2018-01-23T03:13:58.858Z,1516677238.858 [Supervisor](DEBUG): Initializing supervisor. 2018-01-23T03:13:58.860Z,1516677238.860 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0 2018-01-23T03:13:58.861Z,1516677238.861 [SyncHandler](INFO): Protected caller Thread ID is 799 2018-01-23T03:13:58.861Z,1516677238.861 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread. 2018-01-23T03:13:58.862Z,1516677238.862 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0 2018-01-23T03:13:58.863Z,1516677238.863 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 800 2018-01-23T03:13:58.865Z,1516677238.865 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread. 2018-01-23T03:13:58.876Z,1516677238.876 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread. 2018-01-23T03:13:58.877Z,1516677238.877 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0 2018-01-23T03:13:58.877Z,1516677238.877 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 801 2018-01-23T03:13:58.878Z,1516677238.878 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread. 2018-01-23T03:13:58.879Z,1516677238.879 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0 2018-01-23T03:13:58.879Z,1516677238.879 [logger ThreadHandler](INFO): Protected caller Thread ID is 802 2018-01-23T03:13:58.881Z,1516677238.881 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread. 2018-01-23T03:13:58.882Z,1516677238.882 [Supervisor](INFO): Looking for Config files in directory: Config/ 2018-01-23T03:13:58.885Z,1516677238.885 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg 2018-01-23T03:13:59.061Z,1516677239.061 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT 2018-01-23T03:13:59.061Z,1516677239.061 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg 2018-01-23T03:13:59.194Z,1516677239.194 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation 2018-01-23T03:13:59.195Z,1516677239.195 [Supervisor](INFO): Opening Config file at: Config/Control.cfg 2018-01-23T03:13:59.503Z,1516677239.503 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control 2018-01-23T03:13:59.504Z,1516677239.504 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg 2018-01-23T03:13:59.634Z,1516677239.634 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation 2018-01-23T03:13:59.636Z,1516677239.636 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg 2018-01-23T03:13:59.716Z,1516677239.716 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg 2018-01-23T03:13:59.905Z,1516677239.905 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation 2018-01-23T03:13:59.907Z,1516677239.907 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg 2018-01-23T03:14:00.003Z,1516677240.003 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample 2018-01-23T03:14:00.004Z,1516677240.004 [Supervisor](INFO): Opening Config file at: Config/Science.cfg 2018-01-23T03:14:00.315Z,1516677240.315 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science 2018-01-23T03:14:00.316Z,1516677240.316 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg 2018-01-23T03:14:00.645Z,1516677240.645 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor 2018-01-23T03:14:00.645Z,1516677240.645 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg 2018-01-23T03:14:00.925Z,1516677240.925 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo 2018-01-23T03:14:00.926Z,1516677240.926 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg 2018-01-23T03:14:01.404Z,1516677241.404 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator 2018-01-23T03:14:01.405Z,1516677241.405 [Supervisor](INFO): Opening Config file at: Config/logger.cfg 2018-01-23T03:14:01.597Z,1516677241.597 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger 2018-01-23T03:14:01.597Z,1516677241.597 [Supervisor](INFO): Opening Config file at: Config/secure.cfg 2018-01-23T03:14:01.694Z,1516677241.694 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure 2018-01-23T03:14:01.694Z,1516677241.694 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg 2018-01-23T03:14:02.132Z,1516677242.132 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle 2018-01-23T03:14:02.134Z,1516677242.134 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg 2018-01-23T03:14:02.242Z,1516677242.242 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite 2018-01-23T03:14:02.244Z,1516677242.244 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-ahi/ 2018-01-23T03:14:03.161Z,1516677243.161 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Battery.cfg 2018-01-23T03:14:03.396Z,1516677243.396 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery 2018-01-23T03:14:03.396Z,1516677243.396 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/BIT.cfg 2018-01-23T03:14:06.762Z,1516677246.762 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Navigation.cfg 2018-01-23T03:14:06.863Z,1516677246.863 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Control.cfg 2018-01-23T03:14:06.957Z,1516677246.957 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Simulator.cfg 2018-01-23T03:14:07.042Z,1516677247.042 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Science.cfg 2018-01-23T03:14:07.180Z,1516677247.180 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Sensor.cfg 2018-01-23T03:14:07.359Z,1516677247.359 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/Servo.cfg 2018-01-23T03:14:07.543Z,1516677247.543 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/logger.cfg 2018-01-23T03:14:07.638Z,1516677247.638 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/secure.cfg 2018-01-23T03:14:07.721Z,1516677247.721 [Supervisor](INFO): Opening Config file at: Config/lrauv-ahi/vehicle.cfg 2018-01-23T03:14:07.877Z,1516677247.877 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-01-23T03:14:07.886Z,1516677247.886 [Module Loader](DEBUG): Loading Module at Modules/BIT.so 2018-01-23T03:14:08.036Z,1516677248.036 [SBIT](DEBUG): Construct Startup Built In Test. 2018-01-23T03:14:08.067Z,1516677248.067 [SBIT] Loaded 2018-01-23T03:14:08.067Z,1516677248.067 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread. 2018-01-23T03:14:08.068Z,1516677248.068 [IBIT](DEBUG): Construct Initiated Built In Test. 2018-01-23T03:14:08.094Z,1516677248.094 [IBIT] Loaded 2018-01-23T03:14:08.095Z,1516677248.095 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread. 2018-01-23T03:14:08.098Z,1516677248.098 [CBIT](DEBUG): Construct Continuous Built In Test. 2018-01-23T03:14:08.246Z,1516677248.246 [CBIT] Loaded 2018-01-23T03:14:08.246Z,1516677248.246 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread. 2018-01-23T03:14:08.247Z,1516677248.247 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test) 2018-01-23T03:14:08.249Z,1516677248.249 [Module Loader](DEBUG): Loading Module at Modules/Control.so 2018-01-23T03:14:08.342Z,1516677248.342 [VerticalControl](DEBUG): Construct VerticalControl. 2018-01-23T03:14:08.437Z,1516677248.437 [VerticalControl] Loaded 2018-01-23T03:14:08.438Z,1516677248.438 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread. 2018-01-23T03:14:08.438Z,1516677248.438 [HorizontalControl](DEBUG): Construct HorizontalControl. 2018-01-23T03:14:08.496Z,1516677248.496 [HorizontalControl] Loaded 2018-01-23T03:14:08.496Z,1516677248.496 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread. 2018-01-23T03:14:08.497Z,1516677248.497 [SpeedControl](DEBUG): Construct SpeedControl. 2018-01-23T03:14:08.503Z,1516677248.503 [SpeedControl] Loaded 2018-01-23T03:14:08.503Z,1516677248.503 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread. 2018-01-23T03:14:08.503Z,1516677248.503 [LoopControl](DEBUG): Construct LoopControl. 2018-01-23T03:14:08.504Z,1516677248.504 [LoopControl] Loaded 2018-01-23T03:14:08.504Z,1516677248.504 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread. 2018-01-23T03:14:08.505Z,1516677248.505 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control) 2018-01-23T03:14:08.505Z,1516677248.505 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so 2018-01-23T03:14:08.560Z,1516677248.560 [DepthRateCalculator] Loaded 2018-01-23T03:14:08.560Z,1516677248.560 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread. 2018-01-23T03:14:08.565Z,1516677248.565 [PitchRateCalculator] Loaded 2018-01-23T03:14:08.565Z,1516677248.565 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread. 2018-01-23T03:14:08.581Z,1516677248.581 [SpeedCalculator] Loaded 2018-01-23T03:14:08.581Z,1516677248.581 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread. 2018-01-23T03:14:08.602Z,1516677248.602 [TempGradientCalculator] Loaded 2018-01-23T03:14:08.602Z,1516677248.602 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread. 2018-01-23T03:14:08.617Z,1516677248.617 [VerticalTemperatureHomogeneityIndexCalculator] Loaded 2018-01-23T03:14:08.617Z,1516677248.617 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread. 2018-01-23T03:14:08.622Z,1516677248.622 [YawRateCalculator] Loaded 2018-01-23T03:14:08.622Z,1516677248.622 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread. 2018-01-23T03:14:08.622Z,1516677248.622 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components) 2018-01-23T03:14:08.624Z,1516677248.624 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so 2018-01-23T03:14:08.748Z,1516677248.748 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC 2018-01-23T03:14:08.748Z,1516677248.748 [StratificationFrontDetector](DEBUG): (re)initializing 2018-01-23T03:14:08.748Z,1516677248.748 [StratificationFrontDetector] Loaded 2018-01-23T03:14:08.749Z,1516677248.749 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread. 2018-01-23T03:14:08.749Z,1516677248.749 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components) 2018-01-23T03:14:08.750Z,1516677248.750 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so 2018-01-23T03:14:09.020Z,1516677249.020 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands) 2018-01-23T03:14:09.022Z,1516677249.022 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so 2018-01-23T03:14:09.132Z,1516677249.132 [DeadReckonUsingMultipleVelocitySources] Loaded 2018-01-23T03:14:09.132Z,1516677249.132 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread. 2018-01-23T03:14:09.184Z,1516677249.184 [DeadReckonUsingSpeedCalculator] Loaded 2018-01-23T03:14:09.184Z,1516677249.184 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread. 2018-01-23T03:14:09.237Z,1516677249.237 [DeadReckonWithRespectToSeafloor] Loaded 2018-01-23T03:14:09.238Z,1516677249.238 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread. 2018-01-23T03:14:09.253Z,1516677249.253 [NavChart] Loaded 2018-01-23T03:14:09.254Z,1516677249.254 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread. 2018-01-23T03:14:09.257Z,1516677249.257 [UniversalFixResidualReporter] Loaded 2018-01-23T03:14:09.258Z,1516677249.258 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread. 2018-01-23T03:14:09.258Z,1516677249.258 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components) 2018-01-23T03:14:09.259Z,1516677249.259 [Module Loader](DEBUG): Loading Module at Modules/Sample.so 2018-01-23T03:14:09.284Z,1516677249.284 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components) 2018-01-23T03:14:09.285Z,1516677249.285 [Module Loader](DEBUG): Loading Module at Modules/Science.so 2018-01-23T03:14:09.481Z,1516677249.481 [Aanderaa_O2] Loaded 2018-01-23T03:14:09.482Z,1516677249.482 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread. 2018-01-23T03:14:09.527Z,1516677249.527 [CTD_Seabird] Loaded 2018-01-23T03:14:09.528Z,1516677249.528 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread. 2018-01-23T03:14:09.529Z,1516677249.529 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 406D54E0 2018-01-23T03:14:09.529Z,1516677249.529 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 881 2018-01-23T03:14:09.543Z,1516677249.543 [PAR_Licor] Loaded 2018-01-23T03:14:09.544Z,1516677249.544 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread. 2018-01-23T03:14:09.591Z,1516677249.591 [WetLabsBB2FL] Loaded 2018-01-23T03:14:09.592Z,1516677249.592 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread. 2018-01-23T03:14:09.593Z,1516677249.593 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407054E0 2018-01-23T03:14:09.593Z,1516677249.593 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 882 2018-01-23T03:14:09.594Z,1516677249.594 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components) 2018-01-23T03:14:09.594Z,1516677249.594 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so 2018-01-23T03:14:10.119Z,1516677250.119 [DataOverHttps] Loaded 2018-01-23T03:14:10.120Z,1516677250.120 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread. 2018-01-23T03:14:10.132Z,1516677250.132 [Depth_Keller] Loaded 2018-01-23T03:14:10.133Z,1516677250.133 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread. 2018-01-23T03:14:10.221Z,1516677250.221 [NAL9602] Loaded 2018-01-23T03:14:10.221Z,1516677250.221 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread. 2018-01-23T03:14:10.226Z,1516677250.226 [Onboard] Loaded 2018-01-23T03:14:10.227Z,1516677250.227 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread. 2018-01-23T03:14:10.233Z,1516677250.233 [Radio_Surface] Loaded 2018-01-23T03:14:10.234Z,1516677250.234 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread. 2018-01-23T03:14:10.235Z,1516677250.235 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409494E0 2018-01-23T03:14:10.235Z,1516677250.235 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 883 2018-01-23T03:14:10.360Z,1516677250.360 [DAT] Loaded 2018-01-23T03:14:10.360Z,1516677250.360 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread. 2018-01-23T03:14:10.512Z,1516677250.512 [PNI_TCM] Loaded 2018-01-23T03:14:10.513Z,1516677250.513 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread. 2018-01-23T03:14:10.513Z,1516677250.513 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components) 2018-01-23T03:14:10.515Z,1516677250.515 [Module Loader](DEBUG): Loading Module at Modules/Servo.so 2018-01-23T03:14:10.631Z,1516677250.631 [BuoyancyServo] Loaded 2018-01-23T03:14:10.631Z,1516677250.631 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread. 2018-01-23T03:14:10.642Z,1516677250.642 [ElevatorServo] Loaded 2018-01-23T03:14:10.642Z,1516677250.642 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread. 2018-01-23T03:14:10.653Z,1516677250.653 [MassServo] Loaded 2018-01-23T03:14:10.653Z,1516677250.653 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread. 2018-01-23T03:14:10.665Z,1516677250.665 [RudderServo] Loaded 2018-01-23T03:14:10.665Z,1516677250.665 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread. 2018-01-23T03:14:10.675Z,1516677250.675 [ThrusterServo] Loaded 2018-01-23T03:14:10.676Z,1516677250.676 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread. 2018-01-23T03:14:10.676Z,1516677250.676 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers) 2018-01-23T03:14:10.677Z,1516677250.677 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so 2018-01-23T03:14:10.798Z,1516677250.798 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator) 2018-01-23T03:14:10.799Z,1516677250.799 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so 2018-01-23T03:14:10.835Z,1516677250.835 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions) 2018-01-23T03:14:10.839Z,1516677250.839 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread. 2018-01-23T03:14:10.840Z,1516677250.840 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread. 2018-01-23T03:14:10.846Z,1516677250.846 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread. 2018-01-23T03:14:10.847Z,1516677250.847 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409F04E0 2018-01-23T03:14:10.848Z,1516677250.848 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 884 2018-01-23T03:14:10.852Z,1516677250.852 [Supervisor](INFO): Main Thread ID is 795 2018-01-23T03:14:10.852Z,1516677250.852 [Supervisor](DEBUG): Running supervisor. 2018-01-23T03:14:10.853Z,1516677250.853 [CommandLine ThreadHandler](INFO): Handler Thread ID is 885 2018-01-23T03:14:10.855Z,1516677250.855 [controlThread ThreadHandler](INFO): Handler Thread ID is 886 2018-01-23T03:14:10.856Z,1516677250.856 [controlThread](DEBUG): Initializing ControlThread 2018-01-23T03:14:10.857Z,1516677250.857 [SBIT](INFO): Initialize SBIT Component. 2018-01-23T03:14:10.857Z,1516677250.857 [SBIT](IMPORTANT): git: 2017-12-12-45-gad4d7da 2018-01-23T03:14:10.857Z,1516677250.857 [SBIT](INFO): git hash: ad4d7da944cc2b4b9cb3d42bd51580e7a7943521 2018-01-23T03:14:10.858Z,1516677250.858 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-01-23T03:14:10.859Z,1516677250.859 [SBIT](INFO): Kernel Reporting Different Version From Configuration. Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014 Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018 2018-01-23T03:14:10.860Z,1516677250.860 [SBIT](INFO): Beginning SBIT in 71.000000 seconds. 2018-01-23T03:14:10.860Z,1516677250.860 [IBIT](INFO): Initialize IBIT Component. 2018-01-23T03:14:10.861Z,1516677250.861 [CBIT](DEBUG): Initialize CBIT Component. 2018-01-23T03:14:10.861Z,1516677250.861 [CBIT](INFO): Last reboot was NOT due to watchdog timer. 2018-01-23T03:14:10.862Z,1516677250.862 [logger ThreadHandler](INFO): Handler Thread ID is 887 2018-01-23T03:14:10.879Z,1516677250.879 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 888 2018-01-23T03:14:10.880Z,1516677250.880 [CTD_Seabird](INFO): Initializing 2018-01-23T03:14:10.880Z,1516677250.880 [CTD_Seabird](INFO): Checking LCM 2018-01-23T03:14:10.971Z,1516677250.971 [VerticalControl](DEBUG): Initialize VerticalControlComponent. 2018-01-23T03:14:10.972Z,1516677250.972 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent. 2018-01-23T03:14:10.973Z,1516677250.973 [SpeedControl](DEBUG): Initialize SpeedControlComponent. 2018-01-23T03:14:10.973Z,1516677250.973 [LoopControl](DEBUG): Initialize LoopControlComponent. 2018-01-23T03:14:10.974Z,1516677250.974 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator. 2018-01-23T03:14:10.974Z,1516677250.974 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator. 2018-01-23T03:14:10.974Z,1516677250.974 [SpeedCalculator](DEBUG): Initializing SpeedCalculator. 2018-01-23T03:14:10.974Z,1516677250.974 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator. 2018-01-23T03:14:10.975Z,1516677250.975 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing 2018-01-23T03:14:10.976Z,1516677250.976 [YawRateCalculator](DEBUG): Initializing YawRateCalculator. 2018-01-23T03:14:10.976Z,1516677250.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:14:10.977Z,1516677250.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:14:10.977Z,1516677250.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:14:10.977Z,1516677250.977 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:14:10.978Z,1516677250.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:14:10.978Z,1516677250.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:14:10.979Z,1516677250.979 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:14:10.979Z,1516677250.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:14:10.979Z,1516677250.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:14:10.980Z,1516677250.980 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 889 2018-01-23T03:14:10.981Z,1516677250.981 [WetLabsBB2FL](INFO): Powering down 2018-01-23T03:14:11.007Z,1516677251.007 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 890 2018-01-23T03:14:11.012Z,1516677251.012 [NavChart](DEBUG): Initialize NavChart Navigation. 2018-01-23T03:14:11.012Z,1516677251.012 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component. 2018-01-23T03:14:11.017Z,1516677251.017 [MissionManager](INFO): Loading Mission: Missions/Startup.xml 2018-01-23T03:14:11.025Z,1516677251.025 [Radio_Surface](INFO): Powering up 2018-01-23T03:14:11.115Z,1516677251.115 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 891 2018-01-23T03:14:11.124Z,1516677251.124 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000 2018-01-23T03:14:11.124Z,1516677251.124 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000 2018-01-23T03:14:11.124Z,1516677251.124 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000 2018-01-23T03:14:11.124Z,1516677251.124 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000 2018-01-23T03:14:11.124Z,1516677251.124 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000 2018-01-23T03:14:11.125Z,1516677251.125 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000 2018-01-23T03:14:11.126Z,1516677251.126 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000 2018-01-23T03:14:11.126Z,1516677251.126 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000 2018-01-23T03:14:11.126Z,1516677251.126 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000 2018-01-23T03:14:11.126Z,1516677251.126 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000 2018-01-23T03:14:11.126Z,1516677251.126 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000 2018-01-23T03:14:11.137Z,1516677251.137 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T03:14:11.227Z,1516677251.227 [MissionManager](DEBUG): 2018-01-23T03:14:11.228Z,1516677251.228 [MissionManager](INFO): Loading Mission: Missions/Default.xml 2018-01-23T03:14:11.334Z,1516677251.334 [CTD_Seabird](INFO): LCM OK 2018-01-23T03:14:11.335Z,1516677251.335 [CTD_Seabird](INFO): Powering up 2018-01-23T03:14:11.343Z,1516677251.343 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min 2018-01-23T03:14:11.344Z,1516677251.344 [Default:A.Wait](DEBUG): Construct Wait. 2018-01-23T03:14:11.346Z,1516677251.346 [Default:B.GoToSurface](DEBUG): Construct GoToSurface. 2018-01-23T03:14:11.384Z,1516677251.384 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute. 2018-01-23T03:14:11.386Z,1516677251.386 [Default:CheckIn:C.Wait](DEBUG): Construct Wait. 2018-01-23T03:14:11.413Z,1516677251.413 [Default:E.Execute](DEBUG): Construct Execute. 2018-01-23T03:14:11.430Z,1516677251.430 [MissionManager](DEBUG): 0 Wait a moment to see if the scheduler starts a new mission before starting to actually run Default. 13 Burn 300 Dropped weight due to communications timeout. 5 Default mission has been running for Restarting logs and Default mission. restart logs 2018-01-23T03:14:11.435Z,1516677251.435 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,PAR_Licor,DataOverHttps,Depth_Keller,NAL9602,Onboard,DAT,PNI_TCM,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter, 2018-01-23T03:14:11.495Z,1516677251.495 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP 2018-01-23T03:14:11.618Z,1516677251.618 [DAT](INFO): Powering up 2018-01-23T03:14:11.618Z,1516677251.618 [DAT](DEBUG): Initializing DAT. 2018-01-23T03:14:11.783Z,1516677251.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:11.783Z,1516677251.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:11.858Z,1516677251.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:11.871Z,1516677251.871 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:11.883Z,1516677251.883 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:11.995Z,1516677251.995 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:12.003Z,1516677252.003 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-01-23T03:14:12.029Z,1516677252.029 [ElevatorServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:12.035Z,1516677252.035 [ElevatorServo](DEBUG): Initializing ElevatorServo. 2018-01-23T03:14:12.040Z,1516677252.040 [MassServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:12.047Z,1516677252.047 [MassServo](DEBUG): Initializing MassServo. 2018-01-23T03:14:12.052Z,1516677252.052 [RudderServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:12.059Z,1516677252.059 [RudderServo](DEBUG): Initializing RudderServo. 2018-01-23T03:14:12.083Z,1516677252.083 [ThrusterServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:12.091Z,1516677252.091 [ThrusterServo](DEBUG): Initializing ThrusterServo. 2018-01-23T03:14:12.451Z,1516677252.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.451Z,1516677252.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:12.452Z,1516677252.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:12.453Z,1516677252.453 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.454Z,1516677252.454 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.600Z,1516677252.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.600Z,1516677252.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:12.601Z,1516677252.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:12.602Z,1516677252.602 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.620Z,1516677252.620 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:12.951Z,1516677252.951 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout 2018-01-23T03:14:12.951Z,1516677252.951 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-01-23T03:14:12.951Z,1516677252.951 [BuoyancyServo] Communications Fault, FailCount= 1 2018-01-23T03:14:12.951Z,1516677252.951 [BuoyancyServo](ERROR): Communications Fault 2018-01-23T03:14:13.159Z,1516677253.159 [CBIT](ERROR): Communications Fault in component: BuoyancyServo 2018-01-23T03:14:13.226Z,1516677253.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:13.227Z,1516677253.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:13.228Z,1516677253.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:13.235Z,1516677253.235 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:13.236Z,1516677253.236 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:13.248Z,1516677253.248 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-01-23T03:14:13.249Z,1516677253.249 [BuoyancyServo](INFO): Powering down 2018-01-23T03:14:13.611Z,1516677253.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:13.611Z,1516677253.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:13.612Z,1516677253.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:13.613Z,1516677253.613 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:13.613Z,1516677253.613 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.018Z,1516677254.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.018Z,1516677254.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:14.019Z,1516677254.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:14.020Z,1516677254.020 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.021Z,1516677254.021 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.402Z,1516677254.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.402Z,1516677254.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:14.403Z,1516677254.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:14.411Z,1516677254.411 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.412Z,1516677254.412 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.887Z,1516677254.887 [Aanderaa_O2](INFO): Powering down 2018-01-23T03:14:14.998Z,1516677254.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:14.998Z,1516677254.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:14.999Z,1516677254.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:15.007Z,1516677255.007 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:15.008Z,1516677255.008 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet. 2018-01-23T03:14:15.237Z,1516677255.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:15.238Z,1516677255.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:15.300Z,1516677255.300 [CBIT](INFO): Clearing failed state for component BuoyancyServo 2018-01-23T03:14:15.300Z,1516677255.300 [BuoyancyServo] No Fault, FailCount= 1 2018-01-23T03:14:15.667Z,1516677255.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:15.668Z,1516677255.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:15.699Z,1516677255.699 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-01-23T03:14:15.820Z,1516677255.820 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-01-23T03:14:16.058Z,1516677256.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid. 2018-01-23T03:14:16.067Z,1516677256.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:16.448Z,1516677256.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:16.595Z,1516677256.595 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T03:14:16.687Z,1516677256.687 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null & 2018-01-23T03:14:16.876Z,1516677256.876 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd 2018-01-23T03:14:16.950Z,1516677256.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:17.293Z,1516677257.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:17.304Z,1516677257.304 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface 2018-01-23T03:14:17.304Z,1516677257.304 [CTD_Seabird](INFO): Powering down 2018-01-23T03:14:17.631Z,1516677257.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:18.014Z,1516677258.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:18.428Z,1516677258.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:18.813Z,1516677258.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:19.244Z,1516677259.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:19.609Z,1516677259.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:20.021Z,1516677260.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:20.444Z,1516677260.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:20.832Z,1516677260.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:20.996Z,1516677260.996 [CBIT](CRITICAL): Environmental Failure. Press:14.421543 PSI. Humidity:30%. Temp:25 C. ABORTING MISSION 2018-01-23T03:14:20.996Z,1516677260.996 [Supervisor](INFO): Stop Mission called by CBIT::monitorEnvironmentals 2018-01-23T03:14:21.221Z,1516677261.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:21.274Z,1516677261.274 [CommandLine](FAULT): Scheduling is paused 2018-01-23T03:14:21.275Z,1516677261.275 [CBIT](INFO): Critical error at 20180123T031420 2018-01-23T03:14:21.632Z,1516677261.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:22.036Z,1516677262.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:22.414Z,1516677262.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:22.836Z,1516677262.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:23.240Z,1516677263.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:23.633Z,1516677263.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:24.045Z,1516677264.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:24.425Z,1516677264.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:24.817Z,1516677264.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:25.193Z,1516677265.193 [DAT](INFO): setting local address to 1 2018-01-23T03:14:25.255Z,1516677265.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:25.593Z,1516677265.593 [DAT](INFO): set local address to 1 2018-01-23T03:14:25.648Z,1516677265.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:26.025Z,1516677266.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:26.413Z,1516677266.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:26.825Z,1516677266.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:27.217Z,1516677267.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:27.633Z,1516677267.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:28.058Z,1516677268.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:28.413Z,1516677268.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:28.820Z,1516677268.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:29.234Z,1516677269.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:29.623Z,1516677269.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:30.036Z,1516677270.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:30.436Z,1516677270.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:30.817Z,1516677270.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:31.236Z,1516677271.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:31.636Z,1516677271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:32.044Z,1516677272.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:32.427Z,1516677272.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:32.859Z,1516677272.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:33.213Z,1516677273.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:33.678Z,1516677273.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:34.041Z,1516677274.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:34.420Z,1516677274.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:34.828Z,1516677274.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:35.228Z,1516677275.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:35.627Z,1516677275.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:36.034Z,1516677276.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:36.436Z,1516677276.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:36.829Z,1516677276.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:37.239Z,1516677277.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:37.648Z,1516677277.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:38.045Z,1516677278.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:38.441Z,1516677278.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:38.849Z,1516677278.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:39.221Z,1516677279.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:39.652Z,1516677279.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:40.048Z,1516677280.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:40.372Z,1516677280.372 [NAL9602](INFO): Powering up NAL9602 2018-01-23T03:14:40.425Z,1516677280.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:40.828Z,1516677280.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:41.216Z,1516677281.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:41.625Z,1516677281.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:42.056Z,1516677282.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:42.451Z,1516677282.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:42.833Z,1516677282.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:43.236Z,1516677283.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:43.657Z,1516677283.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:44.021Z,1516677284.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:44.479Z,1516677284.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:44.859Z,1516677284.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:45.217Z,1516677285.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:45.625Z,1516677285.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:46.033Z,1516677286.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:46.431Z,1516677286.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:46.841Z,1516677286.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:47.229Z,1516677287.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:47.639Z,1516677287.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:48.041Z,1516677288.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:48.448Z,1516677288.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:48.816Z,1516677288.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:49.248Z,1516677289.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:49.647Z,1516677289.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:50.012Z,1516677290.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:50.443Z,1516677290.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:50.849Z,1516677290.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:51.184Z,1516677291.184 [NAL9602](INFO): NAL9602 initialized 2018-01-23T03:14:51.245Z,1516677291.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:51.643Z,1516677291.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:52.037Z,1516677292.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:52.441Z,1516677292.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:52.854Z,1516677292.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:53.233Z,1516677293.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:53.617Z,1516677293.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:54.056Z,1516677294.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:54.451Z,1516677294.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:54.825Z,1516677294.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:55.229Z,1516677295.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:55.625Z,1516677295.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:56.021Z,1516677296.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:56.452Z,1516677296.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:56.821Z,1516677296.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:57.307Z,1516677297.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:57.652Z,1516677297.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:58.029Z,1516677298.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:58.421Z,1516677298.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:58.844Z,1516677298.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:59.237Z,1516677299.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:14:59.635Z,1516677299.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:00.068Z,1516677300.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:00.437Z,1516677300.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:00.831Z,1516677300.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:01.248Z,1516677301.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:01.613Z,1516677301.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:02.029Z,1516677302.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:02.428Z,1516677302.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:02.821Z,1516677302.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:03.222Z,1516677303.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:03.628Z,1516677303.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:04.037Z,1516677304.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:04.437Z,1516677304.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:04.836Z,1516677304.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:05.228Z,1516677305.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:05.620Z,1516677305.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:06.029Z,1516677306.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:06.421Z,1516677306.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:06.821Z,1516677306.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:07.224Z,1516677307.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:07.602Z,1516677307.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:08.004Z,1516677308.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:08.404Z,1516677308.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:08.802Z,1516677308.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:09.232Z,1516677309.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:09.632Z,1516677309.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:10.032Z,1516677310.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:10.426Z,1516677310.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:10.840Z,1516677310.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:11.202Z,1516677311.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:11.635Z,1516677311.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:12.016Z,1516677312.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:12.404Z,1516677312.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:12.835Z,1516677312.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:13.216Z,1516677313.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:13.613Z,1516677313.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:14.013Z,1516677314.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:14.425Z,1516677314.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:14.815Z,1516677314.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:15.214Z,1516677315.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:15.613Z,1516677315.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:16.019Z,1516677316.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:16.414Z,1516677316.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:16.816Z,1516677316.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:17.214Z,1516677317.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:17.611Z,1516677317.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:18.012Z,1516677318.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:18.416Z,1516677318.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:18.820Z,1516677318.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:19.216Z,1516677319.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:19.622Z,1516677319.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:20.021Z,1516677320.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:20.425Z,1516677320.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:20.827Z,1516677320.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:21.217Z,1516677321.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:21.620Z,1516677321.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:22.017Z,1516677322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:22.417Z,1516677322.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:22.426Z,1516677322.426 [SBIT](IMPORTANT): Beginning Startup BIT 2018-01-23T03:15:22.430Z,1516677322.430 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-23T03:15:22.820Z,1516677322.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:23.214Z,1516677323.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:23.626Z,1516677323.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:24.020Z,1516677324.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:24.418Z,1516677324.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:24.966Z,1516677324.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:25.350Z,1516677325.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:25.742Z,1516677325.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:26.138Z,1516677326.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:26.541Z,1516677326.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:26.936Z,1516677326.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:27.337Z,1516677327.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:27.741Z,1516677327.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:28.136Z,1516677328.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:28.536Z,1516677328.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:28.938Z,1516677328.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:29.334Z,1516677329.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:29.738Z,1516677329.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:30.145Z,1516677330.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:30.553Z,1516677330.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:30.951Z,1516677330.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:31.346Z,1516677331.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:31.748Z,1516677331.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:32.142Z,1516677332.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:32.545Z,1516677332.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:32.949Z,1516677332.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:33.344Z,1516677333.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:33.483Z,1516677333.483 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.004360 CHAN A1 (24V): -0.008076 CHAN A2 (12V): 0.000634 CHAN A3 (5V): -0.001086 CHAN B0 (3.3V): 0.000382 CHAN B1 (3.15aV): 0.000320 CHAN B2 (3.15bV): -0.000051 CHAN B3 (GND): -0.000324 OPEN: 0.005291 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-23T03:15:33.755Z,1516677333.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:34.136Z,1516677334.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:34.536Z,1516677334.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:34.933Z,1516677334.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:35.366Z,1516677335.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:35.765Z,1516677335.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:36.165Z,1516677336.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:36.565Z,1516677336.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:36.941Z,1516677336.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:37.345Z,1516677337.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:37.738Z,1516677337.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:38.322Z,1516677338.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:38.706Z,1516677338.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:39.140Z,1516677339.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:39.509Z,1516677339.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:39.917Z,1516677339.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:40.318Z,1516677340.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:40.745Z,1516677340.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:41.133Z,1516677341.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:41.518Z,1516677341.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:41.942Z,1516677341.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:42.311Z,1516677342.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:42.713Z,1516677342.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:43.110Z,1516677343.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:43.517Z,1516677343.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:43.912Z,1516677343.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:44.312Z,1516677344.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:44.722Z,1516677344.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:45.116Z,1516677345.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:45.520Z,1516677345.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:45.925Z,1516677345.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:46.326Z,1516677346.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:46.727Z,1516677346.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:47.125Z,1516677347.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:47.520Z,1516677347.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:47.914Z,1516677347.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:48.319Z,1516677348.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:48.723Z,1516677348.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:49.120Z,1516677349.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:49.520Z,1516677349.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:49.924Z,1516677349.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:50.317Z,1516677350.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:50.723Z,1516677350.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:51.126Z,1516677351.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:51.531Z,1516677351.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:51.929Z,1516677351.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:52.335Z,1516677352.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:52.724Z,1516677352.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:53.129Z,1516677353.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:53.503Z,1516677353.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:53.937Z,1516677353.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:54.317Z,1516677354.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:54.712Z,1516677354.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:55.117Z,1516677355.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:55.512Z,1516677355.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:55.909Z,1516677355.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:56.325Z,1516677356.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:56.718Z,1516677356.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:57.121Z,1516677357.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:57.518Z,1516677357.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:57.911Z,1516677357.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:58.316Z,1516677358.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:58.716Z,1516677358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:59.111Z,1516677359.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:59.510Z,1516677359.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:15:59.912Z,1516677359.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:00.311Z,1516677360.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:00.710Z,1516677360.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:01.113Z,1516677361.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:01.525Z,1516677361.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:01.920Z,1516677361.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:02.322Z,1516677362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:02.725Z,1516677362.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:03.114Z,1516677363.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:03.514Z,1516677363.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:03.917Z,1516677363.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:04.312Z,1516677364.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:04.721Z,1516677364.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:05.257Z,1516677365.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:05.646Z,1516677365.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:06.051Z,1516677366.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:06.450Z,1516677366.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:06.857Z,1516677366.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:07.260Z,1516677367.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:07.654Z,1516677367.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:08.049Z,1516677368.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:08.447Z,1516677368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:08.857Z,1516677368.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:09.234Z,1516677369.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:09.654Z,1516677369.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:10.054Z,1516677370.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:10.457Z,1516677370.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:10.853Z,1516677370.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:11.233Z,1516677371.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:11.633Z,1516677371.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:12.042Z,1516677372.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:12.446Z,1516677372.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:12.850Z,1516677372.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:13.249Z,1516677373.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:13.634Z,1516677373.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:14.033Z,1516677374.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:14.444Z,1516677374.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:14.839Z,1516677374.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:15.234Z,1516677375.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:15.636Z,1516677375.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:16.040Z,1516677376.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:16.452Z,1516677376.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:16.481Z,1516677376.481 [SBIT](IMPORTANT): SBIT PASSED 2018-01-23T03:16:16.832Z,1516677376.832 [PNI_TCM](ERROR): CRC does not match. Expected:0x43760 got:0x32768 2018-01-23T03:16:16.857Z,1516677376.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:16.876Z,1516677376.876 [MissionManager](IMPORTANT): Started mission Startup 2018-01-23T03:16:16.876Z,1516677376.876 [Startup] Running Loop=1 2018-01-23T03:16:16.876Z,1516677376.876 [Startup](DEBUG): Aggregate::initialize Startup 2018-01-23T03:16:16.876Z,1516677376.876 [Startup:A.GoToSurface] Running Loop=1 2018-01-23T03:16:16.876Z,1516677376.876 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T03:16:16.877Z,1516677376.877 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T03:16:16.877Z,1516677376.877 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T03:16:16.878Z,1516677376.878 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T03:16:16.878Z,1516677376.878 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T03:16:16.883Z,1516677376.883 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T03:16:16.893Z,1516677376.893 [Startup:StartupSatComms] Running Loop=1 2018-01-23T03:16:16.893Z,1516677376.893 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms 2018-01-23T03:16:16.893Z,1516677376.893 [Startup:StartupSatComms:A] Running Loop=1 2018-01-23T03:16:17.249Z,1516677377.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:17.253Z,1516677377.253 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix 2018-01-23T03:16:17.646Z,1516677377.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:18.053Z,1516677378.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:18.449Z,1516677378.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:18.842Z,1516677378.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:19.244Z,1516677379.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:19.652Z,1516677379.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:20.048Z,1516677380.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:20.439Z,1516677380.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:20.826Z,1516677380.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:21.260Z,1516677381.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:21.658Z,1516677381.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:22.031Z,1516677382.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:22.454Z,1516677382.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:22.861Z,1516677382.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:23.242Z,1516677383.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:23.637Z,1516677383.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:24.036Z,1516677384.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:24.479Z,1516677384.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:24.835Z,1516677384.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:25.234Z,1516677385.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:25.637Z,1516677385.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:26.062Z,1516677386.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:26.457Z,1516677386.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:26.835Z,1516677386.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:27.233Z,1516677387.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:27.657Z,1516677387.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:28.039Z,1516677388.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:28.438Z,1516677388.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:28.836Z,1516677388.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:29.260Z,1516677389.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:29.637Z,1516677389.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:30.036Z,1516677390.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:30.434Z,1516677390.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:30.860Z,1516677390.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:31.280Z,1516677391.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:31.635Z,1516677391.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:32.035Z,1516677392.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:32.464Z,1516677392.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:35.565Z,1516677395.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:35.693Z,1516677395.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:36.077Z,1516677396.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:36.411Z,1516677396.411 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003706 2018-01-23T03:16:36.484Z,1516677396.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:36.843Z,1516677396.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:37.268Z,1516677397.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:37.675Z,1516677397.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:38.067Z,1516677398.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:38.452Z,1516677398.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:38.869Z,1516677398.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:39.244Z,1516677399.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:39.647Z,1516677399.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:40.049Z,1516677400.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:40.479Z,1516677400.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:40.853Z,1516677400.853 [PNI_TCM](ERROR): CRC does not match. Expected:0x17353 got:0x33296 2018-01-23T03:16:40.873Z,1516677400.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:41.253Z,1516677401.253 [PNI_TCM](ERROR): CRC does not match. Expected:0x48274 got:0x1857 2018-01-23T03:16:41.281Z,1516677401.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:41.663Z,1516677401.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:42.053Z,1516677402.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:42.443Z,1516677402.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:42.846Z,1516677402.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:43.248Z,1516677403.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:43.673Z,1516677403.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:44.043Z,1516677404.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:44.452Z,1516677404.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:44.849Z,1516677404.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:45.242Z,1516677405.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:45.681Z,1516677405.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:46.078Z,1516677406.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:46.453Z,1516677406.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:46.878Z,1516677406.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:47.253Z,1516677407.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:47.649Z,1516677407.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:48.053Z,1516677408.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:48.453Z,1516677408.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:48.843Z,1516677408.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:49.243Z,1516677409.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:49.647Z,1516677409.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:50.043Z,1516677410.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:50.443Z,1516677410.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:50.857Z,1516677410.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:51.256Z,1516677411.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:51.660Z,1516677411.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:52.053Z,1516677412.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:52.443Z,1516677412.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:52.853Z,1516677412.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:53.253Z,1516677413.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:53.646Z,1516677413.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:54.049Z,1516677414.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:54.460Z,1516677414.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:54.843Z,1516677414.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:55.243Z,1516677415.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:55.652Z,1516677415.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:56.056Z,1516677416.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:56.460Z,1516677416.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:56.861Z,1516677416.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:57.254Z,1516677417.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:57.657Z,1516677417.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:58.047Z,1516677418.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:58.444Z,1516677418.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:58.853Z,1516677418.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:59.253Z,1516677419.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:16:59.643Z,1516677419.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:00.049Z,1516677420.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:00.453Z,1516677420.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:00.844Z,1516677420.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:01.258Z,1516677421.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:01.659Z,1516677421.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:02.056Z,1516677422.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:02.457Z,1516677422.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:02.842Z,1516677422.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:03.252Z,1516677423.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:03.635Z,1516677423.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:04.033Z,1516677424.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:04.440Z,1516677424.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:04.847Z,1516677424.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:05.251Z,1516677425.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:05.645Z,1516677425.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:06.044Z,1516677426.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:06.447Z,1516677426.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:06.849Z,1516677426.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:07.257Z,1516677427.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:07.661Z,1516677427.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:08.048Z,1516677428.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:08.448Z,1516677428.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:08.850Z,1516677428.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:09.245Z,1516677429.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:09.655Z,1516677429.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:10.045Z,1516677430.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:10.444Z,1516677430.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:10.853Z,1516677430.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:11.258Z,1516677431.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:11.258Z,1516677431.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-01-23T03:17:11.258Z,1516677431.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:17:11.260Z,1516677431.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:11.260Z,1516677431.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-01-23T03:17:11.260Z,1516677431.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:17:11.262Z,1516677431.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:11.262Z,1516677431.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1 2018-01-23T03:17:11.262Z,1516677431.262 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:17:11.274Z,1516677431.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:17:11.275Z,1516677431.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:17:11.275Z,1516677431.275 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:17:11.677Z,1516677431.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:17:11.677Z,1516677431.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-01-23T03:17:11.677Z,1516677431.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:17:11.677Z,1516677431.677 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-01-23T03:17:11.678Z,1516677431.678 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:17:11.678Z,1516677431.678 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1 2018-01-23T03:17:12.063Z,1516677432.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:17:12.063Z,1516677432.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:17:12.064Z,1516677432.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:17:12.064Z,1516677432.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:17:12.064Z,1516677432.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:17:12.065Z,1516677432.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:17:12.065Z,1516677432.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:17:12.065Z,1516677432.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:17:12.066Z,1516677432.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:17:12.479Z,1516677432.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:17:12.480Z,1516677432.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:12.858Z,1516677432.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:17:12.859Z,1516677432.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:13.264Z,1516677433.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:17:13.265Z,1516677433.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:13.656Z,1516677433.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:17:13.657Z,1516677433.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:14.054Z,1516677434.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:17:14.056Z,1516677434.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:14.455Z,1516677434.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:17:14.456Z,1516677434.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:14.833Z,1516677434.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:17:14.834Z,1516677434.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:15.234Z,1516677435.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:17:15.236Z,1516677435.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:15.640Z,1516677435.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:17:15.641Z,1516677435.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:16.033Z,1516677436.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:17:16.034Z,1516677436.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:16.444Z,1516677436.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:17:16.445Z,1516677436.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:16.870Z,1516677436.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:17:16.871Z,1516677436.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:17.250Z,1516677437.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:17:17.271Z,1516677437.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:17.274Z,1516677437.274 [Startup:StartupSatComms:A](INFO): Timed out from 2018-01-23T03:16:16.9Z 2018-01-23T03:17:17.274Z,1516677437.274 [Startup:StartupSatComms:A] Stopped 2018-01-23T03:17:17.279Z,1516677437.279 [Startup:StartupSatComms:B] Running Loop=1 2018-01-23T03:17:17.649Z,1516677437.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:17:17.650Z,1516677437.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:17.654Z,1516677437.654 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications 2018-01-23T03:17:18.346Z,1516677438.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T03:17:18.347Z,1516677438.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:18.480Z,1516677438.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:17:18.481Z,1516677438.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:21.549Z,1516677441.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T03:17:21.550Z,1516677441.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:21.625Z,1516677441.625 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T030137/Courier0008.lzma 2018-01-23T03:17:21.688Z,1516677441.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:17:21.690Z,1516677441.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:22.037Z,1516677442.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:17:22.038Z,1516677442.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:22.380Z,1516677442.380 [DataOverHttps](INFO): Moved sent file to Logs/20180123T030137/Courier0008.lzma.bak 2018-01-23T03:17:22.380Z,1516677442.380 [DataOverHttps](INFO): SBD MOMSN=7754892 2018-01-23T03:17:22.449Z,1516677442.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:17:22.450Z,1516677442.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:22.946Z,1516677442.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T03:17:22.948Z,1516677442.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:23.256Z,1516677443.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:17:23.257Z,1516677443.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:26.397Z,1516677446.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T03:17:26.398Z,1516677446.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:26.540Z,1516677446.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T03:17:26.541Z,1516677446.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:26.892Z,1516677446.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:17:26.893Z,1516677446.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:27.300Z,1516677447.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:17:27.301Z,1516677447.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:27.684Z,1516677447.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:17:27.685Z,1516677447.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:28.089Z,1516677448.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:17:28.090Z,1516677448.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:31.202Z,1516677451.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T03:17:31.203Z,1516677451.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:31.279Z,1516677451.279 [DataOverHttps](INFO): Sending 143 bytes from file Logs/20180123T031358/Courier0000.lzma 2018-01-23T03:17:31.346Z,1516677451.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:31.713Z,1516677451.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:32.053Z,1516677452.053 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0000.lzma.bak 2018-01-23T03:17:32.053Z,1516677452.053 [DataOverHttps](INFO): SBD MOMSN=7754894 2018-01-23T03:17:32.123Z,1516677452.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:32.743Z,1516677452.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:32.934Z,1516677452.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:36.007Z,1516677456.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:36.141Z,1516677456.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:36.493Z,1516677456.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:36.888Z,1516677456.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:37.297Z,1516677457.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:37.703Z,1516677457.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:40.775Z,1516677460.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:40.853Z,1516677460.853 [DataOverHttps](INFO): Sending 116 bytes from file Logs/20180123T030137/Express0009.lzma 2018-01-23T03:17:40.901Z,1516677460.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:41.300Z,1516677461.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:41.629Z,1516677461.629 [DataOverHttps](INFO): Moved sent file to Logs/20180123T030137/Express0009.lzma.bak 2018-01-23T03:17:41.629Z,1516677461.629 [DataOverHttps](INFO): SBD MOMSN=7754898 2018-01-23T03:17:41.695Z,1516677461.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:42.304Z,1516677462.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:42.504Z,1516677462.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:45.574Z,1516677465.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:45.717Z,1516677465.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:46.079Z,1516677466.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:46.478Z,1516677466.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:46.870Z,1516677466.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:47.280Z,1516677467.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:50.375Z,1516677470.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:50.453Z,1516677470.453 [DataOverHttps](INFO): Sending 614 bytes from file Logs/20180123T031358/Express0001.lzma 2018-01-23T03:17:50.546Z,1516677470.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:50.844Z,1516677470.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:51.197Z,1516677471.197 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0001.lzma.bak 2018-01-23T03:17:51.197Z,1516677471.197 [DataOverHttps](INFO): SBD MOMSN=7754902 2018-01-23T03:17:51.276Z,1516677471.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:51.878Z,1516677471.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:51.885Z,1516677471.885 [Startup:StartupSatComms:B] Stopped 2018-01-23T03:17:51.885Z,1516677471.885 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms 2018-01-23T03:17:51.885Z,1516677471.885 [Startup:StartupSatComms] Stopped 2018-01-23T03:17:51.885Z,1516677471.885 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms 2018-01-23T03:17:51.886Z,1516677471.886 [Startup](INFO): Completed Startup 2018-01-23T03:17:51.886Z,1516677471.886 [MissionManager](INFO): Startup is completed. 2018-01-23T03:17:51.886Z,1516677471.886 [MissionManager](INFO): Uninitializing Mission Startup 2018-01-23T03:17:51.886Z,1516677471.886 [Startup] Stopped 2018-01-23T03:17:51.886Z,1516677471.886 [Startup](DEBUG): Aggregate::uninitialize Startup 2018-01-23T03:17:51.891Z,1516677471.891 [Startup:A.GoToSurface] Stopped 2018-01-23T03:17:51.891Z,1516677471.891 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent. 2018-01-23T03:17:52.057Z,1516677472.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:52.059Z,1516677472.059 [MissionManager](IMPORTANT): Started mission Default 2018-01-23T03:17:52.060Z,1516677472.060 [Default] Running Loop=1 2018-01-23T03:17:52.060Z,1516677472.060 [Default](DEBUG): Aggregate::initialize Default 2018-01-23T03:17:52.060Z,1516677472.060 [Default:B.GoToSurface] Running Loop=1 2018-01-23T03:17:52.060Z,1516677472.060 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-01-23T03:17:52.060Z,1516677472.060 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-01-23T03:17:52.061Z,1516677472.061 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-01-23T03:17:52.061Z,1516677472.061 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-01-23T03:17:52.061Z,1516677472.061 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds. 2018-01-23T03:17:52.062Z,1516677472.062 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-01-23T03:17:52.062Z,1516677472.062 [Default:A.Wait] Running Loop=1 2018-01-23T03:17:52.062Z,1516677472.062 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-01-23T03:17:55.140Z,1516677475.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:55.285Z,1516677475.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:55.613Z,1516677475.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:56.030Z,1516677476.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:56.437Z,1516677476.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:56.813Z,1516677476.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:57.208Z,1516677477.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:57.602Z,1516677477.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:58.004Z,1516677478.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:58.415Z,1516677478.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:58.813Z,1516677478.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:59.213Z,1516677479.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:17:59.603Z,1516677479.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:00.003Z,1516677480.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:00.421Z,1516677480.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:00.815Z,1516677480.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:01.213Z,1516677481.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:01.621Z,1516677481.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:02.007Z,1516677482.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:02.455Z,1516677482.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:02.817Z,1516677482.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:03.213Z,1516677483.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:03.613Z,1516677483.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:04.009Z,1516677484.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:04.405Z,1516677484.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:04.807Z,1516677484.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:05.223Z,1516677485.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:05.231Z,1516677485.231 [Default:A.Wait](INFO): Done Waiting. 2018-01-23T03:18:05.231Z,1516677485.231 [Default:A.Wait] Stopped 2018-01-23T03:18:05.231Z,1516677485.231 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T03:18:05.616Z,1516677485.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:05.619Z,1516677485.619 [Default:CheckIn] Running Loop=1 2018-01-23T03:18:05.619Z,1516677485.619 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T03:18:05.619Z,1516677485.619 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T03:18:06.016Z,1516677486.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:06.020Z,1516677486.020 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix 2018-01-23T03:18:06.425Z,1516677486.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:06.815Z,1516677486.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:07.213Z,1516677487.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:07.611Z,1516677487.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:08.017Z,1516677488.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:08.413Z,1516677488.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:08.813Z,1516677488.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:09.218Z,1516677489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:09.615Z,1516677489.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:10.015Z,1516677490.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:10.417Z,1516677490.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:10.819Z,1516677490.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:11.223Z,1516677491.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:11.630Z,1516677491.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:12.018Z,1516677492.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:12.417Z,1516677492.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:12.817Z,1516677492.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:13.215Z,1516677493.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:13.615Z,1516677493.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:14.018Z,1516677494.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:14.415Z,1516677494.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:14.821Z,1516677494.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:15.218Z,1516677495.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:15.615Z,1516677495.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:16.017Z,1516677496.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:16.428Z,1516677496.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:16.821Z,1516677496.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:17.224Z,1516677497.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:17.621Z,1516677497.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:18.016Z,1516677498.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:18.414Z,1516677498.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:18.820Z,1516677498.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:19.194Z,1516677499.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:19.621Z,1516677499.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:19.996Z,1516677499.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:20.401Z,1516677500.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:20.801Z,1516677500.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:21.235Z,1516677501.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:21.627Z,1516677501.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:22.011Z,1516677502.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:22.407Z,1516677502.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:22.813Z,1516677502.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:23.213Z,1516677503.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:23.604Z,1516677503.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:24.003Z,1516677504.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:24.409Z,1516677504.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:24.807Z,1516677504.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:25.207Z,1516677505.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:25.613Z,1516677505.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:26.007Z,1516677506.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:26.417Z,1516677506.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:26.813Z,1516677506.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:27.214Z,1516677507.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:27.613Z,1516677507.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:28.009Z,1516677508.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:28.413Z,1516677508.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:28.808Z,1516677508.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:29.206Z,1516677509.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:29.607Z,1516677509.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:30.011Z,1516677510.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:30.412Z,1516677510.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:30.816Z,1516677510.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:31.209Z,1516677511.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:31.614Z,1516677511.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:32.027Z,1516677512.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:32.422Z,1516677512.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:32.824Z,1516677512.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:33.208Z,1516677513.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:33.606Z,1516677513.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:34.016Z,1516677514.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:34.414Z,1516677514.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:34.801Z,1516677514.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:35.217Z,1516677515.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:35.618Z,1516677515.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:36.016Z,1516677516.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:36.410Z,1516677516.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:36.823Z,1516677516.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:37.218Z,1516677517.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:37.624Z,1516677517.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:38.021Z,1516677518.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:38.420Z,1516677518.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:38.817Z,1516677518.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:39.199Z,1516677519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:39.629Z,1516677519.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:40.025Z,1516677520.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:40.428Z,1516677520.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:40.801Z,1516677520.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:41.205Z,1516677521.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:41.603Z,1516677521.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:42.033Z,1516677522.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:42.410Z,1516677522.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:42.836Z,1516677522.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:43.206Z,1516677523.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:43.603Z,1516677523.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:44.011Z,1516677524.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:44.400Z,1516677524.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:44.803Z,1516677524.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:45.212Z,1516677525.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:45.613Z,1516677525.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:46.004Z,1516677526.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:46.408Z,1516677526.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:46.800Z,1516677526.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:47.206Z,1516677527.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:47.605Z,1516677527.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:48.036Z,1516677528.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:48.406Z,1516677528.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:48.803Z,1516677528.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:49.201Z,1516677529.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:49.604Z,1516677529.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:50.003Z,1516677530.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:50.402Z,1516677530.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:50.805Z,1516677530.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:51.207Z,1516677531.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:51.609Z,1516677531.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:52.009Z,1516677532.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:52.419Z,1516677532.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:55.509Z,1516677535.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:55.649Z,1516677535.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:56.000Z,1516677536.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:56.403Z,1516677536.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:56.774Z,1516677536.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:57.172Z,1516677537.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:57.580Z,1516677537.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:57.977Z,1516677537.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:58.376Z,1516677538.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:58.775Z,1516677538.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:59.174Z,1516677539.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:59.578Z,1516677539.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:18:59.976Z,1516677539.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:00.393Z,1516677540.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:00.793Z,1516677540.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:01.189Z,1516677541.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:01.585Z,1516677541.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:01.974Z,1516677541.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:02.380Z,1516677542.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:02.775Z,1516677542.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:03.185Z,1516677543.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:03.576Z,1516677543.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:03.980Z,1516677543.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:04.385Z,1516677544.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:04.784Z,1516677544.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:05.177Z,1516677545.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:05.585Z,1516677545.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:05.986Z,1516677545.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:06.390Z,1516677546.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:06.785Z,1516677546.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:07.184Z,1516677547.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:07.585Z,1516677547.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:07.989Z,1516677547.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:08.376Z,1516677548.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:08.778Z,1516677548.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:09.185Z,1516677549.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:09.580Z,1516677549.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:09.984Z,1516677549.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:10.384Z,1516677550.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:10.796Z,1516677550.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:11.195Z,1516677551.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:11.590Z,1516677551.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:11.987Z,1516677551.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:12.384Z,1516677552.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:12.784Z,1516677552.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:13.187Z,1516677553.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:13.585Z,1516677553.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:13.981Z,1516677553.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:14.379Z,1516677554.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:14.777Z,1516677554.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:15.185Z,1516677555.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:15.585Z,1516677555.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:15.990Z,1516677555.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:16.386Z,1516677556.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:16.790Z,1516677556.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:17.186Z,1516677557.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:17.587Z,1516677557.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:17.987Z,1516677557.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:18.373Z,1516677558.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:18.788Z,1516677558.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:19.188Z,1516677559.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:19.587Z,1516677559.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:19.987Z,1516677559.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:20.389Z,1516677560.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:20.765Z,1516677560.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:21.193Z,1516677561.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:21.597Z,1516677561.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:22.001Z,1516677562.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:22.399Z,1516677562.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:22.779Z,1516677562.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:23.173Z,1516677563.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:23.572Z,1516677563.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:23.979Z,1516677563.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:24.381Z,1516677564.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:24.776Z,1516677564.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:25.174Z,1516677565.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:25.584Z,1516677565.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:25.977Z,1516677565.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:26.386Z,1516677566.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:26.785Z,1516677566.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:27.186Z,1516677567.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:27.586Z,1516677567.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:27.979Z,1516677567.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:28.385Z,1516677568.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:28.784Z,1516677568.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:29.181Z,1516677569.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:29.581Z,1516677569.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:29.953Z,1516677569.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:29.991Z,1516677569.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:30.371Z,1516677570.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:30.385Z,1516677570.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:30.753Z,1516677570.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:30.779Z,1516677570.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:31.153Z,1516677571.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:31.189Z,1516677571.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:31.570Z,1516677571.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:31.591Z,1516677571.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:31.979Z,1516677571.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:31.994Z,1516677571.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:32.377Z,1516677572.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:32.391Z,1516677572.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:32.768Z,1516677572.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:32.795Z,1516677572.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:33.154Z,1516677573.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:33.193Z,1516677573.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:33.575Z,1516677573.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:33.588Z,1516677573.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:33.951Z,1516677573.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:33.974Z,1516677573.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:34.353Z,1516677574.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:34.390Z,1516677574.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:34.753Z,1516677574.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:34.785Z,1516677574.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:35.155Z,1516677575.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:35.170Z,1516677575.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:35.553Z,1516677575.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:35.573Z,1516677575.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:35.961Z,1516677575.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:35.976Z,1516677575.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:36.359Z,1516677576.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:36.382Z,1516677576.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:36.776Z,1516677576.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:36.809Z,1516677576.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:37.176Z,1516677577.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:37.210Z,1516677577.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:37.564Z,1516677577.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:37.578Z,1516677577.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:37.964Z,1516677577.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:37.978Z,1516677577.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:38.380Z,1516677578.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:38.777Z,1516677578.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:39.181Z,1516677579.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:39.575Z,1516677579.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:39.976Z,1516677579.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:40.389Z,1516677580.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:40.780Z,1516677580.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:41.174Z,1516677581.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:41.578Z,1516677581.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:41.989Z,1516677581.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:42.385Z,1516677582.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:42.785Z,1516677582.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:43.183Z,1516677583.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:43.578Z,1516677583.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:43.981Z,1516677583.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:44.376Z,1516677584.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:44.776Z,1516677584.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:45.189Z,1516677585.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:45.584Z,1516677585.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:45.981Z,1516677585.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:46.389Z,1516677586.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:46.768Z,1516677586.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:46.781Z,1516677586.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:47.179Z,1516677587.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:47.193Z,1516677587.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:47.579Z,1516677587.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:47.593Z,1516677587.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:47.978Z,1516677587.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:47.992Z,1516677587.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:48.371Z,1516677588.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:48.402Z,1516677588.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:48.769Z,1516677588.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:48.784Z,1516677588.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:49.153Z,1516677589.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:49.189Z,1516677589.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:49.563Z,1516677589.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:49.585Z,1516677589.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:49.959Z,1516677589.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:49.989Z,1516677589.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:50.365Z,1516677590.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:50.379Z,1516677590.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:50.759Z,1516677590.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:50.786Z,1516677590.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:51.169Z,1516677591.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:51.183Z,1516677591.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:51.554Z,1516677591.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:51.593Z,1516677591.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:51.955Z,1516677591.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:51.985Z,1516677591.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:52.380Z,1516677592.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:19:52.394Z,1516677592.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:52.792Z,1516677592.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:55.843Z,1516677595.843 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-01-23T03:19:55.887Z,1516677595.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:56.009Z,1516677596.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:56.377Z,1516677596.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:56.785Z,1516677596.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:57.161Z,1516677597.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:57.577Z,1516677597.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:57.955Z,1516677597.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:58.356Z,1516677598.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:58.758Z,1516677598.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:59.182Z,1516677599.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:59.564Z,1516677599.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:19:59.958Z,1516677599.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:00.355Z,1516677600.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:00.765Z,1516677600.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:01.165Z,1516677601.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:01.559Z,1516677601.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:01.964Z,1516677601.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:02.385Z,1516677602.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:02.787Z,1516677602.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:03.159Z,1516677603.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:03.555Z,1516677603.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:03.953Z,1516677603.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:04.352Z,1516677604.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:04.762Z,1516677604.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:05.164Z,1516677605.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:05.585Z,1516677605.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:05.953Z,1516677605.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:06.353Z,1516677606.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:06.758Z,1516677606.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:07.154Z,1516677607.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:07.552Z,1516677607.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:07.961Z,1516677607.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:08.365Z,1516677608.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:08.769Z,1516677608.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:09.160Z,1516677609.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:09.559Z,1516677609.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:09.964Z,1516677609.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:10.352Z,1516677610.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:10.766Z,1516677610.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:11.172Z,1516677611.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:11.568Z,1516677611.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:11.955Z,1516677611.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:12.364Z,1516677612.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:12.364Z,1516677612.364 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-01-23T03:20:12.364Z,1516677612.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:20:12.366Z,1516677612.366 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:12.366Z,1516677612.366 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-01-23T03:20:12.366Z,1516677612.366 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:20:12.381Z,1516677612.381 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:12.381Z,1516677612.381 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2 2018-01-23T03:20:12.381Z,1516677612.381 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:20:12.405Z,1516677612.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:20:12.405Z,1516677612.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:20:12.406Z,1516677612.406 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:20:12.782Z,1516677612.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:20:12.782Z,1516677612.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-01-23T03:20:12.787Z,1516677612.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:20:12.787Z,1516677612.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-01-23T03:20:12.787Z,1516677612.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:20:12.788Z,1516677612.788 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2 2018-01-23T03:20:13.152Z,1516677613.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:20:13.152Z,1516677613.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:20:13.153Z,1516677613.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:20:13.153Z,1516677613.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:20:13.154Z,1516677613.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:20:13.154Z,1516677613.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:20:13.155Z,1516677613.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:20:13.156Z,1516677613.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:20:13.156Z,1516677613.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:20:13.556Z,1516677613.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:20:13.557Z,1516677613.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:13.968Z,1516677613.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:20:13.969Z,1516677613.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:14.365Z,1516677614.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:20:14.366Z,1516677614.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:14.766Z,1516677614.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:20:14.767Z,1516677614.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:15.159Z,1516677615.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:20:15.160Z,1516677615.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:15.561Z,1516677615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:20:15.562Z,1516677615.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:15.964Z,1516677615.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:20:15.965Z,1516677615.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:16.366Z,1516677616.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:20:16.371Z,1516677616.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:16.761Z,1516677616.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:20:16.762Z,1516677616.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:17.166Z,1516677617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:20:17.167Z,1516677617.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:17.561Z,1516677617.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:20:17.562Z,1516677617.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:17.968Z,1516677617.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:20:17.969Z,1516677617.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:18.342Z,1516677618.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:20:18.367Z,1516677618.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:18.741Z,1516677618.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:20:18.742Z,1516677618.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:19.143Z,1516677619.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:20:19.144Z,1516677619.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:19.548Z,1516677619.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:20:19.549Z,1516677619.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:19.974Z,1516677619.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:20:19.975Z,1516677619.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:20.375Z,1516677620.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:20:20.376Z,1516677620.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:20.779Z,1516677620.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:20:20.780Z,1516677620.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:21.148Z,1516677621.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:20:21.149Z,1516677621.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:21.556Z,1516677621.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:20:21.557Z,1516677621.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:21.952Z,1516677621.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:20:21.953Z,1516677621.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:22.368Z,1516677622.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:20:22.369Z,1516677622.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:22.765Z,1516677622.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:20:22.766Z,1516677622.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:23.165Z,1516677623.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:20:23.166Z,1516677623.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:23.561Z,1516677623.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:20:23.562Z,1516677623.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:23.962Z,1516677623.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:20:23.963Z,1516677623.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:24.359Z,1516677624.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:20:24.360Z,1516677624.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:24.757Z,1516677624.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:20:24.758Z,1516677624.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:25.160Z,1516677625.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:20:25.161Z,1516677625.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:25.561Z,1516677625.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:20:25.562Z,1516677625.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:25.964Z,1516677625.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:20:25.965Z,1516677625.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:26.371Z,1516677626.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:20:26.372Z,1516677626.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:26.764Z,1516677626.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:20:26.765Z,1516677626.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:27.159Z,1516677627.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:20:27.160Z,1516677627.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:27.555Z,1516677627.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:20:27.556Z,1516677627.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:27.930Z,1516677627.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:27.944Z,1516677627.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:20:27.945Z,1516677627.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:28.329Z,1516677628.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:28.343Z,1516677628.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:20:28.344Z,1516677628.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:28.752Z,1516677628.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:28.780Z,1516677628.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:20:28.781Z,1516677628.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:29.148Z,1516677629.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:29.176Z,1516677629.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:20:29.177Z,1516677629.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:29.544Z,1516677629.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:29.574Z,1516677629.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:20:29.579Z,1516677629.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:29.941Z,1516677629.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:29.976Z,1516677629.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:20:29.977Z,1516677629.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:30.334Z,1516677630.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:30.360Z,1516677630.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:20:30.361Z,1516677630.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:30.731Z,1516677630.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:30.753Z,1516677630.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:20:30.754Z,1516677630.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:31.134Z,1516677631.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:31.160Z,1516677631.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:20:31.161Z,1516677631.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:31.536Z,1516677631.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:31.555Z,1516677631.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:20:31.556Z,1516677631.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:31.943Z,1516677631.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:31.957Z,1516677631.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:20:31.958Z,1516677631.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:32.344Z,1516677632.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:32.358Z,1516677632.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:32.743Z,1516677632.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:32.757Z,1516677632.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:33.137Z,1516677633.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:33.151Z,1516677633.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:33.541Z,1516677633.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:33.561Z,1516677633.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:33.934Z,1516677633.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:33.964Z,1516677633.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:34.332Z,1516677634.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:34.355Z,1516677634.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:34.748Z,1516677634.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:34.762Z,1516677634.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:35.152Z,1516677635.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:35.167Z,1516677635.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:35.548Z,1516677635.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:35.569Z,1516677635.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:35.941Z,1516677635.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:35.961Z,1516677635.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:36.338Z,1516677636.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:36.377Z,1516677636.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:36.735Z,1516677636.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:36.753Z,1516677636.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:37.132Z,1516677637.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:37.164Z,1516677637.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:37.532Z,1516677637.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:37.563Z,1516677637.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:37.948Z,1516677637.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:37.963Z,1516677637.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:38.348Z,1516677638.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:38.375Z,1516677638.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:38.767Z,1516677638.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:39.159Z,1516677639.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:39.559Z,1516677639.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:39.965Z,1516677639.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:40.363Z,1516677640.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:40.771Z,1516677640.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:41.173Z,1516677641.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:41.571Z,1516677641.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:41.963Z,1516677641.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:42.369Z,1516677642.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:42.767Z,1516677642.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:43.144Z,1516677643.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:43.573Z,1516677643.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:43.970Z,1516677643.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:44.369Z,1516677644.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:44.785Z,1516677644.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:45.173Z,1516677645.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:45.554Z,1516677645.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:45.951Z,1516677645.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:46.353Z,1516677646.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:46.758Z,1516677646.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:47.162Z,1516677647.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:47.555Z,1516677647.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:47.957Z,1516677647.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:48.354Z,1516677648.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:48.755Z,1516677648.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:49.157Z,1516677649.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:49.543Z,1516677649.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:49.611Z,1516677649.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:49.947Z,1516677649.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:49.962Z,1516677649.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:50.346Z,1516677650.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:50.362Z,1516677650.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:50.747Z,1516677650.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:50.762Z,1516677650.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:51.137Z,1516677651.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:51.151Z,1516677651.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:51.537Z,1516677651.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:51.551Z,1516677651.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:51.938Z,1516677651.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:51.962Z,1516677651.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:52.335Z,1516677652.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:52.357Z,1516677652.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:52.745Z,1516677652.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:52.763Z,1516677652.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:53.147Z,1516677653.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:53.168Z,1516677653.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:56.408Z,1516677656.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:56.447Z,1516677656.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:56.548Z,1516677656.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:56.562Z,1516677656.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:56.894Z,1516677656.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:56.917Z,1516677656.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:57.302Z,1516677657.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:57.315Z,1516677657.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:57.700Z,1516677657.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:57.715Z,1516677657.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:58.104Z,1516677658.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:58.118Z,1516677658.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:58.512Z,1516677658.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:58.526Z,1516677658.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:58.899Z,1516677658.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:58.913Z,1516677658.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:59.298Z,1516677659.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:59.312Z,1516677659.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:20:59.699Z,1516677659.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:20:59.713Z,1516677659.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:00.103Z,1516677660.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:00.118Z,1516677660.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:00.493Z,1516677660.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:00.512Z,1516677660.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:00.908Z,1516677660.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:00.922Z,1516677660.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:01.308Z,1516677661.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:01.322Z,1516677661.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:01.713Z,1516677661.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:01.727Z,1516677661.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:02.099Z,1516677662.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:02.114Z,1516677662.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:02.493Z,1516677662.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:02.516Z,1516677662.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:02.892Z,1516677662.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:02.929Z,1516677662.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:03.306Z,1516677663.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:03.321Z,1516677663.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:03.709Z,1516677663.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:03.724Z,1516677663.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:04.112Z,1516677664.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:04.127Z,1516677664.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:04.508Z,1516677664.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:04.523Z,1516677664.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:04.896Z,1516677664.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:04.919Z,1516677664.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:05.309Z,1516677665.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:05.325Z,1516677665.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:05.689Z,1516677665.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:05.716Z,1516677665.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:06.090Z,1516677666.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:06.121Z,1516677666.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:06.497Z,1516677666.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:06.519Z,1516677666.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:06.913Z,1516677666.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:06.927Z,1516677666.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:07.309Z,1516677667.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:07.335Z,1516677667.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:07.705Z,1516677667.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:07.725Z,1516677667.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:08.092Z,1516677668.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:08.118Z,1516677668.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:08.493Z,1516677668.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:08.529Z,1516677668.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:08.890Z,1516677668.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:08.920Z,1516677668.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:09.289Z,1516677669.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:09.303Z,1516677669.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:09.704Z,1516677669.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:09.729Z,1516677669.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:10.123Z,1516677670.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:10.137Z,1516677670.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:10.504Z,1516677670.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:10.532Z,1516677670.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:10.889Z,1516677670.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:10.909Z,1516677670.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:11.299Z,1516677671.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:11.313Z,1516677671.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:11.701Z,1516677671.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:11.715Z,1516677671.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:12.093Z,1516677672.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:12.113Z,1516677672.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:12.494Z,1516677672.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:12.513Z,1516677672.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:12.908Z,1516677672.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:12.922Z,1516677672.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:13.304Z,1516677673.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:13.318Z,1516677673.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:13.716Z,1516677673.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:13.746Z,1516677673.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:14.098Z,1516677674.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:14.112Z,1516677674.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:14.500Z,1516677674.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:14.520Z,1516677674.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:14.900Z,1516677674.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:14.914Z,1516677674.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:15.302Z,1516677675.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:15.316Z,1516677675.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:15.702Z,1516677675.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:15.721Z,1516677675.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:16.108Z,1516677676.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:16.123Z,1516677676.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:16.505Z,1516677676.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:16.524Z,1516677676.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:16.902Z,1516677676.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:16.917Z,1516677676.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:17.303Z,1516677677.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:17.325Z,1516677677.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:17.712Z,1516677677.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:17.732Z,1516677677.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:18.108Z,1516677678.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:18.122Z,1516677678.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:18.507Z,1516677678.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:18.521Z,1516677678.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:18.906Z,1516677678.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:18.920Z,1516677678.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:19.295Z,1516677679.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:19.318Z,1516677679.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:19.707Z,1516677679.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:19.721Z,1516677679.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:20.102Z,1516677680.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:20.116Z,1516677680.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:20.496Z,1516677680.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:20.519Z,1516677680.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:20.910Z,1516677680.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:20.937Z,1516677680.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:21.313Z,1516677681.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:21.332Z,1516677681.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:21.715Z,1516677681.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:21.729Z,1516677681.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:22.105Z,1516677682.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:22.125Z,1516677682.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:22.489Z,1516677682.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:22.528Z,1516677682.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:22.900Z,1516677682.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:22.918Z,1516677682.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:23.291Z,1516677683.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:23.325Z,1516677683.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:23.716Z,1516677683.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:23.736Z,1516677683.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:24.111Z,1516677684.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:24.126Z,1516677684.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:24.510Z,1516677684.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:24.524Z,1516677684.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:24.893Z,1516677684.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:24.931Z,1516677684.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:25.293Z,1516677685.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:25.324Z,1516677685.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:25.702Z,1516677685.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:25.753Z,1516677685.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:26.120Z,1516677686.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:26.134Z,1516677686.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:26.518Z,1516677686.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:26.540Z,1516677686.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:26.897Z,1516677686.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:26.931Z,1516677686.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:27.300Z,1516677687.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:27.333Z,1516677687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:27.696Z,1516677687.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:27.720Z,1516677687.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:28.096Z,1516677688.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:28.133Z,1516677688.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:28.498Z,1516677688.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:28.513Z,1516677688.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:28.911Z,1516677688.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:28.937Z,1516677688.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:29.313Z,1516677689.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:29.345Z,1516677689.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:29.702Z,1516677689.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:29.717Z,1516677689.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:30.097Z,1516677690.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:30.115Z,1516677690.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:30.497Z,1516677690.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:30.529Z,1516677690.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:30.905Z,1516677690.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:30.912Z,1516677690.912 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T03:21:30.948Z,1516677690.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:31.300Z,1516677691.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:31.314Z,1516677691.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:31.705Z,1516677691.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:31.725Z,1516677691.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:32.108Z,1516677692.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:32.125Z,1516677692.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:32.508Z,1516677692.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:32.529Z,1516677692.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:32.904Z,1516677692.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:32.918Z,1516677692.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:33.295Z,1516677693.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:33.327Z,1516677693.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:33.692Z,1516677693.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:33.733Z,1516677693.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:34.096Z,1516677694.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:34.119Z,1516677694.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:34.498Z,1516677694.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:34.521Z,1516677694.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:34.910Z,1516677694.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:34.924Z,1516677694.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:35.313Z,1516677695.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:35.330Z,1516677695.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:35.711Z,1516677695.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:35.726Z,1516677695.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:36.093Z,1516677696.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:36.127Z,1516677696.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:36.505Z,1516677696.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:36.519Z,1516677696.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:36.908Z,1516677696.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:36.946Z,1516677696.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:37.299Z,1516677697.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:37.333Z,1516677697.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:37.715Z,1516677697.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:37.721Z,1516677697.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x53695 got:0x17282 2018-01-23T03:21:37.760Z,1516677697.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:38.114Z,1516677698.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:38.129Z,1516677698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:38.507Z,1516677698.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:38.549Z,1516677698.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:38.897Z,1516677698.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:38.913Z,1516677698.913 [PNI_TCM](ERROR): CRC does not match. Expected:0x63734 got:0x6841 2018-01-23T03:21:38.948Z,1516677698.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:39.298Z,1516677699.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:39.314Z,1516677699.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x6711 got:0x16956 2018-01-23T03:21:39.348Z,1516677699.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:39.714Z,1516677699.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:39.728Z,1516677699.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:40.111Z,1516677700.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:40.149Z,1516677700.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:40.510Z,1516677700.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:40.528Z,1516677700.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:40.892Z,1516677700.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:40.946Z,1516677700.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:41.294Z,1516677701.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:41.322Z,1516677701.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:41.689Z,1516677701.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:41.734Z,1516677701.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:42.094Z,1516677702.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:42.125Z,1516677702.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:42.489Z,1516677702.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:42.520Z,1516677702.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:42.909Z,1516677702.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:42.932Z,1516677702.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:43.308Z,1516677703.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:43.344Z,1516677703.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:43.705Z,1516677703.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:43.730Z,1516677703.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:44.089Z,1516677704.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:44.125Z,1516677704.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:44.489Z,1516677704.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:44.526Z,1516677704.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:44.889Z,1516677704.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:44.937Z,1516677704.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:45.294Z,1516677705.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:45.323Z,1516677705.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:45.689Z,1516677705.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:45.718Z,1516677705.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:46.106Z,1516677706.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:46.129Z,1516677706.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:46.510Z,1516677706.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:46.536Z,1516677706.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:46.906Z,1516677706.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:46.929Z,1516677706.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:47.290Z,1516677707.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:47.318Z,1516677707.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:47.688Z,1516677707.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:47.728Z,1516677707.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:48.094Z,1516677708.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:48.119Z,1516677708.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:48.504Z,1516677708.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:48.523Z,1516677708.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:48.907Z,1516677708.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:48.930Z,1516677708.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:49.314Z,1516677709.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:49.328Z,1516677709.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:49.708Z,1516677709.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:49.744Z,1516677709.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:50.093Z,1516677710.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:50.119Z,1516677710.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:50.493Z,1516677710.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:50.521Z,1516677710.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:50.889Z,1516677710.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:50.918Z,1516677710.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:51.290Z,1516677711.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:51.328Z,1516677711.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:51.689Z,1516677711.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:51.714Z,1516677711.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:52.104Z,1516677712.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:52.129Z,1516677712.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:52.514Z,1516677712.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:52.529Z,1516677712.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:52.908Z,1516677712.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:52.942Z,1516677712.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:53.294Z,1516677713.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:53.319Z,1516677713.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:56.386Z,1516677716.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:56.414Z,1516677716.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:56.517Z,1516677716.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:56.564Z,1516677716.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:56.872Z,1516677716.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:56.886Z,1516677716.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:57.277Z,1516677717.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:57.291Z,1516677717.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:57.671Z,1516677717.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:57.686Z,1516677717.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:58.061Z,1516677718.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:58.082Z,1516677718.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:58.466Z,1516677718.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:58.480Z,1516677718.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:58.864Z,1516677718.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:58.879Z,1516677718.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:59.260Z,1516677719.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:59.290Z,1516677719.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:21:59.667Z,1516677719.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:21:59.681Z,1516677719.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:00.071Z,1516677720.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:00.085Z,1516677720.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:00.472Z,1516677720.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:00.486Z,1516677720.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:00.871Z,1516677720.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:00.892Z,1516677720.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:01.269Z,1516677721.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:01.283Z,1516677721.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:01.664Z,1516677721.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:01.679Z,1516677721.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:02.066Z,1516677722.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:02.080Z,1516677722.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:02.464Z,1516677722.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:02.479Z,1516677722.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:02.870Z,1516677722.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:02.889Z,1516677722.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:03.286Z,1516677723.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:03.686Z,1516677723.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:04.080Z,1516677724.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:04.479Z,1516677724.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:04.883Z,1516677724.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:05.280Z,1516677725.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:05.680Z,1516677725.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:06.086Z,1516677726.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:06.486Z,1516677726.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:06.885Z,1516677726.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:07.280Z,1516677727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:07.689Z,1516677727.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:08.085Z,1516677728.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:08.480Z,1516677728.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:08.893Z,1516677728.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:09.290Z,1516677729.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:09.693Z,1516677729.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:10.083Z,1516677730.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:10.485Z,1516677730.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:10.884Z,1516677730.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:11.287Z,1516677731.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:11.681Z,1516677731.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:12.090Z,1516677732.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:12.493Z,1516677732.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:12.894Z,1516677732.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:13.285Z,1516677733.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:13.691Z,1516677733.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:14.094Z,1516677734.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:14.483Z,1516677734.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:14.897Z,1516677734.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:15.295Z,1516677735.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:15.701Z,1516677735.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:16.086Z,1516677736.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:16.484Z,1516677736.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:16.889Z,1516677736.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:17.289Z,1516677737.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:17.692Z,1516677737.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:18.104Z,1516677738.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:18.495Z,1516677738.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:18.891Z,1516677738.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:19.288Z,1516677739.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:19.687Z,1516677739.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:20.092Z,1516677740.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:20.481Z,1516677740.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:20.897Z,1516677740.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:21.300Z,1516677741.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:21.691Z,1516677741.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:22.085Z,1516677742.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:22.488Z,1516677742.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:22.887Z,1516677742.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:23.287Z,1516677743.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:23.692Z,1516677743.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:24.091Z,1516677744.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:24.498Z,1516677744.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:24.894Z,1516677744.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:25.289Z,1516677745.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:25.689Z,1516677745.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:26.093Z,1516677746.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:26.491Z,1516677746.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:26.899Z,1516677746.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:27.305Z,1516677747.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:27.700Z,1516677747.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:28.092Z,1516677748.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:28.493Z,1516677748.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:28.869Z,1516677748.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:29.272Z,1516677749.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:29.675Z,1516677749.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:30.098Z,1516677750.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:30.509Z,1516677750.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:30.907Z,1516677750.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:31.301Z,1516677751.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:31.685Z,1516677751.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:32.079Z,1516677752.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:32.485Z,1516677752.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:32.910Z,1516677752.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:33.289Z,1516677753.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:33.682Z,1516677753.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:34.081Z,1516677754.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:34.492Z,1516677754.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:34.879Z,1516677754.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:35.281Z,1516677755.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:35.679Z,1516677755.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:36.083Z,1516677756.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:36.486Z,1516677756.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:36.882Z,1516677756.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:37.276Z,1516677757.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:37.678Z,1516677757.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:38.066Z,1516677758.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:38.080Z,1516677758.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:38.465Z,1516677758.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:38.479Z,1516677758.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:38.868Z,1516677758.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:38.883Z,1516677758.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:39.272Z,1516677759.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:39.286Z,1516677759.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:39.668Z,1516677759.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:39.689Z,1516677759.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:40.065Z,1516677760.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:40.085Z,1516677760.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:40.470Z,1516677760.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:40.484Z,1516677760.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:40.860Z,1516677760.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:40.880Z,1516677760.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:41.262Z,1516677761.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:41.288Z,1516677761.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:41.670Z,1516677761.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:41.684Z,1516677761.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:42.076Z,1516677762.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:42.090Z,1516677762.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:42.479Z,1516677762.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:42.493Z,1516677762.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:42.876Z,1516677762.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:42.890Z,1516677762.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:43.260Z,1516677763.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:43.282Z,1516677763.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:43.660Z,1516677763.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:43.691Z,1516677763.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:44.067Z,1516677764.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:44.081Z,1516677764.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:44.460Z,1516677764.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:44.482Z,1516677764.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:44.875Z,1516677764.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:44.890Z,1516677764.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:45.279Z,1516677765.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:45.293Z,1516677765.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:45.676Z,1516677765.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:45.697Z,1516677765.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:46.067Z,1516677766.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:46.081Z,1516677766.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:46.467Z,1516677766.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:46.488Z,1516677766.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:46.863Z,1516677766.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:46.881Z,1516677766.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:47.260Z,1516677767.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:47.282Z,1516677767.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:47.658Z,1516677767.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:47.684Z,1516677767.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:48.076Z,1516677768.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:48.091Z,1516677768.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:48.479Z,1516677768.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:22:48.493Z,1516677768.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:48.891Z,1516677768.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:49.293Z,1516677769.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:49.687Z,1516677769.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:50.090Z,1516677770.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:50.492Z,1516677770.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:50.893Z,1516677770.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:51.300Z,1516677771.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:51.699Z,1516677771.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:52.088Z,1516677772.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:52.494Z,1516677772.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:52.887Z,1516677772.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:53.293Z,1516677773.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:53.701Z,1516677773.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:56.789Z,1516677776.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:56.937Z,1516677776.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:57.261Z,1516677777.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:57.660Z,1516677777.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:58.061Z,1516677778.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:58.454Z,1516677778.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:58.872Z,1516677778.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:59.265Z,1516677779.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:22:59.665Z,1516677779.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:00.065Z,1516677780.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:00.459Z,1516677780.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:00.857Z,1516677780.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:01.261Z,1516677781.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:01.654Z,1516677781.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:02.065Z,1516677782.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:02.476Z,1516677782.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:02.865Z,1516677782.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:03.257Z,1516677783.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:03.666Z,1516677783.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:04.060Z,1516677784.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:04.457Z,1516677784.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:04.855Z,1516677784.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:04.870Z,1516677784.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:05.252Z,1516677785.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:05.266Z,1516677785.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:05.652Z,1516677785.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:05.666Z,1516677785.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:05.669Z,1516677785.669 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T03:18:05.6Z 2018-01-23T03:23:05.669Z,1516677785.669 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T03:23:05.670Z,1516677785.670 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T03:23:06.040Z,1516677786.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:06.065Z,1516677786.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:06.068Z,1516677786.068 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications 2018-01-23T03:23:06.551Z,1516677786.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:06.565Z,1516677786.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:06.833Z,1516677786.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:06.860Z,1516677786.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:09.937Z,1516677789.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:09.961Z,1516677789.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:10.042Z,1516677790.042 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0004.lzma 2018-01-23T03:23:10.063Z,1516677790.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:10.112Z,1516677790.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:10.421Z,1516677790.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:10.435Z,1516677790.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:10.785Z,1516677790.785 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0004.lzma.bak 2018-01-23T03:23:10.785Z,1516677790.785 [DataOverHttps](INFO): SBD MOMSN=7754914 2018-01-23T03:23:10.840Z,1516677790.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:10.865Z,1516677790.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:11.451Z,1516677791.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:11.470Z,1516677791.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:11.613Z,1516677791.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:11.628Z,1516677791.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:14.714Z,1516677794.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:14.728Z,1516677794.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:14.728Z,1516677794.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-01-23T03:23:14.728Z,1516677794.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:23:14.730Z,1516677794.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:14.730Z,1516677794.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-01-23T03:23:14.730Z,1516677794.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:23:14.732Z,1516677794.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:14.732Z,1516677794.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3 2018-01-23T03:23:14.732Z,1516677794.732 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:23:14.774Z,1516677794.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:23:14.775Z,1516677794.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:23:14.775Z,1516677794.775 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:23:14.853Z,1516677794.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:14.904Z,1516677794.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:23:14.904Z,1516677794.904 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-01-23T03:23:14.904Z,1516677794.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:23:14.904Z,1516677794.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-01-23T03:23:14.905Z,1516677794.905 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:23:14.905Z,1516677794.905 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3 2018-01-23T03:23:15.224Z,1516677795.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:15.246Z,1516677795.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:23:15.246Z,1516677795.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:23:15.251Z,1516677795.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:23:15.251Z,1516677795.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:23:15.252Z,1516677795.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:23:15.252Z,1516677795.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:23:15.252Z,1516677795.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:23:15.253Z,1516677795.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:23:15.253Z,1516677795.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:23:15.637Z,1516677795.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:15.663Z,1516677795.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T03:23:15.664Z,1516677795.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:16.024Z,1516677796.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:16.045Z,1516677796.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T03:23:16.046Z,1516677796.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:16.410Z,1516677796.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:16.441Z,1516677796.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T03:23:16.442Z,1516677796.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:19.508Z,1516677799.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:19.542Z,1516677799.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:23:19.543Z,1516677799.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:19.608Z,1516677799.608 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20180123T031358/Express0005.lzma 2018-01-23T03:23:19.635Z,1516677799.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:19.682Z,1516677799.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s. 2018-01-23T03:23:19.683Z,1516677799.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:20.012Z,1516677800.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:20.033Z,1516677800.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T03:23:20.034Z,1516677800.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:20.365Z,1516677800.365 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0005.lzma.bak 2018-01-23T03:23:20.365Z,1516677800.365 [DataOverHttps](INFO): SBD MOMSN=7754916 2018-01-23T03:23:20.411Z,1516677800.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:20.435Z,1516677800.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T03:23:20.436Z,1516677800.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:21.033Z,1516677801.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:21.052Z,1516677801.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T03:23:21.053Z,1516677801.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:21.056Z,1516677801.056 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T03:23:21.056Z,1516677801.056 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T03:23:21.056Z,1516677801.056 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T03:23:21.189Z,1516677801.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:21.211Z,1516677801.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T03:23:21.212Z,1516677801.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:24.363Z,1516677804.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:24.400Z,1516677804.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T03:23:24.401Z,1516677804.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:24.480Z,1516677804.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:24.516Z,1516677804.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T03:23:24.517Z,1516677804.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:24.860Z,1516677804.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:24.874Z,1516677804.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T03:23:24.887Z,1516677804.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:25.268Z,1516677805.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:25.298Z,1516677805.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s. 2018-01-23T03:23:25.299Z,1516677805.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:25.656Z,1516677805.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:25.670Z,1516677805.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T03:23:25.671Z,1516677805.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:26.050Z,1516677806.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:26.068Z,1516677806.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T03:23:26.069Z,1516677806.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:26.454Z,1516677806.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:26.468Z,1516677806.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T03:23:26.468Z,1516677806.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:26.855Z,1516677806.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:26.869Z,1516677806.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T03:23:26.870Z,1516677806.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:27.268Z,1516677807.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:27.294Z,1516677807.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s. 2018-01-23T03:23:27.300Z,1516677807.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:27.668Z,1516677807.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:27.701Z,1516677807.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s. 2018-01-23T03:23:27.702Z,1516677807.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:28.060Z,1516677808.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:28.074Z,1516677808.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T03:23:28.076Z,1516677808.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:28.459Z,1516677808.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:28.473Z,1516677808.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T03:23:28.474Z,1516677808.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:28.855Z,1516677808.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:28.869Z,1516677808.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T03:23:28.870Z,1516677808.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:29.251Z,1516677809.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:29.273Z,1516677809.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T03:23:29.274Z,1516677809.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:29.652Z,1516677809.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:29.685Z,1516677809.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s. 2018-01-23T03:23:29.685Z,1516677809.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:30.064Z,1516677810.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:30.078Z,1516677810.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s. 2018-01-23T03:23:30.079Z,1516677810.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:30.469Z,1516677810.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:30.488Z,1516677810.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s. 2018-01-23T03:23:30.489Z,1516677810.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:30.868Z,1516677810.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:30.888Z,1516677810.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s. 2018-01-23T03:23:30.889Z,1516677810.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:31.246Z,1516677811.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:31.274Z,1516677811.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T03:23:31.275Z,1516677811.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:31.646Z,1516677811.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:31.673Z,1516677811.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T03:23:31.674Z,1516677811.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:32.046Z,1516677812.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:32.078Z,1516677812.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s. 2018-01-23T03:23:32.079Z,1516677812.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:32.458Z,1516677812.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:32.472Z,1516677812.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T03:23:32.473Z,1516677812.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:32.844Z,1516677812.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:32.857Z,1516677812.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T03:23:32.858Z,1516677812.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:33.265Z,1516677813.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:33.285Z,1516677813.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s. 2018-01-23T03:23:33.286Z,1516677813.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:33.660Z,1516677813.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:33.680Z,1516677813.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s. 2018-01-23T03:23:33.681Z,1516677813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:34.057Z,1516677814.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:34.135Z,1516677814.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T03:23:34.136Z,1516677814.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:34.447Z,1516677814.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:34.461Z,1516677814.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T03:23:34.462Z,1516677814.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:34.847Z,1516677814.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:34.860Z,1516677814.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:35.250Z,1516677815.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:35.265Z,1516677815.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:35.654Z,1516677815.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:35.668Z,1516677815.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:36.057Z,1516677816.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:36.081Z,1516677816.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:36.461Z,1516677816.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:36.482Z,1516677816.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:36.860Z,1516677816.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:36.879Z,1516677816.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:37.254Z,1516677817.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:37.268Z,1516677817.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:37.649Z,1516677817.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:37.671Z,1516677817.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:38.053Z,1516677818.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:38.067Z,1516677818.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:38.454Z,1516677818.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:38.468Z,1516677818.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:38.848Z,1516677818.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:38.869Z,1516677818.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:39.263Z,1516677819.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:39.285Z,1516677819.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:39.664Z,1516677819.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:39.678Z,1516677819.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:40.061Z,1516677820.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:40.087Z,1516677820.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:40.457Z,1516677820.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:40.471Z,1516677820.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:40.854Z,1516677820.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:40.868Z,1516677820.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:41.252Z,1516677821.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:41.272Z,1516677821.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:41.645Z,1516677821.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:41.677Z,1516677821.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:42.079Z,1516677822.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:42.489Z,1516677822.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:42.879Z,1516677822.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:43.271Z,1516677823.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:43.673Z,1516677823.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:44.073Z,1516677824.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:44.472Z,1516677824.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:44.897Z,1516677824.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:45.289Z,1516677825.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:45.668Z,1516677825.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:45.682Z,1516677825.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:46.062Z,1516677826.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:46.084Z,1516677826.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:46.449Z,1516677826.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:46.474Z,1516677826.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:46.845Z,1516677826.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:46.878Z,1516677826.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:47.250Z,1516677827.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:47.276Z,1516677827.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:47.645Z,1516677827.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:47.681Z,1516677827.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:48.060Z,1516677828.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:48.091Z,1516677828.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:48.466Z,1516677828.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:48.486Z,1516677828.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:48.864Z,1516677828.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:23:48.878Z,1516677828.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:49.285Z,1516677829.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:49.665Z,1516677829.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:50.079Z,1516677830.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:50.481Z,1516677830.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:50.857Z,1516677830.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:51.281Z,1516677831.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:51.693Z,1516677831.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:52.092Z,1516677832.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:52.481Z,1516677832.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:52.860Z,1516677832.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:53.265Z,1516677833.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:53.693Z,1516677833.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:54.096Z,1516677834.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:54.492Z,1516677834.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:54.890Z,1516677834.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:55.269Z,1516677835.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:55.673Z,1516677835.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:56.072Z,1516677836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:56.469Z,1516677836.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:56.866Z,1516677836.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:57.270Z,1516677837.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:57.674Z,1516677837.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:58.070Z,1516677838.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:58.468Z,1516677838.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:58.873Z,1516677838.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:59.269Z,1516677839.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:23:59.681Z,1516677839.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:00.089Z,1516677840.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:00.489Z,1516677840.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:00.881Z,1516677840.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:01.281Z,1516677841.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:01.675Z,1516677841.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:02.077Z,1516677842.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:02.485Z,1516677842.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:02.879Z,1516677842.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:03.288Z,1516677843.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:03.687Z,1516677843.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:04.087Z,1516677844.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:04.479Z,1516677844.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:04.882Z,1516677844.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:05.272Z,1516677845.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:05.685Z,1516677845.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:06.087Z,1516677846.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:06.497Z,1516677846.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:06.897Z,1516677846.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:07.293Z,1516677847.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:07.665Z,1516677847.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:08.093Z,1516677848.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:08.467Z,1516677848.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:08.877Z,1516677848.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:09.271Z,1516677849.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:09.682Z,1516677849.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:10.086Z,1516677850.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:10.469Z,1516677850.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:10.869Z,1516677850.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:10.883Z,1516677850.883 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T03:24:11.273Z,1516677851.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:11.673Z,1516677851.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:12.085Z,1516677852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:12.482Z,1516677852.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:12.879Z,1516677852.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:13.269Z,1516677853.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:13.684Z,1516677853.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:14.069Z,1516677854.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:14.472Z,1516677854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:14.881Z,1516677854.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:15.286Z,1516677855.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:15.689Z,1516677855.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:16.078Z,1516677856.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:16.469Z,1516677856.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:16.877Z,1516677856.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:17.272Z,1516677857.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:17.668Z,1516677857.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:18.078Z,1516677858.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:18.485Z,1516677858.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:18.877Z,1516677858.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:19.276Z,1516677859.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:19.675Z,1516677859.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:20.069Z,1516677860.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:20.472Z,1516677860.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:20.871Z,1516677860.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:21.277Z,1516677861.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:21.689Z,1516677861.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:24.771Z,1516677864.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:24.917Z,1516677864.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:25.236Z,1516677865.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:25.643Z,1516677865.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:26.035Z,1516677866.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:26.444Z,1516677866.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:26.849Z,1516677866.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:27.246Z,1516677867.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:27.649Z,1516677867.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:28.046Z,1516677868.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:28.443Z,1516677868.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:28.837Z,1516677868.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:29.253Z,1516677869.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:29.648Z,1516677869.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:30.059Z,1516677870.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:30.471Z,1516677870.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:30.857Z,1516677870.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:31.248Z,1516677871.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:31.661Z,1516677871.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:32.037Z,1516677872.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:32.428Z,1516677872.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:32.828Z,1516677872.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:33.254Z,1516677873.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:33.668Z,1516677873.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:34.061Z,1516677874.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:34.465Z,1516677874.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:34.841Z,1516677874.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:35.240Z,1516677875.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:35.641Z,1516677875.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:36.045Z,1516677876.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:36.446Z,1516677876.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:36.854Z,1516677876.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:37.243Z,1516677877.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:37.636Z,1516677877.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:38.044Z,1516677878.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:38.444Z,1516677878.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:38.844Z,1516677878.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:39.245Z,1516677879.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:39.653Z,1516677879.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:40.050Z,1516677880.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:40.443Z,1516677880.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:40.849Z,1516677880.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:41.249Z,1516677881.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:41.643Z,1516677881.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:42.054Z,1516677882.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:42.457Z,1516677882.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:42.856Z,1516677882.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:43.243Z,1516677883.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:43.645Z,1516677883.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:44.044Z,1516677884.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:44.445Z,1516677884.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:44.844Z,1516677884.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:45.261Z,1516677885.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:45.654Z,1516677885.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:46.050Z,1516677886.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:46.443Z,1516677886.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:46.849Z,1516677886.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:47.242Z,1516677887.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:47.651Z,1516677887.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:48.052Z,1516677888.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:48.454Z,1516677888.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:48.857Z,1516677888.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:49.243Z,1516677889.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:49.641Z,1516677889.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:50.050Z,1516677890.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:50.453Z,1516677890.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:50.850Z,1516677890.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:51.249Z,1516677891.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:51.647Z,1516677891.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:52.044Z,1516677892.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:52.444Z,1516677892.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:52.841Z,1516677892.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:53.201Z,1516677893.201 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T03:24:53.201Z,1516677893.201 [NAL9602] Data Fault, FailCount= 1 2018-01-23T03:24:53.201Z,1516677893.201 [NAL9602](ERROR): Data Fault 2018-01-23T03:24:53.256Z,1516677893.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:53.269Z,1516677893.269 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T03:24:53.604Z,1516677893.604 [NAL9602](INFO): Powering down 2018-01-23T03:24:53.652Z,1516677893.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:54.040Z,1516677894.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:54.444Z,1516677894.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:54.457Z,1516677894.457 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T03:24:54.457Z,1516677894.457 [NAL9602] No Fault, FailCount= 1 2018-01-23T03:24:54.842Z,1516677894.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:55.242Z,1516677895.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:55.648Z,1516677895.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:56.040Z,1516677896.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:56.446Z,1516677896.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:56.838Z,1516677896.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:57.253Z,1516677897.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:57.653Z,1516677897.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:58.039Z,1516677898.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:58.429Z,1516677898.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:58.852Z,1516677898.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:59.228Z,1516677899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:24:59.633Z,1516677899.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:00.035Z,1516677900.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:00.456Z,1516677900.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:00.838Z,1516677900.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:01.236Z,1516677901.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:01.629Z,1516677901.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:02.057Z,1516677902.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:02.442Z,1516677902.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:02.832Z,1516677902.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:03.233Z,1516677903.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:03.660Z,1516677903.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:04.029Z,1516677904.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:04.436Z,1516677904.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:04.835Z,1516677904.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:05.256Z,1516677905.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:05.641Z,1516677905.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:06.045Z,1516677906.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:06.438Z,1516677906.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:06.866Z,1516677906.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:07.240Z,1516677907.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:07.621Z,1516677907.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:07.645Z,1516677907.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:08.024Z,1516677908.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:08.038Z,1516677908.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:08.419Z,1516677908.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:08.448Z,1516677908.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:08.818Z,1516677908.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:08.832Z,1516677908.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:09.220Z,1516677909.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:09.252Z,1516677909.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:09.622Z,1516677909.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:09.653Z,1516677909.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:10.018Z,1516677910.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:10.046Z,1516677910.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:10.421Z,1516677910.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:10.445Z,1516677910.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:10.821Z,1516677910.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:10.840Z,1516677910.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:11.219Z,1516677911.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:11.236Z,1516677911.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:11.616Z,1516677911.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:11.645Z,1516677911.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:12.041Z,1516677912.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:12.089Z,1516677912.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:12.432Z,1516677912.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:12.456Z,1516677912.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:12.817Z,1516677912.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:12.849Z,1516677912.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:13.219Z,1516677913.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:13.261Z,1516677913.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:13.622Z,1516677913.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:13.660Z,1516677913.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:14.027Z,1516677914.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:14.075Z,1516677914.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:14.418Z,1516677914.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:14.459Z,1516677914.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:14.815Z,1516677914.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:14.883Z,1516677914.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:15.227Z,1516677915.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:15.260Z,1516677915.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:15.619Z,1516677915.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:15.673Z,1516677915.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:16.013Z,1516677916.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:16.055Z,1516677916.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:16.426Z,1516677916.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:16.452Z,1516677916.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:16.823Z,1516677916.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:16.866Z,1516677916.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:17.244Z,1516677917.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:17.271Z,1516677917.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:17.636Z,1516677917.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:17.667Z,1516677917.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:18.032Z,1516677918.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:25:18.072Z,1516677918.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:18.523Z,1516677918.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:18.868Z,1516677918.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:19.291Z,1516677919.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:19.686Z,1516677919.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:20.077Z,1516677920.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:20.489Z,1516677920.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:20.886Z,1516677920.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:21.261Z,1516677921.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:21.656Z,1516677921.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:22.069Z,1516677922.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:25.715Z,1516677925.715 [NAL9602](INFO): Powering up NAL9602 2018-01-23T03:25:25.756Z,1516677925.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:25.896Z,1516677925.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:26.252Z,1516677926.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:26.651Z,1516677926.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:27.053Z,1516677927.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:27.448Z,1516677927.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:27.859Z,1516677927.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:28.233Z,1516677928.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:28.656Z,1516677928.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:29.039Z,1516677929.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:29.443Z,1516677929.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:29.840Z,1516677929.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:30.243Z,1516677930.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:30.638Z,1516677930.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:31.049Z,1516677931.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:31.441Z,1516677931.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:31.843Z,1516677931.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:32.243Z,1516677932.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:32.650Z,1516677932.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:33.038Z,1516677933.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:33.440Z,1516677933.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:33.855Z,1516677933.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:34.240Z,1516677934.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:34.668Z,1516677934.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:35.054Z,1516677935.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:35.442Z,1516677935.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:35.843Z,1516677935.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:36.247Z,1516677936.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:36.604Z,1516677936.604 [NAL9602](INFO): NAL9602 initialized 2018-01-23T03:25:36.655Z,1516677936.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:37.045Z,1516677937.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:37.451Z,1516677937.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:37.850Z,1516677937.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:38.262Z,1516677938.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:38.649Z,1516677938.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:39.045Z,1516677939.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:39.456Z,1516677939.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:39.849Z,1516677939.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:40.247Z,1516677940.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:40.658Z,1516677940.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:41.069Z,1516677941.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:41.460Z,1516677941.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:41.853Z,1516677941.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:42.257Z,1516677942.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:42.651Z,1516677942.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:43.053Z,1516677943.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:43.462Z,1516677943.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:43.860Z,1516677943.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:44.257Z,1516677944.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:44.653Z,1516677944.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:45.059Z,1516677945.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:45.435Z,1516677945.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:45.837Z,1516677945.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:46.239Z,1516677946.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:46.674Z,1516677946.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:47.077Z,1516677947.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:47.468Z,1516677947.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:47.874Z,1516677947.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:48.249Z,1516677948.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:48.639Z,1516677948.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:49.046Z,1516677949.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:49.472Z,1516677949.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:49.869Z,1516677949.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:50.270Z,1516677950.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:50.649Z,1516677950.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:51.040Z,1516677951.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:51.443Z,1516677951.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:51.841Z,1516677951.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:52.243Z,1516677952.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:52.669Z,1516677952.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:53.068Z,1516677953.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:53.469Z,1516677953.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:53.848Z,1516677953.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:54.241Z,1516677954.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:54.644Z,1516677954.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:55.060Z,1516677955.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:55.459Z,1516677955.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:55.874Z,1516677955.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:56.276Z,1516677956.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:56.643Z,1516677956.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:57.042Z,1516677957.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:57.452Z,1516677957.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:57.850Z,1516677957.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:58.250Z,1516677958.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:58.644Z,1516677958.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:59.043Z,1516677959.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:59.446Z,1516677959.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:25:59.857Z,1516677959.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:00.249Z,1516677960.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:00.644Z,1516677960.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:01.042Z,1516677961.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:01.450Z,1516677961.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:01.849Z,1516677961.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:02.256Z,1516677962.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:02.637Z,1516677962.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:03.060Z,1516677963.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:03.464Z,1516677963.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:03.862Z,1516677963.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:04.263Z,1516677964.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:04.655Z,1516677964.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:05.057Z,1516677965.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:05.464Z,1516677965.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:05.872Z,1516677965.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:06.263Z,1516677966.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:06.652Z,1516677966.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:07.063Z,1516677967.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:07.463Z,1516677967.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:07.868Z,1516677967.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:08.266Z,1516677968.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:08.657Z,1516677968.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:09.036Z,1516677969.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:09.471Z,1516677969.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:09.870Z,1516677969.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:10.269Z,1516677970.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:10.641Z,1516677970.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:11.044Z,1516677971.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:11.450Z,1516677971.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:11.853Z,1516677971.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:12.276Z,1516677972.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:12.643Z,1516677972.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:13.044Z,1516677973.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:13.446Z,1516677973.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:13.849Z,1516677973.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:14.246Z,1516677974.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:14.643Z,1516677974.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:15.044Z,1516677975.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:15.446Z,1516677975.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:15.446Z,1516677975.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-01-23T03:26:15.446Z,1516677975.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:26:15.448Z,1516677975.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:15.448Z,1516677975.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-01-23T03:26:15.448Z,1516677975.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:26:15.450Z,1516677975.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:15.450Z,1516677975.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4 2018-01-23T03:26:15.450Z,1516677975.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:26:15.474Z,1516677975.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:26:15.474Z,1516677975.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:26:15.474Z,1516677975.474 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:26:15.869Z,1516677975.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:26:15.869Z,1516677975.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-01-23T03:26:15.869Z,1516677975.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:26:15.869Z,1516677975.869 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-01-23T03:26:15.870Z,1516677975.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:26:15.870Z,1516677975.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4 2018-01-23T03:26:16.249Z,1516677976.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:26:16.249Z,1516677976.249 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:26:16.250Z,1516677976.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:26:16.250Z,1516677976.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:26:16.250Z,1516677976.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:26:16.251Z,1516677976.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:26:16.251Z,1516677976.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:26:16.252Z,1516677976.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:26:16.252Z,1516677976.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:26:16.653Z,1516677976.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:26:16.654Z,1516677976.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:17.048Z,1516677977.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:26:17.049Z,1516677977.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:17.454Z,1516677977.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:26:17.455Z,1516677977.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:17.864Z,1516677977.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:26:17.865Z,1516677977.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:18.259Z,1516677978.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:26:18.260Z,1516677978.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:18.653Z,1516677978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:26:18.654Z,1516677978.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:19.048Z,1516677979.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:26:19.049Z,1516677979.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:19.456Z,1516677979.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:26:19.457Z,1516677979.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:19.863Z,1516677979.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:26:19.864Z,1516677979.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:20.268Z,1516677980.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:26:20.269Z,1516677980.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:20.623Z,1516677980.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:20.652Z,1516677980.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:26:20.653Z,1516677980.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:21.022Z,1516677981.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:21.048Z,1516677981.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:26:21.049Z,1516677981.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:21.445Z,1516677981.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:21.464Z,1516677981.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:26:21.465Z,1516677981.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:21.849Z,1516677981.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:21.868Z,1516677981.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:26:21.869Z,1516677981.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:22.240Z,1516677982.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:22.259Z,1516677982.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:26:22.260Z,1516677982.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:25.328Z,1516677985.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:25.352Z,1516677985.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T03:26:25.353Z,1516677985.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:25.456Z,1516677985.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:25.470Z,1516677985.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:26:25.472Z,1516677985.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:25.816Z,1516677985.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:25.830Z,1516677985.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:26:25.831Z,1516677985.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:26.224Z,1516677986.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:26.237Z,1516677986.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:26:26.238Z,1516677986.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:26.615Z,1516677986.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:26.629Z,1516677986.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:26:26.630Z,1516677986.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:27.008Z,1516677987.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:27.022Z,1516677987.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:26:27.023Z,1516677987.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:27.410Z,1516677987.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:27.424Z,1516677987.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:26:27.425Z,1516677987.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:27.806Z,1516677987.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:27.827Z,1516677987.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:26:27.828Z,1516677987.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:28.204Z,1516677988.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:28.233Z,1516677988.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:26:28.234Z,1516677988.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:28.628Z,1516677988.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:28.642Z,1516677988.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:26:28.667Z,1516677988.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:29.015Z,1516677989.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:29.028Z,1516677989.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:26:29.029Z,1516677989.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:29.415Z,1516677989.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:29.436Z,1516677989.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:26:29.437Z,1516677989.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:29.810Z,1516677989.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:29.823Z,1516677989.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:26:29.824Z,1516677989.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:30.208Z,1516677990.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:30.227Z,1516677990.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:26:30.228Z,1516677990.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:30.604Z,1516677990.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:26:30.626Z,1516677990.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:26:30.627Z,1516677990.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:31.024Z,1516677991.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:26:31.025Z,1516677991.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:31.424Z,1516677991.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:26:31.424Z,1516677991.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:31.863Z,1516677991.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:26:31.864Z,1516677991.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:32.240Z,1516677992.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:26:32.241Z,1516677992.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:32.636Z,1516677992.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:26:32.637Z,1516677992.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:33.032Z,1516677993.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:26:33.033Z,1516677993.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:33.431Z,1516677993.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:26:33.432Z,1516677993.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:33.828Z,1516677993.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:26:33.828Z,1516677993.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:34.226Z,1516677994.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:26:34.231Z,1516677994.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:34.637Z,1516677994.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:26:34.638Z,1516677994.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:35.037Z,1516677995.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:26:35.038Z,1516677995.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:35.444Z,1516677995.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T03:26:35.445Z,1516677995.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:35.832Z,1516677995.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:36.223Z,1516677996.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:36.629Z,1516677996.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:37.028Z,1516677997.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:37.424Z,1516677997.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:37.833Z,1516677997.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:38.237Z,1516677998.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:38.641Z,1516677998.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:39.037Z,1516677999.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:39.428Z,1516677999.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:39.829Z,1516677999.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:40.234Z,1516678000.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:40.635Z,1516678000.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:41.033Z,1516678001.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:41.435Z,1516678001.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:41.820Z,1516678001.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:42.245Z,1516678002.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:42.633Z,1516678002.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:43.029Z,1516678003.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:43.425Z,1516678003.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:43.858Z,1516678003.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:44.229Z,1516678004.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:44.637Z,1516678004.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:45.029Z,1516678005.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:45.428Z,1516678005.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:45.828Z,1516678005.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:46.227Z,1516678006.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:46.636Z,1516678006.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:47.041Z,1516678007.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:47.435Z,1516678007.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:47.827Z,1516678007.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:48.226Z,1516678008.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:48.632Z,1516678008.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:49.031Z,1516678009.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:49.431Z,1516678009.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:49.834Z,1516678009.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:50.233Z,1516678010.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:50.634Z,1516678010.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:51.026Z,1516678011.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:51.427Z,1516678011.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:51.828Z,1516678011.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:52.231Z,1516678012.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:52.641Z,1516678012.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:53.040Z,1516678013.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:53.434Z,1516678013.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:53.828Z,1516678013.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:54.235Z,1516678014.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:54.639Z,1516678014.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:55.032Z,1516678015.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:55.437Z,1516678015.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:55.840Z,1516678015.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:56.242Z,1516678016.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:56.645Z,1516678016.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:57.030Z,1516678017.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:57.431Z,1516678017.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:57.828Z,1516678017.828 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T03:26:57.860Z,1516678017.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:58.236Z,1516678018.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:58.639Z,1516678018.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:59.053Z,1516678019.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:59.446Z,1516678019.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:26:59.832Z,1516678019.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:00.236Z,1516678020.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:00.647Z,1516678020.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:01.036Z,1516678021.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:01.432Z,1516678021.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:01.846Z,1516678021.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:02.243Z,1516678022.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:02.638Z,1516678022.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:03.029Z,1516678023.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:03.439Z,1516678023.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:03.852Z,1516678023.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:04.220Z,1516678024.220 [PNI_TCM](ERROR): CRC does not match. Expected:0x52110 got:0x11409 2018-01-23T03:27:04.244Z,1516678024.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:04.634Z,1516678024.634 [PNI_TCM](ERROR): CRC does not match. Expected:0x30013 got:0x1857 2018-01-23T03:27:04.653Z,1516678024.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:05.037Z,1516678025.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:05.453Z,1516678025.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:05.835Z,1516678025.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:06.229Z,1516678026.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:06.610Z,1516678026.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x21331 got:0x33382 2018-01-23T03:27:06.634Z,1516678026.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:07.045Z,1516678027.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:07.432Z,1516678027.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:07.845Z,1516678027.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:08.243Z,1516678028.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:08.653Z,1516678028.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:09.032Z,1516678029.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:09.436Z,1516678029.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:09.837Z,1516678029.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:10.231Z,1516678030.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:10.639Z,1516678030.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:11.039Z,1516678031.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:11.437Z,1516678031.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:11.840Z,1516678031.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:12.221Z,1516678032.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:12.638Z,1516678032.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:13.037Z,1516678033.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:13.435Z,1516678033.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:13.853Z,1516678033.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:14.246Z,1516678034.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:14.642Z,1516678034.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:15.048Z,1516678035.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:15.449Z,1516678035.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:15.836Z,1516678035.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:16.239Z,1516678036.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:16.688Z,1516678036.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:17.026Z,1516678037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:17.450Z,1516678037.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:17.855Z,1516678037.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:18.246Z,1516678038.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:18.649Z,1516678038.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:19.028Z,1516678039.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:19.425Z,1516678039.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:19.830Z,1516678039.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:20.230Z,1516678040.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:20.626Z,1516678040.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:21.028Z,1516678041.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:21.436Z,1516678041.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:21.826Z,1516678041.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:22.229Z,1516678042.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:22.634Z,1516678042.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:25.738Z,1516678045.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:25.876Z,1516678045.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:26.247Z,1516678046.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:26.627Z,1516678046.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:27.033Z,1516678047.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:27.429Z,1516678047.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:27.830Z,1516678047.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:28.234Z,1516678048.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:28.664Z,1516678048.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:29.032Z,1516678049.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:29.433Z,1516678049.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:29.835Z,1516678049.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:30.232Z,1516678050.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:30.644Z,1516678050.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:31.041Z,1516678051.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:31.444Z,1516678051.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:31.829Z,1516678051.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:32.228Z,1516678052.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:32.640Z,1516678052.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:33.033Z,1516678053.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:33.433Z,1516678053.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:33.848Z,1516678053.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:34.239Z,1516678054.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:34.638Z,1516678054.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:35.028Z,1516678055.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:35.430Z,1516678055.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:35.830Z,1516678055.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:36.229Z,1516678056.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:36.643Z,1516678056.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:37.042Z,1516678057.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:37.449Z,1516678057.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:37.837Z,1516678057.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:38.228Z,1516678058.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:38.669Z,1516678058.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:39.028Z,1516678059.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:39.437Z,1516678059.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:39.839Z,1516678059.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:40.242Z,1516678060.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:40.642Z,1516678060.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:41.036Z,1516678061.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:41.434Z,1516678061.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:41.836Z,1516678061.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:42.233Z,1516678062.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:42.639Z,1516678062.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:43.051Z,1516678063.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:43.443Z,1516678063.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:43.825Z,1516678063.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:44.240Z,1516678064.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:44.642Z,1516678064.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:45.036Z,1516678065.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:45.441Z,1516678065.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:45.847Z,1516678065.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:46.242Z,1516678066.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:46.649Z,1516678066.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:47.023Z,1516678067.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:47.424Z,1516678067.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:47.829Z,1516678067.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:48.235Z,1516678068.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:48.658Z,1516678068.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:49.038Z,1516678069.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:49.436Z,1516678069.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:49.829Z,1516678069.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:50.228Z,1516678070.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:50.630Z,1516678070.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:51.034Z,1516678071.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:51.442Z,1516678071.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:51.832Z,1516678071.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:52.226Z,1516678072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:52.629Z,1516678072.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:53.028Z,1516678073.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:53.428Z,1516678073.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:53.837Z,1516678073.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:54.244Z,1516678074.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:54.641Z,1516678074.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:55.026Z,1516678075.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:55.432Z,1516678075.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:55.832Z,1516678075.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:56.230Z,1516678076.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:56.638Z,1516678076.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:57.037Z,1516678077.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:57.445Z,1516678077.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:57.837Z,1516678077.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:58.229Z,1516678078.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:58.639Z,1516678078.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:59.060Z,1516678079.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:59.440Z,1516678079.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:27:59.841Z,1516678079.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:00.225Z,1516678080.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:00.649Z,1516678080.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:01.053Z,1516678081.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:01.460Z,1516678081.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:01.849Z,1516678081.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:02.233Z,1516678082.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:02.659Z,1516678082.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:03.038Z,1516678083.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:03.442Z,1516678083.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:03.830Z,1516678083.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:04.227Z,1516678084.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:04.633Z,1516678084.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:05.035Z,1516678085.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:05.437Z,1516678085.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:05.828Z,1516678085.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:06.237Z,1516678086.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:06.633Z,1516678086.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:07.034Z,1516678087.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:07.434Z,1516678087.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:07.829Z,1516678087.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:08.226Z,1516678088.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:08.634Z,1516678088.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:09.034Z,1516678089.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:09.437Z,1516678089.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:09.833Z,1516678089.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:10.227Z,1516678090.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:10.633Z,1516678090.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:11.034Z,1516678091.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:11.437Z,1516678091.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:11.830Z,1516678091.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:12.229Z,1516678092.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:12.637Z,1516678092.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:13.046Z,1516678093.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:13.437Z,1516678093.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:13.830Z,1516678093.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:14.235Z,1516678094.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:14.641Z,1516678094.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:15.043Z,1516678095.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:15.453Z,1516678095.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:15.834Z,1516678095.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:16.236Z,1516678096.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:16.652Z,1516678096.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:17.046Z,1516678097.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:17.445Z,1516678097.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:17.830Z,1516678097.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:18.240Z,1516678098.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:18.638Z,1516678098.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:19.050Z,1516678099.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:19.445Z,1516678099.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:19.837Z,1516678099.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:20.234Z,1516678100.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:20.645Z,1516678100.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:21.046Z,1516678101.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:21.439Z,1516678101.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:21.442Z,1516678101.442 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T03:28:21.442Z,1516678101.442 [Default:CheckIn:C.Wait] Stopped 2018-01-23T03:28:21.442Z,1516678101.442 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T03:28:21.442Z,1516678101.442 [Default:CheckIn:D] Running Loop=1 2018-01-23T03:28:21.837Z,1516678101.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:21.841Z,1516678101.841 [Default:CheckIn:D] Stopped 2018-01-23T03:28:21.841Z,1516678101.841 [Default:CheckIn:E] Running Loop=1 2018-01-23T03:28:22.230Z,1516678102.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:22.233Z,1516678102.233 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.496333 min 2018-01-23T03:28:22.235Z,1516678102.235 [Default:CheckIn:E] Stopped 2018-01-23T03:28:22.235Z,1516678102.235 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn] Stopped 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn](INFO): Running loop #2 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn] Running Loop=2 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T03:28:22.236Z,1516678102.236 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T03:28:22.651Z,1516678102.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:25.744Z,1516678105.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:25.889Z,1516678105.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:26.233Z,1516678106.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:26.638Z,1516678106.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:27.012Z,1516678107.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:27.413Z,1516678107.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:27.817Z,1516678107.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:28.242Z,1516678108.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:28.626Z,1516678108.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:29.016Z,1516678109.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:29.416Z,1516678109.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:29.817Z,1516678109.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:30.213Z,1516678110.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:30.612Z,1516678110.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:31.021Z,1516678111.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:31.421Z,1516678111.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:31.818Z,1516678111.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:32.211Z,1516678112.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:32.611Z,1516678112.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:33.013Z,1516678113.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:33.411Z,1516678113.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:33.824Z,1516678113.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:34.222Z,1516678114.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:34.618Z,1516678114.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:35.012Z,1516678115.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:35.412Z,1516678115.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:35.813Z,1516678115.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:36.213Z,1516678116.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:36.613Z,1516678116.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:37.022Z,1516678117.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:37.422Z,1516678117.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:37.821Z,1516678117.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:38.212Z,1516678118.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:38.613Z,1516678118.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:39.015Z,1516678119.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:39.412Z,1516678119.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:39.822Z,1516678119.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:40.223Z,1516678120.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:40.621Z,1516678120.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:41.013Z,1516678121.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:41.412Z,1516678121.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:41.816Z,1516678121.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:42.213Z,1516678122.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:42.613Z,1516678122.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:43.022Z,1516678123.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:43.421Z,1516678123.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:43.829Z,1516678123.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:44.221Z,1516678124.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:44.603Z,1516678124.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:44.617Z,1516678124.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:45.002Z,1516678125.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:45.017Z,1516678125.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:45.397Z,1516678125.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:45.411Z,1516678125.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:45.821Z,1516678125.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:46.221Z,1516678126.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:46.621Z,1516678126.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:47.000Z,1516678127.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:47.014Z,1516678127.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:47.398Z,1516678127.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:47.412Z,1516678127.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:47.798Z,1516678127.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:47.812Z,1516678127.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:48.200Z,1516678128.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:48.214Z,1516678128.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:48.598Z,1516678128.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:48.612Z,1516678128.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:49.007Z,1516678129.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:49.021Z,1516678129.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:49.409Z,1516678129.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:49.423Z,1516678129.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:49.820Z,1516678129.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:49.834Z,1516678129.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:50.206Z,1516678130.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:50.225Z,1516678130.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:50.600Z,1516678130.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:50.620Z,1516678130.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:50.998Z,1516678130.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:51.017Z,1516678131.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:51.392Z,1516678131.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:51.425Z,1516678131.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:51.811Z,1516678131.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:51.825Z,1516678131.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:52.209Z,1516678132.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:52.223Z,1516678132.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:52.609Z,1516678132.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:52.624Z,1516678132.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:53.009Z,1516678133.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:53.023Z,1516678133.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:53.398Z,1516678133.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:53.421Z,1516678133.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:53.792Z,1516678133.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:53.814Z,1516678133.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:54.190Z,1516678134.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:54.218Z,1516678134.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:54.589Z,1516678134.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:54.625Z,1516678134.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:55.011Z,1516678135.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:55.026Z,1516678135.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:55.413Z,1516678135.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:55.428Z,1516678135.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:55.809Z,1516678135.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:55.824Z,1516678135.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:56.189Z,1516678136.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:56.225Z,1516678136.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:56.593Z,1516678136.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:56.620Z,1516678136.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:56.991Z,1516678136.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:57.021Z,1516678137.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:57.390Z,1516678137.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:57.420Z,1516678137.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:57.801Z,1516678137.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:57.835Z,1516678137.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:58.201Z,1516678138.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:58.237Z,1516678138.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:58.601Z,1516678138.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:58.626Z,1516678138.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:58.989Z,1516678138.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:59.033Z,1516678139.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:59.393Z,1516678139.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:59.429Z,1516678139.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:28:59.789Z,1516678139.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:28:59.826Z,1516678139.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:00.190Z,1516678140.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:00.204Z,1516678140.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:00.593Z,1516678140.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:00.613Z,1516678140.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:01.008Z,1516678141.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:01.043Z,1516678141.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:01.416Z,1516678141.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:01.443Z,1516678141.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:01.812Z,1516678141.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:01.843Z,1516678141.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:02.194Z,1516678142.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:02.216Z,1516678142.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:02.596Z,1516678142.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:02.622Z,1516678142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:02.996Z,1516678142.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:03.016Z,1516678143.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:03.392Z,1516678143.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:03.419Z,1516678143.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:03.809Z,1516678143.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:03.823Z,1516678143.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:04.211Z,1516678144.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:04.225Z,1516678144.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:04.609Z,1516678144.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:04.623Z,1516678144.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:04.989Z,1516678144.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:05.025Z,1516678145.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:05.400Z,1516678145.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:05.419Z,1516678145.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:05.789Z,1516678145.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:05.815Z,1516678145.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:06.190Z,1516678146.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:06.225Z,1516678146.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:06.587Z,1516678146.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:06.617Z,1516678146.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:07.008Z,1516678147.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:07.022Z,1516678147.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:07.413Z,1516678147.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:07.432Z,1516678147.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:07.813Z,1516678147.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:07.827Z,1516678147.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:08.189Z,1516678148.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:08.215Z,1516678148.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:08.589Z,1516678148.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:08.622Z,1516678148.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:08.990Z,1516678148.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:09.016Z,1516678149.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:09.389Z,1516678149.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:09.421Z,1516678149.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:09.807Z,1516678149.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:09.830Z,1516678149.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:10.206Z,1516678150.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:10.232Z,1516678150.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:10.612Z,1516678150.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:10.626Z,1516678150.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:10.989Z,1516678150.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:11.023Z,1516678151.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:11.389Z,1516678151.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:11.420Z,1516678151.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:11.789Z,1516678151.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:11.821Z,1516678151.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:12.190Z,1516678152.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:12.222Z,1516678152.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:12.589Z,1516678152.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:12.621Z,1516678152.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:13.004Z,1516678153.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:13.026Z,1516678153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:13.413Z,1516678153.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:13.427Z,1516678153.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:13.808Z,1516678153.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:13.823Z,1516678153.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:14.188Z,1516678154.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:14.221Z,1516678154.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:14.589Z,1516678154.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:14.626Z,1516678154.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:14.994Z,1516678154.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:15.019Z,1516678155.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:15.389Z,1516678155.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:15.425Z,1516678155.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:15.814Z,1516678155.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:15.828Z,1516678155.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:16.200Z,1516678156.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:16.233Z,1516678156.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:16.616Z,1516678156.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:16.630Z,1516678156.630 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:16.630Z,1516678156.630 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-01-23T03:29:16.631Z,1516678156.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:29:16.632Z,1516678156.632 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:16.633Z,1516678156.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-01-23T03:29:16.633Z,1516678156.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:29:16.634Z,1516678156.634 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:16.634Z,1516678156.634 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5 2018-01-23T03:29:16.635Z,1516678156.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:29:16.647Z,1516678156.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:29:16.647Z,1516678156.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:29:16.647Z,1516678156.647 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:29:16.989Z,1516678156.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:17.044Z,1516678157.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:29:17.044Z,1516678157.044 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-01-23T03:29:17.044Z,1516678157.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:29:17.044Z,1516678157.044 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-01-23T03:29:17.045Z,1516678157.045 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:29:17.045Z,1516678157.045 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5 2018-01-23T03:29:17.390Z,1516678157.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:17.424Z,1516678157.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:29:17.424Z,1516678157.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:29:17.424Z,1516678157.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:29:17.425Z,1516678157.425 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:29:17.425Z,1516678157.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:29:17.426Z,1516678157.426 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:29:17.426Z,1516678157.426 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:29:17.426Z,1516678157.426 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:29:17.431Z,1516678157.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:29:17.801Z,1516678157.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:17.836Z,1516678157.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:29:17.837Z,1516678157.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:18.203Z,1516678158.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:18.241Z,1516678158.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:29:18.242Z,1516678158.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:18.597Z,1516678158.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:18.632Z,1516678158.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:29:18.633Z,1516678158.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:19.012Z,1516678159.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:19.040Z,1516678159.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:29:19.041Z,1516678159.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:19.416Z,1516678159.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:19.441Z,1516678159.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:29:19.442Z,1516678159.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:19.809Z,1516678159.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:19.843Z,1516678159.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:29:19.844Z,1516678159.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:20.199Z,1516678160.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:20.213Z,1516678160.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:29:20.214Z,1516678160.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:20.598Z,1516678160.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:20.612Z,1516678160.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:29:20.613Z,1516678160.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:20.997Z,1516678160.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:21.014Z,1516678161.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:29:21.016Z,1516678161.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:21.402Z,1516678161.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:21.421Z,1516678161.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:29:21.422Z,1516678161.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:21.800Z,1516678161.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:21.814Z,1516678161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:29:21.815Z,1516678161.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:22.200Z,1516678162.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:22.214Z,1516678162.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:29:22.215Z,1516678162.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:22.600Z,1516678162.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:22.614Z,1516678162.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:29:22.615Z,1516678162.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:22.999Z,1516678162.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:23.012Z,1516678163.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:29:23.013Z,1516678163.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:26.097Z,1516678166.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:26.111Z,1516678166.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T03:29:26.112Z,1516678166.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:26.209Z,1516678166.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:26.252Z,1516678166.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:29:26.253Z,1516678166.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:26.593Z,1516678166.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:26.607Z,1516678166.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:29:26.608Z,1516678166.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:27.002Z,1516678167.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:27.015Z,1516678167.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:29:27.016Z,1516678167.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:27.388Z,1516678167.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:27.406Z,1516678167.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:29:27.407Z,1516678167.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:27.777Z,1516678167.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:27.808Z,1516678167.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:29:27.809Z,1516678167.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:28.175Z,1516678168.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:28.203Z,1516678168.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:29:28.204Z,1516678168.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:28.578Z,1516678168.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:28.604Z,1516678168.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:29:28.605Z,1516678168.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:28.997Z,1516678168.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:29.011Z,1516678169.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:29:29.012Z,1516678169.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:29.402Z,1516678169.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:29.416Z,1516678169.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:29:29.417Z,1516678169.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:29.798Z,1516678169.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:29.816Z,1516678169.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:29:29.817Z,1516678169.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:30.178Z,1516678170.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:30.203Z,1516678170.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:29:30.204Z,1516678170.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:30.578Z,1516678170.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:30.612Z,1516678170.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:29:30.613Z,1516678170.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:30.974Z,1516678170.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:31.000Z,1516678171.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:29:31.001Z,1516678171.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:31.374Z,1516678171.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:31.401Z,1516678171.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:29:31.402Z,1516678171.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:31.797Z,1516678171.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:31.812Z,1516678171.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:29:31.813Z,1516678171.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:32.196Z,1516678172.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:32.211Z,1516678172.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:29:32.212Z,1516678172.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:32.597Z,1516678172.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:32.611Z,1516678172.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:29:32.612Z,1516678172.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:32.978Z,1516678172.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:33.013Z,1516678173.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:29:33.014Z,1516678173.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:33.371Z,1516678173.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:33.393Z,1516678173.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:29:33.394Z,1516678173.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:33.777Z,1516678173.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:29:33.809Z,1516678173.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:29:33.810Z,1516678173.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:34.209Z,1516678174.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:29:34.210Z,1516678174.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:34.604Z,1516678174.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:29:34.605Z,1516678174.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:35.014Z,1516678175.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:29:35.016Z,1516678175.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:35.416Z,1516678175.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:29:35.417Z,1516678175.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:35.811Z,1516678175.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:29:35.812Z,1516678175.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:36.191Z,1516678176.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:29:36.192Z,1516678176.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:36.588Z,1516678176.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T03:29:36.589Z,1516678176.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:36.990Z,1516678176.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:37.397Z,1516678177.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:37.829Z,1516678177.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:38.195Z,1516678178.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:38.625Z,1516678178.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:38.992Z,1516678178.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:39.396Z,1516678179.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:39.797Z,1516678179.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:40.193Z,1516678180.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:40.593Z,1516678180.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:41.006Z,1516678181.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:41.402Z,1516678181.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:41.798Z,1516678181.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:42.197Z,1516678182.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:42.596Z,1516678182.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:43.005Z,1516678183.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:43.396Z,1516678183.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:43.801Z,1516678183.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:44.202Z,1516678184.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:44.602Z,1516678184.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:45.001Z,1516678185.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:45.400Z,1516678185.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:45.802Z,1516678185.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:46.205Z,1516678186.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:46.609Z,1516678186.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:47.005Z,1516678187.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:47.400Z,1516678187.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:47.802Z,1516678187.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:48.206Z,1516678188.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:48.608Z,1516678188.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:49.001Z,1516678189.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:49.396Z,1516678189.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:49.802Z,1516678189.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:50.202Z,1516678190.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:50.602Z,1516678190.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:51.000Z,1516678191.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:51.392Z,1516678191.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:51.802Z,1516678191.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:52.205Z,1516678192.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:52.602Z,1516678192.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:52.000Z,1516678193.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:53.396Z,1516678193.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:53.802Z,1516678193.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:54.206Z,1516678194.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:54.602Z,1516678194.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:55.005Z,1516678195.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:55.400Z,1516678195.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:55.802Z,1516678195.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:56.201Z,1516678196.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:56.603Z,1516678196.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:57.004Z,1516678197.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:57.393Z,1516678197.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:57.810Z,1516678197.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:58.209Z,1516678198.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:58.606Z,1516678198.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:59.005Z,1516678199.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:59.400Z,1516678199.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:29:59.809Z,1516678199.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:00.213Z,1516678200.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:00.610Z,1516678200.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:01.001Z,1516678201.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:01.399Z,1516678201.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:01.796Z,1516678201.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:01.813Z,1516678201.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:02.184Z,1516678202.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:02.205Z,1516678202.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:02.595Z,1516678202.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:02.617Z,1516678202.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:02.992Z,1516678202.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:03.389Z,1516678203.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:03.815Z,1516678203.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:04.196Z,1516678204.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:04.221Z,1516678204.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:04.588Z,1516678204.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:04.618Z,1516678204.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:04.980Z,1516678204.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:04.994Z,1516678204.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:05.381Z,1516678205.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:05.395Z,1516678205.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:05.788Z,1516678205.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:05.802Z,1516678205.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:06.192Z,1516678206.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:06.206Z,1516678206.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:06.584Z,1516678206.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:06.598Z,1516678206.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:06.985Z,1516678206.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:06.999Z,1516678206.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:07.383Z,1516678207.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:07.397Z,1516678207.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:07.788Z,1516678207.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:07.802Z,1516678207.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:08.183Z,1516678208.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:08.205Z,1516678208.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:08.588Z,1516678208.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:08.609Z,1516678208.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:08.987Z,1516678208.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:09.001Z,1516678209.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:09.370Z,1516678209.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:09.403Z,1516678209.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:09.789Z,1516678209.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:09.804Z,1516678209.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:10.206Z,1516678210.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:10.609Z,1516678210.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:10.998Z,1516678210.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:11.397Z,1516678211.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:11.807Z,1516678211.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:12.206Z,1516678212.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:12.606Z,1516678212.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:13.001Z,1516678213.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:13.405Z,1516678213.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:13.827Z,1516678213.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:14.219Z,1516678214.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:14.617Z,1516678214.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:15.036Z,1516678215.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:15.437Z,1516678215.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:15.831Z,1516678215.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:16.201Z,1516678216.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:16.597Z,1516678216.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:17.024Z,1516678217.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:17.429Z,1516678217.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:17.814Z,1516678217.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:18.202Z,1516678218.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:18.575Z,1516678218.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:18.604Z,1516678218.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:18.975Z,1516678218.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:19.006Z,1516678219.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:19.376Z,1516678219.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:19.420Z,1516678219.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:19.778Z,1516678219.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:19.816Z,1516678219.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:20.186Z,1516678220.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:20.209Z,1516678220.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:20.599Z,1516678220.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:20.625Z,1516678220.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:20.986Z,1516678220.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:21.013Z,1516678221.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:21.379Z,1516678221.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:21.398Z,1516678221.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:21.778Z,1516678221.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:21.793Z,1516678221.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:22.175Z,1516678222.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:22.189Z,1516678222.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:22.581Z,1516678222.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:22.601Z,1516678222.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:22.992Z,1516678222.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:23.006Z,1516678223.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:23.396Z,1516678223.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:23.410Z,1516678223.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:26.480Z,1516678226.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:26.501Z,1516678226.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:26.598Z,1516678226.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:26.612Z,1516678226.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:26.966Z,1516678226.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:26.997Z,1516678226.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:27.390Z,1516678227.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:27.409Z,1516678227.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:27.766Z,1516678227.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:27.796Z,1516678227.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:28.188Z,1516678228.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:28.203Z,1516678228.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:28.592Z,1516678228.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:28.606Z,1516678228.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:28.996Z,1516678228.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:29.010Z,1516678229.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:29.387Z,1516678229.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:29.401Z,1516678229.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:29.766Z,1516678229.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:29.802Z,1516678229.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:30.166Z,1516678230.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:30.192Z,1516678230.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:30.591Z,1516678230.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:30.613Z,1516678230.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:30.992Z,1516678230.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:31.007Z,1516678231.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:31.389Z,1516678231.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:31.404Z,1516678231.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:31.794Z,1516678231.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:31.808Z,1516678231.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:32.169Z,1516678232.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:32.205Z,1516678232.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:32.573Z,1516678232.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:32.601Z,1516678232.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:32.967Z,1516678232.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:32.993Z,1516678232.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:33.367Z,1516678233.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:33.405Z,1516678233.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:33.769Z,1516678233.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:33.799Z,1516678233.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:34.185Z,1516678234.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:34.217Z,1516678234.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:34.580Z,1516678234.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:34.617Z,1516678234.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:34.985Z,1516678234.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:35.011Z,1516678235.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:35.377Z,1516678235.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:35.414Z,1516678235.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:35.777Z,1516678235.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:35.817Z,1516678235.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:36.178Z,1516678236.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:36.193Z,1516678236.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:36.571Z,1516678236.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:36.586Z,1516678236.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:36.992Z,1516678236.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:37.018Z,1516678237.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:37.388Z,1516678237.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:37.418Z,1516678237.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:37.788Z,1516678237.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:37.802Z,1516678237.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:38.174Z,1516678238.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:38.189Z,1516678238.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:38.577Z,1516678238.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:38.592Z,1516678238.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:38.975Z,1516678238.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:38.998Z,1516678238.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:39.379Z,1516678239.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:39.401Z,1516678239.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:39.774Z,1516678239.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:39.788Z,1516678239.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:40.185Z,1516678240.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:40.209Z,1516678240.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:40.587Z,1516678240.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:40.609Z,1516678240.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:40.993Z,1516678240.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:41.007Z,1516678241.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:41.366Z,1516678241.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:41.402Z,1516678241.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:41.779Z,1516678241.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:41.793Z,1516678241.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:42.181Z,1516678242.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:42.196Z,1516678242.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:42.591Z,1516678242.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:42.605Z,1516678242.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:42.992Z,1516678242.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:43.006Z,1516678243.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:43.391Z,1516678243.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:43.405Z,1516678243.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:43.790Z,1516678243.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:43.804Z,1516678243.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:44.187Z,1516678244.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:44.201Z,1516678244.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:44.586Z,1516678244.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:44.600Z,1516678244.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:44.979Z,1516678244.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:44.998Z,1516678244.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:45.372Z,1516678245.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:45.407Z,1516678245.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:45.768Z,1516678245.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:45.804Z,1516678245.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:46.193Z,1516678246.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:46.208Z,1516678246.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:46.591Z,1516678246.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:46.606Z,1516678246.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:46.992Z,1516678246.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:47.007Z,1516678247.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:47.369Z,1516678247.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:47.400Z,1516678247.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:47.786Z,1516678247.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:47.801Z,1516678247.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:48.166Z,1516678248.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:48.194Z,1516678248.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:48.568Z,1516678248.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:48.594Z,1516678248.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:48.987Z,1516678248.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:49.010Z,1516678249.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:49.396Z,1516678249.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:49.411Z,1516678249.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:49.792Z,1516678249.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:49.806Z,1516678249.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:50.168Z,1516678250.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:50.196Z,1516678250.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:50.571Z,1516678250.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:50.601Z,1516678250.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:50.986Z,1516678250.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:51.000Z,1516678251.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:51.368Z,1516678251.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:51.401Z,1516678251.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:51.767Z,1516678251.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:51.784Z,1516678251.784 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T03:30:51.801Z,1516678251.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:52.190Z,1516678252.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:52.218Z,1516678252.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:52.589Z,1516678252.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:52.603Z,1516678252.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:52.983Z,1516678252.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:53.005Z,1516678253.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:53.367Z,1516678253.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:53.403Z,1516678253.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:53.769Z,1516678253.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:53.805Z,1516678253.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:54.170Z,1516678254.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:54.201Z,1516678254.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:54.567Z,1516678254.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:54.604Z,1516678254.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:54.991Z,1516678254.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:55.017Z,1516678255.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:55.382Z,1516678255.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:55.409Z,1516678255.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:55.794Z,1516678255.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:55.808Z,1516678255.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:56.166Z,1516678256.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:56.212Z,1516678256.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:56.569Z,1516678256.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:56.608Z,1516678256.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:56.968Z,1516678256.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:56.984Z,1516678256.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:57.371Z,1516678257.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:57.385Z,1516678257.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:57.767Z,1516678257.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:57.800Z,1516678257.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:58.182Z,1516678258.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:58.198Z,1516678258.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:58.582Z,1516678258.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:58.602Z,1516678258.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:58.981Z,1516678258.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:58.995Z,1516678258.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:59.378Z,1516678259.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:59.428Z,1516678259.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:30:59.772Z,1516678259.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:30:59.805Z,1516678259.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:00.166Z,1516678260.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:00.198Z,1516678260.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:00.568Z,1516678260.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:00.594Z,1516678260.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:00.989Z,1516678260.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:01.007Z,1516678261.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:01.392Z,1516678261.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:01.406Z,1516678261.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:01.787Z,1516678261.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:01.817Z,1516678261.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:02.168Z,1516678262.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:02.196Z,1516678262.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:02.565Z,1516678262.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:02.601Z,1516678262.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:02.965Z,1516678262.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:03.006Z,1516678263.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:03.367Z,1516678263.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:03.398Z,1516678263.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:03.767Z,1516678263.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:03.800Z,1516678263.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:04.180Z,1516678264.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:04.221Z,1516678264.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:04.580Z,1516678264.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:04.599Z,1516678264.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x27925 got:0x13577 2018-01-23T03:31:04.617Z,1516678264.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:04.981Z,1516678264.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:05.008Z,1516678265.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:05.366Z,1516678265.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:05.406Z,1516678265.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:05.766Z,1516678265.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:05.809Z,1516678265.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:06.166Z,1516678266.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:06.180Z,1516678266.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:06.573Z,1516678266.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:06.610Z,1516678266.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:06.982Z,1516678266.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:07.009Z,1516678267.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:07.384Z,1516678267.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:07.428Z,1516678267.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:07.780Z,1516678267.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:07.809Z,1516678267.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:08.173Z,1516678268.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:08.211Z,1516678268.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:08.565Z,1516678268.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:08.584Z,1516678268.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:08.973Z,1516678268.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:08.987Z,1516678268.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:09.378Z,1516678269.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:09.394Z,1516678269.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:09.771Z,1516678269.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:09.789Z,1516678269.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:10.186Z,1516678270.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:10.212Z,1516678270.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:10.580Z,1516678270.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:10.624Z,1516678270.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:10.988Z,1516678270.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:11.014Z,1516678271.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:11.372Z,1516678271.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:11.398Z,1516678271.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:11.772Z,1516678271.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:11.797Z,1516678271.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:12.176Z,1516678272.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:12.226Z,1516678272.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:12.574Z,1516678272.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:12.605Z,1516678272.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:12.988Z,1516678272.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:13.006Z,1516678273.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:13.389Z,1516678273.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:13.404Z,1516678273.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:13.788Z,1516678273.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:13.826Z,1516678273.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:14.172Z,1516678274.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:14.194Z,1516678274.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:14.574Z,1516678274.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:14.588Z,1516678274.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:14.974Z,1516678274.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:14.992Z,1516678274.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:15.372Z,1516678275.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:15.393Z,1516678275.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:15.774Z,1516678275.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:15.788Z,1516678275.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:16.188Z,1516678276.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:16.206Z,1516678276.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:16.590Z,1516678276.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:16.625Z,1516678276.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:16.984Z,1516678276.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:17.032Z,1516678277.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:17.375Z,1516678277.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:17.389Z,1516678277.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:17.770Z,1516678277.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:17.802Z,1516678277.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:18.175Z,1516678278.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:18.192Z,1516678278.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:18.576Z,1516678278.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:18.592Z,1516678278.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:18.988Z,1516678278.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:19.003Z,1516678279.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:19.387Z,1516678279.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:19.405Z,1516678279.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:19.790Z,1516678279.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:19.806Z,1516678279.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:20.172Z,1516678280.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:20.212Z,1516678280.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:20.574Z,1516678280.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:20.589Z,1516678280.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:20.981Z,1516678280.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:20.995Z,1516678280.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:21.376Z,1516678281.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:21.390Z,1516678281.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:21.778Z,1516678281.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:21.800Z,1516678281.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:22.190Z,1516678282.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:22.204Z,1516678282.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:22.587Z,1516678282.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:22.623Z,1516678282.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:22.984Z,1516678282.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:23.006Z,1516678283.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:23.372Z,1516678283.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:23.395Z,1516678283.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:23.770Z,1516678283.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:23.801Z,1516678283.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:26.863Z,1516678286.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:26.886Z,1516678286.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:26.986Z,1516678286.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:27.018Z,1516678287.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:27.349Z,1516678287.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:27.363Z,1516678287.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:27.748Z,1516678287.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:27.762Z,1516678287.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:28.144Z,1516678288.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:28.173Z,1516678288.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:28.541Z,1516678288.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:28.561Z,1516678288.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:28.939Z,1516678288.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:28.960Z,1516678288.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:29.343Z,1516678289.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:29.358Z,1516678289.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:29.732Z,1516678289.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:29.765Z,1516678289.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:30.149Z,1516678290.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:30.163Z,1516678290.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:30.552Z,1516678290.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:30.566Z,1516678290.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:30.949Z,1516678290.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:30.963Z,1516678290.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:31.340Z,1516678291.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:31.354Z,1516678291.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:31.741Z,1516678291.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:31.761Z,1516678291.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:32.133Z,1516678292.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:32.156Z,1516678292.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:32.538Z,1516678292.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:32.554Z,1516678292.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:32.948Z,1516678292.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:32.963Z,1516678292.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:33.353Z,1516678293.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:33.368Z,1516678293.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:33.749Z,1516678293.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:33.764Z,1516678293.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:34.136Z,1516678294.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:34.156Z,1516678294.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:34.532Z,1516678294.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:34.563Z,1516678294.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:34.949Z,1516678294.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:34.963Z,1516678294.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:35.349Z,1516678295.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:35.370Z,1516678295.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:35.748Z,1516678295.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:35.763Z,1516678295.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:36.130Z,1516678296.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:36.168Z,1516678296.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:36.533Z,1516678296.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:36.565Z,1516678296.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:36.949Z,1516678296.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:36.963Z,1516678296.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:37.353Z,1516678297.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:37.372Z,1516678297.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:37.744Z,1516678297.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:37.777Z,1516678297.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:38.134Z,1516678298.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:38.160Z,1516678298.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:38.529Z,1516678298.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:38.567Z,1516678298.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:38.949Z,1516678298.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:38.963Z,1516678298.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:39.351Z,1516678299.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:39.372Z,1516678299.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:39.772Z,1516678299.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:40.158Z,1516678300.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:40.560Z,1516678300.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:40.949Z,1516678300.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:40.969Z,1516678300.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:41.348Z,1516678301.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:41.366Z,1516678301.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:41.748Z,1516678301.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T03:31:41.763Z,1516678301.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:42.162Z,1516678302.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:42.561Z,1516678302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:42.977Z,1516678302.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:43.368Z,1516678303.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:43.773Z,1516678303.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:44.156Z,1516678304.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:44.567Z,1516678304.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:44.965Z,1516678304.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:45.377Z,1516678305.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:45.777Z,1516678305.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:46.164Z,1516678306.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:46.564Z,1516678306.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:46.975Z,1516678306.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:47.366Z,1516678307.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:47.774Z,1516678307.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:48.166Z,1516678308.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:48.565Z,1516678308.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:48.965Z,1516678308.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:49.377Z,1516678309.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:49.774Z,1516678309.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:50.165Z,1516678310.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:50.573Z,1516678310.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:50.969Z,1516678310.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:51.385Z,1516678311.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:51.781Z,1516678311.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:52.173Z,1516678312.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:52.549Z,1516678312.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:52.975Z,1516678312.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:53.375Z,1516678313.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:53.781Z,1516678313.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:54.154Z,1516678314.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:54.552Z,1516678314.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:54.955Z,1516678314.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:55.365Z,1516678315.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:55.759Z,1516678315.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:56.159Z,1516678316.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:56.555Z,1516678316.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:56.965Z,1516678316.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:57.370Z,1516678317.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:57.758Z,1516678317.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:58.153Z,1516678318.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:58.555Z,1516678318.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:58.953Z,1516678318.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:59.365Z,1516678319.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:31:59.763Z,1516678319.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:00.158Z,1516678320.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:00.561Z,1516678320.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:00.951Z,1516678320.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:01.353Z,1516678321.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:01.757Z,1516678321.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:02.157Z,1516678322.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:02.564Z,1516678322.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:02.969Z,1516678322.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:03.361Z,1516678323.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:03.752Z,1516678323.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:04.153Z,1516678324.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:04.560Z,1516678324.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:04.960Z,1516678324.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:05.373Z,1516678325.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:05.766Z,1516678325.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:06.162Z,1516678326.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:06.554Z,1516678326.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:06.965Z,1516678326.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:07.356Z,1516678327.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:07.760Z,1516678327.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:08.161Z,1516678328.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:08.561Z,1516678328.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:08.962Z,1516678328.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:09.353Z,1516678329.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:09.753Z,1516678329.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:10.165Z,1516678330.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:10.557Z,1516678330.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:10.963Z,1516678330.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:11.365Z,1516678331.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:11.765Z,1516678331.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:12.161Z,1516678332.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:12.561Z,1516678332.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:12.951Z,1516678332.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:13.352Z,1516678333.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:13.753Z,1516678333.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:14.162Z,1516678334.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:14.568Z,1516678334.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:14.969Z,1516678334.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:15.361Z,1516678335.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:15.756Z,1516678335.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:16.153Z,1516678336.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:16.554Z,1516678336.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:16.953Z,1516678336.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:17.373Z,1516678337.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:17.769Z,1516678337.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:17.769Z,1516678337.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-01-23T03:32:17.769Z,1516678337.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:32:17.771Z,1516678337.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:17.771Z,1516678337.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-01-23T03:32:17.771Z,1516678337.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:32:17.773Z,1516678337.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:17.773Z,1516678337.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6 2018-01-23T03:32:17.773Z,1516678337.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:32:17.817Z,1516678337.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:32:17.818Z,1516678337.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:32:17.818Z,1516678337.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:32:18.181Z,1516678338.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:32:18.181Z,1516678338.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-01-23T03:32:18.182Z,1516678338.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:32:18.182Z,1516678338.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-01-23T03:32:18.182Z,1516678338.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:32:18.182Z,1516678338.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6 2018-01-23T03:32:18.559Z,1516678338.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:32:18.560Z,1516678338.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:32:18.560Z,1516678338.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:32:18.560Z,1516678338.560 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:32:18.561Z,1516678338.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:32:18.561Z,1516678338.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:32:18.561Z,1516678338.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:32:18.562Z,1516678338.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:32:18.562Z,1516678338.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:32:18.963Z,1516678338.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:32:18.964Z,1516678338.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:19.365Z,1516678339.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:32:19.366Z,1516678339.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:19.761Z,1516678339.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:32:19.762Z,1516678339.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:20.177Z,1516678340.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:32:20.178Z,1516678340.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:20.566Z,1516678340.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:32:20.567Z,1516678340.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:20.968Z,1516678340.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:32:20.969Z,1516678340.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:21.360Z,1516678341.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:32:21.361Z,1516678341.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:21.742Z,1516678341.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:32:21.767Z,1516678341.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:22.164Z,1516678342.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:32:22.165Z,1516678342.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:22.543Z,1516678342.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:32:22.544Z,1516678342.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:22.952Z,1516678342.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:32:22.953Z,1516678342.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:23.370Z,1516678343.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:32:23.371Z,1516678343.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:23.776Z,1516678343.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:32:23.777Z,1516678343.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:24.176Z,1516678344.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:32:24.177Z,1516678344.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:27.253Z,1516678347.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T03:32:27.254Z,1516678347.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:27.401Z,1516678347.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:32:27.401Z,1516678347.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:27.777Z,1516678347.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:32:27.778Z,1516678347.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:28.180Z,1516678348.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:32:28.181Z,1516678348.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:28.579Z,1516678348.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:32:28.580Z,1516678348.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:28.948Z,1516678348.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:32:28.949Z,1516678348.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:29.345Z,1516678349.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:32:29.346Z,1516678349.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:29.744Z,1516678349.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:32:29.745Z,1516678349.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:30.158Z,1516678350.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:32:30.171Z,1516678350.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:30.554Z,1516678350.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:32:30.555Z,1516678350.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:30.950Z,1516678350.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:32:30.951Z,1516678350.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:31.346Z,1516678351.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:32:31.348Z,1516678351.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:31.754Z,1516678351.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:32:31.759Z,1516678351.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:32.151Z,1516678352.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:32:32.152Z,1516678352.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:32.553Z,1516678352.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:32:32.553Z,1516678352.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:32.949Z,1516678352.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:32:32.950Z,1516678352.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:33.353Z,1516678353.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:32:33.354Z,1516678353.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:33.752Z,1516678353.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:32:33.753Z,1516678353.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:34.155Z,1516678354.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:32:34.156Z,1516678354.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:34.551Z,1516678354.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:32:34.552Z,1516678354.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:34.949Z,1516678354.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:32:34.950Z,1516678354.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:35.352Z,1516678355.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:32:35.353Z,1516678355.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:35.750Z,1516678355.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:32:35.751Z,1516678355.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:36.153Z,1516678356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:32:36.154Z,1516678356.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:36.555Z,1516678356.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:32:36.556Z,1516678356.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:36.954Z,1516678356.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:32:36.955Z,1516678356.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:37.351Z,1516678357.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:32:37.352Z,1516678357.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:37.749Z,1516678357.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T03:32:37.750Z,1516678357.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:38.153Z,1516678358.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:38.548Z,1516678358.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:38.947Z,1516678358.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:39.356Z,1516678359.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:39.786Z,1516678359.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:40.154Z,1516678360.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:40.547Z,1516678360.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:40.961Z,1516678360.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:41.353Z,1516678361.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:41.746Z,1516678361.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:42.153Z,1516678362.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:42.554Z,1516678362.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:42.953Z,1516678362.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:43.347Z,1516678363.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:43.753Z,1516678363.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:44.149Z,1516678364.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:44.548Z,1516678364.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:44.948Z,1516678364.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:45.354Z,1516678365.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:45.754Z,1516678365.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:46.154Z,1516678366.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:46.550Z,1516678366.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:46.961Z,1516678366.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:47.358Z,1516678367.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:47.761Z,1516678367.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:48.162Z,1516678368.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:48.562Z,1516678368.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:48.965Z,1516678368.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:49.351Z,1516678369.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:49.752Z,1516678369.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:50.150Z,1516678370.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:50.553Z,1516678370.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:50.948Z,1516678370.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:51.364Z,1516678371.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:51.760Z,1516678371.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:52.159Z,1516678372.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:52.566Z,1516678372.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:52.951Z,1516678372.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:53.353Z,1516678373.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:53.756Z,1516678373.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:54.157Z,1516678374.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:54.565Z,1516678374.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:54.965Z,1516678374.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:55.349Z,1516678375.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:55.750Z,1516678375.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:56.156Z,1516678376.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:56.559Z,1516678376.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:56.953Z,1516678376.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:57.366Z,1516678377.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:57.768Z,1516678377.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:58.158Z,1516678378.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:58.559Z,1516678378.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:58.961Z,1516678378.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:59.361Z,1516678379.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:32:59.760Z,1516678379.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:00.169Z,1516678380.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:00.567Z,1516678380.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:00.968Z,1516678380.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:01.361Z,1516678381.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:01.751Z,1516678381.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:02.165Z,1516678382.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:02.543Z,1516678382.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:02.937Z,1516678382.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:03.368Z,1516678383.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:03.764Z,1516678383.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:04.165Z,1516678384.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:04.567Z,1516678384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:04.967Z,1516678384.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:05.345Z,1516678385.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:05.769Z,1516678385.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:06.176Z,1516678386.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:06.572Z,1516678386.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:06.971Z,1516678386.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:07.378Z,1516678387.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:07.744Z,1516678387.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:08.152Z,1516678388.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:08.549Z,1516678388.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:08.945Z,1516678388.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:09.355Z,1516678389.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:09.778Z,1516678389.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:10.151Z,1516678390.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:10.553Z,1516678390.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:10.946Z,1516678390.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:11.350Z,1516678391.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:11.749Z,1516678391.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:12.160Z,1516678392.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:12.558Z,1516678392.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:12.953Z,1516678392.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:13.348Z,1516678393.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:13.749Z,1516678393.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:14.152Z,1516678394.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:14.549Z,1516678394.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:14.948Z,1516678394.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:15.360Z,1516678395.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:15.764Z,1516678395.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:16.159Z,1516678396.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:16.548Z,1516678396.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:16.948Z,1516678396.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:17.357Z,1516678397.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:17.754Z,1516678397.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:18.158Z,1516678398.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:18.558Z,1516678398.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:18.957Z,1516678398.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:19.347Z,1516678399.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:19.748Z,1516678399.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:20.155Z,1516678400.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:20.558Z,1516678400.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:20.953Z,1516678400.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:21.362Z,1516678401.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:21.761Z,1516678401.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:22.161Z,1516678402.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:22.557Z,1516678402.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:22.560Z,1516678402.560 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T03:28:22.2Z 2018-01-23T03:33:22.560Z,1516678402.560 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T03:33:22.560Z,1516678402.560 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T03:33:22.959Z,1516678402.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:23.462Z,1516678403.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:23.757Z,1516678403.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:26.862Z,1516678406.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:26.942Z,1516678406.942 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0008.lzma 2018-01-23T03:33:27.021Z,1516678407.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:27.353Z,1516678407.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:27.692Z,1516678407.692 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0008.lzma.bak 2018-01-23T03:33:27.692Z,1516678407.692 [DataOverHttps](INFO): SBD MOMSN=7754926 2018-01-23T03:33:27.765Z,1516678407.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:28.357Z,1516678408.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:28.548Z,1516678408.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:31.656Z,1516678411.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:31.772Z,1516678411.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:32.122Z,1516678412.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:32.530Z,1516678412.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:32.918Z,1516678412.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:33.325Z,1516678413.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:36.426Z,1516678416.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:36.510Z,1516678416.510 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20180123T031358/Express0009.lzma 2018-01-23T03:33:36.575Z,1516678416.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:36.973Z,1516678416.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:37.309Z,1516678417.309 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0009.lzma.bak 2018-01-23T03:33:37.309Z,1516678417.309 [DataOverHttps](INFO): SBD MOMSN=7754928 2018-01-23T03:33:37.380Z,1516678417.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:37.969Z,1516678417.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:37.973Z,1516678417.973 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T03:33:37.973Z,1516678417.973 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T03:33:37.973Z,1516678417.973 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T03:33:38.140Z,1516678418.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:41.235Z,1516678421.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:41.369Z,1516678421.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:41.745Z,1516678421.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:42.142Z,1516678422.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:42.538Z,1516678422.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:42.929Z,1516678422.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:43.344Z,1516678423.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:43.730Z,1516678423.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:44.138Z,1516678424.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:44.543Z,1516678424.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:44.945Z,1516678424.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:45.332Z,1516678425.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:45.733Z,1516678425.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:46.137Z,1516678426.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:46.545Z,1516678426.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:46.938Z,1516678426.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:47.330Z,1516678427.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:47.738Z,1516678427.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:48.143Z,1516678428.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:48.545Z,1516678428.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:48.953Z,1516678428.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:49.333Z,1516678429.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:49.736Z,1516678429.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:50.141Z,1516678430.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:50.551Z,1516678430.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:50.939Z,1516678430.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:51.330Z,1516678431.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:51.752Z,1516678431.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:52.140Z,1516678432.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:52.542Z,1516678432.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:52.946Z,1516678432.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:53.348Z,1516678433.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:53.740Z,1516678433.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:54.141Z,1516678434.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:54.536Z,1516678434.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:54.944Z,1516678434.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:55.342Z,1516678435.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:55.744Z,1516678435.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:56.142Z,1516678436.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:56.523Z,1516678436.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:56.957Z,1516678436.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:57.329Z,1516678437.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:57.736Z,1516678437.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:58.130Z,1516678438.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:58.537Z,1516678438.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:58.945Z,1516678438.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:59.342Z,1516678439.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:33:59.730Z,1516678439.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:00.136Z,1516678440.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:00.532Z,1516678440.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:00.930Z,1516678440.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:01.341Z,1516678441.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:01.742Z,1516678441.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:02.142Z,1516678442.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:02.528Z,1516678442.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:02.937Z,1516678442.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:03.329Z,1516678443.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:03.733Z,1516678443.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:04.130Z,1516678444.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:04.538Z,1516678444.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:04.942Z,1516678444.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:05.342Z,1516678445.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:05.729Z,1516678445.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:06.132Z,1516678446.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:06.530Z,1516678446.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:06.938Z,1516678446.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:07.338Z,1516678447.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:07.742Z,1516678447.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:08.141Z,1516678448.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:08.528Z,1516678448.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:08.961Z,1516678448.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:09.325Z,1516678449.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:09.721Z,1516678449.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:10.177Z,1516678450.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:10.541Z,1516678450.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:10.942Z,1516678450.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:10.980Z,1516678450.980 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T03:34:11.339Z,1516678451.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:11.735Z,1516678451.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:12.130Z,1516678452.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:12.535Z,1516678452.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:12.936Z,1516678452.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:13.342Z,1516678453.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:13.745Z,1516678453.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:14.145Z,1516678454.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:14.531Z,1516678454.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:14.931Z,1516678454.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:15.345Z,1516678455.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:15.736Z,1516678455.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:16.133Z,1516678456.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:16.542Z,1516678456.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:16.949Z,1516678456.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:17.353Z,1516678457.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:17.741Z,1516678457.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:18.133Z,1516678458.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:18.541Z,1516678458.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:18.938Z,1516678458.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:19.340Z,1516678459.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:19.744Z,1516678459.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:20.145Z,1516678460.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:20.535Z,1516678460.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:20.937Z,1516678460.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:21.340Z,1516678461.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:21.734Z,1516678461.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:22.141Z,1516678462.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:22.546Z,1516678462.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:22.952Z,1516678462.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:23.345Z,1516678463.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:23.740Z,1516678463.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:24.138Z,1516678464.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:24.537Z,1516678464.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:24.939Z,1516678464.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:25.340Z,1516678465.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:25.753Z,1516678465.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:26.143Z,1516678466.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:26.534Z,1516678466.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:26.932Z,1516678466.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:27.340Z,1516678467.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:27.741Z,1516678467.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:28.113Z,1516678468.113 [PNI_TCM](ERROR): CRC does not match. Expected:0x7399 got:0x7106 2018-01-23T03:34:28.138Z,1516678468.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:28.547Z,1516678468.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:28.959Z,1516678468.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:29.349Z,1516678469.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:29.739Z,1516678469.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:30.148Z,1516678470.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:30.539Z,1516678470.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:30.944Z,1516678470.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:31.350Z,1516678471.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:31.753Z,1516678471.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:32.152Z,1516678472.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:32.546Z,1516678472.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:32.921Z,1516678472.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:33.354Z,1516678473.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:33.729Z,1516678473.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:34.148Z,1516678474.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:34.557Z,1516678474.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:34.941Z,1516678474.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:35.334Z,1516678475.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:35.745Z,1516678475.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:36.134Z,1516678476.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:36.532Z,1516678476.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:36.930Z,1516678476.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:37.359Z,1516678477.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:37.729Z,1516678477.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x42551 got:0x6466 2018-01-23T03:34:37.766Z,1516678477.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:38.141Z,1516678478.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:38.536Z,1516678478.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:41.633Z,1516678481.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:41.773Z,1516678481.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:42.143Z,1516678482.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:42.541Z,1516678482.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:42.933Z,1516678482.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:43.327Z,1516678483.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:43.729Z,1516678483.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:44.127Z,1516678484.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:44.530Z,1516678484.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:44.934Z,1516678484.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:45.348Z,1516678485.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:45.725Z,1516678485.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:46.128Z,1516678486.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:46.525Z,1516678486.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:46.925Z,1516678486.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:47.340Z,1516678487.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:47.734Z,1516678487.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:48.137Z,1516678488.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:48.528Z,1516678488.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:48.927Z,1516678488.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:49.330Z,1516678489.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:49.732Z,1516678489.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:50.127Z,1516678490.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:50.537Z,1516678490.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:50.938Z,1516678490.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:51.334Z,1516678491.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:51.732Z,1516678491.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:52.128Z,1516678492.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:52.527Z,1516678492.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:52.931Z,1516678492.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:53.337Z,1516678493.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:53.733Z,1516678493.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:54.140Z,1516678494.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:54.533Z,1516678494.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:54.927Z,1516678494.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:55.327Z,1516678495.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:55.729Z,1516678495.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:56.130Z,1516678496.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:56.533Z,1516678496.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:56.931Z,1516678496.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:57.340Z,1516678497.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:57.729Z,1516678497.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:58.128Z,1516678498.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:58.542Z,1516678498.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:58.927Z,1516678498.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:59.340Z,1516678499.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:34:59.731Z,1516678499.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:00.133Z,1516678500.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:00.529Z,1516678500.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:00.928Z,1516678500.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:01.327Z,1516678501.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:01.729Z,1516678501.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:02.127Z,1516678502.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:02.540Z,1516678502.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:02.931Z,1516678502.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:03.333Z,1516678503.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:03.727Z,1516678503.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:04.128Z,1516678504.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:04.527Z,1516678504.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:04.927Z,1516678504.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:05.337Z,1516678505.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:05.750Z,1516678505.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:06.133Z,1516678506.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:06.530Z,1516678506.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:06.905Z,1516678506.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:07.308Z,1516678507.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:07.712Z,1516678507.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:08.106Z,1516678508.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:08.545Z,1516678508.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:08.941Z,1516678508.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:09.339Z,1516678509.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:09.713Z,1516678509.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:10.124Z,1516678510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:10.516Z,1516678510.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:10.921Z,1516678510.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:11.323Z,1516678511.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:11.722Z,1516678511.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:12.125Z,1516678512.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:12.516Z,1516678512.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:12.915Z,1516678512.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:13.369Z,1516678513.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:13.736Z,1516678513.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:14.131Z,1516678514.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:14.541Z,1516678514.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:14.933Z,1516678514.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:15.350Z,1516678515.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:15.753Z,1516678515.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:16.140Z,1516678516.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:16.542Z,1516678516.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:16.937Z,1516678516.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:17.331Z,1516678517.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:17.733Z,1516678517.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.217Z,1516678518.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.553Z,1516678518.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.931Z,1516678518.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.931Z,1516678518.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-01-23T03:35:18.931Z,1516678518.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:35:18.933Z,1516678518.933 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.933Z,1516678518.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-01-23T03:35:18.933Z,1516678518.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:35:18.940Z,1516678518.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:18.940Z,1516678518.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7 2018-01-23T03:35:18.940Z,1516678518.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:35:18.968Z,1516678518.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:35:18.968Z,1516678518.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:35:18.968Z,1516678518.968 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:35:19.424Z,1516678519.424 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:35:19.424Z,1516678519.424 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-01-23T03:35:19.425Z,1516678519.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:35:19.425Z,1516678519.425 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-01-23T03:35:19.425Z,1516678519.425 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:35:19.425Z,1516678519.425 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7 2018-01-23T03:35:19.772Z,1516678519.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:35:19.772Z,1516678519.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:35:19.773Z,1516678519.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:35:19.774Z,1516678519.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:35:19.774Z,1516678519.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:35:19.775Z,1516678519.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:35:19.776Z,1516678519.776 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:35:19.776Z,1516678519.776 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:35:19.777Z,1516678519.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:35:20.125Z,1516678520.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:35:20.125Z,1516678520.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:20.537Z,1516678520.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:35:20.538Z,1516678520.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:20.976Z,1516678520.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:35:20.977Z,1516678520.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:21.345Z,1516678521.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:35:21.346Z,1516678521.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:21.728Z,1516678521.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:35:21.729Z,1516678521.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:22.129Z,1516678522.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:35:22.130Z,1516678522.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:22.539Z,1516678522.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:35:22.540Z,1516678522.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:22.928Z,1516678522.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:35:22.929Z,1516678522.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:23.338Z,1516678523.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:35:23.339Z,1516678523.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:23.737Z,1516678523.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:35:23.738Z,1516678523.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:24.137Z,1516678524.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:35:24.138Z,1516678524.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:24.541Z,1516678524.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:35:24.542Z,1516678524.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:24.912Z,1516678524.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:35:24.913Z,1516678524.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:25.339Z,1516678525.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:35:25.340Z,1516678525.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:25.742Z,1516678525.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:35:25.743Z,1516678525.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:26.121Z,1516678526.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:35:26.122Z,1516678526.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:26.516Z,1516678526.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:35:26.517Z,1516678526.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:26.920Z,1516678526.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:35:26.921Z,1516678526.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:27.319Z,1516678527.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:35:27.320Z,1516678527.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:27.721Z,1516678527.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:35:27.722Z,1516678527.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:28.195Z,1516678528.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T03:35:28.196Z,1516678528.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:28.516Z,1516678528.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:35:28.517Z,1516678528.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:28.916Z,1516678528.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:35:28.917Z,1516678528.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:29.324Z,1516678529.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:35:29.325Z,1516678529.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:29.728Z,1516678529.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:35:29.729Z,1516678529.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:30.132Z,1516678530.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:35:30.133Z,1516678530.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:30.516Z,1516678530.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:35:30.517Z,1516678530.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:30.980Z,1516678530.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:35:30.981Z,1516678530.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:31.332Z,1516678531.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:35:31.333Z,1516678531.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:31.730Z,1516678531.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:35:31.731Z,1516678531.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:32.125Z,1516678532.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:35:32.126Z,1516678532.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:32.517Z,1516678532.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:35:32.518Z,1516678532.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:32.926Z,1516678532.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:35:32.927Z,1516678532.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:33.326Z,1516678533.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:35:33.327Z,1516678533.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:33.729Z,1516678533.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:35:33.730Z,1516678533.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:34.135Z,1516678534.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:35:34.136Z,1516678534.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:34.524Z,1516678534.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:35:34.525Z,1516678534.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:34.924Z,1516678534.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:35:34.925Z,1516678534.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:35.327Z,1516678535.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:35:35.328Z,1516678535.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:35.793Z,1516678535.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T03:35:35.800Z,1516678535.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:36.130Z,1516678536.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:35:36.131Z,1516678536.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:36.524Z,1516678536.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:35:36.525Z,1516678536.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:36.913Z,1516678536.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:35:36.914Z,1516678536.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:37.328Z,1516678537.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:35:37.329Z,1516678537.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:37.676Z,1516678537.676 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T03:35:37.676Z,1516678537.676 [NAL9602] Data Fault, FailCount= 2 2018-01-23T03:35:37.676Z,1516678537.676 [NAL9602](ERROR): Data Fault 2018-01-23T03:35:37.738Z,1516678537.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:35:37.739Z,1516678537.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:37.753Z,1516678537.753 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T03:35:38.076Z,1516678538.076 [NAL9602](INFO): Powering down 2018-01-23T03:35:38.116Z,1516678538.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:35:38.117Z,1516678538.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:38.531Z,1516678538.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:35:38.532Z,1516678538.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:38.935Z,1516678538.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:38.948Z,1516678538.948 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T03:35:38.948Z,1516678538.948 [NAL9602] No Fault, FailCount= 2 2018-01-23T03:35:42.027Z,1516678542.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:42.160Z,1516678542.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:42.509Z,1516678542.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:42.908Z,1516678542.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:43.301Z,1516678543.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:43.709Z,1516678543.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:44.105Z,1516678544.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:44.505Z,1516678544.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:44.907Z,1516678544.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:45.304Z,1516678545.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:45.709Z,1516678545.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:46.108Z,1516678546.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:46.503Z,1516678546.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:46.900Z,1516678546.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:47.310Z,1516678547.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:47.710Z,1516678547.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:48.103Z,1516678548.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:48.513Z,1516678548.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:48.902Z,1516678548.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:49.303Z,1516678549.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:49.702Z,1516678549.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:50.102Z,1516678550.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:50.503Z,1516678550.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:50.904Z,1516678550.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:51.302Z,1516678551.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:51.702Z,1516678551.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:52.105Z,1516678552.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:52.502Z,1516678552.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:52.900Z,1516678552.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:53.304Z,1516678553.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:53.703Z,1516678553.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:54.100Z,1516678554.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:54.513Z,1516678554.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:54.903Z,1516678554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:55.300Z,1516678555.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:55.710Z,1516678555.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:56.103Z,1516678556.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:56.508Z,1516678556.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:56.906Z,1516678556.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:57.304Z,1516678557.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:57.705Z,1516678557.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:58.117Z,1516678558.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:58.503Z,1516678558.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:58.912Z,1516678558.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:59.313Z,1516678559.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:35:59.714Z,1516678559.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:00.113Z,1516678560.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:00.513Z,1516678560.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:00.913Z,1516678560.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:01.311Z,1516678561.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:01.716Z,1516678561.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:02.105Z,1516678562.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:02.511Z,1516678562.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:02.911Z,1516678562.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:03.313Z,1516678563.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:03.704Z,1516678563.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:04.112Z,1516678564.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:04.513Z,1516678564.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:04.911Z,1516678564.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:05.311Z,1516678565.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:05.708Z,1516678565.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:06.111Z,1516678566.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:06.513Z,1516678566.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:06.898Z,1516678566.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:07.304Z,1516678567.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:07.721Z,1516678567.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:08.099Z,1516678568.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:08.472Z,1516678568.472 [NAL9602](INFO): Powering up NAL9602 2018-01-23T03:36:08.504Z,1516678568.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:08.899Z,1516678568.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:09.306Z,1516678569.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:09.703Z,1516678569.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:10.103Z,1516678570.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:10.501Z,1516678570.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:10.900Z,1516678570.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:11.307Z,1516678571.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:11.703Z,1516678571.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:12.099Z,1516678572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:12.513Z,1516678572.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:12.903Z,1516678572.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:13.300Z,1516678573.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:13.704Z,1516678573.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:14.102Z,1516678574.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:14.502Z,1516678574.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:14.909Z,1516678574.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:15.302Z,1516678575.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:15.703Z,1516678575.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:16.111Z,1516678576.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:16.506Z,1516678576.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:16.900Z,1516678576.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:17.316Z,1516678577.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:17.706Z,1516678577.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:18.106Z,1516678578.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:18.503Z,1516678578.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:18.909Z,1516678578.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:19.310Z,1516678579.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:19.664Z,1516678579.664 [NAL9602](INFO): NAL9602 initialized 2018-01-23T03:36:19.712Z,1516678579.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:20.111Z,1516678580.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:20.513Z,1516678580.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:20.913Z,1516678580.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:21.304Z,1516678581.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:21.712Z,1516678581.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:22.107Z,1516678582.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:22.524Z,1516678582.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:22.913Z,1516678582.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:23.314Z,1516678583.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:23.715Z,1516678583.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:24.110Z,1516678584.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:24.512Z,1516678584.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:24.907Z,1516678584.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:25.317Z,1516678585.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:25.724Z,1516678585.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:26.133Z,1516678586.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:26.510Z,1516678586.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:26.912Z,1516678586.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:27.317Z,1516678587.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:27.709Z,1516678587.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:28.111Z,1516678588.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:28.521Z,1516678588.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:28.914Z,1516678588.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:29.317Z,1516678589.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:29.713Z,1516678589.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:30.101Z,1516678590.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:30.512Z,1516678590.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:30.894Z,1516678590.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:31.322Z,1516678591.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:31.729Z,1516678591.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:32.125Z,1516678592.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:32.505Z,1516678592.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:32.925Z,1516678592.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:33.301Z,1516678593.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:33.701Z,1516678593.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:34.105Z,1516678594.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:34.510Z,1516678594.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:34.911Z,1516678594.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:35.307Z,1516678595.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:35.703Z,1516678595.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:36.105Z,1516678596.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:36.503Z,1516678596.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:36.909Z,1516678596.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:37.307Z,1516678597.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:37.710Z,1516678597.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:38.136Z,1516678598.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:38.501Z,1516678598.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:38.909Z,1516678598.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:39.305Z,1516678599.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:42.407Z,1516678602.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:42.553Z,1516678602.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:42.894Z,1516678602.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:43.297Z,1516678603.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:43.690Z,1516678603.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:44.091Z,1516678604.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:44.468Z,1516678604.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:44.867Z,1516678604.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:45.295Z,1516678605.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:45.698Z,1516678605.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:46.078Z,1516678606.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:46.472Z,1516678606.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:46.878Z,1516678606.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:47.269Z,1516678607.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:47.682Z,1516678607.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:48.072Z,1516678608.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:48.485Z,1516678608.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:48.882Z,1516678608.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:49.278Z,1516678609.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:49.676Z,1516678609.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:50.073Z,1516678610.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:50.473Z,1516678610.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:50.871Z,1516678610.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:51.285Z,1516678611.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:51.678Z,1516678611.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:52.081Z,1516678612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:52.471Z,1516678612.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:52.882Z,1516678612.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:53.270Z,1516678613.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:53.680Z,1516678613.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:54.076Z,1516678614.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:54.482Z,1516678614.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:54.885Z,1516678614.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:55.281Z,1516678615.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:55.676Z,1516678615.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:56.075Z,1516678616.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:56.480Z,1516678616.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:56.877Z,1516678616.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:57.286Z,1516678617.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:57.692Z,1516678617.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:58.094Z,1516678618.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:58.480Z,1516678618.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:58.880Z,1516678618.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:59.281Z,1516678619.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:36:59.684Z,1516678619.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:00.081Z,1516678620.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:00.489Z,1516678620.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:00.886Z,1516678620.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:01.283Z,1516678621.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:01.678Z,1516678621.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:02.077Z,1516678622.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:02.475Z,1516678622.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:02.873Z,1516678622.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:03.286Z,1516678623.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:03.693Z,1516678623.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:04.084Z,1516678624.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:04.479Z,1516678624.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:04.884Z,1516678624.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:05.269Z,1516678625.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:05.683Z,1516678625.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:06.084Z,1516678626.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:06.489Z,1516678626.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:06.889Z,1516678626.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:07.293Z,1516678627.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:07.683Z,1516678627.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:08.083Z,1516678628.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:08.485Z,1516678628.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:08.884Z,1516678628.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:09.285Z,1516678629.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:09.692Z,1516678629.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:10.085Z,1516678630.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:10.484Z,1516678630.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:10.885Z,1516678630.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:11.262Z,1516678631.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:11.665Z,1516678631.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:12.063Z,1516678632.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:12.497Z,1516678632.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:12.897Z,1516678632.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:13.291Z,1516678633.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:13.673Z,1516678633.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:14.073Z,1516678634.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:14.471Z,1516678634.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:14.868Z,1516678634.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:15.278Z,1516678635.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:15.677Z,1516678635.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:16.074Z,1516678636.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:16.470Z,1516678636.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:16.873Z,1516678636.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:17.277Z,1516678637.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:17.671Z,1516678637.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:18.070Z,1516678638.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:18.474Z,1516678638.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:18.878Z,1516678638.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:19.305Z,1516678639.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:19.677Z,1516678639.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:20.072Z,1516678640.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:20.474Z,1516678640.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:20.870Z,1516678640.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:21.274Z,1516678641.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:21.684Z,1516678641.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:22.074Z,1516678642.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:22.471Z,1516678642.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:22.879Z,1516678642.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:23.281Z,1516678643.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:23.695Z,1516678643.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:24.086Z,1516678644.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:24.479Z,1516678644.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:24.883Z,1516678644.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:25.287Z,1516678645.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:25.688Z,1516678645.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:26.085Z,1516678646.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:26.481Z,1516678646.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:26.861Z,1516678646.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:27.285Z,1516678647.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:27.701Z,1516678647.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:28.091Z,1516678648.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:28.472Z,1516678648.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:28.869Z,1516678648.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:29.297Z,1516678649.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:29.699Z,1516678649.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:30.079Z,1516678650.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:30.470Z,1516678650.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:30.871Z,1516678650.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:31.274Z,1516678651.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:31.678Z,1516678651.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:32.099Z,1516678652.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:32.481Z,1516678652.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:32.875Z,1516678652.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:33.281Z,1516678653.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:33.682Z,1516678653.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:34.081Z,1516678654.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:34.476Z,1516678654.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:34.875Z,1516678654.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:35.281Z,1516678655.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:35.682Z,1516678655.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:36.078Z,1516678656.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:36.474Z,1516678656.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:36.872Z,1516678656.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:37.278Z,1516678657.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:37.679Z,1516678657.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:38.081Z,1516678658.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:38.477Z,1516678658.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:38.872Z,1516678658.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:39.278Z,1516678659.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:39.678Z,1516678659.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:42.779Z,1516678662.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:42.908Z,1516678662.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:43.274Z,1516678663.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:43.681Z,1516678663.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:44.076Z,1516678664.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:44.481Z,1516678664.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:44.893Z,1516678664.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:45.284Z,1516678665.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:45.681Z,1516678665.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:46.080Z,1516678666.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:46.476Z,1516678666.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:46.876Z,1516678666.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:47.293Z,1516678667.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:47.686Z,1516678667.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:48.092Z,1516678668.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:48.480Z,1516678668.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:48.876Z,1516678668.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:49.292Z,1516678669.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:49.693Z,1516678669.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:50.087Z,1516678670.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:50.478Z,1516678670.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:50.882Z,1516678670.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:51.295Z,1516678671.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:51.691Z,1516678671.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:52.091Z,1516678672.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:52.484Z,1516678672.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:52.886Z,1516678672.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:53.295Z,1516678673.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:53.693Z,1516678673.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:54.092Z,1516678674.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:54.487Z,1516678674.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:54.887Z,1516678674.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:55.291Z,1516678675.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:55.694Z,1516678675.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:56.099Z,1516678676.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:56.486Z,1516678676.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:56.889Z,1516678676.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:57.290Z,1516678677.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:57.695Z,1516678677.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:58.094Z,1516678678.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:58.493Z,1516678678.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:58.899Z,1516678678.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:59.274Z,1516678679.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:37:59.697Z,1516678679.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:00.101Z,1516678680.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:00.497Z,1516678680.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:00.873Z,1516678680.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:01.277Z,1516678681.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:01.680Z,1516678681.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:02.074Z,1516678682.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:02.482Z,1516678682.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:02.886Z,1516678682.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:03.310Z,1516678683.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:03.681Z,1516678683.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:04.080Z,1516678684.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:04.479Z,1516678684.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:04.877Z,1516678684.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:05.275Z,1516678685.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:05.684Z,1516678685.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:06.082Z,1516678686.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:06.510Z,1516678686.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:06.879Z,1516678686.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:07.278Z,1516678687.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:07.688Z,1516678687.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:08.081Z,1516678688.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:08.516Z,1516678688.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:08.889Z,1516678688.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:09.286Z,1516678689.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:09.678Z,1516678689.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:10.084Z,1516678690.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:10.480Z,1516678690.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:10.884Z,1516678690.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:11.281Z,1516678691.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:11.686Z,1516678691.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:12.086Z,1516678692.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:12.493Z,1516678692.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:12.882Z,1516678692.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:13.288Z,1516678693.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:13.680Z,1516678693.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:14.078Z,1516678694.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:14.487Z,1516678694.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:14.886Z,1516678694.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:15.287Z,1516678695.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:15.688Z,1516678695.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:16.079Z,1516678696.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:16.478Z,1516678696.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:16.893Z,1516678696.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:17.273Z,1516678697.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x45685 got:0x49152 2018-01-23T03:38:17.311Z,1516678697.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:17.697Z,1516678697.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:18.097Z,1516678698.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:18.492Z,1516678698.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:18.879Z,1516678698.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:19.279Z,1516678699.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:19.678Z,1516678699.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:20.096Z,1516678700.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:20.096Z,1516678700.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-01-23T03:38:20.096Z,1516678700.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:38:20.098Z,1516678700.098 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:20.098Z,1516678700.098 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-01-23T03:38:20.098Z,1516678700.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:38:20.100Z,1516678700.100 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:20.100Z,1516678700.100 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8 2018-01-23T03:38:20.100Z,1516678700.100 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:38:20.153Z,1516678700.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:38:20.153Z,1516678700.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:38:20.153Z,1516678700.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:38:20.538Z,1516678700.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:38:20.538Z,1516678700.538 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-01-23T03:38:20.539Z,1516678700.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:38:20.539Z,1516678700.539 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-01-23T03:38:20.539Z,1516678700.539 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:38:20.539Z,1516678700.539 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8 2018-01-23T03:38:20.889Z,1516678700.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:38:20.890Z,1516678700.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:38:20.890Z,1516678700.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:38:20.890Z,1516678700.890 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:38:20.892Z,1516678700.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:38:20.892Z,1516678700.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:38:20.892Z,1516678700.892 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:38:20.893Z,1516678700.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:38:20.893Z,1516678700.893 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:38:21.297Z,1516678701.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:38:21.298Z,1516678701.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:21.696Z,1516678701.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:38:21.697Z,1516678701.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:22.088Z,1516678702.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:38:22.089Z,1516678702.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:22.483Z,1516678702.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:38:22.484Z,1516678702.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:22.887Z,1516678702.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:38:22.887Z,1516678702.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:23.289Z,1516678703.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:38:23.290Z,1516678703.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:23.692Z,1516678703.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:38:23.693Z,1516678703.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:24.092Z,1516678704.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:38:24.093Z,1516678704.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:24.492Z,1516678704.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:38:24.493Z,1516678704.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:24.892Z,1516678704.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:38:24.893Z,1516678704.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:25.291Z,1516678705.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:38:25.292Z,1516678705.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:25.687Z,1516678705.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:38:25.688Z,1516678705.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:26.082Z,1516678706.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:38:26.087Z,1516678706.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:26.491Z,1516678706.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:38:26.492Z,1516678706.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:26.899Z,1516678706.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:38:26.900Z,1516678706.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:27.297Z,1516678707.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:38:27.298Z,1516678707.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:27.693Z,1516678707.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:38:27.694Z,1516678707.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:28.096Z,1516678708.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:38:28.097Z,1516678708.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:28.493Z,1516678708.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:38:28.494Z,1516678708.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:28.903Z,1516678708.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:38:28.904Z,1516678708.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:29.270Z,1516678709.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:38:29.271Z,1516678709.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:29.700Z,1516678709.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:38:29.701Z,1516678709.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:30.108Z,1516678710.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:38:30.109Z,1516678710.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:30.500Z,1516678710.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:38:30.501Z,1516678710.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:30.882Z,1516678710.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:38:30.899Z,1516678710.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:31.284Z,1516678711.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:38:31.285Z,1516678711.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:31.678Z,1516678711.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:38:31.680Z,1516678711.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:32.078Z,1516678712.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:38:32.080Z,1516678712.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:32.480Z,1516678712.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:38:32.481Z,1516678712.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:32.905Z,1516678712.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:38:32.906Z,1516678712.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:33.277Z,1516678713.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:38:33.278Z,1516678713.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:33.684Z,1516678713.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:38:33.685Z,1516678713.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:34.078Z,1516678714.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:38:34.079Z,1516678714.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:34.474Z,1516678714.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:38:34.475Z,1516678714.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:34.893Z,1516678714.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:38:34.893Z,1516678714.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:35.290Z,1516678715.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:38:35.295Z,1516678715.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:35.693Z,1516678715.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:38:35.694Z,1516678715.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:36.105Z,1516678716.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:38:36.106Z,1516678716.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:36.493Z,1516678716.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:38:36.495Z,1516678716.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:36.877Z,1516678716.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:38:36.879Z,1516678716.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:37.287Z,1516678717.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:38:37.288Z,1516678717.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:37.682Z,1516678717.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:38:37.684Z,1516678717.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:38.083Z,1516678718.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:38:38.084Z,1516678718.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:38.491Z,1516678718.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:38:38.492Z,1516678718.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:38.495Z,1516678718.495 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T03:38:38.495Z,1516678718.495 [Default:CheckIn:C.Wait] Stopped 2018-01-23T03:38:38.495Z,1516678718.495 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T03:38:38.495Z,1516678718.495 [Default:CheckIn:D] Running Loop=1 2018-01-23T03:38:38.892Z,1516678718.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:38:38.893Z,1516678718.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:38.897Z,1516678718.897 [Default:CheckIn:D] Stopped 2018-01-23T03:38:38.897Z,1516678718.897 [Default:CheckIn:E] Running Loop=1 2018-01-23T03:38:39.302Z,1516678719.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:38:39.304Z,1516678719.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:39.309Z,1516678719.309 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.780613 min 2018-01-23T03:38:39.309Z,1516678719.309 [Default:CheckIn:E] Stopped 2018-01-23T03:38:39.309Z,1516678719.309 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T03:38:39.309Z,1516678719.309 [Default:CheckIn] Stopped 2018-01-23T03:38:39.309Z,1516678719.309 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T03:38:39.310Z,1516678719.310 [Default:CheckIn](INFO): Running loop #3 2018-01-23T03:38:39.310Z,1516678719.310 [Default:CheckIn] Running Loop=3 2018-01-23T03:38:39.310Z,1516678719.310 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T03:38:39.310Z,1516678719.310 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T03:38:39.683Z,1516678719.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:38:39.684Z,1516678719.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:42.782Z,1516678722.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:42.917Z,1516678722.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:43.257Z,1516678723.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:43.658Z,1516678723.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:44.061Z,1516678724.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:44.450Z,1516678724.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:44.848Z,1516678724.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:45.248Z,1516678725.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:45.665Z,1516678725.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:46.061Z,1516678726.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:46.457Z,1516678726.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:46.850Z,1516678726.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:47.256Z,1516678727.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:47.650Z,1516678727.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:48.049Z,1516678728.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:48.459Z,1516678728.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:48.862Z,1516678728.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:49.257Z,1516678729.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:49.683Z,1516678729.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:50.051Z,1516678730.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:50.449Z,1516678730.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:50.849Z,1516678730.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:51.249Z,1516678731.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:51.665Z,1516678731.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:52.063Z,1516678732.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:52.468Z,1516678732.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:52.854Z,1516678732.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:53.253Z,1516678733.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:53.657Z,1516678733.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:54.049Z,1516678734.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:54.465Z,1516678734.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:54.862Z,1516678734.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:55.269Z,1516678735.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:55.650Z,1516678735.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:56.056Z,1516678736.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:56.453Z,1516678736.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:56.859Z,1516678736.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:57.255Z,1516678737.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:57.668Z,1516678737.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:58.061Z,1516678738.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:58.458Z,1516678738.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:58.855Z,1516678738.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:59.250Z,1516678739.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:38:59.655Z,1516678739.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:00.055Z,1516678740.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:00.472Z,1516678740.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:00.859Z,1516678740.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:01.268Z,1516678741.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:01.650Z,1516678741.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:02.055Z,1516678742.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:02.449Z,1516678742.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:02.859Z,1516678742.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:03.249Z,1516678743.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:03.668Z,1516678743.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:04.062Z,1516678744.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:04.460Z,1516678744.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:04.863Z,1516678744.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:05.261Z,1516678745.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:05.655Z,1516678745.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:06.057Z,1516678746.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:06.466Z,1516678746.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:06.868Z,1516678746.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:07.269Z,1516678747.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:07.661Z,1516678747.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:08.037Z,1516678748.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:08.461Z,1516678748.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:08.840Z,1516678748.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:09.241Z,1516678749.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:09.669Z,1516678749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:10.075Z,1516678750.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:10.454Z,1516678750.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:10.853Z,1516678750.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:11.248Z,1516678751.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:11.647Z,1516678751.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:12.053Z,1516678752.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:12.454Z,1516678752.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:12.857Z,1516678752.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:13.257Z,1516678753.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:13.652Z,1516678753.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:14.046Z,1516678754.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:14.457Z,1516678754.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:14.856Z,1516678754.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:15.257Z,1516678755.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:15.648Z,1516678755.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:16.047Z,1516678756.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:16.457Z,1516678756.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:16.854Z,1516678756.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:17.253Z,1516678757.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:17.650Z,1516678757.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:18.048Z,1516678758.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:18.454Z,1516678758.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:18.854Z,1516678758.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:19.266Z,1516678759.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:19.653Z,1516678759.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:20.048Z,1516678760.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:20.455Z,1516678760.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:20.857Z,1516678760.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:21.248Z,1516678761.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:21.681Z,1516678761.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:22.064Z,1516678762.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:22.457Z,1516678762.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:22.848Z,1516678762.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:23.247Z,1516678763.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:23.649Z,1516678763.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:24.048Z,1516678764.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:24.456Z,1516678764.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:24.861Z,1516678764.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:25.261Z,1516678765.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:25.653Z,1516678765.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:26.047Z,1516678766.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:26.465Z,1516678766.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:26.860Z,1516678766.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:27.257Z,1516678767.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:27.650Z,1516678767.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:28.057Z,1516678768.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:28.465Z,1516678768.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:28.865Z,1516678768.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:29.259Z,1516678769.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:29.656Z,1516678769.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:30.057Z,1516678770.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:30.459Z,1516678770.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:30.861Z,1516678770.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:31.264Z,1516678771.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:31.661Z,1516678771.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:32.060Z,1516678772.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:32.468Z,1516678772.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:32.869Z,1516678772.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:33.269Z,1516678773.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:33.660Z,1516678773.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:34.067Z,1516678774.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:34.469Z,1516678774.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:34.872Z,1516678774.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:35.265Z,1516678775.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:35.660Z,1516678775.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:36.045Z,1516678776.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:36.472Z,1516678776.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:36.870Z,1516678776.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:37.277Z,1516678777.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:37.652Z,1516678777.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:38.041Z,1516678778.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:38.474Z,1516678778.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:38.879Z,1516678778.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:39.250Z,1516678779.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:39.678Z,1516678779.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:40.048Z,1516678780.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:43.189Z,1516678783.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:43.349Z,1516678783.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:43.682Z,1516678783.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:44.059Z,1516678784.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:44.461Z,1516678784.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:44.854Z,1516678784.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:45.264Z,1516678785.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:45.683Z,1516678785.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:46.066Z,1516678786.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:46.464Z,1516678786.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:46.854Z,1516678786.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:47.258Z,1516678787.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:47.660Z,1516678787.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:48.061Z,1516678788.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:48.463Z,1516678788.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:48.868Z,1516678788.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:49.265Z,1516678789.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:49.665Z,1516678789.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:50.059Z,1516678790.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:50.465Z,1516678790.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:50.866Z,1516678790.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:51.261Z,1516678791.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:51.663Z,1516678791.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:52.055Z,1516678792.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:52.472Z,1516678792.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:52.865Z,1516678792.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:53.265Z,1516678793.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:53.665Z,1516678793.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:54.054Z,1516678794.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:54.472Z,1516678794.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:54.864Z,1516678794.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:55.265Z,1516678795.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:55.657Z,1516678795.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:56.066Z,1516678796.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:56.455Z,1516678796.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:56.869Z,1516678796.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:57.265Z,1516678797.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:57.673Z,1516678797.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:58.059Z,1516678798.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:58.464Z,1516678798.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:58.857Z,1516678798.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:59.258Z,1516678799.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:39:59.668Z,1516678799.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:00.066Z,1516678800.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:00.466Z,1516678800.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:00.864Z,1516678800.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:01.256Z,1516678801.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:01.662Z,1516678801.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:02.069Z,1516678802.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:02.445Z,1516678802.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:02.870Z,1516678802.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:03.281Z,1516678803.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:03.668Z,1516678803.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:04.073Z,1516678804.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:04.451Z,1516678804.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:04.852Z,1516678804.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:05.281Z,1516678805.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:05.685Z,1516678805.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:06.062Z,1516678806.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:06.462Z,1516678806.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:06.855Z,1516678806.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:07.253Z,1516678807.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:07.660Z,1516678807.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:08.056Z,1516678808.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:08.455Z,1516678808.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:08.858Z,1516678808.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:09.287Z,1516678809.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:09.683Z,1516678809.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:10.061Z,1516678810.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:10.456Z,1516678810.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:10.865Z,1516678810.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:11.259Z,1516678811.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:11.662Z,1516678811.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:12.062Z,1516678812.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:12.462Z,1516678812.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:12.856Z,1516678812.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:13.256Z,1516678813.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:13.661Z,1516678813.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:14.060Z,1516678814.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:14.454Z,1516678814.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:14.861Z,1516678814.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:15.262Z,1516678815.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:15.667Z,1516678815.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:16.061Z,1516678816.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:16.456Z,1516678816.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:16.857Z,1516678816.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:17.254Z,1516678817.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:17.661Z,1516678817.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:18.062Z,1516678818.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:18.465Z,1516678818.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:18.856Z,1516678818.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:19.255Z,1516678819.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:19.661Z,1516678819.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:20.056Z,1516678820.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:20.454Z,1516678820.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:20.865Z,1516678820.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:21.266Z,1516678821.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:21.663Z,1516678821.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:22.055Z,1516678822.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:22.460Z,1516678822.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:22.857Z,1516678822.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:23.255Z,1516678823.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:23.687Z,1516678823.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:24.061Z,1516678824.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:24.462Z,1516678824.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:24.857Z,1516678824.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:25.258Z,1516678825.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:25.665Z,1516678825.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:26.057Z,1516678826.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:26.456Z,1516678826.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:26.877Z,1516678826.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:27.269Z,1516678827.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:27.670Z,1516678827.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:28.059Z,1516678828.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:28.467Z,1516678828.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:28.858Z,1516678828.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:29.266Z,1516678829.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:29.667Z,1516678829.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:30.065Z,1516678830.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:30.465Z,1516678830.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:30.860Z,1516678830.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:31.257Z,1516678831.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:31.669Z,1516678831.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:32.063Z,1516678832.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:32.453Z,1516678832.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:32.866Z,1516678832.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:33.270Z,1516678833.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:33.668Z,1516678833.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:34.067Z,1516678834.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:34.464Z,1516678834.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:34.864Z,1516678834.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:35.273Z,1516678835.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:35.674Z,1516678835.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:36.074Z,1516678836.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:36.477Z,1516678836.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:36.881Z,1516678836.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:37.249Z,1516678837.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:37.679Z,1516678837.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:38.054Z,1516678838.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:38.448Z,1516678838.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:38.880Z,1516678838.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:39.282Z,1516678839.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:39.684Z,1516678839.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:40.054Z,1516678840.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:43.162Z,1516678843.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:43.309Z,1516678843.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:43.684Z,1516678843.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:44.090Z,1516678844.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:44.486Z,1516678844.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:44.886Z,1516678844.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:45.288Z,1516678845.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:45.685Z,1516678845.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:46.085Z,1516678846.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:46.469Z,1516678846.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:46.887Z,1516678846.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:47.287Z,1516678847.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:47.688Z,1516678847.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:48.089Z,1516678848.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:48.464Z,1516678848.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:48.861Z,1516678848.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:49.267Z,1516678849.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:49.699Z,1516678849.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:50.070Z,1516678850.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:50.470Z,1516678850.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:50.866Z,1516678850.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:51.269Z,1516678851.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:51.664Z,1516678851.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:52.067Z,1516678852.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:52.465Z,1516678852.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:52.874Z,1516678852.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:53.285Z,1516678853.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:53.679Z,1516678853.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:54.065Z,1516678854.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:54.472Z,1516678854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:54.864Z,1516678854.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:55.274Z,1516678855.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:55.674Z,1516678855.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:56.081Z,1516678856.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:56.477Z,1516678856.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:56.867Z,1516678856.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:57.269Z,1516678857.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:57.665Z,1516678857.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:58.065Z,1516678858.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:58.476Z,1516678858.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:58.881Z,1516678858.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:59.281Z,1516678859.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:40:59.674Z,1516678859.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:00.073Z,1516678860.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:00.466Z,1516678860.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:00.869Z,1516678860.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:01.273Z,1516678861.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:01.673Z,1516678861.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:02.081Z,1516678862.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:02.481Z,1516678862.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:02.865Z,1516678862.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:03.264Z,1516678863.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:03.666Z,1516678863.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:04.066Z,1516678864.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:04.469Z,1516678864.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:04.874Z,1516678864.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:05.278Z,1516678865.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:05.674Z,1516678865.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:06.068Z,1516678866.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:06.466Z,1516678866.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:06.872Z,1516678866.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:07.273Z,1516678867.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:07.674Z,1516678867.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:08.081Z,1516678868.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:08.474Z,1516678868.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:08.877Z,1516678868.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:09.273Z,1516678869.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:09.665Z,1516678869.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:10.065Z,1516678870.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:10.465Z,1516678870.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:10.874Z,1516678870.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:11.277Z,1516678871.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:11.680Z,1516678871.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:12.062Z,1516678872.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:12.473Z,1516678872.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:12.864Z,1516678872.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:13.265Z,1516678873.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:13.680Z,1516678873.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:14.081Z,1516678874.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:14.478Z,1516678874.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:14.871Z,1516678874.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:15.266Z,1516678875.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:15.677Z,1516678875.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:16.070Z,1516678876.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:16.472Z,1516678876.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:16.879Z,1516678876.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:17.282Z,1516678877.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:17.675Z,1516678877.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:18.072Z,1516678878.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:18.465Z,1516678878.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:18.873Z,1516678878.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:19.269Z,1516678879.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:19.677Z,1516678879.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:20.081Z,1516678880.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:20.536Z,1516678880.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:20.877Z,1516678880.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:21.266Z,1516678881.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:21.266Z,1516678881.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-01-23T03:41:21.266Z,1516678881.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:41:21.268Z,1516678881.268 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:21.268Z,1516678881.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-01-23T03:41:21.268Z,1516678881.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:41:21.270Z,1516678881.270 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:21.270Z,1516678881.270 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9 2018-01-23T03:41:21.270Z,1516678881.270 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:41:21.282Z,1516678881.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:41:21.282Z,1516678881.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:41:21.282Z,1516678881.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:41:21.682Z,1516678881.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:41:21.682Z,1516678881.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-01-23T03:41:21.683Z,1516678881.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:41:21.683Z,1516678881.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-01-23T03:41:21.683Z,1516678881.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:41:21.683Z,1516678881.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9 2018-01-23T03:41:22.075Z,1516678882.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:41:22.075Z,1516678882.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:41:22.076Z,1516678882.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:41:22.076Z,1516678882.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:41:22.076Z,1516678882.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:41:22.077Z,1516678882.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:41:22.077Z,1516678882.077 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:41:22.077Z,1516678882.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:41:22.078Z,1516678882.078 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:41:22.477Z,1516678882.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:41:22.477Z,1516678882.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:22.878Z,1516678882.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:41:22.879Z,1516678882.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:23.281Z,1516678883.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:41:23.282Z,1516678883.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:23.676Z,1516678883.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:41:23.677Z,1516678883.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:24.074Z,1516678884.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:41:24.076Z,1516678884.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:24.474Z,1516678884.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:41:24.476Z,1516678884.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:24.876Z,1516678884.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:41:24.877Z,1516678884.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:25.274Z,1516678885.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:41:25.276Z,1516678885.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:25.683Z,1516678885.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:41:25.684Z,1516678885.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:26.089Z,1516678886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:41:26.089Z,1516678886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:26.476Z,1516678886.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:41:26.477Z,1516678886.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:26.876Z,1516678886.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:41:26.877Z,1516678886.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:27.258Z,1516678887.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:41:27.259Z,1516678887.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:27.653Z,1516678887.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:41:27.654Z,1516678887.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:28.063Z,1516678888.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:41:28.064Z,1516678888.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:28.460Z,1516678888.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:41:28.461Z,1516678888.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:28.869Z,1516678888.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:41:28.870Z,1516678888.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:29.273Z,1516678889.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:41:29.274Z,1516678889.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:29.696Z,1516678889.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:41:29.697Z,1516678889.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:30.061Z,1516678890.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:41:30.062Z,1516678890.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:30.465Z,1516678890.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:41:30.466Z,1516678890.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:30.866Z,1516678890.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:41:30.867Z,1516678890.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:31.265Z,1516678891.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:41:31.266Z,1516678891.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:31.695Z,1516678891.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:41:31.696Z,1516678891.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:32.073Z,1516678892.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:41:32.074Z,1516678892.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:32.484Z,1516678892.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:41:32.485Z,1516678892.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:32.868Z,1516678892.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:41:32.869Z,1516678892.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:33.269Z,1516678893.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:41:33.270Z,1516678893.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:33.677Z,1516678893.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:41:33.678Z,1516678893.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:34.081Z,1516678894.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:41:34.082Z,1516678894.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:34.473Z,1516678894.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:41:34.474Z,1516678894.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:34.865Z,1516678894.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:41:34.866Z,1516678894.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:35.265Z,1516678895.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:41:35.266Z,1516678895.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:35.674Z,1516678895.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:41:35.675Z,1516678895.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:36.077Z,1516678896.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:41:36.078Z,1516678896.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:36.480Z,1516678896.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:41:36.481Z,1516678896.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:36.867Z,1516678896.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:41:36.868Z,1516678896.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:37.267Z,1516678897.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:41:37.268Z,1516678897.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:37.666Z,1516678897.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:41:37.667Z,1516678897.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:38.064Z,1516678898.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:41:38.065Z,1516678898.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:38.467Z,1516678898.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:41:38.468Z,1516678898.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:38.873Z,1516678898.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:41:38.874Z,1516678898.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:39.280Z,1516678899.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:41:39.281Z,1516678899.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:39.684Z,1516678899.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:41:39.685Z,1516678899.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:40.072Z,1516678900.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:41:40.073Z,1516678900.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:43.171Z,1516678903.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:43.285Z,1516678903.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:43.660Z,1516678903.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:44.064Z,1516678904.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:44.459Z,1516678904.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:44.841Z,1516678904.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:45.240Z,1516678905.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:45.669Z,1516678905.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:46.043Z,1516678906.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:46.445Z,1516678906.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:46.837Z,1516678906.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:47.240Z,1516678907.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:47.638Z,1516678907.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:48.038Z,1516678908.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:48.442Z,1516678908.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:48.840Z,1516678908.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:49.232Z,1516678909.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:49.638Z,1516678909.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:50.044Z,1516678910.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:50.438Z,1516678910.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:50.834Z,1516678910.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:51.235Z,1516678911.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:51.657Z,1516678911.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:52.053Z,1516678912.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:52.452Z,1516678912.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:52.833Z,1516678912.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:53.245Z,1516678913.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:53.642Z,1516678913.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:54.051Z,1516678914.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:54.448Z,1516678914.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:54.847Z,1516678914.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:55.238Z,1516678915.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:55.648Z,1516678915.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:56.037Z,1516678916.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:56.440Z,1516678916.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:56.850Z,1516678916.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:57.249Z,1516678917.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:57.650Z,1516678917.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:58.045Z,1516678918.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:58.437Z,1516678918.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:58.838Z,1516678918.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:59.241Z,1516678919.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:41:59.638Z,1516678919.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:00.053Z,1516678920.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:00.457Z,1516678920.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:00.860Z,1516678920.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:01.243Z,1516678921.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:01.647Z,1516678921.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:02.041Z,1516678922.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:02.448Z,1516678922.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:02.865Z,1516678922.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:03.254Z,1516678923.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:03.652Z,1516678923.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:04.050Z,1516678924.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:04.446Z,1516678924.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:04.822Z,1516678924.822 [PNI_TCM](ERROR): CRC does not match. Expected:0x54621 got:0x63515 2018-01-23T03:42:04.846Z,1516678924.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:05.244Z,1516678925.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:05.649Z,1516678925.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:06.062Z,1516678926.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:06.456Z,1516678926.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:06.850Z,1516678926.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:07.249Z,1516678927.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:07.656Z,1516678927.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:08.049Z,1516678928.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:08.436Z,1516678928.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:08.861Z,1516678928.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:09.256Z,1516678929.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:09.654Z,1516678929.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:10.029Z,1516678930.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:10.429Z,1516678930.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:10.856Z,1516678930.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:11.258Z,1516678931.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:11.633Z,1516678931.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:12.042Z,1516678932.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:12.457Z,1516678932.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:12.848Z,1516678932.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:13.237Z,1516678933.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:13.638Z,1516678933.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:14.049Z,1516678934.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:14.429Z,1516678934.429 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T03:42:14.470Z,1516678934.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:14.835Z,1516678934.835 [PNI_TCM](ERROR): CRC does not match. Expected:0x30747 got:0x7618 2018-01-23T03:42:14.870Z,1516678934.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:15.248Z,1516678935.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:15.665Z,1516678935.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:16.029Z,1516678936.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T03:42:16.072Z,1516678936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:16.431Z,1516678936.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x61200 got:0x36626 2018-01-23T03:42:16.449Z,1516678936.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:16.837Z,1516678936.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:17.266Z,1516678937.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:17.643Z,1516678937.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:18.051Z,1516678938.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:18.457Z,1516678938.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:18.872Z,1516678938.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:19.253Z,1516678939.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:19.649Z,1516678939.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:20.044Z,1516678940.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:20.455Z,1516678940.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:20.852Z,1516678940.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:21.251Z,1516678941.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:21.653Z,1516678941.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:22.056Z,1516678942.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:22.445Z,1516678942.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:22.840Z,1516678942.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:23.243Z,1516678943.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:23.641Z,1516678943.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:24.050Z,1516678944.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:24.452Z,1516678944.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:24.849Z,1516678944.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:25.256Z,1516678945.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:25.644Z,1516678945.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:26.051Z,1516678946.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:26.438Z,1516678946.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:26.845Z,1516678946.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:27.258Z,1516678947.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:27.653Z,1516678947.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:28.042Z,1516678948.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:28.472Z,1516678948.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:28.835Z,1516678948.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:29.240Z,1516678949.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:29.656Z,1516678949.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:30.049Z,1516678950.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:30.453Z,1516678950.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:30.859Z,1516678950.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:31.249Z,1516678951.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:31.656Z,1516678951.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:32.049Z,1516678952.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:32.425Z,1516678952.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:32.860Z,1516678952.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:33.272Z,1516678953.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:33.664Z,1516678953.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:34.055Z,1516678954.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:34.434Z,1516678954.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:34.829Z,1516678954.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:35.240Z,1516678955.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:35.641Z,1516678955.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:36.040Z,1516678956.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:36.442Z,1516678956.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:36.838Z,1516678956.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:37.234Z,1516678957.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:37.634Z,1516678957.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:38.044Z,1516678958.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:38.436Z,1516678958.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:38.838Z,1516678958.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:39.243Z,1516678959.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:39.645Z,1516678959.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:40.041Z,1516678960.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:40.442Z,1516678960.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:43.542Z,1516678963.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:43.681Z,1516678963.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:44.037Z,1516678964.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:44.443Z,1516678964.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:44.838Z,1516678964.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:45.229Z,1516678965.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:45.641Z,1516678965.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:46.031Z,1516678966.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:46.433Z,1516678966.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:46.840Z,1516678966.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:47.249Z,1516678967.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:47.638Z,1516678967.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:48.036Z,1516678968.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:48.413Z,1516678968.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:48.815Z,1516678968.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:49.220Z,1516678969.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:49.641Z,1516678969.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:50.045Z,1516678970.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:50.447Z,1516678970.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:50.846Z,1516678970.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:51.229Z,1516678971.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:51.623Z,1516678971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:52.021Z,1516678972.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:52.429Z,1516678972.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:52.854Z,1516678972.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:53.226Z,1516678973.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:53.630Z,1516678973.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:54.032Z,1516678974.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:54.420Z,1516678974.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:54.818Z,1516678974.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:55.224Z,1516678975.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:55.622Z,1516678975.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:56.034Z,1516678976.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:56.433Z,1516678976.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:56.841Z,1516678976.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:57.226Z,1516678977.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:57.629Z,1516678977.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:58.029Z,1516678978.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:58.432Z,1516678978.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:58.839Z,1516678978.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:59.238Z,1516678979.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:42:59.638Z,1516678979.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:00.027Z,1516678980.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:00.426Z,1516678980.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:00.839Z,1516678980.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:01.229Z,1516678981.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:01.626Z,1516678981.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:02.044Z,1516678982.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:02.443Z,1516678982.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:02.836Z,1516678982.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:03.229Z,1516678983.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:03.635Z,1516678983.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:04.029Z,1516678984.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:04.431Z,1516678984.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:04.834Z,1516678984.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:05.235Z,1516678985.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:05.644Z,1516678985.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:06.036Z,1516678986.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:06.431Z,1516678986.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:06.832Z,1516678986.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:07.241Z,1516678987.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:07.625Z,1516678987.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:08.044Z,1516678988.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:08.445Z,1516678988.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:08.834Z,1516678988.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:09.232Z,1516678989.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:09.637Z,1516678989.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:10.029Z,1516678990.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:10.417Z,1516678990.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:10.845Z,1516678990.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:11.239Z,1516678991.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:11.645Z,1516678991.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:12.049Z,1516678992.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:12.419Z,1516678992.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:12.849Z,1516678992.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:13.225Z,1516678993.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:13.629Z,1516678993.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:14.030Z,1516678994.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:14.430Z,1516678994.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:14.833Z,1516678994.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:15.226Z,1516678995.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:15.626Z,1516678995.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:16.025Z,1516678996.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:16.428Z,1516678996.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:16.829Z,1516678996.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:17.230Z,1516678997.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:17.633Z,1516678997.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:18.025Z,1516678998.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:18.422Z,1516678998.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:18.842Z,1516678998.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:19.234Z,1516678999.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:19.633Z,1516678999.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:20.027Z,1516679000.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:20.430Z,1516679000.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:20.835Z,1516679000.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:21.248Z,1516679001.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:21.636Z,1516679001.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:22.027Z,1516679002.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:22.433Z,1516679002.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:22.847Z,1516679002.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:23.239Z,1516679003.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:23.647Z,1516679003.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:24.029Z,1516679004.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:24.426Z,1516679004.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:24.843Z,1516679004.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:25.240Z,1516679005.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:25.636Z,1516679005.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:26.032Z,1516679006.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:26.435Z,1516679006.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:26.842Z,1516679006.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:27.246Z,1516679007.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:27.634Z,1516679007.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:28.032Z,1516679008.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:28.429Z,1516679008.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:28.834Z,1516679008.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:29.239Z,1516679009.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:29.636Z,1516679009.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:30.035Z,1516679010.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:30.433Z,1516679010.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:30.834Z,1516679010.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:31.238Z,1516679011.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:31.635Z,1516679011.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:32.031Z,1516679012.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:32.432Z,1516679012.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:32.838Z,1516679012.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:33.238Z,1516679013.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:33.641Z,1516679013.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:34.030Z,1516679014.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:34.429Z,1516679014.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:34.837Z,1516679014.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:35.242Z,1516679015.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:35.642Z,1516679015.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:36.032Z,1516679016.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:36.430Z,1516679016.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:36.837Z,1516679016.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:37.239Z,1516679017.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:37.636Z,1516679017.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:38.035Z,1516679018.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:38.433Z,1516679018.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:38.840Z,1516679018.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:39.241Z,1516679019.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:39.645Z,1516679019.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:39.648Z,1516679019.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T03:38:39.3Z 2018-01-23T03:43:39.648Z,1516679019.648 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T03:43:39.648Z,1516679019.648 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T03:43:40.032Z,1516679020.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:40.553Z,1516679020.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:40.845Z,1516679020.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:43.943Z,1516679023.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:44.039Z,1516679024.039 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0012.lzma 2018-01-23T03:43:44.134Z,1516679024.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:44.432Z,1516679024.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:44.765Z,1516679024.765 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0012.lzma.bak 2018-01-23T03:43:44.765Z,1516679024.765 [DataOverHttps](INFO): SBD MOMSN=7754938 2018-01-23T03:43:44.837Z,1516679024.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:45.437Z,1516679025.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:45.633Z,1516679025.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:48.718Z,1516679028.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:48.879Z,1516679028.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:49.215Z,1516679029.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:49.617Z,1516679029.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:50.008Z,1516679030.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:50.413Z,1516679030.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:53.505Z,1516679033.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:53.586Z,1516679033.586 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0013.lzma 2018-01-23T03:43:53.680Z,1516679033.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:53.996Z,1516679033.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:54.337Z,1516679034.337 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0013.lzma.bak 2018-01-23T03:43:54.337Z,1516679034.337 [DataOverHttps](INFO): SBD MOMSN=7754940 2018-01-23T03:43:54.409Z,1516679034.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:55.005Z,1516679035.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:55.008Z,1516679035.008 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T03:43:55.008Z,1516679035.008 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T03:43:55.008Z,1516679035.008 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T03:43:55.189Z,1516679035.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:58.305Z,1516679038.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:58.449Z,1516679038.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:58.797Z,1516679038.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:59.195Z,1516679039.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:59.581Z,1516679039.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:43:59.997Z,1516679039.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:00.373Z,1516679040.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:00.771Z,1516679040.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:01.178Z,1516679041.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:01.577Z,1516679041.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:01.974Z,1516679041.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:02.370Z,1516679042.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:02.776Z,1516679042.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:03.203Z,1516679043.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:03.577Z,1516679043.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:03.978Z,1516679043.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:04.382Z,1516679044.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:04.781Z,1516679044.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:05.175Z,1516679045.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:05.575Z,1516679045.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:05.977Z,1516679045.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:06.372Z,1516679046.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:06.775Z,1516679046.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:07.181Z,1516679047.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:07.581Z,1516679047.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:07.981Z,1516679047.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:08.371Z,1516679048.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:08.771Z,1516679048.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:09.173Z,1516679049.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:09.571Z,1516679049.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:09.978Z,1516679049.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:10.378Z,1516679050.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:10.778Z,1516679050.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:11.173Z,1516679051.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:11.186Z,1516679051.186 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T03:44:11.572Z,1516679051.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:11.984Z,1516679051.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:12.376Z,1516679052.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:12.776Z,1516679052.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:13.185Z,1516679053.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:13.578Z,1516679053.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:13.981Z,1516679053.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:14.375Z,1516679054.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:14.771Z,1516679054.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:15.173Z,1516679055.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:15.570Z,1516679055.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:15.984Z,1516679055.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:16.378Z,1516679056.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:16.777Z,1516679056.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:17.172Z,1516679057.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:17.571Z,1516679057.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:17.971Z,1516679057.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:18.372Z,1516679058.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:18.771Z,1516679058.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:19.181Z,1516679059.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:19.576Z,1516679059.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:19.978Z,1516679059.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:20.371Z,1516679060.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:20.772Z,1516679060.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:21.185Z,1516679061.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:21.575Z,1516679061.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:21.977Z,1516679061.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:22.379Z,1516679062.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:22.379Z,1516679062.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-01-23T03:44:22.379Z,1516679062.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:44:22.381Z,1516679062.381 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:22.381Z,1516679062.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-01-23T03:44:22.381Z,1516679062.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:44:22.383Z,1516679062.383 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:22.383Z,1516679062.383 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10 2018-01-23T03:44:22.383Z,1516679062.383 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:44:22.411Z,1516679062.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:44:22.411Z,1516679062.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:44:22.411Z,1516679062.411 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:44:22.791Z,1516679062.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:44:22.791Z,1516679062.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-01-23T03:44:22.792Z,1516679062.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:44:22.792Z,1516679062.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-01-23T03:44:22.792Z,1516679062.792 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:44:22.792Z,1516679062.792 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10 2018-01-23T03:44:23.172Z,1516679063.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:44:23.172Z,1516679063.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:44:23.173Z,1516679063.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:44:23.173Z,1516679063.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:44:23.174Z,1516679063.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:44:23.174Z,1516679063.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:44:23.174Z,1516679063.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:44:23.175Z,1516679063.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:44:23.175Z,1516679063.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:44:23.579Z,1516679063.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:44:23.580Z,1516679063.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:23.980Z,1516679063.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:44:23.981Z,1516679063.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:24.376Z,1516679064.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:44:24.377Z,1516679064.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:24.777Z,1516679064.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:44:24.778Z,1516679064.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:25.182Z,1516679065.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:44:25.183Z,1516679065.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:25.586Z,1516679065.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:44:25.587Z,1516679065.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:25.981Z,1516679065.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:44:25.982Z,1516679065.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:26.380Z,1516679066.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:44:26.381Z,1516679066.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:26.773Z,1516679066.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:44:26.774Z,1516679066.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:27.173Z,1516679067.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:44:27.174Z,1516679067.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:27.579Z,1516679067.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:44:27.580Z,1516679067.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:27.981Z,1516679067.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:44:27.982Z,1516679067.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:28.385Z,1516679068.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:44:28.386Z,1516679068.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:28.785Z,1516679068.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:44:28.786Z,1516679068.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:29.173Z,1516679069.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:44:29.174Z,1516679069.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:29.580Z,1516679069.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:44:29.581Z,1516679069.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:29.976Z,1516679069.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:44:29.977Z,1516679069.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:30.380Z,1516679070.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:44:30.381Z,1516679070.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:30.780Z,1516679070.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:44:30.781Z,1516679070.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:31.181Z,1516679071.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:44:31.182Z,1516679071.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:31.592Z,1516679071.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:44:31.593Z,1516679071.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:31.994Z,1516679071.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:44:31.995Z,1516679071.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:32.376Z,1516679072.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:44:32.377Z,1516679072.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:32.764Z,1516679072.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:44:32.765Z,1516679072.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:33.165Z,1516679073.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:44:33.166Z,1516679073.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:33.564Z,1516679073.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:44:33.565Z,1516679073.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:33.977Z,1516679073.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:44:33.978Z,1516679073.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:34.377Z,1516679074.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:44:34.378Z,1516679074.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:34.792Z,1516679074.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:44:34.793Z,1516679074.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:35.168Z,1516679075.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:44:35.169Z,1516679075.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:35.565Z,1516679075.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:44:35.566Z,1516679075.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:35.967Z,1516679075.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:44:35.968Z,1516679075.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:36.366Z,1516679076.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:44:36.367Z,1516679076.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:36.768Z,1516679076.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:44:36.769Z,1516679076.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:37.178Z,1516679077.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:44:37.179Z,1516679077.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:37.617Z,1516679077.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:44:37.618Z,1516679077.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:37.978Z,1516679077.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:44:37.983Z,1516679077.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:38.388Z,1516679078.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:44:38.389Z,1516679078.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:38.776Z,1516679078.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:44:38.777Z,1516679078.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:39.176Z,1516679079.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:44:39.177Z,1516679079.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:39.570Z,1516679079.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:44:39.572Z,1516679079.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:39.982Z,1516679079.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:44:39.983Z,1516679079.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:40.385Z,1516679080.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:44:40.386Z,1516679080.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:40.785Z,1516679080.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:44:40.786Z,1516679080.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:41.171Z,1516679081.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:44:41.172Z,1516679081.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:41.573Z,1516679081.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:44:41.574Z,1516679081.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:41.970Z,1516679081.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:44:41.971Z,1516679081.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:42.372Z,1516679082.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T03:44:42.373Z,1516679082.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:42.771Z,1516679082.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:43.189Z,1516679083.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:43.585Z,1516679083.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:43.981Z,1516679083.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:44.373Z,1516679084.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:44.776Z,1516679084.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:45.174Z,1516679085.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:45.573Z,1516679085.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:45.980Z,1516679085.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:46.385Z,1516679086.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:46.789Z,1516679086.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:47.174Z,1516679087.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:47.577Z,1516679087.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:47.980Z,1516679087.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:48.375Z,1516679088.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:48.780Z,1516679088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:49.186Z,1516679089.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:49.590Z,1516679089.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:49.985Z,1516679089.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:50.380Z,1516679090.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:50.781Z,1516679090.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:51.175Z,1516679091.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:51.580Z,1516679091.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:51.988Z,1516679091.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:52.384Z,1516679092.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:52.783Z,1516679092.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:53.175Z,1516679093.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:53.581Z,1516679093.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:53.982Z,1516679093.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:54.395Z,1516679094.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:54.786Z,1516679094.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:55.176Z,1516679095.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:55.580Z,1516679095.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:58.683Z,1516679098.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:58.848Z,1516679098.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:59.178Z,1516679099.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:59.555Z,1516679099.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:44:59.949Z,1516679099.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:00.347Z,1516679100.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:00.751Z,1516679100.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:01.181Z,1516679101.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:01.566Z,1516679101.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:01.961Z,1516679101.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:02.355Z,1516679102.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:02.754Z,1516679102.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:03.155Z,1516679103.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:03.555Z,1516679103.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:03.970Z,1516679103.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:04.361Z,1516679104.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:04.761Z,1516679104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:05.156Z,1516679105.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:05.555Z,1516679105.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:05.965Z,1516679105.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:06.362Z,1516679106.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:06.761Z,1516679106.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:07.156Z,1516679107.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:07.559Z,1516679107.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:07.961Z,1516679107.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:08.362Z,1516679108.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:08.765Z,1516679108.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:09.156Z,1516679109.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:09.554Z,1516679109.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:09.957Z,1516679109.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:10.361Z,1516679110.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:10.761Z,1516679110.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:11.157Z,1516679111.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:11.548Z,1516679111.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:11.967Z,1516679111.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:12.369Z,1516679112.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:12.766Z,1516679112.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:13.156Z,1516679113.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:13.561Z,1516679113.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:14.008Z,1516679114.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:14.366Z,1516679114.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:14.781Z,1516679114.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:15.216Z,1516679115.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:15.565Z,1516679115.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:15.979Z,1516679115.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:16.419Z,1516679116.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:16.789Z,1516679116.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:17.174Z,1516679117.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:17.600Z,1516679117.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:17.954Z,1516679117.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:18.381Z,1516679118.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:18.762Z,1516679118.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:19.168Z,1516679119.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:19.553Z,1516679119.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:19.000Z,1516679120.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:20.369Z,1516679120.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:20.769Z,1516679120.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:21.192Z,1516679121.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:21.570Z,1516679121.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:21.988Z,1516679121.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:22.410Z,1516679122.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:22.778Z,1516679122.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:23.178Z,1516679123.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:23.585Z,1516679123.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:23.978Z,1516679123.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:24.385Z,1516679124.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:24.788Z,1516679124.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:25.165Z,1516679125.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:25.588Z,1516679125.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:26.002Z,1516679126.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:26.354Z,1516679126.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:26.760Z,1516679126.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:27.164Z,1516679127.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:27.558Z,1516679127.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:27.960Z,1516679127.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:28.364Z,1516679128.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:28.766Z,1516679128.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:29.166Z,1516679129.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:29.559Z,1516679129.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:29.955Z,1516679129.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:30.333Z,1516679130.333 [PNI_TCM](ERROR): CRC does not match. Expected:0x55732 got:0x29724 2018-01-23T03:45:30.359Z,1516679130.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:30.754Z,1516679130.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:31.164Z,1516679131.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:31.565Z,1516679131.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:31.960Z,1516679131.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:32.360Z,1516679132.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:32.766Z,1516679132.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:33.164Z,1516679133.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:33.555Z,1516679133.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:33.963Z,1516679133.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:34.368Z,1516679134.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:34.777Z,1516679134.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:35.167Z,1516679135.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:35.565Z,1516679135.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:35.969Z,1516679135.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:36.363Z,1516679136.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:36.764Z,1516679136.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:37.169Z,1516679137.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:37.581Z,1516679137.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:37.971Z,1516679137.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:38.372Z,1516679138.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:38.747Z,1516679138.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x57627 got:0x49716 2018-01-23T03:45:38.772Z,1516679138.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:39.175Z,1516679139.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:39.569Z,1516679139.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:39.951Z,1516679139.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:40.355Z,1516679140.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:40.781Z,1516679140.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:41.158Z,1516679141.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:41.552Z,1516679141.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:41.949Z,1516679141.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:42.381Z,1516679142.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:42.747Z,1516679142.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:43.154Z,1516679143.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:43.557Z,1516679143.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:43.978Z,1516679143.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:44.345Z,1516679144.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:44.750Z,1516679144.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:45.150Z,1516679145.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:45.576Z,1516679145.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:45.942Z,1516679145.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:46.357Z,1516679146.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:46.759Z,1516679146.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:47.177Z,1516679147.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:47.547Z,1516679147.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:47.958Z,1516679147.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:48.354Z,1516679148.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:48.761Z,1516679148.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:49.158Z,1516679149.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:49.561Z,1516679149.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:49.964Z,1516679149.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:50.365Z,1516679150.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:50.752Z,1516679150.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:51.148Z,1516679151.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:51.557Z,1516679151.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:51.948Z,1516679151.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:52.354Z,1516679152.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:52.762Z,1516679152.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:53.158Z,1516679153.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:53.539Z,1516679153.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:53.942Z,1516679153.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:54.344Z,1516679154.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:54.740Z,1516679154.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:55.190Z,1516679155.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:55.555Z,1516679155.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:55.954Z,1516679155.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:59.445Z,1516679159.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:59.593Z,1516679159.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:45:59.945Z,1516679159.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:00.337Z,1516679160.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:00.740Z,1516679160.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:01.116Z,1516679161.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:01.512Z,1516679161.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:01.916Z,1516679161.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:02.340Z,1516679162.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:02.722Z,1516679162.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:03.147Z,1516679163.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:03.511Z,1516679163.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:03.911Z,1516679163.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:04.313Z,1516679164.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:04.714Z,1516679164.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:05.122Z,1516679165.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:05.526Z,1516679165.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:05.921Z,1516679165.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:06.316Z,1516679166.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:06.713Z,1516679166.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:07.114Z,1516679167.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:07.526Z,1516679167.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:07.913Z,1516679167.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:08.321Z,1516679168.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:08.724Z,1516679168.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:09.122Z,1516679169.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:09.513Z,1516679169.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:09.920Z,1516679169.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:10.321Z,1516679170.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:10.713Z,1516679170.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:11.123Z,1516679171.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:11.525Z,1516679171.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:11.933Z,1516679171.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:12.317Z,1516679172.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:12.716Z,1516679172.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:13.113Z,1516679173.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:13.524Z,1516679173.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:13.921Z,1516679173.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:14.329Z,1516679174.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:14.725Z,1516679174.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:15.129Z,1516679175.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:15.521Z,1516679175.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:15.912Z,1516679175.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:16.313Z,1516679176.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:16.713Z,1516679176.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:17.122Z,1516679177.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:17.529Z,1516679177.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:17.929Z,1516679177.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:18.319Z,1516679178.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:18.715Z,1516679178.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:19.121Z,1516679179.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:19.512Z,1516679179.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:19.913Z,1516679179.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:20.321Z,1516679180.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:20.672Z,1516679180.672 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T03:46:20.672Z,1516679180.672 [NAL9602] Data Fault, FailCount= 3 2018-01-23T03:46:20.672Z,1516679180.672 [NAL9602](ERROR): Data Fault 2018-01-23T03:46:20.733Z,1516679180.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:20.758Z,1516679180.758 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T03:46:21.072Z,1516679181.072 [NAL9602](INFO): Powering down 2018-01-23T03:46:21.124Z,1516679181.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:21.517Z,1516679181.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:21.921Z,1516679181.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:21.934Z,1516679181.934 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T03:46:21.934Z,1516679181.934 [NAL9602] No Fault, FailCount= 3 2018-01-23T03:46:22.321Z,1516679182.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:22.717Z,1516679182.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:23.112Z,1516679183.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:23.521Z,1516679183.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:23.919Z,1516679183.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:24.321Z,1516679184.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:24.725Z,1516679184.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:25.121Z,1516679185.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:25.520Z,1516679185.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:25.917Z,1516679185.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:26.316Z,1516679186.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:26.714Z,1516679186.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:27.113Z,1516679187.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:27.520Z,1516679187.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:27.927Z,1516679187.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:28.301Z,1516679188.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:28.705Z,1516679188.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:29.111Z,1516679189.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:29.502Z,1516679189.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:29.935Z,1516679189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:30.307Z,1516679190.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:30.708Z,1516679190.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:31.115Z,1516679191.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:31.507Z,1516679191.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:31.904Z,1516679191.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:32.326Z,1516679192.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:32.702Z,1516679192.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:33.103Z,1516679193.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:33.531Z,1516679193.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:33.910Z,1516679193.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:34.307Z,1516679194.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:34.710Z,1516679194.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:35.109Z,1516679195.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:35.508Z,1516679195.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:35.937Z,1516679195.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:36.312Z,1516679196.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:36.712Z,1516679196.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:37.116Z,1516679197.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:37.510Z,1516679197.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:37.910Z,1516679197.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:38.314Z,1516679198.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:38.710Z,1516679198.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:39.108Z,1516679199.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:39.512Z,1516679199.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:39.909Z,1516679199.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:40.308Z,1516679200.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:40.710Z,1516679200.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:41.110Z,1516679201.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:41.511Z,1516679201.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:41.910Z,1516679201.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:42.311Z,1516679202.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:42.711Z,1516679202.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:43.110Z,1516679203.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:43.510Z,1516679203.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:43.908Z,1516679203.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:44.317Z,1516679204.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:44.714Z,1516679204.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:45.108Z,1516679205.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:45.521Z,1516679205.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:45.910Z,1516679205.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:46.308Z,1516679206.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:46.720Z,1516679206.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:47.117Z,1516679207.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:47.509Z,1516679207.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:47.912Z,1516679207.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:48.310Z,1516679208.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:48.715Z,1516679208.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:49.112Z,1516679209.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:49.511Z,1516679209.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:49.915Z,1516679209.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:50.312Z,1516679210.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:50.717Z,1516679210.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:51.109Z,1516679211.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:51.472Z,1516679211.472 [NAL9602](INFO): Powering up NAL9602 2018-01-23T03:46:51.517Z,1516679211.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:51.911Z,1516679211.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:52.309Z,1516679212.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:52.725Z,1516679212.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:53.116Z,1516679213.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:53.516Z,1516679213.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:53.917Z,1516679213.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:54.320Z,1516679214.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:54.717Z,1516679214.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:55.113Z,1516679215.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:55.522Z,1516679215.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:55.913Z,1516679215.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:56.320Z,1516679216.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:59.418Z,1516679219.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:59.557Z,1516679219.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:46:59.884Z,1516679219.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:00.287Z,1516679220.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:00.685Z,1516679220.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:01.084Z,1516679221.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:01.482Z,1516679221.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:01.884Z,1516679221.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:02.286Z,1516679222.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:02.644Z,1516679222.644 [NAL9602](INFO): NAL9602 initialized 2018-01-23T03:47:02.693Z,1516679222.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:03.084Z,1516679223.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:03.490Z,1516679223.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:03.886Z,1516679223.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:04.284Z,1516679224.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:04.689Z,1516679224.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:05.084Z,1516679225.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:05.492Z,1516679225.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:05.898Z,1516679225.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:06.290Z,1516679226.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:06.689Z,1516679226.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:07.089Z,1516679227.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:07.484Z,1516679227.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:07.889Z,1516679227.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:08.293Z,1516679228.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:08.696Z,1516679228.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:09.090Z,1516679229.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:09.489Z,1516679229.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:09.888Z,1516679229.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:10.283Z,1516679230.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:10.701Z,1516679230.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:11.088Z,1516679231.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:11.490Z,1516679231.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:11.897Z,1516679231.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:12.296Z,1516679232.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:12.689Z,1516679232.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:13.089Z,1516679233.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:13.484Z,1516679233.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:13.889Z,1516679233.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:14.293Z,1516679234.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:14.689Z,1516679234.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:15.089Z,1516679235.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:15.489Z,1516679235.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:15.882Z,1516679235.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:16.281Z,1516679236.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:16.689Z,1516679236.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:17.082Z,1516679237.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:17.494Z,1516679237.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:17.897Z,1516679237.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:18.292Z,1516679238.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:18.684Z,1516679238.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:19.084Z,1516679239.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:19.488Z,1516679239.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:19.888Z,1516679239.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:20.293Z,1516679240.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:20.692Z,1516679240.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:21.093Z,1516679241.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:21.483Z,1516679241.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:21.883Z,1516679241.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:22.281Z,1516679242.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:22.686Z,1516679242.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:23.092Z,1516679243.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:23.517Z,1516679243.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:23.517Z,1516679243.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-01-23T03:47:23.517Z,1516679243.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:47:23.519Z,1516679243.519 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:23.519Z,1516679243.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-01-23T03:47:23.519Z,1516679243.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:47:23.521Z,1516679243.521 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:23.521Z,1516679243.521 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11 2018-01-23T03:47:23.521Z,1516679243.521 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:47:23.533Z,1516679243.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:47:23.533Z,1516679243.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:47:23.534Z,1516679243.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:47:23.935Z,1516679243.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:47:23.935Z,1516679243.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-01-23T03:47:23.936Z,1516679243.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:47:23.936Z,1516679243.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-01-23T03:47:23.936Z,1516679243.936 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:47:23.936Z,1516679243.936 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11 2018-01-23T03:47:24.301Z,1516679244.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:47:24.302Z,1516679244.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:47:24.302Z,1516679244.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:47:24.302Z,1516679244.302 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:47:24.303Z,1516679244.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:47:24.303Z,1516679244.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:47:24.304Z,1516679244.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:47:24.304Z,1516679244.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:47:24.305Z,1516679244.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:47:24.692Z,1516679244.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:47:24.693Z,1516679244.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:25.092Z,1516679245.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:47:25.093Z,1516679245.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:25.491Z,1516679245.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:47:25.492Z,1516679245.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:25.895Z,1516679245.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:47:25.896Z,1516679245.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:26.298Z,1516679246.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:47:26.299Z,1516679246.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:26.700Z,1516679246.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:47:26.701Z,1516679246.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:27.097Z,1516679247.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:47:27.098Z,1516679247.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:27.495Z,1516679247.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:47:27.496Z,1516679247.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:27.896Z,1516679247.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:47:27.897Z,1516679247.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:28.273Z,1516679248.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:47:28.274Z,1516679248.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:28.697Z,1516679248.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:47:28.697Z,1516679248.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:29.100Z,1516679249.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:47:29.101Z,1516679249.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:29.493Z,1516679249.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:47:29.494Z,1516679249.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:29.908Z,1516679249.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:47:29.909Z,1516679249.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:30.309Z,1516679250.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:47:30.310Z,1516679250.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:30.683Z,1516679250.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:47:30.684Z,1516679250.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:31.080Z,1516679251.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:47:31.081Z,1516679251.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:31.492Z,1516679251.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:47:31.493Z,1516679251.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:31.884Z,1516679251.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:47:31.885Z,1516679251.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:32.292Z,1516679252.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:47:32.293Z,1516679252.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:32.690Z,1516679252.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:47:32.691Z,1516679252.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:33.102Z,1516679253.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:47:33.119Z,1516679253.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:33.483Z,1516679253.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:47:33.484Z,1516679253.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:33.882Z,1516679253.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:47:33.887Z,1516679253.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:34.285Z,1516679254.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:47:34.286Z,1516679254.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:34.700Z,1516679254.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:47:34.701Z,1516679254.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:35.085Z,1516679255.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:47:35.086Z,1516679255.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:35.494Z,1516679255.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:47:35.495Z,1516679255.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:35.905Z,1516679255.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:47:35.906Z,1516679255.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:36.294Z,1516679256.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:47:36.295Z,1516679256.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:36.691Z,1516679256.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:47:36.692Z,1516679256.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:37.092Z,1516679257.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:47:37.093Z,1516679257.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:37.488Z,1516679257.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:47:37.489Z,1516679257.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:37.887Z,1516679257.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:47:37.888Z,1516679257.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:38.296Z,1516679258.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:47:38.297Z,1516679258.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:38.708Z,1516679258.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:47:38.709Z,1516679258.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:39.101Z,1516679259.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:47:39.102Z,1516679259.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:39.500Z,1516679259.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:47:39.501Z,1516679259.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:39.908Z,1516679259.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:47:39.909Z,1516679259.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:40.280Z,1516679260.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:47:40.281Z,1516679260.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:40.708Z,1516679260.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:47:40.709Z,1516679260.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:41.108Z,1516679261.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:47:41.109Z,1516679261.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:41.488Z,1516679261.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:47:41.489Z,1516679261.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:41.889Z,1516679261.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:47:41.890Z,1516679261.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:42.286Z,1516679262.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:47:42.288Z,1516679262.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:42.685Z,1516679262.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:47:42.686Z,1516679262.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:43.092Z,1516679263.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:47:43.093Z,1516679263.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:43.484Z,1516679263.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T03:47:43.485Z,1516679263.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:43.885Z,1516679263.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:44.290Z,1516679264.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:44.690Z,1516679264.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:45.090Z,1516679265.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:45.483Z,1516679265.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:45.882Z,1516679265.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:46.284Z,1516679266.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:46.684Z,1516679266.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:47.083Z,1516679267.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:47.490Z,1516679267.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:47.890Z,1516679267.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:48.296Z,1516679268.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:48.685Z,1516679268.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:49.083Z,1516679269.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:49.484Z,1516679269.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:49.888Z,1516679269.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:50.293Z,1516679270.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:50.690Z,1516679270.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:51.090Z,1516679271.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:51.483Z,1516679271.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:51.882Z,1516679271.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:52.284Z,1516679272.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:52.685Z,1516679272.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:53.087Z,1516679273.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:53.489Z,1516679273.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:53.890Z,1516679273.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:54.288Z,1516679274.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:54.684Z,1516679274.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:55.082Z,1516679275.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:55.483Z,1516679275.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:55.884Z,1516679275.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:56.293Z,1516679276.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:56.692Z,1516679276.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:59.793Z,1516679279.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:47:59.929Z,1516679279.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:00.287Z,1516679280.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:00.684Z,1516679280.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:01.085Z,1516679281.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:01.501Z,1516679281.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:01.905Z,1516679281.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:02.291Z,1516679282.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:02.687Z,1516679282.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:03.092Z,1516679283.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:03.486Z,1516679283.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:03.885Z,1516679283.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:04.290Z,1516679284.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:04.694Z,1516679284.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:05.090Z,1516679285.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:05.493Z,1516679285.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:05.889Z,1516679285.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:06.292Z,1516679286.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:06.706Z,1516679286.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:07.090Z,1516679287.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:07.491Z,1516679287.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:07.889Z,1516679287.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:08.293Z,1516679288.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:08.694Z,1516679288.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:09.094Z,1516679289.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:09.492Z,1516679289.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:09.877Z,1516679289.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:10.303Z,1516679290.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:10.702Z,1516679290.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:11.105Z,1516679291.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:11.505Z,1516679291.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:11.885Z,1516679291.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:12.309Z,1516679292.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:12.684Z,1516679292.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:13.080Z,1516679293.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:13.486Z,1516679293.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:13.886Z,1516679293.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:14.282Z,1516679294.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:14.678Z,1516679294.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:15.085Z,1516679295.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:15.489Z,1516679295.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:15.880Z,1516679295.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:16.286Z,1516679296.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:16.711Z,1516679296.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:17.085Z,1516679297.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:17.483Z,1516679297.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:17.880Z,1516679297.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:18.293Z,1516679298.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:18.690Z,1516679298.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:19.086Z,1516679299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:19.483Z,1516679299.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:19.884Z,1516679299.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:20.286Z,1516679300.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:20.698Z,1516679300.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:21.089Z,1516679301.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:21.482Z,1516679301.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:21.885Z,1516679301.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:22.290Z,1516679302.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:22.690Z,1516679302.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:23.089Z,1516679303.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:23.481Z,1516679303.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:23.879Z,1516679303.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:24.290Z,1516679304.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:24.689Z,1516679304.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:25.097Z,1516679305.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:25.484Z,1516679305.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:25.881Z,1516679305.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:26.290Z,1516679306.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:26.693Z,1516679306.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:27.089Z,1516679307.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:27.485Z,1516679307.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:27.882Z,1516679307.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:28.294Z,1516679308.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:28.693Z,1516679308.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:29.094Z,1516679309.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:29.483Z,1516679309.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:29.885Z,1516679309.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:30.298Z,1516679310.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:30.694Z,1516679310.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:31.094Z,1516679311.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:31.497Z,1516679311.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:31.886Z,1516679311.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:32.294Z,1516679312.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:32.695Z,1516679312.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:33.091Z,1516679313.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:33.487Z,1516679313.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:33.888Z,1516679313.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:34.295Z,1516679314.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:34.697Z,1516679314.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:35.100Z,1516679315.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:35.498Z,1516679315.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:35.877Z,1516679315.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:36.301Z,1516679316.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:36.709Z,1516679316.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:37.100Z,1516679317.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:37.500Z,1516679317.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:37.875Z,1516679317.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:38.286Z,1516679318.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:38.707Z,1516679318.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:39.110Z,1516679319.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:39.481Z,1516679319.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:39.881Z,1516679319.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:40.283Z,1516679320.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:40.710Z,1516679320.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:41.106Z,1516679321.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:41.485Z,1516679321.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:41.882Z,1516679321.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:42.289Z,1516679322.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:42.680Z,1516679322.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:43.078Z,1516679323.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:43.486Z,1516679323.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:43.915Z,1516679323.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:44.294Z,1516679324.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:44.683Z,1516679324.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:45.082Z,1516679325.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:45.485Z,1516679325.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:45.880Z,1516679325.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:46.286Z,1516679326.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:46.718Z,1516679326.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:47.098Z,1516679327.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:47.488Z,1516679327.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:47.885Z,1516679327.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:48.290Z,1516679328.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:48.694Z,1516679328.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:49.091Z,1516679329.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:49.485Z,1516679329.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:49.883Z,1516679329.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:50.283Z,1516679330.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:50.702Z,1516679330.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:51.092Z,1516679331.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:51.501Z,1516679331.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:51.885Z,1516679331.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:52.283Z,1516679332.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:52.682Z,1516679332.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:53.083Z,1516679333.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:53.490Z,1516679333.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:53.898Z,1516679333.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:54.297Z,1516679334.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:54.683Z,1516679334.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:55.086Z,1516679335.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:55.492Z,1516679335.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:55.494Z,1516679335.494 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T03:48:55.495Z,1516679335.495 [Default:CheckIn:C.Wait] Stopped 2018-01-23T03:48:55.495Z,1516679335.495 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T03:48:55.495Z,1516679335.495 [Default:CheckIn:D] Running Loop=1 2018-01-23T03:48:55.885Z,1516679335.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:55.888Z,1516679335.888 [Default:CheckIn:D] Stopped 2018-01-23T03:48:55.889Z,1516679335.889 [Default:CheckIn:E] Running Loop=1 2018-01-23T03:48:56.285Z,1516679336.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:56.288Z,1516679336.288 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.063812 min 2018-01-23T03:48:56.288Z,1516679336.288 [Default:CheckIn:E] Stopped 2018-01-23T03:48:56.288Z,1516679336.288 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T03:48:56.288Z,1516679336.288 [Default:CheckIn] Stopped 2018-01-23T03:48:56.289Z,1516679336.289 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T03:48:56.289Z,1516679336.289 [Default:CheckIn](INFO): Running loop #4 2018-01-23T03:48:56.289Z,1516679336.289 [Default:CheckIn] Running Loop=4 2018-01-23T03:48:56.289Z,1516679336.289 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T03:48:56.289Z,1516679336.289 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T03:48:56.700Z,1516679336.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:48:57.098Z,1516679337.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:00.191Z,1516679340.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:00.301Z,1516679340.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:00.676Z,1516679340.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:01.074Z,1516679341.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:01.453Z,1516679341.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:01.885Z,1516679341.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:02.262Z,1516679342.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:02.693Z,1516679342.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:03.086Z,1516679343.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:03.473Z,1516679343.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:03.858Z,1516679343.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:04.290Z,1516679344.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:04.656Z,1516679344.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:05.058Z,1516679345.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:05.465Z,1516679345.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:05.892Z,1516679345.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:06.293Z,1516679346.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:06.722Z,1516679346.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:07.063Z,1516679347.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:07.484Z,1516679347.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:07.864Z,1516679347.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:08.261Z,1516679348.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:08.677Z,1516679348.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:09.100Z,1516679349.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:09.479Z,1516679349.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:09.866Z,1516679349.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:10.264Z,1516679350.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:10.659Z,1516679350.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:11.065Z,1516679351.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:11.470Z,1516679351.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:11.873Z,1516679351.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:12.301Z,1516679352.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:12.661Z,1516679352.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:13.068Z,1516679353.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:13.465Z,1516679353.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:13.863Z,1516679353.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:14.264Z,1516679354.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:14.674Z,1516679354.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:15.076Z,1516679355.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:15.484Z,1516679355.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:15.861Z,1516679355.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:16.263Z,1516679356.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:16.672Z,1516679356.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:17.067Z,1516679357.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:17.475Z,1516679357.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:17.873Z,1516679357.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:18.272Z,1516679358.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:18.655Z,1516679358.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:19.076Z,1516679359.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:19.474Z,1516679359.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:19.852Z,1516679359.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:20.255Z,1516679360.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:20.676Z,1516679360.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:21.087Z,1516679361.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:21.479Z,1516679361.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:21.856Z,1516679361.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:22.252Z,1516679362.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:22.670Z,1516679362.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:23.061Z,1516679363.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:23.459Z,1516679363.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:23.868Z,1516679363.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:24.262Z,1516679364.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:24.655Z,1516679364.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:25.057Z,1516679365.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:25.462Z,1516679365.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:25.857Z,1516679365.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:26.255Z,1516679366.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:26.669Z,1516679366.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:27.069Z,1516679367.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:27.464Z,1516679367.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:27.861Z,1516679367.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:28.257Z,1516679368.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:28.666Z,1516679368.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:29.065Z,1516679369.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:29.465Z,1516679369.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:29.869Z,1516679369.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:30.265Z,1516679370.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:30.661Z,1516679370.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:31.065Z,1516679371.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:31.457Z,1516679371.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:31.858Z,1516679371.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:32.261Z,1516679372.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:32.670Z,1516679372.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:33.077Z,1516679373.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:33.472Z,1516679373.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:33.858Z,1516679373.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:34.264Z,1516679374.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:34.677Z,1516679374.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:35.058Z,1516679375.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:35.471Z,1516679375.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:35.882Z,1516679375.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:36.269Z,1516679376.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:36.665Z,1516679376.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:37.071Z,1516679377.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:37.457Z,1516679377.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:37.867Z,1516679377.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:38.271Z,1516679378.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:38.679Z,1516679378.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:39.070Z,1516679379.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:39.479Z,1516679379.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:39.868Z,1516679379.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:40.268Z,1516679380.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:40.671Z,1516679380.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:41.045Z,1516679381.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:41.470Z,1516679381.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:41.881Z,1516679381.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:42.317Z,1516679382.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:42.666Z,1516679382.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:43.055Z,1516679383.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:43.453Z,1516679383.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:43.854Z,1516679383.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:44.260Z,1516679384.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:44.658Z,1516679384.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:45.062Z,1516679385.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:45.468Z,1516679385.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:45.856Z,1516679385.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:46.254Z,1516679386.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:46.656Z,1516679386.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:47.054Z,1516679387.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:47.461Z,1516679387.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:47.861Z,1516679387.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:48.265Z,1516679388.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:48.659Z,1516679388.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:49.055Z,1516679389.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:49.454Z,1516679389.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:49.864Z,1516679389.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:50.255Z,1516679390.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:50.669Z,1516679390.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:51.069Z,1516679391.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:51.465Z,1516679391.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:51.855Z,1516679391.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:52.256Z,1516679392.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:52.656Z,1516679392.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:53.054Z,1516679393.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:53.469Z,1516679393.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:53.869Z,1516679393.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:54.265Z,1516679394.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:54.657Z,1516679394.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:55.060Z,1516679395.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:55.455Z,1516679395.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:55.866Z,1516679395.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:56.256Z,1516679396.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:56.666Z,1516679396.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:57.069Z,1516679397.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:49:57.469Z,1516679397.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:00.552Z,1516679400.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:00.698Z,1516679400.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:01.022Z,1516679401.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:01.448Z,1516679401.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:01.851Z,1516679401.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:02.218Z,1516679402.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:02.619Z,1516679402.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:03.018Z,1516679403.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:03.422Z,1516679403.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:03.851Z,1516679403.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:04.250Z,1516679404.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:04.624Z,1516679404.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:05.022Z,1516679405.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:05.426Z,1516679405.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:05.826Z,1516679405.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:06.227Z,1516679406.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:06.622Z,1516679406.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:07.019Z,1516679407.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:07.432Z,1516679407.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:07.838Z,1516679407.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:08.230Z,1516679408.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:08.629Z,1516679408.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:09.020Z,1516679409.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:09.436Z,1516679409.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:09.834Z,1516679409.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:10.229Z,1516679410.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:10.624Z,1516679410.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:11.033Z,1516679411.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:11.434Z,1516679411.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:11.845Z,1516679411.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:12.237Z,1516679412.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:12.629Z,1516679412.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:13.026Z,1516679413.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:13.438Z,1516679413.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:13.836Z,1516679413.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:14.236Z,1516679414.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:14.632Z,1516679414.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:15.019Z,1516679415.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:15.451Z,1516679415.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:15.845Z,1516679415.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:16.245Z,1516679416.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:16.657Z,1516679416.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:17.070Z,1516679417.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:17.435Z,1516679417.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:17.841Z,1516679417.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:18.233Z,1516679418.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:18.630Z,1516679418.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:19.061Z,1516679419.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:19.461Z,1516679419.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:19.821Z,1516679419.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:20.229Z,1516679420.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:20.625Z,1516679420.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:21.022Z,1516679421.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:21.425Z,1516679421.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:21.841Z,1516679421.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:22.266Z,1516679422.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:22.646Z,1516679422.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:23.053Z,1516679423.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:23.457Z,1516679423.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:23.852Z,1516679423.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:24.221Z,1516679424.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:24.741Z,1516679424.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:24.741Z,1516679424.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-01-23T03:50:24.741Z,1516679424.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:50:24.751Z,1516679424.751 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:24.751Z,1516679424.751 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-01-23T03:50:24.751Z,1516679424.751 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:50:24.753Z,1516679424.753 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:24.753Z,1516679424.753 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12 2018-01-23T03:50:24.753Z,1516679424.753 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:50:24.815Z,1516679424.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:50:24.815Z,1516679424.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:50:24.816Z,1516679424.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:50:25.080Z,1516679425.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:50:25.080Z,1516679425.080 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-01-23T03:50:25.081Z,1516679425.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:50:25.081Z,1516679425.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-01-23T03:50:25.081Z,1516679425.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:50:25.081Z,1516679425.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12 2018-01-23T03:50:25.479Z,1516679425.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:50:25.479Z,1516679425.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:50:25.480Z,1516679425.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:50:25.480Z,1516679425.480 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:50:25.481Z,1516679425.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:50:25.481Z,1516679425.481 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:50:25.481Z,1516679425.481 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:50:25.482Z,1516679425.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:50:25.482Z,1516679425.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:50:25.841Z,1516679425.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s. 2018-01-23T03:50:25.842Z,1516679425.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:26.257Z,1516679426.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s. 2018-01-23T03:50:26.258Z,1516679426.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:26.643Z,1516679426.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s. 2018-01-23T03:50:26.644Z,1516679426.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:27.018Z,1516679427.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s. 2018-01-23T03:50:27.019Z,1516679427.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:27.441Z,1516679427.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s. 2018-01-23T03:50:27.442Z,1516679427.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:27.841Z,1516679427.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s. 2018-01-23T03:50:27.842Z,1516679427.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:28.241Z,1516679428.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s. 2018-01-23T03:50:28.242Z,1516679428.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:28.645Z,1516679428.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T03:50:28.651Z,1516679428.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:29.018Z,1516679429.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s. 2018-01-23T03:50:29.019Z,1516679429.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:29.416Z,1516679429.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T03:50:29.417Z,1516679429.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:29.819Z,1516679429.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s. 2018-01-23T03:50:29.820Z,1516679429.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:30.218Z,1516679430.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s. 2018-01-23T03:50:30.219Z,1516679430.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:30.630Z,1516679430.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s. 2018-01-23T03:50:30.643Z,1516679430.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:31.025Z,1516679431.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T03:50:31.026Z,1516679431.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:31.421Z,1516679431.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T03:50:31.422Z,1516679431.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:31.828Z,1516679431.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T03:50:31.829Z,1516679431.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:32.219Z,1516679432.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T03:50:32.220Z,1516679432.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:32.620Z,1516679432.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T03:50:32.621Z,1516679432.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:33.020Z,1516679433.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T03:50:33.021Z,1516679433.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:33.419Z,1516679433.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T03:50:33.420Z,1516679433.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:33.825Z,1516679433.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T03:50:33.826Z,1516679433.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:34.228Z,1516679434.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T03:50:34.229Z,1516679434.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:34.625Z,1516679434.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T03:50:34.626Z,1516679434.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:35.020Z,1516679435.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T03:50:35.021Z,1516679435.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:35.419Z,1516679435.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T03:50:35.420Z,1516679435.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:35.837Z,1516679435.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T03:50:35.837Z,1516679435.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:36.225Z,1516679436.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T03:50:36.226Z,1516679436.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:36.636Z,1516679436.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T03:50:36.637Z,1516679436.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:37.040Z,1516679437.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T03:50:37.041Z,1516679437.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:37.433Z,1516679437.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T03:50:37.434Z,1516679437.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:37.821Z,1516679437.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T03:50:37.822Z,1516679437.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:38.226Z,1516679438.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T03:50:38.231Z,1516679438.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:38.624Z,1516679438.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T03:50:38.625Z,1516679438.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:39.022Z,1516679439.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T03:50:39.023Z,1516679439.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:39.428Z,1516679439.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T03:50:39.429Z,1516679439.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:39.840Z,1516679439.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T03:50:39.841Z,1516679439.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:40.230Z,1516679440.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T03:50:40.232Z,1516679440.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:40.637Z,1516679440.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T03:50:40.639Z,1516679440.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:41.022Z,1516679441.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T03:50:41.023Z,1516679441.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:41.428Z,1516679441.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T03:50:41.429Z,1516679441.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:41.827Z,1516679441.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T03:50:41.828Z,1516679441.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:42.228Z,1516679442.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T03:50:42.229Z,1516679442.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:42.630Z,1516679442.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T03:50:42.631Z,1516679442.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:43.036Z,1516679443.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T03:50:43.037Z,1516679443.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:43.438Z,1516679443.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T03:50:43.439Z,1516679443.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:43.827Z,1516679443.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T03:50:43.828Z,1516679443.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:44.243Z,1516679444.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T03:50:44.244Z,1516679444.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:44.624Z,1516679444.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T03:50:44.625Z,1516679444.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:45.022Z,1516679445.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:45.427Z,1516679445.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:45.833Z,1516679445.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:46.237Z,1516679446.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:46.631Z,1516679446.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:47.023Z,1516679447.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:47.428Z,1516679447.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:47.829Z,1516679447.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:48.228Z,1516679448.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:48.633Z,1516679448.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:49.034Z,1516679449.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:49.430Z,1516679449.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:49.823Z,1516679449.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:50.222Z,1516679450.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:50.632Z,1516679450.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:51.033Z,1516679451.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:51.433Z,1516679451.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:51.836Z,1516679451.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:52.234Z,1516679452.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:52.644Z,1516679452.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:53.029Z,1516679453.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:53.418Z,1516679453.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:53.825Z,1516679453.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:54.241Z,1516679454.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:54.633Z,1516679454.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:55.044Z,1516679455.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:55.434Z,1516679455.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:55.833Z,1516679455.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:56.241Z,1516679456.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:56.616Z,1516679456.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:57.070Z,1516679457.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:57.445Z,1516679457.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:50:57.850Z,1516679457.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:01.105Z,1516679461.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:01.250Z,1516679461.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:01.593Z,1516679461.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:01.995Z,1516679461.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:02.393Z,1516679462.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:02.800Z,1516679462.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:03.198Z,1516679463.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:03.590Z,1516679463.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:03.973Z,1516679463.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:04.369Z,1516679464.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:04.770Z,1516679464.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:05.169Z,1516679465.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:05.602Z,1516679465.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:05.981Z,1516679465.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:06.375Z,1516679466.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:06.772Z,1516679466.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:07.174Z,1516679467.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:07.576Z,1516679467.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:07.974Z,1516679467.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:08.373Z,1516679468.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:08.777Z,1516679468.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:09.178Z,1516679469.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:09.585Z,1516679469.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:09.971Z,1516679469.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:10.372Z,1516679470.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:10.774Z,1516679470.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:11.172Z,1516679471.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:11.581Z,1516679471.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:11.981Z,1516679471.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:12.378Z,1516679472.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:12.772Z,1516679472.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:13.170Z,1516679473.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:13.580Z,1516679473.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:13.975Z,1516679473.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:14.370Z,1516679474.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:14.786Z,1516679474.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:15.180Z,1516679475.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:15.589Z,1516679475.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:15.981Z,1516679475.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:16.376Z,1516679476.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:16.776Z,1516679476.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:17.171Z,1516679477.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:17.592Z,1516679477.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:17.989Z,1516679477.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:18.389Z,1516679478.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:18.777Z,1516679478.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:19.171Z,1516679479.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:19.581Z,1516679479.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:19.992Z,1516679479.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:20.381Z,1516679480.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:20.774Z,1516679480.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:21.176Z,1516679481.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:21.622Z,1516679481.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:21.985Z,1516679481.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:22.382Z,1516679482.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:22.774Z,1516679482.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:23.174Z,1516679483.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:23.582Z,1516679483.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:23.985Z,1516679483.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:24.382Z,1516679484.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:24.783Z,1516679484.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:25.173Z,1516679485.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:25.582Z,1516679485.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:25.992Z,1516679485.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:26.383Z,1516679486.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:26.779Z,1516679486.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:27.180Z,1516679487.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:27.584Z,1516679487.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:27.996Z,1516679487.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:28.386Z,1516679488.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:28.774Z,1516679488.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:29.173Z,1516679489.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:29.587Z,1516679489.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:29.986Z,1516679489.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:30.382Z,1516679490.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:30.784Z,1516679490.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:31.174Z,1516679491.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:31.583Z,1516679491.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:31.992Z,1516679491.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:32.385Z,1516679492.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:32.776Z,1516679492.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:33.188Z,1516679493.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:33.593Z,1516679493.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:33.987Z,1516679493.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:34.394Z,1516679494.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:34.780Z,1516679494.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:35.185Z,1516679495.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:35.594Z,1516679495.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:35.997Z,1516679495.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:36.397Z,1516679496.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:36.768Z,1516679496.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:37.161Z,1516679497.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:37.592Z,1516679497.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:37.996Z,1516679497.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:38.390Z,1516679498.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:38.772Z,1516679498.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:39.168Z,1516679499.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:39.578Z,1516679499.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:40.002Z,1516679500.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:40.402Z,1516679500.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:40.774Z,1516679500.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:41.171Z,1516679501.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:41.581Z,1516679501.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:41.974Z,1516679501.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:42.399Z,1516679502.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:42.780Z,1516679502.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:43.174Z,1516679503.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:43.604Z,1516679503.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:43.984Z,1516679503.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:44.381Z,1516679504.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:44.774Z,1516679504.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:45.173Z,1516679505.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:45.595Z,1516679505.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:45.997Z,1516679505.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:46.390Z,1516679506.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:46.784Z,1516679506.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:47.174Z,1516679507.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:47.583Z,1516679507.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:47.993Z,1516679507.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:48.389Z,1516679508.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:48.776Z,1516679508.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:49.180Z,1516679509.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:49.591Z,1516679509.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:49.991Z,1516679509.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:50.384Z,1516679510.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:50.777Z,1516679510.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:51.177Z,1516679511.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:51.586Z,1516679511.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:51.986Z,1516679511.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:52.383Z,1516679512.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:52.776Z,1516679512.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:53.183Z,1516679513.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:53.593Z,1516679513.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:53.991Z,1516679513.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:54.386Z,1516679514.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:54.784Z,1516679514.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:55.162Z,1516679515.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:55.587Z,1516679515.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:55.992Z,1516679515.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:56.392Z,1516679516.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:56.791Z,1516679516.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:57.191Z,1516679517.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:57.562Z,1516679517.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:51:57.965Z,1516679517.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:01.209Z,1516679521.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:01.363Z,1516679521.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:01.741Z,1516679521.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:02.143Z,1516679522.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:02.506Z,1516679522.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:02.916Z,1516679522.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:03.311Z,1516679523.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:03.717Z,1516679523.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:04.125Z,1516679524.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:04.518Z,1516679524.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:04.909Z,1516679524.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:05.309Z,1516679525.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:05.712Z,1516679525.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:06.107Z,1516679526.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:06.517Z,1516679526.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:06.918Z,1516679526.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:07.317Z,1516679527.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:07.717Z,1516679527.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:08.112Z,1516679528.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:08.507Z,1516679528.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:08.918Z,1516679528.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:09.307Z,1516679529.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:09.717Z,1516679529.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:10.125Z,1516679530.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:10.518Z,1516679530.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:10.909Z,1516679530.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:11.317Z,1516679531.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:11.707Z,1516679531.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:12.113Z,1516679532.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:12.513Z,1516679532.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:12.918Z,1516679532.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:13.321Z,1516679533.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:13.717Z,1516679533.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:14.118Z,1516679534.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:14.509Z,1516679534.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:14.915Z,1516679534.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:15.318Z,1516679535.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:15.718Z,1516679535.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:16.121Z,1516679536.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:16.527Z,1516679536.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:16.915Z,1516679536.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:17.315Z,1516679537.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:17.718Z,1516679537.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:18.115Z,1516679538.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:18.515Z,1516679538.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:18.918Z,1516679538.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:19.318Z,1516679539.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:19.722Z,1516679539.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:20.111Z,1516679540.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:20.509Z,1516679540.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:20.915Z,1516679540.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:21.317Z,1516679541.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:21.720Z,1516679541.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:22.129Z,1516679542.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:22.522Z,1516679542.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:22.916Z,1516679542.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:23.319Z,1516679543.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:23.726Z,1516679543.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:24.120Z,1516679544.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:24.519Z,1516679544.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:24.922Z,1516679544.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:25.324Z,1516679545.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:25.728Z,1516679545.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:26.122Z,1516679546.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:26.520Z,1516679546.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:26.920Z,1516679546.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:27.322Z,1516679547.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:27.728Z,1516679547.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:28.123Z,1516679548.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:28.532Z,1516679548.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:28.919Z,1516679548.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:29.319Z,1516679549.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:29.715Z,1516679549.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:30.100Z,1516679550.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:30.505Z,1516679550.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:30.928Z,1516679550.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:31.325Z,1516679551.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:31.729Z,1516679551.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:32.109Z,1516679552.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:32.517Z,1516679552.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:32.910Z,1516679552.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:33.312Z,1516679553.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:33.717Z,1516679553.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:34.125Z,1516679554.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:34.518Z,1516679554.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:34.910Z,1516679554.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:35.310Z,1516679555.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:35.712Z,1516679555.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:36.120Z,1516679556.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:36.514Z,1516679556.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:36.931Z,1516679556.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:37.324Z,1516679557.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:37.725Z,1516679557.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:38.117Z,1516679558.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:38.510Z,1516679558.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:38.921Z,1516679558.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:39.316Z,1516679559.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:39.722Z,1516679559.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:40.130Z,1516679560.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:40.524Z,1516679560.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:40.924Z,1516679560.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:41.321Z,1516679561.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:41.699Z,1516679561.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:42.105Z,1516679562.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:42.505Z,1516679562.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:42.914Z,1516679562.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:43.322Z,1516679563.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:43.726Z,1516679563.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:44.108Z,1516679564.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:44.507Z,1516679564.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:44.916Z,1516679564.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:45.307Z,1516679565.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:45.717Z,1516679565.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:46.125Z,1516679566.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:46.528Z,1516679566.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:46.912Z,1516679566.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:47.318Z,1516679567.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:47.718Z,1516679567.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:48.125Z,1516679568.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:48.525Z,1516679568.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:48.912Z,1516679568.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:49.311Z,1516679569.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:49.717Z,1516679569.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:50.121Z,1516679570.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:50.525Z,1516679570.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:50.912Z,1516679570.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:51.309Z,1516679571.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:51.729Z,1516679571.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:52.121Z,1516679572.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:52.529Z,1516679572.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:52.910Z,1516679572.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:53.317Z,1516679573.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:53.721Z,1516679573.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:54.125Z,1516679574.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:54.525Z,1516679574.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:54.912Z,1516679574.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:55.311Z,1516679575.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:55.717Z,1516679575.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:56.128Z,1516679576.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:56.521Z,1516679576.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:56.912Z,1516679576.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:57.309Z,1516679577.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:57.729Z,1516679577.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:52:58.125Z,1516679578.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:01.215Z,1516679581.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:01.353Z,1516679581.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:01.677Z,1516679581.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:02.080Z,1516679582.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:02.480Z,1516679582.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:02.899Z,1516679582.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:03.289Z,1516679583.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:03.683Z,1516679583.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:04.080Z,1516679584.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:04.478Z,1516679584.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:04.878Z,1516679584.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:05.280Z,1516679585.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:05.683Z,1516679585.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:06.086Z,1516679586.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:06.486Z,1516679586.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:06.885Z,1516679586.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:07.278Z,1516679587.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:07.688Z,1516679587.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:08.084Z,1516679588.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:08.489Z,1516679588.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:08.890Z,1516679588.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:09.290Z,1516679589.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:09.689Z,1516679589.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:10.081Z,1516679590.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:10.481Z,1516679590.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:10.888Z,1516679590.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:11.288Z,1516679591.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:11.683Z,1516679591.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:12.094Z,1516679592.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:12.493Z,1516679592.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:12.893Z,1516679592.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:13.281Z,1516679593.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:13.697Z,1516679593.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:14.082Z,1516679594.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:14.482Z,1516679594.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:14.897Z,1516679594.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:15.296Z,1516679595.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:15.697Z,1516679595.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:16.085Z,1516679596.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:16.492Z,1516679596.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:16.889Z,1516679596.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:17.288Z,1516679597.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:17.683Z,1516679597.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:18.101Z,1516679598.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:18.501Z,1516679598.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:18.890Z,1516679598.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:19.288Z,1516679599.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:19.684Z,1516679599.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:20.091Z,1516679600.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:20.487Z,1516679600.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:20.900Z,1516679600.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:21.301Z,1516679601.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:21.690Z,1516679601.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:22.085Z,1516679602.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:22.482Z,1516679602.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:22.881Z,1516679602.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:23.287Z,1516679603.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:23.690Z,1516679603.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:24.100Z,1516679604.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:24.493Z,1516679604.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:24.896Z,1516679604.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:25.281Z,1516679605.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:25.685Z,1516679605.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:25.685Z,1516679605.685 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-01-23T03:53:25.685Z,1516679605.685 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:53:25.687Z,1516679605.687 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:25.687Z,1516679605.687 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-01-23T03:53:25.687Z,1516679605.687 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:53:25.689Z,1516679605.689 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:25.689Z,1516679605.689 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13 2018-01-23T03:53:25.689Z,1516679605.689 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:53:25.701Z,1516679605.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:53:25.701Z,1516679605.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:53:25.701Z,1516679605.701 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:53:26.102Z,1516679606.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:53:26.102Z,1516679606.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-01-23T03:53:26.103Z,1516679606.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:53:26.103Z,1516679606.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-01-23T03:53:26.103Z,1516679606.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:53:26.103Z,1516679606.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13 2018-01-23T03:53:26.476Z,1516679606.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:53:26.476Z,1516679606.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:53:26.477Z,1516679606.477 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:53:26.477Z,1516679606.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:53:26.477Z,1516679606.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:53:26.478Z,1516679606.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:53:26.478Z,1516679606.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:53:26.479Z,1516679606.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:53:26.479Z,1516679606.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:53:26.899Z,1516679606.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:53:26.900Z,1516679606.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:27.301Z,1516679607.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:53:27.301Z,1516679607.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:27.694Z,1516679607.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:53:27.695Z,1516679607.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:28.092Z,1516679608.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:53:28.093Z,1516679608.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:28.492Z,1516679608.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:53:28.493Z,1516679608.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:28.891Z,1516679608.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:53:28.892Z,1516679608.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:29.288Z,1516679609.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:53:29.289Z,1516679609.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:29.671Z,1516679609.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:53:29.672Z,1516679609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:30.098Z,1516679610.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:53:30.103Z,1516679610.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:30.508Z,1516679610.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:53:30.509Z,1516679610.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:30.904Z,1516679610.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:53:30.905Z,1516679610.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:31.273Z,1516679611.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:53:31.274Z,1516679611.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:31.680Z,1516679611.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:53:31.681Z,1516679611.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:32.081Z,1516679612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:53:32.082Z,1516679612.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:32.480Z,1516679612.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:53:32.481Z,1516679612.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:32.909Z,1516679612.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:53:32.910Z,1516679612.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:33.289Z,1516679613.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:53:33.290Z,1516679613.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:33.709Z,1516679613.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:53:33.710Z,1516679613.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:34.075Z,1516679614.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:53:34.076Z,1516679614.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:34.479Z,1516679614.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:53:34.480Z,1516679614.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:34.878Z,1516679614.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:53:34.879Z,1516679614.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:35.284Z,1516679615.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:53:35.285Z,1516679615.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:35.679Z,1516679615.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:53:35.680Z,1516679615.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:36.088Z,1516679616.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:53:36.089Z,1516679616.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:36.492Z,1516679616.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:53:36.493Z,1516679616.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:36.888Z,1516679616.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:53:36.889Z,1516679616.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:37.281Z,1516679617.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:53:37.281Z,1516679617.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:37.681Z,1516679617.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:53:37.682Z,1516679617.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:38.081Z,1516679618.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:53:38.081Z,1516679618.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:38.480Z,1516679618.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:53:38.481Z,1516679618.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:38.888Z,1516679618.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:53:38.889Z,1516679618.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:39.289Z,1516679619.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:53:39.290Z,1516679619.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:39.696Z,1516679619.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:53:39.697Z,1516679619.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:40.087Z,1516679620.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:53:40.088Z,1516679620.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:40.480Z,1516679620.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:53:40.481Z,1516679620.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:40.881Z,1516679620.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:53:40.882Z,1516679620.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:41.287Z,1516679621.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:53:41.288Z,1516679621.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:41.684Z,1516679621.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:53:41.685Z,1516679621.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:42.091Z,1516679622.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:53:42.092Z,1516679622.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:42.492Z,1516679622.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:53:42.493Z,1516679622.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:42.890Z,1516679622.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:53:42.891Z,1516679622.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:43.294Z,1516679623.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:53:43.295Z,1516679623.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:43.679Z,1516679623.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:53:43.680Z,1516679623.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:44.080Z,1516679624.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:53:44.081Z,1516679624.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:44.485Z,1516679624.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:53:44.486Z,1516679624.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:44.892Z,1516679624.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:53:44.893Z,1516679624.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:45.294Z,1516679625.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:53:45.295Z,1516679625.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:45.694Z,1516679625.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:46.087Z,1516679626.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:46.492Z,1516679626.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:46.893Z,1516679626.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:47.290Z,1516679627.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:47.689Z,1516679627.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:48.096Z,1516679628.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:48.497Z,1516679628.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:48.905Z,1516679628.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:49.288Z,1516679629.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:49.693Z,1516679629.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:50.072Z,1516679630.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:50.473Z,1516679630.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:50.905Z,1516679630.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:51.301Z,1516679631.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:51.702Z,1516679631.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:52.103Z,1516679632.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:52.503Z,1516679632.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:52.881Z,1516679632.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:53.278Z,1516679633.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:53.683Z,1516679633.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:54.104Z,1516679634.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:54.513Z,1516679634.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:54.904Z,1516679634.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:55.277Z,1516679635.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:55.689Z,1516679635.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:56.081Z,1516679636.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:56.476Z,1516679636.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:56.479Z,1516679636.479 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T03:48:56.3Z 2018-01-23T03:53:56.479Z,1516679636.479 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T03:53:56.480Z,1516679636.480 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T03:53:56.912Z,1516679636.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:57.414Z,1516679637.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:53:57.712Z,1516679637.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:00.858Z,1516679640.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:00.949Z,1516679640.949 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0016.lzma 2018-01-23T03:54:01.014Z,1516679641.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:01.334Z,1516679641.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:01.681Z,1516679641.681 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0016.lzma.bak 2018-01-23T03:54:01.681Z,1516679641.681 [DataOverHttps](INFO): SBD MOMSN=7754950 2018-01-23T03:54:01.741Z,1516679641.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:02.367Z,1516679642.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:02.545Z,1516679642.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:05.628Z,1516679645.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:05.768Z,1516679645.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:06.121Z,1516679646.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:06.522Z,1516679646.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:06.912Z,1516679646.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:07.311Z,1516679647.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:10.429Z,1516679650.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:10.505Z,1516679650.505 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0017.lzma 2018-01-23T03:54:10.574Z,1516679650.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:10.925Z,1516679650.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:11.257Z,1516679651.257 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0017.lzma.bak 2018-01-23T03:54:11.257Z,1516679651.257 [DataOverHttps](INFO): SBD MOMSN=7754952 2018-01-23T03:54:11.331Z,1516679651.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:11.344Z,1516679651.344 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T03:54:17.991Z,1516679657.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:17.994Z,1516679657.994 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T03:54:17.994Z,1516679657.994 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T03:54:17.994Z,1516679657.994 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T03:54:18.125Z,1516679658.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:21.178Z,1516679661.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:21.324Z,1516679661.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:21.646Z,1516679661.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:22.072Z,1516679662.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:22.446Z,1516679662.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:22.849Z,1516679662.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:23.246Z,1516679663.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:23.645Z,1516679663.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:24.053Z,1516679664.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:24.450Z,1516679664.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:24.851Z,1516679664.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:25.245Z,1516679665.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:25.645Z,1516679665.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:26.045Z,1516679666.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:26.449Z,1516679666.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:26.850Z,1516679666.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:27.253Z,1516679667.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:27.678Z,1516679667.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:28.045Z,1516679668.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:28.445Z,1516679668.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:28.857Z,1516679668.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:29.250Z,1516679669.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:29.656Z,1516679669.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:30.051Z,1516679670.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:30.444Z,1516679670.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:30.854Z,1516679670.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:31.257Z,1516679671.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:31.654Z,1516679671.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:32.048Z,1516679672.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:32.449Z,1516679672.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:32.853Z,1516679672.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:33.258Z,1516679673.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:33.657Z,1516679673.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:34.044Z,1516679674.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:34.445Z,1516679674.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:34.861Z,1516679674.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:35.264Z,1516679675.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:35.667Z,1516679675.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:36.052Z,1516679676.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:36.454Z,1516679676.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:36.861Z,1516679676.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:37.258Z,1516679677.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:37.656Z,1516679677.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:38.051Z,1516679678.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:38.453Z,1516679678.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:38.854Z,1516679678.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:39.257Z,1516679679.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:39.654Z,1516679679.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:40.047Z,1516679680.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:40.453Z,1516679680.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:40.861Z,1516679680.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:41.267Z,1516679681.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:41.654Z,1516679681.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:42.048Z,1516679682.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:42.454Z,1516679682.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:42.858Z,1516679682.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:43.259Z,1516679683.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:43.660Z,1516679683.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:44.053Z,1516679684.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:44.453Z,1516679684.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:44.862Z,1516679684.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:45.254Z,1516679685.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:45.677Z,1516679685.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:46.055Z,1516679686.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:46.441Z,1516679686.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:46.857Z,1516679686.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:47.261Z,1516679687.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:47.662Z,1516679687.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:48.052Z,1516679688.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:48.463Z,1516679688.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:48.862Z,1516679688.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:49.270Z,1516679689.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:49.665Z,1516679689.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:50.033Z,1516679690.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:50.461Z,1516679690.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:50.872Z,1516679690.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:51.246Z,1516679691.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:51.665Z,1516679691.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:52.071Z,1516679692.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:52.443Z,1516679692.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:52.853Z,1516679692.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:53.239Z,1516679693.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:53.639Z,1516679693.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:54.092Z,1516679694.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:54.453Z,1516679694.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:54.850Z,1516679694.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:55.253Z,1516679695.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:55.640Z,1516679695.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:56.048Z,1516679696.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:56.461Z,1516679696.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:56.854Z,1516679696.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:57.264Z,1516679697.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:57.720Z,1516679697.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:58.062Z,1516679698.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:58.444Z,1516679698.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:58.860Z,1516679698.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:59.261Z,1516679699.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:54:59.662Z,1516679699.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:00.059Z,1516679700.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:00.473Z,1516679700.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:00.864Z,1516679700.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:01.259Z,1516679701.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:01.660Z,1516679701.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:02.029Z,1516679702.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x7092 got:0x16384 2018-01-23T03:55:02.069Z,1516679702.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:02.451Z,1516679702.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:02.868Z,1516679702.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:03.268Z,1516679703.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:03.667Z,1516679703.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:04.065Z,1516679704.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:04.465Z,1516679704.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:04.872Z,1516679704.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:05.235Z,1516679705.235 [PNI_TCM](ERROR): CRC does not match. Expected:0x63747 got:0x1455 2018-01-23T03:55:05.271Z,1516679705.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:05.667Z,1516679705.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:06.068Z,1516679706.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:06.474Z,1516679706.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:06.868Z,1516679706.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:07.250Z,1516679707.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:07.647Z,1516679707.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:08.063Z,1516679708.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:08.439Z,1516679708.439 [PNI_TCM](ERROR): CRC does not match. Expected:0x50926 got:0x6210 2018-01-23T03:55:08.472Z,1516679708.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:08.845Z,1516679708.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:09.271Z,1516679709.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:09.679Z,1516679709.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:10.048Z,1516679710.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:10.446Z,1516679710.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:10.851Z,1516679710.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:11.261Z,1516679711.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:11.636Z,1516679711.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x56028 got:0x16956 2018-01-23T03:55:11.661Z,1516679711.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:12.048Z,1516679712.048 [PNI_TCM](ERROR): CRC does not match. Expected:0x1418 got:0x51776 2018-01-23T03:55:12.082Z,1516679712.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:12.460Z,1516679712.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:12.874Z,1516679712.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:13.265Z,1516679713.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:13.642Z,1516679713.642 [PNI_TCM](ERROR): CRC does not match. Expected:0x43386 got:0x7618 2018-01-23T03:55:13.661Z,1516679713.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:14.045Z,1516679714.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:14.457Z,1516679714.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:14.861Z,1516679714.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:15.261Z,1516679715.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:15.668Z,1516679715.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:16.104Z,1516679716.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:16.471Z,1516679716.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:16.863Z,1516679716.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:17.276Z,1516679717.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:17.664Z,1516679717.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:18.089Z,1516679718.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:18.467Z,1516679718.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:24.837Z,1516679724.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:25.009Z,1516679725.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:25.350Z,1516679725.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:25.757Z,1516679725.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:26.148Z,1516679726.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:26.553Z,1516679726.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:26.963Z,1516679726.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:27.377Z,1516679727.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:27.762Z,1516679727.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:28.170Z,1516679728.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:28.560Z,1516679728.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:28.967Z,1516679728.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:29.366Z,1516679729.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:29.768Z,1516679729.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:30.161Z,1516679730.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:30.560Z,1516679730.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:30.969Z,1516679730.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:31.382Z,1516679731.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:31.762Z,1516679731.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:32.156Z,1516679732.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:32.538Z,1516679732.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:32.966Z,1516679732.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:33.374Z,1516679733.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:33.776Z,1516679733.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:34.148Z,1516679734.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:34.541Z,1516679734.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:34.954Z,1516679734.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:35.365Z,1516679735.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:35.754Z,1516679735.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:36.143Z,1516679736.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:36.541Z,1516679736.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:36.993Z,1516679736.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:37.358Z,1516679737.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:37.754Z,1516679737.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:38.153Z,1516679738.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:38.539Z,1516679738.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:38.977Z,1516679738.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:39.372Z,1516679739.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:39.772Z,1516679739.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:40.149Z,1516679740.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:40.553Z,1516679740.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:40.953Z,1516679740.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:41.376Z,1516679741.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:41.754Z,1516679741.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:42.148Z,1516679742.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:42.547Z,1516679742.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:42.951Z,1516679742.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:43.378Z,1516679743.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:43.777Z,1516679743.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:44.153Z,1516679744.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:44.547Z,1516679744.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:44.952Z,1516679744.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:45.355Z,1516679745.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:45.751Z,1516679745.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:46.153Z,1516679746.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:46.561Z,1516679746.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:46.959Z,1516679746.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:47.363Z,1516679747.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:47.758Z,1516679747.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:48.158Z,1516679748.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:48.553Z,1516679748.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:48.957Z,1516679748.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:49.359Z,1516679749.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:49.759Z,1516679749.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:50.153Z,1516679750.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:50.551Z,1516679750.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:50.965Z,1516679750.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:51.363Z,1516679751.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:51.762Z,1516679751.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:52.154Z,1516679752.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:52.551Z,1516679752.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:52.968Z,1516679752.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:53.363Z,1516679753.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:53.764Z,1516679753.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:54.152Z,1516679754.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:54.557Z,1516679754.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:54.969Z,1516679754.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:55.364Z,1516679755.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:55.768Z,1516679755.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:56.158Z,1516679756.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:56.557Z,1516679756.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:56.961Z,1516679756.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:57.369Z,1516679757.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:57.759Z,1516679757.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:58.153Z,1516679758.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:58.565Z,1516679758.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:58.958Z,1516679758.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:59.362Z,1516679759.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:55:59.766Z,1516679759.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:00.157Z,1516679760.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:00.556Z,1516679760.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:00.961Z,1516679760.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:01.365Z,1516679761.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:01.763Z,1516679761.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:02.153Z,1516679762.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:02.553Z,1516679762.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:02.952Z,1516679762.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:03.369Z,1516679763.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:03.762Z,1516679763.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:04.162Z,1516679764.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:04.556Z,1516679764.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:04.960Z,1516679764.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:05.358Z,1516679765.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:05.753Z,1516679765.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:06.165Z,1516679766.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:06.577Z,1516679766.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:06.966Z,1516679766.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:07.358Z,1516679767.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:07.761Z,1516679767.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:08.157Z,1516679768.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:08.555Z,1516679768.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:08.961Z,1516679768.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:09.353Z,1516679769.353 [PNI_TCM](ERROR): CRC does not match. Expected:0x31659 got:0x49716 2018-01-23T03:56:09.381Z,1516679769.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:09.766Z,1516679769.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:10.162Z,1516679770.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:10.561Z,1516679770.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:10.934Z,1516679770.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x37554 got:0x4047 2018-01-23T03:56:10.965Z,1516679770.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:11.357Z,1516679771.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:11.765Z,1516679771.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:12.165Z,1516679772.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:12.571Z,1516679772.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:12.961Z,1516679772.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:13.357Z,1516679773.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:13.761Z,1516679773.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:14.153Z,1516679774.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:14.557Z,1516679774.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:14.955Z,1516679774.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:15.365Z,1516679775.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:15.765Z,1516679775.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:16.170Z,1516679776.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:16.565Z,1516679776.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:16.960Z,1516679776.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:17.365Z,1516679777.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:17.753Z,1516679777.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:18.165Z,1516679778.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:18.573Z,1516679778.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:21.676Z,1516679781.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:21.803Z,1516679781.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:22.169Z,1516679782.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:22.559Z,1516679782.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x30405 got:0x16911 2018-01-23T03:56:22.585Z,1516679782.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:23.007Z,1516679783.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:23.378Z,1516679783.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:23.777Z,1516679783.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:24.176Z,1516679784.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:24.550Z,1516679784.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:24.980Z,1516679784.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:25.353Z,1516679785.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:25.775Z,1516679785.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:26.182Z,1516679786.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:26.586Z,1516679786.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:26.586Z,1516679786.586 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-01-23T03:56:26.586Z,1516679786.586 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:56:26.588Z,1516679786.588 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:26.588Z,1516679786.588 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-01-23T03:56:26.588Z,1516679786.588 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:56:26.590Z,1516679786.590 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:26.590Z,1516679786.590 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14 2018-01-23T03:56:26.590Z,1516679786.590 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:56:26.602Z,1516679786.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:56:26.602Z,1516679786.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:56:26.602Z,1516679786.602 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:56:26.000Z,1516679787.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:56:26.000Z,1516679787.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-01-23T03:56:27.000Z,1516679787.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:56:27.000Z,1516679787.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-01-23T03:56:27.001Z,1516679787.001 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:56:27.001Z,1516679787.001 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14 2018-01-23T03:56:27.382Z,1516679787.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:56:27.382Z,1516679787.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:56:27.382Z,1516679787.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:56:27.387Z,1516679787.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:56:27.387Z,1516679787.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:56:27.388Z,1516679787.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:56:27.388Z,1516679787.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:56:27.389Z,1516679787.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:56:27.389Z,1516679787.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:56:27.759Z,1516679787.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:56:27.760Z,1516679787.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:28.179Z,1516679788.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:56:28.180Z,1516679788.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:28.564Z,1516679788.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:56:28.565Z,1516679788.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:28.964Z,1516679788.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:56:28.965Z,1516679788.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:29.391Z,1516679789.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:56:29.392Z,1516679789.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:29.791Z,1516679789.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:56:29.792Z,1516679789.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:30.161Z,1516679790.161 [PNI_TCM](ERROR): CRC does not match. Expected:0x53695 got:0x17282 2018-01-23T03:56:30.200Z,1516679790.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:56:30.201Z,1516679790.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:30.564Z,1516679790.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:56:30.565Z,1516679790.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:30.968Z,1516679790.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:56:30.969Z,1516679790.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:31.390Z,1516679791.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:56:31.391Z,1516679791.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:31.764Z,1516679791.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:56:31.765Z,1516679791.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:32.170Z,1516679792.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:56:32.171Z,1516679792.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:32.574Z,1516679792.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:56:32.575Z,1516679792.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:32.994Z,1516679792.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:56:32.995Z,1516679792.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:33.358Z,1516679793.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T03:56:33.390Z,1516679793.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:56:33.391Z,1516679793.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:33.756Z,1516679793.756 [PNI_TCM](ERROR): CRC does not match. Expected:0x1932 got:0x51520 2018-01-23T03:56:33.780Z,1516679793.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:56:33.781Z,1516679793.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:34.163Z,1516679794.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:56:34.164Z,1516679794.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:34.571Z,1516679794.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:56:34.573Z,1516679794.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:34.961Z,1516679794.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:56:34.962Z,1516679794.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:35.370Z,1516679795.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:56:35.371Z,1516679795.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:35.773Z,1516679795.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:56:35.774Z,1516679795.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:36.193Z,1516679796.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:56:36.194Z,1516679796.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:36.571Z,1516679796.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:56:36.572Z,1516679796.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:36.964Z,1516679796.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:56:36.965Z,1516679796.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:37.367Z,1516679797.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:56:37.368Z,1516679797.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:37.769Z,1516679797.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:56:37.770Z,1516679797.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:38.175Z,1516679798.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:56:38.175Z,1516679798.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:38.577Z,1516679798.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:56:38.578Z,1516679798.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:38.968Z,1516679798.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:56:38.969Z,1516679798.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:39.368Z,1516679799.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:56:39.369Z,1516679799.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:39.765Z,1516679799.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:56:39.767Z,1516679799.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:40.170Z,1516679800.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:56:40.175Z,1516679800.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:40.567Z,1516679800.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:56:40.568Z,1516679800.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:40.964Z,1516679800.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:56:40.965Z,1516679800.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:41.370Z,1516679801.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:56:41.372Z,1516679801.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:41.774Z,1516679801.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:56:41.775Z,1516679801.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:42.171Z,1516679802.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:56:42.172Z,1516679802.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:42.564Z,1516679802.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:56:42.565Z,1516679802.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:42.965Z,1516679802.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:56:42.966Z,1516679802.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:43.364Z,1516679803.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:56:43.366Z,1516679803.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:43.766Z,1516679803.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:56:43.771Z,1516679803.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:44.169Z,1516679804.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:56:44.170Z,1516679804.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:44.575Z,1516679804.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:56:44.577Z,1516679804.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:44.982Z,1516679804.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:56:44.983Z,1516679804.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:45.346Z,1516679805.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:56:45.371Z,1516679805.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:45.769Z,1516679805.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:56:45.770Z,1516679805.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:46.173Z,1516679806.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:56:46.174Z,1516679806.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:46.587Z,1516679806.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:46.978Z,1516679806.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:47.378Z,1516679807.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:47.788Z,1516679807.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:48.187Z,1516679808.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:48.557Z,1516679808.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:48.956Z,1516679808.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:49.355Z,1516679809.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:49.756Z,1516679809.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:50.158Z,1516679810.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:50.562Z,1516679810.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:50.958Z,1516679810.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:51.356Z,1516679811.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:51.761Z,1516679811.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:52.160Z,1516679812.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:52.557Z,1516679812.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:52.955Z,1516679812.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:53.365Z,1516679813.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:53.761Z,1516679813.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:54.165Z,1516679814.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:54.555Z,1516679814.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:54.956Z,1516679814.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:55.358Z,1516679815.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:55.761Z,1516679815.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:56.161Z,1516679816.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:56.562Z,1516679816.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:56.965Z,1516679816.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:57.356Z,1516679817.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:57.756Z,1516679817.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:58.164Z,1516679818.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:58.557Z,1516679818.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:58.955Z,1516679818.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:59.365Z,1516679819.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:56:59.761Z,1516679819.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:00.169Z,1516679820.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:00.555Z,1516679820.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:00.956Z,1516679820.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:01.359Z,1516679821.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:01.757Z,1516679821.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:02.166Z,1516679822.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:02.565Z,1516679822.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:02.966Z,1516679822.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:03.361Z,1516679823.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:03.764Z,1516679823.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:04.164Z,1516679824.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:04.558Z,1516679824.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:04.957Z,1516679824.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:05.316Z,1516679825.316 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T03:57:05.316Z,1516679825.316 [NAL9602] Data Fault, FailCount= 4 2018-01-23T03:57:05.316Z,1516679825.316 [NAL9602](ERROR): Data Fault 2018-01-23T03:57:05.372Z,1516679825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:05.397Z,1516679825.397 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T03:57:05.716Z,1516679825.716 [NAL9602](INFO): Powering down 2018-01-23T03:57:05.773Z,1516679825.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:06.158Z,1516679826.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:06.570Z,1516679826.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:06.596Z,1516679826.596 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T03:57:06.596Z,1516679826.596 [NAL9602] No Fault, FailCount= 4 2018-01-23T03:57:06.958Z,1516679826.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:07.358Z,1516679827.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:07.767Z,1516679827.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:08.157Z,1516679828.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:08.557Z,1516679828.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:08.968Z,1516679828.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:09.357Z,1516679829.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:09.759Z,1516679829.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:10.158Z,1516679830.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:10.561Z,1516679830.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:10.958Z,1516679830.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:11.371Z,1516679831.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:11.757Z,1516679831.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:12.157Z,1516679832.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:12.565Z,1516679832.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:12.959Z,1516679832.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:13.365Z,1516679833.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:13.769Z,1516679833.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:14.159Z,1516679834.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:14.564Z,1516679834.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:14.969Z,1516679834.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:15.365Z,1516679835.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:15.764Z,1516679835.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:16.158Z,1516679836.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:16.566Z,1516679836.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:16.953Z,1516679836.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:17.362Z,1516679837.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:17.813Z,1516679837.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:18.169Z,1516679838.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:18.568Z,1516679838.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:21.643Z,1516679841.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:21.761Z,1516679841.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:22.144Z,1516679842.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:22.539Z,1516679842.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:22.931Z,1516679842.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:23.344Z,1516679843.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:23.735Z,1516679843.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:24.132Z,1516679844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:24.535Z,1516679844.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:24.933Z,1516679844.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:25.334Z,1516679845.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:25.734Z,1516679845.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:26.134Z,1516679846.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:26.532Z,1516679846.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:26.941Z,1516679846.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:27.338Z,1516679847.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:27.738Z,1516679847.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:28.134Z,1516679848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:28.534Z,1516679848.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:28.935Z,1516679848.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:29.345Z,1516679849.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:29.734Z,1516679849.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:30.132Z,1516679850.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:30.536Z,1516679850.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:30.934Z,1516679850.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:31.334Z,1516679851.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:31.744Z,1516679851.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:32.138Z,1516679852.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:32.532Z,1516679852.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:32.936Z,1516679852.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:33.338Z,1516679853.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:33.738Z,1516679853.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:34.136Z,1516679854.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:34.534Z,1516679854.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:34.935Z,1516679854.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:35.345Z,1516679855.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:35.734Z,1516679855.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:36.093Z,1516679856.093 [NAL9602](INFO): Powering up NAL9602 2018-01-23T03:57:36.139Z,1516679856.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:36.534Z,1516679856.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:36.934Z,1516679856.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:37.332Z,1516679857.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:37.745Z,1516679857.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:38.135Z,1516679858.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:38.535Z,1516679858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:38.937Z,1516679858.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:39.339Z,1516679859.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:39.739Z,1516679859.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:40.136Z,1516679860.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:40.542Z,1516679860.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:40.939Z,1516679860.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:41.337Z,1516679861.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:41.735Z,1516679861.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:42.134Z,1516679862.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:42.549Z,1516679862.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:42.940Z,1516679862.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:43.336Z,1516679863.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:43.738Z,1516679863.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:44.149Z,1516679864.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:44.545Z,1516679864.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:44.949Z,1516679864.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:45.338Z,1516679865.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:45.745Z,1516679865.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:46.137Z,1516679866.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:46.560Z,1516679866.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:46.896Z,1516679866.896 [NAL9602](INFO): NAL9602 initialized 2018-01-23T03:57:46.958Z,1516679866.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:47.338Z,1516679867.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:47.748Z,1516679867.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:48.156Z,1516679868.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:48.548Z,1516679868.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:48.941Z,1516679868.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:49.344Z,1516679869.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:49.744Z,1516679869.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:50.163Z,1516679870.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:50.559Z,1516679870.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:50.948Z,1516679870.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:51.349Z,1516679871.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:51.742Z,1516679871.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:52.145Z,1516679872.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:52.547Z,1516679872.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:52.950Z,1516679872.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:53.361Z,1516679873.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:53.761Z,1516679873.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:54.125Z,1516679874.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:54.533Z,1516679874.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:54.966Z,1516679874.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:55.329Z,1516679875.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:55.765Z,1516679875.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:56.146Z,1516679876.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:56.538Z,1516679876.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:56.942Z,1516679876.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:57.336Z,1516679877.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:57.734Z,1516679877.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:58.136Z,1516679878.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:58.540Z,1516679878.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:58.938Z,1516679878.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:59.342Z,1516679879.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:57:59.768Z,1516679879.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:00.132Z,1516679880.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:00.536Z,1516679880.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:00.934Z,1516679880.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:01.335Z,1516679881.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:01.745Z,1516679881.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:02.145Z,1516679882.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:02.545Z,1516679882.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:02.953Z,1516679882.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:03.343Z,1516679883.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:03.737Z,1516679883.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:04.137Z,1516679884.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:04.540Z,1516679884.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:04.949Z,1516679884.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:05.353Z,1516679885.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:05.750Z,1516679885.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:06.137Z,1516679886.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:06.541Z,1516679886.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:06.938Z,1516679886.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:07.338Z,1516679887.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:07.741Z,1516679887.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:08.145Z,1516679888.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:08.549Z,1516679888.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:08.946Z,1516679888.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:09.345Z,1516679889.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:09.737Z,1516679889.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:10.144Z,1516679890.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:10.545Z,1516679890.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:10.950Z,1516679890.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:11.351Z,1516679891.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:11.748Z,1516679891.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:12.145Z,1516679892.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:12.541Z,1516679892.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:12.938Z,1516679892.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:13.341Z,1516679893.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:13.741Z,1516679893.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:14.148Z,1516679894.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:14.550Z,1516679894.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:14.946Z,1516679894.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:15.339Z,1516679895.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:15.743Z,1516679895.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:16.137Z,1516679896.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:16.542Z,1516679896.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:16.957Z,1516679896.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:17.354Z,1516679897.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:17.748Z,1516679897.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:18.141Z,1516679898.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:18.541Z,1516679898.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:18.940Z,1516679898.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:22.055Z,1516679902.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:22.205Z,1516679902.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:22.565Z,1516679902.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:22.959Z,1516679902.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:23.361Z,1516679903.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:23.749Z,1516679903.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:24.146Z,1516679904.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:24.561Z,1516679904.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:24.965Z,1516679904.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:25.362Z,1516679905.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:25.757Z,1516679905.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:26.146Z,1516679906.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:26.553Z,1516679906.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:26.948Z,1516679906.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:27.357Z,1516679907.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:27.750Z,1516679907.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:28.156Z,1516679908.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:28.559Z,1516679908.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:28.956Z,1516679908.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:29.353Z,1516679909.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:29.746Z,1516679909.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:30.157Z,1516679910.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:30.553Z,1516679910.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:30.955Z,1516679910.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:31.360Z,1516679911.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:31.755Z,1516679911.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:32.146Z,1516679912.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:32.554Z,1516679912.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:32.953Z,1516679912.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:33.347Z,1516679913.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:33.748Z,1516679913.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:34.154Z,1516679914.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:34.558Z,1516679914.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:34.959Z,1516679914.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:35.350Z,1516679915.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:35.754Z,1516679915.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:36.149Z,1516679916.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:36.552Z,1516679916.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:36.954Z,1516679916.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:37.362Z,1516679917.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:37.754Z,1516679917.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:38.145Z,1516679918.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:38.552Z,1516679918.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:38.947Z,1516679918.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:39.345Z,1516679919.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:39.752Z,1516679919.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:40.165Z,1516679920.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:40.560Z,1516679920.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:40.959Z,1516679920.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:41.360Z,1516679921.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:41.745Z,1516679921.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:42.146Z,1516679922.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:42.552Z,1516679922.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:42.954Z,1516679922.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:43.365Z,1516679923.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:43.765Z,1516679923.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:44.146Z,1516679924.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:44.548Z,1516679924.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:44.952Z,1516679924.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:45.355Z,1516679925.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:45.753Z,1516679925.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:46.154Z,1516679926.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:46.558Z,1516679926.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:46.965Z,1516679926.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:47.350Z,1516679927.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:47.754Z,1516679927.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:48.147Z,1516679928.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:48.552Z,1516679928.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:48.954Z,1516679928.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:49.359Z,1516679929.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:49.754Z,1516679929.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:50.145Z,1516679930.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:50.553Z,1516679930.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:50.954Z,1516679930.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:51.346Z,1516679931.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:51.752Z,1516679931.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:52.165Z,1516679932.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:52.560Z,1516679932.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:52.961Z,1516679932.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:53.356Z,1516679933.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:53.745Z,1516679933.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:54.152Z,1516679934.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:54.552Z,1516679934.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:54.954Z,1516679934.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:55.365Z,1516679935.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:55.754Z,1516679935.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:56.154Z,1516679936.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:56.549Z,1516679936.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:56.952Z,1516679936.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:57.351Z,1516679937.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:57.750Z,1516679937.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:58.163Z,1516679938.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:58.562Z,1516679938.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:58.965Z,1516679938.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:59.353Z,1516679939.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:58:59.753Z,1516679939.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:00.152Z,1516679940.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:00.552Z,1516679940.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:00.965Z,1516679940.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:01.369Z,1516679941.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:01.756Z,1516679941.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:02.149Z,1516679942.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:02.546Z,1516679942.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:02.953Z,1516679942.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:03.361Z,1516679943.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:03.752Z,1516679943.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:04.165Z,1516679944.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:04.560Z,1516679944.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:04.959Z,1516679944.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:05.357Z,1516679945.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:05.758Z,1516679945.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:06.148Z,1516679946.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:06.561Z,1516679946.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:06.970Z,1516679946.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:07.369Z,1516679947.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:07.765Z,1516679947.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:08.168Z,1516679948.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:08.537Z,1516679948.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:08.967Z,1516679948.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:09.369Z,1516679949.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:09.744Z,1516679949.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:10.170Z,1516679950.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:10.589Z,1516679950.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:10.963Z,1516679950.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:11.343Z,1516679951.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:11.757Z,1516679951.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:12.151Z,1516679952.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:12.556Z,1516679952.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:12.959Z,1516679952.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:13.356Z,1516679953.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:13.769Z,1516679953.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:14.151Z,1516679954.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:14.541Z,1516679954.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:14.956Z,1516679954.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:15.356Z,1516679955.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:15.758Z,1516679955.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:16.164Z,1516679956.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:16.559Z,1516679956.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:16.957Z,1516679956.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:17.360Z,1516679957.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:17.772Z,1516679957.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:18.156Z,1516679958.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:18.159Z,1516679958.159 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T03:59:18.159Z,1516679958.159 [Default:CheckIn:C.Wait] Stopped 2018-01-23T03:59:18.159Z,1516679958.159 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T03:59:18.159Z,1516679958.159 [Default:CheckIn:D] Running Loop=1 2018-01-23T03:59:18.586Z,1516679958.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:18.589Z,1516679958.589 [Default:CheckIn:D] Stopped 2018-01-23T03:59:18.590Z,1516679958.590 [Default:CheckIn:E] Running Loop=1 2018-01-23T03:59:18.962Z,1516679958.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:18.965Z,1516679958.965 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.442159 min 2018-01-23T03:59:18.965Z,1516679958.965 [Default:CheckIn:E] Stopped 2018-01-23T03:59:18.965Z,1516679958.965 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T03:59:18.965Z,1516679958.965 [Default:CheckIn] Stopped 2018-01-23T03:59:18.965Z,1516679958.965 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T03:59:18.966Z,1516679958.966 [Default:CheckIn](INFO): Running loop #5 2018-01-23T03:59:18.966Z,1516679958.966 [Default:CheckIn] Running Loop=5 2018-01-23T03:59:18.966Z,1516679958.966 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T03:59:18.966Z,1516679958.966 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T03:59:22.064Z,1516679962.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:22.220Z,1516679962.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:22.531Z,1516679962.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:22.934Z,1516679962.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:23.340Z,1516679963.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:23.739Z,1516679963.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:24.142Z,1516679964.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:24.553Z,1516679964.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:24.953Z,1516679964.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:25.339Z,1516679965.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:25.745Z,1516679965.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:26.140Z,1516679966.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:26.542Z,1516679966.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:26.949Z,1516679966.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:27.353Z,1516679967.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:27.749Z,1516679967.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:27.749Z,1516679967.749 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-01-23T03:59:27.749Z,1516679967.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T03:59:27.751Z,1516679967.751 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:27.751Z,1516679967.751 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-01-23T03:59:27.751Z,1516679967.751 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T03:59:27.753Z,1516679967.753 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:27.753Z,1516679967.753 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15 2018-01-23T03:59:27.753Z,1516679967.753 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T03:59:27.796Z,1516679967.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T03:59:27.796Z,1516679967.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T03:59:27.796Z,1516679967.796 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T03:59:28.149Z,1516679968.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T03:59:28.149Z,1516679968.149 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-01-23T03:59:28.150Z,1516679968.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T03:59:28.150Z,1516679968.150 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-01-23T03:59:28.150Z,1516679968.150 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T03:59:28.150Z,1516679968.150 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15 2018-01-23T03:59:28.542Z,1516679968.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T03:59:28.542Z,1516679968.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:59:28.543Z,1516679968.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:59:28.543Z,1516679968.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T03:59:28.544Z,1516679968.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:59:28.544Z,1516679968.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:59:28.544Z,1516679968.544 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T03:59:28.545Z,1516679968.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T03:59:28.545Z,1516679968.545 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T03:59:28.950Z,1516679968.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T03:59:28.951Z,1516679968.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:29.350Z,1516679969.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T03:59:29.351Z,1516679969.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:29.751Z,1516679969.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T03:59:29.752Z,1516679969.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:30.144Z,1516679970.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T03:59:30.145Z,1516679970.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:30.544Z,1516679970.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T03:59:30.545Z,1516679970.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:30.945Z,1516679970.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T03:59:30.946Z,1516679970.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:31.352Z,1516679971.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T03:59:31.353Z,1516679971.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:31.738Z,1516679971.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T03:59:31.739Z,1516679971.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:32.134Z,1516679972.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T03:59:32.135Z,1516679972.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:32.531Z,1516679972.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T03:59:32.532Z,1516679972.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:32.966Z,1516679972.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T03:59:32.967Z,1516679972.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:33.337Z,1516679973.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T03:59:33.338Z,1516679973.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:33.737Z,1516679973.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T03:59:33.738Z,1516679973.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:34.140Z,1516679974.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T03:59:34.141Z,1516679974.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:34.531Z,1516679974.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T03:59:34.532Z,1516679974.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:34.937Z,1516679974.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T03:59:34.938Z,1516679974.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:35.337Z,1516679975.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T03:59:35.338Z,1516679975.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:35.765Z,1516679975.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T03:59:35.766Z,1516679975.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:36.139Z,1516679976.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T03:59:36.140Z,1516679976.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:36.539Z,1516679976.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T03:59:36.540Z,1516679976.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:36.942Z,1516679976.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T03:59:36.943Z,1516679976.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:37.345Z,1516679977.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T03:59:37.346Z,1516679977.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:37.742Z,1516679977.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T03:59:37.743Z,1516679977.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:38.144Z,1516679978.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T03:59:38.145Z,1516679978.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:38.540Z,1516679978.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T03:59:38.541Z,1516679978.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:38.943Z,1516679978.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T03:59:38.944Z,1516679978.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:39.346Z,1516679979.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T03:59:39.348Z,1516679979.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:39.744Z,1516679979.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T03:59:39.745Z,1516679979.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:40.144Z,1516679980.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T03:59:40.145Z,1516679980.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:40.539Z,1516679980.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T03:59:40.540Z,1516679980.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:40.943Z,1516679980.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T03:59:40.944Z,1516679980.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:41.345Z,1516679981.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T03:59:41.346Z,1516679981.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:41.745Z,1516679981.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T03:59:41.746Z,1516679981.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:42.140Z,1516679982.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T03:59:42.141Z,1516679982.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:42.535Z,1516679982.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T03:59:42.536Z,1516679982.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:42.941Z,1516679982.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T03:59:42.942Z,1516679982.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:43.342Z,1516679983.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T03:59:43.343Z,1516679983.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:43.742Z,1516679983.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T03:59:43.743Z,1516679983.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:44.138Z,1516679984.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T03:59:44.139Z,1516679984.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:44.540Z,1516679984.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T03:59:44.541Z,1516679984.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:44.943Z,1516679984.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T03:59:44.944Z,1516679984.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:45.372Z,1516679985.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T03:59:45.373Z,1516679985.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:45.741Z,1516679985.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T03:59:45.742Z,1516679985.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:46.133Z,1516679986.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T03:59:46.134Z,1516679986.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:46.539Z,1516679986.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T03:59:46.540Z,1516679986.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:46.942Z,1516679986.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T03:59:46.943Z,1516679986.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:47.352Z,1516679987.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T03:59:47.353Z,1516679987.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:47.753Z,1516679987.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:48.141Z,1516679988.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:48.538Z,1516679988.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:48.951Z,1516679988.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:49.353Z,1516679989.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:49.751Z,1516679989.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:50.144Z,1516679990.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:50.535Z,1516679990.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:50.945Z,1516679990.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:51.347Z,1516679991.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:51.753Z,1516679991.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:52.146Z,1516679992.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:52.543Z,1516679992.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:52.942Z,1516679992.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:53.340Z,1516679993.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:53.743Z,1516679993.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:54.157Z,1516679994.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:54.547Z,1516679994.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:54.953Z,1516679994.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:55.339Z,1516679995.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:55.745Z,1516679995.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:56.145Z,1516679996.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:56.540Z,1516679996.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:56.940Z,1516679996.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:57.353Z,1516679997.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:57.746Z,1516679997.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:58.148Z,1516679998.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:58.543Z,1516679998.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:58.940Z,1516679998.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:59.336Z,1516679999.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T03:59:59.745Z,1516679999.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:00.148Z,1516680000.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:00.552Z,1516680000.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:00.952Z,1516680000.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:01.344Z,1516680001.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:01.745Z,1516680001.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:02.143Z,1516680002.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:02.544Z,1516680002.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:02.943Z,1516680002.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:03.354Z,1516680003.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:03.747Z,1516680003.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:04.153Z,1516680004.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:04.543Z,1516680004.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:04.944Z,1516680004.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:05.343Z,1516680005.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:05.741Z,1516680005.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:06.153Z,1516680006.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:06.546Z,1516680006.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:06.955Z,1516680006.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:07.344Z,1516680007.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:07.741Z,1516680007.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:08.141Z,1516680008.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:08.549Z,1516680008.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:08.948Z,1516680008.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:09.349Z,1516680009.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:09.749Z,1516680009.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:10.156Z,1516680010.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:10.548Z,1516680010.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:10.949Z,1516680010.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:11.346Z,1516680011.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:11.748Z,1516680011.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:12.155Z,1516680012.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:12.549Z,1516680012.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:12.958Z,1516680012.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:13.334Z,1516680013.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:13.737Z,1516680013.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:14.135Z,1516680014.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:14.535Z,1516680014.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:14.937Z,1516680014.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:15.366Z,1516680015.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:15.778Z,1516680015.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:16.146Z,1516680016.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:16.551Z,1516680016.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:16.968Z,1516680016.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:17.350Z,1516680017.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:17.753Z,1516680017.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:18.161Z,1516680018.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:18.558Z,1516680018.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:18.962Z,1516680018.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:19.369Z,1516680019.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:25.462Z,1516680025.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:25.617Z,1516680025.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:25.990Z,1516680025.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:26.395Z,1516680026.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:26.778Z,1516680026.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:27.176Z,1516680027.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:27.575Z,1516680027.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:27.975Z,1516680027.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:28.384Z,1516680028.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:28.780Z,1516680028.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:29.183Z,1516680029.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:29.576Z,1516680029.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:29.975Z,1516680029.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:30.368Z,1516680030.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:30.755Z,1516680030.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:31.182Z,1516680031.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:31.585Z,1516680031.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:31.985Z,1516680031.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:32.360Z,1516680032.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:32.765Z,1516680032.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:33.159Z,1516680033.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:33.565Z,1516680033.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:33.964Z,1516680033.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:34.370Z,1516680034.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:34.790Z,1516680034.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:35.170Z,1516680035.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:35.564Z,1516680035.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:35.965Z,1516680035.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:36.422Z,1516680036.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:36.764Z,1516680036.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:37.193Z,1516680037.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:37.574Z,1516680037.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:37.969Z,1516680037.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:38.369Z,1516680038.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:38.766Z,1516680038.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:39.210Z,1516680039.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:39.567Z,1516680039.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:39.964Z,1516680039.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:40.376Z,1516680040.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:40.782Z,1516680040.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:41.173Z,1516680041.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:41.565Z,1516680041.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:42.050Z,1516680042.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:42.377Z,1516680042.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:42.765Z,1516680042.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:43.175Z,1516680043.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:43.577Z,1516680043.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:43.981Z,1516680043.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:44.364Z,1516680044.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:44.766Z,1516680044.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:45.164Z,1516680045.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:45.565Z,1516680045.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:45.970Z,1516680045.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:46.390Z,1516680046.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:46.781Z,1516680046.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:47.181Z,1516680047.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:47.568Z,1516680047.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:47.969Z,1516680047.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:48.372Z,1516680048.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:48.775Z,1516680048.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:49.174Z,1516680049.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:49.578Z,1516680049.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:49.989Z,1516680049.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:50.366Z,1516680050.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:50.771Z,1516680050.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:51.173Z,1516680051.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:51.571Z,1516680051.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:51.972Z,1516680051.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:52.380Z,1516680052.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:52.781Z,1516680052.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:53.175Z,1516680053.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:53.577Z,1516680053.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:53.973Z,1516680053.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:54.371Z,1516680054.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:54.776Z,1516680054.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:55.174Z,1516680055.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:55.585Z,1516680055.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:55.975Z,1516680055.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:56.361Z,1516680056.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:56.771Z,1516680056.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:57.155Z,1516680057.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:57.560Z,1516680057.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:57.981Z,1516680057.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:58.381Z,1516680058.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:58.792Z,1516680058.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:59.184Z,1516680059.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:59.583Z,1516680059.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:00:59.961Z,1516680059.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:00.364Z,1516680060.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:00.762Z,1516680060.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:01.166Z,1516680061.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:01.574Z,1516680061.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:01.972Z,1516680061.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:02.361Z,1516680062.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:02.762Z,1516680062.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:03.162Z,1516680063.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:03.562Z,1516680063.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:03.965Z,1516680063.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:04.373Z,1516680064.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:04.777Z,1516680064.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:05.177Z,1516680065.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:05.568Z,1516680065.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:05.973Z,1516680065.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:06.364Z,1516680066.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:06.768Z,1516680066.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:07.173Z,1516680067.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:07.577Z,1516680067.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:07.973Z,1516680067.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:08.362Z,1516680068.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:08.770Z,1516680068.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:09.167Z,1516680069.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:09.565Z,1516680069.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:09.976Z,1516680069.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:10.374Z,1516680070.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:10.777Z,1516680070.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:11.174Z,1516680071.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:11.566Z,1516680071.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:11.973Z,1516680071.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:12.371Z,1516680072.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:12.774Z,1516680072.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:13.174Z,1516680073.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:13.577Z,1516680073.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:13.982Z,1516680073.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:14.365Z,1516680074.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:14.777Z,1516680074.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:15.174Z,1516680075.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:15.571Z,1516680075.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:15.968Z,1516680075.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:16.392Z,1516680076.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:16.784Z,1516680076.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:17.170Z,1516680077.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:17.564Z,1516680077.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:17.966Z,1516680077.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:18.365Z,1516680078.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:18.765Z,1516680078.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:19.188Z,1516680079.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:19.574Z,1516680079.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:22.734Z,1516680082.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:22.873Z,1516680082.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:23.233Z,1516680083.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:23.630Z,1516680083.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:24.029Z,1516680084.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:24.426Z,1516680084.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:24.829Z,1516680084.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:25.227Z,1516680085.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:25.631Z,1516680085.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:26.025Z,1516680086.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:26.437Z,1516680086.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:26.825Z,1516680086.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:27.235Z,1516680087.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:27.644Z,1516680087.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:28.045Z,1516680088.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:28.427Z,1516680088.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:28.826Z,1516680088.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:29.224Z,1516680089.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:29.633Z,1516680089.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:30.023Z,1516680090.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:30.433Z,1516680090.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:30.838Z,1516680090.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:31.234Z,1516680091.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:31.637Z,1516680091.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:32.027Z,1516680092.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:32.437Z,1516680092.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:32.830Z,1516680092.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:33.238Z,1516680093.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:33.637Z,1516680093.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:34.037Z,1516680094.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:34.436Z,1516680094.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:34.830Z,1516680094.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:35.232Z,1516680095.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:35.634Z,1516680095.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:36.021Z,1516680096.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:36.449Z,1516680096.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:36.843Z,1516680096.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:37.244Z,1516680097.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:37.635Z,1516680097.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:38.036Z,1516680098.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:38.435Z,1516680098.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:38.835Z,1516680098.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:39.242Z,1516680099.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:39.638Z,1516680099.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:40.037Z,1516680100.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:40.444Z,1516680100.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:40.839Z,1516680100.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:41.237Z,1516680101.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:41.615Z,1516680101.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:42.055Z,1516680102.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:42.453Z,1516680102.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:42.856Z,1516680102.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:43.246Z,1516680103.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:43.629Z,1516680103.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:44.023Z,1516680104.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:44.425Z,1516680104.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:44.823Z,1516680104.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:45.253Z,1516680105.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:45.626Z,1516680105.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:46.030Z,1516680106.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:46.420Z,1516680106.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:46.824Z,1516680106.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:47.226Z,1516680107.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:47.629Z,1516680107.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:48.025Z,1516680108.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:48.434Z,1516680108.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:48.838Z,1516680108.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:49.235Z,1516680109.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:49.631Z,1516680109.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:50.033Z,1516680110.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:50.425Z,1516680110.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:50.832Z,1516680110.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:51.239Z,1516680111.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:51.635Z,1516680111.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:52.033Z,1516680112.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:52.433Z,1516680112.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:52.831Z,1516680112.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:53.231Z,1516680113.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:53.633Z,1516680113.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:54.028Z,1516680114.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:54.434Z,1516680114.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:54.841Z,1516680114.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:55.234Z,1516680115.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:55.633Z,1516680115.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:56.033Z,1516680116.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:56.431Z,1516680116.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:56.831Z,1516680116.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:57.243Z,1516680117.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:57.642Z,1516680117.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:58.034Z,1516680118.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:58.427Z,1516680118.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:58.829Z,1516680118.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:59.231Z,1516680119.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:01:59.628Z,1516680119.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:00.031Z,1516680120.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:00.437Z,1516680120.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:00.841Z,1516680120.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:01.234Z,1516680121.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:01.635Z,1516680121.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:02.038Z,1516680122.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:02.432Z,1516680122.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:02.834Z,1516680122.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:03.241Z,1516680123.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:03.643Z,1516680123.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:04.049Z,1516680124.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:04.436Z,1516680124.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:04.820Z,1516680124.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:05.224Z,1516680125.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:05.625Z,1516680125.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:06.024Z,1516680126.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:06.454Z,1516680126.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:06.834Z,1516680126.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:07.226Z,1516680127.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:07.622Z,1516680127.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:08.028Z,1516680128.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:08.433Z,1516680128.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:08.827Z,1516680128.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:09.229Z,1516680129.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:09.634Z,1516680129.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:10.042Z,1516680130.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:10.425Z,1516680130.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:10.826Z,1516680130.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:11.233Z,1516680131.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:11.626Z,1516680131.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:12.023Z,1516680132.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:12.435Z,1516680132.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:12.833Z,1516680132.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:13.233Z,1516680133.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:13.624Z,1516680133.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:14.023Z,1516680134.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:14.425Z,1516680134.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:14.826Z,1516680134.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:15.234Z,1516680135.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:15.637Z,1516680135.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:16.041Z,1516680136.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:16.427Z,1516680136.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:16.827Z,1516680136.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:17.225Z,1516680137.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:17.628Z,1516680137.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:18.025Z,1516680138.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:18.433Z,1516680138.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:18.836Z,1516680138.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:19.233Z,1516680139.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:19.629Z,1516680139.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:22.732Z,1516680142.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:22.872Z,1516680142.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:23.233Z,1516680143.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:23.634Z,1516680143.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:24.026Z,1516680144.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:24.423Z,1516680144.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:24.826Z,1516680144.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:25.230Z,1516680145.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:25.630Z,1516680145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:26.026Z,1516680146.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:26.417Z,1516680146.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:26.824Z,1516680146.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:27.237Z,1516680147.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:27.631Z,1516680147.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.026Z,1516680148.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.424Z,1516680148.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.825Z,1516680148.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.825Z,1516680148.825 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-01-23T04:02:28.825Z,1516680148.825 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:02:28.827Z,1516680148.827 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.827Z,1516680148.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-01-23T04:02:28.827Z,1516680148.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:02:28.829Z,1516680148.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:28.829Z,1516680148.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16 2018-01-23T04:02:28.829Z,1516680148.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:02:28.841Z,1516680148.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:02:28.841Z,1516680148.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:02:28.841Z,1516680148.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:02:29.240Z,1516680149.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:02:29.240Z,1516680149.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-01-23T04:02:29.241Z,1516680149.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:02:29.241Z,1516680149.241 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-01-23T04:02:29.241Z,1516680149.241 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:02:29.241Z,1516680149.241 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16 2018-01-23T04:02:29.644Z,1516680149.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:02:29.651Z,1516680149.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:02:29.651Z,1516680149.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:02:29.652Z,1516680149.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:02:29.652Z,1516680149.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:02:29.652Z,1516680149.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:02:29.653Z,1516680149.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:02:29.653Z,1516680149.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:02:29.654Z,1516680149.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:02:30.040Z,1516680150.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:02:30.041Z,1516680150.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:30.435Z,1516680150.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:02:30.436Z,1516680150.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:30.839Z,1516680150.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:02:30.840Z,1516680150.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:31.240Z,1516680151.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:02:31.241Z,1516680151.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:31.641Z,1516680151.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:02:31.642Z,1516680151.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:32.040Z,1516680152.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:02:32.041Z,1516680152.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:32.435Z,1516680152.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:02:32.436Z,1516680152.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:32.836Z,1516680152.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:02:32.837Z,1516680152.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:33.245Z,1516680153.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:02:33.246Z,1516680153.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:33.638Z,1516680153.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:02:33.639Z,1516680153.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:34.038Z,1516680154.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:02:34.039Z,1516680154.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:34.419Z,1516680154.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:02:34.420Z,1516680154.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:34.820Z,1516680154.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:02:34.821Z,1516680154.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:35.241Z,1516680155.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:02:35.242Z,1516680155.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:35.625Z,1516680155.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:02:35.626Z,1516680155.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:36.028Z,1516680156.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:02:36.029Z,1516680156.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:36.417Z,1516680156.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:02:36.418Z,1516680156.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:36.820Z,1516680156.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:02:36.821Z,1516680156.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:37.228Z,1516680157.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:02:37.229Z,1516680157.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:37.628Z,1516680157.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:02:37.629Z,1516680157.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:38.027Z,1516680158.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:02:38.028Z,1516680158.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:38.418Z,1516680158.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:02:38.419Z,1516680158.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:38.818Z,1516680158.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:02:38.819Z,1516680158.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:39.227Z,1516680159.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:02:39.228Z,1516680159.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:39.630Z,1516680159.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:02:39.631Z,1516680159.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:40.029Z,1516680160.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:02:40.030Z,1516680160.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:40.425Z,1516680160.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:02:40.426Z,1516680160.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:40.818Z,1516680160.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:02:40.819Z,1516680160.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:41.226Z,1516680161.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:02:41.227Z,1516680161.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:41.630Z,1516680161.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:02:41.631Z,1516680161.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:42.026Z,1516680162.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:02:42.027Z,1516680162.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:42.419Z,1516680162.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:02:42.420Z,1516680162.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:42.821Z,1516680162.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:02:42.822Z,1516680162.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:43.228Z,1516680163.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:02:43.229Z,1516680163.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:43.622Z,1516680163.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:02:43.623Z,1516680163.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:44.032Z,1516680164.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:02:44.033Z,1516680164.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:44.421Z,1516680164.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:02:44.422Z,1516680164.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:44.817Z,1516680164.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:02:44.818Z,1516680164.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:45.227Z,1516680165.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:02:45.228Z,1516680165.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:45.630Z,1516680165.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:02:45.631Z,1516680165.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:46.025Z,1516680166.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:02:46.026Z,1516680166.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:46.418Z,1516680166.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:02:46.419Z,1516680166.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:46.818Z,1516680166.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:02:46.819Z,1516680166.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:47.225Z,1516680167.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:02:47.226Z,1516680167.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:47.629Z,1516680167.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:02:47.629Z,1516680167.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:48.025Z,1516680168.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:02:48.026Z,1516680168.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:48.421Z,1516680168.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:02:48.422Z,1516680168.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:48.820Z,1516680168.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:02:48.821Z,1516680168.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:49.225Z,1516680169.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:49.630Z,1516680169.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:50.026Z,1516680170.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:50.417Z,1516680170.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:50.827Z,1516680170.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:51.227Z,1516680171.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:51.626Z,1516680171.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:52.026Z,1516680172.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:52.425Z,1516680172.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:52.820Z,1516680172.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:53.216Z,1516680173.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:53.626Z,1516680173.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:54.034Z,1516680174.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:54.437Z,1516680174.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:54.818Z,1516680174.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:55.217Z,1516680175.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:55.623Z,1516680175.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:56.029Z,1516680176.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:56.427Z,1516680176.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:56.834Z,1516680176.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:57.227Z,1516680177.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:57.621Z,1516680177.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:58.027Z,1516680178.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:58.428Z,1516680178.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:58.806Z,1516680178.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:59.231Z,1516680179.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:02:59.636Z,1516680179.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:00.029Z,1516680180.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:00.429Z,1516680180.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:00.833Z,1516680180.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:01.205Z,1516680181.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:01.608Z,1516680181.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:02.015Z,1516680182.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:02.442Z,1516680182.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:02.843Z,1516680182.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:03.246Z,1516680183.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:03.612Z,1516680183.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:04.021Z,1516680184.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:04.420Z,1516680184.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:04.817Z,1516680184.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:05.216Z,1516680185.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:05.622Z,1516680185.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:06.022Z,1516680186.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:06.441Z,1516680186.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:06.820Z,1516680186.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:07.216Z,1516680187.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:07.621Z,1516680187.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:08.020Z,1516680188.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:08.418Z,1516680188.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:08.822Z,1516680188.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:09.243Z,1516680189.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:09.614Z,1516680189.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:10.014Z,1516680190.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:10.415Z,1516680190.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:10.820Z,1516680190.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:11.227Z,1516680191.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:11.627Z,1516680191.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:12.037Z,1516680192.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:12.433Z,1516680192.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:12.823Z,1516680192.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:13.219Z,1516680193.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:13.628Z,1516680193.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:14.021Z,1516680194.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:14.429Z,1516680194.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:14.830Z,1516680194.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:15.228Z,1516680195.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:15.618Z,1516680195.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:16.026Z,1516680196.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:16.424Z,1516680196.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:16.824Z,1516680196.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:17.219Z,1516680197.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:17.630Z,1516680197.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:18.037Z,1516680198.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:18.433Z,1516680198.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:18.827Z,1516680198.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:19.219Z,1516680199.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:19.628Z,1516680199.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:20.026Z,1516680200.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:23.122Z,1516680203.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:23.265Z,1516680203.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:23.613Z,1516680203.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:24.017Z,1516680204.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:24.409Z,1516680204.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:24.820Z,1516680204.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:25.191Z,1516680205.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:25.597Z,1516680205.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:25.997Z,1516680205.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:26.417Z,1516680206.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:26.792Z,1516680206.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:27.189Z,1516680207.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:27.593Z,1516680207.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:27.989Z,1516680207.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:28.398Z,1516680208.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:28.799Z,1516680208.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:29.195Z,1516680209.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:29.588Z,1516680209.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:29.988Z,1516680209.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:30.388Z,1516680210.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:30.793Z,1516680210.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:31.187Z,1516680211.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:31.597Z,1516680211.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:32.004Z,1516680212.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:32.408Z,1516680212.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:32.789Z,1516680212.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:33.186Z,1516680213.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:33.588Z,1516680213.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:33.996Z,1516680213.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:34.401Z,1516680214.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:34.797Z,1516680214.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:35.197Z,1516680215.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:35.589Z,1516680215.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:35.988Z,1516680215.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:36.386Z,1516680216.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:36.802Z,1516680216.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:37.192Z,1516680217.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:37.597Z,1516680217.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:37.998Z,1516680217.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:38.406Z,1516680218.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:38.791Z,1516680218.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:39.198Z,1516680219.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:39.596Z,1516680219.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:39.989Z,1516680219.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:40.408Z,1516680220.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:40.800Z,1516680220.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:41.197Z,1516680221.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:41.589Z,1516680221.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:41.992Z,1516680221.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:42.393Z,1516680222.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:42.792Z,1516680222.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:43.198Z,1516680223.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:43.600Z,1516680223.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:44.002Z,1516680224.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:44.404Z,1516680224.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:44.797Z,1516680224.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:45.195Z,1516680225.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:45.595Z,1516680225.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:45.985Z,1516680225.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:46.400Z,1516680226.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:46.811Z,1516680226.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:47.208Z,1516680227.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:47.595Z,1516680227.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:48.003Z,1516680228.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:48.377Z,1516680228.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:48.808Z,1516680228.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:49.187Z,1516680229.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:49.590Z,1516680229.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:50.016Z,1516680230.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:50.393Z,1516680230.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:50.786Z,1516680230.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:51.186Z,1516680231.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:51.592Z,1516680231.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:51.992Z,1516680231.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:52.390Z,1516680232.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:52.793Z,1516680232.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:53.197Z,1516680233.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:53.589Z,1516680233.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:53.998Z,1516680233.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:54.397Z,1516680234.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:54.791Z,1516680234.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:55.199Z,1516680235.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:55.605Z,1516680235.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:56.002Z,1516680236.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:56.413Z,1516680236.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:56.800Z,1516680236.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:57.197Z,1516680237.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:57.592Z,1516680237.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:57.996Z,1516680237.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:58.408Z,1516680238.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:58.807Z,1516680238.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:59.206Z,1516680239.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:03:59.597Z,1516680239.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:00.010Z,1516680240.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:00.377Z,1516680240.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:00.780Z,1516680240.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:01.187Z,1516680241.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:01.590Z,1516680241.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:02.017Z,1516680242.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:02.414Z,1516680242.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:02.788Z,1516680242.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:03.197Z,1516680243.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:03.592Z,1516680243.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:03.988Z,1516680243.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:04.405Z,1516680244.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:04.798Z,1516680244.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:05.197Z,1516680245.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:05.591Z,1516680245.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:05.993Z,1516680245.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:06.408Z,1516680246.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:06.801Z,1516680246.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:07.205Z,1516680247.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:07.592Z,1516680247.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:07.989Z,1516680247.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:08.404Z,1516680248.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:08.797Z,1516680248.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:09.198Z,1516680249.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:09.596Z,1516680249.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:09.993Z,1516680249.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:10.401Z,1516680250.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:10.802Z,1516680250.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:11.202Z,1516680251.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:11.589Z,1516680251.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:11.603Z,1516680251.603 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:04:11.998Z,1516680251.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:12.408Z,1516680252.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:12.803Z,1516680252.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:13.204Z,1516680253.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:13.594Z,1516680253.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:13.999Z,1516680253.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:14.402Z,1516680254.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:14.806Z,1516680254.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:15.198Z,1516680255.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:15.600Z,1516680255.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:15.997Z,1516680255.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:16.401Z,1516680256.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:16.802Z,1516680256.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:17.201Z,1516680257.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:17.599Z,1516680257.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:18.000Z,1516680258.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:18.407Z,1516680258.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:18.802Z,1516680258.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:19.208Z,1516680259.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:19.212Z,1516680259.212 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T03:59:18.0Z 2018-01-23T04:04:19.212Z,1516680259.212 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:04:19.212Z,1516680259.212 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:04:19.592Z,1516680259.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:20.146Z,1516680260.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:20.424Z,1516680260.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:23.503Z,1516680263.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:23.579Z,1516680263.579 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0020.lzma 2018-01-23T04:04:23.650Z,1516680263.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:23.966Z,1516680263.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:24.325Z,1516680264.325 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0020.lzma.bak 2018-01-23T04:04:24.325Z,1516680264.325 [DataOverHttps](INFO): SBD MOMSN=7754962 2018-01-23T04:04:24.380Z,1516680264.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:25.009Z,1516680265.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:25.195Z,1516680265.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:28.314Z,1516680268.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:28.465Z,1516680268.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:28.800Z,1516680268.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:29.205Z,1516680269.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:29.580Z,1516680269.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:29.985Z,1516680269.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:33.111Z,1516680273.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:33.166Z,1516680273.166 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0021.lzma 2018-01-23T04:04:33.248Z,1516680273.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:33.606Z,1516680273.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:33.933Z,1516680273.933 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0021.lzma.bak 2018-01-23T04:04:33.933Z,1516680273.933 [DataOverHttps](INFO): SBD MOMSN=7754964 2018-01-23T04:04:33.987Z,1516680273.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:34.610Z,1516680274.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:34.613Z,1516680274.613 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:04:34.613Z,1516680274.613 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:04:34.613Z,1516680274.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:04:34.800Z,1516680274.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:37.886Z,1516680277.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:38.051Z,1516680278.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:38.410Z,1516680278.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:38.788Z,1516680278.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:39.177Z,1516680279.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:39.589Z,1516680279.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:39.987Z,1516680279.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:40.414Z,1516680280.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:40.790Z,1516680280.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:41.213Z,1516680281.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:41.583Z,1516680281.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:41.985Z,1516680281.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:42.385Z,1516680282.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:42.797Z,1516680282.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:43.197Z,1516680283.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:43.594Z,1516680283.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:43.984Z,1516680283.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:44.392Z,1516680284.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:44.785Z,1516680284.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:45.182Z,1516680285.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:45.594Z,1516680285.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:46.001Z,1516680286.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:46.395Z,1516680286.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:46.797Z,1516680286.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:47.193Z,1516680287.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:47.589Z,1516680287.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:47.991Z,1516680287.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:48.392Z,1516680288.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:48.798Z,1516680288.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:49.198Z,1516680289.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:49.593Z,1516680289.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:49.989Z,1516680289.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:50.389Z,1516680290.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:50.792Z,1516680290.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:51.181Z,1516680291.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:51.594Z,1516680291.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:51.998Z,1516680291.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:52.396Z,1516680292.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:52.791Z,1516680292.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:53.197Z,1516680293.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:53.581Z,1516680293.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:53.992Z,1516680293.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:54.375Z,1516680294.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:54.802Z,1516680294.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:55.213Z,1516680295.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:55.608Z,1516680295.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:55.976Z,1516680295.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:56.467Z,1516680296.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:56.812Z,1516680296.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:57.174Z,1516680297.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:57.602Z,1516680297.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:58.016Z,1516680298.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:58.402Z,1516680298.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:58.780Z,1516680298.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:59.186Z,1516680299.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:59.577Z,1516680299.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:04:59.985Z,1516680299.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:00.396Z,1516680300.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:00.788Z,1516680300.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:01.194Z,1516680301.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:01.591Z,1516680301.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:02.002Z,1516680302.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:02.387Z,1516680302.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:02.797Z,1516680302.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:03.189Z,1516680303.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:03.594Z,1516680303.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:04.001Z,1516680304.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:04.395Z,1516680304.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:04.791Z,1516680304.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:05.193Z,1516680305.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:05.591Z,1516680305.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:05.991Z,1516680305.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:06.393Z,1516680306.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:06.804Z,1516680306.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:07.198Z,1516680307.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:07.601Z,1516680307.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:07.989Z,1516680307.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:08.391Z,1516680308.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:08.788Z,1516680308.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:09.191Z,1516680309.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:09.594Z,1516680309.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:10.003Z,1516680310.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:10.394Z,1516680310.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:10.793Z,1516680310.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:11.197Z,1516680311.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:11.595Z,1516680311.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:11.992Z,1516680311.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:12.397Z,1516680312.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:12.799Z,1516680312.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:13.201Z,1516680313.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:13.607Z,1516680313.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:14.004Z,1516680314.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:14.376Z,1516680314.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:14.781Z,1516680314.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:15.181Z,1516680315.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:15.612Z,1516680315.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:16.008Z,1516680316.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:16.406Z,1516680316.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:16.809Z,1516680316.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:17.185Z,1516680317.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:17.612Z,1516680317.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:17.997Z,1516680317.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:18.392Z,1516680318.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:18.809Z,1516680318.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:19.245Z,1516680319.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:19.648Z,1516680319.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:20.041Z,1516680320.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:20.404Z,1516680320.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:20.776Z,1516680320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:21.210Z,1516680321.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:21.624Z,1516680321.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:21.990Z,1516680321.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:22.414Z,1516680322.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:22.819Z,1516680322.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:23.194Z,1516680323.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:23.601Z,1516680323.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:24.025Z,1516680324.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:24.412Z,1516680324.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:24.828Z,1516680324.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:25.243Z,1516680325.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:25.685Z,1516680325.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:25.996Z,1516680325.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:26.406Z,1516680326.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:26.813Z,1516680326.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:27.201Z,1516680327.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:27.602Z,1516680327.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:28.007Z,1516680328.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:28.403Z,1516680328.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:28.805Z,1516680328.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:29.211Z,1516680329.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:29.605Z,1516680329.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:29.988Z,1516680329.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:29.988Z,1516680329.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-01-23T04:05:29.988Z,1516680329.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:05:29.990Z,1516680329.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:29.990Z,1516680329.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-01-23T04:05:29.990Z,1516680329.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:05:30.008Z,1516680330.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:30.008Z,1516680330.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17 2018-01-23T04:05:30.008Z,1516680330.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:05:30.028Z,1516680330.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:05:30.028Z,1516680330.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:05:30.029Z,1516680330.029 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:05:30.392Z,1516680330.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:05:30.392Z,1516680330.392 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-01-23T04:05:30.393Z,1516680330.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:05:30.393Z,1516680330.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-01-23T04:05:30.393Z,1516680330.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:05:30.393Z,1516680330.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17 2018-01-23T04:05:30.792Z,1516680330.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:05:30.792Z,1516680330.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:05:30.792Z,1516680330.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:05:30.793Z,1516680330.793 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:05:30.793Z,1516680330.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:05:30.794Z,1516680330.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:05:30.794Z,1516680330.794 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:05:30.794Z,1516680330.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:05:30.795Z,1516680330.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:05:31.200Z,1516680331.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:05:31.201Z,1516680331.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:31.600Z,1516680331.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:05:31.601Z,1516680331.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:31.985Z,1516680331.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:05:31.985Z,1516680331.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:32.386Z,1516680332.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:05:32.391Z,1516680332.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:32.784Z,1516680332.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:05:32.785Z,1516680332.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:33.184Z,1516680333.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:05:33.185Z,1516680333.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:33.593Z,1516680333.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:05:33.594Z,1516680333.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:34.000Z,1516680334.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:05:34.001Z,1516680334.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:34.400Z,1516680334.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:05:34.401Z,1516680334.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:34.785Z,1516680334.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:05:34.786Z,1516680334.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:35.191Z,1516680335.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:05:35.192Z,1516680335.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:38.283Z,1516680338.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T04:05:38.284Z,1516680338.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:38.428Z,1516680338.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:05:38.429Z,1516680338.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:38.775Z,1516680338.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:05:38.776Z,1516680338.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:39.184Z,1516680339.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:05:39.185Z,1516680339.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:39.562Z,1516680339.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:05:39.571Z,1516680339.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:39.951Z,1516680339.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:05:39.952Z,1516680339.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:40.350Z,1516680340.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:05:40.352Z,1516680340.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:40.750Z,1516680340.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:05:40.755Z,1516680340.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:41.159Z,1516680341.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:05:41.160Z,1516680341.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:41.558Z,1516680341.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:05:41.559Z,1516680341.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:41.969Z,1516680341.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:05:41.970Z,1516680341.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:42.357Z,1516680342.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:05:42.358Z,1516680342.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:42.745Z,1516680342.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:05:42.746Z,1516680342.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:43.209Z,1516680343.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:05:43.210Z,1516680343.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:43.544Z,1516680343.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:05:43.545Z,1516680343.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:43.966Z,1516680343.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:05:43.968Z,1516680343.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:44.352Z,1516680344.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:05:44.353Z,1516680344.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:44.757Z,1516680344.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:05:44.758Z,1516680344.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:45.157Z,1516680345.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:05:45.158Z,1516680345.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:45.558Z,1516680345.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:05:45.559Z,1516680345.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:45.955Z,1516680345.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:05:45.956Z,1516680345.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:46.345Z,1516680346.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:05:46.346Z,1516680346.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:46.745Z,1516680346.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:05:46.745Z,1516680346.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:47.152Z,1516680347.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:05:47.153Z,1516680347.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:47.558Z,1516680347.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:05:47.559Z,1516680347.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:47.968Z,1516680347.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:05:47.969Z,1516680347.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:48.384Z,1516680348.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:05:48.385Z,1516680348.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:48.763Z,1516680348.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:05:48.764Z,1516680348.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:49.166Z,1516680349.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:05:49.167Z,1516680349.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:49.564Z,1516680349.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:05:49.565Z,1516680349.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:49.944Z,1516680349.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:05:49.945Z,1516680349.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:50.373Z,1516680350.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:50.778Z,1516680350.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:51.182Z,1516680351.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:51.566Z,1516680351.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:51.956Z,1516680351.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:52.354Z,1516680352.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:52.756Z,1516680352.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:53.168Z,1516680353.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:53.564Z,1516680353.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:53.973Z,1516680353.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:54.363Z,1516680354.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:54.769Z,1516680354.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:55.165Z,1516680355.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:55.577Z,1516680355.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:55.969Z,1516680355.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:56.373Z,1516680356.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:56.757Z,1516680356.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:57.143Z,1516680357.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:57.571Z,1516680357.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:57.975Z,1516680357.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:58.381Z,1516680358.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:58.757Z,1516680358.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:59.153Z,1516680359.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:59.554Z,1516680359.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:05:59.980Z,1516680359.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:00.354Z,1516680360.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:00.751Z,1516680360.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:01.157Z,1516680361.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:01.561Z,1516680361.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:01.961Z,1516680361.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:02.361Z,1516680362.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:02.761Z,1516680362.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:03.155Z,1516680363.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:03.558Z,1516680363.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:03.965Z,1516680363.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:04.357Z,1516680364.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:04.753Z,1516680364.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:05.151Z,1516680365.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:05.557Z,1516680365.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:05.958Z,1516680365.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:06.361Z,1516680366.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:06.755Z,1516680366.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:07.154Z,1516680367.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:07.561Z,1516680367.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:07.961Z,1516680367.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:08.358Z,1516680368.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:08.753Z,1516680368.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:09.151Z,1516680369.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:09.558Z,1516680369.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:09.958Z,1516680369.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:10.357Z,1516680370.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:10.753Z,1516680370.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:11.151Z,1516680371.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:11.564Z,1516680371.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:11.962Z,1516680371.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:12.370Z,1516680372.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:12.756Z,1516680372.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:13.161Z,1516680373.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:13.561Z,1516680373.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:13.965Z,1516680373.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:14.365Z,1516680374.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:14.752Z,1516680374.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:15.156Z,1516680375.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:15.565Z,1516680375.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:15.965Z,1516680375.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:16.362Z,1516680376.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:16.756Z,1516680376.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:17.150Z,1516680377.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:17.568Z,1516680377.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:17.965Z,1516680377.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:18.365Z,1516680378.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:18.752Z,1516680378.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:19.151Z,1516680379.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:19.569Z,1516680379.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:19.964Z,1516680379.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:20.361Z,1516680380.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:20.753Z,1516680380.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:21.156Z,1516680381.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:21.573Z,1516680381.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:21.965Z,1516680381.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:22.368Z,1516680382.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:22.756Z,1516680382.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:23.153Z,1516680383.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:23.562Z,1516680383.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:23.969Z,1516680383.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:24.369Z,1516680384.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:24.756Z,1516680384.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:25.161Z,1516680385.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:25.561Z,1516680385.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:25.968Z,1516680385.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:26.361Z,1516680386.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:26.753Z,1516680386.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:27.156Z,1516680387.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:27.565Z,1516680387.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:27.969Z,1516680387.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:28.363Z,1516680388.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:28.757Z,1516680388.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:29.154Z,1516680389.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:29.564Z,1516680389.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:29.966Z,1516680389.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:30.365Z,1516680390.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:30.754Z,1516680390.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:31.154Z,1516680391.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:31.564Z,1516680391.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:31.965Z,1516680391.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:32.363Z,1516680392.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:32.769Z,1516680392.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:33.159Z,1516680393.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:33.561Z,1516680393.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:33.963Z,1516680393.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:34.378Z,1516680394.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:34.768Z,1516680394.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:35.173Z,1516680395.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:35.572Z,1516680395.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:38.651Z,1516680398.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:38.781Z,1516680398.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:39.130Z,1516680399.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:39.530Z,1516680399.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:39.929Z,1516680399.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:40.333Z,1516680400.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:40.716Z,1516680400.716 [PNI_TCM](ERROR): CRC does not match. Expected:0x546 got:0x17072 2018-01-23T04:06:40.740Z,1516680400.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:41.125Z,1516680401.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:41.519Z,1516680401.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:41.930Z,1516680401.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:42.339Z,1516680402.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:42.732Z,1516680402.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:43.120Z,1516680403.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:43.541Z,1516680403.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:43.916Z,1516680403.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x32872 got:0x49796 2018-01-23T04:06:43.941Z,1516680403.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:44.323Z,1516680404.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:44.730Z,1516680404.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:45.133Z,1516680405.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:45.537Z,1516680405.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:45.929Z,1516680405.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:46.322Z,1516680406.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:46.727Z,1516680406.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:47.125Z,1516680407.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:47.530Z,1516680407.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:47.931Z,1516680407.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:48.349Z,1516680408.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:48.728Z,1516680408.728 [PNI_TCM](ERROR): CRC does not match. Expected:0x33369 got:0x45000 2018-01-23T04:06:48.768Z,1516680408.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:49.122Z,1516680409.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:49.520Z,1516680409.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:49.934Z,1516680409.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:50.323Z,1516680410.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:50.740Z,1516680410.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:51.136Z,1516680411.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:51.535Z,1516680411.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:51.924Z,1516680411.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:52.321Z,1516680412.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:52.722Z,1516680412.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:53.136Z,1516680413.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:53.525Z,1516680413.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:53.941Z,1516680413.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:54.341Z,1516680414.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:54.748Z,1516680414.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:55.125Z,1516680415.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:55.525Z,1516680415.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:55.930Z,1516680415.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:56.328Z,1516680416.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:56.737Z,1516680416.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:57.138Z,1516680417.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:57.531Z,1516680417.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:57.929Z,1516680417.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:58.335Z,1516680418.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:58.732Z,1516680418.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:59.121Z,1516680419.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:59.531Z,1516680419.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:06:59.940Z,1516680419.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:00.344Z,1516680420.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:00.731Z,1516680420.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:01.132Z,1516680421.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:01.534Z,1516680421.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:01.908Z,1516680421.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:02.307Z,1516680422.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:02.735Z,1516680422.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:03.145Z,1516680423.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:03.544Z,1516680423.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:03.914Z,1516680423.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:04.313Z,1516680424.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:04.732Z,1516680424.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:05.113Z,1516680425.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:05.517Z,1516680425.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:05.922Z,1516680425.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:06.318Z,1516680426.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:06.748Z,1516680426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:07.125Z,1516680427.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:07.518Z,1516680427.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:07.925Z,1516680427.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:08.334Z,1516680428.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:08.738Z,1516680428.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:09.132Z,1516680429.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:09.544Z,1516680429.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:09.929Z,1516680429.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:10.318Z,1516680430.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:10.722Z,1516680430.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:11.118Z,1516680431.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:11.520Z,1516680431.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:11.942Z,1516680431.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:12.337Z,1516680432.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:12.733Z,1516680432.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:13.137Z,1516680433.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:13.506Z,1516680433.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:13.909Z,1516680433.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:14.311Z,1516680434.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:14.746Z,1516680434.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:15.147Z,1516680435.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:15.548Z,1516680435.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:15.916Z,1516680435.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:16.314Z,1516680436.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:16.715Z,1516680436.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:17.117Z,1516680437.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:17.515Z,1516680437.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:17.928Z,1516680437.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:18.325Z,1516680438.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:18.729Z,1516680438.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:19.120Z,1516680439.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:19.514Z,1516680439.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:19.918Z,1516680439.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:20.314Z,1516680440.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:20.725Z,1516680440.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:21.128Z,1516680441.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:21.526Z,1516680441.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:21.917Z,1516680441.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:22.328Z,1516680442.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:22.719Z,1516680442.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:23.120Z,1516680443.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:23.517Z,1516680443.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:23.926Z,1516680443.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:24.325Z,1516680444.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:24.733Z,1516680444.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:25.123Z,1516680445.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:25.513Z,1516680445.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:25.919Z,1516680445.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:26.327Z,1516680446.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:26.730Z,1516680446.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:27.133Z,1516680447.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:27.530Z,1516680447.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:27.925Z,1516680447.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:28.327Z,1516680448.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:28.728Z,1516680448.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:29.126Z,1516680449.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:29.527Z,1516680449.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:29.937Z,1516680449.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:30.335Z,1516680450.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:30.735Z,1516680450.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:31.128Z,1516680451.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:31.505Z,1516680451.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:31.908Z,1516680451.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:32.312Z,1516680452.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:32.734Z,1516680452.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:33.145Z,1516680453.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:33.544Z,1516680453.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:33.941Z,1516680453.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:34.341Z,1516680454.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:34.716Z,1516680454.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:35.117Z,1516680455.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:35.515Z,1516680455.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:35.949Z,1516680455.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:39.024Z,1516680459.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:39.179Z,1516680459.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:39.520Z,1516680459.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:39.921Z,1516680459.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:40.314Z,1516680460.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:40.724Z,1516680460.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:41.125Z,1516680461.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:41.522Z,1516680461.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:41.918Z,1516680461.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:42.315Z,1516680462.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:42.725Z,1516680462.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:43.122Z,1516680463.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:43.522Z,1516680463.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:43.921Z,1516680463.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:44.317Z,1516680464.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:44.722Z,1516680464.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:45.122Z,1516680465.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:45.534Z,1516680465.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:45.929Z,1516680465.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:46.327Z,1516680466.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:46.720Z,1516680466.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:47.121Z,1516680467.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:47.519Z,1516680467.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:47.876Z,1516680467.876 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T04:07:47.876Z,1516680467.876 [NAL9602] Data Fault, FailCount= 5 2018-01-23T04:07:47.876Z,1516680467.876 [NAL9602](ERROR): Data Fault 2018-01-23T04:07:47.937Z,1516680467.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:47.967Z,1516680467.967 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T04:07:47.967Z,1516680467.967 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T04:07:48.276Z,1516680468.276 [NAL9602](INFO): Powering down 2018-01-23T04:07:48.327Z,1516680468.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:48.339Z,1516680468.339 [CBIT](INFO): Critical error at 20180123T040747 2018-01-23T04:07:48.729Z,1516680468.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:49.129Z,1516680469.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:49.521Z,1516680469.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:49.921Z,1516680469.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:50.321Z,1516680470.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:50.721Z,1516680470.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:51.123Z,1516680471.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:51.523Z,1516680471.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:51.925Z,1516680471.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:52.324Z,1516680472.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:52.721Z,1516680472.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:53.124Z,1516680473.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:53.512Z,1516680473.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:53.906Z,1516680473.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:54.306Z,1516680474.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:54.706Z,1516680474.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:55.139Z,1516680475.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:55.510Z,1516680475.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:55.911Z,1516680475.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:56.319Z,1516680476.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:56.712Z,1516680476.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:57.111Z,1516680477.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:57.513Z,1516680477.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:57.912Z,1516680477.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:58.309Z,1516680478.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:58.719Z,1516680478.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:59.113Z,1516680479.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:59.520Z,1516680479.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:07:59.916Z,1516680479.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:00.324Z,1516680480.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:00.718Z,1516680480.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:01.123Z,1516680481.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:01.524Z,1516680481.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:01.916Z,1516680481.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:02.323Z,1516680482.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:02.724Z,1516680482.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:03.120Z,1516680483.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:03.520Z,1516680483.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:03.917Z,1516680483.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:04.316Z,1516680484.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:04.720Z,1516680484.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:05.123Z,1516680485.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:05.512Z,1516680485.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:05.915Z,1516680485.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:06.333Z,1516680486.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:06.710Z,1516680486.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:07.107Z,1516680487.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:07.511Z,1516680487.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:07.914Z,1516680487.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:08.314Z,1516680488.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:08.714Z,1516680488.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:09.107Z,1516680489.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:09.518Z,1516680489.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:09.912Z,1516680489.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:10.309Z,1516680490.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:10.714Z,1516680490.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:11.112Z,1516680491.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:11.511Z,1516680491.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:11.913Z,1516680491.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:12.320Z,1516680492.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:12.713Z,1516680492.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:13.113Z,1516680493.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:13.516Z,1516680493.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:13.913Z,1516680493.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:14.313Z,1516680494.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:14.712Z,1516680494.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:15.144Z,1516680495.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:15.514Z,1516680495.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:15.917Z,1516680495.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:16.311Z,1516680496.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:16.714Z,1516680496.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:17.112Z,1516680497.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:17.511Z,1516680497.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:17.913Z,1516680497.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:18.316Z,1516680498.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:18.714Z,1516680498.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:19.115Z,1516680499.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:19.520Z,1516680499.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:19.915Z,1516680499.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:20.314Z,1516680500.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:20.713Z,1516680500.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:21.112Z,1516680501.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:21.522Z,1516680501.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:21.914Z,1516680501.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:22.314Z,1516680502.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:22.716Z,1516680502.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:23.115Z,1516680503.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:23.514Z,1516680503.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:23.925Z,1516680503.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:24.317Z,1516680504.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:24.713Z,1516680504.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:25.115Z,1516680505.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:25.517Z,1516680505.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:25.915Z,1516680505.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:26.316Z,1516680506.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:26.714Z,1516680506.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:27.112Z,1516680507.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:27.514Z,1516680507.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:27.914Z,1516680507.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:28.315Z,1516680508.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:28.714Z,1516680508.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:29.117Z,1516680509.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:29.512Z,1516680509.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:29.914Z,1516680509.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:30.314Z,1516680510.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:30.715Z,1516680510.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:31.115Z,1516680511.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:31.115Z,1516680511.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-01-23T04:08:31.115Z,1516680511.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:08:31.117Z,1516680511.117 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:31.117Z,1516680511.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-01-23T04:08:31.117Z,1516680511.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:08:31.118Z,1516680511.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:31.119Z,1516680511.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18 2018-01-23T04:08:31.119Z,1516680511.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:08:31.130Z,1516680511.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:08:31.130Z,1516680511.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:08:31.147Z,1516680511.147 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:08:31.558Z,1516680511.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:08:31.558Z,1516680511.558 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-01-23T04:08:31.559Z,1516680511.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:08:31.559Z,1516680511.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-01-23T04:08:31.560Z,1516680511.560 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:08:31.560Z,1516680511.560 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18 2018-01-23T04:08:31.916Z,1516680511.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:08:31.917Z,1516680511.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:08:31.917Z,1516680511.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:08:31.918Z,1516680511.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:08:31.918Z,1516680511.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:08:31.918Z,1516680511.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:08:31.919Z,1516680511.919 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:08:31.919Z,1516680511.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:08:31.920Z,1516680511.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:08:32.313Z,1516680512.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:08:32.314Z,1516680512.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:32.720Z,1516680512.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:08:32.721Z,1516680512.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:33.120Z,1516680513.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:08:33.121Z,1516680513.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:33.515Z,1516680513.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:08:33.516Z,1516680513.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:33.916Z,1516680513.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:08:33.917Z,1516680513.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:34.316Z,1516680514.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:08:34.317Z,1516680514.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:34.724Z,1516680514.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:08:34.725Z,1516680514.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:35.124Z,1516680515.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:08:35.125Z,1516680515.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:35.511Z,1516680515.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:08:35.512Z,1516680515.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:35.925Z,1516680515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:08:35.926Z,1516680515.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:36.327Z,1516680516.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:08:36.328Z,1516680516.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:39.425Z,1516680519.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T04:08:39.426Z,1516680519.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:39.562Z,1516680519.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:08:39.563Z,1516680519.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:39.890Z,1516680519.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:08:39.891Z,1516680519.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:40.300Z,1516680520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:08:40.301Z,1516680520.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:40.687Z,1516680520.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:08:40.688Z,1516680520.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:41.090Z,1516680521.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:08:41.091Z,1516680521.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:41.492Z,1516680521.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:08:41.493Z,1516680521.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:41.891Z,1516680521.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:08:41.892Z,1516680521.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:42.289Z,1516680522.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:08:42.290Z,1516680522.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:42.688Z,1516680522.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:08:42.689Z,1516680522.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:43.087Z,1516680523.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:08:43.088Z,1516680523.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:43.497Z,1516680523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:08:43.498Z,1516680523.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:43.900Z,1516680523.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:08:43.901Z,1516680523.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:44.300Z,1516680524.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:08:44.301Z,1516680524.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:44.698Z,1516680524.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:08:44.699Z,1516680524.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:45.100Z,1516680525.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:08:45.101Z,1516680525.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:45.487Z,1516680525.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:08:45.488Z,1516680525.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:45.898Z,1516680525.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:08:45.903Z,1516680525.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:46.282Z,1516680526.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:08:46.307Z,1516680526.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:46.679Z,1516680526.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:08:46.680Z,1516680526.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:47.082Z,1516680527.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:08:47.083Z,1516680527.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:47.485Z,1516680527.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:08:47.487Z,1516680527.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:47.886Z,1516680527.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:08:47.887Z,1516680527.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:48.294Z,1516680528.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:08:48.295Z,1516680528.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:48.688Z,1516680528.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:08:48.689Z,1516680528.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:49.085Z,1516680529.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:08:49.086Z,1516680529.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:49.490Z,1516680529.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:08:49.495Z,1516680529.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:49.895Z,1516680529.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:08:49.896Z,1516680529.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:50.287Z,1516680530.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:08:50.288Z,1516680530.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:50.688Z,1516680530.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:08:50.689Z,1516680530.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:51.088Z,1516680531.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:08:51.089Z,1516680531.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:51.487Z,1516680531.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:51.897Z,1516680531.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:52.296Z,1516680532.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:52.688Z,1516680532.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:53.091Z,1516680533.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:53.489Z,1516680533.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:53.890Z,1516680533.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:54.291Z,1516680534.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:54.693Z,1516680534.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:55.088Z,1516680535.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:55.492Z,1516680535.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:55.889Z,1516680535.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:56.291Z,1516680536.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:56.701Z,1516680536.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:57.090Z,1516680537.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:57.489Z,1516680537.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:57.892Z,1516680537.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:58.292Z,1516680538.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:58.698Z,1516680538.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:59.092Z,1516680539.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:59.502Z,1516680539.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:08:59.895Z,1516680539.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:00.301Z,1516680540.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:00.697Z,1516680540.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:01.100Z,1516680541.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:01.510Z,1516680541.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:01.882Z,1516680541.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:02.281Z,1516680542.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:02.686Z,1516680542.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:03.087Z,1516680543.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:03.484Z,1516680543.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:03.894Z,1516680543.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:04.292Z,1516680544.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:04.687Z,1516680544.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:05.089Z,1516680545.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:05.498Z,1516680545.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:05.889Z,1516680545.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:06.297Z,1516680546.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:06.687Z,1516680546.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:07.087Z,1516680547.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:07.496Z,1516680547.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:07.892Z,1516680547.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:08.286Z,1516680548.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:08.696Z,1516680548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:09.097Z,1516680549.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:09.486Z,1516680549.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:09.896Z,1516680549.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:10.289Z,1516680550.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:10.686Z,1516680550.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:11.096Z,1516680551.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:11.488Z,1516680551.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:11.895Z,1516680551.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:12.288Z,1516680552.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:12.698Z,1516680552.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:13.087Z,1516680553.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:13.489Z,1516680553.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:13.891Z,1516680553.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:14.287Z,1516680554.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:14.700Z,1516680554.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:15.088Z,1516680555.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:15.489Z,1516680555.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:15.892Z,1516680555.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:16.288Z,1516680556.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:16.689Z,1516680556.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:17.089Z,1516680557.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:17.491Z,1516680557.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:17.891Z,1516680557.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:18.292Z,1516680558.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:18.688Z,1516680558.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:19.089Z,1516680559.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:19.489Z,1516680559.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:19.895Z,1516680559.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:20.287Z,1516680560.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:20.688Z,1516680560.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:21.089Z,1516680561.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:21.489Z,1516680561.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:21.897Z,1516680561.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:22.289Z,1516680562.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:22.687Z,1516680562.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:23.088Z,1516680563.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:23.493Z,1516680563.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:23.890Z,1516680563.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:24.289Z,1516680564.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:24.693Z,1516680564.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:25.087Z,1516680565.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:25.496Z,1516680565.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:25.894Z,1516680565.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:26.287Z,1516680566.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:26.700Z,1516680566.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:27.093Z,1516680567.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:27.490Z,1516680567.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:27.888Z,1516680567.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:28.293Z,1516680568.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:28.697Z,1516680568.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:29.097Z,1516680569.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:29.497Z,1516680569.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:29.894Z,1516680569.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:30.290Z,1516680570.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:30.705Z,1516680570.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:31.093Z,1516680571.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:31.496Z,1516680571.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:31.895Z,1516680571.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:32.290Z,1516680572.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:32.698Z,1516680572.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:33.093Z,1516680573.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:33.489Z,1516680573.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:33.896Z,1516680573.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:34.295Z,1516680574.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:34.690Z,1516680574.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:35.096Z,1516680575.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:35.099Z,1516680575.099 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T04:09:35.100Z,1516680575.100 [Default:CheckIn:C.Wait] Stopped 2018-01-23T04:09:35.100Z,1516680575.100 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T04:09:35.100Z,1516680575.100 [Default:CheckIn:D] Running Loop=1 2018-01-23T04:09:35.496Z,1516680575.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:35.508Z,1516680575.508 [Default:CheckIn:D] Stopped 2018-01-23T04:09:35.508Z,1516680575.508 [Default:CheckIn:E] Running Loop=1 2018-01-23T04:09:35.898Z,1516680575.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:35.906Z,1516680575.906 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.724129 min 2018-01-23T04:09:35.906Z,1516680575.906 [Default:CheckIn:E] Stopped 2018-01-23T04:09:35.906Z,1516680575.906 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T04:09:35.906Z,1516680575.906 [Default:CheckIn] Stopped 2018-01-23T04:09:35.906Z,1516680575.906 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T04:09:35.911Z,1516680575.911 [Default:CheckIn](INFO): Running loop #6 2018-01-23T04:09:35.911Z,1516680575.911 [Default:CheckIn] Running Loop=6 2018-01-23T04:09:35.911Z,1516680575.911 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T04:09:35.911Z,1516680575.911 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T04:09:36.300Z,1516680576.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:36.703Z,1516680576.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:39.774Z,1516680579.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:39.910Z,1516680579.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:40.266Z,1516680580.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:40.667Z,1516680580.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:41.072Z,1516680581.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:41.468Z,1516680581.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:41.869Z,1516680581.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:42.261Z,1516680582.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:42.673Z,1516680582.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:43.071Z,1516680583.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:43.461Z,1516680583.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:43.875Z,1516680583.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:44.276Z,1516680584.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:44.653Z,1516680584.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:45.055Z,1516680585.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:45.460Z,1516680585.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:45.859Z,1516680585.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:46.263Z,1516680586.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:46.663Z,1516680586.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:47.053Z,1516680587.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:47.464Z,1516680587.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:47.862Z,1516680587.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:47.907Z,1516680587.907 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T04:09:47.907Z,1516680587.907 [NAL9602] No Fault, FailCount= 5 2018-01-23T04:09:48.229Z,1516680588.229 [NAL9602](INFO): Powering up NAL9602 2018-01-23T04:09:48.285Z,1516680588.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:48.662Z,1516680588.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:49.055Z,1516680589.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:49.455Z,1516680589.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:49.867Z,1516680589.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:50.263Z,1516680590.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:50.659Z,1516680590.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:51.070Z,1516680591.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:51.461Z,1516680591.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:51.862Z,1516680591.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:52.268Z,1516680592.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:52.664Z,1516680592.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:53.059Z,1516680593.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:53.461Z,1516680593.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:53.869Z,1516680593.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:54.259Z,1516680594.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:54.661Z,1516680594.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:55.064Z,1516680595.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:55.459Z,1516680595.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:55.863Z,1516680595.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:56.264Z,1516680596.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:56.659Z,1516680596.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:57.072Z,1516680597.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:57.473Z,1516680597.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:57.860Z,1516680597.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:58.266Z,1516680598.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:58.694Z,1516680598.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:59.032Z,1516680599.032 [NAL9602](INFO): NAL9602 initialized 2018-01-23T04:09:59.064Z,1516680599.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:59.468Z,1516680599.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:09:59.894Z,1516680599.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:00.270Z,1516680600.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:00.692Z,1516680600.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:01.069Z,1516680601.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:01.463Z,1516680601.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:01.863Z,1516680601.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:02.289Z,1516680602.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:02.691Z,1516680602.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:03.065Z,1516680603.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:03.465Z,1516680603.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:03.866Z,1516680603.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:04.268Z,1516680604.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:04.673Z,1516680604.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:05.068Z,1516680605.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:05.473Z,1516680605.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:05.882Z,1516680605.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:06.267Z,1516680606.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:06.672Z,1516680606.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:07.067Z,1516680607.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:07.468Z,1516680607.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:07.872Z,1516680607.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:08.273Z,1516680608.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:08.674Z,1516680608.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:09.074Z,1516680609.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:09.472Z,1516680609.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:09.862Z,1516680609.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:10.286Z,1516680610.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:10.670Z,1516680610.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:11.082Z,1516680611.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:11.486Z,1516680611.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:11.885Z,1516680611.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:12.271Z,1516680612.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:12.684Z,1516680612.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:13.077Z,1516680613.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:13.472Z,1516680613.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:13.878Z,1516680613.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:14.283Z,1516680614.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:14.686Z,1516680614.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:15.077Z,1516680615.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:15.467Z,1516680615.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:15.869Z,1516680615.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:16.280Z,1516680616.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:16.685Z,1516680616.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:17.069Z,1516680617.069 [PNI_TCM](ERROR): CRC does not match. Expected:0x1533 got:0x49716 2018-01-23T04:10:17.100Z,1516680617.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:17.493Z,1516680617.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:17.882Z,1516680617.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:18.283Z,1516680618.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:18.651Z,1516680618.651 [PNI_TCM](ERROR): CRC does not match. Expected:0x64806 got:0x32285 2018-01-23T04:10:18.684Z,1516680618.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:19.056Z,1516680619.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:19.460Z,1516680619.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:19.888Z,1516680619.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:20.289Z,1516680620.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:20.686Z,1516680620.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:21.086Z,1516680621.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:21.486Z,1516680621.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:21.858Z,1516680621.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x59900 got:0x4730 2018-01-23T04:10:21.900Z,1516680621.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:22.293Z,1516680622.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:22.660Z,1516680622.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:23.092Z,1516680623.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:23.491Z,1516680623.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:23.887Z,1516680623.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:24.265Z,1516680624.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:24.673Z,1516680624.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:25.057Z,1516680625.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T04:10:25.088Z,1516680625.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:25.465Z,1516680625.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:25.885Z,1516680625.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:26.292Z,1516680626.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:26.669Z,1516680626.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x3912 got:0x49796 2018-01-23T04:10:26.691Z,1516680626.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:27.090Z,1516680627.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:27.468Z,1516680627.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:27.885Z,1516680627.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:28.267Z,1516680628.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:28.666Z,1516680628.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:29.068Z,1516680629.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:29.485Z,1516680629.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:29.872Z,1516680629.872 [PNI_TCM](ERROR): CRC does not match. Expected:0x55816 got:0x17072 2018-01-23T04:10:29.897Z,1516680629.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:30.265Z,1516680630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:30.667Z,1516680630.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:31.086Z,1516680631.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:31.467Z,1516680631.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:31.866Z,1516680631.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:32.273Z,1516680632.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:32.689Z,1516680632.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:33.069Z,1516680633.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:33.463Z,1516680633.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:33.865Z,1516680633.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:34.285Z,1516680634.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:34.672Z,1516680634.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:35.091Z,1516680635.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:35.493Z,1516680635.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:35.890Z,1516680635.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:36.293Z,1516680636.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:36.657Z,1516680636.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T04:10:36.688Z,1516680636.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:37.059Z,1516680637.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x10736 got:0x7234 2018-01-23T04:10:37.093Z,1516680637.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:40.161Z,1516680640.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:40.298Z,1516680640.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:40.673Z,1516680640.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:41.067Z,1516680641.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:41.462Z,1516680641.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:41.853Z,1516680641.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:42.253Z,1516680642.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:42.651Z,1516680642.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:43.057Z,1516680643.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:43.472Z,1516680643.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:43.865Z,1516680643.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:44.253Z,1516680644.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:44.657Z,1516680644.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:45.053Z,1516680645.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:45.448Z,1516680645.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:45.836Z,1516680645.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:46.258Z,1516680646.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:46.673Z,1516680646.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:47.062Z,1516680647.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:47.445Z,1516680647.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:47.846Z,1516680647.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:48.244Z,1516680648.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:48.667Z,1516680648.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:49.057Z,1516680649.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:49.454Z,1516680649.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:49.853Z,1516680649.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:50.245Z,1516680650.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:50.644Z,1516680650.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:51.046Z,1516680651.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:51.447Z,1516680651.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:51.849Z,1516680651.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:52.253Z,1516680652.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:52.658Z,1516680652.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:53.054Z,1516680653.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:53.449Z,1516680653.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:53.845Z,1516680653.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:54.256Z,1516680654.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:54.645Z,1516680654.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:55.054Z,1516680655.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:55.465Z,1516680655.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:55.856Z,1516680655.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:56.245Z,1516680656.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:56.648Z,1516680656.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:57.053Z,1516680657.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:57.446Z,1516680657.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:57.849Z,1516680657.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:58.254Z,1516680658.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:58.657Z,1516680658.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:59.061Z,1516680659.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:59.453Z,1516680659.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:10:59.846Z,1516680659.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:00.245Z,1516680660.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:00.645Z,1516680660.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:01.061Z,1516680661.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:01.457Z,1516680661.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:01.854Z,1516680661.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:02.250Z,1516680662.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:02.647Z,1516680662.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:03.052Z,1516680663.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:03.452Z,1516680663.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:03.856Z,1516680663.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:04.258Z,1516680664.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:04.657Z,1516680664.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:05.061Z,1516680665.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:05.451Z,1516680665.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:05.851Z,1516680665.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:06.255Z,1516680666.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:06.651Z,1516680666.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:07.055Z,1516680667.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:07.458Z,1516680667.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:07.854Z,1516680667.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:08.251Z,1516680668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:08.654Z,1516680668.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:09.057Z,1516680669.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:09.457Z,1516680669.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:09.863Z,1516680669.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:10.246Z,1516680670.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:10.651Z,1516680670.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:11.054Z,1516680671.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:11.457Z,1516680671.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:11.854Z,1516680671.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:12.255Z,1516680672.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:12.649Z,1516680672.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:13.054Z,1516680673.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:13.465Z,1516680673.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:13.858Z,1516680673.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:14.251Z,1516680674.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:14.652Z,1516680674.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:15.054Z,1516680675.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:15.458Z,1516680675.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:15.860Z,1516680675.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:16.256Z,1516680676.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:16.661Z,1516680676.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:17.067Z,1516680677.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:17.473Z,1516680677.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:17.873Z,1516680677.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:18.239Z,1516680678.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:18.649Z,1516680678.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:19.074Z,1516680679.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:19.453Z,1516680679.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:19.858Z,1516680679.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:20.247Z,1516680680.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:20.643Z,1516680680.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:21.050Z,1516680681.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:21.450Z,1516680681.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:21.850Z,1516680681.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:22.245Z,1516680682.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:22.643Z,1516680682.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:23.050Z,1516680683.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:23.462Z,1516680683.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:23.861Z,1516680683.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:24.250Z,1516680684.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:24.653Z,1516680684.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:25.061Z,1516680685.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:25.454Z,1516680685.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:25.853Z,1516680685.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:26.246Z,1516680686.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:26.656Z,1516680686.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:27.055Z,1516680687.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:27.459Z,1516680687.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:27.863Z,1516680687.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:28.248Z,1516680688.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:28.652Z,1516680688.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:29.061Z,1516680689.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:29.463Z,1516680689.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:29.858Z,1516680689.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:30.247Z,1516680690.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:30.652Z,1516680690.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:31.054Z,1516680691.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:31.465Z,1516680691.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:31.855Z,1516680691.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:32.252Z,1516680692.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:32.252Z,1516680692.252 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-01-23T04:11:32.252Z,1516680692.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:11:32.254Z,1516680692.254 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:32.254Z,1516680692.254 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-01-23T04:11:32.254Z,1516680692.254 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:11:32.256Z,1516680692.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:32.256Z,1516680692.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19 2018-01-23T04:11:32.256Z,1516680692.256 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:11:32.268Z,1516680692.268 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:11:32.268Z,1516680692.268 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:11:32.268Z,1516680692.268 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:11:32.669Z,1516680692.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:11:32.669Z,1516680692.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-01-23T04:11:32.670Z,1516680692.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:11:32.670Z,1516680692.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-01-23T04:11:32.671Z,1516680692.671 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:11:32.671Z,1516680692.671 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19 2018-01-23T04:11:33.056Z,1516680693.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:11:33.056Z,1516680693.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:11:33.056Z,1516680693.056 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:11:33.057Z,1516680693.057 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:11:33.057Z,1516680693.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:11:33.057Z,1516680693.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:11:33.058Z,1516680693.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:11:33.058Z,1516680693.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:11:33.059Z,1516680693.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:11:33.466Z,1516680693.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:11:33.467Z,1516680693.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:33.865Z,1516680693.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:11:33.865Z,1516680693.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:34.252Z,1516680694.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:11:34.253Z,1516680694.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:34.661Z,1516680694.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:11:34.662Z,1516680694.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:35.068Z,1516680695.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:11:35.069Z,1516680695.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:35.457Z,1516680695.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:11:35.458Z,1516680695.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:35.865Z,1516680695.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:11:35.866Z,1516680695.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:36.239Z,1516680696.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:11:36.240Z,1516680696.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:36.636Z,1516680696.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:11:36.637Z,1516680696.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:37.045Z,1516680697.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:11:37.046Z,1516680697.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:37.449Z,1516680697.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:11:37.450Z,1516680697.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:40.546Z,1516680700.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T04:11:40.548Z,1516680700.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:40.696Z,1516680700.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:11:40.697Z,1516680700.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:41.045Z,1516680701.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:11:41.046Z,1516680701.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:41.440Z,1516680701.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:11:41.441Z,1516680701.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:41.836Z,1516680701.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:11:41.837Z,1516680701.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:42.253Z,1516680702.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:11:42.254Z,1516680702.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:42.648Z,1516680702.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:11:42.649Z,1516680702.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:43.045Z,1516680703.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:11:43.046Z,1516680703.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:43.441Z,1516680703.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:11:43.442Z,1516680703.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:43.842Z,1516680703.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:11:43.842Z,1516680703.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:44.240Z,1516680704.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:11:44.241Z,1516680704.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:44.643Z,1516680704.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:11:44.644Z,1516680704.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:45.046Z,1516680705.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:11:45.047Z,1516680705.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:45.449Z,1516680705.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:11:45.450Z,1516680705.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:45.849Z,1516680705.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:11:45.850Z,1516680705.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:46.255Z,1516680706.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:11:46.256Z,1516680706.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:46.650Z,1516680706.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:11:46.651Z,1516680706.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:47.044Z,1516680707.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:11:47.045Z,1516680707.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:47.438Z,1516680707.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:11:47.439Z,1516680707.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:47.839Z,1516680707.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:11:47.840Z,1516680707.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:48.244Z,1516680708.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:11:48.245Z,1516680708.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:48.640Z,1516680708.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:11:48.641Z,1516680708.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:49.042Z,1516680709.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:11:49.043Z,1516680709.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:49.434Z,1516680709.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:11:49.435Z,1516680709.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:49.835Z,1516680709.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:11:49.836Z,1516680709.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:50.235Z,1516680710.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:11:50.236Z,1516680710.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:50.637Z,1516680710.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:11:50.637Z,1516680710.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:51.035Z,1516680711.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:11:51.036Z,1516680711.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:51.456Z,1516680711.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:11:51.457Z,1516680711.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:51.856Z,1516680711.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:11:51.857Z,1516680711.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:52.246Z,1516680712.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:11:52.247Z,1516680712.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:52.643Z,1516680712.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:53.043Z,1516680713.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:53.448Z,1516680713.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:53.841Z,1516680713.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:54.246Z,1516680714.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:54.650Z,1516680714.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:55.046Z,1516680715.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:55.442Z,1516680715.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:55.846Z,1516680715.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:56.241Z,1516680716.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:56.637Z,1516680716.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:57.038Z,1516680717.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:57.446Z,1516680717.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:57.849Z,1516680717.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:58.250Z,1516680718.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:58.645Z,1516680718.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:59.045Z,1516680719.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:59.440Z,1516680719.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:11:59.841Z,1516680719.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:00.246Z,1516680720.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:00.653Z,1516680720.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:01.049Z,1516680721.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:01.449Z,1516680721.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:01.839Z,1516680721.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:02.244Z,1516680722.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:02.644Z,1516680722.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:03.042Z,1516680723.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:03.454Z,1516680723.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:03.850Z,1516680723.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:04.250Z,1516680724.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:04.656Z,1516680724.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:05.041Z,1516680725.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:05.449Z,1516680725.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:05.847Z,1516680725.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:06.249Z,1516680726.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:06.652Z,1516680726.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:07.049Z,1516680727.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:07.445Z,1516680727.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:07.851Z,1516680727.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:08.233Z,1516680728.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:08.647Z,1516680728.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:09.046Z,1516680729.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:09.456Z,1516680729.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:09.851Z,1516680729.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:10.249Z,1516680730.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:10.625Z,1516680730.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:11.049Z,1516680731.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:11.432Z,1516680731.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:11.853Z,1516680731.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:12.256Z,1516680732.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:12.657Z,1516680732.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:13.061Z,1516680733.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:13.441Z,1516680733.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:13.832Z,1516680733.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:14.233Z,1516680734.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:14.644Z,1516680734.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:15.039Z,1516680735.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:15.445Z,1516680735.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:15.842Z,1516680735.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:16.241Z,1516680736.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:16.635Z,1516680736.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:17.036Z,1516680737.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:17.445Z,1516680737.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:17.835Z,1516680737.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:18.247Z,1516680738.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:18.645Z,1516680738.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:19.046Z,1516680739.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:19.436Z,1516680739.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:19.835Z,1516680739.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:20.234Z,1516680740.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:20.645Z,1516680740.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:21.046Z,1516680741.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:21.445Z,1516680741.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:21.857Z,1516680741.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:22.246Z,1516680742.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:22.637Z,1516680742.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:23.045Z,1516680743.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:23.447Z,1516680743.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:23.841Z,1516680743.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:24.246Z,1516680744.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:24.650Z,1516680744.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:25.047Z,1516680745.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:25.443Z,1516680745.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:25.838Z,1516680745.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:26.245Z,1516680746.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:26.643Z,1516680746.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:27.046Z,1516680747.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:27.447Z,1516680747.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:27.849Z,1516680747.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:28.246Z,1516680748.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:28.657Z,1516680748.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:29.045Z,1516680749.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:29.444Z,1516680749.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:29.841Z,1516680749.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:30.246Z,1516680750.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:30.658Z,1516680750.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:31.053Z,1516680751.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:31.445Z,1516680751.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:31.838Z,1516680751.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:32.241Z,1516680752.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:32.644Z,1516680752.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:33.046Z,1516680753.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:33.447Z,1516680753.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:33.849Z,1516680753.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:34.245Z,1516680754.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:34.657Z,1516680754.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:35.045Z,1516680755.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:35.438Z,1516680755.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:35.845Z,1516680755.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:36.246Z,1516680756.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:36.656Z,1516680756.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:37.047Z,1516680757.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:37.443Z,1516680757.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:37.847Z,1516680757.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:40.939Z,1516680760.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:41.061Z,1516680761.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:41.418Z,1516680761.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:41.812Z,1516680761.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:42.209Z,1516680762.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:42.608Z,1516680762.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:43.005Z,1516680763.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:43.410Z,1516680763.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:43.804Z,1516680763.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:44.215Z,1516680764.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:44.618Z,1516680764.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:45.025Z,1516680765.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:45.405Z,1516680765.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:45.806Z,1516680765.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:46.206Z,1516680766.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:46.605Z,1516680766.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:47.006Z,1516680767.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:47.419Z,1516680767.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:47.821Z,1516680767.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:48.215Z,1516680768.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:48.611Z,1516680768.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:49.014Z,1516680769.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:49.411Z,1516680769.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:49.816Z,1516680769.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:50.225Z,1516680770.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:50.614Z,1516680770.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:51.025Z,1516680771.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:51.411Z,1516680771.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:51.810Z,1516680771.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:52.220Z,1516680772.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:52.627Z,1516680772.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:53.016Z,1516680773.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:53.412Z,1516680773.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:53.817Z,1516680773.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:54.218Z,1516680774.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:54.630Z,1516680774.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:55.025Z,1516680775.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:55.411Z,1516680775.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:55.813Z,1516680775.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:56.221Z,1516680776.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:56.625Z,1516680776.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:57.018Z,1516680777.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:57.417Z,1516680777.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:57.815Z,1516680777.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:58.224Z,1516680778.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:58.619Z,1516680778.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:59.025Z,1516680779.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:59.415Z,1516680779.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:12:59.817Z,1516680779.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:00.224Z,1516680780.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:00.622Z,1516680780.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:01.025Z,1516680781.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:01.419Z,1516680781.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:01.807Z,1516680781.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:02.221Z,1516680782.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:02.617Z,1516680782.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:03.017Z,1516680783.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:03.424Z,1516680783.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:03.819Z,1516680783.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:04.220Z,1516680784.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:04.628Z,1516680784.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:05.020Z,1516680785.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:05.396Z,1516680785.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:05.800Z,1516680785.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:06.206Z,1516680786.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:06.628Z,1516680786.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:07.033Z,1516680787.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:07.404Z,1516680787.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:07.808Z,1516680787.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:08.235Z,1516680788.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:08.606Z,1516680788.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:09.010Z,1516680789.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:09.405Z,1516680789.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:09.812Z,1516680789.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:10.217Z,1516680790.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:10.612Z,1516680790.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:11.013Z,1516680791.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:11.411Z,1516680791.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:11.804Z,1516680791.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:12.218Z,1516680792.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:12.621Z,1516680792.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:13.018Z,1516680793.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:13.406Z,1516680793.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:13.806Z,1516680793.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:14.214Z,1516680794.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:14.617Z,1516680794.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:15.013Z,1516680795.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:15.405Z,1516680795.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:15.812Z,1516680795.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:16.221Z,1516680796.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:16.624Z,1516680796.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:17.019Z,1516680797.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:17.412Z,1516680797.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:17.808Z,1516680797.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:18.216Z,1516680798.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:18.619Z,1516680798.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:19.015Z,1516680799.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:19.417Z,1516680799.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:19.820Z,1516680799.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:20.215Z,1516680800.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:20.620Z,1516680800.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:21.029Z,1516680801.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:21.412Z,1516680801.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:21.809Z,1516680801.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:22.214Z,1516680802.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:22.619Z,1516680802.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:23.018Z,1516680803.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:23.408Z,1516680803.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:23.818Z,1516680803.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:24.224Z,1516680804.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:24.619Z,1516680804.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:25.024Z,1516680805.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:25.393Z,1516680805.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:25.820Z,1516680805.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:26.218Z,1516680806.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:26.624Z,1516680806.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:27.030Z,1516680807.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:27.396Z,1516680807.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:27.801Z,1516680807.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:28.225Z,1516680808.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:28.628Z,1516680808.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:29.021Z,1516680809.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:29.424Z,1516680809.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:29.803Z,1516680809.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:30.206Z,1516680810.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:30.629Z,1516680810.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:31.026Z,1516680811.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:31.402Z,1516680811.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:31.810Z,1516680811.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:32.204Z,1516680812.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:32.613Z,1516680812.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:33.036Z,1516680813.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:33.412Z,1516680813.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:33.805Z,1516680813.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:34.204Z,1516680814.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:34.604Z,1516680814.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:35.012Z,1516680815.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:35.440Z,1516680815.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:35.809Z,1516680815.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:36.217Z,1516680816.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:36.603Z,1516680816.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:37.008Z,1516680817.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:37.401Z,1516680817.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:37.804Z,1516680817.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:38.216Z,1516680818.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:41.330Z,1516680821.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:41.447Z,1516680821.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:41.806Z,1516680821.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:42.207Z,1516680822.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:42.601Z,1516680822.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:43.001Z,1516680823.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:43.427Z,1516680823.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:43.825Z,1516680823.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:44.227Z,1516680824.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:44.604Z,1516680824.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:45.009Z,1516680825.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:45.401Z,1516680825.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:45.806Z,1516680825.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:46.197Z,1516680826.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:46.605Z,1516680826.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:47.006Z,1516680827.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:47.406Z,1516680827.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:47.805Z,1516680827.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:48.213Z,1516680828.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:48.605Z,1516680828.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:49.017Z,1516680829.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:49.416Z,1516680829.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:49.821Z,1516680829.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:50.217Z,1516680830.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:50.612Z,1516680830.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:51.013Z,1516680831.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:51.405Z,1516680831.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:51.803Z,1516680831.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:52.206Z,1516680832.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:52.614Z,1516680832.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:53.017Z,1516680833.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:53.422Z,1516680833.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:53.809Z,1516680833.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:54.205Z,1516680834.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:54.609Z,1516680834.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:55.005Z,1516680835.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:55.420Z,1516680835.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:55.815Z,1516680835.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:56.220Z,1516680836.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:56.606Z,1516680836.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:57.015Z,1516680837.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:57.417Z,1516680837.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:57.807Z,1516680837.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:58.205Z,1516680838.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:58.613Z,1516680838.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:59.017Z,1516680839.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:59.416Z,1516680839.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:13:59.804Z,1516680839.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:00.213Z,1516680840.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:00.604Z,1516680840.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:01.010Z,1516680841.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:01.422Z,1516680841.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:01.816Z,1516680841.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:02.217Z,1516680842.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:02.612Z,1516680842.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:03.010Z,1516680843.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:03.410Z,1516680843.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:03.814Z,1516680843.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:04.217Z,1516680844.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:04.624Z,1516680844.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:05.018Z,1516680845.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:05.420Z,1516680845.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:05.817Z,1516680845.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:06.209Z,1516680846.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:06.619Z,1516680846.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:07.020Z,1516680847.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:07.425Z,1516680847.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:07.833Z,1516680847.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:08.225Z,1516680848.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:08.610Z,1516680848.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:09.021Z,1516680849.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:09.406Z,1516680849.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:09.805Z,1516680849.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:10.204Z,1516680850.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:10.632Z,1516680850.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:11.006Z,1516680851.006 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T04:14:11.042Z,1516680851.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:11.415Z,1516680851.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:11.806Z,1516680851.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:11.819Z,1516680851.819 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:14:12.212Z,1516680852.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:12.610Z,1516680852.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:13.009Z,1516680853.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:13.417Z,1516680853.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:13.833Z,1516680853.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:14.221Z,1516680854.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:14.621Z,1516680854.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:15.001Z,1516680855.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x24215 got:0x44976 2018-01-23T04:14:15.029Z,1516680855.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:15.425Z,1516680855.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:15.818Z,1516680855.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:16.204Z,1516680856.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:16.615Z,1516680856.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:17.026Z,1516680857.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:17.416Z,1516680857.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:17.810Z,1516680857.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:18.213Z,1516680858.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:18.612Z,1516680858.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:19.014Z,1516680859.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:19.419Z,1516680859.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:19.825Z,1516680859.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:20.241Z,1516680860.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:20.621Z,1516680860.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:20.996Z,1516680860.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:21.401Z,1516680861.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:21.800Z,1516680861.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:22.201Z,1516680862.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:22.610Z,1516680862.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:23.013Z,1516680863.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:23.435Z,1516680863.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:23.808Z,1516680863.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:24.201Z,1516680864.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:24.606Z,1516680864.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:25.004Z,1516680865.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:25.410Z,1516680865.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:25.837Z,1516680865.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:26.213Z,1516680866.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:26.601Z,1516680866.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:26.999Z,1516680866.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:27.410Z,1516680867.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:27.804Z,1516680867.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:28.201Z,1516680868.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:28.609Z,1516680868.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:29.010Z,1516680869.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:29.413Z,1516680869.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:29.805Z,1516680869.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:30.203Z,1516680870.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:30.602Z,1516680870.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:31.005Z,1516680871.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:31.411Z,1516680871.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:31.809Z,1516680871.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:32.210Z,1516680872.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:32.604Z,1516680872.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:33.002Z,1516680873.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:33.412Z,1516680873.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:33.412Z,1516680873.412 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-01-23T04:14:33.412Z,1516680873.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:14:33.414Z,1516680873.414 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:33.414Z,1516680873.414 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-01-23T04:14:33.414Z,1516680873.414 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:14:33.416Z,1516680873.416 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:33.416Z,1516680873.416 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20 2018-01-23T04:14:33.416Z,1516680873.416 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:14:33.437Z,1516680873.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:14:33.437Z,1516680873.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:14:33.437Z,1516680873.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:14:33.829Z,1516680873.829 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:14:33.829Z,1516680873.829 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-01-23T04:14:33.830Z,1516680873.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:14:33.830Z,1516680873.830 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-01-23T04:14:33.830Z,1516680873.830 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:14:33.830Z,1516680873.830 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20 2018-01-23T04:14:34.201Z,1516680874.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:14:34.202Z,1516680874.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:14:34.202Z,1516680874.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:14:34.202Z,1516680874.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:14:34.203Z,1516680874.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:14:34.203Z,1516680874.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:14:34.204Z,1516680874.204 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:14:34.204Z,1516680874.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:14:34.204Z,1516680874.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:14:34.618Z,1516680874.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:14:34.623Z,1516680874.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:35.022Z,1516680875.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:14:35.027Z,1516680875.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:35.417Z,1516680875.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:14:35.418Z,1516680875.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:35.793Z,1516680875.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:14:35.794Z,1516680875.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:36.190Z,1516680876.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:14:36.191Z,1516680876.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:36.195Z,1516680876.195 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T04:09:35.9Z 2018-01-23T04:14:36.196Z,1516680876.196 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:14:36.196Z,1516680876.196 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:14:36.624Z,1516680876.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:14:36.625Z,1516680876.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:37.127Z,1516680877.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T04:14:37.128Z,1516680877.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:37.420Z,1516680877.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:14:37.422Z,1516680877.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:40.522Z,1516680880.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T04:14:40.523Z,1516680880.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:40.612Z,1516680880.612 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0024.lzma 2018-01-23T04:14:40.675Z,1516680880.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T04:14:40.676Z,1516680880.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:41.024Z,1516680881.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:14:41.025Z,1516680881.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:41.574Z,1516680881.574 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0024.lzma.bak 2018-01-23T04:14:41.574Z,1516680881.574 [DataOverHttps](INFO): SBD MOMSN=7754976 2018-01-23T04:14:41.630Z,1516680881.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s. 2018-01-23T04:14:41.631Z,1516680881.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:42.023Z,1516680882.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s. 2018-01-23T04:14:42.024Z,1516680882.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:42.226Z,1516680882.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:14:42.228Z,1516680882.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:45.293Z,1516680885.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T04:14:45.294Z,1516680885.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:45.444Z,1516680885.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:14:45.445Z,1516680885.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:45.790Z,1516680885.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:14:45.792Z,1516680885.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:46.192Z,1516680886.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:14:46.193Z,1516680886.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:46.590Z,1516680886.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:14:46.591Z,1516680886.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:46.998Z,1516680886.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:14:46.999Z,1516680886.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:50.094Z,1516680890.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T04:14:50.095Z,1516680890.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:50.175Z,1516680890.175 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0025.lzma 2018-01-23T04:14:50.252Z,1516680890.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:14:50.253Z,1516680890.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:50.585Z,1516680890.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:14:50.586Z,1516680890.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:50.924Z,1516680890.924 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0025.lzma.bak 2018-01-23T04:14:50.924Z,1516680890.924 [DataOverHttps](INFO): SBD MOMSN=7754979 2018-01-23T04:14:50.986Z,1516680890.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:14:50.988Z,1516680890.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:51.592Z,1516680891.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s. 2018-01-23T04:14:51.593Z,1516680891.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:51.596Z,1516680891.596 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:14:51.596Z,1516680891.596 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:14:51.596Z,1516680891.596 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:14:51.784Z,1516680891.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:14:51.785Z,1516680891.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:54.880Z,1516680894.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:55.029Z,1516680895.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:55.350Z,1516680895.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:55.779Z,1516680895.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:56.146Z,1516680896.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:56.576Z,1516680896.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:56.952Z,1516680896.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:57.355Z,1516680897.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:57.754Z,1516680897.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:58.154Z,1516680898.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:58.549Z,1516680898.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:58.947Z,1516680898.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:59.354Z,1516680899.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:14:59.766Z,1516680899.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:00.165Z,1516680900.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:00.557Z,1516680900.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:00.953Z,1516680900.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:01.358Z,1516680901.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:01.777Z,1516680901.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:02.162Z,1516680902.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:02.554Z,1516680902.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:02.951Z,1516680902.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:03.365Z,1516680903.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:03.762Z,1516680903.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:04.161Z,1516680904.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:04.553Z,1516680904.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:04.956Z,1516680904.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:05.361Z,1516680905.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:05.763Z,1516680905.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:06.167Z,1516680906.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:06.572Z,1516680906.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:06.967Z,1516680906.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:07.365Z,1516680907.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:07.760Z,1516680907.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:08.160Z,1516680908.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:08.573Z,1516680908.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:08.967Z,1516680908.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:09.362Z,1516680909.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:09.765Z,1516680909.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:10.144Z,1516680910.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:10.575Z,1516680910.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:10.946Z,1516680910.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:11.344Z,1516680911.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:11.771Z,1516680911.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:12.177Z,1516680912.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:12.577Z,1516680912.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:12.948Z,1516680912.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:13.346Z,1516680913.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:13.763Z,1516680913.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:14.149Z,1516680914.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:14.558Z,1516680914.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:14.968Z,1516680914.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:15.365Z,1516680915.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:15.753Z,1516680915.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:16.153Z,1516680916.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:16.553Z,1516680916.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:16.995Z,1516680916.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:17.354Z,1516680917.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:17.764Z,1516680917.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:18.173Z,1516680918.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:18.582Z,1516680918.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:18.978Z,1516680918.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:19.381Z,1516680919.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:19.822Z,1516680919.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:20.182Z,1516680920.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:20.580Z,1516680920.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:20.991Z,1516680920.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:21.361Z,1516680921.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:21.791Z,1516680921.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:22.153Z,1516680922.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:22.567Z,1516680922.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:22.976Z,1516680922.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:23.366Z,1516680923.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:23.789Z,1516680923.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:24.205Z,1516680924.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:24.616Z,1516680924.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:24.960Z,1516680924.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:25.380Z,1516680925.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:25.783Z,1516680925.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:26.195Z,1516680926.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:26.604Z,1516680926.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:26.983Z,1516680926.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:27.385Z,1516680927.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:27.779Z,1516680927.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:28.150Z,1516680928.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:28.597Z,1516680928.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:28.974Z,1516680928.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:29.353Z,1516680929.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:29.767Z,1516680929.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:30.162Z,1516680930.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:30.569Z,1516680930.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:30.956Z,1516680930.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:31.353Z,1516680931.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:31.761Z,1516680931.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:32.153Z,1516680932.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:32.568Z,1516680932.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:32.966Z,1516680932.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:33.361Z,1516680933.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:33.739Z,1516680933.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:34.139Z,1516680934.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:34.568Z,1516680934.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:34.964Z,1516680934.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:35.347Z,1516680935.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:35.777Z,1516680935.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:36.177Z,1516680936.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:36.574Z,1516680936.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:36.969Z,1516680936.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:37.345Z,1516680937.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:37.744Z,1516680937.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:38.144Z,1516680938.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:38.574Z,1516680938.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:38.976Z,1516680938.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:39.373Z,1516680939.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:39.753Z,1516680939.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:40.151Z,1516680940.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:40.556Z,1516680940.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:40.949Z,1516680940.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:41.348Z,1516680941.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:41.753Z,1516680941.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:42.154Z,1516680942.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:42.560Z,1516680942.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:42.941Z,1516680942.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:43.345Z,1516680943.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:43.741Z,1516680943.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:44.143Z,1516680944.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:44.554Z,1516680944.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:44.954Z,1516680944.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:45.350Z,1516680945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:45.745Z,1516680945.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:46.147Z,1516680946.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:46.538Z,1516680946.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:46.942Z,1516680946.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:47.345Z,1516680947.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:47.811Z,1516680947.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:48.165Z,1516680948.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:48.565Z,1516680948.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:48.945Z,1516680948.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:49.349Z,1516680949.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:49.749Z,1516680949.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:50.154Z,1516680950.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:50.554Z,1516680950.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:50.955Z,1516680950.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:51.353Z,1516680951.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:51.748Z,1516680951.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:52.149Z,1516680952.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:55.331Z,1516680955.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:55.481Z,1516680955.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:55.807Z,1516680955.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:56.210Z,1516680956.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:56.609Z,1516680956.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:56.999Z,1516680956.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:57.397Z,1516680957.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:57.796Z,1516680957.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:58.209Z,1516680958.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:58.606Z,1516680958.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:59.010Z,1516680959.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:59.406Z,1516680959.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:15:59.797Z,1516680959.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:00.200Z,1516680960.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:00.609Z,1516680960.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:01.002Z,1516680961.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:01.435Z,1516680961.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:01.807Z,1516680961.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:02.206Z,1516680962.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:02.605Z,1516680962.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:03.004Z,1516680963.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:03.397Z,1516680963.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:03.798Z,1516680963.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:04.204Z,1516680964.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:04.606Z,1516680964.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:05.013Z,1516680965.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:05.405Z,1516680965.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:05.804Z,1516680965.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:06.205Z,1516680966.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:06.600Z,1516680966.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:06.998Z,1516680966.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:07.398Z,1516680967.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:07.810Z,1516680967.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:08.206Z,1516680968.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:08.607Z,1516680968.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:09.004Z,1516680969.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:09.405Z,1516680969.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:09.799Z,1516680969.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:10.204Z,1516680970.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:10.610Z,1516680970.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:11.010Z,1516680971.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:11.410Z,1516680971.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:11.800Z,1516680971.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:12.205Z,1516680972.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:12.609Z,1516680972.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:12.997Z,1516680972.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:13.403Z,1516680973.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:13.813Z,1516680973.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:14.212Z,1516680974.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:14.609Z,1516680974.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:15.009Z,1516680975.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:15.396Z,1516680975.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:15.801Z,1516680975.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:16.209Z,1516680976.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:16.616Z,1516680976.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:17.013Z,1516680977.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:17.409Z,1516680977.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:17.796Z,1516680977.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:18.205Z,1516680978.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:18.605Z,1516680978.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:19.004Z,1516680979.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:19.409Z,1516680979.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:19.813Z,1516680979.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:20.209Z,1516680980.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:20.609Z,1516680980.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:21.003Z,1516680981.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:21.409Z,1516680981.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:21.800Z,1516680981.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:22.203Z,1516680982.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:22.616Z,1516680982.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:23.013Z,1516680983.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:23.413Z,1516680983.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:23.796Z,1516680983.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:24.209Z,1516680984.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:24.609Z,1516680984.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:24.997Z,1516680984.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:25.403Z,1516680985.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:25.813Z,1516680985.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:26.209Z,1516680986.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:26.613Z,1516680986.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:27.009Z,1516680987.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:27.401Z,1516680987.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:27.805Z,1516680987.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:28.204Z,1516680988.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:28.611Z,1516680988.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:29.002Z,1516680989.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:29.426Z,1516680989.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:29.798Z,1516680989.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:30.195Z,1516680990.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:30.597Z,1516680990.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:31.004Z,1516680991.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:31.397Z,1516680991.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:31.828Z,1516680991.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:32.202Z,1516680992.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:32.609Z,1516680992.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:33.000Z,1516680993.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:33.396Z,1516680993.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:33.797Z,1516680993.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:34.205Z,1516680994.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:34.602Z,1516680994.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:35.006Z,1516680995.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:35.406Z,1516680995.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:35.799Z,1516680995.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:36.208Z,1516680996.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:36.600Z,1516680996.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:36.997Z,1516680996.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:37.396Z,1516680997.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:37.806Z,1516680997.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:38.205Z,1516680998.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:38.610Z,1516680998.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:39.004Z,1516680999.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:39.397Z,1516680999.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:39.809Z,1516680999.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:40.209Z,1516681000.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:40.616Z,1516681000.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:41.006Z,1516681001.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:41.410Z,1516681001.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:41.804Z,1516681001.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:42.205Z,1516681002.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:42.603Z,1516681002.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:43.006Z,1516681003.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:43.406Z,1516681003.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:43.814Z,1516681003.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:44.210Z,1516681004.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:44.608Z,1516681004.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:45.005Z,1516681005.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:45.412Z,1516681005.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:45.803Z,1516681005.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:46.207Z,1516681006.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:46.612Z,1516681006.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:47.017Z,1516681007.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:47.411Z,1516681007.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:47.817Z,1516681007.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:48.209Z,1516681008.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:48.606Z,1516681008.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:48.999Z,1516681008.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:49.407Z,1516681009.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:49.813Z,1516681009.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:50.217Z,1516681010.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:50.606Z,1516681010.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:51.006Z,1516681011.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:51.400Z,1516681011.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:51.802Z,1516681011.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:52.205Z,1516681012.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:55.308Z,1516681015.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:55.441Z,1516681015.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:55.793Z,1516681015.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:56.175Z,1516681016.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:56.569Z,1516681016.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:56.981Z,1516681016.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:57.372Z,1516681017.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:57.806Z,1516681017.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:58.186Z,1516681018.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:58.589Z,1516681018.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:59.011Z,1516681019.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:59.381Z,1516681019.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:16:59.781Z,1516681019.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:00.173Z,1516681020.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:00.587Z,1516681020.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:00.986Z,1516681020.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:01.385Z,1516681021.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:01.777Z,1516681021.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:02.172Z,1516681022.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:02.586Z,1516681022.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:02.986Z,1516681022.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:03.386Z,1516681023.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:03.782Z,1516681023.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:04.181Z,1516681024.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:04.586Z,1516681024.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:04.993Z,1516681024.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:05.389Z,1516681025.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:05.782Z,1516681025.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:06.185Z,1516681026.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:06.586Z,1516681026.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:06.986Z,1516681026.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:07.386Z,1516681027.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:07.781Z,1516681027.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:08.182Z,1516681028.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:08.591Z,1516681028.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:08.988Z,1516681028.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:09.393Z,1516681029.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:09.780Z,1516681029.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:10.174Z,1516681030.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:10.597Z,1516681030.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:10.999Z,1516681030.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:11.385Z,1516681031.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:11.792Z,1516681031.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:12.162Z,1516681032.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:12.597Z,1516681032.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:12.990Z,1516681032.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:13.391Z,1516681033.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:13.773Z,1516681033.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:14.172Z,1516681034.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:14.596Z,1516681034.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:14.997Z,1516681034.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:15.397Z,1516681035.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:15.770Z,1516681035.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:16.173Z,1516681036.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:16.578Z,1516681036.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:16.981Z,1516681036.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:17.384Z,1516681037.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:17.784Z,1516681037.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:18.179Z,1516681038.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:18.586Z,1516681038.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:18.988Z,1516681038.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:19.385Z,1516681039.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:19.778Z,1516681039.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:20.184Z,1516681040.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:20.594Z,1516681040.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:20.993Z,1516681040.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:21.393Z,1516681041.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:21.778Z,1516681041.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:22.181Z,1516681042.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:22.592Z,1516681042.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:22.990Z,1516681042.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:23.384Z,1516681043.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:23.788Z,1516681043.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:24.176Z,1516681044.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:24.585Z,1516681044.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:24.988Z,1516681044.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:25.385Z,1516681045.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:25.780Z,1516681045.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:26.185Z,1516681046.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:26.585Z,1516681046.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:26.997Z,1516681046.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:27.392Z,1516681047.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:27.779Z,1516681047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:28.183Z,1516681048.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:28.589Z,1516681048.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:28.986Z,1516681048.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:29.385Z,1516681049.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:29.781Z,1516681049.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:30.169Z,1516681050.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:30.583Z,1516681050.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:30.993Z,1516681050.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:31.394Z,1516681051.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:31.797Z,1516681051.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:32.191Z,1516681052.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:32.569Z,1516681052.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:32.986Z,1516681052.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:33.377Z,1516681053.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:33.801Z,1516681053.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:34.202Z,1516681054.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:34.202Z,1516681054.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-01-23T04:17:34.202Z,1516681054.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:17:34.208Z,1516681054.208 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:34.208Z,1516681054.208 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-01-23T04:17:34.208Z,1516681054.208 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:17:34.210Z,1516681054.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:34.210Z,1516681054.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21 2018-01-23T04:17:34.210Z,1516681054.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:17:34.230Z,1516681054.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:17:34.239Z,1516681054.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:17:34.239Z,1516681054.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:17:34.611Z,1516681054.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:17:34.611Z,1516681054.611 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-01-23T04:17:34.612Z,1516681054.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:17:34.612Z,1516681054.612 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-01-23T04:17:34.612Z,1516681054.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:17:34.612Z,1516681054.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21 2018-01-23T04:17:34.973Z,1516681054.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:17:34.973Z,1516681054.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:17:34.974Z,1516681054.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:17:34.974Z,1516681054.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:17:34.974Z,1516681054.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:17:34.975Z,1516681054.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:17:34.975Z,1516681054.975 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:17:34.976Z,1516681054.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:17:34.976Z,1516681054.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:17:35.377Z,1516681055.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:17:35.378Z,1516681055.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:35.786Z,1516681055.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:17:35.787Z,1516681055.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:36.172Z,1516681056.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:17:36.173Z,1516681056.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:36.579Z,1516681056.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:17:36.580Z,1516681056.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:36.998Z,1516681056.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:17:36.999Z,1516681056.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:37.390Z,1516681057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:17:37.391Z,1516681057.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:37.786Z,1516681057.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:17:37.787Z,1516681057.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:38.184Z,1516681058.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:17:38.185Z,1516681058.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:38.583Z,1516681058.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:17:38.584Z,1516681058.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:38.982Z,1516681058.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:17:38.983Z,1516681058.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:39.387Z,1516681059.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:17:39.388Z,1516681059.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:39.791Z,1516681059.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:17:39.792Z,1516681059.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:40.188Z,1516681060.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:17:40.189Z,1516681060.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:40.589Z,1516681060.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:17:40.590Z,1516681060.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:40.984Z,1516681060.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:17:40.984Z,1516681060.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:41.380Z,1516681061.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:17:41.381Z,1516681061.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:41.784Z,1516681061.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:17:41.785Z,1516681061.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:42.188Z,1516681062.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:17:42.189Z,1516681062.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:42.571Z,1516681062.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:17:42.572Z,1516681062.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:42.995Z,1516681062.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:17:42.996Z,1516681062.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:43.396Z,1516681063.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:17:43.396Z,1516681063.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:43.804Z,1516681063.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:17:43.805Z,1516681063.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:44.173Z,1516681064.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:17:44.174Z,1516681064.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:44.575Z,1516681064.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:17:44.576Z,1516681064.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:44.971Z,1516681064.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:17:44.972Z,1516681064.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:45.377Z,1516681065.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:17:45.378Z,1516681065.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:45.805Z,1516681065.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:17:45.806Z,1516681065.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:46.206Z,1516681066.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:17:46.207Z,1516681066.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:46.584Z,1516681066.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:17:46.585Z,1516681066.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:46.977Z,1516681066.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:17:46.978Z,1516681066.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:47.382Z,1516681067.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:17:47.387Z,1516681067.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:47.779Z,1516681067.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:17:47.780Z,1516681067.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:48.174Z,1516681068.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:17:48.175Z,1516681068.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:48.579Z,1516681068.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:17:48.580Z,1516681068.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:48.986Z,1516681068.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:17:48.987Z,1516681068.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:49.392Z,1516681069.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:17:49.393Z,1516681069.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:49.789Z,1516681069.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:17:49.790Z,1516681069.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:50.179Z,1516681070.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:17:50.180Z,1516681070.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:50.574Z,1516681070.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:17:50.575Z,1516681070.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:50.985Z,1516681070.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:17:50.986Z,1516681070.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:51.379Z,1516681071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:17:51.380Z,1516681071.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:51.786Z,1516681071.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:17:51.787Z,1516681071.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:52.190Z,1516681072.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:17:52.195Z,1516681072.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:52.590Z,1516681072.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:17:52.591Z,1516681072.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:55.743Z,1516681075.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:55.881Z,1516681075.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:56.245Z,1516681076.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:56.653Z,1516681076.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:57.042Z,1516681077.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:57.440Z,1516681077.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:57.841Z,1516681077.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:58.240Z,1516681078.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:58.642Z,1516681078.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:59.047Z,1516681079.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:59.449Z,1516681079.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:17:59.834Z,1516681079.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:00.245Z,1516681080.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:00.646Z,1516681080.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:01.053Z,1516681081.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:01.448Z,1516681081.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:01.840Z,1516681081.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:02.236Z,1516681082.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:02.643Z,1516681082.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:03.045Z,1516681083.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:03.451Z,1516681083.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:03.837Z,1516681083.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:04.240Z,1516681084.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:04.642Z,1516681084.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:05.050Z,1516681085.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:05.449Z,1516681085.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:05.841Z,1516681085.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:06.236Z,1516681086.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:06.644Z,1516681086.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:07.043Z,1516681087.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:07.450Z,1516681087.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:07.849Z,1516681087.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:08.236Z,1516681088.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:08.637Z,1516681088.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:09.040Z,1516681089.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:09.441Z,1516681089.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:09.853Z,1516681089.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:10.248Z,1516681090.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:10.649Z,1516681090.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:11.042Z,1516681091.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:11.441Z,1516681091.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:11.844Z,1516681091.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:12.244Z,1516681092.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:12.650Z,1516681092.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:13.052Z,1516681093.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:13.447Z,1516681093.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:13.851Z,1516681093.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:14.244Z,1516681094.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:14.642Z,1516681094.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:15.043Z,1516681095.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:15.446Z,1516681095.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:15.851Z,1516681095.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:16.265Z,1516681096.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:16.643Z,1516681096.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:17.044Z,1516681097.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:17.449Z,1516681097.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:17.843Z,1516681097.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:18.244Z,1516681098.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:18.695Z,1516681098.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:19.050Z,1516681099.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:19.455Z,1516681099.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:19.851Z,1516681099.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:20.243Z,1516681100.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:20.644Z,1516681100.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:21.045Z,1516681101.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:21.443Z,1516681101.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:21.847Z,1516681101.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:22.245Z,1516681102.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:22.646Z,1516681102.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:23.041Z,1516681103.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:23.443Z,1516681103.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:23.846Z,1516681103.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:24.242Z,1516681104.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:24.649Z,1516681104.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:25.052Z,1516681105.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:25.451Z,1516681105.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:25.846Z,1516681105.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:26.246Z,1516681106.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:26.642Z,1516681106.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:27.038Z,1516681107.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:27.426Z,1516681107.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:27.861Z,1516681107.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:28.249Z,1516681108.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:28.657Z,1516681108.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:29.026Z,1516681109.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:29.457Z,1516681109.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:29.836Z,1516681109.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:30.228Z,1516681110.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:30.637Z,1516681110.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:31.062Z,1516681111.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:31.442Z,1516681111.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:31.864Z,1516681111.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:32.242Z,1516681112.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:32.632Z,1516681112.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:33.040Z,1516681113.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:33.437Z,1516681113.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:33.842Z,1516681113.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:34.238Z,1516681114.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:34.667Z,1516681114.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:35.038Z,1516681115.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:35.435Z,1516681115.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:35.844Z,1516681115.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:36.237Z,1516681116.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:36.635Z,1516681116.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:37.044Z,1516681117.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:37.441Z,1516681117.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:37.842Z,1516681117.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:38.245Z,1516681118.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:38.625Z,1516681118.625 [PNI_TCM](ERROR): CRC does not match. Expected:0x53298 got:0x23047 2018-01-23T04:18:38.668Z,1516681118.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:39.036Z,1516681119.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:39.433Z,1516681119.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:39.842Z,1516681119.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:40.240Z,1516681120.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:40.645Z,1516681120.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:41.038Z,1516681121.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:41.449Z,1516681121.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:41.845Z,1516681121.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:42.233Z,1516681122.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:42.635Z,1516681122.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:43.062Z,1516681123.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:43.432Z,1516681123.432 [PNI_TCM](ERROR): CRC does not match. Expected:0x50165 got:0x49796 2018-01-23T04:18:43.473Z,1516681123.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:43.850Z,1516681123.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:44.235Z,1516681124.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:44.649Z,1516681124.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:45.044Z,1516681125.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:45.439Z,1516681125.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:45.845Z,1516681125.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:46.266Z,1516681126.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:46.636Z,1516681126.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x57001 got:0x16910 2018-01-23T04:18:46.673Z,1516681126.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:47.038Z,1516681127.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:47.436Z,1516681127.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:47.845Z,1516681127.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:48.237Z,1516681128.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:48.636Z,1516681128.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:49.044Z,1516681129.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:49.466Z,1516681129.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:49.844Z,1516681129.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:50.241Z,1516681130.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:50.634Z,1516681130.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:51.051Z,1516681131.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:51.438Z,1516681131.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:51.844Z,1516681131.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:52.249Z,1516681132.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:52.654Z,1516681132.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:55.775Z,1516681135.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:55.920Z,1516681135.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:56.269Z,1516681136.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:56.650Z,1516681136.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x8828 got:0x6466 2018-01-23T04:18:56.669Z,1516681136.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:57.069Z,1516681137.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:57.462Z,1516681137.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:57.839Z,1516681137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:58.244Z,1516681138.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:58.641Z,1516681138.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:59.072Z,1516681139.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:59.467Z,1516681139.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:18:59.850Z,1516681139.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:00.243Z,1516681140.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:00.669Z,1516681140.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:01.038Z,1516681141.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:01.439Z,1516681141.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:01.853Z,1516681141.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:02.276Z,1516681142.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:02.684Z,1516681142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:03.050Z,1516681143.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:03.451Z,1516681143.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:03.842Z,1516681143.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:04.244Z,1516681144.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:04.651Z,1516681144.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:05.058Z,1516681145.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:05.484Z,1516681145.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:05.850Z,1516681145.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:06.245Z,1516681146.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:06.653Z,1516681146.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:07.046Z,1516681147.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:07.453Z,1516681147.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:07.861Z,1516681147.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:08.257Z,1516681148.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:08.657Z,1516681148.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:09.042Z,1516681149.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:09.459Z,1516681149.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:09.853Z,1516681149.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:10.230Z,1516681150.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:10.660Z,1516681150.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:11.062Z,1516681151.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:11.464Z,1516681151.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:11.871Z,1516681151.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:12.240Z,1516681152.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:12.638Z,1516681152.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:13.040Z,1516681153.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:13.440Z,1516681153.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:13.849Z,1516681153.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:14.246Z,1516681154.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:14.719Z,1516681154.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:15.043Z,1516681155.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:15.445Z,1516681155.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:15.840Z,1516681155.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:16.240Z,1516681156.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:16.640Z,1516681156.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:17.046Z,1516681157.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:17.453Z,1516681157.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:17.851Z,1516681157.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:18.240Z,1516681158.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:18.639Z,1516681158.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:19.043Z,1516681159.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:19.443Z,1516681159.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:19.853Z,1516681159.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:20.257Z,1516681160.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:20.661Z,1516681160.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:21.049Z,1516681161.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:21.443Z,1516681161.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:21.844Z,1516681161.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:22.244Z,1516681162.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:22.641Z,1516681162.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:23.050Z,1516681163.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:23.449Z,1516681163.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:23.849Z,1516681163.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:24.241Z,1516681164.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:24.649Z,1516681164.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:25.044Z,1516681165.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:25.452Z,1516681165.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:25.850Z,1516681165.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:26.253Z,1516681166.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:26.682Z,1516681166.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:27.039Z,1516681167.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:27.442Z,1516681167.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:27.845Z,1516681167.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:28.240Z,1516681168.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:28.646Z,1516681168.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:29.054Z,1516681169.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:29.451Z,1516681169.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:29.854Z,1516681169.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:30.242Z,1516681170.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:30.647Z,1516681170.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:31.047Z,1516681171.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:31.451Z,1516681171.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:31.850Z,1516681171.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:32.253Z,1516681172.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:32.656Z,1516681172.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:33.049Z,1516681173.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:33.447Z,1516681173.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:33.842Z,1516681173.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:34.248Z,1516681174.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:34.649Z,1516681174.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:35.051Z,1516681175.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:35.453Z,1516681175.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:35.850Z,1516681175.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:36.248Z,1516681176.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:36.637Z,1516681176.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:37.048Z,1516681177.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:37.431Z,1516681177.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:37.858Z,1516681177.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:38.269Z,1516681178.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:38.660Z,1516681178.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:39.047Z,1516681179.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:39.440Z,1516681179.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:39.850Z,1516681179.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:40.247Z,1516681180.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:40.647Z,1516681180.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:41.048Z,1516681181.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:41.451Z,1516681181.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:41.860Z,1516681181.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:42.242Z,1516681182.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:42.641Z,1516681182.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:43.048Z,1516681183.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:43.453Z,1516681183.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:43.854Z,1516681183.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:44.257Z,1516681184.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:44.660Z,1516681184.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:45.051Z,1516681185.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:45.451Z,1516681185.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:45.868Z,1516681185.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:46.261Z,1516681186.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:46.658Z,1516681186.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:47.052Z,1516681187.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:47.430Z,1516681187.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:47.857Z,1516681187.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:48.262Z,1516681188.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:48.660Z,1516681188.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:49.033Z,1516681189.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:49.431Z,1516681189.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:49.862Z,1516681189.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:50.273Z,1516681190.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:50.672Z,1516681190.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:51.040Z,1516681191.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:51.441Z,1516681191.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:51.846Z,1516681191.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:51.848Z,1516681191.848 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T04:19:51.849Z,1516681191.849 [Default:CheckIn:C.Wait] Stopped 2018-01-23T04:19:51.849Z,1516681191.849 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T04:19:51.849Z,1516681191.849 [Default:CheckIn:D] Running Loop=1 2018-01-23T04:19:52.242Z,1516681192.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:52.245Z,1516681192.245 [Default:CheckIn:D] Stopped 2018-01-23T04:19:52.245Z,1516681192.245 [Default:CheckIn:E] Running Loop=1 2018-01-23T04:19:52.648Z,1516681192.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:52.672Z,1516681192.672 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.003092 min 2018-01-23T04:19:52.672Z,1516681192.672 [Default:CheckIn:E] Stopped 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn] Stopped 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn](INFO): Running loop #7 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn] Running Loop=7 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T04:19:52.673Z,1516681192.673 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T04:19:55.733Z,1516681195.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:55.873Z,1516681195.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:56.222Z,1516681196.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:56.624Z,1516681196.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:57.021Z,1516681197.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:57.396Z,1516681197.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:57.799Z,1516681197.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:58.202Z,1516681198.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:58.604Z,1516681198.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:59.006Z,1516681199.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:59.402Z,1516681199.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:19:59.803Z,1516681199.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:00.209Z,1516681200.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:00.599Z,1516681200.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:01.004Z,1516681201.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:01.405Z,1516681201.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:01.801Z,1516681201.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:02.160Z,1516681202.160 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T04:20:02.160Z,1516681202.160 [NAL9602] Data Fault, FailCount= 1 2018-01-23T04:20:02.160Z,1516681202.160 [NAL9602](ERROR): Data Fault 2018-01-23T04:20:02.210Z,1516681202.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:02.235Z,1516681202.235 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T04:20:02.560Z,1516681202.560 [NAL9602](INFO): Powering down 2018-01-23T04:20:02.612Z,1516681202.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:02.999Z,1516681202.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:03.404Z,1516681203.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:03.418Z,1516681203.418 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T04:20:03.418Z,1516681203.418 [NAL9602] No Fault, FailCount= 1 2018-01-23T04:20:03.806Z,1516681203.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:04.204Z,1516681204.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:04.604Z,1516681204.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:05.003Z,1516681205.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:05.398Z,1516681205.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:05.809Z,1516681205.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:06.202Z,1516681206.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:06.605Z,1516681206.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:07.000Z,1516681207.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:07.411Z,1516681207.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:07.801Z,1516681207.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:08.208Z,1516681208.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:08.613Z,1516681208.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:09.004Z,1516681209.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:09.402Z,1516681209.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:09.802Z,1516681209.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:10.208Z,1516681210.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:10.608Z,1516681210.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:11.006Z,1516681211.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:11.409Z,1516681211.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:11.804Z,1516681211.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:12.225Z,1516681212.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:12.596Z,1516681212.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:13.011Z,1516681213.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:13.412Z,1516681213.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:13.802Z,1516681213.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:14.194Z,1516681214.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:14.616Z,1516681214.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:15.018Z,1516681215.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:15.418Z,1516681215.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:15.816Z,1516681215.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:16.191Z,1516681216.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:16.596Z,1516681216.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:16.997Z,1516681216.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:17.399Z,1516681217.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:17.801Z,1516681217.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:18.205Z,1516681218.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:18.599Z,1516681218.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:19.006Z,1516681219.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:19.401Z,1516681219.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:19.799Z,1516681219.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:20.206Z,1516681220.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:20.597Z,1516681220.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:20.000Z,1516681221.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:21.402Z,1516681221.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:21.802Z,1516681221.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:22.200Z,1516681222.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:22.598Z,1516681222.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:23.005Z,1516681223.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:23.401Z,1516681223.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:23.804Z,1516681223.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:24.196Z,1516681224.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:24.599Z,1516681224.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:25.004Z,1516681225.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:25.395Z,1516681225.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:25.805Z,1516681225.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:26.199Z,1516681226.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:26.595Z,1516681226.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:26.998Z,1516681226.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:27.397Z,1516681227.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:27.798Z,1516681227.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:28.200Z,1516681228.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:28.608Z,1516681228.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:29.000Z,1516681229.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:29.401Z,1516681229.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:29.799Z,1516681229.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:30.205Z,1516681230.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:30.599Z,1516681230.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:31.008Z,1516681231.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:31.399Z,1516681231.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:31.799Z,1516681231.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:32.199Z,1516681232.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:32.606Z,1516681232.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:32.960Z,1516681232.960 [NAL9602](INFO): Powering up NAL9602 2018-01-23T04:20:33.013Z,1516681233.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:33.404Z,1516681233.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:33.804Z,1516681233.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:34.203Z,1516681234.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:34.613Z,1516681234.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:35.004Z,1516681235.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:35.004Z,1516681235.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-01-23T04:20:35.004Z,1516681235.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:20:35.006Z,1516681235.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:35.006Z,1516681235.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-01-23T04:20:35.006Z,1516681235.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:20:35.008Z,1516681235.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:35.008Z,1516681235.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22 2018-01-23T04:20:35.008Z,1516681235.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:20:35.056Z,1516681235.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:20:35.056Z,1516681235.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:20:35.057Z,1516681235.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:20:35.412Z,1516681235.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:20:35.412Z,1516681235.412 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-01-23T04:20:35.412Z,1516681235.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:20:35.412Z,1516681235.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-01-23T04:20:35.413Z,1516681235.413 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:20:35.413Z,1516681235.413 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22 2018-01-23T04:20:35.810Z,1516681235.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:20:35.810Z,1516681235.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:20:35.810Z,1516681235.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:20:35.811Z,1516681235.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:20:35.811Z,1516681235.811 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:20:35.812Z,1516681235.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:20:35.812Z,1516681235.812 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:20:35.812Z,1516681235.812 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:20:35.813Z,1516681235.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:20:36.205Z,1516681236.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:20:36.205Z,1516681236.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:36.603Z,1516681236.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:20:36.604Z,1516681236.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:37.004Z,1516681237.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:20:37.005Z,1516681237.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:37.400Z,1516681237.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:20:37.401Z,1516681237.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:37.806Z,1516681237.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:20:37.807Z,1516681237.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:38.204Z,1516681238.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:20:38.205Z,1516681238.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:38.599Z,1516681238.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:20:38.600Z,1516681238.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:38.000Z,1516681239.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:20:39.001Z,1516681239.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:39.404Z,1516681239.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:20:39.405Z,1516681239.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:39.804Z,1516681239.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:20:39.805Z,1516681239.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:40.204Z,1516681240.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:20:40.205Z,1516681240.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:40.608Z,1516681240.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:20:40.609Z,1516681240.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:40.999Z,1516681240.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:20:41.000Z,1516681241.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:41.399Z,1516681241.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:20:41.400Z,1516681241.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:41.801Z,1516681241.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:20:41.802Z,1516681241.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:42.208Z,1516681242.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:20:42.209Z,1516681242.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:42.604Z,1516681242.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:20:42.605Z,1516681242.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:43.000Z,1516681243.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:20:43.001Z,1516681243.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:43.407Z,1516681243.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:20:43.408Z,1516681243.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:43.809Z,1516681243.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:20:43.810Z,1516681243.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:44.160Z,1516681244.160 [NAL9602](INFO): NAL9602 initialized 2018-01-23T04:20:44.211Z,1516681244.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:20:44.212Z,1516681244.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:44.602Z,1516681244.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:20:44.603Z,1516681244.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:45.014Z,1516681245.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:20:45.015Z,1516681245.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:45.413Z,1516681245.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:20:45.414Z,1516681245.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:45.809Z,1516681245.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:20:45.810Z,1516681245.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:46.212Z,1516681246.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:20:46.213Z,1516681246.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:46.594Z,1516681246.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:20:46.595Z,1516681246.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:46.992Z,1516681246.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:20:46.993Z,1516681246.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:47.404Z,1516681247.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:20:47.405Z,1516681247.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:47.819Z,1516681247.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:20:47.820Z,1516681247.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:48.224Z,1516681248.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:20:48.225Z,1516681248.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:48.617Z,1516681248.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:20:48.618Z,1516681248.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:49.012Z,1516681249.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:20:49.013Z,1516681249.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:49.390Z,1516681249.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:20:49.391Z,1516681249.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:49.799Z,1516681249.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:20:49.800Z,1516681249.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:50.196Z,1516681250.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:20:50.197Z,1516681250.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:50.595Z,1516681250.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:20:50.596Z,1516681250.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:51.026Z,1516681251.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:20:51.031Z,1516681251.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:51.420Z,1516681251.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:20:51.421Z,1516681251.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:51.812Z,1516681251.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:20:51.813Z,1516681251.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:52.204Z,1516681252.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:20:52.205Z,1516681252.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:52.599Z,1516681252.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:20:52.600Z,1516681252.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:53.000Z,1516681253.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:20:53.001Z,1516681253.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:56.096Z,1516681256.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:56.261Z,1516681256.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:56.593Z,1516681256.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:56.990Z,1516681256.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:57.383Z,1516681257.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:57.765Z,1516681257.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:58.169Z,1516681258.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:58.565Z,1516681258.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:58.972Z,1516681258.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:59.370Z,1516681259.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:20:59.768Z,1516681259.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:00.163Z,1516681260.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:00.564Z,1516681260.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:00.965Z,1516681260.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:01.364Z,1516681261.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:01.777Z,1516681261.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:02.175Z,1516681262.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:02.573Z,1516681262.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:02.964Z,1516681262.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:03.369Z,1516681263.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:03.766Z,1516681263.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:04.165Z,1516681264.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:04.564Z,1516681264.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:04.969Z,1516681264.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:05.369Z,1516681265.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:05.771Z,1516681265.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:06.164Z,1516681266.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:06.565Z,1516681266.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:06.964Z,1516681266.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:07.364Z,1516681267.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:07.771Z,1516681267.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:08.175Z,1516681268.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:08.570Z,1516681268.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:08.964Z,1516681268.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:09.368Z,1516681269.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:09.764Z,1516681269.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:10.165Z,1516681270.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:10.569Z,1516681270.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:10.970Z,1516681270.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:11.370Z,1516681271.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:11.769Z,1516681271.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:12.164Z,1516681272.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:12.564Z,1516681272.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:12.969Z,1516681272.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:13.369Z,1516681273.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:13.781Z,1516681273.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:14.171Z,1516681274.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:14.577Z,1516681274.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:14.965Z,1516681274.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:15.369Z,1516681275.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:15.765Z,1516681275.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:16.165Z,1516681276.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:16.568Z,1516681276.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:16.977Z,1516681276.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:17.382Z,1516681277.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:17.772Z,1516681277.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:18.164Z,1516681278.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:18.564Z,1516681278.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:18.973Z,1516681278.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:19.363Z,1516681279.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:19.776Z,1516681279.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:20.170Z,1516681280.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:20.573Z,1516681280.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:20.964Z,1516681280.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:21.367Z,1516681281.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:21.763Z,1516681281.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:22.166Z,1516681282.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:22.569Z,1516681282.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:22.969Z,1516681282.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:23.370Z,1516681283.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:23.777Z,1516681283.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:24.163Z,1516681284.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:24.564Z,1516681284.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:24.966Z,1516681284.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:25.363Z,1516681285.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:25.774Z,1516681285.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:26.174Z,1516681286.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:26.573Z,1516681286.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:26.964Z,1516681286.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:27.373Z,1516681287.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:27.773Z,1516681287.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:28.164Z,1516681288.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:28.563Z,1516681288.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:28.973Z,1516681288.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:29.373Z,1516681289.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:29.773Z,1516681289.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:30.173Z,1516681290.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:30.568Z,1516681290.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:30.969Z,1516681290.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:31.380Z,1516681291.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:31.779Z,1516681291.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:32.182Z,1516681292.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:32.575Z,1516681292.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:32.972Z,1516681292.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:33.370Z,1516681293.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:33.777Z,1516681293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:34.173Z,1516681294.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:34.572Z,1516681294.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:34.978Z,1516681294.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:35.384Z,1516681295.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:35.777Z,1516681295.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:36.172Z,1516681296.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:36.580Z,1516681296.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:36.957Z,1516681296.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:37.381Z,1516681297.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:37.787Z,1516681297.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:38.185Z,1516681298.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:38.590Z,1516681298.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:38.967Z,1516681298.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:39.361Z,1516681299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:39.765Z,1516681299.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:40.165Z,1516681300.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:40.573Z,1516681300.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:40.996Z,1516681300.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:41.370Z,1516681301.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:41.797Z,1516681301.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:42.165Z,1516681302.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:42.573Z,1516681302.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:42.972Z,1516681302.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:43.368Z,1516681303.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:43.797Z,1516681303.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:44.171Z,1516681304.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:44.572Z,1516681304.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:44.965Z,1516681304.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:45.368Z,1516681305.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:45.781Z,1516681305.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:46.177Z,1516681306.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:46.577Z,1516681306.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:46.967Z,1516681306.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:47.369Z,1516681307.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:47.775Z,1516681307.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:48.178Z,1516681308.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:48.575Z,1516681308.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:48.970Z,1516681308.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:49.369Z,1516681309.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:49.774Z,1516681309.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:50.174Z,1516681310.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:50.581Z,1516681310.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:50.974Z,1516681310.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:51.373Z,1516681311.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:51.776Z,1516681311.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:52.182Z,1516681312.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:52.579Z,1516681312.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:52.974Z,1516681312.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:53.374Z,1516681313.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:56.474Z,1516681316.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:56.614Z,1516681316.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:56.969Z,1516681316.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:57.350Z,1516681317.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:57.743Z,1516681317.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:58.143Z,1516681318.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:58.549Z,1516681318.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:58.943Z,1516681318.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:21:58.981Z,1516681318.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:59.354Z,1516681319.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:21:59.749Z,1516681319.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:00.168Z,1516681320.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:00.535Z,1516681320.535 [PNI_TCM](ERROR): CRC does not match. Expected:0x11161 got:0x16956 2018-01-23T04:22:00.576Z,1516681320.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:00.944Z,1516681320.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:01.341Z,1516681321.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:01.753Z,1516681321.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:02.151Z,1516681322.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:02.552Z,1516681322.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:02.942Z,1516681322.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:03.351Z,1516681323.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:03.751Z,1516681323.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:04.153Z,1516681324.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:04.552Z,1516681324.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:04.970Z,1516681324.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:05.342Z,1516681325.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:05.752Z,1516681325.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:06.152Z,1516681326.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:06.572Z,1516681326.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:06.933Z,1516681326.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:22:06.977Z,1516681326.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:07.336Z,1516681327.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x43169 got:0x57105 2018-01-23T04:22:07.373Z,1516681327.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:07.745Z,1516681327.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:08.165Z,1516681328.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:08.548Z,1516681328.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x16649 got:0x7106 2018-01-23T04:22:08.582Z,1516681328.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:08.961Z,1516681328.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:09.346Z,1516681329.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:09.757Z,1516681329.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:10.149Z,1516681330.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:10.543Z,1516681330.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:10.965Z,1516681330.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:11.385Z,1516681331.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:11.763Z,1516681331.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:12.155Z,1516681332.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:12.553Z,1516681332.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:12.958Z,1516681332.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:13.338Z,1516681333.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:13.748Z,1516681333.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:14.165Z,1516681334.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:14.564Z,1516681334.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:14.957Z,1516681334.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:15.361Z,1516681335.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:15.758Z,1516681335.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:16.132Z,1516681336.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:16.531Z,1516681336.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:16.966Z,1516681336.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:17.377Z,1516681337.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:17.785Z,1516681337.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:18.137Z,1516681338.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:18.566Z,1516681338.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:18.955Z,1516681338.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:19.339Z,1516681339.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:19.745Z,1516681339.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:20.142Z,1516681340.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:20.546Z,1516681340.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:20.943Z,1516681340.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:21.344Z,1516681341.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:21.739Z,1516681341.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:22.150Z,1516681342.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:22.539Z,1516681342.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:22.983Z,1516681342.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:23.357Z,1516681343.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:23.755Z,1516681343.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:24.141Z,1516681344.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:24.545Z,1516681344.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:24.959Z,1516681344.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:25.329Z,1516681345.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:25.757Z,1516681345.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:26.162Z,1516681346.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:26.566Z,1516681346.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:26.968Z,1516681346.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:27.343Z,1516681347.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:27.745Z,1516681347.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:28.149Z,1516681348.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:28.540Z,1516681348.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:28.945Z,1516681348.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:29.346Z,1516681349.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:29.753Z,1516681349.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:30.138Z,1516681350.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:30.538Z,1516681350.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:30.941Z,1516681350.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:31.339Z,1516681351.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:31.756Z,1516681351.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:32.151Z,1516681352.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:32.551Z,1516681352.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:32.953Z,1516681352.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:33.340Z,1516681353.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:33.739Z,1516681353.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:34.142Z,1516681354.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:34.538Z,1516681354.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:34.951Z,1516681354.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:35.354Z,1516681355.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:35.751Z,1516681355.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:36.137Z,1516681356.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:36.548Z,1516681356.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:36.942Z,1516681356.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:37.340Z,1516681357.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:37.753Z,1516681357.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:38.158Z,1516681358.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:38.550Z,1516681358.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:38.950Z,1516681358.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:39.349Z,1516681359.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:39.750Z,1516681359.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:40.148Z,1516681360.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:40.542Z,1516681360.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:40.950Z,1516681360.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:41.354Z,1516681361.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:41.752Z,1516681361.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:42.149Z,1516681362.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:42.552Z,1516681362.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:42.953Z,1516681362.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:43.329Z,1516681363.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:43.753Z,1516681363.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:44.162Z,1516681364.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:44.562Z,1516681364.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:44.962Z,1516681364.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:45.357Z,1516681365.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:45.740Z,1516681365.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:46.140Z,1516681366.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:46.538Z,1516681366.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:46.942Z,1516681366.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:47.354Z,1516681367.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:47.753Z,1516681367.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:48.139Z,1516681368.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:48.542Z,1516681368.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:48.943Z,1516681368.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:49.340Z,1516681369.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:49.750Z,1516681369.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:50.151Z,1516681370.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:50.549Z,1516681370.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:50.951Z,1516681370.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:51.351Z,1516681371.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:51.749Z,1516681371.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:52.148Z,1516681372.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:52.552Z,1516681372.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:52.953Z,1516681372.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:53.356Z,1516681373.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:53.760Z,1516681373.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:56.835Z,1516681376.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:56.984Z,1516681376.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:57.309Z,1516681377.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:57.709Z,1516681377.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:58.109Z,1516681378.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:58.500Z,1516681378.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:58.899Z,1516681378.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:59.301Z,1516681379.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:22:59.712Z,1516681379.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:00.116Z,1516681380.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:00.509Z,1516681380.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:00.908Z,1516681380.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:01.299Z,1516681381.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:01.700Z,1516681381.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:02.101Z,1516681382.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:02.499Z,1516681382.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:02.910Z,1516681382.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:03.313Z,1516681383.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:03.709Z,1516681383.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:04.113Z,1516681384.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:04.509Z,1516681384.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:04.900Z,1516681384.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:05.302Z,1516681385.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:05.708Z,1516681385.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:06.109Z,1516681386.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:06.509Z,1516681386.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:06.910Z,1516681386.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:07.301Z,1516681387.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:07.709Z,1516681387.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:08.105Z,1516681388.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:08.511Z,1516681388.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:08.910Z,1516681388.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:09.313Z,1516681389.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:09.713Z,1516681389.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:10.109Z,1516681390.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:10.501Z,1516681390.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:10.909Z,1516681390.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:11.302Z,1516681391.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:11.706Z,1516681391.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:12.110Z,1516681392.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:12.510Z,1516681392.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:12.914Z,1516681392.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:13.302Z,1516681393.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:13.701Z,1516681393.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:14.107Z,1516681394.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:14.510Z,1516681394.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:14.910Z,1516681394.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:15.325Z,1516681395.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:15.714Z,1516681395.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:16.102Z,1516681396.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:16.507Z,1516681396.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:16.917Z,1516681396.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:17.312Z,1516681397.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:17.711Z,1516681397.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:18.111Z,1516681398.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:18.507Z,1516681398.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:18.910Z,1516681398.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:19.325Z,1516681399.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:19.710Z,1516681399.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:20.107Z,1516681400.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:20.510Z,1516681400.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:20.910Z,1516681400.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:21.314Z,1516681401.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:21.725Z,1516681401.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:22.102Z,1516681402.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:22.507Z,1516681402.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:22.909Z,1516681402.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:23.316Z,1516681403.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:23.720Z,1516681403.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:24.103Z,1516681404.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:24.505Z,1516681404.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:24.910Z,1516681404.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:25.320Z,1516681405.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:25.714Z,1516681405.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:26.107Z,1516681406.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:26.511Z,1516681406.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:26.912Z,1516681406.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:27.315Z,1516681407.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:27.724Z,1516681407.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:28.104Z,1516681408.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:28.508Z,1516681408.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:28.913Z,1516681408.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:29.323Z,1516681409.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:29.721Z,1516681409.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:30.105Z,1516681410.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:30.512Z,1516681410.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:30.915Z,1516681410.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:31.325Z,1516681411.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:31.717Z,1516681411.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:32.108Z,1516681412.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:32.514Z,1516681412.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:32.912Z,1516681412.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:33.325Z,1516681413.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:33.714Z,1516681413.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:34.106Z,1516681414.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:34.508Z,1516681414.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:34.915Z,1516681414.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:35.312Z,1516681415.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:35.720Z,1516681415.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:36.108Z,1516681416.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:36.108Z,1516681416.108 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-01-23T04:23:36.108Z,1516681416.108 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:23:36.110Z,1516681416.110 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:36.110Z,1516681416.110 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-01-23T04:23:36.110Z,1516681416.110 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:23:36.112Z,1516681416.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:36.112Z,1516681416.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23 2018-01-23T04:23:36.112Z,1516681416.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:23:36.123Z,1516681416.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:23:36.123Z,1516681416.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:23:36.124Z,1516681416.124 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:23:36.526Z,1516681416.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:23:36.526Z,1516681416.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-01-23T04:23:36.526Z,1516681416.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:23:36.526Z,1516681416.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-01-23T04:23:36.531Z,1516681416.531 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:23:36.531Z,1516681416.531 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23 2018-01-23T04:23:36.912Z,1516681416.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:23:36.913Z,1516681416.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:23:36.913Z,1516681416.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:23:36.913Z,1516681416.913 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:23:36.914Z,1516681416.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:23:36.914Z,1516681416.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:23:36.915Z,1516681416.915 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:23:36.915Z,1516681416.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:23:36.915Z,1516681416.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:23:37.324Z,1516681417.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:23:37.325Z,1516681417.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:37.713Z,1516681417.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:23:37.714Z,1516681417.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:38.091Z,1516681418.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:23:38.092Z,1516681418.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:38.496Z,1516681418.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:23:38.497Z,1516681418.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:38.925Z,1516681418.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:23:38.926Z,1516681418.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:39.322Z,1516681419.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:23:39.324Z,1516681419.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:39.729Z,1516681419.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:23:39.729Z,1516681419.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:40.115Z,1516681420.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:23:40.116Z,1516681420.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:40.521Z,1516681420.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:23:40.522Z,1516681420.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:40.925Z,1516681420.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:23:40.926Z,1516681420.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:41.321Z,1516681421.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:23:41.322Z,1516681421.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:41.721Z,1516681421.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:23:41.722Z,1516681421.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:42.117Z,1516681422.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:23:42.118Z,1516681422.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:42.497Z,1516681422.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:23:42.498Z,1516681422.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:42.905Z,1516681422.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:23:42.906Z,1516681422.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:43.309Z,1516681423.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:23:43.310Z,1516681423.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:43.702Z,1516681423.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:23:43.703Z,1516681423.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:44.100Z,1516681424.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:23:44.101Z,1516681424.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:44.499Z,1516681424.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:23:44.500Z,1516681424.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:44.902Z,1516681424.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:23:44.903Z,1516681424.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:45.305Z,1516681425.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:23:45.306Z,1516681425.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:45.702Z,1516681425.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:23:45.703Z,1516681425.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:46.104Z,1516681426.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:23:46.105Z,1516681426.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:46.500Z,1516681426.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:23:46.501Z,1516681426.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:46.902Z,1516681426.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:23:46.903Z,1516681426.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:47.305Z,1516681427.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:23:47.306Z,1516681427.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:47.702Z,1516681427.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:23:47.703Z,1516681427.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:48.104Z,1516681428.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:23:48.105Z,1516681428.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:48.498Z,1516681428.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:23:48.499Z,1516681428.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:48.909Z,1516681428.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:23:48.910Z,1516681428.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:49.313Z,1516681429.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:23:49.314Z,1516681429.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:49.706Z,1516681429.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:23:49.707Z,1516681429.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:50.100Z,1516681430.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:23:50.101Z,1516681430.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:50.499Z,1516681430.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:23:50.500Z,1516681430.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:50.908Z,1516681430.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:23:50.909Z,1516681430.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:51.305Z,1516681431.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:23:51.306Z,1516681431.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:51.705Z,1516681431.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:23:51.706Z,1516681431.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:52.098Z,1516681432.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:23:52.099Z,1516681432.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:52.508Z,1516681432.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:23:52.509Z,1516681432.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:52.901Z,1516681432.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:23:52.902Z,1516681432.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:53.305Z,1516681433.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:23:53.306Z,1516681433.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:53.706Z,1516681433.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:23:53.707Z,1516681433.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:54.109Z,1516681434.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:23:54.110Z,1516681434.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:57.201Z,1516681437.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:57.337Z,1516681437.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:57.690Z,1516681437.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:58.093Z,1516681438.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:58.490Z,1516681438.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:58.873Z,1516681438.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:59.267Z,1516681439.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:23:59.673Z,1516681439.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:00.074Z,1516681440.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:00.499Z,1516681440.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:00.874Z,1516681440.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:01.269Z,1516681441.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:01.672Z,1516681441.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:02.070Z,1516681442.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:02.473Z,1516681442.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:02.868Z,1516681442.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:03.270Z,1516681443.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:03.678Z,1516681443.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:04.080Z,1516681444.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:04.468Z,1516681444.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:04.873Z,1516681444.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:05.269Z,1516681445.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:05.668Z,1516681445.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:06.073Z,1516681446.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:06.474Z,1516681446.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:06.873Z,1516681446.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:07.268Z,1516681447.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:07.668Z,1516681447.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:08.067Z,1516681448.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:08.469Z,1516681448.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:08.867Z,1516681448.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:09.277Z,1516681449.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:09.674Z,1516681449.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:10.073Z,1516681450.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:10.467Z,1516681450.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:10.873Z,1516681450.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:11.269Z,1516681451.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:11.671Z,1516681451.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:12.077Z,1516681452.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:12.107Z,1516681452.107 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:24:12.477Z,1516681452.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:12.881Z,1516681452.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:13.267Z,1516681453.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:13.668Z,1516681453.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:14.067Z,1516681454.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:14.470Z,1516681454.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:14.869Z,1516681454.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:15.278Z,1516681455.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:15.681Z,1516681455.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:16.088Z,1516681456.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:16.475Z,1516681456.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:16.875Z,1516681456.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:17.279Z,1516681457.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:17.673Z,1516681457.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:18.082Z,1516681458.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:18.488Z,1516681458.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:18.882Z,1516681458.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:19.276Z,1516681459.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:19.684Z,1516681459.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:20.060Z,1516681460.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:20.485Z,1516681460.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:20.867Z,1516681460.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:21.270Z,1516681461.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:21.693Z,1516681461.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:22.092Z,1516681462.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:22.462Z,1516681462.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:22.897Z,1516681462.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:23.265Z,1516681463.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:23.669Z,1516681463.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:24.075Z,1516681464.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:24.473Z,1516681464.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:24.870Z,1516681464.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:25.266Z,1516681465.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:25.669Z,1516681465.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:26.066Z,1516681466.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:26.466Z,1516681466.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:26.869Z,1516681466.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:27.270Z,1516681467.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:27.674Z,1516681467.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:28.103Z,1516681468.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:28.464Z,1516681468.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:28.866Z,1516681468.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:29.271Z,1516681469.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:29.666Z,1516681469.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:30.073Z,1516681470.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:30.474Z,1516681470.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:30.877Z,1516681470.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:31.271Z,1516681471.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:31.668Z,1516681471.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:32.067Z,1516681472.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:32.476Z,1516681472.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:32.872Z,1516681472.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:33.277Z,1516681473.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:33.681Z,1516681473.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:34.078Z,1516681474.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:34.466Z,1516681474.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:34.869Z,1516681474.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:35.270Z,1516681475.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:35.673Z,1516681475.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:36.077Z,1516681476.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:36.481Z,1516681476.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:36.877Z,1516681476.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:37.273Z,1516681477.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:37.671Z,1516681477.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:38.077Z,1516681478.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:38.470Z,1516681478.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:38.880Z,1516681478.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:39.277Z,1516681479.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:39.682Z,1516681479.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:40.078Z,1516681480.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:40.469Z,1516681480.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:40.870Z,1516681480.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:41.272Z,1516681481.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:41.681Z,1516681481.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:42.093Z,1516681482.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:42.485Z,1516681482.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:42.881Z,1516681482.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:43.276Z,1516681483.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:43.676Z,1516681483.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:44.069Z,1516681484.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:44.476Z,1516681484.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:44.884Z,1516681484.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:45.279Z,1516681485.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:45.691Z,1516681485.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:46.084Z,1516681486.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:46.476Z,1516681486.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:46.877Z,1516681486.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:47.282Z,1516681487.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:47.680Z,1516681487.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:48.093Z,1516681488.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:48.488Z,1516681488.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:48.889Z,1516681488.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:49.283Z,1516681489.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:49.688Z,1516681489.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:50.081Z,1516681490.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:50.485Z,1516681490.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:50.867Z,1516681490.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:51.297Z,1516681491.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:51.701Z,1516681491.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:52.095Z,1516681492.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:52.469Z,1516681492.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:52.864Z,1516681492.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:52.868Z,1516681492.868 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T04:19:52.7Z 2018-01-23T04:24:52.868Z,1516681492.868 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:24:52.868Z,1516681492.868 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:24:53.277Z,1516681493.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:53.798Z,1516681493.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:54.074Z,1516681494.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:57.227Z,1516681497.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:57.303Z,1516681497.303 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0028.lzma 2018-01-23T04:24:57.365Z,1516681497.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:57.719Z,1516681497.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:58.077Z,1516681498.077 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0028.lzma.bak 2018-01-23T04:24:58.077Z,1516681498.077 [DataOverHttps](INFO): SBD MOMSN=7754989 2018-01-23T04:24:58.128Z,1516681498.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:58.752Z,1516681498.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:24:58.919Z,1516681498.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:02.068Z,1516681502.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:02.224Z,1516681502.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:02.551Z,1516681502.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:02.948Z,1516681502.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:03.332Z,1516681503.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:03.732Z,1516681503.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:06.861Z,1516681506.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:10.888Z,1516681510.888 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180123T031358/Express0029.lzma 2018-01-23T04:25:10.943Z,1516681510.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:11.101Z,1516681511.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:11.798Z,1516681511.798 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0029.lzma.bak 2018-01-23T04:25:11.798Z,1516681511.798 [DataOverHttps](INFO): SBD MOMSN=7754991 2018-01-23T04:25:11.847Z,1516681511.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:12.493Z,1516681512.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:12.501Z,1516681512.501 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:25:12.501Z,1516681512.501 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:25:12.501Z,1516681512.501 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:25:12.629Z,1516681512.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:17.144Z,1516681517.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:17.301Z,1516681517.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:17.642Z,1516681517.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:18.058Z,1516681518.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:18.424Z,1516681518.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:18.866Z,1516681518.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:19.282Z,1516681519.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:19.668Z,1516681519.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:20.033Z,1516681520.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:20.440Z,1516681520.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:20.813Z,1516681520.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:21.231Z,1516681521.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:21.653Z,1516681521.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:22.031Z,1516681522.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:22.459Z,1516681522.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:22.854Z,1516681522.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:23.231Z,1516681523.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:23.682Z,1516681523.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:24.050Z,1516681524.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:24.446Z,1516681524.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:24.846Z,1516681524.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:25.260Z,1516681525.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:25.652Z,1516681525.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:26.041Z,1516681526.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:26.473Z,1516681526.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:26.873Z,1516681526.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:27.248Z,1516681527.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:27.659Z,1516681527.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:28.053Z,1516681528.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:28.468Z,1516681528.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:28.862Z,1516681528.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:29.229Z,1516681529.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:29.632Z,1516681529.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:30.066Z,1516681530.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:30.436Z,1516681530.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:30.821Z,1516681530.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:31.228Z,1516681531.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:31.629Z,1516681531.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:32.028Z,1516681532.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:32.424Z,1516681532.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:32.813Z,1516681532.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:33.225Z,1516681533.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:33.628Z,1516681533.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:34.013Z,1516681534.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:34.440Z,1516681534.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:34.844Z,1516681534.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:35.238Z,1516681535.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:35.612Z,1516681535.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:36.032Z,1516681536.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:36.414Z,1516681536.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:36.825Z,1516681536.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:37.230Z,1516681537.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:37.619Z,1516681537.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:38.019Z,1516681538.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:38.417Z,1516681538.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:38.815Z,1516681538.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:39.214Z,1516681539.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:39.615Z,1516681539.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:40.014Z,1516681540.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:40.418Z,1516681540.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:40.828Z,1516681540.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:41.218Z,1516681541.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:41.614Z,1516681541.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:42.015Z,1516681542.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:42.416Z,1516681542.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:42.814Z,1516681542.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:43.221Z,1516681543.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:43.622Z,1516681543.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:44.025Z,1516681544.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:44.417Z,1516681544.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:44.814Z,1516681544.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:45.215Z,1516681545.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:45.622Z,1516681545.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:46.025Z,1516681546.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:46.429Z,1516681546.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:46.834Z,1516681546.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:47.226Z,1516681547.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:47.617Z,1516681547.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:48.025Z,1516681548.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:48.423Z,1516681548.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:48.823Z,1516681548.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:49.235Z,1516681549.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:49.633Z,1516681549.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:50.028Z,1516681550.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:50.425Z,1516681550.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:50.823Z,1516681550.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:51.223Z,1516681551.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:51.620Z,1516681551.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:52.023Z,1516681552.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:52.427Z,1516681552.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:52.842Z,1516681552.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:53.226Z,1516681553.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:53.623Z,1516681553.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:54.035Z,1516681554.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:54.424Z,1516681554.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:54.823Z,1516681554.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:55.237Z,1516681555.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:55.637Z,1516681555.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:56.037Z,1516681556.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:56.433Z,1516681556.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:56.832Z,1516681556.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:57.212Z,1516681557.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:57.617Z,1516681557.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:58.041Z,1516681558.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:58.445Z,1516681558.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:58.844Z,1516681558.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:59.219Z,1516681559.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:25:59.616Z,1516681559.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:00.017Z,1516681560.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:00.416Z,1516681560.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:00.821Z,1516681560.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:01.227Z,1516681561.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:01.629Z,1516681561.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:02.025Z,1516681562.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:02.416Z,1516681562.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:02.815Z,1516681562.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:03.216Z,1516681563.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:03.616Z,1516681563.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:04.018Z,1516681564.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:04.433Z,1516681564.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:04.828Z,1516681564.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:05.225Z,1516681565.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:05.617Z,1516681565.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:06.015Z,1516681566.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:06.420Z,1516681566.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:06.819Z,1516681566.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:07.225Z,1516681567.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:07.633Z,1516681567.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:08.033Z,1516681568.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:08.415Z,1516681568.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:08.817Z,1516681568.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:09.217Z,1516681569.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:09.616Z,1516681569.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:10.017Z,1516681570.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:10.426Z,1516681570.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:10.828Z,1516681570.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:11.229Z,1516681571.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:11.617Z,1516681571.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:12.014Z,1516681572.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:12.418Z,1516681572.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:12.818Z,1516681572.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:13.226Z,1516681573.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:16.357Z,1516681576.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:16.509Z,1516681576.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:16.829Z,1516681576.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:17.228Z,1516681577.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:17.628Z,1516681577.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:18.024Z,1516681578.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:18.430Z,1516681578.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:18.837Z,1516681578.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:19.231Z,1516681579.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:19.625Z,1516681579.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:20.024Z,1516681580.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:20.425Z,1516681580.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:20.824Z,1516681580.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:21.233Z,1516681581.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:21.630Z,1516681581.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:22.029Z,1516681582.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:22.422Z,1516681582.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:22.824Z,1516681582.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:23.224Z,1516681583.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:23.633Z,1516681583.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:24.027Z,1516681584.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:24.429Z,1516681584.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:24.830Z,1516681584.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:25.237Z,1516681585.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:25.628Z,1516681585.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:26.026Z,1516681586.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:26.428Z,1516681586.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:26.836Z,1516681586.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:27.234Z,1516681587.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:27.634Z,1516681587.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:28.035Z,1516681588.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:28.431Z,1516681588.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:28.831Z,1516681588.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:29.236Z,1516681589.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:29.631Z,1516681589.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:30.031Z,1516681590.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:30.447Z,1516681590.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:30.838Z,1516681590.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:31.243Z,1516681591.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:31.631Z,1516681591.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:32.037Z,1516681592.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:32.416Z,1516681592.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:32.845Z,1516681592.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:33.251Z,1516681593.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:33.648Z,1516681593.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:34.048Z,1516681594.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:34.452Z,1516681594.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:34.826Z,1516681594.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:35.233Z,1516681595.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:35.629Z,1516681595.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:36.030Z,1516681596.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:36.430Z,1516681596.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:36.830Z,1516681596.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:37.237Z,1516681597.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:37.237Z,1516681597.237 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-01-23T04:26:37.237Z,1516681597.237 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:26:37.239Z,1516681597.239 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:37.239Z,1516681597.239 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-01-23T04:26:37.239Z,1516681597.239 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:26:37.241Z,1516681597.241 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:37.241Z,1516681597.241 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24 2018-01-23T04:26:37.241Z,1516681597.241 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:26:37.277Z,1516681597.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:26:37.278Z,1516681597.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:26:37.278Z,1516681597.278 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:26:37.646Z,1516681597.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:26:37.647Z,1516681597.647 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-01-23T04:26:37.647Z,1516681597.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:26:37.647Z,1516681597.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-01-23T04:26:37.648Z,1516681597.648 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:26:37.648Z,1516681597.648 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24 2018-01-23T04:26:38.026Z,1516681598.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:26:38.026Z,1516681598.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:26:38.027Z,1516681598.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:26:38.027Z,1516681598.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:26:38.028Z,1516681598.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:26:38.028Z,1516681598.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:26:38.028Z,1516681598.028 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:26:38.029Z,1516681598.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:26:38.029Z,1516681598.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:26:38.441Z,1516681598.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:26:38.441Z,1516681598.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:38.832Z,1516681598.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:26:38.833Z,1516681598.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:39.249Z,1516681599.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:26:39.251Z,1516681599.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:39.639Z,1516681599.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:26:39.640Z,1516681599.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:40.037Z,1516681600.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:26:40.038Z,1516681600.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:40.432Z,1516681600.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:26:40.433Z,1516681600.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:40.832Z,1516681600.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:26:40.833Z,1516681600.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:41.237Z,1516681601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:26:41.237Z,1516681601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:41.627Z,1516681601.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:26:41.628Z,1516681601.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:42.036Z,1516681602.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:26:42.037Z,1516681602.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:42.445Z,1516681602.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:26:42.446Z,1516681602.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:42.838Z,1516681602.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:26:42.840Z,1516681602.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:43.244Z,1516681603.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:26:43.245Z,1516681603.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:43.614Z,1516681603.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:26:43.641Z,1516681603.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:44.038Z,1516681604.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:26:44.039Z,1516681604.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:44.415Z,1516681604.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:26:44.416Z,1516681604.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:44.820Z,1516681604.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:26:44.821Z,1516681604.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:45.240Z,1516681605.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:26:45.240Z,1516681605.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:45.641Z,1516681605.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:26:45.642Z,1516681605.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:46.044Z,1516681606.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:26:46.045Z,1516681606.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:46.440Z,1516681606.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:26:46.441Z,1516681606.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:46.848Z,1516681606.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:26:46.849Z,1516681606.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:47.219Z,1516681607.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:26:47.220Z,1516681607.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:47.628Z,1516681607.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:26:47.629Z,1516681607.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:48.022Z,1516681608.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:26:48.023Z,1516681608.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:48.429Z,1516681608.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:26:48.430Z,1516681608.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:48.829Z,1516681608.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:26:48.830Z,1516681608.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:49.225Z,1516681609.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:26:49.227Z,1516681609.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:49.624Z,1516681609.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:26:49.625Z,1516681609.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:50.018Z,1516681610.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:26:50.023Z,1516681610.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:50.424Z,1516681610.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:26:50.425Z,1516681610.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:50.823Z,1516681610.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:26:50.824Z,1516681610.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:51.232Z,1516681611.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:26:51.233Z,1516681611.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:51.629Z,1516681611.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:26:51.630Z,1516681611.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:52.036Z,1516681612.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:26:52.037Z,1516681612.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:52.426Z,1516681612.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:26:52.428Z,1516681612.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:52.823Z,1516681612.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:26:52.824Z,1516681612.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:53.236Z,1516681613.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:26:53.237Z,1516681613.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:53.629Z,1516681613.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:26:53.630Z,1516681613.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:54.032Z,1516681614.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:26:54.033Z,1516681614.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:54.424Z,1516681614.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:26:54.425Z,1516681614.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:54.823Z,1516681614.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:26:54.824Z,1516681614.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:55.232Z,1516681615.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:26:55.233Z,1516681615.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:55.652Z,1516681615.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:26:55.653Z,1516681615.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:56.034Z,1516681616.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:26:56.035Z,1516681616.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:56.426Z,1516681616.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:26:56.427Z,1516681616.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:56.825Z,1516681616.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:26:56.826Z,1516681616.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:57.233Z,1516681617.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:26:57.234Z,1516681617.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:57.637Z,1516681617.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:58.034Z,1516681618.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:58.429Z,1516681618.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:58.829Z,1516681618.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:59.234Z,1516681619.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:26:59.633Z,1516681619.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:00.033Z,1516681620.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:00.424Z,1516681620.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:00.823Z,1516681620.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:01.233Z,1516681621.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:01.636Z,1516681621.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:02.037Z,1516681622.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:02.424Z,1516681622.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:02.823Z,1516681622.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:03.237Z,1516681623.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:03.641Z,1516681623.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:04.034Z,1516681624.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:04.426Z,1516681624.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:04.837Z,1516681624.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:05.234Z,1516681625.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:05.638Z,1516681625.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:06.033Z,1516681626.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:06.425Z,1516681626.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:06.827Z,1516681626.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:07.233Z,1516681627.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:07.641Z,1516681627.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:08.041Z,1516681628.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:08.428Z,1516681628.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:08.828Z,1516681628.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:09.245Z,1516681629.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:09.641Z,1516681629.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:10.034Z,1516681630.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:10.428Z,1516681630.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:10.833Z,1516681630.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:11.234Z,1516681631.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:11.637Z,1516681631.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:12.033Z,1516681632.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:12.425Z,1516681632.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:12.828Z,1516681632.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:13.241Z,1516681633.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:16.338Z,1516681636.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:16.497Z,1516681636.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:16.827Z,1516681636.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:17.224Z,1516681637.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:17.621Z,1516681637.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:18.021Z,1516681638.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:18.421Z,1516681638.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:18.818Z,1516681638.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:19.232Z,1516681639.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:19.599Z,1516681639.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:20.005Z,1516681640.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:20.404Z,1516681640.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:20.811Z,1516681640.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:21.201Z,1516681641.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:21.610Z,1516681641.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:22.009Z,1516681642.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:22.406Z,1516681642.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:22.804Z,1516681642.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:23.205Z,1516681643.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:23.605Z,1516681643.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:24.008Z,1516681644.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:24.406Z,1516681644.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:24.806Z,1516681644.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:25.206Z,1516681645.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:25.608Z,1516681645.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:25.000Z,1516681646.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:26.408Z,1516681646.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:26.808Z,1516681646.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:27.201Z,1516681647.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:27.606Z,1516681647.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:28.009Z,1516681648.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:28.406Z,1516681648.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:28.802Z,1516681648.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:29.208Z,1516681649.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:29.613Z,1516681649.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:30.012Z,1516681650.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:30.409Z,1516681650.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:30.813Z,1516681650.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:31.210Z,1516681651.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:31.604Z,1516681651.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:32.008Z,1516681652.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:32.413Z,1516681652.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:32.808Z,1516681652.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:33.203Z,1516681653.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:33.613Z,1516681653.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:34.009Z,1516681654.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:34.417Z,1516681654.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:34.804Z,1516681654.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:35.204Z,1516681655.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:35.613Z,1516681655.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:36.008Z,1516681656.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:36.422Z,1516681656.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:36.813Z,1516681656.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:37.214Z,1516681657.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:37.607Z,1516681657.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:38.007Z,1516681658.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:38.403Z,1516681658.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:38.803Z,1516681658.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:39.202Z,1516681659.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:39.613Z,1516681659.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:40.009Z,1516681660.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:40.413Z,1516681660.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:40.803Z,1516681660.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:41.203Z,1516681661.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:41.605Z,1516681661.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:42.003Z,1516681662.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:42.422Z,1516681662.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:42.809Z,1516681662.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:43.213Z,1516681663.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:43.607Z,1516681663.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:44.007Z,1516681664.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:44.403Z,1516681664.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:44.804Z,1516681664.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:45.202Z,1516681665.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:45.613Z,1516681665.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:46.008Z,1516681666.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:46.413Z,1516681666.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:46.807Z,1516681666.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:47.204Z,1516681667.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:47.606Z,1516681667.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:48.002Z,1516681668.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:48.416Z,1516681668.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:48.809Z,1516681668.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:49.213Z,1516681669.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:49.604Z,1516681669.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:50.008Z,1516681670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:50.407Z,1516681670.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:50.812Z,1516681670.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:51.204Z,1516681671.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:51.618Z,1516681671.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:52.013Z,1516681672.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:52.414Z,1516681672.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:52.809Z,1516681672.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:53.208Z,1516681673.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:53.608Z,1516681673.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:54.011Z,1516681674.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:54.420Z,1516681674.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:54.817Z,1516681674.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:55.225Z,1516681675.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:55.608Z,1516681675.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:56.014Z,1516681676.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:56.412Z,1516681676.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:56.805Z,1516681676.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:57.210Z,1516681677.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:57.615Z,1516681677.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:58.019Z,1516681678.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:58.423Z,1516681678.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:58.812Z,1516681678.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:59.213Z,1516681679.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:27:59.610Z,1516681679.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:00.016Z,1516681680.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:00.416Z,1516681680.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:00.817Z,1516681680.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:01.220Z,1516681681.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:01.609Z,1516681681.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:02.013Z,1516681682.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:02.413Z,1516681682.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:02.819Z,1516681682.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:03.193Z,1516681683.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:03.617Z,1516681683.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:04.029Z,1516681684.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:04.424Z,1516681684.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:04.819Z,1516681684.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:05.224Z,1516681685.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:05.616Z,1516681685.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:06.001Z,1516681686.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:06.427Z,1516681686.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:06.826Z,1516681686.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:07.232Z,1516681687.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:07.607Z,1516681687.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:08.003Z,1516681688.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:08.403Z,1516681688.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:08.812Z,1516681688.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:09.201Z,1516681689.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:09.634Z,1516681689.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:10.013Z,1516681690.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:10.406Z,1516681690.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:10.809Z,1516681690.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:11.213Z,1516681691.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:11.603Z,1516681691.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:12.005Z,1516681692.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:12.407Z,1516681692.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:12.807Z,1516681692.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:13.207Z,1516681693.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:13.604Z,1516681693.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:16.700Z,1516681696.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:16.837Z,1516681696.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:17.190Z,1516681697.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:17.602Z,1516681697.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:18.001Z,1516681698.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:18.387Z,1516681698.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:18.803Z,1516681698.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:19.173Z,1516681699.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:19.609Z,1516681699.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:20.008Z,1516681700.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:20.405Z,1516681700.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:20.781Z,1516681700.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:21.183Z,1516681701.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:21.581Z,1516681701.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:21.980Z,1516681701.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:22.414Z,1516681702.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:22.790Z,1516681702.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:23.194Z,1516681703.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:23.583Z,1516681703.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:23.985Z,1516681703.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:24.385Z,1516681704.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:24.792Z,1516681704.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:25.189Z,1516681705.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:25.598Z,1516681705.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:25.998Z,1516681705.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:26.405Z,1516681706.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:26.789Z,1516681706.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:27.190Z,1516681707.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:27.591Z,1516681707.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:28.001Z,1516681708.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:28.397Z,1516681708.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:28.797Z,1516681708.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:29.201Z,1516681709.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:29.591Z,1516681709.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:30.001Z,1516681710.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:30.391Z,1516681710.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:30.796Z,1516681710.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:31.193Z,1516681711.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:31.613Z,1516681711.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:32.007Z,1516681712.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:32.400Z,1516681712.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:32.796Z,1516681712.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:33.197Z,1516681713.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:33.590Z,1516681713.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:33.993Z,1516681713.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:34.402Z,1516681714.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:34.801Z,1516681714.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:35.196Z,1516681715.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:35.600Z,1516681715.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:35.995Z,1516681715.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:36.406Z,1516681716.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:36.806Z,1516681716.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:37.204Z,1516681717.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:37.590Z,1516681717.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:38.004Z,1516681718.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:38.396Z,1516681718.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:38.810Z,1516681718.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:39.198Z,1516681719.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:39.578Z,1516681719.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:40.004Z,1516681720.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:40.406Z,1516681720.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:40.807Z,1516681720.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:41.212Z,1516681721.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:41.612Z,1516681721.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:41.983Z,1516681721.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:42.410Z,1516681722.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:42.809Z,1516681722.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:43.209Z,1516681723.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:43.585Z,1516681723.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:43.982Z,1516681723.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:44.394Z,1516681724.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:44.818Z,1516681724.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:45.217Z,1516681725.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:45.593Z,1516681725.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:45.986Z,1516681725.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:46.390Z,1516681726.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:46.790Z,1516681726.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:47.219Z,1516681727.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:47.594Z,1516681727.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:47.997Z,1516681727.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:48.394Z,1516681728.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:48.795Z,1516681728.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:49.197Z,1516681729.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:49.597Z,1516681729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:50.000Z,1516681730.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:50.397Z,1516681730.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:50.805Z,1516681730.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:51.208Z,1516681731.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:51.589Z,1516681731.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:52.008Z,1516681732.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:52.394Z,1516681732.394 [PNI_TCM](ERROR): CRC does not match. Expected:0x14833 got:0x49716 2018-01-23T04:28:52.428Z,1516681732.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:52.801Z,1516681732.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:53.197Z,1516681733.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:53.591Z,1516681733.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:53.997Z,1516681733.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:54.396Z,1516681734.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:54.803Z,1516681734.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:55.199Z,1516681735.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:55.604Z,1516681735.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:55.971Z,1516681735.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x29367 got:0x17951 2018-01-23T04:28:56.006Z,1516681736.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:56.401Z,1516681736.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:56.802Z,1516681736.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:57.201Z,1516681737.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:57.579Z,1516681737.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:57.982Z,1516681737.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:58.409Z,1516681738.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:58.809Z,1516681738.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:59.211Z,1516681739.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:28:59.593Z,1516681739.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:00.015Z,1516681740.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:00.397Z,1516681740.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:00.792Z,1516681740.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:01.191Z,1516681741.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:01.614Z,1516681741.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:01.988Z,1516681741.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:02.391Z,1516681742.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:02.797Z,1516681742.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:03.214Z,1516681743.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:03.597Z,1516681743.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:03.991Z,1516681743.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:04.401Z,1516681744.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:04.817Z,1516681744.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:05.198Z,1516681745.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:05.595Z,1516681745.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:05.997Z,1516681745.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:06.417Z,1516681746.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:06.798Z,1516681746.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:07.196Z,1516681747.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:07.591Z,1516681747.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:08.020Z,1516681748.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:08.388Z,1516681748.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:08.798Z,1516681748.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:09.201Z,1516681749.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:09.617Z,1516681749.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:09.997Z,1516681749.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:10.393Z,1516681750.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:10.792Z,1516681750.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:11.189Z,1516681751.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:11.601Z,1516681751.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:12.002Z,1516681752.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:12.397Z,1516681752.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:12.797Z,1516681752.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:13.185Z,1516681753.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:13.590Z,1516681753.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:13.993Z,1516681753.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:17.080Z,1516681757.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:17.229Z,1516681757.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:17.584Z,1516681757.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:17.960Z,1516681757.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:18.352Z,1516681758.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:18.756Z,1516681758.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:19.152Z,1516681759.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:19.557Z,1516681759.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:19.956Z,1516681759.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:20.357Z,1516681760.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:20.749Z,1516681760.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:21.150Z,1516681761.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:21.556Z,1516681761.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:21.953Z,1516681761.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:22.358Z,1516681762.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:22.758Z,1516681762.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:23.161Z,1516681763.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:23.569Z,1516681763.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:23.953Z,1516681763.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:24.348Z,1516681764.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:24.762Z,1516681764.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:25.151Z,1516681765.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:25.558Z,1516681765.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:25.961Z,1516681765.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:26.363Z,1516681766.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:26.754Z,1516681766.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:27.156Z,1516681767.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:27.556Z,1516681767.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:27.955Z,1516681767.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:28.355Z,1516681768.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:28.759Z,1516681768.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:29.161Z,1516681769.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:29.558Z,1516681769.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:29.957Z,1516681769.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:30.357Z,1516681770.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:30.753Z,1516681770.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:31.157Z,1516681771.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:31.559Z,1516681771.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:31.961Z,1516681771.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:32.369Z,1516681772.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:32.753Z,1516681772.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:33.153Z,1516681773.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:33.551Z,1516681773.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:33.955Z,1516681773.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:34.355Z,1516681774.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:34.759Z,1516681774.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:35.163Z,1516681775.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:35.573Z,1516681775.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:35.951Z,1516681775.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:36.355Z,1516681776.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:36.749Z,1516681776.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:37.157Z,1516681777.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:37.559Z,1516681777.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:37.966Z,1516681777.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:38.363Z,1516681778.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:38.363Z,1516681778.363 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-01-23T04:29:38.363Z,1516681778.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:29:38.365Z,1516681778.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:38.365Z,1516681778.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-01-23T04:29:38.365Z,1516681778.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:29:38.367Z,1516681778.367 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:38.367Z,1516681778.367 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25 2018-01-23T04:29:38.367Z,1516681778.367 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:29:38.379Z,1516681778.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:29:38.379Z,1516681778.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:29:38.380Z,1516681778.380 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:29:38.770Z,1516681778.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:29:38.770Z,1516681778.770 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-01-23T04:29:38.770Z,1516681778.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:29:38.770Z,1516681778.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-01-23T04:29:38.771Z,1516681778.771 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:29:38.771Z,1516681778.771 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25 2018-01-23T04:29:39.159Z,1516681779.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:29:39.159Z,1516681779.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:29:39.160Z,1516681779.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:29:39.160Z,1516681779.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:29:39.160Z,1516681779.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:29:39.161Z,1516681779.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:29:39.161Z,1516681779.161 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:29:39.161Z,1516681779.161 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:29:39.162Z,1516681779.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:29:39.564Z,1516681779.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:29:39.565Z,1516681779.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:39.943Z,1516681779.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:29:39.944Z,1516681779.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:40.368Z,1516681780.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:29:40.369Z,1516681780.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:40.774Z,1516681780.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:29:40.779Z,1516681780.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:41.157Z,1516681781.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:29:41.158Z,1516681781.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:41.561Z,1516681781.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:29:41.562Z,1516681781.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:41.949Z,1516681781.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:29:41.950Z,1516681781.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:42.352Z,1516681782.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:29:42.353Z,1516681782.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:42.756Z,1516681782.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:29:42.757Z,1516681782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:43.152Z,1516681783.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:29:43.153Z,1516681783.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:43.558Z,1516681783.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:29:43.559Z,1516681783.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:43.962Z,1516681783.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:29:43.963Z,1516681783.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:44.364Z,1516681784.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:29:44.365Z,1516681784.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:44.749Z,1516681784.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:29:44.750Z,1516681784.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:45.161Z,1516681785.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:29:45.162Z,1516681785.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:45.548Z,1516681785.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:29:45.549Z,1516681785.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:45.958Z,1516681785.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:29:45.959Z,1516681785.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:46.349Z,1516681786.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:29:46.350Z,1516681786.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:46.758Z,1516681786.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:29:46.759Z,1516681786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:47.168Z,1516681787.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:29:47.169Z,1516681787.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:47.558Z,1516681787.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:29:47.559Z,1516681787.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:47.956Z,1516681787.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:29:47.957Z,1516681787.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:48.350Z,1516681788.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:29:48.351Z,1516681788.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:48.756Z,1516681788.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:29:48.757Z,1516681788.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:49.154Z,1516681789.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:29:49.155Z,1516681789.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:49.562Z,1516681789.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:29:49.563Z,1516681789.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:49.963Z,1516681789.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:29:49.964Z,1516681789.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:50.359Z,1516681790.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:29:50.360Z,1516681790.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:50.756Z,1516681790.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:29:50.757Z,1516681790.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:51.162Z,1516681791.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:29:51.164Z,1516681791.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:51.568Z,1516681791.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:29:51.569Z,1516681791.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:51.963Z,1516681791.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:29:51.964Z,1516681791.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:52.366Z,1516681792.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:29:52.367Z,1516681792.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:52.771Z,1516681792.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:29:52.772Z,1516681792.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:53.172Z,1516681793.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:29:53.173Z,1516681793.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:53.565Z,1516681793.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:29:53.566Z,1516681793.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:53.946Z,1516681793.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:29:53.947Z,1516681793.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:54.344Z,1516681794.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:29:54.345Z,1516681794.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:54.751Z,1516681794.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:29:54.752Z,1516681794.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:55.143Z,1516681795.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:29:55.144Z,1516681795.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:55.554Z,1516681795.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:29:55.555Z,1516681795.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:55.961Z,1516681795.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:29:55.962Z,1516681795.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:56.353Z,1516681796.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:29:56.354Z,1516681796.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:56.751Z,1516681796.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:29:56.752Z,1516681796.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:57.146Z,1516681797.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:29:57.147Z,1516681797.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:57.547Z,1516681797.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:29:57.548Z,1516681797.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:57.948Z,1516681797.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:29:57.949Z,1516681797.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:58.347Z,1516681798.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:29:58.348Z,1516681798.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:58.753Z,1516681798.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:59.158Z,1516681799.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:59.554Z,1516681799.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:29:59.948Z,1516681799.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:00.347Z,1516681800.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:00.756Z,1516681800.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:01.156Z,1516681801.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:01.565Z,1516681801.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:01.979Z,1516681801.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:02.357Z,1516681802.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:02.742Z,1516681802.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:03.152Z,1516681803.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:03.548Z,1516681803.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:03.950Z,1516681803.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:04.349Z,1516681804.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:04.750Z,1516681804.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:05.155Z,1516681805.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:05.577Z,1516681805.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:05.946Z,1516681805.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:06.353Z,1516681806.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:06.746Z,1516681806.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:07.146Z,1516681807.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:07.550Z,1516681807.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:07.954Z,1516681807.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:08.381Z,1516681808.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:08.753Z,1516681808.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:09.148Z,1516681809.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:09.547Z,1516681809.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:09.948Z,1516681809.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:10.356Z,1516681810.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:10.780Z,1516681810.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:11.179Z,1516681811.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:11.550Z,1516681811.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:11.948Z,1516681811.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:12.352Z,1516681812.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:12.749Z,1516681812.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:12.752Z,1516681812.752 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T04:30:12.752Z,1516681812.752 [Default:CheckIn:C.Wait] Stopped 2018-01-23T04:30:12.752Z,1516681812.752 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T04:30:12.752Z,1516681812.752 [Default:CheckIn:D] Running Loop=1 2018-01-23T04:30:13.152Z,1516681813.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:13.155Z,1516681813.155 [Default:CheckIn:D] Stopped 2018-01-23T04:30:13.156Z,1516681813.156 [Default:CheckIn:E] Running Loop=1 2018-01-23T04:30:13.562Z,1516681813.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:13.581Z,1516681813.581 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.351595 min 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn:E] Stopped 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn] Stopped 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn](INFO): Running loop #8 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn] Running Loop=8 2018-01-23T04:30:13.582Z,1516681813.582 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T04:30:13.587Z,1516681813.587 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T04:30:13.954Z,1516681813.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:14.354Z,1516681814.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:17.448Z,1516681817.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:17.581Z,1516681817.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:17.936Z,1516681817.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:18.342Z,1516681818.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:18.741Z,1516681818.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:19.137Z,1516681819.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:19.562Z,1516681819.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:19.925Z,1516681819.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:20.336Z,1516681820.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:20.730Z,1516681820.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:21.142Z,1516681821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:21.543Z,1516681821.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:21.916Z,1516681821.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:22.329Z,1516681822.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:22.717Z,1516681822.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:23.117Z,1516681823.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:23.533Z,1516681823.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:23.941Z,1516681823.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:24.361Z,1516681824.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:24.732Z,1516681824.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:25.127Z,1516681825.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:25.545Z,1516681825.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:25.947Z,1516681825.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:26.361Z,1516681826.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:26.747Z,1516681826.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:27.169Z,1516681827.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:27.581Z,1516681827.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:27.977Z,1516681827.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:28.338Z,1516681828.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:28.745Z,1516681828.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:29.114Z,1516681829.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:29.532Z,1516681829.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:29.934Z,1516681829.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:30.317Z,1516681830.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:30.742Z,1516681830.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:31.113Z,1516681831.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:31.512Z,1516681831.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:31.926Z,1516681831.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:32.329Z,1516681832.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:32.729Z,1516681832.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:33.115Z,1516681833.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:33.512Z,1516681833.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:33.913Z,1516681833.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:34.312Z,1516681834.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:34.717Z,1516681834.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:35.117Z,1516681835.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:35.517Z,1516681835.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:35.917Z,1516681835.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:36.313Z,1516681836.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:36.713Z,1516681836.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:37.113Z,1516681837.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:37.513Z,1516681837.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:37.928Z,1516681837.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:38.333Z,1516681838.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:38.732Z,1516681838.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:39.113Z,1516681839.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:39.514Z,1516681839.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:39.917Z,1516681839.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:40.317Z,1516681840.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:40.729Z,1516681840.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:41.125Z,1516681841.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:41.533Z,1516681841.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:41.917Z,1516681841.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:42.317Z,1516681842.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:42.720Z,1516681842.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:43.114Z,1516681843.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:43.512Z,1516681843.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:43.929Z,1516681843.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:44.325Z,1516681844.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:44.722Z,1516681844.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:45.115Z,1516681845.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:45.514Z,1516681845.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:45.917Z,1516681845.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:46.317Z,1516681846.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:46.676Z,1516681846.676 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T04:30:46.676Z,1516681846.676 [NAL9602] Data Fault, FailCount= 2 2018-01-23T04:30:46.676Z,1516681846.676 [NAL9602](ERROR): Data Fault 2018-01-23T04:30:46.737Z,1516681846.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:46.762Z,1516681846.762 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T04:30:47.076Z,1516681847.076 [NAL9602](INFO): Powering down 2018-01-23T04:30:47.129Z,1516681847.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:47.523Z,1516681847.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:47.923Z,1516681847.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:47.936Z,1516681847.936 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T04:30:47.936Z,1516681847.936 [NAL9602] No Fault, FailCount= 2 2018-01-23T04:30:48.302Z,1516681848.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:48.724Z,1516681848.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:49.176Z,1516681849.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:49.525Z,1516681849.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:49.924Z,1516681849.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:50.323Z,1516681850.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:50.702Z,1516681850.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:51.102Z,1516681851.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:51.529Z,1516681851.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:51.951Z,1516681851.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:52.337Z,1516681852.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:52.733Z,1516681852.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:53.112Z,1516681853.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:53.533Z,1516681853.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:53.910Z,1516681853.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:54.311Z,1516681854.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:54.713Z,1516681854.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:55.137Z,1516681855.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:55.513Z,1516681855.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:55.912Z,1516681855.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:56.312Z,1516681856.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:56.720Z,1516681856.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:57.109Z,1516681857.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:57.509Z,1516681857.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:57.920Z,1516681857.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:58.306Z,1516681858.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:58.710Z,1516681858.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:59.118Z,1516681859.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:59.507Z,1516681859.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:30:59.910Z,1516681859.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:00.309Z,1516681860.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:00.708Z,1516681860.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:01.109Z,1516681861.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:01.514Z,1516681861.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:01.912Z,1516681861.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:02.314Z,1516681862.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:02.711Z,1516681862.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:03.111Z,1516681863.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:03.517Z,1516681863.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:03.915Z,1516681863.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:04.308Z,1516681864.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:04.711Z,1516681864.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:05.110Z,1516681865.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:05.508Z,1516681865.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:05.920Z,1516681865.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:06.314Z,1516681866.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:06.710Z,1516681866.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:07.113Z,1516681867.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:07.510Z,1516681867.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:07.910Z,1516681867.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:08.313Z,1516681868.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:08.710Z,1516681868.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:09.110Z,1516681869.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:09.513Z,1516681869.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:09.910Z,1516681869.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:10.312Z,1516681870.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:10.713Z,1516681870.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:11.119Z,1516681871.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:11.511Z,1516681871.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:11.923Z,1516681871.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:12.311Z,1516681872.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:12.712Z,1516681872.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:13.125Z,1516681873.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:13.517Z,1516681873.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:13.920Z,1516681873.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:14.323Z,1516681874.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:14.724Z,1516681874.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:17.779Z,1516681877.779 [NAL9602](INFO): Powering up NAL9602 2018-01-23T04:31:17.826Z,1516681877.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:17.972Z,1516681877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:18.295Z,1516681878.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:18.689Z,1516681878.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:19.092Z,1516681879.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:19.495Z,1516681879.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:19.891Z,1516681879.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:20.292Z,1516681880.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:20.701Z,1516681880.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:21.091Z,1516681881.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:21.490Z,1516681881.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:21.890Z,1516681881.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:22.287Z,1516681882.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:22.701Z,1516681882.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:23.090Z,1516681883.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:23.490Z,1516681883.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:23.891Z,1516681883.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:24.293Z,1516681884.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:24.694Z,1516681884.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:25.095Z,1516681885.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:25.492Z,1516681885.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:25.896Z,1516681885.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:26.295Z,1516681886.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:26.701Z,1516681886.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:27.090Z,1516681887.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:27.491Z,1516681887.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:27.892Z,1516681887.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:28.300Z,1516681888.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:28.656Z,1516681888.656 [NAL9602](INFO): NAL9602 initialized 2018-01-23T04:31:28.700Z,1516681888.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:29.093Z,1516681889.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:29.505Z,1516681889.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:29.909Z,1516681889.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:30.309Z,1516681890.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:30.701Z,1516681890.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:31.101Z,1516681891.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:31.494Z,1516681891.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:31.900Z,1516681891.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:32.301Z,1516681892.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:32.702Z,1516681892.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:33.106Z,1516681893.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:33.502Z,1516681893.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:33.893Z,1516681893.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:34.304Z,1516681894.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:34.695Z,1516681894.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:35.094Z,1516681895.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:35.503Z,1516681895.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:35.913Z,1516681895.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:36.313Z,1516681896.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:36.698Z,1516681896.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:37.096Z,1516681897.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:37.501Z,1516681897.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:37.905Z,1516681897.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:38.302Z,1516681898.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:38.695Z,1516681898.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:39.101Z,1516681899.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:39.502Z,1516681899.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:39.911Z,1516681899.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:40.310Z,1516681900.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:40.700Z,1516681900.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:41.102Z,1516681901.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:41.503Z,1516681901.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:41.909Z,1516681901.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:42.313Z,1516681902.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:42.702Z,1516681902.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:43.097Z,1516681903.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:43.513Z,1516681903.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:43.912Z,1516681903.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:44.302Z,1516681904.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:44.693Z,1516681904.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:45.100Z,1516681905.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:45.502Z,1516681905.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:45.905Z,1516681905.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:46.308Z,1516681906.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:46.698Z,1516681906.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:47.099Z,1516681907.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:47.502Z,1516681907.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:47.905Z,1516681907.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:48.313Z,1516681908.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:48.701Z,1516681908.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:49.101Z,1516681909.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:49.502Z,1516681909.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:49.909Z,1516681909.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:50.314Z,1516681910.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:50.696Z,1516681910.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:51.103Z,1516681911.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:51.505Z,1516681911.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:51.910Z,1516681911.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:52.310Z,1516681912.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:52.697Z,1516681912.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:53.097Z,1516681913.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:53.507Z,1516681913.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:53.909Z,1516681913.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:54.313Z,1516681914.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:54.701Z,1516681914.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:55.105Z,1516681915.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:55.513Z,1516681915.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:55.916Z,1516681915.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:56.303Z,1516681916.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:56.700Z,1516681916.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:57.099Z,1516681917.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:57.502Z,1516681917.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:57.906Z,1516681917.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:58.312Z,1516681918.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:58.697Z,1516681918.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:59.100Z,1516681919.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:59.506Z,1516681919.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:31:59.906Z,1516681919.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:00.317Z,1516681920.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:00.696Z,1516681920.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:01.097Z,1516681921.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:01.513Z,1516681921.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:01.916Z,1516681921.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:02.301Z,1516681922.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:02.709Z,1516681922.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:03.095Z,1516681923.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:03.503Z,1516681923.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:03.910Z,1516681923.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:04.305Z,1516681924.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:04.694Z,1516681924.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:05.103Z,1516681925.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:05.507Z,1516681925.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:05.912Z,1516681925.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:06.303Z,1516681926.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:06.708Z,1516681926.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:07.105Z,1516681927.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:07.505Z,1516681927.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:07.910Z,1516681927.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:08.301Z,1516681928.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:08.700Z,1516681928.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:09.101Z,1516681929.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:09.496Z,1516681929.496 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T04:32:09.513Z,1516681929.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:09.906Z,1516681929.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:10.315Z,1516681930.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:10.694Z,1516681930.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:11.101Z,1516681931.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:11.504Z,1516681931.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:11.911Z,1516681931.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:12.317Z,1516681932.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:12.716Z,1516681932.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:13.102Z,1516681933.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:13.498Z,1516681933.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:13.906Z,1516681933.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:14.285Z,1516681934.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:14.713Z,1516681934.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:15.118Z,1516681935.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:18.213Z,1516681938.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:18.318Z,1516681938.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:18.713Z,1516681938.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:19.088Z,1516681939.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:19.486Z,1516681939.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:19.897Z,1516681939.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:20.315Z,1516681940.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:20.701Z,1516681940.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:21.089Z,1516681941.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:21.497Z,1516681941.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:21.907Z,1516681941.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:22.288Z,1516681942.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:22.694Z,1516681942.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:23.105Z,1516681943.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:23.521Z,1516681943.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:23.889Z,1516681943.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:24.291Z,1516681944.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:24.695Z,1516681944.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:25.093Z,1516681945.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:25.489Z,1516681945.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:25.905Z,1516681945.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:26.296Z,1516681946.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:26.712Z,1516681946.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:27.087Z,1516681947.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:27.492Z,1516681947.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:27.886Z,1516681947.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:28.288Z,1516681948.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:28.691Z,1516681948.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:29.098Z,1516681949.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:29.494Z,1516681949.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:29.883Z,1516681949.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:30.281Z,1516681950.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:30.682Z,1516681950.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:31.090Z,1516681951.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:31.485Z,1516681951.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:31.895Z,1516681951.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:32.306Z,1516681952.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:32.708Z,1516681952.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:33.086Z,1516681953.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:33.489Z,1516681953.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:33.892Z,1516681953.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:34.296Z,1516681954.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:34.692Z,1516681954.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:35.097Z,1516681955.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:35.502Z,1516681955.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:35.891Z,1516681955.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:36.269Z,1516681956.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:36.671Z,1516681956.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:37.076Z,1516681957.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:37.472Z,1516681957.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:37.902Z,1516681957.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:38.307Z,1516681958.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:38.686Z,1516681958.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:39.085Z,1516681959.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:39.479Z,1516681959.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:39.479Z,1516681959.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-01-23T04:32:39.479Z,1516681959.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:32:39.481Z,1516681959.481 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:39.481Z,1516681959.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-01-23T04:32:39.481Z,1516681959.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:32:39.483Z,1516681959.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:39.483Z,1516681959.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26 2018-01-23T04:32:39.483Z,1516681959.483 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:32:39.511Z,1516681959.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:32:39.511Z,1516681959.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:32:39.511Z,1516681959.511 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:32:39.898Z,1516681959.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:32:39.907Z,1516681959.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-01-23T04:32:39.907Z,1516681959.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:32:39.907Z,1516681959.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-01-23T04:32:39.908Z,1516681959.908 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:32:39.908Z,1516681959.908 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26 2018-01-23T04:32:40.279Z,1516681960.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:32:40.280Z,1516681960.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:32:40.280Z,1516681960.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:32:40.280Z,1516681960.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:32:40.281Z,1516681960.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:32:40.281Z,1516681960.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:32:40.281Z,1516681960.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:32:40.282Z,1516681960.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:32:40.282Z,1516681960.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:32:40.704Z,1516681960.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:32:40.705Z,1516681960.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:41.093Z,1516681961.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:32:41.094Z,1516681961.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:41.497Z,1516681961.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:32:41.498Z,1516681961.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:41.882Z,1516681961.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:32:41.883Z,1516681961.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:42.280Z,1516681962.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:32:42.281Z,1516681962.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:42.687Z,1516681962.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:32:42.688Z,1516681962.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:43.091Z,1516681963.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:32:43.092Z,1516681963.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:43.488Z,1516681963.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:32:43.488Z,1516681963.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:43.891Z,1516681963.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:32:43.892Z,1516681963.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:44.293Z,1516681964.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:32:44.294Z,1516681964.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:44.699Z,1516681964.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:32:44.700Z,1516681964.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:45.080Z,1516681965.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:32:45.081Z,1516681965.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:45.488Z,1516681965.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:32:45.489Z,1516681965.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:45.884Z,1516681965.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:32:45.885Z,1516681965.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:46.284Z,1516681966.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:32:46.285Z,1516681966.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:46.693Z,1516681966.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:32:46.694Z,1516681966.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:47.095Z,1516681967.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:32:47.096Z,1516681967.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:47.499Z,1516681967.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:32:47.500Z,1516681967.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:47.872Z,1516681967.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:32:47.873Z,1516681967.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:48.271Z,1516681968.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:32:48.272Z,1516681968.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:48.671Z,1516681968.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:32:48.672Z,1516681968.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:49.076Z,1516681969.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:32:49.077Z,1516681969.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:49.472Z,1516681969.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:32:49.473Z,1516681969.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:49.903Z,1516681969.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:32:49.904Z,1516681969.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:50.307Z,1516681970.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:32:50.308Z,1516681970.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:50.686Z,1516681970.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:32:50.698Z,1516681970.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:51.080Z,1516681971.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:32:51.081Z,1516681971.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:51.487Z,1516681971.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:32:51.488Z,1516681971.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:51.882Z,1516681971.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:32:51.883Z,1516681971.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:52.285Z,1516681972.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:32:52.286Z,1516681972.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:52.787Z,1516681972.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T04:32:52.788Z,1516681972.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:53.110Z,1516681973.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:32:53.111Z,1516681973.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:53.498Z,1516681973.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:32:53.516Z,1516681973.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:53.880Z,1516681973.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:32:53.881Z,1516681973.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:54.281Z,1516681974.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:32:54.282Z,1516681974.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:54.683Z,1516681974.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:32:54.684Z,1516681974.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:55.088Z,1516681975.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:32:55.089Z,1516681975.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:55.487Z,1516681975.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:32:55.488Z,1516681975.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:55.889Z,1516681975.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:32:55.889Z,1516681975.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:56.304Z,1516681976.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:32:56.305Z,1516681976.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:56.701Z,1516681976.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:32:56.702Z,1516681976.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:57.084Z,1516681977.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:32:57.085Z,1516681977.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:57.488Z,1516681977.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:32:57.489Z,1516681977.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:57.885Z,1516681977.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:32:57.886Z,1516681977.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:58.287Z,1516681978.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:32:58.288Z,1516681978.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:58.704Z,1516681978.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:32:58.705Z,1516681978.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:59.097Z,1516681979.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:32:59.098Z,1516681979.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:59.494Z,1516681979.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:32:59.889Z,1516681979.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:00.277Z,1516681980.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:00.691Z,1516681980.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:01.092Z,1516681981.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:01.469Z,1516681981.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:01.893Z,1516681981.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:02.296Z,1516681982.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:02.699Z,1516681982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:03.097Z,1516681983.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:03.471Z,1516681983.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:03.895Z,1516681983.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:04.297Z,1516681984.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:04.704Z,1516681984.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:05.100Z,1516681985.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:05.500Z,1516681985.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:05.877Z,1516681985.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:06.283Z,1516681986.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:06.680Z,1516681986.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:07.089Z,1516681987.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:07.478Z,1516681987.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:07.889Z,1516681987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:08.285Z,1516681988.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:08.689Z,1516681988.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:09.081Z,1516681989.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:09.490Z,1516681989.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:09.883Z,1516681989.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:10.287Z,1516681990.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:10.700Z,1516681990.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:11.093Z,1516681991.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:11.490Z,1516681991.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:11.888Z,1516681991.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:12.288Z,1516681992.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:12.690Z,1516681992.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:13.092Z,1516681993.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:13.477Z,1516681993.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:13.901Z,1516681993.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:14.304Z,1516681994.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:14.692Z,1516681994.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:15.091Z,1516681995.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:15.493Z,1516681995.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:18.570Z,1516681998.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:18.700Z,1516681998.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:19.062Z,1516681999.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:19.495Z,1516681999.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:19.862Z,1516681999.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:20.260Z,1516682000.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:20.661Z,1516682000.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:21.061Z,1516682001.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:21.460Z,1516682001.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:21.862Z,1516682001.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:22.262Z,1516682002.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:22.662Z,1516682002.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:23.060Z,1516682003.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:23.459Z,1516682003.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:23.859Z,1516682003.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:24.259Z,1516682004.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:24.669Z,1516682004.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:25.073Z,1516682005.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:25.473Z,1516682005.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:25.866Z,1516682005.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:26.260Z,1516682006.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:26.672Z,1516682006.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:27.077Z,1516682007.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:27.477Z,1516682007.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:27.865Z,1516682007.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:28.260Z,1516682008.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:28.671Z,1516682008.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:29.076Z,1516682009.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:29.471Z,1516682009.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:29.873Z,1516682009.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:30.261Z,1516682010.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:30.674Z,1516682010.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:31.081Z,1516682011.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:31.471Z,1516682011.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:31.863Z,1516682011.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:32.263Z,1516682012.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:32.685Z,1516682012.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:33.081Z,1516682013.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:33.477Z,1516682013.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:33.863Z,1516682013.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:34.297Z,1516682014.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:34.680Z,1516682014.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:35.077Z,1516682015.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:35.471Z,1516682015.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:35.861Z,1516682015.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:36.271Z,1516682016.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:36.671Z,1516682016.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:37.073Z,1516682017.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:37.478Z,1516682017.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:37.867Z,1516682017.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:38.267Z,1516682018.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:38.670Z,1516682018.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:39.081Z,1516682019.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:39.481Z,1516682019.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:39.862Z,1516682019.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:40.269Z,1516682020.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:40.674Z,1516682020.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:41.083Z,1516682021.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:41.471Z,1516682021.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:41.867Z,1516682021.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:42.278Z,1516682022.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:42.670Z,1516682022.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:43.085Z,1516682023.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:43.474Z,1516682023.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:43.861Z,1516682023.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:44.268Z,1516682024.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:44.678Z,1516682024.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:45.078Z,1516682025.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:45.470Z,1516682025.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:45.876Z,1516682025.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:46.257Z,1516682026.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:46.677Z,1516682026.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:47.080Z,1516682027.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:47.480Z,1516682027.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:47.872Z,1516682027.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:48.280Z,1516682028.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:48.673Z,1516682028.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:49.077Z,1516682029.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:49.480Z,1516682029.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:49.872Z,1516682029.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:50.272Z,1516682030.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:50.677Z,1516682030.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:51.085Z,1516682031.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:51.479Z,1516682031.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:51.873Z,1516682031.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:52.271Z,1516682032.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:52.678Z,1516682032.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:53.077Z,1516682033.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:53.472Z,1516682033.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:53.852Z,1516682033.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:54.257Z,1516682034.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:54.678Z,1516682034.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:55.086Z,1516682035.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:55.466Z,1516682035.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:55.858Z,1516682035.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:56.265Z,1516682036.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:56.666Z,1516682036.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:57.066Z,1516682037.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:57.469Z,1516682037.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:57.873Z,1516682037.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:58.269Z,1516682038.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:58.673Z,1516682038.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:59.089Z,1516682039.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:59.481Z,1516682039.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:33:59.873Z,1516682039.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:00.256Z,1516682040.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:00.685Z,1516682040.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:01.086Z,1516682041.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:01.492Z,1516682041.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:01.866Z,1516682041.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:02.261Z,1516682042.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:02.662Z,1516682042.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:03.065Z,1516682043.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:03.461Z,1516682043.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:03.863Z,1516682043.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:04.290Z,1516682044.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:04.663Z,1516682044.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:05.061Z,1516682045.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:05.459Z,1516682045.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:05.859Z,1516682045.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:06.260Z,1516682046.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:06.659Z,1516682046.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:07.062Z,1516682047.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:07.465Z,1516682047.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:07.866Z,1516682047.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:08.265Z,1516682048.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:08.661Z,1516682048.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:09.059Z,1516682049.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:09.466Z,1516682049.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:09.865Z,1516682049.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:10.266Z,1516682050.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:10.669Z,1516682050.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:11.062Z,1516682051.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:11.461Z,1516682051.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:11.858Z,1516682051.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:12.260Z,1516682052.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:12.273Z,1516682052.273 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:34:12.674Z,1516682052.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:13.065Z,1516682053.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:13.464Z,1516682053.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:13.869Z,1516682053.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:14.259Z,1516682054.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:14.659Z,1516682054.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:15.069Z,1516682055.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:15.459Z,1516682055.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:15.872Z,1516682055.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:18.963Z,1516682058.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:19.117Z,1516682059.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:19.449Z,1516682059.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:19.852Z,1516682059.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:20.225Z,1516682060.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:20.653Z,1516682060.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:21.061Z,1516682061.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:21.430Z,1516682061.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:21.858Z,1516682061.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:22.236Z,1516682062.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:22.630Z,1516682062.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:23.041Z,1516682063.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:23.433Z,1516682063.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:23.838Z,1516682063.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:24.241Z,1516682064.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:24.645Z,1516682064.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:25.030Z,1516682065.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:25.440Z,1516682065.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:25.833Z,1516682065.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:26.236Z,1516682066.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:26.632Z,1516682066.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:27.045Z,1516682067.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:27.447Z,1516682067.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:27.841Z,1516682067.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:28.236Z,1516682068.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:28.630Z,1516682068.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:29.036Z,1516682069.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:29.433Z,1516682069.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:29.837Z,1516682069.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:30.242Z,1516682070.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:30.648Z,1516682070.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:31.041Z,1516682071.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:31.430Z,1516682071.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:31.841Z,1516682071.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:32.241Z,1516682072.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:32.635Z,1516682072.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:33.045Z,1516682073.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:33.445Z,1516682073.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:33.838Z,1516682073.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:34.237Z,1516682074.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:34.636Z,1516682074.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:35.035Z,1516682075.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:35.437Z,1516682075.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:35.839Z,1516682075.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:36.246Z,1516682076.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:36.659Z,1516682076.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:37.035Z,1516682077.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:37.435Z,1516682077.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:37.841Z,1516682077.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:38.232Z,1516682078.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:38.641Z,1516682078.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:39.046Z,1516682079.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:39.445Z,1516682079.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:39.842Z,1516682079.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:40.228Z,1516682080.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:40.626Z,1516682080.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:41.029Z,1516682081.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:41.430Z,1516682081.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:41.834Z,1516682081.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:42.258Z,1516682082.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:42.657Z,1516682082.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:43.033Z,1516682083.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:43.432Z,1516682083.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:43.828Z,1516682083.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:44.238Z,1516682084.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:44.628Z,1516682084.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:45.034Z,1516682085.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:45.441Z,1516682085.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:45.835Z,1516682085.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:46.228Z,1516682086.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:46.629Z,1516682086.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:47.029Z,1516682087.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:47.428Z,1516682087.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:47.833Z,1516682087.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:48.234Z,1516682088.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:48.633Z,1516682088.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:49.036Z,1516682089.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:49.429Z,1516682089.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:49.828Z,1516682089.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:50.230Z,1516682090.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:50.629Z,1516682090.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:51.038Z,1516682091.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:51.438Z,1516682091.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:51.837Z,1516682091.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:52.228Z,1516682092.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:52.629Z,1516682092.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:53.029Z,1516682093.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:53.428Z,1516682093.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:53.837Z,1516682093.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:54.241Z,1516682094.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:54.637Z,1516682094.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:55.037Z,1516682095.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:55.431Z,1516682095.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:55.832Z,1516682095.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:56.237Z,1516682096.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:56.637Z,1516682096.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:57.038Z,1516682097.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:57.438Z,1516682097.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:57.835Z,1516682097.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:58.228Z,1516682098.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:58.630Z,1516682098.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:59.030Z,1516682099.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:59.432Z,1516682099.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:34:59.839Z,1516682099.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:00.245Z,1516682100.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:00.638Z,1516682100.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:01.032Z,1516682101.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:01.430Z,1516682101.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:01.837Z,1516682101.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:02.231Z,1516682102.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:02.630Z,1516682102.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:03.038Z,1516682103.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:03.437Z,1516682103.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:03.838Z,1516682103.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:04.229Z,1516682104.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:04.628Z,1516682104.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:05.030Z,1516682105.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:05.428Z,1516682105.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:05.837Z,1516682105.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:06.241Z,1516682106.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:06.637Z,1516682106.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:07.030Z,1516682107.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:07.428Z,1516682107.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:07.837Z,1516682107.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:08.238Z,1516682108.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:08.637Z,1516682108.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:09.028Z,1516682109.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:09.432Z,1516682109.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:09.829Z,1516682109.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:10.229Z,1516682110.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:10.630Z,1516682110.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:11.037Z,1516682111.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:11.444Z,1516682111.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:11.849Z,1516682111.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:12.231Z,1516682112.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:12.637Z,1516682112.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:13.030Z,1516682113.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:13.437Z,1516682113.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:13.843Z,1516682113.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:13.846Z,1516682113.846 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T04:30:13.6Z 2018-01-23T04:35:13.846Z,1516682113.846 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:35:13.846Z,1516682113.846 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:35:14.249Z,1516682114.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:14.755Z,1516682114.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:15.034Z,1516682115.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:18.158Z,1516682118.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:18.237Z,1516682118.237 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0032.lzma 2018-01-23T04:35:18.284Z,1516682118.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:18.682Z,1516682118.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:19.013Z,1516682119.013 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0032.lzma.bak 2018-01-23T04:35:19.013Z,1516682119.013 [DataOverHttps](INFO): SBD MOMSN=7755001 2018-01-23T04:35:19.084Z,1516682119.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:19.803Z,1516682119.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:19.953Z,1516682119.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:24.937Z,1516682124.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:25.081Z,1516682125.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:25.470Z,1516682125.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:25.884Z,1516682125.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:26.275Z,1516682126.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:26.671Z,1516682126.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:33.036Z,1516682133.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:33.122Z,1516682133.122 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0033.lzma 2018-01-23T04:35:33.241Z,1516682133.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:33.588Z,1516682133.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:33.921Z,1516682133.921 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0033.lzma.bak 2018-01-23T04:35:33.921Z,1516682133.921 [DataOverHttps](INFO): SBD MOMSN=7755003 2018-01-23T04:35:34.004Z,1516682134.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:34.904Z,1516682134.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:34.936Z,1516682134.936 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:35:34.936Z,1516682134.936 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:35:34.936Z,1516682134.936 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:35:35.079Z,1516682135.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:38.130Z,1516682138.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:38.256Z,1516682138.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:38.648Z,1516682138.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:39.049Z,1516682139.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:39.424Z,1516682139.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:39.864Z,1516682139.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:40.221Z,1516682140.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:40.626Z,1516682140.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:40.626Z,1516682140.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-01-23T04:35:40.626Z,1516682140.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:35:40.628Z,1516682140.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:40.628Z,1516682140.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-01-23T04:35:40.628Z,1516682140.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:35:40.630Z,1516682140.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:40.630Z,1516682140.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27 2018-01-23T04:35:40.630Z,1516682140.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:35:40.654Z,1516682140.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:35:40.659Z,1516682140.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:35:40.659Z,1516682140.659 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:35:41.056Z,1516682141.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:35:41.056Z,1516682141.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-01-23T04:35:41.056Z,1516682141.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:35:41.056Z,1516682141.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-01-23T04:35:41.057Z,1516682141.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:35:41.057Z,1516682141.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27 2018-01-23T04:35:41.431Z,1516682141.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:35:41.432Z,1516682141.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:35:41.432Z,1516682141.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:35:41.433Z,1516682141.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:35:41.433Z,1516682141.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:35:41.433Z,1516682141.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:35:41.434Z,1516682141.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:35:41.434Z,1516682141.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:35:41.434Z,1516682141.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:35:41.840Z,1516682141.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:35:41.841Z,1516682141.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:42.225Z,1516682142.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:35:42.226Z,1516682142.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:42.627Z,1516682142.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:35:42.627Z,1516682142.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:43.022Z,1516682143.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:35:43.023Z,1516682143.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:43.424Z,1516682143.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:35:43.425Z,1516682143.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:43.829Z,1516682143.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:35:43.830Z,1516682143.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:44.225Z,1516682144.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x37061 got:0x3716 2018-01-23T04:35:44.260Z,1516682144.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:35:44.261Z,1516682144.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:44.643Z,1516682144.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:35:44.644Z,1516682144.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:45.036Z,1516682145.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:35:45.037Z,1516682145.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:45.436Z,1516682145.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:35:45.437Z,1516682145.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:45.828Z,1516682145.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:35:45.829Z,1516682145.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:46.232Z,1516682146.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:35:46.233Z,1516682146.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:46.625Z,1516682146.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:35:46.626Z,1516682146.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:47.033Z,1516682147.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:35:47.034Z,1516682147.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:47.428Z,1516682147.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:35:47.429Z,1516682147.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:47.828Z,1516682147.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:35:47.829Z,1516682147.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:48.224Z,1516682148.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:35:48.225Z,1516682148.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:48.632Z,1516682148.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:35:48.633Z,1516682148.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:49.024Z,1516682149.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:35:49.025Z,1516682149.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:49.421Z,1516682149.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:35:49.422Z,1516682149.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:49.822Z,1516682149.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:35:49.823Z,1516682149.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:50.245Z,1516682150.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:35:50.246Z,1516682150.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:50.628Z,1516682150.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:35:50.629Z,1516682150.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:51.032Z,1516682151.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:35:51.033Z,1516682151.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:51.426Z,1516682151.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:35:51.427Z,1516682151.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:51.836Z,1516682151.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:35:51.837Z,1516682151.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:52.224Z,1516682152.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:35:52.225Z,1516682152.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:52.622Z,1516682152.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:35:52.623Z,1516682152.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:53.027Z,1516682153.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:35:53.028Z,1516682153.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:53.449Z,1516682153.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:35:53.451Z,1516682153.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:53.829Z,1516682153.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:35:53.830Z,1516682153.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:54.223Z,1516682154.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:35:54.224Z,1516682154.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:54.624Z,1516682154.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:35:54.625Z,1516682154.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:55.053Z,1516682155.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:35:55.054Z,1516682155.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:55.440Z,1516682155.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:35:55.441Z,1516682155.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:55.830Z,1516682155.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:35:55.831Z,1516682155.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:56.234Z,1516682156.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:35:56.236Z,1516682156.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:56.653Z,1516682156.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:35:56.654Z,1516682156.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:57.034Z,1516682157.034 [PNI_TCM](ERROR): CRC does not match. Expected:0x56051 got:0x19975 2018-01-23T04:35:57.052Z,1516682157.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:35:57.053Z,1516682157.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:57.434Z,1516682157.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:35:57.435Z,1516682157.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:57.874Z,1516682157.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:35:57.875Z,1516682157.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:58.234Z,1516682158.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:35:58.235Z,1516682158.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:58.618Z,1516682158.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:35:58.624Z,1516682158.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:59.039Z,1516682159.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:35:59.040Z,1516682159.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:59.438Z,1516682159.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:35:59.439Z,1516682159.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:35:59.849Z,1516682159.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:35:59.850Z,1516682159.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:00.236Z,1516682160.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:36:00.237Z,1516682160.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:00.610Z,1516682160.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:36:00.631Z,1516682160.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:01.038Z,1516682161.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:01.416Z,1516682161.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:01.819Z,1516682161.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:02.245Z,1516682162.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:02.643Z,1516682162.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:03.052Z,1516682163.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:03.416Z,1516682163.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:03.852Z,1516682163.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:04.223Z,1516682164.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:04.621Z,1516682164.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:05.022Z,1516682165.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:05.429Z,1516682165.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:05.830Z,1516682165.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:06.223Z,1516682166.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:06.620Z,1516682166.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:07.020Z,1516682167.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:07.425Z,1516682167.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:07.820Z,1516682167.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:08.233Z,1516682168.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:08.633Z,1516682168.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:09.034Z,1516682169.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:09.424Z,1516682169.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:09.821Z,1516682169.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:10.224Z,1516682170.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:10.631Z,1516682170.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:11.030Z,1516682171.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:11.441Z,1516682171.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:11.836Z,1516682171.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:12.227Z,1516682172.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:12.622Z,1516682172.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:13.029Z,1516682173.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:13.432Z,1516682173.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:13.827Z,1516682173.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:14.234Z,1516682174.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:14.635Z,1516682174.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:15.031Z,1516682175.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:15.416Z,1516682175.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:15.831Z,1516682175.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:16.233Z,1516682176.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:16.609Z,1516682176.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:17.042Z,1516682177.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:17.441Z,1516682177.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:17.840Z,1516682177.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:18.233Z,1516682178.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:18.616Z,1516682178.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:19.037Z,1516682179.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:19.421Z,1516682179.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:19.817Z,1516682179.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:20.245Z,1516682180.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:20.638Z,1516682180.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:21.049Z,1516682181.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:21.425Z,1516682181.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:21.821Z,1516682181.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:22.222Z,1516682182.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:22.621Z,1516682182.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:23.029Z,1516682183.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:23.426Z,1516682183.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:23.829Z,1516682183.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:24.219Z,1516682184.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:24.625Z,1516682184.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:25.024Z,1516682185.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:25.428Z,1516682185.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:25.824Z,1516682185.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:26.233Z,1516682186.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:26.633Z,1516682186.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:27.030Z,1516682187.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:27.424Z,1516682187.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:27.821Z,1516682187.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:28.233Z,1516682188.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:28.621Z,1516682188.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:29.029Z,1516682189.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:29.434Z,1516682189.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:29.829Z,1516682189.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:30.221Z,1516682190.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:30.636Z,1516682190.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:31.021Z,1516682191.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:31.430Z,1516682191.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:31.826Z,1516682191.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:32.234Z,1516682192.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:32.633Z,1516682192.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:33.037Z,1516682193.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:33.427Z,1516682193.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:33.833Z,1516682193.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:34.229Z,1516682194.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:34.621Z,1516682194.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:35.043Z,1516682195.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:35.436Z,1516682195.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:38.551Z,1516682198.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:38.695Z,1516682198.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:39.045Z,1516682199.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:39.445Z,1516682199.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:39.848Z,1516682199.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:40.250Z,1516682200.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:40.649Z,1516682200.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:41.049Z,1516682201.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:41.441Z,1516682201.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:41.840Z,1516682201.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:42.242Z,1516682202.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:42.643Z,1516682202.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:43.054Z,1516682203.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:43.450Z,1516682203.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:43.857Z,1516682203.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:44.245Z,1516682204.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:44.656Z,1516682204.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:45.049Z,1516682205.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:45.447Z,1516682205.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:45.849Z,1516682205.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:46.251Z,1516682206.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:46.660Z,1516682206.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:47.050Z,1516682207.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:47.441Z,1516682207.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:47.858Z,1516682207.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:48.246Z,1516682208.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:48.648Z,1516682208.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:49.064Z,1516682209.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:49.451Z,1516682209.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:49.860Z,1516682209.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:50.242Z,1516682210.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:50.645Z,1516682210.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:51.045Z,1516682211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:51.443Z,1516682211.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:51.845Z,1516682211.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:52.250Z,1516682212.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:52.660Z,1516682212.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:53.051Z,1516682213.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:53.447Z,1516682213.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:53.858Z,1516682213.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:54.243Z,1516682214.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:54.647Z,1516682214.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:55.061Z,1516682215.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:55.454Z,1516682215.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:55.852Z,1516682215.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:56.243Z,1516682216.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:56.660Z,1516682216.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:57.049Z,1516682217.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:57.449Z,1516682217.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:57.845Z,1516682217.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:58.255Z,1516682218.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:58.656Z,1516682218.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:59.051Z,1516682219.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:59.442Z,1516682219.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:36:59.849Z,1516682219.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:00.247Z,1516682220.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:00.642Z,1516682220.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:01.052Z,1516682221.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:01.456Z,1516682221.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:01.850Z,1516682221.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:02.251Z,1516682222.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:02.637Z,1516682222.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:03.057Z,1516682223.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:03.436Z,1516682223.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:03.829Z,1516682223.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:04.265Z,1516682224.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:04.665Z,1516682224.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:05.065Z,1516682225.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:05.457Z,1516682225.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:05.859Z,1516682225.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:06.260Z,1516682226.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:06.661Z,1516682226.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:07.066Z,1516682227.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:07.442Z,1516682227.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:07.869Z,1516682227.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:08.244Z,1516682228.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:08.636Z,1516682228.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:09.038Z,1516682229.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:09.448Z,1516682229.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:09.840Z,1516682229.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:10.249Z,1516682230.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:10.650Z,1516682230.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:11.053Z,1516682231.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:11.443Z,1516682231.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:11.842Z,1516682231.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:12.241Z,1516682232.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:12.639Z,1516682232.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:13.053Z,1516682233.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:13.453Z,1516682233.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:13.853Z,1516682233.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:14.245Z,1516682234.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:14.641Z,1516682234.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:15.052Z,1516682235.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:15.453Z,1516682235.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:15.848Z,1516682235.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:16.254Z,1516682236.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:16.665Z,1516682236.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:17.055Z,1516682237.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:17.453Z,1516682237.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:17.849Z,1516682237.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:18.252Z,1516682238.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:18.649Z,1516682238.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:19.060Z,1516682239.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:19.458Z,1516682239.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:19.864Z,1516682239.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:20.243Z,1516682240.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:20.667Z,1516682240.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:21.036Z,1516682241.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:21.439Z,1516682241.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:21.841Z,1516682241.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:22.250Z,1516682242.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:22.645Z,1516682242.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:23.042Z,1516682243.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:23.444Z,1516682243.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:23.849Z,1516682243.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:24.241Z,1516682244.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:24.645Z,1516682244.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:25.046Z,1516682245.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:25.450Z,1516682245.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:25.849Z,1516682245.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:26.240Z,1516682246.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:26.657Z,1516682246.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:27.053Z,1516682247.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:27.448Z,1516682247.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:27.853Z,1516682247.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:28.239Z,1516682248.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:28.639Z,1516682248.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:29.039Z,1516682249.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:29.442Z,1516682249.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:29.838Z,1516682249.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:30.249Z,1516682250.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:30.653Z,1516682250.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:31.057Z,1516682251.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:31.449Z,1516682251.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:31.846Z,1516682251.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:32.244Z,1516682252.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:32.644Z,1516682252.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:33.049Z,1516682253.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:33.456Z,1516682253.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:33.851Z,1516682253.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:34.247Z,1516682254.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:34.642Z,1516682254.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:35.050Z,1516682255.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:35.453Z,1516682255.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:38.549Z,1516682258.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:38.693Z,1516682258.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:39.041Z,1516682259.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:39.420Z,1516682259.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:39.817Z,1516682259.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:40.246Z,1516682260.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:40.625Z,1516682260.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:41.047Z,1516682261.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:41.415Z,1516682261.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:41.823Z,1516682261.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:42.216Z,1516682262.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:42.621Z,1516682262.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:43.018Z,1516682263.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:43.446Z,1516682263.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:43.818Z,1516682263.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:44.216Z,1516682264.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:44.614Z,1516682264.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:45.018Z,1516682265.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:45.421Z,1516682265.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:45.846Z,1516682265.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:46.216Z,1516682266.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:46.615Z,1516682266.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:47.022Z,1516682267.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:47.426Z,1516682267.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:47.828Z,1516682267.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:48.229Z,1516682268.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:48.615Z,1516682268.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:49.028Z,1516682269.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:49.434Z,1516682269.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:49.829Z,1516682269.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:50.221Z,1516682270.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:50.620Z,1516682270.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:51.026Z,1516682271.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:51.427Z,1516682271.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:51.826Z,1516682271.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:52.216Z,1516682272.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:52.619Z,1516682272.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:53.025Z,1516682273.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:53.426Z,1516682273.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:53.827Z,1516682273.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:54.226Z,1516682274.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:54.625Z,1516682274.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:55.022Z,1516682275.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:55.429Z,1516682275.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:55.822Z,1516682275.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:56.228Z,1516682276.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:56.641Z,1516682276.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:57.031Z,1516682277.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:57.418Z,1516682277.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:57.821Z,1516682277.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:58.221Z,1516682278.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:58.619Z,1516682278.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:59.025Z,1516682279.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:59.426Z,1516682279.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:37:59.836Z,1516682279.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:00.226Z,1516682280.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:00.621Z,1516682280.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:01.027Z,1516682281.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:01.421Z,1516682281.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:01.821Z,1516682281.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:02.228Z,1516682282.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:02.629Z,1516682282.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:03.029Z,1516682283.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:03.422Z,1516682283.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:03.825Z,1516682283.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:04.225Z,1516682284.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:04.628Z,1516682284.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:05.028Z,1516682285.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:05.433Z,1516682285.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:05.831Z,1516682285.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:06.230Z,1516682286.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:06.627Z,1516682286.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:07.028Z,1516682287.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:07.427Z,1516682287.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:07.827Z,1516682287.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:08.236Z,1516682288.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:08.635Z,1516682288.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:09.030Z,1516682289.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:09.428Z,1516682289.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:09.827Z,1516682289.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:10.227Z,1516682290.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:10.628Z,1516682290.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:11.027Z,1516682291.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:11.436Z,1516682291.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:11.835Z,1516682291.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:12.230Z,1516682292.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:12.627Z,1516682292.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:13.028Z,1516682293.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:13.420Z,1516682293.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:13.829Z,1516682293.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:14.235Z,1516682294.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:14.630Z,1516682294.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:15.037Z,1516682295.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:15.444Z,1516682295.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:15.837Z,1516682295.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:16.212Z,1516682296.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:16.616Z,1516682296.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:17.009Z,1516682297.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:17.439Z,1516682297.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:17.843Z,1516682297.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:18.239Z,1516682298.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:18.618Z,1516682298.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:19.024Z,1516682299.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:19.425Z,1516682299.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:19.818Z,1516682299.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:20.218Z,1516682300.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:20.622Z,1516682300.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:21.025Z,1516682301.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:21.416Z,1516682301.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:21.820Z,1516682301.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:22.215Z,1516682302.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:22.617Z,1516682302.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:23.015Z,1516682303.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:23.425Z,1516682303.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:23.821Z,1516682303.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:24.222Z,1516682304.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:24.621Z,1516682304.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:25.016Z,1516682305.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:25.417Z,1516682305.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:25.821Z,1516682305.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:26.221Z,1516682306.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:26.622Z,1516682306.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:27.034Z,1516682307.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:27.416Z,1516682307.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:27.817Z,1516682307.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:28.218Z,1516682308.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:28.624Z,1516682308.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:29.025Z,1516682309.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:29.433Z,1516682309.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:29.830Z,1516682309.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:30.231Z,1516682310.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:30.619Z,1516682310.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:31.017Z,1516682311.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:31.420Z,1516682311.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:31.820Z,1516682311.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:32.236Z,1516682312.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:32.630Z,1516682312.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:33.027Z,1516682313.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:33.420Z,1516682313.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:33.827Z,1516682313.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:34.220Z,1516682314.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:34.625Z,1516682314.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:35.020Z,1516682315.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:35.433Z,1516682315.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:35.830Z,1516682315.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:38.919Z,1516682318.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:39.057Z,1516682319.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:39.384Z,1516682319.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:39.784Z,1516682319.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:40.206Z,1516682320.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:40.613Z,1516682320.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:40.996Z,1516682320.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:41.383Z,1516682321.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:41.791Z,1516682321.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:41.791Z,1516682321.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-01-23T04:38:41.791Z,1516682321.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:38:41.793Z,1516682321.793 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:41.793Z,1516682321.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-01-23T04:38:41.793Z,1516682321.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:38:41.803Z,1516682321.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:41.803Z,1516682321.803 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28 2018-01-23T04:38:41.803Z,1516682321.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:38:41.827Z,1516682321.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:38:41.827Z,1516682321.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:38:41.828Z,1516682321.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:38:42.194Z,1516682322.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:38:42.194Z,1516682322.194 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-01-23T04:38:42.195Z,1516682322.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:38:42.195Z,1516682322.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-01-23T04:38:42.195Z,1516682322.195 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:38:42.195Z,1516682322.195 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28 2018-01-23T04:38:42.585Z,1516682322.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:38:42.586Z,1516682322.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:38:42.586Z,1516682322.586 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:38:42.587Z,1516682322.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:38:42.587Z,1516682322.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:38:42.587Z,1516682322.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:38:42.588Z,1516682322.588 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:38:42.588Z,1516682322.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:38:42.589Z,1516682322.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:38:42.991Z,1516682322.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:38:42.992Z,1516682322.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:43.400Z,1516682323.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:38:43.401Z,1516682323.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:43.796Z,1516682323.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:38:43.797Z,1516682323.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:44.200Z,1516682324.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:38:44.201Z,1516682324.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:44.584Z,1516682324.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:38:44.585Z,1516682324.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:44.985Z,1516682324.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:38:44.986Z,1516682324.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:45.389Z,1516682325.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:38:45.390Z,1516682325.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:45.788Z,1516682325.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:38:45.789Z,1516682325.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:46.193Z,1516682326.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:38:46.194Z,1516682326.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:46.597Z,1516682326.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:38:46.598Z,1516682326.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:47.005Z,1516682327.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:38:47.006Z,1516682327.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:47.385Z,1516682327.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:38:47.386Z,1516682327.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:47.791Z,1516682327.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:38:47.792Z,1516682327.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:48.196Z,1516682328.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:38:48.197Z,1516682328.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:48.589Z,1516682328.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:38:48.590Z,1516682328.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:48.991Z,1516682328.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:38:48.992Z,1516682328.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:49.397Z,1516682329.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:38:49.398Z,1516682329.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:49.798Z,1516682329.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:38:49.799Z,1516682329.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:50.203Z,1516682330.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:38:50.204Z,1516682330.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:50.599Z,1516682330.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:38:50.600Z,1516682330.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:50.975Z,1516682330.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:38:50.976Z,1516682330.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:51.381Z,1516682331.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:38:51.382Z,1516682331.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:51.779Z,1516682331.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:38:51.780Z,1516682331.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:52.198Z,1516682332.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:38:52.215Z,1516682332.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:52.590Z,1516682332.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:38:52.591Z,1516682332.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:52.990Z,1516682332.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:38:52.991Z,1516682332.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:53.384Z,1516682333.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:38:53.385Z,1516682333.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:53.794Z,1516682333.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:38:53.796Z,1516682333.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:54.188Z,1516682334.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:38:54.189Z,1516682334.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:54.589Z,1516682334.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:38:54.590Z,1516682334.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:54.985Z,1516682334.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:38:54.986Z,1516682334.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:55.390Z,1516682335.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:38:55.391Z,1516682335.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:55.791Z,1516682335.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:38:55.792Z,1516682335.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:56.197Z,1516682336.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:38:56.198Z,1516682336.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:56.588Z,1516682336.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:38:56.589Z,1516682336.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:56.987Z,1516682336.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:38:56.988Z,1516682336.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:57.384Z,1516682337.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:38:57.385Z,1516682337.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:57.792Z,1516682337.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:38:57.793Z,1516682337.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:58.192Z,1516682338.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:38:58.193Z,1516682338.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:58.596Z,1516682338.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:38:58.597Z,1516682338.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:58.993Z,1516682338.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:38:58.994Z,1516682338.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:59.385Z,1516682339.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:38:59.386Z,1516682339.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:38:59.786Z,1516682339.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:38:59.791Z,1516682339.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:00.194Z,1516682340.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:39:00.195Z,1516682340.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:00.597Z,1516682340.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:39:00.598Z,1516682340.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:00.996Z,1516682340.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:39:00.997Z,1516682340.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:01.385Z,1516682341.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:39:01.386Z,1516682341.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:01.785Z,1516682341.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:39:01.786Z,1516682341.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:02.201Z,1516682342.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:02.597Z,1516682342.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:03.005Z,1516682343.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:03.393Z,1516682343.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:03.784Z,1516682343.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:04.189Z,1516682344.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:04.587Z,1516682344.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:04.992Z,1516682344.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:05.405Z,1516682345.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:05.802Z,1516682345.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:06.215Z,1516682346.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:06.585Z,1516682346.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:06.996Z,1516682346.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:07.397Z,1516682347.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:07.797Z,1516682347.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:08.204Z,1516682348.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:08.600Z,1516682348.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:09.003Z,1516682349.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:09.396Z,1516682349.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:09.800Z,1516682349.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:10.208Z,1516682350.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:10.612Z,1516682350.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:10.999Z,1516682350.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:11.420Z,1516682351.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:11.792Z,1516682351.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:12.205Z,1516682352.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:12.612Z,1516682352.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:12.996Z,1516682352.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:13.404Z,1516682353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:13.796Z,1516682353.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:14.209Z,1516682354.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:14.609Z,1516682354.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:15.009Z,1516682355.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:15.403Z,1516682355.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:15.808Z,1516682355.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:16.202Z,1516682356.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:16.603Z,1516682356.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:16.000Z,1516682357.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:17.408Z,1516682357.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:17.809Z,1516682357.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:18.213Z,1516682358.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:18.594Z,1516682358.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:18.998Z,1516682358.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:19.388Z,1516682359.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:19.785Z,1516682359.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:20.190Z,1516682360.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:20.593Z,1516682360.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:20.994Z,1516682360.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:21.385Z,1516682361.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:21.788Z,1516682361.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:22.194Z,1516682362.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:22.594Z,1516682362.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:22.996Z,1516682362.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:23.392Z,1516682363.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:23.785Z,1516682363.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:24.194Z,1516682364.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:24.589Z,1516682364.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:24.999Z,1516682364.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:25.388Z,1516682365.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:25.788Z,1516682365.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:26.194Z,1516682366.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:26.600Z,1516682366.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:27.001Z,1516682367.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:27.389Z,1516682367.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:27.789Z,1516682367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:28.197Z,1516682368.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:28.594Z,1516682368.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:29.025Z,1516682369.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:29.387Z,1516682369.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:29.801Z,1516682369.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:30.204Z,1516682370.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:30.597Z,1516682370.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:30.997Z,1516682370.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:31.410Z,1516682371.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:31.795Z,1516682371.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:32.201Z,1516682372.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:32.607Z,1516682372.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:32.999Z,1516682372.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:33.395Z,1516682373.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:33.803Z,1516682373.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:34.206Z,1516682374.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:34.612Z,1516682374.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:35.011Z,1516682375.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:35.376Z,1516682375.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:35.804Z,1516682375.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:36.209Z,1516682376.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:39.276Z,1516682379.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.276Z,1516682379.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.277Z,1516682379.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.277Z,1516682379.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.277Z,1516682379.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.278Z,1516682379.278 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.278Z,1516682379.278 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T04:39:39.337Z,1516682379.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:39.458Z,1516682379.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:39.823Z,1516682379.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:40.217Z,1516682380.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:40.621Z,1516682380.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:41.019Z,1516682381.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:41.424Z,1516682381.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:41.832Z,1516682381.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:42.225Z,1516682382.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:42.619Z,1516682382.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:43.023Z,1516682383.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:43.428Z,1516682383.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:43.824Z,1516682383.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:44.228Z,1516682384.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:44.628Z,1516682384.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:45.029Z,1516682385.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:45.433Z,1516682385.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:45.807Z,1516682385.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:46.231Z,1516682386.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:46.638Z,1516682386.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:47.038Z,1516682387.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:47.410Z,1516682387.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:47.815Z,1516682387.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:48.217Z,1516682388.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:48.621Z,1516682388.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:49.017Z,1516682389.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:49.413Z,1516682389.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:49.817Z,1516682389.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:50.221Z,1516682390.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:50.629Z,1516682390.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:51.023Z,1516682391.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:51.416Z,1516682391.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:51.810Z,1516682391.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:52.221Z,1516682392.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:52.633Z,1516682392.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:53.018Z,1516682393.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:53.416Z,1516682393.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:53.813Z,1516682393.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:54.219Z,1516682394.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:54.618Z,1516682394.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:55.028Z,1516682395.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:55.425Z,1516682395.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:55.817Z,1516682395.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:56.215Z,1516682396.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:56.613Z,1516682396.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:57.029Z,1516682397.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:57.415Z,1516682397.415 [PNI_TCM](ERROR): CRC does not match. Expected:0x40326 got:0x33304 2018-01-23T04:39:57.456Z,1516682397.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:57.821Z,1516682397.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:58.224Z,1516682398.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:58.628Z,1516682398.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:59.023Z,1516682399.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:59.418Z,1516682399.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:39:59.802Z,1516682399.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:00.227Z,1516682400.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:00.627Z,1516682400.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:01.037Z,1516682401.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:01.429Z,1516682401.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:01.829Z,1516682401.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:02.227Z,1516682402.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:02.604Z,1516682402.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:03.009Z,1516682403.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:03.429Z,1516682403.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:03.809Z,1516682403.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T04:40:03.830Z,1516682403.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:04.213Z,1516682404.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x49368 got:0x63020 2018-01-23T04:40:04.241Z,1516682404.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:04.611Z,1516682404.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:05.013Z,1516682405.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:05.403Z,1516682405.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:05.809Z,1516682405.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:06.207Z,1516682406.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:06.632Z,1516682406.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:07.013Z,1516682407.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:07.412Z,1516682407.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:07.808Z,1516682407.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:08.230Z,1516682408.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:08.604Z,1516682408.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:09.009Z,1516682409.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:09.410Z,1516682409.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:09.837Z,1516682409.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:10.237Z,1516682410.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:10.608Z,1516682410.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:11.008Z,1516682411.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:11.408Z,1516682411.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:11.811Z,1516682411.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:12.207Z,1516682412.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:12.614Z,1516682412.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:13.041Z,1516682413.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:13.424Z,1516682413.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:13.811Z,1516682413.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:14.209Z,1516682414.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:14.605Z,1516682414.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:15.009Z,1516682415.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:15.419Z,1516682415.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:15.818Z,1516682415.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:16.221Z,1516682416.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:16.617Z,1516682416.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:17.016Z,1516682417.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:17.413Z,1516682417.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:17.811Z,1516682417.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:18.219Z,1516682418.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:18.629Z,1516682418.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:19.032Z,1516682419.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:19.418Z,1516682419.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:19.819Z,1516682419.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:20.197Z,1516682420.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:20.596Z,1516682420.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:21.027Z,1516682421.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:21.424Z,1516682421.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:21.835Z,1516682421.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:22.227Z,1516682422.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:22.627Z,1516682422.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:22.999Z,1516682422.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:23.409Z,1516682423.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:23.804Z,1516682423.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:24.212Z,1516682424.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:24.636Z,1516682424.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:25.014Z,1516682425.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:25.439Z,1516682425.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:25.806Z,1516682425.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:26.213Z,1516682426.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:26.610Z,1516682426.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:27.007Z,1516682427.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:27.423Z,1516682427.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:27.825Z,1516682427.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:28.216Z,1516682428.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:28.613Z,1516682428.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:29.015Z,1516682429.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:29.401Z,1516682429.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:29.808Z,1516682429.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:30.220Z,1516682430.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:30.618Z,1516682430.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:31.024Z,1516682431.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:31.432Z,1516682431.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:31.805Z,1516682431.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:32.213Z,1516682432.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:32.608Z,1516682432.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:33.002Z,1516682433.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:33.413Z,1516682433.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:33.808Z,1516682433.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:34.221Z,1516682434.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:34.605Z,1516682434.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:35.012Z,1516682435.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:35.408Z,1516682435.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:35.411Z,1516682435.411 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T04:40:35.411Z,1516682435.411 [Default:CheckIn:C.Wait] Stopped 2018-01-23T04:40:35.412Z,1516682435.412 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T04:40:35.412Z,1516682435.412 [Default:CheckIn:D] Running Loop=1 2018-01-23T04:40:35.806Z,1516682435.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:35.809Z,1516682435.809 [Default:CheckIn:D] Stopped 2018-01-23T04:40:35.809Z,1516682435.809 [Default:CheckIn:E] Running Loop=1 2018-01-23T04:40:36.208Z,1516682436.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.729159 min 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn:E] Stopped 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn] Stopped 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T04:40:36.212Z,1516682436.212 [Default:CheckIn](INFO): Running loop #9 2018-01-23T04:40:36.213Z,1516682436.213 [Default:CheckIn] Running Loop=9 2018-01-23T04:40:36.213Z,1516682436.213 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T04:40:36.213Z,1516682436.213 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T04:40:39.314Z,1516682439.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:39.473Z,1516682439.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:39.809Z,1516682439.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:40.180Z,1516682440.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:40.601Z,1516682440.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:40.985Z,1516682440.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:41.407Z,1516682441.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:41.810Z,1516682441.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:42.186Z,1516682442.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:42.580Z,1516682442.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:42.980Z,1516682442.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:43.380Z,1516682443.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:43.786Z,1516682443.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:44.179Z,1516682444.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:44.586Z,1516682444.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:45.011Z,1516682445.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:45.390Z,1516682445.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:45.789Z,1516682445.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:46.180Z,1516682446.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:46.581Z,1516682446.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:46.985Z,1516682446.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:47.394Z,1516682447.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:47.794Z,1516682447.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:48.193Z,1516682448.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:48.581Z,1516682448.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:48.981Z,1516682448.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:49.383Z,1516682449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:49.788Z,1516682449.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:50.181Z,1516682450.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:50.600Z,1516682450.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:50.994Z,1516682450.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:51.398Z,1516682451.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:51.785Z,1516682451.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:52.181Z,1516682452.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:52.584Z,1516682452.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:52.985Z,1516682452.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:53.390Z,1516682453.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:53.801Z,1516682453.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:54.189Z,1516682454.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:54.581Z,1516682454.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:54.985Z,1516682454.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:55.381Z,1516682455.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:55.781Z,1516682455.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:56.185Z,1516682456.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:56.589Z,1516682456.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:57.000Z,1516682457.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:57.389Z,1516682457.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:57.785Z,1516682457.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:58.184Z,1516682458.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:58.585Z,1516682458.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:58.993Z,1516682458.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:59.394Z,1516682459.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:40:59.794Z,1516682459.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:00.197Z,1516682460.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:00.585Z,1516682460.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:00.985Z,1516682460.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:01.393Z,1516682461.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:01.774Z,1516682461.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:02.174Z,1516682462.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:02.586Z,1516682462.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:03.068Z,1516682463.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:03.396Z,1516682463.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:03.789Z,1516682463.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:04.187Z,1516682464.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:04.586Z,1516682464.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:04.989Z,1516682464.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:05.393Z,1516682465.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:05.796Z,1516682465.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:06.196Z,1516682466.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:06.592Z,1516682466.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:06.985Z,1516682466.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:07.394Z,1516682467.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:07.799Z,1516682467.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:08.195Z,1516682468.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:08.593Z,1516682468.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:08.988Z,1516682468.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:09.391Z,1516682469.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:09.798Z,1516682469.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:10.195Z,1516682470.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:10.587Z,1516682470.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:10.991Z,1516682470.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:11.395Z,1516682471.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:11.794Z,1516682471.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:12.190Z,1516682472.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:12.588Z,1516682472.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:12.987Z,1516682472.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:13.394Z,1516682473.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:13.798Z,1516682473.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:14.197Z,1516682474.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:14.601Z,1516682474.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:14.979Z,1516682474.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:15.382Z,1516682475.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:15.801Z,1516682475.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:16.202Z,1516682476.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:16.581Z,1516682476.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:16.985Z,1516682476.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:17.386Z,1516682477.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:17.782Z,1516682477.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:18.186Z,1516682478.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:18.581Z,1516682478.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:18.981Z,1516682478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:19.386Z,1516682479.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:19.785Z,1516682479.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:20.210Z,1516682480.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:20.588Z,1516682480.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:20.980Z,1516682480.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:21.382Z,1516682481.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:21.786Z,1516682481.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:22.188Z,1516682482.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:22.582Z,1516682482.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:22.980Z,1516682482.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:23.388Z,1516682483.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:23.786Z,1516682483.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:24.182Z,1516682484.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:24.581Z,1516682484.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:24.980Z,1516682484.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:25.382Z,1516682485.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:25.785Z,1516682485.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:26.194Z,1516682486.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:26.586Z,1516682486.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:26.981Z,1516682486.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:27.391Z,1516682487.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:27.791Z,1516682487.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:28.190Z,1516682488.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:28.583Z,1516682488.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:28.989Z,1516682488.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:29.390Z,1516682489.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:29.740Z,1516682489.740 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T04:41:29.740Z,1516682489.740 [NAL9602] Data Fault, FailCount= 3 2018-01-23T04:41:29.740Z,1516682489.740 [NAL9602](ERROR): Data Fault 2018-01-23T04:41:29.795Z,1516682489.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:29.812Z,1516682489.812 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T04:41:30.140Z,1516682490.140 [NAL9602](INFO): Powering down 2018-01-23T04:41:30.197Z,1516682490.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:30.595Z,1516682490.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:30.971Z,1516682490.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:31.009Z,1516682491.009 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T04:41:31.009Z,1516682491.009 [NAL9602] No Fault, FailCount= 3 2018-01-23T04:41:31.403Z,1516682491.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:31.779Z,1516682491.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:32.170Z,1516682492.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:32.576Z,1516682492.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:32.975Z,1516682492.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:33.372Z,1516682493.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:33.785Z,1516682493.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:34.180Z,1516682494.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:34.575Z,1516682494.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:34.980Z,1516682494.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:35.386Z,1516682495.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:35.776Z,1516682495.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:36.184Z,1516682496.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:36.581Z,1516682496.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:39.681Z,1516682499.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:39.816Z,1516682499.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:40.173Z,1516682500.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:40.577Z,1516682500.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:40.973Z,1516682500.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:41.388Z,1516682501.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:41.778Z,1516682501.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.178Z,1516682502.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.583Z,1516682502.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.976Z,1516682502.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.976Z,1516682502.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-01-23T04:41:42.976Z,1516682502.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:41:42.978Z,1516682502.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.978Z,1516682502.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-01-23T04:41:42.978Z,1516682502.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:41:42.980Z,1516682502.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:42.980Z,1516682502.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29 2018-01-23T04:41:42.980Z,1516682502.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:41:42.992Z,1516682502.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:41:42.992Z,1516682502.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:41:42.992Z,1516682502.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:41:43.398Z,1516682503.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:41:43.398Z,1516682503.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-01-23T04:41:43.403Z,1516682503.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:41:43.403Z,1516682503.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-01-23T04:41:43.403Z,1516682503.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:41:43.403Z,1516682503.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29 2018-01-23T04:41:43.777Z,1516682503.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:41:43.777Z,1516682503.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:41:43.778Z,1516682503.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:41:43.778Z,1516682503.778 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:41:43.779Z,1516682503.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:41:43.780Z,1516682503.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:41:43.780Z,1516682503.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:41:43.780Z,1516682503.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:41:43.781Z,1516682503.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:41:44.196Z,1516682504.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:41:44.197Z,1516682504.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:44.576Z,1516682504.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:41:44.576Z,1516682504.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:44.984Z,1516682504.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:41:44.985Z,1516682504.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:45.386Z,1516682505.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:41:45.387Z,1516682505.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:45.781Z,1516682505.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:41:45.782Z,1516682505.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:46.177Z,1516682506.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:41:46.178Z,1516682506.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:46.562Z,1516682506.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:41:46.563Z,1516682506.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:46.961Z,1516682506.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:41:46.961Z,1516682506.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:47.391Z,1516682507.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:41:47.392Z,1516682507.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:47.767Z,1516682507.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:41:47.768Z,1516682507.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:48.171Z,1516682508.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:41:48.172Z,1516682508.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:48.571Z,1516682508.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:41:48.572Z,1516682508.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:48.971Z,1516682508.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:41:48.972Z,1516682508.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:49.370Z,1516682509.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:41:49.371Z,1516682509.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:49.774Z,1516682509.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:41:49.775Z,1516682509.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:50.171Z,1516682510.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:41:50.172Z,1516682510.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:50.571Z,1516682510.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:41:50.572Z,1516682510.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:50.972Z,1516682510.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:41:50.973Z,1516682510.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:51.390Z,1516682511.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:41:51.407Z,1516682511.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:51.772Z,1516682511.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:41:51.773Z,1516682511.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:52.173Z,1516682512.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:41:52.174Z,1516682512.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:52.576Z,1516682512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:41:52.577Z,1516682512.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:52.970Z,1516682512.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:41:52.972Z,1516682512.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:53.382Z,1516682513.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:41:53.383Z,1516682513.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:53.771Z,1516682513.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:41:53.772Z,1516682513.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:54.171Z,1516682514.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:41:54.172Z,1516682514.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:54.574Z,1516682514.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:41:54.576Z,1516682514.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:54.973Z,1516682514.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:41:54.974Z,1516682514.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:55.373Z,1516682515.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:41:55.374Z,1516682515.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:55.780Z,1516682515.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:41:55.781Z,1516682515.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:56.182Z,1516682516.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:41:56.183Z,1516682516.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:56.580Z,1516682516.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:41:56.581Z,1516682516.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:56.979Z,1516682516.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:41:56.980Z,1516682516.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:57.382Z,1516682517.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:41:57.383Z,1516682517.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:57.773Z,1516682517.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:41:57.774Z,1516682517.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:58.179Z,1516682518.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:41:58.180Z,1516682518.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:58.582Z,1516682518.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:41:58.583Z,1516682518.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:58.973Z,1516682518.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:41:58.974Z,1516682518.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:59.379Z,1516682519.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:41:59.380Z,1516682519.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:41:59.782Z,1516682519.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:41:59.783Z,1516682519.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:00.173Z,1516682520.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:42:00.174Z,1516682520.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:00.532Z,1516682520.532 [NAL9602](INFO): Powering up NAL9602 2018-01-23T04:42:00.587Z,1516682520.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:42:00.588Z,1516682520.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:00.973Z,1516682520.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:42:00.974Z,1516682520.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:01.384Z,1516682521.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:42:01.385Z,1516682521.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:01.779Z,1516682521.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:42:01.780Z,1516682521.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:02.180Z,1516682522.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:42:02.181Z,1516682522.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:02.580Z,1516682522.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:42:02.581Z,1516682522.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:02.976Z,1516682522.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:42:02.977Z,1516682522.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:03.374Z,1516682523.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:03.780Z,1516682523.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:04.180Z,1516682524.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:04.583Z,1516682524.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:04.974Z,1516682524.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:05.382Z,1516682525.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:05.780Z,1516682525.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:06.181Z,1516682526.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:06.584Z,1516682526.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:06.984Z,1516682526.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:07.362Z,1516682527.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:07.785Z,1516682527.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:08.164Z,1516682528.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:08.566Z,1516682528.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:08.973Z,1516682528.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:09.370Z,1516682529.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:09.768Z,1516682529.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:10.172Z,1516682530.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:10.577Z,1516682530.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:10.974Z,1516682530.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:11.336Z,1516682531.336 [NAL9602](INFO): NAL9602 initialized 2018-01-23T04:42:11.381Z,1516682531.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:11.778Z,1516682531.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:12.178Z,1516682532.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:12.577Z,1516682532.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:12.971Z,1516682532.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:13.372Z,1516682533.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:13.781Z,1516682533.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:14.172Z,1516682534.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:14.578Z,1516682534.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:14.990Z,1516682534.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:15.388Z,1516682535.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:15.777Z,1516682535.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:16.183Z,1516682536.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:16.573Z,1516682536.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:16.974Z,1516682536.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:17.387Z,1516682537.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:17.785Z,1516682537.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:18.185Z,1516682538.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:18.589Z,1516682538.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:18.977Z,1516682538.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:19.377Z,1516682539.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:19.776Z,1516682539.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:20.173Z,1516682540.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:20.585Z,1516682540.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:20.987Z,1516682540.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:21.387Z,1516682541.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:21.785Z,1516682541.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:22.173Z,1516682542.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:22.574Z,1516682542.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:22.975Z,1516682542.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:23.383Z,1516682543.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:23.789Z,1516682543.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:24.186Z,1516682544.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:24.589Z,1516682544.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:24.977Z,1516682544.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:25.373Z,1516682545.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:25.778Z,1516682545.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:26.174Z,1516682546.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:26.584Z,1516682546.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:26.987Z,1516682546.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:27.382Z,1516682547.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:27.781Z,1516682547.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:28.176Z,1516682548.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:28.583Z,1516682548.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:28.975Z,1516682548.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:29.386Z,1516682549.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:29.790Z,1516682549.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:30.188Z,1516682550.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:30.580Z,1516682550.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:30.982Z,1516682550.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:31.370Z,1516682551.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:31.779Z,1516682551.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:32.184Z,1516682552.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:32.584Z,1516682552.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:32.997Z,1516682552.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:33.382Z,1516682553.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:33.780Z,1516682553.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:34.184Z,1516682554.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:34.584Z,1516682554.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:34.976Z,1516682554.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:35.385Z,1516682555.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:35.797Z,1516682555.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:36.189Z,1516682556.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:36.592Z,1516682556.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:36.968Z,1516682556.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:40.062Z,1516682560.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:40.213Z,1516682560.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:40.569Z,1516682560.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:40.962Z,1516682560.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:41.362Z,1516682561.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:41.753Z,1516682561.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:42.160Z,1516682562.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:42.555Z,1516682562.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:42.964Z,1516682562.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:43.366Z,1516682563.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:43.771Z,1516682563.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:44.163Z,1516682564.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:44.565Z,1516682564.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:44.959Z,1516682564.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:45.365Z,1516682565.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:45.761Z,1516682565.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:46.165Z,1516682566.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:46.573Z,1516682566.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:46.970Z,1516682566.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:47.377Z,1516682567.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:47.769Z,1516682567.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:48.143Z,1516682568.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:48.544Z,1516682568.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:48.976Z,1516682568.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:49.375Z,1516682569.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:49.783Z,1516682569.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:50.182Z,1516682570.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:50.552Z,1516682570.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:50.951Z,1516682570.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:51.354Z,1516682571.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:51.754Z,1516682571.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:52.153Z,1516682572.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:52.563Z,1516682572.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:52.962Z,1516682572.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:53.369Z,1516682573.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:53.754Z,1516682573.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:54.153Z,1516682574.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:54.555Z,1516682574.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:54.954Z,1516682574.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:55.367Z,1516682575.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:55.767Z,1516682575.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:56.163Z,1516682576.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:56.554Z,1516682576.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:56.949Z,1516682576.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:57.354Z,1516682577.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:57.753Z,1516682577.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:58.157Z,1516682578.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:58.582Z,1516682578.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:58.981Z,1516682578.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:59.356Z,1516682579.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:42:59.752Z,1516682579.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:00.152Z,1516682580.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:00.552Z,1516682580.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:00.951Z,1516682580.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:01.356Z,1516682581.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:01.765Z,1516682581.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:02.165Z,1516682582.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:02.553Z,1516682582.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:02.953Z,1516682582.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:03.353Z,1516682583.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:03.754Z,1516682583.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:04.152Z,1516682584.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:04.561Z,1516682584.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:04.963Z,1516682584.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:05.357Z,1516682585.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:05.753Z,1516682585.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:06.157Z,1516682586.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:06.560Z,1516682586.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:06.951Z,1516682586.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:07.363Z,1516682587.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:07.762Z,1516682587.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:08.164Z,1516682588.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:08.557Z,1516682588.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:08.954Z,1516682588.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:09.359Z,1516682589.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:09.757Z,1516682589.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:10.154Z,1516682590.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:10.562Z,1516682590.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:10.966Z,1516682590.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:11.362Z,1516682591.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:11.751Z,1516682591.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:12.161Z,1516682592.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:12.561Z,1516682592.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:12.955Z,1516682592.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:13.363Z,1516682593.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:13.766Z,1516682593.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:14.164Z,1516682594.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:14.561Z,1516682594.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:14.954Z,1516682594.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:15.351Z,1516682595.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:15.759Z,1516682595.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:16.155Z,1516682596.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:16.562Z,1516682596.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:16.966Z,1516682596.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:17.365Z,1516682597.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:17.759Z,1516682597.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:18.161Z,1516682598.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:18.554Z,1516682598.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:18.964Z,1516682598.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:19.366Z,1516682599.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:19.765Z,1516682599.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:20.165Z,1516682600.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:20.561Z,1516682600.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:20.957Z,1516682600.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:21.360Z,1516682601.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:21.759Z,1516682601.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:22.154Z,1516682602.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:22.565Z,1516682602.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:22.967Z,1516682602.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:23.369Z,1516682603.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:23.759Z,1516682603.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:24.161Z,1516682604.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:24.562Z,1516682604.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:24.953Z,1516682604.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:25.370Z,1516682605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:25.766Z,1516682605.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:26.169Z,1516682606.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:26.565Z,1516682606.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:26.956Z,1516682606.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:27.358Z,1516682607.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:27.768Z,1516682607.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:28.165Z,1516682608.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:28.569Z,1516682608.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:28.973Z,1516682608.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:29.373Z,1516682609.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:29.759Z,1516682609.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:30.164Z,1516682610.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:30.557Z,1516682610.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:30.960Z,1516682610.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:31.370Z,1516682611.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:31.768Z,1516682611.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:32.168Z,1516682612.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:32.561Z,1516682612.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:32.957Z,1516682612.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:33.365Z,1516682613.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:33.769Z,1516682613.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:34.167Z,1516682614.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:34.555Z,1516682614.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:34.962Z,1516682614.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:35.369Z,1516682615.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:35.770Z,1516682615.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:36.172Z,1516682616.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:36.559Z,1516682616.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:36.963Z,1516682616.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:37.382Z,1516682617.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:40.465Z,1516682620.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:40.612Z,1516682620.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:40.957Z,1516682620.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:41.353Z,1516682621.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:41.732Z,1516682621.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:42.135Z,1516682622.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:42.562Z,1516682622.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:42.963Z,1516682622.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:43.338Z,1516682623.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:43.731Z,1516682623.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:44.136Z,1516682624.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:44.532Z,1516682624.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:44.936Z,1516682624.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:45.335Z,1516682625.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:45.741Z,1516682625.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:46.144Z,1516682626.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:46.529Z,1516682626.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:46.932Z,1516682626.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:47.335Z,1516682627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:47.734Z,1516682627.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:48.138Z,1516682628.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:48.542Z,1516682628.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:48.965Z,1516682628.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:49.345Z,1516682629.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:49.740Z,1516682629.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:50.131Z,1516682630.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:50.544Z,1516682630.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:50.941Z,1516682630.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:51.341Z,1516682631.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:51.730Z,1516682631.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:52.131Z,1516682632.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:52.530Z,1516682632.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:52.934Z,1516682632.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:53.331Z,1516682633.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:53.750Z,1516682633.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:54.149Z,1516682634.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:54.542Z,1516682634.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:54.933Z,1516682634.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:55.337Z,1516682635.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:55.734Z,1516682635.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:56.139Z,1516682636.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:56.543Z,1516682636.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:56.956Z,1516682636.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:57.346Z,1516682637.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:57.745Z,1516682637.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:58.140Z,1516682638.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:58.533Z,1516682638.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:58.934Z,1516682638.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:59.341Z,1516682639.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:43:59.749Z,1516682639.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:00.149Z,1516682640.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:00.562Z,1516682640.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:00.929Z,1516682640.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:01.344Z,1516682641.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:01.740Z,1516682641.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:02.129Z,1516682642.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:02.555Z,1516682642.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:02.962Z,1516682642.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:03.364Z,1516682643.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:03.737Z,1516682643.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:04.137Z,1516682644.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:04.529Z,1516682644.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:04.932Z,1516682644.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:05.331Z,1516682645.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:05.745Z,1516682645.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:06.138Z,1516682646.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:06.537Z,1516682646.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:06.931Z,1516682646.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:07.331Z,1516682647.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:07.745Z,1516682647.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:08.131Z,1516682648.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:08.548Z,1516682648.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:08.945Z,1516682648.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:09.342Z,1516682649.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:09.733Z,1516682649.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:10.138Z,1516682650.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:10.537Z,1516682650.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:10.933Z,1516682650.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:11.345Z,1516682651.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:11.746Z,1516682651.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:12.146Z,1516682652.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:12.546Z,1516682652.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:12.568Z,1516682652.568 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:44:12.934Z,1516682652.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:13.346Z,1516682653.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:13.745Z,1516682653.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:14.134Z,1516682654.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:14.553Z,1516682654.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:14.951Z,1516682654.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:15.343Z,1516682655.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:15.742Z,1516682655.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:16.146Z,1516682656.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:16.541Z,1516682656.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:16.935Z,1516682656.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:17.341Z,1516682657.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:17.754Z,1516682657.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:18.156Z,1516682658.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:18.549Z,1516682658.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:18.940Z,1516682658.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:19.342Z,1516682659.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:19.744Z,1516682659.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:20.145Z,1516682660.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:20.555Z,1516682660.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:20.957Z,1516682660.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:21.355Z,1516682661.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:21.728Z,1516682661.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:22.135Z,1516682662.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:22.532Z,1516682662.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:22.931Z,1516682662.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:23.340Z,1516682663.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:23.738Z,1516682663.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:24.138Z,1516682664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:24.537Z,1516682664.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:24.934Z,1516682664.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:25.334Z,1516682665.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:25.736Z,1516682665.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:26.135Z,1516682666.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:26.541Z,1516682666.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:26.953Z,1516682666.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:27.353Z,1516682667.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:27.741Z,1516682667.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:28.136Z,1516682668.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:28.533Z,1516682668.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:28.942Z,1516682668.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:29.332Z,1516682669.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:29.741Z,1516682669.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:30.150Z,1516682670.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:30.542Z,1516682670.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:30.933Z,1516682670.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:31.341Z,1516682671.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:31.736Z,1516682671.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:32.135Z,1516682672.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:32.541Z,1516682672.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:32.953Z,1516682672.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:33.341Z,1516682673.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:33.733Z,1516682673.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:34.136Z,1516682674.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:34.541Z,1516682674.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:34.934Z,1516682674.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:35.333Z,1516682675.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:35.745Z,1516682675.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:36.153Z,1516682676.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:36.543Z,1516682676.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:36.945Z,1516682676.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:37.345Z,1516682677.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:37.734Z,1516682677.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:40.841Z,1516682680.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:40.975Z,1516682680.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:41.334Z,1516682681.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:41.736Z,1516682681.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:42.125Z,1516682682.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:42.529Z,1516682682.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:42.905Z,1516682682.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:43.312Z,1516682683.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:43.738Z,1516682683.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:44.114Z,1516682684.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:44.114Z,1516682684.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-01-23T04:44:44.114Z,1516682684.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:44:44.116Z,1516682684.116 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:44.116Z,1516682684.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-01-23T04:44:44.117Z,1516682684.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:44:44.118Z,1516682684.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:44.118Z,1516682684.118 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30 2018-01-23T04:44:44.118Z,1516682684.118 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:44:44.156Z,1516682684.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:44:44.156Z,1516682684.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:44:44.157Z,1516682684.157 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:44:44.521Z,1516682684.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:44:44.521Z,1516682684.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-01-23T04:44:44.521Z,1516682684.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:44:44.521Z,1516682684.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-01-23T04:44:44.522Z,1516682684.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:44:44.522Z,1516682684.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30 2018-01-23T04:44:44.905Z,1516682684.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:44:44.906Z,1516682684.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:44:44.906Z,1516682684.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:44:44.906Z,1516682684.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:44:44.907Z,1516682684.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:44:44.907Z,1516682684.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:44:44.908Z,1516682684.908 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:44:44.908Z,1516682684.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:44:44.908Z,1516682684.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:44:45.324Z,1516682685.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:44:45.325Z,1516682685.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:45.709Z,1516682685.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:44:45.710Z,1516682685.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:46.117Z,1516682686.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:44:46.118Z,1516682686.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:46.528Z,1516682686.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:44:46.529Z,1516682686.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:46.928Z,1516682686.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:44:46.929Z,1516682686.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:47.321Z,1516682687.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:44:47.322Z,1516682687.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:47.718Z,1516682687.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:44:47.719Z,1516682687.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:48.115Z,1516682688.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:44:48.116Z,1516682688.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:48.515Z,1516682688.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:44:48.516Z,1516682688.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:48.925Z,1516682688.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:44:48.926Z,1516682688.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:49.315Z,1516682689.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:44:49.316Z,1516682689.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:49.721Z,1516682689.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:44:49.722Z,1516682689.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:50.124Z,1516682690.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:44:50.124Z,1516682690.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:50.521Z,1516682690.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:44:50.522Z,1516682690.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:50.920Z,1516682690.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:44:50.921Z,1516682690.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:51.321Z,1516682691.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:44:51.322Z,1516682691.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:51.712Z,1516682691.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:44:51.712Z,1516682691.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:52.124Z,1516682692.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:44:52.125Z,1516682692.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:52.528Z,1516682692.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:44:52.529Z,1516682692.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:52.932Z,1516682692.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:44:52.932Z,1516682692.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:53.327Z,1516682693.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:44:53.328Z,1516682693.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:53.708Z,1516682693.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:44:53.709Z,1516682693.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:54.108Z,1516682694.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:44:54.109Z,1516682694.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:54.508Z,1516682694.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:44:54.509Z,1516682694.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:54.908Z,1516682694.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:44:54.909Z,1516682694.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:55.308Z,1516682695.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:44:55.309Z,1516682695.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:55.710Z,1516682695.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:44:55.712Z,1516682695.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:56.113Z,1516682696.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:44:56.114Z,1516682696.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:56.516Z,1516682696.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:44:56.517Z,1516682696.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:56.906Z,1516682696.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:44:56.908Z,1516682696.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:57.308Z,1516682697.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:44:57.309Z,1516682697.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:57.708Z,1516682697.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:44:57.709Z,1516682697.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:58.106Z,1516682698.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:44:58.107Z,1516682698.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:58.513Z,1516682698.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:44:58.514Z,1516682698.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:58.913Z,1516682698.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:44:58.914Z,1516682698.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:59.316Z,1516682699.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:44:59.317Z,1516682699.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:44:59.707Z,1516682699.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:44:59.708Z,1516682699.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:00.106Z,1516682700.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:45:00.108Z,1516682700.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:00.506Z,1516682700.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:45:00.507Z,1516682700.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:00.908Z,1516682700.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:45:00.909Z,1516682700.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:01.306Z,1516682701.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:45:01.307Z,1516682701.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:01.716Z,1516682701.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:45:01.717Z,1516682701.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:02.112Z,1516682702.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:45:02.113Z,1516682702.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:02.516Z,1516682702.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:45:02.517Z,1516682702.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:02.906Z,1516682702.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:45:02.907Z,1516682702.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:03.307Z,1516682703.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:45:03.308Z,1516682703.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:03.708Z,1516682703.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:45:03.709Z,1516682703.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:04.106Z,1516682704.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:45:04.107Z,1516682704.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:04.520Z,1516682704.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:04.918Z,1516682704.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:05.326Z,1516682705.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:05.708Z,1516682705.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:06.117Z,1516682706.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:06.513Z,1516682706.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:06.908Z,1516682706.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:07.307Z,1516682707.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:07.721Z,1516682707.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:08.121Z,1516682708.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:08.517Z,1516682708.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:08.909Z,1516682708.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:09.312Z,1516682709.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:09.710Z,1516682709.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:10.109Z,1516682710.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:10.518Z,1516682710.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:10.925Z,1516682710.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:11.325Z,1516682711.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:11.712Z,1516682711.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:12.111Z,1516682712.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:12.517Z,1516682712.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:12.921Z,1516682712.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:13.317Z,1516682713.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:13.710Z,1516682713.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:14.112Z,1516682714.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:14.518Z,1516682714.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:14.922Z,1516682714.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:15.321Z,1516682715.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:15.711Z,1516682715.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:16.109Z,1516682716.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:16.519Z,1516682716.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:16.923Z,1516682716.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:17.325Z,1516682717.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:17.722Z,1516682717.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:18.116Z,1516682718.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:18.530Z,1516682718.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:18.980Z,1516682718.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:19.371Z,1516682719.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:19.741Z,1516682719.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:20.144Z,1516682720.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:20.523Z,1516682720.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:20.967Z,1516682720.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:21.338Z,1516682721.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:21.738Z,1516682721.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:22.128Z,1516682722.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:22.536Z,1516682722.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:22.929Z,1516682722.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:23.334Z,1516682723.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:23.762Z,1516682723.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:24.128Z,1516682724.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:24.521Z,1516682724.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:24.959Z,1516682724.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:25.365Z,1516682725.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:25.723Z,1516682725.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:26.120Z,1516682726.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:26.534Z,1516682726.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:26.942Z,1516682726.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:27.330Z,1516682727.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:27.725Z,1516682727.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:28.133Z,1516682728.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:28.535Z,1516682728.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:28.937Z,1516682728.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:29.341Z,1516682729.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:29.744Z,1516682729.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:30.137Z,1516682730.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:30.591Z,1516682730.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:30.949Z,1516682730.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:31.350Z,1516682731.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:31.738Z,1516682731.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:32.182Z,1516682732.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:32.550Z,1516682732.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:32.957Z,1516682732.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:33.350Z,1516682733.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:33.710Z,1516682733.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:34.115Z,1516682734.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:34.529Z,1516682734.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:34.919Z,1516682734.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:35.328Z,1516682735.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:35.711Z,1516682735.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:36.113Z,1516682736.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:36.518Z,1516682736.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:36.522Z,1516682736.522 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T04:40:36.2Z 2018-01-23T04:45:36.522Z,1516682736.522 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:45:36.522Z,1516682736.522 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:45:36.928Z,1516682736.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:37.433Z,1516682737.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:37.713Z,1516682737.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:40.837Z,1516682740.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:40.912Z,1516682740.912 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0036.lzma 2018-01-23T04:45:40.968Z,1516682740.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:41.338Z,1516682741.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:41.689Z,1516682741.689 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0036.lzma.bak 2018-01-23T04:45:41.689Z,1516682741.689 [DataOverHttps](INFO): SBD MOMSN=7755013 2018-01-23T04:45:41.764Z,1516682741.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:42.378Z,1516682742.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:42.552Z,1516682742.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:45.629Z,1516682745.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:45.768Z,1516682745.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:46.134Z,1516682746.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:46.560Z,1516682746.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:46.934Z,1516682746.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:47.332Z,1516682747.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:50.426Z,1516682750.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:50.503Z,1516682750.503 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180123T031358/Express0037.lzma 2018-01-23T04:45:50.572Z,1516682750.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:50.921Z,1516682750.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:51.257Z,1516682751.257 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0037.lzma.bak 2018-01-23T04:45:51.257Z,1516682751.257 [DataOverHttps](INFO): SBD MOMSN=7755015 2018-01-23T04:45:51.336Z,1516682751.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:51.941Z,1516682751.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:51.964Z,1516682751.964 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:45:51.964Z,1516682751.964 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:45:51.964Z,1516682751.964 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:45:52.113Z,1516682752.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:55.229Z,1516682755.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:55.365Z,1516682755.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:55.717Z,1516682755.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:56.132Z,1516682756.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:56.513Z,1516682756.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:56.916Z,1516682756.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:57.291Z,1516682757.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:57.697Z,1516682757.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:58.093Z,1516682758.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:58.499Z,1516682758.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:58.902Z,1516682758.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:59.326Z,1516682759.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:45:59.704Z,1516682759.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:00.093Z,1516682760.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:00.496Z,1516682760.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:00.895Z,1516682760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:01.304Z,1516682761.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:01.705Z,1516682761.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:02.105Z,1516682762.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:02.510Z,1516682762.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:02.900Z,1516682762.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:03.304Z,1516682763.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:03.701Z,1516682763.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:04.107Z,1516682764.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:04.497Z,1516682764.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:04.917Z,1516682764.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:05.309Z,1516682765.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:05.716Z,1516682765.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:06.109Z,1516682766.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:06.501Z,1516682766.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:06.885Z,1516682766.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:06.898Z,1516682766.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:07.285Z,1516682767.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:07.312Z,1516682767.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:07.692Z,1516682767.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:07.707Z,1516682767.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:08.096Z,1516682768.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:08.110Z,1516682768.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:08.484Z,1516682768.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:08.500Z,1516682768.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:08.875Z,1516682768.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:08.889Z,1516682768.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:09.275Z,1516682769.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:09.289Z,1516682769.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:09.677Z,1516682769.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:09.697Z,1516682769.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:10.076Z,1516682770.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:10.097Z,1516682770.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:10.477Z,1516682770.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:10.491Z,1516682770.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:10.884Z,1516682770.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:10.898Z,1516682770.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:11.288Z,1516682771.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:11.313Z,1516682771.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:11.692Z,1516682771.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:11.724Z,1516682771.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:12.078Z,1516682772.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:12.097Z,1516682772.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:12.478Z,1516682772.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:12.500Z,1516682772.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:12.882Z,1516682772.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:12.900Z,1516682772.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:13.282Z,1516682773.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:13.297Z,1516682773.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:13.696Z,1516682773.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:13.726Z,1516682773.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:14.088Z,1516682774.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:14.101Z,1516682774.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:14.484Z,1516682774.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:14.499Z,1516682774.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:14.880Z,1516682774.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:14.895Z,1516682774.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:15.281Z,1516682775.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:15.296Z,1516682775.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:15.679Z,1516682775.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:15.701Z,1516682775.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:16.080Z,1516682776.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:16.095Z,1516682776.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:16.481Z,1516682776.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:16.502Z,1516682776.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:16.892Z,1516682776.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:16.906Z,1516682776.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:17.288Z,1516682777.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:17.303Z,1516682777.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:17.684Z,1516682777.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:17.698Z,1516682777.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:18.082Z,1516682778.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:18.101Z,1516682778.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:18.482Z,1516682778.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:18.501Z,1516682778.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:18.882Z,1516682778.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:18.895Z,1516682778.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:19.279Z,1516682779.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:19.301Z,1516682779.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:19.684Z,1516682779.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:19.698Z,1516682779.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:20.088Z,1516682780.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:20.102Z,1516682780.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:20.484Z,1516682780.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:20.505Z,1516682780.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:20.881Z,1516682780.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:20.901Z,1516682780.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:21.282Z,1516682781.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:21.296Z,1516682781.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:21.679Z,1516682781.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:21.694Z,1516682781.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:22.080Z,1516682782.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:22.098Z,1516682782.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:22.482Z,1516682782.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:22.496Z,1516682782.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:22.887Z,1516682782.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:22.901Z,1516682782.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:23.288Z,1516682783.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:23.302Z,1516682783.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:23.700Z,1516682783.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:23.730Z,1516682783.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:24.081Z,1516682784.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:24.095Z,1516682784.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:24.480Z,1516682784.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:24.495Z,1516682784.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:24.883Z,1516682784.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:24.896Z,1516682784.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:25.278Z,1516682785.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:25.308Z,1516682785.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:25.691Z,1516682785.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:25.705Z,1516682785.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:26.091Z,1516682786.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:26.109Z,1516682786.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:26.489Z,1516682786.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:26.507Z,1516682786.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:26.876Z,1516682786.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:26.898Z,1516682786.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:27.282Z,1516682787.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:27.301Z,1516682787.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:27.685Z,1516682787.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:27.705Z,1516682787.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:28.080Z,1516682788.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:28.099Z,1516682788.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:28.483Z,1516682788.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:28.497Z,1516682788.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:28.892Z,1516682788.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:28.906Z,1516682788.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:29.295Z,1516682789.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:29.309Z,1516682789.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:29.692Z,1516682789.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:29.706Z,1516682789.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:30.085Z,1516682790.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:30.105Z,1516682790.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:30.480Z,1516682790.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:30.502Z,1516682790.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:30.875Z,1516682790.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:30.910Z,1516682790.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:31.273Z,1516682791.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:31.299Z,1516682791.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:31.688Z,1516682791.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:31.718Z,1516682791.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:32.104Z,1516682792.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:32.118Z,1516682792.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:32.488Z,1516682792.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:32.510Z,1516682792.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:32.874Z,1516682792.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:32.900Z,1516682792.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:33.274Z,1516682793.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:33.309Z,1516682793.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:33.678Z,1516682793.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:33.704Z,1516682793.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:34.075Z,1516682794.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:34.101Z,1516682794.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:34.475Z,1516682794.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:34.505Z,1516682794.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:34.885Z,1516682794.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:34.911Z,1516682794.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:35.288Z,1516682795.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:35.322Z,1516682795.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:35.689Z,1516682795.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:35.725Z,1516682795.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:36.073Z,1516682796.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:36.110Z,1516682796.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:36.473Z,1516682796.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:36.493Z,1516682796.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:36.881Z,1516682796.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:36.918Z,1516682796.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:37.278Z,1516682797.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:37.297Z,1516682797.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:37.688Z,1516682797.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:37.702Z,1516682797.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:38.088Z,1516682798.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:38.102Z,1516682798.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:38.487Z,1516682798.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:38.505Z,1516682798.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:38.885Z,1516682798.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:38.905Z,1516682798.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:39.281Z,1516682799.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:39.300Z,1516682799.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:39.676Z,1516682799.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:39.705Z,1516682799.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:40.080Z,1516682800.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:40.099Z,1516682800.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:40.478Z,1516682800.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:40.504Z,1516682800.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:40.891Z,1516682800.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:40.905Z,1516682800.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:41.292Z,1516682801.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:41.306Z,1516682801.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:41.693Z,1516682801.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:41.707Z,1516682801.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:42.076Z,1516682802.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:42.103Z,1516682802.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:42.476Z,1516682802.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:42.502Z,1516682802.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:42.888Z,1516682802.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:42.902Z,1516682802.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:43.273Z,1516682803.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:43.309Z,1516682803.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:43.701Z,1516682803.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:43.721Z,1516682803.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:44.100Z,1516682804.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:44.121Z,1516682804.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:44.496Z,1516682804.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:44.510Z,1516682804.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:44.874Z,1516682804.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:44.913Z,1516682804.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:45.291Z,1516682805.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:45.305Z,1516682805.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:45.674Z,1516682805.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:45.705Z,1516682805.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:46.080Z,1516682806.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:46.107Z,1516682806.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:46.473Z,1516682806.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:46.509Z,1516682806.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:46.886Z,1516682806.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:46.925Z,1516682806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:47.308Z,1516682807.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:47.322Z,1516682807.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:47.689Z,1516682807.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:47.717Z,1516682807.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:48.073Z,1516682808.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:48.109Z,1516682808.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:48.477Z,1516682808.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:48.521Z,1516682808.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:48.880Z,1516682808.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:48.893Z,1516682808.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:49.281Z,1516682809.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:49.301Z,1516682809.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:49.696Z,1516682809.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:49.730Z,1516682809.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:50.092Z,1516682810.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:50.106Z,1516682810.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:50.500Z,1516682810.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:50.533Z,1516682810.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:50.880Z,1516682810.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:50.894Z,1516682810.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:51.281Z,1516682811.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:51.295Z,1516682811.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:51.680Z,1516682811.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:51.695Z,1516682811.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:52.083Z,1516682812.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:52.098Z,1516682812.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:52.482Z,1516682812.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:52.500Z,1516682812.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:55.592Z,1516682815.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:55.607Z,1516682815.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:55.733Z,1516682815.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:55.748Z,1516682815.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:56.096Z,1516682816.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:56.110Z,1516682816.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:56.490Z,1516682816.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:56.509Z,1516682816.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:56.891Z,1516682816.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:56.905Z,1516682816.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:57.287Z,1516682817.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:57.301Z,1516682817.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:57.700Z,1516682817.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:57.714Z,1516682817.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:58.102Z,1516682818.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:58.121Z,1516682818.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:58.503Z,1516682818.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:58.517Z,1516682818.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:58.893Z,1516682818.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:58.913Z,1516682818.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:59.288Z,1516682819.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:59.306Z,1516682819.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:46:59.690Z,1516682819.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:46:59.708Z,1516682819.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:00.098Z,1516682820.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:00.113Z,1516682820.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:00.497Z,1516682820.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:00.512Z,1516682820.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:00.901Z,1516682820.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:00.915Z,1516682820.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:01.303Z,1516682821.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:01.317Z,1516682821.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:01.707Z,1516682821.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:01.721Z,1516682821.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:02.098Z,1516682822.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:02.112Z,1516682822.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:02.485Z,1516682822.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:02.511Z,1516682822.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:02.882Z,1516682822.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:02.915Z,1516682822.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:03.284Z,1516682823.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:03.313Z,1516682823.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:03.707Z,1516682823.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:03.722Z,1516682823.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:04.110Z,1516682824.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:04.129Z,1516682824.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:04.505Z,1516682824.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:04.519Z,1516682824.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:04.897Z,1516682824.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:04.911Z,1516682824.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:05.301Z,1516682825.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:05.321Z,1516682825.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:05.698Z,1516682825.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:05.712Z,1516682825.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:06.086Z,1516682826.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:06.112Z,1516682826.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:06.483Z,1516682826.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:06.514Z,1516682826.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:06.906Z,1516682826.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:06.919Z,1516682826.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:07.313Z,1516682827.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:07.327Z,1516682827.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:07.692Z,1516682827.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:07.729Z,1516682827.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:08.092Z,1516682828.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:08.127Z,1516682828.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:08.489Z,1516682828.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:08.512Z,1516682828.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:08.890Z,1516682828.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:08.904Z,1516682828.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:09.289Z,1516682829.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:09.303Z,1516682829.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:09.704Z,1516682829.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:09.734Z,1516682829.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:10.100Z,1516682830.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:10.114Z,1516682830.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:10.508Z,1516682830.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:10.541Z,1516682830.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:10.890Z,1516682830.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:10.905Z,1516682830.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:11.289Z,1516682831.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:11.307Z,1516682831.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:11.693Z,1516682831.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:11.712Z,1516682831.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:12.097Z,1516682832.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:12.117Z,1516682832.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:12.496Z,1516682832.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:12.510Z,1516682832.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:12.904Z,1516682832.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:12.924Z,1516682832.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:13.300Z,1516682833.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:13.314Z,1516682833.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:13.703Z,1516682833.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:13.725Z,1516682833.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:14.099Z,1516682834.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:14.113Z,1516682834.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:14.491Z,1516682834.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:14.517Z,1516682834.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:14.884Z,1516682834.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:14.913Z,1516682834.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:15.283Z,1516682835.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:15.319Z,1516682835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:15.708Z,1516682835.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:15.723Z,1516682835.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:16.101Z,1516682836.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:16.128Z,1516682836.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:16.494Z,1516682836.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:16.522Z,1516682836.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:16.885Z,1516682836.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:16.920Z,1516682836.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:17.289Z,1516682837.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:17.324Z,1516682837.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:17.694Z,1516682837.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:17.736Z,1516682837.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:18.101Z,1516682838.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:18.125Z,1516682838.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:18.500Z,1516682838.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:18.525Z,1516682838.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:18.886Z,1516682838.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:18.929Z,1516682838.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:19.286Z,1516682839.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:19.325Z,1516682839.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:19.700Z,1516682839.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:19.711Z,1516682839.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x3952 got:0x16384 2018-01-23T04:47:19.729Z,1516682839.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:20.104Z,1516682840.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:20.118Z,1516682840.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:20.507Z,1516682840.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:20.521Z,1516682840.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:20.882Z,1516682840.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:20.917Z,1516682840.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:21.283Z,1516682841.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:21.311Z,1516682841.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:21.704Z,1516682841.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:21.725Z,1516682841.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:22.103Z,1516682842.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:22.125Z,1516682842.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:22.506Z,1516682842.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:22.524Z,1516682842.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:22.888Z,1516682842.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:22.915Z,1516682842.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:23.284Z,1516682843.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:23.321Z,1516682843.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:23.711Z,1516682843.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:23.732Z,1516682843.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:24.113Z,1516682844.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:24.127Z,1516682844.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:24.508Z,1516682844.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:24.522Z,1516682844.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:24.886Z,1516682844.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:24.919Z,1516682844.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:25.285Z,1516682845.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:25.311Z,1516682845.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:25.697Z,1516682845.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:25.733Z,1516682845.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:26.114Z,1516682846.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:26.128Z,1516682846.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:26.500Z,1516682846.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:26.522Z,1516682846.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:26.884Z,1516682846.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:26.920Z,1516682846.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:27.281Z,1516682847.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:27.325Z,1516682847.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:27.694Z,1516682847.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:27.725Z,1516682847.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:28.097Z,1516682848.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:28.129Z,1516682848.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:28.496Z,1516682848.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:28.525Z,1516682848.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:28.886Z,1516682848.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:28.929Z,1516682848.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:29.281Z,1516682849.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:29.320Z,1516682849.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:29.698Z,1516682849.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:29.725Z,1516682849.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:30.100Z,1516682850.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:30.130Z,1516682850.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:30.492Z,1516682850.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:30.532Z,1516682850.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:30.890Z,1516682850.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:30.912Z,1516682850.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:31.292Z,1516682851.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:31.308Z,1516682851.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:31.693Z,1516682851.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:31.708Z,1516682851.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:32.096Z,1516682852.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:32.131Z,1516682852.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:32.492Z,1516682852.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:32.513Z,1516682852.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:32.889Z,1516682852.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:32.910Z,1516682852.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:33.292Z,1516682853.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:33.317Z,1516682853.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:33.694Z,1516682853.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:33.738Z,1516682853.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:34.096Z,1516682854.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:34.114Z,1516682854.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:34.498Z,1516682854.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:34.516Z,1516682854.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:34.890Z,1516682854.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:34.910Z,1516682854.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:35.284Z,1516682855.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:35.333Z,1516682855.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:35.699Z,1516682855.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:35.717Z,1516682855.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:36.101Z,1516682856.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:36.116Z,1516682856.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:36.501Z,1516682856.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:36.521Z,1516682856.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:36.895Z,1516682856.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:36.925Z,1516682856.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:37.293Z,1516682857.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:37.316Z,1516682857.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:37.700Z,1516682857.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:37.716Z,1516682857.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:38.101Z,1516682858.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:38.115Z,1516682858.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:38.498Z,1516682858.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:38.537Z,1516682858.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:38.884Z,1516682858.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:38.911Z,1516682858.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:39.288Z,1516682859.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:39.320Z,1516682859.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:39.705Z,1516682859.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:39.725Z,1516682859.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:40.107Z,1516682860.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:40.149Z,1516682860.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:40.498Z,1516682860.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:40.541Z,1516682860.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:40.894Z,1516682860.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:40.913Z,1516682860.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:41.280Z,1516682861.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:41.319Z,1516682861.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:41.700Z,1516682861.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:41.714Z,1516682861.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:42.103Z,1516682862.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:42.122Z,1516682862.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:42.509Z,1516682862.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:42.524Z,1516682862.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:42.882Z,1516682862.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:42.917Z,1516682862.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:43.281Z,1516682863.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:43.326Z,1516682863.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:43.704Z,1516682863.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:43.721Z,1516682863.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.106Z,1516682864.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:44.122Z,1516682864.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.498Z,1516682864.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:44.522Z,1516682864.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.882Z,1516682864.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:44.925Z,1516682864.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.925Z,1516682864.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-01-23T04:47:44.925Z,1516682864.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:47:44.928Z,1516682864.928 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.928Z,1516682864.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-01-23T04:47:44.928Z,1516682864.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:47:44.931Z,1516682864.931 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:44.931Z,1516682864.931 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31 2018-01-23T04:47:44.931Z,1516682864.931 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:47:44.973Z,1516682864.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:47:44.974Z,1516682864.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:47:44.974Z,1516682864.974 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:47:45.281Z,1516682865.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:45.320Z,1516682865.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:47:45.320Z,1516682865.320 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-01-23T04:47:45.321Z,1516682865.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:47:45.321Z,1516682865.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-01-23T04:47:45.322Z,1516682865.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:47:45.322Z,1516682865.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31 2018-01-23T04:47:45.700Z,1516682865.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:45.721Z,1516682865.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:47:45.721Z,1516682865.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:47:45.721Z,1516682865.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:47:45.722Z,1516682865.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:47:45.722Z,1516682865.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:47:45.723Z,1516682865.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:47:45.723Z,1516682865.723 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:47:45.724Z,1516682865.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:47:45.724Z,1516682865.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:47:46.105Z,1516682866.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:46.124Z,1516682866.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:47:46.125Z,1516682866.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:46.502Z,1516682866.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:46.524Z,1516682866.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:47:46.525Z,1516682866.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:46.882Z,1516682866.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:46.908Z,1516682866.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:47:46.909Z,1516682866.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:47.281Z,1516682867.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:47.321Z,1516682867.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:47:47.322Z,1516682867.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:47.692Z,1516682867.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:47.731Z,1516682867.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:47:47.732Z,1516682867.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:48.104Z,1516682868.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:48.118Z,1516682868.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:47:48.119Z,1516682868.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:48.500Z,1516682868.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:48.536Z,1516682868.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:47:48.537Z,1516682868.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:48.886Z,1516682868.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:48.921Z,1516682868.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:47:48.923Z,1516682868.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:49.281Z,1516682869.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:49.320Z,1516682869.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:47:49.321Z,1516682869.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:49.692Z,1516682869.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:49.726Z,1516682869.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:47:49.727Z,1516682869.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:50.105Z,1516682870.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:50.119Z,1516682870.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:47:50.120Z,1516682870.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:50.492Z,1516682870.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:50.530Z,1516682870.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:47:50.535Z,1516682870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:50.886Z,1516682870.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:50.916Z,1516682870.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:47:50.917Z,1516682870.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:51.281Z,1516682871.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:51.294Z,1516682871.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:47:51.295Z,1516682871.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:51.696Z,1516682871.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:51.722Z,1516682871.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:47:51.728Z,1516682871.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:52.108Z,1516682872.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:52.135Z,1516682872.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:47:52.136Z,1516682872.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:52.510Z,1516682872.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:52.537Z,1516682872.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:47:52.538Z,1516682872.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:55.593Z,1516682875.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:55.630Z,1516682875.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T04:47:55.631Z,1516682875.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:55.740Z,1516682875.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:55.761Z,1516682875.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:47:55.762Z,1516682875.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:56.090Z,1516682876.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:56.132Z,1516682876.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:47:56.133Z,1516682876.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:56.492Z,1516682876.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:56.506Z,1516682876.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:47:56.507Z,1516682876.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:56.888Z,1516682876.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:56.902Z,1516682876.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:47:56.903Z,1516682876.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:57.274Z,1516682877.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:57.301Z,1516682877.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:47:57.302Z,1516682877.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:57.673Z,1516682877.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:57.717Z,1516682877.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:47:57.718Z,1516682877.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:58.078Z,1516682878.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:58.108Z,1516682878.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:47:58.109Z,1516682878.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:58.479Z,1516682878.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:58.493Z,1516682878.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:47:58.493Z,1516682878.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:58.891Z,1516682878.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:58.926Z,1516682878.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:47:58.929Z,1516682878.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:59.292Z,1516682879.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:59.318Z,1516682879.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:47:59.323Z,1516682879.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:47:59.696Z,1516682879.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:47:59.726Z,1516682879.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:47:59.727Z,1516682879.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:00.084Z,1516682880.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:00.097Z,1516682880.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:48:00.098Z,1516682880.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:00.478Z,1516682880.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:00.496Z,1516682880.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:48:00.497Z,1516682880.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:00.887Z,1516682880.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:00.901Z,1516682880.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:48:00.902Z,1516682880.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:01.285Z,1516682881.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:01.299Z,1516682881.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:48:01.300Z,1516682881.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:01.676Z,1516682881.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:01.708Z,1516682881.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:48:01.709Z,1516682881.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:02.086Z,1516682882.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:02.112Z,1516682882.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:48:02.113Z,1516682882.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:02.498Z,1516682882.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:02.511Z,1516682882.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:48:02.512Z,1516682882.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:02.889Z,1516682882.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:02.915Z,1516682882.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:48:02.916Z,1516682882.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:03.291Z,1516682883.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:03.304Z,1516682883.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:48:03.305Z,1516682883.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:03.673Z,1516682883.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:03.707Z,1516682883.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:48:03.708Z,1516682883.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:04.078Z,1516682884.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:04.112Z,1516682884.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:48:04.113Z,1516682884.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:04.473Z,1516682884.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:04.509Z,1516682884.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:48:04.509Z,1516682884.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:04.898Z,1516682884.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:04.912Z,1516682884.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:48:04.913Z,1516682884.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:05.292Z,1516682885.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:05.323Z,1516682885.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:05.689Z,1516682885.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:05.715Z,1516682885.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:06.073Z,1516682886.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:06.089Z,1516682886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:06.471Z,1516682886.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:06.485Z,1516682886.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:06.885Z,1516682886.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:06.921Z,1516682886.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:07.286Z,1516682887.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:07.329Z,1516682887.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:07.676Z,1516682887.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:07.690Z,1516682887.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:08.096Z,1516682888.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:08.120Z,1516682888.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:08.500Z,1516682888.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:08.525Z,1516682888.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:08.888Z,1516682888.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:08.902Z,1516682888.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:09.278Z,1516682889.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:09.297Z,1516682889.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:09.678Z,1516682889.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:09.703Z,1516682889.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:10.079Z,1516682890.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:10.097Z,1516682890.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:10.479Z,1516682890.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:10.497Z,1516682890.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:10.884Z,1516682890.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:10.898Z,1516682890.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:11.288Z,1516682891.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:11.302Z,1516682891.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:11.700Z,1516682891.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:11.714Z,1516682891.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:12.086Z,1516682892.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:12.100Z,1516682892.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:12.476Z,1516682892.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:12.496Z,1516682892.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:12.876Z,1516682892.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:12.907Z,1516682892.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:13.283Z,1516682893.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:13.296Z,1516682893.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:13.681Z,1516682893.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:13.695Z,1516682893.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:14.086Z,1516682894.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:14.113Z,1516682894.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:14.495Z,1516682894.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:14.509Z,1516682894.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:14.891Z,1516682894.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:14.905Z,1516682894.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:15.276Z,1516682895.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:15.298Z,1516682895.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:15.682Z,1516682895.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:15.700Z,1516682895.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:16.086Z,1516682896.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:16.100Z,1516682896.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:16.476Z,1516682896.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:16.498Z,1516682896.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:16.892Z,1516682896.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:16.906Z,1516682896.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:17.294Z,1516682897.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:17.309Z,1516682897.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:17.691Z,1516682897.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:17.705Z,1516682897.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:18.083Z,1516682898.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:18.097Z,1516682898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:18.476Z,1516682898.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:18.497Z,1516682898.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:18.880Z,1516682898.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:18.898Z,1516682898.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:19.282Z,1516682899.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:19.300Z,1516682899.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:19.685Z,1516682899.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:19.705Z,1516682899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:20.091Z,1516682900.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:20.105Z,1516682900.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:20.495Z,1516682900.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:20.509Z,1516682900.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:20.891Z,1516682900.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:20.905Z,1516682900.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:21.289Z,1516682901.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:21.309Z,1516682901.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:21.682Z,1516682901.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:21.696Z,1516682901.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:22.078Z,1516682902.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:22.099Z,1516682902.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:22.476Z,1516682902.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:22.502Z,1516682902.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:22.892Z,1516682902.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:22.906Z,1516682902.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:23.296Z,1516682903.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:23.317Z,1516682903.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:23.692Z,1516682903.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:23.706Z,1516682903.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:24.073Z,1516682904.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:24.108Z,1516682904.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:24.471Z,1516682904.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:24.501Z,1516682904.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:24.873Z,1516682904.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:24.898Z,1516682904.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:25.274Z,1516682905.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:25.301Z,1516682905.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:25.672Z,1516682905.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:25.697Z,1516682905.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:26.091Z,1516682906.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:26.109Z,1516682906.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:26.496Z,1516682906.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:26.510Z,1516682906.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:26.891Z,1516682906.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:26.909Z,1516682906.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:27.273Z,1516682907.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:27.298Z,1516682907.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:27.672Z,1516682907.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:27.707Z,1516682907.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:28.078Z,1516682908.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:28.103Z,1516682908.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:28.473Z,1516682908.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:28.505Z,1516682908.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:28.891Z,1516682908.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:28.914Z,1516682908.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:29.296Z,1516682909.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:29.310Z,1516682909.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:29.692Z,1516682909.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:29.706Z,1516682909.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:30.073Z,1516682910.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:30.108Z,1516682910.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:30.471Z,1516682910.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:30.493Z,1516682910.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:30.893Z,1516682910.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:30.913Z,1516682910.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:31.282Z,1516682911.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:31.309Z,1516682911.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:31.674Z,1516682911.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:31.705Z,1516682911.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:32.100Z,1516682912.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:32.114Z,1516682912.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:32.496Z,1516682912.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:32.521Z,1516682912.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:32.885Z,1516682912.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:32.920Z,1516682912.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:33.274Z,1516682913.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:33.309Z,1516682913.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:33.673Z,1516682913.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:33.710Z,1516682913.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:34.074Z,1516682914.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:34.101Z,1516682914.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:34.473Z,1516682914.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:34.489Z,1516682914.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:34.893Z,1516682914.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:34.925Z,1516682914.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:35.288Z,1516682915.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:35.323Z,1516682915.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:35.697Z,1516682915.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:35.721Z,1516682915.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:36.085Z,1516682916.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:36.100Z,1516682916.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:36.475Z,1516682916.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:36.489Z,1516682916.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:36.885Z,1516682916.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:36.925Z,1516682916.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:37.282Z,1516682917.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:37.296Z,1516682917.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:37.678Z,1516682917.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:37.705Z,1516682917.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:38.096Z,1516682918.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:38.110Z,1516682918.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:38.492Z,1516682918.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:38.506Z,1516682918.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:38.888Z,1516682918.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:38.909Z,1516682918.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:39.281Z,1516682919.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:39.296Z,1516682919.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:39.684Z,1516682919.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:39.697Z,1516682919.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:40.091Z,1516682920.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:40.105Z,1516682920.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:40.480Z,1516682920.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:40.499Z,1516682920.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:40.890Z,1516682920.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:40.915Z,1516682920.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:41.292Z,1516682921.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:41.306Z,1516682921.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:41.692Z,1516682921.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:41.706Z,1516682921.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:42.082Z,1516682922.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:42.097Z,1516682922.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:42.478Z,1516682922.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:42.504Z,1516682922.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:42.873Z,1516682922.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:42.900Z,1516682922.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:43.274Z,1516682923.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:43.311Z,1516682923.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:43.673Z,1516682923.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:43.709Z,1516682923.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:44.097Z,1516682924.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:44.112Z,1516682924.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:44.497Z,1516682924.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:44.512Z,1516682924.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:44.888Z,1516682924.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:44.920Z,1516682924.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:45.273Z,1516682925.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:45.299Z,1516682925.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:45.674Z,1516682925.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:45.702Z,1516682925.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:46.078Z,1516682926.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:46.104Z,1516682926.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:46.473Z,1516682926.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:46.509Z,1516682926.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:46.897Z,1516682926.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:46.911Z,1516682926.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:47.294Z,1516682927.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:47.315Z,1516682927.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:47.692Z,1516682927.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:47.706Z,1516682927.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:48.073Z,1516682928.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:48.106Z,1516682928.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:48.471Z,1516682928.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:48.493Z,1516682928.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:48.873Z,1516682928.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:48.908Z,1516682928.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:49.274Z,1516682929.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:49.310Z,1516682929.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:49.677Z,1516682929.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:49.708Z,1516682929.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:50.084Z,1516682930.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:50.117Z,1516682930.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:50.497Z,1516682930.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:50.511Z,1516682930.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:50.884Z,1516682930.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:50.917Z,1516682930.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:51.273Z,1516682931.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:51.305Z,1516682931.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:51.681Z,1516682931.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:51.715Z,1516682931.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:52.078Z,1516682932.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:52.108Z,1516682932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:52.477Z,1516682932.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:52.512Z,1516682932.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:52.892Z,1516682932.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:52.915Z,1516682932.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:55.984Z,1516682935.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:56.019Z,1516682936.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:56.119Z,1516682936.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:56.165Z,1516682936.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:56.485Z,1516682936.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:56.520Z,1516682936.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:56.885Z,1516682936.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:56.905Z,1516682936.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:57.278Z,1516682937.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:57.297Z,1516682937.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:57.681Z,1516682937.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:57.695Z,1516682937.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:58.088Z,1516682938.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:58.102Z,1516682938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:58.488Z,1516682938.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:58.502Z,1516682938.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:58.887Z,1516682938.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:58.901Z,1516682938.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:59.285Z,1516682939.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:59.299Z,1516682939.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:48:59.678Z,1516682939.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:48:59.698Z,1516682939.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:00.083Z,1516682940.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:00.097Z,1516682940.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:00.480Z,1516682940.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:00.495Z,1516682940.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:00.886Z,1516682940.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:00.905Z,1516682940.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:01.288Z,1516682941.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:01.302Z,1516682941.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:01.688Z,1516682941.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:01.703Z,1516682941.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:02.081Z,1516682942.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:02.095Z,1516682942.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:02.482Z,1516682942.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:02.496Z,1516682942.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:02.881Z,1516682942.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:02.895Z,1516682942.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:03.280Z,1516682943.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:03.298Z,1516682943.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:03.686Z,1516682943.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:03.700Z,1516682943.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:04.086Z,1516682944.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:04.105Z,1516682944.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:04.492Z,1516682944.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:04.506Z,1516682944.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:04.887Z,1516682944.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:04.902Z,1516682944.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:05.285Z,1516682945.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:05.299Z,1516682945.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:05.681Z,1516682945.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:05.695Z,1516682945.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:06.078Z,1516682946.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:06.100Z,1516682946.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:06.476Z,1516682946.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:06.498Z,1516682946.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:06.892Z,1516682946.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:06.913Z,1516682946.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:07.296Z,1516682947.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:07.317Z,1516682947.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:07.692Z,1516682947.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:07.706Z,1516682947.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:08.073Z,1516682948.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:08.105Z,1516682948.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:08.484Z,1516682948.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:08.505Z,1516682948.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:08.871Z,1516682948.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:08.905Z,1516682948.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:09.290Z,1516682949.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:09.305Z,1516682949.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:09.690Z,1516682949.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:09.705Z,1516682949.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:10.093Z,1516682950.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:10.107Z,1516682950.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:10.496Z,1516682950.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:10.510Z,1516682950.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:10.893Z,1516682950.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:10.913Z,1516682950.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:11.274Z,1516682951.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:11.305Z,1516682951.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:11.678Z,1516682951.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:11.704Z,1516682951.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:12.075Z,1516682952.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:12.115Z,1516682952.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:12.474Z,1516682952.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:12.508Z,1516682952.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:12.888Z,1516682952.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:12.911Z,1516682952.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:13.292Z,1516682953.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:13.329Z,1516682953.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:13.697Z,1516682953.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:13.712Z,1516682953.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:14.073Z,1516682954.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:14.105Z,1516682954.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:14.477Z,1516682954.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:14.510Z,1516682954.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:14.873Z,1516682954.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:14.894Z,1516682954.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:15.282Z,1516682955.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:15.297Z,1516682955.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:15.685Z,1516682955.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:15.722Z,1516682955.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:16.088Z,1516682956.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:16.102Z,1516682956.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:16.488Z,1516682956.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:16.502Z,1516682956.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:16.884Z,1516682956.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:16.899Z,1516682956.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:17.281Z,1516682957.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:17.295Z,1516682957.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:17.680Z,1516682957.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:17.709Z,1516682957.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:18.087Z,1516682958.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:18.102Z,1516682958.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:18.478Z,1516682958.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:18.500Z,1516682958.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:18.888Z,1516682958.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:18.902Z,1516682958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:19.300Z,1516682959.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:19.314Z,1516682959.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:19.692Z,1516682959.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:19.706Z,1516682959.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:20.082Z,1516682960.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:20.097Z,1516682960.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:20.482Z,1516682960.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:20.497Z,1516682960.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:20.886Z,1516682960.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:20.905Z,1516682960.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:21.296Z,1516682961.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:21.310Z,1516682961.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:21.693Z,1516682961.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:21.708Z,1516682961.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:22.078Z,1516682962.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:22.101Z,1516682962.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:22.476Z,1516682962.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:22.509Z,1516682962.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:22.893Z,1516682962.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:22.908Z,1516682962.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:23.296Z,1516682963.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:23.310Z,1516682963.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:23.691Z,1516682963.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:23.706Z,1516682963.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:24.083Z,1516682964.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:24.097Z,1516682964.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:24.476Z,1516682964.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:24.498Z,1516682964.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:24.891Z,1516682964.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:24.905Z,1516682964.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:25.295Z,1516682965.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:25.317Z,1516682965.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:25.695Z,1516682965.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:25.709Z,1516682965.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:26.074Z,1516682966.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:26.105Z,1516682966.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:26.473Z,1516682966.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:26.501Z,1516682966.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:26.896Z,1516682966.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:26.910Z,1516682966.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:27.295Z,1516682967.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:27.317Z,1516682967.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:27.690Z,1516682967.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:27.704Z,1516682967.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:28.074Z,1516682968.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:28.105Z,1516682968.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:28.473Z,1516682968.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:28.505Z,1516682968.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:28.891Z,1516682968.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:28.914Z,1516682968.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:29.300Z,1516682969.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:29.314Z,1516682969.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:29.688Z,1516682969.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:29.709Z,1516682969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:30.074Z,1516682970.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:30.101Z,1516682970.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:30.473Z,1516682970.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:30.505Z,1516682970.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:30.891Z,1516682970.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:30.909Z,1516682970.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:31.301Z,1516682971.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:31.315Z,1516682971.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:31.692Z,1516682971.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:31.706Z,1516682971.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:32.074Z,1516682972.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:32.105Z,1516682972.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:32.473Z,1516682972.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:32.508Z,1516682972.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:32.892Z,1516682972.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:32.906Z,1516682972.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:33.292Z,1516682973.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:33.315Z,1516682973.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:33.693Z,1516682973.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:33.707Z,1516682973.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:34.074Z,1516682974.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:34.105Z,1516682974.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:34.473Z,1516682974.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:34.509Z,1516682974.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:34.884Z,1516682974.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:34.918Z,1516682974.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:35.300Z,1516682975.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:35.314Z,1516682975.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:35.684Z,1516682975.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:35.717Z,1516682975.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:36.074Z,1516682976.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:36.112Z,1516682976.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:36.473Z,1516682976.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:36.509Z,1516682976.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:36.888Z,1516682976.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:36.913Z,1516682976.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:37.288Z,1516682977.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:37.317Z,1516682977.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:37.688Z,1516682977.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:37.713Z,1516682977.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:38.074Z,1516682978.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:38.088Z,1516682978.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:38.478Z,1516682978.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:38.492Z,1516682978.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:38.892Z,1516682978.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:38.915Z,1516682978.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:39.306Z,1516682979.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:39.321Z,1516682979.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:39.692Z,1516682979.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:39.717Z,1516682979.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:40.082Z,1516682980.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:40.097Z,1516682980.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:40.477Z,1516682980.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:40.497Z,1516682980.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:40.888Z,1516682980.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:40.902Z,1516682980.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:41.288Z,1516682981.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:41.302Z,1516682981.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:41.684Z,1516682981.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:41.698Z,1516682981.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:42.082Z,1516682982.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:42.100Z,1516682982.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:42.480Z,1516682982.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:42.494Z,1516682982.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:42.884Z,1516682982.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:42.898Z,1516682982.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:43.288Z,1516682983.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:43.308Z,1516682983.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:43.696Z,1516682983.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:43.710Z,1516682983.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:44.080Z,1516682984.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:44.098Z,1516682984.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:44.482Z,1516682984.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:44.496Z,1516682984.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:44.886Z,1516682984.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:44.905Z,1516682984.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:45.288Z,1516682985.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:45.302Z,1516682985.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:45.692Z,1516682985.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:45.712Z,1516682985.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:46.080Z,1516682986.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:46.099Z,1516682986.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:46.476Z,1516682986.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:46.494Z,1516682986.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:46.893Z,1516682986.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:46.907Z,1516682986.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:47.295Z,1516682987.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:47.309Z,1516682987.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:47.691Z,1516682987.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:47.705Z,1516682987.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:48.083Z,1516682988.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:48.096Z,1516682988.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:48.476Z,1516682988.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:48.498Z,1516682988.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:48.895Z,1516682988.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:48.909Z,1516682988.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:49.295Z,1516682989.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:49.309Z,1516682989.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:49.695Z,1516682989.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:49.709Z,1516682989.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:50.080Z,1516682990.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:50.109Z,1516682990.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:50.487Z,1516682990.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:50.501Z,1516682990.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:50.890Z,1516682990.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:50.905Z,1516682990.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:51.292Z,1516682991.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:51.306Z,1516682991.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:51.695Z,1516682991.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:51.709Z,1516682991.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:52.089Z,1516682992.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:52.115Z,1516682992.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:52.474Z,1516682992.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:52.509Z,1516682992.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:52.890Z,1516682992.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:52.904Z,1516682992.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:53.289Z,1516682993.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:53.304Z,1516682993.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:56.387Z,1516682996.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:56.401Z,1516682996.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:56.525Z,1516682996.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:56.550Z,1516682996.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:56.865Z,1516682996.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:56.879Z,1516682996.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:57.273Z,1516682997.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:57.307Z,1516682997.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:57.650Z,1516682997.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:57.672Z,1516682997.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:58.052Z,1516682998.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:58.072Z,1516682998.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:58.456Z,1516682998.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:58.471Z,1516682998.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:58.849Z,1516682998.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:58.869Z,1516682998.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:59.259Z,1516682999.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:59.274Z,1516682999.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:49:59.660Z,1516682999.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:49:59.674Z,1516682999.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:00.059Z,1516683000.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:00.073Z,1516683000.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:00.449Z,1516683000.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:00.480Z,1516683000.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:00.858Z,1516683000.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:00.872Z,1516683000.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:01.250Z,1516683001.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:01.272Z,1516683001.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:01.652Z,1516683001.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:01.670Z,1516683001.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:02.063Z,1516683002.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:02.085Z,1516683002.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:02.463Z,1516683002.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:02.477Z,1516683002.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:02.863Z,1516683002.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:02.877Z,1516683002.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:03.254Z,1516683003.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:03.268Z,1516683003.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:03.655Z,1516683003.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:03.681Z,1516683003.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:04.052Z,1516683004.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:04.071Z,1516683004.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:04.455Z,1516683004.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:04.469Z,1516683004.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:04.847Z,1516683004.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:04.874Z,1516683004.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:05.267Z,1516683005.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:05.281Z,1516683005.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:05.668Z,1516683005.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:05.682Z,1516683005.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:06.067Z,1516683006.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:06.081Z,1516683006.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:06.445Z,1516683006.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:06.476Z,1516683006.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:06.849Z,1516683006.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:06.876Z,1516683006.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:07.250Z,1516683007.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:07.276Z,1516683007.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:07.646Z,1516683007.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:07.672Z,1516683007.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:08.056Z,1516683008.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:08.089Z,1516683008.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:08.456Z,1516683008.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:08.481Z,1516683008.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:08.856Z,1516683008.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:08.889Z,1516683008.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:09.245Z,1516683009.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:09.279Z,1516683009.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:09.646Z,1516683009.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:09.660Z,1516683009.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:10.045Z,1516683010.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:10.060Z,1516683010.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:10.450Z,1516683010.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:10.464Z,1516683010.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:10.849Z,1516683010.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:10.869Z,1516683010.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:11.260Z,1516683011.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:11.274Z,1516683011.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:11.668Z,1516683011.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:11.698Z,1516683011.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:12.068Z,1516683012.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:12.098Z,1516683012.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:12.450Z,1516683012.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:12.476Z,1516683012.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:12.858Z,1516683012.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:12.872Z,1516683012.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:13.252Z,1516683013.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:13.271Z,1516683013.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:13.651Z,1516683013.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:13.677Z,1516683013.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:14.068Z,1516683014.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:14.082Z,1516683014.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:14.460Z,1516683014.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:14.487Z,1516683014.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:14.868Z,1516683014.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:14.882Z,1516683014.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:15.245Z,1516683015.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:15.273Z,1516683015.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:15.643Z,1516683015.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:15.670Z,1516683015.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:16.049Z,1516683016.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:16.074Z,1516683016.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:16.446Z,1516683016.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:16.482Z,1516683016.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:16.845Z,1516683016.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:16.872Z,1516683016.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:17.268Z,1516683017.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:17.282Z,1516683017.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:17.669Z,1516683017.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:17.683Z,1516683017.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:18.056Z,1516683018.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:18.093Z,1516683018.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:18.449Z,1516683018.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:18.484Z,1516683018.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:18.846Z,1516683018.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:18.888Z,1516683018.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:19.250Z,1516683019.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:19.281Z,1516683019.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:19.649Z,1516683019.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:19.689Z,1516683019.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:20.060Z,1516683020.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:20.091Z,1516683020.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:20.456Z,1516683020.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:20.470Z,1516683020.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:20.860Z,1516683020.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:20.874Z,1516683020.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:21.255Z,1516683021.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:21.273Z,1516683021.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:21.650Z,1516683021.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:21.668Z,1516683021.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:22.054Z,1516683022.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:22.073Z,1516683022.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:22.453Z,1516683022.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:22.475Z,1516683022.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:22.848Z,1516683022.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:22.868Z,1516683022.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:23.258Z,1516683023.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:23.277Z,1516683023.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:23.660Z,1516683023.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:23.674Z,1516683023.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:24.059Z,1516683024.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:24.077Z,1516683024.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:24.453Z,1516683024.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:24.473Z,1516683024.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:24.855Z,1516683024.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:24.869Z,1516683024.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:25.252Z,1516683025.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:25.271Z,1516683025.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:25.649Z,1516683025.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:25.670Z,1516683025.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:26.060Z,1516683026.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:26.075Z,1516683026.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:26.460Z,1516683026.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:26.474Z,1516683026.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:26.872Z,1516683026.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:26.886Z,1516683026.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:27.259Z,1516683027.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:27.273Z,1516683027.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:27.654Z,1516683027.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:27.675Z,1516683027.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:28.061Z,1516683028.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:28.076Z,1516683028.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:28.457Z,1516683028.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:28.477Z,1516683028.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:28.852Z,1516683028.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:28.872Z,1516683028.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:29.258Z,1516683029.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:29.285Z,1516683029.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:29.670Z,1516683029.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:29.689Z,1516683029.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:30.068Z,1516683030.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:30.082Z,1516683030.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:30.454Z,1516683030.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:30.472Z,1516683030.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:30.848Z,1516683030.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:30.888Z,1516683030.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:31.246Z,1516683031.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:31.273Z,1516683031.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:31.645Z,1516683031.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:31.677Z,1516683031.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:32.061Z,1516683032.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:32.089Z,1516683032.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:32.469Z,1516683032.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:32.483Z,1516683032.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:32.860Z,1516683032.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:32.887Z,1516683032.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:33.246Z,1516683033.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:33.281Z,1516683033.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:33.650Z,1516683033.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:33.681Z,1516683033.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:34.053Z,1516683034.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:34.085Z,1516683034.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:34.447Z,1516683034.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:34.473Z,1516683034.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:34.850Z,1516683034.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:34.880Z,1516683034.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:35.257Z,1516683035.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:35.293Z,1516683035.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:35.668Z,1516683035.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:35.698Z,1516683035.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:36.068Z,1516683036.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:36.097Z,1516683036.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:36.458Z,1516683036.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:36.488Z,1516683036.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:36.850Z,1516683036.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:36.865Z,1516683036.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:37.252Z,1516683037.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:37.274Z,1516683037.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:37.652Z,1516683037.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:37.674Z,1516683037.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:38.057Z,1516683038.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:38.072Z,1516683038.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:38.461Z,1516683038.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:38.476Z,1516683038.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:38.857Z,1516683038.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:38.871Z,1516683038.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:39.253Z,1516683039.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:39.267Z,1516683039.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:39.652Z,1516683039.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:39.667Z,1516683039.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:40.052Z,1516683040.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:40.067Z,1516683040.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:40.454Z,1516683040.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:40.473Z,1516683040.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:40.854Z,1516683040.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:40.869Z,1516683040.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:41.256Z,1516683041.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:41.270Z,1516683041.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:41.660Z,1516683041.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:41.681Z,1516683041.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:42.056Z,1516683042.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:42.071Z,1516683042.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:42.452Z,1516683042.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:42.467Z,1516683042.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:42.854Z,1516683042.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:42.868Z,1516683042.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:43.253Z,1516683043.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:43.267Z,1516683043.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:43.651Z,1516683043.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:43.670Z,1516683043.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:44.064Z,1516683044.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:44.078Z,1516683044.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:44.462Z,1516683044.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:44.481Z,1516683044.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:44.863Z,1516683044.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:44.877Z,1516683044.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:45.254Z,1516683045.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:45.268Z,1516683045.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:45.653Z,1516683045.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:45.672Z,1516683045.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:46.048Z,1516683046.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:46.070Z,1516683046.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:46.075Z,1516683046.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-01-23T04:50:46.075Z,1516683046.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:50:46.077Z,1516683046.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:46.077Z,1516683046.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-01-23T04:50:46.077Z,1516683046.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:50:46.083Z,1516683046.083 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:46.083Z,1516683046.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32 2018-01-23T04:50:46.083Z,1516683046.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:50:46.107Z,1516683046.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:50:46.107Z,1516683046.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:50:46.108Z,1516683046.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:50:46.454Z,1516683046.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:46.482Z,1516683046.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:50:46.483Z,1516683046.483 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-01-23T04:50:46.483Z,1516683046.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:50:46.483Z,1516683046.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-01-23T04:50:46.484Z,1516683046.484 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:50:46.484Z,1516683046.484 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32 2018-01-23T04:50:46.845Z,1516683046.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:46.869Z,1516683046.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:50:46.870Z,1516683046.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:50:46.870Z,1516683046.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:50:46.871Z,1516683046.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:50:46.871Z,1516683046.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:50:46.871Z,1516683046.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:50:46.872Z,1516683046.872 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:50:46.872Z,1516683046.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:50:46.873Z,1516683046.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:50:47.263Z,1516683047.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:47.293Z,1516683047.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:50:47.294Z,1516683047.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:47.676Z,1516683047.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:47.696Z,1516683047.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:50:47.697Z,1516683047.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:48.068Z,1516683048.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:48.082Z,1516683048.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:50:48.083Z,1516683048.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:48.445Z,1516683048.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:48.471Z,1516683048.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:50:48.472Z,1516683048.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:48.845Z,1516683048.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:48.859Z,1516683048.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:50:48.860Z,1516683048.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:49.250Z,1516683049.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:49.264Z,1516683049.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:50:49.265Z,1516683049.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:49.654Z,1516683049.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:49.667Z,1516683049.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:50:49.668Z,1516683049.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:50.063Z,1516683050.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:50.099Z,1516683050.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:50:50.100Z,1516683050.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:50.468Z,1516683050.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:50.491Z,1516683050.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:50:50.492Z,1516683050.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:50.868Z,1516683050.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:50.891Z,1516683050.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:50:50.892Z,1516683050.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:51.257Z,1516683051.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:51.271Z,1516683051.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:50:51.272Z,1516683051.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:51.650Z,1516683051.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:51.668Z,1516683051.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:50:51.669Z,1516683051.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:52.050Z,1516683052.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:52.068Z,1516683052.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:50:52.069Z,1516683052.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:52.454Z,1516683052.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:52.468Z,1516683052.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:50:52.469Z,1516683052.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:52.472Z,1516683052.471 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T04:50:52.472Z,1516683052.472 [Default:CheckIn:C.Wait] Stopped 2018-01-23T04:50:52.472Z,1516683052.472 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T04:50:52.472Z,1516683052.472 [Default:CheckIn:D] Running Loop=1 2018-01-23T04:50:52.854Z,1516683052.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:52.868Z,1516683052.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:50:52.869Z,1516683052.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:52.872Z,1516683052.872 [Default:CheckIn:D] Stopped 2018-01-23T04:50:52.873Z,1516683052.873 [Default:CheckIn:E] Running Loop=1 2018-01-23T04:50:53.256Z,1516683053.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:53.270Z,1516683053.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:50:53.271Z,1516683053.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:53.274Z,1516683053.274 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.013542 min 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn:E] Stopped 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn] Stopped 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn](INFO): Running loop #10 2018-01-23T04:50:53.275Z,1516683053.275 [Default:CheckIn] Running Loop=10 2018-01-23T04:50:53.276Z,1516683053.276 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T04:50:53.276Z,1516683053.276 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T04:50:53.661Z,1516683053.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:53.680Z,1516683053.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:50:53.681Z,1516683053.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:56.768Z,1516683056.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:56.782Z,1516683056.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T04:50:56.783Z,1516683056.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:56.884Z,1516683056.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:56.910Z,1516683056.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:50:56.915Z,1516683056.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:57.271Z,1516683057.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:57.285Z,1516683057.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:50:57.286Z,1516683057.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:57.669Z,1516683057.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:57.688Z,1516683057.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:50:57.689Z,1516683057.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:58.071Z,1516683058.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:58.085Z,1516683058.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:50:58.085Z,1516683058.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:58.471Z,1516683058.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:58.484Z,1516683058.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:50:58.485Z,1516683058.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:58.872Z,1516683058.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:58.886Z,1516683058.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:50:58.887Z,1516683058.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:59.269Z,1516683059.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:59.283Z,1516683059.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:50:59.284Z,1516683059.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:50:59.662Z,1516683059.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:50:59.680Z,1516683059.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:50:59.681Z,1516683059.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:00.066Z,1516683060.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:00.079Z,1516683060.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:51:00.080Z,1516683060.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:00.468Z,1516683060.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:00.488Z,1516683060.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:51:00.489Z,1516683060.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:00.869Z,1516683060.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:00.882Z,1516683060.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:51:00.883Z,1516683060.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:01.269Z,1516683061.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:01.295Z,1516683061.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:51:01.296Z,1516683061.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:01.676Z,1516683061.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:01.689Z,1516683061.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:51:01.690Z,1516683061.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:02.076Z,1516683062.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:02.096Z,1516683062.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:51:02.097Z,1516683062.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:02.469Z,1516683062.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:02.488Z,1516683062.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:51:02.489Z,1516683062.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:02.853Z,1516683062.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:02.884Z,1516683062.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:51:02.885Z,1516683062.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:03.254Z,1516683063.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:03.289Z,1516683063.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:51:03.290Z,1516683063.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:03.664Z,1516683063.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:03.679Z,1516683063.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:51:03.680Z,1516683063.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:04.080Z,1516683064.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:04.094Z,1516683064.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:51:04.095Z,1516683064.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:04.476Z,1516683064.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:04.490Z,1516683064.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:51:04.491Z,1516683064.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:04.872Z,1516683064.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:04.886Z,1516683064.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:51:04.887Z,1516683064.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:05.264Z,1516683065.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:05.282Z,1516683065.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:51:05.283Z,1516683065.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:05.666Z,1516683065.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:05.684Z,1516683065.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:51:05.685Z,1516683065.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:06.069Z,1516683066.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:06.089Z,1516683066.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:06.454Z,1516683066.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:06.481Z,1516683066.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:06.860Z,1516683066.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:06.886Z,1516683066.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:07.280Z,1516683067.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:07.294Z,1516683067.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:07.684Z,1516683067.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:07.698Z,1516683067.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:08.074Z,1516683068.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:08.092Z,1516683068.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:08.473Z,1516683068.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:08.487Z,1516683068.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:08.861Z,1516683068.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:08.887Z,1516683068.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:09.262Z,1516683069.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:09.289Z,1516683069.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:09.657Z,1516683069.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:09.683Z,1516683069.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:10.069Z,1516683070.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:10.091Z,1516683070.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:10.477Z,1516683070.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:10.491Z,1516683070.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:10.880Z,1516683070.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:10.894Z,1516683070.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:11.253Z,1516683071.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:11.289Z,1516683071.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:11.656Z,1516683071.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:11.690Z,1516683071.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:12.056Z,1516683072.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:12.086Z,1516683072.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:12.462Z,1516683072.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:12.489Z,1516683072.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:12.892Z,1516683072.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:13.301Z,1516683073.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:13.705Z,1516683073.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:14.081Z,1516683074.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:14.096Z,1516683074.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:14.456Z,1516683074.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:14.489Z,1516683074.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:14.855Z,1516683074.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:14.891Z,1516683074.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:15.258Z,1516683075.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:15.271Z,1516683075.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:15.657Z,1516683075.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:15.677Z,1516683075.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:16.076Z,1516683076.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:16.100Z,1516683076.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:16.480Z,1516683076.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:16.506Z,1516683076.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:16.869Z,1516683076.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:16.903Z,1516683076.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:17.266Z,1516683077.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:17.281Z,1516683077.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:17.665Z,1516683077.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:17.680Z,1516683077.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:18.074Z,1516683078.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:18.112Z,1516683078.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:18.476Z,1516683078.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:18.505Z,1516683078.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:18.880Z,1516683078.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:18.906Z,1516683078.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:19.262Z,1516683079.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:19.277Z,1516683079.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:19.661Z,1516683079.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:19.685Z,1516683079.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:20.070Z,1516683080.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:20.084Z,1516683080.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:20.462Z,1516683080.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:20.492Z,1516683080.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:20.869Z,1516683080.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:20.883Z,1516683080.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:21.275Z,1516683081.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:21.288Z,1516683081.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:21.673Z,1516683081.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:21.693Z,1516683081.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:22.076Z,1516683082.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:22.097Z,1516683082.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:22.468Z,1516683082.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:22.481Z,1516683082.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:22.851Z,1516683082.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:22.900Z,1516683082.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:23.269Z,1516683083.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:23.276Z,1516683083.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x21338 got:0x16413 2018-01-23T04:51:23.304Z,1516683083.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:23.656Z,1516683083.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:23.688Z,1516683083.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:24.079Z,1516683084.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:24.094Z,1516683084.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:24.474Z,1516683084.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:24.497Z,1516683084.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:24.878Z,1516683084.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:24.892Z,1516683084.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:25.257Z,1516683085.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:25.291Z,1516683085.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:25.654Z,1516683085.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:25.692Z,1516683085.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:26.068Z,1516683086.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:26.098Z,1516683086.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:26.466Z,1516683086.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:26.497Z,1516683086.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:26.870Z,1516683086.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:26.884Z,1516683086.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:27.265Z,1516683087.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:27.280Z,1516683087.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:27.662Z,1516683087.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:27.705Z,1516683087.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:28.066Z,1516683088.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:28.082Z,1516683088.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:28.470Z,1516683088.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:28.484Z,1516683088.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:28.865Z,1516683088.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:28.885Z,1516683088.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:29.260Z,1516683089.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:29.306Z,1516683089.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:29.659Z,1516683089.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:29.687Z,1516683089.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:30.073Z,1516683090.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:30.093Z,1516683090.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:30.474Z,1516683090.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:30.493Z,1516683090.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:30.871Z,1516683090.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:30.897Z,1516683090.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:31.266Z,1516683091.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:31.276Z,1516683091.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x50069 got:0x6210 2018-01-23T04:51:31.317Z,1516683091.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:31.661Z,1516683091.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:31.673Z,1516683091.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x22262 got:0x32768 2018-01-23T04:51:31.693Z,1516683091.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:32.075Z,1516683092.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:32.089Z,1516683092.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:32.468Z,1516683092.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:32.510Z,1516683092.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:32.873Z,1516683092.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:32.889Z,1516683092.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:33.264Z,1516683093.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:33.280Z,1516683093.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:33.657Z,1516683093.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:33.680Z,1516683093.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:34.071Z,1516683094.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:34.110Z,1516683094.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:34.471Z,1516683094.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:34.492Z,1516683094.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:34.874Z,1516683094.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:34.888Z,1516683094.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:35.260Z,1516683095.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:35.282Z,1516683095.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:35.663Z,1516683095.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:35.698Z,1516683095.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:36.072Z,1516683096.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:36.090Z,1516683096.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:36.473Z,1516683096.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:36.493Z,1516683096.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:36.875Z,1516683096.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:36.889Z,1516683096.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:37.260Z,1516683097.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:37.310Z,1516683097.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:37.661Z,1516683097.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:37.684Z,1516683097.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:38.074Z,1516683098.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:38.089Z,1516683098.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:38.473Z,1516683098.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:38.495Z,1516683098.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:38.872Z,1516683098.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:38.905Z,1516683098.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:39.258Z,1516683099.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:39.289Z,1516683099.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:39.652Z,1516683099.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:39.693Z,1516683099.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:40.079Z,1516683100.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:40.093Z,1516683100.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:40.477Z,1516683100.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:40.504Z,1516683100.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:40.868Z,1516683100.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:40.894Z,1516683100.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:41.254Z,1516683101.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:51:41.290Z,1516683101.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:41.691Z,1516683101.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:42.090Z,1516683102.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:42.494Z,1516683102.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:42.901Z,1516683102.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:43.293Z,1516683103.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:43.691Z,1516683103.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:44.099Z,1516683104.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:44.505Z,1516683104.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:44.897Z,1516683104.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:45.295Z,1516683105.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:45.671Z,1516683105.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:46.101Z,1516683106.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:46.506Z,1516683106.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:46.901Z,1516683106.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:47.280Z,1516683107.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:47.677Z,1516683107.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:48.106Z,1516683108.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:48.486Z,1516683108.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:48.912Z,1516683108.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:49.285Z,1516683109.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:49.680Z,1516683109.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:50.082Z,1516683110.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:50.483Z,1516683110.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:50.882Z,1516683110.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:51.284Z,1516683111.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:51.677Z,1516683111.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:52.082Z,1516683112.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:52.482Z,1516683112.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:52.893Z,1516683112.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:53.280Z,1516683113.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:53.682Z,1516683113.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:56.768Z,1516683116.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:56.918Z,1516683116.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:57.245Z,1516683117.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:57.650Z,1516683117.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:58.030Z,1516683118.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:58.440Z,1516683118.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:58.831Z,1516683118.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:59.241Z,1516683119.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:51:59.645Z,1516683119.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:00.041Z,1516683120.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:00.429Z,1516683120.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:00.843Z,1516683120.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:01.232Z,1516683121.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:01.632Z,1516683121.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:02.032Z,1516683122.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:02.441Z,1516683122.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:02.845Z,1516683122.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:03.249Z,1516683123.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:03.636Z,1516683123.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:04.031Z,1516683124.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:04.442Z,1516683124.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:04.832Z,1516683124.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:05.241Z,1516683125.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:05.645Z,1516683125.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:06.042Z,1516683126.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:06.436Z,1516683126.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:06.832Z,1516683126.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:07.236Z,1516683127.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:07.631Z,1516683127.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:08.032Z,1516683128.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:08.442Z,1516683128.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:08.841Z,1516683128.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:09.241Z,1516683129.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:09.636Z,1516683129.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:10.031Z,1516683130.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:10.442Z,1516683130.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:10.835Z,1516683130.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:11.245Z,1516683131.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:11.649Z,1516683131.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:12.042Z,1516683132.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:12.433Z,1516683132.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:12.845Z,1516683132.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:13.232Z,1516683133.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:13.632Z,1516683133.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:14.033Z,1516683134.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:14.392Z,1516683134.392 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T04:52:14.392Z,1516683134.392 [NAL9602] Data Fault, FailCount= 4 2018-01-23T04:52:14.392Z,1516683134.392 [NAL9602](ERROR): Data Fault 2018-01-23T04:52:14.452Z,1516683134.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:14.476Z,1516683134.476 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T04:52:14.792Z,1516683134.792 [NAL9602](INFO): Powering down 2018-01-23T04:52:14.845Z,1516683134.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:15.237Z,1516683135.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:15.634Z,1516683135.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:15.647Z,1516683135.647 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T04:52:15.647Z,1516683135.647 [NAL9602] No Fault, FailCount= 4 2018-01-23T04:52:16.033Z,1516683136.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:16.440Z,1516683136.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:16.834Z,1516683136.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:17.232Z,1516683137.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:17.640Z,1516683137.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:18.040Z,1516683138.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:18.434Z,1516683138.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:18.839Z,1516683138.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:19.242Z,1516683139.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:19.641Z,1516683139.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:20.041Z,1516683140.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:20.434Z,1516683140.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:20.839Z,1516683140.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:21.236Z,1516683141.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:21.609Z,1516683141.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:52:21.646Z,1516683141.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:22.006Z,1516683142.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:52:22.029Z,1516683142.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:22.409Z,1516683142.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T04:52:22.445Z,1516683142.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:22.844Z,1516683142.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:23.247Z,1516683143.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:23.625Z,1516683143.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:24.023Z,1516683144.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:24.424Z,1516683144.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:24.854Z,1516683144.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:25.229Z,1516683145.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:25.626Z,1516683145.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:26.053Z,1516683146.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:26.459Z,1516683146.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:26.825Z,1516683146.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:27.229Z,1516683147.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:27.630Z,1516683147.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:28.029Z,1516683148.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:28.431Z,1516683148.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:28.830Z,1516683148.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:29.231Z,1516683149.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:29.657Z,1516683149.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:30.031Z,1516683150.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:30.428Z,1516683150.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:30.830Z,1516683150.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:31.230Z,1516683151.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:31.629Z,1516683151.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:32.061Z,1516683152.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:32.432Z,1516683152.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:32.830Z,1516683152.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:33.231Z,1516683153.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:33.630Z,1516683153.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:34.028Z,1516683154.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:34.437Z,1516683154.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:34.830Z,1516683154.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:35.232Z,1516683155.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:35.629Z,1516683155.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:36.030Z,1516683156.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:36.428Z,1516683156.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:36.836Z,1516683156.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:37.229Z,1516683157.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:37.628Z,1516683157.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:38.029Z,1516683158.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:38.429Z,1516683158.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:38.830Z,1516683158.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:39.230Z,1516683159.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:39.630Z,1516683159.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:40.028Z,1516683160.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:40.430Z,1516683160.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:40.831Z,1516683160.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:41.230Z,1516683161.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:41.635Z,1516683161.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:42.033Z,1516683162.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:42.428Z,1516683162.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:42.830Z,1516683162.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:43.231Z,1516683163.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:43.628Z,1516683163.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:44.030Z,1516683164.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:44.430Z,1516683164.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:44.828Z,1516683164.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:45.192Z,1516683165.192 [NAL9602](INFO): Powering up NAL9602 2018-01-23T04:52:45.244Z,1516683165.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:45.630Z,1516683165.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:46.028Z,1516683166.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:46.437Z,1516683166.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:46.849Z,1516683166.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:47.232Z,1516683167.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:47.636Z,1516683167.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:48.038Z,1516683168.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:48.436Z,1516683168.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:48.836Z,1516683168.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:49.238Z,1516683169.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:49.639Z,1516683169.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:50.040Z,1516683170.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:50.434Z,1516683170.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:50.828Z,1516683170.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:51.240Z,1516683171.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:51.638Z,1516683171.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:52.028Z,1516683172.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:52.442Z,1516683172.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:52.845Z,1516683172.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:53.235Z,1516683173.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:53.622Z,1516683173.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:54.029Z,1516683174.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:57.120Z,1516683177.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:57.281Z,1516683177.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:57.568Z,1516683177.568 [NAL9602](INFO): NAL9602 initialized 2018-01-23T04:52:57.617Z,1516683177.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:58.017Z,1516683178.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:58.415Z,1516683178.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:58.820Z,1516683178.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:59.219Z,1516683179.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:52:59.601Z,1516683179.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:00.017Z,1516683180.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:00.424Z,1516683180.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:00.794Z,1516683180.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:01.223Z,1516683181.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:01.630Z,1516683181.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:02.031Z,1516683182.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:02.405Z,1516683182.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:02.802Z,1516683182.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:03.213Z,1516683183.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:03.605Z,1516683183.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:04.010Z,1516683184.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:04.406Z,1516683184.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:04.806Z,1516683184.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:05.214Z,1516683185.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:05.609Z,1516683185.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:06.010Z,1516683186.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:06.410Z,1516683186.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:06.804Z,1516683186.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:07.209Z,1516683187.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:07.616Z,1516683187.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:08.025Z,1516683188.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:08.405Z,1516683188.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:08.808Z,1516683188.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:09.213Z,1516683189.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:09.617Z,1516683189.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:10.015Z,1516683190.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:10.418Z,1516683190.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:10.818Z,1516683190.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:11.208Z,1516683191.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:11.601Z,1516683191.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:12.009Z,1516683192.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:12.408Z,1516683192.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:12.811Z,1516683192.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:13.225Z,1516683193.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:13.668Z,1516683193.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:14.014Z,1516683194.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:14.409Z,1516683194.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:14.807Z,1516683194.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:15.209Z,1516683195.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:15.609Z,1516683195.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:16.025Z,1516683196.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:16.415Z,1516683196.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:16.824Z,1516683196.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:17.216Z,1516683197.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:17.605Z,1516683197.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:18.013Z,1516683198.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:18.413Z,1516683198.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:18.801Z,1516683198.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:19.221Z,1516683199.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:19.629Z,1516683199.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:20.023Z,1516683200.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:20.413Z,1516683200.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:20.823Z,1516683200.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:21.196Z,1516683201.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:21.601Z,1516683201.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:22.027Z,1516683202.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:22.406Z,1516683202.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:22.832Z,1516683202.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:23.207Z,1516683203.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:23.601Z,1516683203.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:24.005Z,1516683204.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:24.403Z,1516683204.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:24.800Z,1516683204.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:25.210Z,1516683205.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:25.635Z,1516683205.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:26.013Z,1516683206.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:26.409Z,1516683206.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:26.805Z,1516683206.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:27.205Z,1516683207.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:27.612Z,1516683207.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:28.038Z,1516683208.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:28.406Z,1516683208.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:28.806Z,1516683208.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:29.204Z,1516683209.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:29.601Z,1516683209.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:30.005Z,1516683210.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:30.412Z,1516683210.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:30.802Z,1516683210.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:31.213Z,1516683211.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:31.613Z,1516683211.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:32.018Z,1516683212.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:32.407Z,1516683212.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:32.809Z,1516683212.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:33.214Z,1516683213.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:33.605Z,1516683213.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:34.027Z,1516683214.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:34.417Z,1516683214.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:34.818Z,1516683214.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:35.216Z,1516683215.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:35.615Z,1516683215.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:36.015Z,1516683216.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:36.416Z,1516683216.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:36.815Z,1516683216.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:37.223Z,1516683217.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:37.623Z,1516683217.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:38.019Z,1516683218.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:38.413Z,1516683218.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:38.813Z,1516683218.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:39.197Z,1516683219.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:39.601Z,1516683219.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:40.027Z,1516683220.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:40.425Z,1516683220.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:40.833Z,1516683220.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:41.202Z,1516683221.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:41.605Z,1516683221.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:42.006Z,1516683222.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:42.405Z,1516683222.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:42.809Z,1516683222.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:43.233Z,1516683223.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:43.623Z,1516683223.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:44.013Z,1516683224.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:44.406Z,1516683224.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:44.809Z,1516683224.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:45.203Z,1516683225.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:45.603Z,1516683225.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:46.006Z,1516683226.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:46.439Z,1516683226.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:46.806Z,1516683226.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:47.204Z,1516683227.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:47.204Z,1516683227.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-01-23T04:53:47.204Z,1516683227.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:53:47.206Z,1516683227.206 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:47.206Z,1516683227.206 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-01-23T04:53:47.206Z,1516683227.206 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:53:47.208Z,1516683227.208 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:47.208Z,1516683227.208 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33 2018-01-23T04:53:47.208Z,1516683227.208 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:53:47.244Z,1516683227.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:53:47.244Z,1516683227.244 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:53:47.244Z,1516683227.244 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:53:47.629Z,1516683227.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:53:47.629Z,1516683227.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-01-23T04:53:47.630Z,1516683227.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:53:47.630Z,1516683227.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-01-23T04:53:47.635Z,1516683227.635 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:53:47.635Z,1516683227.635 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33 2018-01-23T04:53:48.004Z,1516683228.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:53:48.005Z,1516683228.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:53:48.005Z,1516683228.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:53:48.006Z,1516683228.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:53:48.006Z,1516683228.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:53:48.006Z,1516683228.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:53:48.007Z,1516683228.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:53:48.007Z,1516683228.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:53:48.008Z,1516683228.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:53:48.420Z,1516683228.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:53:48.421Z,1516683228.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:48.805Z,1516683228.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:53:48.806Z,1516683228.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:49.225Z,1516683229.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:53:49.226Z,1516683229.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:49.626Z,1516683229.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:53:49.627Z,1516683229.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:50.027Z,1516683230.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:53:50.028Z,1516683230.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:50.409Z,1516683230.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:53:50.410Z,1516683230.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:50.812Z,1516683230.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:53:50.813Z,1516683230.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:51.209Z,1516683231.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:53:51.210Z,1516683231.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:51.615Z,1516683231.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:53:51.616Z,1516683231.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:52.022Z,1516683232.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:53:52.023Z,1516683232.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:52.421Z,1516683232.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:53:52.422Z,1516683232.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:52.815Z,1516683232.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:53:52.816Z,1516683232.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:53.207Z,1516683233.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:53:53.207Z,1516683233.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:53.608Z,1516683233.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:53:53.609Z,1516683233.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:54.008Z,1516683234.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:53:54.009Z,1516683234.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:54.408Z,1516683234.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:53:54.409Z,1516683234.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:57.509Z,1516683237.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T04:53:57.510Z,1516683237.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:57.656Z,1516683237.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T04:53:57.657Z,1516683237.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:57.982Z,1516683237.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:53:57.983Z,1516683237.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:58.402Z,1516683238.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:53:58.403Z,1516683238.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:58.771Z,1516683238.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:53:58.772Z,1516683238.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:59.175Z,1516683239.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:53:59.176Z,1516683239.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:59.574Z,1516683239.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:53:59.575Z,1516683239.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:53:59.978Z,1516683239.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:53:59.979Z,1516683239.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:00.381Z,1516683240.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:54:00.382Z,1516683240.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:00.778Z,1516683240.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:54:00.779Z,1516683240.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:01.174Z,1516683241.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:54:01.175Z,1516683241.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:01.575Z,1516683241.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:54:01.576Z,1516683241.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:01.980Z,1516683241.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:54:01.981Z,1516683241.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:02.405Z,1516683242.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:54:02.406Z,1516683242.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:02.778Z,1516683242.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:54:02.779Z,1516683242.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:03.179Z,1516683243.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:54:03.180Z,1516683243.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:03.576Z,1516683243.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:54:03.577Z,1516683243.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:03.978Z,1516683243.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:54:03.979Z,1516683243.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:04.382Z,1516683244.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:54:04.383Z,1516683244.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:04.778Z,1516683244.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:54:04.779Z,1516683244.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:05.175Z,1516683245.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:54:05.176Z,1516683245.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:05.575Z,1516683245.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:54:05.576Z,1516683245.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:05.990Z,1516683245.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:54:06.011Z,1516683246.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:06.393Z,1516683246.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:54:06.415Z,1516683246.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:06.792Z,1516683246.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:54:06.793Z,1516683246.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:07.178Z,1516683247.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T04:54:07.183Z,1516683247.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:07.585Z,1516683247.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:07.994Z,1516683247.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:08.390Z,1516683248.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:08.792Z,1516683248.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:09.188Z,1516683249.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:09.585Z,1516683249.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:09.989Z,1516683249.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:10.403Z,1516683250.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:10.793Z,1516683250.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:11.189Z,1516683251.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:11.584Z,1516683251.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:11.989Z,1516683251.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:12.399Z,1516683252.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:12.799Z,1516683252.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:12.812Z,1516683252.812 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T04:54:13.183Z,1516683253.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:13.573Z,1516683253.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:13.999Z,1516683253.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:14.397Z,1516683254.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:14.801Z,1516683254.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:15.177Z,1516683255.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:15.580Z,1516683255.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:16.006Z,1516683256.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:16.406Z,1516683256.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:16.783Z,1516683256.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:17.185Z,1516683257.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:17.581Z,1516683257.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:17.984Z,1516683257.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:18.389Z,1516683258.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:18.784Z,1516683258.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:19.181Z,1516683259.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:19.582Z,1516683259.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:20.008Z,1516683260.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:20.385Z,1516683260.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:20.791Z,1516683260.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:21.183Z,1516683261.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:21.580Z,1516683261.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:21.985Z,1516683261.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:22.388Z,1516683262.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:22.789Z,1516683262.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:23.189Z,1516683263.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:23.580Z,1516683263.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:23.993Z,1516683263.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:24.389Z,1516683264.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:24.789Z,1516683264.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:25.185Z,1516683265.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:25.580Z,1516683265.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:25.978Z,1516683265.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:26.393Z,1516683266.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:26.790Z,1516683266.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:27.189Z,1516683267.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:27.577Z,1516683267.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:27.978Z,1516683267.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:28.380Z,1516683268.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:28.781Z,1516683268.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:29.195Z,1516683269.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:29.593Z,1516683269.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:29.989Z,1516683269.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:30.389Z,1516683270.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:30.785Z,1516683270.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:31.183Z,1516683271.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:31.588Z,1516683271.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:31.989Z,1516683271.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:32.383Z,1516683272.383 [PNI_TCM](ERROR): CRC does not match. Expected:0x57891 got:0x6466 2018-01-23T04:54:32.409Z,1516683272.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:32.790Z,1516683272.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:33.189Z,1516683273.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:33.589Z,1516683273.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:33.962Z,1516683273.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T04:54:34.001Z,1516683274.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:34.386Z,1516683274.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:34.782Z,1516683274.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:35.191Z,1516683275.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:35.592Z,1516683275.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:35.995Z,1516683275.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:36.401Z,1516683276.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:36.790Z,1516683276.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:37.193Z,1516683277.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:37.570Z,1516683277.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:37.969Z,1516683277.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:38.399Z,1516683278.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:38.809Z,1516683278.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:39.201Z,1516683279.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:39.577Z,1516683279.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:40.004Z,1516683280.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:40.407Z,1516683280.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:40.771Z,1516683280.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:41.202Z,1516683281.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:41.606Z,1516683281.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:41.999Z,1516683281.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:42.401Z,1516683282.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:42.781Z,1516683282.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:43.204Z,1516683283.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:43.599Z,1516683283.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:43.981Z,1516683283.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:44.402Z,1516683284.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:44.805Z,1516683284.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:45.178Z,1516683285.178 [PNI_TCM](ERROR): CRC does not match. Expected:0x12671 got:0x33244 2018-01-23T04:54:45.208Z,1516683285.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:45.599Z,1516683285.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:45.967Z,1516683285.967 [PNI_TCM](ERROR): CRC does not match. Expected:0x12898 got:0x13539 2018-01-23T04:54:45.995Z,1516683285.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:46.392Z,1516683286.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:46.774Z,1516683286.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:47.204Z,1516683287.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:47.595Z,1516683287.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:48.002Z,1516683288.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:48.376Z,1516683288.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:48.779Z,1516683288.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:49.179Z,1516683289.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:49.601Z,1516683289.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:49.974Z,1516683289.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:50.382Z,1516683290.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:50.807Z,1516683290.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:51.208Z,1516683291.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:51.581Z,1516683291.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:51.979Z,1516683291.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:52.381Z,1516683292.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:52.810Z,1516683292.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:53.183Z,1516683293.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:53.588Z,1516683293.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:53.985Z,1516683293.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:54.410Z,1516683294.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:54.779Z,1516683294.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:57.989Z,1516683297.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:58.117Z,1516683298.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:58.486Z,1516683298.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:58.915Z,1516683298.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:59.286Z,1516683299.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:54:59.682Z,1516683299.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:00.094Z,1516683300.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:00.488Z,1516683300.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:00.886Z,1516683300.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:01.298Z,1516683301.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:01.701Z,1516683301.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:02.097Z,1516683302.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:02.493Z,1516683302.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:02.889Z,1516683302.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:03.286Z,1516683303.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:03.691Z,1516683303.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:04.098Z,1516683304.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:04.497Z,1516683304.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:04.896Z,1516683304.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:05.292Z,1516683305.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:05.697Z,1516683305.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:06.104Z,1516683306.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:06.505Z,1516683306.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:06.903Z,1516683306.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:07.294Z,1516683307.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:07.697Z,1516683307.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:08.097Z,1516683308.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:08.502Z,1516683308.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:08.905Z,1516683308.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:09.290Z,1516683309.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:09.692Z,1516683309.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:10.105Z,1516683310.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:10.506Z,1516683310.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:10.899Z,1516683310.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:11.297Z,1516683311.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:11.677Z,1516683311.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:12.114Z,1516683312.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:12.523Z,1516683312.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:12.905Z,1516683312.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:13.287Z,1516683313.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:13.688Z,1516683313.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:14.086Z,1516683314.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:14.489Z,1516683314.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:14.886Z,1516683314.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:15.284Z,1516683315.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:15.682Z,1516683315.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:16.086Z,1516683316.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:16.490Z,1516683316.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:16.921Z,1516683316.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:17.285Z,1516683317.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:17.683Z,1516683317.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:18.086Z,1516683318.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:18.498Z,1516683318.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:18.893Z,1516683318.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:19.284Z,1516683319.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:19.696Z,1516683319.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:20.098Z,1516683320.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:20.503Z,1516683320.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:20.905Z,1516683320.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:21.307Z,1516683321.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:21.701Z,1516683321.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:22.113Z,1516683322.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:22.511Z,1516683322.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:22.936Z,1516683322.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:23.317Z,1516683323.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:23.718Z,1516683323.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:24.118Z,1516683324.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:24.517Z,1516683324.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:24.925Z,1516683324.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:25.328Z,1516683325.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:25.697Z,1516683325.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:26.105Z,1516683326.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:26.527Z,1516683326.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:26.903Z,1516683326.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:27.339Z,1516683327.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:27.708Z,1516683327.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:28.137Z,1516683328.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:28.518Z,1516683328.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:28.910Z,1516683328.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:29.305Z,1516683329.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:29.701Z,1516683329.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:30.127Z,1516683330.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:30.523Z,1516683330.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:30.905Z,1516683330.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:31.335Z,1516683331.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:31.701Z,1516683331.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:32.106Z,1516683332.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:32.553Z,1516683332.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:32.902Z,1516683332.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:33.307Z,1516683333.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:33.699Z,1516683333.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:34.099Z,1516683334.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:34.478Z,1516683334.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:34.877Z,1516683334.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:35.306Z,1516683335.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:35.709Z,1516683335.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:36.105Z,1516683336.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:36.485Z,1516683336.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:36.881Z,1516683336.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:37.288Z,1516683337.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:37.679Z,1516683337.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:38.110Z,1516683338.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:38.510Z,1516683338.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:38.906Z,1516683338.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:39.290Z,1516683339.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:39.685Z,1516683339.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:40.094Z,1516683340.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:40.518Z,1516683340.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:40.889Z,1516683340.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:41.289Z,1516683341.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:41.688Z,1516683341.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:42.100Z,1516683342.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:42.505Z,1516683342.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:42.905Z,1516683342.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:43.296Z,1516683343.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:43.696Z,1516683343.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:44.093Z,1516683344.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:44.503Z,1516683344.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:44.896Z,1516683344.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:45.298Z,1516683345.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:45.702Z,1516683345.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:46.104Z,1516683346.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:46.497Z,1516683346.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:46.890Z,1516683346.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:47.295Z,1516683347.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:47.702Z,1516683347.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:48.096Z,1516683348.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:48.498Z,1516683348.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:48.910Z,1516683348.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:49.305Z,1516683349.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:49.696Z,1516683349.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:50.089Z,1516683350.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:50.496Z,1516683350.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:50.887Z,1516683350.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:51.309Z,1516683351.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:51.703Z,1516683351.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:52.110Z,1516683352.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:52.509Z,1516683352.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:52.880Z,1516683352.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x8410 got:0x16384 2018-01-23T04:55:52.905Z,1516683352.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:53.282Z,1516683353.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:53.298Z,1516683353.298 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T04:50:53.3Z 2018-01-23T04:55:53.298Z,1516683353.298 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T04:55:53.298Z,1516683353.298 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T04:55:53.713Z,1516683353.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:54.204Z,1516683354.204 [PNI_TCM](ERROR): CRC does not match. Expected:0x50870 got:0x6210 2018-01-23T04:55:54.221Z,1516683354.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:54.505Z,1516683354.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:57.710Z,1516683357.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:57.769Z,1516683357.769 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0040.lzma 2018-01-23T04:55:57.848Z,1516683357.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:58.176Z,1516683358.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:58.533Z,1516683358.533 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0040.lzma.bak 2018-01-23T04:55:58.533Z,1516683358.533 [DataOverHttps](INFO): SBD MOMSN=7755025 2018-01-23T04:55:58.598Z,1516683358.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:59.313Z,1516683359.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:55:59.460Z,1516683359.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:02.508Z,1516683362.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:02.662Z,1516683362.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:02.973Z,1516683362.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:03.381Z,1516683363.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:03.772Z,1516683363.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:04.183Z,1516683364.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:07.280Z,1516683367.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:07.359Z,1516683367.359 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0041.lzma 2018-01-23T04:56:07.430Z,1516683367.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:07.749Z,1516683367.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:08.110Z,1516683368.110 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0041.lzma.bak 2018-01-23T04:56:08.110Z,1516683368.110 [DataOverHttps](INFO): SBD MOMSN=7755027 2018-01-23T04:56:08.187Z,1516683368.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:08.781Z,1516683368.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:08.784Z,1516683368.784 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T04:56:08.784Z,1516683368.784 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T04:56:08.784Z,1516683368.784 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T04:56:08.952Z,1516683368.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:12.091Z,1516683372.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:12.234Z,1516683372.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:12.610Z,1516683372.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:12.998Z,1516683372.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:13.397Z,1516683373.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:13.799Z,1516683373.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:14.202Z,1516683374.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:14.602Z,1516683374.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:15.002Z,1516683375.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:15.400Z,1516683375.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:15.795Z,1516683375.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:16.202Z,1516683376.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:16.609Z,1516683376.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:17.002Z,1516683377.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:17.405Z,1516683377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:17.800Z,1516683377.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:18.201Z,1516683378.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:18.606Z,1516683378.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:19.013Z,1516683379.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:19.401Z,1516683379.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:19.799Z,1516683379.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:20.213Z,1516683380.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:20.605Z,1516683380.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:21.009Z,1516683381.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:21.399Z,1516683381.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:21.800Z,1516683381.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:22.209Z,1516683382.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:22.606Z,1516683382.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:23.001Z,1516683383.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:23.401Z,1516683383.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:23.809Z,1516683383.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:24.206Z,1516683384.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:24.606Z,1516683384.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:25.005Z,1516683385.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:25.402Z,1516683385.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:25.801Z,1516683385.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:26.212Z,1516683386.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:26.613Z,1516683386.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:27.010Z,1516683387.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:27.409Z,1516683387.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:27.804Z,1516683387.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:28.211Z,1516683388.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:28.616Z,1516683388.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:29.006Z,1516683389.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:29.402Z,1516683389.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:29.809Z,1516683389.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:30.211Z,1516683390.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:30.612Z,1516683390.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:31.016Z,1516683391.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:31.407Z,1516683391.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:31.804Z,1516683391.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:32.220Z,1516683392.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:32.615Z,1516683392.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:33.013Z,1516683393.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:33.415Z,1516683393.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:33.801Z,1516683393.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:34.214Z,1516683394.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:34.617Z,1516683394.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:35.023Z,1516683395.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:35.414Z,1516683395.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:35.817Z,1516683395.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:36.219Z,1516683396.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:36.614Z,1516683396.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:37.023Z,1516683397.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:37.463Z,1516683397.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:37.793Z,1516683397.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:38.246Z,1516683398.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:38.618Z,1516683398.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:39.024Z,1516683399.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:39.388Z,1516683399.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:39.793Z,1516683399.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:40.210Z,1516683400.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:40.602Z,1516683400.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:41.041Z,1516683401.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:41.392Z,1516683401.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:41.791Z,1516683401.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:42.222Z,1516683402.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:42.629Z,1516683402.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:43.027Z,1516683403.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:43.398Z,1516683403.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:43.795Z,1516683403.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:44.201Z,1516683404.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:44.610Z,1516683404.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:45.009Z,1516683405.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:45.398Z,1516683405.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:45.800Z,1516683405.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:46.199Z,1516683406.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:46.609Z,1516683406.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:47.009Z,1516683407.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:47.409Z,1516683407.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:47.800Z,1516683407.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:48.205Z,1516683408.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:48.205Z,1516683408.205 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-01-23T04:56:48.205Z,1516683408.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:56:48.207Z,1516683408.207 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:48.207Z,1516683408.207 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-01-23T04:56:48.207Z,1516683408.207 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:56:48.209Z,1516683408.209 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:48.209Z,1516683408.209 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34 2018-01-23T04:56:48.209Z,1516683408.209 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:56:48.241Z,1516683408.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:56:48.241Z,1516683408.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:56:48.242Z,1516683408.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:56:48.625Z,1516683408.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:56:48.625Z,1516683408.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-01-23T04:56:48.625Z,1516683408.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:56:48.626Z,1516683408.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-01-23T04:56:48.626Z,1516683408.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:56:48.626Z,1516683408.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34 2018-01-23T04:56:48.999Z,1516683408.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:56:48.000Z,1516683409.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:56:49.000Z,1516683409.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:56:49.000Z,1516683409.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:56:49.001Z,1516683409.001 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:56:49.001Z,1516683409.001 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:56:49.001Z,1516683409.001 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:56:49.002Z,1516683409.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:56:49.002Z,1516683409.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:56:49.406Z,1516683409.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:56:49.407Z,1516683409.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:49.817Z,1516683409.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:56:49.818Z,1516683409.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:50.211Z,1516683410.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:56:50.212Z,1516683410.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:50.599Z,1516683410.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:56:50.600Z,1516683410.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:51.001Z,1516683411.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:56:51.002Z,1516683411.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:51.405Z,1516683411.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:56:51.406Z,1516683411.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:51.800Z,1516683411.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:56:51.801Z,1516683411.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:52.204Z,1516683412.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:56:52.205Z,1516683412.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:52.616Z,1516683412.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:56:52.617Z,1516683412.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:53.016Z,1516683413.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:56:53.017Z,1516683413.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:53.411Z,1516683413.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:56:53.412Z,1516683413.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:53.803Z,1516683413.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:56:53.804Z,1516683413.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:54.204Z,1516683414.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:56:54.205Z,1516683414.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:54.605Z,1516683414.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:56:54.606Z,1516683414.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:55.005Z,1516683415.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:56:55.006Z,1516683415.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:55.413Z,1516683415.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:56:55.414Z,1516683415.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:55.813Z,1516683415.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:56:55.814Z,1516683415.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:56.214Z,1516683416.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:56:56.215Z,1516683416.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:56.603Z,1516683416.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:56:56.604Z,1516683416.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:57.008Z,1516683417.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:56:57.009Z,1516683417.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:57.404Z,1516683417.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:56:57.405Z,1516683417.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:57.801Z,1516683417.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:56:57.802Z,1516683417.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:58.203Z,1516683418.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:56:58.204Z,1516683418.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:58.611Z,1516683418.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:56:58.612Z,1516683418.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:59.013Z,1516683419.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T04:56:59.014Z,1516683419.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:59.413Z,1516683419.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T04:56:59.413Z,1516683419.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:56:59.807Z,1516683419.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T04:56:59.808Z,1516683419.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:00.204Z,1516683420.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T04:57:00.205Z,1516683420.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:00.602Z,1516683420.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T04:57:00.603Z,1516683420.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:01.011Z,1516683421.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T04:57:01.012Z,1516683421.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:01.410Z,1516683421.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T04:57:01.411Z,1516683421.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:01.817Z,1516683421.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T04:57:01.818Z,1516683421.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:02.214Z,1516683422.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T04:57:02.215Z,1516683422.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:02.624Z,1516683422.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T04:57:02.625Z,1516683422.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:03.008Z,1516683423.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T04:57:03.009Z,1516683423.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:03.406Z,1516683423.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T04:57:03.407Z,1516683423.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:03.801Z,1516683423.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T04:57:03.802Z,1516683423.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:04.224Z,1516683424.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T04:57:04.225Z,1516683424.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:04.604Z,1516683424.604 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T04:57:04.620Z,1516683424.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T04:57:04.621Z,1516683424.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:05.016Z,1516683425.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T04:57:05.017Z,1516683425.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:05.416Z,1516683425.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T04:57:05.417Z,1516683425.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:05.813Z,1516683425.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T04:57:05.814Z,1516683425.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:06.208Z,1516683426.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T04:57:06.209Z,1516683426.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:06.605Z,1516683426.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T04:57:06.606Z,1516683426.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:07.005Z,1516683427.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T04:57:07.006Z,1516683427.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:07.424Z,1516683427.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T04:57:07.425Z,1516683427.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:07.809Z,1516683427.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x48715 got:0x33306 2018-01-23T04:57:07.851Z,1516683427.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T04:57:07.852Z,1516683427.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:08.214Z,1516683428.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:08.600Z,1516683428.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:09.024Z,1516683429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:09.414Z,1516683429.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:12.485Z,1516683432.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:12.616Z,1516683432.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:13.016Z,1516683433.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:13.409Z,1516683433.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:13.820Z,1516683433.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:14.170Z,1516683434.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:14.574Z,1516683434.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:14.977Z,1516683434.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:15.380Z,1516683435.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:15.785Z,1516683435.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:16.189Z,1516683436.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:16.573Z,1516683436.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:16.972Z,1516683436.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:17.383Z,1516683437.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:17.773Z,1516683437.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:18.172Z,1516683438.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:18.589Z,1516683438.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:18.993Z,1516683438.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:19.384Z,1516683439.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:19.780Z,1516683439.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:20.176Z,1516683440.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:20.581Z,1516683440.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:20.985Z,1516683440.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:21.390Z,1516683441.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:21.787Z,1516683441.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:22.193Z,1516683442.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:22.587Z,1516683442.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:22.961Z,1516683442.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:23.391Z,1516683443.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:23.775Z,1516683443.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:24.172Z,1516683444.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:24.578Z,1516683444.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:24.985Z,1516683444.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:25.385Z,1516683445.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:25.780Z,1516683445.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:26.176Z,1516683446.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:26.573Z,1516683446.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:26.973Z,1516683446.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:27.377Z,1516683447.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:27.778Z,1516683447.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:28.181Z,1516683448.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:28.573Z,1516683448.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:28.970Z,1516683448.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:29.377Z,1516683449.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:29.772Z,1516683449.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:30.173Z,1516683450.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:30.585Z,1516683450.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:30.988Z,1516683450.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:31.384Z,1516683451.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:31.776Z,1516683451.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:32.171Z,1516683452.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:32.573Z,1516683452.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:32.982Z,1516683452.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:33.382Z,1516683453.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:33.786Z,1516683453.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:34.182Z,1516683454.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:34.572Z,1516683454.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:34.981Z,1516683454.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:35.376Z,1516683455.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:35.776Z,1516683455.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:36.172Z,1516683456.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:36.582Z,1516683456.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:36.998Z,1516683456.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:37.385Z,1516683457.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:37.764Z,1516683457.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:38.168Z,1516683458.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:38.568Z,1516683458.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:38.993Z,1516683458.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:39.395Z,1516683459.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:39.794Z,1516683459.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:40.178Z,1516683460.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:40.573Z,1516683460.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:40.968Z,1516683460.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:41.372Z,1516683461.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:41.773Z,1516683461.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:42.171Z,1516683462.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:42.578Z,1516683462.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:42.978Z,1516683462.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:43.374Z,1516683463.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:43.781Z,1516683463.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:44.174Z,1516683464.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:44.576Z,1516683464.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:44.972Z,1516683464.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:45.384Z,1516683465.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:45.778Z,1516683465.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:46.185Z,1516683466.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:46.572Z,1516683466.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:46.973Z,1516683466.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:47.377Z,1516683467.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:47.773Z,1516683467.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:48.175Z,1516683468.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:48.580Z,1516683468.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:48.989Z,1516683468.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:49.380Z,1516683469.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:49.774Z,1516683469.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:50.180Z,1516683470.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:50.577Z,1516683470.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:50.973Z,1516683470.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:51.389Z,1516683471.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:51.781Z,1516683471.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:52.184Z,1516683472.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:52.581Z,1516683472.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:52.975Z,1516683472.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:53.381Z,1516683473.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:53.774Z,1516683473.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:54.175Z,1516683474.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:54.585Z,1516683474.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:54.992Z,1516683474.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:55.387Z,1516683475.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:55.776Z,1516683475.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:56.172Z,1516683476.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:56.574Z,1516683476.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:56.984Z,1516683476.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:57.386Z,1516683477.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:57.787Z,1516683477.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:58.182Z,1516683478.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:58.579Z,1516683478.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:58.969Z,1516683478.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:59.385Z,1516683479.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:57:59.780Z,1516683479.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:00.176Z,1516683480.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:00.592Z,1516683480.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:00.989Z,1516683480.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:01.386Z,1516683481.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:01.783Z,1516683481.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:02.185Z,1516683482.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:02.580Z,1516683482.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:02.989Z,1516683482.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:03.390Z,1516683483.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:03.790Z,1516683483.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:04.201Z,1516683484.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:04.601Z,1516683484.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:04.962Z,1516683484.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:05.367Z,1516683485.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:05.798Z,1516683485.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:06.168Z,1516683486.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:06.601Z,1516683486.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:06.997Z,1516683486.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:07.386Z,1516683487.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:07.773Z,1516683487.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:08.175Z,1516683488.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:08.572Z,1516683488.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:08.974Z,1516683488.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:09.388Z,1516683489.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:09.782Z,1516683489.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:12.885Z,1516683492.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:13.033Z,1516683493.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:13.386Z,1516683493.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:13.791Z,1516683493.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:14.184Z,1516683494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:14.589Z,1516683494.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:14.990Z,1516683494.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:15.389Z,1516683495.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:15.792Z,1516683495.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:16.187Z,1516683496.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:16.593Z,1516683496.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:16.984Z,1516683496.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:17.393Z,1516683497.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:17.793Z,1516683497.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:18.193Z,1516683498.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:18.588Z,1516683498.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:18.985Z,1516683498.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:19.393Z,1516683499.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:19.793Z,1516683499.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:20.193Z,1516683500.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:20.587Z,1516683500.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:20.985Z,1516683500.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:21.395Z,1516683501.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:21.800Z,1516683501.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:22.194Z,1516683502.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:22.585Z,1516683502.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:22.987Z,1516683502.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:23.394Z,1516683503.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:23.801Z,1516683503.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:24.201Z,1516683504.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:24.583Z,1516683504.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:24.986Z,1516683504.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:25.405Z,1516683505.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:25.798Z,1516683505.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:26.194Z,1516683506.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:26.587Z,1516683506.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:26.991Z,1516683506.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:27.396Z,1516683507.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:27.800Z,1516683507.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:28.202Z,1516683508.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:28.592Z,1516683508.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:28.993Z,1516683508.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:29.409Z,1516683509.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:29.799Z,1516683509.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:30.196Z,1516683510.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:30.597Z,1516683510.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:30.990Z,1516683510.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:31.411Z,1516683511.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:31.804Z,1516683511.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:32.197Z,1516683512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:32.593Z,1516683512.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:32.997Z,1516683512.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:33.400Z,1516683513.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:33.806Z,1516683513.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:34.209Z,1516683514.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:34.581Z,1516683514.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:34.981Z,1516683514.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:35.412Z,1516683515.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:35.813Z,1516683515.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:36.213Z,1516683516.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:36.585Z,1516683516.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:36.983Z,1516683516.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:37.387Z,1516683517.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:37.790Z,1516683517.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:38.186Z,1516683518.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:38.586Z,1516683518.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:38.990Z,1516683518.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:39.389Z,1516683519.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:39.790Z,1516683519.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:40.197Z,1516683520.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:40.588Z,1516683520.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:40.986Z,1516683520.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:41.393Z,1516683521.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:41.796Z,1516683521.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:42.194Z,1516683522.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:42.589Z,1516683522.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:42.984Z,1516683522.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:43.397Z,1516683523.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:43.802Z,1516683523.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:44.195Z,1516683524.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:44.593Z,1516683524.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:45.000Z,1516683525.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:45.398Z,1516683525.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:45.808Z,1516683525.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:46.203Z,1516683526.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:46.575Z,1516683526.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:46.977Z,1516683526.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:47.380Z,1516683527.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:47.807Z,1516683527.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:48.213Z,1516683528.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:48.610Z,1516683528.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:48.985Z,1516683528.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:49.384Z,1516683529.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:49.793Z,1516683529.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:50.185Z,1516683530.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:50.598Z,1516683530.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:50.994Z,1516683530.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:51.396Z,1516683531.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:51.793Z,1516683531.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:52.187Z,1516683532.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:52.583Z,1516683532.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:52.989Z,1516683532.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:53.387Z,1516683533.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:53.788Z,1516683533.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:54.190Z,1516683534.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:54.597Z,1516683534.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:54.984Z,1516683534.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:55.386Z,1516683535.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:55.789Z,1516683535.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:56.184Z,1516683536.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:56.597Z,1516683536.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:57.001Z,1516683537.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:57.395Z,1516683537.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:57.793Z,1516683537.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:58.190Z,1516683538.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:58.592Z,1516683538.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:58.991Z,1516683538.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:59.397Z,1516683539.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:58:59.799Z,1516683539.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:00.199Z,1516683540.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:00.595Z,1516683540.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:00.991Z,1516683540.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:01.392Z,1516683541.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:01.797Z,1516683541.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:02.192Z,1516683542.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:02.605Z,1516683542.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:03.002Z,1516683543.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:03.395Z,1516683543.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:03.788Z,1516683543.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:04.176Z,1516683544.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:04.576Z,1516683544.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:04.981Z,1516683544.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:05.382Z,1516683545.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:05.790Z,1516683545.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:06.213Z,1516683546.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:06.612Z,1516683546.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:06.993Z,1516683546.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:07.392Z,1516683547.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:07.787Z,1516683547.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:08.186Z,1516683548.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:08.591Z,1516683548.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:08.991Z,1516683548.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:09.392Z,1516683549.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:09.788Z,1516683549.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:12.887Z,1516683552.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:13.029Z,1516683553.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:13.385Z,1516683553.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:13.790Z,1516683553.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:14.186Z,1516683554.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:14.581Z,1516683554.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:14.977Z,1516683554.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:15.376Z,1516683555.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:15.786Z,1516683555.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:16.188Z,1516683556.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:16.583Z,1516683556.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:16.980Z,1516683556.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:17.382Z,1516683557.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:17.784Z,1516683557.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:18.180Z,1516683558.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:18.589Z,1516683558.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:18.996Z,1516683558.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:19.393Z,1516683559.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:19.787Z,1516683559.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:20.185Z,1516683560.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:20.567Z,1516683560.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:20.972Z,1516683560.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:21.374Z,1516683561.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:21.778Z,1516683561.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:22.205Z,1516683562.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:22.575Z,1516683562.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:22.972Z,1516683562.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:23.371Z,1516683563.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:23.777Z,1516683563.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:24.173Z,1516683564.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:24.578Z,1516683564.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:24.974Z,1516683564.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:25.378Z,1516683565.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:25.771Z,1516683565.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:26.172Z,1516683566.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:26.575Z,1516683566.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:26.976Z,1516683566.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:27.373Z,1516683567.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:27.775Z,1516683567.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:28.184Z,1516683568.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:28.575Z,1516683568.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:28.970Z,1516683568.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:29.381Z,1516683569.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:29.771Z,1516683569.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:30.174Z,1516683570.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:30.588Z,1516683570.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:30.985Z,1516683570.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:31.385Z,1516683571.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:31.781Z,1516683571.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:32.176Z,1516683572.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:32.582Z,1516683572.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:32.977Z,1516683572.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:33.374Z,1516683573.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:33.782Z,1516683573.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:34.192Z,1516683574.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:34.582Z,1516683574.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:34.974Z,1516683574.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:35.383Z,1516683575.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:35.775Z,1516683575.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:36.180Z,1516683576.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:36.587Z,1516683576.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:36.982Z,1516683576.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:37.382Z,1516683577.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:37.781Z,1516683577.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:38.174Z,1516683578.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:38.577Z,1516683578.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:38.974Z,1516683578.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:39.373Z,1516683579.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:39.782Z,1516683579.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:40.187Z,1516683580.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:40.582Z,1516683580.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:40.977Z,1516683580.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:41.374Z,1516683581.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:41.775Z,1516683581.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:42.183Z,1516683582.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:42.587Z,1516683582.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:42.986Z,1516683582.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:43.382Z,1516683583.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:43.777Z,1516683583.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:44.174Z,1516683584.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:44.578Z,1516683584.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:44.991Z,1516683584.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:45.375Z,1516683585.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:45.791Z,1516683585.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:46.193Z,1516683586.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:46.585Z,1516683586.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:46.979Z,1516683586.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:47.385Z,1516683587.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:47.781Z,1516683587.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:48.186Z,1516683588.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:48.590Z,1516683588.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:48.987Z,1516683588.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:49.395Z,1516683589.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:49.396Z,1516683589.396 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-01-23T04:59:49.396Z,1516683589.396 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T04:59:49.397Z,1516683589.397 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:49.398Z,1516683589.398 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-01-23T04:59:49.398Z,1516683589.398 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T04:59:49.399Z,1516683589.399 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:49.400Z,1516683589.400 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35 2018-01-23T04:59:49.400Z,1516683589.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T04:59:49.428Z,1516683589.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T04:59:49.428Z,1516683589.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T04:59:49.428Z,1516683589.428 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T04:59:49.800Z,1516683589.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T04:59:49.800Z,1516683589.800 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-01-23T04:59:49.801Z,1516683589.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T04:59:49.801Z,1516683589.801 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-01-23T04:59:49.801Z,1516683589.801 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T04:59:49.802Z,1516683589.802 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35 2018-01-23T04:59:50.184Z,1516683590.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T04:59:50.184Z,1516683590.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:59:50.184Z,1516683590.184 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:59:50.185Z,1516683590.185 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T04:59:50.185Z,1516683590.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:59:50.185Z,1516683590.185 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:59:50.186Z,1516683590.186 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T04:59:50.186Z,1516683590.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T04:59:50.191Z,1516683590.191 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T04:59:50.588Z,1516683590.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T04:59:50.589Z,1516683590.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:50.974Z,1516683590.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T04:59:50.991Z,1516683590.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:51.398Z,1516683591.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T04:59:51.403Z,1516683591.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:51.793Z,1516683591.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T04:59:51.794Z,1516683591.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:52.179Z,1516683592.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T04:59:52.180Z,1516683592.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:52.577Z,1516683592.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T04:59:52.578Z,1516683592.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:52.972Z,1516683592.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T04:59:52.973Z,1516683592.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:53.372Z,1516683593.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T04:59:53.373Z,1516683593.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:53.776Z,1516683593.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T04:59:53.777Z,1516683593.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:54.174Z,1516683594.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T04:59:54.175Z,1516683594.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:54.582Z,1516683594.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T04:59:54.583Z,1516683594.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:54.982Z,1516683594.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T04:59:54.983Z,1516683594.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:55.387Z,1516683595.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T04:59:55.388Z,1516683595.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:55.775Z,1516683595.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T04:59:55.776Z,1516683595.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:56.174Z,1516683596.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T04:59:56.175Z,1516683596.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:56.582Z,1516683596.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T04:59:56.583Z,1516683596.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:56.973Z,1516683596.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T04:59:56.974Z,1516683596.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:57.372Z,1516683597.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T04:59:57.373Z,1516683597.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:57.788Z,1516683597.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T04:59:57.789Z,1516683597.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:58.185Z,1516683598.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T04:59:58.186Z,1516683598.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:58.588Z,1516683598.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T04:59:58.589Z,1516683598.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:58.977Z,1516683598.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T04:59:58.977Z,1516683598.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:59.372Z,1516683599.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T04:59:59.373Z,1516683599.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T04:59:59.774Z,1516683599.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T04:59:59.775Z,1516683599.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:00.173Z,1516683600.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:00:00.173Z,1516683600.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:00.583Z,1516683600.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:00:00.584Z,1516683600.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:00.990Z,1516683600.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:00:00.995Z,1516683600.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:01.388Z,1516683601.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:00:01.389Z,1516683601.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:01.776Z,1516683601.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:00:01.777Z,1516683601.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:02.173Z,1516683602.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:00:02.174Z,1516683602.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:02.579Z,1516683602.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:00:02.580Z,1516683602.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:02.988Z,1516683602.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:00:02.989Z,1516683602.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:03.376Z,1516683603.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:00:03.377Z,1516683603.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:03.793Z,1516683603.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:00:03.793Z,1516683603.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:04.187Z,1516683604.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:00:04.187Z,1516683604.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:04.586Z,1516683604.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:00:04.587Z,1516683604.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:04.973Z,1516683604.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:00:04.974Z,1516683604.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:05.394Z,1516683605.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:00:05.395Z,1516683605.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:05.778Z,1516683605.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:00:05.779Z,1516683605.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:06.188Z,1516683606.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:00:06.189Z,1516683606.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:06.592Z,1516683606.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:00:06.593Z,1516683606.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:06.986Z,1516683606.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:00:06.987Z,1516683606.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:07.385Z,1516683607.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:00:07.386Z,1516683607.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:07.785Z,1516683607.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:00:07.786Z,1516683607.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:08.176Z,1516683608.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:00:08.177Z,1516683608.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:08.579Z,1516683608.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:00:08.580Z,1516683608.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:08.985Z,1516683608.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:00:08.986Z,1516683608.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:09.384Z,1516683609.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:00:09.385Z,1516683609.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:09.785Z,1516683609.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:10.192Z,1516683610.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:13.297Z,1516683613.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:13.405Z,1516683613.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:13.790Z,1516683613.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:14.195Z,1516683614.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:14.601Z,1516683614.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:15.001Z,1516683615.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:15.401Z,1516683615.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:15.790Z,1516683615.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:16.194Z,1516683616.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:16.590Z,1516683616.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:16.990Z,1516683616.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:17.401Z,1516683617.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:17.801Z,1516683617.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:18.209Z,1516683618.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:18.601Z,1516683618.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:18.990Z,1516683618.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:19.388Z,1516683619.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:19.793Z,1516683619.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:20.190Z,1516683620.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:20.614Z,1516683620.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:21.003Z,1516683621.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:21.435Z,1516683621.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:21.856Z,1516683621.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:22.209Z,1516683622.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:22.629Z,1516683622.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:23.024Z,1516683623.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:23.427Z,1516683623.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:23.832Z,1516683623.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:24.215Z,1516683624.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:24.612Z,1516683624.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:25.028Z,1516683625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:25.411Z,1516683625.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:25.826Z,1516683625.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:26.216Z,1516683626.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:26.631Z,1516683626.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:27.040Z,1516683627.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:27.437Z,1516683627.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:27.852Z,1516683627.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:28.238Z,1516683628.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:28.643Z,1516683628.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:29.016Z,1516683629.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:29.418Z,1516683629.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:29.850Z,1516683629.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:30.221Z,1516683630.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:30.595Z,1516683630.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:30.991Z,1516683630.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:31.396Z,1516683631.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:31.790Z,1516683631.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:32.189Z,1516683632.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:32.595Z,1516683632.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:32.994Z,1516683632.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:33.394Z,1516683633.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:33.789Z,1516683633.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:34.189Z,1516683634.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:34.594Z,1516683634.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:35.023Z,1516683635.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:35.400Z,1516683635.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:35.793Z,1516683635.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:36.193Z,1516683636.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:36.594Z,1516683636.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:36.994Z,1516683636.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:37.394Z,1516683637.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:37.789Z,1516683637.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:38.189Z,1516683638.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:38.594Z,1516683638.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:38.993Z,1516683638.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:39.394Z,1516683639.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:39.789Z,1516683639.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:40.189Z,1516683640.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:40.594Z,1516683640.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:40.994Z,1516683640.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:41.397Z,1516683641.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:41.789Z,1516683641.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:42.197Z,1516683642.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:42.594Z,1516683642.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:43.001Z,1516683643.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:43.401Z,1516683643.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:43.800Z,1516683643.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:44.188Z,1516683644.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:44.601Z,1516683644.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:45.000Z,1516683645.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:45.402Z,1516683645.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:45.792Z,1516683645.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:46.189Z,1516683646.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:46.602Z,1516683646.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:47.002Z,1516683647.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:47.432Z,1516683647.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:47.793Z,1516683647.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:48.347Z,1516683648.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:48.602Z,1516683648.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:48.997Z,1516683648.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:49.401Z,1516683649.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:49.790Z,1516683649.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:50.260Z,1516683650.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:50.605Z,1516683650.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:51.001Z,1516683651.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:51.405Z,1516683651.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:51.793Z,1516683651.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:52.200Z,1516683652.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:52.597Z,1516683652.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:53.029Z,1516683653.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:53.408Z,1516683653.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:53.801Z,1516683653.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:54.195Z,1516683654.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:54.608Z,1516683654.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:55.003Z,1516683655.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:55.405Z,1516683655.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:55.797Z,1516683655.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:56.190Z,1516683656.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:56.612Z,1516683656.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:57.002Z,1516683657.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:57.402Z,1516683657.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:57.796Z,1516683657.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:58.197Z,1516683658.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:58.600Z,1516683658.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:59.008Z,1516683659.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:59.411Z,1516683659.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:00:59.799Z,1516683659.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:00.192Z,1516683660.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:00.603Z,1516683660.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:01.002Z,1516683661.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:01.405Z,1516683661.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:01.802Z,1516683661.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:02.205Z,1516683662.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:02.605Z,1516683662.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:03.002Z,1516683663.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:03.393Z,1516683663.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:03.807Z,1516683663.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:04.212Z,1516683664.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:04.603Z,1516683664.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:05.000Z,1516683665.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:05.397Z,1516683665.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:05.800Z,1516683665.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:06.202Z,1516683666.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:06.603Z,1516683666.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:07.015Z,1516683667.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:07.417Z,1516683667.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:07.808Z,1516683667.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:08.197Z,1516683668.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:08.601Z,1516683668.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:09.002Z,1516683669.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:09.006Z,1516683669.006 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:01:09.006Z,1516683669.006 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:01:09.006Z,1516683669.006 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:01:09.006Z,1516683669.006 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:01:09.401Z,1516683669.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:09.404Z,1516683669.404 [Default:CheckIn:D] Stopped 2018-01-23T05:01:09.404Z,1516683669.404 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:01:09.799Z,1516683669.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T05:01:09.840Z,1516683669.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.289062 min 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn:E] Stopped 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn] Stopped 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn](INFO): Running loop #11 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn] Running Loop=11 2018-01-23T05:01:09.844Z,1516683669.844 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:01:09.845Z,1516683669.845 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:01:10.208Z,1516683670.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:13.306Z,1516683673.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:13.448Z,1516683673.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:13.775Z,1516683673.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:14.198Z,1516683674.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:14.580Z,1516683674.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:14.985Z,1516683674.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:15.384Z,1516683675.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:15.805Z,1516683675.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:16.172Z,1516683676.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:16.576Z,1516683676.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:16.980Z,1516683676.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:17.406Z,1516683677.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:17.787Z,1516683677.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:18.185Z,1516683678.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:18.589Z,1516683678.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:18.990Z,1516683678.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:19.376Z,1516683679.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:19.774Z,1516683679.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:20.177Z,1516683680.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:20.572Z,1516683680.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:20.992Z,1516683680.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:21.387Z,1516683681.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:21.789Z,1516683681.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:22.193Z,1516683682.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:22.581Z,1516683682.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:22.980Z,1516683682.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:23.384Z,1516683683.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:23.810Z,1516683683.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:24.185Z,1516683684.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:24.589Z,1516683684.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:24.980Z,1516683684.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:25.376Z,1516683685.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:25.774Z,1516683685.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:26.173Z,1516683686.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:26.586Z,1516683686.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:26.993Z,1516683686.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:27.386Z,1516683687.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:27.784Z,1516683687.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:28.184Z,1516683688.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:28.577Z,1516683688.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:28.977Z,1516683688.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:29.380Z,1516683689.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:29.793Z,1516683689.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:30.210Z,1516683690.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:30.583Z,1516683690.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:30.976Z,1516683690.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:31.382Z,1516683691.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:31.780Z,1516683691.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:32.185Z,1516683692.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:32.580Z,1516683692.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:32.993Z,1516683692.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:33.389Z,1516683693.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:33.786Z,1516683693.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:34.180Z,1516683694.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:34.576Z,1516683694.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:34.975Z,1516683694.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:35.380Z,1516683695.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:35.784Z,1516683695.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:36.196Z,1516683696.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:36.593Z,1516683696.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:36.977Z,1516683696.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:37.380Z,1516683697.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:37.782Z,1516683697.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:38.177Z,1516683698.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:38.580Z,1516683698.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:38.986Z,1516683698.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:39.393Z,1516683699.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:39.793Z,1516683699.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:40.173Z,1516683700.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:40.584Z,1516683700.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:40.979Z,1516683700.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:41.375Z,1516683701.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:41.787Z,1516683701.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:42.190Z,1516683702.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:42.590Z,1516683702.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:42.986Z,1516683702.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:43.377Z,1516683703.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:43.788Z,1516683703.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:44.166Z,1516683704.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:44.562Z,1516683704.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:44.998Z,1516683704.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:45.396Z,1516683705.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:45.791Z,1516683705.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:46.197Z,1516683706.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:46.597Z,1516683706.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:46.967Z,1516683706.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:47.401Z,1516683707.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:47.805Z,1516683707.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:48.191Z,1516683708.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:48.575Z,1516683708.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:48.973Z,1516683708.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:49.378Z,1516683709.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:49.773Z,1516683709.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:50.173Z,1516683710.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:50.571Z,1516683710.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:50.981Z,1516683710.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:51.384Z,1516683711.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:51.782Z,1516683711.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:52.180Z,1516683712.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:52.573Z,1516683712.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:52.974Z,1516683712.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:53.382Z,1516683713.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:53.782Z,1516683713.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:54.182Z,1516683714.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:54.587Z,1516683714.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:54.984Z,1516683714.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:55.373Z,1516683715.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:55.774Z,1516683715.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:56.173Z,1516683716.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:56.573Z,1516683716.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:56.993Z,1516683716.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:57.412Z,1516683717.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:57.793Z,1516683717.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:58.178Z,1516683718.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:58.577Z,1516683718.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:58.974Z,1516683718.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:59.380Z,1516683719.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:01:59.789Z,1516683719.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:00.190Z,1516683720.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:00.585Z,1516683720.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:00.982Z,1516683720.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:01.378Z,1516683721.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:01.781Z,1516683721.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:02.185Z,1516683722.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:02.570Z,1516683722.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:02.997Z,1516683722.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:03.392Z,1516683723.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:03.793Z,1516683723.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:04.185Z,1516683724.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:04.567Z,1516683724.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:04.993Z,1516683724.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:05.372Z,1516683725.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:05.803Z,1516683725.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:06.194Z,1516683726.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:06.595Z,1516683726.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:06.975Z,1516683726.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:07.377Z,1516683727.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:07.777Z,1516683727.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:08.177Z,1516683728.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:08.569Z,1516683728.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:08.978Z,1516683728.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:09.404Z,1516683729.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:09.782Z,1516683729.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:10.173Z,1516683730.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:10.580Z,1516683730.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:13.673Z,1516683733.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:13.809Z,1516683733.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:14.171Z,1516683734.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:14.577Z,1516683734.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:14.968Z,1516683734.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:15.364Z,1516683735.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:15.768Z,1516683735.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:16.162Z,1516683736.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:16.564Z,1516683736.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:16.972Z,1516683736.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:17.377Z,1516683737.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:17.767Z,1516683737.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:18.166Z,1516683738.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:18.558Z,1516683738.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:18.967Z,1516683738.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:19.367Z,1516683739.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:19.768Z,1516683739.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:20.179Z,1516683740.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:20.576Z,1516683740.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:20.962Z,1516683740.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:21.369Z,1516683741.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:21.780Z,1516683741.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:22.174Z,1516683742.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:22.578Z,1516683742.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:22.980Z,1516683742.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:23.369Z,1516683743.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:23.782Z,1516683743.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:24.184Z,1516683744.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:24.583Z,1516683744.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:24.950Z,1516683744.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:25.352Z,1516683745.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:25.785Z,1516683745.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:26.189Z,1516683746.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:26.585Z,1516683746.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:26.957Z,1516683746.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:27.356Z,1516683747.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:27.762Z,1516683747.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:28.163Z,1516683748.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:28.569Z,1516683748.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:28.957Z,1516683748.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:29.355Z,1516683749.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:29.769Z,1516683749.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:30.166Z,1516683750.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:30.573Z,1516683750.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:30.960Z,1516683750.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:31.357Z,1516683751.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:31.766Z,1516683751.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:32.169Z,1516683752.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:32.567Z,1516683752.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:32.959Z,1516683752.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:33.366Z,1516683753.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:33.767Z,1516683753.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:34.170Z,1516683754.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:34.573Z,1516683754.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:34.961Z,1516683754.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:35.355Z,1516683755.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:35.781Z,1516683755.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:36.172Z,1516683756.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:36.577Z,1516683756.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:36.964Z,1516683756.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:37.368Z,1516683757.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:37.768Z,1516683757.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:38.179Z,1516683758.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:38.572Z,1516683758.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:38.963Z,1516683758.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:39.364Z,1516683759.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:39.771Z,1516683759.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:40.173Z,1516683760.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:40.575Z,1516683760.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:40.970Z,1516683760.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:41.368Z,1516683761.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:41.777Z,1516683761.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:42.175Z,1516683762.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:42.576Z,1516683762.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:42.960Z,1516683762.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:43.348Z,1516683763.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:43.779Z,1516683763.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:44.172Z,1516683764.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:44.578Z,1516683764.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:44.945Z,1516683764.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:45.373Z,1516683765.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:45.776Z,1516683765.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:46.181Z,1516683766.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:46.589Z,1516683766.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:46.982Z,1516683766.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:47.373Z,1516683767.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:47.773Z,1516683767.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:48.176Z,1516683768.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:48.553Z,1516683768.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:48.985Z,1516683768.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:49.384Z,1516683769.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:49.776Z,1516683769.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:50.176Z,1516683770.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:50.561Z,1516683770.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:50.561Z,1516683770.561 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-01-23T05:02:50.561Z,1516683770.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:02:50.579Z,1516683770.579 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:50.579Z,1516683770.579 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-01-23T05:02:50.579Z,1516683770.579 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:02:50.581Z,1516683770.581 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:50.581Z,1516683770.581 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36 2018-01-23T05:02:50.581Z,1516683770.581 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:02:50.611Z,1516683770.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:02:50.611Z,1516683770.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:02:50.611Z,1516683770.611 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:02:50.975Z,1516683770.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:02:50.975Z,1516683770.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-01-23T05:02:50.976Z,1516683770.976 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:02:50.976Z,1516683770.976 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-01-23T05:02:50.976Z,1516683770.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:02:50.976Z,1516683770.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36 2018-01-23T05:02:51.354Z,1516683771.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:02:51.354Z,1516683771.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:02:51.354Z,1516683771.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:02:51.355Z,1516683771.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:02:51.355Z,1516683771.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:02:51.356Z,1516683771.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:02:51.356Z,1516683771.356 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:02:51.356Z,1516683771.356 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:02:51.357Z,1516683771.357 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:02:51.761Z,1516683771.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:02:51.762Z,1516683771.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:52.161Z,1516683772.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:02:52.162Z,1516683772.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:52.568Z,1516683772.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:02:52.569Z,1516683772.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:52.973Z,1516683772.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:02:52.974Z,1516683772.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:53.364Z,1516683773.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:02:53.365Z,1516683773.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:53.755Z,1516683773.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:02:53.756Z,1516683773.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:54.163Z,1516683774.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:02:54.164Z,1516683774.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:54.564Z,1516683774.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:02:54.565Z,1516683774.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:54.966Z,1516683774.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:02:54.967Z,1516683774.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:55.370Z,1516683775.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:02:55.372Z,1516683775.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:55.770Z,1516683775.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:02:55.771Z,1516683775.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:56.164Z,1516683776.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:02:56.165Z,1516683776.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:56.561Z,1516683776.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:02:56.562Z,1516683776.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:56.959Z,1516683776.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:02:56.960Z,1516683776.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:57.359Z,1516683777.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:02:57.360Z,1516683777.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:57.762Z,1516683777.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:02:57.763Z,1516683777.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:58.175Z,1516683778.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:02:58.176Z,1516683778.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:58.516Z,1516683778.516 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:02:58.516Z,1516683778.516 [NAL9602] Data Fault, FailCount= 5 2018-01-23T05:02:58.516Z,1516683778.516 [NAL9602](ERROR): Data Fault 2018-01-23T05:02:58.574Z,1516683778.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:02:58.579Z,1516683778.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:58.604Z,1516683778.604 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:02:58.605Z,1516683778.605 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T05:02:58.916Z,1516683778.916 [NAL9602](INFO): Powering down 2018-01-23T05:02:58.966Z,1516683778.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:02:58.971Z,1516683778.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:58.990Z,1516683778.990 [CBIT](INFO): Critical error at 20180123T050258 2018-01-23T05:02:59.368Z,1516683779.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:02:59.369Z,1516683779.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:02:59.768Z,1516683779.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:02:59.769Z,1516683779.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:00.170Z,1516683780.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:03:00.171Z,1516683780.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:00.559Z,1516683780.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:03:00.560Z,1516683780.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:00.965Z,1516683780.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:03:00.966Z,1516683780.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:01.362Z,1516683781.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:03:01.363Z,1516683781.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:01.757Z,1516683781.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:03:01.758Z,1516683781.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:02.157Z,1516683782.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:03:02.158Z,1516683782.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:02.572Z,1516683782.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:03:02.573Z,1516683782.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:02.962Z,1516683782.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:03:02.964Z,1516683782.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:03.365Z,1516683783.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:03:03.366Z,1516683783.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:03.756Z,1516683783.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:03:03.757Z,1516683783.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:04.162Z,1516683784.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:03:04.167Z,1516683784.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:04.572Z,1516683784.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:03:04.573Z,1516683784.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:04.943Z,1516683784.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:03:04.944Z,1516683784.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:05.346Z,1516683785.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:03:05.348Z,1516683785.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:05.753Z,1516683785.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:03:05.754Z,1516683785.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:06.154Z,1516683786.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:03:06.155Z,1516683786.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:06.551Z,1516683786.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:03:06.552Z,1516683786.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:06.952Z,1516683786.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:03:06.953Z,1516683786.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:07.364Z,1516683787.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:03:07.365Z,1516683787.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:07.753Z,1516683787.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:03:07.754Z,1516683787.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:08.153Z,1516683788.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:03:08.154Z,1516683788.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:08.551Z,1516683788.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:03:08.552Z,1516683788.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:08.953Z,1516683788.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:03:08.954Z,1516683788.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:09.353Z,1516683789.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:03:09.354Z,1516683789.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:09.760Z,1516683789.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:03:09.761Z,1516683789.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:10.160Z,1516683790.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:03:10.161Z,1516683790.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:10.555Z,1516683790.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:03:10.556Z,1516683790.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:10.954Z,1516683790.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:14.058Z,1516683794.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:14.189Z,1516683794.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:14.546Z,1516683794.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:14.950Z,1516683794.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:15.336Z,1516683795.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:15.751Z,1516683795.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:16.154Z,1516683796.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:16.528Z,1516683796.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:16.959Z,1516683796.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:17.331Z,1516683797.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:17.728Z,1516683797.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:18.138Z,1516683798.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:18.535Z,1516683798.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:18.931Z,1516683798.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:19.342Z,1516683799.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:19.738Z,1516683799.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:20.135Z,1516683800.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:20.542Z,1516683800.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:20.938Z,1516683800.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:21.338Z,1516683801.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:21.736Z,1516683801.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:22.137Z,1516683802.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:22.534Z,1516683802.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:22.943Z,1516683802.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:23.337Z,1516683803.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:23.737Z,1516683803.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:24.136Z,1516683804.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:24.536Z,1516683804.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:24.935Z,1516683804.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:25.344Z,1516683805.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:25.743Z,1516683805.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:26.137Z,1516683806.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:26.545Z,1516683806.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:26.948Z,1516683806.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:27.337Z,1516683807.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:27.742Z,1516683807.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:28.142Z,1516683808.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:28.538Z,1516683808.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:28.944Z,1516683808.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:29.341Z,1516683809.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:29.737Z,1516683809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:30.137Z,1516683810.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:30.542Z,1516683810.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:30.937Z,1516683810.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:31.339Z,1516683811.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:31.742Z,1516683811.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:32.137Z,1516683812.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:32.537Z,1516683812.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:32.941Z,1516683812.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:33.338Z,1516683813.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:33.747Z,1516683813.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:34.143Z,1516683814.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:34.538Z,1516683814.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:34.944Z,1516683814.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:35.343Z,1516683815.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:35.739Z,1516683815.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:36.142Z,1516683816.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:36.544Z,1516683816.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:36.940Z,1516683816.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:37.348Z,1516683817.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:37.741Z,1516683817.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:38.143Z,1516683818.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:38.553Z,1516683818.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:38.938Z,1516683818.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:39.340Z,1516683819.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:39.741Z,1516683819.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:40.140Z,1516683820.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:40.539Z,1516683820.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:40.944Z,1516683820.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:41.340Z,1516683821.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:41.739Z,1516683821.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:42.137Z,1516683822.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:42.538Z,1516683822.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:42.937Z,1516683822.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:43.339Z,1516683823.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:43.735Z,1516683823.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:44.137Z,1516683824.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:44.537Z,1516683824.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:44.937Z,1516683824.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:45.338Z,1516683825.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:45.748Z,1516683825.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:46.137Z,1516683826.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:46.538Z,1516683826.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:46.940Z,1516683826.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:47.335Z,1516683827.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:47.738Z,1516683827.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:48.146Z,1516683828.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:48.535Z,1516683828.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:48.938Z,1516683828.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:49.344Z,1516683829.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:49.741Z,1516683829.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:50.142Z,1516683830.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:50.540Z,1516683830.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:50.938Z,1516683830.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:51.342Z,1516683831.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:51.744Z,1516683831.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:52.136Z,1516683832.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:52.537Z,1516683832.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:52.939Z,1516683832.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:53.335Z,1516683833.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:53.738Z,1516683833.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:54.140Z,1516683834.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:54.535Z,1516683834.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:54.938Z,1516683834.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:55.340Z,1516683835.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:55.738Z,1516683835.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:56.142Z,1516683836.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:56.540Z,1516683836.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:56.937Z,1516683836.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:57.337Z,1516683837.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:57.739Z,1516683837.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:58.135Z,1516683838.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:58.538Z,1516683838.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:58.938Z,1516683838.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:59.335Z,1516683839.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:03:59.738Z,1516683839.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:00.148Z,1516683840.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:00.535Z,1516683840.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:00.938Z,1516683840.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:01.344Z,1516683841.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:01.737Z,1516683841.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:02.140Z,1516683842.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:02.542Z,1516683842.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:02.946Z,1516683842.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:03.340Z,1516683843.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:03.748Z,1516683843.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:04.141Z,1516683844.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:04.547Z,1516683844.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:04.948Z,1516683844.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:05.341Z,1516683845.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:05.748Z,1516683845.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:06.140Z,1516683846.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:06.541Z,1516683846.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:06.940Z,1516683846.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:07.348Z,1516683847.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:07.741Z,1516683847.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:08.148Z,1516683848.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:08.547Z,1516683848.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:08.948Z,1516683848.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:09.342Z,1516683849.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:09.747Z,1516683849.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:10.141Z,1516683850.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:10.540Z,1516683850.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:10.948Z,1516683850.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:11.342Z,1516683851.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:14.435Z,1516683854.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:14.453Z,1516683854.453 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:04:14.553Z,1516683854.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:14.902Z,1516683854.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:15.309Z,1516683855.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:15.706Z,1516683855.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:16.105Z,1516683856.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:16.501Z,1516683856.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:16.905Z,1516683856.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:17.314Z,1516683857.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:17.703Z,1516683857.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:18.101Z,1516683858.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:18.504Z,1516683858.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:18.904Z,1516683858.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:19.312Z,1516683859.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:19.705Z,1516683859.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:20.101Z,1516683860.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:20.506Z,1516683860.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:20.908Z,1516683860.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:21.308Z,1516683861.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:21.711Z,1516683861.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:22.103Z,1516683862.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:22.503Z,1516683862.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:22.901Z,1516683862.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:23.304Z,1516683863.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:23.705Z,1516683863.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:24.106Z,1516683864.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:24.511Z,1516683864.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:24.902Z,1516683864.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:25.305Z,1516683865.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:25.706Z,1516683865.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:26.103Z,1516683866.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:26.504Z,1516683866.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:26.905Z,1516683866.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:27.306Z,1516683867.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:27.707Z,1516683867.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:28.108Z,1516683868.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:28.502Z,1516683868.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:28.904Z,1516683868.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:29.312Z,1516683869.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:29.707Z,1516683869.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:30.108Z,1516683870.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:30.504Z,1516683870.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:30.904Z,1516683870.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:31.305Z,1516683871.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:31.714Z,1516683871.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:32.103Z,1516683872.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:32.508Z,1516683872.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:32.911Z,1516683872.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:33.303Z,1516683873.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:33.705Z,1516683873.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:34.104Z,1516683874.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:34.509Z,1516683874.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:34.899Z,1516683874.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T05:04:34.925Z,1516683874.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:35.308Z,1516683875.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:35.701Z,1516683875.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:36.139Z,1516683876.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:36.500Z,1516683876.500 [PNI_TCM](ERROR): CRC does not match. Expected:0x62373 got:0x7618 2018-01-23T05:04:36.525Z,1516683876.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:36.904Z,1516683876.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:37.306Z,1516683877.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:37.720Z,1516683877.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:38.114Z,1516683878.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:38.507Z,1516683878.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:38.910Z,1516683878.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:39.316Z,1516683879.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:39.711Z,1516683879.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:40.116Z,1516683880.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:40.506Z,1516683880.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:40.917Z,1516683880.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:41.308Z,1516683881.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:41.722Z,1516683881.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:42.117Z,1516683882.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:42.529Z,1516683882.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:42.892Z,1516683882.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:43.325Z,1516683883.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:43.704Z,1516683883.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:44.128Z,1516683884.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:44.508Z,1516683884.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:44.912Z,1516683884.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:45.307Z,1516683885.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:45.729Z,1516683885.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:46.107Z,1516683886.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:46.507Z,1516683886.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:46.913Z,1516683886.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:47.326Z,1516683887.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:47.705Z,1516683887.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:48.108Z,1516683888.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:48.508Z,1516683888.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:48.913Z,1516683888.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:49.306Z,1516683889.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:49.715Z,1516683889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:50.116Z,1516683890.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:50.524Z,1516683890.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:50.919Z,1516683890.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:51.309Z,1516683891.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:51.707Z,1516683891.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:52.140Z,1516683892.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:52.504Z,1516683892.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:52.906Z,1516683892.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:53.319Z,1516683893.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:53.704Z,1516683893.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:54.102Z,1516683894.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:54.522Z,1516683894.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:54.909Z,1516683894.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:55.306Z,1516683895.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:55.713Z,1516683895.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:56.102Z,1516683896.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:56.506Z,1516683896.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:56.913Z,1516683896.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:57.302Z,1516683897.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:57.702Z,1516683897.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:58.109Z,1516683898.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:58.508Z,1516683898.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:58.521Z,1516683898.521 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T05:04:58.521Z,1516683898.521 [NAL9602] No Fault, FailCount= 5 2018-01-23T05:04:58.864Z,1516683898.864 [NAL9602](INFO): Powering up NAL9602 2018-01-23T05:04:58.909Z,1516683898.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:59.305Z,1516683899.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:04:59.705Z,1516683899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:00.103Z,1516683900.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:00.514Z,1516683900.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:00.902Z,1516683900.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:01.303Z,1516683901.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:01.711Z,1516683901.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:02.108Z,1516683902.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:02.508Z,1516683902.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:02.912Z,1516683902.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:03.314Z,1516683903.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:03.705Z,1516683903.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:04.111Z,1516683904.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:04.506Z,1516683904.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:04.913Z,1516683904.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:05.313Z,1516683905.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:05.714Z,1516683905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:06.104Z,1516683906.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:06.510Z,1516683906.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:06.919Z,1516683906.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:07.295Z,1516683907.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:07.694Z,1516683907.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:08.104Z,1516683908.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:08.496Z,1516683908.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:08.925Z,1516683908.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:09.330Z,1516683909.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:09.672Z,1516683909.672 [NAL9602](INFO): NAL9602 initialized 2018-01-23T05:05:09.725Z,1516683909.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:10.102Z,1516683910.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:10.525Z,1516683910.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:10.914Z,1516683910.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:11.306Z,1516683911.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:11.704Z,1516683911.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:14.798Z,1516683914.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:14.940Z,1516683914.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:15.287Z,1516683915.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:15.696Z,1516683915.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:16.090Z,1516683916.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:16.464Z,1516683916.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:16.863Z,1516683916.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:17.269Z,1516683917.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:17.694Z,1516683917.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:18.074Z,1516683918.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:18.493Z,1516683918.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:18.864Z,1516683918.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:19.263Z,1516683919.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:19.666Z,1516683919.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:20.072Z,1516683920.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:20.469Z,1516683920.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:20.901Z,1516683920.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:21.305Z,1516683921.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:21.677Z,1516683921.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:22.083Z,1516683922.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:22.479Z,1516683922.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:22.915Z,1516683922.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:23.276Z,1516683923.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:23.719Z,1516683923.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:24.101Z,1516683924.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:24.483Z,1516683924.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:24.865Z,1516683924.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:25.309Z,1516683925.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:25.705Z,1516683925.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:26.081Z,1516683926.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:26.511Z,1516683926.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:26.906Z,1516683926.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:27.317Z,1516683927.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:27.727Z,1516683927.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:28.086Z,1516683928.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:28.480Z,1516683928.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:28.902Z,1516683928.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:29.281Z,1516683929.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:29.706Z,1516683929.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:30.081Z,1516683930.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:30.503Z,1516683930.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:30.869Z,1516683930.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:31.264Z,1516683931.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:31.665Z,1516683931.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:32.065Z,1516683932.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:32.464Z,1516683932.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:32.873Z,1516683932.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:33.277Z,1516683933.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:33.680Z,1516683933.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:34.065Z,1516683934.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:34.469Z,1516683934.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:34.877Z,1516683934.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:35.277Z,1516683935.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:35.678Z,1516683935.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:36.078Z,1516683936.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:36.474Z,1516683936.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:36.873Z,1516683936.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:37.273Z,1516683937.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:37.661Z,1516683937.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:38.072Z,1516683938.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:38.454Z,1516683938.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:38.878Z,1516683938.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:39.293Z,1516683939.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:39.690Z,1516683939.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:40.057Z,1516683940.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:40.487Z,1516683940.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:40.860Z,1516683940.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:41.289Z,1516683941.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:41.693Z,1516683941.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:42.070Z,1516683942.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:42.466Z,1516683942.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:42.857Z,1516683942.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:43.255Z,1516683943.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:43.653Z,1516683943.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:44.095Z,1516683944.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:44.459Z,1516683944.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:44.866Z,1516683944.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:45.270Z,1516683945.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:45.670Z,1516683945.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:46.116Z,1516683946.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:46.457Z,1516683946.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:46.857Z,1516683946.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:47.265Z,1516683947.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:47.674Z,1516683947.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:48.092Z,1516683948.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:48.470Z,1516683948.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:48.876Z,1516683948.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:49.264Z,1516683949.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:49.662Z,1516683949.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:50.072Z,1516683950.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:50.464Z,1516683950.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:50.873Z,1516683950.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:51.281Z,1516683951.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:51.680Z,1516683951.680 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:51.681Z,1516683951.681 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-01-23T05:05:51.681Z,1516683951.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:05:51.682Z,1516683951.682 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:51.683Z,1516683951.683 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-01-23T05:05:51.683Z,1516683951.683 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:05:51.684Z,1516683951.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:51.684Z,1516683951.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37 2018-01-23T05:05:51.684Z,1516683951.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:05:51.750Z,1516683951.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:05:51.750Z,1516683951.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:05:51.750Z,1516683951.750 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:05:52.075Z,1516683952.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:05:52.075Z,1516683952.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-01-23T05:05:52.076Z,1516683952.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:05:52.076Z,1516683952.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-01-23T05:05:52.076Z,1516683952.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:05:52.076Z,1516683952.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37 2018-01-23T05:05:52.470Z,1516683952.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:05:52.471Z,1516683952.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:05:52.471Z,1516683952.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:05:52.471Z,1516683952.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:05:52.472Z,1516683952.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:05:52.472Z,1516683952.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:05:52.472Z,1516683952.472 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:05:52.473Z,1516683952.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:05:52.473Z,1516683952.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:05:52.876Z,1516683952.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:05:52.877Z,1516683952.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:53.264Z,1516683953.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:05:53.265Z,1516683953.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:53.674Z,1516683953.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:05:53.676Z,1516683953.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:54.078Z,1516683954.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:05:54.079Z,1516683954.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:54.474Z,1516683954.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:05:54.479Z,1516683954.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:54.868Z,1516683954.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:05:54.869Z,1516683954.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:55.266Z,1516683955.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:05:55.268Z,1516683955.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:55.665Z,1516683955.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:05:55.666Z,1516683955.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:56.069Z,1516683956.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:05:56.070Z,1516683956.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:56.473Z,1516683956.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:05:56.474Z,1516683956.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:56.874Z,1516683956.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:05:56.875Z,1516683956.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:57.279Z,1516683957.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:05:57.280Z,1516683957.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:57.692Z,1516683957.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:05:57.693Z,1516683957.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:58.060Z,1516683958.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:05:58.061Z,1516683958.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:58.475Z,1516683958.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:05:58.476Z,1516683958.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:58.877Z,1516683958.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:05:58.878Z,1516683958.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:59.274Z,1516683959.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:05:59.276Z,1516683959.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:05:59.683Z,1516683959.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:05:59.684Z,1516683959.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:00.079Z,1516683960.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:06:00.080Z,1516683960.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:00.483Z,1516683960.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:06:00.484Z,1516683960.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:00.874Z,1516683960.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:06:00.876Z,1516683960.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:01.277Z,1516683961.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:06:01.279Z,1516683961.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:01.653Z,1516683961.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:06:01.654Z,1516683961.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:02.080Z,1516683962.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:06:02.081Z,1516683962.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:02.485Z,1516683962.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:06:02.486Z,1516683962.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:02.878Z,1516683962.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:06:02.883Z,1516683962.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:03.288Z,1516683963.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:06:03.289Z,1516683963.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:03.692Z,1516683963.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:06:03.693Z,1516683963.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:04.059Z,1516683964.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:06:04.060Z,1516683964.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:04.488Z,1516683964.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:06:04.489Z,1516683964.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:04.861Z,1516683964.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:06:04.862Z,1516683964.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:05.261Z,1516683965.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:06:05.262Z,1516683965.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:05.680Z,1516683965.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:06:05.680Z,1516683965.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:06.074Z,1516683966.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:06:06.085Z,1516683966.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:06.470Z,1516683966.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:06:06.471Z,1516683966.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:06.862Z,1516683966.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:06:06.864Z,1516683966.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:07.263Z,1516683967.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:06:07.264Z,1516683967.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:07.667Z,1516683967.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:06:07.668Z,1516683967.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:08.076Z,1516683968.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:06:08.077Z,1516683968.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:08.476Z,1516683968.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:06:08.477Z,1516683968.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:08.869Z,1516683968.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:06:08.869Z,1516683968.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:09.264Z,1516683969.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:06:09.265Z,1516683969.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:09.681Z,1516683969.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:06:09.682Z,1516683969.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:10.073Z,1516683970.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:06:10.074Z,1516683970.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:10.077Z,1516683970.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:01:09.8Z 2018-01-23T05:06:10.077Z,1516683970.077 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:06:10.077Z,1516683970.077 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:06:10.472Z,1516683970.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:06:10.473Z,1516683970.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:10.984Z,1516683970.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:06:10.985Z,1516683970.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:11.269Z,1516683971.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:06:11.270Z,1516683971.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:14.385Z,1516683974.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:14.463Z,1516683974.463 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0044.lzma 2018-01-23T05:06:14.541Z,1516683974.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:14.914Z,1516683974.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:15.241Z,1516683975.241 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0044.lzma.bak 2018-01-23T05:06:15.241Z,1516683975.241 [DataOverHttps](INFO): SBD MOMSN=7755038 2018-01-23T05:06:15.296Z,1516683975.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:15.925Z,1516683975.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:16.105Z,1516683976.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:19.236Z,1516683979.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:19.392Z,1516683979.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:19.726Z,1516683979.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:20.108Z,1516683980.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:20.497Z,1516683980.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:20.901Z,1516683980.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:24.031Z,1516683984.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:24.096Z,1516683984.096 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0045.lzma 2018-01-23T05:06:24.172Z,1516683984.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:24.502Z,1516683984.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:24.853Z,1516683984.853 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0045.lzma.bak 2018-01-23T05:06:24.853Z,1516683984.853 [DataOverHttps](INFO): SBD MOMSN=7755041 2018-01-23T05:06:24.936Z,1516683984.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:25.530Z,1516683985.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:25.533Z,1516683985.533 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:06:25.533Z,1516683985.533 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:06:25.533Z,1516683985.533 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:06:25.724Z,1516683985.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:28.795Z,1516683988.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:28.937Z,1516683988.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:29.282Z,1516683989.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:29.714Z,1516683989.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:30.078Z,1516683990.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:30.481Z,1516683990.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:30.887Z,1516683990.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:31.281Z,1516683991.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:31.685Z,1516683991.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:32.088Z,1516683992.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:32.488Z,1516683992.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:32.864Z,1516683992.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:33.302Z,1516683993.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:33.663Z,1516683993.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:34.066Z,1516683994.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:34.468Z,1516683994.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:34.865Z,1516683994.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:35.264Z,1516683995.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:35.663Z,1516683995.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:36.066Z,1516683996.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:36.490Z,1516683996.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:36.853Z,1516683996.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:37.274Z,1516683997.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:37.670Z,1516683997.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:38.074Z,1516683998.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:38.470Z,1516683998.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:38.868Z,1516683998.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:39.270Z,1516683999.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:39.681Z,1516683999.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:40.081Z,1516684000.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:40.475Z,1516684000.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:40.867Z,1516684000.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:41.268Z,1516684001.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:41.677Z,1516684001.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:42.076Z,1516684002.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:42.480Z,1516684002.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:42.868Z,1516684002.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:43.269Z,1516684003.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:43.685Z,1516684003.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:44.077Z,1516684004.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:44.481Z,1516684004.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:44.868Z,1516684004.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:45.266Z,1516684005.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:45.683Z,1516684005.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:46.076Z,1516684006.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:46.477Z,1516684006.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:46.862Z,1516684006.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:47.264Z,1516684007.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:47.671Z,1516684007.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:48.074Z,1516684008.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:48.484Z,1516684008.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:48.882Z,1516684008.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:49.276Z,1516684009.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:49.673Z,1516684009.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:50.052Z,1516684010.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:50.456Z,1516684010.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:50.885Z,1516684010.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:51.284Z,1516684011.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:51.682Z,1516684011.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:52.081Z,1516684012.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:52.487Z,1516684012.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:52.857Z,1516684012.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:53.261Z,1516684013.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:53.662Z,1516684013.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:54.082Z,1516684014.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:54.490Z,1516684014.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:54.874Z,1516684014.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:55.260Z,1516684015.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:55.660Z,1516684015.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:56.059Z,1516684016.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:56.460Z,1516684016.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:56.862Z,1516684016.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:57.265Z,1516684017.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:57.662Z,1516684017.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:58.058Z,1516684018.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:58.464Z,1516684018.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:58.857Z,1516684018.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:59.258Z,1516684019.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:06:59.664Z,1516684019.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:00.062Z,1516684020.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:00.466Z,1516684020.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:00.868Z,1516684020.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:01.260Z,1516684021.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:01.658Z,1516684021.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:02.064Z,1516684022.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:02.458Z,1516684022.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:02.862Z,1516684022.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:03.265Z,1516684023.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:03.662Z,1516684023.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:04.058Z,1516684024.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:04.459Z,1516684024.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:04.858Z,1516684024.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:05.261Z,1516684025.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:05.660Z,1516684025.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:06.062Z,1516684026.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:06.466Z,1516684026.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:06.865Z,1516684026.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:07.259Z,1516684027.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:07.667Z,1516684027.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:08.060Z,1516684028.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:08.458Z,1516684028.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:08.869Z,1516684028.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:09.269Z,1516684029.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:09.669Z,1516684029.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:10.062Z,1516684030.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:10.460Z,1516684030.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:10.859Z,1516684030.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:11.268Z,1516684031.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:11.671Z,1516684031.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:12.070Z,1516684032.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:12.473Z,1516684032.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:12.869Z,1516684032.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:13.259Z,1516684033.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:13.660Z,1516684033.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:14.060Z,1516684034.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:14.458Z,1516684034.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:14.869Z,1516684034.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:15.273Z,1516684035.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:15.669Z,1516684035.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:16.065Z,1516684036.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:16.463Z,1516684036.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:16.861Z,1516684036.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:17.262Z,1516684037.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:17.672Z,1516684037.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:18.076Z,1516684038.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:18.481Z,1516684038.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:18.874Z,1516684038.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:19.262Z,1516684039.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:19.667Z,1516684039.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:20.063Z,1516684040.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:20.472Z,1516684040.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:20.877Z,1516684040.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:21.275Z,1516684041.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:21.672Z,1516684041.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:22.073Z,1516684042.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:22.462Z,1516684042.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:22.867Z,1516684042.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:23.264Z,1516684043.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:23.684Z,1516684043.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:24.075Z,1516684044.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:24.479Z,1516684044.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:24.878Z,1516684044.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:25.270Z,1516684045.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:25.672Z,1516684045.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:26.073Z,1516684046.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:29.146Z,1516684049.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:29.298Z,1516684049.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:29.649Z,1516684049.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:30.045Z,1516684050.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:30.433Z,1516684050.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:30.837Z,1516684050.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:31.236Z,1516684051.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:31.633Z,1516684051.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:32.043Z,1516684052.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:32.446Z,1516684052.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:32.843Z,1516684052.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:33.240Z,1516684053.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:33.644Z,1516684053.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:34.036Z,1516684054.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:34.440Z,1516684054.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:34.842Z,1516684054.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:35.253Z,1516684055.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:35.653Z,1516684055.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:36.035Z,1516684056.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:36.439Z,1516684056.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:36.839Z,1516684056.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:37.236Z,1516684057.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:37.640Z,1516684057.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:38.043Z,1516684058.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:38.446Z,1516684058.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:38.845Z,1516684058.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:39.239Z,1516684059.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:39.635Z,1516684059.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:40.034Z,1516684060.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:40.449Z,1516684060.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:40.842Z,1516684060.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:41.253Z,1516684061.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:41.642Z,1516684061.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:42.036Z,1516684062.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:42.439Z,1516684062.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:42.841Z,1516684062.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:43.244Z,1516684063.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:43.635Z,1516684063.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:44.050Z,1516684064.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:44.447Z,1516684064.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:44.852Z,1516684064.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:45.245Z,1516684065.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:45.636Z,1516684065.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:46.045Z,1516684066.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:46.437Z,1516684066.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:46.846Z,1516684066.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:47.247Z,1516684067.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:47.654Z,1516684067.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:48.052Z,1516684068.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:48.450Z,1516684068.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:48.848Z,1516684068.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:49.253Z,1516684069.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:49.621Z,1516684069.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:50.053Z,1516684070.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:50.454Z,1516684070.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:50.854Z,1516684070.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:51.237Z,1516684071.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:51.633Z,1516684071.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:52.037Z,1516684072.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:52.441Z,1516684072.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:52.838Z,1516684072.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:53.236Z,1516684073.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:53.638Z,1516684073.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:54.037Z,1516684074.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:54.431Z,1516684074.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:54.841Z,1516684074.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:55.243Z,1516684075.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:55.638Z,1516684075.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:56.046Z,1516684076.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:56.449Z,1516684076.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:56.853Z,1516684076.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:57.241Z,1516684077.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:57.641Z,1516684077.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:58.042Z,1516684078.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:58.445Z,1516684078.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:58.847Z,1516684078.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:59.252Z,1516684079.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:07:59.668Z,1516684079.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:00.050Z,1516684080.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:00.440Z,1516684080.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:00.861Z,1516684080.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:01.251Z,1516684081.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:01.648Z,1516684081.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:02.044Z,1516684082.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:02.441Z,1516684082.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:02.848Z,1516684082.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:03.253Z,1516684083.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:03.655Z,1516684083.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:04.042Z,1516684084.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:04.441Z,1516684084.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:04.848Z,1516684084.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:05.246Z,1516684085.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:05.662Z,1516684085.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:06.047Z,1516684086.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:06.437Z,1516684086.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:06.853Z,1516684086.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:07.257Z,1516684087.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:07.647Z,1516684087.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:08.052Z,1516684088.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:08.419Z,1516684088.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x21658 got:0x33974 2018-01-23T05:08:08.451Z,1516684088.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:08.851Z,1516684088.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:09.262Z,1516684089.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:09.649Z,1516684089.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:10.046Z,1516684090.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:10.429Z,1516684090.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:10.854Z,1516684090.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:11.250Z,1516684091.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:11.661Z,1516684091.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:12.030Z,1516684092.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:12.453Z,1516684092.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:12.856Z,1516684092.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:13.260Z,1516684093.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:13.657Z,1516684093.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:14.064Z,1516684094.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:14.435Z,1516684094.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:14.857Z,1516684094.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:15.254Z,1516684095.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:15.660Z,1516684095.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:16.037Z,1516684096.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:16.435Z,1516684096.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:16.863Z,1516684096.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:17.257Z,1516684097.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:17.632Z,1516684097.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x58432 got:0x45152 2018-01-23T05:08:17.657Z,1516684097.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:18.041Z,1516684098.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:18.427Z,1516684098.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x26226 got:0x32164 2018-01-23T05:08:18.464Z,1516684098.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:18.865Z,1516684098.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:19.259Z,1516684099.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:19.637Z,1516684099.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:20.035Z,1516684100.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:20.441Z,1516684100.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:20.836Z,1516684100.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:21.261Z,1516684101.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:21.662Z,1516684101.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:22.064Z,1516684102.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:22.433Z,1516684102.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:22.861Z,1516684102.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:23.259Z,1516684103.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:23.661Z,1516684103.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:24.035Z,1516684104.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:24.446Z,1516684104.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:24.843Z,1516684104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:25.268Z,1516684105.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:25.644Z,1516684105.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:26.036Z,1516684106.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:26.441Z,1516684106.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:29.535Z,1516684109.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:29.681Z,1516684109.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:30.045Z,1516684110.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:30.431Z,1516684110.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:30.797Z,1516684110.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:31.205Z,1516684111.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:31.612Z,1516684111.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:32.025Z,1516684112.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:32.418Z,1516684112.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:32.817Z,1516684112.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:33.216Z,1516684113.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:33.608Z,1516684113.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:34.023Z,1516684114.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:34.415Z,1516684114.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:34.813Z,1516684114.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:35.221Z,1516684115.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:35.618Z,1516684115.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:36.016Z,1516684116.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:36.412Z,1516684116.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:36.802Z,1516684116.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:37.206Z,1516684117.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:37.622Z,1516684117.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:38.016Z,1516684118.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:38.418Z,1516684118.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:38.813Z,1516684118.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:39.213Z,1516684119.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:39.611Z,1516684119.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:40.019Z,1516684120.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:40.409Z,1516684120.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:40.815Z,1516684120.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:41.212Z,1516684121.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:41.618Z,1516684121.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:42.024Z,1516684122.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:42.407Z,1516684122.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:42.812Z,1516684122.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:43.211Z,1516684123.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:43.629Z,1516684123.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:44.014Z,1516684124.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:44.422Z,1516684124.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:44.817Z,1516684124.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:45.213Z,1516684125.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:45.613Z,1516684125.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:46.018Z,1516684126.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:46.415Z,1516684126.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:46.815Z,1516684126.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:47.225Z,1516684127.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:47.614Z,1516684127.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:48.023Z,1516684128.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:48.417Z,1516684128.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:48.793Z,1516684128.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:49.196Z,1516684129.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:49.595Z,1516684129.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:50.026Z,1516684130.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:50.428Z,1516684130.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:50.832Z,1516684130.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:51.209Z,1516684131.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:51.604Z,1516684131.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.004Z,1516684132.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.404Z,1516684132.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.803Z,1516684132.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.803Z,1516684132.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-01-23T05:08:52.803Z,1516684132.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:08:52.805Z,1516684132.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.805Z,1516684132.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-01-23T05:08:52.805Z,1516684132.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:08:52.807Z,1516684132.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:52.807Z,1516684132.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38 2018-01-23T05:08:52.807Z,1516684132.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:08:52.831Z,1516684132.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:08:52.831Z,1516684132.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:08:52.832Z,1516684132.832 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:08:53.248Z,1516684133.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:08:53.248Z,1516684133.248 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-01-23T05:08:53.248Z,1516684133.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:08:53.248Z,1516684133.248 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-01-23T05:08:53.249Z,1516684133.249 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:08:53.249Z,1516684133.249 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38 2018-01-23T05:08:53.605Z,1516684133.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:08:53.605Z,1516684133.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:08:53.606Z,1516684133.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:08:53.606Z,1516684133.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:08:53.606Z,1516684133.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:08:53.607Z,1516684133.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:08:53.607Z,1516684133.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:08:53.608Z,1516684133.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:08:53.608Z,1516684133.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:08:54.016Z,1516684134.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:08:54.017Z,1516684134.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:54.403Z,1516684134.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:08:54.404Z,1516684134.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:54.802Z,1516684134.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:08:54.803Z,1516684134.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:55.211Z,1516684135.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:08:55.212Z,1516684135.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:55.612Z,1516684135.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:08:55.612Z,1516684135.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:56.015Z,1516684136.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:08:56.016Z,1516684136.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:56.421Z,1516684136.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:08:56.422Z,1516684136.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:56.814Z,1516684136.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:08:56.815Z,1516684136.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:57.212Z,1516684137.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:08:57.213Z,1516684137.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:57.611Z,1516684137.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:08:57.612Z,1516684137.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:58.016Z,1516684138.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:08:58.017Z,1516684138.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:58.408Z,1516684138.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:08:58.409Z,1516684138.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:58.814Z,1516684138.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:08:58.815Z,1516684138.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:59.229Z,1516684139.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:08:59.230Z,1516684139.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:08:59.623Z,1516684139.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:08:59.624Z,1516684139.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:00.023Z,1516684140.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:09:00.024Z,1516684140.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:00.415Z,1516684140.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:09:00.416Z,1516684140.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:00.814Z,1516684140.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:09:00.815Z,1516684140.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:01.212Z,1516684141.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:09:01.212Z,1516684141.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:01.621Z,1516684141.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:09:01.622Z,1516684141.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:02.020Z,1516684142.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:09:02.021Z,1516684142.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:02.427Z,1516684142.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:09:02.428Z,1516684142.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:02.818Z,1516684142.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:09:02.819Z,1516684142.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:03.220Z,1516684143.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:09:03.221Z,1516684143.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:03.620Z,1516684143.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:09:03.621Z,1516684143.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:04.024Z,1516684144.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:09:04.025Z,1516684144.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:04.404Z,1516684144.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:09:04.405Z,1516684144.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:04.802Z,1516684144.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:09:04.803Z,1516684144.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:05.210Z,1516684145.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:09:05.211Z,1516684145.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:05.609Z,1516684145.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:09:05.610Z,1516684145.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:06.006Z,1516684146.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:09:06.007Z,1516684146.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:06.409Z,1516684146.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:09:06.410Z,1516684146.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:06.804Z,1516684146.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:09:06.804Z,1516684146.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:07.205Z,1516684147.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:09:07.206Z,1516684147.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:07.604Z,1516684147.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:09:07.605Z,1516684147.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:08.016Z,1516684148.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:09:08.017Z,1516684148.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:08.413Z,1516684148.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:09:08.414Z,1516684148.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:08.810Z,1516684148.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:09:08.811Z,1516684148.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:09.205Z,1516684149.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:09:09.206Z,1516684149.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:09.609Z,1516684149.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:09:09.610Z,1516684149.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:10.009Z,1516684150.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:09:10.010Z,1516684150.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:10.407Z,1516684150.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:09:10.408Z,1516684150.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:10.816Z,1516684150.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:09:10.817Z,1516684150.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:11.220Z,1516684151.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:09:11.221Z,1516684151.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:11.618Z,1516684151.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:09:11.619Z,1516684151.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:12.024Z,1516684152.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:09:12.025Z,1516684152.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:12.415Z,1516684152.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:09:12.416Z,1516684152.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:12.813Z,1516684152.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:13.201Z,1516684153.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:13.600Z,1516684153.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:14.028Z,1516684154.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:14.434Z,1516684154.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:14.811Z,1516684154.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:15.203Z,1516684155.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:15.602Z,1516684155.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:16.009Z,1516684156.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:16.405Z,1516684156.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:16.809Z,1516684156.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:17.209Z,1516684157.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:17.610Z,1516684157.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:18.013Z,1516684158.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:18.407Z,1516684158.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:18.806Z,1516684158.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:19.204Z,1516684159.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:19.604Z,1516684159.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:20.014Z,1516684160.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:20.417Z,1516684160.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:20.813Z,1516684160.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:21.213Z,1516684161.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:21.603Z,1516684161.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:22.003Z,1516684162.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:22.405Z,1516684162.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:22.806Z,1516684162.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:23.214Z,1516684163.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:23.621Z,1516684163.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:24.021Z,1516684164.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:24.412Z,1516684164.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:24.805Z,1516684164.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:25.205Z,1516684165.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:25.604Z,1516684165.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:26.013Z,1516684166.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:26.418Z,1516684166.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:26.814Z,1516684166.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:29.898Z,1516684169.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:30.052Z,1516684170.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:30.373Z,1516684170.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:30.798Z,1516684170.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:31.170Z,1516684171.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:31.569Z,1516684171.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:31.969Z,1516684171.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:32.367Z,1516684172.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:32.765Z,1516684172.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:33.181Z,1516684173.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:33.573Z,1516684173.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:33.973Z,1516684173.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:34.368Z,1516684174.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:34.762Z,1516684174.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:35.166Z,1516684175.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:35.571Z,1516684175.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:35.973Z,1516684175.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:36.381Z,1516684176.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:36.775Z,1516684176.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:37.166Z,1516684177.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:37.571Z,1516684177.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:37.989Z,1516684177.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:38.385Z,1516684178.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:38.774Z,1516684178.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:39.177Z,1516684179.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:39.573Z,1516684179.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:39.977Z,1516684179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:40.388Z,1516684180.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:40.778Z,1516684180.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:41.168Z,1516684181.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:41.582Z,1516684181.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:41.976Z,1516684181.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:42.388Z,1516684182.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:42.788Z,1516684182.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:43.157Z,1516684183.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:43.561Z,1516684183.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:43.987Z,1516684183.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:44.385Z,1516684184.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:44.789Z,1516684184.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:45.185Z,1516684185.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:45.562Z,1516684185.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:45.995Z,1516684185.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:46.395Z,1516684186.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:46.772Z,1516684186.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:47.173Z,1516684187.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:47.566Z,1516684187.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:47.970Z,1516684187.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:48.377Z,1516684188.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:48.781Z,1516684188.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:49.169Z,1516684189.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:49.563Z,1516684189.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:49.981Z,1516684189.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:50.385Z,1516684190.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:50.785Z,1516684190.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:51.168Z,1516684191.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:51.571Z,1516684191.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:51.974Z,1516684191.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:52.378Z,1516684192.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:52.775Z,1516684192.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:53.171Z,1516684193.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:53.575Z,1516684193.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:53.977Z,1516684193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:54.377Z,1516684194.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:54.785Z,1516684194.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:55.168Z,1516684195.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:55.572Z,1516684195.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:55.978Z,1516684195.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:56.389Z,1516684196.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:56.785Z,1516684196.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:57.172Z,1516684197.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:57.573Z,1516684197.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:57.974Z,1516684197.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:58.377Z,1516684198.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:58.774Z,1516684198.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:59.165Z,1516684199.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:59.575Z,1516684199.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:09:59.977Z,1516684199.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:00.377Z,1516684200.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:00.783Z,1516684200.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:01.171Z,1516684201.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:01.571Z,1516684201.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:01.975Z,1516684201.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:02.375Z,1516684202.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:02.777Z,1516684202.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:03.183Z,1516684203.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:03.569Z,1516684203.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:03.971Z,1516684203.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:04.376Z,1516684204.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:04.773Z,1516684204.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:05.175Z,1516684205.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:05.578Z,1516684205.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:05.974Z,1516684205.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:06.371Z,1516684206.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:06.776Z,1516684206.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:07.173Z,1516684207.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:07.571Z,1516684207.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:07.975Z,1516684207.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:08.377Z,1516684208.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:08.777Z,1516684208.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:09.178Z,1516684209.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:09.569Z,1516684209.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:09.964Z,1516684209.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:10.376Z,1516684210.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:10.777Z,1516684210.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:11.178Z,1516684211.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:11.583Z,1516684211.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:11.982Z,1516684211.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:12.389Z,1516684212.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:12.763Z,1516684212.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:13.164Z,1516684213.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:13.565Z,1516684213.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:13.962Z,1516684213.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:14.370Z,1516684214.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:14.774Z,1516684214.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:15.176Z,1516684215.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:15.564Z,1516684215.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:15.964Z,1516684215.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:16.365Z,1516684216.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:16.768Z,1516684216.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:17.166Z,1516684217.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:17.570Z,1516684217.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:17.996Z,1516684217.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:18.362Z,1516684218.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:18.764Z,1516684218.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:19.165Z,1516684219.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:19.568Z,1516684219.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:19.964Z,1516684219.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:20.374Z,1516684220.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:20.777Z,1516684220.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:21.174Z,1516684221.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:21.564Z,1516684221.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:21.972Z,1516684221.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:22.367Z,1516684222.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:22.765Z,1516684222.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:23.175Z,1516684223.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:23.580Z,1516684223.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:23.978Z,1516684223.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:24.371Z,1516684224.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:24.777Z,1516684224.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:25.177Z,1516684225.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:25.572Z,1516684225.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:25.976Z,1516684225.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:26.385Z,1516684226.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:26.781Z,1516684226.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:27.190Z,1516684227.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:30.266Z,1516684230.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:30.417Z,1516684230.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:30.740Z,1516684230.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:31.149Z,1516684231.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:31.545Z,1516684231.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:31.934Z,1516684231.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:32.333Z,1516684232.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:32.731Z,1516684232.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:33.141Z,1516684233.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:33.541Z,1516684233.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:33.941Z,1516684233.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:34.337Z,1516684234.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:34.731Z,1516684234.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:35.131Z,1516684235.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:35.539Z,1516684235.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:35.932Z,1516684235.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:36.341Z,1516684236.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:36.738Z,1516684236.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:37.137Z,1516684237.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:37.531Z,1516684237.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:37.930Z,1516684237.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:38.332Z,1516684238.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:38.737Z,1516684238.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:39.141Z,1516684239.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:39.541Z,1516684239.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:39.938Z,1516684239.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:40.330Z,1516684240.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:40.731Z,1516684240.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:41.130Z,1516684241.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:41.539Z,1516684241.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:41.931Z,1516684241.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:42.342Z,1516684242.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:42.749Z,1516684242.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:43.142Z,1516684243.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:43.541Z,1516684243.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:43.945Z,1516684243.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:44.332Z,1516684244.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:44.733Z,1516684244.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:45.141Z,1516684245.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:45.545Z,1516684245.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:45.949Z,1516684245.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:46.333Z,1516684246.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:46.736Z,1516684246.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:47.135Z,1516684247.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:47.533Z,1516684247.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:47.936Z,1516684247.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:48.341Z,1516684248.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:48.744Z,1516684248.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:49.142Z,1516684249.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:49.535Z,1516684249.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:49.933Z,1516684249.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:50.336Z,1516684250.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:50.741Z,1516684250.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:51.146Z,1516684251.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:51.545Z,1516684251.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:51.945Z,1516684251.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:52.337Z,1516684252.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:52.735Z,1516684252.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:53.135Z,1516684253.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:53.533Z,1516684253.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:53.943Z,1516684253.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:54.349Z,1516684254.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:54.746Z,1516684254.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:55.142Z,1516684255.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:55.534Z,1516684255.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:55.943Z,1516684255.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:56.337Z,1516684256.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:56.733Z,1516684256.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:57.141Z,1516684257.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:57.546Z,1516684257.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:57.945Z,1516684257.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:58.333Z,1516684258.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:58.740Z,1516684258.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:59.145Z,1516684259.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:59.542Z,1516684259.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:10:59.935Z,1516684259.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:00.343Z,1516684260.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:00.747Z,1516684260.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:01.152Z,1516684261.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:01.534Z,1516684261.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:01.944Z,1516684261.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:02.351Z,1516684262.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:02.742Z,1516684262.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:03.153Z,1516684263.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:03.549Z,1516684263.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:03.949Z,1516684263.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:04.344Z,1516684264.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:04.753Z,1516684264.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:05.133Z,1516684265.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:05.542Z,1516684265.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:05.940Z,1516684265.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:06.350Z,1516684266.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:06.746Z,1516684266.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:07.144Z,1516684267.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:07.539Z,1516684267.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:07.949Z,1516684267.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:08.336Z,1516684268.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:08.740Z,1516684268.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:09.150Z,1516684269.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:09.555Z,1516684269.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:09.950Z,1516684269.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:10.337Z,1516684270.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:10.745Z,1516684270.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:11.145Z,1516684271.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:11.544Z,1516684271.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:11.945Z,1516684271.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:12.349Z,1516684272.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:12.753Z,1516684272.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:13.156Z,1516684273.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:13.539Z,1516684273.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:13.918Z,1516684273.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x31874 got:0x33963 2018-01-23T05:11:13.943Z,1516684273.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:14.344Z,1516684274.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:14.747Z,1516684274.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:15.145Z,1516684275.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:15.547Z,1516684275.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:15.944Z,1516684275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:16.344Z,1516684276.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:16.743Z,1516684276.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:17.153Z,1516684277.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:17.546Z,1516684277.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:17.959Z,1516684277.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:18.341Z,1516684278.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:18.742Z,1516684278.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:19.159Z,1516684279.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:19.551Z,1516684279.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:19.951Z,1516684279.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:20.348Z,1516684280.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:20.716Z,1516684280.716 [PNI_TCM](ERROR): CRC does not match. Expected:0x34908 got:0x1857 2018-01-23T05:11:20.752Z,1516684280.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:21.149Z,1516684281.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:21.561Z,1516684281.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:21.957Z,1516684281.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:22.347Z,1516684282.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:22.749Z,1516684282.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:23.147Z,1516684283.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:23.555Z,1516684283.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:23.957Z,1516684283.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:24.326Z,1516684284.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:24.756Z,1516684284.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:25.151Z,1516684285.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:25.555Z,1516684285.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:25.951Z,1516684285.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:25.954Z,1516684285.954 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:11:25.954Z,1516684285.954 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:11:25.954Z,1516684285.954 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:11:25.954Z,1516684285.954 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:11:26.354Z,1516684286.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:26.357Z,1516684286.357 [Default:CheckIn:D] Stopped 2018-01-23T05:11:26.357Z,1516684286.357 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:11:26.721Z,1516684286.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:26.727Z,1516684286.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.571631 min 2018-01-23T05:11:26.728Z,1516684286.728 [Default:CheckIn:E] Stopped 2018-01-23T05:11:26.728Z,1516684286.728 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:11:26.728Z,1516684286.728 [Default:CheckIn] Stopped 2018-01-23T05:11:26.728Z,1516684286.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:11:26.728Z,1516684286.728 [Default:CheckIn](INFO): Running loop #12 2018-01-23T05:11:26.729Z,1516684286.729 [Default:CheckIn] Running Loop=12 2018-01-23T05:11:26.729Z,1516684286.729 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:11:26.729Z,1516684286.729 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:11:27.152Z,1516684287.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:27.560Z,1516684287.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:30.627Z,1516684290.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:30.758Z,1516684290.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:31.115Z,1516684291.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:31.517Z,1516684291.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:31.916Z,1516684291.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:32.323Z,1516684292.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:32.723Z,1516684292.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:33.127Z,1516684293.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:33.517Z,1516684293.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:33.926Z,1516684293.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:34.320Z,1516684294.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:34.720Z,1516684294.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:35.139Z,1516684295.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:35.531Z,1516684295.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:35.929Z,1516684295.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:36.325Z,1516684296.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:36.698Z,1516684296.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:37.120Z,1516684297.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:37.537Z,1516684297.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:37.929Z,1516684297.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:38.330Z,1516684298.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:38.708Z,1516684298.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:39.101Z,1516684299.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:39.513Z,1516684299.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:39.908Z,1516684299.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:40.315Z,1516684300.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:40.715Z,1516684300.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:41.114Z,1516684301.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:41.508Z,1516684301.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:41.908Z,1516684301.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:42.308Z,1516684302.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:42.709Z,1516684302.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:43.106Z,1516684303.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:43.520Z,1516684303.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:43.914Z,1516684303.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:44.317Z,1516684304.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:44.708Z,1516684304.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:45.107Z,1516684305.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:45.516Z,1516684305.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:45.916Z,1516684305.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:46.317Z,1516684306.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:46.721Z,1516684306.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:47.118Z,1516684307.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:47.506Z,1516684307.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:47.910Z,1516684307.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:48.317Z,1516684308.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:48.710Z,1516684308.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:49.114Z,1516684309.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:49.518Z,1516684309.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:49.922Z,1516684309.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:50.319Z,1516684310.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:50.719Z,1516684310.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:51.109Z,1516684311.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:51.510Z,1516684311.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:51.920Z,1516684311.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:52.320Z,1516684312.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:52.723Z,1516684312.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.130Z,1516684313.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.515Z,1516684313.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.919Z,1516684313.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.919Z,1516684313.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-01-23T05:11:53.919Z,1516684313.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:11:53.921Z,1516684313.921 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.921Z,1516684313.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-01-23T05:11:53.921Z,1516684313.921 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:11:53.923Z,1516684313.923 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:53.923Z,1516684313.923 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39 2018-01-23T05:11:53.923Z,1516684313.923 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:11:53.935Z,1516684313.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:11:53.935Z,1516684313.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:11:53.936Z,1516684313.936 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:11:54.334Z,1516684314.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:11:54.334Z,1516684314.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-01-23T05:11:54.335Z,1516684314.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:11:54.335Z,1516684314.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-01-23T05:11:54.335Z,1516684314.335 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:11:54.335Z,1516684314.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39 2018-01-23T05:11:54.708Z,1516684314.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:11:54.709Z,1516684314.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:11:54.709Z,1516684314.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:11:54.709Z,1516684314.709 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:11:54.710Z,1516684314.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:11:54.710Z,1516684314.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:11:54.710Z,1516684314.710 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:11:54.711Z,1516684314.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:11:54.711Z,1516684314.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:11:55.119Z,1516684315.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:11:55.120Z,1516684315.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:55.522Z,1516684315.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:11:55.523Z,1516684315.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:55.923Z,1516684315.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:11:55.924Z,1516684315.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:56.328Z,1516684316.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:11:56.329Z,1516684316.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:56.717Z,1516684316.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:11:56.718Z,1516684316.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:57.105Z,1516684317.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:11:57.106Z,1516684317.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:57.507Z,1516684317.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:11:57.508Z,1516684317.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:57.898Z,1516684317.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:11:57.899Z,1516684317.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:58.322Z,1516684318.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:11:58.327Z,1516684318.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:58.736Z,1516684318.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:11:58.737Z,1516684318.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:59.133Z,1516684319.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:11:59.134Z,1516684319.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:59.503Z,1516684319.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:11:59.504Z,1516684319.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:11:59.912Z,1516684319.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:11:59.913Z,1516684319.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:00.308Z,1516684320.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:12:00.309Z,1516684320.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:00.708Z,1516684320.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:12:00.709Z,1516684320.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:01.108Z,1516684321.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:12:01.109Z,1516684321.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:01.509Z,1516684321.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:12:01.510Z,1516684321.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:01.937Z,1516684321.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:12:01.938Z,1516684321.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:02.310Z,1516684322.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:12:02.311Z,1516684322.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:02.712Z,1516684322.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:12:02.713Z,1516684322.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:03.103Z,1516684323.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:12:03.104Z,1516684323.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:03.507Z,1516684323.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:12:03.508Z,1516684323.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:03.912Z,1516684323.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:12:03.913Z,1516684323.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:04.322Z,1516684324.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:12:04.343Z,1516684324.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:04.717Z,1516684324.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:12:04.718Z,1516684324.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:05.113Z,1516684325.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:12:05.113Z,1516684325.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:05.506Z,1516684325.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:12:05.507Z,1516684325.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:05.914Z,1516684325.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:12:05.915Z,1516684325.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:06.307Z,1516684326.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:12:06.308Z,1516684326.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:06.706Z,1516684326.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:12:06.707Z,1516684326.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:07.115Z,1516684327.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:12:07.116Z,1516684327.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:07.513Z,1516684327.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:12:07.514Z,1516684327.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:07.913Z,1516684327.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:12:07.914Z,1516684327.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:08.316Z,1516684328.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:12:08.317Z,1516684328.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:08.712Z,1516684328.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:12:08.713Z,1516684328.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:09.108Z,1516684329.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:12:09.109Z,1516684329.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:09.510Z,1516684329.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:12:09.511Z,1516684329.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:09.908Z,1516684329.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:12:09.909Z,1516684329.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:10.314Z,1516684330.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:12:10.315Z,1516684330.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:10.720Z,1516684330.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:12:10.721Z,1516684330.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:11.118Z,1516684331.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:12:11.119Z,1516684331.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:11.510Z,1516684331.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:12:11.512Z,1516684331.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:11.916Z,1516684331.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:12:11.917Z,1516684331.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:12.310Z,1516684332.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:12:12.311Z,1516684332.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:12.709Z,1516684332.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:12:12.710Z,1516684332.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:13.110Z,1516684333.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:12:13.111Z,1516684333.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:13.524Z,1516684333.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:12:13.525Z,1516684333.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:13.918Z,1516684333.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:12:13.919Z,1516684333.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:14.318Z,1516684334.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:14.709Z,1516684334.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:15.111Z,1516684335.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:15.512Z,1516684335.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:15.913Z,1516684335.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:16.320Z,1516684336.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:16.722Z,1516684336.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:17.125Z,1516684337.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:17.516Z,1516684337.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:17.912Z,1516684337.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:18.316Z,1516684338.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:18.710Z,1516684338.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:19.117Z,1516684339.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:19.523Z,1516684339.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:19.921Z,1516684339.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:20.319Z,1516684340.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:20.720Z,1516684340.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:21.117Z,1516684341.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:21.513Z,1516684341.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:21.910Z,1516684341.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:22.318Z,1516684342.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:22.726Z,1516684342.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:23.120Z,1516684343.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:23.509Z,1516684343.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:23.919Z,1516684343.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:24.321Z,1516684344.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:24.719Z,1516684344.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:25.119Z,1516684345.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:25.538Z,1516684345.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:25.925Z,1516684345.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:26.327Z,1516684346.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:26.721Z,1516684346.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:27.097Z,1516684347.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:27.500Z,1516684347.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:27.900Z,1516684347.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:31.027Z,1516684351.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:31.176Z,1516684351.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:31.510Z,1516684351.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:31.913Z,1516684351.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:32.304Z,1516684352.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:32.705Z,1516684352.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:33.113Z,1516684353.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:33.508Z,1516684353.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:33.910Z,1516684353.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:34.313Z,1516684354.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:34.706Z,1516684354.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:35.104Z,1516684355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:35.507Z,1516684355.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:35.902Z,1516684355.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:36.316Z,1516684356.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:36.710Z,1516684356.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:37.117Z,1516684357.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:37.508Z,1516684357.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:37.913Z,1516684357.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:38.307Z,1516684358.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:38.705Z,1516684358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:39.103Z,1516684359.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:39.512Z,1516684359.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:39.913Z,1516684359.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:40.317Z,1516684360.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:40.706Z,1516684360.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:41.104Z,1516684361.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:41.507Z,1516684361.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:41.903Z,1516684361.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:42.320Z,1516684362.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:42.725Z,1516684362.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:43.117Z,1516684363.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:43.509Z,1516684363.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:43.909Z,1516684363.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:44.304Z,1516684364.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:44.706Z,1516684364.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:45.106Z,1516684365.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:45.513Z,1516684365.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:45.917Z,1516684365.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:46.313Z,1516684366.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:46.703Z,1516684366.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:47.105Z,1516684367.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:47.508Z,1516684367.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:47.906Z,1516684367.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:48.317Z,1516684368.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:48.734Z,1516684368.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:49.115Z,1516684369.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:49.518Z,1516684369.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:49.913Z,1516684369.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:50.312Z,1516684370.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:50.698Z,1516684370.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:51.125Z,1516684371.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:51.525Z,1516684371.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:51.937Z,1516684371.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:52.328Z,1516684372.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:52.700Z,1516684372.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:53.109Z,1516684373.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:53.509Z,1516684373.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:53.904Z,1516684373.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:54.307Z,1516684374.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:54.711Z,1516684374.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:55.117Z,1516684375.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:55.513Z,1516684375.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:55.908Z,1516684375.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:56.303Z,1516684376.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:56.709Z,1516684376.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:57.109Z,1516684377.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:57.509Z,1516684377.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:57.917Z,1516684377.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:58.313Z,1516684378.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:58.703Z,1516684378.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:59.103Z,1516684379.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:59.510Z,1516684379.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:12:59.903Z,1516684379.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:00.314Z,1516684380.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:00.721Z,1516684380.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:01.116Z,1516684381.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:01.503Z,1516684381.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:01.907Z,1516684381.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:02.303Z,1516684382.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:02.709Z,1516684382.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:03.106Z,1516684383.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:03.513Z,1516684383.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:03.920Z,1516684383.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:04.314Z,1516684384.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:04.703Z,1516684384.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:05.112Z,1516684385.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:05.508Z,1516684385.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:05.903Z,1516684385.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:06.314Z,1516684386.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:06.718Z,1516684386.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:07.113Z,1516684387.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:07.513Z,1516684387.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:07.909Z,1516684387.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:08.314Z,1516684388.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:08.716Z,1516684388.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:09.114Z,1516684389.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:09.503Z,1516684389.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:09.911Z,1516684389.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:10.325Z,1516684390.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:10.716Z,1516684390.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:11.114Z,1516684391.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:11.508Z,1516684391.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:11.904Z,1516684391.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:12.319Z,1516684392.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:12.721Z,1516684392.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:13.113Z,1516684393.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:13.504Z,1516684393.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:13.906Z,1516684393.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:14.314Z,1516684394.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:14.723Z,1516684394.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:15.114Z,1516684395.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:15.506Z,1516684395.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:15.913Z,1516684395.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:16.314Z,1516684396.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:16.720Z,1516684396.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:17.120Z,1516684397.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:17.513Z,1516684397.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:17.905Z,1516684397.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:18.314Z,1516684398.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:18.718Z,1516684398.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:19.115Z,1516684399.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:19.511Z,1516684399.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:19.917Z,1516684399.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:20.317Z,1516684400.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:20.725Z,1516684400.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:21.114Z,1516684401.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:21.505Z,1516684401.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:21.905Z,1516684401.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:22.314Z,1516684402.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:22.717Z,1516684402.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:23.124Z,1516684403.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:23.513Z,1516684403.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:23.911Z,1516684403.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:24.314Z,1516684404.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:24.718Z,1516684404.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:25.115Z,1516684405.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:25.514Z,1516684405.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:25.906Z,1516684405.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:26.313Z,1516684406.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:26.725Z,1516684406.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:27.119Z,1516684407.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:27.512Z,1516684407.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:27.917Z,1516684407.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:28.326Z,1516684408.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:31.409Z,1516684411.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:31.557Z,1516684411.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:31.877Z,1516684411.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:32.279Z,1516684412.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:32.681Z,1516684412.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:33.081Z,1516684413.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:33.482Z,1516684413.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:33.889Z,1516684413.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:34.285Z,1516684414.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:34.684Z,1516684414.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:35.075Z,1516684415.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:35.479Z,1516684415.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:35.877Z,1516684415.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:36.277Z,1516684416.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:36.689Z,1516684416.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:37.085Z,1516684417.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:37.486Z,1516684417.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:37.878Z,1516684417.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:38.280Z,1516684418.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:38.681Z,1516684418.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:39.077Z,1516684419.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:39.486Z,1516684419.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:39.893Z,1516684419.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:40.285Z,1516684420.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:40.680Z,1516684420.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:41.075Z,1516684421.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:41.477Z,1516684421.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:41.880Z,1516684421.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:42.279Z,1516684422.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:42.685Z,1516684422.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:43.088Z,1516684423.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:43.485Z,1516684423.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:43.878Z,1516684423.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:44.284Z,1516684424.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:44.680Z,1516684424.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:45.077Z,1516684425.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:45.486Z,1516684425.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:45.885Z,1516684425.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:46.285Z,1516684426.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:46.680Z,1516684426.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:47.077Z,1516684427.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:47.479Z,1516684427.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:47.880Z,1516684427.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:48.279Z,1516684428.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:48.687Z,1516684428.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:49.090Z,1516684429.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:49.486Z,1516684429.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:49.883Z,1516684429.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:50.284Z,1516684430.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:50.680Z,1516684430.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:51.083Z,1516684431.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:51.486Z,1516684431.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:51.887Z,1516684431.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:52.290Z,1516684432.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:52.679Z,1516684432.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:53.077Z,1516684433.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:53.481Z,1516684433.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:53.893Z,1516684433.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:54.281Z,1516684434.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:54.688Z,1516684434.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:55.102Z,1516684435.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:55.486Z,1516684435.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:55.885Z,1516684435.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:56.288Z,1516684436.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:56.668Z,1516684436.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:57.073Z,1516684437.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:57.498Z,1516684437.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:57.905Z,1516684437.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:58.296Z,1516684438.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:58.697Z,1516684438.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:59.073Z,1516684439.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:59.481Z,1516684439.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:13:59.877Z,1516684439.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:00.275Z,1516684440.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:00.705Z,1516684440.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:01.082Z,1516684441.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:01.478Z,1516684441.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:01.874Z,1516684441.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:02.278Z,1516684442.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:02.677Z,1516684442.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:03.075Z,1516684443.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:03.479Z,1516684443.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:03.882Z,1516684443.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:04.290Z,1516684444.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:04.682Z,1516684444.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:05.078Z,1516684445.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:05.476Z,1516684445.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:05.891Z,1516684445.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:06.277Z,1516684446.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:06.685Z,1516684446.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:07.088Z,1516684447.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:07.486Z,1516684447.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:07.880Z,1516684447.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:08.278Z,1516684448.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:08.676Z,1516684448.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:09.082Z,1516684449.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:09.487Z,1516684449.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:09.890Z,1516684449.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:10.287Z,1516684450.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:10.681Z,1516684450.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:11.081Z,1516684451.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:11.482Z,1516684451.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:11.893Z,1516684451.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:12.286Z,1516684452.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:12.690Z,1516684452.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:13.091Z,1516684453.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:13.501Z,1516684453.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:13.889Z,1516684453.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:14.291Z,1516684454.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:14.676Z,1516684454.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:14.702Z,1516684454.702 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:14:15.089Z,1516684455.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:15.495Z,1516684455.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:15.892Z,1516684455.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:16.290Z,1516684456.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:16.675Z,1516684456.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:17.081Z,1516684457.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:17.481Z,1516684457.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:17.876Z,1516684457.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:18.276Z,1516684458.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:18.695Z,1516684458.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:19.082Z,1516684459.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:19.490Z,1516684459.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:19.881Z,1516684459.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:20.276Z,1516684460.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:20.677Z,1516684460.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:21.074Z,1516684461.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:21.482Z,1516684461.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:21.882Z,1516684461.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:22.289Z,1516684462.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:22.679Z,1516684462.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:23.085Z,1516684463.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:23.481Z,1516684463.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:23.876Z,1516684463.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:24.274Z,1516684464.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:24.685Z,1516684464.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:25.082Z,1516684465.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:25.482Z,1516684465.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:25.874Z,1516684465.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:26.285Z,1516684466.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:26.676Z,1516684466.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:27.075Z,1516684467.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:27.488Z,1516684467.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:27.882Z,1516684467.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:28.285Z,1516684468.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:28.677Z,1516684468.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:31.781Z,1516684471.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:31.889Z,1516684471.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:32.285Z,1516684472.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:32.686Z,1516684472.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:33.078Z,1516684473.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:33.477Z,1516684473.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:33.878Z,1516684473.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:34.285Z,1516684474.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:34.677Z,1516684474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:35.085Z,1516684475.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:35.489Z,1516684475.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:35.875Z,1516684475.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:36.277Z,1516684476.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:36.675Z,1516684476.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:37.071Z,1516684477.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:37.489Z,1516684477.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:37.889Z,1516684477.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:38.285Z,1516684478.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:38.673Z,1516684478.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:39.085Z,1516684479.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:39.475Z,1516684479.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:39.875Z,1516684479.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:40.276Z,1516684480.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:40.689Z,1516684480.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:41.090Z,1516684481.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:41.487Z,1516684481.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:41.876Z,1516684481.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:42.274Z,1516684482.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:42.682Z,1516684482.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:43.077Z,1516684483.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:43.495Z,1516684483.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:43.883Z,1516684483.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:44.295Z,1516684484.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:44.685Z,1516684484.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:45.085Z,1516684485.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:45.478Z,1516684485.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:45.880Z,1516684485.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:46.283Z,1516684486.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:46.684Z,1516684486.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:47.086Z,1516684487.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:47.491Z,1516684487.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:47.882Z,1516684487.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:48.278Z,1516684488.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:48.683Z,1516684488.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:49.079Z,1516684489.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:49.485Z,1516684489.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:49.893Z,1516684489.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:50.292Z,1516684490.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:50.665Z,1516684490.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:51.088Z,1516684491.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:51.470Z,1516684491.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:51.875Z,1516684491.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:52.281Z,1516684492.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:52.709Z,1516684492.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:53.076Z,1516684493.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:53.481Z,1516684493.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:53.874Z,1516684493.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:54.272Z,1516684494.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:54.672Z,1516684494.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:55.073Z,1516684495.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:55.073Z,1516684495.073 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-01-23T05:14:55.073Z,1516684495.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:14:55.075Z,1516684495.075 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:55.075Z,1516684495.075 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-01-23T05:14:55.075Z,1516684495.075 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:14:55.076Z,1516684495.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:55.077Z,1516684495.077 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40 2018-01-23T05:14:55.077Z,1516684495.077 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:14:55.109Z,1516684495.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:14:55.110Z,1516684495.110 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:14:55.110Z,1516684495.110 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:14:55.512Z,1516684495.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:14:55.512Z,1516684495.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-01-23T05:14:55.512Z,1516684495.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:14:55.512Z,1516684495.512 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-01-23T05:14:55.513Z,1516684495.513 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:14:55.513Z,1516684495.513 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40 2018-01-23T05:14:55.880Z,1516684495.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:14:55.880Z,1516684495.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:14:55.881Z,1516684495.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:14:55.881Z,1516684495.881 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:14:55.881Z,1516684495.881 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:14:55.882Z,1516684495.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:14:55.882Z,1516684495.882 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:14:55.883Z,1516684495.883 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:14:55.883Z,1516684495.883 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:14:56.284Z,1516684496.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:14:56.285Z,1516684496.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:56.682Z,1516684496.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:14:56.684Z,1516684496.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:57.074Z,1516684497.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:14:57.075Z,1516684497.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:57.488Z,1516684497.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:14:57.489Z,1516684497.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:57.889Z,1516684497.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:14:57.890Z,1516684497.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:58.288Z,1516684498.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:14:58.289Z,1516684498.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:58.673Z,1516684498.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:14:58.674Z,1516684498.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:59.077Z,1516684499.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:14:59.078Z,1516684499.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:59.482Z,1516684499.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:14:59.484Z,1516684499.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:14:59.884Z,1516684499.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:14:59.885Z,1516684499.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:00.286Z,1516684500.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:15:00.287Z,1516684500.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:00.674Z,1516684500.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:15:00.679Z,1516684500.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:01.083Z,1516684501.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:15:01.084Z,1516684501.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:01.501Z,1516684501.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:15:01.502Z,1516684501.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:01.892Z,1516684501.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:15:01.893Z,1516684501.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:02.288Z,1516684502.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:15:02.289Z,1516684502.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:02.692Z,1516684502.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:15:02.693Z,1516684502.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:03.082Z,1516684503.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:15:03.087Z,1516684503.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:03.496Z,1516684503.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:15:03.497Z,1516684503.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:03.889Z,1516684503.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:15:03.890Z,1516684503.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:04.291Z,1516684504.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:15:04.292Z,1516684504.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:04.684Z,1516684504.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:15:04.685Z,1516684504.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:05.092Z,1516684505.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:15:05.093Z,1516684505.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:05.485Z,1516684505.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x9171 got:0x54043 2018-01-23T05:15:05.512Z,1516684505.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:15:05.513Z,1516684505.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:05.892Z,1516684505.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:15:05.893Z,1516684505.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:06.290Z,1516684506.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:15:06.291Z,1516684506.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:06.682Z,1516684506.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:15:06.683Z,1516684506.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:07.086Z,1516684507.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:15:07.087Z,1516684507.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:07.488Z,1516684507.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:15:07.489Z,1516684507.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:07.894Z,1516684507.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:15:07.896Z,1516684507.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:08.296Z,1516684508.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:15:08.297Z,1516684508.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:08.677Z,1516684508.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:15:08.678Z,1516684508.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:09.091Z,1516684509.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:15:09.092Z,1516684509.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:09.473Z,1516684509.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:15:09.475Z,1516684509.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:09.873Z,1516684509.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:15:09.874Z,1516684509.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:10.299Z,1516684510.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:15:10.300Z,1516684510.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:10.677Z,1516684510.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:15:10.678Z,1516684510.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:11.065Z,1516684511.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:15:11.066Z,1516684511.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:11.428Z,1516684511.428 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:15:11.428Z,1516684511.428 [NAL9602] Data Fault, FailCount= 1 2018-01-23T05:15:11.428Z,1516684511.428 [NAL9602](ERROR): Data Fault 2018-01-23T05:15:11.485Z,1516684511.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:15:11.486Z,1516684511.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:11.512Z,1516684511.512 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:15:11.828Z,1516684511.828 [NAL9602](INFO): Powering down 2018-01-23T05:15:11.880Z,1516684511.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:15:11.881Z,1516684511.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:12.300Z,1516684512.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:15:12.301Z,1516684512.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:12.666Z,1516684512.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:15:12.667Z,1516684512.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:12.685Z,1516684512.685 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T05:15:12.685Z,1516684512.685 [NAL9602] No Fault, FailCount= 1 2018-01-23T05:15:13.070Z,1516684513.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:15:13.071Z,1516684513.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:13.470Z,1516684513.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:15:13.471Z,1516684513.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:13.900Z,1516684513.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:15:13.901Z,1516684513.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:14.266Z,1516684514.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:15:14.267Z,1516684514.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:14.682Z,1516684514.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:15:14.687Z,1516684514.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:15.079Z,1516684515.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:15.470Z,1516684515.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:15.870Z,1516684515.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:16.279Z,1516684516.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:16.673Z,1516684516.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:17.077Z,1516684517.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:17.477Z,1516684517.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:17.879Z,1516684517.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:18.276Z,1516684518.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:18.669Z,1516684518.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:19.079Z,1516684519.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:19.475Z,1516684519.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:19.879Z,1516684519.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:20.279Z,1516684520.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:20.679Z,1516684520.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:21.080Z,1516684521.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:21.490Z,1516684521.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:21.874Z,1516684521.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:22.296Z,1516684522.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:22.689Z,1516684522.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:23.079Z,1516684523.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:23.486Z,1516684523.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:23.903Z,1516684523.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:24.302Z,1516684524.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:24.719Z,1516684524.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:25.123Z,1516684525.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:25.469Z,1516684525.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:25.870Z,1516684525.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:26.292Z,1516684526.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:26.723Z,1516684526.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:27.079Z,1516684527.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:27.519Z,1516684527.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:27.887Z,1516684527.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:28.292Z,1516684528.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:28.696Z,1516684528.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:29.106Z,1516684529.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:35.842Z,1516684535.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:35.958Z,1516684535.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:36.344Z,1516684536.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:36.704Z,1516684536.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:37.110Z,1516684537.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:37.510Z,1516684537.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:37.913Z,1516684537.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:38.308Z,1516684538.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:38.709Z,1516684538.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:39.107Z,1516684539.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:39.505Z,1516684539.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:39.907Z,1516684539.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:40.308Z,1516684540.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:40.709Z,1516684540.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:41.105Z,1516684541.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:41.504Z,1516684541.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:41.868Z,1516684541.868 [NAL9602](INFO): Powering up NAL9602 2018-01-23T05:15:41.917Z,1516684541.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:42.312Z,1516684542.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:42.704Z,1516684542.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:43.105Z,1516684543.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:43.515Z,1516684543.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:43.912Z,1516684543.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:44.308Z,1516684544.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:44.712Z,1516684544.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:45.105Z,1516684545.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:45.512Z,1516684545.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:45.905Z,1516684545.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:46.307Z,1516684546.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:46.705Z,1516684546.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:47.123Z,1516684547.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:47.506Z,1516684547.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:47.903Z,1516684547.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:48.302Z,1516684548.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:48.696Z,1516684548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:49.120Z,1516684549.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:49.505Z,1516684549.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:49.900Z,1516684549.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:50.300Z,1516684550.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:50.699Z,1516684550.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:51.096Z,1516684551.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:51.500Z,1516684551.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:51.904Z,1516684551.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:52.300Z,1516684552.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:52.737Z,1516684552.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:53.072Z,1516684553.072 [NAL9602](INFO): NAL9602 initialized 2018-01-23T05:15:53.113Z,1516684553.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:53.521Z,1516684553.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:53.930Z,1516684553.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:54.344Z,1516684554.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:54.722Z,1516684554.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:55.113Z,1516684555.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:55.511Z,1516684555.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:55.907Z,1516684555.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:56.308Z,1516684556.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:56.713Z,1516684556.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:57.114Z,1516684557.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:57.544Z,1516684557.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:57.913Z,1516684557.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:58.307Z,1516684558.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:58.709Z,1516684558.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:59.109Z,1516684559.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:59.513Z,1516684559.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:15:59.921Z,1516684559.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:00.325Z,1516684560.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:00.716Z,1516684560.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:01.108Z,1516684561.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:01.508Z,1516684561.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:01.913Z,1516684561.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:02.313Z,1516684562.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:02.725Z,1516684562.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:03.121Z,1516684563.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:03.521Z,1516684563.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:03.909Z,1516684563.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:04.313Z,1516684564.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:04.713Z,1516684564.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:05.120Z,1516684565.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:05.512Z,1516684565.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:05.923Z,1516684565.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:06.322Z,1516684566.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:06.719Z,1516684566.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:07.121Z,1516684567.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:07.525Z,1516684567.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:07.913Z,1516684567.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:08.313Z,1516684568.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:08.721Z,1516684568.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:09.123Z,1516684569.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:09.520Z,1516684569.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:09.920Z,1516684569.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:10.308Z,1516684570.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:10.709Z,1516684570.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:11.110Z,1516684571.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:11.513Z,1516684571.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:11.922Z,1516684571.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:12.322Z,1516684572.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:12.724Z,1516684572.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:13.113Z,1516684573.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:13.513Z,1516684573.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:13.913Z,1516684573.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:14.308Z,1516684574.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:14.718Z,1516684574.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:15.121Z,1516684575.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:15.519Z,1516684575.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:15.906Z,1516684575.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:16.313Z,1516684576.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:16.707Z,1516684576.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:17.119Z,1516684577.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:17.513Z,1516684577.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:17.919Z,1516684577.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:18.321Z,1516684578.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:18.718Z,1516684578.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:19.113Z,1516684579.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:19.513Z,1516684579.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:19.911Z,1516684579.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:20.309Z,1516684580.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:20.719Z,1516684580.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:21.122Z,1516684581.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:21.518Z,1516684581.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:21.915Z,1516684581.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:22.317Z,1516684582.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:22.713Z,1516684582.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:23.115Z,1516684583.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:23.519Z,1516684583.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:23.920Z,1516684583.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:24.321Z,1516684584.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:24.717Z,1516684584.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:25.115Z,1516684585.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:25.513Z,1516684585.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:25.910Z,1516684585.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:26.309Z,1516684586.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:26.725Z,1516684586.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:27.121Z,1516684587.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:27.124Z,1516684587.124 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:11:26.7Z 2018-01-23T05:16:27.124Z,1516684587.124 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:16:27.125Z,1516684587.125 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:16:27.519Z,1516684587.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:28.033Z,1516684588.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:28.333Z,1516684588.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:31.414Z,1516684591.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:31.494Z,1516684591.494 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0048.lzma 2018-01-23T05:16:31.560Z,1516684591.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:31.882Z,1516684591.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:32.237Z,1516684592.237 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0048.lzma.bak 2018-01-23T05:16:32.237Z,1516684592.237 [DataOverHttps](INFO): SBD MOMSN=7755051 2018-01-23T05:16:32.312Z,1516684592.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:32.929Z,1516684592.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:33.107Z,1516684593.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:36.173Z,1516684596.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:36.313Z,1516684596.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:36.674Z,1516684596.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:37.066Z,1516684597.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:37.466Z,1516684597.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:37.844Z,1516684597.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:40.932Z,1516684600.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:41.008Z,1516684601.008 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0049.lzma 2018-01-23T05:16:41.075Z,1516684601.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:41.416Z,1516684601.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:41.758Z,1516684601.758 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0049.lzma.bak 2018-01-23T05:16:41.758Z,1516684601.758 [DataOverHttps](INFO): SBD MOMSN=7755053 2018-01-23T05:16:41.849Z,1516684601.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:42.437Z,1516684602.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:42.440Z,1516684602.440 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:16:42.440Z,1516684602.440 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:16:42.440Z,1516684602.440 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:16:42.625Z,1516684602.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:45.691Z,1516684605.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:45.821Z,1516684605.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:46.217Z,1516684606.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:46.621Z,1516684606.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:46.994Z,1516684606.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:47.393Z,1516684607.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:47.792Z,1516684607.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:48.200Z,1516684608.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:48.597Z,1516684608.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:49.024Z,1516684609.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:49.422Z,1516684609.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:49.822Z,1516684609.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:50.192Z,1516684610.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:50.589Z,1516684610.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:50.993Z,1516684610.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:51.392Z,1516684611.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:51.821Z,1516684611.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:52.219Z,1516684612.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:52.624Z,1516684612.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:52.993Z,1516684612.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:53.397Z,1516684613.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:53.796Z,1516684613.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:54.191Z,1516684614.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:54.601Z,1516684614.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:54.998Z,1516684614.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:55.397Z,1516684615.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:55.798Z,1516684615.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:56.196Z,1516684616.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:56.589Z,1516684616.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:57.005Z,1516684617.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:57.396Z,1516684617.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:57.798Z,1516684617.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:58.210Z,1516684618.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:58.608Z,1516684618.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:58.991Z,1516684618.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:59.399Z,1516684619.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:16:59.800Z,1516684619.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:00.191Z,1516684620.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:00.601Z,1516684620.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:01.002Z,1516684621.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:01.402Z,1516684621.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:01.802Z,1516684621.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:02.199Z,1516684622.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:02.591Z,1516684622.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:03.001Z,1516684623.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:03.399Z,1516684623.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:03.806Z,1516684623.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:04.206Z,1516684624.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:04.605Z,1516684624.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:05.003Z,1516684625.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:05.405Z,1516684625.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:05.801Z,1516684625.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:06.192Z,1516684626.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:06.599Z,1516684626.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:07.006Z,1516684627.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:07.405Z,1516684627.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:07.805Z,1516684627.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:08.208Z,1516684628.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:08.592Z,1516684628.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:09.001Z,1516684629.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:09.400Z,1516684629.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:09.805Z,1516684629.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:10.206Z,1516684630.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:10.606Z,1516684630.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:10.993Z,1516684630.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:11.488Z,1516684631.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:11.802Z,1516684631.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:12.195Z,1516684632.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:12.610Z,1516684632.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:13.012Z,1516684633.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:13.411Z,1516684633.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:13.803Z,1516684633.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:14.188Z,1516684634.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:14.582Z,1516684634.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:14.989Z,1516684634.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:15.388Z,1516684635.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:15.805Z,1516684635.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:16.209Z,1516684636.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:16.598Z,1516684636.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:17.007Z,1516684637.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:17.420Z,1516684637.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:17.812Z,1516684637.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:18.209Z,1516684638.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:18.618Z,1516684638.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:19.018Z,1516684639.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:19.414Z,1516684639.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:19.826Z,1516684639.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:20.200Z,1516684640.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:20.591Z,1516684640.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:20.997Z,1516684640.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:21.392Z,1516684641.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:21.806Z,1516684641.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:22.202Z,1516684642.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:22.610Z,1516684642.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:22.989Z,1516684642.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:23.397Z,1516684643.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:23.796Z,1516684643.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:24.192Z,1516684644.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:24.597Z,1516684644.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:25.010Z,1516684645.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:25.402Z,1516684645.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:25.810Z,1516684645.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:26.200Z,1516684646.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:26.594Z,1516684646.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:27.001Z,1516684647.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:27.404Z,1516684647.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:27.806Z,1516684647.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:28.206Z,1516684648.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:28.605Z,1516684648.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:28.999Z,1516684648.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:29.399Z,1516684649.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:29.808Z,1516684649.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:30.197Z,1516684650.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:30.598Z,1516684650.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:31.011Z,1516684651.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:31.409Z,1516684651.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:31.809Z,1516684651.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:32.208Z,1516684652.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:32.603Z,1516684652.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:33.000Z,1516684653.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:33.400Z,1516684653.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:33.804Z,1516684653.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:34.217Z,1516684654.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:34.612Z,1516684654.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:35.004Z,1516684655.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:35.409Z,1516684655.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:35.808Z,1516684655.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:36.200Z,1516684656.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:36.598Z,1516684656.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:37.011Z,1516684657.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:37.410Z,1516684657.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:37.810Z,1516684657.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:38.201Z,1516684658.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:38.604Z,1516684658.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:39.004Z,1516684659.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:39.402Z,1516684659.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:39.807Z,1516684659.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:40.217Z,1516684660.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:40.611Z,1516684660.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:40.999Z,1516684660.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:41.409Z,1516684661.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:41.813Z,1516684661.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:42.192Z,1516684662.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:42.605Z,1516684662.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:43.017Z,1516684663.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:46.099Z,1516684666.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:46.226Z,1516684666.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:46.571Z,1516684666.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:46.970Z,1516684666.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:47.368Z,1516684667.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:47.772Z,1516684667.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:48.175Z,1516684668.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:48.585Z,1516684668.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:48.968Z,1516684668.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:49.376Z,1516684669.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:49.771Z,1516684669.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:50.176Z,1516684670.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:50.567Z,1516684670.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:50.984Z,1516684670.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:51.385Z,1516684671.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:51.789Z,1516684671.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:52.170Z,1516684672.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:52.568Z,1516684672.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:52.973Z,1516684672.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:53.375Z,1516684673.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:53.789Z,1516684673.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:54.185Z,1516684674.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:54.581Z,1516684674.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:54.975Z,1516684674.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:55.376Z,1516684675.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:55.780Z,1516684675.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:56.185Z,1516684676.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:56.186Z,1516684676.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-01-23T05:17:56.186Z,1516684676.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:17:56.188Z,1516684676.188 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:56.188Z,1516684676.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-01-23T05:17:56.188Z,1516684676.188 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:17:56.189Z,1516684676.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:56.190Z,1516684676.190 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41 2018-01-23T05:17:56.190Z,1516684676.190 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:17:56.214Z,1516684676.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:17:56.214Z,1516684676.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:17:56.214Z,1516684676.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:17:56.590Z,1516684676.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:17:56.590Z,1516684676.590 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-01-23T05:17:56.590Z,1516684676.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:17:56.590Z,1516684676.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-01-23T05:17:56.591Z,1516684676.591 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:17:56.591Z,1516684676.591 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41 2018-01-23T05:17:56.968Z,1516684676.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:17:56.968Z,1516684676.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:17:56.969Z,1516684676.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:17:56.969Z,1516684676.969 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:17:56.969Z,1516684676.969 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:17:56.970Z,1516684676.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:17:56.970Z,1516684676.970 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:17:56.970Z,1516684676.970 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:17:56.975Z,1516684676.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:17:57.381Z,1516684677.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:17:57.382Z,1516684677.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:57.790Z,1516684677.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:17:57.791Z,1516684677.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:58.186Z,1516684678.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:17:58.187Z,1516684678.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:58.586Z,1516684678.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:17:58.587Z,1516684678.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:58.970Z,1516684678.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:17:58.998Z,1516684678.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:59.388Z,1516684679.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:17:59.389Z,1516684679.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:17:59.764Z,1516684679.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:17:59.765Z,1516684679.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:00.168Z,1516684680.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:18:00.169Z,1516684680.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:00.569Z,1516684680.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:18:00.570Z,1516684680.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:00.975Z,1516684680.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:18:00.976Z,1516684680.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:01.374Z,1516684681.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:18:01.375Z,1516684681.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:01.774Z,1516684681.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:18:01.775Z,1516684681.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:02.172Z,1516684682.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:18:02.173Z,1516684682.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:02.568Z,1516684682.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:18:02.568Z,1516684682.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:02.971Z,1516684682.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:18:02.972Z,1516684682.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:03.376Z,1516684683.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:18:03.377Z,1516684683.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:03.778Z,1516684683.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:18:03.779Z,1516684683.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:04.174Z,1516684684.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:18:04.179Z,1516684684.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:04.575Z,1516684684.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:18:04.576Z,1516684684.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:04.973Z,1516684684.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:18:04.974Z,1516684684.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:05.372Z,1516684685.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:18:05.373Z,1516684685.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:05.775Z,1516684685.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:18:05.776Z,1516684685.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:06.180Z,1516684686.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:18:06.181Z,1516684686.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:06.580Z,1516684686.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:18:06.581Z,1516684686.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:06.973Z,1516684686.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:18:06.974Z,1516684686.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:07.378Z,1516684687.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:18:07.379Z,1516684687.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:07.776Z,1516684687.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:18:07.777Z,1516684687.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:08.189Z,1516684688.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:18:08.190Z,1516684688.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:08.588Z,1516684688.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:18:08.589Z,1516684688.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:08.974Z,1516684688.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:18:08.975Z,1516684688.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:09.376Z,1516684689.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:18:09.377Z,1516684689.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:09.779Z,1516684689.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:18:09.780Z,1516684689.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:10.179Z,1516684690.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:18:10.180Z,1516684690.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:10.579Z,1516684690.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:18:10.580Z,1516684690.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:10.980Z,1516684690.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:18:10.981Z,1516684690.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:11.376Z,1516684691.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:18:11.377Z,1516684691.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:11.779Z,1516684691.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:18:11.780Z,1516684691.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:12.182Z,1516684692.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:18:12.183Z,1516684692.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:12.576Z,1516684692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:18:12.577Z,1516684692.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:12.976Z,1516684692.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:18:12.977Z,1516684692.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:13.380Z,1516684693.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:18:13.381Z,1516684693.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:13.784Z,1516684693.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:18:13.785Z,1516684693.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:14.192Z,1516684694.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:18:14.193Z,1516684694.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:14.596Z,1516684694.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:18:14.597Z,1516684694.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:14.975Z,1516684694.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:18:14.976Z,1516684694.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:15.380Z,1516684695.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:18:15.381Z,1516684695.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:15.785Z,1516684695.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:18:15.786Z,1516684695.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:16.188Z,1516684696.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:16.585Z,1516684696.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:16.984Z,1516684696.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:17.372Z,1516684697.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:17.784Z,1516684697.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:18.189Z,1516684698.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:18.585Z,1516684698.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:18.984Z,1516684698.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:19.360Z,1516684699.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:19.801Z,1516684699.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:20.182Z,1516684700.182 [PNI_TCM](ERROR): CRC does not match. Expected:0x46428 got:0x40219 2018-01-23T05:18:20.209Z,1516684700.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:20.593Z,1516684700.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:20.965Z,1516684700.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:21.396Z,1516684701.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:21.793Z,1516684701.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:22.197Z,1516684702.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:22.587Z,1516684702.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:22.997Z,1516684702.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:23.368Z,1516684703.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:23.797Z,1516684703.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:24.194Z,1516684704.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:24.596Z,1516684704.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:24.968Z,1516684704.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:25.378Z,1516684705.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:25.796Z,1516684705.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:26.201Z,1516684706.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:26.568Z,1516684706.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:26.978Z,1516684706.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:27.376Z,1516684707.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:27.804Z,1516684707.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:28.176Z,1516684708.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:28.579Z,1516684708.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:28.970Z,1516684708.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:29.363Z,1516684709.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:29.776Z,1516684709.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:30.183Z,1516684710.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:30.578Z,1516684710.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:30.977Z,1516684710.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:31.367Z,1516684711.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:31.781Z,1516684711.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:32.178Z,1516684712.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:32.608Z,1516684712.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:32.978Z,1516684712.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:33.366Z,1516684713.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:33.778Z,1516684713.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:34.167Z,1516684714.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:34.573Z,1516684714.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:34.990Z,1516684714.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:35.383Z,1516684715.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:35.781Z,1516684715.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:36.174Z,1516684716.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:36.566Z,1516684716.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:36.983Z,1516684716.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:37.373Z,1516684717.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:37.777Z,1516684717.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:38.177Z,1516684718.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:38.594Z,1516684718.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:38.977Z,1516684718.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:39.372Z,1516684719.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:39.776Z,1516684719.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:40.171Z,1516684720.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:40.573Z,1516684720.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:40.985Z,1516684720.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:41.379Z,1516684721.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:41.778Z,1516684721.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:42.178Z,1516684722.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:42.576Z,1516684722.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:42.974Z,1516684722.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:43.378Z,1516684723.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:46.473Z,1516684726.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:46.619Z,1516684726.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:46.980Z,1516684726.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:47.376Z,1516684727.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:47.777Z,1516684727.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:48.150Z,1516684728.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:48.553Z,1516684728.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:48.979Z,1516684728.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:49.358Z,1516684729.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:49.755Z,1516684729.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:50.152Z,1516684730.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:50.551Z,1516684730.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:50.952Z,1516684730.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:51.352Z,1516684731.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:51.750Z,1516684731.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:52.166Z,1516684732.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:52.565Z,1516684732.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:52.961Z,1516684732.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:53.353Z,1516684733.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:53.751Z,1516684733.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:54.153Z,1516684734.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:54.553Z,1516684734.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:54.961Z,1516684734.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:55.364Z,1516684735.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:55.762Z,1516684735.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:56.158Z,1516684736.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:56.558Z,1516684736.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:56.965Z,1516684736.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:57.364Z,1516684737.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:57.755Z,1516684737.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:58.163Z,1516684738.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:58.575Z,1516684738.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:58.965Z,1516684738.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:59.359Z,1516684739.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:18:59.764Z,1516684739.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:00.159Z,1516684740.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:00.565Z,1516684740.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:00.973Z,1516684740.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:01.398Z,1516684741.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:01.773Z,1516684741.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:02.149Z,1516684742.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:02.548Z,1516684742.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:02.950Z,1516684742.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:03.354Z,1516684743.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:03.752Z,1516684743.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:04.157Z,1516684744.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:04.565Z,1516684744.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:04.958Z,1516684744.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:05.354Z,1516684745.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:05.753Z,1516684745.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:06.154Z,1516684746.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:06.550Z,1516684746.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:06.958Z,1516684746.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:07.366Z,1516684747.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:07.765Z,1516684747.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:08.160Z,1516684748.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:08.562Z,1516684748.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:08.955Z,1516684748.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:09.355Z,1516684749.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:09.764Z,1516684749.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:10.169Z,1516684750.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:10.573Z,1516684750.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:10.969Z,1516684750.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:11.364Z,1516684751.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:11.760Z,1516684751.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:12.162Z,1516684752.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:12.559Z,1516684752.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:12.969Z,1516684752.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:13.370Z,1516684753.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:13.765Z,1516684753.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:14.164Z,1516684754.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:14.565Z,1516684754.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:14.941Z,1516684754.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:15.344Z,1516684755.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:15.749Z,1516684755.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:16.162Z,1516684756.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:16.585Z,1516684756.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:16.976Z,1516684756.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:17.352Z,1516684757.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:17.753Z,1516684757.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:18.151Z,1516684758.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:18.556Z,1516684758.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:18.955Z,1516684758.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:19.358Z,1516684759.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:19.754Z,1516684759.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:20.153Z,1516684760.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:20.552Z,1516684760.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:20.951Z,1516684760.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:21.351Z,1516684761.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:21.750Z,1516684761.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:22.155Z,1516684762.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:22.561Z,1516684762.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:22.965Z,1516684762.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:23.352Z,1516684763.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:23.752Z,1516684763.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:24.151Z,1516684764.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:24.550Z,1516684764.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:24.955Z,1516684764.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:25.366Z,1516684765.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:25.765Z,1516684765.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:26.165Z,1516684766.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:26.555Z,1516684766.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:26.952Z,1516684766.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:27.363Z,1516684767.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:27.754Z,1516684767.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:28.165Z,1516684768.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:28.566Z,1516684768.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:28.972Z,1516684768.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:29.361Z,1516684769.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:29.760Z,1516684769.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:30.164Z,1516684770.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:30.553Z,1516684770.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:30.973Z,1516684770.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:31.380Z,1516684771.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:31.767Z,1516684771.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:32.153Z,1516684772.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:32.560Z,1516684772.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:32.964Z,1516684772.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:33.358Z,1516684773.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:33.761Z,1516684773.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:34.165Z,1516684774.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:34.568Z,1516684774.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:34.968Z,1516684774.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:35.358Z,1516684775.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:35.760Z,1516684775.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:36.161Z,1516684776.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:36.549Z,1516684776.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:36.969Z,1516684776.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:37.373Z,1516684777.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:37.765Z,1516684777.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:38.164Z,1516684778.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:38.565Z,1516684778.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:38.941Z,1516684778.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:39.344Z,1516684779.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:39.777Z,1516684779.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:40.171Z,1516684780.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:40.577Z,1516684780.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:40.974Z,1516684780.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:41.352Z,1516684781.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:41.751Z,1516684781.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:42.153Z,1516684782.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:42.558Z,1516684782.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:42.982Z,1516684782.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:43.359Z,1516684783.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:43.756Z,1516684783.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:46.849Z,1516684786.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:46.993Z,1516684786.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:47.345Z,1516684787.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:47.741Z,1516684787.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:48.134Z,1516684788.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:48.538Z,1516684788.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:48.944Z,1516684788.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:49.316Z,1516684789.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:49.721Z,1516684789.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:50.141Z,1516684790.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:50.539Z,1516684790.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:50.939Z,1516684790.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:51.319Z,1516684791.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:51.716Z,1516684791.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:52.113Z,1516684792.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:52.516Z,1516684792.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:52.926Z,1516684792.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:53.322Z,1516684793.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:53.724Z,1516684793.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:54.121Z,1516684794.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:54.521Z,1516684794.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:54.918Z,1516684794.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:55.330Z,1516684795.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:55.725Z,1516684795.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:56.119Z,1516684796.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:56.525Z,1516684796.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:56.922Z,1516684796.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:57.322Z,1516684797.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:57.721Z,1516684797.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:58.125Z,1516684798.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:58.520Z,1516684798.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:58.922Z,1516684798.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:59.322Z,1516684799.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:19:59.728Z,1516684799.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:00.118Z,1516684800.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:00.521Z,1516684800.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:00.921Z,1516684800.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:01.326Z,1516684801.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:01.725Z,1516684801.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:02.117Z,1516684802.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:02.517Z,1516684802.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:02.933Z,1516684802.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:03.329Z,1516684803.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:03.725Z,1516684803.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:04.118Z,1516684804.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:04.520Z,1516684804.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:04.929Z,1516684804.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:05.333Z,1516684805.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:05.736Z,1516684805.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:06.117Z,1516684806.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:06.517Z,1516684806.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:06.925Z,1516684806.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:07.330Z,1516684807.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:07.733Z,1516684807.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:08.121Z,1516684808.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:08.520Z,1516684808.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:08.931Z,1516684808.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:09.351Z,1516684809.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:09.730Z,1516684809.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:10.124Z,1516684810.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:10.524Z,1516684810.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:10.930Z,1516684810.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:11.330Z,1516684811.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:11.726Z,1516684811.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:12.121Z,1516684812.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:12.523Z,1516684812.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:12.926Z,1516684812.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:13.330Z,1516684813.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:13.730Z,1516684813.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:14.132Z,1516684814.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:14.518Z,1516684814.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:14.928Z,1516684814.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:15.326Z,1516684815.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:15.724Z,1516684815.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:16.129Z,1516684816.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:16.541Z,1516684816.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:16.938Z,1516684816.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:17.319Z,1516684817.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:17.728Z,1516684817.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:18.128Z,1516684818.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:18.523Z,1516684818.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:18.927Z,1516684818.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:19.327Z,1516684819.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:19.729Z,1516684819.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:20.132Z,1516684820.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:20.524Z,1516684820.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:20.917Z,1516684820.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:21.333Z,1516684821.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:21.717Z,1516684821.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:22.134Z,1516684822.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:22.536Z,1516684822.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:22.928Z,1516684822.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:23.324Z,1516684823.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:23.749Z,1516684823.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:24.131Z,1516684824.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:24.536Z,1516684824.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:24.949Z,1516684824.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:25.353Z,1516684825.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:25.765Z,1516684825.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:26.202Z,1516684826.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:26.525Z,1516684826.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:26.925Z,1516684826.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:27.324Z,1516684827.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:27.725Z,1516684827.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:28.125Z,1516684828.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:28.525Z,1516684828.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:28.925Z,1516684828.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:29.321Z,1516684829.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:29.723Z,1516684829.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:30.154Z,1516684830.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:30.526Z,1516684830.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:30.951Z,1516684830.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:31.333Z,1516684831.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:31.781Z,1516684831.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:32.169Z,1516684832.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:32.529Z,1516684832.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:32.946Z,1516684832.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:33.390Z,1516684833.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:33.742Z,1516684833.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:34.149Z,1516684834.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:34.560Z,1516684834.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:34.961Z,1516684834.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:35.321Z,1516684835.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:35.729Z,1516684835.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:36.105Z,1516684836.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:36.508Z,1516684836.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:36.912Z,1516684836.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:37.332Z,1516684837.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:37.733Z,1516684837.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:38.141Z,1516684838.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:38.533Z,1516684838.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:38.937Z,1516684838.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:39.312Z,1516684839.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:39.712Z,1516684839.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:40.142Z,1516684840.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:40.525Z,1516684840.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:40.918Z,1516684840.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:41.314Z,1516684841.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:41.716Z,1516684841.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:42.114Z,1516684842.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:42.516Z,1516684842.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:42.914Z,1516684842.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:43.318Z,1516684843.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:43.722Z,1516684843.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:44.129Z,1516684844.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:47.213Z,1516684847.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:47.349Z,1516684847.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:47.699Z,1516684847.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:48.105Z,1516684848.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:48.499Z,1516684848.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:48.900Z,1516684848.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:49.277Z,1516684849.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:49.677Z,1516684849.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:50.107Z,1516684850.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:50.510Z,1516684850.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:50.906Z,1516684850.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:51.305Z,1516684851.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:51.712Z,1516684851.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:52.077Z,1516684852.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:52.484Z,1516684852.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:52.894Z,1516684852.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:53.351Z,1516684853.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:53.693Z,1516684853.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:54.125Z,1516684854.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:54.489Z,1516684854.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:54.880Z,1516684854.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:55.288Z,1516684855.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:55.688Z,1516684855.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:56.125Z,1516684856.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:56.501Z,1516684856.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:56.889Z,1516684856.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:57.291Z,1516684857.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:57.291Z,1516684857.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-01-23T05:20:57.292Z,1516684857.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:20:57.293Z,1516684857.293 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:57.293Z,1516684857.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-01-23T05:20:57.293Z,1516684857.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:20:57.295Z,1516684857.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:57.295Z,1516684857.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42 2018-01-23T05:20:57.296Z,1516684857.296 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:20:57.320Z,1516684857.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:20:57.320Z,1516684857.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:20:57.321Z,1516684857.321 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:20:57.703Z,1516684857.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:20:57.703Z,1516684857.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-01-23T05:20:57.704Z,1516684857.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:20:57.704Z,1516684857.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-01-23T05:20:57.704Z,1516684857.704 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:20:57.704Z,1516684857.704 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42 2018-01-23T05:20:58.095Z,1516684858.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:20:58.096Z,1516684858.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:20:58.096Z,1516684858.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:20:58.097Z,1516684858.097 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:20:58.097Z,1516684858.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:20:58.097Z,1516684858.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:20:58.098Z,1516684858.098 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:20:58.098Z,1516684858.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:20:58.098Z,1516684858.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:20:58.487Z,1516684858.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:20:58.488Z,1516684858.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:58.893Z,1516684858.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:20:58.894Z,1516684858.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:59.299Z,1516684859.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:20:59.300Z,1516684859.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:20:59.696Z,1516684859.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:20:59.697Z,1516684859.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:00.102Z,1516684860.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:21:00.103Z,1516684860.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:00.491Z,1516684860.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:21:00.492Z,1516684860.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:00.892Z,1516684860.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:21:00.892Z,1516684860.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:01.294Z,1516684861.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:21:01.295Z,1516684861.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:01.691Z,1516684861.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:21:01.692Z,1516684861.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:02.101Z,1516684862.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:21:02.102Z,1516684862.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:02.495Z,1516684862.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:21:02.496Z,1516684862.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:02.900Z,1516684862.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:21:02.901Z,1516684862.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:03.292Z,1516684863.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:21:03.293Z,1516684863.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:03.693Z,1516684863.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:21:03.694Z,1516684863.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:04.068Z,1516684864.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:21:04.069Z,1516684864.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:04.496Z,1516684864.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:21:04.497Z,1516684864.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:04.878Z,1516684864.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:21:04.906Z,1516684864.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:05.296Z,1516684865.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:21:05.297Z,1516684865.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:05.697Z,1516684865.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:21:05.698Z,1516684865.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:06.105Z,1516684866.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:21:06.106Z,1516684866.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:06.498Z,1516684866.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:21:06.499Z,1516684866.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:06.876Z,1516684866.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:21:06.877Z,1516684866.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:07.279Z,1516684867.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:21:07.280Z,1516684867.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:07.670Z,1516684867.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:21:07.671Z,1516684867.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:08.108Z,1516684868.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:21:08.109Z,1516684868.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:08.509Z,1516684868.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:21:08.510Z,1516684868.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:08.902Z,1516684868.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:21:08.907Z,1516684868.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:09.284Z,1516684869.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:21:09.285Z,1516684869.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:09.679Z,1516684869.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:21:09.680Z,1516684869.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:10.080Z,1516684870.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:21:10.081Z,1516684870.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:10.479Z,1516684870.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:21:10.480Z,1516684870.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:10.879Z,1516684870.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:21:10.880Z,1516684870.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:11.290Z,1516684871.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:21:11.303Z,1516684871.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:11.714Z,1516684871.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:21:11.715Z,1516684871.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:12.088Z,1516684872.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:21:12.089Z,1516684872.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:12.477Z,1516684872.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:21:12.477Z,1516684872.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:12.882Z,1516684872.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:21:12.883Z,1516684872.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:13.283Z,1516684873.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:21:13.284Z,1516684873.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:13.678Z,1516684873.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:21:13.679Z,1516684873.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:14.096Z,1516684874.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:21:14.097Z,1516684874.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:14.475Z,1516684874.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:14.488Z,1516684874.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:21:14.489Z,1516684874.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:14.872Z,1516684874.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:14.886Z,1516684874.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:21:14.887Z,1516684874.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:15.274Z,1516684875.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:15.288Z,1516684875.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:21:15.289Z,1516684875.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:15.666Z,1516684875.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:15.680Z,1516684875.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:21:15.681Z,1516684875.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:16.060Z,1516684876.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:16.083Z,1516684876.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:21:16.084Z,1516684876.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:16.468Z,1516684876.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:16.483Z,1516684876.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:21:16.484Z,1516684876.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:16.869Z,1516684876.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:16.888Z,1516684876.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:21:16.889Z,1516684876.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:17.270Z,1516684877.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:17.288Z,1516684877.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:21:17.289Z,1516684877.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:17.673Z,1516684877.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:17.687Z,1516684877.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:18.072Z,1516684878.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:18.092Z,1516684878.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:18.470Z,1516684878.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:18.484Z,1516684878.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:18.865Z,1516684878.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:18.879Z,1516684878.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:19.268Z,1516684879.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:19.296Z,1516684879.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:19.666Z,1516684879.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:19.690Z,1516684879.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:20.084Z,1516684880.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:20.098Z,1516684880.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:20.475Z,1516684880.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:20.489Z,1516684880.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:20.874Z,1516684880.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:20.901Z,1516684880.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:21.273Z,1516684881.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:21.287Z,1516684881.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:21.670Z,1516684881.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:21.684Z,1516684881.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:22.077Z,1516684882.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:22.103Z,1516684882.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:22.479Z,1516684882.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:22.505Z,1516684882.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:22.880Z,1516684882.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:22.894Z,1516684882.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:23.260Z,1516684883.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:23.297Z,1516684883.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:23.665Z,1516684883.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:23.690Z,1516684883.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:24.070Z,1516684884.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:24.102Z,1516684884.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:24.476Z,1516684884.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:24.498Z,1516684884.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:24.880Z,1516684884.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:24.894Z,1516684884.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:25.262Z,1516684885.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:25.294Z,1516684885.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:25.658Z,1516684885.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:25.695Z,1516684885.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:26.070Z,1516684886.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:26.096Z,1516684886.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:26.482Z,1516684886.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:26.496Z,1516684886.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:26.876Z,1516684886.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:26.898Z,1516684886.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:27.259Z,1516684887.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:27.293Z,1516684887.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:27.661Z,1516684887.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:27.668Z,1516684887.668 [PNI_TCM](ERROR): CRC does not match. Expected:0x60897 got:0x28 2018-01-23T05:21:27.698Z,1516684887.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:28.068Z,1516684888.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:28.106Z,1516684888.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:28.489Z,1516684888.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:28.503Z,1516684888.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:28.883Z,1516684888.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:28.909Z,1516684888.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:29.261Z,1516684889.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:29.294Z,1516684889.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:29.664Z,1516684889.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:29.700Z,1516684889.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:30.072Z,1516684890.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:30.107Z,1516684890.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:30.475Z,1516684890.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:30.504Z,1516684890.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:30.871Z,1516684890.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:30.906Z,1516684890.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:31.260Z,1516684891.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:31.307Z,1516684891.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:31.657Z,1516684891.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:31.678Z,1516684891.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:32.079Z,1516684892.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:32.113Z,1516684892.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:32.478Z,1516684892.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:32.512Z,1516684892.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:32.873Z,1516684892.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:32.909Z,1516684892.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:33.269Z,1516684893.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:33.311Z,1516684893.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:33.664Z,1516684893.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:33.701Z,1516684893.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:34.070Z,1516684894.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:34.085Z,1516684894.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:34.473Z,1516684894.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:34.493Z,1516684894.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:34.876Z,1516684894.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:34.896Z,1516684894.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:35.269Z,1516684895.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:35.310Z,1516684895.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:35.673Z,1516684895.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:35.680Z,1516684895.680 [PNI_TCM](ERROR): CRC does not match. Expected:0x24424 got:0x25872 2018-01-23T05:21:35.716Z,1516684895.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:36.074Z,1516684896.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:36.092Z,1516684896.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:36.475Z,1516684896.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:36.489Z,1516684896.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:36.871Z,1516684896.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:36.911Z,1516684896.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:37.267Z,1516684897.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:37.277Z,1516684897.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x65121 got:0x33276 2018-01-23T05:21:37.297Z,1516684897.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:37.662Z,1516684897.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:37.691Z,1516684897.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:38.077Z,1516684898.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:38.097Z,1516684898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:38.475Z,1516684898.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:38.501Z,1516684898.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:38.878Z,1516684898.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:38.885Z,1516684898.885 [PNI_TCM](ERROR): CRC does not match. Expected:0x39902 got:0x8731 2018-01-23T05:21:38.924Z,1516684898.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:39.261Z,1516684899.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:39.281Z,1516684899.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:39.664Z,1516684899.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:39.696Z,1516684899.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:40.075Z,1516684900.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:40.121Z,1516684900.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:40.482Z,1516684900.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:40.488Z,1516684900.488 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T05:21:40.528Z,1516684900.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:40.879Z,1516684900.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:40.893Z,1516684900.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:41.265Z,1516684901.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:41.286Z,1516684901.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:41.660Z,1516684901.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:41.696Z,1516684901.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:42.082Z,1516684902.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:42.097Z,1516684902.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:42.481Z,1516684902.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:42.495Z,1516684902.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:42.877Z,1516684902.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:42.896Z,1516684902.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:42.898Z,1516684902.898 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:21:42.899Z,1516684902.899 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:21:42.899Z,1516684902.899 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:21:42.899Z,1516684902.899 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:21:43.258Z,1516684903.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:43.290Z,1516684903.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:43.296Z,1516684903.296 [Default:CheckIn:D] Stopped 2018-01-23T05:21:43.296Z,1516684903.296 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:21:43.655Z,1516684903.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:43.688Z,1516684903.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:43.695Z,1516684903.695 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.853931 min 2018-01-23T05:21:43.695Z,1516684903.695 [Default:CheckIn:E] Stopped 2018-01-23T05:21:43.695Z,1516684903.695 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn] Stopped 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn](INFO): Running loop #13 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn] Running Loop=13 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:21:43.696Z,1516684903.696 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:21:44.074Z,1516684904.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:44.101Z,1516684904.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:44.483Z,1516684904.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:44.497Z,1516684904.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:47.573Z,1516684907.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:47.587Z,1516684907.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:47.701Z,1516684907.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:47.735Z,1516684907.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:48.038Z,1516684908.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:48.080Z,1516684908.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:48.439Z,1516684908.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:48.473Z,1516684908.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:48.834Z,1516684908.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:48.848Z,1516684908.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:49.240Z,1516684909.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:49.254Z,1516684909.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:49.682Z,1516684909.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:50.054Z,1516684910.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:50.450Z,1516684910.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:50.837Z,1516684910.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:50.856Z,1516684910.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:51.235Z,1516684911.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:51.254Z,1516684911.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:51.636Z,1516684911.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:51.656Z,1516684911.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:52.042Z,1516684912.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:52.056Z,1516684912.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:52.447Z,1516684912.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:52.462Z,1516684912.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:52.851Z,1516684912.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:52.865Z,1516684912.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:53.248Z,1516684913.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:53.262Z,1516684913.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:53.636Z,1516684913.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:53.655Z,1516684913.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:54.036Z,1516684914.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:54.050Z,1516684914.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:54.439Z,1516684914.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:54.452Z,1516684914.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:54.836Z,1516684914.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:54.855Z,1516684914.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:55.250Z,1516684915.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:55.269Z,1516684915.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:55.651Z,1516684915.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:55.665Z,1516684915.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:56.047Z,1516684916.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:56.061Z,1516684916.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:56.436Z,1516684916.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:21:56.454Z,1516684916.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:56.856Z,1516684916.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:57.256Z,1516684917.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:57.662Z,1516684917.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:58.060Z,1516684918.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:58.461Z,1516684918.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:58.865Z,1516684918.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:59.265Z,1516684919.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:21:59.653Z,1516684919.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:00.061Z,1516684920.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:00.460Z,1516684920.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:00.853Z,1516684920.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:01.265Z,1516684921.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:01.672Z,1516684921.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:02.066Z,1516684922.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:02.458Z,1516684922.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:02.862Z,1516684922.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:03.256Z,1516684923.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:03.663Z,1516684923.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:04.063Z,1516684924.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:04.465Z,1516684924.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:04.869Z,1516684924.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:05.273Z,1516684925.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:05.650Z,1516684925.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:06.060Z,1516684926.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:06.444Z,1516684926.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:06.841Z,1516684926.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:07.275Z,1516684927.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:07.678Z,1516684927.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:08.054Z,1516684928.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:08.452Z,1516684928.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:08.863Z,1516684928.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:09.252Z,1516684929.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:09.654Z,1516684929.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:10.052Z,1516684930.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:10.457Z,1516684930.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:10.870Z,1516684930.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:11.268Z,1516684931.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:11.652Z,1516684931.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:12.054Z,1516684932.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:12.465Z,1516684932.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:12.853Z,1516684932.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:13.254Z,1516684933.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:13.672Z,1516684933.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:14.073Z,1516684934.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:14.463Z,1516684934.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:14.869Z,1516684934.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:15.259Z,1516684935.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:15.656Z,1516684935.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:16.042Z,1516684936.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:16.473Z,1516684936.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:16.876Z,1516684936.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:17.273Z,1516684937.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:17.641Z,1516684937.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:18.049Z,1516684938.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:18.449Z,1516684938.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:18.849Z,1516684938.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:19.280Z,1516684939.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:19.680Z,1516684939.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:20.058Z,1516684940.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:20.457Z,1516684940.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:20.851Z,1516684940.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:21.256Z,1516684941.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:21.651Z,1516684941.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:22.056Z,1516684942.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:22.455Z,1516684942.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:22.858Z,1516684942.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:23.254Z,1516684943.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:23.648Z,1516684943.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:24.050Z,1516684944.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:24.456Z,1516684944.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:24.848Z,1516684944.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:25.254Z,1516684945.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:25.664Z,1516684945.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:26.054Z,1516684946.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:26.457Z,1516684946.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:26.862Z,1516684946.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:27.250Z,1516684947.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:27.654Z,1516684947.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:28.053Z,1516684948.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:28.461Z,1516684948.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:28.865Z,1516684948.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:29.269Z,1516684949.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:29.649Z,1516684949.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:30.060Z,1516684950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:30.458Z,1516684950.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:30.850Z,1516684950.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:31.262Z,1516684951.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:31.661Z,1516684951.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:32.060Z,1516684952.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:32.452Z,1516684952.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:32.856Z,1516684952.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:33.260Z,1516684953.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:33.661Z,1516684953.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:34.065Z,1516684954.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:34.462Z,1516684954.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:34.867Z,1516684954.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:35.267Z,1516684955.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:35.659Z,1516684955.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:36.059Z,1516684956.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:36.457Z,1516684956.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:36.859Z,1516684956.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:37.262Z,1516684957.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:37.667Z,1516684957.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:38.062Z,1516684958.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:38.459Z,1516684958.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:38.866Z,1516684958.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:39.257Z,1516684959.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:39.659Z,1516684959.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:40.065Z,1516684960.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:40.466Z,1516684960.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:40.873Z,1516684960.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:41.270Z,1516684961.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:41.664Z,1516684961.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:42.060Z,1516684962.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:42.446Z,1516684962.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:42.849Z,1516684962.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:43.281Z,1516684963.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:43.679Z,1516684963.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:44.078Z,1516684964.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:44.505Z,1516684964.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:44.854Z,1516684964.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:47.957Z,1516684967.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:48.109Z,1516684968.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:48.460Z,1516684968.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:48.858Z,1516684968.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:49.257Z,1516684969.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:49.657Z,1516684969.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:50.049Z,1516684970.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:50.450Z,1516684970.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:50.847Z,1516684970.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:51.258Z,1516684971.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:51.664Z,1516684971.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:52.053Z,1516684972.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:52.447Z,1516684972.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:52.852Z,1516684972.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:53.253Z,1516684973.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:53.651Z,1516684973.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:54.052Z,1516684974.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:54.454Z,1516684974.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:54.859Z,1516684974.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:55.255Z,1516684975.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:55.655Z,1516684975.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:56.046Z,1516684976.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:56.451Z,1516684976.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:56.854Z,1516684976.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:57.259Z,1516684977.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:57.658Z,1516684977.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:58.063Z,1516684978.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:58.451Z,1516684978.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:58.857Z,1516684978.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:59.235Z,1516684979.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:22:59.641Z,1516684979.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:00.065Z,1516684980.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:00.450Z,1516684980.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:00.868Z,1516684980.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:01.266Z,1516684981.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:01.647Z,1516684981.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:02.043Z,1516684982.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:02.444Z,1516684982.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:02.841Z,1516684982.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:03.249Z,1516684983.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:03.673Z,1516684983.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:04.075Z,1516684984.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:04.449Z,1516684984.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:04.844Z,1516684984.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:05.243Z,1516684985.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:05.653Z,1516684985.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:06.043Z,1516684986.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:06.452Z,1516684986.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:06.854Z,1516684986.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:07.253Z,1516684987.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:07.645Z,1516684987.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:08.044Z,1516684988.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:08.445Z,1516684988.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:08.853Z,1516684988.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:09.257Z,1516684989.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:09.657Z,1516684989.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:10.056Z,1516684990.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:10.447Z,1516684990.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:10.843Z,1516684990.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:11.252Z,1516684991.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:11.657Z,1516684991.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:12.053Z,1516684992.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:12.443Z,1516684992.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:12.844Z,1516684992.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:13.250Z,1516684993.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:13.649Z,1516684993.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:14.053Z,1516684994.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:14.445Z,1516684994.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:14.843Z,1516684994.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:15.261Z,1516684995.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:15.657Z,1516684995.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:16.053Z,1516684996.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:16.447Z,1516684996.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:16.846Z,1516684996.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:17.260Z,1516684997.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:17.658Z,1516684997.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:18.065Z,1516684998.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:18.445Z,1516684998.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:18.849Z,1516684998.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:19.261Z,1516684999.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:19.658Z,1516684999.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:20.065Z,1516685000.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:20.453Z,1516685000.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:20.861Z,1516685000.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:21.257Z,1516685001.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:21.658Z,1516685001.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:22.056Z,1516685002.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:22.449Z,1516685002.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:22.846Z,1516685002.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:23.256Z,1516685003.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:23.659Z,1516685003.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:24.054Z,1516685004.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:24.449Z,1516685004.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:24.846Z,1516685004.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:25.257Z,1516685005.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:25.659Z,1516685005.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:26.054Z,1516685006.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:26.452Z,1516685006.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:26.855Z,1516685006.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:27.255Z,1516685007.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:27.674Z,1516685007.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:28.064Z,1516685008.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:28.452Z,1516685008.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:28.852Z,1516685008.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:29.254Z,1516685009.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:29.659Z,1516685009.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:30.055Z,1516685010.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:30.452Z,1516685010.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:30.845Z,1516685010.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:31.265Z,1516685011.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:31.662Z,1516685011.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:32.057Z,1516685012.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:32.452Z,1516685012.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:32.862Z,1516685012.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:33.257Z,1516685013.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:33.665Z,1516685013.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:34.060Z,1516685014.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:34.450Z,1516685014.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:34.849Z,1516685014.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:35.254Z,1516685015.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:35.655Z,1516685015.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:36.065Z,1516685016.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:36.447Z,1516685016.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:36.845Z,1516685016.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:37.265Z,1516685017.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:37.658Z,1516685017.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:38.055Z,1516685018.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:38.451Z,1516685018.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:38.856Z,1516685018.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:39.256Z,1516685019.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:39.660Z,1516685019.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:40.060Z,1516685020.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:40.449Z,1516685020.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:40.852Z,1516685020.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:41.257Z,1516685021.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:41.658Z,1516685021.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:42.062Z,1516685022.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:42.461Z,1516685022.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:42.833Z,1516685022.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:43.241Z,1516685023.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:43.643Z,1516685023.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:44.033Z,1516685024.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:44.473Z,1516685024.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:44.866Z,1516685024.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:45.259Z,1516685025.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:48.368Z,1516685028.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:48.516Z,1516685028.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:48.841Z,1516685028.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:49.250Z,1516685029.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:49.649Z,1516685029.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:50.033Z,1516685030.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:50.442Z,1516685030.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:50.836Z,1516685030.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:51.239Z,1516685031.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:51.647Z,1516685031.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:52.045Z,1516685032.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:52.442Z,1516685032.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:52.840Z,1516685032.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:53.240Z,1516685033.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:53.639Z,1516685033.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:54.045Z,1516685034.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:54.446Z,1516685034.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:54.847Z,1516685034.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:55.229Z,1516685035.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:55.249Z,1516685035.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:55.609Z,1516685035.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:55.645Z,1516685035.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:56.009Z,1516685036.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:56.045Z,1516685036.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:56.446Z,1516685036.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:56.836Z,1516685036.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:57.245Z,1516685037.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:57.624Z,1516685037.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:57.653Z,1516685037.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:58.024Z,1516685038.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:58.050Z,1516685038.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:58.420Z,1516685038.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:58.446Z,1516685038.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:58.446Z,1516685038.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-01-23T05:23:58.446Z,1516685038.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:23:58.452Z,1516685038.452 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:58.452Z,1516685038.452 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-01-23T05:23:58.452Z,1516685038.452 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:23:58.454Z,1516685038.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:23:58.454Z,1516685038.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43 2018-01-23T05:23:58.454Z,1516685038.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:23:58.478Z,1516685038.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:23:58.478Z,1516685038.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:23:58.481Z,1516685038.481 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:23:58.819Z,1516685038.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:58.864Z,1516685038.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:23:58.864Z,1516685038.864 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-01-23T05:23:58.865Z,1516685038.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:23:58.865Z,1516685038.865 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-01-23T05:23:58.865Z,1516685038.865 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:23:58.865Z,1516685038.865 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43 2018-01-23T05:23:59.214Z,1516685039.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:59.236Z,1516685039.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:23:59.236Z,1516685039.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:23:59.236Z,1516685039.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:23:59.237Z,1516685039.237 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:23:59.237Z,1516685039.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:23:59.237Z,1516685039.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:23:59.238Z,1516685039.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:23:59.238Z,1516685039.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:23:59.239Z,1516685039.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:23:59.614Z,1516685039.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:23:59.641Z,1516685039.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:23:59.642Z,1516685039.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:00.024Z,1516685040.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:00.038Z,1516685040.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:24:00.039Z,1516685040.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:00.424Z,1516685040.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:00.442Z,1516685040.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:24:00.447Z,1516685040.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:00.832Z,1516685040.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:00.852Z,1516685040.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:24:00.853Z,1516685040.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:01.252Z,1516685041.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:24:01.253Z,1516685041.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:01.664Z,1516685041.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:24:01.665Z,1516685041.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:02.045Z,1516685042.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:24:02.046Z,1516685042.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:02.447Z,1516685042.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:24:02.448Z,1516685042.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:02.828Z,1516685042.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:24:02.829Z,1516685042.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:03.233Z,1516685043.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:24:03.234Z,1516685043.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:03.662Z,1516685043.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:24:03.663Z,1516685043.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:04.061Z,1516685044.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:24:04.062Z,1516685044.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:04.455Z,1516685044.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:24:04.456Z,1516685044.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:04.834Z,1516685044.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:24:04.836Z,1516685044.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:05.232Z,1516685045.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:24:05.233Z,1516685045.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:05.640Z,1516685045.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:24:05.641Z,1516685045.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:06.036Z,1516685046.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:24:06.037Z,1516685046.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:06.446Z,1516685046.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:24:06.463Z,1516685046.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:06.841Z,1516685046.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:24:06.842Z,1516685046.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:07.241Z,1516685047.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:24:07.242Z,1516685047.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:07.633Z,1516685047.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:24:07.634Z,1516685047.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:08.031Z,1516685048.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:24:08.032Z,1516685048.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:08.444Z,1516685048.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:24:08.445Z,1516685048.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:08.834Z,1516685048.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:24:08.835Z,1516685048.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:09.240Z,1516685049.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:24:09.241Z,1516685049.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:09.647Z,1516685049.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:24:09.648Z,1516685049.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:10.052Z,1516685050.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:24:10.053Z,1516685050.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:10.442Z,1516685050.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:24:10.443Z,1516685050.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:10.843Z,1516685050.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:24:10.844Z,1516685050.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:11.244Z,1516685051.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:24:11.245Z,1516685051.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:11.639Z,1516685051.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:24:11.640Z,1516685051.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:12.008Z,1516685052.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:12.044Z,1516685052.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:24:12.045Z,1516685052.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:12.428Z,1516685052.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:12.442Z,1516685052.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:24:12.443Z,1516685052.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:12.832Z,1516685052.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:12.846Z,1516685052.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:24:12.847Z,1516685052.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:13.229Z,1516685053.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:13.242Z,1516685053.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:24:13.243Z,1516685053.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:13.609Z,1516685053.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:13.634Z,1516685053.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:24:13.635Z,1516685053.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:14.009Z,1516685054.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:14.040Z,1516685054.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:24:14.041Z,1516685054.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:14.409Z,1516685054.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:14.437Z,1516685054.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:24:14.437Z,1516685054.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:14.814Z,1516685054.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:14.839Z,1516685054.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:24:14.840Z,1516685054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:14.853Z,1516685054.853 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:24:15.209Z,1516685055.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:15.234Z,1516685055.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:24:15.235Z,1516685055.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:15.627Z,1516685055.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:15.645Z,1516685055.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:24:15.646Z,1516685055.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:16.030Z,1516685056.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:16.049Z,1516685056.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:24:16.050Z,1516685056.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:16.428Z,1516685056.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:16.449Z,1516685056.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:24:16.449Z,1516685056.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:16.809Z,1516685056.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:16.845Z,1516685056.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:24:16.846Z,1516685056.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:17.213Z,1516685057.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:17.238Z,1516685057.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:24:17.239Z,1516685057.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:17.610Z,1516685057.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:17.636Z,1516685057.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:24:17.637Z,1516685057.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:18.008Z,1516685058.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:18.022Z,1516685058.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:24:18.047Z,1516685058.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:18.420Z,1516685058.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:18.445Z,1516685058.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:24:18.446Z,1516685058.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:18.824Z,1516685058.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:18.857Z,1516685058.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:19.220Z,1516685059.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:19.247Z,1516685059.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:19.613Z,1516685059.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:19.662Z,1516685059.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:20.009Z,1516685060.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:24:20.045Z,1516685060.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:20.427Z,1516685060.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:20.856Z,1516685060.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:21.237Z,1516685061.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:21.663Z,1516685061.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:22.042Z,1516685062.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:22.446Z,1516685062.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:22.835Z,1516685062.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:23.241Z,1516685063.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:23.633Z,1516685063.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:24.031Z,1516685064.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:24.441Z,1516685064.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:24.842Z,1516685064.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:25.244Z,1516685065.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:25.634Z,1516685065.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:26.031Z,1516685066.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:26.431Z,1516685066.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:26.833Z,1516685066.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:27.231Z,1516685067.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:27.637Z,1516685067.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:28.038Z,1516685068.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:28.441Z,1516685068.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:28.831Z,1516685068.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:29.235Z,1516685069.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:29.633Z,1516685069.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:30.031Z,1516685070.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:30.441Z,1516685070.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:30.838Z,1516685070.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:31.240Z,1516685071.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:31.635Z,1516685071.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:32.036Z,1516685072.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:32.431Z,1516685072.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:32.832Z,1516685072.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:33.231Z,1516685073.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:33.638Z,1516685073.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:34.038Z,1516685074.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:34.441Z,1516685074.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:34.833Z,1516685074.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:35.232Z,1516685075.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:35.634Z,1516685075.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:36.033Z,1516685076.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:36.450Z,1516685076.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:36.842Z,1516685076.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:37.243Z,1516685077.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:37.632Z,1516685077.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:38.044Z,1516685078.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:38.439Z,1516685078.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:38.838Z,1516685078.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:39.235Z,1516685079.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:39.650Z,1516685079.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:40.050Z,1516685080.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:40.453Z,1516685080.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:40.845Z,1516685080.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:41.241Z,1516685081.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:41.639Z,1516685081.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:42.041Z,1516685082.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:42.447Z,1516685082.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:42.848Z,1516685082.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:43.253Z,1516685083.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:43.621Z,1516685083.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:44.048Z,1516685084.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:44.452Z,1516685084.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:44.848Z,1516685084.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:45.245Z,1516685085.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:45.659Z,1516685085.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:48.751Z,1516685088.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:48.898Z,1516685088.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:49.221Z,1516685089.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:49.627Z,1516685089.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:50.019Z,1516685090.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:50.429Z,1516685090.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:50.829Z,1516685090.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:51.230Z,1516685091.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:51.622Z,1516685091.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:52.019Z,1516685092.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:52.452Z,1516685092.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:52.825Z,1516685092.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:53.223Z,1516685093.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:53.629Z,1516685093.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:54.030Z,1516685094.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:54.456Z,1516685094.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:54.824Z,1516685094.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:55.219Z,1516685095.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:55.624Z,1516685095.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:56.034Z,1516685096.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:56.426Z,1516685096.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:56.829Z,1516685096.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:57.228Z,1516685097.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:57.621Z,1516685097.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:58.023Z,1516685098.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:58.425Z,1516685098.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:58.826Z,1516685098.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:59.222Z,1516685099.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:24:59.654Z,1516685099.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:00.030Z,1516685100.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:00.428Z,1516685100.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:00.826Z,1516685100.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:01.224Z,1516685101.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:01.624Z,1516685101.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:02.032Z,1516685102.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:02.427Z,1516685102.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:02.825Z,1516685102.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:03.238Z,1516685103.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:03.626Z,1516685103.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:04.022Z,1516685104.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:04.425Z,1516685104.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:04.833Z,1516685104.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:05.223Z,1516685105.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:05.637Z,1516685105.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:06.030Z,1516685106.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:06.436Z,1516685106.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:06.825Z,1516685106.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:07.223Z,1516685107.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:07.623Z,1516685107.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:08.027Z,1516685108.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:08.437Z,1516685108.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:08.832Z,1516685108.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:09.230Z,1516685109.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:09.626Z,1516685109.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:10.033Z,1516685110.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:10.425Z,1516685110.425 [PNI_TCM](ERROR): CRC does not match. Expected:0x32445 got:0x51328 2018-01-23T05:25:10.459Z,1516685110.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:10.834Z,1516685110.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:11.233Z,1516685111.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:11.641Z,1516685111.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:12.019Z,1516685112.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x35774 got:0x33964 2018-01-23T05:25:12.045Z,1516685112.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:12.440Z,1516685112.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:12.841Z,1516685112.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:13.233Z,1516685113.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:13.633Z,1516685113.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:14.033Z,1516685114.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:14.445Z,1516685114.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:14.844Z,1516685114.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:15.234Z,1516685115.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:15.628Z,1516685115.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:16.027Z,1516685116.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:16.437Z,1516685116.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:16.853Z,1516685116.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:17.288Z,1516685117.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:17.637Z,1516685117.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:18.064Z,1516685118.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:18.465Z,1516685118.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:18.840Z,1516685118.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:19.235Z,1516685119.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:19.635Z,1516685119.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:20.030Z,1516685120.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:20.439Z,1516685120.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:20.838Z,1516685120.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:21.249Z,1516685121.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:21.620Z,1516685121.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T05:25:21.668Z,1516685121.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:22.019Z,1516685122.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x18948 got:0x23068 2018-01-23T05:25:22.038Z,1516685122.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:22.450Z,1516685122.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:22.881Z,1516685122.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:23.249Z,1516685123.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:23.640Z,1516685123.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:24.080Z,1516685124.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:24.485Z,1516685124.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:24.861Z,1516685124.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:25.259Z,1516685125.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:25.660Z,1516685125.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:26.043Z,1516685126.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:26.449Z,1516685126.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:26.861Z,1516685126.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:27.250Z,1516685127.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:27.661Z,1516685127.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:28.071Z,1516685128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:28.446Z,1516685128.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:28.862Z,1516685128.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:29.264Z,1516685129.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:29.660Z,1516685129.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:30.065Z,1516685130.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:30.474Z,1516685130.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:30.862Z,1516685130.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:31.267Z,1516685131.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:31.665Z,1516685131.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:32.049Z,1516685132.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:32.457Z,1516685132.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:32.838Z,1516685132.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:33.241Z,1516685133.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:33.624Z,1516685133.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:33.997Z,1516685133.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:34.042Z,1516685134.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:34.412Z,1516685134.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:34.440Z,1516685134.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:34.812Z,1516685134.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:34.850Z,1516685134.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:35.208Z,1516685135.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:35.241Z,1516685135.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:35.597Z,1516685135.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:35.612Z,1516685135.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:35.998Z,1516685135.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:36.012Z,1516685136.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:36.401Z,1516685136.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:36.415Z,1516685136.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:36.812Z,1516685136.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:36.846Z,1516685136.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:37.216Z,1516685137.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:37.230Z,1516685137.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:37.620Z,1516685137.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:37.634Z,1516685137.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:38.003Z,1516685138.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:38.017Z,1516685138.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:38.402Z,1516685138.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:38.435Z,1516685138.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:38.807Z,1516685138.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:38.821Z,1516685138.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:39.204Z,1516685139.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:39.222Z,1516685139.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:39.616Z,1516685139.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:39.630Z,1516685139.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:40.015Z,1516685140.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:40.033Z,1516685140.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:40.414Z,1516685140.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:40.433Z,1516685140.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:40.805Z,1516685140.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:40.820Z,1516685140.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:41.206Z,1516685141.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:41.220Z,1516685141.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:41.600Z,1516685141.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:41.620Z,1516685141.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:42.004Z,1516685142.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:42.023Z,1516685142.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:42.406Z,1516685142.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:42.420Z,1516685142.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:42.812Z,1516685142.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:42.830Z,1516685142.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:43.218Z,1516685143.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:43.240Z,1516685143.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:43.620Z,1516685143.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:43.641Z,1516685143.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:43.999Z,1516685143.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:44.026Z,1516685144.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:44.409Z,1516685144.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:25:44.423Z,1516685144.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:44.824Z,1516685144.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:45.221Z,1516685145.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:45.630Z,1516685145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:46.040Z,1516685146.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:49.125Z,1516685149.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:49.268Z,1516685149.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:49.591Z,1516685149.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:50.013Z,1516685150.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:50.401Z,1516685150.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:50.802Z,1516685150.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:51.203Z,1516685151.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:51.609Z,1516685151.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:51.995Z,1516685151.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:52.395Z,1516685152.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:52.796Z,1516685152.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:53.206Z,1516685153.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:53.607Z,1516685153.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:53.949Z,1516685153.949 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:25:53.950Z,1516685153.950 [NAL9602] Data Fault, FailCount= 2 2018-01-23T05:25:53.950Z,1516685153.950 [NAL9602](ERROR): Data Fault 2018-01-23T05:25:54.015Z,1516685154.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:54.048Z,1516685154.048 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:25:54.352Z,1516685154.352 [NAL9602](INFO): Powering down 2018-01-23T05:25:54.401Z,1516685154.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:54.796Z,1516685154.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:55.201Z,1516685155.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:55.214Z,1516685155.214 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T05:25:55.214Z,1516685155.214 [NAL9602] No Fault, FailCount= 2 2018-01-23T05:25:55.601Z,1516685155.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:56.004Z,1516685156.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:56.395Z,1516685156.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:56.799Z,1516685156.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:57.194Z,1516685157.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:57.600Z,1516685157.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:58.005Z,1516685158.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:58.395Z,1516685158.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:58.789Z,1516685158.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:59.199Z,1516685159.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:59.603Z,1516685159.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:25:59.983Z,1516685159.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:00.382Z,1516685160.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:00.811Z,1516685160.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:01.184Z,1516685161.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:01.610Z,1516685161.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:02.013Z,1516685162.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:02.410Z,1516685162.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:02.810Z,1516685162.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:03.212Z,1516685163.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:03.584Z,1516685163.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:03.989Z,1516685163.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:04.388Z,1516685164.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:04.780Z,1516685164.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:05.182Z,1516685165.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:05.584Z,1516685165.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:06.037Z,1516685166.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:06.425Z,1516685166.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:06.801Z,1516685166.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:07.188Z,1516685167.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:07.602Z,1516685167.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:07.986Z,1516685167.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:08.380Z,1516685168.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:08.809Z,1516685168.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:09.190Z,1516685169.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:09.583Z,1516685169.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:10.017Z,1516685170.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:10.391Z,1516685170.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:10.787Z,1516685170.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:11.192Z,1516685171.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:11.597Z,1516685171.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:11.987Z,1516685171.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:12.397Z,1516685172.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:12.789Z,1516685172.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:13.187Z,1516685173.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:13.590Z,1516685173.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:13.997Z,1516685173.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:14.389Z,1516685174.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:14.795Z,1516685174.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:15.196Z,1516685175.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:15.587Z,1516685175.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:15.990Z,1516685175.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:16.388Z,1516685176.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:16.787Z,1516685176.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:17.196Z,1516685177.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:17.591Z,1516685177.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:17.988Z,1516685177.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:18.398Z,1516685178.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:18.790Z,1516685178.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:19.188Z,1516685179.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:19.593Z,1516685179.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:19.990Z,1516685179.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:20.391Z,1516685180.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:20.803Z,1516685180.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:21.190Z,1516685181.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:21.588Z,1516685181.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:21.999Z,1516685181.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:22.401Z,1516685182.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:22.796Z,1516685182.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:23.197Z,1516685183.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:23.593Z,1516685183.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:23.988Z,1516685183.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:24.399Z,1516685184.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:24.760Z,1516685184.760 [NAL9602](INFO): Powering up NAL9602 2018-01-23T05:26:24.806Z,1516685184.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:25.188Z,1516685185.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:25.603Z,1516685185.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:26.004Z,1516685186.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:26.404Z,1516685186.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:26.804Z,1516685186.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:27.204Z,1516685187.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:27.580Z,1516685187.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:28.009Z,1516685188.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:28.383Z,1516685188.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:28.801Z,1516685188.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:29.217Z,1516685189.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:29.588Z,1516685189.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:29.985Z,1516685189.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:30.397Z,1516685190.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:30.790Z,1516685190.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:31.188Z,1516685191.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:31.593Z,1516685191.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:31.991Z,1516685191.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:32.390Z,1516685192.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:32.797Z,1516685192.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:33.192Z,1516685193.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:33.588Z,1516685193.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:33.997Z,1516685193.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:34.391Z,1516685194.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:34.787Z,1516685194.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:35.190Z,1516685195.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:35.594Z,1516685195.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:35.961Z,1516685195.961 [NAL9602](INFO): NAL9602 initialized 2018-01-23T05:26:35.993Z,1516685195.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:36.442Z,1516685196.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:36.797Z,1516685196.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:37.194Z,1516685197.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:37.591Z,1516685197.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:37.992Z,1516685197.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:38.393Z,1516685198.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:38.795Z,1516685198.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:39.198Z,1516685199.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:39.601Z,1516685199.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:39.993Z,1516685199.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:40.392Z,1516685200.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:40.790Z,1516685200.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:41.191Z,1516685201.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:41.594Z,1516685201.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:41.994Z,1516685201.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:42.394Z,1516685202.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:42.790Z,1516685202.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:43.190Z,1516685203.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:43.590Z,1516685203.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:43.996Z,1516685203.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:43.000Z,1516685204.000 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:21:43.7Z 2018-01-23T05:26:44.000Z,1516685204.000 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:26:44.000Z,1516685204.000 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:26:44.391Z,1516685204.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:44.932Z,1516685204.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:45.205Z,1516685205.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:48.388Z,1516685208.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:48.468Z,1516685208.468 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0052.lzma 2018-01-23T05:26:48.538Z,1516685208.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:48.852Z,1516685208.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:49.209Z,1516685209.209 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0052.lzma.bak 2018-01-23T05:26:49.209Z,1516685209.209 [DataOverHttps](INFO): SBD MOMSN=7755063 2018-01-23T05:26:49.277Z,1516685209.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:49.887Z,1516685209.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:50.080Z,1516685210.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:53.163Z,1516685213.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:53.312Z,1516685213.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:53.686Z,1516685213.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:54.059Z,1516685214.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:54.456Z,1516685214.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:54.857Z,1516685214.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:57.951Z,1516685217.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:58.031Z,1516685218.031 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0053.lzma 2018-01-23T05:26:58.112Z,1516685218.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:58.436Z,1516685218.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:58.780Z,1516685218.780 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0053.lzma.bak 2018-01-23T05:26:58.780Z,1516685218.780 [DataOverHttps](INFO): SBD MOMSN=7755065 2018-01-23T05:26:58.853Z,1516685218.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:59.446Z,1516685219.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:59.446Z,1516685219.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-01-23T05:26:59.446Z,1516685219.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:26:59.448Z,1516685219.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:59.448Z,1516685219.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-01-23T05:26:59.448Z,1516685219.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:26:59.450Z,1516685219.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:26:59.450Z,1516685219.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44 2018-01-23T05:26:59.450Z,1516685219.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:26:59.452Z,1516685219.452 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:26:59.452Z,1516685219.452 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:26:59.452Z,1516685219.452 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:26:59.463Z,1516685219.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:26:59.463Z,1516685219.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:26:59.463Z,1516685219.463 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:26:59.655Z,1516685219.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:26:59.655Z,1516685219.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-01-23T05:26:59.655Z,1516685219.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:26:59.656Z,1516685219.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-01-23T05:26:59.656Z,1516685219.656 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:26:59.656Z,1516685219.656 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44 2018-01-23T05:27:02.714Z,1516685222.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:27:02.714Z,1516685222.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:27:02.714Z,1516685222.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:27:02.715Z,1516685222.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:27:02.715Z,1516685222.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:27:02.715Z,1516685222.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:27:02.716Z,1516685222.716 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:27:02.716Z,1516685222.716 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:27:02.717Z,1516685222.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:27:02.872Z,1516685222.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s. 2018-01-23T05:27:02.873Z,1516685222.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:03.220Z,1516685223.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s. 2018-01-23T05:27:03.221Z,1516685223.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:03.645Z,1516685223.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s. 2018-01-23T05:27:03.646Z,1516685223.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:04.020Z,1516685224.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s. 2018-01-23T05:27:04.021Z,1516685224.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:04.409Z,1516685224.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s. 2018-01-23T05:27:04.409Z,1516685224.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:04.815Z,1516685224.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s. 2018-01-23T05:27:04.816Z,1516685224.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:05.208Z,1516685225.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s. 2018-01-23T05:27:05.209Z,1516685225.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:05.618Z,1516685225.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s. 2018-01-23T05:27:05.619Z,1516685225.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:06.017Z,1516685226.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s. 2018-01-23T05:27:06.018Z,1516685226.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:06.422Z,1516685226.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s. 2018-01-23T05:27:06.423Z,1516685226.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:06.816Z,1516685226.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s. 2018-01-23T05:27:06.817Z,1516685226.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:07.208Z,1516685227.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s. 2018-01-23T05:27:07.209Z,1516685227.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:07.616Z,1516685227.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s. 2018-01-23T05:27:07.617Z,1516685227.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:08.011Z,1516685228.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s. 2018-01-23T05:27:08.012Z,1516685228.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:08.410Z,1516685228.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s. 2018-01-23T05:27:08.411Z,1516685228.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:08.818Z,1516685228.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s. 2018-01-23T05:27:08.819Z,1516685228.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:09.221Z,1516685229.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T05:27:09.222Z,1516685229.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:09.624Z,1516685229.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s. 2018-01-23T05:27:09.625Z,1516685229.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:10.010Z,1516685230.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s. 2018-01-23T05:27:10.011Z,1516685230.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:10.419Z,1516685230.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s. 2018-01-23T05:27:10.420Z,1516685230.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:10.804Z,1516685230.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s. 2018-01-23T05:27:10.805Z,1516685230.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:11.201Z,1516685231.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s. 2018-01-23T05:27:11.202Z,1516685231.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:11.629Z,1516685231.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s. 2018-01-23T05:27:11.629Z,1516685231.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:12.029Z,1516685232.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s. 2018-01-23T05:27:12.030Z,1516685232.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:12.429Z,1516685232.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s. 2018-01-23T05:27:12.430Z,1516685232.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:12.831Z,1516685232.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s. 2018-01-23T05:27:12.832Z,1516685232.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:13.202Z,1516685233.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s. 2018-01-23T05:27:13.204Z,1516685233.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:13.600Z,1516685233.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s. 2018-01-23T05:27:13.601Z,1516685233.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:14.012Z,1516685234.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s. 2018-01-23T05:27:14.013Z,1516685234.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:14.408Z,1516685234.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s. 2018-01-23T05:27:14.409Z,1516685234.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:14.810Z,1516685234.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s. 2018-01-23T05:27:14.811Z,1516685234.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:15.237Z,1516685235.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s. 2018-01-23T05:27:15.238Z,1516685235.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:15.610Z,1516685235.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s. 2018-01-23T05:27:15.611Z,1516685235.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:16.009Z,1516685236.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s. 2018-01-23T05:27:16.010Z,1516685236.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:16.489Z,1516685236.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s. 2018-01-23T05:27:16.490Z,1516685236.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:16.804Z,1516685236.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s. 2018-01-23T05:27:16.805Z,1516685236.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:17.197Z,1516685237.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s. 2018-01-23T05:27:17.198Z,1516685237.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:17.610Z,1516685237.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s. 2018-01-23T05:27:17.611Z,1516685237.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:18.013Z,1516685238.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s. 2018-01-23T05:27:18.014Z,1516685238.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:18.420Z,1516685238.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s. 2018-01-23T05:27:18.421Z,1516685238.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:18.801Z,1516685238.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T05:27:18.802Z,1516685238.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:19.203Z,1516685239.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s. 2018-01-23T05:27:19.204Z,1516685239.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:19.601Z,1516685239.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:20.005Z,1516685240.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:20.404Z,1516685240.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:20.811Z,1516685240.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:21.233Z,1516685241.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:21.627Z,1516685241.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:22.018Z,1516685242.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:22.410Z,1516685242.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:22.805Z,1516685242.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:23.197Z,1516685243.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:23.628Z,1516685243.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:24.029Z,1516685244.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:24.426Z,1516685244.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:24.825Z,1516685244.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:25.227Z,1516685245.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:25.605Z,1516685245.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:26.008Z,1516685246.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:26.404Z,1516685246.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:26.829Z,1516685246.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:27.238Z,1516685247.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:27.638Z,1516685247.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:28.003Z,1516685248.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:28.407Z,1516685248.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:28.816Z,1516685248.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:29.209Z,1516685249.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:29.622Z,1516685249.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:30.024Z,1516685250.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:30.414Z,1516685250.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:30.809Z,1516685250.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:31.208Z,1516685251.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:31.606Z,1516685251.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:32.015Z,1516685252.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:32.409Z,1516685252.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:32.825Z,1516685252.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:33.218Z,1516685253.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:33.618Z,1516685253.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:34.006Z,1516685254.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:34.410Z,1516685254.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:34.813Z,1516685254.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:35.208Z,1516685255.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:35.618Z,1516685255.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:36.031Z,1516685256.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:36.425Z,1516685256.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:36.809Z,1516685256.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:37.212Z,1516685257.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:37.616Z,1516685257.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:38.015Z,1516685258.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:38.386Z,1516685258.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:38.421Z,1516685258.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:38.808Z,1516685258.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:38.823Z,1516685258.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:39.207Z,1516685259.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:39.221Z,1516685259.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:39.604Z,1516685259.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:39.624Z,1516685259.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:39.985Z,1516685259.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:40.017Z,1516685260.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:40.385Z,1516685260.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:40.417Z,1516685260.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:40.786Z,1516685260.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:40.821Z,1516685260.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:41.189Z,1516685261.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:41.221Z,1516685261.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:41.596Z,1516685261.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:41.630Z,1516685261.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:42.008Z,1516685262.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:42.027Z,1516685262.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:42.396Z,1516685262.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:42.429Z,1516685262.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:42.785Z,1516685262.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:42.821Z,1516685262.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:43.185Z,1516685263.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:43.216Z,1516685263.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:43.585Z,1516685263.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:43.621Z,1516685263.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:43.990Z,1516685263.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:27:44.004Z,1516685264.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:44.433Z,1516685264.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:44.835Z,1516685264.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:45.231Z,1516685265.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:45.633Z,1516685265.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:46.012Z,1516685266.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:46.412Z,1516685266.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:46.810Z,1516685266.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:47.207Z,1516685267.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:47.611Z,1516685267.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:48.015Z,1516685268.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:48.411Z,1516685268.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:48.813Z,1516685268.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:49.218Z,1516685269.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:49.609Z,1516685269.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:50.007Z,1516685270.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:50.407Z,1516685270.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:50.811Z,1516685270.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:51.221Z,1516685271.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:51.621Z,1516685271.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:52.018Z,1516685272.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:52.418Z,1516685272.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:52.809Z,1516685272.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:53.217Z,1516685273.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:53.621Z,1516685273.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:54.018Z,1516685274.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:54.421Z,1516685274.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:54.817Z,1516685274.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:55.212Z,1516685275.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:55.613Z,1516685275.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:56.014Z,1516685276.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:56.425Z,1516685276.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:56.822Z,1516685276.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:57.222Z,1516685277.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:57.632Z,1516685277.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:58.020Z,1516685278.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:58.420Z,1516685278.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:58.822Z,1516685278.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:59.220Z,1516685279.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:27:59.628Z,1516685279.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:00.024Z,1516685280.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:03.121Z,1516685283.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:03.256Z,1516685283.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:03.593Z,1516685283.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:03.993Z,1516685283.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:04.393Z,1516685284.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:04.794Z,1516685284.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:05.180Z,1516685285.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:05.201Z,1516685285.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:05.578Z,1516685285.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:05.597Z,1516685285.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:05.973Z,1516685285.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:05.987Z,1516685285.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:06.401Z,1516685286.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:06.787Z,1516685286.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:07.195Z,1516685287.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:07.580Z,1516685287.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:07.594Z,1516685287.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:07.980Z,1516685287.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:07.994Z,1516685287.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:08.377Z,1516685288.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:08.397Z,1516685288.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:08.775Z,1516685288.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:08.790Z,1516685288.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:09.168Z,1516685289.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:09.188Z,1516685289.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:09.578Z,1516685289.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:09.597Z,1516685289.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:09.980Z,1516685289.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:09.994Z,1516685289.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:10.378Z,1516685290.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:10.397Z,1516685290.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:10.772Z,1516685290.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:10.790Z,1516685290.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:11.174Z,1516685291.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:11.189Z,1516685291.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:11.578Z,1516685291.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:11.597Z,1516685291.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:11.980Z,1516685291.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:11.994Z,1516685291.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:12.379Z,1516685292.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:12.394Z,1516685292.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:12.779Z,1516685292.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:12.793Z,1516685292.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:13.173Z,1516685293.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:28:13.187Z,1516685293.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:13.616Z,1516685293.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:13.997Z,1516685293.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:14.394Z,1516685294.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:14.792Z,1516685294.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:15.195Z,1516685295.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:15.597Z,1516685295.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:15.998Z,1516685295.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:16.397Z,1516685296.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:16.789Z,1516685296.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:17.194Z,1516685297.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:17.597Z,1516685297.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:18.005Z,1516685298.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:18.408Z,1516685298.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:18.792Z,1516685298.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:19.197Z,1516685299.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:19.598Z,1516685299.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:20.005Z,1516685300.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:20.398Z,1516685300.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:20.793Z,1516685300.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:21.189Z,1516685301.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:21.608Z,1516685301.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:22.005Z,1516685302.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:22.406Z,1516685302.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:22.797Z,1516685302.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:23.197Z,1516685303.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:23.613Z,1516685303.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:24.012Z,1516685304.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:24.402Z,1516685304.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:24.797Z,1516685304.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:25.182Z,1516685305.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:25.581Z,1516685305.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:26.012Z,1516685306.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:26.417Z,1516685306.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:26.811Z,1516685306.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:27.189Z,1516685307.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:27.588Z,1516685307.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:27.997Z,1516685307.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:28.393Z,1516685308.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:28.790Z,1516685308.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:29.194Z,1516685309.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:29.623Z,1516685309.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:29.991Z,1516685309.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:30.388Z,1516685310.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:30.787Z,1516685310.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:31.196Z,1516685311.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:31.588Z,1516685311.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:31.997Z,1516685311.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:32.402Z,1516685312.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:32.797Z,1516685312.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:33.196Z,1516685313.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:33.592Z,1516685313.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:33.989Z,1516685313.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:34.388Z,1516685314.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:34.799Z,1516685314.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:35.204Z,1516685315.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:35.597Z,1516685315.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:35.990Z,1516685315.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:36.404Z,1516685316.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:36.789Z,1516685316.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:37.189Z,1516685317.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:37.592Z,1516685317.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:38.001Z,1516685318.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:38.402Z,1516685318.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:38.798Z,1516685318.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:39.189Z,1516685319.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:39.588Z,1516685319.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:39.992Z,1516685319.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:40.389Z,1516685320.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:40.799Z,1516685320.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:41.208Z,1516685321.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:41.613Z,1516685321.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:41.995Z,1516685321.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:42.391Z,1516685322.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:42.797Z,1516685322.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:43.196Z,1516685323.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:43.591Z,1516685323.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:44.001Z,1516685324.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:44.401Z,1516685324.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:44.812Z,1516685324.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:45.201Z,1516685325.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:45.597Z,1516685325.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:45.992Z,1516685325.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:46.401Z,1516685326.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:46.813Z,1516685326.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:47.202Z,1516685327.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:47.601Z,1516685327.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:47.993Z,1516685327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:48.401Z,1516685328.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:48.797Z,1516685328.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:49.195Z,1516685329.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:49.596Z,1516685329.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:50.013Z,1516685330.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:50.409Z,1516685330.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:50.807Z,1516685330.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:51.201Z,1516685331.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:51.601Z,1516685331.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:51.996Z,1516685331.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:52.391Z,1516685332.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:52.805Z,1516685332.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:53.205Z,1516685333.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:53.605Z,1516685333.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:53.999Z,1516685333.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:54.402Z,1516685334.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:54.795Z,1516685334.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:55.200Z,1516685335.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:55.597Z,1516685335.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:56.003Z,1516685336.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:56.403Z,1516685336.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:56.802Z,1516685336.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:57.197Z,1516685337.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:57.598Z,1516685337.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:58.006Z,1516685338.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:58.403Z,1516685338.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:58.810Z,1516685338.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:59.208Z,1516685339.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:28:59.605Z,1516685339.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:00.005Z,1516685340.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:00.413Z,1516685340.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:03.503Z,1516685343.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:03.609Z,1516685343.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:03.987Z,1516685343.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:04.414Z,1516685344.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:04.793Z,1516685344.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:05.187Z,1516685345.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:05.590Z,1516685345.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:05.977Z,1516685345.977 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T05:29:06.012Z,1516685346.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:06.393Z,1516685346.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:06.791Z,1516685346.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:07.211Z,1516685347.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:07.580Z,1516685347.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x48341 got:0x13084 2018-01-23T05:29:07.616Z,1516685347.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:07.967Z,1516685347.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:07.981Z,1516685347.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:08.363Z,1516685348.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:08.389Z,1516685348.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:08.769Z,1516685348.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:08.801Z,1516685348.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:09.167Z,1516685349.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:09.184Z,1516685349.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:09.572Z,1516685349.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:09.593Z,1516685349.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:09.978Z,1516685349.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:09.997Z,1516685349.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:10.380Z,1516685350.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:10.421Z,1516685350.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:10.778Z,1516685350.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:10.785Z,1516685350.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x47153 got:0x160 2018-01-23T05:29:10.822Z,1516685350.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:11.160Z,1516685351.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:11.189Z,1516685351.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:11.570Z,1516685351.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:11.576Z,1516685351.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x14738 got:0x51584 2018-01-23T05:29:11.597Z,1516685351.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:11.971Z,1516685351.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:12.005Z,1516685352.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:12.370Z,1516685352.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:12.388Z,1516685352.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:12.779Z,1516685352.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:12.793Z,1516685352.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:13.178Z,1516685353.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:13.204Z,1516685353.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:13.580Z,1516685353.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:13.626Z,1516685353.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:13.957Z,1516685353.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:13.997Z,1516685353.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:14.357Z,1516685354.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:14.380Z,1516685354.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x11359 got:0x6466 2018-01-23T05:29:14.405Z,1516685354.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:14.772Z,1516685354.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:14.787Z,1516685354.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:15.158Z,1516685355.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:15.190Z,1516685355.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:15.557Z,1516685355.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:15.594Z,1516685355.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:15.984Z,1516685355.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:15.999Z,1516685355.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:16.383Z,1516685356.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:16.398Z,1516685356.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:16.776Z,1516685356.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:16.809Z,1516685356.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:17.161Z,1516685357.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:17.190Z,1516685357.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:17.557Z,1516685357.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:17.596Z,1516685357.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:17.958Z,1516685357.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:17.987Z,1516685357.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:18.357Z,1516685358.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:18.388Z,1516685358.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:18.778Z,1516685358.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:18.796Z,1516685358.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:19.187Z,1516685359.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:19.201Z,1516685359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:19.579Z,1516685359.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:19.593Z,1516685359.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:19.957Z,1516685359.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:19.989Z,1516685359.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:20.361Z,1516685360.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:20.388Z,1516685360.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:20.757Z,1516685360.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:20.795Z,1516685360.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:21.158Z,1516685361.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:21.201Z,1516685361.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:21.561Z,1516685361.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:21.586Z,1516685361.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:21.976Z,1516685361.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:21.993Z,1516685361.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:22.382Z,1516685362.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:22.398Z,1516685362.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:22.777Z,1516685362.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:22.797Z,1516685362.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:23.157Z,1516685363.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:23.185Z,1516685363.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:23.557Z,1516685363.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:23.597Z,1516685363.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:23.962Z,1516685363.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:23.992Z,1516685363.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:24.357Z,1516685364.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:24.395Z,1516685364.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:24.777Z,1516685364.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:24.792Z,1516685364.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:25.178Z,1516685365.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:25.201Z,1516685365.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:25.579Z,1516685365.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:25.597Z,1516685365.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:25.957Z,1516685365.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:25.994Z,1516685365.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:26.361Z,1516685366.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:26.436Z,1516685366.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:26.757Z,1516685366.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:26.793Z,1516685366.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:27.162Z,1516685367.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:27.176Z,1516685367.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:27.561Z,1516685367.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:27.598Z,1516685367.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:27.976Z,1516685367.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:28.001Z,1516685368.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:28.407Z,1516685368.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:28.802Z,1516685368.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:29.205Z,1516685369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:29.575Z,1516685369.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:29.984Z,1516685369.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:30.377Z,1516685370.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:30.789Z,1516685370.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:31.186Z,1516685371.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:31.594Z,1516685371.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:31.980Z,1516685371.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:32.379Z,1516685372.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:32.778Z,1516685372.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:33.180Z,1516685373.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:33.585Z,1516685373.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:33.992Z,1516685373.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:34.396Z,1516685374.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:34.793Z,1516685374.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:35.178Z,1516685375.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:35.579Z,1516685375.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:35.981Z,1516685375.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:36.385Z,1516685376.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:36.789Z,1516685376.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:37.189Z,1516685377.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:37.590Z,1516685377.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:37.981Z,1516685377.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:38.380Z,1516685378.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:38.782Z,1516685378.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:39.182Z,1516685379.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:39.589Z,1516685379.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:39.992Z,1516685379.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:40.396Z,1516685380.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:40.794Z,1516685380.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:41.183Z,1516685381.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:41.595Z,1516685381.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:41.988Z,1516685381.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:42.383Z,1516685382.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:42.797Z,1516685382.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:43.204Z,1516685383.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:43.596Z,1516685383.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:43.986Z,1516685383.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:44.382Z,1516685384.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:44.788Z,1516685384.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:45.197Z,1516685385.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:45.585Z,1516685385.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:46.001Z,1516685386.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:46.396Z,1516685386.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:46.782Z,1516685386.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:47.197Z,1516685387.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:47.584Z,1516685387.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:47.982Z,1516685387.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:48.381Z,1516685388.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:48.777Z,1516685388.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:48.791Z,1516685388.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:49.175Z,1516685389.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:49.190Z,1516685389.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:49.575Z,1516685389.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:29:49.590Z,1516685389.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:49.981Z,1516685389.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:50.383Z,1516685390.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:50.790Z,1516685390.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:51.181Z,1516685391.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:51.582Z,1516685391.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:51.997Z,1516685391.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:52.406Z,1516685392.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:52.799Z,1516685392.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:53.201Z,1516685393.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:53.576Z,1516685393.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:53.981Z,1516685393.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:54.379Z,1516685394.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:54.786Z,1516685394.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:55.182Z,1516685395.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:55.586Z,1516685395.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:55.980Z,1516685395.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:56.380Z,1516685396.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:56.789Z,1516685396.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:57.181Z,1516685397.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:57.584Z,1516685397.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:57.982Z,1516685397.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:58.386Z,1516685398.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:58.782Z,1516685398.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:59.191Z,1516685399.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:59.580Z,1516685399.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:29:59.981Z,1516685399.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:00.381Z,1516685400.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:00.796Z,1516685400.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:03.886Z,1516685403.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:03.887Z,1516685403.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-01-23T05:30:03.887Z,1516685403.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:30:03.889Z,1516685403.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:03.889Z,1516685403.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-01-23T05:30:03.889Z,1516685403.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:30:03.890Z,1516685403.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:03.891Z,1516685403.891 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45 2018-01-23T05:30:03.891Z,1516685403.891 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:30:03.927Z,1516685403.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:30:03.927Z,1516685403.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:30:03.927Z,1516685403.927 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:30:04.070Z,1516685404.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:30:04.070Z,1516685404.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-01-23T05:30:04.070Z,1516685404.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:30:04.075Z,1516685404.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-01-23T05:30:04.076Z,1516685404.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:30:04.076Z,1516685404.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45 2018-01-23T05:30:04.387Z,1516685404.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:30:04.388Z,1516685404.388 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:30:04.388Z,1516685404.388 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:30:04.388Z,1516685404.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:30:04.389Z,1516685404.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:30:04.389Z,1516685404.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:30:04.389Z,1516685404.389 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:30:04.390Z,1516685404.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:30:04.390Z,1516685404.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:30:04.793Z,1516685404.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T05:30:04.794Z,1516685404.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:05.187Z,1516685405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T05:30:05.188Z,1516685405.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:05.588Z,1516685405.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T05:30:05.589Z,1516685405.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:05.990Z,1516685405.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T05:30:05.991Z,1516685405.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:06.404Z,1516685406.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T05:30:06.405Z,1516685406.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:06.794Z,1516685406.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T05:30:06.795Z,1516685406.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:07.179Z,1516685407.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T05:30:07.180Z,1516685407.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:07.591Z,1516685407.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T05:30:07.592Z,1516685407.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:07.984Z,1516685407.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T05:30:07.984Z,1516685407.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:08.392Z,1516685408.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T05:30:08.393Z,1516685408.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:08.798Z,1516685408.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T05:30:08.803Z,1516685408.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:09.208Z,1516685409.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T05:30:09.209Z,1516685409.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:09.602Z,1516685409.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T05:30:09.603Z,1516685409.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:09.980Z,1516685409.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T05:30:09.981Z,1516685409.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:10.384Z,1516685410.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T05:30:10.385Z,1516685410.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:10.782Z,1516685410.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T05:30:10.783Z,1516685410.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:11.185Z,1516685411.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T05:30:11.186Z,1516685411.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:11.582Z,1516685411.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T05:30:11.583Z,1516685411.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:11.978Z,1516685411.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T05:30:11.979Z,1516685411.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:12.385Z,1516685412.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T05:30:12.386Z,1516685412.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:12.786Z,1516685412.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T05:30:12.787Z,1516685412.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:13.186Z,1516685413.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T05:30:13.187Z,1516685413.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:13.588Z,1516685413.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T05:30:13.589Z,1516685413.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:13.981Z,1516685413.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T05:30:13.982Z,1516685413.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:14.380Z,1516685414.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T05:30:14.381Z,1516685414.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:14.784Z,1516685414.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T05:30:14.785Z,1516685414.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:15.185Z,1516685415.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T05:30:15.186Z,1516685415.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:15.586Z,1516685415.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T05:30:15.587Z,1516685415.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:15.981Z,1516685415.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T05:30:15.982Z,1516685415.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:16.386Z,1516685416.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T05:30:16.387Z,1516685416.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:16.787Z,1516685416.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T05:30:16.788Z,1516685416.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:17.186Z,1516685417.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T05:30:17.187Z,1516685417.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:17.586Z,1516685417.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T05:30:17.587Z,1516685417.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:17.988Z,1516685417.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:30:17.989Z,1516685417.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:18.382Z,1516685418.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T05:30:18.383Z,1516685418.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:18.796Z,1516685418.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T05:30:18.797Z,1516685418.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:19.200Z,1516685419.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T05:30:19.201Z,1516685419.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:19.593Z,1516685419.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T05:30:19.594Z,1516685419.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:19.984Z,1516685419.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T05:30:19.985Z,1516685419.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:20.396Z,1516685420.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T05:30:20.397Z,1516685420.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:20.792Z,1516685420.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T05:30:20.792Z,1516685420.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:21.195Z,1516685421.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T05:30:21.196Z,1516685421.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:21.596Z,1516685421.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T05:30:21.597Z,1516685421.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:21.982Z,1516685421.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T05:30:21.983Z,1516685421.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:22.388Z,1516685422.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T05:30:22.389Z,1516685422.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:22.807Z,1516685422.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T05:30:22.808Z,1516685422.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:23.198Z,1516685423.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:30:23.200Z,1516685423.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:23.602Z,1516685423.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T05:30:23.607Z,1516685423.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:23.995Z,1516685423.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:24.401Z,1516685424.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:24.811Z,1516685424.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:25.205Z,1516685425.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:25.602Z,1516685425.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:26.019Z,1516685426.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:26.382Z,1516685426.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:26.814Z,1516685426.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:27.226Z,1516685427.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:27.589Z,1516685427.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:27.984Z,1516685427.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:28.419Z,1516685428.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:28.801Z,1516685428.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:29.201Z,1516685429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:29.613Z,1516685429.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:29.998Z,1516685429.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:30.414Z,1516685430.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:30.830Z,1516685430.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:31.216Z,1516685431.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:31.621Z,1516685431.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:31.997Z,1516685431.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:32.391Z,1516685432.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:32.800Z,1516685432.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:33.209Z,1516685433.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:33.661Z,1516685433.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:33.996Z,1516685433.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:34.405Z,1516685434.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:34.789Z,1516685434.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:35.200Z,1516685435.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:35.598Z,1516685435.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:35.990Z,1516685435.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:36.385Z,1516685436.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:36.792Z,1516685436.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:37.185Z,1516685437.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:37.591Z,1516685437.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:37.998Z,1516685437.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:38.405Z,1516685438.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:38.803Z,1516685438.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:39.204Z,1516685439.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:39.576Z,1516685439.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:39.984Z,1516685439.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:40.385Z,1516685440.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:40.783Z,1516685440.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:41.185Z,1516685441.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:41.582Z,1516685441.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:41.979Z,1516685441.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:42.379Z,1516685442.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:42.779Z,1516685442.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:43.183Z,1516685443.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:43.585Z,1516685443.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:43.982Z,1516685443.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:44.379Z,1516685444.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:44.778Z,1516685444.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:45.181Z,1516685445.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:45.579Z,1516685445.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:45.982Z,1516685445.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:46.387Z,1516685446.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:46.783Z,1516685446.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:47.178Z,1516685447.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:47.579Z,1516685447.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:47.979Z,1516685447.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:48.379Z,1516685448.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:48.779Z,1516685448.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:49.183Z,1516685449.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:49.586Z,1516685449.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:49.982Z,1516685449.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:50.384Z,1516685450.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:50.778Z,1516685450.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:51.185Z,1516685451.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:51.585Z,1516685451.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:51.982Z,1516685451.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:52.406Z,1516685452.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:52.783Z,1516685452.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:53.185Z,1516685453.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:53.581Z,1516685453.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:53.982Z,1516685453.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:54.381Z,1516685454.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:54.788Z,1516685454.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:55.191Z,1516685455.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:55.594Z,1516685455.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:55.995Z,1516685455.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:56.386Z,1516685456.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:56.781Z,1516685456.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:57.184Z,1516685457.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:57.592Z,1516685457.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:57.993Z,1516685457.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:58.394Z,1516685458.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:58.794Z,1516685458.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:59.181Z,1516685459.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:59.591Z,1516685459.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:30:59.985Z,1516685459.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:00.381Z,1516685460.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:00.792Z,1516685460.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:01.201Z,1516685461.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:04.288Z,1516685464.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:04.445Z,1516685464.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:04.752Z,1516685464.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:05.171Z,1516685465.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:05.548Z,1516685465.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:05.955Z,1516685465.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:06.358Z,1516685466.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:06.765Z,1516685466.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:07.152Z,1516685467.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:07.552Z,1516685467.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:07.945Z,1516685467.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:08.344Z,1516685468.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:08.731Z,1516685468.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:08.745Z,1516685468.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:09.140Z,1516685469.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:09.155Z,1516685469.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:09.544Z,1516685469.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:09.558Z,1516685469.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:09.957Z,1516685469.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:10.345Z,1516685470.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:10.745Z,1516685470.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:11.148Z,1516685471.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:11.545Z,1516685471.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:11.958Z,1516685471.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:12.366Z,1516685472.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:12.807Z,1516685472.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:13.157Z,1516685473.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:13.551Z,1516685473.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:13.963Z,1516685473.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:14.356Z,1516685474.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:14.771Z,1516685474.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:15.164Z,1516685475.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:15.575Z,1516685475.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:15.973Z,1516685475.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:16.370Z,1516685476.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:16.773Z,1516685476.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:17.151Z,1516685477.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:17.573Z,1516685477.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:17.978Z,1516685477.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:18.379Z,1516685478.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:18.758Z,1516685478.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:19.151Z,1516685479.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:19.557Z,1516685479.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:19.948Z,1516685479.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:20.349Z,1516685480.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:20.750Z,1516685480.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:21.154Z,1516685481.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:21.562Z,1516685481.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:21.966Z,1516685481.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:22.352Z,1516685482.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:22.750Z,1516685482.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:23.152Z,1516685483.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:23.548Z,1516685483.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:23.954Z,1516685483.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:24.358Z,1516685484.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:24.754Z,1516685484.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:25.150Z,1516685485.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:25.550Z,1516685485.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:25.953Z,1516685485.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:26.356Z,1516685486.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:26.757Z,1516685486.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:27.162Z,1516685487.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:27.561Z,1516685487.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:27.961Z,1516685487.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:28.351Z,1516685488.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:28.754Z,1516685488.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:29.156Z,1516685489.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:29.561Z,1516685489.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:29.961Z,1516685489.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:30.365Z,1516685490.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:30.773Z,1516685490.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:31.155Z,1516685491.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:31.556Z,1516685491.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:31.957Z,1516685491.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:32.354Z,1516685492.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:32.753Z,1516685492.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:33.172Z,1516685493.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:33.573Z,1516685493.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:33.966Z,1516685493.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:34.356Z,1516685494.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:34.754Z,1516685494.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:35.153Z,1516685495.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:35.561Z,1516685495.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:35.996Z,1516685495.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:36.366Z,1516685496.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:36.762Z,1516685496.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:37.157Z,1516685497.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:37.562Z,1516685497.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:37.954Z,1516685497.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:38.355Z,1516685498.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:38.753Z,1516685498.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:39.162Z,1516685499.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:39.565Z,1516685499.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:39.963Z,1516685499.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:40.354Z,1516685500.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:40.753Z,1516685500.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:41.162Z,1516685501.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:41.556Z,1516685501.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:41.962Z,1516685501.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:42.365Z,1516685502.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:42.762Z,1516685502.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:43.160Z,1516685503.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:43.557Z,1516685503.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:43.956Z,1516685503.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:44.363Z,1516685504.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:44.752Z,1516685504.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:45.162Z,1516685505.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:45.565Z,1516685505.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:45.968Z,1516685505.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:46.362Z,1516685506.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:46.755Z,1516685506.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:47.139Z,1516685507.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:47.157Z,1516685507.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:47.541Z,1516685507.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:47.555Z,1516685507.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:47.947Z,1516685507.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:31:47.962Z,1516685507.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:48.365Z,1516685508.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:48.761Z,1516685508.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:49.154Z,1516685509.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:49.552Z,1516685509.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:49.961Z,1516685509.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:50.365Z,1516685510.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:50.762Z,1516685510.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:51.153Z,1516685511.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:51.562Z,1516685511.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:51.965Z,1516685511.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:52.372Z,1516685512.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:52.761Z,1516685512.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:53.157Z,1516685513.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:53.561Z,1516685513.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:53.961Z,1516685513.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:54.372Z,1516685514.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:54.761Z,1516685514.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:55.154Z,1516685515.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:55.554Z,1516685515.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:55.961Z,1516685515.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:56.365Z,1516685516.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:56.762Z,1516685516.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:57.156Z,1516685517.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:57.552Z,1516685517.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:57.973Z,1516685517.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:58.373Z,1516685518.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:58.763Z,1516685518.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:59.161Z,1516685519.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:59.559Z,1516685519.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:59.962Z,1516685519.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:31:59.965Z,1516685519.965 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:31:59.965Z,1516685519.965 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:31:59.965Z,1516685519.965 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:31:59.965Z,1516685519.965 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:32:00.370Z,1516685520.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:00.373Z,1516685520.373 [Default:CheckIn:D] Stopped 2018-01-23T05:32:00.373Z,1516685520.373 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:32:00.762Z,1516685520.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.138550 min 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn:E] Stopped 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn] Stopped 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn](INFO): Running loop #14 2018-01-23T05:32:00.766Z,1516685520.766 [Default:CheckIn] Running Loop=14 2018-01-23T05:32:00.767Z,1516685520.767 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:32:00.767Z,1516685520.767 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:32:01.160Z,1516685521.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:01.561Z,1516685521.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:04.661Z,1516685524.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:04.825Z,1516685524.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:05.158Z,1516685525.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:05.527Z,1516685525.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:05.926Z,1516685525.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:06.328Z,1516685526.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:06.734Z,1516685526.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:07.130Z,1516685527.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:07.558Z,1516685527.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:07.961Z,1516685527.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:08.330Z,1516685528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:08.729Z,1516685528.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:09.128Z,1516685529.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:09.529Z,1516685529.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:09.931Z,1516685529.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:10.334Z,1516685530.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:10.731Z,1516685530.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:11.137Z,1516685531.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:11.532Z,1516685531.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:11.935Z,1516685531.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:12.340Z,1516685532.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:12.735Z,1516685532.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:13.127Z,1516685533.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:13.537Z,1516685533.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:13.932Z,1516685533.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:14.338Z,1516685534.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:14.742Z,1516685534.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:15.139Z,1516685535.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:15.529Z,1516685535.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:15.929Z,1516685535.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:16.332Z,1516685536.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:16.733Z,1516685536.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:17.142Z,1516685537.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:17.543Z,1516685537.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:17.945Z,1516685537.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:18.341Z,1516685538.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:18.731Z,1516685538.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:19.130Z,1516685539.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:19.537Z,1516685539.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:19.938Z,1516685539.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:20.343Z,1516685540.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:20.742Z,1516685540.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:21.146Z,1516685541.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:21.533Z,1516685541.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:21.933Z,1516685541.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:22.333Z,1516685542.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:22.730Z,1516685542.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:23.149Z,1516685543.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:23.546Z,1516685543.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:23.942Z,1516685543.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:24.337Z,1516685544.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:24.744Z,1516685544.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:25.135Z,1516685545.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:25.535Z,1516685545.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:25.937Z,1516685545.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:26.345Z,1516685546.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:26.748Z,1516685546.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:27.152Z,1516685547.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:27.533Z,1516685547.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:27.939Z,1516685547.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:28.306Z,1516685548.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:28.339Z,1516685548.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:28.703Z,1516685548.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:28.730Z,1516685548.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:29.128Z,1516685549.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:29.143Z,1516685549.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:29.539Z,1516685549.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:29.561Z,1516685549.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:29.928Z,1516685549.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:29.942Z,1516685549.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:30.305Z,1516685550.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:30.337Z,1516685550.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:30.712Z,1516685550.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:30.738Z,1516685550.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:31.108Z,1516685551.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:31.134Z,1516685551.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:31.514Z,1516685551.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:31.544Z,1516685551.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:31.905Z,1516685551.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:31.945Z,1516685551.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:32.320Z,1516685552.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:32.346Z,1516685552.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:32.720Z,1516685552.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:32.745Z,1516685552.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:33.141Z,1516685553.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:33.161Z,1516685553.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:33.509Z,1516685553.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:33.545Z,1516685553.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:33.916Z,1516685553.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:33.930Z,1516685553.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:34.315Z,1516685554.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:34.330Z,1516685554.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:34.710Z,1516685554.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:34.729Z,1516685554.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:35.128Z,1516685555.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:35.158Z,1516685555.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:35.528Z,1516685555.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:35.542Z,1516685555.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:35.928Z,1516685555.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:35.942Z,1516685555.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:36.318Z,1516685556.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:36.333Z,1516685556.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:36.717Z,1516685556.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:36.739Z,1516685556.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:37.105Z,1516685557.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:37.140Z,1516685557.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:37.521Z,1516685557.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:37.535Z,1516685557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:37.912Z,1516685557.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:37.944Z,1516685557.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:38.330Z,1516685558.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:38.345Z,1516685558.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:38.730Z,1516685558.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:38.745Z,1516685558.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:39.120Z,1516685559.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:39.147Z,1516685559.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:39.507Z,1516685559.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:39.538Z,1516685559.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:39.913Z,1516685559.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:39.938Z,1516685559.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:40.308Z,1516685560.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:40.336Z,1516685560.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:40.707Z,1516685560.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:40.741Z,1516685560.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:41.128Z,1516685561.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:41.142Z,1516685561.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:41.541Z,1516685561.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:41.555Z,1516685561.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:41.918Z,1516685561.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:41.953Z,1516685561.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:42.314Z,1516685562.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:42.344Z,1516685562.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:42.715Z,1516685562.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:42.729Z,1516685562.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:43.117Z,1516685563.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:43.153Z,1516685563.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:43.517Z,1516685563.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:43.532Z,1516685563.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:43.916Z,1516685563.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:43.930Z,1516685563.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:44.317Z,1516685564.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:44.336Z,1516685564.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:44.732Z,1516685564.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:44.753Z,1516685564.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:45.118Z,1516685565.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:45.134Z,1516685565.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:45.514Z,1516685565.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:45.536Z,1516685565.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:45.921Z,1516685565.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:45.935Z,1516685565.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:46.318Z,1516685566.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:46.332Z,1516685566.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:46.724Z,1516685566.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:46.739Z,1516685566.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:47.126Z,1516685567.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:47.145Z,1516685567.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:47.525Z,1516685567.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:47.553Z,1516685567.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:47.928Z,1516685567.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:47.942Z,1516685567.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:48.316Z,1516685568.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:48.365Z,1516685568.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:48.714Z,1516685568.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:48.730Z,1516685568.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x41525 got:0x49716 2018-01-23T05:32:48.758Z,1516685568.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:49.116Z,1516685569.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:49.145Z,1516685569.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:49.522Z,1516685569.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:49.536Z,1516685569.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:49.905Z,1516685569.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:49.937Z,1516685569.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:50.329Z,1516685570.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:50.336Z,1516685570.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T05:32:50.353Z,1516685570.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:50.731Z,1516685570.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:50.745Z,1516685570.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:51.124Z,1516685571.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:51.152Z,1516685571.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:51.510Z,1516685571.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:51.540Z,1516685571.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:51.906Z,1516685571.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:51.950Z,1516685571.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:52.323Z,1516685572.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:52.337Z,1516685572.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:52.707Z,1516685572.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:52.746Z,1516685572.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:53.126Z,1516685573.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:53.143Z,1516685573.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:53.533Z,1516685573.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:53.547Z,1516685573.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:53.921Z,1516685573.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:53.953Z,1516685573.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:54.311Z,1516685574.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:54.337Z,1516685574.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:54.705Z,1516685574.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:54.740Z,1516685574.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:55.105Z,1516685575.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:55.141Z,1516685575.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:55.506Z,1516685575.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:55.541Z,1516685575.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:55.908Z,1516685575.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:55.922Z,1516685575.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:56.316Z,1516685576.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:56.349Z,1516685576.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:56.720Z,1516685576.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:56.757Z,1516685576.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:57.126Z,1516685577.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:57.153Z,1516685577.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:57.515Z,1516685577.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:57.530Z,1516685577.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:57.917Z,1516685577.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:57.957Z,1516685577.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:58.318Z,1516685578.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:58.360Z,1516685578.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:58.714Z,1516685578.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:58.731Z,1516685578.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:59.129Z,1516685579.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:59.157Z,1516685579.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:59.524Z,1516685579.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:59.554Z,1516685579.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:32:59.921Z,1516685579.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:32:59.955Z,1516685579.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:00.312Z,1516685580.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:00.334Z,1516685580.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:00.716Z,1516685580.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:00.730Z,1516685580.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:01.112Z,1516685581.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:01.158Z,1516685581.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:01.512Z,1516685581.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:01.528Z,1516685581.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:01.914Z,1516685581.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:01.934Z,1516685581.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:05.032Z,1516685585.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:05.062Z,1516685585.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:05.062Z,1516685585.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-01-23T05:33:05.062Z,1516685585.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:33:05.064Z,1516685585.064 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:05.064Z,1516685585.064 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-01-23T05:33:05.064Z,1516685585.064 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:33:05.066Z,1516685585.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:05.066Z,1516685585.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46 2018-01-23T05:33:05.066Z,1516685585.066 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:33:05.078Z,1516685585.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:33:05.079Z,1516685585.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:33:05.079Z,1516685585.079 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:33:05.186Z,1516685585.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:05.237Z,1516685585.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:33:05.237Z,1516685585.237 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-01-23T05:33:05.237Z,1516685585.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:33:05.238Z,1516685585.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-01-23T05:33:05.238Z,1516685585.238 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:33:05.238Z,1516685585.238 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46 2018-01-23T05:33:05.540Z,1516685585.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:05.573Z,1516685585.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:33:05.574Z,1516685585.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:33:05.574Z,1516685585.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:33:05.574Z,1516685585.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:33:05.575Z,1516685585.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:33:05.575Z,1516685585.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:33:05.576Z,1516685585.576 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:33:05.576Z,1516685585.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:33:05.576Z,1516685585.576 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:33:05.926Z,1516685585.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:05.966Z,1516685585.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T05:33:05.968Z,1516685585.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:06.316Z,1516685586.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:06.336Z,1516685586.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T05:33:06.337Z,1516685586.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:06.718Z,1516685586.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:06.736Z,1516685586.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T05:33:06.737Z,1516685586.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:07.133Z,1516685587.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:07.152Z,1516685587.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T05:33:07.153Z,1516685587.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:07.529Z,1516685587.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:07.573Z,1516685587.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T05:33:07.574Z,1516685587.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:07.929Z,1516685587.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:07.946Z,1516685587.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T05:33:07.948Z,1516685587.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:08.316Z,1516685588.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:08.338Z,1516685588.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T05:33:08.340Z,1516685588.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:08.712Z,1516685588.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:08.746Z,1516685588.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T05:33:08.748Z,1516685588.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:09.116Z,1516685589.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:09.141Z,1516685589.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T05:33:09.141Z,1516685589.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:09.522Z,1516685589.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:09.536Z,1516685589.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T05:33:09.537Z,1516685589.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:09.912Z,1516685589.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:09.936Z,1516685589.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T05:33:09.938Z,1516685589.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:10.331Z,1516685590.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:10.345Z,1516685590.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T05:33:10.346Z,1516685590.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:10.744Z,1516685590.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:10.780Z,1516685590.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T05:33:10.781Z,1516685590.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:11.124Z,1516685591.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:11.138Z,1516685591.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T05:33:11.139Z,1516685591.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:11.511Z,1516685591.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:11.524Z,1516685591.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T05:33:11.525Z,1516685591.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:11.946Z,1516685591.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:11.964Z,1516685591.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T05:33:11.965Z,1516685591.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:12.317Z,1516685592.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:12.352Z,1516685592.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T05:33:12.353Z,1516685592.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:12.714Z,1516685592.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:12.757Z,1516685592.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T05:33:12.758Z,1516685592.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:13.128Z,1516685593.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:13.155Z,1516685593.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T05:33:13.156Z,1516685593.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:13.545Z,1516685593.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:13.559Z,1516685593.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T05:33:13.560Z,1516685593.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:13.928Z,1516685593.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:13.964Z,1516685593.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T05:33:13.966Z,1516685593.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:14.317Z,1516685594.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:14.353Z,1516685594.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T05:33:14.354Z,1516685594.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:14.721Z,1516685594.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:14.754Z,1516685594.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T05:33:14.755Z,1516685594.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:15.154Z,1516685595.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T05:33:15.155Z,1516685595.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:15.548Z,1516685595.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T05:33:15.549Z,1516685595.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:15.931Z,1516685595.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T05:33:15.932Z,1516685595.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:16.328Z,1516685596.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:16.367Z,1516685596.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T05:33:16.368Z,1516685596.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:16.728Z,1516685596.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:16.759Z,1516685596.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T05:33:16.760Z,1516685596.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:17.158Z,1516685597.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:33:17.221Z,1516685597.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s. 2018-01-23T05:33:17.222Z,1516685597.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:17.536Z,1516685597.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T05:33:17.537Z,1516685597.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:17.932Z,1516685597.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T05:33:17.933Z,1516685597.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:18.330Z,1516685598.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T05:33:18.331Z,1516685598.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:18.736Z,1516685598.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T05:33:18.737Z,1516685598.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:19.134Z,1516685599.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:33:19.135Z,1516685599.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:19.537Z,1516685599.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T05:33:19.538Z,1516685599.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:19.937Z,1516685599.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T05:33:19.939Z,1516685599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:20.336Z,1516685600.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T05:33:20.337Z,1516685600.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:20.734Z,1516685600.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T05:33:20.736Z,1516685600.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:21.131Z,1516685601.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T05:33:21.132Z,1516685601.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:21.533Z,1516685601.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T05:33:21.533Z,1516685601.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:21.930Z,1516685601.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T05:33:21.931Z,1516685601.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:22.337Z,1516685602.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T05:33:22.338Z,1516685602.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:22.738Z,1516685602.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T05:33:22.739Z,1516685602.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:23.140Z,1516685603.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T05:33:23.142Z,1516685603.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:23.535Z,1516685603.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T05:33:23.536Z,1516685603.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:23.931Z,1516685603.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T05:33:23.932Z,1516685603.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:24.340Z,1516685604.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:33:24.341Z,1516685604.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:24.737Z,1516685604.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T05:33:24.737Z,1516685604.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:25.138Z,1516685605.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:25.538Z,1516685605.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:25.938Z,1516685605.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:26.331Z,1516685606.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:26.740Z,1516685606.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:27.134Z,1516685607.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:27.541Z,1516685607.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:27.937Z,1516685607.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:28.342Z,1516685608.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:28.741Z,1516685608.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:29.142Z,1516685609.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:29.533Z,1516685609.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:29.933Z,1516685609.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:30.349Z,1516685610.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:30.733Z,1516685610.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:31.142Z,1516685611.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:31.547Z,1516685611.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:31.938Z,1516685611.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:32.333Z,1516685612.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:32.729Z,1516685612.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:33.140Z,1516685613.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:33.533Z,1516685613.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:33.931Z,1516685613.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:34.338Z,1516685614.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:34.738Z,1516685614.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:35.134Z,1516685615.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:35.531Z,1516685615.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:35.932Z,1516685615.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:36.336Z,1516685616.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:36.732Z,1516685616.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:37.141Z,1516685617.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:37.542Z,1516685617.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:37.941Z,1516685617.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:38.332Z,1516685618.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:38.740Z,1516685618.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:39.132Z,1516685619.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:39.534Z,1516685619.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:39.942Z,1516685619.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:40.344Z,1516685620.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:40.742Z,1516685620.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:41.142Z,1516685621.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:41.540Z,1516685621.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:41.934Z,1516685621.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:42.345Z,1516685622.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:42.734Z,1516685622.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:43.153Z,1516685623.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:43.554Z,1516685623.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:43.951Z,1516685623.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:44.333Z,1516685624.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:44.739Z,1516685624.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:45.144Z,1516685625.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:45.536Z,1516685625.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:45.943Z,1516685625.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:46.357Z,1516685626.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:46.751Z,1516685626.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:47.151Z,1516685627.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:47.544Z,1516685627.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:47.944Z,1516685627.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:48.343Z,1516685628.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:48.744Z,1516685628.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:49.152Z,1516685629.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:49.548Z,1516685629.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:49.943Z,1516685629.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:50.336Z,1516685630.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:50.745Z,1516685630.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:51.154Z,1516685631.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:51.557Z,1516685631.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:51.946Z,1516685631.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:52.332Z,1516685632.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:52.733Z,1516685632.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:53.154Z,1516685633.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:53.553Z,1516685633.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:53.938Z,1516685633.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:54.333Z,1516685634.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:54.730Z,1516685634.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:55.134Z,1516685635.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:55.562Z,1516685635.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:55.961Z,1516685635.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:56.329Z,1516685636.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:56.730Z,1516685636.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:57.137Z,1516685637.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:57.562Z,1516685637.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:57.938Z,1516685637.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:58.332Z,1516685638.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:58.729Z,1516685638.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:59.138Z,1516685639.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:59.541Z,1516685639.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:33:59.946Z,1516685639.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:00.335Z,1516685640.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:00.731Z,1516685640.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:01.141Z,1516685641.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:01.542Z,1516685641.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:01.938Z,1516685641.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:05.022Z,1516685645.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:05.173Z,1516685645.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:05.495Z,1516685645.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:05.923Z,1516685645.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:06.291Z,1516685646.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:06.693Z,1516685646.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:07.088Z,1516685647.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:07.488Z,1516685647.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:07.890Z,1516685647.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:08.298Z,1516685648.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:08.701Z,1516685648.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:09.098Z,1516685649.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:09.489Z,1516685649.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:09.888Z,1516685649.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:10.289Z,1516685650.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:10.696Z,1516685650.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:11.087Z,1516685651.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:11.505Z,1516685651.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:11.901Z,1516685651.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:12.309Z,1516685652.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:12.698Z,1516685652.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:13.089Z,1516685653.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:13.491Z,1516685653.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:13.899Z,1516685653.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:14.299Z,1516685654.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:14.698Z,1516685654.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:15.107Z,1516685655.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:15.132Z,1516685655.132 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:34:15.491Z,1516685655.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:15.895Z,1516685655.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:16.296Z,1516685656.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:16.691Z,1516685656.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:17.096Z,1516685657.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:17.497Z,1516685657.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:17.902Z,1516685657.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:18.302Z,1516685658.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:18.697Z,1516685658.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:19.089Z,1516685659.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:19.495Z,1516685659.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:19.895Z,1516685659.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:20.301Z,1516685660.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:20.708Z,1516685660.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:21.113Z,1516685661.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:21.491Z,1516685661.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:21.896Z,1516685661.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:22.293Z,1516685662.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:22.696Z,1516685662.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:23.085Z,1516685663.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:23.498Z,1516685663.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:23.902Z,1516685663.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:24.301Z,1516685664.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:24.701Z,1516685664.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:25.096Z,1516685665.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:25.499Z,1516685665.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:25.897Z,1516685665.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:26.304Z,1516685666.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:26.707Z,1516685666.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:27.107Z,1516685667.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:27.500Z,1516685667.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:27.899Z,1516685667.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:28.295Z,1516685668.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:28.680Z,1516685668.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:29.077Z,1516685669.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:29.506Z,1516685669.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:29.912Z,1516685669.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:30.290Z,1516685670.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:30.689Z,1516685670.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:31.083Z,1516685671.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:31.487Z,1516685671.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:31.886Z,1516685671.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:32.294Z,1516685672.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:32.697Z,1516685672.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:33.102Z,1516685673.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:33.488Z,1516685673.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:33.886Z,1516685673.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:34.286Z,1516685674.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:34.689Z,1516685674.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:35.086Z,1516685675.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:35.497Z,1516685675.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:35.897Z,1516685675.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:36.297Z,1516685676.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:36.687Z,1516685676.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:37.087Z,1516685677.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:37.489Z,1516685677.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:37.886Z,1516685677.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:38.300Z,1516685678.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:38.701Z,1516685678.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:39.094Z,1516685679.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:39.488Z,1516685679.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:39.892Z,1516685679.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:40.289Z,1516685680.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:40.689Z,1516685680.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:41.088Z,1516685681.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:41.501Z,1516685681.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:41.897Z,1516685681.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:42.295Z,1516685682.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:42.690Z,1516685682.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:43.089Z,1516685683.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:43.494Z,1516685683.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:43.889Z,1516685683.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:44.295Z,1516685684.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:44.705Z,1516685684.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:45.101Z,1516685685.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:45.490Z,1516685685.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:45.890Z,1516685685.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:46.291Z,1516685686.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:46.699Z,1516685686.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:47.088Z,1516685687.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:47.498Z,1516685687.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:47.901Z,1516685687.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:48.305Z,1516685688.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:48.697Z,1516685688.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:49.097Z,1516685689.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:49.490Z,1516685689.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:49.889Z,1516685689.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:50.299Z,1516685690.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:50.697Z,1516685690.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:51.109Z,1516685691.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:51.491Z,1516685691.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:51.893Z,1516685691.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:52.296Z,1516685692.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:52.694Z,1516685692.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:53.093Z,1516685693.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:53.503Z,1516685693.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:53.903Z,1516685693.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:54.309Z,1516685694.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:54.689Z,1516685694.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:55.097Z,1516685695.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:55.494Z,1516685695.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:55.896Z,1516685695.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:56.305Z,1516685696.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:56.709Z,1516685696.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:57.098Z,1516685697.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:57.496Z,1516685697.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:57.889Z,1516685697.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:58.295Z,1516685698.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:58.699Z,1516685698.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:59.089Z,1516685699.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:59.498Z,1516685699.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:34:59.902Z,1516685699.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:00.309Z,1516685700.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:00.697Z,1516685700.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:01.098Z,1516685701.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:01.494Z,1516685701.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:01.895Z,1516685701.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:02.303Z,1516685702.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:05.408Z,1516685705.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:05.565Z,1516685705.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:05.869Z,1516685705.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:06.270Z,1516685706.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:06.673Z,1516685706.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:07.069Z,1516685707.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:07.478Z,1516685707.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:07.902Z,1516685707.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:08.278Z,1516685708.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:08.672Z,1516685708.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:09.069Z,1516685709.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:09.471Z,1516685709.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:09.853Z,1516685709.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:09.879Z,1516685709.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:10.259Z,1516685710.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:10.275Z,1516685710.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:10.667Z,1516685710.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:10.682Z,1516685710.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:11.059Z,1516685711.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:11.074Z,1516685711.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:11.458Z,1516685711.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:11.473Z,1516685711.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:11.856Z,1516685711.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:11.877Z,1516685711.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:12.257Z,1516685712.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:12.272Z,1516685712.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:12.654Z,1516685712.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:12.681Z,1516685712.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:13.060Z,1516685713.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:13.075Z,1516685713.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:13.462Z,1516685713.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:13.484Z,1516685713.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:13.862Z,1516685713.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:13.881Z,1516685713.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:14.264Z,1516685714.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:14.278Z,1516685714.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:14.657Z,1516685714.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:14.672Z,1516685714.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:15.052Z,1516685715.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:15.072Z,1516685715.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:15.453Z,1516685715.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:15.474Z,1516685715.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:15.857Z,1516685715.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:15.872Z,1516685715.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:16.262Z,1516685716.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:16.278Z,1516685716.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:16.663Z,1516685716.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:16.678Z,1516685716.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:17.063Z,1516685717.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:17.077Z,1516685717.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:17.456Z,1516685717.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:17.483Z,1516685717.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:17.861Z,1516685717.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:17.876Z,1516685717.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:18.267Z,1516685718.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:18.282Z,1516685718.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:18.665Z,1516685718.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:18.693Z,1516685718.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:19.067Z,1516685719.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:19.082Z,1516685719.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:19.458Z,1516685719.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:19.473Z,1516685719.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:19.856Z,1516685719.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:19.877Z,1516685719.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:20.271Z,1516685720.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:20.286Z,1516685720.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:20.671Z,1516685720.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:20.686Z,1516685720.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:21.064Z,1516685721.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:21.087Z,1516685721.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:21.450Z,1516685721.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:21.481Z,1516685721.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:21.853Z,1516685721.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:21.886Z,1516685721.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:22.260Z,1516685722.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:22.292Z,1516685722.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:22.664Z,1516685722.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:22.690Z,1516685722.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:23.059Z,1516685723.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:23.098Z,1516685723.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:23.450Z,1516685723.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:23.465Z,1516685723.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:23.854Z,1516685723.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:23.904Z,1516685723.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:24.311Z,1516685724.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:24.326Z,1516685724.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:24.673Z,1516685724.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:24.721Z,1516685724.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:25.073Z,1516685725.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:25.097Z,1516685725.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:25.497Z,1516685725.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:25.883Z,1516685725.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:26.305Z,1516685726.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:26.713Z,1516685726.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:27.094Z,1516685727.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:27.490Z,1516685727.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:27.898Z,1516685727.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:28.325Z,1516685728.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:28.716Z,1516685728.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:29.118Z,1516685729.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:29.513Z,1516685729.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:29.882Z,1516685729.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:30.341Z,1516685730.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:30.697Z,1516685730.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:31.097Z,1516685731.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:31.489Z,1516685731.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:31.929Z,1516685731.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:32.293Z,1516685732.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:32.693Z,1516685732.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:33.084Z,1516685733.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:33.489Z,1516685733.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:33.906Z,1516685733.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:34.284Z,1516685734.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:34.695Z,1516685734.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:35.086Z,1516685735.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:35.464Z,1516685735.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:35.869Z,1516685735.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:36.267Z,1516685736.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:36.293Z,1516685736.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:36.663Z,1516685736.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:36.694Z,1516685736.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:37.067Z,1516685737.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:37.098Z,1516685737.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:37.458Z,1516685737.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:37.472Z,1516685737.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:37.853Z,1516685737.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:37.868Z,1516685737.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:38.263Z,1516685738.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:38.278Z,1516685738.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:38.671Z,1516685738.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:38.704Z,1516685738.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:39.060Z,1516685739.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:39.074Z,1516685739.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:39.462Z,1516685739.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:39.477Z,1516685739.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:39.872Z,1516685739.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:40.274Z,1516685740.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:40.678Z,1516685740.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:41.085Z,1516685741.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:41.473Z,1516685741.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:41.871Z,1516685741.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:42.284Z,1516685742.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:42.681Z,1516685742.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:43.081Z,1516685743.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:43.476Z,1516685743.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:43.870Z,1516685743.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:44.280Z,1516685744.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:44.683Z,1516685744.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:45.081Z,1516685745.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:45.481Z,1516685745.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:45.876Z,1516685745.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:46.277Z,1516685746.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:46.678Z,1516685746.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:47.077Z,1516685747.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:47.481Z,1516685747.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:47.871Z,1516685747.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:48.278Z,1516685748.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:48.681Z,1516685748.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:49.081Z,1516685749.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:49.481Z,1516685749.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:49.870Z,1516685749.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:50.281Z,1516685750.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:50.678Z,1516685750.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:51.081Z,1516685751.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:51.477Z,1516685751.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:51.872Z,1516685751.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:52.364Z,1516685752.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:52.682Z,1516685752.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:53.078Z,1516685753.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:53.481Z,1516685753.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:53.871Z,1516685753.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:54.277Z,1516685754.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:54.678Z,1516685754.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:55.081Z,1516685755.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:55.457Z,1516685755.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:55.472Z,1516685755.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:55.852Z,1516685755.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:55.885Z,1516685755.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:56.261Z,1516685756.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:35:56.277Z,1516685756.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:56.683Z,1516685756.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:57.085Z,1516685757.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:57.489Z,1516685757.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:57.881Z,1516685757.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:58.272Z,1516685758.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:58.683Z,1516685758.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:59.080Z,1516685759.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:59.482Z,1516685759.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:35:59.882Z,1516685759.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:00.282Z,1516685760.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:00.680Z,1516685760.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:01.080Z,1516685761.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:01.474Z,1516685761.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:01.880Z,1516685761.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:02.281Z,1516685762.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:02.692Z,1516685762.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:05.772Z,1516685765.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:05.772Z,1516685765.772 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-01-23T05:36:05.772Z,1516685765.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:36:05.774Z,1516685765.774 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:05.774Z,1516685765.774 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-01-23T05:36:05.774Z,1516685765.774 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:36:05.776Z,1516685765.776 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:05.776Z,1516685765.776 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47 2018-01-23T05:36:05.776Z,1516685765.776 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:36:05.788Z,1516685765.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:36:05.788Z,1516685765.788 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:36:05.789Z,1516685765.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:36:05.942Z,1516685765.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:36:05.947Z,1516685765.947 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-01-23T05:36:05.947Z,1516685765.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:36:05.947Z,1516685765.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-01-23T05:36:05.948Z,1516685765.948 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:36:05.948Z,1516685765.948 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47 2018-01-23T05:36:06.252Z,1516685766.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:36:06.252Z,1516685766.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:36:06.253Z,1516685766.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:36:06.253Z,1516685766.253 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:36:06.253Z,1516685766.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:36:06.254Z,1516685766.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:36:06.254Z,1516685766.254 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:36:06.254Z,1516685766.254 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:36:06.255Z,1516685766.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:36:06.649Z,1516685766.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T05:36:06.650Z,1516685766.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:07.060Z,1516685767.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T05:36:07.061Z,1516685767.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:07.449Z,1516685767.449 [PNI_TCM](ERROR): CRC does not match. Expected:0x6950 got:0x7106 2018-01-23T05:36:07.488Z,1516685767.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T05:36:07.489Z,1516685767.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:07.860Z,1516685767.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T05:36:07.861Z,1516685767.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:08.250Z,1516685768.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T05:36:08.251Z,1516685768.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:08.660Z,1516685768.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T05:36:08.661Z,1516685768.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:09.040Z,1516685769.040 [PNI_TCM](ERROR): CRC does not match. Expected:0x54643 got:0x49716 2018-01-23T05:36:09.056Z,1516685769.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T05:36:09.057Z,1516685769.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:09.443Z,1516685769.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T05:36:09.444Z,1516685769.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:09.843Z,1516685769.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T05:36:09.844Z,1516685769.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:10.252Z,1516685770.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T05:36:10.253Z,1516685770.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:10.644Z,1516685770.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x15401 got:0x7106 2018-01-23T05:36:10.684Z,1516685770.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T05:36:10.685Z,1516685770.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:11.054Z,1516685771.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T05:36:11.059Z,1516685771.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:11.453Z,1516685771.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T05:36:11.453Z,1516685771.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:11.856Z,1516685771.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T05:36:11.857Z,1516685771.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:12.252Z,1516685772.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T05:36:12.253Z,1516685772.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:12.644Z,1516685772.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T05:36:12.645Z,1516685772.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:13.042Z,1516685773.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T05:36:13.043Z,1516685773.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:13.477Z,1516685773.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T05:36:13.478Z,1516685773.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:13.849Z,1516685773.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x33744 got:0x51584 2018-01-23T05:36:13.884Z,1516685773.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T05:36:13.885Z,1516685773.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:14.253Z,1516685774.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T05:36:14.254Z,1516685774.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:14.654Z,1516685774.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T05:36:14.655Z,1516685774.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:15.060Z,1516685775.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T05:36:15.061Z,1516685775.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:15.460Z,1516685775.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T05:36:15.461Z,1516685775.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:15.861Z,1516685775.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x19099 got:0x7106 2018-01-23T05:36:15.888Z,1516685775.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T05:36:15.889Z,1516685775.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:16.241Z,1516685776.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T05:36:16.242Z,1516685776.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:16.663Z,1516685776.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T05:36:16.664Z,1516685776.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:17.081Z,1516685777.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T05:36:17.082Z,1516685777.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:17.473Z,1516685777.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T05:36:17.474Z,1516685777.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:17.843Z,1516685777.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T05:36:17.844Z,1516685777.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:18.256Z,1516685778.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T05:36:18.257Z,1516685778.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:18.687Z,1516685778.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T05:36:18.688Z,1516685778.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:19.056Z,1516685779.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T05:36:19.057Z,1516685779.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:19.444Z,1516685779.444 [PNI_TCM](ERROR): CRC does not match. Expected:0x3413 got:0x63088 2018-01-23T05:36:19.477Z,1516685779.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T05:36:19.478Z,1516685779.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:19.873Z,1516685779.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:36:19.874Z,1516685779.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:20.251Z,1516685780.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T05:36:20.252Z,1516685780.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:20.645Z,1516685780.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T05:36:20.646Z,1516685780.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:21.046Z,1516685781.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T05:36:21.047Z,1516685781.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:21.459Z,1516685781.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T05:36:21.460Z,1516685781.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:21.848Z,1516685781.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T05:36:21.849Z,1516685781.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:22.246Z,1516685782.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T05:36:22.247Z,1516685782.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:22.650Z,1516685782.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T05:36:22.651Z,1516685782.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:23.076Z,1516685783.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T05:36:23.077Z,1516685783.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:23.454Z,1516685783.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T05:36:23.455Z,1516685783.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:23.851Z,1516685783.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T05:36:23.852Z,1516685783.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:24.244Z,1516685784.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T05:36:24.245Z,1516685784.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:24.674Z,1516685784.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T05:36:24.675Z,1516685784.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:25.052Z,1516685785.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:36:25.053Z,1516685785.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:25.481Z,1516685785.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T05:36:25.482Z,1516685785.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:25.861Z,1516685785.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:26.279Z,1516685786.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:26.641Z,1516685786.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:27.047Z,1516685787.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:27.453Z,1516685787.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:27.844Z,1516685787.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:28.244Z,1516685788.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:28.654Z,1516685788.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:29.057Z,1516685789.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:29.472Z,1516685789.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:29.852Z,1516685789.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:30.255Z,1516685790.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:30.657Z,1516685790.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:31.055Z,1516685791.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:31.453Z,1516685791.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:31.869Z,1516685791.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:32.262Z,1516685792.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:32.661Z,1516685792.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:33.052Z,1516685793.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:33.437Z,1516685793.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:33.863Z,1516685793.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:34.241Z,1516685794.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:34.646Z,1516685794.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:35.046Z,1516685795.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:35.446Z,1516685795.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:35.845Z,1516685795.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:36.246Z,1516685796.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:36.645Z,1516685796.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:37.041Z,1516685797.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:37.400Z,1516685797.400 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:36:37.400Z,1516685797.400 [NAL9602] Data Fault, FailCount= 3 2018-01-23T05:36:37.400Z,1516685797.400 [NAL9602](ERROR): Data Fault 2018-01-23T05:36:37.449Z,1516685797.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:37.475Z,1516685797.475 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:36:37.801Z,1516685797.801 [NAL9602](INFO): Powering down 2018-01-23T05:36:37.853Z,1516685797.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:38.240Z,1516685798.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:38.647Z,1516685798.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:38.663Z,1516685798.663 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T05:36:38.663Z,1516685798.663 [NAL9602] No Fault, FailCount= 3 2018-01-23T05:36:39.039Z,1516685799.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:39.442Z,1516685799.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:39.850Z,1516685799.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:40.248Z,1516685800.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:40.650Z,1516685800.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:41.041Z,1516685801.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:41.451Z,1516685801.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:41.844Z,1516685801.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:42.240Z,1516685802.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:42.641Z,1516685802.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:43.048Z,1516685803.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:43.444Z,1516685803.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:43.846Z,1516685803.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:44.245Z,1516685804.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:44.648Z,1516685804.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:45.036Z,1516685805.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:45.443Z,1516685805.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:45.859Z,1516685805.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:46.228Z,1516685806.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:46.631Z,1516685806.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:47.040Z,1516685807.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:47.438Z,1516685807.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:47.839Z,1516685807.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:48.239Z,1516685808.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:48.637Z,1516685808.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:49.038Z,1516685809.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:49.444Z,1516685809.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:49.837Z,1516685809.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:50.239Z,1516685810.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:50.637Z,1516685810.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:51.037Z,1516685811.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:51.437Z,1516685811.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:51.837Z,1516685811.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:52.235Z,1516685812.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:52.637Z,1516685812.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:53.038Z,1516685813.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:53.444Z,1516685813.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:53.840Z,1516685813.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:54.237Z,1516685814.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:54.637Z,1516685814.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:55.039Z,1516685815.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:55.444Z,1516685815.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:55.839Z,1516685815.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:56.240Z,1516685816.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:56.646Z,1516685816.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:57.038Z,1516685817.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:57.440Z,1516685817.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:57.838Z,1516685817.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:58.238Z,1516685818.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:58.639Z,1516685818.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:59.041Z,1516685819.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:59.435Z,1516685819.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:36:59.839Z,1516685819.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:00.239Z,1516685820.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:00.636Z,1516685820.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:01.046Z,1516685821.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:01.049Z,1516685821.049 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:32:00.8Z 2018-01-23T05:37:01.050Z,1516685821.050 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:37:01.050Z,1516685821.050 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:37:01.449Z,1516685821.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:01.951Z,1516685821.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:02.261Z,1516685822.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:05.334Z,1516685825.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:05.411Z,1516685825.411 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0056.lzma 2018-01-23T05:37:05.477Z,1516685825.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:05.805Z,1516685825.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:06.158Z,1516685826.158 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0056.lzma.bak 2018-01-23T05:37:06.161Z,1516685826.161 [DataOverHttps](INFO): SBD MOMSN=7755075 2018-01-23T05:37:06.228Z,1516685826.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:06.824Z,1516685826.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:07.021Z,1516685827.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:10.059Z,1516685830.059 [NAL9602](INFO): Powering up NAL9602 2018-01-23T05:37:10.108Z,1516685830.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:10.246Z,1516685830.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:10.599Z,1516685830.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:11.004Z,1516685831.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:11.377Z,1516685831.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:11.780Z,1516685831.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:14.869Z,1516685834.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:14.948Z,1516685834.948 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0057.lzma 2018-01-23T05:37:15.015Z,1516685835.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:15.358Z,1516685835.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:15.697Z,1516685835.697 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0057.lzma.bak 2018-01-23T05:37:15.697Z,1516685835.697 [DataOverHttps](INFO): SBD MOMSN=7755077 2018-01-23T05:37:15.733Z,1516685835.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:16.376Z,1516685836.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:16.379Z,1516685836.379 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:37:16.379Z,1516685836.379 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:37:16.379Z,1516685836.379 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:37:16.568Z,1516685836.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:19.632Z,1516685839.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:19.760Z,1516685839.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:20.132Z,1516685840.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:20.538Z,1516685840.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:20.888Z,1516685840.888 [NAL9602](INFO): NAL9602 initialized 2018-01-23T05:37:20.925Z,1516685840.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:21.327Z,1516685841.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:21.733Z,1516685841.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:22.134Z,1516685842.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:22.537Z,1516685842.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:22.932Z,1516685842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:23.326Z,1516685843.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:23.737Z,1516685843.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:24.137Z,1516685844.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:24.537Z,1516685844.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:24.931Z,1516685844.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:25.330Z,1516685845.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:25.734Z,1516685845.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:26.134Z,1516685846.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:26.533Z,1516685846.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:26.929Z,1516685846.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:27.344Z,1516685847.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:27.733Z,1516685847.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:28.134Z,1516685848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:28.541Z,1516685848.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:28.933Z,1516685848.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:29.326Z,1516685849.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:29.745Z,1516685849.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:30.141Z,1516685850.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:30.537Z,1516685850.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:30.936Z,1516685850.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:31.329Z,1516685851.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:31.742Z,1516685851.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:32.150Z,1516685852.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:32.565Z,1516685852.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:32.925Z,1516685852.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:33.325Z,1516685853.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:33.734Z,1516685853.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:34.205Z,1516685854.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:34.534Z,1516685854.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:34.921Z,1516685854.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:35.324Z,1516685855.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:35.721Z,1516685855.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:36.168Z,1516685856.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:36.542Z,1516685856.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:36.945Z,1516685856.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:37.333Z,1516685857.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:37.729Z,1516685857.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:38.139Z,1516685858.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:38.533Z,1516685858.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:38.937Z,1516685858.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:39.341Z,1516685859.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:39.738Z,1516685859.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:40.130Z,1516685860.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:40.531Z,1516685860.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:40.941Z,1516685860.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:41.329Z,1516685861.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:41.741Z,1516685861.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:42.145Z,1516685862.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:42.545Z,1516685862.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:42.943Z,1516685862.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:43.346Z,1516685863.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:43.735Z,1516685863.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:44.141Z,1516685864.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:44.542Z,1516685864.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:44.953Z,1516685864.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:45.344Z,1516685865.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:45.745Z,1516685865.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:46.140Z,1516685866.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:46.540Z,1516685866.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:46.946Z,1516685866.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:47.340Z,1516685867.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:47.740Z,1516685867.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:48.155Z,1516685868.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:48.542Z,1516685868.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:48.948Z,1516685868.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:49.341Z,1516685869.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:49.739Z,1516685869.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:50.138Z,1516685870.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:50.540Z,1516685870.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:50.943Z,1516685870.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:51.342Z,1516685871.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:51.751Z,1516685871.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:52.139Z,1516685872.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:52.539Z,1516685872.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:52.941Z,1516685872.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:53.320Z,1516685873.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:53.750Z,1516685873.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:54.149Z,1516685874.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:54.553Z,1516685874.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:54.953Z,1516685874.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:55.325Z,1516685875.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:55.750Z,1516685875.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:56.128Z,1516685876.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:56.526Z,1516685876.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:56.934Z,1516685876.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:57.334Z,1516685877.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:57.736Z,1516685877.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:58.128Z,1516685878.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:58.526Z,1516685878.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:58.926Z,1516685878.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:59.332Z,1516685879.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:37:59.731Z,1516685879.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:00.140Z,1516685880.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:00.544Z,1516685880.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:00.941Z,1516685880.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:01.332Z,1516685881.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:01.737Z,1516685881.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:02.129Z,1516685882.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:02.527Z,1516685882.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:02.941Z,1516685882.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:03.341Z,1516685883.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:03.737Z,1516685883.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:04.127Z,1516685884.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:04.530Z,1516685884.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:04.929Z,1516685884.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:05.330Z,1516685885.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:05.728Z,1516685885.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:06.138Z,1516685886.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:06.545Z,1516685886.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:06.945Z,1516685886.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:07.328Z,1516685887.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:07.730Z,1516685887.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:08.138Z,1516685888.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:08.527Z,1516685888.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:08.937Z,1516685888.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:09.341Z,1516685889.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:09.738Z,1516685889.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:10.130Z,1516685890.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:10.536Z,1516685890.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:10.931Z,1516685890.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:11.329Z,1516685891.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:11.742Z,1516685891.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:12.138Z,1516685892.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:12.549Z,1516685892.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:12.941Z,1516685892.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:13.330Z,1516685893.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:13.735Z,1516685893.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:14.129Z,1516685894.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:14.538Z,1516685894.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:14.938Z,1516685894.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:15.341Z,1516685895.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:15.748Z,1516685895.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:16.137Z,1516685896.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:16.536Z,1516685896.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:16.939Z,1516685896.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:20.025Z,1516685900.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:20.144Z,1516685900.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:20.543Z,1516685900.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:20.907Z,1516685900.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:21.305Z,1516685901.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:21.706Z,1516685901.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:22.096Z,1516685902.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:22.501Z,1516685902.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:22.904Z,1516685902.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:23.312Z,1516685903.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:23.713Z,1516685903.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:24.099Z,1516685904.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:24.504Z,1516685904.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:24.901Z,1516685904.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:25.298Z,1516685905.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:25.704Z,1516685905.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:26.110Z,1516685906.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:26.510Z,1516685906.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:26.907Z,1516685906.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:27.298Z,1516685907.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:27.706Z,1516685907.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:28.101Z,1516685908.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:28.498Z,1516685908.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:28.906Z,1516685908.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:29.316Z,1516685909.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:29.717Z,1516685909.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:30.105Z,1516685910.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:30.501Z,1516685910.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:30.905Z,1516685910.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:31.309Z,1516685911.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:31.704Z,1516685911.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:32.117Z,1516685912.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:32.507Z,1516685912.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:32.916Z,1516685912.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:33.301Z,1516685913.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:33.705Z,1516685913.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:34.097Z,1516685914.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:34.504Z,1516685914.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:34.910Z,1516685914.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:35.309Z,1516685915.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:35.705Z,1516685915.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:36.099Z,1516685916.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:36.507Z,1516685916.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:36.902Z,1516685916.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:37.298Z,1516685917.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:37.698Z,1516685917.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:38.113Z,1516685918.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:38.510Z,1516685918.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:38.906Z,1516685918.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:39.299Z,1516685919.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:39.708Z,1516685919.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:40.105Z,1516685920.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:40.505Z,1516685920.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:40.916Z,1516685920.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:41.314Z,1516685921.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:41.714Z,1516685921.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:42.103Z,1516685922.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:42.509Z,1516685922.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:42.900Z,1516685922.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:43.308Z,1516685923.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:43.704Z,1516685923.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:44.117Z,1516685924.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:44.513Z,1516685924.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:44.914Z,1516685924.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:45.305Z,1516685925.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:45.709Z,1516685925.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:46.101Z,1516685926.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:46.509Z,1516685926.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:46.925Z,1516685926.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:47.314Z,1516685927.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:47.707Z,1516685927.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:48.100Z,1516685928.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:48.510Z,1516685928.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:48.913Z,1516685928.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:49.310Z,1516685929.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:49.717Z,1516685929.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:50.109Z,1516685930.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:50.505Z,1516685930.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:50.905Z,1516685930.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:51.309Z,1516685931.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:51.705Z,1516685931.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:52.124Z,1516685932.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:52.517Z,1516685932.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:52.915Z,1516685932.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:53.312Z,1516685933.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:53.713Z,1516685933.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:54.083Z,1516685934.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T05:38:54.120Z,1516685934.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:54.481Z,1516685934.481 [PNI_TCM](ERROR): CRC does not match. Expected:0x7806 got:0x16384 2018-01-23T05:38:54.517Z,1516685934.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:54.919Z,1516685934.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:55.321Z,1516685935.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:55.722Z,1516685935.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:56.096Z,1516685936.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:56.501Z,1516685936.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:56.929Z,1516685936.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:57.303Z,1516685937.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:57.727Z,1516685937.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:58.100Z,1516685938.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:58.525Z,1516685938.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:58.933Z,1516685938.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:59.305Z,1516685939.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:38:59.705Z,1516685939.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:00.123Z,1516685940.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:00.499Z,1516685940.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:00.902Z,1516685940.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:01.309Z,1516685941.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:01.729Z,1516685941.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:02.103Z,1516685942.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:02.498Z,1516685942.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:02.905Z,1516685942.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:03.325Z,1516685943.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:03.704Z,1516685943.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:04.100Z,1516685944.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:04.498Z,1516685944.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:04.937Z,1516685944.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:05.313Z,1516685945.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:05.700Z,1516685945.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x33615 got:0x6466 2018-01-23T05:39:05.733Z,1516685945.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:06.101Z,1516685946.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:06.513Z,1516685946.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:06.513Z,1516685946.513 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-01-23T05:39:06.513Z,1516685946.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:39:06.515Z,1516685946.515 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:06.516Z,1516685946.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-01-23T05:39:06.516Z,1516685946.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:39:06.517Z,1516685946.517 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:06.517Z,1516685946.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48 2018-01-23T05:39:06.517Z,1516685946.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:39:06.541Z,1516685946.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:39:06.541Z,1516685946.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:39:06.542Z,1516685946.542 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:39:06.943Z,1516685946.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:39:06.943Z,1516685946.943 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-01-23T05:39:06.944Z,1516685946.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:39:06.944Z,1516685946.944 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-01-23T05:39:06.944Z,1516685946.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:39:06.944Z,1516685946.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48 2018-01-23T05:39:07.323Z,1516685947.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:39:07.323Z,1516685947.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:39:07.324Z,1516685947.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:39:07.324Z,1516685947.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:39:07.324Z,1516685947.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:39:07.325Z,1516685947.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:39:07.325Z,1516685947.325 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:39:07.325Z,1516685947.325 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:39:07.326Z,1516685947.326 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:39:07.716Z,1516685947.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:39:07.717Z,1516685947.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:08.099Z,1516685948.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:39:08.100Z,1516685948.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:08.510Z,1516685948.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:39:08.511Z,1516685948.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:08.920Z,1516685948.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:39:08.921Z,1516685948.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:09.311Z,1516685949.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:39:09.312Z,1516685949.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:09.721Z,1516685949.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:39:09.722Z,1516685949.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:10.108Z,1516685950.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:39:10.109Z,1516685950.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:10.509Z,1516685950.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:39:10.510Z,1516685950.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:10.910Z,1516685950.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:39:10.912Z,1516685950.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:11.328Z,1516685951.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:39:11.329Z,1516685951.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:11.755Z,1516685951.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:39:11.756Z,1516685951.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:12.116Z,1516685952.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:39:12.117Z,1516685952.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:12.510Z,1516685952.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:39:12.511Z,1516685952.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:12.919Z,1516685952.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:39:12.921Z,1516685952.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:13.314Z,1516685953.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:39:13.315Z,1516685953.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:13.718Z,1516685953.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:39:13.719Z,1516685953.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:14.113Z,1516685954.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:39:14.114Z,1516685954.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:14.507Z,1516685954.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:39:14.508Z,1516685954.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:14.920Z,1516685954.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:39:14.921Z,1516685954.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:15.316Z,1516685955.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:39:15.317Z,1516685955.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:15.720Z,1516685955.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:39:15.721Z,1516685955.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:16.107Z,1516685956.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:39:16.108Z,1516685956.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:16.508Z,1516685956.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:39:16.510Z,1516685956.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:16.920Z,1516685956.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:39:16.921Z,1516685956.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:17.317Z,1516685957.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:39:17.318Z,1516685957.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:20.572Z,1516685960.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:39:20.573Z,1516685960.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:20.720Z,1516685960.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s. 2018-01-23T05:39:20.721Z,1516685960.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:21.063Z,1516685961.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T05:39:21.064Z,1516685961.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:21.439Z,1516685961.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T05:39:21.439Z,1516685961.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:21.840Z,1516685961.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T05:39:21.841Z,1516685961.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:22.246Z,1516685962.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T05:39:22.247Z,1516685962.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:22.645Z,1516685962.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T05:39:22.646Z,1516685962.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:23.042Z,1516685963.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T05:39:23.043Z,1516685963.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:23.438Z,1516685963.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T05:39:23.439Z,1516685963.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:23.844Z,1516685963.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T05:39:23.845Z,1516685963.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:24.241Z,1516685964.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T05:39:24.241Z,1516685964.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:24.641Z,1516685964.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T05:39:24.642Z,1516685964.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:25.056Z,1516685965.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T05:39:25.057Z,1516685965.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:25.450Z,1516685965.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T05:39:25.451Z,1516685965.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:25.848Z,1516685965.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:39:25.849Z,1516685965.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:26.241Z,1516685966.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T05:39:26.242Z,1516685966.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:26.650Z,1516685966.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:27.049Z,1516685967.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:27.441Z,1516685967.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:27.849Z,1516685967.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:28.249Z,1516685968.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:28.649Z,1516685968.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:29.048Z,1516685969.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:29.449Z,1516685969.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:29.839Z,1516685969.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:30.241Z,1516685970.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:30.642Z,1516685970.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:31.055Z,1516685971.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:31.461Z,1516685971.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:31.850Z,1516685971.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:32.248Z,1516685972.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:32.657Z,1516685972.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:33.045Z,1516685973.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:33.443Z,1516685973.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:33.853Z,1516685973.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:34.254Z,1516685974.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:34.654Z,1516685974.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:35.052Z,1516685975.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:35.447Z,1516685975.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:35.855Z,1516685975.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:36.255Z,1516685976.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:36.653Z,1516685976.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:37.062Z,1516685977.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:37.465Z,1516685977.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:37.863Z,1516685977.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:38.236Z,1516685978.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:38.657Z,1516685978.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:39.061Z,1516685979.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:39.436Z,1516685979.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:39.836Z,1516685979.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:40.263Z,1516685980.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:40.666Z,1516685980.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:41.062Z,1516685981.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:41.440Z,1516685981.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:41.840Z,1516685981.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:42.241Z,1516685982.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:42.645Z,1516685982.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:43.046Z,1516685983.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:43.450Z,1516685983.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:43.849Z,1516685983.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:44.243Z,1516685984.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:44.644Z,1516685984.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:45.041Z,1516685985.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:45.449Z,1516685985.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:45.840Z,1516685985.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:46.245Z,1516685986.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:46.649Z,1516685986.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:47.046Z,1516685987.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:47.442Z,1516685987.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:47.841Z,1516685987.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:48.253Z,1516685988.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:48.649Z,1516685988.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:49.056Z,1516685989.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:49.457Z,1516685989.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:49.850Z,1516685989.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:50.242Z,1516685990.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:50.645Z,1516685990.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:51.041Z,1516685991.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:51.451Z,1516685991.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:51.841Z,1516685991.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:52.253Z,1516685992.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:52.666Z,1516685992.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:53.050Z,1516685993.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:53.442Z,1516685993.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:53.853Z,1516685993.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:54.246Z,1516685994.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:54.641Z,1516685994.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:55.052Z,1516685995.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:55.453Z,1516685995.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:55.850Z,1516685995.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:56.241Z,1516685996.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:56.645Z,1516685996.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:57.042Z,1516685997.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:57.449Z,1516685997.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:57.853Z,1516685997.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:58.249Z,1516685998.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:58.660Z,1516685998.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:59.050Z,1516685999.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:59.453Z,1516685999.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:39:59.844Z,1516685999.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:00.244Z,1516686000.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:00.641Z,1516686000.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:01.061Z,1516686001.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:01.449Z,1516686001.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:01.849Z,1516686001.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:02.244Z,1516686002.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:02.653Z,1516686002.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:03.049Z,1516686003.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:03.448Z,1516686003.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:03.849Z,1516686003.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:04.255Z,1516686004.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:04.653Z,1516686004.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:05.049Z,1516686005.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:05.443Z,1516686005.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:05.848Z,1516686005.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:06.248Z,1516686006.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:06.648Z,1516686006.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:07.050Z,1516686007.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:07.454Z,1516686007.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:07.865Z,1516686007.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:08.242Z,1516686008.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:08.649Z,1516686008.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:09.051Z,1516686009.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:09.444Z,1516686009.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:09.847Z,1516686009.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:10.250Z,1516686010.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:10.654Z,1516686010.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:11.053Z,1516686011.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:11.457Z,1516686011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:11.842Z,1516686011.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:12.249Z,1516686012.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:12.651Z,1516686012.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:13.056Z,1516686013.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:13.454Z,1516686013.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:13.853Z,1516686013.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:14.252Z,1516686014.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:14.649Z,1516686014.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:15.045Z,1516686015.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:15.446Z,1516686015.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:15.847Z,1516686015.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:16.269Z,1516686016.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:16.661Z,1516686016.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:17.060Z,1516686017.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:17.449Z,1516686017.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:20.551Z,1516686020.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:20.663Z,1516686020.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:21.024Z,1516686021.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:21.451Z,1516686021.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:21.852Z,1516686021.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:22.242Z,1516686022.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:22.624Z,1516686022.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:23.020Z,1516686023.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:23.444Z,1516686023.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:23.829Z,1516686023.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:24.223Z,1516686024.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:24.621Z,1516686024.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:25.052Z,1516686025.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:25.422Z,1516686025.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:25.848Z,1516686025.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:26.221Z,1516686026.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:26.640Z,1516686026.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:27.026Z,1516686027.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:27.427Z,1516686027.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:27.829Z,1516686027.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:28.247Z,1516686028.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:28.629Z,1516686028.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:29.043Z,1516686029.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:29.437Z,1516686029.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:29.842Z,1516686029.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:30.222Z,1516686030.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:30.629Z,1516686030.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:31.033Z,1516686031.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:31.453Z,1516686031.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:31.837Z,1516686031.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:32.226Z,1516686032.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:32.624Z,1516686032.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:33.026Z,1516686033.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:33.442Z,1516686033.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:33.830Z,1516686033.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:34.228Z,1516686034.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:34.629Z,1516686034.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:35.027Z,1516686035.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:35.434Z,1516686035.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:35.841Z,1516686035.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:36.223Z,1516686036.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:36.623Z,1516686036.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:37.028Z,1516686037.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:37.429Z,1516686037.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:37.826Z,1516686037.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:38.226Z,1516686038.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:38.621Z,1516686038.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:39.017Z,1516686039.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:39.426Z,1516686039.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:39.830Z,1516686039.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:40.240Z,1516686040.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:40.620Z,1516686040.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:41.021Z,1516686041.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:41.424Z,1516686041.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:41.826Z,1516686041.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:42.249Z,1516686042.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:42.664Z,1516686042.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:43.036Z,1516686043.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:43.421Z,1516686043.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:43.821Z,1516686043.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:44.224Z,1516686044.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:44.622Z,1516686044.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:45.021Z,1516686045.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:45.429Z,1516686045.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:45.830Z,1516686045.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:46.227Z,1516686046.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:46.624Z,1516686046.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:47.023Z,1516686047.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:47.423Z,1516686047.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:47.826Z,1516686047.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:48.227Z,1516686048.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:48.629Z,1516686048.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:49.027Z,1516686049.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:49.421Z,1516686049.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:49.823Z,1516686049.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:50.223Z,1516686050.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:50.621Z,1516686050.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:51.027Z,1516686051.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:51.441Z,1516686051.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:51.834Z,1516686051.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:52.226Z,1516686052.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:52.629Z,1516686052.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:53.023Z,1516686053.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:53.420Z,1516686053.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:53.829Z,1516686053.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:54.235Z,1516686054.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:54.633Z,1516686054.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:55.037Z,1516686055.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:55.427Z,1516686055.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:55.827Z,1516686055.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:56.229Z,1516686056.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:56.627Z,1516686056.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:57.027Z,1516686057.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:57.440Z,1516686057.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:57.833Z,1516686057.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:58.235Z,1516686058.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:58.629Z,1516686058.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:59.027Z,1516686059.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:59.429Z,1516686059.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:40:59.829Z,1516686059.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:00.235Z,1516686060.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:00.630Z,1516686060.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:01.030Z,1516686061.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:01.427Z,1516686061.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:01.827Z,1516686061.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:02.220Z,1516686062.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:02.609Z,1516686062.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:03.012Z,1516686063.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:03.442Z,1516686063.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:03.834Z,1516686063.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:04.241Z,1516686064.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:04.613Z,1516686064.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:05.014Z,1516686065.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:05.422Z,1516686065.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:05.817Z,1516686065.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:06.245Z,1516686066.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:06.652Z,1516686066.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:07.024Z,1516686067.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:07.416Z,1516686067.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:07.816Z,1516686067.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:08.225Z,1516686068.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:08.617Z,1516686068.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:09.021Z,1516686069.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:09.422Z,1516686069.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:09.822Z,1516686069.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:10.229Z,1516686070.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:10.617Z,1516686070.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:11.016Z,1516686071.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:11.418Z,1516686071.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:11.816Z,1516686071.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:12.226Z,1516686072.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:12.629Z,1516686072.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:13.032Z,1516686073.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:13.419Z,1516686073.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:13.817Z,1516686073.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:14.221Z,1516686074.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:14.618Z,1516686074.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:15.017Z,1516686075.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:15.427Z,1516686075.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:15.833Z,1516686075.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:16.225Z,1516686076.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:16.623Z,1516686076.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:17.026Z,1516686077.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:17.421Z,1516686077.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:17.817Z,1516686077.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:20.919Z,1516686080.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:21.085Z,1516686081.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:21.413Z,1516686081.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:21.785Z,1516686081.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:22.183Z,1516686082.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:22.584Z,1516686082.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:22.987Z,1516686082.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:23.393Z,1516686083.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:23.790Z,1516686083.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:24.190Z,1516686084.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:24.593Z,1516686084.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:24.984Z,1516686084.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:25.388Z,1516686085.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:25.793Z,1516686085.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:26.189Z,1516686086.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:26.590Z,1516686086.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:26.989Z,1516686086.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:27.385Z,1516686087.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:27.787Z,1516686087.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:28.185Z,1516686088.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:28.589Z,1516686088.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:28.990Z,1516686088.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:29.397Z,1516686089.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:29.798Z,1516686089.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:30.207Z,1516686090.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:30.586Z,1516686090.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:30.992Z,1516686090.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:31.401Z,1516686091.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:31.790Z,1516686091.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:32.196Z,1516686092.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:32.606Z,1516686092.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:33.002Z,1516686093.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:33.392Z,1516686093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:33.801Z,1516686093.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:34.188Z,1516686094.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:34.577Z,1516686094.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:34.976Z,1516686094.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:35.400Z,1516686095.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:35.809Z,1516686095.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:36.216Z,1516686096.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:36.584Z,1516686096.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:37.004Z,1516686097.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:37.405Z,1516686097.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:37.789Z,1516686097.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:38.214Z,1516686098.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:38.614Z,1516686098.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:38.990Z,1516686098.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:39.386Z,1516686099.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:39.792Z,1516686099.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:40.188Z,1516686100.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:40.593Z,1516686100.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:40.994Z,1516686100.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:41.407Z,1516686101.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:41.800Z,1516686101.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:42.196Z,1516686102.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:42.593Z,1516686102.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:42.993Z,1516686102.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:43.388Z,1516686103.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:43.792Z,1516686103.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:44.196Z,1516686104.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:44.599Z,1516686104.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:45.002Z,1516686105.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:45.386Z,1516686105.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:45.796Z,1516686105.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:46.192Z,1516686106.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:46.596Z,1516686106.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:46.989Z,1516686106.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:47.409Z,1516686107.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:47.799Z,1516686107.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:48.200Z,1516686108.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:48.591Z,1516686108.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:48.992Z,1516686108.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:49.393Z,1516686109.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:49.792Z,1516686109.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:50.205Z,1516686110.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:50.601Z,1516686110.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:51.002Z,1516686111.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:51.386Z,1516686111.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:51.795Z,1516686111.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:52.190Z,1516686112.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:52.595Z,1516686112.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:52.992Z,1516686112.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:53.402Z,1516686113.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:53.798Z,1516686113.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:54.195Z,1516686114.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:54.590Z,1516686114.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:54.991Z,1516686114.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:55.392Z,1516686115.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:55.790Z,1516686115.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:56.196Z,1516686116.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:56.599Z,1516686116.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:56.996Z,1516686116.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:57.395Z,1516686117.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:57.792Z,1516686117.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:58.202Z,1516686118.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:58.598Z,1516686118.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:58.994Z,1516686118.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:59.387Z,1516686119.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:41:59.794Z,1516686119.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:00.205Z,1516686120.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:00.598Z,1516686120.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:00.996Z,1516686120.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:01.388Z,1516686121.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:01.786Z,1516686121.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:02.204Z,1516686122.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:02.603Z,1516686122.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:03.002Z,1516686123.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:03.387Z,1516686123.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:03.792Z,1516686123.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:04.202Z,1516686124.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:04.598Z,1516686124.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:05.005Z,1516686125.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:05.388Z,1516686125.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:05.792Z,1516686125.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:06.205Z,1516686126.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:06.602Z,1516686126.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:06.994Z,1516686126.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:07.396Z,1516686127.396 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:07.396Z,1516686127.396 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-01-23T05:42:07.396Z,1516686127.396 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:42:07.398Z,1516686127.398 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:07.398Z,1516686127.398 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-01-23T05:42:07.398Z,1516686127.398 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:42:07.400Z,1516686127.400 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:07.400Z,1516686127.400 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49 2018-01-23T05:42:07.400Z,1516686127.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:42:07.412Z,1516686127.412 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:42:07.412Z,1516686127.412 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:42:07.412Z,1516686127.412 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:42:07.802Z,1516686127.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:42:07.802Z,1516686127.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-01-23T05:42:07.802Z,1516686127.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:42:07.803Z,1516686127.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-01-23T05:42:07.803Z,1516686127.803 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:42:07.803Z,1516686127.803 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49 2018-01-23T05:42:08.203Z,1516686128.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:42:08.204Z,1516686128.204 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:42:08.204Z,1516686128.204 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:42:08.205Z,1516686128.205 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:42:08.205Z,1516686128.205 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:42:08.205Z,1516686128.205 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:42:08.206Z,1516686128.206 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:42:08.206Z,1516686128.206 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:42:08.206Z,1516686128.206 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:42:08.598Z,1516686128.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:42:08.599Z,1516686128.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:09.002Z,1516686129.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:42:09.003Z,1516686129.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:09.395Z,1516686129.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:42:09.396Z,1516686129.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:09.796Z,1516686129.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:42:09.797Z,1516686129.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:10.205Z,1516686130.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:42:10.205Z,1516686130.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:10.600Z,1516686130.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:42:10.601Z,1516686130.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:10.997Z,1516686130.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:42:10.998Z,1516686130.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:11.389Z,1516686131.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:42:11.390Z,1516686131.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:11.775Z,1516686131.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:42:11.776Z,1516686131.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:12.206Z,1516686132.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:42:12.207Z,1516686132.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:12.608Z,1516686132.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:42:12.609Z,1516686132.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:13.008Z,1516686133.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:42:13.009Z,1516686133.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:13.380Z,1516686133.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:42:13.381Z,1516686133.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:13.780Z,1516686133.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:42:13.781Z,1516686133.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:14.202Z,1516686134.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:42:14.203Z,1516686134.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:14.600Z,1516686134.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:42:14.601Z,1516686134.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:15.004Z,1516686135.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:42:15.005Z,1516686135.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:15.404Z,1516686135.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:42:15.405Z,1516686135.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:15.786Z,1516686135.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:42:15.787Z,1516686135.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:16.210Z,1516686136.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:42:16.215Z,1516686136.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:16.593Z,1516686136.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:42:16.594Z,1516686136.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:16.613Z,1516686136.613 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:42:16.614Z,1516686136.614 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:42:16.614Z,1516686136.614 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:42:16.614Z,1516686136.614 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:42:16.992Z,1516686136.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:42:16.993Z,1516686136.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:16.996Z,1516686136.996 [Default:CheckIn:D] Stopped 2018-01-23T05:42:16.996Z,1516686136.996 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:42:17.386Z,1516686137.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:42:17.387Z,1516686137.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:17.391Z,1516686137.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.415609 min 2018-01-23T05:42:17.391Z,1516686137.391 [Default:CheckIn:E] Stopped 2018-01-23T05:42:17.391Z,1516686137.391 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:42:17.391Z,1516686137.391 [Default:CheckIn] Stopped 2018-01-23T05:42:17.391Z,1516686137.391 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:42:17.392Z,1516686137.392 [Default:CheckIn](INFO): Running loop #15 2018-01-23T05:42:17.392Z,1516686137.392 [Default:CheckIn] Running Loop=15 2018-01-23T05:42:17.392Z,1516686137.392 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:42:17.392Z,1516686137.392 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:42:17.790Z,1516686137.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:42:17.791Z,1516686137.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:18.193Z,1516686138.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:42:18.194Z,1516686138.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:21.320Z,1516686141.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T05:42:21.321Z,1516686141.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:21.464Z,1516686141.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:42:21.465Z,1516686141.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:21.796Z,1516686141.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:42:21.797Z,1516686141.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:22.193Z,1516686142.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:42:22.194Z,1516686142.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:22.590Z,1516686142.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:42:22.592Z,1516686142.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:22.994Z,1516686142.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:42:22.995Z,1516686142.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:23.394Z,1516686143.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:42:23.396Z,1516686143.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:23.794Z,1516686143.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:42:23.795Z,1516686143.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:24.194Z,1516686144.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:42:24.195Z,1516686144.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:24.596Z,1516686144.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:42:24.597Z,1516686144.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:24.989Z,1516686144.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:42:24.990Z,1516686144.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:25.389Z,1516686145.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:42:25.390Z,1516686145.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:25.800Z,1516686145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:42:25.801Z,1516686145.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:26.200Z,1516686146.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:42:26.201Z,1516686146.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:26.600Z,1516686146.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:42:26.601Z,1516686146.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:26.997Z,1516686146.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:42:26.998Z,1516686146.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:27.390Z,1516686147.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:42:27.392Z,1516686147.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:27.796Z,1516686147.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:28.202Z,1516686148.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:28.601Z,1516686148.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:29.007Z,1516686149.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:29.400Z,1516686149.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:29.791Z,1516686149.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:30.193Z,1516686150.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:30.602Z,1516686150.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:31.002Z,1516686151.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:31.409Z,1516686151.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:31.791Z,1516686151.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:32.196Z,1516686152.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:32.591Z,1516686152.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:32.991Z,1516686152.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:33.402Z,1516686153.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:33.802Z,1516686153.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:34.203Z,1516686154.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:34.596Z,1516686154.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:34.996Z,1516686154.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:35.391Z,1516686155.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:35.796Z,1516686155.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:36.196Z,1516686156.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:36.603Z,1516686156.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:37.002Z,1516686157.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:37.403Z,1516686157.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:37.795Z,1516686157.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:38.196Z,1516686158.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:38.590Z,1516686158.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:38.994Z,1516686158.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:39.403Z,1516686159.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:39.813Z,1516686159.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:40.211Z,1516686160.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:40.580Z,1516686160.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:40.980Z,1516686160.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:41.416Z,1516686161.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:41.788Z,1516686161.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:42.213Z,1516686162.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:42.598Z,1516686162.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:42.998Z,1516686162.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:43.394Z,1516686163.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:43.788Z,1516686163.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:44.197Z,1516686164.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:44.589Z,1516686164.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:44.989Z,1516686164.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:45.394Z,1516686165.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:45.794Z,1516686165.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:46.200Z,1516686166.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:46.588Z,1516686166.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:46.988Z,1516686166.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:47.389Z,1516686167.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:47.788Z,1516686167.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:48.189Z,1516686168.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:48.594Z,1516686168.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:48.994Z,1516686168.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:49.394Z,1516686169.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:49.789Z,1516686169.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:50.189Z,1516686170.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:50.589Z,1516686170.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:50.989Z,1516686170.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:51.410Z,1516686171.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:51.798Z,1516686171.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:52.200Z,1516686172.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:52.589Z,1516686172.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:52.988Z,1516686172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:53.389Z,1516686173.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:53.788Z,1516686173.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:54.188Z,1516686174.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:54.594Z,1516686174.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:54.994Z,1516686174.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:55.394Z,1516686175.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:55.790Z,1516686175.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:56.190Z,1516686176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:56.590Z,1516686176.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:56.991Z,1516686176.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:57.399Z,1516686177.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:57.798Z,1516686177.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:58.199Z,1516686178.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:58.592Z,1516686178.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:58.990Z,1516686178.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:59.395Z,1516686179.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:42:59.791Z,1516686179.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:00.201Z,1516686180.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:00.600Z,1516686180.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:01.005Z,1516686181.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:01.403Z,1516686181.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:01.790Z,1516686181.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:02.192Z,1516686182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:02.591Z,1516686182.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:02.996Z,1516686182.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:03.399Z,1516686183.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:03.803Z,1516686183.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:04.220Z,1516686184.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:04.591Z,1516686184.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:04.997Z,1516686184.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:05.396Z,1516686185.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:05.791Z,1516686185.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:06.190Z,1516686186.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:06.602Z,1516686186.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:06.997Z,1516686186.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:07.401Z,1516686187.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:07.789Z,1516686187.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:08.190Z,1516686188.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:08.592Z,1516686188.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:08.992Z,1516686188.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:09.402Z,1516686189.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:09.802Z,1516686189.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:10.201Z,1516686190.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:10.590Z,1516686190.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:10.990Z,1516686190.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:11.393Z,1516686191.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:11.789Z,1516686191.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:12.193Z,1516686192.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:12.601Z,1516686192.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:12.997Z,1516686192.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:13.402Z,1516686193.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:13.792Z,1516686193.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:14.190Z,1516686194.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:14.594Z,1516686194.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:14.992Z,1516686194.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:15.406Z,1516686195.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:15.805Z,1516686195.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:16.203Z,1516686196.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:16.590Z,1516686196.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:16.996Z,1516686196.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:17.392Z,1516686197.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:17.799Z,1516686197.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:18.196Z,1516686198.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:18.603Z,1516686198.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:21.693Z,1516686201.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:21.818Z,1516686201.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:22.165Z,1516686202.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:22.565Z,1516686202.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:22.965Z,1516686202.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:23.369Z,1516686203.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:23.769Z,1516686203.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:24.167Z,1516686204.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:24.565Z,1516686204.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:24.960Z,1516686204.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:25.365Z,1516686205.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:25.767Z,1516686205.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:26.168Z,1516686206.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:26.569Z,1516686206.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:26.973Z,1516686206.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:27.370Z,1516686207.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:27.768Z,1516686207.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:28.168Z,1516686208.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:28.561Z,1516686208.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:28.965Z,1516686208.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:29.371Z,1516686209.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:29.769Z,1516686209.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:30.173Z,1516686210.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:30.560Z,1516686210.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:30.966Z,1516686210.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:31.372Z,1516686211.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:31.766Z,1516686211.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:32.173Z,1516686212.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:32.581Z,1516686212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:32.978Z,1516686212.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:33.378Z,1516686213.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:33.762Z,1516686213.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:34.168Z,1516686214.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:34.569Z,1516686214.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:34.962Z,1516686214.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:35.372Z,1516686215.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:35.778Z,1516686215.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:36.180Z,1516686216.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:36.575Z,1516686216.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:36.976Z,1516686216.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:37.364Z,1516686217.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:37.773Z,1516686217.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:38.177Z,1516686218.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:38.577Z,1516686218.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:38.977Z,1516686218.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:39.376Z,1516686219.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:39.770Z,1516686219.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:40.169Z,1516686220.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:40.574Z,1516686220.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:40.973Z,1516686220.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:41.383Z,1516686221.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:41.779Z,1516686221.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:42.176Z,1516686222.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:42.581Z,1516686222.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:42.971Z,1516686222.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:43.375Z,1516686223.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:43.784Z,1516686223.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:44.178Z,1516686224.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:44.577Z,1516686224.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:44.977Z,1516686224.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:45.373Z,1516686225.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:45.770Z,1516686225.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:46.154Z,1516686226.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:46.581Z,1516686226.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:46.981Z,1516686226.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:47.389Z,1516686227.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:47.785Z,1516686227.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:48.158Z,1516686228.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:48.582Z,1516686228.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:48.986Z,1516686228.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:49.383Z,1516686229.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:49.789Z,1516686229.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:50.186Z,1516686230.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:50.581Z,1516686230.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:50.985Z,1516686230.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:51.386Z,1516686231.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:51.781Z,1516686231.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:52.189Z,1516686232.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:52.586Z,1516686232.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:52.961Z,1516686232.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:53.385Z,1516686233.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:53.789Z,1516686233.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:54.186Z,1516686234.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:54.565Z,1516686234.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:54.988Z,1516686234.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:55.358Z,1516686235.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x61409 got:0x25524 2018-01-23T05:43:55.390Z,1516686235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:55.787Z,1516686235.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:56.170Z,1516686236.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:56.589Z,1516686236.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:56.962Z,1516686236.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:57.395Z,1516686237.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:57.768Z,1516686237.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:58.190Z,1516686238.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:58.558Z,1516686238.558 [PNI_TCM](ERROR): CRC does not match. Expected:0x36168 got:0x21784 2018-01-23T05:43:58.577Z,1516686238.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:58.964Z,1516686238.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:59.378Z,1516686239.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:43:59.780Z,1516686239.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:00.175Z,1516686240.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:00.569Z,1516686240.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:00.965Z,1516686240.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:01.389Z,1516686241.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:01.771Z,1516686241.771 [PNI_TCM](ERROR): CRC does not match. Expected:0x17980 got:0x25818 2018-01-23T05:44:01.806Z,1516686241.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:02.169Z,1516686242.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:02.565Z,1516686242.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:02.966Z,1516686242.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:03.385Z,1516686243.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:03.778Z,1516686243.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:04.173Z,1516686244.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:04.571Z,1516686244.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:04.958Z,1516686244.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:05.381Z,1516686245.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:05.785Z,1516686245.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:06.189Z,1516686246.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:06.574Z,1516686246.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:06.981Z,1516686246.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:07.384Z,1516686247.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:07.796Z,1516686247.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:08.181Z,1516686248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:08.581Z,1516686248.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:08.972Z,1516686248.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:09.382Z,1516686249.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:09.785Z,1516686249.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:10.181Z,1516686250.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:10.556Z,1516686250.556 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T05:44:10.582Z,1516686250.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:10.987Z,1516686250.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:11.387Z,1516686251.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:11.782Z,1516686251.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:12.188Z,1516686252.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:12.590Z,1516686252.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:12.989Z,1516686252.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:13.389Z,1516686253.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:13.789Z,1516686253.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:14.179Z,1516686254.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:14.563Z,1516686254.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:14.969Z,1516686254.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:15.396Z,1516686255.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:15.409Z,1516686255.409 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:44:15.798Z,1516686255.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:16.164Z,1516686256.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:16.560Z,1516686256.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:16.975Z,1516686256.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:17.398Z,1516686257.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:17.772Z,1516686257.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:18.171Z,1516686258.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:18.570Z,1516686258.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:18.961Z,1516686258.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:22.071Z,1516686262.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:22.225Z,1516686262.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:22.598Z,1516686262.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:22.967Z,1516686262.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:23.359Z,1516686263.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:23.762Z,1516686263.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:24.160Z,1516686264.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:24.570Z,1516686264.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:24.979Z,1516686264.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:25.369Z,1516686265.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:25.770Z,1516686265.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:26.167Z,1516686266.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:26.575Z,1516686266.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:26.950Z,1516686266.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:27.353Z,1516686267.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:27.784Z,1516686267.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:28.184Z,1516686268.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:28.579Z,1516686268.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:28.987Z,1516686268.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:29.353Z,1516686269.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:29.782Z,1516686269.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:30.159Z,1516686270.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:30.567Z,1516686270.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:30.966Z,1516686270.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:31.365Z,1516686271.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:31.761Z,1516686271.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:32.159Z,1516686272.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:32.564Z,1516686272.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:32.960Z,1516686272.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:33.361Z,1516686273.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:33.762Z,1516686273.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:34.163Z,1516686274.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:34.562Z,1516686274.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:34.959Z,1516686274.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:35.361Z,1516686275.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:35.761Z,1516686275.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:36.159Z,1516686276.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:36.563Z,1516686276.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:36.966Z,1516686276.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:37.368Z,1516686277.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:37.761Z,1516686277.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:38.159Z,1516686278.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:38.564Z,1516686278.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:38.965Z,1516686278.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:39.360Z,1516686279.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:39.762Z,1516686279.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:40.163Z,1516686280.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:40.562Z,1516686280.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:40.964Z,1516686280.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:41.358Z,1516686281.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:41.759Z,1516686281.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:42.164Z,1516686282.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:42.563Z,1516686282.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:42.966Z,1516686282.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:43.368Z,1516686283.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:43.761Z,1516686283.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:44.166Z,1516686284.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:44.564Z,1516686284.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:44.960Z,1516686284.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:45.365Z,1516686285.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:45.772Z,1516686285.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:46.171Z,1516686286.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:46.570Z,1516686286.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:46.961Z,1516686286.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:47.373Z,1516686287.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:47.765Z,1516686287.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:48.161Z,1516686288.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:48.572Z,1516686288.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:48.978Z,1516686288.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:49.374Z,1516686289.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:49.765Z,1516686289.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:50.173Z,1516686290.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:50.569Z,1516686290.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:50.968Z,1516686290.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:51.383Z,1516686291.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:51.781Z,1516686291.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:52.175Z,1516686292.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:52.581Z,1516686292.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:52.969Z,1516686292.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:53.350Z,1516686293.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:53.752Z,1516686293.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:54.157Z,1516686294.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:54.586Z,1516686294.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:54.984Z,1516686294.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:55.385Z,1516686295.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:55.761Z,1516686295.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:56.159Z,1516686296.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:56.575Z,1516686296.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:56.959Z,1516686296.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:57.369Z,1516686297.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:57.763Z,1516686297.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:58.163Z,1516686298.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:58.563Z,1516686298.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:58.960Z,1516686298.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:59.360Z,1516686299.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:44:59.769Z,1516686299.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:00.160Z,1516686300.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:00.567Z,1516686300.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:00.966Z,1516686300.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:01.365Z,1516686301.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:01.765Z,1516686301.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:02.165Z,1516686302.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:02.560Z,1516686302.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:02.961Z,1516686302.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:03.359Z,1516686303.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:03.770Z,1516686303.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:04.165Z,1516686304.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:04.573Z,1516686304.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:04.960Z,1516686304.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:05.359Z,1516686305.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:05.767Z,1516686305.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:06.160Z,1516686306.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:06.573Z,1516686306.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:06.973Z,1516686306.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:07.373Z,1516686307.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:07.769Z,1516686307.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:08.169Z,1516686308.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:08.561Z,1516686308.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:08.561Z,1516686308.561 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-01-23T05:45:08.561Z,1516686308.561 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:45:08.563Z,1516686308.563 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:08.563Z,1516686308.563 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-01-23T05:45:08.563Z,1516686308.563 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:45:08.565Z,1516686308.565 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:08.565Z,1516686308.565 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50 2018-01-23T05:45:08.565Z,1516686308.565 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:45:08.577Z,1516686308.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:45:08.577Z,1516686308.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:45:08.577Z,1516686308.577 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:45:08.973Z,1516686308.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:45:08.973Z,1516686308.973 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-01-23T05:45:08.974Z,1516686308.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:45:08.974Z,1516686308.974 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-01-23T05:45:08.975Z,1516686308.975 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:45:08.975Z,1516686308.975 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50 2018-01-23T05:45:09.376Z,1516686309.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:45:09.377Z,1516686309.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:45:09.377Z,1516686309.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:45:09.377Z,1516686309.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:45:09.378Z,1516686309.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:45:09.378Z,1516686309.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:45:09.379Z,1516686309.379 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:45:09.379Z,1516686309.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:45:09.379Z,1516686309.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:45:09.774Z,1516686309.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:45:09.775Z,1516686309.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:10.174Z,1516686310.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:45:10.175Z,1516686310.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:10.581Z,1516686310.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:45:10.582Z,1516686310.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:10.978Z,1516686310.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:45:10.979Z,1516686310.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:11.353Z,1516686311.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:45:11.354Z,1516686311.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:11.780Z,1516686311.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:45:11.781Z,1516686311.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:12.159Z,1516686312.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:45:12.160Z,1516686312.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:12.589Z,1516686312.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:45:12.590Z,1516686312.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:12.970Z,1516686312.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:45:12.983Z,1516686312.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:13.362Z,1516686313.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:45:13.363Z,1516686313.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:13.768Z,1516686313.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:45:13.769Z,1516686313.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:14.160Z,1516686314.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:45:14.161Z,1516686314.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:14.560Z,1516686314.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:45:14.561Z,1516686314.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:14.962Z,1516686314.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:45:14.963Z,1516686314.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:15.364Z,1516686315.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:45:15.365Z,1516686315.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:15.772Z,1516686315.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:45:15.773Z,1516686315.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:16.168Z,1516686316.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:45:16.169Z,1516686316.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:16.568Z,1516686316.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:45:16.569Z,1516686316.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:16.968Z,1516686316.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:45:16.969Z,1516686316.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:17.359Z,1516686317.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:45:17.360Z,1516686317.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:17.762Z,1516686317.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:45:17.764Z,1516686317.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:18.170Z,1516686318.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:45:18.172Z,1516686318.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:18.569Z,1516686318.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:45:18.570Z,1516686318.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:18.973Z,1516686318.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:45:18.974Z,1516686318.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:19.379Z,1516686319.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:45:19.380Z,1516686319.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:22.482Z,1516686322.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T05:45:22.483Z,1516686322.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:22.628Z,1516686322.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T05:45:22.629Z,1516686322.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:23.010Z,1516686323.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:45:23.015Z,1516686323.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:23.413Z,1516686323.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T05:45:23.414Z,1516686323.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:23.794Z,1516686323.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:45:23.807Z,1516686323.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:24.185Z,1516686324.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:45:24.186Z,1516686324.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:24.586Z,1516686324.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:45:24.591Z,1516686324.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:24.985Z,1516686324.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:45:24.985Z,1516686324.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:25.406Z,1516686325.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:45:25.415Z,1516686325.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:25.813Z,1516686325.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T05:45:25.813Z,1516686325.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:26.213Z,1516686326.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T05:45:26.214Z,1516686326.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:26.625Z,1516686326.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T05:45:26.626Z,1516686326.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:27.017Z,1516686327.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T05:45:27.018Z,1516686327.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:27.427Z,1516686327.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T05:45:27.428Z,1516686327.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:27.818Z,1516686327.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T05:45:27.823Z,1516686327.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:28.189Z,1516686328.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:45:28.190Z,1516686328.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:28.605Z,1516686328.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:28.999Z,1516686328.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:29.397Z,1516686329.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:29.801Z,1516686329.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:30.216Z,1516686330.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:30.585Z,1516686330.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:31.028Z,1516686331.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:31.401Z,1516686331.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:31.837Z,1516686331.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:32.251Z,1516686332.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:32.623Z,1516686332.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:33.013Z,1516686333.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:33.406Z,1516686333.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:33.797Z,1516686333.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:34.208Z,1516686334.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:34.650Z,1516686334.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:35.046Z,1516686335.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:35.413Z,1516686335.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:35.826Z,1516686335.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:36.217Z,1516686336.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:36.620Z,1516686336.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:37.023Z,1516686337.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:37.428Z,1516686337.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:37.801Z,1516686337.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:38.238Z,1516686338.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:38.645Z,1516686338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:38.985Z,1516686338.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:39.392Z,1516686339.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:39.791Z,1516686339.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:40.189Z,1516686340.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:40.594Z,1516686340.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:40.998Z,1516686340.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:41.396Z,1516686341.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:41.791Z,1516686341.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:42.197Z,1516686342.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:42.590Z,1516686342.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:42.996Z,1516686342.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:43.393Z,1516686343.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:43.795Z,1516686343.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:44.200Z,1516686344.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:44.596Z,1516686344.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:44.990Z,1516686344.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:45.391Z,1516686345.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:45.800Z,1516686345.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:46.195Z,1516686346.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:46.605Z,1516686346.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:47.002Z,1516686347.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:47.402Z,1516686347.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:47.788Z,1516686347.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:48.205Z,1516686348.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:48.599Z,1516686348.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:48.997Z,1516686348.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:49.375Z,1516686349.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:49.809Z,1516686349.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:50.208Z,1516686350.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:50.604Z,1516686350.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:50.996Z,1516686350.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:51.393Z,1516686351.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:51.788Z,1516686351.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:52.188Z,1516686352.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:52.589Z,1516686352.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:52.989Z,1516686352.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:53.389Z,1516686353.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:53.782Z,1516686353.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:54.185Z,1516686354.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:54.589Z,1516686354.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:54.985Z,1516686354.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:55.384Z,1516686355.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:55.793Z,1516686355.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:56.197Z,1516686356.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:56.600Z,1516686356.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:56.988Z,1516686356.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:57.388Z,1516686357.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:57.785Z,1516686357.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:58.188Z,1516686358.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:58.593Z,1516686358.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:58.993Z,1516686358.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:59.394Z,1516686359.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:45:59.793Z,1516686359.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:00.188Z,1516686360.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:00.585Z,1516686360.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:00.993Z,1516686360.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:01.390Z,1516686361.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:01.794Z,1516686361.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:02.193Z,1516686362.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:02.594Z,1516686362.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:02.986Z,1516686362.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:03.386Z,1516686363.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:03.793Z,1516686363.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:04.188Z,1516686364.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:04.600Z,1516686364.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:04.997Z,1516686364.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:05.397Z,1516686365.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:05.785Z,1516686365.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:06.192Z,1516686366.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:06.590Z,1516686366.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:06.999Z,1516686366.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:07.397Z,1516686367.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:07.795Z,1516686367.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:08.198Z,1516686368.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:08.604Z,1516686368.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:08.986Z,1516686368.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:09.397Z,1516686369.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:09.787Z,1516686369.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:10.186Z,1516686370.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:10.595Z,1516686370.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:11.000Z,1516686371.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:11.403Z,1516686371.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:11.788Z,1516686371.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:12.195Z,1516686372.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:12.595Z,1516686372.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:13.001Z,1516686373.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:13.393Z,1516686373.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:13.779Z,1516686373.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:14.180Z,1516686374.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:14.590Z,1516686374.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:14.992Z,1516686374.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:15.386Z,1516686375.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:15.778Z,1516686375.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:16.174Z,1516686376.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:16.590Z,1516686376.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:16.994Z,1516686376.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:17.387Z,1516686377.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:17.778Z,1516686377.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:18.198Z,1516686378.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:18.595Z,1516686378.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:19.005Z,1516686379.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:19.395Z,1516686379.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:22.487Z,1516686382.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:22.637Z,1516686382.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:22.955Z,1516686382.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:23.366Z,1516686383.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:23.771Z,1516686383.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:24.156Z,1516686384.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:24.552Z,1516686384.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:24.954Z,1516686384.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:25.353Z,1516686385.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:25.768Z,1516686385.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:26.163Z,1516686386.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:26.561Z,1516686386.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:26.952Z,1516686386.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:27.351Z,1516686387.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:27.753Z,1516686387.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:28.153Z,1516686388.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:28.552Z,1516686388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:28.969Z,1516686388.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:29.362Z,1516686389.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:29.789Z,1516686389.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:30.153Z,1516686390.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:30.552Z,1516686390.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:30.953Z,1516686390.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:31.351Z,1516686391.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:31.768Z,1516686391.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:32.163Z,1516686392.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:32.569Z,1516686392.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:32.956Z,1516686392.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:33.353Z,1516686393.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:33.760Z,1516686393.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:34.157Z,1516686394.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:34.561Z,1516686394.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:34.965Z,1516686394.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:35.365Z,1516686395.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:35.762Z,1516686395.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:36.152Z,1516686396.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:36.553Z,1516686396.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:36.955Z,1516686396.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:37.358Z,1516686397.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:37.763Z,1516686397.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:38.166Z,1516686398.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:38.562Z,1516686398.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:38.953Z,1516686398.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:39.365Z,1516686399.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:39.765Z,1516686399.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:40.154Z,1516686400.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:40.557Z,1516686400.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:40.963Z,1516686400.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:41.367Z,1516686401.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:41.763Z,1516686401.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:42.153Z,1516686402.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:42.555Z,1516686402.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:42.956Z,1516686402.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:43.355Z,1516686403.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:43.765Z,1516686403.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:44.166Z,1516686404.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:44.562Z,1516686404.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:44.954Z,1516686404.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:45.353Z,1516686405.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:45.754Z,1516686405.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:46.155Z,1516686406.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:46.553Z,1516686406.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:46.963Z,1516686406.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:47.368Z,1516686407.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:47.763Z,1516686407.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:48.165Z,1516686408.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:48.554Z,1516686408.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:48.956Z,1516686408.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:49.358Z,1516686409.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:49.772Z,1516686409.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:50.168Z,1516686410.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:50.565Z,1516686410.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:50.964Z,1516686410.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:51.354Z,1516686411.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:51.761Z,1516686411.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:52.162Z,1516686412.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:52.559Z,1516686412.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:52.965Z,1516686412.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:53.379Z,1516686413.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:53.763Z,1516686413.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:54.164Z,1516686414.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:54.566Z,1516686414.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:54.958Z,1516686414.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:55.360Z,1516686415.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:55.766Z,1516686415.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:56.162Z,1516686416.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:56.562Z,1516686416.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:56.961Z,1516686416.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:57.349Z,1516686417.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:57.762Z,1516686417.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:58.165Z,1516686418.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:58.564Z,1516686418.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:58.973Z,1516686418.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:59.378Z,1516686419.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:46:59.777Z,1516686419.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:00.164Z,1516686420.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:00.565Z,1516686420.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:00.956Z,1516686420.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:01.369Z,1516686421.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:01.775Z,1516686421.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:02.166Z,1516686422.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:02.570Z,1516686422.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:02.953Z,1516686422.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:03.345Z,1516686423.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:03.773Z,1516686423.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:04.153Z,1516686424.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:04.552Z,1516686424.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:04.983Z,1516686424.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:05.383Z,1516686425.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:05.759Z,1516686425.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:06.151Z,1516686426.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:06.552Z,1516686426.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:06.955Z,1516686426.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:07.357Z,1516686427.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:07.758Z,1516686427.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:08.157Z,1516686428.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:08.565Z,1516686428.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:08.956Z,1516686428.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:09.351Z,1516686429.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:09.751Z,1516686429.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:10.153Z,1516686430.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:10.551Z,1516686430.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:10.957Z,1516686430.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:11.358Z,1516686431.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:11.759Z,1516686431.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:12.151Z,1516686432.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:12.552Z,1516686432.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:12.961Z,1516686432.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:13.361Z,1516686433.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:13.762Z,1516686433.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:14.169Z,1516686434.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:14.561Z,1516686434.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:14.952Z,1516686434.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:15.351Z,1516686435.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:15.761Z,1516686435.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:16.153Z,1516686436.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:16.558Z,1516686436.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:16.961Z,1516686436.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:17.362Z,1516686437.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:17.772Z,1516686437.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:17.780Z,1516686437.780 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:42:17.4Z 2018-01-23T05:47:17.780Z,1516686437.780 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:47:17.780Z,1516686437.780 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:47:18.161Z,1516686438.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:18.675Z,1516686438.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:18.960Z,1516686438.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:22.079Z,1516686442.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:22.155Z,1516686442.155 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0060.lzma 2018-01-23T05:47:22.159Z,1516686442.159 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:47:22.159Z,1516686442.159 [NAL9602] Data Fault, FailCount= 4 2018-01-23T05:47:22.159Z,1516686442.159 [NAL9602](ERROR): Data Fault 2018-01-23T05:47:22.212Z,1516686442.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:22.233Z,1516686442.233 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:47:22.536Z,1516686442.536 [NAL9602](INFO): Powering down 2018-01-23T05:47:22.590Z,1516686442.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:22.933Z,1516686442.933 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0060.lzma.bak 2018-01-23T05:47:22.933Z,1516686442.933 [DataOverHttps](INFO): SBD MOMSN=7755087 2018-01-23T05:47:22.990Z,1516686442.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:23.613Z,1516686443.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:23.638Z,1516686443.638 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T05:47:23.647Z,1516686443.647 [NAL9602] No Fault, FailCount= 4 2018-01-23T05:47:23.779Z,1516686443.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:26.871Z,1516686446.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:26.987Z,1516686446.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:27.337Z,1516686447.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:27.743Z,1516686447.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:28.144Z,1516686448.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:28.538Z,1516686448.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:31.772Z,1516686451.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:35.317Z,1516686455.317 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0061.lzma 2018-01-23T05:47:35.373Z,1516686455.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:35.493Z,1516686455.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:35.801Z,1516686455.801 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0061.lzma.bak 2018-01-23T05:47:35.801Z,1516686455.801 [DataOverHttps](INFO): SBD MOMSN=7755089 2018-01-23T05:47:35.853Z,1516686455.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:36.496Z,1516686456.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:36.499Z,1516686456.499 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:47:36.499Z,1516686456.499 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:47:36.499Z,1516686456.499 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:47:36.636Z,1516686456.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:39.833Z,1516686459.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:39.975Z,1516686459.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:40.297Z,1516686460.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:40.701Z,1516686460.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:41.096Z,1516686461.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:41.501Z,1516686461.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:41.899Z,1516686461.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:42.298Z,1516686462.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:42.705Z,1516686462.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:43.097Z,1516686463.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:43.498Z,1516686463.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:43.903Z,1516686463.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:44.301Z,1516686464.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:44.702Z,1516686464.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:45.098Z,1516686465.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:45.498Z,1516686465.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:45.901Z,1516686465.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:46.300Z,1516686466.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:46.698Z,1516686466.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:47.096Z,1516686467.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:47.497Z,1516686467.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:47.898Z,1516686467.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:48.296Z,1516686468.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:48.700Z,1516686468.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:49.098Z,1516686469.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:49.499Z,1516686469.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:49.913Z,1516686469.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:50.302Z,1516686470.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:50.703Z,1516686470.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:51.101Z,1516686471.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:51.504Z,1516686471.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:51.903Z,1516686471.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:52.302Z,1516686472.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:52.660Z,1516686472.660 [NAL9602](INFO): Powering up NAL9602 2018-01-23T05:47:52.704Z,1516686472.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:53.105Z,1516686473.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:53.509Z,1516686473.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:53.909Z,1516686473.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:54.308Z,1516686474.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:54.702Z,1516686474.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:55.103Z,1516686475.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:55.502Z,1516686475.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:55.913Z,1516686475.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:56.294Z,1516686476.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:56.695Z,1516686476.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:57.098Z,1516686477.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:57.502Z,1516686477.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:57.891Z,1516686477.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:58.325Z,1516686478.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:58.695Z,1516686478.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:59.095Z,1516686479.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:59.504Z,1516686479.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:47:59.897Z,1516686479.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:00.296Z,1516686480.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:00.707Z,1516686480.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:01.098Z,1516686481.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:01.499Z,1516686481.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:01.900Z,1516686481.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:02.298Z,1516686482.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:02.702Z,1516686482.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:03.106Z,1516686483.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:03.460Z,1516686483.460 [NAL9602](INFO): NAL9602 initialized 2018-01-23T05:48:03.508Z,1516686483.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:03.899Z,1516686483.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:04.306Z,1516686484.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:04.706Z,1516686484.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:05.104Z,1516686485.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:05.500Z,1516686485.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:05.902Z,1516686485.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:06.298Z,1516686486.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:06.710Z,1516686486.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:07.110Z,1516686487.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:07.504Z,1516686487.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:07.900Z,1516686487.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:08.299Z,1516686488.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:08.700Z,1516686488.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:09.100Z,1516686489.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:09.505Z,1516686489.505 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:09.505Z,1516686489.505 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-01-23T05:48:09.505Z,1516686489.505 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:48:09.507Z,1516686489.507 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:09.507Z,1516686489.507 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-01-23T05:48:09.507Z,1516686489.507 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:48:09.509Z,1516686489.509 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:09.509Z,1516686489.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51 2018-01-23T05:48:09.509Z,1516686489.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:48:09.537Z,1516686489.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:48:09.538Z,1516686489.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:48:09.538Z,1516686489.538 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:48:09.920Z,1516686489.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:48:09.920Z,1516686489.920 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-01-23T05:48:09.920Z,1516686489.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:48:09.920Z,1516686489.920 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-01-23T05:48:09.921Z,1516686489.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:48:09.921Z,1516686489.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51 2018-01-23T05:48:10.312Z,1516686490.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:48:10.312Z,1516686490.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:48:10.313Z,1516686490.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:48:10.313Z,1516686490.313 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:48:10.313Z,1516686490.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:48:10.314Z,1516686490.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:48:10.314Z,1516686490.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:48:10.319Z,1516686490.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:48:10.319Z,1516686490.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:48:10.701Z,1516686490.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:48:10.702Z,1516686490.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:11.107Z,1516686491.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:48:11.108Z,1516686491.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:11.508Z,1516686491.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:48:11.509Z,1516686491.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:11.902Z,1516686491.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:48:11.904Z,1516686491.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:12.307Z,1516686492.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:48:12.308Z,1516686492.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:12.721Z,1516686492.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:48:12.722Z,1516686492.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:13.114Z,1516686493.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:48:13.116Z,1516686493.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:13.511Z,1516686493.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:48:13.512Z,1516686493.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:13.912Z,1516686493.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:48:13.913Z,1516686493.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:14.305Z,1516686494.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:48:14.306Z,1516686494.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:14.709Z,1516686494.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:48:14.710Z,1516686494.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:15.092Z,1516686495.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:48:15.093Z,1516686495.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:15.520Z,1516686495.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:48:15.521Z,1516686495.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:15.924Z,1516686495.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:48:15.925Z,1516686495.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:16.319Z,1516686496.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:48:16.320Z,1516686496.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:16.701Z,1516686496.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:48:16.702Z,1516686496.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:17.099Z,1516686497.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:48:17.100Z,1516686497.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:17.498Z,1516686497.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:48:17.499Z,1516686497.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:17.901Z,1516686497.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:48:17.902Z,1516686497.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:18.301Z,1516686498.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:48:18.302Z,1516686498.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:18.702Z,1516686498.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:48:18.703Z,1516686498.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:19.216Z,1516686499.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T05:48:19.217Z,1516686499.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:19.530Z,1516686499.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:48:19.531Z,1516686499.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:19.920Z,1516686499.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:48:19.921Z,1516686499.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:20.316Z,1516686500.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:48:20.317Z,1516686500.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:20.700Z,1516686500.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:48:20.701Z,1516686500.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:21.144Z,1516686501.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:48:21.145Z,1516686501.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:21.526Z,1516686501.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:48:21.527Z,1516686501.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:21.926Z,1516686501.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:48:21.927Z,1516686501.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:22.327Z,1516686502.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:48:22.328Z,1516686502.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:22.704Z,1516686502.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:48:22.705Z,1516686502.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:23.097Z,1516686503.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:48:23.098Z,1516686503.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:23.498Z,1516686503.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:48:23.499Z,1516686503.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:23.904Z,1516686503.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:48:23.905Z,1516686503.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:24.297Z,1516686504.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:48:24.298Z,1516686504.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:24.701Z,1516686504.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:48:24.702Z,1516686504.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:25.130Z,1516686505.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:48:25.131Z,1516686505.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:25.508Z,1516686505.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:48:25.509Z,1516686505.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:25.903Z,1516686505.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:48:25.904Z,1516686505.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:26.300Z,1516686506.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:48:26.301Z,1516686506.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:26.698Z,1516686506.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:48:26.699Z,1516686506.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:27.098Z,1516686507.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:48:27.099Z,1516686507.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:27.502Z,1516686507.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:48:27.503Z,1516686507.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:27.905Z,1516686507.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:48:27.906Z,1516686507.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:28.308Z,1516686508.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:48:28.309Z,1516686508.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:28.700Z,1516686508.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:48:28.701Z,1516686508.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:29.097Z,1516686509.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:48:29.098Z,1516686509.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:29.504Z,1516686509.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T05:48:29.505Z,1516686509.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:29.901Z,1516686509.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:30.298Z,1516686510.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:30.702Z,1516686510.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:31.106Z,1516686511.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:31.514Z,1516686511.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:31.904Z,1516686511.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:32.303Z,1516686512.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:32.699Z,1516686512.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:33.099Z,1516686513.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:33.505Z,1516686513.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:33.905Z,1516686513.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:34.308Z,1516686514.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:34.703Z,1516686514.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:35.098Z,1516686515.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:35.499Z,1516686515.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:35.902Z,1516686515.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:36.298Z,1516686516.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:36.708Z,1516686516.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:37.110Z,1516686517.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:40.207Z,1516686520.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:40.341Z,1516686520.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:40.702Z,1516686520.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:41.104Z,1516686521.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:41.521Z,1516686521.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:41.917Z,1516686521.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:42.320Z,1516686522.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:42.709Z,1516686522.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:43.101Z,1516686523.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:43.500Z,1516686523.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:43.901Z,1516686523.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:44.300Z,1516686524.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:44.710Z,1516686524.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:45.109Z,1516686525.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:45.509Z,1516686525.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:45.909Z,1516686525.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:46.301Z,1516686526.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:46.701Z,1516686526.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:47.108Z,1516686527.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:47.509Z,1516686527.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:47.917Z,1516686527.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:48.313Z,1516686528.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:48.709Z,1516686528.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:49.105Z,1516686529.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:49.508Z,1516686529.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:49.902Z,1516686529.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:50.301Z,1516686530.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:50.710Z,1516686530.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:51.117Z,1516686531.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:51.514Z,1516686531.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:51.903Z,1516686531.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:52.303Z,1516686532.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:52.712Z,1516686532.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:53.113Z,1516686533.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:53.516Z,1516686533.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:53.915Z,1516686533.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:54.321Z,1516686534.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:54.708Z,1516686534.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:55.102Z,1516686535.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:55.513Z,1516686535.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:55.909Z,1516686535.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:56.302Z,1516686536.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:56.715Z,1516686536.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:57.103Z,1516686537.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:57.531Z,1516686537.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:57.914Z,1516686537.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:58.290Z,1516686538.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:58.713Z,1516686538.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:59.091Z,1516686539.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:59.525Z,1516686539.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:48:59.925Z,1516686539.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:00.324Z,1516686540.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:00.705Z,1516686540.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:01.101Z,1516686541.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:01.499Z,1516686541.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:01.900Z,1516686541.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:02.307Z,1516686542.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:02.711Z,1516686542.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:03.109Z,1516686543.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:03.517Z,1516686543.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:03.907Z,1516686543.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:04.301Z,1516686544.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:04.701Z,1516686544.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:05.110Z,1516686545.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:05.514Z,1516686545.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:05.920Z,1516686545.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:06.314Z,1516686546.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:06.705Z,1516686546.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:07.107Z,1516686547.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:07.502Z,1516686547.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:07.902Z,1516686547.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:08.307Z,1516686548.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:08.710Z,1516686548.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:09.111Z,1516686549.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:09.513Z,1516686549.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:09.902Z,1516686549.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:10.301Z,1516686550.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:10.708Z,1516686550.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:11.107Z,1516686551.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:11.514Z,1516686551.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:11.914Z,1516686551.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:12.318Z,1516686552.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:12.713Z,1516686552.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:13.105Z,1516686553.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:13.510Z,1516686553.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:13.906Z,1516686553.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:14.307Z,1516686554.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:14.717Z,1516686554.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:15.109Z,1516686555.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:15.525Z,1516686555.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:15.912Z,1516686555.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:16.305Z,1516686556.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:16.705Z,1516686556.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:17.116Z,1516686557.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:17.514Z,1516686557.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:17.915Z,1516686557.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:18.313Z,1516686558.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:18.713Z,1516686558.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:19.117Z,1516686559.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:19.508Z,1516686559.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:19.905Z,1516686559.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:20.313Z,1516686560.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:20.719Z,1516686560.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:21.110Z,1516686561.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:21.512Z,1516686561.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:21.916Z,1516686561.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:22.301Z,1516686562.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:22.709Z,1516686562.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:23.103Z,1516686563.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:23.524Z,1516686563.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:23.921Z,1516686563.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:24.329Z,1516686564.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:24.718Z,1516686564.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:25.117Z,1516686565.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:25.508Z,1516686565.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:25.900Z,1516686565.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:26.296Z,1516686566.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:26.724Z,1516686566.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:27.122Z,1516686567.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:27.530Z,1516686567.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:27.901Z,1516686567.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:28.306Z,1516686568.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:28.702Z,1516686568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:29.105Z,1516686569.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:29.518Z,1516686569.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:29.913Z,1516686569.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:30.310Z,1516686570.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:30.713Z,1516686570.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:31.106Z,1516686571.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:31.525Z,1516686571.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:31.914Z,1516686571.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:32.321Z,1516686572.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:32.708Z,1516686572.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:33.107Z,1516686573.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:33.509Z,1516686573.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:33.909Z,1516686573.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:34.307Z,1516686574.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:34.721Z,1516686574.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:35.125Z,1516686575.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:35.525Z,1516686575.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:35.917Z,1516686575.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:36.321Z,1516686576.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:36.708Z,1516686576.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:37.113Z,1516686577.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:40.222Z,1516686580.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:40.359Z,1516686580.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:40.725Z,1516686580.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:41.128Z,1516686581.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:41.529Z,1516686581.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:41.933Z,1516686581.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:42.320Z,1516686582.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:42.737Z,1516686582.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:43.137Z,1516686583.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:43.533Z,1516686583.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:43.933Z,1516686583.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:44.326Z,1516686584.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:44.723Z,1516686584.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:45.133Z,1516686585.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:45.537Z,1516686585.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:45.936Z,1516686585.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:46.331Z,1516686586.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:46.723Z,1516686586.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:47.128Z,1516686587.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:47.541Z,1516686587.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:47.933Z,1516686587.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:48.340Z,1516686588.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:48.733Z,1516686588.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:49.124Z,1516686589.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:49.536Z,1516686589.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:49.937Z,1516686589.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:50.337Z,1516686590.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:50.723Z,1516686590.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:51.126Z,1516686591.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:51.537Z,1516686591.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:51.934Z,1516686591.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:52.336Z,1516686592.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:52.732Z,1516686592.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:53.127Z,1516686593.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:53.537Z,1516686593.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:53.941Z,1516686593.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:54.337Z,1516686594.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:54.724Z,1516686594.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:55.131Z,1516686595.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:55.544Z,1516686595.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:55.937Z,1516686595.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:56.337Z,1516686596.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:56.725Z,1516686596.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:57.145Z,1516686597.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:57.529Z,1516686597.529 [PNI_TCM](ERROR): CRC does not match. Expected:0x43099 got:0x7618 2018-01-23T05:49:57.572Z,1516686597.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:57.936Z,1516686597.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:58.332Z,1516686598.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:58.729Z,1516686598.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:59.131Z,1516686599.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:59.536Z,1516686599.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:49:59.936Z,1516686599.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:00.335Z,1516686600.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:00.729Z,1516686600.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:01.127Z,1516686601.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:01.527Z,1516686601.527 [PNI_TCM](ERROR): CRC does not match. Expected:0x53951 got:0x50716 2018-01-23T05:50:01.545Z,1516686601.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:01.945Z,1516686601.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:02.336Z,1516686602.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:02.733Z,1516686602.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:03.127Z,1516686603.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:03.549Z,1516686603.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:03.934Z,1516686603.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T05:50:03.953Z,1516686603.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:04.334Z,1516686604.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:04.724Z,1516686604.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:05.132Z,1516686605.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:05.537Z,1516686605.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:05.937Z,1516686605.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:06.336Z,1516686606.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:06.745Z,1516686606.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:07.129Z,1516686607.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:07.544Z,1516686607.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:07.945Z,1516686607.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:08.345Z,1516686608.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:08.732Z,1516686608.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:09.129Z,1516686609.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:09.534Z,1516686609.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:09.949Z,1516686609.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:10.338Z,1516686610.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:10.730Z,1516686610.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:11.132Z,1516686611.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:11.536Z,1516686611.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:11.940Z,1516686611.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:12.339Z,1516686612.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:12.730Z,1516686612.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:13.136Z,1516686613.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:13.550Z,1516686613.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:13.942Z,1516686613.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:14.348Z,1516686614.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:14.734Z,1516686614.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:15.119Z,1516686615.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:15.549Z,1516686615.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:15.949Z,1516686615.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:16.353Z,1516686616.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:16.717Z,1516686616.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:17.117Z,1516686617.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:17.530Z,1516686617.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:17.927Z,1516686617.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:18.332Z,1516686618.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:18.727Z,1516686618.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:19.121Z,1516686619.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:19.530Z,1516686619.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:19.929Z,1516686619.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:20.340Z,1516686620.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:20.729Z,1516686620.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:21.120Z,1516686621.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:21.530Z,1516686621.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:21.932Z,1516686621.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:22.334Z,1516686622.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:22.729Z,1516686622.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:23.124Z,1516686623.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:23.523Z,1516686623.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:23.934Z,1516686623.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:24.319Z,1516686624.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:24.729Z,1516686624.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:25.185Z,1516686625.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:25.565Z,1516686625.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:25.944Z,1516686625.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:26.330Z,1516686626.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:26.776Z,1516686626.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:27.126Z,1516686627.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:27.578Z,1516686627.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:27.933Z,1516686627.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:28.341Z,1516686628.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:28.734Z,1516686628.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:29.146Z,1516686629.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:29.537Z,1516686629.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:29.968Z,1516686629.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:30.364Z,1516686630.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:30.761Z,1516686630.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:31.157Z,1516686631.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:31.604Z,1516686631.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:31.976Z,1516686631.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:32.362Z,1516686632.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:32.778Z,1516686632.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:33.171Z,1516686633.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:33.525Z,1516686633.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:33.964Z,1516686633.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:34.339Z,1516686634.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:34.737Z,1516686634.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:35.177Z,1516686635.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:35.576Z,1516686635.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:35.925Z,1516686635.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:36.327Z,1516686636.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:36.734Z,1516686636.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:37.134Z,1516686637.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:40.240Z,1516686640.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:40.376Z,1516686640.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:40.731Z,1516686640.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:41.136Z,1516686641.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:41.531Z,1516686641.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:41.949Z,1516686641.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:42.345Z,1516686642.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:42.741Z,1516686642.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:43.133Z,1516686643.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:43.540Z,1516686643.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:43.934Z,1516686643.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:44.333Z,1516686644.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:44.742Z,1516686644.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:45.145Z,1516686645.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:45.543Z,1516686645.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:45.942Z,1516686645.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:46.337Z,1516686646.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:46.733Z,1516686646.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:47.125Z,1516686647.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:47.533Z,1516686647.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:47.938Z,1516686647.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:48.337Z,1516686648.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:48.745Z,1516686648.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:49.133Z,1516686649.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:49.524Z,1516686649.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:49.991Z,1516686649.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:50.337Z,1516686650.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:50.742Z,1516686650.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:51.134Z,1516686651.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:51.538Z,1516686651.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:51.942Z,1516686651.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:52.322Z,1516686652.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:52.804Z,1516686652.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:53.144Z,1516686653.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:53.533Z,1516686653.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:53.953Z,1516686653.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:54.347Z,1516686654.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:54.743Z,1516686654.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:55.143Z,1516686655.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:55.533Z,1516686655.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:55.935Z,1516686655.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:56.344Z,1516686656.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:56.744Z,1516686656.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:57.146Z,1516686657.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:57.544Z,1516686657.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:57.940Z,1516686657.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:58.340Z,1516686658.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:58.745Z,1516686658.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:59.135Z,1516686659.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:59.537Z,1516686659.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:50:59.943Z,1516686659.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:00.349Z,1516686660.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:00.743Z,1516686660.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:01.137Z,1516686661.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:01.540Z,1516686661.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:01.938Z,1516686661.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:02.339Z,1516686662.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:02.753Z,1516686662.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:03.143Z,1516686663.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:03.543Z,1516686663.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:03.942Z,1516686663.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:04.333Z,1516686664.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:04.741Z,1516686664.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:05.140Z,1516686665.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:05.541Z,1516686665.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:05.942Z,1516686665.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:06.346Z,1516686666.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:06.750Z,1516686666.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:07.141Z,1516686667.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:07.545Z,1516686667.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:07.943Z,1516686667.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:08.343Z,1516686668.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:08.761Z,1516686668.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:09.151Z,1516686669.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:09.552Z,1516686669.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:09.947Z,1516686669.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:10.321Z,1516686670.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:10.321Z,1516686670.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-01-23T05:51:10.321Z,1516686670.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:51:10.323Z,1516686670.323 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:10.323Z,1516686670.323 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-01-23T05:51:10.323Z,1516686670.323 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:51:10.325Z,1516686670.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:10.325Z,1516686670.325 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52 2018-01-23T05:51:10.325Z,1516686670.325 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:51:10.353Z,1516686670.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:51:10.353Z,1516686670.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:51:10.354Z,1516686670.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:51:10.757Z,1516686670.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:51:10.757Z,1516686670.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-01-23T05:51:10.758Z,1516686670.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:51:10.758Z,1516686670.758 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-01-23T05:51:10.758Z,1516686670.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:51:10.758Z,1516686670.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52 2018-01-23T05:51:11.131Z,1516686671.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:51:11.131Z,1516686671.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:51:11.132Z,1516686671.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:51:11.132Z,1516686671.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:51:11.133Z,1516686671.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:51:11.133Z,1516686671.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:51:11.133Z,1516686671.133 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:51:11.134Z,1516686671.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:51:11.134Z,1516686671.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:51:11.530Z,1516686671.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:51:11.532Z,1516686671.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:11.938Z,1516686671.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:51:11.951Z,1516686671.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:12.363Z,1516686672.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:51:12.364Z,1516686672.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:12.761Z,1516686672.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:51:12.762Z,1516686672.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:13.136Z,1516686673.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:51:13.137Z,1516686673.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:13.531Z,1516686673.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:51:13.532Z,1516686673.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:13.932Z,1516686673.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:51:13.933Z,1516686673.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:14.331Z,1516686674.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:51:14.332Z,1516686674.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:14.740Z,1516686674.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:51:14.741Z,1516686674.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:15.134Z,1516686675.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:51:15.135Z,1516686675.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:15.534Z,1516686675.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:51:15.535Z,1516686675.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:15.932Z,1516686675.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:51:15.933Z,1516686675.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:16.330Z,1516686676.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:51:16.331Z,1516686676.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:16.739Z,1516686676.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:51:16.740Z,1516686676.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:17.135Z,1516686677.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:51:17.136Z,1516686677.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:17.531Z,1516686677.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:51:17.532Z,1516686677.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:17.940Z,1516686677.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:51:17.941Z,1516686677.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:18.348Z,1516686678.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:51:18.349Z,1516686678.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:18.738Z,1516686678.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:51:18.739Z,1516686678.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:19.130Z,1516686679.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:51:19.132Z,1516686679.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:19.532Z,1516686679.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:51:19.533Z,1516686679.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:19.932Z,1516686679.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:51:19.933Z,1516686679.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:20.330Z,1516686680.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:51:20.332Z,1516686680.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:20.737Z,1516686680.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:51:20.738Z,1516686680.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:21.138Z,1516686681.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:51:21.139Z,1516686681.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:21.540Z,1516686681.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:51:21.541Z,1516686681.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:21.932Z,1516686681.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:51:21.933Z,1516686681.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:22.331Z,1516686682.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:51:22.332Z,1516686682.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:22.730Z,1516686682.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:51:22.732Z,1516686682.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:23.136Z,1516686683.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:51:23.136Z,1516686683.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:23.540Z,1516686683.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:51:23.541Z,1516686683.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:23.944Z,1516686683.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:51:23.945Z,1516686683.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:24.342Z,1516686684.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:51:24.343Z,1516686684.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:24.744Z,1516686684.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:51:24.745Z,1516686684.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:25.140Z,1516686685.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:51:25.141Z,1516686685.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:25.532Z,1516686685.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:51:25.533Z,1516686685.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:25.934Z,1516686685.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:51:25.935Z,1516686685.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:26.339Z,1516686686.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:51:26.340Z,1516686686.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:26.742Z,1516686686.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:51:26.744Z,1516686686.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:27.140Z,1516686687.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:51:27.141Z,1516686687.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:27.542Z,1516686687.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:51:27.543Z,1516686687.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:27.940Z,1516686687.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:51:27.941Z,1516686687.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:28.336Z,1516686688.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:51:28.337Z,1516686688.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:28.740Z,1516686688.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:51:28.741Z,1516686688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:29.137Z,1516686689.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:51:29.138Z,1516686689.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:29.534Z,1516686689.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:51:29.535Z,1516686689.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:29.946Z,1516686689.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:51:29.955Z,1516686689.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:30.353Z,1516686690.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:30.746Z,1516686690.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:31.139Z,1516686691.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:31.538Z,1516686691.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:31.945Z,1516686691.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:32.340Z,1516686692.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:32.750Z,1516686692.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:33.150Z,1516686693.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:33.557Z,1516686693.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:33.944Z,1516686693.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:34.325Z,1516686694.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:34.754Z,1516686694.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:35.129Z,1516686695.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:35.561Z,1516686695.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:35.957Z,1516686695.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:36.368Z,1516686696.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:36.754Z,1516686696.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:37.133Z,1516686697.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:40.231Z,1516686700.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:40.372Z,1516686700.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:40.718Z,1516686700.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:41.121Z,1516686701.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:41.514Z,1516686701.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:41.916Z,1516686701.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:42.295Z,1516686702.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:42.702Z,1516686702.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:43.126Z,1516686703.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:43.502Z,1516686703.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:43.893Z,1516686703.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:44.292Z,1516686704.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:44.702Z,1516686704.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:45.106Z,1516686705.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:45.510Z,1516686705.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:45.896Z,1516686705.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:46.294Z,1516686706.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:46.709Z,1516686706.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:47.104Z,1516686707.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:47.504Z,1516686707.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:47.905Z,1516686707.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:48.299Z,1516686708.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:48.706Z,1516686708.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:49.102Z,1516686709.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:49.501Z,1516686709.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:49.905Z,1516686709.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:50.295Z,1516686710.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:50.708Z,1516686710.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:51.106Z,1516686711.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:51.505Z,1516686711.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:51.897Z,1516686711.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:52.305Z,1516686712.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:52.705Z,1516686712.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:53.104Z,1516686713.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:53.502Z,1516686713.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:53.897Z,1516686713.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:54.300Z,1516686714.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:54.703Z,1516686714.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:55.109Z,1516686715.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:55.502Z,1516686715.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:55.897Z,1516686715.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:56.294Z,1516686716.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:56.708Z,1516686716.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:57.106Z,1516686717.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:57.505Z,1516686717.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:57.899Z,1516686717.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:58.294Z,1516686718.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:58.705Z,1516686718.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:59.101Z,1516686719.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:59.502Z,1516686719.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:51:59.897Z,1516686719.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:00.295Z,1516686720.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:00.705Z,1516686720.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:01.102Z,1516686721.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:01.501Z,1516686721.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:01.900Z,1516686721.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:02.295Z,1516686722.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:02.708Z,1516686722.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:03.106Z,1516686723.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:03.505Z,1516686723.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:03.902Z,1516686723.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:04.298Z,1516686724.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:04.702Z,1516686724.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:05.103Z,1516686725.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:05.509Z,1516686725.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:05.897Z,1516686725.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:06.298Z,1516686726.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:06.702Z,1516686726.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:07.114Z,1516686727.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:07.512Z,1516686727.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:07.903Z,1516686727.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:08.298Z,1516686728.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:08.709Z,1516686728.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:09.107Z,1516686729.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:09.512Z,1516686729.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:09.902Z,1516686729.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:10.296Z,1516686730.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:10.713Z,1516686730.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:11.106Z,1516686731.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:11.506Z,1516686731.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:11.905Z,1516686731.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:12.296Z,1516686732.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:12.708Z,1516686732.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:13.109Z,1516686733.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:13.507Z,1516686733.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:13.909Z,1516686733.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:14.300Z,1516686734.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:14.712Z,1516686734.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:15.106Z,1516686735.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:15.505Z,1516686735.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:15.901Z,1516686735.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:16.295Z,1516686736.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:16.696Z,1516686736.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:17.112Z,1516686737.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:17.506Z,1516686737.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:17.913Z,1516686737.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:18.296Z,1516686738.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:18.701Z,1516686738.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:19.104Z,1516686739.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:19.499Z,1516686739.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:19.917Z,1516686739.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:20.313Z,1516686740.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:20.709Z,1516686740.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:21.097Z,1516686741.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:21.503Z,1516686741.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:21.906Z,1516686741.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:22.298Z,1516686742.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:22.701Z,1516686742.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:23.117Z,1516686743.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:23.510Z,1516686743.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:23.913Z,1516686743.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:24.304Z,1516686744.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:24.701Z,1516686744.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:25.104Z,1516686745.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:25.509Z,1516686745.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:25.909Z,1516686745.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:26.311Z,1516686746.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:26.716Z,1516686746.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:27.085Z,1516686747.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:27.513Z,1516686747.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:27.891Z,1516686747.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:28.286Z,1516686748.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:28.713Z,1516686748.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:29.113Z,1516686749.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:29.517Z,1516686749.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:29.916Z,1516686749.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:30.316Z,1516686750.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:30.693Z,1516686750.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:31.096Z,1516686751.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:31.495Z,1516686751.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:31.921Z,1516686751.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:32.322Z,1516686752.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:32.720Z,1516686752.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:33.093Z,1516686753.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:33.497Z,1516686753.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:33.895Z,1516686753.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:34.293Z,1516686754.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:34.695Z,1516686754.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:35.101Z,1516686755.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:35.522Z,1516686755.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:35.902Z,1516686755.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:36.307Z,1516686756.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:36.701Z,1516686756.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:36.704Z,1516686756.704 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T05:52:36.704Z,1516686756.704 [Default:CheckIn:C.Wait] Stopped 2018-01-23T05:52:36.704Z,1516686756.704 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T05:52:36.704Z,1516686756.704 [Default:CheckIn:D] Running Loop=1 2018-01-23T05:52:37.101Z,1516686757.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:37.108Z,1516686757.108 [Default:CheckIn:D] Stopped 2018-01-23T05:52:37.108Z,1516686757.108 [Default:CheckIn:E] Running Loop=1 2018-01-23T05:52:37.497Z,1516686757.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:37.500Z,1516686757.500 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.750814 min 2018-01-23T05:52:37.500Z,1516686757.500 [Default:CheckIn:E] Stopped 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn] Stopped 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn](INFO): Running loop #16 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn] Running Loop=16 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T05:52:37.501Z,1516686757.501 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T05:52:40.600Z,1516686760.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:40.757Z,1516686760.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:41.093Z,1516686761.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:41.487Z,1516686761.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:41.888Z,1516686761.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:42.265Z,1516686762.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:42.667Z,1516686762.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:43.099Z,1516686763.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:43.500Z,1516686763.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:43.876Z,1516686763.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:44.267Z,1516686764.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:44.673Z,1516686764.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:45.069Z,1516686765.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:45.467Z,1516686765.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:45.871Z,1516686765.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:46.274Z,1516686766.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:46.674Z,1516686766.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:47.069Z,1516686767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:47.468Z,1516686767.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:47.873Z,1516686767.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:48.269Z,1516686768.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:48.667Z,1516686768.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:49.071Z,1516686769.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:49.474Z,1516686769.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:49.876Z,1516686769.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:50.269Z,1516686770.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:50.669Z,1516686770.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:51.068Z,1516686771.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:51.466Z,1516686771.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:51.870Z,1516686771.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:52.273Z,1516686772.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:52.670Z,1516686772.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:53.066Z,1516686773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:53.466Z,1516686773.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:53.865Z,1516686773.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:54.268Z,1516686774.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:54.666Z,1516686774.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:55.070Z,1516686775.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:55.474Z,1516686775.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:55.901Z,1516686775.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:56.264Z,1516686776.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:56.667Z,1516686776.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:57.068Z,1516686777.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:57.466Z,1516686777.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:57.877Z,1516686777.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:58.277Z,1516686778.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:58.674Z,1516686778.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:59.071Z,1516686779.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:59.467Z,1516686779.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:52:59.866Z,1516686779.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:00.269Z,1516686780.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:00.667Z,1516686780.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:01.077Z,1516686781.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:01.478Z,1516686781.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:01.880Z,1516686781.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:02.265Z,1516686782.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:02.673Z,1516686782.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:03.071Z,1516686783.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:03.466Z,1516686783.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:03.877Z,1516686783.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:04.277Z,1516686784.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:04.674Z,1516686784.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:05.077Z,1516686785.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:05.471Z,1516686785.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:05.867Z,1516686785.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:06.273Z,1516686786.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:06.668Z,1516686786.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:07.077Z,1516686787.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:07.478Z,1516686787.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:07.873Z,1516686787.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:08.267Z,1516686788.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:08.673Z,1516686788.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:09.071Z,1516686789.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:09.465Z,1516686789.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:09.877Z,1516686789.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:10.277Z,1516686790.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:10.677Z,1516686790.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:11.072Z,1516686791.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:11.468Z,1516686791.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:11.867Z,1516686791.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:12.269Z,1516686792.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:12.672Z,1516686792.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:13.077Z,1516686793.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:13.478Z,1516686793.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:13.880Z,1516686793.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:14.268Z,1516686794.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:14.673Z,1516686794.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:15.072Z,1516686795.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:15.496Z,1516686795.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:15.896Z,1516686795.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:16.277Z,1516686796.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:16.674Z,1516686796.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:17.068Z,1516686797.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:17.473Z,1516686797.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:17.881Z,1516686797.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:18.270Z,1516686798.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:18.669Z,1516686798.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:19.075Z,1516686799.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:19.502Z,1516686799.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:19.874Z,1516686799.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:20.268Z,1516686800.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:20.686Z,1516686800.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:21.077Z,1516686801.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:21.472Z,1516686801.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:21.878Z,1516686801.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:22.277Z,1516686802.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:22.678Z,1516686802.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:23.076Z,1516686803.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:23.471Z,1516686803.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:23.876Z,1516686803.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:24.273Z,1516686804.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:24.673Z,1516686804.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:25.091Z,1516686805.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:25.489Z,1516686805.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:25.890Z,1516686805.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:26.274Z,1516686806.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:26.681Z,1516686806.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:27.079Z,1516686807.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:27.472Z,1516686807.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:27.888Z,1516686807.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:28.292Z,1516686808.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:28.685Z,1516686808.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:29.085Z,1516686809.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:29.481Z,1516686809.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:29.889Z,1516686809.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:30.287Z,1516686810.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:30.682Z,1516686810.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:31.078Z,1516686811.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:31.483Z,1516686811.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:31.889Z,1516686811.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:32.286Z,1516686812.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:32.691Z,1516686812.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:33.084Z,1516686813.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:33.488Z,1516686813.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:33.874Z,1516686813.874 [PNI_TCM](ERROR): CRC does not match. Expected:0x26478 got:0x17072 2018-01-23T05:53:33.901Z,1516686813.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:34.287Z,1516686814.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:34.686Z,1516686814.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:35.088Z,1516686815.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:35.455Z,1516686815.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x48962 got:0x24953 2018-01-23T05:53:35.488Z,1516686815.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:35.886Z,1516686815.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:36.294Z,1516686816.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:36.683Z,1516686816.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:37.076Z,1516686817.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:37.486Z,1516686817.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:37.896Z,1516686817.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:40.989Z,1516686820.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:41.101Z,1516686821.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:41.480Z,1516686821.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:41.863Z,1516686821.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:42.258Z,1516686822.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:42.660Z,1516686822.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:43.086Z,1516686823.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:43.469Z,1516686823.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:43.864Z,1516686823.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:44.258Z,1516686824.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:44.685Z,1516686824.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:45.058Z,1516686825.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:45.460Z,1516686825.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:45.864Z,1516686825.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:46.286Z,1516686826.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:46.697Z,1516686826.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:47.085Z,1516686827.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:47.450Z,1516686827.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x41996 got:0x3935 2018-01-23T05:53:47.492Z,1516686827.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:47.888Z,1516686827.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:48.268Z,1516686828.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:48.666Z,1516686828.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:49.060Z,1516686829.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:49.473Z,1516686829.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:49.894Z,1516686829.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:50.272Z,1516686830.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:50.667Z,1516686830.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:51.088Z,1516686831.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:51.470Z,1516686831.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:51.869Z,1516686831.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:52.269Z,1516686832.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:52.690Z,1516686832.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:53.055Z,1516686833.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:53.457Z,1516686833.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:53.861Z,1516686833.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:54.266Z,1516686834.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:54.669Z,1516686834.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:55.069Z,1516686835.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:55.455Z,1516686835.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:55.857Z,1516686835.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:56.257Z,1516686836.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:56.658Z,1516686836.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:57.069Z,1516686837.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:57.467Z,1516686837.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:57.867Z,1516686837.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:58.257Z,1516686838.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:58.656Z,1516686838.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:59.064Z,1516686839.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:59.458Z,1516686839.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:53:59.857Z,1516686839.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:00.279Z,1516686840.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:00.677Z,1516686840.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:01.073Z,1516686841.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:01.465Z,1516686841.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:01.858Z,1516686841.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:02.269Z,1516686842.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:02.670Z,1516686842.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:03.068Z,1516686843.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:03.476Z,1516686843.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:03.872Z,1516686843.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:04.265Z,1516686844.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:04.670Z,1516686844.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:05.058Z,1516686845.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:05.465Z,1516686845.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:05.864Z,1516686845.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:06.269Z,1516686846.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:06.676Z,1516686846.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:07.071Z,1516686847.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:07.453Z,1516686847.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:07.869Z,1516686847.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:08.270Z,1516686848.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:08.680Z,1516686848.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:09.068Z,1516686849.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:09.487Z,1516686849.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:09.874Z,1516686849.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:10.273Z,1516686850.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:10.675Z,1516686850.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:11.050Z,1516686851.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:11.456Z,1516686851.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:11.456Z,1516686851.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-01-23T05:54:11.456Z,1516686851.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:54:11.458Z,1516686851.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:11.458Z,1516686851.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-01-23T05:54:11.458Z,1516686851.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:54:11.460Z,1516686851.460 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:11.460Z,1516686851.460 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53 2018-01-23T05:54:11.460Z,1516686851.460 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:54:11.488Z,1516686851.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:54:11.488Z,1516686851.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:54:11.488Z,1516686851.488 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:54:11.865Z,1516686851.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:54:11.866Z,1516686851.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-01-23T05:54:11.866Z,1516686851.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:54:11.866Z,1516686851.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-01-23T05:54:11.867Z,1516686851.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:54:11.867Z,1516686851.867 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53 2018-01-23T05:54:12.264Z,1516686852.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:54:12.265Z,1516686852.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:54:12.265Z,1516686852.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:54:12.265Z,1516686852.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:54:12.266Z,1516686852.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:54:12.266Z,1516686852.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:54:12.266Z,1516686852.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:54:12.267Z,1516686852.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:54:12.267Z,1516686852.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:54:12.669Z,1516686852.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:54:12.669Z,1516686852.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:13.076Z,1516686853.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:54:13.077Z,1516686853.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:13.463Z,1516686853.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:54:13.464Z,1516686853.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:13.868Z,1516686853.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:54:13.869Z,1516686853.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:14.259Z,1516686854.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:54:14.260Z,1516686854.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:14.660Z,1516686854.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:54:14.661Z,1516686854.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:15.076Z,1516686855.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:54:15.077Z,1516686855.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:15.470Z,1516686855.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:54:15.471Z,1516686855.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:15.484Z,1516686855.484 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T05:54:15.866Z,1516686855.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:54:15.867Z,1516686855.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:16.263Z,1516686856.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:54:16.264Z,1516686856.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:16.660Z,1516686856.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:54:16.661Z,1516686856.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:17.057Z,1516686857.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:54:17.058Z,1516686857.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:17.462Z,1516686857.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:54:17.464Z,1516686857.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:17.869Z,1516686857.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:54:17.869Z,1516686857.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:18.266Z,1516686858.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:54:18.267Z,1516686858.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:18.670Z,1516686858.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:54:18.672Z,1516686858.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:19.076Z,1516686859.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:54:19.077Z,1516686859.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:19.453Z,1516686859.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:54:19.454Z,1516686859.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:19.867Z,1516686859.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:54:19.868Z,1516686859.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:20.269Z,1516686860.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:54:20.270Z,1516686860.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:20.666Z,1516686860.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:54:20.667Z,1516686860.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:21.075Z,1516686861.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:54:21.076Z,1516686861.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:21.471Z,1516686861.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:54:21.472Z,1516686861.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:21.875Z,1516686861.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:54:21.876Z,1516686861.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:22.268Z,1516686862.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:54:22.269Z,1516686862.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:22.669Z,1516686862.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:54:22.670Z,1516686862.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:23.067Z,1516686863.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:54:23.068Z,1516686863.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:23.464Z,1516686863.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:54:23.464Z,1516686863.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:23.873Z,1516686863.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:54:23.874Z,1516686863.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:24.267Z,1516686864.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:54:24.268Z,1516686864.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:24.681Z,1516686864.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:54:24.682Z,1516686864.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:25.070Z,1516686865.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:54:25.071Z,1516686865.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:25.445Z,1516686865.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:54:25.446Z,1516686865.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:25.848Z,1516686865.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:54:25.849Z,1516686865.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:26.276Z,1516686866.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:54:26.277Z,1516686866.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:26.652Z,1516686866.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:54:26.653Z,1516686866.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:27.062Z,1516686867.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:54:27.075Z,1516686867.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:27.466Z,1516686867.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:54:27.479Z,1516686867.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:27.858Z,1516686867.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:54:27.859Z,1516686867.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:28.254Z,1516686868.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:54:28.255Z,1516686868.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:28.668Z,1516686868.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:54:28.669Z,1516686868.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:29.054Z,1516686869.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:54:29.055Z,1516686869.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:29.458Z,1516686869.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:54:29.460Z,1516686869.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:29.857Z,1516686869.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:54:29.858Z,1516686869.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:30.265Z,1516686870.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:54:30.266Z,1516686870.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:30.669Z,1516686870.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:54:30.670Z,1516686870.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:31.066Z,1516686871.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:54:31.067Z,1516686871.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:31.457Z,1516686871.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:31.867Z,1516686871.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:32.262Z,1516686872.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:32.661Z,1516686872.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:33.066Z,1516686873.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:33.479Z,1516686873.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:33.873Z,1516686873.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:34.266Z,1516686874.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:34.673Z,1516686874.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:35.062Z,1516686875.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:35.460Z,1516686875.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:35.871Z,1516686875.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:36.277Z,1516686876.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:36.671Z,1516686876.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:37.078Z,1516686877.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:37.469Z,1516686877.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:37.853Z,1516686877.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:38.257Z,1516686878.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:41.361Z,1516686881.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:41.526Z,1516686881.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:41.879Z,1516686881.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:42.289Z,1516686882.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:42.656Z,1516686882.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:43.055Z,1516686883.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:43.458Z,1516686883.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:43.856Z,1516686883.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:44.291Z,1516686884.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:44.666Z,1516686884.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:45.067Z,1516686885.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:45.464Z,1516686885.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:45.859Z,1516686885.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:46.267Z,1516686886.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:46.668Z,1516686886.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:47.070Z,1516686887.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:47.473Z,1516686887.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:47.869Z,1516686887.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:48.260Z,1516686888.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:48.654Z,1516686888.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:49.055Z,1516686889.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:49.461Z,1516686889.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:49.857Z,1516686889.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:50.265Z,1516686890.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:50.670Z,1516686890.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:51.065Z,1516686891.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:51.455Z,1516686891.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:51.858Z,1516686891.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:52.257Z,1516686892.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:52.660Z,1516686892.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:53.069Z,1516686893.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:53.473Z,1516686893.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:53.865Z,1516686893.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:54.264Z,1516686894.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:54.661Z,1516686894.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:55.055Z,1516686895.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:55.457Z,1516686895.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:55.865Z,1516686895.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:56.268Z,1516686896.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:56.669Z,1516686896.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:57.073Z,1516686897.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:57.459Z,1516686897.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:57.860Z,1516686897.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:58.257Z,1516686898.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:58.660Z,1516686898.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:59.069Z,1516686899.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:59.473Z,1516686899.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:54:59.868Z,1516686899.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:00.256Z,1516686900.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:00.668Z,1516686900.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:01.055Z,1516686901.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:01.457Z,1516686901.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:01.866Z,1516686901.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:02.266Z,1516686902.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:02.669Z,1516686902.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:03.065Z,1516686903.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:03.455Z,1516686903.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:03.860Z,1516686903.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:04.264Z,1516686904.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:04.655Z,1516686904.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:05.077Z,1516686905.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:05.473Z,1516686905.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:05.872Z,1516686905.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:06.265Z,1516686906.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:06.668Z,1516686906.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:07.055Z,1516686907.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:07.457Z,1516686907.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:07.857Z,1516686907.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:08.265Z,1516686908.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:08.670Z,1516686908.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:09.065Z,1516686909.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:09.455Z,1516686909.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:09.860Z,1516686909.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:10.258Z,1516686910.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:10.660Z,1516686910.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:11.070Z,1516686911.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:11.469Z,1516686911.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:11.872Z,1516686911.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:12.261Z,1516686912.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:12.656Z,1516686912.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:13.064Z,1516686913.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:13.462Z,1516686913.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:13.869Z,1516686913.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:14.266Z,1516686914.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:14.671Z,1516686914.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:15.066Z,1516686915.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:15.457Z,1516686915.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:15.857Z,1516686915.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:16.258Z,1516686916.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:16.664Z,1516686916.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:17.074Z,1516686917.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:17.470Z,1516686917.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:17.864Z,1516686917.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:18.268Z,1516686918.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:18.664Z,1516686918.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:19.069Z,1516686919.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:19.465Z,1516686919.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:19.868Z,1516686919.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:20.288Z,1516686920.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:20.681Z,1516686920.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:21.069Z,1516686921.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:21.471Z,1516686921.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:21.870Z,1516686921.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:22.268Z,1516686922.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:22.647Z,1516686922.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:23.066Z,1516686923.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:23.476Z,1516686923.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:23.883Z,1516686923.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:24.250Z,1516686924.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:24.681Z,1516686924.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:25.063Z,1516686925.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:25.457Z,1516686925.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:25.856Z,1516686925.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:26.310Z,1516686926.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:26.664Z,1516686926.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:27.077Z,1516686927.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:27.473Z,1516686927.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:27.883Z,1516686927.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:28.258Z,1516686928.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:28.704Z,1516686928.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:29.081Z,1516686929.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:29.466Z,1516686929.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:29.873Z,1516686929.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:30.284Z,1516686930.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:30.666Z,1516686930.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:31.092Z,1516686931.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:31.466Z,1516686931.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:31.877Z,1516686931.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:32.323Z,1516686932.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:32.685Z,1516686932.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:33.107Z,1516686933.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:33.520Z,1516686933.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:33.877Z,1516686933.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:34.289Z,1516686934.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:34.685Z,1516686934.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:35.073Z,1516686935.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:35.501Z,1516686935.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:35.896Z,1516686935.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:36.265Z,1516686936.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:36.669Z,1516686936.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:37.072Z,1516686937.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:37.466Z,1516686937.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:37.865Z,1516686937.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:38.256Z,1516686938.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:38.657Z,1516686938.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:41.769Z,1516686941.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:41.925Z,1516686941.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:42.282Z,1516686942.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:42.671Z,1516686942.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:43.063Z,1516686943.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:43.476Z,1516686943.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:43.868Z,1516686943.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:44.272Z,1516686944.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:44.672Z,1516686944.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:45.081Z,1516686945.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:45.467Z,1516686945.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:45.868Z,1516686945.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:46.269Z,1516686946.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:46.663Z,1516686946.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:47.080Z,1516686947.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:47.474Z,1516686947.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:47.872Z,1516686947.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:48.274Z,1516686948.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:48.664Z,1516686948.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:49.081Z,1516686949.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:49.484Z,1516686949.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:49.877Z,1516686949.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:50.268Z,1516686950.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:50.672Z,1516686950.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:51.077Z,1516686951.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:51.477Z,1516686951.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:51.880Z,1516686951.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:52.269Z,1516686952.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:52.665Z,1516686952.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:53.080Z,1516686953.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:53.485Z,1516686953.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:53.878Z,1516686953.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:54.265Z,1516686954.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:54.653Z,1516686954.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:54.668Z,1516686954.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:55.060Z,1516686955.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:55.075Z,1516686955.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:55.464Z,1516686955.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:55.485Z,1516686955.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:55.863Z,1516686955.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:55.877Z,1516686955.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:56.250Z,1516686956.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:56.264Z,1516686956.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:56.651Z,1516686956.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:56.665Z,1516686956.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:57.059Z,1516686957.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:57.074Z,1516686957.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:57.463Z,1516686957.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:57.477Z,1516686957.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:57.861Z,1516686957.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:57.875Z,1516686957.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:58.250Z,1516686958.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:58.270Z,1516686958.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:58.649Z,1516686958.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:58.664Z,1516686958.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:59.061Z,1516686959.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:59.075Z,1516686959.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:59.464Z,1516686959.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:59.478Z,1516686959.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:55:59.860Z,1516686959.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:55:59.874Z,1516686959.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:00.251Z,1516686960.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:00.266Z,1516686960.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:00.650Z,1516686960.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:00.669Z,1516686960.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:01.060Z,1516686961.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:01.075Z,1516686961.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:01.463Z,1516686961.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:01.478Z,1516686961.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:01.860Z,1516686961.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:01.874Z,1516686961.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:02.251Z,1516686962.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:02.265Z,1516686962.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:02.650Z,1516686962.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:02.668Z,1516686962.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:03.060Z,1516686963.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:03.074Z,1516686963.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:03.463Z,1516686963.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:03.477Z,1516686963.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:03.860Z,1516686963.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:03.880Z,1516686963.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:04.255Z,1516686964.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:04.269Z,1516686964.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:04.650Z,1516686964.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:04.665Z,1516686964.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:05.061Z,1516686965.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:05.075Z,1516686965.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:05.464Z,1516686965.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:05.478Z,1516686965.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:05.859Z,1516686965.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:05.874Z,1516686965.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:06.241Z,1516686966.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:06.276Z,1516686966.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:06.654Z,1516686966.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:06.669Z,1516686966.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:07.041Z,1516686967.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:07.073Z,1516686967.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:07.457Z,1516686967.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:07.477Z,1516686967.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:07.864Z,1516686967.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:07.878Z,1516686967.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:08.259Z,1516686968.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:08.273Z,1516686968.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:08.641Z,1516686968.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:08.667Z,1516686968.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:09.039Z,1516686969.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:09.070Z,1516686969.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:09.442Z,1516686969.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:09.473Z,1516686969.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:09.841Z,1516686969.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:09.875Z,1516686969.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:10.257Z,1516686970.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:10.283Z,1516686970.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:10.668Z,1516686970.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:10.682Z,1516686970.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:11.060Z,1516686971.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:11.080Z,1516686971.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:11.439Z,1516686971.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:11.465Z,1516686971.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:11.843Z,1516686971.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:11.857Z,1516686971.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:12.243Z,1516686972.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:12.264Z,1516686972.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:12.644Z,1516686972.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:12.658Z,1516686972.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:13.041Z,1516686973.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:13.061Z,1516686973.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:13.456Z,1516686973.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:13.470Z,1516686973.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:13.860Z,1516686973.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:13.881Z,1516686973.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:14.256Z,1516686974.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:14.277Z,1516686974.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:14.643Z,1516686974.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:14.664Z,1516686974.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:15.039Z,1516686975.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:15.054Z,1516686975.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:15.443Z,1516686975.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:15.458Z,1516686975.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:15.841Z,1516686975.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:15.855Z,1516686975.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:16.252Z,1516686976.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:16.267Z,1516686976.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:16.680Z,1516686976.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:16.760Z,1516686976.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:17.056Z,1516686977.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:17.076Z,1516686977.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:17.439Z,1516686977.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:17.453Z,1516686977.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:17.846Z,1516686977.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:17.873Z,1516686977.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:18.242Z,1516686978.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:18.263Z,1516686978.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:18.646Z,1516686978.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:18.661Z,1516686978.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:19.049Z,1516686979.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:19.063Z,1516686979.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:19.456Z,1516686979.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:19.470Z,1516686979.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:19.860Z,1516686979.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:19.874Z,1516686979.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:20.252Z,1516686980.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:20.267Z,1516686980.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:20.648Z,1516686980.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:20.662Z,1516686980.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:21.049Z,1516686981.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:21.063Z,1516686981.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:21.447Z,1516686981.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:21.473Z,1516686981.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:21.853Z,1516686981.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:21.867Z,1516686981.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:22.273Z,1516686982.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:22.677Z,1516686982.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:23.070Z,1516686983.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:23.464Z,1516686983.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:23.863Z,1516686983.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:24.264Z,1516686984.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:24.664Z,1516686984.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:25.071Z,1516686985.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:25.474Z,1516686985.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:25.860Z,1516686985.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:25.874Z,1516686985.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:26.260Z,1516686986.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:26.274Z,1516686986.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:26.645Z,1516686986.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:26.673Z,1516686986.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:27.039Z,1516686987.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:27.062Z,1516686987.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:27.442Z,1516686987.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:27.473Z,1516686987.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:27.845Z,1516686987.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:27.881Z,1516686987.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:28.252Z,1516686988.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:28.281Z,1516686988.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:28.676Z,1516686988.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:28.691Z,1516686988.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:29.052Z,1516686989.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:29.079Z,1516686989.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:29.442Z,1516686989.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:29.481Z,1516686989.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:29.842Z,1516686989.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:29.861Z,1516686989.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:30.250Z,1516686990.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:30.285Z,1516686990.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:30.651Z,1516686990.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:30.666Z,1516686990.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:31.046Z,1516686991.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:31.066Z,1516686991.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:31.452Z,1516686991.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:31.468Z,1516686991.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:31.856Z,1516686991.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:31.896Z,1516686991.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:32.252Z,1516686992.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:32.267Z,1516686992.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:32.649Z,1516686992.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:32.672Z,1516686992.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:33.053Z,1516686993.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:33.068Z,1516686993.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:33.446Z,1516686993.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:33.468Z,1516686993.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:33.844Z,1516686993.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:33.876Z,1516686993.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:34.261Z,1516686994.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:34.275Z,1516686994.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:34.666Z,1516686994.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:34.690Z,1516686994.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:35.059Z,1516686995.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:35.082Z,1516686995.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:35.441Z,1516686995.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:35.477Z,1516686995.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:35.845Z,1516686995.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:35.871Z,1516686995.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:36.256Z,1516686996.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:36.276Z,1516686996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:36.643Z,1516686996.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:36.681Z,1516686996.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:37.046Z,1516686997.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:37.072Z,1516686997.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:37.456Z,1516686997.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:37.487Z,1516686997.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:37.870Z,1516686997.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:37.884Z,1516686997.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:38.252Z,1516686998.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:38.289Z,1516686998.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:38.646Z,1516686998.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:38.677Z,1516686998.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:41.739Z,1516687001.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:41.754Z,1516687001.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:41.852Z,1516687001.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:41.892Z,1516687001.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:42.239Z,1516687002.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:42.253Z,1516687002.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:42.644Z,1516687002.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:42.658Z,1516687002.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:43.036Z,1516687003.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:43.058Z,1516687003.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:43.424Z,1516687003.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:43.468Z,1516687003.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:43.847Z,1516687003.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:44.245Z,1516687004.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:44.651Z,1516687004.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:45.021Z,1516687005.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:45.060Z,1516687005.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:45.439Z,1516687005.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:45.457Z,1516687005.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:45.844Z,1516687005.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:56:45.858Z,1516687005.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:46.265Z,1516687006.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:46.653Z,1516687006.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:47.049Z,1516687007.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:47.447Z,1516687007.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:47.849Z,1516687007.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:48.254Z,1516687008.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:48.668Z,1516687008.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:49.064Z,1516687009.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:49.457Z,1516687009.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:49.847Z,1516687009.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:50.241Z,1516687010.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:50.653Z,1516687010.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:51.053Z,1516687011.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:51.457Z,1516687011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:51.859Z,1516687011.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:52.265Z,1516687012.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:52.651Z,1516687012.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:53.051Z,1516687013.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:53.457Z,1516687013.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:53.851Z,1516687013.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:54.254Z,1516687014.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:54.658Z,1516687014.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:55.057Z,1516687015.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:55.455Z,1516687015.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:55.853Z,1516687015.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:56.241Z,1516687016.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:56.652Z,1516687016.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:57.063Z,1516687017.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:57.456Z,1516687017.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:57.867Z,1516687017.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:58.265Z,1516687018.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:58.657Z,1516687018.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:59.041Z,1516687019.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:59.444Z,1516687019.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:56:59.837Z,1516687019.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:00.265Z,1516687020.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:00.671Z,1516687020.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:01.066Z,1516687021.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:01.441Z,1516687021.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:01.847Z,1516687021.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:02.241Z,1516687022.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:02.644Z,1516687022.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:03.043Z,1516687023.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:03.454Z,1516687023.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:03.850Z,1516687023.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:04.257Z,1516687024.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:04.641Z,1516687024.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:05.043Z,1516687025.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:05.445Z,1516687025.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:05.844Z,1516687025.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:06.247Z,1516687026.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:06.677Z,1516687026.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:07.047Z,1516687027.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:07.447Z,1516687027.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:07.848Z,1516687027.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:08.241Z,1516687028.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:08.643Z,1516687028.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:09.042Z,1516687029.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:09.446Z,1516687029.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:09.875Z,1516687029.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:10.257Z,1516687030.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:10.646Z,1516687030.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:11.049Z,1516687031.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:11.450Z,1516687031.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:11.848Z,1516687031.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:12.257Z,1516687032.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:12.654Z,1516687032.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:12.654Z,1516687032.654 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-01-23T05:57:12.654Z,1516687032.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T05:57:12.656Z,1516687032.656 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:12.656Z,1516687032.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-01-23T05:57:12.656Z,1516687032.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T05:57:12.658Z,1516687032.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:12.658Z,1516687032.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54 2018-01-23T05:57:12.658Z,1516687032.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T05:57:12.703Z,1516687032.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T05:57:12.704Z,1516687032.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T05:57:12.704Z,1516687032.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T05:57:13.077Z,1516687033.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T05:57:13.077Z,1516687033.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-01-23T05:57:13.078Z,1516687033.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T05:57:13.078Z,1516687033.078 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-01-23T05:57:13.078Z,1516687033.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T05:57:13.083Z,1516687033.083 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54 2018-01-23T05:57:13.464Z,1516687033.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T05:57:13.464Z,1516687033.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:57:13.464Z,1516687033.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:57:13.465Z,1516687033.465 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T05:57:13.465Z,1516687033.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:57:13.466Z,1516687033.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:57:13.466Z,1516687033.466 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T05:57:13.466Z,1516687033.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T05:57:13.467Z,1516687033.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T05:57:13.864Z,1516687033.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T05:57:13.865Z,1516687033.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:14.256Z,1516687034.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T05:57:14.257Z,1516687034.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:14.660Z,1516687034.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T05:57:14.661Z,1516687034.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:15.040Z,1516687035.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T05:57:15.041Z,1516687035.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:15.467Z,1516687035.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T05:57:15.468Z,1516687035.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:15.854Z,1516687035.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T05:57:15.871Z,1516687035.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:16.280Z,1516687036.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T05:57:16.281Z,1516687036.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:16.645Z,1516687036.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T05:57:16.646Z,1516687036.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:17.048Z,1516687037.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T05:57:17.049Z,1516687037.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:17.448Z,1516687037.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T05:57:17.449Z,1516687037.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:17.848Z,1516687037.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T05:57:17.849Z,1516687037.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:18.284Z,1516687038.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T05:57:18.285Z,1516687038.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:18.650Z,1516687038.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T05:57:18.651Z,1516687038.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:19.053Z,1516687039.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T05:57:19.054Z,1516687039.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:19.448Z,1516687039.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T05:57:19.449Z,1516687039.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:19.847Z,1516687039.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T05:57:19.848Z,1516687039.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:20.244Z,1516687040.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T05:57:20.245Z,1516687040.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:20.644Z,1516687040.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T05:57:20.645Z,1516687040.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:21.045Z,1516687041.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T05:57:21.046Z,1516687041.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:21.456Z,1516687041.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T05:57:21.457Z,1516687041.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:21.852Z,1516687041.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T05:57:21.853Z,1516687041.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:22.253Z,1516687042.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T05:57:22.254Z,1516687042.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:22.646Z,1516687042.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T05:57:22.647Z,1516687042.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:23.052Z,1516687043.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T05:57:23.053Z,1516687043.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:23.444Z,1516687043.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T05:57:23.445Z,1516687043.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:23.842Z,1516687043.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T05:57:23.843Z,1516687043.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:24.254Z,1516687044.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T05:57:24.259Z,1516687044.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:24.656Z,1516687044.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T05:57:24.657Z,1516687044.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:25.064Z,1516687045.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T05:57:25.065Z,1516687045.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:25.449Z,1516687045.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T05:57:25.450Z,1516687045.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:25.848Z,1516687045.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T05:57:25.849Z,1516687045.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:26.246Z,1516687046.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T05:57:26.247Z,1516687046.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:26.654Z,1516687046.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T05:57:26.655Z,1516687046.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:27.036Z,1516687047.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T05:57:27.037Z,1516687047.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:27.466Z,1516687047.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T05:57:27.468Z,1516687047.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:27.870Z,1516687047.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T05:57:27.871Z,1516687047.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:28.271Z,1516687048.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T05:57:28.272Z,1516687048.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:28.664Z,1516687048.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T05:57:28.665Z,1516687048.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:29.045Z,1516687049.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T05:57:29.046Z,1516687049.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:29.447Z,1516687049.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T05:57:29.448Z,1516687049.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:29.844Z,1516687049.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T05:57:29.844Z,1516687049.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:30.249Z,1516687050.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T05:57:30.250Z,1516687050.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:30.651Z,1516687050.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T05:57:30.651Z,1516687050.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:31.048Z,1516687051.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T05:57:31.049Z,1516687051.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:31.448Z,1516687051.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T05:57:31.449Z,1516687051.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:31.847Z,1516687051.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T05:57:31.848Z,1516687051.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:32.252Z,1516687052.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T05:57:32.253Z,1516687052.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:32.654Z,1516687052.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:33.080Z,1516687053.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:33.443Z,1516687053.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:33.845Z,1516687053.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:34.247Z,1516687054.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:34.646Z,1516687054.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:35.048Z,1516687055.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:35.456Z,1516687055.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:35.855Z,1516687055.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:36.250Z,1516687056.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:36.648Z,1516687056.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:37.048Z,1516687057.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:37.448Z,1516687057.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:37.853Z,1516687057.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:37.856Z,1516687057.856 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T05:52:37.5Z 2018-01-23T05:57:37.856Z,1516687057.856 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T05:57:37.856Z,1516687057.856 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T05:57:38.257Z,1516687058.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:38.774Z,1516687058.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:39.065Z,1516687059.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:42.152Z,1516687062.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:42.223Z,1516687062.223 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0064.lzma 2018-01-23T05:57:42.289Z,1516687062.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:42.650Z,1516687062.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:42.977Z,1516687062.977 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0064.lzma.bak 2018-01-23T05:57:42.977Z,1516687062.977 [DataOverHttps](INFO): SBD MOMSN=7755097 2018-01-23T05:57:43.055Z,1516687063.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:43.697Z,1516687063.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:43.843Z,1516687063.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:47.000Z,1516687067.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:47.121Z,1516687067.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:47.470Z,1516687067.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:47.898Z,1516687067.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:48.277Z,1516687068.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:48.674Z,1516687068.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:51.815Z,1516687071.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:51.895Z,1516687071.895 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0065.lzma 2018-01-23T05:57:51.943Z,1516687071.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:52.305Z,1516687072.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:52.645Z,1516687072.645 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0065.lzma.bak 2018-01-23T05:57:52.645Z,1516687072.645 [DataOverHttps](INFO): SBD MOMSN=7755099 2018-01-23T05:57:52.724Z,1516687072.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:53.318Z,1516687073.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:53.321Z,1516687073.321 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T05:57:53.321Z,1516687073.321 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T05:57:53.322Z,1516687073.322 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T05:57:53.505Z,1516687073.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:56.664Z,1516687076.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:56.769Z,1516687076.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:57.154Z,1516687077.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:57.560Z,1516687077.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:57.955Z,1516687077.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:58.333Z,1516687078.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:58.729Z,1516687078.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:59.127Z,1516687079.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:59.534Z,1516687079.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:57:59.933Z,1516687079.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:00.333Z,1516687080.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:00.726Z,1516687080.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:01.138Z,1516687081.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:01.531Z,1516687081.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:01.930Z,1516687081.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:02.331Z,1516687082.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:02.735Z,1516687082.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:03.132Z,1516687083.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:03.529Z,1516687083.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:03.927Z,1516687083.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:04.327Z,1516687084.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:04.728Z,1516687084.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:05.125Z,1516687085.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:05.488Z,1516687085.488 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T05:58:05.488Z,1516687085.488 [NAL9602] Data Fault, FailCount= 5 2018-01-23T05:58:05.488Z,1516687085.488 [NAL9602](ERROR): Data Fault 2018-01-23T05:58:05.536Z,1516687085.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:05.561Z,1516687085.561 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T05:58:05.561Z,1516687085.561 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T05:58:05.892Z,1516687085.892 [NAL9602](INFO): Powering down 2018-01-23T05:58:05.943Z,1516687085.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:05.954Z,1516687085.954 [CBIT](INFO): Critical error at 20180123T055805 2018-01-23T05:58:06.331Z,1516687086.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:06.737Z,1516687086.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:07.136Z,1516687087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:07.525Z,1516687087.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:07.938Z,1516687087.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:08.340Z,1516687088.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:08.743Z,1516687088.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:09.143Z,1516687089.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:09.522Z,1516687089.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:09.939Z,1516687089.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:10.318Z,1516687090.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:10.726Z,1516687090.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:11.116Z,1516687091.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:11.524Z,1516687091.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:11.923Z,1516687091.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:12.390Z,1516687092.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:12.723Z,1516687092.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:13.120Z,1516687093.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:13.519Z,1516687093.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:13.926Z,1516687093.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:14.352Z,1516687094.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:14.719Z,1516687094.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:15.195Z,1516687095.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:15.526Z,1516687095.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:15.920Z,1516687095.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:16.330Z,1516687096.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:16.726Z,1516687096.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:17.128Z,1516687097.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:17.523Z,1516687097.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:17.920Z,1516687097.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:18.323Z,1516687098.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:18.744Z,1516687098.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:19.127Z,1516687099.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:19.522Z,1516687099.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:19.930Z,1516687099.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:20.326Z,1516687100.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:20.725Z,1516687100.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:21.127Z,1516687101.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:21.525Z,1516687101.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:21.932Z,1516687101.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:22.329Z,1516687102.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:22.728Z,1516687102.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:23.122Z,1516687103.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:23.532Z,1516687103.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:23.934Z,1516687103.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:24.327Z,1516687104.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:24.728Z,1516687104.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:25.137Z,1516687105.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:25.528Z,1516687105.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:25.934Z,1516687105.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:26.328Z,1516687106.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:26.727Z,1516687106.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:27.128Z,1516687107.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:27.534Z,1516687107.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:27.933Z,1516687107.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:28.331Z,1516687108.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:28.739Z,1516687108.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:29.126Z,1516687109.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:29.539Z,1516687109.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:29.937Z,1516687109.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:30.331Z,1516687110.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:30.731Z,1516687110.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:31.145Z,1516687111.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:31.533Z,1516687111.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:31.936Z,1516687111.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:32.321Z,1516687112.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:32.335Z,1516687112.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:32.718Z,1516687112.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:32.732Z,1516687112.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:33.108Z,1516687113.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:33.140Z,1516687113.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:33.522Z,1516687113.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:33.528Z,1516687113.528 [PNI_TCM](ERROR): CRC does not match. Expected:0x11205 got:0x25737 2018-01-23T05:58:33.573Z,1516687113.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:33.919Z,1516687113.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:33.933Z,1516687113.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:34.306Z,1516687114.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:34.331Z,1516687114.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:34.705Z,1516687114.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:34.749Z,1516687114.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:35.119Z,1516687115.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:35.126Z,1516687115.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x57003 got:0x20765 2018-01-23T05:58:35.153Z,1516687115.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:35.515Z,1516687115.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:35.537Z,1516687115.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:35.932Z,1516687115.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:36.345Z,1516687116.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:36.727Z,1516687116.727 [PNI_TCM](ERROR): CRC does not match. Expected:0x59585 got:0x45151 2018-01-23T05:58:36.746Z,1516687116.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:37.116Z,1516687117.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:37.136Z,1516687117.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:37.507Z,1516687117.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:37.537Z,1516687117.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:37.904Z,1516687117.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:37.945Z,1516687117.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:38.302Z,1516687118.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:38.329Z,1516687118.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:38.707Z,1516687118.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:38.739Z,1516687118.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:39.115Z,1516687119.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:39.152Z,1516687119.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:39.503Z,1516687119.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:39.551Z,1516687119.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:39.905Z,1516687119.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:39.926Z,1516687119.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:40.320Z,1516687120.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:40.353Z,1516687120.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:40.716Z,1516687120.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:40.730Z,1516687120.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:41.113Z,1516687121.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:41.156Z,1516687121.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:41.518Z,1516687121.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:41.559Z,1516687121.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:41.911Z,1516687121.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:41.927Z,1516687121.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:42.313Z,1516687122.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:42.336Z,1516687122.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:42.712Z,1516687122.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:42.742Z,1516687122.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:43.128Z,1516687123.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:43.529Z,1516687123.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:43.927Z,1516687123.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:44.341Z,1516687124.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:44.733Z,1516687124.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:45.136Z,1516687125.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:45.539Z,1516687125.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:45.954Z,1516687125.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:46.328Z,1516687126.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:46.712Z,1516687126.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:46.729Z,1516687126.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:47.114Z,1516687127.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:47.129Z,1516687127.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:47.512Z,1516687127.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:47.556Z,1516687127.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:47.915Z,1516687127.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:47.932Z,1516687127.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:48.315Z,1516687128.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:48.333Z,1516687128.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:48.717Z,1516687128.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:48.731Z,1516687128.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:49.110Z,1516687129.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:49.133Z,1516687129.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:49.512Z,1516687129.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:49.526Z,1516687129.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:49.912Z,1516687129.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:49.933Z,1516687129.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:50.308Z,1516687130.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:50.326Z,1516687130.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:50.712Z,1516687130.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:50.726Z,1516687130.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:51.111Z,1516687131.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:51.129Z,1516687131.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:51.509Z,1516687131.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:51.526Z,1516687131.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:51.913Z,1516687131.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:51.930Z,1516687131.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:52.312Z,1516687132.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:52.360Z,1516687132.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:52.715Z,1516687132.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:52.729Z,1516687132.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:53.115Z,1516687133.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:53.134Z,1516687133.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:53.512Z,1516687133.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:53.530Z,1516687133.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:53.913Z,1516687133.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:53.927Z,1516687133.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:57.018Z,1516687137.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:57.033Z,1516687137.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:57.130Z,1516687137.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:57.168Z,1516687137.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:57.507Z,1516687137.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:57.533Z,1516687137.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:57.916Z,1516687137.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:57.930Z,1516687137.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:58.305Z,1516687138.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:58.320Z,1516687138.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:58.707Z,1516687138.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:58.733Z,1516687138.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:59.108Z,1516687139.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:59.122Z,1516687139.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:59.505Z,1516687139.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:59.523Z,1516687139.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:58:59.908Z,1516687139.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:58:59.932Z,1516687139.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:00.313Z,1516687140.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:00.327Z,1516687140.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:00.708Z,1516687140.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:00.722Z,1516687140.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:01.108Z,1516687141.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:01.128Z,1516687141.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:01.512Z,1516687141.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:01.527Z,1516687141.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:01.908Z,1516687141.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:01.922Z,1516687141.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:02.303Z,1516687142.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:02.327Z,1516687142.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:02.726Z,1516687142.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:03.121Z,1516687143.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:03.528Z,1516687143.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:03.927Z,1516687143.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:04.322Z,1516687144.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:04.723Z,1516687144.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:05.129Z,1516687145.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:05.520Z,1516687145.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:05.921Z,1516687145.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:06.329Z,1516687146.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:06.722Z,1516687146.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:07.124Z,1516687147.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:07.526Z,1516687147.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:07.923Z,1516687147.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:08.323Z,1516687148.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:08.728Z,1516687148.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:09.124Z,1516687149.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:09.527Z,1516687149.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:09.924Z,1516687149.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:10.325Z,1516687150.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:10.728Z,1516687150.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:11.128Z,1516687151.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:11.523Z,1516687151.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:11.925Z,1516687151.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:12.328Z,1516687152.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:12.723Z,1516687152.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:13.128Z,1516687153.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:13.513Z,1516687153.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:13.527Z,1516687153.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:13.908Z,1516687153.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:13.922Z,1516687153.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:14.309Z,1516687154.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:14.328Z,1516687154.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:14.704Z,1516687154.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:14.728Z,1516687154.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:15.109Z,1516687155.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:15.124Z,1516687155.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:15.509Z,1516687155.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:15.528Z,1516687155.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:15.904Z,1516687155.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:15.928Z,1516687155.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:16.309Z,1516687156.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:16.324Z,1516687156.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:16.716Z,1516687156.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:16.730Z,1516687156.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:17.103Z,1516687157.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:17.125Z,1516687157.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:17.501Z,1516687157.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:17.541Z,1516687157.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:17.914Z,1516687157.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:17.928Z,1516687157.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:18.299Z,1516687158.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:18.326Z,1516687158.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:18.702Z,1516687158.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:18.736Z,1516687158.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:19.101Z,1516687159.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:19.129Z,1516687159.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:19.501Z,1516687159.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:19.533Z,1516687159.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:19.901Z,1516687159.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:19.924Z,1516687159.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:20.301Z,1516687160.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:20.340Z,1516687160.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:20.700Z,1516687160.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:20.735Z,1516687160.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:21.104Z,1516687161.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:21.135Z,1516687161.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:21.501Z,1516687161.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T05:59:21.515Z,1516687161.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:21.921Z,1516687161.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:22.328Z,1516687162.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:22.720Z,1516687162.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:23.119Z,1516687163.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:23.521Z,1516687163.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:23.928Z,1516687163.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:24.319Z,1516687164.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:24.727Z,1516687164.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:25.120Z,1516687165.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:25.521Z,1516687165.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:25.921Z,1516687165.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:26.320Z,1516687166.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:26.721Z,1516687166.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:27.121Z,1516687167.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:27.524Z,1516687167.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:27.922Z,1516687167.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:28.321Z,1516687168.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:28.721Z,1516687168.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:29.119Z,1516687169.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:29.529Z,1516687169.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:29.922Z,1516687169.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:30.319Z,1516687170.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:30.721Z,1516687170.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:31.132Z,1516687171.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:31.519Z,1516687171.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:31.921Z,1516687171.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:32.321Z,1516687172.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:32.729Z,1516687172.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:33.123Z,1516687173.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:33.524Z,1516687173.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:33.919Z,1516687173.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:34.321Z,1516687174.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:34.720Z,1516687174.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:35.118Z,1516687175.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:35.523Z,1516687175.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:35.924Z,1516687175.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:36.318Z,1516687176.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:36.728Z,1516687176.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:37.122Z,1516687177.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:37.519Z,1516687177.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:37.921Z,1516687177.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:38.322Z,1516687178.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:38.722Z,1516687178.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:39.129Z,1516687179.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:39.523Z,1516687179.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:39.923Z,1516687179.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:40.324Z,1516687180.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:40.721Z,1516687180.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:41.119Z,1516687181.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:41.532Z,1516687181.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:41.923Z,1516687181.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:42.320Z,1516687182.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:42.721Z,1516687182.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:43.122Z,1516687183.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:43.522Z,1516687183.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:43.933Z,1516687183.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:44.329Z,1516687184.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:44.727Z,1516687184.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:45.127Z,1516687185.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:45.524Z,1516687185.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:45.925Z,1516687185.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:46.326Z,1516687186.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:46.733Z,1516687186.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:47.119Z,1516687187.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:47.524Z,1516687187.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:47.924Z,1516687187.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:48.321Z,1516687188.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:48.726Z,1516687188.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:49.133Z,1516687189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:49.521Z,1516687189.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:49.924Z,1516687189.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:50.324Z,1516687190.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:50.721Z,1516687190.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:51.124Z,1516687191.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:51.524Z,1516687191.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:51.924Z,1516687191.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:52.327Z,1516687192.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:52.724Z,1516687192.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:53.121Z,1516687193.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:53.524Z,1516687193.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:53.924Z,1516687193.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:54.324Z,1516687194.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:57.429Z,1516687197.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:57.564Z,1516687197.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:57.891Z,1516687197.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:58.291Z,1516687198.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:58.700Z,1516687198.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:59.092Z,1516687199.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:59.490Z,1516687199.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T05:59:59.893Z,1516687199.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:00.295Z,1516687200.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:00.701Z,1516687200.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:01.095Z,1516687201.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:01.500Z,1516687201.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:01.892Z,1516687201.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:02.293Z,1516687202.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:02.692Z,1516687202.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:03.089Z,1516687203.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:03.493Z,1516687203.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:03.892Z,1516687203.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:04.289Z,1516687204.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:04.693Z,1516687204.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:05.092Z,1516687205.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:05.491Z,1516687205.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:05.504Z,1516687205.504 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:00:05.504Z,1516687205.504 [NAL9602] No Fault, FailCount= 5 2018-01-23T06:00:05.860Z,1516687205.860 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:00:05.905Z,1516687205.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:06.295Z,1516687206.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:06.693Z,1516687206.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:07.096Z,1516687207.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:07.500Z,1516687207.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:07.893Z,1516687207.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:08.294Z,1516687208.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:08.701Z,1516687208.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:09.094Z,1516687209.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:09.496Z,1516687209.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:09.893Z,1516687209.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:10.291Z,1516687210.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:10.696Z,1516687210.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:11.100Z,1516687211.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:11.491Z,1516687211.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:11.894Z,1516687211.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:12.305Z,1516687212.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:12.695Z,1516687212.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:13.094Z,1516687213.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:13.493Z,1516687213.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:13.493Z,1516687213.493 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-01-23T06:00:13.493Z,1516687213.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:00:13.495Z,1516687213.495 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:13.495Z,1516687213.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-01-23T06:00:13.495Z,1516687213.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:00:13.497Z,1516687213.497 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:13.497Z,1516687213.497 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55 2018-01-23T06:00:13.497Z,1516687213.497 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:00:13.509Z,1516687213.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:00:13.509Z,1516687213.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:00:13.509Z,1516687213.509 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:00:13.881Z,1516687213.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:13.904Z,1516687213.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:00:13.905Z,1516687213.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-01-23T06:00:13.905Z,1516687213.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:00:13.905Z,1516687213.905 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-01-23T06:00:13.906Z,1516687213.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:00:13.906Z,1516687213.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55 2018-01-23T06:00:14.281Z,1516687214.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:14.294Z,1516687214.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:00:14.294Z,1516687214.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:00:14.294Z,1516687214.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:00:14.295Z,1516687214.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:00:14.295Z,1516687214.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:00:14.296Z,1516687214.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:00:14.296Z,1516687214.296 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:00:14.296Z,1516687214.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:00:14.297Z,1516687214.297 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:00:14.684Z,1516687214.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:14.698Z,1516687214.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:00:14.699Z,1516687214.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:15.070Z,1516687215.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:15.104Z,1516687215.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:00:15.105Z,1516687215.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:15.485Z,1516687215.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:15.498Z,1516687215.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:00:15.500Z,1516687215.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:15.886Z,1516687215.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:15.900Z,1516687215.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:00:15.901Z,1516687215.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:16.291Z,1516687216.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:16.304Z,1516687216.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:00:16.305Z,1516687216.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:16.657Z,1516687216.657 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:00:16.688Z,1516687216.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:16.702Z,1516687216.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:00:16.703Z,1516687216.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:17.076Z,1516687217.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:17.108Z,1516687217.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:00:17.108Z,1516687217.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:17.493Z,1516687217.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:17.507Z,1516687217.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:00:17.508Z,1516687217.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:17.896Z,1516687217.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:17.910Z,1516687217.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:00:17.911Z,1516687217.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:18.291Z,1516687218.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:18.305Z,1516687218.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:00:18.306Z,1516687218.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:18.683Z,1516687218.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:18.697Z,1516687218.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:00:18.698Z,1516687218.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:19.079Z,1516687219.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:19.100Z,1516687219.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:00:19.101Z,1516687219.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:19.477Z,1516687219.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:19.499Z,1516687219.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:00:19.500Z,1516687219.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:19.893Z,1516687219.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:19.912Z,1516687219.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:00:19.913Z,1516687219.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:20.295Z,1516687220.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:20.309Z,1516687220.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:00:20.310Z,1516687220.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:20.692Z,1516687220.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:20.706Z,1516687220.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:00:20.707Z,1516687220.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:21.084Z,1516687221.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:21.104Z,1516687221.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:00:21.105Z,1516687221.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:21.484Z,1516687221.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:21.501Z,1516687221.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:00:21.501Z,1516687221.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:21.876Z,1516687221.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:21.908Z,1516687221.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:00:21.909Z,1516687221.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:22.281Z,1516687222.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:22.294Z,1516687222.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:00:22.296Z,1516687222.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:22.694Z,1516687222.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:22.709Z,1516687222.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:00:22.710Z,1516687222.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:23.094Z,1516687223.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:23.109Z,1516687223.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:00:23.110Z,1516687223.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:23.493Z,1516687223.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:23.506Z,1516687223.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:00:23.508Z,1516687223.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:23.880Z,1516687223.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:23.897Z,1516687223.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:00:23.898Z,1516687223.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:24.276Z,1516687224.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:24.306Z,1516687224.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:00:24.307Z,1516687224.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:24.680Z,1516687224.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:24.700Z,1516687224.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:00:24.701Z,1516687224.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:25.090Z,1516687225.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:25.104Z,1516687225.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:00:25.105Z,1516687225.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:25.476Z,1516687225.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:25.498Z,1516687225.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:00:25.499Z,1516687225.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:25.891Z,1516687225.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:25.905Z,1516687225.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:00:25.906Z,1516687225.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:26.295Z,1516687226.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:26.309Z,1516687226.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:00:26.310Z,1516687226.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:26.691Z,1516687226.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:26.712Z,1516687226.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:00:26.713Z,1516687226.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:27.080Z,1516687227.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:27.108Z,1516687227.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:00:27.109Z,1516687227.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:27.480Z,1516687227.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:27.498Z,1516687227.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:00:27.499Z,1516687227.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:27.876Z,1516687227.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:27.908Z,1516687227.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:00:27.909Z,1516687227.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:28.282Z,1516687228.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:28.295Z,1516687228.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:00:28.296Z,1516687228.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:28.694Z,1516687228.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:28.712Z,1516687228.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:00:28.713Z,1516687228.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:29.143Z,1516687229.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:29.157Z,1516687229.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T06:00:29.158Z,1516687229.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:29.498Z,1516687229.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:29.511Z,1516687229.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:00:29.512Z,1516687229.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:29.879Z,1516687229.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:29.917Z,1516687229.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:00:29.923Z,1516687229.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:30.279Z,1516687230.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:30.320Z,1516687230.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:00:30.321Z,1516687230.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:30.675Z,1516687230.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:30.777Z,1516687230.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T06:00:30.778Z,1516687230.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:31.080Z,1516687231.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:31.121Z,1516687231.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:00:31.122Z,1516687231.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:31.479Z,1516687231.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:31.497Z,1516687231.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:00:31.498Z,1516687231.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:31.893Z,1516687231.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:31.906Z,1516687231.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:00:31.931Z,1516687231.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:32.317Z,1516687232.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:32.331Z,1516687232.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:00:32.332Z,1516687232.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:32.696Z,1516687232.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:32.728Z,1516687232.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:00:32.729Z,1516687232.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:33.082Z,1516687233.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:33.096Z,1516687233.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:00:33.097Z,1516687233.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:33.513Z,1516687233.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:33.533Z,1516687233.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:33.876Z,1516687233.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:33.903Z,1516687233.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:34.283Z,1516687234.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:34.304Z,1516687234.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:34.689Z,1516687234.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:34.732Z,1516687234.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:35.097Z,1516687235.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:35.149Z,1516687235.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:35.494Z,1516687235.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:35.544Z,1516687235.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:35.884Z,1516687235.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:35.911Z,1516687235.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:36.284Z,1516687236.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:36.309Z,1516687236.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:36.675Z,1516687236.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:36.711Z,1516687236.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:37.076Z,1516687237.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:37.123Z,1516687237.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:37.483Z,1516687237.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:37.541Z,1516687237.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:37.893Z,1516687237.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:37.945Z,1516687237.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:38.297Z,1516687238.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:38.357Z,1516687238.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:38.697Z,1516687238.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:38.741Z,1516687238.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:39.079Z,1516687239.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:39.151Z,1516687239.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:39.479Z,1516687239.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:39.533Z,1516687239.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:39.907Z,1516687239.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:39.938Z,1516687239.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:40.275Z,1516687240.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:40.329Z,1516687240.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:40.699Z,1516687240.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:40.713Z,1516687240.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:41.110Z,1516687241.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:41.133Z,1516687241.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:41.490Z,1516687241.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:41.562Z,1516687241.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:41.879Z,1516687241.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:41.961Z,1516687241.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:42.284Z,1516687242.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:42.311Z,1516687242.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:42.677Z,1516687242.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:42.691Z,1516687242.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:43.076Z,1516687243.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:43.090Z,1516687243.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:43.485Z,1516687243.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:43.518Z,1516687243.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:43.892Z,1516687243.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:43.917Z,1516687243.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:44.292Z,1516687244.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:44.316Z,1516687244.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:44.696Z,1516687244.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:44.725Z,1516687244.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:45.085Z,1516687245.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:45.124Z,1516687245.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:45.474Z,1516687245.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:45.488Z,1516687245.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:45.879Z,1516687245.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:45.893Z,1516687245.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:46.278Z,1516687246.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:46.291Z,1516687246.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:46.686Z,1516687246.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:46.705Z,1516687246.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:47.088Z,1516687247.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:47.102Z,1516687247.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:47.487Z,1516687247.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:47.508Z,1516687247.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:47.884Z,1516687247.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:47.898Z,1516687247.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:48.281Z,1516687248.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:48.295Z,1516687248.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:48.682Z,1516687248.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:48.696Z,1516687248.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:49.082Z,1516687249.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:49.096Z,1516687249.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:49.481Z,1516687249.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:49.495Z,1516687249.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:49.887Z,1516687249.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:49.901Z,1516687249.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:50.286Z,1516687250.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:50.305Z,1516687250.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:50.687Z,1516687250.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:50.701Z,1516687250.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:51.082Z,1516687251.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:51.096Z,1516687251.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:51.481Z,1516687251.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:51.501Z,1516687251.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:51.880Z,1516687251.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:51.898Z,1516687251.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:52.282Z,1516687252.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:52.296Z,1516687252.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:52.686Z,1516687252.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:52.705Z,1516687252.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:53.100Z,1516687253.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:53.114Z,1516687253.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:53.492Z,1516687253.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:53.512Z,1516687253.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:53.879Z,1516687253.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:53.893Z,1516687253.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:54.276Z,1516687254.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:54.307Z,1516687254.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:54.688Z,1516687254.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:54.702Z,1516687254.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:58.029Z,1516687258.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:58.044Z,1516687258.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:58.154Z,1516687258.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:58.169Z,1516687258.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:58.498Z,1516687258.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:58.540Z,1516687258.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:58.904Z,1516687258.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:58.918Z,1516687258.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:59.298Z,1516687259.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:59.317Z,1516687259.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:00:59.693Z,1516687259.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:00:59.707Z,1516687259.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:00.095Z,1516687260.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:00.108Z,1516687260.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:00.493Z,1516687260.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:00.507Z,1516687260.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:00.898Z,1516687260.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:00.929Z,1516687260.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:01.311Z,1516687261.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:01.328Z,1516687261.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:01.707Z,1516687261.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:01.725Z,1516687261.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:02.085Z,1516687262.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:02.117Z,1516687262.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:02.485Z,1516687262.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:02.520Z,1516687262.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:02.886Z,1516687262.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:02.917Z,1516687262.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:03.296Z,1516687263.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:03.314Z,1516687263.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:03.704Z,1516687263.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:03.718Z,1516687263.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:04.108Z,1516687264.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:04.122Z,1516687264.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:04.504Z,1516687264.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:04.518Z,1516687264.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:04.885Z,1516687264.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:04.912Z,1516687264.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:05.285Z,1516687265.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:05.317Z,1516687265.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:05.685Z,1516687265.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:05.716Z,1516687265.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:06.086Z,1516687266.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:06.121Z,1516687266.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:06.485Z,1516687266.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:06.517Z,1516687266.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:06.904Z,1516687266.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:06.918Z,1516687266.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:07.309Z,1516687267.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:07.323Z,1516687267.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:07.704Z,1516687267.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:07.718Z,1516687267.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:08.085Z,1516687268.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:08.117Z,1516687268.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:08.485Z,1516687268.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:08.512Z,1516687268.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:08.886Z,1516687268.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:08.912Z,1516687268.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:09.285Z,1516687269.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:09.317Z,1516687269.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:09.705Z,1516687269.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:09.719Z,1516687269.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:10.108Z,1516687270.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:10.122Z,1516687270.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:10.503Z,1516687270.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:10.517Z,1516687270.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:10.885Z,1516687270.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:10.921Z,1516687270.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:11.285Z,1516687271.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:11.317Z,1516687271.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:11.684Z,1516687271.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:11.717Z,1516687271.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:12.086Z,1516687272.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:12.121Z,1516687272.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:12.485Z,1516687272.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:12.517Z,1516687272.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:12.900Z,1516687272.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:12.927Z,1516687272.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:13.312Z,1516687273.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:13.326Z,1516687273.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:13.704Z,1516687273.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:13.718Z,1516687273.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:14.085Z,1516687274.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:14.110Z,1516687274.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:14.486Z,1516687274.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:14.517Z,1516687274.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:14.886Z,1516687274.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:14.917Z,1516687274.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:15.285Z,1516687275.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:15.317Z,1516687275.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:15.703Z,1516687275.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:15.721Z,1516687275.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:16.100Z,1516687276.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:16.133Z,1516687276.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:16.496Z,1516687276.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:16.522Z,1516687276.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:16.885Z,1516687276.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:16.928Z,1516687276.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:17.289Z,1516687277.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:17.321Z,1516687277.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:17.686Z,1516687277.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:17.700Z,1516687277.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:18.092Z,1516687278.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:18.106Z,1516687278.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:18.494Z,1516687278.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:18.509Z,1516687278.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:18.900Z,1516687278.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:18.915Z,1516687278.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:19.300Z,1516687279.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:19.320Z,1516687279.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:19.697Z,1516687279.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:19.712Z,1516687279.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:20.092Z,1516687280.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:20.114Z,1516687280.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:20.513Z,1516687280.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:20.911Z,1516687280.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:21.310Z,1516687281.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:21.729Z,1516687281.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:22.129Z,1516687282.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:22.519Z,1516687282.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:22.920Z,1516687282.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:23.321Z,1516687283.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:23.713Z,1516687283.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:24.120Z,1516687284.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:24.512Z,1516687284.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:24.928Z,1516687284.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:25.322Z,1516687285.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:25.718Z,1516687285.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:26.115Z,1516687286.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:26.518Z,1516687286.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:26.914Z,1516687286.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:27.316Z,1516687287.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:27.727Z,1516687287.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:28.123Z,1516687288.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:28.520Z,1516687288.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:28.924Z,1516687288.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:29.309Z,1516687289.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:29.716Z,1516687289.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:30.123Z,1516687290.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:30.509Z,1516687290.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:30.929Z,1516687290.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:31.340Z,1516687291.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:31.729Z,1516687291.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:32.121Z,1516687292.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:32.523Z,1516687292.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:32.920Z,1516687292.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:33.320Z,1516687293.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:33.725Z,1516687293.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:34.123Z,1516687294.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:34.528Z,1516687294.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:34.922Z,1516687294.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:35.319Z,1516687295.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:35.721Z,1516687295.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:36.124Z,1516687296.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:36.497Z,1516687296.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:36.937Z,1516687296.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:37.329Z,1516687297.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:37.733Z,1516687297.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:38.130Z,1516687298.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:38.508Z,1516687298.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:38.908Z,1516687298.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:39.313Z,1516687299.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:39.718Z,1516687299.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:40.110Z,1516687300.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:40.514Z,1516687300.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:40.894Z,1516687300.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:40.908Z,1516687300.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:41.288Z,1516687301.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:41.315Z,1516687301.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:41.697Z,1516687301.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:41.711Z,1516687301.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:42.108Z,1516687302.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:42.506Z,1516687302.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:42.914Z,1516687302.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:43.299Z,1516687303.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:43.313Z,1516687303.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:43.700Z,1516687303.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:43.715Z,1516687303.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:44.093Z,1516687304.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:44.113Z,1516687304.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:44.512Z,1516687304.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:44.909Z,1516687304.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:45.315Z,1516687305.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:45.700Z,1516687305.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:45.714Z,1516687305.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:46.098Z,1516687306.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:46.117Z,1516687306.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:46.498Z,1516687306.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:01:46.517Z,1516687306.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:46.909Z,1516687306.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:47.306Z,1516687307.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:47.717Z,1516687307.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:48.117Z,1516687308.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:48.514Z,1516687308.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:48.909Z,1516687308.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:49.308Z,1516687309.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:49.717Z,1516687309.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:50.114Z,1516687310.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:50.520Z,1516687310.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:50.911Z,1516687310.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:51.307Z,1516687311.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:51.713Z,1516687311.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:52.117Z,1516687312.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:52.514Z,1516687312.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:52.909Z,1516687312.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:53.309Z,1516687313.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:53.713Z,1516687313.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:54.114Z,1516687314.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:54.513Z,1516687314.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:54.910Z,1516687314.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:58.010Z,1516687318.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:58.160Z,1516687318.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:58.537Z,1516687318.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:58.944Z,1516687318.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:59.314Z,1516687319.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:01:59.716Z,1516687319.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:00.133Z,1516687320.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:00.514Z,1516687320.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:00.935Z,1516687320.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:01.348Z,1516687321.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:01.723Z,1516687321.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:02.116Z,1516687322.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:02.516Z,1516687322.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:02.917Z,1516687322.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:03.319Z,1516687323.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:03.728Z,1516687323.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:04.125Z,1516687324.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:04.526Z,1516687324.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:04.917Z,1516687324.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:05.317Z,1516687325.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:05.726Z,1516687325.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:06.131Z,1516687326.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:06.530Z,1516687326.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:06.923Z,1516687326.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:07.329Z,1516687327.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:07.732Z,1516687327.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:08.133Z,1516687328.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:08.528Z,1516687328.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:08.928Z,1516687328.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:09.328Z,1516687329.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:09.739Z,1516687329.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:10.136Z,1516687330.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:10.529Z,1516687330.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:10.930Z,1516687330.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:11.305Z,1516687331.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:11.728Z,1516687331.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:12.143Z,1516687332.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:12.536Z,1516687332.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:12.908Z,1516687332.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:13.312Z,1516687333.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:13.734Z,1516687333.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:14.140Z,1516687334.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:14.541Z,1516687334.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:14.913Z,1516687334.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:15.320Z,1516687335.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:15.726Z,1516687335.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:16.123Z,1516687336.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:16.518Z,1516687336.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:16.916Z,1516687336.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:17.315Z,1516687337.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:17.751Z,1516687337.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:18.126Z,1516687338.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:18.525Z,1516687338.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:18.916Z,1516687338.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:19.316Z,1516687339.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:19.725Z,1516687339.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:20.126Z,1516687340.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:20.528Z,1516687340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:20.925Z,1516687340.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:21.319Z,1516687341.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:21.728Z,1516687341.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:22.127Z,1516687342.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:22.524Z,1516687342.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:22.916Z,1516687342.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:23.314Z,1516687343.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:23.733Z,1516687343.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:24.129Z,1516687344.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:24.525Z,1516687344.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:24.916Z,1516687344.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:25.317Z,1516687345.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:25.726Z,1516687345.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:26.133Z,1516687346.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:26.529Z,1516687346.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:26.916Z,1516687346.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:27.317Z,1516687347.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:27.726Z,1516687347.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:28.125Z,1516687348.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:28.525Z,1516687348.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:28.920Z,1516687348.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:29.315Z,1516687349.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:29.716Z,1516687349.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:30.126Z,1516687350.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:30.525Z,1516687350.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:30.925Z,1516687350.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:31.329Z,1516687351.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:31.725Z,1516687351.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:32.118Z,1516687352.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:32.529Z,1516687352.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:32.929Z,1516687352.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:33.333Z,1516687353.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:33.727Z,1516687353.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:34.117Z,1516687354.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:34.518Z,1516687354.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:34.933Z,1516687354.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:35.318Z,1516687355.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:35.724Z,1516687355.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:36.133Z,1516687356.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:36.527Z,1516687356.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:36.931Z,1516687356.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:37.329Z,1516687357.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:37.723Z,1516687357.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:38.129Z,1516687358.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:38.530Z,1516687358.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:38.936Z,1516687358.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:39.331Z,1516687359.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:39.740Z,1516687359.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:40.129Z,1516687360.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:40.533Z,1516687360.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:40.937Z,1516687360.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:41.317Z,1516687361.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:41.716Z,1516687361.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:42.123Z,1516687362.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:42.522Z,1516687362.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:42.918Z,1516687362.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:43.323Z,1516687363.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:43.716Z,1516687363.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:44.118Z,1516687364.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:44.517Z,1516687364.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:44.925Z,1516687364.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:45.350Z,1516687365.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:45.722Z,1516687365.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:46.117Z,1516687366.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:46.524Z,1516687366.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:46.922Z,1516687366.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:47.321Z,1516687367.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:47.719Z,1516687367.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:48.129Z,1516687368.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:48.530Z,1516687368.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:48.926Z,1516687368.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:49.325Z,1516687369.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:49.725Z,1516687369.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:50.124Z,1516687370.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:50.527Z,1516687370.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:50.939Z,1516687370.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:51.330Z,1516687371.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:51.732Z,1516687371.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:52.125Z,1516687372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:52.525Z,1516687372.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:52.894Z,1516687372.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:52.928Z,1516687372.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:53.295Z,1516687373.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:53.320Z,1516687373.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:53.693Z,1516687373.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:53.725Z,1516687373.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:53.728Z,1516687373.728 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:02:53.728Z,1516687373.728 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:02:53.728Z,1516687373.728 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:02:53.729Z,1516687373.729 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:02:54.112Z,1516687374.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:54.133Z,1516687374.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:54.136Z,1516687374.136 [Default:CheckIn:D] Stopped 2018-01-23T06:02:54.136Z,1516687374.136 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:02:54.512Z,1516687374.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:54.539Z,1516687374.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:54.542Z,1516687374.542 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.034603 min 2018-01-23T06:02:54.547Z,1516687374.547 [Default:CheckIn:E] Stopped 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn] Stopped 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn](INFO): Running loop #17 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn] Running Loop=17 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:02:54.548Z,1516687374.548 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:02:54.908Z,1516687374.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:54.931Z,1516687374.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:58.020Z,1516687378.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:58.034Z,1516687378.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:58.127Z,1516687378.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:58.172Z,1516687378.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:58.500Z,1516687378.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:58.529Z,1516687378.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:58.912Z,1516687378.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:58.926Z,1516687378.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:59.296Z,1516687379.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:59.320Z,1516687379.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:02:59.689Z,1516687379.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:02:59.722Z,1516687379.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:00.086Z,1516687380.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:00.100Z,1516687380.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:00.485Z,1516687380.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:00.521Z,1516687380.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:00.896Z,1516687380.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:00.928Z,1516687380.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:01.304Z,1516687381.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:01.328Z,1516687381.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:01.696Z,1516687381.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:01.726Z,1516687381.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:02.089Z,1516687382.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:02.130Z,1516687382.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:02.482Z,1516687382.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:02.496Z,1516687382.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:02.882Z,1516687382.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:02.901Z,1516687382.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:03.285Z,1516687383.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:03.299Z,1516687383.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:03.682Z,1516687383.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:03.708Z,1516687383.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:04.092Z,1516687384.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:04.107Z,1516687384.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:04.500Z,1516687384.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:04.514Z,1516687384.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:04.891Z,1516687384.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:04.905Z,1516687384.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:05.289Z,1516687385.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:05.309Z,1516687385.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:05.689Z,1516687385.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:05.703Z,1516687385.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:06.087Z,1516687386.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:06.101Z,1516687386.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:06.485Z,1516687386.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:06.499Z,1516687386.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:06.890Z,1516687386.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:06.909Z,1516687386.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:07.291Z,1516687387.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:07.305Z,1516687387.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:07.689Z,1516687387.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:07.709Z,1516687387.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:08.085Z,1516687388.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:08.105Z,1516687388.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:08.486Z,1516687388.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:08.500Z,1516687388.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:08.887Z,1516687388.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:08.909Z,1516687388.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:09.284Z,1516687389.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:09.302Z,1516687389.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:09.686Z,1516687389.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:09.700Z,1516687389.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:10.089Z,1516687390.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:10.109Z,1516687390.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:10.492Z,1516687390.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:10.506Z,1516687390.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:10.891Z,1516687390.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:10.905Z,1516687390.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:11.289Z,1516687391.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:11.304Z,1516687391.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:11.688Z,1516687391.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:11.702Z,1516687391.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:12.087Z,1516687392.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:12.101Z,1516687392.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:12.485Z,1516687392.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:12.500Z,1516687392.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:12.891Z,1516687392.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:12.913Z,1516687392.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:13.295Z,1516687393.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:13.309Z,1516687393.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:13.695Z,1516687393.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:13.709Z,1516687393.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:14.093Z,1516687394.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:14.108Z,1516687394.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:14.487Z,1516687394.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:14.501Z,1516687394.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:14.501Z,1516687394.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-01-23T06:03:14.501Z,1516687394.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:03:14.503Z,1516687394.503 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:14.503Z,1516687394.503 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-01-23T06:03:14.503Z,1516687394.503 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:03:14.504Z,1516687394.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:14.505Z,1516687394.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56 2018-01-23T06:03:14.505Z,1516687394.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:03:14.516Z,1516687394.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:03:14.516Z,1516687394.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:03:14.517Z,1516687394.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:03:14.886Z,1516687394.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:14.931Z,1516687394.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:03:14.931Z,1516687394.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-01-23T06:03:14.932Z,1516687394.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:03:14.932Z,1516687394.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-01-23T06:03:14.932Z,1516687394.932 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:03:14.932Z,1516687394.932 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56 2018-01-23T06:03:15.285Z,1516687395.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:15.311Z,1516687395.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:03:15.312Z,1516687395.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:03:15.312Z,1516687395.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:03:15.312Z,1516687395.312 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:03:15.313Z,1516687395.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:03:15.313Z,1516687395.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:03:15.313Z,1516687395.313 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:03:15.314Z,1516687395.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:03:15.314Z,1516687395.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:03:15.677Z,1516687395.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:15.712Z,1516687395.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:03:15.713Z,1516687395.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:16.103Z,1516687396.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:16.124Z,1516687396.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:03:16.125Z,1516687396.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:16.503Z,1516687396.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:16.517Z,1516687396.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:03:16.518Z,1516687396.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:16.895Z,1516687396.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:16.920Z,1516687396.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:03:16.921Z,1516687396.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:17.293Z,1516687397.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:17.312Z,1516687397.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:03:17.313Z,1516687397.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:17.680Z,1516687397.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:17.717Z,1516687397.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:03:17.718Z,1516687397.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:18.095Z,1516687398.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:18.109Z,1516687398.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:03:18.110Z,1516687398.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:18.492Z,1516687398.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:18.511Z,1516687398.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:03:18.512Z,1516687398.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:18.903Z,1516687398.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:18.918Z,1516687398.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:03:18.919Z,1516687398.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:19.300Z,1516687399.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:19.314Z,1516687399.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:03:19.315Z,1516687399.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:19.700Z,1516687399.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:19.714Z,1516687399.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:03:19.715Z,1516687399.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:20.077Z,1516687400.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:20.102Z,1516687400.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:03:20.103Z,1516687400.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:20.476Z,1516687400.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:20.510Z,1516687400.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:03:20.511Z,1516687400.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:20.893Z,1516687400.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:20.912Z,1516687400.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:03:20.913Z,1516687400.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:21.278Z,1516687401.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:21.303Z,1516687401.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:03:21.304Z,1516687401.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:21.677Z,1516687401.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:21.716Z,1516687401.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:03:21.717Z,1516687401.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:22.104Z,1516687402.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:22.118Z,1516687402.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:03:22.119Z,1516687402.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:22.503Z,1516687402.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:22.524Z,1516687402.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:03:22.525Z,1516687402.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:22.902Z,1516687402.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:22.915Z,1516687402.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:03:22.916Z,1516687402.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:23.278Z,1516687403.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:23.309Z,1516687403.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:03:23.310Z,1516687403.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:23.678Z,1516687403.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:23.712Z,1516687403.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:03:23.713Z,1516687403.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:24.083Z,1516687404.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:24.114Z,1516687404.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:03:24.115Z,1516687404.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:24.476Z,1516687404.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:24.490Z,1516687404.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:03:24.499Z,1516687404.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:24.889Z,1516687404.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:24.914Z,1516687404.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:03:24.915Z,1516687404.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:25.292Z,1516687405.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:25.328Z,1516687405.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:03:25.329Z,1516687405.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:25.693Z,1516687405.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:25.718Z,1516687405.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:03:25.719Z,1516687405.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:26.077Z,1516687406.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:26.092Z,1516687406.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:03:26.093Z,1516687406.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:26.477Z,1516687406.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:26.491Z,1516687406.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:03:26.492Z,1516687406.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:26.881Z,1516687406.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:26.901Z,1516687406.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:03:26.902Z,1516687406.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:27.283Z,1516687407.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:27.297Z,1516687407.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:03:27.298Z,1516687407.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:27.682Z,1516687407.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:27.709Z,1516687407.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:03:27.710Z,1516687407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:28.088Z,1516687408.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:28.102Z,1516687408.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:03:28.103Z,1516687408.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:28.492Z,1516687408.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:28.506Z,1516687408.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:03:28.507Z,1516687408.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:28.892Z,1516687408.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:28.912Z,1516687408.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:03:28.913Z,1516687408.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:29.284Z,1516687409.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:29.298Z,1516687409.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:03:29.299Z,1516687409.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:29.682Z,1516687409.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:29.702Z,1516687409.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:03:29.703Z,1516687409.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:30.087Z,1516687410.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:30.101Z,1516687410.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:03:30.102Z,1516687410.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:30.486Z,1516687410.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:30.500Z,1516687410.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:03:30.501Z,1516687410.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:30.891Z,1516687410.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:30.905Z,1516687410.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:03:30.906Z,1516687410.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:31.292Z,1516687411.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:31.305Z,1516687411.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:03:31.306Z,1516687411.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:31.691Z,1516687411.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:31.705Z,1516687411.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:03:31.706Z,1516687411.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:32.082Z,1516687412.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:32.102Z,1516687412.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:03:32.104Z,1516687412.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:32.486Z,1516687412.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:32.507Z,1516687412.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:03:32.508Z,1516687412.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:32.889Z,1516687412.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:32.903Z,1516687412.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:03:32.904Z,1516687412.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:33.280Z,1516687413.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:33.312Z,1516687413.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:03:33.313Z,1516687413.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:33.686Z,1516687413.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:33.700Z,1516687413.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:03:33.701Z,1516687413.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:34.092Z,1516687414.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:34.114Z,1516687414.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:03:34.119Z,1516687414.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:34.499Z,1516687414.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:34.513Z,1516687414.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:34.913Z,1516687414.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:35.301Z,1516687415.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:35.701Z,1516687415.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:36.112Z,1516687416.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:36.508Z,1516687416.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:36.913Z,1516687416.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:37.317Z,1516687417.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:37.713Z,1516687417.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:38.107Z,1516687418.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:38.503Z,1516687418.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:38.901Z,1516687418.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:39.301Z,1516687419.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:39.708Z,1516687419.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:40.112Z,1516687420.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:40.515Z,1516687420.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:40.909Z,1516687420.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:41.305Z,1516687421.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:41.707Z,1516687421.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:42.116Z,1516687422.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:42.489Z,1516687422.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:42.912Z,1516687422.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:43.292Z,1516687423.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:43.328Z,1516687423.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:43.688Z,1516687423.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:43.713Z,1516687423.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:44.077Z,1516687424.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:44.092Z,1516687424.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:44.477Z,1516687424.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:44.496Z,1516687424.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:44.877Z,1516687424.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:44.892Z,1516687424.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:45.290Z,1516687425.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:45.320Z,1516687425.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:45.685Z,1516687425.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:45.699Z,1516687425.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:46.088Z,1516687426.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:46.103Z,1516687426.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:46.496Z,1516687426.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:46.510Z,1516687426.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:46.895Z,1516687426.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:46.909Z,1516687426.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:47.282Z,1516687427.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:47.301Z,1516687427.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:47.683Z,1516687427.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:47.705Z,1516687427.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:48.091Z,1516687428.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:48.105Z,1516687428.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:48.490Z,1516687428.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:48.504Z,1516687428.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:48.893Z,1516687428.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:48.915Z,1516687428.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:49.303Z,1516687429.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:49.317Z,1516687429.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:49.700Z,1516687429.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:49.714Z,1516687429.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:50.077Z,1516687430.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:50.109Z,1516687430.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:50.477Z,1516687430.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:50.512Z,1516687430.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:50.875Z,1516687430.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:50.898Z,1516687430.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:51.278Z,1516687431.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:51.304Z,1516687431.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:51.678Z,1516687431.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:51.710Z,1516687431.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:52.092Z,1516687432.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:52.114Z,1516687432.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:52.506Z,1516687432.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:52.521Z,1516687432.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:52.897Z,1516687432.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:52.911Z,1516687432.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:53.276Z,1516687433.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:53.309Z,1516687433.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:53.678Z,1516687433.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:53.709Z,1516687433.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:54.079Z,1516687434.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:54.114Z,1516687434.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:54.475Z,1516687434.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:54.498Z,1516687434.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:54.892Z,1516687434.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:54.915Z,1516687434.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:55.303Z,1516687435.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:55.317Z,1516687435.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:58.384Z,1516687438.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:58.413Z,1516687438.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:58.515Z,1516687438.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:58.530Z,1516687438.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:58.869Z,1516687438.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:58.910Z,1516687438.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:59.271Z,1516687439.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:59.285Z,1516687439.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:03:59.673Z,1516687439.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:03:59.713Z,1516687439.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:00.084Z,1516687440.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:00.114Z,1516687440.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:00.480Z,1516687440.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:00.494Z,1516687440.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:00.884Z,1516687440.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:00.898Z,1516687440.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:01.270Z,1516687441.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:01.285Z,1516687441.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:01.672Z,1516687441.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:01.686Z,1516687441.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:02.069Z,1516687442.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:02.088Z,1516687442.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:02.469Z,1516687442.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:02.487Z,1516687442.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:02.876Z,1516687442.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:02.890Z,1516687442.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:03.275Z,1516687443.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:03.289Z,1516687443.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:03.674Z,1516687443.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:03.689Z,1516687443.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:04.071Z,1516687444.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:04.085Z,1516687444.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:04.464Z,1516687444.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:04.487Z,1516687444.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:04.893Z,1516687444.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:04.922Z,1516687444.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:05.280Z,1516687445.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:05.294Z,1516687445.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:05.679Z,1516687445.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:05.694Z,1516687445.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:06.065Z,1516687446.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:06.097Z,1516687446.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:06.479Z,1516687446.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:06.493Z,1516687446.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:06.884Z,1516687446.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:06.898Z,1516687446.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:07.284Z,1516687447.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:07.298Z,1516687447.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:07.681Z,1516687447.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:07.695Z,1516687447.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:08.079Z,1516687448.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:08.093Z,1516687448.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:08.468Z,1516687448.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:08.487Z,1516687448.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:08.881Z,1516687448.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:08.895Z,1516687448.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:09.280Z,1516687449.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:09.294Z,1516687449.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:09.685Z,1516687449.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:09.699Z,1516687449.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:10.071Z,1516687450.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:10.088Z,1516687450.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:10.464Z,1516687450.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:10.487Z,1516687450.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:10.879Z,1516687450.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:10.894Z,1516687450.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:11.284Z,1516687451.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:11.298Z,1516687451.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:11.683Z,1516687451.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:11.701Z,1516687451.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:12.068Z,1516687452.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:12.095Z,1516687452.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:12.461Z,1516687452.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:12.488Z,1516687452.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:12.883Z,1516687452.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:12.898Z,1516687452.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:13.290Z,1516687453.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:13.309Z,1516687453.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:13.680Z,1516687453.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:13.694Z,1516687453.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:14.062Z,1516687454.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:14.089Z,1516687454.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:14.466Z,1516687454.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:14.492Z,1516687454.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:14.883Z,1516687454.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:14.909Z,1516687454.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:15.280Z,1516687455.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:15.297Z,1516687455.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:15.680Z,1516687455.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:15.694Z,1516687455.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:15.708Z,1516687455.708 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:04:16.065Z,1516687456.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:16.093Z,1516687456.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:16.464Z,1516687456.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:16.497Z,1516687456.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:16.884Z,1516687456.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:16.899Z,1516687456.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:17.284Z,1516687457.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:17.298Z,1516687457.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:17.696Z,1516687457.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:17.717Z,1516687457.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:18.066Z,1516687458.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:18.097Z,1516687458.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:18.469Z,1516687458.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:18.496Z,1516687458.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:18.884Z,1516687458.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:18.899Z,1516687458.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:19.284Z,1516687459.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:19.298Z,1516687459.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:19.684Z,1516687459.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:19.709Z,1516687459.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:20.063Z,1516687460.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:20.086Z,1516687460.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:20.462Z,1516687460.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:20.476Z,1516687460.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:20.863Z,1516687460.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:20.877Z,1516687460.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:21.276Z,1516687461.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:21.307Z,1516687461.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:21.688Z,1516687461.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:21.717Z,1516687461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:22.084Z,1516687462.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:22.108Z,1516687462.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:22.464Z,1516687462.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:22.478Z,1516687462.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:22.873Z,1516687462.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:22.909Z,1516687462.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:23.274Z,1516687463.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:23.288Z,1516687463.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:23.696Z,1516687463.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:23.718Z,1516687463.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:24.074Z,1516687464.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:24.088Z,1516687464.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:24.488Z,1516687464.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:24.520Z,1516687464.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:24.884Z,1516687464.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:24.898Z,1516687464.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:25.274Z,1516687465.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:25.288Z,1516687465.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:25.673Z,1516687465.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:25.687Z,1516687465.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:26.067Z,1516687466.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:26.093Z,1516687466.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:26.475Z,1516687466.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:26.489Z,1516687466.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:26.874Z,1516687466.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:26.888Z,1516687466.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:27.279Z,1516687467.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:27.302Z,1516687467.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:27.684Z,1516687467.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:27.698Z,1516687467.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:28.083Z,1516687468.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:28.097Z,1516687468.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:28.467Z,1516687468.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:28.489Z,1516687468.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:28.869Z,1516687468.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:28.891Z,1516687468.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:29.274Z,1516687469.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:29.288Z,1516687469.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:29.672Z,1516687469.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:29.686Z,1516687469.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:30.084Z,1516687470.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:30.099Z,1516687470.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:30.486Z,1516687470.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:30.500Z,1516687470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:30.876Z,1516687470.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:30.903Z,1516687470.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:31.272Z,1516687471.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:31.287Z,1516687471.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:31.683Z,1516687471.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:31.697Z,1516687471.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:32.062Z,1516687472.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:32.092Z,1516687472.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:32.471Z,1516687472.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:32.490Z,1516687472.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:32.863Z,1516687472.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:32.891Z,1516687472.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:33.276Z,1516687473.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:33.305Z,1516687473.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:33.685Z,1516687473.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:33.706Z,1516687473.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:34.083Z,1516687474.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:34.097Z,1516687474.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:34.461Z,1516687474.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:34.484Z,1516687474.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:34.864Z,1516687474.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:34.894Z,1516687474.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:35.270Z,1516687475.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:35.300Z,1516687475.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:35.659Z,1516687475.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:35.705Z,1516687475.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:36.074Z,1516687476.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:36.092Z,1516687476.092 [PNI_TCM](ERROR): CRC does not match. Expected:0x62628 got:0x6210 2018-01-23T06:04:36.120Z,1516687476.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:36.489Z,1516687476.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:36.503Z,1516687476.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:36.872Z,1516687476.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:36.909Z,1516687476.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:37.270Z,1516687477.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:37.305Z,1516687477.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:37.675Z,1516687477.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:37.705Z,1516687477.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:38.065Z,1516687478.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:38.105Z,1516687478.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:38.470Z,1516687478.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:38.516Z,1516687478.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:38.870Z,1516687478.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:38.914Z,1516687478.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:39.278Z,1516687479.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:39.308Z,1516687479.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:39.697Z,1516687479.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:39.717Z,1516687479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:40.084Z,1516687480.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:40.114Z,1516687480.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:40.464Z,1516687480.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:40.509Z,1516687480.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:40.876Z,1516687480.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:40.910Z,1516687480.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:41.269Z,1516687481.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:41.283Z,1516687481.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:41.674Z,1516687481.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:41.720Z,1516687481.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:42.087Z,1516687482.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:42.111Z,1516687482.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:42.489Z,1516687482.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:42.520Z,1516687482.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:42.881Z,1516687482.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:42.912Z,1516687482.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:43.273Z,1516687483.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:43.320Z,1516687483.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:43.673Z,1516687483.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:43.716Z,1516687483.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:44.062Z,1516687484.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:44.081Z,1516687484.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:44.469Z,1516687484.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:44.491Z,1516687484.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:44.871Z,1516687484.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:44.919Z,1516687484.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:45.272Z,1516687485.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:45.291Z,1516687485.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:45.678Z,1516687485.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:45.693Z,1516687485.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:46.078Z,1516687486.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:46.092Z,1516687486.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:46.466Z,1516687486.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:46.513Z,1516687486.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:46.870Z,1516687486.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:46.887Z,1516687486.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:47.272Z,1516687487.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:47.289Z,1516687487.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:47.680Z,1516687487.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:47.694Z,1516687487.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:48.080Z,1516687488.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:48.117Z,1516687488.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:48.480Z,1516687488.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:48.497Z,1516687488.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:48.881Z,1516687488.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:48.897Z,1516687488.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:49.264Z,1516687489.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:49.297Z,1516687489.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:49.674Z,1516687489.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:49.698Z,1516687489.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:50.063Z,1516687490.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:50.096Z,1516687490.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:50.474Z,1516687490.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:50.492Z,1516687490.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:50.860Z,1516687490.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:50.897Z,1516687490.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:51.272Z,1516687491.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:51.298Z,1516687491.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:51.676Z,1516687491.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:51.711Z,1516687491.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:52.072Z,1516687492.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:52.102Z,1516687492.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:52.459Z,1516687492.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:52.476Z,1516687492.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:52.861Z,1516687492.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:52.881Z,1516687492.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:53.270Z,1516687493.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:53.284Z,1516687493.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:53.666Z,1516687493.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:53.688Z,1516687493.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:54.077Z,1516687494.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:54.105Z,1516687494.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:54.480Z,1516687494.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:54.511Z,1516687494.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:54.880Z,1516687494.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:54.915Z,1516687494.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:55.269Z,1516687495.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:55.292Z,1516687495.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:55.671Z,1516687495.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:55.689Z,1516687495.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:58.767Z,1516687498.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:58.781Z,1516687498.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:58.877Z,1516687498.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:58.924Z,1516687498.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:59.248Z,1516687499.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:59.289Z,1516687499.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:04:59.659Z,1516687499.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:04:59.673Z,1516687499.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:00.044Z,1516687500.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:00.067Z,1516687500.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:00.437Z,1516687500.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:00.470Z,1516687500.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:00.830Z,1516687500.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:00.844Z,1516687500.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:01.238Z,1516687501.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:01.252Z,1516687501.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:01.637Z,1516687501.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:01.657Z,1516687501.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:02.036Z,1516687502.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:02.050Z,1516687502.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:02.442Z,1516687502.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:02.457Z,1516687502.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:02.848Z,1516687502.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:02.862Z,1516687502.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:03.236Z,1516687503.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:03.250Z,1516687503.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:03.634Z,1516687503.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:03.648Z,1516687503.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:04.035Z,1516687504.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:04.057Z,1516687504.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:04.436Z,1516687504.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:04.450Z,1516687504.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:04.834Z,1516687504.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:04.848Z,1516687504.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:05.240Z,1516687505.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:05.254Z,1516687505.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:05.641Z,1516687505.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:05.655Z,1516687505.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:06.039Z,1516687506.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:06.053Z,1516687506.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:06.432Z,1516687506.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:06.448Z,1516687506.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:06.827Z,1516687506.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:06.840Z,1516687506.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:07.228Z,1516687507.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:07.277Z,1516687507.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:07.634Z,1516687507.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:07.656Z,1516687507.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:08.040Z,1516687508.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:08.054Z,1516687508.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:08.438Z,1516687508.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:08.457Z,1516687508.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:08.838Z,1516687508.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:08.853Z,1516687508.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:09.234Z,1516687509.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:09.248Z,1516687509.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:09.630Z,1516687509.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:09.649Z,1516687509.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:10.032Z,1516687510.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:10.051Z,1516687510.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:10.434Z,1516687510.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:10.485Z,1516687510.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:10.825Z,1516687510.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:10.859Z,1516687510.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:11.240Z,1516687511.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:11.267Z,1516687511.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:11.649Z,1516687511.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:11.662Z,1516687511.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:12.040Z,1516687512.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:12.061Z,1516687512.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:12.425Z,1516687512.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:12.450Z,1516687512.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:12.825Z,1516687512.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:12.853Z,1516687512.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:13.226Z,1516687513.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:13.252Z,1516687513.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:13.625Z,1516687513.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:13.657Z,1516687513.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:14.043Z,1516687514.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:14.065Z,1516687514.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:14.442Z,1516687514.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:14.468Z,1516687514.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:14.848Z,1516687514.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:14.862Z,1516687514.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:15.226Z,1516687515.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:15.259Z,1516687515.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:15.630Z,1516687515.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:15.657Z,1516687515.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:16.026Z,1516687516.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:16.057Z,1516687516.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:16.427Z,1516687516.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:16.462Z,1516687516.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:16.830Z,1516687516.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:16.857Z,1516687516.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:17.240Z,1516687517.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:17.263Z,1516687517.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:17.648Z,1516687517.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:17.674Z,1516687517.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:18.044Z,1516687518.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:18.073Z,1516687518.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:18.425Z,1516687518.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:18.452Z,1516687518.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:18.825Z,1516687518.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:18.855Z,1516687518.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:19.226Z,1516687519.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:19.241Z,1516687519.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:19.625Z,1516687519.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:19.645Z,1516687519.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:20.040Z,1516687520.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:20.076Z,1516687520.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:20.436Z,1516687520.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:20.450Z,1516687520.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:20.844Z,1516687520.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:20.874Z,1516687520.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:21.235Z,1516687521.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:21.249Z,1516687521.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:21.635Z,1516687521.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:21.650Z,1516687521.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:22.035Z,1516687522.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:22.049Z,1516687522.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:22.435Z,1516687522.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:22.449Z,1516687522.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:22.833Z,1516687522.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:22.849Z,1516687522.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:23.236Z,1516687523.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:23.251Z,1516687523.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:23.640Z,1516687523.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:23.654Z,1516687523.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:24.037Z,1516687524.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:24.051Z,1516687524.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:24.433Z,1516687524.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:24.447Z,1516687524.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:24.833Z,1516687524.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:24.847Z,1516687524.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:25.233Z,1516687525.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:25.248Z,1516687525.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:25.631Z,1516687525.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:25.650Z,1516687525.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:26.046Z,1516687526.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:26.100Z,1516687526.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:26.445Z,1516687526.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:26.461Z,1516687526.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:26.844Z,1516687526.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:26.867Z,1516687526.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:27.232Z,1516687527.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:27.284Z,1516687527.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:27.651Z,1516687527.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:27.674Z,1516687527.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:28.042Z,1516687528.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:28.093Z,1516687528.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:28.477Z,1516687528.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:28.539Z,1516687528.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:28.851Z,1516687528.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:28.877Z,1516687528.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:29.237Z,1516687529.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:29.257Z,1516687529.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:29.645Z,1516687529.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:29.683Z,1516687529.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:30.046Z,1516687530.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:30.081Z,1516687530.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:30.441Z,1516687530.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:30.490Z,1516687530.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:30.842Z,1516687530.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:30.892Z,1516687530.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:31.247Z,1516687531.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:31.265Z,1516687531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:31.653Z,1516687531.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:31.668Z,1516687531.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:32.047Z,1516687532.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:32.102Z,1516687532.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:32.427Z,1516687532.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:32.462Z,1516687532.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:32.831Z,1516687532.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:32.865Z,1516687532.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:33.232Z,1516687533.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:33.284Z,1516687533.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:33.631Z,1516687533.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:33.670Z,1516687533.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:34.068Z,1516687534.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:34.091Z,1516687534.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:34.458Z,1516687534.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:34.481Z,1516687534.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:34.851Z,1516687534.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:34.869Z,1516687534.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:35.232Z,1516687535.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:35.274Z,1516687535.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:35.658Z,1516687535.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:35.720Z,1516687535.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:36.042Z,1516687536.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:36.084Z,1516687536.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:36.446Z,1516687536.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:36.471Z,1516687536.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:36.846Z,1516687536.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:36.900Z,1516687536.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:37.235Z,1516687537.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:37.301Z,1516687537.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:37.635Z,1516687537.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:37.654Z,1516687537.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:38.040Z,1516687538.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:38.055Z,1516687538.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:38.439Z,1516687538.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:38.453Z,1516687538.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:38.840Z,1516687538.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:38.855Z,1516687538.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:39.240Z,1516687539.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:39.254Z,1516687539.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:39.637Z,1516687539.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:39.676Z,1516687539.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:40.039Z,1516687540.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:40.053Z,1516687540.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:40.453Z,1516687540.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:40.487Z,1516687540.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:40.844Z,1516687540.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:40.881Z,1516687540.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:41.235Z,1516687541.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:41.249Z,1516687541.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:41.630Z,1516687541.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:41.657Z,1516687541.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:42.040Z,1516687542.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:42.063Z,1516687542.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:42.448Z,1516687542.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:42.462Z,1516687542.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:42.845Z,1516687542.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:42.865Z,1516687542.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:43.232Z,1516687543.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:43.256Z,1516687543.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:43.625Z,1516687543.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:43.653Z,1516687543.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:44.041Z,1516687544.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:44.069Z,1516687544.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:44.442Z,1516687544.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:44.462Z,1516687544.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:44.840Z,1516687544.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:44.871Z,1516687544.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:45.226Z,1516687545.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:45.258Z,1516687545.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:45.629Z,1516687545.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:45.680Z,1516687545.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:46.040Z,1516687546.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:46.066Z,1516687546.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:46.440Z,1516687546.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:46.473Z,1516687546.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:46.840Z,1516687546.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:46.855Z,1516687546.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:47.228Z,1516687547.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:47.319Z,1516687547.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:47.627Z,1516687547.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:47.642Z,1516687547.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:48.040Z,1516687548.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:48.065Z,1516687548.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:48.444Z,1516687548.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:48.458Z,1516687548.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:48.840Z,1516687548.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:48.855Z,1516687548.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:49.230Z,1516687549.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:49.245Z,1516687549.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:49.627Z,1516687549.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:49.641Z,1516687549.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:50.065Z,1516687550.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:50.115Z,1516687550.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:50.440Z,1516687550.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:50.454Z,1516687550.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:50.840Z,1516687550.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:50.855Z,1516687550.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:51.230Z,1516687551.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:51.245Z,1516687551.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:51.627Z,1516687551.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:51.642Z,1516687551.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:52.040Z,1516687552.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:52.065Z,1516687552.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:52.445Z,1516687552.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:52.469Z,1516687552.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:52.838Z,1516687552.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:52.865Z,1516687552.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:53.239Z,1516687553.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:53.254Z,1516687553.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:53.632Z,1516687553.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:53.655Z,1516687553.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:54.044Z,1516687554.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:54.058Z,1516687554.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:54.448Z,1516687554.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:54.469Z,1516687554.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:54.843Z,1516687554.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:54.866Z,1516687554.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:55.232Z,1516687555.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:55.253Z,1516687555.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:55.630Z,1516687555.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:55.662Z,1516687555.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:56.046Z,1516687556.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:56.060Z,1516687556.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:59.197Z,1516687559.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:59.211Z,1516687559.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:59.334Z,1516687559.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:59.369Z,1516687559.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:05:59.674Z,1516687559.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:05:59.700Z,1516687559.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:00.074Z,1516687560.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:00.106Z,1516687560.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:00.470Z,1516687560.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:00.502Z,1516687560.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:00.873Z,1516687560.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:00.905Z,1516687560.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:01.279Z,1516687561.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:01.306Z,1516687561.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:01.698Z,1516687561.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:01.712Z,1516687561.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:02.080Z,1516687562.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:02.117Z,1516687562.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:02.473Z,1516687562.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:02.514Z,1516687562.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:02.873Z,1516687562.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:02.912Z,1516687562.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:03.270Z,1516687563.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:03.284Z,1516687563.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:03.669Z,1516687563.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:03.683Z,1516687563.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:04.080Z,1516687564.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:04.111Z,1516687564.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:04.488Z,1516687564.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:04.523Z,1516687564.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:04.880Z,1516687564.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:04.894Z,1516687564.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:05.277Z,1516687565.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:05.292Z,1516687565.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:05.673Z,1516687565.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:05.696Z,1516687565.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:06.087Z,1516687566.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:06.108Z,1516687566.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:06.488Z,1516687566.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:06.506Z,1516687566.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:06.887Z,1516687566.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:06.901Z,1516687566.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:07.279Z,1516687567.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:07.293Z,1516687567.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:07.676Z,1516687567.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:07.695Z,1516687567.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:08.087Z,1516687568.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:08.102Z,1516687568.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:08.491Z,1516687568.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:08.505Z,1516687568.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:08.887Z,1516687568.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:08.902Z,1516687568.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:09.276Z,1516687569.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:09.295Z,1516687569.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:09.678Z,1516687569.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:09.692Z,1516687569.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:10.087Z,1516687570.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:10.102Z,1516687570.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:10.490Z,1516687570.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:10.509Z,1516687570.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:10.891Z,1516687570.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:10.905Z,1516687570.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:11.276Z,1516687571.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:11.295Z,1516687571.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:11.679Z,1516687571.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:11.705Z,1516687571.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:12.093Z,1516687572.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:12.107Z,1516687572.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:12.484Z,1516687572.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:12.505Z,1516687572.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:12.884Z,1516687572.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:12.915Z,1516687572.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:13.270Z,1516687573.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:13.301Z,1516687573.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:13.673Z,1516687573.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:13.698Z,1516687573.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:14.088Z,1516687574.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:14.102Z,1516687574.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:14.492Z,1516687574.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:14.506Z,1516687574.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:14.888Z,1516687574.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:14.902Z,1516687574.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:15.270Z,1516687575.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:15.297Z,1516687575.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:15.669Z,1516687575.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:15.707Z,1516687575.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:15.707Z,1516687575.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-01-23T06:06:15.707Z,1516687575.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:06:15.709Z,1516687575.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:15.709Z,1516687575.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-01-23T06:06:15.709Z,1516687575.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:06:15.711Z,1516687575.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:15.711Z,1516687575.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57 2018-01-23T06:06:15.711Z,1516687575.711 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:06:15.729Z,1516687575.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:06:15.729Z,1516687575.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:06:15.729Z,1516687575.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:06:16.080Z,1516687576.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:16.125Z,1516687576.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:06:16.125Z,1516687576.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-01-23T06:06:16.125Z,1516687576.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:06:16.125Z,1516687576.125 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-01-23T06:06:16.126Z,1516687576.126 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:06:16.126Z,1516687576.126 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57 2018-01-23T06:06:16.484Z,1516687576.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:16.516Z,1516687576.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:06:16.516Z,1516687576.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:06:16.516Z,1516687576.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:06:16.517Z,1516687576.517 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:06:16.517Z,1516687576.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:06:16.517Z,1516687576.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:06:16.518Z,1516687576.518 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:06:16.518Z,1516687576.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:06:16.519Z,1516687576.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:06:16.880Z,1516687576.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:16.912Z,1516687576.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:06:16.913Z,1516687576.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:17.274Z,1516687577.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:17.308Z,1516687577.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:06:17.309Z,1516687577.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:17.673Z,1516687577.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:17.708Z,1516687577.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:06:17.709Z,1516687577.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:18.084Z,1516687578.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:18.119Z,1516687578.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:06:18.120Z,1516687578.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:18.488Z,1516687578.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:18.513Z,1516687578.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:06:18.514Z,1516687578.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:18.892Z,1516687578.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:18.917Z,1516687578.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:06:18.918Z,1516687578.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:19.282Z,1516687579.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:19.322Z,1516687579.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:06:19.323Z,1516687579.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:19.673Z,1516687579.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:19.692Z,1516687579.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:06:19.693Z,1516687579.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:20.092Z,1516687580.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:20.115Z,1516687580.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:06:20.116Z,1516687580.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:20.496Z,1516687580.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:20.520Z,1516687580.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:06:20.521Z,1516687580.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:20.884Z,1516687580.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:20.918Z,1516687580.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:06:20.919Z,1516687580.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:21.282Z,1516687581.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:21.296Z,1516687581.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:06:21.297Z,1516687581.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:21.674Z,1516687581.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:21.703Z,1516687581.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:06:21.704Z,1516687581.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:22.083Z,1516687582.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:22.097Z,1516687582.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:06:22.098Z,1516687582.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:22.484Z,1516687582.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:22.498Z,1516687582.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:06:22.499Z,1516687582.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:22.896Z,1516687582.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:22.930Z,1516687582.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:06:22.931Z,1516687582.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:23.281Z,1516687583.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:23.295Z,1516687583.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:06:23.296Z,1516687583.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:23.676Z,1516687583.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:23.690Z,1516687583.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:06:23.692Z,1516687583.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:24.084Z,1516687584.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:24.098Z,1516687584.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:06:24.099Z,1516687584.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:24.482Z,1516687584.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:24.496Z,1516687584.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:06:24.497Z,1516687584.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:24.883Z,1516687584.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:24.897Z,1516687584.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:06:24.898Z,1516687584.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:25.277Z,1516687585.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:25.304Z,1516687585.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:06:25.305Z,1516687585.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:25.682Z,1516687585.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:25.700Z,1516687585.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:06:25.701Z,1516687585.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:26.087Z,1516687586.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:26.101Z,1516687586.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:06:26.102Z,1516687586.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:26.488Z,1516687586.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:26.502Z,1516687586.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:06:26.503Z,1516687586.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:26.888Z,1516687586.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:26.902Z,1516687586.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:06:26.903Z,1516687586.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:27.273Z,1516687587.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:27.296Z,1516687587.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:06:27.297Z,1516687587.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:27.674Z,1516687587.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:27.697Z,1516687587.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:06:27.698Z,1516687587.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:28.084Z,1516687588.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:28.111Z,1516687588.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:06:28.112Z,1516687588.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:28.492Z,1516687588.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:28.506Z,1516687588.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:06:28.507Z,1516687588.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:28.896Z,1516687588.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:28.910Z,1516687588.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:06:28.912Z,1516687588.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:29.270Z,1516687589.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:29.305Z,1516687589.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:06:29.306Z,1516687589.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:29.669Z,1516687589.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:29.700Z,1516687589.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:06:29.701Z,1516687589.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:30.085Z,1516687590.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:30.107Z,1516687590.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:06:30.108Z,1516687590.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:30.492Z,1516687590.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:30.506Z,1516687590.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:06:30.507Z,1516687590.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:30.884Z,1516687590.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:30.905Z,1516687590.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:06:30.906Z,1516687590.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:31.270Z,1516687591.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:31.304Z,1516687591.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:06:31.305Z,1516687591.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:31.674Z,1516687591.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:31.699Z,1516687591.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:06:31.700Z,1516687591.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:32.069Z,1516687592.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:32.104Z,1516687592.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:06:32.105Z,1516687592.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:32.484Z,1516687592.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:32.515Z,1516687592.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:06:32.516Z,1516687592.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:32.892Z,1516687592.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:32.906Z,1516687592.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:06:32.907Z,1516687592.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:33.284Z,1516687593.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:33.306Z,1516687593.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:06:33.307Z,1516687593.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:33.669Z,1516687593.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:33.704Z,1516687593.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:06:33.705Z,1516687593.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:34.069Z,1516687594.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:34.095Z,1516687594.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:06:34.096Z,1516687594.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:34.474Z,1516687594.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:34.500Z,1516687594.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:06:34.501Z,1516687594.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:34.870Z,1516687594.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:34.883Z,1516687594.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:06:34.884Z,1516687594.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:35.288Z,1516687595.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:35.310Z,1516687595.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:06:35.311Z,1516687595.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:35.692Z,1516687595.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:35.723Z,1516687595.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:36.092Z,1516687596.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:36.117Z,1516687596.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:36.475Z,1516687596.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:36.489Z,1516687596.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:36.874Z,1516687596.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:36.888Z,1516687596.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:37.282Z,1516687597.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:37.297Z,1516687597.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:37.679Z,1516687597.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:37.693Z,1516687597.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:38.088Z,1516687598.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:38.102Z,1516687598.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:38.492Z,1516687598.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:38.506Z,1516687598.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:38.883Z,1516687598.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:38.901Z,1516687598.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:39.277Z,1516687599.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:39.296Z,1516687599.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:39.680Z,1516687599.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:39.694Z,1516687599.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:40.074Z,1516687600.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:40.097Z,1516687600.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:40.488Z,1516687600.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:40.502Z,1516687600.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:40.888Z,1516687600.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:40.903Z,1516687600.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:41.288Z,1516687601.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:41.303Z,1516687601.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:41.673Z,1516687601.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:41.696Z,1516687601.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:42.078Z,1516687602.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:42.092Z,1516687602.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:42.476Z,1516687602.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:42.496Z,1516687602.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:42.885Z,1516687602.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:42.900Z,1516687602.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:43.288Z,1516687603.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:43.309Z,1516687603.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:43.688Z,1516687603.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:43.703Z,1516687603.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:44.085Z,1516687604.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:44.108Z,1516687604.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:44.479Z,1516687604.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:44.493Z,1516687604.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:44.878Z,1516687604.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:44.892Z,1516687604.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:45.272Z,1516687605.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:45.304Z,1516687605.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:45.679Z,1516687605.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:45.693Z,1516687605.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:46.072Z,1516687606.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:46.095Z,1516687606.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:46.487Z,1516687606.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:46.502Z,1516687606.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:46.891Z,1516687606.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:46.912Z,1516687606.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:47.291Z,1516687607.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:47.306Z,1516687607.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:47.677Z,1516687607.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:47.697Z,1516687607.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:48.078Z,1516687608.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:48.096Z,1516687608.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:48.483Z,1516687608.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:48.498Z,1516687608.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:48.869Z,1516687608.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:48.901Z,1516687608.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:49.287Z,1516687609.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:49.309Z,1516687609.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:49.692Z,1516687609.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:49.706Z,1516687609.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:50.088Z,1516687610.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:50.102Z,1516687610.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:50.469Z,1516687610.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:50.505Z,1516687610.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:50.880Z,1516687610.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:50.899Z,1516687610.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:51.269Z,1516687611.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:51.300Z,1516687611.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:51.670Z,1516687611.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:51.697Z,1516687611.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:52.082Z,1516687612.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:52.096Z,1516687612.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:52.484Z,1516687612.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:52.511Z,1516687612.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:52.893Z,1516687612.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:52.906Z,1516687612.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:53.288Z,1516687613.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:53.302Z,1516687613.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:53.669Z,1516687613.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:53.704Z,1516687613.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:54.069Z,1516687614.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:54.101Z,1516687614.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:54.469Z,1516687614.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:54.501Z,1516687614.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:54.869Z,1516687614.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:54.905Z,1516687614.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:55.284Z,1516687615.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:55.307Z,1516687615.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:55.690Z,1516687615.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:55.721Z,1516687615.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:56.081Z,1516687616.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:56.113Z,1516687616.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:59.233Z,1516687619.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:59.265Z,1516687619.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:59.360Z,1516687619.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:59.404Z,1516687619.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:06:59.728Z,1516687619.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:06:59.752Z,1516687619.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:00.132Z,1516687620.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:00.160Z,1516687620.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:00.528Z,1516687620.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:00.554Z,1516687620.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:00.921Z,1516687620.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:00.957Z,1516687620.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:01.313Z,1516687621.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:01.329Z,1516687621.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:01.718Z,1516687621.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:01.733Z,1516687621.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:02.114Z,1516687622.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:02.133Z,1516687622.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:02.520Z,1516687622.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:02.540Z,1516687622.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:02.932Z,1516687622.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:02.946Z,1516687622.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:03.324Z,1516687623.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:03.338Z,1516687623.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:03.718Z,1516687623.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:03.732Z,1516687623.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:04.117Z,1516687624.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:04.131Z,1516687624.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:04.516Z,1516687624.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:04.535Z,1516687624.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:04.918Z,1516687624.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:04.932Z,1516687624.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:05.323Z,1516687625.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:05.337Z,1516687625.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:05.724Z,1516687625.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:05.738Z,1516687625.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:06.124Z,1516687626.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:06.137Z,1516687626.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:06.518Z,1516687626.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:06.532Z,1516687626.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:06.917Z,1516687626.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:06.932Z,1516687626.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:07.318Z,1516687627.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:07.350Z,1516687627.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:07.723Z,1516687627.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:07.737Z,1516687627.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:08.116Z,1516687628.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:08.135Z,1516687628.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:08.524Z,1516687628.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:08.544Z,1516687628.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:08.928Z,1516687628.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:08.942Z,1516687628.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:09.323Z,1516687629.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:09.337Z,1516687629.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:09.723Z,1516687629.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:09.737Z,1516687629.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:10.122Z,1516687630.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:10.137Z,1516687630.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:10.516Z,1516687630.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:10.545Z,1516687630.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:10.922Z,1516687630.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:10.937Z,1516687630.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:11.326Z,1516687631.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:11.349Z,1516687631.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:11.726Z,1516687631.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:11.741Z,1516687631.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:12.127Z,1516687632.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:12.149Z,1516687632.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:12.521Z,1516687632.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:12.541Z,1516687632.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:12.917Z,1516687632.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:12.931Z,1516687632.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:13.318Z,1516687633.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:13.336Z,1516687633.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:13.722Z,1516687633.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:13.737Z,1516687633.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:14.112Z,1516687634.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:14.135Z,1516687634.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:14.529Z,1516687634.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:14.543Z,1516687634.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:14.931Z,1516687634.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:14.945Z,1516687634.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:15.327Z,1516687635.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:15.341Z,1516687635.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:15.719Z,1516687635.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:15.740Z,1516687635.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:16.121Z,1516687636.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:16.136Z,1516687636.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:16.513Z,1516687636.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:16.535Z,1516687636.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:16.918Z,1516687636.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:16.936Z,1516687636.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:17.331Z,1516687637.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:17.345Z,1516687637.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:17.730Z,1516687637.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:17.745Z,1516687637.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:18.129Z,1516687638.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:18.142Z,1516687638.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:18.524Z,1516687638.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:18.538Z,1516687638.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:18.912Z,1516687638.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:18.945Z,1516687638.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:19.323Z,1516687639.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:19.337Z,1516687639.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:19.723Z,1516687639.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:19.737Z,1516687639.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:20.109Z,1516687640.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:20.145Z,1516687640.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:20.530Z,1516687640.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:20.549Z,1516687640.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:20.931Z,1516687640.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:20.945Z,1516687640.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:21.336Z,1516687641.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:21.350Z,1516687641.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:21.727Z,1516687641.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:21.741Z,1516687641.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:22.108Z,1516687642.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:22.134Z,1516687642.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:22.511Z,1516687642.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:22.537Z,1516687642.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:22.910Z,1516687642.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:22.943Z,1516687642.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:23.324Z,1516687643.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:23.351Z,1516687643.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:23.728Z,1516687643.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:23.750Z,1516687643.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:24.131Z,1516687644.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:24.145Z,1516687644.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:24.509Z,1516687644.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:24.541Z,1516687644.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:24.917Z,1516687644.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:24.949Z,1516687644.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:25.317Z,1516687645.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:25.346Z,1516687645.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:25.710Z,1516687645.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:25.746Z,1516687645.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:26.109Z,1516687646.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:26.136Z,1516687646.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:26.520Z,1516687646.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:26.553Z,1516687646.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:26.924Z,1516687646.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:26.959Z,1516687646.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:27.321Z,1516687647.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:27.350Z,1516687647.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:27.718Z,1516687647.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:27.732Z,1516687647.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:28.109Z,1516687648.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:28.125Z,1516687648.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:28.515Z,1516687648.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:28.529Z,1516687648.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:28.914Z,1516687648.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:28.944Z,1516687648.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:29.322Z,1516687649.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:29.337Z,1516687649.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:29.724Z,1516687649.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:29.739Z,1516687649.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:30.123Z,1516687650.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:30.137Z,1516687650.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:30.512Z,1516687650.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:30.532Z,1516687650.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:30.917Z,1516687650.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:30.931Z,1516687650.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:31.318Z,1516687651.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:31.332Z,1516687651.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:31.718Z,1516687651.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:31.732Z,1516687651.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:32.116Z,1516687652.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:32.131Z,1516687652.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:32.523Z,1516687652.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:32.537Z,1516687652.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:32.922Z,1516687652.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:32.941Z,1516687652.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:33.322Z,1516687653.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:33.341Z,1516687653.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:33.718Z,1516687653.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:33.732Z,1516687653.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:34.117Z,1516687654.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:34.131Z,1516687654.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:34.516Z,1516687654.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:34.534Z,1516687654.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:34.918Z,1516687654.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:34.932Z,1516687654.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:35.322Z,1516687655.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:35.341Z,1516687655.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:35.728Z,1516687655.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:35.742Z,1516687655.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:36.123Z,1516687656.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:36.137Z,1516687656.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:36.517Z,1516687656.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:36.531Z,1516687656.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:36.917Z,1516687656.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:36.931Z,1516687656.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:37.318Z,1516687657.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:37.332Z,1516687657.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:37.712Z,1516687657.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:37.739Z,1516687657.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:38.112Z,1516687658.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:38.134Z,1516687658.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:38.531Z,1516687658.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:38.545Z,1516687658.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:38.927Z,1516687658.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:38.941Z,1516687658.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:39.327Z,1516687659.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:39.341Z,1516687659.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:39.716Z,1516687659.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:39.740Z,1516687659.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:40.111Z,1516687660.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:40.133Z,1516687660.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:40.510Z,1516687660.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:40.536Z,1516687660.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:40.909Z,1516687660.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:40.944Z,1516687660.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:41.324Z,1516687661.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:41.351Z,1516687661.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:41.735Z,1516687661.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:41.750Z,1516687661.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:42.123Z,1516687662.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:42.162Z,1516687662.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:42.507Z,1516687662.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:42.533Z,1516687662.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:42.909Z,1516687662.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:42.940Z,1516687662.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:43.309Z,1516687663.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:43.342Z,1516687663.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:43.710Z,1516687663.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:43.741Z,1516687663.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:44.113Z,1516687664.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:44.144Z,1516687664.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:44.520Z,1516687664.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:44.553Z,1516687664.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:44.920Z,1516687664.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:44.953Z,1516687664.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:45.332Z,1516687665.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:45.346Z,1516687665.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:45.709Z,1516687665.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:45.746Z,1516687665.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:46.107Z,1516687666.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:46.121Z,1516687666.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:46.510Z,1516687666.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:46.524Z,1516687666.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:46.909Z,1516687666.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:46.923Z,1516687666.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:47.324Z,1516687667.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:47.355Z,1516687667.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:47.728Z,1516687667.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:47.758Z,1516687667.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:48.127Z,1516687668.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:48.141Z,1516687668.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:48.519Z,1516687668.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:48.541Z,1516687668.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:48.916Z,1516687668.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:48.935Z,1516687668.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:49.319Z,1516687669.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:49.333Z,1516687669.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:49.715Z,1516687669.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:49.737Z,1516687669.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:50.116Z,1516687670.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:50.145Z,1516687670.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:50.530Z,1516687670.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:50.544Z,1516687670.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:50.928Z,1516687670.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:50.942Z,1516687670.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:51.328Z,1516687671.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:51.342Z,1516687671.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:51.709Z,1516687671.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:51.745Z,1516687671.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:52.107Z,1516687672.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:52.138Z,1516687672.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:52.510Z,1516687672.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:52.536Z,1516687672.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:52.909Z,1516687672.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:52.945Z,1516687672.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:53.324Z,1516687673.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:53.356Z,1516687673.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:53.732Z,1516687673.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:53.746Z,1516687673.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:54.127Z,1516687674.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:54.141Z,1516687674.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:54.507Z,1516687674.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:54.533Z,1516687674.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:54.913Z,1516687674.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:54.945Z,1516687674.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:54.949Z,1516687674.949 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:02:54.5Z 2018-01-23T06:07:54.949Z,1516687674.949 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:07:54.949Z,1516687674.949 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:07:55.309Z,1516687675.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:55.346Z,1516687675.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:55.837Z,1516687675.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:55.851Z,1516687675.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:56.110Z,1516687676.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:56.145Z,1516687676.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:59.220Z,1516687679.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:59.252Z,1516687679.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:59.312Z,1516687679.312 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0068.lzma 2018-01-23T06:07:59.353Z,1516687679.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:59.377Z,1516687679.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:07:59.720Z,1516687679.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:07:59.753Z,1516687679.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:00.077Z,1516687680.077 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0068.lzma.bak 2018-01-23T06:08:00.077Z,1516687680.077 [DataOverHttps](INFO): SBD MOMSN=7755110 2018-01-23T06:08:00.107Z,1516687680.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:00.148Z,1516687680.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:00.731Z,1516687680.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:00.761Z,1516687680.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:00.907Z,1516687680.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:00.921Z,1516687680.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:04.014Z,1516687684.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:04.028Z,1516687684.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:04.141Z,1516687684.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:04.185Z,1516687684.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:04.489Z,1516687684.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:04.512Z,1516687684.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:04.882Z,1516687684.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:04.916Z,1516687684.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:05.271Z,1516687685.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:05.285Z,1516687685.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:05.678Z,1516687685.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:05.693Z,1516687685.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:08.800Z,1516687688.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:08.825Z,1516687688.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:08.899Z,1516687688.899 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0069.lzma 2018-01-23T06:08:08.941Z,1516687688.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:08.969Z,1516687688.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:09.288Z,1516687689.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:09.302Z,1516687689.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:09.649Z,1516687689.649 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0069.lzma.bak 2018-01-23T06:08:09.649Z,1516687689.649 [DataOverHttps](INFO): SBD MOMSN=7755113 2018-01-23T06:08:09.689Z,1516687689.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:09.716Z,1516687689.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:10.302Z,1516687690.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:10.326Z,1516687690.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:10.329Z,1516687690.329 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:08:10.329Z,1516687690.329 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:08:10.329Z,1516687690.329 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:08:10.472Z,1516687690.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:10.505Z,1516687690.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:13.574Z,1516687693.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:13.589Z,1516687693.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:13.704Z,1516687693.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:13.735Z,1516687693.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:14.048Z,1516687694.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:14.062Z,1516687694.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:14.452Z,1516687694.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:14.469Z,1516687694.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:14.846Z,1516687694.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:14.861Z,1516687694.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:15.245Z,1516687695.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:15.265Z,1516687695.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:15.641Z,1516687695.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:15.655Z,1516687695.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:16.041Z,1516687696.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:16.055Z,1516687696.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:16.449Z,1516687696.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:16.468Z,1516687696.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:16.856Z,1516687696.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:16.873Z,1516687696.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:17.251Z,1516687697.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:17.266Z,1516687697.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:17.636Z,1516687697.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:17.667Z,1516687697.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:18.044Z,1516687698.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:18.059Z,1516687698.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:18.453Z,1516687698.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:18.469Z,1516687698.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:18.850Z,1516687698.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:18.864Z,1516687698.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:19.253Z,1516687699.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:19.267Z,1516687699.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:19.653Z,1516687699.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:19.676Z,1516687699.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:20.059Z,1516687700.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:20.073Z,1516687700.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:20.459Z,1516687700.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:20.474Z,1516687700.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:20.834Z,1516687700.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:20.860Z,1516687700.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:21.250Z,1516687701.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:21.276Z,1516687701.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:21.662Z,1516687701.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:21.681Z,1516687701.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:22.048Z,1516687702.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:22.070Z,1516687702.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:22.437Z,1516687702.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:22.469Z,1516687702.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:22.837Z,1516687702.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:22.875Z,1516687702.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:23.233Z,1516687703.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:23.267Z,1516687703.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:23.664Z,1516687703.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:23.679Z,1516687703.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:24.064Z,1516687704.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:24.109Z,1516687704.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:24.454Z,1516687704.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:24.469Z,1516687704.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:24.834Z,1516687704.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:24.865Z,1516687704.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:25.238Z,1516687705.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:25.266Z,1516687705.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:25.638Z,1516687705.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:25.673Z,1516687705.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:26.035Z,1516687706.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:26.125Z,1516687706.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:26.454Z,1516687706.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:26.469Z,1516687706.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:26.852Z,1516687706.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:26.879Z,1516687706.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:27.263Z,1516687707.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:27.278Z,1516687707.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:27.634Z,1516687707.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:27.665Z,1516687707.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:28.035Z,1516687708.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:28.069Z,1516687708.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:28.436Z,1516687708.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:28.461Z,1516687708.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:28.855Z,1516687708.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:28.870Z,1516687708.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:29.233Z,1516687709.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:29.265Z,1516687709.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:29.649Z,1516687709.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:29.664Z,1516687709.664 [PNI_TCM](ERROR): CRC does not match. Expected:0x27571 got:0x33973 2018-01-23T06:08:29.689Z,1516687709.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:30.061Z,1516687710.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:30.081Z,1516687710.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:30.460Z,1516687710.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:30.481Z,1516687710.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:30.833Z,1516687710.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:30.869Z,1516687710.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:31.235Z,1516687711.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:31.255Z,1516687711.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x64422 got:0x33256 2018-01-23T06:08:31.278Z,1516687711.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:31.636Z,1516687711.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:31.650Z,1516687711.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:32.041Z,1516687712.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:32.076Z,1516687712.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:32.446Z,1516687712.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:32.476Z,1516687712.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:32.853Z,1516687712.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:32.885Z,1516687712.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:33.265Z,1516687713.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:33.280Z,1516687713.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:33.637Z,1516687713.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:33.651Z,1516687713.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:34.038Z,1516687714.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:34.088Z,1516687714.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:34.445Z,1516687714.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:34.451Z,1516687714.451 [PNI_TCM](ERROR): CRC does not match. Expected:0x6460 got:0x33297 2018-01-23T06:08:34.492Z,1516687714.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:34.846Z,1516687714.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:34.876Z,1516687714.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:35.246Z,1516687715.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:35.260Z,1516687715.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:35.658Z,1516687715.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:35.686Z,1516687715.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:36.055Z,1516687716.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:36.078Z,1516687716.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:36.447Z,1516687716.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:36.461Z,1516687716.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:36.839Z,1516687716.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:36.862Z,1516687716.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:37.243Z,1516687717.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:37.273Z,1516687717.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:37.648Z,1516687717.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:37.656Z,1516687717.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T06:08:37.691Z,1516687717.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:38.045Z,1516687718.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:38.065Z,1516687718.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:38.451Z,1516687718.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:38.472Z,1516687718.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:38.851Z,1516687718.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:38.891Z,1516687718.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:39.252Z,1516687719.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:39.258Z,1516687719.258 [PNI_TCM](ERROR): CRC does not match. Expected:0x53023 got:0x51584 2018-01-23T06:08:39.296Z,1516687719.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:39.647Z,1516687719.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:39.661Z,1516687719.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:40.037Z,1516687720.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:40.065Z,1516687720.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:40.445Z,1516687720.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:40.485Z,1516687720.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:40.834Z,1516687720.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:40.856Z,1516687720.856 [PNI_TCM](ERROR): CRC does not match. Expected:0x35207 got:0x6466 2018-01-23T06:08:40.873Z,1516687720.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:41.233Z,1516687721.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:41.265Z,1516687721.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:41.649Z,1516687721.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:41.681Z,1516687721.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:42.063Z,1516687722.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:42.078Z,1516687722.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:42.444Z,1516687722.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:42.481Z,1516687722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:42.839Z,1516687722.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:42.872Z,1516687722.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:43.244Z,1516687723.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:43.257Z,1516687723.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:43.637Z,1516687723.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:43.681Z,1516687723.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:44.045Z,1516687724.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:44.083Z,1516687724.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:44.451Z,1516687724.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:44.465Z,1516687724.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:44.850Z,1516687724.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:44.869Z,1516687724.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:45.248Z,1516687725.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:45.287Z,1516687725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:45.642Z,1516687725.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:45.659Z,1516687725.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:46.046Z,1516687726.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:46.063Z,1516687726.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:46.439Z,1516687726.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:46.467Z,1516687726.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:46.843Z,1516687726.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:46.873Z,1516687726.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:47.245Z,1516687727.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:47.267Z,1516687727.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:47.656Z,1516687727.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:47.671Z,1516687727.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:48.053Z,1516687728.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:48.067Z,1516687728.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:48.450Z,1516687728.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:48.490Z,1516687728.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:48.836Z,1516687728.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:48.854Z,1516687728.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:49.243Z,1516687729.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:49.260Z,1516687729.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:49.638Z,1516687729.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:49.666Z,1516687729.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:50.045Z,1516687730.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:50.082Z,1516687730.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:50.453Z,1516687730.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:50.471Z,1516687730.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:50.857Z,1516687730.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:50.872Z,1516687730.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:51.252Z,1516687731.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:51.273Z,1516687731.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:51.640Z,1516687731.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:51.665Z,1516687731.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:52.040Z,1516687732.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:52.059Z,1516687732.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:52.436Z,1516687732.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:52.473Z,1516687732.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:52.849Z,1516687732.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:52.864Z,1516687732.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:53.244Z,1516687733.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:53.284Z,1516687733.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:53.653Z,1516687733.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:53.670Z,1516687733.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:54.058Z,1516687734.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:54.074Z,1516687734.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:54.454Z,1516687734.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:54.469Z,1516687734.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:54.833Z,1516687734.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:54.873Z,1516687734.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:55.246Z,1516687735.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:55.260Z,1516687735.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:55.646Z,1516687735.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:55.664Z,1516687735.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:56.033Z,1516687736.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:56.071Z,1516687736.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:56.457Z,1516687736.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:56.471Z,1516687736.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:56.859Z,1516687736.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:56.876Z,1516687736.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:57.252Z,1516687737.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:57.271Z,1516687737.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:57.633Z,1516687737.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:57.677Z,1516687737.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:58.033Z,1516687738.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:58.065Z,1516687738.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:58.453Z,1516687738.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:58.468Z,1516687738.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:58.846Z,1516687738.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:58.860Z,1516687738.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:59.234Z,1516687739.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:59.280Z,1516687739.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:08:59.657Z,1516687739.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:08:59.672Z,1516687739.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:00.058Z,1516687740.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:00.072Z,1516687740.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:00.452Z,1516687740.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:00.476Z,1516687740.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:00.833Z,1516687740.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:00.868Z,1516687740.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:01.233Z,1516687741.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:01.266Z,1516687741.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:01.638Z,1516687741.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:01.665Z,1516687741.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:02.033Z,1516687742.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:02.059Z,1516687742.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:02.451Z,1516687742.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:02.484Z,1516687742.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:02.860Z,1516687742.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:02.881Z,1516687742.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:03.252Z,1516687743.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:03.274Z,1516687743.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:03.633Z,1516687743.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:03.660Z,1516687743.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:04.033Z,1516687744.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:04.058Z,1516687744.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:04.433Z,1516687744.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:04.475Z,1516687744.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:04.838Z,1516687744.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:04.864Z,1516687744.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:05.233Z,1516687745.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:05.265Z,1516687745.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:05.652Z,1516687745.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:05.670Z,1516687745.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:06.056Z,1516687746.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:06.071Z,1516687746.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:06.452Z,1516687746.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:06.466Z,1516687746.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:06.833Z,1516687746.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:06.869Z,1516687746.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:07.237Z,1516687747.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:07.264Z,1516687747.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:07.638Z,1516687747.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:07.664Z,1516687747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:08.033Z,1516687748.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:08.064Z,1516687748.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:08.453Z,1516687748.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:08.468Z,1516687748.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:08.854Z,1516687748.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:08.883Z,1516687748.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:09.244Z,1516687749.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:09.269Z,1516687749.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:09.633Z,1516687749.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:09.670Z,1516687749.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:10.037Z,1516687750.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:10.069Z,1516687750.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:10.433Z,1516687750.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:10.469Z,1516687750.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:10.834Z,1516687750.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:10.870Z,1516687750.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:13.942Z,1516687753.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:13.965Z,1516687753.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:14.072Z,1516687754.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:14.121Z,1516687754.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:14.432Z,1516687754.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:14.446Z,1516687754.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:14.833Z,1516687754.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:14.847Z,1516687754.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:15.216Z,1516687755.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:15.237Z,1516687755.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:15.612Z,1516687755.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:15.649Z,1516687755.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.023Z,1516687756.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:16.038Z,1516687756.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.424Z,1516687756.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:16.451Z,1516687756.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.833Z,1516687756.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:16.848Z,1516687756.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.848Z,1516687756.848 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-01-23T06:09:16.848Z,1516687756.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:09:16.850Z,1516687756.850 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.850Z,1516687756.850 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-01-23T06:09:16.850Z,1516687756.850 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:09:16.852Z,1516687756.852 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:16.852Z,1516687756.852 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58 2018-01-23T06:09:16.852Z,1516687756.852 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:09:16.864Z,1516687756.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:09:16.864Z,1516687756.864 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:09:16.864Z,1516687756.864 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:09:17.231Z,1516687757.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:17.256Z,1516687757.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:09:17.256Z,1516687757.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-01-23T06:09:17.256Z,1516687757.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:09:17.256Z,1516687757.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-01-23T06:09:17.257Z,1516687757.257 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:09:17.257Z,1516687757.257 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58 2018-01-23T06:09:17.609Z,1516687757.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:17.644Z,1516687757.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:09:17.644Z,1516687757.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:09:17.645Z,1516687757.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:09:17.645Z,1516687757.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:09:17.645Z,1516687757.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:09:17.646Z,1516687757.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:09:17.646Z,1516687757.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:09:17.646Z,1516687757.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:09:17.652Z,1516687757.652 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:09:18.009Z,1516687758.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:18.029Z,1516687758.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:09:18.030Z,1516687758.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:18.417Z,1516687758.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:18.431Z,1516687758.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:09:18.432Z,1516687758.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:18.813Z,1516687758.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:18.833Z,1516687758.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:09:18.834Z,1516687758.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:19.214Z,1516687759.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:19.236Z,1516687759.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:09:19.237Z,1516687759.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:19.620Z,1516687759.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:19.634Z,1516687759.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:09:19.635Z,1516687759.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:20.032Z,1516687760.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:20.046Z,1516687760.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:09:20.063Z,1516687760.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:20.424Z,1516687760.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:20.438Z,1516687760.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:09:20.439Z,1516687760.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:20.818Z,1516687760.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:20.831Z,1516687760.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:09:20.832Z,1516687760.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:21.217Z,1516687761.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:21.231Z,1516687761.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:09:21.232Z,1516687761.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:21.616Z,1516687761.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:21.634Z,1516687761.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:09:21.635Z,1516687761.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:22.018Z,1516687762.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:22.032Z,1516687762.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:09:22.033Z,1516687762.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:22.422Z,1516687762.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:22.440Z,1516687762.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:09:22.441Z,1516687762.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:22.824Z,1516687762.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:22.838Z,1516687762.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:09:22.839Z,1516687762.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:23.223Z,1516687763.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:23.244Z,1516687763.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:09:23.245Z,1516687763.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:23.621Z,1516687763.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:23.640Z,1516687763.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:09:23.641Z,1516687763.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:24.021Z,1516687764.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:24.040Z,1516687764.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:09:24.041Z,1516687764.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:24.418Z,1516687764.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:24.431Z,1516687764.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:09:24.432Z,1516687764.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:24.814Z,1516687764.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:24.834Z,1516687764.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:09:24.836Z,1516687764.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:25.212Z,1516687765.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:25.230Z,1516687765.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:09:25.235Z,1516687765.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:25.629Z,1516687765.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:25.643Z,1516687765.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:09:25.644Z,1516687765.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:26.030Z,1516687766.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:26.048Z,1516687766.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:09:26.049Z,1516687766.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:26.427Z,1516687766.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:26.441Z,1516687766.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:09:26.442Z,1516687766.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:26.819Z,1516687766.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:26.840Z,1516687766.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:09:26.841Z,1516687766.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:27.221Z,1516687767.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:27.240Z,1516687767.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:09:27.241Z,1516687767.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:27.613Z,1516687767.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:27.635Z,1516687767.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:09:27.636Z,1516687767.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:28.019Z,1516687768.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:28.040Z,1516687768.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:09:28.041Z,1516687768.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:28.431Z,1516687768.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:28.445Z,1516687768.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:09:28.446Z,1516687768.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:28.831Z,1516687768.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:28.844Z,1516687768.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:09:28.845Z,1516687768.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:29.227Z,1516687769.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:29.253Z,1516687769.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:09:29.253Z,1516687769.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:29.625Z,1516687769.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:29.645Z,1516687769.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:09:29.646Z,1516687769.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:30.009Z,1516687770.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:30.040Z,1516687770.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:09:30.041Z,1516687770.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:30.409Z,1516687770.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:30.444Z,1516687770.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:09:30.445Z,1516687770.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:30.814Z,1516687770.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:30.839Z,1516687770.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:09:30.840Z,1516687770.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:31.209Z,1516687771.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:31.240Z,1516687771.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:09:31.241Z,1516687771.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:31.627Z,1516687771.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:31.647Z,1516687771.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:09:31.647Z,1516687771.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:32.032Z,1516687772.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:32.046Z,1516687772.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:09:32.047Z,1516687772.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:32.424Z,1516687772.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:32.453Z,1516687772.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:09:32.454Z,1516687772.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:32.809Z,1516687772.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:32.842Z,1516687772.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:09:32.843Z,1516687772.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:33.209Z,1516687773.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:33.234Z,1516687773.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:09:33.235Z,1516687773.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:33.610Z,1516687773.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:33.641Z,1516687773.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:09:33.642Z,1516687773.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:34.010Z,1516687774.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:34.048Z,1516687774.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:09:34.049Z,1516687774.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:34.429Z,1516687774.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:34.442Z,1516687774.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:09:34.444Z,1516687774.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:34.828Z,1516687774.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:34.850Z,1516687774.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:09:34.863Z,1516687774.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:35.234Z,1516687775.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:35.252Z,1516687775.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:09:35.253Z,1516687775.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:35.615Z,1516687775.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:35.643Z,1516687775.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:09:35.644Z,1516687775.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:36.008Z,1516687776.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:36.045Z,1516687776.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:09:36.046Z,1516687776.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:36.421Z,1516687776.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:36.460Z,1516687776.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:09:36.461Z,1516687776.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:36.833Z,1516687776.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:36.847Z,1516687776.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:09:36.848Z,1516687776.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:37.220Z,1516687777.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:37.257Z,1516687777.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:37.614Z,1516687777.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:37.644Z,1516687777.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:38.009Z,1516687778.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:38.029Z,1516687778.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:38.428Z,1516687778.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:38.455Z,1516687778.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:38.828Z,1516687778.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:38.862Z,1516687778.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:39.228Z,1516687779.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:39.254Z,1516687779.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:39.616Z,1516687779.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:39.630Z,1516687779.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:40.021Z,1516687780.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:40.035Z,1516687780.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:40.432Z,1516687780.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:40.453Z,1516687780.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:40.828Z,1516687780.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:40.858Z,1516687780.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:41.224Z,1516687781.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:41.238Z,1516687781.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:41.616Z,1516687781.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:41.631Z,1516687781.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:42.015Z,1516687782.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:42.037Z,1516687782.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:42.424Z,1516687782.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:42.438Z,1516687782.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:42.828Z,1516687782.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:42.842Z,1516687782.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:43.221Z,1516687783.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:43.241Z,1516687783.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:43.619Z,1516687783.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:43.632Z,1516687783.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:44.017Z,1516687784.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:44.031Z,1516687784.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:44.422Z,1516687784.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:44.441Z,1516687784.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:44.824Z,1516687784.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:44.838Z,1516687784.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:45.224Z,1516687785.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:45.239Z,1516687785.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:45.616Z,1516687785.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:45.634Z,1516687785.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:46.018Z,1516687786.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:46.032Z,1516687786.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:46.422Z,1516687786.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:46.441Z,1516687786.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:46.824Z,1516687786.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:46.838Z,1516687786.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:47.223Z,1516687787.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:47.237Z,1516687787.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:47.616Z,1516687787.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:47.635Z,1516687787.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:48.017Z,1516687788.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:48.031Z,1516687788.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:48.424Z,1516687788.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:48.444Z,1516687788.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:48.828Z,1516687788.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:48.842Z,1516687788.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:49.236Z,1516687789.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:49.250Z,1516687789.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:49.617Z,1516687789.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:49.632Z,1516687789.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:50.012Z,1516687790.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:50.038Z,1516687790.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:50.432Z,1516687790.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:50.447Z,1516687790.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:50.834Z,1516687790.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:50.848Z,1516687790.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:51.232Z,1516687791.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:51.253Z,1516687791.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:51.611Z,1516687791.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:51.645Z,1516687791.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:52.014Z,1516687792.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:52.042Z,1516687792.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:52.424Z,1516687792.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:52.447Z,1516687792.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:52.843Z,1516687792.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:52.857Z,1516687792.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:53.235Z,1516687793.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:53.249Z,1516687793.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:53.611Z,1516687793.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:53.640Z,1516687793.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:54.010Z,1516687794.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:54.045Z,1516687794.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:54.436Z,1516687794.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:54.450Z,1516687794.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:54.820Z,1516687794.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:54.855Z,1516687794.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:55.220Z,1516687795.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:55.259Z,1516687795.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:55.618Z,1516687795.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:55.632Z,1516687795.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:56.014Z,1516687796.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:56.033Z,1516687796.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:56.424Z,1516687796.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:56.439Z,1516687796.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:56.832Z,1516687796.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:56.846Z,1516687796.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:57.220Z,1516687797.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:57.255Z,1516687797.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:57.610Z,1516687797.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:57.645Z,1516687797.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:58.008Z,1516687798.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:58.045Z,1516687798.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:58.420Z,1516687798.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:58.455Z,1516687798.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:58.832Z,1516687798.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:58.849Z,1516687798.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:59.220Z,1516687799.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:59.249Z,1516687799.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:09:59.610Z,1516687799.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:09:59.644Z,1516687799.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:00.008Z,1516687800.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:00.025Z,1516687800.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:00.420Z,1516687800.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:00.455Z,1516687800.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:00.828Z,1516687800.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:00.853Z,1516687800.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:01.220Z,1516687801.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:01.250Z,1516687801.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:01.618Z,1516687801.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:01.632Z,1516687801.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:02.010Z,1516687802.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:02.029Z,1516687802.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:02.432Z,1516687802.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:02.456Z,1516687802.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:02.836Z,1516687802.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:02.860Z,1516687802.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:03.224Z,1516687803.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:03.238Z,1516687803.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:03.619Z,1516687803.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:03.633Z,1516687803.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:04.017Z,1516687804.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:04.030Z,1516687804.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:04.428Z,1516687804.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:04.442Z,1516687804.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:04.824Z,1516687804.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:04.838Z,1516687804.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:05.220Z,1516687805.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:05.240Z,1516687805.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:05.619Z,1516687805.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:05.633Z,1516687805.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:06.017Z,1516687806.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:06.031Z,1516687806.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:06.423Z,1516687806.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:06.444Z,1516687806.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:06.824Z,1516687806.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:06.838Z,1516687806.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:07.222Z,1516687807.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:07.241Z,1516687807.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:07.619Z,1516687807.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:07.633Z,1516687807.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:08.017Z,1516687808.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:08.031Z,1516687808.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:08.436Z,1516687808.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:08.466Z,1516687808.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:08.824Z,1516687808.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:08.838Z,1516687808.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:09.223Z,1516687809.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:09.245Z,1516687809.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:09.623Z,1516687809.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:09.637Z,1516687809.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:10.018Z,1516687810.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:10.032Z,1516687810.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:10.423Z,1516687810.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:10.441Z,1516687810.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:10.824Z,1516687810.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:10.838Z,1516687810.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:11.224Z,1516687811.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:11.238Z,1516687811.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:14.320Z,1516687814.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:14.341Z,1516687814.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:14.436Z,1516687814.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:14.480Z,1516687814.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:14.825Z,1516687814.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:14.839Z,1516687814.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:15.227Z,1516687815.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:15.242Z,1516687815.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:15.624Z,1516687815.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:15.638Z,1516687815.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:16.013Z,1516687816.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:16.028Z,1516687816.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:16.414Z,1516687816.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:16.429Z,1516687816.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:16.808Z,1516687816.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:16.841Z,1516687816.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:17.213Z,1516687817.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:17.227Z,1516687817.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:17.588Z,1516687817.588 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T06:10:17.588Z,1516687817.588 [NAL9602] Data Fault, FailCount= 1 2018-01-23T06:10:17.588Z,1516687817.588 [NAL9602](ERROR): Data Fault 2018-01-23T06:10:17.622Z,1516687817.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:17.644Z,1516687817.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:17.665Z,1516687817.665 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T06:10:17.988Z,1516687817.988 [NAL9602](INFO): Powering down 2018-01-23T06:10:18.009Z,1516687818.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:18.041Z,1516687818.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:18.417Z,1516687818.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:18.431Z,1516687818.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:18.817Z,1516687818.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:18.831Z,1516687818.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:18.844Z,1516687818.844 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:10:18.844Z,1516687818.844 [NAL9602] No Fault, FailCount= 1 2018-01-23T06:10:19.205Z,1516687819.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:19.236Z,1516687819.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:19.605Z,1516687819.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:19.640Z,1516687819.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:20.002Z,1516687820.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:20.037Z,1516687820.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:20.409Z,1516687820.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:20.434Z,1516687820.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:20.805Z,1516687820.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:20.839Z,1516687820.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:21.202Z,1516687821.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:21.229Z,1516687821.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:21.604Z,1516687821.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:21.634Z,1516687821.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:22.005Z,1516687822.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:22.043Z,1516687822.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:22.402Z,1516687822.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:22.417Z,1516687822.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:22.805Z,1516687822.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:22.825Z,1516687822.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:23.213Z,1516687823.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:23.227Z,1516687823.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:23.610Z,1516687823.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:23.624Z,1516687823.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:24.009Z,1516687824.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:24.036Z,1516687824.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:24.412Z,1516687824.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:24.426Z,1516687824.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:24.815Z,1516687824.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:24.829Z,1516687824.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:25.211Z,1516687825.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:25.229Z,1516687825.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:25.612Z,1516687825.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:25.626Z,1516687825.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:26.011Z,1516687826.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:26.026Z,1516687826.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:26.414Z,1516687826.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:26.433Z,1516687826.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:26.812Z,1516687826.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:26.826Z,1516687826.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:27.211Z,1516687827.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:27.226Z,1516687827.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:27.613Z,1516687827.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:27.633Z,1516687827.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:28.013Z,1516687828.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:28.026Z,1516687828.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:28.414Z,1516687828.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:28.429Z,1516687828.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:28.814Z,1516687828.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:28.833Z,1516687828.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:29.213Z,1516687829.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:29.227Z,1516687829.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:29.611Z,1516687829.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:29.626Z,1516687829.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:30.013Z,1516687830.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:30.027Z,1516687830.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:30.413Z,1516687830.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:30.432Z,1516687830.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:30.814Z,1516687830.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:30.829Z,1516687830.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:31.212Z,1516687831.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:31.233Z,1516687831.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:31.614Z,1516687831.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:31.629Z,1516687831.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:32.012Z,1516687832.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:32.028Z,1516687832.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:32.412Z,1516687832.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:32.426Z,1516687832.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:32.813Z,1516687832.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:32.827Z,1516687832.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:33.210Z,1516687833.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:33.224Z,1516687833.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:33.612Z,1516687833.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:33.626Z,1516687833.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:34.012Z,1516687834.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:34.026Z,1516687834.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:34.410Z,1516687834.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:34.425Z,1516687834.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:34.811Z,1516687834.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:34.826Z,1516687834.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:35.212Z,1516687835.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:35.226Z,1516687835.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:35.610Z,1516687835.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:35.625Z,1516687835.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:36.011Z,1516687836.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:36.025Z,1516687836.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:36.413Z,1516687836.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:36.427Z,1516687836.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:36.812Z,1516687836.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:36.826Z,1516687836.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:37.211Z,1516687837.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:37.232Z,1516687837.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:37.614Z,1516687837.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:37.627Z,1516687837.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:38.008Z,1516687838.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:38.027Z,1516687838.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:38.412Z,1516687838.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:38.426Z,1516687838.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:38.813Z,1516687838.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:38.827Z,1516687838.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:39.210Z,1516687839.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:39.224Z,1516687839.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:39.612Z,1516687839.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:39.626Z,1516687839.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:40.013Z,1516687840.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:40.026Z,1516687840.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:40.410Z,1516687840.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:40.424Z,1516687840.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:40.812Z,1516687840.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:40.826Z,1516687840.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:41.213Z,1516687841.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:41.227Z,1516687841.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:41.610Z,1516687841.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:41.624Z,1516687841.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:42.011Z,1516687842.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:42.025Z,1516687842.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:42.416Z,1516687842.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:42.430Z,1516687842.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:42.816Z,1516687842.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:42.830Z,1516687842.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:43.211Z,1516687843.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:43.232Z,1516687843.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:43.612Z,1516687843.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:43.626Z,1516687843.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:44.010Z,1516687844.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:44.024Z,1516687844.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:44.412Z,1516687844.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:44.426Z,1516687844.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:44.817Z,1516687844.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:44.831Z,1516687844.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:45.210Z,1516687845.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:45.224Z,1516687845.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:45.612Z,1516687845.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:45.626Z,1516687845.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:46.017Z,1516687846.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:46.031Z,1516687846.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:46.410Z,1516687846.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:46.424Z,1516687846.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:46.812Z,1516687846.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:46.826Z,1516687846.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:47.217Z,1516687847.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:47.231Z,1516687847.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:47.610Z,1516687847.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:47.625Z,1516687847.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:48.013Z,1516687848.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:48.027Z,1516687848.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:48.392Z,1516687848.392 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:10:48.423Z,1516687848.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:48.437Z,1516687848.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:48.813Z,1516687848.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:48.828Z,1516687848.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:49.211Z,1516687849.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:49.225Z,1516687849.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:49.621Z,1516687849.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:49.635Z,1516687849.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:50.021Z,1516687850.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:50.041Z,1516687850.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:50.418Z,1516687850.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:50.436Z,1516687850.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:50.818Z,1516687850.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:50.833Z,1516687850.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:51.207Z,1516687851.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:51.230Z,1516687851.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:51.605Z,1516687851.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:51.630Z,1516687851.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:52.005Z,1516687852.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:52.039Z,1516687852.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:52.402Z,1516687852.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:52.438Z,1516687852.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:52.805Z,1516687852.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:52.831Z,1516687852.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:53.204Z,1516687853.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:53.233Z,1516687853.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:53.605Z,1516687853.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:53.631Z,1516687853.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:54.005Z,1516687854.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:54.039Z,1516687854.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:54.405Z,1516687854.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:54.442Z,1516687854.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:54.805Z,1516687854.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:54.830Z,1516687854.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:55.205Z,1516687855.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:55.237Z,1516687855.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:55.605Z,1516687855.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:55.641Z,1516687855.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:56.002Z,1516687856.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:56.029Z,1516687856.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:56.405Z,1516687856.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:56.437Z,1516687856.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:56.805Z,1516687856.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:56.841Z,1516687856.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:57.202Z,1516687857.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:57.217Z,1516687857.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:57.605Z,1516687857.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:57.621Z,1516687857.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:58.004Z,1516687858.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:58.018Z,1516687858.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:58.409Z,1516687858.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:58.423Z,1516687858.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:58.817Z,1516687858.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:58.830Z,1516687858.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:59.224Z,1516687859.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:59.257Z,1516687859.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:10:59.600Z,1516687859.600 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:10:59.617Z,1516687859.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:10:59.631Z,1516687859.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:00.010Z,1516687860.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:00.034Z,1516687860.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:00.420Z,1516687860.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:00.435Z,1516687860.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:00.820Z,1516687860.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:00.834Z,1516687860.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:01.216Z,1516687861.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:01.236Z,1516687861.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:01.614Z,1516687861.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:01.629Z,1516687861.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:02.012Z,1516687862.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:02.026Z,1516687862.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:02.415Z,1516687862.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:02.429Z,1516687862.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:02.813Z,1516687862.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:02.831Z,1516687862.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:03.219Z,1516687863.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:03.233Z,1516687863.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:03.620Z,1516687863.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:03.641Z,1516687863.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:04.020Z,1516687864.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:04.034Z,1516687864.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:04.413Z,1516687864.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:04.427Z,1516687864.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:04.815Z,1516687864.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:04.829Z,1516687864.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:05.210Z,1516687865.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:05.229Z,1516687865.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:05.616Z,1516687865.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:05.630Z,1516687865.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:06.016Z,1516687866.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:06.030Z,1516687866.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:06.417Z,1516687866.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:06.436Z,1516687866.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:06.824Z,1516687866.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:06.838Z,1516687866.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:07.244Z,1516687867.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:07.288Z,1516687867.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:07.605Z,1516687867.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:07.641Z,1516687867.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:08.009Z,1516687868.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:08.036Z,1516687868.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:08.406Z,1516687868.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:08.443Z,1516687868.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:08.805Z,1516687868.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:08.841Z,1516687868.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:09.229Z,1516687869.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:09.244Z,1516687869.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:09.629Z,1516687869.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:09.645Z,1516687869.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:10.016Z,1516687870.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:10.054Z,1516687870.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:10.409Z,1516687870.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:10.439Z,1516687870.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:10.809Z,1516687870.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:10.849Z,1516687870.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:11.204Z,1516687871.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:11.218Z,1516687871.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:11.607Z,1516687871.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:11.622Z,1516687871.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:14.710Z,1516687874.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:14.724Z,1516687874.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:14.836Z,1516687874.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:14.890Z,1516687874.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:15.220Z,1516687875.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:15.251Z,1516687875.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:15.624Z,1516687875.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:15.655Z,1516687875.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:16.005Z,1516687876.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:16.023Z,1516687876.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:16.406Z,1516687876.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:16.427Z,1516687876.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:16.809Z,1516687876.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:16.825Z,1516687876.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:17.212Z,1516687877.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:17.227Z,1516687877.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:17.616Z,1516687877.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:17.630Z,1516687877.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:18.012Z,1516687878.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:18.032Z,1516687878.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:18.409Z,1516687878.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:18.429Z,1516687878.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:18.813Z,1516687878.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:18.827Z,1516687878.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:19.210Z,1516687879.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:19.224Z,1516687879.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:19.610Z,1516687879.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:19.624Z,1516687879.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:20.009Z,1516687880.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:20.023Z,1516687880.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:20.412Z,1516687880.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:20.440Z,1516687880.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:20.820Z,1516687880.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:20.834Z,1516687880.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:21.214Z,1516687881.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:21.233Z,1516687881.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:21.610Z,1516687881.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:21.624Z,1516687881.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:22.009Z,1516687882.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:22.023Z,1516687882.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:22.405Z,1516687882.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:22.432Z,1516687882.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:22.814Z,1516687882.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:22.828Z,1516687882.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:23.219Z,1516687883.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:23.234Z,1516687883.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:23.617Z,1516687883.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:23.637Z,1516687883.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:24.020Z,1516687884.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:24.040Z,1516687884.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:24.406Z,1516687884.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:24.424Z,1516687884.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:24.818Z,1516687884.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:24.833Z,1516687884.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:25.208Z,1516687885.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:25.234Z,1516687885.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:25.604Z,1516687885.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:25.625Z,1516687885.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:26.004Z,1516687886.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:26.027Z,1516687886.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:26.421Z,1516687886.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:26.435Z,1516687886.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:26.824Z,1516687886.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:26.838Z,1516687886.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:27.220Z,1516687887.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:27.234Z,1516687887.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:27.608Z,1516687887.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:27.640Z,1516687887.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:28.003Z,1516687888.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:28.030Z,1516687888.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:28.414Z,1516687888.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:28.429Z,1516687888.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:28.801Z,1516687888.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:28.837Z,1516687888.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:29.216Z,1516687889.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:29.243Z,1516687889.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:29.624Z,1516687889.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:29.638Z,1516687889.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:30.021Z,1516687890.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:30.040Z,1516687890.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:30.399Z,1516687890.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:30.436Z,1516687890.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:30.802Z,1516687890.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:30.833Z,1516687890.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:31.202Z,1516687891.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:31.240Z,1516687891.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:31.600Z,1516687891.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:31.633Z,1516687891.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:32.001Z,1516687892.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:32.027Z,1516687892.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:32.422Z,1516687892.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:32.436Z,1516687892.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:32.824Z,1516687892.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:32.842Z,1516687892.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:33.221Z,1516687893.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:33.235Z,1516687893.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:33.601Z,1516687893.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:33.640Z,1516687893.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:33.999Z,1516687893.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:34.025Z,1516687894.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:34.402Z,1516687894.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:34.433Z,1516687894.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:34.805Z,1516687894.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:34.839Z,1516687894.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:35.212Z,1516687895.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:35.245Z,1516687895.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:35.624Z,1516687895.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:35.639Z,1516687895.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:36.012Z,1516687896.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:36.046Z,1516687896.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:36.401Z,1516687896.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:36.437Z,1516687896.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:36.801Z,1516687896.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:36.836Z,1516687896.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:37.201Z,1516687897.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:37.248Z,1516687897.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:37.600Z,1516687897.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:37.614Z,1516687897.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:38.001Z,1516687898.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:38.041Z,1516687898.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:38.416Z,1516687898.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:38.443Z,1516687898.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:38.816Z,1516687898.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:38.841Z,1516687898.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:39.212Z,1516687899.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:39.238Z,1516687899.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:39.609Z,1516687899.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:39.623Z,1516687899.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:40.003Z,1516687900.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:40.017Z,1516687900.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:40.414Z,1516687900.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:40.428Z,1516687900.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:40.809Z,1516687900.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:40.823Z,1516687900.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:41.220Z,1516687901.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:41.234Z,1516687901.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:41.616Z,1516687901.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:41.630Z,1516687901.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:42.012Z,1516687902.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:42.032Z,1516687902.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:42.406Z,1516687902.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:42.430Z,1516687902.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:42.807Z,1516687902.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:42.826Z,1516687902.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:43.209Z,1516687903.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:43.228Z,1516687903.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:43.613Z,1516687903.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:43.627Z,1516687903.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:44.011Z,1516687904.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:44.025Z,1516687904.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:44.416Z,1516687904.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:44.430Z,1516687904.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:44.816Z,1516687904.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:44.831Z,1516687904.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:45.213Z,1516687905.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:45.227Z,1516687905.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:45.609Z,1516687905.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:45.629Z,1516687905.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:46.007Z,1516687906.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:46.021Z,1516687906.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:46.409Z,1516687906.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:46.424Z,1516687906.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:46.809Z,1516687906.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:46.828Z,1516687906.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:47.212Z,1516687907.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:47.233Z,1516687907.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:47.621Z,1516687907.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:47.635Z,1516687907.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:48.016Z,1516687908.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:48.036Z,1516687908.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:48.413Z,1516687908.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:48.429Z,1516687908.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:48.809Z,1516687908.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:48.824Z,1516687908.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:49.210Z,1516687909.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:49.224Z,1516687909.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:49.608Z,1516687909.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:49.635Z,1516687909.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:50.001Z,1516687910.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:50.037Z,1516687910.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:50.425Z,1516687910.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:50.439Z,1516687910.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:50.828Z,1516687910.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:50.842Z,1516687910.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:51.216Z,1516687911.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:51.238Z,1516687911.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:51.601Z,1516687911.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:51.629Z,1516687911.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:51.999Z,1516687911.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:52.026Z,1516687912.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:52.402Z,1516687912.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:52.437Z,1516687912.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:52.801Z,1516687912.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:52.839Z,1516687912.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:53.220Z,1516687913.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:53.235Z,1516687913.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:53.621Z,1516687913.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:53.648Z,1516687913.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:54.012Z,1516687914.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:54.044Z,1516687914.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:54.401Z,1516687914.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:54.415Z,1516687914.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:54.813Z,1516687914.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:54.849Z,1516687914.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:55.205Z,1516687915.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:55.219Z,1516687915.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:55.606Z,1516687915.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:55.625Z,1516687915.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:56.010Z,1516687916.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:56.024Z,1516687916.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:56.415Z,1516687916.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:56.429Z,1516687916.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:56.816Z,1516687916.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:56.830Z,1516687916.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:57.212Z,1516687917.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:57.226Z,1516687917.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:57.608Z,1516687917.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:57.622Z,1516687917.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:58.007Z,1516687918.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:58.026Z,1516687918.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:58.408Z,1516687918.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:58.423Z,1516687918.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:58.809Z,1516687918.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:58.828Z,1516687918.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:59.212Z,1516687919.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:59.227Z,1516687919.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:11:59.616Z,1516687919.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:11:59.630Z,1516687919.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:00.012Z,1516687920.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:00.032Z,1516687920.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:00.407Z,1516687920.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:00.421Z,1516687920.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:00.809Z,1516687920.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:00.823Z,1516687920.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:01.208Z,1516687921.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:01.222Z,1516687921.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:01.606Z,1516687921.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:01.625Z,1516687921.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:02.009Z,1516687922.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:02.023Z,1516687922.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:02.428Z,1516687922.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:02.460Z,1516687922.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:02.820Z,1516687922.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:02.834Z,1516687922.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:03.214Z,1516687923.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:03.233Z,1516687923.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:03.614Z,1516687923.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:03.628Z,1516687923.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:04.010Z,1516687924.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:04.028Z,1516687924.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:04.408Z,1516687924.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:04.427Z,1516687924.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:04.810Z,1516687924.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:04.824Z,1516687924.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:05.215Z,1516687925.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:05.229Z,1516687925.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:05.628Z,1516687925.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:05.678Z,1516687925.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:06.016Z,1516687926.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:06.036Z,1516687926.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:06.407Z,1516687926.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:06.422Z,1516687926.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:06.811Z,1516687926.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:06.830Z,1516687926.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:07.214Z,1516687927.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:07.228Z,1516687927.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:07.606Z,1516687927.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:07.628Z,1516687927.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:08.006Z,1516687928.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:08.033Z,1516687928.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:08.421Z,1516687928.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:08.440Z,1516687928.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:08.819Z,1516687928.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:08.841Z,1516687928.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:09.221Z,1516687929.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:09.235Z,1516687929.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:09.610Z,1516687929.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:09.625Z,1516687929.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:10.006Z,1516687930.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:10.025Z,1516687930.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:10.407Z,1516687930.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:10.429Z,1516687930.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:10.818Z,1516687930.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:10.833Z,1516687930.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:11.216Z,1516687931.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:11.243Z,1516687931.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:11.622Z,1516687931.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:11.637Z,1516687931.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:12.025Z,1516687932.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:12.040Z,1516687932.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:15.107Z,1516687935.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:15.121Z,1516687935.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:15.223Z,1516687935.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:15.237Z,1516687935.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:15.580Z,1516687935.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:15.597Z,1516687935.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:15.986Z,1516687935.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:16.000Z,1516687936.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:16.382Z,1516687936.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:16.396Z,1516687936.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:16.772Z,1516687936.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:16.805Z,1516687936.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.178Z,1516687937.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:17.196Z,1516687937.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.574Z,1516687937.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:17.596Z,1516687937.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.972Z,1516687937.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:17.995Z,1516687937.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.995Z,1516687937.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-01-23T06:12:17.995Z,1516687937.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:12:17.997Z,1516687937.997 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.997Z,1516687937.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-01-23T06:12:17.997Z,1516687937.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:12:17.999Z,1516687937.999 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:17.999Z,1516687937.999 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59 2018-01-23T06:12:17.999Z,1516687937.999 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:12:18.023Z,1516687938.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:12:18.023Z,1516687938.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:12:18.023Z,1516687938.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:12:18.383Z,1516687938.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:18.431Z,1516687938.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:12:18.431Z,1516687938.431 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-01-23T06:12:18.432Z,1516687938.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:12:18.432Z,1516687938.432 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-01-23T06:12:18.432Z,1516687938.432 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:12:18.432Z,1516687938.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59 2018-01-23T06:12:18.785Z,1516687938.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:18.809Z,1516687938.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:12:18.809Z,1516687938.809 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:12:18.809Z,1516687938.809 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:12:18.810Z,1516687938.810 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:12:18.810Z,1516687938.810 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:12:18.810Z,1516687938.810 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:12:18.815Z,1516687938.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:12:18.815Z,1516687938.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:12:18.816Z,1516687938.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:12:19.183Z,1516687939.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:19.209Z,1516687939.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:12:19.210Z,1516687939.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:19.567Z,1516687939.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:19.596Z,1516687939.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:12:19.597Z,1516687939.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:19.963Z,1516687939.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:19.994Z,1516687939.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:12:19.995Z,1516687939.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:20.367Z,1516687940.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:20.396Z,1516687940.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:12:20.397Z,1516687940.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:20.766Z,1516687940.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:20.805Z,1516687940.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:12:20.806Z,1516687940.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:21.186Z,1516687941.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:21.212Z,1516687941.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:12:21.213Z,1516687941.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:21.592Z,1516687941.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:21.624Z,1516687941.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:12:21.625Z,1516687941.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:21.993Z,1516687941.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:22.001Z,1516687942.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x10307 got:0x16910 2018-01-23T06:12:22.020Z,1516687942.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:12:22.021Z,1516687942.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:22.370Z,1516687942.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:22.400Z,1516687942.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:12:22.401Z,1516687942.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:22.765Z,1516687942.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:22.774Z,1516687942.774 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T06:12:22.804Z,1516687942.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:12:22.805Z,1516687942.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:23.176Z,1516687943.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:23.211Z,1516687943.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:12:23.212Z,1516687943.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:23.576Z,1516687943.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:23.613Z,1516687943.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:12:23.614Z,1516687943.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:23.981Z,1516687943.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:24.011Z,1516687944.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:12:24.012Z,1516687944.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:24.366Z,1516687944.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:24.408Z,1516687944.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:12:24.409Z,1516687944.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:24.769Z,1516687944.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:24.811Z,1516687944.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:12:24.812Z,1516687944.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:25.198Z,1516687945.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:25.214Z,1516687945.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:12:25.215Z,1516687945.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:25.601Z,1516687945.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:25.615Z,1516687945.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:12:25.616Z,1516687945.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:25.991Z,1516687945.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:26.017Z,1516687946.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:12:26.018Z,1516687946.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:26.370Z,1516687946.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:26.456Z,1516687946.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T06:12:26.457Z,1516687946.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:26.774Z,1516687946.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:26.811Z,1516687946.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:12:26.812Z,1516687946.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:27.180Z,1516687947.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:27.216Z,1516687947.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:12:27.217Z,1516687947.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:27.586Z,1516687947.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:27.615Z,1516687947.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:12:27.616Z,1516687947.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:27.988Z,1516687947.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:28.017Z,1516687948.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:12:28.018Z,1516687948.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:28.366Z,1516687948.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:28.381Z,1516687948.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:12:28.382Z,1516687948.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:28.774Z,1516687948.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:28.790Z,1516687948.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:12:28.792Z,1516687948.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:29.176Z,1516687949.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:29.194Z,1516687949.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:12:29.195Z,1516687949.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:29.576Z,1516687949.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:29.591Z,1516687949.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:12:29.592Z,1516687949.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:29.978Z,1516687949.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:30.006Z,1516687950.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:12:30.011Z,1516687950.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:30.375Z,1516687950.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:30.389Z,1516687950.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:12:30.390Z,1516687950.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:30.768Z,1516687950.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:30.800Z,1516687950.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:12:30.801Z,1516687950.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:31.184Z,1516687951.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:31.198Z,1516687951.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:12:31.200Z,1516687951.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:31.587Z,1516687951.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:31.617Z,1516687951.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:12:31.618Z,1516687951.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:31.983Z,1516687951.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:32.015Z,1516687952.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:12:32.016Z,1516687952.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:32.374Z,1516687952.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:32.403Z,1516687952.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:12:32.404Z,1516687952.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:32.765Z,1516687952.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:32.797Z,1516687952.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:12:32.797Z,1516687952.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:33.184Z,1516687953.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:33.198Z,1516687953.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:12:33.199Z,1516687953.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:33.585Z,1516687953.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:33.617Z,1516687953.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:12:33.618Z,1516687953.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:33.986Z,1516687953.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:34.003Z,1516687954.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:12:34.004Z,1516687954.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:34.363Z,1516687954.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:34.400Z,1516687954.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:12:34.401Z,1516687954.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:34.766Z,1516687954.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:34.796Z,1516687954.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:12:34.797Z,1516687954.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:35.165Z,1516687955.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:35.205Z,1516687955.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:12:35.206Z,1516687955.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:35.584Z,1516687955.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:35.602Z,1516687955.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:12:35.604Z,1516687955.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:35.988Z,1516687955.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:36.016Z,1516687956.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:12:36.017Z,1516687956.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:36.384Z,1516687956.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:36.414Z,1516687956.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:12:36.416Z,1516687956.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:36.773Z,1516687956.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:36.810Z,1516687956.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:12:36.811Z,1516687956.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:37.177Z,1516687957.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:37.210Z,1516687957.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:12:37.211Z,1516687957.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:37.578Z,1516687957.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:37.608Z,1516687957.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:12:37.609Z,1516687957.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:37.966Z,1516687957.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:37.980Z,1516687957.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:12:37.981Z,1516687957.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:38.384Z,1516687958.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:38.412Z,1516687958.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:38.784Z,1516687958.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:38.817Z,1516687958.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:39.180Z,1516687959.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:39.210Z,1516687959.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:39.570Z,1516687959.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:39.585Z,1516687959.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:39.973Z,1516687959.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:39.992Z,1516687959.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:40.368Z,1516687960.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:40.395Z,1516687960.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:40.772Z,1516687960.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:40.791Z,1516687960.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:41.174Z,1516687961.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:41.188Z,1516687961.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:41.581Z,1516687961.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:41.608Z,1516687961.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:41.988Z,1516687961.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:42.005Z,1516687962.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:42.392Z,1516687962.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:42.412Z,1516687962.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:42.777Z,1516687962.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:42.797Z,1516687962.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:43.166Z,1516687963.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:43.201Z,1516687963.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:43.571Z,1516687963.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:43.598Z,1516687963.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:43.964Z,1516687963.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:43.986Z,1516687963.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:44.377Z,1516687964.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:44.409Z,1516687964.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:44.784Z,1516687964.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:44.809Z,1516687964.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:45.177Z,1516687965.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:45.218Z,1516687965.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:45.574Z,1516687965.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:45.607Z,1516687965.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:45.978Z,1516687965.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:46.009Z,1516687966.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:46.365Z,1516687966.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:46.385Z,1516687966.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:46.774Z,1516687966.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:46.789Z,1516687966.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:47.170Z,1516687967.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:47.185Z,1516687967.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:47.584Z,1516687967.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:47.611Z,1516687967.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:47.980Z,1516687967.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:47.994Z,1516687967.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:48.392Z,1516687968.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:48.434Z,1516687968.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:48.771Z,1516687968.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:48.785Z,1516687968.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:49.173Z,1516687969.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:49.187Z,1516687969.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:49.570Z,1516687969.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:49.602Z,1516687969.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:49.970Z,1516687969.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:49.988Z,1516687969.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:50.378Z,1516687970.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:50.393Z,1516687970.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:50.780Z,1516687970.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:50.794Z,1516687970.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:51.178Z,1516687971.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:51.197Z,1516687971.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:51.573Z,1516687971.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:51.593Z,1516687971.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:51.974Z,1516687971.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:51.989Z,1516687971.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:52.373Z,1516687972.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:52.387Z,1516687972.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:52.769Z,1516687972.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:52.791Z,1516687972.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:53.174Z,1516687973.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:53.189Z,1516687973.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:53.583Z,1516687973.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:53.598Z,1516687973.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:53.982Z,1516687973.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:54.001Z,1516687974.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:54.384Z,1516687974.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:54.398Z,1516687974.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:54.768Z,1516687974.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:54.790Z,1516687974.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:55.176Z,1516687975.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:55.191Z,1516687975.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:55.568Z,1516687975.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:55.605Z,1516687975.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:55.965Z,1516687975.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:56.001Z,1516687976.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:56.384Z,1516687976.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:56.398Z,1516687976.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:56.787Z,1516687976.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:56.810Z,1516687976.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:57.184Z,1516687977.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:57.199Z,1516687977.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:57.565Z,1516687977.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:57.597Z,1516687977.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:57.965Z,1516687977.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:58.001Z,1516687978.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:58.373Z,1516687978.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:58.399Z,1516687978.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:58.766Z,1516687978.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:58.793Z,1516687978.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:59.170Z,1516687979.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:59.200Z,1516687979.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:59.580Z,1516687979.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:12:59.606Z,1516687979.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:12:59.980Z,1516687979.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:00.006Z,1516687980.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:00.376Z,1516687980.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:00.407Z,1516687980.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:00.770Z,1516687980.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:00.789Z,1516687980.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:01.170Z,1516687981.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:01.189Z,1516687981.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:01.575Z,1516687981.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:01.589Z,1516687981.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:01.970Z,1516687981.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:01.993Z,1516687981.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:02.377Z,1516687982.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:02.391Z,1516687982.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:02.781Z,1516687982.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:02.795Z,1516687982.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:03.189Z,1516687983.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:03.219Z,1516687983.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:03.572Z,1516687983.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:03.591Z,1516687983.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:03.975Z,1516687983.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:03.989Z,1516687983.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:04.374Z,1516687984.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:04.388Z,1516687984.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:04.770Z,1516687984.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:04.791Z,1516687984.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:05.175Z,1516687985.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:05.189Z,1516687985.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:05.579Z,1516687985.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:05.593Z,1516687985.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:05.980Z,1516687985.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:05.995Z,1516687985.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:06.380Z,1516687986.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:06.400Z,1516687986.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:06.768Z,1516687986.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:06.791Z,1516687986.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:07.168Z,1516687987.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:07.190Z,1516687987.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:07.575Z,1516687987.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:07.592Z,1516687987.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:07.973Z,1516687987.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:07.987Z,1516687987.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:08.378Z,1516687988.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:08.403Z,1516687988.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:08.787Z,1516687988.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:08.805Z,1516687988.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:09.183Z,1516687989.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:09.198Z,1516687989.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:09.568Z,1516687989.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:09.590Z,1516687989.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:09.975Z,1516687989.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:09.997Z,1516687989.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:10.377Z,1516687990.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:10.397Z,1516687990.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:10.772Z,1516687990.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:10.791Z,1516687990.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:10.794Z,1516687990.794 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:13:10.794Z,1516687990.794 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:13:10.794Z,1516687990.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:13:10.795Z,1516687990.795 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:13:11.165Z,1516687991.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:11.200Z,1516687991.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:11.203Z,1516687991.203 [Default:CheckIn:D] Stopped 2018-01-23T06:13:11.203Z,1516687991.203 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:13:11.584Z,1516687991.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:11.598Z,1516687991.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.319059 min 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn:E] Stopped 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn] Stopped 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:13:11.602Z,1516687991.602 [Default:CheckIn](INFO): Running loop #18 2018-01-23T06:13:11.603Z,1516687991.603 [Default:CheckIn] Running Loop=18 2018-01-23T06:13:11.603Z,1516687991.603 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:13:11.603Z,1516687991.603 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:13:11.984Z,1516687991.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:12.011Z,1516687992.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:12.386Z,1516687992.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:12.404Z,1516687992.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:15.462Z,1516687995.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:15.498Z,1516687995.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:15.585Z,1516687995.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:15.616Z,1516687995.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:15.958Z,1516687995.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:15.977Z,1516687995.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:16.364Z,1516687996.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:16.378Z,1516687996.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:16.759Z,1516687996.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:16.773Z,1516687996.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:17.157Z,1516687997.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:17.171Z,1516687997.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:17.551Z,1516687997.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:17.565Z,1516687997.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:17.950Z,1516687997.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:17.964Z,1516687997.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:18.359Z,1516687998.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:18.373Z,1516687998.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:18.760Z,1516687998.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:18.781Z,1516687998.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:19.160Z,1516687999.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:19.174Z,1516687999.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:19.550Z,1516687999.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:19.569Z,1516687999.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:19.951Z,1516687999.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:19.965Z,1516687999.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:20.346Z,1516688000.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:20.365Z,1516688000.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:20.751Z,1516688000.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:20.766Z,1516688000.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:21.146Z,1516688001.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:21.181Z,1516688001.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:21.556Z,1516688001.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:21.588Z,1516688001.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:21.964Z,1516688001.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:13:21.979Z,1516688001.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:22.379Z,1516688002.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:22.770Z,1516688002.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:23.171Z,1516688003.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:23.574Z,1516688003.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:23.972Z,1516688003.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:24.378Z,1516688004.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:24.796Z,1516688004.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:25.187Z,1516688005.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:25.565Z,1516688005.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:25.965Z,1516688005.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:26.365Z,1516688006.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:26.763Z,1516688006.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:27.163Z,1516688007.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:27.567Z,1516688007.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:27.977Z,1516688007.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:28.370Z,1516688008.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:28.764Z,1516688008.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:29.164Z,1516688009.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:29.577Z,1516688009.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:29.969Z,1516688009.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:30.373Z,1516688010.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:30.773Z,1516688010.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:31.173Z,1516688011.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:31.564Z,1516688011.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:31.971Z,1516688011.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:32.365Z,1516688012.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:32.770Z,1516688012.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:33.168Z,1516688013.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:33.573Z,1516688013.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:33.981Z,1516688013.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:34.385Z,1516688014.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:34.765Z,1516688014.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:35.171Z,1516688015.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:35.574Z,1516688015.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:35.973Z,1516688015.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:36.377Z,1516688016.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:36.791Z,1516688016.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:37.177Z,1516688017.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:37.573Z,1516688017.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:37.978Z,1516688017.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:38.364Z,1516688018.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:38.757Z,1516688018.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:39.160Z,1516688019.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:39.585Z,1516688019.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:39.993Z,1516688019.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:40.395Z,1516688020.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:40.765Z,1516688020.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:41.165Z,1516688021.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:41.564Z,1516688021.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:41.973Z,1516688021.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:42.401Z,1516688022.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:42.773Z,1516688022.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:43.173Z,1516688023.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:43.565Z,1516688023.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:43.964Z,1516688023.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:44.369Z,1516688024.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:44.772Z,1516688024.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:45.167Z,1516688025.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:45.585Z,1516688025.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:45.981Z,1516688025.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:46.374Z,1516688026.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:46.767Z,1516688026.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:47.163Z,1516688027.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:47.569Z,1516688027.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:47.973Z,1516688027.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:48.375Z,1516688028.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:48.777Z,1516688028.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:49.174Z,1516688029.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:49.568Z,1516688029.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:49.965Z,1516688029.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:50.377Z,1516688030.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:50.781Z,1516688030.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:51.174Z,1516688031.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:51.568Z,1516688031.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:51.973Z,1516688031.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:52.374Z,1516688032.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:52.781Z,1516688032.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:53.174Z,1516688033.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:53.568Z,1516688033.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:53.965Z,1516688033.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:54.383Z,1516688034.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:54.777Z,1516688034.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:55.174Z,1516688035.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:55.568Z,1516688035.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:55.973Z,1516688035.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:56.377Z,1516688036.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:56.781Z,1516688036.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:57.174Z,1516688037.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:57.566Z,1516688037.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:57.965Z,1516688037.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:58.375Z,1516688038.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:58.778Z,1516688038.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:59.177Z,1516688039.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:59.566Z,1516688039.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:13:59.966Z,1516688039.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:00.384Z,1516688040.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:00.777Z,1516688040.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:01.181Z,1516688041.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:01.569Z,1516688041.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:01.977Z,1516688041.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:02.378Z,1516688042.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:02.777Z,1516688042.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:03.180Z,1516688043.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:03.569Z,1516688043.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:03.965Z,1516688043.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:04.375Z,1516688044.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:04.779Z,1516688044.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:05.174Z,1516688045.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:05.569Z,1516688045.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:05.973Z,1516688045.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:06.375Z,1516688046.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:06.777Z,1516688046.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:07.174Z,1516688047.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:07.566Z,1516688047.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:07.972Z,1516688047.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:08.385Z,1516688048.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:08.781Z,1516688048.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:09.184Z,1516688049.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:09.568Z,1516688049.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:09.965Z,1516688049.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:10.375Z,1516688050.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:10.781Z,1516688050.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:11.174Z,1516688051.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:11.565Z,1516688051.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:11.966Z,1516688051.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:12.377Z,1516688052.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:12.777Z,1516688052.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:15.878Z,1516688055.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:15.908Z,1516688055.908 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:14:16.017Z,1516688056.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:16.368Z,1516688056.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:16.777Z,1516688056.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:17.168Z,1516688057.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:17.574Z,1516688057.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:17.988Z,1516688057.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:18.374Z,1516688058.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:18.773Z,1516688058.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:19.169Z,1516688059.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:19.572Z,1516688059.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:19.977Z,1516688059.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:20.378Z,1516688060.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:20.785Z,1516688060.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:21.193Z,1516688061.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:21.556Z,1516688061.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:21.964Z,1516688061.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:22.393Z,1516688062.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:22.770Z,1516688062.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:23.174Z,1516688063.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:23.565Z,1516688063.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:23.969Z,1516688063.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:24.369Z,1516688064.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:24.773Z,1516688064.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:25.169Z,1516688065.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:25.565Z,1516688065.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:25.961Z,1516688065.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:26.369Z,1516688066.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:26.769Z,1516688066.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:27.173Z,1516688067.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:27.569Z,1516688067.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:27.965Z,1516688067.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:28.369Z,1516688068.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:28.765Z,1516688068.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:29.169Z,1516688069.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:29.573Z,1516688069.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:29.970Z,1516688069.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:30.373Z,1516688070.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:30.769Z,1516688070.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:31.159Z,1516688071.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:31.565Z,1516688071.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:31.961Z,1516688071.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:32.370Z,1516688072.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:32.769Z,1516688072.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:33.173Z,1516688073.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:33.569Z,1516688073.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:33.961Z,1516688073.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:34.362Z,1516688074.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:34.761Z,1516688074.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:35.169Z,1516688075.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:35.569Z,1516688075.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:35.974Z,1516688075.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:36.373Z,1516688076.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:36.762Z,1516688076.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:37.173Z,1516688077.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:37.562Z,1516688077.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:37.971Z,1516688077.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:38.361Z,1516688078.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:38.774Z,1516688078.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:39.173Z,1516688079.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:39.572Z,1516688079.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:39.969Z,1516688079.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:40.369Z,1516688080.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:40.762Z,1516688080.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:41.170Z,1516688081.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:41.581Z,1516688081.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:41.978Z,1516688081.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:42.370Z,1516688082.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:42.769Z,1516688082.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:43.167Z,1516688083.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:43.565Z,1516688083.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:43.968Z,1516688083.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:44.371Z,1516688084.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:44.773Z,1516688084.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:45.186Z,1516688085.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:45.582Z,1516688085.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:45.965Z,1516688085.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:46.367Z,1516688086.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:46.768Z,1516688086.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:47.169Z,1516688087.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:47.572Z,1516688087.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:47.985Z,1516688087.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:48.374Z,1516688088.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:48.767Z,1516688088.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:49.169Z,1516688089.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:49.561Z,1516688089.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:49.967Z,1516688089.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:50.371Z,1516688090.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:50.774Z,1516688090.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:51.177Z,1516688091.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:51.568Z,1516688091.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:51.967Z,1516688091.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:52.369Z,1516688092.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:52.774Z,1516688092.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:53.171Z,1516688093.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:53.577Z,1516688093.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:53.984Z,1516688093.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:54.381Z,1516688094.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:54.772Z,1516688094.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:55.175Z,1516688095.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:55.550Z,1516688095.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:55.953Z,1516688095.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:56.352Z,1516688096.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:56.785Z,1516688096.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:57.184Z,1516688097.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:57.586Z,1516688097.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:57.953Z,1516688097.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:58.357Z,1516688098.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:58.757Z,1516688098.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:59.165Z,1516688099.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:59.564Z,1516688099.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:14:59.992Z,1516688099.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:00.362Z,1516688100.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:00.758Z,1516688100.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:01.158Z,1516688101.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:01.560Z,1516688101.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:01.968Z,1516688101.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:02.363Z,1516688102.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:02.769Z,1516688102.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:03.170Z,1516688103.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:03.573Z,1516688103.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:03.957Z,1516688103.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:04.359Z,1516688104.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:04.761Z,1516688104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:05.158Z,1516688105.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:05.566Z,1516688105.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:05.966Z,1516688105.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:06.373Z,1516688106.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:06.769Z,1516688106.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:07.160Z,1516688107.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:07.558Z,1516688107.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:07.968Z,1516688107.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:08.364Z,1516688108.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:08.773Z,1516688108.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:09.173Z,1516688109.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:09.569Z,1516688109.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:09.969Z,1516688109.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:10.359Z,1516688110.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:10.760Z,1516688110.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:11.158Z,1516688111.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:11.570Z,1516688111.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:11.969Z,1516688111.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:12.369Z,1516688112.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:12.762Z,1516688112.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:13.161Z,1516688113.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:16.266Z,1516688116.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:16.435Z,1516688116.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:16.765Z,1516688116.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:17.172Z,1516688117.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:17.565Z,1516688117.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:17.960Z,1516688117.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:18.365Z,1516688118.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:18.759Z,1516688118.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:19.161Z,1516688119.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:19.162Z,1516688119.162 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-01-23T06:15:19.162Z,1516688119.162 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:15:19.164Z,1516688119.164 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:19.164Z,1516688119.164 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-01-23T06:15:19.164Z,1516688119.164 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:15:19.165Z,1516688119.165 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:19.166Z,1516688119.166 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60 2018-01-23T06:15:19.166Z,1516688119.166 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:15:19.190Z,1516688119.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:15:19.190Z,1516688119.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:15:19.195Z,1516688119.195 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:15:19.586Z,1516688119.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:15:19.586Z,1516688119.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-01-23T06:15:19.587Z,1516688119.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:15:19.587Z,1516688119.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-01-23T06:15:19.587Z,1516688119.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:15:19.587Z,1516688119.587 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60 2018-01-23T06:15:19.972Z,1516688119.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:15:19.972Z,1516688119.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:15:19.973Z,1516688119.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:15:19.973Z,1516688119.973 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:15:19.973Z,1516688119.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:15:19.974Z,1516688119.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:15:19.974Z,1516688119.974 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:15:19.975Z,1516688119.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:15:19.975Z,1516688119.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:15:20.384Z,1516688120.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:15:20.385Z,1516688120.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:20.773Z,1516688120.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:15:20.774Z,1516688120.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:21.169Z,1516688121.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:15:21.169Z,1516688121.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:21.569Z,1516688121.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:15:21.570Z,1516688121.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:21.971Z,1516688121.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:15:21.972Z,1516688121.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:22.369Z,1516688122.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:15:22.369Z,1516688122.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:22.772Z,1516688122.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:15:22.773Z,1516688122.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:23.172Z,1516688123.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:15:23.173Z,1516688123.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:23.572Z,1516688123.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:15:23.573Z,1516688123.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:23.969Z,1516688123.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:15:23.970Z,1516688123.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:24.371Z,1516688124.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:15:24.372Z,1516688124.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:24.768Z,1516688124.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:15:24.769Z,1516688124.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:25.176Z,1516688125.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:15:25.177Z,1516688125.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:25.581Z,1516688125.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:15:25.582Z,1516688125.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:25.974Z,1516688125.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:15:25.975Z,1516688125.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:26.377Z,1516688126.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:15:26.378Z,1516688126.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:26.754Z,1516688126.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:15:26.755Z,1516688126.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:27.156Z,1516688127.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:15:27.157Z,1516688127.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:27.549Z,1516688127.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:15:27.550Z,1516688127.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:27.960Z,1516688127.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:15:27.961Z,1516688127.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:28.351Z,1516688128.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:15:28.352Z,1516688128.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:28.758Z,1516688128.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:15:28.759Z,1516688128.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:29.157Z,1516688129.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:15:29.158Z,1516688129.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:29.586Z,1516688129.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:15:29.590Z,1516688129.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:29.979Z,1516688129.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:15:29.980Z,1516688129.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:30.365Z,1516688130.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:15:30.366Z,1516688130.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:30.804Z,1516688130.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:15:30.805Z,1516688130.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:31.200Z,1516688131.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:15:31.201Z,1516688131.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:31.576Z,1516688131.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:15:31.576Z,1516688131.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:32.007Z,1516688132.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:15:32.008Z,1516688132.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:32.373Z,1516688132.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:15:32.374Z,1516688132.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:32.786Z,1516688132.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:15:32.787Z,1516688132.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:33.158Z,1516688133.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:15:33.159Z,1516688133.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:33.578Z,1516688133.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:15:33.580Z,1516688133.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:33.970Z,1516688133.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:15:33.971Z,1516688133.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:34.342Z,1516688134.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:15:34.343Z,1516688134.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:34.781Z,1516688134.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:15:34.782Z,1516688134.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:35.200Z,1516688135.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:15:35.201Z,1516688135.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:35.591Z,1516688135.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:15:35.592Z,1516688135.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:35.992Z,1516688135.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:15:35.993Z,1516688135.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:36.390Z,1516688136.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:15:36.391Z,1516688136.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:36.767Z,1516688136.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:15:36.768Z,1516688136.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:37.161Z,1516688137.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:15:37.162Z,1516688137.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:37.610Z,1516688137.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:15:37.611Z,1516688137.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:37.989Z,1516688137.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:15:37.990Z,1516688137.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:38.425Z,1516688138.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T06:15:38.426Z,1516688138.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:38.776Z,1516688138.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:15:38.777Z,1516688138.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:39.178Z,1516688139.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:39.588Z,1516688139.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:40.012Z,1516688140.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:40.378Z,1516688140.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:40.800Z,1516688140.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:41.204Z,1516688141.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:41.594Z,1516688141.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:41.965Z,1516688141.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:42.407Z,1516688142.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:42.770Z,1516688142.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:43.186Z,1516688143.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:43.585Z,1516688143.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:43.993Z,1516688143.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:44.401Z,1516688144.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:44.808Z,1516688144.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:45.194Z,1516688145.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:45.562Z,1516688145.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:45.968Z,1516688145.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:46.341Z,1516688146.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:46.771Z,1516688146.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:47.181Z,1516688147.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:47.568Z,1516688147.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:47.949Z,1516688147.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:48.353Z,1516688148.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:48.751Z,1516688148.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:49.177Z,1516688149.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:49.561Z,1516688149.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:49.959Z,1516688149.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:50.358Z,1516688150.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:50.756Z,1516688150.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:51.150Z,1516688151.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:51.559Z,1516688151.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:51.955Z,1516688151.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:52.354Z,1516688152.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:52.762Z,1516688152.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:53.165Z,1516688153.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:53.563Z,1516688153.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:53.962Z,1516688153.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:54.360Z,1516688154.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:54.758Z,1516688154.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:55.154Z,1516688155.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:55.568Z,1516688155.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:55.963Z,1516688155.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:56.369Z,1516688156.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:56.759Z,1516688156.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:57.153Z,1516688157.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:57.595Z,1516688157.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:57.973Z,1516688157.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:58.373Z,1516688158.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:58.756Z,1516688158.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:59.155Z,1516688159.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:59.569Z,1516688159.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:15:59.967Z,1516688159.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:00.363Z,1516688160.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:00.760Z,1516688160.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:01.169Z,1516688161.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:01.559Z,1516688161.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x32518 got:0x42497 2018-01-23T06:16:01.577Z,1516688161.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:01.969Z,1516688161.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:02.433Z,1516688162.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:02.762Z,1516688162.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:03.161Z,1516688163.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:03.567Z,1516688163.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:03.958Z,1516688163.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:04.373Z,1516688164.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:04.762Z,1516688164.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x62604 got:0x11803 2018-01-23T06:16:04.797Z,1516688164.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:05.201Z,1516688165.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:05.562Z,1516688165.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:05.973Z,1516688165.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:06.360Z,1516688166.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:06.760Z,1516688166.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:07.162Z,1516688167.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:07.577Z,1516688167.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:08.011Z,1516688168.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:08.369Z,1516688168.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:08.759Z,1516688168.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:09.156Z,1516688169.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:09.567Z,1516688169.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:09.970Z,1516688169.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:10.366Z,1516688170.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:10.763Z,1516688170.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:11.168Z,1516688171.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:11.570Z,1516688171.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:11.981Z,1516688171.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:12.378Z,1516688172.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:12.773Z,1516688172.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:13.146Z,1516688173.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T06:16:13.177Z,1516688173.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:13.564Z,1516688173.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:16.669Z,1516688176.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:16.790Z,1516688176.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:17.153Z,1516688177.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:17.542Z,1516688177.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:17.940Z,1516688177.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:18.344Z,1516688178.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:18.745Z,1516688178.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:19.149Z,1516688179.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:19.552Z,1516688179.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:19.936Z,1516688179.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:20.337Z,1516688180.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:20.743Z,1516688180.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:21.139Z,1516688181.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:21.547Z,1516688181.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:21.949Z,1516688181.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:22.349Z,1516688182.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:22.746Z,1516688182.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:23.145Z,1516688183.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:23.538Z,1516688183.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:23.943Z,1516688183.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:24.336Z,1516688184.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:24.749Z,1516688184.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:25.147Z,1516688185.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:25.546Z,1516688185.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:25.938Z,1516688185.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:26.343Z,1516688186.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:26.745Z,1516688186.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:27.147Z,1516688187.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:27.544Z,1516688187.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:27.951Z,1516688187.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:28.350Z,1516688188.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:28.746Z,1516688188.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:29.144Z,1516688189.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:29.548Z,1516688189.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:29.944Z,1516688189.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:30.344Z,1516688190.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:30.752Z,1516688190.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:31.155Z,1516688191.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:31.551Z,1516688191.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:31.944Z,1516688191.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:32.338Z,1516688192.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:32.744Z,1516688192.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:33.149Z,1516688193.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:33.525Z,1516688193.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:33.949Z,1516688193.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:34.363Z,1516688194.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:34.749Z,1516688194.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:35.127Z,1516688195.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:35.527Z,1516688195.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:35.932Z,1516688195.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:36.361Z,1516688196.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:36.741Z,1516688196.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:37.142Z,1516688197.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:37.538Z,1516688197.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:37.940Z,1516688197.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:38.332Z,1516688198.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:38.737Z,1516688198.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:39.123Z,1516688199.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:39.137Z,1516688199.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:39.516Z,1516688199.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:39.539Z,1516688199.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:39.931Z,1516688199.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:39.946Z,1516688199.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:40.335Z,1516688200.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:40.356Z,1516688200.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:40.732Z,1516688200.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:40.747Z,1516688200.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:41.113Z,1516688201.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:41.147Z,1516688201.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:41.513Z,1516688201.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:41.548Z,1516688201.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:41.914Z,1516688201.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:41.948Z,1516688201.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:42.314Z,1516688202.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:42.345Z,1516688202.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:42.733Z,1516688202.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:42.747Z,1516688202.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:43.136Z,1516688203.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:43.150Z,1516688203.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:43.528Z,1516688203.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:43.552Z,1516688203.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:43.913Z,1516688203.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:43.940Z,1516688203.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:44.311Z,1516688204.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:44.338Z,1516688204.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:44.713Z,1516688204.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:44.744Z,1516688204.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:45.114Z,1516688205.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:45.152Z,1516688205.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:45.513Z,1516688205.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:45.549Z,1516688205.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:45.924Z,1516688205.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:45.954Z,1516688205.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:46.332Z,1516688206.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:46.359Z,1516688206.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:46.728Z,1516688206.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:46.758Z,1516688206.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:47.125Z,1516688207.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:47.161Z,1516688207.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:47.522Z,1516688207.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:47.536Z,1516688207.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:47.925Z,1516688207.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:47.939Z,1516688207.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:48.318Z,1516688208.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:48.336Z,1516688208.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:48.724Z,1516688208.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:48.739Z,1516688208.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:49.128Z,1516688209.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:49.143Z,1516688209.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:49.524Z,1516688209.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:49.538Z,1516688209.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:49.923Z,1516688209.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:49.944Z,1516688209.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:50.318Z,1516688210.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:50.338Z,1516688210.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:50.723Z,1516688210.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:50.737Z,1516688210.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:51.123Z,1516688211.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:51.137Z,1516688211.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:51.517Z,1516688211.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:51.540Z,1516688211.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:51.928Z,1516688211.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:51.943Z,1516688211.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:52.329Z,1516688212.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:52.348Z,1516688212.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:52.730Z,1516688212.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:52.744Z,1516688212.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:53.117Z,1516688213.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:53.152Z,1516688213.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:53.527Z,1516688213.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:53.541Z,1516688213.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:53.920Z,1516688213.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:53.941Z,1516688213.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:54.327Z,1516688214.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:54.353Z,1516688214.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:54.737Z,1516688214.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:54.751Z,1516688214.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:55.128Z,1516688215.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:55.159Z,1516688215.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:55.532Z,1516688215.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:55.547Z,1516688215.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:55.913Z,1516688215.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:55.941Z,1516688215.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:56.311Z,1516688216.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:56.338Z,1516688216.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:56.713Z,1516688216.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:56.748Z,1516688216.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:57.118Z,1516688217.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:57.150Z,1516688217.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:57.511Z,1516688217.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:57.525Z,1516688217.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:57.924Z,1516688217.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:57.946Z,1516688217.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:58.328Z,1516688218.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:58.362Z,1516688218.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:58.724Z,1516688218.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:58.755Z,1516688218.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:59.121Z,1516688219.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:59.157Z,1516688219.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:59.521Z,1516688219.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:59.535Z,1516688219.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:16:59.919Z,1516688219.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:16:59.934Z,1516688219.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:00.318Z,1516688220.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:00.340Z,1516688220.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:00.728Z,1516688220.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:00.742Z,1516688220.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:01.126Z,1516688221.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:01.145Z,1516688221.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:01.526Z,1516688221.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:01.545Z,1516688221.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:01.926Z,1516688221.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:01.940Z,1516688221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:02.316Z,1516688222.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:02.337Z,1516688222.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:02.721Z,1516688222.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:02.741Z,1516688222.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:03.123Z,1516688223.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:03.137Z,1516688223.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:03.516Z,1516688223.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:03.536Z,1516688223.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:03.924Z,1516688223.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:03.950Z,1516688223.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:04.332Z,1516688224.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:04.346Z,1516688224.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:04.726Z,1516688224.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:04.741Z,1516688224.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:05.121Z,1516688225.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:05.141Z,1516688225.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:05.522Z,1516688225.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:05.536Z,1516688225.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:05.922Z,1516688225.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:05.936Z,1516688225.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:06.320Z,1516688226.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:06.341Z,1516688226.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:06.728Z,1516688226.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:06.742Z,1516688226.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:07.127Z,1516688227.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:07.149Z,1516688227.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:07.527Z,1516688227.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:07.541Z,1516688227.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:07.923Z,1516688227.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:07.936Z,1516688227.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:08.318Z,1516688228.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:08.344Z,1516688228.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:08.716Z,1516688228.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:08.739Z,1516688228.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:09.123Z,1516688229.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:09.137Z,1516688229.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:09.515Z,1516688229.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:09.541Z,1516688229.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:09.936Z,1516688229.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:09.950Z,1516688229.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:10.337Z,1516688230.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:10.351Z,1516688230.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:10.733Z,1516688230.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:10.753Z,1516688230.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:11.113Z,1516688231.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:11.145Z,1516688231.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:11.513Z,1516688231.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:11.549Z,1516688231.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:11.914Z,1516688231.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:11.941Z,1516688231.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:12.314Z,1516688232.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:12.350Z,1516688232.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:12.732Z,1516688232.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:12.752Z,1516688232.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:13.128Z,1516688233.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:13.156Z,1516688233.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:13.536Z,1516688233.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:13.551Z,1516688233.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:13.914Z,1516688233.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:13.950Z,1516688233.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:17.026Z,1516688237.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:17.049Z,1516688237.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:17.151Z,1516688237.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:17.195Z,1516688237.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:17.504Z,1516688237.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:17.519Z,1516688237.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:17.920Z,1516688237.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:17.943Z,1516688237.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:18.304Z,1516688238.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:18.319Z,1516688238.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:18.700Z,1516688238.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:18.715Z,1516688238.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:19.102Z,1516688239.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:19.116Z,1516688239.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:19.498Z,1516688239.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:19.512Z,1516688239.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:19.904Z,1516688239.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:19.919Z,1516688239.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:20.308Z,1516688240.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:20.322Z,1516688240.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:20.716Z,1516688240.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:20.746Z,1516688240.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:21.100Z,1516688241.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:21.115Z,1516688241.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:21.500Z,1516688241.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:21.515Z,1516688241.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:21.898Z,1516688241.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:21.917Z,1516688241.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:22.301Z,1516688242.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:22.321Z,1516688242.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:22.711Z,1516688242.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:22.732Z,1516688242.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:23.109Z,1516688243.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:23.128Z,1516688243.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:23.509Z,1516688243.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:23.531Z,1516688243.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:23.903Z,1516688243.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:23.917Z,1516688243.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:24.295Z,1516688244.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:24.325Z,1516688244.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:24.704Z,1516688244.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:24.729Z,1516688244.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:25.094Z,1516688245.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:25.121Z,1516688245.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:25.491Z,1516688245.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:25.522Z,1516688245.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:25.916Z,1516688245.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:25.930Z,1516688245.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:26.317Z,1516688246.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:26.331Z,1516688246.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:26.704Z,1516688246.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:26.742Z,1516688246.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:27.097Z,1516688247.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:27.129Z,1516688247.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:27.494Z,1516688247.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:27.530Z,1516688247.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:27.895Z,1516688247.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:27.925Z,1516688247.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:28.298Z,1516688248.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:28.328Z,1516688248.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:28.708Z,1516688248.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:28.736Z,1516688248.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:29.105Z,1516688249.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:29.136Z,1516688249.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:29.516Z,1516688249.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:29.542Z,1516688249.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:29.898Z,1516688249.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:29.917Z,1516688249.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:30.292Z,1516688250.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:30.307Z,1516688250.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:30.706Z,1516688250.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:30.740Z,1516688250.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:31.106Z,1516688251.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:31.144Z,1516688251.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:31.493Z,1516688251.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:31.509Z,1516688251.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:31.917Z,1516688251.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:31.942Z,1516688251.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:32.328Z,1516688252.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:32.343Z,1516688252.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:32.712Z,1516688252.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:32.741Z,1516688252.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:33.105Z,1516688253.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:33.140Z,1516688253.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:33.505Z,1516688253.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:33.544Z,1516688253.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:33.893Z,1516688253.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:33.913Z,1516688253.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:34.305Z,1516688254.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:34.341Z,1516688254.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:34.716Z,1516688254.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:34.748Z,1516688254.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:35.104Z,1516688255.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:35.118Z,1516688255.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:35.512Z,1516688255.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:35.526Z,1516688255.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:35.902Z,1516688255.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:35.916Z,1516688255.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:36.296Z,1516688256.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:36.323Z,1516688256.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:36.705Z,1516688256.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:36.720Z,1516688256.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:37.102Z,1516688257.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:37.117Z,1516688257.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:37.501Z,1516688257.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:37.515Z,1516688257.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:37.906Z,1516688257.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:37.925Z,1516688257.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:38.307Z,1516688258.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:38.321Z,1516688258.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:38.708Z,1516688258.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:38.723Z,1516688258.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:39.101Z,1516688259.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:39.116Z,1516688259.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:39.502Z,1516688259.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:39.516Z,1516688259.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:39.900Z,1516688259.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:39.919Z,1516688259.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:40.301Z,1516688260.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:40.315Z,1516688260.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:40.707Z,1516688260.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:40.728Z,1516688260.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:41.106Z,1516688261.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:41.125Z,1516688261.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:41.505Z,1516688261.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:41.525Z,1516688261.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:41.903Z,1516688261.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:41.917Z,1516688261.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:42.296Z,1516688262.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:42.320Z,1516688262.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:42.710Z,1516688262.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:42.725Z,1516688262.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:43.114Z,1516688263.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:43.151Z,1516688263.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:43.504Z,1516688263.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:43.529Z,1516688263.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:43.894Z,1516688263.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:43.929Z,1516688263.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:44.297Z,1516688264.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:44.311Z,1516688264.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:44.708Z,1516688264.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:44.734Z,1516688264.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:45.108Z,1516688265.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:45.133Z,1516688265.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:45.511Z,1516688265.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:45.538Z,1516688265.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:45.898Z,1516688265.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:45.913Z,1516688265.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:46.301Z,1516688266.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:46.316Z,1516688266.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:46.716Z,1516688266.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:46.741Z,1516688266.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:47.108Z,1516688267.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:47.122Z,1516688267.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:47.512Z,1516688267.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:47.543Z,1516688267.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:47.899Z,1516688267.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:47.919Z,1516688267.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:48.291Z,1516688268.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:48.306Z,1516688268.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:48.708Z,1516688268.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:48.733Z,1516688268.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:49.109Z,1516688269.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:49.137Z,1516688269.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:49.505Z,1516688269.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:49.537Z,1516688269.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:49.894Z,1516688269.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:49.909Z,1516688269.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:50.293Z,1516688270.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:50.313Z,1516688270.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:50.713Z,1516688270.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:50.739Z,1516688270.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:51.129Z,1516688271.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:51.149Z,1516688271.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:51.516Z,1516688271.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:51.548Z,1516688271.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:51.902Z,1516688271.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:51.916Z,1516688271.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:52.302Z,1516688272.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:52.321Z,1516688272.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:52.716Z,1516688272.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:52.749Z,1516688272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:53.104Z,1516688273.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:53.118Z,1516688273.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:53.508Z,1516688273.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:53.522Z,1516688273.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:53.902Z,1516688273.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:53.917Z,1516688273.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:54.301Z,1516688274.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:54.315Z,1516688274.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:54.704Z,1516688274.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:54.718Z,1516688274.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:55.108Z,1516688275.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:55.122Z,1516688275.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:55.504Z,1516688275.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:55.518Z,1516688275.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:55.898Z,1516688275.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:55.925Z,1516688275.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:56.306Z,1516688276.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:56.320Z,1516688276.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:56.706Z,1516688276.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:56.721Z,1516688276.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:57.108Z,1516688277.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:57.122Z,1516688277.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:57.507Z,1516688277.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:57.522Z,1516688277.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:57.900Z,1516688277.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:57.919Z,1516688277.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:58.300Z,1516688278.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:58.315Z,1516688278.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:58.707Z,1516688278.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:58.722Z,1516688278.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:59.108Z,1516688279.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:59.122Z,1516688279.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:59.506Z,1516688279.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:59.525Z,1516688279.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:17:59.896Z,1516688279.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:17:59.929Z,1516688279.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:00.305Z,1516688280.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:00.325Z,1516688280.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:00.710Z,1516688280.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:00.729Z,1516688280.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:01.112Z,1516688281.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:01.126Z,1516688281.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:01.510Z,1516688281.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:01.529Z,1516688281.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:01.906Z,1516688281.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:01.920Z,1516688281.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:02.298Z,1516688282.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:02.325Z,1516688282.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:02.715Z,1516688282.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:02.729Z,1516688282.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:03.116Z,1516688283.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:03.130Z,1516688283.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:03.513Z,1516688283.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:03.527Z,1516688283.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:03.898Z,1516688283.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:03.920Z,1516688283.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:04.296Z,1516688284.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:04.319Z,1516688284.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:04.716Z,1516688284.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:04.731Z,1516688284.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:05.115Z,1516688285.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:05.129Z,1516688285.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:05.512Z,1516688285.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:05.527Z,1516688285.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:05.916Z,1516688285.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:05.930Z,1516688285.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:06.310Z,1516688286.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:06.329Z,1516688286.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:06.717Z,1516688286.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:06.731Z,1516688286.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:07.117Z,1516688287.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:07.131Z,1516688287.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:07.512Z,1516688287.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:07.526Z,1516688287.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:07.899Z,1516688287.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:07.922Z,1516688287.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:08.302Z,1516688288.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:08.322Z,1516688288.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:08.713Z,1516688288.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:08.727Z,1516688288.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:09.118Z,1516688289.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:09.132Z,1516688289.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:09.514Z,1516688289.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:09.528Z,1516688289.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:09.898Z,1516688289.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:09.922Z,1516688289.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:10.297Z,1516688290.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:10.321Z,1516688290.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:10.713Z,1516688290.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:10.728Z,1516688290.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:11.113Z,1516688291.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:11.141Z,1516688291.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:11.516Z,1516688291.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:11.531Z,1516688291.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:11.893Z,1516688291.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:11.929Z,1516688291.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:11.933Z,1516688291.933 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:13:11.6Z 2018-01-23T06:18:11.933Z,1516688291.933 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:18:11.933Z,1516688291.933 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:18:12.294Z,1516688292.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:12.321Z,1516688292.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:12.823Z,1516688292.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:12.837Z,1516688292.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:13.108Z,1516688293.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:13.130Z,1516688293.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:16.217Z,1516688296.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:16.231Z,1516688296.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:16.319Z,1516688296.319 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0072.lzma 2018-01-23T06:18:16.364Z,1516688296.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:16.389Z,1516688296.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:16.678Z,1516688296.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:16.697Z,1516688296.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:17.053Z,1516688297.053 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0072.lzma.bak 2018-01-23T06:18:17.053Z,1516688297.053 [DataOverHttps](INFO): SBD MOMSN=7755123 2018-01-23T06:18:17.092Z,1516688297.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:17.122Z,1516688297.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:17.705Z,1516688297.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:17.734Z,1516688297.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:17.887Z,1516688297.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:17.901Z,1516688297.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:20.988Z,1516688300.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:21.002Z,1516688301.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:21.002Z,1516688301.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-01-23T06:18:21.002Z,1516688301.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:18:21.004Z,1516688301.004 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:21.004Z,1516688301.004 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-01-23T06:18:21.004Z,1516688301.004 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:18:21.006Z,1516688301.006 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:21.006Z,1516688301.006 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61 2018-01-23T06:18:21.006Z,1516688301.006 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:18:21.043Z,1516688301.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:18:21.043Z,1516688301.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:18:21.044Z,1516688301.044 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:18:21.148Z,1516688301.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:21.197Z,1516688301.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:18:21.197Z,1516688301.197 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-01-23T06:18:21.198Z,1516688301.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:18:21.198Z,1516688301.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-01-23T06:18:21.198Z,1516688301.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:18:21.198Z,1516688301.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61 2018-01-23T06:18:21.480Z,1516688301.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:21.510Z,1516688301.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:18:21.511Z,1516688301.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:18:21.511Z,1516688301.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:18:21.512Z,1516688301.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:18:21.512Z,1516688301.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:18:21.512Z,1516688301.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:18:21.513Z,1516688301.513 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:18:21.513Z,1516688301.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:18:21.513Z,1516688301.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:18:21.899Z,1516688301.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:21.913Z,1516688301.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T06:18:21.914Z,1516688301.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:22.284Z,1516688302.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:22.299Z,1516688302.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T06:18:22.300Z,1516688302.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:22.680Z,1516688302.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:22.712Z,1516688302.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T06:18:22.713Z,1516688302.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:25.820Z,1516688305.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:25.844Z,1516688305.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:18:25.845Z,1516688305.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:25.930Z,1516688305.930 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0073.lzma 2018-01-23T06:18:25.964Z,1516688305.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:25.997Z,1516688305.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s. 2018-01-23T06:18:25.998Z,1516688305.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:26.316Z,1516688306.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:26.346Z,1516688306.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T06:18:26.347Z,1516688306.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:27.176Z,1516688307.176 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0073.lzma.bak 2018-01-23T06:18:27.177Z,1516688307.177 [DataOverHttps](INFO): SBD MOMSN=7755125 2018-01-23T06:18:27.203Z,1516688307.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:27.254Z,1516688307.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T06:18:27.255Z,1516688307.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:27.588Z,1516688307.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:27.608Z,1516688307.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s. 2018-01-23T06:18:27.609Z,1516688307.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:27.612Z,1516688307.612 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:18:27.612Z,1516688307.612 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:18:27.613Z,1516688307.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:18:27.735Z,1516688307.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:27.768Z,1516688307.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:18:27.769Z,1516688307.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:30.816Z,1516688310.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:30.848Z,1516688310.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T06:18:30.849Z,1516688310.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:30.954Z,1516688310.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:30.970Z,1516688310.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:18:30.971Z,1516688310.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:31.300Z,1516688311.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:31.340Z,1516688311.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T06:18:31.342Z,1516688311.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:31.705Z,1516688311.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:31.718Z,1516688311.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T06:18:31.719Z,1516688311.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:32.106Z,1516688312.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:32.120Z,1516688312.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T06:18:32.121Z,1516688312.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:32.500Z,1516688312.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:32.515Z,1516688312.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T06:18:32.516Z,1516688312.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:32.911Z,1516688312.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:32.925Z,1516688312.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T06:18:32.926Z,1516688312.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:33.310Z,1516688313.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:33.328Z,1516688313.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T06:18:33.329Z,1516688313.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:33.711Z,1516688313.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:33.725Z,1516688313.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T06:18:33.726Z,1516688313.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:34.103Z,1516688314.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:34.124Z,1516688314.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T06:18:34.125Z,1516688314.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:34.495Z,1516688314.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:34.525Z,1516688314.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T06:18:34.526Z,1516688314.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:34.904Z,1516688314.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:34.922Z,1516688314.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T06:18:34.923Z,1516688314.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:35.294Z,1516688315.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:35.328Z,1516688315.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T06:18:35.329Z,1516688315.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:35.693Z,1516688315.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:35.724Z,1516688315.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T06:18:35.725Z,1516688315.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:36.112Z,1516688316.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:36.126Z,1516688316.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T06:18:36.127Z,1516688316.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:36.516Z,1516688316.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:36.530Z,1516688316.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T06:18:36.531Z,1516688316.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:36.908Z,1516688316.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:36.928Z,1516688316.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T06:18:36.929Z,1516688316.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:37.293Z,1516688317.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:37.318Z,1516688317.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T06:18:37.319Z,1516688317.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:37.694Z,1516688317.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:37.721Z,1516688317.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T06:18:37.722Z,1516688317.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:38.094Z,1516688318.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:38.108Z,1516688318.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T06:18:38.109Z,1516688318.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:38.493Z,1516688318.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:38.512Z,1516688318.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T06:18:38.513Z,1516688318.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:38.907Z,1516688318.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:38.944Z,1516688318.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T06:18:38.945Z,1516688318.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:39.308Z,1516688319.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:39.338Z,1516688319.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T06:18:39.339Z,1516688319.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:39.712Z,1516688319.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:39.742Z,1516688319.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T06:18:39.748Z,1516688319.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:40.101Z,1516688320.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:40.114Z,1516688320.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T06:18:40.115Z,1516688320.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:40.496Z,1516688320.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:40.518Z,1516688320.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T06:18:40.523Z,1516688320.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:40.901Z,1516688320.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:40.915Z,1516688320.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T06:18:40.916Z,1516688320.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:41.303Z,1516688321.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:41.324Z,1516688321.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:41.704Z,1516688321.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:41.718Z,1516688321.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:42.120Z,1516688322.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:42.151Z,1516688322.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:42.507Z,1516688322.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:42.528Z,1516688322.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:42.908Z,1516688322.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:42.923Z,1516688322.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:43.301Z,1516688323.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:43.321Z,1516688323.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:43.706Z,1516688323.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:43.720Z,1516688323.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:44.098Z,1516688324.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:44.124Z,1516688324.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:44.501Z,1516688324.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:44.515Z,1516688324.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:44.912Z,1516688324.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:44.926Z,1516688324.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:45.311Z,1516688325.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:45.333Z,1516688325.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:45.711Z,1516688325.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:45.725Z,1516688325.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:46.104Z,1516688326.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:46.117Z,1516688326.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:46.494Z,1516688326.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:46.529Z,1516688326.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:46.906Z,1516688326.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:46.921Z,1516688326.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:47.302Z,1516688327.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:47.331Z,1516688327.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:47.696Z,1516688327.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:47.727Z,1516688327.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:48.113Z,1516688328.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:48.133Z,1516688328.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:48.518Z,1516688328.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:48.536Z,1516688328.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:48.912Z,1516688328.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:48.930Z,1516688328.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:49.293Z,1516688329.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:49.325Z,1516688329.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:49.693Z,1516688329.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:49.728Z,1516688329.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:50.106Z,1516688330.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:50.121Z,1516688330.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:50.493Z,1516688330.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:50.525Z,1516688330.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:50.913Z,1516688330.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:50.929Z,1516688330.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:51.308Z,1516688331.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:51.336Z,1516688331.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:51.712Z,1516688331.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:51.726Z,1516688331.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:52.093Z,1516688332.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:52.133Z,1516688332.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:52.491Z,1516688332.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:52.518Z,1516688332.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:52.892Z,1516688332.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:52.925Z,1516688332.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:53.294Z,1516688333.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:53.325Z,1516688333.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:53.693Z,1516688333.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:53.729Z,1516688333.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:54.104Z,1516688334.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:54.139Z,1516688334.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:54.518Z,1516688334.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:54.532Z,1516688334.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:54.916Z,1516688334.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:54.930Z,1516688334.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:55.293Z,1516688335.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:55.329Z,1516688335.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:55.693Z,1516688335.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:55.720Z,1516688335.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:56.094Z,1516688336.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:56.108Z,1516688336.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:56.493Z,1516688336.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:56.513Z,1516688336.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:56.912Z,1516688336.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:56.939Z,1516688336.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:57.313Z,1516688337.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:57.338Z,1516688337.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:57.716Z,1516688337.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:57.741Z,1516688337.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:58.105Z,1516688338.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:58.142Z,1516688338.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:58.497Z,1516688338.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:58.517Z,1516688338.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:58.901Z,1516688338.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:58.921Z,1516688338.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:59.302Z,1516688339.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:59.316Z,1516688339.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:18:59.698Z,1516688339.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:18:59.720Z,1516688339.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:00.106Z,1516688340.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:00.125Z,1516688340.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:00.508Z,1516688340.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:00.522Z,1516688340.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:00.906Z,1516688340.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:00.925Z,1516688340.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:01.306Z,1516688341.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:01.320Z,1516688341.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:01.703Z,1516688341.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:01.722Z,1516688341.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:02.098Z,1516688342.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:02.120Z,1516688342.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:02.503Z,1516688342.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:02.517Z,1516688342.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:02.908Z,1516688342.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:02.923Z,1516688342.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:03.308Z,1516688343.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:03.322Z,1516688343.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:03.708Z,1516688343.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:03.722Z,1516688343.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:04.103Z,1516688344.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:04.118Z,1516688344.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:04.503Z,1516688344.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:04.517Z,1516688344.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:04.907Z,1516688344.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:04.921Z,1516688344.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:05.302Z,1516688345.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:05.323Z,1516688345.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:05.698Z,1516688345.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:05.720Z,1516688345.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:06.106Z,1516688346.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:06.125Z,1516688346.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:06.514Z,1516688346.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:06.533Z,1516688346.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:06.917Z,1516688346.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:06.937Z,1516688346.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:07.302Z,1516688347.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:07.387Z,1516688347.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:07.706Z,1516688347.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:07.721Z,1516688347.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:08.096Z,1516688348.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:08.152Z,1516688348.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:08.505Z,1516688348.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:08.521Z,1516688348.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:08.912Z,1516688348.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:08.928Z,1516688348.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:09.315Z,1516688349.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:09.331Z,1516688349.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:09.711Z,1516688349.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:09.726Z,1516688349.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:10.103Z,1516688350.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:10.124Z,1516688350.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:10.496Z,1516688350.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:10.518Z,1516688350.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:10.900Z,1516688350.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:10.918Z,1516688350.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:11.311Z,1516688351.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:11.325Z,1516688351.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:11.696Z,1516688351.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:11.730Z,1516688351.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:12.108Z,1516688352.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:12.122Z,1516688352.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:12.507Z,1516688352.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:12.521Z,1516688352.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:12.904Z,1516688352.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:12.919Z,1516688352.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:13.315Z,1516688353.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:13.329Z,1516688353.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:13.706Z,1516688353.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:13.719Z,1516688353.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:14.100Z,1516688354.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:14.149Z,1516688354.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:14.497Z,1516688354.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:14.529Z,1516688354.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:14.904Z,1516688354.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:14.938Z,1516688354.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:15.316Z,1516688355.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:15.331Z,1516688355.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:15.704Z,1516688355.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:15.737Z,1516688355.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:16.094Z,1516688356.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:16.199Z,1516688356.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:16.497Z,1516688356.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:16.528Z,1516688356.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:16.893Z,1516688356.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:16.929Z,1516688356.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:17.294Z,1516688357.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:17.330Z,1516688357.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:17.697Z,1516688357.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:17.728Z,1516688357.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:18.104Z,1516688358.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:18.138Z,1516688358.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:18.517Z,1516688358.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:18.531Z,1516688358.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:18.904Z,1516688358.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:18.941Z,1516688358.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:19.301Z,1516688359.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:19.335Z,1516688359.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:19.698Z,1516688359.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:19.737Z,1516688359.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:20.102Z,1516688360.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:20.136Z,1516688360.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:20.498Z,1516688360.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:20.512Z,1516688360.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:20.916Z,1516688360.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:20.941Z,1516688360.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:21.316Z,1516688361.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:21.339Z,1516688361.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:21.716Z,1516688361.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:21.739Z,1516688361.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:22.105Z,1516688362.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:22.119Z,1516688362.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:22.501Z,1516688362.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:22.521Z,1516688362.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:22.899Z,1516688362.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:22.913Z,1516688362.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:23.298Z,1516688363.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:23.324Z,1516688363.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:23.698Z,1516688363.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:23.717Z,1516688363.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:24.108Z,1516688364.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:24.122Z,1516688364.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:24.516Z,1516688364.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:24.530Z,1516688364.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:24.916Z,1516688364.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:24.930Z,1516688364.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:25.302Z,1516688365.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:25.317Z,1516688365.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:25.703Z,1516688365.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:25.717Z,1516688365.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:26.100Z,1516688366.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:26.127Z,1516688366.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:26.494Z,1516688366.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:26.529Z,1516688366.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:26.918Z,1516688366.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:26.932Z,1516688366.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:27.321Z,1516688367.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:27.335Z,1516688367.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:27.708Z,1516688367.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:27.730Z,1516688367.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:28.094Z,1516688368.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:28.123Z,1516688368.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:31.190Z,1516688371.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:31.218Z,1516688371.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:31.323Z,1516688371.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:31.367Z,1516688371.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:31.684Z,1516688371.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:31.715Z,1516688371.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:32.080Z,1516688372.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:32.094Z,1516688372.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:32.474Z,1516688372.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:32.493Z,1516688372.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:32.873Z,1516688372.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:32.887Z,1516688372.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:33.270Z,1516688373.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:33.289Z,1516688373.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:33.668Z,1516688373.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:33.683Z,1516688373.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:34.072Z,1516688374.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:34.102Z,1516688374.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:34.476Z,1516688374.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:34.491Z,1516688374.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:34.875Z,1516688374.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:34.889Z,1516688374.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:35.268Z,1516688375.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:35.283Z,1516688375.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:35.664Z,1516688375.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:35.697Z,1516688375.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:36.075Z,1516688376.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:36.097Z,1516688376.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:36.468Z,1516688376.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:36.487Z,1516688376.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:36.881Z,1516688376.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:36.895Z,1516688376.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:37.279Z,1516688377.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:37.293Z,1516688377.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:37.679Z,1516688377.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:37.693Z,1516688377.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:38.071Z,1516688378.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:38.085Z,1516688378.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:38.466Z,1516688378.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:38.492Z,1516688378.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:38.884Z,1516688378.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:38.905Z,1516688378.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:39.284Z,1516688379.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:39.305Z,1516688379.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:39.684Z,1516688379.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:39.698Z,1516688379.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:40.071Z,1516688380.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:40.102Z,1516688380.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:40.462Z,1516688380.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:40.497Z,1516688380.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:40.885Z,1516688380.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:40.900Z,1516688380.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:41.294Z,1516688381.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:41.308Z,1516688381.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:41.673Z,1516688381.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:41.709Z,1516688381.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:42.067Z,1516688382.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:42.098Z,1516688382.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:42.466Z,1516688382.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:42.481Z,1516688382.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:42.881Z,1516688382.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:42.909Z,1516688382.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:43.281Z,1516688383.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:43.307Z,1516688383.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:43.716Z,1516688383.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:43.730Z,1516688383.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:44.069Z,1516688384.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:44.084Z,1516688384.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:44.469Z,1516688384.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:44.489Z,1516688384.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:44.869Z,1516688384.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:44.885Z,1516688384.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:45.271Z,1516688385.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:45.286Z,1516688385.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:45.668Z,1516688385.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:45.683Z,1516688385.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:46.072Z,1516688386.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:46.087Z,1516688386.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:46.475Z,1516688386.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:46.489Z,1516688386.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:46.872Z,1516688386.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:46.887Z,1516688386.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:47.268Z,1516688387.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:47.283Z,1516688387.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:47.669Z,1516688387.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:47.683Z,1516688387.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:48.067Z,1516688388.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:48.089Z,1516688388.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:48.472Z,1516688388.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:48.486Z,1516688388.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:48.875Z,1516688388.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:48.896Z,1516688388.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:49.278Z,1516688389.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:49.297Z,1516688389.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:49.692Z,1516688389.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:49.706Z,1516688389.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:50.071Z,1516688390.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:50.085Z,1516688390.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:50.464Z,1516688390.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:50.487Z,1516688390.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:50.879Z,1516688390.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:50.901Z,1516688390.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:51.283Z,1516688391.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:51.297Z,1516688391.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:51.683Z,1516688391.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:51.697Z,1516688391.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:52.065Z,1516688392.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:52.087Z,1516688392.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:52.469Z,1516688392.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:52.488Z,1516688392.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:52.880Z,1516688392.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:52.894Z,1516688392.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:53.283Z,1516688393.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:53.297Z,1516688393.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:53.680Z,1516688393.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:53.700Z,1516688393.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:54.074Z,1516688394.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:54.089Z,1516688394.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:54.464Z,1516688394.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:54.485Z,1516688394.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:54.881Z,1516688394.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:54.895Z,1516688394.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:55.283Z,1516688395.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:55.297Z,1516688395.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:55.679Z,1516688395.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:55.693Z,1516688395.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:56.071Z,1516688396.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:56.085Z,1516688396.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:56.464Z,1516688396.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:56.486Z,1516688396.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:56.879Z,1516688396.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:56.894Z,1516688396.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:57.283Z,1516688397.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:57.305Z,1516688397.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:57.682Z,1516688397.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:57.701Z,1516688397.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:58.074Z,1516688398.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:58.088Z,1516688398.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:58.470Z,1516688398.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:58.488Z,1516688398.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:58.883Z,1516688398.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:58.897Z,1516688398.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:59.283Z,1516688399.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:59.297Z,1516688399.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:19:59.681Z,1516688399.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:19:59.700Z,1516688399.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:00.068Z,1516688400.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:00.088Z,1516688400.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:00.464Z,1516688400.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:00.496Z,1516688400.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:00.884Z,1516688400.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:00.904Z,1516688400.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:01.283Z,1516688401.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:01.305Z,1516688401.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:01.684Z,1516688401.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:01.699Z,1516688401.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:02.072Z,1516688402.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:02.086Z,1516688402.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:02.470Z,1516688402.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:02.485Z,1516688402.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:02.880Z,1516688402.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:02.894Z,1516688402.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:03.284Z,1516688403.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:03.298Z,1516688403.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:03.682Z,1516688403.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:03.696Z,1516688403.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:04.068Z,1516688404.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:04.088Z,1516688404.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:04.470Z,1516688404.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:04.485Z,1516688404.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:04.864Z,1516688404.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:04.887Z,1516688404.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:05.280Z,1516688405.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:05.295Z,1516688405.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:05.684Z,1516688405.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:05.704Z,1516688405.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:06.083Z,1516688406.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:06.105Z,1516688406.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:06.472Z,1516688406.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:06.492Z,1516688406.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:06.861Z,1516688406.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:06.893Z,1516688406.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:07.274Z,1516688407.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:07.289Z,1516688407.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:07.661Z,1516688407.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:07.693Z,1516688407.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:08.084Z,1516688408.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:08.098Z,1516688408.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:08.485Z,1516688408.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:08.505Z,1516688408.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:08.880Z,1516688408.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:08.894Z,1516688408.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:09.261Z,1516688409.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:09.296Z,1516688409.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:09.672Z,1516688409.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:09.691Z,1516688409.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:10.060Z,1516688410.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:10.085Z,1516688410.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:10.462Z,1516688410.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:10.498Z,1516688410.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:10.861Z,1516688410.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:10.897Z,1516688410.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:11.284Z,1516688411.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:11.298Z,1516688411.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:11.685Z,1516688411.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:11.704Z,1516688411.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:12.080Z,1516688412.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:12.094Z,1516688412.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:12.461Z,1516688412.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:12.493Z,1516688412.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:12.861Z,1516688412.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:12.896Z,1516688412.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:13.262Z,1516688413.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:13.289Z,1516688413.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:13.661Z,1516688413.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:13.693Z,1516688413.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:14.071Z,1516688414.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:14.097Z,1516688414.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:14.484Z,1516688414.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:14.498Z,1516688414.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:14.876Z,1516688414.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:14.897Z,1516688414.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:15.261Z,1516688415.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:15.298Z,1516688415.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:15.680Z,1516688415.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:15.698Z,1516688415.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:16.061Z,1516688416.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:16.093Z,1516688416.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:16.462Z,1516688416.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:16.498Z,1516688416.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:16.865Z,1516688416.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:16.891Z,1516688416.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:17.280Z,1516688417.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:17.298Z,1516688417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:17.685Z,1516688417.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:17.704Z,1516688417.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:18.081Z,1516688418.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:18.095Z,1516688418.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:18.469Z,1516688418.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:18.495Z,1516688418.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:18.862Z,1516688418.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:18.896Z,1516688418.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:19.263Z,1516688419.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:19.294Z,1516688419.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:19.661Z,1516688419.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:19.697Z,1516688419.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:20.080Z,1516688420.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:20.114Z,1516688420.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:20.473Z,1516688420.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:20.499Z,1516688420.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:20.873Z,1516688420.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:20.908Z,1516688420.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:21.262Z,1516688421.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:21.301Z,1516688421.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:21.660Z,1516688421.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:21.674Z,1516688421.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:22.061Z,1516688422.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:22.081Z,1516688422.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:22.471Z,1516688422.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:22.485Z,1516688422.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:22.869Z,1516688422.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:22.913Z,1516688422.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:23.285Z,1516688423.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:23.311Z,1516688423.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:23.698Z,1516688423.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:23.713Z,1516688423.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:24.076Z,1516688424.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:24.107Z,1516688424.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:24.466Z,1516688424.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:24.481Z,1516688424.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:24.866Z,1516688424.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:24.900Z,1516688424.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:25.267Z,1516688425.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:25.289Z,1516688425.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:25.669Z,1516688425.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:25.684Z,1516688425.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:26.072Z,1516688426.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:26.086Z,1516688426.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:26.476Z,1516688426.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:26.490Z,1516688426.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:26.872Z,1516688426.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:26.887Z,1516688426.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:27.269Z,1516688427.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:27.285Z,1516688427.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:27.667Z,1516688427.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:27.690Z,1516688427.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:28.068Z,1516688428.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:28.087Z,1516688428.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:28.472Z,1516688428.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:28.485Z,1516688428.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:31.569Z,1516688431.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:31.584Z,1516688431.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:31.700Z,1516688431.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:31.733Z,1516688431.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:32.044Z,1516688432.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:32.058Z,1516688432.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:32.452Z,1516688432.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:32.483Z,1516688432.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:32.834Z,1516688432.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:32.849Z,1516688432.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:33.232Z,1516688433.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:33.247Z,1516688433.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:33.632Z,1516688433.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:33.652Z,1516688433.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:34.036Z,1516688434.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:34.051Z,1516688434.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:34.440Z,1516688434.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:34.454Z,1516688434.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:34.836Z,1516688434.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:34.856Z,1516688434.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:35.235Z,1516688435.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:35.257Z,1516688435.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:35.633Z,1516688435.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:35.648Z,1516688435.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:36.034Z,1516688436.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:36.047Z,1516688436.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:36.430Z,1516688436.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:36.461Z,1516688436.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:36.837Z,1516688436.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:36.851Z,1516688436.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:37.240Z,1516688437.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:37.254Z,1516688437.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:37.644Z,1516688437.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:37.659Z,1516688437.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:38.040Z,1516688438.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:38.054Z,1516688438.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:38.433Z,1516688438.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:38.458Z,1516688438.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:38.834Z,1516688438.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:38.848Z,1516688438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:39.233Z,1516688439.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:39.252Z,1516688439.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:39.634Z,1516688439.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:39.649Z,1516688439.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:40.038Z,1516688440.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:40.054Z,1516688440.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:40.440Z,1516688440.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:40.461Z,1516688440.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:40.840Z,1516688440.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:40.861Z,1516688440.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:41.237Z,1516688441.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:41.252Z,1516688441.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:41.633Z,1516688441.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:41.648Z,1516688441.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:42.034Z,1516688442.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:42.048Z,1516688442.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:42.432Z,1516688442.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:42.451Z,1516688442.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:42.833Z,1516688442.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:42.853Z,1516688442.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:43.239Z,1516688443.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:43.261Z,1516688443.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:43.659Z,1516688443.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:43.685Z,1516688443.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:44.038Z,1516688444.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:44.057Z,1516688444.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:44.434Z,1516688444.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:44.448Z,1516688444.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:44.838Z,1516688444.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:44.853Z,1516688444.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:45.232Z,1516688445.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:45.250Z,1516688445.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:45.634Z,1516688445.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:45.648Z,1516688445.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:46.038Z,1516688446.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:46.053Z,1516688446.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:46.440Z,1516688446.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:46.454Z,1516688446.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:46.839Z,1516688446.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:46.853Z,1516688446.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:47.233Z,1516688447.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:47.247Z,1516688447.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:47.628Z,1516688447.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:47.657Z,1516688447.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:48.034Z,1516688448.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:48.048Z,1516688448.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:48.430Z,1516688448.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:48.451Z,1516688448.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:48.833Z,1516688448.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:48.847Z,1516688448.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:49.239Z,1516688449.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:49.261Z,1516688449.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:49.645Z,1516688449.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:49.665Z,1516688449.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:50.042Z,1516688450.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:50.061Z,1516688450.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:50.434Z,1516688450.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:50.448Z,1516688450.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:50.834Z,1516688450.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:50.848Z,1516688450.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:51.228Z,1516688451.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:51.254Z,1516688451.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:51.634Z,1516688451.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:51.656Z,1516688451.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:52.047Z,1516688452.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:52.062Z,1516688452.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:52.447Z,1516688452.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:52.461Z,1516688452.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:52.849Z,1516688452.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:52.863Z,1516688452.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:53.239Z,1516688453.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:53.253Z,1516688453.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:53.629Z,1516688453.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:53.652Z,1516688453.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:54.036Z,1516688454.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:54.050Z,1516688454.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:54.444Z,1516688454.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:54.458Z,1516688454.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:54.842Z,1516688454.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:54.861Z,1516688454.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:55.249Z,1516688455.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:55.264Z,1516688455.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:55.645Z,1516688455.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:55.673Z,1516688455.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:56.052Z,1516688456.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:56.066Z,1516688456.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:56.426Z,1516688456.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:56.455Z,1516688456.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:56.826Z,1516688456.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:56.857Z,1516688456.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:57.226Z,1516688457.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:57.262Z,1516688457.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:57.644Z,1516688457.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:57.659Z,1516688457.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:58.044Z,1516688458.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:58.059Z,1516688458.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:58.448Z,1516688458.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:58.468Z,1516688458.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:58.844Z,1516688458.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:58.858Z,1516688458.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:59.228Z,1516688459.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:59.265Z,1516688459.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:20:59.633Z,1516688459.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:20:59.660Z,1516688459.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:00.025Z,1516688460.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:00.064Z,1516688460.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:00.430Z,1516688460.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:00.462Z,1516688460.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:00.837Z,1516688460.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:00.862Z,1516688460.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:01.212Z,1516688461.212 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T06:21:01.212Z,1516688461.212 [NAL9602] Data Fault, FailCount= 2 2018-01-23T06:21:01.212Z,1516688461.212 [NAL9602](ERROR): Data Fault 2018-01-23T06:21:01.230Z,1516688461.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:01.269Z,1516688461.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:01.294Z,1516688461.294 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T06:21:01.605Z,1516688461.605 [NAL9602](INFO): Powering down 2018-01-23T06:21:01.632Z,1516688461.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:01.674Z,1516688461.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:02.034Z,1516688462.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:02.048Z,1516688462.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:02.434Z,1516688462.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:02.448Z,1516688462.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:02.460Z,1516688462.460 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:21:02.460Z,1516688462.460 [NAL9602] No Fault, FailCount= 2 2018-01-23T06:21:02.835Z,1516688462.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:02.850Z,1516688462.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:03.228Z,1516688463.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:03.255Z,1516688463.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:03.633Z,1516688463.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:03.647Z,1516688463.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:04.035Z,1516688464.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:04.050Z,1516688464.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:04.438Z,1516688464.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:04.452Z,1516688464.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:04.833Z,1516688464.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:04.847Z,1516688464.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:05.233Z,1516688465.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:05.247Z,1516688465.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:05.636Z,1516688465.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:05.650Z,1516688465.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:06.037Z,1516688466.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:06.051Z,1516688466.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:06.434Z,1516688466.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:06.448Z,1516688466.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:06.835Z,1516688466.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:06.853Z,1516688466.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:07.236Z,1516688467.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:07.250Z,1516688467.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:07.635Z,1516688467.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:07.649Z,1516688467.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:08.038Z,1516688468.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:08.052Z,1516688468.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:08.432Z,1516688468.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:08.446Z,1516688468.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:08.836Z,1516688468.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:08.850Z,1516688468.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:09.233Z,1516688469.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:09.248Z,1516688469.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:09.636Z,1516688469.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:09.650Z,1516688469.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:10.030Z,1516688470.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:10.044Z,1516688470.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:10.430Z,1516688470.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:10.461Z,1516688470.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:10.838Z,1516688470.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:10.852Z,1516688470.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:11.232Z,1516688471.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:11.259Z,1516688471.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:11.641Z,1516688471.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:11.656Z,1516688471.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:12.038Z,1516688472.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:12.052Z,1516688472.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:12.424Z,1516688472.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:12.455Z,1516688472.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:12.841Z,1516688472.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:12.855Z,1516688472.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:13.229Z,1516688473.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:13.263Z,1516688473.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:13.623Z,1516688473.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:13.663Z,1516688473.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:14.029Z,1516688474.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:14.060Z,1516688474.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:14.430Z,1516688474.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:14.469Z,1516688474.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:14.830Z,1516688474.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:14.861Z,1516688474.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:15.231Z,1516688475.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:15.246Z,1516688475.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:15.635Z,1516688475.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:15.650Z,1516688475.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:16.031Z,1516688476.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:16.046Z,1516688476.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:16.433Z,1516688476.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:16.453Z,1516688476.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:16.833Z,1516688476.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:16.848Z,1516688476.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:17.233Z,1516688477.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:17.247Z,1516688477.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:17.632Z,1516688477.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:17.653Z,1516688477.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:18.036Z,1516688478.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:18.050Z,1516688478.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:18.431Z,1516688478.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:18.449Z,1516688478.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:18.833Z,1516688478.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:18.854Z,1516688478.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:19.235Z,1516688479.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:19.250Z,1516688479.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:19.634Z,1516688479.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:19.678Z,1516688479.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:20.031Z,1516688480.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:20.054Z,1516688480.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:20.435Z,1516688480.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:20.449Z,1516688480.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:20.836Z,1516688480.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:20.850Z,1516688480.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:21.230Z,1516688481.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:21.257Z,1516688481.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:21.625Z,1516688481.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:21.669Z,1516688481.669 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:21.669Z,1516688481.669 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-01-23T06:21:21.669Z,1516688481.669 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:21:21.671Z,1516688481.671 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:21.671Z,1516688481.671 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-01-23T06:21:21.671Z,1516688481.671 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:21:21.684Z,1516688481.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:21.684Z,1516688481.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62 2018-01-23T06:21:21.684Z,1516688481.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:21:21.695Z,1516688481.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:21:21.696Z,1516688481.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:21:21.696Z,1516688481.696 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:21:22.026Z,1516688482.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:22.069Z,1516688482.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:21:22.070Z,1516688482.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-01-23T06:21:22.070Z,1516688482.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:21:22.070Z,1516688482.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-01-23T06:21:22.075Z,1516688482.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:21:22.075Z,1516688482.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62 2018-01-23T06:21:22.431Z,1516688482.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:22.449Z,1516688482.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:21:22.449Z,1516688482.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:21:22.450Z,1516688482.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:21:22.450Z,1516688482.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:21:22.450Z,1516688482.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:21:22.455Z,1516688482.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:21:22.455Z,1516688482.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:21:22.456Z,1516688482.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:21:22.456Z,1516688482.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:21:22.827Z,1516688482.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:22.870Z,1516688482.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:21:22.871Z,1516688482.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:23.229Z,1516688483.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:23.276Z,1516688483.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:21:23.277Z,1516688483.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:23.640Z,1516688483.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:23.646Z,1516688483.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T06:21:23.688Z,1516688483.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:21:23.689Z,1516688483.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:24.031Z,1516688484.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:24.045Z,1516688484.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:21:24.046Z,1516688484.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:24.435Z,1516688484.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:24.449Z,1516688484.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:21:24.450Z,1516688484.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:24.832Z,1516688484.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:24.864Z,1516688484.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:21:24.865Z,1516688484.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:25.234Z,1516688485.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:25.243Z,1516688485.243 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T06:21:25.260Z,1516688485.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:21:25.261Z,1516688485.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:25.632Z,1516688485.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:25.709Z,1516688485.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:21:25.710Z,1516688485.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:26.035Z,1516688486.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:26.054Z,1516688486.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:21:26.056Z,1516688486.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:26.425Z,1516688486.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:26.456Z,1516688486.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:21:26.457Z,1516688486.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:26.849Z,1516688486.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:26.896Z,1516688486.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:21:26.897Z,1516688486.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:27.225Z,1516688487.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:27.260Z,1516688487.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:21:27.261Z,1516688487.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:27.641Z,1516688487.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:27.655Z,1516688487.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:21:27.656Z,1516688487.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:28.022Z,1516688488.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:28.053Z,1516688488.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:21:28.054Z,1516688488.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:28.425Z,1516688488.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:28.463Z,1516688488.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:21:28.464Z,1516688488.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:28.842Z,1516688488.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:28.856Z,1516688488.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:21:28.857Z,1516688488.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:31.908Z,1516688491.908 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:21:31.925Z,1516688491.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:31.952Z,1516688491.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T06:21:31.953Z,1516688491.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:32.048Z,1516688492.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:32.062Z,1516688492.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:21:32.067Z,1516688492.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:32.423Z,1516688492.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:32.439Z,1516688492.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:21:32.440Z,1516688492.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:32.819Z,1516688492.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:32.844Z,1516688492.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:21:32.845Z,1516688492.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:33.207Z,1516688493.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:33.226Z,1516688493.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:21:33.227Z,1516688493.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:33.597Z,1516688493.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:33.633Z,1516688493.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:21:33.639Z,1516688493.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:34.006Z,1516688494.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:34.037Z,1516688494.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:21:34.038Z,1516688494.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:34.394Z,1516688494.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:34.417Z,1516688494.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T06:21:34.418Z,1516688494.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:34.797Z,1516688494.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:34.833Z,1516688494.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:21:34.834Z,1516688494.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:35.197Z,1516688495.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:35.234Z,1516688495.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:21:35.236Z,1516688495.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:35.594Z,1516688495.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:35.609Z,1516688495.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T06:21:35.610Z,1516688495.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:36.005Z,1516688496.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:36.036Z,1516688496.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:21:36.037Z,1516688496.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:36.409Z,1516688496.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:36.436Z,1516688496.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:21:36.437Z,1516688496.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:36.805Z,1516688496.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:36.838Z,1516688496.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:21:36.840Z,1516688496.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:37.201Z,1516688497.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:37.241Z,1516688497.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:21:37.242Z,1516688497.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:37.597Z,1516688497.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:37.645Z,1516688497.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:21:37.646Z,1516688497.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:37.994Z,1516688497.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:38.008Z,1516688498.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T06:21:38.009Z,1516688498.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:38.400Z,1516688498.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:38.414Z,1516688498.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T06:21:38.415Z,1516688498.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:38.805Z,1516688498.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:38.818Z,1516688498.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T06:21:38.819Z,1516688498.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:39.195Z,1516688499.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:39.209Z,1516688499.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T06:21:39.210Z,1516688499.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:39.609Z,1516688499.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:39.623Z,1516688499.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:21:39.624Z,1516688499.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:40.003Z,1516688500.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:40.017Z,1516688500.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T06:21:40.018Z,1516688500.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:40.402Z,1516688500.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:40.416Z,1516688500.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T06:21:40.416Z,1516688500.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:40.813Z,1516688500.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:40.827Z,1516688500.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:21:40.828Z,1516688500.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:41.204Z,1516688501.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:41.217Z,1516688501.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T06:21:41.218Z,1516688501.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:41.604Z,1516688501.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:41.618Z,1516688501.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T06:21:41.619Z,1516688501.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:42.006Z,1516688502.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:42.025Z,1516688502.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:42.408Z,1516688502.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:42.423Z,1516688502.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:42.780Z,1516688502.780 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:21:42.807Z,1516688502.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:42.825Z,1516688502.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:43.205Z,1516688503.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:43.221Z,1516688503.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:43.608Z,1516688503.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:43.623Z,1516688503.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:44.011Z,1516688504.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:44.025Z,1516688504.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:44.412Z,1516688504.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:44.426Z,1516688504.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:44.802Z,1516688504.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:44.828Z,1516688504.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:45.205Z,1516688505.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:45.219Z,1516688505.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:45.615Z,1516688505.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:45.637Z,1516688505.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:46.020Z,1516688506.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:46.034Z,1516688506.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:46.418Z,1516688506.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:46.433Z,1516688506.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:46.815Z,1516688506.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:46.829Z,1516688506.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:47.200Z,1516688507.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:47.230Z,1516688507.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:47.616Z,1516688507.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:47.630Z,1516688507.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:48.020Z,1516688508.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:48.034Z,1516688508.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:48.415Z,1516688508.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:48.430Z,1516688508.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:48.805Z,1516688508.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:48.820Z,1516688508.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:49.200Z,1516688509.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:49.233Z,1516688509.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:49.616Z,1516688509.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:49.630Z,1516688509.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:50.019Z,1516688510.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:50.034Z,1516688510.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:50.412Z,1516688510.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:50.443Z,1516688510.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:50.798Z,1516688510.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:50.825Z,1516688510.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:51.201Z,1516688511.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:51.236Z,1516688511.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:51.621Z,1516688511.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:51.636Z,1516688511.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:52.020Z,1516688512.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:52.035Z,1516688512.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:52.420Z,1516688512.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:52.435Z,1516688512.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:52.811Z,1516688512.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:52.833Z,1516688512.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:53.198Z,1516688513.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:53.233Z,1516688513.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:53.620Z,1516688513.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:53.635Z,1516688513.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:54.015Z,1516688514.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:54.048Z,1516688514.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:54.412Z,1516688514.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:54.443Z,1516688514.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:54.798Z,1516688514.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:54.825Z,1516688514.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:55.197Z,1516688515.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:55.212Z,1516688515.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:55.608Z,1516688515.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:55.649Z,1516688515.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:56.021Z,1516688516.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:56.043Z,1516688516.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:56.421Z,1516688516.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:56.445Z,1516688516.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:56.803Z,1516688516.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:56.826Z,1516688516.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:57.206Z,1516688517.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:57.220Z,1516688517.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:57.608Z,1516688517.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:57.623Z,1516688517.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:58.012Z,1516688518.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:58.026Z,1516688518.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:58.410Z,1516688518.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:58.425Z,1516688518.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:58.807Z,1516688518.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:58.821Z,1516688518.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:59.202Z,1516688519.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:59.223Z,1516688519.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:21:59.610Z,1516688519.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:21:59.625Z,1516688519.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:00.012Z,1516688520.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:00.026Z,1516688520.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:00.411Z,1516688520.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:00.433Z,1516688520.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:00.806Z,1516688520.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:00.820Z,1516688520.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:01.211Z,1516688521.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:01.225Z,1516688521.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:01.610Z,1516688521.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:01.637Z,1516688521.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:02.018Z,1516688522.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:02.033Z,1516688522.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:02.416Z,1516688522.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:02.430Z,1516688522.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:02.802Z,1516688522.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:02.825Z,1516688522.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:03.205Z,1516688523.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:03.219Z,1516688523.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:03.615Z,1516688523.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:03.637Z,1516688523.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:04.022Z,1516688524.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:04.041Z,1516688524.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:04.416Z,1516688524.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:04.430Z,1516688524.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:04.798Z,1516688524.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:04.833Z,1516688524.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:05.201Z,1516688525.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:05.228Z,1516688525.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:05.612Z,1516688525.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:05.633Z,1516688525.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:06.019Z,1516688526.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:06.038Z,1516688526.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:06.416Z,1516688526.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:06.430Z,1516688526.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:06.798Z,1516688526.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:06.829Z,1516688526.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:07.197Z,1516688527.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:07.224Z,1516688527.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:07.608Z,1516688527.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:07.634Z,1516688527.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:08.012Z,1516688528.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:08.037Z,1516688528.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:08.408Z,1516688528.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:08.443Z,1516688528.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:08.798Z,1516688528.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:08.837Z,1516688528.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:09.201Z,1516688529.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:09.215Z,1516688529.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:09.616Z,1516688529.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:09.642Z,1516688529.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:10.016Z,1516688530.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:10.042Z,1516688530.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:10.420Z,1516688530.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:10.446Z,1516688530.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:10.810Z,1516688530.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:10.844Z,1516688530.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:11.202Z,1516688531.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:11.217Z,1516688531.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:11.615Z,1516688531.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:11.637Z,1516688531.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:12.020Z,1516688532.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:12.050Z,1516688532.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:12.420Z,1516688532.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:12.451Z,1516688532.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:12.808Z,1516688532.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:12.823Z,1516688532.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:13.204Z,1516688533.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:13.233Z,1516688533.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:13.616Z,1516688533.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:13.630Z,1516688533.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:14.016Z,1516688534.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:14.030Z,1516688534.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:14.417Z,1516688534.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:14.432Z,1516688534.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:14.805Z,1516688534.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:14.826Z,1516688534.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:15.205Z,1516688535.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:15.220Z,1516688535.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:15.616Z,1516688535.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:15.630Z,1516688535.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:16.015Z,1516688536.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:16.029Z,1516688536.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:16.414Z,1516688536.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:16.430Z,1516688536.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:16.807Z,1516688536.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:16.821Z,1516688536.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:17.201Z,1516688537.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:17.225Z,1516688537.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:17.614Z,1516688537.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:17.629Z,1516688537.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:18.015Z,1516688538.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:18.029Z,1516688538.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:18.415Z,1516688538.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:18.429Z,1516688538.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:18.804Z,1516688538.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:18.823Z,1516688538.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:19.204Z,1516688539.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:19.229Z,1516688539.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:19.616Z,1516688539.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:19.630Z,1516688539.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:20.014Z,1516688540.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:20.029Z,1516688540.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:20.415Z,1516688540.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:20.436Z,1516688540.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:20.811Z,1516688540.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:20.825Z,1516688540.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:21.204Z,1516688541.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:21.223Z,1516688541.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:21.615Z,1516688541.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:21.629Z,1516688541.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:22.018Z,1516688542.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:22.033Z,1516688542.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:22.416Z,1516688542.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:22.430Z,1516688542.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:22.806Z,1516688542.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:22.821Z,1516688542.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:23.210Z,1516688543.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:23.225Z,1516688543.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:23.604Z,1516688543.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:23.622Z,1516688543.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:24.015Z,1516688544.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:24.029Z,1516688544.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:24.419Z,1516688544.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:24.434Z,1516688544.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:24.815Z,1516688544.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:24.830Z,1516688544.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:25.206Z,1516688545.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:25.220Z,1516688545.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:25.600Z,1516688545.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:25.633Z,1516688545.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:26.009Z,1516688546.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:26.024Z,1516688546.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:26.414Z,1516688546.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:26.427Z,1516688546.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:26.817Z,1516688546.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:26.831Z,1516688546.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:27.219Z,1516688547.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:27.233Z,1516688547.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:27.614Z,1516688547.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:27.638Z,1516688547.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:27.997Z,1516688547.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:28.033Z,1516688548.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:28.397Z,1516688548.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:28.423Z,1516688548.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:28.797Z,1516688548.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:28.831Z,1516688548.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:29.211Z,1516688549.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:29.225Z,1516688549.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:32.325Z,1516688552.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:32.339Z,1516688552.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:32.470Z,1516688552.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:32.517Z,1516688552.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:32.819Z,1516688552.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:32.840Z,1516688552.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:33.225Z,1516688553.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:33.239Z,1516688553.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:33.598Z,1516688553.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:33.624Z,1516688553.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:33.999Z,1516688553.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:34.029Z,1516688554.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:34.402Z,1516688554.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:34.429Z,1516688554.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:34.822Z,1516688554.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:34.836Z,1516688554.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:35.216Z,1516688555.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:35.238Z,1516688555.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:35.617Z,1516688555.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:35.643Z,1516688555.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:35.997Z,1516688555.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:36.030Z,1516688556.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:36.397Z,1516688556.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:36.430Z,1516688556.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:36.797Z,1516688556.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:36.831Z,1516688556.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:37.196Z,1516688557.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:37.218Z,1516688557.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:37.597Z,1516688557.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:37.633Z,1516688557.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:38.008Z,1516688558.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:38.043Z,1516688558.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:38.408Z,1516688558.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:38.441Z,1516688558.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:38.820Z,1516688558.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:38.834Z,1516688558.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:39.197Z,1516688559.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:39.234Z,1516688559.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:39.595Z,1516688559.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:39.609Z,1516688559.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:39.998Z,1516688559.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:40.012Z,1516688560.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:40.396Z,1516688560.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:40.410Z,1516688560.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:40.816Z,1516688560.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:40.838Z,1516688560.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:41.230Z,1516688561.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:41.245Z,1516688561.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:41.620Z,1516688561.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:41.652Z,1516688561.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:41.998Z,1516688561.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:42.017Z,1516688562.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:42.402Z,1516688562.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:42.416Z,1516688562.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:42.802Z,1516688562.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:42.816Z,1516688562.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:43.197Z,1516688563.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:43.217Z,1516688563.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:43.609Z,1516688563.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:43.654Z,1516688563.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:44.020Z,1516688564.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:44.053Z,1516688564.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:44.408Z,1516688564.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:44.422Z,1516688564.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:44.808Z,1516688564.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:44.822Z,1516688564.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:45.206Z,1516688565.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:45.220Z,1516688565.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:45.604Z,1516688565.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:45.619Z,1516688565.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:46.002Z,1516688566.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:46.030Z,1516688566.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:46.406Z,1516688566.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:46.420Z,1516688566.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:46.808Z,1516688566.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:46.823Z,1516688566.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:47.212Z,1516688567.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:47.226Z,1516688567.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:47.620Z,1516688567.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:47.653Z,1516688567.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:48.002Z,1516688568.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:48.024Z,1516688568.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:48.405Z,1516688568.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:48.420Z,1516688568.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:48.807Z,1516688568.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:48.828Z,1516688568.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:49.202Z,1516688569.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:49.224Z,1516688569.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:49.600Z,1516688569.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:49.635Z,1516688569.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:50.020Z,1516688570.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:50.034Z,1516688570.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:50.415Z,1516688570.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:50.438Z,1516688570.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:50.820Z,1516688570.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:50.834Z,1516688570.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:51.199Z,1516688571.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:51.234Z,1516688571.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:51.596Z,1516688571.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:51.631Z,1516688571.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:51.999Z,1516688571.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:52.038Z,1516688572.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:52.398Z,1516688572.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:52.435Z,1516688572.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:52.819Z,1516688572.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:52.834Z,1516688572.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:53.217Z,1516688573.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:53.239Z,1516688573.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:53.616Z,1516688573.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:53.641Z,1516688573.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:53.995Z,1516688573.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:54.017Z,1516688574.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:54.397Z,1516688574.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:54.435Z,1516688574.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:54.797Z,1516688574.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:54.836Z,1516688574.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:55.196Z,1516688575.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:55.210Z,1516688575.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:55.597Z,1516688575.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:55.633Z,1516688575.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:56.008Z,1516688576.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:56.043Z,1516688576.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:56.408Z,1516688576.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:56.439Z,1516688576.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:56.816Z,1516688576.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:56.840Z,1516688576.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:57.202Z,1516688577.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:57.220Z,1516688577.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:57.599Z,1516688577.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:57.613Z,1516688577.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:58.010Z,1516688578.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:58.044Z,1516688578.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:58.402Z,1516688578.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:58.415Z,1516688578.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:58.812Z,1516688578.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:58.826Z,1516688578.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:59.216Z,1516688579.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:59.230Z,1516688579.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:22:59.608Z,1516688579.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:22:59.628Z,1516688579.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:00.002Z,1516688580.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:00.020Z,1516688580.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:00.400Z,1516688580.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:00.429Z,1516688580.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:00.810Z,1516688580.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:00.824Z,1516688580.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:01.203Z,1516688581.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:01.222Z,1516688581.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:01.605Z,1516688581.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:01.620Z,1516688581.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:02.015Z,1516688582.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:02.029Z,1516688582.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:02.414Z,1516688582.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:02.433Z,1516688582.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:02.814Z,1516688582.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:02.833Z,1516688582.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:03.206Z,1516688583.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:03.220Z,1516688583.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:03.602Z,1516688583.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:03.620Z,1516688583.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:04.000Z,1516688584.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:04.022Z,1516688584.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:04.405Z,1516688584.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:04.419Z,1516688584.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:04.815Z,1516688584.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:04.830Z,1516688584.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:05.218Z,1516688585.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:05.237Z,1516688585.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:05.616Z,1516688585.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:05.630Z,1516688585.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:06.000Z,1516688586.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:06.022Z,1516688586.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:06.415Z,1516688586.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:06.429Z,1516688586.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:06.805Z,1516688586.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:06.824Z,1516688586.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:07.206Z,1516688587.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:07.220Z,1516688587.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:07.600Z,1516688587.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:07.631Z,1516688587.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:08.017Z,1516688588.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:08.031Z,1516688588.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:08.420Z,1516688588.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:08.434Z,1516688588.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:08.819Z,1516688588.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:08.833Z,1516688588.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:09.207Z,1516688589.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:09.220Z,1516688589.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:09.600Z,1516688589.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:09.625Z,1516688589.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:10.017Z,1516688590.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:10.037Z,1516688590.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:10.407Z,1516688590.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:10.428Z,1516688590.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:10.820Z,1516688590.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:10.834Z,1516688590.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:11.216Z,1516688591.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:11.236Z,1516688591.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:11.616Z,1516688591.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:11.657Z,1516688591.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:11.995Z,1516688591.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:12.022Z,1516688592.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:12.397Z,1516688592.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:12.423Z,1516688592.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:12.797Z,1516688592.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:12.836Z,1516688592.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:13.196Z,1516688593.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:13.222Z,1516688593.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:13.597Z,1516688593.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:13.629Z,1516688593.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:14.018Z,1516688594.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:14.032Z,1516688594.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:14.418Z,1516688594.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:14.438Z,1516688594.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:14.812Z,1516688594.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:14.833Z,1516688594.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:15.198Z,1516688595.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:15.234Z,1516688595.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:15.595Z,1516688595.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:15.617Z,1516688595.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:15.998Z,1516688595.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:16.024Z,1516688596.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:16.397Z,1516688596.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:16.441Z,1516688596.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:16.812Z,1516688596.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:16.838Z,1516688596.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:17.212Z,1516688597.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:17.249Z,1516688597.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:17.616Z,1516688597.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:17.649Z,1516688597.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:18.001Z,1516688598.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:18.021Z,1516688598.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:18.405Z,1516688598.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:18.425Z,1516688598.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:18.807Z,1516688598.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:18.821Z,1516688598.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:19.201Z,1516688599.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:19.219Z,1516688599.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:19.602Z,1516688599.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:19.621Z,1516688599.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:20.012Z,1516688600.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:20.027Z,1516688600.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:20.408Z,1516688600.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:20.422Z,1516688600.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:20.808Z,1516688600.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:20.822Z,1516688600.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:21.205Z,1516688601.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:21.220Z,1516688601.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:21.603Z,1516688601.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:21.622Z,1516688601.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:22.004Z,1516688602.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:22.019Z,1516688602.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:22.405Z,1516688602.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:22.421Z,1516688602.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:22.808Z,1516688602.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:22.823Z,1516688602.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:23.212Z,1516688603.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:23.226Z,1516688603.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:23.608Z,1516688603.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:23.623Z,1516688603.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:24.003Z,1516688604.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:24.025Z,1516688604.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:24.406Z,1516688604.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:24.420Z,1516688604.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:24.805Z,1516688604.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:24.827Z,1516688604.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:25.210Z,1516688605.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:25.225Z,1516688605.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:25.605Z,1516688605.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:25.619Z,1516688605.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:26.010Z,1516688606.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:26.041Z,1516688606.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:26.417Z,1516688606.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:26.437Z,1516688606.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:26.815Z,1516688606.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:26.829Z,1516688606.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:27.202Z,1516688607.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:27.233Z,1516688607.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:27.608Z,1516688607.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:27.627Z,1516688607.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:27.998Z,1516688607.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:28.024Z,1516688608.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:28.027Z,1516688608.027 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:23:28.027Z,1516688608.027 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:23:28.027Z,1516688608.027 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:23:28.027Z,1516688608.027 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:23:28.415Z,1516688608.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:28.429Z,1516688608.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:28.432Z,1516688608.432 [Default:CheckIn:D] Stopped 2018-01-23T06:23:28.432Z,1516688608.432 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:23:28.812Z,1516688608.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:28.839Z,1516688608.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:28.842Z,1516688608.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.606201 min 2018-01-23T06:23:28.842Z,1516688608.842 [Default:CheckIn:E] Stopped 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn] Stopped 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn](INFO): Running loop #19 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn] Running Loop=19 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:23:28.847Z,1516688608.847 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:23:29.216Z,1516688609.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:29.238Z,1516688609.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:29.620Z,1516688609.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:29.641Z,1516688609.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:32.697Z,1516688612.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:32.725Z,1516688612.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:32.808Z,1516688612.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:32.841Z,1516688612.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:33.196Z,1516688613.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:33.210Z,1516688613.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:33.595Z,1516688613.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:33.610Z,1516688613.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:33.991Z,1516688613.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:34.006Z,1516688614.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:34.369Z,1516688614.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:34.401Z,1516688614.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:34.785Z,1516688614.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:34.799Z,1516688614.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:35.186Z,1516688615.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:35.200Z,1516688615.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:35.569Z,1516688615.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:35.600Z,1516688615.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:35.992Z,1516688615.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:36.006Z,1516688616.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:36.389Z,1516688616.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:36.415Z,1516688616.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:36.795Z,1516688616.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:36.809Z,1516688616.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:37.170Z,1516688617.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:37.197Z,1516688617.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:37.567Z,1516688617.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:37.601Z,1516688617.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:37.970Z,1516688617.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:38.001Z,1516688618.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:38.369Z,1516688618.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:38.397Z,1516688618.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:38.788Z,1516688618.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:38.803Z,1516688618.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:39.188Z,1516688619.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:39.219Z,1516688619.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:39.592Z,1516688619.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:39.606Z,1516688619.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:39.974Z,1516688619.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:39.000Z,1516688620.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:40.369Z,1516688620.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:40.396Z,1516688620.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:40.793Z,1516688620.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:40.808Z,1516688620.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:41.180Z,1516688621.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:41.213Z,1516688621.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:41.580Z,1516688621.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:41.606Z,1516688621.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:41.970Z,1516688621.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:42.006Z,1516688622.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:42.367Z,1516688622.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:42.381Z,1516688622.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:42.780Z,1516688622.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:42.805Z,1516688622.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:43.184Z,1516688623.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:43.219Z,1516688623.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:43.580Z,1516688623.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:43.614Z,1516688623.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:43.970Z,1516688623.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:44.009Z,1516688624.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:44.369Z,1516688624.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:44.383Z,1516688624.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:44.788Z,1516688624.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:44.813Z,1516688624.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:45.192Z,1516688625.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:45.217Z,1516688625.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:45.588Z,1516688625.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:45.611Z,1516688625.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:45.975Z,1516688625.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:45.990Z,1516688625.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:46.375Z,1516688626.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:46.389Z,1516688626.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:46.784Z,1516688626.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:46.798Z,1516688626.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:47.181Z,1516688627.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:47.196Z,1516688627.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:47.585Z,1516688627.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:47.599Z,1516688627.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:47.978Z,1516688627.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:47.993Z,1516688627.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:48.372Z,1516688628.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:48.396Z,1516688628.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:48.784Z,1516688628.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:48.800Z,1516688628.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:49.184Z,1516688629.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:49.204Z,1516688629.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:49.583Z,1516688629.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:49.601Z,1516688629.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:49.976Z,1516688629.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:49.995Z,1516688629.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:50.378Z,1516688630.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:50.392Z,1516688630.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:50.784Z,1516688630.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:50.799Z,1516688630.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:51.184Z,1516688631.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:51.198Z,1516688631.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:51.584Z,1516688631.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:51.604Z,1516688631.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:51.981Z,1516688631.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:52.001Z,1516688632.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:52.380Z,1516688632.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:52.395Z,1516688632.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:52.784Z,1516688632.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:52.804Z,1516688632.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:53.185Z,1516688633.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:53.203Z,1516688633.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:53.587Z,1516688633.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:53.601Z,1516688633.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:53.976Z,1516688633.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:54.003Z,1516688634.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:54.371Z,1516688634.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:54.394Z,1516688634.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:54.791Z,1516688634.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:54.806Z,1516688634.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:55.191Z,1516688635.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:55.221Z,1516688635.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:55.588Z,1516688635.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:55.602Z,1516688635.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:55.970Z,1516688635.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:56.001Z,1516688636.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:56.386Z,1516688636.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:56.401Z,1516688636.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:56.784Z,1516688636.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:56.811Z,1516688636.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:57.188Z,1516688637.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:57.209Z,1516688637.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:57.589Z,1516688637.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:57.603Z,1516688637.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:57.970Z,1516688637.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:57.996Z,1516688637.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:58.369Z,1516688638.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:58.401Z,1516688638.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:58.784Z,1516688638.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:58.826Z,1516688638.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:59.188Z,1516688639.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:59.202Z,1516688639.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:59.584Z,1516688639.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:23:59.605Z,1516688639.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:23:59.971Z,1516688639.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:00.001Z,1516688640.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:00.369Z,1516688640.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:00.394Z,1516688640.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:00.784Z,1516688640.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:00.814Z,1516688640.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:01.193Z,1516688641.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:01.207Z,1516688641.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:01.584Z,1516688641.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:01.614Z,1516688641.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:01.970Z,1516688641.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:01.995Z,1516688641.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:02.369Z,1516688642.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:02.405Z,1516688642.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:02.792Z,1516688642.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:02.806Z,1516688642.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:03.192Z,1516688643.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:03.206Z,1516688643.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:03.588Z,1516688643.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:03.608Z,1516688643.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:03.970Z,1516688643.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:04.001Z,1516688644.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:04.369Z,1516688644.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:04.401Z,1516688644.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:04.784Z,1516688644.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:04.817Z,1516688644.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:05.184Z,1516688645.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:05.218Z,1516688645.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:05.580Z,1516688645.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:05.605Z,1516688645.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:05.971Z,1516688645.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:06.011Z,1516688646.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:06.378Z,1516688646.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:06.409Z,1516688646.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:06.780Z,1516688646.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:06.811Z,1516688646.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:07.202Z,1516688647.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:07.216Z,1516688647.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:07.584Z,1516688647.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:07.615Z,1516688647.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:07.979Z,1516688647.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:07.993Z,1516688647.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:08.378Z,1516688648.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:08.393Z,1516688648.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:08.789Z,1516688648.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:08.815Z,1516688648.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:09.192Z,1516688649.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:09.223Z,1516688649.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:09.586Z,1516688649.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:09.605Z,1516688649.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:09.979Z,1516688649.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:09.994Z,1516688649.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:10.374Z,1516688650.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:10.401Z,1516688650.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:10.790Z,1516688650.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:10.805Z,1516688650.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:11.192Z,1516688651.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:11.207Z,1516688651.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:11.585Z,1516688651.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:11.616Z,1516688651.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:11.970Z,1516688651.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:11.998Z,1516688651.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:12.369Z,1516688652.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:12.402Z,1516688652.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:12.784Z,1516688652.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:12.812Z,1516688652.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:13.197Z,1516688653.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:13.212Z,1516688653.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:13.588Z,1516688653.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:13.602Z,1516688653.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:13.969Z,1516688653.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:14.001Z,1516688654.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:14.370Z,1516688654.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:14.408Z,1516688654.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:14.769Z,1516688654.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:14.794Z,1516688654.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:15.184Z,1516688655.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:15.214Z,1516688655.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:15.592Z,1516688655.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:15.606Z,1516688655.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:15.984Z,1516688655.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:16.005Z,1516688656.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:16.019Z,1516688656.019 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:24:16.369Z,1516688656.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:16.406Z,1516688656.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:16.769Z,1516688656.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:16.806Z,1516688656.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:17.174Z,1516688657.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:17.200Z,1516688657.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:17.569Z,1516688657.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:17.601Z,1516688657.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:17.994Z,1516688657.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:18.008Z,1516688658.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:18.396Z,1516688658.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:18.417Z,1516688658.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:18.780Z,1516688658.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:18.805Z,1516688658.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:19.169Z,1516688659.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:19.206Z,1516688659.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:19.573Z,1516688659.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:19.604Z,1516688659.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:19.969Z,1516688659.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:20.004Z,1516688660.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:20.370Z,1516688660.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:20.406Z,1516688660.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:20.773Z,1516688660.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:20.804Z,1516688660.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:21.180Z,1516688661.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:21.213Z,1516688661.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:21.593Z,1516688661.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:21.612Z,1516688661.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:21.980Z,1516688661.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:22.013Z,1516688662.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:22.369Z,1516688662.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:22.400Z,1516688662.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:22.769Z,1516688662.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:22.783Z,1516688662.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:22.783Z,1516688662.783 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-01-23T06:24:22.784Z,1516688662.784 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:24:22.785Z,1516688662.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:22.785Z,1516688662.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-01-23T06:24:22.785Z,1516688662.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:24:22.811Z,1516688662.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:22.811Z,1516688662.811 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63 2018-01-23T06:24:22.811Z,1516688662.811 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:24:22.829Z,1516688662.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:24:22.829Z,1516688662.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:24:22.829Z,1516688662.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:24:23.171Z,1516688663.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:23.219Z,1516688663.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:24:23.219Z,1516688663.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-01-23T06:24:23.220Z,1516688663.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:24:23.220Z,1516688663.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-01-23T06:24:23.220Z,1516688663.220 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:24:23.220Z,1516688663.220 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63 2018-01-23T06:24:23.573Z,1516688663.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:23.591Z,1516688663.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:24:23.591Z,1516688663.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:24:23.592Z,1516688663.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:24:23.592Z,1516688663.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:24:23.592Z,1516688663.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:24:23.593Z,1516688663.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:24:23.593Z,1516688663.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:24:23.594Z,1516688663.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:24:23.594Z,1516688663.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:24:23.988Z,1516688663.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:24.002Z,1516688664.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:24:24.003Z,1516688664.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:24.387Z,1516688664.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:24.401Z,1516688664.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:24:24.402Z,1516688664.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:24.788Z,1516688664.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:24.802Z,1516688664.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:24:24.803Z,1516688664.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:25.179Z,1516688665.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:25.193Z,1516688665.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:24:25.193Z,1516688665.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:25.585Z,1516688665.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:25.604Z,1516688665.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:24:25.605Z,1516688665.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:25.983Z,1516688665.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:25.997Z,1516688665.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:24:25.998Z,1516688665.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:26.380Z,1516688666.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:26.394Z,1516688666.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:24:26.395Z,1516688666.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:26.772Z,1516688666.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:26.800Z,1516688666.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:24:26.801Z,1516688666.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:27.188Z,1516688667.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:27.202Z,1516688667.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:24:27.203Z,1516688667.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:27.592Z,1516688667.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:27.605Z,1516688667.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:24:27.606Z,1516688667.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:27.988Z,1516688667.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:28.002Z,1516688668.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:24:28.003Z,1516688668.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:28.377Z,1516688668.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:28.397Z,1516688668.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:24:28.398Z,1516688668.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:28.778Z,1516688668.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:28.792Z,1516688668.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:24:28.793Z,1516688668.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:29.176Z,1516688669.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:29.195Z,1516688669.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:24:29.196Z,1516688669.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:29.573Z,1516688669.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:29.594Z,1516688669.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:24:29.595Z,1516688669.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:29.988Z,1516688669.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:30.002Z,1516688670.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:24:30.003Z,1516688670.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:33.088Z,1516688673.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:33.103Z,1516688673.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T06:24:33.104Z,1516688673.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:33.212Z,1516688673.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:33.236Z,1516688673.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T06:24:33.237Z,1516688673.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:33.573Z,1516688673.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:33.594Z,1516688673.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:24:33.595Z,1516688673.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:33.978Z,1516688673.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:34.004Z,1516688674.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:24:34.005Z,1516688674.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:34.367Z,1516688674.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:34.400Z,1516688674.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:24:34.401Z,1516688674.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:34.786Z,1516688674.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:34.800Z,1516688674.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:24:34.801Z,1516688674.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:35.184Z,1516688675.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:35.207Z,1516688675.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:24:35.208Z,1516688675.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:35.588Z,1516688675.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:35.608Z,1516688675.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:24:35.609Z,1516688675.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:35.984Z,1516688675.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:36.005Z,1516688676.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:24:36.006Z,1516688676.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:36.370Z,1516688676.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:36.404Z,1516688676.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:24:36.405Z,1516688676.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:36.769Z,1516688676.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:36.807Z,1516688676.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:24:36.808Z,1516688676.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:37.178Z,1516688677.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:37.203Z,1516688677.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:24:37.204Z,1516688677.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:37.570Z,1516688677.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:37.606Z,1516688677.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:24:37.607Z,1516688677.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:37.980Z,1516688677.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:38.012Z,1516688678.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:24:38.013Z,1516688678.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:38.392Z,1516688678.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:38.406Z,1516688678.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:24:38.407Z,1516688678.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:38.801Z,1516688678.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:38.815Z,1516688678.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:24:38.816Z,1516688678.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:39.169Z,1516688679.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:39.204Z,1516688679.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:24:39.205Z,1516688679.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:39.569Z,1516688679.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:39.604Z,1516688679.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:24:39.605Z,1516688679.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:39.970Z,1516688679.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:40.006Z,1516688680.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:24:40.007Z,1516688680.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:40.374Z,1516688680.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:40.404Z,1516688680.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:24:40.405Z,1516688680.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:40.777Z,1516688680.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:40.807Z,1516688680.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:24:40.808Z,1516688680.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:41.184Z,1516688681.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:41.211Z,1516688681.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:24:41.212Z,1516688681.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:41.584Z,1516688681.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:41.609Z,1516688681.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:24:41.610Z,1516688681.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:41.000Z,1516688682.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:42.014Z,1516688682.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:24:42.015Z,1516688682.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:42.374Z,1516688682.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:42.408Z,1516688682.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:24:42.409Z,1516688682.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:42.777Z,1516688682.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:42.813Z,1516688682.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:43.176Z,1516688683.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:43.191Z,1516688683.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:43.585Z,1516688683.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:43.615Z,1516688683.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:43.992Z,1516688683.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:44.027Z,1516688684.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:44.392Z,1516688684.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:44.406Z,1516688684.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:44.786Z,1516688684.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:44.805Z,1516688684.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:45.181Z,1516688685.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:45.201Z,1516688685.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:45.582Z,1516688685.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:45.601Z,1516688685.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:45.984Z,1516688685.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:45.999Z,1516688685.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:46.376Z,1516688686.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:46.398Z,1516688686.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:46.788Z,1516688686.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:46.802Z,1516688686.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:47.189Z,1516688687.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:47.209Z,1516688687.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:47.592Z,1516688687.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:47.609Z,1516688687.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:47.991Z,1516688687.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:48.005Z,1516688688.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:48.379Z,1516688688.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:48.402Z,1516688688.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:48.786Z,1516688688.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:48.809Z,1516688688.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:49.187Z,1516688689.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:49.202Z,1516688689.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:49.569Z,1516688689.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:49.609Z,1516688689.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:49.981Z,1516688689.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:50.017Z,1516688690.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:50.392Z,1516688690.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:50.421Z,1516688690.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:50.796Z,1516688690.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:50.812Z,1516688690.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:51.169Z,1516688691.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:51.209Z,1516688691.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:51.580Z,1516688691.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:51.611Z,1516688691.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:51.977Z,1516688691.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:52.003Z,1516688692.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:52.378Z,1516688692.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:52.393Z,1516688692.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:52.780Z,1516688692.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:52.817Z,1516688692.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:53.185Z,1516688693.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:53.199Z,1516688693.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:53.592Z,1516688693.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:53.606Z,1516688693.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:53.996Z,1516688693.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:54.010Z,1516688694.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:54.382Z,1516688694.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:54.396Z,1516688694.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:54.788Z,1516688694.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:54.803Z,1516688694.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:55.176Z,1516688695.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:55.203Z,1516688695.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:55.586Z,1516688695.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:55.600Z,1516688695.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:55.991Z,1516688695.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:56.005Z,1516688696.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:56.394Z,1516688696.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:56.408Z,1516688696.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:56.789Z,1516688696.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:56.803Z,1516688696.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:57.175Z,1516688697.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:57.197Z,1516688697.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:57.589Z,1516688697.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:57.609Z,1516688697.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:57.980Z,1516688697.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:58.005Z,1516688698.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:58.385Z,1516688698.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:58.399Z,1516688698.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:58.773Z,1516688698.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:58.809Z,1516688698.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:59.196Z,1516688699.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:59.216Z,1516688699.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:59.598Z,1516688699.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:24:59.617Z,1516688699.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:24:59.990Z,1516688699.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:00.004Z,1516688700.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:00.372Z,1516688700.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:00.405Z,1516688700.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:00.784Z,1516688700.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:00.803Z,1516688700.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:01.170Z,1516688701.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:01.202Z,1516688701.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:01.576Z,1516688701.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:01.604Z,1516688701.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:01.981Z,1516688701.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:02.013Z,1516688702.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:02.404Z,1516688702.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:02.418Z,1516688702.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:02.780Z,1516688702.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:02.809Z,1516688702.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:03.169Z,1516688703.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:03.202Z,1516688703.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:03.580Z,1516688703.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:03.606Z,1516688703.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:03.972Z,1516688703.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:04.013Z,1516688704.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:04.375Z,1516688704.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:04.413Z,1516688704.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:04.780Z,1516688704.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:04.787Z,1516688704.787 [PNI_TCM](ERROR): CRC does not match. Expected:0x46001 got:0x10898 2018-01-23T06:25:04.819Z,1516688704.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:05.192Z,1516688705.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:05.217Z,1516688705.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:05.592Z,1516688705.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:05.621Z,1516688705.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:05.994Z,1516688705.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:06.018Z,1516688706.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:06.385Z,1516688706.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:06.417Z,1516688706.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:06.780Z,1516688706.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:06.813Z,1516688706.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:07.179Z,1516688707.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:07.222Z,1516688707.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:07.581Z,1516688707.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:07.616Z,1516688707.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:07.990Z,1516688707.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:07.998Z,1516688707.998 [PNI_TCM](ERROR): CRC does not match. Expected:0x44754 got:0x7618 2018-01-23T06:25:08.025Z,1516688708.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:08.397Z,1516688708.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:08.421Z,1516688708.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:08.792Z,1516688708.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:08.814Z,1516688708.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:09.174Z,1516688709.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:09.216Z,1516688709.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:09.574Z,1516688709.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:09.597Z,1516688709.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:09.980Z,1516688709.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:09.994Z,1516688709.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:10.376Z,1516688710.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:10.399Z,1516688710.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:10.777Z,1516688710.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:10.821Z,1516688710.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:11.185Z,1516688711.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:11.201Z,1516688711.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:11.590Z,1516688711.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:11.625Z,1516688711.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:11.987Z,1516688711.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:12.001Z,1516688712.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:12.378Z,1516688712.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:12.404Z,1516688712.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:12.777Z,1516688712.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:12.796Z,1516688712.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:13.178Z,1516688713.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:13.198Z,1516688713.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:13.581Z,1516688713.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:13.595Z,1516688713.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:13.998Z,1516688713.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:14.030Z,1516688714.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:14.384Z,1516688714.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:14.428Z,1516688714.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:14.786Z,1516688714.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:14.793Z,1516688714.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x7420 got:0x0 2018-01-23T06:25:14.831Z,1516688714.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:15.184Z,1516688715.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:15.199Z,1516688715.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:15.577Z,1516688715.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:15.610Z,1516688715.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:15.978Z,1516688715.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:15.997Z,1516688715.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:16.374Z,1516688716.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:16.401Z,1516688716.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:16.779Z,1516688716.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:16.794Z,1516688716.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:17.183Z,1516688717.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:17.223Z,1516688717.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:17.588Z,1516688717.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:17.606Z,1516688717.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:17.989Z,1516688717.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:18.003Z,1516688718.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:18.377Z,1516688718.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:18.405Z,1516688718.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:18.777Z,1516688718.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:18.826Z,1516688718.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:19.173Z,1516688719.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:19.198Z,1516688719.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:19.577Z,1516688719.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:19.596Z,1516688719.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:19.989Z,1516688719.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:20.009Z,1516688720.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:20.389Z,1516688720.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:20.426Z,1516688720.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:20.789Z,1516688720.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:20.807Z,1516688720.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:21.176Z,1516688721.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:21.199Z,1516688721.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:21.572Z,1516688721.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:21.604Z,1516688721.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:21.982Z,1516688721.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:22.005Z,1516688722.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:22.384Z,1516688722.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:22.410Z,1516688722.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:22.785Z,1516688722.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:22.810Z,1516688722.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:23.194Z,1516688723.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:23.220Z,1516688723.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:23.588Z,1516688723.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:23.632Z,1516688723.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:23.984Z,1516688723.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:24.017Z,1516688724.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:24.369Z,1516688724.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:24.385Z,1516688724.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:24.777Z,1516688724.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:24.811Z,1516688724.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:25.175Z,1516688725.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:25.193Z,1516688725.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:25.576Z,1516688725.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:25.590Z,1516688725.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:25.993Z,1516688725.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:26.017Z,1516688726.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:26.393Z,1516688726.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:26.423Z,1516688726.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:26.781Z,1516688726.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:26.825Z,1516688726.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:27.175Z,1516688727.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:27.194Z,1516688727.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:27.577Z,1516688727.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:27.592Z,1516688727.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:27.977Z,1516688727.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:27.997Z,1516688727.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:28.380Z,1516688728.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:28.401Z,1516688728.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:28.797Z,1516688728.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:28.837Z,1516688728.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:29.197Z,1516688729.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:29.216Z,1516688729.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:29.599Z,1516688729.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:29.618Z,1516688729.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:30.008Z,1516688730.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:30.057Z,1516688730.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:30.405Z,1516688730.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:30.451Z,1516688730.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:35.108Z,1516688735.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:35.154Z,1516688735.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:35.261Z,1516688735.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:35.287Z,1516688735.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:35.661Z,1516688735.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:35.685Z,1516688735.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:36.063Z,1516688736.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:36.085Z,1516688736.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:36.457Z,1516688736.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:36.477Z,1516688736.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:36.838Z,1516688736.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:36.881Z,1516688736.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:37.271Z,1516688737.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:37.331Z,1516688737.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:37.648Z,1516688737.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:37.684Z,1516688737.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:38.053Z,1516688738.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:38.097Z,1516688738.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:38.454Z,1516688738.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:38.498Z,1516688738.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:38.850Z,1516688738.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:38.901Z,1516688738.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:39.243Z,1516688739.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:39.257Z,1516688739.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:39.647Z,1516688739.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:39.674Z,1516688739.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:40.045Z,1516688740.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:40.065Z,1516688740.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:40.434Z,1516688740.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:40.507Z,1516688740.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:40.834Z,1516688740.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:40.877Z,1516688740.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:41.258Z,1516688741.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:41.276Z,1516688741.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:41.657Z,1516688741.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:41.707Z,1516688741.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:42.055Z,1516688742.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:42.077Z,1516688742.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:42.436Z,1516688742.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:42.470Z,1516688742.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:42.835Z,1516688742.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:42.896Z,1516688742.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:43.238Z,1516688743.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:43.245Z,1516688743.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x10224 got:0x10211 2018-01-23T06:25:43.277Z,1516688743.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:43.638Z,1516688743.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:43.682Z,1516688743.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:44.050Z,1516688744.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:44.127Z,1516688744.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:44.456Z,1516688744.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:44.486Z,1516688744.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:44.853Z,1516688744.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:44.885Z,1516688744.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:45.236Z,1516688745.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:45.250Z,1516688745.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:45.639Z,1516688745.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:45.653Z,1516688745.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:46.034Z,1516688746.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:46.078Z,1516688746.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:46.437Z,1516688746.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:46.453Z,1516688746.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:46.838Z,1516688746.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:46.852Z,1516688746.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:47.248Z,1516688747.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:47.262Z,1516688747.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:47.644Z,1516688747.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:47.680Z,1516688747.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:48.054Z,1516688748.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:48.061Z,1516688748.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x14588 got:0x25117 2018-01-23T06:25:48.093Z,1516688748.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:48.440Z,1516688748.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:48.454Z,1516688748.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:48.838Z,1516688748.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:48.864Z,1516688748.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:49.237Z,1516688749.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:49.282Z,1516688749.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:49.636Z,1516688749.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:49.655Z,1516688749.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:50.042Z,1516688750.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:50.057Z,1516688750.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:50.453Z,1516688750.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:50.483Z,1516688750.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:50.842Z,1516688750.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:50.883Z,1516688750.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:51.238Z,1516688751.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:51.255Z,1516688751.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:51.638Z,1516688751.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:51.654Z,1516688751.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:52.038Z,1516688752.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:52.060Z,1516688752.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:52.439Z,1516688752.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:52.467Z,1516688752.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:52.835Z,1516688752.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:52.865Z,1516688752.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:53.249Z,1516688753.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:53.269Z,1516688753.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:53.651Z,1516688753.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:53.665Z,1516688753.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:54.046Z,1516688754.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:54.086Z,1516688754.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:54.432Z,1516688754.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:54.461Z,1516688754.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:54.844Z,1516688754.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:54.859Z,1516688754.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:55.246Z,1516688755.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:55.260Z,1516688755.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:55.646Z,1516688755.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:55.685Z,1516688755.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:56.048Z,1516688756.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:56.066Z,1516688756.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:56.453Z,1516688756.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:56.468Z,1516688756.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:56.851Z,1516688756.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:56.866Z,1516688756.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:57.236Z,1516688757.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:57.261Z,1516688757.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:57.636Z,1516688757.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:57.658Z,1516688757.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:58.032Z,1516688758.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:58.055Z,1516688758.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:58.430Z,1516688758.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:58.448Z,1516688758.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:58.831Z,1516688758.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:58.845Z,1516688758.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:59.240Z,1516688759.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:59.256Z,1516688759.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:25:59.651Z,1516688759.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:25:59.666Z,1516688759.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:00.047Z,1516688760.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:00.061Z,1516688760.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:00.433Z,1516688760.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:00.465Z,1516688760.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:00.831Z,1516688760.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:00.845Z,1516688760.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:01.230Z,1516688761.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:01.245Z,1516688761.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:01.631Z,1516688761.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:01.650Z,1516688761.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:02.044Z,1516688762.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:02.058Z,1516688762.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:02.444Z,1516688762.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:02.458Z,1516688762.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:02.844Z,1516688762.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:02.862Z,1516688762.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:03.230Z,1516688763.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:03.272Z,1516688763.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:03.634Z,1516688763.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:03.653Z,1516688763.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:04.060Z,1516688764.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:04.078Z,1516688764.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:04.435Z,1516688764.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:04.449Z,1516688764.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:04.841Z,1516688764.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:04.875Z,1516688764.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:05.252Z,1516688765.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:05.284Z,1516688765.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:05.648Z,1516688765.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:05.676Z,1516688765.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:06.048Z,1516688766.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:06.075Z,1516688766.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:06.441Z,1516688766.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:06.476Z,1516688766.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:06.836Z,1516688766.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:06.870Z,1516688766.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:07.238Z,1516688767.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:07.253Z,1516688767.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:07.642Z,1516688767.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:07.656Z,1516688767.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:08.044Z,1516688768.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:08.062Z,1516688768.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:08.444Z,1516688768.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:08.458Z,1516688768.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:08.848Z,1516688768.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:08.882Z,1516688768.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:09.233Z,1516688769.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:09.260Z,1516688769.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:09.629Z,1516688769.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:09.666Z,1516688769.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:10.033Z,1516688770.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:10.064Z,1516688770.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:10.430Z,1516688770.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:10.467Z,1516688770.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:10.830Z,1516688770.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:10.857Z,1516688770.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:11.257Z,1516688771.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:11.278Z,1516688771.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:11.644Z,1516688771.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:11.681Z,1516688771.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:12.041Z,1516688772.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:12.078Z,1516688772.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:12.434Z,1516688772.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:12.477Z,1516688772.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:12.830Z,1516688772.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:12.877Z,1516688772.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:13.235Z,1516688773.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:13.250Z,1516688773.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:13.634Z,1516688773.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:13.650Z,1516688773.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:14.049Z,1516688774.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:14.089Z,1516688774.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:14.449Z,1516688774.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:14.484Z,1516688774.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:14.844Z,1516688774.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:14.881Z,1516688774.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:15.238Z,1516688775.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:15.253Z,1516688775.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:15.632Z,1516688775.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:15.661Z,1516688775.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:16.040Z,1516688776.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:16.054Z,1516688776.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:16.439Z,1516688776.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:16.453Z,1516688776.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:16.837Z,1516688776.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:16.851Z,1516688776.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:17.242Z,1516688777.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:17.257Z,1516688777.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:17.644Z,1516688777.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:17.666Z,1516688777.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:18.042Z,1516688778.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:18.057Z,1516688778.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:18.437Z,1516688778.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:18.451Z,1516688778.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:18.838Z,1516688778.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:18.852Z,1516688778.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:19.236Z,1516688779.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:19.255Z,1516688779.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:19.637Z,1516688779.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:19.651Z,1516688779.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:20.043Z,1516688780.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:20.057Z,1516688780.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:20.444Z,1516688780.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:20.458Z,1516688780.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:20.842Z,1516688780.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:20.870Z,1516688780.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:21.242Z,1516688781.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:21.256Z,1516688781.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:21.631Z,1516688781.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:21.658Z,1516688781.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:22.040Z,1516688782.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:22.059Z,1516688782.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:22.430Z,1516688782.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:22.469Z,1516688782.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:22.829Z,1516688782.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:22.861Z,1516688782.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:23.248Z,1516688783.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:23.263Z,1516688783.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:23.653Z,1516688783.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:23.672Z,1516688783.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:24.049Z,1516688784.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:24.063Z,1516688784.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:24.439Z,1516688784.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:24.457Z,1516688784.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:24.829Z,1516688784.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:24.874Z,1516688784.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:25.243Z,1516688785.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:25.257Z,1516688785.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:25.629Z,1516688785.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:25.669Z,1516688785.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:26.054Z,1516688786.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:26.068Z,1516688786.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:26.444Z,1516688786.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:26.479Z,1516688786.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:26.848Z,1516688786.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:26.863Z,1516688786.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:27.231Z,1516688787.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:27.266Z,1516688787.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:27.630Z,1516688787.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:27.665Z,1516688787.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:28.044Z,1516688788.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:28.069Z,1516688788.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:28.454Z,1516688788.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:28.468Z,1516688788.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:28.844Z,1516688788.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:28.867Z,1516688788.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:29.230Z,1516688789.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:29.262Z,1516688789.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:29.629Z,1516688789.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:29.667Z,1516688789.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:30.049Z,1516688790.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:30.064Z,1516688790.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:30.448Z,1516688790.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:30.480Z,1516688790.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:33.554Z,1516688793.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:33.568Z,1516688793.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:33.666Z,1516688793.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:33.710Z,1516688793.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:34.014Z,1516688794.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:34.038Z,1516688794.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:34.423Z,1516688794.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:34.459Z,1516688794.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:34.814Z,1516688794.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:34.829Z,1516688794.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:35.224Z,1516688795.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:35.255Z,1516688795.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:35.628Z,1516688795.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:35.654Z,1516688795.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:36.028Z,1516688796.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:36.042Z,1516688796.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:36.416Z,1516688796.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:36.430Z,1516688796.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:36.817Z,1516688796.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:36.831Z,1516688796.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:37.216Z,1516688797.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:37.231Z,1516688797.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:37.615Z,1516688797.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:37.633Z,1516688797.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:38.020Z,1516688798.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:38.034Z,1516688798.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:38.420Z,1516688798.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:38.434Z,1516688798.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:38.820Z,1516688798.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:38.834Z,1516688798.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:39.218Z,1516688799.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:39.236Z,1516688799.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:39.614Z,1516688799.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:39.628Z,1516688799.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:40.020Z,1516688800.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:40.035Z,1516688800.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:40.424Z,1516688800.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:40.438Z,1516688800.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:40.820Z,1516688800.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:40.835Z,1516688800.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:41.214Z,1516688801.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:41.242Z,1516688801.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:41.618Z,1516688801.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:41.632Z,1516688801.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:42.020Z,1516688802.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:42.035Z,1516688802.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:42.424Z,1516688802.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:42.438Z,1516688802.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:42.820Z,1516688802.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:42.840Z,1516688802.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:43.219Z,1516688803.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:43.233Z,1516688803.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:43.616Z,1516688803.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:43.631Z,1516688803.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:44.020Z,1516688804.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:44.034Z,1516688804.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:44.420Z,1516688804.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:44.435Z,1516688804.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:44.820Z,1516688804.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:44.834Z,1516688804.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:45.218Z,1516688805.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:45.232Z,1516688805.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:45.614Z,1516688805.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:45.636Z,1516688805.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:46.020Z,1516688806.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:46.034Z,1516688806.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:46.424Z,1516688806.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:46.458Z,1516688806.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:46.820Z,1516688806.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:46.850Z,1516688806.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:47.215Z,1516688807.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:47.253Z,1516688807.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:47.617Z,1516688807.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:47.631Z,1516688807.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:48.020Z,1516688808.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:48.035Z,1516688808.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:48.427Z,1516688808.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:48.458Z,1516688808.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:48.832Z,1516688808.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:48.855Z,1516688808.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:49.213Z,1516688809.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:49.234Z,1516688809.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:49.616Z,1516688809.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:49.638Z,1516688809.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:50.018Z,1516688810.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:50.032Z,1516688810.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:50.421Z,1516688810.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:50.436Z,1516688810.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:50.825Z,1516688810.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:50.864Z,1516688810.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:51.220Z,1516688811.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:51.237Z,1516688811.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:51.614Z,1516688811.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:51.629Z,1516688811.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:52.016Z,1516688812.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:52.031Z,1516688812.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:52.419Z,1516688812.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:52.434Z,1516688812.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:52.815Z,1516688812.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:52.830Z,1516688812.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:53.222Z,1516688813.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:53.241Z,1516688813.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:53.623Z,1516688813.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:53.637Z,1516688813.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:54.022Z,1516688814.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:54.041Z,1516688814.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:54.417Z,1516688814.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:54.437Z,1516688814.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:54.818Z,1516688814.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:54.832Z,1516688814.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:55.214Z,1516688815.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:55.240Z,1516688815.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:55.610Z,1516688815.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:55.641Z,1516688815.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:56.022Z,1516688816.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:56.036Z,1516688816.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:56.425Z,1516688816.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:56.451Z,1516688816.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:56.832Z,1516688816.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:56.846Z,1516688816.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:57.229Z,1516688817.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:57.248Z,1516688817.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:57.607Z,1516688817.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:57.629Z,1516688817.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:58.013Z,1516688818.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:58.044Z,1516688818.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:58.410Z,1516688818.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:58.446Z,1516688818.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:58.809Z,1516688818.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:58.844Z,1516688818.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:59.220Z,1516688819.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:59.254Z,1516688819.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:26:59.636Z,1516688819.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:26:59.651Z,1516688819.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:00.020Z,1516688820.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:00.053Z,1516688820.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:00.409Z,1516688820.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:00.445Z,1516688820.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:00.810Z,1516688820.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:00.846Z,1516688820.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:01.208Z,1516688821.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:01.222Z,1516688821.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:01.611Z,1516688821.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:01.625Z,1516688821.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:02.010Z,1516688822.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:02.024Z,1516688822.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:02.428Z,1516688822.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:02.450Z,1516688822.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:02.832Z,1516688822.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:02.861Z,1516688822.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:03.233Z,1516688823.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:03.258Z,1516688823.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:03.610Z,1516688823.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:03.626Z,1516688823.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:04.021Z,1516688824.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:04.053Z,1516688824.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:04.418Z,1516688824.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:04.432Z,1516688824.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:04.818Z,1516688824.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:04.833Z,1516688824.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:05.232Z,1516688825.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:05.261Z,1516688825.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:05.628Z,1516688825.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:05.655Z,1516688825.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:06.020Z,1516688826.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:06.035Z,1516688826.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:06.416Z,1516688826.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:06.430Z,1516688826.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:06.816Z,1516688826.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:06.830Z,1516688826.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:07.212Z,1516688827.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:07.239Z,1516688827.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:07.616Z,1516688827.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:07.634Z,1516688827.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:08.018Z,1516688828.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:08.032Z,1516688828.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:08.422Z,1516688828.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:08.441Z,1516688828.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:08.824Z,1516688828.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:08.838Z,1516688828.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:09.223Z,1516688829.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:09.237Z,1516688829.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:09.612Z,1516688829.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:09.632Z,1516688829.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:10.020Z,1516688830.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:10.034Z,1516688830.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:10.416Z,1516688830.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:10.442Z,1516688830.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:10.812Z,1516688830.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:10.834Z,1516688830.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:11.224Z,1516688831.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:11.243Z,1516688831.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:11.632Z,1516688831.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:11.652Z,1516688831.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:12.027Z,1516688832.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:12.041Z,1516688832.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:12.417Z,1516688832.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:12.437Z,1516688832.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:12.814Z,1516688832.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:12.836Z,1516688832.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:13.207Z,1516688833.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:13.241Z,1516688833.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:13.610Z,1516688833.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:13.635Z,1516688833.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:14.009Z,1516688834.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:14.046Z,1516688834.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:14.424Z,1516688834.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:14.451Z,1516688834.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:14.832Z,1516688834.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:14.846Z,1516688834.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:15.224Z,1516688835.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:15.247Z,1516688835.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:15.607Z,1516688835.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:15.633Z,1516688835.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:16.009Z,1516688836.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:16.040Z,1516688836.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:16.410Z,1516688836.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:16.444Z,1516688836.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:16.809Z,1516688836.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:16.845Z,1516688836.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:17.224Z,1516688837.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:17.249Z,1516688837.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:17.651Z,1516688837.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:18.046Z,1516688838.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:18.453Z,1516688838.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:18.837Z,1516688838.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:19.233Z,1516688839.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:19.631Z,1516688839.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:20.033Z,1516688840.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:20.438Z,1516688840.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:20.842Z,1516688840.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:21.234Z,1516688841.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:21.630Z,1516688841.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:22.037Z,1516688842.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:22.434Z,1516688842.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:22.837Z,1516688842.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:23.234Z,1516688843.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:23.638Z,1516688843.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:23.638Z,1516688843.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-01-23T06:27:23.638Z,1516688843.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:27:23.641Z,1516688843.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:23.641Z,1516688843.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-01-23T06:27:23.641Z,1516688843.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:27:23.643Z,1516688843.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:23.643Z,1516688843.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64 2018-01-23T06:27:23.643Z,1516688843.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:27:23.671Z,1516688843.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:27:23.671Z,1516688843.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:27:23.672Z,1516688843.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:27:24.057Z,1516688844.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:27:24.057Z,1516688844.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-01-23T06:27:24.058Z,1516688844.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:27:24.058Z,1516688844.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-01-23T06:27:24.058Z,1516688844.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:27:24.058Z,1516688844.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64 2018-01-23T06:27:24.432Z,1516688844.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:27:24.433Z,1516688844.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:27:24.433Z,1516688844.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:27:24.433Z,1516688844.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:27:24.434Z,1516688844.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:27:24.434Z,1516688844.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:27:24.435Z,1516688844.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:27:24.435Z,1516688844.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:27:24.435Z,1516688844.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:27:24.834Z,1516688844.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:27:24.839Z,1516688844.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:25.239Z,1516688845.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:27:25.240Z,1516688845.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:25.641Z,1516688845.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:27:25.642Z,1516688845.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:26.041Z,1516688846.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:27:26.042Z,1516688846.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:26.442Z,1516688846.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:27:26.447Z,1516688846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:26.868Z,1516688846.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:27:26.869Z,1516688846.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:27.247Z,1516688847.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:27:27.248Z,1516688847.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:27.639Z,1516688847.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:27:27.640Z,1516688847.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:28.044Z,1516688848.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:27:28.045Z,1516688848.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:28.425Z,1516688848.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:27:28.426Z,1516688848.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:28.825Z,1516688848.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:27:28.826Z,1516688848.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:29.260Z,1516688849.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:27:29.261Z,1516688849.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:29.652Z,1516688849.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:27:29.653Z,1516688849.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:30.043Z,1516688850.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:27:30.044Z,1516688850.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:30.429Z,1516688850.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:27:30.430Z,1516688850.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:30.831Z,1516688850.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:27:30.832Z,1516688850.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:33.926Z,1516688853.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T06:27:33.927Z,1516688853.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:34.072Z,1516688854.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:27:34.073Z,1516688854.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:34.413Z,1516688854.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:27:34.414Z,1516688854.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:34.817Z,1516688854.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:27:34.818Z,1516688854.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:35.214Z,1516688855.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:27:35.223Z,1516688855.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:35.589Z,1516688855.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:27:35.590Z,1516688855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:35.975Z,1516688855.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:35.988Z,1516688855.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:27:35.989Z,1516688855.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:36.377Z,1516688856.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:36.396Z,1516688856.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:27:36.397Z,1516688856.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:36.774Z,1516688856.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:36.797Z,1516688856.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:27:36.797Z,1516688856.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:37.189Z,1516688857.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:37.202Z,1516688857.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:27:37.203Z,1516688857.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:37.585Z,1516688857.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:37.607Z,1516688857.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:27:37.608Z,1516688857.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:37.991Z,1516688857.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:38.005Z,1516688858.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:27:38.006Z,1516688858.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:38.376Z,1516688858.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:38.406Z,1516688858.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:27:38.407Z,1516688858.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:38.785Z,1516688858.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:38.799Z,1516688858.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:27:38.800Z,1516688858.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:39.172Z,1516688859.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:39.203Z,1516688859.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:27:39.204Z,1516688859.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:39.574Z,1516688859.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:39.601Z,1516688859.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:27:39.602Z,1516688859.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:39.973Z,1516688859.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:39.999Z,1516688859.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:27:40.000Z,1516688860.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:40.387Z,1516688860.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:40.406Z,1516688860.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:27:40.407Z,1516688860.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:40.793Z,1516688860.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:40.807Z,1516688860.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:27:40.808Z,1516688860.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:41.188Z,1516688861.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:41.202Z,1516688861.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:27:41.203Z,1516688861.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:41.606Z,1516688861.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:27:41.644Z,1516688861.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:27:41.645Z,1516688861.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:42.004Z,1516688862.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:27:42.005Z,1516688862.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:42.397Z,1516688862.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:27:42.398Z,1516688862.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:42.800Z,1516688862.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:27:42.801Z,1516688862.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:43.206Z,1516688863.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:27:43.207Z,1516688863.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:43.606Z,1516688863.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:27:43.607Z,1516688863.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:44.004Z,1516688864.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:44.405Z,1516688864.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:44.803Z,1516688864.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:45.203Z,1516688865.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:45.606Z,1516688865.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:46.003Z,1516688866.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:46.411Z,1516688866.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:46.808Z,1516688866.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:47.211Z,1516688867.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:47.603Z,1516688867.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:48.007Z,1516688868.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:48.384Z,1516688868.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:48.787Z,1516688868.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:49.217Z,1516688869.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:49.614Z,1516688869.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:50.018Z,1516688870.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:50.401Z,1516688870.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:50.793Z,1516688870.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:51.197Z,1516688871.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:51.597Z,1516688871.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:51.991Z,1516688871.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:52.400Z,1516688872.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:52.802Z,1516688872.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:53.201Z,1516688873.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:53.603Z,1516688873.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:53.995Z,1516688873.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:54.390Z,1516688874.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:54.793Z,1516688874.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:55.202Z,1516688875.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:55.605Z,1516688875.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:56.001Z,1516688876.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:56.396Z,1516688876.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:56.802Z,1516688876.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:57.201Z,1516688877.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:57.606Z,1516688877.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:58.001Z,1516688878.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:58.400Z,1516688878.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:58.796Z,1516688878.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:59.202Z,1516688879.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:27:59.605Z,1516688879.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:00.003Z,1516688880.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:00.394Z,1516688880.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:00.805Z,1516688880.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:01.213Z,1516688881.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:01.607Z,1516688881.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:02.005Z,1516688882.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:02.401Z,1516688882.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:02.800Z,1516688882.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:03.206Z,1516688883.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:03.614Z,1516688883.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:04.009Z,1516688884.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:04.408Z,1516688884.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:04.805Z,1516688884.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:05.217Z,1516688885.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:05.610Z,1516688885.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:06.020Z,1516688886.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:06.393Z,1516688886.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:06.793Z,1516688886.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:07.222Z,1516688887.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:07.606Z,1516688887.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:07.998Z,1516688887.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:08.396Z,1516688888.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:08.797Z,1516688888.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:09.201Z,1516688889.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:09.602Z,1516688889.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:09.998Z,1516688889.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:10.392Z,1516688890.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:10.801Z,1516688890.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:11.200Z,1516688891.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:11.605Z,1516688891.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:12.001Z,1516688892.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:12.394Z,1516688892.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:12.794Z,1516688892.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:13.206Z,1516688893.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:13.605Z,1516688893.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:14.005Z,1516688894.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:14.398Z,1516688894.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:14.797Z,1516688894.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:15.211Z,1516688895.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:15.607Z,1516688895.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:16.009Z,1516688896.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:16.395Z,1516688896.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:16.804Z,1516688896.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:17.206Z,1516688897.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:17.613Z,1516688897.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:18.010Z,1516688898.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:18.397Z,1516688898.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:18.800Z,1516688898.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:19.205Z,1516688899.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:19.606Z,1516688899.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:20.005Z,1516688900.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:20.401Z,1516688900.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:20.805Z,1516688900.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:21.206Z,1516688901.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:21.615Z,1516688901.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:22.003Z,1516688902.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:22.399Z,1516688902.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:22.802Z,1516688902.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:23.202Z,1516688903.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:23.609Z,1516688903.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:24.013Z,1516688904.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:24.399Z,1516688904.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:24.799Z,1516688904.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:25.209Z,1516688905.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:25.605Z,1516688905.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:26.003Z,1516688906.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:26.403Z,1516688906.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:26.801Z,1516688906.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:27.209Z,1516688907.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:27.615Z,1516688907.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:28.006Z,1516688908.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:28.393Z,1516688908.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:28.803Z,1516688908.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:29.205Z,1516688909.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:29.208Z,1516688909.208 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:23:28.8Z 2018-01-23T06:28:29.208Z,1516688909.208 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:28:29.208Z,1516688909.208 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:28:29.608Z,1516688909.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:30.118Z,1516688910.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:30.406Z,1516688910.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:33.482Z,1516688913.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:33.563Z,1516688913.563 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0076.lzma 2018-01-23T06:28:33.613Z,1516688913.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:34.005Z,1516688914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:34.340Z,1516688914.340 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0076.lzma.bak 2018-01-23T06:28:34.340Z,1516688914.340 [DataOverHttps](INFO): SBD MOMSN=7755135 2018-01-23T06:28:34.409Z,1516688914.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:35.021Z,1516688915.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:35.176Z,1516688915.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:38.317Z,1516688918.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:38.456Z,1516688918.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:38.804Z,1516688918.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:39.220Z,1516688919.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:39.597Z,1516688919.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:40.001Z,1516688920.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:43.102Z,1516688923.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:43.176Z,1516688923.176 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0077.lzma 2018-01-23T06:28:43.223Z,1516688923.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:43.581Z,1516688923.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:43.933Z,1516688923.933 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0077.lzma.bak 2018-01-23T06:28:43.933Z,1516688923.933 [DataOverHttps](INFO): SBD MOMSN=7755137 2018-01-23T06:28:44.003Z,1516688924.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:44.617Z,1516688924.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:44.620Z,1516688924.620 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:28:44.620Z,1516688924.620 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:28:44.620Z,1516688924.620 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:28:44.776Z,1516688924.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:47.870Z,1516688927.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:47.981Z,1516688927.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:48.363Z,1516688928.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:48.765Z,1516688928.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:49.142Z,1516688929.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:49.538Z,1516688929.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:49.938Z,1516688929.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:50.361Z,1516688930.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:50.738Z,1516688930.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:51.140Z,1516688931.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:51.545Z,1516688931.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:51.968Z,1516688931.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:52.334Z,1516688932.334 [PNI_TCM](ERROR): CRC does not match. Expected:0x35766 got:0x6466 2018-01-23T06:28:52.366Z,1516688932.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:52.736Z,1516688932.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:53.138Z,1516688933.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:53.550Z,1516688933.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:53.938Z,1516688933.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:54.350Z,1516688934.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:54.751Z,1516688934.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:55.175Z,1516688935.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:55.549Z,1516688935.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:55.938Z,1516688935.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:56.338Z,1516688936.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:56.757Z,1516688936.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:57.138Z,1516688937.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:57.553Z,1516688937.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:57.952Z,1516688937.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:58.376Z,1516688938.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:58.748Z,1516688938.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:59.143Z,1516688939.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:59.548Z,1516688939.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:28:59.958Z,1516688939.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:00.353Z,1516688940.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:00.756Z,1516688940.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:01.149Z,1516688941.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:01.561Z,1516688941.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:01.943Z,1516688941.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:02.425Z,1516688942.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:02.742Z,1516688942.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:03.166Z,1516688943.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:03.548Z,1516688943.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:03.949Z,1516688943.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:04.349Z,1516688944.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:04.749Z,1516688944.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:05.153Z,1516688945.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:05.545Z,1516688945.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:05.949Z,1516688945.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:06.349Z,1516688946.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:06.753Z,1516688946.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:07.149Z,1516688947.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:07.540Z,1516688947.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:07.938Z,1516688947.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:08.346Z,1516688948.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:08.738Z,1516688948.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:09.149Z,1516688949.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:09.549Z,1516688949.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:09.950Z,1516688949.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:10.354Z,1516688950.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:10.750Z,1516688950.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:11.145Z,1516688951.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:11.545Z,1516688951.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:11.941Z,1516688951.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:12.351Z,1516688952.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:12.751Z,1516688952.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:13.146Z,1516688953.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:13.541Z,1516688953.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:13.941Z,1516688953.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:14.345Z,1516688954.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:14.744Z,1516688954.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:15.152Z,1516688955.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:15.551Z,1516688955.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:15.965Z,1516688955.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:16.352Z,1516688956.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:16.745Z,1516688956.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:17.155Z,1516688957.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:17.545Z,1516688957.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:17.949Z,1516688957.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:18.364Z,1516688958.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:18.765Z,1516688958.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:19.154Z,1516688959.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:19.530Z,1516688959.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:19.932Z,1516688959.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:20.361Z,1516688960.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:20.741Z,1516688960.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:21.135Z,1516688961.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:21.538Z,1516688961.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:21.942Z,1516688961.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:22.341Z,1516688962.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:22.736Z,1516688962.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:23.135Z,1516688963.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:23.537Z,1516688963.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:23.941Z,1516688963.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:24.341Z,1516688964.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:24.742Z,1516688964.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:25.149Z,1516688965.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:25.540Z,1516688965.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:25.936Z,1516688965.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:26.336Z,1516688966.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:26.738Z,1516688966.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:27.136Z,1516688967.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:27.545Z,1516688967.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:27.942Z,1516688967.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:28.341Z,1516688968.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:28.735Z,1516688968.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:29.135Z,1516688969.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:29.536Z,1516688969.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:29.938Z,1516688969.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:30.349Z,1516688970.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:30.752Z,1516688970.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:31.145Z,1516688971.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:31.546Z,1516688971.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:31.936Z,1516688971.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:32.346Z,1516688972.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:32.753Z,1516688972.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:33.146Z,1516688973.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:33.540Z,1516688973.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:33.934Z,1516688973.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:34.346Z,1516688974.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:34.753Z,1516688974.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:35.145Z,1516688975.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:35.537Z,1516688975.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:35.945Z,1516688975.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:36.345Z,1516688976.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:36.757Z,1516688976.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:37.153Z,1516688977.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:37.538Z,1516688977.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:37.940Z,1516688977.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:38.349Z,1516688978.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:38.753Z,1516688978.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:39.156Z,1516688979.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:39.540Z,1516688979.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:39.946Z,1516688979.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:40.346Z,1516688980.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:40.753Z,1516688980.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:41.153Z,1516688981.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:41.536Z,1516688981.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:41.937Z,1516688981.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:42.347Z,1516688982.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:42.756Z,1516688982.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:43.153Z,1516688983.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:43.540Z,1516688983.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:43.938Z,1516688983.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:44.347Z,1516688984.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:44.751Z,1516688984.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:45.146Z,1516688985.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:48.242Z,1516688988.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:48.385Z,1516688988.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:48.714Z,1516688988.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:49.138Z,1516688989.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:49.522Z,1516688989.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:49.912Z,1516688989.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:50.311Z,1516688990.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:50.710Z,1516688990.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:51.114Z,1516688991.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:51.526Z,1516688991.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:51.918Z,1516688991.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:52.318Z,1516688992.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:52.720Z,1516688992.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:53.114Z,1516688993.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:53.517Z,1516688993.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:53.916Z,1516688993.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:54.316Z,1516688994.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:54.730Z,1516688994.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:55.124Z,1516688995.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:55.523Z,1516688995.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:55.921Z,1516688995.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:56.311Z,1516688996.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:56.709Z,1516688996.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:57.117Z,1516688997.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:57.520Z,1516688997.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:57.924Z,1516688997.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:58.321Z,1516688998.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:58.721Z,1516688998.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:59.115Z,1516688999.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:59.516Z,1516688999.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:29:59.921Z,1516688999.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:00.316Z,1516689000.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:00.726Z,1516689000.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:01.123Z,1516689001.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:01.523Z,1516689001.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:01.916Z,1516689001.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:02.326Z,1516689002.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:02.715Z,1516689002.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:03.118Z,1516689003.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:03.522Z,1516689003.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:03.923Z,1516689003.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:04.328Z,1516689004.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:04.720Z,1516689004.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:05.120Z,1516689005.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:05.519Z,1516689005.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:05.920Z,1516689005.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:06.319Z,1516689006.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:06.727Z,1516689006.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:07.123Z,1516689007.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:07.525Z,1516689007.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:07.919Z,1516689007.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:08.303Z,1516689008.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:08.709Z,1516689008.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:09.107Z,1516689009.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:09.507Z,1516689009.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:09.536Z,1516689009.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:09.908Z,1516689009.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:09.931Z,1516689009.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:10.308Z,1516689010.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:10.332Z,1516689010.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:10.711Z,1516689010.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:11.109Z,1516689011.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:11.507Z,1516689011.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:11.891Z,1516689011.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:11.916Z,1516689011.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:12.288Z,1516689012.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:12.311Z,1516689012.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:12.703Z,1516689012.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:12.717Z,1516689012.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:13.107Z,1516689013.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:13.128Z,1516689013.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:13.507Z,1516689013.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:13.521Z,1516689013.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:13.888Z,1516689013.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:13.910Z,1516689013.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:14.294Z,1516689014.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:14.308Z,1516689014.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:14.692Z,1516689014.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:14.712Z,1516689014.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:15.088Z,1516689015.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:15.119Z,1516689015.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:15.505Z,1516689015.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:15.519Z,1516689015.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:15.907Z,1516689015.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:15.921Z,1516689015.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:16.303Z,1516689016.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:16.317Z,1516689016.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:16.695Z,1516689016.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:16.717Z,1516689016.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:17.097Z,1516689017.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:17.117Z,1516689017.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:17.488Z,1516689017.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:17.510Z,1516689017.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:17.895Z,1516689017.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:17.916Z,1516689017.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:18.297Z,1516689018.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:18.317Z,1516689018.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:18.703Z,1516689018.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:18.718Z,1516689018.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:19.108Z,1516689019.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:19.122Z,1516689019.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:19.507Z,1516689019.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:19.529Z,1516689019.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:19.888Z,1516689019.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:19.910Z,1516689019.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:20.292Z,1516689020.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:20.322Z,1516689020.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:20.692Z,1516689020.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:20.711Z,1516689020.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:21.088Z,1516689021.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:21.110Z,1516689021.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:21.505Z,1516689021.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:21.519Z,1516689021.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:21.907Z,1516689021.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:21.921Z,1516689021.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:22.304Z,1516689022.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:22.318Z,1516689022.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:22.695Z,1516689022.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:22.716Z,1516689022.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:23.097Z,1516689023.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:23.111Z,1516689023.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:23.488Z,1516689023.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:23.510Z,1516689023.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:23.894Z,1516689023.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:23.912Z,1516689023.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:24.288Z,1516689024.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:24.310Z,1516689024.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:24.704Z,1516689024.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:24.718Z,1516689024.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:24.718Z,1516689024.718 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-01-23T06:30:24.718Z,1516689024.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:30:24.720Z,1516689024.720 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:24.720Z,1516689024.720 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-01-23T06:30:24.720Z,1516689024.720 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:30:24.722Z,1516689024.722 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:24.722Z,1516689024.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65 2018-01-23T06:30:24.722Z,1516689024.722 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:30:24.734Z,1516689024.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:30:24.751Z,1516689024.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:30:24.751Z,1516689024.751 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:30:25.108Z,1516689025.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:25.138Z,1516689025.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:30:25.139Z,1516689025.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-01-23T06:30:25.139Z,1516689025.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:30:25.139Z,1516689025.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-01-23T06:30:25.140Z,1516689025.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:30:25.140Z,1516689025.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65 2018-01-23T06:30:25.500Z,1516689025.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:25.520Z,1516689025.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:30:25.521Z,1516689025.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:30:25.521Z,1516689025.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:30:25.521Z,1516689025.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:30:25.522Z,1516689025.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:30:25.522Z,1516689025.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:30:25.523Z,1516689025.523 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:30:25.523Z,1516689025.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:30:25.523Z,1516689025.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:30:25.889Z,1516689025.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:25.920Z,1516689025.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:30:25.921Z,1516689025.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:26.285Z,1516689026.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:26.321Z,1516689026.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:30:26.322Z,1516689026.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:26.690Z,1516689026.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:26.720Z,1516689026.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:30:26.721Z,1516689026.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:27.085Z,1516689027.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:27.120Z,1516689027.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:30:27.121Z,1516689027.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:27.496Z,1516689027.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:27.530Z,1516689027.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:30:27.531Z,1516689027.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:27.908Z,1516689027.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:27.922Z,1516689027.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:30:27.923Z,1516689027.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:28.296Z,1516689028.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:28.328Z,1516689028.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:30:28.329Z,1516689028.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:28.685Z,1516689028.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:28.721Z,1516689028.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:30:28.722Z,1516689028.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:29.089Z,1516689029.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:29.120Z,1516689029.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:30:29.121Z,1516689029.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:29.485Z,1516689029.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:30:29.520Z,1516689029.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:30:29.521Z,1516689029.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:29.948Z,1516689029.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:30:29.948Z,1516689029.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:30.330Z,1516689030.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:30:30.331Z,1516689030.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:30.738Z,1516689030.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:30:30.739Z,1516689030.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:31.148Z,1516689031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:30:31.149Z,1516689031.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:31.552Z,1516689031.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:30:31.553Z,1516689031.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:31.937Z,1516689031.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:30:31.938Z,1516689031.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:32.343Z,1516689032.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:30:32.344Z,1516689032.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:32.730Z,1516689032.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:30:32.735Z,1516689032.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:33.123Z,1516689033.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:30:33.124Z,1516689033.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:33.540Z,1516689033.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:30:33.541Z,1516689033.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:33.945Z,1516689033.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:30:33.946Z,1516689033.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:34.325Z,1516689034.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:30:34.326Z,1516689034.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:34.749Z,1516689034.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:30:34.750Z,1516689034.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:35.118Z,1516689035.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:30:35.124Z,1516689035.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:35.533Z,1516689035.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:30:35.534Z,1516689035.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:35.944Z,1516689035.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:30:35.945Z,1516689035.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:36.329Z,1516689036.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:30:36.330Z,1516689036.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:36.741Z,1516689036.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:30:36.742Z,1516689036.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:37.137Z,1516689037.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:30:37.138Z,1516689037.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:37.545Z,1516689037.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:30:37.546Z,1516689037.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:37.918Z,1516689037.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:30:37.939Z,1516689037.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:38.324Z,1516689038.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:30:38.325Z,1516689038.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:38.725Z,1516689038.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:30:38.726Z,1516689038.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:39.115Z,1516689039.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:30:39.116Z,1516689039.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:39.537Z,1516689039.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:30:39.538Z,1516689039.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:39.930Z,1516689039.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:30:39.931Z,1516689039.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:40.331Z,1516689040.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:30:40.332Z,1516689040.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:40.712Z,1516689040.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:30:40.713Z,1516689040.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:41.101Z,1516689041.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:30:41.101Z,1516689041.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:41.536Z,1516689041.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:30:41.537Z,1516689041.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:41.907Z,1516689041.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:30:41.908Z,1516689041.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:42.304Z,1516689042.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:30:42.305Z,1516689042.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:42.714Z,1516689042.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:30:42.715Z,1516689042.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:43.113Z,1516689043.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:30:43.114Z,1516689043.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:43.510Z,1516689043.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:30:43.511Z,1516689043.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:43.906Z,1516689043.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:30:43.907Z,1516689043.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:44.307Z,1516689044.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:30:44.308Z,1516689044.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:44.706Z,1516689044.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:30:44.707Z,1516689044.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:45.106Z,1516689045.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:45.516Z,1516689045.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:48.611Z,1516689048.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:48.765Z,1516689048.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:49.099Z,1516689049.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:49.508Z,1516689049.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:49.898Z,1516689049.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:50.303Z,1516689050.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:50.704Z,1516689050.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:51.107Z,1516689051.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:51.502Z,1516689051.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:51.901Z,1516689051.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:52.300Z,1516689052.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:52.700Z,1516689052.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:53.106Z,1516689053.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:53.506Z,1516689053.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:53.913Z,1516689053.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:54.305Z,1516689054.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:54.703Z,1516689054.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:55.103Z,1516689055.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:55.505Z,1516689055.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:55.903Z,1516689055.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:56.303Z,1516689056.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:56.715Z,1516689056.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:57.108Z,1516689057.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:57.502Z,1516689057.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:57.884Z,1516689057.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:58.289Z,1516689058.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:58.685Z,1516689058.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:59.088Z,1516689059.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:59.498Z,1516689059.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:30:59.898Z,1516689059.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:00.297Z,1516689060.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:00.685Z,1516689060.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:01.108Z,1516689061.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:01.484Z,1516689061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:01.885Z,1516689061.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:02.293Z,1516689062.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:02.698Z,1516689062.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:03.113Z,1516689063.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:03.509Z,1516689063.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:03.901Z,1516689063.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:04.301Z,1516689064.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:04.692Z,1516689064.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:05.099Z,1516689065.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:05.507Z,1516689065.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:05.915Z,1516689065.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:06.310Z,1516689066.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:06.684Z,1516689066.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:07.109Z,1516689067.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:07.488Z,1516689067.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:07.897Z,1516689067.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:08.293Z,1516689068.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:08.725Z,1516689068.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:09.101Z,1516689069.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:09.506Z,1516689069.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:09.896Z,1516689069.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:10.291Z,1516689070.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:10.694Z,1516689070.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:11.092Z,1516689071.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:11.502Z,1516689071.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:11.898Z,1516689071.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:12.297Z,1516689072.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:12.701Z,1516689072.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:13.091Z,1516689073.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:13.497Z,1516689073.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:13.898Z,1516689073.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:14.310Z,1516689074.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:14.693Z,1516689074.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:15.090Z,1516689075.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:15.501Z,1516689075.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:15.893Z,1516689075.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:16.293Z,1516689076.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:16.701Z,1516689076.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:17.101Z,1516689077.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:17.509Z,1516689077.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:17.897Z,1516689077.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:18.292Z,1516689078.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:18.693Z,1516689078.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:19.097Z,1516689079.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:19.509Z,1516689079.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:19.901Z,1516689079.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:20.301Z,1516689080.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:20.692Z,1516689080.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:21.092Z,1516689081.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:21.501Z,1516689081.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:21.901Z,1516689081.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:22.306Z,1516689082.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:22.694Z,1516689082.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:23.092Z,1516689083.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:23.501Z,1516689083.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:23.909Z,1516689083.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:24.305Z,1516689084.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:24.696Z,1516689084.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:25.093Z,1516689085.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:25.503Z,1516689085.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:25.905Z,1516689085.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:26.309Z,1516689086.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:26.696Z,1516689086.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:27.136Z,1516689087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:27.510Z,1516689087.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:27.916Z,1516689087.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:28.303Z,1516689088.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:28.709Z,1516689088.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:29.115Z,1516689089.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:29.510Z,1516689089.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:29.917Z,1516689089.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:30.321Z,1516689090.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:30.692Z,1516689090.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:31.093Z,1516689091.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:31.524Z,1516689091.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:31.922Z,1516689091.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:32.298Z,1516689092.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:32.696Z,1516689092.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:33.089Z,1516689093.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:33.494Z,1516689093.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:33.897Z,1516689093.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:34.294Z,1516689094.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:34.690Z,1516689094.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:35.090Z,1516689095.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:35.494Z,1516689095.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:35.897Z,1516689095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:36.325Z,1516689096.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:36.693Z,1516689096.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:37.092Z,1516689097.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:37.519Z,1516689097.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:37.921Z,1516689097.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:38.294Z,1516689098.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:38.691Z,1516689098.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:39.090Z,1516689099.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:39.494Z,1516689099.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:39.897Z,1516689099.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:40.294Z,1516689100.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:40.690Z,1516689100.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:41.090Z,1516689101.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:41.494Z,1516689101.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:41.898Z,1516689101.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:42.325Z,1516689102.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:42.697Z,1516689102.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:43.092Z,1516689103.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:43.494Z,1516689103.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:43.852Z,1516689103.852 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T06:31:43.852Z,1516689103.852 [NAL9602] Data Fault, FailCount= 3 2018-01-23T06:31:43.852Z,1516689103.852 [NAL9602](ERROR): Data Fault 2018-01-23T06:31:43.908Z,1516689103.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:43.930Z,1516689103.930 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T06:31:44.252Z,1516689104.252 [NAL9602](INFO): Powering down 2018-01-23T06:31:44.301Z,1516689104.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:44.696Z,1516689104.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:45.092Z,1516689105.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:45.105Z,1516689105.105 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:31:45.105Z,1516689105.105 [NAL9602] No Fault, FailCount= 3 2018-01-23T06:31:45.505Z,1516689105.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:45.896Z,1516689105.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:48.997Z,1516689108.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:49.134Z,1516689109.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:49.485Z,1516689109.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:49.863Z,1516689109.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:50.260Z,1516689110.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:50.664Z,1516689110.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:51.070Z,1516689111.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:51.460Z,1516689111.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:51.865Z,1516689111.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:52.271Z,1516689112.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:52.660Z,1516689112.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:53.065Z,1516689113.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:53.461Z,1516689113.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:53.862Z,1516689113.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:54.269Z,1516689114.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:54.685Z,1516689114.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:55.063Z,1516689115.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:55.473Z,1516689115.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:55.863Z,1516689115.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:56.265Z,1516689116.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:56.669Z,1516689116.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:57.062Z,1516689117.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:57.462Z,1516689117.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:57.873Z,1516689117.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:58.269Z,1516689118.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:58.660Z,1516689118.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:59.063Z,1516689119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:59.465Z,1516689119.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:31:59.869Z,1516689119.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:00.265Z,1516689120.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:00.662Z,1516689120.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:01.065Z,1516689121.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:01.472Z,1516689121.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:01.866Z,1516689121.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:02.260Z,1516689122.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:02.667Z,1516689122.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:03.072Z,1516689123.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:03.464Z,1516689123.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:03.873Z,1516689123.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:04.265Z,1516689124.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:04.662Z,1516689124.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:05.072Z,1516689125.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:05.462Z,1516689125.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:05.866Z,1516689125.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:06.273Z,1516689126.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:06.707Z,1516689126.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:07.067Z,1516689127.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:07.466Z,1516689127.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:07.868Z,1516689127.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:08.264Z,1516689128.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:08.676Z,1516689128.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:09.065Z,1516689129.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:09.463Z,1516689129.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:09.869Z,1516689129.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:10.270Z,1516689130.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:10.665Z,1516689130.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:11.067Z,1516689131.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:11.468Z,1516689131.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:11.870Z,1516689131.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:12.268Z,1516689132.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:12.665Z,1516689132.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:13.065Z,1516689133.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:13.474Z,1516689133.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:13.866Z,1516689133.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:14.266Z,1516689134.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:14.633Z,1516689134.633 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:32:14.677Z,1516689134.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:15.070Z,1516689135.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:15.465Z,1516689135.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:15.868Z,1516689135.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:16.265Z,1516689136.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:16.664Z,1516689136.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:17.069Z,1516689137.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:17.459Z,1516689137.459 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T06:32:17.477Z,1516689137.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:17.865Z,1516689137.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:18.267Z,1516689138.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:18.685Z,1516689138.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:19.065Z,1516689139.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:19.475Z,1516689139.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:19.865Z,1516689139.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:20.277Z,1516689140.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:20.671Z,1516689140.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:21.076Z,1516689141.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:21.464Z,1516689141.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:21.877Z,1516689141.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:22.270Z,1516689142.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:22.668Z,1516689142.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:23.068Z,1516689143.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:23.480Z,1516689143.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:23.873Z,1516689143.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:24.277Z,1516689144.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:24.694Z,1516689144.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:25.088Z,1516689145.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:25.485Z,1516689145.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:25.824Z,1516689145.824 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:32:25.875Z,1516689145.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:26.267Z,1516689146.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:26.703Z,1516689146.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:27.069Z,1516689147.069 [PNI_TCM](ERROR): CRC does not match. Expected:0x40624 got:0x62793 2018-01-23T06:32:27.107Z,1516689147.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:27.469Z,1516689147.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:27.877Z,1516689147.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:28.285Z,1516689148.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:28.680Z,1516689148.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:29.079Z,1516689149.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:29.477Z,1516689149.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:29.883Z,1516689149.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:30.276Z,1516689150.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:30.673Z,1516689150.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:31.070Z,1516689151.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:31.486Z,1516689151.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:31.880Z,1516689151.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:32.277Z,1516689152.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:32.669Z,1516689152.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:33.087Z,1516689153.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:33.463Z,1516689153.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:33.872Z,1516689153.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:34.270Z,1516689154.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:34.700Z,1516689154.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:35.084Z,1516689155.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:35.479Z,1516689155.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:35.885Z,1516689155.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:36.277Z,1516689156.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:36.668Z,1516689156.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:37.064Z,1516689157.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:37.476Z,1516689157.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:37.904Z,1516689157.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:38.274Z,1516689158.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:38.672Z,1516689158.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:39.072Z,1516689159.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:39.471Z,1516689159.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:39.874Z,1516689159.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:40.273Z,1516689160.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:40.679Z,1516689160.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:41.091Z,1516689161.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:41.477Z,1516689161.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:41.872Z,1516689161.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:42.273Z,1516689162.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:42.670Z,1516689162.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:43.071Z,1516689163.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:43.478Z,1516689163.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:43.889Z,1516689163.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:44.300Z,1516689164.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:44.671Z,1516689164.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:45.078Z,1516689165.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:45.480Z,1516689165.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:45.875Z,1516689165.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:46.276Z,1516689166.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:49.376Z,1516689169.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:49.529Z,1516689169.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:49.865Z,1516689169.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:50.249Z,1516689170.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:50.641Z,1516689170.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:51.040Z,1516689171.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:51.454Z,1516689171.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:51.846Z,1516689171.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:52.258Z,1516689172.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:52.640Z,1516689172.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:53.040Z,1516689173.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:53.440Z,1516689173.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:53.841Z,1516689173.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:54.240Z,1516689174.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:54.661Z,1516689174.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:55.054Z,1516689175.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:55.452Z,1516689175.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:55.848Z,1516689175.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:56.251Z,1516689176.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:56.649Z,1516689176.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:57.047Z,1516689177.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:57.455Z,1516689177.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:57.861Z,1516689177.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:58.254Z,1516689178.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:58.659Z,1516689178.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:59.086Z,1516689179.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:59.449Z,1516689179.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:32:59.853Z,1516689179.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:00.229Z,1516689180.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:00.657Z,1516689180.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:01.058Z,1516689181.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:01.460Z,1516689181.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:01.832Z,1516689181.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:02.231Z,1516689182.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:02.638Z,1516689182.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:03.039Z,1516689183.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:03.446Z,1516689183.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:03.868Z,1516689183.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:04.249Z,1516689184.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:04.640Z,1516689184.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:05.039Z,1516689185.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:05.450Z,1516689185.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:05.846Z,1516689185.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:06.238Z,1516689186.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:06.653Z,1516689186.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:07.053Z,1516689187.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:07.460Z,1516689187.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:07.849Z,1516689187.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:08.245Z,1516689188.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:08.654Z,1516689188.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:09.041Z,1516689189.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:09.450Z,1516689189.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:09.857Z,1516689189.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:10.257Z,1516689190.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:10.644Z,1516689190.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:11.049Z,1516689191.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:11.453Z,1516689191.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:11.840Z,1516689191.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:12.241Z,1516689192.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:12.663Z,1516689192.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:13.053Z,1516689193.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:13.463Z,1516689193.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:13.849Z,1516689193.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:14.244Z,1516689194.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:14.644Z,1516689194.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:15.041Z,1516689195.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:15.450Z,1516689195.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:15.857Z,1516689195.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:16.250Z,1516689196.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:16.644Z,1516689196.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:17.041Z,1516689197.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:17.449Z,1516689197.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:17.844Z,1516689197.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:18.249Z,1516689198.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:18.654Z,1516689198.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:19.055Z,1516689199.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:19.451Z,1516689199.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:19.845Z,1516689199.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:20.243Z,1516689200.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:20.646Z,1516689200.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:21.045Z,1516689201.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:21.453Z,1516689201.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:21.854Z,1516689201.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:22.254Z,1516689202.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:22.649Z,1516689202.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:23.037Z,1516689203.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:23.452Z,1516689203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:23.844Z,1516689203.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:24.229Z,1516689204.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:24.654Z,1516689204.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.066Z,1516689205.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.462Z,1516689205.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.839Z,1516689205.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.839Z,1516689205.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-01-23T06:33:25.840Z,1516689205.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:33:25.841Z,1516689205.841 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.841Z,1516689205.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-01-23T06:33:25.841Z,1516689205.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:33:25.843Z,1516689205.843 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:25.843Z,1516689205.843 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66 2018-01-23T06:33:25.843Z,1516689205.843 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:33:25.875Z,1516689205.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:33:25.875Z,1516689205.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:33:25.876Z,1516689205.876 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:33:26.275Z,1516689206.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:33:26.275Z,1516689206.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-01-23T06:33:26.276Z,1516689206.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:33:26.276Z,1516689206.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-01-23T06:33:26.276Z,1516689206.276 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:33:26.276Z,1516689206.276 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66 2018-01-23T06:33:26.640Z,1516689206.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:33:26.641Z,1516689206.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:33:26.641Z,1516689206.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:33:26.641Z,1516689206.641 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:33:26.642Z,1516689206.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:33:26.642Z,1516689206.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:33:26.642Z,1516689206.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:33:26.643Z,1516689206.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:33:26.643Z,1516689206.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:33:27.047Z,1516689207.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:33:27.048Z,1516689207.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:27.454Z,1516689207.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:33:27.455Z,1516689207.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:27.852Z,1516689207.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:33:27.853Z,1516689207.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:28.249Z,1516689208.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:33:28.250Z,1516689208.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:28.643Z,1516689208.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:33:28.644Z,1516689208.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:29.040Z,1516689209.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:33:29.041Z,1516689209.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:29.457Z,1516689209.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:33:29.458Z,1516689209.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:29.857Z,1516689209.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:33:29.858Z,1516689209.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:30.249Z,1516689210.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:33:30.250Z,1516689210.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:30.685Z,1516689210.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:33:30.685Z,1516689210.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:31.046Z,1516689211.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:33:31.048Z,1516689211.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:31.451Z,1516689211.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:33:31.452Z,1516689211.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:31.853Z,1516689211.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:33:31.854Z,1516689211.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:32.262Z,1516689212.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:33:32.263Z,1516689212.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:32.641Z,1516689212.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:33:32.642Z,1516689212.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:33.047Z,1516689213.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:33:33.048Z,1516689213.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:33.462Z,1516689213.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:33:33.464Z,1516689213.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:33.854Z,1516689213.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:33:33.855Z,1516689213.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:34.264Z,1516689214.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:33:34.265Z,1516689214.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:34.649Z,1516689214.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:33:34.650Z,1516689214.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:35.051Z,1516689215.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:33:35.052Z,1516689215.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:35.453Z,1516689215.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:33:35.454Z,1516689215.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:35.858Z,1516689215.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:33:35.859Z,1516689215.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:36.252Z,1516689216.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:33:36.253Z,1516689216.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:36.648Z,1516689216.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:33:36.649Z,1516689216.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:37.058Z,1516689217.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:33:37.059Z,1516689217.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:37.453Z,1516689217.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:33:37.454Z,1516689217.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:37.862Z,1516689217.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:33:37.867Z,1516689217.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:38.268Z,1516689218.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:33:38.269Z,1516689218.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:38.647Z,1516689218.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:33:38.648Z,1516689218.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:39.040Z,1516689219.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:33:39.041Z,1516689219.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:39.465Z,1516689219.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:33:39.466Z,1516689219.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:39.850Z,1516689219.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:33:39.859Z,1516689219.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:40.254Z,1516689220.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:33:40.271Z,1516689220.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:40.641Z,1516689220.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:33:40.642Z,1516689220.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:41.048Z,1516689221.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:33:41.049Z,1516689221.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:41.452Z,1516689221.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:33:41.453Z,1516689221.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:41.849Z,1516689221.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:33:41.851Z,1516689221.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:42.256Z,1516689222.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:33:42.257Z,1516689222.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:42.642Z,1516689222.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:33:42.644Z,1516689222.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:43.044Z,1516689223.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:33:43.045Z,1516689223.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:43.450Z,1516689223.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:33:43.452Z,1516689223.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:43.853Z,1516689223.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:33:43.854Z,1516689223.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:44.250Z,1516689224.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:33:44.251Z,1516689224.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:44.642Z,1516689224.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:33:44.643Z,1516689224.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:45.050Z,1516689225.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:33:45.051Z,1516689225.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:45.054Z,1516689225.054 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:33:45.055Z,1516689225.055 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:33:45.055Z,1516689225.055 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:33:45.055Z,1516689225.055 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:33:45.460Z,1516689225.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:33:45.461Z,1516689225.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:45.489Z,1516689225.489 [Default:CheckIn:D] Stopped 2018-01-23T06:33:45.489Z,1516689225.489 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:33:45.853Z,1516689225.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:45.857Z,1516689225.857 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 195.890479 min 2018-01-23T06:33:45.857Z,1516689225.857 [Default:CheckIn:E] Stopped 2018-01-23T06:33:45.857Z,1516689225.857 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:33:45.857Z,1516689225.857 [Default:CheckIn] Stopped 2018-01-23T06:33:45.857Z,1516689225.857 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:33:45.858Z,1516689225.858 [Default:CheckIn](INFO): Running loop #20 2018-01-23T06:33:45.858Z,1516689225.858 [Default:CheckIn] Running Loop=20 2018-01-23T06:33:45.858Z,1516689225.858 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:33:45.858Z,1516689225.858 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:33:46.250Z,1516689226.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:46.641Z,1516689226.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:49.736Z,1516689229.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:49.885Z,1516689229.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:50.210Z,1516689230.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:50.616Z,1516689230.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:51.005Z,1516689231.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:51.412Z,1516689231.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:51.805Z,1516689231.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:52.202Z,1516689232.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:52.613Z,1516689232.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:53.038Z,1516689233.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:53.413Z,1516689233.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:53.807Z,1516689233.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:54.204Z,1516689234.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:54.602Z,1516689234.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:55.005Z,1516689235.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:55.404Z,1516689235.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:55.813Z,1516689235.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:56.214Z,1516689236.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:56.610Z,1516689236.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:57.003Z,1516689237.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:57.403Z,1516689237.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:57.809Z,1516689237.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:58.202Z,1516689238.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:58.613Z,1516689238.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:59.014Z,1516689239.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:59.409Z,1516689239.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:33:59.803Z,1516689239.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:00.208Z,1516689240.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:00.603Z,1516689240.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:01.004Z,1516689241.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:01.417Z,1516689241.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:01.819Z,1516689241.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:02.225Z,1516689242.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:02.625Z,1516689242.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:03.014Z,1516689243.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:03.412Z,1516689243.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:03.817Z,1516689243.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:04.217Z,1516689244.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:04.618Z,1516689244.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:05.018Z,1516689245.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:05.424Z,1516689245.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:05.817Z,1516689245.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:06.209Z,1516689246.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:06.612Z,1516689246.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:07.012Z,1516689247.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:07.413Z,1516689247.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:07.814Z,1516689247.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:08.219Z,1516689248.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:08.628Z,1516689248.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:09.006Z,1516689249.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:09.417Z,1516689249.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:09.817Z,1516689249.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:10.221Z,1516689250.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:10.623Z,1516689250.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:11.023Z,1516689251.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:11.424Z,1516689251.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:11.816Z,1516689251.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:12.208Z,1516689252.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:12.617Z,1516689252.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:13.001Z,1516689253.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:13.404Z,1516689253.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:13.831Z,1516689253.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:14.233Z,1516689254.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:14.631Z,1516689254.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:15.009Z,1516689255.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:15.405Z,1516689255.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:15.792Z,1516689255.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:15.806Z,1516689255.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:16.188Z,1516689256.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:16.210Z,1516689256.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:16.239Z,1516689256.239 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:34:16.600Z,1516689256.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:16.614Z,1516689256.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:17.000Z,1516689257.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:17.014Z,1516689257.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:17.401Z,1516689257.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:17.415Z,1516689257.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:17.798Z,1516689257.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:17.813Z,1516689257.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:18.199Z,1516689258.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:18.213Z,1516689258.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:18.591Z,1516689258.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:18.605Z,1516689258.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:18.985Z,1516689258.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:19.008Z,1516689259.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:19.392Z,1516689259.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:19.405Z,1516689259.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:19.804Z,1516689259.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:19.818Z,1516689259.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:20.205Z,1516689260.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:20.219Z,1516689260.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:20.602Z,1516689260.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:20.616Z,1516689260.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:20.981Z,1516689260.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:21.014Z,1516689261.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:21.381Z,1516689261.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:21.417Z,1516689261.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:21.796Z,1516689261.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:21.810Z,1516689261.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:22.181Z,1516689262.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:22.216Z,1516689262.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:22.601Z,1516689262.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:22.621Z,1516689262.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:23.005Z,1516689263.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:23.020Z,1516689263.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:23.400Z,1516689263.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:23.416Z,1516689263.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:23.780Z,1516689263.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:23.818Z,1516689263.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:24.181Z,1516689264.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:24.213Z,1516689264.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:24.581Z,1516689264.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:24.613Z,1516689264.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:24.982Z,1516689264.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:25.008Z,1516689265.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:25.381Z,1516689265.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:25.417Z,1516689265.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:25.801Z,1516689265.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:25.815Z,1516689265.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:26.203Z,1516689266.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:26.217Z,1516689266.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:26.599Z,1516689266.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:26.625Z,1516689266.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:26.981Z,1516689266.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:27.015Z,1516689267.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:27.381Z,1516689267.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:27.415Z,1516689267.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:27.782Z,1516689267.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:27.821Z,1516689267.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:28.181Z,1516689268.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:28.213Z,1516689268.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:28.596Z,1516689268.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:28.623Z,1516689268.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:29.004Z,1516689269.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:29.018Z,1516689269.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:29.400Z,1516689269.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:29.415Z,1516689269.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:29.781Z,1516689269.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:29.813Z,1516689269.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:30.181Z,1516689270.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:30.220Z,1516689270.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:30.581Z,1516689270.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:30.607Z,1516689270.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:30.982Z,1516689270.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:31.013Z,1516689271.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:31.381Z,1516689271.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:31.416Z,1516689271.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:31.805Z,1516689271.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:31.819Z,1516689271.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:32.204Z,1516689272.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:32.218Z,1516689272.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:32.600Z,1516689272.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:32.614Z,1516689272.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:32.981Z,1516689272.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:33.007Z,1516689273.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:33.381Z,1516689273.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:34:33.413Z,1516689273.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:33.816Z,1516689273.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:34.205Z,1516689274.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:34.622Z,1516689274.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:35.019Z,1516689275.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:35.415Z,1516689275.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:35.821Z,1516689275.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:36.213Z,1516689276.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:36.609Z,1516689276.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:37.012Z,1516689277.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:37.409Z,1516689277.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:37.817Z,1516689277.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:38.228Z,1516689278.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:38.626Z,1516689278.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:39.017Z,1516689279.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:39.401Z,1516689279.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:39.804Z,1516689279.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:40.225Z,1516689280.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:40.630Z,1516689280.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:41.013Z,1516689281.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:41.409Z,1516689281.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:41.804Z,1516689281.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:42.203Z,1516689282.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:42.613Z,1516689282.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:43.008Z,1516689283.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:43.404Z,1516689283.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:43.814Z,1516689283.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:44.212Z,1516689284.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:44.613Z,1516689284.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:45.007Z,1516689285.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:45.411Z,1516689285.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:45.805Z,1516689285.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:46.209Z,1516689286.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:46.621Z,1516689286.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:47.013Z,1516689287.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:50.113Z,1516689290.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:50.253Z,1516689290.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:50.616Z,1516689290.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:51.004Z,1516689291.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:51.409Z,1516689291.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:51.816Z,1516689291.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:52.212Z,1516689292.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:52.616Z,1516689292.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:53.006Z,1516689293.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:53.402Z,1516689293.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:53.806Z,1516689293.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:54.211Z,1516689294.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:54.621Z,1516689294.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:55.025Z,1516689295.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:55.415Z,1516689295.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:55.809Z,1516689295.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:56.213Z,1516689296.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:56.596Z,1516689296.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:57.001Z,1516689297.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:57.396Z,1516689297.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:57.826Z,1516689297.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:58.206Z,1516689298.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:58.610Z,1516689298.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:58.000Z,1516689299.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:59.397Z,1516689299.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:34:59.801Z,1516689299.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:00.201Z,1516689300.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:00.603Z,1516689300.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:01.029Z,1516689301.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:01.409Z,1516689301.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:01.805Z,1516689301.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:02.201Z,1516689302.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:02.600Z,1516689302.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:03.009Z,1516689303.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:03.403Z,1516689303.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:03.806Z,1516689303.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:04.209Z,1516689304.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:04.606Z,1516689304.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:04.000Z,1516689305.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:05.399Z,1516689305.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:05.807Z,1516689305.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:06.200Z,1516689306.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:06.610Z,1516689306.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:07.010Z,1516689307.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:07.409Z,1516689307.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:07.809Z,1516689307.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:08.204Z,1516689308.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:08.600Z,1516689308.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:09.002Z,1516689309.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:09.407Z,1516689309.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:09.810Z,1516689309.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:10.213Z,1516689310.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:10.613Z,1516689310.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:11.004Z,1516689311.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:11.399Z,1516689311.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:11.807Z,1516689311.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:12.204Z,1516689312.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:12.612Z,1516689312.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:13.014Z,1516689313.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:13.414Z,1516689313.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:13.804Z,1516689313.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:14.203Z,1516689314.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:14.611Z,1516689314.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:15.013Z,1516689315.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:15.413Z,1516689315.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:15.805Z,1516689315.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:16.205Z,1516689316.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:16.614Z,1516689316.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:17.017Z,1516689317.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:17.410Z,1516689317.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:17.804Z,1516689317.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:18.205Z,1516689318.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:18.610Z,1516689318.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:19.025Z,1516689319.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:19.414Z,1516689319.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:19.802Z,1516689319.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:20.213Z,1516689320.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:20.618Z,1516689320.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:21.018Z,1516689321.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:21.414Z,1516689321.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:21.805Z,1516689321.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:22.197Z,1516689322.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:22.614Z,1516689322.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:23.015Z,1516689323.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:23.414Z,1516689323.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:23.810Z,1516689323.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:24.209Z,1516689324.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:24.616Z,1516689324.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:25.018Z,1516689325.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:25.414Z,1516689325.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:25.806Z,1516689325.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:26.210Z,1516689326.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:26.612Z,1516689326.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:27.018Z,1516689327.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:27.418Z,1516689327.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:27.812Z,1516689327.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:28.197Z,1516689328.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:28.614Z,1516689328.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:29.015Z,1516689329.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:29.453Z,1516689329.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:29.862Z,1516689329.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:30.213Z,1516689330.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:30.617Z,1516689330.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:31.025Z,1516689331.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:31.463Z,1516689331.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:31.821Z,1516689331.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:32.229Z,1516689332.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:32.621Z,1516689332.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:33.038Z,1516689333.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:33.439Z,1516689333.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:33.884Z,1516689333.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:34.222Z,1516689334.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:34.640Z,1516689334.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:35.056Z,1516689335.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:35.448Z,1516689335.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:35.840Z,1516689335.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:36.247Z,1516689336.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:36.637Z,1516689336.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:37.033Z,1516689337.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:37.400Z,1516689337.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:37.448Z,1516689337.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:37.790Z,1516689337.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:37.813Z,1516689337.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:38.188Z,1516689338.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:38.209Z,1516689338.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:38.599Z,1516689338.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:38.645Z,1516689338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:39.000Z,1516689339.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:39.053Z,1516689339.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:39.400Z,1516689339.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:39.414Z,1516689339.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:39.791Z,1516689339.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:39.806Z,1516689339.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:40.183Z,1516689340.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:40.201Z,1516689340.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:40.600Z,1516689340.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:40.614Z,1516689340.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:41.001Z,1516689341.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:41.015Z,1516689341.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:41.392Z,1516689341.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:41.419Z,1516689341.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:41.782Z,1516689341.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:41.808Z,1516689341.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:42.180Z,1516689342.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:42.211Z,1516689342.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:42.588Z,1516689342.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:42.619Z,1516689342.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:43.007Z,1516689343.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:43.021Z,1516689343.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:43.401Z,1516689343.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:43.414Z,1516689343.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:43.793Z,1516689343.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:43.807Z,1516689343.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:44.195Z,1516689344.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:44.209Z,1516689344.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:44.601Z,1516689344.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:44.615Z,1516689344.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:44.995Z,1516689344.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:45.009Z,1516689345.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:45.404Z,1516689345.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:45.418Z,1516689345.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:45.794Z,1516689345.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:45.808Z,1516689345.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:46.178Z,1516689346.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:46.204Z,1516689346.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:46.601Z,1516689346.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:46.615Z,1516689346.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:47.003Z,1516689347.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:47.017Z,1516689347.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:47.392Z,1516689347.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:47.414Z,1516689347.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:50.514Z,1516689350.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:50.528Z,1516689350.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:50.630Z,1516689350.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:50.664Z,1516689350.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:51.036Z,1516689351.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:51.056Z,1516689351.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:51.457Z,1516689351.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:51.471Z,1516689351.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:51.836Z,1516689351.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:51.860Z,1516689351.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:52.218Z,1516689352.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:52.232Z,1516689352.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:52.623Z,1516689352.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:52.637Z,1516689352.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:53.020Z,1516689353.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:53.040Z,1516689353.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:53.432Z,1516689353.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:53.447Z,1516689353.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:53.832Z,1516689353.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:53.847Z,1516689353.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:54.235Z,1516689354.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:54.257Z,1516689354.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:54.640Z,1516689354.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:54.666Z,1516689354.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:55.026Z,1516689355.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:55.040Z,1516689355.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:55.426Z,1516689355.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:55.441Z,1516689355.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:55.818Z,1516689355.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:55.832Z,1516689355.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:56.217Z,1516689356.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:56.231Z,1516689356.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:56.632Z,1516689356.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:56.653Z,1516689356.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:57.054Z,1516689357.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:57.080Z,1516689357.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:57.424Z,1516689357.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:57.441Z,1516689357.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:57.823Z,1516689357.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:57.837Z,1516689357.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:58.221Z,1516689358.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:58.240Z,1516689358.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:58.632Z,1516689358.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:58.646Z,1516689358.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:59.028Z,1516689359.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:59.042Z,1516689359.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:59.426Z,1516689359.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:59.441Z,1516689359.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:35:59.828Z,1516689359.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:35:59.842Z,1516689359.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:00.226Z,1516689360.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:00.241Z,1516689360.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:00.626Z,1516689360.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:00.641Z,1516689360.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:01.028Z,1516689361.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:01.042Z,1516689361.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:01.432Z,1516689361.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:01.447Z,1516689361.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:01.827Z,1516689361.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:01.841Z,1516689361.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:02.226Z,1516689362.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:02.240Z,1516689362.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:02.628Z,1516689362.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:02.643Z,1516689362.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:03.029Z,1516689363.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:03.044Z,1516689363.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:03.439Z,1516689363.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:03.473Z,1516689363.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:03.827Z,1516689363.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:03.841Z,1516689363.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:04.221Z,1516689364.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:04.235Z,1516689364.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:04.644Z,1516689364.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:04.667Z,1516689364.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:05.032Z,1516689365.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:05.069Z,1516689365.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:05.440Z,1516689365.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:05.454Z,1516689365.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:05.823Z,1516689365.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:05.837Z,1516689365.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:06.224Z,1516689366.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:06.239Z,1516689366.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:06.630Z,1516689366.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:06.645Z,1516689366.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:07.032Z,1516689367.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:07.046Z,1516689367.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:07.432Z,1516689367.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:07.447Z,1516689367.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:07.821Z,1516689367.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:07.847Z,1516689367.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:08.228Z,1516689368.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:08.242Z,1516689368.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:08.634Z,1516689368.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:08.687Z,1516689368.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:09.040Z,1516689369.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:09.054Z,1516689369.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:09.437Z,1516689369.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:09.450Z,1516689369.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:09.819Z,1516689369.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:09.849Z,1516689369.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:10.219Z,1516689370.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:10.241Z,1516689370.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:10.637Z,1516689370.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:10.656Z,1516689370.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:11.038Z,1516689371.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:11.057Z,1516689371.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:11.436Z,1516689371.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:11.450Z,1516689371.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:11.828Z,1516689371.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:11.841Z,1516689371.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:12.220Z,1516689372.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:12.241Z,1516689372.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:12.632Z,1516689372.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:12.655Z,1516689372.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:13.039Z,1516689373.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:13.053Z,1516689373.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:13.428Z,1516689373.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:13.460Z,1516689373.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:13.835Z,1516689373.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:13.849Z,1516689373.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:14.256Z,1516689374.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:14.668Z,1516689374.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:15.057Z,1516689375.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:15.457Z,1516689375.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:15.847Z,1516689375.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:16.234Z,1516689376.234 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T06:36:16.261Z,1516689376.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:16.647Z,1516689376.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:17.053Z,1516689377.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:17.453Z,1516689377.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:17.850Z,1516689377.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:18.249Z,1516689378.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:18.648Z,1516689378.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:19.053Z,1516689379.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:19.445Z,1516689379.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:19.842Z,1516689379.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x65315 got:0x6466 2018-01-23T06:36:19.869Z,1516689379.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:20.255Z,1516689380.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:20.654Z,1516689380.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:21.049Z,1516689381.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:21.436Z,1516689381.436 [PNI_TCM](ERROR): CRC does not match. Expected:0x25025 got:0x24721 2018-01-23T06:36:21.453Z,1516689381.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:21.845Z,1516689381.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:22.247Z,1516689382.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:22.613Z,1516689382.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:22.653Z,1516689382.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:23.026Z,1516689383.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:23.053Z,1516689383.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:23.436Z,1516689383.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:23.458Z,1516689383.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:23.824Z,1516689383.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:23.864Z,1516689383.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:24.211Z,1516689384.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:24.255Z,1516689384.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:24.613Z,1516689384.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:24.644Z,1516689384.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:25.016Z,1516689385.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:25.030Z,1516689385.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:25.413Z,1516689385.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:25.460Z,1516689385.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:25.824Z,1516689385.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:25.857Z,1516689385.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:26.230Z,1516689386.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:26.262Z,1516689386.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:26.626Z,1516689386.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:26.661Z,1516689386.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:26.661Z,1516689386.661 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-01-23T06:36:26.661Z,1516689386.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:36:26.662Z,1516689386.662 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:26.663Z,1516689386.663 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-01-23T06:36:26.663Z,1516689386.663 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:36:26.665Z,1516689386.665 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:26.665Z,1516689386.665 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67 2018-01-23T06:36:26.665Z,1516689386.665 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:36:26.677Z,1516689386.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:36:26.677Z,1516689386.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:36:26.677Z,1516689386.677 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:36:27.017Z,1516689387.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:27.074Z,1516689387.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:36:27.074Z,1516689387.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-01-23T06:36:27.075Z,1516689387.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:36:27.075Z,1516689387.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-01-23T06:36:27.076Z,1516689387.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:36:27.076Z,1516689387.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67 2018-01-23T06:36:27.417Z,1516689387.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:27.460Z,1516689387.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:36:27.460Z,1516689387.460 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:36:27.461Z,1516689387.461 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:36:27.461Z,1516689387.461 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:36:27.462Z,1516689387.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:36:27.462Z,1516689387.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:36:27.462Z,1516689387.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:36:27.463Z,1516689387.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:36:27.463Z,1516689387.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:36:27.828Z,1516689387.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:27.860Z,1516689387.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:36:27.861Z,1516689387.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:28.228Z,1516689388.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:28.260Z,1516689388.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:36:28.261Z,1516689388.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:28.625Z,1516689388.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:28.668Z,1516689388.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:36:28.669Z,1516689388.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:29.038Z,1516689389.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:29.068Z,1516689389.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:36:29.069Z,1516689389.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:29.448Z,1516689389.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:29.468Z,1516689389.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:36:29.469Z,1516689389.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:29.837Z,1516689389.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:29.861Z,1516689389.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:36:29.862Z,1516689389.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:30.214Z,1516689390.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:30.260Z,1516689390.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:36:30.261Z,1516689390.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:30.622Z,1516689390.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:30.661Z,1516689390.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:36:30.662Z,1516689390.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:31.027Z,1516689391.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:31.060Z,1516689391.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:36:31.061Z,1516689391.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:31.415Z,1516689391.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:31.432Z,1516689391.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:36:31.433Z,1516689391.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:31.836Z,1516689391.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:31.868Z,1516689391.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:36:31.869Z,1516689391.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:32.228Z,1516689392.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:32.281Z,1516689392.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:36:32.282Z,1516689392.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:32.624Z,1516689392.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:32.641Z,1516689392.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:36:32.642Z,1516689392.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:33.029Z,1516689393.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:33.064Z,1516689393.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:36:33.065Z,1516689393.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:33.421Z,1516689393.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:33.444Z,1516689393.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:36:33.445Z,1516689393.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:33.820Z,1516689393.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:33.835Z,1516689393.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:36:33.836Z,1516689393.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:34.220Z,1516689394.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:34.241Z,1516689394.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:36:34.242Z,1516689394.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:34.619Z,1516689394.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:34.652Z,1516689394.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:36:34.653Z,1516689394.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:35.031Z,1516689395.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:35.045Z,1516689395.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:36:35.046Z,1516689395.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:35.434Z,1516689395.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:35.452Z,1516689395.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:36:35.453Z,1516689395.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:35.834Z,1516689395.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:35.850Z,1516689395.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:36:35.851Z,1516689395.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:36.215Z,1516689396.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:36.256Z,1516689396.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:36:36.257Z,1516689396.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:36.625Z,1516689396.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:36.660Z,1516689396.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:36:36.661Z,1516689396.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:37.027Z,1516689397.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:37.040Z,1516689397.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:36:37.041Z,1516689397.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:37.411Z,1516689397.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:37.447Z,1516689397.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:36:37.448Z,1516689397.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:37.839Z,1516689397.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:36:37.853Z,1516689397.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:36:37.854Z,1516689397.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:38.269Z,1516689398.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:36:38.270Z,1516689398.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:38.646Z,1516689398.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:36:38.648Z,1516689398.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:39.044Z,1516689399.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:36:39.045Z,1516689399.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:39.447Z,1516689399.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:36:39.448Z,1516689399.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:39.840Z,1516689399.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:36:39.841Z,1516689399.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:40.235Z,1516689400.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:36:40.236Z,1516689400.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:40.658Z,1516689400.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:36:40.659Z,1516689400.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:41.060Z,1516689401.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:36:41.061Z,1516689401.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:41.471Z,1516689401.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:36:41.472Z,1516689401.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:41.854Z,1516689401.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:36:41.856Z,1516689401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:42.225Z,1516689402.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:36:42.225Z,1516689402.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:42.627Z,1516689402.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:36:42.628Z,1516689402.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:43.031Z,1516689403.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:36:43.032Z,1516689403.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:43.428Z,1516689403.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:36:43.429Z,1516689403.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:43.861Z,1516689403.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:36:43.862Z,1516689403.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:44.267Z,1516689404.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:36:44.267Z,1516689404.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:44.660Z,1516689404.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:36:44.661Z,1516689404.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:45.065Z,1516689405.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:36:45.066Z,1516689405.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:45.434Z,1516689405.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:36:45.435Z,1516689405.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:45.834Z,1516689405.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:36:45.836Z,1516689405.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:46.235Z,1516689406.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:36:46.236Z,1516689406.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:46.642Z,1516689406.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:36:46.643Z,1516689406.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:47.042Z,1516689407.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:47.444Z,1516689407.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:50.535Z,1516689410.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:50.676Z,1516689410.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:51.016Z,1516689411.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:51.400Z,1516689411.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:51.828Z,1516689411.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:52.233Z,1516689412.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:52.624Z,1516689412.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:53.006Z,1516689413.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:53.405Z,1516689413.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:53.801Z,1516689413.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:54.202Z,1516689414.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:54.600Z,1516689414.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:55.003Z,1516689415.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:55.408Z,1516689415.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:55.813Z,1516689415.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:56.201Z,1516689416.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:56.600Z,1516689416.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:57.002Z,1516689417.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:57.405Z,1516689417.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:57.837Z,1516689417.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:58.210Z,1516689418.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:58.608Z,1516689418.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:59.004Z,1516689419.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:59.399Z,1516689419.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:36:59.808Z,1516689419.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:00.200Z,1516689420.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:00.601Z,1516689420.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:01.016Z,1516689421.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:01.432Z,1516689421.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:01.814Z,1516689421.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:02.200Z,1516689422.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:02.609Z,1516689422.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:03.002Z,1516689423.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:03.408Z,1516689423.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:03.810Z,1516689423.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:04.213Z,1516689424.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:04.610Z,1516689424.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:05.006Z,1516689425.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:05.413Z,1516689425.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:05.808Z,1516689425.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:06.204Z,1516689426.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:06.611Z,1516689426.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:07.021Z,1516689427.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:07.420Z,1516689427.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:07.813Z,1516689427.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:08.213Z,1516689428.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:08.589Z,1516689428.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:09.016Z,1516689429.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:09.420Z,1516689429.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:09.821Z,1516689429.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:10.224Z,1516689430.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:10.614Z,1516689430.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:11.013Z,1516689431.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:11.395Z,1516689431.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:11.797Z,1516689431.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:12.197Z,1516689432.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:12.601Z,1516689432.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:13.006Z,1516689433.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:13.410Z,1516689433.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:13.814Z,1516689433.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:14.204Z,1516689434.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:14.605Z,1516689434.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:15.003Z,1516689435.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:15.400Z,1516689435.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:15.806Z,1516689435.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:16.206Z,1516689436.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:16.606Z,1516689436.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:17.005Z,1516689437.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:17.403Z,1516689437.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:17.802Z,1516689437.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:18.201Z,1516689438.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:18.600Z,1516689438.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:19.018Z,1516689439.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:19.413Z,1516689439.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:19.809Z,1516689439.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:20.187Z,1516689440.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:20.201Z,1516689440.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:20.580Z,1516689440.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:20.607Z,1516689440.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:20.984Z,1516689440.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:21.007Z,1516689441.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:21.405Z,1516689441.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:21.814Z,1516689441.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:22.218Z,1516689442.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:22.612Z,1516689442.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:23.008Z,1516689443.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:23.408Z,1516689443.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:23.824Z,1516689443.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:24.214Z,1516689444.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:24.612Z,1516689444.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:24.977Z,1516689444.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:25.013Z,1516689445.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:25.381Z,1516689445.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:25.407Z,1516689445.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:25.796Z,1516689445.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:25.815Z,1516689445.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:26.196Z,1516689446.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:26.229Z,1516689446.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:26.597Z,1516689446.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:26.611Z,1516689446.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:26.978Z,1516689446.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:27.013Z,1516689447.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:27.378Z,1516689447.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:27.393Z,1516689447.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:27.788Z,1516689447.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:27.823Z,1516689447.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:28.200Z,1516689448.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:28.233Z,1516689448.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:28.589Z,1516689448.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:28.611Z,1516689448.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:28.985Z,1516689448.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:28.999Z,1516689448.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:29.383Z,1516689449.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:29.409Z,1516689449.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:29.801Z,1516689449.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:29.831Z,1516689449.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:30.193Z,1516689450.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:30.213Z,1516689450.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:30.593Z,1516689450.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:30.608Z,1516689450.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:30.986Z,1516689450.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:31.017Z,1516689451.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:31.392Z,1516689451.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:31.406Z,1516689451.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:31.805Z,1516689451.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:31.843Z,1516689451.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:32.193Z,1516689452.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:32.207Z,1516689452.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:32.592Z,1516689452.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:32.611Z,1516689452.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:32.982Z,1516689452.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:33.009Z,1516689453.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:33.387Z,1516689453.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:33.402Z,1516689453.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:33.797Z,1516689453.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:33.811Z,1516689453.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:34.196Z,1516689454.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:34.217Z,1516689454.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:34.598Z,1516689454.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:34.613Z,1516689454.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:34.982Z,1516689454.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:35.020Z,1516689455.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:35.380Z,1516689455.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:35.406Z,1516689455.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:35.813Z,1516689455.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:36.218Z,1516689456.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:36.621Z,1516689456.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:37.017Z,1516689457.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:37.411Z,1516689457.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:37.821Z,1516689457.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:38.216Z,1516689458.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:38.617Z,1516689458.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:39.004Z,1516689459.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:39.391Z,1516689459.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:39.819Z,1516689459.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:40.224Z,1516689460.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:40.625Z,1516689460.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:40.993Z,1516689460.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:41.421Z,1516689461.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:41.818Z,1516689461.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:42.220Z,1516689462.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:42.620Z,1516689462.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:43.009Z,1516689463.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:43.405Z,1516689463.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:43.820Z,1516689463.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:44.225Z,1516689464.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:44.620Z,1516689464.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:45.006Z,1516689465.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:45.410Z,1516689465.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:45.810Z,1516689465.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:46.214Z,1516689466.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:46.630Z,1516689466.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:47.008Z,1516689467.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:47.413Z,1516689467.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:47.819Z,1516689467.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:50.916Z,1516689470.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:51.065Z,1516689471.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:51.385Z,1516689471.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:51.772Z,1516689471.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:51.786Z,1516689471.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:52.170Z,1516689472.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:52.185Z,1516689472.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:52.561Z,1516689472.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:52.588Z,1516689472.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:52.970Z,1516689472.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:53.001Z,1516689473.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:53.380Z,1516689473.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:53.394Z,1516689473.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:53.776Z,1516689473.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:53.790Z,1516689473.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:54.162Z,1516689474.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:54.193Z,1516689474.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:54.556Z,1516689474.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:54.582Z,1516689474.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:54.958Z,1516689474.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:54.993Z,1516689474.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:55.367Z,1516689475.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:55.394Z,1516689475.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:55.762Z,1516689475.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:55.792Z,1516689475.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:56.172Z,1516689476.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:56.198Z,1516689476.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:56.572Z,1516689476.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:56.611Z,1516689476.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:56.972Z,1516689476.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:56.998Z,1516689476.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:57.358Z,1516689477.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:57.393Z,1516689477.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:57.758Z,1516689477.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:57.777Z,1516689477.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:58.166Z,1516689478.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:58.201Z,1516689478.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:58.562Z,1516689478.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:58.577Z,1516689478.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:58.980Z,1516689478.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:59.006Z,1516689479.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:59.380Z,1516689479.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:59.404Z,1516689479.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:37:59.780Z,1516689479.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:37:59.804Z,1516689479.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:00.167Z,1516689480.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:00.209Z,1516689480.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:00.568Z,1516689480.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:00.582Z,1516689480.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:00.969Z,1516689480.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:00.983Z,1516689480.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:01.364Z,1516689481.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:01.386Z,1516689481.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:01.766Z,1516689481.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:01.785Z,1516689481.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:02.168Z,1516689482.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:02.182Z,1516689482.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:02.572Z,1516689482.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:02.586Z,1516689482.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:02.968Z,1516689482.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:02.982Z,1516689482.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:03.367Z,1516689483.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:03.381Z,1516689483.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:03.767Z,1516689483.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:03.781Z,1516689483.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:04.165Z,1516689484.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:04.191Z,1516689484.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:04.566Z,1516689484.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:04.592Z,1516689484.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:04.977Z,1516689484.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:04.997Z,1516689484.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:05.376Z,1516689485.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:05.390Z,1516689485.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:05.776Z,1516689485.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:05.790Z,1516689485.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:06.168Z,1516689486.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:06.183Z,1516689486.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:06.562Z,1516689486.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:06.584Z,1516689486.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:06.971Z,1516689486.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:06.986Z,1516689486.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:07.369Z,1516689487.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:07.384Z,1516689487.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:07.762Z,1516689487.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:07.793Z,1516689487.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:08.181Z,1516689488.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:08.198Z,1516689488.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:08.581Z,1516689488.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:08.596Z,1516689488.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:08.973Z,1516689488.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:08.996Z,1516689488.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:09.358Z,1516689489.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:09.395Z,1516689489.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:09.758Z,1516689489.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:09.793Z,1516689489.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:10.159Z,1516689490.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:10.195Z,1516689490.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:10.561Z,1516689490.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:10.589Z,1516689490.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:10.968Z,1516689490.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:11.004Z,1516689491.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:11.385Z,1516689491.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:11.400Z,1516689491.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:11.768Z,1516689491.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:11.795Z,1516689491.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:12.158Z,1516689492.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:12.195Z,1516689492.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:12.562Z,1516689492.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:12.592Z,1516689492.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:12.958Z,1516689492.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:12.993Z,1516689492.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:13.358Z,1516689493.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:13.372Z,1516689493.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:13.763Z,1516689493.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:13.777Z,1516689493.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:14.180Z,1516689494.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:14.204Z,1516689494.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:14.580Z,1516689494.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:14.606Z,1516689494.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:14.972Z,1516689494.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:14.986Z,1516689494.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:15.363Z,1516689495.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:15.385Z,1516689495.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:15.766Z,1516689495.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:15.780Z,1516689495.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:16.163Z,1516689496.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:16.181Z,1516689496.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:16.566Z,1516689496.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:16.580Z,1516689496.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:16.972Z,1516689496.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:16.986Z,1516689496.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:17.372Z,1516689497.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:17.386Z,1516689497.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:17.772Z,1516689497.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:17.787Z,1516689497.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:18.167Z,1516689498.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:18.181Z,1516689498.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:18.566Z,1516689498.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:18.580Z,1516689498.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:18.966Z,1516689498.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:18.980Z,1516689498.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:19.368Z,1516689499.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:19.381Z,1516689499.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:19.766Z,1516689499.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:19.780Z,1516689499.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:20.171Z,1516689500.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:20.186Z,1516689500.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:20.572Z,1516689500.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:20.586Z,1516689500.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:20.972Z,1516689500.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:20.987Z,1516689500.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:21.366Z,1516689501.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:21.385Z,1516689501.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:21.767Z,1516689501.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:21.781Z,1516689501.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:22.164Z,1516689502.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:22.183Z,1516689502.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:22.561Z,1516689502.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:22.580Z,1516689502.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:22.976Z,1516689502.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:22.990Z,1516689502.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:23.375Z,1516689503.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:23.389Z,1516689503.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:23.776Z,1516689503.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:23.790Z,1516689503.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:24.167Z,1516689504.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:24.181Z,1516689504.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:24.566Z,1516689504.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:24.580Z,1516689504.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:24.960Z,1516689504.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:24.978Z,1516689504.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:25.367Z,1516689505.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:25.381Z,1516689505.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:25.774Z,1516689505.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:25.793Z,1516689505.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:26.176Z,1516689506.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:26.190Z,1516689506.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:26.579Z,1516689506.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:26.593Z,1516689506.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:26.976Z,1516689506.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:26.990Z,1516689506.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:27.366Z,1516689507.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:27.381Z,1516689507.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:27.767Z,1516689507.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:27.789Z,1516689507.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:28.171Z,1516689508.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:28.185Z,1516689508.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:28.561Z,1516689508.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:28.583Z,1516689508.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:28.977Z,1516689508.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:28.991Z,1516689508.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:29.379Z,1516689509.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:29.393Z,1516689509.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:29.776Z,1516689509.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:29.790Z,1516689509.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:30.167Z,1516689510.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:30.181Z,1516689510.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:30.561Z,1516689510.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:30.584Z,1516689510.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:30.960Z,1516689510.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:30.992Z,1516689510.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:31.368Z,1516689511.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:31.382Z,1516689511.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:31.761Z,1516689511.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:31.784Z,1516689511.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:32.175Z,1516689512.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:32.189Z,1516689512.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:32.579Z,1516689512.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:32.593Z,1516689512.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:32.976Z,1516689512.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:32.990Z,1516689512.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:33.366Z,1516689513.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:33.385Z,1516689513.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:33.767Z,1516689513.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:33.788Z,1516689513.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:34.166Z,1516689514.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:34.184Z,1516689514.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:34.566Z,1516689514.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:34.585Z,1516689514.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:34.977Z,1516689514.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:34.991Z,1516689514.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:35.379Z,1516689515.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:35.401Z,1516689515.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:35.779Z,1516689515.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:35.794Z,1516689515.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:36.167Z,1516689516.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:36.181Z,1516689516.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:36.562Z,1516689516.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:36.583Z,1516689516.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:36.961Z,1516689516.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:36.984Z,1516689516.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:37.367Z,1516689517.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:37.381Z,1516689517.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:37.766Z,1516689517.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:37.785Z,1516689517.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:38.175Z,1516689518.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:38.189Z,1516689518.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:38.579Z,1516689518.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:38.601Z,1516689518.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:38.980Z,1516689518.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:38.994Z,1516689518.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:39.366Z,1516689519.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:39.385Z,1516689519.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:39.768Z,1516689519.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:39.785Z,1516689519.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:40.172Z,1516689520.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:40.186Z,1516689520.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:40.561Z,1516689520.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:40.584Z,1516689520.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:40.978Z,1516689520.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:40.992Z,1516689520.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:41.380Z,1516689521.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:41.394Z,1516689521.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:41.780Z,1516689521.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:41.794Z,1516689521.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:42.169Z,1516689522.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:42.188Z,1516689522.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:42.560Z,1516689522.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:42.583Z,1516689522.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:42.960Z,1516689522.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:42.993Z,1516689522.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:43.370Z,1516689523.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:43.383Z,1516689523.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:43.762Z,1516689523.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:43.785Z,1516689523.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:44.176Z,1516689524.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:44.194Z,1516689524.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:44.582Z,1516689524.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:44.599Z,1516689524.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:44.968Z,1516689524.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:45.001Z,1516689525.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:45.362Z,1516689525.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:45.376Z,1516689525.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:45.764Z,1516689525.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:45.778Z,1516689525.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:46.167Z,1516689526.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:46.181Z,1516689526.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:46.185Z,1516689526.185 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:33:45.9Z 2018-01-23T06:38:46.186Z,1516689526.186 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:38:46.186Z,1516689526.186 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:38:46.566Z,1516689526.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:46.580Z,1516689526.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:47.103Z,1516689527.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:47.117Z,1516689527.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:47.373Z,1516689527.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:47.387Z,1516689527.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:50.472Z,1516689530.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:50.492Z,1516689530.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:50.567Z,1516689530.567 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0080.lzma 2018-01-23T06:38:50.589Z,1516689530.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:50.621Z,1516689530.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:50.961Z,1516689530.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:50.979Z,1516689530.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:51.337Z,1516689531.337 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0080.lzma.bak 2018-01-23T06:38:51.337Z,1516689531.337 [DataOverHttps](INFO): SBD MOMSN=7755147 2018-01-23T06:38:51.380Z,1516689531.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:51.411Z,1516689531.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:52.085Z,1516689532.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:52.117Z,1516689532.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:52.225Z,1516689532.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:52.264Z,1516689532.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:55.272Z,1516689535.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:55.286Z,1516689535.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:55.396Z,1516689535.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:55.437Z,1516689535.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:55.764Z,1516689535.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:55.783Z,1516689535.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:56.172Z,1516689536.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:56.186Z,1516689536.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:56.562Z,1516689536.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:56.584Z,1516689536.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:38:56.975Z,1516689536.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:38:56.990Z,1516689536.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:00.075Z,1516689540.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:00.089Z,1516689540.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:00.163Z,1516689540.163 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0081.lzma 2018-01-23T06:39:00.196Z,1516689540.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:00.237Z,1516689540.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:00.572Z,1516689540.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:00.591Z,1516689540.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:00.945Z,1516689540.945 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0081.lzma.bak 2018-01-23T06:39:00.945Z,1516689540.945 [DataOverHttps](INFO): SBD MOMSN=7755149 2018-01-23T06:39:00.985Z,1516689540.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:00.999Z,1516689540.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:01.598Z,1516689541.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:01.629Z,1516689541.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:01.632Z,1516689541.632 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:39:01.632Z,1516689541.632 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:39:01.632Z,1516689541.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:39:01.777Z,1516689541.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:01.792Z,1516689541.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:05.021Z,1516689545.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:05.035Z,1516689545.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:05.149Z,1516689545.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:05.193Z,1516689545.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:05.496Z,1516689545.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:05.525Z,1516689545.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:05.890Z,1516689545.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:05.928Z,1516689545.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:06.286Z,1516689546.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:06.301Z,1516689546.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:06.682Z,1516689546.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:06.696Z,1516689546.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:07.091Z,1516689547.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:07.105Z,1516689547.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:07.492Z,1516689547.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:07.506Z,1516689547.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:07.888Z,1516689547.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:07.903Z,1516689547.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:08.285Z,1516689548.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:08.305Z,1516689548.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:08.682Z,1516689548.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:08.696Z,1516689548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:09.085Z,1516689549.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:09.141Z,1516689549.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:09.486Z,1516689549.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:09.505Z,1516689549.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:09.886Z,1516689549.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:09.901Z,1516689549.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:10.301Z,1516689550.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:10.315Z,1516689550.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:10.701Z,1516689550.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:10.715Z,1516689550.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:11.096Z,1516689551.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:11.117Z,1516689551.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:11.477Z,1516689551.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:11.513Z,1516689551.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:11.877Z,1516689551.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:11.919Z,1516689551.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:12.278Z,1516689552.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:12.309Z,1516689552.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:12.679Z,1516689552.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:12.693Z,1516689552.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:13.096Z,1516689553.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:13.111Z,1516689553.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:13.499Z,1516689553.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:13.513Z,1516689553.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:13.896Z,1516689553.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:13.916Z,1516689553.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:14.277Z,1516689554.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:14.303Z,1516689554.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:14.675Z,1516689554.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:14.709Z,1516689554.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:15.077Z,1516689555.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:15.109Z,1516689555.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:15.478Z,1516689555.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:15.513Z,1516689555.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:15.877Z,1516689555.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:15.909Z,1516689555.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:16.296Z,1516689556.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:16.310Z,1516689556.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:16.700Z,1516689556.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:16.714Z,1516689556.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:17.092Z,1516689557.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:17.119Z,1516689557.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:17.481Z,1516689557.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:17.506Z,1516689557.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:17.878Z,1516689557.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:17.917Z,1516689557.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:18.282Z,1516689558.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:18.313Z,1516689558.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:18.677Z,1516689558.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:18.713Z,1516689558.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:19.088Z,1516689559.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:19.117Z,1516689559.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:19.488Z,1516689559.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:19.521Z,1516689559.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:19.900Z,1516689559.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:19.921Z,1516689559.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:20.285Z,1516689560.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:20.317Z,1516689560.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:20.677Z,1516689560.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:20.713Z,1516689560.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:21.077Z,1516689561.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:21.109Z,1516689561.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:21.482Z,1516689561.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:21.513Z,1516689561.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:21.877Z,1516689561.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:21.897Z,1516689561.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:22.296Z,1516689562.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:22.329Z,1516689562.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:22.714Z,1516689562.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:22.729Z,1516689562.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:23.092Z,1516689563.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:23.118Z,1516689563.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:23.489Z,1516689563.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:23.530Z,1516689563.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:23.889Z,1516689563.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:23.932Z,1516689563.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:24.286Z,1516689564.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:24.300Z,1516689564.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:24.686Z,1516689564.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:24.700Z,1516689564.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:25.092Z,1516689565.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:25.107Z,1516689565.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:25.492Z,1516689565.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:25.506Z,1516689565.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:25.888Z,1516689565.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:25.902Z,1516689565.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:26.285Z,1516689566.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:26.299Z,1516689566.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:26.684Z,1516689566.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:26.698Z,1516689566.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:27.084Z,1516689567.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:27.098Z,1516689567.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:27.483Z,1516689567.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:27.505Z,1516689567.505 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:27.505Z,1516689567.505 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-01-23T06:39:27.505Z,1516689567.505 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:39:27.511Z,1516689567.511 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:27.511Z,1516689567.511 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-01-23T06:39:27.511Z,1516689567.511 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:39:27.513Z,1516689567.513 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:27.513Z,1516689567.513 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68 2018-01-23T06:39:27.513Z,1516689567.513 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:39:27.534Z,1516689567.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:39:27.534Z,1516689567.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:39:27.534Z,1516689567.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:39:27.880Z,1516689567.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:27.913Z,1516689567.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:39:27.913Z,1516689567.913 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-01-23T06:39:27.914Z,1516689567.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:39:27.914Z,1516689567.914 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-01-23T06:39:27.914Z,1516689567.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:39:27.914Z,1516689567.914 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68 2018-01-23T06:39:28.295Z,1516689568.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:28.308Z,1516689568.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:39:28.309Z,1516689568.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:39:28.309Z,1516689568.309 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:39:28.310Z,1516689568.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:39:28.310Z,1516689568.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:39:28.310Z,1516689568.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:39:28.311Z,1516689568.311 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:39:28.311Z,1516689568.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:39:28.312Z,1516689568.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:39:28.696Z,1516689568.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:28.718Z,1516689568.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:39:28.723Z,1516689568.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:29.088Z,1516689569.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:29.120Z,1516689569.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:39:29.121Z,1516689569.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:29.481Z,1516689569.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:29.512Z,1516689569.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:39:29.513Z,1516689569.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:29.885Z,1516689569.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:29.916Z,1516689569.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:39:29.917Z,1516689569.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:30.278Z,1516689570.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:30.304Z,1516689570.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:39:30.305Z,1516689570.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:30.677Z,1516689570.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:30.712Z,1516689570.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:39:30.713Z,1516689570.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:31.088Z,1516689571.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:31.118Z,1516689571.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:39:31.119Z,1516689571.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:31.500Z,1516689571.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:31.525Z,1516689571.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:39:31.526Z,1516689571.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:31.900Z,1516689571.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:31.925Z,1516689571.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:39:31.926Z,1516689571.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:32.289Z,1516689572.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:32.325Z,1516689572.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:39:32.326Z,1516689572.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:32.683Z,1516689572.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:32.697Z,1516689572.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:39:32.698Z,1516689572.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:33.089Z,1516689573.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:33.108Z,1516689573.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:39:33.109Z,1516689573.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:33.488Z,1516689573.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:33.501Z,1516689573.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:39:33.503Z,1516689573.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:33.885Z,1516689573.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:33.899Z,1516689573.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:39:33.900Z,1516689573.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:34.288Z,1516689574.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:34.302Z,1516689574.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:39:34.303Z,1516689574.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:34.700Z,1516689574.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:34.714Z,1516689574.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:39:34.723Z,1516689574.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:35.092Z,1516689575.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:35.106Z,1516689575.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:39:35.107Z,1516689575.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:35.486Z,1516689575.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:35.508Z,1516689575.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:39:35.509Z,1516689575.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:35.887Z,1516689575.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:35.901Z,1516689575.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:39:35.902Z,1516689575.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:36.284Z,1516689576.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:36.311Z,1516689576.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:39:36.312Z,1516689576.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:36.690Z,1516689576.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:36.704Z,1516689576.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:39:36.705Z,1516689576.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:37.096Z,1516689577.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:37.110Z,1516689577.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:39:37.112Z,1516689577.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:37.495Z,1516689577.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:37.509Z,1516689577.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:39:37.510Z,1516689577.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:37.900Z,1516689577.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:37.915Z,1516689577.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:39:37.916Z,1516689577.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:38.288Z,1516689578.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:38.301Z,1516689578.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:39:38.302Z,1516689578.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:38.680Z,1516689578.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:38.717Z,1516689578.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:39:38.717Z,1516689578.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:39.091Z,1516689579.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:39.105Z,1516689579.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:39:39.106Z,1516689579.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:39.479Z,1516689579.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:39.515Z,1516689579.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:39:39.516Z,1516689579.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:39.892Z,1516689579.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:39.906Z,1516689579.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:39:39.907Z,1516689579.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:40.293Z,1516689580.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:40.311Z,1516689580.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:39:40.312Z,1516689580.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:40.700Z,1516689580.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:40.764Z,1516689580.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T06:39:40.765Z,1516689580.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:41.102Z,1516689581.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:41.116Z,1516689581.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:39:41.117Z,1516689581.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:41.477Z,1516689581.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:41.509Z,1516689581.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:39:41.510Z,1516689581.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:41.877Z,1516689581.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:41.907Z,1516689581.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:39:41.908Z,1516689581.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:42.278Z,1516689582.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:42.292Z,1516689582.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:39:42.293Z,1516689582.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:42.677Z,1516689582.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:42.696Z,1516689582.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:39:42.697Z,1516689582.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:43.096Z,1516689583.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:43.125Z,1516689583.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:39:43.125Z,1516689583.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:43.500Z,1516689583.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:43.529Z,1516689583.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:39:43.530Z,1516689583.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:43.900Z,1516689583.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:43.933Z,1516689583.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:39:43.934Z,1516689583.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:44.281Z,1516689584.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:44.300Z,1516689584.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:39:44.301Z,1516689584.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:44.686Z,1516689584.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:44.700Z,1516689584.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:39:44.701Z,1516689584.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:45.082Z,1516689585.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:45.100Z,1516689585.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:39:45.101Z,1516689585.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:45.485Z,1516689585.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:45.499Z,1516689585.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:39:45.500Z,1516689585.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:45.882Z,1516689585.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:45.904Z,1516689585.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:39:45.905Z,1516689585.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:46.288Z,1516689586.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:46.302Z,1516689586.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:39:46.303Z,1516689586.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:46.692Z,1516689586.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:46.705Z,1516689586.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:39:46.706Z,1516689586.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:47.088Z,1516689587.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:47.102Z,1516689587.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:39:47.103Z,1516689587.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:47.484Z,1516689587.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:47.498Z,1516689587.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:39:47.499Z,1516689587.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:47.885Z,1516689587.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:47.899Z,1516689587.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:48.287Z,1516689588.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:48.301Z,1516689588.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:48.683Z,1516689588.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:48.701Z,1516689588.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:49.097Z,1516689589.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:49.111Z,1516689589.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:49.500Z,1516689589.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:49.514Z,1516689589.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:49.895Z,1516689589.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:49.909Z,1516689589.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:50.284Z,1516689590.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:50.311Z,1516689590.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:50.680Z,1516689590.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:50.703Z,1516689590.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:51.080Z,1516689591.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:51.102Z,1516689591.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:51.486Z,1516689591.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:51.504Z,1516689591.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:51.889Z,1516689591.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:51.903Z,1516689591.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:52.295Z,1516689592.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:52.310Z,1516689592.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:52.699Z,1516689592.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:52.713Z,1516689592.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:53.095Z,1516689593.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:53.110Z,1516689593.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:53.477Z,1516689593.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:53.509Z,1516689593.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:53.877Z,1516689593.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:53.912Z,1516689593.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:54.290Z,1516689594.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:54.304Z,1516689594.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:54.677Z,1516689594.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:54.709Z,1516689594.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:55.096Z,1516689595.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:55.110Z,1516689595.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:55.500Z,1516689595.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:55.514Z,1516689595.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:55.892Z,1516689595.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:55.910Z,1516689595.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:56.281Z,1516689596.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:56.307Z,1516689596.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:56.681Z,1516689596.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:56.706Z,1516689596.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:57.077Z,1516689597.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:57.102Z,1516689597.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:57.478Z,1516689597.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:57.513Z,1516689597.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:57.881Z,1516689597.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:57.906Z,1516689597.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:58.296Z,1516689598.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:58.310Z,1516689598.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:58.700Z,1516689598.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:58.714Z,1516689598.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:59.103Z,1516689599.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:59.117Z,1516689599.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:59.477Z,1516689599.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:59.502Z,1516689599.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:39:59.877Z,1516689599.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:39:59.905Z,1516689599.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:00.278Z,1516689600.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:00.309Z,1516689600.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:00.681Z,1516689600.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:00.706Z,1516689600.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:01.097Z,1516689601.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:01.112Z,1516689601.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:01.498Z,1516689601.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:01.517Z,1516689601.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:01.896Z,1516689601.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:01.910Z,1516689601.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:02.278Z,1516689602.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:02.310Z,1516689602.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:05.395Z,1516689605.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:05.410Z,1516689605.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:05.515Z,1516689605.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:05.560Z,1516689605.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:05.868Z,1516689605.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:05.882Z,1516689605.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:06.280Z,1516689606.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:06.304Z,1516689606.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:06.664Z,1516689606.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:06.678Z,1516689606.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:07.059Z,1516689607.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:07.085Z,1516689607.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:07.468Z,1516689607.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:07.482Z,1516689607.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:07.858Z,1516689607.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:07.884Z,1516689607.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:08.276Z,1516689608.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:08.297Z,1516689608.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:08.678Z,1516689608.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:08.692Z,1516689608.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:09.076Z,1516689609.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:09.090Z,1516689609.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:09.454Z,1516689609.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:09.490Z,1516689609.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:09.854Z,1516689609.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:09.893Z,1516689609.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:10.269Z,1516689610.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:10.283Z,1516689610.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:10.654Z,1516689610.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:10.684Z,1516689610.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:11.068Z,1516689611.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:11.101Z,1516689611.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:11.476Z,1516689611.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:11.491Z,1516689611.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:11.869Z,1516689611.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:11.891Z,1516689611.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:12.253Z,1516689612.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:12.291Z,1516689612.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:12.653Z,1516689612.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:12.689Z,1516689612.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:13.057Z,1516689613.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:13.083Z,1516689613.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:13.454Z,1516689613.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:13.489Z,1516689613.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:13.857Z,1516689613.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:13.889Z,1516689613.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:14.281Z,1516689614.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:14.296Z,1516689614.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:14.678Z,1516689614.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:14.697Z,1516689614.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:15.076Z,1516689615.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:15.094Z,1516689615.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:15.454Z,1516689615.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:15.490Z,1516689615.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:15.855Z,1516689615.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:15.891Z,1516689615.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:16.256Z,1516689616.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:16.282Z,1516689616.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:16.654Z,1516689616.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:16.689Z,1516689616.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:17.065Z,1516689617.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:17.099Z,1516689617.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:17.469Z,1516689617.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:17.505Z,1516689617.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:17.865Z,1516689617.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:17.896Z,1516689617.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:18.261Z,1516689618.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:18.276Z,1516689618.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:18.661Z,1516689618.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:18.677Z,1516689618.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:19.061Z,1516689619.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:19.082Z,1516689619.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:19.461Z,1516689619.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:19.475Z,1516689619.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:19.858Z,1516689619.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:19.877Z,1516689619.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:20.268Z,1516689620.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:20.282Z,1516689620.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:20.668Z,1516689620.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:20.681Z,1516689620.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:21.064Z,1516689621.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:21.078Z,1516689621.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:21.460Z,1516689621.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:21.474Z,1516689621.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:21.861Z,1516689621.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:21.880Z,1516689621.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:22.260Z,1516689622.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:22.275Z,1516689622.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:22.659Z,1516689622.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:22.677Z,1516689622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:23.067Z,1516689623.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:23.081Z,1516689623.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:23.468Z,1516689623.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:23.482Z,1516689623.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:23.865Z,1516689623.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:23.885Z,1516689623.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:24.263Z,1516689624.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:24.284Z,1516689624.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:24.665Z,1516689624.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:24.684Z,1516689624.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:25.068Z,1516689625.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:25.082Z,1516689625.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:25.467Z,1516689625.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:25.481Z,1516689625.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:25.866Z,1516689625.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:25.885Z,1516689625.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:26.260Z,1516689626.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:26.278Z,1516689626.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:26.663Z,1516689626.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:26.682Z,1516689626.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:27.068Z,1516689627.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:27.083Z,1516689627.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:27.468Z,1516689627.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:27.482Z,1516689627.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:27.867Z,1516689627.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:27.888Z,1516689627.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:28.265Z,1516689628.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:28.279Z,1516689628.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:28.661Z,1516689628.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:28.675Z,1516689628.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:29.068Z,1516689629.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:29.088Z,1516689629.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:29.468Z,1516689629.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:29.482Z,1516689629.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:29.867Z,1516689629.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:29.881Z,1516689629.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:30.263Z,1516689630.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:30.276Z,1516689630.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:30.661Z,1516689630.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:30.675Z,1516689630.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:31.066Z,1516689631.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:31.085Z,1516689631.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:31.468Z,1516689631.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:31.482Z,1516689631.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:31.868Z,1516689631.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:31.882Z,1516689631.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:32.271Z,1516689632.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:32.285Z,1516689632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:32.662Z,1516689632.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:32.680Z,1516689632.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:33.069Z,1516689633.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:33.089Z,1516689633.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:33.470Z,1516689633.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:33.489Z,1516689633.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:33.872Z,1516689633.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:33.892Z,1516689633.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:34.266Z,1516689634.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:34.280Z,1516689634.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:34.656Z,1516689634.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:34.678Z,1516689634.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:35.073Z,1516689635.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:35.087Z,1516689635.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:35.476Z,1516689635.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:35.490Z,1516689635.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:35.874Z,1516689635.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:35.893Z,1516689635.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:36.267Z,1516689636.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:36.281Z,1516689636.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:36.664Z,1516689636.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:36.679Z,1516689636.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:37.076Z,1516689637.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:37.091Z,1516689637.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:37.475Z,1516689637.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:37.496Z,1516689637.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:37.875Z,1516689637.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:37.889Z,1516689637.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:38.260Z,1516689638.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:38.280Z,1516689638.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:38.666Z,1516689638.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:38.684Z,1516689638.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:39.074Z,1516689639.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:39.089Z,1516689639.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:39.475Z,1516689639.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:39.489Z,1516689639.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:39.872Z,1516689639.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:39.886Z,1516689639.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:40.270Z,1516689640.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:40.284Z,1516689640.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:40.672Z,1516689640.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:40.686Z,1516689640.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:41.072Z,1516689641.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:41.086Z,1516689641.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:41.474Z,1516689641.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:41.493Z,1516689641.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:41.875Z,1516689641.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:41.889Z,1516689641.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:42.271Z,1516689642.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:42.284Z,1516689642.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:42.670Z,1516689642.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:42.689Z,1516689642.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:43.071Z,1516689643.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:43.085Z,1516689643.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:43.475Z,1516689643.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:43.496Z,1516689643.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:43.874Z,1516689643.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:43.893Z,1516689643.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:44.270Z,1516689644.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:44.284Z,1516689644.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:44.661Z,1516689644.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:44.675Z,1516689644.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:45.072Z,1516689645.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:45.086Z,1516689645.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:45.476Z,1516689645.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:45.490Z,1516689645.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:45.876Z,1516689645.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:45.896Z,1516689645.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:46.267Z,1516689646.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:46.281Z,1516689646.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:46.659Z,1516689646.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:46.681Z,1516689646.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:47.077Z,1516689647.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:47.096Z,1516689647.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:47.472Z,1516689647.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:47.486Z,1516689647.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:47.876Z,1516689647.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:47.890Z,1516689647.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:48.267Z,1516689648.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:48.281Z,1516689648.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:48.660Z,1516689648.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:48.682Z,1516689648.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:49.080Z,1516689649.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:49.094Z,1516689649.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:49.478Z,1516689649.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:49.492Z,1516689649.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:49.875Z,1516689649.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:49.889Z,1516689649.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:50.272Z,1516689650.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:50.286Z,1516689650.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:50.665Z,1516689650.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:50.695Z,1516689650.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:51.073Z,1516689651.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:51.087Z,1516689651.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:51.472Z,1516689651.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:51.504Z,1516689651.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:51.880Z,1516689651.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:51.894Z,1516689651.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:52.265Z,1516689652.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:52.280Z,1516689652.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:52.674Z,1516689652.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:52.689Z,1516689652.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:53.076Z,1516689653.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:53.091Z,1516689653.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:53.467Z,1516689653.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:53.494Z,1516689653.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:53.881Z,1516689653.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:53.896Z,1516689653.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:54.276Z,1516689654.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:54.290Z,1516689654.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:54.656Z,1516689654.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:54.688Z,1516689654.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:55.069Z,1516689655.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:55.093Z,1516689655.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:55.479Z,1516689655.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:55.492Z,1516689655.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:55.879Z,1516689655.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:55.893Z,1516689655.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:56.254Z,1516689656.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:56.295Z,1516689656.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:56.656Z,1516689656.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:56.692Z,1516689656.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:57.068Z,1516689657.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:57.104Z,1516689657.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:57.485Z,1516689657.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:57.505Z,1516689657.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:57.880Z,1516689657.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:57.895Z,1516689657.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:58.253Z,1516689658.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:58.289Z,1516689658.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:58.656Z,1516689658.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:58.689Z,1516689658.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:59.057Z,1516689659.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:59.085Z,1516689659.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:59.469Z,1516689659.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:59.497Z,1516689659.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:40:59.878Z,1516689659.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:40:59.897Z,1516689659.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:00.265Z,1516689660.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:00.300Z,1516689660.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:00.659Z,1516689660.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:00.686Z,1516689660.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:01.053Z,1516689661.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:01.096Z,1516689661.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:01.460Z,1516689661.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:01.487Z,1516689661.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:01.859Z,1516689661.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:01.887Z,1516689661.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:02.276Z,1516689662.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:02.290Z,1516689662.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:02.682Z,1516689662.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:02.707Z,1516689662.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:05.765Z,1516689665.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:05.801Z,1516689665.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:05.899Z,1516689665.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:05.921Z,1516689665.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:06.265Z,1516689666.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:06.285Z,1516689666.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:06.669Z,1516689666.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:06.683Z,1516689666.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:07.067Z,1516689667.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:07.081Z,1516689667.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:07.468Z,1516689667.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:07.508Z,1516689667.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:07.870Z,1516689667.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:07.878Z,1516689667.878 [PNI_TCM](ERROR): CRC does not match. Expected:0x40275 got:0x5401 2018-01-23T06:41:07.916Z,1516689667.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:08.269Z,1516689668.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:08.283Z,1516689668.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:08.669Z,1516689668.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:08.683Z,1516689668.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:09.065Z,1516689669.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:09.104Z,1516689669.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:09.464Z,1516689669.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:09.482Z,1516689669.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:09.867Z,1516689669.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:09.888Z,1516689669.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:10.269Z,1516689670.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:10.289Z,1516689670.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:10.672Z,1516689670.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:10.712Z,1516689670.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:11.068Z,1516689671.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:11.078Z,1516689671.078 [PNI_TCM](ERROR): CRC does not match. Expected:0x64513 got:0x3864 2018-01-23T06:41:11.110Z,1516689671.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:11.471Z,1516689671.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:11.486Z,1516689671.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:11.865Z,1516689671.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:11.887Z,1516689671.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:12.266Z,1516689672.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:12.296Z,1516689672.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:12.659Z,1516689672.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:12.685Z,1516689672.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:13.066Z,1516689673.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:13.082Z,1516689673.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:13.478Z,1516689673.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:13.492Z,1516689673.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:13.874Z,1516689673.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:13.916Z,1516689673.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:14.276Z,1516689674.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:14.292Z,1516689674.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:14.661Z,1516689674.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:14.697Z,1516689674.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:15.061Z,1516689675.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:15.088Z,1516689675.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:15.458Z,1516689675.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:15.498Z,1516689675.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:15.857Z,1516689675.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:15.887Z,1516689675.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:16.275Z,1516689676.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:16.298Z,1516689676.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:16.677Z,1516689676.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:16.699Z,1516689676.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:17.072Z,1516689677.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:17.105Z,1516689677.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:17.455Z,1516689677.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:17.478Z,1516689677.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:17.857Z,1516689677.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:17.889Z,1516689677.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:18.262Z,1516689678.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:18.290Z,1516689678.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:18.662Z,1516689678.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:18.689Z,1516689678.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:19.057Z,1516689679.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:19.096Z,1516689679.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:19.468Z,1516689679.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:19.508Z,1516689679.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:19.882Z,1516689679.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:19.901Z,1516689679.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:20.268Z,1516689680.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:20.309Z,1516689680.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:20.661Z,1516689680.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:20.697Z,1516689680.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:21.056Z,1516689681.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:21.097Z,1516689681.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:21.462Z,1516689681.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:21.496Z,1516689681.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:21.857Z,1516689681.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:21.898Z,1516689681.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:22.272Z,1516689682.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:22.303Z,1516689682.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:22.672Z,1516689682.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:22.707Z,1516689682.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:23.069Z,1516689683.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:23.102Z,1516689683.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:23.457Z,1516689683.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:23.503Z,1516689683.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:23.857Z,1516689683.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:23.877Z,1516689683.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:24.265Z,1516689684.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:24.302Z,1516689684.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:24.664Z,1516689684.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:24.682Z,1516689684.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:25.063Z,1516689685.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:25.081Z,1516689685.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:25.472Z,1516689685.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:25.486Z,1516689685.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:25.872Z,1516689685.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:25.891Z,1516689685.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:26.271Z,1516689686.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:26.289Z,1516689686.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:26.666Z,1516689686.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:26.685Z,1516689686.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:27.064Z,1516689687.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:27.087Z,1516689687.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:27.471Z,1516689687.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:27.487Z,1516689687.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:27.861Z,1516689687.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:27.895Z,1516689687.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:28.278Z,1516689688.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:28.297Z,1516689688.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:28.680Z,1516689688.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:28.694Z,1516689688.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:29.081Z,1516689689.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:29.099Z,1516689689.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:29.460Z,1516689689.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:29.494Z,1516689689.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:29.870Z,1516689689.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:29.885Z,1516689689.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:30.257Z,1516689690.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:30.289Z,1516689690.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:30.659Z,1516689690.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:30.695Z,1516689690.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:31.062Z,1516689691.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:31.093Z,1516689691.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:31.472Z,1516689691.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:31.497Z,1516689691.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:31.879Z,1516689691.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:31.913Z,1516689691.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:32.277Z,1516689692.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:32.294Z,1516689692.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:32.658Z,1516689692.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:32.705Z,1516689692.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:33.062Z,1516689693.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:33.098Z,1516689693.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:33.458Z,1516689693.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:33.489Z,1516689693.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:33.857Z,1516689693.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:33.894Z,1516689693.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:34.278Z,1516689694.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:34.314Z,1516689694.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:34.676Z,1516689694.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:34.725Z,1516689694.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:35.077Z,1516689695.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:35.116Z,1516689695.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:35.465Z,1516689695.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:35.481Z,1516689695.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:35.869Z,1516689695.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:35.884Z,1516689695.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:36.262Z,1516689696.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:36.289Z,1516689696.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:36.665Z,1516689696.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:36.679Z,1516689696.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:37.064Z,1516689697.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:37.078Z,1516689697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:37.468Z,1516689697.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:37.482Z,1516689697.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:37.872Z,1516689697.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:37.886Z,1516689697.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:38.270Z,1516689698.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:38.284Z,1516689698.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:38.666Z,1516689698.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:38.680Z,1516689698.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:39.065Z,1516689699.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:39.079Z,1516689699.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:39.465Z,1516689699.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:39.480Z,1516689699.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:39.860Z,1516689699.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:39.893Z,1516689699.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:40.275Z,1516689700.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:40.297Z,1516689700.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:40.676Z,1516689700.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:40.690Z,1516689700.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:41.076Z,1516689701.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:41.090Z,1516689701.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:41.460Z,1516689701.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:41.493Z,1516689701.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:41.865Z,1516689701.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:41.879Z,1516689701.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:42.260Z,1516689702.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:42.292Z,1516689702.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:42.670Z,1516689702.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:42.684Z,1516689702.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:43.065Z,1516689703.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:43.080Z,1516689703.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:43.475Z,1516689703.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:43.489Z,1516689703.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:43.879Z,1516689703.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:43.893Z,1516689703.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:44.274Z,1516689704.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:44.292Z,1516689704.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:44.657Z,1516689704.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:44.693Z,1516689704.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:45.061Z,1516689705.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:45.087Z,1516689705.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:45.458Z,1516689705.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:45.489Z,1516689705.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:45.857Z,1516689705.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:45.893Z,1516689705.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:46.279Z,1516689706.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:46.293Z,1516689706.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:46.683Z,1516689706.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:46.698Z,1516689706.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:47.076Z,1516689707.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:47.094Z,1516689707.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:47.457Z,1516689707.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:47.489Z,1516689707.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:47.857Z,1516689707.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:47.887Z,1516689707.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:48.257Z,1516689708.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:48.287Z,1516689708.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:48.658Z,1516689708.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:48.672Z,1516689708.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:49.057Z,1516689709.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:49.071Z,1516689709.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:49.480Z,1516689709.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:49.513Z,1516689709.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:49.876Z,1516689709.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:49.902Z,1516689709.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:50.271Z,1516689710.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:50.301Z,1516689710.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:50.665Z,1516689710.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:50.685Z,1516689710.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:51.066Z,1516689711.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:51.081Z,1516689711.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:51.464Z,1516689711.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:51.479Z,1516689711.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:51.863Z,1516689711.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:51.881Z,1516689711.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:52.273Z,1516689712.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:52.293Z,1516689712.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:52.674Z,1516689712.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:52.688Z,1516689712.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:53.075Z,1516689713.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:53.090Z,1516689713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:53.460Z,1516689713.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:53.483Z,1516689713.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:53.870Z,1516689713.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:53.885Z,1516689713.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:54.261Z,1516689714.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:54.285Z,1516689714.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:54.658Z,1516689714.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:54.685Z,1516689714.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:55.057Z,1516689715.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:55.088Z,1516689715.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:55.472Z,1516689715.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:55.494Z,1516689715.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:55.880Z,1516689715.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:55.894Z,1516689715.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:56.275Z,1516689716.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:56.289Z,1516689716.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:56.657Z,1516689716.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:56.692Z,1516689716.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:57.057Z,1516689717.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:57.093Z,1516689717.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:57.461Z,1516689717.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:57.487Z,1516689717.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:57.857Z,1516689717.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:57.883Z,1516689717.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:58.272Z,1516689718.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:58.303Z,1516689718.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:58.679Z,1516689718.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:58.693Z,1516689718.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:59.072Z,1516689719.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:59.102Z,1516689719.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:59.457Z,1516689719.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:59.483Z,1516689719.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:41:59.857Z,1516689719.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:41:59.889Z,1516689719.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:00.257Z,1516689720.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:00.293Z,1516689720.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:00.662Z,1516689720.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:00.688Z,1516689720.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:01.057Z,1516689721.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:01.089Z,1516689721.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:01.476Z,1516689721.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:01.494Z,1516689721.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:01.879Z,1516689721.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:01.905Z,1516689721.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:02.279Z,1516689722.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:02.293Z,1516689722.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:02.657Z,1516689722.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:02.693Z,1516689722.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:03.062Z,1516689723.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:03.093Z,1516689723.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:06.185Z,1516689726.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:06.201Z,1516689726.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:06.310Z,1516689726.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:06.356Z,1516689726.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:06.664Z,1516689726.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:06.694Z,1516689726.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:07.072Z,1516689727.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:07.095Z,1516689727.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:07.464Z,1516689727.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:07.490Z,1516689727.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:07.852Z,1516689727.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:07.873Z,1516689727.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:08.256Z,1516689728.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:08.269Z,1516689728.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:08.653Z,1516689728.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:08.672Z,1516689728.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:09.055Z,1516689729.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:09.069Z,1516689729.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:09.456Z,1516689729.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:09.471Z,1516689729.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:09.861Z,1516689729.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:09.897Z,1516689729.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:10.269Z,1516689730.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:10.299Z,1516689730.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:10.656Z,1516689730.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:10.670Z,1516689730.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:11.052Z,1516689731.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:11.072Z,1516689731.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:11.451Z,1516689731.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:11.473Z,1516689731.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:11.855Z,1516689731.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:11.876Z,1516689731.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:12.261Z,1516689732.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:12.280Z,1516689732.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:12.668Z,1516689732.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:12.689Z,1516689732.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:13.065Z,1516689733.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:13.080Z,1516689733.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:13.445Z,1516689733.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:13.477Z,1516689733.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:13.845Z,1516689733.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:13.877Z,1516689733.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:14.245Z,1516689734.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:14.273Z,1516689734.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:14.646Z,1516689734.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:14.672Z,1516689734.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:15.045Z,1516689735.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:15.081Z,1516689735.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:15.464Z,1516689735.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:15.478Z,1516689735.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:15.869Z,1516689735.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:15.883Z,1516689735.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:16.264Z,1516689736.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:16.278Z,1516689736.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:16.647Z,1516689736.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:16.682Z,1516689736.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:17.045Z,1516689737.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:17.081Z,1516689737.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:17.445Z,1516689737.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:17.477Z,1516689737.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:17.845Z,1516689737.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:17.877Z,1516689737.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:18.264Z,1516689738.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:18.278Z,1516689738.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:18.667Z,1516689738.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:18.685Z,1516689738.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:19.069Z,1516689739.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:19.083Z,1516689739.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:19.443Z,1516689739.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:19.465Z,1516689739.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:19.845Z,1516689739.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:19.881Z,1516689739.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:20.245Z,1516689740.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:20.283Z,1516689740.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:20.646Z,1516689740.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:20.661Z,1516689740.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:21.045Z,1516689741.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:21.065Z,1516689741.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:21.464Z,1516689741.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:21.491Z,1516689741.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:21.868Z,1516689741.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:21.893Z,1516689741.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:22.264Z,1516689742.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:22.288Z,1516689742.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:22.654Z,1516689742.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:22.667Z,1516689742.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:23.051Z,1516689743.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:23.065Z,1516689743.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:23.451Z,1516689743.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:23.465Z,1516689743.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:23.853Z,1516689743.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:23.867Z,1516689743.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:24.256Z,1516689744.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:24.271Z,1516689744.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:24.664Z,1516689744.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:24.678Z,1516689744.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:25.068Z,1516689745.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:25.082Z,1516689745.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:25.451Z,1516689745.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:25.465Z,1516689745.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:25.851Z,1516689745.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:25.873Z,1516689745.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:26.254Z,1516689746.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:26.268Z,1516689746.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:26.650Z,1516689746.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:26.671Z,1516689746.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:27.053Z,1516689747.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:27.067Z,1516689747.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:27.428Z,1516689747.428 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T06:42:27.428Z,1516689747.428 [NAL9602] Data Fault, FailCount= 4 2018-01-23T06:42:27.428Z,1516689747.428 [NAL9602](ERROR): Data Fault 2018-01-23T06:42:27.454Z,1516689747.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:27.492Z,1516689747.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:27.505Z,1516689747.505 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T06:42:27.828Z,1516689747.828 [NAL9602](INFO): Powering down 2018-01-23T06:42:27.860Z,1516689747.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:27.874Z,1516689747.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:28.251Z,1516689748.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:28.270Z,1516689748.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:28.653Z,1516689748.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:28.667Z,1516689748.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:28.667Z,1516689748.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-01-23T06:42:28.667Z,1516689748.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:42:28.669Z,1516689748.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:28.669Z,1516689748.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-01-23T06:42:28.669Z,1516689748.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:42:28.671Z,1516689748.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:28.671Z,1516689748.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69 2018-01-23T06:42:28.671Z,1516689748.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:42:28.683Z,1516689748.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:42:28.683Z,1516689748.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:42:28.683Z,1516689748.683 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:42:28.683Z,1516689748.683 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:42:28.683Z,1516689748.683 [NAL9602] No Fault, FailCount= 4 2018-01-23T06:42:29.051Z,1516689749.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:29.080Z,1516689749.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:42:29.080Z,1516689749.080 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-01-23T06:42:29.081Z,1516689749.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:42:29.081Z,1516689749.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-01-23T06:42:29.081Z,1516689749.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:42:29.081Z,1516689749.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69 2018-01-23T06:42:29.448Z,1516689749.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:29.478Z,1516689749.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:42:29.478Z,1516689749.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:42:29.479Z,1516689749.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:42:29.479Z,1516689749.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:42:29.480Z,1516689749.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:42:29.480Z,1516689749.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:42:29.480Z,1516689749.480 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:42:29.481Z,1516689749.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:42:29.481Z,1516689749.481 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:42:29.854Z,1516689749.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:29.872Z,1516689749.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:42:29.873Z,1516689749.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:30.242Z,1516689750.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:30.264Z,1516689750.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:42:30.265Z,1516689750.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:30.645Z,1516689750.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:30.676Z,1516689750.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:42:30.677Z,1516689750.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:31.061Z,1516689751.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:31.074Z,1516689751.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:42:31.075Z,1516689751.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:31.442Z,1516689751.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:31.475Z,1516689751.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:42:31.476Z,1516689751.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:31.849Z,1516689751.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:31.874Z,1516689751.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:42:31.875Z,1516689751.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:32.245Z,1516689752.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:32.276Z,1516689752.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:42:32.277Z,1516689752.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:32.642Z,1516689752.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:32.668Z,1516689752.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:42:32.669Z,1516689752.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:33.044Z,1516689753.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:33.077Z,1516689753.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:42:33.077Z,1516689753.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:33.449Z,1516689753.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:33.481Z,1516689753.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:42:33.482Z,1516689753.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:33.849Z,1516689753.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:33.879Z,1516689753.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:42:33.880Z,1516689753.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:34.249Z,1516689754.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:34.279Z,1516689754.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:42:34.280Z,1516689754.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:34.645Z,1516689754.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:34.664Z,1516689754.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:42:34.665Z,1516689754.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:35.049Z,1516689755.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:35.063Z,1516689755.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:42:35.064Z,1516689755.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:35.448Z,1516689755.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:35.462Z,1516689755.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:42:35.463Z,1516689755.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:35.857Z,1516689755.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:35.870Z,1516689755.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:42:35.871Z,1516689755.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:36.245Z,1516689756.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:36.259Z,1516689756.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:42:36.260Z,1516689756.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:36.657Z,1516689756.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:36.692Z,1516689756.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:42:36.693Z,1516689756.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:37.052Z,1516689757.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:37.065Z,1516689757.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:42:37.066Z,1516689757.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:37.450Z,1516689757.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:37.464Z,1516689757.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:42:37.464Z,1516689757.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:37.851Z,1516689757.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:37.865Z,1516689757.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:42:37.866Z,1516689757.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:38.252Z,1516689758.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:38.265Z,1516689758.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:42:38.266Z,1516689758.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:38.650Z,1516689758.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:38.664Z,1516689758.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:42:38.665Z,1516689758.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:39.051Z,1516689759.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:39.065Z,1516689759.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:42:39.066Z,1516689759.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:39.449Z,1516689759.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:39.474Z,1516689759.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:42:39.475Z,1516689759.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:39.849Z,1516689759.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:39.871Z,1516689759.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:42:39.872Z,1516689759.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:40.251Z,1516689760.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:40.294Z,1516689760.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:42:40.295Z,1516689760.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:40.658Z,1516689760.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:40.671Z,1516689760.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:42:40.672Z,1516689760.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:41.057Z,1516689761.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:41.071Z,1516689761.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:42:41.072Z,1516689761.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:41.454Z,1516689761.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:41.468Z,1516689761.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:42:41.468Z,1516689761.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:41.853Z,1516689761.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:41.867Z,1516689761.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:42:41.868Z,1516689761.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:42.254Z,1516689762.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:42.268Z,1516689762.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:42:42.269Z,1516689762.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:42.652Z,1516689762.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:42.666Z,1516689762.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:42:42.668Z,1516689762.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:43.053Z,1516689763.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:43.066Z,1516689763.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:42:43.067Z,1516689763.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:43.483Z,1516689763.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:43.508Z,1516689763.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:42:43.509Z,1516689763.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:43.850Z,1516689763.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:43.876Z,1516689763.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:42:43.877Z,1516689763.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:44.255Z,1516689764.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:44.268Z,1516689764.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:42:44.269Z,1516689764.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:44.648Z,1516689764.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:44.670Z,1516689764.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:42:44.671Z,1516689764.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:45.049Z,1516689765.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:45.071Z,1516689765.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:42:45.072Z,1516689765.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:45.455Z,1516689765.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:45.468Z,1516689765.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:42:45.469Z,1516689765.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:45.854Z,1516689765.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:45.868Z,1516689765.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:42:45.869Z,1516689765.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:46.247Z,1516689766.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:46.273Z,1516689766.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:42:46.274Z,1516689766.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:46.673Z,1516689766.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:42:46.674Z,1516689766.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:47.068Z,1516689767.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:42:47.069Z,1516689767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:47.478Z,1516689767.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:42:47.479Z,1516689767.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:47.868Z,1516689767.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:42:47.869Z,1516689767.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:48.273Z,1516689768.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:42:48.274Z,1516689768.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:48.677Z,1516689768.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:49.076Z,1516689769.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:49.469Z,1516689769.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:49.876Z,1516689769.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:50.277Z,1516689770.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:50.669Z,1516689770.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:51.076Z,1516689771.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:51.475Z,1516689771.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:51.864Z,1516689771.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:52.258Z,1516689772.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:52.684Z,1516689772.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:53.071Z,1516689773.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:53.467Z,1516689773.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:53.865Z,1516689773.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:54.264Z,1516689774.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:54.665Z,1516689774.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:55.065Z,1516689775.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:55.464Z,1516689775.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:55.874Z,1516689775.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:56.265Z,1516689776.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:56.664Z,1516689776.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:57.065Z,1516689777.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:57.454Z,1516689777.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:57.468Z,1516689777.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:57.852Z,1516689777.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:57.866Z,1516689777.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:58.228Z,1516689778.228 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:42:58.253Z,1516689778.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:58.275Z,1516689778.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:58.653Z,1516689778.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:58.667Z,1516689778.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:59.052Z,1516689779.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:59.067Z,1516689779.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:59.452Z,1516689779.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:59.466Z,1516689779.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:42:59.847Z,1516689779.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:42:59.880Z,1516689779.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:00.250Z,1516689780.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:43:00.264Z,1516689780.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:00.647Z,1516689780.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:43:00.669Z,1516689780.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:01.066Z,1516689781.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:01.467Z,1516689781.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:01.873Z,1516689781.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:02.270Z,1516689782.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:02.664Z,1516689782.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:03.066Z,1516689783.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:03.471Z,1516689783.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:06.578Z,1516689786.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:06.709Z,1516689786.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:07.071Z,1516689787.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:07.464Z,1516689787.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:07.863Z,1516689787.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:08.271Z,1516689788.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:08.672Z,1516689788.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:09.074Z,1516689789.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:09.420Z,1516689789.420 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:43:09.475Z,1516689789.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:09.873Z,1516689789.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:10.279Z,1516689790.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:10.677Z,1516689790.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:11.081Z,1516689791.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:11.449Z,1516689791.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:11.877Z,1516689791.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:12.255Z,1516689792.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:12.657Z,1516689792.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:13.083Z,1516689793.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:13.487Z,1516689793.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:13.886Z,1516689793.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:14.259Z,1516689794.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:14.658Z,1516689794.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:15.059Z,1516689795.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:15.468Z,1516689795.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:15.859Z,1516689795.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:16.262Z,1516689796.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:16.666Z,1516689796.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:17.068Z,1516689797.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:17.459Z,1516689797.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:17.858Z,1516689797.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:18.259Z,1516689798.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:18.663Z,1516689798.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:19.069Z,1516689799.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:19.469Z,1516689799.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:19.866Z,1516689799.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:20.259Z,1516689800.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:20.661Z,1516689800.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:21.067Z,1516689801.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:21.462Z,1516689801.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:21.876Z,1516689801.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:22.273Z,1516689802.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:22.673Z,1516689802.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:23.071Z,1516689803.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:23.461Z,1516689803.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:23.869Z,1516689803.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:24.273Z,1516689804.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:24.670Z,1516689804.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:25.075Z,1516689805.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:25.480Z,1516689805.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:25.882Z,1516689805.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:26.276Z,1516689806.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:26.656Z,1516689806.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:27.061Z,1516689807.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:27.460Z,1516689807.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:27.861Z,1516689807.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:28.288Z,1516689808.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:28.677Z,1516689808.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:29.070Z,1516689809.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:29.460Z,1516689809.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:29.861Z,1516689809.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:30.260Z,1516689810.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:30.658Z,1516689810.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:31.069Z,1516689811.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:31.477Z,1516689811.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:31.873Z,1516689811.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:32.262Z,1516689812.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:32.674Z,1516689812.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:33.058Z,1516689813.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:33.462Z,1516689813.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:33.858Z,1516689813.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:34.269Z,1516689814.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:34.677Z,1516689814.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:35.073Z,1516689815.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:35.457Z,1516689815.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:35.873Z,1516689815.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:36.262Z,1516689816.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:36.669Z,1516689816.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:37.074Z,1516689817.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:37.479Z,1516689817.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:37.877Z,1516689817.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:38.251Z,1516689818.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:38.689Z,1516689818.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:39.077Z,1516689819.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:39.477Z,1516689819.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:39.879Z,1516689819.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:40.274Z,1516689820.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:40.688Z,1516689820.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:41.082Z,1516689821.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:41.450Z,1516689821.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:41.885Z,1516689821.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:42.260Z,1516689822.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:42.657Z,1516689822.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:43.066Z,1516689823.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:43.489Z,1516689823.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:43.866Z,1516689823.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:44.260Z,1516689824.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:44.665Z,1516689824.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:45.060Z,1516689825.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:45.458Z,1516689825.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:45.859Z,1516689825.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:46.262Z,1516689826.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:46.666Z,1516689826.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:47.091Z,1516689827.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:47.456Z,1516689827.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:47.860Z,1516689827.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:48.262Z,1516689828.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:48.664Z,1516689828.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:49.090Z,1516689829.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:49.466Z,1516689829.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:49.889Z,1516689829.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:50.269Z,1516689830.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:50.669Z,1516689830.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:51.059Z,1516689831.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:51.467Z,1516689831.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:51.860Z,1516689831.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:52.269Z,1516689832.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:52.666Z,1516689832.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:53.065Z,1516689833.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:53.459Z,1516689833.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:53.858Z,1516689833.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:54.264Z,1516689834.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:54.659Z,1516689834.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:55.069Z,1516689835.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:55.469Z,1516689835.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:55.873Z,1516689835.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:56.264Z,1516689836.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:56.663Z,1516689836.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:57.065Z,1516689837.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:57.462Z,1516689837.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:57.873Z,1516689837.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:58.270Z,1516689838.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:58.677Z,1516689838.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:59.070Z,1516689839.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:59.462Z,1516689839.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:43:59.863Z,1516689839.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:00.273Z,1516689840.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:00.660Z,1516689840.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:01.072Z,1516689841.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:01.470Z,1516689841.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:01.870Z,1516689841.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:01.873Z,1516689841.873 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:44:01.873Z,1516689841.873 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:44:01.873Z,1516689841.873 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:44:01.873Z,1516689841.873 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:44:02.267Z,1516689842.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:02.270Z,1516689842.270 [Default:CheckIn:D] Stopped 2018-01-23T06:44:02.270Z,1516689842.270 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:44:02.676Z,1516689842.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:02.680Z,1516689842.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.170166 min 2018-01-23T06:44:02.680Z,1516689842.680 [Default:CheckIn:E] Stopped 2018-01-23T06:44:02.680Z,1516689842.680 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:44:02.680Z,1516689842.680 [Default:CheckIn] Stopped 2018-01-23T06:44:02.680Z,1516689842.680 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:44:02.681Z,1516689842.681 [Default:CheckIn](INFO): Running loop #21 2018-01-23T06:44:02.681Z,1516689842.681 [Default:CheckIn] Running Loop=21 2018-01-23T06:44:02.681Z,1516689842.681 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:44:02.681Z,1516689842.681 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:44:03.068Z,1516689843.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:03.469Z,1516689843.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:03.873Z,1516689843.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:06.974Z,1516689846.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:07.133Z,1516689847.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:07.458Z,1516689847.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:07.868Z,1516689847.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:08.240Z,1516689848.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:08.645Z,1516689848.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:09.045Z,1516689849.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:09.442Z,1516689849.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:09.842Z,1516689849.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:10.239Z,1516689850.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:10.637Z,1516689850.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:11.038Z,1516689851.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:11.439Z,1516689851.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:11.849Z,1516689851.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:12.249Z,1516689852.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:12.645Z,1516689852.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:13.049Z,1516689853.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:13.439Z,1516689853.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:13.839Z,1516689853.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:14.241Z,1516689854.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:14.638Z,1516689854.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:15.052Z,1516689855.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:15.449Z,1516689855.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:15.846Z,1516689855.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:16.240Z,1516689856.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:16.252Z,1516689856.252 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:44:16.638Z,1516689856.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:17.040Z,1516689857.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:17.449Z,1516689857.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:17.839Z,1516689857.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:18.243Z,1516689858.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:18.671Z,1516689858.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:19.049Z,1516689859.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:19.440Z,1516689859.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:19.849Z,1516689859.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:20.241Z,1516689860.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:20.641Z,1516689860.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:21.064Z,1516689861.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:21.451Z,1516689861.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:21.852Z,1516689861.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:22.257Z,1516689862.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:22.648Z,1516689862.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:23.051Z,1516689863.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:23.459Z,1516689863.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:23.850Z,1516689863.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:24.244Z,1516689864.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:24.657Z,1516689864.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:25.060Z,1516689865.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:25.454Z,1516689865.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:25.866Z,1516689865.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:26.251Z,1516689866.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:26.642Z,1516689866.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:27.065Z,1516689867.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:27.463Z,1516689867.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:27.861Z,1516689867.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:28.253Z,1516689868.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:28.660Z,1516689868.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:29.061Z,1516689869.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:29.468Z,1516689869.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:29.862Z,1516689869.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:30.240Z,1516689870.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:30.649Z,1516689870.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:31.073Z,1516689871.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:31.446Z,1516689871.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:31.854Z,1516689871.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:32.248Z,1516689872.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:32.646Z,1516689872.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:33.053Z,1516689873.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:33.450Z,1516689873.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:33.845Z,1516689873.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:34.255Z,1516689874.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:34.647Z,1516689874.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:35.050Z,1516689875.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:35.450Z,1516689875.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:35.849Z,1516689875.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:36.249Z,1516689876.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:36.645Z,1516689876.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:37.051Z,1516689877.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:37.449Z,1516689877.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:37.851Z,1516689877.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:38.242Z,1516689878.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:38.647Z,1516689878.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:39.040Z,1516689879.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:39.055Z,1516689879.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:39.439Z,1516689879.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:39.454Z,1516689879.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:39.839Z,1516689879.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:39.854Z,1516689879.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:40.228Z,1516689880.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:40.241Z,1516689880.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:40.622Z,1516689880.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:40.657Z,1516689880.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:41.043Z,1516689881.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:41.057Z,1516689881.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:41.444Z,1516689881.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:41.458Z,1516689881.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:41.837Z,1516689881.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:41.851Z,1516689881.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:42.221Z,1516689882.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:42.258Z,1516689882.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:42.621Z,1516689882.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:42.648Z,1516689882.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:43.045Z,1516689883.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:43.059Z,1516689883.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:43.448Z,1516689883.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:43.462Z,1516689883.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:43.840Z,1516689883.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:43.854Z,1516689883.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:44.234Z,1516689884.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:44.248Z,1516689884.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:44.639Z,1516689884.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:44.653Z,1516689884.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:45.034Z,1516689885.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:45.056Z,1516689885.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:45.442Z,1516689885.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:45.457Z,1516689885.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:45.833Z,1516689885.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:45.855Z,1516689885.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:46.222Z,1516689886.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:46.255Z,1516689886.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:46.633Z,1516689886.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:46.665Z,1516689886.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:47.038Z,1516689887.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:47.053Z,1516689887.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:47.440Z,1516689887.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:47.460Z,1516689887.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:47.843Z,1516689887.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:47.858Z,1516689887.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:48.234Z,1516689888.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:48.248Z,1516689888.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:48.617Z,1516689888.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:48.655Z,1516689888.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:49.040Z,1516689889.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:49.054Z,1516689889.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:49.436Z,1516689889.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:49.456Z,1516689889.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:49.838Z,1516689889.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:49.863Z,1516689889.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:50.219Z,1516689890.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:50.246Z,1516689890.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:50.619Z,1516689890.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:50.647Z,1516689890.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:51.038Z,1516689891.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:51.052Z,1516689891.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:51.444Z,1516689891.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:51.458Z,1516689891.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:51.838Z,1516689891.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T06:44:51.852Z,1516689891.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:52.252Z,1516689892.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:52.658Z,1516689892.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:53.053Z,1516689893.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:53.457Z,1516689893.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:53.860Z,1516689893.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:54.252Z,1516689894.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:54.647Z,1516689894.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:55.046Z,1516689895.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:55.445Z,1516689895.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:55.852Z,1516689895.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:56.258Z,1516689896.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:56.657Z,1516689896.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:57.052Z,1516689897.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:57.445Z,1516689897.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:57.845Z,1516689897.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:58.251Z,1516689898.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:58.668Z,1516689898.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:59.053Z,1516689899.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:59.457Z,1516689899.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:44:59.858Z,1516689899.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:00.260Z,1516689900.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:00.645Z,1516689900.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:01.047Z,1516689901.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:01.449Z,1516689901.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:01.851Z,1516689901.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:02.261Z,1516689902.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:02.665Z,1516689902.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:03.056Z,1516689903.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:03.450Z,1516689903.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:03.846Z,1516689903.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:04.245Z,1516689904.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:07.393Z,1516689907.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:07.514Z,1516689907.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:07.866Z,1516689907.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:08.294Z,1516689908.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:08.672Z,1516689908.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:09.069Z,1516689909.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:09.468Z,1516689909.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:09.862Z,1516689909.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:10.273Z,1516689910.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:10.670Z,1516689910.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:11.089Z,1516689911.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:11.461Z,1516689911.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:11.866Z,1516689911.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:12.262Z,1516689912.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:12.677Z,1516689912.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:13.067Z,1516689913.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:13.468Z,1516689913.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:13.894Z,1516689913.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:14.274Z,1516689914.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:14.681Z,1516689914.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:15.059Z,1516689915.059 [PNI_TCM](ERROR): CRC does not match. Expected:0x9218 got:0x1857 2018-01-23T06:45:15.100Z,1516689915.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:15.464Z,1516689915.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:15.877Z,1516689915.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:16.281Z,1516689916.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:16.677Z,1516689916.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:17.073Z,1516689917.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:17.481Z,1516689917.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:17.864Z,1516689917.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:18.272Z,1516689918.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:18.667Z,1516689918.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:19.072Z,1516689919.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:19.473Z,1516689919.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:19.878Z,1516689919.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:20.285Z,1516689920.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:20.685Z,1516689920.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:21.069Z,1516689921.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:21.476Z,1516689921.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:21.872Z,1516689921.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:22.285Z,1516689922.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:22.677Z,1516689922.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:23.077Z,1516689923.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:23.485Z,1516689923.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:23.881Z,1516689923.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:24.270Z,1516689924.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:24.673Z,1516689924.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:25.070Z,1516689925.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:25.496Z,1516689925.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:25.883Z,1516689925.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:26.285Z,1516689926.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:26.678Z,1516689926.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:27.079Z,1516689927.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:27.477Z,1516689927.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:27.873Z,1516689927.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:28.277Z,1516689928.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:28.688Z,1516689928.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.081Z,1516689929.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.457Z,1516689929.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.859Z,1516689929.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.859Z,1516689929.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-01-23T06:45:29.859Z,1516689929.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:45:29.861Z,1516689929.861 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.861Z,1516689929.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-01-23T06:45:29.861Z,1516689929.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:45:29.883Z,1516689929.883 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:29.883Z,1516689929.883 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70 2018-01-23T06:45:29.883Z,1516689929.883 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:45:29.909Z,1516689929.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:45:29.910Z,1516689929.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:45:29.910Z,1516689929.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:45:30.279Z,1516689930.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:45:30.279Z,1516689930.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-01-23T06:45:30.280Z,1516689930.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:45:30.280Z,1516689930.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-01-23T06:45:30.281Z,1516689930.281 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:45:30.281Z,1516689930.281 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70 2018-01-23T06:45:30.685Z,1516689930.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:45:30.685Z,1516689930.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:45:30.686Z,1516689930.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:45:30.686Z,1516689930.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:45:30.686Z,1516689930.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:45:30.688Z,1516689930.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:45:30.688Z,1516689930.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:45:30.688Z,1516689930.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:45:30.689Z,1516689930.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:45:31.059Z,1516689931.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:45:31.060Z,1516689931.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:31.470Z,1516689931.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:45:31.471Z,1516689931.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:31.900Z,1516689931.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:45:31.901Z,1516689931.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:32.317Z,1516689932.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T06:45:32.318Z,1516689932.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:32.680Z,1516689932.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:45:32.681Z,1516689932.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:33.116Z,1516689933.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T06:45:33.117Z,1516689933.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:33.508Z,1516689933.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:45:33.509Z,1516689933.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:33.882Z,1516689933.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:45:33.888Z,1516689933.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:34.329Z,1516689934.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T06:45:34.330Z,1516689934.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:34.732Z,1516689934.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T06:45:34.733Z,1516689934.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:35.099Z,1516689935.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:45:35.100Z,1516689935.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:35.456Z,1516689935.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:45:35.457Z,1516689935.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:35.900Z,1516689935.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:45:35.901Z,1516689935.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:36.287Z,1516689936.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:45:36.288Z,1516689936.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:36.688Z,1516689936.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:45:36.690Z,1516689936.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:37.099Z,1516689937.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:45:37.100Z,1516689937.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:37.489Z,1516689937.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:45:37.490Z,1516689937.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:37.895Z,1516689937.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:45:37.896Z,1516689937.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:38.289Z,1516689938.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:45:38.290Z,1516689938.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:38.677Z,1516689938.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:45:38.678Z,1516689938.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:39.070Z,1516689939.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:45:39.076Z,1516689939.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:39.513Z,1516689939.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T06:45:39.514Z,1516689939.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:39.887Z,1516689939.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:45:39.888Z,1516689939.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:40.285Z,1516689940.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:45:40.295Z,1516689940.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:40.732Z,1516689940.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T06:45:40.733Z,1516689940.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:41.143Z,1516689941.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T06:45:41.144Z,1516689941.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:41.528Z,1516689941.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T06:45:41.529Z,1516689941.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:41.921Z,1516689941.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T06:45:41.922Z,1516689941.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:42.310Z,1516689942.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T06:45:42.319Z,1516689942.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:42.690Z,1516689942.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:45:42.695Z,1516689942.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:43.076Z,1516689943.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:45:43.076Z,1516689943.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:43.512Z,1516689943.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T06:45:43.513Z,1516689943.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:43.914Z,1516689943.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T06:45:43.919Z,1516689943.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:44.309Z,1516689944.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T06:45:44.309Z,1516689944.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:44.677Z,1516689944.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:45:44.677Z,1516689944.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:45.070Z,1516689945.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:45:45.075Z,1516689945.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:45.497Z,1516689945.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:45:45.498Z,1516689945.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:45.915Z,1516689945.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:45:45.916Z,1516689945.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:46.280Z,1516689946.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:45:46.281Z,1516689946.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:46.697Z,1516689946.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:45:46.699Z,1516689946.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:47.080Z,1516689947.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:45:47.081Z,1516689947.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:47.489Z,1516689947.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:45:47.490Z,1516689947.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:47.892Z,1516689947.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:45:47.893Z,1516689947.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:48.264Z,1516689948.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:45:48.265Z,1516689948.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:48.667Z,1516689948.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:45:48.668Z,1516689948.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:49.068Z,1516689949.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:45:49.069Z,1516689949.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:49.472Z,1516689949.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:45:49.473Z,1516689949.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:49.880Z,1516689949.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:50.270Z,1516689950.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:50.661Z,1516689950.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:51.065Z,1516689951.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:51.465Z,1516689951.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:51.867Z,1516689951.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:52.273Z,1516689952.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:52.675Z,1516689952.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:53.074Z,1516689953.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:53.473Z,1516689953.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:53.872Z,1516689953.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:54.271Z,1516689954.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:54.664Z,1516689954.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:55.081Z,1516689955.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:55.480Z,1516689955.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:55.877Z,1516689955.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:56.282Z,1516689956.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:56.651Z,1516689956.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:57.057Z,1516689957.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:57.461Z,1516689957.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:57.869Z,1516689957.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:58.291Z,1516689958.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:58.667Z,1516689958.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:59.068Z,1516689959.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:59.461Z,1516689959.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:45:59.861Z,1516689959.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:00.259Z,1516689960.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:00.661Z,1516689960.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:01.059Z,1516689961.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:01.473Z,1516689961.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:01.873Z,1516689961.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:02.273Z,1516689962.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:02.662Z,1516689962.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:03.068Z,1516689963.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:03.468Z,1516689963.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:03.865Z,1516689963.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:04.270Z,1516689964.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:07.371Z,1516689967.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:07.521Z,1516689967.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:07.873Z,1516689967.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:08.267Z,1516689968.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:08.664Z,1516689968.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:09.064Z,1516689969.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:09.473Z,1516689969.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:09.877Z,1516689969.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:10.277Z,1516689970.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:10.668Z,1516689970.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:11.066Z,1516689971.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:11.472Z,1516689971.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:11.867Z,1516689971.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:12.273Z,1516689972.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:12.678Z,1516689972.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:13.074Z,1516689973.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:13.465Z,1516689973.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:13.874Z,1516689973.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:14.270Z,1516689974.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:14.695Z,1516689974.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:15.069Z,1516689975.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:15.495Z,1516689975.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:15.893Z,1516689975.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:16.270Z,1516689976.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:16.664Z,1516689976.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:17.064Z,1516689977.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:17.464Z,1516689977.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:17.870Z,1516689977.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:18.273Z,1516689978.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:18.678Z,1516689978.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:19.076Z,1516689979.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:19.462Z,1516689979.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:19.871Z,1516689979.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:20.264Z,1516689980.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:20.665Z,1516689980.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:21.063Z,1516689981.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:21.476Z,1516689981.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:21.873Z,1516689981.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:22.270Z,1516689982.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:22.664Z,1516689982.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:23.069Z,1516689983.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:23.464Z,1516689983.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:23.864Z,1516689983.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:24.269Z,1516689984.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:24.673Z,1516689984.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:25.069Z,1516689985.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:25.462Z,1516689985.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:25.871Z,1516689985.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:26.264Z,1516689986.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:26.665Z,1516689986.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:27.063Z,1516689987.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:27.476Z,1516689987.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:27.869Z,1516689987.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:28.269Z,1516689988.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:28.664Z,1516689988.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:29.067Z,1516689989.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:29.465Z,1516689989.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:29.863Z,1516689989.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:30.269Z,1516689990.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:30.670Z,1516689990.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:31.076Z,1516689991.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:31.462Z,1516689991.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:31.869Z,1516689991.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:32.265Z,1516689992.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:32.667Z,1516689992.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:33.064Z,1516689993.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:33.470Z,1516689993.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:33.874Z,1516689993.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:34.270Z,1516689994.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:34.671Z,1516689994.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:35.068Z,1516689995.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:35.467Z,1516689995.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:35.866Z,1516689995.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:36.281Z,1516689996.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:36.681Z,1516689996.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:37.074Z,1516689997.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:37.469Z,1516689997.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:37.869Z,1516689997.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:38.265Z,1516689998.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:38.667Z,1516689998.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:39.066Z,1516689999.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:39.476Z,1516689999.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:39.874Z,1516689999.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:40.282Z,1516690000.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:40.686Z,1516690000.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:41.065Z,1516690001.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:41.472Z,1516690001.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:41.872Z,1516690001.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:42.276Z,1516690002.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:42.681Z,1516690002.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:43.076Z,1516690003.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:43.473Z,1516690003.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:43.875Z,1516690003.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:44.278Z,1516690004.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:44.678Z,1516690004.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:45.078Z,1516690005.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:45.477Z,1516690005.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:45.853Z,1516690005.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:46.277Z,1516690006.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:46.689Z,1516690006.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:47.076Z,1516690007.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:47.481Z,1516690007.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:47.859Z,1516690007.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:48.277Z,1516690008.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:48.688Z,1516690008.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:49.081Z,1516690009.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:49.480Z,1516690009.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:49.889Z,1516690009.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:50.294Z,1516690010.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:50.670Z,1516690010.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:51.093Z,1516690011.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:51.470Z,1516690011.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:51.860Z,1516690011.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:52.270Z,1516690012.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:52.695Z,1516690012.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:53.066Z,1516690013.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:53.463Z,1516690013.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:53.872Z,1516690013.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:54.273Z,1516690014.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:54.674Z,1516690014.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:55.069Z,1516690015.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:55.465Z,1516690015.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:55.863Z,1516690015.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:56.277Z,1516690016.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:56.673Z,1516690016.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:57.070Z,1516690017.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:57.464Z,1516690017.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:57.862Z,1516690017.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:58.273Z,1516690018.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:58.670Z,1516690018.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:59.070Z,1516690019.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:59.465Z,1516690019.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:46:59.864Z,1516690019.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:00.273Z,1516690020.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:00.670Z,1516690020.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:01.069Z,1516690021.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:01.465Z,1516690021.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:01.862Z,1516690021.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:02.269Z,1516690022.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:02.673Z,1516690022.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:03.073Z,1516690023.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:03.467Z,1516690023.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:03.872Z,1516690023.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:04.274Z,1516690024.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:07.417Z,1516690027.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:07.561Z,1516690027.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:07.907Z,1516690027.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:08.285Z,1516690028.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:08.685Z,1516690028.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:09.082Z,1516690029.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:09.490Z,1516690029.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:09.913Z,1516690029.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:10.290Z,1516690030.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:10.693Z,1516690030.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:11.084Z,1516690031.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:11.482Z,1516690031.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:11.885Z,1516690031.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:12.286Z,1516690032.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:12.725Z,1516690032.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:13.087Z,1516690033.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:13.492Z,1516690033.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:13.885Z,1516690033.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:14.295Z,1516690034.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:14.693Z,1516690034.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:15.094Z,1516690035.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:15.496Z,1516690035.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:15.897Z,1516690035.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:16.305Z,1516690036.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:16.699Z,1516690036.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:17.094Z,1516690037.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:17.489Z,1516690037.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:17.901Z,1516690037.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:18.305Z,1516690038.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:18.701Z,1516690038.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:19.099Z,1516690039.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:19.491Z,1516690039.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:19.901Z,1516690039.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:20.301Z,1516690040.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:20.700Z,1516690040.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:21.106Z,1516690041.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:21.498Z,1516690041.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:21.898Z,1516690041.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:22.307Z,1516690042.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:22.701Z,1516690042.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:23.104Z,1516690043.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:23.501Z,1516690043.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:23.879Z,1516690043.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:24.305Z,1516690044.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:24.718Z,1516690044.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:25.105Z,1516690045.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:25.509Z,1516690045.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:25.881Z,1516690045.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:26.290Z,1516690046.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:26.690Z,1516690046.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:27.086Z,1516690047.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:27.483Z,1516690047.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:27.885Z,1516690047.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:28.286Z,1516690048.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:28.689Z,1516690048.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:29.098Z,1516690049.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:29.493Z,1516690049.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:29.884Z,1516690049.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:30.293Z,1516690050.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:30.722Z,1516690050.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:31.088Z,1516690051.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:31.492Z,1516690051.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:31.886Z,1516690051.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:32.283Z,1516690052.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:32.697Z,1516690052.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:33.097Z,1516690053.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:33.493Z,1516690053.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:33.893Z,1516690053.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:34.283Z,1516690054.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:34.684Z,1516690054.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:35.093Z,1516690055.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:35.497Z,1516690055.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:35.893Z,1516690055.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:36.297Z,1516690056.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:36.693Z,1516690056.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:37.091Z,1516690057.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:37.493Z,1516690057.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:37.884Z,1516690057.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:38.283Z,1516690058.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:38.697Z,1516690058.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:39.094Z,1516690059.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:39.500Z,1516690059.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:39.893Z,1516690059.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:40.293Z,1516690060.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:40.686Z,1516690060.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:41.088Z,1516690061.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:41.496Z,1516690061.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:41.897Z,1516690061.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:42.297Z,1516690062.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:42.686Z,1516690062.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:43.088Z,1516690063.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:43.492Z,1516690063.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:43.886Z,1516690063.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:44.292Z,1516690064.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:44.701Z,1516690064.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:45.101Z,1516690065.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:45.504Z,1516690065.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:45.885Z,1516690065.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:46.286Z,1516690066.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:46.688Z,1516690066.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:47.093Z,1516690067.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:47.505Z,1516690067.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:47.897Z,1516690067.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:48.294Z,1516690068.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:48.686Z,1516690068.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:49.088Z,1516690069.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:49.493Z,1516690069.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:49.886Z,1516690069.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:50.292Z,1516690070.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:50.701Z,1516690070.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:51.097Z,1516690071.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:51.505Z,1516690071.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:51.885Z,1516690071.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:52.291Z,1516690072.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:52.692Z,1516690072.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:53.093Z,1516690073.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:53.494Z,1516690073.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:53.907Z,1516690073.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:54.294Z,1516690074.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:54.692Z,1516690074.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:55.094Z,1516690075.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:55.492Z,1516690075.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:55.897Z,1516690075.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:56.292Z,1516690076.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:56.701Z,1516690076.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:57.098Z,1516690077.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:57.506Z,1516690077.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:57.887Z,1516690077.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:58.292Z,1516690078.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:58.699Z,1516690078.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:59.097Z,1516690079.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:59.504Z,1516690079.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:47:59.909Z,1516690079.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:00.296Z,1516690080.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:00.686Z,1516690080.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:01.104Z,1516690081.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:01.481Z,1516690081.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:01.892Z,1516690081.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:02.294Z,1516690082.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:02.705Z,1516690082.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:03.099Z,1516690083.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:03.495Z,1516690083.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:03.896Z,1516690083.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:04.296Z,1516690084.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:07.397Z,1516690087.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:07.535Z,1516690087.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:07.870Z,1516690087.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:08.291Z,1516690088.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:08.666Z,1516690088.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:09.062Z,1516690089.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:09.463Z,1516690089.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:09.862Z,1516690089.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:10.264Z,1516690090.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:10.666Z,1516690090.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:11.094Z,1516690091.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:11.478Z,1516690091.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:11.867Z,1516690091.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:12.262Z,1516690092.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:12.672Z,1516690092.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:13.063Z,1516690093.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:13.473Z,1516690093.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:13.874Z,1516690093.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:14.269Z,1516690094.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:14.662Z,1516690094.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:15.072Z,1516690095.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:15.467Z,1516690095.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:15.868Z,1516690095.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:16.264Z,1516690096.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:16.674Z,1516690096.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:17.074Z,1516690097.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:17.473Z,1516690097.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:17.864Z,1516690097.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:18.262Z,1516690098.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:18.665Z,1516690098.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:19.068Z,1516690099.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:19.473Z,1516690099.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:19.877Z,1516690099.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:20.272Z,1516690100.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:20.664Z,1516690100.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:21.062Z,1516690101.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:21.463Z,1516690101.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:21.865Z,1516690101.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:22.262Z,1516690102.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:22.680Z,1516690102.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:23.074Z,1516690103.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:23.477Z,1516690103.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:23.867Z,1516690103.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:24.262Z,1516690104.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:24.677Z,1516690104.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:25.063Z,1516690105.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:25.477Z,1516690105.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:25.881Z,1516690105.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:26.277Z,1516690106.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:26.669Z,1516690106.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:27.071Z,1516690107.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:27.474Z,1516690107.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:27.871Z,1516690107.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:28.264Z,1516690108.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:28.674Z,1516690108.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:29.077Z,1516690109.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:29.474Z,1516690109.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:29.866Z,1516690109.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:30.271Z,1516690110.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:30.671Z,1516690110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:31.074Z,1516690111.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:31.074Z,1516690111.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-01-23T06:48:31.074Z,1516690111.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:48:31.076Z,1516690111.076 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:31.076Z,1516690111.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-01-23T06:48:31.076Z,1516690111.076 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:48:31.078Z,1516690111.078 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:31.078Z,1516690111.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71 2018-01-23T06:48:31.078Z,1516690111.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:48:31.090Z,1516690111.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:48:31.090Z,1516690111.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:48:31.090Z,1516690111.090 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:48:31.485Z,1516690111.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:48:31.485Z,1516690111.485 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-01-23T06:48:31.486Z,1516690111.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:48:31.486Z,1516690111.486 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-01-23T06:48:31.486Z,1516690111.486 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:48:31.487Z,1516690111.487 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71 2018-01-23T06:48:31.880Z,1516690111.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:48:31.880Z,1516690111.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:48:31.880Z,1516690111.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:48:31.881Z,1516690111.881 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:48:31.881Z,1516690111.881 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:48:31.882Z,1516690111.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:48:31.882Z,1516690111.882 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:48:31.882Z,1516690111.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:48:31.883Z,1516690111.883 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:48:32.280Z,1516690112.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:48:32.281Z,1516690112.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:32.676Z,1516690112.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:48:32.677Z,1516690112.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:33.072Z,1516690113.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:48:33.073Z,1516690113.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:33.473Z,1516690113.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:48:33.473Z,1516690113.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:33.871Z,1516690113.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:48:33.872Z,1516690113.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:34.269Z,1516690114.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:48:34.270Z,1516690114.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:34.686Z,1516690114.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:48:34.687Z,1516690114.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:35.079Z,1516690115.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:48:35.080Z,1516690115.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:35.476Z,1516690115.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:48:35.477Z,1516690115.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:35.873Z,1516690115.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:48:35.874Z,1516690115.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:36.262Z,1516690116.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:48:36.263Z,1516690116.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:36.673Z,1516690116.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:48:36.674Z,1516690116.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:37.056Z,1516690117.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:48:37.057Z,1516690117.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:37.488Z,1516690117.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:48:37.489Z,1516690117.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:37.886Z,1516690117.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:48:37.887Z,1516690117.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:38.288Z,1516690118.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:48:38.289Z,1516690118.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:38.656Z,1516690118.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:48:38.657Z,1516690118.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:39.070Z,1516690119.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:48:39.087Z,1516690119.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:39.462Z,1516690119.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:48:39.463Z,1516690119.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:39.864Z,1516690119.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:48:39.865Z,1516690119.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:40.263Z,1516690120.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:48:40.264Z,1516690120.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:40.700Z,1516690120.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:48:40.700Z,1516690120.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:41.069Z,1516690121.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:48:41.070Z,1516690121.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:41.469Z,1516690121.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:48:41.470Z,1516690121.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:41.872Z,1516690121.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:48:41.873Z,1516690121.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:42.261Z,1516690122.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:48:42.262Z,1516690122.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:42.664Z,1516690122.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:48:42.665Z,1516690122.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:43.062Z,1516690123.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:48:43.063Z,1516690123.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:43.466Z,1516690123.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:48:43.467Z,1516690123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:43.870Z,1516690123.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:48:43.871Z,1516690123.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:44.276Z,1516690124.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:48:44.277Z,1516690124.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:44.661Z,1516690124.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:48:44.662Z,1516690124.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:45.068Z,1516690125.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:48:45.069Z,1516690125.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:45.463Z,1516690125.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:48:45.464Z,1516690125.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:45.864Z,1516690125.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:48:45.865Z,1516690125.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:46.262Z,1516690126.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:48:46.263Z,1516690126.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:46.669Z,1516690126.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:48:46.669Z,1516690126.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:47.070Z,1516690127.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:48:47.071Z,1516690127.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:47.472Z,1516690127.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:48:47.473Z,1516690127.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:47.863Z,1516690127.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:48:47.864Z,1516690127.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:48.262Z,1516690128.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:48:48.263Z,1516690128.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:48.664Z,1516690128.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:48:48.665Z,1516690128.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:49.063Z,1516690129.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:48:49.064Z,1516690129.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:49.472Z,1516690129.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:48:49.473Z,1516690129.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:49.869Z,1516690129.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:48:49.870Z,1516690129.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:50.268Z,1516690130.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:48:50.269Z,1516690130.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:50.664Z,1516690130.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:48:50.665Z,1516690130.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:51.062Z,1516690131.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:48:51.063Z,1516690131.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:51.469Z,1516690131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:51.870Z,1516690131.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:52.273Z,1516690132.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:52.664Z,1516690132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:53.067Z,1516690133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:53.473Z,1516690133.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:53.868Z,1516690133.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:54.273Z,1516690134.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:54.664Z,1516690134.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:55.064Z,1516690135.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:55.468Z,1516690135.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:55.870Z,1516690135.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:56.269Z,1516690136.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:56.669Z,1516690136.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:57.063Z,1516690137.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:57.476Z,1516690137.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:57.874Z,1516690137.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:58.273Z,1516690138.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:58.672Z,1516690138.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:59.065Z,1516690139.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:59.473Z,1516690139.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:48:59.870Z,1516690139.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:00.273Z,1516690140.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:00.666Z,1516690140.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:01.064Z,1516690141.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:01.473Z,1516690141.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:01.898Z,1516690141.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:02.270Z,1516690142.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:02.665Z,1516690142.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:03.063Z,1516690143.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:03.066Z,1516690143.066 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:44:02.7Z 2018-01-23T06:49:03.066Z,1516690143.066 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:49:03.066Z,1516690143.066 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:49:03.482Z,1516690143.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:04.002Z,1516690144.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:04.269Z,1516690144.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:07.361Z,1516690147.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:07.435Z,1516690147.435 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0084.lzma 2018-01-23T06:49:07.480Z,1516690147.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:07.834Z,1516690147.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:08.185Z,1516690148.185 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0084.lzma.bak 2018-01-23T06:49:08.185Z,1516690148.185 [DataOverHttps](INFO): SBD MOMSN=7755159 2018-01-23T06:49:08.265Z,1516690148.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:08.873Z,1516690148.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:09.041Z,1516690149.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:12.173Z,1516690152.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:12.290Z,1516690152.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:12.671Z,1516690152.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:13.074Z,1516690153.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:13.453Z,1516690153.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:13.849Z,1516690153.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:16.990Z,1516690156.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:17.064Z,1516690157.064 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0085.lzma 2018-01-23T06:49:17.101Z,1516690157.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:17.482Z,1516690157.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:17.820Z,1516690157.820 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0085.lzma.bak 2018-01-23T06:49:17.821Z,1516690157.821 [DataOverHttps](INFO): SBD MOMSN=7755161 2018-01-23T06:49:17.895Z,1516690157.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:18.498Z,1516690158.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:18.501Z,1516690158.501 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:49:18.501Z,1516690158.501 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:49:18.501Z,1516690158.501 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:49:18.678Z,1516690158.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:21.786Z,1516690161.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:21.913Z,1516690161.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:22.262Z,1516690162.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:22.664Z,1516690162.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:23.065Z,1516690163.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:23.458Z,1516690163.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:23.855Z,1516690163.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:24.269Z,1516690164.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:24.653Z,1516690164.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x28283 got:0x33231 2018-01-23T06:49:24.692Z,1516690164.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:25.064Z,1516690165.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:25.462Z,1516690165.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:25.869Z,1516690165.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:26.255Z,1516690166.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:26.658Z,1516690166.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:27.062Z,1516690167.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:27.469Z,1516690167.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:27.855Z,1516690167.855 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17282 2018-01-23T06:49:27.889Z,1516690167.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:28.262Z,1516690168.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:28.668Z,1516690168.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:29.068Z,1516690169.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:29.458Z,1516690169.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:29.855Z,1516690169.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:30.258Z,1516690170.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:30.684Z,1516690170.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:31.057Z,1516690171.057 [PNI_TCM](ERROR): CRC does not match. Expected:0x17796 got:0x33269 2018-01-23T06:49:31.093Z,1516690171.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:31.511Z,1516690171.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:31.864Z,1516690171.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:32.265Z,1516690172.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:32.659Z,1516690172.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:33.061Z,1516690173.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:33.455Z,1516690173.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:33.885Z,1516690173.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:34.263Z,1516690174.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:34.671Z,1516690174.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:35.058Z,1516690175.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:35.473Z,1516690175.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:35.861Z,1516690175.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:36.258Z,1516690176.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:36.669Z,1516690176.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:37.090Z,1516690177.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:37.466Z,1516690177.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:37.858Z,1516690177.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:38.255Z,1516690178.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:38.672Z,1516690178.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:39.116Z,1516690179.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:39.459Z,1516690179.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:39.865Z,1516690179.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:40.282Z,1516690180.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:40.656Z,1516690180.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:41.066Z,1516690181.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:41.465Z,1516690181.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:41.863Z,1516690181.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:42.266Z,1516690182.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:42.682Z,1516690182.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:43.072Z,1516690183.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:43.473Z,1516690183.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:43.849Z,1516690183.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:44.251Z,1516690184.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:44.653Z,1516690184.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:45.053Z,1516690185.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:45.450Z,1516690185.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:45.860Z,1516690185.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:46.285Z,1516690186.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:46.688Z,1516690186.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:47.052Z,1516690187.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:47.450Z,1516690187.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:47.856Z,1516690187.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:48.251Z,1516690188.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:48.655Z,1516690188.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:49.057Z,1516690189.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:49.482Z,1516690189.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:49.855Z,1516690189.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:50.254Z,1516690190.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:50.651Z,1516690190.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:51.059Z,1516690191.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:51.454Z,1516690191.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:51.865Z,1516690191.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:52.262Z,1516690192.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:52.668Z,1516690192.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:53.065Z,1516690193.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:53.465Z,1516690193.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:53.855Z,1516690193.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:54.254Z,1516690194.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:54.673Z,1516690194.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:55.067Z,1516690195.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:55.463Z,1516690195.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:55.854Z,1516690195.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:56.252Z,1516690196.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:56.653Z,1516690196.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:57.063Z,1516690197.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:57.451Z,1516690197.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:57.862Z,1516690197.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:58.266Z,1516690198.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:58.663Z,1516690198.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:59.054Z,1516690199.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:59.462Z,1516690199.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:49:59.853Z,1516690199.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:00.258Z,1516690200.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:00.666Z,1516690200.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:01.067Z,1516690201.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:01.477Z,1516690201.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:01.857Z,1516690201.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:02.260Z,1516690202.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:02.659Z,1516690202.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:03.059Z,1516690203.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:03.462Z,1516690203.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:03.862Z,1516690203.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:04.270Z,1516690204.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:04.663Z,1516690204.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:05.061Z,1516690205.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:05.463Z,1516690205.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:05.865Z,1516690205.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:06.241Z,1516690206.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:06.665Z,1516690206.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:07.069Z,1516690207.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:07.465Z,1516690207.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:07.869Z,1516690207.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:08.247Z,1516690208.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:08.647Z,1516690208.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:09.076Z,1516690209.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:09.451Z,1516690209.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:09.858Z,1516690209.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:10.282Z,1516690210.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:10.681Z,1516690210.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:11.052Z,1516690211.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:11.451Z,1516690211.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:11.858Z,1516690211.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:12.261Z,1516690212.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:12.666Z,1516690212.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:13.056Z,1516690213.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:13.461Z,1516690213.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:13.851Z,1516690213.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:14.252Z,1516690214.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:14.650Z,1516690214.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:15.060Z,1516690215.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:15.451Z,1516690215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:15.865Z,1516690215.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:16.262Z,1516690216.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:16.668Z,1516690216.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:17.053Z,1516690217.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:17.453Z,1516690217.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:17.856Z,1516690217.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:18.253Z,1516690218.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:18.665Z,1516690218.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:19.066Z,1516690219.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:22.165Z,1516690222.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:22.298Z,1516690222.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:22.651Z,1516690222.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:23.055Z,1516690223.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:23.449Z,1516690223.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:23.854Z,1516690223.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:24.253Z,1516690224.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:24.661Z,1516690224.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:25.032Z,1516690225.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:25.434Z,1516690225.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:25.833Z,1516690225.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:26.236Z,1516690226.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:26.663Z,1516690226.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:27.062Z,1516690227.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:27.462Z,1516690227.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:27.841Z,1516690227.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:28.237Z,1516690228.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:28.634Z,1516690228.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:29.040Z,1516690229.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:29.433Z,1516690229.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:29.849Z,1516690229.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:30.243Z,1516690230.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:30.652Z,1516690230.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:31.037Z,1516690231.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:31.434Z,1516690231.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:31.836Z,1516690231.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:32.233Z,1516690232.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:32.644Z,1516690232.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:33.047Z,1516690233.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:33.442Z,1516690233.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:33.841Z,1516690233.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:34.234Z,1516690234.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:34.630Z,1516690234.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:35.033Z,1516690235.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:35.434Z,1516690235.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:35.842Z,1516690235.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:36.246Z,1516690236.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:36.642Z,1516690236.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:37.045Z,1516690237.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:37.442Z,1516690237.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:37.839Z,1516690237.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:38.239Z,1516690238.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:38.642Z,1516690238.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:39.053Z,1516690239.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:39.449Z,1516690239.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:39.835Z,1516690239.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:40.241Z,1516690240.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:40.646Z,1516690240.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:41.052Z,1516690241.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:41.443Z,1516690241.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:41.838Z,1516690241.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:42.241Z,1516690242.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:42.652Z,1516690242.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:43.045Z,1516690243.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:43.448Z,1516690243.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:43.838Z,1516690243.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:44.237Z,1516690244.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:44.641Z,1516690244.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:45.052Z,1516690245.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:45.442Z,1516690245.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:45.843Z,1516690245.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:46.229Z,1516690246.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:46.642Z,1516690246.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:47.046Z,1516690247.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:47.445Z,1516690247.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:47.840Z,1516690247.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:48.245Z,1516690248.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:48.646Z,1516690248.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:49.046Z,1516690249.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:49.448Z,1516690249.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:49.843Z,1516690249.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:50.243Z,1516690250.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:50.648Z,1516690250.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:51.049Z,1516690251.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:51.451Z,1516690251.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:51.844Z,1516690251.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:52.221Z,1516690252.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:52.645Z,1516690252.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:53.048Z,1516690253.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:53.452Z,1516690253.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:53.824Z,1516690253.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:54.227Z,1516690254.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:54.650Z,1516690254.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:55.061Z,1516690255.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:55.459Z,1516690255.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:55.832Z,1516690255.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:56.237Z,1516690256.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:56.641Z,1516690256.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:57.042Z,1516690257.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:57.463Z,1516690257.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:57.836Z,1516690257.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:58.228Z,1516690258.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:58.634Z,1516690258.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:59.045Z,1516690259.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:59.441Z,1516690259.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:50:59.833Z,1516690259.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:00.231Z,1516690260.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:00.663Z,1516690260.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:01.042Z,1516690261.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:01.437Z,1516690261.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:01.841Z,1516690261.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:02.241Z,1516690262.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:02.637Z,1516690262.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:03.042Z,1516690263.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:03.441Z,1516690263.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:03.836Z,1516690263.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:04.231Z,1516690264.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:04.637Z,1516690264.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:05.037Z,1516690265.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:05.438Z,1516690265.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:05.835Z,1516690265.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:06.233Z,1516690266.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:06.649Z,1516690266.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:07.049Z,1516690267.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:07.443Z,1516690267.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:07.837Z,1516690267.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:08.235Z,1516690268.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:08.647Z,1516690268.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:09.050Z,1516690269.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:09.457Z,1516690269.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:09.825Z,1516690269.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:10.265Z,1516690270.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:10.657Z,1516690270.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:11.058Z,1516690271.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:11.456Z,1516690271.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:11.833Z,1516690271.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:12.235Z,1516690272.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:12.655Z,1516690272.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:13.060Z,1516690273.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:13.461Z,1516690273.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:13.828Z,1516690273.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:14.237Z,1516690274.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:14.630Z,1516690274.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:15.034Z,1516690275.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:15.438Z,1516690275.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:15.834Z,1516690275.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:16.228Z,1516690276.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:16.640Z,1516690276.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:17.037Z,1516690277.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:17.428Z,1516690277.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:17.834Z,1516690277.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:18.237Z,1516690278.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:18.634Z,1516690278.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:19.032Z,1516690279.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:19.434Z,1516690279.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:22.539Z,1516690282.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:22.673Z,1516690282.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:23.026Z,1516690283.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:23.425Z,1516690283.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:23.820Z,1516690283.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:24.225Z,1516690284.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:24.630Z,1516690284.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:24.997Z,1516690284.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:25.425Z,1516690285.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:25.829Z,1516690285.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:26.226Z,1516690286.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:26.630Z,1516690286.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:27.004Z,1516690287.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:27.401Z,1516690287.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:27.807Z,1516690287.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:28.203Z,1516690288.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:28.602Z,1516690288.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:29.006Z,1516690289.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:29.409Z,1516690289.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:29.806Z,1516690289.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:30.209Z,1516690290.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:30.604Z,1516690290.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:31.013Z,1516690291.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:31.405Z,1516690291.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:31.818Z,1516690291.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:32.206Z,1516690292.206 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:32.206Z,1516690292.206 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-01-23T06:51:32.206Z,1516690292.206 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:51:32.208Z,1516690292.208 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:32.208Z,1516690292.208 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-01-23T06:51:32.208Z,1516690292.208 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:51:32.210Z,1516690292.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:32.210Z,1516690292.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72 2018-01-23T06:51:32.210Z,1516690292.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:51:32.238Z,1516690292.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:51:32.238Z,1516690292.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:51:32.238Z,1516690292.238 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:51:32.638Z,1516690292.638 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:51:32.638Z,1516690292.638 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-01-23T06:51:32.639Z,1516690292.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:51:32.639Z,1516690292.639 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-01-23T06:51:32.640Z,1516690292.640 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:51:32.640Z,1516690292.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72 2018-01-23T06:51:33.001Z,1516690293.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:51:33.002Z,1516690293.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:51:33.002Z,1516690293.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:51:33.002Z,1516690293.002 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:51:33.003Z,1516690293.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:51:33.003Z,1516690293.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:51:33.004Z,1516690293.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:51:33.004Z,1516690293.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:51:33.004Z,1516690293.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:51:33.404Z,1516690293.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:51:33.405Z,1516690293.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:33.802Z,1516690293.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:51:33.803Z,1516690293.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:34.210Z,1516690294.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:51:34.211Z,1516690294.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:34.600Z,1516690294.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:51:34.601Z,1516690294.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:35.010Z,1516690295.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:51:35.011Z,1516690295.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:35.417Z,1516690295.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:51:35.418Z,1516690295.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:35.817Z,1516690295.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:51:35.839Z,1516690295.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:36.208Z,1516690296.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:51:36.209Z,1516690296.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:36.608Z,1516690296.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:51:36.609Z,1516690296.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:37.012Z,1516690297.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:51:37.013Z,1516690297.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:37.403Z,1516690297.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:51:37.404Z,1516690297.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:37.809Z,1516690297.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:51:37.810Z,1516690297.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:38.212Z,1516690298.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:51:38.213Z,1516690298.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:38.610Z,1516690298.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:51:38.611Z,1516690298.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:39.004Z,1516690299.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:51:39.004Z,1516690299.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:39.405Z,1516690299.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:51:39.406Z,1516690299.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:39.803Z,1516690299.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:51:39.804Z,1516690299.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:40.205Z,1516690300.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:51:40.206Z,1516690300.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:40.604Z,1516690300.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:51:40.605Z,1516690300.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:41.016Z,1516690301.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:51:41.017Z,1516690301.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:41.436Z,1516690301.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:51:41.437Z,1516690301.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:41.820Z,1516690301.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:51:41.821Z,1516690301.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:42.211Z,1516690302.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:51:42.212Z,1516690302.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:42.609Z,1516690302.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:51:42.610Z,1516690302.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:43.009Z,1516690303.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:51:43.010Z,1516690303.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:43.407Z,1516690303.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:51:43.408Z,1516690303.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:43.815Z,1516690303.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:51:43.816Z,1516690303.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:44.220Z,1516690304.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:51:44.221Z,1516690304.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:44.619Z,1516690304.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:51:44.620Z,1516690304.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:45.008Z,1516690305.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:51:45.009Z,1516690305.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:45.413Z,1516690305.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:51:45.414Z,1516690305.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:45.812Z,1516690305.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:51:45.813Z,1516690305.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:46.220Z,1516690306.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:51:46.220Z,1516690306.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:46.595Z,1516690306.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:51:46.596Z,1516690306.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:47.022Z,1516690307.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:51:47.023Z,1516690307.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:47.422Z,1516690307.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:51:47.423Z,1516690307.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:47.821Z,1516690307.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:51:47.822Z,1516690307.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:48.197Z,1516690308.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:51:48.198Z,1516690308.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:48.600Z,1516690308.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:51:48.601Z,1516690308.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:49.007Z,1516690309.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:51:49.008Z,1516690309.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:49.403Z,1516690309.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:51:49.404Z,1516690309.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:49.810Z,1516690309.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:51:49.811Z,1516690309.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:50.213Z,1516690310.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:51:50.214Z,1516690310.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:50.612Z,1516690310.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:51:50.613Z,1516690310.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:51.004Z,1516690311.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:51:51.005Z,1516690311.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:51.404Z,1516690311.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:51:51.405Z,1516690311.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:51.803Z,1516690311.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:51:51.804Z,1516690311.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:52.204Z,1516690312.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T06:51:52.205Z,1516690312.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:52.602Z,1516690312.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:53.009Z,1516690313.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:53.409Z,1516690313.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:53.817Z,1516690313.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:54.207Z,1516690314.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:54.604Z,1516690314.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:55.006Z,1516690315.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:55.405Z,1516690315.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:55.814Z,1516690315.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:56.213Z,1516690316.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:56.613Z,1516690316.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:57.005Z,1516690317.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:57.405Z,1516690317.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:57.814Z,1516690317.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:58.204Z,1516690318.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:58.605Z,1516690318.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:59.013Z,1516690319.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:59.417Z,1516690319.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:51:59.814Z,1516690319.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:00.205Z,1516690320.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:00.608Z,1516690320.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:01.014Z,1516690321.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:01.402Z,1516690321.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:01.817Z,1516690321.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:02.213Z,1516690322.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:02.613Z,1516690322.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:03.012Z,1516690323.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:03.405Z,1516690323.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:03.805Z,1516690323.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:04.205Z,1516690324.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:04.605Z,1516690324.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:05.018Z,1516690325.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:05.424Z,1516690325.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:05.815Z,1516690325.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:06.212Z,1516690326.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:06.607Z,1516690326.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:07.006Z,1516690327.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:07.412Z,1516690327.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:07.817Z,1516690327.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:08.215Z,1516690328.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:08.618Z,1516690328.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:09.011Z,1516690329.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:09.409Z,1516690329.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:09.809Z,1516690329.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:10.212Z,1516690330.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:10.601Z,1516690330.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:11.021Z,1516690331.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:11.423Z,1516690331.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:11.823Z,1516690331.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:12.214Z,1516690332.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:12.621Z,1516690332.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:13.012Z,1516690333.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:13.415Z,1516690333.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:13.827Z,1516690333.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:14.219Z,1516690334.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:14.625Z,1516690334.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:15.021Z,1516690335.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:15.417Z,1516690335.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:15.801Z,1516690335.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:16.224Z,1516690336.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:16.609Z,1516690336.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:17.034Z,1516690337.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:17.414Z,1516690337.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:17.818Z,1516690337.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:18.208Z,1516690338.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:18.605Z,1516690338.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:19.012Z,1516690339.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:19.410Z,1516690339.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:19.815Z,1516690339.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:22.906Z,1516690342.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:23.050Z,1516690343.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:23.381Z,1516690343.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:23.778Z,1516690343.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:24.176Z,1516690344.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:24.574Z,1516690344.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:24.978Z,1516690344.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:25.379Z,1516690345.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:25.810Z,1516690345.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:26.183Z,1516690346.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:26.572Z,1516690346.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:26.980Z,1516690346.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:27.379Z,1516690347.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:27.783Z,1516690347.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:28.182Z,1516690348.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:28.582Z,1516690348.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:28.980Z,1516690348.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:29.372Z,1516690349.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:29.782Z,1516690349.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:30.187Z,1516690350.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:30.585Z,1516690350.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:30.973Z,1516690350.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:31.381Z,1516690351.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:31.789Z,1516690351.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:32.186Z,1516690352.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:32.586Z,1516690352.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:32.975Z,1516690352.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:33.380Z,1516690353.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:33.786Z,1516690353.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:34.186Z,1516690354.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:34.583Z,1516690354.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:34.977Z,1516690354.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:35.376Z,1516690355.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:35.786Z,1516690355.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:36.182Z,1516690356.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:36.582Z,1516690356.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:36.977Z,1516690356.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:37.384Z,1516690357.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:37.783Z,1516690357.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:38.192Z,1516690358.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:38.585Z,1516690358.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:38.982Z,1516690358.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:39.379Z,1516690359.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:39.789Z,1516690359.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:40.190Z,1516690360.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:40.596Z,1516690360.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:40.983Z,1516690360.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:41.377Z,1516690361.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:41.787Z,1516690361.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:42.185Z,1516690362.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:42.593Z,1516690362.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:42.980Z,1516690362.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:43.372Z,1516690363.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:43.789Z,1516690363.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:44.204Z,1516690364.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:44.593Z,1516690364.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:44.990Z,1516690364.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:45.392Z,1516690365.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:45.793Z,1516690365.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:46.198Z,1516690366.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:46.601Z,1516690366.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:46.990Z,1516690366.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:47.380Z,1516690367.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:47.794Z,1516690367.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:48.197Z,1516690368.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:48.598Z,1516690368.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:48.976Z,1516690368.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:49.390Z,1516690369.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:49.769Z,1516690369.769 [PNI_TCM](ERROR): CRC does not match. Expected:0x11362 got:0x25488 2018-01-23T06:52:49.808Z,1516690369.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:50.201Z,1516690370.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:50.579Z,1516690370.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:50.993Z,1516690370.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:51.367Z,1516690371.367 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T06:52:51.389Z,1516690371.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:51.781Z,1516690371.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:52.197Z,1516690372.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:52.608Z,1516690372.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:52.972Z,1516690372.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x3349 got:0x13559 2018-01-23T06:52:53.006Z,1516690373.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:53.383Z,1516690373.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:53.781Z,1516690373.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:54.189Z,1516690374.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:54.578Z,1516690374.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:54.986Z,1516690374.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:55.385Z,1516690375.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:55.806Z,1516690375.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:56.169Z,1516690376.169 [PNI_TCM](ERROR): CRC does not match. Expected:0x56748 got:0x33309 2018-01-23T06:52:56.206Z,1516690376.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:56.570Z,1516690376.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x62325 got:0x1857 2018-01-23T06:52:56.610Z,1516690376.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:56.988Z,1516690376.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:57.405Z,1516690377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:57.778Z,1516690377.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:58.193Z,1516690378.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:58.597Z,1516690378.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:59.013Z,1516690379.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:59.393Z,1516690379.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:52:59.776Z,1516690379.776 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T06:52:59.801Z,1516690379.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:00.185Z,1516690380.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:00.600Z,1516690380.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:00.996Z,1516690380.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:01.396Z,1516690381.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:01.789Z,1516690381.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:02.185Z,1516690382.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:02.593Z,1516690382.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:02.993Z,1516690382.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:03.391Z,1516690383.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:03.794Z,1516690383.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:04.201Z,1516690384.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:04.596Z,1516690384.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:04.989Z,1516690384.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:05.396Z,1516690385.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:05.797Z,1516690385.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:06.187Z,1516690386.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:06.572Z,1516690386.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:07.007Z,1516690387.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:07.403Z,1516690387.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:07.797Z,1516690387.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:08.178Z,1516690388.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:08.605Z,1516690388.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:08.976Z,1516690388.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:09.396Z,1516690389.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:09.777Z,1516690389.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:10.175Z,1516690390.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:10.532Z,1516690390.532 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T06:53:10.532Z,1516690390.532 [NAL9602] Data Fault, FailCount= 5 2018-01-23T06:53:10.532Z,1516690390.532 [NAL9602](ERROR): Data Fault 2018-01-23T06:53:10.597Z,1516690390.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:10.610Z,1516690390.610 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T06:53:10.610Z,1516690390.610 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T06:53:10.932Z,1516690390.932 [NAL9602](INFO): Powering down 2018-01-23T06:53:10.985Z,1516690390.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:11.004Z,1516690391.004 [CBIT](INFO): Critical error at 20180123T065310 2018-01-23T06:53:11.376Z,1516690391.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:11.775Z,1516690391.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:12.175Z,1516690392.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:12.570Z,1516690392.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:12.974Z,1516690392.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:13.371Z,1516690393.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:13.772Z,1516690393.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:14.179Z,1516690394.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:14.572Z,1516690394.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:14.976Z,1516690394.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:15.368Z,1516690395.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:15.771Z,1516690395.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:16.170Z,1516690396.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:16.568Z,1516690396.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:16.971Z,1516690396.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:17.374Z,1516690397.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:17.775Z,1516690397.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:18.175Z,1516690398.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:18.570Z,1516690398.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:18.971Z,1516690398.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:19.371Z,1516690399.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:19.776Z,1516690399.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:20.170Z,1516690400.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:23.275Z,1516690403.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:23.417Z,1516690403.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:23.742Z,1516690403.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:24.139Z,1516690404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:24.530Z,1516690404.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:24.942Z,1516690404.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:25.339Z,1516690405.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:25.737Z,1516690405.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:26.139Z,1516690406.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:26.538Z,1516690406.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:26.937Z,1516690406.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:27.337Z,1516690407.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:27.748Z,1516690407.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:28.138Z,1516690408.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:28.537Z,1516690408.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:28.941Z,1516690408.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:29.338Z,1516690409.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:29.738Z,1516690409.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:30.141Z,1516690410.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:30.538Z,1516690410.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:30.938Z,1516690410.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:31.344Z,1516690411.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:31.739Z,1516690411.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:32.139Z,1516690412.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:32.545Z,1516690412.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:32.940Z,1516690412.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:33.339Z,1516690413.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:33.744Z,1516690413.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:34.140Z,1516690414.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:34.539Z,1516690414.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:34.944Z,1516690414.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:35.338Z,1516690415.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:35.744Z,1516690415.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:36.140Z,1516690416.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:36.540Z,1516690416.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:36.948Z,1516690416.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:37.340Z,1516690417.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:37.739Z,1516690417.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:38.139Z,1516690418.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:38.548Z,1516690418.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:38.939Z,1516690418.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:39.337Z,1516690419.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:39.741Z,1516690419.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:40.138Z,1516690420.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:40.541Z,1516690420.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:40.942Z,1516690420.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:41.338Z,1516690421.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:41.744Z,1516690421.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:42.134Z,1516690422.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:42.538Z,1516690422.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:42.944Z,1516690422.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:43.335Z,1516690423.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:43.737Z,1516690423.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:44.144Z,1516690424.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:44.535Z,1516690424.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:44.937Z,1516690424.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:45.344Z,1516690425.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:45.737Z,1516690425.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:46.138Z,1516690426.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:46.540Z,1516690426.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:46.941Z,1516690426.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:47.338Z,1516690427.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:47.744Z,1516690427.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:48.134Z,1516690428.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:48.538Z,1516690428.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:48.944Z,1516690428.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:49.335Z,1516690429.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:49.738Z,1516690429.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:50.144Z,1516690430.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:50.535Z,1516690430.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:50.938Z,1516690430.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:51.344Z,1516690431.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:51.741Z,1516690431.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:52.142Z,1516690432.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:52.544Z,1516690432.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:52.940Z,1516690432.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:53.342Z,1516690433.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:53.744Z,1516690433.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:54.135Z,1516690434.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:54.538Z,1516690434.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:54.944Z,1516690434.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:55.335Z,1516690435.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:55.738Z,1516690435.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:56.144Z,1516690436.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:56.535Z,1516690436.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:56.938Z,1516690436.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:57.341Z,1516690437.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:57.741Z,1516690437.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:58.142Z,1516690438.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:58.544Z,1516690438.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:58.941Z,1516690438.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:59.340Z,1516690439.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:53:59.744Z,1516690439.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:00.135Z,1516690440.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:00.539Z,1516690440.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:00.939Z,1516690440.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:01.335Z,1516690441.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:01.739Z,1516690441.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:02.137Z,1516690442.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:02.537Z,1516690442.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:02.940Z,1516690442.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:03.340Z,1516690443.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:03.737Z,1516690443.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:04.140Z,1516690444.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:04.539Z,1516690444.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:04.935Z,1516690444.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:05.340Z,1516690445.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:05.740Z,1516690445.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:06.137Z,1516690446.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:06.540Z,1516690446.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:06.940Z,1516690446.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:07.338Z,1516690447.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:07.739Z,1516690447.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:08.140Z,1516690448.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:08.544Z,1516690448.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:08.943Z,1516690448.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:09.349Z,1516690449.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:09.742Z,1516690449.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:10.143Z,1516690450.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:10.538Z,1516690450.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:10.939Z,1516690450.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:11.341Z,1516690451.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:11.742Z,1516690451.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:12.140Z,1516690452.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:12.541Z,1516690452.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:12.942Z,1516690452.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:13.340Z,1516690453.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:13.742Z,1516690453.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:14.148Z,1516690454.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:14.541Z,1516690454.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:14.944Z,1516690454.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:15.341Z,1516690455.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:15.741Z,1516690455.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:16.139Z,1516690456.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:16.541Z,1516690456.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:16.556Z,1516690456.556 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T06:54:16.939Z,1516690456.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:17.339Z,1516690457.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:17.749Z,1516690457.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:18.138Z,1516690458.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:18.536Z,1516690458.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:18.949Z,1516690458.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:18.953Z,1516690458.953 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T06:54:18.953Z,1516690458.953 [Default:CheckIn:C.Wait] Stopped 2018-01-23T06:54:18.953Z,1516690458.953 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T06:54:18.953Z,1516690458.953 [Default:CheckIn:D] Running Loop=1 2018-01-23T06:54:19.341Z,1516690459.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:19.344Z,1516690459.344 [Default:CheckIn:D] Stopped 2018-01-23T06:54:19.344Z,1516690459.344 [Default:CheckIn:E] Running Loop=1 2018-01-23T06:54:19.738Z,1516690459.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.454736 min 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn:E] Stopped 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn] Stopped 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn](INFO): Running loop #22 2018-01-23T06:54:19.742Z,1516690459.742 [Default:CheckIn] Running Loop=22 2018-01-23T06:54:19.743Z,1516690459.743 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T06:54:19.743Z,1516690459.743 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T06:54:20.145Z,1516690460.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:20.546Z,1516690460.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:23.636Z,1516690463.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:23.783Z,1516690463.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:24.105Z,1516690464.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:24.501Z,1516690464.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:24.901Z,1516690464.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:25.300Z,1516690465.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:25.700Z,1516690465.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:26.101Z,1516690466.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:26.500Z,1516690466.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:26.900Z,1516690466.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:27.301Z,1516690467.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:27.704Z,1516690467.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:28.102Z,1516690468.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:28.503Z,1516690468.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:28.900Z,1516690468.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:29.298Z,1516690469.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:29.701Z,1516690469.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:30.100Z,1516690470.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:30.500Z,1516690470.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:30.901Z,1516690470.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:31.304Z,1516690471.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:31.702Z,1516690471.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:32.103Z,1516690472.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:32.500Z,1516690472.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:32.908Z,1516690472.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:33.303Z,1516690473.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:33.303Z,1516690473.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-01-23T06:54:33.304Z,1516690473.304 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:54:33.305Z,1516690473.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:33.305Z,1516690473.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-01-23T06:54:33.305Z,1516690473.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:54:33.307Z,1516690473.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:33.307Z,1516690473.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73 2018-01-23T06:54:33.308Z,1516690473.308 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:54:33.344Z,1516690473.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:54:33.344Z,1516690473.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:54:33.344Z,1516690473.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:54:33.711Z,1516690473.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:54:33.711Z,1516690473.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-01-23T06:54:33.712Z,1516690473.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:54:33.712Z,1516690473.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-01-23T06:54:33.712Z,1516690473.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:54:33.712Z,1516690473.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73 2018-01-23T06:54:34.107Z,1516690474.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:54:34.108Z,1516690474.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:54:34.108Z,1516690474.108 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:54:34.108Z,1516690474.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:54:34.109Z,1516690474.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:54:34.109Z,1516690474.109 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:54:34.110Z,1516690474.110 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:54:34.110Z,1516690474.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:54:34.110Z,1516690474.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:54:34.509Z,1516690474.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:54:34.510Z,1516690474.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:34.908Z,1516690474.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:54:34.909Z,1516690474.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:35.302Z,1516690475.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:54:35.303Z,1516690475.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:35.707Z,1516690475.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:54:35.708Z,1516690475.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:36.104Z,1516690476.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:54:36.105Z,1516690476.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:36.501Z,1516690476.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:54:36.502Z,1516690476.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:36.913Z,1516690476.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:54:36.914Z,1516690476.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:37.310Z,1516690477.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:54:37.311Z,1516690477.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:37.709Z,1516690477.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:54:37.710Z,1516690477.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:38.110Z,1516690478.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:54:38.111Z,1516690478.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:38.507Z,1516690478.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:54:38.508Z,1516690478.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:38.909Z,1516690478.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:54:38.910Z,1516690478.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:39.310Z,1516690479.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:54:39.311Z,1516690479.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:39.707Z,1516690479.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:54:39.708Z,1516690479.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:40.101Z,1516690480.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:54:40.102Z,1516690480.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:40.506Z,1516690480.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:54:40.507Z,1516690480.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:40.912Z,1516690480.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:54:40.913Z,1516690480.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:41.308Z,1516690481.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:54:41.309Z,1516690481.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:41.710Z,1516690481.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:54:41.711Z,1516690481.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:42.110Z,1516690482.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:54:42.111Z,1516690482.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:42.506Z,1516690482.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:54:42.507Z,1516690482.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:42.894Z,1516690482.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:54:42.911Z,1516690482.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:43.294Z,1516690483.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:54:43.295Z,1516690483.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:43.700Z,1516690483.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:54:43.701Z,1516690483.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:44.098Z,1516690484.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:54:44.100Z,1516690484.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:44.506Z,1516690484.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:54:44.523Z,1516690484.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:44.898Z,1516690484.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:54:44.899Z,1516690484.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:45.304Z,1516690485.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:54:45.305Z,1516690485.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:45.706Z,1516690485.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:54:45.707Z,1516690485.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:46.102Z,1516690486.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:54:46.103Z,1516690486.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:46.504Z,1516690486.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:54:46.505Z,1516690486.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:46.911Z,1516690486.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:54:46.912Z,1516690486.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:47.307Z,1516690487.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:54:47.308Z,1516690487.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:47.707Z,1516690487.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:54:47.708Z,1516690487.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:48.104Z,1516690488.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:54:48.105Z,1516690488.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:48.504Z,1516690488.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:54:48.505Z,1516690488.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:48.903Z,1516690488.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:54:48.904Z,1516690488.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:49.311Z,1516690489.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:54:49.312Z,1516690489.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:49.703Z,1516690489.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:54:49.704Z,1516690489.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:50.103Z,1516690490.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:54:50.104Z,1516690490.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:50.506Z,1516690490.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:54:50.508Z,1516690490.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:50.904Z,1516690490.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:54:50.905Z,1516690490.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:51.309Z,1516690491.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:54:51.310Z,1516690491.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:51.707Z,1516690491.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:54:51.708Z,1516690491.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:52.106Z,1516690492.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:54:52.107Z,1516690492.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:52.512Z,1516690492.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:54:52.513Z,1516690492.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:52.906Z,1516690492.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:54:52.907Z,1516690492.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:53.314Z,1516690493.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:53.708Z,1516690493.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:54.109Z,1516690494.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:54.510Z,1516690494.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:54.904Z,1516690494.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:55.312Z,1516690495.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:55.713Z,1516690495.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:56.115Z,1516690496.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:56.511Z,1516690496.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:56.894Z,1516690496.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:57.292Z,1516690497.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:57.695Z,1516690497.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:58.098Z,1516690498.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:58.495Z,1516690498.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:58.903Z,1516690498.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:59.306Z,1516690499.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:54:59.700Z,1516690499.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:00.109Z,1516690500.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:00.501Z,1516690500.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:00.903Z,1516690500.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:01.311Z,1516690501.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:01.704Z,1516690501.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:02.102Z,1516690502.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:02.506Z,1516690502.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:02.901Z,1516690502.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:03.302Z,1516690503.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:03.712Z,1516690503.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:04.108Z,1516690504.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:04.499Z,1516690504.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:04.912Z,1516690504.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:05.308Z,1516690505.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:05.706Z,1516690505.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:06.106Z,1516690506.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:06.501Z,1516690506.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:06.902Z,1516690506.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:07.305Z,1516690507.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:07.702Z,1516690507.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:08.102Z,1516690508.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:08.510Z,1516690508.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:08.901Z,1516690508.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:09.308Z,1516690509.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:09.706Z,1516690509.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:10.112Z,1516690510.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:10.508Z,1516690510.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:10.904Z,1516690510.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:10.917Z,1516690510.917 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T06:55:10.917Z,1516690510.917 [NAL9602] No Fault, FailCount= 5 2018-01-23T06:55:11.264Z,1516690511.264 [NAL9602](INFO): Powering up NAL9602 2018-01-23T06:55:11.315Z,1516690511.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:11.708Z,1516690511.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:12.111Z,1516690512.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:12.505Z,1516690512.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:12.909Z,1516690512.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:13.309Z,1516690513.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:13.705Z,1516690513.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:14.112Z,1516690514.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:14.509Z,1516690514.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:14.913Z,1516690514.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:15.304Z,1516690515.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:15.711Z,1516690515.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:16.115Z,1516690516.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:16.500Z,1516690516.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:16.915Z,1516690516.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:17.316Z,1516690517.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:17.707Z,1516690517.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:18.119Z,1516690518.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:18.522Z,1516690518.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:18.898Z,1516690518.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:19.321Z,1516690519.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:19.696Z,1516690519.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:20.102Z,1516690520.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:20.509Z,1516690520.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:20.904Z,1516690520.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:23.996Z,1516690523.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:24.134Z,1516690524.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:24.432Z,1516690524.432 [NAL9602](INFO): NAL9602 initialized 2018-01-23T06:55:24.493Z,1516690524.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:24.867Z,1516690524.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:25.266Z,1516690525.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:25.687Z,1516690525.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:26.066Z,1516690526.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:26.463Z,1516690526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:26.893Z,1516690526.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:27.278Z,1516690527.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:27.669Z,1516690527.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:28.078Z,1516690528.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:28.465Z,1516690528.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:28.877Z,1516690528.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:29.269Z,1516690529.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:29.673Z,1516690529.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:30.074Z,1516690530.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:30.473Z,1516690530.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:30.881Z,1516690530.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:31.265Z,1516690531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:31.705Z,1516690531.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:32.082Z,1516690532.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:32.476Z,1516690532.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:32.889Z,1516690532.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:33.380Z,1516690533.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:33.703Z,1516690533.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:34.098Z,1516690534.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:34.465Z,1516690534.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:34.872Z,1516690534.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:35.273Z,1516690535.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:35.669Z,1516690535.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:36.125Z,1516690536.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:36.492Z,1516690536.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:36.914Z,1516690536.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:37.320Z,1516690537.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:37.685Z,1516690537.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:38.092Z,1516690538.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:38.465Z,1516690538.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:38.911Z,1516690538.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:39.309Z,1516690539.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:39.709Z,1516690539.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:40.133Z,1516690540.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:40.506Z,1516690540.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:40.877Z,1516690540.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:41.281Z,1516690541.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:41.684Z,1516690541.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:42.081Z,1516690542.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:42.505Z,1516690542.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:42.926Z,1516690542.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:43.285Z,1516690543.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:43.699Z,1516690543.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:44.102Z,1516690544.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:44.469Z,1516690544.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:44.892Z,1516690544.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:45.284Z,1516690545.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:45.677Z,1516690545.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:46.084Z,1516690546.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:46.474Z,1516690546.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:46.877Z,1516690546.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:47.275Z,1516690547.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:47.657Z,1516690547.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:48.083Z,1516690548.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:48.490Z,1516690548.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:48.879Z,1516690548.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:49.255Z,1516690549.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:49.658Z,1516690549.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:50.063Z,1516690550.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:50.488Z,1516690550.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:50.861Z,1516690550.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x48761 got:0x61874 2018-01-23T06:55:50.893Z,1516690550.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:51.286Z,1516690551.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:51.682Z,1516690551.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:52.089Z,1516690552.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:52.469Z,1516690552.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:52.865Z,1516690552.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:53.268Z,1516690553.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:53.666Z,1516690553.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:54.093Z,1516690554.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:54.474Z,1516690554.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:54.901Z,1516690554.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:55.286Z,1516690555.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:55.657Z,1516690555.657 [PNI_TCM](ERROR): CRC does not match. Expected:0x18371 got:0x1857 2018-01-23T06:55:55.692Z,1516690555.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:56.066Z,1516690556.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:56.468Z,1516690556.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:56.873Z,1516690556.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:57.288Z,1516690557.288 [PNI_TCM](ERROR): CRC does not match. Expected:0x32529 got:0x25422 2018-01-23T06:55:57.310Z,1516690557.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:57.673Z,1516690557.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:58.070Z,1516690558.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:58.473Z,1516690558.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:58.855Z,1516690558.855 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T06:55:58.881Z,1516690558.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:59.306Z,1516690559.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:55:59.660Z,1516690559.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:00.116Z,1516690560.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:00.464Z,1516690560.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x4711 got:0x51520 2018-01-23T06:56:00.493Z,1516690560.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:00.872Z,1516690560.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:01.256Z,1516690561.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:01.677Z,1516690561.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:02.081Z,1516690562.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:02.460Z,1516690562.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:02.865Z,1516690562.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:03.288Z,1516690563.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:03.697Z,1516690563.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:04.093Z,1516690564.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:04.467Z,1516690564.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:04.882Z,1516690564.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:05.268Z,1516690565.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:05.667Z,1516690565.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:06.090Z,1516690566.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:06.489Z,1516690566.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:06.883Z,1516690566.883 [PNI_TCM](ERROR): CRC does not match. Expected:0x6272 got:0x45596 2018-01-23T06:56:06.901Z,1516690566.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:07.268Z,1516690567.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:07.668Z,1516690567.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:08.087Z,1516690568.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:08.470Z,1516690568.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:08.878Z,1516690568.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:09.300Z,1516690569.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:09.695Z,1516690569.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:10.073Z,1516690570.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:10.468Z,1516690570.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:10.877Z,1516690570.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:11.296Z,1516690571.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:11.664Z,1516690571.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:12.071Z,1516690572.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:12.477Z,1516690572.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:12.898Z,1516690572.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:13.261Z,1516690573.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:13.669Z,1516690573.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:14.067Z,1516690574.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:14.496Z,1516690574.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:14.881Z,1516690574.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:15.276Z,1516690575.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:15.677Z,1516690575.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:16.096Z,1516690576.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:16.463Z,1516690576.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:16.875Z,1516690576.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:17.269Z,1516690577.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:17.673Z,1516690577.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:18.073Z,1516690578.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:18.476Z,1516690578.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:18.880Z,1516690578.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:19.299Z,1516690579.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:19.663Z,1516690579.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:20.081Z,1516690580.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:20.477Z,1516690580.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:20.896Z,1516690580.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:21.265Z,1516690581.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:24.367Z,1516690584.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:24.509Z,1516690584.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:24.878Z,1516690584.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:25.254Z,1516690585.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:25.625Z,1516690585.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:26.053Z,1516690586.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:26.428Z,1516690586.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:26.827Z,1516690586.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:27.258Z,1516690587.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:27.663Z,1516690587.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:28.062Z,1516690588.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:28.431Z,1516690588.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:28.840Z,1516690588.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:29.229Z,1516690589.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:29.631Z,1516690589.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:30.034Z,1516690590.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:30.434Z,1516690590.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:30.834Z,1516690590.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:31.231Z,1516690591.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:31.630Z,1516690591.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:32.034Z,1516690592.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:32.437Z,1516690592.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:32.834Z,1516690592.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:33.232Z,1516690593.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:33.640Z,1516690593.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:34.034Z,1516690594.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:34.438Z,1516690594.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:34.844Z,1516690594.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:35.230Z,1516690595.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:35.653Z,1516690595.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:36.036Z,1516690596.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:36.437Z,1516690596.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:36.839Z,1516690596.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:37.237Z,1516690597.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:37.630Z,1516690597.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:38.041Z,1516690598.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:38.436Z,1516690598.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:38.830Z,1516690598.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:39.241Z,1516690599.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:39.641Z,1516690599.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:40.038Z,1516690600.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:40.432Z,1516690600.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:40.840Z,1516690600.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:41.232Z,1516690601.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:41.638Z,1516690601.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:42.041Z,1516690602.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:42.447Z,1516690602.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:42.846Z,1516690602.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:43.246Z,1516690603.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:43.642Z,1516690603.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:44.041Z,1516690604.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:44.438Z,1516690604.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:44.834Z,1516690604.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:45.248Z,1516690605.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:45.652Z,1516690605.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:46.047Z,1516690606.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:46.441Z,1516690606.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:46.844Z,1516690606.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:47.238Z,1516690607.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:47.641Z,1516690607.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:48.047Z,1516690608.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:48.452Z,1516690608.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:48.846Z,1516690608.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:49.245Z,1516690609.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:49.621Z,1516690609.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:50.045Z,1516690610.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:50.423Z,1516690610.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:50.830Z,1516690610.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:51.234Z,1516690611.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:51.663Z,1516690611.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:52.061Z,1516690612.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:52.430Z,1516690612.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:52.833Z,1516690612.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:53.231Z,1516690613.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:53.630Z,1516690613.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:54.032Z,1516690614.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:54.441Z,1516690614.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:54.838Z,1516690614.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:55.245Z,1516690615.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:55.630Z,1516690615.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:56.032Z,1516690616.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:56.432Z,1516690616.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:56.830Z,1516690616.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:57.241Z,1516690617.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:57.645Z,1516690617.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:58.041Z,1516690618.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:58.433Z,1516690618.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:58.844Z,1516690618.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:59.230Z,1516690619.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:56:59.645Z,1516690619.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:00.031Z,1516690620.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:00.442Z,1516690620.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:00.845Z,1516690620.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:01.241Z,1516690621.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:01.631Z,1516690621.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:02.034Z,1516690622.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:02.432Z,1516690622.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:02.833Z,1516690622.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:03.241Z,1516690623.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:03.645Z,1516690623.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:04.053Z,1516690624.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:04.433Z,1516690624.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:04.833Z,1516690624.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:05.237Z,1516690625.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:05.636Z,1516690625.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:06.043Z,1516690626.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:06.443Z,1516690626.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:06.846Z,1516690626.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:07.243Z,1516690627.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:07.640Z,1516690627.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:08.039Z,1516690628.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:08.441Z,1516690628.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:08.833Z,1516690628.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:09.242Z,1516690629.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:09.647Z,1516690629.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:10.042Z,1516690630.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:10.437Z,1516690630.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:10.834Z,1516690630.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:11.241Z,1516690631.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:11.648Z,1516690631.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:12.035Z,1516690632.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:12.452Z,1516690632.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:12.846Z,1516690632.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:13.243Z,1516690633.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:13.637Z,1516690633.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:14.037Z,1516690634.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:14.442Z,1516690634.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:14.832Z,1516690634.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:15.245Z,1516690635.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:15.651Z,1516690635.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:16.045Z,1516690636.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:16.443Z,1516690636.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:16.841Z,1516690636.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:17.244Z,1516690637.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:17.640Z,1516690637.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:18.050Z,1516690638.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:18.446Z,1516690638.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:18.856Z,1516690638.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:19.247Z,1516690639.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:19.650Z,1516690639.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:20.046Z,1516690640.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:20.432Z,1516690640.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:20.833Z,1516690640.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:21.238Z,1516690641.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:21.662Z,1516690641.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:24.734Z,1516690644.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:24.876Z,1516690644.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:25.224Z,1516690645.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:25.629Z,1516690645.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:26.037Z,1516690646.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:26.438Z,1516690646.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:26.846Z,1516690646.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:27.218Z,1516690647.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:27.642Z,1516690647.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:28.015Z,1516690648.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:28.415Z,1516690648.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:28.818Z,1516690648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:29.226Z,1516690649.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:29.625Z,1516690649.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:30.033Z,1516690650.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:30.425Z,1516690650.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:30.825Z,1516690650.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:31.220Z,1516690651.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:31.619Z,1516690651.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:32.023Z,1516690652.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:32.427Z,1516690652.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:32.830Z,1516690652.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:33.227Z,1516690653.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:33.616Z,1516690653.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:34.025Z,1516690654.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:34.423Z,1516690654.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:34.423Z,1516690654.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-01-23T06:57:34.423Z,1516690654.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T06:57:34.425Z,1516690654.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:34.425Z,1516690654.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-01-23T06:57:34.425Z,1516690654.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T06:57:34.427Z,1516690654.427 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:34.427Z,1516690654.427 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74 2018-01-23T06:57:34.427Z,1516690654.427 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T06:57:34.439Z,1516690654.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T06:57:34.439Z,1516690654.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T06:57:34.440Z,1516690654.440 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T06:57:34.836Z,1516690654.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T06:57:34.836Z,1516690654.836 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-01-23T06:57:34.836Z,1516690654.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T06:57:34.836Z,1516690654.836 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-01-23T06:57:34.837Z,1516690654.837 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T06:57:34.837Z,1516690654.837 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74 2018-01-23T06:57:35.225Z,1516690655.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T06:57:35.225Z,1516690655.225 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:57:35.226Z,1516690655.226 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:57:35.226Z,1516690655.226 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T06:57:35.227Z,1516690655.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:57:35.227Z,1516690655.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:57:35.227Z,1516690655.227 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T06:57:35.228Z,1516690655.228 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T06:57:35.228Z,1516690655.228 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T06:57:35.628Z,1516690655.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T06:57:35.629Z,1516690655.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:36.036Z,1516690656.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T06:57:36.037Z,1516690656.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:36.427Z,1516690656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T06:57:36.428Z,1516690656.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:36.813Z,1516690656.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T06:57:36.813Z,1516690656.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:37.223Z,1516690657.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T06:57:37.224Z,1516690657.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:37.628Z,1516690657.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T06:57:37.629Z,1516690657.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:38.024Z,1516690658.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T06:57:38.025Z,1516690658.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:38.425Z,1516690658.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T06:57:38.426Z,1516690658.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:38.829Z,1516690658.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T06:57:38.830Z,1516690658.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:39.225Z,1516690659.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T06:57:39.226Z,1516690659.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:39.626Z,1516690659.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T06:57:39.627Z,1516690659.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:40.028Z,1516690660.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T06:57:40.029Z,1516690660.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:40.421Z,1516690660.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T06:57:40.422Z,1516690660.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:40.824Z,1516690660.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T06:57:40.825Z,1516690660.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:41.231Z,1516690661.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T06:57:41.232Z,1516690661.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:41.635Z,1516690661.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T06:57:41.636Z,1516690661.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:42.029Z,1516690662.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T06:57:42.030Z,1516690662.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:42.428Z,1516690662.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T06:57:42.429Z,1516690662.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:42.804Z,1516690662.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T06:57:42.805Z,1516690662.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:43.228Z,1516690663.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T06:57:43.229Z,1516690663.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:43.607Z,1516690663.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T06:57:43.608Z,1516690663.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:44.016Z,1516690664.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T06:57:44.017Z,1516690664.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:44.438Z,1516690664.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T06:57:44.439Z,1516690664.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:44.848Z,1516690664.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T06:57:44.849Z,1516690664.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:45.221Z,1516690665.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T06:57:45.222Z,1516690665.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:45.614Z,1516690665.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T06:57:45.615Z,1516690665.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:46.024Z,1516690666.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T06:57:46.025Z,1516690666.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:46.418Z,1516690666.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T06:57:46.419Z,1516690666.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:46.814Z,1516690666.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T06:57:46.815Z,1516690666.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:47.221Z,1516690667.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T06:57:47.222Z,1516690667.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:47.624Z,1516690667.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T06:57:47.625Z,1516690667.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:48.024Z,1516690668.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T06:57:48.025Z,1516690668.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:48.416Z,1516690668.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T06:57:48.417Z,1516690668.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:48.814Z,1516690668.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T06:57:48.816Z,1516690668.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:49.217Z,1516690669.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T06:57:49.218Z,1516690669.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:49.619Z,1516690669.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T06:57:49.620Z,1516690669.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:50.016Z,1516690670.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T06:57:50.017Z,1516690670.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:50.432Z,1516690670.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T06:57:50.433Z,1516690670.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:50.836Z,1516690670.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T06:57:50.837Z,1516690670.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:51.230Z,1516690671.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T06:57:51.235Z,1516690671.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:51.632Z,1516690671.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T06:57:51.633Z,1516690671.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:52.028Z,1516690672.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T06:57:52.029Z,1516690672.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:52.424Z,1516690672.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T06:57:52.425Z,1516690672.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:52.821Z,1516690672.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T06:57:52.822Z,1516690672.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:53.230Z,1516690673.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T06:57:53.231Z,1516690673.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:53.630Z,1516690673.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T06:57:53.631Z,1516690673.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:54.029Z,1516690674.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T06:57:54.030Z,1516690674.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:54.432Z,1516690674.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:54.827Z,1516690674.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:55.225Z,1516690675.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:55.629Z,1516690675.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:56.033Z,1516690676.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:56.445Z,1516690676.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:56.845Z,1516690676.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:57.242Z,1516690677.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:57.614Z,1516690677.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:58.013Z,1516690678.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:58.417Z,1516690678.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:58.817Z,1516690678.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:59.222Z,1516690679.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:57:59.646Z,1516690679.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:00.030Z,1516690680.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:00.420Z,1516690680.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:00.821Z,1516690680.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:01.222Z,1516690681.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:01.622Z,1516690681.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:02.018Z,1516690682.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:02.429Z,1516690682.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:02.831Z,1516690682.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:03.229Z,1516690683.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:03.621Z,1516690683.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:04.018Z,1516690684.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:04.427Z,1516690684.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:04.818Z,1516690684.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:05.227Z,1516690685.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:05.630Z,1516690685.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:06.026Z,1516690686.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:06.424Z,1516690686.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:06.823Z,1516690686.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:07.230Z,1516690687.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:07.630Z,1516690687.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:08.029Z,1516690688.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:08.423Z,1516690688.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:08.825Z,1516690688.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:09.226Z,1516690689.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:09.637Z,1516690689.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:10.035Z,1516690690.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:10.424Z,1516690690.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:10.825Z,1516690690.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:11.237Z,1516690691.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:11.630Z,1516690691.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:12.026Z,1516690692.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:12.424Z,1516690692.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:12.825Z,1516690692.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:13.226Z,1516690693.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:13.636Z,1516690693.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:14.026Z,1516690694.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:14.423Z,1516690694.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:14.826Z,1516690694.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:15.230Z,1516690695.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:15.629Z,1516690695.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:16.032Z,1516690696.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:16.424Z,1516690696.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:16.817Z,1516690696.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:17.227Z,1516690697.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:17.629Z,1516690697.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:18.036Z,1516690698.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:18.438Z,1516690698.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:18.821Z,1516690698.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:19.233Z,1516690699.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:19.638Z,1516690699.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:20.030Z,1516690700.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:20.423Z,1516690700.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:20.826Z,1516690700.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:21.226Z,1516690701.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:21.630Z,1516690701.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:22.036Z,1516690702.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:25.117Z,1516690705.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:25.263Z,1516690705.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:25.590Z,1516690705.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:25.994Z,1516690705.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:26.397Z,1516690706.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:26.787Z,1516690706.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:27.190Z,1516690707.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:27.584Z,1516690707.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:27.997Z,1516690707.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:28.398Z,1516690708.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:28.807Z,1516690708.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:29.203Z,1516690709.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:29.605Z,1516690709.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:29.981Z,1516690709.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:30.381Z,1516690710.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:30.782Z,1516690710.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:31.188Z,1516690711.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:31.613Z,1516690711.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:31.991Z,1516690711.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:32.386Z,1516690712.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:32.797Z,1516690712.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:33.189Z,1516690713.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:33.586Z,1516690713.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:33.986Z,1516690713.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:34.390Z,1516690714.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:34.790Z,1516690714.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:35.190Z,1516690715.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:35.591Z,1516690715.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:35.997Z,1516690715.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:36.417Z,1516690716.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:36.789Z,1516690716.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:37.193Z,1516690717.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:37.599Z,1516690717.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:38.005Z,1516690718.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:38.395Z,1516690718.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:38.796Z,1516690718.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:39.188Z,1516690719.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:39.596Z,1516690719.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:39.993Z,1516690719.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:40.399Z,1516690720.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:40.805Z,1516690720.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:41.195Z,1516690721.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:41.586Z,1516690721.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:42.001Z,1516690722.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:42.391Z,1516690722.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:42.795Z,1516690722.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:43.191Z,1516690723.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:43.598Z,1516690723.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:43.999Z,1516690723.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:44.398Z,1516690724.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:44.795Z,1516690724.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:45.196Z,1516690725.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:45.594Z,1516690725.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:45.997Z,1516690725.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:46.406Z,1516690726.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:46.804Z,1516690726.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:47.204Z,1516690727.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:47.581Z,1516690727.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:48.001Z,1516690728.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:48.402Z,1516690728.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:48.804Z,1516690728.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:49.199Z,1516690729.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:49.605Z,1516690729.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:50.007Z,1516690730.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:50.404Z,1516690730.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:50.803Z,1516690730.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:51.179Z,1516690731.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:51.584Z,1516690731.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:51.983Z,1516690731.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:52.390Z,1516690732.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:52.805Z,1516690732.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:53.190Z,1516690733.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:53.582Z,1516690733.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:53.984Z,1516690733.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:54.383Z,1516690734.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:54.794Z,1516690734.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:55.184Z,1516690735.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:55.586Z,1516690735.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:55.989Z,1516690735.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:56.408Z,1516690736.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:56.782Z,1516690736.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:57.183Z,1516690737.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:57.593Z,1516690737.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:57.988Z,1516690737.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:58.386Z,1516690738.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:58.798Z,1516690738.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:59.190Z,1516690739.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:59.588Z,1516690739.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:58:59.993Z,1516690739.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:00.383Z,1516690740.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:00.784Z,1516690740.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:01.193Z,1516690741.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:01.602Z,1516690741.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:01.993Z,1516690741.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:02.397Z,1516690742.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:02.785Z,1516690742.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:03.196Z,1516690743.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:03.586Z,1516690743.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:03.984Z,1516690743.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:04.400Z,1516690744.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:04.794Z,1516690744.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:05.194Z,1516690745.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:05.586Z,1516690745.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:05.997Z,1516690745.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:06.391Z,1516690746.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:06.789Z,1516690746.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:07.197Z,1516690747.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:07.604Z,1516690747.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:07.994Z,1516690747.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:08.401Z,1516690748.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:08.784Z,1516690748.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:09.197Z,1516690749.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:09.593Z,1516690749.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:09.990Z,1516690749.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:10.393Z,1516690750.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:10.801Z,1516690750.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:11.197Z,1516690751.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:11.593Z,1516690751.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:11.984Z,1516690751.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:12.392Z,1516690752.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:12.792Z,1516690752.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:13.197Z,1516690753.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:13.609Z,1516690753.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:14.001Z,1516690754.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:14.405Z,1516690754.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:14.793Z,1516690754.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:15.194Z,1516690755.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:15.594Z,1516690755.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:15.998Z,1516690755.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:16.404Z,1516690756.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:16.807Z,1516690756.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:17.199Z,1516690757.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:17.593Z,1516690757.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:17.990Z,1516690757.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:18.401Z,1516690758.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:18.791Z,1516690758.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:19.196Z,1516690759.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:19.594Z,1516690759.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:20.002Z,1516690760.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:20.006Z,1516690760.006 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T06:54:19.7Z 2018-01-23T06:59:20.006Z,1516690760.006 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T06:59:20.006Z,1516690760.006 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T06:59:20.397Z,1516690760.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:20.908Z,1516690760.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:21.193Z,1516690761.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:24.434Z,1516690764.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:24.515Z,1516690764.515 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0088.lzma 2018-01-23T06:59:24.588Z,1516690764.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:24.906Z,1516690764.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:25.257Z,1516690765.257 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0088.lzma.bak 2018-01-23T06:59:25.257Z,1516690765.257 [DataOverHttps](INFO): SBD MOMSN=7755172 2018-01-23T06:59:25.314Z,1516690765.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:25.943Z,1516690765.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:26.102Z,1516690766.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:29.199Z,1516690769.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:29.341Z,1516690769.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:29.667Z,1516690769.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:30.094Z,1516690770.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:30.466Z,1516690770.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:30.863Z,1516690770.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:33.958Z,1516690773.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:34.032Z,1516690774.032 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0089.lzma 2018-01-23T06:59:34.073Z,1516690774.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:34.461Z,1516690774.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:34.809Z,1516690774.809 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0089.lzma.bak 2018-01-23T06:59:34.809Z,1516690774.809 [DataOverHttps](INFO): SBD MOMSN=7755175 2018-01-23T06:59:34.872Z,1516690774.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:35.522Z,1516690775.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:35.525Z,1516690775.525 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T06:59:35.525Z,1516690775.525 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T06:59:35.525Z,1516690775.525 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T06:59:35.659Z,1516690775.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:38.753Z,1516690778.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:38.873Z,1516690778.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:39.250Z,1516690779.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:39.656Z,1516690779.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:40.034Z,1516690780.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:40.421Z,1516690780.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:40.824Z,1516690780.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:41.225Z,1516690781.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:41.633Z,1516690781.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:42.026Z,1516690782.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:42.438Z,1516690782.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:42.833Z,1516690782.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:43.223Z,1516690783.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:43.622Z,1516690783.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:44.028Z,1516690784.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:44.430Z,1516690784.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:44.832Z,1516690784.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:45.235Z,1516690785.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:45.623Z,1516690785.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:46.030Z,1516690786.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:46.423Z,1516690786.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:46.817Z,1516690786.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:47.256Z,1516690787.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:47.645Z,1516690787.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:48.041Z,1516690788.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:48.441Z,1516690788.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:48.824Z,1516690788.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:49.233Z,1516690789.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:49.618Z,1516690789.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T06:59:49.645Z,1516690789.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:50.033Z,1516690790.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:50.436Z,1516690790.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:50.837Z,1516690790.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:51.233Z,1516690791.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:51.625Z,1516690791.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:52.025Z,1516690792.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:52.447Z,1516690792.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:52.830Z,1516690792.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:53.239Z,1516690793.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:53.631Z,1516690793.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:54.044Z,1516690794.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:54.451Z,1516690794.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:54.822Z,1516690794.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:55.224Z,1516690795.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:55.652Z,1516690795.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:56.034Z,1516690796.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:56.431Z,1516690796.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:56.833Z,1516690796.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:57.250Z,1516690797.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:57.627Z,1516690797.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:58.027Z,1516690798.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:58.433Z,1516690798.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:58.831Z,1516690798.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:59.226Z,1516690799.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T06:59:59.637Z,1516690799.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:00.032Z,1516690800.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:00.451Z,1516690800.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:00.818Z,1516690800.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:01.223Z,1516690801.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:01.624Z,1516690801.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:02.041Z,1516690802.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:02.433Z,1516690802.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:02.833Z,1516690802.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:03.237Z,1516690803.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:03.629Z,1516690803.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:04.032Z,1516690804.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:04.430Z,1516690804.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:04.824Z,1516690804.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:05.233Z,1516690805.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:05.637Z,1516690805.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:06.032Z,1516690806.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:06.432Z,1516690806.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:06.833Z,1516690806.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:07.220Z,1516690807.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:07.628Z,1516690807.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:08.023Z,1516690808.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:08.436Z,1516690808.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:08.835Z,1516690808.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:09.233Z,1516690809.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:09.638Z,1516690809.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:10.041Z,1516690810.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:10.439Z,1516690810.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:10.837Z,1516690810.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:11.232Z,1516690811.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:11.624Z,1516690811.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:12.024Z,1516690812.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:12.432Z,1516690812.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:12.836Z,1516690812.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:13.241Z,1516690813.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:13.622Z,1516690813.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:14.029Z,1516690814.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:14.434Z,1516690814.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:14.829Z,1516690814.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:15.237Z,1516690815.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:15.620Z,1516690815.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:16.021Z,1516690816.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:16.429Z,1516690816.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:16.833Z,1516690816.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:17.229Z,1516690817.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:17.622Z,1516690817.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:18.018Z,1516690818.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:18.429Z,1516690818.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:18.837Z,1516690818.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:19.232Z,1516690819.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:19.621Z,1516690819.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:20.020Z,1516690820.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:20.430Z,1516690820.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:20.836Z,1516690820.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:21.229Z,1516690821.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:21.624Z,1516690821.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:22.019Z,1516690822.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:22.429Z,1516690822.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:22.825Z,1516690822.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:23.229Z,1516690823.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:23.622Z,1516690823.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:24.021Z,1516690824.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:24.432Z,1516690824.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:24.829Z,1516690824.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:25.236Z,1516690825.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:25.625Z,1516690825.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:26.022Z,1516690826.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:26.430Z,1516690826.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:26.831Z,1516690826.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:27.230Z,1516690827.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:27.620Z,1516690827.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:28.020Z,1516690828.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:28.433Z,1516690828.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:28.828Z,1516690828.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:29.238Z,1516690829.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:29.622Z,1516690829.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:30.028Z,1516690830.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:30.437Z,1516690830.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:30.833Z,1516690830.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:31.230Z,1516690831.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:31.623Z,1516690831.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:32.031Z,1516690832.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:32.470Z,1516690832.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:32.836Z,1516690832.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:33.248Z,1516690833.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:33.652Z,1516690833.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:34.022Z,1516690834.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:34.466Z,1516690834.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:34.917Z,1516690834.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:35.259Z,1516690835.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:35.259Z,1516690835.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-01-23T07:00:35.259Z,1516690835.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:00:35.262Z,1516690835.262 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:35.262Z,1516690835.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-01-23T07:00:35.262Z,1516690835.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:00:35.264Z,1516690835.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:35.264Z,1516690835.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75 2018-01-23T07:00:35.264Z,1516690835.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:00:35.276Z,1516690835.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:00:35.277Z,1516690835.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:00:35.277Z,1516690835.277 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:00:35.666Z,1516690835.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:00:35.666Z,1516690835.666 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-01-23T07:00:35.666Z,1516690835.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:00:35.666Z,1516690835.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-01-23T07:00:35.667Z,1516690835.667 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:00:35.667Z,1516690835.667 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75 2018-01-23T07:00:36.028Z,1516690836.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:00:36.028Z,1516690836.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:00:36.028Z,1516690836.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:00:36.029Z,1516690836.029 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:00:36.029Z,1516690836.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:00:36.029Z,1516690836.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:00:36.030Z,1516690836.030 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:00:36.030Z,1516690836.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:00:36.031Z,1516690836.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:00:41.776Z,1516690841.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T07:00:41.777Z,1516690841.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:41.933Z,1516690841.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T07:00:41.933Z,1516690841.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:42.317Z,1516690842.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T07:00:42.318Z,1516690842.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:42.701Z,1516690842.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s. 2018-01-23T07:00:42.702Z,1516690842.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:43.105Z,1516690843.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s. 2018-01-23T07:00:43.106Z,1516690843.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:43.523Z,1516690843.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T07:00:43.524Z,1516690843.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:43.889Z,1516690843.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s. 2018-01-23T07:00:43.890Z,1516690843.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:44.332Z,1516690844.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T07:00:44.333Z,1516690844.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:44.732Z,1516690844.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T07:00:44.733Z,1516690844.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:45.108Z,1516690845.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T07:00:45.109Z,1516690845.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:45.507Z,1516690845.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s. 2018-01-23T07:00:45.508Z,1516690845.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:45.900Z,1516690845.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s. 2018-01-23T07:00:45.901Z,1516690845.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:46.276Z,1516690846.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s. 2018-01-23T07:00:46.277Z,1516690846.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:46.703Z,1516690846.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s. 2018-01-23T07:00:46.704Z,1516690846.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:47.108Z,1516690847.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T07:00:47.109Z,1516690847.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:47.500Z,1516690847.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s. 2018-01-23T07:00:47.501Z,1516690847.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:47.911Z,1516690847.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T07:00:47.912Z,1516690847.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:48.301Z,1516690848.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s. 2018-01-23T07:00:48.302Z,1516690848.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:48.700Z,1516690848.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s. 2018-01-23T07:00:48.701Z,1516690848.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:49.080Z,1516690849.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s. 2018-01-23T07:00:49.081Z,1516690849.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:49.488Z,1516690849.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s. 2018-01-23T07:00:49.489Z,1516690849.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:49.888Z,1516690849.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s. 2018-01-23T07:00:49.889Z,1516690849.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:50.285Z,1516690850.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s. 2018-01-23T07:00:50.286Z,1516690850.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:50.694Z,1516690850.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s. 2018-01-23T07:00:50.716Z,1516690850.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:51.110Z,1516690851.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T07:00:51.111Z,1516690851.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:51.516Z,1516690851.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T07:00:51.517Z,1516690851.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:51.894Z,1516690851.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s. 2018-01-23T07:00:51.900Z,1516690851.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:52.284Z,1516690852.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s. 2018-01-23T07:00:52.285Z,1516690852.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:52.687Z,1516690852.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s. 2018-01-23T07:00:52.688Z,1516690852.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:53.086Z,1516690853.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s. 2018-01-23T07:00:53.087Z,1516690853.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:53.498Z,1516690853.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s. 2018-01-23T07:00:53.512Z,1516690853.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:53.901Z,1516690853.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s. 2018-01-23T07:00:53.902Z,1516690853.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:54.292Z,1516690854.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s. 2018-01-23T07:00:54.293Z,1516690854.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:54.689Z,1516690854.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T07:00:54.690Z,1516690854.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:55.089Z,1516690855.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s. 2018-01-23T07:00:55.090Z,1516690855.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:55.501Z,1516690855.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:55.898Z,1516690855.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:56.297Z,1516690856.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:56.691Z,1516690856.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:57.092Z,1516690857.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:57.506Z,1516690857.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:57.905Z,1516690857.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:58.302Z,1516690858.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:58.689Z,1516690858.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:59.090Z,1516690859.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:59.505Z,1516690859.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:00:59.905Z,1516690859.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:00.301Z,1516690860.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:00.697Z,1516690860.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:01.095Z,1516690861.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:01.503Z,1516690861.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:01.907Z,1516690861.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:02.303Z,1516690862.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:02.696Z,1516690862.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:03.096Z,1516690863.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:03.499Z,1516690863.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:03.903Z,1516690863.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:04.309Z,1516690864.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:04.696Z,1516690864.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:05.101Z,1516690865.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:05.499Z,1516690865.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:05.904Z,1516690865.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:06.299Z,1516690866.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:06.695Z,1516690866.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:07.101Z,1516690867.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:07.490Z,1516690867.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:07.894Z,1516690867.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:08.290Z,1516690868.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:08.681Z,1516690868.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:09.081Z,1516690869.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:09.490Z,1516690869.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:09.893Z,1516690869.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:10.290Z,1516690870.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:10.688Z,1516690870.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:11.092Z,1516690871.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:11.490Z,1516690871.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:11.894Z,1516690871.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:12.320Z,1516690872.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:12.700Z,1516690872.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:13.088Z,1516690873.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:13.493Z,1516690873.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:13.898Z,1516690873.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:14.302Z,1516690874.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:14.688Z,1516690874.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:15.087Z,1516690875.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:15.497Z,1516690875.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:15.892Z,1516690875.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:16.297Z,1516690876.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:16.689Z,1516690876.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:17.091Z,1516690877.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:17.497Z,1516690877.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:17.894Z,1516690877.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:18.293Z,1516690878.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:18.689Z,1516690878.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:19.086Z,1516690879.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:19.501Z,1516690879.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:19.897Z,1516690879.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:20.294Z,1516690880.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:20.698Z,1516690880.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:21.087Z,1516690881.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:21.497Z,1516690881.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:21.897Z,1516690881.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:22.297Z,1516690882.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:22.696Z,1516690882.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:23.090Z,1516690883.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:23.497Z,1516690883.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:23.901Z,1516690883.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:24.298Z,1516690884.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:24.689Z,1516690884.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:25.089Z,1516690885.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:25.505Z,1516690885.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:25.905Z,1516690885.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:26.297Z,1516690886.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:26.698Z,1516690886.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:27.097Z,1516690887.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:27.502Z,1516690887.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:27.902Z,1516690887.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:28.298Z,1516690888.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:28.691Z,1516690888.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:29.103Z,1516690889.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:29.498Z,1516690889.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:29.901Z,1516690889.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:30.298Z,1516690890.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:30.693Z,1516690890.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:31.089Z,1516690891.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:31.506Z,1516690891.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:31.906Z,1516690891.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:32.298Z,1516690892.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:32.697Z,1516690892.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:33.096Z,1516690893.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:33.489Z,1516690893.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:33.903Z,1516690893.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:34.302Z,1516690894.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:34.705Z,1516690894.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:35.091Z,1516690895.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:35.493Z,1516690895.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:35.897Z,1516690895.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:36.297Z,1516690896.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:39.423Z,1516690899.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:39.592Z,1516690899.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:39.926Z,1516690899.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:40.329Z,1516690900.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:40.724Z,1516690900.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:41.121Z,1516690901.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:41.526Z,1516690901.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:41.933Z,1516690901.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:42.327Z,1516690902.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:42.722Z,1516690902.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:43.126Z,1516690903.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:43.526Z,1516690903.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:43.926Z,1516690903.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:44.329Z,1516690904.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:44.721Z,1516690904.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:45.120Z,1516690905.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:45.537Z,1516690905.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:45.936Z,1516690905.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:46.333Z,1516690906.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:46.737Z,1516690906.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:47.124Z,1516690907.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:47.530Z,1516690907.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:47.932Z,1516690907.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:48.329Z,1516690908.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:48.725Z,1516690908.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:49.129Z,1516690909.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:49.540Z,1516690909.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:49.937Z,1516690909.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:50.337Z,1516690910.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:50.724Z,1516690910.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:51.129Z,1516690911.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:51.529Z,1516690911.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:51.933Z,1516690911.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:52.334Z,1516690912.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:52.721Z,1516690912.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:53.129Z,1516690913.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:53.541Z,1516690913.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:53.937Z,1516690913.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:54.330Z,1516690914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:54.722Z,1516690914.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:55.121Z,1516690915.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:55.521Z,1516690915.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:55.931Z,1516690915.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:56.333Z,1516690916.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:56.739Z,1516690916.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:57.133Z,1516690917.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:57.528Z,1516690917.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:57.928Z,1516690917.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:58.329Z,1516690918.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:58.730Z,1516690918.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:59.134Z,1516690919.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:59.530Z,1516690919.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:01:59.925Z,1516690919.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:00.322Z,1516690920.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:00.729Z,1516690920.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:01.122Z,1516690921.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:01.530Z,1516690921.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:01.933Z,1516690921.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:02.334Z,1516690922.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:02.739Z,1516690922.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:03.129Z,1516690923.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:03.527Z,1516690923.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:03.932Z,1516690923.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:04.329Z,1516690924.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:04.730Z,1516690924.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:05.137Z,1516690925.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:05.533Z,1516690925.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:05.927Z,1516690925.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:06.322Z,1516690926.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:06.729Z,1516690926.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:07.127Z,1516690927.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:07.528Z,1516690927.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:07.930Z,1516690927.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:08.334Z,1516690928.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:08.740Z,1516690928.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:09.129Z,1516690929.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:09.529Z,1516690929.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:09.924Z,1516690929.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:10.324Z,1516690930.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:10.732Z,1516690930.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:11.134Z,1516690931.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:11.537Z,1516690931.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:11.924Z,1516690931.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:12.323Z,1516690932.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:12.726Z,1516690932.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:13.121Z,1516690933.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:13.530Z,1516690933.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:13.931Z,1516690933.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:14.333Z,1516690934.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:14.738Z,1516690934.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:15.125Z,1516690935.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:15.521Z,1516690935.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:15.933Z,1516690935.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:16.328Z,1516690936.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:16.734Z,1516690936.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:17.135Z,1516690937.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:17.537Z,1516690937.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:17.933Z,1516690937.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:18.325Z,1516690938.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:18.722Z,1516690938.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:19.128Z,1516690939.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:19.532Z,1516690939.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:19.941Z,1516690939.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:20.335Z,1516690940.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:20.737Z,1516690940.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:21.126Z,1516690941.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:21.525Z,1516690941.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:21.925Z,1516690941.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:22.328Z,1516690942.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:22.735Z,1516690942.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:23.137Z,1516690943.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:23.532Z,1516690943.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:23.928Z,1516690943.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:24.325Z,1516690944.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:24.722Z,1516690944.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:25.131Z,1516690945.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:25.532Z,1516690945.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:25.931Z,1516690945.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:26.337Z,1516690946.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:26.732Z,1516690946.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:27.128Z,1516690947.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:27.528Z,1516690947.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:27.933Z,1516690947.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:28.349Z,1516690948.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:28.734Z,1516690948.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:29.134Z,1516690949.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:29.531Z,1516690949.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:29.929Z,1516690949.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:30.333Z,1516690950.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:30.709Z,1516690950.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:31.135Z,1516690951.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:31.540Z,1516690951.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:31.932Z,1516690951.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:32.347Z,1516690952.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:32.744Z,1516690952.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:33.121Z,1516690953.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:33.517Z,1516690953.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:33.926Z,1516690953.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:34.321Z,1516690954.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:34.750Z,1516690954.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:35.133Z,1516690955.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:35.522Z,1516690955.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:35.924Z,1516690955.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:36.321Z,1516690956.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:39.433Z,1516690959.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:39.560Z,1516690959.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:39.934Z,1516690959.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:40.350Z,1516690960.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:40.762Z,1516690960.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:41.125Z,1516690961.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:41.525Z,1516690961.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:41.926Z,1516690961.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:42.332Z,1516690962.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:42.734Z,1516690962.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:43.134Z,1516690963.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:43.537Z,1516690963.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:43.929Z,1516690963.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:44.333Z,1516690964.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:44.727Z,1516690964.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:45.128Z,1516690965.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:45.533Z,1516690965.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:45.946Z,1516690965.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:46.334Z,1516690966.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:46.746Z,1516690966.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:47.133Z,1516690967.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:47.531Z,1516690967.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:47.930Z,1516690967.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:48.327Z,1516690968.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:48.739Z,1516690968.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:49.145Z,1516690969.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:49.539Z,1516690969.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:49.933Z,1516690969.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:50.330Z,1516690970.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:50.732Z,1516690970.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:51.136Z,1516690971.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:51.533Z,1516690971.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:51.938Z,1516690971.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:52.338Z,1516690972.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:52.771Z,1516690972.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:53.135Z,1516690973.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:53.530Z,1516690973.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:53.933Z,1516690973.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:54.337Z,1516690974.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:54.744Z,1516690974.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:55.147Z,1516690975.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:55.538Z,1516690975.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:55.942Z,1516690975.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:56.338Z,1516690976.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:56.742Z,1516690976.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:57.138Z,1516690977.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:57.534Z,1516690977.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:57.947Z,1516690977.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:58.344Z,1516690978.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:58.749Z,1516690978.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:59.148Z,1516690979.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:59.521Z,1516690979.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:02:59.952Z,1516690979.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:00.314Z,1516690980.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x3948 got:0x60445 2018-01-23T07:03:00.352Z,1516690980.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:00.741Z,1516690980.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:01.155Z,1516690981.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:01.561Z,1516690981.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:01.929Z,1516690981.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:02.357Z,1516690982.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:02.728Z,1516690982.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:03.133Z,1516690983.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:03.535Z,1516690983.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:03.945Z,1516690983.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:04.337Z,1516690984.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:04.740Z,1516690984.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:05.130Z,1516690985.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:05.531Z,1516690985.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:05.932Z,1516690985.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:06.337Z,1516690986.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:06.732Z,1516690986.732 [PNI_TCM](ERROR): CRC does not match. Expected:0x35413 got:0x24089 2018-01-23T07:03:06.766Z,1516690986.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:07.140Z,1516690987.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:07.541Z,1516690987.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:07.960Z,1516690987.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:08.322Z,1516690988.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x59386 got:0x13559 2018-01-23T07:03:08.349Z,1516690988.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:08.734Z,1516690988.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:09.136Z,1516690989.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:09.549Z,1516690989.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:09.935Z,1516690989.935 [PNI_TCM](ERROR): CRC does not match. Expected:0x4274 got:0x64609 2018-01-23T07:03:09.972Z,1516690989.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:10.342Z,1516690990.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:10.738Z,1516690990.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:11.138Z,1516690991.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:11.531Z,1516690991.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:11.945Z,1516690991.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:12.333Z,1516690992.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:12.771Z,1516690992.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:13.135Z,1516690993.135 [PNI_TCM](ERROR): CRC does not match. Expected:0x63549 got:0x15529 2018-01-23T07:03:13.176Z,1516690993.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:13.548Z,1516690993.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:13.935Z,1516690993.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:14.345Z,1516690994.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:14.734Z,1516690994.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:15.136Z,1516690995.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:15.537Z,1516690995.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:15.956Z,1516690995.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:16.334Z,1516690996.334 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T07:03:16.376Z,1516690996.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:16.751Z,1516690996.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:17.141Z,1516690997.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:17.547Z,1516690997.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:17.933Z,1516690997.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:18.338Z,1516690998.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:18.746Z,1516690998.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:19.172Z,1516690999.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:19.541Z,1516690999.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:19.946Z,1516690999.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:20.341Z,1516691000.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:20.756Z,1516691000.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:21.137Z,1516691001.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:21.532Z,1516691001.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:21.952Z,1516691001.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:22.357Z,1516691002.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:22.746Z,1516691002.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:23.134Z,1516691003.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:23.537Z,1516691003.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:23.933Z,1516691003.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:24.338Z,1516691004.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:24.748Z,1516691004.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:25.150Z,1516691005.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:25.565Z,1516691005.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:25.941Z,1516691005.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:26.325Z,1516691006.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:26.752Z,1516691006.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:27.129Z,1516691007.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:27.537Z,1516691007.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:27.932Z,1516691007.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:28.338Z,1516691008.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:28.731Z,1516691008.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:29.127Z,1516691009.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:29.528Z,1516691009.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:29.928Z,1516691009.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:30.329Z,1516691010.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:30.738Z,1516691010.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:31.140Z,1516691011.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:31.541Z,1516691011.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:31.929Z,1516691011.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:32.340Z,1516691012.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:32.739Z,1516691012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:33.146Z,1516691013.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:33.542Z,1516691013.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:33.936Z,1516691013.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:34.339Z,1516691014.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:34.749Z,1516691014.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:35.161Z,1516691015.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:35.549Z,1516691015.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:35.921Z,1516691015.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:36.321Z,1516691016.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:36.321Z,1516691016.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-01-23T07:03:36.321Z,1516691016.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:03:36.323Z,1516691016.323 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:36.323Z,1516691016.323 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-01-23T07:03:36.323Z,1516691016.323 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:03:36.325Z,1516691016.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:36.325Z,1516691016.325 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76 2018-01-23T07:03:36.325Z,1516691016.325 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:03:36.358Z,1516691016.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:03:36.358Z,1516691016.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:03:36.358Z,1516691016.358 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:03:39.465Z,1516691019.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:03:39.465Z,1516691019.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-01-23T07:03:39.465Z,1516691019.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:03:39.465Z,1516691019.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-01-23T07:03:39.466Z,1516691019.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:03:39.466Z,1516691019.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76 2018-01-23T07:03:39.576Z,1516691019.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:03:39.577Z,1516691019.577 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:03:39.577Z,1516691019.577 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:03:39.577Z,1516691019.577 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:03:39.578Z,1516691019.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:03:39.578Z,1516691019.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:03:39.579Z,1516691019.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:03:39.579Z,1516691019.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:03:39.580Z,1516691019.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:03:39.947Z,1516691019.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:03:39.948Z,1516691019.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:40.328Z,1516691020.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:03:40.329Z,1516691020.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:40.725Z,1516691020.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:03:40.725Z,1516691020.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:41.134Z,1516691021.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:03:41.136Z,1516691021.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:41.527Z,1516691021.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:03:41.528Z,1516691021.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:41.936Z,1516691021.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:03:41.937Z,1516691021.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:42.334Z,1516691022.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:03:42.335Z,1516691022.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:42.733Z,1516691022.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:03:42.734Z,1516691022.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:43.124Z,1516691023.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:03:43.125Z,1516691023.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:43.524Z,1516691023.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:03:43.525Z,1516691023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:43.924Z,1516691023.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:03:43.925Z,1516691023.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:44.324Z,1516691024.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:03:44.325Z,1516691024.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:44.734Z,1516691024.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:03:44.735Z,1516691024.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:45.140Z,1516691025.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:03:45.141Z,1516691025.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:45.533Z,1516691025.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:03:45.534Z,1516691025.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:45.925Z,1516691025.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:03:45.926Z,1516691025.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:46.328Z,1516691026.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:03:46.329Z,1516691026.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:46.733Z,1516691026.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:03:46.734Z,1516691026.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:47.136Z,1516691027.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:03:47.137Z,1516691027.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:47.534Z,1516691027.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:03:47.535Z,1516691027.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:47.925Z,1516691027.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:03:47.926Z,1516691027.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:48.333Z,1516691028.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:03:48.334Z,1516691028.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:48.733Z,1516691028.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:03:48.734Z,1516691028.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:49.140Z,1516691029.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:03:49.141Z,1516691029.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:49.533Z,1516691029.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:03:49.534Z,1516691029.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:49.926Z,1516691029.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:03:49.927Z,1516691029.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:50.331Z,1516691030.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:03:50.332Z,1516691030.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:50.734Z,1516691030.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:03:50.735Z,1516691030.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:51.137Z,1516691031.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:03:51.138Z,1516691031.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:51.534Z,1516691031.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:03:51.535Z,1516691031.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:51.925Z,1516691031.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:03:51.926Z,1516691031.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:52.335Z,1516691032.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:03:52.336Z,1516691032.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:52.734Z,1516691032.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:03:52.735Z,1516691032.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:53.137Z,1516691033.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:03:53.138Z,1516691033.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:53.544Z,1516691033.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:03:53.545Z,1516691033.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:53.915Z,1516691033.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:03:53.916Z,1516691033.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:54.316Z,1516691034.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:03:54.317Z,1516691034.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:54.746Z,1516691034.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:03:54.747Z,1516691034.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:55.148Z,1516691035.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:03:55.149Z,1516691035.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:55.548Z,1516691035.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:03:55.549Z,1516691035.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:55.919Z,1516691035.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:03:55.920Z,1516691035.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:56.325Z,1516691036.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:56.730Z,1516691036.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:57.157Z,1516691037.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:57.526Z,1516691037.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:57.922Z,1516691037.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:58.325Z,1516691038.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:58.726Z,1516691038.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:59.130Z,1516691039.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:59.526Z,1516691039.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:03:59.922Z,1516691039.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:00.324Z,1516691040.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:00.726Z,1516691040.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:01.126Z,1516691041.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:01.526Z,1516691041.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:01.930Z,1516691041.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:02.325Z,1516691042.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:02.733Z,1516691042.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:03.134Z,1516691043.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:03.533Z,1516691043.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:03.925Z,1516691043.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:04.329Z,1516691044.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:04.730Z,1516691044.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:05.134Z,1516691045.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:05.552Z,1516691045.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:05.933Z,1516691045.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:06.329Z,1516691046.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:06.726Z,1516691046.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:07.134Z,1516691047.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:07.545Z,1516691047.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:07.945Z,1516691047.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:08.334Z,1516691048.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:08.732Z,1516691048.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:09.132Z,1516691049.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:09.533Z,1516691049.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:09.934Z,1516691049.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:10.349Z,1516691050.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:10.745Z,1516691050.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:11.137Z,1516691051.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:11.541Z,1516691051.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:11.925Z,1516691051.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:12.322Z,1516691052.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:12.728Z,1516691052.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:13.126Z,1516691053.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:13.530Z,1516691053.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:13.955Z,1516691053.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:14.329Z,1516691054.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:14.726Z,1516691054.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:15.128Z,1516691055.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:15.524Z,1516691055.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:15.927Z,1516691055.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:16.331Z,1516691056.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:16.727Z,1516691056.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:16.756Z,1516691056.756 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:04:17.123Z,1516691057.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:17.525Z,1516691057.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:17.929Z,1516691057.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:18.326Z,1516691058.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:18.725Z,1516691058.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:19.133Z,1516691059.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:19.535Z,1516691059.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:19.929Z,1516691059.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:20.323Z,1516691060.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:20.729Z,1516691060.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:21.124Z,1516691061.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:21.527Z,1516691061.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:21.933Z,1516691061.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:22.330Z,1516691062.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:22.733Z,1516691062.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:23.127Z,1516691063.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:23.523Z,1516691063.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:23.925Z,1516691063.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:24.332Z,1516691064.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:24.728Z,1516691064.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:25.133Z,1516691065.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:25.537Z,1516691065.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:25.940Z,1516691065.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:26.333Z,1516691066.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:26.725Z,1516691066.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:27.128Z,1516691067.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:27.533Z,1516691067.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:27.934Z,1516691067.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:28.336Z,1516691068.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:28.733Z,1516691068.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:29.125Z,1516691069.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:29.528Z,1516691069.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:29.933Z,1516691069.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:30.325Z,1516691070.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:30.728Z,1516691070.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:31.145Z,1516691071.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:31.541Z,1516691071.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:31.934Z,1516691071.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:32.325Z,1516691072.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:32.726Z,1516691072.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:33.128Z,1516691073.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:33.527Z,1516691073.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:33.941Z,1516691073.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:34.336Z,1516691074.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:34.741Z,1516691074.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:35.129Z,1516691075.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:35.524Z,1516691075.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:35.927Z,1516691075.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:35.930Z,1516691075.930 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:04:35.930Z,1516691075.930 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:04:35.930Z,1516691075.930 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:04:35.930Z,1516691075.930 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:04:36.334Z,1516691076.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:36.337Z,1516691076.337 [Default:CheckIn:D] Stopped 2018-01-23T07:04:36.337Z,1516691076.337 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:04:36.724Z,1516691076.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:36.727Z,1516691076.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 226.737956 min 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn:E] Stopped 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn] Stopped 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn](INFO): Running loop #23 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn] Running Loop=23 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:04:36.728Z,1516691076.728 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:04:39.832Z,1516691079.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:39.977Z,1516691079.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:40.321Z,1516691080.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:40.723Z,1516691080.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:41.120Z,1516691081.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:41.500Z,1516691081.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:41.933Z,1516691081.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:42.320Z,1516691082.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:42.715Z,1516691082.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:43.106Z,1516691083.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:43.509Z,1516691083.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:43.900Z,1516691083.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:44.305Z,1516691084.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:44.698Z,1516691084.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:45.110Z,1516691085.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:45.510Z,1516691085.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:45.909Z,1516691085.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:46.298Z,1516691086.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:46.717Z,1516691086.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:47.104Z,1516691087.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:47.501Z,1516691087.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:47.913Z,1516691087.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:48.321Z,1516691088.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:48.710Z,1516691088.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:49.112Z,1516691089.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:49.505Z,1516691089.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:49.908Z,1516691089.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:50.304Z,1516691090.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:50.705Z,1516691090.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:51.116Z,1516691091.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:51.517Z,1516691091.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:51.914Z,1516691091.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:52.309Z,1516691092.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:52.704Z,1516691092.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:53.093Z,1516691093.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:53.521Z,1516691093.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:53.919Z,1516691093.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:54.320Z,1516691094.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:54.722Z,1516691094.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:55.095Z,1516691095.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:55.529Z,1516691095.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:55.897Z,1516691095.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:56.304Z,1516691096.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:56.698Z,1516691096.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:57.129Z,1516691097.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:57.506Z,1516691097.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:57.902Z,1516691097.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:58.298Z,1516691098.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:58.704Z,1516691098.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:59.101Z,1516691099.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:59.501Z,1516691099.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:04:59.909Z,1516691099.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:00.310Z,1516691100.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:00.713Z,1516691100.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:01.099Z,1516691101.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:01.498Z,1516691101.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:01.911Z,1516691101.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:02.303Z,1516691102.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:02.707Z,1516691102.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:03.111Z,1516691103.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:03.514Z,1516691103.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:03.910Z,1516691103.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:04.305Z,1516691104.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:04.708Z,1516691104.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:05.105Z,1516691105.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:05.505Z,1516691105.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:05.921Z,1516691105.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:06.314Z,1516691106.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:06.711Z,1516691106.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:07.109Z,1516691107.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:07.505Z,1516691107.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:07.905Z,1516691107.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:08.308Z,1516691108.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:08.701Z,1516691108.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:09.111Z,1516691109.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:09.520Z,1516691109.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:09.921Z,1516691109.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:10.309Z,1516691110.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:10.708Z,1516691110.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:11.105Z,1516691111.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:11.509Z,1516691111.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:11.913Z,1516691111.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:12.318Z,1516691112.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:12.710Z,1516691112.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:13.108Z,1516691113.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:13.505Z,1516691113.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:13.905Z,1516691113.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:14.308Z,1516691114.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:14.709Z,1516691114.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:15.110Z,1516691115.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:15.520Z,1516691115.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:15.910Z,1516691115.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:16.305Z,1516691116.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:16.708Z,1516691116.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:17.106Z,1516691117.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:17.505Z,1516691117.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:17.924Z,1516691117.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:18.314Z,1516691118.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:18.712Z,1516691118.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:19.111Z,1516691119.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:19.513Z,1516691119.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:19.908Z,1516691119.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:20.312Z,1516691120.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:20.706Z,1516691120.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:21.113Z,1516691121.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:21.518Z,1516691121.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:21.913Z,1516691121.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:22.302Z,1516691122.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:22.709Z,1516691122.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:23.108Z,1516691123.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:23.508Z,1516691123.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:23.912Z,1516691123.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:24.321Z,1516691124.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:24.714Z,1516691124.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:25.111Z,1516691125.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:25.505Z,1516691125.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:25.860Z,1516691125.860 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T07:05:25.860Z,1516691125.860 [NAL9602] Data Fault, FailCount= 1 2018-01-23T07:05:25.860Z,1516691125.860 [NAL9602](ERROR): Data Fault 2018-01-23T07:05:25.912Z,1516691125.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:25.934Z,1516691125.934 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T07:05:26.260Z,1516691126.260 [NAL9602](INFO): Powering down 2018-01-23T07:05:26.312Z,1516691126.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:26.713Z,1516691126.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:27.111Z,1516691127.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:27.124Z,1516691127.124 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T07:05:27.124Z,1516691127.124 [NAL9602] No Fault, FailCount= 1 2018-01-23T07:05:27.511Z,1516691127.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:27.911Z,1516691127.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:28.311Z,1516691128.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:28.711Z,1516691128.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:29.111Z,1516691129.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:29.511Z,1516691129.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:29.912Z,1516691129.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:30.313Z,1516691130.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:30.715Z,1516691130.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:31.120Z,1516691131.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:31.489Z,1516691131.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:31.892Z,1516691131.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:32.376Z,1516691132.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:32.693Z,1516691132.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:33.126Z,1516691133.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:33.556Z,1516691133.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:33.909Z,1516691133.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:34.340Z,1516691134.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:34.755Z,1516691134.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:35.096Z,1516691135.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:35.509Z,1516691135.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:35.898Z,1516691135.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:36.322Z,1516691136.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:36.715Z,1516691136.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:37.117Z,1516691137.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:43.725Z,1516691143.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:43.901Z,1516691143.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:44.264Z,1516691144.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:44.627Z,1516691144.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:45.028Z,1516691145.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:45.427Z,1516691145.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:45.824Z,1516691145.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:46.253Z,1516691146.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:46.634Z,1516691146.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:47.031Z,1516691147.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:47.429Z,1516691147.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:47.828Z,1516691147.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:48.228Z,1516691148.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:48.633Z,1516691148.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:49.030Z,1516691149.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:49.428Z,1516691149.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:49.857Z,1516691149.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:50.229Z,1516691150.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:50.629Z,1516691150.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:51.037Z,1516691151.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:51.432Z,1516691151.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:51.828Z,1516691151.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:52.237Z,1516691152.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:52.631Z,1516691152.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:53.033Z,1516691153.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:53.441Z,1516691153.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:53.835Z,1516691153.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:54.234Z,1516691154.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:54.641Z,1516691154.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:55.031Z,1516691155.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:55.428Z,1516691155.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:55.831Z,1516691155.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:56.234Z,1516691156.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:56.592Z,1516691156.592 [NAL9602](INFO): Powering up NAL9602 2018-01-23T07:05:56.636Z,1516691156.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:57.041Z,1516691157.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:57.431Z,1516691157.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:57.836Z,1516691157.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:58.237Z,1516691158.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:58.631Z,1516691158.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:59.030Z,1516691159.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:59.436Z,1516691159.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:05:59.833Z,1516691159.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:00.232Z,1516691160.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:00.630Z,1516691160.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:01.031Z,1516691161.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:01.433Z,1516691161.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:01.837Z,1516691161.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:02.231Z,1516691162.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:02.633Z,1516691162.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:03.039Z,1516691163.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:03.432Z,1516691163.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:03.833Z,1516691163.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:04.236Z,1516691164.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:04.636Z,1516691164.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:05.037Z,1516691165.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:05.434Z,1516691165.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:05.834Z,1516691165.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:06.236Z,1516691166.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:06.637Z,1516691166.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:07.078Z,1516691167.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:07.396Z,1516691167.396 [NAL9602](INFO): NAL9602 initialized 2018-01-23T07:06:07.444Z,1516691167.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:07.849Z,1516691167.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:08.248Z,1516691168.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:08.654Z,1516691168.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:09.047Z,1516691169.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:09.445Z,1516691169.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:09.883Z,1516691169.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:10.239Z,1516691170.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:10.649Z,1516691170.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:11.046Z,1516691171.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:11.461Z,1516691171.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:11.838Z,1516691171.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:12.245Z,1516691172.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:12.644Z,1516691172.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:13.044Z,1516691173.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:13.468Z,1516691173.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:13.860Z,1516691173.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:14.247Z,1516691174.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:14.639Z,1516691174.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:15.043Z,1516691175.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:15.433Z,1516691175.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:15.840Z,1516691175.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:16.244Z,1516691176.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:16.649Z,1516691176.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:17.049Z,1516691177.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:17.446Z,1516691177.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:17.842Z,1516691177.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:18.245Z,1516691178.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:18.648Z,1516691178.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:19.019Z,1516691179.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x59943 got:0x58700 2018-01-23T07:06:19.048Z,1516691179.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:19.444Z,1516691179.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:19.850Z,1516691179.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:20.254Z,1516691180.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:20.646Z,1516691180.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:21.018Z,1516691181.018 [PNI_TCM](ERROR): CRC does not match. Expected:0x16392 got:0x49716 2018-01-23T07:06:21.051Z,1516691181.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:21.444Z,1516691181.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:21.841Z,1516691181.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:22.218Z,1516691182.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T07:06:22.252Z,1516691182.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:22.636Z,1516691182.636 [PNI_TCM](ERROR): CRC does not match. Expected:0x27281 got:0x49716 2018-01-23T07:06:22.664Z,1516691182.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:23.046Z,1516691183.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:23.458Z,1516691183.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:23.844Z,1516691183.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:24.222Z,1516691184.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x19490 got:0x16910 2018-01-23T07:06:24.249Z,1516691184.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:24.642Z,1516691184.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:25.052Z,1516691185.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:25.450Z,1516691185.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:25.861Z,1516691185.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:26.260Z,1516691186.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:26.656Z,1516691186.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:27.046Z,1516691187.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:27.430Z,1516691187.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:27.829Z,1516691187.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:28.260Z,1516691188.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:28.658Z,1516691188.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:29.055Z,1516691189.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:29.465Z,1516691189.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:29.868Z,1516691189.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:30.234Z,1516691190.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:30.635Z,1516691190.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:31.043Z,1516691191.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:31.458Z,1516691191.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:31.842Z,1516691191.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:32.265Z,1516691192.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:32.633Z,1516691192.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:33.056Z,1516691193.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:33.437Z,1516691193.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:33.835Z,1516691193.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:34.233Z,1516691194.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:34.660Z,1516691194.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:35.042Z,1516691195.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:35.440Z,1516691195.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:35.836Z,1516691195.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:36.259Z,1516691196.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:36.637Z,1516691196.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:37.039Z,1516691197.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:37.449Z,1516691197.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:40.538Z,1516691200.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:40.538Z,1516691200.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-01-23T07:06:40.538Z,1516691200.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:06:40.540Z,1516691200.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:40.540Z,1516691200.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-01-23T07:06:40.540Z,1516691200.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:06:40.542Z,1516691200.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:40.542Z,1516691200.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77 2018-01-23T07:06:40.542Z,1516691200.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:06:40.554Z,1516691200.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:06:40.583Z,1516691200.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:06:40.583Z,1516691200.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:06:40.712Z,1516691200.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:06:40.712Z,1516691200.712 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-01-23T07:06:40.712Z,1516691200.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:06:40.712Z,1516691200.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-01-23T07:06:40.713Z,1516691200.713 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:06:40.713Z,1516691200.713 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77 2018-01-23T07:06:41.059Z,1516691201.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:06:41.060Z,1516691201.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:06:41.060Z,1516691201.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:06:41.060Z,1516691201.060 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:06:41.061Z,1516691201.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:06:41.061Z,1516691201.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:06:41.062Z,1516691201.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:06:41.062Z,1516691201.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:06:41.062Z,1516691201.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:06:41.441Z,1516691201.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T07:06:41.451Z,1516691201.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:41.841Z,1516691201.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T07:06:41.842Z,1516691201.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:42.247Z,1516691202.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T07:06:42.248Z,1516691202.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:42.672Z,1516691202.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T07:06:42.673Z,1516691202.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:43.065Z,1516691203.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T07:06:43.066Z,1516691203.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:43.442Z,1516691203.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T07:06:43.444Z,1516691203.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:43.840Z,1516691203.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T07:06:43.841Z,1516691203.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:44.235Z,1516691204.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T07:06:44.236Z,1516691204.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:44.641Z,1516691204.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T07:06:44.642Z,1516691204.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:45.037Z,1516691205.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T07:06:45.039Z,1516691205.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:45.444Z,1516691205.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T07:06:45.445Z,1516691205.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:45.871Z,1516691205.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T07:06:45.872Z,1516691205.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:46.275Z,1516691206.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T07:06:46.276Z,1516691206.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:46.642Z,1516691206.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T07:06:46.644Z,1516691206.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:47.049Z,1516691207.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T07:06:47.050Z,1516691207.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:47.445Z,1516691207.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T07:06:47.446Z,1516691207.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:47.843Z,1516691207.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T07:06:47.844Z,1516691207.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:48.240Z,1516691208.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T07:06:48.242Z,1516691208.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:48.661Z,1516691208.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T07:06:48.662Z,1516691208.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:49.050Z,1516691209.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T07:06:49.051Z,1516691209.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:49.445Z,1516691209.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T07:06:49.446Z,1516691209.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:49.845Z,1516691209.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T07:06:49.847Z,1516691209.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:50.245Z,1516691210.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T07:06:50.246Z,1516691210.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:50.643Z,1516691210.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T07:06:50.644Z,1516691210.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:51.044Z,1516691211.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T07:06:51.045Z,1516691211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:51.446Z,1516691211.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T07:06:51.448Z,1516691211.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:51.853Z,1516691211.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T07:06:51.854Z,1516691211.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:52.256Z,1516691212.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T07:06:52.257Z,1516691212.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:52.637Z,1516691212.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T07:06:52.637Z,1516691212.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:53.042Z,1516691213.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T07:06:53.043Z,1516691213.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:53.452Z,1516691213.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T07:06:53.453Z,1516691213.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:53.841Z,1516691213.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T07:06:53.842Z,1516691213.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:54.242Z,1516691214.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T07:06:54.244Z,1516691214.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:54.650Z,1516691214.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T07:06:54.651Z,1516691214.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:55.054Z,1516691215.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T07:06:55.055Z,1516691215.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:55.448Z,1516691215.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T07:06:55.449Z,1516691215.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:55.848Z,1516691215.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T07:06:55.848Z,1516691215.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:56.244Z,1516691216.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T07:06:56.245Z,1516691216.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:56.640Z,1516691216.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T07:06:56.641Z,1516691216.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:57.026Z,1516691217.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T07:06:57.051Z,1516691217.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:57.447Z,1516691217.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T07:06:57.448Z,1516691217.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:57.853Z,1516691217.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T07:06:57.854Z,1516691217.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:58.260Z,1516691218.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T07:06:58.261Z,1516691218.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:58.625Z,1516691218.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T07:06:58.626Z,1516691218.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:59.032Z,1516691219.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T07:06:59.033Z,1516691219.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:59.434Z,1516691219.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T07:06:59.435Z,1516691219.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:06:59.868Z,1516691219.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T07:06:59.869Z,1516691219.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:00.260Z,1516691220.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T07:07:00.261Z,1516691220.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:00.663Z,1516691220.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:01.068Z,1516691221.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:01.469Z,1516691221.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:01.831Z,1516691221.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:02.261Z,1516691222.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:02.637Z,1516691222.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:03.034Z,1516691223.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:03.446Z,1516691223.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:03.849Z,1516691223.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:04.248Z,1516691224.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:04.634Z,1516691224.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:05.044Z,1516691225.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:05.436Z,1516691225.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:05.837Z,1516691225.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:06.235Z,1516691226.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:06.648Z,1516691226.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:07.046Z,1516691227.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:07.445Z,1516691227.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:07.840Z,1516691227.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:08.237Z,1516691228.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:08.638Z,1516691228.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:09.037Z,1516691229.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:09.449Z,1516691229.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:09.846Z,1516691229.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:10.248Z,1516691230.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:10.644Z,1516691230.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:11.039Z,1516691231.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:11.437Z,1516691231.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:11.838Z,1516691231.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:12.236Z,1516691232.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:12.652Z,1516691232.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:13.046Z,1516691233.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:13.445Z,1516691233.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:13.836Z,1516691233.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:14.236Z,1516691234.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:14.649Z,1516691234.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:15.040Z,1516691235.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:15.465Z,1516691235.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:15.843Z,1516691235.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:16.245Z,1516691236.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:16.635Z,1516691236.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:17.038Z,1516691237.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:17.440Z,1516691237.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:17.839Z,1516691237.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:18.246Z,1516691238.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:18.648Z,1516691238.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:19.061Z,1516691239.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:19.453Z,1516691239.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:19.840Z,1516691239.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:20.244Z,1516691240.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:20.644Z,1516691240.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:21.048Z,1516691241.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:21.450Z,1516691241.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:21.861Z,1516691241.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:22.257Z,1516691242.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:22.638Z,1516691242.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:23.052Z,1516691243.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:23.441Z,1516691243.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:23.843Z,1516691243.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:24.246Z,1516691244.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:24.654Z,1516691244.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:25.055Z,1516691245.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:25.459Z,1516691245.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:25.838Z,1516691245.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:26.241Z,1516691246.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:26.644Z,1516691246.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:27.042Z,1516691247.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:27.449Z,1516691247.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:27.873Z,1516691247.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:28.253Z,1516691248.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:28.653Z,1516691248.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:29.057Z,1516691249.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:29.435Z,1516691249.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:29.837Z,1516691249.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:30.237Z,1516691250.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:30.658Z,1516691250.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:31.061Z,1516691251.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:31.442Z,1516691251.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:31.835Z,1516691251.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:32.235Z,1516691252.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:32.636Z,1516691252.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:33.041Z,1516691253.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:33.438Z,1516691253.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:33.842Z,1516691253.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:34.245Z,1516691254.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:34.633Z,1516691254.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:35.045Z,1516691255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:35.440Z,1516691255.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:35.840Z,1516691255.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:36.234Z,1516691256.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:36.653Z,1516691256.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:37.053Z,1516691257.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:37.445Z,1516691257.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:40.535Z,1516691260.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:40.673Z,1516691260.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:41.006Z,1516691261.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:41.429Z,1516691261.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:41.806Z,1516691261.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:42.205Z,1516691262.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:42.604Z,1516691262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:42.999Z,1516691262.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:43.426Z,1516691263.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:43.806Z,1516691263.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:44.203Z,1516691264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:44.609Z,1516691264.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:45.005Z,1516691265.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:45.405Z,1516691265.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:45.807Z,1516691265.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:46.213Z,1516691266.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:46.601Z,1516691266.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:47.000Z,1516691267.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:47.413Z,1516691267.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:47.807Z,1516691267.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:48.209Z,1516691268.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:48.606Z,1516691268.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:48.000Z,1516691269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:49.409Z,1516691269.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:49.810Z,1516691269.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:50.206Z,1516691270.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:50.604Z,1516691270.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:51.001Z,1516691271.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:51.401Z,1516691271.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:51.817Z,1516691271.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:52.221Z,1516691272.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:52.610Z,1516691272.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:52.000Z,1516691273.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:53.406Z,1516691273.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:53.805Z,1516691273.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:54.209Z,1516691274.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:54.626Z,1516691274.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:55.015Z,1516691275.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:55.419Z,1516691275.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:55.809Z,1516691275.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:56.206Z,1516691276.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:56.609Z,1516691276.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:57.012Z,1516691277.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:57.412Z,1516691277.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:57.824Z,1516691277.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:58.221Z,1516691278.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:58.625Z,1516691278.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:59.001Z,1516691279.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:59.396Z,1516691279.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:07:59.797Z,1516691279.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:00.199Z,1516691280.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:00.606Z,1516691280.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:01.030Z,1516691281.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:01.414Z,1516691281.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:01.800Z,1516691281.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:02.205Z,1516691282.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:02.599Z,1516691282.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:03.013Z,1516691283.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:03.404Z,1516691283.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:03.809Z,1516691283.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:04.205Z,1516691284.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:04.609Z,1516691284.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:05.003Z,1516691285.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:05.400Z,1516691285.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:05.801Z,1516691285.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:06.199Z,1516691286.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:06.605Z,1516691286.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:07.010Z,1516691287.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:07.409Z,1516691287.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:07.803Z,1516691287.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:08.203Z,1516691288.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:08.599Z,1516691288.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:09.008Z,1516691289.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:09.403Z,1516691289.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:09.809Z,1516691289.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:10.204Z,1516691290.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:10.606Z,1516691290.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:10.999Z,1516691290.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:11.404Z,1516691291.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:11.809Z,1516691291.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:12.203Z,1516691292.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:12.617Z,1516691292.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:13.013Z,1516691293.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:13.409Z,1516691293.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:13.803Z,1516691293.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:14.201Z,1516691294.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:14.601Z,1516691294.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:15.009Z,1516691295.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:15.401Z,1516691295.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:15.809Z,1516691295.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:16.213Z,1516691296.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:16.609Z,1516691296.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:17.001Z,1516691297.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:17.400Z,1516691297.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:17.803Z,1516691297.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:18.201Z,1516691298.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:18.610Z,1516691298.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:19.013Z,1516691299.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:19.417Z,1516691299.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:19.803Z,1516691299.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:20.204Z,1516691300.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:20.605Z,1516691300.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:21.008Z,1516691301.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:21.404Z,1516691301.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:21.811Z,1516691301.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:22.214Z,1516691302.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:22.613Z,1516691302.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:23.005Z,1516691303.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:23.409Z,1516691303.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:23.804Z,1516691303.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:24.211Z,1516691304.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:24.613Z,1516691304.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:25.017Z,1516691305.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:25.413Z,1516691305.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:25.804Z,1516691305.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:26.204Z,1516691306.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:26.602Z,1516691306.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:27.017Z,1516691307.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:27.408Z,1516691307.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:27.810Z,1516691307.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:28.214Z,1516691308.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:28.610Z,1516691308.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:29.013Z,1516691309.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:29.409Z,1516691309.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:29.806Z,1516691309.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:30.213Z,1516691310.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:30.616Z,1516691310.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:31.018Z,1516691311.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:31.420Z,1516691311.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:31.813Z,1516691311.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:32.211Z,1516691312.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:32.611Z,1516691312.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:33.013Z,1516691313.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:33.389Z,1516691313.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:33.821Z,1516691313.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:34.225Z,1516691314.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:34.622Z,1516691314.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:35.013Z,1516691315.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:35.392Z,1516691315.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:35.798Z,1516691315.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:36.197Z,1516691316.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:36.629Z,1516691316.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:37.023Z,1516691317.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:37.428Z,1516691317.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:37.818Z,1516691317.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:40.932Z,1516691320.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:41.073Z,1516691321.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:41.402Z,1516691321.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:41.813Z,1516691321.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:42.249Z,1516691322.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:42.604Z,1516691322.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:42.000Z,1516691323.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:43.398Z,1516691323.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:43.802Z,1516691323.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:44.205Z,1516691324.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:44.602Z,1516691324.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:45.000Z,1516691325.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:45.398Z,1516691325.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:45.800Z,1516691325.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:46.198Z,1516691326.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:46.602Z,1516691326.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:47.030Z,1516691327.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:47.402Z,1516691327.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:47.800Z,1516691327.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:48.205Z,1516691328.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:48.621Z,1516691328.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:49.001Z,1516691329.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:49.405Z,1516691329.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:49.802Z,1516691329.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:50.205Z,1516691330.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:50.614Z,1516691330.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:51.003Z,1516691331.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:51.400Z,1516691331.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:51.801Z,1516691331.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:52.199Z,1516691332.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:52.612Z,1516691332.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:53.013Z,1516691333.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:53.409Z,1516691333.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:53.803Z,1516691333.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:54.203Z,1516691334.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:54.599Z,1516691334.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:55.008Z,1516691335.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:55.404Z,1516691335.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:55.809Z,1516691335.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:56.205Z,1516691336.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:56.606Z,1516691336.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:56.999Z,1516691336.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:57.400Z,1516691337.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:57.801Z,1516691337.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:58.199Z,1516691338.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:58.612Z,1516691338.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:59.010Z,1516691339.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:59.413Z,1516691339.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:08:59.800Z,1516691339.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:00.200Z,1516691340.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:00.602Z,1516691340.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:01.001Z,1516691341.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:01.404Z,1516691341.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:01.810Z,1516691341.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:02.213Z,1516691342.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:02.617Z,1516691342.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:03.005Z,1516691343.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:03.401Z,1516691343.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:03.806Z,1516691343.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:04.207Z,1516691344.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:04.616Z,1516691344.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:05.013Z,1516691345.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:05.410Z,1516691345.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:05.805Z,1516691345.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:06.202Z,1516691346.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:06.602Z,1516691346.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:07.009Z,1516691347.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:07.409Z,1516691347.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:07.810Z,1516691347.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:08.214Z,1516691348.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:08.611Z,1516691348.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:09.008Z,1516691349.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:09.402Z,1516691349.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:09.808Z,1516691349.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:10.208Z,1516691350.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:10.611Z,1516691350.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:11.014Z,1516691351.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:11.410Z,1516691351.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:11.803Z,1516691351.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:12.208Z,1516691352.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:12.601Z,1516691352.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:13.013Z,1516691353.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:13.412Z,1516691353.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:13.818Z,1516691353.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:14.222Z,1516691354.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:14.621Z,1516691354.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:15.007Z,1516691355.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:15.408Z,1516691355.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:15.812Z,1516691355.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:16.208Z,1516691356.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:16.628Z,1516691356.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:17.014Z,1516691357.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:17.414Z,1516691357.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:17.812Z,1516691357.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:18.202Z,1516691358.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:18.609Z,1516691358.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:19.009Z,1516691359.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:19.413Z,1516691359.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:19.819Z,1516691359.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:20.221Z,1516691360.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:20.612Z,1516691360.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:21.009Z,1516691361.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:21.421Z,1516691361.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:21.806Z,1516691361.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:22.207Z,1516691362.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:22.612Z,1516691362.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:23.013Z,1516691363.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:23.410Z,1516691363.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:23.812Z,1516691363.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:24.209Z,1516691364.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:24.614Z,1516691364.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:25.014Z,1516691365.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:25.410Z,1516691365.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:25.807Z,1516691365.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:26.213Z,1516691366.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:26.611Z,1516691366.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:27.015Z,1516691367.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:27.412Z,1516691367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:27.808Z,1516691367.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:28.211Z,1516691368.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:28.621Z,1516691368.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:29.020Z,1516691369.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:29.418Z,1516691369.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:29.813Z,1516691369.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:30.211Z,1516691370.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:30.620Z,1516691370.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:31.025Z,1516691371.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:31.421Z,1516691371.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:31.804Z,1516691371.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:32.191Z,1516691372.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:32.618Z,1516691372.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:33.029Z,1516691373.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:33.427Z,1516691373.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:33.800Z,1516691373.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:34.196Z,1516691374.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:34.625Z,1516691374.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:35.022Z,1516691375.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:35.406Z,1516691375.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:35.800Z,1516691375.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:36.201Z,1516691376.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:36.606Z,1516691376.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:37.009Z,1516691377.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:37.021Z,1516691377.021 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:04:36.7Z 2018-01-23T07:09:37.021Z,1516691377.021 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T07:09:37.021Z,1516691377.021 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T07:09:37.402Z,1516691377.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:37.935Z,1516691377.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:38.201Z,1516691378.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:41.305Z,1516691381.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:41.305Z,1516691381.305 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-01-23T07:09:41.305Z,1516691381.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:09:41.307Z,1516691381.307 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:41.307Z,1516691381.307 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-01-23T07:09:41.307Z,1516691381.307 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:09:41.309Z,1516691381.309 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:41.309Z,1516691381.309 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78 2018-01-23T07:09:41.309Z,1516691381.309 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:09:41.341Z,1516691381.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:09:41.341Z,1516691381.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:09:41.342Z,1516691381.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:09:41.407Z,1516691381.407 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0092.lzma 2018-01-23T07:09:41.501Z,1516691381.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:09:41.501Z,1516691381.501 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-01-23T07:09:41.501Z,1516691381.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:09:41.501Z,1516691381.501 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-01-23T07:09:41.502Z,1516691381.502 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:09:41.502Z,1516691381.502 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78 2018-01-23T07:09:41.824Z,1516691381.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:09:41.824Z,1516691381.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:09:41.824Z,1516691381.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:09:41.825Z,1516691381.825 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:09:41.825Z,1516691381.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:09:41.826Z,1516691381.826 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:09:41.826Z,1516691381.826 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:09:41.826Z,1516691381.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:09:41.827Z,1516691381.827 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:09:42.271Z,1516691382.271 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0092.lzma.bak 2018-01-23T07:09:42.271Z,1516691382.271 [DataOverHttps](INFO): SBD MOMSN=7755185 2018-01-23T07:09:42.328Z,1516691382.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s. 2018-01-23T07:09:42.329Z,1516691382.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:42.832Z,1516691382.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s. 2018-01-23T07:09:42.833Z,1516691382.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:43.016Z,1516691383.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T07:09:43.017Z,1516691383.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:46.095Z,1516691386.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:09:46.096Z,1516691386.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:46.229Z,1516691386.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T07:09:46.230Z,1516691386.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:46.596Z,1516691386.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T07:09:46.597Z,1516691386.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:46.990Z,1516691386.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T07:09:46.991Z,1516691386.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:47.392Z,1516691387.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T07:09:47.393Z,1516691387.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:47.786Z,1516691387.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T07:09:47.787Z,1516691387.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:50.882Z,1516691390.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:09:50.883Z,1516691390.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:50.967Z,1516691390.967 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0093.lzma 2018-01-23T07:09:51.003Z,1516691391.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T07:09:51.004Z,1516691391.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:51.361Z,1516691391.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T07:09:51.362Z,1516691391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:51.705Z,1516691391.705 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0093.lzma.bak 2018-01-23T07:09:51.705Z,1516691391.705 [DataOverHttps](INFO): SBD MOMSN=7755187 2018-01-23T07:09:51.787Z,1516691391.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T07:09:51.788Z,1516691391.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:52.398Z,1516691392.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T07:09:52.399Z,1516691392.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:52.402Z,1516691392.402 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T07:09:52.402Z,1516691392.402 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T07:09:52.402Z,1516691392.402 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T07:09:52.554Z,1516691392.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:09:52.559Z,1516691392.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:55.874Z,1516691395.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s. 2018-01-23T07:09:55.891Z,1516691395.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:56.004Z,1516691396.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T07:09:56.005Z,1516691396.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:56.374Z,1516691396.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T07:09:56.375Z,1516691396.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:56.800Z,1516691396.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T07:09:56.801Z,1516691396.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:57.197Z,1516691397.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T07:09:57.198Z,1516691397.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:57.570Z,1516691397.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T07:09:57.571Z,1516691397.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:57.968Z,1516691397.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T07:09:57.969Z,1516691397.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:58.376Z,1516691398.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T07:09:58.377Z,1516691398.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:58.795Z,1516691398.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T07:09:58.796Z,1516691398.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:59.174Z,1516691399.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T07:09:59.175Z,1516691399.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:59.595Z,1516691399.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T07:09:59.596Z,1516691399.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:09:59.966Z,1516691399.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T07:09:59.968Z,1516691399.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:00.366Z,1516691400.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T07:10:00.367Z,1516691400.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:00.773Z,1516691400.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T07:10:00.774Z,1516691400.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:01.176Z,1516691401.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T07:10:01.177Z,1516691401.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:01.567Z,1516691401.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:01.974Z,1516691401.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:02.378Z,1516691402.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:02.774Z,1516691402.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:03.171Z,1516691403.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:03.577Z,1516691403.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:03.968Z,1516691403.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:04.373Z,1516691404.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:04.776Z,1516691404.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:05.172Z,1516691405.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:05.574Z,1516691405.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:05.973Z,1516691405.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:06.370Z,1516691406.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:06.773Z,1516691406.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:07.170Z,1516691407.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:07.587Z,1516691407.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:07.974Z,1516691407.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:08.374Z,1516691408.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:08.773Z,1516691408.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:09.165Z,1516691409.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:09.561Z,1516691409.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:09.986Z,1516691409.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:10.358Z,1516691410.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:10.778Z,1516691410.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:11.173Z,1516691411.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:11.570Z,1516691411.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:11.985Z,1516691411.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:12.388Z,1516691412.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:12.770Z,1516691412.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:13.168Z,1516691413.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:13.568Z,1516691413.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:13.972Z,1516691413.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:14.375Z,1516691414.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:14.800Z,1516691414.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:15.181Z,1516691415.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:15.572Z,1516691415.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:15.968Z,1516691415.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:16.366Z,1516691416.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:16.807Z,1516691416.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:17.173Z,1516691417.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:17.573Z,1516691417.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:17.973Z,1516691417.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:18.368Z,1516691418.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:18.767Z,1516691418.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:19.181Z,1516691419.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:19.571Z,1516691419.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:19.978Z,1516691419.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:20.381Z,1516691420.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:20.777Z,1516691420.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:21.173Z,1516691421.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:21.570Z,1516691421.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:21.972Z,1516691421.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:22.372Z,1516691422.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:22.777Z,1516691422.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:23.188Z,1516691423.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:23.577Z,1516691423.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:23.971Z,1516691423.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:24.373Z,1516691424.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:24.767Z,1516691424.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:25.178Z,1516691425.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:25.567Z,1516691425.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:25.985Z,1516691425.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:26.385Z,1516691426.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:26.788Z,1516691426.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:27.173Z,1516691427.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:27.570Z,1516691427.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:28.024Z,1516691428.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:28.378Z,1516691428.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:28.793Z,1516691428.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:29.200Z,1516691429.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:29.586Z,1516691429.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:30.000Z,1516691430.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:30.393Z,1516691430.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:30.773Z,1516691430.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:31.208Z,1516691431.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:31.572Z,1516691431.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:32.009Z,1516691432.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:32.388Z,1516691432.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:32.781Z,1516691432.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:33.182Z,1516691433.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:33.582Z,1516691433.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:34.033Z,1516691434.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:34.389Z,1516691434.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:34.796Z,1516691434.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:35.203Z,1516691435.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:35.597Z,1516691435.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:36.010Z,1516691436.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:36.396Z,1516691436.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:36.774Z,1516691436.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:37.181Z,1516691437.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:37.607Z,1516691437.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:37.989Z,1516691437.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:38.402Z,1516691438.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:38.836Z,1516691438.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:39.185Z,1516691439.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:39.589Z,1516691439.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:39.967Z,1516691439.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:40.365Z,1516691440.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:40.799Z,1516691440.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:41.177Z,1516691441.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:41.579Z,1516691441.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:41.970Z,1516691441.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:42.372Z,1516691442.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:42.767Z,1516691442.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:43.179Z,1516691443.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:43.572Z,1516691443.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:43.981Z,1516691443.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:44.381Z,1516691444.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:44.778Z,1516691444.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:45.169Z,1516691445.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:45.569Z,1516691445.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:45.972Z,1516691445.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:46.368Z,1516691446.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:46.777Z,1516691446.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:47.185Z,1516691447.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:47.577Z,1516691447.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:47.970Z,1516691447.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:48.372Z,1516691448.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:48.777Z,1516691448.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:49.177Z,1516691449.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:49.573Z,1516691449.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:49.985Z,1516691449.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:50.382Z,1516691450.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:50.779Z,1516691450.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:51.170Z,1516691451.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:51.579Z,1516691451.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:51.970Z,1516691451.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:52.370Z,1516691452.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:52.778Z,1516691452.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:53.182Z,1516691453.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:56.313Z,1516691456.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:56.441Z,1516691456.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:56.797Z,1516691456.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:57.201Z,1516691457.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:57.596Z,1516691457.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:58.001Z,1516691458.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:58.398Z,1516691458.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:58.802Z,1516691458.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:59.194Z,1516691459.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:10:59.594Z,1516691459.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:00.001Z,1516691460.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:00.396Z,1516691460.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:00.798Z,1516691460.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:01.202Z,1516691461.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:01.597Z,1516691461.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:01.994Z,1516691461.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:02.405Z,1516691462.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:02.800Z,1516691462.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:03.221Z,1516691463.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:03.605Z,1516691463.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:04.002Z,1516691464.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:04.402Z,1516691464.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:04.802Z,1516691464.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:05.201Z,1516691465.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:05.593Z,1516691465.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:06.023Z,1516691466.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:06.396Z,1516691466.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:06.805Z,1516691466.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:07.214Z,1516691467.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:07.614Z,1516691467.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:07.997Z,1516691467.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:08.404Z,1516691468.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:08.805Z,1516691468.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:09.202Z,1516691469.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:09.603Z,1516691469.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:10.013Z,1516691470.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:10.407Z,1516691470.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:10.811Z,1516691470.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:11.204Z,1516691471.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:11.603Z,1516691471.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:12.003Z,1516691472.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:12.406Z,1516691472.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:12.812Z,1516691472.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:13.210Z,1516691473.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:13.617Z,1516691473.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:14.004Z,1516691474.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:14.405Z,1516691474.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:14.807Z,1516691474.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:15.204Z,1516691475.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:15.604Z,1516691475.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:16.014Z,1516691476.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:16.417Z,1516691476.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:16.810Z,1516691476.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:17.212Z,1516691477.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:17.596Z,1516691477.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:17.989Z,1516691477.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:18.393Z,1516691478.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:18.819Z,1516691478.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:19.222Z,1516691479.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:19.623Z,1516691479.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:19.990Z,1516691479.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:20.417Z,1516691480.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:20.819Z,1516691480.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:21.193Z,1516691481.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:21.593Z,1516691481.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:22.022Z,1516691482.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:22.405Z,1516691482.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:22.810Z,1516691482.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:23.197Z,1516691483.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:23.596Z,1516691483.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:23.996Z,1516691483.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:24.399Z,1516691484.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:24.813Z,1516691484.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:25.205Z,1516691485.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:25.606Z,1516691485.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:25.996Z,1516691485.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:26.396Z,1516691486.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:26.796Z,1516691486.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:27.198Z,1516691487.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:27.597Z,1516691487.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:28.017Z,1516691488.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:28.417Z,1516691488.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:28.806Z,1516691488.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:29.209Z,1516691489.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:29.602Z,1516691489.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:30.005Z,1516691490.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:30.401Z,1516691490.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:30.815Z,1516691490.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:31.210Z,1516691491.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:31.611Z,1516691491.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:32.002Z,1516691492.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:32.405Z,1516691492.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:32.811Z,1516691492.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:33.211Z,1516691493.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:33.609Z,1516691493.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:34.010Z,1516691494.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:34.398Z,1516691494.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:34.813Z,1516691494.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:35.212Z,1516691495.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:35.618Z,1516691495.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:36.013Z,1516691496.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:36.410Z,1516691496.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:36.818Z,1516691496.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:37.211Z,1516691497.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:37.608Z,1516691497.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:37.000Z,1516691498.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:38.413Z,1516691498.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:38.819Z,1516691498.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:39.213Z,1516691499.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:39.610Z,1516691499.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:39.995Z,1516691499.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:40.397Z,1516691500.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:40.821Z,1516691500.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:41.223Z,1516691501.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:41.621Z,1516691501.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:41.997Z,1516691501.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:42.396Z,1516691502.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:42.825Z,1516691502.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:43.222Z,1516691503.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:43.626Z,1516691503.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:43.993Z,1516691503.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:44.395Z,1516691504.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:44.801Z,1516691504.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:45.226Z,1516691505.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:45.602Z,1516691505.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:45.995Z,1516691505.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:46.401Z,1516691506.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:46.825Z,1516691506.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:47.201Z,1516691507.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:47.625Z,1516691507.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:47.995Z,1516691507.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:48.396Z,1516691508.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:48.801Z,1516691508.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:49.202Z,1516691509.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:49.601Z,1516691509.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:49.997Z,1516691509.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:50.395Z,1516691510.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:50.801Z,1516691510.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:51.229Z,1516691511.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:51.602Z,1516691511.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:51.996Z,1516691511.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:52.401Z,1516691512.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:52.801Z,1516691512.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:53.208Z,1516691513.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:56.380Z,1516691516.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:56.530Z,1516691516.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:56.847Z,1516691516.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:57.261Z,1516691517.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:57.645Z,1516691517.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:58.053Z,1516691518.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:58.460Z,1516691518.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:58.857Z,1516691518.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:59.251Z,1516691519.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:11:59.649Z,1516691519.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:00.049Z,1516691520.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:00.447Z,1516691520.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:00.854Z,1516691520.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:01.258Z,1516691521.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:01.654Z,1516691521.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:02.052Z,1516691522.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:02.449Z,1516691522.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:02.853Z,1516691522.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:03.261Z,1516691523.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:03.653Z,1516691523.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:04.050Z,1516691524.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:04.453Z,1516691524.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:04.854Z,1516691524.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:05.255Z,1516691525.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:05.661Z,1516691525.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:06.057Z,1516691526.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:06.458Z,1516691526.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:06.859Z,1516691526.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:07.265Z,1516691527.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:07.669Z,1516691527.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:08.053Z,1516691528.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:08.457Z,1516691528.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:08.857Z,1516691528.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:09.262Z,1516691529.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:09.657Z,1516691529.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:10.049Z,1516691530.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:10.454Z,1516691530.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:10.862Z,1516691530.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:11.265Z,1516691531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:11.664Z,1516691531.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:12.055Z,1516691532.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:12.499Z,1516691532.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:12.862Z,1516691532.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:13.268Z,1516691533.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:13.667Z,1516691533.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:14.057Z,1516691534.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:14.460Z,1516691534.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:14.866Z,1516691534.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:15.274Z,1516691535.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:15.672Z,1516691535.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:16.069Z,1516691536.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:16.444Z,1516691536.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:16.871Z,1516691536.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:17.296Z,1516691537.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:17.678Z,1516691537.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:18.061Z,1516691538.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:18.457Z,1516691538.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:18.861Z,1516691538.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:19.263Z,1516691539.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:19.675Z,1516691539.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:20.057Z,1516691540.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:20.460Z,1516691540.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:20.862Z,1516691540.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:21.262Z,1516691541.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:21.660Z,1516691541.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:22.055Z,1516691542.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:22.452Z,1516691542.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:22.860Z,1516691542.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:23.269Z,1516691543.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:23.672Z,1516691543.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:24.040Z,1516691544.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:24.465Z,1516691544.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:24.870Z,1516691544.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:25.277Z,1516691545.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:25.673Z,1516691545.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:26.048Z,1516691546.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:26.473Z,1516691546.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:26.874Z,1516691546.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:27.279Z,1516691547.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:27.658Z,1516691547.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:28.049Z,1516691548.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:28.446Z,1516691548.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:28.850Z,1516691548.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:29.254Z,1516691549.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:29.681Z,1516691549.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:30.049Z,1516691550.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:30.452Z,1516691550.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:30.850Z,1516691550.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:31.262Z,1516691551.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:31.657Z,1516691551.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:32.052Z,1516691552.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:32.450Z,1516691552.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:32.857Z,1516691552.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:33.257Z,1516691553.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:33.666Z,1516691553.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:34.056Z,1516691554.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:34.452Z,1516691554.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:34.861Z,1516691554.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:35.262Z,1516691555.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:35.664Z,1516691555.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:36.055Z,1516691556.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:36.449Z,1516691556.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:36.861Z,1516691556.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:37.261Z,1516691557.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:37.669Z,1516691557.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:38.052Z,1516691558.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:38.457Z,1516691558.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:38.863Z,1516691558.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:39.268Z,1516691559.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:39.658Z,1516691559.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:40.060Z,1516691560.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:40.455Z,1516691560.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:40.861Z,1516691560.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:41.266Z,1516691561.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:41.667Z,1516691561.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:42.069Z,1516691562.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:42.070Z,1516691562.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-01-23T07:12:42.070Z,1516691562.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:12:42.072Z,1516691562.072 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:42.072Z,1516691562.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-01-23T07:12:42.072Z,1516691562.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:12:42.073Z,1516691562.073 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:42.074Z,1516691562.074 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79 2018-01-23T07:12:42.074Z,1516691562.074 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:12:42.086Z,1516691562.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:12:42.086Z,1516691562.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:12:42.086Z,1516691562.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:12:42.472Z,1516691562.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:12:42.472Z,1516691562.472 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-01-23T07:12:42.473Z,1516691562.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:12:42.473Z,1516691562.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-01-23T07:12:42.473Z,1516691562.473 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:12:42.474Z,1516691562.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79 2018-01-23T07:12:42.867Z,1516691562.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:12:42.868Z,1516691562.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:12:42.868Z,1516691562.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:12:42.869Z,1516691562.869 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:12:42.869Z,1516691562.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:12:42.869Z,1516691562.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:12:42.870Z,1516691562.870 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:12:42.870Z,1516691562.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:12:42.870Z,1516691562.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:12:43.260Z,1516691563.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:12:43.261Z,1516691563.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:43.671Z,1516691563.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:12:43.672Z,1516691563.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:44.071Z,1516691564.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:12:44.072Z,1516691564.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:44.471Z,1516691564.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:12:44.472Z,1516691564.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:44.859Z,1516691564.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:12:44.860Z,1516691564.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:45.244Z,1516691565.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:12:45.245Z,1516691565.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:45.652Z,1516691565.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:12:45.653Z,1516691565.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:46.051Z,1516691566.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:12:46.052Z,1516691566.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:46.451Z,1516691566.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:12:46.451Z,1516691566.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:46.854Z,1516691566.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:12:46.855Z,1516691566.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:47.283Z,1516691567.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:12:47.284Z,1516691567.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:47.649Z,1516691567.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:12:47.650Z,1516691567.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:48.055Z,1516691568.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:12:48.056Z,1516691568.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:48.451Z,1516691568.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:12:48.452Z,1516691568.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:48.851Z,1516691568.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:12:48.852Z,1516691568.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:49.270Z,1516691569.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:12:49.287Z,1516691569.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:49.670Z,1516691569.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:12:49.671Z,1516691569.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:50.064Z,1516691570.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:12:50.065Z,1516691570.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:50.453Z,1516691570.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:12:50.454Z,1516691570.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:50.864Z,1516691570.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:12:50.865Z,1516691570.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:51.259Z,1516691571.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:12:51.260Z,1516691571.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:51.654Z,1516691571.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:12:51.655Z,1516691571.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:52.061Z,1516691572.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:12:52.062Z,1516691572.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:52.466Z,1516691572.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:12:52.467Z,1516691572.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:52.865Z,1516691572.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:12:52.865Z,1516691572.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:53.257Z,1516691573.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:12:53.258Z,1516691573.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:56.348Z,1516691576.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T07:12:56.349Z,1516691576.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:56.469Z,1516691576.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:12:56.469Z,1516691576.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:56.842Z,1516691576.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:12:56.844Z,1516691576.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:57.221Z,1516691577.221 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T07:12:57.253Z,1516691577.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:12:57.254Z,1516691577.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:57.647Z,1516691577.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:12:57.648Z,1516691577.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:58.014Z,1516691578.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T07:12:58.015Z,1516691578.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:58.417Z,1516691578.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T07:12:58.418Z,1516691578.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:58.820Z,1516691578.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:12:58.820Z,1516691578.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:59.232Z,1516691579.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:12:59.233Z,1516691579.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:12:59.635Z,1516691579.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:12:59.636Z,1516691579.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:00.029Z,1516691580.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:13:00.030Z,1516691580.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:00.418Z,1516691580.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T07:13:00.420Z,1516691580.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:00.823Z,1516691580.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:13:00.824Z,1516691580.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:01.217Z,1516691581.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T07:13:01.218Z,1516691581.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:01.618Z,1516691581.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T07:13:01.623Z,1516691581.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:02.030Z,1516691582.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:13:02.031Z,1516691582.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:02.455Z,1516691582.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:02.838Z,1516691582.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:03.220Z,1516691583.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:03.624Z,1516691583.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:04.029Z,1516691584.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:04.423Z,1516691584.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:04.842Z,1516691584.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:05.230Z,1516691585.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:05.632Z,1516691585.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:06.036Z,1516691586.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:06.467Z,1516691586.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:06.822Z,1516691586.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:07.222Z,1516691587.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:07.625Z,1516691587.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:08.033Z,1516691588.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:08.441Z,1516691588.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:08.833Z,1516691588.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:09.228Z,1516691589.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:09.605Z,1516691589.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:10.030Z,1516691590.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:10.407Z,1516691590.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:10.809Z,1516691590.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:11.242Z,1516691591.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:11.647Z,1516691591.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:12.044Z,1516691592.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:12.441Z,1516691592.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:12.815Z,1516691592.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:13.214Z,1516691593.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:13.614Z,1516691593.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:14.021Z,1516691594.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:14.425Z,1516691594.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:14.825Z,1516691594.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:15.219Z,1516691595.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:15.614Z,1516691595.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:16.024Z,1516691596.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:16.420Z,1516691596.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:16.815Z,1516691596.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:17.225Z,1516691597.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:17.633Z,1516691597.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:18.026Z,1516691598.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:18.418Z,1516691598.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:18.816Z,1516691598.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:19.218Z,1516691599.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:19.617Z,1516691599.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:20.032Z,1516691600.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:20.427Z,1516691600.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:20.833Z,1516691600.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:21.221Z,1516691601.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:21.617Z,1516691601.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:22.022Z,1516691602.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:22.428Z,1516691602.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:22.817Z,1516691602.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:23.233Z,1516691603.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:23.637Z,1516691603.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:24.027Z,1516691604.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:24.424Z,1516691604.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:24.826Z,1516691604.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:25.223Z,1516691605.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:25.623Z,1516691605.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:26.027Z,1516691606.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:26.424Z,1516691606.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:26.836Z,1516691606.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:27.222Z,1516691607.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:27.665Z,1516691607.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:28.026Z,1516691608.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:28.428Z,1516691608.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:28.805Z,1516691608.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:29.238Z,1516691609.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:29.639Z,1516691609.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:30.029Z,1516691610.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:30.408Z,1516691610.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:30.812Z,1516691610.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:31.233Z,1516691611.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:31.637Z,1516691611.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:32.039Z,1516691612.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:32.439Z,1516691612.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:32.819Z,1516691612.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:33.217Z,1516691613.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:33.615Z,1516691613.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:34.019Z,1516691614.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:34.425Z,1516691614.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:34.818Z,1516691614.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:35.227Z,1516691615.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:35.631Z,1516691615.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:36.025Z,1516691616.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:36.460Z,1516691616.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:36.818Z,1516691616.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:37.223Z,1516691617.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:37.623Z,1516691617.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:38.026Z,1516691618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:38.429Z,1516691618.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:38.826Z,1516691618.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:39.218Z,1516691619.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:39.625Z,1516691619.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:40.025Z,1516691620.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:40.428Z,1516691620.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:40.813Z,1516691620.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:41.235Z,1516691621.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:41.637Z,1516691621.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:42.035Z,1516691622.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:42.428Z,1516691622.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:42.828Z,1516691622.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:43.227Z,1516691623.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:43.627Z,1516691623.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:44.041Z,1516691624.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:44.435Z,1516691624.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:44.835Z,1516691624.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:45.228Z,1516691625.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:45.605Z,1516691625.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:46.032Z,1516691626.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:46.415Z,1516691626.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:46.813Z,1516691626.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:47.243Z,1516691627.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:47.643Z,1516691627.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:48.022Z,1516691628.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:48.416Z,1516691628.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:48.821Z,1516691628.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:49.214Z,1516691629.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:49.616Z,1516691629.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:50.018Z,1516691630.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:50.422Z,1516691630.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:50.830Z,1516691630.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:51.224Z,1516691631.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:51.614Z,1516691631.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:52.027Z,1516691632.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:52.426Z,1516691632.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:52.814Z,1516691632.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:53.225Z,1516691633.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:53.630Z,1516691633.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:56.725Z,1516691636.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:56.857Z,1516691636.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:57.218Z,1516691637.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:57.621Z,1516691637.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:58.026Z,1516691638.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:58.430Z,1516691638.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:58.826Z,1516691638.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:59.218Z,1516691639.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:13:59.619Z,1516691639.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:00.026Z,1516691640.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:00.429Z,1516691640.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:00.830Z,1516691640.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:01.219Z,1516691641.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:01.616Z,1516691641.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:02.026Z,1516691642.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:02.431Z,1516691642.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:02.827Z,1516691642.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:03.218Z,1516691643.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:03.617Z,1516691643.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:04.029Z,1516691644.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:04.431Z,1516691644.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:04.826Z,1516691644.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:05.223Z,1516691645.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:05.617Z,1516691645.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:06.038Z,1516691646.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:06.438Z,1516691646.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:06.833Z,1516691646.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:07.228Z,1516691647.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:07.624Z,1516691647.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:08.038Z,1516691648.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:08.430Z,1516691648.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:08.829Z,1516691648.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:09.226Z,1516691649.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:09.619Z,1516691649.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:10.029Z,1516691650.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:10.438Z,1516691650.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:10.827Z,1516691650.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:11.226Z,1516691651.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:11.638Z,1516691651.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:12.039Z,1516691652.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:12.431Z,1516691652.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:12.838Z,1516691652.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:13.221Z,1516691653.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:13.608Z,1516691653.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:14.038Z,1516691654.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:14.434Z,1516691654.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:14.829Z,1516691654.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:15.215Z,1516691655.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:15.617Z,1516691655.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:16.021Z,1516691656.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:16.429Z,1516691656.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:16.825Z,1516691656.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:16.858Z,1516691656.858 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:14:17.216Z,1516691657.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:17.615Z,1516691657.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:18.025Z,1516691658.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:18.426Z,1516691658.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:18.856Z,1516691658.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:19.225Z,1516691659.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:19.614Z,1516691659.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:20.024Z,1516691660.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:20.426Z,1516691660.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:20.820Z,1516691660.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:21.216Z,1516691661.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:21.619Z,1516691661.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:22.020Z,1516691662.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:22.428Z,1516691662.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:22.822Z,1516691662.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:23.215Z,1516691663.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:23.615Z,1516691663.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:24.033Z,1516691664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:24.428Z,1516691664.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:24.832Z,1516691664.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:25.218Z,1516691665.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:25.615Z,1516691665.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:26.026Z,1516691666.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:26.433Z,1516691666.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:26.829Z,1516691666.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:27.216Z,1516691667.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:27.617Z,1516691667.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:28.028Z,1516691668.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:28.432Z,1516691668.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:28.833Z,1516691668.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:29.219Z,1516691669.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:29.617Z,1516691669.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:30.026Z,1516691670.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:30.428Z,1516691670.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:30.832Z,1516691670.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:31.225Z,1516691671.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:31.616Z,1516691671.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:32.020Z,1516691672.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:32.437Z,1516691672.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:32.828Z,1516691672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:33.232Z,1516691673.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:33.617Z,1516691673.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:34.015Z,1516691674.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:34.420Z,1516691674.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:34.825Z,1516691674.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:35.233Z,1516691675.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:35.637Z,1516691675.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:36.029Z,1516691676.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:36.423Z,1516691676.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:36.828Z,1516691676.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:37.221Z,1516691677.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:37.617Z,1516691677.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:38.020Z,1516691678.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:38.427Z,1516691678.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:38.830Z,1516691678.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:39.237Z,1516691679.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:39.625Z,1516691679.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:40.020Z,1516691680.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:40.422Z,1516691680.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:40.821Z,1516691680.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:41.226Z,1516691681.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:41.630Z,1516691681.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:42.030Z,1516691682.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:42.419Z,1516691682.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:42.830Z,1516691682.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:43.228Z,1516691683.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:43.623Z,1516691683.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:44.035Z,1516691684.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:44.433Z,1516691684.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:44.840Z,1516691684.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:45.237Z,1516691685.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:45.632Z,1516691685.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:46.007Z,1516691686.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:46.437Z,1516691686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:46.806Z,1516691686.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:47.234Z,1516691687.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:47.649Z,1516691687.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:48.038Z,1516691688.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:48.416Z,1516691688.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:48.817Z,1516691688.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:49.213Z,1516691689.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:49.617Z,1516691689.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:50.013Z,1516691690.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:50.439Z,1516691690.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:50.826Z,1516691690.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:51.219Z,1516691691.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:51.616Z,1516691691.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:52.014Z,1516691692.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:52.415Z,1516691692.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:52.815Z,1516691692.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:52.818Z,1516691692.818 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:14:52.818Z,1516691692.818 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:14:52.818Z,1516691692.818 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:14:52.818Z,1516691692.818 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:14:53.218Z,1516691693.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:53.221Z,1516691693.221 [Default:CheckIn:D] Stopped 2018-01-23T07:14:53.221Z,1516691693.221 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:14:53.628Z,1516691693.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:53.656Z,1516691693.656 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.019368 min 2018-01-23T07:14:53.656Z,1516691693.656 [Default:CheckIn:E] Stopped 2018-01-23T07:14:53.656Z,1516691693.656 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:14:53.656Z,1516691693.656 [Default:CheckIn] Stopped 2018-01-23T07:14:53.656Z,1516691693.656 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:14:53.657Z,1516691693.657 [Default:CheckIn](INFO): Running loop #24 2018-01-23T07:14:53.657Z,1516691693.657 [Default:CheckIn] Running Loop=24 2018-01-23T07:14:53.657Z,1516691693.657 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:14:53.657Z,1516691693.657 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:14:54.018Z,1516691694.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:57.117Z,1516691697.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:57.256Z,1516691697.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:57.610Z,1516691697.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:58.018Z,1516691698.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:58.410Z,1516691698.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:58.811Z,1516691698.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:59.212Z,1516691699.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:14:59.611Z,1516691699.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:00.011Z,1516691700.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:00.429Z,1516691700.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:00.819Z,1516691700.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:01.219Z,1516691701.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:01.612Z,1516691701.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:01.989Z,1516691701.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:02.392Z,1516691702.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:02.796Z,1516691702.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:03.216Z,1516691703.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:03.617Z,1516691703.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:04.020Z,1516691704.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:04.389Z,1516691704.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:04.797Z,1516691704.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:05.199Z,1516691705.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:05.590Z,1516691705.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:06.021Z,1516691706.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:06.425Z,1516691706.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:06.822Z,1516691706.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:07.226Z,1516691707.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:07.600Z,1516691707.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:07.997Z,1516691707.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:08.399Z,1516691708.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:08.806Z,1516691708.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:09.206Z,1516691709.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:09.610Z,1516691709.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:10.032Z,1516691710.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:10.397Z,1516691710.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:10.800Z,1516691710.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:11.202Z,1516691711.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:11.599Z,1516691711.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:11.000Z,1516691712.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:12.402Z,1516691712.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:12.802Z,1516691712.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:13.202Z,1516691713.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:13.607Z,1516691713.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:13.999Z,1516691713.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:14.402Z,1516691714.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:14.801Z,1516691714.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:15.213Z,1516691715.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:15.607Z,1516691715.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:16.035Z,1516691716.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:16.399Z,1516691716.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:16.800Z,1516691716.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:17.212Z,1516691717.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:17.601Z,1516691717.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:18.001Z,1516691718.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:18.417Z,1516691718.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:18.817Z,1516691718.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:19.217Z,1516691719.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:19.609Z,1516691719.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:20.009Z,1516691720.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:20.404Z,1516691720.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:20.811Z,1516691720.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:21.209Z,1516691721.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:21.617Z,1516691721.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:22.021Z,1516691722.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:22.403Z,1516691722.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:22.805Z,1516691722.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:23.212Z,1516691723.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:23.602Z,1516691723.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:24.013Z,1516691724.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:24.414Z,1516691724.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:24.813Z,1516691724.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:25.217Z,1516691725.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:25.604Z,1516691725.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:26.011Z,1516691726.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:26.409Z,1516691726.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:26.813Z,1516691726.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:27.215Z,1516691727.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:27.629Z,1516691727.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:28.012Z,1516691728.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:28.408Z,1516691728.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:28.801Z,1516691728.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:29.212Z,1516691729.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:29.616Z,1516691729.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:30.001Z,1516691730.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:30.412Z,1516691730.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:30.814Z,1516691730.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:31.224Z,1516691731.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:31.610Z,1516691731.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:32.008Z,1516691732.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:32.404Z,1516691732.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:32.811Z,1516691732.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:33.212Z,1516691733.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:33.624Z,1516691733.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:34.061Z,1516691734.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:34.432Z,1516691734.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:34.797Z,1516691734.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:35.236Z,1516691735.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:35.633Z,1516691735.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:36.036Z,1516691736.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:36.452Z,1516691736.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:36.845Z,1516691736.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:37.213Z,1516691737.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:37.608Z,1516691737.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:38.002Z,1516691738.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:38.413Z,1516691738.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:38.814Z,1516691738.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:39.221Z,1516691739.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:39.658Z,1516691739.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:40.024Z,1516691740.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:40.414Z,1516691740.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:40.817Z,1516691740.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:41.244Z,1516691741.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:41.641Z,1516691741.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:42.045Z,1516691742.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:42.428Z,1516691742.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:42.826Z,1516691742.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:43.226Z,1516691743.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:43.226Z,1516691743.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-01-23T07:15:43.226Z,1516691743.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:15:43.228Z,1516691743.228 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:43.228Z,1516691743.228 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-01-23T07:15:43.228Z,1516691743.228 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:15:43.230Z,1516691743.230 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:43.230Z,1516691743.230 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80 2018-01-23T07:15:43.230Z,1516691743.230 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:15:43.275Z,1516691743.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:15:43.275Z,1516691743.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:15:43.275Z,1516691743.275 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:15:43.663Z,1516691743.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:15:43.663Z,1516691743.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-01-23T07:15:43.663Z,1516691743.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:15:43.663Z,1516691743.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-01-23T07:15:43.664Z,1516691743.664 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:15:43.664Z,1516691743.664 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80 2018-01-23T07:15:44.009Z,1516691744.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:15:44.009Z,1516691744.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:15:44.010Z,1516691744.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:15:44.010Z,1516691744.010 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:15:44.015Z,1516691744.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:15:44.015Z,1516691744.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:15:44.016Z,1516691744.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:15:44.016Z,1516691744.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:15:44.016Z,1516691744.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:15:44.414Z,1516691744.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:15:44.419Z,1516691744.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:44.838Z,1516691744.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:15:44.839Z,1516691744.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:45.253Z,1516691745.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:15:45.254Z,1516691745.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:45.632Z,1516691745.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:15:45.633Z,1516691745.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:46.011Z,1516691746.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:15:46.012Z,1516691746.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:46.425Z,1516691746.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:15:46.426Z,1516691746.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:46.806Z,1516691746.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:15:46.808Z,1516691746.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:47.208Z,1516691747.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:15:47.209Z,1516691747.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:47.605Z,1516691747.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:15:47.606Z,1516691747.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:48.008Z,1516691748.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:15:48.009Z,1516691748.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:48.414Z,1516691748.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:15:48.415Z,1516691748.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:48.818Z,1516691748.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:15:48.819Z,1516691748.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:49.219Z,1516691749.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:15:49.220Z,1516691749.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:49.612Z,1516691749.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:15:49.613Z,1516691749.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:50.011Z,1516691750.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:15:50.012Z,1516691750.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:50.403Z,1516691750.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:15:50.404Z,1516691750.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:50.794Z,1516691750.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:15:50.819Z,1516691750.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:51.220Z,1516691751.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:15:51.221Z,1516691751.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:51.643Z,1516691751.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:15:51.644Z,1516691751.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:52.019Z,1516691752.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:15:52.020Z,1516691752.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:52.420Z,1516691752.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:15:52.421Z,1516691752.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:52.817Z,1516691752.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:15:52.818Z,1516691752.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:53.217Z,1516691753.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:15:53.218Z,1516691753.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:53.624Z,1516691753.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:15:53.625Z,1516691753.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:54.021Z,1516691754.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:15:54.022Z,1516691754.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:54.420Z,1516691754.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:15:54.421Z,1516691754.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:57.493Z,1516691757.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T07:15:57.494Z,1516691757.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:57.626Z,1516691757.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:15:57.627Z,1516691757.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:57.990Z,1516691757.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:15:57.991Z,1516691757.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:58.402Z,1516691758.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:15:58.419Z,1516691758.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:58.796Z,1516691758.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:15:58.797Z,1516691758.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:59.192Z,1516691759.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:15:59.193Z,1516691759.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:59.594Z,1516691759.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:15:59.599Z,1516691759.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:15:59.991Z,1516691759.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:15:59.992Z,1516691759.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:00.403Z,1516691760.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:16:00.404Z,1516691760.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:00.805Z,1516691760.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:16:00.806Z,1516691760.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:01.202Z,1516691761.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:16:01.203Z,1516691761.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:01.596Z,1516691761.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:16:01.597Z,1516691761.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:01.997Z,1516691761.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:16:01.998Z,1516691761.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:02.380Z,1516691762.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:16:02.381Z,1516691762.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:02.781Z,1516691762.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:16:02.782Z,1516691762.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:03.190Z,1516691763.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:16:03.191Z,1516691763.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:03.595Z,1516691763.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:03.995Z,1516691763.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:04.384Z,1516691764.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:04.781Z,1516691764.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:05.205Z,1516691765.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:05.594Z,1516691765.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:06.021Z,1516691766.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:06.382Z,1516691766.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:06.780Z,1516691766.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:07.195Z,1516691767.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:07.594Z,1516691767.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:08.057Z,1516691768.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:08.396Z,1516691768.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:08.797Z,1516691768.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:09.178Z,1516691769.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:09.580Z,1516691769.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:10.012Z,1516691770.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:10.352Z,1516691770.352 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T07:16:10.352Z,1516691770.352 [NAL9602] Data Fault, FailCount= 2 2018-01-23T07:16:10.352Z,1516691770.352 [NAL9602](ERROR): Data Fault 2018-01-23T07:16:10.383Z,1516691770.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:10.424Z,1516691770.424 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T07:16:10.756Z,1516691770.756 [NAL9602](INFO): Powering down 2018-01-23T07:16:10.793Z,1516691770.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:11.185Z,1516691771.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:11.583Z,1516691771.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:11.595Z,1516691771.595 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T07:16:11.595Z,1516691771.595 [NAL9602] No Fault, FailCount= 2 2018-01-23T07:16:11.991Z,1516691771.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:12.391Z,1516691772.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:12.783Z,1516691772.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:13.187Z,1516691773.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:13.612Z,1516691773.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:13.987Z,1516691773.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:14.387Z,1516691774.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:14.787Z,1516691774.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:15.190Z,1516691775.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:15.587Z,1516691775.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:15.985Z,1516691775.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:16.387Z,1516691776.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:16.791Z,1516691776.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:17.185Z,1516691777.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:17.582Z,1516691777.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:17.992Z,1516691777.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:18.391Z,1516691778.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:18.786Z,1516691778.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:19.187Z,1516691779.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:19.588Z,1516691779.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:19.997Z,1516691779.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:20.385Z,1516691780.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:20.792Z,1516691780.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:21.190Z,1516691781.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:21.587Z,1516691781.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:21.996Z,1516691781.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:22.385Z,1516691782.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:22.789Z,1516691782.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:23.191Z,1516691783.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:23.586Z,1516691783.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:23.996Z,1516691783.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:24.392Z,1516691784.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:24.786Z,1516691784.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:25.192Z,1516691785.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:25.586Z,1516691785.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:25.990Z,1516691785.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:26.390Z,1516691786.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:26.791Z,1516691786.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:27.190Z,1516691787.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:27.594Z,1516691787.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:27.993Z,1516691787.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:28.389Z,1516691788.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:28.797Z,1516691788.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:29.194Z,1516691789.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:29.597Z,1516691789.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:29.994Z,1516691789.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:30.398Z,1516691790.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:30.791Z,1516691790.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:31.198Z,1516691791.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:31.600Z,1516691791.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:31.000Z,1516691792.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:32.404Z,1516691792.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:32.792Z,1516691792.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:33.196Z,1516691793.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:33.596Z,1516691793.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:33.997Z,1516691793.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:34.396Z,1516691794.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:34.796Z,1516691794.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:35.200Z,1516691795.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:35.593Z,1516691795.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:36.001Z,1516691796.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:36.399Z,1516691796.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:36.799Z,1516691796.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:37.201Z,1516691797.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:37.593Z,1516691797.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:37.973Z,1516691797.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x31774 got:0x13548 2018-01-23T07:16:37.999Z,1516691797.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:38.397Z,1516691798.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:38.805Z,1516691798.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:39.199Z,1516691799.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:39.599Z,1516691799.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:40.003Z,1516691800.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:40.404Z,1516691800.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:40.797Z,1516691800.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:41.149Z,1516691801.149 [NAL9602](INFO): Powering up NAL9602 2018-01-23T07:16:41.196Z,1516691801.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:41.582Z,1516691801.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:42.012Z,1516691802.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:42.410Z,1516691802.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:42.790Z,1516691802.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:43.189Z,1516691803.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:43.610Z,1516691803.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:44.011Z,1516691804.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:44.391Z,1516691804.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:44.793Z,1516691804.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:45.219Z,1516691805.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:45.589Z,1516691805.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:45.992Z,1516691805.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:46.397Z,1516691806.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:46.816Z,1516691806.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:47.201Z,1516691807.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:47.592Z,1516691807.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:47.988Z,1516691807.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:48.415Z,1516691808.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:48.790Z,1516691808.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:49.190Z,1516691809.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:49.589Z,1516691809.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:50.015Z,1516691810.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:50.393Z,1516691810.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:50.791Z,1516691810.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:51.189Z,1516691811.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:51.614Z,1516691811.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:51.999Z,1516691811.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:52.348Z,1516691812.348 [NAL9602](INFO): NAL9602 initialized 2018-01-23T07:16:52.394Z,1516691812.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:52.789Z,1516691812.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:53.216Z,1516691813.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:53.595Z,1516691813.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:53.997Z,1516691813.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:54.390Z,1516691814.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:54.797Z,1516691814.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:57.894Z,1516691817.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:58.029Z,1516691818.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:58.404Z,1516691818.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:58.805Z,1516691818.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:59.199Z,1516691819.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:59.597Z,1516691819.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:16:59.988Z,1516691819.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:00.398Z,1516691820.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:00.790Z,1516691820.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:01.197Z,1516691821.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:01.601Z,1516691821.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:01.999Z,1516691821.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:02.396Z,1516691822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:02.793Z,1516691822.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:03.187Z,1516691823.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:03.588Z,1516691823.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:04.000Z,1516691824.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:04.404Z,1516691824.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:04.797Z,1516691824.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:05.189Z,1516691825.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:05.586Z,1516691825.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:05.985Z,1516691825.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:06.401Z,1516691826.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:06.796Z,1516691826.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:07.206Z,1516691827.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:07.602Z,1516691827.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:08.004Z,1516691828.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:08.394Z,1516691828.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:08.798Z,1516691828.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:09.201Z,1516691829.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:09.577Z,1516691829.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:10.009Z,1516691830.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:10.408Z,1516691830.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:10.808Z,1516691830.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:11.201Z,1516691831.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:11.583Z,1516691831.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:11.977Z,1516691831.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:12.409Z,1516691832.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:12.784Z,1516691832.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:13.214Z,1516691833.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:13.619Z,1516691833.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:14.021Z,1516691834.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:14.384Z,1516691834.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:14.787Z,1516691834.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:15.196Z,1516691835.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:15.585Z,1516691835.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:15.994Z,1516691835.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:16.400Z,1516691836.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:16.790Z,1516691836.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:17.196Z,1516691837.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:17.588Z,1516691837.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:17.989Z,1516691837.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:18.397Z,1516691838.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:18.791Z,1516691838.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:19.198Z,1516691839.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:19.602Z,1516691839.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:20.004Z,1516691840.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:20.394Z,1516691840.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:20.791Z,1516691840.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:21.193Z,1516691841.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:21.589Z,1516691841.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:22.001Z,1516691842.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:22.408Z,1516691842.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:22.800Z,1516691842.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:23.190Z,1516691843.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:23.592Z,1516691843.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:23.988Z,1516691843.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:24.390Z,1516691844.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:24.792Z,1516691844.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:25.205Z,1516691845.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:25.601Z,1516691845.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:25.997Z,1516691845.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:26.388Z,1516691846.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:26.790Z,1516691846.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:27.193Z,1516691847.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:27.592Z,1516691847.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:27.997Z,1516691847.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:28.405Z,1516691848.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:28.797Z,1516691848.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:29.201Z,1516691849.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:29.598Z,1516691849.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:29.990Z,1516691849.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:30.390Z,1516691850.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:30.797Z,1516691850.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:31.199Z,1516691851.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:31.606Z,1516691851.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:32.009Z,1516691852.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:32.395Z,1516691852.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:32.799Z,1516691852.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:33.199Z,1516691853.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:33.576Z,1516691853.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:34.001Z,1516691854.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:34.412Z,1516691854.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:34.802Z,1516691854.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:35.205Z,1516691855.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:35.586Z,1516691855.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:35.977Z,1516691855.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:36.427Z,1516691856.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:36.815Z,1516691856.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:37.210Z,1516691857.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:37.614Z,1516691857.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:38.017Z,1516691858.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:38.387Z,1516691858.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:38.784Z,1516691858.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:39.192Z,1516691859.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:39.580Z,1516691859.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:40.017Z,1516691860.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:40.417Z,1516691860.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:40.794Z,1516691860.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:41.187Z,1516691861.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:41.592Z,1516691861.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:41.988Z,1516691861.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:42.388Z,1516691862.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:42.793Z,1516691862.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:43.194Z,1516691863.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:43.594Z,1516691863.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:43.994Z,1516691863.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:44.388Z,1516691864.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:44.786Z,1516691864.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:45.190Z,1516691865.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:45.588Z,1516691865.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:45.997Z,1516691865.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:46.394Z,1516691866.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:46.793Z,1516691866.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:47.187Z,1516691867.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:47.593Z,1516691867.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:47.988Z,1516691867.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:48.388Z,1516691868.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:48.787Z,1516691868.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:49.194Z,1516691869.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:49.606Z,1516691869.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:49.997Z,1516691869.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:50.389Z,1516691870.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:50.788Z,1516691870.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:51.191Z,1516691871.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:51.589Z,1516691871.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:52.006Z,1516691872.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:52.405Z,1516691872.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:52.801Z,1516691872.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:53.201Z,1516691873.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:53.595Z,1516691873.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:53.988Z,1516691873.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:54.401Z,1516691874.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:54.796Z,1516691874.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:55.213Z,1516691875.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:58.303Z,1516691878.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:58.445Z,1516691878.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:58.796Z,1516691878.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:59.172Z,1516691879.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:59.568Z,1516691879.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:17:59.000Z,1516691880.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:00.398Z,1516691880.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:00.778Z,1516691880.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:01.177Z,1516691881.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:01.571Z,1516691881.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:01.972Z,1516691881.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:02.372Z,1516691882.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:02.771Z,1516691882.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:03.195Z,1516691883.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:03.578Z,1516691883.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:03.980Z,1516691883.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:04.373Z,1516691884.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:04.770Z,1516691884.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:05.176Z,1516691885.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:05.573Z,1516691885.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:05.974Z,1516691885.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:06.380Z,1516691886.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:06.774Z,1516691886.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:07.170Z,1516691887.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:07.580Z,1516691887.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:07.981Z,1516691887.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:08.389Z,1516691888.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:08.785Z,1516691888.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:09.176Z,1516691889.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:09.573Z,1516691889.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:09.982Z,1516691889.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:10.389Z,1516691890.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:10.781Z,1516691890.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:11.176Z,1516691891.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:11.575Z,1516691891.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:11.981Z,1516691891.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:12.384Z,1516691892.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:12.781Z,1516691892.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:13.173Z,1516691893.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:13.576Z,1516691893.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:13.993Z,1516691893.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:14.389Z,1516691894.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:14.782Z,1516691894.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:15.176Z,1516691895.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:15.572Z,1516691895.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:15.982Z,1516691895.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:16.389Z,1516691896.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:16.789Z,1516691896.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:17.172Z,1516691897.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:17.577Z,1516691897.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:17.985Z,1516691897.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:18.385Z,1516691898.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:18.782Z,1516691898.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:19.179Z,1516691899.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:19.582Z,1516691899.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:19.982Z,1516691899.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:20.385Z,1516691900.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:20.791Z,1516691900.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:21.173Z,1516691901.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:21.579Z,1516691901.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:21.982Z,1516691901.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:22.385Z,1516691902.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:22.782Z,1516691902.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:23.174Z,1516691903.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:23.573Z,1516691903.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:23.982Z,1516691903.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:24.392Z,1516691904.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:24.782Z,1516691904.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:25.173Z,1516691905.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:25.582Z,1516691905.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:25.990Z,1516691905.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:26.390Z,1516691906.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:26.787Z,1516691906.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:27.181Z,1516691907.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:27.581Z,1516691907.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:27.987Z,1516691907.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:28.386Z,1516691908.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:28.782Z,1516691908.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:29.184Z,1516691909.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:29.574Z,1516691909.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:29.996Z,1516691909.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:30.391Z,1516691910.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:30.786Z,1516691910.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:31.180Z,1516691911.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:31.562Z,1516691911.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:31.991Z,1516691911.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:32.399Z,1516691912.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:32.789Z,1516691912.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:33.165Z,1516691913.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:33.569Z,1516691913.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:33.996Z,1516691913.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:34.401Z,1516691914.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:34.801Z,1516691914.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:35.168Z,1516691915.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:35.566Z,1516691915.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:35.999Z,1516691915.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:36.399Z,1516691916.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:36.795Z,1516691916.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:37.177Z,1516691917.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:37.572Z,1516691917.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:37.974Z,1516691917.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:38.378Z,1516691918.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:38.780Z,1516691918.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:39.173Z,1516691919.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:39.577Z,1516691919.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:39.981Z,1516691919.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:40.386Z,1516691920.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:40.778Z,1516691920.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:41.173Z,1516691921.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:41.571Z,1516691921.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:41.985Z,1516691921.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:42.378Z,1516691922.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:42.781Z,1516691922.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:43.177Z,1516691923.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:43.572Z,1516691923.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:43.981Z,1516691923.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:44.382Z,1516691924.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:44.382Z,1516691924.382 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-01-23T07:18:44.382Z,1516691924.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:18:44.384Z,1516691924.384 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:44.384Z,1516691924.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-01-23T07:18:44.384Z,1516691924.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:18:44.386Z,1516691924.386 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:44.386Z,1516691924.386 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81 2018-01-23T07:18:44.386Z,1516691924.386 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:18:44.423Z,1516691924.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:18:44.423Z,1516691924.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:18:44.423Z,1516691924.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:18:44.819Z,1516691924.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:18:44.819Z,1516691924.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-01-23T07:18:44.819Z,1516691924.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:18:44.819Z,1516691924.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-01-23T07:18:44.820Z,1516691924.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:18:44.820Z,1516691924.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81 2018-01-23T07:18:45.181Z,1516691925.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:18:45.181Z,1516691925.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:18:45.181Z,1516691925.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:18:45.182Z,1516691925.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:18:45.182Z,1516691925.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:18:45.183Z,1516691925.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:18:45.183Z,1516691925.183 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:18:45.184Z,1516691925.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:18:45.184Z,1516691925.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:18:45.587Z,1516691925.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:18:45.588Z,1516691925.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:45.973Z,1516691925.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:18:45.974Z,1516691925.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:46.385Z,1516691926.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:18:46.386Z,1516691926.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:46.784Z,1516691926.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:18:46.785Z,1516691926.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:47.193Z,1516691927.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:18:47.194Z,1516691927.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:47.579Z,1516691927.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:18:47.580Z,1516691927.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:47.978Z,1516691927.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:18:47.980Z,1516691927.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:48.382Z,1516691928.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:18:48.383Z,1516691928.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:48.781Z,1516691928.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:18:48.782Z,1516691928.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:49.182Z,1516691929.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:18:49.183Z,1516691929.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:49.585Z,1516691929.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:18:49.586Z,1516691929.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:49.986Z,1516691929.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:18:49.991Z,1516691929.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:50.376Z,1516691930.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:18:50.377Z,1516691930.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:50.781Z,1516691930.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:18:50.782Z,1516691930.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:51.180Z,1516691931.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:18:51.181Z,1516691931.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:51.576Z,1516691931.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:18:51.577Z,1516691931.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:51.977Z,1516691931.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:18:51.978Z,1516691931.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:52.386Z,1516691932.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:18:52.387Z,1516691932.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:52.786Z,1516691932.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:18:52.788Z,1516691932.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:53.183Z,1516691933.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:18:53.184Z,1516691933.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:53.568Z,1516691933.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:18:53.569Z,1516691933.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:53.982Z,1516691933.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:18:53.983Z,1516691933.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:54.384Z,1516691934.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:18:54.385Z,1516691934.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:54.760Z,1516691934.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:18:54.761Z,1516691934.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:55.184Z,1516691935.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:18:55.185Z,1516691935.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:55.592Z,1516691935.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:18:55.593Z,1516691935.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:58.700Z,1516691938.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T07:18:58.701Z,1516691938.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:58.836Z,1516691938.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T07:18:58.837Z,1516691938.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:59.196Z,1516691939.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:18:59.197Z,1516691939.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:59.595Z,1516691939.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:18:59.596Z,1516691939.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:18:59.991Z,1516691939.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:18:59.992Z,1516691939.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:00.402Z,1516691940.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:19:00.403Z,1516691940.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:00.804Z,1516691940.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:19:00.805Z,1516691940.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:01.197Z,1516691941.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:19:01.198Z,1516691941.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:01.596Z,1516691941.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:19:01.597Z,1516691941.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:01.988Z,1516691941.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:19:01.989Z,1516691941.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:02.391Z,1516691942.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:19:02.392Z,1516691942.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:02.800Z,1516691942.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:19:02.801Z,1516691942.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:03.205Z,1516691943.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:19:03.205Z,1516691943.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:03.605Z,1516691943.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:19:03.605Z,1516691943.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:04.001Z,1516691944.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:19:04.002Z,1516691944.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:04.409Z,1516691944.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:04.783Z,1516691944.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:05.185Z,1516691945.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:05.585Z,1516691945.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:05.979Z,1516691945.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:06.417Z,1516691946.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:06.809Z,1516691946.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:07.203Z,1516691947.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:07.606Z,1516691947.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:08.005Z,1516691948.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:08.388Z,1516691948.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:08.812Z,1516691948.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:09.218Z,1516691949.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:09.597Z,1516691949.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:10.002Z,1516691950.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:10.390Z,1516691950.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:10.788Z,1516691950.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:11.191Z,1516691951.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:11.589Z,1516691951.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:11.989Z,1516691951.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:12.401Z,1516691952.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:12.802Z,1516691952.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:13.200Z,1516691953.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:13.590Z,1516691953.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:13.991Z,1516691953.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:14.389Z,1516691954.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:14.797Z,1516691954.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:15.202Z,1516691955.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:15.602Z,1516691955.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:15.000Z,1516691956.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:16.393Z,1516691956.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:16.793Z,1516691956.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:17.193Z,1516691957.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:17.591Z,1516691957.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:17.989Z,1516691957.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:18.399Z,1516691958.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:18.801Z,1516691958.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:19.198Z,1516691959.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:19.592Z,1516691959.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:19.990Z,1516691959.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:20.388Z,1516691960.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:20.792Z,1516691960.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:21.201Z,1516691961.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:21.600Z,1516691961.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:22.004Z,1516691962.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:22.392Z,1516691962.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:22.788Z,1516691962.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:23.198Z,1516691963.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:23.593Z,1516691963.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:23.993Z,1516691963.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:24.398Z,1516691964.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:24.805Z,1516691964.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:25.198Z,1516691965.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:25.588Z,1516691965.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:25.997Z,1516691965.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:26.388Z,1516691966.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:26.797Z,1516691966.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:27.209Z,1516691967.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:27.600Z,1516691967.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:28.004Z,1516691968.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:28.397Z,1516691968.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:28.787Z,1516691968.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:29.192Z,1516691969.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:29.592Z,1516691969.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:29.995Z,1516691969.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:30.399Z,1516691970.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:30.804Z,1516691970.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:31.198Z,1516691971.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:31.596Z,1516691971.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:31.993Z,1516691971.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:32.396Z,1516691972.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:32.801Z,1516691972.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:33.205Z,1516691973.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:33.602Z,1516691973.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:34.004Z,1516691974.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:34.400Z,1516691974.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:34.795Z,1516691974.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:35.206Z,1516691975.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:35.600Z,1516691975.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:35.979Z,1516691975.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:36.404Z,1516691976.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:36.811Z,1516691976.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:37.208Z,1516691977.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:37.605Z,1516691977.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:37.984Z,1516691977.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:38.387Z,1516691978.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:38.786Z,1516691978.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:39.194Z,1516691979.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:39.598Z,1516691979.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:39.996Z,1516691979.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:40.393Z,1516691980.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:40.787Z,1516691980.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:41.186Z,1516691981.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:41.586Z,1516691981.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:41.985Z,1516691981.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:42.389Z,1516691982.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:42.794Z,1516691982.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:43.197Z,1516691983.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:43.587Z,1516691983.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:43.997Z,1516691983.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:44.387Z,1516691984.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:44.788Z,1516691984.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:45.194Z,1516691985.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:45.593Z,1516691985.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:45.993Z,1516691985.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:46.388Z,1516691986.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:46.787Z,1516691986.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:47.188Z,1516691987.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:47.590Z,1516691987.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:47.987Z,1516691987.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:48.422Z,1516691988.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:48.798Z,1516691988.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:49.194Z,1516691989.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:49.589Z,1516691989.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:49.988Z,1516691989.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:50.388Z,1516691990.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:50.789Z,1516691990.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:51.194Z,1516691991.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:51.594Z,1516691991.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:51.995Z,1516691991.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:52.393Z,1516691992.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:52.790Z,1516691992.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:53.189Z,1516691993.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:53.594Z,1516691993.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:53.992Z,1516691993.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:53.996Z,1516691993.996 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:14:53.7Z 2018-01-23T07:19:53.996Z,1516691993.996 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T07:19:53.996Z,1516691993.996 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T07:19:54.404Z,1516691994.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:54.922Z,1516691994.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:55.197Z,1516691995.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:58.326Z,1516691998.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:58.391Z,1516691998.391 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0096.lzma 2018-01-23T07:19:58.476Z,1516691998.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:58.797Z,1516691998.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:59.149Z,1516691999.149 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0096.lzma.bak 2018-01-23T07:19:59.149Z,1516691999.149 [DataOverHttps](INFO): SBD MOMSN=7755197 2018-01-23T07:19:59.227Z,1516691999.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:59.842Z,1516691999.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:19:59.000Z,1516692000.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:03.088Z,1516692003.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:03.198Z,1516692003.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:03.574Z,1516692003.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:03.988Z,1516692003.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:04.389Z,1516692004.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:04.761Z,1516692004.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:07.847Z,1516692007.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:07.929Z,1516692007.929 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0097.lzma 2018-01-23T07:20:07.969Z,1516692007.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:08.318Z,1516692008.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:08.669Z,1516692008.669 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0097.lzma.bak 2018-01-23T07:20:08.669Z,1516692008.669 [DataOverHttps](INFO): SBD MOMSN=7755199 2018-01-23T07:20:08.746Z,1516692008.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:09.357Z,1516692009.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:09.360Z,1516692009.360 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T07:20:09.360Z,1516692009.360 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T07:20:09.360Z,1516692009.360 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T07:20:09.525Z,1516692009.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:12.613Z,1516692012.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:12.728Z,1516692012.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:13.105Z,1516692013.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:13.525Z,1516692013.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:13.893Z,1516692013.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:14.294Z,1516692014.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:14.691Z,1516692014.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:15.088Z,1516692015.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:15.494Z,1516692015.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:15.905Z,1516692015.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:16.298Z,1516692016.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:16.691Z,1516692016.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:17.093Z,1516692017.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:17.489Z,1516692017.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:17.900Z,1516692017.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:18.294Z,1516692018.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:18.705Z,1516692018.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:19.094Z,1516692019.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:19.501Z,1516692019.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:19.969Z,1516692019.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:20.296Z,1516692020.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:20.701Z,1516692020.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:21.069Z,1516692021.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:21.498Z,1516692021.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:21.923Z,1516692021.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:22.286Z,1516692022.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:22.673Z,1516692022.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:23.095Z,1516692023.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:23.473Z,1516692023.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:23.877Z,1516692023.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:24.306Z,1516692024.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:24.707Z,1516692024.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:25.108Z,1516692025.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:25.480Z,1516692025.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:25.877Z,1516692025.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:26.289Z,1516692026.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:26.680Z,1516692026.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:27.081Z,1516692027.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:27.488Z,1516692027.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:27.892Z,1516692027.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:28.290Z,1516692028.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:28.680Z,1516692028.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:29.080Z,1516692029.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:29.482Z,1516692029.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:29.891Z,1516692029.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:30.290Z,1516692030.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:30.689Z,1516692030.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:31.099Z,1516692031.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:31.505Z,1516692031.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:31.885Z,1516692031.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:32.285Z,1516692032.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:32.681Z,1516692032.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:33.079Z,1516692033.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:33.485Z,1516692033.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:33.886Z,1516692033.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:34.289Z,1516692034.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:34.689Z,1516692034.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:35.080Z,1516692035.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:35.481Z,1516692035.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:35.880Z,1516692035.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:36.292Z,1516692036.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:36.689Z,1516692036.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:37.090Z,1516692037.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:37.487Z,1516692037.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:37.884Z,1516692037.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:38.282Z,1516692038.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:38.685Z,1516692038.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:39.081Z,1516692039.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:39.493Z,1516692039.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:39.893Z,1516692039.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:40.291Z,1516692040.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:40.687Z,1516692040.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:41.090Z,1516692041.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:41.484Z,1516692041.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:41.887Z,1516692041.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:42.290Z,1516692042.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:42.695Z,1516692042.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:43.100Z,1516692043.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:43.488Z,1516692043.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:43.881Z,1516692043.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:44.289Z,1516692044.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:44.689Z,1516692044.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:45.077Z,1516692045.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:45.497Z,1516692045.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:45.900Z,1516692045.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:46.294Z,1516692046.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:46.693Z,1516692046.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:47.093Z,1516692047.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:47.488Z,1516692047.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:47.895Z,1516692047.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:48.301Z,1516692048.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:48.699Z,1516692048.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:49.093Z,1516692049.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:49.493Z,1516692049.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:49.869Z,1516692049.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:50.277Z,1516692050.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:50.680Z,1516692050.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:51.072Z,1516692051.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:51.504Z,1516692051.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:51.913Z,1516692051.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:52.309Z,1516692052.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:52.705Z,1516692052.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:53.081Z,1516692053.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:53.478Z,1516692053.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:53.880Z,1516692053.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:54.286Z,1516692054.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:54.686Z,1516692054.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:55.083Z,1516692055.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:55.489Z,1516692055.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:55.881Z,1516692055.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:56.281Z,1516692056.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:56.700Z,1516692056.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:57.080Z,1516692057.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:57.486Z,1516692057.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:57.891Z,1516692057.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:58.286Z,1516692058.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:58.680Z,1516692058.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:59.085Z,1516692059.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:59.481Z,1516692059.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:20:59.880Z,1516692059.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:00.293Z,1516692060.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:00.693Z,1516692060.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:01.090Z,1516692061.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:01.484Z,1516692061.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:01.881Z,1516692061.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:02.281Z,1516692062.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:02.684Z,1516692062.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:03.081Z,1516692063.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:03.491Z,1516692063.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:03.893Z,1516692063.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:04.289Z,1516692064.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:04.686Z,1516692064.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:05.084Z,1516692065.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:05.482Z,1516692065.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:05.881Z,1516692065.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:06.294Z,1516692066.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:06.694Z,1516692066.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:07.089Z,1516692067.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:07.488Z,1516692067.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:07.881Z,1516692067.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:08.289Z,1516692068.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:08.681Z,1516692068.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:09.081Z,1516692069.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:09.490Z,1516692069.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:09.894Z,1516692069.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:12.989Z,1516692072.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:13.132Z,1516692073.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:13.476Z,1516692073.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:13.855Z,1516692073.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:14.276Z,1516692074.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:14.688Z,1516692074.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:15.078Z,1516692075.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:15.457Z,1516692075.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:15.856Z,1516692075.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:16.262Z,1516692076.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:16.658Z,1516692076.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:17.077Z,1516692077.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:17.472Z,1516692077.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:17.855Z,1516692077.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:18.262Z,1516692078.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:18.665Z,1516692078.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:19.058Z,1516692079.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:19.456Z,1516692079.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:19.857Z,1516692079.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:20.258Z,1516692080.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:20.662Z,1516692080.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:21.076Z,1516692081.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:21.458Z,1516692081.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:21.863Z,1516692081.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:22.266Z,1516692082.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:22.675Z,1516692082.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:23.066Z,1516692083.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:23.468Z,1516692083.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:23.867Z,1516692083.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:24.277Z,1516692084.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:24.673Z,1516692084.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:25.068Z,1516692085.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:25.473Z,1516692085.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:25.848Z,1516692085.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:26.278Z,1516692086.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:26.679Z,1516692086.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:27.079Z,1516692087.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:27.460Z,1516692087.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:27.855Z,1516692087.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:28.262Z,1516692088.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:28.658Z,1516692088.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:29.058Z,1516692089.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:29.459Z,1516692089.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:29.854Z,1516692089.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:30.258Z,1516692090.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:30.686Z,1516692090.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:31.070Z,1516692091.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:31.457Z,1516692091.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:31.865Z,1516692091.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:32.273Z,1516692092.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:32.676Z,1516692092.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:33.073Z,1516692093.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:33.457Z,1516692093.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:33.863Z,1516692093.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:34.270Z,1516692094.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:34.671Z,1516692094.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:35.067Z,1516692095.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:35.468Z,1516692095.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:35.859Z,1516692095.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:36.274Z,1516692096.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:36.670Z,1516692096.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:37.069Z,1516692097.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:37.464Z,1516692097.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:37.860Z,1516692097.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:38.270Z,1516692098.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:38.681Z,1516692098.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:39.072Z,1516692099.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:39.458Z,1516692099.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:39.873Z,1516692099.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:40.272Z,1516692100.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:40.679Z,1516692100.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:41.070Z,1516692101.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:41.470Z,1516692101.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:41.865Z,1516692101.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:42.273Z,1516692102.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:42.677Z,1516692102.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:43.073Z,1516692103.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:43.456Z,1516692103.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:43.850Z,1516692103.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:44.268Z,1516692104.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:44.685Z,1516692104.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:45.071Z,1516692105.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:45.469Z,1516692105.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:45.469Z,1516692105.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-01-23T07:21:45.469Z,1516692105.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:21:45.475Z,1516692105.475 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:45.475Z,1516692105.475 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-01-23T07:21:45.475Z,1516692105.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:21:45.477Z,1516692105.477 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:45.477Z,1516692105.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82 2018-01-23T07:21:45.477Z,1516692105.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:21:45.502Z,1516692105.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:21:45.502Z,1516692105.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:21:45.502Z,1516692105.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:21:45.887Z,1516692105.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:21:45.887Z,1516692105.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-01-23T07:21:45.888Z,1516692105.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:21:45.888Z,1516692105.888 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-01-23T07:21:45.888Z,1516692105.888 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:21:45.888Z,1516692105.888 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82 2018-01-23T07:21:46.257Z,1516692106.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:21:46.257Z,1516692106.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:21:46.258Z,1516692106.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:21:46.258Z,1516692106.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:21:46.258Z,1516692106.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:21:46.259Z,1516692106.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:21:46.259Z,1516692106.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:21:46.260Z,1516692106.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:21:46.260Z,1516692106.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:21:46.662Z,1516692106.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:21:46.663Z,1516692106.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:47.064Z,1516692107.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:21:47.065Z,1516692107.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:47.460Z,1516692107.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:21:47.461Z,1516692107.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:47.857Z,1516692107.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:21:47.858Z,1516692107.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:48.260Z,1516692108.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:21:48.261Z,1516692108.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:48.661Z,1516692108.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:21:48.662Z,1516692108.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:49.068Z,1516692109.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:21:49.069Z,1516692109.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:49.472Z,1516692109.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:21:49.473Z,1516692109.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:49.860Z,1516692109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:21:49.861Z,1516692109.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:50.265Z,1516692110.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:21:50.266Z,1516692110.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:50.759Z,1516692110.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T07:21:50.760Z,1516692110.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:51.052Z,1516692111.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:21:51.053Z,1516692111.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:51.468Z,1516692111.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:21:51.469Z,1516692111.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:51.868Z,1516692111.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:21:51.869Z,1516692111.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:52.272Z,1516692112.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:21:52.273Z,1516692112.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:52.664Z,1516692112.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:21:52.665Z,1516692112.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:53.054Z,1516692113.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:21:53.055Z,1516692113.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:53.468Z,1516692113.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:21:53.469Z,1516692113.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:53.860Z,1516692113.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:21:53.860Z,1516692113.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:54.254Z,1516692114.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:21:54.255Z,1516692114.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:54.677Z,1516692114.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:21:54.678Z,1516692114.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:55.065Z,1516692115.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:21:55.066Z,1516692115.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:55.464Z,1516692115.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:21:55.465Z,1516692115.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:55.855Z,1516692115.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:21:55.856Z,1516692115.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:56.254Z,1516692116.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:21:56.255Z,1516692116.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:56.676Z,1516692116.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:21:56.677Z,1516692116.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:57.057Z,1516692117.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:21:57.058Z,1516692117.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:57.469Z,1516692117.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:21:57.470Z,1516692117.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:57.868Z,1516692117.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:21:57.869Z,1516692117.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:58.274Z,1516692118.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:21:58.275Z,1516692118.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:58.668Z,1516692118.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:21:58.669Z,1516692118.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:59.060Z,1516692119.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:21:59.061Z,1516692119.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:59.464Z,1516692119.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:21:59.465Z,1516692119.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:21:59.861Z,1516692119.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:21:59.862Z,1516692119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:00.260Z,1516692120.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:22:00.261Z,1516692120.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:00.676Z,1516692120.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:22:00.677Z,1516692120.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:01.080Z,1516692121.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:22:01.081Z,1516692121.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:01.465Z,1516692121.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:22:01.466Z,1516692121.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:01.868Z,1516692121.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:22:01.869Z,1516692121.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:02.264Z,1516692122.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:22:02.265Z,1516692122.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:02.662Z,1516692122.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:22:02.664Z,1516692122.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:03.068Z,1516692123.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:22:03.069Z,1516692123.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:03.469Z,1516692123.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:22:03.470Z,1516692123.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:03.873Z,1516692123.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:22:03.874Z,1516692123.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:04.272Z,1516692124.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:22:04.273Z,1516692124.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:04.664Z,1516692124.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:22:04.665Z,1516692124.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:05.064Z,1516692125.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:22:05.065Z,1516692125.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:05.446Z,1516692125.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:22:05.471Z,1516692125.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:05.848Z,1516692125.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:06.253Z,1516692126.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:06.678Z,1516692126.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:07.085Z,1516692127.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:07.484Z,1516692127.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:07.851Z,1516692127.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:08.277Z,1516692128.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:08.682Z,1516692128.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:09.056Z,1516692129.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:09.486Z,1516692129.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:09.866Z,1516692129.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:10.258Z,1516692130.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:13.339Z,1516692133.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:13.481Z,1516692133.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:13.833Z,1516692133.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:14.230Z,1516692134.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:14.633Z,1516692134.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:15.029Z,1516692135.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:15.404Z,1516692135.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:15.805Z,1516692135.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:16.205Z,1516692136.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:16.611Z,1516692136.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:17.010Z,1516692137.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:17.406Z,1516692137.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:17.806Z,1516692137.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:18.204Z,1516692138.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:18.612Z,1516692138.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:19.008Z,1516692139.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:19.418Z,1516692139.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:19.817Z,1516692139.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:20.215Z,1516692140.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:20.617Z,1516692140.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:21.008Z,1516692141.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:21.409Z,1516692141.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:21.807Z,1516692141.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:22.206Z,1516692142.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:22.615Z,1516692142.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:23.018Z,1516692143.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:23.421Z,1516692143.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:23.808Z,1516692143.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:24.209Z,1516692144.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:24.606Z,1516692144.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:25.009Z,1516692145.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:25.414Z,1516692145.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:25.817Z,1516692145.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:26.215Z,1516692146.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:26.605Z,1516692146.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:27.006Z,1516692147.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:27.409Z,1516692147.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:27.809Z,1516692147.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:28.206Z,1516692148.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:28.615Z,1516692148.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:29.017Z,1516692149.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:29.425Z,1516692149.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:29.808Z,1516692149.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:30.209Z,1516692150.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:30.606Z,1516692150.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:31.009Z,1516692151.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:31.418Z,1516692151.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:31.825Z,1516692151.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:32.218Z,1516692152.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:32.609Z,1516692152.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:33.006Z,1516692153.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:33.409Z,1516692153.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:33.809Z,1516692153.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:34.204Z,1516692154.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:34.615Z,1516692154.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:35.017Z,1516692155.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:35.421Z,1516692155.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:35.808Z,1516692155.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:36.206Z,1516692156.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:36.606Z,1516692156.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:37.009Z,1516692157.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:37.418Z,1516692157.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:37.825Z,1516692157.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:38.218Z,1516692158.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:38.606Z,1516692158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:39.011Z,1516692159.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:39.409Z,1516692159.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:39.809Z,1516692159.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:40.213Z,1516692160.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:40.615Z,1516692160.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:41.019Z,1516692161.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:41.425Z,1516692161.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:41.807Z,1516692161.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:42.217Z,1516692162.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:42.609Z,1516692162.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:43.011Z,1516692163.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:43.419Z,1516692163.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:43.821Z,1516692163.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:44.216Z,1516692164.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:44.613Z,1516692164.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:45.017Z,1516692165.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:45.426Z,1516692165.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:45.834Z,1516692165.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:46.233Z,1516692166.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:46.601Z,1516692166.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:47.025Z,1516692167.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:47.429Z,1516692167.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:47.806Z,1516692167.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:48.209Z,1516692168.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:48.632Z,1516692168.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:49.030Z,1516692169.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:49.406Z,1516692169.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:49.803Z,1516692169.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:50.210Z,1516692170.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:50.610Z,1516692170.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:51.004Z,1516692171.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:51.411Z,1516692171.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:51.810Z,1516692171.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:52.222Z,1516692172.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:52.612Z,1516692172.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:53.004Z,1516692173.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:53.406Z,1516692173.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:53.814Z,1516692173.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:54.213Z,1516692174.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:54.629Z,1516692174.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:55.023Z,1516692175.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:55.425Z,1516692175.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:55.821Z,1516692175.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:56.213Z,1516692176.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:56.611Z,1516692176.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:57.014Z,1516692177.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:57.425Z,1516692177.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:57.820Z,1516692177.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:58.226Z,1516692178.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:58.613Z,1516692178.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:59.015Z,1516692179.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:59.425Z,1516692179.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:22:59.824Z,1516692179.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:00.229Z,1516692180.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:00.617Z,1516692180.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:01.022Z,1516692181.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:01.421Z,1516692181.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:01.828Z,1516692181.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:02.222Z,1516692182.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:02.620Z,1516692182.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:03.021Z,1516692183.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:03.422Z,1516692183.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:03.829Z,1516692183.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:04.226Z,1516692184.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:04.600Z,1516692184.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:04.996Z,1516692184.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:05.426Z,1516692185.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:05.829Z,1516692185.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:06.226Z,1516692186.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:06.628Z,1516692186.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:07.031Z,1516692187.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:07.423Z,1516692187.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:07.833Z,1516692187.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:08.223Z,1516692188.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:08.623Z,1516692188.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:09.006Z,1516692189.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:09.437Z,1516692189.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:09.807Z,1516692189.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:10.213Z,1516692190.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:10.608Z,1516692190.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:13.705Z,1516692193.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:13.849Z,1516692193.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:14.211Z,1516692194.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:14.609Z,1516692194.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:15.008Z,1516692195.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:15.398Z,1516692195.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:15.807Z,1516692195.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:16.212Z,1516692196.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:16.621Z,1516692196.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:17.013Z,1516692197.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:17.407Z,1516692197.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:17.813Z,1516692197.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:18.216Z,1516692198.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:18.607Z,1516692198.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:18.989Z,1516692198.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:19.415Z,1516692199.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:19.813Z,1516692199.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:20.211Z,1516692200.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:20.610Z,1516692200.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:21.016Z,1516692201.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:21.391Z,1516692201.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:21.790Z,1516692201.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:22.228Z,1516692202.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:22.595Z,1516692202.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:22.995Z,1516692202.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:23.424Z,1516692203.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:23.795Z,1516692203.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:24.201Z,1516692204.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:24.590Z,1516692204.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:24.993Z,1516692204.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:25.393Z,1516692205.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:25.797Z,1516692205.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:26.205Z,1516692206.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:26.606Z,1516692206.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:26.995Z,1516692206.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:27.396Z,1516692207.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:27.798Z,1516692207.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:28.192Z,1516692208.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:28.606Z,1516692208.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:29.029Z,1516692209.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:29.403Z,1516692209.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:29.790Z,1516692209.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:30.196Z,1516692210.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:30.597Z,1516692210.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:31.001Z,1516692211.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:31.391Z,1516692211.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:31.807Z,1516692211.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:32.238Z,1516692212.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:32.617Z,1516692212.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:32.990Z,1516692212.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:33.401Z,1516692213.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:33.795Z,1516692213.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:34.196Z,1516692214.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:34.605Z,1516692214.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:35.007Z,1516692215.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:35.405Z,1516692215.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:35.797Z,1516692215.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:36.205Z,1516692216.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:36.578Z,1516692216.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:36.981Z,1516692216.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:37.379Z,1516692217.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:37.816Z,1516692217.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:38.210Z,1516692218.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:38.597Z,1516692218.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:38.988Z,1516692218.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:39.393Z,1516692219.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:39.788Z,1516692219.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:40.187Z,1516692220.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:40.602Z,1516692220.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:40.992Z,1516692220.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:41.394Z,1516692221.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:41.789Z,1516692221.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:42.188Z,1516692222.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:42.588Z,1516692222.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:42.990Z,1516692222.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:43.389Z,1516692223.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:43.801Z,1516692223.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:44.201Z,1516692224.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:44.597Z,1516692224.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:44.988Z,1516692224.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:45.391Z,1516692225.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:45.793Z,1516692225.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:46.188Z,1516692226.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:46.601Z,1516692226.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:46.997Z,1516692226.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:47.401Z,1516692227.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:47.790Z,1516692227.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:48.188Z,1516692228.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:48.588Z,1516692228.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:48.993Z,1516692228.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:49.388Z,1516692229.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:49.801Z,1516692229.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:50.201Z,1516692230.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:50.597Z,1516692230.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:50.987Z,1516692230.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:51.409Z,1516692231.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:51.791Z,1516692231.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:52.196Z,1516692232.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:52.606Z,1516692232.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:53.002Z,1516692233.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:53.401Z,1516692233.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:53.789Z,1516692233.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:54.192Z,1516692234.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:54.597Z,1516692234.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:54.996Z,1516692234.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:55.399Z,1516692235.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:55.802Z,1516692235.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:56.202Z,1516692236.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:56.602Z,1516692236.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:56.996Z,1516692236.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:57.396Z,1516692237.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:57.793Z,1516692237.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:58.190Z,1516692238.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:58.602Z,1516692238.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:59.003Z,1516692239.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:59.402Z,1516692239.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:23:59.791Z,1516692239.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:00.193Z,1516692240.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:00.599Z,1516692240.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:00.997Z,1516692240.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:01.394Z,1516692241.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:01.805Z,1516692241.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:02.209Z,1516692242.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:02.604Z,1516692242.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:02.995Z,1516692242.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:03.390Z,1516692243.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:03.797Z,1516692243.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:04.197Z,1516692244.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:04.604Z,1516692244.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:05.008Z,1516692245.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:05.406Z,1516692245.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:05.796Z,1516692245.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:06.208Z,1516692246.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:06.577Z,1516692246.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:06.985Z,1516692246.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:07.385Z,1516692247.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:07.812Z,1516692247.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:08.214Z,1516692248.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:08.612Z,1516692248.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:08.981Z,1516692248.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:09.413Z,1516692249.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:09.785Z,1516692249.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:10.185Z,1516692250.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:10.598Z,1516692250.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:10.993Z,1516692250.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:14.090Z,1516692254.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:14.224Z,1516692254.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:14.580Z,1516692254.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:14.986Z,1516692254.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:15.387Z,1516692255.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:15.789Z,1516692255.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:16.190Z,1516692256.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:16.593Z,1516692256.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:16.985Z,1516692256.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:17.011Z,1516692257.011 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:24:17.363Z,1516692257.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:17.793Z,1516692257.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:18.172Z,1516692258.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:18.578Z,1516692258.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:18.974Z,1516692258.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:19.378Z,1516692259.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:19.772Z,1516692259.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:20.171Z,1516692260.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:20.573Z,1516692260.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:20.973Z,1516692260.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:21.372Z,1516692261.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:21.787Z,1516692261.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:22.185Z,1516692262.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:22.582Z,1516692262.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:22.974Z,1516692262.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:23.376Z,1516692263.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:23.777Z,1516692263.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:24.177Z,1516692264.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:24.588Z,1516692264.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:24.982Z,1516692264.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:25.389Z,1516692265.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:25.780Z,1516692265.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:26.173Z,1516692266.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:26.577Z,1516692266.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:26.973Z,1516692266.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:27.373Z,1516692267.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:27.782Z,1516692267.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:28.185Z,1516692268.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:28.582Z,1516692268.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:28.978Z,1516692268.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:29.375Z,1516692269.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:29.779Z,1516692269.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:30.180Z,1516692270.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:30.583Z,1516692270.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:30.986Z,1516692270.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:31.386Z,1516692271.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:31.780Z,1516692271.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:32.177Z,1516692272.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:32.580Z,1516692272.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:32.980Z,1516692272.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:33.378Z,1516692273.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:33.790Z,1516692273.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:34.187Z,1516692274.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:34.589Z,1516692274.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:34.979Z,1516692274.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:35.385Z,1516692275.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:35.780Z,1516692275.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:36.184Z,1516692276.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:36.587Z,1516692276.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:36.989Z,1516692276.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:37.393Z,1516692277.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:37.784Z,1516692277.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:38.185Z,1516692278.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:38.593Z,1516692278.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:38.991Z,1516692278.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:39.391Z,1516692279.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:39.793Z,1516692279.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:40.168Z,1516692280.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:40.600Z,1516692280.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:40.993Z,1516692280.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:41.385Z,1516692281.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:41.779Z,1516692281.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:42.182Z,1516692282.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:42.588Z,1516692282.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:42.986Z,1516692282.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:43.384Z,1516692283.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:43.777Z,1516692283.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:44.175Z,1516692284.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:44.594Z,1516692284.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:44.988Z,1516692284.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:45.384Z,1516692285.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:45.774Z,1516692285.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:46.183Z,1516692286.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:46.594Z,1516692286.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:46.594Z,1516692286.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-01-23T07:24:46.594Z,1516692286.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:24:46.596Z,1516692286.596 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:46.596Z,1516692286.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-01-23T07:24:46.596Z,1516692286.596 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:24:46.598Z,1516692286.598 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:46.598Z,1516692286.598 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83 2018-01-23T07:24:46.598Z,1516692286.598 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:24:46.618Z,1516692286.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:24:46.619Z,1516692286.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:24:46.619Z,1516692286.619 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:24:46.000Z,1516692287.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:24:46.000Z,1516692287.000 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-01-23T07:24:47.000Z,1516692287.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:24:47.000Z,1516692287.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-01-23T07:24:47.001Z,1516692287.001 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:24:47.001Z,1516692287.001 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83 2018-01-23T07:24:47.382Z,1516692287.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:24:47.382Z,1516692287.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:24:47.383Z,1516692287.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:24:47.383Z,1516692287.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:24:47.384Z,1516692287.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:24:47.384Z,1516692287.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:24:47.384Z,1516692287.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:24:47.385Z,1516692287.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:24:47.385Z,1516692287.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:24:47.776Z,1516692287.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:24:47.777Z,1516692287.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:48.175Z,1516692288.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:24:48.176Z,1516692288.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:48.593Z,1516692288.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:24:48.594Z,1516692288.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:48.982Z,1516692288.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:24:48.987Z,1516692288.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:49.400Z,1516692289.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:24:49.401Z,1516692289.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:49.768Z,1516692289.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:24:49.768Z,1516692289.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:50.175Z,1516692290.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:24:50.176Z,1516692290.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:50.601Z,1516692290.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:24:50.602Z,1516692290.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:50.977Z,1516692290.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:24:50.978Z,1516692290.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:51.378Z,1516692291.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:24:51.379Z,1516692291.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:51.774Z,1516692291.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:24:51.775Z,1516692291.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:52.176Z,1516692292.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:24:52.177Z,1516692292.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:52.580Z,1516692292.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:24:52.581Z,1516692292.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:52.984Z,1516692292.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:24:52.985Z,1516692292.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:53.378Z,1516692293.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:24:53.379Z,1516692293.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:53.774Z,1516692293.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:24:53.775Z,1516692293.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:54.184Z,1516692294.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:24:54.185Z,1516692294.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:54.585Z,1516692294.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:24:54.586Z,1516692294.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:54.982Z,1516692294.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:24:54.983Z,1516692294.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:55.382Z,1516692295.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:24:55.383Z,1516692295.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:55.773Z,1516692295.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:24:55.774Z,1516692295.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:56.173Z,1516692296.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:24:56.174Z,1516692296.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:56.581Z,1516692296.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:24:56.582Z,1516692296.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:56.985Z,1516692296.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:24:56.986Z,1516692296.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:57.382Z,1516692297.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:24:57.383Z,1516692297.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:57.774Z,1516692297.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:24:57.775Z,1516692297.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:58.176Z,1516692298.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:24:58.177Z,1516692298.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:58.582Z,1516692298.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:24:58.583Z,1516692298.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:58.985Z,1516692298.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:24:58.986Z,1516692298.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:59.393Z,1516692299.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:24:59.394Z,1516692299.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:24:59.774Z,1516692299.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:24:59.775Z,1516692299.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:00.179Z,1516692300.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:25:00.180Z,1516692300.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:00.585Z,1516692300.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:25:00.586Z,1516692300.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:00.992Z,1516692300.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:25:00.993Z,1516692300.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:01.386Z,1516692301.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:25:01.387Z,1516692301.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:01.775Z,1516692301.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:25:01.776Z,1516692301.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:02.174Z,1516692302.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:25:02.175Z,1516692302.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:02.584Z,1516692302.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:25:02.585Z,1516692302.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:02.989Z,1516692302.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:25:02.989Z,1516692302.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:03.388Z,1516692303.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:25:03.389Z,1516692303.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:03.774Z,1516692303.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:25:03.775Z,1516692303.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:04.175Z,1516692304.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:25:04.176Z,1516692304.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:04.582Z,1516692304.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:25:04.583Z,1516692304.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:04.996Z,1516692304.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:25:04.997Z,1516692304.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:05.383Z,1516692305.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:25:05.384Z,1516692305.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:05.774Z,1516692305.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:25:05.775Z,1516692305.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:06.179Z,1516692306.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:25:06.180Z,1516692306.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:06.586Z,1516692306.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:25:06.587Z,1516692306.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:06.993Z,1516692306.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:07.384Z,1516692307.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:07.785Z,1516692307.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:08.178Z,1516692308.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:08.585Z,1516692308.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:09.003Z,1516692309.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:09.385Z,1516692309.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:09.779Z,1516692309.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:09.782Z,1516692309.782 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:25:09.783Z,1516692309.783 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:25:09.783Z,1516692309.783 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:25:09.783Z,1516692309.783 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:25:10.185Z,1516692310.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:10.192Z,1516692310.192 [Default:CheckIn:D] Stopped 2018-01-23T07:25:10.192Z,1516692310.192 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:25:10.593Z,1516692310.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.302197 min 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn:E] Stopped 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn] Stopped 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn](INFO): Running loop #25 2018-01-23T07:25:10.597Z,1516692310.597 [Default:CheckIn] Running Loop=25 2018-01-23T07:25:10.598Z,1516692310.598 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:25:10.598Z,1516692310.598 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:25:10.993Z,1516692310.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:11.393Z,1516692311.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:14.487Z,1516692314.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:14.640Z,1516692314.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:14.965Z,1516692314.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:15.393Z,1516692315.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:15.785Z,1516692315.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:16.149Z,1516692316.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:16.548Z,1516692316.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:16.953Z,1516692316.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:17.361Z,1516692317.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:17.758Z,1516692317.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:18.155Z,1516692318.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:18.561Z,1516692318.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:18.953Z,1516692318.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:19.356Z,1516692319.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:19.753Z,1516692319.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:20.156Z,1516692320.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:20.552Z,1516692320.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:20.965Z,1516692320.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:21.363Z,1516692321.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:21.762Z,1516692321.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:22.151Z,1516692322.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:22.549Z,1516692322.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:22.953Z,1516692322.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:23.353Z,1516692323.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:23.758Z,1516692323.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:24.155Z,1516692324.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:24.555Z,1516692324.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:24.952Z,1516692324.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:25.351Z,1516692325.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:25.753Z,1516692325.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:26.152Z,1516692326.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:26.552Z,1516692326.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:26.981Z,1516692326.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:27.382Z,1516692327.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:27.755Z,1516692327.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:28.151Z,1516692328.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:28.588Z,1516692328.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:28.958Z,1516692328.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:29.361Z,1516692329.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:29.795Z,1516692329.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:30.204Z,1516692330.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:30.597Z,1516692330.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:30.959Z,1516692330.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:31.358Z,1516692331.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:31.761Z,1516692331.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:32.166Z,1516692332.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:32.549Z,1516692332.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:32.965Z,1516692332.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:33.368Z,1516692333.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:33.773Z,1516692333.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:34.164Z,1516692334.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:34.566Z,1516692334.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:34.956Z,1516692334.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:35.365Z,1516692335.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:35.774Z,1516692335.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:36.166Z,1516692336.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:36.570Z,1516692336.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:36.988Z,1516692336.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:37.365Z,1516692337.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:37.770Z,1516692337.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:38.188Z,1516692338.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:38.578Z,1516692338.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:38.985Z,1516692338.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:39.425Z,1516692339.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:39.781Z,1516692339.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:40.168Z,1516692340.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:40.570Z,1516692340.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:40.949Z,1516692340.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:41.375Z,1516692341.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:41.784Z,1516692341.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:42.178Z,1516692342.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:42.574Z,1516692342.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:42.994Z,1516692342.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:43.386Z,1516692343.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:43.785Z,1516692343.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:44.211Z,1516692344.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:44.567Z,1516692344.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:44.976Z,1516692344.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:45.447Z,1516692345.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:45.797Z,1516692345.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:46.170Z,1516692346.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:46.617Z,1516692346.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:46.999Z,1516692346.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:47.369Z,1516692347.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:47.813Z,1516692347.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:48.181Z,1516692348.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:48.658Z,1516692348.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:48.966Z,1516692348.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:49.371Z,1516692349.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:49.805Z,1516692349.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:50.204Z,1516692350.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:50.566Z,1516692350.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:50.989Z,1516692350.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:51.389Z,1516692351.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:51.785Z,1516692351.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:52.192Z,1516692352.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:52.602Z,1516692352.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:52.961Z,1516692352.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:53.426Z,1516692353.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:53.769Z,1516692353.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:54.169Z,1516692354.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:54.570Z,1516692354.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:54.959Z,1516692354.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:55.365Z,1516692355.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:55.749Z,1516692355.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:56.153Z,1516692356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:56.553Z,1516692356.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:56.973Z,1516692356.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:57.376Z,1516692357.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:57.775Z,1516692357.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:58.155Z,1516692358.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:58.555Z,1516692358.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:58.953Z,1516692358.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:59.357Z,1516692359.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:25:59.756Z,1516692359.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:00.205Z,1516692360.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:00.565Z,1516692360.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:00.944Z,1516692360.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:01.345Z,1516692361.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:01.745Z,1516692361.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:02.169Z,1516692362.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:02.563Z,1516692362.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:02.965Z,1516692362.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:03.365Z,1516692363.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:03.762Z,1516692363.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:04.154Z,1516692364.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:04.553Z,1516692364.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:04.955Z,1516692364.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:05.363Z,1516692365.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:05.763Z,1516692365.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:06.166Z,1516692366.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:06.563Z,1516692366.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:06.961Z,1516692366.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:07.365Z,1516692367.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:07.759Z,1516692367.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:08.153Z,1516692368.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:08.554Z,1516692368.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:08.962Z,1516692368.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:09.365Z,1516692369.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:09.762Z,1516692369.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:10.153Z,1516692370.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:10.551Z,1516692370.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:10.957Z,1516692370.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:11.354Z,1516692371.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:11.762Z,1516692371.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:14.866Z,1516692374.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:15.005Z,1516692375.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:15.354Z,1516692375.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:15.756Z,1516692375.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:16.157Z,1516692376.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:16.554Z,1516692376.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:16.962Z,1516692376.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:17.366Z,1516692377.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:17.761Z,1516692377.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:18.164Z,1516692378.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:18.558Z,1516692378.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:18.958Z,1516692378.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:19.360Z,1516692379.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:19.765Z,1516692379.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:20.166Z,1516692380.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:20.563Z,1516692380.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:20.957Z,1516692380.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:21.357Z,1516692381.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:21.767Z,1516692381.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:22.156Z,1516692382.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:22.574Z,1516692382.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:22.970Z,1516692382.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:23.374Z,1516692383.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:23.774Z,1516692383.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:24.175Z,1516692384.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:24.553Z,1516692384.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:24.952Z,1516692384.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:25.353Z,1516692385.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:25.782Z,1516692385.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:26.162Z,1516692386.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:26.555Z,1516692386.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:26.950Z,1516692386.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:27.365Z,1516692387.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:27.765Z,1516692387.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:28.156Z,1516692388.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:28.556Z,1516692388.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:28.970Z,1516692388.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:29.362Z,1516692389.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:29.765Z,1516692389.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:30.158Z,1516692390.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:30.552Z,1516692390.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:30.959Z,1516692390.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:31.353Z,1516692391.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:31.764Z,1516692391.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:32.169Z,1516692392.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:32.563Z,1516692392.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:32.953Z,1516692392.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:33.362Z,1516692393.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:33.753Z,1516692393.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:34.160Z,1516692394.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:34.559Z,1516692394.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:34.966Z,1516692394.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:35.365Z,1516692395.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:35.762Z,1516692395.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:36.165Z,1516692396.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:36.556Z,1516692396.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:36.966Z,1516692396.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:37.357Z,1516692397.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:37.763Z,1516692397.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:38.168Z,1516692398.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:38.567Z,1516692398.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:38.954Z,1516692398.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:39.355Z,1516692399.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:39.773Z,1516692399.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:40.173Z,1516692400.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:40.566Z,1516692400.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:40.960Z,1516692400.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:41.365Z,1516692401.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:41.765Z,1516692401.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:42.167Z,1516692402.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:42.563Z,1516692402.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:42.958Z,1516692402.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:43.364Z,1516692403.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:43.771Z,1516692403.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:44.167Z,1516692404.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:44.576Z,1516692404.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:44.961Z,1516692404.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:45.369Z,1516692405.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:45.764Z,1516692405.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:46.175Z,1516692406.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:46.573Z,1516692406.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:46.965Z,1516692406.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:47.362Z,1516692407.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:47.776Z,1516692407.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:48.166Z,1516692408.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:48.570Z,1516692408.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:48.960Z,1516692408.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:49.366Z,1516692409.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:49.763Z,1516692409.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:50.173Z,1516692410.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:50.571Z,1516692410.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:50.960Z,1516692410.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:51.364Z,1516692411.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:51.766Z,1516692411.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:52.173Z,1516692412.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:52.565Z,1516692412.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:52.957Z,1516692412.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:53.364Z,1516692413.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:53.724Z,1516692413.724 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T07:26:53.724Z,1516692413.724 [NAL9602] Data Fault, FailCount= 3 2018-01-23T07:26:53.724Z,1516692413.724 [NAL9602](ERROR): Data Fault 2018-01-23T07:26:53.780Z,1516692413.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:53.805Z,1516692413.805 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T07:26:54.112Z,1516692414.112 [NAL9602](INFO): Powering down 2018-01-23T07:26:54.165Z,1516692414.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:54.562Z,1516692414.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:54.961Z,1516692414.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:54.989Z,1516692414.989 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T07:26:54.989Z,1516692414.989 [NAL9602] No Fault, FailCount= 3 2018-01-23T07:26:55.346Z,1516692415.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:55.769Z,1516692415.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:56.138Z,1516692416.138 [PNI_TCM](ERROR): CRC does not match. Expected:0x33652 got:0x26048 2018-01-23T07:26:56.172Z,1516692416.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:56.542Z,1516692416.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:56.972Z,1516692416.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:57.354Z,1516692417.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:57.753Z,1516692417.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:58.154Z,1516692418.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:58.547Z,1516692418.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:58.954Z,1516692418.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:59.348Z,1516692419.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:26:59.755Z,1516692419.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:00.148Z,1516692420.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:00.581Z,1516692420.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:00.949Z,1516692420.949 [PNI_TCM](ERROR): CRC does not match. Expected:0x49584 got:0x0 2018-01-23T07:27:00.980Z,1516692420.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:01.353Z,1516692421.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:01.753Z,1516692421.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:02.161Z,1516692422.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:02.550Z,1516692422.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:02.955Z,1516692422.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:03.364Z,1516692423.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:03.765Z,1516692423.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:04.150Z,1516692424.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T07:27:04.184Z,1516692424.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:04.560Z,1516692424.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:04.951Z,1516692424.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:05.369Z,1516692425.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:05.759Z,1516692425.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:06.152Z,1516692426.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:06.560Z,1516692426.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:06.973Z,1516692426.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:07.361Z,1516692427.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:07.765Z,1516692427.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:08.156Z,1516692428.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:08.561Z,1516692428.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:08.957Z,1516692428.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:09.365Z,1516692429.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:09.755Z,1516692429.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:10.170Z,1516692430.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:10.560Z,1516692430.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:10.954Z,1516692430.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:11.354Z,1516692431.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:11.772Z,1516692431.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:12.161Z,1516692432.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:15.257Z,1516692435.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:15.394Z,1516692435.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:15.742Z,1516692435.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:16.119Z,1516692436.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:16.528Z,1516692436.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:16.921Z,1516692436.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:17.322Z,1516692437.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:17.720Z,1516692437.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:18.125Z,1516692438.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:18.533Z,1516692438.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:18.924Z,1516692438.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:19.321Z,1516692439.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:19.722Z,1516692439.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:20.129Z,1516692440.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:20.521Z,1516692440.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:20.920Z,1516692440.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:21.321Z,1516692441.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:21.725Z,1516692441.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:22.119Z,1516692442.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:22.522Z,1516692442.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:22.922Z,1516692442.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:23.322Z,1516692443.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:23.722Z,1516692443.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:24.122Z,1516692444.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:24.481Z,1516692444.481 [NAL9602](INFO): Powering up NAL9602 2018-01-23T07:27:24.522Z,1516692444.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:24.923Z,1516692444.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:25.328Z,1516692445.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:25.722Z,1516692445.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:26.137Z,1516692446.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:26.522Z,1516692446.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:26.931Z,1516692446.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:27.323Z,1516692447.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:27.729Z,1516692447.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:28.130Z,1516692448.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:28.522Z,1516692448.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:28.926Z,1516692448.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:29.322Z,1516692449.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:29.723Z,1516692449.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:30.128Z,1516692450.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:30.530Z,1516692450.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:30.922Z,1516692450.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:31.322Z,1516692451.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:31.722Z,1516692451.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:32.122Z,1516692452.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:32.528Z,1516692452.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:32.931Z,1516692452.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:33.323Z,1516692453.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:33.728Z,1516692453.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:34.130Z,1516692454.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:34.523Z,1516692454.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:34.940Z,1516692454.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:35.288Z,1516692455.288 [NAL9602](INFO): NAL9602 initialized 2018-01-23T07:27:35.338Z,1516692455.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:35.729Z,1516692455.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:36.133Z,1516692456.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:36.541Z,1516692456.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:36.934Z,1516692456.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:37.334Z,1516692457.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:37.726Z,1516692457.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:38.131Z,1516692458.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:38.534Z,1516692458.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:38.938Z,1516692458.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:39.335Z,1516692459.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:39.732Z,1516692459.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:40.121Z,1516692460.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:40.531Z,1516692460.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:40.931Z,1516692460.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:41.341Z,1516692461.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:41.738Z,1516692461.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:42.143Z,1516692462.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:42.513Z,1516692462.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:42.940Z,1516692462.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:43.316Z,1516692463.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:43.717Z,1516692463.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:44.148Z,1516692464.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:44.550Z,1516692464.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:44.927Z,1516692464.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:45.327Z,1516692465.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:45.727Z,1516692465.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:46.124Z,1516692466.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:46.526Z,1516692466.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:46.924Z,1516692466.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:47.334Z,1516692467.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:47.730Z,1516692467.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:47.730Z,1516692467.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-01-23T07:27:47.730Z,1516692467.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:27:47.733Z,1516692467.733 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:47.733Z,1516692467.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-01-23T07:27:47.733Z,1516692467.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:27:47.735Z,1516692467.735 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:47.735Z,1516692467.735 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84 2018-01-23T07:27:47.735Z,1516692467.735 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:27:47.767Z,1516692467.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:27:47.768Z,1516692467.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:27:47.768Z,1516692467.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:27:48.172Z,1516692468.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:27:48.172Z,1516692468.172 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-01-23T07:27:48.173Z,1516692468.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:27:48.173Z,1516692468.173 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-01-23T07:27:48.173Z,1516692468.173 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:27:48.173Z,1516692468.173 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84 2018-01-23T07:27:48.524Z,1516692468.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:27:48.525Z,1516692468.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:27:48.525Z,1516692468.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:27:48.526Z,1516692468.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:27:48.526Z,1516692468.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:27:48.526Z,1516692468.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:27:48.527Z,1516692468.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:27:48.527Z,1516692468.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:27:48.528Z,1516692468.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:27:48.930Z,1516692468.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:27:48.935Z,1516692468.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:49.336Z,1516692469.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:27:49.337Z,1516692469.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:49.732Z,1516692469.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:27:49.733Z,1516692469.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:50.131Z,1516692470.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:27:50.132Z,1516692470.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:50.536Z,1516692470.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:27:50.537Z,1516692470.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:50.945Z,1516692470.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:27:50.946Z,1516692470.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:51.341Z,1516692471.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:27:51.342Z,1516692471.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:51.745Z,1516692471.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:27:51.746Z,1516692471.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:52.146Z,1516692472.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:27:52.147Z,1516692472.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:52.543Z,1516692472.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:27:52.544Z,1516692472.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:52.924Z,1516692472.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:27:52.925Z,1516692472.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:53.330Z,1516692473.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:27:53.331Z,1516692473.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:53.730Z,1516692473.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:27:53.731Z,1516692473.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:54.126Z,1516692474.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:27:54.127Z,1516692474.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:54.525Z,1516692474.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:27:54.526Z,1516692474.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:54.922Z,1516692474.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:27:54.924Z,1516692474.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:55.332Z,1516692475.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:27:55.333Z,1516692475.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:55.732Z,1516692475.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:27:55.733Z,1516692475.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:56.126Z,1516692476.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:27:56.127Z,1516692476.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:56.537Z,1516692476.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:27:56.538Z,1516692476.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:56.944Z,1516692476.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:27:56.945Z,1516692476.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:57.337Z,1516692477.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:27:57.338Z,1516692477.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:57.725Z,1516692477.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:27:57.726Z,1516692477.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:58.132Z,1516692478.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:27:58.133Z,1516692478.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:58.524Z,1516692478.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:27:58.525Z,1516692478.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:58.929Z,1516692478.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:27:58.930Z,1516692478.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:59.345Z,1516692479.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:27:59.346Z,1516692479.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:27:59.737Z,1516692479.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:27:59.738Z,1516692479.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:00.134Z,1516692480.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:28:00.135Z,1516692480.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:00.532Z,1516692480.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:28:00.533Z,1516692480.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:00.931Z,1516692480.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:28:00.932Z,1516692480.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:01.332Z,1516692481.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:28:01.332Z,1516692481.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:01.732Z,1516692481.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:28:01.733Z,1516692481.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:02.131Z,1516692482.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:28:02.132Z,1516692482.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:02.545Z,1516692482.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:28:02.546Z,1516692482.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:02.937Z,1516692482.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:28:02.938Z,1516692482.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:03.335Z,1516692483.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:28:03.336Z,1516692483.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:03.732Z,1516692483.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:28:03.733Z,1516692483.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:04.125Z,1516692484.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:28:04.126Z,1516692484.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:04.535Z,1516692484.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:28:04.536Z,1516692484.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:04.932Z,1516692484.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:28:04.932Z,1516692484.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:05.345Z,1516692485.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:28:05.346Z,1516692485.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:05.738Z,1516692485.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:28:05.739Z,1516692485.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:06.144Z,1516692486.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:28:06.145Z,1516692486.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:06.525Z,1516692486.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:28:06.526Z,1516692486.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:06.931Z,1516692486.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:28:06.932Z,1516692486.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:07.338Z,1516692487.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:28:07.340Z,1516692487.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:07.734Z,1516692487.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:08.131Z,1516692488.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:08.536Z,1516692488.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:08.942Z,1516692488.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:09.337Z,1516692489.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:09.731Z,1516692489.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:10.136Z,1516692490.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:10.528Z,1516692490.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:10.940Z,1516692490.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:11.336Z,1516692491.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:11.748Z,1516692491.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:12.145Z,1516692492.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:12.537Z,1516692492.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:15.640Z,1516692495.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:15.769Z,1516692495.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:16.145Z,1516692496.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:16.551Z,1516692496.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:16.942Z,1516692496.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:17.356Z,1516692497.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:17.795Z,1516692497.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:18.151Z,1516692498.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:18.552Z,1516692498.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:18.930Z,1516692498.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:19.351Z,1516692499.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:19.758Z,1516692499.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:20.120Z,1516692500.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:20.532Z,1516692500.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:20.928Z,1516692500.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:21.358Z,1516692501.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:21.742Z,1516692501.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:22.140Z,1516692502.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:22.527Z,1516692502.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:22.933Z,1516692502.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:23.327Z,1516692503.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:23.730Z,1516692503.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:24.128Z,1516692504.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:24.534Z,1516692504.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:24.939Z,1516692504.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:25.338Z,1516692505.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:25.727Z,1516692505.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:26.126Z,1516692506.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:26.535Z,1516692506.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:26.927Z,1516692506.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:27.345Z,1516692507.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:27.741Z,1516692507.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:28.141Z,1516692508.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:28.527Z,1516692508.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:28.937Z,1516692508.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:29.327Z,1516692509.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:29.730Z,1516692509.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:30.130Z,1516692510.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:30.544Z,1516692510.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:30.940Z,1516692510.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:31.339Z,1516692511.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:31.736Z,1516692511.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:32.134Z,1516692512.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:32.540Z,1516692512.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:32.930Z,1516692512.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:33.341Z,1516692513.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:33.753Z,1516692513.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:34.143Z,1516692514.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:34.541Z,1516692514.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:34.940Z,1516692514.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:35.340Z,1516692515.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:35.729Z,1516692515.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:36.141Z,1516692516.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:36.549Z,1516692516.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:36.953Z,1516692516.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:37.349Z,1516692517.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:37.718Z,1516692517.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:38.119Z,1516692518.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:38.520Z,1516692518.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:38.926Z,1516692518.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:39.359Z,1516692519.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:39.754Z,1516692519.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:40.152Z,1516692520.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:40.520Z,1516692520.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:40.957Z,1516692520.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:41.358Z,1516692521.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:41.732Z,1516692521.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:42.128Z,1516692522.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:42.534Z,1516692522.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:42.930Z,1516692522.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:43.330Z,1516692523.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:43.726Z,1516692523.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:44.127Z,1516692524.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:44.528Z,1516692524.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:44.925Z,1516692524.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:45.330Z,1516692525.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:45.734Z,1516692525.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:46.161Z,1516692526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:46.525Z,1516692526.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:46.926Z,1516692526.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:47.326Z,1516692527.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:47.729Z,1516692527.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:48.133Z,1516692528.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:48.536Z,1516692528.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:48.938Z,1516692528.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:49.334Z,1516692529.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:49.732Z,1516692529.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:50.125Z,1516692530.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:50.533Z,1516692530.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:50.930Z,1516692530.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:51.337Z,1516692531.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:51.738Z,1516692531.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:52.136Z,1516692532.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:52.527Z,1516692532.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:52.926Z,1516692532.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:53.326Z,1516692533.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:53.729Z,1516692533.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:54.128Z,1516692534.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:54.540Z,1516692534.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:54.937Z,1516692534.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:55.337Z,1516692535.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:55.732Z,1516692535.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:56.125Z,1516692536.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:56.530Z,1516692536.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:56.938Z,1516692536.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:57.340Z,1516692537.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:57.742Z,1516692537.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:58.138Z,1516692538.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:58.529Z,1516692538.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:58.933Z,1516692538.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:59.340Z,1516692539.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:28:59.733Z,1516692539.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:00.133Z,1516692540.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:00.547Z,1516692540.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:00.939Z,1516692540.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:01.345Z,1516692541.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:01.731Z,1516692541.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:02.136Z,1516692542.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:02.535Z,1516692542.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:02.937Z,1516692542.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:03.346Z,1516692543.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:03.749Z,1516692543.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:04.142Z,1516692544.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:04.520Z,1516692544.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:04.945Z,1516692544.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:05.350Z,1516692545.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:05.750Z,1516692545.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:06.158Z,1516692546.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:06.532Z,1516692546.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:06.927Z,1516692546.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:07.357Z,1516692547.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:07.738Z,1516692547.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:08.142Z,1516692548.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:08.531Z,1516692548.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:08.940Z,1516692548.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:09.329Z,1516692549.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:09.731Z,1516692549.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:10.130Z,1516692550.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:10.538Z,1516692550.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:10.942Z,1516692550.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:11.338Z,1516692551.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:11.729Z,1516692551.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:12.137Z,1516692552.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:12.537Z,1516692552.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:15.631Z,1516692555.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:15.784Z,1516692555.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:16.102Z,1516692556.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:16.528Z,1516692556.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:16.892Z,1516692556.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:17.294Z,1516692557.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:17.700Z,1516692557.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:18.092Z,1516692558.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:18.498Z,1516692558.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:18.900Z,1516692558.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:19.305Z,1516692559.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:19.700Z,1516692559.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:20.095Z,1516692560.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:20.492Z,1516692560.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:20.894Z,1516692560.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:21.295Z,1516692561.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:21.698Z,1516692561.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:22.102Z,1516692562.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:22.498Z,1516692562.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:22.893Z,1516692562.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:23.300Z,1516692563.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:23.695Z,1516692563.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:24.092Z,1516692564.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:24.498Z,1516692564.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:24.900Z,1516692564.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:25.298Z,1516692565.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:25.694Z,1516692565.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:26.095Z,1516692566.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:26.492Z,1516692566.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:26.899Z,1516692566.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:27.300Z,1516692567.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:27.709Z,1516692567.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:28.106Z,1516692568.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:28.512Z,1516692568.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:28.893Z,1516692568.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:29.304Z,1516692569.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:29.697Z,1516692569.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:30.105Z,1516692570.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:30.517Z,1516692570.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:30.909Z,1516692570.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:31.309Z,1516692571.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:31.697Z,1516692571.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:32.099Z,1516692572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:32.502Z,1516692572.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:32.901Z,1516692572.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:33.308Z,1516692573.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:33.710Z,1516692573.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:34.110Z,1516692574.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:34.509Z,1516692574.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:34.893Z,1516692574.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:35.307Z,1516692575.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:35.704Z,1516692575.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:36.085Z,1516692576.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:36.521Z,1516692576.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:36.914Z,1516692576.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:37.313Z,1516692577.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:37.693Z,1516692577.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:38.116Z,1516692578.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:38.493Z,1516692578.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:38.894Z,1516692578.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:39.301Z,1516692579.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:39.724Z,1516692579.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:40.119Z,1516692580.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:40.527Z,1516692580.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:40.894Z,1516692580.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:41.296Z,1516692581.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:41.704Z,1516692581.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:42.105Z,1516692582.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:42.513Z,1516692582.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:42.905Z,1516692582.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:43.305Z,1516692583.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:43.696Z,1516692583.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:44.096Z,1516692584.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:44.495Z,1516692584.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:44.898Z,1516692584.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:45.301Z,1516692585.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:45.710Z,1516692585.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:46.109Z,1516692586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:46.513Z,1516692586.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:46.902Z,1516692586.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:47.309Z,1516692587.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:47.705Z,1516692587.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:48.108Z,1516692588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:48.516Z,1516692588.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:48.921Z,1516692588.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:49.313Z,1516692589.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:49.709Z,1516692589.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:50.089Z,1516692590.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:50.494Z,1516692590.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:50.901Z,1516692590.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:51.296Z,1516692591.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:51.704Z,1516692591.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:52.103Z,1516692592.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:52.499Z,1516692592.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:52.894Z,1516692592.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:53.301Z,1516692593.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:53.696Z,1516692593.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:54.094Z,1516692594.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:54.505Z,1516692594.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:54.901Z,1516692594.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:55.305Z,1516692595.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:55.705Z,1516692595.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:56.095Z,1516692596.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:56.494Z,1516692596.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:56.904Z,1516692596.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:57.295Z,1516692597.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:57.705Z,1516692597.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:58.114Z,1516692598.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:58.512Z,1516692598.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:58.905Z,1516692598.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:59.302Z,1516692599.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:29:59.700Z,1516692599.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:00.105Z,1516692600.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:00.506Z,1516692600.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:00.910Z,1516692600.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:01.306Z,1516692601.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:01.705Z,1516692601.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:02.101Z,1516692602.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:02.509Z,1516692602.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:02.901Z,1516692602.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:03.304Z,1516692603.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:03.706Z,1516692603.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:04.112Z,1516692604.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:04.507Z,1516692604.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:04.903Z,1516692604.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:05.303Z,1516692605.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:05.704Z,1516692605.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:06.109Z,1516692606.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:06.508Z,1516692606.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:06.910Z,1516692606.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:07.308Z,1516692607.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:07.713Z,1516692607.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:08.104Z,1516692608.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:08.507Z,1516692608.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:08.904Z,1516692608.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:09.309Z,1516692609.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:09.721Z,1516692609.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:10.114Z,1516692610.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:10.509Z,1516692610.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:10.907Z,1516692610.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:10.910Z,1516692610.910 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:25:10.6Z 2018-01-23T07:30:10.910Z,1516692610.910 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T07:30:10.910Z,1516692610.910 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T07:30:11.307Z,1516692611.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:11.816Z,1516692611.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:12.107Z,1516692612.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:15.212Z,1516692615.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:15.292Z,1516692615.292 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0100.lzma 2018-01-23T07:30:15.354Z,1516692615.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:15.700Z,1516692615.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:16.045Z,1516692616.045 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0100.lzma.bak 2018-01-23T07:30:16.045Z,1516692616.045 [DataOverHttps](INFO): SBD MOMSN=7755209 2018-01-23T07:30:16.086Z,1516692616.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:16.716Z,1516692616.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:16.881Z,1516692616.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:20.130Z,1516692620.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:20.281Z,1516692620.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:20.622Z,1516692620.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:21.024Z,1516692621.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:21.421Z,1516692621.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:21.822Z,1516692621.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:24.954Z,1516692624.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:25.011Z,1516692625.011 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0101.lzma 2018-01-23T07:30:25.092Z,1516692625.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:25.426Z,1516692625.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:25.777Z,1516692625.777 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0101.lzma.bak 2018-01-23T07:30:25.777Z,1516692625.777 [DataOverHttps](INFO): SBD MOMSN=7755211 2018-01-23T07:30:25.856Z,1516692625.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:26.455Z,1516692626.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:26.458Z,1516692626.458 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T07:30:26.458Z,1516692626.458 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T07:30:26.458Z,1516692626.458 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T07:30:26.623Z,1516692626.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:29.718Z,1516692629.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:29.857Z,1516692629.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:30.211Z,1516692630.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:30.616Z,1516692630.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:30.985Z,1516692630.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:31.384Z,1516692631.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:31.785Z,1516692631.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:32.186Z,1516692632.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:32.593Z,1516692632.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:32.993Z,1516692632.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:33.397Z,1516692633.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:33.785Z,1516692633.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:34.196Z,1516692634.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:34.586Z,1516692634.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:34.990Z,1516692634.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:35.424Z,1516692635.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:35.802Z,1516692635.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:36.254Z,1516692636.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:36.646Z,1516692636.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:36.998Z,1516692636.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:37.439Z,1516692637.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:37.801Z,1516692637.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:38.210Z,1516692638.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:38.605Z,1516692638.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:39.034Z,1516692639.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:39.397Z,1516692639.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:39.806Z,1516692639.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:40.214Z,1516692640.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:40.586Z,1516692640.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:41.014Z,1516692641.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:41.411Z,1516692641.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:41.821Z,1516692641.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:42.256Z,1516692642.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:42.622Z,1516692642.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:43.025Z,1516692643.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:43.444Z,1516692643.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:43.843Z,1516692643.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:44.193Z,1516692644.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:44.600Z,1516692644.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:45.028Z,1516692645.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:45.405Z,1516692645.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:45.801Z,1516692645.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:46.225Z,1516692646.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:46.599Z,1516692646.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:47.035Z,1516692647.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:47.398Z,1516692647.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:47.801Z,1516692647.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:48.201Z,1516692648.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:48.599Z,1516692648.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:48.599Z,1516692648.599 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-01-23T07:30:48.600Z,1516692648.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:30:48.601Z,1516692648.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:48.601Z,1516692648.601 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-01-23T07:30:48.601Z,1516692648.601 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:30:48.603Z,1516692648.603 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:48.603Z,1516692648.603 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85 2018-01-23T07:30:48.603Z,1516692648.603 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:30:48.636Z,1516692648.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:30:48.636Z,1516692648.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:30:48.636Z,1516692648.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:30:49.002Z,1516692649.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:30:49.002Z,1516692649.002 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-01-23T07:30:49.007Z,1516692649.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:30:49.007Z,1516692649.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-01-23T07:30:49.008Z,1516692649.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:30:49.008Z,1516692649.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85 2018-01-23T07:30:49.400Z,1516692649.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:30:49.400Z,1516692649.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:30:49.400Z,1516692649.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:30:49.401Z,1516692649.401 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:30:49.401Z,1516692649.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:30:49.402Z,1516692649.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:30:49.402Z,1516692649.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:30:49.402Z,1516692649.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:30:49.407Z,1516692649.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:30:49.780Z,1516692649.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:30:49.781Z,1516692649.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:50.173Z,1516692650.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:30:50.174Z,1516692650.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:50.603Z,1516692650.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:30:50.604Z,1516692650.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:51.008Z,1516692651.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:30:51.009Z,1516692651.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:51.421Z,1516692651.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:30:51.422Z,1516692651.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:51.784Z,1516692651.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:30:51.785Z,1516692651.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:52.179Z,1516692652.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:30:52.180Z,1516692652.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:52.575Z,1516692652.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:30:52.576Z,1516692652.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:52.987Z,1516692652.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:30:52.988Z,1516692652.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:53.385Z,1516692653.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:30:53.385Z,1516692653.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:53.813Z,1516692653.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:30:53.814Z,1516692653.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:54.193Z,1516692654.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:30:54.194Z,1516692654.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:54.597Z,1516692654.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:30:54.598Z,1516692654.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:54.986Z,1516692654.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:30:54.991Z,1516692654.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:55.387Z,1516692655.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:30:55.388Z,1516692655.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:55.785Z,1516692655.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:30:55.786Z,1516692655.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:56.183Z,1516692656.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:30:56.184Z,1516692656.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:56.617Z,1516692656.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:30:56.618Z,1516692656.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:56.992Z,1516692656.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:30:56.993Z,1516692656.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:57.417Z,1516692657.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:30:57.418Z,1516692657.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:57.791Z,1516692657.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:30:57.792Z,1516692657.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:58.184Z,1516692658.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:30:58.185Z,1516692658.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:58.583Z,1516692658.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:30:58.584Z,1516692658.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:58.986Z,1516692658.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:30:58.991Z,1516692658.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:59.400Z,1516692659.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:30:59.401Z,1516692659.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:30:59.801Z,1516692659.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:30:59.802Z,1516692659.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:00.201Z,1516692660.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:31:00.202Z,1516692660.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:00.593Z,1516692660.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:31:00.594Z,1516692660.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:00.985Z,1516692660.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:31:00.986Z,1516692660.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:01.399Z,1516692661.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:31:01.400Z,1516692661.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:01.792Z,1516692661.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:31:01.793Z,1516692661.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:02.179Z,1516692662.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:31:02.180Z,1516692662.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:02.609Z,1516692662.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:31:02.610Z,1516692662.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:02.993Z,1516692662.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:31:02.994Z,1516692662.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:03.393Z,1516692663.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:31:03.394Z,1516692663.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:03.784Z,1516692663.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:31:03.785Z,1516692663.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:04.186Z,1516692664.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:31:04.187Z,1516692664.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:04.586Z,1516692664.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:31:04.587Z,1516692664.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:04.989Z,1516692664.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:31:04.990Z,1516692664.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:05.389Z,1516692665.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:31:05.390Z,1516692665.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:05.789Z,1516692665.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:31:05.790Z,1516692665.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:06.190Z,1516692666.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:31:06.191Z,1516692666.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:06.591Z,1516692666.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:31:06.592Z,1516692666.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:06.984Z,1516692666.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:31:06.985Z,1516692666.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:07.386Z,1516692667.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:31:07.391Z,1516692667.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:07.789Z,1516692667.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:31:07.790Z,1516692667.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:08.185Z,1516692668.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:31:08.186Z,1516692668.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:08.593Z,1516692668.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:31:08.594Z,1516692668.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:09.003Z,1516692669.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:09.401Z,1516692669.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:09.788Z,1516692669.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:10.189Z,1516692670.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:10.588Z,1516692670.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:10.989Z,1516692670.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:11.395Z,1516692671.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:11.795Z,1516692671.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:12.209Z,1516692672.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:12.609Z,1516692672.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:12.990Z,1516692672.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:13.391Z,1516692673.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:13.793Z,1516692673.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:14.195Z,1516692674.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:14.604Z,1516692674.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:15.011Z,1516692675.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:15.404Z,1516692675.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:15.802Z,1516692675.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:16.201Z,1516692676.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:16.600Z,1516692676.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:17.002Z,1516692677.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:17.397Z,1516692677.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:17.805Z,1516692677.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:18.207Z,1516692678.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:18.618Z,1516692678.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:18.980Z,1516692678.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:19.386Z,1516692679.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:19.785Z,1516692679.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:20.187Z,1516692680.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:20.618Z,1516692680.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:20.993Z,1516692680.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:21.389Z,1516692681.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:21.787Z,1516692681.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:22.189Z,1516692682.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:22.589Z,1516692682.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:22.986Z,1516692682.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:23.387Z,1516692683.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:23.801Z,1516692683.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:24.201Z,1516692684.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:24.594Z,1516692684.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:24.987Z,1516692684.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:25.388Z,1516692685.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:25.789Z,1516692685.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:26.185Z,1516692686.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:26.603Z,1516692686.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:26.999Z,1516692686.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:30.113Z,1516692690.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:30.239Z,1516692690.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:30.608Z,1516692690.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:31.025Z,1516692691.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:31.408Z,1516692691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:31.833Z,1516692691.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:32.237Z,1516692692.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:32.610Z,1516692692.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:33.012Z,1516692693.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:33.409Z,1516692693.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:33.807Z,1516692693.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:34.223Z,1516692694.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:34.625Z,1516692694.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:35.022Z,1516692695.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:35.424Z,1516692695.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:35.812Z,1516692695.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:36.213Z,1516692696.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:36.615Z,1516692696.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:37.021Z,1516692697.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:37.407Z,1516692697.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:37.828Z,1516692697.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:38.231Z,1516692698.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:38.631Z,1516692698.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:39.020Z,1516692699.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:39.419Z,1516692699.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:39.813Z,1516692699.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:40.225Z,1516692700.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:40.629Z,1516692700.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:41.031Z,1516692701.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:41.432Z,1516692701.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:41.828Z,1516692701.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:42.199Z,1516692702.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:42.626Z,1516692702.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:43.025Z,1516692703.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:43.433Z,1516692703.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:43.833Z,1516692703.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:44.237Z,1516692704.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:44.625Z,1516692704.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:45.028Z,1516692705.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:45.406Z,1516692705.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:45.814Z,1516692705.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:46.224Z,1516692706.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:46.622Z,1516692706.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:47.042Z,1516692707.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:47.416Z,1516692707.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:47.816Z,1516692707.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:48.211Z,1516692708.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:48.613Z,1516692708.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:49.014Z,1516692709.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:49.411Z,1516692709.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:49.821Z,1516692709.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:50.218Z,1516692710.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:50.615Z,1516692710.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:51.016Z,1516692711.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:51.413Z,1516692711.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:51.812Z,1516692711.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:52.212Z,1516692712.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:52.617Z,1516692712.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:53.016Z,1516692713.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:53.420Z,1516692713.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:53.814Z,1516692713.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:54.212Z,1516692714.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:54.612Z,1516692714.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:55.021Z,1516692715.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:55.429Z,1516692715.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:55.814Z,1516692715.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x34647 got:0x45085 2018-01-23T07:31:55.849Z,1516692715.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:56.225Z,1516692716.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:56.622Z,1516692716.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:57.025Z,1516692717.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:57.416Z,1516692717.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:57.814Z,1516692717.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:58.220Z,1516692718.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:58.628Z,1516692718.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:59.026Z,1516692719.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:59.422Z,1516692719.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:31:59.821Z,1516692719.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:00.212Z,1516692720.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:00.621Z,1516692720.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:01.018Z,1516692721.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:01.413Z,1516692721.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:01.825Z,1516692721.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:02.225Z,1516692722.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:02.620Z,1516692722.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:03.020Z,1516692723.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:03.420Z,1516692723.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:03.815Z,1516692723.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:04.224Z,1516692724.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:04.629Z,1516692724.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:05.041Z,1516692725.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:05.420Z,1516692725.420 [PNI_TCM](ERROR): CRC does not match. Expected:0x48151 got:0x3629 2018-01-23T07:32:05.444Z,1516692725.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:05.818Z,1516692725.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:06.195Z,1516692726.195 [PNI_TCM](ERROR): CRC does not match. Expected:0x20571 got:0x3794 2018-01-23T07:32:06.224Z,1516692726.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:06.625Z,1516692726.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:07.038Z,1516692727.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:07.424Z,1516692727.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:07.820Z,1516692727.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:08.228Z,1516692728.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:08.627Z,1516692728.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:09.036Z,1516692729.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:09.429Z,1516692729.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:09.841Z,1516692729.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:10.224Z,1516692730.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:10.637Z,1516692730.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:11.030Z,1516692731.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:11.448Z,1516692731.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:11.806Z,1516692731.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:12.230Z,1516692732.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:12.637Z,1516692732.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:13.033Z,1516692733.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:13.434Z,1516692733.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:13.835Z,1516692733.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:14.206Z,1516692734.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:14.647Z,1516692734.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:15.038Z,1516692735.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:15.436Z,1516692735.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:15.831Z,1516692735.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:16.207Z,1516692736.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:16.618Z,1516692736.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:17.016Z,1516692737.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:17.443Z,1516692737.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:17.835Z,1516692737.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:18.206Z,1516692738.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:18.610Z,1516692738.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:19.014Z,1516692739.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:19.422Z,1516692739.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:19.813Z,1516692739.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:20.208Z,1516692740.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:20.617Z,1516692740.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:21.013Z,1516692741.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:21.426Z,1516692741.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:21.823Z,1516692741.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:22.217Z,1516692742.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:22.618Z,1516692742.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:23.027Z,1516692743.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:23.432Z,1516692743.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:23.821Z,1516692743.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:24.209Z,1516692744.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:24.626Z,1516692744.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:25.030Z,1516692745.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:25.426Z,1516692745.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:25.813Z,1516692745.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:26.197Z,1516692746.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:26.621Z,1516692746.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:27.037Z,1516692747.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:30.129Z,1516692750.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:30.249Z,1516692750.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:30.628Z,1516692750.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:31.005Z,1516692751.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:31.402Z,1516692751.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:31.834Z,1516692751.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:32.204Z,1516692752.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:32.602Z,1516692752.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:33.001Z,1516692753.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:33.404Z,1516692753.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:33.803Z,1516692753.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:34.209Z,1516692754.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:34.607Z,1516692754.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:35.013Z,1516692755.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:35.417Z,1516692755.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:35.806Z,1516692755.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:36.239Z,1516692756.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:36.621Z,1516692756.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:37.018Z,1516692757.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:37.414Z,1516692757.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:37.809Z,1516692757.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:38.202Z,1516692758.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:38.612Z,1516692758.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:39.021Z,1516692759.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:39.420Z,1516692759.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:39.808Z,1516692759.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:40.208Z,1516692760.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:40.602Z,1516692760.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:41.014Z,1516692761.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:41.418Z,1516692761.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:41.809Z,1516692761.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:42.208Z,1516692762.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:42.610Z,1516692762.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:43.003Z,1516692763.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:43.401Z,1516692763.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:43.818Z,1516692763.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:44.221Z,1516692764.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:44.610Z,1516692764.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:45.013Z,1516692765.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:45.402Z,1516692765.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:45.805Z,1516692765.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:46.208Z,1516692766.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:46.608Z,1516692766.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:47.010Z,1516692767.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:47.420Z,1516692767.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:47.814Z,1516692767.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:48.208Z,1516692768.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:48.608Z,1516692768.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:49.011Z,1516692769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:49.413Z,1516692769.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:49.818Z,1516692769.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:50.214Z,1516692770.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:50.611Z,1516692770.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:51.017Z,1516692771.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:51.408Z,1516692771.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:51.809Z,1516692771.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:52.208Z,1516692772.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:52.602Z,1516692772.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:53.012Z,1516692773.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:53.425Z,1516692773.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:53.814Z,1516692773.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:54.208Z,1516692774.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:54.617Z,1516692774.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:55.003Z,1516692775.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:55.405Z,1516692775.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:55.817Z,1516692775.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:56.214Z,1516692776.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:56.612Z,1516692776.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:57.017Z,1516692777.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:57.409Z,1516692777.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:57.805Z,1516692777.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:58.210Z,1516692778.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:58.609Z,1516692778.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:59.011Z,1516692779.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:59.422Z,1516692779.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:32:59.815Z,1516692779.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:00.208Z,1516692780.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:00.610Z,1516692780.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:01.004Z,1516692781.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:01.407Z,1516692781.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:01.825Z,1516692781.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:02.220Z,1516692782.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:02.617Z,1516692782.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:03.010Z,1516692783.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:03.410Z,1516692783.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:03.797Z,1516692783.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:04.213Z,1516692784.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:04.613Z,1516692784.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:05.022Z,1516692785.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:05.418Z,1516692785.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:05.812Z,1516692785.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:06.189Z,1516692786.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:06.615Z,1516692786.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:06.991Z,1516692786.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:07.397Z,1516692787.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:07.822Z,1516692787.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:08.224Z,1516692788.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:08.606Z,1516692788.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:09.006Z,1516692789.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:09.401Z,1516692789.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:09.802Z,1516692789.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:10.203Z,1516692790.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:10.601Z,1516692790.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:11.003Z,1516692791.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:11.414Z,1516692791.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:11.807Z,1516692791.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:12.200Z,1516692792.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:12.606Z,1516692792.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:13.004Z,1516692793.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:13.404Z,1516692793.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:13.807Z,1516692793.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:14.206Z,1516692794.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:14.609Z,1516692794.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:15.003Z,1516692795.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:15.400Z,1516692795.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:15.798Z,1516692795.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:16.209Z,1516692796.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:16.603Z,1516692796.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:17.013Z,1516692797.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:17.410Z,1516692797.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:17.810Z,1516692797.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:18.200Z,1516692798.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:18.607Z,1516692798.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:19.005Z,1516692799.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:19.404Z,1516692799.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:19.810Z,1516692799.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:20.209Z,1516692800.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:20.610Z,1516692800.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:21.007Z,1516692801.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:21.405Z,1516692801.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:21.803Z,1516692801.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:22.213Z,1516692802.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:22.608Z,1516692802.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:23.005Z,1516692803.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:23.414Z,1516692803.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:23.810Z,1516692803.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:24.197Z,1516692804.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:24.603Z,1516692804.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:25.001Z,1516692805.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:25.409Z,1516692805.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:25.817Z,1516692805.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:26.209Z,1516692806.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:26.610Z,1516692806.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:27.003Z,1516692807.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:27.401Z,1516692807.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:30.493Z,1516692810.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:30.643Z,1516692810.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:30.973Z,1516692810.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:31.418Z,1516692811.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:31.773Z,1516692811.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:32.169Z,1516692812.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:32.564Z,1516692812.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:32.965Z,1516692812.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:33.359Z,1516692813.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:33.771Z,1516692813.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:34.180Z,1516692814.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:34.570Z,1516692814.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:34.964Z,1516692814.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:35.364Z,1516692815.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:35.763Z,1516692815.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:36.162Z,1516692816.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:36.563Z,1516692816.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:36.970Z,1516692816.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:37.376Z,1516692817.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:37.773Z,1516692817.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:38.163Z,1516692818.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:38.565Z,1516692818.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:38.964Z,1516692818.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:39.362Z,1516692819.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:39.776Z,1516692819.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:40.171Z,1516692820.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:40.573Z,1516692820.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:40.973Z,1516692820.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:41.368Z,1516692821.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:41.773Z,1516692821.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:42.179Z,1516692822.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:42.577Z,1516692822.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:42.952Z,1516692822.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:43.352Z,1516692823.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:43.757Z,1516692823.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:44.165Z,1516692824.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:44.558Z,1516692824.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:44.969Z,1516692824.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:45.367Z,1516692825.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:45.763Z,1516692825.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:46.167Z,1516692826.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:46.568Z,1516692826.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:46.966Z,1516692826.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:47.368Z,1516692827.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:47.771Z,1516692827.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:48.180Z,1516692828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:48.570Z,1516692828.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:48.970Z,1516692828.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:49.361Z,1516692829.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:49.770Z,1516692829.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:49.770Z,1516692829.770 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-01-23T07:33:49.770Z,1516692829.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:33:49.772Z,1516692829.772 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:49.772Z,1516692829.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-01-23T07:33:49.772Z,1516692829.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:33:49.774Z,1516692829.774 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:49.774Z,1516692829.774 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86 2018-01-23T07:33:49.774Z,1516692829.774 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:33:49.803Z,1516692829.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:33:49.803Z,1516692829.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:33:49.804Z,1516692829.804 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:33:50.198Z,1516692830.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:33:50.203Z,1516692830.203 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-01-23T07:33:50.203Z,1516692830.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:33:50.203Z,1516692830.203 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-01-23T07:33:50.204Z,1516692830.204 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:33:50.204Z,1516692830.204 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86 2018-01-23T07:33:50.575Z,1516692830.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:33:50.576Z,1516692830.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:33:50.576Z,1516692830.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:33:50.577Z,1516692830.577 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:33:50.577Z,1516692830.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:33:50.577Z,1516692830.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:33:50.578Z,1516692830.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:33:50.578Z,1516692830.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:33:50.578Z,1516692830.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:33:50.964Z,1516692830.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:33:50.965Z,1516692830.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:51.369Z,1516692831.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:33:51.370Z,1516692831.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:51.777Z,1516692831.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:33:51.778Z,1516692831.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:52.181Z,1516692832.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:33:52.182Z,1516692832.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:52.572Z,1516692832.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:33:52.573Z,1516692832.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:52.952Z,1516692832.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:33:52.953Z,1516692832.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:53.353Z,1516692833.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:33:53.354Z,1516692833.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:53.784Z,1516692833.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:33:53.785Z,1516692833.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:54.184Z,1516692834.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:33:54.185Z,1516692834.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:54.584Z,1516692834.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:33:54.585Z,1516692834.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:54.960Z,1516692834.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:33:54.961Z,1516692834.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:55.359Z,1516692835.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:33:55.360Z,1516692835.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:55.788Z,1516692835.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:33:55.789Z,1516692835.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:56.170Z,1516692836.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:33:56.183Z,1516692836.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:56.574Z,1516692836.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:33:56.597Z,1516692836.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:56.961Z,1516692836.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:33:56.962Z,1516692836.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:57.362Z,1516692837.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:33:57.363Z,1516692837.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:57.762Z,1516692837.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:33:57.763Z,1516692837.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:58.172Z,1516692838.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:33:58.173Z,1516692838.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:58.564Z,1516692838.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:33:58.565Z,1516692838.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:58.960Z,1516692838.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:33:58.961Z,1516692838.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:59.359Z,1516692839.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:33:59.360Z,1516692839.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:33:59.768Z,1516692839.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:33:59.769Z,1516692839.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:00.165Z,1516692840.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:34:00.166Z,1516692840.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:00.572Z,1516692840.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:34:00.573Z,1516692840.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:00.960Z,1516692840.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:34:00.961Z,1516692840.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:01.368Z,1516692841.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:34:01.369Z,1516692841.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:01.769Z,1516692841.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:34:01.770Z,1516692841.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:02.168Z,1516692842.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:34:02.169Z,1516692842.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:02.569Z,1516692842.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:34:02.570Z,1516692842.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:02.962Z,1516692842.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:34:02.963Z,1516692842.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:03.361Z,1516692843.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:34:03.362Z,1516692843.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:03.789Z,1516692843.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:34:03.790Z,1516692843.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:04.169Z,1516692844.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:34:04.170Z,1516692844.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:04.569Z,1516692844.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:34:04.570Z,1516692844.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:04.977Z,1516692844.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:34:04.978Z,1516692844.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:05.363Z,1516692845.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:34:05.364Z,1516692845.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:05.769Z,1516692845.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:34:05.771Z,1516692845.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:06.180Z,1516692846.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:34:06.181Z,1516692846.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:06.569Z,1516692846.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:34:06.570Z,1516692846.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:06.963Z,1516692846.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:34:06.964Z,1516692846.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:07.413Z,1516692847.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:34:07.414Z,1516692847.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:07.776Z,1516692847.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:34:07.777Z,1516692847.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:08.173Z,1516692848.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:34:08.174Z,1516692848.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:08.570Z,1516692848.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:34:08.572Z,1516692848.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:08.964Z,1516692848.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:34:08.965Z,1516692848.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:09.370Z,1516692849.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:34:09.371Z,1516692849.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:09.770Z,1516692849.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:10.170Z,1516692850.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:10.570Z,1516692850.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:10.970Z,1516692850.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:11.373Z,1516692851.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:11.776Z,1516692851.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:12.189Z,1516692852.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:12.581Z,1516692852.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:12.962Z,1516692852.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:13.365Z,1516692853.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:13.771Z,1516692853.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:14.176Z,1516692854.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:14.573Z,1516692854.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:14.963Z,1516692854.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:15.371Z,1516692855.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:15.776Z,1516692855.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:16.183Z,1516692856.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:16.575Z,1516692856.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:16.969Z,1516692856.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:17.377Z,1516692857.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:17.390Z,1516692857.390 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:34:17.780Z,1516692857.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:18.176Z,1516692858.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:18.581Z,1516692858.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:18.973Z,1516692858.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:19.378Z,1516692859.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:19.774Z,1516692859.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:20.188Z,1516692860.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:20.581Z,1516692860.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:20.953Z,1516692860.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:21.358Z,1516692861.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:21.757Z,1516692861.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:22.183Z,1516692862.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:22.593Z,1516692862.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:22.986Z,1516692862.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:23.389Z,1516692863.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:23.769Z,1516692863.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:24.162Z,1516692864.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:24.567Z,1516692864.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:24.971Z,1516692864.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:25.373Z,1516692865.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:25.769Z,1516692865.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:26.165Z,1516692866.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:26.561Z,1516692866.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:26.965Z,1516692866.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:27.368Z,1516692867.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:27.761Z,1516692867.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:30.865Z,1516692870.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:31.005Z,1516692871.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:31.353Z,1516692871.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:31.748Z,1516692871.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:32.132Z,1516692872.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:32.533Z,1516692872.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:32.965Z,1516692872.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:33.364Z,1516692873.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:33.738Z,1516692873.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:34.131Z,1516692874.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:34.532Z,1516692874.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:34.930Z,1516692874.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:35.331Z,1516692875.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:35.732Z,1516692875.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:36.162Z,1516692876.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:36.545Z,1516692876.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:36.934Z,1516692876.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:37.331Z,1516692877.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:37.731Z,1516692877.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:38.137Z,1516692878.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:38.533Z,1516692878.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:38.945Z,1516692878.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:39.349Z,1516692879.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:39.749Z,1516692879.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:40.140Z,1516692880.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:40.541Z,1516692880.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:40.933Z,1516692880.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:41.337Z,1516692881.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:41.741Z,1516692881.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:42.141Z,1516692882.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:42.546Z,1516692882.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:42.941Z,1516692882.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:43.333Z,1516692883.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:43.734Z,1516692883.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:44.133Z,1516692884.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:44.533Z,1516692884.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:44.945Z,1516692884.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:45.346Z,1516692885.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:45.746Z,1516692885.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:46.139Z,1516692886.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:46.548Z,1516692886.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:46.945Z,1516692886.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:47.357Z,1516692887.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:47.732Z,1516692887.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:48.138Z,1516692888.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:48.565Z,1516692888.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:48.963Z,1516692888.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:49.341Z,1516692889.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:49.741Z,1516692889.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:50.133Z,1516692890.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:50.531Z,1516692890.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:50.938Z,1516692890.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:51.338Z,1516692891.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:51.750Z,1516692891.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:52.138Z,1516692892.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:52.532Z,1516692892.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:52.936Z,1516692892.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:53.341Z,1516692893.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:53.734Z,1516692893.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:54.143Z,1516692894.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:54.548Z,1516692894.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:54.951Z,1516692894.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:55.334Z,1516692895.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:55.746Z,1516692895.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:56.141Z,1516692896.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:56.542Z,1516692896.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:56.946Z,1516692896.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:57.355Z,1516692897.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:57.745Z,1516692897.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:58.140Z,1516692898.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:58.529Z,1516692898.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:58.957Z,1516692898.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:59.328Z,1516692899.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:34:59.733Z,1516692899.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:00.165Z,1516692900.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:00.538Z,1516692900.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:00.936Z,1516692900.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:01.337Z,1516692901.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:01.736Z,1516692901.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:02.140Z,1516692902.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:02.531Z,1516692902.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:02.938Z,1516692902.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:03.368Z,1516692903.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:03.741Z,1516692903.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:04.135Z,1516692904.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:04.536Z,1516692904.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:04.936Z,1516692904.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:05.332Z,1516692905.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:05.731Z,1516692905.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:06.138Z,1516692906.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:06.550Z,1516692906.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:06.942Z,1516692906.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:07.331Z,1516692907.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:07.734Z,1516692907.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:08.137Z,1516692908.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:08.536Z,1516692908.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:08.937Z,1516692908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:09.342Z,1516692909.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:09.738Z,1516692909.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:10.136Z,1516692910.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:10.531Z,1516692910.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:10.934Z,1516692910.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:11.334Z,1516692911.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:11.736Z,1516692911.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:12.141Z,1516692912.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:12.540Z,1516692912.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:12.942Z,1516692912.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:13.336Z,1516692913.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:13.735Z,1516692913.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:14.136Z,1516692914.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:14.541Z,1516692914.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:14.950Z,1516692914.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:15.342Z,1516692915.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:15.745Z,1516692915.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:16.135Z,1516692916.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:16.533Z,1516692916.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:16.936Z,1516692916.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:17.335Z,1516692917.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:17.734Z,1516692917.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:18.150Z,1516692918.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:18.545Z,1516692918.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:18.949Z,1516692918.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:19.338Z,1516692919.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:19.738Z,1516692919.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:20.145Z,1516692920.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:20.537Z,1516692920.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:20.949Z,1516692920.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:21.342Z,1516692921.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:21.745Z,1516692921.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:22.136Z,1516692922.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:22.545Z,1516692922.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:22.933Z,1516692922.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:23.334Z,1516692923.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:23.737Z,1516692923.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:24.153Z,1516692924.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:24.546Z,1516692924.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:24.949Z,1516692924.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:25.344Z,1516692925.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:25.738Z,1516692925.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:26.138Z,1516692926.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:26.543Z,1516692926.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:26.946Z,1516692926.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:26.949Z,1516692926.949 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:35:26.949Z,1516692926.949 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:35:26.949Z,1516692926.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:35:26.949Z,1516692926.949 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:35:27.348Z,1516692927.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:27.351Z,1516692927.351 [Default:CheckIn:D] Stopped 2018-01-23T07:35:27.351Z,1516692927.351 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:35:27.753Z,1516692927.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 257.588184 min 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn:E] Stopped 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn] Stopped 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn](INFO): Running loop #26 2018-01-23T07:35:27.757Z,1516692927.757 [Default:CheckIn] Running Loop=26 2018-01-23T07:35:27.758Z,1516692927.758 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:35:27.758Z,1516692927.758 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:35:28.145Z,1516692928.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:31.241Z,1516692931.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:31.385Z,1516692931.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:31.738Z,1516692931.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:32.140Z,1516692932.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:32.511Z,1516692932.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:32.914Z,1516692932.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:33.313Z,1516692933.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:33.713Z,1516692933.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:34.122Z,1516692934.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:34.523Z,1516692934.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:34.953Z,1516692934.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:35.324Z,1516692935.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:35.759Z,1516692935.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:36.127Z,1516692936.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:36.537Z,1516692936.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:36.925Z,1516692936.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:37.349Z,1516692937.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:37.729Z,1516692937.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:38.135Z,1516692938.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:38.521Z,1516692938.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:38.917Z,1516692938.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:39.326Z,1516692939.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:39.730Z,1516692939.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:40.121Z,1516692940.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:40.550Z,1516692940.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:40.928Z,1516692940.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:41.353Z,1516692941.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:41.791Z,1516692941.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:42.148Z,1516692942.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:42.549Z,1516692942.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:42.942Z,1516692942.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:43.324Z,1516692943.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:43.733Z,1516692943.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:44.156Z,1516692944.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:44.524Z,1516692944.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:44.976Z,1516692944.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:45.342Z,1516692945.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:45.732Z,1516692945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:46.180Z,1516692946.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:46.550Z,1516692946.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:46.933Z,1516692946.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:47.350Z,1516692947.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:47.732Z,1516692947.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:48.104Z,1516692948.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:48.507Z,1516692948.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:48.941Z,1516692948.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:49.331Z,1516692949.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:49.731Z,1516692949.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:50.111Z,1516692950.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:50.513Z,1516692950.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:50.938Z,1516692950.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:51.317Z,1516692951.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:51.710Z,1516692951.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:52.108Z,1516692952.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:52.512Z,1516692952.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:52.922Z,1516692952.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:53.318Z,1516692953.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:53.713Z,1516692953.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:54.109Z,1516692954.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:54.508Z,1516692954.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:54.913Z,1516692954.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:55.314Z,1516692955.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:55.713Z,1516692955.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:56.116Z,1516692956.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:56.506Z,1516692956.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:56.917Z,1516692956.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:57.325Z,1516692957.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:57.721Z,1516692957.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:58.112Z,1516692958.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:58.512Z,1516692958.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:58.909Z,1516692958.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:59.317Z,1516692959.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:35:59.724Z,1516692959.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:00.121Z,1516692960.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:00.509Z,1516692960.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:00.912Z,1516692960.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:01.310Z,1516692961.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:01.712Z,1516692961.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:02.119Z,1516692962.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:02.525Z,1516692962.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:02.917Z,1516692962.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:03.312Z,1516692963.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:03.711Z,1516692963.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:04.130Z,1516692964.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:04.508Z,1516692964.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:04.917Z,1516692964.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:05.323Z,1516692965.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:05.723Z,1516692965.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:06.159Z,1516692966.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:06.509Z,1516692966.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:06.919Z,1516692966.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:07.321Z,1516692967.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:07.716Z,1516692967.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:08.121Z,1516692968.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:08.526Z,1516692968.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:08.922Z,1516692968.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:09.317Z,1516692969.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:09.719Z,1516692969.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:10.121Z,1516692970.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:10.522Z,1516692970.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:10.897Z,1516692970.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:11.327Z,1516692971.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:11.729Z,1516692971.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:12.128Z,1516692972.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:12.524Z,1516692972.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:12.931Z,1516692972.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:13.321Z,1516692973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:13.705Z,1516692973.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:14.131Z,1516692974.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:14.533Z,1516692974.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:14.929Z,1516692974.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:15.304Z,1516692975.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:15.709Z,1516692975.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:16.117Z,1516692976.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:16.509Z,1516692976.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:16.906Z,1516692976.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:17.311Z,1516692977.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:17.714Z,1516692977.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:18.110Z,1516692978.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:18.506Z,1516692978.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:18.912Z,1516692978.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:19.309Z,1516692979.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:19.717Z,1516692979.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:20.117Z,1516692980.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:20.521Z,1516692980.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:20.921Z,1516692980.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:21.312Z,1516692981.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:21.707Z,1516692981.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:22.117Z,1516692982.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:22.512Z,1516692982.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:22.906Z,1516692982.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:23.325Z,1516692983.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:23.721Z,1516692983.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:24.117Z,1516692984.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:24.510Z,1516692984.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:24.917Z,1516692984.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:25.310Z,1516692985.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:25.709Z,1516692985.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:26.118Z,1516692986.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:26.525Z,1516692986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:26.917Z,1516692986.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:27.321Z,1516692987.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:27.717Z,1516692987.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:28.116Z,1516692988.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:28.520Z,1516692988.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:31.605Z,1516692991.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:31.761Z,1516692991.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:32.111Z,1516692992.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:32.488Z,1516692992.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:32.881Z,1516692992.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:33.276Z,1516692993.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:33.685Z,1516692993.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:34.085Z,1516692994.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:34.482Z,1516692994.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:34.889Z,1516692994.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:35.281Z,1516692995.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:35.675Z,1516692995.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:36.076Z,1516692996.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:36.476Z,1516692996.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:36.870Z,1516692996.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:37.281Z,1516692997.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:37.685Z,1516692997.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:38.085Z,1516692998.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:38.472Z,1516692998.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:38.871Z,1516692998.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:39.274Z,1516692999.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:39.680Z,1516692999.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:40.085Z,1516693000.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:40.493Z,1516693000.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:40.882Z,1516693000.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:41.273Z,1516693001.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:41.678Z,1516693001.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:42.072Z,1516693002.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:42.485Z,1516693002.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:42.875Z,1516693002.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:43.292Z,1516693003.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:43.685Z,1516693003.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:44.081Z,1516693004.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:44.474Z,1516693004.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:44.874Z,1516693004.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:45.285Z,1516693005.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:45.684Z,1516693005.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:46.087Z,1516693006.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:46.493Z,1516693006.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:46.889Z,1516693006.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:47.274Z,1516693007.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:47.682Z,1516693007.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:48.076Z,1516693008.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:48.490Z,1516693008.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:48.881Z,1516693008.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:49.289Z,1516693009.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:49.693Z,1516693009.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.083Z,1516693010.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.492Z,1516693010.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.885Z,1516693010.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.885Z,1516693010.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-01-23T07:36:50.885Z,1516693010.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:36:50.891Z,1516693010.891 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.891Z,1516693010.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-01-23T07:36:50.891Z,1516693010.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:36:50.896Z,1516693010.896 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:50.896Z,1516693010.896 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87 2018-01-23T07:36:50.896Z,1516693010.896 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:36:50.916Z,1516693010.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:36:50.916Z,1516693010.916 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:36:50.917Z,1516693010.917 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:36:51.304Z,1516693011.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:36:51.304Z,1516693011.304 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-01-23T07:36:51.305Z,1516693011.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:36:51.305Z,1516693011.305 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-01-23T07:36:51.305Z,1516693011.305 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:36:51.305Z,1516693011.305 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87 2018-01-23T07:36:51.672Z,1516693011.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:36:51.673Z,1516693011.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:36:51.673Z,1516693011.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:36:51.673Z,1516693011.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:36:51.674Z,1516693011.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:36:51.674Z,1516693011.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:36:51.704Z,1516693011.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:36:51.704Z,1516693011.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:36:51.704Z,1516693011.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:36:52.081Z,1516693012.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:36:52.082Z,1516693012.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:52.486Z,1516693012.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:36:52.508Z,1516693012.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:52.876Z,1516693012.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:36:52.877Z,1516693012.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:53.268Z,1516693013.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:36:53.269Z,1516693013.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:53.670Z,1516693013.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:36:53.671Z,1516693013.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:54.071Z,1516693014.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:36:54.072Z,1516693014.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:54.470Z,1516693014.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:36:54.471Z,1516693014.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:54.871Z,1516693014.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:36:54.872Z,1516693014.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:55.280Z,1516693015.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:36:55.281Z,1516693015.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:55.684Z,1516693015.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:36:55.685Z,1516693015.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:56.078Z,1516693016.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:36:56.079Z,1516693016.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:56.476Z,1516693016.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:36:56.477Z,1516693016.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:56.869Z,1516693016.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:36:56.870Z,1516693016.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:57.279Z,1516693017.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:36:57.280Z,1516693017.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:57.671Z,1516693017.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:36:57.672Z,1516693017.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:58.082Z,1516693018.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:36:58.083Z,1516693018.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:58.484Z,1516693018.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:36:58.485Z,1516693018.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:58.881Z,1516693018.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:36:58.881Z,1516693018.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:59.270Z,1516693019.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:36:59.271Z,1516693019.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:36:59.674Z,1516693019.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:36:59.679Z,1516693019.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:00.071Z,1516693020.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:37:00.072Z,1516693020.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:00.473Z,1516693020.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:37:00.474Z,1516693020.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:00.873Z,1516693020.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:37:00.874Z,1516693020.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:01.292Z,1516693021.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:37:01.293Z,1516693021.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:01.690Z,1516693021.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:37:01.691Z,1516693021.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:02.088Z,1516693022.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:37:02.089Z,1516693022.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:02.475Z,1516693022.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:37:02.476Z,1516693022.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:02.875Z,1516693022.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:37:02.876Z,1516693022.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:03.281Z,1516693023.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:37:03.283Z,1516693023.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:03.671Z,1516693023.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:37:03.672Z,1516693023.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:04.081Z,1516693024.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:37:04.082Z,1516693024.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:04.488Z,1516693024.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:37:04.489Z,1516693024.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:04.892Z,1516693024.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:37:04.893Z,1516693024.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:05.273Z,1516693025.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:37:05.273Z,1516693025.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:05.675Z,1516693025.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:37:05.676Z,1516693025.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:06.082Z,1516693026.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:37:06.083Z,1516693026.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:06.479Z,1516693026.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:37:06.480Z,1516693026.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:06.878Z,1516693026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:37:06.880Z,1516693026.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:07.282Z,1516693027.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:37:07.283Z,1516693027.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:07.704Z,1516693027.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:37:07.705Z,1516693027.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:08.085Z,1516693028.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:37:08.086Z,1516693028.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:08.474Z,1516693028.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:37:08.475Z,1516693028.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:08.880Z,1516693028.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:37:08.881Z,1516693028.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:09.279Z,1516693029.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:37:09.280Z,1516693029.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:09.679Z,1516693029.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:37:09.680Z,1516693029.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:10.092Z,1516693030.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:37:10.092Z,1516693030.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:10.485Z,1516693030.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:37:10.486Z,1516693030.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:10.881Z,1516693030.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:37:10.881Z,1516693030.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:11.274Z,1516693031.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:11.679Z,1516693031.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:12.084Z,1516693032.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:12.489Z,1516693032.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:12.882Z,1516693032.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:13.280Z,1516693033.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:13.677Z,1516693033.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:14.083Z,1516693034.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:14.492Z,1516693034.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:14.892Z,1516693034.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:15.277Z,1516693035.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:15.680Z,1516693035.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:16.083Z,1516693036.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:16.487Z,1516693036.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:16.888Z,1516693036.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:17.277Z,1516693037.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:17.677Z,1516693037.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:18.081Z,1516693038.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:18.486Z,1516693038.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:18.882Z,1516693038.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:19.280Z,1516693039.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:19.677Z,1516693039.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:20.089Z,1516693040.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:20.486Z,1516693040.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:20.886Z,1516693040.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:21.284Z,1516693041.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:21.685Z,1516693041.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:22.085Z,1516693042.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:22.488Z,1516693042.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:22.884Z,1516693042.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:23.283Z,1516693043.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:23.680Z,1516693043.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:24.084Z,1516693044.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:24.487Z,1516693044.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:24.897Z,1516693044.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:25.281Z,1516693045.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:25.669Z,1516693045.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:26.085Z,1516693046.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:26.488Z,1516693046.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:26.894Z,1516693046.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:27.285Z,1516693047.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:27.664Z,1516693047.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:28.102Z,1516693048.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:28.501Z,1516693048.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:28.897Z,1516693048.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:31.967Z,1516693051.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:32.120Z,1516693052.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:32.469Z,1516693052.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:32.864Z,1516693052.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:33.261Z,1516693053.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:33.665Z,1516693053.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:34.054Z,1516693054.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:34.459Z,1516693054.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:34.858Z,1516693054.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:35.262Z,1516693055.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:35.666Z,1516693055.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:36.062Z,1516693056.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:36.454Z,1516693056.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:36.860Z,1516693056.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:37.265Z,1516693057.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:37.660Z,1516693057.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:38.053Z,1516693058.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:38.412Z,1516693058.412 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T07:37:38.412Z,1516693058.412 [NAL9602] Data Fault, FailCount= 4 2018-01-23T07:37:38.412Z,1516693058.412 [NAL9602](ERROR): Data Fault 2018-01-23T07:37:38.460Z,1516693058.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:38.486Z,1516693058.486 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T07:37:38.812Z,1516693058.812 [NAL9602](INFO): Powering down 2018-01-23T07:37:38.860Z,1516693058.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:39.243Z,1516693059.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:39.670Z,1516693059.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:39.700Z,1516693059.700 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T07:37:39.700Z,1516693059.700 [NAL9602] No Fault, FailCount= 4 2018-01-23T07:37:40.046Z,1516693060.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:40.447Z,1516693060.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:40.853Z,1516693060.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:41.245Z,1516693061.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:41.647Z,1516693061.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:42.053Z,1516693062.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:42.449Z,1516693062.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:42.848Z,1516693062.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:43.256Z,1516693063.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:43.649Z,1516693063.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:44.048Z,1516693064.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:44.454Z,1516693064.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:44.853Z,1516693064.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:45.248Z,1516693065.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:45.670Z,1516693065.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:46.054Z,1516693066.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:46.453Z,1516693066.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:46.854Z,1516693066.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:47.250Z,1516693067.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:47.650Z,1516693067.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:48.052Z,1516693068.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:48.450Z,1516693068.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:48.854Z,1516693068.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:49.250Z,1516693069.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:49.650Z,1516693069.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:50.048Z,1516693070.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:50.461Z,1516693070.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:50.850Z,1516693070.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:51.248Z,1516693071.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:51.662Z,1516693071.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:52.050Z,1516693072.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:52.450Z,1516693072.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:52.852Z,1516693072.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:53.250Z,1516693073.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:53.648Z,1516693073.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:54.050Z,1516693074.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:54.450Z,1516693074.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:54.848Z,1516693074.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:55.261Z,1516693075.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:55.651Z,1516693075.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:56.048Z,1516693076.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:56.465Z,1516693076.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:56.855Z,1516693076.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:57.249Z,1516693077.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:57.665Z,1516693077.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:58.053Z,1516693078.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:58.454Z,1516693078.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:58.854Z,1516693078.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:59.256Z,1516693079.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:37:59.651Z,1516693079.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:00.062Z,1516693080.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:00.452Z,1516693080.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:00.859Z,1516693080.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:01.253Z,1516693081.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:01.671Z,1516693081.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:02.053Z,1516693082.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:02.461Z,1516693082.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:02.865Z,1516693082.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:03.249Z,1516693083.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:03.656Z,1516693083.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:04.073Z,1516693084.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:04.463Z,1516693084.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:04.844Z,1516693084.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:05.276Z,1516693085.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:05.666Z,1516693085.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:06.049Z,1516693086.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:06.455Z,1516693086.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:06.846Z,1516693086.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:07.256Z,1516693087.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:07.653Z,1516693087.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:08.048Z,1516693088.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:08.449Z,1516693088.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:08.816Z,1516693088.816 [NAL9602](INFO): Powering up NAL9602 2018-01-23T07:38:08.857Z,1516693088.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:09.248Z,1516693089.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:09.652Z,1516693089.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:10.049Z,1516693090.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:10.450Z,1516693090.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:10.849Z,1516693090.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:11.249Z,1516693091.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:11.671Z,1516693091.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:12.050Z,1516693092.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:12.449Z,1516693092.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:12.848Z,1516693092.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:13.251Z,1516693093.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:13.652Z,1516693093.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:14.048Z,1516693094.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:14.456Z,1516693094.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:14.849Z,1516693094.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:15.248Z,1516693095.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:15.650Z,1516693095.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:16.051Z,1516693096.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:16.452Z,1516693096.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:16.856Z,1516693096.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:17.249Z,1516693097.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:17.686Z,1516693097.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:18.049Z,1516693098.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:18.451Z,1516693098.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:18.849Z,1516693098.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:19.250Z,1516693099.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:19.666Z,1516693099.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:20.021Z,1516693100.021 [NAL9602](INFO): NAL9602 initialized 2018-01-23T07:38:20.052Z,1516693100.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:20.451Z,1516693100.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:20.854Z,1516693100.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:21.254Z,1516693101.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:21.666Z,1516693101.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:22.055Z,1516693102.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:22.455Z,1516693102.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:22.853Z,1516693102.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:23.257Z,1516693103.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:23.657Z,1516693103.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:24.058Z,1516693104.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:24.457Z,1516693104.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:24.853Z,1516693104.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:25.261Z,1516693105.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:25.656Z,1516693105.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:26.050Z,1516693106.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:26.454Z,1516693106.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:26.861Z,1516693106.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:27.262Z,1516693107.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:27.669Z,1516693107.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:28.060Z,1516693108.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:28.453Z,1516693108.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:28.860Z,1516693108.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:29.264Z,1516693109.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:32.365Z,1516693112.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:32.495Z,1516693112.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:32.867Z,1516693112.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:33.264Z,1516693113.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:33.680Z,1516693113.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:34.056Z,1516693114.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:34.456Z,1516693114.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:34.863Z,1516693114.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:35.270Z,1516693115.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:35.667Z,1516693115.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:36.059Z,1516693116.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:36.467Z,1516693116.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:36.861Z,1516693116.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:37.261Z,1516693117.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:37.669Z,1516693117.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:38.067Z,1516693118.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:38.469Z,1516693118.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:38.858Z,1516693118.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:39.267Z,1516693119.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:39.660Z,1516693119.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:40.069Z,1516693120.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:40.461Z,1516693120.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:40.867Z,1516693120.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:41.273Z,1516693121.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:41.672Z,1516693121.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:42.058Z,1516693122.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:42.462Z,1516693122.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:42.846Z,1516693122.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:43.249Z,1516693123.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:43.677Z,1516693123.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:44.077Z,1516693124.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:44.474Z,1516693124.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:44.851Z,1516693124.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:45.252Z,1516693125.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:45.655Z,1516693125.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:46.061Z,1516693126.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:46.457Z,1516693126.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:46.883Z,1516693126.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:47.285Z,1516693127.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:47.661Z,1516693127.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:48.062Z,1516693128.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:48.453Z,1516693128.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:48.869Z,1516693128.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:49.251Z,1516693129.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:49.661Z,1516693129.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:50.064Z,1516693130.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:50.461Z,1516693130.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:50.854Z,1516693130.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:51.265Z,1516693131.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:51.654Z,1516693131.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:52.065Z,1516693132.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:52.458Z,1516693132.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:52.859Z,1516693132.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:53.258Z,1516693133.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:53.682Z,1516693133.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:54.046Z,1516693134.046 [PNI_TCM](ERROR): CRC does not match. Expected:0x9332 got:0x43468 2018-01-23T07:38:54.085Z,1516693134.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:54.450Z,1516693134.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x47475 got:0x102 2018-01-23T07:38:54.491Z,1516693134.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:54.854Z,1516693134.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:55.265Z,1516693135.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:55.663Z,1516693135.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:56.063Z,1516693136.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:56.469Z,1516693136.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:56.869Z,1516693136.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:57.257Z,1516693137.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:57.656Z,1516693137.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:58.063Z,1516693138.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:58.467Z,1516693138.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:58.873Z,1516693138.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:59.273Z,1516693139.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:38:59.663Z,1516693139.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:00.053Z,1516693140.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:00.464Z,1516693140.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:00.865Z,1516693140.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:01.260Z,1516693141.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:01.681Z,1516693141.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:02.073Z,1516693142.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:02.469Z,1516693142.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:02.861Z,1516693142.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:03.274Z,1516693143.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:03.659Z,1516693143.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:04.062Z,1516693144.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:04.462Z,1516693144.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:04.862Z,1516693144.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:05.270Z,1516693145.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:05.677Z,1516693145.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:06.065Z,1516693146.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:06.459Z,1516693146.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:06.868Z,1516693146.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:07.264Z,1516693147.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:07.669Z,1516693147.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:08.084Z,1516693148.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:08.470Z,1516693148.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:08.867Z,1516693148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:09.269Z,1516693149.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:09.660Z,1516693149.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:10.044Z,1516693150.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:10.452Z,1516693150.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:10.870Z,1516693150.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:11.280Z,1516693151.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:11.680Z,1516693151.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:12.049Z,1516693152.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:12.459Z,1516693152.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:12.864Z,1516693152.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:13.250Z,1516693153.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:13.668Z,1516693153.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:14.066Z,1516693154.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:14.490Z,1516693154.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:14.850Z,1516693154.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:15.259Z,1516693155.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:15.663Z,1516693155.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:16.053Z,1516693156.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:16.460Z,1516693156.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:16.864Z,1516693156.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:17.270Z,1516693157.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:17.675Z,1516693157.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:18.054Z,1516693158.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:18.460Z,1516693158.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:18.865Z,1516693158.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:19.254Z,1516693159.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:19.670Z,1516693159.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:20.079Z,1516693160.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:20.472Z,1516693160.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:20.858Z,1516693160.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:21.263Z,1516693161.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:21.661Z,1516693161.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:22.056Z,1516693162.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:22.456Z,1516693162.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:22.874Z,1516693162.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:23.269Z,1516693163.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:23.676Z,1516693163.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:24.061Z,1516693164.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:24.456Z,1516693164.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:24.861Z,1516693164.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:25.261Z,1516693165.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:25.670Z,1516693165.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:26.073Z,1516693166.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:26.473Z,1516693166.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:26.862Z,1516693166.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:27.244Z,1516693167.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:27.650Z,1516693167.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:28.053Z,1516693168.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:28.454Z,1516693168.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:28.858Z,1516693168.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:29.286Z,1516693169.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:29.661Z,1516693169.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:32.753Z,1516693172.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:32.900Z,1516693172.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:33.249Z,1516693173.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:33.647Z,1516693173.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:34.042Z,1516693174.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:34.425Z,1516693174.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:34.820Z,1516693174.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:35.225Z,1516693175.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:35.622Z,1516693175.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:36.025Z,1516693176.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:36.430Z,1516693176.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:36.821Z,1516693176.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:37.219Z,1516693177.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:37.629Z,1516693177.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:38.026Z,1516693178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:38.425Z,1516693178.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:38.821Z,1516693178.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:39.225Z,1516693179.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:39.625Z,1516693179.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:40.029Z,1516693180.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:40.429Z,1516693180.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:40.823Z,1516693180.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:41.218Z,1516693181.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:41.629Z,1516693181.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:42.025Z,1516693182.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:42.429Z,1516693182.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:42.821Z,1516693182.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:43.224Z,1516693183.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:43.629Z,1516693183.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:44.029Z,1516693184.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:44.432Z,1516693184.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:44.821Z,1516693184.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:45.218Z,1516693185.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:45.625Z,1516693185.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:46.029Z,1516693186.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:46.426Z,1516693186.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:46.823Z,1516693186.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:47.218Z,1516693187.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:47.629Z,1516693187.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:48.041Z,1516693188.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:48.437Z,1516693188.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:48.822Z,1516693188.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:49.222Z,1516693189.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:49.629Z,1516693189.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:50.037Z,1516693190.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:50.433Z,1516693190.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:50.824Z,1516693190.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:51.221Z,1516693191.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:51.637Z,1516693191.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:52.031Z,1516693192.031 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:52.031Z,1516693192.031 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-01-23T07:39:52.031Z,1516693192.031 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:39:52.033Z,1516693192.033 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:52.033Z,1516693192.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-01-23T07:39:52.033Z,1516693192.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:39:52.035Z,1516693192.035 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:52.035Z,1516693192.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88 2018-01-23T07:39:52.035Z,1516693192.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:39:52.047Z,1516693192.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:39:52.047Z,1516693192.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:39:52.047Z,1516693192.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:39:52.461Z,1516693192.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:39:52.461Z,1516693192.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-01-23T07:39:52.461Z,1516693192.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:39:52.461Z,1516693192.461 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-01-23T07:39:52.462Z,1516693192.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:39:52.462Z,1516693192.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88 2018-01-23T07:39:52.827Z,1516693192.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:39:52.828Z,1516693192.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:39:52.828Z,1516693192.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:39:52.828Z,1516693192.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:39:52.829Z,1516693192.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:39:52.829Z,1516693192.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:39:52.830Z,1516693192.830 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:39:52.830Z,1516693192.830 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:39:52.830Z,1516693192.830 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:39:53.230Z,1516693193.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:39:53.232Z,1516693193.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:53.641Z,1516693193.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:39:53.642Z,1516693193.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:54.048Z,1516693194.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:39:54.049Z,1516693194.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:54.437Z,1516693194.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:39:54.437Z,1516693194.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:54.824Z,1516693194.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:39:54.825Z,1516693194.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:55.232Z,1516693195.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:39:55.233Z,1516693195.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:55.647Z,1516693195.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:39:55.648Z,1516693195.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:56.044Z,1516693196.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:39:56.045Z,1516693196.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:56.472Z,1516693196.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:39:56.473Z,1516693196.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:56.822Z,1516693196.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:39:56.827Z,1516693196.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:57.224Z,1516693197.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:39:57.225Z,1516693197.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:57.622Z,1516693197.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:39:57.623Z,1516693197.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:58.025Z,1516693198.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:39:58.026Z,1516693198.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:58.429Z,1516693198.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:39:58.430Z,1516693198.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:58.826Z,1516693198.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:39:58.828Z,1516693198.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:59.223Z,1516693199.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:39:59.224Z,1516693199.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:39:59.624Z,1516693199.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:39:59.625Z,1516693199.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:00.026Z,1516693200.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:40:00.031Z,1516693200.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:00.423Z,1516693200.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:40:00.424Z,1516693200.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:00.836Z,1516693200.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:40:00.837Z,1516693200.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:01.230Z,1516693201.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:40:01.231Z,1516693201.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:01.629Z,1516693201.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:40:01.630Z,1516693201.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:02.022Z,1516693202.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:40:02.023Z,1516693202.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:02.420Z,1516693202.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:40:02.421Z,1516693202.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:02.821Z,1516693202.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:40:02.822Z,1516693202.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:03.223Z,1516693203.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:40:03.224Z,1516693203.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:03.620Z,1516693203.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:40:03.621Z,1516693203.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:04.029Z,1516693204.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:40:04.030Z,1516693204.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:04.436Z,1516693204.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:40:04.437Z,1516693204.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:04.834Z,1516693204.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:40:04.835Z,1516693204.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:05.220Z,1516693205.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:40:05.221Z,1516693205.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:05.630Z,1516693205.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:40:05.631Z,1516693205.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:06.020Z,1516693206.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:40:06.021Z,1516693206.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:06.432Z,1516693206.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:40:06.433Z,1516693206.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:06.829Z,1516693206.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:40:06.830Z,1516693206.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:07.236Z,1516693207.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:40:07.237Z,1516693207.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:07.629Z,1516693207.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:40:07.630Z,1516693207.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:08.021Z,1516693208.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:40:08.022Z,1516693208.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:08.429Z,1516693208.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:40:08.430Z,1516693208.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:08.833Z,1516693208.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:40:08.833Z,1516693208.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:09.225Z,1516693209.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:40:09.226Z,1516693209.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:09.630Z,1516693209.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:40:09.631Z,1516693209.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:10.030Z,1516693210.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:40:10.031Z,1516693210.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:10.438Z,1516693210.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:40:10.443Z,1516693210.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:10.833Z,1516693210.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:40:10.834Z,1516693210.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:11.228Z,1516693211.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:40:11.229Z,1516693211.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:11.628Z,1516693211.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:40:11.629Z,1516693211.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:12.032Z,1516693212.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:12.431Z,1516693212.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:12.837Z,1516693212.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:13.235Z,1516693213.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:13.640Z,1516693213.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:14.031Z,1516693214.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:14.432Z,1516693214.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:14.831Z,1516693214.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:15.224Z,1516693215.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:15.611Z,1516693215.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:16.038Z,1516693216.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:16.449Z,1516693216.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:16.847Z,1516693216.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:17.241Z,1516693217.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:17.625Z,1516693217.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:18.019Z,1516693218.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:18.424Z,1516693218.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:18.850Z,1516693218.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:19.225Z,1516693219.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:19.622Z,1516693219.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:20.020Z,1516693220.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:20.424Z,1516693220.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:20.829Z,1516693220.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:21.229Z,1516693221.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:21.623Z,1516693221.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:22.026Z,1516693222.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:22.426Z,1516693222.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:22.825Z,1516693222.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:23.219Z,1516693223.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:23.621Z,1516693223.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:24.020Z,1516693224.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:24.419Z,1516693224.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:24.826Z,1516693224.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:25.224Z,1516693225.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:25.638Z,1516693225.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:26.023Z,1516693226.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:26.429Z,1516693226.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:26.829Z,1516693226.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:27.224Z,1516693227.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:27.625Z,1516693227.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:28.033Z,1516693228.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:28.036Z,1516693228.036 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:35:27.8Z 2018-01-23T07:40:28.036Z,1516693228.036 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T07:40:28.036Z,1516693228.036 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T07:40:28.437Z,1516693228.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:28.949Z,1516693228.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:29.225Z,1516693229.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:32.322Z,1516693232.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:32.406Z,1516693232.406 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0104.lzma 2018-01-23T07:40:32.476Z,1516693232.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:32.798Z,1516693232.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:33.145Z,1516693233.145 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0104.lzma.bak 2018-01-23T07:40:33.145Z,1516693233.145 [DataOverHttps](INFO): SBD MOMSN=7755221 2018-01-23T07:40:33.234Z,1516693233.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:34.436Z,1516693234.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:34.585Z,1516693234.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:37.609Z,1516693237.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:37.764Z,1516693237.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:38.129Z,1516693238.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:38.529Z,1516693238.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:38.929Z,1516693238.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:39.325Z,1516693239.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:42.408Z,1516693242.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:42.493Z,1516693242.493 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0105.lzma 2018-01-23T07:40:42.560Z,1516693242.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:42.880Z,1516693242.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:43.233Z,1516693243.233 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0105.lzma.bak 2018-01-23T07:40:43.233Z,1516693243.233 [DataOverHttps](INFO): SBD MOMSN=7755223 2018-01-23T07:40:43.312Z,1516693243.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:43.933Z,1516693243.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:43.936Z,1516693243.936 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T07:40:43.936Z,1516693243.936 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T07:40:43.936Z,1516693243.936 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T07:40:44.108Z,1516693244.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:47.174Z,1516693247.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:47.313Z,1516693247.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:47.665Z,1516693247.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:48.077Z,1516693248.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:48.460Z,1516693248.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:48.863Z,1516693248.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:49.268Z,1516693249.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:49.633Z,1516693249.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:50.065Z,1516693250.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:50.468Z,1516693250.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:50.862Z,1516693250.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:51.241Z,1516693251.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:51.640Z,1516693251.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:52.041Z,1516693252.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:52.440Z,1516693252.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:52.845Z,1516693252.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:53.242Z,1516693253.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:53.660Z,1516693253.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:54.056Z,1516693254.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:54.440Z,1516693254.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:54.840Z,1516693254.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:55.236Z,1516693255.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:55.637Z,1516693255.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:56.063Z,1516693256.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:56.462Z,1516693256.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:56.842Z,1516693256.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:57.240Z,1516693257.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:57.650Z,1516693257.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:58.041Z,1516693258.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:58.438Z,1516693258.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:58.845Z,1516693258.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:59.242Z,1516693259.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:40:59.669Z,1516693259.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:00.038Z,1516693260.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:00.439Z,1516693260.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:00.839Z,1516693260.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:01.246Z,1516693261.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:01.645Z,1516693261.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:02.054Z,1516693262.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:02.449Z,1516693262.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:02.852Z,1516693262.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:03.242Z,1516693263.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:03.645Z,1516693263.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:04.044Z,1516693264.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:04.445Z,1516693264.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:04.854Z,1516693264.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:05.250Z,1516693265.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:05.657Z,1516693265.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:06.043Z,1516693266.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:06.445Z,1516693266.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:06.849Z,1516693266.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:07.243Z,1516693267.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:07.641Z,1516693267.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:08.050Z,1516693268.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:08.454Z,1516693268.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:08.850Z,1516693268.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:09.249Z,1516693269.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:09.649Z,1516693269.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:10.032Z,1516693270.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:10.461Z,1516693270.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:10.869Z,1516693270.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:11.246Z,1516693271.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:11.650Z,1516693271.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:12.039Z,1516693272.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:12.448Z,1516693272.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:12.841Z,1516693272.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:13.240Z,1516693273.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:13.638Z,1516693273.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:14.042Z,1516693274.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:14.445Z,1516693274.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:14.842Z,1516693274.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:15.239Z,1516693275.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:15.640Z,1516693275.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:16.042Z,1516693276.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:16.451Z,1516693276.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:16.852Z,1516693276.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:17.323Z,1516693277.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:17.647Z,1516693277.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:18.041Z,1516693278.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:18.442Z,1516693278.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:18.849Z,1516693278.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:19.248Z,1516693279.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:19.641Z,1516693279.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:20.177Z,1516693280.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:20.446Z,1516693280.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:20.845Z,1516693280.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:21.241Z,1516693281.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:21.641Z,1516693281.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:22.043Z,1516693282.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:22.439Z,1516693282.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:22.853Z,1516693282.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:23.246Z,1516693283.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:23.650Z,1516693283.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:24.039Z,1516693284.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:24.439Z,1516693284.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:24.846Z,1516693284.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:25.242Z,1516693285.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:25.637Z,1516693285.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:26.057Z,1516693286.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:26.454Z,1516693286.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:26.851Z,1516693286.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:27.245Z,1516693287.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:27.655Z,1516693287.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:28.046Z,1516693288.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:28.447Z,1516693288.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:28.865Z,1516693288.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:29.251Z,1516693289.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:29.691Z,1516693289.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:30.048Z,1516693290.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:30.449Z,1516693290.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:30.845Z,1516693290.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:31.242Z,1516693291.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:31.637Z,1516693291.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:32.050Z,1516693292.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:32.454Z,1516693292.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:32.853Z,1516693292.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:33.247Z,1516693293.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:33.653Z,1516693293.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:34.045Z,1516693294.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:34.447Z,1516693294.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:34.855Z,1516693294.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:35.253Z,1516693295.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:35.653Z,1516693295.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:36.050Z,1516693296.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:36.449Z,1516693296.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:36.849Z,1516693296.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:37.252Z,1516693297.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:37.629Z,1516693297.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:38.057Z,1516693298.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:38.465Z,1516693298.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:38.860Z,1516693298.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:39.253Z,1516693299.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:39.636Z,1516693299.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:40.036Z,1516693300.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:40.461Z,1516693300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:40.866Z,1516693300.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:41.246Z,1516693301.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:41.670Z,1516693301.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:42.046Z,1516693302.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:42.436Z,1516693302.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:42.839Z,1516693302.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:43.251Z,1516693303.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:43.640Z,1516693303.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:44.054Z,1516693304.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:44.450Z,1516693304.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:47.549Z,1516693307.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:47.678Z,1516693307.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:48.049Z,1516693308.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:48.448Z,1516693308.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:48.848Z,1516693308.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:49.250Z,1516693309.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:49.651Z,1516693309.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:50.044Z,1516693310.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:50.444Z,1516693310.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:50.857Z,1516693310.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:51.249Z,1516693311.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:51.650Z,1516693311.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:52.046Z,1516693312.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:52.443Z,1516693312.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:52.857Z,1516693312.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:53.254Z,1516693313.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:53.649Z,1516693313.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:54.050Z,1516693314.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:54.447Z,1516693314.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:54.851Z,1516693314.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:55.251Z,1516693315.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:55.650Z,1516693315.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:56.047Z,1516693316.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:56.450Z,1516693316.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:56.851Z,1516693316.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:57.251Z,1516693317.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:57.652Z,1516693317.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:58.048Z,1516693318.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:58.444Z,1516693318.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:58.850Z,1516693318.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:59.257Z,1516693319.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:41:59.654Z,1516693319.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:00.044Z,1516693320.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:00.443Z,1516693320.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:00.853Z,1516693320.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:01.257Z,1516693321.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:01.657Z,1516693321.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:02.047Z,1516693322.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:02.443Z,1516693322.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:02.857Z,1516693322.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:03.252Z,1516693323.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:03.660Z,1516693323.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:04.048Z,1516693324.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:04.443Z,1516693324.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:04.854Z,1516693324.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:05.261Z,1516693325.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:05.665Z,1516693325.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:06.048Z,1516693326.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:06.447Z,1516693326.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:06.854Z,1516693326.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:07.264Z,1516693327.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:07.657Z,1516693327.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:08.043Z,1516693328.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:08.448Z,1516693328.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:08.865Z,1516693328.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:09.256Z,1516693329.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:09.664Z,1516693329.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:10.045Z,1516693330.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:10.447Z,1516693330.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:10.853Z,1516693330.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:11.261Z,1516693331.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:11.654Z,1516693331.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:12.044Z,1516693332.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:12.445Z,1516693332.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:12.853Z,1516693332.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:13.260Z,1516693333.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:13.665Z,1516693333.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:14.043Z,1516693334.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:14.443Z,1516693334.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:14.854Z,1516693334.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:15.258Z,1516693335.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:15.660Z,1516693335.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:16.046Z,1516693336.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:16.444Z,1516693336.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:16.854Z,1516693336.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:17.258Z,1516693337.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:17.654Z,1516693337.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:18.052Z,1516693338.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:18.453Z,1516693338.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:18.854Z,1516693338.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:19.256Z,1516693339.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:19.661Z,1516693339.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:20.048Z,1516693340.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:20.448Z,1516693340.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:20.846Z,1516693340.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:21.249Z,1516693341.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:21.677Z,1516693341.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:22.045Z,1516693342.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:22.442Z,1516693342.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:22.845Z,1516693342.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:23.274Z,1516693343.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:23.653Z,1516693343.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:24.044Z,1516693344.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:24.444Z,1516693344.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:24.846Z,1516693344.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:25.249Z,1516693345.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:25.678Z,1516693345.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:26.042Z,1516693346.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:26.443Z,1516693346.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:26.845Z,1516693346.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:27.246Z,1516693347.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:27.657Z,1516693347.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:28.058Z,1516693348.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:28.442Z,1516693348.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:28.842Z,1516693348.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:29.243Z,1516693349.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:29.642Z,1516693349.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:30.079Z,1516693350.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:30.458Z,1516693350.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:30.850Z,1516693350.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:31.252Z,1516693351.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:31.647Z,1516693351.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:32.045Z,1516693352.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:32.449Z,1516693352.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:32.853Z,1516693352.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:33.262Z,1516693353.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:33.660Z,1516693353.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:34.054Z,1516693354.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:34.446Z,1516693354.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:34.854Z,1516693354.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:35.251Z,1516693355.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:35.646Z,1516693355.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:36.057Z,1516693356.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:36.459Z,1516693356.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:36.853Z,1516693356.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:37.252Z,1516693357.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:37.645Z,1516693357.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:38.051Z,1516693358.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:38.445Z,1516693358.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:38.843Z,1516693358.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:39.253Z,1516693359.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:39.666Z,1516693359.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:40.058Z,1516693360.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:40.447Z,1516693360.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:40.843Z,1516693360.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:41.252Z,1516693361.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:41.651Z,1516693361.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:42.054Z,1516693362.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:42.461Z,1516693362.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:42.856Z,1516693362.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:43.255Z,1516693363.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:43.646Z,1516693363.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:44.044Z,1516693364.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:44.457Z,1516693364.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:47.545Z,1516693367.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:47.693Z,1516693367.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:48.035Z,1516693368.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:48.436Z,1516693368.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:48.809Z,1516693368.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:49.240Z,1516693369.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:49.618Z,1516693369.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:50.037Z,1516693370.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:50.437Z,1516693370.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:50.837Z,1516693370.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:51.233Z,1516693371.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:51.618Z,1516693371.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:52.022Z,1516693372.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:52.430Z,1516693372.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:52.822Z,1516693372.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:53.224Z,1516693373.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:53.224Z,1516693373.224 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-01-23T07:42:53.224Z,1516693373.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:42:53.226Z,1516693373.226 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:53.226Z,1516693373.226 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-01-23T07:42:53.226Z,1516693373.226 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:42:53.228Z,1516693373.228 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:53.228Z,1516693373.228 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89 2018-01-23T07:42:53.228Z,1516693373.228 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:42:53.270Z,1516693373.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:42:53.270Z,1516693373.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:42:53.270Z,1516693373.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:42:53.656Z,1516693373.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:42:53.656Z,1516693373.656 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-01-23T07:42:53.657Z,1516693373.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:42:53.657Z,1516693373.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-01-23T07:42:53.657Z,1516693373.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:42:53.657Z,1516693373.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89 2018-01-23T07:42:54.040Z,1516693374.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:42:54.040Z,1516693374.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:42:54.040Z,1516693374.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:42:54.041Z,1516693374.041 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:42:54.041Z,1516693374.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:42:54.041Z,1516693374.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:42:54.042Z,1516693374.042 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:42:54.042Z,1516693374.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:42:54.043Z,1516693374.043 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:42:54.424Z,1516693374.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:42:54.425Z,1516693374.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:54.820Z,1516693374.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:42:54.821Z,1516693374.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:55.223Z,1516693375.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:42:55.224Z,1516693375.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:55.619Z,1516693375.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:42:55.620Z,1516693375.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:56.029Z,1516693376.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:42:56.030Z,1516693376.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:56.444Z,1516693376.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:42:56.445Z,1516693376.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:56.832Z,1516693376.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:42:56.833Z,1516693376.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:57.219Z,1516693377.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:42:57.220Z,1516693377.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:57.626Z,1516693377.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:42:57.628Z,1516693377.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:58.027Z,1516693378.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:42:58.028Z,1516693378.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:58.431Z,1516693378.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:42:58.432Z,1516693378.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:58.828Z,1516693378.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:42:58.829Z,1516693378.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:59.234Z,1516693379.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:42:59.235Z,1516693379.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:42:59.638Z,1516693379.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:42:59.639Z,1516693379.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:00.037Z,1516693380.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:43:00.038Z,1516693380.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:00.438Z,1516693380.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:43:00.439Z,1516693380.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:00.811Z,1516693380.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:43:00.812Z,1516693380.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:01.214Z,1516693381.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:43:01.216Z,1516693381.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:01.611Z,1516693381.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:43:01.612Z,1516693381.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:02.018Z,1516693382.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:43:02.019Z,1516693382.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:02.418Z,1516693382.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:43:02.419Z,1516693382.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:02.821Z,1516693382.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:43:02.823Z,1516693382.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:03.219Z,1516693383.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:43:03.220Z,1516693383.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:03.611Z,1516693383.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:43:03.612Z,1516693383.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:04.022Z,1516693384.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:43:04.023Z,1516693384.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:04.422Z,1516693384.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:43:04.424Z,1516693384.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:04.825Z,1516693384.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:43:04.826Z,1516693384.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:05.225Z,1516693385.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:43:05.226Z,1516693385.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:05.626Z,1516693385.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:43:05.627Z,1516693385.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:06.033Z,1516693386.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:43:06.033Z,1516693386.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:06.421Z,1516693386.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:43:06.422Z,1516693386.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:06.805Z,1516693386.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:43:06.806Z,1516693386.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:07.212Z,1516693387.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:43:07.213Z,1516693387.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:07.626Z,1516693387.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:43:07.627Z,1516693387.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:08.027Z,1516693388.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:43:08.028Z,1516693388.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:08.437Z,1516693388.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:43:08.438Z,1516693388.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:08.836Z,1516693388.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:43:08.838Z,1516693388.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:09.218Z,1516693389.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:43:09.219Z,1516693389.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:09.616Z,1516693389.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:43:09.617Z,1516693389.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:10.028Z,1516693390.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:43:10.029Z,1516693390.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:10.418Z,1516693390.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:43:10.423Z,1516693390.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:10.820Z,1516693390.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:43:10.821Z,1516693390.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:11.230Z,1516693391.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:43:11.231Z,1516693391.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:11.631Z,1516693391.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:43:11.632Z,1516693391.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:12.037Z,1516693392.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:43:12.038Z,1516693392.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:12.441Z,1516693392.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:43:12.441Z,1516693392.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:12.805Z,1516693392.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:43:12.806Z,1516693392.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:13.233Z,1516693393.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:13.608Z,1516693393.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:14.046Z,1516693394.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:14.425Z,1516693394.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:14.826Z,1516693394.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:15.210Z,1516693395.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:15.612Z,1516693395.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:16.011Z,1516693396.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:16.417Z,1516693396.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:16.811Z,1516693396.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:17.224Z,1516693397.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:17.625Z,1516693397.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:18.021Z,1516693398.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:18.416Z,1516693398.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:18.821Z,1516693398.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:19.214Z,1516693399.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:19.616Z,1516693399.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:20.022Z,1516693400.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:20.433Z,1516693400.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:20.822Z,1516693400.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:21.221Z,1516693401.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:21.613Z,1516693401.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:22.021Z,1516693402.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:22.414Z,1516693402.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:22.813Z,1516693402.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:23.222Z,1516693403.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:23.629Z,1516693403.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:24.021Z,1516693404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:24.416Z,1516693404.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:24.819Z,1516693404.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:25.213Z,1516693405.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:25.622Z,1516693405.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:26.023Z,1516693406.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:26.433Z,1516693406.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:26.822Z,1516693406.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:27.219Z,1516693407.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:27.619Z,1516693407.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:28.023Z,1516693408.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:28.414Z,1516693408.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:28.819Z,1516693408.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:29.222Z,1516693409.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:29.625Z,1516693409.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:30.026Z,1516693410.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:30.418Z,1516693410.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:30.819Z,1516693410.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:31.220Z,1516693411.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:31.622Z,1516693411.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:32.032Z,1516693412.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:32.427Z,1516693412.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:32.828Z,1516693412.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:33.218Z,1516693413.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:33.619Z,1516693413.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:34.036Z,1516693414.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:34.429Z,1516693414.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:34.824Z,1516693414.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:35.223Z,1516693415.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:35.617Z,1516693415.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:36.022Z,1516693416.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:36.432Z,1516693416.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:36.823Z,1516693416.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:37.223Z,1516693417.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:37.614Z,1516693417.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:38.023Z,1516693418.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:38.430Z,1516693418.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:38.828Z,1516693418.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:39.218Z,1516693419.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:39.619Z,1516693419.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:40.029Z,1516693420.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:40.426Z,1516693420.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:40.830Z,1516693420.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:41.220Z,1516693421.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:41.619Z,1516693421.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:42.024Z,1516693422.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:42.437Z,1516693422.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:42.824Z,1516693422.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:43.219Z,1516693423.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:43.624Z,1516693423.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:44.026Z,1516693424.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:44.426Z,1516693424.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:44.828Z,1516693424.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:47.918Z,1516693427.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:48.064Z,1516693428.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:48.389Z,1516693428.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:48.821Z,1516693428.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:49.190Z,1516693429.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:49.583Z,1516693429.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:49.984Z,1516693429.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:50.385Z,1516693430.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:50.789Z,1516693430.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:51.190Z,1516693431.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:51.590Z,1516693431.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:51.993Z,1516693431.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:52.387Z,1516693432.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:52.782Z,1516693432.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:53.185Z,1516693433.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:53.583Z,1516693433.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:53.993Z,1516693433.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:54.390Z,1516693434.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:54.789Z,1516693434.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:55.182Z,1516693435.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:55.592Z,1516693435.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:55.984Z,1516693435.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:56.393Z,1516693436.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:56.793Z,1516693436.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:57.200Z,1516693437.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:57.583Z,1516693437.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:57.985Z,1516693437.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:58.384Z,1516693438.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:58.782Z,1516693438.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:59.206Z,1516693439.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:59.593Z,1516693439.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:43:59.994Z,1516693439.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:00.382Z,1516693440.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:00.783Z,1516693440.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:01.182Z,1516693441.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:01.585Z,1516693441.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:01.983Z,1516693441.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:02.393Z,1516693442.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:02.794Z,1516693442.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:03.200Z,1516693443.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:03.593Z,1516693443.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:03.982Z,1516693443.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:04.384Z,1516693444.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:04.782Z,1516693444.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:05.201Z,1516693445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:05.597Z,1516693445.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:05.993Z,1516693445.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:06.387Z,1516693446.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:06.789Z,1516693446.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:07.183Z,1516693447.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:07.594Z,1516693447.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:07.991Z,1516693447.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:08.393Z,1516693448.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:08.805Z,1516693448.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:09.197Z,1516693449.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:09.585Z,1516693449.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:09.985Z,1516693449.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:10.389Z,1516693450.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:10.782Z,1516693450.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:11.193Z,1516693451.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:11.604Z,1516693451.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:11.993Z,1516693451.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:12.385Z,1516693452.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:12.789Z,1516693452.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:13.183Z,1516693453.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:13.594Z,1516693453.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:13.983Z,1516693453.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:14.394Z,1516693454.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:14.797Z,1516693454.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:15.194Z,1516693455.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:15.585Z,1516693455.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:15.985Z,1516693455.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:16.423Z,1516693456.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:16.789Z,1516693456.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:17.205Z,1516693457.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:17.600Z,1516693457.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:17.647Z,1516693457.647 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:44:17.995Z,1516693457.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:18.385Z,1516693458.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:18.793Z,1516693458.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:19.189Z,1516693459.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:19.591Z,1516693459.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:20.000Z,1516693460.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:20.405Z,1516693460.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:20.805Z,1516693460.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:21.196Z,1516693461.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:21.584Z,1516693461.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:21.996Z,1516693461.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:22.397Z,1516693462.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:22.774Z,1516693462.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:23.197Z,1516693463.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:23.610Z,1516693463.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:23.998Z,1516693463.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:24.401Z,1516693464.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:24.780Z,1516693464.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:25.174Z,1516693465.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:25.609Z,1516693465.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:25.980Z,1516693465.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:26.411Z,1516693466.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:26.813Z,1516693466.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:27.218Z,1516693467.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:27.586Z,1516693467.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:27.990Z,1516693467.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:28.385Z,1516693468.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:28.782Z,1516693468.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:29.189Z,1516693469.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:29.590Z,1516693469.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:29.993Z,1516693469.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:30.383Z,1516693470.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:30.783Z,1516693470.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:31.182Z,1516693471.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:31.585Z,1516693471.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:31.983Z,1516693471.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:32.393Z,1516693472.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:32.790Z,1516693472.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:33.196Z,1516693473.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:33.587Z,1516693473.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:33.983Z,1516693473.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:34.384Z,1516693474.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:34.782Z,1516693474.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:35.193Z,1516693475.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:35.588Z,1516693475.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:35.993Z,1516693475.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:36.387Z,1516693476.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:36.788Z,1516693476.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:37.182Z,1516693477.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:37.593Z,1516693477.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:37.983Z,1516693477.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:38.393Z,1516693478.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:38.797Z,1516693478.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:39.193Z,1516693479.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:39.587Z,1516693479.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:39.983Z,1516693479.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:40.384Z,1516693480.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:40.782Z,1516693480.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:41.193Z,1516693481.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:41.589Z,1516693481.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:41.993Z,1516693481.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:42.389Z,1516693482.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:42.783Z,1516693482.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:43.182Z,1516693483.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:43.585Z,1516693483.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:43.984Z,1516693483.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:44.393Z,1516693484.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:44.790Z,1516693484.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:45.196Z,1516693485.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:48.280Z,1516693488.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:48.417Z,1516693488.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:48.770Z,1516693488.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:49.173Z,1516693489.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:49.570Z,1516693489.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:49.944Z,1516693489.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:50.351Z,1516693490.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:50.745Z,1516693490.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:51.171Z,1516693491.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:51.575Z,1516693491.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:51.970Z,1516693491.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:52.349Z,1516693492.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:52.751Z,1516693492.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:53.140Z,1516693493.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:53.552Z,1516693493.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:53.946Z,1516693493.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:54.354Z,1516693494.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:54.775Z,1516693494.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:55.178Z,1516693495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:55.553Z,1516693495.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:55.953Z,1516693495.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:56.349Z,1516693496.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:56.749Z,1516693496.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:57.154Z,1516693497.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:57.561Z,1516693497.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:57.966Z,1516693497.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:58.356Z,1516693498.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:58.753Z,1516693498.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:59.150Z,1516693499.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:59.559Z,1516693499.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:44:59.954Z,1516693499.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:00.369Z,1516693500.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:00.769Z,1516693500.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:01.162Z,1516693501.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:01.553Z,1516693501.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:01.960Z,1516693501.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:02.354Z,1516693502.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:02.750Z,1516693502.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:03.161Z,1516693503.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:03.563Z,1516693503.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:03.964Z,1516693503.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:04.357Z,1516693504.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:04.750Z,1516693504.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:05.160Z,1516693505.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:05.566Z,1516693505.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:05.961Z,1516693505.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:06.354Z,1516693506.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:06.759Z,1516693506.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:07.159Z,1516693507.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:07.562Z,1516693507.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:07.961Z,1516693507.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:08.360Z,1516693508.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:08.745Z,1516693508.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:09.165Z,1516693509.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:09.568Z,1516693509.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:09.967Z,1516693509.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:10.359Z,1516693510.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:10.760Z,1516693510.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:11.167Z,1516693511.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:11.562Z,1516693511.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:11.960Z,1516693511.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:12.360Z,1516693512.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:12.761Z,1516693512.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:13.166Z,1516693513.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:13.565Z,1516693513.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:13.966Z,1516693513.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:14.344Z,1516693514.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:14.738Z,1516693514.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:15.168Z,1516693515.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:15.570Z,1516693515.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:15.970Z,1516693515.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:16.348Z,1516693516.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:16.754Z,1516693516.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:17.157Z,1516693517.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:17.554Z,1516693517.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:17.953Z,1516693517.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:18.357Z,1516693518.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:18.753Z,1516693518.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:19.153Z,1516693519.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:19.558Z,1516693519.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:19.957Z,1516693519.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:20.352Z,1516693520.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:20.748Z,1516693520.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:21.157Z,1516693521.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:21.556Z,1516693521.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:21.957Z,1516693521.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:22.357Z,1516693522.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:22.752Z,1516693522.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:23.157Z,1516693523.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:23.558Z,1516693523.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:23.954Z,1516693523.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:24.346Z,1516693524.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:24.746Z,1516693524.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:25.167Z,1516693525.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:25.565Z,1516693525.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:25.965Z,1516693525.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:26.361Z,1516693526.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:26.747Z,1516693526.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:27.157Z,1516693527.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:27.562Z,1516693527.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:27.957Z,1516693527.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:28.349Z,1516693528.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:28.751Z,1516693528.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:29.157Z,1516693529.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:29.565Z,1516693529.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:29.958Z,1516693529.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:30.350Z,1516693530.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:30.749Z,1516693530.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:31.165Z,1516693531.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:31.565Z,1516693531.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:31.965Z,1516693531.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:32.361Z,1516693532.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:32.752Z,1516693532.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:33.157Z,1516693533.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:33.567Z,1516693533.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:33.958Z,1516693533.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:34.356Z,1516693534.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:34.762Z,1516693534.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:35.165Z,1516693535.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:35.573Z,1516693535.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:35.964Z,1516693535.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:36.371Z,1516693536.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:36.767Z,1516693536.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:37.166Z,1516693537.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:37.579Z,1516693537.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:38.024Z,1516693538.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:38.381Z,1516693538.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:38.772Z,1516693538.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:39.182Z,1516693539.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:39.579Z,1516693539.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:39.982Z,1516693539.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:40.358Z,1516693540.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:40.750Z,1516693540.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:41.180Z,1516693541.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:41.555Z,1516693541.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:41.965Z,1516693541.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:42.369Z,1516693542.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:42.764Z,1516693542.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:43.173Z,1516693543.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:43.574Z,1516693543.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:43.989Z,1516693543.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:44.382Z,1516693544.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:44.418Z,1516693544.418 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:45:44.418Z,1516693544.418 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:45:44.418Z,1516693544.418 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:45:44.418Z,1516693544.418 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:45:44.750Z,1516693544.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:44.777Z,1516693544.777 [Default:CheckIn:D] Stopped 2018-01-23T07:45:44.777Z,1516693544.777 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:45:45.193Z,1516693545.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:45.200Z,1516693545.200 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 267.878613 min 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn:E] Stopped 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn] Stopped 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn](INFO): Running loop #27 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn] Running Loop=27 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:45:45.201Z,1516693545.201 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:45:45.597Z,1516693545.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:52.317Z,1516693552.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:52.469Z,1516693552.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:52.856Z,1516693552.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:53.272Z,1516693553.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:53.658Z,1516693553.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:54.029Z,1516693554.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:54.437Z,1516693554.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:54.437Z,1516693554.437 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-01-23T07:45:54.437Z,1516693554.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:45:54.439Z,1516693554.439 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:54.439Z,1516693554.439 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-01-23T07:45:54.439Z,1516693554.439 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:45:54.441Z,1516693554.441 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:54.441Z,1516693554.441 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90 2018-01-23T07:45:54.441Z,1516693554.441 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:45:54.482Z,1516693554.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:45:54.483Z,1516693554.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:45:54.484Z,1516693554.484 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:45:54.848Z,1516693554.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:45:54.848Z,1516693554.848 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-01-23T07:45:54.849Z,1516693554.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:45:54.849Z,1516693554.849 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-01-23T07:45:54.849Z,1516693554.849 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:45:54.849Z,1516693554.849 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90 2018-01-23T07:45:55.243Z,1516693555.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:45:55.244Z,1516693555.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:45:55.244Z,1516693555.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:45:55.245Z,1516693555.245 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:45:55.245Z,1516693555.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:45:55.245Z,1516693555.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:45:55.246Z,1516693555.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:45:55.246Z,1516693555.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:45:55.246Z,1516693555.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:45:55.632Z,1516693555.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:45:55.633Z,1516693555.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:56.035Z,1516693556.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:45:56.036Z,1516693556.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:56.439Z,1516693556.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:45:56.440Z,1516693556.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:56.832Z,1516693556.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:45:56.833Z,1516693556.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:57.238Z,1516693557.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:45:57.239Z,1516693557.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:57.648Z,1516693557.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:45:57.649Z,1516693557.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:58.041Z,1516693558.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:45:58.043Z,1516693558.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:58.435Z,1516693558.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:45:58.436Z,1516693558.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:58.836Z,1516693558.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:45:58.837Z,1516693558.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:59.241Z,1516693559.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:45:59.242Z,1516693559.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:45:59.649Z,1516693559.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:45:59.650Z,1516693559.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:00.041Z,1516693560.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:46:00.042Z,1516693560.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:00.429Z,1516693560.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:46:00.430Z,1516693560.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:00.835Z,1516693560.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:46:00.836Z,1516693560.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:01.252Z,1516693561.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:46:01.253Z,1516693561.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:01.642Z,1516693561.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:46:01.643Z,1516693561.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:02.047Z,1516693562.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:46:02.048Z,1516693562.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:02.434Z,1516693562.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:46:02.435Z,1516693562.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:02.836Z,1516693562.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:46:02.837Z,1516693562.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:03.238Z,1516693563.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:46:03.239Z,1516693563.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:03.648Z,1516693563.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:46:03.649Z,1516693563.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:04.041Z,1516693564.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:46:04.042Z,1516693564.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:04.435Z,1516693564.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:46:04.436Z,1516693564.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:04.835Z,1516693564.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:46:04.836Z,1516693564.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:05.242Z,1516693565.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:46:05.243Z,1516693565.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:05.642Z,1516693565.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:46:05.643Z,1516693565.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:06.048Z,1516693566.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:46:06.049Z,1516693566.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:06.435Z,1516693566.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:46:06.436Z,1516693566.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:06.835Z,1516693566.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:46:06.836Z,1516693566.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:07.256Z,1516693567.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:46:07.257Z,1516693567.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:07.652Z,1516693567.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:46:07.653Z,1516693567.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:08.047Z,1516693568.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:46:08.048Z,1516693568.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:08.440Z,1516693568.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:46:08.441Z,1516693568.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:08.838Z,1516693568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:46:08.840Z,1516693568.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:09.247Z,1516693569.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:46:09.248Z,1516693569.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:09.643Z,1516693569.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:46:09.644Z,1516693569.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:10.048Z,1516693570.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:46:10.049Z,1516693570.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:10.431Z,1516693570.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:46:10.432Z,1516693570.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:10.818Z,1516693570.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:46:10.819Z,1516693570.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:11.246Z,1516693571.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:46:11.251Z,1516693571.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:11.656Z,1516693571.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:46:11.657Z,1516693571.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:12.053Z,1516693572.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:46:12.054Z,1516693572.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:12.428Z,1516693572.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:46:12.429Z,1516693572.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:12.825Z,1516693572.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:46:12.826Z,1516693572.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:13.233Z,1516693573.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:46:13.234Z,1516693573.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:13.633Z,1516693573.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:46:13.634Z,1516693573.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:14.063Z,1516693574.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:46:14.064Z,1516693574.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:14.428Z,1516693574.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:46:14.429Z,1516693574.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:14.833Z,1516693574.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:15.230Z,1516693575.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:15.633Z,1516693575.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:16.030Z,1516693576.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:16.464Z,1516693576.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:16.826Z,1516693576.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:17.290Z,1516693577.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:17.638Z,1516693577.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:18.033Z,1516693578.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:18.437Z,1516693578.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:18.831Z,1516693578.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:19.233Z,1516693579.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:19.634Z,1516693579.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:20.094Z,1516693580.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:20.421Z,1516693580.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:20.821Z,1516693580.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:21.234Z,1516693581.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:21.633Z,1516693581.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:22.045Z,1516693582.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:22.456Z,1516693582.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:22.836Z,1516693582.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:23.255Z,1516693583.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:23.663Z,1516693583.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:24.036Z,1516693584.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:24.430Z,1516693584.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:24.827Z,1516693584.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:25.231Z,1516693585.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:25.634Z,1516693585.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:26.030Z,1516693586.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:26.428Z,1516693586.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:26.828Z,1516693586.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:27.263Z,1516693587.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:27.719Z,1516693587.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:28.046Z,1516693588.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:28.437Z,1516693588.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:28.841Z,1516693588.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:29.250Z,1516693589.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:29.644Z,1516693589.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:30.039Z,1516693590.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:30.430Z,1516693590.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:30.836Z,1516693590.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:31.241Z,1516693591.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:31.645Z,1516693591.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:32.038Z,1516693592.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:32.436Z,1516693592.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:32.826Z,1516693592.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:33.237Z,1516693593.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:33.644Z,1516693593.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:34.047Z,1516693594.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:34.448Z,1516693594.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:34.841Z,1516693594.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:35.217Z,1516693595.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:35.620Z,1516693595.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:36.024Z,1516693596.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:36.445Z,1516693596.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:36.849Z,1516693596.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:37.248Z,1516693597.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:37.617Z,1516693597.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:38.025Z,1516693598.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:38.456Z,1516693598.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:38.819Z,1516693598.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:39.251Z,1516693599.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:39.646Z,1516693599.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:40.054Z,1516693600.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:40.458Z,1516693600.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:40.827Z,1516693600.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:41.224Z,1516693601.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:41.632Z,1516693601.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:42.031Z,1516693602.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:42.437Z,1516693602.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:42.841Z,1516693602.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:43.245Z,1516693603.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:43.626Z,1516693603.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:44.026Z,1516693604.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:44.437Z,1516693604.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:44.831Z,1516693604.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:45.233Z,1516693605.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:45.637Z,1516693605.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:48.741Z,1516693608.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:48.877Z,1516693608.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:49.235Z,1516693609.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:49.645Z,1516693609.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:50.040Z,1516693610.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:50.438Z,1516693610.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:50.838Z,1516693610.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:51.267Z,1516693611.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:51.637Z,1516693611.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:52.034Z,1516693612.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:52.436Z,1516693612.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:52.850Z,1516693612.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:53.234Z,1516693613.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:53.638Z,1516693613.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:54.041Z,1516693614.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:54.442Z,1516693614.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:54.840Z,1516693614.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:55.235Z,1516693615.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:55.634Z,1516693615.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:56.045Z,1516693616.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:56.470Z,1516693616.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:56.845Z,1516693616.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:57.242Z,1516693617.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:57.639Z,1516693617.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:58.037Z,1516693618.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:58.438Z,1516693618.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:58.836Z,1516693618.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:59.239Z,1516693619.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:46:59.667Z,1516693619.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:00.045Z,1516693620.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:00.442Z,1516693620.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:00.843Z,1516693620.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:01.239Z,1516693621.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:01.643Z,1516693621.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:02.038Z,1516693622.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:02.447Z,1516693622.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:02.844Z,1516693622.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:03.268Z,1516693623.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:03.638Z,1516693623.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:04.049Z,1516693624.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:04.440Z,1516693624.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:04.845Z,1516693624.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:05.250Z,1516693625.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:05.654Z,1516693625.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:06.051Z,1516693626.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:06.450Z,1516693626.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:06.840Z,1516693626.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:07.249Z,1516693627.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:07.639Z,1516693627.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:08.037Z,1516693628.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:08.450Z,1516693628.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:08.862Z,1516693628.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:09.250Z,1516693629.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:09.645Z,1516693629.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:10.048Z,1516693630.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:10.449Z,1516693630.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:10.845Z,1516693630.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:11.237Z,1516693631.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:11.650Z,1516693631.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:12.057Z,1516693632.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:12.457Z,1516693632.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:12.838Z,1516693632.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:13.240Z,1516693633.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:13.648Z,1516693633.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:14.040Z,1516693634.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:14.449Z,1516693634.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:14.847Z,1516693634.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:15.249Z,1516693635.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:15.651Z,1516693635.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:16.037Z,1516693636.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:16.439Z,1516693636.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:16.849Z,1516693636.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:17.238Z,1516693637.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:17.648Z,1516693637.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:18.056Z,1516693638.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:18.449Z,1516693638.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:18.856Z,1516693638.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:19.236Z,1516693639.236 [PNI_TCM](ERROR): CRC does not match. Expected:0x33974 got:0x13578 2018-01-23T07:47:19.264Z,1516693639.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:19.642Z,1516693639.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:20.065Z,1516693640.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:20.445Z,1516693640.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x27549 got:0x41500 2018-01-23T07:47:20.465Z,1516693640.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:20.858Z,1516693640.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:21.247Z,1516693641.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:21.649Z,1516693641.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:22.043Z,1516693642.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:22.442Z,1516693642.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:22.849Z,1516693642.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:23.249Z,1516693643.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:23.651Z,1516693643.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:24.053Z,1516693644.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:24.449Z,1516693644.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:24.850Z,1516693644.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:25.252Z,1516693645.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:25.646Z,1516693645.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:26.046Z,1516693646.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:26.457Z,1516693646.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:26.860Z,1516693646.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:27.251Z,1516693647.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:27.643Z,1516693647.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:28.062Z,1516693648.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:28.436Z,1516693648.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:28.837Z,1516693648.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:29.237Z,1516693649.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:29.662Z,1516693649.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:30.066Z,1516693650.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:30.465Z,1516693650.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:30.837Z,1516693650.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:31.262Z,1516693651.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:31.635Z,1516693651.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:32.036Z,1516693652.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:32.464Z,1516693652.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:32.865Z,1516693652.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:33.237Z,1516693653.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:33.644Z,1516693653.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:34.038Z,1516693654.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:34.434Z,1516693654.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:34.844Z,1516693654.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:35.242Z,1516693655.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:35.648Z,1516693655.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:36.075Z,1516693656.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:36.445Z,1516693656.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:36.834Z,1516693656.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:37.246Z,1516693657.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:37.638Z,1516693657.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:38.043Z,1516693658.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:38.456Z,1516693658.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:38.861Z,1516693658.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:39.274Z,1516693659.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:39.645Z,1516693659.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:40.050Z,1516693660.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:40.448Z,1516693660.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:40.861Z,1516693660.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:41.262Z,1516693661.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:41.660Z,1516693661.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:42.067Z,1516693662.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:42.471Z,1516693662.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:42.841Z,1516693662.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:43.238Z,1516693663.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:43.641Z,1516693663.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:44.040Z,1516693664.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:44.442Z,1516693664.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:44.842Z,1516693664.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:45.252Z,1516693665.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:45.651Z,1516693665.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:48.732Z,1516693668.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:48.884Z,1516693668.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:49.202Z,1516693669.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:49.629Z,1516693669.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:50.002Z,1516693670.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:50.398Z,1516693670.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:50.804Z,1516693670.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:51.196Z,1516693671.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:51.602Z,1516693671.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:52.005Z,1516693672.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:52.414Z,1516693672.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:52.805Z,1516693672.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:53.199Z,1516693673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:53.601Z,1516693673.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:53.999Z,1516693673.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:54.412Z,1516693674.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:54.809Z,1516693674.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:55.209Z,1516693675.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:55.603Z,1516693675.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:55.998Z,1516693675.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:56.409Z,1516693676.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:56.817Z,1516693676.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:57.206Z,1516693677.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:57.601Z,1516693677.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:57.000Z,1516693678.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:58.406Z,1516693678.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:58.806Z,1516693678.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:59.213Z,1516693679.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:59.601Z,1516693679.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:47:59.998Z,1516693679.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:00.412Z,1516693680.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:00.808Z,1516693680.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:01.206Z,1516693681.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:01.600Z,1516693681.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:01.998Z,1516693681.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:02.409Z,1516693682.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:02.810Z,1516693682.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:03.209Z,1516693683.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:03.601Z,1516693683.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:04.000Z,1516693684.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:04.409Z,1516693684.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:04.810Z,1516693684.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:05.205Z,1516693685.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:05.601Z,1516693685.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:06.004Z,1516693686.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:06.406Z,1516693686.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:06.806Z,1516693686.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:07.209Z,1516693687.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:07.613Z,1516693687.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:07.998Z,1516693687.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:08.409Z,1516693688.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:08.809Z,1516693688.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:09.214Z,1516693689.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:09.604Z,1516693689.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:10.011Z,1516693690.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:10.409Z,1516693690.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:10.821Z,1516693690.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:11.210Z,1516693691.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:11.601Z,1516693691.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:12.001Z,1516693692.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:12.417Z,1516693692.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:12.821Z,1516693692.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:13.221Z,1516693693.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:13.606Z,1516693693.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:14.008Z,1516693694.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:14.414Z,1516693694.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:14.823Z,1516693694.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:15.218Z,1516693695.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:15.610Z,1516693695.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:16.009Z,1516693696.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:16.412Z,1516693696.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:16.818Z,1516693696.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:17.214Z,1516693697.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:17.616Z,1516693697.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:18.011Z,1516693698.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:18.434Z,1516693698.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:18.819Z,1516693698.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:19.225Z,1516693699.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:19.613Z,1516693699.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:19.997Z,1516693699.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:20.423Z,1516693700.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:20.823Z,1516693700.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:21.217Z,1516693701.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:21.625Z,1516693701.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:21.996Z,1516693701.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:22.372Z,1516693702.372 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T07:48:22.372Z,1516693702.372 [NAL9602] Data Fault, FailCount= 5 2018-01-23T07:48:22.372Z,1516693702.372 [NAL9602](ERROR): Data Fault 2018-01-23T07:48:22.404Z,1516693702.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:22.438Z,1516693702.438 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T07:48:22.443Z,1516693702.443 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T07:48:22.764Z,1516693702.764 [NAL9602](INFO): Powering down 2018-01-23T07:48:22.810Z,1516693702.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:22.829Z,1516693702.829 [CBIT](INFO): Critical error at 20180123T074822 2018-01-23T07:48:23.198Z,1516693703.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:23.599Z,1516693703.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:23.997Z,1516693703.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:24.401Z,1516693704.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:24.797Z,1516693704.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:25.202Z,1516693705.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:25.600Z,1516693705.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:25.998Z,1516693705.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:26.404Z,1516693706.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:26.794Z,1516693706.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:27.197Z,1516693707.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:27.597Z,1516693707.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:27.994Z,1516693707.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:28.397Z,1516693708.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:28.800Z,1516693708.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:29.195Z,1516693709.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:29.597Z,1516693709.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:30.000Z,1516693710.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:30.400Z,1516693710.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:30.801Z,1516693710.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:31.200Z,1516693711.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:31.600Z,1516693711.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:32.001Z,1516693712.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:32.404Z,1516693712.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:32.795Z,1516693712.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:33.197Z,1516693713.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:33.600Z,1516693713.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:33.994Z,1516693713.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:34.398Z,1516693714.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:34.804Z,1516693714.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:35.195Z,1516693715.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:35.598Z,1516693715.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:36.004Z,1516693716.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:36.400Z,1516693716.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:36.802Z,1516693716.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:37.201Z,1516693717.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:37.605Z,1516693717.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:37.998Z,1516693717.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:38.404Z,1516693718.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:38.797Z,1516693718.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:39.202Z,1516693719.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:39.604Z,1516693719.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:40.005Z,1516693720.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:40.397Z,1516693720.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:40.804Z,1516693720.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:41.197Z,1516693721.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:41.604Z,1516693721.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:41.997Z,1516693721.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:42.401Z,1516693722.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:42.802Z,1516693722.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:43.204Z,1516693723.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:43.601Z,1516693723.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:43.000Z,1516693724.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:44.400Z,1516693724.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:44.805Z,1516693724.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:45.206Z,1516693725.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:45.600Z,1516693725.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:45.998Z,1516693725.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:49.106Z,1516693729.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:49.244Z,1516693729.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:49.566Z,1516693729.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:49.974Z,1516693729.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:50.367Z,1516693730.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:50.770Z,1516693730.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:51.168Z,1516693731.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:51.568Z,1516693731.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:51.974Z,1516693731.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:52.368Z,1516693732.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:52.768Z,1516693732.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:53.168Z,1516693733.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:53.576Z,1516693733.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:53.970Z,1516693733.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:54.371Z,1516693734.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:54.785Z,1516693734.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:55.173Z,1516693735.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:55.581Z,1516693735.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:55.581Z,1516693735.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-01-23T07:48:55.581Z,1516693735.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:48:55.600Z,1516693735.600 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:55.600Z,1516693735.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-01-23T07:48:55.600Z,1516693735.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:48:55.602Z,1516693735.602 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:55.602Z,1516693735.602 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91 2018-01-23T07:48:55.602Z,1516693735.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:48:55.636Z,1516693735.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:48:55.636Z,1516693735.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:48:55.636Z,1516693735.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:48:55.995Z,1516693735.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:48:55.995Z,1516693735.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-01-23T07:48:55.996Z,1516693735.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:48:55.996Z,1516693735.996 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-01-23T07:48:55.996Z,1516693735.996 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:48:55.996Z,1516693735.996 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91 2018-01-23T07:48:56.378Z,1516693736.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:48:56.380Z,1516693736.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:48:56.380Z,1516693736.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:48:56.381Z,1516693736.381 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:48:56.381Z,1516693736.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:48:56.381Z,1516693736.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:48:56.382Z,1516693736.382 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:48:56.382Z,1516693736.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:48:56.382Z,1516693736.382 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:48:56.782Z,1516693736.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:48:56.784Z,1516693736.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:57.180Z,1516693737.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:48:57.181Z,1516693737.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:57.577Z,1516693737.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:48:57.578Z,1516693737.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:57.984Z,1516693737.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:48:57.985Z,1516693737.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:58.380Z,1516693738.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:48:58.381Z,1516693738.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:58.780Z,1516693738.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:48:58.780Z,1516693738.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:59.179Z,1516693739.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:48:59.180Z,1516693739.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:59.585Z,1516693739.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:48:59.586Z,1516693739.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:48:59.982Z,1516693739.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:48:59.984Z,1516693739.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:00.382Z,1516693740.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:49:00.383Z,1516693740.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:00.760Z,1516693740.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T07:49:00.761Z,1516693740.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:01.162Z,1516693741.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T07:49:01.164Z,1516693741.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:01.561Z,1516693741.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T07:49:01.562Z,1516693741.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:01.963Z,1516693741.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T07:49:01.964Z,1516693741.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:02.374Z,1516693742.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T07:49:02.395Z,1516693742.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:02.770Z,1516693742.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T07:49:02.771Z,1516693742.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:03.165Z,1516693743.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T07:49:03.166Z,1516693743.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:03.574Z,1516693743.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:49:03.575Z,1516693743.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:03.967Z,1516693743.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:49:03.968Z,1516693743.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:04.368Z,1516693744.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:49:04.369Z,1516693744.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:04.771Z,1516693744.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:49:04.772Z,1516693744.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:05.168Z,1516693745.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:49:05.169Z,1516693745.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:05.568Z,1516693745.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:49:05.569Z,1516693745.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:05.971Z,1516693745.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:49:05.972Z,1516693745.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:06.368Z,1516693746.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:49:06.369Z,1516693746.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:06.764Z,1516693746.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:49:06.765Z,1516693746.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:07.168Z,1516693747.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:49:07.169Z,1516693747.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:07.575Z,1516693747.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:49:07.576Z,1516693747.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:07.965Z,1516693747.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:49:07.966Z,1516693747.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:08.368Z,1516693748.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:49:08.369Z,1516693748.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:08.768Z,1516693748.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:49:08.769Z,1516693748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:09.166Z,1516693749.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:49:09.167Z,1516693749.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:09.568Z,1516693749.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:49:09.569Z,1516693749.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:09.968Z,1516693749.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:49:09.968Z,1516693749.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:10.368Z,1516693750.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:49:10.369Z,1516693750.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:10.769Z,1516693750.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:49:10.770Z,1516693750.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:11.175Z,1516693751.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:49:11.176Z,1516693751.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:11.568Z,1516693751.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:49:11.569Z,1516693751.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:11.970Z,1516693751.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:49:11.976Z,1516693751.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:12.370Z,1516693752.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:49:12.371Z,1516693752.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:12.766Z,1516693752.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:49:12.767Z,1516693752.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:13.176Z,1516693753.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:49:13.177Z,1516693753.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:13.570Z,1516693753.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:49:13.571Z,1516693753.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:13.968Z,1516693753.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:49:13.969Z,1516693753.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:14.369Z,1516693754.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:49:14.369Z,1516693754.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:14.769Z,1516693754.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:49:14.770Z,1516693754.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:15.167Z,1516693755.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:49:15.168Z,1516693755.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:15.569Z,1516693755.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:49:15.569Z,1516693755.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:15.972Z,1516693755.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:16.370Z,1516693756.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:16.770Z,1516693756.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:17.172Z,1516693757.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:17.568Z,1516693757.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:17.969Z,1516693757.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:18.372Z,1516693758.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:18.776Z,1516693758.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:19.172Z,1516693759.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:19.572Z,1516693759.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:19.969Z,1516693759.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:20.371Z,1516693760.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:20.770Z,1516693760.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:21.166Z,1516693761.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:21.571Z,1516693761.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:21.972Z,1516693761.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:22.376Z,1516693762.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:22.771Z,1516693762.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:23.171Z,1516693763.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:23.571Z,1516693763.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:23.972Z,1516693763.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:24.369Z,1516693764.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:24.769Z,1516693764.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:25.169Z,1516693765.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:25.571Z,1516693765.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:25.969Z,1516693765.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:26.370Z,1516693766.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:26.771Z,1516693766.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:27.169Z,1516693767.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:27.569Z,1516693767.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:27.981Z,1516693767.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:28.373Z,1516693768.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:28.781Z,1516693768.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:29.170Z,1516693769.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:29.570Z,1516693769.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:29.976Z,1516693769.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:30.370Z,1516693770.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:30.771Z,1516693770.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:31.181Z,1516693771.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:31.572Z,1516693771.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:31.972Z,1516693771.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:32.383Z,1516693772.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:32.772Z,1516693772.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:33.177Z,1516693773.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:33.575Z,1516693773.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:33.974Z,1516693773.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:34.372Z,1516693774.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:34.772Z,1516693774.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:35.173Z,1516693775.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:35.584Z,1516693775.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:35.976Z,1516693775.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:36.373Z,1516693776.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:36.771Z,1516693776.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:37.171Z,1516693777.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:37.581Z,1516693777.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:37.980Z,1516693777.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:38.372Z,1516693778.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:38.773Z,1516693778.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:39.173Z,1516693779.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:39.570Z,1516693779.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:39.974Z,1516693779.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:40.372Z,1516693780.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:40.773Z,1516693780.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:41.179Z,1516693781.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:41.576Z,1516693781.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:41.974Z,1516693781.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:42.379Z,1516693782.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:42.780Z,1516693782.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:43.176Z,1516693783.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:43.576Z,1516693783.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:43.980Z,1516693783.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:44.371Z,1516693784.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:44.779Z,1516693784.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:45.180Z,1516693785.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:45.576Z,1516693785.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:45.979Z,1516693785.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:46.379Z,1516693786.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:49.474Z,1516693789.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:49.591Z,1516693789.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:49.955Z,1516693789.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:50.338Z,1516693790.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:50.742Z,1516693790.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:51.144Z,1516693791.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:51.535Z,1516693791.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:51.940Z,1516693791.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:52.345Z,1516693792.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:52.735Z,1516693792.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:53.140Z,1516693793.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:53.537Z,1516693793.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:53.937Z,1516693793.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:54.340Z,1516693794.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:54.742Z,1516693794.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:55.135Z,1516693795.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:55.540Z,1516693795.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:55.947Z,1516693795.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:56.334Z,1516693796.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:56.740Z,1516693796.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:57.148Z,1516693797.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:57.537Z,1516693797.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:57.939Z,1516693797.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:58.340Z,1516693798.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:58.734Z,1516693798.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:59.140Z,1516693799.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:59.540Z,1516693799.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:49:59.940Z,1516693799.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:00.345Z,1516693800.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:00.745Z,1516693800.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:01.138Z,1516693801.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:01.540Z,1516693801.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:01.953Z,1516693801.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:02.338Z,1516693802.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:02.740Z,1516693802.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:03.140Z,1516693803.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:03.541Z,1516693803.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:03.940Z,1516693803.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:04.340Z,1516693804.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:04.738Z,1516693804.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:05.146Z,1516693805.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:05.546Z,1516693805.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:05.939Z,1516693805.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:06.346Z,1516693806.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:06.749Z,1516693806.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:07.140Z,1516693807.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:07.544Z,1516693807.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:07.941Z,1516693807.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:08.353Z,1516693808.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:08.743Z,1516693808.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:09.150Z,1516693809.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:09.544Z,1516693809.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:09.947Z,1516693809.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:10.347Z,1516693810.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:10.739Z,1516693810.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:11.137Z,1516693811.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:11.547Z,1516693811.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:11.946Z,1516693811.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:12.338Z,1516693812.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:12.744Z,1516693812.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:13.140Z,1516693813.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:13.547Z,1516693813.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:13.941Z,1516693813.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:14.349Z,1516693814.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:14.741Z,1516693814.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:15.150Z,1516693815.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:15.542Z,1516693815.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:15.938Z,1516693815.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:16.342Z,1516693816.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:16.745Z,1516693816.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:17.139Z,1516693817.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:17.548Z,1516693817.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:17.944Z,1516693817.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:18.338Z,1516693818.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:18.749Z,1516693818.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:19.144Z,1516693819.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:19.545Z,1516693819.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:19.940Z,1516693819.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:20.348Z,1516693820.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:20.739Z,1516693820.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:21.151Z,1516693821.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:21.539Z,1516693821.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:21.946Z,1516693821.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:22.349Z,1516693822.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:22.745Z,1516693822.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:22.757Z,1516693822.757 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T07:50:22.758Z,1516693822.758 [NAL9602] No Fault, FailCount= 5 2018-01-23T07:50:23.097Z,1516693823.097 [NAL9602](INFO): Powering up NAL9602 2018-01-23T07:50:23.145Z,1516693823.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:23.542Z,1516693823.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:23.942Z,1516693823.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:24.346Z,1516693824.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:24.744Z,1516693824.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:25.143Z,1516693825.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:25.547Z,1516693825.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:25.953Z,1516693825.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:26.352Z,1516693826.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:26.749Z,1516693826.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:27.153Z,1516693827.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:27.552Z,1516693827.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:27.930Z,1516693827.930 [PNI_TCM](ERROR): CRC does not match. Expected:0x3963 got:0x43800 2018-01-23T07:50:27.951Z,1516693827.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:28.352Z,1516693828.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:28.752Z,1516693828.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:29.156Z,1516693829.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:29.550Z,1516693829.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:29.932Z,1516693829.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:30.337Z,1516693830.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:30.765Z,1516693830.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:31.130Z,1516693831.130 [PNI_TCM](ERROR): CRC does not match. Expected:0x9733 got:0x15532 2018-01-23T07:50:31.163Z,1516693831.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:31.541Z,1516693831.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:31.945Z,1516693831.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:32.345Z,1516693832.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:32.738Z,1516693832.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:33.145Z,1516693833.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:33.566Z,1516693833.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:33.905Z,1516693833.905 [NAL9602](INFO): NAL9602 initialized 2018-01-23T07:50:33.971Z,1516693833.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:34.342Z,1516693834.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:34.748Z,1516693834.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:35.146Z,1516693835.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:35.568Z,1516693835.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:35.934Z,1516693835.934 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T07:50:35.959Z,1516693835.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:36.334Z,1516693836.334 [PNI_TCM](ERROR): CRC does not match. Expected:0x42273 got:0x218 2018-01-23T07:50:36.367Z,1516693836.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:36.746Z,1516693836.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:37.170Z,1516693837.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:37.544Z,1516693837.544 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T07:50:37.580Z,1516693837.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:37.953Z,1516693837.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:38.346Z,1516693838.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:38.757Z,1516693838.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:39.144Z,1516693839.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:39.542Z,1516693839.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:39.948Z,1516693839.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:40.369Z,1516693840.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:40.749Z,1516693840.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:41.141Z,1516693841.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:41.542Z,1516693841.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:41.953Z,1516693841.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:42.343Z,1516693842.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:42.746Z,1516693842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:43.156Z,1516693843.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:43.573Z,1516693843.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:43.953Z,1516693843.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:44.347Z,1516693844.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:44.744Z,1516693844.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:45.162Z,1516693845.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:45.548Z,1516693845.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:45.552Z,1516693845.552 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:45:45.2Z 2018-01-23T07:50:45.552Z,1516693845.552 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T07:50:45.552Z,1516693845.552 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T07:50:45.959Z,1516693845.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:46.493Z,1516693846.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:46.776Z,1516693846.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:49.840Z,1516693849.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:49.918Z,1516693849.918 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0108.lzma 2018-01-23T07:50:49.989Z,1516693849.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:50.310Z,1516693850.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:50.661Z,1516693850.661 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0108.lzma.bak 2018-01-23T07:50:50.661Z,1516693850.661 [DataOverHttps](INFO): SBD MOMSN=7755234 2018-01-23T07:50:50.742Z,1516693850.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:51.458Z,1516693851.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:51.594Z,1516693851.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:54.647Z,1516693854.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:54.786Z,1516693854.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:55.114Z,1516693855.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:55.543Z,1516693855.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:55.926Z,1516693855.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:56.316Z,1516693856.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:59.428Z,1516693859.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:59.511Z,1516693859.511 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0109.lzma 2018-01-23T07:50:59.561Z,1516693859.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:50:59.930Z,1516693859.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:00.277Z,1516693860.277 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0109.lzma.bak 2018-01-23T07:51:00.277Z,1516693860.277 [DataOverHttps](INFO): SBD MOMSN=7755237 2018-01-23T07:51:00.354Z,1516693860.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:00.970Z,1516693860.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:00.973Z,1516693860.973 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T07:51:00.973Z,1516693860.973 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T07:51:00.973Z,1516693860.973 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T07:51:01.146Z,1516693861.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:04.231Z,1516693864.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:04.369Z,1516693864.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:04.734Z,1516693864.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:05.137Z,1516693865.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:05.533Z,1516693865.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:05.929Z,1516693865.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:06.324Z,1516693866.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:06.729Z,1516693866.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:07.136Z,1516693867.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:07.532Z,1516693867.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:07.937Z,1516693867.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:08.333Z,1516693868.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:08.723Z,1516693868.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:09.215Z,1516693869.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:09.533Z,1516693869.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:09.933Z,1516693869.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:10.337Z,1516693870.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:10.737Z,1516693870.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:11.168Z,1516693871.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:11.533Z,1516693871.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:11.925Z,1516693871.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:12.337Z,1516693872.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:12.722Z,1516693872.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:13.141Z,1516693873.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:13.536Z,1516693873.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:13.933Z,1516693873.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:14.326Z,1516693874.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:14.728Z,1516693874.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:15.125Z,1516693875.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:15.522Z,1516693875.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:15.934Z,1516693875.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:16.333Z,1516693876.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:16.733Z,1516693876.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:17.128Z,1516693877.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:17.549Z,1516693877.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:17.929Z,1516693877.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:18.323Z,1516693878.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:18.722Z,1516693878.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:19.126Z,1516693879.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:19.529Z,1516693879.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:19.926Z,1516693879.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:20.322Z,1516693880.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:20.725Z,1516693880.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:21.125Z,1516693881.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:21.518Z,1516693881.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:21.930Z,1516693881.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:22.331Z,1516693882.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:22.737Z,1516693882.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:23.125Z,1516693883.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:23.526Z,1516693883.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:23.925Z,1516693883.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:24.325Z,1516693884.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:24.725Z,1516693884.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:25.132Z,1516693885.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:25.536Z,1516693885.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:25.937Z,1516693885.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:26.330Z,1516693886.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:26.725Z,1516693886.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:27.128Z,1516693887.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:27.525Z,1516693887.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:27.935Z,1516693887.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:28.341Z,1516693888.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:28.745Z,1516693888.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:29.124Z,1516693889.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:29.526Z,1516693889.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:29.926Z,1516693889.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:30.325Z,1516693890.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:30.729Z,1516693890.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:31.138Z,1516693891.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:31.539Z,1516693891.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:31.935Z,1516693891.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:32.333Z,1516693892.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:32.730Z,1516693892.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:33.130Z,1516693893.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:33.532Z,1516693893.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:33.942Z,1516693893.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:34.336Z,1516693894.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:34.744Z,1516693894.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:35.132Z,1516693895.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:35.533Z,1516693895.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:35.931Z,1516693895.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:36.332Z,1516693896.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:36.733Z,1516693896.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:37.144Z,1516693897.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:37.548Z,1516693897.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:37.934Z,1516693897.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:38.331Z,1516693898.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:38.733Z,1516693898.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:39.129Z,1516693899.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:39.531Z,1516693899.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:39.945Z,1516693899.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:40.335Z,1516693900.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:40.735Z,1516693900.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:41.135Z,1516693901.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:41.529Z,1516693901.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:41.931Z,1516693901.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:42.344Z,1516693902.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:42.725Z,1516693902.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:43.138Z,1516693903.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:43.544Z,1516693903.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:43.934Z,1516693903.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:44.331Z,1516693904.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:44.732Z,1516693904.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:45.132Z,1516693905.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:45.535Z,1516693905.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:45.945Z,1516693905.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:46.343Z,1516693906.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:46.743Z,1516693906.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:47.136Z,1516693907.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:47.537Z,1516693907.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:47.942Z,1516693907.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:48.349Z,1516693908.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:48.746Z,1516693908.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:49.129Z,1516693909.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:49.529Z,1516693909.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:49.933Z,1516693909.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:50.326Z,1516693910.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:50.733Z,1516693910.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:51.133Z,1516693911.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:51.530Z,1516693911.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:51.929Z,1516693911.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:52.323Z,1516693912.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:52.731Z,1516693912.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:53.127Z,1516693913.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:53.522Z,1516693913.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:53.933Z,1516693913.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:54.330Z,1516693914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:54.733Z,1516693914.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:55.125Z,1516693915.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:55.524Z,1516693915.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:55.933Z,1516693915.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:56.330Z,1516693916.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:56.729Z,1516693916.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:56.729Z,1516693916.729 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-01-23T07:51:56.729Z,1516693916.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:51:56.731Z,1516693916.731 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:56.732Z,1516693916.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-01-23T07:51:56.732Z,1516693916.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:51:56.733Z,1516693916.733 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:56.733Z,1516693916.733 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92 2018-01-23T07:51:56.733Z,1516693916.733 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:51:56.758Z,1516693916.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:51:56.758Z,1516693916.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:51:56.758Z,1516693916.758 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:51:57.148Z,1516693917.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:51:57.148Z,1516693917.148 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-01-23T07:51:57.148Z,1516693917.148 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:51:57.148Z,1516693917.148 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-01-23T07:51:57.149Z,1516693917.149 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:51:57.149Z,1516693917.149 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92 2018-01-23T07:51:57.524Z,1516693917.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:51:57.524Z,1516693917.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:51:57.524Z,1516693917.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:51:57.525Z,1516693917.525 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:51:57.525Z,1516693917.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:51:57.525Z,1516693917.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:51:57.526Z,1516693917.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:51:57.526Z,1516693917.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:51:57.527Z,1516693917.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:51:57.941Z,1516693917.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:51:57.941Z,1516693917.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:58.337Z,1516693918.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:51:58.338Z,1516693918.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:58.733Z,1516693918.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:51:58.734Z,1516693918.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:59.128Z,1516693919.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:51:59.129Z,1516693919.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:59.528Z,1516693919.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:51:59.529Z,1516693919.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:51:59.934Z,1516693919.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:51:59.935Z,1516693919.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:00.342Z,1516693920.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:52:00.347Z,1516693920.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:00.737Z,1516693920.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:52:00.739Z,1516693920.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:01.123Z,1516693921.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:52:01.124Z,1516693921.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:01.537Z,1516693921.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:52:01.538Z,1516693921.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:04.628Z,1516693924.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T07:52:04.629Z,1516693924.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:04.780Z,1516693924.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T07:52:04.781Z,1516693924.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:05.114Z,1516693925.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:52:05.131Z,1516693925.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:05.500Z,1516693925.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:52:05.501Z,1516693925.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:05.899Z,1516693925.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:52:05.900Z,1516693925.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:06.297Z,1516693926.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:52:06.298Z,1516693926.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:06.705Z,1516693926.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:52:06.706Z,1516693926.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:07.116Z,1516693927.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:52:07.117Z,1516693927.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:07.512Z,1516693927.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:52:07.513Z,1516693927.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:07.906Z,1516693927.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:52:07.907Z,1516693927.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:08.297Z,1516693928.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:52:08.298Z,1516693928.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:08.706Z,1516693928.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:52:08.707Z,1516693928.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:09.104Z,1516693929.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:52:09.105Z,1516693929.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:09.500Z,1516693929.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:52:09.500Z,1516693929.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:09.905Z,1516693929.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:52:09.906Z,1516693929.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:10.306Z,1516693930.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:52:10.307Z,1516693930.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:10.708Z,1516693930.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:52:10.709Z,1516693930.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:11.105Z,1516693931.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:52:11.106Z,1516693931.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:11.506Z,1516693931.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:52:11.507Z,1516693931.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:11.903Z,1516693931.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:52:11.904Z,1516693931.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:12.303Z,1516693932.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:52:12.304Z,1516693932.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:12.706Z,1516693932.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:52:12.707Z,1516693932.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:13.106Z,1516693933.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:52:13.107Z,1516693933.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:13.508Z,1516693933.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:52:13.509Z,1516693933.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:13.920Z,1516693933.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:52:13.921Z,1516693933.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:14.297Z,1516693934.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:52:14.298Z,1516693934.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:14.700Z,1516693934.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:52:14.701Z,1516693934.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:15.106Z,1516693935.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:52:15.107Z,1516693935.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:15.497Z,1516693935.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:52:15.498Z,1516693935.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:15.903Z,1516693935.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:52:15.904Z,1516693935.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:16.320Z,1516693936.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:52:16.321Z,1516693936.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:16.707Z,1516693936.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:52:16.708Z,1516693936.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:17.108Z,1516693937.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:17.507Z,1516693937.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:17.901Z,1516693937.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:18.303Z,1516693938.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:18.710Z,1516693938.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:19.107Z,1516693939.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:19.514Z,1516693939.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:19.912Z,1516693939.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:20.293Z,1516693940.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:20.707Z,1516693940.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:21.111Z,1516693941.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:21.486Z,1516693941.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:21.909Z,1516693941.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:22.320Z,1516693942.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:22.717Z,1516693942.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:23.110Z,1516693943.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:23.495Z,1516693943.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:23.893Z,1516693943.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:24.300Z,1516693944.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:24.697Z,1516693944.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:25.106Z,1516693945.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:25.510Z,1516693945.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:25.902Z,1516693945.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:26.294Z,1516693946.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:26.694Z,1516693946.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:27.092Z,1516693947.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:27.497Z,1516693947.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:27.898Z,1516693947.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:28.306Z,1516693948.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:28.705Z,1516693948.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:29.105Z,1516693949.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:29.500Z,1516693949.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:29.899Z,1516693949.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:30.297Z,1516693950.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:30.708Z,1516693950.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:31.105Z,1516693951.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:31.509Z,1516693951.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:31.906Z,1516693951.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:32.299Z,1516693952.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:32.709Z,1516693952.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:33.101Z,1516693953.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:33.498Z,1516693953.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:33.905Z,1516693953.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:34.309Z,1516693954.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:34.713Z,1516693954.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:35.108Z,1516693955.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:35.509Z,1516693955.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:35.901Z,1516693955.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:36.306Z,1516693956.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:36.710Z,1516693956.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:37.108Z,1516693957.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:37.514Z,1516693957.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:37.910Z,1516693957.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:38.304Z,1516693958.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:38.710Z,1516693958.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:39.109Z,1516693959.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:39.509Z,1516693959.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:39.913Z,1516693959.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:40.316Z,1516693960.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:40.722Z,1516693960.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:41.113Z,1516693961.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:41.509Z,1516693961.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:41.893Z,1516693961.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:42.296Z,1516693962.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:42.696Z,1516693962.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:43.126Z,1516693963.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:43.506Z,1516693963.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:43.904Z,1516693963.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:44.300Z,1516693964.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:44.695Z,1516693964.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:45.096Z,1516693965.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:45.497Z,1516693965.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:45.901Z,1516693965.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:46.301Z,1516693966.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:46.706Z,1516693966.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:47.101Z,1516693967.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:47.495Z,1516693967.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:47.895Z,1516693967.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:48.297Z,1516693968.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:48.695Z,1516693968.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:49.105Z,1516693969.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:49.506Z,1516693969.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:49.901Z,1516693969.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:50.295Z,1516693970.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:50.695Z,1516693970.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:51.096Z,1516693971.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:51.497Z,1516693971.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:51.900Z,1516693971.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:52.309Z,1516693972.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:52.706Z,1516693972.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:53.102Z,1516693973.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:53.499Z,1516693973.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:53.901Z,1516693973.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:54.297Z,1516693974.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:54.696Z,1516693974.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:55.105Z,1516693975.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:55.506Z,1516693975.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:55.901Z,1516693975.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:56.299Z,1516693976.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:56.698Z,1516693976.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:57.095Z,1516693977.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:57.505Z,1516693977.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:57.895Z,1516693977.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:58.301Z,1516693978.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:58.706Z,1516693978.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:59.102Z,1516693979.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:59.495Z,1516693979.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:52:59.895Z,1516693979.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:00.297Z,1516693980.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:00.695Z,1516693980.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:01.105Z,1516693981.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:01.530Z,1516693981.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:01.902Z,1516693981.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:05.001Z,1516693985.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:05.138Z,1516693985.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:05.494Z,1516693985.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:05.902Z,1516693985.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:06.299Z,1516693986.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:06.697Z,1516693986.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:07.100Z,1516693987.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:07.531Z,1516693987.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:07.897Z,1516693987.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:08.309Z,1516693988.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:08.709Z,1516693988.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:09.109Z,1516693989.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:09.491Z,1516693989.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:09.895Z,1516693989.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:10.289Z,1516693990.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:10.691Z,1516693990.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:11.095Z,1516693991.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:11.501Z,1516693991.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:11.906Z,1516693991.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:12.291Z,1516693992.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:12.693Z,1516693992.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:13.091Z,1516693993.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:13.492Z,1516693993.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:13.895Z,1516693993.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:14.304Z,1516693994.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:14.707Z,1516693994.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:15.109Z,1516693995.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:15.501Z,1516693995.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:15.877Z,1516693995.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:16.278Z,1516693996.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:16.685Z,1516693996.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:17.111Z,1516693997.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:17.515Z,1516693997.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:17.915Z,1516693997.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:18.289Z,1516693998.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:18.683Z,1516693998.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:19.084Z,1516693999.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:19.485Z,1516693999.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:19.885Z,1516693999.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:20.286Z,1516694000.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:20.697Z,1516694000.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:21.091Z,1516694001.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:21.484Z,1516694001.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:21.885Z,1516694001.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:22.286Z,1516694002.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:22.684Z,1516694002.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:23.089Z,1516694003.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:23.490Z,1516694003.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:23.897Z,1516694003.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:24.283Z,1516694004.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:24.686Z,1516694004.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:25.084Z,1516694005.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:25.486Z,1516694005.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:25.892Z,1516694005.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:26.304Z,1516694006.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:26.701Z,1516694006.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:27.101Z,1516694007.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:27.491Z,1516694007.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:27.893Z,1516694007.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:28.288Z,1516694008.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:28.688Z,1516694008.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:29.097Z,1516694009.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:29.497Z,1516694009.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:29.894Z,1516694009.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:30.292Z,1516694010.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:30.686Z,1516694010.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:31.097Z,1516694011.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:31.505Z,1516694011.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:31.905Z,1516694011.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:32.286Z,1516694012.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:32.690Z,1516694012.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:33.091Z,1516694013.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:33.487Z,1516694013.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:33.892Z,1516694013.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:34.295Z,1516694014.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:34.698Z,1516694014.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:35.094Z,1516694015.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:35.491Z,1516694015.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:35.886Z,1516694015.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:36.291Z,1516694016.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:36.685Z,1516694016.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:37.094Z,1516694017.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:37.497Z,1516694017.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:37.894Z,1516694017.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:38.295Z,1516694018.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:38.688Z,1516694018.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:39.095Z,1516694019.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:39.498Z,1516694019.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:39.901Z,1516694019.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:40.291Z,1516694020.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:40.685Z,1516694020.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:41.101Z,1516694021.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:41.497Z,1516694021.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:41.894Z,1516694021.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:42.288Z,1516694022.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:42.691Z,1516694022.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:43.095Z,1516694023.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:43.497Z,1516694023.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:43.901Z,1516694023.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:44.288Z,1516694024.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:44.697Z,1516694024.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:45.094Z,1516694025.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:45.498Z,1516694025.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:45.897Z,1516694025.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:46.296Z,1516694026.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:46.692Z,1516694026.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:47.105Z,1516694027.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:47.505Z,1516694027.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:47.908Z,1516694027.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:48.288Z,1516694028.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:48.691Z,1516694028.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:49.101Z,1516694029.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:49.505Z,1516694029.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:49.905Z,1516694029.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:50.287Z,1516694030.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:50.694Z,1516694030.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:51.109Z,1516694031.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:51.502Z,1516694031.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:51.897Z,1516694031.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:52.292Z,1516694032.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:52.693Z,1516694032.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:53.097Z,1516694033.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:53.501Z,1516694033.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:53.900Z,1516694033.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:54.295Z,1516694034.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:54.697Z,1516694034.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:55.099Z,1516694035.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:55.499Z,1516694035.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:55.901Z,1516694035.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:56.295Z,1516694036.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:56.704Z,1516694036.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:57.099Z,1516694037.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:57.513Z,1516694037.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:57.909Z,1516694037.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:58.291Z,1516694038.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:58.698Z,1516694038.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:59.108Z,1516694039.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:59.500Z,1516694039.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:53:59.904Z,1516694039.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:00.282Z,1516694040.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:00.690Z,1516694040.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:01.078Z,1516694041.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:01.508Z,1516694041.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:01.907Z,1516694041.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:02.306Z,1516694042.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:05.378Z,1516694045.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:05.517Z,1516694045.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:05.876Z,1516694045.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:06.278Z,1516694046.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:06.678Z,1516694046.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:07.100Z,1516694047.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:07.467Z,1516694047.467 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T07:54:07.485Z,1516694047.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:07.885Z,1516694047.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:08.293Z,1516694048.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:08.688Z,1516694048.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:09.084Z,1516694049.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:09.476Z,1516694049.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:09.874Z,1516694049.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:10.293Z,1516694050.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:10.674Z,1516694050.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T07:54:10.715Z,1516694050.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:11.083Z,1516694051.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:11.484Z,1516694051.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:11.888Z,1516694051.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:12.288Z,1516694052.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:12.682Z,1516694052.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:13.073Z,1516694053.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:13.492Z,1516694053.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:13.877Z,1516694053.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:14.289Z,1516694054.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:14.687Z,1516694054.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:15.112Z,1516694055.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:15.478Z,1516694055.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:15.877Z,1516694055.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:16.278Z,1516694056.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:16.697Z,1516694056.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:17.079Z,1516694057.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:17.493Z,1516694057.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:17.888Z,1516694057.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:17.909Z,1516694057.909 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T07:54:18.312Z,1516694058.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:18.683Z,1516694058.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:19.084Z,1516694059.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:19.480Z,1516694059.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:19.897Z,1516694059.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:20.289Z,1516694060.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:20.691Z,1516694060.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:21.092Z,1516694061.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:21.498Z,1516694061.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:21.876Z,1516694061.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:22.281Z,1516694062.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:22.680Z,1516694062.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:23.097Z,1516694063.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:23.489Z,1516694063.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:23.891Z,1516694063.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:24.288Z,1516694064.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:24.695Z,1516694064.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:25.082Z,1516694065.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:25.481Z,1516694065.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:25.880Z,1516694065.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:26.313Z,1516694066.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:26.689Z,1516694066.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:27.086Z,1516694067.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:27.485Z,1516694067.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:27.874Z,1516694067.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:28.281Z,1516694068.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:28.668Z,1516694068.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:29.098Z,1516694069.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:29.488Z,1516694069.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:29.890Z,1516694069.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:30.296Z,1516694070.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:30.669Z,1516694070.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:31.093Z,1516694071.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:31.476Z,1516694071.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:31.877Z,1516694071.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:32.298Z,1516694072.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:32.698Z,1516694072.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:33.078Z,1516694073.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:33.474Z,1516694073.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:33.872Z,1516694073.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:34.273Z,1516694074.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:34.677Z,1516694074.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:35.074Z,1516694075.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:35.488Z,1516694075.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:35.889Z,1516694075.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:36.283Z,1516694076.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:36.673Z,1516694076.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:37.072Z,1516694077.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:37.473Z,1516694077.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:37.884Z,1516694077.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:38.285Z,1516694078.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:38.689Z,1516694078.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:39.082Z,1516694079.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:39.474Z,1516694079.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:39.877Z,1516694079.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:40.273Z,1516694080.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:40.686Z,1516694080.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:41.074Z,1516694081.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:41.483Z,1516694081.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:41.886Z,1516694081.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:42.291Z,1516694082.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:42.681Z,1516694082.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:43.079Z,1516694083.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:43.481Z,1516694083.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:43.885Z,1516694083.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:44.283Z,1516694084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:44.686Z,1516694084.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:45.082Z,1516694085.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:45.485Z,1516694085.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:45.883Z,1516694085.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:46.279Z,1516694086.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:46.679Z,1516694086.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:47.082Z,1516694087.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:47.482Z,1516694087.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:47.885Z,1516694087.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:48.292Z,1516694088.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:48.681Z,1516694088.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:49.079Z,1516694089.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:49.483Z,1516694089.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:49.879Z,1516694089.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:50.283Z,1516694090.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:50.686Z,1516694090.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:51.089Z,1516694091.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:51.481Z,1516694091.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:51.882Z,1516694091.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:52.276Z,1516694092.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:52.679Z,1516694092.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:53.082Z,1516694093.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:53.489Z,1516694093.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:53.885Z,1516694093.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:54.292Z,1516694094.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:54.681Z,1516694094.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:55.085Z,1516694095.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:55.485Z,1516694095.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:55.883Z,1516694095.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:56.291Z,1516694096.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:56.697Z,1516694096.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.091Z,1516694097.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.483Z,1516694097.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.884Z,1516694097.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.885Z,1516694097.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-01-23T07:54:57.885Z,1516694097.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:54:57.886Z,1516694097.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.887Z,1516694097.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-01-23T07:54:57.887Z,1516694097.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:54:57.888Z,1516694097.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:57.889Z,1516694097.889 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93 2018-01-23T07:54:57.889Z,1516694097.889 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:54:57.900Z,1516694097.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:54:57.900Z,1516694097.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:54:57.901Z,1516694097.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:54:58.294Z,1516694098.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:54:58.294Z,1516694098.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-01-23T07:54:58.294Z,1516694098.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:54:58.294Z,1516694098.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-01-23T07:54:58.295Z,1516694098.295 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:54:58.295Z,1516694098.295 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93 2018-01-23T07:54:58.682Z,1516694098.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:54:58.683Z,1516694098.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:54:58.683Z,1516694098.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:54:58.683Z,1516694098.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:54:58.684Z,1516694098.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:54:58.684Z,1516694098.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:54:58.685Z,1516694098.685 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:54:58.685Z,1516694098.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:54:58.685Z,1516694098.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:54:59.092Z,1516694099.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:54:59.092Z,1516694099.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:59.484Z,1516694099.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:54:59.485Z,1516694099.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:54:59.895Z,1516694099.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:54:59.896Z,1516694099.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:00.288Z,1516694100.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:55:00.289Z,1516694100.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:00.661Z,1516694100.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:55:00.661Z,1516694100.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:01.068Z,1516694101.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:55:01.069Z,1516694101.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:01.471Z,1516694101.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:55:01.472Z,1516694101.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:01.861Z,1516694101.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:55:01.862Z,1516694101.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:02.300Z,1516694102.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:55:02.301Z,1516694102.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:02.693Z,1516694102.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:55:02.694Z,1516694102.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:05.795Z,1516694105.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T07:55:05.796Z,1516694105.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:05.925Z,1516694105.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:55:05.941Z,1516694105.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:06.268Z,1516694106.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:55:06.269Z,1516694106.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:06.670Z,1516694106.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:55:06.672Z,1516694106.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:07.063Z,1516694107.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:55:07.064Z,1516694107.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:07.470Z,1516694107.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:55:07.471Z,1516694107.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:07.870Z,1516694107.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:55:07.871Z,1516694107.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:08.296Z,1516694108.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:55:08.297Z,1516694108.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:08.676Z,1516694108.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:55:08.677Z,1516694108.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:09.070Z,1516694109.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:55:09.071Z,1516694109.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:09.468Z,1516694109.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:55:09.469Z,1516694109.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:09.870Z,1516694109.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:55:09.875Z,1516694109.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:10.280Z,1516694110.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:55:10.281Z,1516694110.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:10.678Z,1516694110.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:55:10.679Z,1516694110.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:11.078Z,1516694111.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:55:11.083Z,1516694111.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:11.477Z,1516694111.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:55:11.477Z,1516694111.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:11.871Z,1516694111.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:55:11.872Z,1516694111.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:12.273Z,1516694112.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:55:12.274Z,1516694112.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:12.681Z,1516694112.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:55:12.682Z,1516694112.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:13.081Z,1516694113.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:55:13.082Z,1516694113.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:13.485Z,1516694113.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:55:13.486Z,1516694113.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:13.892Z,1516694113.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:55:13.893Z,1516694113.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:14.285Z,1516694114.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:55:14.286Z,1516694114.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:14.681Z,1516694114.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:55:14.682Z,1516694114.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:15.084Z,1516694115.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:55:15.085Z,1516694115.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:15.464Z,1516694115.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:55:15.465Z,1516694115.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:15.860Z,1516694115.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:55:15.861Z,1516694115.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:16.270Z,1516694116.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:55:16.272Z,1516694116.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:16.675Z,1516694116.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:55:16.676Z,1516694116.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:17.070Z,1516694117.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:55:17.071Z,1516694117.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:17.469Z,1516694117.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:55:17.470Z,1516694117.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:17.862Z,1516694117.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T07:55:17.863Z,1516694117.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:18.264Z,1516694118.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:18.666Z,1516694118.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:19.064Z,1516694119.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:19.469Z,1516694119.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:19.870Z,1516694119.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:20.268Z,1516694120.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:20.665Z,1516694120.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:21.063Z,1516694121.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:21.464Z,1516694121.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:21.864Z,1516694121.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:22.273Z,1516694122.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:22.670Z,1516694122.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:23.077Z,1516694123.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:23.467Z,1516694123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:23.863Z,1516694123.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:24.272Z,1516694124.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:24.668Z,1516694124.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:25.069Z,1516694125.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:25.474Z,1516694125.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:25.873Z,1516694125.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:26.272Z,1516694126.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:26.664Z,1516694126.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:27.063Z,1516694127.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:27.464Z,1516694127.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:27.866Z,1516694127.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:28.285Z,1516694128.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:28.676Z,1516694128.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:29.074Z,1516694129.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:29.466Z,1516694129.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:29.863Z,1516694129.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:30.274Z,1516694130.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:30.684Z,1516694130.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:31.073Z,1516694131.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:31.469Z,1516694131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:31.875Z,1516694131.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:32.274Z,1516694132.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:32.677Z,1516694132.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:33.073Z,1516694133.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:33.463Z,1516694133.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:33.866Z,1516694133.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:34.273Z,1516694134.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:34.676Z,1516694134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:35.074Z,1516694135.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:35.467Z,1516694135.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:35.863Z,1516694135.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:36.273Z,1516694136.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:36.697Z,1516694136.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:37.084Z,1516694137.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:37.483Z,1516694137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:37.885Z,1516694137.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:38.308Z,1516694138.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:38.693Z,1516694138.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:39.101Z,1516694139.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:39.474Z,1516694139.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:39.873Z,1516694139.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:40.273Z,1516694140.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:40.690Z,1516694140.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:41.121Z,1516694141.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:41.478Z,1516694141.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:41.857Z,1516694141.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:42.306Z,1516694142.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:42.690Z,1516694142.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:43.097Z,1516694143.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:43.499Z,1516694143.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:43.893Z,1516694143.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:44.313Z,1516694144.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:44.698Z,1516694144.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:45.092Z,1516694145.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:45.485Z,1516694145.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:45.889Z,1516694145.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:46.331Z,1516694146.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:46.685Z,1516694146.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:47.104Z,1516694147.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:47.477Z,1516694147.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:47.894Z,1516694147.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:48.305Z,1516694148.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:48.709Z,1516694148.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:49.105Z,1516694149.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:49.481Z,1516694149.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:49.881Z,1516694149.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:50.285Z,1516694150.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:50.720Z,1516694150.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:51.101Z,1516694151.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:51.509Z,1516694151.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:51.913Z,1516694151.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:52.309Z,1516694152.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:52.697Z,1516694152.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:53.073Z,1516694153.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:53.463Z,1516694153.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:53.862Z,1516694153.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:54.266Z,1516694154.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:54.671Z,1516694154.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:55.066Z,1516694155.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:55.464Z,1516694155.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:55.862Z,1516694155.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:56.266Z,1516694156.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:56.672Z,1516694156.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:57.070Z,1516694157.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:57.456Z,1516694157.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:57.856Z,1516694157.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:58.270Z,1516694158.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:58.670Z,1516694158.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:59.068Z,1516694159.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:59.461Z,1516694159.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:55:59.856Z,1516694159.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:00.272Z,1516694160.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:00.670Z,1516694160.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:01.097Z,1516694161.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:01.463Z,1516694161.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:01.466Z,1516694161.466 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T07:56:01.467Z,1516694161.467 [Default:CheckIn:C.Wait] Stopped 2018-01-23T07:56:01.467Z,1516694161.467 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T07:56:01.467Z,1516694161.467 [Default:CheckIn:D] Running Loop=1 2018-01-23T07:56:01.857Z,1516694161.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:01.860Z,1516694161.860 [Default:CheckIn:D] Stopped 2018-01-23T07:56:01.860Z,1516694161.860 [Default:CheckIn:E] Running Loop=1 2018-01-23T07:56:02.274Z,1516694162.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:02.281Z,1516694162.281 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.163346 min 2018-01-23T07:56:02.281Z,1516694162.281 [Default:CheckIn:E] Stopped 2018-01-23T07:56:02.281Z,1516694162.281 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn] Stopped 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn](INFO): Running loop #28 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn] Running Loop=28 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T07:56:02.282Z,1516694162.282 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T07:56:02.682Z,1516694162.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:03.073Z,1516694163.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:06.158Z,1516694166.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:06.297Z,1516694166.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:06.626Z,1516694166.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:07.037Z,1516694167.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:07.426Z,1516694167.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:07.829Z,1516694167.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:08.224Z,1516694168.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:08.633Z,1516694168.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:09.032Z,1516694169.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:09.433Z,1516694169.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:09.837Z,1516694169.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:10.233Z,1516694170.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:10.624Z,1516694170.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:11.022Z,1516694171.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:11.423Z,1516694171.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:11.823Z,1516694171.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:12.222Z,1516694172.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:12.641Z,1516694172.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:13.037Z,1516694173.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:13.433Z,1516694173.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:13.825Z,1516694173.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:14.228Z,1516694174.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:14.628Z,1516694174.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:15.037Z,1516694175.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:15.456Z,1516694175.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:15.845Z,1516694175.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:16.245Z,1516694176.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:16.628Z,1516694176.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:17.026Z,1516694177.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:17.425Z,1516694177.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:17.828Z,1516694177.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:18.229Z,1516694178.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:18.637Z,1516694178.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:19.038Z,1516694179.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:19.434Z,1516694179.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:19.831Z,1516694179.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:20.235Z,1516694180.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:20.631Z,1516694180.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:21.035Z,1516694181.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:21.440Z,1516694181.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:21.849Z,1516694181.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:22.234Z,1516694182.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:22.633Z,1516694182.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:23.021Z,1516694183.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:23.432Z,1516694183.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:23.817Z,1516694183.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:24.216Z,1516694184.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:24.653Z,1516694184.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:25.046Z,1516694185.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:25.451Z,1516694185.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:25.827Z,1516694185.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:26.236Z,1516694186.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:26.627Z,1516694186.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:27.030Z,1516694187.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:27.427Z,1516694187.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:27.828Z,1516694187.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:28.227Z,1516694188.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:28.633Z,1516694188.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:29.024Z,1516694189.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:29.426Z,1516694189.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:29.824Z,1516694189.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:30.224Z,1516694190.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:30.626Z,1516694190.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:31.029Z,1516694191.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:31.426Z,1516694191.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:31.823Z,1516694191.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:32.224Z,1516694192.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:32.623Z,1516694192.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:33.032Z,1516694193.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:33.433Z,1516694193.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:33.834Z,1516694193.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:34.233Z,1516694194.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:34.624Z,1516694194.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:35.022Z,1516694195.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:35.433Z,1516694195.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:35.825Z,1516694195.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:36.222Z,1516694196.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:36.641Z,1516694196.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:37.036Z,1516694197.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:37.434Z,1516694197.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:37.832Z,1516694197.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:38.228Z,1516694198.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:38.628Z,1516694198.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:39.037Z,1516694199.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:39.437Z,1516694199.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:39.841Z,1516694199.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:40.234Z,1516694200.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:40.640Z,1516694200.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:41.029Z,1516694201.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:41.431Z,1516694201.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:41.827Z,1516694201.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:42.233Z,1516694202.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:42.634Z,1516694202.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:43.044Z,1516694203.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:43.435Z,1516694203.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:43.831Z,1516694203.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:44.234Z,1516694204.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:44.632Z,1516694204.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:45.031Z,1516694205.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:45.435Z,1516694205.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:45.838Z,1516694205.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:46.234Z,1516694206.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:46.636Z,1516694206.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:47.021Z,1516694207.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:47.435Z,1516694207.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:47.836Z,1516694207.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:48.213Z,1516694208.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:48.645Z,1516694208.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:49.048Z,1516694209.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:49.441Z,1516694209.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:49.837Z,1516694209.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:50.247Z,1516694210.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:50.620Z,1516694210.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:51.023Z,1516694211.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:51.457Z,1516694211.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:51.830Z,1516694211.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:52.254Z,1516694212.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:52.633Z,1516694212.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:53.023Z,1516694213.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:53.422Z,1516694213.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:53.827Z,1516694213.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:54.224Z,1516694214.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:54.633Z,1516694214.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:55.034Z,1516694215.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:55.433Z,1516694215.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:55.823Z,1516694215.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:56.225Z,1516694216.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:56.625Z,1516694216.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:57.025Z,1516694217.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:57.430Z,1516694217.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:57.830Z,1516694217.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:58.242Z,1516694218.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:58.633Z,1516694218.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:59.033Z,1516694219.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:59.423Z,1516694219.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:56:59.832Z,1516694219.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:00.229Z,1516694220.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:00.637Z,1516694220.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:01.038Z,1516694221.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:01.437Z,1516694221.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:01.829Z,1516694221.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:02.227Z,1516694222.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:02.627Z,1516694222.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:03.037Z,1516694223.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:03.445Z,1516694223.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:06.523Z,1516694226.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:06.664Z,1516694226.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:06.997Z,1516694226.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:07.388Z,1516694227.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:07.788Z,1516694227.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:08.193Z,1516694228.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:08.606Z,1516694228.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:08.997Z,1516694228.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:09.394Z,1516694229.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:09.790Z,1516694229.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:10.196Z,1516694230.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:10.593Z,1516694230.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:10.988Z,1516694230.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:11.396Z,1516694231.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:11.823Z,1516694231.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:12.201Z,1516694232.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:12.593Z,1516694232.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:12.991Z,1516694232.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:13.406Z,1516694233.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:13.806Z,1516694233.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:14.201Z,1516694234.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:14.591Z,1516694234.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:14.989Z,1516694234.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:15.427Z,1516694235.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:15.797Z,1516694235.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:16.199Z,1516694236.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:16.591Z,1516694236.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:16.996Z,1516694236.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:17.398Z,1516694237.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:17.800Z,1516694237.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:18.197Z,1516694238.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:18.601Z,1516694238.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:18.995Z,1516694238.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:19.401Z,1516694239.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:19.797Z,1516694239.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:20.198Z,1516694240.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:20.596Z,1516694240.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:20.993Z,1516694240.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:21.399Z,1516694241.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:21.797Z,1516694241.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:22.201Z,1516694242.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:22.598Z,1516694242.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:22.992Z,1516694242.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:23.401Z,1516694243.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:23.802Z,1516694243.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:24.205Z,1516694244.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:24.593Z,1516694244.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:24.992Z,1516694244.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:25.403Z,1516694245.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:25.804Z,1516694245.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:26.213Z,1516694246.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:26.600Z,1516694246.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:26.993Z,1516694246.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:27.406Z,1516694247.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:27.809Z,1516694247.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:28.210Z,1516694248.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:28.600Z,1516694248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:29.001Z,1516694249.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:29.425Z,1516694249.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:29.797Z,1516694249.797 [PNI_TCM](ERROR): CRC does not match. Expected:0x46984 got:0x218 2018-01-23T07:57:29.825Z,1516694249.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:30.212Z,1516694250.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:30.606Z,1516694250.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:31.001Z,1516694251.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:31.375Z,1516694251.375 [PNI_TCM](ERROR): CRC does not match. Expected:0x43729 got:0x33968 2018-01-23T07:57:31.401Z,1516694251.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:31.803Z,1516694251.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:32.212Z,1516694252.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:32.618Z,1516694252.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:33.014Z,1516694253.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:33.413Z,1516694253.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:33.811Z,1516694253.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:34.200Z,1516694254.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:34.582Z,1516694254.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:35.017Z,1516694255.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:35.404Z,1516694255.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:35.817Z,1516694255.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:36.217Z,1516694256.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:36.603Z,1516694256.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:37.009Z,1516694257.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:37.387Z,1516694257.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T07:57:37.409Z,1516694257.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:37.785Z,1516694257.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x40940 got:0x0 2018-01-23T07:57:37.813Z,1516694257.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:38.194Z,1516694258.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:38.624Z,1516694258.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:38.994Z,1516694258.994 [PNI_TCM](ERROR): CRC does not match. Expected:0x37868 got:0x6210 2018-01-23T07:57:39.021Z,1516694259.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:39.417Z,1516694259.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:39.797Z,1516694259.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:40.212Z,1516694260.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:40.598Z,1516694260.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:40.998Z,1516694260.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:41.393Z,1516694261.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:41.824Z,1516694261.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:42.199Z,1516694262.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:42.598Z,1516694262.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:42.992Z,1516694262.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:43.418Z,1516694263.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:43.792Z,1516694263.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:44.193Z,1516694264.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:44.597Z,1516694264.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:45.019Z,1516694265.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:45.425Z,1516694265.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:45.802Z,1516694265.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:46.184Z,1516694266.184 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T07:57:46.225Z,1516694266.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:46.608Z,1516694266.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:46.989Z,1516694266.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:47.392Z,1516694267.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:47.801Z,1516694267.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:48.227Z,1516694268.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:48.605Z,1516694268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:48.996Z,1516694268.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:49.393Z,1516694269.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:49.793Z,1516694269.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:50.189Z,1516694270.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:50.605Z,1516694270.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:51.005Z,1516694271.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:51.426Z,1516694271.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:51.792Z,1516694271.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:52.194Z,1516694272.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:52.595Z,1516694272.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:52.989Z,1516694272.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:53.393Z,1516694273.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:53.806Z,1516694273.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:54.204Z,1516694274.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:54.627Z,1516694274.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:55.001Z,1516694275.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:55.389Z,1516694275.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:55.793Z,1516694275.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:56.190Z,1516694276.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:56.605Z,1516694276.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:57.004Z,1516694277.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:57.405Z,1516694277.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:57.789Z,1516694277.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.190Z,1516694278.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.590Z,1516694278.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.989Z,1516694278.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.989Z,1516694278.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-01-23T07:57:58.989Z,1516694278.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T07:57:58.991Z,1516694278.991 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.991Z,1516694278.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-01-23T07:57:58.991Z,1516694278.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T07:57:58.994Z,1516694278.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:57:58.994Z,1516694278.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94 2018-01-23T07:57:58.995Z,1516694278.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T07:57:59.009Z,1516694279.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T07:57:59.009Z,1516694279.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T07:57:59.010Z,1516694279.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T07:57:59.402Z,1516694279.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T07:57:59.402Z,1516694279.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-01-23T07:57:59.403Z,1516694279.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T07:57:59.403Z,1516694279.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-01-23T07:57:59.403Z,1516694279.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T07:57:59.403Z,1516694279.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94 2018-01-23T07:57:59.801Z,1516694279.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T07:57:59.801Z,1516694279.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:57:59.801Z,1516694279.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:57:59.802Z,1516694279.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T07:57:59.802Z,1516694279.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:57:59.803Z,1516694279.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:57:59.803Z,1516694279.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T07:57:59.804Z,1516694279.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T07:57:59.804Z,1516694279.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T07:58:00.229Z,1516694280.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T07:58:00.230Z,1516694280.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:00.620Z,1516694280.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T07:58:00.621Z,1516694280.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:00.991Z,1516694280.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T07:58:00.992Z,1516694280.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:01.394Z,1516694281.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T07:58:01.395Z,1516694281.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:01.795Z,1516694281.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T07:58:01.796Z,1516694281.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:02.201Z,1516694282.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T07:58:02.203Z,1516694282.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:02.602Z,1516694282.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T07:58:02.603Z,1516694282.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:03.002Z,1516694283.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T07:58:03.003Z,1516694283.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:03.402Z,1516694283.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T07:58:03.403Z,1516694283.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:03.796Z,1516694283.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T07:58:03.797Z,1516694283.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:06.896Z,1516694286.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T07:58:06.897Z,1516694286.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:07.035Z,1516694287.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T07:58:07.036Z,1516694287.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:07.389Z,1516694287.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T07:58:07.390Z,1516694287.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:07.795Z,1516694287.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T07:58:07.796Z,1516694287.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:08.195Z,1516694288.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T07:58:08.196Z,1516694288.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:08.569Z,1516694288.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T07:58:08.570Z,1516694288.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:08.975Z,1516694288.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T07:58:08.976Z,1516694288.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:09.372Z,1516694289.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T07:58:09.373Z,1516694289.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:09.773Z,1516694289.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T07:58:09.774Z,1516694289.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:10.174Z,1516694290.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T07:58:10.175Z,1516694290.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:10.575Z,1516694290.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T07:58:10.576Z,1516694290.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:10.972Z,1516694290.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T07:58:10.973Z,1516694290.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:11.369Z,1516694291.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T07:58:11.370Z,1516694291.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:11.766Z,1516694291.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T07:58:11.768Z,1516694291.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:12.175Z,1516694292.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T07:58:12.176Z,1516694292.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:12.575Z,1516694292.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T07:58:12.576Z,1516694292.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:12.977Z,1516694292.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T07:58:12.978Z,1516694292.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:13.384Z,1516694293.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T07:58:13.385Z,1516694293.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:13.776Z,1516694293.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T07:58:13.777Z,1516694293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:14.172Z,1516694294.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T07:58:14.173Z,1516694294.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:14.576Z,1516694294.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T07:58:14.577Z,1516694294.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:14.974Z,1516694294.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T07:58:14.975Z,1516694294.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:15.373Z,1516694295.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T07:58:15.374Z,1516694295.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:15.792Z,1516694295.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T07:58:15.793Z,1516694295.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:16.181Z,1516694296.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T07:58:16.182Z,1516694296.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:16.577Z,1516694296.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T07:58:16.578Z,1516694296.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:16.980Z,1516694296.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T07:58:16.981Z,1516694296.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:17.377Z,1516694297.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T07:58:17.378Z,1516694297.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:17.757Z,1516694297.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T07:58:17.758Z,1516694297.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:18.164Z,1516694298.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T07:58:18.165Z,1516694298.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:18.590Z,1516694298.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T07:58:18.591Z,1516694298.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:18.993Z,1516694298.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:19.389Z,1516694299.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:19.768Z,1516694299.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:20.161Z,1516694300.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:20.570Z,1516694300.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:20.964Z,1516694300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:21.362Z,1516694301.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:21.773Z,1516694301.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:22.169Z,1516694302.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:22.569Z,1516694302.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:22.969Z,1516694302.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:23.364Z,1516694303.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:23.773Z,1516694303.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:24.163Z,1516694304.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:24.573Z,1516694304.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:24.977Z,1516694304.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:25.373Z,1516694305.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:25.764Z,1516694305.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:26.173Z,1516694306.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:26.569Z,1516694306.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:26.964Z,1516694306.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:27.373Z,1516694307.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:27.773Z,1516694307.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:28.173Z,1516694308.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:28.573Z,1516694308.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:28.963Z,1516694308.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:29.364Z,1516694309.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:29.773Z,1516694309.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:30.163Z,1516694310.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:30.580Z,1516694310.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:30.975Z,1516694310.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:31.376Z,1516694311.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:31.768Z,1516694311.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:32.173Z,1516694312.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:32.570Z,1516694312.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:32.964Z,1516694312.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:33.363Z,1516694313.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:33.774Z,1516694313.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:34.173Z,1516694314.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:34.581Z,1516694314.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:34.963Z,1516694314.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:35.364Z,1516694315.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:35.769Z,1516694315.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:36.163Z,1516694316.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:36.580Z,1516694316.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:36.975Z,1516694316.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:37.374Z,1516694317.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:37.768Z,1516694317.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:38.164Z,1516694318.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:38.569Z,1516694318.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:38.964Z,1516694318.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:39.363Z,1516694319.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:39.785Z,1516694319.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:40.176Z,1516694320.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:40.574Z,1516694320.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:40.965Z,1516694320.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:41.373Z,1516694321.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:41.769Z,1516694321.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:42.165Z,1516694322.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:42.580Z,1516694322.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:42.979Z,1516694322.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:43.373Z,1516694323.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:43.765Z,1516694323.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:44.166Z,1516694324.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:44.574Z,1516694324.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:44.980Z,1516694324.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:45.385Z,1516694325.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:45.769Z,1516694325.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:46.173Z,1516694326.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:46.585Z,1516694326.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:46.981Z,1516694326.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:47.378Z,1516694327.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:47.769Z,1516694327.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:48.176Z,1516694328.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:48.580Z,1516694328.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:48.978Z,1516694328.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:49.374Z,1516694329.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:49.766Z,1516694329.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:50.166Z,1516694330.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:50.585Z,1516694330.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:50.982Z,1516694330.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:51.385Z,1516694331.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:51.770Z,1516694331.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:52.169Z,1516694332.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:52.577Z,1516694332.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:52.985Z,1516694332.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:53.383Z,1516694333.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:53.769Z,1516694333.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:54.178Z,1516694334.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:54.582Z,1516694334.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:54.978Z,1516694334.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:55.381Z,1516694335.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:55.770Z,1516694335.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:56.171Z,1516694336.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:56.580Z,1516694336.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:56.990Z,1516694336.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:57.378Z,1516694337.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:57.768Z,1516694337.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:58.182Z,1516694338.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:58.581Z,1516694338.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:58.980Z,1516694338.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:59.375Z,1516694339.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:58:59.773Z,1516694339.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:00.172Z,1516694340.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:00.579Z,1516694340.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:00.978Z,1516694340.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:01.377Z,1516694341.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:01.773Z,1516694341.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:02.161Z,1516694342.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:02.585Z,1516694342.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:02.979Z,1516694342.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:03.384Z,1516694343.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:03.775Z,1516694343.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:04.177Z,1516694344.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:07.276Z,1516694347.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:07.421Z,1516694347.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:07.742Z,1516694347.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:08.140Z,1516694348.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:08.540Z,1516694348.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:08.940Z,1516694348.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:09.339Z,1516694349.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:09.754Z,1516694349.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:10.150Z,1516694350.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:10.545Z,1516694350.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:10.949Z,1516694350.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:11.345Z,1516694351.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:11.750Z,1516694351.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:12.141Z,1516694352.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:12.538Z,1516694352.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:12.953Z,1516694352.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:13.346Z,1516694353.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:13.749Z,1516694353.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:14.142Z,1516694354.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:14.542Z,1516694354.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:14.948Z,1516694354.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:15.344Z,1516694355.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:15.753Z,1516694355.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:16.153Z,1516694356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:16.550Z,1516694356.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:16.949Z,1516694356.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:17.341Z,1516694357.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:17.750Z,1516694357.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:18.144Z,1516694358.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:18.538Z,1516694358.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:18.951Z,1516694358.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:19.353Z,1516694359.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:19.750Z,1516694359.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:20.152Z,1516694360.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:20.549Z,1516694360.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:20.949Z,1516694360.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:21.331Z,1516694361.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:21.758Z,1516694361.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:22.165Z,1516694362.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:22.561Z,1516694362.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:22.965Z,1516694362.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:23.345Z,1516694363.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:23.744Z,1516694363.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:24.138Z,1516694364.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:24.544Z,1516694364.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:24.970Z,1516694364.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:25.369Z,1516694365.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:25.742Z,1516694365.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:26.150Z,1516694366.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:26.548Z,1516694366.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:26.953Z,1516694366.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:27.348Z,1516694367.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:27.753Z,1516694367.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:28.163Z,1516694368.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:28.556Z,1516694368.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:28.952Z,1516694368.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:29.349Z,1516694369.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:29.732Z,1516694369.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:30.133Z,1516694370.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:30.540Z,1516694370.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:30.963Z,1516694370.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:31.350Z,1516694371.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:31.771Z,1516694371.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:32.142Z,1516694372.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:32.543Z,1516694372.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:32.943Z,1516694372.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:33.342Z,1516694373.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:33.751Z,1516694373.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:34.149Z,1516694374.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:34.551Z,1516694374.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:34.939Z,1516694374.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:35.353Z,1516694375.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:35.744Z,1516694375.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:36.140Z,1516694376.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:36.542Z,1516694376.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:36.951Z,1516694376.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:37.365Z,1516694377.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:37.761Z,1516694377.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:38.143Z,1516694378.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:38.553Z,1516694378.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:38.949Z,1516694378.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:39.346Z,1516694379.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:39.761Z,1516694379.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:40.165Z,1516694380.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:40.562Z,1516694380.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:40.929Z,1516694380.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:41.357Z,1516694381.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:41.730Z,1516694381.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:42.137Z,1516694382.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:42.566Z,1516694382.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:42.963Z,1516694382.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:43.342Z,1516694383.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:43.766Z,1516694383.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:44.143Z,1516694384.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:44.541Z,1516694384.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:44.940Z,1516694384.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:45.350Z,1516694385.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:45.769Z,1516694385.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:46.165Z,1516694386.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:46.545Z,1516694386.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:46.936Z,1516694386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:47.340Z,1516694387.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:47.738Z,1516694387.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:48.138Z,1516694388.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:48.534Z,1516694388.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:48.950Z,1516694388.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:49.353Z,1516694389.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:49.753Z,1516694389.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:50.140Z,1516694390.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:50.539Z,1516694390.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:50.948Z,1516694390.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:51.343Z,1516694391.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:51.753Z,1516694391.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:52.153Z,1516694392.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:52.551Z,1516694392.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:52.941Z,1516694392.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:53.350Z,1516694393.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:53.740Z,1516694393.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:54.141Z,1516694394.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:54.541Z,1516694394.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:54.951Z,1516694394.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:55.353Z,1516694395.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:55.753Z,1516694395.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:56.149Z,1516694396.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:56.549Z,1516694396.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:56.948Z,1516694396.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:57.361Z,1516694397.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:57.758Z,1516694397.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:58.169Z,1516694398.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:58.562Z,1516694398.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:58.936Z,1516694398.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:59.339Z,1516694399.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T07:59:59.749Z,1516694399.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:00.141Z,1516694400.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:00.538Z,1516694400.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:00.942Z,1516694400.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:01.342Z,1516694401.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:01.742Z,1516694401.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:02.138Z,1516694402.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:02.538Z,1516694402.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:02.938Z,1516694402.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:03.339Z,1516694403.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:03.742Z,1516694403.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:04.146Z,1516694404.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:04.554Z,1516694404.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:07.633Z,1516694407.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:07.774Z,1516694407.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:08.129Z,1516694408.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:08.528Z,1516694408.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:08.927Z,1516694408.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:09.325Z,1516694409.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:09.705Z,1516694409.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:10.104Z,1516694410.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:10.509Z,1516694410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:10.910Z,1516694410.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:11.309Z,1516694411.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:11.717Z,1516694411.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:12.103Z,1516694412.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:12.501Z,1516694412.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:12.901Z,1516694412.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:13.304Z,1516694413.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:13.717Z,1516694413.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:14.117Z,1516694414.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:14.513Z,1516694414.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:14.904Z,1516694414.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:15.301Z,1516694415.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:15.708Z,1516694415.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:16.109Z,1516694416.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:16.517Z,1516694416.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:16.904Z,1516694416.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:17.298Z,1516694417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:17.709Z,1516694417.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:18.116Z,1516694418.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:18.523Z,1516694418.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:18.913Z,1516694418.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:19.302Z,1516694419.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:19.705Z,1516694419.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:20.107Z,1516694420.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:20.502Z,1516694420.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:20.911Z,1516694420.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:21.313Z,1516694421.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:21.720Z,1516694421.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:22.103Z,1516694422.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:22.507Z,1516694422.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:22.911Z,1516694422.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:23.309Z,1516694423.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:23.718Z,1516694423.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:24.114Z,1516694424.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:24.517Z,1516694424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:24.902Z,1516694424.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:25.306Z,1516694425.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:25.714Z,1516694425.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:26.113Z,1516694426.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:26.509Z,1516694426.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:26.908Z,1516694426.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:27.305Z,1516694427.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:27.711Z,1516694427.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:28.111Z,1516694428.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:28.525Z,1516694428.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:28.908Z,1516694428.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:29.307Z,1516694429.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:29.711Z,1516694429.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:30.120Z,1516694430.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:30.517Z,1516694430.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:30.908Z,1516694430.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:31.310Z,1516694431.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:31.714Z,1516694431.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:32.125Z,1516694432.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:32.553Z,1516694432.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:32.956Z,1516694432.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:33.318Z,1516694433.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:33.722Z,1516694433.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:34.129Z,1516694434.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:34.544Z,1516694434.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:34.939Z,1516694434.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:35.306Z,1516694435.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:35.678Z,1516694435.678 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:00:35.679Z,1516694435.679 [NAL9602] Data Fault, FailCount= 1 2018-01-23T08:00:35.679Z,1516694435.679 [NAL9602](ERROR): Data Fault 2018-01-23T08:00:35.731Z,1516694435.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:35.752Z,1516694435.752 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:00:36.060Z,1516694436.060 [NAL9602](INFO): Powering down 2018-01-23T08:00:36.112Z,1516694436.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:36.503Z,1516694436.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:36.900Z,1516694436.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:36.913Z,1516694436.913 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:00:36.913Z,1516694436.913 [NAL9602] No Fault, FailCount= 1 2018-01-23T08:00:37.301Z,1516694437.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:37.697Z,1516694437.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:38.130Z,1516694438.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:38.573Z,1516694438.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:38.936Z,1516694438.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:39.313Z,1516694439.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:39.720Z,1516694439.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:40.122Z,1516694440.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:40.510Z,1516694440.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:40.929Z,1516694440.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:41.317Z,1516694441.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:41.720Z,1516694441.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:42.136Z,1516694442.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:42.520Z,1516694442.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:42.928Z,1516694442.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:43.328Z,1516694443.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:43.731Z,1516694443.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:44.109Z,1516694444.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:44.549Z,1516694444.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:44.919Z,1516694444.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:45.364Z,1516694445.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:45.742Z,1516694445.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:46.118Z,1516694446.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:46.527Z,1516694446.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:46.902Z,1516694446.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:47.307Z,1516694447.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:47.709Z,1516694447.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:48.103Z,1516694448.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:48.502Z,1516694448.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:48.913Z,1516694448.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:49.308Z,1516694449.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:49.707Z,1516694449.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:50.109Z,1516694450.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:50.503Z,1516694450.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:50.905Z,1516694450.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:51.308Z,1516694451.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:51.703Z,1516694451.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:52.108Z,1516694452.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:52.508Z,1516694452.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:52.908Z,1516694452.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:53.307Z,1516694453.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:53.707Z,1516694453.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:54.117Z,1516694454.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:54.501Z,1516694454.501 [PNI_TCM](ERROR): CRC does not match. Expected:0x31335 got:0x7234 2018-01-23T08:00:54.529Z,1516694454.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:54.906Z,1516694454.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:55.306Z,1516694455.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:55.725Z,1516694455.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:56.100Z,1516694456.100 [PNI_TCM](ERROR): CRC does not match. Expected:0x47611 got:0x33255 2018-01-23T08:00:56.117Z,1516694456.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:56.507Z,1516694456.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:56.907Z,1516694456.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:57.311Z,1516694457.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:57.704Z,1516694457.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:58.113Z,1516694458.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:58.505Z,1516694458.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:58.917Z,1516694458.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:59.297Z,1516694459.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:00:59.713Z,1516694459.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:00.111Z,1516694460.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:00.111Z,1516694460.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-01-23T08:01:00.111Z,1516694460.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:01:00.113Z,1516694460.113 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:00.113Z,1516694460.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-01-23T08:01:00.113Z,1516694460.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:01:00.115Z,1516694460.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:00.115Z,1516694460.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95 2018-01-23T08:01:00.115Z,1516694460.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:01:00.127Z,1516694460.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:01:00.127Z,1516694460.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:01:00.127Z,1516694460.127 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:01:00.528Z,1516694460.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:01:00.528Z,1516694460.528 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-01-23T08:01:00.528Z,1516694460.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:01:00.528Z,1516694460.528 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-01-23T08:01:00.529Z,1516694460.529 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:01:00.529Z,1516694460.529 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95 2018-01-23T08:01:00.913Z,1516694460.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:01:00.913Z,1516694460.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:01:00.914Z,1516694460.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:01:00.914Z,1516694460.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:01:00.915Z,1516694460.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:01:00.915Z,1516694460.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:01:00.915Z,1516694460.915 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:01:00.916Z,1516694460.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:01:00.916Z,1516694460.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:01:01.317Z,1516694461.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:01:01.318Z,1516694461.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:01.708Z,1516694461.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:01:01.709Z,1516694461.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:02.121Z,1516694462.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:01:02.122Z,1516694462.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:02.522Z,1516694462.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:01:02.523Z,1516694462.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:02.526Z,1516694462.526 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T07:56:02.3Z 2018-01-23T08:01:02.526Z,1516694462.526 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:01:02.526Z,1516694462.526 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:01:02.891Z,1516694462.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:01:02.892Z,1516694462.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:06.151Z,1516694466.151 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:01:06.196Z,1516694466.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T08:01:06.197Z,1516694466.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:06.332Z,1516694466.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s. 2018-01-23T08:01:06.333Z,1516694466.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:09.502Z,1516694469.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s. 2018-01-23T08:01:09.503Z,1516694469.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:09.595Z,1516694469.595 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0112.lzma 2018-01-23T08:01:09.671Z,1516694469.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:01:09.672Z,1516694469.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:10.004Z,1516694470.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T08:01:10.005Z,1516694470.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:10.368Z,1516694470.368 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0112.lzma.bak 2018-01-23T08:01:10.369Z,1516694470.369 [DataOverHttps](INFO): SBD MOMSN=7755247 2018-01-23T08:01:10.409Z,1516694470.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T08:01:10.410Z,1516694470.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:11.042Z,1516694471.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T08:01:11.043Z,1516694471.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:11.226Z,1516694471.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T08:01:11.229Z,1516694471.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:14.292Z,1516694474.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s. 2018-01-23T08:01:14.293Z,1516694474.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:14.436Z,1516694474.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T08:01:14.437Z,1516694474.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:14.778Z,1516694474.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T08:01:14.779Z,1516694474.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:15.180Z,1516694475.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T08:01:15.181Z,1516694475.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:15.558Z,1516694475.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s. 2018-01-23T08:01:15.579Z,1516694475.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:15.967Z,1516694475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T08:01:15.968Z,1516694475.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:19.050Z,1516694479.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T08:01:19.051Z,1516694479.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:19.127Z,1516694479.127 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0113.lzma 2018-01-23T08:01:19.189Z,1516694479.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T08:01:19.190Z,1516694479.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:19.508Z,1516694479.508 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:01:19.560Z,1516694479.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T08:01:19.561Z,1516694479.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:19.905Z,1516694479.905 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0113.lzma.bak 2018-01-23T08:01:19.905Z,1516694479.905 [DataOverHttps](INFO): SBD MOMSN=7755249 2018-01-23T08:01:19.963Z,1516694479.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T08:01:19.963Z,1516694479.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:20.605Z,1516694480.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:20.608Z,1516694480.608 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:01:20.608Z,1516694480.608 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:01:20.608Z,1516694480.608 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:01:20.781Z,1516694480.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:23.854Z,1516694483.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:23.985Z,1516694483.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:24.346Z,1516694484.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:24.756Z,1516694484.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:25.152Z,1516694485.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:25.546Z,1516694485.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:25.964Z,1516694485.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:26.356Z,1516694486.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:26.757Z,1516694486.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:27.161Z,1516694487.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:27.549Z,1516694487.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:27.949Z,1516694487.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:28.353Z,1516694488.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:28.747Z,1516694488.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:29.157Z,1516694489.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:29.568Z,1516694489.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:29.969Z,1516694489.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:30.353Z,1516694490.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:30.753Z,1516694490.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:31.152Z,1516694491.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:31.549Z,1516694491.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:31.958Z,1516694491.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:32.365Z,1516694492.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:32.765Z,1516694492.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:33.155Z,1516694493.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:33.557Z,1516694493.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:33.953Z,1516694493.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:34.353Z,1516694494.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:34.747Z,1516694494.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:35.157Z,1516694495.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:35.561Z,1516694495.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:35.957Z,1516694495.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:36.349Z,1516694496.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:36.747Z,1516694496.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:37.150Z,1516694497.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:37.557Z,1516694497.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:37.958Z,1516694497.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:38.361Z,1516694498.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:38.758Z,1516694498.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:39.149Z,1516694499.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:39.549Z,1516694499.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:39.958Z,1516694499.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:40.348Z,1516694500.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:40.753Z,1516694500.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:41.173Z,1516694501.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:41.562Z,1516694501.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:41.969Z,1516694501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:42.357Z,1516694502.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:42.757Z,1516694502.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:43.154Z,1516694503.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:43.557Z,1516694503.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:43.964Z,1516694503.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:44.371Z,1516694504.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:44.760Z,1516694504.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:45.157Z,1516694505.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:45.552Z,1516694505.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:45.956Z,1516694505.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:46.361Z,1516694506.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:46.757Z,1516694506.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:47.160Z,1516694507.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:47.568Z,1516694507.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:47.960Z,1516694507.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:48.354Z,1516694508.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:48.757Z,1516694508.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:49.214Z,1516694509.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:49.557Z,1516694509.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:49.969Z,1516694509.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:50.362Z,1516694510.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:50.750Z,1516694510.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:51.167Z,1516694511.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:51.559Z,1516694511.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:51.959Z,1516694511.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:52.359Z,1516694512.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:52.737Z,1516694512.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:53.161Z,1516694513.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:53.570Z,1516694513.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:53.969Z,1516694513.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:54.365Z,1516694514.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:54.743Z,1516694514.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:55.148Z,1516694515.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:55.549Z,1516694515.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:55.979Z,1516694515.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:56.350Z,1516694516.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:56.754Z,1516694516.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:57.147Z,1516694517.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:57.548Z,1516694517.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:57.947Z,1516694517.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:58.354Z,1516694518.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:58.748Z,1516694518.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:59.154Z,1516694519.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:59.580Z,1516694519.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:01:59.978Z,1516694519.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:00.347Z,1516694520.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:00.756Z,1516694520.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:01.144Z,1516694521.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:01.547Z,1516694521.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:01.953Z,1516694521.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:02.354Z,1516694522.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:02.754Z,1516694522.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:03.147Z,1516694523.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:03.549Z,1516694523.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:03.947Z,1516694523.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:04.354Z,1516694524.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:04.747Z,1516694524.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:05.158Z,1516694525.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:05.553Z,1516694525.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:05.962Z,1516694525.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:06.350Z,1516694526.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:06.752Z,1516694526.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:07.157Z,1516694527.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:07.553Z,1516694527.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:07.961Z,1516694527.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:08.357Z,1516694528.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:08.757Z,1516694528.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:09.148Z,1516694529.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:09.547Z,1516694529.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:09.946Z,1516694529.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:10.360Z,1516694530.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:10.755Z,1516694530.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:11.162Z,1516694531.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:11.563Z,1516694531.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:11.958Z,1516694531.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:12.357Z,1516694532.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:12.765Z,1516694532.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:13.149Z,1516694533.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:13.553Z,1516694533.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:13.959Z,1516694533.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:14.365Z,1516694534.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:14.758Z,1516694534.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:15.157Z,1516694535.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:15.555Z,1516694535.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:15.968Z,1516694535.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:16.363Z,1516694536.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:16.758Z,1516694536.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:17.149Z,1516694537.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:17.551Z,1516694537.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:17.969Z,1516694537.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:18.373Z,1516694538.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:18.760Z,1516694538.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:19.156Z,1516694539.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:19.550Z,1516694539.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:19.972Z,1516694539.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:20.365Z,1516694540.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:20.765Z,1516694540.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:21.165Z,1516694541.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:24.253Z,1516694544.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:24.381Z,1516694544.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:24.756Z,1516694544.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:25.157Z,1516694545.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:25.557Z,1516694545.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:25.930Z,1516694545.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:26.333Z,1516694546.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:26.730Z,1516694546.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:27.134Z,1516694547.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:27.538Z,1516694547.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:27.934Z,1516694547.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:28.329Z,1516694548.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:28.730Z,1516694548.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:29.132Z,1516694549.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:29.536Z,1516694549.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:29.962Z,1516694549.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:30.338Z,1516694550.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:30.745Z,1516694550.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:31.131Z,1516694551.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:31.529Z,1516694551.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:31.944Z,1516694551.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:32.342Z,1516694552.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:32.740Z,1516694552.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:33.131Z,1516694553.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:33.533Z,1516694553.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:33.951Z,1516694553.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:34.340Z,1516694554.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:34.741Z,1516694554.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:35.145Z,1516694555.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:35.534Z,1516694555.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:35.941Z,1516694555.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:36.345Z,1516694556.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:36.740Z,1516694556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:37.133Z,1516694557.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:37.530Z,1516694557.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:37.940Z,1516694557.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:38.341Z,1516694558.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:38.749Z,1516694558.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:39.136Z,1516694559.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:39.536Z,1516694559.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:39.934Z,1516694559.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:40.348Z,1516694560.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:40.745Z,1516694560.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:41.149Z,1516694561.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:41.530Z,1516694561.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:41.937Z,1516694561.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:42.334Z,1516694562.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:42.737Z,1516694562.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:43.146Z,1516694563.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:43.549Z,1516694563.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:43.944Z,1516694563.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:44.335Z,1516694564.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:44.734Z,1516694564.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:45.141Z,1516694565.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:45.537Z,1516694565.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:45.941Z,1516694565.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:46.341Z,1516694566.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:46.745Z,1516694566.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:47.149Z,1516694567.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:47.530Z,1516694567.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:47.940Z,1516694567.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:48.333Z,1516694568.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:48.736Z,1516694568.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:49.153Z,1516694569.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:49.546Z,1516694569.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:49.948Z,1516694569.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:50.334Z,1516694570.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:50.738Z,1516694570.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:51.135Z,1516694571.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:51.533Z,1516694571.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:51.933Z,1516694571.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:52.341Z,1516694572.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:52.753Z,1516694572.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:53.149Z,1516694573.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:53.534Z,1516694573.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:53.936Z,1516694573.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:54.349Z,1516694574.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:54.731Z,1516694574.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:55.142Z,1516694575.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:55.545Z,1516694575.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:55.945Z,1516694575.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:56.341Z,1516694576.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:56.732Z,1516694576.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:57.132Z,1516694577.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:57.542Z,1516694577.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:57.936Z,1516694577.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:58.342Z,1516694578.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:58.746Z,1516694578.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:59.145Z,1516694579.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:59.535Z,1516694579.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:02:59.941Z,1516694579.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:00.334Z,1516694580.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:00.741Z,1516694580.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:01.153Z,1516694581.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:01.547Z,1516694581.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:01.943Z,1516694581.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:02.335Z,1516694582.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:02.741Z,1516694582.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:03.141Z,1516694583.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:03.537Z,1516694583.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:03.945Z,1516694583.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:04.347Z,1516694584.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:04.746Z,1516694584.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:05.142Z,1516694585.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:05.534Z,1516694585.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:05.934Z,1516694585.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:06.345Z,1516694586.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:06.730Z,1516694586.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:07.145Z,1516694587.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:07.549Z,1516694587.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:07.949Z,1516694587.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:08.331Z,1516694588.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:08.744Z,1516694588.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:09.133Z,1516694589.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:09.541Z,1516694589.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:09.941Z,1516694589.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:10.344Z,1516694590.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:10.745Z,1516694590.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:11.146Z,1516694591.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:11.535Z,1516694591.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:11.936Z,1516694591.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:12.336Z,1516694592.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:12.736Z,1516694592.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:13.145Z,1516694593.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:13.548Z,1516694593.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:13.942Z,1516694593.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:14.332Z,1516694594.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:14.743Z,1516694594.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:15.135Z,1516694595.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:15.539Z,1516694595.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:15.935Z,1516694595.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:16.348Z,1516694596.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:16.745Z,1516694596.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:17.149Z,1516694597.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:17.540Z,1516694597.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:17.940Z,1516694597.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:18.353Z,1516694598.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:18.730Z,1516694598.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x9258 got:0x49152 2018-01-23T08:03:18.749Z,1516694598.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:19.145Z,1516694599.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:19.545Z,1516694599.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:19.948Z,1516694599.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:20.338Z,1516694600.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:20.743Z,1516694600.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:21.135Z,1516694601.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:21.557Z,1516694601.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:24.626Z,1516694604.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x65258 got:0x263 2018-01-23T08:03:24.626Z,1516694604.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x469 got:0x53767 2018-01-23T08:03:24.627Z,1516694604.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x20477 got:0x27399 2018-01-23T08:03:24.627Z,1516694604.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x22899 got:0x60167 2018-01-23T08:03:24.627Z,1516694604.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x13853 got:0x47111 2018-01-23T08:03:24.628Z,1516694604.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x29514 got:0x58887 2018-01-23T08:03:24.628Z,1516694604.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x7676 got:0x27655 2018-01-23T08:03:24.653Z,1516694604.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:24.787Z,1516694604.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:25.162Z,1516694605.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:25.590Z,1516694605.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:25.960Z,1516694605.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:26.359Z,1516694606.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:26.760Z,1516694606.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:27.174Z,1516694607.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:27.576Z,1516694607.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:27.968Z,1516694607.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:28.358Z,1516694608.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:28.757Z,1516694608.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:29.165Z,1516694609.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:29.558Z,1516694609.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:29.962Z,1516694609.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:30.377Z,1516694610.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:30.770Z,1516694610.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:31.169Z,1516694611.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:31.565Z,1516694611.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:31.963Z,1516694611.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:32.368Z,1516694612.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:32.765Z,1516694612.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:33.168Z,1516694613.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:33.576Z,1516694613.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:33.973Z,1516694613.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:34.368Z,1516694614.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:34.764Z,1516694614.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:35.163Z,1516694615.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:35.562Z,1516694615.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:35.965Z,1516694615.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:36.373Z,1516694616.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:36.771Z,1516694616.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:37.176Z,1516694617.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:37.572Z,1516694617.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:37.971Z,1516694617.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:38.373Z,1516694618.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:38.750Z,1516694618.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:39.176Z,1516694619.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:39.588Z,1516694619.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:39.981Z,1516694619.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:40.373Z,1516694620.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:40.773Z,1516694620.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:41.157Z,1516694621.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:41.559Z,1516694621.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:41.960Z,1516694621.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:42.384Z,1516694622.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:42.781Z,1516694622.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:43.161Z,1516694623.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:43.565Z,1516694623.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:43.988Z,1516694623.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:44.361Z,1516694624.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:44.768Z,1516694624.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:45.169Z,1516694625.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:45.591Z,1516694625.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:45.970Z,1516694625.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:46.359Z,1516694626.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:46.760Z,1516694626.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:47.173Z,1516694627.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:47.564Z,1516694627.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:47.962Z,1516694627.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:48.365Z,1516694628.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:48.790Z,1516694628.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:49.173Z,1516694629.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:49.562Z,1516694629.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:49.959Z,1516694629.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:50.377Z,1516694630.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:50.758Z,1516694630.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:51.172Z,1516694631.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:51.577Z,1516694631.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:51.985Z,1516694631.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:52.366Z,1516694632.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:52.765Z,1516694632.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:53.158Z,1516694633.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:53.557Z,1516694633.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:53.968Z,1516694633.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:54.372Z,1516694634.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:54.773Z,1516694634.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:55.199Z,1516694635.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:55.562Z,1516694635.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:55.965Z,1516694635.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:56.361Z,1516694636.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:56.765Z,1516694636.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:57.166Z,1516694637.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:57.573Z,1516694637.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:57.969Z,1516694637.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:58.373Z,1516694638.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:58.761Z,1516694638.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:59.157Z,1516694639.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:59.570Z,1516694639.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:03:59.969Z,1516694639.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:00.380Z,1516694640.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:00.775Z,1516694640.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:01.177Z,1516694641.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:01.177Z,1516694641.177 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-01-23T08:04:01.177Z,1516694641.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:04:01.179Z,1516694641.179 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:01.179Z,1516694641.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-01-23T08:04:01.179Z,1516694641.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:04:01.181Z,1516694641.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:01.181Z,1516694641.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96 2018-01-23T08:04:01.181Z,1516694641.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:04:01.192Z,1516694641.192 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:04:01.193Z,1516694641.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:04:01.193Z,1516694641.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:04:01.597Z,1516694641.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:04:01.597Z,1516694641.597 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-01-23T08:04:01.598Z,1516694641.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:04:01.598Z,1516694641.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-01-23T08:04:01.598Z,1516694641.598 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:04:01.598Z,1516694641.598 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96 2018-01-23T08:04:01.946Z,1516694641.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:04:01.946Z,1516694641.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:04:01.946Z,1516694641.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:04:01.947Z,1516694641.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:04:01.947Z,1516694641.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:04:01.948Z,1516694641.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:04:01.948Z,1516694641.948 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:04:01.948Z,1516694641.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:04:01.949Z,1516694641.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:04:02.364Z,1516694642.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:04:02.366Z,1516694642.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:02.771Z,1516694642.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:04:02.775Z,1516694642.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:03.165Z,1516694643.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:04:03.166Z,1516694643.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:03.576Z,1516694643.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:04:03.578Z,1516694643.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:03.966Z,1516694643.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:04:03.967Z,1516694643.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:04.366Z,1516694644.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:04:04.368Z,1516694644.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:04.756Z,1516694644.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:04:04.757Z,1516694644.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:05.153Z,1516694645.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:04:05.154Z,1516694645.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:05.559Z,1516694645.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:04:05.560Z,1516694645.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:05.945Z,1516694645.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:04:05.946Z,1516694645.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:06.368Z,1516694646.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:04:06.369Z,1516694646.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:06.779Z,1516694646.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:04:06.780Z,1516694646.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:07.191Z,1516694647.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:04:07.192Z,1516694647.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:07.556Z,1516694647.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:04:07.557Z,1516694647.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:07.960Z,1516694647.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:04:07.961Z,1516694647.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:08.356Z,1516694648.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:04:08.357Z,1516694648.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:08.753Z,1516694648.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:04:08.754Z,1516694648.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:09.166Z,1516694649.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:04:09.184Z,1516694649.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:09.587Z,1516694649.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:04:09.588Z,1516694649.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:09.958Z,1516694649.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:04:09.959Z,1516694649.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:10.354Z,1516694650.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:04:10.355Z,1516694650.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:10.754Z,1516694650.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:04:10.756Z,1516694650.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:11.165Z,1516694651.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:04:11.166Z,1516694651.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:11.556Z,1516694651.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:04:11.557Z,1516694651.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:11.956Z,1516694651.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:04:11.957Z,1516694651.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:12.375Z,1516694652.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:04:12.377Z,1516694652.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:12.761Z,1516694652.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:04:12.762Z,1516694652.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:13.168Z,1516694653.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:04:13.169Z,1516694653.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:13.564Z,1516694653.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:04:13.565Z,1516694653.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:13.954Z,1516694653.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:04:13.955Z,1516694653.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:14.363Z,1516694654.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:04:14.364Z,1516694654.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:14.758Z,1516694654.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:04:14.759Z,1516694654.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:15.169Z,1516694655.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:04:15.170Z,1516694655.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:15.570Z,1516694655.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:04:15.575Z,1516694655.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:15.969Z,1516694655.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:04:15.970Z,1516694655.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:16.363Z,1516694656.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:04:16.364Z,1516694656.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:16.764Z,1516694656.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:04:16.765Z,1516694656.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:17.161Z,1516694657.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:04:17.162Z,1516694657.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:17.562Z,1516694657.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:04:17.563Z,1516694657.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:17.968Z,1516694657.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:04:17.969Z,1516694657.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:17.982Z,1516694657.982 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:04:18.366Z,1516694658.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:04:18.367Z,1516694658.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:18.781Z,1516694658.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:04:18.783Z,1516694658.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:19.180Z,1516694659.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:04:19.181Z,1516694659.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:19.564Z,1516694659.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:04:19.565Z,1516694659.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:19.967Z,1516694659.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:04:19.968Z,1516694659.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:20.368Z,1516694660.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:04:20.369Z,1516694660.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:20.759Z,1516694660.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:04:20.760Z,1516694660.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:21.170Z,1516694661.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:04:21.171Z,1516694661.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:21.575Z,1516694661.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:24.665Z,1516694664.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:24.797Z,1516694664.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:25.134Z,1516694665.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:25.536Z,1516694665.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:25.931Z,1516694665.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:26.341Z,1516694666.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:26.744Z,1516694666.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:27.145Z,1516694667.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:27.545Z,1516694667.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:27.939Z,1516694667.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:28.345Z,1516694668.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:28.738Z,1516694668.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:29.141Z,1516694669.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:29.545Z,1516694669.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:29.942Z,1516694669.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:30.332Z,1516694670.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:30.737Z,1516694670.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:31.149Z,1516694671.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:31.545Z,1516694671.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:31.945Z,1516694671.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:32.345Z,1516694672.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:32.739Z,1516694672.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:33.145Z,1516694673.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:33.546Z,1516694673.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:33.948Z,1516694673.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:34.339Z,1516694674.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:34.732Z,1516694674.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:35.141Z,1516694675.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:35.545Z,1516694675.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:35.942Z,1516694675.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:36.339Z,1516694676.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:36.738Z,1516694676.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:37.142Z,1516694677.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:37.545Z,1516694677.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:37.942Z,1516694677.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:38.345Z,1516694678.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:38.739Z,1516694678.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:39.145Z,1516694679.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:39.546Z,1516694679.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:39.945Z,1516694679.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:40.339Z,1516694680.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:40.735Z,1516694680.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:41.141Z,1516694681.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:41.545Z,1516694681.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:41.942Z,1516694681.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:42.332Z,1516694682.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:42.739Z,1516694682.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:43.142Z,1516694683.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:43.545Z,1516694683.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:43.942Z,1516694683.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:44.339Z,1516694684.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:44.736Z,1516694684.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:45.145Z,1516694685.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:45.546Z,1516694685.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:45.948Z,1516694685.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:46.331Z,1516694686.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:46.745Z,1516694686.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:47.149Z,1516694687.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:47.545Z,1516694687.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:47.942Z,1516694687.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:48.340Z,1516694688.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:48.737Z,1516694688.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:49.150Z,1516694689.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:49.547Z,1516694689.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:49.949Z,1516694689.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:50.340Z,1516694690.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:50.749Z,1516694690.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:51.144Z,1516694691.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:51.555Z,1516694691.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:51.948Z,1516694691.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:52.326Z,1516694692.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:52.728Z,1516694692.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:53.131Z,1516694693.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:53.552Z,1516694693.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:53.957Z,1516694693.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:54.357Z,1516694694.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:54.726Z,1516694694.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:55.129Z,1516694695.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:55.532Z,1516694695.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:55.930Z,1516694695.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:56.358Z,1516694696.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:56.754Z,1516694696.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:57.159Z,1516694697.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:57.529Z,1516694697.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:57.937Z,1516694697.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:58.336Z,1516694698.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:58.734Z,1516694698.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:59.141Z,1516694699.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:59.541Z,1516694699.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:04:59.965Z,1516694699.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:00.339Z,1516694700.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:00.738Z,1516694700.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:01.137Z,1516694701.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:01.533Z,1516694701.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:01.931Z,1516694701.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:02.337Z,1516694702.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:02.737Z,1516694702.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:03.141Z,1516694703.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:03.541Z,1516694703.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:03.935Z,1516694703.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:04.330Z,1516694704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:04.740Z,1516694704.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:05.135Z,1516694705.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:05.540Z,1516694705.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:05.945Z,1516694705.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:06.341Z,1516694706.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:06.733Z,1516694706.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:07.137Z,1516694707.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:07.532Z,1516694707.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:07.941Z,1516694707.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:08.349Z,1516694708.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:08.745Z,1516694708.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:09.141Z,1516694709.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:09.537Z,1516694709.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:09.935Z,1516694709.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:10.333Z,1516694710.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:10.733Z,1516694710.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:11.143Z,1516694711.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:11.543Z,1516694711.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:11.945Z,1516694711.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:12.342Z,1516694712.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:12.739Z,1516694712.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:13.139Z,1516694713.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:13.543Z,1516694713.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:13.941Z,1516694713.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:14.346Z,1516694714.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:14.755Z,1516694714.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:15.142Z,1516694715.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:15.541Z,1516694715.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:15.946Z,1516694715.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:16.333Z,1516694716.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:16.740Z,1516694716.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:17.143Z,1516694717.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:17.545Z,1516694717.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:17.956Z,1516694717.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:18.352Z,1516694718.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:18.747Z,1516694718.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:19.145Z,1516694719.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:19.524Z,1516694719.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:19.933Z,1516694719.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:20.360Z,1516694720.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:20.764Z,1516694720.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:21.138Z,1516694721.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:21.532Z,1516694721.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:21.932Z,1516694721.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:25.031Z,1516694725.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:25.169Z,1516694725.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:25.526Z,1516694725.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:25.936Z,1516694725.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:26.327Z,1516694726.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:26.723Z,1516694726.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:27.118Z,1516694727.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:27.523Z,1516694727.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:27.923Z,1516694727.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:28.326Z,1516694728.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:28.737Z,1516694728.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:29.126Z,1516694729.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:29.518Z,1516694729.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:29.929Z,1516694729.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:30.329Z,1516694730.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:30.719Z,1516694730.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:31.124Z,1516694731.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:31.527Z,1516694731.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:31.936Z,1516694731.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:32.337Z,1516694732.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:32.729Z,1516694732.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:33.127Z,1516694733.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:33.533Z,1516694733.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:33.923Z,1516694733.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:34.335Z,1516694734.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:34.733Z,1516694734.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:35.134Z,1516694735.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:35.525Z,1516694735.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:35.935Z,1516694735.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:36.333Z,1516694736.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:36.712Z,1516694736.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:37.134Z,1516694737.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:37.553Z,1516694737.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:37.989Z,1516694737.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:38.350Z,1516694738.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:38.767Z,1516694738.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:39.145Z,1516694739.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:39.529Z,1516694739.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:39.944Z,1516694739.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:40.330Z,1516694740.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:40.745Z,1516694740.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:41.141Z,1516694741.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:41.561Z,1516694741.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:41.929Z,1516694741.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:42.338Z,1516694742.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:42.784Z,1516694742.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:43.129Z,1516694743.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:43.613Z,1516694743.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:43.949Z,1516694743.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:44.341Z,1516694744.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:44.739Z,1516694744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:45.173Z,1516694745.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:45.541Z,1516694745.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:45.949Z,1516694745.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:46.397Z,1516694746.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:46.753Z,1516694746.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:47.170Z,1516694747.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:47.525Z,1516694747.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:47.914Z,1516694747.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:48.318Z,1516694748.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:48.725Z,1516694748.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:49.116Z,1516694749.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:49.525Z,1516694749.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:49.932Z,1516694749.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:50.325Z,1516694750.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:50.717Z,1516694750.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:51.120Z,1516694751.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:51.520Z,1516694751.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:51.925Z,1516694751.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:52.332Z,1516694752.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:52.733Z,1516694752.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:53.128Z,1516694753.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:53.528Z,1516694753.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:53.915Z,1516694753.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:54.325Z,1516694754.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:54.720Z,1516694754.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:55.120Z,1516694755.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:55.525Z,1516694755.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:55.936Z,1516694755.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:56.325Z,1516694756.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:56.725Z,1516694756.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:57.129Z,1516694757.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:57.520Z,1516694757.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:57.929Z,1516694757.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:58.327Z,1516694758.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:58.729Z,1516694758.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:59.126Z,1516694759.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:59.525Z,1516694759.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:05:59.925Z,1516694759.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:00.316Z,1516694760.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:00.725Z,1516694760.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:01.123Z,1516694761.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:01.527Z,1516694761.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:01.941Z,1516694761.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:02.411Z,1516694762.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:02.720Z,1516694762.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:03.125Z,1516694763.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:03.533Z,1516694763.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:03.921Z,1516694763.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:04.333Z,1516694764.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:04.730Z,1516694764.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:05.126Z,1516694765.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:05.518Z,1516694765.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:05.923Z,1516694765.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:06.323Z,1516694766.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:06.732Z,1516694766.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:07.124Z,1516694767.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:07.537Z,1516694767.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:07.932Z,1516694767.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:08.327Z,1516694768.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:08.727Z,1516694768.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:09.129Z,1516694769.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:09.523Z,1516694769.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:09.925Z,1516694769.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:10.336Z,1516694770.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:10.733Z,1516694770.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:11.139Z,1516694771.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:11.525Z,1516694771.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:11.910Z,1516694771.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:12.337Z,1516694772.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:12.738Z,1516694772.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:13.138Z,1516694773.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:13.541Z,1516694773.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:13.937Z,1516694773.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:14.321Z,1516694774.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:14.717Z,1516694774.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:15.115Z,1516694775.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:15.523Z,1516694775.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:15.949Z,1516694775.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:16.324Z,1516694776.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:16.720Z,1516694776.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:17.115Z,1516694777.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:17.516Z,1516694777.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:17.915Z,1516694777.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:18.325Z,1516694778.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:18.733Z,1516694778.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:19.125Z,1516694779.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:19.517Z,1516694779.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:19.924Z,1516694779.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:20.329Z,1516694780.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:20.726Z,1516694780.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:21.125Z,1516694781.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:21.128Z,1516694781.128 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:06:21.128Z,1516694781.128 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:06:21.128Z,1516694781.128 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:06:21.128Z,1516694781.128 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:06:21.517Z,1516694781.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:21.520Z,1516694781.520 [Default:CheckIn:D] Stopped 2018-01-23T08:06:21.520Z,1516694781.520 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:06:21.918Z,1516694781.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 288.491016 min 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn:E] Stopped 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn] Stopped 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn](INFO): Running loop #29 2018-01-23T08:06:21.926Z,1516694781.926 [Default:CheckIn] Running Loop=29 2018-01-23T08:06:21.931Z,1516694781.931 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:06:21.931Z,1516694781.931 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:06:22.328Z,1516694782.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:25.433Z,1516694785.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:25.589Z,1516694785.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:25.922Z,1516694785.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:26.336Z,1516694786.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:26.727Z,1516694786.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:27.127Z,1516694787.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:27.530Z,1516694787.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:27.930Z,1516694787.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:28.332Z,1516694788.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:28.728Z,1516694788.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:29.123Z,1516694789.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:29.535Z,1516694789.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:29.932Z,1516694789.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:30.329Z,1516694790.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:30.735Z,1516694790.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:31.137Z,1516694791.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:31.508Z,1516694791.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:31.906Z,1516694791.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:32.341Z,1516694792.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:32.731Z,1516694792.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:33.140Z,1516694793.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:33.532Z,1516694793.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:33.915Z,1516694793.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:34.345Z,1516694794.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:34.739Z,1516694794.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:35.139Z,1516694795.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:35.519Z,1516694795.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:35.921Z,1516694795.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:36.321Z,1516694796.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:36.728Z,1516694796.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:37.130Z,1516694797.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:37.516Z,1516694797.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:37.915Z,1516694797.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:38.325Z,1516694798.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:38.722Z,1516694798.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:39.128Z,1516694799.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:39.518Z,1516694799.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:39.914Z,1516694799.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:40.324Z,1516694800.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:40.726Z,1516694800.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:41.122Z,1516694801.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:41.519Z,1516694801.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:41.918Z,1516694801.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:42.321Z,1516694802.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:42.721Z,1516694802.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:43.121Z,1516694803.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:43.516Z,1516694803.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:43.915Z,1516694803.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:44.322Z,1516694804.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:44.721Z,1516694804.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:45.121Z,1516694805.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:45.521Z,1516694805.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:45.919Z,1516694805.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:46.323Z,1516694806.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:46.722Z,1516694806.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:47.122Z,1516694807.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:47.522Z,1516694807.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:47.929Z,1516694807.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:48.326Z,1516694808.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:48.726Z,1516694808.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:49.131Z,1516694809.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:49.519Z,1516694809.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:49.919Z,1516694809.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:50.327Z,1516694810.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:50.727Z,1516694810.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:51.131Z,1516694811.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:51.537Z,1516694811.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:51.920Z,1516694811.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:52.325Z,1516694812.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:52.720Z,1516694812.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:53.115Z,1516694813.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:53.527Z,1516694813.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:53.930Z,1516694813.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:54.327Z,1516694814.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:54.725Z,1516694814.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:55.125Z,1516694815.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:55.515Z,1516694815.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:55.917Z,1516694815.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:56.325Z,1516694816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:56.726Z,1516694816.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:57.129Z,1516694817.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:57.529Z,1516694817.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:57.922Z,1516694817.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:58.320Z,1516694818.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:58.718Z,1516694818.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:59.116Z,1516694819.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:59.529Z,1516694819.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:06:59.933Z,1516694819.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:00.329Z,1516694820.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:00.720Z,1516694820.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:01.118Z,1516694821.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:01.525Z,1516694821.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:01.916Z,1516694821.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:02.325Z,1516694822.325 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:02.325Z,1516694822.325 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-01-23T08:07:02.325Z,1516694822.325 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:07:02.331Z,1516694822.331 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:02.331Z,1516694822.331 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-01-23T08:07:02.331Z,1516694822.331 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:07:02.333Z,1516694822.333 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:02.333Z,1516694822.333 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97 2018-01-23T08:07:02.333Z,1516694822.333 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:07:02.349Z,1516694822.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:07:02.350Z,1516694822.350 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:07:02.350Z,1516694822.350 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:07:02.741Z,1516694822.741 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:07:02.741Z,1516694822.741 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-01-23T08:07:02.742Z,1516694822.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:07:02.742Z,1516694822.742 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-01-23T08:07:02.742Z,1516694822.742 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:07:02.742Z,1516694822.742 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97 2018-01-23T08:07:03.139Z,1516694823.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:07:03.140Z,1516694823.140 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:07:03.140Z,1516694823.140 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:07:03.140Z,1516694823.140 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:07:03.141Z,1516694823.141 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:07:03.141Z,1516694823.141 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:07:03.141Z,1516694823.141 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:07:03.142Z,1516694823.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:07:03.142Z,1516694823.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:07:03.528Z,1516694823.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:07:03.529Z,1516694823.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:03.932Z,1516694823.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:07:03.933Z,1516694823.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:04.314Z,1516694824.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:07:04.341Z,1516694824.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:04.736Z,1516694824.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:07:04.737Z,1516694824.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:05.114Z,1516694825.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:07:05.115Z,1516694825.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:05.540Z,1516694825.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:07:05.541Z,1516694825.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:05.948Z,1516694825.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:07:05.949Z,1516694825.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:06.339Z,1516694826.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:07:06.340Z,1516694826.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:06.715Z,1516694826.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:07:06.716Z,1516694826.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:07.112Z,1516694827.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:07:07.113Z,1516694827.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:07.516Z,1516694827.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:07:07.517Z,1516694827.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:07.915Z,1516694827.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:07:07.916Z,1516694827.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:08.313Z,1516694828.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:07:08.314Z,1516694828.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:08.720Z,1516694828.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:07:08.721Z,1516694828.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:09.124Z,1516694829.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:07:09.125Z,1516694829.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:09.549Z,1516694829.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:07:09.551Z,1516694829.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:09.914Z,1516694829.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:07:09.915Z,1516694829.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:10.319Z,1516694830.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:07:10.320Z,1516694830.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:10.722Z,1516694830.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:07:10.728Z,1516694830.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:11.120Z,1516694831.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:07:11.121Z,1516694831.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:11.533Z,1516694831.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:07:11.534Z,1516694831.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:11.925Z,1516694831.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:07:11.926Z,1516694831.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:12.323Z,1516694832.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:07:12.324Z,1516694832.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:12.723Z,1516694832.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:07:12.724Z,1516694832.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:13.116Z,1516694833.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:07:13.117Z,1516694833.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:13.520Z,1516694833.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:07:13.521Z,1516694833.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:13.919Z,1516694833.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:07:13.920Z,1516694833.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:14.314Z,1516694834.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:07:14.315Z,1516694834.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:14.769Z,1516694834.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:07:14.770Z,1516694834.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:15.133Z,1516694835.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:07:15.134Z,1516694835.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:15.524Z,1516694835.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:07:15.525Z,1516694835.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:15.918Z,1516694835.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:07:15.919Z,1516694835.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:16.324Z,1516694836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:07:16.325Z,1516694836.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:16.724Z,1516694836.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:07:16.725Z,1516694836.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:17.117Z,1516694837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:07:17.118Z,1516694837.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:17.525Z,1516694837.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:07:17.526Z,1516694837.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:17.926Z,1516694837.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:07:17.927Z,1516694837.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:18.333Z,1516694838.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:07:18.351Z,1516694838.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:18.728Z,1516694838.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:07:18.729Z,1516694838.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:19.117Z,1516694839.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:07:19.118Z,1516694839.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:19.520Z,1516694839.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:07:19.521Z,1516694839.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:19.928Z,1516694839.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:07:19.929Z,1516694839.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:20.319Z,1516694840.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:07:20.320Z,1516694840.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:20.739Z,1516694840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:07:20.740Z,1516694840.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:21.129Z,1516694841.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:07:21.130Z,1516694841.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:21.530Z,1516694841.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:07:21.536Z,1516694841.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:21.928Z,1516694841.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:07:21.929Z,1516694841.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:22.325Z,1516694842.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:22.728Z,1516694842.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:25.816Z,1516694845.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:25.951Z,1516694845.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:26.303Z,1516694846.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:26.728Z,1516694846.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:27.094Z,1516694847.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:27.497Z,1516694847.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:27.889Z,1516694847.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:28.289Z,1516694848.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:28.713Z,1516694848.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:29.101Z,1516694849.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:29.505Z,1516694849.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:29.892Z,1516694849.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:30.293Z,1516694850.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:30.698Z,1516694850.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:31.098Z,1516694851.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:31.498Z,1516694851.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:31.898Z,1516694851.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:32.313Z,1516694852.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:32.679Z,1516694852.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:33.076Z,1516694853.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:33.483Z,1516694853.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:33.879Z,1516694853.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:34.279Z,1516694854.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:34.686Z,1516694854.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:35.092Z,1516694855.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:35.494Z,1516694855.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:35.878Z,1516694855.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:36.279Z,1516694856.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:36.681Z,1516694856.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:37.078Z,1516694857.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:37.489Z,1516694857.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:37.890Z,1516694857.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:38.298Z,1516694858.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:38.684Z,1516694858.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:39.089Z,1516694859.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:39.478Z,1516694859.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:39.888Z,1516694859.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:40.280Z,1516694860.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:40.722Z,1516694860.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:41.093Z,1516694861.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:41.489Z,1516694861.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:41.881Z,1516694861.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:42.289Z,1516694862.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:42.682Z,1516694862.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:43.081Z,1516694863.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:43.490Z,1516694863.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:43.893Z,1516694863.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:44.289Z,1516694864.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:44.684Z,1516694864.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:45.083Z,1516694865.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:45.489Z,1516694865.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:45.880Z,1516694865.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:46.281Z,1516694866.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:46.697Z,1516694866.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:47.093Z,1516694867.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:47.489Z,1516694867.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:47.881Z,1516694867.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:48.285Z,1516694868.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:48.682Z,1516694868.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:49.081Z,1516694869.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:49.490Z,1516694869.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:49.897Z,1516694869.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:50.289Z,1516694870.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:50.684Z,1516694870.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:51.089Z,1516694871.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:51.481Z,1516694871.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:51.884Z,1516694871.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:52.281Z,1516694872.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:52.689Z,1516694872.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:53.093Z,1516694873.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:53.490Z,1516694873.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:53.882Z,1516694873.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:54.282Z,1516694874.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:54.682Z,1516694874.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:55.087Z,1516694875.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:55.490Z,1516694875.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:55.894Z,1516694875.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:56.291Z,1516694876.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:56.691Z,1516694876.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:57.089Z,1516694877.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:57.497Z,1516694877.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:57.894Z,1516694877.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:58.290Z,1516694878.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:58.693Z,1516694878.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:59.091Z,1516694879.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:59.493Z,1516694879.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:07:59.904Z,1516694879.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:00.297Z,1516694880.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:00.673Z,1516694880.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:01.077Z,1516694881.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:01.505Z,1516694881.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:01.909Z,1516694881.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:02.309Z,1516694882.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:02.678Z,1516694882.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:03.105Z,1516694883.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:03.482Z,1516694883.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:03.879Z,1516694883.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:04.277Z,1516694884.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:04.703Z,1516694884.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:05.086Z,1516694885.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:05.483Z,1516694885.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:05.879Z,1516694885.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:06.284Z,1516694886.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:06.689Z,1516694886.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:07.083Z,1516694887.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:07.486Z,1516694887.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:07.887Z,1516694887.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:08.293Z,1516694888.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:08.681Z,1516694888.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:09.079Z,1516694889.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:09.489Z,1516694889.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:09.889Z,1516694889.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:10.290Z,1516694890.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:10.681Z,1516694890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:11.084Z,1516694891.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:11.493Z,1516694891.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:11.890Z,1516694891.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:12.289Z,1516694892.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:12.681Z,1516694892.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:13.078Z,1516694893.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:13.489Z,1516694893.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:13.893Z,1516694893.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:14.293Z,1516694894.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:14.684Z,1516694894.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:15.078Z,1516694895.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:15.490Z,1516694895.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:15.889Z,1516694895.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:16.289Z,1516694896.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:16.684Z,1516694896.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:17.081Z,1516694897.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:17.489Z,1516694897.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:17.893Z,1516694897.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:18.290Z,1516694898.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:18.682Z,1516694898.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:19.081Z,1516694899.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:19.490Z,1516694899.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:19.897Z,1516694899.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:20.289Z,1516694900.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:20.684Z,1516694900.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:21.078Z,1516694901.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:21.489Z,1516694901.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:21.900Z,1516694901.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:22.289Z,1516694902.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:22.682Z,1516694902.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:23.081Z,1516694903.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:26.193Z,1516694906.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:26.349Z,1516694906.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:26.693Z,1516694906.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:27.082Z,1516694907.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:27.480Z,1516694907.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:27.882Z,1516694907.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:28.289Z,1516694908.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:28.694Z,1516694908.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:29.103Z,1516694909.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:29.494Z,1516694909.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:29.881Z,1516694909.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:30.282Z,1516694910.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:30.681Z,1516694910.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:31.087Z,1516694911.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:31.497Z,1516694911.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:31.894Z,1516694911.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:32.290Z,1516694912.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:32.691Z,1516694912.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:33.126Z,1516694913.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:33.491Z,1516694913.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:33.900Z,1516694913.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:34.290Z,1516694914.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:34.691Z,1516694914.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:35.089Z,1516694915.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:35.501Z,1516694915.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:35.894Z,1516694915.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:36.290Z,1516694916.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:36.687Z,1516694916.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:37.087Z,1516694917.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:37.491Z,1516694917.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:37.895Z,1516694917.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:38.301Z,1516694918.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:38.694Z,1516694918.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:39.081Z,1516694919.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:39.493Z,1516694919.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:39.889Z,1516694919.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:40.278Z,1516694920.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:40.701Z,1516694920.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:41.095Z,1516694921.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:41.502Z,1516694921.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:41.891Z,1516694921.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:42.293Z,1516694922.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:42.694Z,1516694922.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:43.093Z,1516694923.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:43.472Z,1516694923.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:43.903Z,1516694923.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:44.305Z,1516694924.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:44.708Z,1516694924.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:45.074Z,1516694925.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:45.509Z,1516694925.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:45.881Z,1516694925.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:46.276Z,1516694926.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:46.716Z,1516694926.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:47.095Z,1516694927.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:47.497Z,1516694927.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:47.886Z,1516694927.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:48.291Z,1516694928.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:48.685Z,1516694928.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:49.082Z,1516694929.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:49.490Z,1516694929.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:49.890Z,1516694929.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:50.293Z,1516694930.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:50.697Z,1516694930.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:51.085Z,1516694931.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:51.485Z,1516694931.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:51.891Z,1516694931.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:52.287Z,1516694932.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:52.700Z,1516694932.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:53.093Z,1516694933.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:53.494Z,1516694933.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:53.885Z,1516694933.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:54.289Z,1516694934.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:54.685Z,1516694934.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:55.088Z,1516694935.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:55.486Z,1516694935.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:55.890Z,1516694935.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:56.294Z,1516694936.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:56.697Z,1516694936.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:57.077Z,1516694937.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:57.491Z,1516694937.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:57.892Z,1516694937.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:58.269Z,1516694938.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:58.693Z,1516694938.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:59.096Z,1516694939.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:59.497Z,1516694939.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:08:59.893Z,1516694939.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:00.271Z,1516694940.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:00.689Z,1516694940.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:01.080Z,1516694941.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:01.483Z,1516694941.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:01.906Z,1516694941.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:02.290Z,1516694942.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:02.692Z,1516694942.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:03.076Z,1516694943.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:03.478Z,1516694943.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:03.888Z,1516694943.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:04.276Z,1516694944.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:04.689Z,1516694944.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:05.092Z,1516694945.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:05.486Z,1516694945.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:05.878Z,1516694945.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:06.280Z,1516694946.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:06.685Z,1516694946.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:07.082Z,1516694947.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:07.480Z,1516694947.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:07.890Z,1516694947.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:08.293Z,1516694948.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:08.691Z,1516694948.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:09.089Z,1516694949.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:09.489Z,1516694949.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:09.889Z,1516694949.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:10.287Z,1516694950.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:10.691Z,1516694950.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:11.094Z,1516694951.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:11.494Z,1516694951.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:11.889Z,1516694951.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:12.283Z,1516694952.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:12.687Z,1516694952.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:13.081Z,1516694953.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:13.489Z,1516694953.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:13.891Z,1516694953.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:14.293Z,1516694954.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:14.698Z,1516694954.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:15.085Z,1516694955.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:15.485Z,1516694955.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:15.889Z,1516694955.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:16.287Z,1516694956.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:16.691Z,1516694956.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:17.106Z,1516694957.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:17.490Z,1516694957.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:17.889Z,1516694957.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:18.288Z,1516694958.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:18.686Z,1516694958.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:19.089Z,1516694959.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:19.497Z,1516694959.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:19.901Z,1516694959.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:20.298Z,1516694960.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:20.701Z,1516694960.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:21.077Z,1516694961.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:21.481Z,1516694961.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:21.881Z,1516694961.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:22.281Z,1516694962.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:22.686Z,1516694962.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:23.114Z,1516694963.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:23.509Z,1516694963.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:26.578Z,1516694966.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:26.720Z,1516694966.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:27.064Z,1516694967.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:27.472Z,1516694967.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:27.864Z,1516694967.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:28.267Z,1516694968.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:28.668Z,1516694968.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:29.040Z,1516694969.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:29.440Z,1516694969.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:29.869Z,1516694969.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:30.250Z,1516694970.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:30.674Z,1516694970.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:31.052Z,1516694971.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:31.445Z,1516694971.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:31.849Z,1516694971.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:32.243Z,1516694972.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:32.650Z,1516694972.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:33.057Z,1516694973.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:33.456Z,1516694973.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:33.846Z,1516694973.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:34.244Z,1516694974.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:34.644Z,1516694974.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:35.053Z,1516694975.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:35.442Z,1516694975.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:35.856Z,1516694975.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:36.253Z,1516694976.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:36.650Z,1516694976.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:37.043Z,1516694977.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:37.442Z,1516694977.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:37.852Z,1516694977.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:38.248Z,1516694978.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:38.653Z,1516694978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:39.057Z,1516694979.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:39.453Z,1516694979.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:39.844Z,1516694979.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:40.252Z,1516694980.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:40.648Z,1516694980.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:41.048Z,1516694981.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:41.453Z,1516694981.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:41.857Z,1516694981.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:42.253Z,1516694982.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:42.661Z,1516694982.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:43.044Z,1516694983.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:43.449Z,1516694983.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:43.848Z,1516694983.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:44.246Z,1516694984.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:44.654Z,1516694984.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:45.062Z,1516694985.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:45.460Z,1516694985.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:45.850Z,1516694985.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:46.253Z,1516694986.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:46.659Z,1516694986.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:47.064Z,1516694987.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:47.463Z,1516694987.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:47.856Z,1516694987.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:48.233Z,1516694988.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:48.661Z,1516694988.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:49.063Z,1516694989.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:49.458Z,1516694989.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:49.840Z,1516694989.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:50.240Z,1516694990.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:50.670Z,1516694990.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:51.054Z,1516694991.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:51.477Z,1516694991.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:51.846Z,1516694991.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:52.243Z,1516694992.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:52.650Z,1516694992.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:53.047Z,1516694993.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:53.447Z,1516694993.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:53.844Z,1516694993.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:54.251Z,1516694994.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:54.651Z,1516694994.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:55.049Z,1516694995.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:55.450Z,1516694995.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:55.853Z,1516694995.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:56.245Z,1516694996.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:56.653Z,1516694996.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:57.055Z,1516694997.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:57.450Z,1516694997.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:57.848Z,1516694997.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:58.252Z,1516694998.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:58.660Z,1516694998.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:59.055Z,1516694999.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:59.455Z,1516694999.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:09:59.845Z,1516694999.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:00.243Z,1516695000.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:00.654Z,1516695000.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:01.060Z,1516695001.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:01.465Z,1516695001.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:01.853Z,1516695001.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:02.247Z,1516695002.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:02.661Z,1516695002.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:03.065Z,1516695003.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:03.454Z,1516695003.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:03.455Z,1516695003.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-01-23T08:10:03.455Z,1516695003.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:10:03.456Z,1516695003.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:03.456Z,1516695003.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-01-23T08:10:03.457Z,1516695003.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:10:03.458Z,1516695003.458 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:03.458Z,1516695003.458 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98 2018-01-23T08:10:03.458Z,1516695003.458 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:10:03.470Z,1516695003.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:10:03.470Z,1516695003.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:10:03.491Z,1516695003.491 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:10:03.862Z,1516695003.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:10:03.862Z,1516695003.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-01-23T08:10:03.863Z,1516695003.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:10:03.863Z,1516695003.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-01-23T08:10:03.863Z,1516695003.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:10:03.863Z,1516695003.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98 2018-01-23T08:10:04.250Z,1516695004.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:10:04.250Z,1516695004.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:10:04.251Z,1516695004.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:10:04.251Z,1516695004.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:10:04.252Z,1516695004.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:10:04.252Z,1516695004.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:10:04.252Z,1516695004.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:10:04.253Z,1516695004.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:10:04.253Z,1516695004.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:10:04.669Z,1516695004.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:10:04.670Z,1516695004.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:05.055Z,1516695005.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:10:05.056Z,1516695005.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:05.463Z,1516695005.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:10:05.464Z,1516695005.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:05.846Z,1516695005.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:10:05.847Z,1516695005.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:06.248Z,1516695006.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:10:06.249Z,1516695006.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:06.671Z,1516695006.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:10:06.672Z,1516695006.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:07.064Z,1516695007.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:10:07.065Z,1516695007.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:07.456Z,1516695007.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:10:07.456Z,1516695007.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:07.851Z,1516695007.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:10:07.852Z,1516695007.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:08.254Z,1516695008.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:10:08.255Z,1516695008.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:08.654Z,1516695008.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:10:08.655Z,1516695008.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:09.062Z,1516695009.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:10:09.067Z,1516695009.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:09.456Z,1516695009.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:10:09.457Z,1516695009.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:09.852Z,1516695009.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:10:09.853Z,1516695009.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:10.259Z,1516695010.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:10:10.260Z,1516695010.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:10.664Z,1516695010.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:10:10.665Z,1516695010.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:11.063Z,1516695011.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:10:11.064Z,1516695011.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:11.463Z,1516695011.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:10:11.464Z,1516695011.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:11.862Z,1516695011.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:10:11.863Z,1516695011.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:12.232Z,1516695012.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:10:12.233Z,1516695012.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:12.665Z,1516695012.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:10:12.665Z,1516695012.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:13.068Z,1516695013.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:10:13.069Z,1516695013.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:13.445Z,1516695013.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:10:13.446Z,1516695013.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:13.840Z,1516695013.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:10:13.841Z,1516695013.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:14.246Z,1516695014.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:10:14.247Z,1516695014.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:14.670Z,1516695014.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:10:14.675Z,1516695014.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:15.053Z,1516695015.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:10:15.054Z,1516695015.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:15.445Z,1516695015.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:10:15.446Z,1516695015.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:15.842Z,1516695015.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:10:15.843Z,1516695015.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:16.252Z,1516695016.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:10:16.253Z,1516695016.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:16.656Z,1516695016.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:10:16.657Z,1516695016.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:17.052Z,1516695017.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:10:17.053Z,1516695017.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:17.452Z,1516695017.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:10:17.453Z,1516695017.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:17.844Z,1516695017.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:10:17.845Z,1516695017.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:18.242Z,1516695018.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:10:18.243Z,1516695018.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:18.661Z,1516695018.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:10:18.662Z,1516695018.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:19.054Z,1516695019.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:10:19.055Z,1516695019.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:19.454Z,1516695019.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:10:19.459Z,1516695019.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:19.852Z,1516695019.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:10:19.852Z,1516695019.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:20.248Z,1516695020.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:10:20.249Z,1516695020.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:20.654Z,1516695020.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:10:20.656Z,1516695020.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:21.057Z,1516695021.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:10:21.058Z,1516695021.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:21.458Z,1516695021.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:10:21.463Z,1516695021.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:21.848Z,1516695021.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:10:21.849Z,1516695021.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:22.251Z,1516695022.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:10:22.252Z,1516695022.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:22.656Z,1516695022.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:10:22.657Z,1516695022.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:23.057Z,1516695023.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:10:23.058Z,1516695023.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:23.468Z,1516695023.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:23.858Z,1516695023.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:26.926Z,1516695026.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:27.045Z,1516695027.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:27.454Z,1516695027.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:27.856Z,1516695027.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:28.256Z,1516695028.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:28.636Z,1516695028.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:29.034Z,1516695029.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:29.438Z,1516695029.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:29.850Z,1516695029.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:30.241Z,1516695030.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:30.642Z,1516695030.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:31.041Z,1516695031.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:31.442Z,1516695031.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:31.845Z,1516695031.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:32.242Z,1516695032.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:32.645Z,1516695032.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:33.061Z,1516695033.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:33.449Z,1516695033.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:33.853Z,1516695033.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:34.250Z,1516695034.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:34.647Z,1516695034.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:35.049Z,1516695035.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:35.429Z,1516695035.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:35.852Z,1516695035.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:36.257Z,1516695036.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:36.653Z,1516695036.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:37.056Z,1516695037.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:37.431Z,1516695037.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:37.835Z,1516695037.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:38.236Z,1516695038.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:38.633Z,1516695038.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:39.036Z,1516695039.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:39.478Z,1516695039.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:39.841Z,1516695039.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:40.242Z,1516695040.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:40.647Z,1516695040.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:41.054Z,1516695041.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:41.451Z,1516695041.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:41.866Z,1516695041.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:42.253Z,1516695042.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:42.657Z,1516695042.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:43.042Z,1516695043.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:43.441Z,1516695043.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:43.843Z,1516695043.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:44.226Z,1516695044.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:44.625Z,1516695044.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:45.054Z,1516695045.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:45.451Z,1516695045.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:45.854Z,1516695045.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:46.265Z,1516695046.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:46.641Z,1516695046.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:47.069Z,1516695047.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:47.470Z,1516695047.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:47.881Z,1516695047.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:48.257Z,1516695048.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:48.659Z,1516695048.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:49.047Z,1516695049.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:49.446Z,1516695049.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:49.857Z,1516695049.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:50.272Z,1516695050.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:50.624Z,1516695050.624 [PNI_TCM](ERROR): CRC does not match. Expected:0x30732 got:0x15560 2018-01-23T08:10:50.653Z,1516695050.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:51.061Z,1516695051.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:51.480Z,1516695051.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:51.858Z,1516695051.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:52.236Z,1516695052.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:52.632Z,1516695052.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:53.034Z,1516695053.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:53.456Z,1516695053.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:53.831Z,1516695053.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x13925 got:0x6466 2018-01-23T08:10:53.868Z,1516695053.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:54.259Z,1516695054.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:54.642Z,1516695054.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:55.041Z,1516695055.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:55.435Z,1516695055.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:55.845Z,1516695055.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:56.239Z,1516695056.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:56.660Z,1516695056.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:57.044Z,1516695057.044 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T08:10:57.073Z,1516695057.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:57.440Z,1516695057.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:57.841Z,1516695057.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:58.249Z,1516695058.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:58.635Z,1516695058.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:59.037Z,1516695059.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:59.444Z,1516695059.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:10:59.862Z,1516695059.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:00.241Z,1516695060.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:00.638Z,1516695060.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:01.114Z,1516695061.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:01.467Z,1516695061.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:01.839Z,1516695061.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:02.240Z,1516695062.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:02.634Z,1516695062.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:03.066Z,1516695063.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:03.449Z,1516695063.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:03.891Z,1516695063.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:04.234Z,1516695064.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:04.651Z,1516695064.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:05.037Z,1516695065.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:05.445Z,1516695065.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:05.849Z,1516695065.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:06.269Z,1516695066.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:06.648Z,1516695066.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:07.036Z,1516695067.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:07.442Z,1516695067.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:07.858Z,1516695067.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:08.235Z,1516695068.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:08.641Z,1516695068.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:09.053Z,1516695069.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:09.471Z,1516695069.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:09.850Z,1516695069.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:10.240Z,1516695070.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:10.655Z,1516695070.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:11.038Z,1516695071.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:11.442Z,1516695071.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:11.849Z,1516695071.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:12.250Z,1516695072.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:12.675Z,1516695072.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:13.038Z,1516695073.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:13.447Z,1516695073.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:13.844Z,1516695073.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:14.245Z,1516695074.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:14.633Z,1516695074.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:15.049Z,1516695075.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:15.451Z,1516695075.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:15.878Z,1516695075.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:16.238Z,1516695076.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:16.635Z,1516695076.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:17.047Z,1516695077.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:17.445Z,1516695077.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:17.843Z,1516695077.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:18.252Z,1516695078.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:18.646Z,1516695078.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:19.034Z,1516695079.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:19.437Z,1516695079.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:19.839Z,1516695079.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:20.242Z,1516695080.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:20.641Z,1516695080.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:20.992Z,1516695080.992 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:11:20.992Z,1516695080.992 [NAL9602] Data Fault, FailCount= 2 2018-01-23T08:11:20.992Z,1516695080.992 [NAL9602](ERROR): Data Fault 2018-01-23T08:11:21.049Z,1516695081.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:21.082Z,1516695081.082 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:11:21.392Z,1516695081.392 [NAL9602](INFO): Powering down 2018-01-23T08:11:21.440Z,1516695081.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:21.834Z,1516695081.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:22.247Z,1516695082.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:22.250Z,1516695082.250 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:06:21.9Z 2018-01-23T08:11:22.250Z,1516695082.250 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:11:22.251Z,1516695082.251 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:11:22.261Z,1516695082.261 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:11:22.261Z,1516695082.261 [NAL9602] No Fault, FailCount= 2 2018-01-23T08:11:22.649Z,1516695082.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:23.181Z,1516695083.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:23.456Z,1516695083.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:26.521Z,1516695086.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:26.595Z,1516695086.595 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0116.lzma 2018-01-23T08:11:26.666Z,1516695086.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:27.017Z,1516695087.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:27.373Z,1516695087.373 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0116.lzma.bak 2018-01-23T08:11:27.373Z,1516695087.373 [DataOverHttps](INFO): SBD MOMSN=7755259 2018-01-23T08:11:27.427Z,1516695087.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:28.121Z,1516695088.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:28.256Z,1516695088.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:31.307Z,1516695091.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:31.445Z,1516695091.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:31.778Z,1516695091.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:32.176Z,1516695092.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:32.575Z,1516695092.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:32.976Z,1516695092.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:36.058Z,1516695096.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:36.148Z,1516695096.148 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0117.lzma 2018-01-23T08:11:36.211Z,1516695096.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:36.523Z,1516695096.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:36.881Z,1516695096.881 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0117.lzma.bak 2018-01-23T08:11:36.881Z,1516695096.881 [DataOverHttps](INFO): SBD MOMSN=7755261 2018-01-23T08:11:36.936Z,1516695096.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:37.562Z,1516695097.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:37.565Z,1516695097.565 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:11:37.565Z,1516695097.565 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:11:37.565Z,1516695097.565 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:11:37.756Z,1516695097.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:40.813Z,1516695100.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:40.961Z,1516695100.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:41.280Z,1516695101.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:41.680Z,1516695101.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:42.076Z,1516695102.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:42.484Z,1516695102.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:42.879Z,1516695102.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:43.276Z,1516695103.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:43.678Z,1516695103.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:44.077Z,1516695104.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:44.476Z,1516695104.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:44.877Z,1516695104.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:45.277Z,1516695105.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:45.678Z,1516695105.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:46.077Z,1516695106.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:46.484Z,1516695106.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:46.876Z,1516695106.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:47.325Z,1516695107.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:47.679Z,1516695107.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:48.076Z,1516695108.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:48.483Z,1516695108.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:48.877Z,1516695108.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:49.277Z,1516695109.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:49.677Z,1516695109.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:50.074Z,1516695110.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:50.473Z,1516695110.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:50.871Z,1516695110.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:51.274Z,1516695111.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:51.642Z,1516695111.642 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:11:51.674Z,1516695111.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:52.076Z,1516695112.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:52.472Z,1516695112.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:52.925Z,1516695112.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:53.286Z,1516695113.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:53.688Z,1516695113.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:54.076Z,1516695114.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:54.484Z,1516695114.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:54.878Z,1516695114.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:55.276Z,1516695115.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:55.684Z,1516695115.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:56.089Z,1516695116.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:56.476Z,1516695116.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:56.885Z,1516695116.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:57.283Z,1516695117.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:57.679Z,1516695117.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:58.078Z,1516695118.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:58.479Z,1516695118.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:58.879Z,1516695118.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:59.277Z,1516695119.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:11:59.685Z,1516695119.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:00.076Z,1516695120.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:00.484Z,1516695120.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:00.883Z,1516695120.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:01.278Z,1516695121.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:01.678Z,1516695121.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:02.079Z,1516695122.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:02.489Z,1516695122.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:02.840Z,1516695122.840 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:12:02.885Z,1516695122.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:03.279Z,1516695123.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:03.697Z,1516695123.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:04.093Z,1516695124.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:04.489Z,1516695124.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:04.880Z,1516695124.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:05.284Z,1516695125.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:05.684Z,1516695125.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:06.080Z,1516695126.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:06.489Z,1516695126.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:06.893Z,1516695126.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:07.290Z,1516695127.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:07.683Z,1516695127.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:08.091Z,1516695128.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:08.481Z,1516695128.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:08.893Z,1516695128.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:09.285Z,1516695129.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:09.694Z,1516695129.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:10.094Z,1516695130.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:10.490Z,1516695130.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:10.882Z,1516695130.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:11.293Z,1516695131.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:11.687Z,1516695131.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:12.094Z,1516695132.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:12.501Z,1516695132.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:12.899Z,1516695132.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:13.292Z,1516695133.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:13.690Z,1516695133.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:14.096Z,1516695134.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:14.492Z,1516695134.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:14.890Z,1516695134.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:15.281Z,1516695135.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:15.693Z,1516695135.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:16.098Z,1516695136.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:16.492Z,1516695136.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:16.891Z,1516695136.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:17.292Z,1516695137.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:17.692Z,1516695137.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:18.083Z,1516695138.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:18.497Z,1516695138.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:18.905Z,1516695138.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:19.297Z,1516695139.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:19.697Z,1516695139.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:20.075Z,1516695140.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:20.475Z,1516695140.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:20.880Z,1516695140.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:21.275Z,1516695141.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:21.706Z,1516695141.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:22.109Z,1516695142.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:22.488Z,1516695142.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:22.880Z,1516695142.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:23.285Z,1516695143.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:23.679Z,1516695143.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:24.080Z,1516695144.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:24.489Z,1516695144.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:24.885Z,1516695144.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:25.285Z,1516695145.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:25.680Z,1516695145.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:26.078Z,1516695146.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:26.484Z,1516695146.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:26.885Z,1516695146.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:27.278Z,1516695147.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:27.694Z,1516695147.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:28.086Z,1516695148.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:28.485Z,1516695148.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:28.884Z,1516695148.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:29.278Z,1516695149.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:29.679Z,1516695149.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:30.080Z,1516695150.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:30.489Z,1516695150.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:30.885Z,1516695150.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:31.286Z,1516695151.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:31.678Z,1516695151.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:32.078Z,1516695152.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:32.481Z,1516695152.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:32.881Z,1516695152.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:33.278Z,1516695153.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:33.686Z,1516695153.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:34.086Z,1516695154.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:34.484Z,1516695154.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:34.880Z,1516695154.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:35.278Z,1516695155.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:35.679Z,1516695155.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:36.081Z,1516695156.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:36.493Z,1516695156.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:36.885Z,1516695156.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:37.285Z,1516695157.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:37.680Z,1516695157.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:38.080Z,1516695158.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:41.171Z,1516695161.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:41.293Z,1516695161.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:41.643Z,1516695161.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:42.066Z,1516695162.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:42.466Z,1516695162.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:42.846Z,1516695162.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:43.247Z,1516695163.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:43.644Z,1516695163.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:44.046Z,1516695164.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:44.458Z,1516695164.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:44.857Z,1516695164.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:45.250Z,1516695165.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:45.649Z,1516695165.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:46.046Z,1516695166.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:46.453Z,1516695166.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:46.843Z,1516695166.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:47.253Z,1516695167.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:47.664Z,1516695167.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:48.061Z,1516695168.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:48.455Z,1516695168.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:48.851Z,1516695168.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:49.244Z,1516695169.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:49.650Z,1516695169.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:50.048Z,1516695170.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:50.457Z,1516695170.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:50.857Z,1516695170.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:51.261Z,1516695171.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:51.643Z,1516695171.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:52.052Z,1516695172.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:52.448Z,1516695172.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:52.845Z,1516695172.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:53.249Z,1516695173.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:53.661Z,1516695173.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:54.054Z,1516695174.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:54.454Z,1516695174.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:54.849Z,1516695174.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:55.245Z,1516695175.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:55.653Z,1516695175.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:56.049Z,1516695176.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:56.454Z,1516695176.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:56.864Z,1516695176.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:57.253Z,1516695177.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:57.652Z,1516695177.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:58.053Z,1516695178.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:58.453Z,1516695178.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:58.854Z,1516695178.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:59.254Z,1516695179.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:12:59.657Z,1516695179.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:00.052Z,1516695180.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:00.440Z,1516695180.440 [PNI_TCM](ERROR): CRC does not match. Expected:0x33185 got:0x54301 2018-01-23T08:13:00.468Z,1516695180.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:00.844Z,1516695180.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:01.246Z,1516695181.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:01.656Z,1516695181.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:02.054Z,1516695182.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:02.457Z,1516695182.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:02.849Z,1516695182.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:03.252Z,1516695183.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:03.646Z,1516695183.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:04.051Z,1516695184.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:04.455Z,1516695184.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:04.456Z,1516695184.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-01-23T08:13:04.456Z,1516695184.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:13:04.457Z,1516695184.457 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:04.458Z,1516695184.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-01-23T08:13:04.458Z,1516695184.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:13:04.459Z,1516695184.459 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:04.460Z,1516695184.460 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99 2018-01-23T08:13:04.460Z,1516695184.460 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:13:04.472Z,1516695184.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:13:04.472Z,1516695184.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:13:04.472Z,1516695184.472 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:13:04.867Z,1516695184.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:13:04.867Z,1516695184.867 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-01-23T08:13:04.868Z,1516695184.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:13:04.868Z,1516695184.868 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-01-23T08:13:04.868Z,1516695184.868 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:13:04.868Z,1516695184.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99 2018-01-23T08:13:05.253Z,1516695185.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:13:05.253Z,1516695185.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:13:05.253Z,1516695185.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:13:05.254Z,1516695185.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:13:05.254Z,1516695185.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:13:05.254Z,1516695185.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:13:05.255Z,1516695185.255 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:13:05.256Z,1516695185.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:13:05.256Z,1516695185.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:13:05.649Z,1516695185.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:13:05.650Z,1516695185.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:06.033Z,1516695186.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:13:06.034Z,1516695186.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:06.462Z,1516695186.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:13:06.463Z,1516695186.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:06.872Z,1516695186.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:13:06.873Z,1516695186.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:07.264Z,1516695187.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:13:07.265Z,1516695187.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:07.668Z,1516695187.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:13:07.669Z,1516695187.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:08.068Z,1516695188.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:13:08.069Z,1516695188.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:08.440Z,1516695188.440 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T08:13:08.464Z,1516695188.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:13:08.465Z,1516695188.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:08.872Z,1516695188.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:13:08.873Z,1516695188.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:09.272Z,1516695189.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:13:09.273Z,1516695189.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:09.660Z,1516695189.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:13:09.661Z,1516695189.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:10.042Z,1516695190.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:13:10.063Z,1516695190.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:10.465Z,1516695190.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:13:10.466Z,1516695190.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:10.866Z,1516695190.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:13:10.867Z,1516695190.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:11.265Z,1516695191.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:13:11.266Z,1516695191.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:11.640Z,1516695191.640 [PNI_TCM](ERROR): CRC does not match. Expected:0x65522 got:0x32768 2018-01-23T08:13:11.672Z,1516695191.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:13:11.673Z,1516695191.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:12.044Z,1516695192.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:13:12.045Z,1516695192.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:12.466Z,1516695192.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:13:12.471Z,1516695192.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:12.867Z,1516695192.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:13:12.868Z,1516695192.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:13.272Z,1516695193.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:13:13.273Z,1516695193.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:13.642Z,1516695193.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:13:13.643Z,1516695193.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:14.044Z,1516695194.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:13:14.045Z,1516695194.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:14.461Z,1516695194.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:13:14.462Z,1516695194.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:14.846Z,1516695194.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x32080 got:0x6466 2018-01-23T08:13:14.881Z,1516695194.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:13:14.882Z,1516695194.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:15.256Z,1516695195.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:13:15.257Z,1516695195.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:15.649Z,1516695195.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:13:15.650Z,1516695195.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:16.061Z,1516695196.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:13:16.061Z,1516695196.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:16.456Z,1516695196.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:13:16.457Z,1516695196.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:16.856Z,1516695196.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:13:16.857Z,1516695196.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:17.256Z,1516695197.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:13:17.257Z,1516695197.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:17.661Z,1516695197.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:13:17.662Z,1516695197.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:18.049Z,1516695198.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:13:18.050Z,1516695198.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:18.457Z,1516695198.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:13:18.458Z,1516695198.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:18.854Z,1516695198.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:13:18.855Z,1516695198.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:19.260Z,1516695199.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:13:19.261Z,1516695199.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:19.644Z,1516695199.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:13:19.645Z,1516695199.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:20.052Z,1516695200.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:13:20.053Z,1516695200.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:20.455Z,1516695200.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:13:20.456Z,1516695200.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:20.872Z,1516695200.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:13:20.873Z,1516695200.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:21.253Z,1516695201.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:13:21.254Z,1516695201.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:21.656Z,1516695201.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:13:21.657Z,1516695201.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:22.053Z,1516695202.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:13:22.054Z,1516695202.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:22.455Z,1516695202.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:13:22.456Z,1516695202.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:22.859Z,1516695202.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:13:22.860Z,1516695202.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:23.258Z,1516695203.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:13:23.259Z,1516695203.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:23.650Z,1516695203.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:13:23.651Z,1516695203.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:24.052Z,1516695204.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:13:24.053Z,1516695204.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:24.458Z,1516695204.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:24.862Z,1516695204.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:25.256Z,1516695205.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:25.645Z,1516695205.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:26.054Z,1516695206.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:26.463Z,1516695206.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:26.865Z,1516695206.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:27.281Z,1516695207.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:27.640Z,1516695207.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:28.040Z,1516695208.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:28.470Z,1516695208.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:28.872Z,1516695208.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:29.243Z,1516695209.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:29.639Z,1516695209.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:30.042Z,1516695210.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:30.443Z,1516695210.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:30.846Z,1516695210.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:31.251Z,1516695211.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:31.649Z,1516695211.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:32.040Z,1516695212.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:32.457Z,1516695212.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:32.851Z,1516695212.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:33.252Z,1516695213.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:33.662Z,1516695213.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:34.039Z,1516695214.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:34.458Z,1516695214.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:34.856Z,1516695214.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:35.249Z,1516695215.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:35.642Z,1516695215.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:36.044Z,1516695216.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:36.452Z,1516695216.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:36.857Z,1516695216.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:37.260Z,1516695217.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:37.637Z,1516695217.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:38.040Z,1516695218.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:38.438Z,1516695218.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:41.564Z,1516695221.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:41.716Z,1516695221.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:42.065Z,1516695222.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:42.436Z,1516695222.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:42.833Z,1516695222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:43.230Z,1516695223.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:43.645Z,1516695223.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:44.042Z,1516695224.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:44.437Z,1516695224.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:44.831Z,1516695224.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:45.235Z,1516695225.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:45.637Z,1516695225.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:46.032Z,1516695226.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:46.435Z,1516695226.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:46.841Z,1516695226.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:47.236Z,1516695227.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:47.688Z,1516695227.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:48.031Z,1516695228.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:48.431Z,1516695228.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:48.833Z,1516695228.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:49.231Z,1516695229.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:49.645Z,1516695229.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:50.042Z,1516695230.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:50.441Z,1516695230.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:50.831Z,1516695230.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:51.237Z,1516695231.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:51.631Z,1516695231.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:52.032Z,1516695232.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:52.437Z,1516695232.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:52.837Z,1516695232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:53.237Z,1516695233.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:53.641Z,1516695233.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:54.031Z,1516695234.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:54.431Z,1516695234.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:54.841Z,1516695234.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:55.234Z,1516695235.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:55.637Z,1516695235.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:56.038Z,1516695236.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:56.441Z,1516695236.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:56.832Z,1516695236.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:57.235Z,1516695237.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:57.631Z,1516695237.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:58.033Z,1516695238.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:58.435Z,1516695238.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:58.841Z,1516695238.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:59.244Z,1516695239.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:13:59.642Z,1516695239.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:00.033Z,1516695240.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:00.434Z,1516695240.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:00.834Z,1516695240.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:01.238Z,1516695241.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:01.641Z,1516695241.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:02.045Z,1516695242.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:02.442Z,1516695242.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:02.835Z,1516695242.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:03.233Z,1516695243.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:03.639Z,1516695243.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:04.036Z,1516695244.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:04.441Z,1516695244.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:04.847Z,1516695244.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:05.248Z,1516695245.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:05.655Z,1516695245.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:06.040Z,1516695246.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:06.446Z,1516695246.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:06.835Z,1516695246.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:07.241Z,1516695247.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:07.642Z,1516695247.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:08.041Z,1516695248.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:08.448Z,1516695248.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:08.834Z,1516695248.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:09.244Z,1516695249.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:09.641Z,1516695249.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:10.041Z,1516695250.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:10.429Z,1516695250.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:10.850Z,1516695250.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:11.247Z,1516695251.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:11.653Z,1516695251.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:12.043Z,1516695252.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:12.444Z,1516695252.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:12.843Z,1516695252.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:13.243Z,1516695253.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:13.657Z,1516695253.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:14.051Z,1516695254.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:14.449Z,1516695254.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:14.845Z,1516695254.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:15.221Z,1516695255.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:15.645Z,1516695255.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:16.023Z,1516695256.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:16.425Z,1516695256.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:16.861Z,1516695256.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:17.255Z,1516695257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:17.654Z,1516695257.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:18.037Z,1516695258.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:18.070Z,1516695258.070 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:14:18.430Z,1516695258.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:18.832Z,1516695258.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:19.231Z,1516695259.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:19.638Z,1516695259.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:20.034Z,1516695260.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:20.438Z,1516695260.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:20.832Z,1516695260.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:21.229Z,1516695261.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:21.637Z,1516695261.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:22.032Z,1516695262.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:22.430Z,1516695262.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:22.841Z,1516695262.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:23.241Z,1516695263.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:23.648Z,1516695263.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:24.034Z,1516695264.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:24.431Z,1516695264.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:24.833Z,1516695264.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:25.234Z,1516695265.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:25.643Z,1516695265.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:26.053Z,1516695266.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:26.449Z,1516695266.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:26.835Z,1516695266.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:27.231Z,1516695267.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:27.633Z,1516695267.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:28.036Z,1516695268.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:28.430Z,1516695268.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:28.841Z,1516695268.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:29.252Z,1516695269.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:29.641Z,1516695269.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:30.034Z,1516695270.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:30.436Z,1516695270.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:30.836Z,1516695270.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:31.232Z,1516695271.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:31.642Z,1516695271.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:32.045Z,1516695272.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:32.449Z,1516695272.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:32.835Z,1516695272.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:33.230Z,1516695273.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:33.640Z,1516695273.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:34.036Z,1516695274.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:34.429Z,1516695274.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:34.842Z,1516695274.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:35.246Z,1516695275.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:35.642Z,1516695275.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:36.041Z,1516695276.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:36.443Z,1516695276.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:36.835Z,1516695276.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:37.240Z,1516695277.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:37.643Z,1516695277.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:38.045Z,1516695278.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:38.450Z,1516695278.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:38.838Z,1516695278.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:41.929Z,1516695281.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:42.089Z,1516695282.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:42.405Z,1516695282.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:42.809Z,1516695282.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:43.216Z,1516695283.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:43.602Z,1516695283.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:43.999Z,1516695283.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:44.404Z,1516695284.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:44.817Z,1516695284.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:45.210Z,1516695285.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:45.606Z,1516695285.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:46.003Z,1516695286.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:46.405Z,1516695286.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:46.798Z,1516695286.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:47.203Z,1516695287.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:47.611Z,1516695287.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:48.009Z,1516695288.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:48.414Z,1516695288.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:48.804Z,1516695288.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:49.193Z,1516695289.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:49.610Z,1516695289.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:50.020Z,1516695290.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:50.415Z,1516695290.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:50.800Z,1516695290.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:51.187Z,1516695291.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:51.614Z,1516695291.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:52.025Z,1516695292.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:52.420Z,1516695292.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:52.796Z,1516695292.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:53.195Z,1516695293.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:53.621Z,1516695293.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:54.002Z,1516695294.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:54.426Z,1516695294.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:54.795Z,1516695294.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:55.197Z,1516695295.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:55.610Z,1516695295.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:56.005Z,1516695296.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:56.405Z,1516695296.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:56.798Z,1516695296.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:57.195Z,1516695297.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:57.605Z,1516695297.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:58.009Z,1516695298.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:58.412Z,1516695298.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:58.800Z,1516695298.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:59.195Z,1516695299.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:14:59.612Z,1516695299.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:00.009Z,1516695300.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:00.405Z,1516695300.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:00.796Z,1516695300.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:01.194Z,1516695301.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:01.605Z,1516695301.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:02.012Z,1516695302.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:02.405Z,1516695302.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:02.797Z,1516695302.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:03.195Z,1516695303.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:03.605Z,1516695303.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:04.009Z,1516695304.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:04.405Z,1516695304.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:04.800Z,1516695304.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:05.194Z,1516695305.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:05.612Z,1516695305.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:06.005Z,1516695306.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:06.426Z,1516695306.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:06.800Z,1516695306.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:07.195Z,1516695307.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:07.615Z,1516695307.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:08.008Z,1516695308.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:08.406Z,1516695308.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:08.798Z,1516695308.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:09.205Z,1516695309.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:09.606Z,1516695309.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:10.009Z,1516695310.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:10.409Z,1516695310.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:10.797Z,1516695310.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:11.198Z,1516695311.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:11.606Z,1516695311.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:12.012Z,1516695312.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:12.406Z,1516695312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:12.799Z,1516695312.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:13.204Z,1516695313.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:13.613Z,1516695313.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:14.014Z,1516695314.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:14.409Z,1516695314.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:14.805Z,1516695314.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:15.188Z,1516695315.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:15.614Z,1516695315.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:16.020Z,1516695316.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:16.417Z,1516695316.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:16.790Z,1516695316.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:17.197Z,1516695317.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:17.624Z,1516695317.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:18.023Z,1516695318.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:18.404Z,1516695318.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:18.802Z,1516695318.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:19.204Z,1516695319.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:19.600Z,1516695319.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:20.007Z,1516695320.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:20.411Z,1516695320.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:20.809Z,1516695320.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:21.205Z,1516695321.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:21.602Z,1516695321.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:22.004Z,1516695322.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:22.399Z,1516695322.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:22.806Z,1516695322.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:23.209Z,1516695323.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:23.606Z,1516695323.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:23.997Z,1516695323.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:24.405Z,1516695324.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:24.798Z,1516695324.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:25.198Z,1516695325.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:25.605Z,1516695325.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:26.007Z,1516695326.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:26.410Z,1516695326.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:26.816Z,1516695326.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:27.202Z,1516695327.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:27.605Z,1516695327.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:28.000Z,1516695328.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:28.408Z,1516695328.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:28.809Z,1516695328.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:29.210Z,1516695329.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:29.617Z,1516695329.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:29.985Z,1516695329.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:30.409Z,1516695330.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:30.787Z,1516695330.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:31.190Z,1516695331.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:31.619Z,1516695331.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:32.023Z,1516695332.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:32.398Z,1516695332.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:32.824Z,1516695332.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:33.199Z,1516695333.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:33.601Z,1516695333.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:33.997Z,1516695333.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:34.394Z,1516695334.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:34.806Z,1516695334.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:35.202Z,1516695335.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:35.598Z,1516695335.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:35.992Z,1516695335.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:36.405Z,1516695336.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:36.800Z,1516695336.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:37.193Z,1516695337.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:37.601Z,1516695337.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:38.012Z,1516695338.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:38.406Z,1516695338.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:38.805Z,1516695338.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:39.197Z,1516695339.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:44.538Z,1516695344.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:44.676Z,1516695344.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:45.045Z,1516695345.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:45.450Z,1516695345.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:45.817Z,1516695345.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:46.267Z,1516695346.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:46.659Z,1516695346.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:47.078Z,1516695347.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:47.476Z,1516695347.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:47.870Z,1516695347.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:48.237Z,1516695348.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:48.649Z,1516695348.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:49.032Z,1516695349.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:49.435Z,1516695349.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:49.845Z,1516695349.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:50.221Z,1516695350.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:50.614Z,1516695350.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:51.053Z,1516695351.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:51.450Z,1516695351.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:51.826Z,1516695351.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:52.220Z,1516695352.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:52.613Z,1516695352.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:53.010Z,1516695353.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:53.409Z,1516695353.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:53.825Z,1516695353.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:54.218Z,1516695354.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:54.625Z,1516695354.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:55.013Z,1516695355.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:55.401Z,1516695355.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:55.816Z,1516695355.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:56.217Z,1516695356.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:56.624Z,1516695356.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:57.025Z,1516695357.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:57.429Z,1516695357.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:57.824Z,1516695357.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:58.215Z,1516695358.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:58.619Z,1516695358.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:58.996Z,1516695358.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:59.401Z,1516695359.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:15:59.832Z,1516695359.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:00.226Z,1516695360.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:00.630Z,1516695360.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:01.005Z,1516695361.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:01.405Z,1516695361.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:01.805Z,1516695361.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:02.206Z,1516695362.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:02.603Z,1516695362.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:03.006Z,1516695363.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:03.410Z,1516695363.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:03.818Z,1516695363.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:04.207Z,1516695364.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:04.609Z,1516695364.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:05.005Z,1516695365.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:05.408Z,1516695365.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:05.408Z,1516695365.408 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-01-23T08:16:05.409Z,1516695365.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:16:05.410Z,1516695365.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:05.410Z,1516695365.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-01-23T08:16:05.411Z,1516695365.411 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:16:05.412Z,1516695365.412 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:05.412Z,1516695365.412 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100 2018-01-23T08:16:05.413Z,1516695365.413 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:16:05.441Z,1516695365.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:16:05.441Z,1516695365.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:16:05.441Z,1516695365.441 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:16:05.840Z,1516695365.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:16:05.840Z,1516695365.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-01-23T08:16:05.840Z,1516695365.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:16:05.840Z,1516695365.840 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-01-23T08:16:05.841Z,1516695365.841 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:16:05.841Z,1516695365.841 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100 2018-01-23T08:16:06.221Z,1516695366.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:16:06.222Z,1516695366.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:16:06.222Z,1516695366.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:16:06.222Z,1516695366.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:16:06.227Z,1516695366.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:16:06.227Z,1516695366.227 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:16:06.228Z,1516695366.228 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:16:06.228Z,1516695366.228 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:16:06.228Z,1516695366.228 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:16:06.614Z,1516695366.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:16:06.615Z,1516695366.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:07.017Z,1516695367.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:16:07.018Z,1516695367.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:07.411Z,1516695367.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:16:07.412Z,1516695367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:07.811Z,1516695367.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:16:07.812Z,1516695367.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:08.223Z,1516695368.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:16:08.224Z,1516695368.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:08.615Z,1516695368.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:16:08.616Z,1516695368.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:09.024Z,1516695369.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:16:09.025Z,1516695369.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:09.422Z,1516695369.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:16:09.423Z,1516695369.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:09.823Z,1516695369.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:16:09.824Z,1516695369.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:10.215Z,1516695370.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:16:10.216Z,1516695370.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:10.611Z,1516695370.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:16:10.612Z,1516695370.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:10.995Z,1516695370.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:16:10.996Z,1516695370.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:11.420Z,1516695371.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:16:11.421Z,1516695371.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:11.820Z,1516695371.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:16:11.821Z,1516695371.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:12.221Z,1516695372.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:16:12.222Z,1516695372.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:12.632Z,1516695372.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:16:12.633Z,1516695372.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:13.004Z,1516695373.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:16:13.005Z,1516695373.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:13.408Z,1516695373.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:16:13.409Z,1516695373.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:13.807Z,1516695373.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:16:13.808Z,1516695373.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:14.215Z,1516695374.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:16:14.216Z,1516695374.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:14.613Z,1516695374.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:16:14.614Z,1516695374.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:15.023Z,1516695375.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:16:15.024Z,1516695375.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:15.421Z,1516695375.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:16:15.422Z,1516695375.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:15.816Z,1516695375.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:16:15.817Z,1516695375.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:16.213Z,1516695376.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:16:16.214Z,1516695376.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:16.619Z,1516695376.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:16:16.620Z,1516695376.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:17.013Z,1516695377.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:16:17.014Z,1516695377.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:17.417Z,1516695377.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:16:17.417Z,1516695377.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:17.822Z,1516695377.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:16:17.823Z,1516695377.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:18.229Z,1516695378.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:16:18.229Z,1516695378.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:18.621Z,1516695378.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:16:18.622Z,1516695378.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:19.013Z,1516695379.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:16:19.014Z,1516695379.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:19.418Z,1516695379.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:16:19.423Z,1516695379.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:19.801Z,1516695379.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:16:19.802Z,1516695379.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:20.203Z,1516695380.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:16:20.204Z,1516695380.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:20.609Z,1516695380.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:16:20.610Z,1516695380.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:21.010Z,1516695381.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:16:21.011Z,1516695381.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:21.417Z,1516695381.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:16:21.418Z,1516695381.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:21.806Z,1516695381.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:16:21.807Z,1516695381.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:22.202Z,1516695382.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:16:22.203Z,1516695382.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:22.608Z,1516695382.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:16:22.609Z,1516695382.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:23.004Z,1516695383.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:16:23.005Z,1516695383.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:23.404Z,1516695383.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:16:23.404Z,1516695383.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:23.820Z,1516695383.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:16:23.821Z,1516695383.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:24.221Z,1516695384.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:16:24.221Z,1516695384.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:24.622Z,1516695384.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:16:24.623Z,1516695384.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:25.024Z,1516695385.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:16:25.025Z,1516695385.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:25.420Z,1516695385.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:25.817Z,1516695385.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:26.199Z,1516695386.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:26.626Z,1516695386.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:27.026Z,1516695387.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:27.428Z,1516695387.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:27.825Z,1516695387.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:28.201Z,1516695388.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:28.603Z,1516695388.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:29.004Z,1516695389.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:29.405Z,1516695389.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:29.810Z,1516695389.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:30.214Z,1516695390.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:30.618Z,1516695390.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:31.004Z,1516695391.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:31.408Z,1516695391.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:31.803Z,1516695391.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:32.208Z,1516695392.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:32.607Z,1516695392.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:33.013Z,1516695393.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:33.408Z,1516695393.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:33.809Z,1516695393.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:34.204Z,1516695394.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:34.604Z,1516695394.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:35.005Z,1516695395.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:35.403Z,1516695395.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:35.817Z,1516695395.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:36.210Z,1516695396.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:36.613Z,1516695396.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:37.004Z,1516695397.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:37.403Z,1516695397.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:37.816Z,1516695397.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:37.819Z,1516695397.819 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:16:37.819Z,1516695397.819 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:16:37.819Z,1516695397.819 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:16:37.819Z,1516695397.819 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:16:38.205Z,1516695398.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:38.208Z,1516695398.208 [Default:CheckIn:D] Stopped 2018-01-23T08:16:38.208Z,1516695398.208 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:16:38.609Z,1516695398.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:38.612Z,1516695398.612 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 298.769141 min 2018-01-23T08:16:38.612Z,1516695398.612 [Default:CheckIn:E] Stopped 2018-01-23T08:16:38.612Z,1516695398.612 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn] Stopped 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn](INFO): Running loop #30 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn] Running Loop=30 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:16:38.613Z,1516695398.613 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:16:39.021Z,1516695399.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:39.422Z,1516695399.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:42.521Z,1516695402.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:42.660Z,1516695402.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:43.018Z,1516695403.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:43.421Z,1516695403.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:43.819Z,1516695403.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:44.228Z,1516695404.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:44.622Z,1516695404.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:45.015Z,1516695405.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:45.413Z,1516695405.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:45.814Z,1516695405.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:46.209Z,1516695406.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:46.618Z,1516695406.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:47.022Z,1516695407.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:47.422Z,1516695407.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:47.820Z,1516695407.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:48.214Z,1516695408.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:48.615Z,1516695408.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:49.013Z,1516695409.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:49.420Z,1516695409.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:49.819Z,1516695409.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:50.222Z,1516695410.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:50.633Z,1516695410.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:51.020Z,1516695411.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:51.420Z,1516695411.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:51.821Z,1516695411.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:52.212Z,1516695412.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:52.627Z,1516695412.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:53.033Z,1516695413.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:53.432Z,1516695413.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:53.828Z,1516695413.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:54.198Z,1516695414.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:54.600Z,1516695414.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:55.004Z,1516695415.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:55.405Z,1516695415.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:55.835Z,1516695415.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:56.233Z,1516695416.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:56.632Z,1516695416.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:57.037Z,1516695417.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:57.409Z,1516695417.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:57.810Z,1516695417.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:58.209Z,1516695418.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:58.613Z,1516695418.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:59.017Z,1516695419.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:59.414Z,1516695419.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:16:59.810Z,1516695419.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:00.214Z,1516695420.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:00.607Z,1516695420.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:01.008Z,1516695421.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:01.407Z,1516695421.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:01.813Z,1516695421.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:02.225Z,1516695422.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:02.625Z,1516695422.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:03.012Z,1516695423.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:03.412Z,1516695423.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:03.822Z,1516695423.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:04.221Z,1516695424.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:04.625Z,1516695424.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:05.013Z,1516695425.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:05.407Z,1516695425.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:05.818Z,1516695425.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:06.217Z,1516695426.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:06.618Z,1516695426.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:07.009Z,1516695427.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:07.409Z,1516695427.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:07.818Z,1516695427.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:08.225Z,1516695428.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:08.622Z,1516695428.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:09.016Z,1516695429.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:09.412Z,1516695429.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:09.821Z,1516695429.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:10.222Z,1516695430.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:10.626Z,1516695430.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:11.013Z,1516695431.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:11.416Z,1516695431.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:11.818Z,1516695431.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:12.227Z,1516695432.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:12.617Z,1516695432.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:13.019Z,1516695433.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:13.409Z,1516695433.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:13.819Z,1516695433.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:14.225Z,1516695434.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:14.623Z,1516695434.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:15.016Z,1516695435.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:15.422Z,1516695435.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:15.823Z,1516695435.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:16.223Z,1516695436.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:16.625Z,1516695436.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:17.020Z,1516695437.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:17.419Z,1516695437.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:17.828Z,1516695437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:18.229Z,1516695438.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:18.625Z,1516695438.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:19.020Z,1516695439.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:19.397Z,1516695439.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:19.820Z,1516695439.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:20.224Z,1516695440.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:20.621Z,1516695440.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:21.025Z,1516695441.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:21.400Z,1516695441.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:21.825Z,1516695441.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:22.237Z,1516695442.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:22.637Z,1516695442.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:23.028Z,1516695443.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:23.409Z,1516695443.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:23.834Z,1516695443.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:24.210Z,1516695444.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:24.614Z,1516695444.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:25.009Z,1516695445.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:25.409Z,1516695445.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:25.814Z,1516695445.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:26.218Z,1516695446.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:26.622Z,1516695446.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:27.012Z,1516695447.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:27.409Z,1516695447.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:27.813Z,1516695447.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:28.214Z,1516695448.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:28.614Z,1516695448.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:29.010Z,1516695449.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:29.421Z,1516695449.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:29.818Z,1516695449.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:30.218Z,1516695450.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:30.619Z,1516695450.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:31.012Z,1516695451.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:31.417Z,1516695451.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:31.829Z,1516695451.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:32.223Z,1516695452.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:32.621Z,1516695452.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:33.018Z,1516695453.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:33.412Z,1516695453.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:33.826Z,1516695453.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:34.226Z,1516695454.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:34.630Z,1516695454.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:35.021Z,1516695455.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:35.420Z,1516695455.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:35.817Z,1516695455.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:36.233Z,1516695456.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:36.633Z,1516695456.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:37.022Z,1516695457.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:37.401Z,1516695457.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:37.803Z,1516695457.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:38.229Z,1516695458.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:38.604Z,1516695458.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:39.014Z,1516695459.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:39.413Z,1516695459.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:39.843Z,1516695459.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:42.914Z,1516695462.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:43.053Z,1516695463.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:43.418Z,1516695463.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:43.819Z,1516695463.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:44.214Z,1516695464.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:44.612Z,1516695464.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:45.008Z,1516695465.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:45.406Z,1516695465.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:45.801Z,1516695465.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:46.211Z,1516695466.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:46.625Z,1516695466.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:47.020Z,1516695467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:47.393Z,1516695467.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:47.817Z,1516695467.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:48.208Z,1516695468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:48.606Z,1516695468.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:49.018Z,1516695469.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:49.429Z,1516695469.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:49.815Z,1516695469.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:50.217Z,1516695470.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:50.616Z,1516695470.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:50.997Z,1516695470.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:51.412Z,1516695471.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:51.812Z,1516695471.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:52.214Z,1516695472.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:52.619Z,1516695472.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:53.017Z,1516695473.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:53.389Z,1516695473.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:53.819Z,1516695473.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:54.191Z,1516695474.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:54.595Z,1516695474.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:55.018Z,1516695475.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:55.418Z,1516695475.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:55.822Z,1516695475.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:56.225Z,1516695476.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:56.600Z,1516695476.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:56.997Z,1516695476.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:57.409Z,1516695477.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:57.800Z,1516695477.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:58.202Z,1516695478.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:58.614Z,1516695478.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:59.012Z,1516695479.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:59.394Z,1516695479.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:17:59.805Z,1516695479.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:00.202Z,1516695480.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:00.604Z,1516695480.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:01.006Z,1516695481.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:01.404Z,1516695481.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:01.806Z,1516695481.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:02.203Z,1516695482.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:02.602Z,1516695482.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:02.000Z,1516695483.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:03.413Z,1516695483.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:03.802Z,1516695483.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:04.210Z,1516695484.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:04.614Z,1516695484.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:05.012Z,1516695485.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:05.398Z,1516695485.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:05.807Z,1516695485.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:06.200Z,1516695486.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:06.605Z,1516695486.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:07.009Z,1516695487.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:07.409Z,1516695487.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:07.811Z,1516695487.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:08.205Z,1516695488.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:08.604Z,1516695488.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:08.000Z,1516695489.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:09.409Z,1516695489.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:09.800Z,1516695489.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:10.212Z,1516695490.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:10.615Z,1516695490.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:11.010Z,1516695491.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:11.401Z,1516695491.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:11.805Z,1516695491.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:12.201Z,1516695492.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:12.608Z,1516695492.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:13.017Z,1516695493.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:13.421Z,1516695493.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:13.816Z,1516695493.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:14.206Z,1516695494.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:14.608Z,1516695494.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:15.002Z,1516695495.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:15.404Z,1516695495.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:15.811Z,1516695495.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:16.213Z,1516695496.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:16.615Z,1516695496.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:17.009Z,1516695497.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:17.397Z,1516695497.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:17.801Z,1516695497.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:18.208Z,1516695498.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:18.606Z,1516695498.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:19.021Z,1516695499.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:19.425Z,1516695499.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:19.815Z,1516695499.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:20.213Z,1516695500.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:20.612Z,1516695500.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:21.008Z,1516695501.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:21.408Z,1516695501.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:21.801Z,1516695501.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:22.211Z,1516695502.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:22.617Z,1516695502.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:23.012Z,1516695503.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:23.408Z,1516695503.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:23.807Z,1516695503.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:24.210Z,1516695504.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:24.606Z,1516695504.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:25.018Z,1516695505.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:25.428Z,1516695505.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:25.809Z,1516695505.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:26.211Z,1516695506.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:26.616Z,1516695506.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:26.985Z,1516695506.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:27.392Z,1516695507.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:27.795Z,1516695507.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:28.197Z,1516695508.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:28.617Z,1516695508.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:29.020Z,1516695509.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:29.393Z,1516695509.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:29.796Z,1516695509.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:30.199Z,1516695510.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:30.599Z,1516695510.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:31.021Z,1516695511.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:31.428Z,1516695511.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:31.825Z,1516695511.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:32.197Z,1516695512.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:32.600Z,1516695512.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:32.994Z,1516695512.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:33.405Z,1516695513.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:33.805Z,1516695513.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:34.202Z,1516695514.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:34.630Z,1516695514.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:35.028Z,1516695515.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:35.394Z,1516695515.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:35.805Z,1516695515.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:36.209Z,1516695516.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:36.595Z,1516695516.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:37.030Z,1516695517.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:37.430Z,1516695517.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:37.829Z,1516695517.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:38.201Z,1516695518.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:38.613Z,1516695518.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:38.998Z,1516695518.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:39.409Z,1516695519.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:39.804Z,1516695519.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:40.207Z,1516695520.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:43.305Z,1516695523.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:43.446Z,1516695523.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:43.800Z,1516695523.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:44.201Z,1516695524.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:44.598Z,1516695524.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:45.006Z,1516695525.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:45.410Z,1516695525.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:45.803Z,1516695525.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:46.201Z,1516695526.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:46.599Z,1516695526.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:46.998Z,1516695526.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:47.398Z,1516695527.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:47.805Z,1516695527.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:48.213Z,1516695528.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:48.617Z,1516695528.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:49.013Z,1516695529.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:49.395Z,1516695529.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:49.784Z,1516695529.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:50.189Z,1516695530.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:50.592Z,1516695530.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:50.997Z,1516695530.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:51.400Z,1516695531.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:51.798Z,1516695531.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:52.198Z,1516695532.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:52.602Z,1516695532.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:52.991Z,1516695532.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:53.404Z,1516695533.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:53.800Z,1516695533.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:54.202Z,1516695534.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:54.604Z,1516695534.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:55.001Z,1516695535.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:55.398Z,1516695535.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:55.797Z,1516695535.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:56.195Z,1516695536.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:56.597Z,1516695536.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:57.006Z,1516695537.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:57.404Z,1516695537.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:57.804Z,1516695537.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:58.198Z,1516695538.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:58.601Z,1516695538.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:59.003Z,1516695539.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:59.415Z,1516695539.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:18:59.803Z,1516695539.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:00.193Z,1516695540.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:00.604Z,1516695540.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:01.006Z,1516695541.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:01.403Z,1516695541.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:01.803Z,1516695541.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:02.201Z,1516695542.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:02.597Z,1516695542.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:03.017Z,1516695543.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:03.421Z,1516695543.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:03.815Z,1516695543.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:04.215Z,1516695544.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:04.587Z,1516695544.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:05.010Z,1516695545.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:05.421Z,1516695545.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:05.796Z,1516695545.796 [PNI_TCM](ERROR): CRC does not match. Expected:0x13991 got:0x49716 2018-01-23T08:19:05.818Z,1516695545.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:06.190Z,1516695546.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:06.592Z,1516695546.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:06.593Z,1516695546.593 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101 2018-01-23T08:19:06.593Z,1516695546.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:19:06.594Z,1516695546.594 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:06.595Z,1516695546.595 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101 2018-01-23T08:19:06.595Z,1516695546.595 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:19:06.596Z,1516695546.596 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:06.597Z,1516695546.597 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101 2018-01-23T08:19:06.597Z,1516695546.597 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:19:06.633Z,1516695546.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:19:06.633Z,1516695546.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:19:06.633Z,1516695546.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:19:07.028Z,1516695547.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:19:07.028Z,1516695547.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101 2018-01-23T08:19:07.029Z,1516695547.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:19:07.029Z,1516695547.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101 2018-01-23T08:19:07.029Z,1516695547.029 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:19:07.029Z,1516695547.029 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101 2018-01-23T08:19:07.400Z,1516695547.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:19:07.400Z,1516695547.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:19:07.401Z,1516695547.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:19:07.401Z,1516695547.401 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:19:07.401Z,1516695547.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:19:07.402Z,1516695547.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:19:07.402Z,1516695547.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:19:07.402Z,1516695547.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:19:07.403Z,1516695547.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:19:07.819Z,1516695547.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:19:07.820Z,1516695547.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:08.201Z,1516695548.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:19:08.202Z,1516695548.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:08.605Z,1516695548.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:19:08.606Z,1516695548.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:09.017Z,1516695549.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:19:09.018Z,1516695549.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:09.405Z,1516695549.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:19:09.406Z,1516695549.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:09.800Z,1516695549.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:19:09.801Z,1516695549.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:10.208Z,1516695550.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:19:10.209Z,1516695550.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:10.600Z,1516695550.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:19:10.601Z,1516695550.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:11.005Z,1516695551.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:19:11.006Z,1516695551.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:11.409Z,1516695551.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:19:11.410Z,1516695551.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:11.820Z,1516695551.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:19:11.821Z,1516695551.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:12.195Z,1516695552.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:19:12.196Z,1516695552.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:12.604Z,1516695552.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:19:12.605Z,1516695552.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:13.006Z,1516695553.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:19:13.007Z,1516695553.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:13.424Z,1516695553.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:19:13.425Z,1516695553.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:13.801Z,1516695553.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x33463 got:0x7962 2018-01-23T08:19:13.842Z,1516695553.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:19:13.843Z,1516695553.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:14.204Z,1516695554.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:19:14.205Z,1516695554.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:14.599Z,1516695554.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:19:14.600Z,1516695554.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:15.018Z,1516695555.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:19:15.019Z,1516695555.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:15.412Z,1516695555.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:19:15.413Z,1516695555.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:15.816Z,1516695555.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:19:15.817Z,1516695555.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:16.208Z,1516695556.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:19:16.209Z,1516695556.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:16.605Z,1516695556.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:19:16.607Z,1516695556.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:17.014Z,1516695557.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:19:17.015Z,1516695557.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:17.416Z,1516695557.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:19:17.417Z,1516695557.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:17.802Z,1516695557.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:19:17.803Z,1516695557.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:18.204Z,1516695558.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:19:18.205Z,1516695558.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:18.609Z,1516695558.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:19:18.610Z,1516695558.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:19.003Z,1516695559.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:19:19.004Z,1516695559.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:19.404Z,1516695559.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:19:19.405Z,1516695559.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:19.828Z,1516695559.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:19:19.829Z,1516695559.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:20.208Z,1516695560.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:19:20.209Z,1516695560.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:20.586Z,1516695560.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:19:20.587Z,1516695560.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:21.020Z,1516695561.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:19:21.021Z,1516695561.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:21.432Z,1516695561.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:19:21.433Z,1516695561.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:21.792Z,1516695561.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:19:21.793Z,1516695561.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:22.186Z,1516695562.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:19:22.187Z,1516695562.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:22.594Z,1516695562.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:19:22.595Z,1516695562.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:22.990Z,1516695562.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:19:22.991Z,1516695562.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:23.393Z,1516695563.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:19:23.394Z,1516695563.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:23.794Z,1516695563.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:19:23.796Z,1516695563.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:24.198Z,1516695564.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:19:24.199Z,1516695564.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:24.593Z,1516695564.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:19:24.595Z,1516695564.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:25.000Z,1516695565.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:19:25.001Z,1516695565.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:25.401Z,1516695565.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:19:25.403Z,1516695565.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:25.802Z,1516695565.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:19:25.803Z,1516695565.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:26.199Z,1516695566.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:19:26.200Z,1516695566.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:26.590Z,1516695566.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:19:26.592Z,1516695566.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:27.008Z,1516695567.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:27.406Z,1516695567.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:27.803Z,1516695567.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:28.194Z,1516695568.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:28.597Z,1516695568.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:29.004Z,1516695569.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:29.405Z,1516695569.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:29.804Z,1516695569.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:30.192Z,1516695570.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:30.604Z,1516695570.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:31.009Z,1516695571.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:31.404Z,1516695571.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:31.806Z,1516695571.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:32.193Z,1516695572.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:32.590Z,1516695572.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:32.992Z,1516695572.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:33.402Z,1516695573.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:33.804Z,1516695573.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:34.217Z,1516695574.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:34.596Z,1516695574.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:34.980Z,1516695574.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:35.380Z,1516695575.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:35.813Z,1516695575.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:36.214Z,1516695576.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:36.597Z,1516695576.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:36.994Z,1516695576.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:37.388Z,1516695577.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:37.788Z,1516695577.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:38.190Z,1516695578.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:38.588Z,1516695578.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:38.988Z,1516695578.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:39.394Z,1516695579.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:39.794Z,1516695579.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:40.200Z,1516695580.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:40.589Z,1516695580.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:43.686Z,1516695583.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:43.828Z,1516695583.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:44.174Z,1516695584.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:44.579Z,1516695584.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:44.955Z,1516695584.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:45.357Z,1516695585.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:45.748Z,1516695585.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:46.161Z,1516695586.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:46.553Z,1516695586.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:46.953Z,1516695586.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:47.370Z,1516695587.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:47.765Z,1516695587.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:48.158Z,1516695588.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:48.551Z,1516695588.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:48.951Z,1516695588.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:49.353Z,1516695589.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:49.752Z,1516695589.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:50.157Z,1516695590.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:50.564Z,1516695590.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:50.961Z,1516695590.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:51.356Z,1516695591.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:51.756Z,1516695591.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:52.160Z,1516695592.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:52.557Z,1516695592.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:52.952Z,1516695592.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:53.373Z,1516695593.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:53.765Z,1516695593.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:54.163Z,1516695594.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:54.553Z,1516695594.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:54.958Z,1516695594.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:55.361Z,1516695595.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:55.761Z,1516695595.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:56.174Z,1516695596.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:56.572Z,1516695596.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:56.962Z,1516695596.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:57.361Z,1516695597.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:57.764Z,1516695597.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:58.153Z,1516695598.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:58.561Z,1516695598.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:58.964Z,1516695598.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:59.367Z,1516695599.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:19:59.771Z,1516695599.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:00.173Z,1516695600.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:00.554Z,1516695600.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:00.965Z,1516695600.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:01.363Z,1516695601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:01.765Z,1516695601.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:02.173Z,1516695602.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:02.570Z,1516695602.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:02.971Z,1516695602.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:03.350Z,1516695603.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:03.752Z,1516695603.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:04.143Z,1516695604.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:04.574Z,1516695604.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:04.948Z,1516695604.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:05.381Z,1516695605.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:05.785Z,1516695605.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:06.177Z,1516695606.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:06.549Z,1516695606.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:06.953Z,1516695606.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:07.353Z,1516695607.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:07.752Z,1516695607.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:08.183Z,1516695608.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:08.580Z,1516695608.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:08.955Z,1516695608.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:09.348Z,1516695609.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:09.752Z,1516695609.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:10.149Z,1516695610.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:10.554Z,1516695610.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:10.963Z,1516695610.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:11.355Z,1516695611.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:11.765Z,1516695611.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:12.158Z,1516695612.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:12.548Z,1516695612.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:12.951Z,1516695612.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:13.353Z,1516695613.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:13.751Z,1516695613.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:14.162Z,1516695614.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:14.568Z,1516695614.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:14.969Z,1516695614.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:15.351Z,1516695615.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:15.753Z,1516695615.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:16.151Z,1516695616.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:16.556Z,1516695616.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:16.952Z,1516695616.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:17.375Z,1516695617.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:17.773Z,1516695617.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:18.162Z,1516695618.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:18.553Z,1516695618.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:18.965Z,1516695618.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:19.357Z,1516695619.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:19.758Z,1516695619.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:20.169Z,1516695620.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:20.566Z,1516695620.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:20.973Z,1516695620.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:21.365Z,1516695621.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:21.755Z,1516695621.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:22.164Z,1516695622.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:22.558Z,1516695622.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:22.964Z,1516695622.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:23.366Z,1516695623.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:23.767Z,1516695623.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:24.163Z,1516695624.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:24.560Z,1516695624.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:24.953Z,1516695624.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:25.356Z,1516695625.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:25.753Z,1516695625.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:26.163Z,1516695626.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:26.574Z,1516695626.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:26.975Z,1516695626.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:27.353Z,1516695627.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:27.755Z,1516695627.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:28.160Z,1516695628.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:28.560Z,1516695628.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:28.970Z,1516695628.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:29.366Z,1516695629.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:29.766Z,1516695629.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:30.169Z,1516695630.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:30.553Z,1516695630.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:30.969Z,1516695630.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:31.356Z,1516695631.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:31.765Z,1516695631.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:32.163Z,1516695632.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:32.578Z,1516695632.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:32.975Z,1516695632.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:33.353Z,1516695633.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:33.755Z,1516695633.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:34.161Z,1516695634.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:34.561Z,1516695634.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:34.961Z,1516695634.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:35.373Z,1516695635.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:35.774Z,1516695635.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:36.167Z,1516695636.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:36.561Z,1516695636.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:36.961Z,1516695636.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:37.369Z,1516695637.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:37.765Z,1516695637.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:38.173Z,1516695638.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:38.578Z,1516695638.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:38.973Z,1516695638.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:39.356Z,1516695639.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:39.743Z,1516695639.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:40.175Z,1516695640.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:40.578Z,1516695640.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:40.985Z,1516695640.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:44.042Z,1516695644.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:44.176Z,1516695644.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:44.535Z,1516695644.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:44.949Z,1516695644.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:45.334Z,1516695645.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:45.731Z,1516695645.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:46.136Z,1516695646.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:46.529Z,1516695646.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:46.935Z,1516695646.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:47.336Z,1516695647.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:47.739Z,1516695647.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:48.137Z,1516695648.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:48.531Z,1516695648.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:48.933Z,1516695648.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:49.324Z,1516695649.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:49.739Z,1516695649.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:50.136Z,1516695650.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:50.548Z,1516695650.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:50.938Z,1516695650.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:51.316Z,1516695651.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:51.721Z,1516695651.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:52.147Z,1516695652.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:52.526Z,1516695652.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:52.937Z,1516695652.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:53.328Z,1516695653.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:53.733Z,1516695653.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:54.137Z,1516695654.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:54.533Z,1516695654.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:54.934Z,1516695654.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:55.324Z,1516695655.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:55.722Z,1516695655.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:56.138Z,1516695656.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:56.541Z,1516695656.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:56.937Z,1516695656.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:57.330Z,1516695657.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:57.728Z,1516695657.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:58.134Z,1516695658.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:58.535Z,1516695658.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:58.945Z,1516695658.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:59.338Z,1516695659.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:20:59.733Z,1516695659.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:00.131Z,1516695660.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:00.527Z,1516695660.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:00.921Z,1516695660.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:01.334Z,1516695661.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:01.745Z,1516695661.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:02.135Z,1516695662.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:02.529Z,1516695662.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:02.932Z,1516695662.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:03.331Z,1516695663.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:03.731Z,1516695663.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:04.133Z,1516695664.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:04.535Z,1516695664.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:04.941Z,1516695664.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:05.335Z,1516695665.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:05.733Z,1516695665.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:06.129Z,1516695666.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:06.532Z,1516695666.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:06.933Z,1516695666.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:07.334Z,1516695667.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:07.739Z,1516695667.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:08.144Z,1516695668.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:08.537Z,1516695668.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:08.927Z,1516695668.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:09.331Z,1516695669.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:09.732Z,1516695669.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:10.133Z,1516695670.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:10.537Z,1516695670.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:10.940Z,1516695670.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:11.338Z,1516695671.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:11.733Z,1516695671.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:12.135Z,1516695672.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:12.544Z,1516695672.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:12.916Z,1516695672.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:13.342Z,1516695673.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:13.750Z,1516695673.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:14.148Z,1516695674.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:14.548Z,1516695674.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:14.949Z,1516695674.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:15.325Z,1516695675.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:15.723Z,1516695675.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:16.149Z,1516695676.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:16.531Z,1516695676.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:16.931Z,1516695676.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:17.360Z,1516695677.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:17.729Z,1516695677.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:18.129Z,1516695678.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:18.526Z,1516695678.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:18.926Z,1516695678.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:19.331Z,1516695679.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:19.737Z,1516695679.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:20.137Z,1516695680.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:20.533Z,1516695680.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:20.925Z,1516695680.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:21.323Z,1516695681.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:21.725Z,1516695681.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:22.129Z,1516695682.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:22.533Z,1516695682.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:22.935Z,1516695682.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:23.333Z,1516695683.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:23.723Z,1516695683.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:24.122Z,1516695684.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:24.524Z,1516695684.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:24.923Z,1516695684.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:25.333Z,1516695685.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:25.736Z,1516695685.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:26.137Z,1516695686.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:26.533Z,1516695686.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:26.927Z,1516695686.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:27.333Z,1516695687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:27.728Z,1516695687.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:28.130Z,1516695688.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:28.534Z,1516695688.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:28.937Z,1516695688.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:29.333Z,1516695689.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:29.729Z,1516695689.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:30.129Z,1516695690.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:30.524Z,1516695690.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:30.929Z,1516695690.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:31.337Z,1516695691.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:31.732Z,1516695691.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:32.137Z,1516695692.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:32.526Z,1516695692.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:32.923Z,1516695692.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:33.324Z,1516695693.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:33.806Z,1516695693.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:34.127Z,1516695694.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:34.537Z,1516695694.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:34.934Z,1516695694.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:35.340Z,1516695695.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:35.726Z,1516695695.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:36.122Z,1516695696.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:36.524Z,1516695696.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:36.922Z,1516695696.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:37.341Z,1516695697.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:37.732Z,1516695697.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:38.137Z,1516695698.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:38.533Z,1516695698.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:38.928Z,1516695698.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:38.931Z,1516695698.931 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:16:38.6Z 2018-01-23T08:21:38.931Z,1516695698.931 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:21:38.931Z,1516695698.931 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:21:39.329Z,1516695699.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:39.868Z,1516695699.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:40.129Z,1516695700.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:43.294Z,1516695703.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:43.371Z,1516695703.371 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0120.lzma 2018-01-23T08:21:43.458Z,1516695703.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:43.798Z,1516695703.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:44.145Z,1516695704.145 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0120.lzma.bak 2018-01-23T08:21:44.145Z,1516695704.145 [DataOverHttps](INFO): SBD MOMSN=7755271 2018-01-23T08:21:44.200Z,1516695704.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:44.828Z,1516695704.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:44.997Z,1516695704.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:48.098Z,1516695708.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:48.249Z,1516695708.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:48.628Z,1516695708.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:49.004Z,1516695709.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:49.394Z,1516695709.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:49.802Z,1516695709.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:52.891Z,1516695712.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:52.968Z,1516695712.968 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0121.lzma 2018-01-23T08:21:53.029Z,1516695713.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:53.389Z,1516695713.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:53.721Z,1516695713.721 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0121.lzma.bak 2018-01-23T08:21:53.721Z,1516695713.721 [DataOverHttps](INFO): SBD MOMSN=7755273 2018-01-23T08:21:53.796Z,1516695713.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:54.393Z,1516695714.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:54.396Z,1516695714.396 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:21:54.396Z,1516695714.396 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:21:54.396Z,1516695714.396 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:21:54.558Z,1516695714.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:57.653Z,1516695717.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:57.801Z,1516695717.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:58.158Z,1516695718.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:58.584Z,1516695718.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:58.951Z,1516695718.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:59.357Z,1516695719.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:21:59.752Z,1516695719.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:00.149Z,1516695720.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:00.561Z,1516695720.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:00.964Z,1516695720.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:01.361Z,1516695721.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:01.760Z,1516695721.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:02.150Z,1516695722.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:02.560Z,1516695722.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:02.951Z,1516695722.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:03.360Z,1516695723.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:03.708Z,1516695723.708 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:22:03.708Z,1516695723.708 [NAL9602] Data Fault, FailCount= 3 2018-01-23T08:22:03.708Z,1516695723.708 [NAL9602](ERROR): Data Fault 2018-01-23T08:22:03.762Z,1516695723.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:03.788Z,1516695723.788 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:22:04.108Z,1516695724.108 [NAL9602](INFO): Powering down 2018-01-23T08:22:04.162Z,1516695724.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:04.558Z,1516695724.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:04.956Z,1516695724.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:04.970Z,1516695724.970 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:22:04.970Z,1516695724.970 [NAL9602] No Fault, FailCount= 3 2018-01-23T08:22:05.359Z,1516695725.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:05.753Z,1516695725.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:06.151Z,1516695726.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:06.538Z,1516695726.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:06.938Z,1516695726.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:07.338Z,1516695727.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:07.742Z,1516695727.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:07.742Z,1516695727.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102 2018-01-23T08:22:07.742Z,1516695727.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:22:07.744Z,1516695727.744 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:07.744Z,1516695727.744 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102 2018-01-23T08:22:07.744Z,1516695727.744 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:22:07.746Z,1516695727.746 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:07.746Z,1516695727.746 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102 2018-01-23T08:22:07.746Z,1516695727.746 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:22:07.784Z,1516695727.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:22:07.784Z,1516695727.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:22:07.784Z,1516695727.784 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:22:08.169Z,1516695728.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:22:08.169Z,1516695728.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102 2018-01-23T08:22:08.170Z,1516695728.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:22:08.170Z,1516695728.170 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102 2018-01-23T08:22:08.170Z,1516695728.170 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:22:08.170Z,1516695728.170 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102 2018-01-23T08:22:08.546Z,1516695728.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:22:08.551Z,1516695728.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:22:08.551Z,1516695728.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:22:08.551Z,1516695728.551 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:22:08.552Z,1516695728.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:22:08.552Z,1516695728.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:22:08.553Z,1516695728.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:22:08.553Z,1516695728.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:22:08.553Z,1516695728.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:22:08.952Z,1516695728.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:22:08.953Z,1516695728.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:09.343Z,1516695729.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:22:09.344Z,1516695729.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:09.745Z,1516695729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:22:09.746Z,1516695729.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:10.144Z,1516695730.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:22:10.145Z,1516695730.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:10.543Z,1516695730.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:22:10.544Z,1516695730.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:10.948Z,1516695730.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:22:10.949Z,1516695730.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:11.344Z,1516695731.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:22:11.345Z,1516695731.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:11.746Z,1516695731.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:22:11.747Z,1516695731.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:12.146Z,1516695732.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:22:12.148Z,1516695732.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:12.546Z,1516695732.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:22:12.548Z,1516695732.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:12.943Z,1516695732.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:22:12.944Z,1516695732.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:13.346Z,1516695733.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:22:13.348Z,1516695733.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:13.745Z,1516695733.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:22:13.746Z,1516695733.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:14.143Z,1516695734.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:22:14.144Z,1516695734.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:14.550Z,1516695734.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:22:14.551Z,1516695734.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:14.945Z,1516695734.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:22:14.946Z,1516695734.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:15.343Z,1516695735.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:22:15.344Z,1516695735.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:15.746Z,1516695735.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:22:15.748Z,1516695735.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:16.145Z,1516695736.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:22:16.146Z,1516695736.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:16.543Z,1516695736.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:22:16.544Z,1516695736.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:16.946Z,1516695736.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:22:16.948Z,1516695736.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:17.346Z,1516695737.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:22:17.348Z,1516695737.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:17.752Z,1516695737.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:22:17.753Z,1516695737.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:18.150Z,1516695738.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:22:18.151Z,1516695738.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:18.545Z,1516695738.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:22:18.546Z,1516695738.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:18.946Z,1516695738.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:22:18.948Z,1516695738.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:19.346Z,1516695739.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:22:19.348Z,1516695739.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:19.745Z,1516695739.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:22:19.746Z,1516695739.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:20.146Z,1516695740.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:22:20.147Z,1516695740.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:20.546Z,1516695740.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:22:20.548Z,1516695740.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:20.946Z,1516695740.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:22:20.947Z,1516695740.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:21.343Z,1516695741.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:22:21.344Z,1516695741.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:21.746Z,1516695741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:22:21.748Z,1516695741.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:22.145Z,1516695742.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:22:22.146Z,1516695742.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:22.564Z,1516695742.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:22:22.565Z,1516695742.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:22.953Z,1516695742.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:22:22.954Z,1516695742.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:23.355Z,1516695743.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:22:23.356Z,1516695743.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:23.752Z,1516695743.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:22:23.753Z,1516695743.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:24.153Z,1516695744.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:22:24.154Z,1516695744.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:24.562Z,1516695744.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:22:24.563Z,1516695744.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:25.009Z,1516695745.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T08:22:25.010Z,1516695745.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:25.353Z,1516695745.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:22:25.354Z,1516695745.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:25.764Z,1516695745.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:22:25.765Z,1516695745.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:26.148Z,1516695746.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:22:26.149Z,1516695746.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:26.537Z,1516695746.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:22:26.538Z,1516695746.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:26.966Z,1516695746.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:22:26.968Z,1516695746.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:27.340Z,1516695747.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:22:27.341Z,1516695747.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:27.770Z,1516695747.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:28.145Z,1516695748.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:28.540Z,1516695748.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:28.972Z,1516695748.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:29.344Z,1516695749.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:29.743Z,1516695749.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:30.153Z,1516695750.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:30.550Z,1516695750.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:30.943Z,1516695750.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:31.348Z,1516695751.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:31.777Z,1516695751.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:32.146Z,1516695752.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:32.548Z,1516695752.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:32.949Z,1516695752.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:33.347Z,1516695753.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:33.759Z,1516695753.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:34.123Z,1516695754.123 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:22:34.155Z,1516695754.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:34.548Z,1516695754.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:34.950Z,1516695754.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:35.359Z,1516695755.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:35.756Z,1516695755.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:36.161Z,1516695756.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:36.555Z,1516695756.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:36.954Z,1516695756.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:37.355Z,1516695757.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:37.757Z,1516695757.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:38.149Z,1516695758.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:38.560Z,1516695758.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:38.954Z,1516695758.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:39.357Z,1516695759.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:39.753Z,1516695759.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:40.151Z,1516695760.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:40.554Z,1516695760.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:40.952Z,1516695760.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:41.360Z,1516695761.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:41.751Z,1516695761.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:42.147Z,1516695762.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:42.559Z,1516695762.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:42.956Z,1516695762.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:43.354Z,1516695763.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:43.751Z,1516695763.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:44.151Z,1516695764.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:44.553Z,1516695764.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:44.961Z,1516695764.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:45.308Z,1516695765.308 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:22:45.365Z,1516695765.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:45.753Z,1516695765.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:46.171Z,1516695766.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:46.564Z,1516695766.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:46.942Z,1516695766.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:47.369Z,1516695767.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:47.769Z,1516695767.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:48.172Z,1516695768.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:48.580Z,1516695768.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:48.975Z,1516695768.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:49.355Z,1516695769.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:49.777Z,1516695769.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:50.144Z,1516695770.144 [PNI_TCM](ERROR): CRC does not match. Expected:0x52797 got:0x150 2018-01-23T08:22:50.176Z,1516695770.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:50.550Z,1516695770.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:50.955Z,1516695770.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:51.357Z,1516695771.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:51.755Z,1516695771.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:52.161Z,1516695772.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:52.554Z,1516695772.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:52.965Z,1516695772.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:53.346Z,1516695773.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x52681 got:0x17072 2018-01-23T08:22:53.379Z,1516695773.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:53.751Z,1516695773.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:54.157Z,1516695774.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:54.562Z,1516695774.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:54.964Z,1516695774.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:58.055Z,1516695778.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:58.188Z,1516695778.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:58.553Z,1516695778.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:58.961Z,1516695778.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:59.385Z,1516695779.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:22:59.757Z,1516695779.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:00.148Z,1516695780.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:00.553Z,1516695780.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:00.969Z,1516695780.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:01.361Z,1516695781.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:01.756Z,1516695781.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:02.148Z,1516695782.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:02.564Z,1516695782.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:02.942Z,1516695782.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:03.350Z,1516695783.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:03.752Z,1516695783.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:04.184Z,1516695784.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:04.558Z,1516695784.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:04.954Z,1516695784.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:05.345Z,1516695785.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:05.750Z,1516695785.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:06.143Z,1516695786.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:06.558Z,1516695786.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:06.954Z,1516695786.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:07.369Z,1516695787.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:07.757Z,1516695787.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:08.149Z,1516695788.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:08.546Z,1516695788.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:08.945Z,1516695788.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:09.344Z,1516695789.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:09.749Z,1516695789.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:10.158Z,1516695790.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:10.576Z,1516695790.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:10.955Z,1516695790.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:11.352Z,1516695791.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:11.753Z,1516695791.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:12.149Z,1516695792.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:12.548Z,1516695792.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:12.958Z,1516695792.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:13.360Z,1516695793.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:13.757Z,1516695793.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:14.151Z,1516695794.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:14.550Z,1516695794.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:14.953Z,1516695794.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:15.349Z,1516695795.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:15.753Z,1516695795.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:16.167Z,1516695796.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:16.560Z,1516695796.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:16.957Z,1516695796.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:17.345Z,1516695797.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:17.748Z,1516695797.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:18.132Z,1516695798.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:18.538Z,1516695798.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:18.943Z,1516695798.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:19.346Z,1516695799.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:19.757Z,1516695799.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:20.139Z,1516695800.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:20.540Z,1516695800.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:20.938Z,1516695800.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:21.342Z,1516695801.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:21.750Z,1516695801.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:22.150Z,1516695802.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:22.553Z,1516695802.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:22.964Z,1516695802.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:23.348Z,1516695803.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:23.748Z,1516695803.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:24.152Z,1516695804.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:24.549Z,1516695804.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:24.950Z,1516695804.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:25.360Z,1516695805.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:25.765Z,1516695805.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:26.145Z,1516695806.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:26.549Z,1516695806.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:26.937Z,1516695806.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:27.345Z,1516695807.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:27.747Z,1516695807.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:28.152Z,1516695808.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:28.564Z,1516695808.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:28.961Z,1516695808.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:29.329Z,1516695809.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:29.737Z,1516695809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:30.139Z,1516695810.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:30.537Z,1516695810.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:30.946Z,1516695810.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:31.350Z,1516695811.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:31.742Z,1516695811.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:32.138Z,1516695812.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:32.538Z,1516695812.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:32.937Z,1516695812.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:33.338Z,1516695813.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:33.738Z,1516695813.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:34.142Z,1516695814.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:34.546Z,1516695814.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:34.949Z,1516695814.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:35.336Z,1516695815.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:35.749Z,1516695815.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:36.140Z,1516695816.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:36.536Z,1516695816.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:36.942Z,1516695816.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:37.346Z,1516695817.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:37.742Z,1516695817.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:38.138Z,1516695818.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:38.539Z,1516695818.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:38.937Z,1516695818.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:39.340Z,1516695819.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:39.738Z,1516695819.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:40.142Z,1516695820.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:40.546Z,1516695820.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:40.949Z,1516695820.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:41.341Z,1516695821.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:41.742Z,1516695821.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:42.140Z,1516695822.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:42.538Z,1516695822.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:42.957Z,1516695822.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:43.353Z,1516695823.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:43.749Z,1516695823.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:44.141Z,1516695824.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:44.544Z,1516695824.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:44.939Z,1516695824.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:45.350Z,1516695825.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:45.739Z,1516695825.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:46.150Z,1516695826.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:46.553Z,1516695826.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:46.951Z,1516695826.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:47.341Z,1516695827.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:47.749Z,1516695827.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:48.144Z,1516695828.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:48.541Z,1516695828.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:48.953Z,1516695828.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:49.355Z,1516695829.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:49.751Z,1516695829.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:50.148Z,1516695830.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:50.551Z,1516695830.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:50.941Z,1516695830.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:51.349Z,1516695831.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:51.743Z,1516695831.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:52.162Z,1516695832.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:52.565Z,1516695832.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:52.956Z,1516695832.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:53.353Z,1516695833.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:53.752Z,1516695833.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:54.150Z,1516695834.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:54.584Z,1516695834.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:54.965Z,1516695834.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:55.358Z,1516695835.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:58.453Z,1516695838.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:58.601Z,1516695838.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:58.924Z,1516695838.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:59.333Z,1516695839.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:23:59.720Z,1516695839.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:00.137Z,1516695840.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:00.532Z,1516695840.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:00.929Z,1516695840.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:01.333Z,1516695841.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:01.723Z,1516695841.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:02.121Z,1516695842.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:02.521Z,1516695842.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:02.940Z,1516695842.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:03.329Z,1516695843.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:03.737Z,1516695843.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:04.124Z,1516695844.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:04.521Z,1516695844.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:04.931Z,1516695844.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:05.334Z,1516695845.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:05.729Z,1516695845.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:06.121Z,1516695846.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:06.530Z,1516695846.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:06.930Z,1516695846.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:07.333Z,1516695847.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:07.738Z,1516695847.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:08.122Z,1516695848.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:08.527Z,1516695848.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:08.930Z,1516695848.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:09.331Z,1516695849.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:09.730Z,1516695849.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:10.124Z,1516695850.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:10.525Z,1516695850.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:10.930Z,1516695850.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:11.334Z,1516695851.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:11.730Z,1516695851.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:12.127Z,1516695852.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:12.525Z,1516695852.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:12.930Z,1516695852.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:13.334Z,1516695853.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:13.730Z,1516695853.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:14.120Z,1516695854.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:14.527Z,1516695854.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:14.931Z,1516695854.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:15.333Z,1516695855.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:15.734Z,1516695855.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:16.128Z,1516695856.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:16.524Z,1516695856.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:16.940Z,1516695856.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:17.335Z,1516695857.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:17.737Z,1516695857.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:18.123Z,1516695858.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:18.149Z,1516695858.149 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:24:18.512Z,1516695858.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:18.911Z,1516695858.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:19.342Z,1516695859.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:19.740Z,1516695859.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:20.136Z,1516695860.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:20.539Z,1516695860.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:20.915Z,1516695860.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:21.320Z,1516695861.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:21.733Z,1516695861.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:22.134Z,1516695862.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:22.529Z,1516695862.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:22.929Z,1516695862.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:23.320Z,1516695863.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:23.725Z,1516695863.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:24.121Z,1516695864.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:24.524Z,1516695864.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:24.919Z,1516695864.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:25.329Z,1516695865.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:25.732Z,1516695865.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:26.129Z,1516695866.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:26.519Z,1516695866.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:26.924Z,1516695866.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:27.322Z,1516695867.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:27.725Z,1516695867.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:28.131Z,1516695868.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:28.530Z,1516695868.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:28.933Z,1516695868.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:29.326Z,1516695869.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:29.730Z,1516695869.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:30.123Z,1516695870.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:30.531Z,1516695870.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:30.923Z,1516695870.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:31.342Z,1516695871.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:31.735Z,1516695871.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:32.141Z,1516695872.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:32.526Z,1516695872.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:32.933Z,1516695872.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:33.327Z,1516695873.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:33.729Z,1516695873.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:34.136Z,1516695874.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:34.540Z,1516695874.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:34.931Z,1516695874.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:35.329Z,1516695875.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:35.733Z,1516695875.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:36.125Z,1516695876.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:36.529Z,1516695876.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:36.921Z,1516695876.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:37.337Z,1516695877.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:37.734Z,1516695877.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:38.130Z,1516695878.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:38.531Z,1516695878.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:38.930Z,1516695878.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:39.326Z,1516695879.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:39.729Z,1516695879.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:40.135Z,1516695880.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:40.540Z,1516695880.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:40.934Z,1516695880.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:41.332Z,1516695881.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:41.731Z,1516695881.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:42.131Z,1516695882.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:42.532Z,1516695882.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:42.909Z,1516695882.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:43.332Z,1516695883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:43.745Z,1516695883.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:44.140Z,1516695884.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:44.511Z,1516695884.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:44.916Z,1516695884.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:45.316Z,1516695885.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:45.741Z,1516695885.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:46.150Z,1516695886.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:46.526Z,1516695886.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:46.950Z,1516695886.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:47.332Z,1516695887.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:47.724Z,1516695887.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:48.125Z,1516695888.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:48.519Z,1516695888.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:48.920Z,1516695888.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:49.322Z,1516695889.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:49.732Z,1516695889.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:50.129Z,1516695890.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:50.525Z,1516695890.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:50.920Z,1516695890.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:51.321Z,1516695891.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:51.729Z,1516695891.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:52.126Z,1516695892.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:52.529Z,1516695892.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:52.926Z,1516695892.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:53.324Z,1516695893.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:53.725Z,1516695893.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:54.133Z,1516695894.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:54.524Z,1516695894.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:54.920Z,1516695894.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:55.329Z,1516695895.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:55.730Z,1516695895.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:58.833Z,1516695898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:58.965Z,1516695898.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:59.326Z,1516695899.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:24:59.732Z,1516695899.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:00.132Z,1516695900.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:00.541Z,1516695900.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:00.933Z,1516695900.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:01.322Z,1516695901.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:01.737Z,1516695901.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:02.133Z,1516695902.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:02.524Z,1516695902.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:02.926Z,1516695902.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:03.333Z,1516695903.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:03.736Z,1516695903.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:04.134Z,1516695904.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:04.526Z,1516695904.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:04.923Z,1516695904.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:05.327Z,1516695905.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:05.733Z,1516695905.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:06.134Z,1516695906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:06.549Z,1516695906.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:06.936Z,1516695906.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:07.337Z,1516695907.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:07.728Z,1516695907.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.138Z,1516695908.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.529Z,1516695908.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.937Z,1516695908.937 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.937Z,1516695908.937 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103 2018-01-23T08:25:08.938Z,1516695908.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:25:08.939Z,1516695908.939 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.940Z,1516695908.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103 2018-01-23T08:25:08.940Z,1516695908.940 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:25:08.941Z,1516695908.941 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:08.941Z,1516695908.941 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103 2018-01-23T08:25:08.942Z,1516695908.942 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:25:08.954Z,1516695908.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:25:08.954Z,1516695908.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:25:08.971Z,1516695908.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:25:09.384Z,1516695909.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:25:09.384Z,1516695909.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103 2018-01-23T08:25:09.384Z,1516695909.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:25:09.384Z,1516695909.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103 2018-01-23T08:25:09.385Z,1516695909.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:25:09.385Z,1516695909.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103 2018-01-23T08:25:09.740Z,1516695909.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:25:09.741Z,1516695909.741 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:25:09.741Z,1516695909.741 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:25:09.742Z,1516695909.742 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:25:09.742Z,1516695909.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:25:09.742Z,1516695909.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:25:09.743Z,1516695909.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:25:09.743Z,1516695909.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:25:09.744Z,1516695909.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:25:10.149Z,1516695910.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:25:10.150Z,1516695910.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:10.538Z,1516695910.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:25:10.539Z,1516695910.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:10.940Z,1516695910.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:25:10.941Z,1516695910.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:11.344Z,1516695911.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:25:11.345Z,1516695911.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:11.717Z,1516695911.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:25:11.718Z,1516695911.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:12.146Z,1516695912.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:25:12.152Z,1516695912.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:12.548Z,1516695912.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:25:12.549Z,1516695912.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:12.949Z,1516695912.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:25:12.950Z,1516695912.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:13.327Z,1516695913.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:25:13.328Z,1516695913.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:13.723Z,1516695913.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:25:13.724Z,1516695913.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:14.128Z,1516695914.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:25:14.129Z,1516695914.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:14.521Z,1516695914.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:25:14.522Z,1516695914.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:14.922Z,1516695914.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:25:14.923Z,1516695914.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:15.326Z,1516695915.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:25:15.327Z,1516695915.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:15.729Z,1516695915.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:25:15.730Z,1516695915.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:16.132Z,1516695916.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:25:16.133Z,1516695916.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:16.532Z,1516695916.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:25:16.533Z,1516695916.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:16.922Z,1516695916.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:25:16.923Z,1516695916.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:17.333Z,1516695917.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:25:17.334Z,1516695917.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:17.727Z,1516695917.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:25:17.728Z,1516695917.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:18.128Z,1516695918.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:25:18.129Z,1516695918.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:18.529Z,1516695918.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:25:18.530Z,1516695918.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:18.932Z,1516695918.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:25:18.933Z,1516695918.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:19.322Z,1516695919.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:25:19.323Z,1516695919.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:19.728Z,1516695919.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:25:19.729Z,1516695919.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:20.122Z,1516695920.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:25:20.123Z,1516695920.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:20.523Z,1516695920.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:25:20.524Z,1516695920.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:20.922Z,1516695920.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:25:20.923Z,1516695920.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:21.332Z,1516695921.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:25:21.333Z,1516695921.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:21.729Z,1516695921.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:25:21.730Z,1516695921.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:22.128Z,1516695922.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:25:22.129Z,1516695922.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:22.522Z,1516695922.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:25:22.524Z,1516695922.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:22.922Z,1516695922.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:25:22.923Z,1516695922.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:23.332Z,1516695923.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:25:23.333Z,1516695923.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:23.722Z,1516695923.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:25:23.723Z,1516695923.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:24.132Z,1516695924.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:25:24.133Z,1516695924.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:24.529Z,1516695924.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:25:24.530Z,1516695924.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:24.932Z,1516695924.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:25:24.933Z,1516695924.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:25.324Z,1516695925.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:25:25.325Z,1516695925.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:25.732Z,1516695925.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:25:25.733Z,1516695925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:26.129Z,1516695926.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:25:26.130Z,1516695926.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:26.527Z,1516695926.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:25:26.528Z,1516695926.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:26.932Z,1516695926.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:25:26.933Z,1516695926.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:27.334Z,1516695927.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:25:27.335Z,1516695927.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:27.736Z,1516695927.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:25:27.737Z,1516695927.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:28.133Z,1516695928.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:25:28.134Z,1516695928.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:28.530Z,1516695928.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:25:28.531Z,1516695928.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:28.924Z,1516695928.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:25:28.925Z,1516695928.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:29.324Z,1516695929.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:29.726Z,1516695929.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:30.134Z,1516695930.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:30.544Z,1516695930.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:30.937Z,1516695930.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:31.335Z,1516695931.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:31.725Z,1516695931.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:32.126Z,1516695932.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:32.532Z,1516695932.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:32.931Z,1516695932.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:33.334Z,1516695933.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:33.737Z,1516695933.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:34.144Z,1516695934.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:34.526Z,1516695934.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:34.931Z,1516695934.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:35.334Z,1516695935.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:35.726Z,1516695935.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:36.145Z,1516695936.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:36.542Z,1516695936.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:36.945Z,1516695936.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:37.345Z,1516695937.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:37.725Z,1516695937.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:38.151Z,1516695938.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:38.557Z,1516695938.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:38.954Z,1516695938.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:39.358Z,1516695939.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:39.737Z,1516695939.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:40.162Z,1516695940.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:40.542Z,1516695940.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:40.939Z,1516695940.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:41.349Z,1516695941.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:41.741Z,1516695941.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:42.145Z,1516695942.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:42.549Z,1516695942.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:42.945Z,1516695942.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:43.341Z,1516695943.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:43.753Z,1516695943.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:44.169Z,1516695944.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:44.533Z,1516695944.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:44.944Z,1516695944.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:45.341Z,1516695945.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:45.745Z,1516695945.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:46.150Z,1516695946.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:46.551Z,1516695946.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:46.962Z,1516695946.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:47.376Z,1516695947.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:47.745Z,1516695947.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:48.153Z,1516695948.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:48.577Z,1516695948.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:48.936Z,1516695948.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:49.351Z,1516695949.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:49.793Z,1516695949.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:50.142Z,1516695950.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:50.545Z,1516695950.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:50.954Z,1516695950.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:51.373Z,1516695951.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:51.755Z,1516695951.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:52.162Z,1516695952.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:52.558Z,1516695952.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:52.921Z,1516695952.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:53.379Z,1516695953.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:53.774Z,1516695953.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:54.132Z,1516695954.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:54.549Z,1516695954.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:54.955Z,1516695954.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:55.345Z,1516695955.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:25:55.741Z,1516695955.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:01.389Z,1516695961.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:01.532Z,1516695961.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:01.859Z,1516695961.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:02.264Z,1516695962.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:02.658Z,1516695962.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:03.054Z,1516695963.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:03.462Z,1516695963.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:03.862Z,1516695963.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:04.265Z,1516695964.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:04.657Z,1516695964.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:05.061Z,1516695965.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:05.457Z,1516695965.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:05.856Z,1516695965.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:06.265Z,1516695966.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:06.663Z,1516695966.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:07.061Z,1516695967.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:07.461Z,1516695967.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:07.861Z,1516695967.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:08.259Z,1516695968.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:08.657Z,1516695968.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:09.055Z,1516695969.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:09.461Z,1516695969.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:09.866Z,1516695969.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:10.262Z,1516695970.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:10.659Z,1516695970.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:11.061Z,1516695971.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:11.459Z,1516695971.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:11.856Z,1516695971.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:12.265Z,1516695972.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:12.666Z,1516695972.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:13.065Z,1516695973.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:13.455Z,1516695973.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:13.861Z,1516695973.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:14.255Z,1516695974.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:14.661Z,1516695974.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:15.064Z,1516695975.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:15.472Z,1516695975.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:15.892Z,1516695975.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:16.260Z,1516695976.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:16.665Z,1516695976.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:17.085Z,1516695977.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:17.457Z,1516695977.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:17.859Z,1516695977.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:18.275Z,1516695978.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:18.670Z,1516695978.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:19.068Z,1516695979.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:19.467Z,1516695979.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:19.867Z,1516695979.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:20.269Z,1516695980.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:20.667Z,1516695980.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:21.067Z,1516695981.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:21.479Z,1516695981.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:21.870Z,1516695981.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:22.275Z,1516695982.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:22.668Z,1516695982.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:23.067Z,1516695983.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:23.460Z,1516695983.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:23.876Z,1516695983.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:24.277Z,1516695984.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:24.679Z,1516695984.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:25.073Z,1516695985.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:25.471Z,1516695985.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:25.849Z,1516695985.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:26.251Z,1516695986.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:26.656Z,1516695986.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:27.052Z,1516695987.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:27.485Z,1516695987.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:27.878Z,1516695987.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:28.278Z,1516695988.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:28.659Z,1516695988.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:29.055Z,1516695989.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:29.461Z,1516695989.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:29.856Z,1516695989.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:30.284Z,1516695990.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:30.662Z,1516695990.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:31.087Z,1516695991.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:31.457Z,1516695991.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:31.853Z,1516695991.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:32.256Z,1516695992.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:32.658Z,1516695992.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:33.058Z,1516695993.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:33.470Z,1516695993.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:33.877Z,1516695993.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:34.281Z,1516695994.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:34.659Z,1516695994.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:35.058Z,1516695995.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:35.464Z,1516695995.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:35.876Z,1516695995.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:36.269Z,1516695996.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:36.672Z,1516695996.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:37.077Z,1516695997.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:37.477Z,1516695997.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:37.869Z,1516695997.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:38.267Z,1516695998.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:38.669Z,1516695998.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:39.065Z,1516695999.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:39.473Z,1516695999.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:39.882Z,1516695999.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:40.268Z,1516696000.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:40.671Z,1516696000.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:41.053Z,1516696001.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:41.464Z,1516696001.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:41.879Z,1516696001.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:42.270Z,1516696002.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:42.680Z,1516696002.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:43.071Z,1516696003.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:43.445Z,1516696003.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:43.847Z,1516696003.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:44.251Z,1516696004.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:44.660Z,1516696004.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:45.056Z,1516696005.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:45.461Z,1516696005.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:45.862Z,1516696005.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:46.258Z,1516696006.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:46.654Z,1516696006.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:47.054Z,1516696007.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:47.454Z,1516696007.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:47.860Z,1516696007.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:48.265Z,1516696008.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:48.662Z,1516696008.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:49.064Z,1516696009.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:49.452Z,1516696009.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:49.854Z,1516696009.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:50.260Z,1516696010.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:50.657Z,1516696010.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:51.057Z,1516696011.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:51.467Z,1516696011.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:51.873Z,1516696011.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:52.269Z,1516696012.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:52.660Z,1516696012.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:53.055Z,1516696013.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:53.467Z,1516696013.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:53.860Z,1516696013.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:54.265Z,1516696014.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:54.673Z,1516696014.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:54.676Z,1516696014.676 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:26:54.676Z,1516696014.676 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:26:54.676Z,1516696014.676 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:26:54.676Z,1516696014.676 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:26:55.073Z,1516696015.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:55.076Z,1516696015.076 [Default:CheckIn:D] Stopped 2018-01-23T08:26:55.076Z,1516696015.076 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:26:55.457Z,1516696015.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:55.460Z,1516696015.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.050260 min 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn:E] Stopped 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn] Stopped 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn](INFO): Running loop #31 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn] Running Loop=31 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:26:55.461Z,1516696015.461 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:26:55.867Z,1516696015.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:58.967Z,1516696018.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:59.105Z,1516696019.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:59.438Z,1516696019.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:26:59.864Z,1516696019.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:00.234Z,1516696020.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:00.631Z,1516696020.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:01.038Z,1516696021.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:01.441Z,1516696021.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:01.833Z,1516696021.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:02.238Z,1516696022.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:02.634Z,1516696022.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:03.062Z,1516696023.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:03.432Z,1516696023.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:03.841Z,1516696023.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:04.241Z,1516696024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:04.632Z,1516696024.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:05.030Z,1516696025.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:05.441Z,1516696025.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:05.848Z,1516696025.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:06.241Z,1516696026.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:06.633Z,1516696026.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:07.031Z,1516696027.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:07.433Z,1516696027.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:07.831Z,1516696027.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:08.248Z,1516696028.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:08.642Z,1516696028.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:09.049Z,1516696029.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:09.433Z,1516696029.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:09.831Z,1516696029.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:10.242Z,1516696030.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:10.641Z,1516696030.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:11.042Z,1516696031.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:11.434Z,1516696031.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:11.832Z,1516696031.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:12.253Z,1516696032.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:12.645Z,1516696032.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:13.044Z,1516696033.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:13.443Z,1516696033.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:13.834Z,1516696033.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:14.248Z,1516696034.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:14.645Z,1516696034.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:15.046Z,1516696035.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:15.434Z,1516696035.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:15.834Z,1516696035.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:16.252Z,1516696036.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:16.647Z,1516696036.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:17.045Z,1516696037.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:17.436Z,1516696037.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:17.844Z,1516696037.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:18.252Z,1516696038.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:18.653Z,1516696038.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:19.047Z,1516696039.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:19.437Z,1516696039.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:19.844Z,1516696039.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:20.255Z,1516696040.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:20.653Z,1516696040.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:21.050Z,1516696041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:21.444Z,1516696041.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:21.843Z,1516696041.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:22.249Z,1516696042.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:22.657Z,1516696042.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:23.051Z,1516696043.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:23.443Z,1516696043.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:23.844Z,1516696043.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:24.251Z,1516696044.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:24.646Z,1516696044.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:25.048Z,1516696045.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:25.442Z,1516696045.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:25.843Z,1516696045.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:26.253Z,1516696046.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:26.651Z,1516696046.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:27.052Z,1516696047.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:27.444Z,1516696047.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:27.843Z,1516696047.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:28.249Z,1516696048.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:28.647Z,1516696048.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:29.051Z,1516696049.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:29.443Z,1516696049.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:29.844Z,1516696049.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:30.251Z,1516696050.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:30.649Z,1516696050.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:31.053Z,1516696051.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:31.422Z,1516696051.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:31.825Z,1516696051.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:32.254Z,1516696052.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:32.650Z,1516696052.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:33.053Z,1516696053.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:33.427Z,1516696053.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:33.828Z,1516696053.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:34.251Z,1516696054.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:34.671Z,1516696054.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:35.054Z,1516696055.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:35.436Z,1516696055.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:35.832Z,1516696055.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:36.234Z,1516696056.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:36.659Z,1516696056.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:37.062Z,1516696057.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:37.429Z,1516696057.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:37.831Z,1516696057.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:38.268Z,1516696058.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:38.634Z,1516696058.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:39.062Z,1516696059.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:39.443Z,1516696059.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:39.836Z,1516696059.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:40.246Z,1516696060.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:40.642Z,1516696060.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:41.041Z,1516696061.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:41.437Z,1516696061.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:41.841Z,1516696061.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:42.241Z,1516696062.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:42.638Z,1516696062.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:43.045Z,1516696063.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:43.434Z,1516696063.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:43.833Z,1516696063.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:44.243Z,1516696064.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:44.645Z,1516696064.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:45.046Z,1516696065.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:45.445Z,1516696065.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:45.841Z,1516696065.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:46.233Z,1516696066.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:46.644Z,1516696066.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:47.045Z,1516696067.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:47.445Z,1516696067.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:47.846Z,1516696067.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:48.245Z,1516696068.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:48.639Z,1516696068.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:49.045Z,1516696069.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:49.436Z,1516696069.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:49.839Z,1516696069.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:50.243Z,1516696070.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:50.651Z,1516696070.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:51.047Z,1516696071.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:51.447Z,1516696071.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:51.838Z,1516696071.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:52.243Z,1516696072.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:52.645Z,1516696072.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:53.039Z,1516696073.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:53.457Z,1516696073.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:53.857Z,1516696073.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:54.257Z,1516696074.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:54.644Z,1516696074.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:55.042Z,1516696075.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:55.444Z,1516696075.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:55.843Z,1516696075.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:56.250Z,1516696076.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:59.335Z,1516696079.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:59.489Z,1516696079.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:27:59.825Z,1516696079.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:00.197Z,1516696080.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x25759 got:0x62499 2018-01-23T08:28:00.232Z,1516696080.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:00.630Z,1516696080.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:01.005Z,1516696081.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:01.435Z,1516696081.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:01.831Z,1516696081.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:02.229Z,1516696082.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:02.607Z,1516696082.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:02.999Z,1516696082.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:03.409Z,1516696083.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:03.805Z,1516696083.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:04.199Z,1516696084.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:04.618Z,1516696084.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:05.015Z,1516696085.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:05.435Z,1516696085.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:05.801Z,1516696085.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:06.206Z,1516696086.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:06.608Z,1516696086.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:07.002Z,1516696087.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:07.411Z,1516696087.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:07.817Z,1516696087.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:08.217Z,1516696088.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:08.643Z,1516696088.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:08.000Z,1516696089.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:09.401Z,1516696089.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:09.803Z,1516696089.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:09.803Z,1516696089.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104 2018-01-23T08:28:09.803Z,1516696089.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:28:09.806Z,1516696089.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:09.806Z,1516696089.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104 2018-01-23T08:28:09.806Z,1516696089.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:28:09.809Z,1516696089.809 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:09.809Z,1516696089.809 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104 2018-01-23T08:28:09.809Z,1516696089.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:28:09.821Z,1516696089.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:28:09.821Z,1516696089.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:28:09.821Z,1516696089.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:28:10.220Z,1516696090.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:28:10.220Z,1516696090.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104 2018-01-23T08:28:10.220Z,1516696090.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:28:10.220Z,1516696090.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104 2018-01-23T08:28:10.221Z,1516696090.221 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:28:10.221Z,1516696090.221 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104 2018-01-23T08:28:10.620Z,1516696090.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:28:10.621Z,1516696090.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:28:10.621Z,1516696090.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:28:10.622Z,1516696090.622 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:28:10.627Z,1516696090.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:28:10.628Z,1516696090.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:28:10.628Z,1516696090.628 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:28:10.629Z,1516696090.629 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:28:10.629Z,1516696090.629 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:28:11.017Z,1516696091.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:28:11.018Z,1516696091.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:11.420Z,1516696091.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:28:11.421Z,1516696091.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:11.805Z,1516696091.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:28:11.805Z,1516696091.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:12.208Z,1516696092.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:28:12.209Z,1516696092.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:12.607Z,1516696092.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:28:12.608Z,1516696092.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:13.010Z,1516696093.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:28:13.012Z,1516696093.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:13.411Z,1516696093.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:28:13.412Z,1516696093.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:13.814Z,1516696093.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:28:13.815Z,1516696093.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:14.210Z,1516696094.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:28:14.211Z,1516696094.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:14.611Z,1516696094.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:28:14.612Z,1516696094.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:15.007Z,1516696095.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:28:15.008Z,1516696095.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:15.407Z,1516696095.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:28:15.408Z,1516696095.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:15.817Z,1516696095.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:28:15.819Z,1516696095.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:16.207Z,1516696096.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:28:16.208Z,1516696096.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:16.611Z,1516696096.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:28:16.612Z,1516696096.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:17.018Z,1516696097.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:28:17.020Z,1516696097.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:17.421Z,1516696097.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:28:17.422Z,1516696097.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:17.820Z,1516696097.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:28:17.822Z,1516696097.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:18.218Z,1516696098.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:28:18.219Z,1516696098.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:18.597Z,1516696098.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:28:18.598Z,1516696098.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:19.020Z,1516696099.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:28:19.021Z,1516696099.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:19.406Z,1516696099.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:28:19.419Z,1516696099.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:19.829Z,1516696099.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:28:19.830Z,1516696099.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:20.205Z,1516696100.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:28:20.206Z,1516696100.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:20.608Z,1516696100.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:28:20.609Z,1516696100.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:21.003Z,1516696101.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:28:21.004Z,1516696101.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:21.399Z,1516696101.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:28:21.400Z,1516696101.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:21.802Z,1516696101.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:28:21.807Z,1516696101.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:22.201Z,1516696102.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:28:22.202Z,1516696102.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:22.609Z,1516696102.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:28:22.610Z,1516696102.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:23.014Z,1516696103.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:28:23.016Z,1516696103.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:23.420Z,1516696103.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:28:23.421Z,1516696103.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:23.808Z,1516696103.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:28:23.809Z,1516696103.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:24.213Z,1516696104.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:28:24.214Z,1516696104.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:24.608Z,1516696104.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:28:24.608Z,1516696104.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:25.001Z,1516696105.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:28:25.002Z,1516696105.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:25.418Z,1516696105.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:28:25.419Z,1516696105.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:25.814Z,1516696105.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:28:25.815Z,1516696105.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:26.213Z,1516696106.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:28:26.214Z,1516696106.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:26.604Z,1516696106.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:28:26.605Z,1516696106.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:27.013Z,1516696107.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:28:27.014Z,1516696107.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:27.406Z,1516696107.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:28:27.407Z,1516696107.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:27.809Z,1516696107.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:28:27.810Z,1516696107.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:28.211Z,1516696108.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:28:28.212Z,1516696108.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:28.628Z,1516696108.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:28:28.629Z,1516696108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:29.021Z,1516696109.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:28:29.022Z,1516696109.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:29.413Z,1516696109.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:28:29.414Z,1516696109.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:29.814Z,1516696109.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:30.209Z,1516696110.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:30.616Z,1516696110.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:31.013Z,1516696111.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:31.418Z,1516696111.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:31.816Z,1516696111.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:32.217Z,1516696112.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:32.615Z,1516696112.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:33.012Z,1516696113.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:33.409Z,1516696113.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:33.792Z,1516696113.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:34.197Z,1516696114.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:34.629Z,1516696114.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:35.019Z,1516696115.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:35.417Z,1516696115.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:35.822Z,1516696115.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:36.200Z,1516696116.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:36.597Z,1516696116.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:37.001Z,1516696117.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:37.434Z,1516696117.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:37.810Z,1516696117.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:38.214Z,1516696118.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:38.600Z,1516696118.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:39.001Z,1516696119.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:39.399Z,1516696119.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:39.809Z,1516696119.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:40.205Z,1516696120.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:40.605Z,1516696120.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:41.005Z,1516696121.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:41.413Z,1516696121.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:41.817Z,1516696121.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:42.204Z,1516696122.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:42.605Z,1516696122.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:43.008Z,1516696123.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:43.411Z,1516696123.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:43.814Z,1516696123.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:44.214Z,1516696124.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:44.606Z,1516696124.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:45.005Z,1516696125.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:45.407Z,1516696125.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:45.812Z,1516696125.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:46.208Z,1516696126.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:46.617Z,1516696126.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:47.016Z,1516696127.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:47.418Z,1516696127.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:47.811Z,1516696127.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:48.212Z,1516696128.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:48.608Z,1516696128.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:49.013Z,1516696129.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:49.423Z,1516696129.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:49.825Z,1516696129.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:50.214Z,1516696130.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:50.599Z,1516696130.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:50.997Z,1516696130.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:51.401Z,1516696131.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:51.796Z,1516696131.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:52.201Z,1516696132.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:52.606Z,1516696132.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:53.012Z,1516696133.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:53.414Z,1516696133.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:53.799Z,1516696133.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:54.200Z,1516696134.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:54.604Z,1516696134.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:54.999Z,1516696134.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:55.412Z,1516696135.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:55.810Z,1516696135.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:56.209Z,1516696136.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:56.602Z,1516696136.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:59.703Z,1516696139.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:28:59.849Z,1516696139.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:00.204Z,1516696140.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:00.613Z,1516696140.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:00.996Z,1516696140.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:01.397Z,1516696141.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:01.793Z,1516696141.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:02.181Z,1516696142.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:02.613Z,1516696142.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:03.016Z,1516696143.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:03.413Z,1516696143.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:03.781Z,1516696143.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:04.214Z,1516696144.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:04.589Z,1516696144.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:04.988Z,1516696144.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:05.410Z,1516696145.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:05.815Z,1516696145.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:06.201Z,1516696146.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:06.600Z,1516696146.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:06.997Z,1516696146.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:07.399Z,1516696147.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:07.800Z,1516696147.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:08.199Z,1516696148.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:08.599Z,1516696148.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:08.000Z,1516696149.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:09.399Z,1516696149.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:09.805Z,1516696149.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:10.199Z,1516696150.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:10.592Z,1516696150.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:10.991Z,1516696150.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:11.405Z,1516696151.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:11.801Z,1516696151.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:12.203Z,1516696152.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:12.590Z,1516696152.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:12.997Z,1516696152.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:13.402Z,1516696153.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:13.802Z,1516696153.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:14.209Z,1516696154.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:14.594Z,1516696154.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:14.991Z,1516696154.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:15.402Z,1516696155.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:15.801Z,1516696155.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:16.203Z,1516696156.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:16.591Z,1516696156.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:16.994Z,1516696156.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:17.402Z,1516696157.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:17.802Z,1516696157.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:18.202Z,1516696158.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:18.592Z,1516696158.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:18.996Z,1516696158.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:19.401Z,1516696159.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:19.805Z,1516696159.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:20.202Z,1516696160.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:20.597Z,1516696160.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:20.991Z,1516696160.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:21.402Z,1516696161.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:21.802Z,1516696161.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:22.208Z,1516696162.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:22.590Z,1516696162.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:22.994Z,1516696162.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:23.392Z,1516696163.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:23.802Z,1516696163.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:24.202Z,1516696164.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:24.608Z,1516696164.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:24.990Z,1516696164.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:25.389Z,1516696165.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:25.797Z,1516696165.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:26.197Z,1516696166.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:26.602Z,1516696166.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:27.006Z,1516696167.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:27.414Z,1516696167.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:27.790Z,1516696167.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:28.195Z,1516696168.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:28.596Z,1516696168.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:28.996Z,1516696168.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:29.394Z,1516696169.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:29.803Z,1516696169.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:30.202Z,1516696170.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:30.610Z,1516696170.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:30.990Z,1516696170.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:31.405Z,1516696171.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:31.797Z,1516696171.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:32.196Z,1516696172.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:32.602Z,1516696172.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:33.006Z,1516696173.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:33.402Z,1516696173.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:33.796Z,1516696173.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:34.199Z,1516696174.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:34.580Z,1516696174.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:35.004Z,1516696175.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:35.387Z,1516696175.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:35.809Z,1516696175.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:36.214Z,1516696176.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:36.613Z,1516696176.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:37.009Z,1516696177.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:37.416Z,1516696177.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:37.785Z,1516696177.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:38.185Z,1516696178.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:38.614Z,1516696178.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:39.009Z,1516696179.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:39.401Z,1516696179.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:39.788Z,1516696179.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:40.192Z,1516696180.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:40.590Z,1516696180.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:40.991Z,1516696180.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:41.389Z,1516696181.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:41.802Z,1516696181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:42.201Z,1516696182.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:42.609Z,1516696182.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:43.001Z,1516696183.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:43.396Z,1516696183.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:43.791Z,1516696183.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:44.197Z,1516696184.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:44.602Z,1516696184.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:45.003Z,1516696185.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:45.403Z,1516696185.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:45.791Z,1516696185.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:46.203Z,1516696186.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:46.591Z,1516696186.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:47.001Z,1516696187.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:47.395Z,1516696187.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:47.809Z,1516696187.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:48.209Z,1516696188.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:48.605Z,1516696188.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:49.002Z,1516696189.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:49.397Z,1516696189.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:49.794Z,1516696189.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:50.190Z,1516696190.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:50.610Z,1516696190.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:51.004Z,1516696191.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:51.426Z,1516696191.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:51.813Z,1516696191.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:52.219Z,1516696192.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:52.579Z,1516696192.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:53.013Z,1516696193.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:53.387Z,1516696193.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:53.816Z,1516696193.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:54.198Z,1516696194.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:54.601Z,1516696194.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:54.986Z,1516696194.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:55.393Z,1516696195.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:55.788Z,1516696195.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:56.193Z,1516696196.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:56.594Z,1516696196.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:29:57.005Z,1516696197.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:00.102Z,1516696200.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:00.237Z,1516696200.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:00.591Z,1516696200.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:00.996Z,1516696200.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:01.395Z,1516696201.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:01.804Z,1516696201.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:02.199Z,1516696202.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:02.605Z,1516696202.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:02.991Z,1516696202.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:03.405Z,1516696203.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:03.799Z,1516696203.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:04.176Z,1516696204.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:04.606Z,1516696204.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:05.009Z,1516696205.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:05.402Z,1516696205.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:05.779Z,1516696205.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:06.185Z,1516696206.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:06.589Z,1516696206.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:06.985Z,1516696206.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:07.393Z,1516696207.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:07.798Z,1516696207.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:08.193Z,1516696208.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:08.594Z,1516696208.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:08.987Z,1516696208.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:09.384Z,1516696209.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:09.784Z,1516696209.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:10.185Z,1516696210.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:10.589Z,1516696210.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:10.994Z,1516696210.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:11.393Z,1516696211.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:11.784Z,1516696211.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:12.185Z,1516696212.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:12.593Z,1516696212.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:12.989Z,1516696212.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:13.386Z,1516696213.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:13.794Z,1516696213.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:14.197Z,1516696214.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:14.594Z,1516696214.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:14.986Z,1516696214.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:15.385Z,1516696215.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:15.785Z,1516696215.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:16.186Z,1516696216.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:16.594Z,1516696216.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:17.005Z,1516696217.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:17.401Z,1516696217.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:17.789Z,1516696217.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:18.188Z,1516696218.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:18.588Z,1516696218.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:18.985Z,1516696218.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:19.385Z,1516696219.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:19.794Z,1516696219.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:20.197Z,1516696220.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:20.594Z,1516696220.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:20.987Z,1516696220.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:21.392Z,1516696221.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:21.790Z,1516696221.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:22.188Z,1516696222.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:22.600Z,1516696222.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:22.998Z,1516696222.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:23.396Z,1516696223.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:23.787Z,1516696223.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:24.187Z,1516696224.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:24.587Z,1516696224.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:24.987Z,1516696224.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:25.387Z,1516696225.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:25.799Z,1516696225.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:26.199Z,1516696226.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:26.598Z,1516696226.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:26.997Z,1516696226.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:27.389Z,1516696227.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:27.793Z,1516696227.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:28.189Z,1516696228.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:28.599Z,1516696228.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:29.003Z,1516696229.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:29.395Z,1516696229.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:29.789Z,1516696229.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:30.184Z,1516696230.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:30.576Z,1516696230.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:30.976Z,1516696230.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:31.378Z,1516696231.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:31.808Z,1516696231.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:32.209Z,1516696232.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:32.590Z,1516696232.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:32.989Z,1516696232.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:33.384Z,1516696233.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:33.787Z,1516696233.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:34.186Z,1516696234.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:34.593Z,1516696234.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:34.997Z,1516696234.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:35.397Z,1516696235.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:35.791Z,1516696235.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:36.186Z,1516696236.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:36.594Z,1516696236.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:36.989Z,1516696236.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:37.387Z,1516696237.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:37.793Z,1516696237.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:38.197Z,1516696238.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:38.593Z,1516696238.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:38.991Z,1516696238.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:39.395Z,1516696239.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:39.789Z,1516696239.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:40.192Z,1516696240.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:40.655Z,1516696240.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:41.004Z,1516696241.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:41.427Z,1516696241.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:41.820Z,1516696241.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:42.217Z,1516696242.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:42.624Z,1516696242.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:43.037Z,1516696243.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:43.385Z,1516696243.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:43.794Z,1516696243.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:44.197Z,1516696244.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:44.624Z,1516696244.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:45.002Z,1516696245.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:45.406Z,1516696245.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:45.797Z,1516696245.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:46.246Z,1516696246.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:46.649Z,1516696246.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:47.005Z,1516696247.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:47.405Z,1516696247.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:47.811Z,1516696247.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:48.197Z,1516696248.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:48.605Z,1516696248.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:48.998Z,1516696248.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:49.399Z,1516696249.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:49.809Z,1516696249.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:50.248Z,1516696250.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:50.611Z,1516696250.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:51.015Z,1516696251.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:51.440Z,1516696251.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:51.813Z,1516696251.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:52.181Z,1516696252.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:52.607Z,1516696252.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:53.012Z,1516696253.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:53.413Z,1516696253.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:53.779Z,1516696253.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:54.180Z,1516696254.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:54.585Z,1516696254.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:54.984Z,1516696254.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:55.384Z,1516696255.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:55.794Z,1516696255.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:56.197Z,1516696256.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:56.586Z,1516696256.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:56.992Z,1516696256.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:30:57.389Z,1516696257.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:00.471Z,1516696260.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:00.596Z,1516696260.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:00.961Z,1516696260.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:01.356Z,1516696261.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:01.754Z,1516696261.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:02.153Z,1516696262.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:02.546Z,1516696262.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:02.943Z,1516696262.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:03.342Z,1516696263.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:03.765Z,1516696263.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:04.150Z,1516696264.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:04.550Z,1516696264.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:04.943Z,1516696264.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:05.343Z,1516696265.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:05.754Z,1516696265.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:06.148Z,1516696266.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:06.558Z,1516696266.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:06.961Z,1516696266.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:07.416Z,1516696267.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:07.743Z,1516696267.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:08.134Z,1516696268.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:08.535Z,1516696268.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:08.000Z,1516696269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:09.354Z,1516696269.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:09.747Z,1516696269.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.137Z,1516696270.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.537Z,1516696270.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.935Z,1516696270.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.936Z,1516696270.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105 2018-01-23T08:31:10.936Z,1516696270.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:31:10.937Z,1516696270.937 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.937Z,1516696270.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105 2018-01-23T08:31:10.938Z,1516696270.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:31:10.939Z,1516696270.939 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:10.939Z,1516696270.939 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105 2018-01-23T08:31:10.939Z,1516696270.939 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:31:10.952Z,1516696270.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:31:10.952Z,1516696270.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:31:10.952Z,1516696270.952 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:31:11.342Z,1516696271.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:31:11.342Z,1516696271.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105 2018-01-23T08:31:11.343Z,1516696271.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:31:11.343Z,1516696271.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105 2018-01-23T08:31:11.344Z,1516696271.344 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:31:11.344Z,1516696271.344 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105 2018-01-23T08:31:11.768Z,1516696271.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:31:11.768Z,1516696271.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:31:11.768Z,1516696271.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:31:11.769Z,1516696271.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:31:11.769Z,1516696271.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:31:11.769Z,1516696271.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:31:11.770Z,1516696271.770 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:31:11.770Z,1516696271.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:31:11.771Z,1516696271.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:31:12.152Z,1516696272.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:31:12.153Z,1516696272.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:12.541Z,1516696272.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:31:12.542Z,1516696272.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:12.941Z,1516696272.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:31:12.942Z,1516696272.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:13.368Z,1516696273.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:31:13.369Z,1516696273.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:13.737Z,1516696273.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:31:13.738Z,1516696273.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:14.143Z,1516696274.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:31:14.144Z,1516696274.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:14.541Z,1516696274.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:31:14.542Z,1516696274.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:14.968Z,1516696274.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:31:14.969Z,1516696274.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:15.350Z,1516696275.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:31:15.367Z,1516696275.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:15.753Z,1516696275.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:31:15.754Z,1516696275.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:16.139Z,1516696276.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:31:16.140Z,1516696276.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:16.542Z,1516696276.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:31:16.543Z,1516696276.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:16.952Z,1516696276.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:31:16.953Z,1516696276.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:17.345Z,1516696277.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:31:17.346Z,1516696277.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:17.754Z,1516696277.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:31:17.755Z,1516696277.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:18.160Z,1516696278.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:31:18.161Z,1516696278.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:18.552Z,1516696278.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:31:18.552Z,1516696278.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:18.948Z,1516696278.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:31:18.949Z,1516696278.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:19.352Z,1516696279.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:31:19.353Z,1516696279.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:19.744Z,1516696279.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:31:19.745Z,1516696279.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:20.151Z,1516696280.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:31:20.152Z,1516696280.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:20.549Z,1516696280.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:31:20.550Z,1516696280.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:20.960Z,1516696280.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:31:20.961Z,1516696280.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:21.356Z,1516696281.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:31:21.357Z,1516696281.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:21.763Z,1516696281.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:31:21.764Z,1516696281.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:22.148Z,1516696282.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:31:22.149Z,1516696282.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:22.553Z,1516696282.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:31:22.554Z,1516696282.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:22.946Z,1516696282.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:31:22.947Z,1516696282.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:23.344Z,1516696283.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:31:23.345Z,1516696283.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:23.758Z,1516696283.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:31:23.759Z,1516696283.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:24.158Z,1516696284.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:31:24.159Z,1516696284.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:24.560Z,1516696284.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:31:24.561Z,1516696284.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:24.951Z,1516696284.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:31:24.952Z,1516696284.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:25.352Z,1516696285.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:31:25.353Z,1516696285.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:25.760Z,1516696285.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:31:25.761Z,1516696285.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:26.155Z,1516696286.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:31:26.156Z,1516696286.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:26.559Z,1516696286.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:31:26.560Z,1516696286.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:26.960Z,1516696286.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:31:26.961Z,1516696286.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:27.370Z,1516696287.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:31:27.371Z,1516696287.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:27.761Z,1516696287.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:31:27.762Z,1516696287.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:28.160Z,1516696288.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:31:28.161Z,1516696288.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:28.525Z,1516696288.525 [PNI_TCM](ERROR): CRC does not match. Expected:0x17702 got:0x13554 2018-01-23T08:31:28.564Z,1516696288.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:31:28.565Z,1516696288.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:28.960Z,1516696288.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:31:28.961Z,1516696288.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:29.329Z,1516696289.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:31:29.331Z,1516696289.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:29.760Z,1516696289.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:31:29.761Z,1516696289.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:30.166Z,1516696290.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:31:30.167Z,1516696290.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:30.565Z,1516696290.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:31:30.566Z,1516696290.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:30.956Z,1516696290.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:31.342Z,1516696291.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:31.742Z,1516696291.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:32.168Z,1516696292.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:32.571Z,1516696292.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:32.966Z,1516696292.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:33.373Z,1516696293.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:33.777Z,1516696293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:34.161Z,1516696294.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:34.546Z,1516696294.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:34.942Z,1516696294.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:35.363Z,1516696295.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:35.759Z,1516696295.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:36.148Z,1516696296.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:36.549Z,1516696296.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:36.968Z,1516696296.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:37.354Z,1516696297.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:37.747Z,1516696297.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:38.151Z,1516696298.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:38.554Z,1516696298.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:38.960Z,1516696298.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:39.355Z,1516696299.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:39.753Z,1516696299.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:40.158Z,1516696300.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:40.545Z,1516696300.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:40.950Z,1516696300.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:41.353Z,1516696301.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:41.753Z,1516696301.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:42.159Z,1516696302.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:42.561Z,1516696302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:42.965Z,1516696302.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:43.345Z,1516696303.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:43.748Z,1516696303.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:44.153Z,1516696304.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:44.546Z,1516696304.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:44.952Z,1516696304.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:45.356Z,1516696305.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:45.764Z,1516696305.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:46.156Z,1516696306.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:46.554Z,1516696306.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:46.949Z,1516696306.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:47.338Z,1516696307.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:47.756Z,1516696307.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:48.165Z,1516696308.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:48.569Z,1516696308.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:48.948Z,1516696308.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:49.357Z,1516696309.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:49.745Z,1516696309.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:50.140Z,1516696310.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:50.555Z,1516696310.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:50.958Z,1516696310.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:51.358Z,1516696311.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:51.761Z,1516696311.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:52.169Z,1516696312.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:52.540Z,1516696312.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:52.946Z,1516696312.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:53.337Z,1516696313.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:53.746Z,1516696313.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:54.145Z,1516696314.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:54.542Z,1516696314.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:54.939Z,1516696314.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:55.338Z,1516696315.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:55.738Z,1516696315.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:55.741Z,1516696315.741 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:26:55.5Z 2018-01-23T08:31:55.742Z,1516696315.742 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:31:55.742Z,1516696315.742 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:31:56.145Z,1516696316.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:56.679Z,1516696316.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:31:56.974Z,1516696316.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:00.054Z,1516696320.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:00.138Z,1516696320.138 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0124.lzma 2018-01-23T08:32:00.226Z,1516696320.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:00.575Z,1516696320.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:00.905Z,1516696320.905 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0124.lzma.bak 2018-01-23T08:32:00.905Z,1516696320.905 [DataOverHttps](INFO): SBD MOMSN=7755281 2018-01-23T08:32:00.961Z,1516696320.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:03.213Z,1516696323.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:03.349Z,1516696323.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:06.411Z,1516696326.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:06.561Z,1516696326.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:06.912Z,1516696326.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:07.318Z,1516696327.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:07.721Z,1516696327.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:08.116Z,1516696328.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:11.206Z,1516696331.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:11.288Z,1516696331.288 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0125.lzma 2018-01-23T08:32:11.364Z,1516696331.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:11.679Z,1516696331.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:12.030Z,1516696332.030 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0125.lzma.bak 2018-01-23T08:32:12.030Z,1516696332.030 [DataOverHttps](INFO): SBD MOMSN=7755283 2018-01-23T08:32:12.108Z,1516696332.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:12.705Z,1516696332.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:12.709Z,1516696332.709 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:32:12.709Z,1516696332.709 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:32:12.709Z,1516696332.709 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:32:12.881Z,1516696332.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:15.971Z,1516696335.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:16.109Z,1516696336.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:16.481Z,1516696336.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:16.878Z,1516696336.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:17.267Z,1516696337.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:17.698Z,1516696337.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:18.068Z,1516696338.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:18.477Z,1516696338.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:18.878Z,1516696338.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:19.288Z,1516696339.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:19.681Z,1516696339.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:20.075Z,1516696340.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:20.478Z,1516696340.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:20.870Z,1516696340.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:21.275Z,1516696341.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:21.684Z,1516696341.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:22.089Z,1516696342.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:22.478Z,1516696342.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:22.871Z,1516696342.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:23.277Z,1516696343.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:23.683Z,1516696343.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:24.082Z,1516696344.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:24.497Z,1516696344.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:24.874Z,1516696344.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:25.280Z,1516696345.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:25.689Z,1516696345.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:26.086Z,1516696346.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:26.488Z,1516696346.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:26.879Z,1516696346.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:27.276Z,1516696347.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:27.688Z,1516696347.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:28.089Z,1516696348.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:28.491Z,1516696348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:28.888Z,1516696348.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:29.284Z,1516696349.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:29.660Z,1516696349.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:30.059Z,1516696350.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:30.464Z,1516696350.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:30.887Z,1516696350.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:31.289Z,1516696351.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:31.684Z,1516696351.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:32.089Z,1516696352.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:32.468Z,1516696352.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:32.864Z,1516696352.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:33.269Z,1516696353.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:33.672Z,1516696353.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:34.094Z,1516696354.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:34.486Z,1516696354.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:34.897Z,1516696354.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:35.273Z,1516696355.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:35.667Z,1516696355.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:36.074Z,1516696356.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:36.466Z,1516696356.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:36.874Z,1516696356.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:37.299Z,1516696357.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:37.697Z,1516696357.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:38.072Z,1516696358.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:38.467Z,1516696358.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:38.873Z,1516696358.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:39.266Z,1516696359.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:39.672Z,1516696359.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:40.097Z,1516696360.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:40.474Z,1516696360.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:40.899Z,1516696360.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:41.273Z,1516696361.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:41.673Z,1516696361.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:42.068Z,1516696362.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:42.466Z,1516696362.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:42.870Z,1516696362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:43.273Z,1516696363.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:43.697Z,1516696363.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:44.099Z,1516696364.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:44.472Z,1516696364.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:44.869Z,1516696364.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:45.268Z,1516696365.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:45.677Z,1516696365.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:46.097Z,1516696366.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:46.438Z,1516696366.438 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:32:46.438Z,1516696366.438 [NAL9602] Data Fault, FailCount= 4 2018-01-23T08:32:46.438Z,1516696366.438 [NAL9602](ERROR): Data Fault 2018-01-23T08:32:46.469Z,1516696366.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:46.503Z,1516696366.503 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:32:46.848Z,1516696366.848 [NAL9602](INFO): Powering down 2018-01-23T08:32:46.881Z,1516696366.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:47.275Z,1516696367.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:47.704Z,1516696367.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:47.729Z,1516696367.729 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:32:47.729Z,1516696367.729 [NAL9602] No Fault, FailCount= 4 2018-01-23T08:32:48.068Z,1516696368.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:48.471Z,1516696368.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:48.879Z,1516696368.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:49.270Z,1516696369.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:49.669Z,1516696369.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:50.077Z,1516696370.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:50.478Z,1516696370.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:50.873Z,1516696370.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:51.283Z,1516696371.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:51.672Z,1516696371.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:52.077Z,1516696372.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:52.476Z,1516696372.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:52.880Z,1516696372.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:53.276Z,1516696373.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:53.683Z,1516696373.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:54.073Z,1516696374.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:54.468Z,1516696374.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:54.876Z,1516696374.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:55.278Z,1516696375.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:55.664Z,1516696375.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:56.058Z,1516696376.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:56.458Z,1516696376.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:56.859Z,1516696376.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:57.269Z,1516696377.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:57.667Z,1516696377.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:58.063Z,1516696378.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:58.466Z,1516696378.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:58.865Z,1516696378.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:59.262Z,1516696379.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:32:59.665Z,1516696379.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:00.063Z,1516696380.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:00.462Z,1516696380.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:00.867Z,1516696380.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:01.273Z,1516696381.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:01.663Z,1516696381.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:02.066Z,1516696382.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:02.476Z,1516696382.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:02.865Z,1516696382.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:03.266Z,1516696383.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:03.676Z,1516696383.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:04.063Z,1516696384.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:04.471Z,1516696384.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:04.867Z,1516696384.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:05.264Z,1516696385.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:05.673Z,1516696385.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:06.069Z,1516696386.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:06.464Z,1516696386.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:06.873Z,1516696386.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:07.270Z,1516696387.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:07.664Z,1516696387.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:08.069Z,1516696388.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:08.466Z,1516696388.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:08.866Z,1516696388.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:09.277Z,1516696389.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:09.666Z,1516696389.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:10.064Z,1516696390.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:10.477Z,1516696390.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:10.866Z,1516696390.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:11.265Z,1516696391.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:11.681Z,1516696391.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:12.070Z,1516696392.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:12.468Z,1516696392.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:12.877Z,1516696392.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:13.268Z,1516696393.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:16.363Z,1516696396.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:16.507Z,1516696396.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:16.826Z,1516696396.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:17.192Z,1516696397.192 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:33:17.244Z,1516696397.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:17.629Z,1516696397.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:18.037Z,1516696398.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:18.424Z,1516696398.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:18.829Z,1516696398.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:19.227Z,1516696399.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:19.627Z,1516696399.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:20.027Z,1516696400.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:20.437Z,1516696400.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:20.828Z,1516696400.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:21.229Z,1516696401.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:21.629Z,1516696401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:22.030Z,1516696402.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:22.432Z,1516696402.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:22.827Z,1516696402.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:23.227Z,1516696403.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:23.632Z,1516696403.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:24.036Z,1516696404.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:24.442Z,1516696404.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:24.832Z,1516696404.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:25.230Z,1516696405.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:25.633Z,1516696405.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:26.041Z,1516696406.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:26.430Z,1516696406.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:26.834Z,1516696406.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:27.237Z,1516696407.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:27.620Z,1516696407.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:28.056Z,1516696408.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:28.392Z,1516696408.392 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:33:28.424Z,1516696408.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:28.828Z,1516696408.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:29.254Z,1516696409.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:29.651Z,1516696409.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:30.033Z,1516696410.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:30.437Z,1516696410.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:30.829Z,1516696410.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:31.257Z,1516696411.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:31.642Z,1516696411.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:32.030Z,1516696412.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:32.427Z,1516696412.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:32.826Z,1516696412.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:33.226Z,1516696413.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:33.637Z,1516696413.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:34.037Z,1516696414.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:34.442Z,1516696414.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:34.846Z,1516696414.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:35.232Z,1516696415.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:35.635Z,1516696415.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:36.035Z,1516696416.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:36.431Z,1516696416.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:36.836Z,1516696416.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:37.241Z,1516696417.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:37.646Z,1516696417.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:38.039Z,1516696418.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:38.433Z,1516696418.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:38.830Z,1516696418.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:39.235Z,1516696419.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:39.635Z,1516696419.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:40.041Z,1516696420.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:40.448Z,1516696420.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:40.840Z,1516696420.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:41.230Z,1516696421.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:41.635Z,1516696421.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:42.035Z,1516696422.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:42.439Z,1516696422.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:42.837Z,1516696422.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:43.240Z,1516696423.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:43.649Z,1516696423.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:44.039Z,1516696424.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:44.435Z,1516696424.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:44.838Z,1516696424.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:45.234Z,1516696425.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:45.633Z,1516696425.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:46.041Z,1516696426.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:46.439Z,1516696426.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:46.842Z,1516696426.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:47.237Z,1516696427.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:47.641Z,1516696427.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:48.019Z,1516696428.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:48.420Z,1516696428.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:48.845Z,1516696428.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:49.247Z,1516696429.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:49.652Z,1516696429.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:50.030Z,1516696430.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:50.427Z,1516696430.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:50.826Z,1516696430.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:51.232Z,1516696431.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:51.636Z,1516696431.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:52.033Z,1516696432.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:52.437Z,1516696432.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:52.834Z,1516696432.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:53.227Z,1516696433.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:53.626Z,1516696433.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:54.036Z,1516696434.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:54.428Z,1516696434.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:54.826Z,1516696434.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:55.237Z,1516696435.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:55.633Z,1516696435.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:56.037Z,1516696436.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:56.437Z,1516696436.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:56.832Z,1516696436.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:57.232Z,1516696437.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:57.628Z,1516696437.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:58.040Z,1516696438.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:58.441Z,1516696438.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:58.833Z,1516696438.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:59.228Z,1516696439.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:33:59.633Z,1516696439.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:00.030Z,1516696440.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:00.430Z,1516696440.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:00.830Z,1516696440.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:01.246Z,1516696441.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:01.638Z,1516696441.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:02.040Z,1516696442.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:02.436Z,1516696442.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:02.833Z,1516696442.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:03.234Z,1516696443.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:03.630Z,1516696443.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:04.046Z,1516696444.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:04.439Z,1516696444.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:04.837Z,1516696444.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:05.228Z,1516696445.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:05.627Z,1516696445.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:06.037Z,1516696446.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:06.436Z,1516696446.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:06.839Z,1516696446.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:07.245Z,1516696447.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:07.641Z,1516696447.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:08.048Z,1516696448.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:08.436Z,1516696448.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:08.831Z,1516696448.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:09.235Z,1516696449.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:09.640Z,1516696449.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:10.042Z,1516696450.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:10.442Z,1516696450.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:10.840Z,1516696450.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:11.246Z,1516696451.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:11.644Z,1516696451.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:12.037Z,1516696452.037 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:12.037Z,1516696452.037 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106 2018-01-23T08:34:12.037Z,1516696452.037 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:34:12.040Z,1516696452.040 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:12.040Z,1516696452.040 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106 2018-01-23T08:34:12.040Z,1516696452.040 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:34:12.041Z,1516696452.041 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:12.042Z,1516696452.042 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106 2018-01-23T08:34:12.042Z,1516696452.042 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:34:12.054Z,1516696452.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:34:12.054Z,1516696452.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:34:12.054Z,1516696452.054 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:34:12.451Z,1516696452.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:34:12.451Z,1516696452.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106 2018-01-23T08:34:12.451Z,1516696452.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:34:12.452Z,1516696452.452 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106 2018-01-23T08:34:12.452Z,1516696452.452 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:34:12.452Z,1516696452.452 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106 2018-01-23T08:34:12.844Z,1516696452.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:34:12.844Z,1516696452.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:34:12.844Z,1516696452.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:34:12.845Z,1516696452.845 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:34:12.845Z,1516696452.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:34:12.846Z,1516696452.846 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:34:12.846Z,1516696452.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:34:12.846Z,1516696452.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:34:12.848Z,1516696452.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:34:13.253Z,1516696453.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:34:13.254Z,1516696453.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:13.647Z,1516696453.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:34:13.648Z,1516696453.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:16.744Z,1516696456.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T08:34:16.745Z,1516696456.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:16.868Z,1516696456.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:34:16.869Z,1516696456.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:17.216Z,1516696457.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:34:17.217Z,1516696457.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:17.621Z,1516696457.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:34:17.622Z,1516696457.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:18.028Z,1516696458.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:34:18.029Z,1516696458.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:18.428Z,1516696458.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:34:18.429Z,1516696458.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:18.463Z,1516696458.463 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:34:18.825Z,1516696458.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:34:18.826Z,1516696458.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:19.214Z,1516696459.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:34:19.215Z,1516696459.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:19.614Z,1516696459.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:34:19.615Z,1516696459.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:20.013Z,1516696460.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:34:20.014Z,1516696460.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:20.432Z,1516696460.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:34:20.433Z,1516696460.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:20.808Z,1516696460.808 [PNI_TCM](ERROR): CRC does not match. Expected:0x51850 got:0x16909 2018-01-23T08:34:20.832Z,1516696460.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:34:20.833Z,1516696460.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:21.232Z,1516696461.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:34:21.233Z,1516696461.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:21.623Z,1516696461.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:34:21.624Z,1516696461.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:22.024Z,1516696462.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:34:22.025Z,1516696462.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:22.416Z,1516696462.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:34:22.417Z,1516696462.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:22.824Z,1516696462.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:34:22.825Z,1516696462.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:23.228Z,1516696463.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:34:23.229Z,1516696463.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:23.622Z,1516696463.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:34:23.623Z,1516696463.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:24.026Z,1516696464.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:34:24.027Z,1516696464.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:24.427Z,1516696464.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:34:24.428Z,1516696464.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:24.828Z,1516696464.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:34:24.829Z,1516696464.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:25.232Z,1516696465.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:34:25.233Z,1516696465.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:25.618Z,1516696465.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:34:25.619Z,1516696465.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:26.024Z,1516696466.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:34:26.025Z,1516696466.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:26.422Z,1516696466.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:34:26.423Z,1516696466.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:26.813Z,1516696466.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:34:26.814Z,1516696466.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:27.225Z,1516696467.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:34:27.226Z,1516696467.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:27.636Z,1516696467.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:34:27.637Z,1516696467.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:28.025Z,1516696468.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:34:28.026Z,1516696468.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:28.424Z,1516696468.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:34:28.425Z,1516696468.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:28.820Z,1516696468.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:34:28.821Z,1516696468.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:29.221Z,1516696469.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:34:29.222Z,1516696469.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:29.620Z,1516696469.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:34:29.621Z,1516696469.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:30.040Z,1516696470.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:34:30.041Z,1516696470.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:30.432Z,1516696470.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:34:30.433Z,1516696470.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:30.836Z,1516696470.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:34:30.837Z,1516696470.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:31.219Z,1516696471.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:34:31.220Z,1516696471.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:31.618Z,1516696471.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:34:31.619Z,1516696471.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:32.028Z,1516696472.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:34:32.029Z,1516696472.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:32.421Z,1516696472.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:32.821Z,1516696472.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:33.233Z,1516696473.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:33.626Z,1516696473.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:34.027Z,1516696474.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:34.421Z,1516696474.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:34.839Z,1516696474.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:35.219Z,1516696475.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:35.624Z,1516696475.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:36.028Z,1516696476.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:36.460Z,1516696476.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:36.833Z,1516696476.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T08:34:36.866Z,1516696476.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:37.222Z,1516696477.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:37.625Z,1516696477.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:38.025Z,1516696478.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:38.426Z,1516696478.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:38.830Z,1516696478.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:39.234Z,1516696479.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:39.644Z,1516696479.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:40.036Z,1516696480.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:40.435Z,1516696480.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:40.830Z,1516696480.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:41.209Z,1516696481.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:41.611Z,1516696481.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:42.039Z,1516696482.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:42.441Z,1516696482.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:42.834Z,1516696482.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:43.215Z,1516696483.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:43.610Z,1516696483.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:44.027Z,1516696484.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:44.422Z,1516696484.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:44.841Z,1516696484.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:45.216Z,1516696485.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:45.621Z,1516696485.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:46.020Z,1516696486.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:46.425Z,1516696486.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:46.820Z,1516696486.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:47.229Z,1516696487.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:47.627Z,1516696487.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:48.035Z,1516696488.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:48.420Z,1516696488.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:48.830Z,1516696488.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:49.221Z,1516696489.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:49.624Z,1516696489.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:50.041Z,1516696490.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:50.435Z,1516696490.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:50.831Z,1516696490.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:51.224Z,1516696491.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:51.625Z,1516696491.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:52.034Z,1516696492.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:52.436Z,1516696492.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:52.830Z,1516696492.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:53.229Z,1516696493.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:53.636Z,1516696493.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:54.029Z,1516696494.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:54.441Z,1516696494.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:54.837Z,1516696494.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:55.233Z,1516696495.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:55.633Z,1516696495.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:56.037Z,1516696496.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:56.418Z,1516696496.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:56.846Z,1516696496.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:57.220Z,1516696497.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:57.609Z,1516696497.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:58.018Z,1516696498.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:58.425Z,1516696498.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:58.826Z,1516696498.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:59.213Z,1516696499.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:34:59.611Z,1516696499.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:00.021Z,1516696500.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:00.418Z,1516696500.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:00.824Z,1516696500.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:01.215Z,1516696501.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:01.616Z,1516696501.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:02.017Z,1516696502.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:02.421Z,1516696502.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:02.821Z,1516696502.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:03.212Z,1516696503.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:03.610Z,1516696503.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:04.021Z,1516696504.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:04.416Z,1516696504.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:04.821Z,1516696504.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:05.213Z,1516696505.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:05.616Z,1516696505.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:06.021Z,1516696506.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:06.456Z,1516696506.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:06.829Z,1516696506.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:07.216Z,1516696507.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:07.618Z,1516696507.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:08.026Z,1516696508.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:08.421Z,1516696508.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:08.821Z,1516696508.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:09.215Z,1516696509.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:09.621Z,1516696509.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:10.021Z,1516696510.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:10.425Z,1516696510.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:10.821Z,1516696510.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:11.214Z,1516696511.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:11.624Z,1516696511.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:12.021Z,1516696512.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:12.433Z,1516696512.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:12.833Z,1516696512.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:13.213Z,1516696513.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:13.619Z,1516696513.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:14.026Z,1516696514.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:17.309Z,1516696517.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:17.440Z,1516696517.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:17.793Z,1516696517.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:18.193Z,1516696518.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:18.585Z,1516696518.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:18.991Z,1516696518.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:19.390Z,1516696519.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:19.796Z,1516696519.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:20.194Z,1516696520.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:20.584Z,1516696520.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:20.984Z,1516696520.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:21.397Z,1516696521.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:21.788Z,1516696521.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:22.193Z,1516696522.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:22.593Z,1516696522.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:22.993Z,1516696522.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:23.388Z,1516696523.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:23.786Z,1516696523.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:24.186Z,1516696524.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:24.585Z,1516696524.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:24.986Z,1516696524.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:25.393Z,1516696525.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:25.792Z,1516696525.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:26.201Z,1516696526.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:26.593Z,1516696526.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:26.984Z,1516696526.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:27.392Z,1516696527.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:27.786Z,1516696527.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:28.194Z,1516696528.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:28.598Z,1516696528.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:28.994Z,1516696528.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:29.385Z,1516696529.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:29.792Z,1516696529.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:30.197Z,1516696530.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:30.590Z,1516696530.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:30.993Z,1516696530.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:31.397Z,1516696531.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:31.798Z,1516696531.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:32.205Z,1516696532.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:32.596Z,1516696532.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:32.996Z,1516696532.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:33.377Z,1516696533.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:33.781Z,1516696533.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:34.206Z,1516696534.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:34.610Z,1516696534.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:35.014Z,1516696535.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:35.384Z,1516696535.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:35.793Z,1516696535.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:36.191Z,1516696536.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:36.586Z,1516696536.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:36.990Z,1516696536.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:37.398Z,1516696537.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:37.802Z,1516696537.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:38.197Z,1516696538.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:38.592Z,1516696538.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:38.990Z,1516696538.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:39.389Z,1516696539.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:39.789Z,1516696539.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:40.196Z,1516696540.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:40.603Z,1516696540.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:41.047Z,1516696541.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:41.406Z,1516696541.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:41.818Z,1516696541.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:42.219Z,1516696542.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:42.618Z,1516696542.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:42.994Z,1516696542.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:43.405Z,1516696543.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:43.802Z,1516696543.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:44.196Z,1516696544.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:44.592Z,1516696544.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:45.010Z,1516696545.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:45.401Z,1516696545.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:45.807Z,1516696545.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:46.202Z,1516696546.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:46.649Z,1516696546.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:47.044Z,1516696547.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:47.437Z,1516696547.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:47.809Z,1516696547.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:48.227Z,1516696548.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:48.610Z,1516696548.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:49.053Z,1516696549.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:49.413Z,1516696549.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:49.817Z,1516696549.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:50.240Z,1516696550.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:50.594Z,1516696550.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:50.994Z,1516696550.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:51.424Z,1516696551.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:51.800Z,1516696551.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:52.205Z,1516696552.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:52.601Z,1516696552.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:53.001Z,1516696553.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:53.390Z,1516696553.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:53.789Z,1516696553.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:54.192Z,1516696554.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:54.586Z,1516696554.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:54.992Z,1516696554.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:55.402Z,1516696555.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:55.800Z,1516696555.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:56.194Z,1516696556.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:56.591Z,1516696556.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:56.987Z,1516696556.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:57.396Z,1516696557.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:57.788Z,1516696557.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:58.205Z,1516696558.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:58.601Z,1516696558.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:59.009Z,1516696559.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:59.388Z,1516696559.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:35:59.789Z,1516696559.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:00.187Z,1516696560.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:00.592Z,1516696560.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:00.996Z,1516696560.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:01.403Z,1516696561.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:01.797Z,1516696561.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:02.198Z,1516696562.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:02.589Z,1516696562.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:02.993Z,1516696562.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:03.393Z,1516696563.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:03.797Z,1516696563.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:04.200Z,1516696564.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:04.601Z,1516696564.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:05.001Z,1516696565.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:05.390Z,1516696565.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:05.796Z,1516696565.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:06.204Z,1516696566.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:06.572Z,1516696566.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x16451 got:0x33231 2018-01-23T08:36:06.597Z,1516696566.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:06.977Z,1516696566.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:07.401Z,1516696567.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:07.808Z,1516696567.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:08.204Z,1516696568.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:08.599Z,1516696568.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:08.981Z,1516696568.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:09.409Z,1516696569.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:09.776Z,1516696569.776 [PNI_TCM](ERROR): CRC does not match. Expected:0x1936 got:0x54630 2018-01-23T08:36:09.814Z,1516696569.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:10.210Z,1516696570.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:10.613Z,1516696570.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:11.010Z,1516696571.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:11.390Z,1516696571.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:11.785Z,1516696571.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:12.191Z,1516696572.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:12.609Z,1516696572.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:12.976Z,1516696572.976 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T08:36:12.993Z,1516696572.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:13.381Z,1516696573.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x30816 got:0x13555 2018-01-23T08:36:13.419Z,1516696573.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:13.791Z,1516696573.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:14.213Z,1516696574.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:17.272Z,1516696577.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x2586 got:0x34587 2018-01-23T08:36:17.272Z,1516696577.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x42795 got:0x13339 2018-01-23T08:36:17.273Z,1516696577.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x40983 got:0x1051 2018-01-23T08:36:17.273Z,1516696577.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x5188 got:0x4123 2018-01-23T08:36:17.274Z,1516696577.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x33607 got:0x23067 2018-01-23T08:36:17.274Z,1516696577.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x44536 got:0x60699 2018-01-23T08:36:17.274Z,1516696577.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x50975 got:0x53019 2018-01-23T08:36:17.337Z,1516696577.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:17.432Z,1516696577.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:17.841Z,1516696577.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:18.253Z,1516696578.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:18.647Z,1516696578.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:19.022Z,1516696579.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:19.418Z,1516696579.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:19.819Z,1516696579.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:20.250Z,1516696580.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:20.621Z,1516696580.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:21.022Z,1516696581.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:21.420Z,1516696581.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:21.845Z,1516696581.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:22.219Z,1516696582.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:22.620Z,1516696582.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:23.027Z,1516696583.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:23.422Z,1516696583.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:23.833Z,1516696583.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:24.225Z,1516696584.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:24.618Z,1516696584.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:25.021Z,1516696585.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:25.422Z,1516696585.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:25.818Z,1516696585.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:26.228Z,1516696586.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:26.622Z,1516696586.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:27.023Z,1516696587.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:27.420Z,1516696587.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:27.811Z,1516696587.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:28.210Z,1516696588.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:28.621Z,1516696588.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:29.016Z,1516696589.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:29.423Z,1516696589.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:29.825Z,1516696589.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:30.241Z,1516696590.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:30.629Z,1516696590.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:31.023Z,1516696591.023 [PNI_TCM](ERROR): CRC does not match. Expected:0x43880 got:0x61458 2018-01-23T08:36:31.041Z,1516696591.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:31.417Z,1516696591.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:31.829Z,1516696591.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:32.224Z,1516696592.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:32.625Z,1516696592.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:33.037Z,1516696593.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:33.435Z,1516696593.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:33.831Z,1516696593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:34.221Z,1516696594.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:34.624Z,1516696594.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:35.029Z,1516696595.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:35.437Z,1516696595.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:35.840Z,1516696595.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:36.236Z,1516696596.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:36.633Z,1516696596.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:37.024Z,1516696597.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:37.422Z,1516696597.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:37.827Z,1516696597.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:38.241Z,1516696598.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:38.632Z,1516696598.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x50175 got:0x3355 2018-01-23T08:36:38.657Z,1516696598.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:39.038Z,1516696599.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:39.439Z,1516696599.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:39.848Z,1516696599.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:40.244Z,1516696600.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:40.640Z,1516696600.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:41.012Z,1516696601.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:41.441Z,1516696601.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:41.837Z,1516696601.837 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T08:36:41.864Z,1516696601.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:42.237Z,1516696602.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:42.619Z,1516696602.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:43.026Z,1516696603.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:43.427Z,1516696603.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:43.819Z,1516696603.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:44.224Z,1516696604.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:44.647Z,1516696604.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:45.024Z,1516696605.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:45.420Z,1516696605.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:45.819Z,1516696605.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:46.249Z,1516696606.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:46.617Z,1516696606.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:47.019Z,1516696607.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:47.424Z,1516696607.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:47.847Z,1516696607.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:48.227Z,1516696608.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:48.618Z,1516696608.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:49.030Z,1516696609.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:49.424Z,1516696609.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:49.825Z,1516696609.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:50.241Z,1516696610.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:50.633Z,1516696610.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:51.037Z,1516696611.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:51.434Z,1516696611.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:51.835Z,1516696611.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:52.231Z,1516696612.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:52.651Z,1516696612.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:53.029Z,1516696613.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:53.434Z,1516696613.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:53.808Z,1516696613.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:54.234Z,1516696614.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:54.655Z,1516696614.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:55.044Z,1516696615.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:55.436Z,1516696615.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:55.825Z,1516696615.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:56.225Z,1516696616.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:56.633Z,1516696616.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:57.024Z,1516696617.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:57.451Z,1516696617.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:57.833Z,1516696617.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:58.228Z,1516696618.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:58.631Z,1516696618.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:59.030Z,1516696619.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:59.429Z,1516696619.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:36:59.824Z,1516696619.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:00.246Z,1516696620.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:00.635Z,1516696620.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:01.037Z,1516696621.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:01.434Z,1516696621.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:01.808Z,1516696621.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:02.235Z,1516696622.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:02.639Z,1516696622.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:03.047Z,1516696623.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:03.417Z,1516696623.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:03.814Z,1516696623.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:04.221Z,1516696624.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:04.622Z,1516696624.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:05.025Z,1516696625.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:05.416Z,1516696625.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:05.816Z,1516696625.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:06.221Z,1516696626.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:06.621Z,1516696626.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:07.021Z,1516696627.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:07.429Z,1516696627.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:07.815Z,1516696627.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:08.232Z,1516696628.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:08.630Z,1516696628.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:09.026Z,1516696629.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:09.419Z,1516696629.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:09.828Z,1516696629.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:10.226Z,1516696630.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:10.630Z,1516696630.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:11.026Z,1516696631.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:11.420Z,1516696631.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:11.827Z,1516696631.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:12.226Z,1516696632.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:12.637Z,1516696632.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:13.030Z,1516696633.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:13.030Z,1516696633.030 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107 2018-01-23T08:37:13.031Z,1516696633.031 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:37:13.032Z,1516696633.032 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:13.033Z,1516696633.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107 2018-01-23T08:37:13.033Z,1516696633.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:37:13.034Z,1516696633.034 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:13.034Z,1516696633.034 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107 2018-01-23T08:37:13.034Z,1516696633.034 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:37:13.036Z,1516696633.036 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:37:13.036Z,1516696633.036 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:37:13.037Z,1516696633.037 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:37:13.037Z,1516696633.037 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:37:13.064Z,1516696633.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:37:13.064Z,1516696633.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:37:13.065Z,1516696633.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:37:13.424Z,1516696633.424 [Default:CheckIn:D] Stopped 2018-01-23T08:37:13.424Z,1516696633.424 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:37:13.435Z,1516696633.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:37:13.435Z,1516696633.435 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107 2018-01-23T08:37:13.435Z,1516696633.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:37:13.435Z,1516696633.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107 2018-01-23T08:37:13.436Z,1516696633.436 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:37:13.436Z,1516696633.436 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107 2018-01-23T08:37:13.826Z,1516696633.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:37:13.827Z,1516696633.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:37:13.827Z,1516696633.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:37:13.828Z,1516696633.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:37:13.828Z,1516696633.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:37:13.828Z,1516696633.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:37:13.829Z,1516696633.829 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:37:13.829Z,1516696633.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:37:13.829Z,1516696633.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:37:13.831Z,1516696633.831 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 319.356087 min 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn:E] Stopped 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn] Stopped 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn](INFO): Running loop #32 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn] Running Loop=32 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:37:13.832Z,1516696633.832 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:37:14.244Z,1516696634.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:37:14.245Z,1516696634.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:17.326Z,1516696637.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s. 2018-01-23T08:37:17.327Z,1516696637.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:17.480Z,1516696637.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:37:17.481Z,1516696637.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:17.799Z,1516696637.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:37:17.800Z,1516696637.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:18.200Z,1516696638.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:37:18.201Z,1516696638.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:18.600Z,1516696638.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:37:18.601Z,1516696638.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:19.000Z,1516696639.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:37:19.001Z,1516696639.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:19.401Z,1516696639.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:37:19.402Z,1516696639.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:19.801Z,1516696639.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:37:19.802Z,1516696639.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:20.202Z,1516696640.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:37:20.203Z,1516696640.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:20.599Z,1516696640.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:37:20.600Z,1516696640.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:20.999Z,1516696640.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:37:21.000Z,1516696641.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:21.399Z,1516696641.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:37:21.400Z,1516696641.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:21.799Z,1516696641.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:37:21.800Z,1516696641.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:22.191Z,1516696642.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:37:22.192Z,1516696642.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:22.602Z,1516696642.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:37:22.603Z,1516696642.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:23.005Z,1516696643.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:37:23.006Z,1516696643.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:23.401Z,1516696643.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:37:23.402Z,1516696643.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:23.799Z,1516696643.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:37:23.800Z,1516696643.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:24.200Z,1516696644.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:37:24.201Z,1516696644.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:24.604Z,1516696644.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:37:24.605Z,1516696644.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:24.999Z,1516696644.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:37:25.000Z,1516696645.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:25.401Z,1516696645.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:37:25.402Z,1516696645.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:25.801Z,1516696645.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:37:25.803Z,1516696645.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:26.202Z,1516696646.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:37:26.203Z,1516696646.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:26.600Z,1516696646.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:37:26.601Z,1516696646.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:26.995Z,1516696646.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:37:26.996Z,1516696646.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:27.403Z,1516696647.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:37:27.404Z,1516696647.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:27.801Z,1516696647.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:37:27.802Z,1516696647.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:28.197Z,1516696648.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:37:28.198Z,1516696648.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:28.616Z,1516696648.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:37:28.617Z,1516696648.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:29.013Z,1516696649.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:37:29.014Z,1516696649.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:29.404Z,1516696649.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:37:29.405Z,1516696649.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:29.800Z,1516696649.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:37:29.801Z,1516696649.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:30.204Z,1516696650.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:37:30.205Z,1516696650.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:30.601Z,1516696650.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:37:30.602Z,1516696650.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:31.000Z,1516696651.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:37:31.001Z,1516696651.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:31.411Z,1516696651.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:37:31.412Z,1516696651.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:31.816Z,1516696651.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:37:31.817Z,1516696651.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:32.207Z,1516696652.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:37:32.208Z,1516696652.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:32.601Z,1516696652.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:37:32.602Z,1516696652.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:33.004Z,1516696653.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:37:33.005Z,1516696653.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:33.401Z,1516696653.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:33.802Z,1516696653.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:34.205Z,1516696654.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:34.607Z,1516696654.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:35.016Z,1516696655.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:35.406Z,1516696655.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:35.802Z,1516696655.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:36.201Z,1516696656.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:36.605Z,1516696656.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:37.004Z,1516696657.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:37.416Z,1516696657.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:37.810Z,1516696657.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:38.220Z,1516696658.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:38.604Z,1516696658.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:39.006Z,1516696659.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:39.403Z,1516696659.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:39.805Z,1516696659.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:40.181Z,1516696660.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:40.617Z,1516696660.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:41.016Z,1516696661.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:41.410Z,1516696661.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:41.807Z,1516696661.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:42.210Z,1516696662.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:42.604Z,1516696662.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:42.987Z,1516696662.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:43.415Z,1516696663.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:43.813Z,1516696663.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:44.213Z,1516696664.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:44.618Z,1516696664.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:45.013Z,1516696665.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:45.413Z,1516696665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:45.815Z,1516696665.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:46.185Z,1516696666.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:46.610Z,1516696666.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:47.015Z,1516696667.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:47.414Z,1516696667.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:47.813Z,1516696667.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:48.191Z,1516696668.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:48.592Z,1516696668.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:48.993Z,1516696668.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:49.417Z,1516696669.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:49.813Z,1516696669.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:50.215Z,1516696670.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:50.592Z,1516696670.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:50.993Z,1516696670.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:51.388Z,1516696671.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:51.795Z,1516696671.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:52.190Z,1516696672.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:52.618Z,1516696672.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:53.023Z,1516696673.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:53.401Z,1516696673.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:53.793Z,1516696673.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:54.192Z,1516696674.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:54.593Z,1516696674.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:54.993Z,1516696674.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:55.398Z,1516696675.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:55.806Z,1516696675.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:56.198Z,1516696676.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:56.596Z,1516696676.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:56.997Z,1516696676.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:57.397Z,1516696677.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:57.797Z,1516696677.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:58.203Z,1516696678.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:58.610Z,1516696678.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:59.008Z,1516696679.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:59.402Z,1516696679.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:37:59.800Z,1516696679.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:00.205Z,1516696680.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:00.601Z,1516696680.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:00.999Z,1516696680.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:01.402Z,1516696681.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:01.802Z,1516696681.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:02.202Z,1516696682.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:02.601Z,1516696682.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:02.000Z,1516696683.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:03.400Z,1516696683.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:03.801Z,1516696683.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:04.191Z,1516696684.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:04.602Z,1516696684.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:05.014Z,1516696685.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:05.402Z,1516696685.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:05.800Z,1516696685.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:06.201Z,1516696686.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:06.601Z,1516696686.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:07.000Z,1516696687.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:07.417Z,1516696687.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:07.813Z,1516696687.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:08.210Z,1516696688.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:08.602Z,1516696688.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:09.001Z,1516696689.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:09.401Z,1516696689.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:09.803Z,1516696689.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:10.201Z,1516696690.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:10.610Z,1516696690.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:11.015Z,1516696691.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:11.412Z,1516696691.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:11.803Z,1516696691.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:12.205Z,1516696692.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:12.603Z,1516696692.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:13.005Z,1516696693.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:13.417Z,1516696693.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:13.816Z,1516696693.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:14.212Z,1516696694.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:14.606Z,1516696694.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:17.703Z,1516696697.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:17.853Z,1516696697.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:18.172Z,1516696698.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:18.582Z,1516696698.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:18.999Z,1516696698.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:19.372Z,1516696699.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:19.769Z,1516696699.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:20.167Z,1516696700.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:20.577Z,1516696700.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:20.974Z,1516696700.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:21.373Z,1516696701.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:21.768Z,1516696701.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:22.168Z,1516696702.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:22.570Z,1516696702.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:22.968Z,1516696702.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:23.380Z,1516696703.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:23.785Z,1516696703.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:24.175Z,1516696704.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:24.568Z,1516696704.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:24.968Z,1516696704.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:25.370Z,1516696705.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:25.769Z,1516696705.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:26.167Z,1516696706.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:26.577Z,1516696706.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:26.974Z,1516696706.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:27.375Z,1516696707.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:27.769Z,1516696707.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:28.168Z,1516696708.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:28.570Z,1516696708.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:28.968Z,1516696708.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:29.380Z,1516696709.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:29.773Z,1516696709.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:30.175Z,1516696710.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:30.568Z,1516696710.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:30.968Z,1516696710.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:31.373Z,1516696711.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:31.774Z,1516696711.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:32.173Z,1516696712.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:32.577Z,1516696712.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:32.968Z,1516696712.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:33.373Z,1516696713.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:33.775Z,1516696713.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:34.180Z,1516696714.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:34.571Z,1516696714.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:34.969Z,1516696714.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:35.379Z,1516696715.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:35.785Z,1516696715.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:36.177Z,1516696716.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:36.578Z,1516696716.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:36.973Z,1516696716.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:37.382Z,1516696717.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:37.782Z,1516696717.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:38.185Z,1516696718.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:38.573Z,1516696718.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:38.970Z,1516696718.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:39.385Z,1516696719.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:39.781Z,1516696719.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:40.185Z,1516696720.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:40.573Z,1516696720.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:40.969Z,1516696720.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:41.380Z,1516696721.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:41.787Z,1516696721.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:42.179Z,1516696722.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:42.573Z,1516696722.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:42.977Z,1516696722.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:43.389Z,1516696723.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:43.789Z,1516696723.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:44.180Z,1516696724.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:44.584Z,1516696724.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:44.985Z,1516696724.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:45.380Z,1516696725.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:45.789Z,1516696725.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:46.189Z,1516696726.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:46.574Z,1516696726.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:46.980Z,1516696726.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:47.394Z,1516696727.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:47.789Z,1516696727.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:48.182Z,1516696728.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:48.577Z,1516696728.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:48.981Z,1516696728.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:49.393Z,1516696729.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:49.789Z,1516696729.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:50.197Z,1516696730.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:50.569Z,1516696730.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:50.965Z,1516696730.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:51.375Z,1516696731.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:51.777Z,1516696731.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:52.176Z,1516696732.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:52.573Z,1516696732.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:52.973Z,1516696732.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:53.375Z,1516696733.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:53.777Z,1516696733.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:54.174Z,1516696734.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:54.570Z,1516696734.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:54.968Z,1516696734.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:55.378Z,1516696735.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:55.774Z,1516696735.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:56.177Z,1516696736.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:56.570Z,1516696736.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:56.968Z,1516696736.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:57.386Z,1516696737.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:57.774Z,1516696737.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:58.173Z,1516696738.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:58.570Z,1516696738.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:58.967Z,1516696738.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:59.377Z,1516696739.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:38:59.775Z,1516696739.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:00.177Z,1516696740.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:00.569Z,1516696740.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:00.972Z,1516696740.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:01.374Z,1516696741.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:01.774Z,1516696741.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:02.177Z,1516696742.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:02.576Z,1516696742.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:02.969Z,1516696742.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:03.378Z,1516696743.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:03.777Z,1516696743.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:04.177Z,1516696744.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:04.570Z,1516696744.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:04.975Z,1516696744.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:05.380Z,1516696745.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:05.789Z,1516696745.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:06.189Z,1516696746.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:06.577Z,1516696746.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:06.973Z,1516696746.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:07.372Z,1516696747.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:07.779Z,1516696747.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:08.189Z,1516696748.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:08.578Z,1516696748.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:08.980Z,1516696748.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:09.377Z,1516696749.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:09.770Z,1516696749.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:10.179Z,1516696750.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:10.579Z,1516696750.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:10.987Z,1516696750.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:11.410Z,1516696751.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:11.774Z,1516696751.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:12.176Z,1516696752.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:12.577Z,1516696752.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:12.974Z,1516696752.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:13.385Z,1516696753.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:13.783Z,1516696753.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:14.188Z,1516696754.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:14.576Z,1516696754.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:14.973Z,1516696754.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:18.090Z,1516696758.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:18.253Z,1516696758.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:18.590Z,1516696758.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:18.992Z,1516696758.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:19.377Z,1516696759.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:19.783Z,1516696759.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:20.182Z,1516696760.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:20.593Z,1516696760.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:20.997Z,1516696760.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:21.386Z,1516696761.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:21.785Z,1516696761.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:22.167Z,1516696762.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:22.589Z,1516696762.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:22.973Z,1516696762.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:23.375Z,1516696763.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:23.800Z,1516696763.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:24.205Z,1516696764.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:24.596Z,1516696764.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:24.973Z,1516696764.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:25.378Z,1516696765.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:25.773Z,1516696765.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:26.170Z,1516696766.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:26.585Z,1516696766.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:26.982Z,1516696766.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:27.407Z,1516696767.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:27.781Z,1516696767.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:28.174Z,1516696768.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:28.574Z,1516696768.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:28.982Z,1516696768.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:29.374Z,1516696769.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:29.790Z,1516696769.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:30.182Z,1516696770.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:30.583Z,1516696770.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:30.981Z,1516696770.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:31.373Z,1516696771.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:31.780Z,1516696771.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:32.176Z,1516696772.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:32.583Z,1516696772.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:32.986Z,1516696772.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:33.384Z,1516696773.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:33.774Z,1516696773.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:34.177Z,1516696774.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:34.573Z,1516696774.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:34.983Z,1516696774.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:35.371Z,1516696775.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:35.783Z,1516696775.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:36.185Z,1516696776.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:36.582Z,1516696776.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:36.974Z,1516696776.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:37.377Z,1516696777.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:37.776Z,1516696777.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:38.177Z,1516696778.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:38.586Z,1516696778.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:38.986Z,1516696778.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:39.383Z,1516696779.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:39.772Z,1516696779.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:40.180Z,1516696780.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:40.581Z,1516696780.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:40.980Z,1516696780.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:41.382Z,1516696781.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:41.784Z,1516696781.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:42.193Z,1516696782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:42.593Z,1516696782.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:42.978Z,1516696782.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:43.372Z,1516696783.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:43.780Z,1516696783.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:44.181Z,1516696784.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:44.593Z,1516696784.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:44.986Z,1516696784.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:45.384Z,1516696785.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:45.773Z,1516696785.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:46.182Z,1516696786.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:46.585Z,1516696786.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:46.974Z,1516696786.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:47.382Z,1516696787.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:47.788Z,1516696787.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:48.190Z,1516696788.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:48.586Z,1516696788.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:48.984Z,1516696788.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:49.387Z,1516696789.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:49.764Z,1516696789.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:50.161Z,1516696790.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:50.605Z,1516696790.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:50.989Z,1516696790.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:51.382Z,1516696791.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:51.797Z,1516696791.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:52.167Z,1516696792.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:52.568Z,1516696792.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:52.977Z,1516696792.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:53.370Z,1516696793.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:53.802Z,1516696793.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:54.185Z,1516696794.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:54.578Z,1516696794.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:54.973Z,1516696794.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:55.377Z,1516696795.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:55.776Z,1516696795.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:56.170Z,1516696796.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:56.590Z,1516696796.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:56.989Z,1516696796.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:57.388Z,1516696797.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:57.762Z,1516696797.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:58.163Z,1516696798.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:58.564Z,1516696798.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:58.991Z,1516696798.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:59.368Z,1516696799.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:39:59.789Z,1516696799.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:00.193Z,1516696800.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:00.588Z,1516696800.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:00.964Z,1516696800.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:01.373Z,1516696801.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:01.773Z,1516696801.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:02.170Z,1516696802.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:02.596Z,1516696802.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:02.994Z,1516696802.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:03.377Z,1516696803.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:03.776Z,1516696803.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:04.176Z,1516696804.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:04.572Z,1516696804.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:04.988Z,1516696804.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:05.377Z,1516696805.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:05.783Z,1516696805.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:06.185Z,1516696806.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:06.582Z,1516696806.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:06.981Z,1516696806.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:07.377Z,1516696807.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:07.774Z,1516696807.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:08.178Z,1516696808.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:08.589Z,1516696808.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:08.989Z,1516696808.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:09.386Z,1516696809.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:09.782Z,1516696809.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:10.178Z,1516696810.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:10.584Z,1516696810.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:10.982Z,1516696810.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:11.391Z,1516696811.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:11.790Z,1516696811.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:12.188Z,1516696812.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:12.587Z,1516696812.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:12.981Z,1516696812.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:13.384Z,1516696813.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:13.777Z,1516696813.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:14.178Z,1516696814.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:14.178Z,1516696814.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108 2018-01-23T08:40:14.178Z,1516696814.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:40:14.184Z,1516696814.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:14.184Z,1516696814.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108 2018-01-23T08:40:14.184Z,1516696814.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:40:14.186Z,1516696814.186 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:14.186Z,1516696814.186 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108 2018-01-23T08:40:14.186Z,1516696814.186 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:40:14.216Z,1516696814.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:40:14.216Z,1516696814.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:40:14.217Z,1516696814.217 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:40:14.608Z,1516696814.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:40:14.608Z,1516696814.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108 2018-01-23T08:40:14.608Z,1516696814.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:40:14.608Z,1516696814.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108 2018-01-23T08:40:14.609Z,1516696814.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:40:14.609Z,1516696814.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108 2018-01-23T08:40:14.998Z,1516696814.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:40:14.999Z,1516696814.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:40:14.999Z,1516696814.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:40:14.999Z,1516696814.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:40:14.000Z,1516696815.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:40:14.000Z,1516696815.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:40:15.000Z,1516696815.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:40:15.001Z,1516696815.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:40:15.001Z,1516696815.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:40:18.099Z,1516696818.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T08:40:18.100Z,1516696818.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:18.236Z,1516696818.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T08:40:18.237Z,1516696818.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:18.569Z,1516696818.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:40:18.570Z,1516696818.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:18.971Z,1516696818.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:40:18.972Z,1516696818.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:19.391Z,1516696819.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:40:19.392Z,1516696819.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:19.776Z,1516696819.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:40:19.777Z,1516696819.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:20.181Z,1516696820.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:40:20.182Z,1516696820.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:20.580Z,1516696820.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:40:20.581Z,1516696820.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:20.996Z,1516696820.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:40:20.997Z,1516696820.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:21.371Z,1516696821.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:40:21.372Z,1516696821.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:21.772Z,1516696821.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:40:21.773Z,1516696821.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:22.180Z,1516696822.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:40:22.181Z,1516696822.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:22.594Z,1516696822.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:40:22.595Z,1516696822.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:22.000Z,1516696823.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:40:23.001Z,1516696823.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:23.380Z,1516696823.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:40:23.381Z,1516696823.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:23.776Z,1516696823.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:40:23.777Z,1516696823.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:24.184Z,1516696824.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:40:24.185Z,1516696824.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:24.573Z,1516696824.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:40:24.574Z,1516696824.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:24.979Z,1516696824.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:40:24.980Z,1516696824.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:25.372Z,1516696825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:40:25.373Z,1516696825.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:25.796Z,1516696825.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:40:25.797Z,1516696825.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:26.173Z,1516696826.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T08:40:26.202Z,1516696826.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:40:26.203Z,1516696826.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:26.584Z,1516696826.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:40:26.585Z,1516696826.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:26.975Z,1516696826.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:40:26.976Z,1516696826.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:27.386Z,1516696827.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:40:27.402Z,1516696827.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:27.777Z,1516696827.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:40:27.777Z,1516696827.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:28.172Z,1516696828.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:40:28.173Z,1516696828.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:28.605Z,1516696828.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:40:28.606Z,1516696828.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:29.001Z,1516696829.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:40:29.002Z,1516696829.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:29.381Z,1516696829.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:40:29.383Z,1516696829.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:29.776Z,1516696829.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:40:29.777Z,1516696829.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:30.171Z,1516696830.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:40:30.172Z,1516696830.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:30.596Z,1516696830.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:40:30.597Z,1516696830.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:30.970Z,1516696830.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:40:30.972Z,1516696830.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:31.371Z,1516696831.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:40:31.372Z,1516696831.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:31.787Z,1516696831.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:40:31.788Z,1516696831.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:32.194Z,1516696832.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:40:32.207Z,1516696832.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:32.582Z,1516696832.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:40:32.583Z,1516696832.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:32.973Z,1516696832.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:40:32.974Z,1516696832.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:33.381Z,1516696833.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:40:33.382Z,1516696833.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:33.770Z,1516696833.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:40:33.771Z,1516696833.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:34.181Z,1516696834.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:34.583Z,1516696834.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:34.983Z,1516696834.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:35.406Z,1516696835.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:35.769Z,1516696835.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:36.174Z,1516696836.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:36.581Z,1516696836.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:36.980Z,1516696836.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:37.378Z,1516696837.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:37.786Z,1516696837.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:38.186Z,1516696838.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:38.595Z,1516696838.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:38.973Z,1516696838.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:39.381Z,1516696839.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:39.780Z,1516696839.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:40.180Z,1516696840.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:40.592Z,1516696840.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:40.997Z,1516696840.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:41.393Z,1516696841.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:41.785Z,1516696841.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:42.181Z,1516696842.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:42.565Z,1516696842.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:42.999Z,1516696842.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:43.369Z,1516696843.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:43.799Z,1516696843.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:44.199Z,1516696844.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:44.599Z,1516696844.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:44.990Z,1516696844.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:45.369Z,1516696845.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:45.773Z,1516696845.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:46.170Z,1516696846.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:46.579Z,1516696846.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:46.983Z,1516696846.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:47.384Z,1516696847.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:47.771Z,1516696847.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:48.173Z,1516696848.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:48.583Z,1516696848.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:48.983Z,1516696848.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:49.394Z,1516696849.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:49.778Z,1516696849.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:50.178Z,1516696850.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:50.585Z,1516696850.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:50.987Z,1516696850.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:51.385Z,1516696851.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:51.777Z,1516696851.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:52.184Z,1516696852.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:52.583Z,1516696852.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:52.984Z,1516696852.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:53.379Z,1516696853.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:53.780Z,1516696853.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:54.169Z,1516696854.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:54.579Z,1516696854.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:54.983Z,1516696854.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:55.381Z,1516696855.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:55.779Z,1516696855.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:56.181Z,1516696856.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:56.581Z,1516696856.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:56.993Z,1516696856.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:57.383Z,1516696857.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:57.773Z,1516696857.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:58.185Z,1516696858.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:58.589Z,1516696858.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:58.994Z,1516696858.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:59.387Z,1516696859.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:40:59.768Z,1516696859.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:00.166Z,1516696860.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:00.590Z,1516696860.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:00.990Z,1516696860.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:01.396Z,1516696861.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:01.777Z,1516696861.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:02.168Z,1516696862.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:02.571Z,1516696862.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:02.995Z,1516696862.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:03.374Z,1516696863.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:03.773Z,1516696863.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:04.169Z,1516696864.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:04.581Z,1516696864.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:04.982Z,1516696864.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:05.375Z,1516696865.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:05.772Z,1516696865.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:06.165Z,1516696866.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:06.575Z,1516696866.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:06.978Z,1516696866.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:07.375Z,1516696867.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:07.776Z,1516696867.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:08.172Z,1516696868.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:08.589Z,1516696868.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:08.989Z,1516696868.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:09.379Z,1516696869.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:09.777Z,1516696869.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:10.177Z,1516696870.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:10.582Z,1516696870.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:10.989Z,1516696870.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:11.381Z,1516696871.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:11.788Z,1516696871.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:12.157Z,1516696872.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:12.590Z,1516696872.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:13.001Z,1516696873.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:13.384Z,1516696873.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:13.787Z,1516696873.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:14.190Z,1516696874.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:14.585Z,1516696874.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:14.994Z,1516696874.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:18.087Z,1516696878.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:18.243Z,1516696878.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:18.560Z,1516696878.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:18.965Z,1516696878.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:19.354Z,1516696879.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:19.772Z,1516696879.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:20.167Z,1516696880.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:20.564Z,1516696880.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:20.955Z,1516696880.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:21.363Z,1516696881.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:21.761Z,1516696881.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:22.154Z,1516696882.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:22.565Z,1516696882.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:22.973Z,1516696882.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:23.371Z,1516696883.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:23.768Z,1516696883.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:24.161Z,1516696884.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:24.569Z,1516696884.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:24.961Z,1516696884.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:25.365Z,1516696885.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:25.778Z,1516696885.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:26.179Z,1516696886.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:26.569Z,1516696886.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:26.965Z,1516696886.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:27.345Z,1516696887.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:27.751Z,1516696887.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:28.158Z,1516696888.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:28.552Z,1516696888.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:28.961Z,1516696888.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:29.362Z,1516696889.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:29.766Z,1516696889.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:30.156Z,1516696890.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:30.551Z,1516696890.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:30.953Z,1516696890.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:31.352Z,1516696891.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:31.761Z,1516696891.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:32.157Z,1516696892.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:32.557Z,1516696892.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:32.951Z,1516696892.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:33.352Z,1516696893.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:33.752Z,1516696893.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:34.160Z,1516696894.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:34.551Z,1516696894.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:34.969Z,1516696894.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:35.362Z,1516696895.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:35.768Z,1516696895.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:36.154Z,1516696896.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:36.553Z,1516696896.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:36.953Z,1516696896.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:37.356Z,1516696897.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:37.762Z,1516696897.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:38.165Z,1516696898.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:38.562Z,1516696898.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:38.953Z,1516696898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:39.353Z,1516696899.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:39.761Z,1516696899.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:40.152Z,1516696900.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:40.553Z,1516696900.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:40.965Z,1516696900.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:41.369Z,1516696901.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:41.762Z,1516696901.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:42.153Z,1516696902.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:42.554Z,1516696902.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:42.953Z,1516696902.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:43.355Z,1516696903.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:43.762Z,1516696903.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:44.172Z,1516696904.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:44.565Z,1516696904.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:44.954Z,1516696904.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:45.352Z,1516696905.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:45.756Z,1516696905.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:46.162Z,1516696906.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:46.551Z,1516696906.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:46.962Z,1516696906.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:47.366Z,1516696907.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:47.762Z,1516696907.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:48.155Z,1516696908.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:48.562Z,1516696908.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:48.953Z,1516696908.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:49.353Z,1516696909.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:49.761Z,1516696909.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:50.165Z,1516696910.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:50.562Z,1516696910.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:50.956Z,1516696910.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:51.352Z,1516696911.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:51.754Z,1516696911.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:52.154Z,1516696912.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:52.553Z,1516696912.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:52.965Z,1516696912.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:53.365Z,1516696913.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:53.762Z,1516696913.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:54.153Z,1516696914.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:54.554Z,1516696914.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:54.953Z,1516696914.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:55.361Z,1516696915.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:55.762Z,1516696915.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:56.165Z,1516696916.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:56.566Z,1516696916.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:56.965Z,1516696916.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:57.357Z,1516696917.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:57.762Z,1516696917.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:58.155Z,1516696918.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:58.553Z,1516696918.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:58.966Z,1516696918.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:59.365Z,1516696919.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:41:59.764Z,1516696919.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:00.155Z,1516696920.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:00.563Z,1516696920.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:00.955Z,1516696920.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:01.355Z,1516696921.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:01.763Z,1516696921.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:02.172Z,1516696922.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:02.570Z,1516696922.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:02.965Z,1516696922.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:03.357Z,1516696923.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:03.765Z,1516696923.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:04.156Z,1516696924.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:04.563Z,1516696924.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:04.964Z,1516696924.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:05.368Z,1516696925.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:05.773Z,1516696925.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:06.161Z,1516696926.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:06.554Z,1516696926.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:06.965Z,1516696926.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:07.355Z,1516696927.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:07.773Z,1516696927.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:08.171Z,1516696928.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:08.561Z,1516696928.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:08.960Z,1516696928.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:09.360Z,1516696929.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:09.765Z,1516696929.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:10.160Z,1516696930.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:10.563Z,1516696930.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:10.963Z,1516696930.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:11.375Z,1516696931.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:11.767Z,1516696931.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:12.149Z,1516696932.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:12.564Z,1516696932.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:12.965Z,1516696932.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:13.341Z,1516696933.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:13.765Z,1516696933.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:14.169Z,1516696934.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:14.172Z,1516696934.172 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:37:13.8Z 2018-01-23T08:42:14.173Z,1516696934.173 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:42:14.173Z,1516696934.173 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:42:14.573Z,1516696934.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:15.081Z,1516696935.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:15.365Z,1516696935.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:18.480Z,1516696938.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:18.556Z,1516696938.556 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0128.lzma 2018-01-23T08:42:18.620Z,1516696938.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:18.977Z,1516696938.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:19.309Z,1516696939.309 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0128.lzma.bak 2018-01-23T08:42:19.309Z,1516696939.309 [DataOverHttps](INFO): SBD MOMSN=7755293 2018-01-23T08:42:19.384Z,1516696939.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:19.994Z,1516696939.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:20.176Z,1516696940.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:23.291Z,1516696943.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:23.428Z,1516696943.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:23.787Z,1516696943.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:24.188Z,1516696944.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:24.587Z,1516696944.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:24.981Z,1516696944.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:28.074Z,1516696948.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:28.172Z,1516696948.172 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0129.lzma 2018-01-23T08:42:28.225Z,1516696948.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:28.546Z,1516696948.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:28.902Z,1516696948.902 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0129.lzma.bak 2018-01-23T08:42:28.902Z,1516696948.902 [DataOverHttps](INFO): SBD MOMSN=7755295 2018-01-23T08:42:28.972Z,1516696948.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:29.597Z,1516696949.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:29.600Z,1516696949.600 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:42:29.600Z,1516696949.600 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:42:29.601Z,1516696949.601 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:42:29.771Z,1516696949.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:32.833Z,1516696952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:32.977Z,1516696952.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:33.333Z,1516696953.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:33.714Z,1516696953.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:34.106Z,1516696954.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:34.502Z,1516696954.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:34.904Z,1516696954.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:35.300Z,1516696955.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:35.710Z,1516696955.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:36.106Z,1516696956.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:36.506Z,1516696956.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:36.902Z,1516696956.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:37.301Z,1516696957.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:37.709Z,1516696957.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:38.107Z,1516696958.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:38.506Z,1516696958.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:38.908Z,1516696958.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:39.305Z,1516696959.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:39.713Z,1516696959.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:40.117Z,1516696960.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:40.509Z,1516696960.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:40.900Z,1516696960.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:41.298Z,1516696961.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:41.709Z,1516696961.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:42.105Z,1516696962.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:42.502Z,1516696962.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:42.900Z,1516696962.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:43.355Z,1516696963.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:43.706Z,1516696963.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:44.106Z,1516696964.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:44.505Z,1516696964.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:44.893Z,1516696964.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:45.292Z,1516696965.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:45.692Z,1516696965.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:46.102Z,1516696966.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:46.506Z,1516696966.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:46.905Z,1516696966.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:47.300Z,1516696967.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:47.709Z,1516696967.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:48.100Z,1516696968.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:48.498Z,1516696968.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:48.910Z,1516696968.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:49.309Z,1516696969.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:49.709Z,1516696969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:50.098Z,1516696970.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:50.499Z,1516696970.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:50.899Z,1516696970.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:51.302Z,1516696971.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:51.709Z,1516696971.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:52.109Z,1516696972.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:52.521Z,1516696972.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:52.916Z,1516696972.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:53.297Z,1516696973.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:53.711Z,1516696973.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:54.112Z,1516696974.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:54.489Z,1516696974.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:54.913Z,1516696974.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:55.325Z,1516696975.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:55.721Z,1516696975.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:56.113Z,1516696976.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:56.495Z,1516696976.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:56.889Z,1516696976.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:57.316Z,1516696977.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:57.699Z,1516696977.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:58.122Z,1516696978.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:58.526Z,1516696978.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:58.931Z,1516696978.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:59.297Z,1516696979.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:42:59.698Z,1516696979.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:00.107Z,1516696980.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:00.497Z,1516696980.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:00.906Z,1516696980.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:01.331Z,1516696981.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:01.730Z,1516696981.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:02.108Z,1516696982.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:02.500Z,1516696982.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:02.896Z,1516696982.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:03.300Z,1516696983.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:03.705Z,1516696983.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:04.102Z,1516696984.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:04.506Z,1516696984.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:04.908Z,1516696984.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:05.296Z,1516696985.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:05.697Z,1516696985.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:06.100Z,1516696986.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:06.499Z,1516696986.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:06.909Z,1516696986.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:07.304Z,1516696987.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:07.706Z,1516696987.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:08.099Z,1516696988.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:08.500Z,1516696988.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:08.900Z,1516696988.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:09.308Z,1516696989.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:09.700Z,1516696989.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:10.119Z,1516696990.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:10.514Z,1516696990.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:10.916Z,1516696990.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:11.302Z,1516696991.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:11.703Z,1516696991.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:12.102Z,1516696992.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:12.508Z,1516696992.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:12.917Z,1516696992.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:13.310Z,1516696993.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:13.713Z,1516696993.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:14.103Z,1516696994.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:14.502Z,1516696994.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:14.913Z,1516696994.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:15.306Z,1516696995.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:15.306Z,1516696995.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109 2018-01-23T08:43:15.307Z,1516696995.307 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:43:15.308Z,1516696995.308 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:15.309Z,1516696995.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109 2018-01-23T08:43:15.309Z,1516696995.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:43:15.310Z,1516696995.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:15.310Z,1516696995.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109 2018-01-23T08:43:15.310Z,1516696995.310 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:43:15.323Z,1516696995.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:43:15.323Z,1516696995.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:43:15.323Z,1516696995.323 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:43:15.725Z,1516696995.725 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:43:15.725Z,1516696995.725 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109 2018-01-23T08:43:15.725Z,1516696995.725 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:43:15.725Z,1516696995.725 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109 2018-01-23T08:43:15.726Z,1516696995.726 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:43:15.726Z,1516696995.726 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109 2018-01-23T08:43:16.115Z,1516696996.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:43:16.115Z,1516696996.115 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:43:16.116Z,1516696996.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:43:16.116Z,1516696996.116 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:43:16.116Z,1516696996.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:43:16.117Z,1516696996.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:43:16.117Z,1516696996.117 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:43:16.118Z,1516696996.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:43:16.118Z,1516696996.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:43:16.526Z,1516696996.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:43:16.527Z,1516696996.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:16.914Z,1516696996.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:43:16.915Z,1516696996.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:17.288Z,1516696997.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:43:17.289Z,1516696997.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:17.717Z,1516696997.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:43:17.718Z,1516696997.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:18.091Z,1516696998.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:43:18.092Z,1516696998.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:18.492Z,1516696998.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:43:18.493Z,1516696998.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:18.924Z,1516696998.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:43:18.925Z,1516696998.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:19.327Z,1516696999.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:43:19.328Z,1516696999.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:19.726Z,1516696999.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:43:19.731Z,1516696999.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:20.100Z,1516697000.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:43:20.101Z,1516697000.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:20.499Z,1516697000.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:43:20.500Z,1516697000.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:20.898Z,1516697000.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:43:20.899Z,1516697000.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:21.304Z,1516697001.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:43:21.305Z,1516697001.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:21.739Z,1516697001.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:43:21.740Z,1516697001.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:22.102Z,1516697002.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:43:22.103Z,1516697002.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:22.505Z,1516697002.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:43:22.506Z,1516697002.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:22.908Z,1516697002.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:43:22.909Z,1516697002.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:23.295Z,1516697003.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:43:23.296Z,1516697003.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:23.712Z,1516697003.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:43:23.713Z,1516697003.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:24.100Z,1516697004.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:43:24.101Z,1516697004.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:24.497Z,1516697004.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:43:24.498Z,1516697004.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:24.908Z,1516697004.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:43:24.909Z,1516697004.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:25.317Z,1516697005.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:43:25.318Z,1516697005.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:25.706Z,1516697005.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:43:25.707Z,1516697005.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:26.098Z,1516697006.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:43:26.099Z,1516697006.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:26.499Z,1516697006.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:43:26.500Z,1516697006.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:26.904Z,1516697006.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:43:26.905Z,1516697006.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:27.302Z,1516697007.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:43:27.303Z,1516697007.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:27.699Z,1516697007.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:43:27.700Z,1516697007.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:28.109Z,1516697008.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:43:28.110Z,1516697008.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:28.513Z,1516697008.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:43:28.514Z,1516697008.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:28.920Z,1516697008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:43:28.921Z,1516697008.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:29.298Z,1516697009.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:43:29.299Z,1516697009.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:29.700Z,1516697009.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:43:29.701Z,1516697009.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:30.105Z,1516697010.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:43:30.106Z,1516697010.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:33.195Z,1516697013.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T08:43:33.196Z,1516697013.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:33.282Z,1516697013.282 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:43:33.283Z,1516697013.283 [NAL9602] Data Fault, FailCount= 5 2018-01-23T08:43:33.283Z,1516697013.283 [NAL9602](ERROR): Data Fault 2018-01-23T08:43:33.314Z,1516697013.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:43:33.315Z,1516697013.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:33.329Z,1516697013.329 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:43:33.329Z,1516697013.329 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T08:43:33.641Z,1516697013.641 [NAL9602](INFO): Powering down 2018-01-23T08:43:33.680Z,1516697013.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:43:33.681Z,1516697013.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:33.713Z,1516697013.713 [CBIT](INFO): Critical error at 20180123T084333 2018-01-23T08:43:34.072Z,1516697014.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:43:34.073Z,1516697014.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:34.463Z,1516697014.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:43:34.464Z,1516697014.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:34.884Z,1516697014.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:43:34.885Z,1516697014.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:35.269Z,1516697015.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:43:35.270Z,1516697015.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:35.664Z,1516697015.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:36.069Z,1516697016.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:36.476Z,1516697016.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:36.866Z,1516697016.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:37.267Z,1516697017.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:37.676Z,1516697017.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:38.080Z,1516697018.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:38.470Z,1516697018.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:38.866Z,1516697018.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:39.263Z,1516697019.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:39.701Z,1516697019.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:40.063Z,1516697020.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:40.464Z,1516697020.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:40.867Z,1516697020.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:41.284Z,1516697021.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:41.660Z,1516697021.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:42.076Z,1516697022.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:42.464Z,1516697022.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:42.900Z,1516697022.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:43.264Z,1516697023.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:43.667Z,1516697023.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:44.067Z,1516697024.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:44.498Z,1516697024.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:44.869Z,1516697024.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:45.263Z,1516697025.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:45.669Z,1516697025.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:46.068Z,1516697026.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:46.464Z,1516697026.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:46.877Z,1516697026.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:47.274Z,1516697027.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:47.665Z,1516697027.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:48.072Z,1516697028.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:48.476Z,1516697028.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:48.878Z,1516697028.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:49.281Z,1516697029.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:49.673Z,1516697029.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:50.080Z,1516697030.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:50.470Z,1516697030.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:50.872Z,1516697030.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:51.273Z,1516697031.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:51.670Z,1516697031.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:52.070Z,1516697032.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:52.464Z,1516697032.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:52.872Z,1516697032.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:53.281Z,1516697033.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:53.661Z,1516697033.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:54.054Z,1516697034.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:54.454Z,1516697034.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:54.855Z,1516697034.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:55.265Z,1516697035.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:55.662Z,1516697035.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:56.055Z,1516697036.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:56.466Z,1516697036.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:56.863Z,1516697036.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:57.257Z,1516697037.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:57.668Z,1516697037.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:58.060Z,1516697038.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:58.458Z,1516697038.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:58.868Z,1516697038.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:59.268Z,1516697039.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:43:59.658Z,1516697039.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:00.068Z,1516697040.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:00.460Z,1516697040.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:00.867Z,1516697040.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:01.260Z,1516697041.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:01.661Z,1516697041.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:02.058Z,1516697042.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:02.464Z,1516697042.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:02.863Z,1516697042.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:03.258Z,1516697043.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:03.661Z,1516697043.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:04.061Z,1516697044.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:04.461Z,1516697044.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:04.860Z,1516697044.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:05.268Z,1516697045.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:05.659Z,1516697045.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:06.064Z,1516697046.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:06.468Z,1516697046.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:06.861Z,1516697046.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:07.264Z,1516697047.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:07.661Z,1516697047.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:08.062Z,1516697048.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:08.464Z,1516697048.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:08.864Z,1516697048.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:09.258Z,1516697049.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:09.669Z,1516697049.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:10.063Z,1516697050.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:10.459Z,1516697050.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:10.861Z,1516697050.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:11.263Z,1516697051.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:11.668Z,1516697051.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:12.062Z,1516697052.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:12.463Z,1516697052.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:12.863Z,1516697052.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:13.261Z,1516697053.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:13.671Z,1516697053.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:14.062Z,1516697054.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:14.461Z,1516697054.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:14.866Z,1516697054.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:15.259Z,1516697055.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:15.661Z,1516697055.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:16.064Z,1516697056.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:16.461Z,1516697056.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:16.861Z,1516697056.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:17.265Z,1516697057.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:17.673Z,1516697057.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:18.065Z,1516697058.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:18.466Z,1516697058.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:18.499Z,1516697058.499 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:44:18.862Z,1516697058.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:19.262Z,1516697059.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:19.671Z,1516697059.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:20.062Z,1516697060.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:20.468Z,1516697060.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:20.867Z,1516697060.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:21.262Z,1516697061.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:21.662Z,1516697061.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:22.070Z,1516697062.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:22.472Z,1516697062.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:22.872Z,1516697062.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:23.266Z,1516697063.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:23.663Z,1516697063.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:24.069Z,1516697064.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:24.473Z,1516697064.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:24.865Z,1516697064.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:25.269Z,1516697065.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:25.672Z,1516697065.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:26.073Z,1516697066.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:26.469Z,1516697066.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:26.870Z,1516697066.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:27.266Z,1516697067.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:27.673Z,1516697067.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:28.061Z,1516697068.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:28.471Z,1516697068.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:28.883Z,1516697068.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:29.253Z,1516697069.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:29.684Z,1516697069.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:30.060Z,1516697070.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:30.457Z,1516697070.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:33.583Z,1516697073.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:33.713Z,1516697073.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:34.049Z,1516697074.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:34.453Z,1516697074.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:34.845Z,1516697074.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:35.253Z,1516697075.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:35.650Z,1516697075.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:36.050Z,1516697076.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:36.453Z,1516697076.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:36.848Z,1516697076.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:37.243Z,1516697077.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:37.653Z,1516697077.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:38.053Z,1516697078.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:38.443Z,1516697078.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:38.845Z,1516697078.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:39.245Z,1516697079.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:39.644Z,1516697079.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:40.045Z,1516697080.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:40.449Z,1516697080.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:40.850Z,1516697080.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:41.253Z,1516697081.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:41.650Z,1516697081.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:42.049Z,1516697082.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:42.445Z,1516697082.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:42.844Z,1516697082.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:43.243Z,1516697083.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:43.653Z,1516697083.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:44.044Z,1516697084.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:44.442Z,1516697084.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:44.845Z,1516697084.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:45.253Z,1516697085.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:45.643Z,1516697085.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:46.045Z,1516697086.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:46.445Z,1516697086.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:46.849Z,1516697086.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:47.253Z,1516697087.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:47.650Z,1516697087.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:48.049Z,1516697088.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:48.453Z,1516697088.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:48.849Z,1516697088.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:49.243Z,1516697089.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:49.645Z,1516697089.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:50.057Z,1516697090.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:50.446Z,1516697090.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:50.853Z,1516697090.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:51.250Z,1516697091.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:51.656Z,1516697091.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:52.045Z,1516697092.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:52.451Z,1516697092.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:52.846Z,1516697092.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:53.253Z,1516697093.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:53.651Z,1516697093.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:54.050Z,1516697094.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:54.453Z,1516697094.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:54.851Z,1516697094.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:55.246Z,1516697095.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:55.653Z,1516697095.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:56.051Z,1516697096.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:56.446Z,1516697096.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:56.853Z,1516697096.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:57.251Z,1516697097.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:57.646Z,1516697097.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:58.053Z,1516697098.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:58.458Z,1516697098.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:58.850Z,1516697098.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:59.245Z,1516697099.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:44:59.658Z,1516697099.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:00.046Z,1516697100.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:00.453Z,1516697100.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:00.853Z,1516697100.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:01.247Z,1516697101.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:01.647Z,1516697101.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:02.052Z,1516697102.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:02.447Z,1516697102.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:02.853Z,1516697102.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:03.252Z,1516697103.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:03.655Z,1516697103.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:04.048Z,1516697104.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:04.461Z,1516697104.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:04.852Z,1516697104.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:05.257Z,1516697105.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:05.662Z,1516697105.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:06.047Z,1516697106.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:06.456Z,1516697106.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:06.854Z,1516697106.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:07.248Z,1516697107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:07.649Z,1516697107.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:08.051Z,1516697108.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:08.449Z,1516697108.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:08.853Z,1516697108.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:09.246Z,1516697109.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:09.649Z,1516697109.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:10.056Z,1516697110.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:10.452Z,1516697110.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:10.855Z,1516697110.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:11.259Z,1516697111.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:11.635Z,1516697111.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:12.038Z,1516697112.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:12.444Z,1516697112.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:12.842Z,1516697112.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:13.246Z,1516697113.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:13.641Z,1516697113.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:14.046Z,1516697114.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:14.447Z,1516697114.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:14.844Z,1516697114.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:15.242Z,1516697115.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:15.646Z,1516697115.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:16.052Z,1516697116.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:16.443Z,1516697116.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:16.847Z,1516697116.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:17.244Z,1516697117.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:17.716Z,1516697117.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:18.045Z,1516697118.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:18.448Z,1516697118.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:18.843Z,1516697118.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:19.245Z,1516697119.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:19.644Z,1516697119.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:20.044Z,1516697120.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:20.445Z,1516697120.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:20.844Z,1516697120.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:21.243Z,1516697121.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:21.645Z,1516697121.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:22.044Z,1516697122.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:22.443Z,1516697122.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:22.845Z,1516697122.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:23.244Z,1516697123.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:23.643Z,1516697123.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:24.047Z,1516697124.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:24.448Z,1516697124.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:24.843Z,1516697124.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:25.245Z,1516697125.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:25.644Z,1516697125.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:26.042Z,1516697126.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:26.450Z,1516697126.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:26.842Z,1516697126.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:27.237Z,1516697127.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:27.643Z,1516697127.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:28.042Z,1516697128.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:28.437Z,1516697128.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:28.847Z,1516697128.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:29.242Z,1516697129.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:29.638Z,1516697129.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:30.050Z,1516697130.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:30.446Z,1516697130.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:30.847Z,1516697130.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:33.939Z,1516697133.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:33.953Z,1516697133.953 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:45:33.954Z,1516697133.954 [NAL9602] No Fault, FailCount= 5 2018-01-23T08:45:34.024Z,1516697134.024 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:45:34.088Z,1516697134.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:34.410Z,1516697134.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:34.829Z,1516697134.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:35.207Z,1516697135.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:35.608Z,1516697135.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:36.006Z,1516697136.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:36.408Z,1516697136.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:36.804Z,1516697136.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:37.205Z,1516697137.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:37.605Z,1516697137.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:38.006Z,1516697138.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:38.413Z,1516697138.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:38.805Z,1516697138.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:39.205Z,1516697139.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:39.613Z,1516697139.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:40.008Z,1516697140.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:40.407Z,1516697140.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:40.808Z,1516697140.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:41.206Z,1516697141.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:41.656Z,1516697141.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:42.025Z,1516697142.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:42.421Z,1516697142.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:42.856Z,1516697142.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:43.266Z,1516697143.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:43.621Z,1516697143.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:44.074Z,1516697144.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:44.433Z,1516697144.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:44.844Z,1516697144.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:45.176Z,1516697145.176 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:45:45.250Z,1516697145.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:45.630Z,1516697145.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:46.048Z,1516697146.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:46.438Z,1516697146.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:46.856Z,1516697146.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:47.234Z,1516697147.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:47.637Z,1516697147.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:48.045Z,1516697148.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:48.433Z,1516697148.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:48.861Z,1516697148.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:49.262Z,1516697149.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:49.637Z,1516697149.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:50.023Z,1516697150.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:50.432Z,1516697150.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:50.825Z,1516697150.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:51.230Z,1516697151.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:51.648Z,1516697151.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:52.037Z,1516697152.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:52.441Z,1516697152.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:52.856Z,1516697152.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:53.214Z,1516697153.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:53.637Z,1516697153.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:54.017Z,1516697154.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:54.444Z,1516697154.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:54.844Z,1516697154.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:55.252Z,1516697155.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:55.644Z,1516697155.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:56.030Z,1516697156.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:56.451Z,1516697156.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:56.840Z,1516697156.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:57.266Z,1516697157.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:57.600Z,1516697157.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:58.014Z,1516697158.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:58.418Z,1516697158.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:58.813Z,1516697158.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:59.200Z,1516697159.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:45:59.601Z,1516697159.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:00.026Z,1516697160.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:00.401Z,1516697160.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:00.814Z,1516697160.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:01.217Z,1516697161.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:01.613Z,1516697161.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:02.013Z,1516697162.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:02.407Z,1516697162.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:02.813Z,1516697162.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:03.209Z,1516697163.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:03.605Z,1516697163.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:04.014Z,1516697164.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:04.435Z,1516697164.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:04.817Z,1516697164.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:05.209Z,1516697165.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:05.612Z,1516697165.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:06.008Z,1516697166.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:06.412Z,1516697166.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:06.810Z,1516697166.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:07.213Z,1516697167.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:07.636Z,1516697167.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:08.013Z,1516697168.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:08.408Z,1516697168.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:08.817Z,1516697168.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:09.209Z,1516697169.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:09.606Z,1516697169.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:10.026Z,1516697170.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:10.418Z,1516697170.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:10.817Z,1516697170.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:11.209Z,1516697171.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:11.620Z,1516697171.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:12.012Z,1516697172.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:12.412Z,1516697172.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:12.818Z,1516697172.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:13.216Z,1516697173.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:13.625Z,1516697173.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:14.008Z,1516697174.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:14.407Z,1516697174.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:14.813Z,1516697174.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:15.220Z,1516697175.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:15.608Z,1516697175.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:16.030Z,1516697176.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:16.429Z,1516697176.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:16.429Z,1516697176.429 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110 2018-01-23T08:46:16.429Z,1516697176.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:46:16.431Z,1516697176.431 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:16.431Z,1516697176.431 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110 2018-01-23T08:46:16.431Z,1516697176.431 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:46:16.433Z,1516697176.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:16.433Z,1516697176.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110 2018-01-23T08:46:16.433Z,1516697176.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:46:16.469Z,1516697176.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:46:16.469Z,1516697176.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:46:16.470Z,1516697176.470 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:46:16.854Z,1516697176.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:46:16.854Z,1516697176.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110 2018-01-23T08:46:16.855Z,1516697176.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:46:16.855Z,1516697176.855 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110 2018-01-23T08:46:16.855Z,1516697176.855 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:46:16.856Z,1516697176.856 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110 2018-01-23T08:46:17.208Z,1516697177.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:46:17.209Z,1516697177.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:46:17.209Z,1516697177.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:46:17.209Z,1516697177.209 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:46:17.210Z,1516697177.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:46:17.210Z,1516697177.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:46:17.212Z,1516697177.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:46:17.212Z,1516697177.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:46:17.212Z,1516697177.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:46:17.620Z,1516697177.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:46:17.621Z,1516697177.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:18.010Z,1516697178.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:46:18.012Z,1516697178.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:18.410Z,1516697178.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:46:18.411Z,1516697178.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:18.826Z,1516697178.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:46:18.828Z,1516697178.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:19.228Z,1516697179.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:46:19.229Z,1516697179.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:19.621Z,1516697179.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:46:19.622Z,1516697179.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:20.014Z,1516697180.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:46:20.015Z,1516697180.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:20.428Z,1516697180.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:46:20.429Z,1516697180.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:20.824Z,1516697180.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:46:20.825Z,1516697180.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:21.201Z,1516697181.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:46:21.202Z,1516697181.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:21.599Z,1516697181.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:46:21.600Z,1516697181.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:22.036Z,1516697182.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:46:22.037Z,1516697182.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:22.435Z,1516697182.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:46:22.436Z,1516697182.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:22.833Z,1516697182.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:46:22.834Z,1516697182.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:23.201Z,1516697183.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:46:23.202Z,1516697183.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:23.637Z,1516697183.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:46:23.638Z,1516697183.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:24.008Z,1516697184.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:46:24.009Z,1516697184.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:24.404Z,1516697184.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:46:24.405Z,1516697184.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:24.814Z,1516697184.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:46:24.815Z,1516697184.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:25.213Z,1516697185.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:46:25.214Z,1516697185.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:25.616Z,1516697185.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:46:25.617Z,1516697185.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:26.006Z,1516697186.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:46:26.007Z,1516697186.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:26.405Z,1516697186.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:46:26.406Z,1516697186.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:26.807Z,1516697186.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:46:26.808Z,1516697186.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:27.209Z,1516697187.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:46:27.210Z,1516697187.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:27.612Z,1516697187.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:46:27.613Z,1516697187.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:28.013Z,1516697188.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:46:28.014Z,1516697188.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:28.413Z,1516697188.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:46:28.414Z,1516697188.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:28.820Z,1516697188.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:46:28.821Z,1516697188.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:29.205Z,1516697189.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:46:29.206Z,1516697189.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:29.615Z,1516697189.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:46:29.616Z,1516697189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:30.007Z,1516697190.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:46:30.008Z,1516697190.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:30.405Z,1516697190.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:46:30.406Z,1516697190.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:30.813Z,1516697190.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:46:30.814Z,1516697190.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:31.212Z,1516697191.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:46:31.213Z,1516697191.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:34.316Z,1516697194.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T08:46:34.317Z,1516697194.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:34.424Z,1516697194.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:46:34.425Z,1516697194.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:34.809Z,1516697194.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:46:34.810Z,1516697194.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:35.212Z,1516697195.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:46:35.213Z,1516697195.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:35.610Z,1516697195.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:46:35.611Z,1516697195.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:36.017Z,1516697196.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:46:36.018Z,1516697196.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:36.424Z,1516697196.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:46:36.425Z,1516697196.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:36.821Z,1516697196.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:37.256Z,1516697197.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:37.610Z,1516697197.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:38.009Z,1516697198.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:38.425Z,1516697198.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:38.822Z,1516697198.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:39.225Z,1516697199.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:39.618Z,1516697199.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:40.019Z,1516697200.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:40.415Z,1516697200.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:40.825Z,1516697200.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:41.222Z,1516697201.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:41.618Z,1516697201.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:42.009Z,1516697202.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:42.411Z,1516697202.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:42.822Z,1516697202.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:43.221Z,1516697203.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:43.629Z,1516697203.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:44.016Z,1516697204.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:44.415Z,1516697204.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:44.818Z,1516697204.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:45.222Z,1516697205.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:45.625Z,1516697205.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:46.016Z,1516697206.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:46.421Z,1516697206.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:46.822Z,1516697206.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:47.226Z,1516697207.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:47.626Z,1516697207.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:48.016Z,1516697208.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:48.407Z,1516697208.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:48.814Z,1516697208.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:49.238Z,1516697209.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:49.613Z,1516697209.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:50.017Z,1516697210.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:50.410Z,1516697210.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:50.817Z,1516697210.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:51.241Z,1516697211.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:51.622Z,1516697211.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:52.015Z,1516697212.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:52.413Z,1516697212.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:52.826Z,1516697212.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:53.217Z,1516697213.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:53.618Z,1516697213.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:54.017Z,1516697214.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:54.412Z,1516697214.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:54.817Z,1516697214.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:55.219Z,1516697215.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:55.618Z,1516697215.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:56.022Z,1516697216.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:56.416Z,1516697216.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:56.822Z,1516697216.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:57.218Z,1516697217.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:57.649Z,1516697217.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:58.009Z,1516697218.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:58.408Z,1516697218.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:58.826Z,1516697218.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:59.227Z,1516697219.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:46:59.626Z,1516697219.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:00.015Z,1516697220.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:00.422Z,1516697220.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:00.827Z,1516697220.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:01.237Z,1516697221.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:01.632Z,1516697221.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:02.013Z,1516697222.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:02.416Z,1516697222.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:02.824Z,1516697222.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:03.222Z,1516697223.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:03.632Z,1516697223.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:04.017Z,1516697224.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:04.419Z,1516697224.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:04.822Z,1516697224.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:05.223Z,1516697225.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:05.629Z,1516697225.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:06.017Z,1516697226.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:06.421Z,1516697226.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:06.816Z,1516697226.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x12282 got:0x17072 2018-01-23T08:47:06.841Z,1516697226.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:07.222Z,1516697227.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:07.625Z,1516697227.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:08.017Z,1516697228.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:08.420Z,1516697228.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:08.825Z,1516697228.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:09.218Z,1516697229.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:09.623Z,1516697229.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:10.028Z,1516697230.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:10.393Z,1516697230.393 [PNI_TCM](ERROR): CRC does not match. Expected:0x2131 got:0x49181 2018-01-23T08:47:10.417Z,1516697230.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:10.820Z,1516697230.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:11.231Z,1516697231.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:11.622Z,1516697231.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:12.027Z,1516697232.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:12.421Z,1516697232.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:12.832Z,1516697232.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:13.220Z,1516697233.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:13.606Z,1516697233.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:14.027Z,1516697234.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:14.427Z,1516697234.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:14.828Z,1516697234.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:15.224Z,1516697235.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:15.593Z,1516697235.593 [PNI_TCM](ERROR): CRC does not match. Expected:0x36984 got:0x47322 2018-01-23T08:47:15.635Z,1516697235.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:16.032Z,1516697236.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:16.401Z,1516697236.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:16.807Z,1516697236.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:17.237Z,1516697237.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:17.637Z,1516697237.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:18.032Z,1516697238.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:18.414Z,1516697238.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:18.802Z,1516697238.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:19.236Z,1516697239.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:19.639Z,1516697239.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:20.025Z,1516697240.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:20.435Z,1516697240.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:20.832Z,1516697240.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:21.206Z,1516697241.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:21.612Z,1516697241.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:22.012Z,1516697242.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:22.433Z,1516697242.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:22.807Z,1516697242.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:23.217Z,1516697243.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:23.612Z,1516697243.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:24.035Z,1516697244.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:24.409Z,1516697244.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:24.812Z,1516697244.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:25.212Z,1516697245.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:25.617Z,1516697245.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:26.037Z,1516697246.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:26.417Z,1516697246.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:26.844Z,1516697246.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:27.239Z,1516697247.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:27.607Z,1516697247.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:28.012Z,1516697248.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:28.411Z,1516697248.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:28.809Z,1516697248.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:29.220Z,1516697249.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:29.621Z,1516697249.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:30.021Z,1516697250.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:30.024Z,1516697250.024 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:47:30.025Z,1516697250.025 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:47:30.025Z,1516697250.025 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:47:30.025Z,1516697250.025 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:47:30.425Z,1516697250.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:30.428Z,1516697250.428 [Default:CheckIn:D] Stopped 2018-01-23T08:47:30.428Z,1516697250.428 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:47:30.810Z,1516697250.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:30.813Z,1516697250.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 329.639453 min 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn:E] Stopped 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn] Stopped 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn](INFO): Running loop #33 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn] Running Loop=33 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:47:30.814Z,1516697250.814 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:47:31.219Z,1516697251.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:31.622Z,1516697251.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:34.711Z,1516697254.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:34.858Z,1516697254.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:35.204Z,1516697255.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:35.577Z,1516697255.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:35.976Z,1516697255.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:36.381Z,1516697256.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:36.776Z,1516697256.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:37.185Z,1516697257.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:37.582Z,1516697257.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:37.989Z,1516697257.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:38.374Z,1516697258.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:38.777Z,1516697258.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:39.176Z,1516697259.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:39.576Z,1516697259.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:39.989Z,1516697259.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:40.385Z,1516697260.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:40.789Z,1516697260.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:41.176Z,1516697261.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:41.575Z,1516697261.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:41.976Z,1516697261.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:42.378Z,1516697262.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:42.779Z,1516697262.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:43.185Z,1516697263.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:43.593Z,1516697263.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:43.986Z,1516697263.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:44.380Z,1516697264.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:44.784Z,1516697264.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:45.180Z,1516697265.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:45.575Z,1516697265.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:45.985Z,1516697265.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:46.390Z,1516697266.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:46.789Z,1516697266.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:47.177Z,1516697267.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:47.580Z,1516697267.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:47.977Z,1516697267.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:48.377Z,1516697268.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:48.780Z,1516697268.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:49.185Z,1516697269.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:49.589Z,1516697269.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:49.986Z,1516697269.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:50.377Z,1516697270.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:50.785Z,1516697270.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:51.178Z,1516697271.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:51.581Z,1516697271.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:51.986Z,1516697271.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:52.399Z,1516697272.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:52.790Z,1516697272.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:53.181Z,1516697273.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:53.578Z,1516697273.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:53.985Z,1516697273.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:54.384Z,1516697274.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:54.786Z,1516697274.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:55.187Z,1516697275.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:55.590Z,1516697275.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:55.996Z,1516697275.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:56.373Z,1516697276.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:56.784Z,1516697276.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:57.188Z,1516697277.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:57.565Z,1516697277.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:57.989Z,1516697277.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:58.392Z,1516697278.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:58.788Z,1516697278.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:59.193Z,1516697279.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:59.571Z,1516697279.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:47:59.969Z,1516697279.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:00.377Z,1516697280.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:00.775Z,1516697280.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:01.182Z,1516697281.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:01.605Z,1516697281.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:01.981Z,1516697281.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:02.381Z,1516697282.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:02.775Z,1516697282.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:03.176Z,1516697283.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:03.574Z,1516697283.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:03.994Z,1516697283.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:04.384Z,1516697284.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:04.793Z,1516697284.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:05.175Z,1516697285.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:05.580Z,1516697285.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:05.980Z,1516697285.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:06.384Z,1516697286.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:06.776Z,1516697286.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:07.186Z,1516697287.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:07.586Z,1516697287.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:07.987Z,1516697287.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:08.387Z,1516697288.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:08.780Z,1516697288.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:09.178Z,1516697289.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:09.578Z,1516697289.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:09.994Z,1516697289.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:10.394Z,1516697290.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:10.795Z,1516697290.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:11.189Z,1516697291.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:11.580Z,1516697291.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:11.980Z,1516697291.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:12.388Z,1516697292.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:12.779Z,1516697292.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:13.199Z,1516697293.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:13.593Z,1516697293.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:13.988Z,1516697293.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:14.385Z,1516697294.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:14.789Z,1516697294.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:15.184Z,1516697295.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:15.573Z,1516697295.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:15.998Z,1516697295.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:16.392Z,1516697296.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:16.796Z,1516697296.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:17.187Z,1516697297.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:17.588Z,1516697297.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:17.987Z,1516697297.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:18.376Z,1516697298.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:18.796Z,1516697298.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:19.197Z,1516697299.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:19.597Z,1516697299.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:19.992Z,1516697299.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:20.365Z,1516697300.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:20.773Z,1516697300.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:21.172Z,1516697301.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:21.572Z,1516697301.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:21.998Z,1516697301.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:22.397Z,1516697302.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:22.795Z,1516697302.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:23.197Z,1516697303.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:23.602Z,1516697303.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:23.997Z,1516697303.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:24.376Z,1516697304.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:24.779Z,1516697304.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:25.178Z,1516697305.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:25.582Z,1516697305.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:26.007Z,1516697306.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:26.372Z,1516697306.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:26.774Z,1516697306.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:27.175Z,1516697307.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:27.572Z,1516697307.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:27.978Z,1516697307.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:28.381Z,1516697308.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:28.806Z,1516697308.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:29.176Z,1516697309.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:29.584Z,1516697309.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:29.985Z,1516697309.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:30.389Z,1516697310.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:30.792Z,1516697310.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:31.180Z,1516697311.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:31.577Z,1516697311.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:31.986Z,1516697311.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:35.082Z,1516697315.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:35.225Z,1516697315.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:35.569Z,1516697315.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:35.974Z,1516697315.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:36.348Z,1516697316.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:36.751Z,1516697316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:37.158Z,1516697317.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:37.550Z,1516697317.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:37.976Z,1516697317.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:38.346Z,1516697318.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:38.745Z,1516697318.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:39.153Z,1516697319.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:39.548Z,1516697319.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:39.977Z,1516697319.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:40.358Z,1516697320.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:40.781Z,1516697320.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:41.146Z,1516697321.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:41.547Z,1516697321.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:41.948Z,1516697321.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:42.357Z,1516697322.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:42.761Z,1516697322.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:43.158Z,1516697323.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:43.546Z,1516697323.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:43.956Z,1516697323.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:44.350Z,1516697324.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:44.749Z,1516697324.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:45.154Z,1516697325.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:45.554Z,1516697325.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:45.955Z,1516697325.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:46.350Z,1516697326.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:46.758Z,1516697326.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:47.149Z,1516697327.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:47.551Z,1516697327.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:47.949Z,1516697327.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:48.365Z,1516697328.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:48.765Z,1516697328.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:49.158Z,1516697329.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:49.549Z,1516697329.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:49.955Z,1516697329.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:50.352Z,1516697330.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:50.769Z,1516697330.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:51.165Z,1516697331.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:51.563Z,1516697331.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:51.966Z,1516697331.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:52.355Z,1516697332.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:52.749Z,1516697332.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:53.156Z,1516697333.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:53.555Z,1516697333.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:53.950Z,1516697333.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:54.363Z,1516697334.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:54.762Z,1516697334.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:55.164Z,1516697335.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:55.549Z,1516697335.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:55.957Z,1516697335.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:56.356Z,1516697336.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:56.745Z,1516697336.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:57.165Z,1516697337.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:57.563Z,1516697337.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:57.960Z,1516697337.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:58.359Z,1516697338.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:58.760Z,1516697338.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:59.137Z,1516697339.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:59.540Z,1516697339.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:48:59.943Z,1516697339.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:00.366Z,1516697340.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:00.777Z,1516697340.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:01.172Z,1516697341.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:01.545Z,1516697341.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:01.944Z,1516697341.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:02.345Z,1516697342.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:02.749Z,1516697342.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:03.154Z,1516697343.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:03.579Z,1516697343.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:03.975Z,1516697343.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:04.352Z,1516697344.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:04.748Z,1516697344.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:05.144Z,1516697345.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:05.567Z,1516697345.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:05.948Z,1516697345.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:06.350Z,1516697346.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:06.754Z,1516697346.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:07.190Z,1516697347.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:07.545Z,1516697347.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:07.948Z,1516697347.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:08.347Z,1516697348.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:08.747Z,1516697348.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:09.150Z,1516697349.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:09.560Z,1516697349.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:09.962Z,1516697349.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:10.347Z,1516697350.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:10.756Z,1516697350.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:11.147Z,1516697351.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:11.553Z,1516697351.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:11.953Z,1516697351.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:12.353Z,1516697352.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:12.754Z,1516697352.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:13.154Z,1516697353.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:13.546Z,1516697353.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:13.956Z,1516697353.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:14.353Z,1516697354.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:14.746Z,1516697354.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:15.165Z,1516697355.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:15.561Z,1516697355.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:15.957Z,1516697355.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:16.365Z,1516697356.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:16.757Z,1516697356.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:17.159Z,1516697357.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:17.556Z,1516697357.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:17.556Z,1516697357.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111 2018-01-23T08:49:17.556Z,1516697357.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:49:17.558Z,1516697357.558 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:17.558Z,1516697357.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111 2018-01-23T08:49:17.558Z,1516697357.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:49:17.560Z,1516697357.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:17.560Z,1516697357.560 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111 2018-01-23T08:49:17.560Z,1516697357.560 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:49:17.584Z,1516697357.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:49:17.584Z,1516697357.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:49:17.585Z,1516697357.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:49:17.991Z,1516697357.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:49:17.991Z,1516697357.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111 2018-01-23T08:49:17.992Z,1516697357.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:49:17.992Z,1516697357.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111 2018-01-23T08:49:17.992Z,1516697357.992 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:49:17.992Z,1516697357.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111 2018-01-23T08:49:18.369Z,1516697358.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:49:18.370Z,1516697358.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:49:18.370Z,1516697358.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:49:18.370Z,1516697358.370 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:49:18.375Z,1516697358.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:49:18.375Z,1516697358.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:49:18.376Z,1516697358.376 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:49:18.376Z,1516697358.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:49:18.376Z,1516697358.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:49:18.768Z,1516697358.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:49:18.769Z,1516697358.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:19.154Z,1516697359.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:49:19.167Z,1516697359.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:19.547Z,1516697359.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:49:19.548Z,1516697359.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:19.947Z,1516697359.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:49:19.948Z,1516697359.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:20.352Z,1516697360.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:49:20.353Z,1516697360.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:20.748Z,1516697360.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:49:20.749Z,1516697360.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:21.162Z,1516697361.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:49:21.179Z,1516697361.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:21.554Z,1516697361.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:49:21.555Z,1516697361.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:21.959Z,1516697361.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:49:21.960Z,1516697361.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:22.353Z,1516697362.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:49:22.354Z,1516697362.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:22.761Z,1516697362.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:49:22.762Z,1516697362.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:23.152Z,1516697363.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:49:23.153Z,1516697363.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:23.560Z,1516697363.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:49:23.561Z,1516697363.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:23.953Z,1516697363.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:49:23.954Z,1516697363.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:24.358Z,1516697364.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:49:24.359Z,1516697364.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:24.763Z,1516697364.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:49:24.764Z,1516697364.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:25.160Z,1516697365.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:49:25.161Z,1516697365.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:25.560Z,1516697365.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:49:25.561Z,1516697365.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:25.957Z,1516697365.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:49:25.958Z,1516697365.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:26.368Z,1516697366.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:49:26.369Z,1516697366.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:26.760Z,1516697366.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:49:26.761Z,1516697366.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:27.165Z,1516697367.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:49:27.166Z,1516697367.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:27.569Z,1516697367.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:49:27.570Z,1516697367.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:27.969Z,1516697367.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:49:27.970Z,1516697367.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:28.372Z,1516697368.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:49:28.373Z,1516697368.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:28.748Z,1516697368.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:49:28.749Z,1516697368.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:29.145Z,1516697369.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:49:29.146Z,1516697369.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:29.547Z,1516697369.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:49:29.548Z,1516697369.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:29.957Z,1516697369.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:49:29.958Z,1516697369.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:30.379Z,1516697370.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:49:30.380Z,1516697370.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:30.754Z,1516697370.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:49:30.756Z,1516697370.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:31.161Z,1516697371.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:49:31.162Z,1516697371.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:31.556Z,1516697371.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:49:31.557Z,1516697371.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:31.952Z,1516697371.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:49:31.953Z,1516697371.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:32.349Z,1516697372.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:49:32.350Z,1516697372.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:35.443Z,1516697375.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T08:49:35.444Z,1516697375.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:35.608Z,1516697375.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T08:49:35.609Z,1516697375.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:35.913Z,1516697375.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:49:35.914Z,1516697375.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:36.343Z,1516697376.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:49:36.344Z,1516697376.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:36.704Z,1516697376.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T08:49:36.705Z,1516697376.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:37.106Z,1516697377.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:49:37.107Z,1516697377.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:37.508Z,1516697377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:49:37.508Z,1516697377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:37.907Z,1516697377.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:38.314Z,1516697378.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:38.717Z,1516697378.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:39.117Z,1516697379.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:39.511Z,1516697379.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:39.907Z,1516697379.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:40.309Z,1516697380.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:40.707Z,1516697380.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:41.120Z,1516697381.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:41.517Z,1516697381.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:41.914Z,1516697381.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:42.312Z,1516697382.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:42.706Z,1516697382.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:43.111Z,1516697383.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:43.511Z,1516697383.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:43.906Z,1516697383.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:44.317Z,1516697384.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:44.742Z,1516697384.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:45.117Z,1516697385.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:45.511Z,1516697385.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:45.908Z,1516697385.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:46.309Z,1516697386.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:46.706Z,1516697386.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:47.113Z,1516697387.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:47.517Z,1516697387.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:47.943Z,1516697387.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:48.312Z,1516697388.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:48.707Z,1516697388.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:49.117Z,1516697389.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:49.511Z,1516697389.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:49.908Z,1516697389.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:50.321Z,1516697390.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:50.718Z,1516697390.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:51.121Z,1516697391.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:51.514Z,1516697391.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:51.908Z,1516697391.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:52.309Z,1516697392.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:52.716Z,1516697392.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:53.125Z,1516697393.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:53.518Z,1516697393.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:53.917Z,1516697393.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:54.312Z,1516697394.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:54.716Z,1516697394.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:55.117Z,1516697395.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:55.529Z,1516697395.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:55.921Z,1516697395.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:56.317Z,1516697396.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:56.710Z,1516697396.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:57.119Z,1516697397.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:57.523Z,1516697397.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:57.929Z,1516697397.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:58.315Z,1516697398.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:58.725Z,1516697398.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:59.133Z,1516697399.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:59.526Z,1516697399.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:49:59.933Z,1516697399.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:00.321Z,1516697400.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:00.716Z,1516697400.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:01.141Z,1516697401.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:01.533Z,1516697401.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:01.922Z,1516697401.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:02.312Z,1516697402.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:02.713Z,1516697402.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:03.128Z,1516697403.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:03.533Z,1516697403.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:03.925Z,1516697403.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:04.302Z,1516697404.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:04.728Z,1516697404.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:05.130Z,1516697405.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:05.529Z,1516697405.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:05.929Z,1516697405.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:06.308Z,1516697406.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:06.727Z,1516697406.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:07.134Z,1516697407.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:07.535Z,1516697407.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:07.932Z,1516697407.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:08.316Z,1516697408.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:08.707Z,1516697408.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:09.122Z,1516697409.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:09.518Z,1516697409.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:09.925Z,1516697409.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:10.311Z,1516697410.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:10.716Z,1516697410.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:11.114Z,1516697411.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:11.526Z,1516697411.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:11.918Z,1516697411.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:12.312Z,1516697412.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:12.714Z,1516697412.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:13.130Z,1516697413.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:13.521Z,1516697413.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:13.929Z,1516697413.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:14.310Z,1516697414.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:14.709Z,1516697414.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:15.125Z,1516697415.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:15.524Z,1516697415.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:15.928Z,1516697415.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:16.321Z,1516697416.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:16.725Z,1516697416.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:17.128Z,1516697417.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:17.529Z,1516697417.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:17.929Z,1516697417.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:18.316Z,1516697418.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:18.716Z,1516697418.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:19.121Z,1516697419.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:19.522Z,1516697419.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:19.929Z,1516697419.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:20.319Z,1516697420.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:20.759Z,1516697420.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:21.121Z,1516697421.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:21.521Z,1516697421.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:21.930Z,1516697421.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:22.314Z,1516697422.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:22.715Z,1516697422.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:23.122Z,1516697423.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:23.533Z,1516697423.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:23.933Z,1516697423.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:24.314Z,1516697424.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:24.713Z,1516697424.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:25.121Z,1516697425.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:25.525Z,1516697425.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:25.920Z,1516697425.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:26.313Z,1516697426.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:26.717Z,1516697426.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:27.115Z,1516697427.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:27.524Z,1516697427.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:27.928Z,1516697427.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:28.333Z,1516697428.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:28.721Z,1516697428.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:29.121Z,1516697429.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:29.512Z,1516697429.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:29.918Z,1516697429.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:30.332Z,1516697430.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:30.723Z,1516697430.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:31.121Z,1516697431.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:31.520Z,1516697431.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:31.916Z,1516697431.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:32.317Z,1516697432.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:32.719Z,1516697432.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:35.820Z,1516697435.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:35.950Z,1516697435.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:36.324Z,1516697436.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:36.697Z,1516697436.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:37.093Z,1516697437.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:37.496Z,1516697437.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:37.889Z,1516697437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:38.294Z,1516697438.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:38.695Z,1516697438.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:39.104Z,1516697439.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:39.497Z,1516697439.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:39.887Z,1516697439.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:40.287Z,1516697440.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:40.689Z,1516697440.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:41.088Z,1516697441.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:41.497Z,1516697441.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:41.901Z,1516697441.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:42.308Z,1516697442.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:42.691Z,1516697442.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:43.091Z,1516697443.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:43.498Z,1516697443.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:43.887Z,1516697443.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:44.297Z,1516697444.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:44.706Z,1516697444.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:45.102Z,1516697445.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:45.497Z,1516697445.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:45.895Z,1516697445.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:46.298Z,1516697446.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:46.692Z,1516697446.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:47.095Z,1516697447.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:47.498Z,1516697447.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:47.901Z,1516697447.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:48.299Z,1516697448.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:48.698Z,1516697448.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:49.093Z,1516697449.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:49.500Z,1516697449.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:49.894Z,1516697449.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:50.302Z,1516697450.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:50.703Z,1516697450.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:51.099Z,1516697451.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:51.497Z,1516697451.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:51.899Z,1516697451.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:52.300Z,1516697452.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:52.699Z,1516697452.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:53.101Z,1516697453.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:53.508Z,1516697453.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:53.905Z,1516697453.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:54.308Z,1516697454.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:54.698Z,1516697454.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:55.099Z,1516697455.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:55.492Z,1516697455.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:55.878Z,1516697455.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:56.306Z,1516697456.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:56.717Z,1516697456.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:57.115Z,1516697457.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:57.509Z,1516697457.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:57.888Z,1516697457.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:58.286Z,1516697458.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:58.687Z,1516697458.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:59.087Z,1516697459.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:59.492Z,1516697459.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:50:59.894Z,1516697459.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:00.290Z,1516697460.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:00.690Z,1516697460.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:01.088Z,1516697461.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:01.488Z,1516697461.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:01.892Z,1516697461.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:02.290Z,1516697462.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:02.694Z,1516697462.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:03.096Z,1516697463.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:03.493Z,1516697463.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:03.896Z,1516697463.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:04.292Z,1516697464.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:04.693Z,1516697464.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:05.093Z,1516697465.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:05.494Z,1516697465.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:05.898Z,1516697465.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:06.297Z,1516697466.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:06.692Z,1516697466.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:07.091Z,1516697467.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:07.489Z,1516697467.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:07.887Z,1516697467.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:08.293Z,1516697468.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:08.694Z,1516697468.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:09.093Z,1516697469.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:09.491Z,1516697469.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:09.887Z,1516697469.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:10.288Z,1516697470.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:10.701Z,1516697470.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:11.095Z,1516697471.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:11.504Z,1516697471.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:11.905Z,1516697471.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:12.305Z,1516697472.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:12.694Z,1516697472.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:13.097Z,1516697473.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:13.498Z,1516697473.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:13.902Z,1516697473.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:14.301Z,1516697474.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:14.705Z,1516697474.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:15.101Z,1516697475.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:15.490Z,1516697475.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:15.893Z,1516697475.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:16.302Z,1516697476.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:16.699Z,1516697476.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:17.097Z,1516697477.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:17.501Z,1516697477.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:17.903Z,1516697477.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:18.312Z,1516697478.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:18.691Z,1516697478.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:19.093Z,1516697479.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:19.496Z,1516697479.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:19.898Z,1516697479.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:20.298Z,1516697480.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:20.701Z,1516697480.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:21.107Z,1516697481.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:21.495Z,1516697481.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:21.895Z,1516697481.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:22.298Z,1516697482.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:22.695Z,1516697482.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:23.095Z,1516697483.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:23.512Z,1516697483.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:23.899Z,1516697483.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:24.299Z,1516697484.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:24.698Z,1516697484.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:25.093Z,1516697485.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:25.495Z,1516697485.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:25.898Z,1516697485.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:26.299Z,1516697486.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:26.703Z,1516697486.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:27.104Z,1516697487.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:27.493Z,1516697487.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:27.889Z,1516697487.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:28.299Z,1516697488.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:28.693Z,1516697488.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:29.095Z,1516697489.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:29.509Z,1516697489.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:29.905Z,1516697489.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:30.298Z,1516697490.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:30.696Z,1516697490.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:31.097Z,1516697491.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:31.496Z,1516697491.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:31.896Z,1516697491.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:32.302Z,1516697492.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:32.712Z,1516697492.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:33.102Z,1516697493.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:36.187Z,1516697496.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:36.339Z,1516697496.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:36.665Z,1516697496.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:37.065Z,1516697497.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:37.465Z,1516697497.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:37.851Z,1516697497.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:38.251Z,1516697498.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:38.656Z,1516697498.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:39.061Z,1516697499.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:39.465Z,1516697499.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:39.864Z,1516697499.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:40.261Z,1516697500.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:40.659Z,1516697500.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:41.061Z,1516697501.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:41.453Z,1516697501.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:41.856Z,1516697501.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:42.273Z,1516697502.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:42.669Z,1516697502.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:43.072Z,1516697503.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:43.456Z,1516697503.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:43.858Z,1516697503.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:44.267Z,1516697504.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:44.673Z,1516697504.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:45.062Z,1516697505.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:45.461Z,1516697505.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:45.857Z,1516697505.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:46.268Z,1516697506.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:46.666Z,1516697506.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:47.062Z,1516697507.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:47.460Z,1516697507.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:47.861Z,1516697507.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:48.265Z,1516697508.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:48.708Z,1516697508.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:49.073Z,1516697509.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:49.461Z,1516697509.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:49.863Z,1516697509.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:50.269Z,1516697510.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:50.670Z,1516697510.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:51.066Z,1516697511.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:51.467Z,1516697511.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:51.860Z,1516697511.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:52.267Z,1516697512.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:52.676Z,1516697512.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:53.068Z,1516697513.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:53.457Z,1516697513.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:53.871Z,1516697513.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:54.273Z,1516697514.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:54.668Z,1516697514.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:55.075Z,1516697515.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:55.441Z,1516697515.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:55.844Z,1516697515.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:56.248Z,1516697516.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:56.670Z,1516697516.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:57.078Z,1516697517.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:57.476Z,1516697517.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:57.848Z,1516697517.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:58.251Z,1516697518.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:58.651Z,1516697518.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:59.051Z,1516697519.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:59.478Z,1516697519.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:51:59.883Z,1516697519.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:00.254Z,1516697520.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:00.648Z,1516697520.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:01.050Z,1516697521.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:01.451Z,1516697521.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:01.850Z,1516697521.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:02.251Z,1516697522.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:02.661Z,1516697522.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:03.062Z,1516697523.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:03.464Z,1516697523.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:03.856Z,1516697523.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:04.251Z,1516697524.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:04.652Z,1516697524.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:05.050Z,1516697525.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:05.461Z,1516697525.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:05.861Z,1516697525.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:06.261Z,1516697526.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:06.662Z,1516697526.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:07.051Z,1516697527.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:07.450Z,1516697527.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:07.860Z,1516697527.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:08.255Z,1516697528.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:08.661Z,1516697528.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:09.069Z,1516697529.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:09.465Z,1516697529.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:09.861Z,1516697529.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:10.253Z,1516697530.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:10.661Z,1516697530.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:11.061Z,1516697531.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:11.469Z,1516697531.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:11.865Z,1516697531.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:12.261Z,1516697532.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:12.653Z,1516697532.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:13.051Z,1516697533.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:13.457Z,1516697533.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:13.853Z,1516697533.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:14.262Z,1516697534.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:14.663Z,1516697534.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:15.070Z,1516697535.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:15.463Z,1516697535.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:15.859Z,1516697535.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:16.259Z,1516697536.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:16.664Z,1516697536.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:17.061Z,1516697537.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:17.462Z,1516697537.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:17.866Z,1516697537.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:18.265Z,1516697538.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:18.661Z,1516697538.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:18.661Z,1516697538.661 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112 2018-01-23T08:52:18.661Z,1516697538.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:52:18.667Z,1516697538.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:18.667Z,1516697538.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112 2018-01-23T08:52:18.667Z,1516697538.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:52:18.669Z,1516697538.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:18.669Z,1516697538.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112 2018-01-23T08:52:18.669Z,1516697538.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:52:18.697Z,1516697538.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:52:18.698Z,1516697538.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:52:18.698Z,1516697538.698 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:52:19.082Z,1516697539.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:52:19.082Z,1516697539.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112 2018-01-23T08:52:19.083Z,1516697539.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:52:19.083Z,1516697539.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112 2018-01-23T08:52:19.083Z,1516697539.083 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:52:19.083Z,1516697539.083 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112 2018-01-23T08:52:19.444Z,1516697539.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:52:19.444Z,1516697539.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:52:19.445Z,1516697539.445 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:52:19.445Z,1516697539.445 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:52:19.445Z,1516697539.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:52:19.446Z,1516697539.446 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:52:19.446Z,1516697539.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:52:19.446Z,1516697539.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:52:19.463Z,1516697539.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:52:19.868Z,1516697539.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:52:19.869Z,1516697539.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:20.272Z,1516697540.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:52:20.273Z,1516697540.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:20.674Z,1516697540.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:52:20.675Z,1516697540.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:21.076Z,1516697541.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:52:21.077Z,1516697541.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:21.467Z,1516697541.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:52:21.468Z,1516697541.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:21.869Z,1516697541.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:52:21.870Z,1516697541.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:22.269Z,1516697542.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:52:22.269Z,1516697542.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:22.670Z,1516697542.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:52:22.671Z,1516697542.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:23.069Z,1516697543.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:52:23.069Z,1516697543.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:23.472Z,1516697543.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:52:23.473Z,1516697543.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:23.868Z,1516697543.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:52:23.869Z,1516697543.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:24.266Z,1516697544.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:52:24.271Z,1516697544.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:24.672Z,1516697544.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:52:24.673Z,1516697544.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:25.048Z,1516697545.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:52:25.049Z,1516697545.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:25.448Z,1516697545.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:52:25.449Z,1516697545.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:25.852Z,1516697545.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:52:25.853Z,1516697545.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:26.251Z,1516697546.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:52:26.252Z,1516697546.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:26.680Z,1516697546.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:52:26.681Z,1516697546.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:27.077Z,1516697547.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:52:27.078Z,1516697547.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:27.466Z,1516697547.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:52:27.491Z,1516697547.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:27.854Z,1516697547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:52:27.855Z,1516697547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:28.255Z,1516697548.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:52:28.256Z,1516697548.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:28.654Z,1516697548.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:52:28.655Z,1516697548.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:29.056Z,1516697549.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:52:29.056Z,1516697549.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:29.470Z,1516697549.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:52:29.487Z,1516697549.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:29.862Z,1516697549.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:52:29.863Z,1516697549.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:30.264Z,1516697550.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:52:30.265Z,1516697550.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:30.657Z,1516697550.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:52:30.658Z,1516697550.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:31.053Z,1516697551.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:52:31.054Z,1516697551.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:31.057Z,1516697551.057 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:47:30.8Z 2018-01-23T08:52:31.057Z,1516697551.057 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T08:52:31.058Z,1516697551.058 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T08:52:31.473Z,1516697551.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:52:31.474Z,1516697551.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:31.977Z,1516697551.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T08:52:31.977Z,1516697551.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:32.253Z,1516697552.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:52:32.254Z,1516697552.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:35.426Z,1516697555.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:52:35.427Z,1516697555.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:35.516Z,1516697555.516 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0132.lzma 2018-01-23T08:52:35.596Z,1516697555.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T08:52:35.596Z,1516697555.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:35.936Z,1516697555.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T08:52:35.937Z,1516697555.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:36.281Z,1516697556.281 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0132.lzma.bak 2018-01-23T08:52:36.281Z,1516697556.281 [DataOverHttps](INFO): SBD MOMSN=7755306 2018-01-23T08:52:36.342Z,1516697556.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T08:52:36.343Z,1516697556.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:36.968Z,1516697556.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T08:52:36.969Z,1516697556.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:37.168Z,1516697557.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T08:52:37.169Z,1516697557.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:40.228Z,1516697560.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:40.385Z,1516697560.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:40.741Z,1516697560.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:41.097Z,1516697561.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:41.493Z,1516697561.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:41.892Z,1516697561.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:44.986Z,1516697564.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:45.063Z,1516697565.063 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0133.lzma 2018-01-23T08:52:45.129Z,1516697565.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:45.490Z,1516697565.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:45.841Z,1516697565.841 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0133.lzma.bak 2018-01-23T08:52:45.841Z,1516697565.841 [DataOverHttps](INFO): SBD MOMSN=7755309 2018-01-23T08:52:45.924Z,1516697565.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:46.597Z,1516697566.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:46.600Z,1516697566.600 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T08:52:46.600Z,1516697566.600 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T08:52:46.600Z,1516697566.600 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T08:52:46.732Z,1516697566.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:49.854Z,1516697569.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:50.005Z,1516697570.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:50.378Z,1516697570.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:50.752Z,1516697570.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:51.153Z,1516697571.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:51.549Z,1516697571.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:51.940Z,1516697571.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:52.361Z,1516697572.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:52.753Z,1516697572.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:53.165Z,1516697573.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:53.537Z,1516697573.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:53.941Z,1516697573.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:54.356Z,1516697574.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:54.750Z,1516697574.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:55.154Z,1516697575.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:55.541Z,1516697575.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:55.941Z,1516697575.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:56.354Z,1516697576.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:56.753Z,1516697576.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:57.154Z,1516697577.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:57.557Z,1516697577.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:57.968Z,1516697577.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:58.360Z,1516697578.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:58.762Z,1516697578.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:59.168Z,1516697579.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:59.537Z,1516697579.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:52:59.940Z,1516697579.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:00.343Z,1516697580.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:00.750Z,1516697580.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:01.171Z,1516697581.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:01.575Z,1516697581.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:01.953Z,1516697581.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:02.349Z,1516697582.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:02.754Z,1516697582.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:03.153Z,1516697583.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:03.562Z,1516697583.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:03.957Z,1516697583.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:04.414Z,1516697584.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:04.757Z,1516697584.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:05.151Z,1516697585.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:05.546Z,1516697585.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:05.956Z,1516697585.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:06.352Z,1516697586.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:06.759Z,1516697586.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:07.161Z,1516697587.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:07.557Z,1516697587.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:07.948Z,1516697587.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:08.348Z,1516697588.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:08.752Z,1516697588.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:09.146Z,1516697589.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:09.565Z,1516697589.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:09.960Z,1516697589.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:10.357Z,1516697590.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:10.749Z,1516697590.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:11.152Z,1516697591.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:11.547Z,1516697591.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:11.958Z,1516697591.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:12.352Z,1516697592.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:12.757Z,1516697592.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:13.161Z,1516697593.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:13.562Z,1516697593.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:13.955Z,1516697593.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:14.352Z,1516697594.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:14.750Z,1516697594.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:15.160Z,1516697595.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:15.566Z,1516697595.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:15.963Z,1516697595.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:16.381Z,1516697596.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:16.756Z,1516697596.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:17.168Z,1516697597.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:17.538Z,1516697597.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:17.941Z,1516697597.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:18.340Z,1516697598.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:18.779Z,1516697598.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:19.177Z,1516697599.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:19.569Z,1516697599.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:19.944Z,1516697599.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:20.379Z,1516697600.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:20.744Z,1516697600.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:21.145Z,1516697601.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:21.554Z,1516697601.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:21.960Z,1516697601.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:22.357Z,1516697602.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:22.747Z,1516697602.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:23.147Z,1516697603.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:23.544Z,1516697603.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:23.952Z,1516697603.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:24.347Z,1516697604.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:24.750Z,1516697604.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:25.154Z,1516697605.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:25.580Z,1516697605.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:25.948Z,1516697605.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:26.348Z,1516697606.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:26.747Z,1516697606.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:27.145Z,1516697607.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:27.550Z,1516697607.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:27.953Z,1516697607.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:28.350Z,1516697608.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:28.746Z,1516697608.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:29.147Z,1516697609.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:29.550Z,1516697609.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:29.946Z,1516697609.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:30.352Z,1516697610.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:30.750Z,1516697610.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:31.154Z,1516697611.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:31.581Z,1516697611.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:31.948Z,1516697611.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:32.349Z,1516697612.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:32.747Z,1516697612.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:33.145Z,1516697613.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:33.550Z,1516697613.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:33.953Z,1516697613.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:34.350Z,1516697614.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:34.746Z,1516697614.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:35.146Z,1516697615.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:35.546Z,1516697615.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:35.953Z,1516697615.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:36.352Z,1516697616.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:36.750Z,1516697616.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:37.154Z,1516697617.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:37.577Z,1516697617.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:37.946Z,1516697617.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:38.353Z,1516697618.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:38.752Z,1516697618.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:39.146Z,1516697619.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:39.557Z,1516697619.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:39.958Z,1516697619.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:40.357Z,1516697620.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:40.752Z,1516697620.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:41.152Z,1516697621.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:41.547Z,1516697621.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:41.956Z,1516697621.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:42.353Z,1516697622.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:42.757Z,1516697622.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:43.162Z,1516697623.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:43.558Z,1516697623.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:43.949Z,1516697623.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:44.354Z,1516697624.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:44.753Z,1516697624.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:45.148Z,1516697625.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:45.562Z,1516697625.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:45.965Z,1516697625.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:46.361Z,1516697626.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:46.757Z,1516697626.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:47.161Z,1516697627.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:50.234Z,1516697630.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:50.363Z,1516697630.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:50.762Z,1516697630.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:51.142Z,1516697631.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:51.536Z,1516697631.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:51.935Z,1516697631.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:52.337Z,1516697632.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:52.734Z,1516697632.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:53.130Z,1516697633.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:53.535Z,1516697633.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:53.941Z,1516697633.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:54.340Z,1516697634.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:54.737Z,1516697634.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:55.131Z,1516697635.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:55.529Z,1516697635.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:55.930Z,1516697635.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:56.330Z,1516697636.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:56.739Z,1516697636.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:57.149Z,1516697637.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:57.545Z,1516697637.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:57.931Z,1516697637.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:58.331Z,1516697638.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:58.729Z,1516697638.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:59.132Z,1516697639.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:59.538Z,1516697639.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:53:59.941Z,1516697639.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:00.344Z,1516697640.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:00.737Z,1516697640.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:01.129Z,1516697641.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:01.536Z,1516697641.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:01.932Z,1516697641.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:02.333Z,1516697642.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:02.742Z,1516697642.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:03.145Z,1516697643.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:03.543Z,1516697643.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:03.938Z,1516697643.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:04.333Z,1516697644.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:04.735Z,1516697644.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:05.136Z,1516697645.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:05.542Z,1516697645.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:05.946Z,1516697645.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:06.339Z,1516697646.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:06.735Z,1516697646.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:07.137Z,1516697647.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:07.541Z,1516697647.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:07.939Z,1516697647.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:08.339Z,1516697648.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:08.749Z,1516697648.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:09.145Z,1516697649.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:09.547Z,1516697649.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:09.940Z,1516697649.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:10.339Z,1516697650.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:10.728Z,1516697650.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:11.148Z,1516697651.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:11.549Z,1516697651.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:11.951Z,1516697651.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:12.341Z,1516697652.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:12.721Z,1516697652.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:13.125Z,1516697653.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:13.527Z,1516697653.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:13.928Z,1516697653.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:14.333Z,1516697654.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:14.757Z,1516697654.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:15.151Z,1516697655.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:15.551Z,1516697655.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:15.931Z,1516697655.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:16.328Z,1516697656.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:16.726Z,1516697656.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:17.126Z,1516697657.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:17.534Z,1516697657.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:17.938Z,1516697657.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:18.341Z,1516697658.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:18.731Z,1516697658.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:18.744Z,1516697658.744 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T08:54:19.126Z,1516697659.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:19.528Z,1516697659.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:19.937Z,1516697659.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:20.327Z,1516697660.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:20.740Z,1516697660.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:21.146Z,1516697661.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:21.541Z,1516697661.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:21.940Z,1516697661.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:22.337Z,1516697662.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:22.735Z,1516697662.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:23.140Z,1516697663.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:23.542Z,1516697663.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:23.945Z,1516697663.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:24.339Z,1516697664.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:24.732Z,1516697664.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:25.139Z,1516697665.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:25.543Z,1516697665.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:25.942Z,1516697665.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:26.347Z,1516697666.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:26.740Z,1516697666.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:27.145Z,1516697667.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:27.548Z,1516697667.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:27.945Z,1516697667.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:28.348Z,1516697668.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:28.739Z,1516697668.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:29.142Z,1516697669.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:29.548Z,1516697669.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:29.951Z,1516697669.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:30.349Z,1516697670.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:30.748Z,1516697670.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:31.141Z,1516697671.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:31.552Z,1516697671.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:31.953Z,1516697671.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:32.353Z,1516697672.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:32.747Z,1516697672.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:33.148Z,1516697673.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:33.549Z,1516697673.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:33.949Z,1516697673.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:34.341Z,1516697674.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:34.720Z,1516697674.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:35.124Z,1516697675.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:35.550Z,1516697675.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:35.953Z,1516697675.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:36.352Z,1516697676.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:36.730Z,1516697676.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:37.137Z,1516697677.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:37.542Z,1516697677.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:37.942Z,1516697677.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:38.334Z,1516697678.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:38.732Z,1516697678.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:39.128Z,1516697679.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:39.546Z,1516697679.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:39.939Z,1516697679.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:40.343Z,1516697680.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:40.736Z,1516697680.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:41.128Z,1516697681.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:41.543Z,1516697681.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:41.942Z,1516697681.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:42.345Z,1516697682.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:42.735Z,1516697682.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:43.140Z,1516697683.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:43.541Z,1516697683.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:43.949Z,1516697683.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:44.342Z,1516697684.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:44.740Z,1516697684.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:45.127Z,1516697685.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:45.549Z,1516697685.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:45.950Z,1516697685.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:46.341Z,1516697686.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:46.729Z,1516697686.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:47.121Z,1516697687.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:47.544Z,1516697687.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:50.644Z,1516697690.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:50.774Z,1516697690.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:51.137Z,1516697691.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:51.519Z,1516697691.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:51.917Z,1516697691.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:52.315Z,1516697692.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:52.744Z,1516697692.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:53.119Z,1516697693.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:53.519Z,1516697693.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:53.918Z,1516697693.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:54.337Z,1516697694.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:54.713Z,1516697694.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:55.119Z,1516697695.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:55.513Z,1516697695.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:55.944Z,1516697695.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:56.322Z,1516697696.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:56.725Z,1516697696.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:57.114Z,1516697697.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:57.543Z,1516697697.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:57.924Z,1516697697.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:58.316Z,1516697698.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:58.725Z,1516697698.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:59.152Z,1516697699.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:59.525Z,1516697699.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:54:59.919Z,1516697699.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:00.316Z,1516697700.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:00.731Z,1516697700.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:01.128Z,1516697701.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:01.517Z,1516697701.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:01.922Z,1516697701.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:02.350Z,1516697702.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:02.729Z,1516697702.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:03.116Z,1516697703.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:03.529Z,1516697703.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:03.917Z,1516697703.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:04.321Z,1516697704.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:04.733Z,1516697704.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:05.132Z,1516697705.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:05.553Z,1516697705.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:05.936Z,1516697705.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:06.320Z,1516697706.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:06.723Z,1516697706.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:07.123Z,1516697707.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:07.525Z,1516697707.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:07.932Z,1516697707.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:08.332Z,1516697708.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:08.742Z,1516697708.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:09.125Z,1516697709.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:09.536Z,1516697709.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:09.927Z,1516697709.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:10.322Z,1516697710.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:10.730Z,1516697710.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:11.144Z,1516697711.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:11.536Z,1516697711.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:11.908Z,1516697711.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:12.307Z,1516697712.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:12.717Z,1516697712.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:13.116Z,1516697713.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:13.517Z,1516697713.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:13.918Z,1516697713.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:14.317Z,1516697714.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:14.723Z,1516697714.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:15.121Z,1516697715.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:15.516Z,1516697715.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:15.916Z,1516697715.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:16.313Z,1516697716.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:16.721Z,1516697716.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:17.125Z,1516697717.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:17.522Z,1516697717.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:17.912Z,1516697717.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:18.321Z,1516697718.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:18.716Z,1516697718.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:19.120Z,1516697719.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:19.517Z,1516697719.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:19.517Z,1516697719.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113 2018-01-23T08:55:19.517Z,1516697719.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:55:19.519Z,1516697719.519 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:19.519Z,1516697719.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113 2018-01-23T08:55:19.519Z,1516697719.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:55:19.521Z,1516697719.521 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:19.521Z,1516697719.521 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113 2018-01-23T08:55:19.521Z,1516697719.521 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:55:19.553Z,1516697719.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:55:19.553Z,1516697719.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:55:19.554Z,1516697719.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:55:19.951Z,1516697719.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:55:19.951Z,1516697719.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113 2018-01-23T08:55:19.952Z,1516697719.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:55:19.952Z,1516697719.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113 2018-01-23T08:55:19.952Z,1516697719.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:55:19.952Z,1516697719.952 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113 2018-01-23T08:55:20.325Z,1516697720.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:55:20.325Z,1516697720.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:55:20.325Z,1516697720.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:55:20.326Z,1516697720.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:55:20.326Z,1516697720.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:55:20.327Z,1516697720.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:55:20.327Z,1516697720.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:55:20.328Z,1516697720.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:55:20.328Z,1516697720.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:55:20.731Z,1516697720.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:55:20.732Z,1516697720.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:21.120Z,1516697721.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:55:21.121Z,1516697721.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:21.514Z,1516697721.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:55:21.515Z,1516697721.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:21.913Z,1516697721.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:55:21.914Z,1516697721.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:22.320Z,1516697722.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:55:22.321Z,1516697722.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:22.724Z,1516697722.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:55:22.725Z,1516697722.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:23.124Z,1516697723.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:55:23.125Z,1516697723.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:23.523Z,1516697723.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:55:23.524Z,1516697723.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:23.922Z,1516697723.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:55:23.923Z,1516697723.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:24.320Z,1516697724.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:55:24.321Z,1516697724.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:24.716Z,1516697724.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:55:24.717Z,1516697724.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:25.122Z,1516697725.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:55:25.123Z,1516697725.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:25.516Z,1516697725.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:55:25.517Z,1516697725.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:25.923Z,1516697725.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:55:25.924Z,1516697725.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:26.326Z,1516697726.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:55:26.327Z,1516697726.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:26.722Z,1516697726.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:55:26.723Z,1516697726.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:27.119Z,1516697727.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:55:27.120Z,1516697727.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:27.523Z,1516697727.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:55:27.524Z,1516697727.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:27.917Z,1516697727.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:55:27.918Z,1516697727.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:28.320Z,1516697728.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:55:28.321Z,1516697728.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:28.732Z,1516697728.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:55:28.733Z,1516697728.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:29.125Z,1516697729.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:55:29.126Z,1516697729.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:29.531Z,1516697729.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:55:29.532Z,1516697729.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:29.924Z,1516697729.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:55:29.925Z,1516697729.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:30.322Z,1516697730.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:55:30.324Z,1516697730.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:30.719Z,1516697730.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:55:30.720Z,1516697730.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:31.103Z,1516697731.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:55:31.104Z,1516697731.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:31.508Z,1516697731.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:55:31.509Z,1516697731.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:31.932Z,1516697731.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:55:31.933Z,1516697731.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:32.335Z,1516697732.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:55:32.336Z,1516697732.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:32.731Z,1516697732.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:55:32.732Z,1516697732.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:33.135Z,1516697733.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:55:33.136Z,1516697733.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:33.510Z,1516697733.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:55:33.511Z,1516697733.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:33.913Z,1516697733.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:55:33.914Z,1516697733.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:34.320Z,1516697734.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:55:34.321Z,1516697734.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:34.728Z,1516697734.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:55:34.729Z,1516697734.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:35.121Z,1516697735.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:55:35.122Z,1516697735.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:35.521Z,1516697735.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:55:35.522Z,1516697735.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:35.911Z,1516697735.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:55:35.912Z,1516697735.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:36.314Z,1516697736.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:55:36.315Z,1516697736.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:36.724Z,1516697736.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:55:36.725Z,1516697736.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:37.112Z,1516697737.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:55:37.113Z,1516697737.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:37.512Z,1516697737.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:55:37.513Z,1516697737.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:37.928Z,1516697737.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:55:37.929Z,1516697737.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:38.324Z,1516697738.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:55:38.325Z,1516697738.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:38.728Z,1516697738.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:55:38.729Z,1516697738.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:39.113Z,1516697739.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:55:39.114Z,1516697739.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:39.522Z,1516697739.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:39.914Z,1516697739.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:40.321Z,1516697740.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:40.722Z,1516697740.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:41.126Z,1516697741.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:41.526Z,1516697741.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:41.918Z,1516697741.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:42.317Z,1516697742.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:42.720Z,1516697742.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:43.121Z,1516697743.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:43.524Z,1516697743.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:43.937Z,1516697743.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:44.342Z,1516697744.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:44.738Z,1516697744.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:45.148Z,1516697745.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:45.585Z,1516697745.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:45.949Z,1516697745.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:46.334Z,1516697746.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:46.680Z,1516697746.680 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T08:55:46.680Z,1516697746.680 [NAL9602] Data Fault, FailCount= 1 2018-01-23T08:55:46.680Z,1516697746.680 [NAL9602](ERROR): Data Fault 2018-01-23T08:55:46.755Z,1516697746.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:46.795Z,1516697746.795 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T08:55:47.073Z,1516697747.073 [NAL9602](INFO): Powering down 2018-01-23T08:55:47.143Z,1516697747.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:47.524Z,1516697747.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:47.921Z,1516697747.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:47.933Z,1516697747.933 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T08:55:47.933Z,1516697747.933 [NAL9602] No Fault, FailCount= 1 2018-01-23T08:55:53.096Z,1516697753.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:53.230Z,1516697753.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:53.676Z,1516697753.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:54.033Z,1516697754.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:54.444Z,1516697754.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:54.858Z,1516697754.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:55.233Z,1516697755.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:55.626Z,1516697755.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:56.044Z,1516697756.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:56.434Z,1516697756.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:56.841Z,1516697756.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:57.207Z,1516697757.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:57.613Z,1516697757.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:58.009Z,1516697758.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:58.418Z,1516697758.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:58.811Z,1516697758.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:59.209Z,1516697759.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:55:59.620Z,1516697759.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:00.014Z,1516697760.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:00.401Z,1516697760.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:00.816Z,1516697760.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:01.198Z,1516697761.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:01.595Z,1516697761.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:01.997Z,1516697761.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:02.392Z,1516697762.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:02.916Z,1516697762.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:03.240Z,1516697763.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:03.605Z,1516697763.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:04.005Z,1516697764.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:04.407Z,1516697764.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:04.796Z,1516697764.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:05.202Z,1516697765.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:05.601Z,1516697765.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:06.008Z,1516697766.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:06.404Z,1516697766.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:06.803Z,1516697766.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:07.200Z,1516697767.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:07.613Z,1516697767.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:08.003Z,1516697768.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:08.400Z,1516697768.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:08.801Z,1516697768.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:09.204Z,1516697769.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:09.600Z,1516697769.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:10.001Z,1516697770.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:10.402Z,1516697770.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:10.803Z,1516697770.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:11.202Z,1516697771.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:11.605Z,1516697771.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:12.002Z,1516697772.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:12.402Z,1516697772.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:12.802Z,1516697772.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:13.200Z,1516697773.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:13.602Z,1516697773.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:14.002Z,1516697774.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:14.400Z,1516697774.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:14.802Z,1516697774.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:15.208Z,1516697775.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:15.600Z,1516697775.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:16.002Z,1516697776.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:16.403Z,1516697776.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:16.800Z,1516697776.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:17.164Z,1516697777.164 [NAL9602](INFO): Powering up NAL9602 2018-01-23T08:56:17.218Z,1516697777.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:17.607Z,1516697777.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:18.007Z,1516697778.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:18.402Z,1516697778.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:18.810Z,1516697778.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:19.203Z,1516697779.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:19.602Z,1516697779.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:20.002Z,1516697780.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:20.409Z,1516697780.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:20.808Z,1516697780.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:21.207Z,1516697781.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:21.602Z,1516697781.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:22.001Z,1516697782.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:22.404Z,1516697782.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:22.802Z,1516697782.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:23.202Z,1516697783.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:23.605Z,1516697783.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:24.002Z,1516697784.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:24.402Z,1516697784.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:24.802Z,1516697784.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:25.206Z,1516697785.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:25.602Z,1516697785.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:26.005Z,1516697786.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:26.400Z,1516697786.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:26.808Z,1516697786.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:27.207Z,1516697787.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:27.613Z,1516697787.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:27.964Z,1516697787.964 [NAL9602](INFO): NAL9602 initialized 2018-01-23T08:56:28.013Z,1516697788.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:28.407Z,1516697788.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:28.813Z,1516697788.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:29.216Z,1516697789.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:29.614Z,1516697789.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:30.007Z,1516697790.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:30.407Z,1516697790.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:30.808Z,1516697790.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:31.217Z,1516697791.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:31.618Z,1516697791.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:32.030Z,1516697792.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:32.407Z,1516697792.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:32.813Z,1516697792.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:33.210Z,1516697793.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:33.606Z,1516697793.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:34.012Z,1516697794.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:34.412Z,1516697794.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:34.810Z,1516697794.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:35.207Z,1516697795.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:35.606Z,1516697795.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:36.013Z,1516697796.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:36.412Z,1516697796.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:36.810Z,1516697796.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:37.240Z,1516697797.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:37.617Z,1516697797.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:38.015Z,1516697798.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:38.405Z,1516697798.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:38.815Z,1516697798.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:39.206Z,1516697799.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:39.603Z,1516697799.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:40.026Z,1516697800.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:40.418Z,1516697800.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:40.814Z,1516697800.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:41.216Z,1516697801.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:41.605Z,1516697801.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:42.005Z,1516697802.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:42.414Z,1516697802.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:42.802Z,1516697802.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:43.213Z,1516697803.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:43.621Z,1516697803.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:44.014Z,1516697804.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:44.405Z,1516697804.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:44.805Z,1516697804.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:45.208Z,1516697805.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:45.609Z,1516697805.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:46.017Z,1516697806.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:46.418Z,1516697806.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:46.815Z,1516697806.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:47.211Z,1516697807.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:47.614Z,1516697807.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:48.008Z,1516697808.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:51.103Z,1516697811.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:51.249Z,1516697811.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:51.602Z,1516697811.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:52.002Z,1516697812.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:52.374Z,1516697812.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:52.766Z,1516697812.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:53.176Z,1516697813.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:53.566Z,1516697813.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:53.973Z,1516697813.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:54.377Z,1516697814.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:54.777Z,1516697814.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:55.170Z,1516697815.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:55.567Z,1516697815.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:55.966Z,1516697815.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:56.369Z,1516697816.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:56.771Z,1516697816.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:57.177Z,1516697817.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:57.578Z,1516697817.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:57.977Z,1516697817.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:58.368Z,1516697818.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:58.781Z,1516697818.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:59.172Z,1516697819.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:59.567Z,1516697819.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:56:59.977Z,1516697819.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:00.380Z,1516697820.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:00.785Z,1516697820.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:01.169Z,1516697821.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:01.567Z,1516697821.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:01.968Z,1516697821.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:02.377Z,1516697822.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:02.767Z,1516697822.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:03.185Z,1516697823.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:03.581Z,1516697823.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:03.977Z,1516697823.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:04.368Z,1516697824.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:04.775Z,1516697824.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:05.168Z,1516697825.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:05.569Z,1516697825.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:05.977Z,1516697825.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:06.382Z,1516697826.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:06.785Z,1516697826.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:07.172Z,1516697827.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:07.580Z,1516697827.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:07.976Z,1516697827.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:08.378Z,1516697828.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:08.777Z,1516697828.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:09.181Z,1516697829.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:09.582Z,1516697829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:09.981Z,1516697829.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:10.377Z,1516697830.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:10.777Z,1516697830.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:11.181Z,1516697831.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:11.570Z,1516697831.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:11.980Z,1516697831.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:12.387Z,1516697832.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:12.785Z,1516697832.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:13.176Z,1516697833.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:13.571Z,1516697833.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:13.971Z,1516697833.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:14.376Z,1516697834.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:14.771Z,1516697834.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:15.182Z,1516697835.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:15.583Z,1516697835.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:15.984Z,1516697835.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:16.380Z,1516697836.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:16.781Z,1516697836.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:17.171Z,1516697837.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:17.569Z,1516697837.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:17.979Z,1516697837.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:18.394Z,1516697838.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:18.781Z,1516697838.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:19.179Z,1516697839.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:19.576Z,1516697839.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:19.975Z,1516697839.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:20.372Z,1516697840.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:20.759Z,1516697840.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:21.186Z,1516697841.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:21.589Z,1516697841.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:21.989Z,1516697841.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:22.364Z,1516697842.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:22.789Z,1516697842.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:23.167Z,1516697843.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:23.565Z,1516697843.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:23.974Z,1516697843.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:24.400Z,1516697844.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:24.770Z,1516697844.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:25.167Z,1516697845.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:25.574Z,1516697845.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:25.968Z,1516697845.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:26.368Z,1516697846.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:26.774Z,1516697846.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:27.174Z,1516697847.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:27.578Z,1516697847.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:27.980Z,1516697847.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:28.364Z,1516697848.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:28.766Z,1516697848.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:29.172Z,1516697849.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:29.565Z,1516697849.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:29.970Z,1516697849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:30.373Z,1516697850.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:30.770Z,1516697850.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:31.166Z,1516697851.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:31.576Z,1516697851.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:31.977Z,1516697851.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:32.386Z,1516697852.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:32.778Z,1516697852.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:33.170Z,1516697853.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:33.575Z,1516697853.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:33.979Z,1516697853.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:34.389Z,1516697854.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:34.778Z,1516697854.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:35.179Z,1516697855.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:35.575Z,1516697855.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:35.989Z,1516697855.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:36.398Z,1516697856.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:36.782Z,1516697856.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:37.172Z,1516697857.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:37.576Z,1516697857.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:37.982Z,1516697857.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:38.382Z,1516697858.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:38.781Z,1516697858.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:39.174Z,1516697859.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:39.577Z,1516697859.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:39.983Z,1516697859.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:40.388Z,1516697860.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:40.782Z,1516697860.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:41.173Z,1516697861.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:41.557Z,1516697861.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:41.986Z,1516697861.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:42.388Z,1516697862.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:42.785Z,1516697862.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:43.188Z,1516697863.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:43.568Z,1516697863.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:43.974Z,1516697863.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:44.395Z,1516697864.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:44.774Z,1516697864.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:45.168Z,1516697865.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:45.577Z,1516697865.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:45.982Z,1516697865.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:46.379Z,1516697866.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:46.804Z,1516697866.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:46.806Z,1516697866.806 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T08:57:46.807Z,1516697866.807 [Default:CheckIn:C.Wait] Stopped 2018-01-23T08:57:46.807Z,1516697866.807 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T08:57:46.807Z,1516697866.807 [Default:CheckIn:D] Running Loop=1 2018-01-23T08:57:47.174Z,1516697867.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:47.181Z,1516697867.181 [Default:CheckIn:D] Stopped 2018-01-23T08:57:47.181Z,1516697867.181 [Default:CheckIn:E] Running Loop=1 2018-01-23T08:57:47.580Z,1516697867.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:47.583Z,1516697867.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 339.918685 min 2018-01-23T08:57:47.583Z,1516697867.583 [Default:CheckIn:E] Stopped 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn] Stopped 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn](INFO): Running loop #34 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn] Running Loop=34 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T08:57:47.584Z,1516697867.584 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T08:57:47.978Z,1516697867.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:48.389Z,1516697868.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:51.473Z,1516697871.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:51.617Z,1516697871.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:51.941Z,1516697871.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:52.345Z,1516697872.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:52.737Z,1516697872.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:53.147Z,1516697873.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:53.545Z,1516697873.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:53.970Z,1516697873.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:54.339Z,1516697874.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:54.740Z,1516697874.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:55.145Z,1516697875.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:55.541Z,1516697875.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:55.940Z,1516697875.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:56.345Z,1516697876.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:56.746Z,1516697876.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:57.145Z,1516697877.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:57.538Z,1516697877.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:57.938Z,1516697877.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:58.340Z,1516697878.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:58.739Z,1516697878.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:59.145Z,1516697879.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:59.545Z,1516697879.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:57:59.946Z,1516697879.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:00.339Z,1516697880.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:00.740Z,1516697880.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:01.143Z,1516697881.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:01.545Z,1516697881.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:01.940Z,1516697881.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:02.352Z,1516697882.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:02.757Z,1516697882.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:03.149Z,1516697883.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:03.538Z,1516697883.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:03.942Z,1516697883.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:04.340Z,1516697884.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:04.741Z,1516697884.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:05.149Z,1516697885.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:05.553Z,1516697885.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:05.949Z,1516697885.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:06.342Z,1516697886.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:06.750Z,1516697886.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:07.145Z,1516697887.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:07.542Z,1516697887.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:07.950Z,1516697887.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:08.354Z,1516697888.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:08.757Z,1516697888.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:09.149Z,1516697889.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:09.547Z,1516697889.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:09.947Z,1516697889.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:10.351Z,1516697890.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:10.741Z,1516697890.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:11.154Z,1516697891.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:11.562Z,1516697891.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:11.954Z,1516697891.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:12.351Z,1516697892.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:12.749Z,1516697892.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:13.137Z,1516697893.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:13.548Z,1516697893.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:13.960Z,1516697893.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:14.352Z,1516697894.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:14.763Z,1516697894.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:15.162Z,1516697895.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:15.529Z,1516697895.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:15.937Z,1516697895.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:16.340Z,1516697896.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:16.737Z,1516697896.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:17.166Z,1516697897.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:17.572Z,1516697897.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:17.970Z,1516697897.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:18.344Z,1516697898.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:18.741Z,1516697898.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:19.139Z,1516697899.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:19.541Z,1516697899.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:19.949Z,1516697899.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:20.350Z,1516697900.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:20.350Z,1516697900.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114 2018-01-23T08:58:20.350Z,1516697900.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T08:58:20.352Z,1516697900.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:20.352Z,1516697900.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114 2018-01-23T08:58:20.352Z,1516697900.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T08:58:20.353Z,1516697900.353 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:20.354Z,1516697900.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114 2018-01-23T08:58:20.354Z,1516697900.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T08:58:20.374Z,1516697900.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T08:58:20.374Z,1516697900.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T08:58:20.374Z,1516697900.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T08:58:20.784Z,1516697900.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T08:58:20.784Z,1516697900.784 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114 2018-01-23T08:58:20.784Z,1516697900.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T08:58:20.784Z,1516697900.784 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114 2018-01-23T08:58:20.785Z,1516697900.785 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T08:58:20.785Z,1516697900.785 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114 2018-01-23T08:58:21.168Z,1516697901.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T08:58:21.168Z,1516697901.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:58:21.168Z,1516697901.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:58:21.169Z,1516697901.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T08:58:21.169Z,1516697901.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:58:21.169Z,1516697901.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:58:21.170Z,1516697901.170 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T08:58:21.170Z,1516697901.170 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T08:58:21.171Z,1516697901.171 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T08:58:21.552Z,1516697901.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T08:58:21.552Z,1516697901.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:21.951Z,1516697901.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T08:58:21.952Z,1516697901.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:22.345Z,1516697902.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T08:58:22.346Z,1516697902.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:22.732Z,1516697902.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T08:58:22.733Z,1516697902.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:23.160Z,1516697903.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T08:58:23.161Z,1516697903.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:23.559Z,1516697903.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T08:58:23.560Z,1516697903.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:23.959Z,1516697903.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T08:58:23.960Z,1516697903.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:24.364Z,1516697904.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T08:58:24.365Z,1516697904.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:24.737Z,1516697904.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T08:58:24.738Z,1516697904.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:25.140Z,1516697905.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T08:58:25.141Z,1516697905.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:25.542Z,1516697905.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T08:58:25.543Z,1516697905.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:25.949Z,1516697905.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T08:58:25.950Z,1516697905.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:26.357Z,1516697906.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T08:58:26.358Z,1516697906.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:26.751Z,1516697906.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T08:58:26.752Z,1516697906.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:27.158Z,1516697907.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T08:58:27.159Z,1516697907.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:27.548Z,1516697907.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T08:58:27.549Z,1516697907.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:27.946Z,1516697907.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T08:58:27.951Z,1516697907.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:28.345Z,1516697908.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T08:58:28.346Z,1516697908.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:28.747Z,1516697908.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T08:58:28.748Z,1516697908.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:29.161Z,1516697909.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T08:58:29.161Z,1516697909.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:29.557Z,1516697909.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T08:58:29.558Z,1516697909.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:29.950Z,1516697909.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T08:58:29.951Z,1516697909.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:30.348Z,1516697910.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T08:58:30.349Z,1516697910.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:30.749Z,1516697910.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T08:58:30.750Z,1516697910.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:31.148Z,1516697911.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T08:58:31.149Z,1516697911.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:31.548Z,1516697911.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T08:58:31.549Z,1516697911.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:31.933Z,1516697911.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T08:58:31.934Z,1516697911.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:32.360Z,1516697912.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T08:58:32.361Z,1516697912.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:32.772Z,1516697912.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T08:58:32.773Z,1516697912.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:33.153Z,1516697913.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T08:58:33.154Z,1516697913.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:33.569Z,1516697913.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T08:58:33.570Z,1516697913.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:33.971Z,1516697913.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T08:58:33.972Z,1516697913.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:34.343Z,1516697914.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T08:58:34.344Z,1516697914.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:34.740Z,1516697914.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T08:58:34.741Z,1516697914.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:35.170Z,1516697915.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T08:58:35.172Z,1516697915.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:35.549Z,1516697915.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T08:58:35.550Z,1516697915.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:35.954Z,1516697915.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T08:58:35.971Z,1516697915.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:36.338Z,1516697916.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T08:58:36.339Z,1516697916.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:36.744Z,1516697916.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T08:58:36.745Z,1516697916.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:37.142Z,1516697917.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T08:58:37.144Z,1516697917.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:37.540Z,1516697917.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T08:58:37.541Z,1516697917.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:37.939Z,1516697917.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T08:58:37.940Z,1516697917.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:38.348Z,1516697918.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T08:58:38.349Z,1516697918.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:38.745Z,1516697918.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T08:58:38.746Z,1516697918.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:39.152Z,1516697919.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T08:58:39.153Z,1516697919.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:39.543Z,1516697919.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T08:58:39.544Z,1516697919.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:39.944Z,1516697919.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T08:58:39.945Z,1516697919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:40.340Z,1516697920.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T08:58:40.341Z,1516697920.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:40.745Z,1516697920.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:41.149Z,1516697921.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:41.549Z,1516697921.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:41.946Z,1516697921.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:42.340Z,1516697922.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:42.740Z,1516697922.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:43.139Z,1516697923.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:43.541Z,1516697923.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:43.939Z,1516697923.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:44.346Z,1516697924.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:44.746Z,1516697924.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:45.145Z,1516697925.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:45.539Z,1516697925.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:45.939Z,1516697925.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:46.340Z,1516697926.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:46.745Z,1516697926.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:47.149Z,1516697927.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:47.545Z,1516697927.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:47.946Z,1516697927.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:48.339Z,1516697928.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:48.740Z,1516697928.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:51.830Z,1516697931.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:51.953Z,1516697931.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:52.305Z,1516697932.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:52.714Z,1516697932.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:53.108Z,1516697933.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:53.502Z,1516697933.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:53.903Z,1516697933.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:54.299Z,1516697934.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:54.709Z,1516697934.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:55.113Z,1516697935.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:55.519Z,1516697935.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:55.908Z,1516697935.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:56.313Z,1516697936.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:56.703Z,1516697936.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:57.113Z,1516697937.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:57.512Z,1516697937.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:57.925Z,1516697937.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:58.301Z,1516697938.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x62112 got:0x7106 2018-01-23T08:58:58.343Z,1516697938.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:58.705Z,1516697938.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:59.108Z,1516697939.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:59.515Z,1516697939.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:58:59.915Z,1516697939.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:00.311Z,1516697940.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:00.705Z,1516697940.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:01.117Z,1516697941.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:01.514Z,1516697941.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:01.923Z,1516697941.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:02.303Z,1516697942.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:02.704Z,1516697942.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:03.122Z,1516697943.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:03.517Z,1516697943.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:03.917Z,1516697943.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:04.312Z,1516697944.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:04.711Z,1516697944.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:05.116Z,1516697945.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:05.514Z,1516697945.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:05.925Z,1516697945.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:06.310Z,1516697946.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:06.718Z,1516697946.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:07.114Z,1516697947.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:07.522Z,1516697947.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:07.925Z,1516697947.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:08.315Z,1516697948.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:08.694Z,1516697948.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:09.121Z,1516697949.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:09.528Z,1516697949.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:09.920Z,1516697949.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:10.318Z,1516697950.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:10.723Z,1516697950.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:11.102Z,1516697951.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:11.525Z,1516697951.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:11.922Z,1516697951.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:12.314Z,1516697952.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:12.696Z,1516697952.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:13.133Z,1516697953.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:13.528Z,1516697953.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:13.929Z,1516697953.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:14.296Z,1516697954.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:14.695Z,1516697954.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:15.106Z,1516697955.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:15.504Z,1516697955.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:15.905Z,1516697955.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:16.297Z,1516697956.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:16.709Z,1516697956.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:17.109Z,1516697957.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:17.510Z,1516697957.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:17.916Z,1516697957.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:18.304Z,1516697958.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:18.709Z,1516697958.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:19.105Z,1516697959.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:19.510Z,1516697959.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:19.909Z,1516697959.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:20.297Z,1516697960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:20.705Z,1516697960.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:21.106Z,1516697961.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:21.512Z,1516697961.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:21.909Z,1516697961.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:22.297Z,1516697962.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:22.700Z,1516697962.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:23.113Z,1516697963.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:23.509Z,1516697963.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:23.912Z,1516697963.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:24.304Z,1516697964.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:24.697Z,1516697964.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:25.106Z,1516697965.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:25.509Z,1516697965.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:25.905Z,1516697965.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:26.296Z,1516697966.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:26.701Z,1516697966.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:27.105Z,1516697967.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:27.509Z,1516697967.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:27.936Z,1516697967.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:28.304Z,1516697968.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:28.698Z,1516697968.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:29.105Z,1516697969.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:29.512Z,1516697969.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:29.913Z,1516697969.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:30.305Z,1516697970.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:30.697Z,1516697970.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:31.104Z,1516697971.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:31.512Z,1516697971.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:31.913Z,1516697971.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:32.306Z,1516697972.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:32.698Z,1516697972.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:33.106Z,1516697973.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:33.497Z,1516697973.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:33.897Z,1516697973.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:34.312Z,1516697974.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:34.710Z,1516697974.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:35.106Z,1516697975.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:35.504Z,1516697975.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:35.897Z,1516697975.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:36.306Z,1516697976.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:36.702Z,1516697976.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:37.104Z,1516697977.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:37.511Z,1516697977.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:37.915Z,1516697977.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:38.309Z,1516697978.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:38.696Z,1516697978.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:39.108Z,1516697979.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:39.499Z,1516697979.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:39.898Z,1516697979.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:40.317Z,1516697980.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:40.713Z,1516697980.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:41.108Z,1516697981.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:41.497Z,1516697981.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:41.908Z,1516697981.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:42.304Z,1516697982.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:42.699Z,1516697982.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:43.108Z,1516697983.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:43.508Z,1516697983.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:43.910Z,1516697983.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:44.315Z,1516697984.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:44.704Z,1516697984.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:45.104Z,1516697985.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:45.508Z,1516697985.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:45.909Z,1516697985.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:46.310Z,1516697986.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:46.709Z,1516697986.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:47.108Z,1516697987.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:47.504Z,1516697987.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:47.909Z,1516697987.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:48.293Z,1516697988.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:48.704Z,1516697988.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:49.116Z,1516697989.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:52.217Z,1516697992.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:52.377Z,1516697992.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:52.707Z,1516697992.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:53.079Z,1516697993.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:53.484Z,1516697993.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:53.883Z,1516697993.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:54.289Z,1516697994.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:54.705Z,1516697994.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:55.090Z,1516697995.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:55.483Z,1516697995.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:55.884Z,1516697995.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:56.283Z,1516697996.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:56.690Z,1516697996.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:57.083Z,1516697997.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:57.513Z,1516697997.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:57.893Z,1516697997.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:58.286Z,1516697998.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:58.682Z,1516697998.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:59.083Z,1516697999.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:59.482Z,1516697999.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T08:59:59.882Z,1516697999.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:00.286Z,1516698000.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:00.698Z,1516698000.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:01.090Z,1516698001.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:01.483Z,1516698001.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:01.883Z,1516698001.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:02.282Z,1516698002.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:02.684Z,1516698002.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:03.089Z,1516698003.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:03.493Z,1516698003.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:03.893Z,1516698003.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:04.293Z,1516698004.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:04.687Z,1516698004.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:05.084Z,1516698005.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:05.489Z,1516698005.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:05.883Z,1516698005.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:06.296Z,1516698006.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:06.694Z,1516698006.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:07.093Z,1516698007.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:07.487Z,1516698007.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:07.883Z,1516698007.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:08.282Z,1516698008.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:08.684Z,1516698008.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:09.087Z,1516698009.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:09.493Z,1516698009.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:09.893Z,1516698009.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:10.290Z,1516698010.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:10.683Z,1516698010.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:11.084Z,1516698011.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:11.486Z,1516698011.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:11.884Z,1516698011.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:12.296Z,1516698012.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:12.694Z,1516698012.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:13.102Z,1516698013.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:13.489Z,1516698013.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:13.889Z,1516698013.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:14.286Z,1516698014.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:14.686Z,1516698014.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:15.087Z,1516698015.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:15.501Z,1516698015.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:15.895Z,1516698015.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:16.294Z,1516698016.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:16.685Z,1516698016.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:17.089Z,1516698017.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:17.489Z,1516698017.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:17.892Z,1516698017.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:18.296Z,1516698018.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:18.697Z,1516698018.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:19.093Z,1516698019.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:19.486Z,1516698019.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:19.885Z,1516698019.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:20.285Z,1516698020.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:20.685Z,1516698020.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:21.089Z,1516698021.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:21.494Z,1516698021.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:21.900Z,1516698021.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:22.295Z,1516698022.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:22.697Z,1516698022.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:23.083Z,1516698023.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:23.486Z,1516698023.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:23.883Z,1516698023.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:24.293Z,1516698024.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:24.698Z,1516698024.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:25.101Z,1516698025.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:25.487Z,1516698025.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:25.893Z,1516698025.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:26.285Z,1516698026.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:26.688Z,1516698026.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:27.087Z,1516698027.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:27.493Z,1516698027.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:27.896Z,1516698027.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:28.293Z,1516698028.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:28.694Z,1516698028.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:29.083Z,1516698029.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:29.485Z,1516698029.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:29.885Z,1516698029.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:30.294Z,1516698030.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:30.693Z,1516698030.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:31.101Z,1516698031.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:31.493Z,1516698031.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:31.887Z,1516698031.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:32.285Z,1516698032.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:32.688Z,1516698032.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:33.093Z,1516698033.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:33.493Z,1516698033.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:33.900Z,1516698033.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:34.293Z,1516698034.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:34.685Z,1516698034.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:35.091Z,1516698035.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:35.488Z,1516698035.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:35.884Z,1516698035.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:36.297Z,1516698036.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:36.693Z,1516698036.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:37.101Z,1516698037.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:37.493Z,1516698037.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:37.887Z,1516698037.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:38.285Z,1516698038.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:38.684Z,1516698038.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:39.087Z,1516698039.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:39.493Z,1516698039.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:39.896Z,1516698039.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:40.293Z,1516698040.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:40.685Z,1516698040.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:41.083Z,1516698041.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:41.494Z,1516698041.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:41.885Z,1516698041.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:42.294Z,1516698042.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:42.693Z,1516698042.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:43.101Z,1516698043.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:43.487Z,1516698043.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:43.899Z,1516698043.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:44.298Z,1516698044.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:44.701Z,1516698044.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:45.114Z,1516698045.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:45.545Z,1516698045.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:45.920Z,1516698045.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:46.302Z,1516698046.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:46.685Z,1516698046.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:47.114Z,1516698047.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:47.481Z,1516698047.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:47.929Z,1516698047.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:48.330Z,1516698048.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:48.709Z,1516698048.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:49.116Z,1516698049.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:49.524Z,1516698049.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:56.224Z,1516698056.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:56.388Z,1516698056.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:56.757Z,1516698056.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:57.157Z,1516698057.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:57.550Z,1516698057.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:57.957Z,1516698057.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:58.355Z,1516698058.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:58.758Z,1516698058.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:59.129Z,1516698059.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:59.549Z,1516698059.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:00:59.949Z,1516698059.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:00.339Z,1516698060.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:00.734Z,1516698060.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:01.132Z,1516698061.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:01.540Z,1516698061.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:01.942Z,1516698061.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:02.340Z,1516698062.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:02.753Z,1516698062.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:03.142Z,1516698063.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:03.538Z,1516698063.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:03.939Z,1516698063.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:04.337Z,1516698064.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:04.734Z,1516698064.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:05.139Z,1516698065.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:05.539Z,1516698065.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:05.945Z,1516698065.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:06.338Z,1516698066.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:06.735Z,1516698066.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:07.137Z,1516698067.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:07.531Z,1516698067.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:07.933Z,1516698067.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:08.345Z,1516698068.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:08.750Z,1516698068.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:09.142Z,1516698069.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:09.533Z,1516698069.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:09.930Z,1516698069.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:10.335Z,1516698070.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:10.735Z,1516698070.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:11.133Z,1516698071.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:11.539Z,1516698071.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:11.949Z,1516698071.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:12.342Z,1516698072.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:12.737Z,1516698072.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:13.139Z,1516698073.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:13.540Z,1516698073.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:13.940Z,1516698073.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:14.348Z,1516698074.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:14.743Z,1516698074.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:15.145Z,1516698075.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:15.539Z,1516698075.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:15.940Z,1516698075.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:16.317Z,1516698076.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:16.720Z,1516698076.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:17.120Z,1516698077.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:17.550Z,1516698077.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:17.951Z,1516698077.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:18.360Z,1516698078.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:18.720Z,1516698078.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:19.133Z,1516698079.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:19.528Z,1516698079.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:19.928Z,1516698079.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:20.334Z,1516698080.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:20.760Z,1516698080.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:21.158Z,1516698081.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:21.527Z,1516698081.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:21.527Z,1516698081.527 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115 2018-01-23T09:01:21.527Z,1516698081.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:01:21.529Z,1516698081.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:21.529Z,1516698081.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115 2018-01-23T09:01:21.529Z,1516698081.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:01:21.531Z,1516698081.531 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:21.531Z,1516698081.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115 2018-01-23T09:01:21.531Z,1516698081.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:01:21.559Z,1516698081.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:01:21.559Z,1516698081.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:01:21.560Z,1516698081.560 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:01:21.953Z,1516698081.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:01:21.953Z,1516698081.953 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115 2018-01-23T09:01:21.953Z,1516698081.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:01:21.953Z,1516698081.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115 2018-01-23T09:01:21.954Z,1516698081.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:01:21.954Z,1516698081.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115 2018-01-23T09:01:22.326Z,1516698082.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:01:22.326Z,1516698082.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:01:22.326Z,1516698082.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:01:22.327Z,1516698082.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:01:22.327Z,1516698082.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:01:22.328Z,1516698082.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:01:22.328Z,1516698082.328 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:01:22.328Z,1516698082.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:01:22.329Z,1516698082.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:01:22.735Z,1516698082.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:01:22.736Z,1516698082.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:23.136Z,1516698083.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:01:23.137Z,1516698083.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:23.537Z,1516698083.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:01:23.538Z,1516698083.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:23.944Z,1516698083.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:01:23.945Z,1516698083.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:24.338Z,1516698084.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:01:24.339Z,1516698084.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:24.732Z,1516698084.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:01:24.733Z,1516698084.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:25.132Z,1516698085.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:01:25.133Z,1516698085.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:25.536Z,1516698085.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:01:25.537Z,1516698085.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:25.934Z,1516698085.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:01:25.935Z,1516698085.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:26.337Z,1516698086.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:01:26.338Z,1516698086.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:26.751Z,1516698086.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:01:26.752Z,1516698086.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:27.141Z,1516698087.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:01:27.142Z,1516698087.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:27.531Z,1516698087.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:01:27.532Z,1516698087.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:27.939Z,1516698087.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:01:27.940Z,1516698087.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:28.341Z,1516698088.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:01:28.342Z,1516698088.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:28.756Z,1516698088.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:01:28.757Z,1516698088.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:29.153Z,1516698089.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:01:29.154Z,1516698089.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:29.523Z,1516698089.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:01:29.524Z,1516698089.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:29.924Z,1516698089.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:01:29.925Z,1516698089.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:30.354Z,1516698090.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:01:30.359Z,1516698090.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:30.729Z,1516698090.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:01:30.730Z,1516698090.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:31.133Z,1516698091.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:01:31.134Z,1516698091.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:31.530Z,1516698091.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:01:31.531Z,1516698091.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:31.937Z,1516698091.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:01:31.938Z,1516698091.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:32.367Z,1516698092.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:01:32.368Z,1516698092.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:32.738Z,1516698092.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:01:32.739Z,1516698092.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:33.150Z,1516698093.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:01:33.171Z,1516698093.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:33.530Z,1516698093.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:01:33.532Z,1516698093.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:33.928Z,1516698093.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:01:33.929Z,1516698093.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:34.335Z,1516698094.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:01:34.336Z,1516698094.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:34.734Z,1516698094.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:01:34.735Z,1516698094.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:35.147Z,1516698095.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:01:35.148Z,1516698095.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:35.524Z,1516698095.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:01:35.525Z,1516698095.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:35.921Z,1516698095.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:01:35.922Z,1516698095.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:36.357Z,1516698096.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:01:36.357Z,1516698096.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:36.751Z,1516698096.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:01:36.752Z,1516698096.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:37.134Z,1516698097.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:01:37.151Z,1516698097.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:37.544Z,1516698097.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:01:37.545Z,1516698097.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:37.936Z,1516698097.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:01:37.937Z,1516698097.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:38.342Z,1516698098.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:01:38.363Z,1516698098.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:38.740Z,1516698098.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:01:38.741Z,1516698098.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:39.138Z,1516698099.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:01:39.139Z,1516698099.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:39.531Z,1516698099.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:01:39.532Z,1516698099.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:39.931Z,1516698099.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:01:39.932Z,1516698099.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:40.337Z,1516698100.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:01:40.338Z,1516698100.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:40.744Z,1516698100.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:01:40.745Z,1516698100.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:41.142Z,1516698101.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:01:41.143Z,1516698101.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:41.530Z,1516698101.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:41.940Z,1516698101.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:42.340Z,1516698102.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:42.749Z,1516698102.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:43.137Z,1516698103.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:43.528Z,1516698103.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:43.928Z,1516698103.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:44.337Z,1516698104.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:44.744Z,1516698104.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:45.138Z,1516698105.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:45.530Z,1516698105.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:45.932Z,1516698105.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:46.341Z,1516698106.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:46.746Z,1516698106.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:47.138Z,1516698107.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:47.535Z,1516698107.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:47.935Z,1516698107.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:48.338Z,1516698108.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:48.741Z,1516698108.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:49.138Z,1516698109.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:49.531Z,1516698109.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:52.629Z,1516698112.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:52.777Z,1516698112.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:53.102Z,1516698113.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:53.527Z,1516698113.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:53.901Z,1516698113.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:54.301Z,1516698114.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:54.695Z,1516698114.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:55.101Z,1516698115.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:55.525Z,1516698115.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:55.925Z,1516698115.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:56.301Z,1516698116.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:56.701Z,1516698116.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:57.096Z,1516698117.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:57.492Z,1516698117.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:57.896Z,1516698117.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:58.295Z,1516698118.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:58.705Z,1516698118.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:59.110Z,1516698119.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:59.508Z,1516698119.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:01:59.905Z,1516698119.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:00.294Z,1516698120.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:00.708Z,1516698120.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:01.094Z,1516698121.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:01.531Z,1516698121.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:01.906Z,1516698121.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:02.306Z,1516698122.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:02.695Z,1516698122.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:03.099Z,1516698123.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:03.505Z,1516698123.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:03.897Z,1516698123.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:04.304Z,1516698124.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:04.705Z,1516698124.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:05.109Z,1516698125.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:05.506Z,1516698125.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:05.905Z,1516698125.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:06.299Z,1516698126.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:06.699Z,1516698126.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:07.098Z,1516698127.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:07.513Z,1516698127.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:07.921Z,1516698127.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:08.312Z,1516698128.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:08.704Z,1516698128.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:09.107Z,1516698129.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:09.504Z,1516698129.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:09.908Z,1516698129.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:10.305Z,1516698130.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:10.716Z,1516698130.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:11.116Z,1516698131.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:11.512Z,1516698131.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:11.898Z,1516698131.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:12.306Z,1516698132.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:12.710Z,1516698132.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:13.101Z,1516698133.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:13.517Z,1516698133.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:13.918Z,1516698133.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:14.307Z,1516698134.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:14.705Z,1516698134.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:15.104Z,1516698135.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:15.507Z,1516698135.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:15.897Z,1516698135.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:16.289Z,1516698136.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:16.717Z,1516698136.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:17.121Z,1516698137.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:17.514Z,1516698137.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:17.897Z,1516698137.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:18.300Z,1516698138.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:18.696Z,1516698138.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:19.094Z,1516698139.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:19.498Z,1516698139.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:19.905Z,1516698139.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:20.327Z,1516698140.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:20.700Z,1516698140.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:21.094Z,1516698141.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:21.494Z,1516698141.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:21.900Z,1516698141.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:22.299Z,1516698142.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:22.705Z,1516698142.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:23.106Z,1516698143.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:23.501Z,1516698143.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:23.899Z,1516698143.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:24.294Z,1516698144.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:24.705Z,1516698144.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:25.095Z,1516698145.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:25.501Z,1516698145.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:25.902Z,1516698145.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:26.302Z,1516698146.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:26.695Z,1516698146.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:27.095Z,1516698147.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:27.499Z,1516698147.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:27.897Z,1516698147.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:28.299Z,1516698148.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:28.705Z,1516698148.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:29.102Z,1516698149.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:29.501Z,1516698149.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:29.895Z,1516698149.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:30.294Z,1516698150.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:30.696Z,1516698150.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:31.099Z,1516698151.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:31.505Z,1516698151.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:31.905Z,1516698151.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:32.305Z,1516698152.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:32.701Z,1516698152.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:33.096Z,1516698153.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:33.501Z,1516698153.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:33.897Z,1516698153.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:34.296Z,1516698154.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:34.705Z,1516698154.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:35.102Z,1516698155.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:35.501Z,1516698155.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:35.899Z,1516698155.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:36.295Z,1516698156.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:36.696Z,1516698156.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:37.099Z,1516698157.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:37.514Z,1516698157.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:37.905Z,1516698157.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:38.305Z,1516698158.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:38.694Z,1516698158.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:39.095Z,1516698159.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:39.501Z,1516698159.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:39.902Z,1516698159.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:40.297Z,1516698160.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:40.713Z,1516698160.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:41.117Z,1516698161.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:41.506Z,1516698161.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:41.905Z,1516698161.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:42.303Z,1516698162.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:42.700Z,1516698162.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:43.105Z,1516698163.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:43.506Z,1516698163.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:43.912Z,1516698163.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:44.317Z,1516698164.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:44.701Z,1516698164.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:45.098Z,1516698165.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:45.505Z,1516698165.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:45.913Z,1516698165.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:46.300Z,1516698166.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:46.714Z,1516698166.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:47.113Z,1516698167.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:47.514Z,1516698167.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:47.904Z,1516698167.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:47.907Z,1516698167.907 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T08:57:47.6Z 2018-01-23T09:02:47.908Z,1516698167.908 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:02:47.908Z,1516698167.908 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:02:48.304Z,1516698168.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:48.816Z,1516698168.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:49.105Z,1516698169.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:52.299Z,1516698172.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:52.353Z,1516698172.353 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0136.lzma 2018-01-23T09:02:52.430Z,1516698172.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:52.770Z,1516698172.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:53.121Z,1516698173.121 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0136.lzma.bak 2018-01-23T09:02:53.121Z,1516698173.121 [DataOverHttps](INFO): SBD MOMSN=7755319 2018-01-23T09:02:53.173Z,1516698173.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:53.801Z,1516698173.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:53.962Z,1516698173.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:57.070Z,1516698177.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:57.197Z,1516698177.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:57.593Z,1516698177.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:57.972Z,1516698177.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:58.362Z,1516698178.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:02:58.774Z,1516698178.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:01.859Z,1516698181.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:01.939Z,1516698181.939 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0137.lzma 2018-01-23T09:03:02.006Z,1516698182.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:02.350Z,1516698182.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:02.692Z,1516698182.692 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0137.lzma.bak 2018-01-23T09:03:02.692Z,1516698182.692 [DataOverHttps](INFO): SBD MOMSN=7755321 2018-01-23T09:03:02.764Z,1516698182.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:03.364Z,1516698183.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:03.367Z,1516698183.367 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:03:03.367Z,1516698183.367 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:03:03.367Z,1516698183.367 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:03:03.532Z,1516698183.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:06.738Z,1516698186.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:06.866Z,1516698186.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:07.231Z,1516698187.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:07.654Z,1516698187.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:08.031Z,1516698188.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:08.426Z,1516698188.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:08.840Z,1516698188.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:09.236Z,1516698189.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:09.646Z,1516698189.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:10.041Z,1516698190.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:10.442Z,1516698190.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:10.833Z,1516698190.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:11.236Z,1516698191.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:11.625Z,1516698191.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:12.035Z,1516698192.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:12.440Z,1516698192.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:12.840Z,1516698192.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:13.252Z,1516698193.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:13.638Z,1516698193.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:14.035Z,1516698194.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:14.439Z,1516698194.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:14.836Z,1516698194.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:15.270Z,1516698195.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:15.638Z,1516698195.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:16.048Z,1516698196.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:16.448Z,1516698196.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:16.837Z,1516698196.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:17.236Z,1516698197.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:17.625Z,1516698197.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:18.036Z,1516698198.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:18.422Z,1516698198.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:18.841Z,1516698198.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:19.251Z,1516698199.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:19.647Z,1516698199.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:20.043Z,1516698200.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:20.419Z,1516698200.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:20.824Z,1516698200.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:21.221Z,1516698201.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:21.657Z,1516698201.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:22.051Z,1516698202.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:22.437Z,1516698202.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:22.820Z,1516698202.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:23.220Z,1516698203.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:23.625Z,1516698203.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:24.029Z,1516698204.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:24.423Z,1516698204.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:24.830Z,1516698204.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:25.233Z,1516698205.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:25.636Z,1516698205.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:26.048Z,1516698206.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:26.421Z,1516698206.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:26.828Z,1516698206.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:27.228Z,1516698207.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:27.645Z,1516698207.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:28.045Z,1516698208.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:28.437Z,1516698208.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:28.828Z,1516698208.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:29.241Z,1516698209.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:29.625Z,1516698209.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:30.030Z,1516698210.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:30.431Z,1516698210.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:30.837Z,1516698210.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:31.241Z,1516698211.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:31.645Z,1516698211.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:32.039Z,1516698212.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:32.439Z,1516698212.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:32.828Z,1516698212.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:33.245Z,1516698213.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:33.645Z,1516698213.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:34.053Z,1516698214.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:34.446Z,1516698214.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:34.851Z,1516698214.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:35.253Z,1516698215.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:35.629Z,1516698215.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:36.028Z,1516698216.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:36.437Z,1516698216.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:36.837Z,1516698216.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:37.234Z,1516698217.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:37.641Z,1516698217.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:38.028Z,1516698218.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:38.428Z,1516698218.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:38.834Z,1516698218.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:39.228Z,1516698219.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:39.646Z,1516698219.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:40.045Z,1516698220.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:40.438Z,1516698220.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:40.837Z,1516698220.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:41.235Z,1516698221.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:41.632Z,1516698221.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:42.032Z,1516698222.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:42.433Z,1516698222.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:42.845Z,1516698222.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:43.243Z,1516698223.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:43.644Z,1516698223.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:44.030Z,1516698224.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:44.440Z,1516698224.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:44.835Z,1516698224.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:45.229Z,1516698225.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:45.648Z,1516698225.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:46.042Z,1516698226.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:46.438Z,1516698226.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:46.834Z,1516698226.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:47.233Z,1516698227.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:47.636Z,1516698227.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:48.032Z,1516698228.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:48.436Z,1516698228.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:48.840Z,1516698228.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:49.241Z,1516698229.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:49.653Z,1516698229.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:50.037Z,1516698230.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:50.433Z,1516698230.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:50.830Z,1516698230.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:51.233Z,1516698231.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:51.655Z,1516698231.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:52.046Z,1516698232.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:52.442Z,1516698232.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:52.833Z,1516698232.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:53.230Z,1516698233.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:53.633Z,1516698233.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:54.036Z,1516698234.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:54.438Z,1516698234.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:54.838Z,1516698234.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:55.240Z,1516698235.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:55.648Z,1516698235.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:56.037Z,1516698236.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:56.437Z,1516698236.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:56.831Z,1516698236.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:57.237Z,1516698237.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:57.638Z,1516698237.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:58.047Z,1516698238.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:58.446Z,1516698238.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:58.853Z,1516698238.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:59.223Z,1516698239.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:03:59.633Z,1516698239.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:00.029Z,1516698240.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:00.426Z,1516698240.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:00.834Z,1516698240.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:01.234Z,1516698241.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:01.660Z,1516698241.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:02.028Z,1516698242.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:02.432Z,1516698242.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:02.827Z,1516698242.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:03.226Z,1516698243.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:03.630Z,1516698243.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:04.033Z,1516698244.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:07.133Z,1516698247.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:07.245Z,1516698247.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:07.632Z,1516698247.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:08.028Z,1516698248.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:08.427Z,1516698248.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:08.834Z,1516698248.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:09.241Z,1516698249.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:09.641Z,1516698249.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:10.023Z,1516698250.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:10.425Z,1516698250.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:10.832Z,1516698250.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:11.230Z,1516698251.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:11.633Z,1516698251.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:12.030Z,1516698252.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:12.455Z,1516698252.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:12.825Z,1516698252.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:13.219Z,1516698253.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:13.626Z,1516698253.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:14.025Z,1516698254.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:14.429Z,1516698254.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:14.826Z,1516698254.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:15.228Z,1516698255.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:15.654Z,1516698255.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:16.024Z,1516698256.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:16.424Z,1516698256.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:16.833Z,1516698256.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:17.226Z,1516698257.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:17.667Z,1516698257.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:18.037Z,1516698258.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:18.443Z,1516698258.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:18.833Z,1516698258.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:18.846Z,1516698258.846 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:04:19.233Z,1516698259.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:19.630Z,1516698259.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:20.028Z,1516698260.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:20.430Z,1516698260.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:20.838Z,1516698260.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:21.240Z,1516698261.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:21.634Z,1516698261.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:22.034Z,1516698262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:22.428Z,1516698262.428 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:22.428Z,1516698262.428 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116 2018-01-23T09:04:22.429Z,1516698262.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:04:22.430Z,1516698262.430 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:22.430Z,1516698262.430 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116 2018-01-23T09:04:22.430Z,1516698262.430 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:04:22.432Z,1516698262.432 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:22.432Z,1516698262.432 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116 2018-01-23T09:04:22.432Z,1516698262.432 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:04:22.444Z,1516698262.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:04:22.444Z,1516698262.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:04:22.445Z,1516698262.445 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:04:22.843Z,1516698262.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:04:22.843Z,1516698262.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116 2018-01-23T09:04:22.844Z,1516698262.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:04:22.844Z,1516698262.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116 2018-01-23T09:04:22.844Z,1516698262.844 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:04:22.845Z,1516698262.845 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116 2018-01-23T09:04:23.235Z,1516698263.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:04:23.236Z,1516698263.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:04:23.236Z,1516698263.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:04:23.236Z,1516698263.236 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:04:23.237Z,1516698263.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:04:23.237Z,1516698263.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:04:23.238Z,1516698263.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:04:23.238Z,1516698263.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:04:23.238Z,1516698263.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:04:23.628Z,1516698263.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x43223 got:0x28423 2018-01-23T09:04:23.684Z,1516698263.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T09:04:23.685Z,1516698263.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:24.044Z,1516698264.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:04:24.045Z,1516698264.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:24.446Z,1516698264.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:04:24.447Z,1516698264.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:24.840Z,1516698264.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:04:24.841Z,1516698264.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:25.213Z,1516698265.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T09:04:25.241Z,1516698265.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:04:25.242Z,1516698265.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:25.638Z,1516698265.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:04:25.639Z,1516698265.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:26.035Z,1516698266.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:04:26.036Z,1516698266.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:26.440Z,1516698266.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:04:26.441Z,1516698266.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:26.825Z,1516698266.825 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T09:04:26.845Z,1516698266.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:04:26.846Z,1516698266.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:27.239Z,1516698267.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:04:27.240Z,1516698267.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:27.643Z,1516698267.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:04:27.644Z,1516698267.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:28.036Z,1516698268.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:04:28.037Z,1516698268.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:28.412Z,1516698268.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:04:28.413Z,1516698268.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:28.813Z,1516698268.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:04:28.814Z,1516698268.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:29.219Z,1516698269.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:04:29.220Z,1516698269.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:29.645Z,1516698269.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:04:29.645Z,1516698269.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:30.038Z,1516698270.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x51044 got:0x1857 2018-01-23T09:04:30.068Z,1516698270.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:04:30.069Z,1516698270.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:30.441Z,1516698270.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:04:30.442Z,1516698270.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:30.815Z,1516698270.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:04:30.816Z,1516698270.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:31.240Z,1516698271.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:04:31.241Z,1516698271.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:31.622Z,1516698271.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:04:31.623Z,1516698271.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:32.022Z,1516698272.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:04:32.024Z,1516698272.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:32.423Z,1516698272.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:04:32.424Z,1516698272.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:32.848Z,1516698272.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:04:32.849Z,1516698272.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:33.217Z,1516698273.217 [PNI_TCM](ERROR): CRC does not match. Expected:0x55324 got:0x38685 2018-01-23T09:04:33.252Z,1516698273.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:04:33.253Z,1516698273.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:33.648Z,1516698273.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:04:33.649Z,1516698273.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:34.040Z,1516698274.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:04:34.041Z,1516698274.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:34.438Z,1516698274.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:04:34.439Z,1516698274.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:34.823Z,1516698274.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:04:34.824Z,1516698274.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:35.225Z,1516698275.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:04:35.225Z,1516698275.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:35.624Z,1516698275.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:04:35.624Z,1516698275.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:36.048Z,1516698276.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:04:36.049Z,1516698276.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:36.450Z,1516698276.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:04:36.451Z,1516698276.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:36.823Z,1516698276.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:04:36.824Z,1516698276.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:37.222Z,1516698277.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:04:37.228Z,1516698277.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:37.641Z,1516698277.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:04:37.642Z,1516698277.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:38.027Z,1516698278.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x7918 got:0x47897 2018-01-23T09:04:38.061Z,1516698278.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:04:38.062Z,1516698278.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:38.436Z,1516698278.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:04:38.437Z,1516698278.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:38.834Z,1516698278.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:04:38.835Z,1516698278.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:39.237Z,1516698279.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:04:39.238Z,1516698279.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:39.635Z,1516698279.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:04:39.636Z,1516698279.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:40.034Z,1516698280.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:04:40.035Z,1516698280.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:40.437Z,1516698280.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:04:40.438Z,1516698280.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:40.823Z,1516698280.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:04:40.824Z,1516698280.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:41.235Z,1516698281.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:04:41.236Z,1516698281.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:41.635Z,1516698281.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:04:41.636Z,1516698281.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:42.035Z,1516698282.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:04:42.036Z,1516698282.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:42.442Z,1516698282.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:42.829Z,1516698282.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:43.229Z,1516698283.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:43.647Z,1516698283.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:44.049Z,1516698284.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:44.437Z,1516698284.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:44.836Z,1516698284.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:45.221Z,1516698285.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:45.633Z,1516698285.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:46.040Z,1516698286.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:46.446Z,1516698286.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:46.835Z,1516698286.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:47.238Z,1516698287.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:47.637Z,1516698287.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:48.048Z,1516698288.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:48.437Z,1516698288.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:48.837Z,1516698288.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:49.234Z,1516698289.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:49.643Z,1516698289.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:50.039Z,1516698290.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:50.444Z,1516698290.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:50.816Z,1516698290.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:51.209Z,1516698291.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:51.646Z,1516698291.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:52.058Z,1516698292.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:52.444Z,1516698292.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:52.820Z,1516698292.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:53.222Z,1516698293.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:53.622Z,1516698293.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:54.030Z,1516698294.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:54.422Z,1516698294.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:54.824Z,1516698294.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:55.226Z,1516698295.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:55.627Z,1516698295.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:56.027Z,1516698296.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:56.431Z,1516698296.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:56.822Z,1516698296.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:57.221Z,1516698297.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:57.626Z,1516698297.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:58.036Z,1516698298.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:58.426Z,1516698298.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:58.825Z,1516698298.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:59.221Z,1516698299.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:04:59.642Z,1516698299.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:00.033Z,1516698300.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:00.431Z,1516698300.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:00.823Z,1516698300.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:01.234Z,1516698301.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:01.631Z,1516698301.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:02.034Z,1516698302.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:02.430Z,1516698302.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:02.824Z,1516698302.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:03.221Z,1516698303.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:03.630Z,1516698303.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:04.034Z,1516698304.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:04.432Z,1516698304.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:07.525Z,1516698307.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:07.665Z,1516698307.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:07.998Z,1516698307.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:08.419Z,1516698308.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:08.821Z,1516698308.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:09.191Z,1516698309.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:09.590Z,1516698309.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:09.992Z,1516698309.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:10.391Z,1516698310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:10.798Z,1516698310.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:11.198Z,1516698311.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:11.594Z,1516698311.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:11.990Z,1516698311.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:12.392Z,1516698312.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:12.797Z,1516698312.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:13.192Z,1516698313.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:13.597Z,1516698313.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:14.006Z,1516698314.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:14.401Z,1516698314.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:14.797Z,1516698314.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:15.190Z,1516698315.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:15.591Z,1516698315.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:16.001Z,1516698316.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:16.396Z,1516698316.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:16.797Z,1516698316.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:17.202Z,1516698317.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:17.598Z,1516698317.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:17.991Z,1516698317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:18.392Z,1516698318.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:18.797Z,1516698318.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:19.192Z,1516698319.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:19.601Z,1516698319.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:20.005Z,1516698320.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:20.400Z,1516698320.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:20.805Z,1516698320.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:21.201Z,1516698321.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:21.591Z,1516698321.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:21.993Z,1516698321.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:22.397Z,1516698322.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:22.801Z,1516698322.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:23.202Z,1516698323.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:23.601Z,1516698323.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:23.992Z,1516698323.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:24.393Z,1516698324.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:24.793Z,1516698324.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:25.192Z,1516698325.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:25.598Z,1516698325.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:26.005Z,1516698326.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:26.431Z,1516698326.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:26.809Z,1516698326.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:27.195Z,1516698327.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:27.596Z,1516698327.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:27.997Z,1516698327.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:28.392Z,1516698328.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:28.802Z,1516698328.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:29.206Z,1516698329.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:29.602Z,1516698329.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:29.999Z,1516698329.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:30.397Z,1516698330.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:30.793Z,1516698330.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:31.201Z,1516698331.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:31.601Z,1516698331.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:32.002Z,1516698332.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:32.404Z,1516698332.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:32.802Z,1516698332.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:33.195Z,1516698333.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:33.604Z,1516698333.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:33.995Z,1516698333.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:34.393Z,1516698334.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:34.809Z,1516698334.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:35.202Z,1516698335.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:35.605Z,1516698335.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:35.994Z,1516698335.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:36.403Z,1516698336.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:36.801Z,1516698336.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:37.196Z,1516698337.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:37.594Z,1516698337.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:38.017Z,1516698338.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:38.408Z,1516698338.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:38.813Z,1516698338.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:39.193Z,1516698339.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:39.595Z,1516698339.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:39.000Z,1516698340.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:40.400Z,1516698340.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:40.821Z,1516698340.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:41.209Z,1516698341.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:41.612Z,1516698341.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:42.004Z,1516698342.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:42.381Z,1516698342.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:42.810Z,1516698342.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:43.217Z,1516698343.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:43.606Z,1516698343.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:44.029Z,1516698344.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:44.445Z,1516698344.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:44.813Z,1516698344.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:45.242Z,1516698345.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:45.643Z,1516698345.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:46.020Z,1516698346.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:46.422Z,1516698346.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:46.807Z,1516698346.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:47.221Z,1516698347.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:47.616Z,1516698347.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:48.017Z,1516698348.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:48.410Z,1516698348.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:48.813Z,1516698348.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:49.246Z,1516698349.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:49.614Z,1516698349.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:50.025Z,1516698350.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:50.424Z,1516698350.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:50.825Z,1516698350.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:51.214Z,1516698351.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:51.645Z,1516698351.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:52.004Z,1516698352.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:52.411Z,1516698352.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:52.854Z,1516698352.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:53.221Z,1516698353.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:53.621Z,1516698353.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:54.054Z,1516698354.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:54.421Z,1516698354.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:54.813Z,1516698354.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:55.266Z,1516698355.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:55.601Z,1516698355.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:55.998Z,1516698355.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:56.397Z,1516698356.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:56.801Z,1516698356.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:57.201Z,1516698357.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:57.595Z,1516698357.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:58.001Z,1516698358.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:58.397Z,1516698358.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:58.798Z,1516698358.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:59.201Z,1516698359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:59.598Z,1516698359.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:05:59.995Z,1516698359.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:00.390Z,1516698360.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:00.790Z,1516698360.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:01.192Z,1516698361.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:01.590Z,1516698361.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:02.001Z,1516698362.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:02.398Z,1516698362.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:02.801Z,1516698362.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:03.195Z,1516698363.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:03.591Z,1516698363.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:04.000Z,1516698364.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:04.395Z,1516698364.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:04.798Z,1516698364.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:07.901Z,1516698367.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:08.049Z,1516698368.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:08.394Z,1516698368.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:08.796Z,1516698368.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:09.200Z,1516698369.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:09.594Z,1516698369.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:10.005Z,1516698370.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:10.398Z,1516698370.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:10.805Z,1516698370.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:11.192Z,1516698371.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:11.599Z,1516698371.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:11.992Z,1516698371.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:12.397Z,1516698372.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:12.801Z,1516698372.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:13.199Z,1516698373.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:13.600Z,1516698373.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:13.988Z,1516698373.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:14.397Z,1516698374.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:14.795Z,1516698374.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:15.190Z,1516698375.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:15.591Z,1516698375.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:16.013Z,1516698376.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:16.413Z,1516698376.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:16.800Z,1516698376.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:17.202Z,1516698377.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:17.589Z,1516698377.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:18.001Z,1516698378.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:18.397Z,1516698378.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:18.801Z,1516698378.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:19.213Z,1516698379.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:19.598Z,1516698379.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:19.996Z,1516698379.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:20.400Z,1516698380.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:20.808Z,1516698380.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:21.203Z,1516698381.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:21.609Z,1516698381.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:21.993Z,1516698381.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:22.379Z,1516698382.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:22.806Z,1516698382.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:23.217Z,1516698383.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:23.613Z,1516698383.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:23.988Z,1516698383.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:24.400Z,1516698384.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:24.817Z,1516698384.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:25.194Z,1516698385.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:25.617Z,1516698385.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:25.986Z,1516698385.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:26.405Z,1516698386.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:26.798Z,1516698386.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:27.235Z,1516698387.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:27.598Z,1516698387.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:27.996Z,1516698387.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:28.395Z,1516698388.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:28.799Z,1516698388.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:29.152Z,1516698389.152 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T09:06:29.155Z,1516698389.155 [NAL9602] Data Fault, FailCount= 2 2018-01-23T09:06:29.155Z,1516698389.155 [NAL9602](ERROR): Data Fault 2018-01-23T09:06:29.240Z,1516698389.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:29.269Z,1516698389.269 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T09:06:29.552Z,1516698389.552 [NAL9602](INFO): Powering down 2018-01-23T09:06:29.589Z,1516698389.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:29.989Z,1516698389.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:30.399Z,1516698390.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:30.412Z,1516698390.412 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T09:06:30.412Z,1516698390.412 [NAL9602] No Fault, FailCount= 2 2018-01-23T09:06:30.776Z,1516698390.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:31.201Z,1516698391.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:31.586Z,1516698391.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:32.021Z,1516698392.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:32.387Z,1516698392.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:32.780Z,1516698392.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:33.189Z,1516698393.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:33.588Z,1516698393.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:33.985Z,1516698393.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:34.384Z,1516698394.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:34.787Z,1516698394.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:35.185Z,1516698395.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:35.584Z,1516698395.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:35.997Z,1516698395.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:36.391Z,1516698396.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:36.784Z,1516698396.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:37.197Z,1516698397.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:37.589Z,1516698397.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:37.990Z,1516698397.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:38.396Z,1516698398.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:38.789Z,1516698398.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:39.190Z,1516698399.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:39.597Z,1516698399.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:39.989Z,1516698399.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:40.384Z,1516698400.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:40.792Z,1516698400.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:41.186Z,1516698401.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:41.584Z,1516698401.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:41.986Z,1516698401.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:42.389Z,1516698402.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:42.784Z,1516698402.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:43.186Z,1516698403.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:43.589Z,1516698403.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:43.990Z,1516698403.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:44.401Z,1516698404.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:44.791Z,1516698404.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:45.192Z,1516698405.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:45.589Z,1516698405.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:45.990Z,1516698405.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:46.382Z,1516698406.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:46.813Z,1516698406.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:47.189Z,1516698407.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:47.585Z,1516698407.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:47.985Z,1516698407.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:48.394Z,1516698408.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:48.787Z,1516698408.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:49.201Z,1516698409.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:49.589Z,1516698409.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:49.990Z,1516698409.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:50.390Z,1516698410.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:50.787Z,1516698410.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:51.188Z,1516698411.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:51.597Z,1516698411.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:51.990Z,1516698411.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:52.386Z,1516698412.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:52.789Z,1516698412.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:53.187Z,1516698413.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:53.586Z,1516698413.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:53.988Z,1516698413.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:54.387Z,1516698414.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:54.785Z,1516698414.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:55.187Z,1516698415.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:55.587Z,1516698415.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:55.988Z,1516698415.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:56.386Z,1516698416.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:56.786Z,1516698416.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:57.187Z,1516698417.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:57.586Z,1516698417.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:57.986Z,1516698417.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:58.384Z,1516698418.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:58.792Z,1516698418.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:59.186Z,1516698419.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:59.583Z,1516698419.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:06:59.948Z,1516698419.948 [NAL9602](INFO): Powering up NAL9602 2018-01-23T09:06:59.998Z,1516698419.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:00.389Z,1516698420.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:00.784Z,1516698420.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:01.186Z,1516698421.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:01.597Z,1516698421.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:01.990Z,1516698421.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:02.391Z,1516698422.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:02.788Z,1516698422.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:03.190Z,1516698423.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:03.586Z,1516698423.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:03.989Z,1516698423.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:04.384Z,1516698424.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:04.787Z,1516698424.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:05.190Z,1516698425.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:08.323Z,1516698428.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:08.476Z,1516698428.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:08.786Z,1516698428.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:09.190Z,1516698429.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:09.584Z,1516698429.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:09.988Z,1516698429.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:10.386Z,1516698430.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:10.793Z,1516698430.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:11.148Z,1516698431.148 [NAL9602](INFO): NAL9602 initialized 2018-01-23T09:07:11.201Z,1516698431.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:11.588Z,1516698431.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:11.993Z,1516698431.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:12.406Z,1516698432.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:12.790Z,1516698432.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:13.196Z,1516698433.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:13.593Z,1516698433.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:14.000Z,1516698434.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:14.397Z,1516698434.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:14.797Z,1516698434.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:15.187Z,1516698435.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:15.585Z,1516698435.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:15.990Z,1516698435.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:16.390Z,1516698436.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:16.797Z,1516698436.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:17.201Z,1516698437.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:17.596Z,1516698437.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:17.988Z,1516698437.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:18.395Z,1516698438.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:18.787Z,1516698438.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:19.189Z,1516698439.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:19.590Z,1516698439.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:19.997Z,1516698439.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:20.402Z,1516698440.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:20.797Z,1516698440.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:21.187Z,1516698441.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:21.589Z,1516698441.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:21.998Z,1516698441.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:22.387Z,1516698442.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:22.799Z,1516698442.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:23.201Z,1516698443.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:23.598Z,1516698443.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:23.598Z,1516698443.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117 2018-01-23T09:07:23.598Z,1516698443.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:07:23.600Z,1516698443.600 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:23.600Z,1516698443.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117 2018-01-23T09:07:23.600Z,1516698443.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:07:23.602Z,1516698443.602 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:23.602Z,1516698443.602 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117 2018-01-23T09:07:23.602Z,1516698443.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:07:23.625Z,1516698443.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:07:23.626Z,1516698443.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:07:23.626Z,1516698443.626 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:07:24.010Z,1516698444.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:07:24.010Z,1516698444.010 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117 2018-01-23T09:07:24.010Z,1516698444.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:07:24.015Z,1516698444.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117 2018-01-23T09:07:24.015Z,1516698444.015 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:07:24.015Z,1516698444.015 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117 2018-01-23T09:07:24.396Z,1516698444.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:07:24.396Z,1516698444.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:07:24.396Z,1516698444.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:07:24.397Z,1516698444.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:07:24.397Z,1516698444.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:07:24.397Z,1516698444.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:07:24.398Z,1516698444.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:07:24.398Z,1516698444.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:07:24.399Z,1516698444.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:07:24.797Z,1516698444.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:07:24.798Z,1516698444.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:25.194Z,1516698445.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:07:25.196Z,1516698445.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:25.595Z,1516698445.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:07:25.596Z,1516698445.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:26.004Z,1516698446.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:07:26.005Z,1516698446.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:26.401Z,1516698446.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:07:26.402Z,1516698446.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:26.800Z,1516698446.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:07:26.801Z,1516698446.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:27.196Z,1516698447.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:07:27.197Z,1516698447.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:27.600Z,1516698447.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:07:27.601Z,1516698447.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:27.997Z,1516698447.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:07:27.998Z,1516698447.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:28.400Z,1516698448.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:07:28.401Z,1516698448.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:28.806Z,1516698448.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:07:28.811Z,1516698448.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:29.203Z,1516698449.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:07:29.204Z,1516698449.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:29.612Z,1516698449.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:07:29.613Z,1516698449.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:30.002Z,1516698450.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:07:30.003Z,1516698450.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:30.396Z,1516698450.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:07:30.397Z,1516698450.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:30.801Z,1516698450.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:07:30.802Z,1516698450.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:31.202Z,1516698451.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:07:31.204Z,1516698451.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:31.600Z,1516698451.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:07:31.601Z,1516698451.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:32.002Z,1516698452.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:07:32.003Z,1516698452.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:32.407Z,1516698452.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:07:32.408Z,1516698452.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:32.812Z,1516698452.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:07:32.813Z,1516698452.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:33.187Z,1516698453.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:07:33.188Z,1516698453.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:33.580Z,1516698453.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:07:33.581Z,1516698453.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:33.992Z,1516698453.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:07:33.993Z,1516698453.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:34.387Z,1516698454.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:07:34.388Z,1516698454.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:34.790Z,1516698454.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:07:34.791Z,1516698454.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:35.200Z,1516698455.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:07:35.201Z,1516698455.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:35.592Z,1516698455.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:07:35.593Z,1516698455.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:35.988Z,1516698455.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:07:35.989Z,1516698455.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:36.388Z,1516698456.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:07:36.389Z,1516698456.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:36.786Z,1516698456.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:07:36.787Z,1516698456.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:37.188Z,1516698457.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:07:37.189Z,1516698457.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:37.586Z,1516698457.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:07:37.587Z,1516698457.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:38.005Z,1516698458.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:07:38.006Z,1516698458.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:38.393Z,1516698458.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:07:38.394Z,1516698458.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:38.796Z,1516698458.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:07:38.797Z,1516698458.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:39.186Z,1516698459.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:07:39.187Z,1516698459.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:39.585Z,1516698459.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:07:39.586Z,1516698459.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:39.996Z,1516698459.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:07:39.997Z,1516698459.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:40.389Z,1516698460.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:07:40.390Z,1516698460.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:40.793Z,1516698460.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:07:40.794Z,1516698460.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:41.200Z,1516698461.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:07:41.201Z,1516698461.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:41.592Z,1516698461.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:07:41.592Z,1516698461.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:41.988Z,1516698461.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:07:41.989Z,1516698461.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:42.386Z,1516698462.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:07:42.387Z,1516698462.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:42.786Z,1516698462.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:07:42.787Z,1516698462.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:43.188Z,1516698463.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:07:43.189Z,1516698463.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:43.595Z,1516698463.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:07:43.596Z,1516698463.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:43.992Z,1516698463.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:44.394Z,1516698464.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:44.797Z,1516698464.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:45.189Z,1516698465.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:45.585Z,1516698465.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:45.996Z,1516698465.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:46.387Z,1516698466.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:46.790Z,1516698466.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:47.229Z,1516698467.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:47.596Z,1516698467.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:47.988Z,1516698467.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:48.397Z,1516698468.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:48.789Z,1516698468.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:49.189Z,1516698469.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:49.586Z,1516698469.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:49.990Z,1516698469.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:50.389Z,1516698470.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:50.790Z,1516698470.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:51.186Z,1516698471.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:51.587Z,1516698471.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:51.988Z,1516698471.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:52.389Z,1516698472.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:52.800Z,1516698472.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:53.201Z,1516698473.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:53.608Z,1516698473.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:53.997Z,1516698473.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:54.397Z,1516698474.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:54.789Z,1516698474.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:55.190Z,1516698475.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:55.595Z,1516698475.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:56.013Z,1516698476.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:56.402Z,1516698476.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:56.812Z,1516698476.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:57.198Z,1516698477.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:57.588Z,1516698477.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:57.996Z,1516698477.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:58.404Z,1516698478.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:58.805Z,1516698478.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:59.211Z,1516698479.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:59.617Z,1516698479.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:07:59.979Z,1516698479.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:00.385Z,1516698480.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:00.813Z,1516698480.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:01.192Z,1516698481.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:01.597Z,1516698481.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:01.990Z,1516698481.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:02.393Z,1516698482.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:02.819Z,1516698482.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:03.192Z,1516698483.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:03.588Z,1516698483.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:03.591Z,1516698483.591 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:08:03.591Z,1516698483.591 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:08:03.591Z,1516698483.591 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:08:03.591Z,1516698483.591 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:08:03.996Z,1516698483.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:03.000Z,1516698484.000 [Default:CheckIn:D] Stopped 2018-01-23T09:08:03.000Z,1516698484.000 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:08:04.401Z,1516698484.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:04.408Z,1516698484.408 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.198991 min 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn:E] Stopped 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn] Stopped 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn](INFO): Running loop #35 2018-01-23T09:08:04.409Z,1516698484.409 [Default:CheckIn] Running Loop=35 2018-01-23T09:08:04.410Z,1516698484.410 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:08:04.410Z,1516698484.410 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:08:04.803Z,1516698484.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:05.209Z,1516698485.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:08.295Z,1516698488.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:08.410Z,1516698488.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:08.762Z,1516698488.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:09.169Z,1516698489.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:09.565Z,1516698489.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:09.966Z,1516698489.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:10.366Z,1516698490.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:10.786Z,1516698490.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:11.154Z,1516698491.154 [PNI_TCM](ERROR): CRC does not match. Expected:0x56334 got:0x2587 2018-01-23T09:08:11.192Z,1516698491.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:11.564Z,1516698491.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:11.969Z,1516698491.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:12.376Z,1516698492.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:12.772Z,1516698492.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:13.177Z,1516698493.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:13.573Z,1516698493.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:13.973Z,1516698493.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:14.367Z,1516698494.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:14.774Z,1516698494.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:15.162Z,1516698495.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:15.577Z,1516698495.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:15.977Z,1516698495.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:16.378Z,1516698496.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:16.774Z,1516698496.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:17.181Z,1516698497.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:17.567Z,1516698497.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:17.968Z,1516698497.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:18.365Z,1516698498.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:18.788Z,1516698498.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:19.178Z,1516698499.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:19.573Z,1516698499.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:19.975Z,1516698499.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:20.381Z,1516698500.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:20.777Z,1516698500.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:21.176Z,1516698501.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:21.573Z,1516698501.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:21.980Z,1516698501.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:22.365Z,1516698502.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:22.776Z,1516698502.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:23.177Z,1516698503.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:23.584Z,1516698503.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:23.971Z,1516698503.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:24.373Z,1516698504.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:24.784Z,1516698504.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:25.208Z,1516698505.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:25.574Z,1516698505.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:25.972Z,1516698505.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:26.375Z,1516698506.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:26.773Z,1516698506.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:27.178Z,1516698507.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:27.574Z,1516698507.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:27.965Z,1516698507.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:28.373Z,1516698508.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:28.778Z,1516698508.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:29.179Z,1516698509.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:29.581Z,1516698509.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:29.967Z,1516698509.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:30.371Z,1516698510.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:30.783Z,1516698510.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:31.186Z,1516698511.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:31.598Z,1516698511.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:31.956Z,1516698511.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:32.381Z,1516698512.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:32.785Z,1516698512.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:33.199Z,1516698513.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:33.592Z,1516698513.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:33.961Z,1516698513.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:34.360Z,1516698514.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:34.762Z,1516698514.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:35.191Z,1516698515.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:35.596Z,1516698515.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:35.964Z,1516698515.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:36.358Z,1516698516.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:36.765Z,1516698516.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:37.173Z,1516698517.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:37.569Z,1516698517.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:37.960Z,1516698517.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:38.359Z,1516698518.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:38.766Z,1516698518.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:39.166Z,1516698519.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:39.566Z,1516698519.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:39.961Z,1516698519.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:40.360Z,1516698520.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:40.770Z,1516698520.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:41.166Z,1516698521.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:41.566Z,1516698521.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:41.966Z,1516698521.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:42.368Z,1516698522.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:42.776Z,1516698522.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:43.174Z,1516698523.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:43.572Z,1516698523.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:43.963Z,1516698523.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:44.365Z,1516698524.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:44.774Z,1516698524.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:45.175Z,1516698525.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:45.576Z,1516698525.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:45.967Z,1516698525.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:46.362Z,1516698526.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:46.779Z,1516698526.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:47.177Z,1516698527.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:47.572Z,1516698527.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:47.972Z,1516698527.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:48.373Z,1516698528.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:48.786Z,1516698528.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:49.185Z,1516698529.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:49.585Z,1516698529.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:49.977Z,1516698529.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:50.357Z,1516698530.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:50.785Z,1516698530.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:51.156Z,1516698531.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:51.556Z,1516698531.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:51.997Z,1516698531.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:52.365Z,1516698532.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:52.762Z,1516698532.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:53.158Z,1516698533.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:53.564Z,1516698533.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:53.965Z,1516698533.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:54.369Z,1516698534.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:54.759Z,1516698534.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:55.169Z,1516698535.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:55.566Z,1516698535.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:55.964Z,1516698535.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:56.358Z,1516698536.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:56.759Z,1516698536.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:57.160Z,1516698537.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:57.558Z,1516698537.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:57.969Z,1516698537.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:58.372Z,1516698538.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:58.769Z,1516698538.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:59.160Z,1516698539.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:59.559Z,1516698539.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:08:59.959Z,1516698539.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:00.362Z,1516698540.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:00.759Z,1516698540.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:01.169Z,1516698541.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:01.577Z,1516698541.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:01.970Z,1516698541.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:02.362Z,1516698542.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:02.768Z,1516698542.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:03.164Z,1516698543.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:03.559Z,1516698543.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:03.969Z,1516698543.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:04.376Z,1516698544.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:04.769Z,1516698544.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:05.162Z,1516698545.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:05.565Z,1516698545.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:08.665Z,1516698548.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:08.801Z,1516698548.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:09.151Z,1516698549.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:09.555Z,1516698549.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:09.950Z,1516698549.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:10.353Z,1516698550.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:10.731Z,1516698550.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:11.132Z,1516698551.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:11.531Z,1516698551.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:11.937Z,1516698551.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:12.361Z,1516698552.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:12.738Z,1516698552.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:13.132Z,1516698553.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:13.537Z,1516698553.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:13.937Z,1516698553.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:14.331Z,1516698554.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:14.731Z,1516698554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:15.138Z,1516698555.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:15.563Z,1516698555.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:15.962Z,1516698555.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:16.332Z,1516698556.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:16.729Z,1516698556.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:17.137Z,1516698557.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:17.537Z,1516698557.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:17.935Z,1516698557.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:18.338Z,1516698558.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:18.761Z,1516698558.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:19.152Z,1516698559.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:19.534Z,1516698559.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:19.937Z,1516698559.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:20.335Z,1516698560.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:20.741Z,1516698560.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:21.144Z,1516698561.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:21.547Z,1516698561.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:21.946Z,1516698561.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:22.347Z,1516698562.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:22.742Z,1516698562.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:23.140Z,1516698563.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:23.544Z,1516698563.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:23.948Z,1516698563.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:24.356Z,1516698564.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:24.749Z,1516698564.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:25.144Z,1516698565.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:25.541Z,1516698565.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:25.937Z,1516698565.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:26.350Z,1516698566.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:26.721Z,1516698566.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:27.150Z,1516698567.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:27.557Z,1516698567.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:27.953Z,1516698567.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:28.356Z,1516698568.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:28.727Z,1516698568.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:29.128Z,1516698569.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:29.533Z,1516698569.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:29.938Z,1516698569.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:30.334Z,1516698570.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:30.734Z,1516698570.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:31.131Z,1516698571.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:31.530Z,1516698571.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:31.923Z,1516698571.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:32.340Z,1516698572.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:32.728Z,1516698572.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:33.134Z,1516698573.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:33.563Z,1516698573.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:33.959Z,1516698573.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:34.330Z,1516698574.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:34.730Z,1516698574.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:35.130Z,1516698575.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:35.540Z,1516698575.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:35.964Z,1516698575.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:36.334Z,1516698576.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:36.734Z,1516698576.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:37.131Z,1516698577.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:37.543Z,1516698577.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:37.941Z,1516698577.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:38.344Z,1516698578.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:38.721Z,1516698578.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:39.145Z,1516698579.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:39.557Z,1516698579.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:39.953Z,1516698579.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:40.345Z,1516698580.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:40.723Z,1516698580.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:41.148Z,1516698581.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:41.533Z,1516698581.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:41.961Z,1516698581.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:42.355Z,1516698582.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:42.761Z,1516698582.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:43.130Z,1516698583.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:43.541Z,1516698583.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:43.937Z,1516698583.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:44.332Z,1516698584.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:44.729Z,1516698584.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:45.134Z,1516698585.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:45.537Z,1516698585.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:45.946Z,1516698585.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:46.337Z,1516698586.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:46.731Z,1516698586.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:47.132Z,1516698587.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:47.531Z,1516698587.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:47.944Z,1516698587.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:48.341Z,1516698588.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:48.741Z,1516698588.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:49.135Z,1516698589.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:49.530Z,1516698589.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:49.940Z,1516698589.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:50.332Z,1516698590.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:50.730Z,1516698590.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:51.150Z,1516698591.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:51.541Z,1516698591.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:51.945Z,1516698591.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:52.341Z,1516698592.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:52.736Z,1516698592.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:53.137Z,1516698593.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:53.532Z,1516698593.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:53.949Z,1516698593.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:54.342Z,1516698594.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:54.741Z,1516698594.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:55.132Z,1516698595.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:55.531Z,1516698595.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:55.941Z,1516698595.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:56.333Z,1516698596.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:56.731Z,1516698596.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:57.142Z,1516698597.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:57.541Z,1516698597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:57.943Z,1516698597.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:58.334Z,1516698598.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:58.741Z,1516698598.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:59.141Z,1516698599.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:59.534Z,1516698599.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:09:59.947Z,1516698599.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:00.350Z,1516698600.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:00.747Z,1516698600.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:01.137Z,1516698601.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:01.546Z,1516698601.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:01.939Z,1516698601.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:02.338Z,1516698602.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:02.745Z,1516698602.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:03.148Z,1516698603.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:03.548Z,1516698603.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:03.945Z,1516698603.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:04.341Z,1516698604.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:04.746Z,1516698604.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:05.140Z,1516698605.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:05.537Z,1516698605.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:05.945Z,1516698605.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:09.058Z,1516698609.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:09.213Z,1516698609.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:09.549Z,1516698609.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:09.952Z,1516698609.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:10.351Z,1516698610.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:10.751Z,1516698610.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:11.152Z,1516698611.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:11.555Z,1516698611.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:11.953Z,1516698611.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:12.353Z,1516698612.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:12.737Z,1516698612.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:13.148Z,1516698613.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:13.534Z,1516698613.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:13.961Z,1516698613.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:14.363Z,1516698614.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:14.760Z,1516698614.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:15.132Z,1516698615.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:15.537Z,1516698615.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:15.966Z,1516698615.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:16.342Z,1516698616.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:16.766Z,1516698616.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:17.140Z,1516698617.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:17.537Z,1516698617.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:17.946Z,1516698617.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:18.348Z,1516698618.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:18.742Z,1516698618.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:19.138Z,1516698619.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:19.544Z,1516698619.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:19.969Z,1516698619.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:20.346Z,1516698620.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:20.769Z,1516698620.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:21.139Z,1516698621.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:21.538Z,1516698621.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:21.942Z,1516698621.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:22.343Z,1516698622.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:22.742Z,1516698622.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:23.139Z,1516698623.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:23.538Z,1516698623.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:23.942Z,1516698623.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:24.345Z,1516698624.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:24.742Z,1516698624.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:24.742Z,1516698624.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118 2018-01-23T09:10:24.742Z,1516698624.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:10:24.744Z,1516698624.744 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:24.744Z,1516698624.744 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118 2018-01-23T09:10:24.744Z,1516698624.744 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:10:24.746Z,1516698624.746 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:24.746Z,1516698624.746 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118 2018-01-23T09:10:24.746Z,1516698624.746 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:10:24.770Z,1516698624.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:10:24.775Z,1516698624.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:10:24.775Z,1516698624.775 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:10:25.163Z,1516698625.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:10:25.163Z,1516698625.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118 2018-01-23T09:10:25.164Z,1516698625.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:10:25.164Z,1516698625.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118 2018-01-23T09:10:25.164Z,1516698625.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:10:25.164Z,1516698625.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118 2018-01-23T09:10:25.548Z,1516698625.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:10:25.548Z,1516698625.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:10:25.548Z,1516698625.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:10:25.549Z,1516698625.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:10:25.549Z,1516698625.549 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:10:25.549Z,1516698625.549 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:10:25.550Z,1516698625.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:10:25.550Z,1516698625.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:10:25.551Z,1516698625.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:10:25.955Z,1516698625.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:10:25.956Z,1516698625.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:26.349Z,1516698626.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:10:26.350Z,1516698626.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:26.756Z,1516698626.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:10:26.757Z,1516698626.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:27.144Z,1516698627.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:10:27.145Z,1516698627.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:27.540Z,1516698627.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:10:27.541Z,1516698627.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:27.948Z,1516698627.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:10:27.949Z,1516698627.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:28.352Z,1516698628.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:10:28.353Z,1516698628.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:28.752Z,1516698628.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:10:28.753Z,1516698628.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:29.140Z,1516698629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:10:29.141Z,1516698629.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:29.538Z,1516698629.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:10:29.539Z,1516698629.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:29.962Z,1516698629.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:10:29.979Z,1516698629.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:30.352Z,1516698630.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:10:30.353Z,1516698630.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:30.749Z,1516698630.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:10:30.750Z,1516698630.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:31.141Z,1516698631.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:10:31.142Z,1516698631.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:31.550Z,1516698631.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:10:31.551Z,1516698631.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:31.949Z,1516698631.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:10:31.950Z,1516698631.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:32.356Z,1516698632.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:10:32.357Z,1516698632.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:32.758Z,1516698632.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:10:32.759Z,1516698632.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:33.146Z,1516698633.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:10:33.148Z,1516698633.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:33.547Z,1516698633.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:10:33.548Z,1516698633.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:33.950Z,1516698633.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:10:33.951Z,1516698633.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:34.349Z,1516698634.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:10:34.350Z,1516698634.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:34.753Z,1516698634.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:10:34.754Z,1516698634.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:35.152Z,1516698635.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:10:35.153Z,1516698635.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:35.549Z,1516698635.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:10:35.550Z,1516698635.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:35.951Z,1516698635.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:10:35.952Z,1516698635.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:36.355Z,1516698636.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:10:36.356Z,1516698636.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:36.762Z,1516698636.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:10:36.764Z,1516698636.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:37.149Z,1516698637.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:10:37.150Z,1516698637.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:37.542Z,1516698637.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:10:37.544Z,1516698637.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:37.955Z,1516698637.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:10:37.956Z,1516698637.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:38.354Z,1516698638.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:10:38.356Z,1516698638.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:38.758Z,1516698638.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:10:38.759Z,1516698638.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:39.148Z,1516698639.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:10:39.149Z,1516698639.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:39.550Z,1516698639.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:10:39.551Z,1516698639.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:39.955Z,1516698639.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:10:39.956Z,1516698639.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:40.352Z,1516698640.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:10:40.353Z,1516698640.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:40.759Z,1516698640.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:10:40.760Z,1516698640.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:41.153Z,1516698641.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:10:41.154Z,1516698641.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:41.536Z,1516698641.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:10:41.537Z,1516698641.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:41.961Z,1516698641.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:10:41.961Z,1516698641.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:42.367Z,1516698642.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:10:42.368Z,1516698642.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:42.761Z,1516698642.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:10:42.762Z,1516698642.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:43.132Z,1516698643.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:10:43.133Z,1516698643.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:43.535Z,1516698643.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:10:43.536Z,1516698643.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:43.958Z,1516698643.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:10:43.959Z,1516698643.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:44.364Z,1516698644.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:10:44.365Z,1516698644.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:44.761Z,1516698644.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:45.136Z,1516698645.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:45.565Z,1516698645.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:45.970Z,1516698645.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:46.346Z,1516698646.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:46.746Z,1516698646.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:47.140Z,1516698647.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:47.535Z,1516698647.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:47.942Z,1516698647.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:48.371Z,1516698648.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:48.742Z,1516698648.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:49.140Z,1516698649.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:49.539Z,1516698649.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:49.942Z,1516698649.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:50.369Z,1516698650.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:50.749Z,1516698650.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:51.140Z,1516698651.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:51.539Z,1516698651.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:51.942Z,1516698651.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:52.342Z,1516698652.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:52.742Z,1516698652.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:53.141Z,1516698653.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:53.538Z,1516698653.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:53.941Z,1516698653.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:54.351Z,1516698654.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:54.749Z,1516698654.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:55.153Z,1516698655.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:55.540Z,1516698655.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:55.941Z,1516698655.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:56.341Z,1516698656.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:56.744Z,1516698656.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:57.161Z,1516698657.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:57.553Z,1516698657.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:57.953Z,1516698657.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:58.344Z,1516698658.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:58.749Z,1516698658.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:59.140Z,1516698659.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:59.541Z,1516698659.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:10:59.950Z,1516698659.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:00.350Z,1516698660.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:00.753Z,1516698660.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:01.149Z,1516698661.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:01.549Z,1516698661.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:01.945Z,1516698661.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:02.348Z,1516698662.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:02.751Z,1516698662.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:03.150Z,1516698663.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:03.553Z,1516698663.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:03.951Z,1516698663.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:04.347Z,1516698664.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:04.747Z,1516698664.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:05.152Z,1516698665.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:05.540Z,1516698665.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:05.947Z,1516698665.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:09.059Z,1516698669.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:09.213Z,1516698669.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:09.562Z,1516698669.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:09.969Z,1516698669.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:10.357Z,1516698670.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:10.755Z,1516698670.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:11.175Z,1516698671.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:11.565Z,1516698671.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:11.965Z,1516698671.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:12.360Z,1516698672.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:12.757Z,1516698672.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:13.165Z,1516698673.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:13.569Z,1516698673.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:13.965Z,1516698673.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:14.373Z,1516698674.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:14.771Z,1516698674.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:15.170Z,1516698675.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:15.564Z,1516698675.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:15.969Z,1516698675.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:16.359Z,1516698676.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:16.765Z,1516698676.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:17.171Z,1516698677.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:17.570Z,1516698677.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:17.973Z,1516698677.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:18.365Z,1516698678.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:18.765Z,1516698678.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:19.165Z,1516698679.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:19.574Z,1516698679.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:19.965Z,1516698679.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:20.374Z,1516698680.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:20.775Z,1516698680.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:21.173Z,1516698681.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:21.561Z,1516698681.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:21.965Z,1516698681.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:22.365Z,1516698682.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:22.769Z,1516698682.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:23.172Z,1516698683.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:23.571Z,1516698683.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:23.980Z,1516698683.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:24.363Z,1516698684.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:24.764Z,1516698684.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:25.164Z,1516698685.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:25.568Z,1516698685.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:25.961Z,1516698685.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:26.366Z,1516698686.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:26.770Z,1516698686.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:27.172Z,1516698687.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:27.565Z,1516698687.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:27.966Z,1516698687.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:28.361Z,1516698688.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:28.769Z,1516698688.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:29.173Z,1516698689.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:29.574Z,1516698689.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:29.966Z,1516698689.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:30.365Z,1516698690.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:30.757Z,1516698690.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:31.157Z,1516698691.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:31.567Z,1516698691.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:31.965Z,1516698691.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:32.379Z,1516698692.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:32.770Z,1516698692.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:33.166Z,1516698693.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:33.557Z,1516698693.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:33.966Z,1516698693.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:34.362Z,1516698694.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:34.763Z,1516698694.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:35.173Z,1516698695.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:35.574Z,1516698695.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:35.966Z,1516698695.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:36.366Z,1516698696.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:36.765Z,1516698696.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:37.157Z,1516698697.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:37.564Z,1516698697.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:37.969Z,1516698697.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:38.373Z,1516698698.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:38.770Z,1516698698.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:39.166Z,1516698699.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:39.557Z,1516698699.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:39.964Z,1516698699.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:40.362Z,1516698700.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:40.757Z,1516698700.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:41.173Z,1516698701.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:41.570Z,1516698701.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:41.966Z,1516698701.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:42.364Z,1516698702.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:42.765Z,1516698702.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:43.157Z,1516698703.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:43.564Z,1516698703.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:43.965Z,1516698703.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:44.366Z,1516698704.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:44.779Z,1516698704.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:45.170Z,1516698705.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:45.557Z,1516698705.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:45.966Z,1516698705.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:46.362Z,1516698706.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:46.757Z,1516698706.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:47.173Z,1516698707.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:47.574Z,1516698707.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:47.966Z,1516698707.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:48.363Z,1516698708.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:48.761Z,1516698708.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:49.157Z,1516698709.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:49.568Z,1516698709.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:49.957Z,1516698709.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:50.366Z,1516698710.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:50.776Z,1516698710.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:51.170Z,1516698711.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:51.557Z,1516698711.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:51.965Z,1516698711.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:52.358Z,1516698712.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:52.764Z,1516698712.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:53.171Z,1516698713.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:53.570Z,1516698713.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:53.968Z,1516698713.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:54.368Z,1516698714.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:54.758Z,1516698714.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:55.173Z,1516698715.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:55.566Z,1516698715.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:55.958Z,1516698715.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:56.381Z,1516698716.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:56.779Z,1516698716.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:57.173Z,1516698717.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:57.558Z,1516698717.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:57.972Z,1516698717.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:58.365Z,1516698718.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:58.765Z,1516698718.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:59.177Z,1516698719.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:59.570Z,1516698719.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:11:59.978Z,1516698719.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:00.365Z,1516698720.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:00.753Z,1516698720.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:01.165Z,1516698721.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:01.571Z,1516698721.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:01.973Z,1516698721.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:02.369Z,1516698722.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:02.771Z,1516698722.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:03.171Z,1516698723.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:03.573Z,1516698723.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:03.964Z,1516698723.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:04.362Z,1516698724.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:04.762Z,1516698724.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:05.173Z,1516698725.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:05.569Z,1516698725.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:05.969Z,1516698725.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:09.060Z,1516698729.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:09.185Z,1516698729.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:09.553Z,1516698729.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:09.940Z,1516698729.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:10.330Z,1516698730.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:10.739Z,1516698730.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:11.136Z,1516698731.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:11.529Z,1516698731.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:11.926Z,1516698731.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:12.340Z,1516698732.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:12.757Z,1516698732.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:13.132Z,1516698733.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:13.527Z,1516698733.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:13.928Z,1516698733.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:14.342Z,1516698734.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:14.727Z,1516698734.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:15.132Z,1516698735.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:15.537Z,1516698735.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:15.954Z,1516698735.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:16.331Z,1516698736.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:16.726Z,1516698736.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:17.131Z,1516698737.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:17.555Z,1516698737.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:17.936Z,1516698737.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:18.331Z,1516698738.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:18.724Z,1516698738.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:19.155Z,1516698739.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:19.530Z,1516698739.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:19.934Z,1516698739.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:20.330Z,1516698740.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:20.737Z,1516698740.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:21.132Z,1516698741.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:21.534Z,1516698741.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:21.933Z,1516698741.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:22.359Z,1516698742.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:22.723Z,1516698742.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:23.133Z,1516698743.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:23.532Z,1516698743.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:23.960Z,1516698743.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:24.324Z,1516698744.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:24.722Z,1516698744.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:25.134Z,1516698745.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:25.561Z,1516698745.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:25.930Z,1516698745.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:26.324Z,1516698746.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:26.728Z,1516698746.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:27.137Z,1516698747.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:27.534Z,1516698747.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:27.937Z,1516698747.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:28.330Z,1516698748.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:28.737Z,1516698748.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:29.134Z,1516698749.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:29.536Z,1516698749.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:29.938Z,1516698749.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:30.326Z,1516698750.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:30.732Z,1516698750.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:31.135Z,1516698751.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:31.538Z,1516698751.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:31.935Z,1516698751.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:32.328Z,1516698752.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:32.724Z,1516698752.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:33.140Z,1516698753.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:33.539Z,1516698753.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:33.935Z,1516698753.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:34.330Z,1516698754.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:34.729Z,1516698754.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:35.135Z,1516698755.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:35.538Z,1516698755.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:35.935Z,1516698755.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:36.328Z,1516698756.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:36.733Z,1516698756.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:37.135Z,1516698757.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:37.545Z,1516698757.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:37.936Z,1516698757.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:38.332Z,1516698758.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:38.734Z,1516698758.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:39.134Z,1516698759.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:39.546Z,1516698759.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:39.940Z,1516698759.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:40.329Z,1516698760.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:40.731Z,1516698760.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:41.135Z,1516698761.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:41.537Z,1516698761.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:41.937Z,1516698761.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:42.333Z,1516698762.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:42.721Z,1516698762.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:43.141Z,1516698763.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:43.539Z,1516698763.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:43.941Z,1516698763.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:44.328Z,1516698764.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:44.743Z,1516698764.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:45.145Z,1516698765.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:45.545Z,1516698765.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:45.944Z,1516698765.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:46.314Z,1516698766.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:46.721Z,1516698766.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:47.152Z,1516698767.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:47.526Z,1516698767.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:47.952Z,1516698767.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:48.327Z,1516698768.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:48.721Z,1516698768.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:49.147Z,1516698769.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:49.551Z,1516698769.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:49.950Z,1516698769.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:50.328Z,1516698770.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:50.723Z,1516698770.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:51.126Z,1516698771.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:51.530Z,1516698771.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:51.932Z,1516698771.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:52.321Z,1516698772.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:52.722Z,1516698772.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:53.122Z,1516698773.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:53.526Z,1516698773.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:53.930Z,1516698773.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:54.332Z,1516698774.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:54.721Z,1516698774.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:55.124Z,1516698775.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:55.531Z,1516698775.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:55.929Z,1516698775.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:56.330Z,1516698776.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:56.740Z,1516698776.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:57.130Z,1516698777.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:57.529Z,1516698777.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:57.933Z,1516698777.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:58.322Z,1516698778.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:58.732Z,1516698778.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:59.127Z,1516698779.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:59.533Z,1516698779.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:12:59.937Z,1516698779.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:00.334Z,1516698780.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:00.725Z,1516698780.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:01.125Z,1516698781.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:01.533Z,1516698781.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:01.933Z,1516698781.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:02.334Z,1516698782.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:02.738Z,1516698782.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:03.137Z,1516698783.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:03.537Z,1516698783.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:03.937Z,1516698783.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:04.333Z,1516698784.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:04.728Z,1516698784.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:04.731Z,1516698784.731 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:08:04.4Z 2018-01-23T09:13:04.731Z,1516698784.731 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:13:04.732Z,1516698784.732 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:13:05.133Z,1516698785.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:05.657Z,1516698785.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:05.961Z,1516698785.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:09.034Z,1516698789.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:09.111Z,1516698789.111 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0140.lzma 2018-01-23T09:13:09.176Z,1516698789.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:09.504Z,1516698789.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:09.857Z,1516698789.857 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0140.lzma.bak 2018-01-23T09:13:09.857Z,1516698789.857 [DataOverHttps](INFO): SBD MOMSN=7755331 2018-01-23T09:13:09.928Z,1516698789.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:10.653Z,1516698790.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:10.792Z,1516698790.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:13.859Z,1516698793.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:14.009Z,1516698794.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:14.364Z,1516698794.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:14.763Z,1516698794.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:15.158Z,1516698795.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:15.564Z,1516698795.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:18.659Z,1516698798.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:18.739Z,1516698798.739 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0141.lzma 2018-01-23T09:13:18.817Z,1516698798.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:19.145Z,1516698799.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:19.492Z,1516698799.492 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0141.lzma.bak 2018-01-23T09:13:19.492Z,1516698799.492 [DataOverHttps](INFO): SBD MOMSN=7755333 2018-01-23T09:13:19.557Z,1516698799.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:20.165Z,1516698800.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:20.168Z,1516698800.168 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:13:20.168Z,1516698800.168 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:13:20.168Z,1516698800.168 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:13:20.345Z,1516698800.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:23.661Z,1516698803.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:23.797Z,1516698803.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:24.200Z,1516698804.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:24.550Z,1516698804.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:24.934Z,1516698804.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:25.329Z,1516698805.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:25.729Z,1516698805.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:25.729Z,1516698805.729 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119 2018-01-23T09:13:25.729Z,1516698805.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:13:25.731Z,1516698805.731 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:25.731Z,1516698805.731 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119 2018-01-23T09:13:25.731Z,1516698805.731 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:13:25.733Z,1516698805.733 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:25.733Z,1516698805.733 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119 2018-01-23T09:13:25.733Z,1516698805.733 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:13:25.745Z,1516698805.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:13:25.745Z,1516698805.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:13:25.745Z,1516698805.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:13:26.297Z,1516698806.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:13:26.297Z,1516698806.297 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119 2018-01-23T09:13:26.297Z,1516698806.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:13:26.297Z,1516698806.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119 2018-01-23T09:13:26.298Z,1516698806.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:13:26.298Z,1516698806.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119 2018-01-23T09:13:26.548Z,1516698806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:13:26.549Z,1516698806.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:13:26.549Z,1516698806.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:13:26.549Z,1516698806.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:13:26.550Z,1516698806.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:13:26.550Z,1516698806.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:13:26.550Z,1516698806.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:13:26.555Z,1516698806.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:13:26.555Z,1516698806.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:13:26.964Z,1516698806.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:13:26.965Z,1516698806.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:27.357Z,1516698807.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:13:27.358Z,1516698807.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:27.724Z,1516698807.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:13:27.725Z,1516698807.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:28.124Z,1516698808.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:13:28.125Z,1516698808.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:28.533Z,1516698808.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:13:28.534Z,1516698808.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:28.930Z,1516698808.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:13:28.934Z,1516698808.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:29.360Z,1516698809.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:13:29.360Z,1516698809.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:29.754Z,1516698809.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:13:29.755Z,1516698809.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:30.132Z,1516698810.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:13:30.133Z,1516698810.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:30.528Z,1516698810.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:13:30.529Z,1516698810.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:30.942Z,1516698810.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:13:30.943Z,1516698810.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:31.333Z,1516698811.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:13:31.334Z,1516698811.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:31.728Z,1516698811.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:13:31.729Z,1516698811.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:32.127Z,1516698812.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:13:32.128Z,1516698812.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:32.533Z,1516698812.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:13:32.534Z,1516698812.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:32.932Z,1516698812.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:13:32.933Z,1516698812.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:33.337Z,1516698813.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:13:33.338Z,1516698813.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:33.733Z,1516698813.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:13:33.734Z,1516698813.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:34.127Z,1516698814.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:13:34.128Z,1516698814.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:34.529Z,1516698814.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:13:34.530Z,1516698814.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:34.936Z,1516698814.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:13:34.937Z,1516698814.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:35.338Z,1516698815.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:13:35.339Z,1516698815.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:35.744Z,1516698815.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:13:35.745Z,1516698815.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:36.140Z,1516698816.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:13:36.141Z,1516698816.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:36.532Z,1516698816.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:13:36.533Z,1516698816.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:36.936Z,1516698816.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:13:36.937Z,1516698816.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:37.328Z,1516698817.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:13:37.329Z,1516698817.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:37.732Z,1516698817.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:13:37.733Z,1516698817.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:38.130Z,1516698818.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:13:38.131Z,1516698818.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:38.536Z,1516698818.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:13:38.537Z,1516698818.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:38.944Z,1516698818.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:13:38.945Z,1516698818.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:39.344Z,1516698819.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:13:39.345Z,1516698819.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:39.729Z,1516698819.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:13:39.730Z,1516698819.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:40.132Z,1516698820.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:13:40.133Z,1516698820.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:40.531Z,1516698820.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:13:40.532Z,1516698820.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:40.936Z,1516698820.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:13:40.937Z,1516698820.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:41.340Z,1516698821.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:13:41.341Z,1516698821.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:41.744Z,1516698821.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:13:41.745Z,1516698821.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:42.144Z,1516698822.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:13:42.145Z,1516698822.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:42.531Z,1516698822.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:13:42.532Z,1516698822.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:42.930Z,1516698822.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:13:42.931Z,1516698822.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:43.337Z,1516698823.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:13:43.338Z,1516698823.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:43.729Z,1516698823.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:13:43.730Z,1516698823.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:44.128Z,1516698824.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:13:44.129Z,1516698824.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:44.537Z,1516698824.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:13:44.538Z,1516698824.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:44.944Z,1516698824.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:13:44.945Z,1516698824.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:45.344Z,1516698825.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:13:45.345Z,1516698825.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:45.741Z,1516698825.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:46.127Z,1516698826.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:46.529Z,1516698826.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:46.936Z,1516698826.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:47.341Z,1516698827.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:47.745Z,1516698827.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:48.145Z,1516698828.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:48.534Z,1516698828.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:48.941Z,1516698828.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:49.341Z,1516698829.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:49.728Z,1516698829.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:50.129Z,1516698830.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:50.542Z,1516698830.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:50.940Z,1516698830.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:51.337Z,1516698831.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:51.731Z,1516698831.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:52.136Z,1516698832.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:52.536Z,1516698832.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:52.928Z,1516698832.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:53.338Z,1516698833.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:53.742Z,1516698833.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:54.145Z,1516698834.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:54.529Z,1516698834.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:54.935Z,1516698834.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:55.336Z,1516698835.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:55.737Z,1516698835.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:56.141Z,1516698836.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:56.538Z,1516698836.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:56.942Z,1516698836.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:57.345Z,1516698837.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:57.741Z,1516698837.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:58.129Z,1516698838.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:58.534Z,1516698838.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:58.942Z,1516698838.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:59.345Z,1516698839.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:13:59.741Z,1516698839.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:00.138Z,1516698840.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:00.536Z,1516698840.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:00.941Z,1516698840.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:01.335Z,1516698841.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:01.736Z,1516698841.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:02.133Z,1516698842.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:02.549Z,1516698842.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:02.945Z,1516698842.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:03.346Z,1516698843.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:03.737Z,1516698843.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:04.141Z,1516698844.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:04.534Z,1516698844.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:04.933Z,1516698844.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:05.349Z,1516698845.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:05.753Z,1516698845.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:06.149Z,1516698846.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:06.536Z,1516698846.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:06.941Z,1516698846.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:07.334Z,1516698847.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:07.737Z,1516698847.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:08.138Z,1516698848.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:08.546Z,1516698848.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:08.945Z,1516698848.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:09.345Z,1516698849.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:09.740Z,1516698849.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:10.114Z,1516698850.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x30117 got:0x16910 2018-01-23T09:14:10.141Z,1516698850.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:10.532Z,1516698850.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:10.945Z,1516698850.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:11.344Z,1516698851.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:11.744Z,1516698851.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:12.141Z,1516698852.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:12.542Z,1516698852.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:12.941Z,1516698852.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:13.338Z,1516698853.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:13.733Z,1516698853.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:14.139Z,1516698854.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:14.543Z,1516698854.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:14.953Z,1516698854.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:15.341Z,1516698855.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:15.739Z,1516698855.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:16.140Z,1516698856.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:16.537Z,1516698856.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:16.933Z,1516698856.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:17.340Z,1516698857.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:17.744Z,1516698857.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:18.142Z,1516698858.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:18.533Z,1516698858.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:18.939Z,1516698858.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:18.953Z,1516698858.953 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:14:19.337Z,1516698859.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:19.738Z,1516698859.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:20.132Z,1516698860.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:20.541Z,1516698860.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:20.946Z,1516698860.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:24.035Z,1516698864.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:24.152Z,1516698864.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:24.529Z,1516698864.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:24.904Z,1516698864.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:25.310Z,1516698865.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:25.710Z,1516698865.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:26.112Z,1516698866.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:26.504Z,1516698866.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:26.899Z,1516698866.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:27.309Z,1516698867.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:27.713Z,1516698867.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:28.113Z,1516698868.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:28.501Z,1516698868.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:28.903Z,1516698868.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:29.317Z,1516698869.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:29.712Z,1516698869.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:30.109Z,1516698870.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:30.502Z,1516698870.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:30.908Z,1516698870.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:31.309Z,1516698871.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:31.720Z,1516698871.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:32.113Z,1516698872.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:32.502Z,1516698872.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:32.901Z,1516698872.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:33.310Z,1516698873.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:33.717Z,1516698873.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:34.109Z,1516698874.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:34.504Z,1516698874.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:34.903Z,1516698874.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:35.309Z,1516698875.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:35.716Z,1516698875.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:36.117Z,1516698876.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:36.502Z,1516698876.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:36.909Z,1516698876.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:37.317Z,1516698877.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:37.717Z,1516698877.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:38.113Z,1516698878.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:38.509Z,1516698878.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:38.902Z,1516698878.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:39.316Z,1516698879.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:39.713Z,1516698879.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:40.111Z,1516698880.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:40.503Z,1516698880.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:40.903Z,1516698880.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:41.314Z,1516698881.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:41.715Z,1516698881.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:42.117Z,1516698882.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:42.509Z,1516698882.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:42.905Z,1516698882.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:43.318Z,1516698883.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:43.721Z,1516698883.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:44.116Z,1516698884.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:44.502Z,1516698884.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:44.903Z,1516698884.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:45.318Z,1516698885.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:45.716Z,1516698885.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:46.114Z,1516698886.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:46.517Z,1516698886.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:46.897Z,1516698886.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:47.309Z,1516698887.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:47.712Z,1516698887.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:48.091Z,1516698888.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:48.518Z,1516698888.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:48.919Z,1516698888.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:49.317Z,1516698889.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:49.721Z,1516698889.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:50.100Z,1516698890.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:50.492Z,1516698890.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:50.904Z,1516698890.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:51.297Z,1516698891.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:51.702Z,1516698891.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:52.110Z,1516698892.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:52.501Z,1516698892.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:52.898Z,1516698892.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:53.299Z,1516698893.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:53.704Z,1516698893.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:54.100Z,1516698894.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:54.502Z,1516698894.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:54.904Z,1516698894.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:55.309Z,1516698895.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:55.699Z,1516698895.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:56.099Z,1516698896.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:56.498Z,1516698896.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:56.901Z,1516698896.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:57.299Z,1516698897.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:57.706Z,1516698897.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:58.106Z,1516698898.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:58.504Z,1516698898.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:58.899Z,1516698898.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:59.298Z,1516698899.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:14:59.703Z,1516698899.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:00.109Z,1516698900.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:00.506Z,1516698900.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:00.905Z,1516698900.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:01.309Z,1516698901.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:01.698Z,1516698901.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:02.100Z,1516698902.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:02.498Z,1516698902.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:02.909Z,1516698902.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:03.299Z,1516698903.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:03.709Z,1516698903.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:04.106Z,1516698904.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:04.505Z,1516698904.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:04.898Z,1516698904.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:05.298Z,1516698905.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:05.700Z,1516698905.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:06.099Z,1516698906.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:06.509Z,1516698906.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:06.905Z,1516698906.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:07.309Z,1516698907.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:07.709Z,1516698907.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:08.103Z,1516698908.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:08.498Z,1516698908.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:08.901Z,1516698908.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:09.299Z,1516698909.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:09.709Z,1516698909.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:10.106Z,1516698910.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:10.512Z,1516698910.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:10.898Z,1516698910.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:11.298Z,1516698911.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:11.700Z,1516698911.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:12.098Z,1516698912.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:12.505Z,1516698912.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:12.905Z,1516698912.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:13.309Z,1516698913.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:13.700Z,1516698913.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:14.098Z,1516698914.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:14.498Z,1516698914.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:14.901Z,1516698914.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:15.299Z,1516698915.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:15.713Z,1516698915.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:16.110Z,1516698916.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:16.505Z,1516698916.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:16.899Z,1516698916.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:17.308Z,1516698917.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:17.701Z,1516698917.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:18.103Z,1516698918.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:18.509Z,1516698918.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:18.920Z,1516698918.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:19.313Z,1516698919.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:19.709Z,1516698919.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:20.109Z,1516698920.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:20.506Z,1516698920.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:20.913Z,1516698920.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:21.309Z,1516698921.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:24.414Z,1516698924.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:24.573Z,1516698924.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:24.917Z,1516698924.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:25.308Z,1516698925.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:25.705Z,1516698925.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:26.108Z,1516698926.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:26.526Z,1516698926.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:26.911Z,1516698926.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:27.316Z,1516698927.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:27.707Z,1516698927.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:28.107Z,1516698928.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:28.507Z,1516698928.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:28.908Z,1516698928.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:29.285Z,1516698929.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:29.714Z,1516698929.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:30.120Z,1516698930.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:30.508Z,1516698930.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:30.913Z,1516698930.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:31.291Z,1516698931.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:31.692Z,1516698931.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:32.119Z,1516698932.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:32.522Z,1516698932.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:32.918Z,1516698932.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:33.324Z,1516698933.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:33.698Z,1516698933.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:33.741Z,1516698933.741 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-23T09:15:34.101Z,1516698934.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:34.521Z,1516698934.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:34.895Z,1516698934.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:35.289Z,1516698935.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:35.702Z,1516698935.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:36.101Z,1516698936.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:36.498Z,1516698936.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:36.901Z,1516698936.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:37.295Z,1516698937.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:37.696Z,1516698937.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:38.101Z,1516698938.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:38.498Z,1516698938.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:38.898Z,1516698938.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:39.310Z,1516698939.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:39.682Z,1516698939.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:39.696Z,1516698939.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:40.077Z,1516698940.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:40.104Z,1516698940.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:40.473Z,1516698940.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:40.509Z,1516698940.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:40.874Z,1516698940.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:40.901Z,1516698940.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:41.270Z,1516698941.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:41.293Z,1516698941.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:41.691Z,1516698941.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:41.706Z,1516698941.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:42.096Z,1516698942.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:42.110Z,1516698942.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:42.487Z,1516698942.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:42.509Z,1516698942.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:42.871Z,1516698942.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:42.904Z,1516698942.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:43.274Z,1516698943.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:43.305Z,1516698943.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:43.677Z,1516698943.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:43.703Z,1516698943.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:44.071Z,1516698944.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:44.105Z,1516698944.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:44.497Z,1516698944.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:44.512Z,1516698944.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:44.527Z,1516698944.527 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.002293 CHAN A1 (24V): -0.005504 CHAN A2 (12V): 0.000649 CHAN A3 (5V): -0.001709 CHAN B0 (3.3V): 0.000004 CHAN B1 (3.15aV): 0.000411 CHAN B2 (3.15bV): -0.000922 CHAN B3 (GND): -0.000547 OPEN: 0.005277 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-23T09:15:44.896Z,1516698944.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:44.957Z,1516698944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:45.297Z,1516698945.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:45.312Z,1516698945.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:45.689Z,1516698945.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:45.709Z,1516698945.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:46.074Z,1516698946.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:46.110Z,1516698946.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:46.503Z,1516698946.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:46.522Z,1516698946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:46.879Z,1516698946.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:46.928Z,1516698946.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:47.280Z,1516698947.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:47.331Z,1516698947.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:47.697Z,1516698947.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:47.734Z,1516698947.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:48.107Z,1516698948.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:48.127Z,1516698948.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:48.484Z,1516698948.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:48.499Z,1516698948.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:48.885Z,1516698948.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:48.900Z,1516698948.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:49.287Z,1516698949.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:49.333Z,1516698949.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:49.683Z,1516698949.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:49.711Z,1516698949.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:50.086Z,1516698950.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:50.117Z,1516698950.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:50.494Z,1516698950.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:50.545Z,1516698950.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:50.893Z,1516698950.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:50.929Z,1516698950.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:51.289Z,1516698951.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:51.325Z,1516698951.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:51.673Z,1516698951.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:51.753Z,1516698951.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:52.091Z,1516698952.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:52.171Z,1516698952.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:52.486Z,1516698952.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:52.531Z,1516698952.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:52.891Z,1516698952.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:52.938Z,1516698952.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:53.282Z,1516698953.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:53.337Z,1516698953.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:53.700Z,1516698953.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:53.740Z,1516698953.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:54.089Z,1516698954.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:54.160Z,1516698954.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:54.489Z,1516698954.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:54.529Z,1516698954.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:54.881Z,1516698954.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:54.920Z,1516698954.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:55.278Z,1516698955.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:55.363Z,1516698955.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:55.697Z,1516698955.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:55.752Z,1516698955.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:56.079Z,1516698956.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:56.115Z,1516698956.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:56.490Z,1516698956.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:56.532Z,1516698956.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:56.916Z,1516698956.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:56.945Z,1516698956.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:57.305Z,1516698957.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:57.343Z,1516698957.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:57.695Z,1516698957.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:57.753Z,1516698957.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:58.085Z,1516698958.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:58.105Z,1516698958.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:58.488Z,1516698958.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:58.533Z,1516698958.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:58.889Z,1516698958.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:58.949Z,1516698958.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:59.289Z,1516698959.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:59.313Z,1516698959.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:15:59.697Z,1516698959.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:15:59.721Z,1516698959.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:00.165Z,1516698960.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:00.546Z,1516698960.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:00.911Z,1516698960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:01.309Z,1516698961.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:01.709Z,1516698961.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:02.109Z,1516698962.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:02.520Z,1516698962.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:02.920Z,1516698962.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:03.318Z,1516698963.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:03.681Z,1516698963.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:03.695Z,1516698963.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:04.080Z,1516698964.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:04.101Z,1516698964.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:04.478Z,1516698964.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:04.497Z,1516698964.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:04.880Z,1516698964.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:04.895Z,1516698964.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:05.274Z,1516698965.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:05.301Z,1516698965.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:05.695Z,1516698965.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:05.727Z,1516698965.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:06.087Z,1516698966.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:06.126Z,1516698966.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:06.483Z,1516698966.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:06.498Z,1516698966.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:06.878Z,1516698966.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:06.897Z,1516698966.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:07.281Z,1516698967.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:07.296Z,1516698967.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:07.680Z,1516698967.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:07.703Z,1516698967.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:08.080Z,1516698968.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:08.095Z,1516698968.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:08.490Z,1516698968.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:08.505Z,1516698968.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:08.890Z,1516698968.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:08.909Z,1516698968.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:09.290Z,1516698969.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:09.305Z,1516698969.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:09.683Z,1516698969.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:09.698Z,1516698969.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:10.077Z,1516698970.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:10.097Z,1516698970.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:10.476Z,1516698970.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:10.494Z,1516698970.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:10.882Z,1516698970.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:10.896Z,1516698970.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:11.276Z,1516698971.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:11.298Z,1516698971.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:11.693Z,1516698971.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:11.708Z,1516698971.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:12.094Z,1516698972.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:12.116Z,1516698972.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:12.488Z,1516698972.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:12.509Z,1516698972.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:12.871Z,1516698972.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:12.909Z,1516698972.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:13.272Z,1516698973.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:13.306Z,1516698973.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:13.677Z,1516698973.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:13.704Z,1516698973.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:14.072Z,1516698974.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:14.105Z,1516698974.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:14.487Z,1516698974.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:14.515Z,1516698974.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:14.883Z,1516698974.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:14.910Z,1516698974.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:15.283Z,1516698975.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:15.298Z,1516698975.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:15.681Z,1516698975.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:15.695Z,1516698975.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:16.077Z,1516698976.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:16.097Z,1516698976.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:16.487Z,1516698976.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:16:16.502Z,1516698976.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:16.940Z,1516698976.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:17.308Z,1516698977.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:17.712Z,1516698977.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:18.109Z,1516698978.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:18.516Z,1516698978.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:18.910Z,1516698978.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:19.312Z,1516698979.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:19.706Z,1516698979.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:20.107Z,1516698980.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:20.516Z,1516698980.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:20.915Z,1516698980.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:21.315Z,1516698981.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:21.709Z,1516698981.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:24.804Z,1516698984.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:24.960Z,1516698984.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:25.281Z,1516698985.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:25.684Z,1516698985.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.067Z,1516698986.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.470Z,1516698986.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.871Z,1516698986.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.871Z,1516698986.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120 2018-01-23T09:16:26.871Z,1516698986.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:16:26.873Z,1516698986.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.873Z,1516698986.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120 2018-01-23T09:16:26.873Z,1516698986.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:16:26.875Z,1516698986.875 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:26.875Z,1516698986.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120 2018-01-23T09:16:26.875Z,1516698986.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:16:26.886Z,1516698986.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:16:26.887Z,1516698986.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:16:26.887Z,1516698986.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:16:27.303Z,1516698987.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:16:27.303Z,1516698987.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120 2018-01-23T09:16:27.303Z,1516698987.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:16:27.303Z,1516698987.303 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120 2018-01-23T09:16:27.304Z,1516698987.304 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:16:27.304Z,1516698987.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120 2018-01-23T09:16:27.684Z,1516698987.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:16:27.684Z,1516698987.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:16:27.685Z,1516698987.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:16:27.685Z,1516698987.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:16:27.685Z,1516698987.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:16:27.686Z,1516698987.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:16:27.686Z,1516698987.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:16:27.686Z,1516698987.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:16:27.687Z,1516698987.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:16:28.080Z,1516698988.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:16:28.081Z,1516698988.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:28.482Z,1516698988.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:16:28.483Z,1516698988.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:28.883Z,1516698988.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:16:28.884Z,1516698988.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:29.266Z,1516698989.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:16:29.267Z,1516698989.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:29.661Z,1516698989.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:16:29.662Z,1516698989.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:30.092Z,1516698990.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:16:30.093Z,1516698990.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:30.497Z,1516698990.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:16:30.498Z,1516698990.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:30.873Z,1516698990.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:16:30.874Z,1516698990.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:31.277Z,1516698991.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:16:31.278Z,1516698991.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:31.674Z,1516698991.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:16:31.675Z,1516698991.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:32.069Z,1516698992.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:16:32.070Z,1516698992.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:32.470Z,1516698992.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:16:32.472Z,1516698992.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:32.874Z,1516698992.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:16:32.875Z,1516698992.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:33.276Z,1516698993.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:16:33.277Z,1516698993.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:33.676Z,1516698993.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:16:33.677Z,1516698993.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:34.084Z,1516698994.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:16:34.085Z,1516698994.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:34.468Z,1516698994.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:16:34.469Z,1516698994.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:34.886Z,1516698994.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:16:34.903Z,1516698994.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:35.278Z,1516698995.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:16:35.279Z,1516698995.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:35.679Z,1516698995.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:16:35.680Z,1516698995.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:36.070Z,1516698996.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:16:36.071Z,1516698996.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:36.469Z,1516698996.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:16:36.470Z,1516698996.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:36.872Z,1516698996.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:16:36.873Z,1516698996.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:37.276Z,1516698997.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:16:37.277Z,1516698997.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:37.680Z,1516698997.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:16:37.681Z,1516698997.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:38.088Z,1516698998.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:16:38.089Z,1516698998.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:38.479Z,1516698998.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:16:38.480Z,1516698998.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:38.871Z,1516698998.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:16:38.872Z,1516698998.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:39.276Z,1516698999.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:16:39.277Z,1516698999.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:39.677Z,1516698999.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:16:39.677Z,1516698999.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:40.080Z,1516699000.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:16:40.081Z,1516699000.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:40.481Z,1516699000.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:16:40.482Z,1516699000.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:40.885Z,1516699000.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:16:40.886Z,1516699000.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:41.289Z,1516699001.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:16:41.289Z,1516699001.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:41.679Z,1516699001.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:16:41.680Z,1516699001.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:42.078Z,1516699002.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:16:42.080Z,1516699002.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:42.480Z,1516699002.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:16:42.481Z,1516699002.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:42.872Z,1516699002.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:16:42.873Z,1516699002.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:43.280Z,1516699003.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:16:43.281Z,1516699003.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:43.688Z,1516699003.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:16:43.689Z,1516699003.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:44.092Z,1516699004.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:16:44.093Z,1516699004.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:44.492Z,1516699004.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:16:44.493Z,1516699004.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:44.864Z,1516699004.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:16:44.865Z,1516699004.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:45.257Z,1516699005.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:16:45.258Z,1516699005.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:45.684Z,1516699005.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:16:45.685Z,1516699005.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:46.064Z,1516699006.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:16:46.065Z,1516699006.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:46.468Z,1516699006.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:16:46.469Z,1516699006.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:46.870Z,1516699006.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:16:46.871Z,1516699006.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:47.273Z,1516699007.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:47.669Z,1516699007.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:48.066Z,1516699008.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:48.467Z,1516699008.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:48.877Z,1516699008.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:49.277Z,1516699009.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:49.673Z,1516699009.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:50.078Z,1516699010.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:50.477Z,1516699010.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:50.871Z,1516699010.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:51.273Z,1516699011.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:51.695Z,1516699011.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:52.072Z,1516699012.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:52.467Z,1516699012.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:52.877Z,1516699012.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:53.280Z,1516699013.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:53.679Z,1516699013.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:54.069Z,1516699014.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:54.475Z,1516699014.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:54.872Z,1516699014.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:55.270Z,1516699015.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:55.692Z,1516699015.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:56.081Z,1516699016.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:56.485Z,1516699016.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:56.872Z,1516699016.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:57.280Z,1516699017.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:57.677Z,1516699017.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:58.072Z,1516699018.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:58.466Z,1516699018.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:58.877Z,1516699018.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:59.281Z,1516699019.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:16:59.685Z,1516699019.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:00.072Z,1516699020.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:00.477Z,1516699020.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:00.872Z,1516699020.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:01.275Z,1516699021.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:01.681Z,1516699021.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:02.082Z,1516699022.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:02.478Z,1516699022.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:02.877Z,1516699022.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:03.279Z,1516699023.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:03.677Z,1516699023.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:04.080Z,1516699024.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:04.457Z,1516699024.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:04.891Z,1516699024.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:05.286Z,1516699025.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:05.691Z,1516699025.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:06.061Z,1516699026.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:06.469Z,1516699026.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:06.865Z,1516699026.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:07.264Z,1516699027.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:07.692Z,1516699027.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:08.094Z,1516699028.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:08.497Z,1516699028.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:08.893Z,1516699028.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:09.268Z,1516699029.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:09.677Z,1516699029.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:10.071Z,1516699030.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:10.470Z,1516699030.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:10.885Z,1516699030.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:11.285Z,1516699031.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:11.682Z,1516699031.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:12.074Z,1516699032.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:12.489Z,1516699032.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:12.876Z,1516699032.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:13.285Z,1516699033.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:13.629Z,1516699033.629 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T09:17:13.629Z,1516699033.629 [NAL9602] Data Fault, FailCount= 3 2018-01-23T09:17:13.629Z,1516699033.629 [NAL9602](ERROR): Data Fault 2018-01-23T09:17:13.682Z,1516699033.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:13.703Z,1516699033.703 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T09:17:14.028Z,1516699034.028 [NAL9602](INFO): Powering down 2018-01-23T09:17:14.073Z,1516699034.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:14.486Z,1516699034.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:14.858Z,1516699034.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:14.892Z,1516699034.892 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T09:17:14.892Z,1516699034.892 [NAL9602] No Fault, FailCount= 3 2018-01-23T09:17:15.265Z,1516699035.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:15.665Z,1516699035.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:16.072Z,1516699036.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:16.469Z,1516699036.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:16.866Z,1516699036.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:17.273Z,1516699037.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:17.674Z,1516699037.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:18.067Z,1516699038.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:18.463Z,1516699038.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:18.865Z,1516699038.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:19.265Z,1516699039.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:19.663Z,1516699039.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:20.065Z,1516699040.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:20.465Z,1516699040.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:20.863Z,1516699040.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:21.265Z,1516699041.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:21.675Z,1516699041.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:22.066Z,1516699042.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:25.157Z,1516699045.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:25.285Z,1516699045.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:25.629Z,1516699045.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:26.031Z,1516699046.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:26.423Z,1516699046.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:26.854Z,1516699046.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:27.219Z,1516699047.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x62323 got:0x1857 2018-01-23T09:17:27.237Z,1516699047.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:27.623Z,1516699047.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:28.028Z,1516699048.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:28.433Z,1516699048.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:28.816Z,1516699048.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T09:17:28.855Z,1516699048.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:29.218Z,1516699049.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x26337 got:0x213 2018-01-23T09:17:29.237Z,1516699049.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:29.630Z,1516699049.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:30.051Z,1516699050.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:30.430Z,1516699050.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:30.829Z,1516699050.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:31.231Z,1516699051.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:31.637Z,1516699051.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:32.031Z,1516699052.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:32.423Z,1516699052.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:32.825Z,1516699052.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:33.252Z,1516699053.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:33.624Z,1516699053.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:34.025Z,1516699054.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:34.431Z,1516699054.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:34.848Z,1516699054.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:35.231Z,1516699055.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:35.631Z,1516699055.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:36.029Z,1516699056.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:36.454Z,1516699056.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:36.832Z,1516699056.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:37.231Z,1516699057.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:37.629Z,1516699057.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:38.052Z,1516699058.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:38.426Z,1516699058.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:38.828Z,1516699058.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:39.230Z,1516699059.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:39.652Z,1516699059.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:40.032Z,1516699060.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:40.431Z,1516699060.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:40.830Z,1516699060.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:41.238Z,1516699061.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:41.625Z,1516699061.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:42.032Z,1516699062.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:42.428Z,1516699062.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:42.859Z,1516699062.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:43.223Z,1516699063.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:43.631Z,1516699063.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:44.032Z,1516699064.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:44.385Z,1516699064.385 [NAL9602](INFO): Powering up NAL9602 2018-01-23T09:17:44.455Z,1516699064.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:44.825Z,1516699064.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:45.236Z,1516699065.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:45.631Z,1516699065.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:46.056Z,1516699066.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:46.428Z,1516699066.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:46.825Z,1516699066.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:47.230Z,1516699067.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:47.626Z,1516699067.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:48.025Z,1516699068.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:48.424Z,1516699068.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:48.838Z,1516699068.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:49.229Z,1516699069.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:49.634Z,1516699069.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:50.024Z,1516699070.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:50.426Z,1516699070.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:50.832Z,1516699070.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:51.225Z,1516699071.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:51.632Z,1516699071.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:52.029Z,1516699072.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:52.430Z,1516699072.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:52.831Z,1516699072.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:53.226Z,1516699073.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:53.633Z,1516699073.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:54.031Z,1516699074.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:54.432Z,1516699074.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:54.829Z,1516699074.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:55.241Z,1516699075.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:55.584Z,1516699075.584 [NAL9602](INFO): NAL9602 initialized 2018-01-23T09:17:55.640Z,1516699075.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:56.027Z,1516699076.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:56.434Z,1516699076.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:56.841Z,1516699076.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:57.243Z,1516699077.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:57.631Z,1516699077.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:58.031Z,1516699078.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:58.438Z,1516699078.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:58.837Z,1516699078.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:59.238Z,1516699079.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:17:59.646Z,1516699079.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:00.040Z,1516699080.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:00.424Z,1516699080.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:00.834Z,1516699080.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:01.237Z,1516699081.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:01.632Z,1516699081.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:02.037Z,1516699082.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:02.438Z,1516699082.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:02.838Z,1516699082.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:03.241Z,1516699083.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:03.635Z,1516699083.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:04.023Z,1516699084.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:04.444Z,1516699084.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:04.840Z,1516699084.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:05.241Z,1516699085.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:05.649Z,1516699085.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:06.040Z,1516699086.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:06.441Z,1516699086.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:06.823Z,1516699086.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:07.245Z,1516699087.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:07.624Z,1516699087.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:08.030Z,1516699088.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:08.461Z,1516699088.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:08.838Z,1516699088.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:09.229Z,1516699089.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:09.627Z,1516699089.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:10.029Z,1516699090.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:10.424Z,1516699090.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:10.823Z,1516699090.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:11.233Z,1516699091.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:11.629Z,1516699091.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:12.030Z,1516699092.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:12.422Z,1516699092.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:12.833Z,1516699092.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:13.222Z,1516699093.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:13.631Z,1516699093.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:14.024Z,1516699094.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:14.433Z,1516699094.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:14.837Z,1516699094.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:15.234Z,1516699095.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:15.625Z,1516699095.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:16.033Z,1516699096.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:16.428Z,1516699096.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:16.828Z,1516699096.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:17.233Z,1516699097.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:17.645Z,1516699097.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:18.041Z,1516699098.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:18.429Z,1516699098.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:18.828Z,1516699098.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:19.228Z,1516699099.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:19.625Z,1516699099.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:20.028Z,1516699100.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:20.445Z,1516699100.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:20.464Z,1516699100.464 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:18:20.464Z,1516699100.464 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:18:20.464Z,1516699100.464 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:18:20.464Z,1516699100.464 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:18:20.841Z,1516699100.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:20.844Z,1516699100.844 [Default:CheckIn:D] Stopped 2018-01-23T09:18:20.844Z,1516699100.844 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:18:21.242Z,1516699101.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:21.245Z,1516699101.245 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 360.479720 min 2018-01-23T09:18:21.245Z,1516699101.245 [Default:CheckIn:E] Stopped 2018-01-23T09:18:21.245Z,1516699101.245 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:18:21.245Z,1516699101.245 [Default:CheckIn] Stopped 2018-01-23T09:18:21.246Z,1516699101.246 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:18:21.246Z,1516699101.246 [Default:CheckIn](INFO): Running loop #36 2018-01-23T09:18:21.246Z,1516699101.246 [Default:CheckIn] Running Loop=36 2018-01-23T09:18:21.246Z,1516699101.246 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:18:21.246Z,1516699101.246 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:18:21.637Z,1516699101.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:22.032Z,1516699102.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:22.437Z,1516699102.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:25.520Z,1516699105.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:25.678Z,1516699105.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:25.995Z,1516699105.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:26.399Z,1516699106.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:26.787Z,1516699106.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:27.186Z,1516699107.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:27.588Z,1516699107.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:27.988Z,1516699107.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:28.397Z,1516699108.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:28.797Z,1516699108.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:29.197Z,1516699109.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:29.595Z,1516699109.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:29.988Z,1516699109.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:30.392Z,1516699110.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:30.797Z,1516699110.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:31.199Z,1516699111.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:31.609Z,1516699111.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:32.009Z,1516699112.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:32.390Z,1516699112.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:32.795Z,1516699112.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:33.188Z,1516699113.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:33.599Z,1516699113.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:33.993Z,1516699113.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:34.398Z,1516699114.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:34.802Z,1516699114.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:35.198Z,1516699115.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:35.596Z,1516699115.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:35.998Z,1516699115.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:36.396Z,1516699116.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:36.795Z,1516699116.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:37.198Z,1516699117.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:37.609Z,1516699117.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:37.998Z,1516699117.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:38.398Z,1516699118.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:38.793Z,1516699118.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:39.196Z,1516699119.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:39.592Z,1516699119.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:39.997Z,1516699119.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:40.398Z,1516699120.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:40.805Z,1516699120.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:41.198Z,1516699121.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:41.595Z,1516699121.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:41.999Z,1516699121.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:42.392Z,1516699122.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:42.795Z,1516699122.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:43.198Z,1516699123.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:43.609Z,1516699123.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:44.005Z,1516699124.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:44.394Z,1516699124.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:44.797Z,1516699124.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:45.197Z,1516699125.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:45.600Z,1516699125.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:45.999Z,1516699125.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:46.405Z,1516699126.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:46.803Z,1516699126.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:47.205Z,1516699127.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:47.599Z,1516699127.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:48.000Z,1516699128.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:48.399Z,1516699128.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:48.800Z,1516699128.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:49.203Z,1516699129.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:49.609Z,1516699129.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:50.007Z,1516699130.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:50.400Z,1516699130.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:50.799Z,1516699130.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:51.199Z,1516699131.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:51.600Z,1516699131.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:51.999Z,1516699131.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:52.409Z,1516699132.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:52.803Z,1516699132.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:53.209Z,1516699133.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:53.599Z,1516699133.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:54.000Z,1516699134.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:54.399Z,1516699134.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:54.799Z,1516699134.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:55.208Z,1516699135.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:55.606Z,1516699135.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:56.007Z,1516699136.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:56.400Z,1516699136.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:56.799Z,1516699136.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:57.201Z,1516699137.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:57.603Z,1516699137.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:58.008Z,1516699138.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:58.388Z,1516699138.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:58.806Z,1516699138.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:59.209Z,1516699139.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:18:59.612Z,1516699139.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:00.009Z,1516699140.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:00.404Z,1516699140.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:00.804Z,1516699140.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:01.214Z,1516699141.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:01.613Z,1516699141.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:02.013Z,1516699142.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:02.415Z,1516699142.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:02.781Z,1516699142.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:03.212Z,1516699143.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:03.618Z,1516699143.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:04.015Z,1516699144.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:04.393Z,1516699144.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:04.789Z,1516699144.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:05.195Z,1516699145.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:05.595Z,1516699145.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:05.997Z,1516699145.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:06.392Z,1516699146.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:06.786Z,1516699146.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:07.190Z,1516699147.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:07.590Z,1516699147.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:07.990Z,1516699147.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:08.387Z,1516699148.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:08.786Z,1516699148.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:09.190Z,1516699149.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:09.593Z,1516699149.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:10.002Z,1516699150.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:10.389Z,1516699150.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:10.788Z,1516699150.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:11.197Z,1516699151.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:11.594Z,1516699151.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:12.000Z,1516699152.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:12.391Z,1516699152.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:12.793Z,1516699152.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:13.200Z,1516699153.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:13.597Z,1516699153.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:13.994Z,1516699153.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:14.388Z,1516699154.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:14.786Z,1516699154.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:15.197Z,1516699155.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:15.592Z,1516699155.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:15.997Z,1516699155.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:16.399Z,1516699156.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:16.792Z,1516699156.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:17.201Z,1516699157.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:17.601Z,1516699157.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:18.005Z,1516699158.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:18.392Z,1516699158.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:18.790Z,1516699158.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:19.197Z,1516699159.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:19.598Z,1516699159.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:19.997Z,1516699159.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:20.389Z,1516699160.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:20.786Z,1516699160.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:21.205Z,1516699161.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:21.601Z,1516699161.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:21.997Z,1516699161.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:22.393Z,1516699162.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:22.792Z,1516699162.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:25.895Z,1516699165.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:26.049Z,1516699166.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:26.381Z,1516699166.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:26.784Z,1516699166.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.181Z,1516699167.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.560Z,1516699167.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.958Z,1516699167.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.959Z,1516699167.959 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121 2018-01-23T09:19:27.959Z,1516699167.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:19:27.960Z,1516699167.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.961Z,1516699167.961 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121 2018-01-23T09:19:27.961Z,1516699167.961 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:19:27.962Z,1516699167.962 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:27.962Z,1516699167.962 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121 2018-01-23T09:19:27.963Z,1516699167.963 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:19:27.995Z,1516699167.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:19:27.995Z,1516699167.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:19:27.995Z,1516699167.995 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:19:28.403Z,1516699168.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:19:28.403Z,1516699168.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121 2018-01-23T09:19:28.404Z,1516699168.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:19:28.404Z,1516699168.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121 2018-01-23T09:19:28.404Z,1516699168.404 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:19:28.404Z,1516699168.404 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121 2018-01-23T09:19:28.765Z,1516699168.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:19:28.765Z,1516699168.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:19:28.766Z,1516699168.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:19:28.766Z,1516699168.766 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:19:28.766Z,1516699168.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:19:28.767Z,1516699168.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:19:28.767Z,1516699168.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:19:28.768Z,1516699168.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:19:28.768Z,1516699168.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:19:29.176Z,1516699169.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:19:29.177Z,1516699169.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:29.568Z,1516699169.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:19:29.569Z,1516699169.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:29.958Z,1516699169.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:19:29.959Z,1516699169.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:30.364Z,1516699170.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:19:30.365Z,1516699170.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:30.764Z,1516699170.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:19:30.764Z,1516699170.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:31.158Z,1516699171.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:19:31.159Z,1516699171.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:31.576Z,1516699171.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:19:31.577Z,1516699171.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:31.969Z,1516699171.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:19:31.970Z,1516699171.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:32.372Z,1516699172.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:19:32.373Z,1516699172.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:32.763Z,1516699172.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:19:32.764Z,1516699172.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:33.159Z,1516699173.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:19:33.160Z,1516699173.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:33.562Z,1516699173.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:19:33.567Z,1516699173.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:33.970Z,1516699173.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:19:33.971Z,1516699173.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:34.369Z,1516699174.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:19:34.370Z,1516699174.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:34.773Z,1516699174.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:19:34.774Z,1516699174.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:35.170Z,1516699175.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:19:35.171Z,1516699175.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:35.564Z,1516699175.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:19:35.565Z,1516699175.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:35.962Z,1516699175.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:19:35.963Z,1516699175.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:36.366Z,1516699176.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:19:36.367Z,1516699176.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:36.770Z,1516699176.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:19:36.771Z,1516699176.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:37.163Z,1516699177.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:19:37.164Z,1516699177.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:37.572Z,1516699177.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:19:37.573Z,1516699177.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:37.974Z,1516699177.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:19:37.975Z,1516699177.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:38.374Z,1516699178.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:19:38.375Z,1516699178.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:38.765Z,1516699178.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:19:38.766Z,1516699178.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:39.169Z,1516699179.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:19:39.170Z,1516699179.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:39.561Z,1516699179.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:19:39.562Z,1516699179.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:39.973Z,1516699179.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:19:39.974Z,1516699179.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:40.371Z,1516699180.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:19:40.372Z,1516699180.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:40.773Z,1516699180.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:19:40.774Z,1516699180.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:41.171Z,1516699181.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:19:41.172Z,1516699181.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:41.562Z,1516699181.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:19:41.563Z,1516699181.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:41.970Z,1516699181.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:19:41.971Z,1516699181.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:42.360Z,1516699182.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:19:42.361Z,1516699182.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:42.759Z,1516699182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:19:42.760Z,1516699182.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:43.161Z,1516699183.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:19:43.162Z,1516699183.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:43.569Z,1516699183.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:19:43.570Z,1516699183.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:43.977Z,1516699183.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:19:43.978Z,1516699183.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:44.376Z,1516699184.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:19:44.377Z,1516699184.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:44.766Z,1516699184.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:19:44.767Z,1516699184.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:45.160Z,1516699185.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:19:45.161Z,1516699185.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:45.570Z,1516699185.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:19:45.571Z,1516699185.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:45.960Z,1516699185.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:19:45.961Z,1516699185.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:46.369Z,1516699186.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:19:46.370Z,1516699186.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:46.780Z,1516699186.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:19:46.781Z,1516699186.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:47.174Z,1516699187.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:19:47.175Z,1516699187.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:47.568Z,1516699187.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:19:47.569Z,1516699187.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:47.967Z,1516699187.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:48.362Z,1516699188.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:48.758Z,1516699188.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:49.165Z,1516699189.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:49.581Z,1516699189.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:49.974Z,1516699189.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:50.370Z,1516699190.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:50.762Z,1516699190.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:51.169Z,1516699191.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:51.570Z,1516699191.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:51.974Z,1516699191.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:52.371Z,1516699192.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:52.778Z,1516699192.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:53.173Z,1516699193.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:53.557Z,1516699193.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:53.971Z,1516699193.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:54.373Z,1516699194.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:54.797Z,1516699194.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:55.171Z,1516699195.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:55.578Z,1516699195.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:55.977Z,1516699195.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:56.379Z,1516699196.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:56.772Z,1516699196.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:57.171Z,1516699197.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:57.560Z,1516699197.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:57.951Z,1516699197.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:58.381Z,1516699198.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:58.784Z,1516699198.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:59.178Z,1516699199.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:59.557Z,1516699199.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:19:59.956Z,1516699199.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:00.363Z,1516699200.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:00.761Z,1516699200.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:01.157Z,1516699201.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:01.565Z,1516699201.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:01.985Z,1516699201.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:02.382Z,1516699202.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:02.759Z,1516699202.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:03.160Z,1516699203.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:03.558Z,1516699203.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:03.968Z,1516699203.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:04.370Z,1516699204.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:04.774Z,1516699204.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:05.172Z,1516699205.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:05.558Z,1516699205.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:05.968Z,1516699205.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:06.359Z,1516699206.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:06.762Z,1516699206.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:07.169Z,1516699207.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:07.570Z,1516699207.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:07.977Z,1516699207.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:08.377Z,1516699208.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:08.763Z,1516699208.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:09.169Z,1516699209.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:09.562Z,1516699209.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:09.965Z,1516699209.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:10.369Z,1516699210.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:10.778Z,1516699210.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:11.174Z,1516699211.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:11.557Z,1516699211.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:11.965Z,1516699211.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:12.363Z,1516699212.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:12.768Z,1516699212.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:13.166Z,1516699213.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:13.571Z,1516699213.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:13.974Z,1516699213.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:14.371Z,1516699214.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:14.772Z,1516699214.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:15.173Z,1516699215.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:15.572Z,1516699215.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:15.963Z,1516699215.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:16.384Z,1516699216.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:16.783Z,1516699216.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:17.172Z,1516699217.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:17.574Z,1516699217.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:17.966Z,1516699217.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:18.369Z,1516699218.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:18.759Z,1516699218.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:19.172Z,1516699219.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:19.548Z,1516699219.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:19.584Z,1516699219.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:19.959Z,1516699219.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:19.981Z,1516699219.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:20.347Z,1516699220.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:20.384Z,1516699220.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:20.736Z,1516699220.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:20.771Z,1516699220.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:21.136Z,1516699221.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:21.173Z,1516699221.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:21.537Z,1516699221.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:21.552Z,1516699221.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:21.941Z,1516699221.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:21.960Z,1516699221.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:22.351Z,1516699222.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:22.366Z,1516699222.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:22.755Z,1516699222.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:22.770Z,1516699222.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:23.148Z,1516699223.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:23.163Z,1516699223.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:26.238Z,1516699226.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:26.253Z,1516699226.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:26.361Z,1516699226.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:26.395Z,1516699226.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:26.716Z,1516699226.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:26.739Z,1516699226.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:27.127Z,1516699227.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:27.151Z,1516699227.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:27.512Z,1516699227.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:27.526Z,1516699227.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:27.904Z,1516699227.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:27.929Z,1516699227.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:28.312Z,1516699228.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:28.327Z,1516699228.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:28.711Z,1516699228.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:28.725Z,1516699228.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:29.112Z,1516699229.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:29.127Z,1516699229.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:29.517Z,1516699229.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:29.532Z,1516699229.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:29.916Z,1516699229.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:29.931Z,1516699229.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:30.314Z,1516699230.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:30.333Z,1516699230.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:30.713Z,1516699230.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:30.727Z,1516699230.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:31.110Z,1516699231.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:31.125Z,1516699231.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:31.502Z,1516699231.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:31.529Z,1516699231.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:31.911Z,1516699231.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:31.926Z,1516699231.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:32.318Z,1516699232.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:32.333Z,1516699232.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:32.721Z,1516699232.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:32.741Z,1516699232.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:33.118Z,1516699233.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:33.133Z,1516699233.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:33.501Z,1516699233.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:33.532Z,1516699233.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:33.912Z,1516699233.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:33.933Z,1516699233.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:34.320Z,1516699234.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:34.334Z,1516699234.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:34.717Z,1516699234.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:34.740Z,1516699234.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:35.116Z,1516699235.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:35.131Z,1516699235.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:35.499Z,1516699235.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:35.533Z,1516699235.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:35.896Z,1516699235.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:35.926Z,1516699235.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:36.316Z,1516699236.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:36.343Z,1516699236.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:36.719Z,1516699236.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:36.737Z,1516699236.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:37.120Z,1516699237.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:37.134Z,1516699237.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:37.497Z,1516699237.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:37.541Z,1516699237.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:37.901Z,1516699237.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:37.923Z,1516699237.923 [PNI_TCM](ERROR): CRC does not match. Expected:0x33742 got:0x36077 2018-01-23T09:20:37.941Z,1516699237.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:38.312Z,1516699238.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:38.335Z,1516699238.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:38.719Z,1516699238.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:38.734Z,1516699238.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:39.116Z,1516699239.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:39.146Z,1516699239.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:39.501Z,1516699239.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:39.531Z,1516699239.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:39.898Z,1516699239.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:39.933Z,1516699239.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:40.311Z,1516699240.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:40.334Z,1516699240.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:40.711Z,1516699240.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:40.743Z,1516699240.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:41.112Z,1516699241.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:41.144Z,1516699241.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:41.503Z,1516699241.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:41.530Z,1516699241.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:41.903Z,1516699241.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:41.931Z,1516699241.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:42.307Z,1516699242.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:42.353Z,1516699242.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:42.726Z,1516699242.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:42.733Z,1516699242.733 [PNI_TCM](ERROR): CRC does not match. Expected:0x47205 got:0x1857 2018-01-23T09:20:42.753Z,1516699242.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:43.121Z,1516699243.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:43.136Z,1516699243.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:43.499Z,1516699243.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:43.533Z,1516699243.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:43.896Z,1516699243.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:43.935Z,1516699243.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:44.307Z,1516699244.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:44.347Z,1516699244.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:44.721Z,1516699244.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:44.736Z,1516699244.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:45.109Z,1516699245.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:45.144Z,1516699245.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:45.501Z,1516699245.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:45.533Z,1516699245.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:45.896Z,1516699245.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:45.937Z,1516699245.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:46.313Z,1516699246.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:46.340Z,1516699246.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:46.709Z,1516699246.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:46.741Z,1516699246.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:47.107Z,1516699247.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:47.138Z,1516699247.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:47.497Z,1516699247.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:47.544Z,1516699247.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:47.896Z,1516699247.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:47.934Z,1516699247.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:48.309Z,1516699248.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:48.345Z,1516699248.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:48.711Z,1516699248.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:48.743Z,1516699248.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:49.111Z,1516699249.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:49.141Z,1516699249.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:49.498Z,1516699249.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:49.546Z,1516699249.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:49.896Z,1516699249.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:49.945Z,1516699249.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:50.308Z,1516699250.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:50.341Z,1516699250.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:50.721Z,1516699250.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:50.750Z,1516699250.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:51.113Z,1516699251.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:51.142Z,1516699251.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:51.499Z,1516699251.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:51.545Z,1516699251.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:51.908Z,1516699251.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:51.946Z,1516699251.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:52.314Z,1516699252.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:52.350Z,1516699252.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:52.708Z,1516699252.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:52.726Z,1516699252.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:53.110Z,1516699253.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:53.126Z,1516699253.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:53.505Z,1516699253.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:53.555Z,1516699253.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:53.907Z,1516699253.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:53.922Z,1516699253.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:54.311Z,1516699254.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:54.329Z,1516699254.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:54.714Z,1516699254.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:54.729Z,1516699254.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:55.112Z,1516699255.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:55.156Z,1516699255.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:55.504Z,1516699255.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:55.524Z,1516699255.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:55.905Z,1516699255.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:55.922Z,1516699255.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:56.310Z,1516699256.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:56.329Z,1516699256.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:56.713Z,1516699256.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:56.755Z,1516699256.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:57.114Z,1516699257.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:57.129Z,1516699257.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:57.501Z,1516699257.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:57.521Z,1516699257.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:57.901Z,1516699257.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:57.933Z,1516699257.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:58.309Z,1516699258.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:58.323Z,1516699258.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:58.714Z,1516699258.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:58.729Z,1516699258.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:59.118Z,1516699259.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:59.137Z,1516699259.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:59.517Z,1516699259.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:59.534Z,1516699259.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:20:59.908Z,1516699259.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:20:59.960Z,1516699259.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:00.308Z,1516699260.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:00.329Z,1516699260.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:00.714Z,1516699260.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:00.732Z,1516699260.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:01.109Z,1516699261.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:01.128Z,1516699261.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:01.514Z,1516699261.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:01.529Z,1516699261.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:01.918Z,1516699261.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:01.937Z,1516699261.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:02.314Z,1516699262.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:02.333Z,1516699262.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:02.700Z,1516699262.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:02.726Z,1516699262.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:03.105Z,1516699263.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:03.124Z,1516699263.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:03.494Z,1516699263.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:03.525Z,1516699263.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:03.909Z,1516699263.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:03.924Z,1516699263.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:04.296Z,1516699264.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:04.335Z,1516699264.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:04.712Z,1516699264.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:04.739Z,1516699264.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:05.123Z,1516699265.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:05.138Z,1516699265.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:05.519Z,1516699265.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:05.536Z,1516699265.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:05.894Z,1516699265.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:05.926Z,1516699265.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:06.300Z,1516699266.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:06.326Z,1516699266.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:06.697Z,1516699266.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:06.733Z,1516699266.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:07.100Z,1516699267.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:07.126Z,1516699267.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:07.515Z,1516699267.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:07.534Z,1516699267.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:07.920Z,1516699267.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:07.934Z,1516699267.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:08.312Z,1516699268.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:08.335Z,1516699268.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:08.696Z,1516699268.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:08.733Z,1516699268.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:09.096Z,1516699269.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:09.130Z,1516699269.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:09.494Z,1516699269.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:09.517Z,1516699269.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:09.897Z,1516699269.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:09.924Z,1516699269.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:10.296Z,1516699270.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:10.342Z,1516699270.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:10.707Z,1516699270.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:10.736Z,1516699270.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:11.111Z,1516699271.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:11.146Z,1516699271.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:11.507Z,1516699271.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:11.537Z,1516699271.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:11.894Z,1516699271.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:11.909Z,1516699271.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:12.296Z,1516699272.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:12.313Z,1516699272.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:12.705Z,1516699272.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:12.720Z,1516699272.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:13.102Z,1516699273.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:13.125Z,1516699273.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:13.507Z,1516699273.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:13.522Z,1516699273.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:13.911Z,1516699273.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:13.933Z,1516699273.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:14.307Z,1516699274.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:14.322Z,1516699274.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:14.703Z,1516699274.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:14.718Z,1516699274.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:15.104Z,1516699275.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:15.119Z,1516699275.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:15.502Z,1516699275.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:15.522Z,1516699275.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:15.908Z,1516699275.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:15.929Z,1516699275.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:16.305Z,1516699276.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:16.320Z,1516699276.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:16.709Z,1516699276.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:16.729Z,1516699276.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:17.111Z,1516699277.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:17.126Z,1516699277.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:17.510Z,1516699277.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:17.525Z,1516699277.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:17.904Z,1516699277.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:17.919Z,1516699277.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:18.300Z,1516699278.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:18.329Z,1516699278.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:18.723Z,1516699278.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:19.119Z,1516699279.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:19.529Z,1516699279.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:19.926Z,1516699279.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:20.329Z,1516699280.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:20.724Z,1516699280.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:21.123Z,1516699281.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:21.525Z,1516699281.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:21.921Z,1516699281.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:22.320Z,1516699282.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:22.729Z,1516699282.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:23.126Z,1516699283.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:23.526Z,1516699283.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:26.619Z,1516699286.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:26.769Z,1516699286.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:27.107Z,1516699287.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:27.506Z,1516699287.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:27.908Z,1516699287.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:28.289Z,1516699288.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:28.683Z,1516699288.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:29.086Z,1516699289.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:29.490Z,1516699289.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:29.889Z,1516699289.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:30.292Z,1516699290.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:30.683Z,1516699290.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:31.083Z,1516699291.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:31.482Z,1516699291.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:31.893Z,1516699291.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:32.283Z,1516699292.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:32.693Z,1516699292.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:33.090Z,1516699293.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:33.492Z,1516699293.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:33.889Z,1516699293.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:34.292Z,1516699294.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:34.684Z,1516699294.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:35.082Z,1516699295.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:35.501Z,1516699295.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:35.892Z,1516699295.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:36.297Z,1516699296.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:36.693Z,1516699296.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:37.083Z,1516699297.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:37.482Z,1516699297.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:37.886Z,1516699297.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:38.291Z,1516699298.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:38.693Z,1516699298.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:39.097Z,1516699299.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:39.494Z,1516699299.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:39.887Z,1516699299.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:40.292Z,1516699300.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:40.688Z,1516699300.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:41.089Z,1516699301.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:41.494Z,1516699301.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:41.904Z,1516699301.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:42.297Z,1516699302.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:42.692Z,1516699302.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:43.092Z,1516699303.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:43.491Z,1516699303.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:43.891Z,1516699303.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:44.293Z,1516699304.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:44.695Z,1516699304.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:45.097Z,1516699305.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:45.498Z,1516699305.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:45.885Z,1516699305.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:46.293Z,1516699306.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:46.686Z,1516699306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:47.093Z,1516699307.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:47.494Z,1516699307.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:47.908Z,1516699307.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:48.298Z,1516699308.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:48.689Z,1516699308.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:49.085Z,1516699309.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:49.500Z,1516699309.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:49.888Z,1516699309.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:50.296Z,1516699310.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:50.703Z,1516699310.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:51.101Z,1516699311.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:51.504Z,1516699311.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:51.895Z,1516699311.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:52.295Z,1516699312.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:52.684Z,1516699312.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:53.097Z,1516699313.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:53.501Z,1516699313.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:53.909Z,1516699313.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:54.298Z,1516699314.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:54.685Z,1516699314.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:55.080Z,1516699315.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:55.476Z,1516699315.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:55.888Z,1516699315.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:56.270Z,1516699316.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:56.289Z,1516699316.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:56.671Z,1516699316.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:56.687Z,1516699316.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:57.075Z,1516699317.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:57.090Z,1516699317.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:57.475Z,1516699317.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:57.490Z,1516699317.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:57.866Z,1516699317.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:57.894Z,1516699317.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:58.271Z,1516699318.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:58.286Z,1516699318.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:58.665Z,1516699318.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:58.688Z,1516699318.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:59.069Z,1516699319.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:59.085Z,1516699319.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:59.478Z,1516699319.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:21:59.494Z,1516699319.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:21:59.898Z,1516699319.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:00.293Z,1516699320.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:00.687Z,1516699320.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:01.068Z,1516699321.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:01.095Z,1516699321.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:01.472Z,1516699321.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:01.491Z,1516699321.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:01.861Z,1516699321.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:01.894Z,1516699321.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:02.261Z,1516699322.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:02.297Z,1516699322.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:02.684Z,1516699322.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:02.699Z,1516699322.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:03.091Z,1516699323.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:03.106Z,1516699323.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:03.481Z,1516699323.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:03.496Z,1516699323.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:03.862Z,1516699323.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:03.889Z,1516699323.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:04.262Z,1516699324.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:04.289Z,1516699324.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:04.663Z,1516699324.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:04.678Z,1516699324.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:05.061Z,1516699325.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:05.101Z,1516699325.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:05.480Z,1516699325.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:05.506Z,1516699325.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:05.881Z,1516699325.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:05.902Z,1516699325.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:06.281Z,1516699326.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:06.313Z,1516699326.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:06.674Z,1516699326.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:06.709Z,1516699326.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:07.065Z,1516699327.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:07.081Z,1516699327.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:07.466Z,1516699327.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:07.493Z,1516699327.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:07.871Z,1516699327.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:07.887Z,1516699327.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:08.268Z,1516699328.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:08.289Z,1516699328.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:08.671Z,1516699328.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:08.687Z,1516699328.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:09.075Z,1516699329.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:09.098Z,1516699329.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:09.474Z,1516699329.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:09.489Z,1516699329.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:09.868Z,1516699329.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:09.883Z,1516699329.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:10.268Z,1516699330.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:10.283Z,1516699330.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:10.669Z,1516699330.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:10.684Z,1516699330.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:11.068Z,1516699331.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:11.083Z,1516699331.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:11.473Z,1516699331.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:11.493Z,1516699331.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:11.878Z,1516699331.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:11.893Z,1516699331.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:12.278Z,1516699332.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:12.296Z,1516699332.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:12.673Z,1516699332.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:12.688Z,1516699332.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:13.069Z,1516699333.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:13.088Z,1516699333.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:13.478Z,1516699333.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:13.497Z,1516699333.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:13.879Z,1516699333.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:13.894Z,1516699333.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:14.278Z,1516699334.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:14.300Z,1516699334.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:14.673Z,1516699334.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:14.688Z,1516699334.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:15.064Z,1516699335.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:15.091Z,1516699335.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:15.483Z,1516699335.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:15.497Z,1516699335.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:15.882Z,1516699335.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:15.905Z,1516699335.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:16.279Z,1516699336.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:16.294Z,1516699336.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:16.661Z,1516699336.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:16.696Z,1516699336.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:17.062Z,1516699337.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:17.089Z,1516699337.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:17.476Z,1516699337.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:17.503Z,1516699337.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:17.884Z,1516699337.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:17.898Z,1516699337.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:18.283Z,1516699338.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:18.298Z,1516699338.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:18.661Z,1516699338.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:18.693Z,1516699338.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:19.060Z,1516699339.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:19.089Z,1516699339.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:19.480Z,1516699339.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:19.495Z,1516699339.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:19.880Z,1516699339.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:19.911Z,1516699339.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:20.270Z,1516699340.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:20.296Z,1516699340.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:20.665Z,1516699340.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:20.691Z,1516699340.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:21.060Z,1516699341.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:21.092Z,1516699341.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:21.481Z,1516699341.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:21.495Z,1516699341.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:21.887Z,1516699341.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:21.902Z,1516699341.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:22.275Z,1516699342.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:22.298Z,1516699342.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:22.670Z,1516699342.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:22.696Z,1516699342.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:23.064Z,1516699343.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:23.090Z,1516699343.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:23.475Z,1516699343.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:23.497Z,1516699343.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:23.884Z,1516699343.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:23.898Z,1516699343.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:26.977Z,1516699346.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:26.992Z,1516699346.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:27.090Z,1516699347.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:27.137Z,1516699347.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:27.440Z,1516699347.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:27.454Z,1516699347.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:27.847Z,1516699347.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:27.862Z,1516699347.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:28.240Z,1516699348.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:28.255Z,1516699348.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:28.646Z,1516699348.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:22:28.661Z,1516699348.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:29.062Z,1516699349.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:29.062Z,1516699349.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122 2018-01-23T09:22:29.062Z,1516699349.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:22:29.064Z,1516699349.064 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:29.064Z,1516699349.064 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122 2018-01-23T09:22:29.064Z,1516699349.064 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:22:29.066Z,1516699349.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:29.066Z,1516699349.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122 2018-01-23T09:22:29.066Z,1516699349.066 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:22:29.105Z,1516699349.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:22:29.106Z,1516699349.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:22:29.106Z,1516699349.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:22:29.495Z,1516699349.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:22:29.495Z,1516699349.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122 2018-01-23T09:22:29.496Z,1516699349.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:22:29.496Z,1516699349.496 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122 2018-01-23T09:22:29.496Z,1516699349.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:22:29.496Z,1516699349.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122 2018-01-23T09:22:29.856Z,1516699349.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:22:29.857Z,1516699349.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:22:29.857Z,1516699349.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:22:29.858Z,1516699349.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:22:29.858Z,1516699349.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:22:29.858Z,1516699349.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:22:29.859Z,1516699349.859 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:22:29.859Z,1516699349.859 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:22:29.860Z,1516699349.860 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:22:30.272Z,1516699350.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:22:30.273Z,1516699350.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:30.663Z,1516699350.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:22:30.664Z,1516699350.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:31.064Z,1516699351.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:22:31.065Z,1516699351.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:31.468Z,1516699351.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:22:31.469Z,1516699351.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:31.866Z,1516699351.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:22:31.867Z,1516699351.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:32.274Z,1516699352.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:22:32.279Z,1516699352.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:32.680Z,1516699352.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:22:32.681Z,1516699352.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:33.068Z,1516699353.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:22:33.069Z,1516699353.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:33.472Z,1516699353.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:22:33.473Z,1516699353.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:33.856Z,1516699353.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:22:33.857Z,1516699353.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:34.252Z,1516699354.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:22:34.253Z,1516699354.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:34.678Z,1516699354.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:22:34.679Z,1516699354.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:35.080Z,1516699355.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:22:35.081Z,1516699355.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:35.477Z,1516699355.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:22:35.478Z,1516699355.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:35.858Z,1516699355.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:22:35.859Z,1516699355.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:36.258Z,1516699356.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:22:36.259Z,1516699356.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:36.656Z,1516699356.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:22:36.657Z,1516699356.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:37.064Z,1516699357.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:22:37.065Z,1516699357.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:37.457Z,1516699357.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:22:37.458Z,1516699357.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:37.858Z,1516699357.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:22:37.859Z,1516699357.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:38.269Z,1516699358.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:22:38.270Z,1516699358.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:38.665Z,1516699358.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:22:38.666Z,1516699358.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:39.057Z,1516699359.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:22:39.058Z,1516699359.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:39.463Z,1516699359.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:22:39.464Z,1516699359.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:39.860Z,1516699359.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:22:39.861Z,1516699359.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:40.264Z,1516699360.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:22:40.265Z,1516699360.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:40.666Z,1516699360.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:22:40.667Z,1516699360.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:41.066Z,1516699361.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:22:41.068Z,1516699361.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:41.472Z,1516699361.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:22:41.473Z,1516699361.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:41.857Z,1516699361.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:22:41.858Z,1516699361.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:42.268Z,1516699362.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:22:42.269Z,1516699362.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:42.658Z,1516699362.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:22:42.660Z,1516699362.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:43.058Z,1516699363.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:22:43.060Z,1516699363.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:43.456Z,1516699363.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:22:43.457Z,1516699363.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:43.866Z,1516699363.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:22:43.867Z,1516699363.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:44.270Z,1516699364.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:22:44.272Z,1516699364.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:44.666Z,1516699364.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:22:44.667Z,1516699364.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:45.057Z,1516699365.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:22:45.058Z,1516699365.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:45.466Z,1516699365.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:22:45.467Z,1516699365.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:45.856Z,1516699365.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:22:45.857Z,1516699365.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:46.256Z,1516699366.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:22:46.257Z,1516699366.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:46.665Z,1516699366.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:22:46.666Z,1516699366.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:47.073Z,1516699367.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:22:47.074Z,1516699367.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:47.477Z,1516699367.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:22:47.478Z,1516699367.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:47.860Z,1516699367.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:22:47.861Z,1516699367.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:48.266Z,1516699368.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:22:48.267Z,1516699368.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:48.664Z,1516699368.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:22:48.665Z,1516699368.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:49.063Z,1516699369.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:49.465Z,1516699369.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:49.866Z,1516699369.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:50.269Z,1516699370.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:50.674Z,1516699370.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:51.063Z,1516699371.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:51.465Z,1516699371.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:51.863Z,1516699371.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:52.265Z,1516699372.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:52.666Z,1516699372.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:53.076Z,1516699373.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:53.470Z,1516699373.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:53.869Z,1516699373.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:54.268Z,1516699374.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:54.667Z,1516699374.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:55.067Z,1516699375.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:55.468Z,1516699375.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:55.870Z,1516699375.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:56.273Z,1516699376.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:56.666Z,1516699376.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:57.067Z,1516699377.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:57.467Z,1516699377.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:57.867Z,1516699377.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:58.267Z,1516699378.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:58.675Z,1516699378.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:59.076Z,1516699379.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:59.470Z,1516699379.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:22:59.867Z,1516699379.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:00.267Z,1516699380.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:00.667Z,1516699380.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:01.060Z,1516699381.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:01.446Z,1516699381.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:01.874Z,1516699381.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:02.277Z,1516699382.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:02.680Z,1516699382.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:03.052Z,1516699383.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:03.452Z,1516699383.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:03.852Z,1516699383.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:04.277Z,1516699384.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:04.683Z,1516699384.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:05.082Z,1516699385.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:05.484Z,1516699385.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:05.881Z,1516699385.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:06.251Z,1516699386.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:06.656Z,1516699386.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:07.055Z,1516699387.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:07.461Z,1516699387.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:07.862Z,1516699387.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:08.286Z,1516699388.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:08.661Z,1516699388.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:09.055Z,1516699389.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:09.455Z,1516699389.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:09.864Z,1516699389.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:10.255Z,1516699390.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:10.662Z,1516699390.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:11.087Z,1516699391.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:11.486Z,1516699391.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:11.860Z,1516699391.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:12.255Z,1516699392.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:12.656Z,1516699392.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:13.054Z,1516699393.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:13.460Z,1516699393.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:13.885Z,1516699393.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:14.262Z,1516699394.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:14.658Z,1516699394.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:15.065Z,1516699395.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:15.465Z,1516699395.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:15.858Z,1516699395.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:16.260Z,1516699396.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:16.672Z,1516699396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:17.066Z,1516699397.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:17.466Z,1516699397.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:17.858Z,1516699397.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:18.259Z,1516699398.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:18.657Z,1516699398.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:19.060Z,1516699399.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:19.469Z,1516699399.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:19.873Z,1516699399.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:20.266Z,1516699400.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:20.672Z,1516699400.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:21.059Z,1516699401.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:21.456Z,1516699401.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:21.460Z,1516699401.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:18:21.2Z 2018-01-23T09:23:21.460Z,1516699401.460 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:23:21.460Z,1516699401.460 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:23:21.865Z,1516699401.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:22.377Z,1516699402.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:22.667Z,1516699402.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:25.806Z,1516699405.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:25.888Z,1516699405.888 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0144.lzma 2018-01-23T09:23:25.961Z,1516699405.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:26.270Z,1516699406.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:27.066Z,1516699407.066 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0144.lzma.bak 2018-01-23T09:23:27.067Z,1516699407.067 [DataOverHttps](INFO): SBD MOMSN=7755345 2018-01-23T09:23:27.119Z,1516699407.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:27.481Z,1516699407.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:27.637Z,1516699407.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:30.686Z,1516699410.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:30.837Z,1516699410.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:31.182Z,1516699411.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:31.581Z,1516699411.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:31.979Z,1516699411.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:32.389Z,1516699412.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:35.479Z,1516699415.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:35.556Z,1516699415.556 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20180123T031358/Express0145.lzma 2018-01-23T09:23:35.637Z,1516699415.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:35.963Z,1516699415.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:36.309Z,1516699416.309 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0145.lzma.bak 2018-01-23T09:23:36.310Z,1516699416.310 [DataOverHttps](INFO): SBD MOMSN=7755347 2018-01-23T09:23:36.376Z,1516699416.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:36.990Z,1516699416.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:37.011Z,1516699417.011 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:23:37.011Z,1516699417.011 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:23:37.011Z,1516699417.011 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:23:37.165Z,1516699417.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:40.280Z,1516699420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:40.425Z,1516699420.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:40.767Z,1516699420.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:41.173Z,1516699421.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:41.537Z,1516699421.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:41.945Z,1516699421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:42.342Z,1516699422.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:42.746Z,1516699422.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:43.165Z,1516699423.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:43.565Z,1516699423.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:43.944Z,1516699423.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:44.343Z,1516699424.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:44.742Z,1516699424.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:45.144Z,1516699425.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:45.543Z,1516699425.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:45.949Z,1516699425.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:46.346Z,1516699426.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:46.774Z,1516699426.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:47.149Z,1516699427.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:47.541Z,1516699427.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:47.943Z,1516699427.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:48.352Z,1516699428.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:48.746Z,1516699428.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:49.154Z,1516699429.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:49.556Z,1516699429.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:49.944Z,1516699429.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:50.343Z,1516699430.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:50.742Z,1516699430.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:51.142Z,1516699431.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:51.545Z,1516699431.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:51.954Z,1516699431.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:52.354Z,1516699432.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:52.753Z,1516699432.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:53.149Z,1516699433.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:53.545Z,1516699433.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:53.949Z,1516699433.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:54.345Z,1516699434.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:54.754Z,1516699434.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:55.157Z,1516699435.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:55.558Z,1516699435.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:55.945Z,1516699435.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:56.351Z,1516699436.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:56.754Z,1516699436.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:57.150Z,1516699437.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:57.549Z,1516699437.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:57.955Z,1516699437.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:58.355Z,1516699438.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:58.764Z,1516699438.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:59.145Z,1516699439.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:59.549Z,1516699439.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:23:59.952Z,1516699439.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:00.349Z,1516699440.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:00.754Z,1516699440.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:01.159Z,1516699441.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:01.555Z,1516699441.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:01.953Z,1516699441.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:02.355Z,1516699442.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:02.755Z,1516699442.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:03.154Z,1516699443.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:03.555Z,1516699443.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:03.963Z,1516699443.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:04.361Z,1516699444.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:04.762Z,1516699444.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:05.156Z,1516699445.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:05.557Z,1516699445.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:05.961Z,1516699445.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:06.356Z,1516699446.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:06.769Z,1516699446.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:07.163Z,1516699447.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:07.560Z,1516699447.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:07.949Z,1516699447.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:08.358Z,1516699448.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:08.735Z,1516699448.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:09.166Z,1516699449.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:09.550Z,1516699449.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:09.973Z,1516699449.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:10.354Z,1516699450.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:10.748Z,1516699450.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:11.143Z,1516699451.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:11.576Z,1516699451.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:11.942Z,1516699451.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:12.353Z,1516699452.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:12.746Z,1516699452.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:13.150Z,1516699453.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:13.548Z,1516699453.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:13.937Z,1516699453.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:14.353Z,1516699454.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:14.736Z,1516699454.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:15.153Z,1516699455.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:15.537Z,1516699455.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:15.950Z,1516699455.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:16.357Z,1516699456.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:16.761Z,1516699456.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:17.148Z,1516699457.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:17.549Z,1516699457.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:17.953Z,1516699457.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:18.347Z,1516699458.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:18.755Z,1516699458.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:19.157Z,1516699459.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:19.170Z,1516699459.170 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:24:19.564Z,1516699459.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:19.953Z,1516699459.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:20.355Z,1516699460.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:20.756Z,1516699460.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:21.152Z,1516699461.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:21.559Z,1516699461.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:21.959Z,1516699461.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:22.367Z,1516699462.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:22.764Z,1516699462.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:23.164Z,1516699463.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:23.533Z,1516699463.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:23.936Z,1516699463.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:24.339Z,1516699464.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:24.766Z,1516699464.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:25.150Z,1516699465.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:25.549Z,1516699465.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:25.943Z,1516699465.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:26.343Z,1516699466.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:26.748Z,1516699466.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:27.147Z,1516699467.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:27.542Z,1516699467.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:27.956Z,1516699467.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:28.353Z,1516699468.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:28.750Z,1516699468.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:29.148Z,1516699469.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:29.542Z,1516699469.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:29.944Z,1516699469.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:30.347Z,1516699470.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:30.753Z,1516699470.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:31.154Z,1516699471.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:31.549Z,1516699471.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:31.943Z,1516699471.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:32.347Z,1516699472.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:32.730Z,1516699472.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:32.745Z,1516699472.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:33.128Z,1516699473.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:33.146Z,1516699473.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:33.533Z,1516699473.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:33.548Z,1516699473.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:33.935Z,1516699473.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:33.950Z,1516699473.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:34.333Z,1516699474.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:34.353Z,1516699474.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:34.736Z,1516699474.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:34.751Z,1516699474.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:35.130Z,1516699475.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:35.145Z,1516699475.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:35.528Z,1516699475.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:35.543Z,1516699475.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:35.928Z,1516699475.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:35.946Z,1516699475.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:36.329Z,1516699476.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:36.344Z,1516699476.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:36.733Z,1516699476.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:36.753Z,1516699476.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:37.139Z,1516699477.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:37.154Z,1516699477.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:37.536Z,1516699477.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:37.550Z,1516699477.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:40.618Z,1516699480.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:40.637Z,1516699480.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:40.741Z,1516699480.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:40.756Z,1516699480.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:41.105Z,1516699481.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:41.133Z,1516699481.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:41.503Z,1516699481.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:41.530Z,1516699481.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:41.907Z,1516699481.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:41.931Z,1516699481.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:42.291Z,1516699482.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:42.314Z,1516699482.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:42.697Z,1516699482.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:42.712Z,1516699482.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:43.090Z,1516699483.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:43.114Z,1516699483.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:43.486Z,1516699483.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:24:43.510Z,1516699483.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:43.919Z,1516699483.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:44.322Z,1516699484.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:44.725Z,1516699484.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:45.112Z,1516699485.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:45.506Z,1516699485.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:45.910Z,1516699485.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:46.320Z,1516699486.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:46.722Z,1516699486.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:47.125Z,1516699487.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:47.526Z,1516699487.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:47.909Z,1516699487.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:48.325Z,1516699488.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:48.722Z,1516699488.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:49.123Z,1516699489.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:49.519Z,1516699489.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:49.910Z,1516699489.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:50.315Z,1516699490.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:50.733Z,1516699490.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:51.118Z,1516699491.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x2457 got:0x49317 2018-01-23T09:24:51.137Z,1516699491.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:51.518Z,1516699491.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:51.908Z,1516699491.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:52.315Z,1516699492.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:52.720Z,1516699492.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:53.122Z,1516699493.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:53.521Z,1516699493.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:53.929Z,1516699493.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:54.312Z,1516699494.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:54.719Z,1516699494.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:55.121Z,1516699495.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:55.533Z,1516699495.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:55.913Z,1516699495.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:56.305Z,1516699496.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:56.729Z,1516699496.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:57.133Z,1516699497.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:57.525Z,1516699497.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:57.919Z,1516699497.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:58.320Z,1516699498.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:58.727Z,1516699498.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:59.130Z,1516699499.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:59.528Z,1516699499.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:24:59.921Z,1516699499.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:00.328Z,1516699500.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:00.726Z,1516699500.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:01.123Z,1516699501.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:01.526Z,1516699501.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:01.917Z,1516699501.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:02.325Z,1516699502.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:02.725Z,1516699502.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:03.136Z,1516699503.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:03.528Z,1516699503.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:03.925Z,1516699503.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:04.328Z,1516699504.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:04.721Z,1516699504.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:05.131Z,1516699505.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:05.529Z,1516699505.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:05.920Z,1516699505.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:06.326Z,1516699506.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:06.735Z,1516699506.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:07.130Z,1516699507.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:07.529Z,1516699507.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:07.933Z,1516699507.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:08.325Z,1516699508.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:08.730Z,1516699508.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:09.134Z,1516699509.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:09.533Z,1516699509.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:09.940Z,1516699509.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:10.307Z,1516699510.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:10.731Z,1516699510.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:11.114Z,1516699511.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:11.518Z,1516699511.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:11.907Z,1516699511.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:12.305Z,1516699512.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:12.712Z,1516699512.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:13.113Z,1516699513.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:13.517Z,1516699513.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:13.913Z,1516699513.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:14.310Z,1516699514.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:14.709Z,1516699514.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:15.112Z,1516699515.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:15.507Z,1516699515.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:15.916Z,1516699515.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:16.318Z,1516699516.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:16.714Z,1516699516.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:17.118Z,1516699517.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:17.506Z,1516699517.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:17.914Z,1516699517.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:18.313Z,1516699518.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:18.710Z,1516699518.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:19.121Z,1516699519.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:19.529Z,1516699519.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:19.917Z,1516699519.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:20.315Z,1516699520.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:20.717Z,1516699520.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:21.113Z,1516699521.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:21.513Z,1516699521.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:21.921Z,1516699521.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:22.334Z,1516699522.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:22.729Z,1516699522.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:23.125Z,1516699523.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:23.525Z,1516699523.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:23.930Z,1516699523.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:24.305Z,1516699524.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:24.703Z,1516699524.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:25.136Z,1516699525.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:25.541Z,1516699525.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:25.910Z,1516699525.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:26.306Z,1516699526.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:26.709Z,1516699526.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:27.104Z,1516699527.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:27.503Z,1516699527.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:27.910Z,1516699527.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:28.316Z,1516699528.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:28.717Z,1516699528.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.105Z,1516699529.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.505Z,1516699529.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.905Z,1516699529.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.905Z,1516699529.905 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123 2018-01-23T09:25:29.905Z,1516699529.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:25:29.907Z,1516699529.907 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.907Z,1516699529.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 123 2018-01-23T09:25:29.907Z,1516699529.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:25:29.909Z,1516699529.909 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:29.909Z,1516699529.909 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123 2018-01-23T09:25:29.909Z,1516699529.909 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:25:29.921Z,1516699529.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:25:29.921Z,1516699529.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:25:29.922Z,1516699529.922 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:25:30.335Z,1516699530.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:25:30.335Z,1516699530.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123 2018-01-23T09:25:30.336Z,1516699530.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:25:30.336Z,1516699530.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 123 2018-01-23T09:25:30.337Z,1516699530.337 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:25:30.337Z,1516699530.337 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123 2018-01-23T09:25:30.681Z,1516699530.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:30.717Z,1516699530.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:25:30.717Z,1516699530.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:25:30.717Z,1516699530.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:25:30.718Z,1516699530.718 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:25:30.718Z,1516699530.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:25:30.719Z,1516699530.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:25:30.719Z,1516699530.719 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:25:30.719Z,1516699530.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:25:30.720Z,1516699530.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:25:31.092Z,1516699531.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:31.118Z,1516699531.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:25:31.121Z,1516699531.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:31.494Z,1516699531.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:31.525Z,1516699531.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:25:31.526Z,1516699531.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:31.926Z,1516699531.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:25:31.927Z,1516699531.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:32.304Z,1516699532.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:25:32.305Z,1516699532.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:32.732Z,1516699532.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:25:32.733Z,1516699532.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:33.086Z,1516699533.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:33.100Z,1516699533.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:25:33.101Z,1516699533.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:33.486Z,1516699533.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:33.505Z,1516699533.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:25:33.505Z,1516699533.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:33.895Z,1516699533.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:25:33.910Z,1516699533.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:25:33.911Z,1516699533.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:34.309Z,1516699534.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:25:34.310Z,1516699534.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:34.735Z,1516699534.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:25:34.736Z,1516699534.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:35.101Z,1516699535.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:25:35.103Z,1516699535.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:35.508Z,1516699535.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:25:35.509Z,1516699535.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:35.904Z,1516699535.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:25:35.905Z,1516699535.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:36.303Z,1516699536.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:25:36.304Z,1516699536.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:36.708Z,1516699536.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:25:36.709Z,1516699536.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:37.106Z,1516699537.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:25:37.107Z,1516699537.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:37.509Z,1516699537.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:25:37.510Z,1516699537.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:37.906Z,1516699537.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:25:37.907Z,1516699537.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:40.998Z,1516699540.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T09:25:40.999Z,1516699540.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:41.132Z,1516699541.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:25:41.133Z,1516699541.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:41.485Z,1516699541.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:25:41.486Z,1516699541.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:41.889Z,1516699541.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:25:41.890Z,1516699541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:42.286Z,1516699542.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:25:42.291Z,1516699542.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:42.664Z,1516699542.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:25:42.665Z,1516699542.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:43.068Z,1516699543.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:25:43.069Z,1516699543.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:43.468Z,1516699543.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:25:43.469Z,1516699543.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:43.866Z,1516699543.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:25:43.867Z,1516699543.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:44.269Z,1516699544.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:25:44.270Z,1516699544.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:44.712Z,1516699544.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:25:44.713Z,1516699544.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:45.110Z,1516699545.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:25:45.120Z,1516699545.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:45.532Z,1516699545.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:25:45.533Z,1516699545.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:45.932Z,1516699545.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:25:45.933Z,1516699545.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:46.344Z,1516699546.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:25:46.345Z,1516699546.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:46.689Z,1516699546.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:25:46.690Z,1516699546.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:47.089Z,1516699547.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:25:47.090Z,1516699547.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:47.504Z,1516699547.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:25:47.505Z,1516699547.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:47.936Z,1516699547.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:25:47.937Z,1516699547.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:48.293Z,1516699548.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:25:48.294Z,1516699548.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:48.718Z,1516699548.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:25:48.744Z,1516699548.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:49.161Z,1516699549.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T09:25:49.162Z,1516699549.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:49.516Z,1516699549.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:25:49.517Z,1516699549.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:49.976Z,1516699549.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:50.300Z,1516699550.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:50.682Z,1516699550.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:51.088Z,1516699551.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:51.513Z,1516699551.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:51.889Z,1516699551.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:52.277Z,1516699552.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:52.693Z,1516699552.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:53.092Z,1516699553.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:53.533Z,1516699553.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:53.886Z,1516699553.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:54.308Z,1516699554.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:54.697Z,1516699554.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:55.097Z,1516699555.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:55.469Z,1516699555.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:55.905Z,1516699555.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:56.293Z,1516699556.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:56.732Z,1516699556.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:57.096Z,1516699557.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:57.496Z,1516699557.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:57.882Z,1516699557.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:58.292Z,1516699558.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:58.721Z,1516699558.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:59.164Z,1516699559.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:59.502Z,1516699559.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:25:59.914Z,1516699559.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:00.309Z,1516699560.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:00.673Z,1516699560.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:01.100Z,1516699561.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:01.470Z,1516699561.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:01.893Z,1516699561.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:02.293Z,1516699562.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:02.685Z,1516699562.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:03.081Z,1516699563.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:03.488Z,1516699563.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:03.889Z,1516699563.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:04.309Z,1516699564.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:04.692Z,1516699564.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:05.106Z,1516699565.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:05.501Z,1516699565.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:05.878Z,1516699565.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:06.281Z,1516699566.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:06.661Z,1516699566.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:07.063Z,1516699567.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:07.460Z,1516699567.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:07.884Z,1516699567.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:08.283Z,1516699568.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:08.682Z,1516699568.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:09.085Z,1516699569.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:09.469Z,1516699569.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:09.863Z,1516699569.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:10.272Z,1516699570.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:10.664Z,1516699570.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:11.078Z,1516699571.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:11.474Z,1516699571.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:11.873Z,1516699571.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:12.262Z,1516699572.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:12.662Z,1516699572.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:13.064Z,1516699573.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:13.462Z,1516699573.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:13.877Z,1516699573.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:14.272Z,1516699574.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:14.676Z,1516699574.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:15.064Z,1516699575.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:15.473Z,1516699575.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:15.877Z,1516699575.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:16.274Z,1516699576.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:16.681Z,1516699576.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:17.066Z,1516699577.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:17.473Z,1516699577.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:17.873Z,1516699577.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:18.277Z,1516699578.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:18.677Z,1516699578.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:19.068Z,1516699579.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:19.466Z,1516699579.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:19.873Z,1516699579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:20.276Z,1516699580.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:20.677Z,1516699580.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:21.068Z,1516699581.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:21.463Z,1516699581.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:21.873Z,1516699581.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:22.277Z,1516699582.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:22.673Z,1516699582.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:23.065Z,1516699583.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:23.462Z,1516699583.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:23.873Z,1516699583.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:24.274Z,1516699584.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:24.679Z,1516699584.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:25.068Z,1516699585.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:25.473Z,1516699585.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:25.877Z,1516699585.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:26.273Z,1516699586.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:26.677Z,1516699586.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:27.068Z,1516699587.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:27.463Z,1516699587.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:27.877Z,1516699587.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:28.274Z,1516699588.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:28.674Z,1516699588.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:29.066Z,1516699589.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:29.463Z,1516699589.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:29.875Z,1516699589.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:30.281Z,1516699590.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:30.674Z,1516699590.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:31.067Z,1516699591.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:31.469Z,1516699591.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:31.873Z,1516699591.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:32.276Z,1516699592.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:32.673Z,1516699592.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:33.067Z,1516699593.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:33.470Z,1516699593.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:33.881Z,1516699593.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:34.278Z,1516699594.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:34.675Z,1516699594.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:35.068Z,1516699595.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:35.467Z,1516699595.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:35.876Z,1516699595.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:36.281Z,1516699596.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:36.681Z,1516699596.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:37.068Z,1516699597.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:37.461Z,1516699597.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:37.874Z,1516699597.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:38.278Z,1516699598.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:41.385Z,1516699601.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:41.517Z,1516699601.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:41.876Z,1516699601.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:42.282Z,1516699602.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:42.675Z,1516699602.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:43.085Z,1516699603.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:43.485Z,1516699603.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:43.884Z,1516699603.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:44.281Z,1516699604.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:44.688Z,1516699604.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:45.076Z,1516699605.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:45.484Z,1516699605.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:45.885Z,1516699605.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:46.284Z,1516699606.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:46.697Z,1516699606.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:47.084Z,1516699607.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:47.479Z,1516699607.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:47.890Z,1516699607.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:48.294Z,1516699608.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:48.686Z,1516699608.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:49.088Z,1516699609.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:49.465Z,1516699609.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:49.892Z,1516699609.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:50.297Z,1516699610.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:50.689Z,1516699610.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:51.068Z,1516699611.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:51.472Z,1516699611.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:51.894Z,1516699611.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:52.299Z,1516699612.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:52.704Z,1516699612.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:53.076Z,1516699613.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:53.471Z,1516699613.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:53.901Z,1516699613.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:54.300Z,1516699614.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:54.701Z,1516699614.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:55.079Z,1516699615.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:55.473Z,1516699615.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:55.881Z,1516699615.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:56.285Z,1516699616.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:56.678Z,1516699616.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:57.076Z,1516699617.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:57.480Z,1516699617.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:57.878Z,1516699617.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:58.282Z,1516699618.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:58.707Z,1516699618.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:59.077Z,1516699619.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:59.485Z,1516699619.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:26:59.892Z,1516699619.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:00.286Z,1516699620.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:00.689Z,1516699620.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:01.080Z,1516699621.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:01.473Z,1516699621.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:01.876Z,1516699621.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:02.285Z,1516699622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:02.691Z,1516699622.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:03.089Z,1516699623.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:03.476Z,1516699623.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:03.877Z,1516699623.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:04.277Z,1516699624.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:04.678Z,1516699624.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:05.089Z,1516699625.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:05.489Z,1516699625.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:05.893Z,1516699625.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:06.275Z,1516699626.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:06.675Z,1516699626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:07.077Z,1516699627.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:07.478Z,1516699627.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:07.875Z,1516699627.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:08.290Z,1516699628.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:08.697Z,1516699628.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:09.089Z,1516699629.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:09.485Z,1516699629.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:09.882Z,1516699629.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:10.282Z,1516699630.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:10.681Z,1516699630.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:11.095Z,1516699631.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:11.493Z,1516699631.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:11.899Z,1516699631.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:12.289Z,1516699632.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:12.689Z,1516699632.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:13.097Z,1516699633.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:13.486Z,1516699633.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:13.897Z,1516699633.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:14.291Z,1516699634.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:14.708Z,1516699634.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:15.097Z,1516699635.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:15.493Z,1516699635.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:15.897Z,1516699635.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:16.276Z,1516699636.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:16.705Z,1516699636.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:17.108Z,1516699637.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:17.486Z,1516699637.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:17.878Z,1516699637.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:18.274Z,1516699638.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:18.674Z,1516699638.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:19.077Z,1516699639.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:19.474Z,1516699639.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:19.873Z,1516699639.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:20.278Z,1516699640.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:20.682Z,1516699640.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:21.078Z,1516699641.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:21.489Z,1516699641.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:21.879Z,1516699641.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:22.275Z,1516699642.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:22.685Z,1516699642.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:23.082Z,1516699643.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:23.482Z,1516699643.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:23.881Z,1516699643.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:24.275Z,1516699644.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:24.674Z,1516699644.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:25.084Z,1516699645.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:25.485Z,1516699645.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:25.875Z,1516699645.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:26.289Z,1516699646.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:26.686Z,1516699646.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:27.080Z,1516699647.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:27.476Z,1516699647.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:27.881Z,1516699647.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:28.278Z,1516699648.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:28.679Z,1516699648.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:29.085Z,1516699649.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:29.481Z,1516699649.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:29.889Z,1516699649.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:30.281Z,1516699650.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:30.674Z,1516699650.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:31.084Z,1516699651.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:31.478Z,1516699651.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:31.875Z,1516699651.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:32.289Z,1516699652.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:32.682Z,1516699652.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:33.080Z,1516699653.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:33.476Z,1516699653.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:33.875Z,1516699653.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:34.275Z,1516699654.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:34.683Z,1516699654.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:35.085Z,1516699655.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:35.486Z,1516699655.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:35.889Z,1516699655.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:36.279Z,1516699656.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:36.674Z,1516699656.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:37.084Z,1516699657.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:37.478Z,1516699657.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:37.876Z,1516699657.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:38.282Z,1516699658.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:41.381Z,1516699661.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:41.537Z,1516699661.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:41.874Z,1516699661.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:42.280Z,1516699662.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:42.675Z,1516699662.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:43.080Z,1516699663.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:43.495Z,1516699663.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:43.881Z,1516699663.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:44.269Z,1516699664.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:44.676Z,1516699664.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:45.075Z,1516699665.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:45.476Z,1516699665.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:45.870Z,1516699665.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:46.280Z,1516699666.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:46.686Z,1516699666.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:47.083Z,1516699667.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:47.472Z,1516699667.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:47.876Z,1516699667.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:48.261Z,1516699668.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:48.660Z,1516699668.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:49.090Z,1516699669.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:49.486Z,1516699669.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:49.886Z,1516699669.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:50.269Z,1516699670.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:50.670Z,1516699670.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:51.070Z,1516699671.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:51.473Z,1516699671.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:51.866Z,1516699671.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:52.274Z,1516699672.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:52.675Z,1516699672.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:53.081Z,1516699673.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:53.472Z,1516699673.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:53.868Z,1516699673.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:54.271Z,1516699674.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:54.673Z,1516699674.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:55.079Z,1516699675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:55.481Z,1516699675.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:55.877Z,1516699675.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:56.277Z,1516699676.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:56.670Z,1516699676.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:57.068Z,1516699677.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:57.472Z,1516699677.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:57.869Z,1516699677.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:58.228Z,1516699678.228 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T09:27:58.228Z,1516699678.228 [NAL9602] Data Fault, FailCount= 4 2018-01-23T09:27:58.228Z,1516699678.228 [NAL9602](ERROR): Data Fault 2018-01-23T09:27:58.280Z,1516699678.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:58.310Z,1516699678.310 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T09:27:58.628Z,1516699678.628 [NAL9602](INFO): Powering down 2018-01-23T09:27:58.674Z,1516699678.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:59.069Z,1516699679.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:59.477Z,1516699679.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:27:59.506Z,1516699679.506 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T09:27:59.506Z,1516699679.506 [NAL9602] No Fault, FailCount= 4 2018-01-23T09:27:59.871Z,1516699679.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:00.272Z,1516699680.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:00.664Z,1516699680.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:01.075Z,1516699681.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:01.472Z,1516699681.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:01.864Z,1516699681.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:02.258Z,1516699682.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:02.658Z,1516699682.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:03.059Z,1516699683.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:03.462Z,1516699683.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:03.863Z,1516699683.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:04.263Z,1516699684.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:04.666Z,1516699684.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:05.064Z,1516699685.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:05.459Z,1516699685.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:05.870Z,1516699685.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:06.259Z,1516699686.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:06.659Z,1516699686.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:07.070Z,1516699687.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:07.466Z,1516699687.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:07.860Z,1516699687.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:08.270Z,1516699688.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:08.659Z,1516699688.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:09.059Z,1516699689.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:09.467Z,1516699689.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:09.867Z,1516699689.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:10.263Z,1516699690.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:10.670Z,1516699690.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:11.063Z,1516699691.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:11.463Z,1516699691.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:11.873Z,1516699691.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:12.268Z,1516699692.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:12.664Z,1516699692.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:13.072Z,1516699693.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:13.466Z,1516699693.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:13.865Z,1516699693.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:14.270Z,1516699694.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:14.677Z,1516699694.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:15.063Z,1516699695.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:15.472Z,1516699695.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:15.871Z,1516699695.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:16.271Z,1516699696.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:16.665Z,1516699696.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:17.068Z,1516699697.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:17.468Z,1516699697.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:17.870Z,1516699697.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:18.268Z,1516699698.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:18.671Z,1516699698.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:19.073Z,1516699699.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:19.457Z,1516699699.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:19.472Z,1516699699.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:19.851Z,1516699699.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:19.866Z,1516699699.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:20.251Z,1516699700.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:20.265Z,1516699700.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:20.670Z,1516699700.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:21.069Z,1516699701.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:21.465Z,1516699701.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:21.853Z,1516699701.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:21.869Z,1516699701.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:22.254Z,1516699702.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:22.269Z,1516699702.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:22.655Z,1516699702.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:22.669Z,1516699702.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:23.060Z,1516699703.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:23.075Z,1516699703.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:23.452Z,1516699703.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:23.467Z,1516699703.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:23.855Z,1516699703.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:23.870Z,1516699703.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:24.258Z,1516699704.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:24.273Z,1516699704.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:24.656Z,1516699704.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:24.671Z,1516699704.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:25.054Z,1516699705.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:28:25.069Z,1516699705.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:25.474Z,1516699705.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:25.870Z,1516699705.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:26.273Z,1516699706.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:26.681Z,1516699706.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:27.077Z,1516699707.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:27.475Z,1516699707.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:27.875Z,1516699707.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:28.269Z,1516699708.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:28.632Z,1516699708.632 [NAL9602](INFO): Powering up NAL9602 2018-01-23T09:28:28.683Z,1516699708.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:29.071Z,1516699709.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:29.473Z,1516699709.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:29.873Z,1516699709.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:30.275Z,1516699710.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:30.679Z,1516699710.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:31.074Z,1516699711.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:31.074Z,1516699711.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124 2018-01-23T09:28:31.074Z,1516699711.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:28:31.076Z,1516699711.076 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:31.076Z,1516699711.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 124 2018-01-23T09:28:31.076Z,1516699711.076 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:28:31.078Z,1516699711.078 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:31.078Z,1516699711.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124 2018-01-23T09:28:31.078Z,1516699711.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:28:31.111Z,1516699711.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:28:31.111Z,1516699711.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:28:31.111Z,1516699711.111 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:28:31.482Z,1516699711.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:28:31.483Z,1516699711.483 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124 2018-01-23T09:28:31.483Z,1516699711.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:28:31.483Z,1516699711.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 124 2018-01-23T09:28:31.484Z,1516699711.484 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:28:31.484Z,1516699711.484 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124 2018-01-23T09:28:31.873Z,1516699711.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:28:31.874Z,1516699711.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:28:31.874Z,1516699711.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:28:31.876Z,1516699711.876 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:28:31.876Z,1516699711.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:28:31.877Z,1516699711.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:28:31.877Z,1516699711.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:28:31.877Z,1516699711.877 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:28:31.878Z,1516699711.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:28:32.278Z,1516699712.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:28:32.280Z,1516699712.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:32.677Z,1516699712.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:28:32.678Z,1516699712.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:33.070Z,1516699713.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:28:33.071Z,1516699713.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:33.480Z,1516699713.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:28:33.481Z,1516699713.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:33.865Z,1516699713.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x109 got:0x50972 2018-01-23T09:28:33.884Z,1516699713.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:28:33.885Z,1516699713.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:34.274Z,1516699714.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:28:34.276Z,1516699714.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:34.681Z,1516699714.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:28:34.681Z,1516699714.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:35.080Z,1516699715.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:28:35.081Z,1516699715.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:35.473Z,1516699715.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:28:35.474Z,1516699715.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:35.877Z,1516699715.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:28:35.878Z,1516699715.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:36.270Z,1516699716.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:28:36.271Z,1516699716.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:36.674Z,1516699716.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:28:36.675Z,1516699716.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:37.076Z,1516699717.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:28:37.077Z,1516699717.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:37.468Z,1516699717.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:28:37.469Z,1516699717.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:37.484Z,1516699717.484 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:28:37.484Z,1516699717.484 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:28:37.484Z,1516699717.484 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:28:37.485Z,1516699717.485 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:28:37.872Z,1516699717.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:28:37.873Z,1516699717.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:37.880Z,1516699717.880 [Default:CheckIn:D] Stopped 2018-01-23T09:28:37.880Z,1516699717.880 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:28:38.276Z,1516699718.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:28:38.277Z,1516699718.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:38.280Z,1516699718.280 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 370.763672 min 2018-01-23T09:28:38.280Z,1516699718.280 [Default:CheckIn:E] Stopped 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn] Stopped 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn](INFO): Running loop #37 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn] Running Loop=37 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:28:38.281Z,1516699718.281 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:28:38.671Z,1516699718.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:28:38.672Z,1516699718.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:41.755Z,1516699721.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T09:28:41.756Z,1516699721.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:41.888Z,1516699721.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:28:41.889Z,1516699721.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:42.208Z,1516699722.208 [NAL9602](INFO): NAL9602 initialized 2018-01-23T09:28:42.274Z,1516699722.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:28:42.275Z,1516699722.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:42.645Z,1516699722.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x46061 got:0x58909 2018-01-23T09:28:42.664Z,1516699722.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:28:42.665Z,1516699722.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:43.084Z,1516699723.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:28:43.085Z,1516699723.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:43.463Z,1516699723.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:28:43.464Z,1516699723.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:43.864Z,1516699723.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:28:43.865Z,1516699723.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:44.250Z,1516699724.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:28:44.252Z,1516699724.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:44.645Z,1516699724.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:28:44.646Z,1516699724.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:45.048Z,1516699725.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:28:45.049Z,1516699725.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:45.458Z,1516699725.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:28:45.459Z,1516699725.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:45.872Z,1516699725.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:28:45.873Z,1516699725.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:46.270Z,1516699726.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:28:46.288Z,1516699726.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:46.640Z,1516699726.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:28:46.641Z,1516699726.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:47.056Z,1516699727.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:28:47.057Z,1516699727.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:47.460Z,1516699727.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:28:47.460Z,1516699727.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:47.852Z,1516699727.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:28:47.853Z,1516699727.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:48.254Z,1516699728.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:28:48.256Z,1516699728.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:48.665Z,1516699728.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:28:48.666Z,1516699728.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:49.065Z,1516699729.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:28:49.066Z,1516699729.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:49.473Z,1516699729.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:28:49.475Z,1516699729.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:49.855Z,1516699729.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:28:49.856Z,1516699729.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:50.261Z,1516699730.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:28:50.262Z,1516699730.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:50.636Z,1516699730.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:28:50.637Z,1516699730.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:51.040Z,1516699731.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:28:51.041Z,1516699731.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:51.458Z,1516699731.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:51.871Z,1516699731.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:52.271Z,1516699732.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:52.640Z,1516699732.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:53.049Z,1516699733.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:53.453Z,1516699733.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:53.848Z,1516699733.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:54.249Z,1516699734.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:54.653Z,1516699734.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:55.050Z,1516699735.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:55.454Z,1516699735.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:55.849Z,1516699735.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:56.244Z,1516699736.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:56.652Z,1516699736.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:57.047Z,1516699737.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:57.449Z,1516699737.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:57.850Z,1516699737.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:58.262Z,1516699738.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:58.644Z,1516699738.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:59.042Z,1516699739.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:59.446Z,1516699739.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:28:59.846Z,1516699739.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:00.250Z,1516699740.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:00.658Z,1516699740.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:01.068Z,1516699741.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:01.454Z,1516699741.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:01.856Z,1516699741.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:02.247Z,1516699742.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:02.657Z,1516699742.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:03.061Z,1516699743.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:03.475Z,1516699743.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:03.869Z,1516699743.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:04.264Z,1516699744.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:04.675Z,1516699744.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:05.054Z,1516699745.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:05.453Z,1516699745.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:05.838Z,1516699745.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:06.237Z,1516699746.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:06.665Z,1516699746.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:07.072Z,1516699747.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:07.474Z,1516699747.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:07.849Z,1516699747.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:08.245Z,1516699748.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:08.645Z,1516699748.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:09.042Z,1516699749.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:09.446Z,1516699749.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:09.850Z,1516699749.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:10.248Z,1516699750.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:10.644Z,1516699750.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:11.043Z,1516699751.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:11.448Z,1516699751.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:11.845Z,1516699751.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:12.243Z,1516699752.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:12.652Z,1516699752.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:13.054Z,1516699753.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:13.457Z,1516699753.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:13.846Z,1516699753.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:14.244Z,1516699754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:14.646Z,1516699754.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:15.042Z,1516699755.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:15.454Z,1516699755.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:15.861Z,1516699755.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:16.261Z,1516699756.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:16.648Z,1516699756.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:17.045Z,1516699757.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:17.442Z,1516699757.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:17.845Z,1516699757.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:18.257Z,1516699758.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:18.665Z,1516699758.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:19.057Z,1516699759.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:19.453Z,1516699759.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:19.843Z,1516699759.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:20.245Z,1516699760.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:20.645Z,1516699760.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:21.048Z,1516699761.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:21.458Z,1516699761.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:21.861Z,1516699761.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:22.256Z,1516699762.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:22.648Z,1516699762.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:23.045Z,1516699763.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:23.448Z,1516699763.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:23.849Z,1516699763.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:24.245Z,1516699764.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:24.657Z,1516699764.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:25.061Z,1516699765.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:25.454Z,1516699765.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:25.853Z,1516699765.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:26.252Z,1516699766.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:26.651Z,1516699766.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:27.053Z,1516699767.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:27.455Z,1516699767.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:27.862Z,1516699767.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:28.253Z,1516699768.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:28.650Z,1516699768.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:29.051Z,1516699769.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:29.453Z,1516699769.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:29.849Z,1516699769.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:30.244Z,1516699770.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:30.653Z,1516699770.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:31.058Z,1516699771.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:31.455Z,1516699771.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:31.853Z,1516699771.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:32.257Z,1516699772.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:32.649Z,1516699772.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:33.045Z,1516699773.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:33.455Z,1516699773.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:33.857Z,1516699773.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:34.264Z,1516699774.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:34.646Z,1516699774.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:35.049Z,1516699775.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:35.445Z,1516699775.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:35.850Z,1516699775.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:36.249Z,1516699776.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:36.652Z,1516699776.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:37.073Z,1516699777.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:37.454Z,1516699777.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:37.852Z,1516699777.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:38.251Z,1516699778.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:38.652Z,1516699778.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:39.063Z,1516699779.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:42.158Z,1516699782.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:42.325Z,1516699782.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:42.631Z,1516699782.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:43.027Z,1516699783.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:43.426Z,1516699783.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:43.830Z,1516699783.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:44.231Z,1516699784.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:44.655Z,1516699784.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:45.036Z,1516699785.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:45.437Z,1516699785.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:45.832Z,1516699785.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:46.225Z,1516699786.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:46.636Z,1516699786.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:47.029Z,1516699787.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:47.437Z,1516699787.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:47.833Z,1516699787.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:48.237Z,1516699788.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:48.630Z,1516699788.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:49.023Z,1516699789.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:49.433Z,1516699789.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:49.837Z,1516699789.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:50.233Z,1516699790.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:50.625Z,1516699790.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:51.026Z,1516699791.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:51.434Z,1516699791.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:51.841Z,1516699791.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:52.241Z,1516699792.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:52.624Z,1516699792.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:53.025Z,1516699793.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:53.433Z,1516699793.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:53.840Z,1516699793.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:54.234Z,1516699794.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:54.625Z,1516699794.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:55.024Z,1516699795.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:55.433Z,1516699795.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:55.845Z,1516699795.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:56.237Z,1516699796.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:56.626Z,1516699796.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:57.033Z,1516699797.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:57.435Z,1516699797.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:57.841Z,1516699797.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:58.241Z,1516699798.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:58.628Z,1516699798.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:59.025Z,1516699799.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:59.433Z,1516699799.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:29:59.844Z,1516699799.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:00.241Z,1516699800.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:00.626Z,1516699800.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:01.028Z,1516699801.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:01.433Z,1516699801.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:01.837Z,1516699801.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:02.240Z,1516699802.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:02.631Z,1516699802.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:03.031Z,1516699803.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:03.434Z,1516699803.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:03.837Z,1516699803.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:04.234Z,1516699804.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:04.632Z,1516699804.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:05.033Z,1516699805.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:05.435Z,1516699805.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:05.838Z,1516699805.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:06.237Z,1516699806.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:06.632Z,1516699806.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:07.036Z,1516699807.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:07.434Z,1516699807.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:07.841Z,1516699807.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:08.234Z,1516699808.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:08.632Z,1516699808.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:09.031Z,1516699809.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:09.448Z,1516699809.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:09.838Z,1516699809.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:10.234Z,1516699810.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:10.634Z,1516699810.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:11.025Z,1516699811.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:11.435Z,1516699811.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:11.835Z,1516699811.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:12.237Z,1516699812.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:12.634Z,1516699812.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:13.030Z,1516699813.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:13.429Z,1516699813.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:13.832Z,1516699813.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:14.234Z,1516699814.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:14.634Z,1516699814.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:15.038Z,1516699815.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:15.433Z,1516699815.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:15.829Z,1516699815.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:16.231Z,1516699816.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:16.632Z,1516699816.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:17.029Z,1516699817.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:17.431Z,1516699817.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:17.845Z,1516699817.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:18.238Z,1516699818.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:18.634Z,1516699818.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:19.032Z,1516699819.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:19.429Z,1516699819.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:19.832Z,1516699819.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:20.232Z,1516699820.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:20.643Z,1516699820.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:21.045Z,1516699821.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:21.447Z,1516699821.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:21.833Z,1516699821.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:22.240Z,1516699822.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:22.617Z,1516699822.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:23.045Z,1516699823.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:23.452Z,1516699823.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:23.856Z,1516699823.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:24.254Z,1516699824.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:24.632Z,1516699824.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:25.048Z,1516699825.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:25.426Z,1516699825.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:25.826Z,1516699825.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:26.225Z,1516699826.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:26.629Z,1516699826.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:27.030Z,1516699827.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:27.429Z,1516699827.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:27.822Z,1516699827.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:28.223Z,1516699828.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:28.624Z,1516699828.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:29.023Z,1516699829.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:29.423Z,1516699829.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:29.836Z,1516699829.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:30.234Z,1516699830.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:30.633Z,1516699830.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:31.023Z,1516699831.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:31.423Z,1516699831.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:31.832Z,1516699831.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:32.223Z,1516699832.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:32.634Z,1516699832.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:33.037Z,1516699833.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:33.437Z,1516699833.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:33.826Z,1516699833.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:34.224Z,1516699834.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:34.623Z,1516699834.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:35.025Z,1516699835.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:35.425Z,1516699835.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:35.833Z,1516699835.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:36.237Z,1516699836.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:36.637Z,1516699836.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:37.028Z,1516699837.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:37.422Z,1516699837.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:37.831Z,1516699837.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:38.228Z,1516699838.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:38.637Z,1516699838.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:39.041Z,1516699839.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:39.438Z,1516699839.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:42.530Z,1516699842.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:42.669Z,1516699842.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:43.017Z,1516699843.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:43.423Z,1516699843.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:43.816Z,1516699843.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:44.219Z,1516699844.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:44.591Z,1516699844.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:45.016Z,1516699845.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:45.421Z,1516699845.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:45.829Z,1516699845.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:46.206Z,1516699846.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:46.629Z,1516699846.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:46.000Z,1516699847.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:47.397Z,1516699847.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:47.801Z,1516699847.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:48.243Z,1516699848.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:48.634Z,1516699848.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:49.004Z,1516699849.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:49.450Z,1516699849.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:49.858Z,1516699849.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:50.210Z,1516699850.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:50.646Z,1516699850.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:51.006Z,1516699851.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:51.408Z,1516699851.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:51.812Z,1516699851.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:52.218Z,1516699852.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:52.622Z,1516699852.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:53.022Z,1516699853.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:53.413Z,1516699853.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:53.812Z,1516699853.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:54.248Z,1516699854.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:54.640Z,1516699854.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:55.047Z,1516699855.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:55.436Z,1516699855.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:55.825Z,1516699855.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:56.213Z,1516699856.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:56.632Z,1516699856.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:57.031Z,1516699857.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:57.417Z,1516699857.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:57.864Z,1516699857.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:58.260Z,1516699858.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:58.621Z,1516699858.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:59.020Z,1516699859.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:59.419Z,1516699859.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:30:59.834Z,1516699859.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:00.266Z,1516699860.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:00.638Z,1516699860.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:01.049Z,1516699861.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:01.433Z,1516699861.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:01.813Z,1516699861.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:02.228Z,1516699862.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:02.621Z,1516699862.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:03.019Z,1516699863.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:03.407Z,1516699863.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:03.809Z,1516699863.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:04.210Z,1516699864.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:04.610Z,1516699864.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:04.992Z,1516699864.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:05.389Z,1516699865.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:05.801Z,1516699865.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:06.202Z,1516699866.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:06.598Z,1516699866.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:07.006Z,1516699867.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:07.436Z,1516699867.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:07.801Z,1516699867.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:08.201Z,1516699868.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:08.599Z,1516699868.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:09.009Z,1516699869.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:09.401Z,1516699869.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:09.802Z,1516699869.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:10.231Z,1516699870.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:10.631Z,1516699870.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:11.008Z,1516699871.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:11.400Z,1516699871.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:11.809Z,1516699871.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:12.203Z,1516699872.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:12.616Z,1516699872.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:13.010Z,1516699873.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:13.416Z,1516699873.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:13.804Z,1516699873.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:14.208Z,1516699874.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:14.604Z,1516699874.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:15.005Z,1516699875.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:15.407Z,1516699875.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:15.810Z,1516699875.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:16.210Z,1516699876.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:16.609Z,1516699876.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:16.000Z,1516699877.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:17.399Z,1516699877.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:17.809Z,1516699877.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:18.204Z,1516699878.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:18.609Z,1516699878.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:19.021Z,1516699879.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:19.414Z,1516699879.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:19.799Z,1516699879.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:20.207Z,1516699880.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:20.607Z,1516699880.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:21.002Z,1516699881.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:21.409Z,1516699881.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:21.811Z,1516699881.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:22.210Z,1516699882.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:22.613Z,1516699882.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:23.004Z,1516699883.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:23.399Z,1516699883.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:23.809Z,1516699883.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:24.204Z,1516699884.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:24.609Z,1516699884.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:25.017Z,1516699885.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:25.414Z,1516699885.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:25.809Z,1516699885.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:26.209Z,1516699886.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:26.604Z,1516699886.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:27.009Z,1516699887.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:27.408Z,1516699887.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:27.810Z,1516699887.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:28.213Z,1516699888.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:28.621Z,1516699888.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:29.008Z,1516699889.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:29.399Z,1516699889.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:29.808Z,1516699889.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:30.199Z,1516699890.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:30.610Z,1516699890.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:31.021Z,1516699891.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:31.415Z,1516699891.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:31.805Z,1516699891.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:32.209Z,1516699892.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:32.209Z,1516699892.209 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125 2018-01-23T09:31:32.209Z,1516699892.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:31:32.211Z,1516699892.211 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:32.211Z,1516699892.211 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 125 2018-01-23T09:31:32.211Z,1516699892.211 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:31:32.213Z,1516699892.213 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:32.213Z,1516699892.213 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125 2018-01-23T09:31:32.213Z,1516699892.213 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:31:32.225Z,1516699892.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:31:32.225Z,1516699892.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:31:32.226Z,1516699892.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:31:32.634Z,1516699892.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:31:32.634Z,1516699892.634 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125 2018-01-23T09:31:32.643Z,1516699892.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:31:32.643Z,1516699892.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 125 2018-01-23T09:31:32.643Z,1516699892.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:31:32.643Z,1516699892.643 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125 2018-01-23T09:31:33.020Z,1516699893.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:31:33.020Z,1516699893.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:31:33.020Z,1516699893.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:31:33.021Z,1516699893.021 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:31:33.021Z,1516699893.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:31:33.021Z,1516699893.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:31:33.022Z,1516699893.022 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:31:33.022Z,1516699893.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:31:33.023Z,1516699893.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:31:33.414Z,1516699893.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:31:33.415Z,1516699893.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:33.808Z,1516699893.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:31:33.809Z,1516699893.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:34.208Z,1516699894.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:31:34.209Z,1516699894.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:34.622Z,1516699894.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:31:34.623Z,1516699894.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:35.015Z,1516699895.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:31:35.016Z,1516699895.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:35.420Z,1516699895.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:31:35.421Z,1516699895.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:35.807Z,1516699895.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:31:35.808Z,1516699895.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:36.194Z,1516699896.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:31:36.223Z,1516699896.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:36.613Z,1516699896.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:31:36.614Z,1516699896.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:37.019Z,1516699897.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:31:37.020Z,1516699897.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:37.420Z,1516699897.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:31:37.421Z,1516699897.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:37.813Z,1516699897.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:31:37.814Z,1516699897.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:38.196Z,1516699898.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:31:38.197Z,1516699898.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:38.620Z,1516699898.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:31:38.621Z,1516699898.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:39.027Z,1516699899.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:31:39.028Z,1516699899.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:39.425Z,1516699899.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:31:39.426Z,1516699899.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:39.802Z,1516699899.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:31:39.803Z,1516699899.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:43.038Z,1516699903.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:31:43.039Z,1516699903.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:43.184Z,1516699903.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s. 2018-01-23T09:31:43.185Z,1516699903.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:43.529Z,1516699903.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T09:31:43.530Z,1516699903.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:43.926Z,1516699903.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T09:31:43.927Z,1516699903.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:44.308Z,1516699904.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T09:31:44.309Z,1516699904.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:44.705Z,1516699904.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T09:31:44.706Z,1516699904.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:45.105Z,1516699905.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T09:31:45.106Z,1516699905.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:45.513Z,1516699905.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T09:31:45.514Z,1516699905.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:45.920Z,1516699905.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T09:31:45.921Z,1516699905.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:46.343Z,1516699906.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T09:31:46.344Z,1516699906.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:46.720Z,1516699906.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T09:31:46.721Z,1516699906.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:47.112Z,1516699907.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T09:31:47.113Z,1516699907.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:47.482Z,1516699907.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:31:47.524Z,1516699907.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T09:31:47.525Z,1516699907.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:47.887Z,1516699907.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:31:47.922Z,1516699907.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T09:31:47.927Z,1516699907.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:48.284Z,1516699908.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:31:48.320Z,1516699908.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T09:31:48.321Z,1516699908.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:48.728Z,1516699908.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T09:31:48.729Z,1516699908.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:49.126Z,1516699909.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T09:31:49.127Z,1516699909.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:49.530Z,1516699909.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T09:31:49.531Z,1516699909.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:49.900Z,1516699909.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T09:31:49.901Z,1516699909.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:50.305Z,1516699910.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T09:31:50.306Z,1516699910.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:50.700Z,1516699910.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T09:31:50.701Z,1516699910.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:51.124Z,1516699911.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T09:31:51.125Z,1516699911.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:51.500Z,1516699911.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T09:31:51.501Z,1516699911.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:51.934Z,1516699911.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T09:31:51.935Z,1516699911.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:52.310Z,1516699912.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:52.707Z,1516699912.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:53.102Z,1516699913.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:53.503Z,1516699913.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:53.902Z,1516699913.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:54.303Z,1516699914.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:54.705Z,1516699914.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:55.109Z,1516699915.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:55.506Z,1516699915.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:55.905Z,1516699915.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:56.302Z,1516699916.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:56.702Z,1516699916.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:57.108Z,1516699917.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:57.500Z,1516699917.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:57.906Z,1516699917.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:58.309Z,1516699918.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:58.706Z,1516699918.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:59.102Z,1516699919.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:59.508Z,1516699919.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:31:59.905Z,1516699919.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:00.303Z,1516699920.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:00.705Z,1516699920.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:01.110Z,1516699921.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:01.518Z,1516699921.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:01.904Z,1516699921.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:02.303Z,1516699922.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:02.707Z,1516699922.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:03.104Z,1516699923.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:03.502Z,1516699923.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:03.912Z,1516699923.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:04.313Z,1516699924.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:04.713Z,1516699924.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:05.107Z,1516699925.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:05.503Z,1516699925.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:05.912Z,1516699925.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:06.303Z,1516699926.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:06.716Z,1516699926.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:07.114Z,1516699927.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:07.513Z,1516699927.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:07.907Z,1516699927.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:08.307Z,1516699928.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:08.709Z,1516699928.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:09.104Z,1516699929.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:09.502Z,1516699929.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:09.913Z,1516699929.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:10.308Z,1516699930.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:10.713Z,1516699930.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:11.113Z,1516699931.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:11.503Z,1516699931.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:11.905Z,1516699931.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:12.302Z,1516699932.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:12.717Z,1516699932.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:13.117Z,1516699933.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:13.513Z,1516699933.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:13.907Z,1516699933.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:14.303Z,1516699934.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:14.712Z,1516699934.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:15.104Z,1516699935.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:15.503Z,1516699935.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:15.913Z,1516699935.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:16.313Z,1516699936.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:16.713Z,1516699936.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:17.103Z,1516699937.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:17.508Z,1516699937.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:17.913Z,1516699937.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:18.309Z,1516699938.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:18.709Z,1516699938.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:19.114Z,1516699939.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:19.513Z,1516699939.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:19.903Z,1516699939.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:20.303Z,1516699940.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:20.708Z,1516699940.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:21.104Z,1516699941.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:21.502Z,1516699941.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:21.908Z,1516699941.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:22.309Z,1516699942.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:22.709Z,1516699942.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:23.104Z,1516699943.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:23.508Z,1516699943.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:23.907Z,1516699943.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:24.304Z,1516699944.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:24.710Z,1516699944.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:25.110Z,1516699945.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:25.514Z,1516699945.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:25.906Z,1516699945.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:26.306Z,1516699946.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:26.710Z,1516699946.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:27.106Z,1516699947.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:27.508Z,1516699947.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:27.921Z,1516699947.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:28.318Z,1516699948.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:28.725Z,1516699948.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:29.109Z,1516699949.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:29.518Z,1516699949.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:29.909Z,1516699949.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:30.312Z,1516699950.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:30.724Z,1516699950.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:31.118Z,1516699951.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:31.524Z,1516699951.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:31.906Z,1516699951.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:32.309Z,1516699952.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:32.718Z,1516699952.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:33.118Z,1516699953.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:33.524Z,1516699953.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:33.911Z,1516699953.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:34.313Z,1516699954.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:34.715Z,1516699954.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:35.122Z,1516699955.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:35.518Z,1516699955.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:35.909Z,1516699955.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:36.313Z,1516699956.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:36.719Z,1516699956.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:37.121Z,1516699957.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:37.523Z,1516699957.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:37.915Z,1516699957.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:38.315Z,1516699958.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:38.724Z,1516699958.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:39.119Z,1516699959.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:39.523Z,1516699959.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:39.915Z,1516699959.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:42.990Z,1516699962.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:43.132Z,1516699963.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:43.513Z,1516699963.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:43.914Z,1516699963.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:44.292Z,1516699964.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:44.690Z,1516699964.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:45.091Z,1516699965.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:45.497Z,1516699965.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:45.894Z,1516699965.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:46.296Z,1516699966.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:46.694Z,1516699966.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:47.092Z,1516699967.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:47.492Z,1516699967.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:47.897Z,1516699967.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:48.296Z,1516699968.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:48.724Z,1516699968.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:49.098Z,1516699969.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:49.497Z,1516699969.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:49.893Z,1516699969.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:50.297Z,1516699970.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:50.706Z,1516699970.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:51.098Z,1516699971.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:51.498Z,1516699971.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:51.895Z,1516699971.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:52.288Z,1516699972.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:52.697Z,1516699972.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:53.101Z,1516699973.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:53.498Z,1516699973.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:53.892Z,1516699973.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:54.286Z,1516699974.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:54.703Z,1516699974.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:55.102Z,1516699975.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:55.505Z,1516699975.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:55.897Z,1516699975.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:56.289Z,1516699976.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:56.706Z,1516699976.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:57.105Z,1516699977.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:57.498Z,1516699977.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:57.894Z,1516699977.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:58.302Z,1516699978.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:58.705Z,1516699978.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:59.106Z,1516699979.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:59.505Z,1516699979.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:32:59.897Z,1516699979.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:00.301Z,1516699980.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:00.708Z,1516699980.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:01.108Z,1516699981.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:01.511Z,1516699981.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:01.901Z,1516699981.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:02.303Z,1516699982.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:02.700Z,1516699982.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:03.106Z,1516699983.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:03.512Z,1516699983.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:03.917Z,1516699983.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:04.313Z,1516699984.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:04.702Z,1516699984.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:05.096Z,1516699985.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:05.485Z,1516699985.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:05.915Z,1516699985.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:06.325Z,1516699986.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:06.721Z,1516699986.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:07.084Z,1516699987.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:07.512Z,1516699987.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:07.889Z,1516699987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:08.291Z,1516699988.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:08.688Z,1516699988.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:09.097Z,1516699989.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:09.501Z,1516699989.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:09.902Z,1516699989.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:10.293Z,1516699990.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:10.693Z,1516699990.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:11.092Z,1516699991.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:11.491Z,1516699991.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:11.897Z,1516699991.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:12.299Z,1516699992.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:12.704Z,1516699992.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:13.101Z,1516699993.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:13.490Z,1516699993.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:13.897Z,1516699993.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:14.293Z,1516699994.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:14.697Z,1516699994.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:15.104Z,1516699995.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:15.513Z,1516699995.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:15.903Z,1516699995.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:16.293Z,1516699996.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:16.674Z,1516699996.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x42795 got:0x1857 2018-01-23T09:33:16.699Z,1516699996.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:17.098Z,1516699997.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:17.499Z,1516699997.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:17.908Z,1516699997.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:18.302Z,1516699998.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:18.709Z,1516699998.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:19.101Z,1516699999.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:19.497Z,1516699999.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:19.899Z,1516699999.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:20.297Z,1516700000.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:20.697Z,1516700000.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:21.103Z,1516700001.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:21.513Z,1516700001.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:21.921Z,1516700001.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:22.295Z,1516700002.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:22.701Z,1516700002.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:23.093Z,1516700003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:23.497Z,1516700003.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:23.906Z,1516700003.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:24.313Z,1516700004.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:24.708Z,1516700004.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:25.102Z,1516700005.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:25.504Z,1516700005.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:25.907Z,1516700005.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:26.299Z,1516700006.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:26.701Z,1516700006.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:27.103Z,1516700007.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:27.514Z,1516700007.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:27.913Z,1516700007.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:28.314Z,1516700008.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:28.709Z,1516700008.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:29.092Z,1516700009.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:29.491Z,1516700009.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:29.921Z,1516700009.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:30.315Z,1516700010.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:30.699Z,1516700010.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:31.092Z,1516700011.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:31.485Z,1516700011.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:31.887Z,1516700011.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:32.289Z,1516700012.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:32.696Z,1516700012.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:33.093Z,1516700013.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:33.494Z,1516700013.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:33.896Z,1516700013.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:34.295Z,1516700014.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:34.691Z,1516700014.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:35.089Z,1516700015.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:35.473Z,1516700015.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:33:35.488Z,1516700015.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:35.878Z,1516700015.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:33:35.897Z,1516700015.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:36.279Z,1516700016.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:33:36.294Z,1516700016.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:36.700Z,1516700016.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:37.091Z,1516700017.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:37.499Z,1516700017.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:37.892Z,1516700017.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:38.290Z,1516700018.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:38.294Z,1516700018.294 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:28:38.3Z 2018-01-23T09:33:38.294Z,1516700018.294 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:33:38.294Z,1516700018.294 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:33:38.689Z,1516700018.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:39.230Z,1516700019.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:39.528Z,1516700019.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:42.630Z,1516700022.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:42.696Z,1516700022.696 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0148.lzma 2018-01-23T09:33:42.755Z,1516700022.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:43.129Z,1516700023.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:43.453Z,1516700023.453 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0148.lzma.bak 2018-01-23T09:33:43.453Z,1516700023.453 [DataOverHttps](INFO): SBD MOMSN=7755359 2018-01-23T09:33:43.525Z,1516700023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:44.146Z,1516700024.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:44.324Z,1516700024.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:47.443Z,1516700027.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:47.559Z,1516700027.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:47.930Z,1516700027.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:48.327Z,1516700028.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:48.724Z,1516700028.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:49.125Z,1516700029.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:52.227Z,1516700032.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:52.288Z,1516700032.288 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0149.lzma 2018-01-23T09:33:52.368Z,1516700032.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:52.690Z,1516700032.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:53.049Z,1516700033.049 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0149.lzma.bak 2018-01-23T09:33:53.049Z,1516700033.049 [DataOverHttps](INFO): SBD MOMSN=7755361 2018-01-23T09:33:53.115Z,1516700033.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:53.730Z,1516700033.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:53.733Z,1516700033.733 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:33:53.733Z,1516700033.733 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:33:53.733Z,1516700033.733 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:33:53.924Z,1516700033.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:56.998Z,1516700036.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:57.145Z,1516700037.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:57.501Z,1516700037.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:57.898Z,1516700037.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:58.294Z,1516700038.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:58.706Z,1516700038.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:59.108Z,1516700039.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:59.505Z,1516700039.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:33:59.909Z,1516700039.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:00.299Z,1516700040.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:00.694Z,1516700040.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:01.098Z,1516700041.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:01.495Z,1516700041.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:01.905Z,1516700041.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:02.313Z,1516700042.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:02.706Z,1516700042.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:03.097Z,1516700043.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:03.504Z,1516700043.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:03.900Z,1516700043.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:04.300Z,1516700044.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:04.697Z,1516700044.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:05.106Z,1516700045.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:05.505Z,1516700045.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:05.913Z,1516700045.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:06.300Z,1516700046.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:06.701Z,1516700046.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:07.100Z,1516700047.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:07.498Z,1516700047.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:07.907Z,1516700047.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:08.309Z,1516700048.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:08.711Z,1516700048.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:09.103Z,1516700049.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:09.503Z,1516700049.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:09.905Z,1516700049.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:10.303Z,1516700050.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:10.703Z,1516700050.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:11.110Z,1516700051.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:11.508Z,1516700051.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:11.906Z,1516700051.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:12.303Z,1516700052.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:12.708Z,1516700052.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:13.107Z,1516700053.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:13.503Z,1516700053.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:13.908Z,1516700053.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:14.317Z,1516700054.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:14.717Z,1516700054.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:15.097Z,1516700055.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:15.492Z,1516700055.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:15.921Z,1516700055.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:16.301Z,1516700056.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:16.701Z,1516700056.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:17.128Z,1516700057.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:17.506Z,1516700057.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:17.898Z,1516700057.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:18.303Z,1516700058.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:18.701Z,1516700058.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:19.099Z,1516700059.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:19.503Z,1516700059.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:19.528Z,1516700059.528 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:34:19.906Z,1516700059.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:20.306Z,1516700060.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:20.693Z,1516700060.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:20.708Z,1516700060.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:21.076Z,1516700061.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:21.103Z,1516700061.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:21.491Z,1516700061.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:21.506Z,1516700061.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:21.891Z,1516700061.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:21.906Z,1516700061.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:22.278Z,1516700062.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:22.306Z,1516700062.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:22.674Z,1516700062.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:22.707Z,1516700062.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:23.092Z,1516700063.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:23.115Z,1516700063.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:23.498Z,1516700063.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:23.513Z,1516700063.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:23.895Z,1516700063.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:23.917Z,1516700063.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:24.272Z,1516700064.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:24.305Z,1516700064.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:24.708Z,1516700064.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:24.724Z,1516700064.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:25.073Z,1516700065.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:25.104Z,1516700065.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:25.472Z,1516700065.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:25.513Z,1516700065.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:25.887Z,1516700065.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:25.916Z,1516700065.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:26.287Z,1516700066.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:34:26.315Z,1516700066.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:26.719Z,1516700066.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:27.118Z,1516700067.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:27.501Z,1516700067.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:27.896Z,1516700067.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:28.296Z,1516700068.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:28.700Z,1516700068.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:29.098Z,1516700069.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:29.502Z,1516700069.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:29.905Z,1516700069.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:30.296Z,1516700070.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:30.689Z,1516700070.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:31.167Z,1516700071.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:31.500Z,1516700071.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:31.906Z,1516700071.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:32.309Z,1516700072.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:32.705Z,1516700072.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:33.105Z,1516700073.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:33.105Z,1516700073.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126 2018-01-23T09:34:33.105Z,1516700073.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:34:33.107Z,1516700073.107 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:33.107Z,1516700073.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 126 2018-01-23T09:34:33.107Z,1516700073.107 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:34:33.109Z,1516700073.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:33.109Z,1516700073.109 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126 2018-01-23T09:34:33.109Z,1516700073.109 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:34:33.141Z,1516700073.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:34:33.141Z,1516700073.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:34:33.141Z,1516700073.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:34:33.513Z,1516700073.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:34:33.513Z,1516700073.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126 2018-01-23T09:34:33.514Z,1516700073.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:34:33.514Z,1516700073.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 126 2018-01-23T09:34:33.515Z,1516700073.515 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:34:33.515Z,1516700073.515 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126 2018-01-23T09:34:33.905Z,1516700073.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:34:33.906Z,1516700073.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:34:33.906Z,1516700073.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:34:33.906Z,1516700073.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:34:33.907Z,1516700073.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:34:33.907Z,1516700073.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:34:33.907Z,1516700073.907 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:34:33.908Z,1516700073.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:34:33.908Z,1516700073.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:34:34.303Z,1516700074.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:34:34.304Z,1516700074.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:34.703Z,1516700074.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:34:34.704Z,1516700074.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:35.117Z,1516700075.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:34:35.118Z,1516700075.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:35.513Z,1516700075.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:34:35.514Z,1516700075.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:35.907Z,1516700075.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:34:35.908Z,1516700075.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:36.304Z,1516700076.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:34:36.305Z,1516700076.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:36.704Z,1516700076.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:34:36.705Z,1516700076.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:37.104Z,1516700077.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:34:37.105Z,1516700077.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:37.502Z,1516700077.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:34:37.503Z,1516700077.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:37.910Z,1516700077.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:34:37.911Z,1516700077.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:38.319Z,1516700078.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:34:38.320Z,1516700078.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:38.706Z,1516700078.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:34:38.707Z,1516700078.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:39.101Z,1516700079.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:34:39.102Z,1516700079.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:39.504Z,1516700079.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:34:39.505Z,1516700079.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:39.908Z,1516700079.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:34:39.909Z,1516700079.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:40.310Z,1516700080.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:34:40.311Z,1516700080.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:40.715Z,1516700080.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:34:40.716Z,1516700080.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:41.108Z,1516700081.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:34:41.109Z,1516700081.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:41.506Z,1516700081.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:34:41.508Z,1516700081.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:41.913Z,1516700081.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:34:41.913Z,1516700081.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:42.310Z,1516700082.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:34:42.311Z,1516700082.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:42.709Z,1516700082.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:34:42.710Z,1516700082.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:43.099Z,1516700083.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:34:43.100Z,1516700083.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:43.490Z,1516700083.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:34:43.517Z,1516700083.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:43.908Z,1516700083.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:34:43.909Z,1516700083.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:44.319Z,1516700084.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:34:44.320Z,1516700084.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:44.711Z,1516700084.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:34:44.712Z,1516700084.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:45.088Z,1516700085.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:34:45.089Z,1516700085.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:45.512Z,1516700085.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:34:45.513Z,1516700085.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:45.918Z,1516700085.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:34:45.919Z,1516700085.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:46.324Z,1516700086.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:34:46.325Z,1516700086.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:46.724Z,1516700086.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:34:46.725Z,1516700086.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:47.091Z,1516700087.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:34:47.092Z,1516700087.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:47.492Z,1516700087.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:34:47.493Z,1516700087.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:47.921Z,1516700087.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:34:47.922Z,1516700087.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:48.322Z,1516700088.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:34:48.323Z,1516700088.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:48.722Z,1516700088.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:34:48.727Z,1516700088.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:49.096Z,1516700089.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:34:49.097Z,1516700089.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:49.494Z,1516700089.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:34:49.495Z,1516700089.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:49.902Z,1516700089.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:34:49.903Z,1516700089.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:50.301Z,1516700090.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:34:50.302Z,1516700090.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:50.704Z,1516700090.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:34:50.705Z,1516700090.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:51.100Z,1516700091.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:34:51.101Z,1516700091.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:51.496Z,1516700091.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:34:51.496Z,1516700091.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:51.897Z,1516700091.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:34:51.898Z,1516700091.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:52.326Z,1516700092.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:34:52.328Z,1516700092.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:52.697Z,1516700092.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:34:52.698Z,1516700092.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:53.095Z,1516700093.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:34:53.096Z,1516700093.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:53.494Z,1516700093.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:53.898Z,1516700093.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:54.300Z,1516700094.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:57.398Z,1516700097.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:57.545Z,1516700097.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:57.901Z,1516700097.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:58.298Z,1516700098.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:58.690Z,1516700098.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:59.105Z,1516700099.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:59.509Z,1516700099.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:34:59.902Z,1516700099.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:00.297Z,1516700100.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:00.697Z,1516700100.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:01.096Z,1516700101.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:01.497Z,1516700101.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:01.912Z,1516700101.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:02.317Z,1516700102.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:02.709Z,1516700102.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:03.101Z,1516700103.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:03.485Z,1516700103.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:03.917Z,1516700103.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:04.310Z,1516700104.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:04.789Z,1516700104.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:05.088Z,1516700105.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:05.486Z,1516700105.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:05.894Z,1516700105.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:06.294Z,1516700106.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:06.696Z,1516700106.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:07.097Z,1516700107.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:07.491Z,1516700107.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:07.901Z,1516700107.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:08.298Z,1516700108.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:08.705Z,1516700108.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:09.092Z,1516700109.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:09.497Z,1516700109.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:09.901Z,1516700109.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:10.300Z,1516700110.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:10.701Z,1516700110.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:11.095Z,1516700111.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:11.492Z,1516700111.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:11.901Z,1516700111.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:12.301Z,1516700112.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:12.697Z,1516700112.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:13.097Z,1516700113.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:13.489Z,1516700113.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:13.892Z,1516700113.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:14.301Z,1516700114.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:14.702Z,1516700114.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:15.097Z,1516700115.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:15.486Z,1516700115.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:15.890Z,1516700115.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:16.299Z,1516700116.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:16.694Z,1516700116.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:17.099Z,1516700117.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:17.502Z,1516700117.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:17.898Z,1516700117.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:18.295Z,1516700118.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:18.698Z,1516700118.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:19.101Z,1516700119.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:19.493Z,1516700119.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:19.896Z,1516700119.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:20.302Z,1516700120.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:20.701Z,1516700120.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:21.109Z,1516700121.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:21.497Z,1516700121.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:21.892Z,1516700121.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:22.296Z,1516700122.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:22.693Z,1516700122.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:23.098Z,1516700123.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:23.508Z,1516700123.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:23.902Z,1516700123.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:24.297Z,1516700124.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:24.696Z,1516700124.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:25.097Z,1516700125.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:25.495Z,1516700125.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:25.898Z,1516700125.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:26.298Z,1516700126.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:26.702Z,1516700126.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:27.104Z,1516700127.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:27.497Z,1516700127.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:27.893Z,1516700127.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:28.296Z,1516700128.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:28.697Z,1516700128.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:29.098Z,1516700129.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:29.508Z,1516700129.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:29.898Z,1516700129.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:30.293Z,1516700130.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:30.698Z,1516700130.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:31.093Z,1516700131.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:31.495Z,1516700131.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:31.896Z,1516700131.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:32.309Z,1516700132.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:32.713Z,1516700132.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:33.102Z,1516700133.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:33.493Z,1516700133.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:33.897Z,1516700133.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:34.296Z,1516700134.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:34.697Z,1516700134.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:35.098Z,1516700135.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:35.502Z,1516700135.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:35.902Z,1516700135.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:36.293Z,1516700136.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:36.699Z,1516700136.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:37.101Z,1516700137.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:37.490Z,1516700137.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:37.904Z,1516700137.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:38.307Z,1516700138.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:38.703Z,1516700138.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:39.101Z,1516700139.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:39.501Z,1516700139.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:39.892Z,1516700139.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:40.303Z,1516700140.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:40.690Z,1516700140.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:41.112Z,1516700141.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:41.506Z,1516700141.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:41.903Z,1516700141.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:42.301Z,1516700142.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:42.696Z,1516700142.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:43.093Z,1516700143.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:43.496Z,1516700143.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:43.903Z,1516700143.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:44.303Z,1516700144.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:44.703Z,1516700144.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:45.109Z,1516700145.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:45.477Z,1516700145.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:45.905Z,1516700145.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:46.283Z,1516700146.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:46.709Z,1516700146.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:47.119Z,1516700147.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:47.517Z,1516700147.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:47.913Z,1516700147.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:48.293Z,1516700148.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:48.737Z,1516700148.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:49.118Z,1516700149.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:49.522Z,1516700149.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:49.925Z,1516700149.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:50.313Z,1516700150.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:50.735Z,1516700150.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:51.108Z,1516700151.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:51.503Z,1516700151.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:51.909Z,1516700151.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:52.346Z,1516700152.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:52.713Z,1516700152.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:53.114Z,1516700153.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:53.536Z,1516700153.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:53.917Z,1516700153.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:54.289Z,1516700154.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:35:54.780Z,1516700154.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:00.916Z,1516700160.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:01.060Z,1516700161.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:01.446Z,1516700161.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:01.884Z,1516700161.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:02.232Z,1516700162.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:02.629Z,1516700162.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:03.013Z,1516700163.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:03.416Z,1516700163.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:03.812Z,1516700163.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:04.243Z,1516700164.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:04.642Z,1516700164.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:05.040Z,1516700165.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:05.444Z,1516700165.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:05.843Z,1516700165.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:06.217Z,1516700166.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:06.617Z,1516700166.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:07.023Z,1516700167.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:07.446Z,1516700167.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:07.823Z,1516700167.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:08.225Z,1516700168.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:08.619Z,1516700168.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:09.019Z,1516700169.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:09.423Z,1516700169.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:09.824Z,1516700169.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:10.222Z,1516700170.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:10.624Z,1516700170.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:11.028Z,1516700171.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:11.428Z,1516700171.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:11.833Z,1516700171.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:12.218Z,1516700172.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:12.627Z,1516700172.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:13.033Z,1516700173.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:13.430Z,1516700173.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:13.826Z,1516700173.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:14.218Z,1516700174.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:14.621Z,1516700174.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:15.029Z,1516700175.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:15.437Z,1516700175.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:15.827Z,1516700175.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:16.217Z,1516700176.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:16.625Z,1516700176.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:17.026Z,1516700177.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:17.429Z,1516700177.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:17.825Z,1516700177.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:18.222Z,1516700178.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:18.624Z,1516700178.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:19.033Z,1516700179.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:19.430Z,1516700179.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:19.837Z,1516700179.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:20.220Z,1516700180.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:20.616Z,1516700180.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:21.026Z,1516700181.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:21.429Z,1516700181.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:21.833Z,1516700181.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:22.218Z,1516700182.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:22.624Z,1516700182.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:23.034Z,1516700183.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:23.433Z,1516700183.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:23.833Z,1516700183.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:24.193Z,1516700184.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:24.229Z,1516700184.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:24.594Z,1516700184.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:24.624Z,1516700184.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:25.019Z,1516700185.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:25.034Z,1516700185.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:25.419Z,1516700185.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:25.433Z,1516700185.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:25.815Z,1516700185.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:25.830Z,1516700185.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:26.203Z,1516700186.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:26.219Z,1516700186.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:26.606Z,1516700186.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:26.628Z,1516700186.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:27.019Z,1516700187.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:27.034Z,1516700187.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:27.418Z,1516700187.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:27.441Z,1516700187.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:27.836Z,1516700187.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:28.222Z,1516700188.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:28.629Z,1516700188.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:29.036Z,1516700189.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:29.441Z,1516700189.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:29.830Z,1516700189.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:30.228Z,1516700190.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:30.629Z,1516700190.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:31.035Z,1516700191.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:31.431Z,1516700191.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:31.834Z,1516700191.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:32.229Z,1516700192.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:32.628Z,1516700192.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:33.034Z,1516700193.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:33.430Z,1516700193.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:33.831Z,1516700193.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:34.224Z,1516700194.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:34.633Z,1516700194.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:35.037Z,1516700195.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:35.445Z,1516700195.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:35.839Z,1516700195.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:36.240Z,1516700196.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:36.647Z,1516700196.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:37.037Z,1516700197.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:37.434Z,1516700197.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:37.841Z,1516700197.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:38.240Z,1516700198.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:38.617Z,1516700198.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:39.041Z,1516700199.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:39.438Z,1516700199.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:39.817Z,1516700199.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:40.241Z,1516700200.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:40.643Z,1516700200.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:41.038Z,1516700201.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:41.420Z,1516700201.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:41.816Z,1516700201.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:42.221Z,1516700202.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:42.618Z,1516700202.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:43.019Z,1516700203.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:43.425Z,1516700203.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:43.825Z,1516700203.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:44.247Z,1516700204.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:44.620Z,1516700204.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:45.022Z,1516700205.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:45.445Z,1516700205.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:45.814Z,1516700205.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x11866 got:0x44325 2018-01-23T09:36:45.833Z,1516700205.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:46.225Z,1516700206.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:46.654Z,1516700206.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:47.031Z,1516700207.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:47.437Z,1516700207.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:47.817Z,1516700207.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x16844 got:0x7234 2018-01-23T09:36:47.853Z,1516700207.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:48.229Z,1516700208.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:48.636Z,1516700208.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:49.025Z,1516700209.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:49.436Z,1516700209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:49.837Z,1516700209.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:50.258Z,1516700210.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:50.593Z,1516700210.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:50.620Z,1516700210.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x63316 got:0x243 2018-01-23T09:36:50.637Z,1516700210.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:50.990Z,1516700210.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:51.028Z,1516700211.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:51.395Z,1516700211.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:51.425Z,1516700211.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:51.792Z,1516700211.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:51.823Z,1516700211.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:52.217Z,1516700212.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:52.235Z,1516700212.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:52.618Z,1516700212.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:52.634Z,1516700212.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:53.014Z,1516700213.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:53.030Z,1516700213.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:53.390Z,1516700213.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:53.417Z,1516700213.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:53.791Z,1516700213.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:53.830Z,1516700213.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:54.196Z,1516700214.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:54.226Z,1516700214.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:54.594Z,1516700214.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:54.629Z,1516700214.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:54.993Z,1516700214.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:55.024Z,1516700215.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:58.158Z,1516700218.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:58.173Z,1516700218.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:58.288Z,1516700218.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:58.324Z,1516700218.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:58.634Z,1516700218.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:58.649Z,1516700218.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:59.033Z,1516700219.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:59.048Z,1516700219.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:59.423Z,1516700219.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:59.445Z,1516700219.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:36:59.820Z,1516700219.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:36:59.847Z,1516700219.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:00.239Z,1516700220.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:00.253Z,1516700220.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:00.636Z,1516700220.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:00.660Z,1516700220.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:01.036Z,1516700221.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:01.051Z,1516700221.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:01.416Z,1516700221.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:01.453Z,1516700221.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:01.817Z,1516700221.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:01.834Z,1516700221.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x32107 got:0x33319 2018-01-23T09:37:01.878Z,1516700221.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:02.217Z,1516700222.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:02.257Z,1516700222.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:02.632Z,1516700222.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:02.647Z,1516700222.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:03.014Z,1516700223.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:03.045Z,1516700223.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:03.436Z,1516700223.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:03.457Z,1516700223.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:03.842Z,1516700223.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:03.856Z,1516700223.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:04.233Z,1516700224.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:04.255Z,1516700224.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:04.616Z,1516700224.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:04.663Z,1516700224.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:05.016Z,1516700225.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:05.047Z,1516700225.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:05.417Z,1516700225.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:05.453Z,1516700225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:05.822Z,1516700225.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:05.849Z,1516700225.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:06.237Z,1516700226.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:06.265Z,1516700226.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:06.638Z,1516700226.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:06.651Z,1516700226.651 [PNI_TCM](ERROR): CRC does not match. Expected:0x4038 got:0x6466 2018-01-23T09:37:06.686Z,1516700226.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:07.032Z,1516700227.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:07.057Z,1516700227.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:07.418Z,1516700227.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:07.446Z,1516700227.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:07.820Z,1516700227.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:07.865Z,1516700227.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:08.220Z,1516700228.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:08.250Z,1516700228.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:08.617Z,1516700228.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:08.649Z,1516700228.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:09.014Z,1516700229.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:09.041Z,1516700229.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:09.427Z,1516700229.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:09.458Z,1516700229.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:09.831Z,1516700229.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:09.870Z,1516700229.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:10.228Z,1516700230.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:10.257Z,1516700230.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:10.616Z,1516700230.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:10.660Z,1516700230.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:11.016Z,1516700231.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:11.061Z,1516700231.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:11.422Z,1516700231.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:11.453Z,1516700231.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:11.816Z,1516700231.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:11.860Z,1516700231.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:12.237Z,1516700232.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:12.264Z,1516700232.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:12.631Z,1516700232.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:12.667Z,1516700232.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:13.039Z,1516700233.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:13.069Z,1516700233.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:13.420Z,1516700233.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:13.463Z,1516700233.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:13.824Z,1516700233.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:13.842Z,1516700233.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:14.221Z,1516700234.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:14.266Z,1516700234.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:14.629Z,1516700234.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:14.644Z,1516700234.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:15.021Z,1516700235.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:15.037Z,1516700235.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:15.441Z,1516700235.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:15.469Z,1516700235.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:15.831Z,1516700235.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:15.870Z,1516700235.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:16.227Z,1516700236.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:16.242Z,1516700236.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:16.622Z,1516700236.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:16.652Z,1516700236.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:17.025Z,1516700237.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:17.044Z,1516700237.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:17.424Z,1516700237.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:17.447Z,1516700237.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:17.827Z,1516700237.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:17.842Z,1516700237.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:18.234Z,1516700238.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:18.256Z,1516700238.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:18.636Z,1516700238.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:18.680Z,1516700238.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:19.038Z,1516700239.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:19.080Z,1516700239.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:19.426Z,1516700239.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:19.445Z,1516700239.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:19.828Z,1516700239.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:19.853Z,1516700239.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:20.228Z,1516700240.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:20.247Z,1516700240.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:20.625Z,1516700240.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:20.645Z,1516700240.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:21.014Z,1516700241.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:21.046Z,1516700241.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:21.442Z,1516700241.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:21.461Z,1516700241.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:21.845Z,1516700241.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:21.860Z,1516700241.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:22.239Z,1516700242.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:22.282Z,1516700242.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:22.616Z,1516700242.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:22.649Z,1516700242.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:23.016Z,1516700243.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:23.042Z,1516700243.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:23.430Z,1516700243.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:23.449Z,1516700243.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:23.816Z,1516700243.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:23.849Z,1516700243.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:24.236Z,1516700244.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:24.251Z,1516700244.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:24.631Z,1516700244.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:24.646Z,1516700244.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:25.028Z,1516700245.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:25.044Z,1516700245.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:25.426Z,1516700245.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:25.440Z,1516700245.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:25.823Z,1516700245.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:25.849Z,1516700245.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:26.230Z,1516700246.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:26.245Z,1516700246.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:26.628Z,1516700246.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:26.642Z,1516700246.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:27.021Z,1516700247.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:27.049Z,1516700247.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:27.436Z,1516700247.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:27.451Z,1516700247.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:27.840Z,1516700247.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:27.855Z,1516700247.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:28.236Z,1516700248.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:28.262Z,1516700248.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:28.628Z,1516700248.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:28.649Z,1516700248.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:29.016Z,1516700249.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:29.045Z,1516700249.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:29.417Z,1516700249.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:29.453Z,1516700249.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:29.824Z,1516700249.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:29.860Z,1516700249.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:30.226Z,1516700250.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:30.257Z,1516700250.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:30.631Z,1516700250.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:30.657Z,1516700250.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:31.031Z,1516700251.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:31.068Z,1516700251.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:31.421Z,1516700251.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:31.448Z,1516700251.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:31.821Z,1516700251.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:31.849Z,1516700251.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:32.216Z,1516700252.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:32.253Z,1516700252.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:32.617Z,1516700252.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:32.654Z,1516700252.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:33.014Z,1516700253.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:33.041Z,1516700253.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:33.427Z,1516700253.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:33.455Z,1516700253.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:33.839Z,1516700253.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:33.858Z,1516700253.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:34.239Z,1516700254.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:34.261Z,1516700254.261 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:34.261Z,1516700254.261 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127 2018-01-23T09:37:34.261Z,1516700254.261 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:37:34.263Z,1516700254.263 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:34.263Z,1516700254.263 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 127 2018-01-23T09:37:34.263Z,1516700254.263 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:37:34.265Z,1516700254.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:34.265Z,1516700254.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127 2018-01-23T09:37:34.265Z,1516700254.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:37:34.298Z,1516700254.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:37:34.298Z,1516700254.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:37:34.303Z,1516700254.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:37:34.620Z,1516700254.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:34.674Z,1516700254.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:37:34.674Z,1516700254.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127 2018-01-23T09:37:34.674Z,1516700254.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:37:34.675Z,1516700254.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 127 2018-01-23T09:37:34.675Z,1516700254.675 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:37:34.675Z,1516700254.675 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127 2018-01-23T09:37:35.016Z,1516700255.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:35.060Z,1516700255.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:37:35.061Z,1516700255.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:37:35.061Z,1516700255.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:37:35.062Z,1516700255.062 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:37:35.062Z,1516700255.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:37:35.062Z,1516700255.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:37:35.063Z,1516700255.063 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:37:35.063Z,1516700255.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:37:35.064Z,1516700255.064 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:37:35.417Z,1516700255.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:35.432Z,1516700255.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:37:35.433Z,1516700255.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:35.816Z,1516700255.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:35.836Z,1516700255.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:37:35.837Z,1516700255.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:36.235Z,1516700256.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:36.265Z,1516700256.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:37:36.267Z,1516700256.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:36.635Z,1516700256.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:36.662Z,1516700256.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:37:36.663Z,1516700256.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:37.039Z,1516700257.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:37.066Z,1516700257.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:37:37.072Z,1516700257.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:37.416Z,1516700257.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:37.452Z,1516700257.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:37:37.453Z,1516700257.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:37.816Z,1516700257.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:37.848Z,1516700257.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:37:37.849Z,1516700257.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:38.216Z,1516700258.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:38.252Z,1516700258.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:37:38.253Z,1516700258.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:38.617Z,1516700258.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:38.653Z,1516700258.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:37:38.653Z,1516700258.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:39.014Z,1516700259.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:39.037Z,1516700259.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:37:39.038Z,1516700259.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:39.427Z,1516700259.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:39.462Z,1516700259.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:37:39.463Z,1516700259.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:39.840Z,1516700259.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:39.855Z,1516700259.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:37:39.856Z,1516700259.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:40.227Z,1516700260.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:40.261Z,1516700260.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:37:40.262Z,1516700260.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:40.616Z,1516700260.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:40.652Z,1516700260.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:37:40.653Z,1516700260.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:41.016Z,1516700261.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:41.052Z,1516700261.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:37:41.053Z,1516700261.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:41.430Z,1516700261.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:41.503Z,1516700261.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:37:41.507Z,1516700261.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:41.820Z,1516700261.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:41.852Z,1516700261.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:37:41.853Z,1516700261.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:42.227Z,1516700262.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:42.261Z,1516700262.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:37:42.262Z,1516700262.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:42.627Z,1516700262.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:42.660Z,1516700262.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:37:42.661Z,1516700262.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:43.027Z,1516700263.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:43.064Z,1516700263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:37:43.065Z,1516700263.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:43.416Z,1516700263.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:43.430Z,1516700263.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:37:43.431Z,1516700263.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:43.816Z,1516700263.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:43.836Z,1516700263.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:37:43.837Z,1516700263.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:44.224Z,1516700264.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:44.260Z,1516700264.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:37:44.261Z,1516700264.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:44.625Z,1516700264.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:44.639Z,1516700264.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:37:44.640Z,1516700264.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:45.020Z,1516700265.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:45.038Z,1516700265.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:37:45.039Z,1516700265.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:45.432Z,1516700265.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:45.446Z,1516700265.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:37:45.447Z,1516700265.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:45.831Z,1516700265.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:45.845Z,1516700265.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:37:45.846Z,1516700265.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:46.230Z,1516700266.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:46.244Z,1516700266.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:37:46.245Z,1516700266.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:46.623Z,1516700266.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:46.671Z,1516700266.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:37:46.672Z,1516700266.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:47.025Z,1516700267.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:47.039Z,1516700267.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:37:47.040Z,1516700267.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:47.424Z,1516700267.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:47.442Z,1516700267.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:37:47.443Z,1516700267.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:47.824Z,1516700267.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:47.838Z,1516700267.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:37:47.839Z,1516700267.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:48.230Z,1516700268.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:48.245Z,1516700268.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:37:48.246Z,1516700268.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:48.629Z,1516700268.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:48.648Z,1516700268.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:37:48.649Z,1516700268.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:49.034Z,1516700269.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:49.052Z,1516700269.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:37:49.053Z,1516700269.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:49.425Z,1516700269.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:49.439Z,1516700269.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:37:49.440Z,1516700269.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:49.820Z,1516700269.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:49.842Z,1516700269.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:37:49.843Z,1516700269.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:50.220Z,1516700270.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:50.242Z,1516700270.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:37:50.243Z,1516700270.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:50.625Z,1516700270.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:50.644Z,1516700270.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:37:50.645Z,1516700270.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:51.014Z,1516700271.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:51.045Z,1516700271.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:37:51.046Z,1516700271.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:51.439Z,1516700271.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:51.453Z,1516700271.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:37:51.454Z,1516700271.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:51.839Z,1516700271.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:51.860Z,1516700271.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:37:51.861Z,1516700271.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:52.239Z,1516700272.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:52.253Z,1516700272.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:37:52.254Z,1516700272.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:52.616Z,1516700272.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:52.648Z,1516700272.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:37:52.649Z,1516700272.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:53.017Z,1516700273.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:53.048Z,1516700273.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:37:53.049Z,1516700273.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:53.429Z,1516700273.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:53.444Z,1516700273.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:37:53.445Z,1516700273.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:53.816Z,1516700273.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:53.842Z,1516700273.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:37:53.843Z,1516700273.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:54.243Z,1516700274.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:54.258Z,1516700274.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:37:54.259Z,1516700274.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:54.632Z,1516700274.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:54.655Z,1516700274.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:55.036Z,1516700275.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:55.051Z,1516700275.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:58.114Z,1516700278.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:58.143Z,1516700278.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:58.242Z,1516700278.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:58.281Z,1516700278.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:58.611Z,1516700278.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:58.642Z,1516700278.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:59.007Z,1516700279.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:59.022Z,1516700279.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:59.400Z,1516700279.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:59.415Z,1516700279.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:37:59.794Z,1516700279.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:37:59.813Z,1516700279.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:00.199Z,1516700280.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:00.214Z,1516700280.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:00.590Z,1516700280.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:00.621Z,1516700280.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:00.997Z,1516700280.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:01.012Z,1516700281.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:01.400Z,1516700281.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:01.415Z,1516700281.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:01.800Z,1516700281.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:01.821Z,1516700281.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:02.205Z,1516700282.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:02.220Z,1516700282.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:02.594Z,1516700282.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:02.622Z,1516700282.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:02.998Z,1516700282.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:03.013Z,1516700283.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:03.389Z,1516700283.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:03.417Z,1516700283.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:03.795Z,1516700283.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:03.817Z,1516700283.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:04.200Z,1516700284.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:04.223Z,1516700284.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:04.608Z,1516700284.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:04.624Z,1516700284.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:05.006Z,1516700285.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:05.025Z,1516700285.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:05.386Z,1516700285.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:05.420Z,1516700285.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:05.785Z,1516700285.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:05.818Z,1516700285.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:06.202Z,1516700286.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:06.230Z,1516700286.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:06.612Z,1516700286.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:06.627Z,1516700286.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:07.006Z,1516700287.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:07.029Z,1516700287.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:07.385Z,1516700287.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:07.417Z,1516700287.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:07.784Z,1516700287.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:07.821Z,1516700287.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:08.200Z,1516700288.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:08.233Z,1516700288.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:08.599Z,1516700288.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:08.628Z,1516700288.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:08.995Z,1516700288.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:09.030Z,1516700289.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:09.385Z,1516700289.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:09.425Z,1516700289.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:09.788Z,1516700289.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:09.803Z,1516700289.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:10.203Z,1516700290.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:10.228Z,1516700290.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:10.618Z,1516700290.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:10.633Z,1516700290.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:11.003Z,1516700291.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:11.029Z,1516700291.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:11.391Z,1516700291.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:11.406Z,1516700291.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:11.790Z,1516700291.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:11.805Z,1516700291.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:12.207Z,1516700292.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:12.233Z,1516700292.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:12.603Z,1516700292.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:12.630Z,1516700292.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:13.007Z,1516700293.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:13.038Z,1516700293.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:13.390Z,1516700293.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:13.416Z,1516700293.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:13.791Z,1516700293.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:13.807Z,1516700293.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:14.199Z,1516700294.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:14.214Z,1516700294.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:14.599Z,1516700294.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:14.613Z,1516700294.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:15.007Z,1516700295.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:15.022Z,1516700295.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:15.396Z,1516700295.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:15.417Z,1516700295.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:15.797Z,1516700295.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:15.812Z,1516700295.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:16.200Z,1516700296.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:16.215Z,1516700296.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:16.599Z,1516700296.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:16.614Z,1516700296.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:17.003Z,1516700297.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:17.017Z,1516700297.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:17.392Z,1516700297.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:17.412Z,1516700297.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:17.788Z,1516700297.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:17.821Z,1516700297.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:18.207Z,1516700298.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:18.222Z,1516700298.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:18.606Z,1516700298.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:18.621Z,1516700298.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:19.003Z,1516700299.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:19.018Z,1516700299.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:19.394Z,1516700299.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:19.416Z,1516700299.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:19.797Z,1516700299.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:19.812Z,1516700299.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:20.202Z,1516700300.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:20.218Z,1516700300.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:20.607Z,1516700300.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:20.628Z,1516700300.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:21.007Z,1516700301.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:21.022Z,1516700301.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:21.391Z,1516700301.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:21.412Z,1516700301.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:21.802Z,1516700301.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:21.816Z,1516700301.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:22.207Z,1516700302.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:22.222Z,1516700302.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:22.604Z,1516700302.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:22.627Z,1516700302.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:23.002Z,1516700303.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:23.032Z,1516700303.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:23.398Z,1516700303.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:23.413Z,1516700303.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:23.784Z,1516700303.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:23.817Z,1516700303.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:24.204Z,1516700304.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:24.218Z,1516700304.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:24.610Z,1516700304.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:24.633Z,1516700304.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:25.007Z,1516700305.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:25.022Z,1516700305.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:25.385Z,1516700305.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:25.420Z,1516700305.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:25.796Z,1516700305.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:25.815Z,1516700305.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:26.200Z,1516700306.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:26.221Z,1516700306.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:26.608Z,1516700306.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:26.622Z,1516700306.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:27.007Z,1516700307.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:27.022Z,1516700307.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:27.385Z,1516700307.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:27.412Z,1516700307.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:27.788Z,1516700307.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:27.815Z,1516700307.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:28.208Z,1516700308.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:28.223Z,1516700308.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:28.606Z,1516700308.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:28.633Z,1516700308.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:29.003Z,1516700309.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:29.026Z,1516700309.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:29.390Z,1516700309.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:29.405Z,1516700309.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:29.795Z,1516700309.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:29.831Z,1516700309.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:30.203Z,1516700310.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:30.233Z,1516700310.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:30.603Z,1516700310.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:30.627Z,1516700310.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:31.007Z,1516700311.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:31.037Z,1516700311.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:31.398Z,1516700311.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:31.435Z,1516700311.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:31.793Z,1516700311.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:31.829Z,1516700311.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:32.203Z,1516700312.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:32.234Z,1516700312.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:32.607Z,1516700312.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:32.640Z,1516700312.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:33.008Z,1516700313.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:33.038Z,1516700313.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:33.397Z,1516700313.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:33.412Z,1516700313.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:33.794Z,1516700313.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:33.808Z,1516700313.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:34.207Z,1516700314.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:34.222Z,1516700314.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:34.603Z,1516700314.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:34.618Z,1516700314.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:35.003Z,1516700315.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:35.018Z,1516700315.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:35.392Z,1516700315.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:35.413Z,1516700315.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:35.793Z,1516700315.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:35.808Z,1516700315.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:36.204Z,1516700316.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:36.218Z,1516700316.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:36.607Z,1516700316.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:36.622Z,1516700316.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:37.004Z,1516700317.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:37.018Z,1516700317.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:37.396Z,1516700317.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:37.410Z,1516700317.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:37.802Z,1516700317.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:37.821Z,1516700317.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:38.204Z,1516700318.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:38.219Z,1516700318.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:38.604Z,1516700318.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:38.624Z,1516700318.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:39.003Z,1516700319.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:39.018Z,1516700319.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:39.391Z,1516700319.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:39.421Z,1516700319.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:39.800Z,1516700319.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:39.815Z,1516700319.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:40.197Z,1516700320.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:40.213Z,1516700320.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:40.603Z,1516700320.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:40.621Z,1516700320.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:41.006Z,1516700321.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:41.022Z,1516700321.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:41.404Z,1516700321.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:41.421Z,1516700321.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:41.788Z,1516700321.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:41.820Z,1516700321.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:42.184Z,1516700322.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:42.213Z,1516700322.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:42.585Z,1516700322.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:42.613Z,1516700322.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:42.984Z,1516700322.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:43.022Z,1516700323.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:43.372Z,1516700323.372 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T09:38:43.372Z,1516700323.372 [NAL9602] Data Fault, FailCount= 5 2018-01-23T09:38:43.372Z,1516700323.372 [NAL9602](ERROR): Data Fault 2018-01-23T09:38:43.410Z,1516700323.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:43.424Z,1516700323.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:43.438Z,1516700323.438 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T09:38:43.455Z,1516700323.455 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T09:38:43.769Z,1516700323.769 [NAL9602](INFO): Powering down 2018-01-23T09:38:43.786Z,1516700323.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:43.821Z,1516700323.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:43.845Z,1516700323.845 [CBIT](INFO): Critical error at 20180123T093843 2018-01-23T09:38:44.185Z,1516700324.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:44.212Z,1516700324.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:44.585Z,1516700324.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:44.620Z,1516700324.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:44.985Z,1516700324.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:45.012Z,1516700325.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:45.385Z,1516700325.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:45.416Z,1516700325.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:45.784Z,1516700325.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:45.823Z,1516700325.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:46.184Z,1516700326.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:46.199Z,1516700326.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:46.584Z,1516700326.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:46.600Z,1516700326.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:46.996Z,1516700326.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:47.035Z,1516700327.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:47.385Z,1516700327.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:47.400Z,1516700327.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:47.789Z,1516700327.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:47.809Z,1516700327.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:48.192Z,1516700328.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:48.206Z,1516700328.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:48.588Z,1516700328.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:48.603Z,1516700328.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:48.987Z,1516700328.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:49.006Z,1516700329.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:49.390Z,1516700329.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:49.405Z,1516700329.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:49.791Z,1516700329.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:49.806Z,1516700329.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:50.193Z,1516700330.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:50.208Z,1516700330.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:50.591Z,1516700330.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:50.605Z,1516700330.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:50.991Z,1516700330.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:51.006Z,1516700331.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:51.389Z,1516700331.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:51.408Z,1516700331.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:51.785Z,1516700331.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:51.799Z,1516700331.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:52.185Z,1516700332.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:52.248Z,1516700332.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:52.588Z,1516700332.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:52.621Z,1516700332.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:52.984Z,1516700332.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:53.020Z,1516700333.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:53.381Z,1516700333.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:53.396Z,1516700333.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:53.788Z,1516700333.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:53.824Z,1516700333.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:54.184Z,1516700334.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:54.227Z,1516700334.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:54.230Z,1516700334.230 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:38:54.230Z,1516700334.230 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:38:54.230Z,1516700334.230 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:38:54.230Z,1516700334.230 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:38:54.581Z,1516700334.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:54.596Z,1516700334.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:54.599Z,1516700334.599 [Default:CheckIn:D] Stopped 2018-01-23T09:38:54.600Z,1516700334.600 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:38:54.984Z,1516700334.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:54.999Z,1516700334.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:55.002Z,1516700335.002 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.042318 min 2018-01-23T09:38:55.002Z,1516700335.002 [Default:CheckIn:E] Stopped 2018-01-23T09:38:55.002Z,1516700335.002 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:38:55.002Z,1516700335.002 [Default:CheckIn] Stopped 2018-01-23T09:38:55.003Z,1516700335.003 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:38:55.003Z,1516700335.003 [Default:CheckIn](INFO): Running loop #38 2018-01-23T09:38:55.003Z,1516700335.003 [Default:CheckIn] Running Loop=38 2018-01-23T09:38:55.003Z,1516700335.003 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:38:55.003Z,1516700335.003 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:38:55.396Z,1516700335.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:55.411Z,1516700335.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:58.487Z,1516700338.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:58.502Z,1516700338.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:58.609Z,1516700338.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:58.634Z,1516700338.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:58.960Z,1516700338.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:58.992Z,1516700338.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:59.364Z,1516700339.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:59.390Z,1516700339.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:38:59.760Z,1516700339.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:38:59.788Z,1516700339.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:00.160Z,1516700340.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:00.191Z,1516700340.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:00.558Z,1516700340.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:00.572Z,1516700340.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:00.960Z,1516700340.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:00.975Z,1516700340.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:01.363Z,1516700341.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:01.378Z,1516700341.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:01.764Z,1516700341.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:01.779Z,1516700341.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:02.163Z,1516700342.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:02.178Z,1516700342.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:02.572Z,1516700342.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:02.586Z,1516700342.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:02.961Z,1516700342.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:02.975Z,1516700342.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:03.372Z,1516700343.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:03.403Z,1516700343.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:03.765Z,1516700343.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:03.779Z,1516700343.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:04.165Z,1516700344.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:04.179Z,1516700344.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:04.565Z,1516700344.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:04.585Z,1516700344.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:04.965Z,1516700344.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:04.992Z,1516700344.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:05.367Z,1516700345.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:05.381Z,1516700345.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:05.765Z,1516700345.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:05.792Z,1516700345.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:06.169Z,1516700346.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:06.184Z,1516700346.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:06.565Z,1516700346.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:06.579Z,1516700346.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:06.970Z,1516700346.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:06.985Z,1516700346.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:07.366Z,1516700347.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:07.393Z,1516700347.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:07.767Z,1516700347.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:07.782Z,1516700347.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:08.166Z,1516700348.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:08.190Z,1516700348.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:08.571Z,1516700348.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:08.586Z,1516700348.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:08.965Z,1516700348.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:08.980Z,1516700348.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:09.365Z,1516700349.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:09.387Z,1516700349.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:09.765Z,1516700349.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:09.786Z,1516700349.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:10.169Z,1516700350.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:10.183Z,1516700350.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:10.573Z,1516700350.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:10.588Z,1516700350.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:10.965Z,1516700350.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:10.992Z,1516700350.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:11.369Z,1516700351.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:11.387Z,1516700351.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:11.768Z,1516700351.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:11.787Z,1516700351.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:12.161Z,1516700352.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:12.176Z,1516700352.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:12.567Z,1516700352.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:12.593Z,1516700352.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:12.973Z,1516700352.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:12.988Z,1516700352.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:13.369Z,1516700353.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:13.388Z,1516700353.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:13.769Z,1516700353.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:13.793Z,1516700353.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:14.168Z,1516700354.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:14.189Z,1516700354.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:14.568Z,1516700354.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:14.588Z,1516700354.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:14.967Z,1516700354.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:14.994Z,1516700354.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:15.373Z,1516700355.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:15.388Z,1516700355.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:15.765Z,1516700355.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:15.793Z,1516700355.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:16.168Z,1516700356.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:16.184Z,1516700356.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:16.568Z,1516700356.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:16.589Z,1516700356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:16.973Z,1516700356.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:16.989Z,1516700356.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:17.368Z,1516700357.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:17.384Z,1516700357.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:17.768Z,1516700357.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:17.788Z,1516700357.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:18.165Z,1516700358.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:18.187Z,1516700358.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:18.566Z,1516700358.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:18.596Z,1516700358.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:18.965Z,1516700358.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:18.987Z,1516700358.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:19.368Z,1516700359.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:19.387Z,1516700359.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:19.769Z,1516700359.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:19.784Z,1516700359.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:20.165Z,1516700360.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:20.187Z,1516700360.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:20.568Z,1516700360.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:20.587Z,1516700360.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:20.970Z,1516700360.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:20.984Z,1516700360.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:21.368Z,1516700361.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:21.388Z,1516700361.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:21.764Z,1516700361.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:21.791Z,1516700361.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:22.169Z,1516700362.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:22.193Z,1516700362.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:22.558Z,1516700362.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:22.585Z,1516700362.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:22.961Z,1516700362.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:22.997Z,1516700362.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:23.360Z,1516700363.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:23.388Z,1516700363.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:23.761Z,1516700363.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:23.861Z,1516700363.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:24.164Z,1516700364.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:24.197Z,1516700364.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:24.560Z,1516700364.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:24.594Z,1516700364.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:24.958Z,1516700364.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:24.986Z,1516700364.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:25.361Z,1516700365.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:25.393Z,1516700365.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:25.764Z,1516700365.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:25.789Z,1516700365.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:26.160Z,1516700366.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:26.196Z,1516700366.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:26.564Z,1516700366.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:26.597Z,1516700366.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:26.961Z,1516700366.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:26.976Z,1516700366.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:27.360Z,1516700367.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:27.388Z,1516700367.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:27.761Z,1516700367.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:27.797Z,1516700367.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:28.160Z,1516700368.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:28.196Z,1516700368.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:28.558Z,1516700368.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:28.573Z,1516700368.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:28.961Z,1516700368.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:28.997Z,1516700368.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:29.360Z,1516700369.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:29.375Z,1516700369.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:29.764Z,1516700369.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:29.779Z,1516700369.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:30.172Z,1516700370.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:30.187Z,1516700370.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:30.564Z,1516700370.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:30.592Z,1516700370.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:30.964Z,1516700370.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:30.986Z,1516700370.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:31.370Z,1516700371.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:31.389Z,1516700371.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:31.769Z,1516700371.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:31.784Z,1516700371.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:32.169Z,1516700372.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:32.185Z,1516700372.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:32.566Z,1516700372.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:32.593Z,1516700372.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:32.968Z,1516700372.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:32.982Z,1516700372.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:33.368Z,1516700373.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:33.383Z,1516700373.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:33.768Z,1516700373.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:33.782Z,1516700373.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:34.168Z,1516700374.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:34.188Z,1516700374.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:34.565Z,1516700374.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:34.580Z,1516700374.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:34.965Z,1516700374.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:34.986Z,1516700374.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:35.371Z,1516700375.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:35.385Z,1516700375.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:35.770Z,1516700375.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:35.785Z,1516700375.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:36.165Z,1516700376.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:36.192Z,1516700376.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:36.572Z,1516700376.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:36.587Z,1516700376.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:36.965Z,1516700376.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:36.981Z,1516700376.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:37.372Z,1516700377.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:37.389Z,1516700377.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:37.768Z,1516700377.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:37.782Z,1516700377.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:38.168Z,1516700378.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:38.183Z,1516700378.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:38.565Z,1516700378.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:38.584Z,1516700378.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:38.968Z,1516700378.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:38.982Z,1516700378.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:39.368Z,1516700379.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:39.383Z,1516700379.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:39.767Z,1516700379.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:39.790Z,1516700379.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:40.160Z,1516700380.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:40.186Z,1516700380.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:40.558Z,1516700380.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:40.593Z,1516700380.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:40.964Z,1516700380.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:40.990Z,1516700380.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:41.360Z,1516700381.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:41.386Z,1516700381.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:41.760Z,1516700381.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:41.793Z,1516700381.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:42.161Z,1516700382.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:42.193Z,1516700382.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:42.560Z,1516700382.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:42.594Z,1516700382.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:42.958Z,1516700382.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:42.996Z,1516700382.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:43.364Z,1516700383.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:43.390Z,1516700383.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:43.760Z,1516700383.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:43.792Z,1516700383.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:44.160Z,1516700384.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:44.192Z,1516700384.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:44.560Z,1516700384.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:44.596Z,1516700384.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:44.960Z,1516700384.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:44.996Z,1516700384.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:45.364Z,1516700385.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:45.390Z,1516700385.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:45.761Z,1516700385.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:45.792Z,1516700385.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:46.164Z,1516700386.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:46.196Z,1516700386.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:46.558Z,1516700386.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:46.573Z,1516700386.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:46.961Z,1516700386.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:46.977Z,1516700386.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:47.364Z,1516700387.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:47.378Z,1516700387.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:47.764Z,1516700387.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:47.779Z,1516700387.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:48.172Z,1516700388.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:48.207Z,1516700388.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:48.564Z,1516700388.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:48.579Z,1516700388.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:48.961Z,1516700388.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:48.977Z,1516700388.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:49.372Z,1516700389.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:49.387Z,1516700389.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:49.768Z,1516700389.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:49.788Z,1516700389.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:50.166Z,1516700390.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:50.181Z,1516700390.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:50.565Z,1516700390.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:50.592Z,1516700390.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:50.970Z,1516700390.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:50.985Z,1516700390.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:51.370Z,1516700391.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:51.385Z,1516700391.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:51.766Z,1516700391.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:51.785Z,1516700391.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:52.172Z,1516700392.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:52.186Z,1516700392.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:52.568Z,1516700392.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:52.583Z,1516700392.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:52.969Z,1516700392.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:52.988Z,1516700392.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:53.370Z,1516700393.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:53.384Z,1516700393.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:53.769Z,1516700393.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:53.784Z,1516700393.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:54.166Z,1516700394.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:54.196Z,1516700394.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:54.572Z,1516700394.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:54.587Z,1516700394.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:54.965Z,1516700394.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:54.981Z,1516700394.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:55.388Z,1516700395.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:55.419Z,1516700395.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:55.769Z,1516700395.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:55.784Z,1516700395.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:58.853Z,1516700398.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:58.876Z,1516700398.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:58.980Z,1516700398.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:58.995Z,1516700398.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:59.330Z,1516700399.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:59.353Z,1516700399.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:39:59.741Z,1516700399.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:39:59.756Z,1516700399.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:00.137Z,1516700400.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:00.153Z,1516700400.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:00.537Z,1516700400.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:00.553Z,1516700400.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:00.934Z,1516700400.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:00.949Z,1516700400.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:01.336Z,1516700401.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:01.353Z,1516700401.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:01.737Z,1516700401.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:01.754Z,1516700401.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:02.132Z,1516700402.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:02.146Z,1516700402.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:02.534Z,1516700402.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:02.550Z,1516700402.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:02.933Z,1516700402.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:02.948Z,1516700402.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:03.336Z,1516700403.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:03.351Z,1516700403.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:03.734Z,1516700403.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:03.750Z,1516700403.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:04.133Z,1516700404.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:04.149Z,1516700404.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:04.534Z,1516700404.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:04.549Z,1516700404.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:04.933Z,1516700404.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:04.949Z,1516700404.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:05.334Z,1516700405.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:05.350Z,1516700405.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:05.734Z,1516700405.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:05.749Z,1516700405.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:06.137Z,1516700406.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:06.153Z,1516700406.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:06.537Z,1516700406.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:06.553Z,1516700406.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:06.937Z,1516700406.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:06.952Z,1516700406.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:07.337Z,1516700407.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:07.353Z,1516700407.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:07.735Z,1516700407.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:07.751Z,1516700407.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:08.133Z,1516700408.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:08.148Z,1516700408.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:08.528Z,1516700408.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:08.543Z,1516700408.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:08.938Z,1516700408.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:08.954Z,1516700408.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:09.335Z,1516700409.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:09.350Z,1516700409.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:09.735Z,1516700409.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:09.750Z,1516700409.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:10.136Z,1516700410.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:10.151Z,1516700410.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:10.531Z,1516700410.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:10.549Z,1516700410.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:10.931Z,1516700410.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:10.946Z,1516700410.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:11.331Z,1516700411.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:11.358Z,1516700411.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:11.735Z,1516700411.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:11.750Z,1516700411.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:12.132Z,1516700412.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:12.151Z,1516700412.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:12.528Z,1516700412.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:12.565Z,1516700412.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:12.937Z,1516700412.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:12.952Z,1516700412.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:13.335Z,1516700413.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:13.350Z,1516700413.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:13.724Z,1516700413.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:13.757Z,1516700413.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:14.125Z,1516700414.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:14.145Z,1516700414.145 [PNI_TCM](ERROR): CRC does not match. Expected:0x23797 got:0x7618 2018-01-23T09:40:14.172Z,1516700414.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:14.524Z,1516700414.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:14.550Z,1516700414.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:14.924Z,1516700414.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:14.957Z,1516700414.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:15.324Z,1516700415.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:15.353Z,1516700415.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:15.739Z,1516700415.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:15.754Z,1516700415.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:16.126Z,1516700416.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:16.161Z,1516700416.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:16.526Z,1516700416.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:16.551Z,1516700416.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:16.921Z,1516700416.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:16.965Z,1516700416.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:17.325Z,1516700417.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:17.368Z,1516700417.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:17.726Z,1516700417.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:17.752Z,1516700417.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:18.126Z,1516700418.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:18.154Z,1516700418.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:18.528Z,1516700418.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:18.577Z,1516700418.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:18.928Z,1516700418.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:18.950Z,1516700418.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x9816 got:0x165 2018-01-23T09:40:18.969Z,1516700418.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:19.325Z,1516700419.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:19.354Z,1516700419.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:19.730Z,1516700419.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:19.769Z,1516700419.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:20.124Z,1516700420.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:20.168Z,1516700420.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:20.521Z,1516700420.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:20.560Z,1516700420.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:20.930Z,1516700420.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:20.957Z,1516700420.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:21.326Z,1516700421.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:21.360Z,1516700421.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:21.721Z,1516700421.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:21.761Z,1516700421.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:22.124Z,1516700422.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:22.152Z,1516700422.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:22.524Z,1516700422.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:22.562Z,1516700422.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:22.923Z,1516700422.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:22.948Z,1516700422.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:23.324Z,1516700423.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:23.372Z,1516700423.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:23.724Z,1516700423.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:23.768Z,1516700423.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:24.128Z,1516700424.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:24.167Z,1516700424.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:24.526Z,1516700424.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:24.542Z,1516700424.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:24.924Z,1516700424.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:24.968Z,1516700424.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:25.324Z,1516700425.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:25.338Z,1516700425.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:25.738Z,1516700425.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:25.773Z,1516700425.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:26.138Z,1516700426.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:26.174Z,1516700426.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:26.525Z,1516700426.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:26.570Z,1516700426.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:26.936Z,1516700426.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:26.975Z,1516700426.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:27.335Z,1516700427.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:27.353Z,1516700427.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:27.738Z,1516700427.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:27.753Z,1516700427.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:28.129Z,1516700428.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:28.177Z,1516700428.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:28.530Z,1516700428.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:28.552Z,1516700428.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:28.929Z,1516700428.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:28.949Z,1516700428.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:29.333Z,1516700429.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:29.357Z,1516700429.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:29.736Z,1516700429.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:29.780Z,1516700429.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:30.136Z,1516700430.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:30.154Z,1516700430.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:30.531Z,1516700430.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:30.556Z,1516700430.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:30.934Z,1516700430.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:30.953Z,1516700430.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:31.331Z,1516700431.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:31.379Z,1516700431.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:31.726Z,1516700431.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:31.750Z,1516700431.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:32.131Z,1516700432.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:32.151Z,1516700432.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:32.529Z,1516700432.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:32.549Z,1516700432.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:32.939Z,1516700432.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:32.955Z,1516700432.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:33.332Z,1516700433.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:33.346Z,1516700433.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:33.732Z,1516700433.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:33.752Z,1516700433.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:34.128Z,1516700434.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:34.160Z,1516700434.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:34.532Z,1516700434.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:34.549Z,1516700434.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:34.921Z,1516700434.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:34.953Z,1516700434.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:35.324Z,1516700435.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:35.362Z,1516700435.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:35.367Z,1516700435.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128 2018-01-23T09:40:35.367Z,1516700435.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:40:35.369Z,1516700435.369 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:35.369Z,1516700435.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 128 2018-01-23T09:40:35.369Z,1516700435.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:40:35.375Z,1516700435.375 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:35.376Z,1516700435.376 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128 2018-01-23T09:40:35.376Z,1516700435.376 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:40:35.404Z,1516700435.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:40:35.404Z,1516700435.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:40:35.405Z,1516700435.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:40:35.724Z,1516700435.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:35.774Z,1516700435.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:40:35.774Z,1516700435.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128 2018-01-23T09:40:35.775Z,1516700435.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:40:35.775Z,1516700435.775 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 128 2018-01-23T09:40:35.775Z,1516700435.775 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:40:35.776Z,1516700435.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128 2018-01-23T09:40:36.125Z,1516700436.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:36.158Z,1516700436.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:40:36.158Z,1516700436.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:40:36.158Z,1516700436.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:40:36.159Z,1516700436.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:40:36.159Z,1516700436.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:40:36.160Z,1516700436.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:40:36.160Z,1516700436.160 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:40:36.161Z,1516700436.161 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:40:36.161Z,1516700436.161 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:40:36.528Z,1516700436.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:36.569Z,1516700436.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:40:36.570Z,1516700436.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:36.928Z,1516700436.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:36.965Z,1516700436.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:40:36.966Z,1516700436.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:37.325Z,1516700437.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:37.356Z,1516700437.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:40:37.357Z,1516700437.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:37.724Z,1516700437.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:37.764Z,1516700437.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:40:37.765Z,1516700437.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:38.132Z,1516700438.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:38.146Z,1516700438.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:40:38.178Z,1516700438.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:38.525Z,1516700438.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:38.541Z,1516700438.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:40:38.542Z,1516700438.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:38.928Z,1516700438.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:38.949Z,1516700438.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:40:38.950Z,1516700438.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:39.328Z,1516700439.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:39.342Z,1516700439.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:40:39.344Z,1516700439.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:39.728Z,1516700439.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:39.748Z,1516700439.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:40:39.749Z,1516700439.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:40.130Z,1516700440.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:40.144Z,1516700440.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:40:40.145Z,1516700440.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:40.530Z,1516700440.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:40.556Z,1516700440.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:40:40.557Z,1516700440.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:40.928Z,1516700440.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:40.943Z,1516700440.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:40:40.944Z,1516700440.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:41.330Z,1516700441.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:41.348Z,1516700441.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:40:41.349Z,1516700441.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:41.730Z,1516700441.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:41.749Z,1516700441.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:40:41.750Z,1516700441.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:42.134Z,1516700442.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:42.152Z,1516700442.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:40:42.153Z,1516700442.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:42.531Z,1516700442.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:42.545Z,1516700442.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:40:42.546Z,1516700442.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:42.931Z,1516700442.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:42.953Z,1516700442.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:40:42.954Z,1516700442.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:43.334Z,1516700443.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:43.349Z,1516700443.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:40:43.350Z,1516700443.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:43.382Z,1516700443.382 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T09:40:43.382Z,1516700443.382 [NAL9602] No Fault, FailCount= 5 2018-01-23T09:40:43.727Z,1516700443.727 [NAL9602](INFO): Powering up NAL9602 2018-01-23T09:40:43.745Z,1516700443.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:43.763Z,1516700443.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:40:43.764Z,1516700443.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:44.132Z,1516700444.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:44.146Z,1516700444.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:40:44.148Z,1516700444.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:44.532Z,1516700444.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:44.546Z,1516700444.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:40:44.548Z,1516700444.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:44.932Z,1516700444.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:44.945Z,1516700444.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:40:44.947Z,1516700444.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:45.331Z,1516700445.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:45.346Z,1516700445.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:40:45.348Z,1516700445.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:45.732Z,1516700445.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:45.746Z,1516700445.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:40:45.748Z,1516700445.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:46.132Z,1516700446.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:46.146Z,1516700446.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:40:46.147Z,1516700446.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:46.532Z,1516700446.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:46.546Z,1516700446.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:40:46.548Z,1516700446.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:46.932Z,1516700446.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:46.946Z,1516700446.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:40:46.948Z,1516700446.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:47.332Z,1516700447.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:47.346Z,1516700447.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:40:47.348Z,1516700447.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:47.732Z,1516700447.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:47.746Z,1516700447.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:40:47.748Z,1516700447.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:48.132Z,1516700448.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:48.146Z,1516700448.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:40:48.148Z,1516700448.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:48.530Z,1516700448.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:48.545Z,1516700448.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:40:48.545Z,1516700448.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:48.932Z,1516700448.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:48.946Z,1516700448.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:40:48.948Z,1516700448.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:49.332Z,1516700449.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:49.346Z,1516700449.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:40:49.348Z,1516700449.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:49.731Z,1516700449.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:49.753Z,1516700449.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:40:49.754Z,1516700449.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:50.132Z,1516700450.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:50.146Z,1516700450.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:40:50.148Z,1516700450.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:50.532Z,1516700450.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:50.546Z,1516700450.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:40:50.548Z,1516700450.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:50.932Z,1516700450.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:50.946Z,1516700450.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:40:50.947Z,1516700450.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:51.332Z,1516700451.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:51.346Z,1516700451.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:40:51.348Z,1516700451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:51.732Z,1516700451.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:51.746Z,1516700451.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:40:51.748Z,1516700451.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:52.132Z,1516700452.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:52.146Z,1516700452.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:40:52.148Z,1516700452.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:52.532Z,1516700452.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:52.546Z,1516700452.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:40:52.548Z,1516700452.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:52.929Z,1516700452.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:52.944Z,1516700452.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:40:52.945Z,1516700452.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:53.331Z,1516700453.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:53.346Z,1516700453.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:40:53.347Z,1516700453.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:53.732Z,1516700453.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:53.746Z,1516700453.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:40:53.748Z,1516700453.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:54.132Z,1516700454.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:54.146Z,1516700454.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:40:54.148Z,1516700454.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:54.538Z,1516700454.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:54.560Z,1516700454.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:40:54.561Z,1516700454.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:54.908Z,1516700454.908 [NAL9602](INFO): NAL9602 initialized 2018-01-23T09:40:54.933Z,1516700454.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:54.962Z,1516700454.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:40:54.963Z,1516700454.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:55.333Z,1516700455.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:55.349Z,1516700455.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:40:55.349Z,1516700455.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:55.742Z,1516700455.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:55.758Z,1516700455.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:56.145Z,1516700456.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:56.164Z,1516700456.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:59.238Z,1516700459.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:59.254Z,1516700459.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:59.362Z,1516700459.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:59.398Z,1516700459.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:40:59.709Z,1516700459.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:40:59.740Z,1516700459.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:00.105Z,1516700460.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:00.119Z,1516700460.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:00.508Z,1516700460.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:00.523Z,1516700460.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:00.915Z,1516700460.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:00.930Z,1516700460.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:01.307Z,1516700461.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:01.322Z,1516700461.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:01.702Z,1516700461.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:01.728Z,1516700461.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:02.107Z,1516700462.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:02.122Z,1516700462.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:02.505Z,1516700462.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:02.520Z,1516700462.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:02.901Z,1516700462.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:02.929Z,1516700462.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:03.310Z,1516700463.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:03.325Z,1516700463.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:03.711Z,1516700463.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:03.732Z,1516700463.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:04.111Z,1516700464.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:04.126Z,1516700464.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:04.524Z,1516700464.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:04.554Z,1516700464.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:04.906Z,1516700464.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:04.928Z,1516700464.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:05.310Z,1516700465.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:05.325Z,1516700465.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:05.704Z,1516700465.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:05.731Z,1516700465.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:06.106Z,1516700466.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:06.129Z,1516700466.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:06.516Z,1516700466.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:06.531Z,1516700466.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:06.914Z,1516700466.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:06.929Z,1516700466.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:07.315Z,1516700467.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:07.330Z,1516700467.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:07.705Z,1516700467.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:07.720Z,1516700467.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:08.104Z,1516700468.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:08.120Z,1516700468.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:08.505Z,1516700468.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:08.520Z,1516700468.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:08.907Z,1516700468.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:08.922Z,1516700468.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:09.303Z,1516700469.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:09.318Z,1516700469.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:09.715Z,1516700469.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:09.737Z,1516700469.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:10.112Z,1516700470.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:10.140Z,1516700470.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:10.519Z,1516700470.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:10.534Z,1516700470.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:10.903Z,1516700470.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:10.929Z,1516700470.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:11.300Z,1516700471.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:11.331Z,1516700471.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:11.714Z,1516700471.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:11.729Z,1516700471.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:12.097Z,1516700472.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:12.124Z,1516700472.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:12.512Z,1516700472.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:12.539Z,1516700472.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:12.923Z,1516700472.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:12.945Z,1516700472.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:13.317Z,1516700473.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:13.331Z,1516700473.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:13.696Z,1516700473.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:13.734Z,1516700473.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:14.096Z,1516700474.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:14.133Z,1516700474.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:14.500Z,1516700474.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:14.527Z,1516700474.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:14.895Z,1516700474.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:14.922Z,1516700474.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:15.296Z,1516700475.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:15.334Z,1516700475.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:15.707Z,1516700475.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:15.749Z,1516700475.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:16.115Z,1516700476.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:16.151Z,1516700476.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:16.508Z,1516700476.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:16.522Z,1516700476.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:16.904Z,1516700476.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:16.921Z,1516700476.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:17.304Z,1516700477.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:17.319Z,1516700477.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:17.702Z,1516700477.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:17.729Z,1516700477.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:18.108Z,1516700478.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:18.122Z,1516700478.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:18.509Z,1516700478.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:18.529Z,1516700478.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:18.911Z,1516700478.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:18.926Z,1516700478.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:19.310Z,1516700479.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:19.325Z,1516700479.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:19.701Z,1516700479.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:19.720Z,1516700479.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:20.109Z,1516700480.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:20.124Z,1516700480.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:20.505Z,1516700480.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:20.519Z,1516700480.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:20.901Z,1516700480.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:20.923Z,1516700480.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:21.304Z,1516700481.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:21.319Z,1516700481.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:21.711Z,1516700481.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:21.726Z,1516700481.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:22.109Z,1516700482.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:22.129Z,1516700482.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:22.510Z,1516700482.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:22.529Z,1516700482.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:22.905Z,1516700482.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:22.920Z,1516700482.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:23.308Z,1516700483.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:23.324Z,1516700483.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:23.701Z,1516700483.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:23.722Z,1516700483.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:24.105Z,1516700484.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:24.124Z,1516700484.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:24.509Z,1516700484.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:24.529Z,1516700484.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:24.911Z,1516700484.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:24.926Z,1516700484.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:25.310Z,1516700485.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:25.332Z,1516700485.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:25.702Z,1516700485.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:25.717Z,1516700485.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:26.100Z,1516700486.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:26.129Z,1516700486.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:26.505Z,1516700486.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:26.520Z,1516700486.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:26.904Z,1516700486.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:26.922Z,1516700486.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:27.304Z,1516700487.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:27.320Z,1516700487.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:27.711Z,1516700487.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:27.725Z,1516700487.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:28.109Z,1516700488.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:28.129Z,1516700488.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:28.509Z,1516700488.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:28.529Z,1516700488.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:28.905Z,1516700488.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:28.919Z,1516700488.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:29.304Z,1516700489.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:29.325Z,1516700489.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:29.710Z,1516700489.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:29.725Z,1516700489.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:30.105Z,1516700490.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:30.124Z,1516700490.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:30.510Z,1516700490.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:30.532Z,1516700490.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:30.911Z,1516700490.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:30.926Z,1516700490.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:31.310Z,1516700491.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:31.333Z,1516700491.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:31.701Z,1516700491.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:31.720Z,1516700491.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:32.100Z,1516700492.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:32.129Z,1516700492.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:32.508Z,1516700492.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:32.523Z,1516700492.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:32.904Z,1516700492.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:32.922Z,1516700492.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:33.304Z,1516700493.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:33.319Z,1516700493.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:33.711Z,1516700493.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:33.725Z,1516700493.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:34.111Z,1516700494.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:34.126Z,1516700494.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:34.510Z,1516700494.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:34.529Z,1516700494.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:34.905Z,1516700494.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:34.920Z,1516700494.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:35.304Z,1516700495.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:35.319Z,1516700495.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:35.704Z,1516700495.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:35.732Z,1516700495.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:36.109Z,1516700496.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:36.124Z,1516700496.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:36.509Z,1516700496.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:36.529Z,1516700496.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:36.911Z,1516700496.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:36.926Z,1516700496.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:37.311Z,1516700497.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:37.326Z,1516700497.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:37.704Z,1516700497.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:37.719Z,1516700497.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:38.100Z,1516700498.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:38.133Z,1516700498.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:38.513Z,1516700498.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:38.528Z,1516700498.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:38.901Z,1516700498.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:38.924Z,1516700498.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:39.305Z,1516700499.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:39.325Z,1516700499.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:39.716Z,1516700499.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:39.731Z,1516700499.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:40.115Z,1516700500.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:40.129Z,1516700500.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:40.515Z,1516700500.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:40.537Z,1516700500.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:40.907Z,1516700500.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:40.922Z,1516700500.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:41.300Z,1516700501.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:41.324Z,1516700501.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:41.701Z,1516700501.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:41.725Z,1516700501.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:42.097Z,1516700502.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:42.133Z,1516700502.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:42.521Z,1516700502.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:42.541Z,1516700502.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:42.920Z,1516700502.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:42.935Z,1516700502.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:43.311Z,1516700503.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:43.349Z,1516700503.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:43.701Z,1516700503.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:43.728Z,1516700503.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:44.097Z,1516700504.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:44.125Z,1516700504.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:44.497Z,1516700504.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:44.535Z,1516700504.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:44.897Z,1516700504.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:44.925Z,1516700504.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:45.296Z,1516700505.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:45.313Z,1516700505.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:45.707Z,1516700505.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:45.745Z,1516700505.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:46.119Z,1516700506.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:46.150Z,1516700506.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:46.515Z,1516700506.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:46.548Z,1516700506.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:46.913Z,1516700506.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:46.945Z,1516700506.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:47.302Z,1516700507.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:47.317Z,1516700507.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:47.705Z,1516700507.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:47.725Z,1516700507.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:48.106Z,1516700508.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:48.121Z,1516700508.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:48.519Z,1516700508.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:48.534Z,1516700508.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:48.911Z,1516700508.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:48.926Z,1516700508.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:49.311Z,1516700509.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:49.326Z,1516700509.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:49.704Z,1516700509.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:49.727Z,1516700509.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:50.105Z,1516700510.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:50.120Z,1516700510.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:50.510Z,1516700510.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:50.537Z,1516700510.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:50.914Z,1516700510.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:50.929Z,1516700510.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:51.314Z,1516700511.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:51.329Z,1516700511.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:51.706Z,1516700511.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:51.725Z,1516700511.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:52.100Z,1516700512.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:52.123Z,1516700512.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:52.514Z,1516700512.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:52.534Z,1516700512.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:52.921Z,1516700512.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:52.936Z,1516700512.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:53.315Z,1516700513.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:53.335Z,1516700513.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:53.697Z,1516700513.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:53.738Z,1516700513.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:54.097Z,1516700514.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:54.124Z,1516700514.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:54.512Z,1516700514.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:54.534Z,1516700514.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:54.919Z,1516700514.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:54.941Z,1516700514.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:55.313Z,1516700515.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:55.336Z,1516700515.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:55.697Z,1516700515.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:55.729Z,1516700515.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:56.096Z,1516700516.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:56.122Z,1516700516.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:56.514Z,1516700516.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:56.538Z,1516700516.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:59.624Z,1516700519.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:59.640Z,1516700519.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:41:59.756Z,1516700519.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:41:59.801Z,1516700519.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:00.089Z,1516700520.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:00.129Z,1516700520.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:00.489Z,1516700520.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:00.503Z,1516700520.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:00.890Z,1516700520.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:00.905Z,1516700520.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:01.286Z,1516700521.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:01.305Z,1516700521.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:01.695Z,1516700521.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:01.710Z,1516700521.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:02.091Z,1516700522.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:02.106Z,1516700522.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:02.491Z,1516700522.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:02.506Z,1516700522.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:02.888Z,1516700522.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:02.902Z,1516700522.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:03.288Z,1516700523.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:03.302Z,1516700523.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:03.686Z,1516700523.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:03.713Z,1516700523.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:04.089Z,1516700524.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:04.104Z,1516700524.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:04.493Z,1516700524.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:04.513Z,1516700524.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:04.895Z,1516700524.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:04.910Z,1516700524.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:05.294Z,1516700525.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:05.309Z,1516700525.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:05.688Z,1516700525.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:05.706Z,1516700525.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:06.088Z,1516700526.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:06.103Z,1516700526.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:06.494Z,1516700526.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:06.509Z,1516700526.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:06.894Z,1516700526.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:06.913Z,1516700526.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:07.294Z,1516700527.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:07.313Z,1516700527.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:07.693Z,1516700527.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:07.707Z,1516700527.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:08.085Z,1516700528.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:08.104Z,1516700528.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:08.495Z,1516700528.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:08.510Z,1516700528.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:08.895Z,1516700528.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:08.910Z,1516700528.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:09.294Z,1516700529.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:09.313Z,1516700529.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:09.694Z,1516700529.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:09.709Z,1516700529.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:10.089Z,1516700530.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:10.104Z,1516700530.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:10.493Z,1516700530.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:10.513Z,1516700530.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:10.895Z,1516700530.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:10.910Z,1516700530.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:11.294Z,1516700531.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:11.316Z,1516700531.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:11.691Z,1516700531.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:11.706Z,1516700531.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:12.088Z,1516700532.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:12.103Z,1516700532.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:12.494Z,1516700532.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:12.516Z,1516700532.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:12.894Z,1516700532.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:12.913Z,1516700532.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:13.294Z,1516700533.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:13.313Z,1516700533.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:13.694Z,1516700533.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:13.709Z,1516700533.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:14.086Z,1516700534.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:14.101Z,1516700534.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:14.494Z,1516700534.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:14.517Z,1516700534.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:14.895Z,1516700534.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:14.910Z,1516700534.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:15.296Z,1516700535.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:15.310Z,1516700535.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:15.688Z,1516700535.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:15.709Z,1516700535.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:16.088Z,1516700536.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:16.115Z,1516700536.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:16.484Z,1516700536.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:16.505Z,1516700536.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:16.899Z,1516700536.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:16.914Z,1516700536.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:17.299Z,1516700537.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:17.321Z,1516700537.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:17.699Z,1516700537.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:17.714Z,1516700537.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:18.093Z,1516700538.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:18.108Z,1516700538.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:18.488Z,1516700538.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:18.509Z,1516700538.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:18.889Z,1516700538.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:18.908Z,1516700538.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:19.285Z,1516700539.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:19.304Z,1516700539.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:19.696Z,1516700539.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:19.725Z,1516700539.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:20.100Z,1516700540.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:20.127Z,1516700540.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:20.508Z,1516700540.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:20.529Z,1516700540.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:20.886Z,1516700540.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:20.914Z,1516700540.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:21.281Z,1516700541.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:21.313Z,1516700541.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:21.681Z,1516700541.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:21.713Z,1516700541.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:22.082Z,1516700542.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:22.122Z,1516700542.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:22.480Z,1516700542.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:22.514Z,1516700542.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:22.900Z,1516700542.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:22.919Z,1516700542.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:23.306Z,1516700543.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:23.321Z,1516700543.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:23.701Z,1516700543.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:23.717Z,1516700543.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:24.080Z,1516700544.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:24.107Z,1516700544.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:24.481Z,1516700544.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:24.517Z,1516700544.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:24.885Z,1516700544.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:24.918Z,1516700544.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:25.280Z,1516700545.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:25.317Z,1516700545.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:25.691Z,1516700545.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:25.727Z,1516700545.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:26.103Z,1516700546.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:26.120Z,1516700546.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:26.491Z,1516700546.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:26.526Z,1516700546.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:26.881Z,1516700546.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:26.917Z,1516700546.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:27.280Z,1516700547.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:27.317Z,1516700547.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:27.688Z,1516700547.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:27.721Z,1516700547.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:28.081Z,1516700548.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:28.121Z,1516700548.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:28.485Z,1516700548.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:28.521Z,1516700548.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:28.895Z,1516700548.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:28.934Z,1516700548.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:29.295Z,1516700549.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:29.329Z,1516700549.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:29.691Z,1516700549.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:29.718Z,1516700549.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:30.081Z,1516700550.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:30.121Z,1516700550.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:30.485Z,1516700550.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:30.500Z,1516700550.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:30.887Z,1516700550.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:30.902Z,1516700550.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:31.285Z,1516700551.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:31.305Z,1516700551.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:31.695Z,1516700551.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:31.710Z,1516700551.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:32.096Z,1516700552.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:32.111Z,1516700552.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:32.491Z,1516700552.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:32.507Z,1516700552.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:32.888Z,1516700552.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:32.909Z,1516700552.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:33.288Z,1516700553.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:33.303Z,1516700553.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:33.686Z,1516700553.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:33.709Z,1516700553.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:34.090Z,1516700554.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:34.105Z,1516700554.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:34.488Z,1516700554.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:34.503Z,1516700554.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:34.893Z,1516700554.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:34.913Z,1516700554.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:35.294Z,1516700555.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:35.308Z,1516700555.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:35.699Z,1516700555.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:35.714Z,1516700555.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:36.088Z,1516700556.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:36.103Z,1516700556.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:36.489Z,1516700556.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:36.503Z,1516700556.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:36.885Z,1516700556.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:36.907Z,1516700556.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:37.288Z,1516700557.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:37.303Z,1516700557.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:37.707Z,1516700557.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:37.722Z,1516700557.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:38.096Z,1516700558.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:38.110Z,1516700558.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:38.494Z,1516700558.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:38.509Z,1516700558.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:38.889Z,1516700558.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:38.904Z,1516700558.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:39.292Z,1516700559.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:39.308Z,1516700559.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:39.688Z,1516700559.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:39.703Z,1516700559.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:40.090Z,1516700560.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:40.112Z,1516700560.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:40.491Z,1516700560.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:40.506Z,1516700560.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:40.894Z,1516700560.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:40.913Z,1516700560.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:41.295Z,1516700561.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:41.309Z,1516700561.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:41.694Z,1516700561.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:41.713Z,1516700561.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:42.088Z,1516700562.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:42.109Z,1516700562.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:42.489Z,1516700562.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:42.504Z,1516700562.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:42.888Z,1516700562.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:42.907Z,1516700562.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:43.288Z,1516700563.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:43.303Z,1516700563.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:43.694Z,1516700563.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:43.716Z,1516700563.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:44.099Z,1516700564.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:44.114Z,1516700564.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:44.492Z,1516700564.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:44.513Z,1516700564.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:44.889Z,1516700564.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:44.904Z,1516700564.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:45.288Z,1516700565.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:45.303Z,1516700565.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:45.684Z,1516700565.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:45.713Z,1516700565.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:46.090Z,1516700566.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:46.112Z,1516700566.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:46.490Z,1516700566.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:46.505Z,1516700566.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:46.911Z,1516700566.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:46.926Z,1516700566.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:47.302Z,1516700567.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:47.317Z,1516700567.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:47.702Z,1516700567.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:47.717Z,1516700567.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:48.084Z,1516700568.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:48.106Z,1516700568.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:48.489Z,1516700568.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:48.505Z,1516700568.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:48.888Z,1516700568.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:48.908Z,1516700568.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:49.283Z,1516700569.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:49.315Z,1516700569.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:49.700Z,1516700569.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:49.715Z,1516700569.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:50.103Z,1516700570.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:50.118Z,1516700570.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:50.498Z,1516700570.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:50.513Z,1516700570.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:50.890Z,1516700570.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:50.908Z,1516700570.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:51.287Z,1516700571.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:51.307Z,1516700571.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:51.684Z,1516700571.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:51.706Z,1516700571.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:52.090Z,1516700572.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:52.108Z,1516700572.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:52.484Z,1516700572.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:52.507Z,1516700572.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:52.898Z,1516700572.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:52.914Z,1516700572.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:53.302Z,1516700573.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:53.324Z,1516700573.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:53.702Z,1516700573.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:53.717Z,1516700573.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:54.084Z,1516700574.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:54.106Z,1516700574.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:54.489Z,1516700574.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:54.508Z,1516700574.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:54.888Z,1516700574.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:54.908Z,1516700574.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:55.283Z,1516700575.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:55.316Z,1516700575.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:55.700Z,1516700575.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:55.720Z,1516700575.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:56.102Z,1516700576.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:56.117Z,1516700576.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:56.499Z,1516700576.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:56.514Z,1516700576.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:42:56.890Z,1516700576.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:42:56.905Z,1516700576.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:00.003Z,1516700580.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:00.018Z,1516700580.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:00.117Z,1516700580.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:00.156Z,1516700580.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:00.500Z,1516700580.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:00.515Z,1516700580.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:00.905Z,1516700580.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:00.920Z,1516700580.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:01.292Z,1516700581.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:01.315Z,1516700581.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:01.677Z,1516700581.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:01.706Z,1516700581.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:02.087Z,1516700582.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:02.114Z,1516700582.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:02.488Z,1516700582.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:02.509Z,1516700582.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:02.894Z,1516700582.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:02.909Z,1516700582.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:03.295Z,1516700583.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:03.310Z,1516700583.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:03.696Z,1516700583.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:03.711Z,1516700583.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:04.080Z,1516700584.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:04.105Z,1516700584.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:04.481Z,1516700584.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:04.505Z,1516700584.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:04.881Z,1516700584.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:04.904Z,1516700584.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:05.285Z,1516700585.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:05.301Z,1516700585.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:05.695Z,1516700585.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:05.717Z,1516700585.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:06.095Z,1516700586.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:06.110Z,1516700586.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:06.495Z,1516700586.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:06.510Z,1516700586.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:06.886Z,1516700586.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:06.909Z,1516700586.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:07.284Z,1516700587.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:07.304Z,1516700587.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:07.681Z,1516700587.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:07.715Z,1516700587.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:08.087Z,1516700588.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:08.103Z,1516700588.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:08.480Z,1516700588.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:08.513Z,1516700588.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:08.896Z,1516700588.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:08.915Z,1516700588.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:09.300Z,1516700589.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:09.315Z,1516700589.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:09.695Z,1516700589.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:09.717Z,1516700589.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:10.089Z,1516700590.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:10.109Z,1516700590.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:10.486Z,1516700590.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:10.502Z,1516700590.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:10.880Z,1516700590.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:10.912Z,1516700590.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:11.279Z,1516700591.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:11.303Z,1516700591.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:11.696Z,1516700591.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:11.711Z,1516700591.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:12.098Z,1516700592.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:12.114Z,1516700592.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:12.494Z,1516700592.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:12.509Z,1516700592.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:12.886Z,1516700592.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:12.908Z,1516700592.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:13.280Z,1516700593.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:13.302Z,1516700593.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:13.684Z,1516700593.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:13.711Z,1516700593.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:14.077Z,1516700594.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:14.109Z,1516700594.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:14.476Z,1516700594.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:14.508Z,1516700594.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:14.891Z,1516700594.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:14.913Z,1516700594.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:15.300Z,1516700595.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:15.314Z,1516700595.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:15.695Z,1516700595.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:15.710Z,1516700595.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:16.084Z,1516700596.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:16.110Z,1516700596.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:16.476Z,1516700596.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:16.509Z,1516700596.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:16.878Z,1516700596.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:16.912Z,1516700596.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:17.276Z,1516700597.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:17.309Z,1516700597.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:17.691Z,1516700597.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:17.714Z,1516700597.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:18.097Z,1516700598.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:18.125Z,1516700598.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:18.495Z,1516700598.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:18.510Z,1516700598.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:18.876Z,1516700598.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:18.914Z,1516700598.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:19.280Z,1516700599.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:19.307Z,1516700599.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:19.676Z,1516700599.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:19.709Z,1516700599.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:20.077Z,1516700600.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:20.116Z,1516700600.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:20.476Z,1516700600.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:20.513Z,1516700600.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:20.887Z,1516700600.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:20.918Z,1516700600.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:21.299Z,1516700601.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:21.325Z,1516700601.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:21.695Z,1516700601.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:21.721Z,1516700601.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:22.088Z,1516700602.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:22.124Z,1516700602.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:22.480Z,1516700602.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:22.495Z,1516700602.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:22.885Z,1516700602.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:22.900Z,1516700602.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:23.282Z,1516700603.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:23.305Z,1516700603.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:23.699Z,1516700603.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:23.731Z,1516700603.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:24.099Z,1516700604.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:24.130Z,1516700604.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:24.487Z,1516700604.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:24.502Z,1516700604.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:24.885Z,1516700604.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:24.899Z,1516700604.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:25.284Z,1516700605.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:25.298Z,1516700605.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:25.683Z,1516700605.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:25.698Z,1516700605.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:26.086Z,1516700606.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:26.100Z,1516700606.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:26.482Z,1516700606.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:26.506Z,1516700606.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:26.889Z,1516700606.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:26.909Z,1516700606.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:27.290Z,1516700607.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:27.305Z,1516700607.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:27.690Z,1516700607.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:27.713Z,1516700607.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:28.084Z,1516700608.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:28.105Z,1516700608.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:28.489Z,1516700608.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:28.504Z,1516700608.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:28.889Z,1516700608.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:28.905Z,1516700608.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:29.280Z,1516700609.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:29.303Z,1516700609.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:29.696Z,1516700609.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:29.710Z,1516700609.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:30.098Z,1516700610.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:30.117Z,1516700610.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:30.494Z,1516700610.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:30.509Z,1516700610.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:30.883Z,1516700610.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:30.908Z,1516700610.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:31.280Z,1516700611.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:31.302Z,1516700611.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:31.683Z,1516700611.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:31.698Z,1516700611.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:32.086Z,1516700612.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:32.104Z,1516700612.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:32.491Z,1516700612.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:32.506Z,1516700612.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:32.894Z,1516700612.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:32.910Z,1516700612.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:33.298Z,1516700613.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:33.320Z,1516700613.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:33.698Z,1516700613.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:33.717Z,1516700613.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:34.093Z,1516700614.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:34.113Z,1516700614.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:34.483Z,1516700614.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:34.508Z,1516700614.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:34.884Z,1516700614.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:34.904Z,1516700614.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:35.293Z,1516700615.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:35.308Z,1516700615.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:35.699Z,1516700615.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:35.714Z,1516700615.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:36.098Z,1516700616.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:36.113Z,1516700616.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:36.507Z,1516700616.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:36.529Z,1516700616.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:36.529Z,1516700616.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129 2018-01-23T09:43:36.529Z,1516700616.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:43:36.548Z,1516700616.548 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:36.548Z,1516700616.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 129 2018-01-23T09:43:36.548Z,1516700616.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:43:36.549Z,1516700616.549 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:36.550Z,1516700616.550 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129 2018-01-23T09:43:36.550Z,1516700616.550 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:43:36.574Z,1516700616.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:43:36.574Z,1516700616.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:43:36.577Z,1516700616.577 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:43:36.877Z,1516700616.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:36.923Z,1516700616.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:43:36.924Z,1516700616.924 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129 2018-01-23T09:43:36.924Z,1516700616.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:43:36.924Z,1516700616.924 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 129 2018-01-23T09:43:36.925Z,1516700616.925 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:43:36.925Z,1516700616.925 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129 2018-01-23T09:43:37.297Z,1516700617.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:37.312Z,1516700617.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:43:37.312Z,1516700617.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:43:37.313Z,1516700617.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:43:37.313Z,1516700617.313 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:43:37.313Z,1516700617.313 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:43:37.314Z,1516700617.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:43:37.314Z,1516700617.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:43:37.315Z,1516700617.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:43:37.315Z,1516700617.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:43:37.681Z,1516700617.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:37.713Z,1516700617.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:43:37.714Z,1516700617.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:38.077Z,1516700618.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:38.113Z,1516700618.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:43:38.114Z,1516700618.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:38.481Z,1516700618.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:38.512Z,1516700618.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:43:38.513Z,1516700618.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:38.908Z,1516700618.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:38.923Z,1516700618.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:43:38.924Z,1516700618.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:39.308Z,1516700619.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:39.322Z,1516700619.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:43:39.323Z,1516700619.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:39.704Z,1516700619.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:39.724Z,1516700619.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:43:39.725Z,1516700619.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:40.084Z,1516700620.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:40.110Z,1516700620.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:43:40.112Z,1516700620.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:40.484Z,1516700620.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:40.511Z,1516700620.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:43:40.512Z,1516700620.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:40.886Z,1516700620.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:40.912Z,1516700620.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:43:40.913Z,1516700620.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:41.277Z,1516700621.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:41.313Z,1516700621.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:43:41.314Z,1516700621.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:41.688Z,1516700621.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:41.728Z,1516700621.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:43:41.729Z,1516700621.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:42.095Z,1516700622.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:42.118Z,1516700622.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:43:42.123Z,1516700622.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:42.500Z,1516700622.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:42.530Z,1516700622.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:43:42.532Z,1516700622.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:42.885Z,1516700622.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:42.900Z,1516700622.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:43:42.901Z,1516700622.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:43.281Z,1516700623.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:43.309Z,1516700623.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:43:43.310Z,1516700623.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:43.684Z,1516700623.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:43.712Z,1516700623.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:43:43.713Z,1516700623.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:44.091Z,1516700624.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:44.106Z,1516700624.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:43:44.107Z,1516700624.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:44.484Z,1516700624.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:44.499Z,1516700624.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:43:44.500Z,1516700624.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:44.896Z,1516700624.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:44.911Z,1516700624.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:43:44.912Z,1516700624.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:45.296Z,1516700625.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:45.310Z,1516700625.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:43:45.312Z,1516700625.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:45.696Z,1516700625.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:45.710Z,1516700625.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:43:45.711Z,1516700625.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:46.093Z,1516700626.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:46.108Z,1516700626.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:43:46.109Z,1516700626.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:46.487Z,1516700626.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:46.501Z,1516700626.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:43:46.502Z,1516700626.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:46.886Z,1516700626.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:46.909Z,1516700626.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:43:46.910Z,1516700626.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:47.297Z,1516700627.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:47.320Z,1516700627.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:43:47.321Z,1516700627.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:47.702Z,1516700627.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:47.716Z,1516700627.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:43:47.717Z,1516700627.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:48.100Z,1516700628.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:48.114Z,1516700628.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:43:48.115Z,1516700628.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:48.492Z,1516700628.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:48.514Z,1516700628.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:43:48.515Z,1516700628.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:48.888Z,1516700628.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:48.912Z,1516700628.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:43:48.913Z,1516700628.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:49.293Z,1516700629.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:49.312Z,1516700629.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:43:49.313Z,1516700629.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:49.692Z,1516700629.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:49.724Z,1516700629.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:43:49.725Z,1516700629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:50.100Z,1516700630.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:50.115Z,1516700630.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:43:50.116Z,1516700630.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:50.499Z,1516700630.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:50.520Z,1516700630.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:43:50.521Z,1516700630.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:50.893Z,1516700630.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:50.908Z,1516700630.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:43:50.909Z,1516700630.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:51.276Z,1516700631.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:51.310Z,1516700631.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:43:51.312Z,1516700631.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:51.700Z,1516700631.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:51.714Z,1516700631.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:43:51.716Z,1516700631.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:52.098Z,1516700632.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:52.113Z,1516700632.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:43:52.114Z,1516700632.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:52.499Z,1516700632.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:52.513Z,1516700632.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:43:52.514Z,1516700632.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:52.893Z,1516700632.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:52.908Z,1516700632.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:43:52.909Z,1516700632.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:53.278Z,1516700633.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:53.317Z,1516700633.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:43:53.318Z,1516700633.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:53.696Z,1516700633.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:53.711Z,1516700633.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:43:53.712Z,1516700633.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:54.102Z,1516700634.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:54.117Z,1516700634.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:43:54.118Z,1516700634.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:54.503Z,1516700634.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:54.517Z,1516700634.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:43:54.518Z,1516700634.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:54.878Z,1516700634.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:54.912Z,1516700634.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:43:54.913Z,1516700634.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:55.279Z,1516700635.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:55.316Z,1516700635.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:43:55.317Z,1516700635.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:55.325Z,1516700635.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:38:55.0Z 2018-01-23T09:43:55.325Z,1516700635.325 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:43:55.325Z,1516700635.325 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:43:55.699Z,1516700635.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:55.714Z,1516700635.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:43:55.715Z,1516700635.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:56.215Z,1516700636.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:56.229Z,1516700636.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T09:43:56.230Z,1516700636.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:56.490Z,1516700636.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:56.525Z,1516700636.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:43:56.526Z,1516700636.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:59.585Z,1516700639.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:59.608Z,1516700639.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:43:59.697Z,1516700639.697 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0152.lzma 2018-01-23T09:43:59.731Z,1516700639.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:43:59.767Z,1516700639.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:00.063Z,1516700640.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:00.093Z,1516700640.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:00.433Z,1516700640.433 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0152.lzma.bak 2018-01-23T09:44:00.433Z,1516700640.433 [DataOverHttps](INFO): SBD MOMSN=7755372 2018-01-23T09:44:00.490Z,1516700640.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:00.505Z,1516700640.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:01.108Z,1516700641.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:01.138Z,1516700641.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:01.253Z,1516700641.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:01.292Z,1516700641.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:04.357Z,1516700644.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:04.386Z,1516700644.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:04.478Z,1516700644.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:04.513Z,1516700644.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:04.843Z,1516700644.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:04.859Z,1516700644.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:05.256Z,1516700645.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:05.270Z,1516700645.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:05.647Z,1516700645.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:05.663Z,1516700645.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:06.037Z,1516700646.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:06.053Z,1516700646.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:09.144Z,1516700649.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:09.160Z,1516700649.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:09.239Z,1516700649.239 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0153.lzma 2018-01-23T09:44:09.260Z,1516700649.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:09.305Z,1516700649.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:09.620Z,1516700649.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:09.649Z,1516700649.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:09.989Z,1516700649.989 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0153.lzma.bak 2018-01-23T09:44:09.989Z,1516700649.989 [DataOverHttps](INFO): SBD MOMSN=7755375 2018-01-23T09:44:10.048Z,1516700650.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:10.063Z,1516700650.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:10.652Z,1516700650.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:10.667Z,1516700650.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:10.670Z,1516700650.670 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:44:10.670Z,1516700650.670 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:44:10.670Z,1516700650.670 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:44:10.810Z,1516700650.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:10.849Z,1516700650.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:13.944Z,1516700653.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:13.960Z,1516700653.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:14.058Z,1516700654.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:14.099Z,1516700654.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:14.423Z,1516700654.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:14.449Z,1516700654.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:14.836Z,1516700654.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:14.851Z,1516700654.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:15.223Z,1516700655.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:15.253Z,1516700655.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:15.609Z,1516700655.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:15.646Z,1516700655.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:16.009Z,1516700656.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:16.025Z,1516700656.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:16.407Z,1516700656.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:16.423Z,1516700656.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:16.815Z,1516700656.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:16.830Z,1516700656.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:17.268Z,1516700657.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:17.284Z,1516700657.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:17.614Z,1516700657.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:17.629Z,1516700657.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:18.009Z,1516700658.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:18.024Z,1516700658.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:18.410Z,1516700658.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:18.425Z,1516700658.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:18.808Z,1516700658.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:18.829Z,1516700658.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:19.208Z,1516700659.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:19.229Z,1516700659.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:19.609Z,1516700659.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:19.625Z,1516700659.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:19.638Z,1516700659.638 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:44:20.014Z,1516700660.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:20.029Z,1516700660.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:20.415Z,1516700660.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:20.431Z,1516700660.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:20.815Z,1516700660.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:20.829Z,1516700660.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:21.208Z,1516700661.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:21.229Z,1516700661.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:21.612Z,1516700661.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:21.633Z,1516700661.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:22.003Z,1516700662.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:22.017Z,1516700662.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:22.405Z,1516700662.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:22.425Z,1516700662.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:22.815Z,1516700662.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:22.830Z,1516700662.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:23.223Z,1516700663.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:23.265Z,1516700663.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:23.615Z,1516700663.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:23.630Z,1516700663.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:24.002Z,1516700664.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:24.017Z,1516700664.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:24.400Z,1516700664.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:24.415Z,1516700664.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:24.802Z,1516700664.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:24.817Z,1516700664.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:25.213Z,1516700665.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:25.228Z,1516700665.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:25.602Z,1516700665.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:25.616Z,1516700665.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:26.015Z,1516700666.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:26.031Z,1516700666.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:26.428Z,1516700666.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:26.455Z,1516700666.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:26.810Z,1516700666.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:26.836Z,1516700666.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:27.200Z,1516700667.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:27.232Z,1516700667.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:27.609Z,1516700667.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:27.635Z,1516700667.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:28.001Z,1516700668.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:28.037Z,1516700668.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:28.404Z,1516700668.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:28.431Z,1516700668.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:28.819Z,1516700668.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:28.834Z,1516700668.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:29.223Z,1516700669.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:29.238Z,1516700669.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:29.619Z,1516700669.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:29.634Z,1516700669.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:30.001Z,1516700670.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:30.037Z,1516700670.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:30.400Z,1516700670.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:30.437Z,1516700670.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:30.800Z,1516700670.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:30.832Z,1516700670.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:31.201Z,1516700671.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:31.233Z,1516700671.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:31.604Z,1516700671.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:31.637Z,1516700671.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:32.023Z,1516700672.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:32.039Z,1516700672.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:32.423Z,1516700672.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:32.439Z,1516700672.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:32.810Z,1516700672.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:32.845Z,1516700672.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:33.204Z,1516700673.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:33.236Z,1516700673.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:33.600Z,1516700673.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:33.636Z,1516700673.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:34.001Z,1516700674.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:34.037Z,1516700674.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:34.404Z,1516700674.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:34.437Z,1516700674.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:34.811Z,1516700674.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:34.849Z,1516700674.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:35.229Z,1516700675.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:35.243Z,1516700675.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:35.615Z,1516700675.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:35.642Z,1516700675.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:36.000Z,1516700676.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:36.037Z,1516700676.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:36.401Z,1516700676.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:36.416Z,1516700676.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:36.804Z,1516700676.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:36.841Z,1516700676.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:37.209Z,1516700677.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:37.224Z,1516700677.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:37.605Z,1516700677.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:37.619Z,1516700677.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:38.023Z,1516700678.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:38.048Z,1516700678.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:38.427Z,1516700678.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:38.453Z,1516700678.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:38.823Z,1516700678.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:38.848Z,1516700678.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:39.208Z,1516700679.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:39.229Z,1516700679.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:39.610Z,1516700679.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:39.625Z,1516700679.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:40.008Z,1516700680.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:40.033Z,1516700680.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:40.410Z,1516700680.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:40.425Z,1516700680.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:40.812Z,1516700680.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:40.827Z,1516700680.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:41.215Z,1516700681.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:41.230Z,1516700681.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:41.611Z,1516700681.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:41.626Z,1516700681.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:42.007Z,1516700682.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:42.022Z,1516700682.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:42.408Z,1516700682.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:42.422Z,1516700682.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:42.806Z,1516700682.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:42.828Z,1516700682.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:43.208Z,1516700683.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:43.223Z,1516700683.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:43.608Z,1516700683.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:43.622Z,1516700683.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:44.011Z,1516700684.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:44.027Z,1516700684.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:44.415Z,1516700684.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:44.430Z,1516700684.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:44.811Z,1516700684.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:44.832Z,1516700684.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:45.210Z,1516700685.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:45.225Z,1516700685.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:45.611Z,1516700685.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:45.632Z,1516700685.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:46.010Z,1516700686.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:46.024Z,1516700686.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:46.408Z,1516700686.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:46.423Z,1516700686.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:46.811Z,1516700686.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:46.826Z,1516700686.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:47.215Z,1516700687.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:47.236Z,1516700687.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:47.623Z,1516700687.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:47.638Z,1516700687.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:48.010Z,1516700688.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:48.029Z,1516700688.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:48.411Z,1516700688.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:48.425Z,1516700688.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:48.808Z,1516700688.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:48.828Z,1516700688.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:49.219Z,1516700689.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:49.234Z,1516700689.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:49.614Z,1516700689.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:49.629Z,1516700689.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:50.016Z,1516700690.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:50.032Z,1516700690.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:50.416Z,1516700690.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:50.431Z,1516700690.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:50.815Z,1516700690.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:50.830Z,1516700690.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:51.212Z,1516700691.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:51.228Z,1516700691.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:51.609Z,1516700691.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:51.624Z,1516700691.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:52.012Z,1516700692.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:52.027Z,1516700692.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:52.409Z,1516700692.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:52.425Z,1516700692.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:52.814Z,1516700692.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:52.837Z,1516700692.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:53.220Z,1516700693.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:53.235Z,1516700693.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:53.619Z,1516700693.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:53.635Z,1516700693.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:54.004Z,1516700694.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:54.026Z,1516700694.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:54.410Z,1516700694.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:54.425Z,1516700694.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:54.810Z,1516700694.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:54.825Z,1516700694.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:55.209Z,1516700695.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:55.228Z,1516700695.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:55.611Z,1516700695.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:55.626Z,1516700695.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:56.017Z,1516700696.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:56.040Z,1516700696.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:56.423Z,1516700696.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:56.438Z,1516700696.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:56.822Z,1516700696.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:56.836Z,1516700696.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:57.204Z,1516700697.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:57.235Z,1516700697.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:57.600Z,1516700697.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:57.640Z,1516700697.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:58.009Z,1516700698.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:58.037Z,1516700698.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:58.405Z,1516700698.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:58.432Z,1516700698.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:58.819Z,1516700698.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:58.835Z,1516700698.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:59.224Z,1516700699.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:59.239Z,1516700699.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:44:59.615Z,1516700699.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:44:59.638Z,1516700699.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:00.000Z,1516700700.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:00.036Z,1516700700.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:00.400Z,1516700700.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:00.433Z,1516700700.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:00.798Z,1516700700.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:00.821Z,1516700700.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:01.201Z,1516700701.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:01.232Z,1516700701.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:01.600Z,1516700701.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:01.644Z,1516700701.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:02.011Z,1516700702.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:02.038Z,1516700702.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:02.415Z,1516700702.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:02.449Z,1516700702.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:02.811Z,1516700702.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:02.845Z,1516700702.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:03.200Z,1516700703.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:03.237Z,1516700703.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:03.604Z,1516700703.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:03.656Z,1516700703.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:04.010Z,1516700704.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:04.024Z,1516700704.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:04.405Z,1516700704.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:04.425Z,1516700704.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:04.815Z,1516700704.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:04.830Z,1516700704.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:05.215Z,1516700705.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:05.229Z,1516700705.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:05.612Z,1516700705.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:05.626Z,1516700705.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:06.006Z,1516700706.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:06.029Z,1516700706.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:06.410Z,1516700706.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:06.424Z,1516700706.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:06.814Z,1516700706.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:06.833Z,1516700706.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:07.219Z,1516700707.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:07.234Z,1516700707.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:07.614Z,1516700707.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:07.629Z,1516700707.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:08.012Z,1516700708.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:08.033Z,1516700708.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:08.408Z,1516700708.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:08.423Z,1516700708.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:08.814Z,1516700708.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:08.836Z,1516700708.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:09.219Z,1516700709.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:09.234Z,1516700709.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:09.613Z,1516700709.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:09.633Z,1516700709.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:10.010Z,1516700710.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:10.025Z,1516700710.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:10.408Z,1516700710.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:10.423Z,1516700710.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:10.814Z,1516700710.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:10.829Z,1516700710.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:11.216Z,1516700711.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:11.230Z,1516700711.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:14.315Z,1516700714.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:14.337Z,1516700714.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:14.437Z,1516700714.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:14.473Z,1516700714.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:14.813Z,1516700714.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:14.828Z,1516700714.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:15.216Z,1516700715.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:15.235Z,1516700715.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:15.612Z,1516700715.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:15.627Z,1516700715.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:16.022Z,1516700716.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:16.044Z,1516700716.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:16.423Z,1516700716.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:16.438Z,1516700716.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:16.822Z,1516700716.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:16.845Z,1516700716.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:17.217Z,1516700717.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:17.232Z,1516700717.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:17.609Z,1516700717.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:17.629Z,1516700717.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:18.022Z,1516700718.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:18.037Z,1516700718.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:18.414Z,1516700718.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:18.428Z,1516700718.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:18.818Z,1516700718.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:18.838Z,1516700718.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:19.226Z,1516700719.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:19.241Z,1516700719.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:19.627Z,1516700719.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:19.649Z,1516700719.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:20.018Z,1516700720.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:20.033Z,1516700720.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:20.408Z,1516700720.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:20.430Z,1516700720.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:20.823Z,1516700720.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:20.838Z,1516700720.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:21.226Z,1516700721.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:21.245Z,1516700721.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:21.626Z,1516700721.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:21.641Z,1516700721.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:22.018Z,1516700722.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:22.033Z,1516700722.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:22.416Z,1516700722.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:22.431Z,1516700722.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:22.822Z,1516700722.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:22.838Z,1516700722.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:23.227Z,1516700723.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:23.242Z,1516700723.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:23.622Z,1516700723.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:23.637Z,1516700723.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:24.012Z,1516700724.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:24.032Z,1516700724.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:24.407Z,1516700724.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:24.446Z,1516700724.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:24.822Z,1516700724.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:24.838Z,1516700724.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:25.227Z,1516700725.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:25.242Z,1516700725.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:25.622Z,1516700725.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:25.646Z,1516700725.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:26.012Z,1516700726.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:26.032Z,1516700726.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:26.425Z,1516700726.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:26.440Z,1516700726.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:26.822Z,1516700726.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:26.846Z,1516700726.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:27.228Z,1516700727.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:27.242Z,1516700727.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:27.631Z,1516700727.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:27.653Z,1516700727.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:28.023Z,1516700728.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:28.038Z,1516700728.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:28.406Z,1516700728.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:28.433Z,1516700728.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:28.832Z,1516700728.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:28.847Z,1516700728.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:29.227Z,1516700729.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:29.248Z,1516700729.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:29.620Z,1516700729.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:29.652Z,1516700729.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:30.006Z,1516700730.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:30.034Z,1516700730.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:30.405Z,1516700730.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:30.443Z,1516700730.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:30.820Z,1516700730.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:30.852Z,1516700730.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:31.223Z,1516700731.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:31.256Z,1516700731.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:31.624Z,1516700731.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:31.644Z,1516700731.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:32.005Z,1516700732.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:32.040Z,1516700732.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:32.405Z,1516700732.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:32.436Z,1516700732.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:32.819Z,1516700732.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:32.853Z,1516700732.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:33.220Z,1516700733.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:33.257Z,1516700733.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:33.624Z,1516700733.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:33.662Z,1516700733.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:34.018Z,1516700734.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:34.048Z,1516700734.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:34.409Z,1516700734.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:34.425Z,1516700734.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:34.824Z,1516700734.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:34.852Z,1516700734.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:35.240Z,1516700735.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:35.260Z,1516700735.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:35.623Z,1516700735.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:35.657Z,1516700735.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:36.009Z,1516700736.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:36.024Z,1516700736.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:36.416Z,1516700736.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:36.460Z,1516700736.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:36.819Z,1516700736.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:36.834Z,1516700736.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:37.223Z,1516700737.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:37.238Z,1516700737.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:37.616Z,1516700737.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:37.631Z,1516700737.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:38.010Z,1516700738.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:38.029Z,1516700738.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:38.412Z,1516700738.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:38.427Z,1516700738.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:38.818Z,1516700738.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:38.834Z,1516700738.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:39.219Z,1516700739.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:39.234Z,1516700739.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:39.618Z,1516700739.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:39.633Z,1516700739.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:40.018Z,1516700740.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:40.033Z,1516700740.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:40.412Z,1516700740.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:40.427Z,1516700740.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:40.818Z,1516700740.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:40.833Z,1516700740.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:41.219Z,1516700741.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:41.234Z,1516700741.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:41.617Z,1516700741.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:41.637Z,1516700741.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:42.013Z,1516700742.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:42.028Z,1516700742.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:42.413Z,1516700742.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:42.428Z,1516700742.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:42.817Z,1516700742.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:42.837Z,1516700742.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:43.218Z,1516700743.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:43.233Z,1516700743.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:43.619Z,1516700743.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:43.634Z,1516700743.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:44.012Z,1516700744.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:44.033Z,1516700744.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:44.415Z,1516700744.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:44.430Z,1516700744.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:44.813Z,1516700744.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:44.828Z,1516700744.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:45.217Z,1516700745.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:45.237Z,1516700745.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:45.623Z,1516700745.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:45.638Z,1516700745.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:46.019Z,1516700746.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:46.034Z,1516700746.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:46.417Z,1516700746.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:46.433Z,1516700746.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:46.817Z,1516700746.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:46.832Z,1516700746.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:47.209Z,1516700747.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:47.236Z,1516700747.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:47.614Z,1516700747.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:47.637Z,1516700747.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:48.024Z,1516700748.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:48.048Z,1516700748.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:48.433Z,1516700748.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:48.457Z,1516700748.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:48.829Z,1516700748.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:48.852Z,1516700748.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:49.206Z,1516700749.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:49.242Z,1516700749.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:49.637Z,1516700749.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:49.669Z,1516700749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:50.010Z,1516700750.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:50.054Z,1516700750.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:50.416Z,1516700750.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:50.453Z,1516700750.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:50.827Z,1516700750.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:50.868Z,1516700750.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:51.215Z,1516700751.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:51.231Z,1516700751.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:51.619Z,1516700751.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:51.634Z,1516700751.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:52.023Z,1516700752.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:52.038Z,1516700752.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:52.412Z,1516700752.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:52.427Z,1516700752.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:52.813Z,1516700752.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:52.845Z,1516700752.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:53.220Z,1516700753.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:53.245Z,1516700753.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:53.630Z,1516700753.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:53.686Z,1516700753.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:54.037Z,1516700754.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:54.057Z,1516700754.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:54.432Z,1516700754.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:54.493Z,1516700754.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:54.817Z,1516700754.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:54.852Z,1516700754.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:55.214Z,1516700755.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:55.260Z,1516700755.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:55.620Z,1516700755.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:55.645Z,1516700755.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:56.020Z,1516700756.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:56.049Z,1516700756.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:56.411Z,1516700756.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:56.453Z,1516700756.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:56.819Z,1516700756.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:56.878Z,1516700756.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:57.218Z,1516700757.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:57.233Z,1516700757.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:57.628Z,1516700757.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:57.651Z,1516700757.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:58.031Z,1516700758.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:58.054Z,1516700758.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:58.407Z,1516700758.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:58.443Z,1516700758.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:58.806Z,1516700758.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:58.845Z,1516700758.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:59.211Z,1516700759.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:59.255Z,1516700759.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:45:59.610Z,1516700759.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:45:59.658Z,1516700759.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:00.020Z,1516700760.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:00.061Z,1516700760.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:00.425Z,1516700760.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:00.471Z,1516700760.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:00.824Z,1516700760.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:00.844Z,1516700760.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:01.206Z,1516700761.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:01.237Z,1516700761.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:01.619Z,1516700761.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:01.650Z,1516700761.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:02.006Z,1516700762.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:02.050Z,1516700762.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:02.412Z,1516700762.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:02.437Z,1516700762.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:02.816Z,1516700762.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:02.854Z,1516700762.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:03.221Z,1516700763.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:03.261Z,1516700763.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:03.623Z,1516700763.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:03.645Z,1516700763.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:04.041Z,1516700764.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:04.056Z,1516700764.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:04.409Z,1516700764.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:04.429Z,1516700764.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:04.810Z,1516700764.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:04.825Z,1516700764.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:05.218Z,1516700765.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:05.233Z,1516700765.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:05.611Z,1516700765.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:05.627Z,1516700765.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:06.020Z,1516700766.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:06.035Z,1516700766.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:06.436Z,1516700766.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:06.460Z,1516700766.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:06.815Z,1516700766.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:06.831Z,1516700766.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:07.214Z,1516700767.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:07.229Z,1516700767.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:07.619Z,1516700767.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:07.633Z,1516700767.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:08.011Z,1516700768.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:08.030Z,1516700768.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:08.418Z,1516700768.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:08.433Z,1516700768.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:08.815Z,1516700768.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:08.830Z,1516700768.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:09.219Z,1516700769.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:09.234Z,1516700769.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:09.624Z,1516700769.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:09.639Z,1516700769.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:10.024Z,1516700770.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:10.039Z,1516700770.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:10.409Z,1516700770.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:10.432Z,1516700770.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:10.814Z,1516700770.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:10.830Z,1516700770.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:11.214Z,1516700771.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:11.230Z,1516700771.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:14.306Z,1516700774.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:14.321Z,1516700774.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:14.427Z,1516700774.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:14.465Z,1516700774.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:14.779Z,1516700774.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:14.794Z,1516700774.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:15.190Z,1516700775.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:15.224Z,1516700775.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:15.569Z,1516700775.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:15.585Z,1516700775.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:15.968Z,1516700775.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:15.991Z,1516700775.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:16.374Z,1516700776.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:16.478Z,1516700776.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:16.770Z,1516700776.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:16.793Z,1516700776.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:17.178Z,1516700777.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:17.197Z,1516700777.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:17.579Z,1516700777.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:17.600Z,1516700777.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:17.979Z,1516700777.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:17.994Z,1516700777.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:18.366Z,1516700778.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:18.381Z,1516700778.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:18.766Z,1516700778.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:18.780Z,1516700778.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:19.206Z,1516700779.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:19.225Z,1516700779.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:19.566Z,1516700779.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:19.581Z,1516700779.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:19.979Z,1516700779.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:19.994Z,1516700779.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:20.375Z,1516700780.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:20.390Z,1516700780.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:20.779Z,1516700780.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:20.794Z,1516700780.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:21.168Z,1516700781.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:21.183Z,1516700781.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:21.562Z,1516700781.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:21.578Z,1516700781.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:21.965Z,1516700781.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:22.014Z,1516700782.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:22.366Z,1516700782.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:22.408Z,1516700782.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:22.765Z,1516700782.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:22.800Z,1516700782.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:23.176Z,1516700783.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:23.209Z,1516700783.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:23.589Z,1516700783.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:23.603Z,1516700783.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:23.975Z,1516700783.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:24.010Z,1516700784.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:24.373Z,1516700784.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:24.398Z,1516700784.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:24.765Z,1516700784.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:24.801Z,1516700784.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:25.170Z,1516700785.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:25.201Z,1516700785.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:25.565Z,1516700785.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:25.601Z,1516700785.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:25.975Z,1516700785.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:26.012Z,1516700786.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:26.392Z,1516700786.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:26.407Z,1516700786.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:26.775Z,1516700786.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:26.809Z,1516700786.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:27.165Z,1516700787.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:27.201Z,1516700787.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:27.565Z,1516700787.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:27.600Z,1516700787.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:27.965Z,1516700787.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:28.001Z,1516700788.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:28.366Z,1516700788.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:28.404Z,1516700788.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:28.762Z,1516700788.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:28.777Z,1516700788.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:29.176Z,1516700789.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:29.202Z,1516700789.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:29.579Z,1516700789.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:29.614Z,1516700789.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:29.976Z,1516700789.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:30.009Z,1516700790.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:30.365Z,1516700790.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:30.401Z,1516700790.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:30.769Z,1516700790.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:30.805Z,1516700790.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:31.173Z,1516700791.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:31.189Z,1516700791.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:31.573Z,1516700791.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:31.588Z,1516700791.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:31.979Z,1516700791.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:31.994Z,1516700791.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:32.391Z,1516700792.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:32.421Z,1516700792.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:32.779Z,1516700792.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:32.794Z,1516700792.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:33.174Z,1516700793.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:33.193Z,1516700793.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:33.572Z,1516700793.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:33.587Z,1516700793.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:33.972Z,1516700793.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:33.987Z,1516700793.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:34.369Z,1516700794.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:34.392Z,1516700794.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:34.768Z,1516700794.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:34.791Z,1516700794.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:35.182Z,1516700795.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:35.197Z,1516700795.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:35.583Z,1516700795.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:35.605Z,1516700795.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:35.980Z,1516700795.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:36.007Z,1516700796.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:36.365Z,1516700796.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:36.394Z,1516700796.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:36.765Z,1516700796.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:36.801Z,1516700796.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:37.169Z,1516700797.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:37.196Z,1516700797.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:37.565Z,1516700797.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:37.597Z,1516700797.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:37.597Z,1516700797.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130 2018-01-23T09:46:37.597Z,1516700797.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:46:37.603Z,1516700797.603 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:37.603Z,1516700797.603 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 130 2018-01-23T09:46:37.603Z,1516700797.603 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:46:37.605Z,1516700797.605 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:37.605Z,1516700797.605 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130 2018-01-23T09:46:37.605Z,1516700797.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:46:37.625Z,1516700797.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:46:37.626Z,1516700797.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:46:37.626Z,1516700797.626 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:46:37.979Z,1516700797.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:38.039Z,1516700798.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:46:38.039Z,1516700798.039 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130 2018-01-23T09:46:38.040Z,1516700798.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:46:38.040Z,1516700798.040 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 130 2018-01-23T09:46:38.040Z,1516700798.040 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:46:38.040Z,1516700798.040 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130 2018-01-23T09:46:38.387Z,1516700798.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:38.412Z,1516700798.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:46:38.413Z,1516700798.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:46:38.413Z,1516700798.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:46:38.413Z,1516700798.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:46:38.414Z,1516700798.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:46:38.414Z,1516700798.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:46:38.415Z,1516700798.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:46:38.415Z,1516700798.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:46:38.415Z,1516700798.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:46:38.787Z,1516700798.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:38.816Z,1516700798.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:46:38.817Z,1516700798.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:39.177Z,1516700799.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:39.207Z,1516700799.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:46:39.208Z,1516700799.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:39.569Z,1516700799.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:39.588Z,1516700799.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:46:39.589Z,1516700799.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:39.973Z,1516700799.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:39.992Z,1516700799.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:46:39.993Z,1516700799.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:40.373Z,1516700800.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:40.391Z,1516700800.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:46:40.392Z,1516700800.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:40.772Z,1516700800.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:40.791Z,1516700800.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:46:40.792Z,1516700800.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:41.180Z,1516700801.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:41.195Z,1516700801.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:46:41.196Z,1516700801.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:41.591Z,1516700801.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:41.622Z,1516700801.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:46:41.627Z,1516700801.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:41.984Z,1516700801.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:41.998Z,1516700801.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:46:41.999Z,1516700801.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:42.383Z,1516700802.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:42.398Z,1516700802.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:46:42.399Z,1516700802.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:42.772Z,1516700802.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:42.794Z,1516700802.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:46:42.795Z,1516700802.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:43.174Z,1516700803.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:43.200Z,1516700803.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:46:43.201Z,1516700803.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:43.583Z,1516700803.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:43.598Z,1516700803.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:46:43.599Z,1516700803.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:43.984Z,1516700803.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:44.001Z,1516700804.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:46:44.002Z,1516700804.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:44.383Z,1516700804.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:44.405Z,1516700804.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:46:44.406Z,1516700804.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:44.784Z,1516700804.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:44.805Z,1516700804.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:46:44.806Z,1516700804.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:45.183Z,1516700805.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:45.198Z,1516700805.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:46:45.199Z,1516700805.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:45.569Z,1516700805.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:45.596Z,1516700805.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:46:45.597Z,1516700805.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:45.979Z,1516700805.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:45.994Z,1516700805.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:46:45.996Z,1516700805.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:46.374Z,1516700806.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:46.405Z,1516700806.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:46:46.406Z,1516700806.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:46.781Z,1516700806.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:46.797Z,1516700806.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:46:46.798Z,1516700806.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:47.180Z,1516700807.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:47.211Z,1516700807.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:46:47.215Z,1516700807.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:47.589Z,1516700807.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:47.605Z,1516700807.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:46:47.606Z,1516700807.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:47.984Z,1516700807.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:48.016Z,1516700808.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:46:48.017Z,1516700808.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:48.388Z,1516700808.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:48.409Z,1516700808.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:46:48.410Z,1516700808.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:48.764Z,1516700808.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:48.802Z,1516700808.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:46:48.803Z,1516700808.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:49.165Z,1516700809.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:49.201Z,1516700809.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:46:49.202Z,1516700809.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:49.567Z,1516700809.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:49.597Z,1516700809.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:46:49.598Z,1516700809.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:49.992Z,1516700809.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:50.008Z,1516700810.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:46:50.009Z,1516700810.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:50.380Z,1516700810.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:50.417Z,1516700810.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:46:50.418Z,1516700810.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:50.776Z,1516700810.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:50.801Z,1516700810.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:46:50.802Z,1516700810.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:51.168Z,1516700811.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:51.205Z,1516700811.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:46:51.206Z,1516700811.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:51.568Z,1516700811.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:51.604Z,1516700811.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:46:51.605Z,1516700811.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:51.996Z,1516700811.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:52.010Z,1516700812.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:46:52.011Z,1516700812.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:52.379Z,1516700812.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:52.405Z,1516700812.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:46:52.406Z,1516700812.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:52.776Z,1516700812.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:52.808Z,1516700812.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:46:52.809Z,1516700812.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:53.177Z,1516700813.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:53.203Z,1516700813.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:46:53.204Z,1516700813.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:53.568Z,1516700813.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:53.604Z,1516700813.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:46:53.605Z,1516700813.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:53.976Z,1516700813.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:54.001Z,1516700814.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:46:54.002Z,1516700814.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:54.380Z,1516700814.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:54.412Z,1516700814.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:46:54.413Z,1516700814.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:54.779Z,1516700814.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:54.812Z,1516700814.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:46:54.813Z,1516700814.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:55.173Z,1516700815.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:55.204Z,1516700815.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:46:55.205Z,1516700815.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:55.563Z,1516700815.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:55.581Z,1516700815.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:46:55.581Z,1516700815.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:55.977Z,1516700815.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:56.008Z,1516700816.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:46:56.009Z,1516700816.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:56.380Z,1516700816.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:56.412Z,1516700816.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:46:56.413Z,1516700816.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:56.795Z,1516700816.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:56.816Z,1516700816.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:46:56.817Z,1516700816.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:57.165Z,1516700817.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:57.180Z,1516700817.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:46:57.181Z,1516700817.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:57.574Z,1516700817.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:57.589Z,1516700817.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:46:57.590Z,1516700817.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:57.988Z,1516700817.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:58.012Z,1516700818.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:58.387Z,1516700818.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:58.410Z,1516700818.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:58.788Z,1516700818.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:58.812Z,1516700818.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:59.180Z,1516700819.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:59.211Z,1516700819.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:59.577Z,1516700819.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:46:59.592Z,1516700819.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:46:59.988Z,1516700819.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:00.023Z,1516700820.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:00.391Z,1516700820.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:00.422Z,1516700820.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:00.777Z,1516700820.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:00.792Z,1516700820.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:01.175Z,1516700821.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:01.190Z,1516700821.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:01.572Z,1516700821.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:01.591Z,1516700821.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:01.979Z,1516700821.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:01.994Z,1516700821.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:02.385Z,1516700822.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:02.405Z,1516700822.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:02.785Z,1516700822.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:02.805Z,1516700822.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:03.177Z,1516700823.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:03.191Z,1516700823.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:03.581Z,1516700823.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:03.601Z,1516700823.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:03.984Z,1516700823.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:04.005Z,1516700824.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:04.386Z,1516700824.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:04.401Z,1516700824.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:04.780Z,1516700824.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:04.804Z,1516700824.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:05.181Z,1516700825.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:05.197Z,1516700825.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:05.573Z,1516700825.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:05.591Z,1516700825.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:05.986Z,1516700825.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:06.002Z,1516700826.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:06.387Z,1516700826.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:06.402Z,1516700826.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:06.787Z,1516700826.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:06.801Z,1516700826.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:07.180Z,1516700827.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:07.196Z,1516700827.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:07.568Z,1516700827.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:07.597Z,1516700827.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:07.988Z,1516700827.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:08.002Z,1516700828.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:08.390Z,1516700828.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:08.405Z,1516700828.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:08.786Z,1516700828.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:08.809Z,1516700828.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:09.165Z,1516700829.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:09.196Z,1516700829.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:09.575Z,1516700829.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:09.594Z,1516700829.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:09.987Z,1516700829.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:10.002Z,1516700830.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:10.390Z,1516700830.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:10.404Z,1516700830.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:10.790Z,1516700830.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:10.813Z,1516700830.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:11.175Z,1516700831.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:11.195Z,1516700831.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:11.575Z,1516700831.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:11.601Z,1516700831.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:14.678Z,1516700834.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:14.694Z,1516700834.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:14.811Z,1516700834.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:14.842Z,1516700834.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:15.151Z,1516700835.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:15.196Z,1516700835.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:15.551Z,1516700835.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:15.566Z,1516700835.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:15.945Z,1516700835.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:15.960Z,1516700835.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:16.344Z,1516700836.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:16.373Z,1516700836.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:16.751Z,1516700836.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:16.766Z,1516700836.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:17.156Z,1516700837.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:17.171Z,1516700837.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:17.555Z,1516700837.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:17.571Z,1516700837.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:17.956Z,1516700837.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:17.975Z,1516700837.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:18.344Z,1516700838.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:18.365Z,1516700838.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:18.744Z,1516700838.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:18.766Z,1516700838.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:19.141Z,1516700839.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:19.174Z,1516700839.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:19.545Z,1516700839.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:19.568Z,1516700839.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:19.955Z,1516700839.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:19.971Z,1516700839.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:20.355Z,1516700840.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:20.383Z,1516700840.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:20.763Z,1516700840.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:20.782Z,1516700840.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:21.160Z,1516700841.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:21.180Z,1516700841.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:21.537Z,1516700841.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:21.565Z,1516700841.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:21.937Z,1516700841.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:21.969Z,1516700841.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:22.338Z,1516700842.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:22.376Z,1516700842.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:22.737Z,1516700842.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:22.775Z,1516700842.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:23.160Z,1516700843.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:23.180Z,1516700843.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:23.555Z,1516700843.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:23.589Z,1516700843.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:23.952Z,1516700843.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:23.982Z,1516700843.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:24.336Z,1516700844.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:24.384Z,1516700844.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:24.741Z,1516700844.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:24.757Z,1516700844.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:25.145Z,1516700845.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:25.160Z,1516700845.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:25.542Z,1516700845.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:25.561Z,1516700845.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:25.942Z,1516700845.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:25.961Z,1516700845.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:26.350Z,1516700846.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:26.365Z,1516700846.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:26.751Z,1516700846.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:26.766Z,1516700846.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:27.149Z,1516700847.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:27.169Z,1516700847.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:27.545Z,1516700847.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:27.560Z,1516700847.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:27.940Z,1516700847.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:27.962Z,1516700847.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:28.340Z,1516700848.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:28.362Z,1516700848.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:28.745Z,1516700848.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:28.760Z,1516700848.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:29.158Z,1516700849.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:29.173Z,1516700849.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:29.558Z,1516700849.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:29.577Z,1516700849.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:29.955Z,1516700849.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:29.970Z,1516700849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:30.336Z,1516700850.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:30.369Z,1516700850.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:30.735Z,1516700850.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:30.769Z,1516700850.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:31.136Z,1516700851.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:31.169Z,1516700851.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:31.549Z,1516700851.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:31.565Z,1516700851.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:31.936Z,1516700851.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:31.969Z,1516700851.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:32.360Z,1516700852.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:32.374Z,1516700852.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:32.759Z,1516700852.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:32.774Z,1516700852.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:33.155Z,1516700853.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:33.170Z,1516700853.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:33.536Z,1516700853.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:33.571Z,1516700853.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:33.936Z,1516700853.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:33.973Z,1516700853.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:34.341Z,1516700854.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:34.373Z,1516700854.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:34.736Z,1516700854.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:34.773Z,1516700854.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:35.159Z,1516700855.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:35.174Z,1516700855.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:35.559Z,1516700855.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:35.575Z,1516700855.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:35.947Z,1516700855.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:35.982Z,1516700855.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:36.340Z,1516700856.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:36.372Z,1516700856.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:36.736Z,1516700856.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:36.772Z,1516700856.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:37.135Z,1516700857.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:37.173Z,1516700857.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:37.538Z,1516700857.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:37.565Z,1516700857.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:37.936Z,1516700857.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:37.973Z,1516700857.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:38.347Z,1516700858.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:38.383Z,1516700858.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:38.755Z,1516700858.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:38.781Z,1516700858.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:39.147Z,1516700859.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:39.183Z,1516700859.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:39.544Z,1516700859.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:39.559Z,1516700859.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:39.942Z,1516700859.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:39.957Z,1516700859.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:40.342Z,1516700860.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:40.361Z,1516700860.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:40.741Z,1516700860.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:40.771Z,1516700860.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:41.152Z,1516700861.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:41.167Z,1516700861.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:41.551Z,1516700861.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:41.566Z,1516700861.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:41.950Z,1516700861.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:41.972Z,1516700861.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:42.345Z,1516700862.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:42.360Z,1516700862.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:42.744Z,1516700862.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:42.765Z,1516700862.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:43.142Z,1516700863.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:43.169Z,1516700863.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:43.544Z,1516700863.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:43.563Z,1516700863.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:43.940Z,1516700863.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:43.962Z,1516700863.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:44.355Z,1516700864.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:44.370Z,1516700864.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:44.753Z,1516700864.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:44.773Z,1516700864.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:45.154Z,1516700865.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:45.170Z,1516700865.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:45.545Z,1516700865.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:45.560Z,1516700865.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:45.948Z,1516700865.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:45.969Z,1516700865.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:46.344Z,1516700866.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:46.363Z,1516700866.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:46.745Z,1516700866.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:46.760Z,1516700866.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:47.155Z,1516700867.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:47.170Z,1516700867.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:47.553Z,1516700867.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:47.573Z,1516700867.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:47.955Z,1516700867.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:47.977Z,1516700867.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:48.351Z,1516700868.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:48.366Z,1516700868.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:48.748Z,1516700868.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:48.763Z,1516700868.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:49.145Z,1516700869.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:49.164Z,1516700869.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:49.550Z,1516700869.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:49.565Z,1516700869.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:49.944Z,1516700869.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:49.965Z,1516700869.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:50.354Z,1516700870.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:50.377Z,1516700870.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:50.755Z,1516700870.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:50.771Z,1516700870.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:51.154Z,1516700871.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:51.169Z,1516700871.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:51.546Z,1516700871.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:51.564Z,1516700871.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:51.948Z,1516700871.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:51.963Z,1516700871.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:52.339Z,1516700872.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:52.372Z,1516700872.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:52.745Z,1516700872.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:52.764Z,1516700872.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:53.159Z,1516700873.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:53.174Z,1516700873.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:53.558Z,1516700873.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:53.573Z,1516700873.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:53.956Z,1516700873.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:53.971Z,1516700873.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:54.343Z,1516700874.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:54.363Z,1516700874.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:54.757Z,1516700874.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:54.772Z,1516700874.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:55.147Z,1516700875.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:55.161Z,1516700875.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:55.545Z,1516700875.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:55.565Z,1516700875.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:55.940Z,1516700875.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:55.973Z,1516700875.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:56.361Z,1516700876.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:56.376Z,1516700876.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:56.760Z,1516700876.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:56.787Z,1516700876.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:57.165Z,1516700877.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:57.180Z,1516700877.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:57.537Z,1516700877.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:57.581Z,1516700877.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:57.941Z,1516700877.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:57.972Z,1516700877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:58.342Z,1516700878.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:58.357Z,1516700878.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:58.745Z,1516700878.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:58.759Z,1516700878.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:59.156Z,1516700879.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:59.188Z,1516700879.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:59.564Z,1516700879.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:59.597Z,1516700879.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:47:59.960Z,1516700879.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:47:59.985Z,1516700879.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:00.344Z,1516700880.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:00.361Z,1516700880.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:00.744Z,1516700880.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:00.765Z,1516700880.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:01.148Z,1516700881.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:01.162Z,1516700881.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:01.542Z,1516700881.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:01.561Z,1516700881.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:01.943Z,1516700881.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:01.966Z,1516700881.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:02.352Z,1516700882.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:02.367Z,1516700882.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:02.752Z,1516700882.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:02.782Z,1516700882.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:03.159Z,1516700883.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:03.174Z,1516700883.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:03.546Z,1516700883.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:03.562Z,1516700883.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:03.940Z,1516700883.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:03.963Z,1516700883.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:04.341Z,1516700884.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:04.364Z,1516700884.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:04.746Z,1516700884.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:04.769Z,1516700884.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:05.154Z,1516700885.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:05.170Z,1516700885.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:05.558Z,1516700885.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:05.577Z,1516700885.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:05.956Z,1516700885.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:05.970Z,1516700885.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:06.343Z,1516700886.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:06.363Z,1516700886.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:06.740Z,1516700886.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:06.763Z,1516700886.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:07.145Z,1516700887.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:07.164Z,1516700887.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:07.535Z,1516700887.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:07.569Z,1516700887.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:07.943Z,1516700887.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:07.958Z,1516700887.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:08.356Z,1516700888.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:08.370Z,1516700888.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:08.754Z,1516700888.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:08.770Z,1516700888.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:09.155Z,1516700889.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:09.170Z,1516700889.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:09.546Z,1516700889.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:09.565Z,1516700889.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:09.940Z,1516700889.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:09.963Z,1516700889.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:10.341Z,1516700890.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:10.364Z,1516700890.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:10.746Z,1516700890.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:10.768Z,1516700890.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:11.154Z,1516700891.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:11.170Z,1516700891.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:11.557Z,1516700891.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:11.577Z,1516700891.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:11.955Z,1516700891.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:11.970Z,1516700891.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:15.043Z,1516700895.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:15.059Z,1516700895.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:15.161Z,1516700895.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:15.208Z,1516700895.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:15.523Z,1516700895.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:15.554Z,1516700895.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:15.923Z,1516700895.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:15.950Z,1516700895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:16.323Z,1516700896.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:16.354Z,1516700896.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:16.706Z,1516700896.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:16.726Z,1516700896.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:17.109Z,1516700897.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:17.124Z,1516700897.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:17.508Z,1516700897.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:17.535Z,1516700897.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:17.900Z,1516700897.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:17.933Z,1516700897.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:18.320Z,1516700898.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:18.335Z,1516700898.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:18.722Z,1516700898.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:18.738Z,1516700898.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:19.116Z,1516700899.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:19.143Z,1516700899.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:19.501Z,1516700899.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:19.533Z,1516700899.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:19.905Z,1516700899.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:19.931Z,1516700899.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:20.301Z,1516700900.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:20.333Z,1516700900.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:20.704Z,1516700900.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:20.737Z,1516700900.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:21.124Z,1516700901.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:21.152Z,1516700901.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:21.523Z,1516700901.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:21.538Z,1516700901.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:21.911Z,1516700901.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:21.937Z,1516700901.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:22.306Z,1516700902.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:22.337Z,1516700902.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:22.700Z,1516700902.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:22.737Z,1516700902.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:23.111Z,1516700903.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:23.145Z,1516700903.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:23.524Z,1516700903.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:23.539Z,1516700903.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:23.911Z,1516700903.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:23.946Z,1516700903.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:24.301Z,1516700904.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:24.340Z,1516700904.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:24.705Z,1516700904.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:24.736Z,1516700904.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:25.111Z,1516700905.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:25.145Z,1516700905.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:25.524Z,1516700905.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:25.539Z,1516700905.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:25.912Z,1516700905.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:25.949Z,1516700905.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:26.301Z,1516700906.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:26.317Z,1516700906.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:26.700Z,1516700906.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:26.715Z,1516700906.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:27.130Z,1516700907.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:27.145Z,1516700907.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:27.533Z,1516700907.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:27.553Z,1516700907.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:27.911Z,1516700907.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:27.943Z,1516700907.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:28.310Z,1516700908.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:28.325Z,1516700908.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:28.706Z,1516700908.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:28.721Z,1516700908.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:29.119Z,1516700909.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:29.153Z,1516700909.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:29.523Z,1516700909.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:29.547Z,1516700909.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:29.923Z,1516700909.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:29.948Z,1516700909.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:30.310Z,1516700910.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:30.325Z,1516700910.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:30.706Z,1516700910.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:30.729Z,1516700910.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:31.116Z,1516700911.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:31.131Z,1516700911.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:31.516Z,1516700911.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:31.530Z,1516700911.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:31.924Z,1516700911.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:31.953Z,1516700911.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:32.304Z,1516700912.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:32.328Z,1516700912.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:32.715Z,1516700912.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:32.730Z,1516700912.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:33.116Z,1516700913.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:33.137Z,1516700913.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:33.516Z,1516700913.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:33.531Z,1516700913.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:33.915Z,1516700913.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:33.930Z,1516700913.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:34.306Z,1516700914.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:34.334Z,1516700914.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:34.716Z,1516700914.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:34.731Z,1516700914.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:35.121Z,1516700915.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:35.136Z,1516700915.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:35.517Z,1516700915.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:35.540Z,1516700915.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:35.920Z,1516700915.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:35.935Z,1516700915.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:36.310Z,1516700916.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:36.331Z,1516700916.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:36.705Z,1516700916.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:36.733Z,1516700916.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:37.121Z,1516700917.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:37.137Z,1516700917.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:37.524Z,1516700917.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:37.542Z,1516700917.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:37.919Z,1516700917.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:37.938Z,1516700917.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:38.301Z,1516700918.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:38.337Z,1516700918.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:38.699Z,1516700918.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:38.727Z,1516700918.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:39.118Z,1516700919.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:39.141Z,1516700919.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:39.523Z,1516700919.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:39.539Z,1516700919.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:39.914Z,1516700919.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:39.945Z,1516700919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:40.301Z,1516700920.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:40.328Z,1516700920.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:40.700Z,1516700920.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:40.733Z,1516700920.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:41.118Z,1516700921.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:41.138Z,1516700921.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:41.518Z,1516700921.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:41.533Z,1516700921.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:41.916Z,1516700921.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:41.937Z,1516700921.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:42.301Z,1516700922.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:42.328Z,1516700922.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:42.698Z,1516700922.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:42.726Z,1516700922.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:43.124Z,1516700923.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:43.138Z,1516700923.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:43.522Z,1516700923.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:43.546Z,1516700923.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:43.920Z,1516700923.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:43.935Z,1516700923.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:44.301Z,1516700924.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:44.329Z,1516700924.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:44.705Z,1516700924.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:44.742Z,1516700924.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:45.111Z,1516700925.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:45.149Z,1516700925.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:45.523Z,1516700925.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:45.539Z,1516700925.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:45.911Z,1516700925.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:45.945Z,1516700925.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:46.301Z,1516700926.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:46.329Z,1516700926.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:46.699Z,1516700926.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:46.741Z,1516700926.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:47.115Z,1516700927.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:47.143Z,1516700927.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:47.511Z,1516700927.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:47.538Z,1516700927.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:47.919Z,1516700927.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:47.945Z,1516700927.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:48.305Z,1516700928.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:48.320Z,1516700928.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:48.701Z,1516700928.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:48.716Z,1516700928.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:49.123Z,1516700929.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:49.148Z,1516700929.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:49.527Z,1516700929.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:49.551Z,1516700929.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:49.915Z,1516700929.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:49.930Z,1516700929.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:50.308Z,1516700930.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:50.323Z,1516700930.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:50.705Z,1516700930.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:50.731Z,1516700930.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:51.111Z,1516700931.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:51.127Z,1516700931.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:51.515Z,1516700931.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:51.530Z,1516700931.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:51.911Z,1516700931.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:51.932Z,1516700931.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:52.310Z,1516700932.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:52.326Z,1516700932.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:52.706Z,1516700932.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:52.729Z,1516700932.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:53.115Z,1516700933.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:53.130Z,1516700933.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:53.514Z,1516700933.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:53.533Z,1516700933.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:53.916Z,1516700933.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:53.931Z,1516700933.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:54.314Z,1516700934.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:54.328Z,1516700934.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:54.705Z,1516700934.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:54.728Z,1516700934.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:55.118Z,1516700935.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:55.141Z,1516700935.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:55.518Z,1516700935.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:55.533Z,1516700935.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:55.915Z,1516700935.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:55.943Z,1516700935.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:56.313Z,1516700936.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:56.328Z,1516700936.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:56.710Z,1516700936.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:56.733Z,1516700936.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:57.116Z,1516700937.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:57.143Z,1516700937.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:57.527Z,1516700937.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:57.542Z,1516700937.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:57.914Z,1516700937.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:57.946Z,1516700937.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:58.301Z,1516700938.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:58.327Z,1516700938.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:58.701Z,1516700938.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:58.733Z,1516700938.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:59.100Z,1516700939.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:59.135Z,1516700939.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:59.523Z,1516700939.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:59.538Z,1516700939.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:48:59.920Z,1516700939.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:48:59.947Z,1516700939.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:00.323Z,1516700940.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:00.337Z,1516700940.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:00.698Z,1516700940.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:00.721Z,1516700940.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:01.100Z,1516700941.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:01.136Z,1516700941.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:01.501Z,1516700941.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:01.537Z,1516700941.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:01.904Z,1516700941.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:01.937Z,1516700941.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:02.311Z,1516700942.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:02.338Z,1516700942.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:02.724Z,1516700942.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:02.739Z,1516700942.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:03.111Z,1516700943.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:03.145Z,1516700943.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:03.500Z,1516700943.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:03.536Z,1516700943.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:03.900Z,1516700943.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:03.939Z,1516700943.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:04.302Z,1516700944.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:04.318Z,1516700944.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:04.701Z,1516700944.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:04.717Z,1516700944.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:05.108Z,1516700945.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:05.123Z,1516700945.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:05.510Z,1516700945.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:05.525Z,1516700945.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:05.923Z,1516700945.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:05.948Z,1516700945.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:06.323Z,1516700946.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:06.348Z,1516700946.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:06.702Z,1516700946.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:06.716Z,1516700946.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:07.112Z,1516700947.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:07.149Z,1516700947.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:07.511Z,1516700947.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:07.525Z,1516700947.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:07.907Z,1516700947.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:07.922Z,1516700947.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:08.323Z,1516700948.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:08.354Z,1516700948.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:08.723Z,1516700948.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:08.737Z,1516700948.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:09.112Z,1516700949.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:09.127Z,1516700949.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:09.507Z,1516700949.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:09.530Z,1516700949.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:09.910Z,1516700949.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:09.928Z,1516700949.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:10.314Z,1516700950.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:10.337Z,1516700950.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:10.708Z,1516700950.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:10.735Z,1516700950.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:11.101Z,1516700951.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:11.129Z,1516700951.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:11.132Z,1516700951.132 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:49:11.132Z,1516700951.132 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:49:11.132Z,1516700951.132 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:49:11.132Z,1516700951.132 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:49:11.516Z,1516700951.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:11.545Z,1516700951.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:11.552Z,1516700951.552 [Default:CheckIn:D] Stopped 2018-01-23T09:49:11.552Z,1516700951.552 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:49:11.931Z,1516700951.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:11.949Z,1516700951.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:11.952Z,1516700951.952 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 391.324870 min 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn:E] Stopped 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn] Stopped 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn](INFO): Running loop #39 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn] Running Loop=39 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:49:11.953Z,1516700951.953 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:49:12.312Z,1516700952.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:12.347Z,1516700952.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:15.400Z,1516700955.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:15.436Z,1516700955.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:15.517Z,1516700955.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:15.561Z,1516700955.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:15.911Z,1516700955.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:15.938Z,1516700955.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:16.326Z,1516700956.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:16.342Z,1516700956.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:16.715Z,1516700956.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:16.740Z,1516700956.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:17.104Z,1516700957.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:17.144Z,1516700957.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:17.501Z,1516700957.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:17.516Z,1516700957.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:17.904Z,1516700957.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:17.941Z,1516700957.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:18.306Z,1516700958.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:18.321Z,1516700958.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:18.703Z,1516700958.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:18.718Z,1516700958.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:19.103Z,1516700959.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:19.118Z,1516700959.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:19.500Z,1516700959.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:19.517Z,1516700959.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:19.900Z,1516700959.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:19.915Z,1516700959.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:20.299Z,1516700960.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:20.314Z,1516700960.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:20.701Z,1516700960.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:20.715Z,1516700960.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:21.096Z,1516700961.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:21.123Z,1516700961.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:21.507Z,1516700961.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:21.523Z,1516700961.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:21.906Z,1516700961.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:21.920Z,1516700961.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:22.306Z,1516700962.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:22.325Z,1516700962.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:22.700Z,1516700962.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:22.715Z,1516700962.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:23.101Z,1516700963.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:23.116Z,1516700963.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:23.497Z,1516700963.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:23.524Z,1516700963.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:23.900Z,1516700963.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:23.915Z,1516700963.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:24.310Z,1516700964.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:24.332Z,1516700964.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:24.708Z,1516700964.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:24.731Z,1516700964.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:25.111Z,1516700965.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:25.125Z,1516700965.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:25.499Z,1516700965.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:25.520Z,1516700965.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:25.896Z,1516700965.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:25.919Z,1516700965.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:26.299Z,1516700966.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:26.319Z,1516700966.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:26.702Z,1516700966.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:26.720Z,1516700966.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:27.090Z,1516700967.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:27.117Z,1516700967.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:27.510Z,1516700967.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:27.525Z,1516700967.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:27.914Z,1516700967.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:27.929Z,1516700967.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:28.310Z,1516700968.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:28.325Z,1516700968.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:28.696Z,1516700968.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:28.714Z,1516700968.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:29.092Z,1516700969.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:29.119Z,1516700969.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:29.493Z,1516700969.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:29.524Z,1516700969.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:29.904Z,1516700969.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:29.922Z,1516700969.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:30.312Z,1516700970.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:30.326Z,1516700970.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:30.710Z,1516700970.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:30.726Z,1516700970.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:31.110Z,1516700971.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:31.125Z,1516700971.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:31.492Z,1516700971.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:31.519Z,1516700971.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:31.904Z,1516700971.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:31.922Z,1516700971.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:32.292Z,1516700972.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:32.325Z,1516700972.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:32.706Z,1516700972.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:32.721Z,1516700972.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:33.090Z,1516700973.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:33.121Z,1516700973.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:33.515Z,1516700973.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:33.530Z,1516700973.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:33.915Z,1516700973.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:33.936Z,1516700973.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:34.308Z,1516700974.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:34.329Z,1516700974.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:34.692Z,1516700974.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:34.725Z,1516700974.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:35.093Z,1516700975.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:35.128Z,1516700975.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:35.493Z,1516700975.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:35.520Z,1516700975.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:35.892Z,1516700975.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:35.925Z,1516700975.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:36.309Z,1516700976.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:36.329Z,1516700976.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:36.710Z,1516700976.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:36.733Z,1516700976.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:37.108Z,1516700977.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:37.129Z,1516700977.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:37.493Z,1516700977.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:37.519Z,1516700977.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:37.892Z,1516700977.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:37.919Z,1516700977.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:38.292Z,1516700978.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:38.325Z,1516700978.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:38.693Z,1516700978.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:38.729Z,1516700978.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:38.729Z,1516700978.729 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131 2018-01-23T09:49:38.729Z,1516700978.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:49:38.735Z,1516700978.735 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:38.735Z,1516700978.735 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 131 2018-01-23T09:49:38.735Z,1516700978.735 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:49:38.737Z,1516700978.737 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:38.737Z,1516700978.737 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131 2018-01-23T09:49:38.737Z,1516700978.737 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:49:38.772Z,1516700978.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:49:38.772Z,1516700978.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:49:38.772Z,1516700978.772 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:49:39.092Z,1516700979.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:39.139Z,1516700979.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:49:39.139Z,1516700979.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131 2018-01-23T09:49:39.139Z,1516700979.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:49:39.139Z,1516700979.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 131 2018-01-23T09:49:39.140Z,1516700979.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:49:39.140Z,1516700979.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131 2018-01-23T09:49:39.511Z,1516700979.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:39.525Z,1516700979.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:49:39.526Z,1516700979.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:49:39.526Z,1516700979.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:49:39.526Z,1516700979.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:49:39.527Z,1516700979.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:49:39.527Z,1516700979.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:49:39.528Z,1516700979.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:49:39.528Z,1516700979.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:49:39.528Z,1516700979.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:49:39.917Z,1516700979.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:39.944Z,1516700979.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:49:39.945Z,1516700979.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:40.311Z,1516700980.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:40.337Z,1516700980.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:49:40.338Z,1516700980.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:40.704Z,1516700980.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:40.736Z,1516700980.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:49:40.737Z,1516700980.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:41.105Z,1516700981.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:41.137Z,1516700981.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:49:41.138Z,1516700981.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:41.497Z,1516700981.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:41.512Z,1516700981.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:49:41.513Z,1516700981.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:41.899Z,1516700981.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:41.936Z,1516700981.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:49:41.937Z,1516700981.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:42.315Z,1516700982.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:42.341Z,1516700982.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:49:42.342Z,1516700982.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:42.719Z,1516700982.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:42.748Z,1516700982.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:49:42.749Z,1516700982.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:43.111Z,1516700983.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:43.142Z,1516700983.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:49:43.147Z,1516700983.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:43.500Z,1516700983.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:43.523Z,1516700983.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:49:43.524Z,1516700983.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:43.901Z,1516700983.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:43.916Z,1516700983.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:49:43.917Z,1516700983.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:44.301Z,1516700984.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:44.315Z,1516700984.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:49:44.316Z,1516700984.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:44.700Z,1516700984.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:44.720Z,1516700984.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:49:44.721Z,1516700984.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:45.097Z,1516700985.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:45.118Z,1516700985.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:49:45.119Z,1516700985.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:45.519Z,1516700985.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:45.534Z,1516700985.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:49:45.555Z,1516700985.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:45.911Z,1516700985.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:45.926Z,1516700985.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:49:45.927Z,1516700985.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:46.310Z,1516700986.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:46.325Z,1516700986.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:49:46.326Z,1516700986.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:46.700Z,1516700986.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:46.720Z,1516700986.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:49:46.721Z,1516700986.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:47.097Z,1516700987.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:47.128Z,1516700987.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:49:47.129Z,1516700987.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:47.506Z,1516700987.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:47.521Z,1516700987.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:49:47.522Z,1516700987.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:47.895Z,1516700987.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:47.932Z,1516700987.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:49:47.933Z,1516700987.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:48.313Z,1516700988.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:48.328Z,1516700988.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:49:48.329Z,1516700988.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:48.708Z,1516700988.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:48.730Z,1516700988.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:49:48.731Z,1516700988.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:49.118Z,1516700989.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:49.132Z,1516700989.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:49:49.133Z,1516700989.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:49.494Z,1516700989.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:49.521Z,1516700989.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:49:49.522Z,1516700989.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:49.897Z,1516700989.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:49.932Z,1516700989.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:49:49.933Z,1516700989.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:50.301Z,1516700990.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:50.335Z,1516700990.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:49:50.336Z,1516700990.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:50.698Z,1516700990.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:50.725Z,1516700990.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:49:50.726Z,1516700990.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:51.094Z,1516700991.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:51.108Z,1516700991.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:49:51.109Z,1516700991.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:51.529Z,1516700991.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:51.552Z,1516700991.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:49:51.553Z,1516700991.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:51.912Z,1516700991.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:51.947Z,1516700991.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:49:51.948Z,1516700991.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:52.313Z,1516700992.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:52.344Z,1516700992.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:49:52.345Z,1516700992.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:52.697Z,1516700992.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:52.717Z,1516700992.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:49:52.718Z,1516700992.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:53.101Z,1516700993.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:53.117Z,1516700993.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:49:53.118Z,1516700993.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:53.498Z,1516700993.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:53.528Z,1516700993.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:49:53.529Z,1516700993.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:53.900Z,1516700993.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:53.916Z,1516700993.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:49:53.917Z,1516700993.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:54.310Z,1516700994.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:54.326Z,1516700994.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:49:54.328Z,1516700994.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:54.710Z,1516700994.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:54.725Z,1516700994.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:49:54.726Z,1516700994.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:55.110Z,1516700995.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:55.126Z,1516700995.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:49:55.127Z,1516700995.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:55.501Z,1516700995.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:55.515Z,1516700995.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:49:55.516Z,1516700995.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:55.900Z,1516700995.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:55.915Z,1516700995.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:49:55.916Z,1516700995.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:56.296Z,1516700996.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:56.314Z,1516700996.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:49:56.319Z,1516700996.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:56.702Z,1516700996.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:56.716Z,1516700996.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:49:56.717Z,1516700996.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:57.096Z,1516700997.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:57.118Z,1516700997.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:49:57.119Z,1516700997.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:57.510Z,1516700997.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:57.525Z,1516700997.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:49:57.526Z,1516700997.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:57.914Z,1516700997.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:57.936Z,1516700997.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:49:57.937Z,1516700997.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:58.315Z,1516700998.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:58.329Z,1516700998.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:49:58.330Z,1516700998.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:58.692Z,1516700998.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:58.724Z,1516700998.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:49:58.725Z,1516700998.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:59.092Z,1516700999.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:59.140Z,1516700999.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:59.493Z,1516700999.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:59.520Z,1516700999.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:49:59.892Z,1516700999.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:49:59.925Z,1516700999.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:00.312Z,1516701000.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:00.326Z,1516701000.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:00.715Z,1516701000.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:00.730Z,1516701000.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:01.111Z,1516701001.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:01.126Z,1516701001.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:01.492Z,1516701001.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:01.527Z,1516701001.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:01.893Z,1516701001.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:01.929Z,1516701001.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:02.297Z,1516701002.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:02.323Z,1516701002.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:02.693Z,1516701002.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:02.725Z,1516701002.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:03.092Z,1516701003.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:03.125Z,1516701003.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:03.507Z,1516701003.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:03.529Z,1516701003.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:03.916Z,1516701003.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:03.930Z,1516701003.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:04.311Z,1516701004.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:04.326Z,1516701004.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:04.692Z,1516701004.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:04.728Z,1516701004.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:05.092Z,1516701005.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:05.125Z,1516701005.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:05.493Z,1516701005.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:05.525Z,1516701005.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:05.892Z,1516701005.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:05.928Z,1516701005.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:06.303Z,1516701006.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:06.337Z,1516701006.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:06.718Z,1516701006.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:06.733Z,1516701006.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:07.103Z,1516701007.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:07.137Z,1516701007.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:07.496Z,1516701007.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:07.529Z,1516701007.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:07.896Z,1516701007.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:07.928Z,1516701007.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:08.292Z,1516701008.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:08.328Z,1516701008.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:08.693Z,1516701008.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:08.729Z,1516701008.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:09.092Z,1516701009.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:09.128Z,1516701009.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:09.503Z,1516701009.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:09.537Z,1516701009.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:09.917Z,1516701009.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:09.931Z,1516701009.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:10.303Z,1516701010.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:10.329Z,1516701010.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:10.692Z,1516701010.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:10.729Z,1516701010.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:11.092Z,1516701011.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:11.129Z,1516701011.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:11.501Z,1516701011.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:11.527Z,1516701011.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:11.892Z,1516701011.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:11.928Z,1516701011.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:12.303Z,1516701012.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:12.336Z,1516701012.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:12.719Z,1516701012.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:12.734Z,1516701012.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:15.817Z,1516701015.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:15.831Z,1516701015.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:15.928Z,1516701015.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:15.949Z,1516701015.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:16.287Z,1516701016.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:16.302Z,1516701016.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:16.689Z,1516701016.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:16.704Z,1516701016.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:17.081Z,1516701017.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:17.101Z,1516701017.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:17.491Z,1516701017.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:17.506Z,1516701017.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:17.899Z,1516701017.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:17.932Z,1516701017.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:18.299Z,1516701018.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:18.330Z,1516701018.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:18.692Z,1516701018.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:18.729Z,1516701018.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:19.085Z,1516701019.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:19.100Z,1516701019.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:19.488Z,1516701019.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:19.509Z,1516701019.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:19.887Z,1516701019.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:19.902Z,1516701019.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:20.291Z,1516701020.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:20.306Z,1516701020.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:20.690Z,1516701020.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:20.705Z,1516701020.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:21.092Z,1516701021.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:21.113Z,1516701021.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:21.493Z,1516701021.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:21.508Z,1516701021.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:21.882Z,1516701021.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:21.906Z,1516701021.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:22.295Z,1516701022.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:22.311Z,1516701022.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:22.697Z,1516701022.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:22.717Z,1516701022.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:23.092Z,1516701023.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:23.112Z,1516701023.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:23.500Z,1516701023.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:23.521Z,1516701023.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:23.893Z,1516701023.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:23.908Z,1516701023.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:24.304Z,1516701024.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:24.341Z,1516701024.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:24.701Z,1516701024.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:24.721Z,1516701024.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:25.101Z,1516701025.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:25.115Z,1516701025.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:25.496Z,1516701025.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:25.512Z,1516701025.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:25.876Z,1516701025.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:25.913Z,1516701025.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:26.303Z,1516701026.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:26.318Z,1516701026.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:26.702Z,1516701026.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:26.717Z,1516701026.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:27.104Z,1516701027.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:27.119Z,1516701027.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:27.479Z,1516701027.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:27.511Z,1516701027.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:27.880Z,1516701027.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:27.917Z,1516701027.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:28.298Z,1516701028.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:28.321Z,1516701028.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:28.702Z,1516701028.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:28.717Z,1516701028.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:29.094Z,1516701029.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:29.122Z,1516701029.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:29.478Z,1516701029.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:29.521Z,1516701029.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:29.883Z,1516701029.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:29.920Z,1516701029.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:30.306Z,1516701030.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:30.322Z,1516701030.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:30.692Z,1516701030.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:30.734Z,1516701030.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:31.093Z,1516701031.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:31.122Z,1516701031.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:31.483Z,1516701031.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:31.524Z,1516701031.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:31.879Z,1516701031.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:31.894Z,1516701031.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:32.287Z,1516701032.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:32.324Z,1516701032.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:32.689Z,1516701032.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:32.698Z,1516701032.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x26728 got:0x57813 2018-01-23T09:50:32.721Z,1516701032.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:33.099Z,1516701033.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:33.125Z,1516701033.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:33.485Z,1516701033.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:33.525Z,1516701033.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:33.884Z,1516701033.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:33.929Z,1516701033.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:34.301Z,1516701034.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:34.325Z,1516701034.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:34.696Z,1516701034.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:34.724Z,1516701034.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:35.088Z,1516701035.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:35.123Z,1516701035.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:35.489Z,1516701035.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:35.525Z,1516701035.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:35.889Z,1516701035.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:35.899Z,1516701035.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T09:50:35.928Z,1516701035.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:36.297Z,1516701036.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:36.321Z,1516701036.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:36.710Z,1516701036.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:36.732Z,1516701036.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:37.095Z,1516701037.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:37.125Z,1516701037.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:37.482Z,1516701037.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:37.521Z,1516701037.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:37.890Z,1516701037.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:37.898Z,1516701037.898 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T09:50:37.926Z,1516701037.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:38.311Z,1516701038.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:38.326Z,1516701038.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:38.691Z,1516701038.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:38.725Z,1516701038.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:39.102Z,1516701039.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:39.133Z,1516701039.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:39.486Z,1516701039.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:39.527Z,1516701039.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:39.886Z,1516701039.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:39.901Z,1516701039.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:40.295Z,1516701040.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:40.329Z,1516701040.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:40.705Z,1516701040.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:40.730Z,1516701040.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:41.094Z,1516701041.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:41.125Z,1516701041.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:41.484Z,1516701041.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:41.508Z,1516701041.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:41.885Z,1516701041.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:41.911Z,1516701041.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:42.289Z,1516701042.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:42.339Z,1516701042.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:42.708Z,1516701042.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:42.741Z,1516701042.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:43.096Z,1516701043.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:43.111Z,1516701043.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:43.490Z,1516701043.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:43.540Z,1516701043.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:43.890Z,1516701043.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:43.940Z,1516701043.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:44.295Z,1516701044.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:44.349Z,1516701044.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:44.706Z,1516701044.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:44.752Z,1516701044.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:45.130Z,1516701045.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:45.160Z,1516701045.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:45.490Z,1516701045.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:45.537Z,1516701045.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:45.883Z,1516701045.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:45.907Z,1516701045.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:46.314Z,1516701046.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:46.342Z,1516701046.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:46.729Z,1516701046.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:46.797Z,1516701046.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:47.098Z,1516701047.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:47.149Z,1516701047.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:47.506Z,1516701047.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:47.514Z,1516701047.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T09:50:47.557Z,1516701047.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:47.897Z,1516701047.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:47.925Z,1516701047.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:48.298Z,1516701048.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:48.357Z,1516701048.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:48.715Z,1516701048.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:48.776Z,1516701048.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:49.113Z,1516701049.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:49.139Z,1516701049.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:49.484Z,1516701049.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:49.539Z,1516701049.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:49.897Z,1516701049.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:49.945Z,1516701049.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:50.301Z,1516701050.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:50.352Z,1516701050.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:50.700Z,1516701050.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:50.749Z,1516701050.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:51.103Z,1516701051.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:51.122Z,1516701051.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:51.496Z,1516701051.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:51.548Z,1516701051.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:51.879Z,1516701051.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:51.923Z,1516701051.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:52.307Z,1516701052.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:52.333Z,1516701052.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:52.709Z,1516701052.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:52.767Z,1516701052.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:53.093Z,1516701053.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:53.145Z,1516701053.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:53.487Z,1516701053.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:53.532Z,1516701053.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:53.894Z,1516701053.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:53.944Z,1516701053.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:54.290Z,1516701054.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:54.371Z,1516701054.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:54.720Z,1516701054.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:54.743Z,1516701054.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:55.091Z,1516701055.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:55.106Z,1516701055.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:55.481Z,1516701055.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:55.504Z,1516701055.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:55.889Z,1516701055.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:55.909Z,1516701055.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:56.284Z,1516701056.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:56.303Z,1516701056.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:56.660Z,1516701056.660 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T09:50:56.660Z,1516701056.660 [NAL9602] Data Fault, FailCount= 1 2018-01-23T09:50:56.660Z,1516701056.660 [NAL9602](ERROR): Data Fault 2018-01-23T09:50:56.684Z,1516701056.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:56.715Z,1516701056.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:56.738Z,1516701056.738 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T09:50:57.060Z,1516701057.060 [NAL9602](INFO): Powering down 2018-01-23T09:50:57.081Z,1516701057.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:57.113Z,1516701057.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:57.477Z,1516701057.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:57.505Z,1516701057.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:57.876Z,1516701057.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:57.911Z,1516701057.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:57.924Z,1516701057.924 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T09:50:57.924Z,1516701057.924 [NAL9602] No Fault, FailCount= 1 2018-01-23T09:50:58.276Z,1516701058.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:58.309Z,1516701058.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:58.688Z,1516701058.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:58.706Z,1516701058.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:59.076Z,1516701059.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:59.102Z,1516701059.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:59.476Z,1516701059.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:59.510Z,1516701059.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:50:59.876Z,1516701059.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:50:59.913Z,1516701059.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:00.276Z,1516701060.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:00.309Z,1516701060.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:00.676Z,1516701060.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:00.702Z,1516701060.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:01.076Z,1516701061.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:01.103Z,1516701061.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:01.476Z,1516701061.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:01.513Z,1516701061.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:01.880Z,1516701061.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:01.906Z,1516701061.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:02.277Z,1516701062.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:02.308Z,1516701062.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:02.677Z,1516701062.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:02.708Z,1516701062.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:03.076Z,1516701063.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:03.091Z,1516701063.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:03.478Z,1516701063.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:03.493Z,1516701063.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:03.883Z,1516701063.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:03.898Z,1516701063.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:04.285Z,1516701064.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:04.300Z,1516701064.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:04.683Z,1516701064.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:04.706Z,1516701064.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:05.086Z,1516701065.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:05.102Z,1516701065.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:05.484Z,1516701065.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:05.510Z,1516701065.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:05.884Z,1516701065.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:05.901Z,1516701065.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:06.285Z,1516701066.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:06.301Z,1516701066.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:06.686Z,1516701066.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:06.701Z,1516701066.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:07.080Z,1516701067.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:07.108Z,1516701067.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:07.488Z,1516701067.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:07.503Z,1516701067.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:07.885Z,1516701067.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:07.904Z,1516701067.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:08.284Z,1516701068.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:08.300Z,1516701068.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:08.685Z,1516701068.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:08.701Z,1516701068.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:09.084Z,1516701069.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:09.101Z,1516701069.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:09.484Z,1516701069.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:09.505Z,1516701069.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:09.884Z,1516701069.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:09.899Z,1516701069.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:10.284Z,1516701070.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:10.304Z,1516701070.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:10.680Z,1516701070.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:10.695Z,1516701070.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:11.084Z,1516701071.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:11.099Z,1516701071.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:11.489Z,1516701071.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:11.503Z,1516701071.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:11.884Z,1516701071.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:11.898Z,1516701071.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:12.284Z,1516701072.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:12.340Z,1516701072.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:12.684Z,1516701072.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:12.698Z,1516701072.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:13.085Z,1516701073.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:13.099Z,1516701073.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:16.347Z,1516701076.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:16.363Z,1516701076.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:16.473Z,1516701076.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:16.517Z,1516701076.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:16.865Z,1516701076.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:16.891Z,1516701076.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:17.256Z,1516701077.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:17.271Z,1516701077.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:17.650Z,1516701077.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:17.665Z,1516701077.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:18.044Z,1516701078.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:18.072Z,1516701078.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:18.450Z,1516701078.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:18.465Z,1516701078.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:18.848Z,1516701078.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:18.876Z,1516701078.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:19.250Z,1516701079.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:19.265Z,1516701079.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:19.647Z,1516701079.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:19.671Z,1516701079.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:20.054Z,1516701080.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:20.070Z,1516701080.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:20.453Z,1516701080.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:20.476Z,1516701080.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:20.848Z,1516701080.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:20.865Z,1516701080.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:21.257Z,1516701081.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:21.273Z,1516701081.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:21.638Z,1516701081.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:21.666Z,1516701081.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:22.049Z,1516701082.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:22.064Z,1516701082.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:22.444Z,1516701082.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:22.498Z,1516701082.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:22.837Z,1516701082.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:22.873Z,1516701082.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:23.240Z,1516701083.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:23.273Z,1516701083.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:23.644Z,1516701083.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:23.672Z,1516701083.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:24.037Z,1516701084.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:24.061Z,1516701084.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:24.439Z,1516701084.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:24.454Z,1516701084.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:24.840Z,1516701084.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:24.881Z,1516701084.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:25.244Z,1516701085.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:25.279Z,1516701085.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:25.640Z,1516701085.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:25.656Z,1516701085.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:26.048Z,1516701086.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:26.062Z,1516701086.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:26.448Z,1516701086.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:26.462Z,1516701086.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:26.844Z,1516701086.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:26.860Z,1516701086.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:27.228Z,1516701087.228 [NAL9602](INFO): Powering up NAL9602 2018-01-23T09:51:27.246Z,1516701087.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:27.279Z,1516701087.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:27.644Z,1516701087.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:27.659Z,1516701087.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:28.047Z,1516701088.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:28.062Z,1516701088.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:28.444Z,1516701088.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:28.472Z,1516701088.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:28.844Z,1516701088.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:28.870Z,1516701088.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:29.249Z,1516701089.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:29.264Z,1516701089.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:29.649Z,1516701089.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:29.664Z,1516701089.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:30.045Z,1516701090.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:30.059Z,1516701090.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:30.444Z,1516701090.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:30.472Z,1516701090.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:30.849Z,1516701090.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:30.863Z,1516701090.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:31.249Z,1516701091.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:31.263Z,1516701091.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:31.649Z,1516701091.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:31.664Z,1516701091.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:32.047Z,1516701092.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:32.068Z,1516701092.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:32.447Z,1516701092.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:32.461Z,1516701092.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:32.847Z,1516701092.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:32.862Z,1516701092.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:33.247Z,1516701093.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:33.261Z,1516701093.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:33.645Z,1516701093.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:33.660Z,1516701093.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:34.047Z,1516701094.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:34.062Z,1516701094.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:34.447Z,1516701094.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:34.461Z,1516701094.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:34.845Z,1516701094.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:34.860Z,1516701094.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:35.247Z,1516701095.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:35.262Z,1516701095.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:35.647Z,1516701095.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:35.662Z,1516701095.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:36.045Z,1516701096.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:36.060Z,1516701096.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:36.449Z,1516701096.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:36.464Z,1516701096.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:36.847Z,1516701096.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:36.861Z,1516701096.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:37.247Z,1516701097.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:37.261Z,1516701097.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:37.647Z,1516701097.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:37.662Z,1516701097.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:38.051Z,1516701098.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:38.066Z,1516701098.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:38.425Z,1516701098.425 [NAL9602](INFO): NAL9602 initialized 2018-01-23T09:51:38.454Z,1516701098.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:38.469Z,1516701098.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:38.847Z,1516701098.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:38.862Z,1516701098.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:39.251Z,1516701099.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:39.266Z,1516701099.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:39.651Z,1516701099.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:39.666Z,1516701099.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:40.051Z,1516701100.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:40.073Z,1516701100.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:40.449Z,1516701100.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:40.464Z,1516701100.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:40.846Z,1516701100.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:40.873Z,1516701100.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:41.249Z,1516701101.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:41.264Z,1516701101.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:41.649Z,1516701101.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:41.668Z,1516701101.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:42.054Z,1516701102.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:42.073Z,1516701102.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:42.459Z,1516701102.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:42.474Z,1516701102.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:42.854Z,1516701102.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:42.876Z,1516701102.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:43.252Z,1516701103.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:43.267Z,1516701103.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:43.654Z,1516701103.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:43.673Z,1516701103.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:44.049Z,1516701104.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:44.064Z,1516701104.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:44.448Z,1516701104.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:44.467Z,1516701104.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:44.848Z,1516701104.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:44.863Z,1516701104.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:45.254Z,1516701105.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:45.269Z,1516701105.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:45.656Z,1516701105.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:45.677Z,1516701105.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:46.067Z,1516701106.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:46.104Z,1516701106.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:46.445Z,1516701106.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:46.472Z,1516701106.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:46.844Z,1516701106.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:46.881Z,1516701106.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:47.245Z,1516701107.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:47.272Z,1516701107.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:47.657Z,1516701107.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:47.672Z,1516701107.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:48.058Z,1516701108.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:48.074Z,1516701108.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:48.457Z,1516701108.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:48.477Z,1516701108.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:48.859Z,1516701108.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:48.881Z,1516701108.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:49.254Z,1516701109.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:49.269Z,1516701109.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:49.644Z,1516701109.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:49.671Z,1516701109.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:50.053Z,1516701110.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:50.068Z,1516701110.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:50.453Z,1516701110.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:50.468Z,1516701110.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:50.860Z,1516701110.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:50.875Z,1516701110.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:51.259Z,1516701111.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:51.274Z,1516701111.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:51.661Z,1516701111.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:51.685Z,1516701111.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:52.060Z,1516701112.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:52.075Z,1516701112.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:52.457Z,1516701112.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:52.472Z,1516701112.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:52.848Z,1516701112.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:52.870Z,1516701112.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:53.241Z,1516701113.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:53.278Z,1516701113.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:53.642Z,1516701113.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:53.673Z,1516701113.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:54.063Z,1516701114.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:54.078Z,1516701114.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:54.466Z,1516701114.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:54.481Z,1516701114.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:54.861Z,1516701114.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:54.876Z,1516701114.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:55.241Z,1516701115.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:55.277Z,1516701115.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:55.655Z,1516701115.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:55.670Z,1516701115.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:56.059Z,1516701116.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:56.074Z,1516701116.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:56.442Z,1516701116.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:56.482Z,1516701116.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:56.854Z,1516701116.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:56.869Z,1516701116.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:57.268Z,1516701117.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:57.285Z,1516701117.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:57.666Z,1516701117.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:57.690Z,1516701117.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:58.071Z,1516701118.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:58.086Z,1516701118.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:58.441Z,1516701118.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:58.470Z,1516701118.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:58.843Z,1516701118.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:58.881Z,1516701118.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:59.259Z,1516701119.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:59.275Z,1516701119.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:51:59.645Z,1516701119.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:51:59.681Z,1516701119.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:00.066Z,1516701120.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:00.082Z,1516701120.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:00.463Z,1516701120.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:00.484Z,1516701120.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:00.867Z,1516701120.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:00.885Z,1516701120.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:01.258Z,1516701121.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:01.274Z,1516701121.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:01.641Z,1516701121.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:01.673Z,1516701121.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:02.047Z,1516701122.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:02.078Z,1516701122.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:02.444Z,1516701122.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:02.479Z,1516701122.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:02.848Z,1516701122.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:02.876Z,1516701122.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:03.269Z,1516701123.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:03.285Z,1516701123.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:03.669Z,1516701123.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:03.686Z,1516701123.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:04.064Z,1516701124.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:04.080Z,1516701124.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:04.453Z,1516701124.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:04.480Z,1516701124.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:04.840Z,1516701124.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:04.877Z,1516701124.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:05.243Z,1516701125.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:05.271Z,1516701125.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:05.643Z,1516701125.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:05.658Z,1516701125.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:06.055Z,1516701126.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:06.082Z,1516701126.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:06.459Z,1516701126.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:06.493Z,1516701126.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:06.853Z,1516701126.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:06.885Z,1516701126.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:07.251Z,1516701127.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:07.266Z,1516701127.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:07.642Z,1516701127.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:07.670Z,1516701127.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:08.048Z,1516701128.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:08.075Z,1516701128.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:08.442Z,1516701128.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:08.471Z,1516701128.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:08.842Z,1516701128.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:08.869Z,1516701128.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:09.268Z,1516701129.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:09.284Z,1516701129.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:09.667Z,1516701129.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:09.682Z,1516701129.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:10.053Z,1516701130.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:10.085Z,1516701130.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:10.443Z,1516701130.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:10.470Z,1516701130.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:10.843Z,1516701130.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:10.880Z,1516701130.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:11.245Z,1516701131.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:11.272Z,1516701131.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:11.645Z,1516701131.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:11.692Z,1516701131.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:12.053Z,1516701132.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:12.060Z,1516701132.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x6223 got:0x16384 2018-01-23T09:52:12.087Z,1516701132.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:12.455Z,1516701132.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:12.482Z,1516701132.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:12.872Z,1516701132.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:12.887Z,1516701132.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:13.250Z,1516701133.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:13.284Z,1516701133.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:16.347Z,1516701136.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:16.362Z,1516701136.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:16.468Z,1516701136.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:16.493Z,1516701136.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:16.844Z,1516701136.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:16.862Z,1516701136.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:17.253Z,1516701137.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:17.272Z,1516701137.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:17.651Z,1516701137.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:17.666Z,1516701137.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:18.040Z,1516701138.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:18.073Z,1516701138.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:18.445Z,1516701138.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:18.463Z,1516701138.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:18.847Z,1516701138.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:18.862Z,1516701138.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:19.249Z,1516701139.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:19.264Z,1516701139.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:19.647Z,1516701139.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:19.687Z,1516701139.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:20.048Z,1516701140.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:20.066Z,1516701140.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:20.441Z,1516701140.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:20.459Z,1516701140.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:20.844Z,1516701140.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:20.859Z,1516701140.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:21.244Z,1516701141.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:21.290Z,1516701141.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:21.641Z,1516701141.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:21.660Z,1516701141.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:22.048Z,1516701142.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:22.068Z,1516701142.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:22.449Z,1516701142.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:22.469Z,1516701142.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:22.859Z,1516701142.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:22.896Z,1516701142.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:23.241Z,1516701143.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:23.267Z,1516701143.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:23.640Z,1516701143.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:23.659Z,1516701143.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:24.042Z,1516701144.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:24.058Z,1516701144.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:24.442Z,1516701144.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:24.472Z,1516701144.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:24.844Z,1516701144.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:24.863Z,1516701144.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:25.245Z,1516701145.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:25.264Z,1516701145.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:25.649Z,1516701145.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:25.664Z,1516701145.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:26.048Z,1516701146.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:26.088Z,1516701146.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:26.440Z,1516701146.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:26.455Z,1516701146.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:26.841Z,1516701146.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:26.860Z,1516701146.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:27.240Z,1516701147.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:27.265Z,1516701147.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:27.640Z,1516701147.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:27.691Z,1516701147.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:28.046Z,1516701148.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:28.062Z,1516701148.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:28.452Z,1516701148.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:28.470Z,1516701148.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:28.852Z,1516701148.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:28.867Z,1516701148.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:29.241Z,1516701149.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:29.265Z,1516701149.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:29.640Z,1516701149.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:29.659Z,1516701149.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:30.035Z,1516701150.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:30.077Z,1516701150.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:30.447Z,1516701150.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:30.464Z,1516701150.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:30.845Z,1516701150.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:30.878Z,1516701150.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:31.254Z,1516701151.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:31.279Z,1516701151.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:31.657Z,1516701151.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:31.674Z,1516701151.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:32.053Z,1516701152.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:32.070Z,1516701152.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:32.432Z,1516701152.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:32.473Z,1516701152.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:32.846Z,1516701152.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:32.861Z,1516701152.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:33.234Z,1516701153.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:33.263Z,1516701153.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:33.633Z,1516701153.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:33.666Z,1516701153.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:34.053Z,1516701154.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:34.068Z,1516701154.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:34.452Z,1516701154.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:34.476Z,1516701154.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:34.848Z,1516701154.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:34.883Z,1516701154.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:35.236Z,1516701155.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:35.268Z,1516701155.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:35.634Z,1516701155.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:35.665Z,1516701155.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:36.033Z,1516701156.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:36.060Z,1516701156.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:36.438Z,1516701156.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:36.482Z,1516701156.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:36.830Z,1516701156.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:36.846Z,1516701156.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:37.252Z,1516701157.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:37.285Z,1516701157.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:37.648Z,1516701157.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:37.688Z,1516701157.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:38.043Z,1516701158.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:38.084Z,1516701158.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:38.438Z,1516701158.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:38.453Z,1516701158.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:38.845Z,1516701158.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:38.860Z,1516701158.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:39.243Z,1516701159.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:39.258Z,1516701159.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:39.638Z,1516701159.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:39.659Z,1516701159.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:39.659Z,1516701159.659 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132 2018-01-23T09:52:39.659Z,1516701159.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:52:39.661Z,1516701159.661 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:39.661Z,1516701159.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 132 2018-01-23T09:52:39.661Z,1516701159.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:52:39.664Z,1516701159.664 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:39.664Z,1516701159.664 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132 2018-01-23T09:52:39.664Z,1516701159.664 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:52:39.689Z,1516701159.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:52:39.689Z,1516701159.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:52:39.690Z,1516701159.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:52:40.052Z,1516701160.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:40.110Z,1516701160.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:52:40.110Z,1516701160.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132 2018-01-23T09:52:40.110Z,1516701160.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:52:40.110Z,1516701160.110 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 132 2018-01-23T09:52:40.111Z,1516701160.111 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:52:40.111Z,1516701160.111 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132 2018-01-23T09:52:40.455Z,1516701160.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:40.469Z,1516701160.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:52:40.470Z,1516701160.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:52:40.470Z,1516701160.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:52:40.470Z,1516701160.470 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:52:40.472Z,1516701160.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:52:40.472Z,1516701160.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:52:40.472Z,1516701160.472 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:52:40.473Z,1516701160.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:52:40.473Z,1516701160.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:52:40.848Z,1516701160.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:40.885Z,1516701160.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:52:40.886Z,1516701160.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:41.236Z,1516701161.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:41.263Z,1516701161.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:52:41.264Z,1516701161.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:41.630Z,1516701161.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:41.657Z,1516701161.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:52:41.658Z,1516701161.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:42.032Z,1516701162.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:42.065Z,1516701162.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:52:42.066Z,1516701162.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:42.437Z,1516701162.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:42.470Z,1516701162.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:52:42.471Z,1516701162.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:42.830Z,1516701162.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:42.845Z,1516701162.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:52:42.846Z,1516701162.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:43.243Z,1516701163.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:43.272Z,1516701163.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:52:43.274Z,1516701163.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:43.647Z,1516701163.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:43.673Z,1516701163.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:52:43.674Z,1516701163.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:44.044Z,1516701164.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:44.069Z,1516701164.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:52:44.070Z,1516701164.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:44.431Z,1516701164.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:44.448Z,1516701164.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:52:44.449Z,1516701164.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:44.832Z,1516701164.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:44.846Z,1516701164.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:52:44.847Z,1516701164.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:45.237Z,1516701165.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:45.252Z,1516701165.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:52:45.253Z,1516701165.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:45.645Z,1516701165.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:45.684Z,1516701165.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:52:45.685Z,1516701165.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:46.055Z,1516701166.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:46.091Z,1516701166.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:52:46.092Z,1516701166.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:46.455Z,1516701166.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:46.486Z,1516701166.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:52:46.491Z,1516701166.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:46.843Z,1516701166.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:46.858Z,1516701166.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:52:46.859Z,1516701166.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:47.241Z,1516701167.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:47.260Z,1516701167.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:52:47.261Z,1516701167.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:47.638Z,1516701167.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:47.653Z,1516701167.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:52:47.654Z,1516701167.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:48.040Z,1516701168.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:48.054Z,1516701168.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:52:48.056Z,1516701168.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:48.442Z,1516701168.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:48.456Z,1516701168.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:52:48.457Z,1516701168.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:48.840Z,1516701168.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:48.854Z,1516701168.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:52:48.856Z,1516701168.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:49.246Z,1516701169.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:49.264Z,1516701169.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:52:49.265Z,1516701169.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:49.647Z,1516701169.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:49.668Z,1516701169.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:52:49.669Z,1516701169.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:50.046Z,1516701170.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:50.064Z,1516701170.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:52:50.065Z,1516701170.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:50.440Z,1516701170.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:50.454Z,1516701170.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:52:50.456Z,1516701170.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:50.841Z,1516701170.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:50.855Z,1516701170.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:52:50.856Z,1516701170.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:51.237Z,1516701171.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:51.259Z,1516701171.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:52:51.260Z,1516701171.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:51.636Z,1516701171.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:51.664Z,1516701171.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:52:51.665Z,1516701171.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:52.052Z,1516701172.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:52.066Z,1516701172.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:52:52.067Z,1516701172.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:52.454Z,1516701172.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:52.469Z,1516701172.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:52:52.469Z,1516701172.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:52.854Z,1516701172.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:52.872Z,1516701172.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:52:52.873Z,1516701172.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:53.233Z,1516701173.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:53.258Z,1516701173.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:52:53.259Z,1516701173.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:53.630Z,1516701173.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:53.665Z,1516701173.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:52:53.666Z,1516701173.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:54.032Z,1516701174.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:54.064Z,1516701174.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:52:54.065Z,1516701174.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:54.433Z,1516701174.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:54.459Z,1516701174.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:52:54.460Z,1516701174.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:54.830Z,1516701174.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:54.864Z,1516701174.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:52:54.865Z,1516701174.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:55.248Z,1516701175.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:55.268Z,1516701175.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T09:52:55.269Z,1516701175.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:55.654Z,1516701175.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:55.669Z,1516701175.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:52:55.670Z,1516701175.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:56.048Z,1516701176.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:56.070Z,1516701176.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:52:56.076Z,1516701176.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:56.432Z,1516701176.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:56.458Z,1516701176.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:52:56.459Z,1516701176.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:56.831Z,1516701176.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:56.866Z,1516701176.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:52:56.867Z,1516701176.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:57.233Z,1516701177.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:57.264Z,1516701177.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:52:57.265Z,1516701177.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:57.632Z,1516701177.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:57.658Z,1516701177.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:52:57.659Z,1516701177.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:58.050Z,1516701178.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:58.076Z,1516701178.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:52:58.077Z,1516701178.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:58.455Z,1516701178.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:58.470Z,1516701178.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:52:58.471Z,1516701178.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:58.855Z,1516701178.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:58.870Z,1516701178.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:52:58.871Z,1516701178.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:59.233Z,1516701179.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:59.267Z,1516701179.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:52:59.268Z,1516701179.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:52:59.632Z,1516701179.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:52:59.658Z,1516701179.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T09:52:59.659Z,1516701179.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:00.049Z,1516701180.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:00.068Z,1516701180.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:00.455Z,1516701180.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:00.476Z,1516701180.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:00.848Z,1516701180.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:00.878Z,1516701180.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:01.233Z,1516701181.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:01.259Z,1516701181.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:01.632Z,1516701181.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:01.671Z,1516701181.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:02.049Z,1516701182.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:02.069Z,1516701182.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:02.452Z,1516701182.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:02.479Z,1516701182.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:02.856Z,1516701182.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:02.870Z,1516701182.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:03.233Z,1516701183.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:03.268Z,1516701183.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:03.631Z,1516701183.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:03.668Z,1516701183.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:04.051Z,1516701184.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:04.070Z,1516701184.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:04.458Z,1516701184.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:04.481Z,1516701184.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:04.851Z,1516701184.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:04.866Z,1516701184.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:05.233Z,1516701185.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:05.265Z,1516701185.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:05.630Z,1516701185.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:05.654Z,1516701185.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:06.043Z,1516701186.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:06.078Z,1516701186.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:06.456Z,1516701186.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:06.471Z,1516701186.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:06.843Z,1516701186.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:06.877Z,1516701186.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:07.233Z,1516701187.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:07.264Z,1516701187.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:07.632Z,1516701187.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:07.676Z,1516701187.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:08.043Z,1516701188.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:08.069Z,1516701188.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:08.447Z,1516701188.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:08.481Z,1516701188.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:08.842Z,1516701188.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:08.877Z,1516701188.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:09.233Z,1516701189.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:09.248Z,1516701189.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:09.632Z,1516701189.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:09.653Z,1516701189.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:10.051Z,1516701190.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:10.078Z,1516701190.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:10.455Z,1516701190.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:10.481Z,1516701190.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:10.855Z,1516701190.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:10.881Z,1516701190.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:11.237Z,1516701191.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:11.252Z,1516701191.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:11.634Z,1516701191.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:11.649Z,1516701191.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:12.055Z,1516701192.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:12.079Z,1516701192.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:12.459Z,1516701192.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:12.484Z,1516701192.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:12.848Z,1516701192.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:12.862Z,1516701192.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:13.239Z,1516701193.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:13.262Z,1516701193.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:13.644Z,1516701193.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:13.659Z,1516701193.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:16.755Z,1516701196.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:16.786Z,1516701196.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:16.891Z,1516701196.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:16.933Z,1516701196.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:17.243Z,1516701197.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:17.259Z,1516701197.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:17.643Z,1516701197.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:17.658Z,1516701197.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:18.033Z,1516701198.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:18.056Z,1516701198.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:18.436Z,1516701198.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:18.456Z,1516701198.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:18.839Z,1516701198.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:18.853Z,1516701198.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:19.247Z,1516701199.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:19.262Z,1516701199.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:19.646Z,1516701199.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:19.661Z,1516701199.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:20.047Z,1516701200.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:20.068Z,1516701200.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:20.439Z,1516701200.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:20.461Z,1516701200.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:20.840Z,1516701200.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:20.861Z,1516701200.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:21.238Z,1516701201.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:21.253Z,1516701201.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:21.632Z,1516701201.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:21.653Z,1516701201.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:22.042Z,1516701202.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:22.069Z,1516701202.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:22.450Z,1516701202.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:22.465Z,1516701202.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:22.847Z,1516701202.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:22.862Z,1516701202.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:23.233Z,1516701203.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:23.256Z,1516701203.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:23.637Z,1516701203.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:23.665Z,1516701203.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:24.046Z,1516701204.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:24.062Z,1516701204.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:24.450Z,1516701204.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:24.469Z,1516701204.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:24.848Z,1516701204.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:24.863Z,1516701204.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:25.236Z,1516701205.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:25.256Z,1516701205.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:25.631Z,1516701205.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:25.664Z,1516701205.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:26.048Z,1516701206.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:26.063Z,1516701206.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:26.450Z,1516701206.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:26.465Z,1516701206.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:26.846Z,1516701206.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:26.861Z,1516701206.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:27.238Z,1516701207.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:27.260Z,1516701207.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:27.626Z,1516701207.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:27.658Z,1516701207.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:28.051Z,1516701208.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:28.066Z,1516701208.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:28.451Z,1516701208.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:28.472Z,1516701208.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:28.844Z,1516701208.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:28.865Z,1516701208.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:29.228Z,1516701209.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:29.254Z,1516701209.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:29.629Z,1516701209.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:29.660Z,1516701209.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:30.026Z,1516701210.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:30.061Z,1516701210.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:30.446Z,1516701210.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:30.469Z,1516701210.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:30.856Z,1516701210.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:30.870Z,1516701210.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:31.248Z,1516701211.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:31.262Z,1516701211.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:31.628Z,1516701211.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:31.661Z,1516701211.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:32.028Z,1516701212.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:32.063Z,1516701212.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:32.438Z,1516701212.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:32.465Z,1516701212.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:32.836Z,1516701212.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:32.851Z,1516701212.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:33.242Z,1516701213.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:33.264Z,1516701213.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:33.642Z,1516701213.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:33.657Z,1516701213.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:34.041Z,1516701214.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:34.061Z,1516701214.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:34.437Z,1516701214.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:34.452Z,1516701214.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:34.832Z,1516701214.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:34.852Z,1516701214.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:35.236Z,1516701215.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:35.251Z,1516701215.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:35.637Z,1516701215.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:35.652Z,1516701215.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:36.033Z,1516701216.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:36.052Z,1516701216.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:36.441Z,1516701216.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:36.461Z,1516701216.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:36.847Z,1516701216.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:36.861Z,1516701216.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:37.244Z,1516701217.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:37.259Z,1516701217.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:37.636Z,1516701217.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:37.657Z,1516701217.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:38.041Z,1516701218.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:38.055Z,1516701218.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:38.440Z,1516701218.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:38.461Z,1516701218.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:38.835Z,1516701218.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:38.850Z,1516701218.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:39.242Z,1516701219.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:39.264Z,1516701219.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:39.642Z,1516701219.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:39.661Z,1516701219.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:40.040Z,1516701220.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:40.061Z,1516701220.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:40.441Z,1516701220.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:40.455Z,1516701220.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:40.833Z,1516701220.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:40.852Z,1516701220.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:41.238Z,1516701221.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:41.253Z,1516701221.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:41.638Z,1516701221.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:41.653Z,1516701221.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:42.033Z,1516701222.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:42.053Z,1516701222.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:42.441Z,1516701222.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:42.461Z,1516701222.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:42.847Z,1516701222.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:42.862Z,1516701222.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:43.244Z,1516701223.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:43.259Z,1516701223.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:43.636Z,1516701223.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:43.657Z,1516701223.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:44.041Z,1516701224.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:44.055Z,1516701224.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:44.440Z,1516701224.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:44.461Z,1516701224.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:44.836Z,1516701224.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:44.857Z,1516701224.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:45.243Z,1516701225.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:45.258Z,1516701225.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:45.642Z,1516701225.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:45.661Z,1516701225.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:46.043Z,1516701226.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:46.058Z,1516701226.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:46.437Z,1516701226.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:46.452Z,1516701226.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:46.832Z,1516701226.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:46.852Z,1516701226.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:47.232Z,1516701227.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:47.261Z,1516701227.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:47.638Z,1516701227.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:47.653Z,1516701227.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:48.036Z,1516701228.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:48.051Z,1516701228.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:48.443Z,1516701228.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:48.458Z,1516701228.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:48.843Z,1516701228.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:48.857Z,1516701228.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:49.244Z,1516701229.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:49.259Z,1516701229.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:49.637Z,1516701229.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:49.652Z,1516701229.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:50.038Z,1516701230.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:50.060Z,1516701230.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:50.438Z,1516701230.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:50.453Z,1516701230.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:50.832Z,1516701230.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:50.855Z,1516701230.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:51.251Z,1516701231.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:51.266Z,1516701231.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:51.644Z,1516701231.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:51.672Z,1516701231.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:52.052Z,1516701232.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:52.066Z,1516701232.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:52.428Z,1516701232.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:52.462Z,1516701232.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:52.826Z,1516701232.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:52.858Z,1516701232.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:53.233Z,1516701233.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:53.261Z,1516701233.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:53.630Z,1516701233.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:53.667Z,1516701233.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:54.027Z,1516701234.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:54.054Z,1516701234.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:54.449Z,1516701234.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:54.464Z,1516701234.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:54.853Z,1516701234.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:54.868Z,1516701234.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:55.244Z,1516701235.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:55.275Z,1516701235.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:55.628Z,1516701235.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:55.666Z,1516701235.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:56.029Z,1516701236.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:56.073Z,1516701236.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:56.434Z,1516701236.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:56.465Z,1516701236.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:56.829Z,1516701236.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:56.849Z,1516701236.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:57.247Z,1516701237.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:57.276Z,1516701237.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:57.644Z,1516701237.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:57.682Z,1516701237.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:58.051Z,1516701238.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:58.079Z,1516701238.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:58.432Z,1516701238.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:58.448Z,1516701238.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:58.829Z,1516701238.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:58.846Z,1516701238.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:59.240Z,1516701239.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:59.277Z,1516701239.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:53:59.638Z,1516701239.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:53:59.653Z,1516701239.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:00.032Z,1516701240.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:00.052Z,1516701240.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:00.443Z,1516701240.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:00.459Z,1516701240.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:00.843Z,1516701240.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:00.858Z,1516701240.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:01.240Z,1516701241.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:01.255Z,1516701241.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:01.635Z,1516701241.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:01.664Z,1516701241.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:02.037Z,1516701242.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:02.051Z,1516701242.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:02.436Z,1516701242.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:02.455Z,1516701242.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:02.836Z,1516701242.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:02.851Z,1516701242.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:03.243Z,1516701243.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:03.257Z,1516701243.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:03.642Z,1516701243.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:03.661Z,1516701243.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:04.040Z,1516701244.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:04.061Z,1516701244.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:04.441Z,1516701244.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:04.455Z,1516701244.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:04.832Z,1516701244.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:04.852Z,1516701244.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:05.232Z,1516701245.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:05.261Z,1516701245.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:05.638Z,1516701245.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:05.653Z,1516701245.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:06.036Z,1516701246.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:06.051Z,1516701246.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:06.441Z,1516701246.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:06.461Z,1516701246.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:06.847Z,1516701246.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:06.862Z,1516701246.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:07.244Z,1516701247.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:07.259Z,1516701247.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:07.636Z,1516701247.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:07.663Z,1516701247.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:08.037Z,1516701248.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:08.052Z,1516701248.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:08.436Z,1516701248.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:08.455Z,1516701248.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:08.836Z,1516701248.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:08.851Z,1516701248.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:09.242Z,1516701249.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:09.264Z,1516701249.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:09.640Z,1516701249.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:09.660Z,1516701249.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:10.046Z,1516701250.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:10.061Z,1516701250.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:10.437Z,1516701250.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:10.452Z,1516701250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:10.832Z,1516701250.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:10.852Z,1516701250.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:11.236Z,1516701251.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:11.251Z,1516701251.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:11.638Z,1516701251.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:11.653Z,1516701251.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:12.032Z,1516701252.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:12.052Z,1516701252.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:12.056Z,1516701252.056 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:49:11.0Z 2018-01-23T09:54:12.056Z,1516701252.056 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T09:54:12.056Z,1516701252.056 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T09:54:12.444Z,1516701252.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:12.467Z,1516701252.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:12.963Z,1516701252.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:12.978Z,1516701252.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:13.251Z,1516701253.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:13.266Z,1516701253.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:16.359Z,1516701256.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:16.401Z,1516701256.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:16.459Z,1516701256.459 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0156.lzma 2018-01-23T09:54:16.479Z,1516701256.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:16.525Z,1516701256.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:16.875Z,1516701256.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:16.900Z,1516701256.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:17.244Z,1516701257.244 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0156.lzma.bak 2018-01-23T09:54:17.244Z,1516701257.244 [DataOverHttps](INFO): SBD MOMSN=7755385 2018-01-23T09:54:17.303Z,1516701257.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:17.317Z,1516701257.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:17.908Z,1516701257.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:17.923Z,1516701257.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:18.069Z,1516701258.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:18.105Z,1516701258.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:21.204Z,1516701261.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:21.220Z,1516701261.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:21.233Z,1516701261.233 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T09:54:21.321Z,1516701261.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:21.364Z,1516701261.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:21.684Z,1516701261.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:21.713Z,1516701261.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:22.094Z,1516701262.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:22.109Z,1516701262.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:22.479Z,1516701262.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:22.509Z,1516701262.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:22.873Z,1516701262.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:22.909Z,1516701262.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:25.963Z,1516701265.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:25.979Z,1516701265.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:26.067Z,1516701266.067 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0157.lzma 2018-01-23T09:54:26.088Z,1516701266.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:26.137Z,1516701266.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:26.459Z,1516701266.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:26.474Z,1516701266.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:26.817Z,1516701266.817 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0157.lzma.bak 2018-01-23T09:54:26.817Z,1516701266.817 [DataOverHttps](INFO): SBD MOMSN=7755387 2018-01-23T09:54:26.862Z,1516701266.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:26.902Z,1516701266.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:27.488Z,1516701267.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:27.518Z,1516701267.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:27.521Z,1516701267.521 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T09:54:27.521Z,1516701267.521 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T09:54:27.521Z,1516701267.521 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T09:54:27.637Z,1516701267.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:27.665Z,1516701267.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:30.821Z,1516701270.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:30.841Z,1516701270.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:30.945Z,1516701270.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:30.989Z,1516701270.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:31.335Z,1516701271.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:31.367Z,1516701271.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:31.739Z,1516701271.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:31.754Z,1516701271.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:32.128Z,1516701272.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:32.143Z,1516701272.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:32.517Z,1516701272.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:32.548Z,1516701272.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:32.925Z,1516701272.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:32.940Z,1516701272.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:33.325Z,1516701273.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:33.345Z,1516701273.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:33.721Z,1516701273.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:33.736Z,1516701273.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:34.121Z,1516701274.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:34.135Z,1516701274.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:34.531Z,1516701274.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:34.546Z,1516701274.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:34.930Z,1516701274.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:34.945Z,1516701274.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:35.331Z,1516701275.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:35.346Z,1516701275.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:35.725Z,1516701275.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:35.740Z,1516701275.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:36.120Z,1516701276.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:36.135Z,1516701276.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:36.522Z,1516701276.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:36.536Z,1516701276.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:36.921Z,1516701276.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:36.936Z,1516701276.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:37.332Z,1516701277.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:37.347Z,1516701277.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:37.732Z,1516701277.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:37.753Z,1516701277.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:38.131Z,1516701278.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:38.146Z,1516701278.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:38.522Z,1516701278.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:38.537Z,1516701278.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:38.924Z,1516701278.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:38.938Z,1516701278.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:39.322Z,1516701279.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:39.345Z,1516701279.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:39.720Z,1516701279.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:39.748Z,1516701279.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:40.131Z,1516701280.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:40.146Z,1516701280.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:40.530Z,1516701280.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:40.551Z,1516701280.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:40.932Z,1516701280.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:40.961Z,1516701280.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:41.341Z,1516701281.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:41.356Z,1516701281.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:41.714Z,1516701281.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:41.757Z,1516701281.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:42.118Z,1516701282.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:42.155Z,1516701282.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:42.514Z,1516701282.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:42.550Z,1516701282.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:42.913Z,1516701282.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:42.930Z,1516701282.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:43.324Z,1516701283.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:43.357Z,1516701283.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:43.737Z,1516701283.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:43.767Z,1516701283.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:44.128Z,1516701284.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:44.160Z,1516701284.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:44.520Z,1516701284.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:44.537Z,1516701284.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:44.924Z,1516701284.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:44.939Z,1516701284.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:45.320Z,1516701285.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:45.335Z,1516701285.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:45.718Z,1516701285.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:45.744Z,1516701285.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:46.120Z,1516701286.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:46.134Z,1516701286.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:46.523Z,1516701286.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:46.539Z,1516701286.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:46.927Z,1516701286.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:46.942Z,1516701286.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:47.327Z,1516701287.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:47.341Z,1516701287.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:47.720Z,1516701287.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:47.735Z,1516701287.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:48.120Z,1516701288.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:48.141Z,1516701288.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:48.522Z,1516701288.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:48.536Z,1516701288.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:48.921Z,1516701288.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:48.941Z,1516701288.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:49.325Z,1516701289.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:49.345Z,1516701289.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:49.727Z,1516701289.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:49.741Z,1516701289.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:50.126Z,1516701290.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:50.145Z,1516701290.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:50.520Z,1516701290.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:50.535Z,1516701290.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:50.921Z,1516701290.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:50.935Z,1516701290.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:51.316Z,1516701291.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:51.338Z,1516701291.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:51.716Z,1516701291.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:51.747Z,1516701291.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:52.121Z,1516701292.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:52.136Z,1516701292.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:52.531Z,1516701292.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:52.546Z,1516701292.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:52.933Z,1516701292.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:52.960Z,1516701292.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:53.323Z,1516701293.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:53.360Z,1516701293.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:53.717Z,1516701293.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:53.749Z,1516701293.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:54.112Z,1516701294.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:54.145Z,1516701294.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:54.513Z,1516701294.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:54.528Z,1516701294.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:54.911Z,1516701294.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:54.976Z,1516701294.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:55.323Z,1516701295.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:55.338Z,1516701295.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:55.727Z,1516701295.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:55.741Z,1516701295.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:56.124Z,1516701296.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:56.139Z,1516701296.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:56.519Z,1516701296.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:56.535Z,1516701296.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:56.921Z,1516701296.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:56.936Z,1516701296.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:57.321Z,1516701297.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:57.336Z,1516701297.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:57.717Z,1516701297.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:57.732Z,1516701297.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:58.124Z,1516701298.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:58.139Z,1516701298.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:58.523Z,1516701298.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:58.539Z,1516701298.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:58.931Z,1516701298.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:58.946Z,1516701298.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:59.323Z,1516701299.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:59.344Z,1516701299.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:54:59.721Z,1516701299.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:54:59.736Z,1516701299.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:00.120Z,1516701300.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:00.134Z,1516701300.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:00.521Z,1516701300.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:00.540Z,1516701300.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:00.917Z,1516701300.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:00.932Z,1516701300.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:01.323Z,1516701301.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:01.338Z,1516701301.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:01.727Z,1516701301.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:01.742Z,1516701301.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:02.124Z,1516701302.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:02.138Z,1516701302.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:02.514Z,1516701302.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:02.545Z,1516701302.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:02.912Z,1516701302.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:02.939Z,1516701302.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:03.312Z,1516701303.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:03.345Z,1516701303.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:03.713Z,1516701303.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:03.745Z,1516701303.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:04.112Z,1516701304.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:04.148Z,1516701304.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:04.528Z,1516701304.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:04.556Z,1516701304.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:04.939Z,1516701304.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:04.954Z,1516701304.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:05.332Z,1516701305.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:05.346Z,1516701305.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:05.712Z,1516701305.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:05.738Z,1516701305.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:06.112Z,1516701306.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:06.145Z,1516701306.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:06.513Z,1516701306.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:06.548Z,1516701306.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:06.910Z,1516701306.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:06.937Z,1516701306.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:07.336Z,1516701307.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:07.351Z,1516701307.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:07.736Z,1516701307.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:07.751Z,1516701307.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:08.127Z,1516701308.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:08.150Z,1516701308.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:08.516Z,1516701308.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:08.549Z,1516701308.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:08.912Z,1516701308.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:08.949Z,1516701308.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:09.316Z,1516701309.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:09.349Z,1516701309.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:09.713Z,1516701309.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:09.741Z,1516701309.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:10.112Z,1516701310.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:10.127Z,1516701310.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:10.523Z,1516701310.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:10.558Z,1516701310.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:10.927Z,1516701310.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:10.954Z,1516701310.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:11.322Z,1516701311.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:11.361Z,1516701311.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:11.710Z,1516701311.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:11.726Z,1516701311.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:12.125Z,1516701312.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:12.156Z,1516701312.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:12.518Z,1516701312.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:12.533Z,1516701312.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:12.914Z,1516701312.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:12.929Z,1516701312.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:13.331Z,1516701313.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:13.364Z,1516701313.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:13.739Z,1516701313.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:13.765Z,1516701313.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:14.127Z,1516701314.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:14.142Z,1516701314.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:14.522Z,1516701314.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:14.537Z,1516701314.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:14.920Z,1516701314.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:14.935Z,1516701314.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:15.318Z,1516701315.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:15.333Z,1516701315.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:15.718Z,1516701315.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:15.745Z,1516701315.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:16.121Z,1516701316.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:16.136Z,1516701316.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:16.528Z,1516701316.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:16.543Z,1516701316.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:16.927Z,1516701316.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:16.942Z,1516701316.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:17.324Z,1516701317.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:17.339Z,1516701317.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:17.720Z,1516701317.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:17.744Z,1516701317.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:18.125Z,1516701318.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:18.141Z,1516701318.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:18.523Z,1516701318.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:18.538Z,1516701318.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:18.916Z,1516701318.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:18.939Z,1516701318.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:19.331Z,1516701319.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:19.346Z,1516701319.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:19.731Z,1516701319.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:19.746Z,1516701319.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:20.127Z,1516701320.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:20.155Z,1516701320.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:20.521Z,1516701320.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:20.542Z,1516701320.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:20.927Z,1516701320.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:20.942Z,1516701320.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:21.324Z,1516701321.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:21.339Z,1516701321.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:21.723Z,1516701321.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:21.746Z,1516701321.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:22.112Z,1516701322.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:22.141Z,1516701322.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:22.528Z,1516701322.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:22.565Z,1516701322.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:22.942Z,1516701322.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:22.957Z,1516701322.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:23.322Z,1516701323.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:23.352Z,1516701323.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:23.712Z,1516701323.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:23.746Z,1516701323.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:24.112Z,1516701324.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:24.152Z,1516701324.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:24.513Z,1516701324.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:24.551Z,1516701324.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:24.910Z,1516701324.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:24.925Z,1516701324.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:25.323Z,1516701325.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:25.350Z,1516701325.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:25.727Z,1516701325.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:25.764Z,1516701325.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:26.123Z,1516701326.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:26.160Z,1516701326.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:26.512Z,1516701326.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:26.549Z,1516701326.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:26.912Z,1516701326.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:26.927Z,1516701326.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:27.321Z,1516701327.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:27.357Z,1516701327.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:27.718Z,1516701327.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:27.733Z,1516701327.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:28.121Z,1516701328.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:28.135Z,1516701328.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:31.220Z,1516701331.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:31.235Z,1516701331.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:31.362Z,1516701331.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:31.397Z,1516701331.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:31.715Z,1516701331.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:31.730Z,1516701331.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:32.097Z,1516701332.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:32.123Z,1516701332.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:32.494Z,1516701332.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:32.528Z,1516701332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:32.893Z,1516701332.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:32.925Z,1516701332.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:33.317Z,1516701333.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:33.332Z,1516701333.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:33.719Z,1516701333.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:33.734Z,1516701333.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:34.103Z,1516701334.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:34.137Z,1516701334.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:34.493Z,1516701334.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:34.531Z,1516701334.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:34.890Z,1516701334.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:34.905Z,1516701334.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:35.293Z,1516701335.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:35.308Z,1516701335.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:35.698Z,1516701335.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:35.741Z,1516701335.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:36.093Z,1516701336.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:36.113Z,1516701336.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:36.511Z,1516701336.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:36.542Z,1516701336.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:36.915Z,1516701336.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:36.949Z,1516701336.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:37.315Z,1516701337.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:37.345Z,1516701337.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:37.697Z,1516701337.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:37.720Z,1516701337.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:38.101Z,1516701338.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:38.116Z,1516701338.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:38.496Z,1516701338.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:38.527Z,1516701338.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:38.900Z,1516701338.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:38.921Z,1516701338.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:39.307Z,1516701339.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:39.321Z,1516701339.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:39.719Z,1516701339.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:39.734Z,1516701339.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:40.110Z,1516701340.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:40.125Z,1516701340.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:40.502Z,1516701340.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:40.517Z,1516701340.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:40.517Z,1516701340.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133 2018-01-23T09:55:40.517Z,1516701340.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:55:40.519Z,1516701340.519 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:40.519Z,1516701340.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 133 2018-01-23T09:55:40.519Z,1516701340.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:55:40.520Z,1516701340.520 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:40.521Z,1516701340.521 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133 2018-01-23T09:55:40.521Z,1516701340.521 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:55:40.532Z,1516701340.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:55:40.532Z,1516701340.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:55:40.533Z,1516701340.533 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:55:40.900Z,1516701340.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:40.929Z,1516701340.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:55:40.929Z,1516701340.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133 2018-01-23T09:55:40.930Z,1516701340.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:55:40.930Z,1516701340.930 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 133 2018-01-23T09:55:40.930Z,1516701340.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:55:40.930Z,1516701340.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133 2018-01-23T09:55:41.308Z,1516701341.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:41.330Z,1516701341.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:55:41.330Z,1516701341.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:55:41.335Z,1516701341.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:55:41.335Z,1516701341.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:55:41.336Z,1516701341.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:55:41.336Z,1516701341.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:55:41.336Z,1516701341.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:55:41.337Z,1516701341.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:55:41.337Z,1516701341.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:55:41.716Z,1516701341.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:41.736Z,1516701341.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:55:41.737Z,1516701341.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:42.108Z,1516701342.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:42.129Z,1516701342.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:55:42.130Z,1516701342.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:42.493Z,1516701342.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:42.519Z,1516701342.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:55:42.520Z,1516701342.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:42.891Z,1516701342.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:42.926Z,1516701342.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:55:42.927Z,1516701342.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:43.308Z,1516701343.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:43.329Z,1516701343.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:55:43.330Z,1516701343.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:43.715Z,1516701343.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:43.730Z,1516701343.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:55:43.731Z,1516701343.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:44.111Z,1516701344.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:44.126Z,1516701344.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:55:44.127Z,1516701344.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:44.494Z,1516701344.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:44.519Z,1516701344.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:55:44.520Z,1516701344.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:44.892Z,1516701344.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:44.924Z,1516701344.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:55:44.925Z,1516701344.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:45.310Z,1516701345.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:45.325Z,1516701345.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:55:45.326Z,1516701345.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:45.715Z,1516701345.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:45.730Z,1516701345.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:55:45.731Z,1516701345.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:46.111Z,1516701346.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:46.126Z,1516701346.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:55:46.127Z,1516701346.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:46.493Z,1516701346.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:46.528Z,1516701346.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:55:46.529Z,1516701346.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:46.890Z,1516701346.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:46.917Z,1516701346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:55:46.918Z,1516701346.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:47.311Z,1516701347.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:47.326Z,1516701347.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:55:47.327Z,1516701347.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:47.716Z,1516701347.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:47.730Z,1516701347.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:55:47.731Z,1516701347.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:48.111Z,1516701348.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:48.126Z,1516701348.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:55:48.127Z,1516701348.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:48.521Z,1516701348.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:48.549Z,1516701348.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:55:48.550Z,1516701348.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:48.923Z,1516701348.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:48.949Z,1516701348.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:55:48.950Z,1516701348.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:49.317Z,1516701349.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:49.340Z,1516701349.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:55:49.341Z,1516701349.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:49.714Z,1516701349.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:49.758Z,1516701349.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:55:49.763Z,1516701349.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:50.113Z,1516701350.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:50.152Z,1516701350.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:55:50.153Z,1516701350.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:50.503Z,1516701350.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:50.534Z,1516701350.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:55:50.543Z,1516701350.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:50.907Z,1516701350.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:50.934Z,1516701350.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:55:50.939Z,1516701350.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:51.315Z,1516701351.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:51.341Z,1516701351.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:55:51.342Z,1516701351.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:51.716Z,1516701351.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:51.730Z,1516701351.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:55:51.731Z,1516701351.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:52.115Z,1516701352.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:52.165Z,1516701352.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:55:52.166Z,1516701352.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:52.515Z,1516701352.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:52.529Z,1516701352.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:55:52.530Z,1516701352.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:52.893Z,1516701352.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:52.942Z,1516701352.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:55:52.952Z,1516701352.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:53.314Z,1516701353.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:53.350Z,1516701353.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:55:53.359Z,1516701353.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:53.709Z,1516701353.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:53.774Z,1516701353.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T09:55:53.775Z,1516701353.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:54.110Z,1516701354.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:54.141Z,1516701354.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:55:54.142Z,1516701354.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:54.524Z,1516701354.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:54.552Z,1516701354.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:55:54.553Z,1516701354.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:54.907Z,1516701354.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:54.951Z,1516701354.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:55:54.952Z,1516701354.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:55.322Z,1516701355.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:55.360Z,1516701355.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:55:55.361Z,1516701355.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:55.726Z,1516701355.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:55.778Z,1516701355.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T09:55:55.805Z,1516701355.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:56.118Z,1516701356.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:56.168Z,1516701356.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T09:55:56.169Z,1516701356.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:56.506Z,1516701356.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:56.545Z,1516701356.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:55:56.546Z,1516701356.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:56.916Z,1516701356.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:56.955Z,1516701356.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:55:56.956Z,1516701356.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:57.310Z,1516701357.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:57.364Z,1516701357.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:55:57.365Z,1516701357.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:57.709Z,1516701357.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:57.733Z,1516701357.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:55:57.734Z,1516701357.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:58.111Z,1516701358.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:58.145Z,1516701358.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:55:58.146Z,1516701358.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:58.496Z,1516701358.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:58.549Z,1516701358.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:55:58.549Z,1516701358.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:58.894Z,1516701358.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:58.933Z,1516701358.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:55:58.933Z,1516701358.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:59.318Z,1516701359.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:59.338Z,1516701359.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:55:59.343Z,1516701359.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:55:59.734Z,1516701359.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:55:59.753Z,1516701359.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:55:59.754Z,1516701359.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:00.109Z,1516701360.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:00.149Z,1516701360.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:56:00.150Z,1516701360.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:00.499Z,1516701360.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:00.566Z,1516701360.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:00.902Z,1516701360.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:00.988Z,1516701360.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:01.312Z,1516701361.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:01.342Z,1516701361.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:01.725Z,1516701361.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:01.741Z,1516701361.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:02.115Z,1516701362.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:02.145Z,1516701362.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:02.501Z,1516701362.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:02.517Z,1516701362.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:02.897Z,1516701362.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:02.917Z,1516701362.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:03.307Z,1516701363.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:03.322Z,1516701363.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:03.708Z,1516701363.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:03.723Z,1516701363.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:04.106Z,1516701364.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:04.125Z,1516701364.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:04.503Z,1516701364.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:04.517Z,1516701364.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:04.896Z,1516701364.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:04.916Z,1516701364.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:05.306Z,1516701365.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:05.325Z,1516701365.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:05.707Z,1516701365.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:05.722Z,1516701365.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:06.106Z,1516701366.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:06.125Z,1516701366.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:06.500Z,1516701366.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:06.519Z,1516701366.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:06.901Z,1516701366.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:06.916Z,1516701366.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:07.306Z,1516701367.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:07.325Z,1516701367.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:07.708Z,1516701367.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:07.723Z,1516701367.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:08.107Z,1516701368.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:08.121Z,1516701368.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:08.497Z,1516701368.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:08.519Z,1516701368.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:08.901Z,1516701368.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:08.921Z,1516701368.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:09.307Z,1516701369.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:09.321Z,1516701369.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:09.711Z,1516701369.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:09.726Z,1516701369.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:10.106Z,1516701370.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:10.125Z,1516701370.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:10.502Z,1516701370.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:10.517Z,1516701370.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:10.900Z,1516701370.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:10.919Z,1516701370.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:11.306Z,1516701371.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:11.325Z,1516701371.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:11.707Z,1516701371.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:11.722Z,1516701371.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:12.106Z,1516701372.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:12.125Z,1516701372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:12.500Z,1516701372.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:12.519Z,1516701372.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:12.901Z,1516701372.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:12.916Z,1516701372.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:13.306Z,1516701373.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:13.321Z,1516701373.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:13.708Z,1516701373.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:13.723Z,1516701373.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:14.106Z,1516701374.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:14.121Z,1516701374.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:14.500Z,1516701374.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:14.519Z,1516701374.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:14.900Z,1516701374.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:14.921Z,1516701374.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:15.307Z,1516701375.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:15.322Z,1516701375.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:15.711Z,1516701375.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:15.726Z,1516701375.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:16.108Z,1516701376.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:16.123Z,1516701376.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:16.502Z,1516701376.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:16.517Z,1516701376.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:16.900Z,1516701376.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:16.915Z,1516701376.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:17.306Z,1516701377.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:17.325Z,1516701377.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:17.711Z,1516701377.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:17.732Z,1516701377.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:18.106Z,1516701378.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:18.121Z,1516701378.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:18.506Z,1516701378.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:18.521Z,1516701378.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:18.902Z,1516701378.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:18.920Z,1516701378.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:19.308Z,1516701379.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:19.323Z,1516701379.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:19.708Z,1516701379.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:19.723Z,1516701379.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:20.107Z,1516701380.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:20.122Z,1516701380.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:20.500Z,1516701380.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:20.521Z,1516701380.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:20.904Z,1516701380.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:20.919Z,1516701380.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:21.302Z,1516701381.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:21.324Z,1516701381.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:21.708Z,1516701381.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:21.723Z,1516701381.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:22.152Z,1516701382.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:22.167Z,1516701382.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:22.508Z,1516701382.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:22.523Z,1516701382.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:22.894Z,1516701382.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:22.910Z,1516701382.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:23.292Z,1516701383.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:23.308Z,1516701383.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:23.695Z,1516701383.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:23.717Z,1516701383.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:24.096Z,1516701384.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:24.117Z,1516701384.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:24.508Z,1516701384.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:24.523Z,1516701384.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:24.932Z,1516701384.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:24.984Z,1516701384.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:25.308Z,1516701385.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:25.323Z,1516701385.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:25.694Z,1516701385.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:25.709Z,1516701385.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:26.093Z,1516701386.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:26.108Z,1516701386.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:26.494Z,1516701386.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:26.510Z,1516701386.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:26.895Z,1516701386.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:26.917Z,1516701386.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:27.297Z,1516701387.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:27.317Z,1516701387.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:27.708Z,1516701387.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:27.723Z,1516701387.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:28.112Z,1516701388.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:28.152Z,1516701388.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:28.516Z,1516701388.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:28.539Z,1516701388.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:31.589Z,1516701391.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:31.605Z,1516701391.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:31.705Z,1516701391.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:31.732Z,1516701391.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:32.064Z,1516701392.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:32.085Z,1516701392.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:32.479Z,1516701392.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:32.494Z,1516701392.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:32.869Z,1516701392.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:32.892Z,1516701392.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:33.265Z,1516701393.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:33.285Z,1516701393.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:33.666Z,1516701393.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:33.680Z,1516701393.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:34.058Z,1516701394.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:34.075Z,1516701394.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:34.468Z,1516701394.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:34.491Z,1516701394.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:34.877Z,1516701394.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:34.891Z,1516701394.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:35.262Z,1516701395.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:35.290Z,1516701395.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:35.653Z,1516701395.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:35.682Z,1516701395.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:36.048Z,1516701396.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:36.078Z,1516701396.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:36.450Z,1516701396.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:36.490Z,1516701396.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:36.856Z,1516701396.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:36.881Z,1516701396.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:37.250Z,1516701397.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:37.285Z,1516701397.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:37.666Z,1516701397.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:37.698Z,1516701397.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:38.072Z,1516701398.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:38.087Z,1516701398.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:38.468Z,1516701398.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:38.493Z,1516701398.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:38.848Z,1516701398.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:38.881Z,1516701398.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:39.247Z,1516701399.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:39.286Z,1516701399.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:39.649Z,1516701399.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:39.681Z,1516701399.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:40.048Z,1516701400.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:40.084Z,1516701400.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:40.473Z,1516701400.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:40.493Z,1516701400.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:40.875Z,1516701400.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:40.901Z,1516701400.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:41.261Z,1516701401.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:41.297Z,1516701401.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:41.655Z,1516701401.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:41.686Z,1516701401.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:42.051Z,1516701402.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:42.065Z,1516701402.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:42.456Z,1516701402.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:42.497Z,1516701402.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:42.863Z,1516701402.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:42.899Z,1516701402.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:43.259Z,1516701403.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:43.274Z,1516701403.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:43.663Z,1516701403.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:43.678Z,1516701403.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:44.067Z,1516701404.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:44.105Z,1516701404.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:44.465Z,1516701404.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:44.481Z,1516701404.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:44.854Z,1516701404.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:44.872Z,1516701404.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:45.257Z,1516701405.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:45.285Z,1516701405.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:45.658Z,1516701405.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:45.686Z,1516701405.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:46.053Z,1516701406.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:46.078Z,1516701406.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:46.468Z,1516701406.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:46.483Z,1516701406.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:46.868Z,1516701406.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:46.901Z,1516701406.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:47.266Z,1516701407.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:47.306Z,1516701407.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:47.653Z,1516701407.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:47.669Z,1516701407.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T09:56:47.710Z,1516701407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:48.059Z,1516701408.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:48.068Z,1516701408.068 [PNI_TCM](ERROR): CRC does not match. Expected:0x52552 got:0x7234 2018-01-23T09:56:48.085Z,1516701408.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:48.458Z,1516701408.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:48.481Z,1516701408.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:48.849Z,1516701408.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:48.893Z,1516701408.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:49.261Z,1516701409.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:49.280Z,1516701409.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:49.664Z,1516701409.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:49.688Z,1516701409.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:50.073Z,1516701410.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:50.093Z,1516701410.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:50.468Z,1516701410.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:50.493Z,1516701410.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:50.846Z,1516701410.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:50.876Z,1516701410.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:51.252Z,1516701411.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:51.284Z,1516701411.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:51.650Z,1516701411.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:51.685Z,1516701411.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:52.046Z,1516701412.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:52.092Z,1516701412.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:52.471Z,1516701412.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:52.489Z,1516701412.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:52.874Z,1516701412.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:52.888Z,1516701412.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:53.274Z,1516701413.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:53.297Z,1516701413.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:53.649Z,1516701413.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:53.695Z,1516701413.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:54.053Z,1516701414.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:54.086Z,1516701414.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:54.446Z,1516701414.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:54.485Z,1516701414.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:54.853Z,1516701414.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:54.883Z,1516701414.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:55.249Z,1516701415.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:55.280Z,1516701415.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:55.668Z,1516701415.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:55.702Z,1516701415.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:56.073Z,1516701416.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:56.089Z,1516701416.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:56.464Z,1516701416.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:56.503Z,1516701416.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:56.846Z,1516701416.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:56.884Z,1516701416.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:57.248Z,1516701417.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:57.282Z,1516701417.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:57.653Z,1516701417.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:57.689Z,1516701417.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:58.046Z,1516701418.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:58.075Z,1516701418.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:58.459Z,1516701418.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:58.485Z,1516701418.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:58.863Z,1516701418.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:58.901Z,1516701418.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:59.267Z,1516701419.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:59.301Z,1516701419.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:56:59.661Z,1516701419.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:56:59.688Z,1516701419.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:00.061Z,1516701420.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:00.093Z,1516701420.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:00.456Z,1516701420.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:00.495Z,1516701420.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:00.861Z,1516701420.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:00.899Z,1516701420.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:01.261Z,1516701421.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:01.291Z,1516701421.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:01.667Z,1516701421.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:01.690Z,1516701421.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:02.081Z,1516701422.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:02.100Z,1516701422.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:02.480Z,1516701422.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:02.497Z,1516701422.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:02.852Z,1516701422.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:02.889Z,1516701422.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:03.260Z,1516701423.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:03.290Z,1516701423.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:03.660Z,1516701423.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:03.694Z,1516701423.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:04.054Z,1516701424.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:04.090Z,1516701424.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:04.467Z,1516701424.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:04.497Z,1516701424.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:04.885Z,1516701424.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:04.917Z,1516701424.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:05.267Z,1516701425.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:05.293Z,1516701425.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:05.661Z,1516701425.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:05.700Z,1516701425.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:06.057Z,1516701426.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:06.074Z,1516701426.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:06.455Z,1516701426.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:06.470Z,1516701426.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:06.854Z,1516701426.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:06.874Z,1516701426.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:07.256Z,1516701427.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:07.279Z,1516701427.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:07.667Z,1516701427.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:07.686Z,1516701427.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:08.068Z,1516701428.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:08.089Z,1516701428.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:08.469Z,1516701428.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:08.484Z,1516701428.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:08.852Z,1516701428.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:08.879Z,1516701428.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:09.248Z,1516701429.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:09.292Z,1516701429.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:09.667Z,1516701429.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:09.683Z,1516701429.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:10.049Z,1516701430.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:10.085Z,1516701430.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:10.477Z,1516701430.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:10.496Z,1516701430.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:10.869Z,1516701430.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:10.895Z,1516701430.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:11.264Z,1516701431.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:11.287Z,1516701431.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:11.650Z,1516701431.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:11.687Z,1516701431.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:12.054Z,1516701432.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:12.082Z,1516701432.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:12.448Z,1516701432.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:12.493Z,1516701432.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:12.853Z,1516701432.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:12.883Z,1516701432.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:13.248Z,1516701433.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:13.288Z,1516701433.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:13.670Z,1516701433.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:13.685Z,1516701433.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:14.072Z,1516701434.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:14.097Z,1516701434.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:14.458Z,1516701434.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:14.486Z,1516701434.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:14.849Z,1516701434.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:14.882Z,1516701434.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:15.256Z,1516701435.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:15.284Z,1516701435.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:15.650Z,1516701435.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:15.686Z,1516701435.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:16.049Z,1516701436.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:16.080Z,1516701436.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:16.467Z,1516701436.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:16.482Z,1516701436.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:16.870Z,1516701436.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:16.897Z,1516701436.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:17.267Z,1516701437.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:17.282Z,1516701437.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:17.649Z,1516701437.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:17.680Z,1516701437.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:18.048Z,1516701438.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:18.085Z,1516701438.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:18.448Z,1516701438.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:18.480Z,1516701438.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:18.849Z,1516701438.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:18.884Z,1516701438.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:19.248Z,1516701439.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:19.281Z,1516701439.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:19.667Z,1516701439.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:19.682Z,1516701439.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:20.070Z,1516701440.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:20.093Z,1516701440.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:20.458Z,1516701440.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:20.484Z,1516701440.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:20.852Z,1516701440.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:20.878Z,1516701440.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:21.248Z,1516701441.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:21.284Z,1516701441.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:21.650Z,1516701441.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:21.681Z,1516701441.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:22.052Z,1516701442.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:22.079Z,1516701442.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:22.467Z,1516701442.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:22.483Z,1516701442.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:22.871Z,1516701442.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:22.886Z,1516701442.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:23.267Z,1516701443.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:23.282Z,1516701443.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:23.653Z,1516701443.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:23.685Z,1516701443.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:24.048Z,1516701444.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:24.085Z,1516701444.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:24.471Z,1516701444.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:24.486Z,1516701444.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:24.879Z,1516701444.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:24.894Z,1516701444.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:25.269Z,1516701445.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:25.288Z,1516701445.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:25.654Z,1516701445.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:25.700Z,1516701445.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:26.047Z,1516701446.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:26.080Z,1516701446.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:26.467Z,1516701446.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:26.486Z,1516701446.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:26.869Z,1516701446.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:26.889Z,1516701446.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:27.263Z,1516701447.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:27.286Z,1516701447.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:27.649Z,1516701447.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:27.685Z,1516701447.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:28.052Z,1516701448.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:28.078Z,1516701448.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:28.467Z,1516701448.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:28.485Z,1516701448.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:28.875Z,1516701448.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:28.890Z,1516701448.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:31.972Z,1516701451.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:31.993Z,1516701451.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:32.097Z,1516701452.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:32.133Z,1516701452.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:32.448Z,1516701452.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:32.484Z,1516701452.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:32.854Z,1516701452.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:32.889Z,1516701452.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:33.244Z,1516701453.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:33.281Z,1516701453.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:33.659Z,1516701453.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:33.684Z,1516701453.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:34.063Z,1516701454.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:34.092Z,1516701454.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:34.455Z,1516701454.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:34.488Z,1516701454.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:34.849Z,1516701454.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:34.864Z,1516701454.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:35.242Z,1516701455.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:35.273Z,1516701455.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:35.644Z,1516701455.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:35.659Z,1516701455.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:36.042Z,1516701456.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:36.065Z,1516701456.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:36.459Z,1516701456.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:36.491Z,1516701456.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:36.847Z,1516701456.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:36.862Z,1516701456.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:37.247Z,1516701457.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:37.262Z,1516701457.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:37.645Z,1516701457.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:37.679Z,1516701457.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:38.040Z,1516701458.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:38.067Z,1516701458.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:38.452Z,1516701458.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:38.470Z,1516701458.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:38.851Z,1516701458.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:38.866Z,1516701458.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:39.250Z,1516701459.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:39.269Z,1516701459.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:39.646Z,1516701459.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:39.661Z,1516701459.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:40.045Z,1516701460.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:40.060Z,1516701460.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:40.450Z,1516701460.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:40.473Z,1516701460.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:40.855Z,1516701460.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:40.870Z,1516701460.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:41.252Z,1516701461.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:41.267Z,1516701461.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:41.641Z,1516701461.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:41.664Z,1516701461.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:42.045Z,1516701462.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:42.060Z,1516701462.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:42.451Z,1516701462.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:42.473Z,1516701462.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:42.854Z,1516701462.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:42.869Z,1516701462.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:43.254Z,1516701463.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:43.269Z,1516701463.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:43.647Z,1516701463.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:43.681Z,1516701463.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:44.053Z,1516701464.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:44.069Z,1516701464.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:44.452Z,1516701464.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:44.479Z,1516701464.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:44.861Z,1516701464.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:44.876Z,1516701464.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:45.252Z,1516701465.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:45.274Z,1516701465.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:45.637Z,1516701465.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:45.669Z,1516701465.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:46.037Z,1516701466.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:46.073Z,1516701466.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:46.460Z,1516701466.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:46.476Z,1516701466.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:46.858Z,1516701466.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:46.882Z,1516701466.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:47.266Z,1516701467.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:47.281Z,1516701467.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:47.642Z,1516701467.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:47.670Z,1516701467.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:48.038Z,1516701468.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:48.069Z,1516701468.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:48.461Z,1516701468.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:48.477Z,1516701468.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:48.856Z,1516701468.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:48.889Z,1516701468.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:49.253Z,1516701469.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:49.289Z,1516701469.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:49.637Z,1516701469.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:49.654Z,1516701469.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:50.036Z,1516701470.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:50.054Z,1516701470.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:50.461Z,1516701470.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:50.489Z,1516701470.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:50.856Z,1516701470.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:50.888Z,1516701470.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:51.251Z,1516701471.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:51.268Z,1516701471.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:51.646Z,1516701471.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:51.661Z,1516701471.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:52.044Z,1516701472.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:52.064Z,1516701472.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:52.447Z,1516701472.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:52.463Z,1516701472.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:52.851Z,1516701472.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:52.866Z,1516701472.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:53.250Z,1516701473.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:53.265Z,1516701473.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:53.645Z,1516701473.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:53.665Z,1516701473.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:54.050Z,1516701474.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:54.065Z,1516701474.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:54.445Z,1516701474.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:54.460Z,1516701474.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:54.850Z,1516701474.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:54.865Z,1516701474.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:55.251Z,1516701475.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:55.266Z,1516701475.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:55.651Z,1516701475.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:55.672Z,1516701475.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:56.044Z,1516701476.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:56.059Z,1516701476.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:56.443Z,1516701476.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:56.465Z,1516701476.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:56.846Z,1516701476.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:56.861Z,1516701476.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:57.244Z,1516701477.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:57.259Z,1516701477.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:57.650Z,1516701477.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:57.665Z,1516701477.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:58.050Z,1516701478.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:58.064Z,1516701478.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:58.450Z,1516701478.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:58.469Z,1516701478.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:58.848Z,1516701478.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:58.863Z,1516701478.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:59.245Z,1516701479.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:59.259Z,1516701479.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:57:59.645Z,1516701479.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:57:59.665Z,1516701479.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:00.048Z,1516701480.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:00.069Z,1516701480.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:00.449Z,1516701480.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:00.463Z,1516701480.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:00.852Z,1516701480.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:00.867Z,1516701480.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:01.251Z,1516701481.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:01.266Z,1516701481.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:01.650Z,1516701481.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:01.665Z,1516701481.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:02.048Z,1516701482.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:02.063Z,1516701482.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:02.444Z,1516701482.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:02.459Z,1516701482.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:02.846Z,1516701482.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:02.860Z,1516701482.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:03.248Z,1516701483.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:03.263Z,1516701483.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:03.663Z,1516701483.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:03.695Z,1516701483.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:04.050Z,1516701484.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:04.064Z,1516701484.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:04.450Z,1516701484.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:04.465Z,1516701484.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:04.844Z,1516701484.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:04.865Z,1516701484.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:05.245Z,1516701485.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:05.260Z,1516701485.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:05.645Z,1516701485.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:05.665Z,1516701485.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:06.044Z,1516701486.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:06.062Z,1516701486.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:06.445Z,1516701486.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:06.459Z,1516701486.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:06.852Z,1516701486.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:06.867Z,1516701486.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:07.251Z,1516701487.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:07.266Z,1516701487.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:07.651Z,1516701487.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:07.665Z,1516701487.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:08.044Z,1516701488.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:08.060Z,1516701488.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:08.444Z,1516701488.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:08.459Z,1516701488.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:08.846Z,1516701488.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:08.860Z,1516701488.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:09.244Z,1516701489.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:09.259Z,1516701489.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:09.650Z,1516701489.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:09.669Z,1516701489.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:10.055Z,1516701490.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:10.069Z,1516701490.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:10.452Z,1516701490.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:10.467Z,1516701490.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:10.844Z,1516701490.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:10.859Z,1516701490.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:11.245Z,1516701491.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:11.260Z,1516701491.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:11.645Z,1516701491.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:11.660Z,1516701491.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:12.044Z,1516701492.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:12.062Z,1516701492.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:12.445Z,1516701492.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:12.460Z,1516701492.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:12.850Z,1516701492.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:12.868Z,1516701492.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:13.255Z,1516701493.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:13.270Z,1516701493.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:13.651Z,1516701493.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:13.665Z,1516701493.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:14.044Z,1516701494.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:14.065Z,1516701494.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:14.448Z,1516701494.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:14.463Z,1516701494.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:14.846Z,1516701494.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:14.860Z,1516701494.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:15.244Z,1516701495.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:15.260Z,1516701495.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:15.650Z,1516701495.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:15.665Z,1516701495.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:16.055Z,1516701496.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:16.069Z,1516701496.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:16.452Z,1516701496.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:16.467Z,1516701496.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:16.844Z,1516701496.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:16.865Z,1516701496.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:17.249Z,1516701497.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:17.263Z,1516701497.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:17.645Z,1516701497.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:17.665Z,1516701497.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:18.044Z,1516701498.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:18.062Z,1516701498.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:18.445Z,1516701498.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:18.460Z,1516701498.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:18.849Z,1516701498.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:18.869Z,1516701498.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:19.251Z,1516701499.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:19.266Z,1516701499.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:19.651Z,1516701499.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:19.672Z,1516701499.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:20.049Z,1516701500.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:20.064Z,1516701500.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:20.445Z,1516701500.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:20.460Z,1516701500.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:20.846Z,1516701500.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:20.861Z,1516701500.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:21.244Z,1516701501.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:21.259Z,1516701501.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:21.650Z,1516701501.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:21.673Z,1516701501.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:22.055Z,1516701502.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:22.069Z,1516701502.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:22.452Z,1516701502.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:22.467Z,1516701502.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:22.841Z,1516701502.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:22.863Z,1516701502.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:23.247Z,1516701503.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:23.262Z,1516701503.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:23.646Z,1516701503.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:23.661Z,1516701503.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:24.044Z,1516701504.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:24.071Z,1516701504.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:24.446Z,1516701504.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:24.473Z,1516701504.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:24.856Z,1516701504.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:24.871Z,1516701504.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:25.255Z,1516701505.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:25.277Z,1516701505.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:25.657Z,1516701505.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:25.673Z,1516701505.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:26.041Z,1516701506.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:26.067Z,1516701506.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:26.450Z,1516701506.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:26.466Z,1516701506.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:26.849Z,1516701506.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:26.864Z,1516701506.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:27.244Z,1516701507.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:27.265Z,1516701507.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:27.656Z,1516701507.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:27.672Z,1516701507.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:28.055Z,1516701508.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:28.070Z,1516701508.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:28.456Z,1516701508.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:28.471Z,1516701508.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:28.840Z,1516701508.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:28.873Z,1516701508.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:29.250Z,1516701509.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:29.266Z,1516701509.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:32.346Z,1516701512.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:32.362Z,1516701512.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:32.461Z,1516701512.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:32.508Z,1516701512.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:32.815Z,1516701512.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:32.837Z,1516701512.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:33.231Z,1516701513.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:33.261Z,1516701513.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:33.627Z,1516701513.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:33.659Z,1516701513.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:34.016Z,1516701514.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:34.031Z,1516701514.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:34.411Z,1516701514.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:34.437Z,1516701514.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:34.817Z,1516701514.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:34.837Z,1516701514.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:35.216Z,1516701515.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:35.236Z,1516701515.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:35.618Z,1516701515.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:35.633Z,1516701515.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:36.019Z,1516701516.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:36.034Z,1516701516.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:36.431Z,1516701516.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:36.446Z,1516701516.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:36.817Z,1516701516.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:36.832Z,1516701516.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:37.216Z,1516701517.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:37.230Z,1516701517.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:37.608Z,1516701517.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:37.633Z,1516701517.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:38.005Z,1516701518.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:38.032Z,1516701518.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:38.404Z,1516701518.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:38.441Z,1516701518.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:38.824Z,1516701518.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:38.839Z,1516701518.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:39.228Z,1516701519.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:39.242Z,1516701519.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:39.623Z,1516701519.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:39.638Z,1516701519.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:40.004Z,1516701520.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:40.030Z,1516701520.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:40.404Z,1516701520.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:40.436Z,1516701520.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:40.809Z,1516701520.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:40.836Z,1516701520.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:41.220Z,1516701521.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:41.241Z,1516701521.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:41.622Z,1516701521.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:41.645Z,1516701521.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:41.645Z,1516701521.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134 2018-01-23T09:58:41.645Z,1516701521.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T09:58:41.647Z,1516701521.647 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:41.647Z,1516701521.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 134 2018-01-23T09:58:41.647Z,1516701521.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T09:58:41.649Z,1516701521.649 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:41.649Z,1516701521.649 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134 2018-01-23T09:58:41.649Z,1516701521.649 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T09:58:41.661Z,1516701521.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T09:58:41.661Z,1516701521.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T09:58:41.661Z,1516701521.661 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T09:58:42.024Z,1516701522.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:42.056Z,1516701522.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T09:58:42.056Z,1516701522.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134 2018-01-23T09:58:42.056Z,1516701522.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T09:58:42.056Z,1516701522.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 134 2018-01-23T09:58:42.057Z,1516701522.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T09:58:42.057Z,1516701522.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134 2018-01-23T09:58:42.424Z,1516701522.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:42.453Z,1516701522.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T09:58:42.454Z,1516701522.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:58:42.454Z,1516701522.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:58:42.454Z,1516701522.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T09:58:42.455Z,1516701522.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:58:42.455Z,1516701522.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:58:42.456Z,1516701522.456 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T09:58:42.456Z,1516701522.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T09:58:42.456Z,1516701522.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T09:58:42.804Z,1516701522.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:42.840Z,1516701522.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T09:58:42.841Z,1516701522.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:43.205Z,1516701523.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:43.240Z,1516701523.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T09:58:43.241Z,1516701523.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:43.604Z,1516701523.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:43.648Z,1516701523.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T09:58:43.649Z,1516701523.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:44.009Z,1516701524.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:44.041Z,1516701524.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T09:58:44.041Z,1516701524.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:44.408Z,1516701524.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:44.441Z,1516701524.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T09:58:44.442Z,1516701524.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:44.815Z,1516701524.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:44.852Z,1516701524.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T09:58:44.853Z,1516701524.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:45.219Z,1516701525.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:45.245Z,1516701525.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T09:58:45.246Z,1516701525.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:45.615Z,1516701525.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:45.642Z,1516701525.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T09:58:45.643Z,1516701525.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:46.004Z,1516701526.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:46.040Z,1516701526.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T09:58:46.041Z,1516701526.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:46.408Z,1516701526.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:46.423Z,1516701526.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T09:58:46.424Z,1516701526.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:46.813Z,1516701526.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:46.828Z,1516701526.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T09:58:46.829Z,1516701526.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:47.212Z,1516701527.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:47.232Z,1516701527.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T09:58:47.233Z,1516701527.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:47.627Z,1516701527.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:47.659Z,1516701527.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T09:58:47.660Z,1516701527.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:48.027Z,1516701528.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:48.058Z,1516701528.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T09:58:48.059Z,1516701528.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:48.419Z,1516701528.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:48.434Z,1516701528.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T09:58:48.435Z,1516701528.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:48.812Z,1516701528.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:48.832Z,1516701528.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T09:58:48.833Z,1516701528.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:49.214Z,1516701529.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:49.232Z,1516701529.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T09:58:49.233Z,1516701529.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:49.613Z,1516701529.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:49.628Z,1516701529.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T09:58:49.629Z,1516701529.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:50.014Z,1516701530.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:50.028Z,1516701530.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T09:58:50.029Z,1516701530.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:50.412Z,1516701530.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:50.432Z,1516701530.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T09:58:50.433Z,1516701530.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:50.817Z,1516701530.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:50.836Z,1516701530.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T09:58:50.837Z,1516701530.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:51.219Z,1516701531.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:51.233Z,1516701531.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T09:58:51.234Z,1516701531.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:51.620Z,1516701531.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:51.634Z,1516701531.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T09:58:51.635Z,1516701531.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:52.012Z,1516701532.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:52.027Z,1516701532.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T09:58:52.028Z,1516701532.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:52.413Z,1516701532.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:52.427Z,1516701532.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T09:58:52.428Z,1516701532.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:52.812Z,1516701532.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:52.830Z,1516701532.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T09:58:52.831Z,1516701532.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:53.212Z,1516701533.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:53.227Z,1516701533.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T09:58:53.228Z,1516701533.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:53.618Z,1516701533.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:53.633Z,1516701533.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T09:58:53.634Z,1516701533.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:54.019Z,1516701534.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:54.034Z,1516701534.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T09:58:54.035Z,1516701534.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:54.418Z,1516701534.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:54.436Z,1516701534.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T09:58:54.437Z,1516701534.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:54.813Z,1516701534.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:54.827Z,1516701534.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T09:58:54.828Z,1516701534.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:55.212Z,1516701535.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:55.227Z,1516701535.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T09:58:55.228Z,1516701535.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:55.612Z,1516701535.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:55.627Z,1516701535.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T09:58:55.628Z,1516701535.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:56.014Z,1516701536.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:56.028Z,1516701536.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T09:58:56.029Z,1516701536.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:56.418Z,1516701536.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:56.433Z,1516701536.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T09:58:56.434Z,1516701536.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:56.819Z,1516701536.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:56.834Z,1516701536.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T09:58:56.835Z,1516701536.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:57.220Z,1516701537.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:57.331Z,1516701537.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T09:58:57.332Z,1516701537.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:57.623Z,1516701537.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:57.645Z,1516701537.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T09:58:57.646Z,1516701537.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:58.004Z,1516701538.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:58.040Z,1516701538.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T09:58:58.041Z,1516701538.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:58.404Z,1516701538.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:58.441Z,1516701538.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T09:58:58.442Z,1516701538.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:58.809Z,1516701538.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:58.845Z,1516701538.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T09:58:58.846Z,1516701538.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:59.212Z,1516701539.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:59.238Z,1516701539.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T09:58:59.240Z,1516701539.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:58:59.615Z,1516701539.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:58:59.650Z,1516701539.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T09:58:59.651Z,1516701539.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:00.027Z,1516701540.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:00.043Z,1516701540.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T09:59:00.044Z,1516701540.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:00.416Z,1516701540.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:00.449Z,1516701540.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T09:59:00.450Z,1516701540.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:00.806Z,1516701540.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:00.843Z,1516701540.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T09:59:00.844Z,1516701540.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:01.205Z,1516701541.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:01.233Z,1516701541.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T09:59:01.234Z,1516701541.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:01.614Z,1516701541.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:01.736Z,1516701541.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:02.007Z,1516701542.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:02.022Z,1516701542.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:02.410Z,1516701542.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:02.425Z,1516701542.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:02.825Z,1516701542.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:02.857Z,1516701542.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:03.224Z,1516701543.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:03.253Z,1516701543.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:03.621Z,1516701543.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:03.652Z,1516701543.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:04.009Z,1516701544.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:04.026Z,1516701544.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:04.412Z,1516701544.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:04.428Z,1516701544.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:04.810Z,1516701544.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:04.835Z,1516701544.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:05.206Z,1516701545.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:05.239Z,1516701545.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:05.624Z,1516701545.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:05.641Z,1516701545.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:06.027Z,1516701546.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:06.046Z,1516701546.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:06.445Z,1516701546.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:06.476Z,1516701546.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:06.804Z,1516701546.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:06.831Z,1516701546.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:07.202Z,1516701547.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:07.230Z,1516701547.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:07.604Z,1516701547.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:07.636Z,1516701547.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:08.009Z,1516701548.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:08.035Z,1516701548.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:08.408Z,1516701548.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:08.434Z,1516701548.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:08.831Z,1516701548.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:08.846Z,1516701548.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:09.227Z,1516701549.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:09.242Z,1516701549.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:09.620Z,1516701549.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:09.642Z,1516701549.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:10.004Z,1516701550.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:10.036Z,1516701550.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:10.404Z,1516701550.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:10.437Z,1516701550.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:10.805Z,1516701550.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:10.837Z,1516701550.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:11.208Z,1516701551.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:11.241Z,1516701551.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:11.615Z,1516701551.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:11.655Z,1516701551.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:12.015Z,1516701552.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:12.049Z,1516701552.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:12.427Z,1516701552.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:12.442Z,1516701552.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:12.805Z,1516701552.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:12.841Z,1516701552.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:13.202Z,1516701553.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:13.217Z,1516701553.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:13.615Z,1516701553.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:13.641Z,1516701553.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:14.019Z,1516701554.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:14.054Z,1516701554.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:14.415Z,1516701554.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:14.441Z,1516701554.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:14.805Z,1516701554.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:14.820Z,1516701554.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:15.204Z,1516701555.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:15.219Z,1516701555.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:15.615Z,1516701555.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:15.647Z,1516701555.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:16.027Z,1516701556.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:16.052Z,1516701556.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:16.427Z,1516701556.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:16.452Z,1516701556.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:16.813Z,1516701556.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:16.828Z,1516701556.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:17.210Z,1516701557.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:17.233Z,1516701557.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:17.627Z,1516701557.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:17.660Z,1516701557.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:18.015Z,1516701558.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:18.030Z,1516701558.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:18.427Z,1516701558.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:18.458Z,1516701558.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:18.813Z,1516701558.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:18.832Z,1516701558.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:19.213Z,1516701559.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:19.229Z,1516701559.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:19.615Z,1516701559.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:19.631Z,1516701559.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:20.019Z,1516701560.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:20.034Z,1516701560.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:20.428Z,1516701560.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:20.459Z,1516701560.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:20.810Z,1516701560.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:20.833Z,1516701560.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:21.213Z,1516701561.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:21.228Z,1516701561.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:21.617Z,1516701561.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:21.637Z,1516701561.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:22.023Z,1516701562.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:22.038Z,1516701562.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:22.418Z,1516701562.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:22.433Z,1516701562.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:22.812Z,1516701562.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:22.831Z,1516701562.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:23.212Z,1516701563.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:23.227Z,1516701563.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:23.618Z,1516701563.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:23.641Z,1516701563.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:24.017Z,1516701564.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:24.037Z,1516701564.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:24.417Z,1516701564.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:24.437Z,1516701564.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:24.814Z,1516701564.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:24.829Z,1516701564.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:25.209Z,1516701565.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:25.228Z,1516701565.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:25.618Z,1516701565.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:25.637Z,1516701565.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:26.023Z,1516701566.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:26.037Z,1516701566.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:26.431Z,1516701566.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:26.446Z,1516701566.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:26.812Z,1516701566.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:26.831Z,1516701566.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:27.210Z,1516701567.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:27.225Z,1516701567.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:27.622Z,1516701567.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:27.638Z,1516701567.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:28.026Z,1516701568.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:28.041Z,1516701568.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:28.044Z,1516701568.044 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T09:59:28.044Z,1516701568.044 [Default:CheckIn:C.Wait] Stopped 2018-01-23T09:59:28.044Z,1516701568.044 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T09:59:28.044Z,1516701568.044 [Default:CheckIn:D] Running Loop=1 2018-01-23T09:59:28.428Z,1516701568.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:28.442Z,1516701568.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:28.445Z,1516701568.445 [Default:CheckIn:D] Stopped 2018-01-23T09:59:28.446Z,1516701568.446 [Default:CheckIn:E] Running Loop=1 2018-01-23T09:59:28.805Z,1516701568.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:28.837Z,1516701568.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:28.840Z,1516701568.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 401.606413 min 2018-01-23T09:59:28.840Z,1516701568.840 [Default:CheckIn:E] Stopped 2018-01-23T09:59:28.840Z,1516701568.840 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T09:59:28.840Z,1516701568.840 [Default:CheckIn] Stopped 2018-01-23T09:59:28.841Z,1516701568.841 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T09:59:28.841Z,1516701568.841 [Default:CheckIn](INFO): Running loop #40 2018-01-23T09:59:28.841Z,1516701568.841 [Default:CheckIn] Running Loop=40 2018-01-23T09:59:28.841Z,1516701568.841 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T09:59:28.841Z,1516701568.841 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T09:59:29.205Z,1516701569.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:29.237Z,1516701569.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:29.624Z,1516701569.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:29.642Z,1516701569.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:32.713Z,1516701572.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:32.733Z,1516701572.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:32.843Z,1516701572.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:32.858Z,1516701572.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:33.189Z,1516701573.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:33.204Z,1516701573.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:33.593Z,1516701573.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:33.607Z,1516701573.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:33.988Z,1516701573.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:34.008Z,1516701574.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:34.388Z,1516701574.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:34.407Z,1516701574.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:34.798Z,1516701574.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:34.816Z,1516701574.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:35.196Z,1516701575.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:35.217Z,1516701575.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:35.596Z,1516701575.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:35.611Z,1516701575.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:35.988Z,1516701575.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:36.003Z,1516701576.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:36.384Z,1516701576.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:36.409Z,1516701576.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:36.794Z,1516701576.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:36.809Z,1516701576.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:37.189Z,1516701577.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:37.204Z,1516701577.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:37.581Z,1516701577.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:37.609Z,1516701577.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:37.000Z,1516701578.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:38.021Z,1516701578.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:38.401Z,1516701578.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:38.416Z,1516701578.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:38.795Z,1516701578.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:38.825Z,1516701578.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:39.190Z,1516701579.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:39.206Z,1516701579.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:39.576Z,1516701579.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:39.612Z,1516701579.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:39.978Z,1516701579.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:40.006Z,1516701580.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:40.393Z,1516701580.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:40.410Z,1516701580.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:40.793Z,1516701580.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:40.823Z,1516701580.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:41.199Z,1516701581.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:41.218Z,1516701581.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:41.587Z,1516701581.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:41.622Z,1516701581.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:41.984Z,1516701581.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:42.020Z,1516701582.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:42.381Z,1516701582.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:42.417Z,1516701582.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:42.777Z,1516701582.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:42.813Z,1516701582.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:43.177Z,1516701583.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:43.196Z,1516701583.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:43.578Z,1516701583.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:43.593Z,1516701583.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:43.995Z,1516701583.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:44.026Z,1516701584.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:44.399Z,1516701584.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:44.432Z,1516701584.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:44.788Z,1516701584.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:44.802Z,1516701584.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:45.185Z,1516701585.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:45.201Z,1516701585.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:45.584Z,1516701585.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:45.600Z,1516701585.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:45.982Z,1516701585.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:46.009Z,1516701586.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:46.390Z,1516701586.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:46.414Z,1516701586.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:46.803Z,1516701586.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:46.818Z,1516701586.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:47.188Z,1516701587.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:47.211Z,1516701587.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:47.593Z,1516701587.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:47.608Z,1516701587.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:47.985Z,1516701587.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:47.000Z,1516701588.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:48.388Z,1516701588.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:48.403Z,1516701588.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:48.793Z,1516701588.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:48.809Z,1516701588.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:49.186Z,1516701589.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:49.200Z,1516701589.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:49.580Z,1516701589.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:49.601Z,1516701589.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:49.994Z,1516701589.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:50.009Z,1516701590.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:50.398Z,1516701590.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:50.413Z,1516701590.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:50.790Z,1516701590.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:50.805Z,1516701590.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:51.176Z,1516701591.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:51.209Z,1516701591.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:51.588Z,1516701591.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:51.603Z,1516701591.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:51.984Z,1516701591.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:52.016Z,1516701592.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:52.376Z,1516701592.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:52.413Z,1516701592.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:52.800Z,1516701592.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:52.815Z,1516701592.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:53.192Z,1516701593.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:53.213Z,1516701593.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:53.606Z,1516701593.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:53.621Z,1516701593.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:53.992Z,1516701593.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:54.007Z,1516701594.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:54.381Z,1516701594.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:54.407Z,1516701594.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:54.779Z,1516701594.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:54.813Z,1516701594.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:55.182Z,1516701595.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:55.208Z,1516701595.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:55.578Z,1516701595.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:55.606Z,1516701595.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:55.996Z,1516701595.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:56.010Z,1516701596.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:56.407Z,1516701596.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:56.422Z,1516701596.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:56.792Z,1516701596.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:56.814Z,1516701596.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:57.197Z,1516701597.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:57.212Z,1516701597.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:57.576Z,1516701597.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:57.609Z,1516701597.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:57.979Z,1516701597.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:58.014Z,1516701598.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:58.379Z,1516701598.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:58.417Z,1516701598.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:58.804Z,1516701598.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:58.819Z,1516701598.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:59.195Z,1516701599.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:59.214Z,1516701599.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:59.593Z,1516701599.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T09:59:59.615Z,1516701599.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T09:59:59.979Z,1516701599.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:00.013Z,1516701600.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:00.384Z,1516701600.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:00.411Z,1516701600.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:00.780Z,1516701600.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:00.806Z,1516701600.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:01.179Z,1516701601.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:01.207Z,1516701601.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:01.576Z,1516701601.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:01.604Z,1516701601.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:02.003Z,1516701602.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:02.018Z,1516701602.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:02.403Z,1516701602.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:02.418Z,1516701602.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:02.790Z,1516701602.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:02.825Z,1516701602.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:03.179Z,1516701603.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:03.206Z,1516701603.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:03.582Z,1516701603.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:03.620Z,1516701603.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:03.981Z,1516701603.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:04.009Z,1516701604.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:04.376Z,1516701604.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:04.424Z,1516701604.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:04.789Z,1516701604.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:04.796Z,1516701604.796 [PNI_TCM](ERROR): CRC does not match. Expected:0x59705 got:0x49717 2018-01-23T10:00:04.824Z,1516701604.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:05.188Z,1516701605.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:05.219Z,1516701605.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:05.596Z,1516701605.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:05.621Z,1516701605.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:05.981Z,1516701605.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:05.999Z,1516701605.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:06.384Z,1516701606.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:06.402Z,1516701606.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:06.784Z,1516701606.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:06.809Z,1516701606.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:07.186Z,1516701607.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:07.201Z,1516701607.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:07.580Z,1516701607.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:07.626Z,1516701607.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:07.990Z,1516701607.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:07.997Z,1516701607.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x12359 got:0x7234 2018-01-23T10:00:08.036Z,1516701608.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:08.391Z,1516701608.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:08.406Z,1516701608.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:08.788Z,1516701608.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:08.803Z,1516701608.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:09.184Z,1516701609.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:09.225Z,1516701609.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:09.587Z,1516701609.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:09.594Z,1516701609.594 [PNI_TCM](ERROR): CRC does not match. Expected:0x2372 got:0x876 2018-01-23T10:00:09.613Z,1516701609.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:09.984Z,1516701609.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:10.008Z,1516701610.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:10.385Z,1516701610.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:10.404Z,1516701610.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:10.799Z,1516701610.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:10.813Z,1516701610.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:11.196Z,1516701611.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:11.225Z,1516701611.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:11.600Z,1516701611.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:11.621Z,1516701611.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:11.992Z,1516701611.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:12.007Z,1516701612.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:12.390Z,1516701612.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:12.429Z,1516701612.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:12.793Z,1516701612.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:12.808Z,1516701612.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:13.187Z,1516701613.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:13.215Z,1516701613.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:13.576Z,1516701613.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:13.613Z,1516701613.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:14.006Z,1516701614.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:14.029Z,1516701614.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:14.406Z,1516701614.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:14.421Z,1516701614.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:14.792Z,1516701614.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:14.812Z,1516701614.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:15.179Z,1516701615.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:15.218Z,1516701615.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:15.577Z,1516701615.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:15.621Z,1516701615.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:15.977Z,1516701615.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:15.999Z,1516701615.999 [PNI_TCM](ERROR): CRC does not match. Expected:0x28821 got:0x61343 2018-01-23T10:00:16.017Z,1516701616.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:16.397Z,1516701616.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:16.418Z,1516701616.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:16.798Z,1516701616.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:16.813Z,1516701616.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:17.192Z,1516701617.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:17.221Z,1516701617.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:17.596Z,1516701617.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:17.612Z,1516701617.612 [PNI_TCM](ERROR): CRC does not match. Expected:0x15140 got:0x25669 2018-01-23T10:00:17.651Z,1516701617.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:17.977Z,1516701617.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:18.008Z,1516701618.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:18.378Z,1516701618.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:18.418Z,1516701618.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:18.776Z,1516701618.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:18.824Z,1516701618.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:19.181Z,1516701619.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:19.212Z,1516701619.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:19.574Z,1516701619.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:19.613Z,1516701619.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:20.002Z,1516701620.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:20.009Z,1516701620.009 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T10:00:20.037Z,1516701620.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:20.402Z,1516701620.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:20.430Z,1516701620.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:20.787Z,1516701620.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:20.806Z,1516701620.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x16116 got:0x16840 2018-01-23T10:00:20.825Z,1516701620.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:21.176Z,1516701621.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:21.220Z,1516701621.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:21.577Z,1516701621.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:21.606Z,1516701621.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:21.977Z,1516701621.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:22.021Z,1516701622.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:22.376Z,1516701622.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:22.413Z,1516701622.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:22.793Z,1516701622.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:22.821Z,1516701622.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:23.188Z,1516701623.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:23.229Z,1516701623.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:23.596Z,1516701623.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:23.644Z,1516701623.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:23.984Z,1516701623.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:24.021Z,1516701624.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:24.384Z,1516701624.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:24.419Z,1516701624.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:24.786Z,1516701624.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:24.825Z,1516701624.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:25.184Z,1516701625.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:25.209Z,1516701625.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:25.580Z,1516701625.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:25.600Z,1516701625.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:26.006Z,1516701626.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:26.037Z,1516701626.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:26.394Z,1516701626.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:26.408Z,1516701626.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:26.789Z,1516701626.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:26.832Z,1516701626.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:27.184Z,1516701627.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:27.201Z,1516701627.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:27.585Z,1516701627.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:27.605Z,1516701627.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:27.981Z,1516701627.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:28.007Z,1516701628.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:28.384Z,1516701628.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:28.399Z,1516701628.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:28.790Z,1516701628.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:28.816Z,1516701628.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:29.190Z,1516701629.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:29.209Z,1516701629.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:29.591Z,1516701629.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:29.608Z,1516701629.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:29.986Z,1516701629.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:30.013Z,1516701630.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:33.091Z,1516701633.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:33.107Z,1516701633.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:33.213Z,1516701633.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:33.242Z,1516701633.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:33.579Z,1516701633.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:33.601Z,1516701633.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:33.991Z,1516701633.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:34.008Z,1516701634.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:34.383Z,1516701634.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:34.401Z,1516701634.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:34.772Z,1516701634.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:34.798Z,1516701634.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:35.165Z,1516701635.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:35.197Z,1516701635.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:35.562Z,1516701635.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:35.586Z,1516701635.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:35.976Z,1516701635.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:36.013Z,1516701636.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:36.389Z,1516701636.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:36.417Z,1516701636.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:36.775Z,1516701636.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:36.809Z,1516701636.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:37.164Z,1516701637.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:37.201Z,1516701637.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:37.564Z,1516701637.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:37.602Z,1516701637.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:37.969Z,1516701637.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:38.004Z,1516701638.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:38.364Z,1516701638.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:38.401Z,1516701638.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:38.775Z,1516701638.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:38.810Z,1516701638.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:39.175Z,1516701639.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:39.219Z,1516701639.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:39.579Z,1516701639.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:39.605Z,1516701639.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:39.965Z,1516701639.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:39.000Z,1516701640.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:40.372Z,1516701640.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:40.387Z,1516701640.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:40.772Z,1516701640.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:40.795Z,1516701640.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:41.174Z,1516701641.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:41.188Z,1516701641.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:41.568Z,1516701641.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:41.588Z,1516701641.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:41.981Z,1516701641.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:42.001Z,1516701642.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:42.382Z,1516701642.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:42.397Z,1516701642.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:42.779Z,1516701642.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:42.810Z,1516701642.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:43.168Z,1516701643.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:43.190Z,1516701643.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:43.573Z,1516701643.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:43.592Z,1516701643.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:43.977Z,1516701643.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:43.993Z,1516701643.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:44.380Z,1516701644.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:44.401Z,1516701644.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:44.783Z,1516701644.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:44.798Z,1516701644.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:45.182Z,1516701645.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:45.198Z,1516701645.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:45.582Z,1516701645.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:45.598Z,1516701645.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:45.964Z,1516701645.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:46.001Z,1516701646.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:46.364Z,1516701646.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:46.398Z,1516701646.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:46.763Z,1516701646.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:46.797Z,1516701646.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:47.165Z,1516701647.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:47.202Z,1516701647.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:47.562Z,1516701647.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:47.585Z,1516701647.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:47.987Z,1516701647.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:48.003Z,1516701648.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:48.389Z,1516701648.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:48.404Z,1516701648.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:48.775Z,1516701648.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:48.811Z,1516701648.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:49.165Z,1516701649.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:49.201Z,1516701649.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:49.604Z,1516701649.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:49.660Z,1516701649.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:49.989Z,1516701649.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:50.012Z,1516701650.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:50.370Z,1516701650.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:50.386Z,1516701650.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:50.790Z,1516701650.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:50.848Z,1516701650.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:51.182Z,1516701651.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:51.197Z,1516701651.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:51.602Z,1516701651.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:51.643Z,1516701651.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:51.980Z,1516701651.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:52.011Z,1516701652.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:52.370Z,1516701652.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:52.406Z,1516701652.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:52.770Z,1516701652.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:52.815Z,1516701652.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:53.167Z,1516701653.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:53.217Z,1516701653.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:53.571Z,1516701653.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:53.586Z,1516701653.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:53.981Z,1516701653.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:54.013Z,1516701654.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:54.394Z,1516701654.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:54.461Z,1516701654.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:54.790Z,1516701654.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:54.816Z,1516701654.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:55.170Z,1516701655.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:55.209Z,1516701655.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:55.571Z,1516701655.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:55.629Z,1516701655.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:55.972Z,1516701655.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:56.022Z,1516701656.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:56.371Z,1516701656.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:56.420Z,1516701656.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:56.790Z,1516701656.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:56.817Z,1516701656.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:57.190Z,1516701657.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:57.243Z,1516701657.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:57.590Z,1516701657.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:57.629Z,1516701657.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:57.967Z,1516701657.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:58.031Z,1516701658.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:58.366Z,1516701658.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:58.401Z,1516701658.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:58.790Z,1516701658.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:58.806Z,1516701658.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:59.190Z,1516701659.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:59.213Z,1516701659.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:59.585Z,1516701659.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:00:59.610Z,1516701659.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:00:59.998Z,1516701659.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:00.025Z,1516701660.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:00.373Z,1516701660.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:00.412Z,1516701660.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:00.780Z,1516701660.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:00.804Z,1516701660.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:01.188Z,1516701661.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:01.233Z,1516701661.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:01.584Z,1516701661.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:01.609Z,1516701661.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:01.979Z,1516701661.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:02.037Z,1516701662.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:02.381Z,1516701662.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:02.441Z,1516701662.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:02.817Z,1516701662.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:02.832Z,1516701662.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:03.182Z,1516701663.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:03.198Z,1516701663.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:03.583Z,1516701663.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:03.598Z,1516701663.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:03.974Z,1516701663.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:03.988Z,1516701663.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:04.368Z,1516701664.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:04.391Z,1516701664.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:04.783Z,1516701664.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:04.798Z,1516701664.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:05.186Z,1516701665.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:05.209Z,1516701665.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:05.582Z,1516701665.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:05.597Z,1516701665.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:05.971Z,1516701665.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:05.991Z,1516701665.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:06.374Z,1516701666.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:06.396Z,1516701666.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:06.782Z,1516701666.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:06.798Z,1516701666.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:07.186Z,1516701667.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:07.201Z,1516701667.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:07.584Z,1516701667.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:07.598Z,1516701667.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:07.969Z,1516701667.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:07.992Z,1516701667.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:08.367Z,1516701668.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:08.399Z,1516701668.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:08.783Z,1516701668.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:08.798Z,1516701668.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:09.182Z,1516701669.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:09.197Z,1516701669.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:09.582Z,1516701669.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:09.604Z,1516701669.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:09.974Z,1516701669.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:09.989Z,1516701669.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:10.376Z,1516701670.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:10.397Z,1516701670.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:10.782Z,1516701670.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:10.798Z,1516701670.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:11.186Z,1516701671.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:11.209Z,1516701671.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:11.580Z,1516701671.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:11.607Z,1516701671.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:11.969Z,1516701671.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:11.995Z,1516701671.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:12.363Z,1516701672.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:12.390Z,1516701672.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:12.784Z,1516701672.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:12.799Z,1516701672.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:13.186Z,1516701673.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:13.201Z,1516701673.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:13.578Z,1516701673.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:13.617Z,1516701673.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:13.965Z,1516701673.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:13.991Z,1516701673.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:14.364Z,1516701674.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:14.397Z,1516701674.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:14.782Z,1516701674.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:14.802Z,1516701674.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:15.181Z,1516701675.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:15.207Z,1516701675.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:15.584Z,1516701675.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:15.598Z,1516701675.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:15.965Z,1516701675.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:16.000Z,1516701676.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:16.364Z,1516701676.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:16.394Z,1516701676.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:16.782Z,1516701676.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:16.805Z,1516701676.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:17.192Z,1516701677.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:17.213Z,1516701677.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:17.580Z,1516701677.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:17.610Z,1516701677.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:17.965Z,1516701677.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:17.997Z,1516701677.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:18.365Z,1516701678.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:18.398Z,1516701678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:18.782Z,1516701678.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:18.804Z,1516701678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:19.187Z,1516701679.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:19.202Z,1516701679.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:19.579Z,1516701679.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:19.609Z,1516701679.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:19.965Z,1516701679.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:19.997Z,1516701679.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:20.364Z,1516701680.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:20.390Z,1516701680.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:20.784Z,1516701680.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:20.811Z,1516701680.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:21.183Z,1516701681.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:21.201Z,1516701681.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:21.591Z,1516701681.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:21.606Z,1516701681.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:21.966Z,1516701681.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:22.001Z,1516701682.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:22.365Z,1516701682.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:22.396Z,1516701682.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:22.780Z,1516701682.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:22.802Z,1516701682.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:23.186Z,1516701683.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:23.210Z,1516701683.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:23.584Z,1516701683.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:23.599Z,1516701683.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:23.965Z,1516701683.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:24.000Z,1516701684.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:24.365Z,1516701684.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:24.401Z,1516701684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:24.775Z,1516701684.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:24.811Z,1516701684.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:25.183Z,1516701685.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:25.205Z,1516701685.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:25.575Z,1516701685.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:25.613Z,1516701685.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:25.962Z,1516701685.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:25.978Z,1516701685.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:26.377Z,1516701686.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:26.437Z,1516701686.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:26.772Z,1516701686.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:26.809Z,1516701686.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:27.183Z,1516701687.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:27.216Z,1516701687.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:27.605Z,1516701687.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:27.625Z,1516701687.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:27.983Z,1516701687.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:28.010Z,1516701688.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:28.371Z,1516701688.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:28.386Z,1516701688.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:28.770Z,1516701688.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:28.798Z,1516701688.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:29.232Z,1516701689.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:29.269Z,1516701689.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:29.568Z,1516701689.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:29.590Z,1516701689.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:29.977Z,1516701689.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:29.993Z,1516701689.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:30.389Z,1516701690.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:30.409Z,1516701690.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:33.592Z,1516701693.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:33.608Z,1516701693.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:33.716Z,1516701693.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:33.745Z,1516701693.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:34.081Z,1516701694.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:34.133Z,1516701694.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:34.490Z,1516701694.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:34.505Z,1516701694.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:34.890Z,1516701694.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:34.914Z,1516701694.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:35.297Z,1516701695.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:35.313Z,1516701695.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:35.695Z,1516701695.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:35.733Z,1516701695.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:36.080Z,1516701696.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:36.101Z,1516701696.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:36.485Z,1516701696.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:36.500Z,1516701696.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:36.890Z,1516701696.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:36.909Z,1516701696.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:37.293Z,1516701697.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:37.309Z,1516701697.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:37.681Z,1516701697.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:37.713Z,1516701697.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:38.099Z,1516701698.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:38.118Z,1516701698.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:38.501Z,1516701698.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:38.518Z,1516701698.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:38.899Z,1516701698.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:38.941Z,1516701698.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:39.287Z,1516701699.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:39.309Z,1516701699.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:39.685Z,1516701699.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:39.701Z,1516701699.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:40.086Z,1516701700.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:40.113Z,1516701700.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:40.490Z,1516701700.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:40.505Z,1516701700.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:40.857Z,1516701700.857 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:01:40.858Z,1516701700.858 [NAL9602] Data Fault, FailCount= 2 2018-01-23T10:01:40.858Z,1516701700.858 [NAL9602](ERROR): Data Fault 2018-01-23T10:01:40.874Z,1516701700.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:40.901Z,1516701700.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:40.928Z,1516701700.928 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:01:41.260Z,1516701701.260 [NAL9602](INFO): Powering down 2018-01-23T10:01:41.277Z,1516701701.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:41.314Z,1516701701.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:41.676Z,1516701701.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:41.712Z,1516701701.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:42.076Z,1516701702.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:42.099Z,1516701702.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:42.121Z,1516701702.121 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:01:42.121Z,1516701702.121 [NAL9602] No Fault, FailCount= 2 2018-01-23T10:01:42.476Z,1516701702.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:42.517Z,1516701702.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:42.517Z,1516701702.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135 2018-01-23T10:01:42.517Z,1516701702.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:01:42.523Z,1516701702.523 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:42.523Z,1516701702.523 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 135 2018-01-23T10:01:42.523Z,1516701702.523 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:01:42.526Z,1516701702.526 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:42.526Z,1516701702.526 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135 2018-01-23T10:01:42.526Z,1516701702.526 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:01:42.563Z,1516701702.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:01:42.563Z,1516701702.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:01:42.564Z,1516701702.564 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:01:42.887Z,1516701702.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:42.928Z,1516701702.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:01:42.928Z,1516701702.928 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135 2018-01-23T10:01:42.929Z,1516701702.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:01:42.929Z,1516701702.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 135 2018-01-23T10:01:42.929Z,1516701702.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:01:42.929Z,1516701702.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135 2018-01-23T10:01:43.282Z,1516701703.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:43.296Z,1516701703.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:01:43.297Z,1516701703.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:01:43.297Z,1516701703.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:01:43.297Z,1516701703.297 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:01:43.298Z,1516701703.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:01:43.298Z,1516701703.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:01:43.298Z,1516701703.298 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:01:43.299Z,1516701703.299 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:01:43.299Z,1516701703.299 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:01:43.678Z,1516701703.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:43.701Z,1516701703.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:01:43.702Z,1516701703.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:44.084Z,1516701704.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:44.098Z,1516701704.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:01:44.099Z,1516701704.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:44.485Z,1516701704.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:44.500Z,1516701704.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:01:44.501Z,1516701704.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:44.883Z,1516701704.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:44.908Z,1516701704.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:01:44.909Z,1516701704.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:45.292Z,1516701705.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:45.306Z,1516701705.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:01:45.308Z,1516701705.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:45.683Z,1516701705.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:45.742Z,1516701705.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:01:45.744Z,1516701705.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:46.081Z,1516701706.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:46.103Z,1516701706.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:01:46.104Z,1516701706.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:46.490Z,1516701706.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:46.505Z,1516701706.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:01:46.505Z,1516701706.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:46.879Z,1516701706.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:46.905Z,1516701706.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:01:46.906Z,1516701706.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:47.277Z,1516701707.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:47.313Z,1516701707.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:01:47.314Z,1516701707.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:47.677Z,1516701707.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:47.708Z,1516701707.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:01:47.709Z,1516701707.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:48.076Z,1516701708.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:48.112Z,1516701708.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:01:48.113Z,1516701708.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:48.480Z,1516701708.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:48.507Z,1516701708.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:01:48.508Z,1516701708.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:48.876Z,1516701708.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:48.910Z,1516701708.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:01:48.911Z,1516701708.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:49.276Z,1516701709.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:49.311Z,1516701709.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:01:49.312Z,1516701709.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:49.676Z,1516701709.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:49.719Z,1516701709.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:01:49.720Z,1516701709.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:50.080Z,1516701710.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:50.114Z,1516701710.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:01:50.115Z,1516701710.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:50.476Z,1516701710.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:50.501Z,1516701710.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:01:50.502Z,1516701710.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:50.876Z,1516701710.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:50.920Z,1516701710.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:01:50.921Z,1516701710.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:51.276Z,1516701711.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:51.290Z,1516701711.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:01:51.291Z,1516701711.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:51.676Z,1516701711.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:51.691Z,1516701711.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:01:51.692Z,1516701711.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:52.080Z,1516701712.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:52.100Z,1516701712.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:01:52.101Z,1516701712.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:52.484Z,1516701712.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:52.498Z,1516701712.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:01:52.499Z,1516701712.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:52.884Z,1516701712.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:52.898Z,1516701712.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:01:52.899Z,1516701712.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:53.283Z,1516701713.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:53.297Z,1516701713.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:01:53.298Z,1516701713.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:53.683Z,1516701713.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:53.697Z,1516701713.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:01:53.698Z,1516701713.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:54.083Z,1516701714.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:54.098Z,1516701714.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:01:54.099Z,1516701714.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:54.483Z,1516701714.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:54.498Z,1516701714.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:01:54.499Z,1516701714.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:54.883Z,1516701714.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:54.897Z,1516701714.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:01:54.898Z,1516701714.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:55.283Z,1516701715.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:55.298Z,1516701715.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:01:55.299Z,1516701715.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:55.683Z,1516701715.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:55.704Z,1516701715.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:01:55.705Z,1516701715.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:56.085Z,1516701716.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:56.099Z,1516701716.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:01:56.100Z,1516701716.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:56.485Z,1516701716.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:56.500Z,1516701716.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:01:56.500Z,1516701716.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:56.883Z,1516701716.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:56.904Z,1516701716.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:01:56.905Z,1516701716.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:57.284Z,1516701717.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:57.298Z,1516701717.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:01:57.299Z,1516701717.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:57.683Z,1516701717.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:57.698Z,1516701717.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:01:57.699Z,1516701717.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:58.084Z,1516701718.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:58.098Z,1516701718.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:01:58.099Z,1516701718.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:58.484Z,1516701718.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:58.498Z,1516701718.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:01:58.499Z,1516701718.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:58.884Z,1516701718.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:58.899Z,1516701718.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:01:58.900Z,1516701718.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:59.284Z,1516701719.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:59.298Z,1516701719.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:01:59.299Z,1516701719.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:01:59.684Z,1516701719.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:01:59.698Z,1516701719.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:01:59.699Z,1516701719.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:00.081Z,1516701720.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:00.096Z,1516701720.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:02:00.097Z,1516701720.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:00.484Z,1516701720.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:00.498Z,1516701720.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:02:00.499Z,1516701720.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:00.884Z,1516701720.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:00.898Z,1516701720.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:02:00.899Z,1516701720.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:01.284Z,1516701721.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:01.298Z,1516701721.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:02:01.300Z,1516701721.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:01.684Z,1516701721.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:01.698Z,1516701721.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:02:01.699Z,1516701721.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:02.084Z,1516701722.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:02.098Z,1516701722.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:02:02.099Z,1516701722.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:02.484Z,1516701722.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:02.499Z,1516701722.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:02:02.500Z,1516701722.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:02.884Z,1516701722.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:02.898Z,1516701722.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:03.284Z,1516701723.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:03.298Z,1516701723.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:03.688Z,1516701723.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:03.704Z,1516701723.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:04.084Z,1516701724.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:04.098Z,1516701724.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:04.484Z,1516701724.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:04.498Z,1516701724.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:04.884Z,1516701724.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:04.899Z,1516701724.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:05.284Z,1516701725.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:05.298Z,1516701725.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:05.689Z,1516701725.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:05.703Z,1516701725.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:06.081Z,1516701726.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:06.096Z,1516701726.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:06.483Z,1516701726.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:06.498Z,1516701726.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:06.876Z,1516701726.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:06.896Z,1516701726.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:07.287Z,1516701727.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:07.315Z,1516701727.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:07.676Z,1516701727.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:07.710Z,1516701727.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:08.075Z,1516701728.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:08.104Z,1516701728.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:08.476Z,1516701728.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:08.502Z,1516701728.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:08.876Z,1516701728.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:08.910Z,1516701728.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:09.276Z,1516701729.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:09.318Z,1516701729.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:09.676Z,1516701729.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:09.709Z,1516701729.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:10.076Z,1516701730.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:10.110Z,1516701730.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:10.475Z,1516701730.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:10.518Z,1516701730.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:10.873Z,1516701730.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:10.909Z,1516701730.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:11.264Z,1516701731.264 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:02:11.281Z,1516701731.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:11.311Z,1516701731.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:11.680Z,1516701731.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:11.706Z,1516701731.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:12.076Z,1516701732.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:12.107Z,1516701732.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:12.476Z,1516701732.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:12.509Z,1516701732.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:12.876Z,1516701732.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:12.909Z,1516701732.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:13.276Z,1516701733.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:13.303Z,1516701733.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:13.676Z,1516701733.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:13.714Z,1516701733.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:14.076Z,1516701734.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:14.113Z,1516701734.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:14.480Z,1516701734.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:14.495Z,1516701734.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:14.884Z,1516701734.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:14.898Z,1516701734.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:15.278Z,1516701735.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:15.293Z,1516701735.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:15.684Z,1516701735.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:15.699Z,1516701735.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:16.088Z,1516701736.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:16.102Z,1516701736.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:16.489Z,1516701736.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:16.509Z,1516701736.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:16.885Z,1516701736.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:16.900Z,1516701736.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:17.286Z,1516701737.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:17.305Z,1516701737.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:17.687Z,1516701737.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:17.702Z,1516701737.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:18.084Z,1516701738.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:18.100Z,1516701738.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:18.484Z,1516701738.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:18.499Z,1516701738.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:18.883Z,1516701738.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:18.906Z,1516701738.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:19.286Z,1516701739.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:19.301Z,1516701739.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:19.685Z,1516701739.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:19.700Z,1516701739.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:20.083Z,1516701740.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:20.098Z,1516701740.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:20.485Z,1516701740.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:20.500Z,1516701740.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:20.885Z,1516701740.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:20.901Z,1516701740.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:21.284Z,1516701741.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:21.300Z,1516701741.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:21.685Z,1516701741.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:21.701Z,1516701741.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:22.091Z,1516701742.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:22.106Z,1516701742.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:22.460Z,1516701742.460 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:02:22.489Z,1516701742.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:22.505Z,1516701742.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:22.884Z,1516701742.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:22.899Z,1516701742.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:23.292Z,1516701743.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:23.313Z,1516701743.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:23.695Z,1516701743.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:23.710Z,1516701743.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:24.103Z,1516701744.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:24.118Z,1516701744.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:24.491Z,1516701744.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:24.506Z,1516701744.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:24.880Z,1516701744.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:24.901Z,1516701744.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:25.286Z,1516701745.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:25.301Z,1516701745.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:25.686Z,1516701745.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:25.708Z,1516701745.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:26.093Z,1516701746.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:26.121Z,1516701746.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:26.499Z,1516701746.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:26.514Z,1516701746.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:26.896Z,1516701746.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:26.916Z,1516701746.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:27.274Z,1516701747.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:27.302Z,1516701747.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:27.685Z,1516701747.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:27.701Z,1516701747.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:28.085Z,1516701748.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:28.101Z,1516701748.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:28.484Z,1516701748.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:28.504Z,1516701748.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:28.885Z,1516701748.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:28.900Z,1516701748.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:29.295Z,1516701749.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:29.311Z,1516701749.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:29.698Z,1516701749.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:29.717Z,1516701749.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:30.095Z,1516701750.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:30.110Z,1516701750.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:30.486Z,1516701750.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:30.501Z,1516701750.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:33.585Z,1516701753.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:33.605Z,1516701753.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:33.710Z,1516701753.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:33.742Z,1516701753.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:34.067Z,1516701754.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:34.082Z,1516701754.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:34.475Z,1516701754.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:34.508Z,1516701754.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:34.864Z,1516701754.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:34.879Z,1516701754.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:35.256Z,1516701755.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:35.273Z,1516701755.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:35.658Z,1516701755.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:35.672Z,1516701755.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:36.053Z,1516701756.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:36.074Z,1516701756.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:36.456Z,1516701756.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:36.475Z,1516701756.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:36.857Z,1516701756.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:36.872Z,1516701756.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:37.264Z,1516701757.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:37.279Z,1516701757.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:37.663Z,1516701757.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:37.678Z,1516701757.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:38.063Z,1516701758.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:38.077Z,1516701758.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:38.460Z,1516701758.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:38.475Z,1516701758.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:38.853Z,1516701758.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:38.880Z,1516701758.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:39.262Z,1516701759.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:39.277Z,1516701759.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:39.661Z,1516701759.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:39.681Z,1516701759.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:40.066Z,1516701760.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:40.081Z,1516701760.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:40.470Z,1516701760.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:40.485Z,1516701760.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:40.866Z,1516701760.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:40.882Z,1516701760.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:41.257Z,1516701761.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:41.277Z,1516701761.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:41.658Z,1516701761.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:41.676Z,1516701761.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:42.050Z,1516701762.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:42.065Z,1516701762.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:42.456Z,1516701762.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:42.487Z,1516701762.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:42.849Z,1516701762.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:42.875Z,1516701762.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:43.274Z,1516701763.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:43.289Z,1516701763.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:43.670Z,1516701763.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:43.685Z,1516701763.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:44.066Z,1516701764.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:44.096Z,1516701764.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:44.461Z,1516701764.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:44.476Z,1516701764.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:44.849Z,1516701764.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:44.881Z,1516701764.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:45.249Z,1516701765.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:45.288Z,1516701765.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:45.649Z,1516701765.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:45.681Z,1516701765.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:46.071Z,1516701766.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:46.086Z,1516701766.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:46.472Z,1516701766.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:46.487Z,1516701766.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:46.859Z,1516701766.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:46.897Z,1516701766.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:47.253Z,1516701767.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:47.284Z,1516701767.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:47.649Z,1516701767.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:47.663Z,1516701767.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:48.057Z,1516701768.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:48.093Z,1516701768.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:48.462Z,1516701768.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:48.485Z,1516701768.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:48.861Z,1516701768.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:48.875Z,1516701768.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:49.262Z,1516701769.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:49.285Z,1516701769.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:49.667Z,1516701769.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:49.682Z,1516701769.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:50.063Z,1516701770.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:50.077Z,1516701770.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:50.461Z,1516701770.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:50.476Z,1516701770.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:50.853Z,1516701770.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:50.868Z,1516701770.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:51.259Z,1516701771.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:51.273Z,1516701771.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:51.658Z,1516701771.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:51.673Z,1516701771.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:52.067Z,1516701772.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:52.082Z,1516701772.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:52.467Z,1516701772.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:52.482Z,1516701772.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:52.868Z,1516701772.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:52.883Z,1516701772.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:53.262Z,1516701773.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:53.281Z,1516701773.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:53.660Z,1516701773.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:53.695Z,1516701773.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:54.063Z,1516701774.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:54.078Z,1516701774.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:54.454Z,1516701774.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:54.474Z,1516701774.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:54.849Z,1516701774.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:54.885Z,1516701774.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:55.267Z,1516701775.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:55.288Z,1516701775.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:55.672Z,1516701775.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:55.687Z,1516701775.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:56.069Z,1516701776.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:56.084Z,1516701776.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:56.449Z,1516701776.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:56.486Z,1516701776.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:56.849Z,1516701776.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:56.876Z,1516701776.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:57.249Z,1516701777.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:57.285Z,1516701777.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:57.653Z,1516701777.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:57.686Z,1516701777.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:58.059Z,1516701778.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:58.089Z,1516701778.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:58.472Z,1516701778.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:58.497Z,1516701778.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:58.859Z,1516701778.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:58.893Z,1516701778.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:59.249Z,1516701779.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:59.280Z,1516701779.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:02:59.654Z,1516701779.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:02:59.690Z,1516701779.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:00.053Z,1516701780.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:00.084Z,1516701780.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:00.449Z,1516701780.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:00.464Z,1516701780.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:00.852Z,1516701780.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:00.872Z,1516701780.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:01.264Z,1516701781.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:01.294Z,1516701781.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:01.667Z,1516701781.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:01.700Z,1516701781.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:02.071Z,1516701782.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:02.104Z,1516701782.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:02.457Z,1516701782.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:02.472Z,1516701782.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:02.857Z,1516701782.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:02.877Z,1516701782.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:03.258Z,1516701783.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:03.273Z,1516701783.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:03.655Z,1516701783.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:03.683Z,1516701783.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:04.064Z,1516701784.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:04.080Z,1516701784.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:04.464Z,1516701784.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:04.479Z,1516701784.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:04.862Z,1516701784.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:04.878Z,1516701784.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:05.253Z,1516701785.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:05.275Z,1516701785.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:05.658Z,1516701785.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:05.672Z,1516701785.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:06.053Z,1516701786.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:06.074Z,1516701786.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:06.456Z,1516701786.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:06.475Z,1516701786.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:06.857Z,1516701786.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:06.871Z,1516701786.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:07.261Z,1516701787.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:07.281Z,1516701787.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:07.663Z,1516701787.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:07.678Z,1516701787.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:08.062Z,1516701788.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:08.077Z,1516701788.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:08.456Z,1516701788.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:08.471Z,1516701788.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:08.852Z,1516701788.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:08.881Z,1516701788.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:09.258Z,1516701789.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:09.273Z,1516701789.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:09.652Z,1516701789.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:09.673Z,1516701789.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:10.062Z,1516701790.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:10.077Z,1516701790.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:10.463Z,1516701790.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:10.477Z,1516701790.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:10.862Z,1516701790.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:10.877Z,1516701790.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:11.262Z,1516701791.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:11.281Z,1516701791.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:11.656Z,1516701791.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:11.690Z,1516701791.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:12.053Z,1516701792.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:12.072Z,1516701792.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:12.453Z,1516701792.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:12.476Z,1516701792.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:12.857Z,1516701792.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:12.872Z,1516701792.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:13.261Z,1516701793.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:13.281Z,1516701793.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:13.663Z,1516701793.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:13.678Z,1516701793.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:14.063Z,1516701794.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:14.084Z,1516701794.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:14.453Z,1516701794.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:14.472Z,1516701794.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:14.856Z,1516701794.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:14.871Z,1516701794.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:15.255Z,1516701795.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:15.275Z,1516701795.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:15.653Z,1516701795.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:15.674Z,1516701795.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:16.062Z,1516701796.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:16.081Z,1516701796.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:16.463Z,1516701796.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:16.478Z,1516701796.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:16.862Z,1516701796.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:16.877Z,1516701796.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:17.256Z,1516701797.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:17.271Z,1516701797.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:17.652Z,1516701797.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:17.684Z,1516701797.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:18.056Z,1516701798.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:18.071Z,1516701798.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:18.456Z,1516701798.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:18.489Z,1516701798.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:18.861Z,1516701798.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:18.876Z,1516701798.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:19.270Z,1516701799.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:19.285Z,1516701799.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:19.670Z,1516701799.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:19.685Z,1516701799.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:20.068Z,1516701800.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:20.082Z,1516701800.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:20.455Z,1516701800.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:20.475Z,1516701800.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:20.851Z,1516701800.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:20.884Z,1516701800.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:21.258Z,1516701801.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:21.273Z,1516701801.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:21.651Z,1516701801.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:21.675Z,1516701801.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:22.067Z,1516701802.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:22.082Z,1516701802.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:22.470Z,1516701802.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:22.485Z,1516701802.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:22.867Z,1516701802.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:22.885Z,1516701802.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:23.253Z,1516701803.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:23.275Z,1516701803.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:23.653Z,1516701803.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:23.679Z,1516701803.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:24.067Z,1516701804.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:24.082Z,1516701804.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:24.470Z,1516701804.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:24.485Z,1516701804.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:24.868Z,1516701804.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:24.883Z,1516701804.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:25.253Z,1516701805.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:25.276Z,1516701805.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:25.652Z,1516701805.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:25.675Z,1516701805.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:26.068Z,1516701806.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:26.083Z,1516701806.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:26.470Z,1516701806.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:26.485Z,1516701806.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:26.867Z,1516701806.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:26.882Z,1516701806.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:27.258Z,1516701807.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:27.273Z,1516701807.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:27.646Z,1516701807.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:27.678Z,1516701807.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:28.070Z,1516701808.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:28.085Z,1516701808.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:28.471Z,1516701808.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:28.485Z,1516701808.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:28.864Z,1516701808.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:28.885Z,1516701808.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:29.248Z,1516701809.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:29.281Z,1516701809.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:29.649Z,1516701809.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:29.684Z,1516701809.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:30.064Z,1516701810.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:30.091Z,1516701810.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:30.472Z,1516701810.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:30.486Z,1516701810.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:30.869Z,1516701810.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:30.884Z,1516701810.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:33.947Z,1516701813.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:33.980Z,1516701813.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:34.064Z,1516701814.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:34.089Z,1516701814.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:34.444Z,1516701814.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:34.465Z,1516701814.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:34.846Z,1516701814.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:34.868Z,1516701814.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:35.247Z,1516701815.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:35.269Z,1516701815.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:35.636Z,1516701815.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:35.665Z,1516701815.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:36.038Z,1516701816.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:36.054Z,1516701816.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:36.438Z,1516701816.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:36.454Z,1516701816.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:36.824Z,1516701816.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:36.858Z,1516701816.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:37.245Z,1516701817.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:37.261Z,1516701817.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:37.647Z,1516701817.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:37.663Z,1516701817.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:38.051Z,1516701818.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:38.067Z,1516701818.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:38.438Z,1516701818.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:38.453Z,1516701818.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:38.823Z,1516701818.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:38.855Z,1516701818.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:39.226Z,1516701819.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:39.253Z,1516701819.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:39.625Z,1516701819.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:39.653Z,1516701819.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:40.036Z,1516701820.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:40.072Z,1516701820.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:40.448Z,1516701820.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:40.469Z,1516701820.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:40.835Z,1516701820.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:40.871Z,1516701820.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:41.225Z,1516701821.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:41.257Z,1516701821.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:41.624Z,1516701821.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:41.666Z,1516701821.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:42.035Z,1516701822.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:42.071Z,1516701822.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:42.457Z,1516701822.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:42.473Z,1516701822.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:42.855Z,1516701822.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:42.877Z,1516701822.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:43.229Z,1516701823.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:43.275Z,1516701823.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:43.623Z,1516701823.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:43.638Z,1516701823.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:44.047Z,1516701824.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:44.074Z,1516701824.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:44.443Z,1516701824.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:44.471Z,1516701824.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:44.839Z,1516701824.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:44.870Z,1516701824.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:45.233Z,1516701825.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:45.248Z,1516701825.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:45.629Z,1516701825.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:45.655Z,1516701825.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:46.035Z,1516701826.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:46.051Z,1516701826.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:46.443Z,1516701826.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:46.458Z,1516701826.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:46.835Z,1516701826.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:46.856Z,1516701826.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:47.230Z,1516701827.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:47.252Z,1516701827.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:47.630Z,1516701827.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:47.654Z,1516701827.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:48.033Z,1516701828.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:48.047Z,1516701828.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:48.436Z,1516701828.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:48.479Z,1516701828.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:48.839Z,1516701828.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:48.854Z,1516701828.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:49.235Z,1516701829.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:49.256Z,1516701829.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:49.630Z,1516701829.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:49.646Z,1516701829.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:50.030Z,1516701830.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:50.053Z,1516701830.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:50.434Z,1516701830.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:50.448Z,1516701830.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:50.829Z,1516701830.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:50.849Z,1516701830.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:51.238Z,1516701831.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:51.265Z,1516701831.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:51.646Z,1516701831.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:51.661Z,1516701831.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:52.042Z,1516701832.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:52.057Z,1516701832.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:52.428Z,1516701832.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:52.450Z,1516701832.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:52.833Z,1516701832.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:52.852Z,1516701832.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:53.222Z,1516701833.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:53.254Z,1516701833.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:53.637Z,1516701833.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:53.669Z,1516701833.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:54.037Z,1516701834.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:54.051Z,1516701834.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:54.447Z,1516701834.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:54.462Z,1516701834.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:54.847Z,1516701834.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:54.862Z,1516701834.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:55.241Z,1516701835.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:55.267Z,1516701835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:55.622Z,1516701835.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:55.654Z,1516701835.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:56.024Z,1516701836.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:56.050Z,1516701836.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:56.425Z,1516701836.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:56.451Z,1516701836.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:56.824Z,1516701836.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:56.850Z,1516701836.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:57.255Z,1516701837.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:57.270Z,1516701837.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:57.652Z,1516701837.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:57.667Z,1516701837.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:58.040Z,1516701838.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:58.061Z,1516701838.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:58.424Z,1516701838.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:58.450Z,1516701838.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:58.824Z,1516701838.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:58.859Z,1516701838.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:59.222Z,1516701839.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:59.257Z,1516701839.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:03:59.625Z,1516701839.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:03:59.656Z,1516701839.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:00.024Z,1516701840.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:00.059Z,1516701840.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:00.447Z,1516701840.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:00.462Z,1516701840.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:00.846Z,1516701840.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:00.861Z,1516701840.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:01.243Z,1516701841.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:01.257Z,1516701841.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:01.622Z,1516701841.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:01.650Z,1516701841.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:02.028Z,1516701842.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:02.054Z,1516701842.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:02.425Z,1516701842.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:02.461Z,1516701842.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:02.822Z,1516701842.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:02.845Z,1516701842.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:03.235Z,1516701843.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:03.270Z,1516701843.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:03.649Z,1516701843.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:03.663Z,1516701843.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:04.035Z,1516701844.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:04.069Z,1516701844.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:04.424Z,1516701844.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:04.460Z,1516701844.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:04.824Z,1516701844.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:04.861Z,1516701844.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:05.222Z,1516701845.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:05.237Z,1516701845.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:05.625Z,1516701845.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:05.641Z,1516701845.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:06.028Z,1516701846.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:06.043Z,1516701846.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:06.443Z,1516701846.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:06.470Z,1516701846.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:06.856Z,1516701846.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:06.871Z,1516701846.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:07.238Z,1516701847.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:07.273Z,1516701847.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:07.623Z,1516701847.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:07.638Z,1516701847.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:08.033Z,1516701848.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:08.069Z,1516701848.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:08.433Z,1516701848.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:08.448Z,1516701848.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:08.829Z,1516701848.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:08.848Z,1516701848.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:09.236Z,1516701849.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:09.251Z,1516701849.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:09.640Z,1516701849.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:09.654Z,1516701849.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:10.036Z,1516701850.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:10.051Z,1516701850.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:10.432Z,1516701850.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:10.448Z,1516701850.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:10.836Z,1516701850.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:10.851Z,1516701850.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:11.230Z,1516701851.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:11.254Z,1516701851.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:11.633Z,1516701851.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:11.665Z,1516701851.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:12.038Z,1516701852.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:12.053Z,1516701852.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:12.442Z,1516701852.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:12.457Z,1516701852.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:12.843Z,1516701852.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:12.865Z,1516701852.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:13.248Z,1516701853.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:13.263Z,1516701853.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:13.622Z,1516701853.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:13.654Z,1516701853.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:14.024Z,1516701854.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:14.061Z,1516701854.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:14.425Z,1516701854.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:14.466Z,1516701854.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:14.822Z,1516701854.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:14.846Z,1516701854.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:15.235Z,1516701855.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:15.272Z,1516701855.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:15.649Z,1516701855.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:15.664Z,1516701855.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:16.035Z,1516701856.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:16.073Z,1516701856.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:16.428Z,1516701856.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:16.465Z,1516701856.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:16.824Z,1516701856.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:16.870Z,1516701856.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:17.226Z,1516701857.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:17.242Z,1516701857.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:17.633Z,1516701857.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:17.678Z,1516701857.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:18.025Z,1516701858.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:18.040Z,1516701858.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:18.444Z,1516701858.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:18.472Z,1516701858.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:18.847Z,1516701858.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:18.874Z,1516701858.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:19.239Z,1516701859.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:19.278Z,1516701859.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:19.627Z,1516701859.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:19.643Z,1516701859.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:20.037Z,1516701860.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:20.073Z,1516701860.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:20.433Z,1516701860.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:20.448Z,1516701860.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:20.829Z,1516701860.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:20.846Z,1516701860.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:21.248Z,1516701861.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:21.275Z,1516701861.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:21.301Z,1516701861.301 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:04:21.639Z,1516701861.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:21.655Z,1516701861.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:22.036Z,1516701862.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:22.052Z,1516701862.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:22.431Z,1516701862.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:22.446Z,1516701862.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:22.832Z,1516701862.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:22.847Z,1516701862.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:23.232Z,1516701863.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:23.247Z,1516701863.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:23.630Z,1516701863.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:23.653Z,1516701863.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:24.037Z,1516701864.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:24.051Z,1516701864.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:24.438Z,1516701864.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:24.457Z,1516701864.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:24.839Z,1516701864.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:24.854Z,1516701864.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:25.238Z,1516701865.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:25.253Z,1516701865.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:25.632Z,1516701865.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:25.647Z,1516701865.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:26.028Z,1516701866.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:26.057Z,1516701866.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:26.434Z,1516701866.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:26.449Z,1516701866.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:26.828Z,1516701866.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:26.848Z,1516701866.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:27.237Z,1516701867.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:27.257Z,1516701867.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:27.643Z,1516701867.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:27.664Z,1516701867.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:28.038Z,1516701868.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:28.061Z,1516701868.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:28.436Z,1516701868.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:28.452Z,1516701868.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:28.833Z,1516701868.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:28.848Z,1516701868.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:28.851Z,1516701868.851 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T09:59:28.8Z 2018-01-23T10:04:28.851Z,1516701868.851 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:04:28.851Z,1516701868.851 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:04:29.232Z,1516701869.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:29.247Z,1516701869.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:29.755Z,1516701869.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:29.770Z,1516701869.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:30.033Z,1516701870.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:30.053Z,1516701870.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:33.141Z,1516701873.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:33.157Z,1516701873.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:33.231Z,1516701873.231 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0160.lzma 2018-01-23T10:04:33.263Z,1516701873.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:33.290Z,1516701873.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:33.633Z,1516701873.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:33.649Z,1516701873.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:33.985Z,1516701873.985 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0160.lzma.bak 2018-01-23T10:04:33.985Z,1516701873.985 [DataOverHttps](INFO): SBD MOMSN=7755397 2018-01-23T10:04:34.033Z,1516701874.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:34.048Z,1516701874.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:34.703Z,1516701874.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:34.718Z,1516701874.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:34.825Z,1516701874.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:34.855Z,1516701874.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:37.924Z,1516701877.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:37.955Z,1516701877.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:38.056Z,1516701878.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:38.072Z,1516701878.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:38.424Z,1516701878.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:38.453Z,1516701878.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:38.812Z,1516701878.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:38.827Z,1516701878.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:39.204Z,1516701879.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:39.226Z,1516701879.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:39.616Z,1516701879.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:39.631Z,1516701879.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:42.723Z,1516701882.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:42.761Z,1516701882.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:42.823Z,1516701882.823 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0161.lzma 2018-01-23T10:04:42.864Z,1516701882.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:42.889Z,1516701882.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:43.225Z,1516701883.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:43.261Z,1516701883.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:43.586Z,1516701883.586 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0161.lzma.bak 2018-01-23T10:04:43.586Z,1516701883.586 [DataOverHttps](INFO): SBD MOMSN=7755399 2018-01-23T10:04:43.643Z,1516701883.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:43.666Z,1516701883.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:43.666Z,1516701883.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136 2018-01-23T10:04:43.666Z,1516701883.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:04:43.668Z,1516701883.668 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:43.668Z,1516701883.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 136 2018-01-23T10:04:43.668Z,1516701883.668 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:04:43.670Z,1516701883.670 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:43.670Z,1516701883.670 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136 2018-01-23T10:04:43.670Z,1516701883.670 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:04:43.681Z,1516701883.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:04:43.682Z,1516701883.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:04:43.682Z,1516701883.682 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:04:44.244Z,1516701884.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:44.269Z,1516701884.269 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:04:44.269Z,1516701884.269 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:04:44.269Z,1516701884.269 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:04:44.279Z,1516701884.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:04:44.279Z,1516701884.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136 2018-01-23T10:04:44.280Z,1516701884.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:04:44.280Z,1516701884.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 136 2018-01-23T10:04:44.280Z,1516701884.280 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:04:44.280Z,1516701884.280 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136 2018-01-23T10:04:44.417Z,1516701884.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:44.444Z,1516701884.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:04:44.445Z,1516701884.445 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:04:44.445Z,1516701884.445 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:04:44.445Z,1516701884.445 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:04:44.446Z,1516701884.446 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:04:44.446Z,1516701884.446 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:04:44.446Z,1516701884.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:04:44.451Z,1516701884.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:04:44.451Z,1516701884.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:04:47.545Z,1516701887.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:47.583Z,1516701887.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T10:04:47.584Z,1516701887.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:47.684Z,1516701887.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:47.699Z,1516701887.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:04:47.700Z,1516701887.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:48.055Z,1516701888.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:48.088Z,1516701888.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:04:48.089Z,1516701888.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:48.451Z,1516701888.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:48.480Z,1516701888.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:04:48.481Z,1516701888.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:48.834Z,1516701888.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:48.849Z,1516701888.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:04:48.850Z,1516701888.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:49.234Z,1516701889.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:49.249Z,1516701889.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:04:49.250Z,1516701889.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:49.637Z,1516701889.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:49.652Z,1516701889.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:04:49.653Z,1516701889.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:50.030Z,1516701890.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:50.057Z,1516701890.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:04:50.058Z,1516701890.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:50.456Z,1516701890.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:50.491Z,1516701890.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:04:50.492Z,1516701890.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:50.846Z,1516701890.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:50.861Z,1516701890.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:04:50.861Z,1516701890.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:51.245Z,1516701891.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:51.269Z,1516701891.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:04:51.270Z,1516701891.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:51.638Z,1516701891.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:51.660Z,1516701891.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:04:51.661Z,1516701891.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:52.043Z,1516701892.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:52.057Z,1516701892.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:04:52.058Z,1516701892.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:52.441Z,1516701892.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:52.461Z,1516701892.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:04:52.462Z,1516701892.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:52.836Z,1516701892.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:52.858Z,1516701892.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:04:52.859Z,1516701892.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:53.249Z,1516701893.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:53.264Z,1516701893.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:04:53.265Z,1516701893.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:53.650Z,1516701893.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:53.672Z,1516701893.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:04:53.673Z,1516701893.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:54.056Z,1516701894.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:54.076Z,1516701894.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:04:54.077Z,1516701894.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:54.429Z,1516701894.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:54.460Z,1516701894.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:04:54.461Z,1516701894.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:54.829Z,1516701894.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:54.864Z,1516701894.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:04:54.865Z,1516701894.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:55.234Z,1516701895.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:55.262Z,1516701895.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:04:55.263Z,1516701895.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:55.655Z,1516701895.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:55.670Z,1516701895.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:04:55.671Z,1516701895.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:56.027Z,1516701896.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:56.064Z,1516701896.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:04:56.065Z,1516701896.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:56.445Z,1516701896.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:56.461Z,1516701896.461 [PNI_TCM](ERROR): CRC does not match. Expected:0x2184 got:0x7234 2018-01-23T10:04:56.488Z,1516701896.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:04:56.489Z,1516701896.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:56.860Z,1516701896.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:56.875Z,1516701896.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:04:56.876Z,1516701896.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:57.248Z,1516701897.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:57.274Z,1516701897.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:04:57.279Z,1516701897.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:57.629Z,1516701897.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:57.661Z,1516701897.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:04:57.662Z,1516701897.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:58.031Z,1516701898.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:58.040Z,1516701898.040 [PNI_TCM](ERROR): CRC does not match. Expected:0x24985 got:0x16956 2018-01-23T10:04:58.069Z,1516701898.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:04:58.070Z,1516701898.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:58.436Z,1516701898.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:58.464Z,1516701898.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:04:58.465Z,1516701898.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:58.852Z,1516701898.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:58.871Z,1516701898.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:04:58.872Z,1516701898.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:59.241Z,1516701899.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:59.278Z,1516701899.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:04:59.279Z,1516701899.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:04:59.641Z,1516701899.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:04:59.673Z,1516701899.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:04:59.674Z,1516701899.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:00.047Z,1516701900.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:00.076Z,1516701900.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:05:00.077Z,1516701900.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:00.436Z,1516701900.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:00.470Z,1516701900.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:05:00.471Z,1516701900.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:00.828Z,1516701900.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:00.868Z,1516701900.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:05:00.869Z,1516701900.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:01.247Z,1516701901.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:01.264Z,1516701901.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x48514 got:0x55710 2018-01-23T10:05:01.292Z,1516701901.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:05:01.293Z,1516701901.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:01.641Z,1516701901.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:01.671Z,1516701901.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:05:01.672Z,1516701901.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:02.033Z,1516701902.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:02.047Z,1516701902.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:05:02.048Z,1516701902.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:02.449Z,1516701902.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:02.474Z,1516701902.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:05:02.475Z,1516701902.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:02.845Z,1516701902.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:02.870Z,1516701902.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:05:02.871Z,1516701902.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:03.241Z,1516701903.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:03.274Z,1516701903.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:05:03.275Z,1516701903.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:03.641Z,1516701903.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:03.674Z,1516701903.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:04.040Z,1516701904.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:04.071Z,1516701904.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:04.439Z,1516701904.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:04.448Z,1516701904.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x1947 got:0x23325 2018-01-23T10:05:04.484Z,1516701904.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:04.839Z,1516701904.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:04.854Z,1516701904.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:05.250Z,1516701905.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:05.279Z,1516701905.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:05.645Z,1516701905.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:05.736Z,1516701905.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:06.049Z,1516701906.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:06.079Z,1516701906.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:06.443Z,1516701906.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:06.457Z,1516701906.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:06.831Z,1516701906.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:06.853Z,1516701906.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:07.234Z,1516701907.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:07.270Z,1516701907.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:07.633Z,1516701907.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:07.675Z,1516701907.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:08.035Z,1516701908.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:08.052Z,1516701908.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:08.441Z,1516701908.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:08.457Z,1516701908.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:08.843Z,1516701908.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:08.881Z,1516701908.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:09.240Z,1516701909.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:09.250Z,1516701909.250 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T10:05:09.288Z,1516701909.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:09.637Z,1516701909.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:09.646Z,1516701909.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x58029 got:0x16384 2018-01-23T10:05:09.682Z,1516701909.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:10.040Z,1516701910.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:10.055Z,1516701910.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:10.436Z,1516701910.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:10.481Z,1516701910.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:10.834Z,1516701910.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:10.863Z,1516701910.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:11.251Z,1516701911.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:11.272Z,1516701911.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:11.645Z,1516701911.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:11.668Z,1516701911.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:12.044Z,1516701912.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:12.090Z,1516701912.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:12.438Z,1516701912.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:12.472Z,1516701912.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:12.826Z,1516701912.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:12.856Z,1516701912.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:13.269Z,1516701913.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:13.296Z,1516701913.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:13.638Z,1516701913.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:13.673Z,1516701913.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:14.026Z,1516701914.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:14.064Z,1516701914.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:14.444Z,1516701914.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:14.481Z,1516701914.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:14.858Z,1516701914.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:14.872Z,1516701914.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:15.239Z,1516701915.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:15.285Z,1516701915.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:15.628Z,1516701915.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:15.668Z,1516701915.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:16.033Z,1516701916.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:16.068Z,1516701916.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:16.431Z,1516701916.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:16.462Z,1516701916.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:16.828Z,1516701916.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:16.868Z,1516701916.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:17.239Z,1516701917.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:17.285Z,1516701917.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:17.649Z,1516701917.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:17.672Z,1516701917.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:18.052Z,1516701918.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:18.067Z,1516701918.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:18.438Z,1516701918.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:18.478Z,1516701918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:18.829Z,1516701918.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:18.849Z,1516701918.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:19.240Z,1516701919.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:19.275Z,1516701919.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:19.638Z,1516701919.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:19.656Z,1516701919.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:20.033Z,1516701920.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:20.081Z,1516701920.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:20.443Z,1516701920.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:20.460Z,1516701920.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:20.843Z,1516701920.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:20.862Z,1516701920.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:21.243Z,1516701921.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:21.260Z,1516701921.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:21.633Z,1516701921.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:21.678Z,1516701921.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:22.033Z,1516701922.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:22.065Z,1516701922.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:22.441Z,1516701922.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:22.493Z,1516701922.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:22.833Z,1516701922.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:22.874Z,1516701922.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:23.243Z,1516701923.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:23.286Z,1516701923.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:23.648Z,1516701923.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:23.663Z,1516701923.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:24.042Z,1516701924.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:24.060Z,1516701924.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:24.438Z,1516701924.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:24.457Z,1516701924.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:24.833Z,1516701924.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:24.853Z,1516701924.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:25.242Z,1516701925.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:25.257Z,1516701925.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:25.644Z,1516701925.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:25.661Z,1516701925.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:26.042Z,1516701926.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:26.061Z,1516701926.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:26.441Z,1516701926.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:26.456Z,1516701926.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:26.833Z,1516701926.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:26.857Z,1516701926.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:27.247Z,1516701927.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:27.265Z,1516701927.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:27.648Z,1516701927.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:27.688Z,1516701927.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:28.049Z,1516701928.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:28.091Z,1516701928.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:28.436Z,1516701928.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:28.463Z,1516701928.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:28.841Z,1516701928.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:28.857Z,1516701928.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:29.244Z,1516701929.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:29.266Z,1516701929.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:29.651Z,1516701929.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:29.667Z,1516701929.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:30.042Z,1516701930.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:30.065Z,1516701930.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:30.431Z,1516701930.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:30.475Z,1516701930.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:30.829Z,1516701930.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:30.857Z,1516701930.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:31.244Z,1516701931.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:31.275Z,1516701931.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:31.655Z,1516701931.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:31.669Z,1516701931.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:32.044Z,1516701932.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:32.072Z,1516701932.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:32.429Z,1516701932.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:32.462Z,1516701932.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:32.829Z,1516701932.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:32.867Z,1516701932.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:33.248Z,1516701933.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:33.271Z,1516701933.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:33.648Z,1516701933.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:33.686Z,1516701933.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:34.040Z,1516701934.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:34.073Z,1516701934.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:34.430Z,1516701934.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:34.445Z,1516701934.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:34.841Z,1516701934.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:34.872Z,1516701934.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:35.251Z,1516701935.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:35.283Z,1516701935.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:35.655Z,1516701935.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:35.686Z,1516701935.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:36.052Z,1516701936.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:36.100Z,1516701936.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:36.440Z,1516701936.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:36.456Z,1516701936.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:36.834Z,1516701936.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:36.854Z,1516701936.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:37.243Z,1516701937.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:37.260Z,1516701937.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:37.643Z,1516701937.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:37.661Z,1516701937.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:38.042Z,1516701938.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:38.065Z,1516701938.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:38.441Z,1516701938.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:38.457Z,1516701938.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:38.834Z,1516701938.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:38.859Z,1516701938.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:39.244Z,1516701939.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:39.267Z,1516701939.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:39.652Z,1516701939.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:39.671Z,1516701939.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:40.051Z,1516701940.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:40.072Z,1516701940.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:40.441Z,1516701940.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:40.457Z,1516701940.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:40.828Z,1516701940.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:40.860Z,1516701940.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:41.248Z,1516701941.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:41.263Z,1516701941.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:41.651Z,1516701941.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:41.666Z,1516701941.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:42.042Z,1516701942.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:42.065Z,1516701942.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:42.429Z,1516701942.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:42.455Z,1516701942.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:42.829Z,1516701942.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:42.854Z,1516701942.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:43.242Z,1516701943.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:43.274Z,1516701943.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:43.650Z,1516701943.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:43.679Z,1516701943.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:44.044Z,1516701944.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:44.065Z,1516701944.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:44.430Z,1516701944.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:44.461Z,1516701944.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:44.829Z,1516701944.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:44.864Z,1516701944.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:47.955Z,1516701947.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:47.970Z,1516701947.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:48.115Z,1516701948.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:48.162Z,1516701948.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:48.453Z,1516701948.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:48.502Z,1516701948.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:48.837Z,1516701948.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:48.852Z,1516701948.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:49.237Z,1516701949.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:49.252Z,1516701949.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:49.644Z,1516701949.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:49.669Z,1516701949.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:50.050Z,1516701950.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:50.114Z,1516701950.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:50.453Z,1516701950.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:50.503Z,1516701950.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:50.856Z,1516701950.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:50.916Z,1516701950.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:51.250Z,1516701951.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:51.278Z,1516701951.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:51.626Z,1516701951.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:51.654Z,1516701951.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:52.031Z,1516701952.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:52.069Z,1516701952.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:52.438Z,1516701952.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:52.479Z,1516701952.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:52.839Z,1516701952.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:52.862Z,1516701952.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:53.253Z,1516701953.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:53.307Z,1516701953.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:53.658Z,1516701953.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:53.734Z,1516701953.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:54.054Z,1516701954.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:54.081Z,1516701954.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:54.442Z,1516701954.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:54.492Z,1516701954.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:54.843Z,1516701954.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:54.920Z,1516701954.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:55.248Z,1516701955.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:55.269Z,1516701955.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:55.658Z,1516701955.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:55.677Z,1516701955.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:56.054Z,1516701956.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:56.117Z,1516701956.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:56.432Z,1516701956.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:56.471Z,1516701956.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:56.834Z,1516701956.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:56.870Z,1516701956.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:57.276Z,1516701957.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:57.334Z,1516701957.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:57.650Z,1516701957.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:57.681Z,1516701957.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:58.053Z,1516701958.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:58.089Z,1516701958.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:58.444Z,1516701958.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:58.463Z,1516701958.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:58.839Z,1516701958.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:58.862Z,1516701958.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:59.246Z,1516701959.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:59.289Z,1516701959.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:05:59.659Z,1516701959.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:05:59.678Z,1516701959.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:00.042Z,1516701960.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:00.077Z,1516701960.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:00.461Z,1516701960.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:00.492Z,1516701960.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:00.835Z,1516701960.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:00.922Z,1516701960.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:01.244Z,1516701961.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:01.279Z,1516701961.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:01.652Z,1516701961.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:01.674Z,1516701961.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:02.051Z,1516701962.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:02.076Z,1516701962.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:02.432Z,1516701962.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:02.453Z,1516701962.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:02.836Z,1516701962.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:02.857Z,1516701962.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:03.236Z,1516701963.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:03.255Z,1516701963.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:03.647Z,1516701963.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:03.662Z,1516701963.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:04.046Z,1516701964.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:04.061Z,1516701964.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:04.455Z,1516701964.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:04.478Z,1516701964.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:04.836Z,1516701964.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:04.851Z,1516701964.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:05.239Z,1516701965.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:05.254Z,1516701965.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:05.637Z,1516701965.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:05.660Z,1516701965.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:06.037Z,1516701966.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:06.064Z,1516701966.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:06.443Z,1516701966.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:06.458Z,1516701966.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:06.844Z,1516701966.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:06.859Z,1516701966.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:07.244Z,1516701967.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:07.273Z,1516701967.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:07.633Z,1516701967.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:07.659Z,1516701967.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:08.029Z,1516701968.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:08.064Z,1516701968.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:08.429Z,1516701968.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:08.455Z,1516701968.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:08.829Z,1516701968.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:08.861Z,1516701968.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:09.250Z,1516701969.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:09.273Z,1516701969.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:09.652Z,1516701969.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:09.667Z,1516701969.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:10.053Z,1516701970.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:10.068Z,1516701970.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:10.450Z,1516701970.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:10.465Z,1516701970.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:10.829Z,1516701970.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:10.866Z,1516701970.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:11.232Z,1516701971.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:11.261Z,1516701971.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:11.633Z,1516701971.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:11.669Z,1516701971.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:12.033Z,1516701972.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:12.069Z,1516701972.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:12.444Z,1516701972.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:12.473Z,1516701972.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:12.852Z,1516701972.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:12.873Z,1516701972.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:13.240Z,1516701973.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:13.277Z,1516701973.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:13.637Z,1516701973.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:13.669Z,1516701973.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:14.037Z,1516701974.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:14.052Z,1516701974.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:14.433Z,1516701974.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:14.457Z,1516701974.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:14.836Z,1516701974.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:14.852Z,1516701974.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:15.240Z,1516701975.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:15.256Z,1516701975.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:15.640Z,1516701975.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:15.656Z,1516701975.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:16.044Z,1516701976.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:16.059Z,1516701976.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:16.443Z,1516701976.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:16.457Z,1516701976.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:16.837Z,1516701976.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:16.852Z,1516701976.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:17.236Z,1516701977.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:17.251Z,1516701977.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:17.638Z,1516701977.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:17.653Z,1516701977.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:18.040Z,1516701978.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:18.056Z,1516701978.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:18.442Z,1516701978.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:18.461Z,1516701978.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:18.843Z,1516701978.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:18.857Z,1516701978.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:19.244Z,1516701979.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:19.259Z,1516701979.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:19.636Z,1516701979.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:19.651Z,1516701979.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:20.037Z,1516701980.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:20.051Z,1516701980.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:20.440Z,1516701980.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:20.455Z,1516701980.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:20.833Z,1516701980.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:20.855Z,1516701980.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:21.237Z,1516701981.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:21.252Z,1516701981.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:21.645Z,1516701981.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:21.666Z,1516701981.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:22.046Z,1516701982.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:22.065Z,1516701982.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:22.446Z,1516701982.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:22.461Z,1516701982.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:22.832Z,1516701982.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:22.854Z,1516701982.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:23.236Z,1516701983.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:23.257Z,1516701983.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:23.638Z,1516701983.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:23.653Z,1516701983.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:24.036Z,1516701984.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:24.057Z,1516701984.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:24.446Z,1516701984.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:24.469Z,1516701984.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:24.847Z,1516701984.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:24.862Z,1516701984.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:25.246Z,1516701985.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:25.261Z,1516701985.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:25.636Z,1516701985.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:25.655Z,1516701985.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:26.035Z,1516701986.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:26.055Z,1516701986.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:26.432Z,1516701986.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:26.455Z,1516701986.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:26.833Z,1516701986.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:26.856Z,1516701986.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:27.237Z,1516701987.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:27.252Z,1516701987.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:27.651Z,1516701987.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:27.673Z,1516701987.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:28.050Z,1516701988.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:28.065Z,1516701988.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:28.448Z,1516701988.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:28.462Z,1516701988.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:28.832Z,1516701988.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:28.855Z,1516701988.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:29.231Z,1516701989.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:29.262Z,1516701989.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:29.638Z,1516701989.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:29.653Z,1516701989.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:30.032Z,1516701990.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:30.055Z,1516701990.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:30.447Z,1516701990.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:30.462Z,1516701990.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:30.850Z,1516701990.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:30.865Z,1516701990.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:31.247Z,1516701991.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:31.262Z,1516701991.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:31.632Z,1516701991.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:31.663Z,1516701991.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:32.041Z,1516701992.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:32.056Z,1516701992.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:32.440Z,1516701992.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:32.465Z,1516701992.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:32.829Z,1516701992.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:32.861Z,1516701992.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:33.228Z,1516701993.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:33.263Z,1516701993.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:33.649Z,1516701993.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:33.703Z,1516701993.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:34.052Z,1516701994.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:34.066Z,1516701994.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:34.442Z,1516701994.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:34.469Z,1516701994.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:34.845Z,1516701994.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:34.865Z,1516701994.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:35.228Z,1516701995.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:35.261Z,1516701995.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:35.629Z,1516701995.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:35.661Z,1516701995.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:36.028Z,1516701996.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:36.055Z,1516701996.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:36.447Z,1516701996.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:36.468Z,1516701996.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:36.850Z,1516701996.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:36.877Z,1516701996.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:37.244Z,1516701997.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:37.265Z,1516701997.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:37.628Z,1516701997.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:37.661Z,1516701997.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:38.027Z,1516701998.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:38.063Z,1516701998.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:38.432Z,1516701998.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:38.459Z,1516701998.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:38.829Z,1516701998.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:38.861Z,1516701998.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:39.232Z,1516701999.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:39.259Z,1516701999.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:39.648Z,1516701999.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:39.663Z,1516701999.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:40.049Z,1516702000.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:40.069Z,1516702000.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:40.447Z,1516702000.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:40.473Z,1516702000.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:40.832Z,1516702000.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:40.859Z,1516702000.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:41.228Z,1516702001.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:41.261Z,1516702001.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:41.629Z,1516702001.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:41.666Z,1516702001.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:42.036Z,1516702002.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:42.069Z,1516702002.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:42.447Z,1516702002.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:42.476Z,1516702002.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:42.852Z,1516702002.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:42.867Z,1516702002.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:43.244Z,1516702003.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:43.266Z,1516702003.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:43.629Z,1516702003.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:43.665Z,1516702003.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:44.028Z,1516702004.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:44.065Z,1516702004.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:44.432Z,1516702004.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:44.465Z,1516702004.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:44.838Z,1516702004.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:44.865Z,1516702004.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:48.058Z,1516702008.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:48.073Z,1516702008.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:48.198Z,1516702008.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:48.233Z,1516702008.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:48.552Z,1516702008.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:48.585Z,1516702008.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:48.952Z,1516702008.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:48.966Z,1516702008.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:49.328Z,1516702009.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:49.362Z,1516702009.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:49.725Z,1516702009.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:49.749Z,1516702009.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:50.125Z,1516702010.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:50.140Z,1516702010.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:50.536Z,1516702010.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:50.565Z,1516702010.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:50.948Z,1516702010.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:50.973Z,1516702010.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:51.359Z,1516702011.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:51.374Z,1516702011.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:51.733Z,1516702011.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:51.775Z,1516702011.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:52.137Z,1516702012.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:52.173Z,1516702012.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:52.538Z,1516702012.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:52.553Z,1516702012.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:52.930Z,1516702012.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:52.949Z,1516702012.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:53.335Z,1516702013.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:53.352Z,1516702013.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:53.739Z,1516702013.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:53.760Z,1516702013.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:54.139Z,1516702014.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:54.155Z,1516702014.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:54.532Z,1516702014.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:54.552Z,1516702014.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:54.934Z,1516702014.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:54.952Z,1516702014.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:55.338Z,1516702015.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:55.361Z,1516702015.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:55.742Z,1516702015.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:55.757Z,1516702015.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:56.143Z,1516702016.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:56.158Z,1516702016.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:56.532Z,1516702016.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:56.552Z,1516702016.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:56.942Z,1516702016.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:56.957Z,1516702016.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:57.344Z,1516702017.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:57.365Z,1516702017.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:57.748Z,1516702017.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:57.763Z,1516702017.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:58.144Z,1516702018.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:58.161Z,1516702018.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:58.528Z,1516702018.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:58.563Z,1516702018.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:58.935Z,1516702018.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:58.951Z,1516702018.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:59.343Z,1516702019.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:59.380Z,1516702019.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:06:59.750Z,1516702019.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:06:59.765Z,1516702019.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:00.140Z,1516702020.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:00.169Z,1516702020.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:00.526Z,1516702020.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:00.558Z,1516702020.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:00.925Z,1516702020.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:00.960Z,1516702020.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:01.340Z,1516702021.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:01.368Z,1516702021.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:01.740Z,1516702021.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:01.770Z,1516702021.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:02.136Z,1516702022.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:02.166Z,1516702022.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:02.525Z,1516702022.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:02.541Z,1516702022.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:02.925Z,1516702022.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:02.941Z,1516702022.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:03.327Z,1516702023.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:03.342Z,1516702023.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:03.749Z,1516702023.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:03.774Z,1516702023.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:04.152Z,1516702024.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:04.178Z,1516702024.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:04.548Z,1516702024.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:04.575Z,1516702024.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:04.925Z,1516702024.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:04.940Z,1516702024.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:05.336Z,1516702025.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:05.353Z,1516702025.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:05.729Z,1516702025.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:05.760Z,1516702025.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:06.128Z,1516702026.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:06.155Z,1516702026.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:06.540Z,1516702026.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:06.555Z,1516702026.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:06.938Z,1516702026.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:06.953Z,1516702026.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:07.336Z,1516702027.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:07.365Z,1516702027.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:07.732Z,1516702027.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:07.748Z,1516702027.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:08.141Z,1516702028.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:08.156Z,1516702028.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:08.533Z,1516702028.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:08.548Z,1516702028.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:08.928Z,1516702028.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:08.955Z,1516702028.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:09.337Z,1516702029.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:09.352Z,1516702029.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:09.743Z,1516702029.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:09.765Z,1516702029.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:10.146Z,1516702030.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:10.161Z,1516702030.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:10.544Z,1516702030.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:10.559Z,1516702030.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:10.928Z,1516702030.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:10.951Z,1516702030.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:11.327Z,1516702031.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:11.359Z,1516702031.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:11.734Z,1516702031.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:11.749Z,1516702031.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:12.124Z,1516702032.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:12.158Z,1516702032.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:12.543Z,1516702032.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:12.565Z,1516702032.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:12.951Z,1516702032.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:12.965Z,1516702032.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:13.340Z,1516702033.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:13.362Z,1516702033.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:13.724Z,1516702033.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:13.758Z,1516702033.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:14.124Z,1516702034.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:14.151Z,1516702034.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:14.525Z,1516702034.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:14.561Z,1516702034.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:14.929Z,1516702034.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:14.956Z,1516702034.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:15.323Z,1516702035.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:15.359Z,1516702035.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:15.748Z,1516702035.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:15.763Z,1516702035.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:16.148Z,1516702036.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:16.162Z,1516702036.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:16.538Z,1516702036.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:16.570Z,1516702036.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:16.922Z,1516702036.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:16.950Z,1516702036.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:17.325Z,1516702037.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:17.357Z,1516702037.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:17.725Z,1516702037.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:17.760Z,1516702037.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:18.124Z,1516702038.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:18.165Z,1516702038.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:18.535Z,1516702038.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:18.567Z,1516702038.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:18.947Z,1516702038.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:18.974Z,1516702038.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:19.340Z,1516702039.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:19.374Z,1516702039.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:19.737Z,1516702039.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:19.773Z,1516702039.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:20.132Z,1516702040.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:20.148Z,1516702040.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:20.533Z,1516702040.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:20.549Z,1516702040.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:20.934Z,1516702040.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:20.950Z,1516702040.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:21.334Z,1516702041.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:21.349Z,1516702041.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:21.748Z,1516702041.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:21.778Z,1516702041.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:22.143Z,1516702042.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:22.176Z,1516702042.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:22.539Z,1516702042.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:22.579Z,1516702042.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:22.929Z,1516702042.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:22.945Z,1516702042.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:23.330Z,1516702043.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:23.355Z,1516702043.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:23.734Z,1516702043.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:23.749Z,1516702043.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:24.128Z,1516702044.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:24.148Z,1516702044.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:24.539Z,1516702044.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:24.555Z,1516702044.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:24.939Z,1516702044.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:24.954Z,1516702044.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:25.336Z,1516702045.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:25.351Z,1516702045.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:25.731Z,1516702045.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:25.746Z,1516702045.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:26.132Z,1516702046.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:26.147Z,1516702046.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:26.532Z,1516702046.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:26.548Z,1516702046.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:26.930Z,1516702046.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:26.956Z,1516702046.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:27.334Z,1516702047.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:27.349Z,1516702047.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:27.748Z,1516702047.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:27.779Z,1516702047.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:28.139Z,1516702048.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:28.155Z,1516702048.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:28.539Z,1516702048.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:28.554Z,1516702048.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:28.929Z,1516702048.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:28.949Z,1516702048.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:29.338Z,1516702049.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:29.353Z,1516702049.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:29.735Z,1516702049.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:29.750Z,1516702049.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:30.128Z,1516702050.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:30.149Z,1516702050.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:30.539Z,1516702050.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:30.554Z,1516702050.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:30.939Z,1516702050.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:30.960Z,1516702050.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:31.338Z,1516702051.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:31.353Z,1516702051.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:31.733Z,1516702051.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:31.748Z,1516702051.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:32.133Z,1516702052.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:32.149Z,1516702052.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:32.532Z,1516702052.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:32.548Z,1516702052.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:32.929Z,1516702052.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:32.957Z,1516702052.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:33.337Z,1516702053.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:33.353Z,1516702053.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:33.742Z,1516702053.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:33.765Z,1516702053.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:34.146Z,1516702054.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:34.169Z,1516702054.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:34.548Z,1516702054.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:34.563Z,1516702054.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:34.922Z,1516702054.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:34.950Z,1516702054.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:35.324Z,1516702055.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:35.361Z,1516702055.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:35.729Z,1516702055.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:35.756Z,1516702055.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:36.123Z,1516702056.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:36.161Z,1516702056.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:36.548Z,1516702056.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:36.563Z,1516702056.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:36.948Z,1516702056.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:36.963Z,1516702056.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:37.340Z,1516702057.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:37.373Z,1516702057.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:37.729Z,1516702057.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:37.762Z,1516702057.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:38.125Z,1516702058.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:38.163Z,1516702058.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:38.530Z,1516702058.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:38.563Z,1516702058.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:38.938Z,1516702058.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:38.966Z,1516702058.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:39.325Z,1516702059.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:39.361Z,1516702059.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:39.735Z,1516702059.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:39.777Z,1516702059.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:40.155Z,1516702060.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:40.170Z,1516702060.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:40.536Z,1516702060.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:40.571Z,1516702060.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:40.922Z,1516702060.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:40.938Z,1516702060.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:41.324Z,1516702061.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:41.345Z,1516702061.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:41.734Z,1516702061.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:41.748Z,1516702061.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:42.123Z,1516702062.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:42.142Z,1516702062.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:42.549Z,1516702062.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:42.574Z,1516702062.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:42.952Z,1516702062.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:42.978Z,1516702062.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:43.335Z,1516702063.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:43.352Z,1516702063.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:43.730Z,1516702063.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:43.753Z,1516702063.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:44.132Z,1516702064.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:44.146Z,1516702064.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:44.529Z,1516702064.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:44.549Z,1516702064.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:44.549Z,1516702064.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137 2018-01-23T10:07:44.549Z,1516702064.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:07:44.555Z,1516702064.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:44.555Z,1516702064.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 137 2018-01-23T10:07:44.555Z,1516702064.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:07:44.557Z,1516702064.557 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:44.557Z,1516702064.557 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137 2018-01-23T10:07:44.557Z,1516702064.557 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:07:44.574Z,1516702064.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:07:44.579Z,1516702064.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:07:44.579Z,1516702064.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:07:44.932Z,1516702064.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:44.988Z,1516702064.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:07:44.988Z,1516702064.988 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137 2018-01-23T10:07:44.989Z,1516702064.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:07:44.989Z,1516702064.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 137 2018-01-23T10:07:44.989Z,1516702064.989 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:07:44.989Z,1516702064.989 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137 2018-01-23T10:07:48.030Z,1516702068.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:48.044Z,1516702068.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:07:48.044Z,1516702068.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:07:48.044Z,1516702068.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:07:48.045Z,1516702068.045 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:07:48.045Z,1516702068.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:07:48.045Z,1516702068.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:07:48.046Z,1516702068.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:07:48.046Z,1516702068.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:07:48.047Z,1516702068.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:07:48.162Z,1516702068.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:48.194Z,1516702068.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:07:48.196Z,1516702068.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:48.503Z,1516702068.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:48.518Z,1516702068.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:07:48.519Z,1516702068.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:48.907Z,1516702068.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:48.946Z,1516702068.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:07:48.947Z,1516702068.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:49.300Z,1516702069.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:49.315Z,1516702069.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:07:49.316Z,1516702069.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:49.699Z,1516702069.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:49.714Z,1516702069.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:07:49.715Z,1516702069.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:50.097Z,1516702070.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:50.111Z,1516702070.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:07:50.112Z,1516702070.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:50.502Z,1516702070.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:50.517Z,1516702070.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:07:50.518Z,1516702070.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:50.903Z,1516702070.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:50.918Z,1516702070.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:07:50.919Z,1516702070.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:51.302Z,1516702071.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:51.316Z,1516702071.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:07:51.317Z,1516702071.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:51.696Z,1516702071.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:51.710Z,1516702071.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:07:51.712Z,1516702071.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:52.093Z,1516702072.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:52.107Z,1516702072.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:07:52.108Z,1516702072.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:52.497Z,1516702072.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:52.511Z,1516702072.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:07:52.512Z,1516702072.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:52.893Z,1516702072.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:52.915Z,1516702072.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:07:52.916Z,1516702072.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:53.296Z,1516702073.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:53.310Z,1516702073.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:07:53.312Z,1516702073.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:53.707Z,1516702073.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:53.721Z,1516702073.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:07:53.722Z,1516702073.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:54.106Z,1516702074.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:54.124Z,1516702074.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:07:54.125Z,1516702074.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:54.506Z,1516702074.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:54.524Z,1516702074.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:07:54.525Z,1516702074.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:54.897Z,1516702074.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:54.912Z,1516702074.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:07:54.913Z,1516702074.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:55.292Z,1516702075.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:55.312Z,1516702075.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:07:55.313Z,1516702075.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:55.692Z,1516702075.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:55.710Z,1516702075.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:07:55.715Z,1516702075.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:56.097Z,1516702076.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:56.116Z,1516702076.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:07:56.117Z,1516702076.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:56.510Z,1516702076.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:56.525Z,1516702076.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:07:56.526Z,1516702076.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:56.916Z,1516702076.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:56.936Z,1516702076.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:07:56.937Z,1516702076.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:57.311Z,1516702077.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:57.326Z,1516702077.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:07:57.327Z,1516702077.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:57.689Z,1516702077.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:57.714Z,1516702077.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:07:57.715Z,1516702077.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:58.088Z,1516702078.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:58.120Z,1516702078.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:07:58.121Z,1516702078.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:58.489Z,1516702078.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:58.515Z,1516702078.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:07:58.516Z,1516702078.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:58.890Z,1516702078.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:58.917Z,1516702078.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:07:58.918Z,1516702078.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:59.289Z,1516702079.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:59.320Z,1516702079.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:07:59.321Z,1516702079.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:07:59.703Z,1516702079.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:07:59.725Z,1516702079.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:07:59.726Z,1516702079.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:00.109Z,1516702080.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:00.134Z,1516702080.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:08:00.135Z,1516702080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:00.507Z,1516702080.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:00.522Z,1516702080.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:08:00.523Z,1516702080.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:00.889Z,1516702080.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:00.928Z,1516702080.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:08:00.929Z,1516702080.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:01.286Z,1516702081.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:01.309Z,1516702081.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:08:01.310Z,1516702081.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:01.722Z,1516702081.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:01.737Z,1516702081.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:08:01.738Z,1516702081.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:02.089Z,1516702082.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:02.125Z,1516702082.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:08:02.126Z,1516702082.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:02.512Z,1516702082.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:02.542Z,1516702082.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:08:02.543Z,1516702082.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:02.920Z,1516702082.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:02.934Z,1516702082.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:08:02.935Z,1516702082.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:03.299Z,1516702083.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:03.337Z,1516702083.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:08:03.338Z,1516702083.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:03.689Z,1516702083.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:03.724Z,1516702083.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:08:03.725Z,1516702083.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:04.089Z,1516702084.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:04.124Z,1516702084.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:08:04.125Z,1516702084.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:04.489Z,1516702084.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:04.528Z,1516702084.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:08:04.529Z,1516702084.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:04.894Z,1516702084.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:04.925Z,1516702084.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:05.297Z,1516702085.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:05.333Z,1516702085.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:05.700Z,1516702085.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:05.731Z,1516702085.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:06.104Z,1516702086.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:06.139Z,1516702086.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:06.512Z,1516702086.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:06.535Z,1516702086.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:06.898Z,1516702086.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:06.914Z,1516702086.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:07.294Z,1516702087.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:07.313Z,1516702087.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:07.694Z,1516702087.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:07.713Z,1516702087.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:08.093Z,1516702088.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:08.120Z,1516702088.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:08.506Z,1516702088.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:08.521Z,1516702088.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:08.905Z,1516702088.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:08.925Z,1516702088.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:09.307Z,1516702089.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:09.322Z,1516702089.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:09.697Z,1516702089.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:09.717Z,1516702089.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:10.097Z,1516702090.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:10.112Z,1516702090.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:10.492Z,1516702090.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:10.519Z,1516702090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:10.896Z,1516702090.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:10.916Z,1516702090.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:11.292Z,1516702091.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:11.323Z,1516702091.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:11.715Z,1516702091.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:11.730Z,1516702091.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:12.114Z,1516702092.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:12.137Z,1516702092.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:12.512Z,1516702092.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:12.527Z,1516702092.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:12.889Z,1516702092.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:12.917Z,1516702092.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:13.289Z,1516702093.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:13.321Z,1516702093.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:13.690Z,1516702093.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:13.729Z,1516702093.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:14.094Z,1516702094.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:14.121Z,1516702094.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:14.504Z,1516702094.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:14.534Z,1516702094.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:14.921Z,1516702094.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:14.941Z,1516702094.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:15.314Z,1516702095.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:15.329Z,1516702095.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:15.698Z,1516702095.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:15.726Z,1516702095.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:16.090Z,1516702096.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:16.125Z,1516702096.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:16.518Z,1516702096.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:16.541Z,1516702096.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:16.911Z,1516702096.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:16.937Z,1516702096.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:17.300Z,1516702097.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:17.337Z,1516702097.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:17.694Z,1516702097.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:17.726Z,1516702097.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:18.089Z,1516702098.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:18.109Z,1516702098.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:18.508Z,1516702098.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:18.536Z,1516702098.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:18.908Z,1516702098.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:18.938Z,1516702098.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:19.304Z,1516702099.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:19.335Z,1516702099.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:19.696Z,1516702099.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:19.712Z,1516702099.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:20.093Z,1516702100.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:20.131Z,1516702100.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:20.503Z,1516702100.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:20.519Z,1516702100.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:20.903Z,1516702100.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:20.918Z,1516702100.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:21.303Z,1516702101.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:21.317Z,1516702101.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:21.696Z,1516702101.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:21.715Z,1516702101.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:22.093Z,1516702102.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:22.120Z,1516702102.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:22.506Z,1516702102.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:22.521Z,1516702102.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:22.906Z,1516702102.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:22.925Z,1516702102.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:23.306Z,1516702103.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:23.325Z,1516702103.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:23.698Z,1516702103.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:23.713Z,1516702103.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:24.101Z,1516702104.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:24.116Z,1516702104.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:24.506Z,1516702104.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:24.529Z,1516702104.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:24.910Z,1516702104.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:24.925Z,1516702104.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:25.307Z,1516702105.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:25.322Z,1516702105.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:25.693Z,1516702105.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:25.716Z,1516702105.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:26.096Z,1516702106.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:26.122Z,1516702106.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:26.507Z,1516702106.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:26.522Z,1516702106.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:26.910Z,1516702106.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:26.925Z,1516702106.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:27.308Z,1516702107.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:27.325Z,1516702107.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:27.696Z,1516702107.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:27.716Z,1516702107.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:28.091Z,1516702108.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:28.123Z,1516702108.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:28.511Z,1516702108.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:28.526Z,1516702108.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:28.910Z,1516702108.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:28.929Z,1516702108.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:29.307Z,1516702109.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:29.322Z,1516702109.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:29.698Z,1516702109.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:29.713Z,1516702109.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:30.097Z,1516702110.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:30.117Z,1516702110.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:30.506Z,1516702110.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:30.521Z,1516702110.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:30.910Z,1516702110.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:30.932Z,1516702110.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:31.310Z,1516702111.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:31.325Z,1516702111.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:31.696Z,1516702111.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:31.716Z,1516702111.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:32.097Z,1516702112.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:32.116Z,1516702112.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:32.510Z,1516702112.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:32.525Z,1516702112.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:32.910Z,1516702112.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:32.925Z,1516702112.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:33.307Z,1516702113.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:33.322Z,1516702113.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:33.696Z,1516702113.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:33.716Z,1516702113.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:34.092Z,1516702114.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:34.123Z,1516702114.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:34.508Z,1516702114.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:34.522Z,1516702114.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:34.910Z,1516702114.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:34.925Z,1516702114.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:35.306Z,1516702115.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:35.321Z,1516702115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:35.698Z,1516702115.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:35.720Z,1516702115.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:36.101Z,1516702116.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:36.116Z,1516702116.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:36.506Z,1516702116.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:36.522Z,1516702116.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:36.910Z,1516702116.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:36.925Z,1516702116.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:37.307Z,1516702117.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:37.322Z,1516702117.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:37.693Z,1516702117.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:37.716Z,1516702117.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:38.097Z,1516702118.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:38.116Z,1516702118.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:38.510Z,1516702118.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:38.525Z,1516702118.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:38.910Z,1516702118.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:38.929Z,1516702118.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:39.307Z,1516702119.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:39.322Z,1516702119.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:39.705Z,1516702119.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:39.721Z,1516702119.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:40.091Z,1516702120.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:40.114Z,1516702120.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:40.508Z,1516702120.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:40.523Z,1516702120.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:40.910Z,1516702120.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:40.925Z,1516702120.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:41.307Z,1516702121.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:41.322Z,1516702121.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:41.698Z,1516702121.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:41.713Z,1516702121.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:42.097Z,1516702122.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:42.117Z,1516702122.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:42.510Z,1516702122.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:42.525Z,1516702122.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:42.911Z,1516702122.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:42.925Z,1516702122.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:43.311Z,1516702123.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:43.326Z,1516702123.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:43.693Z,1516702123.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:43.717Z,1516702123.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:44.092Z,1516702124.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:44.124Z,1516702124.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:44.507Z,1516702124.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:44.522Z,1516702124.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:44.912Z,1516702124.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:44.927Z,1516702124.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:45.308Z,1516702125.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:45.328Z,1516702125.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:48.385Z,1516702128.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:48.421Z,1516702128.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:48.525Z,1516702128.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:48.561Z,1516702128.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:48.892Z,1516702128.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:48.907Z,1516702128.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:49.299Z,1516702129.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:49.314Z,1516702129.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:49.694Z,1516702129.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:49.709Z,1516702129.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:50.070Z,1516702130.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:50.100Z,1516702130.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:50.466Z,1516702130.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:50.505Z,1516702130.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:50.870Z,1516702130.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:50.897Z,1516702130.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:51.264Z,1516702131.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:51.298Z,1516702131.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:51.694Z,1516702131.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:51.717Z,1516702131.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:52.092Z,1516702132.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:52.107Z,1516702132.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:52.486Z,1516702132.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:52.514Z,1516702132.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:52.863Z,1516702132.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:52.886Z,1516702132.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:53.265Z,1516702133.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:53.302Z,1516702133.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:53.669Z,1516702133.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:53.701Z,1516702133.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:54.064Z,1516702134.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:54.079Z,1516702134.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:54.464Z,1516702134.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:54.485Z,1516702134.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:54.884Z,1516702134.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:54.912Z,1516702134.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:55.280Z,1516702135.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:55.303Z,1516702135.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:55.688Z,1516702135.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:55.721Z,1516702135.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:56.076Z,1516702136.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:56.091Z,1516702136.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:56.473Z,1516702136.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:56.489Z,1516702136.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:56.872Z,1516702136.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:56.887Z,1516702136.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:57.271Z,1516702137.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:57.285Z,1516702137.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:57.684Z,1516702137.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:57.712Z,1516702137.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:58.079Z,1516702138.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:58.094Z,1516702138.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:58.477Z,1516702138.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:58.496Z,1516702138.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:58.871Z,1516702138.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:58.886Z,1516702138.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:59.272Z,1516702139.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:59.293Z,1516702139.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:08:59.676Z,1516702139.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:08:59.691Z,1516702139.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:00.074Z,1516702140.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:00.089Z,1516702140.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:00.472Z,1516702140.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:00.487Z,1516702140.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:00.877Z,1516702140.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:00.892Z,1516702140.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:01.279Z,1516702141.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:01.294Z,1516702141.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:01.680Z,1516702141.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:01.694Z,1516702141.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:02.072Z,1516702142.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:02.092Z,1516702142.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:02.477Z,1516702142.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:02.492Z,1516702142.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:02.872Z,1516702142.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:02.891Z,1516702142.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:03.277Z,1516702143.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:03.291Z,1516702143.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:03.680Z,1516702143.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:03.695Z,1516702143.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:04.079Z,1516702144.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:04.094Z,1516702144.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:04.478Z,1516702144.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:04.492Z,1516702144.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:04.870Z,1516702144.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:04.886Z,1516702144.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:05.272Z,1516702145.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:05.287Z,1516702145.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:05.672Z,1516702145.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:05.686Z,1516702145.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:06.074Z,1516702146.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:06.129Z,1516702146.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:06.472Z,1516702146.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:06.487Z,1516702146.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:06.877Z,1516702146.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:06.896Z,1516702146.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:07.278Z,1516702147.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:07.293Z,1516702147.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:07.691Z,1516702147.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:07.706Z,1516702147.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:08.072Z,1516702148.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:08.087Z,1516702148.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:08.477Z,1516702148.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:08.492Z,1516702148.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:08.869Z,1516702148.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:08.896Z,1516702148.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:09.276Z,1516702149.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:09.291Z,1516702149.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:09.686Z,1516702149.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:09.702Z,1516702149.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:10.086Z,1516702150.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:10.101Z,1516702150.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:10.482Z,1516702150.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:10.497Z,1516702150.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:10.862Z,1516702150.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:10.889Z,1516702150.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:11.271Z,1516702151.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:11.286Z,1516702151.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:11.676Z,1516702151.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:11.691Z,1516702151.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:12.071Z,1516702152.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:12.090Z,1516702152.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:12.467Z,1516702152.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:12.499Z,1516702152.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:12.882Z,1516702152.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:12.897Z,1516702152.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:13.283Z,1516702153.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:13.299Z,1516702153.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:13.687Z,1516702153.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:13.702Z,1516702153.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:14.076Z,1516702154.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:14.091Z,1516702154.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:14.472Z,1516702154.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:14.492Z,1516702154.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:14.871Z,1516702154.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:14.892Z,1516702154.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:15.272Z,1516702155.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:15.287Z,1516702155.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:15.687Z,1516702155.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:15.702Z,1516702155.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:16.087Z,1516702156.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:16.102Z,1516702156.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:16.481Z,1516702156.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:16.509Z,1516702156.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:16.862Z,1516702156.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:16.899Z,1516702156.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:17.285Z,1516702157.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:17.300Z,1516702157.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:17.681Z,1516702157.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:17.696Z,1516702157.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:18.079Z,1516702158.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:18.094Z,1516702158.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:18.465Z,1516702158.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:18.497Z,1516702158.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:18.887Z,1516702158.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:18.902Z,1516702158.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:19.291Z,1516702159.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:19.306Z,1516702159.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:19.691Z,1516702159.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:19.706Z,1516702159.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:20.064Z,1516702160.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:20.091Z,1516702160.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:20.481Z,1516702160.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:20.496Z,1516702160.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:20.875Z,1516702160.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:20.896Z,1516702160.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:21.264Z,1516702161.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:21.298Z,1516702161.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:21.690Z,1516702161.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:21.706Z,1516702161.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:22.087Z,1516702162.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:22.102Z,1516702162.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:22.486Z,1516702162.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:22.501Z,1516702162.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:22.862Z,1516702162.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:22.898Z,1516702162.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:23.265Z,1516702163.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:23.291Z,1516702163.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:23.677Z,1516702163.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:23.696Z,1516702163.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:24.071Z,1516702164.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:24.098Z,1516702164.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:24.480Z,1516702164.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:24.500Z,1516702164.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:24.882Z,1516702164.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:24.898Z,1516702164.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:25.284Z,1516702165.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:25.299Z,1516702165.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:25.694Z,1516702165.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:25.717Z,1516702165.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:26.080Z,1516702166.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:26.095Z,1516702166.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:26.468Z,1516702166.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:26.495Z,1516702166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:26.867Z,1516702166.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:26.903Z,1516702166.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:27.268Z,1516702167.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:27.302Z,1516702167.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:27.695Z,1516702167.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:27.710Z,1516702167.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:28.088Z,1516702168.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:28.102Z,1516702168.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:28.478Z,1516702168.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:28.510Z,1516702168.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:28.866Z,1516702168.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:28.897Z,1516702168.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:29.273Z,1516702169.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:29.300Z,1516702169.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:29.669Z,1516702169.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:29.695Z,1516702169.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:30.064Z,1516702170.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:30.096Z,1516702170.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:30.467Z,1516702170.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:30.504Z,1516702170.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:30.889Z,1516702170.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:30.904Z,1516702170.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:31.275Z,1516702171.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:31.306Z,1516702171.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:31.680Z,1516702171.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:31.715Z,1516702171.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:32.067Z,1516702172.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:32.082Z,1516702172.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:32.468Z,1516702172.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:32.483Z,1516702172.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:32.870Z,1516702172.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:32.885Z,1516702172.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:33.279Z,1516702173.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:33.294Z,1516702173.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:33.690Z,1516702173.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:33.718Z,1516702173.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:34.102Z,1516702174.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:34.118Z,1516702174.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:34.488Z,1516702174.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:34.510Z,1516702174.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:34.866Z,1516702174.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:34.885Z,1516702174.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:35.271Z,1516702175.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:35.293Z,1516702175.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:35.675Z,1516702175.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:35.690Z,1516702175.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:36.077Z,1516702176.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:36.093Z,1516702176.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:36.473Z,1516702176.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:36.489Z,1516702176.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:36.877Z,1516702176.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:36.891Z,1516702176.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:37.276Z,1516702177.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:37.292Z,1516702177.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:37.679Z,1516702177.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:37.694Z,1516702177.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:38.074Z,1516702178.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:38.090Z,1516702178.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:38.477Z,1516702178.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:38.492Z,1516702178.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:38.870Z,1516702178.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:38.901Z,1516702178.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:39.277Z,1516702179.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:39.291Z,1516702179.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:39.689Z,1516702179.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:39.716Z,1516702179.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:40.081Z,1516702180.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:40.101Z,1516702180.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:40.483Z,1516702180.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:40.504Z,1516702180.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:40.874Z,1516702180.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:40.889Z,1516702180.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:41.268Z,1516702181.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:41.301Z,1516702181.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:41.682Z,1516702181.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:41.697Z,1516702181.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:42.080Z,1516702182.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:42.095Z,1516702182.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:42.480Z,1516702182.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:42.501Z,1516702182.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:42.885Z,1516702182.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:42.899Z,1516702182.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:43.283Z,1516702183.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:43.304Z,1516702183.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:43.684Z,1516702183.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:43.703Z,1516702183.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:44.067Z,1516702184.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:44.101Z,1516702184.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:44.464Z,1516702184.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:44.509Z,1516702184.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:44.512Z,1516702184.512 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T10:09:44.512Z,1516702184.512 [Default:CheckIn:C.Wait] Stopped 2018-01-23T10:09:44.512Z,1516702184.512 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T10:09:44.512Z,1516702184.512 [Default:CheckIn:D] Running Loop=1 2018-01-23T10:09:44.865Z,1516702184.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:44.886Z,1516702184.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x11927 got:0x25546 2018-01-23T10:09:44.912Z,1516702184.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:44.915Z,1516702184.915 [Default:CheckIn:D] Stopped 2018-01-23T10:09:44.915Z,1516702184.915 [Default:CheckIn:E] Running Loop=1 2018-01-23T10:09:45.267Z,1516702185.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:45.293Z,1516702185.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:45.296Z,1516702185.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 411.880924 min 2018-01-23T10:09:45.296Z,1516702185.296 [Default:CheckIn:E] Stopped 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn] Stopped 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn](INFO): Running loop #41 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn] Running Loop=41 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T10:09:45.297Z,1516702185.297 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T10:09:45.700Z,1516702185.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:45.715Z,1516702185.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:48.789Z,1516702188.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:48.804Z,1516702188.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:48.924Z,1516702188.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:48.953Z,1516702188.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:49.253Z,1516702189.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:49.288Z,1516702189.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:49.661Z,1516702189.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:49.676Z,1516702189.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:50.054Z,1516702190.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:50.072Z,1516702190.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:50.454Z,1516702190.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:50.477Z,1516702190.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:50.863Z,1516702190.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:50.902Z,1516702190.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:51.271Z,1516702191.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:51.302Z,1516702191.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:51.663Z,1516702191.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:51.682Z,1516702191.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:52.058Z,1516702192.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:52.076Z,1516702192.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:52.455Z,1516702192.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:52.478Z,1516702192.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:52.861Z,1516702192.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:52.876Z,1516702192.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:53.258Z,1516702193.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:53.274Z,1516702193.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:53.663Z,1516702193.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:53.681Z,1516702193.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:54.063Z,1516702194.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:54.107Z,1516702194.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:54.463Z,1516702194.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:54.486Z,1516702194.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:54.861Z,1516702194.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:54.878Z,1516702194.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:55.257Z,1516702195.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:55.276Z,1516702195.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:55.663Z,1516702195.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:55.678Z,1516702195.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:56.064Z,1516702196.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:56.079Z,1516702196.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:56.462Z,1516702196.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:56.478Z,1516702196.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:56.858Z,1516702196.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:56.877Z,1516702196.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:57.256Z,1516702197.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:57.272Z,1516702197.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:57.673Z,1516702197.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:57.702Z,1516702197.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:58.070Z,1516702198.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:58.090Z,1516702198.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:58.467Z,1516702198.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:58.485Z,1516702198.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:58.855Z,1516702198.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:58.883Z,1516702198.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:59.248Z,1516702199.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:59.275Z,1516702199.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:09:59.667Z,1516702199.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:09:59.684Z,1516702199.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:00.071Z,1516702200.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:00.089Z,1516702200.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:00.472Z,1516702200.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:00.486Z,1516702200.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:00.865Z,1516702200.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:00.881Z,1516702200.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:01.248Z,1516702201.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:01.280Z,1516702201.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:01.671Z,1516702201.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:01.696Z,1516702201.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:02.073Z,1516702202.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:02.093Z,1516702202.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:02.466Z,1516702202.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:02.489Z,1516702202.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:02.849Z,1516702202.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:02.876Z,1516702202.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:03.252Z,1516702203.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:03.281Z,1516702203.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:03.666Z,1516702203.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:03.681Z,1516702203.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:04.071Z,1516702204.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:04.086Z,1516702204.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:04.468Z,1516702204.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:04.483Z,1516702204.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:04.849Z,1516702204.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:04.882Z,1516702204.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:05.248Z,1516702205.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:05.287Z,1516702205.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:05.676Z,1516702205.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:05.691Z,1516702205.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:06.063Z,1516702206.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:06.108Z,1516702206.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:06.470Z,1516702206.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:06.500Z,1516702206.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:06.858Z,1516702206.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:06.893Z,1516702206.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:07.261Z,1516702207.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:07.297Z,1516702207.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:07.668Z,1516702207.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:07.696Z,1516702207.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:08.072Z,1516702208.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:08.102Z,1516702208.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:08.472Z,1516702208.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:08.499Z,1516702208.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:08.853Z,1516702208.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:08.868Z,1516702208.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:09.253Z,1516702209.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:09.273Z,1516702209.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:09.672Z,1516702209.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:09.708Z,1516702209.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:10.063Z,1516702210.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:10.078Z,1516702210.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:10.462Z,1516702210.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:10.477Z,1516702210.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:10.863Z,1516702210.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:10.878Z,1516702210.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:11.257Z,1516702211.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:11.273Z,1516702211.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:11.662Z,1516702211.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:11.678Z,1516702211.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:12.063Z,1516702212.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:12.085Z,1516702212.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:12.466Z,1516702212.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:12.482Z,1516702212.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:12.853Z,1516702212.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:12.876Z,1516702212.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:13.252Z,1516702213.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:13.274Z,1516702213.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:13.667Z,1516702213.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:13.681Z,1516702213.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:14.065Z,1516702214.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:14.085Z,1516702214.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:14.466Z,1516702214.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:14.481Z,1516702214.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:14.858Z,1516702214.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:14.872Z,1516702214.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:15.246Z,1516702215.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:15.278Z,1516702215.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:15.668Z,1516702215.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:15.683Z,1516702215.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:16.071Z,1516702216.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:16.086Z,1516702216.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:16.467Z,1516702216.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:16.482Z,1516702216.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:16.849Z,1516702216.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:16.881Z,1516702216.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:17.248Z,1516702217.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:17.283Z,1516702217.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:17.667Z,1516702217.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:17.682Z,1516702217.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:18.070Z,1516702218.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:18.085Z,1516702218.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:18.466Z,1516702218.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:18.493Z,1516702218.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:18.849Z,1516702218.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:18.881Z,1516702218.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:19.248Z,1516702219.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:19.281Z,1516702219.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:19.668Z,1516702219.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:19.682Z,1516702219.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:20.071Z,1516702220.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:20.086Z,1516702220.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:20.474Z,1516702220.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:20.489Z,1516702220.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:20.849Z,1516702220.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:20.875Z,1516702220.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:21.246Z,1516702221.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:21.281Z,1516702221.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:21.670Z,1516702221.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:21.686Z,1516702221.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:22.072Z,1516702222.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:22.086Z,1516702222.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:22.467Z,1516702222.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:22.482Z,1516702222.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:22.849Z,1516702222.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:22.881Z,1516702222.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:23.248Z,1516702223.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:23.283Z,1516702223.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:23.671Z,1516702223.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:23.686Z,1516702223.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:24.070Z,1516702224.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:24.085Z,1516702224.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:24.466Z,1516702224.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:24.496Z,1516702224.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:24.849Z,1516702224.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:24.876Z,1516702224.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:25.247Z,1516702225.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:25.281Z,1516702225.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:25.668Z,1516702225.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:25.683Z,1516702225.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:26.066Z,1516702226.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:26.081Z,1516702226.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:26.464Z,1516702226.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:26.491Z,1516702226.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:26.853Z,1516702226.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:26.888Z,1516702226.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:27.246Z,1516702227.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:27.269Z,1516702227.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:27.667Z,1516702227.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:27.682Z,1516702227.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:28.071Z,1516702228.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:28.086Z,1516702228.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:28.467Z,1516702228.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:28.482Z,1516702228.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:28.849Z,1516702228.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:28.881Z,1516702228.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:29.248Z,1516702229.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:29.285Z,1516702229.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:29.671Z,1516702229.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:29.686Z,1516702229.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:30.079Z,1516702230.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:30.101Z,1516702230.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:30.472Z,1516702230.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:30.487Z,1516702230.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:30.846Z,1516702230.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:30.870Z,1516702230.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:31.257Z,1516702231.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:31.284Z,1516702231.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:31.649Z,1516702231.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:31.685Z,1516702231.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:32.059Z,1516702232.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:32.097Z,1516702232.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:32.476Z,1516702232.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:32.492Z,1516702232.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:32.860Z,1516702232.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:32.886Z,1516702232.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:33.249Z,1516702233.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:33.281Z,1516702233.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:33.655Z,1516702233.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:33.675Z,1516702233.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:34.057Z,1516702234.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:34.076Z,1516702234.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:34.457Z,1516702234.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:34.473Z,1516702234.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:34.859Z,1516702234.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:34.875Z,1516702234.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:35.263Z,1516702235.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:35.278Z,1516702235.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:35.660Z,1516702235.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:35.674Z,1516702235.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:36.055Z,1516702236.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:36.070Z,1516702236.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:36.457Z,1516702236.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:36.471Z,1516702236.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:36.852Z,1516702236.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:36.879Z,1516702236.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:37.256Z,1516702237.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:37.274Z,1516702237.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:37.657Z,1516702237.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:37.672Z,1516702237.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:38.061Z,1516702238.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:38.081Z,1516702238.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:38.467Z,1516702238.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:38.482Z,1516702238.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:38.863Z,1516702238.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:38.884Z,1516702238.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:39.253Z,1516702239.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:39.272Z,1516702239.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:39.660Z,1516702239.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:39.681Z,1516702239.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:40.058Z,1516702240.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:40.072Z,1516702240.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:40.456Z,1516702240.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:40.471Z,1516702240.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:40.862Z,1516702240.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:40.881Z,1516702240.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:41.263Z,1516702241.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:41.277Z,1516702241.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:41.662Z,1516702241.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:41.678Z,1516702241.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:42.057Z,1516702242.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:42.072Z,1516702242.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:42.457Z,1516702242.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:42.472Z,1516702242.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:42.852Z,1516702242.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:42.873Z,1516702242.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:43.253Z,1516702243.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:43.280Z,1516702243.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:43.664Z,1516702243.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:43.679Z,1516702243.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:44.063Z,1516702244.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:44.091Z,1516702244.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:44.471Z,1516702244.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:44.486Z,1516702244.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:44.868Z,1516702244.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:44.883Z,1516702244.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:45.253Z,1516702245.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:45.283Z,1516702245.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:45.658Z,1516702245.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:45.673Z,1516702245.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:46.060Z,1516702246.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:46.080Z,1516702246.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:49.152Z,1516702249.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:49.168Z,1516702249.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:49.168Z,1516702249.168 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138 2018-01-23T10:10:49.168Z,1516702249.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:10:49.170Z,1516702249.170 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:49.170Z,1516702249.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 138 2018-01-23T10:10:49.170Z,1516702249.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:10:49.172Z,1516702249.172 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:49.172Z,1516702249.172 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138 2018-01-23T10:10:49.172Z,1516702249.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:10:49.184Z,1516702249.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:10:49.184Z,1516702249.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:10:49.184Z,1516702249.184 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:10:49.292Z,1516702249.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:49.345Z,1516702249.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:10:49.345Z,1516702249.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138 2018-01-23T10:10:49.345Z,1516702249.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:10:49.345Z,1516702249.345 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 138 2018-01-23T10:10:49.346Z,1516702249.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:10:49.346Z,1516702249.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138 2018-01-23T10:10:49.632Z,1516702249.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:49.670Z,1516702249.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:10:49.670Z,1516702249.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:10:49.670Z,1516702249.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:10:49.671Z,1516702249.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:10:49.671Z,1516702249.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:10:49.672Z,1516702249.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:10:49.672Z,1516702249.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:10:49.672Z,1516702249.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:10:49.673Z,1516702249.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:10:50.034Z,1516702250.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:50.049Z,1516702250.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T10:10:50.050Z,1516702250.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:50.416Z,1516702250.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:50.445Z,1516702250.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T10:10:50.446Z,1516702250.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:50.812Z,1516702250.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:50.844Z,1516702250.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T10:10:50.845Z,1516702250.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:51.213Z,1516702251.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:51.248Z,1516702251.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T10:10:51.248Z,1516702251.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:51.624Z,1516702251.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:51.649Z,1516702251.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T10:10:51.650Z,1516702251.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:52.032Z,1516702252.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:52.046Z,1516702252.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T10:10:52.047Z,1516702252.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:52.436Z,1516702252.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:52.449Z,1516702252.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T10:10:52.450Z,1516702252.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:52.828Z,1516702252.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:52.851Z,1516702252.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T10:10:52.852Z,1516702252.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:53.212Z,1516702253.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:53.238Z,1516702253.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T10:10:53.239Z,1516702253.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:53.611Z,1516702253.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:53.644Z,1516702253.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T10:10:53.645Z,1516702253.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:54.013Z,1516702254.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:54.044Z,1516702254.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T10:10:54.045Z,1516702254.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:54.412Z,1516702254.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:54.448Z,1516702254.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T10:10:54.449Z,1516702254.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:54.823Z,1516702254.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:54.857Z,1516702254.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T10:10:54.858Z,1516702254.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:55.223Z,1516702255.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:55.256Z,1516702255.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T10:10:55.257Z,1516702255.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:55.623Z,1516702255.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:55.658Z,1516702255.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T10:10:55.659Z,1516702255.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:56.012Z,1516702256.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:56.048Z,1516702256.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T10:10:56.049Z,1516702256.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:56.412Z,1516702256.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:56.448Z,1516702256.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T10:10:56.449Z,1516702256.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:56.820Z,1516702256.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:56.846Z,1516702256.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T10:10:56.847Z,1516702256.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:57.222Z,1516702257.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:57.256Z,1516702257.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T10:10:57.257Z,1516702257.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:57.622Z,1516702257.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:57.636Z,1516702257.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T10:10:57.637Z,1516702257.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:58.028Z,1516702258.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:58.042Z,1516702258.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T10:10:58.043Z,1516702258.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:58.427Z,1516702258.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:58.441Z,1516702258.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T10:10:58.442Z,1516702258.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:58.823Z,1516702258.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:58.838Z,1516702258.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T10:10:58.839Z,1516702258.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:59.219Z,1516702259.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:59.234Z,1516702259.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T10:10:59.235Z,1516702259.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:10:59.620Z,1516702259.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:10:59.641Z,1516702259.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T10:10:59.641Z,1516702259.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:00.018Z,1516702260.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:00.045Z,1516702260.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T10:11:00.046Z,1516702260.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:00.424Z,1516702260.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:00.441Z,1516702260.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T10:11:00.441Z,1516702260.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:00.826Z,1516702260.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:00.841Z,1516702260.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T10:11:00.842Z,1516702260.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:01.225Z,1516702261.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:01.241Z,1516702261.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T10:11:01.241Z,1516702261.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:01.626Z,1516702261.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:01.643Z,1516702261.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T10:11:01.644Z,1516702261.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:02.021Z,1516702262.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:02.036Z,1516702262.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T10:11:02.037Z,1516702262.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:02.417Z,1516702262.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:02.440Z,1516702262.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T10:11:02.441Z,1516702262.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:02.824Z,1516702262.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:02.841Z,1516702262.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T10:11:02.841Z,1516702262.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:03.222Z,1516702263.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:03.240Z,1516702263.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T10:11:03.241Z,1516702263.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:03.620Z,1516702263.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:03.635Z,1516702263.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T10:11:03.636Z,1516702263.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:04.030Z,1516702264.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:04.045Z,1516702264.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T10:11:04.046Z,1516702264.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:04.431Z,1516702264.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:04.445Z,1516702264.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T10:11:04.446Z,1516702264.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:04.828Z,1516702264.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:04.851Z,1516702264.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T10:11:04.852Z,1516702264.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:05.216Z,1516702265.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:05.239Z,1516702265.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T10:11:05.240Z,1516702265.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:05.621Z,1516702265.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:05.641Z,1516702265.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T10:11:05.642Z,1516702265.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:06.020Z,1516702266.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:06.040Z,1516702266.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T10:11:06.041Z,1516702266.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:06.423Z,1516702266.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:06.438Z,1516702266.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T10:11:06.439Z,1516702266.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:06.832Z,1516702266.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:06.847Z,1516702266.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T10:11:06.848Z,1516702266.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:07.230Z,1516702267.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:07.260Z,1516702267.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T10:11:07.261Z,1516702267.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:07.635Z,1516702267.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:07.730Z,1516702267.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s. 2018-01-23T10:11:07.736Z,1516702267.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:08.013Z,1516702268.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:08.040Z,1516702268.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T10:11:08.040Z,1516702268.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:08.413Z,1516702268.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:08.445Z,1516702268.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T10:11:08.446Z,1516702268.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:08.813Z,1516702268.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:08.845Z,1516702268.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T10:11:08.846Z,1516702268.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:09.213Z,1516702269.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:09.246Z,1516702269.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:09.612Z,1516702269.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:09.641Z,1516702269.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:10.032Z,1516702270.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:10.053Z,1516702270.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:10.436Z,1516702270.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:10.451Z,1516702270.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:10.828Z,1516702270.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:10.856Z,1516702270.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:11.216Z,1516702271.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:11.243Z,1516702271.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:11.612Z,1516702271.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:11.639Z,1516702271.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:12.013Z,1516702272.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:12.040Z,1516702272.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:12.412Z,1516702272.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:12.449Z,1516702272.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:12.836Z,1516702272.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:12.851Z,1516702272.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:13.227Z,1516702273.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:13.249Z,1516702273.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:13.631Z,1516702273.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:13.657Z,1516702273.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:14.012Z,1516702274.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:14.046Z,1516702274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:14.416Z,1516702274.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:14.443Z,1516702274.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:14.812Z,1516702274.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:14.845Z,1516702274.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:15.217Z,1516702275.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:15.249Z,1516702275.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:15.612Z,1516702275.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:15.649Z,1516702275.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:16.040Z,1516702276.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:16.055Z,1516702276.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:16.444Z,1516702276.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:16.458Z,1516702276.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:16.824Z,1516702276.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:16.855Z,1516702276.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:17.212Z,1516702277.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:17.233Z,1516702277.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:17.620Z,1516702277.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:17.635Z,1516702277.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:18.021Z,1516702278.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:18.037Z,1516702278.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:18.420Z,1516702278.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:18.441Z,1516702278.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:18.835Z,1516702278.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:18.879Z,1516702278.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:19.231Z,1516702279.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:19.246Z,1516702279.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:19.630Z,1516702279.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:19.645Z,1516702279.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:20.022Z,1516702280.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:20.037Z,1516702280.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:20.420Z,1516702280.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:20.441Z,1516702280.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:20.820Z,1516702280.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:20.840Z,1516702280.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:21.223Z,1516702281.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:21.238Z,1516702281.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:21.622Z,1516702281.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:21.638Z,1516702281.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:22.028Z,1516702282.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:22.055Z,1516702282.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:22.436Z,1516702282.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:22.450Z,1516702282.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:22.837Z,1516702282.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:22.852Z,1516702282.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:23.217Z,1516702283.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:23.248Z,1516702283.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:23.613Z,1516702283.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:23.641Z,1516702283.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:24.014Z,1516702284.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:24.046Z,1516702284.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:24.412Z,1516702284.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:24.449Z,1516702284.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:24.837Z,1516702284.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:24.853Z,1516702284.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:25.227Z,1516702285.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:25.275Z,1516702285.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:25.636Z,1516702285.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:25.654Z,1516702285.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:26.013Z,1516702286.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:26.046Z,1516702286.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:26.417Z,1516702286.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:26.443Z,1516702286.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:26.812Z,1516702286.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:26.845Z,1516702286.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:27.217Z,1516702287.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:27.250Z,1516702287.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:27.612Z,1516702287.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:27.650Z,1516702287.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:28.023Z,1516702288.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:28.058Z,1516702288.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:28.437Z,1516702288.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:28.451Z,1516702288.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:28.823Z,1516702288.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:28.857Z,1516702288.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:29.216Z,1516702289.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:29.248Z,1516702289.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:29.612Z,1516702289.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:29.650Z,1516702289.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:30.017Z,1516702290.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:30.049Z,1516702290.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:30.412Z,1516702290.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:30.448Z,1516702290.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:30.823Z,1516702290.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:30.857Z,1516702290.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:31.223Z,1516702291.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:31.250Z,1516702291.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:31.631Z,1516702291.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:31.656Z,1516702291.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:32.017Z,1516702292.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:32.036Z,1516702292.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:32.413Z,1516702292.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:32.433Z,1516702292.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:32.817Z,1516702292.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:32.832Z,1516702292.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:33.217Z,1516702293.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:33.232Z,1516702293.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:33.624Z,1516702293.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:33.666Z,1516702293.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:34.035Z,1516702294.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:34.060Z,1516702294.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:34.439Z,1516702294.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:34.464Z,1516702294.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:34.827Z,1516702294.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:34.842Z,1516702294.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:35.221Z,1516702295.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:35.241Z,1516702295.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:35.621Z,1516702295.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:35.636Z,1516702295.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:36.020Z,1516702296.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:36.035Z,1516702296.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:36.428Z,1516702296.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:36.469Z,1516702296.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:36.823Z,1516702296.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:36.838Z,1516702296.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:37.223Z,1516702297.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:37.238Z,1516702297.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:37.624Z,1516702297.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:37.639Z,1516702297.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:38.020Z,1516702298.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:38.034Z,1516702298.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:38.420Z,1516702298.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:38.434Z,1516702298.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:38.819Z,1516702298.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:38.834Z,1516702298.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:39.221Z,1516702299.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:39.235Z,1516702299.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:39.621Z,1516702299.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:39.637Z,1516702299.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:40.023Z,1516702300.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:40.039Z,1516702300.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:40.427Z,1516702300.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:40.441Z,1516702300.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:40.824Z,1516702300.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:40.838Z,1516702300.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:41.220Z,1516702301.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:41.235Z,1516702301.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:41.620Z,1516702301.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:41.634Z,1516702301.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:42.017Z,1516702302.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:42.039Z,1516702302.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:42.416Z,1516702302.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:42.437Z,1516702302.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:42.832Z,1516702302.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:42.847Z,1516702302.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:43.230Z,1516702303.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:43.246Z,1516702303.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:43.631Z,1516702303.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:43.646Z,1516702303.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:44.021Z,1516702304.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:44.040Z,1516702304.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:44.424Z,1516702304.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:44.440Z,1516702304.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:44.835Z,1516702304.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:44.851Z,1516702304.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:45.235Z,1516702305.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:45.257Z,1516702305.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:45.635Z,1516702305.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:45.650Z,1516702305.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:46.022Z,1516702306.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:46.037Z,1516702306.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:46.428Z,1516702306.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:46.443Z,1516702306.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:49.533Z,1516702309.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:49.553Z,1516702309.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:49.678Z,1516702309.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:49.713Z,1516702309.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:50.034Z,1516702310.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:50.049Z,1516702310.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:50.429Z,1516702310.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:50.444Z,1516702310.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:50.823Z,1516702310.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:50.842Z,1516702310.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:51.220Z,1516702311.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:51.252Z,1516702311.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:51.629Z,1516702311.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:51.644Z,1516702311.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:52.034Z,1516702312.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:52.050Z,1516702312.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:52.438Z,1516702312.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:52.453Z,1516702312.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:52.834Z,1516702312.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:52.850Z,1516702312.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:53.219Z,1516702313.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:53.242Z,1516702313.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:53.619Z,1516702313.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:53.652Z,1516702313.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:54.026Z,1516702314.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:54.041Z,1516702314.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:54.419Z,1516702314.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:54.451Z,1516702314.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:54.838Z,1516702314.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:54.857Z,1516702314.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:55.239Z,1516702315.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:55.254Z,1516702315.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:55.635Z,1516702315.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:55.657Z,1516702315.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:56.030Z,1516702316.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:56.053Z,1516702316.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:56.429Z,1516702316.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:56.445Z,1516702316.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:56.834Z,1516702316.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:56.850Z,1516702316.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:57.247Z,1516702317.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:57.263Z,1516702317.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:57.636Z,1516702317.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:57.659Z,1516702317.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:58.018Z,1516702318.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:58.046Z,1516702318.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:58.421Z,1516702318.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:58.453Z,1516702318.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:58.828Z,1516702318.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:58.866Z,1516702318.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:59.235Z,1516702319.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:59.258Z,1516702319.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:11:59.627Z,1516702319.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:11:59.666Z,1516702319.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:00.017Z,1516702320.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:00.045Z,1516702320.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:00.416Z,1516702320.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:00.457Z,1516702320.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:00.831Z,1516702320.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:00.859Z,1516702320.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:01.231Z,1516702321.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:01.262Z,1516702321.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:01.640Z,1516702321.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:01.673Z,1516702321.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:02.029Z,1516702322.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:02.064Z,1516702322.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:02.422Z,1516702322.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:02.437Z,1516702322.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:02.835Z,1516702322.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:02.866Z,1516702322.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:03.235Z,1516702323.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:03.250Z,1516702323.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:03.640Z,1516702323.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:03.671Z,1516702323.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:04.024Z,1516702324.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:04.052Z,1516702324.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:04.429Z,1516702324.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:04.444Z,1516702324.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:04.835Z,1516702324.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:04.850Z,1516702324.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:05.235Z,1516702325.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:05.250Z,1516702325.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:05.634Z,1516702325.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:05.650Z,1516702325.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:06.026Z,1516702326.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:06.042Z,1516702326.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:06.420Z,1516702326.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:06.443Z,1516702326.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:06.835Z,1516702326.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:06.851Z,1516702326.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:07.238Z,1516702327.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:07.254Z,1516702327.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:07.635Z,1516702327.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:07.650Z,1516702327.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:08.025Z,1516702328.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:08.044Z,1516702328.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:08.426Z,1516702328.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:08.441Z,1516702328.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:08.834Z,1516702328.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:08.849Z,1516702328.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:09.237Z,1516702329.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:09.257Z,1516702329.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:09.640Z,1516702329.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:09.665Z,1516702329.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:10.029Z,1516702330.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:10.044Z,1516702330.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:10.416Z,1516702330.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:10.451Z,1516702330.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:10.836Z,1516702330.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:10.851Z,1516702330.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:11.238Z,1516702331.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:11.253Z,1516702331.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:11.633Z,1516702331.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:11.658Z,1516702331.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:12.017Z,1516702332.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:12.044Z,1516702332.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:12.416Z,1516702332.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:12.449Z,1516702332.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:12.835Z,1516702332.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:12.850Z,1516702332.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:13.240Z,1516702333.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:13.255Z,1516702333.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:13.635Z,1516702333.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:13.651Z,1516702333.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:14.017Z,1516702334.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:14.051Z,1516702334.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:14.429Z,1516702334.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:14.444Z,1516702334.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:14.832Z,1516702334.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:14.859Z,1516702334.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:15.243Z,1516702335.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:15.258Z,1516702335.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:15.643Z,1516702335.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:15.672Z,1516702335.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:16.021Z,1516702336.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:16.047Z,1516702336.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:16.416Z,1516702336.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:16.448Z,1516702336.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:16.840Z,1516702336.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:16.856Z,1516702336.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:17.242Z,1516702337.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:17.266Z,1516702337.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:17.636Z,1516702337.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:17.651Z,1516702337.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:18.017Z,1516702338.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:18.049Z,1516702338.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:18.420Z,1516702338.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:18.453Z,1516702338.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:18.827Z,1516702338.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:18.861Z,1516702338.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:19.249Z,1516702339.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:19.264Z,1516702339.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:19.647Z,1516702339.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:19.663Z,1516702339.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:20.029Z,1516702340.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:20.060Z,1516702340.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:20.422Z,1516702340.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:20.437Z,1516702340.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:20.835Z,1516702340.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:20.861Z,1516702340.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:21.235Z,1516702341.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:21.263Z,1516702341.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:21.634Z,1516702341.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:21.677Z,1516702341.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:22.025Z,1516702342.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:22.040Z,1516702342.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:22.421Z,1516702342.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:22.436Z,1516702342.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:22.835Z,1516702342.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:22.866Z,1516702342.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:23.239Z,1516702343.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:23.272Z,1516702343.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:23.639Z,1516702343.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:23.668Z,1516702343.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:24.027Z,1516702344.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:24.042Z,1516702344.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:24.422Z,1516702344.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:24.445Z,1516702344.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:24.809Z,1516702344.809 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:12:24.809Z,1516702344.809 [NAL9602] Data Fault, FailCount= 3 2018-01-23T10:12:24.809Z,1516702344.809 [NAL9602](ERROR): Data Fault 2018-01-23T10:12:24.826Z,1516702344.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:24.841Z,1516702344.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:24.890Z,1516702344.890 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:12:25.200Z,1516702345.200 [NAL9602](INFO): Powering down 2018-01-23T10:12:25.222Z,1516702345.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:25.246Z,1516702345.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:25.624Z,1516702345.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:25.639Z,1516702345.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:26.021Z,1516702346.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:26.036Z,1516702346.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:26.049Z,1516702346.049 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:12:26.049Z,1516702346.049 [NAL9602] No Fault, FailCount= 3 2018-01-23T10:12:26.424Z,1516702346.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:26.439Z,1516702346.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:26.824Z,1516702346.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:26.839Z,1516702346.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:27.221Z,1516702347.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:27.236Z,1516702347.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:27.622Z,1516702347.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:27.647Z,1516702347.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:28.024Z,1516702348.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:28.038Z,1516702348.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:28.428Z,1516702348.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:28.442Z,1516702348.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:28.828Z,1516702348.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:28.843Z,1516702348.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:29.224Z,1516702349.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:29.244Z,1516702349.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:29.628Z,1516702349.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:29.643Z,1516702349.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:30.028Z,1516702350.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:30.043Z,1516702350.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:30.418Z,1516702350.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:30.450Z,1516702350.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:30.821Z,1516702350.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:30.836Z,1516702350.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:31.224Z,1516702351.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:31.239Z,1516702351.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:31.618Z,1516702351.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:31.650Z,1516702351.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:32.021Z,1516702352.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:32.036Z,1516702352.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:32.420Z,1516702352.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:32.441Z,1516702352.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:32.831Z,1516702352.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:32.846Z,1516702352.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:33.221Z,1516702353.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:33.236Z,1516702353.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:33.625Z,1516702353.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:33.645Z,1516702353.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:34.019Z,1516702354.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:34.049Z,1516702354.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:34.424Z,1516702354.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:34.439Z,1516702354.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:34.823Z,1516702354.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:34.839Z,1516702354.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:35.219Z,1516702355.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:35.252Z,1516702355.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:35.624Z,1516702355.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:35.639Z,1516702355.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:36.032Z,1516702356.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:36.053Z,1516702356.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:36.421Z,1516702356.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:36.447Z,1516702356.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:36.817Z,1516702356.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:36.851Z,1516702356.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:37.221Z,1516702357.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:37.248Z,1516702357.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:37.616Z,1516702357.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:37.643Z,1516702357.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:38.016Z,1516702358.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:38.051Z,1516702358.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:38.416Z,1516702358.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:38.443Z,1516702358.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:38.816Z,1516702358.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:38.853Z,1516702358.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:39.220Z,1516702359.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:39.247Z,1516702359.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:39.620Z,1516702359.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:39.648Z,1516702359.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:40.015Z,1516702360.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:40.047Z,1516702360.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:40.420Z,1516702360.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:40.455Z,1516702360.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:40.820Z,1516702360.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:40.853Z,1516702360.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:41.215Z,1516702361.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:41.230Z,1516702361.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:41.616Z,1516702361.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:41.654Z,1516702361.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:42.018Z,1516702362.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:42.041Z,1516702362.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:42.424Z,1516702362.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:42.439Z,1516702362.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:42.825Z,1516702362.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:42.840Z,1516702362.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:43.225Z,1516702363.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:43.241Z,1516702363.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:43.623Z,1516702363.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:43.643Z,1516702363.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:44.024Z,1516702364.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:44.044Z,1516702364.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:44.424Z,1516702364.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:44.439Z,1516702364.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:44.822Z,1516702364.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:44.846Z,1516702364.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:45.224Z,1516702365.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:45.239Z,1516702365.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:45.624Z,1516702365.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:45.640Z,1516702365.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:46.022Z,1516702366.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:46.049Z,1516702366.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:46.417Z,1516702366.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:46.443Z,1516702366.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:49.530Z,1516702369.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:49.547Z,1516702369.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:49.658Z,1516702369.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:49.692Z,1516702369.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:50.004Z,1516702370.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:50.018Z,1516702370.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:50.404Z,1516702370.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:50.442Z,1516702370.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:50.800Z,1516702370.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:50.815Z,1516702370.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:51.196Z,1516702371.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:51.211Z,1516702371.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:51.600Z,1516702371.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:51.615Z,1516702371.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:52.004Z,1516702372.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:52.019Z,1516702372.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:52.400Z,1516702372.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:52.415Z,1516702372.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:52.796Z,1516702372.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:52.811Z,1516702372.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:53.196Z,1516702373.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:53.220Z,1516702373.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:53.604Z,1516702373.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:53.619Z,1516702373.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:54.000Z,1516702374.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:54.015Z,1516702374.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:54.399Z,1516702374.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:54.414Z,1516702374.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:54.799Z,1516702374.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:54.813Z,1516702374.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:55.200Z,1516702375.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:55.215Z,1516702375.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:55.584Z,1516702375.584 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:12:55.602Z,1516702375.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:55.625Z,1516702375.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:55.000Z,1516702376.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:56.014Z,1516702376.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:56.400Z,1516702376.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:56.415Z,1516702376.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:56.806Z,1516702376.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:56.821Z,1516702376.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:57.205Z,1516702377.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:57.220Z,1516702377.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:57.605Z,1516702377.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:57.620Z,1516702377.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:58.000Z,1516702378.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:58.016Z,1516702378.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:58.403Z,1516702378.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:58.417Z,1516702378.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:58.803Z,1516702378.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:58.818Z,1516702378.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:59.205Z,1516702379.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:59.220Z,1516702379.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:12:59.600Z,1516702379.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:12:59.615Z,1516702379.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:00.004Z,1516702380.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:00.018Z,1516702380.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:00.403Z,1516702380.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:00.418Z,1516702380.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:00.806Z,1516702380.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:00.820Z,1516702380.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:01.194Z,1516702381.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:01.221Z,1516702381.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:01.604Z,1516702381.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:01.619Z,1516702381.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:02.003Z,1516702382.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:02.017Z,1516702382.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:02.405Z,1516702382.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:02.420Z,1516702382.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:02.806Z,1516702382.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:02.821Z,1516702382.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:03.207Z,1516702383.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:03.222Z,1516702383.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:03.602Z,1516702383.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:03.617Z,1516702383.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:04.005Z,1516702384.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:04.021Z,1516702384.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:04.405Z,1516702384.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:04.420Z,1516702384.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:04.800Z,1516702384.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:04.816Z,1516702384.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:05.197Z,1516702385.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:05.221Z,1516702385.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:05.604Z,1516702385.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:05.618Z,1516702385.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:06.001Z,1516702386.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:06.016Z,1516702386.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:06.541Z,1516702386.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:06.563Z,1516702386.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:06.776Z,1516702386.776 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:13:06.798Z,1516702386.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:06.828Z,1516702386.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:07.202Z,1516702387.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:07.217Z,1516702387.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:07.612Z,1516702387.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:07.627Z,1516702387.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:08.016Z,1516702388.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:08.031Z,1516702388.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:08.412Z,1516702388.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:08.432Z,1516702388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:08.804Z,1516702388.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:08.819Z,1516702388.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:09.212Z,1516702389.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:09.227Z,1516702389.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:09.604Z,1516702389.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:09.619Z,1516702389.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:10.008Z,1516702390.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:10.023Z,1516702390.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:10.406Z,1516702390.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:10.437Z,1516702390.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:10.814Z,1516702390.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:10.828Z,1516702390.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:11.219Z,1516702391.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:11.233Z,1516702391.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:11.604Z,1516702391.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:11.621Z,1516702391.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:12.002Z,1516702392.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:12.017Z,1516702392.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:12.410Z,1516702392.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:12.425Z,1516702392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:12.799Z,1516702392.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:12.824Z,1516702392.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:13.193Z,1516702393.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:13.222Z,1516702393.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:13.612Z,1516702393.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:13.627Z,1516702393.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:14.014Z,1516702394.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:14.029Z,1516702394.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:14.414Z,1516702394.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:14.429Z,1516702394.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:14.794Z,1516702394.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:14.829Z,1516702394.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:15.194Z,1516702395.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:15.224Z,1516702395.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:15.604Z,1516702395.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:15.619Z,1516702395.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:16.004Z,1516702396.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:16.028Z,1516702396.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:16.418Z,1516702396.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:16.433Z,1516702396.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:16.816Z,1516702396.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:16.831Z,1516702396.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:17.208Z,1516702397.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:17.239Z,1516702397.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:17.592Z,1516702397.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:17.637Z,1516702397.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:17.996Z,1516702397.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:18.019Z,1516702398.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x22928 got:0x3460 2018-01-23T10:13:18.037Z,1516702398.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:18.409Z,1516702398.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:18.425Z,1516702398.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:18.795Z,1516702398.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:18.821Z,1516702398.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:19.192Z,1516702399.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:19.229Z,1516702399.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:19.620Z,1516702399.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:19.628Z,1516702399.628 [PNI_TCM](ERROR): CRC does not match. Expected:0x53695 got:0x17281 2018-01-23T10:13:19.662Z,1516702399.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:20.020Z,1516702400.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:20.035Z,1516702400.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:20.407Z,1516702400.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:20.446Z,1516702400.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:20.791Z,1516702400.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:20.834Z,1516702400.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:21.197Z,1516702401.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:21.235Z,1516702401.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:21.593Z,1516702401.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:21.629Z,1516702401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:21.992Z,1516702401.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:22.017Z,1516702402.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:22.404Z,1516702402.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:22.449Z,1516702402.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:22.824Z,1516702402.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:22.831Z,1516702402.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x11548 got:0x13555 2018-01-23T10:13:22.849Z,1516702402.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:23.205Z,1516702403.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:23.233Z,1516702403.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:23.594Z,1516702403.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:23.610Z,1516702403.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:24.000Z,1516702404.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:24.053Z,1516702404.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:24.398Z,1516702404.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:24.417Z,1516702404.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:24.802Z,1516702404.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:24.820Z,1516702404.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:25.203Z,1516702405.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:25.218Z,1516702405.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:25.611Z,1516702405.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:25.649Z,1516702405.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:26.012Z,1516702406.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:26.046Z,1516702406.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:26.417Z,1516702406.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:26.453Z,1516702406.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:26.801Z,1516702406.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:26.817Z,1516702406.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:27.198Z,1516702407.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:27.241Z,1516702407.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:27.600Z,1516702407.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:27.615Z,1516702407.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:27.000Z,1516702408.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:28.019Z,1516702408.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:28.405Z,1516702408.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:28.421Z,1516702408.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:28.807Z,1516702408.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:28.845Z,1516702408.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:29.203Z,1516702409.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:29.220Z,1516702409.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:29.600Z,1516702409.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:29.619Z,1516702409.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:30.001Z,1516702410.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:30.018Z,1516702410.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:30.405Z,1516702410.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:30.449Z,1516702410.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:30.797Z,1516702410.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:30.831Z,1516702410.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:31.204Z,1516702411.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:31.222Z,1516702411.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:31.612Z,1516702411.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:31.628Z,1516702411.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:32.009Z,1516702412.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:32.051Z,1516702412.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:32.409Z,1516702412.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:32.432Z,1516702412.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:32.799Z,1516702412.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:32.816Z,1516702412.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:33.196Z,1516702413.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:33.225Z,1516702413.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:33.605Z,1516702413.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:33.619Z,1516702413.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:33.990Z,1516702413.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:34.017Z,1516702414.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:34.410Z,1516702414.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:34.429Z,1516702414.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:34.816Z,1516702414.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:34.831Z,1516702414.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:35.212Z,1516702415.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:35.262Z,1516702415.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:35.592Z,1516702415.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:35.630Z,1516702415.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:35.992Z,1516702415.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:36.029Z,1516702416.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:36.397Z,1516702416.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:36.428Z,1516702416.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:36.797Z,1516702416.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:36.843Z,1516702416.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:37.196Z,1516702417.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:37.221Z,1516702417.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:37.611Z,1516702417.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:37.634Z,1516702417.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:38.014Z,1516702418.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:38.043Z,1516702418.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:38.407Z,1516702418.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:38.449Z,1516702418.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:38.794Z,1516702418.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:38.809Z,1516702418.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:39.200Z,1516702419.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:39.240Z,1516702419.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:39.593Z,1516702419.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:39.613Z,1516702419.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:39.991Z,1516702419.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:40.006Z,1516702420.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:40.415Z,1516702420.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:40.446Z,1516702420.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:40.811Z,1516702420.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:40.842Z,1516702420.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:41.208Z,1516702421.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:41.248Z,1516702421.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:41.605Z,1516702421.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:41.646Z,1516702421.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:41.999Z,1516702421.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:42.014Z,1516702422.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:42.400Z,1516702422.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:42.416Z,1516702422.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:42.798Z,1516702422.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:42.836Z,1516702422.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:43.196Z,1516702423.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:43.216Z,1516702423.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:43.607Z,1516702423.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:43.623Z,1516702423.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:44.007Z,1516702424.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:44.023Z,1516702424.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:44.405Z,1516702424.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:44.421Z,1516702424.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:44.799Z,1516702424.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:44.814Z,1516702424.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:45.196Z,1516702425.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:45.225Z,1516702425.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:45.601Z,1516702425.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:45.615Z,1516702425.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:46.001Z,1516702426.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:46.016Z,1516702426.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:46.408Z,1516702426.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:46.433Z,1516702426.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:46.809Z,1516702426.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:46.824Z,1516702426.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:49.905Z,1516702429.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:49.921Z,1516702429.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:49.921Z,1516702429.921 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139 2018-01-23T10:13:49.921Z,1516702429.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:13:49.923Z,1516702429.923 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:49.923Z,1516702429.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 139 2018-01-23T10:13:49.923Z,1516702429.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:13:49.925Z,1516702429.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:49.925Z,1516702429.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139 2018-01-23T10:13:49.925Z,1516702429.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:13:49.937Z,1516702429.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:13:49.937Z,1516702429.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:13:49.937Z,1516702429.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:13:50.025Z,1516702430.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:50.098Z,1516702430.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:13:50.098Z,1516702430.098 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139 2018-01-23T10:13:50.098Z,1516702430.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:13:50.098Z,1516702430.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 139 2018-01-23T10:13:50.103Z,1516702430.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:13:50.103Z,1516702430.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139 2018-01-23T10:13:50.403Z,1516702430.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:50.429Z,1516702430.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:13:50.430Z,1516702430.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:13:50.430Z,1516702430.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:13:50.430Z,1516702430.430 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:13:50.435Z,1516702430.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:13:50.435Z,1516702430.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:13:50.436Z,1516702430.436 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:13:50.436Z,1516702430.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:13:50.436Z,1516702430.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:13:50.815Z,1516702430.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:50.829Z,1516702430.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T10:13:50.831Z,1516702430.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:51.200Z,1516702431.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:51.233Z,1516702431.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T10:13:51.233Z,1516702431.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:51.616Z,1516702431.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:51.639Z,1516702431.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T10:13:51.640Z,1516702431.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:52.024Z,1516702432.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:52.038Z,1516702432.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T10:13:52.039Z,1516702432.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:52.420Z,1516702432.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:52.437Z,1516702432.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T10:13:52.438Z,1516702432.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:52.801Z,1516702432.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:52.827Z,1516702432.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T10:13:52.828Z,1516702432.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:53.201Z,1516702433.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:53.235Z,1516702433.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T10:13:53.236Z,1516702433.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:53.606Z,1516702433.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:53.632Z,1516702433.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T10:13:53.633Z,1516702433.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:54.000Z,1516702434.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:54.032Z,1516702434.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T10:13:54.033Z,1516702434.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:54.419Z,1516702434.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:54.439Z,1516702434.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T10:13:54.439Z,1516702434.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:54.822Z,1516702434.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:54.845Z,1516702434.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T10:13:54.846Z,1516702434.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:55.221Z,1516702435.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:55.235Z,1516702435.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T10:13:55.236Z,1516702435.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:55.600Z,1516702435.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:55.642Z,1516702435.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T10:13:55.643Z,1516702435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:56.001Z,1516702436.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:56.020Z,1516702436.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T10:13:56.021Z,1516702436.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:56.412Z,1516702436.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:56.449Z,1516702436.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T10:13:56.450Z,1516702436.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:56.805Z,1516702436.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:56.819Z,1516702436.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T10:13:56.820Z,1516702436.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:57.206Z,1516702437.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:57.224Z,1516702437.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T10:13:57.225Z,1516702437.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:57.615Z,1516702437.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:57.630Z,1516702437.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T10:13:57.631Z,1516702437.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:58.015Z,1516702438.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:58.029Z,1516702438.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T10:13:58.030Z,1516702438.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:58.427Z,1516702438.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:58.442Z,1516702438.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T10:13:58.463Z,1516702438.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:58.813Z,1516702438.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:58.828Z,1516702438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T10:13:58.829Z,1516702438.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:59.211Z,1516702439.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:59.225Z,1516702439.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T10:13:59.226Z,1516702439.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:13:59.609Z,1516702439.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:13:59.628Z,1516702439.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T10:13:59.629Z,1516702439.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:00.005Z,1516702440.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:00.028Z,1516702440.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T10:14:00.029Z,1516702440.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:00.421Z,1516702440.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:00.435Z,1516702440.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T10:14:00.436Z,1516702440.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:00.823Z,1516702440.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:00.838Z,1516702440.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T10:14:00.839Z,1516702440.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:01.220Z,1516702441.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:01.235Z,1516702441.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T10:14:01.236Z,1516702441.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:01.608Z,1516702441.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:01.637Z,1516702441.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T10:14:01.638Z,1516702441.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:01.998Z,1516702441.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:02.026Z,1516702442.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T10:14:02.027Z,1516702442.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:02.403Z,1516702442.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:02.436Z,1516702442.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T10:14:02.437Z,1516702442.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:02.810Z,1516702442.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:02.825Z,1516702442.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T10:14:02.826Z,1516702442.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:03.198Z,1516702443.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:03.229Z,1516702443.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T10:14:03.230Z,1516702443.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:03.619Z,1516702443.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:03.634Z,1516702443.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T10:14:03.636Z,1516702443.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:04.024Z,1516702444.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:04.039Z,1516702444.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T10:14:04.040Z,1516702444.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:04.419Z,1516702444.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:04.434Z,1516702444.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T10:14:04.436Z,1516702444.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:04.800Z,1516702444.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:04.832Z,1516702444.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T10:14:04.833Z,1516702444.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:05.200Z,1516702445.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:05.235Z,1516702445.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T10:14:05.236Z,1516702445.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:05.601Z,1516702445.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:05.627Z,1516702445.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T10:14:05.628Z,1516702445.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:06.000Z,1516702446.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:06.033Z,1516702446.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T10:14:06.033Z,1516702446.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:06.423Z,1516702446.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:06.438Z,1516702446.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T10:14:06.439Z,1516702446.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:06.822Z,1516702446.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:06.837Z,1516702446.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T10:14:06.838Z,1516702446.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:07.219Z,1516702447.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:07.234Z,1516702447.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T10:14:07.235Z,1516702447.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:07.600Z,1516702447.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:07.635Z,1516702447.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T10:14:07.636Z,1516702447.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:07.998Z,1516702447.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:08.025Z,1516702448.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T10:14:08.026Z,1516702448.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:08.401Z,1516702448.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:08.432Z,1516702448.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T10:14:08.433Z,1516702448.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:08.801Z,1516702448.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:08.840Z,1516702448.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T10:14:08.841Z,1516702448.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:09.198Z,1516702449.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:09.213Z,1516702449.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T10:14:09.214Z,1516702449.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:09.611Z,1516702449.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:09.642Z,1516702449.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T10:14:09.647Z,1516702449.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:10.019Z,1516702450.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:10.054Z,1516702450.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:10.419Z,1516702450.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:10.450Z,1516702450.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:10.805Z,1516702450.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:10.832Z,1516702450.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:11.209Z,1516702451.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:11.224Z,1516702451.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:11.610Z,1516702451.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:11.625Z,1516702451.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:12.006Z,1516702452.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:12.029Z,1516702452.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:12.411Z,1516702452.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:12.426Z,1516702452.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:12.811Z,1516702452.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:12.826Z,1516702452.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:13.211Z,1516702453.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:13.226Z,1516702453.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:13.608Z,1516702453.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:13.628Z,1516702453.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:14.004Z,1516702454.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:14.033Z,1516702454.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:14.408Z,1516702454.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:14.429Z,1516702454.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:14.810Z,1516702454.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:14.824Z,1516702454.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:15.204Z,1516702455.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:15.224Z,1516702455.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:15.613Z,1516702455.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:15.633Z,1516702455.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:16.019Z,1516702456.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:16.033Z,1516702456.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:16.416Z,1516702456.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:16.431Z,1516702456.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:16.808Z,1516702456.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:16.823Z,1516702456.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:17.214Z,1516702457.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:17.228Z,1516702457.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:17.608Z,1516702457.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:17.627Z,1516702457.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:18.008Z,1516702458.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:18.029Z,1516702458.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:18.415Z,1516702458.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:18.430Z,1516702458.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:18.814Z,1516702458.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:18.829Z,1516702458.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:19.228Z,1516702459.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:19.242Z,1516702459.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:19.614Z,1516702459.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:19.629Z,1516702459.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:20.005Z,1516702460.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:20.032Z,1516702460.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:20.409Z,1516702460.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:20.429Z,1516702460.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:20.810Z,1516702460.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:20.825Z,1516702460.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:21.204Z,1516702461.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:21.227Z,1516702461.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:21.619Z,1516702461.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:21.634Z,1516702461.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:21.648Z,1516702461.648 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:14:22.023Z,1516702462.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:22.044Z,1516702462.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:22.423Z,1516702462.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:22.438Z,1516702462.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:22.804Z,1516702462.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:22.829Z,1516702462.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:23.209Z,1516702463.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:23.229Z,1516702463.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:23.613Z,1516702463.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:23.629Z,1516702463.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:24.003Z,1516702464.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:24.036Z,1516702464.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:24.420Z,1516702464.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:24.435Z,1516702464.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:24.822Z,1516702464.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:24.837Z,1516702464.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:25.218Z,1516702465.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:25.233Z,1516702465.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:25.617Z,1516702465.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:25.632Z,1516702465.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:25.998Z,1516702465.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:26.025Z,1516702466.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:26.403Z,1516702466.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:26.427Z,1516702466.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:26.809Z,1516702466.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:26.824Z,1516702466.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:27.204Z,1516702467.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:27.227Z,1516702467.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:27.620Z,1516702467.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:27.650Z,1516702467.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:28.024Z,1516702468.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:28.038Z,1516702468.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:28.419Z,1516702468.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:28.434Z,1516702468.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:28.800Z,1516702468.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:28.836Z,1516702468.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:29.200Z,1516702469.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:29.234Z,1516702469.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:29.601Z,1516702469.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:29.633Z,1516702469.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:29.999Z,1516702469.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:30.037Z,1516702470.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:30.411Z,1516702470.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:30.446Z,1516702470.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:30.811Z,1516702470.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:30.837Z,1516702470.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:31.215Z,1516702471.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:31.242Z,1516702471.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:31.602Z,1516702471.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:31.642Z,1516702471.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:31.998Z,1516702471.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:32.013Z,1516702472.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:32.412Z,1516702472.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:32.449Z,1516702472.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:32.816Z,1516702472.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:32.851Z,1516702472.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:33.212Z,1516702473.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:33.244Z,1516702473.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:33.610Z,1516702473.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:33.625Z,1516702473.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:34.005Z,1516702474.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:34.021Z,1516702474.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:34.420Z,1516702474.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:34.452Z,1516702474.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:34.820Z,1516702474.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:34.851Z,1516702474.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:35.222Z,1516702475.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:35.237Z,1516702475.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:35.608Z,1516702475.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:35.629Z,1516702475.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:36.014Z,1516702476.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:36.029Z,1516702476.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:36.415Z,1516702476.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:36.430Z,1516702476.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:36.816Z,1516702476.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:36.831Z,1516702476.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:37.215Z,1516702477.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:37.237Z,1516702477.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:37.615Z,1516702477.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:37.630Z,1516702477.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:38.006Z,1516702478.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:38.029Z,1516702478.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:38.423Z,1516702478.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:38.438Z,1516702478.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:38.823Z,1516702478.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:38.837Z,1516702478.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:39.219Z,1516702479.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:39.234Z,1516702479.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:39.605Z,1516702479.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:39.628Z,1516702479.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:40.008Z,1516702480.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:40.029Z,1516702480.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:40.416Z,1516702480.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:40.444Z,1516702480.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:40.823Z,1516702480.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:40.839Z,1516702480.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:41.219Z,1516702481.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:41.233Z,1516702481.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:41.601Z,1516702481.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:41.628Z,1516702481.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:42.000Z,1516702482.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:42.033Z,1516702482.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:42.418Z,1516702482.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:42.442Z,1516702482.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:42.818Z,1516702482.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:42.833Z,1516702482.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:43.219Z,1516702483.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:43.234Z,1516702483.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:43.601Z,1516702483.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:43.636Z,1516702483.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:43.998Z,1516702483.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:44.026Z,1516702484.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:44.419Z,1516702484.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:44.434Z,1516702484.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:44.824Z,1516702484.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:44.838Z,1516702484.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:45.219Z,1516702485.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:45.234Z,1516702485.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:45.601Z,1516702485.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:45.636Z,1516702485.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:45.643Z,1516702485.643 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T10:09:45.3Z 2018-01-23T10:14:45.643Z,1516702485.643 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:14:45.643Z,1516702485.643 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:14:46.000Z,1516702486.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:46.033Z,1516702486.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:46.546Z,1516702486.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:46.578Z,1516702486.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:46.824Z,1516702486.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:46.857Z,1516702486.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:49.918Z,1516702489.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:49.940Z,1516702489.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:50.019Z,1516702490.019 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0164.lzma 2018-01-23T10:14:50.039Z,1516702490.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:50.084Z,1516702490.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:50.393Z,1516702490.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:50.429Z,1516702490.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:50.772Z,1516702490.772 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0164.lzma.bak 2018-01-23T10:14:50.772Z,1516702490.772 [DataOverHttps](INFO): SBD MOMSN=7755409 2018-01-23T10:14:50.801Z,1516702490.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:50.847Z,1516702490.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:51.433Z,1516702491.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:51.482Z,1516702491.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:51.604Z,1516702491.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:51.637Z,1516702491.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:54.733Z,1516702494.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:54.748Z,1516702494.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:54.860Z,1516702494.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:54.901Z,1516702494.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:55.209Z,1516702495.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:55.234Z,1516702495.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:55.613Z,1516702495.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:55.640Z,1516702495.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:56.009Z,1516702496.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:56.035Z,1516702496.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:56.422Z,1516702496.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:56.455Z,1516702496.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:59.525Z,1516702499.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:59.540Z,1516702499.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:59.640Z,1516702499.640 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0165.lzma 2018-01-23T10:14:59.688Z,1516702499.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:14:59.727Z,1516702499.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:14:59.993Z,1516702499.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:00.013Z,1516702500.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:00.361Z,1516702500.361 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0165.lzma.bak 2018-01-23T10:15:00.362Z,1516702500.362 [DataOverHttps](INFO): SBD MOMSN=7755411 2018-01-23T10:15:00.403Z,1516702500.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:00.418Z,1516702500.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:01.021Z,1516702501.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:01.052Z,1516702501.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:01.055Z,1516702501.055 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:15:01.055Z,1516702501.055 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:15:01.055Z,1516702501.055 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:15:01.184Z,1516702501.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:01.213Z,1516702501.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:04.300Z,1516702504.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:04.316Z,1516702504.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:04.427Z,1516702504.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:04.473Z,1516702504.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:04.776Z,1516702504.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:04.805Z,1516702504.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:05.169Z,1516702505.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:05.200Z,1516702505.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:05.562Z,1516702505.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:05.577Z,1516702505.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:05.964Z,1516702505.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:05.992Z,1516702505.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:06.368Z,1516702506.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:06.405Z,1516702506.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:06.780Z,1516702506.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:06.810Z,1516702506.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:07.175Z,1516702507.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:07.190Z,1516702507.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:07.580Z,1516702507.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:07.594Z,1516702507.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:07.966Z,1516702507.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:07.981Z,1516702507.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:08.367Z,1516702508.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:08.382Z,1516702508.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:08.772Z,1516702508.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:08.787Z,1516702508.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:09.165Z,1516702509.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:09.181Z,1516702509.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:09.571Z,1516702509.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:09.593Z,1516702509.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:09.975Z,1516702509.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:09.997Z,1516702509.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:10.374Z,1516702510.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:10.390Z,1516702510.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:10.764Z,1516702510.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:10.791Z,1516702510.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:11.157Z,1516702511.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:11.193Z,1516702511.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:11.561Z,1516702511.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:11.588Z,1516702511.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:11.962Z,1516702511.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:12.003Z,1516702512.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:12.356Z,1516702512.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:12.393Z,1516702512.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:12.780Z,1516702512.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:12.799Z,1516702512.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:13.176Z,1516702513.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:13.207Z,1516702513.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:13.566Z,1516702513.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:13.598Z,1516702513.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:13.956Z,1516702513.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:14.000Z,1516702514.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:14.360Z,1516702514.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:14.399Z,1516702514.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:14.757Z,1516702514.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:14.797Z,1516702514.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:15.156Z,1516702515.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:15.177Z,1516702515.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:15.575Z,1516702515.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:15.602Z,1516702515.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:15.975Z,1516702515.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:16.006Z,1516702516.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:16.375Z,1516702516.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:16.402Z,1516702516.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:16.765Z,1516702516.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:16.781Z,1516702516.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:17.164Z,1516702517.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:17.179Z,1516702517.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:17.562Z,1516702517.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:17.581Z,1516702517.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:17.962Z,1516702517.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:17.981Z,1516702517.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:18.361Z,1516702518.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:18.387Z,1516702518.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:18.771Z,1516702518.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:18.787Z,1516702518.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:19.179Z,1516702519.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:19.209Z,1516702519.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:19.567Z,1516702519.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:19.589Z,1516702519.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:19.964Z,1516702519.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:19.979Z,1516702519.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:20.365Z,1516702520.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:20.385Z,1516702520.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:20.765Z,1516702520.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:20.779Z,1516702520.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:21.163Z,1516702521.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:21.184Z,1516702521.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:21.567Z,1516702521.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:21.582Z,1516702521.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:21.971Z,1516702521.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:21.986Z,1516702521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:22.380Z,1516702522.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:22.413Z,1516702522.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:22.763Z,1516702522.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:22.778Z,1516702522.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:23.164Z,1516702523.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:23.185Z,1516702523.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:23.564Z,1516702523.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:23.579Z,1516702523.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:23.962Z,1516702523.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:23.985Z,1516702523.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:24.368Z,1516702524.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:24.382Z,1516702524.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:24.770Z,1516702524.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:24.789Z,1516702524.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:25.171Z,1516702525.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:25.186Z,1516702525.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:25.570Z,1516702525.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:25.589Z,1516702525.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:25.968Z,1516702525.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:25.984Z,1516702525.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:26.364Z,1516702526.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:26.379Z,1516702526.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:26.766Z,1516702526.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:26.780Z,1516702526.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:27.164Z,1516702527.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:27.179Z,1516702527.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:27.569Z,1516702527.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:27.589Z,1516702527.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:27.970Z,1516702527.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:27.985Z,1516702527.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:28.370Z,1516702528.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:28.389Z,1516702528.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:28.764Z,1516702528.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:28.779Z,1516702528.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:29.165Z,1516702529.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:29.180Z,1516702529.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:29.568Z,1516702529.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:29.584Z,1516702529.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:29.970Z,1516702529.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:29.986Z,1516702529.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:30.365Z,1516702530.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:30.385Z,1516702530.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:30.772Z,1516702530.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:30.787Z,1516702530.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:31.171Z,1516702531.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:31.186Z,1516702531.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:31.571Z,1516702531.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:31.586Z,1516702531.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:31.969Z,1516702531.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:31.984Z,1516702531.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:32.369Z,1516702532.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:32.384Z,1516702532.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:32.766Z,1516702532.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:32.781Z,1516702532.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:33.165Z,1516702533.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:33.180Z,1516702533.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:33.570Z,1516702533.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:33.589Z,1516702533.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:33.996Z,1516702533.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:34.039Z,1516702534.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:34.372Z,1516702534.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:34.387Z,1516702534.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:34.764Z,1516702534.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:34.783Z,1516702534.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:35.166Z,1516702535.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:35.180Z,1516702535.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:35.565Z,1516702535.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:35.580Z,1516702535.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:35.964Z,1516702535.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:35.989Z,1516702535.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:36.366Z,1516702536.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:36.385Z,1516702536.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:36.772Z,1516702536.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:36.787Z,1516702536.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:37.178Z,1516702537.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:37.201Z,1516702537.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:37.576Z,1516702537.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:37.591Z,1516702537.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:37.959Z,1516702537.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:37.984Z,1516702537.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:38.363Z,1516702538.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:38.391Z,1516702538.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:38.766Z,1516702538.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:38.781Z,1516702538.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:39.160Z,1516702539.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:39.182Z,1516702539.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:39.574Z,1516702539.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:39.590Z,1516702539.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:39.983Z,1516702539.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:39.998Z,1516702539.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:40.378Z,1516702540.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:40.401Z,1516702540.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:40.767Z,1516702540.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:40.787Z,1516702540.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:41.156Z,1516702541.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:41.189Z,1516702541.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:41.568Z,1516702541.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:41.587Z,1516702541.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:41.957Z,1516702541.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:41.989Z,1516702541.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:42.356Z,1516702542.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:42.389Z,1516702542.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:42.779Z,1516702542.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:42.801Z,1516702542.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:43.179Z,1516702543.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:43.201Z,1516702543.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:43.580Z,1516702543.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:43.595Z,1516702543.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:43.972Z,1516702543.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:43.989Z,1516702543.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:44.372Z,1516702544.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:44.389Z,1516702544.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:44.758Z,1516702544.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:44.785Z,1516702544.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:45.169Z,1516702545.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:45.185Z,1516702545.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:45.572Z,1516702545.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:45.599Z,1516702545.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:45.981Z,1516702545.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:45.996Z,1516702545.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:46.376Z,1516702546.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:46.391Z,1516702546.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:46.755Z,1516702546.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:46.789Z,1516702546.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:47.156Z,1516702547.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:47.190Z,1516702547.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:47.560Z,1516702547.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:47.589Z,1516702547.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:47.957Z,1516702547.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:47.981Z,1516702547.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:48.360Z,1516702548.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:48.389Z,1516702548.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:48.779Z,1516702548.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:48.801Z,1516702548.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:49.177Z,1516702549.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:49.198Z,1516702549.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:49.578Z,1516702549.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:49.601Z,1516702549.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:49.954Z,1516702549.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:49.978Z,1516702549.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:50.364Z,1516702550.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:50.397Z,1516702550.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:50.758Z,1516702550.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:50.794Z,1516702550.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:51.155Z,1516702551.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:51.170Z,1516702551.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:51.573Z,1516702551.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:51.655Z,1516702551.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:51.974Z,1516702551.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:52.035Z,1516702552.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:52.374Z,1516702552.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:52.410Z,1516702552.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:52.772Z,1516702552.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:52.815Z,1516702552.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:53.171Z,1516702553.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:53.212Z,1516702553.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:53.572Z,1516702553.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:53.601Z,1516702553.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:53.976Z,1516702553.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:54.005Z,1516702554.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:54.390Z,1516702554.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:54.440Z,1516702554.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:54.776Z,1516702554.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:54.791Z,1516702554.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:55.198Z,1516702555.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:55.228Z,1516702555.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:55.574Z,1516702555.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:55.606Z,1516702555.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:55.956Z,1516702555.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:56.003Z,1516702556.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:56.357Z,1516702556.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:56.382Z,1516702556.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:56.761Z,1516702556.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:56.796Z,1516702556.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:57.154Z,1516702557.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:57.210Z,1516702557.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:57.597Z,1516702557.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:57.632Z,1516702557.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:57.980Z,1516702557.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:58.030Z,1516702558.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:58.393Z,1516702558.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:58.432Z,1516702558.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:58.774Z,1516702558.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:58.793Z,1516702558.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:59.163Z,1516702559.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:59.231Z,1516702559.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:59.563Z,1516702559.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:15:59.603Z,1516702559.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:15:59.988Z,1516702559.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:00.042Z,1516702560.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:00.362Z,1516702560.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:00.443Z,1516702560.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:00.773Z,1516702560.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:00.813Z,1516702560.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:01.177Z,1516702561.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:01.211Z,1516702561.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:01.586Z,1516702561.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:01.626Z,1516702561.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:07.949Z,1516702567.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:07.977Z,1516702567.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:08.095Z,1516702568.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:08.136Z,1516702568.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:08.489Z,1516702568.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:08.513Z,1516702568.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:08.897Z,1516702568.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:08.944Z,1516702568.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:09.302Z,1516702569.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:09.350Z,1516702569.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:09.669Z,1516702569.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:09.724Z,1516702569.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:10.083Z,1516702570.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:10.123Z,1516702570.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:10.474Z,1516702570.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:10.505Z,1516702570.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:10.885Z,1516702570.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:10.946Z,1516702570.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:11.283Z,1516702571.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:11.309Z,1516702571.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:11.679Z,1516702571.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:11.715Z,1516702571.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:12.068Z,1516702572.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:12.112Z,1516702572.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:12.472Z,1516702572.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:12.508Z,1516702572.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:12.869Z,1516702572.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:12.909Z,1516702572.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:13.272Z,1516702573.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:13.287Z,1516702573.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:13.683Z,1516702573.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:13.710Z,1516702573.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:14.100Z,1516702574.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:14.115Z,1516702574.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:14.479Z,1516702574.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:14.516Z,1516702574.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:14.869Z,1516702574.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:14.892Z,1516702574.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:15.276Z,1516702575.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:15.291Z,1516702575.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:15.676Z,1516702575.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:15.691Z,1516702575.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:16.077Z,1516702576.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:16.097Z,1516702576.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:16.474Z,1516702576.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:16.497Z,1516702576.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:16.883Z,1516702576.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:16.898Z,1516702576.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:17.315Z,1516702577.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:17.342Z,1516702577.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:17.682Z,1516702577.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:17.701Z,1516702577.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:18.082Z,1516702578.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:18.097Z,1516702578.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:18.468Z,1516702578.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:18.501Z,1516702578.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:18.869Z,1516702578.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:18.901Z,1516702578.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:19.268Z,1516702579.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:19.303Z,1516702579.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:19.691Z,1516702579.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:19.706Z,1516702579.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:20.091Z,1516702580.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:20.115Z,1516702580.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:20.485Z,1516702580.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:20.503Z,1516702580.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:20.868Z,1516702580.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:20.901Z,1516702580.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:21.268Z,1516702581.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:21.301Z,1516702581.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:21.667Z,1516702581.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:21.705Z,1516702581.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:22.067Z,1516702582.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:22.090Z,1516702582.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:22.468Z,1516702582.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:22.505Z,1516702582.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:22.879Z,1516702582.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:22.914Z,1516702582.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:23.279Z,1516702583.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:23.313Z,1516702583.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:23.679Z,1516702583.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:23.706Z,1516702583.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:24.076Z,1516702584.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:24.105Z,1516702584.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:24.472Z,1516702584.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:24.505Z,1516702584.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:24.870Z,1516702584.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:24.905Z,1516702584.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:25.269Z,1516702585.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:25.309Z,1516702585.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:25.692Z,1516702585.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:25.707Z,1516702585.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:26.091Z,1516702586.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:26.110Z,1516702586.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:26.520Z,1516702586.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:26.568Z,1516702586.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:26.866Z,1516702586.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:26.882Z,1516702586.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:27.268Z,1516702587.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:27.309Z,1516702587.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:27.669Z,1516702587.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:27.685Z,1516702587.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:28.074Z,1516702588.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:28.090Z,1516702588.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:28.480Z,1516702588.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:28.517Z,1516702588.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:28.883Z,1516702588.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:28.899Z,1516702588.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:29.279Z,1516702589.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:29.294Z,1516702589.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:29.679Z,1516702589.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:29.694Z,1516702589.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:30.076Z,1516702590.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:30.091Z,1516702590.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:30.476Z,1516702590.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:30.491Z,1516702590.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:30.876Z,1516702590.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:30.891Z,1516702590.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:31.274Z,1516702591.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:31.293Z,1516702591.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:31.687Z,1516702591.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:31.702Z,1516702591.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:32.090Z,1516702592.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:32.105Z,1516702592.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:32.492Z,1516702592.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:32.597Z,1516702592.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:32.866Z,1516702592.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:32.897Z,1516702592.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:33.271Z,1516702593.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:33.303Z,1516702593.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:33.678Z,1516702593.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:33.705Z,1516702593.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:34.082Z,1516702594.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:34.105Z,1516702594.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:34.485Z,1516702594.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:34.501Z,1516702594.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:34.887Z,1516702594.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:34.910Z,1516702594.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:35.294Z,1516702595.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:35.317Z,1516702595.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:35.688Z,1516702595.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:35.704Z,1516702595.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:36.069Z,1516702596.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:36.105Z,1516702596.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:36.473Z,1516702596.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:36.500Z,1516702596.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:36.869Z,1516702596.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:36.905Z,1516702596.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:37.269Z,1516702597.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:37.305Z,1516702597.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:37.679Z,1516702597.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:37.718Z,1516702597.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:38.093Z,1516702598.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:38.108Z,1516702598.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:38.479Z,1516702598.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:38.518Z,1516702598.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:38.868Z,1516702598.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:38.906Z,1516702598.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:39.268Z,1516702599.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:39.305Z,1516702599.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:39.669Z,1516702599.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:39.706Z,1516702599.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:40.073Z,1516702600.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:40.109Z,1516702600.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:40.476Z,1516702600.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:40.514Z,1516702600.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:40.883Z,1516702600.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:40.910Z,1516702600.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:41.287Z,1516702601.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:41.310Z,1516702601.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:41.691Z,1516702601.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:41.717Z,1516702601.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:42.074Z,1516702602.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:42.089Z,1516702602.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:42.481Z,1516702602.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:42.496Z,1516702602.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:42.877Z,1516702602.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:42.892Z,1516702602.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:43.273Z,1516702603.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:43.297Z,1516702603.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:43.680Z,1516702603.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:43.696Z,1516702603.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:44.083Z,1516702604.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:44.125Z,1516702604.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:44.479Z,1516702604.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:44.494Z,1516702604.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:44.876Z,1516702604.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:44.891Z,1516702604.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:45.275Z,1516702605.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:45.290Z,1516702605.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:45.676Z,1516702605.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:45.690Z,1516702605.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:46.076Z,1516702606.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:46.091Z,1516702606.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:46.474Z,1516702606.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:46.493Z,1516702606.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:46.882Z,1516702606.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:46.897Z,1516702606.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:47.283Z,1516702607.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:47.298Z,1516702607.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:47.682Z,1516702607.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:47.701Z,1516702607.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:48.077Z,1516702608.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:48.092Z,1516702608.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:48.480Z,1516702608.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:48.496Z,1516702608.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:48.873Z,1516702608.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:48.894Z,1516702608.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:49.277Z,1516702609.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:49.292Z,1516702609.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:49.682Z,1516702609.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:49.713Z,1516702609.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:50.090Z,1516702610.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:50.109Z,1516702610.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:50.488Z,1516702610.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:50.502Z,1516702610.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:50.502Z,1516702610.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140 2018-01-23T10:16:50.503Z,1516702610.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:16:50.505Z,1516702610.505 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:50.505Z,1516702610.505 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 140 2018-01-23T10:16:50.505Z,1516702610.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:16:50.506Z,1516702610.506 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:50.507Z,1516702610.507 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140 2018-01-23T10:16:50.507Z,1516702610.507 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:16:50.518Z,1516702610.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:16:50.518Z,1516702610.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:16:50.540Z,1516702610.540 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:16:50.869Z,1516702610.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:50.911Z,1516702610.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:16:50.911Z,1516702610.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140 2018-01-23T10:16:50.912Z,1516702610.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:16:50.912Z,1516702610.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 140 2018-01-23T10:16:50.912Z,1516702610.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:16:50.912Z,1516702610.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140 2018-01-23T10:16:51.268Z,1516702611.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:51.300Z,1516702611.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:16:51.300Z,1516702611.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:16:51.300Z,1516702611.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:16:51.301Z,1516702611.301 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:16:51.301Z,1516702611.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:16:51.301Z,1516702611.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:16:51.302Z,1516702611.302 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:16:51.302Z,1516702611.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:16:51.303Z,1516702611.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:16:51.667Z,1516702611.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:51.702Z,1516702611.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:16:51.703Z,1516702611.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:52.069Z,1516702612.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:52.095Z,1516702612.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:16:52.096Z,1516702612.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:52.468Z,1516702612.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:52.500Z,1516702612.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:16:52.501Z,1516702612.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:52.886Z,1516702612.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:52.909Z,1516702612.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:16:52.910Z,1516702612.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:53.295Z,1516702613.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:53.310Z,1516702613.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:16:53.311Z,1516702613.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:53.684Z,1516702613.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:53.705Z,1516702613.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:16:53.706Z,1516702613.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:54.068Z,1516702614.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:54.103Z,1516702614.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:16:54.104Z,1516702614.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:54.469Z,1516702614.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:54.500Z,1516702614.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:16:54.501Z,1516702614.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:54.873Z,1516702614.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:54.899Z,1516702614.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:16:54.900Z,1516702614.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:55.267Z,1516702615.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:55.296Z,1516702615.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:16:55.297Z,1516702615.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:55.691Z,1516702615.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:55.712Z,1516702615.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:16:55.713Z,1516702615.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:56.091Z,1516702616.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:56.106Z,1516702616.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:16:56.107Z,1516702616.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:56.482Z,1516702616.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:56.512Z,1516702616.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:16:56.513Z,1516702616.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:56.872Z,1516702616.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:56.898Z,1516702616.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:16:56.899Z,1516702616.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:57.268Z,1516702617.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:57.294Z,1516702617.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:16:57.295Z,1516702617.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:57.668Z,1516702617.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:57.703Z,1516702617.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:16:57.704Z,1516702617.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:58.073Z,1516702618.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:58.099Z,1516702618.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:16:58.100Z,1516702618.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:58.468Z,1516702618.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:58.500Z,1516702618.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:16:58.501Z,1516702618.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:58.886Z,1516702618.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:58.905Z,1516702618.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:16:58.906Z,1516702618.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:59.291Z,1516702619.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:59.306Z,1516702619.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:16:59.307Z,1516702619.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:16:59.684Z,1516702619.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:16:59.705Z,1516702619.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:16:59.705Z,1516702619.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:00.068Z,1516702620.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:00.103Z,1516702620.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:17:00.104Z,1516702620.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:00.468Z,1516702620.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:00.494Z,1516702620.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:17:00.495Z,1516702620.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:00.869Z,1516702620.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:00.900Z,1516702620.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:17:00.901Z,1516702620.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:01.269Z,1516702621.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:01.303Z,1516702621.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:17:01.304Z,1516702621.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:01.693Z,1516702621.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:01.707Z,1516702621.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:17:01.708Z,1516702621.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:04.833Z,1516702624.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:04.847Z,1516702624.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T10:17:04.848Z,1516702624.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:04.960Z,1516702624.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:04.996Z,1516702624.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T10:17:04.997Z,1516702624.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:05.304Z,1516702625.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:05.324Z,1516702625.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:17:05.325Z,1516702625.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:05.702Z,1516702625.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:05.717Z,1516702625.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:17:05.718Z,1516702625.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:06.097Z,1516702626.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:06.117Z,1516702626.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:17:06.118Z,1516702626.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:06.499Z,1516702626.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:06.520Z,1516702626.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:17:06.521Z,1516702626.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:06.904Z,1516702626.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:06.924Z,1516702626.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:17:06.925Z,1516702626.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:07.304Z,1516702627.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:07.319Z,1516702627.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:17:07.320Z,1516702627.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:07.704Z,1516702627.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:07.719Z,1516702627.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:17:07.720Z,1516702627.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:08.100Z,1516702628.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:08.115Z,1516702628.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:17:08.116Z,1516702628.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:08.500Z,1516702628.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:08.515Z,1516702628.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:17:08.516Z,1516702628.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:08.896Z,1516702628.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:08.919Z,1516702628.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:17:08.920Z,1516702628.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:09.301Z,1516702629.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:09.316Z,1516702629.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:17:09.317Z,1516702629.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:09.706Z,1516702629.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:09.725Z,1516702629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:17:09.726Z,1516702629.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:10.107Z,1516702630.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:10.129Z,1516702630.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:17:10.130Z,1516702630.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:10.511Z,1516702630.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:10.525Z,1516702630.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:10.896Z,1516702630.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:10.917Z,1516702630.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:11.296Z,1516702631.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:11.327Z,1516702631.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:11.692Z,1516702631.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:11.719Z,1516702631.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:12.091Z,1516702632.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:12.125Z,1516702632.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:12.491Z,1516702632.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:12.517Z,1516702632.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:12.910Z,1516702632.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:12.933Z,1516702632.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:13.310Z,1516702633.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:13.332Z,1516702633.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:13.711Z,1516702633.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:13.726Z,1516702633.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:14.092Z,1516702634.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:14.127Z,1516702634.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:14.496Z,1516702634.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:14.529Z,1516702634.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:14.893Z,1516702634.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:14.921Z,1516702634.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:15.296Z,1516702635.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:15.323Z,1516702635.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:15.712Z,1516702635.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:15.731Z,1516702635.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:16.123Z,1516702636.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:16.145Z,1516702636.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:16.517Z,1516702636.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:16.531Z,1516702636.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:16.891Z,1516702636.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:16.918Z,1516702636.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:17.293Z,1516702637.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:17.324Z,1516702637.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:17.693Z,1516702637.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:17.708Z,1516702637.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:18.094Z,1516702638.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:18.109Z,1516702638.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:18.505Z,1516702638.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:18.536Z,1516702638.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:18.915Z,1516702638.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:18.941Z,1516702638.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:19.312Z,1516702639.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:19.343Z,1516702639.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:19.708Z,1516702639.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:19.723Z,1516702639.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:20.101Z,1516702640.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:20.117Z,1516702640.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:20.500Z,1516702640.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:20.520Z,1516702640.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:20.898Z,1516702640.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:20.918Z,1516702640.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:21.301Z,1516702641.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:21.316Z,1516702641.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:21.707Z,1516702641.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:21.722Z,1516702641.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:22.119Z,1516702642.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:22.151Z,1516702642.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:22.519Z,1516702642.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:22.554Z,1516702642.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:22.900Z,1516702642.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:22.915Z,1516702642.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:23.300Z,1516702643.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:23.319Z,1516702643.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:23.702Z,1516702643.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:23.717Z,1516702643.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:24.098Z,1516702644.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:24.121Z,1516702644.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:24.506Z,1516702644.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:24.521Z,1516702644.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:24.907Z,1516702644.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:24.922Z,1516702644.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:25.306Z,1516702645.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:25.321Z,1516702645.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:25.708Z,1516702645.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:25.723Z,1516702645.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:26.101Z,1516702646.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:26.116Z,1516702646.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:26.500Z,1516702646.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:26.516Z,1516702646.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:26.900Z,1516702646.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:26.919Z,1516702646.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:27.301Z,1516702647.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:27.316Z,1516702647.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:27.706Z,1516702647.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:27.721Z,1516702647.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:28.107Z,1516702648.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:28.122Z,1516702648.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:28.506Z,1516702648.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:28.521Z,1516702648.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:28.896Z,1516702648.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:28.916Z,1516702648.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:29.300Z,1516702649.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:29.315Z,1516702649.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:29.701Z,1516702649.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:29.716Z,1516702649.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:30.100Z,1516702650.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:30.119Z,1516702650.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:30.500Z,1516702650.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:30.515Z,1516702650.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:30.906Z,1516702650.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:30.928Z,1516702650.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:31.306Z,1516702651.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:31.325Z,1516702651.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:31.706Z,1516702651.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:31.725Z,1516702651.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:32.104Z,1516702652.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:32.119Z,1516702652.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:32.500Z,1516702652.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:32.516Z,1516702652.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:32.906Z,1516702652.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:32.921Z,1516702652.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:33.301Z,1516702653.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:33.316Z,1516702653.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:33.706Z,1516702653.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:33.729Z,1516702653.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:34.112Z,1516702654.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:34.126Z,1516702654.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:34.510Z,1516702654.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:34.525Z,1516702654.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:34.898Z,1516702654.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:34.913Z,1516702654.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:35.300Z,1516702655.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:35.315Z,1516702655.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:35.701Z,1516702655.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:35.716Z,1516702655.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:36.100Z,1516702656.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:36.119Z,1516702656.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:36.496Z,1516702656.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:36.518Z,1516702656.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:36.910Z,1516702656.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:36.933Z,1516702656.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:37.310Z,1516702657.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:37.326Z,1516702657.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:37.711Z,1516702657.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:37.725Z,1516702657.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:38.101Z,1516702658.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:38.115Z,1516702658.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:38.500Z,1516702658.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:38.515Z,1516702658.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:38.896Z,1516702658.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:38.927Z,1516702658.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:39.305Z,1516702659.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:39.319Z,1516702659.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:39.711Z,1516702659.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:39.726Z,1516702659.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:40.114Z,1516702660.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:40.133Z,1516702660.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:40.512Z,1516702660.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:40.526Z,1516702660.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:40.900Z,1516702660.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:40.920Z,1516702660.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:41.295Z,1516702661.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:41.328Z,1516702661.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:41.712Z,1516702661.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:41.727Z,1516702661.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:42.110Z,1516702662.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:42.126Z,1516702662.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:42.514Z,1516702662.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:42.529Z,1516702662.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:42.906Z,1516702662.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:42.921Z,1516702662.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:43.295Z,1516702663.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:43.318Z,1516702663.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:43.697Z,1516702663.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:43.729Z,1516702663.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:44.094Z,1516702664.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:44.129Z,1516702664.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:44.492Z,1516702664.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:44.529Z,1516702664.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:44.913Z,1516702664.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:44.933Z,1516702664.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:45.316Z,1516702665.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:45.341Z,1516702665.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:45.716Z,1516702665.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:45.731Z,1516702665.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:46.092Z,1516702666.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:46.129Z,1516702666.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:46.493Z,1516702666.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:46.529Z,1516702666.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:46.893Z,1516702666.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:46.925Z,1516702666.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:47.292Z,1516702667.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:47.329Z,1516702667.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:47.703Z,1516702667.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:47.745Z,1516702667.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:48.103Z,1516702668.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:48.137Z,1516702668.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:48.515Z,1516702668.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:48.530Z,1516702668.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:48.893Z,1516702668.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:48.929Z,1516702668.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:49.296Z,1516702669.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:49.329Z,1516702669.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:49.715Z,1516702669.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:49.730Z,1516702669.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:50.115Z,1516702670.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:50.134Z,1516702670.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:50.515Z,1516702670.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:50.530Z,1516702670.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:50.893Z,1516702670.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:50.916Z,1516702670.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:51.293Z,1516702671.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:51.308Z,1516702671.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:51.703Z,1516702671.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:51.739Z,1516702671.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:52.115Z,1516702672.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:52.149Z,1516702672.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:52.515Z,1516702672.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:52.549Z,1516702672.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:52.897Z,1516702672.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:52.913Z,1516702672.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:53.298Z,1516702673.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:53.317Z,1516702673.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:53.708Z,1516702673.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:53.723Z,1516702673.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:54.104Z,1516702674.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:54.118Z,1516702674.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:54.503Z,1516702674.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:54.518Z,1516702674.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:54.898Z,1516702674.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:54.924Z,1516702674.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:55.302Z,1516702675.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:55.325Z,1516702675.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:55.719Z,1516702675.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:55.755Z,1516702675.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:56.115Z,1516702676.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:56.130Z,1516702676.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:56.510Z,1516702676.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:56.525Z,1516702676.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:56.898Z,1516702676.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:56.928Z,1516702676.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:57.307Z,1516702677.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:57.322Z,1516702677.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:57.708Z,1516702677.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:57.737Z,1516702677.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:58.115Z,1516702678.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:58.137Z,1516702678.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:58.513Z,1516702678.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:58.528Z,1516702678.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:58.900Z,1516702678.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:58.921Z,1516702678.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:59.295Z,1516702679.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:59.333Z,1516702679.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:17:59.716Z,1516702679.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:17:59.732Z,1516702679.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:00.115Z,1516702680.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:00.130Z,1516702680.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:00.512Z,1516702680.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:00.533Z,1516702680.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:00.894Z,1516702680.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:00.926Z,1516702680.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:01.293Z,1516702681.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:01.319Z,1516702681.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:01.723Z,1516702681.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:01.745Z,1516702681.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:04.808Z,1516702684.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:04.822Z,1516702684.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:04.936Z,1516702684.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:04.968Z,1516702684.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:05.277Z,1516702685.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:05.293Z,1516702685.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:05.678Z,1516702685.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:05.692Z,1516702685.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:06.070Z,1516702686.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:06.097Z,1516702686.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:06.469Z,1516702686.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:06.505Z,1516702686.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:06.891Z,1516702686.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:06.912Z,1516702686.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:07.291Z,1516702687.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:07.306Z,1516702687.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:07.691Z,1516702687.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:07.705Z,1516702687.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:08.067Z,1516702688.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:08.093Z,1516702688.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:08.480Z,1516702688.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:08.501Z,1516702688.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:08.881Z,1516702688.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:08.901Z,1516702688.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:09.267Z,1516702689.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:09.294Z,1516702689.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:09.682Z,1516702689.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:09.697Z,1516702689.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:10.094Z,1516702690.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:10.109Z,1516702690.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:10.494Z,1516702690.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:10.509Z,1516702690.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:10.889Z,1516702690.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:10.909Z,1516702690.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:11.270Z,1516702691.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:11.296Z,1516702691.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:11.685Z,1516702691.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:11.700Z,1516702691.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:12.081Z,1516702692.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:12.097Z,1516702692.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:12.466Z,1516702692.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:12.507Z,1516702692.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:12.884Z,1516702692.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:12.903Z,1516702692.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:13.286Z,1516702693.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:13.309Z,1516702693.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:13.691Z,1516702693.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:13.706Z,1516702693.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:14.064Z,1516702694.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:14.094Z,1516702694.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:14.467Z,1516702694.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:14.505Z,1516702694.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:14.871Z,1516702694.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:14.898Z,1516702694.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:15.269Z,1516702695.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:15.295Z,1516702695.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:15.674Z,1516702695.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:15.702Z,1516702695.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:16.081Z,1516702696.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:16.104Z,1516702696.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:16.488Z,1516702696.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:16.503Z,1516702696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:16.892Z,1516702696.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:16.907Z,1516702696.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:17.265Z,1516702697.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:17.300Z,1516702697.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:17.669Z,1516702697.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:17.697Z,1516702697.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:18.072Z,1516702698.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:18.099Z,1516702698.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:18.467Z,1516702698.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:18.504Z,1516702698.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:18.880Z,1516702698.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:18.906Z,1516702698.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:19.290Z,1516702699.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:19.305Z,1516702699.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:19.683Z,1516702699.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:19.709Z,1516702699.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:20.067Z,1516702700.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:20.095Z,1516702700.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:20.472Z,1516702700.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:20.513Z,1516702700.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:20.869Z,1516702700.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:20.899Z,1516702700.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:21.267Z,1516702701.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:21.302Z,1516702701.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:21.674Z,1516702701.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:21.701Z,1516702701.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:22.075Z,1516702702.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:22.113Z,1516702702.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:22.494Z,1516702702.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:22.509Z,1516702702.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:22.881Z,1516702702.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:22.908Z,1516702702.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:23.266Z,1516702703.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:23.281Z,1516702703.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:23.672Z,1516702703.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:23.707Z,1516702703.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:24.069Z,1516702704.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:24.108Z,1516702704.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:24.474Z,1516702704.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:24.489Z,1516702704.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:24.883Z,1516702704.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:24.917Z,1516702704.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:25.288Z,1516702705.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:25.315Z,1516702705.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:25.689Z,1516702705.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:25.712Z,1516702705.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:26.079Z,1516702706.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:26.093Z,1516702706.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:26.475Z,1516702706.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:26.490Z,1516702706.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:26.870Z,1516702706.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:26.912Z,1516702706.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:27.269Z,1516702707.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:27.309Z,1516702707.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:27.679Z,1516702707.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:27.694Z,1516702707.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:28.077Z,1516702708.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:28.092Z,1516702708.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:28.479Z,1516702708.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:28.518Z,1516702708.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:28.888Z,1516702708.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:28.920Z,1516702708.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:29.278Z,1516702709.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:29.301Z,1516702709.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:29.680Z,1516702709.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:29.695Z,1516702709.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:30.069Z,1516702710.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:30.106Z,1516702710.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:30.472Z,1516702710.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:30.491Z,1516702710.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:30.880Z,1516702710.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:30.896Z,1516702710.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:31.285Z,1516702711.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:31.305Z,1516702711.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:31.691Z,1516702711.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:31.725Z,1516702711.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:32.074Z,1516702712.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:32.101Z,1516702712.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:32.472Z,1516702712.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:32.503Z,1516702712.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:32.884Z,1516702712.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:32.899Z,1516702712.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:33.275Z,1516702713.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:33.308Z,1516702713.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:33.678Z,1516702713.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:33.702Z,1516702713.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:34.084Z,1516702714.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:34.100Z,1516702714.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:34.485Z,1516702714.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:34.499Z,1516702714.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:34.884Z,1516702714.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:34.923Z,1516702714.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:35.272Z,1516702715.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:35.295Z,1516702715.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:35.684Z,1516702715.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:35.701Z,1516702715.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:36.072Z,1516702716.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:36.097Z,1516702716.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:36.472Z,1516702716.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:36.507Z,1516702716.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:36.884Z,1516702716.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:36.906Z,1516702716.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:37.284Z,1516702717.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:37.303Z,1516702717.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:37.689Z,1516702717.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:37.705Z,1516702717.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:38.075Z,1516702718.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:38.101Z,1516702718.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:38.472Z,1516702718.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:38.492Z,1516702718.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:38.873Z,1516702718.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:38.897Z,1516702718.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:39.276Z,1516702719.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:39.294Z,1516702719.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:39.681Z,1516702719.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:39.697Z,1516702719.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:40.084Z,1516702720.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:40.100Z,1516702720.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:40.486Z,1516702720.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:40.504Z,1516702720.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:40.885Z,1516702720.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:40.902Z,1516702720.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:41.268Z,1516702721.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:41.309Z,1516702721.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:41.681Z,1516702721.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:41.697Z,1516702721.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:42.072Z,1516702722.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:42.094Z,1516702722.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:42.468Z,1516702722.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:42.495Z,1516702722.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:42.884Z,1516702722.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:42.899Z,1516702722.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:43.287Z,1516702723.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:43.303Z,1516702723.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:43.686Z,1516702723.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:43.706Z,1516702723.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:44.064Z,1516702724.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:44.095Z,1516702724.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:44.462Z,1516702724.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:44.490Z,1516702724.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:44.864Z,1516702724.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:44.896Z,1516702724.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:45.265Z,1516702725.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:45.305Z,1516702725.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:45.666Z,1516702725.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:45.702Z,1516702725.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:46.075Z,1516702726.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:46.113Z,1516702726.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:46.495Z,1516702726.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:46.511Z,1516702726.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:46.875Z,1516702726.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:46.909Z,1516702726.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:47.272Z,1516702727.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:47.318Z,1516702727.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:47.676Z,1516702727.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:47.691Z,1516702727.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:48.074Z,1516702728.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:48.089Z,1516702728.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:48.470Z,1516702728.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:48.493Z,1516702728.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:48.882Z,1516702728.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:48.901Z,1516702728.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:49.281Z,1516702729.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:49.301Z,1516702729.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:49.686Z,1516702729.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:49.702Z,1516702729.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:50.073Z,1516702730.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:50.092Z,1516702730.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:50.468Z,1516702730.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:50.491Z,1516702730.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:50.868Z,1516702730.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:50.891Z,1516702730.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:51.273Z,1516702731.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:51.289Z,1516702731.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:51.676Z,1516702731.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:51.691Z,1516702731.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:52.082Z,1516702732.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:52.099Z,1516702732.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:52.486Z,1516702732.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:52.509Z,1516702732.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:52.882Z,1516702732.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:52.897Z,1516702732.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:53.268Z,1516702733.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:53.293Z,1516702733.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:53.677Z,1516702733.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:53.692Z,1516702733.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:54.072Z,1516702734.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:54.092Z,1516702734.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:54.467Z,1516702734.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:54.500Z,1516702734.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:54.883Z,1516702734.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:54.898Z,1516702734.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:55.282Z,1516702735.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:55.298Z,1516702735.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:55.688Z,1516702735.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:55.702Z,1516702735.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:56.074Z,1516702736.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:56.092Z,1516702736.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:56.473Z,1516702736.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:56.493Z,1516702736.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:56.867Z,1516702736.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:56.900Z,1516702736.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:57.279Z,1516702737.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:57.293Z,1516702737.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:57.681Z,1516702737.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:57.696Z,1516702737.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:58.083Z,1516702738.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:58.098Z,1516702738.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:58.487Z,1516702738.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:58.510Z,1516702738.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:58.883Z,1516702738.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:58.898Z,1516702738.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:59.269Z,1516702739.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:59.291Z,1516702739.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:18:59.677Z,1516702739.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:18:59.692Z,1516702739.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:00.069Z,1516702740.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:00.092Z,1516702740.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:00.467Z,1516702740.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:00.500Z,1516702740.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:00.884Z,1516702740.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:00.898Z,1516702740.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:01.286Z,1516702741.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:01.302Z,1516702741.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:01.686Z,1516702741.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:01.702Z,1516702741.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:02.074Z,1516702742.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:02.096Z,1516702742.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:05.161Z,1516702745.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:05.185Z,1516702745.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:05.285Z,1516702745.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:05.332Z,1516702745.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:05.640Z,1516702745.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:05.655Z,1516702745.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:06.055Z,1516702746.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:06.079Z,1516702746.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:06.440Z,1516702746.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:06.455Z,1516702746.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:06.836Z,1516702746.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:06.851Z,1516702746.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:07.238Z,1516702747.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:07.253Z,1516702747.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:07.636Z,1516702747.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:07.651Z,1516702747.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:08.055Z,1516702748.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:08.077Z,1516702748.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:08.443Z,1516702748.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:08.483Z,1516702748.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:08.844Z,1516702748.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:08.859Z,1516702748.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:09.235Z,1516702749.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:09.256Z,1516702749.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:09.637Z,1516702749.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:09.652Z,1516702749.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:10.034Z,1516702750.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:10.058Z,1516702750.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:10.436Z,1516702750.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:10.452Z,1516702750.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:10.845Z,1516702750.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:10.860Z,1516702750.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:11.244Z,1516702751.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:11.265Z,1516702751.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:11.642Z,1516702751.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:11.658Z,1516702751.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:12.039Z,1516702752.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:12.054Z,1516702752.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:12.436Z,1516702752.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:12.455Z,1516702752.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:12.842Z,1516702752.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:12.857Z,1516702752.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:13.244Z,1516702753.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:13.264Z,1516702753.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:13.656Z,1516702753.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:13.690Z,1516702753.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:14.042Z,1516702754.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:14.057Z,1516702754.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:14.439Z,1516702754.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:14.454Z,1516702754.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:14.833Z,1516702754.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:14.861Z,1516702754.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:15.243Z,1516702755.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:15.258Z,1516702755.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:15.640Z,1516702755.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:15.655Z,1516702755.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:16.044Z,1516702756.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:16.073Z,1516702756.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:16.450Z,1516702756.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:16.465Z,1516702756.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:16.848Z,1516702756.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:16.863Z,1516702756.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:17.232Z,1516702757.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:17.268Z,1516702757.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:17.632Z,1516702757.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:17.661Z,1516702757.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:18.038Z,1516702758.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:18.053Z,1516702758.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:18.432Z,1516702758.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:18.461Z,1516702758.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:18.847Z,1516702758.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:18.865Z,1516702758.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:19.250Z,1516702759.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:19.266Z,1516702759.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:19.651Z,1516702759.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:19.666Z,1516702759.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:20.036Z,1516702760.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:20.056Z,1516702760.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:20.428Z,1516702760.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:20.460Z,1516702760.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:20.848Z,1516702760.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:20.863Z,1516702760.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:21.248Z,1516702761.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:21.275Z,1516702761.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:21.652Z,1516702761.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:21.666Z,1516702761.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:22.033Z,1516702762.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:22.060Z,1516702762.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:22.428Z,1516702762.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:22.465Z,1516702762.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:22.843Z,1516702762.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:22.866Z,1516702762.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:23.243Z,1516702763.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:23.265Z,1516702763.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:23.644Z,1516702763.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:23.666Z,1516702763.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:24.029Z,1516702764.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:24.061Z,1516702764.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:24.432Z,1516702764.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:24.465Z,1516702764.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:24.844Z,1516702764.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:24.866Z,1516702764.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:25.259Z,1516702765.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:25.273Z,1516702765.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:25.654Z,1516702765.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:25.681Z,1516702765.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:26.029Z,1516702766.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:26.061Z,1516702766.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:26.432Z,1516702766.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:26.465Z,1516702766.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:26.840Z,1516702766.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:26.861Z,1516702766.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:27.243Z,1516702767.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:27.258Z,1516702767.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:27.643Z,1516702767.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:27.674Z,1516702767.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:28.033Z,1516702768.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:28.060Z,1516702768.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:28.428Z,1516702768.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:28.461Z,1516702768.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:28.853Z,1516702768.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:28.867Z,1516702768.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:29.239Z,1516702769.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:29.273Z,1516702769.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:29.652Z,1516702769.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:29.666Z,1516702769.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:30.029Z,1516702770.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:30.065Z,1516702770.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:30.432Z,1516702770.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:30.464Z,1516702770.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:30.839Z,1516702770.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:30.876Z,1516702770.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:31.253Z,1516702771.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:31.268Z,1516702771.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:31.652Z,1516702771.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:31.679Z,1516702771.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:32.030Z,1516702772.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:32.065Z,1516702772.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:32.429Z,1516702772.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:32.466Z,1516702772.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:32.840Z,1516702772.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:32.876Z,1516702772.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:33.248Z,1516702773.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:33.273Z,1516702773.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:33.640Z,1516702773.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:33.666Z,1516702773.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:34.029Z,1516702774.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:34.057Z,1516702774.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:34.437Z,1516702774.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:34.469Z,1516702774.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:34.839Z,1516702774.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:34.874Z,1516702774.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:35.244Z,1516702775.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:35.281Z,1516702775.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:35.652Z,1516702775.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:35.679Z,1516702775.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:36.033Z,1516702776.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:36.048Z,1516702776.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:36.441Z,1516702776.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:36.457Z,1516702776.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:36.844Z,1516702776.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:36.859Z,1516702776.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:37.243Z,1516702777.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:37.258Z,1516702777.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:37.644Z,1516702777.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:37.665Z,1516702777.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:38.040Z,1516702778.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:38.061Z,1516702778.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:38.441Z,1516702778.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:38.456Z,1516702778.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:38.842Z,1516702778.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:38.865Z,1516702778.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:39.248Z,1516702779.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:39.263Z,1516702779.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:39.647Z,1516702779.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:39.662Z,1516702779.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:40.036Z,1516702780.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:40.055Z,1516702780.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:40.432Z,1516702780.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:40.454Z,1516702780.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:40.846Z,1516702780.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:40.861Z,1516702780.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:41.246Z,1516702781.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:41.261Z,1516702781.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:41.647Z,1516702781.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:41.662Z,1516702781.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:42.038Z,1516702782.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:42.053Z,1516702782.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:42.440Z,1516702782.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:42.461Z,1516702782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:42.846Z,1516702782.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:42.861Z,1516702782.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:43.247Z,1516702783.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:43.262Z,1516702783.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:43.648Z,1516702783.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:43.670Z,1516702783.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:44.036Z,1516702784.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:44.059Z,1516702784.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:44.445Z,1516702784.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:44.460Z,1516702784.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:44.847Z,1516702784.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:44.862Z,1516702784.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:45.248Z,1516702785.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:45.275Z,1516702785.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:45.653Z,1516702785.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:45.668Z,1516702785.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:46.026Z,1516702786.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:46.053Z,1516702786.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:46.429Z,1516702786.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:46.465Z,1516702786.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:46.832Z,1516702786.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:46.859Z,1516702786.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:47.243Z,1516702787.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:47.279Z,1516702787.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:47.649Z,1516702787.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:47.670Z,1516702787.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:48.049Z,1516702788.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:48.068Z,1516702788.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:48.433Z,1516702788.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:48.460Z,1516702788.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:48.829Z,1516702788.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:48.864Z,1516702788.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:49.229Z,1516702789.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:49.265Z,1516702789.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:49.632Z,1516702789.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:49.665Z,1516702789.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:50.047Z,1516702790.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:50.071Z,1516702790.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:50.457Z,1516702790.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:50.472Z,1516702790.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:50.839Z,1516702790.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:50.873Z,1516702790.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:51.228Z,1516702791.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:51.266Z,1516702791.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:51.628Z,1516702791.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:51.667Z,1516702791.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:51.667Z,1516702791.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141 2018-01-23T10:19:51.667Z,1516702791.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:19:51.669Z,1516702791.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:51.669Z,1516702791.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 141 2018-01-23T10:19:51.669Z,1516702791.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:19:51.670Z,1516702791.670 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:51.671Z,1516702791.671 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141 2018-01-23T10:19:51.671Z,1516702791.671 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:19:51.682Z,1516702791.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:19:51.682Z,1516702791.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:19:51.683Z,1516702791.683 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:19:52.029Z,1516702792.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:52.087Z,1516702792.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:19:52.087Z,1516702792.087 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141 2018-01-23T10:19:52.088Z,1516702792.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:19:52.088Z,1516702792.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 141 2018-01-23T10:19:52.088Z,1516702792.088 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:19:52.088Z,1516702792.088 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141 2018-01-23T10:19:52.437Z,1516702792.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:52.467Z,1516702792.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:19:52.468Z,1516702792.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:19:52.468Z,1516702792.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:19:52.468Z,1516702792.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:19:52.469Z,1516702792.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:19:52.469Z,1516702792.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:19:52.469Z,1516702792.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:19:52.470Z,1516702792.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:19:52.470Z,1516702792.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:19:52.832Z,1516702792.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:52.847Z,1516702792.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:19:52.848Z,1516702792.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:53.247Z,1516702793.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:53.278Z,1516702793.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:19:53.283Z,1516702793.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:53.644Z,1516702793.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:53.658Z,1516702793.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:19:53.659Z,1516702793.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:54.039Z,1516702794.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:54.060Z,1516702794.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:19:54.061Z,1516702794.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:54.438Z,1516702794.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:54.453Z,1516702794.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:19:54.454Z,1516702794.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:54.836Z,1516702794.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:54.851Z,1516702794.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:19:54.852Z,1516702794.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:55.238Z,1516702795.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:55.252Z,1516702795.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:19:55.253Z,1516702795.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:55.636Z,1516702795.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:55.651Z,1516702795.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:19:55.652Z,1516702795.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:56.040Z,1516702796.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:56.055Z,1516702796.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:19:56.056Z,1516702796.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:56.444Z,1516702796.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:56.464Z,1516702796.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:19:56.465Z,1516702796.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:56.840Z,1516702796.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:56.855Z,1516702796.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:19:56.856Z,1516702796.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:57.235Z,1516702797.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:57.250Z,1516702797.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:19:57.252Z,1516702797.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:57.636Z,1516702797.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:57.651Z,1516702797.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:19:57.652Z,1516702797.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:58.032Z,1516702798.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:58.054Z,1516702798.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:19:58.060Z,1516702798.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:58.440Z,1516702798.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:58.460Z,1516702798.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:19:58.461Z,1516702798.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:58.837Z,1516702798.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:58.851Z,1516702798.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:19:58.852Z,1516702798.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:59.242Z,1516702799.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:59.260Z,1516702799.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:19:59.261Z,1516702799.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:19:59.644Z,1516702799.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:19:59.658Z,1516702799.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:19:59.659Z,1516702799.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:00.042Z,1516702800.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:00.064Z,1516702800.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:20:00.065Z,1516702800.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:00.438Z,1516702800.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:00.453Z,1516702800.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:20:00.454Z,1516702800.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:00.836Z,1516702800.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:00.850Z,1516702800.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:20:00.852Z,1516702800.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:01.238Z,1516702801.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:01.252Z,1516702801.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:20:01.253Z,1516702801.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:01.256Z,1516702801.256 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T10:20:01.256Z,1516702801.256 [Default:CheckIn:C.Wait] Stopped 2018-01-23T10:20:01.256Z,1516702801.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T10:20:01.256Z,1516702801.256 [Default:CheckIn:D] Running Loop=1 2018-01-23T10:20:01.636Z,1516702801.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:01.651Z,1516702801.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:20:01.652Z,1516702801.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:01.655Z,1516702801.655 [Default:CheckIn:D] Stopped 2018-01-23T10:20:01.655Z,1516702801.655 [Default:CheckIn:E] Running Loop=1 2018-01-23T10:20:02.049Z,1516702802.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:02.064Z,1516702802.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:20:02.065Z,1516702802.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 422.159928 min 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn:E] Stopped 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn] Stopped 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn](INFO): Running loop #42 2018-01-23T10:20:02.069Z,1516702802.069 [Default:CheckIn] Running Loop=42 2018-01-23T10:20:02.070Z,1516702802.070 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T10:20:02.070Z,1516702802.070 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T10:20:02.451Z,1516702802.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:02.465Z,1516702802.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:20:02.466Z,1516702802.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:05.543Z,1516702805.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:05.559Z,1516702805.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T10:20:05.560Z,1516702805.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:05.666Z,1516702805.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:05.694Z,1516702805.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:20:05.696Z,1516702805.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:06.016Z,1516702806.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:06.052Z,1516702806.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:20:06.053Z,1516702806.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:06.421Z,1516702806.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:06.453Z,1516702806.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:20:06.453Z,1516702806.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:06.804Z,1516702806.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:06.818Z,1516702806.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:20:06.819Z,1516702806.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:07.227Z,1516702807.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:07.256Z,1516702807.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:20:07.257Z,1516702807.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:07.640Z,1516702807.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:07.662Z,1516702807.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:20:07.663Z,1516702807.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:08.015Z,1516702808.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:08.030Z,1516702808.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:20:08.043Z,1516702808.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:08.409Z,1516702808.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:08.428Z,1516702808.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:20:08.429Z,1516702808.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:08.816Z,1516702808.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:08.830Z,1516702808.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:20:08.831Z,1516702808.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:09.212Z,1516702809.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:09.230Z,1516702809.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:20:09.231Z,1516702809.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:09.613Z,1516702809.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:09.628Z,1516702809.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:20:09.629Z,1516702809.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:10.016Z,1516702810.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:10.030Z,1516702810.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:20:10.031Z,1516702810.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:10.420Z,1516702810.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:10.440Z,1516702810.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:20:10.441Z,1516702810.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:10.820Z,1516702810.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:10.835Z,1516702810.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:20:10.836Z,1516702810.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:11.218Z,1516702811.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:11.232Z,1516702811.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:20:11.233Z,1516702811.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:11.616Z,1516702811.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:11.631Z,1516702811.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:20:11.632Z,1516702811.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:12.012Z,1516702812.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:12.028Z,1516702812.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:12.414Z,1516702812.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:12.429Z,1516702812.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:12.809Z,1516702812.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:12.829Z,1516702812.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:13.217Z,1516702813.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:13.237Z,1516702813.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:13.619Z,1516702813.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:13.634Z,1516702813.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:14.023Z,1516702814.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:14.038Z,1516702814.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:14.408Z,1516702814.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:14.430Z,1516702814.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:14.813Z,1516702814.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:14.827Z,1516702814.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:15.212Z,1516702815.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:15.231Z,1516702815.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:15.608Z,1516702815.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:15.639Z,1516702815.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:16.022Z,1516702816.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:16.042Z,1516702816.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:16.434Z,1516702816.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:16.449Z,1516702816.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:16.827Z,1516702816.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:16.842Z,1516702816.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:17.204Z,1516702817.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:17.236Z,1516702817.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:17.608Z,1516702817.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:17.635Z,1516702817.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:18.004Z,1516702818.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:18.037Z,1516702818.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:18.405Z,1516702818.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:18.436Z,1516702818.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:18.802Z,1516702818.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:18.837Z,1516702818.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:19.220Z,1516702819.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:19.250Z,1516702819.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:19.625Z,1516702819.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:19.658Z,1516702819.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:20.023Z,1516702820.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:20.038Z,1516702820.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:20.411Z,1516702820.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:20.437Z,1516702820.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:20.805Z,1516702820.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:20.837Z,1516702820.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:21.205Z,1516702821.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:21.240Z,1516702821.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:21.604Z,1516702821.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:21.636Z,1516702821.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:22.023Z,1516702822.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:22.042Z,1516702822.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:22.431Z,1516702822.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:22.453Z,1516702822.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:22.823Z,1516702822.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:22.838Z,1516702822.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:23.204Z,1516702823.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:23.237Z,1516702823.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:23.608Z,1516702823.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:23.635Z,1516702823.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:24.004Z,1516702824.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:24.037Z,1516702824.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:24.409Z,1516702824.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:24.437Z,1516702824.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:24.803Z,1516702824.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:24.826Z,1516702824.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:25.227Z,1516702825.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:25.243Z,1516702825.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:25.629Z,1516702825.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:25.644Z,1516702825.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:26.016Z,1516702826.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:26.051Z,1516702826.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:26.409Z,1516702826.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:26.441Z,1516702826.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:26.805Z,1516702826.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:26.841Z,1516702826.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:27.210Z,1516702827.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:27.241Z,1516702827.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:27.604Z,1516702827.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:27.645Z,1516702827.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:28.020Z,1516702828.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:28.047Z,1516702828.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:28.420Z,1516702828.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:28.457Z,1516702828.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:28.824Z,1516702828.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:28.851Z,1516702828.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:29.216Z,1516702829.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:29.251Z,1516702829.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:29.609Z,1516702829.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:29.625Z,1516702829.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:30.010Z,1516702830.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:30.025Z,1516702830.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:30.414Z,1516702830.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:30.428Z,1516702830.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:30.809Z,1516702830.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:30.832Z,1516702830.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:31.216Z,1516702831.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:31.232Z,1516702831.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:31.619Z,1516702831.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:31.634Z,1516702831.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:32.016Z,1516702832.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:32.032Z,1516702832.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:32.411Z,1516702832.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:32.427Z,1516702832.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:32.812Z,1516702832.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:32.827Z,1516702832.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:33.208Z,1516702833.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:33.230Z,1516702833.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:33.612Z,1516702833.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:33.627Z,1516702833.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:34.018Z,1516702834.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:34.033Z,1516702834.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:34.419Z,1516702834.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:34.434Z,1516702834.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:34.816Z,1516702834.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:34.837Z,1516702834.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:35.213Z,1516702835.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:35.228Z,1516702835.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:35.612Z,1516702835.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:35.627Z,1516702835.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:36.008Z,1516702836.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:36.037Z,1516702836.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:36.417Z,1516702836.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:36.431Z,1516702836.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:36.809Z,1516702836.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:36.828Z,1516702836.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:37.217Z,1516702837.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:37.237Z,1516702837.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:37.619Z,1516702837.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:37.633Z,1516702837.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:38.018Z,1516702838.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:38.037Z,1516702838.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:38.412Z,1516702838.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:38.427Z,1516702838.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:38.813Z,1516702838.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:38.828Z,1516702838.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:39.212Z,1516702839.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:39.231Z,1516702839.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:39.612Z,1516702839.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:39.627Z,1516702839.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:40.031Z,1516702840.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:40.046Z,1516702840.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:40.423Z,1516702840.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:40.438Z,1516702840.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:40.818Z,1516702840.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:40.841Z,1516702840.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:41.217Z,1516702841.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:41.231Z,1516702841.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:41.616Z,1516702841.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:41.632Z,1516702841.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:42.008Z,1516702842.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:42.030Z,1516702842.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:42.414Z,1516702842.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:42.429Z,1516702842.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:42.809Z,1516702842.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:42.829Z,1516702842.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:43.222Z,1516702843.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:43.241Z,1516702843.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:43.623Z,1516702843.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:43.637Z,1516702843.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:44.023Z,1516702844.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:44.038Z,1516702844.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:44.412Z,1516702844.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:44.427Z,1516702844.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:44.813Z,1516702844.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:44.828Z,1516702844.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:45.218Z,1516702845.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:45.233Z,1516702845.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:45.608Z,1516702845.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:45.635Z,1516702845.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:46.027Z,1516702846.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:46.042Z,1516702846.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:46.426Z,1516702846.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:46.441Z,1516702846.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:46.823Z,1516702846.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:46.838Z,1516702846.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:47.211Z,1516702847.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:47.236Z,1516702847.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:47.609Z,1516702847.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:47.641Z,1516702847.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:48.016Z,1516702848.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:48.043Z,1516702848.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:48.405Z,1516702848.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:48.441Z,1516702848.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:48.803Z,1516702848.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:48.818Z,1516702848.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:49.215Z,1516702849.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:49.242Z,1516702849.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:49.636Z,1516702849.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:49.651Z,1516702849.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:50.016Z,1516702850.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:50.042Z,1516702850.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:50.405Z,1516702850.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:50.441Z,1516702850.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:50.805Z,1516702850.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:50.824Z,1516702850.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:51.209Z,1516702851.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:51.225Z,1516702851.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:51.612Z,1516702851.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:51.649Z,1516702851.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:52.024Z,1516702852.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:52.056Z,1516702852.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:52.428Z,1516702852.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:52.452Z,1516702852.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:52.827Z,1516702852.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:52.857Z,1516702852.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:53.217Z,1516702853.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:53.259Z,1516702853.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:53.605Z,1516702853.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:53.625Z,1516702853.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:54.009Z,1516702854.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:54.032Z,1516702854.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:54.414Z,1516702854.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:54.429Z,1516702854.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:54.808Z,1516702854.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:54.827Z,1516702854.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:55.215Z,1516702855.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:55.230Z,1516702855.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:55.619Z,1516702855.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:55.634Z,1516702855.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:56.016Z,1516702856.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:56.030Z,1516702856.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:56.417Z,1516702856.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:56.433Z,1516702856.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:56.812Z,1516702856.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:56.827Z,1516702856.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:57.210Z,1516702857.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:57.229Z,1516702857.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:57.612Z,1516702857.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:57.627Z,1516702857.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:58.018Z,1516702858.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:58.034Z,1516702858.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:58.419Z,1516702858.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:58.434Z,1516702858.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:58.817Z,1516702858.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:58.837Z,1516702858.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:59.217Z,1516702859.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:59.232Z,1516702859.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:20:59.618Z,1516702859.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:20:59.633Z,1516702859.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:00.012Z,1516702860.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:00.033Z,1516702860.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:00.412Z,1516702860.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:00.432Z,1516702860.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:00.813Z,1516702860.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:00.828Z,1516702860.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:01.218Z,1516702861.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:01.241Z,1516702861.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:01.623Z,1516702861.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:01.645Z,1516702861.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:02.022Z,1516702862.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:02.037Z,1516702862.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:02.413Z,1516702862.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:02.428Z,1516702862.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:02.809Z,1516702862.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:02.833Z,1516702862.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:05.898Z,1516702865.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:05.921Z,1516702865.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:06.025Z,1516702866.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:06.045Z,1516702866.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:06.383Z,1516702866.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:06.398Z,1516702866.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:06.788Z,1516702866.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:06.828Z,1516702866.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:07.182Z,1516702867.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:07.197Z,1516702867.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:07.582Z,1516702867.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:07.597Z,1516702867.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:07.980Z,1516702867.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:07.996Z,1516702867.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:08.376Z,1516702868.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:08.396Z,1516702868.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:08.786Z,1516702868.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:08.802Z,1516702868.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:09.182Z,1516702869.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:09.198Z,1516702869.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:09.583Z,1516702869.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:09.598Z,1516702869.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:09.982Z,1516702869.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:10.001Z,1516702870.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:10.381Z,1516702870.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:10.396Z,1516702870.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:10.772Z,1516702870.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:10.792Z,1516702870.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:11.173Z,1516702871.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:11.196Z,1516702871.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:11.574Z,1516702871.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:11.599Z,1516702871.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:11.988Z,1516702871.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:12.012Z,1516702872.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:12.394Z,1516702872.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:12.409Z,1516702872.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:12.792Z,1516702872.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:12.807Z,1516702872.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:13.166Z,1516702873.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:13.198Z,1516702873.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:13.585Z,1516702873.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:13.601Z,1516702873.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:13.973Z,1516702873.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:13.999Z,1516702873.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:14.388Z,1516702874.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:14.403Z,1516702874.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:14.788Z,1516702874.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:14.815Z,1516702874.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:15.192Z,1516702875.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:15.207Z,1516702875.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:15.570Z,1516702875.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:15.594Z,1516702875.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:15.968Z,1516702875.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:16.004Z,1516702876.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:16.369Z,1516702876.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:16.413Z,1516702876.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:16.772Z,1516702876.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:16.787Z,1516702876.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:17.188Z,1516702877.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:17.213Z,1516702877.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:17.587Z,1516702877.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:17.614Z,1516702877.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:17.984Z,1516702877.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:18.015Z,1516702878.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:18.381Z,1516702878.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:18.417Z,1516702878.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:18.779Z,1516702878.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:18.794Z,1516702878.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:19.178Z,1516702879.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:19.194Z,1516702879.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:19.574Z,1516702879.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:19.605Z,1516702879.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:19.983Z,1516702879.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:19.998Z,1516702879.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:20.384Z,1516702880.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:20.399Z,1516702880.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:20.795Z,1516702880.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:20.817Z,1516702880.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:21.177Z,1516702881.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:21.196Z,1516702881.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:21.582Z,1516702881.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:21.597Z,1516702881.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:21.976Z,1516702881.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:22.003Z,1516702882.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:22.395Z,1516702882.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:22.410Z,1516702882.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:22.782Z,1516702882.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:22.797Z,1516702882.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:23.186Z,1516702883.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:23.205Z,1516702883.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:23.581Z,1516702883.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:23.596Z,1516702883.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:23.978Z,1516702883.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:24.005Z,1516702884.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:24.383Z,1516702884.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:24.398Z,1516702884.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:24.770Z,1516702884.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:24.805Z,1516702884.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:25.182Z,1516702885.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:25.207Z,1516702885.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:25.596Z,1516702885.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:25.617Z,1516702885.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:25.995Z,1516702885.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:26.016Z,1516702886.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:26.367Z,1516702886.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:26.396Z,1516702886.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:26.770Z,1516702886.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:26.805Z,1516702886.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:27.185Z,1516702887.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:27.205Z,1516702887.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:27.586Z,1516702887.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:27.621Z,1516702887.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:27.974Z,1516702887.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:28.001Z,1516702888.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:28.386Z,1516702888.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:28.410Z,1516702888.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:28.784Z,1516702888.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:28.805Z,1516702888.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:29.198Z,1516702889.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:29.213Z,1516702889.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:29.569Z,1516702889.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:29.620Z,1516702889.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:29.968Z,1516702889.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:30.001Z,1516702890.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:30.375Z,1516702890.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:30.402Z,1516702890.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:30.790Z,1516702890.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:30.805Z,1516702890.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:31.187Z,1516702891.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:31.209Z,1516702891.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:31.588Z,1516702891.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:31.610Z,1516702891.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:31.984Z,1516702891.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:32.021Z,1516702892.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:32.373Z,1516702892.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:32.404Z,1516702892.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:32.768Z,1516702892.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:32.812Z,1516702892.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:33.170Z,1516702893.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:33.180Z,1516702893.180 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T10:21:33.224Z,1516702893.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:33.576Z,1516702893.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:33.611Z,1516702893.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:33.975Z,1516702893.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:33.993Z,1516702893.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:34.388Z,1516702894.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:34.420Z,1516702894.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:34.785Z,1516702894.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:34.819Z,1516702894.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:35.196Z,1516702895.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:35.225Z,1516702895.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:35.576Z,1516702895.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:35.593Z,1516702895.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:35.973Z,1516702895.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:35.997Z,1516702895.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:36.378Z,1516702896.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:36.389Z,1516702896.389 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T10:21:36.428Z,1516702896.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:36.775Z,1516702896.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:36.798Z,1516702896.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:37.192Z,1516702897.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:37.222Z,1516702897.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:37.584Z,1516702897.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:37.602Z,1516702897.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:37.993Z,1516702897.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:38.026Z,1516702898.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:38.378Z,1516702898.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:38.394Z,1516702898.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:38.773Z,1516702898.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:38.801Z,1516702898.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:39.182Z,1516702899.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:39.228Z,1516702899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:39.578Z,1516702899.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:39.589Z,1516702899.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x59998 got:0x14108 2018-01-23T10:21:39.633Z,1516702899.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:39.973Z,1516702899.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:40.009Z,1516702900.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:40.392Z,1516702900.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:40.413Z,1516702900.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:40.792Z,1516702900.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:40.809Z,1516702900.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:41.189Z,1516702901.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:41.209Z,1516702901.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:41.580Z,1516702901.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:41.604Z,1516702901.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:41.972Z,1516702901.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:42.008Z,1516702902.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:42.370Z,1516702902.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:42.413Z,1516702902.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:42.773Z,1516702902.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:42.813Z,1516702902.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:43.195Z,1516702903.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:43.216Z,1516702903.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:43.590Z,1516702903.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:43.613Z,1516702903.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:43.995Z,1516702903.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:44.012Z,1516702904.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:44.369Z,1516702904.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:44.421Z,1516702904.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:44.773Z,1516702904.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:44.798Z,1516702904.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x37231 got:0x16840 2018-01-23T10:21:44.825Z,1516702904.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:45.176Z,1516702905.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:45.209Z,1516702905.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:45.570Z,1516702905.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:45.608Z,1516702905.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:45.968Z,1516702905.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:46.008Z,1516702906.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:46.396Z,1516702906.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:46.416Z,1516702906.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:46.786Z,1516702906.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:46.824Z,1516702906.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:47.179Z,1516702907.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:47.232Z,1516702907.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:47.572Z,1516702907.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:47.609Z,1516702907.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:47.968Z,1516702907.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:48.006Z,1516702908.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:48.376Z,1516702908.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:48.409Z,1516702908.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:48.776Z,1516702908.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:48.817Z,1516702908.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:49.183Z,1516702909.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:49.221Z,1516702909.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:49.593Z,1516702909.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:49.618Z,1516702909.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:49.993Z,1516702909.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:50.017Z,1516702910.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:50.380Z,1516702910.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:50.428Z,1516702910.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:50.779Z,1516702910.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:50.818Z,1516702910.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:51.176Z,1516702911.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:51.195Z,1516702911.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:51.574Z,1516702911.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:51.600Z,1516702911.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:51.976Z,1516702911.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:52.027Z,1516702912.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:52.382Z,1516702912.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:52.408Z,1516702912.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:52.783Z,1516702912.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:52.802Z,1516702912.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:53.185Z,1516702913.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:53.201Z,1516702913.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:53.568Z,1516702913.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:53.605Z,1516702913.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:53.968Z,1516702913.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:54.006Z,1516702914.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:54.369Z,1516702914.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:54.384Z,1516702914.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:54.772Z,1516702914.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:54.791Z,1516702914.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:55.188Z,1516702915.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:55.224Z,1516702915.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:55.595Z,1516702915.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:55.629Z,1516702915.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:55.991Z,1516702915.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:56.019Z,1516702916.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:56.376Z,1516702916.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:56.421Z,1516702916.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:56.772Z,1516702916.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:56.816Z,1516702916.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:57.176Z,1516702917.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:57.191Z,1516702917.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:57.574Z,1516702917.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:57.607Z,1516702917.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:57.974Z,1516702917.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:58.001Z,1516702918.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:58.387Z,1516702918.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:58.402Z,1516702918.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:58.784Z,1516702918.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:58.810Z,1516702918.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:59.187Z,1516702919.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:59.206Z,1516702919.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:59.594Z,1516702919.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:21:59.611Z,1516702919.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:21:59.981Z,1516702919.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:00.013Z,1516702920.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:00.382Z,1516702920.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:00.397Z,1516702920.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:00.778Z,1516702920.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:00.793Z,1516702920.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:01.191Z,1516702921.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:01.209Z,1516702921.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:01.591Z,1516702921.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:01.633Z,1516702921.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:01.988Z,1516702921.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:02.008Z,1516702922.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:02.379Z,1516702922.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:02.394Z,1516702922.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:02.773Z,1516702922.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:02.799Z,1516702922.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:03.176Z,1516702923.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:03.205Z,1516702923.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:06.273Z,1516702926.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:06.288Z,1516702926.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:06.382Z,1516702926.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:06.410Z,1516702926.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:06.743Z,1516702926.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:06.759Z,1516702926.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:07.160Z,1516702927.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:07.298Z,1516702927.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:07.555Z,1516702927.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:07.570Z,1516702927.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:07.939Z,1516702927.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:07.954Z,1516702927.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:08.338Z,1516702928.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:08.357Z,1516702928.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:08.737Z,1516702928.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:08.756Z,1516702928.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:09.145Z,1516702929.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:09.165Z,1516702929.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:09.547Z,1516702929.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:09.562Z,1516702929.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:09.946Z,1516702929.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:09.961Z,1516702929.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:10.340Z,1516702930.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:10.361Z,1516702930.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:10.744Z,1516702930.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:10.765Z,1516702930.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:11.144Z,1516702931.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:11.160Z,1516702931.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:11.537Z,1516702931.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:11.558Z,1516702931.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:11.941Z,1516702931.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:11.956Z,1516702931.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:12.346Z,1516702932.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:12.362Z,1516702932.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:12.747Z,1516702932.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:12.762Z,1516702932.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:13.146Z,1516702933.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:13.173Z,1516702933.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:13.545Z,1516702933.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:13.560Z,1516702933.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:13.935Z,1516702933.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:13.968Z,1516702933.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:14.344Z,1516702934.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:14.362Z,1516702934.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:14.736Z,1516702934.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:14.759Z,1516702934.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:15.155Z,1516702935.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:15.171Z,1516702935.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:15.555Z,1516702935.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:15.570Z,1516702935.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:15.953Z,1516702935.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:15.968Z,1516702935.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:16.336Z,1516702936.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:16.368Z,1516702936.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:16.733Z,1516702936.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:16.767Z,1516702936.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:17.132Z,1516702937.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:17.170Z,1516702937.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:17.533Z,1516702937.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:17.569Z,1516702937.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:17.933Z,1516702937.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:17.965Z,1516702937.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:18.343Z,1516702938.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:18.379Z,1516702938.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:18.747Z,1516702938.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:18.786Z,1516702938.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:19.143Z,1516702939.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:19.173Z,1516702939.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:19.533Z,1516702939.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:19.573Z,1516702939.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:19.941Z,1516702939.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:19.979Z,1516702939.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:20.338Z,1516702940.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:20.353Z,1516702940.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:20.741Z,1516702940.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:20.777Z,1516702940.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:21.152Z,1516702941.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:21.188Z,1516702941.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:21.556Z,1516702941.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:21.588Z,1516702941.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:21.956Z,1516702941.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:21.987Z,1516702941.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:22.340Z,1516702942.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:22.359Z,1516702942.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:22.741Z,1516702942.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:22.756Z,1516702942.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:23.140Z,1516702943.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:23.155Z,1516702943.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:23.537Z,1516702943.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:23.564Z,1516702943.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:23.943Z,1516702943.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:23.957Z,1516702943.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:24.346Z,1516702944.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:24.365Z,1516702944.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:24.752Z,1516702944.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:24.771Z,1516702944.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:25.151Z,1516702945.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:25.165Z,1516702945.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:25.532Z,1516702945.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:25.559Z,1516702945.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:25.932Z,1516702945.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:25.965Z,1516702945.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:26.333Z,1516702946.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:26.368Z,1516702946.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:26.732Z,1516702946.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:26.758Z,1516702946.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:27.148Z,1516702947.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:27.178Z,1516702947.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:27.555Z,1516702947.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:27.570Z,1516702947.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:27.951Z,1516702947.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:27.966Z,1516702947.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:28.333Z,1516702948.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:28.365Z,1516702948.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:28.732Z,1516702948.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:28.767Z,1516702948.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:29.151Z,1516702949.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:29.166Z,1516702949.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:29.552Z,1516702949.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:29.579Z,1516702949.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:29.943Z,1516702949.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:29.978Z,1516702949.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:30.333Z,1516702950.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:30.364Z,1516702950.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:30.736Z,1516702950.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:30.772Z,1516702950.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:31.143Z,1516702951.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:31.178Z,1516702951.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:31.555Z,1516702951.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:31.581Z,1516702951.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:31.955Z,1516702951.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:31.981Z,1516702951.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:32.339Z,1516702952.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:32.353Z,1516702952.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:32.740Z,1516702952.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:32.777Z,1516702952.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:33.151Z,1516702953.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:33.182Z,1516702953.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:33.551Z,1516702953.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:33.566Z,1516702953.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:33.944Z,1516702953.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:33.959Z,1516702953.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:34.340Z,1516702954.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:34.355Z,1516702954.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:34.740Z,1516702954.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:34.760Z,1516702954.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:35.155Z,1516702955.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:35.191Z,1516702955.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:35.551Z,1516702955.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:35.566Z,1516702955.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:35.947Z,1516702955.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:35.968Z,1516702955.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:36.345Z,1516702956.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:36.361Z,1516702956.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:36.741Z,1516702956.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:36.761Z,1516702956.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:37.147Z,1516702957.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:37.162Z,1516702957.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:37.551Z,1516702957.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:37.567Z,1516702957.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:37.948Z,1516702957.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:37.963Z,1516702957.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:38.343Z,1516702958.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:38.357Z,1516702958.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:38.740Z,1516702958.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:38.761Z,1516702958.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:39.145Z,1516702959.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:39.165Z,1516702959.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:39.551Z,1516702959.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:39.566Z,1516702959.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:39.945Z,1516702959.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:39.961Z,1516702959.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:40.340Z,1516702960.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:40.358Z,1516702960.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:40.741Z,1516702960.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:40.756Z,1516702960.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:41.146Z,1516702961.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:41.165Z,1516702961.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:41.551Z,1516702961.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:41.566Z,1516702961.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:41.947Z,1516702961.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:41.968Z,1516702961.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:42.343Z,1516702962.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:42.358Z,1516702962.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:42.740Z,1516702962.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:42.755Z,1516702962.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:43.146Z,1516702963.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:43.168Z,1516702963.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:43.548Z,1516702963.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:43.563Z,1516702963.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:43.946Z,1516702963.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:43.965Z,1516702963.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:44.342Z,1516702964.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:44.356Z,1516702964.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:44.740Z,1516702964.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:44.755Z,1516702964.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:45.146Z,1516702965.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:45.165Z,1516702965.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:45.546Z,1516702965.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:45.560Z,1516702965.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:45.946Z,1516702965.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:45.965Z,1516702965.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:46.340Z,1516702966.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:46.358Z,1516702966.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:46.741Z,1516702966.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:46.760Z,1516702966.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:47.146Z,1516702967.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:47.165Z,1516702967.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:47.551Z,1516702967.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:47.566Z,1516702967.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:47.947Z,1516702967.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:47.968Z,1516702967.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:48.344Z,1516702968.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:48.365Z,1516702968.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:48.744Z,1516702968.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:48.759Z,1516702968.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:49.146Z,1516702969.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:49.168Z,1516702969.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:49.547Z,1516702969.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:49.562Z,1516702969.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:49.946Z,1516702969.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:49.965Z,1516702969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:50.345Z,1516702970.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:50.359Z,1516702970.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:50.744Z,1516702970.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:50.759Z,1516702970.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:51.146Z,1516702971.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:51.161Z,1516702971.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:51.547Z,1516702971.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:51.561Z,1516702971.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:51.948Z,1516702971.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:51.963Z,1516702971.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:52.341Z,1516702972.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:52.356Z,1516702972.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:52.741Z,1516702972.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:52.756Z,1516702972.756 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:52.756Z,1516702972.756 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142 2018-01-23T10:22:52.756Z,1516702972.756 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:22:52.758Z,1516702972.758 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:52.758Z,1516702972.758 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 142 2018-01-23T10:22:52.758Z,1516702972.758 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:22:52.760Z,1516702972.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:52.760Z,1516702972.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142 2018-01-23T10:22:52.760Z,1516702972.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:22:52.772Z,1516702972.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:22:52.772Z,1516702972.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:22:52.772Z,1516702972.772 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:22:53.150Z,1516702973.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:53.176Z,1516702973.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:22:53.176Z,1516702973.176 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142 2018-01-23T10:22:53.177Z,1516702973.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:22:53.177Z,1516702973.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 142 2018-01-23T10:22:53.177Z,1516702973.177 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:22:53.177Z,1516702973.177 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142 2018-01-23T10:22:53.554Z,1516702973.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:53.572Z,1516702973.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:22:53.572Z,1516702973.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:22:53.573Z,1516702973.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:22:53.573Z,1516702973.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:22:53.573Z,1516702973.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:22:53.574Z,1516702973.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:22:53.574Z,1516702973.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:22:53.574Z,1516702973.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:22:53.575Z,1516702973.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:22:53.954Z,1516702973.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:53.984Z,1516702973.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:22:53.985Z,1516702973.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:54.337Z,1516702974.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:54.364Z,1516702974.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:22:54.365Z,1516702974.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:54.733Z,1516702974.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:54.764Z,1516702974.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:22:54.765Z,1516702974.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:55.150Z,1516702975.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:55.168Z,1516702975.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:22:55.169Z,1516702975.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:55.556Z,1516702975.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:55.570Z,1516702975.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:22:55.571Z,1516702975.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:55.948Z,1516702975.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:55.970Z,1516702975.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:22:55.971Z,1516702975.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:56.334Z,1516702976.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:56.362Z,1516702976.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:22:56.363Z,1516702976.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:56.732Z,1516702976.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:56.769Z,1516702976.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:22:56.770Z,1516702976.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:57.160Z,1516702977.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:57.174Z,1516702977.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:22:57.175Z,1516702977.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:57.558Z,1516702977.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:57.576Z,1516702977.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:22:57.577Z,1516702977.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:57.952Z,1516702977.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:57.972Z,1516702977.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:22:57.973Z,1516702977.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:58.334Z,1516702978.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:58.365Z,1516702978.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:22:58.366Z,1516702978.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:58.737Z,1516702978.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:58.765Z,1516702978.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:22:58.766Z,1516702978.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:59.148Z,1516702979.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:59.171Z,1516702979.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:22:59.172Z,1516702979.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:59.552Z,1516702979.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:59.584Z,1516702979.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:22:59.585Z,1516702979.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:22:59.958Z,1516702979.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:22:59.972Z,1516702979.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:22:59.973Z,1516702979.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:00.333Z,1516702980.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:00.369Z,1516702980.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:23:00.370Z,1516702980.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:00.732Z,1516702980.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:00.768Z,1516702980.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:23:00.769Z,1516702980.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:01.143Z,1516702981.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:01.176Z,1516702981.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:23:01.177Z,1516702981.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:01.555Z,1516702981.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:01.576Z,1516702981.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:23:01.577Z,1516702981.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:01.943Z,1516702981.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:01.980Z,1516702981.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:23:01.981Z,1516702981.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:02.337Z,1516702982.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:02.379Z,1516702982.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:23:02.380Z,1516702982.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:02.730Z,1516702982.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:02.745Z,1516702982.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:23:02.746Z,1516702982.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:03.143Z,1516702983.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:03.174Z,1516702983.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:23:03.176Z,1516702983.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:03.555Z,1516702983.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:03.582Z,1516702983.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:23:03.583Z,1516702983.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:06.650Z,1516702986.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:06.665Z,1516702986.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T10:23:06.665Z,1516702986.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:06.773Z,1516702986.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:06.808Z,1516702986.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T10:23:06.809Z,1516702986.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:07.120Z,1516702987.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:07.156Z,1516702987.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:23:07.157Z,1516702987.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:07.517Z,1516702987.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:07.531Z,1516702987.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:23:07.532Z,1516702987.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:07.914Z,1516702987.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:07.928Z,1516702987.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:23:07.929Z,1516702987.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:08.297Z,1516702988.297 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:23:08.297Z,1516702988.297 [NAL9602] Data Fault, FailCount= 4 2018-01-23T10:23:08.297Z,1516702988.297 [NAL9602](ERROR): Data Fault 2018-01-23T10:23:08.314Z,1516702988.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:08.329Z,1516702988.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:23:08.330Z,1516702988.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:08.363Z,1516702988.363 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:23:08.705Z,1516702988.705 [NAL9602](INFO): Powering down 2018-01-23T10:23:08.722Z,1516702988.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:08.736Z,1516702988.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:23:08.737Z,1516702988.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:09.114Z,1516702989.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:09.137Z,1516702989.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:23:09.138Z,1516702989.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:09.514Z,1516702989.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:09.538Z,1516702989.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:23:09.539Z,1516702989.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:09.563Z,1516702989.563 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:23:09.563Z,1516702989.563 [NAL9602] No Fault, FailCount= 4 2018-01-23T10:23:09.916Z,1516702989.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:09.931Z,1516702989.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:23:09.932Z,1516702989.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:10.316Z,1516702990.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:10.331Z,1516702990.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:23:10.332Z,1516702990.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:10.716Z,1516702990.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:10.730Z,1516702990.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:23:10.731Z,1516702990.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:11.116Z,1516702991.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:11.130Z,1516702991.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:23:11.131Z,1516702991.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:11.516Z,1516702991.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:11.531Z,1516702991.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:23:11.532Z,1516702991.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:11.916Z,1516702991.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:11.936Z,1516702991.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:23:11.937Z,1516702991.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:12.314Z,1516702992.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:12.329Z,1516702992.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:23:12.330Z,1516702992.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:12.717Z,1516702992.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:12.732Z,1516702992.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:23:12.732Z,1516702992.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:13.117Z,1516702993.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:13.131Z,1516702993.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:13.520Z,1516702993.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:13.534Z,1516702993.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:13.920Z,1516702993.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:13.935Z,1516702993.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:14.316Z,1516702994.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:14.333Z,1516702994.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:14.716Z,1516702994.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:14.731Z,1516702994.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:15.116Z,1516702995.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:15.131Z,1516702995.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:15.516Z,1516702995.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:15.531Z,1516702995.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:15.916Z,1516702995.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:15.931Z,1516702995.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:16.316Z,1516702996.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:16.331Z,1516702996.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:16.716Z,1516702996.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:16.730Z,1516702996.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:17.113Z,1516702997.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:17.128Z,1516702997.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:17.510Z,1516702997.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:17.544Z,1516702997.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:17.916Z,1516702997.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:17.931Z,1516702997.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:18.316Z,1516702998.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:18.331Z,1516702998.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:18.716Z,1516702998.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:18.732Z,1516702998.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:19.116Z,1516702999.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:19.130Z,1516702999.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:19.516Z,1516702999.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:19.530Z,1516702999.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:19.914Z,1516702999.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:19.938Z,1516702999.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:20.320Z,1516703000.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:20.335Z,1516703000.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:20.716Z,1516703000.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:20.731Z,1516703000.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:21.112Z,1516703001.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:21.134Z,1516703001.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:21.516Z,1516703001.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:21.536Z,1516703001.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:21.919Z,1516703001.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:21.933Z,1516703001.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:22.321Z,1516703002.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:22.336Z,1516703002.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:22.715Z,1516703002.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:22.734Z,1516703002.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:23.105Z,1516703003.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:23.140Z,1516703003.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:23.520Z,1516703003.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:23.541Z,1516703003.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:23.915Z,1516703003.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:23.941Z,1516703003.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:24.305Z,1516703004.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:24.339Z,1516703004.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:24.720Z,1516703004.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:24.735Z,1516703004.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:25.112Z,1516703005.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:25.134Z,1516703005.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:25.508Z,1516703005.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:25.542Z,1516703005.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:25.919Z,1516703005.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:25.934Z,1516703005.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:26.308Z,1516703006.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:26.341Z,1516703006.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:26.705Z,1516703006.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:26.739Z,1516703006.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:27.120Z,1516703007.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:27.138Z,1516703007.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:27.509Z,1516703007.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:27.545Z,1516703007.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:27.911Z,1516703007.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:27.936Z,1516703007.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:28.313Z,1516703008.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:28.338Z,1516703008.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:28.708Z,1516703008.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:28.745Z,1516703008.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:29.105Z,1516703009.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:29.120Z,1516703009.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:29.508Z,1516703009.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:29.549Z,1516703009.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:29.912Z,1516703009.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:29.949Z,1516703009.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:30.316Z,1516703010.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:30.331Z,1516703010.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:30.716Z,1516703010.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:30.753Z,1516703010.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:31.113Z,1516703011.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:31.128Z,1516703011.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:31.517Z,1516703011.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:31.532Z,1516703011.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:31.914Z,1516703011.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:31.941Z,1516703011.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:32.319Z,1516703012.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:32.334Z,1516703012.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:32.718Z,1516703012.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:32.732Z,1516703012.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:33.114Z,1516703013.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:33.143Z,1516703013.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:33.517Z,1516703013.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:33.537Z,1516703013.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:33.917Z,1516703013.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:33.933Z,1516703013.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:34.307Z,1516703014.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:34.341Z,1516703014.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:34.721Z,1516703014.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:34.737Z,1516703014.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:35.109Z,1516703015.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:35.146Z,1516703015.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:35.506Z,1516703015.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:35.538Z,1516703015.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:35.908Z,1516703015.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:35.934Z,1516703015.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:36.308Z,1516703016.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:36.344Z,1516703016.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:36.708Z,1516703016.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:36.735Z,1516703016.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:37.107Z,1516703017.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:37.134Z,1516703017.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:37.508Z,1516703017.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:37.543Z,1516703017.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:37.906Z,1516703017.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:37.930Z,1516703017.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:38.307Z,1516703018.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:38.345Z,1516703018.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:38.712Z,1516703018.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:38.747Z,1516703018.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:39.089Z,1516703019.089 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:23:39.107Z,1516703019.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:39.122Z,1516703019.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:39.508Z,1516703019.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:39.549Z,1516703019.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:39.912Z,1516703019.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:39.927Z,1516703019.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:40.306Z,1516703020.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:40.321Z,1516703020.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:40.720Z,1516703020.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:40.757Z,1516703020.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:41.112Z,1516703021.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:41.132Z,1516703021.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:41.512Z,1516703021.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:41.527Z,1516703021.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:41.920Z,1516703021.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:41.957Z,1516703021.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:42.315Z,1516703022.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:42.330Z,1516703022.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:42.713Z,1516703022.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:42.732Z,1516703022.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:43.114Z,1516703023.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:43.134Z,1516703023.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:43.516Z,1516703023.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:43.530Z,1516703023.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:43.916Z,1516703023.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:43.931Z,1516703023.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:44.314Z,1516703024.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:44.337Z,1516703024.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:44.715Z,1516703024.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:44.730Z,1516703024.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:45.112Z,1516703025.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:45.131Z,1516703025.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:45.516Z,1516703025.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:45.531Z,1516703025.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:45.916Z,1516703025.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:45.930Z,1516703025.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:46.313Z,1516703026.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:46.328Z,1516703026.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:46.721Z,1516703026.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:46.737Z,1516703026.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:47.117Z,1516703027.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:47.132Z,1516703027.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:47.516Z,1516703027.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:47.531Z,1516703027.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:47.916Z,1516703027.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:47.931Z,1516703027.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:48.316Z,1516703028.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:48.331Z,1516703028.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:48.719Z,1516703028.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:48.735Z,1516703028.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:49.116Z,1516703029.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:49.131Z,1516703029.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:49.522Z,1516703029.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:49.544Z,1516703029.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:49.892Z,1516703029.892 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:23:49.916Z,1516703029.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:49.939Z,1516703029.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:50.316Z,1516703030.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:50.337Z,1516703030.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:50.723Z,1516703030.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:50.738Z,1516703030.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:51.122Z,1516703031.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:51.137Z,1516703031.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:51.528Z,1516703031.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:51.543Z,1516703031.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:51.915Z,1516703031.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:51.941Z,1516703031.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:52.318Z,1516703032.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:52.334Z,1516703032.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:52.714Z,1516703032.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:52.743Z,1516703032.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:53.128Z,1516703033.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:53.142Z,1516703033.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:53.526Z,1516703033.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:53.541Z,1516703033.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:53.926Z,1516703033.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:53.941Z,1516703033.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:54.318Z,1516703034.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:54.333Z,1516703034.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:54.712Z,1516703034.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:54.736Z,1516703034.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:55.113Z,1516703035.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:55.136Z,1516703035.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:55.516Z,1516703035.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:55.543Z,1516703035.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:55.926Z,1516703035.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:55.941Z,1516703035.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:56.324Z,1516703036.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:56.345Z,1516703036.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:56.727Z,1516703036.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:56.742Z,1516703036.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:57.114Z,1516703037.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:57.130Z,1516703037.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:57.514Z,1516703037.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:57.537Z,1516703037.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:57.917Z,1516703037.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:57.932Z,1516703037.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:58.313Z,1516703038.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:58.336Z,1516703038.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:58.720Z,1516703038.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:58.735Z,1516703038.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:59.128Z,1516703039.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:59.142Z,1516703039.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:59.530Z,1516703039.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:59.545Z,1516703039.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:23:59.927Z,1516703039.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:23:59.942Z,1516703039.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:00.315Z,1516703040.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:00.340Z,1516703040.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:00.712Z,1516703040.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:00.741Z,1516703040.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:01.121Z,1516703041.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:01.136Z,1516703041.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:01.508Z,1516703041.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:01.543Z,1516703041.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:01.931Z,1516703041.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:01.946Z,1516703041.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:02.331Z,1516703042.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:02.346Z,1516703042.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:02.725Z,1516703042.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:02.750Z,1516703042.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:03.106Z,1516703043.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:03.138Z,1516703043.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:03.509Z,1516703043.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:03.535Z,1516703043.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:03.909Z,1516703043.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:03.948Z,1516703043.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:07.004Z,1516703047.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:07.032Z,1516703047.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:07.134Z,1516703047.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:07.180Z,1516703047.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:07.503Z,1516703047.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:07.534Z,1516703047.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:07.903Z,1516703047.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:07.936Z,1516703047.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:08.295Z,1516703048.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:08.310Z,1516703048.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:08.686Z,1516703048.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:08.701Z,1516703048.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:09.088Z,1516703049.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:09.103Z,1516703049.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:09.486Z,1516703049.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:09.501Z,1516703049.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:09.903Z,1516703049.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:09.934Z,1516703049.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:10.303Z,1516703050.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:10.337Z,1516703050.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:10.692Z,1516703050.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:10.707Z,1516703050.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:11.084Z,1516703051.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:11.104Z,1516703051.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:11.487Z,1516703051.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:11.503Z,1516703051.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:11.879Z,1516703051.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:11.894Z,1516703051.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:12.284Z,1516703052.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:12.311Z,1516703052.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:12.691Z,1516703052.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:12.706Z,1516703052.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:13.093Z,1516703053.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:13.121Z,1516703053.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:13.499Z,1516703053.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:13.513Z,1516703053.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:13.896Z,1516703053.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:13.916Z,1516703053.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:14.274Z,1516703054.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:14.309Z,1516703054.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:14.681Z,1516703054.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:14.703Z,1516703054.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:15.085Z,1516703055.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:15.105Z,1516703055.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:15.480Z,1516703055.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:15.503Z,1516703055.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:15.894Z,1516703055.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:15.910Z,1516703055.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:16.298Z,1516703056.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:16.313Z,1516703056.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:16.695Z,1516703056.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:16.710Z,1516703056.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:17.080Z,1516703057.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:17.102Z,1516703057.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:17.486Z,1516703057.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:17.508Z,1516703057.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:17.880Z,1516703057.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:17.902Z,1516703057.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:18.281Z,1516703058.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:18.303Z,1516703058.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:18.686Z,1516703058.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:18.708Z,1516703058.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:19.094Z,1516703059.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:19.110Z,1516703059.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:19.498Z,1516703059.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:19.517Z,1516703059.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:19.896Z,1516703059.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:19.910Z,1516703059.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:20.274Z,1516703060.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:20.306Z,1516703060.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:20.677Z,1516703060.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:20.703Z,1516703060.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:21.077Z,1516703061.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:21.103Z,1516703061.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:21.476Z,1516703061.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:21.513Z,1516703061.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:21.899Z,1516703061.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:21.914Z,1516703061.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:21.928Z,1516703061.928 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:24:22.299Z,1516703062.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:22.321Z,1516703062.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:22.695Z,1516703062.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:22.710Z,1516703062.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:23.076Z,1516703063.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:23.102Z,1516703063.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:23.476Z,1516703063.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:23.511Z,1516703063.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:23.880Z,1516703063.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:23.906Z,1516703063.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:24.281Z,1516703064.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:24.313Z,1516703064.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:24.676Z,1516703064.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:24.711Z,1516703064.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:25.092Z,1516703065.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:25.122Z,1516703065.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:25.499Z,1516703065.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:25.514Z,1516703065.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:25.897Z,1516703065.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:25.924Z,1516703065.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:26.274Z,1516703066.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:26.309Z,1516703066.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:26.676Z,1516703066.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:26.709Z,1516703066.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:27.081Z,1516703067.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:27.116Z,1516703067.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:27.481Z,1516703067.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:27.507Z,1516703067.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:27.900Z,1516703067.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:27.915Z,1516703067.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:28.300Z,1516703068.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:28.320Z,1516703068.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:28.696Z,1516703068.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:28.711Z,1516703068.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:29.097Z,1516703069.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:29.112Z,1516703069.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:29.477Z,1516703069.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:29.508Z,1516703069.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:29.881Z,1516703069.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:29.907Z,1516703069.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:30.277Z,1516703070.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:30.309Z,1516703070.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:30.684Z,1516703070.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:30.712Z,1516703070.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:31.100Z,1516703071.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:31.115Z,1516703071.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:31.497Z,1516703071.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:31.524Z,1516703071.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:31.890Z,1516703071.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:31.917Z,1516703071.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:32.284Z,1516703072.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:32.310Z,1516703072.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:32.688Z,1516703072.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:32.714Z,1516703072.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:33.077Z,1516703073.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:33.113Z,1516703073.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:33.480Z,1516703073.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:33.513Z,1516703073.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:33.911Z,1516703073.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:33.926Z,1516703073.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:34.303Z,1516703074.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:34.318Z,1516703074.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:34.688Z,1516703074.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:34.725Z,1516703074.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:35.080Z,1516703075.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:35.117Z,1516703075.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:35.479Z,1516703075.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:35.494Z,1516703075.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:35.884Z,1516703075.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:35.921Z,1516703075.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:36.277Z,1516703076.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:36.292Z,1516703076.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:36.684Z,1516703076.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:36.699Z,1516703076.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:37.088Z,1516703077.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:37.125Z,1516703077.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:37.512Z,1516703077.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:37.527Z,1516703077.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:37.898Z,1516703077.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:37.924Z,1516703077.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:38.278Z,1516703078.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:38.293Z,1516703078.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:38.690Z,1516703078.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:38.723Z,1516703078.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:39.089Z,1516703079.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:39.124Z,1516703079.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:39.482Z,1516703079.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:39.497Z,1516703079.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:39.899Z,1516703079.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:39.923Z,1516703079.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:40.303Z,1516703080.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:40.328Z,1516703080.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:40.695Z,1516703080.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:40.731Z,1516703080.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:41.088Z,1516703081.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:41.109Z,1516703081.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:41.485Z,1516703081.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:41.500Z,1516703081.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:41.888Z,1516703081.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:41.909Z,1516703081.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:42.287Z,1516703082.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:42.302Z,1516703082.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:42.689Z,1516703082.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:42.703Z,1516703082.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:43.090Z,1516703083.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:43.109Z,1516703083.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:43.496Z,1516703083.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:43.511Z,1516703083.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:43.893Z,1516703083.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:43.907Z,1516703083.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:44.288Z,1516703084.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:44.303Z,1516703084.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:44.690Z,1516703084.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:44.705Z,1516703084.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:45.090Z,1516703085.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:45.104Z,1516703085.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:45.482Z,1516703085.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:45.509Z,1516703085.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:45.895Z,1516703085.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:45.910Z,1516703085.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:46.295Z,1516703086.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:46.310Z,1516703086.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:46.699Z,1516703086.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:46.714Z,1516703086.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:47.088Z,1516703087.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:47.103Z,1516703087.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:47.482Z,1516703087.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:47.524Z,1516703087.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:47.892Z,1516703087.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:47.921Z,1516703087.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:48.291Z,1516703088.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:48.318Z,1516703088.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:48.691Z,1516703088.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:48.720Z,1516703088.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:49.088Z,1516703089.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:49.111Z,1516703089.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:49.499Z,1516703089.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:49.529Z,1516703089.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:49.894Z,1516703089.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:49.930Z,1516703089.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:50.283Z,1516703090.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:50.298Z,1516703090.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:50.691Z,1516703090.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:50.706Z,1516703090.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:51.086Z,1516703091.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:51.101Z,1516703091.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:51.481Z,1516703091.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:51.502Z,1516703091.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:51.890Z,1516703091.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:51.913Z,1516703091.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:52.293Z,1516703092.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:52.309Z,1516703092.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:52.692Z,1516703092.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:52.708Z,1516703092.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:53.089Z,1516703093.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:53.108Z,1516703093.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:53.487Z,1516703093.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:53.502Z,1516703093.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:53.885Z,1516703093.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:53.908Z,1516703093.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:54.291Z,1516703094.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:54.306Z,1516703094.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:54.685Z,1516703094.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:54.713Z,1516703094.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:55.097Z,1516703095.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:55.105Z,1516703095.105 [PNI_TCM](ERROR): CRC does not match. Expected:0x10241 got:0x49796 2018-01-23T10:24:55.145Z,1516703095.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:55.496Z,1516703095.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:55.513Z,1516703095.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:55.894Z,1516703095.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:55.909Z,1516703095.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:56.280Z,1516703096.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:56.321Z,1516703096.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:56.688Z,1516703096.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:56.697Z,1516703096.697 [PNI_TCM](ERROR): CRC does not match. Expected:0x14662 got:0x17072 2018-01-23T10:24:56.742Z,1516703096.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:57.089Z,1516703097.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:57.104Z,1516703097.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:57.486Z,1516703097.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:57.501Z,1516703097.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:57.890Z,1516703097.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:57.931Z,1516703097.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:58.295Z,1516703098.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:58.303Z,1516703098.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x59368 got:0x51200 2018-01-23T10:24:58.321Z,1516703098.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:58.701Z,1516703098.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:58.716Z,1516703098.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:59.085Z,1516703099.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:59.105Z,1516703099.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:59.485Z,1516703099.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:59.510Z,1516703099.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:24:59.900Z,1516703099.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:24:59.916Z,1516703099.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:00.301Z,1516703100.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:00.316Z,1516703100.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:00.697Z,1516703100.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:00.711Z,1516703100.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:01.084Z,1516703101.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:01.121Z,1516703101.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:01.488Z,1516703101.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:01.506Z,1516703101.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:01.899Z,1516703101.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:01.913Z,1516703101.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:02.296Z,1516703102.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:02.320Z,1516703102.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:02.328Z,1516703102.328 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T10:20:02.1Z 2018-01-23T10:25:02.328Z,1516703102.328 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:25:02.328Z,1516703102.328 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:25:02.696Z,1516703102.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:02.728Z,1516703102.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:03.209Z,1516703103.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:03.224Z,1516703103.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:03.481Z,1516703103.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:03.511Z,1516703103.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:06.602Z,1516703106.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:06.617Z,1516703106.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:06.697Z,1516703106.697 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0168.lzma 2018-01-23T10:25:06.732Z,1516703106.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:06.768Z,1516703106.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:07.086Z,1516703107.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:07.121Z,1516703107.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:07.446Z,1516703107.446 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0168.lzma.bak 2018-01-23T10:25:07.446Z,1516703107.446 [DataOverHttps](INFO): SBD MOMSN=7755421 2018-01-23T10:25:07.511Z,1516703107.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:07.560Z,1516703107.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:08.110Z,1516703108.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:08.129Z,1516703108.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:08.269Z,1516703108.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:08.316Z,1516703108.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:11.380Z,1516703111.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:11.409Z,1516703111.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:11.532Z,1516703111.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:11.557Z,1516703111.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:11.864Z,1516703111.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:11.908Z,1516703111.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:12.263Z,1516703112.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:12.278Z,1516703112.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:12.660Z,1516703112.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:12.675Z,1516703112.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:13.058Z,1516703113.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:13.084Z,1516703113.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:16.155Z,1516703116.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:16.171Z,1516703116.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:16.255Z,1516703116.255 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0169.lzma 2018-01-23T10:25:16.287Z,1516703116.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:16.321Z,1516703116.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:16.645Z,1516703116.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:16.681Z,1516703116.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:17.001Z,1516703117.001 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0169.lzma.bak 2018-01-23T10:25:17.001Z,1516703117.001 [DataOverHttps](INFO): SBD MOMSN=7755423 2018-01-23T10:25:17.035Z,1516703117.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:17.065Z,1516703117.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:17.659Z,1516703117.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:17.674Z,1516703117.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:17.677Z,1516703117.677 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:25:17.677Z,1516703117.677 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:25:17.678Z,1516703117.678 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:25:17.825Z,1516703117.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:17.861Z,1516703117.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:20.915Z,1516703120.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:20.930Z,1516703120.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:21.037Z,1516703121.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:21.081Z,1516703121.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:21.428Z,1516703121.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:21.463Z,1516703121.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:21.823Z,1516703121.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:21.838Z,1516703121.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:22.217Z,1516703122.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:22.232Z,1516703122.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:22.610Z,1516703122.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:22.633Z,1516703122.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:23.013Z,1516703123.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:23.041Z,1516703123.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:23.407Z,1516703123.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:23.439Z,1516703123.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:23.804Z,1516703123.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:23.845Z,1516703123.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:24.231Z,1516703124.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:24.252Z,1516703124.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:24.629Z,1516703124.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:24.649Z,1516703124.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:25.029Z,1516703125.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:25.044Z,1516703125.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:25.404Z,1516703125.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:25.438Z,1516703125.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:25.808Z,1516703125.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:25.842Z,1516703125.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:26.205Z,1516703126.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:26.233Z,1516703126.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:26.604Z,1516703126.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:26.638Z,1516703126.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:27.024Z,1516703127.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:27.039Z,1516703127.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:27.425Z,1516703127.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:27.453Z,1516703127.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:27.829Z,1516703127.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:27.844Z,1516703127.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:28.202Z,1516703128.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:28.217Z,1516703128.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:28.604Z,1516703128.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:28.641Z,1516703128.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:29.005Z,1516703129.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:29.019Z,1516703129.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:29.407Z,1516703129.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:29.422Z,1516703129.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:29.817Z,1516703129.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:29.833Z,1516703129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:30.219Z,1516703130.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:30.234Z,1516703130.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:30.627Z,1516703130.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:30.661Z,1516703130.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:31.015Z,1516703131.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:31.030Z,1516703131.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:31.418Z,1516703131.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:31.433Z,1516703131.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:31.814Z,1516703131.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:31.829Z,1516703131.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:32.212Z,1516703132.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:32.227Z,1516703132.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:32.612Z,1516703132.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:32.633Z,1516703132.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:33.015Z,1516703133.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:33.031Z,1516703133.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:33.419Z,1516703133.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:33.434Z,1516703133.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:33.815Z,1516703133.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:33.833Z,1516703133.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:34.210Z,1516703134.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:34.225Z,1516703134.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:34.612Z,1516703134.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:34.627Z,1516703134.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:35.012Z,1516703135.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:35.033Z,1516703135.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:35.413Z,1516703135.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:35.429Z,1516703135.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:35.810Z,1516703135.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:35.837Z,1516703135.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:36.223Z,1516703136.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:36.238Z,1516703136.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:36.622Z,1516703136.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:36.645Z,1516703136.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:37.022Z,1516703137.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:37.045Z,1516703137.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:37.414Z,1516703137.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:37.433Z,1516703137.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:37.817Z,1516703137.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:37.832Z,1516703137.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:38.220Z,1516703138.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:38.241Z,1516703138.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:38.614Z,1516703138.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:38.629Z,1516703138.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:39.020Z,1516703139.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:39.047Z,1516703139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:39.422Z,1516703139.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:39.445Z,1516703139.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:39.824Z,1516703139.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:39.839Z,1516703139.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:40.208Z,1516703140.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:40.241Z,1516703140.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:40.609Z,1516703140.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:40.636Z,1516703140.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:41.004Z,1516703141.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:41.038Z,1516703141.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:41.406Z,1516703141.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:41.455Z,1516703141.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:41.808Z,1516703141.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:41.825Z,1516703141.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:42.224Z,1516703142.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:42.251Z,1516703142.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:42.628Z,1516703142.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:42.654Z,1516703142.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:43.028Z,1516703143.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:43.061Z,1516703143.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:43.412Z,1516703143.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:43.427Z,1516703143.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:43.812Z,1516703143.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:43.857Z,1516703143.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:44.217Z,1516703144.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:44.248Z,1516703144.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:44.612Z,1516703144.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:44.627Z,1516703144.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:45.023Z,1516703145.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:45.057Z,1516703145.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:45.423Z,1516703145.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:45.455Z,1516703145.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:45.819Z,1516703145.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:45.858Z,1516703145.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:46.208Z,1516703146.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:46.227Z,1516703146.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:46.620Z,1516703146.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:46.657Z,1516703146.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:47.013Z,1516703147.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:47.028Z,1516703147.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:47.413Z,1516703147.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:47.429Z,1516703147.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:47.810Z,1516703147.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:47.834Z,1516703147.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:48.223Z,1516703148.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:48.238Z,1516703148.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:48.623Z,1516703148.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:48.645Z,1516703148.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:49.022Z,1516703149.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:49.050Z,1516703149.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:49.415Z,1516703149.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:49.430Z,1516703149.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:49.816Z,1516703149.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:49.833Z,1516703149.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:50.208Z,1516703150.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:50.240Z,1516703150.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:50.613Z,1516703150.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:50.633Z,1516703150.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:51.024Z,1516703151.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:51.069Z,1516703151.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:51.432Z,1516703151.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:51.456Z,1516703151.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:51.837Z,1516703151.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:51.860Z,1516703151.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:52.206Z,1516703152.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:52.248Z,1516703152.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:52.616Z,1516703152.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:52.651Z,1516703152.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.008Z,1516703153.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:53.046Z,1516703153.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.411Z,1516703153.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:53.467Z,1516703153.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.827Z,1516703153.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:53.864Z,1516703153.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.864Z,1516703153.864 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143 2018-01-23T10:25:53.864Z,1516703153.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:25:53.866Z,1516703153.866 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.866Z,1516703153.866 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 143 2018-01-23T10:25:53.866Z,1516703153.866 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:25:53.880Z,1516703153.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:53.880Z,1516703153.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143 2018-01-23T10:25:53.881Z,1516703153.881 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:25:53.929Z,1516703153.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:25:53.929Z,1516703153.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:25:53.929Z,1516703153.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:25:54.221Z,1516703154.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:54.294Z,1516703154.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:25:54.294Z,1516703154.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143 2018-01-23T10:25:54.319Z,1516703154.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:25:54.319Z,1516703154.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 143 2018-01-23T10:25:54.320Z,1516703154.320 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:25:54.320Z,1516703154.320 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143 2018-01-23T10:25:54.639Z,1516703154.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:54.675Z,1516703154.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:25:54.675Z,1516703154.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:25:54.676Z,1516703154.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:25:54.676Z,1516703154.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:25:54.676Z,1516703154.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:25:54.677Z,1516703154.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:25:54.677Z,1516703154.677 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:25:54.677Z,1516703154.677 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:25:54.678Z,1516703154.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:25:55.020Z,1516703155.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:55.042Z,1516703155.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:25:55.047Z,1516703155.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:55.404Z,1516703155.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:55.430Z,1516703155.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:25:55.431Z,1516703155.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:55.804Z,1516703155.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:55.858Z,1516703155.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:25:55.859Z,1516703155.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:56.220Z,1516703156.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:56.261Z,1516703156.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:25:56.262Z,1516703156.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:56.610Z,1516703156.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:56.665Z,1516703156.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:25:56.666Z,1516703156.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:57.030Z,1516703157.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:57.099Z,1516703157.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:25:57.100Z,1516703157.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:57.433Z,1516703157.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:57.457Z,1516703157.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:25:57.458Z,1516703157.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:57.821Z,1516703157.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:57.868Z,1516703157.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:25:57.869Z,1516703157.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:58.212Z,1516703158.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:58.260Z,1516703158.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:25:58.261Z,1516703158.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:58.631Z,1516703158.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:58.654Z,1516703158.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:25:58.659Z,1516703158.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:59.010Z,1516703159.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:59.085Z,1516703159.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:25:59.086Z,1516703159.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:59.412Z,1516703159.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:59.463Z,1516703159.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:25:59.464Z,1516703159.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:25:59.818Z,1516703159.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:25:59.896Z,1516703159.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:25:59.897Z,1516703159.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:00.216Z,1516703160.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:00.260Z,1516703160.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:26:00.261Z,1516703160.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:00.621Z,1516703160.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:00.657Z,1516703160.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:26:00.658Z,1516703160.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:01.042Z,1516703161.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:01.060Z,1516703161.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:26:01.061Z,1516703161.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:01.410Z,1516703161.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:01.464Z,1516703161.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:26:01.465Z,1516703161.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:01.818Z,1516703161.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:01.837Z,1516703161.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:26:01.838Z,1516703161.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:02.221Z,1516703162.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:02.250Z,1516703162.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:26:02.271Z,1516703162.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:02.611Z,1516703162.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:02.652Z,1516703162.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:26:02.653Z,1516703162.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:03.029Z,1516703163.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:03.053Z,1516703163.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:26:03.054Z,1516703163.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:03.436Z,1516703163.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:03.461Z,1516703163.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:26:03.462Z,1516703163.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:03.822Z,1516703163.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:03.898Z,1516703163.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:26:03.899Z,1516703163.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:04.210Z,1516703164.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:04.245Z,1516703164.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:26:04.246Z,1516703164.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:04.628Z,1516703164.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:04.664Z,1516703164.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:26:04.664Z,1516703164.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:05.015Z,1516703165.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:05.066Z,1516703165.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:26:05.067Z,1516703165.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:05.427Z,1516703165.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:05.468Z,1516703165.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:26:05.469Z,1516703165.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:05.819Z,1516703165.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:05.843Z,1516703165.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:26:05.844Z,1516703165.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:06.225Z,1516703166.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:06.248Z,1516703166.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:26:06.249Z,1516703166.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:06.628Z,1516703166.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:06.680Z,1516703166.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:26:06.681Z,1516703166.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:07.024Z,1516703167.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:07.072Z,1516703167.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:26:07.073Z,1516703167.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:07.406Z,1516703167.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:07.444Z,1516703167.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:26:07.445Z,1516703167.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:07.806Z,1516703167.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:07.842Z,1516703167.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:26:07.847Z,1516703167.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:08.211Z,1516703168.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:08.245Z,1516703168.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:26:08.246Z,1516703168.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:08.610Z,1516703168.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:08.684Z,1516703168.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:26:08.685Z,1516703168.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:09.015Z,1516703169.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:09.046Z,1516703169.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:26:09.051Z,1516703169.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:09.427Z,1516703169.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:09.453Z,1516703169.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:26:09.453Z,1516703169.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:09.826Z,1516703169.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:09.850Z,1516703169.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:26:09.851Z,1516703169.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:10.206Z,1516703170.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:10.220Z,1516703170.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:26:10.221Z,1516703170.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:10.609Z,1516703170.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:10.628Z,1516703170.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:26:10.629Z,1516703170.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:11.009Z,1516703171.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:11.023Z,1516703171.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:26:11.024Z,1516703171.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:11.417Z,1516703171.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:11.432Z,1516703171.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:26:11.433Z,1516703171.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:11.814Z,1516703171.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:11.832Z,1516703171.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:26:11.833Z,1516703171.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:12.215Z,1516703172.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:12.230Z,1516703172.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:26:12.231Z,1516703172.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:12.627Z,1516703172.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:12.642Z,1516703172.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:26:12.663Z,1516703172.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:13.017Z,1516703173.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:13.036Z,1516703173.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:26:13.037Z,1516703173.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:13.413Z,1516703173.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:13.427Z,1516703173.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:26:13.428Z,1516703173.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:13.808Z,1516703173.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:13.830Z,1516703173.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:26:13.831Z,1516703173.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:14.212Z,1516703174.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:14.232Z,1516703174.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:14.610Z,1516703174.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:14.636Z,1516703174.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:15.020Z,1516703175.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:15.047Z,1516703175.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:15.426Z,1516703175.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:15.449Z,1516703175.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:15.827Z,1516703175.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:15.841Z,1516703175.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:16.202Z,1516703176.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:16.230Z,1516703176.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:16.621Z,1516703176.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:16.641Z,1516703176.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:17.005Z,1516703177.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:17.031Z,1516703177.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:17.418Z,1516703177.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:17.433Z,1516703177.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:17.805Z,1516703177.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:17.841Z,1516703177.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:18.226Z,1516703178.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:18.241Z,1516703178.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:21.320Z,1516703181.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:21.336Z,1516703181.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:21.448Z,1516703181.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:21.493Z,1516703181.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:21.788Z,1516703181.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:21.825Z,1516703181.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:22.189Z,1516703182.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:22.204Z,1516703182.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:22.590Z,1516703182.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:22.629Z,1516703182.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:22.995Z,1516703182.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:23.010Z,1516703183.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:23.403Z,1516703183.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:23.418Z,1516703183.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:23.791Z,1516703183.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:23.806Z,1516703183.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:24.186Z,1516703184.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:24.213Z,1516703184.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:24.593Z,1516703184.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:24.608Z,1516703184.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:24.994Z,1516703184.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:25.009Z,1516703185.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:25.395Z,1516703185.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:25.410Z,1516703185.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:25.795Z,1516703185.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:25.809Z,1516703185.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:26.193Z,1516703186.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:26.213Z,1516703186.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:26.589Z,1516703186.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:26.604Z,1516703186.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:26.992Z,1516703186.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:27.019Z,1516703187.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:27.394Z,1516703187.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:27.409Z,1516703187.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:27.794Z,1516703187.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:27.809Z,1516703187.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:28.190Z,1516703188.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:28.205Z,1516703188.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:28.589Z,1516703188.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:28.604Z,1516703188.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:28.994Z,1516703188.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:29.017Z,1516703189.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:29.395Z,1516703189.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:29.410Z,1516703189.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:29.796Z,1516703189.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:29.811Z,1516703189.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:30.188Z,1516703190.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:30.209Z,1516703190.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:30.590Z,1516703190.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:30.604Z,1516703190.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:30.995Z,1516703190.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:31.017Z,1516703191.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:31.396Z,1516703191.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:31.411Z,1516703191.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:31.795Z,1516703191.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:31.816Z,1516703191.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:32.196Z,1516703192.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:32.211Z,1516703192.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:32.587Z,1516703192.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:32.619Z,1516703192.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:33.001Z,1516703193.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:33.020Z,1516703193.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:33.401Z,1516703193.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:33.417Z,1516703193.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:33.800Z,1516703193.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:33.821Z,1516703193.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:34.199Z,1516703194.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:34.214Z,1516703194.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:34.592Z,1516703194.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:34.613Z,1516703194.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:35.004Z,1516703195.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:35.019Z,1516703195.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:35.408Z,1516703195.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:35.422Z,1516703195.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:35.808Z,1516703195.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:35.829Z,1516703195.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:36.191Z,1516703196.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:36.210Z,1516703196.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:36.582Z,1516703196.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:36.618Z,1516703196.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:36.996Z,1516703196.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:37.023Z,1516703197.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:37.405Z,1516703197.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:37.420Z,1516703197.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:37.802Z,1516703197.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:37.817Z,1516703197.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:38.181Z,1516703198.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:38.214Z,1516703198.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:38.584Z,1516703198.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:38.618Z,1516703198.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:39.002Z,1516703199.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:39.034Z,1516703199.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:39.401Z,1516703199.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:39.417Z,1516703199.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:39.795Z,1516703199.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:39.833Z,1516703199.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:40.181Z,1516703200.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:40.219Z,1516703200.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:40.585Z,1516703200.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:40.613Z,1516703200.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:40.983Z,1516703200.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:41.010Z,1516703201.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:41.401Z,1516703201.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:41.417Z,1516703201.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:41.795Z,1516703201.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:41.818Z,1516703201.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:42.199Z,1516703202.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:42.221Z,1516703202.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:42.580Z,1516703202.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:42.617Z,1516703202.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:42.980Z,1516703202.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:43.016Z,1516703203.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:43.381Z,1516703203.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:43.412Z,1516703203.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:43.780Z,1516703203.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:43.826Z,1516703203.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:44.192Z,1516703204.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:44.221Z,1516703204.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:44.615Z,1516703204.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:44.630Z,1516703204.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:45.002Z,1516703205.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:45.026Z,1516703205.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:45.382Z,1516703205.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:45.397Z,1516703205.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:45.785Z,1516703205.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:45.805Z,1516703205.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:46.185Z,1516703206.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:46.204Z,1516703206.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:46.586Z,1516703206.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:46.601Z,1516703206.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:46.992Z,1516703206.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:47.029Z,1516703207.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:47.403Z,1516703207.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:47.435Z,1516703207.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:47.803Z,1516703207.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:47.834Z,1516703207.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:48.195Z,1516703208.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:48.210Z,1516703208.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:48.590Z,1516703208.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:48.605Z,1516703208.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:48.984Z,1516703208.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:49.011Z,1516703209.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:49.388Z,1516703209.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:49.407Z,1516703209.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:49.790Z,1516703209.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:49.804Z,1516703209.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:50.194Z,1516703210.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:50.210Z,1516703210.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:50.595Z,1516703210.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:50.610Z,1516703210.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:50.995Z,1516703210.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:51.010Z,1516703211.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:51.386Z,1516703211.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:51.410Z,1516703211.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:51.793Z,1516703211.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:51.808Z,1516703211.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:52.190Z,1516703212.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:52.212Z,1516703212.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:52.594Z,1516703212.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:52.610Z,1516703212.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:52.997Z,1516703212.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:53.012Z,1516703213.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:53.399Z,1516703213.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:53.414Z,1516703213.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:53.799Z,1516703213.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:53.814Z,1516703213.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:54.199Z,1516703214.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:54.214Z,1516703214.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:54.590Z,1516703214.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:54.605Z,1516703214.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:54.985Z,1516703214.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:55.005Z,1516703215.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:55.387Z,1516703215.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:55.402Z,1516703215.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:55.789Z,1516703215.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:55.803Z,1516703215.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:56.200Z,1516703216.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:56.227Z,1516703216.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:56.600Z,1516703216.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:56.627Z,1516703216.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:57.003Z,1516703217.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:57.017Z,1516703217.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:57.387Z,1516703217.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:57.402Z,1516703217.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:57.788Z,1516703217.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:57.803Z,1516703217.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:58.186Z,1516703218.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:58.215Z,1516703218.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:58.585Z,1516703218.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:58.604Z,1516703218.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:58.984Z,1516703218.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:59.007Z,1516703219.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:59.395Z,1516703219.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:59.410Z,1516703219.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:26:59.799Z,1516703219.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:26:59.814Z,1516703219.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:00.196Z,1516703220.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:00.211Z,1516703220.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:00.590Z,1516703220.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:00.605Z,1516703220.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:00.984Z,1516703220.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:01.011Z,1516703221.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:01.388Z,1516703221.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:01.408Z,1516703221.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:01.784Z,1516703221.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:01.817Z,1516703221.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:02.198Z,1516703222.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:02.214Z,1516703222.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:02.603Z,1516703222.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:02.618Z,1516703222.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:03.003Z,1516703223.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:03.018Z,1516703223.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:03.388Z,1516703223.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:03.407Z,1516703223.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:03.784Z,1516703223.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:03.807Z,1516703223.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:04.184Z,1516703224.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:04.217Z,1516703224.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:04.588Z,1516703224.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:04.608Z,1516703224.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:04.983Z,1516703224.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:05.016Z,1516703225.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:05.400Z,1516703225.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:05.415Z,1516703225.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:05.804Z,1516703225.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:05.819Z,1516703225.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:06.199Z,1516703226.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:06.214Z,1516703226.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:06.589Z,1516703226.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:06.608Z,1516703226.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:06.984Z,1516703226.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:07.016Z,1516703227.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:07.388Z,1516703227.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:07.408Z,1516703227.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:07.784Z,1516703227.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:07.817Z,1516703227.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:08.199Z,1516703228.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:08.214Z,1516703228.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:08.603Z,1516703228.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:08.618Z,1516703228.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:08.000Z,1516703229.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:09.015Z,1516703229.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:09.384Z,1516703229.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:09.409Z,1516703229.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:09.783Z,1516703229.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:09.815Z,1516703229.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:10.190Z,1516703230.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:10.205Z,1516703230.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:10.584Z,1516703230.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:10.617Z,1516703230.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:10.984Z,1516703230.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:11.007Z,1516703231.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:11.401Z,1516703231.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:11.416Z,1516703231.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:11.803Z,1516703231.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:11.818Z,1516703231.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:12.200Z,1516703232.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:12.215Z,1516703232.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:12.588Z,1516703232.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:12.625Z,1516703232.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:12.984Z,1516703232.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:13.011Z,1516703233.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:13.381Z,1516703233.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:13.417Z,1516703233.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:13.785Z,1516703233.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:13.817Z,1516703233.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:14.202Z,1516703234.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:14.225Z,1516703234.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:14.613Z,1516703234.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:14.628Z,1516703234.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:15.006Z,1516703235.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:15.028Z,1516703235.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:15.381Z,1516703235.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:15.408Z,1516703235.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:15.789Z,1516703235.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:15.818Z,1516703235.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:16.193Z,1516703236.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:16.222Z,1516703236.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:16.583Z,1516703236.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:16.610Z,1516703236.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:16.981Z,1516703236.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:16.997Z,1516703236.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:17.393Z,1516703237.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:17.429Z,1516703237.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:17.804Z,1516703237.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:17.829Z,1516703237.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:18.204Z,1516703238.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:18.230Z,1516703238.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:18.594Z,1516703238.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:18.626Z,1516703238.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:21.684Z,1516703241.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:21.703Z,1516703241.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:21.813Z,1516703241.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:21.839Z,1516703241.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:22.187Z,1516703242.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:22.201Z,1516703242.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:22.586Z,1516703242.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:22.601Z,1516703242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:22.986Z,1516703242.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:23.009Z,1516703243.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:23.365Z,1516703243.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:23.391Z,1516703243.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:23.765Z,1516703243.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:23.793Z,1516703243.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:24.177Z,1516703244.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:24.192Z,1516703244.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:24.577Z,1516703244.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:24.592Z,1516703244.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:24.965Z,1516703244.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:25.002Z,1516703245.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:25.387Z,1516703245.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:25.402Z,1516703245.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:25.787Z,1516703245.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:25.801Z,1516703245.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:26.188Z,1516703246.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:26.203Z,1516703246.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:26.565Z,1516703246.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:26.601Z,1516703246.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:26.965Z,1516703246.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:26.991Z,1516703246.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:27.366Z,1516703247.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:27.406Z,1516703247.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:27.765Z,1516703247.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:27.792Z,1516703247.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:28.187Z,1516703248.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:28.202Z,1516703248.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:28.588Z,1516703248.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:28.603Z,1516703248.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:28.987Z,1516703248.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:29.002Z,1516703249.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:29.365Z,1516703249.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:29.400Z,1516703249.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:29.765Z,1516703249.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:29.801Z,1516703249.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:30.185Z,1516703250.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:30.205Z,1516703250.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:30.566Z,1516703250.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:30.592Z,1516703250.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:30.966Z,1516703250.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:31.002Z,1516703251.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:31.384Z,1516703251.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:31.407Z,1516703251.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:31.795Z,1516703251.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:31.810Z,1516703251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:32.189Z,1516703252.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:32.204Z,1516703252.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:32.569Z,1516703252.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:32.597Z,1516703252.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:32.969Z,1516703252.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:32.995Z,1516703252.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:33.374Z,1516703253.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:33.402Z,1516703253.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:33.769Z,1516703253.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:33.806Z,1516703253.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:34.179Z,1516703254.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:34.202Z,1516703254.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:34.589Z,1516703254.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:34.604Z,1516703254.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:34.996Z,1516703254.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:35.010Z,1516703255.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:35.365Z,1516703255.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:35.396Z,1516703255.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:35.765Z,1516703255.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:35.792Z,1516703255.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:36.165Z,1516703256.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:36.180Z,1516703256.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:36.573Z,1516703256.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:36.613Z,1516703256.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:36.977Z,1516703256.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:37.010Z,1516703257.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:37.379Z,1516703257.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:37.406Z,1516703257.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:37.783Z,1516703257.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:37.809Z,1516703257.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:38.183Z,1516703258.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:38.217Z,1516703258.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:38.577Z,1516703258.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:38.609Z,1516703258.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:38.965Z,1516703258.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:38.984Z,1516703258.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:39.366Z,1516703259.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:39.381Z,1516703259.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:39.772Z,1516703259.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:39.809Z,1516703259.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:40.183Z,1516703260.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:40.217Z,1516703260.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:40.587Z,1516703260.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:40.613Z,1516703260.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:40.987Z,1516703260.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:41.011Z,1516703261.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:41.376Z,1516703261.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:41.391Z,1516703261.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:41.777Z,1516703261.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:41.797Z,1516703261.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:42.178Z,1516703262.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:42.193Z,1516703262.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:42.573Z,1516703262.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:42.587Z,1516703262.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:42.973Z,1516703262.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:42.992Z,1516703262.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:43.391Z,1516703263.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:43.406Z,1516703263.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:43.787Z,1516703263.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:43.801Z,1516703263.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:44.187Z,1516703264.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:44.209Z,1516703264.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:44.574Z,1516703264.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:44.601Z,1516703264.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:44.980Z,1516703264.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:44.995Z,1516703264.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:45.383Z,1516703265.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:45.398Z,1516703265.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:45.765Z,1516703265.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:45.797Z,1516703265.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:46.183Z,1516703266.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:46.203Z,1516703266.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:46.585Z,1516703266.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:46.606Z,1516703266.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:46.992Z,1516703266.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:47.006Z,1516703267.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:47.365Z,1516703267.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:47.396Z,1516703267.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:47.768Z,1516703267.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:47.795Z,1516703267.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:48.171Z,1516703268.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:48.205Z,1516703268.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:48.585Z,1516703268.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:48.600Z,1516703268.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:48.973Z,1516703268.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:49.000Z,1516703269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:49.385Z,1516703269.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:49.412Z,1516703269.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:49.778Z,1516703269.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:49.803Z,1516703269.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:50.193Z,1516703270.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:50.208Z,1516703270.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:50.573Z,1516703270.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:50.599Z,1516703270.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:50.971Z,1516703270.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:50.998Z,1516703270.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:51.368Z,1516703271.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:51.396Z,1516703271.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:51.767Z,1516703271.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:51.782Z,1516703271.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:52.182Z,1516703272.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:52.208Z,1516703272.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:52.581Z,1516703272.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:52.609Z,1516703272.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:52.996Z,1516703272.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:53.011Z,1516703273.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:53.368Z,1516703273.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:53.413Z,1516703273.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:53.773Z,1516703273.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:53.804Z,1516703273.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:54.176Z,1516703274.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:54.200Z,1516703274.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:54.574Z,1516703274.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:54.589Z,1516703274.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:54.970Z,1516703274.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:55.004Z,1516703275.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:55.396Z,1516703275.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:55.425Z,1516703275.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:55.790Z,1516703275.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:55.816Z,1516703275.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:56.179Z,1516703276.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:56.194Z,1516703276.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:56.573Z,1516703276.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:56.601Z,1516703276.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:56.978Z,1516703276.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:56.993Z,1516703276.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:57.382Z,1516703277.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:57.397Z,1516703277.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:57.771Z,1516703277.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:57.803Z,1516703277.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:58.184Z,1516703278.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:58.199Z,1516703278.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:58.588Z,1516703278.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:58.603Z,1516703278.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:58.988Z,1516703278.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:59.009Z,1516703279.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:59.377Z,1516703279.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:59.397Z,1516703279.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:27:59.777Z,1516703279.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:27:59.792Z,1516703279.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:00.177Z,1516703280.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:00.197Z,1516703280.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:00.574Z,1516703280.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:00.601Z,1516703280.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:00.965Z,1516703280.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:00.982Z,1516703280.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x46332 got:0x16956 2018-01-23T10:28:01.001Z,1516703281.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:01.388Z,1516703281.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:01.407Z,1516703281.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:01.787Z,1516703281.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:01.802Z,1516703281.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:02.186Z,1516703282.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:02.203Z,1516703282.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:02.565Z,1516703282.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:02.598Z,1516703282.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:02.967Z,1516703282.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:02.994Z,1516703282.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:03.368Z,1516703283.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:03.397Z,1516703283.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:03.765Z,1516703283.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:03.799Z,1516703283.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:04.190Z,1516703284.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:04.213Z,1516703284.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:04.591Z,1516703284.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:04.606Z,1516703284.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:04.988Z,1516703284.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:05.003Z,1516703285.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:05.365Z,1516703285.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:05.400Z,1516703285.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:05.765Z,1516703285.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:05.797Z,1516703285.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:06.190Z,1516703286.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:06.205Z,1516703286.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:06.588Z,1516703286.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:06.608Z,1516703286.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:06.991Z,1516703286.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:07.008Z,1516703287.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:07.366Z,1516703287.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:07.407Z,1516703287.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:07.765Z,1516703287.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:07.800Z,1516703287.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:08.177Z,1516703288.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:08.205Z,1516703288.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:08.579Z,1516703288.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:08.621Z,1516703288.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:08.975Z,1516703288.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:08.998Z,1516703288.998 [PNI_TCM](ERROR): CRC does not match. Expected:0x63813 got:0x60189 2018-01-23T10:28:09.017Z,1516703289.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:09.366Z,1516703289.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:09.412Z,1516703289.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:09.768Z,1516703289.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:09.777Z,1516703289.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x50932 got:0x49796 2018-01-23T10:28:09.816Z,1516703289.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:10.175Z,1516703290.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:10.205Z,1516703290.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:10.576Z,1516703290.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:10.608Z,1516703290.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:10.985Z,1516703290.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:11.009Z,1516703291.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:11.380Z,1516703291.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:11.404Z,1516703291.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:11.766Z,1516703291.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:11.815Z,1516703291.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:12.199Z,1516703292.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:12.214Z,1516703292.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:12.586Z,1516703292.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:12.622Z,1516703292.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:12.982Z,1516703292.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:13.010Z,1516703293.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:13.373Z,1516703293.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:13.417Z,1516703293.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:13.776Z,1516703293.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:13.819Z,1516703293.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:14.180Z,1516703294.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:14.213Z,1516703294.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:14.600Z,1516703294.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:14.616Z,1516703294.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:14.987Z,1516703294.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:15.029Z,1516703295.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:15.367Z,1516703295.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:15.421Z,1516703295.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:15.776Z,1516703295.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:15.815Z,1516703295.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:16.184Z,1516703296.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:16.212Z,1516703296.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:16.583Z,1516703296.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:16.620Z,1516703296.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:16.983Z,1516703296.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:17.016Z,1516703297.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:17.371Z,1516703297.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:17.388Z,1516703297.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:17.770Z,1516703297.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:17.797Z,1516703297.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:18.179Z,1516703298.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:18.195Z,1516703298.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:18.579Z,1516703298.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:18.594Z,1516703298.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:18.980Z,1516703298.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:18.999Z,1516703298.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:22.075Z,1516703302.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:22.090Z,1516703302.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:22.189Z,1516703302.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:22.236Z,1516703302.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:22.556Z,1516703302.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:22.601Z,1516703302.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:22.956Z,1516703302.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:22.982Z,1516703302.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:23.356Z,1516703303.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:23.389Z,1516703303.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:23.744Z,1516703303.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:23.785Z,1516703303.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:24.142Z,1516703304.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:24.158Z,1516703304.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:24.540Z,1516703304.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:24.556Z,1516703304.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:24.938Z,1516703304.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:24.965Z,1516703304.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:25.352Z,1516703305.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:25.373Z,1516703305.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:25.754Z,1516703305.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:25.769Z,1516703305.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:26.152Z,1516703306.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:26.172Z,1516703306.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:26.537Z,1516703306.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:26.568Z,1516703306.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:26.950Z,1516703306.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:26.965Z,1516703306.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:27.332Z,1516703307.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:27.371Z,1516703307.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:27.753Z,1516703307.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:27.773Z,1516703307.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:28.134Z,1516703308.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:28.174Z,1516703308.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:28.551Z,1516703308.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:28.574Z,1516703308.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:28.962Z,1516703308.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:28.985Z,1516703308.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:29.348Z,1516703309.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:29.380Z,1516703309.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:29.733Z,1516703309.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:29.765Z,1516703309.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:30.132Z,1516703310.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:30.150Z,1516703310.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:30.533Z,1516703310.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:30.550Z,1516703310.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:30.945Z,1516703310.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:30.982Z,1516703310.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:31.352Z,1516703311.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:31.387Z,1516703311.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:31.756Z,1516703311.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:31.787Z,1516703311.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:32.143Z,1516703312.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:32.161Z,1516703312.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:32.541Z,1516703312.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:32.556Z,1516703312.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:32.940Z,1516703312.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:32.961Z,1516703312.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:33.338Z,1516703313.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:33.362Z,1516703313.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:33.741Z,1516703313.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:33.756Z,1516703313.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:34.140Z,1516703314.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:34.155Z,1516703314.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:34.543Z,1516703314.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:34.559Z,1516703314.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:34.947Z,1516703314.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:34.962Z,1516703314.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:35.346Z,1516703315.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:35.361Z,1516703315.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:35.738Z,1516703315.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:35.762Z,1516703315.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:36.141Z,1516703316.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:36.164Z,1516703316.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:36.544Z,1516703316.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:36.560Z,1516703316.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:36.945Z,1516703316.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:36.961Z,1516703316.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:37.347Z,1516703317.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:37.368Z,1516703317.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:37.748Z,1516703317.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:37.763Z,1516703317.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:38.145Z,1516703318.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:38.165Z,1516703318.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:38.541Z,1516703318.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:38.556Z,1516703318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:38.936Z,1516703318.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:38.967Z,1516703318.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:39.332Z,1516703319.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:39.370Z,1516703319.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:39.733Z,1516703319.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:39.760Z,1516703319.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:40.132Z,1516703320.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:40.165Z,1516703320.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:40.548Z,1516703320.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:40.576Z,1516703320.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:40.961Z,1516703320.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:40.975Z,1516703320.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:41.356Z,1516703321.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:41.371Z,1516703321.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:41.732Z,1516703321.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:41.765Z,1516703321.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:42.131Z,1516703322.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:42.167Z,1516703322.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:42.533Z,1516703322.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:42.561Z,1516703322.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:42.932Z,1516703322.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:42.969Z,1516703322.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:43.358Z,1516703323.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:43.372Z,1516703323.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:43.757Z,1516703323.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:43.778Z,1516703323.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:44.143Z,1516703324.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:44.181Z,1516703324.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:44.536Z,1516703324.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:44.577Z,1516703324.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:44.938Z,1516703324.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:44.974Z,1516703324.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:45.340Z,1516703325.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:45.375Z,1516703325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:45.737Z,1516703325.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:45.770Z,1516703325.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:46.141Z,1516703326.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:46.161Z,1516703326.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:46.556Z,1516703326.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:46.586Z,1516703326.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:46.947Z,1516703326.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:46.962Z,1516703326.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:47.344Z,1516703327.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:47.360Z,1516703327.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:47.742Z,1516703327.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:47.758Z,1516703327.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:48.141Z,1516703328.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:48.157Z,1516703328.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:48.538Z,1516703328.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:48.562Z,1516703328.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:48.944Z,1516703328.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:48.960Z,1516703328.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:49.346Z,1516703329.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:49.363Z,1516703329.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:49.748Z,1516703329.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:49.763Z,1516703329.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:50.146Z,1516703330.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:50.162Z,1516703330.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:50.541Z,1516703330.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:50.556Z,1516703330.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:50.940Z,1516703330.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:50.956Z,1516703330.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:51.340Z,1516703331.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:51.361Z,1516703331.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:51.742Z,1516703331.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:51.757Z,1516703331.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:52.140Z,1516703332.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:52.156Z,1516703332.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:52.546Z,1516703332.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:52.561Z,1516703332.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:52.947Z,1516703332.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:52.962Z,1516703332.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:53.346Z,1516703333.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:53.361Z,1516703333.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:53.740Z,1516703333.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:53.755Z,1516703333.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.141Z,1516703334.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:54.156Z,1516703334.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.537Z,1516703334.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:54.560Z,1516703334.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.940Z,1516703334.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:54.955Z,1516703334.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.955Z,1516703334.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144 2018-01-23T10:28:54.955Z,1516703334.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:28:54.957Z,1516703334.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.957Z,1516703334.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 144 2018-01-23T10:28:54.957Z,1516703334.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:28:54.959Z,1516703334.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:54.959Z,1516703334.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144 2018-01-23T10:28:54.959Z,1516703334.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:28:54.971Z,1516703334.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:28:54.972Z,1516703334.972 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:28:54.972Z,1516703334.972 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:28:55.352Z,1516703335.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:55.377Z,1516703335.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:28:55.377Z,1516703335.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144 2018-01-23T10:28:55.377Z,1516703335.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:28:55.378Z,1516703335.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 144 2018-01-23T10:28:55.378Z,1516703335.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:28:55.378Z,1516703335.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144 2018-01-23T10:28:55.755Z,1516703335.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:55.769Z,1516703335.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:28:55.769Z,1516703335.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:28:55.770Z,1516703335.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:28:55.770Z,1516703335.770 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:28:55.771Z,1516703335.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:28:55.771Z,1516703335.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:28:55.771Z,1516703335.771 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:28:55.772Z,1516703335.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:28:55.772Z,1516703335.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:28:56.155Z,1516703336.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:56.170Z,1516703336.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:28:56.171Z,1516703336.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:56.549Z,1516703336.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:56.563Z,1516703336.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:28:56.564Z,1516703336.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:56.945Z,1516703336.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:56.964Z,1516703336.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:28:56.965Z,1516703336.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:57.333Z,1516703337.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:57.361Z,1516703337.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:28:57.361Z,1516703337.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:57.737Z,1516703337.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:57.764Z,1516703337.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:28:57.765Z,1516703337.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:58.136Z,1516703338.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:58.163Z,1516703338.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:28:58.164Z,1516703338.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:58.552Z,1516703338.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:58.572Z,1516703338.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:28:58.573Z,1516703338.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:58.956Z,1516703338.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:58.971Z,1516703338.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:28:58.972Z,1516703338.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:59.353Z,1516703339.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:59.367Z,1516703339.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:28:59.368Z,1516703339.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:28:59.732Z,1516703339.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:28:59.769Z,1516703339.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:28:59.770Z,1516703339.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:00.131Z,1516703340.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:00.169Z,1516703340.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:29:00.170Z,1516703340.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:00.533Z,1516703340.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:00.564Z,1516703340.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:29:00.565Z,1516703340.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:00.932Z,1516703340.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:00.969Z,1516703340.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:29:00.970Z,1516703340.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:01.358Z,1516703341.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:01.372Z,1516703341.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:29:01.373Z,1516703341.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:01.758Z,1516703341.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:01.780Z,1516703341.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:29:01.781Z,1516703341.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:02.148Z,1516703342.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:02.162Z,1516703342.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:29:02.163Z,1516703342.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:02.536Z,1516703342.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:02.553Z,1516703342.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:29:02.553Z,1516703342.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:02.938Z,1516703342.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:02.953Z,1516703342.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:29:02.954Z,1516703342.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:03.338Z,1516703343.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:03.364Z,1516703343.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:29:03.365Z,1516703343.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:03.743Z,1516703343.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:03.758Z,1516703343.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:29:03.759Z,1516703343.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:04.136Z,1516703344.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:04.160Z,1516703344.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:29:04.161Z,1516703344.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:04.555Z,1516703344.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:04.569Z,1516703344.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:29:04.571Z,1516703344.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:04.956Z,1516703344.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:04.970Z,1516703344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:29:04.971Z,1516703344.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:05.351Z,1516703345.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:05.371Z,1516703345.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:29:05.372Z,1516703345.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:05.741Z,1516703345.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:05.768Z,1516703345.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:29:05.769Z,1516703345.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:06.148Z,1516703346.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:06.162Z,1516703346.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:29:06.163Z,1516703346.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:06.547Z,1516703346.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:06.562Z,1516703346.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:29:06.563Z,1516703346.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:06.932Z,1516703346.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:06.970Z,1516703346.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:29:06.971Z,1516703346.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:07.360Z,1516703347.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:07.375Z,1516703347.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:29:07.375Z,1516703347.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:07.756Z,1516703347.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:07.776Z,1516703347.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:29:07.777Z,1516703347.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:08.159Z,1516703348.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:08.174Z,1516703348.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:29:08.175Z,1516703348.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:08.533Z,1516703348.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:08.562Z,1516703348.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:29:08.563Z,1516703348.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:08.931Z,1516703348.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:08.958Z,1516703348.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:29:08.963Z,1516703348.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:09.333Z,1516703349.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:09.361Z,1516703349.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:29:09.362Z,1516703349.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:09.733Z,1516703349.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:09.769Z,1516703349.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:29:09.770Z,1516703349.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:10.130Z,1516703350.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:10.158Z,1516703350.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:29:10.163Z,1516703350.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:10.554Z,1516703350.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:10.569Z,1516703350.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:29:10.570Z,1516703350.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:10.958Z,1516703350.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:10.972Z,1516703350.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:29:10.973Z,1516703350.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:11.348Z,1516703351.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:11.385Z,1516703351.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:29:11.386Z,1516703351.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:11.732Z,1516703351.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:11.768Z,1516703351.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:29:11.769Z,1516703351.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:12.135Z,1516703352.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:12.173Z,1516703352.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:29:12.174Z,1516703352.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:12.537Z,1516703352.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:12.568Z,1516703352.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:29:12.569Z,1516703352.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:12.936Z,1516703352.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:12.970Z,1516703352.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:29:12.975Z,1516703352.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:13.352Z,1516703353.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:13.377Z,1516703353.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:29:13.378Z,1516703353.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:13.762Z,1516703353.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:13.778Z,1516703353.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:29:13.779Z,1516703353.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:14.162Z,1516703354.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:14.177Z,1516703354.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:29:14.178Z,1516703354.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:14.537Z,1516703354.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:14.553Z,1516703354.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:29:14.553Z,1516703354.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:14.934Z,1516703354.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:14.949Z,1516703354.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:29:14.950Z,1516703354.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:15.344Z,1516703355.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:15.381Z,1516703355.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:15.742Z,1516703355.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:15.757Z,1516703355.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:16.136Z,1516703356.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:16.156Z,1516703356.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:16.556Z,1516703356.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:16.591Z,1516703356.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:16.947Z,1516703356.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:16.962Z,1516703356.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:17.346Z,1516703357.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:17.361Z,1516703357.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:17.740Z,1516703357.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:17.761Z,1516703357.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:18.141Z,1516703358.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:18.156Z,1516703358.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:18.537Z,1516703358.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:18.565Z,1516703358.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:18.944Z,1516703358.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:18.965Z,1516703358.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:19.352Z,1516703359.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:19.367Z,1516703359.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:22.448Z,1516703362.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:22.463Z,1516703362.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:22.590Z,1516703362.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:22.625Z,1516703362.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:22.913Z,1516703362.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:22.949Z,1516703362.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:23.313Z,1516703363.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:23.328Z,1516703363.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:23.714Z,1516703363.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:23.729Z,1516703363.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:24.113Z,1516703364.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:24.129Z,1516703364.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:24.524Z,1516703364.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:24.538Z,1516703364.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:24.924Z,1516703364.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:24.955Z,1516703364.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:25.328Z,1516703365.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:25.359Z,1516703365.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:25.713Z,1516703365.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:25.728Z,1516703365.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:26.109Z,1516703366.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:26.132Z,1516703366.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:26.512Z,1516703366.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:26.539Z,1516703366.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:26.917Z,1516703366.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:26.932Z,1516703366.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:27.323Z,1516703367.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:27.338Z,1516703367.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:27.727Z,1516703367.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:27.742Z,1516703367.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:28.124Z,1516703368.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:28.144Z,1516703368.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:28.513Z,1516703368.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:28.533Z,1516703368.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:28.907Z,1516703368.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:28.930Z,1516703368.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:29.313Z,1516703369.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:29.328Z,1516703369.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:29.713Z,1516703369.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:29.733Z,1516703369.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:30.107Z,1516703370.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:30.130Z,1516703370.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:30.524Z,1516703370.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:30.538Z,1516703370.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:30.926Z,1516703370.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:30.941Z,1516703370.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:31.323Z,1516703371.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:31.338Z,1516703371.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:31.713Z,1516703371.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:31.732Z,1516703371.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:32.117Z,1516703372.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:32.132Z,1516703372.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:32.509Z,1516703372.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:32.532Z,1516703372.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:32.914Z,1516703372.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:32.936Z,1516703372.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:33.326Z,1516703373.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:33.341Z,1516703373.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:33.726Z,1516703373.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:33.741Z,1516703373.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:34.123Z,1516703374.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:34.138Z,1516703374.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:34.513Z,1516703374.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:34.533Z,1516703374.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:34.908Z,1516703374.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:34.933Z,1516703374.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:35.328Z,1516703375.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:35.342Z,1516703375.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:35.727Z,1516703375.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:35.742Z,1516703375.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:36.120Z,1516703376.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:36.147Z,1516703376.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:36.505Z,1516703376.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:36.537Z,1516703376.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:36.908Z,1516703376.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:36.934Z,1516703376.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:37.333Z,1516703377.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:37.396Z,1516703377.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:37.728Z,1516703377.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:37.742Z,1516703377.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:38.123Z,1516703378.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:38.138Z,1516703378.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:38.504Z,1516703378.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:38.536Z,1516703378.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:38.905Z,1516703378.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:38.937Z,1516703378.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:39.327Z,1516703379.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:39.342Z,1516703379.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:39.725Z,1516703379.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:39.752Z,1516703379.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:40.129Z,1516703380.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:40.143Z,1516703380.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:40.510Z,1516703380.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:40.540Z,1516703380.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:40.905Z,1516703380.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:40.941Z,1516703380.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:41.318Z,1516703381.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:41.355Z,1516703381.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:41.756Z,1516703381.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:41.787Z,1516703381.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:42.119Z,1516703382.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:42.146Z,1516703382.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:42.506Z,1516703382.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:42.546Z,1516703382.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:42.902Z,1516703382.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:42.918Z,1516703382.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:43.316Z,1516703383.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:43.348Z,1516703383.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:43.724Z,1516703383.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:43.748Z,1516703383.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:44.116Z,1516703384.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:44.139Z,1516703384.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:44.514Z,1516703384.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:44.529Z,1516703384.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:44.910Z,1516703384.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:44.940Z,1516703384.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:45.316Z,1516703385.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:45.345Z,1516703385.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:45.723Z,1516703385.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:45.739Z,1516703385.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:46.123Z,1516703386.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:46.139Z,1516703386.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:46.518Z,1516703386.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:46.533Z,1516703386.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:46.909Z,1516703386.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:46.936Z,1516703386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:47.328Z,1516703387.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:47.343Z,1516703387.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:47.726Z,1516703387.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:47.741Z,1516703387.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:48.123Z,1516703388.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:48.153Z,1516703388.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:48.509Z,1516703388.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:48.537Z,1516703388.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:48.902Z,1516703388.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:48.938Z,1516703388.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:49.320Z,1516703389.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:49.352Z,1516703389.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:49.725Z,1516703389.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:49.753Z,1516703389.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:50.123Z,1516703390.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:50.138Z,1516703390.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:50.505Z,1516703390.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:50.537Z,1516703390.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:50.904Z,1516703390.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:50.939Z,1516703390.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:51.320Z,1516703391.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:51.341Z,1516703391.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:51.724Z,1516703391.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:51.745Z,1516703391.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:52.118Z,1516703392.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:52.150Z,1516703392.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:52.506Z,1516703392.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:52.537Z,1516703392.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:52.909Z,1516703392.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:52.935Z,1516703392.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:53.314Z,1516703393.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:53.340Z,1516703393.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:53.735Z,1516703393.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:53.750Z,1516703393.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:54.124Z,1516703394.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:54.155Z,1516703394.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:54.505Z,1516703394.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:54.537Z,1516703394.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:54.902Z,1516703394.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:54.926Z,1516703394.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:55.315Z,1516703395.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:55.351Z,1516703395.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:55.727Z,1516703395.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:55.751Z,1516703395.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:56.115Z,1516703396.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:56.149Z,1516703396.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:56.505Z,1516703396.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:56.540Z,1516703396.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:56.905Z,1516703396.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:56.941Z,1516703396.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:57.315Z,1516703397.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:57.354Z,1516703397.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:57.731Z,1516703397.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:57.746Z,1516703397.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:58.115Z,1516703398.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:58.150Z,1516703398.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:58.506Z,1516703398.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:58.540Z,1516703398.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:58.905Z,1516703398.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:58.941Z,1516703398.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:59.333Z,1516703399.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:59.348Z,1516703399.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:29:59.719Z,1516703399.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:29:59.745Z,1516703399.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:00.115Z,1516703400.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:00.142Z,1516703400.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:00.513Z,1516703400.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:00.528Z,1516703400.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:00.908Z,1516703400.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:00.923Z,1516703400.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:01.327Z,1516703401.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:01.353Z,1516703401.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:01.727Z,1516703401.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:01.752Z,1516703401.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:02.120Z,1516703402.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:02.155Z,1516703402.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:02.514Z,1516703402.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:02.529Z,1516703402.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:02.913Z,1516703402.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:02.927Z,1516703402.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:03.316Z,1516703403.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:03.332Z,1516703403.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:03.724Z,1516703403.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:03.748Z,1516703403.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:04.115Z,1516703404.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:04.131Z,1516703404.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:04.512Z,1516703404.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:04.528Z,1516703404.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:04.908Z,1516703404.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:04.931Z,1516703404.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:05.322Z,1516703405.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:05.338Z,1516703405.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:05.722Z,1516703405.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:05.738Z,1516703405.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:06.122Z,1516703406.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:06.137Z,1516703406.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:06.514Z,1516703406.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:06.536Z,1516703406.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:06.910Z,1516703406.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:06.925Z,1516703406.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:07.320Z,1516703407.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:07.348Z,1516703407.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:07.726Z,1516703407.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:07.741Z,1516703407.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:08.118Z,1516703408.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:08.150Z,1516703408.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:08.512Z,1516703408.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:08.532Z,1516703408.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:08.914Z,1516703408.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:08.936Z,1516703408.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:09.320Z,1516703409.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:09.348Z,1516703409.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:09.727Z,1516703409.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:09.742Z,1516703409.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:10.123Z,1516703410.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:10.138Z,1516703410.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:10.505Z,1516703410.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:10.537Z,1516703410.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:10.912Z,1516703410.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:10.937Z,1516703410.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:11.304Z,1516703411.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:11.339Z,1516703411.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:11.727Z,1516703411.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:11.742Z,1516703411.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:12.126Z,1516703412.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:12.141Z,1516703412.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:12.523Z,1516703412.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:12.538Z,1516703412.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:12.902Z,1516703412.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:12.937Z,1516703412.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:13.305Z,1516703413.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:13.337Z,1516703413.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:13.705Z,1516703413.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:13.740Z,1516703413.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:14.102Z,1516703414.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:14.137Z,1516703414.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:14.520Z,1516703414.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:14.548Z,1516703414.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:14.932Z,1516703414.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:14.946Z,1516703414.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:15.323Z,1516703415.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:15.338Z,1516703415.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:15.704Z,1516703415.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:15.730Z,1516703415.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:16.104Z,1516703416.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:16.139Z,1516703416.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:16.505Z,1516703416.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:16.546Z,1516703416.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:16.909Z,1516703416.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:16.936Z,1516703416.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:17.304Z,1516703417.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:17.345Z,1516703417.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:17.727Z,1516703417.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:17.742Z,1516703417.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:18.126Z,1516703418.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:18.150Z,1516703418.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:18.153Z,1516703418.153 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T10:30:18.153Z,1516703418.153 [Default:CheckIn:C.Wait] Stopped 2018-01-23T10:30:18.153Z,1516703418.153 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T10:30:18.153Z,1516703418.153 [Default:CheckIn:D] Running Loop=1 2018-01-23T10:30:18.524Z,1516703418.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:18.544Z,1516703418.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:18.548Z,1516703418.548 [Default:CheckIn:D] Stopped 2018-01-23T10:30:18.548Z,1516703418.548 [Default:CheckIn:E] Running Loop=1 2018-01-23T10:30:18.902Z,1516703418.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:18.926Z,1516703418.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:18.929Z,1516703418.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 432.441471 min 2018-01-23T10:30:18.929Z,1516703418.929 [Default:CheckIn:E] Stopped 2018-01-23T10:30:18.929Z,1516703418.929 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn] Stopped 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn](INFO): Running loop #43 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn] Running Loop=43 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T10:30:18.930Z,1516703418.930 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T10:30:19.305Z,1516703419.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:19.345Z,1516703419.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:19.710Z,1516703419.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:19.724Z,1516703419.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:22.817Z,1516703422.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:22.846Z,1516703422.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:22.956Z,1516703422.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:22.993Z,1516703422.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:23.304Z,1516703423.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:23.321Z,1516703423.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:23.715Z,1516703423.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:23.756Z,1516703423.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:24.094Z,1516703424.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:24.111Z,1516703424.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:24.492Z,1516703424.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:24.525Z,1516703424.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:24.902Z,1516703424.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:24.917Z,1516703424.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:25.290Z,1516703425.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:25.318Z,1516703425.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:25.710Z,1516703425.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:25.726Z,1516703425.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:26.110Z,1516703426.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:26.126Z,1516703426.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:26.510Z,1516703426.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:26.526Z,1516703426.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:26.892Z,1516703426.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:26.913Z,1516703426.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:27.298Z,1516703427.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:27.313Z,1516703427.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:27.693Z,1516703427.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:27.716Z,1516703427.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:28.092Z,1516703428.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:28.115Z,1516703428.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:28.508Z,1516703428.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:28.523Z,1516703428.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:28.907Z,1516703428.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:28.922Z,1516703428.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:29.310Z,1516703429.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:29.326Z,1516703429.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:29.688Z,1516703429.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:29.723Z,1516703429.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:30.088Z,1516703430.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:30.121Z,1516703430.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:30.488Z,1516703430.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:30.521Z,1516703430.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:30.889Z,1516703430.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:30.921Z,1516703430.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:31.286Z,1516703431.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:31.321Z,1516703431.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:31.704Z,1516703431.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:31.731Z,1516703431.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:32.116Z,1516703432.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:32.136Z,1516703432.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:32.512Z,1516703432.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:32.527Z,1516703432.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:32.889Z,1516703432.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:32.921Z,1516703432.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:33.288Z,1516703433.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:33.321Z,1516703433.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:33.689Z,1516703433.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:33.717Z,1516703433.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:34.088Z,1516703434.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:34.121Z,1516703434.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:34.507Z,1516703434.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:34.526Z,1516703434.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:34.903Z,1516703434.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:34.926Z,1516703434.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:35.303Z,1516703435.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:35.338Z,1516703435.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:35.688Z,1516703435.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:35.722Z,1516703435.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:36.086Z,1516703436.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:36.110Z,1516703436.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:36.488Z,1516703436.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:36.525Z,1516703436.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:36.889Z,1516703436.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:36.925Z,1516703436.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:37.286Z,1516703437.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:37.301Z,1516703437.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:37.699Z,1516703437.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:37.726Z,1516703437.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:38.103Z,1516703438.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:38.137Z,1516703438.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:38.516Z,1516703438.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:38.531Z,1516703438.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:38.897Z,1516703438.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:38.929Z,1516703438.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:39.289Z,1516703439.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:39.333Z,1516703439.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:39.694Z,1516703439.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:39.729Z,1516703439.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:40.088Z,1516703440.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:40.125Z,1516703440.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:40.500Z,1516703440.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:40.535Z,1516703440.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:40.900Z,1516703440.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:40.935Z,1516703440.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:41.308Z,1516703441.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:41.334Z,1516703441.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:41.692Z,1516703441.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:41.707Z,1516703441.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:42.089Z,1516703442.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:42.104Z,1516703442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:42.496Z,1516703442.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:42.517Z,1516703442.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:42.897Z,1516703442.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:42.911Z,1516703442.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:43.290Z,1516703443.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:43.319Z,1516703443.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:43.703Z,1516703443.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:43.719Z,1516703443.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:44.103Z,1516703444.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:44.118Z,1516703444.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:44.499Z,1516703444.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:44.515Z,1516703444.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:44.895Z,1516703444.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:44.910Z,1516703444.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:45.296Z,1516703445.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:45.310Z,1516703445.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:45.696Z,1516703445.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:45.711Z,1516703445.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:46.094Z,1516703446.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:46.117Z,1516703446.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:46.499Z,1516703446.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:46.514Z,1516703446.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:46.903Z,1516703446.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:46.918Z,1516703446.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:47.300Z,1516703447.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:47.314Z,1516703447.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:47.696Z,1516703447.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:47.716Z,1516703447.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:48.092Z,1516703448.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:48.119Z,1516703448.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:48.501Z,1516703448.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:48.525Z,1516703448.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:48.899Z,1516703448.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:48.946Z,1516703448.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:49.298Z,1516703449.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:49.318Z,1516703449.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:49.708Z,1516703449.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:49.729Z,1516703449.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:50.113Z,1516703450.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:50.159Z,1516703450.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:50.510Z,1516703450.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:50.537Z,1516703450.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:50.894Z,1516703450.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:50.925Z,1516703450.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:51.294Z,1516703451.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:51.333Z,1516703451.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:51.693Z,1516703451.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:51.724Z,1516703451.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:52.094Z,1516703452.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:52.129Z,1516703452.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:52.514Z,1516703452.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:52.541Z,1516703452.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:52.905Z,1516703452.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:52.958Z,1516703452.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:53.309Z,1516703453.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:53.342Z,1516703453.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:53.732Z,1516703453.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:53.753Z,1516703453.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:54.100Z,1516703454.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:54.151Z,1516703454.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:54.502Z,1516703454.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:54.526Z,1516703454.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:54.900Z,1516703454.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:54.930Z,1516703454.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:55.297Z,1516703455.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:55.317Z,1516703455.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:55.706Z,1516703455.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:55.721Z,1516703455.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:56.107Z,1516703456.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:56.166Z,1516703456.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:56.507Z,1516703456.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:56.522Z,1516703456.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:56.904Z,1516703456.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:56.927Z,1516703456.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:57.300Z,1516703457.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:57.321Z,1516703457.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:57.699Z,1516703457.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:57.735Z,1516703457.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:58.095Z,1516703458.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:58.129Z,1516703458.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:58.512Z,1516703458.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:58.549Z,1516703458.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:58.920Z,1516703458.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:58.945Z,1516703458.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:59.307Z,1516703459.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:59.385Z,1516703459.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:30:59.700Z,1516703459.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:30:59.753Z,1516703459.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:00.103Z,1516703460.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:00.129Z,1516703460.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:00.528Z,1516703460.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:00.556Z,1516703460.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:00.895Z,1516703460.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:00.957Z,1516703460.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:01.294Z,1516703461.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:01.342Z,1516703461.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:01.711Z,1516703461.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:01.749Z,1516703461.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:02.114Z,1516703462.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:02.161Z,1516703462.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:02.509Z,1516703462.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:02.550Z,1516703462.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:02.902Z,1516703462.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:02.949Z,1516703462.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:03.310Z,1516703463.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:03.349Z,1516703463.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:03.699Z,1516703463.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:03.743Z,1516703463.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:04.102Z,1516703464.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:04.121Z,1516703464.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:04.504Z,1516703464.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:04.544Z,1516703464.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:04.909Z,1516703464.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:04.952Z,1516703464.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:05.309Z,1516703465.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:05.361Z,1516703465.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:05.699Z,1516703465.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:05.770Z,1516703465.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:06.100Z,1516703466.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:06.152Z,1516703466.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:06.504Z,1516703466.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:06.531Z,1516703466.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:06.893Z,1516703466.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:06.929Z,1516703466.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:07.286Z,1516703467.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:07.301Z,1516703467.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:07.699Z,1516703467.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:07.730Z,1516703467.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:08.111Z,1516703468.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:08.137Z,1516703468.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:08.507Z,1516703468.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:08.532Z,1516703468.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:08.896Z,1516703468.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:08.933Z,1516703468.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:09.293Z,1516703469.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:09.308Z,1516703469.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:09.698Z,1516703469.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:09.713Z,1516703469.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:10.106Z,1516703470.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:10.121Z,1516703470.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:10.507Z,1516703470.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:10.522Z,1516703470.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:10.905Z,1516703470.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:10.925Z,1516703470.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:11.307Z,1516703471.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:11.322Z,1516703471.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:11.705Z,1516703471.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:11.719Z,1516703471.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:12.100Z,1516703472.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:12.115Z,1516703472.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:12.496Z,1516703472.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:12.511Z,1516703472.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:12.900Z,1516703472.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:12.915Z,1516703472.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:13.298Z,1516703473.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:13.318Z,1516703473.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:13.719Z,1516703473.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:13.751Z,1516703473.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:14.107Z,1516703474.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:14.128Z,1516703474.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:14.508Z,1516703474.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:14.529Z,1516703474.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:14.901Z,1516703474.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:14.916Z,1516703474.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:15.301Z,1516703475.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:15.316Z,1516703475.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:15.692Z,1516703475.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:15.724Z,1516703475.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:16.092Z,1516703476.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:16.119Z,1516703476.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:16.512Z,1516703476.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:16.527Z,1516703476.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:16.912Z,1516703476.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:16.927Z,1516703476.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:17.304Z,1516703477.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:17.326Z,1516703477.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:17.708Z,1516703477.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:17.723Z,1516703477.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:18.089Z,1516703478.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:18.117Z,1516703478.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:18.497Z,1516703478.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:18.524Z,1516703478.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:18.911Z,1516703478.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:18.926Z,1516703478.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:19.294Z,1516703479.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:19.321Z,1516703479.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:19.703Z,1516703479.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:19.736Z,1516703479.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:20.122Z,1516703480.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:20.141Z,1516703480.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:23.217Z,1516703483.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:23.232Z,1516703483.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:23.342Z,1516703483.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:23.377Z,1516703483.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:23.714Z,1516703483.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:23.730Z,1516703483.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:24.098Z,1516703484.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:24.133Z,1516703484.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:24.508Z,1516703484.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:24.531Z,1516703484.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:24.916Z,1516703484.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:24.931Z,1516703484.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:25.315Z,1516703485.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:25.330Z,1516703485.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:25.692Z,1516703485.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:25.721Z,1516703485.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:26.095Z,1516703486.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:26.102Z,1516703486.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x22744 got:0x43025 2018-01-23T10:31:26.129Z,1516703486.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:26.494Z,1516703486.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:26.532Z,1516703486.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:26.897Z,1516703486.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:26.929Z,1516703486.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:27.293Z,1516703487.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:27.323Z,1516703487.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:27.720Z,1516703487.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:27.727Z,1516703487.727 [PNI_TCM](ERROR): CRC does not match. Expected:0x25867 got:0x16910 2018-01-23T10:31:27.769Z,1516703487.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:28.114Z,1516703488.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:28.129Z,1516703488.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:28.520Z,1516703488.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:28.535Z,1516703488.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:28.892Z,1516703488.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:28.927Z,1516703488.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:29.293Z,1516703489.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:29.311Z,1516703489.311 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T10:31:29.329Z,1516703489.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:29.696Z,1516703489.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:29.733Z,1516703489.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:30.097Z,1516703490.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:30.128Z,1516703490.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:30.504Z,1516703490.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:30.537Z,1516703490.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:30.908Z,1516703490.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:30.945Z,1516703490.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:31.323Z,1516703491.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:31.338Z,1516703491.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:31.703Z,1516703491.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:31.718Z,1516703491.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:32.102Z,1516703492.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:32.151Z,1516703492.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:32.500Z,1516703492.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:32.517Z,1516703492.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:32.904Z,1516703492.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:32.919Z,1516703492.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:33.299Z,1516703493.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:33.322Z,1516703493.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:33.706Z,1516703493.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:33.753Z,1516703493.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:34.109Z,1516703494.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:34.117Z,1516703494.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x26886 got:0x38 2018-01-23T10:31:34.153Z,1516703494.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:34.509Z,1516703494.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:34.537Z,1516703494.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:34.931Z,1516703494.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:34.954Z,1516703494.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:35.309Z,1516703495.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:35.328Z,1516703495.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:35.712Z,1516703495.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:35.733Z,1516703495.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:36.109Z,1516703496.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:36.124Z,1516703496.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:36.513Z,1516703496.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:36.529Z,1516703496.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:36.912Z,1516703496.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:36.953Z,1516703496.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:37.313Z,1516703497.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:37.333Z,1516703497.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:37.700Z,1516703497.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:37.729Z,1516703497.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:38.105Z,1516703498.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:38.121Z,1516703498.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:38.517Z,1516703498.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:38.535Z,1516703498.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:38.919Z,1516703498.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:38.934Z,1516703498.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:39.310Z,1516703499.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:39.330Z,1516703499.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:39.696Z,1516703499.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:39.738Z,1516703499.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:40.092Z,1516703500.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:40.125Z,1516703500.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:40.522Z,1516703500.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:40.537Z,1516703500.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:40.917Z,1516703500.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:40.933Z,1516703500.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:41.305Z,1516703501.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:41.343Z,1516703501.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:41.693Z,1516703501.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:41.732Z,1516703501.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:42.091Z,1516703502.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:42.133Z,1516703502.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:42.509Z,1516703502.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:42.537Z,1516703502.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:42.909Z,1516703502.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:42.941Z,1516703502.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:43.303Z,1516703503.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:43.337Z,1516703503.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:43.693Z,1516703503.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:43.708Z,1516703503.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:44.091Z,1516703504.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:44.108Z,1516703504.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:44.513Z,1516703504.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:44.539Z,1516703504.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:44.911Z,1516703504.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:44.943Z,1516703504.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:45.315Z,1516703505.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:45.374Z,1516703505.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:45.693Z,1516703505.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:45.738Z,1516703505.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:46.092Z,1516703506.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:46.123Z,1516703506.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:46.503Z,1516703506.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:46.542Z,1516703506.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:46.920Z,1516703506.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:46.948Z,1516703506.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:47.317Z,1516703507.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:47.343Z,1516703507.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:47.707Z,1516703507.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:47.747Z,1516703507.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:48.100Z,1516703508.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:48.142Z,1516703508.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:48.515Z,1516703508.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:48.544Z,1516703508.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:48.921Z,1516703508.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:48.946Z,1516703508.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:49.313Z,1516703509.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:49.343Z,1516703509.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:49.705Z,1516703509.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:49.746Z,1516703509.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:50.104Z,1516703510.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:50.119Z,1516703510.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:50.511Z,1516703510.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:50.541Z,1516703510.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:50.921Z,1516703510.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:50.945Z,1516703510.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:51.315Z,1516703511.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:51.345Z,1516703511.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:51.701Z,1516703511.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:51.716Z,1516703511.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:52.097Z,1516703512.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:52.117Z,1516703512.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:52.507Z,1516703512.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:52.525Z,1516703512.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:52.907Z,1516703512.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:52.951Z,1516703512.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:53.306Z,1516703513.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:53.321Z,1516703513.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:53.702Z,1516703513.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:53.717Z,1516703513.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:54.100Z,1516703514.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:54.120Z,1516703514.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:54.506Z,1516703514.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:54.521Z,1516703514.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:54.907Z,1516703514.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:54.921Z,1516703514.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:55.306Z,1516703515.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:55.322Z,1516703515.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:55.702Z,1516703515.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:55.721Z,1516703515.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:56.102Z,1516703516.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:56.116Z,1516703516.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:56.116Z,1516703516.116 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145 2018-01-23T10:31:56.116Z,1516703516.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:31:56.118Z,1516703516.118 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:56.118Z,1516703516.118 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 145 2018-01-23T10:31:56.118Z,1516703516.118 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:31:56.120Z,1516703516.120 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:56.120Z,1516703516.120 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145 2018-01-23T10:31:56.120Z,1516703516.120 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:31:56.132Z,1516703516.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:31:56.132Z,1516703516.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:31:56.132Z,1516703516.132 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:31:56.515Z,1516703516.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:56.561Z,1516703516.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:31:56.561Z,1516703516.561 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145 2018-01-23T10:31:56.562Z,1516703516.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:31:56.562Z,1516703516.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 145 2018-01-23T10:31:56.562Z,1516703516.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:31:56.562Z,1516703516.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145 2018-01-23T10:31:56.915Z,1516703516.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:56.933Z,1516703516.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:31:56.933Z,1516703516.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:31:56.934Z,1516703516.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:31:56.934Z,1516703516.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:31:56.935Z,1516703516.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:31:56.935Z,1516703516.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:31:56.936Z,1516703516.936 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:31:56.936Z,1516703516.936 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:31:56.936Z,1516703516.936 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:31:57.307Z,1516703517.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:57.344Z,1516703517.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:31:57.345Z,1516703517.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:57.698Z,1516703517.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:57.724Z,1516703517.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:31:57.725Z,1516703517.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:58.092Z,1516703518.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:58.125Z,1516703518.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:31:58.126Z,1516703518.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:58.513Z,1516703518.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:58.530Z,1516703518.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:31:58.532Z,1516703518.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:58.921Z,1516703518.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:58.948Z,1516703518.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:31:58.949Z,1516703518.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:59.316Z,1516703519.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:59.361Z,1516703519.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:31:59.362Z,1516703519.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:31:59.701Z,1516703519.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:31:59.716Z,1516703519.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:31:59.717Z,1516703519.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:00.101Z,1516703520.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:00.116Z,1516703520.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:32:00.117Z,1516703520.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:00.503Z,1516703520.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:00.518Z,1516703520.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:32:00.520Z,1516703520.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:00.911Z,1516703520.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:00.925Z,1516703520.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:32:00.926Z,1516703520.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:01.308Z,1516703521.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:01.322Z,1516703521.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:32:01.323Z,1516703521.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:01.701Z,1516703521.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:01.715Z,1516703521.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:32:01.716Z,1516703521.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:02.101Z,1516703522.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:02.120Z,1516703522.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:32:02.121Z,1516703522.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:02.510Z,1516703522.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:02.528Z,1516703522.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:32:02.529Z,1516703522.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:02.913Z,1516703522.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:02.928Z,1516703522.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:32:02.929Z,1516703522.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:03.312Z,1516703523.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:03.326Z,1516703523.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:32:03.327Z,1516703523.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:03.697Z,1516703523.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:03.719Z,1516703523.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:32:03.720Z,1516703523.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:04.092Z,1516703524.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:04.123Z,1516703524.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:32:04.124Z,1516703524.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:04.503Z,1516703524.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:04.537Z,1516703524.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:32:04.538Z,1516703524.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:04.911Z,1516703524.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:04.935Z,1516703524.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:32:04.937Z,1516703524.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:05.314Z,1516703525.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:05.342Z,1516703525.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:32:05.343Z,1516703525.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:05.705Z,1516703525.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:05.742Z,1516703525.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:32:05.743Z,1516703525.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:06.093Z,1516703526.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:06.108Z,1516703526.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:32:06.109Z,1516703526.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:06.515Z,1516703526.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:06.541Z,1516703526.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:32:06.543Z,1516703526.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:06.919Z,1516703526.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:06.953Z,1516703526.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:32:06.954Z,1516703526.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:07.311Z,1516703527.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:07.344Z,1516703527.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:32:07.345Z,1516703527.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:07.705Z,1516703527.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:07.720Z,1516703527.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:32:07.721Z,1516703527.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:08.101Z,1516703528.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:08.115Z,1516703528.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:32:08.116Z,1516703528.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:08.503Z,1516703528.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:08.518Z,1516703528.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:32:08.519Z,1516703528.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:08.907Z,1516703528.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:08.921Z,1516703528.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:32:08.922Z,1516703528.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:09.306Z,1516703529.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:09.328Z,1516703529.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:32:09.329Z,1516703529.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:09.703Z,1516703529.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:09.717Z,1516703529.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:32:09.718Z,1516703529.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:10.100Z,1516703530.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:10.114Z,1516703530.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:32:10.115Z,1516703530.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:10.512Z,1516703530.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:10.526Z,1516703530.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:32:10.527Z,1516703530.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:10.910Z,1516703530.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:10.925Z,1516703530.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:32:10.925Z,1516703530.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:11.310Z,1516703531.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:11.332Z,1516703531.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:32:11.333Z,1516703531.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:11.703Z,1516703531.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:11.724Z,1516703531.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:32:11.725Z,1516703531.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:12.100Z,1516703532.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:12.116Z,1516703532.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:32:12.117Z,1516703532.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:12.501Z,1516703532.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:12.515Z,1516703532.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:32:12.516Z,1516703532.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:12.904Z,1516703532.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:12.924Z,1516703532.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:32:12.925Z,1516703532.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:13.303Z,1516703533.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:13.318Z,1516703533.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:32:13.319Z,1516703533.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:13.707Z,1516703533.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:13.722Z,1516703533.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:32:13.723Z,1516703533.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:14.104Z,1516703534.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:14.118Z,1516703534.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:32:14.119Z,1516703534.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:14.497Z,1516703534.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:14.524Z,1516703534.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:32:14.525Z,1516703534.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:14.902Z,1516703534.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:14.917Z,1516703534.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:32:14.918Z,1516703534.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:15.304Z,1516703535.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:15.318Z,1516703535.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:32:15.319Z,1516703535.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:15.710Z,1516703535.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:15.731Z,1516703535.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:32:15.732Z,1516703535.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:16.116Z,1516703536.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:16.131Z,1516703536.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:16.515Z,1516703536.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:16.536Z,1516703536.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:16.891Z,1516703536.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:16.927Z,1516703536.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:17.293Z,1516703537.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:17.341Z,1516703537.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:17.693Z,1516703537.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:17.728Z,1516703537.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:18.092Z,1516703538.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:18.120Z,1516703538.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:18.493Z,1516703538.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:18.520Z,1516703538.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:18.904Z,1516703538.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:18.931Z,1516703538.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:19.308Z,1516703539.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:19.345Z,1516703539.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:19.712Z,1516703539.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:19.737Z,1516703539.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:20.105Z,1516703540.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:20.145Z,1516703540.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:23.341Z,1516703543.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:23.357Z,1516703543.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:23.456Z,1516703543.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:23.471Z,1516703543.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:23.845Z,1516703543.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:23.865Z,1516703543.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:24.246Z,1516703544.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:24.270Z,1516703544.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:24.648Z,1516703544.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:24.663Z,1516703544.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:25.025Z,1516703545.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:25.058Z,1516703545.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:25.425Z,1516703545.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:25.461Z,1516703545.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:25.830Z,1516703545.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:25.857Z,1516703545.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:26.225Z,1516703546.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:26.253Z,1516703546.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:26.644Z,1516703546.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:26.675Z,1516703546.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:27.052Z,1516703547.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:27.071Z,1516703547.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:27.436Z,1516703547.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:27.475Z,1516703547.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:27.824Z,1516703547.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:27.840Z,1516703547.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:28.228Z,1516703548.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:28.245Z,1516703548.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:28.632Z,1516703548.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:28.650Z,1516703548.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:29.037Z,1516703549.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:29.052Z,1516703549.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:29.434Z,1516703549.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:29.449Z,1516703549.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:29.847Z,1516703549.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:29.884Z,1516703549.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:30.247Z,1516703550.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:30.262Z,1516703550.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:30.639Z,1516703550.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:30.654Z,1516703550.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:31.033Z,1516703551.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:31.048Z,1516703551.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:31.436Z,1516703551.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:31.461Z,1516703551.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:31.839Z,1516703551.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:31.854Z,1516703551.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:32.228Z,1516703552.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:32.251Z,1516703552.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:32.647Z,1516703552.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:32.662Z,1516703552.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:33.048Z,1516703553.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:33.064Z,1516703553.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:33.448Z,1516703553.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:33.464Z,1516703553.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:33.831Z,1516703553.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:33.852Z,1516703553.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:34.228Z,1516703554.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:34.251Z,1516703554.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:34.644Z,1516703554.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:34.662Z,1516703554.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:35.042Z,1516703555.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:35.056Z,1516703555.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:35.428Z,1516703555.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:35.450Z,1516703555.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:35.842Z,1516703555.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:35.858Z,1516703555.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:36.247Z,1516703556.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:36.261Z,1516703556.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:36.646Z,1516703556.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:36.661Z,1516703556.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:37.028Z,1516703557.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:37.050Z,1516703557.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:37.434Z,1516703557.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:37.449Z,1516703557.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:37.836Z,1516703557.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:37.851Z,1516703557.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:38.243Z,1516703558.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:38.259Z,1516703558.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:38.644Z,1516703558.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:38.659Z,1516703558.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:39.046Z,1516703559.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:39.061Z,1516703559.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:39.440Z,1516703559.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:39.467Z,1516703559.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:39.841Z,1516703559.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:39.856Z,1516703559.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:40.240Z,1516703560.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:40.261Z,1516703560.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:40.624Z,1516703560.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:40.657Z,1516703560.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:41.036Z,1516703561.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:41.051Z,1516703561.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:41.436Z,1516703561.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:41.456Z,1516703561.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:41.845Z,1516703561.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:41.865Z,1516703561.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:42.250Z,1516703562.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:42.265Z,1516703562.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:42.647Z,1516703562.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:42.662Z,1516703562.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:43.035Z,1516703563.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:43.057Z,1516703563.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:43.441Z,1516703563.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:43.456Z,1516703563.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:43.829Z,1516703563.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:43.856Z,1516703563.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:44.227Z,1516703564.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:44.261Z,1516703564.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:44.648Z,1516703564.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:44.663Z,1516703564.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:45.053Z,1516703565.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:45.077Z,1516703565.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:45.451Z,1516703565.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:45.473Z,1516703565.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:45.827Z,1516703565.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:45.854Z,1516703565.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:46.240Z,1516703566.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:46.261Z,1516703566.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:46.644Z,1516703566.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:46.661Z,1516703566.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:47.029Z,1516703567.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:47.064Z,1516703567.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:47.426Z,1516703567.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:47.465Z,1516703567.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:47.836Z,1516703567.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:47.871Z,1516703567.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:48.252Z,1516703568.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:48.267Z,1516703568.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:48.652Z,1516703568.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:48.673Z,1516703568.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:49.026Z,1516703569.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:49.060Z,1516703569.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:49.431Z,1516703569.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:49.468Z,1516703569.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:49.831Z,1516703569.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:49.866Z,1516703569.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:50.233Z,1516703570.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:50.268Z,1516703570.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:50.646Z,1516703570.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:50.680Z,1516703570.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:51.048Z,1516703571.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:51.074Z,1516703571.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:51.448Z,1516703571.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:51.474Z,1516703571.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:51.828Z,1516703571.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:51.844Z,1516703571.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:52.230Z,1516703572.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:52.249Z,1516703572.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:52.632Z,1516703572.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:52.655Z,1516703572.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:53.036Z,1516703573.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:53.051Z,1516703573.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:53.441Z,1516703573.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:53.461Z,1516703573.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:53.838Z,1516703573.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:53.855Z,1516703573.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:54.241Z,1516703574.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:54.260Z,1516703574.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:54.641Z,1516703574.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:54.657Z,1516703574.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:55.034Z,1516703575.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:55.050Z,1516703575.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:55.433Z,1516703575.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:55.461Z,1516703575.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:55.834Z,1516703575.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:55.842Z,1516703575.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x45605 got:0x32768 2018-01-23T10:32:55.861Z,1516703575.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:56.237Z,1516703576.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:56.257Z,1516703576.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:56.639Z,1516703576.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:56.654Z,1516703576.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:57.045Z,1516703577.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:57.061Z,1516703577.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:57.444Z,1516703577.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:57.459Z,1516703577.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:57.837Z,1516703577.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:57.851Z,1516703577.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:58.233Z,1516703578.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:58.256Z,1516703578.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:58.628Z,1516703578.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:58.669Z,1516703578.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:59.041Z,1516703579.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:59.055Z,1516703579.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:59.439Z,1516703579.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:59.454Z,1516703579.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:32:59.840Z,1516703579.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:32:59.863Z,1516703579.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:00.252Z,1516703580.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:00.267Z,1516703580.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:00.649Z,1516703580.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:00.669Z,1516703580.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:01.039Z,1516703581.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:01.054Z,1516703581.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:01.437Z,1516703581.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:01.452Z,1516703581.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:01.825Z,1516703581.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:01.876Z,1516703581.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:02.238Z,1516703582.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:02.248Z,1516703582.248 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T10:33:02.276Z,1516703582.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:02.646Z,1516703582.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:02.677Z,1516703582.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:03.039Z,1516703583.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:03.072Z,1516703583.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:03.454Z,1516703583.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:03.470Z,1516703583.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:03.826Z,1516703583.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:03.862Z,1516703583.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:04.223Z,1516703584.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:04.264Z,1516703584.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:04.649Z,1516703584.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:04.669Z,1516703584.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:05.050Z,1516703585.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:05.068Z,1516703585.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:05.436Z,1516703585.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:05.473Z,1516703585.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:05.829Z,1516703585.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:05.865Z,1516703585.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:06.234Z,1516703586.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:06.250Z,1516703586.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:06.644Z,1516703586.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:06.674Z,1516703586.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:07.062Z,1516703587.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:07.077Z,1516703587.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:07.441Z,1516703587.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:07.478Z,1516703587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:07.834Z,1516703587.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:07.849Z,1516703587.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:08.236Z,1516703588.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:08.284Z,1516703588.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:08.648Z,1516703588.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:08.676Z,1516703588.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:09.041Z,1516703589.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:09.074Z,1516703589.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:09.448Z,1516703589.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:09.478Z,1516703589.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:09.830Z,1516703589.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:09.858Z,1516703589.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:10.226Z,1516703590.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:10.249Z,1516703590.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:10.650Z,1516703590.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:10.685Z,1516703590.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:11.046Z,1516703591.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:11.076Z,1516703591.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:11.436Z,1516703591.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:11.478Z,1516703591.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:11.838Z,1516703591.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:11.858Z,1516703591.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:12.233Z,1516703592.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:12.253Z,1516703592.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:12.640Z,1516703592.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:12.656Z,1516703592.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:13.039Z,1516703593.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:13.081Z,1516703593.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:13.438Z,1516703593.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:13.464Z,1516703593.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:13.836Z,1516703593.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:13.856Z,1516703593.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:14.237Z,1516703594.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:14.254Z,1516703594.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:14.638Z,1516703594.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:14.681Z,1516703594.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:15.038Z,1516703595.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:15.059Z,1516703595.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:15.442Z,1516703595.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:15.460Z,1516703595.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:15.834Z,1516703595.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:15.852Z,1516703595.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:16.228Z,1516703596.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:16.248Z,1516703596.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:16.642Z,1516703596.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:16.659Z,1516703596.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:17.042Z,1516703597.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:17.061Z,1516703597.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:17.444Z,1516703597.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:17.461Z,1516703597.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:17.832Z,1516703597.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:17.881Z,1516703597.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:18.230Z,1516703598.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:18.257Z,1516703598.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:18.642Z,1516703598.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:18.661Z,1516703598.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:19.044Z,1516703599.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:19.061Z,1516703599.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:19.443Z,1516703599.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:19.485Z,1516703599.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:19.837Z,1516703599.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:19.853Z,1516703599.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:20.233Z,1516703600.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:20.248Z,1516703600.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:23.336Z,1516703603.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:23.352Z,1516703603.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:23.466Z,1516703603.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:23.500Z,1516703603.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:23.815Z,1516703603.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:23.862Z,1516703603.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:24.209Z,1516703604.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:24.241Z,1516703604.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:24.598Z,1516703604.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:24.613Z,1516703604.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:25.009Z,1516703605.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:25.040Z,1516703605.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:25.402Z,1516703605.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:25.416Z,1516703605.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:25.811Z,1516703605.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:25.839Z,1516703605.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:26.215Z,1516703606.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:26.230Z,1516703606.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:26.608Z,1516703606.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:26.622Z,1516703606.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:27.000Z,1516703607.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:27.027Z,1516703607.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:27.409Z,1516703607.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:27.424Z,1516703607.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:27.805Z,1516703607.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:27.820Z,1516703607.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:28.201Z,1516703608.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:28.229Z,1516703608.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:28.604Z,1516703608.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:28.620Z,1516703608.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:29.015Z,1516703609.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:29.030Z,1516703609.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:29.411Z,1516703609.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:29.439Z,1516703609.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:29.814Z,1516703609.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:29.830Z,1516703609.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:30.207Z,1516703610.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:30.228Z,1516703610.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:30.600Z,1516703610.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:30.622Z,1516703610.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:31.001Z,1516703611.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:31.024Z,1516703611.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:31.406Z,1516703611.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:31.428Z,1516703611.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:31.815Z,1516703611.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:31.830Z,1516703611.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:32.218Z,1516703612.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:32.234Z,1516703612.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:32.616Z,1516703612.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:32.633Z,1516703612.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:33.004Z,1516703613.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:33.023Z,1516703613.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:33.400Z,1516703613.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:33.422Z,1516703613.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:33.803Z,1516703613.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:33.825Z,1516703613.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:34.199Z,1516703614.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:34.221Z,1516703614.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:34.599Z,1516703614.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:34.632Z,1516703614.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:35.015Z,1516703615.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:35.030Z,1516703615.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:35.418Z,1516703615.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:35.433Z,1516703615.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:35.814Z,1516703615.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:35.829Z,1516703615.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:36.205Z,1516703616.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:36.224Z,1516703616.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:36.600Z,1516703616.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:36.631Z,1516703616.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:37.010Z,1516703617.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:37.025Z,1516703617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:37.396Z,1516703617.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:37.431Z,1516703617.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:37.817Z,1516703617.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:37.832Z,1516703617.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:38.223Z,1516703618.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:38.238Z,1516703618.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:38.623Z,1516703618.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:38.638Z,1516703618.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:38.995Z,1516703618.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:39.034Z,1516703619.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:39.397Z,1516703619.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:39.424Z,1516703619.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:39.797Z,1516703619.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:39.832Z,1516703619.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:40.196Z,1516703620.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:40.234Z,1516703620.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:40.609Z,1516703620.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:40.624Z,1516703620.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:41.017Z,1516703621.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:41.032Z,1516703621.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:41.413Z,1516703621.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:41.440Z,1516703621.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:41.817Z,1516703621.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:41.832Z,1516703621.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:42.196Z,1516703622.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:42.232Z,1516703622.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:42.600Z,1516703622.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:42.629Z,1516703622.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:43.018Z,1516703623.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:43.034Z,1516703623.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:43.417Z,1516703623.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:43.432Z,1516703623.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:43.820Z,1516703623.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:43.836Z,1516703623.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:44.216Z,1516703624.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:44.239Z,1516703624.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:44.617Z,1516703624.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:44.637Z,1516703624.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:44.995Z,1516703624.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:45.018Z,1516703625.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:45.397Z,1516703625.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:45.433Z,1516703625.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:45.796Z,1516703625.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:45.841Z,1516703625.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:46.195Z,1516703626.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:46.221Z,1516703626.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:46.596Z,1516703626.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:46.613Z,1516703626.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:47.007Z,1516703627.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:47.042Z,1516703627.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:47.407Z,1516703627.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:47.443Z,1516703627.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:47.820Z,1516703627.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:47.847Z,1516703627.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:48.200Z,1516703628.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:48.220Z,1516703628.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:48.604Z,1516703628.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:48.645Z,1516703628.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:49.002Z,1516703629.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:49.017Z,1516703629.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:49.404Z,1516703629.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:49.419Z,1516703629.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:49.815Z,1516703629.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:49.847Z,1516703629.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:50.223Z,1516703630.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:50.248Z,1516703630.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:50.611Z,1516703630.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:50.651Z,1516703630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:51.000Z,1516703631.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:51.020Z,1516703631.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:51.401Z,1516703631.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:51.429Z,1516703631.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:51.806Z,1516703631.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:51.820Z,1516703631.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:52.204Z,1516703632.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:52.220Z,1516703632.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:52.602Z,1516703632.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:52.625Z,1516703632.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:52.984Z,1516703632.984 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:33:52.984Z,1516703632.984 [NAL9602] Data Fault, FailCount= 5 2018-01-23T10:33:52.984Z,1516703632.984 [NAL9602](ERROR): Data Fault 2018-01-23T10:33:53.019Z,1516703633.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:53.034Z,1516703633.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:53.073Z,1516703633.073 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:33:53.073Z,1516703633.073 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T10:33:53.377Z,1516703633.377 [NAL9602](INFO): Powering down 2018-01-23T10:33:53.408Z,1516703633.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:53.423Z,1516703633.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:53.434Z,1516703633.434 [CBIT](INFO): Critical error at 20180123T103353 2018-01-23T10:33:53.805Z,1516703633.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:53.819Z,1516703633.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:54.204Z,1516703634.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:54.219Z,1516703634.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:54.604Z,1516703634.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:54.619Z,1516703634.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:55.003Z,1516703635.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:55.018Z,1516703635.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:55.403Z,1516703635.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:55.418Z,1516703635.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:55.807Z,1516703635.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:55.823Z,1516703635.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:56.203Z,1516703636.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:56.218Z,1516703636.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:56.603Z,1516703636.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:56.618Z,1516703636.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:57.001Z,1516703637.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:57.016Z,1516703637.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:57.403Z,1516703637.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:57.418Z,1516703637.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:57.807Z,1516703637.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:57.822Z,1516703637.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:58.201Z,1516703638.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:58.216Z,1516703638.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:58.603Z,1516703638.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:58.618Z,1516703638.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:59.003Z,1516703639.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:59.018Z,1516703639.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:59.401Z,1516703639.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:59.416Z,1516703639.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:33:59.807Z,1516703639.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:33:59.822Z,1516703639.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:00.208Z,1516703640.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:00.222Z,1516703640.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:00.608Z,1516703640.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:00.623Z,1516703640.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:01.004Z,1516703641.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:01.024Z,1516703641.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:01.408Z,1516703641.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:01.423Z,1516703641.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:01.803Z,1516703641.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:01.819Z,1516703641.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:02.203Z,1516703642.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:02.225Z,1516703642.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:02.600Z,1516703642.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:02.622Z,1516703642.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:03.005Z,1516703643.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:03.020Z,1516703643.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:03.414Z,1516703643.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:03.429Z,1516703643.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:03.804Z,1516703643.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:03.822Z,1516703643.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:04.194Z,1516703644.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:04.225Z,1516703644.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:04.608Z,1516703644.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:04.623Z,1516703644.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:05.010Z,1516703645.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:05.025Z,1516703645.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:05.396Z,1516703645.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:05.423Z,1516703645.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:05.796Z,1516703645.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:05.828Z,1516703645.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:06.196Z,1516703646.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:06.229Z,1516703646.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:06.607Z,1516703646.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:06.623Z,1516703646.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:07.008Z,1516703647.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:07.025Z,1516703647.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:07.396Z,1516703647.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:07.422Z,1516703647.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:07.796Z,1516703647.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:07.829Z,1516703647.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:08.207Z,1516703648.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:08.222Z,1516703648.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:08.596Z,1516703648.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:08.622Z,1516703648.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:08.996Z,1516703648.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:09.022Z,1516703649.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:09.396Z,1516703649.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:09.429Z,1516703649.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:09.796Z,1516703649.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:09.822Z,1516703649.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:10.211Z,1516703650.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:10.226Z,1516703650.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:10.596Z,1516703650.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:10.629Z,1516703650.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:11.008Z,1516703651.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:11.023Z,1516703651.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:11.397Z,1516703651.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:11.435Z,1516703651.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:11.796Z,1516703651.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:11.821Z,1516703651.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:12.208Z,1516703652.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:12.223Z,1516703652.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:12.596Z,1516703652.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:12.629Z,1516703652.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:13.007Z,1516703653.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:13.022Z,1516703653.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:13.403Z,1516703653.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:13.434Z,1516703653.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:13.807Z,1516703653.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:13.822Z,1516703653.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:14.196Z,1516703654.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:14.229Z,1516703654.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:14.596Z,1516703654.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:14.622Z,1516703654.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:14.996Z,1516703654.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:15.028Z,1516703655.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:15.396Z,1516703655.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:15.429Z,1516703655.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:15.796Z,1516703655.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:15.822Z,1516703655.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:16.196Z,1516703656.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:16.228Z,1516703656.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:16.596Z,1516703656.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:16.630Z,1516703656.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:16.996Z,1516703656.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:17.022Z,1516703657.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:17.408Z,1516703657.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:17.422Z,1516703657.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:17.816Z,1516703657.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:17.831Z,1516703657.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:18.194Z,1516703658.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:18.221Z,1516703658.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:18.600Z,1516703658.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:18.626Z,1516703658.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:18.996Z,1516703658.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:19.028Z,1516703659.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:19.399Z,1516703659.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:19.425Z,1516703659.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:19.796Z,1516703659.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:19.831Z,1516703659.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:20.196Z,1516703660.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:20.228Z,1516703660.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:20.600Z,1516703660.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:20.627Z,1516703660.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:23.702Z,1516703663.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:23.725Z,1516703663.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:23.738Z,1516703663.738 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:34:23.828Z,1516703663.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:23.868Z,1516703663.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:24.181Z,1516703664.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:24.207Z,1516703664.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:24.581Z,1516703664.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:24.597Z,1516703664.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:24.973Z,1516703664.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:24.988Z,1516703664.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:25.381Z,1516703665.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:25.395Z,1516703665.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:25.779Z,1516703665.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:25.793Z,1516703665.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:26.173Z,1516703666.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:26.188Z,1516703666.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:26.581Z,1516703666.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:26.595Z,1516703666.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:26.979Z,1516703666.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:26.993Z,1516703666.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:27.372Z,1516703667.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:27.394Z,1516703667.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:27.781Z,1516703667.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:27.795Z,1516703667.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:28.179Z,1516703668.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:28.193Z,1516703668.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:28.579Z,1516703668.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:28.594Z,1516703668.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:28.981Z,1516703668.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:28.996Z,1516703668.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:29.379Z,1516703669.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:29.393Z,1516703669.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:29.776Z,1516703669.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:29.791Z,1516703669.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:30.181Z,1516703670.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:30.196Z,1516703670.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:30.579Z,1516703670.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:30.593Z,1516703670.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:30.973Z,1516703670.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:30.988Z,1516703670.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:31.381Z,1516703671.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:31.399Z,1516703671.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:31.779Z,1516703671.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:31.793Z,1516703671.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:32.181Z,1516703672.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:32.196Z,1516703672.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:32.581Z,1516703672.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:32.595Z,1516703672.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:32.979Z,1516703672.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:32.993Z,1516703672.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:33.373Z,1516703673.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:33.388Z,1516703673.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:33.785Z,1516703673.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:33.799Z,1516703673.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:34.179Z,1516703674.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:34.193Z,1516703674.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:34.573Z,1516703674.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:34.588Z,1516703674.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:34.985Z,1516703674.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:34.999Z,1516703674.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:35.379Z,1516703675.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:35.393Z,1516703675.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:35.779Z,1516703675.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:35.794Z,1516703675.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:36.181Z,1516703676.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:36.196Z,1516703676.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:36.582Z,1516703676.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:36.596Z,1516703676.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:36.973Z,1516703676.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:36.992Z,1516703676.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:37.381Z,1516703677.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:37.396Z,1516703677.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:37.780Z,1516703677.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:37.794Z,1516703677.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:38.176Z,1516703678.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:38.191Z,1516703678.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:38.581Z,1516703678.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:38.596Z,1516703678.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:38.980Z,1516703678.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:38.995Z,1516703678.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:39.374Z,1516703679.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:39.390Z,1516703679.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:39.779Z,1516703679.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:39.794Z,1516703679.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:40.182Z,1516703680.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:40.197Z,1516703680.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:40.580Z,1516703680.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:40.595Z,1516703680.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:40.981Z,1516703680.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:40.996Z,1516703680.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:41.382Z,1516703681.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:41.401Z,1516703681.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:41.779Z,1516703681.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:41.794Z,1516703681.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:42.181Z,1516703682.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:42.196Z,1516703682.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:42.579Z,1516703682.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:42.601Z,1516703682.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:42.968Z,1516703682.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:42.995Z,1516703682.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:43.376Z,1516703683.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:43.409Z,1516703683.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:43.772Z,1516703683.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:43.807Z,1516703683.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:44.165Z,1516703684.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:44.180Z,1516703684.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:44.572Z,1516703684.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:44.586Z,1516703684.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:44.972Z,1516703684.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:44.987Z,1516703684.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:45.373Z,1516703685.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:45.388Z,1516703685.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:45.780Z,1516703685.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:45.794Z,1516703685.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:46.176Z,1516703686.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:46.191Z,1516703686.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:46.580Z,1516703686.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:46.595Z,1516703686.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:46.977Z,1516703686.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:46.992Z,1516703686.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:47.378Z,1516703687.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:47.393Z,1516703687.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:47.781Z,1516703687.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:47.796Z,1516703687.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:48.177Z,1516703688.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:48.192Z,1516703688.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:48.578Z,1516703688.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:48.593Z,1516703688.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:48.981Z,1516703688.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:48.996Z,1516703688.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:49.381Z,1516703689.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:49.395Z,1516703689.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:49.779Z,1516703689.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:49.794Z,1516703689.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:50.181Z,1516703690.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:50.196Z,1516703690.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:50.581Z,1516703690.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:50.596Z,1516703690.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:50.979Z,1516703690.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:50.994Z,1516703690.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:51.382Z,1516703691.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:51.397Z,1516703691.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:51.782Z,1516703691.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:51.797Z,1516703691.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:52.180Z,1516703692.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:52.195Z,1516703692.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:52.581Z,1516703692.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:52.597Z,1516703692.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:52.982Z,1516703692.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:52.997Z,1516703692.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:53.380Z,1516703693.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:53.395Z,1516703693.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:53.782Z,1516703693.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:53.797Z,1516703693.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:54.182Z,1516703694.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:54.197Z,1516703694.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:54.581Z,1516703694.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:54.596Z,1516703694.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:54.980Z,1516703694.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:54.995Z,1516703694.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:55.383Z,1516703695.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:55.398Z,1516703695.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:55.780Z,1516703695.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:55.795Z,1516703695.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.186Z,1516703696.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:56.201Z,1516703696.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.583Z,1516703696.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:56.598Z,1516703696.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.973Z,1516703696.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:56.989Z,1516703696.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.989Z,1516703696.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146 2018-01-23T10:34:56.989Z,1516703696.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:34:56.991Z,1516703696.991 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.991Z,1516703696.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 146 2018-01-23T10:34:56.992Z,1516703696.992 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:34:56.993Z,1516703696.993 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:56.993Z,1516703696.993 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146 2018-01-23T10:34:56.993Z,1516703696.993 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:34:57.006Z,1516703697.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:34:57.006Z,1516703697.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:34:57.006Z,1516703697.006 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:34:57.387Z,1516703697.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:57.413Z,1516703697.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:34:57.413Z,1516703697.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146 2018-01-23T10:34:57.414Z,1516703697.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:34:57.414Z,1516703697.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 146 2018-01-23T10:34:57.414Z,1516703697.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:34:57.414Z,1516703697.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146 2018-01-23T10:34:57.789Z,1516703697.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:57.802Z,1516703697.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:34:57.803Z,1516703697.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:34:57.803Z,1516703697.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:34:57.803Z,1516703697.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:34:57.804Z,1516703697.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:34:57.804Z,1516703697.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:34:57.805Z,1516703697.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:34:57.805Z,1516703697.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:34:57.805Z,1516703697.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:34:58.168Z,1516703698.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:58.203Z,1516703698.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:34:58.204Z,1516703698.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:58.584Z,1516703698.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:58.599Z,1516703698.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:34:58.600Z,1516703698.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:58.988Z,1516703698.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:59.003Z,1516703699.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:34:59.004Z,1516703699.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:59.366Z,1516703699.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:59.397Z,1516703699.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:34:59.398Z,1516703699.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:34:59.788Z,1516703699.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:34:59.803Z,1516703699.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:34:59.804Z,1516703699.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:00.184Z,1516703700.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:00.198Z,1516703700.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:35:00.199Z,1516703700.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:00.572Z,1516703700.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:00.598Z,1516703700.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:35:00.599Z,1516703700.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:00.985Z,1516703700.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:00.000Z,1516703701.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:35:01.000Z,1516703701.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:01.406Z,1516703701.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:01.442Z,1516703701.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T10:35:01.443Z,1516703701.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:01.784Z,1516703701.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:01.798Z,1516703701.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:35:01.799Z,1516703701.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:02.172Z,1516703702.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:02.199Z,1516703702.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:35:02.200Z,1516703702.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:02.585Z,1516703702.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:02.599Z,1516703702.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:35:02.600Z,1516703702.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:02.965Z,1516703702.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:03.009Z,1516703703.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:35:03.010Z,1516703703.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:03.372Z,1516703703.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:03.399Z,1516703703.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:35:03.400Z,1516703703.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:03.788Z,1516703703.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:03.802Z,1516703703.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:35:03.803Z,1516703703.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:04.166Z,1516703704.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:04.201Z,1516703704.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:35:04.202Z,1516703704.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:04.572Z,1516703704.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:04.599Z,1516703704.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:35:04.600Z,1516703704.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:04.983Z,1516703704.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:04.998Z,1516703704.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:35:04.999Z,1516703704.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:05.365Z,1516703705.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:05.399Z,1516703705.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:35:05.400Z,1516703705.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:05.772Z,1516703705.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:05.798Z,1516703705.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:35:05.799Z,1516703705.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:06.183Z,1516703706.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:06.198Z,1516703706.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:35:06.199Z,1516703706.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:06.572Z,1516703706.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:06.597Z,1516703706.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:35:06.598Z,1516703706.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:06.972Z,1516703706.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:06.997Z,1516703706.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:35:06.998Z,1516703706.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:07.383Z,1516703707.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:07.397Z,1516703707.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:35:07.398Z,1516703707.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:07.772Z,1516703707.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:07.797Z,1516703707.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:35:07.798Z,1516703707.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:08.172Z,1516703708.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:08.197Z,1516703708.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:35:08.198Z,1516703708.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:08.587Z,1516703708.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:08.602Z,1516703708.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:35:08.603Z,1516703708.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:08.965Z,1516703708.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:09.003Z,1516703709.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:35:09.004Z,1516703709.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:09.372Z,1516703709.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:09.398Z,1516703709.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:35:09.399Z,1516703709.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:09.783Z,1516703709.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:09.798Z,1516703709.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:35:09.799Z,1516703709.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:10.165Z,1516703710.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:10.199Z,1516703710.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:35:10.200Z,1516703710.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:10.572Z,1516703710.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:10.597Z,1516703710.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:35:10.598Z,1516703710.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:10.983Z,1516703710.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:10.998Z,1516703710.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:35:10.999Z,1516703710.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:11.365Z,1516703711.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:11.400Z,1516703711.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:35:11.401Z,1516703711.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:11.772Z,1516703711.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:11.797Z,1516703711.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:35:11.798Z,1516703711.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:12.176Z,1516703712.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:12.201Z,1516703712.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:35:12.202Z,1516703712.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:12.565Z,1516703712.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:12.592Z,1516703712.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:35:12.593Z,1516703712.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:12.976Z,1516703712.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:13.001Z,1516703713.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:35:13.002Z,1516703713.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:13.376Z,1516703713.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:13.401Z,1516703713.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:35:13.401Z,1516703713.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:13.766Z,1516703713.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:13.780Z,1516703713.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:35:13.781Z,1516703713.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:14.172Z,1516703714.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:14.203Z,1516703714.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:35:14.204Z,1516703714.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:14.576Z,1516703714.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:14.590Z,1516703714.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:35:14.617Z,1516703714.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:14.965Z,1516703714.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:14.980Z,1516703714.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:35:14.981Z,1516703714.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:15.380Z,1516703715.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:15.410Z,1516703715.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:35:15.411Z,1516703715.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:15.780Z,1516703715.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:15.811Z,1516703715.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:35:15.812Z,1516703715.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:16.169Z,1516703716.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:16.184Z,1516703716.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:35:16.185Z,1516703716.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:16.572Z,1516703716.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:16.592Z,1516703716.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:35:16.593Z,1516703716.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:16.973Z,1516703716.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:16.987Z,1516703716.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:35:16.988Z,1516703716.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:17.373Z,1516703717.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:17.388Z,1516703717.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:17.780Z,1516703717.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:17.795Z,1516703717.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:18.178Z,1516703718.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:18.192Z,1516703718.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:18.578Z,1516703718.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:18.593Z,1516703718.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:18.978Z,1516703718.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:18.993Z,1516703718.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:18.997Z,1516703718.997 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T10:30:18.9Z 2018-01-23T10:35:18.997Z,1516703718.997 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:35:18.997Z,1516703718.997 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:35:19.382Z,1516703719.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:19.397Z,1516703719.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:20.478Z,1516703720.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:20.494Z,1516703720.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:20.741Z,1516703720.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:20.785Z,1516703720.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:23.843Z,1516703723.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:23.880Z,1516703723.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:23.943Z,1516703723.943 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0172.lzma 2018-01-23T10:35:23.968Z,1516703723.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:24.005Z,1516703724.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:24.324Z,1516703724.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:24.351Z,1516703724.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:24.701Z,1516703724.701 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0172.lzma.bak 2018-01-23T10:35:24.702Z,1516703724.702 [DataOverHttps](INFO): SBD MOMSN=7755434 2018-01-23T10:35:24.729Z,1516703724.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:24.749Z,1516703724.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:25.363Z,1516703725.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:25.387Z,1516703725.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:25.525Z,1516703725.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:25.564Z,1516703725.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:28.620Z,1516703728.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:28.642Z,1516703728.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:28.743Z,1516703728.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:28.789Z,1516703728.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:29.097Z,1516703729.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:29.117Z,1516703729.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:29.493Z,1516703729.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:29.507Z,1516703729.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:29.897Z,1516703729.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:29.917Z,1516703729.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:30.289Z,1516703730.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:30.316Z,1516703730.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:33.494Z,1516703733.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:33.510Z,1516703733.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:33.588Z,1516703733.588 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0173.lzma 2018-01-23T10:35:33.608Z,1516703733.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:33.658Z,1516703733.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:33.964Z,1516703733.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:33.979Z,1516703733.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:34.333Z,1516703734.333 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0173.lzma.bak 2018-01-23T10:35:34.333Z,1516703734.333 [DataOverHttps](INFO): SBD MOMSN=7755437 2018-01-23T10:35:34.361Z,1516703734.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:34.397Z,1516703734.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:35.001Z,1516703735.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:35.016Z,1516703735.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:35.019Z,1516703735.019 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:35:35.019Z,1516703735.019 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:35:35.019Z,1516703735.019 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:35:35.166Z,1516703735.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:35.208Z,1516703735.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:38.256Z,1516703738.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:38.272Z,1516703738.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:38.370Z,1516703738.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:38.413Z,1516703738.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:38.728Z,1516703738.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:38.759Z,1516703738.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:39.124Z,1516703739.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:39.138Z,1516703739.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:39.536Z,1516703739.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:39.567Z,1516703739.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:39.921Z,1516703739.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:39.941Z,1516703739.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:40.319Z,1516703740.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:40.333Z,1516703740.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:40.720Z,1516703740.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:40.741Z,1516703740.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:41.125Z,1516703741.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:41.145Z,1516703741.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:41.522Z,1516703741.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:41.537Z,1516703741.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:41.923Z,1516703741.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:41.938Z,1516703741.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:42.323Z,1516703742.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:42.344Z,1516703742.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:42.723Z,1516703742.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:42.745Z,1516703742.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:43.124Z,1516703743.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:43.145Z,1516703743.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:43.524Z,1516703743.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:43.539Z,1516703743.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:43.923Z,1516703743.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:43.944Z,1516703743.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:44.322Z,1516703744.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:44.342Z,1516703744.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:44.722Z,1516703744.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:44.742Z,1516703744.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:45.124Z,1516703745.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:45.139Z,1516703745.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:45.529Z,1516703745.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:45.545Z,1516703745.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:45.929Z,1516703745.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:45.944Z,1516703745.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:46.325Z,1516703746.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:46.344Z,1516703746.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:46.729Z,1516703746.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:46.744Z,1516703746.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:47.121Z,1516703747.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:47.148Z,1516703747.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:47.530Z,1516703747.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:47.545Z,1516703747.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:47.928Z,1516703747.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:47.944Z,1516703747.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:48.316Z,1516703748.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:48.349Z,1516703748.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:48.720Z,1516703748.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:48.747Z,1516703748.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:49.113Z,1516703749.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:49.136Z,1516703749.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:49.516Z,1516703749.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:49.547Z,1516703749.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:49.916Z,1516703749.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:49.930Z,1516703749.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:50.316Z,1516703750.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:50.331Z,1516703750.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:50.724Z,1516703750.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:50.739Z,1516703750.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:51.133Z,1516703751.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:51.185Z,1516703751.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:51.522Z,1516703751.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:51.538Z,1516703751.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:51.930Z,1516703751.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:51.949Z,1516703751.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:52.345Z,1516703752.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:52.385Z,1516703752.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:52.740Z,1516703752.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:52.784Z,1516703752.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:53.131Z,1516703753.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:53.146Z,1516703753.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:53.197Z,1516703753.197 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:35:53.197Z,1516703753.197 [NAL9602] No Fault, FailCount= 5 2018-01-23T10:35:53.504Z,1516703753.504 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:35:53.536Z,1516703753.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:53.561Z,1516703753.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:53.923Z,1516703753.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:53.954Z,1516703753.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:54.320Z,1516703754.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:54.357Z,1516703754.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:54.742Z,1516703754.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:54.766Z,1516703754.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:55.140Z,1516703755.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:55.165Z,1516703755.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:55.531Z,1516703755.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:55.571Z,1516703755.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:55.926Z,1516703755.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:55.945Z,1516703755.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:56.326Z,1516703756.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:56.349Z,1516703756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:56.739Z,1516703756.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:56.790Z,1516703756.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:57.118Z,1516703757.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:57.179Z,1516703757.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:57.551Z,1516703757.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:57.597Z,1516703757.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:57.949Z,1516703757.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:58.001Z,1516703758.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:58.318Z,1516703758.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:58.400Z,1516703758.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:58.718Z,1516703758.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:58.753Z,1516703758.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:59.138Z,1516703759.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:59.174Z,1516703759.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:59.522Z,1516703759.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:59.587Z,1516703759.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:35:59.938Z,1516703759.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:35:59.977Z,1516703759.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:00.331Z,1516703760.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:00.370Z,1516703760.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:00.726Z,1516703760.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:00.785Z,1516703760.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:01.126Z,1516703761.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:01.146Z,1516703761.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:01.547Z,1516703761.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:01.588Z,1516703761.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:01.926Z,1516703761.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:01.981Z,1516703761.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:02.326Z,1516703762.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:02.355Z,1516703762.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:02.734Z,1516703762.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:02.754Z,1516703762.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:03.118Z,1516703763.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:03.169Z,1516703763.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:03.518Z,1516703763.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:03.552Z,1516703763.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:03.932Z,1516703763.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:03.961Z,1516703763.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:04.338Z,1516703764.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:04.372Z,1516703764.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:04.704Z,1516703764.704 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:36:04.722Z,1516703764.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:04.757Z,1516703764.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:05.121Z,1516703765.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:05.162Z,1516703765.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:05.531Z,1516703765.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:05.557Z,1516703765.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:05.935Z,1516703765.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:05.962Z,1516703765.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:06.335Z,1516703766.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:06.362Z,1516703766.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:06.721Z,1516703766.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:06.736Z,1516703766.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:07.124Z,1516703767.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:07.140Z,1516703767.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:07.524Z,1516703767.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:07.544Z,1516703767.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:07.922Z,1516703767.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:07.937Z,1516703767.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:08.331Z,1516703768.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:08.346Z,1516703768.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:08.731Z,1516703768.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:08.746Z,1516703768.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:09.132Z,1516703769.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:09.159Z,1516703769.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:09.518Z,1516703769.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:09.548Z,1516703769.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:09.917Z,1516703769.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:09.953Z,1516703769.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:10.321Z,1516703770.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:10.352Z,1516703770.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:10.717Z,1516703770.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:10.748Z,1516703770.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:11.125Z,1516703771.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:11.158Z,1516703771.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:11.544Z,1516703771.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:11.559Z,1516703771.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:11.931Z,1516703771.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:11.965Z,1516703771.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:12.328Z,1516703772.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:12.355Z,1516703772.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:12.717Z,1516703772.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:12.753Z,1516703772.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:13.121Z,1516703773.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:13.136Z,1516703773.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:13.526Z,1516703773.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:13.541Z,1516703773.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:13.922Z,1516703773.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:13.937Z,1516703773.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:14.336Z,1516703774.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:14.371Z,1516703774.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:14.740Z,1516703774.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:14.771Z,1516703774.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:15.127Z,1516703775.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:15.143Z,1516703775.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:15.523Z,1516703775.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:15.539Z,1516703775.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:15.924Z,1516703775.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:15.942Z,1516703775.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:16.324Z,1516703776.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:16.339Z,1516703776.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:16.724Z,1516703776.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:16.739Z,1516703776.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:17.124Z,1516703777.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:17.140Z,1516703777.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:17.528Z,1516703777.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:17.549Z,1516703777.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:17.931Z,1516703777.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:17.946Z,1516703777.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:18.331Z,1516703778.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:18.346Z,1516703778.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:18.725Z,1516703778.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:18.745Z,1516703778.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:19.122Z,1516703779.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:19.142Z,1516703779.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:19.521Z,1516703779.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:19.544Z,1516703779.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:19.923Z,1516703779.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:19.938Z,1516703779.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:20.334Z,1516703780.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:20.349Z,1516703780.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:20.735Z,1516703780.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:20.750Z,1516703780.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:21.135Z,1516703781.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:21.157Z,1516703781.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:21.525Z,1516703781.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:21.540Z,1516703781.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:21.920Z,1516703781.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:21.944Z,1516703781.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:22.320Z,1516703782.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:22.344Z,1516703782.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:22.725Z,1516703782.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:22.744Z,1516703782.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:23.119Z,1516703783.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:23.153Z,1516703783.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:23.539Z,1516703783.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:23.554Z,1516703783.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:23.943Z,1516703783.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:23.958Z,1516703783.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:24.344Z,1516703784.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:24.359Z,1516703784.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:24.717Z,1516703784.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:24.749Z,1516703784.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:25.117Z,1516703785.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:25.153Z,1516703785.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:25.522Z,1516703785.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:25.550Z,1516703785.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:25.917Z,1516703785.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:25.949Z,1516703785.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:26.332Z,1516703786.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:26.363Z,1516703786.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:26.745Z,1516703786.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:26.760Z,1516703786.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:27.144Z,1516703787.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:27.159Z,1516703787.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:27.516Z,1516703787.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:27.551Z,1516703787.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:27.916Z,1516703787.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:27.947Z,1516703787.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:28.316Z,1516703788.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:28.357Z,1516703788.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:28.721Z,1516703788.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:28.736Z,1516703788.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:29.124Z,1516703789.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:29.139Z,1516703789.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:29.535Z,1516703789.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:29.568Z,1516703789.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:29.943Z,1516703789.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:29.968Z,1516703789.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:30.339Z,1516703790.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:30.365Z,1516703790.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:30.728Z,1516703790.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:30.745Z,1516703790.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:31.123Z,1516703791.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:31.138Z,1516703791.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:31.533Z,1516703791.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:31.548Z,1516703791.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:31.926Z,1516703791.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:31.945Z,1516703791.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:32.332Z,1516703792.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:32.347Z,1516703792.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:32.731Z,1516703792.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:32.746Z,1516703792.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:33.128Z,1516703793.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:33.144Z,1516703793.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:33.524Z,1516703793.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:33.539Z,1516703793.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:33.925Z,1516703793.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:33.940Z,1516703793.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:34.324Z,1516703794.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:34.340Z,1516703794.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:34.718Z,1516703794.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:34.734Z,1516703794.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:35.120Z,1516703795.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:35.137Z,1516703795.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:35.536Z,1516703795.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:35.567Z,1516703795.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:38.635Z,1516703798.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:38.668Z,1516703798.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:38.765Z,1516703798.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:38.807Z,1516703798.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:39.117Z,1516703799.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:39.143Z,1516703799.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:39.525Z,1516703799.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:39.540Z,1516703799.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:39.917Z,1516703799.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:39.932Z,1516703799.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:40.323Z,1516703800.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:40.339Z,1516703800.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:40.727Z,1516703800.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:40.741Z,1516703800.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:41.123Z,1516703801.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:41.138Z,1516703801.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:41.518Z,1516703801.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:41.541Z,1516703801.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:41.925Z,1516703801.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:41.939Z,1516703801.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:42.317Z,1516703802.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:42.341Z,1516703802.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:42.725Z,1516703802.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:42.740Z,1516703802.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:43.121Z,1516703803.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:43.140Z,1516703803.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:43.531Z,1516703803.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:43.546Z,1516703803.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:43.929Z,1516703803.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:43.949Z,1516703803.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:44.330Z,1516703804.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:44.345Z,1516703804.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:44.720Z,1516703804.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:44.735Z,1516703804.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:45.116Z,1516703805.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:45.139Z,1516703805.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:45.522Z,1516703805.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:45.540Z,1516703805.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:45.910Z,1516703805.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:45.938Z,1516703805.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:46.332Z,1516703806.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:46.347Z,1516703806.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:46.735Z,1516703806.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:46.750Z,1516703806.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:47.128Z,1516703807.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:47.155Z,1516703807.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:47.516Z,1516703807.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:47.542Z,1516703807.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:47.912Z,1516703807.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:47.939Z,1516703807.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:48.310Z,1516703808.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:48.338Z,1516703808.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:48.713Z,1516703808.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:48.745Z,1516703808.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:49.116Z,1516703809.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:49.149Z,1516703809.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:49.524Z,1516703809.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:49.550Z,1516703809.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:49.931Z,1516703809.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:49.954Z,1516703809.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:50.335Z,1516703810.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:50.361Z,1516703810.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:50.716Z,1516703810.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:50.749Z,1516703810.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:51.113Z,1516703811.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:51.149Z,1516703811.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:51.514Z,1516703811.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:51.549Z,1516703811.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:51.917Z,1516703811.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:51.948Z,1516703811.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:52.328Z,1516703812.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:52.354Z,1516703812.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:52.727Z,1516703812.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:52.763Z,1516703812.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:53.124Z,1516703813.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:53.161Z,1516703813.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:53.516Z,1516703813.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:53.553Z,1516703813.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:53.912Z,1516703813.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:53.929Z,1516703813.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:54.310Z,1516703814.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:54.325Z,1516703814.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:54.725Z,1516703814.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:54.757Z,1516703814.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:55.120Z,1516703815.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:55.135Z,1516703815.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:55.527Z,1516703815.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:55.559Z,1516703815.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:55.931Z,1516703815.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:55.959Z,1516703815.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:56.334Z,1516703816.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:56.349Z,1516703816.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:56.721Z,1516703816.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:56.737Z,1516703816.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:57.119Z,1516703817.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:57.134Z,1516703817.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:57.521Z,1516703817.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:57.535Z,1516703817.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:57.918Z,1516703817.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:57.941Z,1516703817.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:58.335Z,1516703818.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:58.350Z,1516703818.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:58.726Z,1516703818.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:58.741Z,1516703818.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:59.127Z,1516703819.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:59.142Z,1516703819.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:59.521Z,1516703819.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:59.536Z,1516703819.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:36:59.922Z,1516703819.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:36:59.940Z,1516703819.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:00.316Z,1516703820.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:00.337Z,1516703820.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:00.720Z,1516703820.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:00.747Z,1516703820.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:01.121Z,1516703821.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:01.136Z,1516703821.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:01.531Z,1516703821.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:01.546Z,1516703821.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:01.935Z,1516703821.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:01.950Z,1516703821.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:02.331Z,1516703822.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:02.352Z,1516703822.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:02.727Z,1516703822.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:02.742Z,1516703822.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:03.121Z,1516703823.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:03.136Z,1516703823.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:03.523Z,1516703823.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:03.537Z,1516703823.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:03.922Z,1516703823.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:03.937Z,1516703823.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:04.332Z,1516703824.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:04.347Z,1516703824.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:04.731Z,1516703824.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:04.745Z,1516703824.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:05.129Z,1516703825.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:05.156Z,1516703825.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:05.516Z,1516703825.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:05.540Z,1516703825.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:05.922Z,1516703825.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:05.937Z,1516703825.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:06.310Z,1516703826.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:06.346Z,1516703826.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:06.713Z,1516703826.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:06.740Z,1516703826.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:07.112Z,1516703827.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:07.148Z,1516703827.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:07.528Z,1516703827.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:07.556Z,1516703827.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:07.939Z,1516703827.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:07.955Z,1516703827.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:08.340Z,1516703828.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:08.354Z,1516703828.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:08.717Z,1516703828.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:08.743Z,1516703828.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:09.113Z,1516703829.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:09.138Z,1516703829.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:09.513Z,1516703829.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:09.544Z,1516703829.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:09.916Z,1516703829.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:09.943Z,1516703829.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:10.328Z,1516703830.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:10.350Z,1516703830.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:10.736Z,1516703830.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:10.757Z,1516703830.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:11.132Z,1516703831.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:11.159Z,1516703831.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:11.520Z,1516703831.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:11.548Z,1516703831.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:11.913Z,1516703831.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:11.945Z,1516703831.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:12.311Z,1516703832.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:12.339Z,1516703832.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:12.714Z,1516703832.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:12.737Z,1516703832.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:13.113Z,1516703833.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:13.157Z,1516703833.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:13.524Z,1516703833.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:13.551Z,1516703833.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:13.928Z,1516703833.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:13.963Z,1516703833.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:14.324Z,1516703834.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:14.351Z,1516703834.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:14.712Z,1516703834.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:14.729Z,1516703834.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:15.116Z,1516703835.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:15.133Z,1516703835.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:15.521Z,1516703835.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:15.536Z,1516703835.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:15.911Z,1516703835.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:15.933Z,1516703835.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:16.335Z,1516703836.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:16.361Z,1516703836.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:16.739Z,1516703836.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:16.765Z,1516703836.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:17.127Z,1516703837.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:17.142Z,1516703837.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:17.521Z,1516703837.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:17.537Z,1516703837.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:17.920Z,1516703837.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:17.935Z,1516703837.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:18.317Z,1516703838.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:18.333Z,1516703838.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:18.722Z,1516703838.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:18.737Z,1516703838.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:19.120Z,1516703839.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:19.135Z,1516703839.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:19.531Z,1516703839.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:19.559Z,1516703839.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:19.927Z,1516703839.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:19.942Z,1516703839.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:20.334Z,1516703840.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:20.349Z,1516703840.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:20.724Z,1516703840.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:20.740Z,1516703840.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:21.120Z,1516703841.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:21.135Z,1516703841.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:21.522Z,1516703841.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:21.536Z,1516703841.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:21.924Z,1516703841.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:21.940Z,1516703841.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:22.326Z,1516703842.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:22.349Z,1516703842.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:22.731Z,1516703842.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:22.746Z,1516703842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:23.126Z,1516703843.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:23.145Z,1516703843.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:23.520Z,1516703843.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:23.538Z,1516703843.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:23.921Z,1516703843.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:23.940Z,1516703843.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:24.325Z,1516703844.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:24.345Z,1516703844.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:24.731Z,1516703844.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:24.746Z,1516703844.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:25.126Z,1516703845.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:25.148Z,1516703845.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:25.524Z,1516703845.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:25.540Z,1516703845.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:25.920Z,1516703845.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:25.935Z,1516703845.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:26.326Z,1516703846.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:26.341Z,1516703846.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:26.727Z,1516703846.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:26.742Z,1516703846.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:27.126Z,1516703847.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:27.145Z,1516703847.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:27.526Z,1516703847.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:27.541Z,1516703847.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:27.925Z,1516703847.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:27.940Z,1516703847.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:28.326Z,1516703848.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:28.341Z,1516703848.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:28.735Z,1516703848.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:28.750Z,1516703848.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:29.130Z,1516703849.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:29.146Z,1516703849.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:29.517Z,1516703849.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:29.540Z,1516703849.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:29.916Z,1516703849.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:29.943Z,1516703849.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:30.334Z,1516703850.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:30.350Z,1516703850.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:30.738Z,1516703850.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:30.753Z,1516703850.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:31.136Z,1516703851.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:31.151Z,1516703851.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:31.514Z,1516703851.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:31.549Z,1516703851.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:31.913Z,1516703851.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:31.945Z,1516703851.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:32.328Z,1516703852.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:32.356Z,1516703852.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:32.739Z,1516703852.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:32.754Z,1516703852.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:33.128Z,1516703853.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:33.150Z,1516703853.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:33.513Z,1516703853.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:33.550Z,1516703853.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:33.912Z,1516703853.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:33.939Z,1516703853.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:34.328Z,1516703854.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:34.359Z,1516703854.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:34.736Z,1516703854.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:34.751Z,1516703854.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:35.128Z,1516703855.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:35.150Z,1516703855.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:35.513Z,1516703855.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:35.545Z,1516703855.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:35.913Z,1516703855.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:35.949Z,1516703855.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:39.019Z,1516703859.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:39.049Z,1516703859.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:39.163Z,1516703859.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:39.189Z,1516703859.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:39.519Z,1516703859.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:39.545Z,1516703859.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:39.905Z,1516703859.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:39.941Z,1516703859.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:40.301Z,1516703860.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:40.317Z,1516703860.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:40.704Z,1516703860.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:40.720Z,1516703860.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:41.108Z,1516703861.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:41.145Z,1516703861.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:41.516Z,1516703861.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:41.537Z,1516703861.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:41.907Z,1516703861.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:41.922Z,1516703861.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:42.325Z,1516703862.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:42.352Z,1516703862.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:42.696Z,1516703862.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:42.737Z,1516703862.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:43.100Z,1516703863.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:43.115Z,1516703863.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:43.498Z,1516703863.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:43.517Z,1516703863.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:43.902Z,1516703863.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:43.917Z,1516703863.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:44.311Z,1516703864.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:44.326Z,1516703864.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:44.719Z,1516703864.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:44.751Z,1516703864.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:45.103Z,1516703865.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:45.125Z,1516703865.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:45.506Z,1516703865.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:45.521Z,1516703865.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:45.898Z,1516703865.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:45.926Z,1516703865.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:46.311Z,1516703866.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:46.326Z,1516703866.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:46.715Z,1516703866.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:46.729Z,1516703866.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:47.114Z,1516703867.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:47.129Z,1516703867.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:47.502Z,1516703867.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:47.517Z,1516703867.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:47.906Z,1516703867.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:47.921Z,1516703867.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:48.309Z,1516703868.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:48.324Z,1516703868.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:48.713Z,1516703868.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:48.729Z,1516703868.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:49.115Z,1516703869.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:49.130Z,1516703869.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:49.512Z,1516703869.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:49.527Z,1516703869.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:49.905Z,1516703869.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:49.921Z,1516703869.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:50.305Z,1516703870.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:50.320Z,1516703870.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:50.709Z,1516703870.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:50.725Z,1516703870.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:51.103Z,1516703871.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:51.118Z,1516703871.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:51.510Z,1516703871.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:51.525Z,1516703871.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:51.913Z,1516703871.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:51.933Z,1516703871.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:52.317Z,1516703872.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:52.332Z,1516703872.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:52.704Z,1516703872.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:52.719Z,1516703872.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:53.108Z,1516703873.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:53.129Z,1516703873.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:53.503Z,1516703873.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:53.520Z,1516703873.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:53.904Z,1516703873.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:53.920Z,1516703873.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:54.302Z,1516703874.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:54.317Z,1516703874.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:54.713Z,1516703874.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:54.729Z,1516703874.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:55.116Z,1516703875.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:55.130Z,1516703875.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:55.517Z,1516703875.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:55.537Z,1516703875.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:55.907Z,1516703875.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:55.922Z,1516703875.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:56.306Z,1516703876.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:56.321Z,1516703876.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:56.697Z,1516703876.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:56.729Z,1516703876.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.107Z,1516703877.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:57.122Z,1516703877.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.510Z,1516703877.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:57.534Z,1516703877.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.913Z,1516703877.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:57.933Z,1516703877.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.933Z,1516703877.933 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147 2018-01-23T10:37:57.933Z,1516703877.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:37:57.935Z,1516703877.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.935Z,1516703877.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 147 2018-01-23T10:37:57.935Z,1516703877.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:37:57.937Z,1516703877.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:57.937Z,1516703877.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147 2018-01-23T10:37:57.937Z,1516703877.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:37:57.961Z,1516703877.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:37:57.961Z,1516703877.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:37:57.961Z,1516703877.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:37:58.312Z,1516703878.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:58.338Z,1516703878.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:37:58.339Z,1516703878.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147 2018-01-23T10:37:58.339Z,1516703878.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:37:58.339Z,1516703878.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 147 2018-01-23T10:37:58.340Z,1516703878.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:37:58.340Z,1516703878.340 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147 2018-01-23T10:37:58.692Z,1516703878.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:58.728Z,1516703878.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:37:58.728Z,1516703878.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:37:58.728Z,1516703878.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:37:58.729Z,1516703878.729 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:37:58.729Z,1516703878.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:37:58.729Z,1516703878.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:37:58.730Z,1516703878.730 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:37:58.730Z,1516703878.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:37:58.730Z,1516703878.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:37:59.095Z,1516703879.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:59.102Z,1516703879.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x48793 got:0x13552 2018-01-23T10:37:59.128Z,1516703879.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:37:59.129Z,1516703879.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:59.495Z,1516703879.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:59.520Z,1516703879.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:37:59.521Z,1516703879.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:37:59.893Z,1516703879.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:37:59.927Z,1516703879.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:37:59.928Z,1516703879.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:00.297Z,1516703880.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:00.326Z,1516703880.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:38:00.327Z,1516703880.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:00.709Z,1516703880.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:00.731Z,1516703880.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:38:00.732Z,1516703880.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:01.116Z,1516703881.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:01.130Z,1516703881.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:38:01.131Z,1516703881.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:01.518Z,1516703881.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:01.533Z,1516703881.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:38:01.534Z,1516703881.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:01.892Z,1516703881.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:01.926Z,1516703881.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:38:01.927Z,1516703881.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:02.294Z,1516703882.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:02.314Z,1516703882.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T10:38:02.340Z,1516703882.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:38:02.341Z,1516703882.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:02.712Z,1516703882.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:02.726Z,1516703882.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:38:02.727Z,1516703882.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:03.092Z,1516703883.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:03.126Z,1516703883.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:38:03.127Z,1516703883.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:03.508Z,1516703883.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:03.533Z,1516703883.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:38:03.534Z,1516703883.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:03.923Z,1516703883.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:03.937Z,1516703883.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:38:03.938Z,1516703883.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:04.322Z,1516703884.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:04.344Z,1516703884.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:38:04.345Z,1516703884.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:04.700Z,1516703884.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:04.740Z,1516703884.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:38:04.741Z,1516703884.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:05.094Z,1516703885.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:05.123Z,1516703885.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:38:05.124Z,1516703885.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:05.492Z,1516703885.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:05.522Z,1516703885.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:38:05.523Z,1516703885.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:05.896Z,1516703885.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:05.921Z,1516703885.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:38:05.922Z,1516703885.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:06.297Z,1516703886.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:06.340Z,1516703886.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:38:06.341Z,1516703886.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:06.715Z,1516703886.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:06.730Z,1516703886.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:38:06.731Z,1516703886.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:07.118Z,1516703887.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:07.140Z,1516703887.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:38:07.141Z,1516703887.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:07.517Z,1516703887.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:07.536Z,1516703887.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:38:07.537Z,1516703887.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:07.893Z,1516703887.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:07.929Z,1516703887.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:38:07.930Z,1516703887.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:08.292Z,1516703888.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:08.337Z,1516703888.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:38:08.338Z,1516703888.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:08.697Z,1516703888.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:08.727Z,1516703888.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:38:08.728Z,1516703888.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:09.094Z,1516703889.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:09.122Z,1516703889.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:38:09.123Z,1516703889.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:09.502Z,1516703889.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:09.536Z,1516703889.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:38:09.537Z,1516703889.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:09.914Z,1516703889.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:09.937Z,1516703889.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:38:09.938Z,1516703889.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:10.308Z,1516703890.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:10.338Z,1516703890.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:38:10.339Z,1516703890.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:10.694Z,1516703890.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:10.723Z,1516703890.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:38:10.724Z,1516703890.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:11.093Z,1516703891.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:11.121Z,1516703891.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:38:11.122Z,1516703891.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:11.492Z,1516703891.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:11.531Z,1516703891.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:38:11.532Z,1516703891.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:11.893Z,1516703891.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:11.932Z,1516703891.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:38:11.933Z,1516703891.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:12.297Z,1516703892.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:12.327Z,1516703892.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:38:12.328Z,1516703892.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:12.707Z,1516703892.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:12.736Z,1516703892.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:38:12.737Z,1516703892.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:13.121Z,1516703893.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:13.137Z,1516703893.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:38:13.138Z,1516703893.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:13.518Z,1516703893.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:13.533Z,1516703893.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:38:13.534Z,1516703893.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:13.893Z,1516703893.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:13.926Z,1516703893.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:38:13.927Z,1516703893.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:14.292Z,1516703894.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:14.324Z,1516703894.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:38:14.325Z,1516703894.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:14.697Z,1516703894.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:14.727Z,1516703894.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:38:14.729Z,1516703894.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:15.100Z,1516703895.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:15.130Z,1516703895.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:38:15.131Z,1516703895.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:15.508Z,1516703895.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:15.533Z,1516703895.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:38:15.534Z,1516703895.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:15.915Z,1516703895.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:15.949Z,1516703895.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:38:15.950Z,1516703895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:16.316Z,1516703896.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:16.334Z,1516703896.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:38:16.335Z,1516703896.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:16.692Z,1516703896.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:16.742Z,1516703896.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:38:16.743Z,1516703896.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:17.091Z,1516703897.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:17.120Z,1516703897.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:38:17.121Z,1516703897.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:17.493Z,1516703897.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:17.508Z,1516703897.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:38:17.509Z,1516703897.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:17.894Z,1516703897.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:17.908Z,1516703897.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:38:17.909Z,1516703897.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:18.295Z,1516703898.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:18.310Z,1516703898.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:18.721Z,1516703898.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:18.746Z,1516703898.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:19.119Z,1516703899.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:19.164Z,1516703899.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:19.508Z,1516703899.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:19.548Z,1516703899.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:19.905Z,1516703899.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:19.939Z,1516703899.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:20.299Z,1516703900.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:20.319Z,1516703900.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:20.698Z,1516703900.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:20.721Z,1516703900.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:21.098Z,1516703901.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:21.125Z,1516703901.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:21.503Z,1516703901.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:21.519Z,1516703901.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:21.907Z,1516703901.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:21.927Z,1516703901.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:22.306Z,1516703902.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:22.326Z,1516703902.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:22.701Z,1516703902.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:22.716Z,1516703902.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:23.096Z,1516703903.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:23.116Z,1516703903.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:23.500Z,1516703903.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:23.517Z,1516703903.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:23.907Z,1516703903.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:23.921Z,1516703903.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:24.297Z,1516703904.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:24.317Z,1516703904.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:24.706Z,1516703904.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:24.722Z,1516703904.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:25.107Z,1516703905.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:25.126Z,1516703905.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:25.506Z,1516703905.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:25.521Z,1516703905.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:25.900Z,1516703905.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:25.918Z,1516703905.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:26.301Z,1516703906.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:26.316Z,1516703906.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:26.701Z,1516703906.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:26.716Z,1516703906.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:27.097Z,1516703907.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:27.124Z,1516703907.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:27.511Z,1516703907.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:27.532Z,1516703907.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:27.910Z,1516703907.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:27.929Z,1516703907.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:28.311Z,1516703908.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:28.330Z,1516703908.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:28.702Z,1516703908.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:28.717Z,1516703908.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:29.096Z,1516703909.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:29.117Z,1516703909.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:29.496Z,1516703909.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:29.524Z,1516703909.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:29.906Z,1516703909.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:29.921Z,1516703909.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:30.290Z,1516703910.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:30.322Z,1516703910.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:30.712Z,1516703910.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:30.728Z,1516703910.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:31.115Z,1516703911.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:31.138Z,1516703911.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:31.508Z,1516703911.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:31.534Z,1516703911.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:31.892Z,1516703911.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:31.925Z,1516703911.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:32.291Z,1516703912.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:32.327Z,1516703912.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:32.696Z,1516703912.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:32.728Z,1516703912.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:33.100Z,1516703913.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:33.121Z,1516703913.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:33.510Z,1516703913.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:33.525Z,1516703913.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:33.916Z,1516703913.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:33.931Z,1516703913.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:34.310Z,1516703914.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:34.325Z,1516703914.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:34.701Z,1516703914.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:34.716Z,1516703914.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:35.096Z,1516703915.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:35.117Z,1516703915.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:35.496Z,1516703915.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:35.518Z,1516703915.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:35.902Z,1516703915.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:35.925Z,1516703915.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:36.296Z,1516703916.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:36.319Z,1516703916.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:39.420Z,1516703919.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:39.435Z,1516703919.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:39.562Z,1516703919.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:39.585Z,1516703919.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:39.915Z,1516703919.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:39.961Z,1516703919.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:40.313Z,1516703920.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:40.328Z,1516703920.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:40.710Z,1516703920.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:40.725Z,1516703920.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:41.099Z,1516703921.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:41.122Z,1516703921.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:41.514Z,1516703921.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:41.536Z,1516703921.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:41.918Z,1516703921.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:41.933Z,1516703921.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:42.315Z,1516703922.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:42.337Z,1516703922.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:42.705Z,1516703922.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:42.724Z,1516703922.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:43.094Z,1516703923.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:43.126Z,1516703923.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:43.496Z,1516703923.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:43.529Z,1516703923.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:43.915Z,1516703923.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:43.930Z,1516703923.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:44.294Z,1516703924.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:44.326Z,1516703924.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:44.720Z,1516703924.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:44.734Z,1516703924.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:45.120Z,1516703925.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:45.135Z,1516703925.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:45.515Z,1516703925.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:45.536Z,1516703925.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:45.896Z,1516703925.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:45.929Z,1516703925.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:46.297Z,1516703926.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:46.325Z,1516703926.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:46.697Z,1516703926.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:46.733Z,1516703926.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:47.100Z,1516703927.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:47.127Z,1516703927.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:47.516Z,1516703927.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:47.535Z,1516703927.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:47.917Z,1516703927.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:47.937Z,1516703927.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:48.316Z,1516703928.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:48.331Z,1516703928.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:48.701Z,1516703928.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:48.729Z,1516703928.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:49.097Z,1516703929.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:49.129Z,1516703929.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:49.497Z,1516703929.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:49.533Z,1516703929.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:49.902Z,1516703929.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:49.937Z,1516703929.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:50.294Z,1516703930.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:50.310Z,1516703930.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:50.708Z,1516703930.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:50.739Z,1516703930.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:51.114Z,1516703931.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:51.143Z,1516703931.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:51.507Z,1516703931.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:51.531Z,1516703931.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:51.901Z,1516703931.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:51.916Z,1516703931.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:52.301Z,1516703932.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:52.329Z,1516703932.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:52.704Z,1516703932.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:52.719Z,1516703932.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:53.102Z,1516703933.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:53.130Z,1516703933.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:53.507Z,1516703933.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:53.523Z,1516703933.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:53.919Z,1516703933.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:53.934Z,1516703933.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:54.312Z,1516703934.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:54.326Z,1516703934.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:54.706Z,1516703934.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:54.721Z,1516703934.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:55.105Z,1516703935.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:55.125Z,1516703935.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:55.505Z,1516703935.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:55.520Z,1516703935.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:55.900Z,1516703935.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:55.929Z,1516703935.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:56.309Z,1516703936.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:56.324Z,1516703936.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:56.716Z,1516703936.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:56.731Z,1516703936.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:57.115Z,1516703937.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:57.137Z,1516703937.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:57.519Z,1516703937.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:57.534Z,1516703937.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:57.903Z,1516703937.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:57.925Z,1516703937.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:58.300Z,1516703938.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:58.337Z,1516703938.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:58.710Z,1516703938.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:58.725Z,1516703938.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:59.097Z,1516703939.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:59.134Z,1516703939.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:59.520Z,1516703939.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:59.541Z,1516703939.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:38:59.920Z,1516703939.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:38:59.936Z,1516703939.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:00.317Z,1516703940.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:00.332Z,1516703940.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:00.696Z,1516703940.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:00.733Z,1516703940.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:01.100Z,1516703941.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:01.128Z,1516703941.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:01.496Z,1516703941.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:01.535Z,1516703941.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:01.897Z,1516703941.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:01.931Z,1516703941.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:02.296Z,1516703942.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:02.330Z,1516703942.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:02.711Z,1516703942.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:02.735Z,1516703942.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:03.119Z,1516703943.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:03.135Z,1516703943.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:03.511Z,1516703943.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:03.533Z,1516703943.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:03.896Z,1516703943.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:03.932Z,1516703943.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:04.296Z,1516703944.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:04.333Z,1516703944.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:04.697Z,1516703944.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:04.729Z,1516703944.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:05.096Z,1516703945.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:05.133Z,1516703945.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:05.507Z,1516703945.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:05.550Z,1516703945.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:05.923Z,1516703945.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:05.941Z,1516703945.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:06.324Z,1516703946.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:06.339Z,1516703946.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:06.697Z,1516703946.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:06.733Z,1516703946.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:07.097Z,1516703947.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:07.133Z,1516703947.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:07.501Z,1516703947.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:07.537Z,1516703947.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:07.898Z,1516703947.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:07.933Z,1516703947.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:08.301Z,1516703948.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:08.333Z,1516703948.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:08.708Z,1516703948.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:08.744Z,1516703948.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:09.121Z,1516703949.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:09.136Z,1516703949.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:09.521Z,1516703949.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:09.536Z,1516703949.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:09.896Z,1516703949.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:09.934Z,1516703949.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:10.296Z,1516703950.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:10.334Z,1516703950.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:10.697Z,1516703950.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:10.725Z,1516703950.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:11.095Z,1516703951.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:11.137Z,1516703951.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:11.507Z,1516703951.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:11.545Z,1516703951.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:11.915Z,1516703951.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:11.942Z,1516703951.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:12.307Z,1516703952.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:12.338Z,1516703952.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:12.704Z,1516703952.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:12.719Z,1516703952.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:13.105Z,1516703953.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:13.121Z,1516703953.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:13.498Z,1516703953.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:13.530Z,1516703953.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:13.906Z,1516703953.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:13.921Z,1516703953.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:14.303Z,1516703954.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:14.329Z,1516703954.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:14.714Z,1516703954.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:14.733Z,1516703954.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:15.114Z,1516703955.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:15.129Z,1516703955.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:15.514Z,1516703955.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:15.537Z,1516703955.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:15.900Z,1516703955.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:15.922Z,1516703955.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:16.305Z,1516703956.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:16.320Z,1516703956.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:16.704Z,1516703956.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:16.724Z,1516703956.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:17.099Z,1516703957.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:17.131Z,1516703957.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:17.515Z,1516703957.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:17.530Z,1516703957.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:17.918Z,1516703957.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:17.933Z,1516703957.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:18.315Z,1516703958.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:18.330Z,1516703958.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:18.705Z,1516703958.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:18.720Z,1516703958.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:19.103Z,1516703959.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:19.123Z,1516703959.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:19.499Z,1516703959.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:19.531Z,1516703959.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:19.911Z,1516703959.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:19.925Z,1516703959.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:20.308Z,1516703960.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:20.329Z,1516703960.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:20.714Z,1516703960.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:20.730Z,1516703960.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:21.118Z,1516703961.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:21.141Z,1516703961.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:21.518Z,1516703961.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:21.533Z,1516703961.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:21.900Z,1516703961.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:21.922Z,1516703961.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:22.305Z,1516703962.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:22.325Z,1516703962.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:22.709Z,1516703962.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:22.725Z,1516703962.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:23.099Z,1516703963.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:23.130Z,1516703963.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:23.516Z,1516703963.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:23.530Z,1516703963.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:23.918Z,1516703963.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:23.941Z,1516703963.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:24.315Z,1516703964.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:24.330Z,1516703964.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:24.706Z,1516703964.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:24.721Z,1516703964.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:25.108Z,1516703965.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:25.123Z,1516703965.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:25.514Z,1516703965.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:25.530Z,1516703965.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:25.919Z,1516703965.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:25.941Z,1516703965.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:26.318Z,1516703966.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:26.341Z,1516703966.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:26.697Z,1516703966.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:26.724Z,1516703966.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:27.096Z,1516703967.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:27.131Z,1516703967.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:27.523Z,1516703967.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:27.538Z,1516703967.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:27.923Z,1516703967.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:27.938Z,1516703967.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:28.313Z,1516703968.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:28.339Z,1516703968.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:28.698Z,1516703968.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:28.725Z,1516703968.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:29.097Z,1516703969.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:29.123Z,1516703969.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:29.514Z,1516703969.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:29.538Z,1516703969.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:29.924Z,1516703969.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:29.939Z,1516703969.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:30.312Z,1516703970.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:30.334Z,1516703970.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:30.697Z,1516703970.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:30.729Z,1516703970.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:31.100Z,1516703971.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:31.133Z,1516703971.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:31.513Z,1516703971.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:31.534Z,1516703971.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:31.919Z,1516703971.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:31.941Z,1516703971.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:32.320Z,1516703972.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:32.335Z,1516703972.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:32.697Z,1516703972.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:32.733Z,1516703972.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:33.095Z,1516703973.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:33.128Z,1516703973.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:33.518Z,1516703973.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:33.533Z,1516703973.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:33.916Z,1516703973.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:33.948Z,1516703973.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:34.315Z,1516703974.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:34.329Z,1516703974.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:34.697Z,1516703974.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:34.729Z,1516703974.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:35.096Z,1516703975.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:35.129Z,1516703975.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:35.514Z,1516703975.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:35.539Z,1516703975.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:35.920Z,1516703975.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:35.935Z,1516703975.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:36.323Z,1516703976.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:36.338Z,1516703976.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:39.397Z,1516703979.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:39.426Z,1516703979.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:39.520Z,1516703979.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:39.553Z,1516703979.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:39.884Z,1516703979.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:39.899Z,1516703979.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:40.295Z,1516703980.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:40.330Z,1516703980.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:40.684Z,1516703980.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:40.699Z,1516703980.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:41.077Z,1516703981.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:41.092Z,1516703981.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:41.478Z,1516703981.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:41.493Z,1516703981.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:41.874Z,1516703981.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:41.899Z,1516703981.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:42.277Z,1516703982.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:42.292Z,1516703982.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:42.683Z,1516703982.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:42.698Z,1516703982.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:43.082Z,1516703983.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:43.097Z,1516703983.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:43.482Z,1516703983.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:43.497Z,1516703983.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:43.877Z,1516703983.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:43.892Z,1516703983.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:44.272Z,1516703984.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:44.293Z,1516703984.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:44.680Z,1516703984.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:44.697Z,1516703984.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:45.078Z,1516703985.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:45.092Z,1516703985.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:45.472Z,1516703985.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:45.492Z,1516703985.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:45.882Z,1516703985.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:45.901Z,1516703985.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:46.287Z,1516703986.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:46.301Z,1516703986.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:46.684Z,1516703986.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:46.699Z,1516703986.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:47.076Z,1516703987.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:47.097Z,1516703987.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:47.477Z,1516703987.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:47.492Z,1516703987.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:47.876Z,1516703987.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:47.895Z,1516703987.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:48.276Z,1516703988.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:48.291Z,1516703988.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:48.682Z,1516703988.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:48.697Z,1516703988.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:49.081Z,1516703989.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:49.101Z,1516703989.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:49.481Z,1516703989.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:49.501Z,1516703989.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:49.877Z,1516703989.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:49.892Z,1516703989.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:50.272Z,1516703990.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:50.292Z,1516703990.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:50.680Z,1516703990.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:50.695Z,1516703990.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:51.078Z,1516703991.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:51.093Z,1516703991.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:51.476Z,1516703991.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:51.491Z,1516703991.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:51.881Z,1516703991.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:51.897Z,1516703991.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:52.282Z,1516703992.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:52.296Z,1516703992.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:52.682Z,1516703992.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:52.701Z,1516703992.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:53.080Z,1516703993.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:53.095Z,1516703993.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:53.477Z,1516703993.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:53.492Z,1516703993.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:53.880Z,1516703993.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:53.896Z,1516703993.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:54.276Z,1516703994.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:54.291Z,1516703994.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:54.682Z,1516703994.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:54.697Z,1516703994.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:55.081Z,1516703995.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:55.101Z,1516703995.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:55.480Z,1516703995.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:55.501Z,1516703995.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:55.877Z,1516703995.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:55.892Z,1516703995.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:56.272Z,1516703996.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:56.292Z,1516703996.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:56.683Z,1516703996.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:56.698Z,1516703996.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:57.078Z,1516703997.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:57.092Z,1516703997.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:57.472Z,1516703997.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:57.492Z,1516703997.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:57.881Z,1516703997.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:57.901Z,1516703997.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:58.287Z,1516703998.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:58.301Z,1516703998.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:58.684Z,1516703998.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:58.698Z,1516703998.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:59.076Z,1516703999.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:59.091Z,1516703999.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:59.481Z,1516703999.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:59.496Z,1516703999.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:39:59.880Z,1516703999.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:39:59.901Z,1516703999.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:00.276Z,1516704000.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:00.291Z,1516704000.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:00.682Z,1516704000.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:00.704Z,1516704000.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:01.082Z,1516704001.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:01.105Z,1516704001.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:01.482Z,1516704001.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:01.497Z,1516704001.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:01.877Z,1516704001.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:01.892Z,1516704001.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:02.273Z,1516704002.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:02.292Z,1516704002.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:02.676Z,1516704002.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:02.691Z,1516704002.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:03.078Z,1516704003.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:03.093Z,1516704003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:03.473Z,1516704003.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:03.492Z,1516704003.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:03.882Z,1516704003.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:03.905Z,1516704003.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:04.287Z,1516704004.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:04.301Z,1516704004.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:04.684Z,1516704004.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:04.698Z,1516704004.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:05.076Z,1516704005.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:05.094Z,1516704005.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:05.478Z,1516704005.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:05.493Z,1516704005.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:05.876Z,1516704005.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:05.903Z,1516704005.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:06.277Z,1516704006.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:06.292Z,1516704006.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:06.686Z,1516704006.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:06.721Z,1516704006.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:07.087Z,1516704007.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:07.102Z,1516704007.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:07.487Z,1516704007.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:07.502Z,1516704007.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:07.877Z,1516704007.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:07.892Z,1516704007.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:08.272Z,1516704008.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:08.293Z,1516704008.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:08.672Z,1516704008.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:08.695Z,1516704008.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:09.078Z,1516704009.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:09.092Z,1516704009.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:09.472Z,1516704009.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:09.492Z,1516704009.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:09.887Z,1516704009.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:09.902Z,1516704009.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:10.287Z,1516704010.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:10.301Z,1516704010.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:10.688Z,1516704010.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:10.703Z,1516704010.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:11.077Z,1516704011.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:11.092Z,1516704011.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:11.477Z,1516704011.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:11.492Z,1516704011.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:11.873Z,1516704011.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:11.897Z,1516704011.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:12.272Z,1516704012.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:12.294Z,1516704012.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:12.687Z,1516704012.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:12.702Z,1516704012.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:13.087Z,1516704013.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:13.109Z,1516704013.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:13.487Z,1516704013.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:13.502Z,1516704013.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:13.878Z,1516704013.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:13.893Z,1516704013.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:14.272Z,1516704014.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:14.295Z,1516704014.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:14.672Z,1516704014.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:14.695Z,1516704014.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:15.076Z,1516704015.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:15.102Z,1516704015.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:15.473Z,1516704015.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:15.501Z,1516704015.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:15.887Z,1516704015.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:15.902Z,1516704015.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:16.291Z,1516704016.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:16.305Z,1516704016.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:16.687Z,1516704016.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:16.702Z,1516704016.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:17.072Z,1516704017.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:17.095Z,1516704017.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:17.477Z,1516704017.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:17.497Z,1516704017.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:17.882Z,1516704017.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:17.897Z,1516704017.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:18.272Z,1516704018.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:18.294Z,1516704018.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:18.688Z,1516704018.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:18.703Z,1516704018.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:19.086Z,1516704019.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:19.101Z,1516704019.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:19.490Z,1516704019.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:19.505Z,1516704019.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:19.878Z,1516704019.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:19.892Z,1516704019.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:20.278Z,1516704020.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:20.293Z,1516704020.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:20.671Z,1516704020.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:20.707Z,1516704020.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:21.083Z,1516704021.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:21.097Z,1516704021.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:21.469Z,1516704021.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:21.501Z,1516704021.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:21.884Z,1516704021.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:21.906Z,1516704021.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:22.293Z,1516704022.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:22.307Z,1516704022.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:22.688Z,1516704022.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:22.703Z,1516704022.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:23.068Z,1516704023.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:23.106Z,1516704023.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:23.468Z,1516704023.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:23.496Z,1516704023.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:23.869Z,1516704023.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:23.896Z,1516704023.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:24.268Z,1516704024.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:24.301Z,1516704024.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:24.688Z,1516704024.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:24.702Z,1516704024.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:25.086Z,1516704025.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:25.101Z,1516704025.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:25.484Z,1516704025.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:25.512Z,1516704025.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:25.872Z,1516704025.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:25.899Z,1516704025.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:26.266Z,1516704026.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:26.301Z,1516704026.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:26.668Z,1516704026.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:26.705Z,1516704026.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:27.073Z,1516704027.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:27.099Z,1516704027.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:27.466Z,1516704027.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:27.489Z,1516704027.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:27.879Z,1516704027.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:27.905Z,1516704027.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:28.292Z,1516704028.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:28.307Z,1516704028.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:28.691Z,1516704028.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:28.706Z,1516704028.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:29.076Z,1516704029.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:29.102Z,1516704029.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:29.468Z,1516704029.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:29.505Z,1516704029.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:29.873Z,1516704029.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:29.904Z,1516704029.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:30.267Z,1516704030.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:30.304Z,1516704030.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:30.679Z,1516704030.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:30.713Z,1516704030.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:31.079Z,1516704031.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:31.106Z,1516704031.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:31.480Z,1516704031.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:31.506Z,1516704031.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:31.868Z,1516704031.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:31.905Z,1516704031.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:32.272Z,1516704032.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:32.304Z,1516704032.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:32.668Z,1516704032.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:32.704Z,1516704032.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:33.069Z,1516704033.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:33.106Z,1516704033.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:33.466Z,1516704033.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:33.481Z,1516704033.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:33.879Z,1516704033.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:33.905Z,1516704033.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:34.283Z,1516704034.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:34.309Z,1516704034.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:34.683Z,1516704034.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:34.710Z,1516704034.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:35.068Z,1516704035.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:35.105Z,1516704035.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:35.473Z,1516704035.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:35.516Z,1516704035.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:35.519Z,1516704035.519 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T10:40:35.519Z,1516704035.519 [Default:CheckIn:C.Wait] Stopped 2018-01-23T10:40:35.519Z,1516704035.519 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T10:40:35.519Z,1516704035.519 [Default:CheckIn:D] Running Loop=1 2018-01-23T10:40:35.873Z,1516704035.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:35.888Z,1516704035.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:35.908Z,1516704035.908 [Default:CheckIn:D] Stopped 2018-01-23T10:40:35.908Z,1516704035.908 [Default:CheckIn:E] Running Loop=1 2018-01-23T10:40:36.280Z,1516704036.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:36.316Z,1516704036.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 442.730794 min 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn:E] Stopped 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn] Stopped 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn](INFO): Running loop #44 2018-01-23T10:40:36.320Z,1516704036.320 [Default:CheckIn] Running Loop=44 2018-01-23T10:40:36.321Z,1516704036.321 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T10:40:36.321Z,1516704036.321 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T10:40:36.692Z,1516704036.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:36.724Z,1516704036.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:39.805Z,1516704039.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:39.821Z,1516704039.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:39.927Z,1516704039.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:39.968Z,1516704039.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:40.272Z,1516704040.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:40.287Z,1516704040.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:40.678Z,1516704040.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:40.692Z,1516704040.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:41.069Z,1516704041.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:41.089Z,1516704041.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:41.470Z,1516704041.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:41.493Z,1516704041.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:41.879Z,1516704041.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:41.894Z,1516704041.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:42.278Z,1516704042.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:42.301Z,1516704042.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:42.682Z,1516704042.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:42.697Z,1516704042.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:43.074Z,1516704043.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:43.088Z,1516704043.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:43.468Z,1516704043.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:43.490Z,1516704043.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:43.881Z,1516704043.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:43.901Z,1516704043.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:44.274Z,1516704044.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:44.288Z,1516704044.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:44.687Z,1516704044.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:44.703Z,1516704044.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:45.083Z,1516704045.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:45.098Z,1516704045.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:45.482Z,1516704045.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:45.497Z,1516704045.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:45.873Z,1516704045.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:45.888Z,1516704045.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:46.268Z,1516704046.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:46.291Z,1516704046.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:46.673Z,1516704046.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:46.688Z,1516704046.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:47.072Z,1516704047.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:47.093Z,1516704047.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:47.468Z,1516704047.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:47.491Z,1516704047.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:47.884Z,1516704047.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:47.899Z,1516704047.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:48.282Z,1516704048.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:48.298Z,1516704048.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:48.682Z,1516704048.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:48.697Z,1516704048.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:49.074Z,1516704049.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:49.088Z,1516704049.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:49.468Z,1516704049.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:49.501Z,1516704049.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:49.878Z,1516704049.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:49.893Z,1516704049.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:50.264Z,1516704050.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:50.300Z,1516704050.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:50.692Z,1516704050.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:50.707Z,1516704050.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:51.087Z,1516704051.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:51.102Z,1516704051.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:51.489Z,1516704051.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:51.509Z,1516704051.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:51.868Z,1516704051.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:51.905Z,1516704051.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:52.296Z,1516704052.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:52.324Z,1516704052.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:52.696Z,1516704052.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:52.746Z,1516704052.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:53.075Z,1516704053.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:53.111Z,1516704053.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:53.472Z,1516704053.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:53.507Z,1516704053.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:53.895Z,1516704053.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:53.950Z,1516704053.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:54.294Z,1516704054.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:54.317Z,1516704054.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:54.679Z,1516704054.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:54.706Z,1516704054.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:55.103Z,1516704055.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:55.118Z,1516704055.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:55.468Z,1516704055.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:55.509Z,1516704055.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:55.881Z,1516704055.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:55.929Z,1516704055.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:56.276Z,1516704056.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:56.304Z,1516704056.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:56.685Z,1516704056.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:56.725Z,1516704056.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:57.105Z,1516704057.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:57.141Z,1516704057.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:57.513Z,1516704057.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:57.565Z,1516704057.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:57.876Z,1516704057.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:57.899Z,1516704057.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:58.295Z,1516704058.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:58.349Z,1516704058.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:58.692Z,1516704058.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:58.742Z,1516704058.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:58.756Z,1516704058.756 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:58.756Z,1516704058.756 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 148 2018-01-23T10:40:58.756Z,1516704058.756 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:40:58.758Z,1516704058.758 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:58.758Z,1516704058.758 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148 2018-01-23T10:40:58.758Z,1516704058.758 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:40:58.822Z,1516704058.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:40:58.822Z,1516704058.822 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:40:59.068Z,1516704059.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:59.104Z,1516704059.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:40:59.104Z,1516704059.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148 2018-01-23T10:40:59.105Z,1516704059.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:40:59.154Z,1516704059.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:40:59.154Z,1516704059.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:40:59.154Z,1516704059.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 148 2018-01-23T10:40:59.154Z,1516704059.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:40:59.154Z,1516704059.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148 2018-01-23T10:40:59.507Z,1516704059.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:59.549Z,1516704059.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:40:59.550Z,1516704059.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:40:59.550Z,1516704059.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:40:59.550Z,1516704059.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:40:59.555Z,1516704059.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:40:59.555Z,1516704059.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:40:59.580Z,1516704059.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:40:59.580Z,1516704059.580 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148 2018-01-23T10:40:59.877Z,1516704059.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:40:59.927Z,1516704059.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:40:59.928Z,1516704059.928 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:40:59.928Z,1516704059.928 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:41:00.289Z,1516704060.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:00.321Z,1516704060.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:41:00.322Z,1516704060.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:00.694Z,1516704060.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:00.741Z,1516704060.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:41:00.742Z,1516704060.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:01.075Z,1516704061.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:01.134Z,1516704061.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:41:01.135Z,1516704061.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:01.475Z,1516704061.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:01.494Z,1516704061.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:41:01.499Z,1516704061.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:01.882Z,1516704061.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:01.905Z,1516704061.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:41:01.906Z,1516704061.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:02.275Z,1516704062.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:02.330Z,1516704062.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:41:02.331Z,1516704062.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:02.685Z,1516704062.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:02.713Z,1516704062.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:41:02.714Z,1516704062.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:03.092Z,1516704063.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:03.110Z,1516704063.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:41:03.116Z,1516704063.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:03.486Z,1516704063.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:03.512Z,1516704063.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:41:03.513Z,1516704063.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:03.866Z,1516704063.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:03.905Z,1516704063.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:41:03.906Z,1516704063.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:04.295Z,1516704064.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:04.318Z,1516704064.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:41:04.323Z,1516704064.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:04.696Z,1516704064.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:04.724Z,1516704064.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:41:04.725Z,1516704064.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:05.076Z,1516704065.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:05.110Z,1516704065.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:41:05.120Z,1516704065.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:05.476Z,1516704065.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:05.526Z,1516704065.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:41:05.535Z,1516704065.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:05.886Z,1516704065.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:05.942Z,1516704065.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:41:05.943Z,1516704065.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:06.299Z,1516704066.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:06.314Z,1516704066.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:41:06.331Z,1516704066.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:06.687Z,1516704066.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:06.701Z,1516704066.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:41:06.702Z,1516704066.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:07.065Z,1516704067.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:07.099Z,1516704067.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:41:07.100Z,1516704067.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:07.462Z,1516704067.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:07.493Z,1516704067.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:41:07.494Z,1516704067.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:07.864Z,1516704067.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:07.890Z,1516704067.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:41:07.891Z,1516704067.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:08.263Z,1516704068.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:08.298Z,1516704068.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:41:08.299Z,1516704068.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:08.684Z,1516704068.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:08.704Z,1516704068.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:41:08.705Z,1516704068.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:09.084Z,1516704069.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:09.111Z,1516704069.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:41:09.112Z,1516704069.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:09.485Z,1516704069.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:09.504Z,1516704069.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:41:09.505Z,1516704069.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:09.869Z,1516704069.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:09.895Z,1516704069.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:41:09.896Z,1516704069.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:10.265Z,1516704070.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:10.295Z,1516704070.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:41:10.296Z,1516704070.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:10.678Z,1516704070.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:10.704Z,1516704070.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:41:10.705Z,1516704070.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:11.075Z,1516704071.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:11.110Z,1516704071.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:41:11.111Z,1516704071.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:11.487Z,1516704071.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:11.502Z,1516704071.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:41:11.503Z,1516704071.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:11.866Z,1516704071.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:11.901Z,1516704071.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:41:11.902Z,1516704071.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:12.262Z,1516704072.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:12.277Z,1516704072.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:41:12.278Z,1516704072.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:12.675Z,1516704072.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:12.701Z,1516704072.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:41:12.702Z,1516704072.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:13.079Z,1516704073.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:13.105Z,1516704073.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:41:13.106Z,1516704073.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:13.475Z,1516704073.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:13.501Z,1516704073.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:41:13.502Z,1516704073.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:13.869Z,1516704073.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:13.904Z,1516704073.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:41:13.905Z,1516704073.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:14.265Z,1516704074.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:14.300Z,1516704074.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:41:14.301Z,1516704074.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:14.683Z,1516704074.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:14.709Z,1516704074.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:41:14.710Z,1516704074.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:15.087Z,1516704075.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:15.116Z,1516704075.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:41:15.117Z,1516704075.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:15.487Z,1516704075.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:15.514Z,1516704075.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:41:15.515Z,1516704075.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:15.873Z,1516704075.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:15.908Z,1516704075.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:41:15.909Z,1516704075.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:16.269Z,1516704076.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:16.284Z,1516704076.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:41:16.285Z,1516704076.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:16.669Z,1516704076.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:16.688Z,1516704076.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:41:16.689Z,1516704076.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:17.074Z,1516704077.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:17.089Z,1516704077.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:41:17.090Z,1516704077.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:17.470Z,1516704077.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:17.489Z,1516704077.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:41:17.490Z,1516704077.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:17.879Z,1516704077.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:17.894Z,1516704077.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:41:17.895Z,1516704077.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:18.279Z,1516704078.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:18.294Z,1516704078.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:41:18.295Z,1516704078.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:18.678Z,1516704078.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:18.692Z,1516704078.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:41:18.693Z,1516704078.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:19.074Z,1516704079.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:19.088Z,1516704079.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:41:19.089Z,1516704079.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:19.473Z,1516704079.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:19.488Z,1516704079.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:19.872Z,1516704079.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:19.899Z,1516704079.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:20.278Z,1516704080.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:20.297Z,1516704080.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:20.683Z,1516704080.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:20.698Z,1516704080.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:21.082Z,1516704081.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:21.105Z,1516704081.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:21.483Z,1516704081.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:21.498Z,1516704081.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:21.872Z,1516704081.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:21.899Z,1516704081.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:22.277Z,1516704082.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:22.292Z,1516704082.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:22.688Z,1516704082.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:22.703Z,1516704082.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:23.087Z,1516704083.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:23.102Z,1516704083.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:23.480Z,1516704083.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:23.507Z,1516704083.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:23.866Z,1516704083.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:23.894Z,1516704083.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:24.265Z,1516704084.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:24.297Z,1516704084.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:24.688Z,1516704084.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:24.703Z,1516704084.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:25.097Z,1516704085.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:25.117Z,1516704085.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:25.476Z,1516704085.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:25.513Z,1516704085.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:25.866Z,1516704085.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:25.897Z,1516704085.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:26.265Z,1516704086.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:26.308Z,1516704086.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:26.684Z,1516704086.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:26.717Z,1516704086.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:27.094Z,1516704087.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:27.109Z,1516704087.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:27.494Z,1516704087.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:27.510Z,1516704087.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:27.877Z,1516704087.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:27.907Z,1516704087.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:28.276Z,1516704088.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:28.305Z,1516704088.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:28.683Z,1516704088.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:28.713Z,1516704088.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:29.083Z,1516704089.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:29.106Z,1516704089.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:29.499Z,1516704089.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:29.514Z,1516704089.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:29.875Z,1516704089.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:29.906Z,1516704089.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:30.273Z,1516704090.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:30.289Z,1516704090.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:30.684Z,1516704090.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:30.720Z,1516704090.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:31.088Z,1516704091.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:31.119Z,1516704091.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:31.492Z,1516704091.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:31.515Z,1516704091.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:31.868Z,1516704091.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:31.896Z,1516704091.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:32.277Z,1516704092.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:32.293Z,1516704092.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:32.678Z,1516704092.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:32.694Z,1516704092.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:33.091Z,1516704093.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:33.126Z,1516704093.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:33.479Z,1516704093.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:33.494Z,1516704093.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:33.869Z,1516704093.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:33.892Z,1516704093.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:34.270Z,1516704094.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:34.289Z,1516704094.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:34.687Z,1516704094.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:34.702Z,1516704094.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:35.088Z,1516704095.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:35.103Z,1516704095.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:35.484Z,1516704095.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:35.498Z,1516704095.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:35.874Z,1516704095.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:35.889Z,1516704095.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:36.280Z,1516704096.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:36.301Z,1516704096.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:36.686Z,1516704096.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:36.709Z,1516704096.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:37.087Z,1516704097.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:37.102Z,1516704097.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:40.388Z,1516704100.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:40.403Z,1516704100.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:40.509Z,1516704100.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:40.545Z,1516704100.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:40.853Z,1516704100.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:40.869Z,1516704100.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:41.259Z,1516704101.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:41.274Z,1516704101.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:41.652Z,1516704101.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:41.668Z,1516704101.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:42.060Z,1516704102.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:42.164Z,1516704102.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:42.469Z,1516704102.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:42.488Z,1516704102.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:42.869Z,1516704102.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:42.889Z,1516704102.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:43.244Z,1516704103.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:43.273Z,1516704103.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:43.644Z,1516704103.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:43.680Z,1516704103.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:44.059Z,1516704104.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:44.075Z,1516704104.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:44.444Z,1516704104.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:44.472Z,1516704104.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:44.868Z,1516704104.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:44.883Z,1516704104.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:45.261Z,1516704105.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:45.288Z,1516704105.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:45.667Z,1516704105.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:45.682Z,1516704105.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:46.045Z,1516704106.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:46.081Z,1516704106.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:46.442Z,1516704106.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:46.503Z,1516704106.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:46.846Z,1516704106.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:46.874Z,1516704106.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:47.245Z,1516704107.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:47.277Z,1516704107.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:47.645Z,1516704107.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:47.681Z,1516704107.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:48.068Z,1516704108.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:48.083Z,1516704108.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:48.467Z,1516704108.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:48.493Z,1516704108.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:48.855Z,1516704108.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:48.892Z,1516704108.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:49.244Z,1516704109.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:49.282Z,1516704109.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:49.645Z,1516704109.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:49.681Z,1516704109.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:50.046Z,1516704110.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:50.073Z,1516704110.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:50.445Z,1516704110.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:50.485Z,1516704110.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:50.859Z,1516704110.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:50.886Z,1516704110.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:51.256Z,1516704111.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:51.287Z,1516704111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:51.667Z,1516704111.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:51.693Z,1516704111.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:52.048Z,1516704112.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:52.064Z,1516704112.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:52.449Z,1516704112.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:52.469Z,1516704112.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:52.851Z,1516704112.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:52.867Z,1516704112.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:53.249Z,1516704113.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:53.273Z,1516704113.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:53.653Z,1516704113.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:53.669Z,1516704113.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:54.067Z,1516704114.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:54.101Z,1516704114.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:54.458Z,1516704114.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:54.472Z,1516704114.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:54.856Z,1516704114.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:54.871Z,1516704114.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:55.252Z,1516704115.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:55.267Z,1516704115.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:55.652Z,1516704115.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:55.673Z,1516704115.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:56.054Z,1516704116.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:56.070Z,1516704116.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:56.450Z,1516704116.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:56.473Z,1516704116.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:56.859Z,1516704116.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:56.874Z,1516704116.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:57.257Z,1516704117.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:57.273Z,1516704117.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:57.658Z,1516704117.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:57.673Z,1516704117.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:58.053Z,1516704118.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:58.068Z,1516704118.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:58.448Z,1516704118.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:58.468Z,1516704118.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:58.848Z,1516704118.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:58.877Z,1516704118.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:59.257Z,1516704119.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:59.271Z,1516704119.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:41:59.657Z,1516704119.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:41:59.673Z,1516704119.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:00.057Z,1516704120.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:00.073Z,1516704120.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:00.458Z,1516704120.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:00.473Z,1516704120.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:00.858Z,1516704120.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:00.873Z,1516704120.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:01.252Z,1516704121.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:01.268Z,1516704121.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:01.653Z,1516704121.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:01.668Z,1516704121.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:02.056Z,1516704122.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:02.073Z,1516704122.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:02.452Z,1516704122.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:02.468Z,1516704122.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:02.858Z,1516704122.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:02.880Z,1516704122.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:03.257Z,1516704123.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:03.273Z,1516704123.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:03.658Z,1516704123.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:03.673Z,1516704123.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:04.055Z,1516704124.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:04.070Z,1516704124.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:04.448Z,1516704124.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:04.468Z,1516704124.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:04.852Z,1516704124.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:04.867Z,1516704124.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:05.254Z,1516704125.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:05.268Z,1516704125.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:05.652Z,1516704125.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:05.667Z,1516704125.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:06.058Z,1516704126.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:06.074Z,1516704126.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:06.459Z,1516704126.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:06.474Z,1516704126.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:06.860Z,1516704126.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:06.875Z,1516704126.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:07.252Z,1516704127.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:07.267Z,1516704127.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:07.648Z,1516704127.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:07.678Z,1516704127.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:08.052Z,1516704128.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:08.071Z,1516704128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:08.452Z,1516704128.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:08.467Z,1516704128.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:08.858Z,1516704128.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:08.880Z,1516704128.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:09.258Z,1516704129.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:09.273Z,1516704129.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:09.658Z,1516704129.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:09.673Z,1516704129.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:10.054Z,1516704130.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:10.069Z,1516704130.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:10.448Z,1516704130.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:10.468Z,1516704130.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:10.852Z,1516704130.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:10.867Z,1516704130.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:11.249Z,1516704131.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:11.276Z,1516704131.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:11.680Z,1516704131.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:11.715Z,1516704131.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:12.062Z,1516704132.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:12.078Z,1516704132.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:12.467Z,1516704132.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:12.482Z,1516704132.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:12.863Z,1516704132.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:12.885Z,1516704132.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:13.248Z,1516704133.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:13.271Z,1516704133.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:13.649Z,1516704133.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:13.672Z,1516704133.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:14.059Z,1516704134.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:14.074Z,1516704134.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:14.447Z,1516704134.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:14.480Z,1516704134.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:14.864Z,1516704134.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:14.879Z,1516704134.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:15.267Z,1516704135.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:15.282Z,1516704135.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:15.660Z,1516704135.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:15.687Z,1516704135.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:16.055Z,1516704136.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:16.076Z,1516704136.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:16.444Z,1516704136.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:16.481Z,1516704136.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:16.848Z,1516704136.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:16.875Z,1516704136.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:17.246Z,1516704137.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:17.273Z,1516704137.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:17.649Z,1516704137.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:17.721Z,1516704137.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:18.063Z,1516704138.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:18.079Z,1516704138.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:18.466Z,1516704138.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:18.489Z,1516704138.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:18.868Z,1516704138.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:18.883Z,1516704138.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:19.244Z,1516704139.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:19.288Z,1516704139.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:19.645Z,1516704139.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:19.682Z,1516704139.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:20.045Z,1516704140.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:20.069Z,1516704140.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:20.443Z,1516704140.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:20.485Z,1516704140.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:20.859Z,1516704140.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:20.893Z,1516704140.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:21.259Z,1516704141.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:21.286Z,1516704141.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:21.656Z,1516704141.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:21.693Z,1516704141.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:22.053Z,1516704142.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:22.093Z,1516704142.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:22.452Z,1516704142.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:22.473Z,1516704142.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:22.852Z,1516704142.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:22.867Z,1516704142.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:23.252Z,1516704143.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:23.267Z,1516704143.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:23.656Z,1516704143.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:23.674Z,1516704143.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:24.068Z,1516704144.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:24.103Z,1516704144.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:24.463Z,1516704144.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:24.479Z,1516704144.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:24.858Z,1516704144.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:24.873Z,1516704144.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:25.253Z,1516704145.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:25.273Z,1516704145.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:25.653Z,1516704145.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:25.669Z,1516704145.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:26.049Z,1516704146.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:26.077Z,1516704146.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:26.457Z,1516704146.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:26.473Z,1516704146.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:26.863Z,1516704146.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:26.879Z,1516704146.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:27.262Z,1516704147.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:27.285Z,1516704147.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:27.664Z,1516704147.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:27.681Z,1516704147.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:28.054Z,1516704148.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:28.069Z,1516704148.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:28.449Z,1516704148.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:28.472Z,1516704148.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:28.847Z,1516704148.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:28.881Z,1516704148.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:29.255Z,1516704149.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:29.270Z,1516704149.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:29.654Z,1516704149.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:29.678Z,1516704149.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:30.064Z,1516704150.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:30.085Z,1516704150.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:30.467Z,1516704150.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:30.482Z,1516704150.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:30.863Z,1516704150.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:30.885Z,1516704150.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:31.256Z,1516704151.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:31.274Z,1516704151.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:31.653Z,1516704151.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:31.673Z,1516704151.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:32.057Z,1516704152.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:32.073Z,1516704152.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:32.448Z,1516704152.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:32.470Z,1516704152.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:32.864Z,1516704152.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:32.878Z,1516704152.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:33.266Z,1516704153.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:33.282Z,1516704153.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:33.666Z,1516704153.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:33.689Z,1516704153.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:34.045Z,1516704154.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:34.071Z,1516704154.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:34.445Z,1516704154.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:34.477Z,1516704154.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:34.843Z,1516704154.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:34.877Z,1516704154.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:35.245Z,1516704155.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:35.280Z,1516704155.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:35.657Z,1516704155.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:35.673Z,1516704155.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:36.060Z,1516704156.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:36.084Z,1516704156.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:36.467Z,1516704156.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:36.482Z,1516704156.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:36.863Z,1516704156.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:36.879Z,1516704156.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:37.245Z,1516704157.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:37.281Z,1516704157.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:40.344Z,1516704160.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:40.371Z,1516704160.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:40.476Z,1516704160.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:40.525Z,1516704160.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:40.830Z,1516704160.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:40.845Z,1516704160.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:41.235Z,1516704161.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:41.250Z,1516704161.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:41.630Z,1516704161.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:41.675Z,1516704161.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:42.020Z,1516704162.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:42.038Z,1516704162.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:42.421Z,1516704162.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:42.435Z,1516704162.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:42.821Z,1516704162.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:42.841Z,1516704162.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:43.220Z,1516704163.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:43.239Z,1516704163.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:43.621Z,1516704163.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:43.641Z,1516704163.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:44.030Z,1516704164.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:44.053Z,1516704164.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:44.431Z,1516704164.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:44.446Z,1516704164.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:44.831Z,1516704164.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:44.845Z,1516704164.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:45.224Z,1516704165.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:45.245Z,1516704165.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:45.623Z,1516704165.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:45.638Z,1516704165.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:46.021Z,1516704166.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:46.036Z,1516704166.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:46.420Z,1516704166.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:46.435Z,1516704166.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:46.828Z,1516704166.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:46.848Z,1516704166.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:47.230Z,1516704167.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:47.252Z,1516704167.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:47.629Z,1516704167.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:47.653Z,1516704167.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:48.024Z,1516704168.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:48.039Z,1516704168.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:48.421Z,1516704168.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:48.440Z,1516704168.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:48.824Z,1516704168.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:48.845Z,1516704168.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:49.219Z,1516704169.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:49.239Z,1516704169.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:49.621Z,1516704169.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:49.641Z,1516704169.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:50.034Z,1516704170.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:50.049Z,1516704170.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:50.434Z,1516704170.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:50.453Z,1516704170.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:50.835Z,1516704170.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:50.856Z,1516704170.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:51.229Z,1516704171.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:51.249Z,1516704171.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:51.625Z,1516704171.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:51.640Z,1516704171.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:52.022Z,1516704172.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:52.037Z,1516704172.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:52.425Z,1516704172.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:52.445Z,1516704172.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:52.831Z,1516704172.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:52.846Z,1516704172.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:53.235Z,1516704173.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:53.249Z,1516704173.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:53.634Z,1516704173.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:53.657Z,1516704173.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:54.020Z,1516704174.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:54.047Z,1516704174.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:54.413Z,1516704174.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:54.440Z,1516704174.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:54.832Z,1516704174.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:54.848Z,1516704174.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:55.236Z,1516704175.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:55.251Z,1516704175.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:55.630Z,1516704175.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:55.645Z,1516704175.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:56.013Z,1516704176.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:56.045Z,1516704176.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:56.420Z,1516704176.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:56.447Z,1516704176.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:56.823Z,1516704176.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:56.857Z,1516704176.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:57.239Z,1516704177.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:57.254Z,1516704177.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:57.623Z,1516704177.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:57.662Z,1516704177.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:58.013Z,1516704178.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:58.048Z,1516704178.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:58.410Z,1516704178.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:58.425Z,1516704178.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:58.840Z,1516704178.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:58.856Z,1516704178.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:59.227Z,1516704179.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:59.263Z,1516704179.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:42:59.623Z,1516704179.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:42:59.650Z,1516704179.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:00.014Z,1516704180.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:00.053Z,1516704180.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:00.417Z,1516704180.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:00.431Z,1516704180.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:00.824Z,1516704180.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:00.855Z,1516704180.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:01.236Z,1516704181.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:01.265Z,1516704181.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:01.632Z,1516704181.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:01.657Z,1516704181.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:02.018Z,1516704182.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:02.034Z,1516704182.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:02.418Z,1516704182.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:02.433Z,1516704182.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:02.830Z,1516704182.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:02.858Z,1516704182.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:03.223Z,1516704183.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:03.239Z,1516704183.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:03.628Z,1516704183.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:03.644Z,1516704183.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:04.022Z,1516704184.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:04.036Z,1516704184.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:04.421Z,1516704184.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:04.440Z,1516704184.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:04.824Z,1516704184.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:04.840Z,1516704184.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:05.228Z,1516704185.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:05.242Z,1516704185.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:05.624Z,1516704185.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:05.640Z,1516704185.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:06.026Z,1516704186.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:06.042Z,1516704186.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:06.421Z,1516704186.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:06.436Z,1516704186.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:06.825Z,1516704186.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:06.845Z,1516704186.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:07.227Z,1516704187.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:07.242Z,1516704187.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:07.638Z,1516704187.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:07.672Z,1516704187.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:08.024Z,1516704188.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:08.045Z,1516704188.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:08.424Z,1516704188.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:08.439Z,1516704188.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:08.826Z,1516704188.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:08.848Z,1516704188.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:09.227Z,1516704189.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:09.242Z,1516704189.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:09.626Z,1516704189.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:09.645Z,1516704189.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:10.022Z,1516704190.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:10.036Z,1516704190.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:10.417Z,1516704190.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:10.436Z,1516704190.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:10.839Z,1516704190.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:10.870Z,1516704190.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:11.231Z,1516704191.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:11.245Z,1516704191.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:11.628Z,1516704191.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:11.643Z,1516704191.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:12.020Z,1516704192.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:12.039Z,1516704192.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:12.425Z,1516704192.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:12.439Z,1516704192.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:12.840Z,1516704192.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:12.870Z,1516704192.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:13.227Z,1516704193.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:13.242Z,1516704193.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:13.626Z,1516704193.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:13.641Z,1516704193.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:14.026Z,1516704194.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:14.049Z,1516704194.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:14.425Z,1516704194.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:14.441Z,1516704194.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:14.826Z,1516704194.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:14.841Z,1516704194.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:15.226Z,1516704195.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:15.245Z,1516704195.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:15.627Z,1516704195.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:15.643Z,1516704195.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:16.026Z,1516704196.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:16.040Z,1516704196.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:16.420Z,1516704196.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:16.435Z,1516704196.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:16.825Z,1516704196.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:16.845Z,1516704196.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:17.228Z,1516704197.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:17.243Z,1516704197.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:17.628Z,1516704197.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:17.651Z,1516704197.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:18.019Z,1516704198.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:18.052Z,1516704198.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:18.412Z,1516704198.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:18.439Z,1516704198.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:18.832Z,1516704198.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:18.847Z,1516704198.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:19.235Z,1516704199.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:19.250Z,1516704199.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:19.638Z,1516704199.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:19.653Z,1516704199.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:20.013Z,1516704200.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:20.040Z,1516704200.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:20.414Z,1516704200.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:20.449Z,1516704200.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:20.840Z,1516704200.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:20.854Z,1516704200.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:21.233Z,1516704201.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:21.253Z,1516704201.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:21.631Z,1516704201.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:21.649Z,1516704201.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:22.016Z,1516704202.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:22.042Z,1516704202.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:22.412Z,1516704202.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:22.438Z,1516704202.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:22.839Z,1516704202.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:22.854Z,1516704202.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:23.240Z,1516704203.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:23.254Z,1516704203.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:23.625Z,1516704203.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:23.657Z,1516704203.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:24.014Z,1516704204.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:24.045Z,1516704204.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:24.421Z,1516704204.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:24.453Z,1516704204.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:24.814Z,1516704204.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:24.829Z,1516704204.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:25.225Z,1516704205.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:25.257Z,1516704205.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:25.635Z,1516704205.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:25.660Z,1516704205.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:26.027Z,1516704206.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:26.059Z,1516704206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:26.417Z,1516704206.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:26.433Z,1516704206.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:26.826Z,1516704206.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:26.841Z,1516704206.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:27.224Z,1516704207.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:27.261Z,1516704207.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:27.618Z,1516704207.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:27.641Z,1516704207.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:28.039Z,1516704208.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:28.054Z,1516704208.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:28.428Z,1516704208.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:28.449Z,1516704208.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:28.833Z,1516704208.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:28.853Z,1516704208.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:29.224Z,1516704209.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:29.238Z,1516704209.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:29.628Z,1516704209.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:29.649Z,1516704209.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:30.022Z,1516704210.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:30.039Z,1516704210.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:30.424Z,1516704210.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:30.449Z,1516704210.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:30.818Z,1516704210.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:30.845Z,1516704210.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:31.231Z,1516704211.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:31.247Z,1516704211.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:31.633Z,1516704211.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:31.648Z,1516704211.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:32.029Z,1516704212.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:32.048Z,1516704212.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:32.431Z,1516704212.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:32.446Z,1516704212.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:32.824Z,1516704212.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:32.839Z,1516704212.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:33.220Z,1516704213.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:33.244Z,1516704213.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:33.624Z,1516704213.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:33.647Z,1516704213.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:34.035Z,1516704214.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:34.049Z,1516704214.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:34.428Z,1516704214.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:34.455Z,1516704214.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:34.828Z,1516704214.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:34.857Z,1516704214.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:35.212Z,1516704215.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:35.245Z,1516704215.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:35.618Z,1516704215.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:35.626Z,1516704215.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x23189 got:0x46461 2018-01-23T10:43:35.663Z,1516704215.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:36.019Z,1516704216.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:36.050Z,1516704216.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:36.413Z,1516704216.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:36.457Z,1516704216.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:36.810Z,1516704216.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:36.829Z,1516704216.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:37.235Z,1516704217.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:37.265Z,1516704217.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:37.635Z,1516704217.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:37.658Z,1516704217.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:40.724Z,1516704220.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:40.755Z,1516704220.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:40.836Z,1516704220.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:40.871Z,1516704220.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:41.212Z,1516704221.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:41.239Z,1516704221.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:41.624Z,1516704221.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:41.662Z,1516704221.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:42.013Z,1516704222.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:42.038Z,1516704222.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:42.417Z,1516704222.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:42.441Z,1516704222.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:42.818Z,1516704222.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:42.860Z,1516704222.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:43.222Z,1516704223.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:43.242Z,1516704223.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:43.626Z,1516704223.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:43.643Z,1516704223.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:44.025Z,1516704224.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:44.045Z,1516704224.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:44.413Z,1516704224.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:44.461Z,1516704224.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:44.816Z,1516704224.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:44.832Z,1516704224.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:45.218Z,1516704225.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:45.236Z,1516704225.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:45.612Z,1516704225.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:45.642Z,1516704225.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:46.027Z,1516704226.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:46.068Z,1516704226.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:46.430Z,1516704226.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:46.448Z,1516704226.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:46.828Z,1516704226.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:46.845Z,1516704226.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:47.223Z,1516704227.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:47.239Z,1516704227.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:47.617Z,1516704227.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:47.645Z,1516704227.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:48.006Z,1516704228.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:48.033Z,1516704228.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:48.413Z,1516704228.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:48.439Z,1516704228.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:48.817Z,1516704228.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:48.836Z,1516704228.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:49.229Z,1516704229.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:49.272Z,1516704229.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:49.630Z,1516704229.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:49.649Z,1516704229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:50.028Z,1516704230.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:50.052Z,1516704230.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:50.406Z,1516704230.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:50.445Z,1516704230.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:50.808Z,1516704230.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:50.845Z,1516704230.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:51.209Z,1516704231.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:51.235Z,1516704231.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:51.608Z,1516704231.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:51.637Z,1516704231.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:52.028Z,1516704232.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:52.045Z,1516704232.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:52.431Z,1516704232.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:52.466Z,1516704232.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:52.831Z,1516704232.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:52.849Z,1516704232.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:53.208Z,1516704233.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:53.235Z,1516704233.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:53.608Z,1516704233.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:53.646Z,1516704233.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:54.006Z,1516704234.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:54.034Z,1516704234.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:54.409Z,1516704234.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:54.440Z,1516704234.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:54.808Z,1516704234.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:54.844Z,1516704234.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:55.228Z,1516704235.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:55.249Z,1516704235.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:55.629Z,1516704235.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:55.676Z,1516704235.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:56.028Z,1516704236.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:56.049Z,1516704236.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:56.407Z,1516704236.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:56.438Z,1516704236.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:56.812Z,1516704236.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:56.848Z,1516704236.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:57.209Z,1516704237.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:57.248Z,1516704237.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:57.608Z,1516704237.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:57.649Z,1516704237.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:58.027Z,1516704238.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:58.055Z,1516704238.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:58.427Z,1516704238.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:58.453Z,1516704238.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:58.820Z,1516704238.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:58.847Z,1516704238.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:59.220Z,1516704239.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:59.251Z,1516704239.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:59.620Z,1516704239.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:43:59.656Z,1516704239.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:59.658Z,1516704239.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:59.658Z,1516704239.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 149 2018-01-23T10:43:59.658Z,1516704239.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:43:59.660Z,1516704239.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:43:59.660Z,1516704239.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149 2018-01-23T10:43:59.660Z,1516704239.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:43:59.672Z,1516704239.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:43:59.672Z,1516704239.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:44:00.013Z,1516704240.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:00.033Z,1516704240.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:00.033Z,1516704240.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149 2018-01-23T10:44:00.033Z,1516704240.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:44:00.067Z,1516704240.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:44:00.068Z,1516704240.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:44:00.068Z,1516704240.068 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 149 2018-01-23T10:44:00.068Z,1516704240.068 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:44:00.068Z,1516704240.068 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149 2018-01-23T10:44:00.420Z,1516704240.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:00.440Z,1516704240.440 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:44:00.440Z,1516704240.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:44:00.441Z,1516704240.441 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:44:00.441Z,1516704240.441 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:44:00.441Z,1516704240.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:44:00.442Z,1516704240.442 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:44:00.487Z,1516704240.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:44:00.487Z,1516704240.487 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149 2018-01-23T10:44:00.817Z,1516704240.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:00.831Z,1516704240.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:44:00.831Z,1516704240.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:44:00.831Z,1516704240.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:44:01.222Z,1516704241.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:01.240Z,1516704241.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:44:01.241Z,1516704241.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:01.623Z,1516704241.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:01.640Z,1516704241.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:44:01.641Z,1516704241.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:02.022Z,1516704242.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:02.037Z,1516704242.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:44:02.037Z,1516704242.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:02.416Z,1516704242.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:02.431Z,1516704242.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:44:02.432Z,1516704242.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:02.812Z,1516704242.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:02.840Z,1516704242.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:44:02.841Z,1516704242.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:03.218Z,1516704243.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:03.240Z,1516704243.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:44:03.242Z,1516704243.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:03.613Z,1516704243.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:03.632Z,1516704243.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:44:03.632Z,1516704243.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:04.021Z,1516704244.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:04.040Z,1516704244.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:44:04.041Z,1516704244.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:04.426Z,1516704244.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:04.448Z,1516704244.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:44:04.449Z,1516704244.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:04.826Z,1516704244.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:04.840Z,1516704244.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:44:04.842Z,1516704244.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:05.216Z,1516704245.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:05.230Z,1516704245.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:44:05.232Z,1516704245.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:05.617Z,1516704245.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:05.631Z,1516704245.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:44:05.632Z,1516704245.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:06.012Z,1516704246.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:06.034Z,1516704246.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:44:06.035Z,1516704246.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:06.412Z,1516704246.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:06.434Z,1516704246.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:44:06.439Z,1516704246.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:06.818Z,1516704246.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:06.840Z,1516704246.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:44:06.841Z,1516704246.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:07.226Z,1516704247.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:07.241Z,1516704247.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:44:07.242Z,1516704247.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:07.631Z,1516704247.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:07.646Z,1516704247.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:44:07.647Z,1516704247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:08.027Z,1516704248.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:08.041Z,1516704248.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:44:08.043Z,1516704248.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:08.412Z,1516704248.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:08.437Z,1516704248.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:44:08.438Z,1516704248.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:08.811Z,1516704248.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:08.842Z,1516704248.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:44:08.843Z,1516704248.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:09.218Z,1516704249.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:09.232Z,1516704249.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:44:09.233Z,1516704249.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:09.613Z,1516704249.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:09.635Z,1516704249.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:44:09.636Z,1516704249.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:10.026Z,1516704250.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:10.041Z,1516704250.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:44:10.042Z,1516704250.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:10.431Z,1516704250.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:10.452Z,1516704250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:44:10.453Z,1516704250.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:10.831Z,1516704250.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:10.846Z,1516704250.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:44:10.847Z,1516704250.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:11.212Z,1516704251.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:11.242Z,1516704251.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:44:11.247Z,1516704251.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:11.613Z,1516704251.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:11.640Z,1516704251.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:44:11.650Z,1516704251.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:12.006Z,1516704252.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:12.044Z,1516704252.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:44:12.045Z,1516704252.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:12.409Z,1516704252.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:12.436Z,1516704252.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:44:12.437Z,1516704252.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:12.812Z,1516704252.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:12.846Z,1516704252.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:44:12.847Z,1516704252.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:13.219Z,1516704253.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:13.249Z,1516704253.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:44:13.249Z,1516704253.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:13.627Z,1516704253.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:13.650Z,1516704253.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:44:13.651Z,1516704253.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:14.018Z,1516704254.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:14.048Z,1516704254.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:44:14.049Z,1516704254.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:14.406Z,1516704254.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:14.421Z,1516704254.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:44:14.422Z,1516704254.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:14.808Z,1516704254.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:14.844Z,1516704254.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:44:14.845Z,1516704254.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:15.209Z,1516704255.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:15.228Z,1516704255.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:44:15.229Z,1516704255.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:15.606Z,1516704255.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:15.621Z,1516704255.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:44:15.622Z,1516704255.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:16.031Z,1516704256.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:16.061Z,1516704256.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:44:16.064Z,1516704256.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:16.431Z,1516704256.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:16.453Z,1516704256.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:44:16.454Z,1516704256.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:16.831Z,1516704256.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:16.853Z,1516704256.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:44:16.854Z,1516704256.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:17.220Z,1516704257.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:17.254Z,1516704257.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:44:17.255Z,1516704257.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:17.614Z,1516704257.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:17.628Z,1516704257.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:44:17.629Z,1516704257.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:18.013Z,1516704258.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:18.032Z,1516704258.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:44:18.033Z,1516704258.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:18.421Z,1516704258.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:18.436Z,1516704258.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:44:18.437Z,1516704258.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:18.818Z,1516704258.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:18.832Z,1516704258.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:44:18.833Z,1516704258.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:19.220Z,1516704259.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:19.235Z,1516704259.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:44:19.236Z,1516704259.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:19.624Z,1516704259.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:19.645Z,1516704259.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:44:19.646Z,1516704259.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:20.027Z,1516704260.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:20.042Z,1516704260.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:20.409Z,1516704260.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:20.445Z,1516704260.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:20.822Z,1516704260.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:20.837Z,1516704260.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:21.219Z,1516704261.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:21.234Z,1516704261.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:21.612Z,1516704261.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:21.644Z,1516704261.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:22.028Z,1516704262.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:22.049Z,1516704262.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:22.430Z,1516704262.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:22.445Z,1516704262.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:22.827Z,1516704262.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:22.843Z,1516704262.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:23.216Z,1516704263.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:23.237Z,1516704263.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:23.617Z,1516704263.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:23.633Z,1516704263.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:24.006Z,1516704264.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:24.038Z,1516704264.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:24.064Z,1516704264.064 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:44:24.409Z,1516704264.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:24.441Z,1516704264.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:24.808Z,1516704264.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:24.844Z,1516704264.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:25.224Z,1516704265.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:25.256Z,1516704265.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:25.623Z,1516704265.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:25.661Z,1516704265.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:26.026Z,1516704266.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:26.056Z,1516704266.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:26.414Z,1516704266.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:26.429Z,1516704266.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:26.813Z,1516704266.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:26.833Z,1516704266.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:27.214Z,1516704267.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:27.240Z,1516704267.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:27.610Z,1516704267.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:27.634Z,1516704267.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:28.023Z,1516704268.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:28.061Z,1516704268.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:28.431Z,1516704268.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:28.446Z,1516704268.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:28.820Z,1516704268.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:28.834Z,1516704268.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:29.215Z,1516704269.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:29.230Z,1516704269.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:29.615Z,1516704269.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:29.630Z,1516704269.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:30.014Z,1516704270.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:30.037Z,1516704270.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:30.414Z,1516704270.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:30.442Z,1516704270.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:30.817Z,1516704270.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:30.832Z,1516704270.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:31.219Z,1516704271.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:31.235Z,1516704271.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:31.623Z,1516704271.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:31.638Z,1516704271.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:32.019Z,1516704272.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:32.040Z,1516704272.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:32.414Z,1516704272.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:32.429Z,1516704272.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:32.814Z,1516704272.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:32.837Z,1516704272.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:33.217Z,1516704273.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:33.231Z,1516704273.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:33.613Z,1516704273.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:33.628Z,1516704273.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:34.019Z,1516704274.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:34.034Z,1516704274.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:34.423Z,1516704274.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:34.437Z,1516704274.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:34.819Z,1516704274.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:34.834Z,1516704274.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:35.215Z,1516704275.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:35.230Z,1516704275.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:35.616Z,1516704275.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:35.630Z,1516704275.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:36.012Z,1516704276.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:36.031Z,1516704276.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:36.418Z,1516704276.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:36.437Z,1516704276.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:36.815Z,1516704276.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:36.836Z,1516704276.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:37.220Z,1516704277.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:37.235Z,1516704277.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:37.623Z,1516704277.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:37.638Z,1516704277.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:38.020Z,1516704278.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:38.035Z,1516704278.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:41.112Z,1516704281.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:41.127Z,1516704281.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:41.233Z,1516704281.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:41.269Z,1516704281.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:41.591Z,1516704281.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:41.621Z,1516704281.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:42.003Z,1516704282.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:42.018Z,1516704282.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:42.384Z,1516704282.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:42.419Z,1516704282.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:42.774Z,1516704282.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:42.793Z,1516704282.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:43.177Z,1516704283.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:43.192Z,1516704283.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:43.574Z,1516704283.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:43.589Z,1516704283.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:43.991Z,1516704283.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:44.018Z,1516704284.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:44.387Z,1516704284.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:44.402Z,1516704284.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:44.784Z,1516704284.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:44.799Z,1516704284.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:45.178Z,1516704285.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:45.193Z,1516704285.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:45.578Z,1516704285.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:45.593Z,1516704285.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:45.981Z,1516704285.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:46.008Z,1516704286.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:46.388Z,1516704286.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:46.409Z,1516704286.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:46.787Z,1516704286.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:46.801Z,1516704286.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:47.182Z,1516704287.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:47.197Z,1516704287.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:47.574Z,1516704287.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:47.601Z,1516704287.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:47.987Z,1516704287.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:48.002Z,1516704288.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:48.386Z,1516704288.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:48.401Z,1516704288.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:48.787Z,1516704288.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:48.802Z,1516704288.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:49.177Z,1516704289.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:49.201Z,1516704289.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:49.572Z,1516704289.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:49.593Z,1516704289.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:49.982Z,1516704289.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:50.005Z,1516704290.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:50.391Z,1516704290.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:50.405Z,1516704290.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:50.792Z,1516704290.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:50.807Z,1516704290.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:51.173Z,1516704291.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:51.208Z,1516704291.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:51.576Z,1516704291.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:51.601Z,1516704291.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:51.987Z,1516704291.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:52.010Z,1516704292.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:52.394Z,1516704292.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:52.409Z,1516704292.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:52.795Z,1516704292.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:52.810Z,1516704292.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:53.170Z,1516704293.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:53.202Z,1516704293.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:53.569Z,1516704293.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:53.596Z,1516704293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:53.988Z,1516704293.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:54.015Z,1516704294.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:54.384Z,1516704294.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:54.415Z,1516704294.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:54.784Z,1516704294.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:54.811Z,1516704294.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:55.169Z,1516704295.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:55.189Z,1516704295.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:55.567Z,1516704295.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:55.583Z,1516704295.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:55.996Z,1516704295.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:56.021Z,1516704296.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:56.396Z,1516704296.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:56.422Z,1516704296.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:56.784Z,1516704296.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:56.816Z,1516704296.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:57.175Z,1516704297.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:57.203Z,1516704297.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:57.577Z,1516704297.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:57.592Z,1516704297.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:57.980Z,1516704297.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:57.996Z,1516704297.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:58.384Z,1516704298.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:58.399Z,1516704298.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:58.780Z,1516704298.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:58.800Z,1516704298.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:59.177Z,1516704299.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:59.197Z,1516704299.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:59.574Z,1516704299.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:44:59.598Z,1516704299.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:44:59.986Z,1516704299.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:00.002Z,1516704300.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:00.383Z,1516704300.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:00.412Z,1516704300.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:00.790Z,1516704300.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:00.806Z,1516704300.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:01.178Z,1516704301.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:01.193Z,1516704301.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:01.566Z,1516704301.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:01.594Z,1516704301.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:01.988Z,1516704301.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:02.003Z,1516704302.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:02.391Z,1516704302.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:02.406Z,1516704302.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:02.787Z,1516704302.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:02.802Z,1516704302.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:03.169Z,1516704303.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:03.201Z,1516704303.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:03.568Z,1516704303.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:03.603Z,1516704303.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:03.984Z,1516704303.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:04.011Z,1516704304.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:04.391Z,1516704304.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:04.406Z,1516704304.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:04.782Z,1516704304.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:04.809Z,1516704304.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:05.169Z,1516704305.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:05.195Z,1516704305.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:05.569Z,1516704305.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:05.604Z,1516704305.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:05.968Z,1516704305.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:05.995Z,1516704305.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:06.387Z,1516704306.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:06.408Z,1516704306.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:06.788Z,1516704306.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:06.815Z,1516704306.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:07.178Z,1516704307.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:07.204Z,1516704307.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:07.566Z,1516704307.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:07.581Z,1516704307.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:07.968Z,1516704307.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:08.009Z,1516704308.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:08.373Z,1516704308.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:08.388Z,1516704308.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:08.766Z,1516704308.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:08.781Z,1516704308.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:09.198Z,1516704309.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:09.213Z,1516704309.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:09.587Z,1516704309.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:09.610Z,1516704309.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:09.984Z,1516704309.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:10.008Z,1516704310.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:10.380Z,1516704310.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:10.410Z,1516704310.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:10.773Z,1516704310.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:10.789Z,1516704310.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:11.170Z,1516704311.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:11.185Z,1516704311.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:11.581Z,1516704311.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:11.612Z,1516704311.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:11.976Z,1516704311.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:11.991Z,1516704311.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:12.379Z,1516704312.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:12.417Z,1516704312.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:12.791Z,1516704312.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:12.822Z,1516704312.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:13.183Z,1516704313.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:13.198Z,1516704313.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:13.572Z,1516704313.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:13.591Z,1516704313.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:13.973Z,1516704313.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:13.992Z,1516704313.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:14.377Z,1516704314.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:14.391Z,1516704314.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:14.774Z,1516704314.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:14.797Z,1516704314.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:15.179Z,1516704315.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:15.195Z,1516704315.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:15.583Z,1516704315.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:15.598Z,1516704315.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:15.980Z,1516704315.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:15.995Z,1516704315.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:16.374Z,1516704316.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:16.397Z,1516704316.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:16.777Z,1516704316.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:16.792Z,1516704316.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:17.173Z,1516704317.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:17.193Z,1516704317.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:17.572Z,1516704317.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:17.594Z,1516704317.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:17.972Z,1516704317.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:18.004Z,1516704318.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:18.387Z,1516704318.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:18.402Z,1516704318.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:18.790Z,1516704318.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:18.805Z,1516704318.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:19.188Z,1516704319.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:19.203Z,1516704319.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:19.566Z,1516704319.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:19.594Z,1516704319.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:19.975Z,1516704319.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:19.997Z,1516704319.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:20.370Z,1516704320.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:20.409Z,1516704320.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:20.772Z,1516704320.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:20.799Z,1516704320.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:21.187Z,1516704321.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:21.202Z,1516704321.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:21.590Z,1516704321.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:21.613Z,1516704321.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:21.988Z,1516704321.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:22.002Z,1516704322.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:22.369Z,1516704322.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:22.392Z,1516704322.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:22.769Z,1516704322.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:22.807Z,1516704322.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:23.169Z,1516704323.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:23.193Z,1516704323.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:23.570Z,1516704323.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:23.585Z,1516704323.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:23.969Z,1516704323.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:23.989Z,1516704323.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:24.387Z,1516704324.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:24.412Z,1516704324.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:24.803Z,1516704324.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:24.818Z,1516704324.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:25.191Z,1516704325.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:25.217Z,1516704325.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:25.573Z,1516704325.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:25.589Z,1516704325.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:25.976Z,1516704325.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:26.010Z,1516704326.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:26.382Z,1516704326.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:26.399Z,1516704326.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:26.772Z,1516704326.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:26.795Z,1516704326.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:27.186Z,1516704327.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:27.202Z,1516704327.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:27.591Z,1516704327.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:27.613Z,1516704327.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:27.987Z,1516704327.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:28.002Z,1516704328.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:28.372Z,1516704328.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:28.394Z,1516704328.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:28.772Z,1516704328.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:28.804Z,1516704328.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:29.172Z,1516704329.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:29.195Z,1516704329.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:29.573Z,1516704329.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:29.596Z,1516704329.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:29.972Z,1516704329.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:30.004Z,1516704330.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:30.387Z,1516704330.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:30.402Z,1516704330.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:30.791Z,1516704330.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:30.813Z,1516704330.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:31.188Z,1516704331.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:31.203Z,1516704331.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:31.572Z,1516704331.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:31.595Z,1516704331.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:31.990Z,1516704331.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:32.009Z,1516704332.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:32.384Z,1516704332.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:32.399Z,1516704332.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:32.773Z,1516704332.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:32.797Z,1516704332.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:33.187Z,1516704333.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:33.210Z,1516704333.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:33.596Z,1516704333.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:33.611Z,1516704333.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:33.989Z,1516704333.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:34.009Z,1516704334.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:34.387Z,1516704334.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:34.402Z,1516704334.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:34.769Z,1516704334.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:34.808Z,1516704334.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:35.169Z,1516704335.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:35.201Z,1516704335.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:35.570Z,1516704335.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:35.598Z,1516704335.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:35.969Z,1516704335.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:36.009Z,1516704336.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:36.393Z,1516704336.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:36.417Z,1516704336.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:36.420Z,1516704336.420 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T10:40:36.3Z 2018-01-23T10:45:36.420Z,1516704336.420 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:45:36.420Z,1516704336.420 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:45:36.792Z,1516704336.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:36.813Z,1516704336.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:37.310Z,1516704337.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:37.333Z,1516704337.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:37.573Z,1516704337.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:37.605Z,1516704337.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:40.672Z,1516704340.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:40.687Z,1516704340.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:40.767Z,1516704340.767 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0176.lzma 2018-01-23T10:45:40.787Z,1516704340.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:40.833Z,1516704340.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:41.179Z,1516704341.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:41.212Z,1516704341.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:41.548Z,1516704341.548 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0176.lzma.bak 2018-01-23T10:45:41.549Z,1516704341.549 [DataOverHttps](INFO): SBD MOMSN=7755447 2018-01-23T10:45:41.607Z,1516704341.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:41.621Z,1516704341.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:42.228Z,1516704342.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:42.257Z,1516704342.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:42.369Z,1516704342.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:42.416Z,1516704342.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:45.483Z,1516704345.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:45.508Z,1516704345.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:45.609Z,1516704345.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:45.654Z,1516704345.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:45.962Z,1516704345.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:45.981Z,1516704345.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:46.375Z,1516704346.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:46.412Z,1516704346.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:46.763Z,1516704346.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:46.778Z,1516704346.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:47.157Z,1516704347.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:47.177Z,1516704347.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:50.266Z,1516704350.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:50.281Z,1516704350.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:50.355Z,1516704350.355 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0177.lzma 2018-01-23T10:45:50.376Z,1516704350.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:50.420Z,1516704350.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:50.783Z,1516704350.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:50.808Z,1516704350.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:51.148Z,1516704351.148 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0177.lzma.bak 2018-01-23T10:45:51.149Z,1516704351.149 [DataOverHttps](INFO): SBD MOMSN=7755449 2018-01-23T10:45:51.183Z,1516704351.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:51.217Z,1516704351.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:51.812Z,1516704351.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:51.831Z,1516704351.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:51.834Z,1516704351.834 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:45:51.834Z,1516704351.834 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:45:51.834Z,1516704351.834 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:45:51.966Z,1516704351.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:51.984Z,1516704351.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:55.068Z,1516704355.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:55.083Z,1516704355.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:55.181Z,1516704355.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:55.224Z,1516704355.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:55.554Z,1516704355.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:55.569Z,1516704355.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:55.963Z,1516704355.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:55.977Z,1516704355.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:56.339Z,1516704356.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:56.363Z,1516704356.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:56.738Z,1516704356.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:56.753Z,1516704356.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:57.131Z,1516704357.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:57.146Z,1516704357.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:57.527Z,1516704357.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:57.542Z,1516704357.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:57.926Z,1516704357.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:57.941Z,1516704357.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:58.343Z,1516704358.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:58.382Z,1516704358.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:58.757Z,1516704358.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:58.781Z,1516704358.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:59.145Z,1516704359.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:59.161Z,1516704359.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:59.533Z,1516704359.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:59.560Z,1516704359.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:45:59.927Z,1516704359.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:45:59.955Z,1516704359.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:00.332Z,1516704360.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:00.353Z,1516704360.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:00.731Z,1516704360.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:00.765Z,1516704360.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:01.138Z,1516704361.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:01.176Z,1516704361.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:01.545Z,1516704361.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:01.585Z,1516704361.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:01.936Z,1516704361.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:01.984Z,1516704361.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:02.328Z,1516704362.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:02.375Z,1516704362.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:02.728Z,1516704362.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:02.755Z,1516704362.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:03.130Z,1516704363.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:03.203Z,1516704363.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:03.527Z,1516704363.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:03.563Z,1516704363.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:03.956Z,1516704363.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:03.983Z,1516704363.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:04.341Z,1516704364.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:04.411Z,1516704364.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:04.745Z,1516704364.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:04.776Z,1516704364.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:05.142Z,1516704365.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:05.175Z,1516704365.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:05.542Z,1516704365.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:05.579Z,1516704365.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:05.931Z,1516704365.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:05.954Z,1516704365.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:06.349Z,1516704366.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:06.391Z,1516704366.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:06.767Z,1516704366.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:06.852Z,1516704366.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:07.108Z,1516704367.108 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:46:07.108Z,1516704367.108 [NAL9602] Data Fault, FailCount= 1 2018-01-23T10:46:07.108Z,1516704367.108 [NAL9602](ERROR): Data Fault 2018-01-23T10:46:07.149Z,1516704367.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:07.190Z,1516704367.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:07.255Z,1516704367.255 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:46:07.524Z,1516704367.524 [NAL9602](INFO): Powering down 2018-01-23T10:46:07.544Z,1516704367.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:07.646Z,1516704367.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:07.930Z,1516704367.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:07.999Z,1516704367.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:08.326Z,1516704368.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:08.366Z,1516704368.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:08.411Z,1516704368.411 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:46:08.411Z,1516704368.411 [NAL9602] No Fault, FailCount= 1 2018-01-23T10:46:08.730Z,1516704368.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:08.766Z,1516704368.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:09.130Z,1516704369.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:09.201Z,1516704369.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:09.530Z,1516704369.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:09.577Z,1516704369.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:09.929Z,1516704369.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:09.968Z,1516704369.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:10.331Z,1516704370.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:10.376Z,1516704370.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:10.731Z,1516704370.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:10.774Z,1516704370.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:11.131Z,1516704371.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:11.185Z,1516704371.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:11.530Z,1516704371.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:11.600Z,1516704371.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:11.931Z,1516704371.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:11.979Z,1516704371.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:12.334Z,1516704372.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:12.396Z,1516704372.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:12.739Z,1516704372.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:12.795Z,1516704372.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:13.138Z,1516704373.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:13.161Z,1516704373.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:13.539Z,1516704373.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:13.567Z,1516704373.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:13.936Z,1516704373.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:13.951Z,1516704373.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:14.321Z,1516704374.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:14.348Z,1516704374.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:14.731Z,1516704374.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:14.757Z,1516704374.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:15.132Z,1516704375.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:15.147Z,1516704375.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:15.532Z,1516704375.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:15.547Z,1516704375.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:15.931Z,1516704375.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:15.957Z,1516704375.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:16.332Z,1516704376.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:16.357Z,1516704376.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:16.732Z,1516704376.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:16.747Z,1516704376.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:17.131Z,1516704377.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:17.157Z,1516704377.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:17.532Z,1516704377.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:17.546Z,1516704377.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:17.940Z,1516704377.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:17.955Z,1516704377.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:18.332Z,1516704378.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:18.352Z,1516704378.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:18.736Z,1516704378.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:18.751Z,1516704378.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:19.121Z,1516704379.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:19.148Z,1516704379.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:19.531Z,1516704379.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:19.550Z,1516704379.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:19.932Z,1516704379.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:19.961Z,1516704379.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:20.321Z,1516704380.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:20.348Z,1516704380.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:20.731Z,1516704380.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:20.756Z,1516704380.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:21.136Z,1516704381.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:21.151Z,1516704381.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:21.521Z,1516704381.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:21.548Z,1516704381.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:21.931Z,1516704381.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:21.957Z,1516704381.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:22.331Z,1516704382.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:22.346Z,1516704382.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:22.736Z,1516704382.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:22.751Z,1516704382.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:23.132Z,1516704383.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:23.152Z,1516704383.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:23.537Z,1516704383.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:23.551Z,1516704383.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:23.936Z,1516704383.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:23.951Z,1516704383.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:24.332Z,1516704384.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:24.352Z,1516704384.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:24.736Z,1516704384.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:24.751Z,1516704384.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:25.121Z,1516704385.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:25.148Z,1516704385.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:25.531Z,1516704385.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:25.557Z,1516704385.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:25.932Z,1516704385.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:25.947Z,1516704385.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:26.333Z,1516704386.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:26.349Z,1516704386.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:26.743Z,1516704386.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:26.757Z,1516704386.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:27.136Z,1516704387.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:27.151Z,1516704387.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:27.522Z,1516704387.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:27.560Z,1516704387.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:27.940Z,1516704387.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:27.955Z,1516704387.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:28.332Z,1516704388.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:28.347Z,1516704388.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:28.732Z,1516704388.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:28.747Z,1516704388.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:29.132Z,1516704389.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:29.152Z,1516704389.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:29.540Z,1516704389.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:29.554Z,1516704389.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:29.936Z,1516704389.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:29.951Z,1516704389.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:30.332Z,1516704390.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:30.352Z,1516704390.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:30.736Z,1516704390.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:30.751Z,1516704390.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:31.134Z,1516704391.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:31.149Z,1516704391.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:31.532Z,1516704391.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:31.552Z,1516704391.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:31.937Z,1516704391.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:31.957Z,1516704391.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:32.336Z,1516704392.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:32.351Z,1516704392.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:32.736Z,1516704392.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:32.756Z,1516704392.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:33.140Z,1516704393.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:33.156Z,1516704393.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:33.521Z,1516704393.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:33.549Z,1516704393.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:33.924Z,1516704393.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:33.950Z,1516704393.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:34.326Z,1516704394.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:34.356Z,1516704394.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:34.740Z,1516704394.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:34.755Z,1516704394.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:35.124Z,1516704395.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:35.158Z,1516704395.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:35.523Z,1516704395.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:35.557Z,1516704395.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:35.926Z,1516704395.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:35.950Z,1516704395.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:36.340Z,1516704396.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:36.354Z,1516704396.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:36.740Z,1516704396.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:36.761Z,1516704396.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:37.124Z,1516704397.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:37.160Z,1516704397.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:37.526Z,1516704397.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:37.571Z,1516704397.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:37.916Z,1516704397.916 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:46:37.933Z,1516704397.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:37.965Z,1516704397.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:38.333Z,1516704398.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:38.349Z,1516704398.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:38.729Z,1516704398.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:38.744Z,1516704398.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:39.137Z,1516704399.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:39.152Z,1516704399.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:39.536Z,1516704399.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:39.551Z,1516704399.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:39.934Z,1516704399.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:40.032Z,1516704400.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:40.333Z,1516704400.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:40.349Z,1516704400.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:40.735Z,1516704400.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:40.750Z,1516704400.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:41.133Z,1516704401.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:41.153Z,1516704401.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:41.533Z,1516704401.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:41.549Z,1516704401.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:41.931Z,1516704401.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:41.947Z,1516704401.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:42.333Z,1516704402.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:42.361Z,1516704402.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:42.795Z,1516704402.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:42.840Z,1516704402.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:43.126Z,1516704403.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:43.153Z,1516704403.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:43.524Z,1516704403.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:43.551Z,1516704403.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:43.926Z,1516704403.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:43.956Z,1516704403.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:44.326Z,1516704404.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:44.357Z,1516704404.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:44.755Z,1516704404.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:44.851Z,1516704404.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:45.123Z,1516704405.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:45.150Z,1516704405.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:45.526Z,1516704405.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:45.559Z,1516704405.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:45.931Z,1516704405.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:45.958Z,1516704405.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:46.329Z,1516704406.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:46.365Z,1516704406.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:46.733Z,1516704406.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:46.764Z,1516704406.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:47.126Z,1516704407.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:47.143Z,1516704407.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:47.530Z,1516704407.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:47.545Z,1516704407.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:47.940Z,1516704407.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:47.975Z,1516704407.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:48.348Z,1516704408.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:48.381Z,1516704408.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:48.713Z,1516704408.713 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:46:48.732Z,1516704408.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:48.749Z,1516704408.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:49.135Z,1516704409.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:49.151Z,1516704409.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:49.540Z,1516704409.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:49.555Z,1516704409.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:49.948Z,1516704409.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:49.977Z,1516704409.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:50.340Z,1516704410.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:50.354Z,1516704410.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:50.737Z,1516704410.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:50.752Z,1516704410.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:51.130Z,1516704411.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:51.158Z,1516704411.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:51.540Z,1516704411.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:51.556Z,1516704411.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:51.945Z,1516704411.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:51.960Z,1516704411.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:52.345Z,1516704412.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:52.362Z,1516704412.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:55.440Z,1516704415.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:55.455Z,1516704415.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:55.562Z,1516704415.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:55.594Z,1516704415.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:55.903Z,1516704415.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:55.944Z,1516704415.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:56.305Z,1516704416.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:56.324Z,1516704416.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:56.702Z,1516704416.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:56.721Z,1516704416.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:57.102Z,1516704417.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:57.127Z,1516704417.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:57.505Z,1516704417.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:57.520Z,1516704417.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:57.912Z,1516704417.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:57.930Z,1516704417.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:58.319Z,1516704418.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:58.357Z,1516704418.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:58.707Z,1516704418.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:58.728Z,1516704418.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:59.102Z,1516704419.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:59.121Z,1516704419.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:59.502Z,1516704419.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:59.535Z,1516704419.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:46:59.910Z,1516704419.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:46:59.924Z,1516704419.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:00.300Z,1516704420.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:00.320Z,1516704420.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:00.714Z,1516704420.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:00.733Z,1516704420.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:00.735Z,1516704420.735 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:00.736Z,1516704420.736 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 150 2018-01-23T10:47:00.736Z,1516704420.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:47:00.737Z,1516704420.737 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:00.737Z,1516704420.737 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150 2018-01-23T10:47:00.738Z,1516704420.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:47:00.762Z,1516704420.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:47:00.762Z,1516704420.762 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:47:01.120Z,1516704421.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:01.140Z,1516704421.140 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:01.141Z,1516704421.141 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150 2018-01-23T10:47:01.141Z,1516704421.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:47:01.180Z,1516704421.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:47:01.180Z,1516704421.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:47:01.180Z,1516704421.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 150 2018-01-23T10:47:01.181Z,1516704421.181 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:47:01.181Z,1516704421.181 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150 2018-01-23T10:47:01.515Z,1516704421.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:01.550Z,1516704421.550 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:47:01.550Z,1516704421.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:47:01.567Z,1516704421.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:47:01.567Z,1516704421.567 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:47:01.568Z,1516704421.568 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:47:01.568Z,1516704421.568 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:47:01.592Z,1516704421.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:47:01.592Z,1516704421.592 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150 2018-01-23T10:47:01.896Z,1516704421.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:01.928Z,1516704421.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:47:01.929Z,1516704421.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:47:01.929Z,1516704421.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:47:02.296Z,1516704422.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:02.337Z,1516704422.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:47:02.338Z,1516704422.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:02.696Z,1516704422.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:02.734Z,1516704422.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:47:02.739Z,1516704422.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:03.101Z,1516704423.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:03.132Z,1516704423.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:47:03.133Z,1516704423.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:03.500Z,1516704423.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:03.514Z,1516704423.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:47:03.542Z,1516704423.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:03.911Z,1516704423.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:03.941Z,1516704423.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:47:03.942Z,1516704423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:04.329Z,1516704424.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:04.344Z,1516704424.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:47:04.345Z,1516704424.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:04.707Z,1516704424.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:04.740Z,1516704424.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:47:04.741Z,1516704424.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:05.094Z,1516704425.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:05.109Z,1516704425.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:47:05.110Z,1516704425.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:05.496Z,1516704425.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:05.516Z,1516704425.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:47:05.517Z,1516704425.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:05.909Z,1516704425.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:05.951Z,1516704425.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:47:05.952Z,1516704425.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:06.295Z,1516704426.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:06.316Z,1516704426.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:47:06.317Z,1516704426.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:06.744Z,1516704426.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:06.762Z,1516704426.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:47:06.763Z,1516704426.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:07.123Z,1516704427.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:07.164Z,1516704427.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:47:07.165Z,1516704427.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:07.511Z,1516704427.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:07.551Z,1516704427.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:47:07.552Z,1516704427.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:07.908Z,1516704427.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:07.944Z,1516704427.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:47:07.945Z,1516704427.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:08.306Z,1516704428.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:08.324Z,1516704428.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:47:08.325Z,1516704428.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:08.704Z,1516704428.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:08.718Z,1516704428.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:47:08.719Z,1516704428.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:09.100Z,1516704429.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:09.118Z,1516704429.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:47:09.124Z,1516704429.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:09.505Z,1516704429.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:09.520Z,1516704429.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:47:09.521Z,1516704429.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:09.910Z,1516704429.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:09.928Z,1516704429.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:47:09.929Z,1516704429.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:10.313Z,1516704430.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:10.332Z,1516704430.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:47:10.333Z,1516704430.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:10.715Z,1516704430.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:10.730Z,1516704430.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:47:10.732Z,1516704430.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:11.100Z,1516704431.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:11.122Z,1516704431.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:47:11.123Z,1516704431.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:11.499Z,1516704431.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:11.531Z,1516704431.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:47:11.532Z,1516704431.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:11.904Z,1516704431.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:11.924Z,1516704431.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:47:11.925Z,1516704431.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:12.294Z,1516704432.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:12.329Z,1516704432.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:47:12.330Z,1516704432.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:12.718Z,1516704432.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:12.733Z,1516704432.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:47:12.734Z,1516704432.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:13.120Z,1516704433.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:13.134Z,1516704433.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:47:13.135Z,1516704433.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:13.512Z,1516704433.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:13.532Z,1516704433.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:47:13.533Z,1516704433.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:13.896Z,1516704433.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:13.929Z,1516704433.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:47:13.930Z,1516704433.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:14.314Z,1516704434.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:14.332Z,1516704434.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:47:14.333Z,1516704434.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:14.697Z,1516704434.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:14.729Z,1516704434.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:47:14.729Z,1516704434.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:15.097Z,1516704435.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:15.132Z,1516704435.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:47:15.133Z,1516704435.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:15.514Z,1516704435.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:15.529Z,1516704435.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:47:15.530Z,1516704435.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:15.912Z,1516704435.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:15.943Z,1516704435.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:47:15.944Z,1516704435.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:16.319Z,1516704436.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:16.340Z,1516704436.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:47:16.341Z,1516704436.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:16.712Z,1516704436.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:16.734Z,1516704436.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:47:16.735Z,1516704436.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:17.101Z,1516704437.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:17.120Z,1516704437.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:47:17.121Z,1516704437.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:17.510Z,1516704437.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:17.525Z,1516704437.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:47:17.526Z,1516704437.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:17.901Z,1516704437.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:17.933Z,1516704437.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:47:17.934Z,1516704437.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:18.309Z,1516704438.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:18.323Z,1516704438.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:47:18.324Z,1516704438.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:18.709Z,1516704438.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:18.732Z,1516704438.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:47:18.733Z,1516704438.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:19.114Z,1516704439.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:19.129Z,1516704439.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:47:19.130Z,1516704439.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:19.515Z,1516704439.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:19.530Z,1516704439.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:47:19.531Z,1516704439.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:19.900Z,1516704439.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:19.936Z,1516704439.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:47:19.937Z,1516704439.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:20.306Z,1516704440.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:20.320Z,1516704440.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:47:20.321Z,1516704440.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:20.699Z,1516704440.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:20.732Z,1516704440.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:47:20.733Z,1516704440.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:21.103Z,1516704441.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:21.124Z,1516704441.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:47:21.125Z,1516704441.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:21.500Z,1516704441.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:21.533Z,1516704441.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:21.916Z,1516704441.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:21.930Z,1516704441.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:22.320Z,1516704442.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:22.341Z,1516704442.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:22.724Z,1516704442.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:22.738Z,1516704442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:23.097Z,1516704443.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:23.133Z,1516704443.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:23.515Z,1516704443.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:23.530Z,1516704443.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:23.902Z,1516704443.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:23.938Z,1516704443.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:24.314Z,1516704444.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:24.329Z,1516704444.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:24.722Z,1516704444.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:24.737Z,1516704444.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:25.121Z,1516704445.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:25.136Z,1516704445.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:25.512Z,1516704445.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:25.535Z,1516704445.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:25.897Z,1516704445.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:25.933Z,1516704445.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:26.301Z,1516704446.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:26.329Z,1516704446.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:26.696Z,1516704446.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:26.734Z,1516704446.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:27.097Z,1516704447.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:27.133Z,1516704447.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:27.500Z,1516704447.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:27.528Z,1516704447.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:27.917Z,1516704447.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:27.932Z,1516704447.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:28.318Z,1516704448.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:28.345Z,1516704448.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:28.706Z,1516704448.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:28.745Z,1516704448.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:29.100Z,1516704449.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:29.141Z,1516704449.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:29.501Z,1516704449.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:29.516Z,1516704449.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:29.909Z,1516704449.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:29.923Z,1516704449.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:30.305Z,1516704450.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:30.321Z,1516704450.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:30.707Z,1516704450.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:30.722Z,1516704450.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:31.111Z,1516704451.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:31.125Z,1516704451.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:31.507Z,1516704451.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:31.522Z,1516704451.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:31.903Z,1516704451.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:31.918Z,1516704451.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:32.304Z,1516704452.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:32.318Z,1516704452.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:32.704Z,1516704452.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:32.718Z,1516704452.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:33.102Z,1516704453.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:33.131Z,1516704453.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:33.506Z,1516704453.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:33.521Z,1516704453.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:33.907Z,1516704453.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:33.923Z,1516704453.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:34.311Z,1516704454.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:34.326Z,1516704454.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:34.707Z,1516704454.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:34.722Z,1516704454.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:35.105Z,1516704455.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:35.121Z,1516704455.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:35.503Z,1516704455.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:35.518Z,1516704455.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:35.905Z,1516704455.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:35.924Z,1516704455.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:36.305Z,1516704456.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:36.320Z,1516704456.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:36.707Z,1516704456.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:36.722Z,1516704456.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:37.111Z,1516704457.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:37.125Z,1516704457.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:37.508Z,1516704457.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:37.531Z,1516704457.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:37.904Z,1516704457.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:37.919Z,1516704457.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:38.305Z,1516704458.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:38.319Z,1516704458.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:38.708Z,1516704458.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:38.729Z,1516704458.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:39.109Z,1516704459.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:39.124Z,1516704459.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:39.505Z,1516704459.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:39.524Z,1516704459.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:39.913Z,1516704459.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:39.933Z,1516704459.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:40.313Z,1516704460.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:40.333Z,1516704460.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:40.715Z,1516704460.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:40.729Z,1516704460.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:41.100Z,1516704461.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:41.122Z,1516704461.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:41.504Z,1516704461.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:41.519Z,1516704461.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:41.906Z,1516704461.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:41.920Z,1516704461.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:42.304Z,1516704462.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:42.319Z,1516704462.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:42.713Z,1516704462.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:42.729Z,1516704462.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:43.119Z,1516704463.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:43.133Z,1516704463.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:43.514Z,1516704463.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:43.529Z,1516704463.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:43.904Z,1516704463.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:43.919Z,1516704463.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:44.305Z,1516704464.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:44.319Z,1516704464.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:44.708Z,1516704464.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:44.729Z,1516704464.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:45.109Z,1516704465.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:45.124Z,1516704465.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:45.505Z,1516704465.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:45.524Z,1516704465.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:45.914Z,1516704465.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:45.929Z,1516704465.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:46.313Z,1516704466.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:46.333Z,1516704466.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:46.714Z,1516704466.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:46.729Z,1516704466.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:47.107Z,1516704467.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:47.122Z,1516704467.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:47.500Z,1516704467.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:47.518Z,1516704467.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:47.906Z,1516704467.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:47.920Z,1516704467.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:48.300Z,1516704468.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:48.322Z,1516704468.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:48.718Z,1516704468.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:48.737Z,1516704468.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:49.118Z,1516704469.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:49.133Z,1516704469.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:49.518Z,1516704469.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:49.533Z,1516704469.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:49.909Z,1516704469.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:49.924Z,1516704469.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:50.305Z,1516704470.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:50.324Z,1516704470.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:50.718Z,1516704470.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:50.733Z,1516704470.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:51.118Z,1516704471.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:51.137Z,1516704471.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:51.519Z,1516704471.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:51.533Z,1516704471.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:51.909Z,1516704471.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:51.924Z,1516704471.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:52.299Z,1516704472.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:52.333Z,1516704472.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:52.717Z,1516704472.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:52.732Z,1516704472.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:55.817Z,1516704475.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:55.832Z,1516704475.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:55.947Z,1516704475.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:55.989Z,1516704475.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:56.277Z,1516704476.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:56.293Z,1516704476.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:56.685Z,1516704476.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:56.701Z,1516704476.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:57.080Z,1516704477.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:57.101Z,1516704477.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:57.483Z,1516704477.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:57.498Z,1516704477.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:57.891Z,1516704477.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:57.906Z,1516704477.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:58.287Z,1516704478.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:58.302Z,1516704478.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:58.684Z,1516704478.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:58.699Z,1516704478.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:59.078Z,1516704479.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:59.101Z,1516704479.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:59.477Z,1516704479.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:59.501Z,1516704479.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:47:59.878Z,1516704479.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:47:59.910Z,1516704479.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:00.277Z,1516704480.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:00.307Z,1516704480.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:00.688Z,1516704480.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:00.715Z,1516704480.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:01.098Z,1516704481.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:01.113Z,1516704481.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:01.496Z,1516704481.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:01.512Z,1516704481.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:01.874Z,1516704481.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:01.911Z,1516704481.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:02.274Z,1516704482.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:02.309Z,1516704482.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:02.697Z,1516704482.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:02.713Z,1516704482.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:03.092Z,1516704483.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:03.119Z,1516704483.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:03.496Z,1516704483.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:03.517Z,1516704483.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:03.873Z,1516704483.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:03.910Z,1516704483.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:04.273Z,1516704484.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:04.310Z,1516704484.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:04.688Z,1516704484.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:04.710Z,1516704484.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:05.097Z,1516704485.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:05.111Z,1516704485.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:05.487Z,1516704485.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:05.513Z,1516704485.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:05.873Z,1516704485.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:05.905Z,1516704485.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:06.272Z,1516704486.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:06.306Z,1516704486.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:06.696Z,1516704486.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:06.711Z,1516704486.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:07.095Z,1516704487.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:07.110Z,1516704487.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:07.492Z,1516704487.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:07.507Z,1516704487.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:07.874Z,1516704487.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:07.905Z,1516704487.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:08.276Z,1516704488.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:08.308Z,1516704488.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:08.683Z,1516704488.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:08.718Z,1516704488.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:09.104Z,1516704489.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:09.119Z,1516704489.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:09.501Z,1516704489.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:09.516Z,1516704489.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:09.877Z,1516704489.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:09.908Z,1516704489.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:10.281Z,1516704490.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:10.301Z,1516704490.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:10.695Z,1516704490.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:10.726Z,1516704490.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:11.091Z,1516704491.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:11.105Z,1516704491.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:11.495Z,1516704491.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:11.510Z,1516704491.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:11.884Z,1516704491.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:11.899Z,1516704491.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:12.282Z,1516704492.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:12.296Z,1516704492.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:12.692Z,1516704492.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:12.713Z,1516704492.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:13.090Z,1516704493.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:13.105Z,1516704493.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:13.490Z,1516704493.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:13.505Z,1516704493.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:13.891Z,1516704493.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:13.906Z,1516704493.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:14.277Z,1516704494.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:14.298Z,1516704494.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:14.681Z,1516704494.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:14.695Z,1516704494.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:15.086Z,1516704495.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:15.101Z,1516704495.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:15.477Z,1516704495.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:15.498Z,1516704495.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:15.890Z,1516704495.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:15.912Z,1516704495.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:16.289Z,1516704496.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:16.309Z,1516704496.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:16.690Z,1516704496.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:16.708Z,1516704496.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:17.085Z,1516704497.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:17.100Z,1516704497.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:17.485Z,1516704497.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:17.500Z,1516704497.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:17.877Z,1516704497.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:17.907Z,1516704497.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:18.283Z,1516704498.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:18.297Z,1516704498.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:18.680Z,1516704498.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:18.694Z,1516704498.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:19.088Z,1516704499.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:19.115Z,1516704499.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:19.494Z,1516704499.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:19.509Z,1516704499.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:19.891Z,1516704499.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:19.906Z,1516704499.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:20.279Z,1516704500.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:20.298Z,1516704500.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:20.687Z,1516704500.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:20.701Z,1516704500.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:21.080Z,1516704501.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:21.100Z,1516704501.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:21.476Z,1516704501.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:21.499Z,1516704501.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:21.892Z,1516704501.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:21.906Z,1516704501.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:22.294Z,1516704502.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:22.313Z,1516704502.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:22.694Z,1516704502.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:22.717Z,1516704502.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:23.081Z,1516704503.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:23.096Z,1516704503.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:23.481Z,1516704503.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:23.501Z,1516704503.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:23.877Z,1516704503.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:23.899Z,1516704503.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:24.281Z,1516704504.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:24.300Z,1516704504.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:24.685Z,1516704504.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:24.705Z,1516704504.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:25.090Z,1516704505.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:25.105Z,1516704505.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:25.494Z,1516704505.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:25.516Z,1516704505.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:25.894Z,1516704505.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:25.909Z,1516704505.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:26.281Z,1516704506.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:26.301Z,1516704506.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:26.681Z,1516704506.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:26.696Z,1516704506.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:27.075Z,1516704507.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:27.090Z,1516704507.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:27.488Z,1516704507.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:27.517Z,1516704507.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:27.891Z,1516704507.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:27.914Z,1516704507.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:28.302Z,1516704508.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:28.317Z,1516704508.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:28.691Z,1516704508.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:28.721Z,1516704508.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:29.078Z,1516704509.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:29.117Z,1516704509.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:29.481Z,1516704509.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:29.515Z,1516704509.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:29.880Z,1516704509.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:29.914Z,1516704509.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:30.278Z,1516704510.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:30.293Z,1516704510.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:30.678Z,1516704510.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:30.693Z,1516704510.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:31.092Z,1516704511.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:31.123Z,1516704511.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:31.497Z,1516704511.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:31.527Z,1516704511.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:31.891Z,1516704511.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:31.925Z,1516704511.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:32.278Z,1516704512.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:32.293Z,1516704512.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:32.677Z,1516704512.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:32.704Z,1516704512.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:33.080Z,1516704513.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:33.095Z,1516704513.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:33.478Z,1516704513.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:33.503Z,1516704513.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:33.895Z,1516704513.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:33.928Z,1516704513.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:34.295Z,1516704514.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:34.326Z,1516704514.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:34.688Z,1516704514.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:34.703Z,1516704514.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:35.080Z,1516704515.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:35.095Z,1516704515.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:35.476Z,1516704515.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:35.513Z,1516704515.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:35.886Z,1516704515.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:35.901Z,1516704515.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:36.274Z,1516704516.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:36.311Z,1516704516.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:36.686Z,1516704516.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:36.702Z,1516704516.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:37.088Z,1516704517.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:37.115Z,1516704517.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:37.501Z,1516704517.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:37.516Z,1516704517.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:37.896Z,1516704517.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:37.912Z,1516704517.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:38.272Z,1516704518.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:38.305Z,1516704518.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:38.672Z,1516704518.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:38.712Z,1516704518.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:39.074Z,1516704519.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:39.089Z,1516704519.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:39.476Z,1516704519.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:39.493Z,1516704519.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:39.890Z,1516704519.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:39.919Z,1516704519.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:40.284Z,1516704520.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:40.307Z,1516704520.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:40.695Z,1516704520.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:40.725Z,1516704520.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:41.085Z,1516704521.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:41.099Z,1516704521.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:41.475Z,1516704521.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:41.490Z,1516704521.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:41.878Z,1516704521.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:41.893Z,1516704521.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:42.278Z,1516704522.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:42.303Z,1516704522.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:42.697Z,1516704522.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:42.728Z,1516704522.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:43.088Z,1516704523.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:43.104Z,1516704523.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:43.496Z,1516704523.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:43.510Z,1516704523.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:43.896Z,1516704523.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:43.927Z,1516704523.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:44.284Z,1516704524.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:44.305Z,1516704524.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:44.682Z,1516704524.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:44.697Z,1516704524.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:45.080Z,1516704525.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:45.100Z,1516704525.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:45.480Z,1516704525.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:45.495Z,1516704525.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:45.887Z,1516704525.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:45.902Z,1516704525.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:46.286Z,1516704526.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:46.305Z,1516704526.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:46.686Z,1516704526.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:46.705Z,1516704526.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:47.081Z,1516704527.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:47.096Z,1516704527.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:47.476Z,1516704527.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:47.496Z,1516704527.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:47.876Z,1516704527.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:47.905Z,1516704527.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:48.282Z,1516704528.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:48.296Z,1516704528.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:48.680Z,1516704528.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:48.695Z,1516704528.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:49.086Z,1516704529.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:49.105Z,1516704529.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:49.487Z,1516704529.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:49.502Z,1516704529.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:49.892Z,1516704529.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:49.907Z,1516704529.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:50.281Z,1516704530.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:50.301Z,1516704530.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:50.678Z,1516704530.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:50.705Z,1516704530.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:51.080Z,1516704531.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:51.100Z,1516704531.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:51.476Z,1516704531.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:51.501Z,1516704531.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:51.892Z,1516704531.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:51.907Z,1516704531.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:52.295Z,1516704532.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:52.310Z,1516704532.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:52.691Z,1516704532.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:52.706Z,1516704532.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:53.082Z,1516704533.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:53.104Z,1516704533.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:56.192Z,1516704536.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:56.208Z,1516704536.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:56.305Z,1516704536.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:56.348Z,1516704536.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:56.683Z,1516704536.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:56.698Z,1516704536.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:57.092Z,1516704537.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:57.107Z,1516704537.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:57.484Z,1516704537.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:57.498Z,1516704537.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:57.864Z,1516704537.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:57.901Z,1516704537.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:58.269Z,1516704538.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:58.301Z,1516704538.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:58.665Z,1516704538.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:58.701Z,1516704538.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:59.092Z,1516704539.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:59.106Z,1516704539.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:59.487Z,1516704539.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:59.513Z,1516704539.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:48:59.876Z,1516704539.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:48:59.909Z,1516704539.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:00.264Z,1516704540.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:00.301Z,1516704540.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:00.664Z,1516704540.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:00.699Z,1516704540.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:01.065Z,1516704541.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:01.080Z,1516704541.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:01.464Z,1516704541.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:01.485Z,1516704541.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:01.883Z,1516704541.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:01.909Z,1516704541.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:02.287Z,1516704542.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:02.317Z,1516704542.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:02.687Z,1516704542.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:02.717Z,1516704542.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:03.069Z,1516704543.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:03.088Z,1516704543.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:03.472Z,1516704543.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:03.509Z,1516704543.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:03.869Z,1516704543.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:03.884Z,1516704543.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:04.269Z,1516704544.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:04.284Z,1516704544.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:04.669Z,1516704544.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:04.684Z,1516704544.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:05.087Z,1516704545.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:05.112Z,1516704545.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:05.491Z,1516704545.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:05.515Z,1516704545.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:05.883Z,1516704545.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:05.914Z,1516704545.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:06.273Z,1516704546.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:06.288Z,1516704546.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:06.676Z,1516704546.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:06.691Z,1516704546.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:07.074Z,1516704547.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:07.089Z,1516704547.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:07.473Z,1516704547.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:07.488Z,1516704547.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:07.875Z,1516704547.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:07.890Z,1516704547.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:08.279Z,1516704548.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:08.294Z,1516704548.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:08.687Z,1516704548.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:08.718Z,1516704548.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:09.072Z,1516704549.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:09.097Z,1516704549.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:09.474Z,1516704549.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:09.489Z,1516704549.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:09.870Z,1516704549.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:09.886Z,1516704549.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:10.274Z,1516704550.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:10.289Z,1516704550.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:10.673Z,1516704550.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:10.693Z,1516704550.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:11.084Z,1516704551.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:11.099Z,1516704551.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:11.484Z,1516704551.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:11.498Z,1516704551.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:11.880Z,1516704551.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:11.903Z,1516704551.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:12.273Z,1516704552.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:12.293Z,1516704552.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:12.679Z,1516704552.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:12.693Z,1516704552.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:13.079Z,1516704553.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:13.094Z,1516704553.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:13.468Z,1516704553.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:13.501Z,1516704553.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:13.890Z,1516704553.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:13.905Z,1516704553.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:14.284Z,1516704554.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:14.300Z,1516704554.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:14.687Z,1516704554.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:14.710Z,1516704554.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:15.065Z,1516704555.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:15.099Z,1516704555.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:15.463Z,1516704555.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:15.478Z,1516704555.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:15.865Z,1516704555.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:15.885Z,1516704555.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:16.271Z,1516704556.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:16.285Z,1516704556.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:16.669Z,1516704556.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:16.684Z,1516704556.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:17.088Z,1516704557.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:17.113Z,1516704557.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:17.492Z,1516704557.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:17.518Z,1516704557.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:17.884Z,1516704557.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:17.917Z,1516704557.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:18.276Z,1516704558.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:18.313Z,1516704558.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:18.674Z,1516704558.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:18.689Z,1516704558.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:19.072Z,1516704559.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:19.087Z,1516704559.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:19.470Z,1516704559.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:19.489Z,1516704559.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:19.876Z,1516704559.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:19.890Z,1516704559.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:20.275Z,1516704560.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:20.290Z,1516704560.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:20.676Z,1516704560.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:20.691Z,1516704560.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:21.073Z,1516704561.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:21.092Z,1516704561.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:21.468Z,1516704561.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:21.497Z,1516704561.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:21.877Z,1516704561.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:21.892Z,1516704561.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:22.274Z,1516704562.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:22.289Z,1516704562.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:22.672Z,1516704562.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:22.688Z,1516704562.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:23.078Z,1516704563.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:23.094Z,1516704563.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:23.478Z,1516704563.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:23.497Z,1516704563.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:23.880Z,1516704563.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:23.894Z,1516704563.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:24.272Z,1516704564.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:24.287Z,1516704564.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:24.673Z,1516704564.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:24.688Z,1516704564.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:25.069Z,1516704565.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:25.096Z,1516704565.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:25.476Z,1516704565.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:25.497Z,1516704565.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:25.883Z,1516704565.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:25.898Z,1516704565.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:26.282Z,1516704566.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:26.297Z,1516704566.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:26.683Z,1516704566.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:26.697Z,1516704566.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:27.073Z,1516704567.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:27.088Z,1516704567.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:27.468Z,1516704567.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:27.490Z,1516704567.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:27.872Z,1516704567.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:27.887Z,1516704567.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:28.271Z,1516704568.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:28.297Z,1516704568.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:28.672Z,1516704568.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:28.693Z,1516704568.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:29.082Z,1516704569.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:29.105Z,1516704569.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:29.482Z,1516704569.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:29.497Z,1516704569.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:29.882Z,1516704569.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:29.901Z,1516704569.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:30.272Z,1516704570.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:30.287Z,1516704570.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:30.673Z,1516704570.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:30.687Z,1516704570.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:31.072Z,1516704571.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:31.091Z,1516704571.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:31.468Z,1516704571.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:31.491Z,1516704571.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:31.881Z,1516704571.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:31.901Z,1516704571.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:32.287Z,1516704572.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:32.302Z,1516704572.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:32.683Z,1516704572.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:32.698Z,1516704572.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:33.064Z,1516704573.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:33.091Z,1516704573.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:33.462Z,1516704573.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:33.497Z,1516704573.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:33.864Z,1516704573.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:33.897Z,1516704573.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:34.278Z,1516704574.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:34.292Z,1516704574.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:34.676Z,1516704574.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:34.694Z,1516704574.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:35.083Z,1516704575.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:35.098Z,1516704575.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:35.488Z,1516704575.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:35.502Z,1516704575.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:35.883Z,1516704575.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:35.898Z,1516704575.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:36.264Z,1516704576.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:36.297Z,1516704576.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:36.677Z,1516704576.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:36.692Z,1516704576.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:37.077Z,1516704577.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:37.092Z,1516704577.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:37.464Z,1516704577.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:37.501Z,1516704577.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:37.888Z,1516704577.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:37.902Z,1516704577.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:38.280Z,1516704578.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:38.301Z,1516704578.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:38.680Z,1516704578.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:38.701Z,1516704578.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:39.065Z,1516704579.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:39.100Z,1516704579.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:39.462Z,1516704579.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:39.493Z,1516704579.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:39.883Z,1516704579.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:39.898Z,1516704579.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:40.287Z,1516704580.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:40.302Z,1516704580.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:40.683Z,1516704580.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:40.698Z,1516704580.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:41.065Z,1516704581.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:41.092Z,1516704581.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:41.464Z,1516704581.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:41.499Z,1516704581.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:41.875Z,1516704581.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:41.901Z,1516704581.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:42.279Z,1516704582.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:42.313Z,1516704582.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:42.674Z,1516704582.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:42.705Z,1516704582.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:43.069Z,1516704583.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:43.100Z,1516704583.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:43.464Z,1516704583.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:43.485Z,1516704583.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:43.883Z,1516704583.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:43.914Z,1516704583.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:44.279Z,1516704584.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:44.310Z,1516704584.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:44.683Z,1516704584.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:44.716Z,1516704584.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:45.077Z,1516704585.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:45.091Z,1516704585.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:45.466Z,1516704585.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:45.481Z,1516704585.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:45.887Z,1516704585.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:45.911Z,1516704585.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:46.291Z,1516704586.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:46.315Z,1516704586.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:46.683Z,1516704586.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:46.719Z,1516704586.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:47.070Z,1516704587.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:47.093Z,1516704587.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:47.470Z,1516704587.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:47.504Z,1516704587.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:47.886Z,1516704587.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:47.901Z,1516704587.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:48.286Z,1516704588.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:48.309Z,1516704588.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:48.688Z,1516704588.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:48.702Z,1516704588.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:49.072Z,1516704589.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:49.092Z,1516704589.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:49.468Z,1516704589.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:49.491Z,1516704589.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:49.884Z,1516704589.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:49.899Z,1516704589.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:50.282Z,1516704590.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:50.297Z,1516704590.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:50.686Z,1516704590.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:50.701Z,1516704590.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:51.079Z,1516704591.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:51.093Z,1516704591.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:51.471Z,1516704591.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:51.491Z,1516704591.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:51.882Z,1516704591.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:51.906Z,1516704591.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:52.288Z,1516704592.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:52.303Z,1516704592.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:52.686Z,1516704592.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:52.701Z,1516704592.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:53.065Z,1516704593.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:53.093Z,1516704593.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:53.465Z,1516704593.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:53.502Z,1516704593.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:56.591Z,1516704596.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:56.607Z,1516704596.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:56.720Z,1516704596.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:56.757Z,1516704596.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:57.097Z,1516704597.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:57.112Z,1516704597.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:57.478Z,1516704597.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:57.509Z,1516704597.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:57.873Z,1516704597.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:57.900Z,1516704597.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:58.274Z,1516704598.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:58.301Z,1516704598.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:58.677Z,1516704598.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:58.705Z,1516704598.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:59.088Z,1516704599.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:59.111Z,1516704599.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:59.493Z,1516704599.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:59.513Z,1516704599.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:49:59.883Z,1516704599.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:49:59.924Z,1516704599.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:00.276Z,1516704600.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:00.314Z,1516704600.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:00.672Z,1516704600.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:00.717Z,1516704600.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.077Z,1516704601.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:01.112Z,1516704601.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.472Z,1516704601.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:01.493Z,1516704601.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.891Z,1516704601.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:01.922Z,1516704601.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.923Z,1516704601.923 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.923Z,1516704601.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 151 2018-01-23T10:50:01.924Z,1516704601.924 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:50:01.925Z,1516704601.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:01.925Z,1516704601.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151 2018-01-23T10:50:01.925Z,1516704601.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:50:01.938Z,1516704601.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:50:01.938Z,1516704601.938 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:50:02.291Z,1516704602.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:02.326Z,1516704602.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:02.326Z,1516704602.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151 2018-01-23T10:50:02.326Z,1516704602.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:50:02.339Z,1516704602.339 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:50:02.339Z,1516704602.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:50:02.339Z,1516704602.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 151 2018-01-23T10:50:02.340Z,1516704602.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:50:02.340Z,1516704602.340 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151 2018-01-23T10:50:02.699Z,1516704602.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:02.722Z,1516704602.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:50:02.722Z,1516704602.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:50:02.722Z,1516704602.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:50:02.723Z,1516704602.723 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:50:02.723Z,1516704602.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:50:02.724Z,1516704602.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:50:02.735Z,1516704602.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:50:02.735Z,1516704602.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151 2018-01-23T10:50:03.081Z,1516704603.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:03.107Z,1516704603.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:50:03.107Z,1516704603.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:50:03.107Z,1516704603.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:50:03.481Z,1516704603.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:03.496Z,1516704603.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:50:03.497Z,1516704603.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:03.888Z,1516704603.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:03.907Z,1516704603.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:50:03.908Z,1516704603.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:04.289Z,1516704604.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:04.303Z,1516704604.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:50:04.304Z,1516704604.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:04.690Z,1516704604.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:04.705Z,1516704604.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:50:04.706Z,1516704604.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:05.077Z,1516704605.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:05.098Z,1516704605.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:50:05.100Z,1516704605.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:05.480Z,1516704605.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:05.494Z,1516704605.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:50:05.495Z,1516704605.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:05.890Z,1516704605.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:05.905Z,1516704605.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:50:05.906Z,1516704605.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:06.289Z,1516704606.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:06.308Z,1516704606.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:50:06.309Z,1516704606.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:06.689Z,1516704606.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:06.708Z,1516704606.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:50:06.709Z,1516704606.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:07.086Z,1516704607.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:07.100Z,1516704607.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:50:07.101Z,1516704607.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:07.477Z,1516704607.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:07.503Z,1516704607.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:50:07.504Z,1516704607.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:07.889Z,1516704607.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:07.908Z,1516704607.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:50:07.909Z,1516704607.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:08.290Z,1516704608.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:08.305Z,1516704608.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:50:08.306Z,1516704608.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:08.691Z,1516704608.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:08.705Z,1516704608.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:50:08.706Z,1516704608.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:09.081Z,1516704609.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:09.095Z,1516704609.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:50:09.096Z,1516704609.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:09.481Z,1516704609.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:09.496Z,1516704609.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:50:09.497Z,1516704609.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:09.886Z,1516704609.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:09.913Z,1516704609.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:50:09.914Z,1516704609.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:10.293Z,1516704610.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:10.307Z,1516704610.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:50:10.308Z,1516704610.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:10.694Z,1516704610.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:10.709Z,1516704610.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:50:10.710Z,1516704610.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:11.079Z,1516704611.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:11.099Z,1516704611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:50:11.100Z,1516704611.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:11.480Z,1516704611.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:11.500Z,1516704611.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:50:11.501Z,1516704611.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:11.895Z,1516704611.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:11.910Z,1516704611.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:50:11.911Z,1516704611.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:12.295Z,1516704612.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:12.310Z,1516704612.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:50:12.311Z,1516704612.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:12.691Z,1516704612.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:12.712Z,1516704612.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:50:12.713Z,1516704612.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:13.086Z,1516704613.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:13.101Z,1516704613.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:50:13.102Z,1516704613.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:13.476Z,1516704613.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:13.498Z,1516704613.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:50:13.499Z,1516704613.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:13.893Z,1516704613.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:13.912Z,1516704613.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:50:13.913Z,1516704613.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:14.292Z,1516704614.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:14.306Z,1516704614.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:50:14.307Z,1516704614.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:14.690Z,1516704614.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:14.705Z,1516704614.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:50:14.706Z,1516704614.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:15.081Z,1516704615.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:15.100Z,1516704615.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:50:15.101Z,1516704615.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:15.485Z,1516704615.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:15.500Z,1516704615.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:50:15.500Z,1516704615.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:15.890Z,1516704615.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:15.905Z,1516704615.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:50:15.906Z,1516704615.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:16.293Z,1516704616.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:16.312Z,1516704616.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:50:16.313Z,1516704616.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:16.691Z,1516704616.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:16.706Z,1516704616.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:50:16.707Z,1516704616.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:17.084Z,1516704617.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:17.103Z,1516704617.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:50:17.104Z,1516704617.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:17.480Z,1516704617.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:17.519Z,1516704617.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:50:17.520Z,1516704617.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:17.891Z,1516704617.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:17.916Z,1516704617.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:50:17.917Z,1516704617.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:18.305Z,1516704618.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:18.320Z,1516704618.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:50:18.321Z,1516704618.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:18.691Z,1516704618.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:18.716Z,1516704618.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:50:18.717Z,1516704618.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:19.078Z,1516704619.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:19.093Z,1516704619.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:50:19.094Z,1516704619.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:19.484Z,1516704619.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:19.524Z,1516704619.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:50:19.525Z,1516704619.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:19.895Z,1516704619.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:19.926Z,1516704619.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:50:19.927Z,1516704619.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:20.295Z,1516704620.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:20.321Z,1516704620.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:50:20.322Z,1516704620.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:20.699Z,1516704620.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:20.730Z,1516704620.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:50:20.732Z,1516704620.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:21.080Z,1516704621.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:21.094Z,1516704621.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:50:21.095Z,1516704621.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:21.481Z,1516704621.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:21.496Z,1516704621.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:50:21.497Z,1516704621.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:21.880Z,1516704621.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:21.907Z,1516704621.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:50:21.908Z,1516704621.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:22.299Z,1516704622.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:22.314Z,1516704622.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:50:22.331Z,1516704622.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:22.690Z,1516704622.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:22.705Z,1516704622.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:23.090Z,1516704623.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:23.109Z,1516704623.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:23.483Z,1516704623.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:23.498Z,1516704623.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:23.885Z,1516704623.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:23.900Z,1516704623.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:24.284Z,1516704624.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:24.302Z,1516704624.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:24.680Z,1516704624.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:24.695Z,1516704624.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:25.092Z,1516704625.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:25.107Z,1516704625.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:25.489Z,1516704625.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:25.508Z,1516704625.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:25.892Z,1516704625.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:25.906Z,1516704625.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:26.281Z,1516704626.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:26.296Z,1516704626.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:26.677Z,1516704626.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:26.701Z,1516704626.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:27.082Z,1516704627.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:27.097Z,1516704627.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:27.483Z,1516704627.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:27.503Z,1516704627.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:27.876Z,1516704627.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:27.898Z,1516704627.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:28.287Z,1516704628.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:28.306Z,1516704628.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:28.695Z,1516704628.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:28.710Z,1516704628.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:29.094Z,1516704629.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:29.109Z,1516704629.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:29.489Z,1516704629.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:29.504Z,1516704629.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:29.885Z,1516704629.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:29.900Z,1516704629.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:30.282Z,1516704630.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:30.309Z,1516704630.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:30.686Z,1516704630.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:30.701Z,1516704630.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:31.096Z,1516704631.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:31.111Z,1516704631.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:31.492Z,1516704631.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:31.520Z,1516704631.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:31.896Z,1516704631.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:31.911Z,1516704631.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:32.275Z,1516704632.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:32.302Z,1516704632.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:32.681Z,1516704632.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:32.713Z,1516704632.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:33.072Z,1516704633.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:33.124Z,1516704633.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:33.479Z,1516704633.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:33.508Z,1516704633.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:33.876Z,1516704633.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:33.912Z,1516704633.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:34.301Z,1516704634.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:34.316Z,1516704634.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:34.689Z,1516704634.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:34.723Z,1516704634.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:35.088Z,1516704635.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:35.117Z,1516704635.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:35.475Z,1516704635.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:35.490Z,1516704635.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:35.881Z,1516704635.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:35.913Z,1516704635.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:36.278Z,1516704636.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:36.297Z,1516704636.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:36.679Z,1516704636.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:36.695Z,1516704636.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:37.092Z,1516704637.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:37.119Z,1516704637.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:37.496Z,1516704637.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:37.519Z,1516704637.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:37.888Z,1516704637.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:37.909Z,1516704637.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:38.289Z,1516704638.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:38.305Z,1516704638.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:38.684Z,1516704638.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:38.698Z,1516704638.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:39.082Z,1516704639.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:39.098Z,1516704639.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:39.482Z,1516704639.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:39.526Z,1516704639.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:39.882Z,1516704639.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:39.913Z,1516704639.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:40.292Z,1516704640.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:40.307Z,1516704640.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:40.694Z,1516704640.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:40.710Z,1516704640.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:41.092Z,1516704641.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:41.109Z,1516704641.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:41.483Z,1516704641.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:41.499Z,1516704641.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:41.884Z,1516704641.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:41.899Z,1516704641.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:42.283Z,1516704642.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:42.298Z,1516704642.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:42.681Z,1516704642.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:42.713Z,1516704642.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:43.097Z,1516704643.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:43.113Z,1516704643.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:43.493Z,1516704643.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:43.520Z,1516704643.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:43.891Z,1516704643.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:43.906Z,1516704643.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:44.273Z,1516704644.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:44.313Z,1516704644.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:44.684Z,1516704644.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:44.706Z,1516704644.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:45.073Z,1516704645.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:45.106Z,1516704645.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:45.488Z,1516704645.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:45.503Z,1516704645.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:45.872Z,1516704645.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:45.913Z,1516704645.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:46.297Z,1516704646.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:46.312Z,1516704646.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:46.702Z,1516704646.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:46.722Z,1516704646.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:47.093Z,1516704647.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:47.108Z,1516704647.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:47.472Z,1516704647.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:47.510Z,1516704647.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:47.872Z,1516704647.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:47.906Z,1516704647.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:48.273Z,1516704648.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:48.306Z,1516704648.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:48.674Z,1516704648.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:48.710Z,1516704648.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:49.097Z,1516704649.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:49.133Z,1516704649.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:49.502Z,1516704649.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:49.510Z,1516704649.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x48924 got:0x1857 2018-01-23T10:50:49.549Z,1516704649.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:49.898Z,1516704649.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:49.913Z,1516704649.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:50.274Z,1516704650.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:50.307Z,1516704650.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:50.672Z,1516704650.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:50.716Z,1516704650.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:51.072Z,1516704651.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:51.113Z,1516704651.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:51.473Z,1516704651.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:51.492Z,1516704651.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:51.879Z,1516704651.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:51.896Z,1516704651.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:52.287Z,1516704652.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:52.329Z,1516704652.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:52.332Z,1516704652.332 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T10:50:52.332Z,1516704652.332 [Default:CheckIn:C.Wait] Stopped 2018-01-23T10:50:52.332Z,1516704652.332 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T10:50:52.332Z,1516704652.332 [Default:CheckIn:D] Running Loop=1 2018-01-23T10:50:52.691Z,1516704652.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:52.725Z,1516704652.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:52.728Z,1516704652.728 [Default:CheckIn:D] Stopped 2018-01-23T10:50:52.728Z,1516704652.728 [Default:CheckIn:E] Running Loop=1 2018-01-23T10:50:53.097Z,1516704653.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:53.122Z,1516704653.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:53.125Z,1516704653.125 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 453.011133 min 2018-01-23T10:50:53.125Z,1516704653.125 [Default:CheckIn:E] Stopped 2018-01-23T10:50:53.125Z,1516704653.125 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T10:50:53.125Z,1516704653.125 [Default:CheckIn] Stopped 2018-01-23T10:50:53.125Z,1516704653.125 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T10:50:53.126Z,1516704653.126 [Default:CheckIn](INFO): Running loop #45 2018-01-23T10:50:53.126Z,1516704653.126 [Default:CheckIn] Running Loop=45 2018-01-23T10:50:53.126Z,1516704653.126 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T10:50:53.126Z,1516704653.126 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T10:50:53.486Z,1516704653.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:53.555Z,1516704653.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:58.398Z,1516704658.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:58.433Z,1516704658.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:58.532Z,1516704658.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:58.561Z,1516704658.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:58.891Z,1516704658.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:58.908Z,1516704658.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:59.295Z,1516704659.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:59.316Z,1516704659.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:50:59.692Z,1516704659.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:50:59.707Z,1516704659.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:00.090Z,1516704660.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:00.110Z,1516704660.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:00.488Z,1516704660.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:00.544Z,1516704660.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:00.884Z,1516704660.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:00.916Z,1516704660.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:01.300Z,1516704661.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:01.330Z,1516704661.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:01.702Z,1516704661.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:01.756Z,1516704661.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:02.089Z,1516704662.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:02.129Z,1516704662.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:02.507Z,1516704662.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:02.573Z,1516704662.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:02.882Z,1516704662.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:02.933Z,1516704662.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:03.278Z,1516704663.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:03.321Z,1516704663.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:03.699Z,1516704663.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:03.755Z,1516704663.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:04.101Z,1516704664.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:04.155Z,1516704664.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:04.496Z,1516704664.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:04.517Z,1516704664.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:04.901Z,1516704664.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:04.921Z,1516704664.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:05.278Z,1516704665.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:05.346Z,1516704665.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:05.682Z,1516704665.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:05.712Z,1516704665.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:06.082Z,1516704666.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:06.125Z,1516704666.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:06.479Z,1516704666.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:06.555Z,1516704666.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:06.878Z,1516704666.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:06.922Z,1516704666.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:07.302Z,1516704667.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:07.334Z,1516704667.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:07.693Z,1516704667.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:07.735Z,1516704667.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:08.089Z,1516704668.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:08.113Z,1516704668.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:08.485Z,1516704668.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:08.508Z,1516704668.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:08.887Z,1516704668.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:08.942Z,1516704668.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:09.287Z,1516704669.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:09.315Z,1516704669.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:09.682Z,1516704669.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:09.728Z,1516704669.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:10.098Z,1516704670.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:10.157Z,1516704670.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:10.499Z,1516704670.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:10.514Z,1516704670.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:10.892Z,1516704670.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:10.913Z,1516704670.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:11.276Z,1516704671.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:11.311Z,1516704671.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:11.680Z,1516704671.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:11.706Z,1516704671.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:12.076Z,1516704672.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:12.102Z,1516704672.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:12.477Z,1516704672.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:12.512Z,1516704672.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:12.880Z,1516704672.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:12.906Z,1516704672.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:13.295Z,1516704673.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:13.310Z,1516704673.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:13.699Z,1516704673.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:13.720Z,1516704673.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:14.092Z,1516704674.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:14.113Z,1516704674.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:14.476Z,1516704674.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:14.509Z,1516704674.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:14.876Z,1516704674.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:14.912Z,1516704674.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:15.278Z,1516704675.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:15.309Z,1516704675.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:15.681Z,1516704675.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:15.707Z,1516704675.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:16.094Z,1516704676.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:16.121Z,1516704676.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:16.493Z,1516704676.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:16.516Z,1516704676.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:16.895Z,1516704676.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:16.917Z,1516704676.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:17.276Z,1516704677.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:17.313Z,1516704677.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:17.680Z,1516704677.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:17.706Z,1516704677.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:18.076Z,1516704678.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:18.109Z,1516704678.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:18.477Z,1516704678.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:18.513Z,1516704678.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:18.880Z,1516704678.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:18.906Z,1516704678.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:19.295Z,1516704679.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:19.310Z,1516704679.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:19.699Z,1516704679.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:19.714Z,1516704679.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:20.091Z,1516704680.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:20.113Z,1516704680.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:20.476Z,1516704680.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:20.508Z,1516704680.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:20.875Z,1516704680.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:20.913Z,1516704680.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:21.281Z,1516704681.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:21.307Z,1516704681.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:21.676Z,1516704681.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:21.708Z,1516704681.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:22.091Z,1516704682.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:22.114Z,1516704682.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:22.497Z,1516704682.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:22.517Z,1516704682.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:22.891Z,1516704682.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:22.915Z,1516704682.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:23.276Z,1516704683.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:23.313Z,1516704683.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:23.680Z,1516704683.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:23.706Z,1516704683.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:24.076Z,1516704684.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:24.109Z,1516704684.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:24.477Z,1516704684.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:24.513Z,1516704684.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:24.880Z,1516704684.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:24.906Z,1516704684.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:25.291Z,1516704685.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:25.314Z,1516704685.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:25.699Z,1516704685.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:25.714Z,1516704685.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:26.092Z,1516704686.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:26.114Z,1516704686.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:26.476Z,1516704686.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:26.513Z,1516704686.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:26.876Z,1516704686.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:26.913Z,1516704686.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:27.281Z,1516704687.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:27.308Z,1516704687.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:27.676Z,1516704687.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:27.709Z,1516704687.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:28.091Z,1516704688.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:28.114Z,1516704688.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:28.497Z,1516704688.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:28.517Z,1516704688.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:28.891Z,1516704688.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:28.914Z,1516704688.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:29.276Z,1516704689.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:29.313Z,1516704689.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:29.680Z,1516704689.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:29.713Z,1516704689.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:30.084Z,1516704690.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:30.111Z,1516704690.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:30.478Z,1516704690.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:30.514Z,1516704690.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:30.878Z,1516704690.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:30.913Z,1516704690.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:31.300Z,1516704691.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:31.315Z,1516704691.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:31.702Z,1516704691.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:31.720Z,1516704691.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:32.089Z,1516704692.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:32.120Z,1516704692.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:32.476Z,1516704692.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:32.497Z,1516704692.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:32.885Z,1516704692.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:32.900Z,1516704692.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:33.285Z,1516704693.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:33.302Z,1516704693.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:33.681Z,1516704693.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:33.698Z,1516704693.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:34.091Z,1516704694.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:34.119Z,1516704694.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:34.487Z,1516704694.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:34.504Z,1516704694.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:34.899Z,1516704694.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:34.931Z,1516704694.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:35.281Z,1516704695.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:35.309Z,1516704695.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:35.681Z,1516704695.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:35.704Z,1516704695.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:36.083Z,1516704696.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:36.107Z,1516704696.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:36.488Z,1516704696.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:36.508Z,1516704696.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:36.885Z,1516704696.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:36.900Z,1516704696.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:37.312Z,1516704697.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:37.334Z,1516704697.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:37.690Z,1516704697.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:37.705Z,1516704697.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:38.090Z,1516704698.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:38.105Z,1516704698.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:38.484Z,1516704698.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:38.500Z,1516704698.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:38.885Z,1516704698.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:38.899Z,1516704698.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:39.285Z,1516704699.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:39.300Z,1516704699.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:39.680Z,1516704699.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:39.702Z,1516704699.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:40.095Z,1516704700.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:40.113Z,1516704700.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:40.494Z,1516704700.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:40.510Z,1516704700.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:40.895Z,1516704700.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:40.909Z,1516704700.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:41.285Z,1516704701.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:41.304Z,1516704701.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:41.688Z,1516704701.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:41.709Z,1516704701.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:42.090Z,1516704702.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:42.105Z,1516704702.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:42.486Z,1516704702.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:42.500Z,1516704702.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:42.884Z,1516704702.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:42.899Z,1516704702.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:43.293Z,1516704703.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:43.313Z,1516704703.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:43.694Z,1516704703.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:43.709Z,1516704703.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:44.092Z,1516704704.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:44.119Z,1516704704.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:44.492Z,1516704704.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:44.513Z,1516704704.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:44.885Z,1516704704.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:44.900Z,1516704704.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:45.284Z,1516704705.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:45.311Z,1516704705.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:45.688Z,1516704705.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:45.707Z,1516704705.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:46.096Z,1516704706.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:46.110Z,1516704706.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:46.492Z,1516704706.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:46.519Z,1516704706.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:46.895Z,1516704706.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:46.910Z,1516704706.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:47.276Z,1516704707.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:47.313Z,1516704707.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:47.695Z,1516704707.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:47.710Z,1516704707.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:48.076Z,1516704708.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:48.108Z,1516704708.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:48.477Z,1516704708.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:48.513Z,1516704708.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:48.876Z,1516704708.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:48.909Z,1516704708.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:49.295Z,1516704709.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:49.310Z,1516704709.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:49.699Z,1516704709.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:49.714Z,1516704709.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:50.091Z,1516704710.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:50.113Z,1516704710.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:50.476Z,1516704710.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:50.509Z,1516704710.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:50.876Z,1516704710.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:50.913Z,1516704710.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:51.281Z,1516704711.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:51.307Z,1516704711.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:51.676Z,1516704711.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:51.709Z,1516704711.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:52.091Z,1516704712.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:52.114Z,1516704712.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:52.497Z,1516704712.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:52.524Z,1516704712.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:52.887Z,1516704712.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:52.913Z,1516704712.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:53.285Z,1516704713.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:53.312Z,1516704713.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:53.682Z,1516704713.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:53.713Z,1516704713.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:56.800Z,1516704716.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:56.816Z,1516704716.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:56.932Z,1516704716.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:56.965Z,1516704716.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:57.283Z,1516704717.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:57.307Z,1516704717.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:57.669Z,1516704717.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:57.684Z,1516704717.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:58.066Z,1516704718.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:58.081Z,1516704718.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:58.466Z,1516704718.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:58.489Z,1516704718.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:58.865Z,1516704718.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:58.880Z,1516704718.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:59.279Z,1516704719.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:59.294Z,1516704719.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:51:59.675Z,1516704719.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:51:59.690Z,1516704719.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:00.083Z,1516704720.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:00.097Z,1516704720.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:00.469Z,1516704720.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:00.489Z,1516704720.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:00.865Z,1516704720.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:00.886Z,1516704720.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:01.270Z,1516704721.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:01.284Z,1516704721.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:01.672Z,1516704721.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:01.687Z,1516704721.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:02.074Z,1516704722.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:02.093Z,1516704722.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:02.487Z,1516704722.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:02.501Z,1516704722.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:02.876Z,1516704722.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:02.890Z,1516704722.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:03.268Z,1516704723.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:03.287Z,1516704723.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:03.669Z,1516704723.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:03.684Z,1516704723.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:04.074Z,1516704724.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:04.089Z,1516704724.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:04.475Z,1516704724.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:04.490Z,1516704724.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:04.876Z,1516704724.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:04.897Z,1516704724.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:05.273Z,1516704725.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:05.288Z,1516704725.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:05.669Z,1516704725.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:05.684Z,1516704725.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:06.076Z,1516704726.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:06.096Z,1516704726.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:06.479Z,1516704726.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:06.494Z,1516704726.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:06.875Z,1516704726.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:06.890Z,1516704726.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:07.276Z,1516704727.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:07.290Z,1516704727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:07.680Z,1516704727.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:07.701Z,1516704727.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:08.079Z,1516704728.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:08.094Z,1516704728.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:08.480Z,1516704728.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:08.495Z,1516704728.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:08.879Z,1516704728.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:08.894Z,1516704728.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:09.266Z,1516704729.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:09.293Z,1516704729.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:09.676Z,1516704729.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:09.691Z,1516704729.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:10.082Z,1516704730.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:10.097Z,1516704730.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:10.485Z,1516704730.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:10.500Z,1516704730.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:10.884Z,1516704730.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:10.899Z,1516704730.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:11.268Z,1516704731.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:11.296Z,1516704731.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:11.673Z,1516704731.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:11.689Z,1516704731.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:12.081Z,1516704732.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:12.100Z,1516704732.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:12.482Z,1516704732.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:12.499Z,1516704732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:12.887Z,1516704732.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:12.909Z,1516704732.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:13.262Z,1516704733.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:13.289Z,1516704733.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:13.678Z,1516704733.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:13.693Z,1516704733.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:14.086Z,1516704734.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:14.106Z,1516704734.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:14.484Z,1516704734.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:14.498Z,1516704734.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:14.881Z,1516704734.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:14.896Z,1516704734.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:15.261Z,1516704735.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:15.297Z,1516704735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:15.678Z,1516704735.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:15.693Z,1516704735.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:16.076Z,1516704736.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:16.099Z,1516704736.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:16.480Z,1516704736.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:16.506Z,1516704736.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:16.883Z,1516704736.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:16.899Z,1516704736.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:17.269Z,1516704737.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:17.296Z,1516704737.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:17.681Z,1516704737.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:17.696Z,1516704737.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:18.080Z,1516704738.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:18.095Z,1516704738.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:18.476Z,1516704738.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:18.497Z,1516704738.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:18.890Z,1516704738.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:18.905Z,1516704738.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:19.282Z,1516704739.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:19.296Z,1516704739.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:19.661Z,1516704739.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:19.697Z,1516704739.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:20.071Z,1516704740.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:20.105Z,1516704740.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:20.491Z,1516704740.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:20.506Z,1516704740.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:20.880Z,1516704740.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:20.901Z,1516704740.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:21.261Z,1516704741.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:21.296Z,1516704741.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:21.660Z,1516704741.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:21.697Z,1516704741.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:22.072Z,1516704742.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:22.105Z,1516704742.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:22.491Z,1516704742.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:22.506Z,1516704742.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:22.871Z,1516704742.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:22.898Z,1516704742.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:23.259Z,1516704743.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:23.274Z,1516704743.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:23.664Z,1516704743.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:23.695Z,1516704743.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:24.068Z,1516704744.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:24.108Z,1516704744.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:24.472Z,1516704744.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:24.499Z,1516704744.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:24.896Z,1516704744.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:24.910Z,1516704744.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:25.279Z,1516704745.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:25.313Z,1516704745.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:25.668Z,1516704745.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:25.705Z,1516704745.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:26.072Z,1516704746.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:26.109Z,1516704746.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:26.468Z,1516704746.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:26.483Z,1516704746.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:26.867Z,1516704746.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:26.890Z,1516704746.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:27.283Z,1516704747.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:27.314Z,1516704747.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:27.683Z,1516704747.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:27.718Z,1516704747.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:28.072Z,1516704748.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:28.093Z,1516704748.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:28.468Z,1516704748.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:28.487Z,1516704748.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:28.870Z,1516704748.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:28.897Z,1516704748.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:29.266Z,1516704749.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:29.294Z,1516704749.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:29.675Z,1516704749.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:29.690Z,1516704749.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:30.069Z,1516704750.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:30.095Z,1516704750.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:30.476Z,1516704750.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:30.500Z,1516704750.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:30.887Z,1516704750.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:30.902Z,1516704750.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:31.283Z,1516704751.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:31.297Z,1516704751.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:31.676Z,1516704751.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:31.697Z,1516704751.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:32.070Z,1516704752.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:32.086Z,1516704752.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:32.474Z,1516704752.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:32.489Z,1516704752.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:32.876Z,1516704752.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:32.893Z,1516704752.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:33.283Z,1516704753.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:33.298Z,1516704753.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:33.683Z,1516704753.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:33.698Z,1516704753.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:34.079Z,1516704754.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:34.094Z,1516704754.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:34.476Z,1516704754.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:34.497Z,1516704754.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:34.877Z,1516704754.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:34.891Z,1516704754.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:35.264Z,1516704755.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:35.295Z,1516704755.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:35.675Z,1516704755.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:35.690Z,1516704755.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:36.072Z,1516704756.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:36.097Z,1516704756.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:36.479Z,1516704756.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:36.500Z,1516704756.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:36.880Z,1516704756.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:36.900Z,1516704756.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:37.275Z,1516704757.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:37.350Z,1516704757.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:37.681Z,1516704757.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:37.709Z,1516704757.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:38.074Z,1516704758.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:38.106Z,1516704758.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:38.468Z,1516704758.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:38.483Z,1516704758.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:38.868Z,1516704758.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:38.883Z,1516704758.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:39.280Z,1516704759.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:39.303Z,1516704759.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:39.681Z,1516704759.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:39.708Z,1516704759.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:40.074Z,1516704760.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:40.089Z,1516704760.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:40.473Z,1516704760.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:40.488Z,1516704760.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:40.871Z,1516704760.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:40.885Z,1516704760.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:41.266Z,1516704761.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:41.306Z,1516704761.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:41.675Z,1516704761.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:41.683Z,1516704761.683 [PNI_TCM](ERROR): CRC does not match. Expected:0x51759 got:0x48356 2018-01-23T10:52:41.724Z,1516704761.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:42.071Z,1516704762.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:42.092Z,1516704762.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:42.472Z,1516704762.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:42.487Z,1516704762.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:42.876Z,1516704762.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:42.894Z,1516704762.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:43.278Z,1516704763.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:43.292Z,1516704763.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:43.673Z,1516704763.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:43.688Z,1516704763.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:44.065Z,1516704764.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:44.092Z,1516704764.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:44.470Z,1516704764.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:44.497Z,1516704764.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:44.870Z,1516704764.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:44.880Z,1516704764.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T10:52:44.897Z,1516704764.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:45.281Z,1516704765.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:45.301Z,1516704765.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:45.684Z,1516704765.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:45.698Z,1516704765.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:46.081Z,1516704766.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:46.099Z,1516704766.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:46.464Z,1516704766.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:46.505Z,1516704766.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:46.882Z,1516704766.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:46.889Z,1516704766.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x32466 got:0x1857 2018-01-23T10:52:46.924Z,1516704766.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:47.269Z,1516704767.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:47.293Z,1516704767.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:47.684Z,1516704767.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:47.701Z,1516704767.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:48.061Z,1516704768.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:48.092Z,1516704768.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:48.477Z,1516704768.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:48.505Z,1516704768.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:48.888Z,1516704768.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:48.902Z,1516704768.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:49.276Z,1516704769.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:49.306Z,1516704769.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:49.658Z,1516704769.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:49.694Z,1516704769.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:50.084Z,1516704770.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:50.105Z,1516704770.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:50.463Z,1516704770.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:50.499Z,1516704770.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:50.862Z,1516704770.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:50.898Z,1516704770.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:51.294Z,1516704771.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:51.309Z,1516704771.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:51.684Z,1516704771.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:51.715Z,1516704771.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:52.073Z,1516704772.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:52.105Z,1516704772.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:52.469Z,1516704772.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:52.520Z,1516704772.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:52.869Z,1516704772.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:52.886Z,1516704772.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:53.263Z,1516704773.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:53.304Z,1516704773.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:53.673Z,1516704773.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:53.693Z,1516704773.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:54.071Z,1516704774.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:54.110Z,1516704774.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:57.175Z,1516704777.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:57.191Z,1516704777.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:57.321Z,1516704777.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:57.342Z,1516704777.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:57.667Z,1516704777.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:57.702Z,1516704777.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:58.057Z,1516704778.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:58.086Z,1516704778.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:58.453Z,1516704778.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:58.483Z,1516704778.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:58.848Z,1516704778.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:58.881Z,1516704778.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:59.273Z,1516704779.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:59.288Z,1516704779.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:52:59.659Z,1516704779.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:52:59.699Z,1516704779.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:00.072Z,1516704780.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:00.090Z,1516704780.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:00.448Z,1516704780.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:00.484Z,1516704780.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:00.852Z,1516704780.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:00.884Z,1516704780.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:01.247Z,1516704781.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:01.286Z,1516704781.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:01.649Z,1516704781.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:01.689Z,1516704781.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.046Z,1516704782.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:02.061Z,1516704782.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.459Z,1516704782.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:02.485Z,1516704782.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.863Z,1516704782.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:02.901Z,1516704782.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.902Z,1516704782.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.903Z,1516704782.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 152 2018-01-23T10:53:02.903Z,1516704782.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:53:02.905Z,1516704782.905 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:02.905Z,1516704782.905 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152 2018-01-23T10:53:02.905Z,1516704782.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:53:02.929Z,1516704782.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:53:02.929Z,1516704782.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:53:03.259Z,1516704783.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:03.290Z,1516704783.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:03.290Z,1516704783.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152 2018-01-23T10:53:03.290Z,1516704783.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:53:03.302Z,1516704783.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:53:03.302Z,1516704783.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:53:03.302Z,1516704783.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 152 2018-01-23T10:53:03.303Z,1516704783.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:53:03.303Z,1516704783.303 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152 2018-01-23T10:53:03.667Z,1516704783.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:03.692Z,1516704783.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:53:03.693Z,1516704783.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:53:03.693Z,1516704783.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:53:03.693Z,1516704783.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:53:03.694Z,1516704783.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:53:03.694Z,1516704783.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:53:03.705Z,1516704783.705 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:53:03.705Z,1516704783.705 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152 2018-01-23T10:53:04.064Z,1516704784.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:04.078Z,1516704784.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:53:04.078Z,1516704784.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:53:04.078Z,1516704784.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:53:04.461Z,1516704784.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:04.476Z,1516704784.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:53:04.477Z,1516704784.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:04.854Z,1516704784.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:04.872Z,1516704784.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:53:04.873Z,1516704784.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:05.262Z,1516704785.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:05.276Z,1516704785.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:53:05.277Z,1516704785.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:05.663Z,1516704785.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:05.678Z,1516704785.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:53:05.679Z,1516704785.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:06.060Z,1516704786.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:06.080Z,1516704786.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:53:06.081Z,1516704786.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:06.457Z,1516704786.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:06.471Z,1516704786.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:53:06.472Z,1516704786.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:06.856Z,1516704786.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:06.871Z,1516704786.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:53:06.872Z,1516704786.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:07.252Z,1516704787.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:07.274Z,1516704787.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:53:07.279Z,1516704787.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:07.658Z,1516704787.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:07.672Z,1516704787.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:53:07.673Z,1516704787.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:08.046Z,1516704788.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:08.077Z,1516704788.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:53:08.078Z,1516704788.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:08.468Z,1516704788.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:08.482Z,1516704788.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:53:08.483Z,1516704788.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:08.874Z,1516704788.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:08.888Z,1516704788.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:53:08.889Z,1516704788.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:09.264Z,1516704789.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:09.286Z,1516704789.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:53:09.291Z,1516704789.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:09.653Z,1516704789.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:09.678Z,1516704789.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:53:09.679Z,1516704789.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:10.048Z,1516704790.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:10.074Z,1516704790.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:53:10.075Z,1516704790.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:10.449Z,1516704790.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:10.475Z,1516704790.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:53:10.476Z,1516704790.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:10.848Z,1516704790.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:10.884Z,1516704790.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:53:10.885Z,1516704790.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:11.272Z,1516704791.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:11.286Z,1516704791.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:53:11.287Z,1516704791.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:11.667Z,1516704791.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:11.681Z,1516704791.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T10:53:11.682Z,1516704791.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:12.063Z,1516704792.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:12.086Z,1516704792.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T10:53:12.087Z,1516704792.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:12.448Z,1516704792.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:12.484Z,1516704792.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T10:53:12.485Z,1516704792.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:12.848Z,1516704792.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:12.884Z,1516704792.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T10:53:12.885Z,1516704792.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:13.248Z,1516704793.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:13.284Z,1516704793.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T10:53:13.285Z,1516704793.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:13.649Z,1516704793.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:13.684Z,1516704793.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T10:53:13.685Z,1516704793.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:14.046Z,1516704794.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:14.069Z,1516704794.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:53:14.070Z,1516704794.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:14.459Z,1516704794.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:14.493Z,1516704794.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:53:14.494Z,1516704794.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:14.872Z,1516704794.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:14.887Z,1516704794.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:53:14.888Z,1516704794.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:15.259Z,1516704795.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:15.292Z,1516704795.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:53:15.293Z,1516704795.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:15.649Z,1516704795.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:15.684Z,1516704795.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:53:15.685Z,1516704795.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:16.048Z,1516704796.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:16.085Z,1516704796.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:53:16.085Z,1516704796.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:16.453Z,1516704796.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:16.484Z,1516704796.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T10:53:16.485Z,1516704796.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:16.848Z,1516704796.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:16.885Z,1516704796.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:53:16.886Z,1516704796.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:17.259Z,1516704797.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:17.293Z,1516704797.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:53:17.294Z,1516704797.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:17.659Z,1516704797.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:17.692Z,1516704797.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:53:17.693Z,1516704797.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:18.059Z,1516704798.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:18.094Z,1516704798.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:53:18.095Z,1516704798.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:18.456Z,1516704798.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:18.482Z,1516704798.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:53:18.483Z,1516704798.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:18.853Z,1516704798.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:18.894Z,1516704798.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T10:53:18.895Z,1516704798.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:19.249Z,1516704799.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:19.284Z,1516704799.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:53:19.285Z,1516704799.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:19.649Z,1516704799.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:19.685Z,1516704799.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:53:19.686Z,1516704799.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:20.046Z,1516704800.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:20.061Z,1516704800.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:53:20.062Z,1516704800.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:20.459Z,1516704800.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:20.485Z,1516704800.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:53:20.486Z,1516704800.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:20.863Z,1516704800.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:20.898Z,1516704800.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:53:20.899Z,1516704800.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:21.259Z,1516704801.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:21.294Z,1516704801.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:53:21.295Z,1516704801.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:21.649Z,1516704801.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:21.684Z,1516704801.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:53:21.685Z,1516704801.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:22.048Z,1516704802.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:22.062Z,1516704802.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:53:22.063Z,1516704802.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:22.457Z,1516704802.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:22.472Z,1516704802.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:53:22.473Z,1516704802.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:22.854Z,1516704802.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:22.869Z,1516704802.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:53:22.870Z,1516704802.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:23.263Z,1516704803.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:23.277Z,1516704803.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:53:23.278Z,1516704803.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:23.659Z,1516704803.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:23.674Z,1516704803.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:24.059Z,1516704804.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:24.074Z,1516704804.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:24.456Z,1516704804.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:24.482Z,1516704804.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:24.858Z,1516704804.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:24.873Z,1516704804.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:25.252Z,1516704805.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:25.274Z,1516704805.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:25.649Z,1516704805.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:25.685Z,1516704805.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:26.050Z,1516704806.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:26.087Z,1516704806.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:26.475Z,1516704806.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:26.490Z,1516704806.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:26.873Z,1516704806.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:26.887Z,1516704806.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:27.264Z,1516704807.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:27.295Z,1516704807.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:27.665Z,1516704807.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:27.680Z,1516704807.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:28.049Z,1516704808.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:28.083Z,1516704808.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:28.453Z,1516704808.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:28.482Z,1516704808.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:28.848Z,1516704808.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:28.887Z,1516704808.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:29.270Z,1516704809.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:29.285Z,1516704809.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:29.669Z,1516704809.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:29.710Z,1516704809.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:30.068Z,1516704810.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:30.084Z,1516704810.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:30.448Z,1516704810.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:30.485Z,1516704810.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:30.848Z,1516704810.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:30.874Z,1516704810.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:31.248Z,1516704811.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:31.282Z,1516704811.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:31.649Z,1516704811.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:31.685Z,1516704811.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:32.046Z,1516704812.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:32.069Z,1516704812.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:32.467Z,1516704812.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:32.482Z,1516704812.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:32.872Z,1516704812.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:32.886Z,1516704812.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:33.263Z,1516704813.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:33.285Z,1516704813.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:33.649Z,1516704813.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:33.681Z,1516704813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:34.047Z,1516704814.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:34.085Z,1516704814.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:34.449Z,1516704814.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:34.484Z,1516704814.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:34.848Z,1516704814.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:34.880Z,1516704814.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:35.269Z,1516704815.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:35.283Z,1516704815.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:35.671Z,1516704815.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:35.686Z,1516704815.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:36.063Z,1516704816.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:36.086Z,1516704816.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:36.448Z,1516704816.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:36.481Z,1516704816.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:36.848Z,1516704816.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:36.880Z,1516704816.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:37.248Z,1516704817.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:37.280Z,1516704817.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:37.649Z,1516704817.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:37.685Z,1516704817.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:38.046Z,1516704818.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:38.069Z,1516704818.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:38.472Z,1516704818.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:38.487Z,1516704818.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:38.872Z,1516704818.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:38.893Z,1516704818.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:39.259Z,1516704819.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:39.293Z,1516704819.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:39.653Z,1516704819.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:39.684Z,1516704819.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:40.048Z,1516704820.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:40.085Z,1516704820.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:40.449Z,1516704820.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:40.476Z,1516704820.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:40.847Z,1516704820.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:40.885Z,1516704820.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:41.259Z,1516704821.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:41.294Z,1516704821.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:41.663Z,1516704821.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:41.694Z,1516704821.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:42.067Z,1516704822.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:42.100Z,1516704822.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:42.460Z,1516704822.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:42.475Z,1516704822.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:42.856Z,1516704822.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:42.877Z,1516704822.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:43.253Z,1516704823.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:43.268Z,1516704823.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:43.661Z,1516704823.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:43.676Z,1516704823.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:44.049Z,1516704824.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:44.069Z,1516704824.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:44.467Z,1516704824.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:44.500Z,1516704824.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:44.875Z,1516704824.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:44.899Z,1516704824.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:45.263Z,1516704825.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:45.278Z,1516704825.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:45.658Z,1516704825.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:45.677Z,1516704825.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:46.057Z,1516704826.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:46.071Z,1516704826.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:46.456Z,1516704826.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:46.471Z,1516704826.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:46.852Z,1516704826.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:46.875Z,1516704826.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:47.262Z,1516704827.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:47.277Z,1516704827.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:47.661Z,1516704827.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:47.681Z,1516704827.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:48.064Z,1516704828.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:48.078Z,1516704828.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:48.453Z,1516704828.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:48.481Z,1516704828.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:48.860Z,1516704828.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:48.881Z,1516704828.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:49.262Z,1516704829.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:49.281Z,1516704829.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:49.663Z,1516704829.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:49.684Z,1516704829.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:50.062Z,1516704830.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:50.081Z,1516704830.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:50.456Z,1516704830.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:50.474Z,1516704830.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:50.857Z,1516704830.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:50.872Z,1516704830.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:51.261Z,1516704831.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:51.281Z,1516704831.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:51.665Z,1516704831.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:51.706Z,1516704831.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:52.059Z,1516704832.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:52.086Z,1516704832.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:52.449Z,1516704832.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:52.464Z,1516704832.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:52.848Z,1516704832.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:52.869Z,1516704832.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:53.267Z,1516704833.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:53.294Z,1516704833.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:53.663Z,1516704833.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:53.694Z,1516704833.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:54.067Z,1516704834.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:54.101Z,1516704834.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:54.462Z,1516704834.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:54.477Z,1516704834.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:57.549Z,1516704837.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:57.565Z,1516704837.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:57.683Z,1516704837.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:57.725Z,1516704837.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:58.027Z,1516704838.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:58.052Z,1516704838.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:58.443Z,1516704838.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:58.458Z,1516704838.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:58.816Z,1516704838.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:58.831Z,1516704838.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:59.219Z,1516704839.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:59.257Z,1516704839.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:53:59.616Z,1516704839.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:53:59.630Z,1516704839.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:00.010Z,1516704840.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:00.041Z,1516704840.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:00.431Z,1516704840.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:00.446Z,1516704840.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:00.824Z,1516704840.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:00.838Z,1516704840.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:01.224Z,1516704841.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:01.239Z,1516704841.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:01.613Z,1516704841.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:01.644Z,1516704841.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:02.023Z,1516704842.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:02.038Z,1516704842.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:02.411Z,1516704842.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:02.449Z,1516704842.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:02.825Z,1516704842.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:02.840Z,1516704842.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:03.210Z,1516704843.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:03.246Z,1516704843.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:03.624Z,1516704843.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:03.652Z,1516704843.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:04.028Z,1516704844.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:04.055Z,1516704844.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:04.431Z,1516704844.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:04.445Z,1516704844.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:04.809Z,1516704844.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:04.844Z,1516704844.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:05.215Z,1516704845.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:05.253Z,1516704845.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:05.609Z,1516704845.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:05.644Z,1516704845.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:06.006Z,1516704846.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:06.030Z,1516704846.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:06.436Z,1516704846.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:06.453Z,1516704846.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:06.831Z,1516704846.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:06.860Z,1516704846.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:07.219Z,1516704847.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:07.254Z,1516704847.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:07.609Z,1516704847.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:07.623Z,1516704847.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:08.009Z,1516704848.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:08.023Z,1516704848.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:08.411Z,1516704848.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:08.426Z,1516704848.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:08.817Z,1516704848.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:08.832Z,1516704848.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:09.213Z,1516704849.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:09.228Z,1516704849.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:09.620Z,1516704849.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:09.635Z,1516704849.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:10.023Z,1516704850.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:10.038Z,1516704850.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:10.419Z,1516704850.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:10.440Z,1516704850.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:10.817Z,1516704850.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:10.837Z,1516704850.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:11.213Z,1516704851.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:11.240Z,1516704851.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:11.622Z,1516704851.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:11.637Z,1516704851.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:12.006Z,1516704852.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:12.034Z,1516704852.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:12.428Z,1516704852.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:12.443Z,1516704852.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:12.831Z,1516704852.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:12.846Z,1516704852.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:13.224Z,1516704853.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:13.245Z,1516704853.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:13.609Z,1516704853.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:13.641Z,1516704853.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:14.008Z,1516704854.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:14.043Z,1516704854.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:14.406Z,1516704854.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:14.442Z,1516704854.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:14.825Z,1516704854.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:14.840Z,1516704854.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:15.209Z,1516704855.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:15.243Z,1516704855.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:15.624Z,1516704855.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:15.648Z,1516704855.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:16.031Z,1516704856.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:16.046Z,1516704856.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:16.426Z,1516704856.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:16.453Z,1516704856.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:16.809Z,1516704856.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:16.841Z,1516704856.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:17.208Z,1516704857.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:17.241Z,1516704857.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:17.609Z,1516704857.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:17.644Z,1516704857.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:18.006Z,1516704858.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:18.029Z,1516704858.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:18.427Z,1516704858.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:18.442Z,1516704858.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:18.831Z,1516704858.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:18.846Z,1516704858.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:19.223Z,1516704859.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:19.245Z,1516704859.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:19.608Z,1516704859.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:19.641Z,1516704859.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:20.013Z,1516704860.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:20.045Z,1516704860.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:20.406Z,1516704860.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:20.422Z,1516704860.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:20.809Z,1516704860.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:20.824Z,1516704860.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:21.208Z,1516704861.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:21.223Z,1516704861.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:21.623Z,1516704861.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:21.660Z,1516704861.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:22.031Z,1516704862.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:22.065Z,1516704862.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:22.431Z,1516704862.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:22.457Z,1516704862.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:22.817Z,1516704862.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:22.853Z,1516704862.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:23.217Z,1516704863.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:23.232Z,1516704863.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:23.614Z,1516704863.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:23.643Z,1516704863.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:24.012Z,1516704864.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:24.031Z,1516704864.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:24.423Z,1516704864.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:24.447Z,1516704864.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:24.460Z,1516704864.460 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T10:54:24.835Z,1516704864.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:24.861Z,1516704864.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:25.220Z,1516704865.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:25.235Z,1516704865.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:25.613Z,1516704865.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:25.636Z,1516704865.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:26.018Z,1516704866.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:26.032Z,1516704866.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:26.412Z,1516704866.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:26.439Z,1516704866.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:26.820Z,1516704866.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:26.837Z,1516704866.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:27.218Z,1516704867.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:27.233Z,1516704867.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:27.621Z,1516704867.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:27.641Z,1516704867.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:28.027Z,1516704868.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:28.042Z,1516704868.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:28.423Z,1516704868.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:28.438Z,1516704868.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:28.821Z,1516704868.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:28.841Z,1516704868.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:29.220Z,1516704869.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:29.241Z,1516704869.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:29.618Z,1516704869.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:29.633Z,1516704869.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:30.016Z,1516704870.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:30.031Z,1516704870.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:30.422Z,1516704870.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:30.441Z,1516704870.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:30.823Z,1516704870.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:30.838Z,1516704870.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:31.221Z,1516704871.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:31.240Z,1516704871.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:31.616Z,1516704871.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:31.631Z,1516704871.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:32.013Z,1516704872.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:32.040Z,1516704872.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:32.420Z,1516704872.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:32.441Z,1516704872.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:32.816Z,1516704872.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:32.835Z,1516704872.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:33.212Z,1516704873.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:33.238Z,1516704873.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:33.627Z,1516704873.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:33.642Z,1516704873.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:34.030Z,1516704874.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:34.053Z,1516704874.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:34.431Z,1516704874.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:34.453Z,1516704874.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:34.817Z,1516704874.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:34.832Z,1516704874.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:35.211Z,1516704875.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:35.244Z,1516704875.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:35.613Z,1516704875.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:35.643Z,1516704875.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:36.012Z,1516704876.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:36.035Z,1516704876.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:36.432Z,1516704876.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:36.447Z,1516704876.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:36.831Z,1516704876.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:36.853Z,1516704876.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:37.230Z,1516704877.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:37.245Z,1516704877.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:37.612Z,1516704877.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:37.634Z,1516704877.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:38.012Z,1516704878.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:38.044Z,1516704878.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:38.411Z,1516704878.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:38.444Z,1516704878.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:38.813Z,1516704878.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:38.840Z,1516704878.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:39.209Z,1516704879.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:39.237Z,1516704879.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:39.624Z,1516704879.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:39.651Z,1516704879.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:40.033Z,1516704880.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:40.048Z,1516704880.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:40.436Z,1516704880.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:40.457Z,1516704880.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:40.809Z,1516704880.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:40.836Z,1516704880.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:41.217Z,1516704881.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:41.245Z,1516704881.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:41.611Z,1516704881.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:41.638Z,1516704881.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:42.011Z,1516704882.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:42.042Z,1516704882.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:42.421Z,1516704882.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:42.456Z,1516704882.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:42.824Z,1516704882.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:42.863Z,1516704882.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:43.221Z,1516704883.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:43.253Z,1516704883.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:43.609Z,1516704883.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:43.626Z,1516704883.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:44.009Z,1516704884.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:44.025Z,1516704884.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:44.418Z,1516704884.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:44.434Z,1516704884.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:44.822Z,1516704884.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:44.855Z,1516704884.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:45.216Z,1516704885.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:45.232Z,1516704885.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:45.624Z,1516704885.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:45.642Z,1516704885.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:46.032Z,1516704886.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:46.064Z,1516704886.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:46.436Z,1516704886.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:46.472Z,1516704886.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:46.812Z,1516704886.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:46.845Z,1516704886.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:47.220Z,1516704887.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:47.241Z,1516704887.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:47.622Z,1516704887.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:47.637Z,1516704887.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:48.013Z,1516704888.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:48.034Z,1516704888.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:48.426Z,1516704888.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:48.441Z,1516704888.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:48.826Z,1516704888.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:48.841Z,1516704888.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:49.226Z,1516704889.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:49.241Z,1516704889.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:49.612Z,1516704889.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:49.634Z,1516704889.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:50.017Z,1516704890.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:50.031Z,1516704890.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:50.417Z,1516704890.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:50.437Z,1516704890.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:50.816Z,1516704890.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:50.835Z,1516704890.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:51.217Z,1516704891.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:51.231Z,1516704891.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:51.626Z,1516704891.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:51.647Z,1516704891.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:52.026Z,1516704892.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:52.045Z,1516704892.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:52.427Z,1516704892.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:52.448Z,1516704892.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:52.821Z,1516704892.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:52.841Z,1516704892.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:53.221Z,1516704893.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:53.236Z,1516704893.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:53.618Z,1516704893.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:53.633Z,1516704893.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:54.018Z,1516704894.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:54.033Z,1516704894.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:54.422Z,1516704894.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:54.449Z,1516704894.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:54.831Z,1516704894.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:54.845Z,1516704894.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:57.932Z,1516704897.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:57.947Z,1516704897.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:58.053Z,1516704898.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:58.097Z,1516704898.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:58.420Z,1516704898.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:58.435Z,1516704898.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:58.821Z,1516704898.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:58.845Z,1516704898.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:59.206Z,1516704899.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:59.237Z,1516704899.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:54:59.631Z,1516704899.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:54:59.646Z,1516704899.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:00.030Z,1516704900.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:00.049Z,1516704900.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:00.424Z,1516704900.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:00.445Z,1516704900.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:00.808Z,1516704900.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:00.841Z,1516704900.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:01.208Z,1516704901.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:01.243Z,1516704901.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:01.609Z,1516704901.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:01.636Z,1516704901.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:02.008Z,1516704902.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:02.041Z,1516704902.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:02.428Z,1516704902.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:02.442Z,1516704902.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:02.831Z,1516704902.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:02.846Z,1516704902.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:03.224Z,1516704903.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:03.251Z,1516704903.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:03.613Z,1516704903.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:03.645Z,1516704903.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:04.006Z,1516704904.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:04.045Z,1516704904.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:04.412Z,1516704904.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:04.438Z,1516704904.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:04.810Z,1516704904.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:04.841Z,1516704904.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:05.206Z,1516704905.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:05.229Z,1516704905.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:05.619Z,1516704905.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:05.657Z,1516704905.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:06.032Z,1516704906.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:06.050Z,1516704906.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:06.427Z,1516704906.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:06.458Z,1516704906.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:06.808Z,1516704906.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:06.845Z,1516704906.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:07.209Z,1516704907.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:07.249Z,1516704907.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:07.613Z,1516704907.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:07.648Z,1516704907.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:08.008Z,1516704908.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:08.045Z,1516704908.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:08.419Z,1516704908.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:08.458Z,1516704908.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:08.832Z,1516704908.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:08.847Z,1516704908.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:09.219Z,1516704909.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:09.253Z,1516704909.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:09.609Z,1516704909.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:09.646Z,1516704909.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:10.008Z,1516704910.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:10.045Z,1516704910.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:10.408Z,1516704910.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:10.445Z,1516704910.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:10.809Z,1516704910.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:10.837Z,1516704910.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:11.212Z,1516704911.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:11.248Z,1516704911.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:11.619Z,1516704911.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:11.645Z,1516704911.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:12.023Z,1516704912.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:12.062Z,1516704912.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:12.419Z,1516704912.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:12.454Z,1516704912.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:12.808Z,1516704912.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:12.849Z,1516704912.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:13.213Z,1516704913.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:13.253Z,1516704913.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:13.614Z,1516704913.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:13.629Z,1516704913.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:14.013Z,1516704914.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:14.033Z,1516704914.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:14.424Z,1516704914.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:14.439Z,1516704914.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:14.832Z,1516704914.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:14.861Z,1516704914.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:15.219Z,1516704915.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:15.234Z,1516704915.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:15.616Z,1516704915.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:15.639Z,1516704915.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:16.016Z,1516704916.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:16.031Z,1516704916.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:16.412Z,1516704916.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:16.430Z,1516704916.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:16.813Z,1516704916.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:16.843Z,1516704916.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:17.212Z,1516704917.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:17.234Z,1516704917.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:17.626Z,1516704917.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:17.654Z,1516704917.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:18.036Z,1516704918.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:18.051Z,1516704918.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:18.424Z,1516704918.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:18.446Z,1516704918.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:18.808Z,1516704918.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:18.841Z,1516704918.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:19.213Z,1516704919.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:19.241Z,1516704919.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:19.610Z,1516704919.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:19.641Z,1516704919.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:20.013Z,1516704920.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:20.049Z,1516704920.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:20.438Z,1516704920.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:20.453Z,1516704920.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:20.823Z,1516704920.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:20.862Z,1516704920.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:21.221Z,1516704921.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:21.256Z,1516704921.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:21.610Z,1516704921.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:21.626Z,1516704921.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:22.009Z,1516704922.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:22.049Z,1516704922.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:22.418Z,1516704922.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:22.433Z,1516704922.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:22.818Z,1516704922.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:22.834Z,1516704922.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:23.214Z,1516704923.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:23.231Z,1516704923.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:23.620Z,1516704923.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:23.637Z,1516704923.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:24.024Z,1516704924.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:24.040Z,1516704924.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:24.420Z,1516704924.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:24.436Z,1516704924.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:24.814Z,1516704924.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:24.847Z,1516704924.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:25.217Z,1516704925.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:25.231Z,1516704925.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:25.612Z,1516704925.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:25.640Z,1516704925.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:26.012Z,1516704926.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:26.033Z,1516704926.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:26.428Z,1516704926.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:26.443Z,1516704926.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:26.830Z,1516704926.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:26.849Z,1516704926.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:27.230Z,1516704927.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:27.253Z,1516704927.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:27.608Z,1516704927.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:27.635Z,1516704927.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:28.008Z,1516704928.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:28.041Z,1516704928.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:28.408Z,1516704928.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:28.441Z,1516704928.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:28.809Z,1516704928.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:28.844Z,1516704928.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:29.220Z,1516704929.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:29.238Z,1516704929.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:29.627Z,1516704929.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:29.642Z,1516704929.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:30.031Z,1516704930.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:30.046Z,1516704930.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:30.427Z,1516704930.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:30.442Z,1516704930.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:30.808Z,1516704930.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:30.841Z,1516704930.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:31.208Z,1516704931.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:31.243Z,1516704931.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:31.621Z,1516704931.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:31.636Z,1516704931.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:32.008Z,1516704932.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:32.044Z,1516704932.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:32.428Z,1516704932.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:32.442Z,1516704932.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:32.831Z,1516704932.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:32.846Z,1516704932.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:33.234Z,1516704933.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:33.253Z,1516704933.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:33.609Z,1516704933.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:33.635Z,1516704933.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:34.019Z,1516704934.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:34.039Z,1516704934.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:34.424Z,1516704934.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:34.445Z,1516704934.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:34.832Z,1516704934.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:34.846Z,1516704934.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:35.226Z,1516704935.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:35.249Z,1516704935.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:35.609Z,1516704935.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:35.641Z,1516704935.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:36.008Z,1516704936.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:36.043Z,1516704936.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:36.435Z,1516704936.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:36.450Z,1516704936.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:36.828Z,1516704936.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:36.848Z,1516704936.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:37.229Z,1516704937.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:37.243Z,1516704937.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:37.609Z,1516704937.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:37.645Z,1516704937.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:38.008Z,1516704938.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:38.044Z,1516704938.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:38.429Z,1516704938.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:38.443Z,1516704938.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:38.834Z,1516704938.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:38.849Z,1516704938.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:39.227Z,1516704939.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:39.242Z,1516704939.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:39.609Z,1516704939.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:39.641Z,1516704939.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:40.013Z,1516704940.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:40.038Z,1516704940.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:40.427Z,1516704940.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:40.442Z,1516704940.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:40.831Z,1516704940.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:40.846Z,1516704940.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:41.231Z,1516704941.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:41.246Z,1516704941.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:41.609Z,1516704941.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:41.636Z,1516704941.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:42.012Z,1516704942.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:42.046Z,1516704942.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:42.431Z,1516704942.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:42.446Z,1516704942.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:42.831Z,1516704942.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:42.846Z,1516704942.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:43.219Z,1516704943.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:43.254Z,1516704943.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:43.613Z,1516704943.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:43.645Z,1516704943.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:44.008Z,1516704944.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:44.045Z,1516704944.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:44.419Z,1516704944.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:44.447Z,1516704944.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:44.835Z,1516704944.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:44.850Z,1516704944.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:45.219Z,1516704945.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:45.253Z,1516704945.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:45.609Z,1516704945.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:45.655Z,1516704945.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:46.012Z,1516704946.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:46.044Z,1516704946.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:46.431Z,1516704946.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:46.446Z,1516704946.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:46.832Z,1516704946.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:46.853Z,1516704946.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:47.231Z,1516704947.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:47.246Z,1516704947.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:47.609Z,1516704947.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:47.636Z,1516704947.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:48.008Z,1516704948.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:48.023Z,1516704948.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:48.419Z,1516704948.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:48.455Z,1516704948.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:48.842Z,1516704948.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:48.857Z,1516704948.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:49.226Z,1516704949.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:49.257Z,1516704949.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:49.621Z,1516704949.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:49.656Z,1516704949.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:50.016Z,1516704950.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:50.037Z,1516704950.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:50.423Z,1516704950.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:50.438Z,1516704950.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:50.831Z,1516704950.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:50.863Z,1516704950.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:51.223Z,1516704951.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:51.238Z,1516704951.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:51.617Z,1516704951.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:51.631Z,1516704951.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:52.021Z,1516704952.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:52.037Z,1516704952.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:52.431Z,1516704952.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:52.462Z,1516704952.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:52.823Z,1516704952.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:52.837Z,1516704952.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:53.232Z,1516704953.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:53.262Z,1516704953.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:53.266Z,1516704953.266 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T10:50:53.1Z 2018-01-23T10:55:53.266Z,1516704953.266 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T10:55:53.266Z,1516704953.266 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T10:55:53.620Z,1516704953.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:53.682Z,1516704953.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:54.327Z,1516704954.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:54.342Z,1516704954.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:54.545Z,1516704954.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:54.597Z,1516704954.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:55:59.953Z,1516704959.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:55:59.977Z,1516704959.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:00.067Z,1516704960.067 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0180.lzma 2018-01-23T10:56:00.101Z,1516704960.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:00.160Z,1516704960.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:00.467Z,1516704960.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:00.511Z,1516704960.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:00.817Z,1516704960.817 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0180.lzma.bak 2018-01-23T10:56:00.818Z,1516704960.818 [DataOverHttps](INFO): SBD MOMSN=7755457 2018-01-23T10:56:00.844Z,1516704960.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:00.904Z,1516704960.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:01.709Z,1516704961.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:01.749Z,1516704961.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:01.882Z,1516704961.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:01.931Z,1516704961.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:08.536Z,1516704968.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:08.553Z,1516704968.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:08.553Z,1516704968.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153 2018-01-23T10:56:08.553Z,1516704968.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:56:08.555Z,1516704968.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:08.555Z,1516704968.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 153 2018-01-23T10:56:08.555Z,1516704968.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:56:08.588Z,1516704968.588 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:08.588Z,1516704968.588 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153 2018-01-23T10:56:08.588Z,1516704968.588 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:56:08.626Z,1516704968.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:56:08.626Z,1516704968.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:56:08.627Z,1516704968.627 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:56:08.693Z,1516704968.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:08.785Z,1516704968.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:56:08.785Z,1516704968.785 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153 2018-01-23T10:56:08.785Z,1516704968.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:56:08.786Z,1516704968.786 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 153 2018-01-23T10:56:08.786Z,1516704968.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:56:08.786Z,1516704968.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153 2018-01-23T10:56:09.065Z,1516704969.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:09.100Z,1516704969.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:56:09.100Z,1516704969.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:56:09.101Z,1516704969.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:56:09.101Z,1516704969.101 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:56:09.102Z,1516704969.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:56:09.102Z,1516704969.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:56:09.102Z,1516704969.102 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:56:09.111Z,1516704969.111 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:56:09.111Z,1516704969.111 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:56:09.466Z,1516704969.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:09.534Z,1516704969.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s. 2018-01-23T10:56:09.535Z,1516704969.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:09.864Z,1516704969.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:09.902Z,1516704969.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T10:56:09.907Z,1516704969.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:10.267Z,1516704970.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:10.301Z,1516704970.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T10:56:10.302Z,1516704970.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:14.385Z,1516704974.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:14.400Z,1516704974.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s. 2018-01-23T10:56:14.401Z,1516704974.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:14.482Z,1516704974.482 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0181.lzma 2018-01-23T10:56:14.516Z,1516704974.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:14.548Z,1516704974.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:56:14.549Z,1516704974.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:14.864Z,1516704974.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:14.878Z,1516704974.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T10:56:14.891Z,1516704974.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:15.229Z,1516704975.229 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0181.lzma.bak 2018-01-23T10:56:15.229Z,1516704975.229 [DataOverHttps](INFO): SBD MOMSN=7755459 2018-01-23T10:56:15.267Z,1516704975.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:15.281Z,1516704975.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T10:56:15.282Z,1516704975.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:15.895Z,1516704975.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:15.910Z,1516704975.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s. 2018-01-23T10:56:15.911Z,1516704975.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:15.914Z,1516704975.914 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T10:56:15.914Z,1516704975.914 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T10:56:15.914Z,1516704975.914 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T10:56:16.059Z,1516704976.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:16.073Z,1516704976.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T10:56:16.074Z,1516704976.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:19.160Z,1516704979.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:19.174Z,1516704979.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s. 2018-01-23T10:56:19.175Z,1516704979.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:19.288Z,1516704979.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:19.319Z,1516704979.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T10:56:19.320Z,1516704979.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:19.662Z,1516704979.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:19.680Z,1516704979.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T10:56:19.681Z,1516704979.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:20.060Z,1516704980.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:20.074Z,1516704980.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T10:56:20.075Z,1516704980.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:20.452Z,1516704980.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:20.472Z,1516704980.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T10:56:20.473Z,1516704980.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:20.853Z,1516704980.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:20.876Z,1516704980.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T10:56:20.877Z,1516704980.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:21.257Z,1516704981.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:21.276Z,1516704981.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T10:56:21.277Z,1516704981.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:21.667Z,1516704981.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:21.688Z,1516704981.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T10:56:21.689Z,1516704981.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:22.071Z,1516704982.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:22.092Z,1516704982.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T10:56:22.093Z,1516704982.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:22.475Z,1516704982.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:22.496Z,1516704982.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T10:56:22.497Z,1516704982.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:22.859Z,1516704982.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:22.874Z,1516704982.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T10:56:22.875Z,1516704982.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:23.264Z,1516704983.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:23.281Z,1516704983.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T10:56:23.281Z,1516704983.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:23.650Z,1516704983.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:23.680Z,1516704983.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T10:56:23.681Z,1516704983.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:24.050Z,1516704984.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:24.077Z,1516704984.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T10:56:24.078Z,1516704984.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:24.460Z,1516704984.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:24.492Z,1516704984.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T10:56:24.493Z,1516704984.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:24.871Z,1516704984.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:24.896Z,1516704984.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T10:56:24.897Z,1516704984.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:25.259Z,1516704985.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:25.292Z,1516704985.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T10:56:25.293Z,1516704985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:25.657Z,1516704985.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:25.683Z,1516704985.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T10:56:25.684Z,1516704985.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:26.049Z,1516704986.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:26.079Z,1516704986.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T10:56:26.080Z,1516704986.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:26.459Z,1516704986.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:26.494Z,1516704986.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T10:56:26.496Z,1516704986.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:26.863Z,1516704986.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:26.900Z,1516704986.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T10:56:26.901Z,1516704986.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:27.271Z,1516704987.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:27.297Z,1516704987.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T10:56:27.298Z,1516704987.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:27.666Z,1516704987.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:27.694Z,1516704987.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T10:56:27.695Z,1516704987.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:28.059Z,1516704988.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:28.094Z,1516704988.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T10:56:28.095Z,1516704988.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:28.471Z,1516704988.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:28.497Z,1516704988.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T10:56:28.498Z,1516704988.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:28.882Z,1516704988.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:28.897Z,1516704988.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:29.271Z,1516704989.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:29.301Z,1516704989.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:29.662Z,1516704989.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:29.696Z,1516704989.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:30.053Z,1516704990.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:30.068Z,1516704990.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:30.467Z,1516704990.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:30.492Z,1516704990.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:30.871Z,1516704990.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:30.901Z,1516704990.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:31.263Z,1516704991.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:31.290Z,1516704991.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:31.657Z,1516704991.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:31.672Z,1516704991.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:32.058Z,1516704992.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:32.085Z,1516704992.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:32.471Z,1516704992.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:32.501Z,1516704992.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:32.875Z,1516704992.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:32.897Z,1516704992.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:33.259Z,1516704993.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:33.274Z,1516704993.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:33.658Z,1516704993.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:33.714Z,1516704993.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:34.063Z,1516704994.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:34.078Z,1516704994.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:34.465Z,1516704994.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:34.480Z,1516704994.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:34.867Z,1516704994.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:34.882Z,1516704994.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:35.267Z,1516704995.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:35.285Z,1516704995.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:35.672Z,1516704995.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:35.687Z,1516704995.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:36.065Z,1516704996.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:36.080Z,1516704996.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:36.452Z,1516704996.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:36.474Z,1516704996.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:36.853Z,1516704996.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:36.877Z,1516704996.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:37.290Z,1516704997.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:37.316Z,1516704997.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:37.672Z,1516704997.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:37.687Z,1516704997.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:38.067Z,1516704998.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:38.148Z,1516704998.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:38.464Z,1516704998.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:38.481Z,1516704998.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:38.855Z,1516704998.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:38.869Z,1516704998.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:39.252Z,1516704999.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:39.267Z,1516704999.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:39.652Z,1516704999.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:39.667Z,1516704999.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:40.091Z,1516705000.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:40.125Z,1516705000.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:40.454Z,1516705000.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:40.469Z,1516705000.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:40.868Z,1516705000.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:40.883Z,1516705000.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:41.280Z,1516705001.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:41.294Z,1516705001.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:41.669Z,1516705001.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:41.689Z,1516705001.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:42.052Z,1516705002.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:42.068Z,1516705002.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:42.456Z,1516705002.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:42.472Z,1516705002.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:42.858Z,1516705002.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:42.900Z,1516705002.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:43.251Z,1516705003.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:43.277Z,1516705003.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:43.664Z,1516705003.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:43.685Z,1516705003.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:44.068Z,1516705004.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:44.091Z,1516705004.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:44.469Z,1516705004.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:44.501Z,1516705004.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:44.861Z,1516705004.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:44.876Z,1516705004.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:45.259Z,1516705005.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:45.274Z,1516705005.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:45.656Z,1516705005.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:45.684Z,1516705005.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:46.064Z,1516705006.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:46.080Z,1516705006.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:46.459Z,1516705006.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:46.476Z,1516705006.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:46.865Z,1516705006.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:46.890Z,1516705006.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:47.270Z,1516705007.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:47.285Z,1516705007.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:47.671Z,1516705007.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:47.693Z,1516705007.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:48.052Z,1516705008.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:48.085Z,1516705008.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:48.463Z,1516705008.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:48.571Z,1516705008.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:48.864Z,1516705008.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:48.879Z,1516705008.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:49.264Z,1516705009.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:49.285Z,1516705009.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:49.632Z,1516705009.632 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T10:56:49.632Z,1516705009.632 [NAL9602] Data Fault, FailCount= 2 2018-01-23T10:56:49.632Z,1516705009.632 [NAL9602](ERROR): Data Fault 2018-01-23T10:56:49.649Z,1516705009.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:49.692Z,1516705009.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:49.717Z,1516705009.717 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T10:56:50.032Z,1516705010.032 [NAL9602](INFO): Powering down 2018-01-23T10:56:50.050Z,1516705010.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:50.070Z,1516705010.070 [PNI_TCM](ERROR): CRC does not match. Expected:0x61455 got:0x1857 2018-01-23T10:56:50.089Z,1516705010.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:50.450Z,1516705010.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:50.476Z,1516705010.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:50.850Z,1516705010.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:50.884Z,1516705010.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:50.897Z,1516705010.897 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T10:56:50.897Z,1516705010.897 [NAL9602] No Fault, FailCount= 2 2018-01-23T10:56:51.248Z,1516705011.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:51.276Z,1516705011.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:51.664Z,1516705011.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:51.679Z,1516705011.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:52.050Z,1516705012.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:52.076Z,1516705012.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:52.447Z,1516705012.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:52.482Z,1516705012.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:52.860Z,1516705012.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:52.897Z,1516705012.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:53.263Z,1516705013.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:53.271Z,1516705013.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x49166 got:0x1821 2018-01-23T10:56:53.289Z,1516705013.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:53.649Z,1516705013.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:53.685Z,1516705013.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:54.050Z,1516705014.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:54.081Z,1516705014.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:54.448Z,1516705014.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:54.485Z,1516705014.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:54.848Z,1516705014.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:54.871Z,1516705014.871 [PNI_TCM](ERROR): CRC does not match. Expected:0x38093 got:0x63900 2018-01-23T10:56:54.889Z,1516705014.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:55.249Z,1516705015.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:55.285Z,1516705015.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:55.651Z,1516705015.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:55.679Z,1516705015.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:56.045Z,1516705016.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:56.082Z,1516705016.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:56.448Z,1516705016.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:56.484Z,1516705016.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:56.848Z,1516705016.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:56.885Z,1516705016.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:57.250Z,1516705017.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:57.277Z,1516705017.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:57.648Z,1516705017.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:57.696Z,1516705017.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:58.048Z,1516705018.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:58.091Z,1516705018.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:58.445Z,1516705018.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:58.464Z,1516705018.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:58.850Z,1516705018.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:58.866Z,1516705018.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:59.253Z,1516705019.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:59.292Z,1516705019.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:56:59.657Z,1516705019.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:56:59.676Z,1516705019.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:00.058Z,1516705020.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:00.075Z,1516705020.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:00.459Z,1516705020.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:00.484Z,1516705020.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:00.856Z,1516705020.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:00.885Z,1516705020.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:01.256Z,1516705021.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:01.275Z,1516705021.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:01.657Z,1516705021.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:01.675Z,1516705021.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:02.063Z,1516705022.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:02.078Z,1516705022.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:02.460Z,1516705022.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:02.493Z,1516705022.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:02.864Z,1516705022.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:02.883Z,1516705022.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:03.246Z,1516705023.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:03.280Z,1516705023.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:03.652Z,1516705023.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:03.682Z,1516705023.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:04.060Z,1516705024.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:04.089Z,1516705024.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:04.445Z,1516705024.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:04.472Z,1516705024.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:04.848Z,1516705024.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:04.881Z,1516705024.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:05.247Z,1516705025.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:05.284Z,1516705025.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:05.646Z,1516705025.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:05.673Z,1516705025.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:06.060Z,1516705026.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:06.083Z,1516705026.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:06.447Z,1516705026.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:06.483Z,1516705026.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:06.863Z,1516705026.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:06.878Z,1516705026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:07.260Z,1516705027.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:07.298Z,1516705027.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:07.661Z,1516705027.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:07.685Z,1516705027.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:08.045Z,1516705028.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:08.075Z,1516705028.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:08.447Z,1516705028.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:08.485Z,1516705028.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:08.852Z,1516705028.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:08.878Z,1516705028.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:09.245Z,1516705029.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:09.276Z,1516705029.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:09.649Z,1516705029.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:09.679Z,1516705029.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:10.048Z,1516705030.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:10.085Z,1516705030.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:10.445Z,1516705030.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:10.472Z,1516705030.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:10.848Z,1516705030.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:10.888Z,1516705030.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:11.248Z,1516705031.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:11.288Z,1516705031.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:11.651Z,1516705031.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:11.687Z,1516705031.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:12.052Z,1516705032.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:12.085Z,1516705032.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:12.456Z,1516705032.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:12.483Z,1516705032.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:12.848Z,1516705032.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:12.888Z,1516705032.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:13.252Z,1516705033.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:13.288Z,1516705033.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:13.648Z,1516705033.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:13.684Z,1516705033.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:14.048Z,1516705034.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:14.084Z,1516705034.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:14.448Z,1516705034.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:14.489Z,1516705034.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:14.847Z,1516705034.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:14.862Z,1516705034.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:15.248Z,1516705035.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:15.292Z,1516705035.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:15.653Z,1516705035.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:15.688Z,1516705035.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:16.056Z,1516705036.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:16.094Z,1516705036.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:16.456Z,1516705036.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:16.492Z,1516705036.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:19.563Z,1516705039.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:19.586Z,1516705039.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:19.700Z,1516705039.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:19.715Z,1516705039.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:20.036Z,1516705040.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:20.061Z,1516705040.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:20.412Z,1516705040.412 [NAL9602](INFO): Powering up NAL9602 2018-01-23T10:57:20.439Z,1516705040.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:20.471Z,1516705040.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:20.836Z,1516705040.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:20.852Z,1516705040.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:21.236Z,1516705041.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:21.258Z,1516705041.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:21.625Z,1516705041.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:21.657Z,1516705041.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:22.031Z,1516705042.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:22.065Z,1516705042.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:22.436Z,1516705042.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:22.450Z,1516705042.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:22.836Z,1516705042.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:22.857Z,1516705042.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:23.237Z,1516705043.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:23.252Z,1516705043.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:23.637Z,1516705043.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:23.652Z,1516705043.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:24.036Z,1516705044.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:24.050Z,1516705044.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:24.436Z,1516705044.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:24.451Z,1516705044.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:24.837Z,1516705044.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:24.856Z,1516705044.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:25.225Z,1516705045.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:25.259Z,1516705045.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:25.636Z,1516705045.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:25.651Z,1516705045.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:26.036Z,1516705046.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:26.056Z,1516705046.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:26.425Z,1516705046.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:26.459Z,1516705046.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:26.840Z,1516705046.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:26.855Z,1516705046.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:27.237Z,1516705047.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:27.256Z,1516705047.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:27.625Z,1516705047.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:27.645Z,1516705047.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:28.028Z,1516705048.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:28.056Z,1516705048.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:28.428Z,1516705048.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:28.442Z,1516705048.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:28.828Z,1516705048.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:28.842Z,1516705048.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:29.228Z,1516705049.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:29.243Z,1516705049.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:29.633Z,1516705049.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:29.648Z,1516705049.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:30.029Z,1516705050.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:30.044Z,1516705050.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:30.440Z,1516705050.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:30.455Z,1516705050.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:30.843Z,1516705050.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:30.858Z,1516705050.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:31.217Z,1516705051.217 [NAL9602](INFO): NAL9602 initialized 2018-01-23T10:57:31.234Z,1516705051.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:31.249Z,1516705051.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:31.633Z,1516705051.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:31.657Z,1516705051.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:32.039Z,1516705052.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:32.054Z,1516705052.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:32.439Z,1516705052.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:32.454Z,1516705052.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:32.839Z,1516705052.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:32.861Z,1516705052.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:33.236Z,1516705053.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:33.251Z,1516705053.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:33.637Z,1516705053.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:33.652Z,1516705053.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:34.035Z,1516705054.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:34.050Z,1516705054.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:34.439Z,1516705054.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:34.454Z,1516705054.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:34.851Z,1516705054.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:34.882Z,1516705054.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:35.251Z,1516705055.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:35.266Z,1516705055.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:35.642Z,1516705055.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:35.663Z,1516705055.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:36.032Z,1516705056.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:36.052Z,1516705056.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:36.432Z,1516705056.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:36.465Z,1516705056.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:36.841Z,1516705056.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:36.856Z,1516705056.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:37.243Z,1516705057.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:37.266Z,1516705057.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:37.649Z,1516705057.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:37.669Z,1516705057.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:38.051Z,1516705058.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:38.072Z,1516705058.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:38.426Z,1516705058.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:38.453Z,1516705058.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:38.831Z,1516705058.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:38.863Z,1516705058.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:39.235Z,1516705059.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:39.256Z,1516705059.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:39.627Z,1516705059.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:39.662Z,1516705059.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:40.036Z,1516705060.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:40.054Z,1516705060.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:40.448Z,1516705060.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:40.462Z,1516705060.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:40.850Z,1516705060.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:40.869Z,1516705060.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:41.247Z,1516705061.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:41.262Z,1516705061.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:41.637Z,1516705061.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:41.668Z,1516705061.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:42.026Z,1516705062.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:42.058Z,1516705062.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:42.441Z,1516705062.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:42.456Z,1516705062.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:42.829Z,1516705062.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:42.855Z,1516705062.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:43.244Z,1516705063.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:43.271Z,1516705063.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:43.655Z,1516705063.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:43.670Z,1516705063.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:44.048Z,1516705064.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:44.063Z,1516705064.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:44.426Z,1516705064.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:44.453Z,1516705064.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:44.832Z,1516705064.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:44.858Z,1516705064.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:45.229Z,1516705065.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:45.260Z,1516705065.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:45.627Z,1516705065.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:45.642Z,1516705065.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:46.028Z,1516705066.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:46.065Z,1516705066.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:46.443Z,1516705066.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:46.470Z,1516705066.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:46.847Z,1516705066.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:46.873Z,1516705066.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:47.239Z,1516705067.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:47.266Z,1516705067.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:47.637Z,1516705067.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:47.673Z,1516705067.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:48.032Z,1516705068.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:48.053Z,1516705068.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:48.436Z,1516705068.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:48.451Z,1516705068.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:48.840Z,1516705068.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:48.861Z,1516705068.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:49.251Z,1516705069.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:49.266Z,1516705069.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:49.648Z,1516705069.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:49.663Z,1516705069.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:50.043Z,1516705070.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:50.057Z,1516705070.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:50.437Z,1516705070.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:50.452Z,1516705070.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:50.837Z,1516705070.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:50.852Z,1516705070.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:51.238Z,1516705071.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:51.257Z,1516705071.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:51.636Z,1516705071.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:51.663Z,1516705071.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:52.041Z,1516705072.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:52.061Z,1516705072.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:52.448Z,1516705072.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:52.463Z,1516705072.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:52.851Z,1516705072.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:52.866Z,1516705072.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:53.247Z,1516705073.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:53.262Z,1516705073.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:53.647Z,1516705073.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:53.662Z,1516705073.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:54.036Z,1516705074.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:54.057Z,1516705074.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:54.433Z,1516705074.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:54.463Z,1516705074.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:54.839Z,1516705074.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:54.854Z,1516705074.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:55.248Z,1516705075.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:55.277Z,1516705075.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:55.656Z,1516705075.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:55.671Z,1516705075.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:56.057Z,1516705076.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:56.077Z,1516705076.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:56.430Z,1516705076.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:56.461Z,1516705076.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:56.842Z,1516705076.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:56.858Z,1516705076.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:57.229Z,1516705077.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:57.261Z,1516705077.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:57.634Z,1516705077.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:57.662Z,1516705077.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:58.028Z,1516705078.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:58.058Z,1516705078.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:58.444Z,1516705078.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:58.481Z,1516705078.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:58.857Z,1516705078.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:58.873Z,1516705078.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:59.249Z,1516705079.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:59.265Z,1516705079.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:57:59.629Z,1516705079.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:57:59.667Z,1516705079.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:00.028Z,1516705080.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:00.067Z,1516705080.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:00.429Z,1516705080.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:00.456Z,1516705080.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:00.829Z,1516705080.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:00.873Z,1516705080.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:01.239Z,1516705081.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:01.276Z,1516705081.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:01.643Z,1516705081.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:01.669Z,1516705081.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:02.039Z,1516705082.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:02.066Z,1516705082.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:02.436Z,1516705082.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:02.473Z,1516705082.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:02.833Z,1516705082.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:02.848Z,1516705082.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:03.233Z,1516705083.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:03.252Z,1516705083.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:03.638Z,1516705083.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:03.653Z,1516705083.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:04.035Z,1516705084.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:04.050Z,1516705084.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:04.439Z,1516705084.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:04.454Z,1516705084.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:04.843Z,1516705084.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:04.858Z,1516705084.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:05.251Z,1516705085.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:05.266Z,1516705085.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:05.633Z,1516705085.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:05.656Z,1516705085.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:06.032Z,1516705086.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:06.054Z,1516705086.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:06.437Z,1516705086.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:06.452Z,1516705086.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:06.832Z,1516705086.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:06.850Z,1516705086.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:07.250Z,1516705087.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:07.265Z,1516705087.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:07.650Z,1516705087.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:07.665Z,1516705087.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:08.047Z,1516705088.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:08.062Z,1516705088.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:08.436Z,1516705088.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:08.454Z,1516705088.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:08.837Z,1516705088.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:08.853Z,1516705088.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:09.235Z,1516705089.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:09.258Z,1516705089.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:09.633Z,1516705089.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:09.660Z,1516705089.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:10.028Z,1516705090.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:10.060Z,1516705090.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:10.448Z,1516705090.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:10.465Z,1516705090.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:10.850Z,1516705090.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:10.865Z,1516705090.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:11.242Z,1516705091.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:11.274Z,1516705091.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:11.629Z,1516705091.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:11.666Z,1516705091.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:12.028Z,1516705092.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:12.054Z,1516705092.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:12.429Z,1516705092.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:12.461Z,1516705092.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:12.829Z,1516705092.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:12.855Z,1516705092.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:13.246Z,1516705093.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:13.269Z,1516705093.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:13.655Z,1516705093.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:13.670Z,1516705093.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:14.044Z,1516705094.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:14.066Z,1516705094.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:14.428Z,1516705094.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:14.454Z,1516705094.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:14.828Z,1516705094.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:14.861Z,1516705094.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:15.229Z,1516705095.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:15.266Z,1516705095.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:15.629Z,1516705095.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:15.656Z,1516705095.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:16.028Z,1516705096.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:16.061Z,1516705096.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:16.452Z,1516705096.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:16.467Z,1516705096.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:16.848Z,1516705096.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:16.875Z,1516705096.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:19.949Z,1516705099.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:19.965Z,1516705099.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:20.064Z,1516705100.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:20.112Z,1516705100.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:20.416Z,1516705100.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:20.431Z,1516705100.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:20.821Z,1516705100.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:20.836Z,1516705100.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:21.231Z,1516705101.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:21.262Z,1516705101.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:21.623Z,1516705101.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:21.638Z,1516705101.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:22.019Z,1516705102.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:22.040Z,1516705102.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:22.418Z,1516705102.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:22.433Z,1516705102.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:22.815Z,1516705102.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:22.830Z,1516705102.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:23.216Z,1516705103.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:23.236Z,1516705103.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:23.618Z,1516705103.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:23.633Z,1516705103.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:24.014Z,1516705104.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:24.041Z,1516705104.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:24.423Z,1516705104.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:24.438Z,1516705104.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:24.827Z,1516705104.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:24.842Z,1516705104.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:25.222Z,1516705105.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:25.241Z,1516705105.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:25.617Z,1516705105.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:25.632Z,1516705105.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:26.016Z,1516705106.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:26.031Z,1516705106.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:26.418Z,1516705106.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:26.443Z,1516705106.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:26.817Z,1516705106.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:26.832Z,1516705106.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:27.222Z,1516705107.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:27.241Z,1516705107.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:27.627Z,1516705107.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:27.642Z,1516705107.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:28.024Z,1516705108.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:28.038Z,1516705108.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:28.416Z,1516705108.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:28.449Z,1516705108.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:28.820Z,1516705108.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:28.838Z,1516705108.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:29.208Z,1516705109.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:29.242Z,1516705109.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:29.609Z,1516705109.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:29.642Z,1516705109.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:30.007Z,1516705110.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:30.045Z,1516705110.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:30.430Z,1516705110.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:30.444Z,1516705110.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:30.832Z,1516705110.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:30.847Z,1516705110.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:31.228Z,1516705111.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:31.243Z,1516705111.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:31.609Z,1516705111.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:31.653Z,1516705111.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:32.022Z,1516705112.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:32.037Z,1516705112.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:32.427Z,1516705112.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:32.442Z,1516705112.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:32.809Z,1516705112.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:32.843Z,1516705112.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:33.224Z,1516705113.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:33.247Z,1516705113.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:33.632Z,1516705113.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:33.677Z,1516705113.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:34.027Z,1516705114.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:34.043Z,1516705114.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:34.409Z,1516705114.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:34.452Z,1516705114.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:34.813Z,1516705114.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:34.849Z,1516705114.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:35.209Z,1516705115.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:35.246Z,1516705115.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:35.609Z,1516705115.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:35.637Z,1516705115.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:36.008Z,1516705116.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:36.041Z,1516705116.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:36.428Z,1516705116.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:36.456Z,1516705116.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:36.824Z,1516705116.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:36.851Z,1516705116.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:37.228Z,1516705117.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:37.255Z,1516705117.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:37.609Z,1516705117.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:37.628Z,1516705117.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:38.017Z,1516705118.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:38.053Z,1516705118.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:38.414Z,1516705118.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:38.437Z,1516705118.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:38.816Z,1516705118.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:38.830Z,1516705118.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:39.227Z,1516705119.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:39.262Z,1516705119.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:39.627Z,1516705119.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:39.655Z,1516705119.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:40.019Z,1516705120.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:40.040Z,1516705120.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:40.420Z,1516705120.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:40.441Z,1516705120.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:40.816Z,1516705120.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:40.831Z,1516705120.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:41.223Z,1516705121.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:41.244Z,1516705121.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:41.622Z,1516705121.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:41.641Z,1516705121.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:42.021Z,1516705122.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:42.041Z,1516705122.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:42.418Z,1516705122.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:42.432Z,1516705122.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:42.816Z,1516705122.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:42.831Z,1516705122.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:43.222Z,1516705123.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:43.241Z,1516705123.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:43.627Z,1516705123.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:43.642Z,1516705123.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:44.024Z,1516705124.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:44.038Z,1516705124.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:44.413Z,1516705124.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:44.434Z,1516705124.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:44.817Z,1516705124.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:44.831Z,1516705124.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:45.221Z,1516705125.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:45.241Z,1516705125.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:45.623Z,1516705125.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:45.638Z,1516705125.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:46.022Z,1516705126.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:46.037Z,1516705126.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:46.424Z,1516705126.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:46.445Z,1516705126.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:46.816Z,1516705126.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:46.837Z,1516705126.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:47.226Z,1516705127.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:47.248Z,1516705127.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:47.624Z,1516705127.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:47.651Z,1516705127.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:48.030Z,1516705128.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:48.045Z,1516705128.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:48.418Z,1516705128.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:48.433Z,1516705128.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:48.812Z,1516705128.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:48.834Z,1516705128.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:49.226Z,1516705129.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:49.241Z,1516705129.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:49.630Z,1516705129.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:49.652Z,1516705129.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:50.026Z,1516705130.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:50.041Z,1516705130.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:50.416Z,1516705130.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:50.435Z,1516705130.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:50.818Z,1516705130.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:50.840Z,1516705130.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:51.226Z,1516705131.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:51.241Z,1516705131.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:51.630Z,1516705131.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:51.649Z,1516705131.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:52.028Z,1516705132.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:52.042Z,1516705132.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:52.421Z,1516705132.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:52.436Z,1516705132.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:52.811Z,1516705132.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:52.842Z,1516705132.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:53.228Z,1516705133.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:53.243Z,1516705133.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:53.627Z,1516705133.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:53.642Z,1516705133.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:54.026Z,1516705134.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:54.041Z,1516705134.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:54.418Z,1516705134.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:54.436Z,1516705134.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:54.806Z,1516705134.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:54.833Z,1516705134.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:55.226Z,1516705135.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:55.241Z,1516705135.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:55.630Z,1516705135.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:55.645Z,1516705135.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:56.026Z,1516705136.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:56.041Z,1516705136.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:56.425Z,1516705136.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:56.441Z,1516705136.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:56.815Z,1516705136.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:56.840Z,1516705136.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:57.226Z,1516705137.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:57.242Z,1516705137.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:57.631Z,1516705137.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:57.646Z,1516705137.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:58.028Z,1516705138.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:58.042Z,1516705138.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:58.416Z,1516705138.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:58.436Z,1516705138.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:58.811Z,1516705138.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:58.843Z,1516705138.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:59.228Z,1516705139.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:59.243Z,1516705139.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:58:59.626Z,1516705139.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:58:59.649Z,1516705139.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:00.026Z,1516705140.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:00.041Z,1516705140.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:00.418Z,1516705140.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:00.432Z,1516705140.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:00.812Z,1516705140.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:00.834Z,1516705140.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:01.226Z,1516705141.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:01.241Z,1516705141.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:01.630Z,1516705141.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:01.645Z,1516705141.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:02.026Z,1516705142.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:02.041Z,1516705142.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:02.413Z,1516705142.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:02.435Z,1516705142.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:02.817Z,1516705142.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:02.836Z,1516705142.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:03.227Z,1516705143.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:03.242Z,1516705143.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:03.630Z,1516705143.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:03.645Z,1516705143.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:04.028Z,1516705144.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:04.048Z,1516705144.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:04.421Z,1516705144.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:04.436Z,1516705144.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:04.816Z,1516705144.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:04.843Z,1516705144.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:05.232Z,1516705145.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:05.247Z,1516705145.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:05.624Z,1516705145.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:05.651Z,1516705145.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:06.027Z,1516705146.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:06.042Z,1516705146.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:06.413Z,1516705146.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:06.439Z,1516705146.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:06.813Z,1516705146.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:06.838Z,1516705146.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:07.224Z,1516705147.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:07.245Z,1516705147.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:07.630Z,1516705147.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:07.657Z,1516705147.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:08.028Z,1516705148.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:08.049Z,1516705148.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:08.409Z,1516705148.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:08.436Z,1516705148.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:08.808Z,1516705148.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:08.840Z,1516705148.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:09.228Z,1516705149.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:09.247Z,1516705149.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:09.247Z,1516705149.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154 2018-01-23T10:59:09.247Z,1516705149.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T10:59:09.249Z,1516705149.249 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:09.249Z,1516705149.249 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 154 2018-01-23T10:59:09.249Z,1516705149.249 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T10:59:09.251Z,1516705149.251 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:09.251Z,1516705149.251 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154 2018-01-23T10:59:09.251Z,1516705149.251 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T10:59:09.263Z,1516705149.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T10:59:09.263Z,1516705149.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T10:59:09.263Z,1516705149.263 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T10:59:09.642Z,1516705149.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:09.668Z,1516705149.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T10:59:09.668Z,1516705149.668 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154 2018-01-23T10:59:09.668Z,1516705149.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T10:59:09.668Z,1516705149.668 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 154 2018-01-23T10:59:09.669Z,1516705149.669 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T10:59:09.669Z,1516705149.669 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154 2018-01-23T10:59:10.019Z,1516705150.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:10.053Z,1516705150.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T10:59:10.053Z,1516705150.053 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:59:10.054Z,1516705150.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:59:10.054Z,1516705150.054 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T10:59:10.055Z,1516705150.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:59:10.055Z,1516705150.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:59:10.055Z,1516705150.055 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T10:59:10.056Z,1516705150.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T10:59:10.056Z,1516705150.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T10:59:10.410Z,1516705150.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:10.425Z,1516705150.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T10:59:10.426Z,1516705150.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:10.809Z,1516705150.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:10.828Z,1516705150.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T10:59:10.829Z,1516705150.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:11.224Z,1516705151.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:11.258Z,1516705151.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T10:59:11.259Z,1516705151.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:11.624Z,1516705151.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:11.655Z,1516705151.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T10:59:11.656Z,1516705151.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:12.032Z,1516705152.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:12.056Z,1516705152.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T10:59:12.057Z,1516705152.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:12.421Z,1516705152.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:12.436Z,1516705152.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T10:59:12.437Z,1516705152.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:12.820Z,1516705152.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:12.835Z,1516705152.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T10:59:12.836Z,1516705152.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:13.220Z,1516705153.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:13.237Z,1516705153.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T10:59:13.238Z,1516705153.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:13.624Z,1516705153.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:13.641Z,1516705153.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T10:59:13.642Z,1516705153.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:14.025Z,1516705154.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:14.040Z,1516705154.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T10:59:14.041Z,1516705154.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:14.418Z,1516705154.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:14.436Z,1516705154.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T10:59:14.437Z,1516705154.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:14.818Z,1516705154.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:14.833Z,1516705154.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T10:59:14.834Z,1516705154.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:15.212Z,1516705155.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:15.233Z,1516705155.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T10:59:15.234Z,1516705155.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:15.621Z,1516705155.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:15.637Z,1516705155.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T10:59:15.638Z,1516705155.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:16.026Z,1516705156.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:16.042Z,1516705156.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T10:59:16.043Z,1516705156.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:16.426Z,1516705156.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:16.442Z,1516705156.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T10:59:16.443Z,1516705156.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:16.813Z,1516705156.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:16.831Z,1516705156.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T10:59:16.832Z,1516705156.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:17.218Z,1516705157.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:17.232Z,1516705157.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T10:59:17.233Z,1516705157.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:20.305Z,1516705160.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:20.328Z,1516705160.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T10:59:20.329Z,1516705160.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:20.424Z,1516705160.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:20.456Z,1516705160.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T10:59:20.457Z,1516705160.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:20.784Z,1516705160.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:20.798Z,1516705160.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T10:59:20.799Z,1516705160.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:21.195Z,1516705161.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:21.209Z,1516705161.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T10:59:21.210Z,1516705161.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:21.584Z,1516705161.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:21.598Z,1516705161.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T10:59:21.599Z,1516705161.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:21.976Z,1516705161.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:22.002Z,1516705162.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T10:59:22.007Z,1516705162.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:22.381Z,1516705162.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:22.395Z,1516705162.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T10:59:22.396Z,1516705162.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:22.777Z,1516705162.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:22.799Z,1516705162.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T10:59:22.800Z,1516705162.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:23.176Z,1516705163.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:23.198Z,1516705163.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T10:59:23.199Z,1516705163.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:23.590Z,1516705163.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:23.605Z,1516705163.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T10:59:23.606Z,1516705163.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:23.987Z,1516705163.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:24.010Z,1516705164.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T10:59:24.015Z,1516705164.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:24.391Z,1516705164.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:24.405Z,1516705164.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T10:59:24.406Z,1516705164.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:24.781Z,1516705164.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:24.796Z,1516705164.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T10:59:24.797Z,1516705164.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:25.170Z,1516705165.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:25.197Z,1516705165.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T10:59:25.198Z,1516705165.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:25.573Z,1516705165.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:25.599Z,1516705165.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T10:59:25.600Z,1516705165.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:25.972Z,1516705165.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:26.007Z,1516705166.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T10:59:26.007Z,1516705166.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:26.391Z,1516705166.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:26.412Z,1516705166.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T10:59:26.413Z,1516705166.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:26.796Z,1516705166.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:26.810Z,1516705166.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T10:59:26.811Z,1516705166.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:27.189Z,1516705167.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:27.216Z,1516705167.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T10:59:27.217Z,1516705167.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:27.570Z,1516705167.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:27.597Z,1516705167.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T10:59:27.598Z,1516705167.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:27.976Z,1516705167.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:28.008Z,1516705168.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T10:59:28.009Z,1516705168.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:28.372Z,1516705168.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:28.405Z,1516705168.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T10:59:28.406Z,1516705168.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:28.773Z,1516705168.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:28.804Z,1516705168.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T10:59:28.805Z,1516705168.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:29.172Z,1516705169.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:29.208Z,1516705169.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T10:59:29.209Z,1516705169.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:29.583Z,1516705169.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:29.618Z,1516705169.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:30.003Z,1516705170.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:30.017Z,1516705170.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:30.402Z,1516705170.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:30.416Z,1516705170.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:30.777Z,1516705170.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:30.817Z,1516705170.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:31.173Z,1516705171.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:31.193Z,1516705171.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:31.581Z,1516705171.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:31.596Z,1516705171.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:31.977Z,1516705171.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:31.991Z,1516705171.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:32.391Z,1516705172.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:32.423Z,1516705172.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:32.799Z,1516705172.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:32.829Z,1516705172.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:33.194Z,1516705173.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:33.224Z,1516705173.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:33.573Z,1516705173.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:33.593Z,1516705173.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:33.984Z,1516705173.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:34.001Z,1516705174.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:34.381Z,1516705174.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:34.396Z,1516705174.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:34.778Z,1516705174.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:34.793Z,1516705174.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:35.178Z,1516705175.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:35.197Z,1516705175.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:35.583Z,1516705175.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:35.601Z,1516705175.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:35.996Z,1516705175.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:36.027Z,1516705176.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:36.394Z,1516705176.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:36.409Z,1516705176.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:36.781Z,1516705176.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:36.796Z,1516705176.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:37.176Z,1516705177.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:37.196Z,1516705177.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:37.576Z,1516705177.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:37.609Z,1516705177.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:37.985Z,1516705177.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:38.000Z,1516705178.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:38.391Z,1516705178.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:38.406Z,1516705178.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:38.789Z,1516705178.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:38.809Z,1516705178.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:39.190Z,1516705179.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:39.205Z,1516705179.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:39.577Z,1516705179.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:39.597Z,1516705179.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:39.976Z,1516705179.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:39.998Z,1516705179.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:40.381Z,1516705180.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:40.401Z,1516705180.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:40.781Z,1516705180.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:40.797Z,1516705180.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:41.176Z,1516705181.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:41.194Z,1516705181.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:41.592Z,1516705181.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:41.607Z,1516705181.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:41.994Z,1516705181.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:42.009Z,1516705182.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:42.391Z,1516705182.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:42.413Z,1516705182.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:42.779Z,1516705182.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:42.812Z,1516705182.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:43.170Z,1516705183.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:43.207Z,1516705183.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:43.573Z,1516705183.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:43.605Z,1516705183.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:43.972Z,1516705183.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:44.012Z,1516705184.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:44.396Z,1516705184.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:44.411Z,1516705184.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:44.798Z,1516705184.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:44.813Z,1516705184.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:45.196Z,1516705185.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:45.211Z,1516705185.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:45.571Z,1516705185.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:45.598Z,1516705185.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:45.973Z,1516705185.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:46.006Z,1516705186.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:46.373Z,1516705186.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:46.414Z,1516705186.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:46.774Z,1516705186.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:46.798Z,1516705186.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:47.172Z,1516705187.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:47.209Z,1516705187.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:47.584Z,1516705187.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:47.619Z,1516705187.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:48.008Z,1516705188.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:48.023Z,1516705188.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:48.388Z,1516705188.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:48.419Z,1516705188.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:48.779Z,1516705188.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:48.794Z,1516705188.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:49.181Z,1516705189.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:49.197Z,1516705189.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:49.580Z,1516705189.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:49.601Z,1516705189.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:49.983Z,1516705189.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:49.997Z,1516705189.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:50.385Z,1516705190.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:50.400Z,1516705190.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:50.800Z,1516705190.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:50.826Z,1516705190.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:51.188Z,1516705191.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:51.203Z,1516705191.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:51.580Z,1516705191.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:51.596Z,1516705191.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:51.978Z,1516705191.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:52.005Z,1516705192.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:52.389Z,1516705192.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:52.405Z,1516705192.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:52.781Z,1516705192.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:52.797Z,1516705192.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:53.176Z,1516705193.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:53.194Z,1516705193.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:53.591Z,1516705193.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:53.607Z,1516705193.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:53.995Z,1516705193.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:54.011Z,1516705194.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:54.390Z,1516705194.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:54.405Z,1516705194.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:54.779Z,1516705194.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:54.805Z,1516705194.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:55.170Z,1516705195.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:55.201Z,1516705195.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:55.589Z,1516705195.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:55.604Z,1516705195.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:55.972Z,1516705195.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:56.009Z,1516705196.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:56.388Z,1516705196.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:56.415Z,1516705196.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:56.799Z,1516705196.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:56.814Z,1516705196.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:57.200Z,1516705197.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:57.215Z,1516705197.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:57.574Z,1516705197.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:57.606Z,1516705197.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:57.976Z,1516705197.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:58.002Z,1516705198.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:58.372Z,1516705198.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:58.410Z,1516705198.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:58.781Z,1516705198.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:58.808Z,1516705198.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:59.191Z,1516705199.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:59.206Z,1516705199.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:59.593Z,1516705199.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T10:59:59.608Z,1516705199.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T10:59:59.993Z,1516705199.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:00.013Z,1516705200.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:00.392Z,1516705200.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:00.422Z,1516705200.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:00.780Z,1516705200.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:00.808Z,1516705200.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:01.170Z,1516705201.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:01.193Z,1516705201.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:01.573Z,1516705201.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:01.600Z,1516705201.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:01.978Z,1516705201.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:02.017Z,1516705202.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:02.387Z,1516705202.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:02.421Z,1516705202.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:02.803Z,1516705202.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:02.825Z,1516705202.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:03.183Z,1516705203.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:03.211Z,1516705203.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:03.572Z,1516705203.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:03.587Z,1516705203.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:03.984Z,1516705203.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:04.017Z,1516705204.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:04.384Z,1516705204.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:04.419Z,1516705204.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:04.777Z,1516705204.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:04.793Z,1516705204.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:05.182Z,1516705205.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:05.198Z,1516705205.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:05.598Z,1516705205.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:05.622Z,1516705205.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:05.999Z,1516705205.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:06.029Z,1516705206.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:06.396Z,1516705206.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:06.420Z,1516705206.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:06.787Z,1516705206.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:06.801Z,1516705206.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:07.176Z,1516705207.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:07.197Z,1516705207.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:07.582Z,1516705207.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:07.601Z,1516705207.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:07.980Z,1516705207.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:08.000Z,1516705208.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:08.385Z,1516705208.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:08.405Z,1516705208.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:08.787Z,1516705208.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:08.802Z,1516705208.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:09.199Z,1516705209.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:09.232Z,1516705209.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:09.573Z,1516705209.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:09.601Z,1516705209.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:09.981Z,1516705209.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:10.004Z,1516705210.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:10.388Z,1516705210.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:10.409Z,1516705210.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:10.787Z,1516705210.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:10.802Z,1516705210.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:11.189Z,1516705211.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:11.204Z,1516705211.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:11.594Z,1516705211.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:11.609Z,1516705211.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:11.991Z,1516705211.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:12.006Z,1516705212.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:12.391Z,1516705212.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:12.406Z,1516705212.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:12.788Z,1516705212.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:12.809Z,1516705212.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:13.183Z,1516705213.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:13.198Z,1516705213.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:13.590Z,1516705213.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:13.606Z,1516705213.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:13.980Z,1516705213.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:14.007Z,1516705214.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:14.392Z,1516705214.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:14.412Z,1516705214.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:14.795Z,1516705214.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:14.815Z,1516705214.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:15.189Z,1516705215.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:15.217Z,1516705215.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:15.572Z,1516705215.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:15.604Z,1516705215.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:15.980Z,1516705215.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:16.017Z,1516705216.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:16.377Z,1516705216.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:16.409Z,1516705216.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:16.775Z,1516705216.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:16.807Z,1516705216.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:17.174Z,1516705217.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:17.189Z,1516705217.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:17.604Z,1516705217.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:17.620Z,1516705217.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:20.680Z,1516705220.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:20.720Z,1516705220.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:20.812Z,1516705220.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:20.833Z,1516705220.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:21.168Z,1516705221.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:21.207Z,1516705221.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:21.569Z,1516705221.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:21.588Z,1516705221.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:21.967Z,1516705221.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:21.997Z,1516705221.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:22.383Z,1516705222.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:22.398Z,1516705222.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:22.779Z,1516705222.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:22.805Z,1516705222.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:23.179Z,1516705223.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:23.205Z,1516705223.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:23.577Z,1516705223.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:23.593Z,1516705223.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:23.975Z,1516705223.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:23.990Z,1516705223.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:24.382Z,1516705224.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:24.422Z,1516705224.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:24.784Z,1516705224.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:24.801Z,1516705224.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:25.182Z,1516705225.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:25.209Z,1516705225.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:25.562Z,1516705225.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:25.600Z,1516705225.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:25.977Z,1516705225.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:26.013Z,1516705226.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:26.387Z,1516705226.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:26.404Z,1516705226.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:26.788Z,1516705226.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:26.809Z,1516705226.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:27.191Z,1516705227.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:27.206Z,1516705227.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:27.562Z,1516705227.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:27.606Z,1516705227.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:27.963Z,1516705227.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:27.994Z,1516705227.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:28.375Z,1516705228.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:28.406Z,1516705228.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:28.792Z,1516705228.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:28.806Z,1516705228.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:29.176Z,1516705229.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:29.218Z,1516705229.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:29.565Z,1516705229.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:29.596Z,1516705229.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:29.960Z,1516705229.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:29.998Z,1516705229.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:30.377Z,1516705230.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:30.406Z,1516705230.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:30.775Z,1516705230.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:30.817Z,1516705230.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:31.171Z,1516705231.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:31.204Z,1516705231.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:31.561Z,1516705231.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:31.576Z,1516705231.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:31.959Z,1516705231.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:31.000Z,1516705232.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:32.383Z,1516705232.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:32.415Z,1516705232.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:32.783Z,1516705232.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:32.817Z,1516705232.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:33.184Z,1516705233.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:33.212Z,1516705233.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:33.573Z,1516705233.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:33.604Z,1516705233.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:33.965Z,1516705233.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:34.004Z,1516705234.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:34.383Z,1516705234.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:34.412Z,1516705234.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:34.779Z,1516705234.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:34.809Z,1516705234.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:35.171Z,1516705235.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:35.206Z,1516705235.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:35.569Z,1516705235.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:35.584Z,1516705235.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:35.968Z,1516705235.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:35.982Z,1516705235.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:36.379Z,1516705236.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:36.415Z,1516705236.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:36.785Z,1516705236.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:36.812Z,1516705236.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:37.175Z,1516705237.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:37.215Z,1516705237.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:37.566Z,1516705237.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:37.581Z,1516705237.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:37.965Z,1516705237.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:37.993Z,1516705237.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:38.371Z,1516705238.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:38.389Z,1516705238.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:38.783Z,1516705238.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:38.798Z,1516705238.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:39.187Z,1516705239.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:39.202Z,1516705239.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:39.570Z,1516705239.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:39.585Z,1516705239.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:39.968Z,1516705239.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:39.983Z,1516705239.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:40.378Z,1516705240.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:40.393Z,1516705240.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:40.778Z,1516705240.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:40.800Z,1516705240.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:41.178Z,1516705241.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:41.193Z,1516705241.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:41.568Z,1516705241.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:41.587Z,1516705241.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:41.969Z,1516705241.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:41.988Z,1516705241.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:42.378Z,1516705242.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:42.397Z,1516705242.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:42.782Z,1516705242.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:42.802Z,1516705242.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:43.183Z,1516705243.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:43.205Z,1516705243.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:43.573Z,1516705243.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:43.589Z,1516705243.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:43.963Z,1516705243.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:43.994Z,1516705243.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:44.379Z,1516705244.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:44.400Z,1516705244.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:44.782Z,1516705244.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:44.804Z,1516705244.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:45.182Z,1516705245.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:45.205Z,1516705245.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:45.562Z,1516705245.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:45.601Z,1516705245.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:45.960Z,1516705245.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:45.997Z,1516705245.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:46.379Z,1516705246.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:46.402Z,1516705246.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:46.782Z,1516705246.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:46.806Z,1516705246.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:47.175Z,1516705247.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:47.197Z,1516705247.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:47.561Z,1516705247.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:47.588Z,1516705247.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:47.961Z,1516705247.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:47.000Z,1516705248.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:48.371Z,1516705248.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:48.398Z,1516705248.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:48.783Z,1516705248.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:48.802Z,1516705248.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:49.171Z,1516705249.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:49.209Z,1516705249.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:49.559Z,1516705249.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:49.574Z,1516705249.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:49.959Z,1516705249.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:49.997Z,1516705249.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:50.375Z,1516705250.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:50.403Z,1516705250.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:50.775Z,1516705250.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:50.801Z,1516705250.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:51.171Z,1516705251.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:51.198Z,1516705251.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:51.569Z,1516705251.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:51.585Z,1516705251.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:51.972Z,1516705251.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:52.009Z,1516705252.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:52.383Z,1516705252.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:52.419Z,1516705252.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:52.783Z,1516705252.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:52.798Z,1516705252.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:53.174Z,1516705253.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:53.193Z,1516705253.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:53.574Z,1516705253.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:53.589Z,1516705253.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:53.965Z,1516705253.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:54.001Z,1516705254.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:54.383Z,1516705254.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:54.398Z,1516705254.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:54.789Z,1516705254.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:54.809Z,1516705254.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:55.196Z,1516705255.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:55.211Z,1516705255.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:55.571Z,1516705255.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:55.610Z,1516705255.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:55.974Z,1516705255.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:55.994Z,1516705255.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:56.381Z,1516705256.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:56.401Z,1516705256.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:56.786Z,1516705256.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:56.806Z,1516705256.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:57.187Z,1516705257.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:57.211Z,1516705257.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:57.567Z,1516705257.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:57.619Z,1516705257.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:57.961Z,1516705257.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:57.997Z,1516705257.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:58.371Z,1516705258.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:58.408Z,1516705258.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:58.780Z,1516705258.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:58.811Z,1516705258.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:59.172Z,1516705259.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:59.198Z,1516705259.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:59.560Z,1516705259.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:59.578Z,1516705259.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:00:59.961Z,1516705259.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:00:59.977Z,1516705259.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:00.366Z,1516705260.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:00.382Z,1516705260.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:00.784Z,1516705260.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:00.809Z,1516705260.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:01.186Z,1516705261.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:01.224Z,1516705261.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:01.577Z,1516705261.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:01.621Z,1516705261.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:01.975Z,1516705261.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:02.004Z,1516705262.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:02.363Z,1516705262.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:02.410Z,1516705262.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:02.764Z,1516705262.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:02.799Z,1516705262.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:03.167Z,1516705263.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:03.196Z,1516705263.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:03.577Z,1516705263.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:03.649Z,1516705263.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:03.991Z,1516705263.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:04.010Z,1516705264.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:04.378Z,1516705264.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:04.417Z,1516705264.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:04.780Z,1516705264.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:04.829Z,1516705264.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:05.173Z,1516705265.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:05.233Z,1516705265.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:05.576Z,1516705265.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:05.597Z,1516705265.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:05.968Z,1516705265.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:06.024Z,1516705266.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:06.366Z,1516705266.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:06.413Z,1516705266.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:06.778Z,1516705266.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:06.806Z,1516705266.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:07.181Z,1516705267.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:07.224Z,1516705267.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:07.596Z,1516705267.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:07.627Z,1516705267.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:07.983Z,1516705267.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:08.018Z,1516705268.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:08.370Z,1516705268.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:08.425Z,1516705268.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:08.770Z,1516705268.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:08.794Z,1516705268.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:09.174Z,1516705269.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:09.193Z,1516705269.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:09.582Z,1516705269.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:09.606Z,1516705269.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:09.985Z,1516705269.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:10.005Z,1516705270.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:10.386Z,1516705270.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:10.409Z,1516705270.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:10.762Z,1516705270.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:10.824Z,1516705270.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:11.166Z,1516705271.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:11.197Z,1516705271.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:11.566Z,1516705271.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:11.625Z,1516705271.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:11.963Z,1516705271.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:12.003Z,1516705272.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:12.360Z,1516705272.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:12.393Z,1516705272.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:12.775Z,1516705272.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:12.810Z,1516705272.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:13.184Z,1516705273.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:13.199Z,1516705273.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:13.579Z,1516705273.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:13.594Z,1516705273.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:13.960Z,1516705273.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:13.993Z,1516705273.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:14.359Z,1516705274.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:14.398Z,1516705274.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:14.761Z,1516705274.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:14.793Z,1516705274.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:15.160Z,1516705275.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:15.196Z,1516705275.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:15.571Z,1516705275.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:15.606Z,1516705275.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:15.987Z,1516705275.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:16.002Z,1516705276.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:16.371Z,1516705276.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:16.407Z,1516705276.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:16.410Z,1516705276.410 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:01:16.410Z,1516705276.410 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:01:16.410Z,1516705276.410 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:01:16.410Z,1516705276.410 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:01:16.760Z,1516705276.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:16.798Z,1516705276.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:16.801Z,1516705276.801 [Default:CheckIn:D] Stopped 2018-01-23T11:01:16.801Z,1516705276.801 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:01:17.164Z,1516705277.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:17.197Z,1516705277.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:17.200Z,1516705277.200 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 463.412337 min 2018-01-23T11:01:17.200Z,1516705277.200 [Default:CheckIn:E] Stopped 2018-01-23T11:01:17.200Z,1516705277.200 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:01:17.200Z,1516705277.200 [Default:CheckIn] Stopped 2018-01-23T11:01:17.201Z,1516705277.201 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:01:17.201Z,1516705277.201 [Default:CheckIn](INFO): Running loop #46 2018-01-23T11:01:17.201Z,1516705277.201 [Default:CheckIn] Running Loop=46 2018-01-23T11:01:17.201Z,1516705277.201 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:01:17.201Z,1516705277.201 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:01:17.561Z,1516705277.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:17.596Z,1516705277.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:17.962Z,1516705277.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:17.998Z,1516705277.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:21.057Z,1516705281.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:21.093Z,1516705281.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:21.197Z,1516705281.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:21.241Z,1516705281.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:21.575Z,1516705281.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:21.608Z,1516705281.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:21.972Z,1516705281.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:21.996Z,1516705281.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:22.357Z,1516705282.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:22.372Z,1516705282.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:22.761Z,1516705282.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:22.776Z,1516705282.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:23.161Z,1516705283.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:23.177Z,1516705283.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:23.559Z,1516705283.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:23.574Z,1516705283.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:23.963Z,1516705283.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:23.978Z,1516705283.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:24.371Z,1516705284.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:24.386Z,1516705284.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:24.761Z,1516705284.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:24.776Z,1516705284.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:25.157Z,1516705285.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:25.172Z,1516705285.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:25.557Z,1516705285.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:25.577Z,1516705285.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:25.962Z,1516705285.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:25.977Z,1516705285.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:26.357Z,1516705286.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:26.371Z,1516705286.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:26.765Z,1516705286.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:26.785Z,1516705286.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:27.171Z,1516705287.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:27.190Z,1516705287.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:27.559Z,1516705287.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:27.593Z,1516705287.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:27.956Z,1516705287.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:27.992Z,1516705287.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:28.352Z,1516705288.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:28.389Z,1516705288.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:28.757Z,1516705288.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:28.771Z,1516705288.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:29.155Z,1516705289.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:29.203Z,1516705289.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:29.571Z,1516705289.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:29.595Z,1516705289.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:29.975Z,1516705289.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:29.999Z,1516705289.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:30.379Z,1516705290.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:30.394Z,1516705290.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:30.757Z,1516705290.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:30.771Z,1516705290.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:31.156Z,1516705291.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:31.181Z,1516705291.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:31.561Z,1516705291.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:31.576Z,1516705291.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:31.956Z,1516705291.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:31.985Z,1516705291.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:32.357Z,1516705292.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:32.380Z,1516705292.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:32.762Z,1516705292.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:32.777Z,1516705292.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:33.163Z,1516705293.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:33.178Z,1516705293.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:33.564Z,1516705293.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:33.579Z,1516705293.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:33.956Z,1516705293.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:33.974Z,1516705293.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:34.356Z,1516705294.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:34.371Z,1516705294.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:34.758Z,1516705294.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:34.785Z,1516705294.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:35.152Z,1516705295.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:35.173Z,1516705295.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:35.564Z,1516705295.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:35.579Z,1516705295.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:35.964Z,1516705295.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:35.984Z,1516705295.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:36.363Z,1516705296.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:36.378Z,1516705296.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:36.757Z,1516705296.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:36.772Z,1516705296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:37.158Z,1516705297.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:37.173Z,1516705297.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:37.552Z,1516705297.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:37.574Z,1516705297.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:37.953Z,1516705297.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:37.980Z,1516705297.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:38.362Z,1516705298.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:38.377Z,1516705298.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:38.766Z,1516705298.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:38.782Z,1516705298.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:39.171Z,1516705299.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:39.187Z,1516705299.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:39.567Z,1516705299.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:39.568Z,1516705299.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:39.582Z,1516705299.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:39.965Z,1516705299.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:39.967Z,1516705299.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:39.981Z,1516705299.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:40.352Z,1516705300.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:40.353Z,1516705300.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:40.389Z,1516705300.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:40.763Z,1516705300.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:40.778Z,1516705300.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:41.147Z,1516705301.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:41.178Z,1516705301.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:41.566Z,1516705301.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:41.590Z,1516705301.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:41.973Z,1516705301.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:41.975Z,1516705301.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:41.988Z,1516705301.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:42.368Z,1516705302.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:42.369Z,1516705302.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:42.391Z,1516705302.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:42.749Z,1516705302.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:42.750Z,1516705302.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:42.791Z,1516705302.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:43.149Z,1516705303.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.150Z,1516705303.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.192Z,1516705303.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:43.549Z,1516705303.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.550Z,1516705303.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.585Z,1516705303.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:43.954Z,1516705303.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.955Z,1516705303.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:43.985Z,1516705303.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:44.348Z,1516705304.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:44.349Z,1516705304.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:44.387Z,1516705304.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:44.773Z,1516705304.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:44.774Z,1516705304.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:44.789Z,1516705304.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:45.168Z,1516705305.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.168Z,1516705305.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.201Z,1516705305.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:45.559Z,1516705305.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.560Z,1516705305.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.595Z,1516705305.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:45.948Z,1516705305.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.950Z,1516705305.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:45.969Z,1516705305.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:46.360Z,1516705306.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:46.361Z,1516705306.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:46.401Z,1516705306.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:46.753Z,1516705306.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:46.754Z,1516705306.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:46.768Z,1516705306.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:47.149Z,1516705307.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.150Z,1516705307.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.169Z,1516705307.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:47.564Z,1516705307.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.565Z,1516705307.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.579Z,1516705307.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:47.963Z,1516705307.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.964Z,1516705307.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:47.978Z,1516705307.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:48.360Z,1516705308.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:48.361Z,1516705308.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:48.375Z,1516705308.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:48.756Z,1516705308.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:48.757Z,1516705308.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:48.771Z,1516705308.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:49.156Z,1516705309.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.157Z,1516705309.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.176Z,1516705309.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:49.556Z,1516705309.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.557Z,1516705309.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.571Z,1516705309.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:49.958Z,1516705309.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.960Z,1516705309.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:49.974Z,1516705309.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:50.357Z,1516705310.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:50.358Z,1516705310.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:50.376Z,1516705310.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:50.764Z,1516705310.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:50.765Z,1516705310.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:50.779Z,1516705310.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:51.164Z,1516705311.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.165Z,1516705311.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.179Z,1516705311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:51.563Z,1516705311.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.564Z,1516705311.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.578Z,1516705311.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:51.961Z,1516705311.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.962Z,1516705311.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:51.976Z,1516705311.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:52.362Z,1516705312.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:52.363Z,1516705312.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:52.385Z,1516705312.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:52.761Z,1516705312.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:52.762Z,1516705312.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:52.776Z,1516705312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:53.153Z,1516705313.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.154Z,1516705313.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.177Z,1516705313.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:53.566Z,1516705313.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.567Z,1516705313.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.581Z,1516705313.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:53.966Z,1516705313.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.967Z,1516705313.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:53.981Z,1516705313.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:54.366Z,1516705314.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:54.368Z,1516705314.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:54.382Z,1516705314.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:54.752Z,1516705314.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:54.753Z,1516705314.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:54.789Z,1516705314.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:55.157Z,1516705315.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.158Z,1516705315.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.172Z,1516705315.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:55.552Z,1516705315.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.553Z,1516705315.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.581Z,1516705315.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:55.957Z,1516705315.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.959Z,1516705315.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:55.973Z,1516705315.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:56.354Z,1516705316.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:56.355Z,1516705316.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:56.386Z,1516705316.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:56.766Z,1516705316.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:56.767Z,1516705316.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:56.781Z,1516705316.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:57.166Z,1516705317.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.167Z,1516705317.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.189Z,1516705317.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:57.567Z,1516705317.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.568Z,1516705317.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.581Z,1516705317.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:57.956Z,1516705317.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.957Z,1516705317.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:57.972Z,1516705317.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:58.352Z,1516705318.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:58.352Z,1516705318.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:58.383Z,1516705318.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:58.758Z,1516705318.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:58.759Z,1516705318.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:58.773Z,1516705318.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:59.152Z,1516705319.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.153Z,1516705319.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.183Z,1516705319.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:59.567Z,1516705319.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.568Z,1516705319.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.582Z,1516705319.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:01:59.971Z,1516705319.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.972Z,1516705319.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:01:59.986Z,1516705319.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:00.367Z,1516705320.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:00.368Z,1516705320.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:00.382Z,1516705320.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:00.752Z,1516705320.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:00.753Z,1516705320.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:00.783Z,1516705320.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:01.157Z,1516705321.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.158Z,1516705321.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.172Z,1516705321.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:01.552Z,1516705321.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.553Z,1516705321.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.583Z,1516705321.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:01.957Z,1516705321.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.958Z,1516705321.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:01.973Z,1516705321.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:02.361Z,1516705322.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:02.362Z,1516705322.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:02.376Z,1516705322.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:02.767Z,1516705322.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:02.768Z,1516705322.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:02.782Z,1516705322.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:03.170Z,1516705323.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.171Z,1516705323.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.186Z,1516705323.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:03.568Z,1516705323.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.569Z,1516705323.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.588Z,1516705323.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:03.952Z,1516705323.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.953Z,1516705323.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:03.985Z,1516705323.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:04.360Z,1516705324.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:04.361Z,1516705324.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:04.380Z,1516705324.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:04.749Z,1516705324.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:04.750Z,1516705324.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:04.777Z,1516705324.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:05.146Z,1516705325.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.147Z,1516705325.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.183Z,1516705325.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:05.566Z,1516705325.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.568Z,1516705325.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.582Z,1516705325.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:05.971Z,1516705325.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.972Z,1516705325.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:05.986Z,1516705325.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:06.364Z,1516705326.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:06.365Z,1516705326.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:06.390Z,1516705326.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:06.748Z,1516705326.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:06.749Z,1516705326.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:06.785Z,1516705326.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:07.152Z,1516705327.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.153Z,1516705327.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.180Z,1516705327.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:07.546Z,1516705327.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.547Z,1516705327.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.574Z,1516705327.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:07.949Z,1516705327.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.950Z,1516705327.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:07.985Z,1516705327.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:08.348Z,1516705328.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:08.349Z,1516705328.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:08.383Z,1516705328.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:08.759Z,1516705328.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:08.760Z,1516705328.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:08.788Z,1516705328.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:09.179Z,1516705329.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.180Z,1516705329.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.194Z,1516705329.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:09.559Z,1516705329.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.560Z,1516705329.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.594Z,1516705329.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:09.949Z,1516705329.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.950Z,1516705329.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:09.985Z,1516705329.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:10.352Z,1516705330.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:10.353Z,1516705330.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:10.393Z,1516705330.393 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:10.393Z,1516705330.393 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155 2018-01-23T11:02:10.393Z,1516705330.393 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:02:10.399Z,1516705330.399 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:10.399Z,1516705330.399 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 155 2018-01-23T11:02:10.399Z,1516705330.399 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:02:10.401Z,1516705330.401 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:10.401Z,1516705330.401 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155 2018-01-23T11:02:10.401Z,1516705330.401 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:02:10.429Z,1516705330.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:02:10.430Z,1516705330.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:02:10.430Z,1516705330.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:02:10.754Z,1516705330.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:10.755Z,1516705330.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:10.799Z,1516705330.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:02:10.799Z,1516705330.799 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155 2018-01-23T11:02:10.800Z,1516705330.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:02:10.800Z,1516705330.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 155 2018-01-23T11:02:10.800Z,1516705330.800 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:02:10.800Z,1516705330.800 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155 2018-01-23T11:02:11.152Z,1516705331.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.153Z,1516705331.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.179Z,1516705331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:02:11.179Z,1516705331.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:02:11.180Z,1516705331.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:02:11.180Z,1516705331.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:02:11.180Z,1516705331.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:02:11.181Z,1516705331.181 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:02:11.181Z,1516705331.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:02:11.181Z,1516705331.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:02:11.182Z,1516705331.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:02:11.562Z,1516705331.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.563Z,1516705331.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.577Z,1516705331.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:02:11.578Z,1516705331.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:11.963Z,1516705331.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.964Z,1516705331.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:11.977Z,1516705331.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:02:11.978Z,1516705331.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:12.364Z,1516705332.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:12.365Z,1516705332.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:12.378Z,1516705332.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:02:12.380Z,1516705332.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:12.756Z,1516705332.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:12.757Z,1516705332.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:12.776Z,1516705332.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:02:12.777Z,1516705332.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:13.158Z,1516705333.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.159Z,1516705333.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.173Z,1516705333.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:02:13.174Z,1516705333.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:13.556Z,1516705333.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.557Z,1516705333.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.577Z,1516705333.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:02:13.578Z,1516705333.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:13.953Z,1516705333.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.954Z,1516705333.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:13.980Z,1516705333.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:02:13.981Z,1516705333.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:14.356Z,1516705334.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:14.357Z,1516705334.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:14.383Z,1516705334.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:02:14.384Z,1516705334.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:14.767Z,1516705334.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:14.768Z,1516705334.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:14.782Z,1516705334.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:02:14.783Z,1516705334.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:15.166Z,1516705335.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.167Z,1516705335.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.181Z,1516705335.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:02:15.182Z,1516705335.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:15.567Z,1516705335.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.568Z,1516705335.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.584Z,1516705335.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:02:15.585Z,1516705335.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:15.956Z,1516705335.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.957Z,1516705335.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:15.972Z,1516705335.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:02:15.973Z,1516705335.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:16.352Z,1516705336.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:16.353Z,1516705336.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:16.379Z,1516705336.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:02:16.380Z,1516705336.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:16.758Z,1516705336.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:16.759Z,1516705336.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:16.772Z,1516705336.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:02:16.773Z,1516705336.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:17.152Z,1516705337.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.153Z,1516705337.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.184Z,1516705337.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:02:17.185Z,1516705337.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:17.567Z,1516705337.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.568Z,1516705337.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.582Z,1516705337.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:02:17.584Z,1516705337.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:17.971Z,1516705337.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.972Z,1516705337.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:17.985Z,1516705337.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:02:17.986Z,1516705337.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:18.365Z,1516705338.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:18.366Z,1516705338.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:18.388Z,1516705338.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:02:18.389Z,1516705338.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:21.480Z,1516705341.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:21.481Z,1516705341.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:21.495Z,1516705341.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T11:02:21.496Z,1516705341.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:21.593Z,1516705341.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:21.594Z,1516705341.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:21.633Z,1516705341.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:02:21.634Z,1516705341.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:21.000Z,1516705342.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.000Z,1516705342.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.025Z,1516705342.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:02:22.026Z,1516705342.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:22.415Z,1516705342.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.416Z,1516705342.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.429Z,1516705342.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:02:22.430Z,1516705342.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:22.799Z,1516705342.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.801Z,1516705342.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:22.825Z,1516705342.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:02:22.826Z,1516705342.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:23.189Z,1516705343.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:23.190Z,1516705343.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:23.228Z,1516705343.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:02:23.229Z,1516705343.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:23.586Z,1516705343.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:23.587Z,1516705343.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:23.601Z,1516705343.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:02:23.602Z,1516705343.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:23.991Z,1516705343.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:23.992Z,1516705343.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:24.012Z,1516705344.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:02:24.013Z,1516705344.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:24.391Z,1516705344.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:24.392Z,1516705344.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:24.406Z,1516705344.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:02:24.407Z,1516705344.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:24.795Z,1516705344.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:24.796Z,1516705344.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:24.810Z,1516705344.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:02:24.811Z,1516705344.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:25.195Z,1516705345.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:25.196Z,1516705345.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:25.210Z,1516705345.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:02:25.211Z,1516705345.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:25.596Z,1516705345.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:25.597Z,1516705345.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:25.610Z,1516705345.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:02:25.611Z,1516705345.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:25.985Z,1516705345.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:25.986Z,1516705345.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:26.014Z,1516705346.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:02:26.015Z,1516705346.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:26.382Z,1516705346.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:26.384Z,1516705346.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:26.410Z,1516705346.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:02:26.415Z,1516705346.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:26.784Z,1516705346.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:26.784Z,1516705346.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:26.806Z,1516705346.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:02:26.808Z,1516705346.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:27.184Z,1516705347.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:27.185Z,1516705347.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:27.212Z,1516705347.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:02:27.213Z,1516705347.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:27.595Z,1516705347.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:27.596Z,1516705347.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:27.611Z,1516705347.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:02:27.612Z,1516705347.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:27.997Z,1516705347.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:27.997Z,1516705347.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:28.024Z,1516705348.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:02:28.025Z,1516705348.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:28.397Z,1516705348.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:28.398Z,1516705348.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:28.411Z,1516705348.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:02:28.412Z,1516705348.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:28.776Z,1516705348.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:28.778Z,1516705348.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:28.805Z,1516705348.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:02:28.806Z,1516705348.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:29.176Z,1516705349.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:29.177Z,1516705349.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:29.209Z,1516705349.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:02:29.210Z,1516705349.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:29.576Z,1516705349.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:29.577Z,1516705349.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:29.611Z,1516705349.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:02:29.612Z,1516705349.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:29.981Z,1516705349.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:29.982Z,1516705349.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:30.009Z,1516705350.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:02:30.010Z,1516705350.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:30.376Z,1516705350.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:30.377Z,1516705350.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:30.413Z,1516705350.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:30.799Z,1516705350.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:30.800Z,1516705350.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:30.814Z,1516705350.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:31.203Z,1516705351.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:31.204Z,1516705351.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:31.218Z,1516705351.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:31.591Z,1516705351.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:31.592Z,1516705351.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:31.617Z,1516705351.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:31.976Z,1516705351.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:31.977Z,1516705351.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:32.015Z,1516705352.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:32.380Z,1516705352.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:32.382Z,1516705352.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:32.413Z,1516705352.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:32.781Z,1516705352.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:32.782Z,1516705352.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:32.820Z,1516705352.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:33.176Z,1516705353.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:33.221Z,1516705353.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:33.592Z,1516705353.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:33.618Z,1516705353.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:33.991Z,1516705353.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:34.025Z,1516705354.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:34.386Z,1516705354.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:34.418Z,1516705354.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:34.776Z,1516705354.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:34.813Z,1516705354.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:35.176Z,1516705355.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:35.197Z,1516705355.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:35.584Z,1516705355.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:35.599Z,1516705355.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:35.985Z,1516705355.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:36.001Z,1516705356.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:36.382Z,1516705356.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:36.410Z,1516705356.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:36.799Z,1516705356.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:36.831Z,1516705356.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:37.196Z,1516705357.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:37.210Z,1516705357.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:37.592Z,1516705357.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:37.606Z,1516705357.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:37.985Z,1516705357.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:37.000Z,1516705358.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:38.386Z,1516705358.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:38.401Z,1516705358.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:38.784Z,1516705358.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:38.799Z,1516705358.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:39.184Z,1516705359.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:39.198Z,1516705359.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:39.588Z,1516705359.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:39.603Z,1516705359.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:39.996Z,1516705359.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:40.010Z,1516705360.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:40.391Z,1516705360.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:40.405Z,1516705360.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:40.784Z,1516705360.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:40.803Z,1516705360.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:41.185Z,1516705361.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:41.205Z,1516705361.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:41.590Z,1516705361.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:41.605Z,1516705361.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:41.991Z,1516705361.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:42.006Z,1516705362.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:42.394Z,1516705362.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:42.417Z,1516705362.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:42.777Z,1516705362.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:42.803Z,1516705362.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:43.176Z,1516705363.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:43.213Z,1516705363.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:43.599Z,1516705363.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:43.614Z,1516705363.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:43.998Z,1516705363.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:44.024Z,1516705364.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:44.395Z,1516705364.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:44.410Z,1516705364.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:44.777Z,1516705364.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:44.813Z,1516705364.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:45.176Z,1516705365.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:45.211Z,1516705365.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:45.599Z,1516705365.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:45.614Z,1516705365.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:45.999Z,1516705365.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:46.021Z,1516705366.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:46.400Z,1516705366.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:46.424Z,1516705366.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:46.785Z,1516705366.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:46.801Z,1516705366.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:47.183Z,1516705367.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:47.198Z,1516705367.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:47.591Z,1516705367.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:47.606Z,1516705367.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:47.000Z,1516705368.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:48.030Z,1516705368.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:48.387Z,1516705368.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:48.402Z,1516705368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:48.785Z,1516705368.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:48.800Z,1516705368.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:49.184Z,1516705369.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:49.199Z,1516705369.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:49.588Z,1516705369.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:49.603Z,1516705369.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:49.991Z,1516705369.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:50.006Z,1516705370.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:50.400Z,1516705370.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:50.430Z,1516705370.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:50.780Z,1516705370.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:50.803Z,1516705370.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:51.185Z,1516705371.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:51.186Z,1516705371.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:51.200Z,1516705371.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:51.590Z,1516705371.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:51.591Z,1516705371.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:51.605Z,1516705371.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:51.994Z,1516705371.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:51.995Z,1516705371.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:52.009Z,1516705372.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:52.396Z,1516705372.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:52.397Z,1516705372.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:52.416Z,1516705372.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:52.790Z,1516705372.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:52.791Z,1516705372.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:52.805Z,1516705372.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:53.180Z,1516705373.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:53.181Z,1516705373.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:53.207Z,1516705373.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:53.599Z,1516705373.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:53.600Z,1516705373.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:53.614Z,1516705373.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:53.998Z,1516705373.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:53.999Z,1516705373.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:54.013Z,1516705374.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:54.396Z,1516705374.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:54.397Z,1516705374.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:54.411Z,1516705374.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:54.791Z,1516705374.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:54.792Z,1516705374.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:54.806Z,1516705374.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:55.183Z,1516705375.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:55.184Z,1516705375.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:55.204Z,1516705375.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:55.599Z,1516705375.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:55.600Z,1516705375.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:55.614Z,1516705375.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:55.000Z,1516705376.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.001Z,1516705376.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.014Z,1516705376.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:56.395Z,1516705376.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.396Z,1516705376.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.410Z,1516705376.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:56.783Z,1516705376.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.784Z,1516705376.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:56.806Z,1516705376.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:57.187Z,1516705377.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:57.213Z,1516705377.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:57.596Z,1516705377.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:57.611Z,1516705377.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:57.000Z,1516705378.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:58.021Z,1516705378.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:58.394Z,1516705378.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:58.434Z,1516705378.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:58.781Z,1516705378.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:58.809Z,1516705378.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:59.176Z,1516705379.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:59.203Z,1516705379.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:02:59.594Z,1516705379.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:02:59.641Z,1516705379.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:00.005Z,1516705380.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:00.020Z,1516705380.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:00.396Z,1516705380.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:00.412Z,1516705380.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:00.777Z,1516705380.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:00.810Z,1516705380.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:01.175Z,1516705381.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:01.198Z,1516705381.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:01.587Z,1516705381.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:01.625Z,1516705381.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:01.995Z,1516705381.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:02.024Z,1516705382.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:02.388Z,1516705382.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:02.419Z,1516705382.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:02.790Z,1516705382.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:02.821Z,1516705382.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:03.181Z,1516705383.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:03.196Z,1516705383.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:03.588Z,1516705383.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:03.603Z,1516705383.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:04.000Z,1516705384.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:04.030Z,1516705384.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:04.391Z,1516705384.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:04.432Z,1516705384.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:04.787Z,1516705384.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:04.803Z,1516705384.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:05.183Z,1516705385.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:05.211Z,1516705385.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:05.592Z,1516705385.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:05.608Z,1516705385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:05.992Z,1516705385.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:06.007Z,1516705386.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:06.390Z,1516705386.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:06.406Z,1516705386.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:06.786Z,1516705386.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:06.801Z,1516705386.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:07.180Z,1516705387.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:07.200Z,1516705387.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:07.590Z,1516705387.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:07.606Z,1516705387.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:08.003Z,1516705388.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:08.018Z,1516705388.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:08.388Z,1516705388.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:08.408Z,1516705388.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:08.784Z,1516705388.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:08.803Z,1516705388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:09.185Z,1516705389.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:09.200Z,1516705389.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:09.589Z,1516705389.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:09.605Z,1516705389.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:09.991Z,1516705389.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:10.006Z,1516705390.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:10.390Z,1516705390.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:10.413Z,1516705390.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:10.788Z,1516705390.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:10.803Z,1516705390.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:11.184Z,1516705391.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:11.199Z,1516705391.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:11.590Z,1516705391.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:11.612Z,1516705391.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:11.994Z,1516705391.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:12.013Z,1516705392.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:12.394Z,1516705392.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:12.413Z,1516705392.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:12.786Z,1516705392.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:12.800Z,1516705392.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:13.180Z,1516705393.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:13.200Z,1516705393.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:13.590Z,1516705393.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:13.617Z,1516705393.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:13.998Z,1516705393.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:14.013Z,1516705394.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:14.395Z,1516705394.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:14.417Z,1516705394.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:14.784Z,1516705394.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:14.803Z,1516705394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:15.186Z,1516705395.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:15.205Z,1516705395.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:15.594Z,1516705395.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:15.610Z,1516705395.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:15.998Z,1516705395.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:16.021Z,1516705396.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:16.400Z,1516705396.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:16.415Z,1516705396.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:16.780Z,1516705396.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:16.803Z,1516705396.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:17.179Z,1516705397.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:17.212Z,1516705397.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:17.585Z,1516705397.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:17.600Z,1516705397.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:17.992Z,1516705397.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:18.015Z,1516705398.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:18.400Z,1516705398.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:18.414Z,1516705398.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:21.976Z,1516705401.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:22.011Z,1516705402.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:22.117Z,1516705402.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:22.152Z,1516705402.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:22.468Z,1516705402.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:22.497Z,1516705402.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:22.869Z,1516705402.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:22.912Z,1516705402.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:23.265Z,1516705403.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:23.280Z,1516705403.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:23.687Z,1516705403.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:23.710Z,1516705403.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:24.087Z,1516705404.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:24.114Z,1516705404.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:24.479Z,1516705404.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:24.494Z,1516705404.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:24.873Z,1516705404.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:24.888Z,1516705404.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:25.272Z,1516705405.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:25.286Z,1516705405.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:25.687Z,1516705405.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:25.720Z,1516705405.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:26.074Z,1516705406.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:26.089Z,1516705406.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:26.472Z,1516705406.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:26.486Z,1516705406.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:26.876Z,1516705406.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:26.891Z,1516705406.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:27.279Z,1516705407.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:27.294Z,1516705407.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:27.690Z,1516705407.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:27.725Z,1516705407.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:28.070Z,1516705408.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:28.093Z,1516705408.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:28.470Z,1516705408.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:28.493Z,1516705408.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:28.873Z,1516705408.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:28.887Z,1516705408.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:29.270Z,1516705409.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:29.293Z,1516705409.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:29.687Z,1516705409.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:29.702Z,1516705409.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:30.083Z,1516705410.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:30.098Z,1516705410.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:30.478Z,1516705410.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:30.497Z,1516705410.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:30.872Z,1516705410.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:30.887Z,1516705410.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:31.277Z,1516705411.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:31.292Z,1516705411.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:31.678Z,1516705411.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:31.697Z,1516705411.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:32.072Z,1516705412.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:32.091Z,1516705412.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:32.473Z,1516705412.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:32.488Z,1516705412.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:32.878Z,1516705412.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:32.897Z,1516705412.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:33.279Z,1516705413.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:33.294Z,1516705413.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:33.678Z,1516705413.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:33.693Z,1516705413.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:34.072Z,1516705414.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:34.087Z,1516705414.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:34.472Z,1516705414.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:34.487Z,1516705414.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:34.874Z,1516705414.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:34.888Z,1516705414.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:35.272Z,1516705415.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:35.287Z,1516705415.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:35.691Z,1516705415.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:35.723Z,1516705415.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:36.082Z,1516705416.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:36.097Z,1516705416.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:36.482Z,1516705416.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:36.497Z,1516705416.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:36.872Z,1516705416.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:36.887Z,1516705416.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:37.273Z,1516705417.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:37.287Z,1516705417.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:37.676Z,1516705417.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:37.691Z,1516705417.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:38.068Z,1516705418.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:38.086Z,1516705418.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:38.472Z,1516705418.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:38.487Z,1516705418.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:38.882Z,1516705418.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:38.898Z,1516705418.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:39.286Z,1516705419.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:39.305Z,1516705419.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:39.687Z,1516705419.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:39.709Z,1516705419.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:40.076Z,1516705420.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:40.097Z,1516705420.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:40.480Z,1516705420.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:40.501Z,1516705420.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:40.878Z,1516705420.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:40.893Z,1516705420.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:41.274Z,1516705421.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:41.305Z,1516705421.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:41.691Z,1516705421.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:41.706Z,1516705421.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:42.088Z,1516705422.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:42.109Z,1516705422.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:42.487Z,1516705422.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:42.502Z,1516705422.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:42.865Z,1516705422.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:42.897Z,1516705422.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:43.264Z,1516705423.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:43.304Z,1516705423.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:43.688Z,1516705423.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:43.703Z,1516705423.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:44.094Z,1516705424.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:44.109Z,1516705424.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:44.485Z,1516705424.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:44.500Z,1516705424.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:44.866Z,1516705424.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:44.897Z,1516705424.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:45.265Z,1516705425.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:45.297Z,1516705425.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:45.679Z,1516705425.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:45.705Z,1516705425.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:46.089Z,1516705426.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:46.104Z,1516705426.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:46.479Z,1516705426.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:46.502Z,1516705426.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:46.865Z,1516705426.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:46.905Z,1516705426.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:47.262Z,1516705427.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:47.277Z,1516705427.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:47.697Z,1516705427.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:47.712Z,1516705427.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:48.079Z,1516705428.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:48.116Z,1516705428.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:48.475Z,1516705428.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:48.502Z,1516705428.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:48.872Z,1516705428.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:48.913Z,1516705428.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:49.277Z,1516705429.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:49.291Z,1516705429.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:49.680Z,1516705429.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:49.695Z,1516705429.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:50.091Z,1516705430.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:50.124Z,1516705430.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:50.479Z,1516705430.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:50.494Z,1516705430.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:50.873Z,1516705430.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:50.896Z,1516705430.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:51.278Z,1516705431.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:51.294Z,1516705431.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:51.683Z,1516705431.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:51.699Z,1516705431.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:52.082Z,1516705432.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:52.105Z,1516705432.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:52.482Z,1516705432.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:52.498Z,1516705432.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:52.874Z,1516705432.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:52.889Z,1516705432.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:53.268Z,1516705433.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:53.289Z,1516705433.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:53.682Z,1516705433.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:53.697Z,1516705433.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:54.082Z,1516705434.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:54.098Z,1516705434.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:54.483Z,1516705434.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:54.498Z,1516705434.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:54.869Z,1516705434.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:54.891Z,1516705434.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:55.273Z,1516705435.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:55.287Z,1516705435.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:55.682Z,1516705435.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:55.701Z,1516705435.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:56.083Z,1516705436.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:56.098Z,1516705436.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:56.482Z,1516705436.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:56.505Z,1516705436.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:56.878Z,1516705436.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:56.901Z,1516705436.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:57.268Z,1516705437.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:57.290Z,1516705437.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:57.687Z,1516705437.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:57.702Z,1516705437.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:58.082Z,1516705438.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:58.097Z,1516705438.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:58.482Z,1516705438.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:58.497Z,1516705438.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:58.874Z,1516705438.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:58.889Z,1516705438.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:59.268Z,1516705439.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:59.290Z,1516705439.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:03:59.686Z,1516705439.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:03:59.702Z,1516705439.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:00.087Z,1516705440.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:00.102Z,1516705440.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:00.482Z,1516705440.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:00.497Z,1516705440.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:00.871Z,1516705440.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:00.891Z,1516705440.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:01.271Z,1516705441.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:01.297Z,1516705441.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:01.683Z,1516705441.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:01.698Z,1516705441.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:02.086Z,1516705442.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:02.101Z,1516705442.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:02.484Z,1516705442.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:02.501Z,1516705442.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:02.872Z,1516705442.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:02.892Z,1516705442.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:03.267Z,1516705443.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:03.311Z,1516705443.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:03.686Z,1516705443.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:03.701Z,1516705443.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:04.082Z,1516705444.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:04.097Z,1516705444.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:04.482Z,1516705444.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:04.497Z,1516705444.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:04.874Z,1516705444.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:04.892Z,1516705444.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:05.262Z,1516705445.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:05.293Z,1516705445.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:05.686Z,1516705445.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:05.701Z,1516705445.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:06.086Z,1516705446.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:06.101Z,1516705446.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:06.482Z,1516705446.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:06.497Z,1516705446.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:06.872Z,1516705446.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:06.891Z,1516705446.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:07.273Z,1516705447.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:07.292Z,1516705447.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:07.686Z,1516705447.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:07.702Z,1516705447.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:08.084Z,1516705448.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:08.103Z,1516705448.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:08.484Z,1516705448.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:08.505Z,1516705448.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:08.877Z,1516705448.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:08.892Z,1516705448.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:09.268Z,1516705449.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:09.290Z,1516705449.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:09.683Z,1516705449.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:09.698Z,1516705449.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:10.086Z,1516705450.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:10.105Z,1516705450.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:10.482Z,1516705450.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:10.497Z,1516705450.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:10.872Z,1516705450.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:10.898Z,1516705450.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:11.263Z,1516705451.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:11.294Z,1516705451.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:11.670Z,1516705451.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:11.702Z,1516705451.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:12.084Z,1516705452.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:12.099Z,1516705452.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:12.482Z,1516705452.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:12.497Z,1516705452.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:12.882Z,1516705452.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:12.897Z,1516705452.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:13.274Z,1516705453.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:13.296Z,1516705453.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:13.668Z,1516705453.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:13.690Z,1516705453.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:14.069Z,1516705454.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:14.091Z,1516705454.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:14.474Z,1516705454.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:14.492Z,1516705454.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:14.883Z,1516705454.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:14.898Z,1516705454.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:15.286Z,1516705455.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:15.301Z,1516705455.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:15.688Z,1516705455.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:15.709Z,1516705455.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:16.062Z,1516705456.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:16.090Z,1516705456.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:16.468Z,1516705456.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:16.494Z,1516705456.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:16.865Z,1516705456.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:16.893Z,1516705456.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:17.263Z,1516705457.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:17.296Z,1516705457.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:17.668Z,1516705457.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:17.701Z,1516705457.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:18.081Z,1516705458.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:18.103Z,1516705458.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:18.486Z,1516705458.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:18.501Z,1516705458.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:21.603Z,1516705461.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:21.639Z,1516705461.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:21.741Z,1516705461.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:21.788Z,1516705461.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:22.089Z,1516705462.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:22.104Z,1516705462.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:22.494Z,1516705462.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:22.521Z,1516705462.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:22.894Z,1516705462.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:22.949Z,1516705462.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:23.284Z,1516705463.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:23.317Z,1516705463.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:23.704Z,1516705463.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:23.719Z,1516705463.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:24.102Z,1516705464.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:24.117Z,1516705464.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:24.498Z,1516705464.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:24.518Z,1516705464.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:24.548Z,1516705464.548 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:04:24.882Z,1516705464.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:24.913Z,1516705464.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:25.282Z,1516705465.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:25.309Z,1516705465.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:25.681Z,1516705465.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:25.717Z,1516705465.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:26.105Z,1516705466.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:26.120Z,1516705466.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:26.498Z,1516705466.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:26.529Z,1516705466.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:26.904Z,1516705466.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:26.924Z,1516705466.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:27.280Z,1516705467.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:27.324Z,1516705467.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:27.681Z,1516705467.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:27.712Z,1516705467.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:28.081Z,1516705468.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:28.097Z,1516705468.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:28.480Z,1516705468.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:28.495Z,1516705468.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:28.899Z,1516705468.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:28.929Z,1516705468.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:29.303Z,1516705469.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:29.337Z,1516705469.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:29.695Z,1516705469.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:29.732Z,1516705469.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:30.091Z,1516705470.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:30.106Z,1516705470.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:30.486Z,1516705470.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:30.501Z,1516705470.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:30.887Z,1516705470.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:30.902Z,1516705470.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:31.287Z,1516705471.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:31.310Z,1516705471.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:31.690Z,1516705471.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:31.705Z,1516705471.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:32.092Z,1516705472.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:32.113Z,1516705472.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:32.496Z,1516705472.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:32.535Z,1516705472.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:32.892Z,1516705472.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:32.908Z,1516705472.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:33.289Z,1516705473.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:33.308Z,1516705473.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:33.686Z,1516705473.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:33.710Z,1516705473.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:34.089Z,1516705474.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:34.105Z,1516705474.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:34.489Z,1516705474.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:34.505Z,1516705474.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:34.898Z,1516705474.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:34.914Z,1516705474.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:35.297Z,1516705475.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:35.313Z,1516705475.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:35.699Z,1516705475.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:35.714Z,1516705475.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:36.088Z,1516705476.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:36.103Z,1516705476.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:36.486Z,1516705476.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:36.513Z,1516705476.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:36.894Z,1516705476.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:36.916Z,1516705476.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:37.293Z,1516705477.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:37.308Z,1516705477.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:37.680Z,1516705477.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:37.717Z,1516705477.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:38.099Z,1516705478.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:38.114Z,1516705478.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:38.503Z,1516705478.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:38.518Z,1516705478.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:38.899Z,1516705478.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:38.914Z,1516705478.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:39.280Z,1516705479.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:39.315Z,1516705479.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:39.681Z,1516705479.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:39.717Z,1516705479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:40.085Z,1516705480.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:40.111Z,1516705480.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:40.480Z,1516705480.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:40.516Z,1516705480.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:40.900Z,1516705480.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:40.915Z,1516705480.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:41.302Z,1516705481.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:41.317Z,1516705481.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:41.694Z,1516705481.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:41.727Z,1516705481.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:42.080Z,1516705482.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:42.106Z,1516705482.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:42.480Z,1516705482.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:42.512Z,1516705482.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:42.879Z,1516705482.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:42.919Z,1516705482.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:43.281Z,1516705483.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:43.313Z,1516705483.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:43.680Z,1516705483.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:43.712Z,1516705483.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:44.098Z,1516705484.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:44.123Z,1516705484.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:44.503Z,1516705484.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:44.518Z,1516705484.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:44.896Z,1516705484.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:44.926Z,1516705484.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:45.280Z,1516705485.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:45.309Z,1516705485.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:45.684Z,1516705485.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:45.710Z,1516705485.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:46.081Z,1516705486.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:46.112Z,1516705486.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:46.480Z,1516705486.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:46.516Z,1516705486.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:46.899Z,1516705486.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:46.914Z,1516705486.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:47.300Z,1516705487.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:47.331Z,1516705487.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:47.690Z,1516705487.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:47.716Z,1516705487.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:48.081Z,1516705488.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:48.112Z,1516705488.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:48.480Z,1516705488.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:48.512Z,1516705488.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:48.880Z,1516705488.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:48.918Z,1516705488.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:49.289Z,1516705489.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:49.316Z,1516705489.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:49.680Z,1516705489.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:49.712Z,1516705489.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:50.090Z,1516705490.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:50.120Z,1516705490.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:50.507Z,1516705490.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:50.522Z,1516705490.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:50.899Z,1516705490.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:50.914Z,1516705490.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:51.280Z,1516705491.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:51.318Z,1516705491.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:51.681Z,1516705491.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:51.712Z,1516705491.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:52.081Z,1516705492.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:52.112Z,1516705492.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:52.480Z,1516705492.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:52.518Z,1516705492.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:52.903Z,1516705492.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:52.918Z,1516705492.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:53.302Z,1516705493.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:53.329Z,1516705493.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:53.704Z,1516705493.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:53.705Z,1516705493.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:53.719Z,1516705493.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:54.084Z,1516705494.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.086Z,1516705494.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.117Z,1516705494.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:54.480Z,1516705494.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.481Z,1516705494.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.517Z,1516705494.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:54.884Z,1516705494.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.885Z,1516705494.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:54.919Z,1516705494.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:55.285Z,1516705495.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:55.286Z,1516705495.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:55.322Z,1516705495.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:55.680Z,1516705495.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:55.681Z,1516705495.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:55.721Z,1516705495.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:56.095Z,1516705496.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.096Z,1516705496.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.124Z,1516705496.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:56.495Z,1516705496.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.496Z,1516705496.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.529Z,1516705496.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:56.891Z,1516705496.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.892Z,1516705496.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:56.929Z,1516705496.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:57.284Z,1516705497.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:57.285Z,1516705497.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:57.299Z,1516705497.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:57.724Z,1516705497.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:57.726Z,1516705497.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:57.751Z,1516705497.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:58.089Z,1516705498.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.090Z,1516705498.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.104Z,1516705498.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:58.485Z,1516705498.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.486Z,1516705498.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.499Z,1516705498.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:58.903Z,1516705498.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.904Z,1516705498.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:58.929Z,1516705498.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:59.307Z,1516705499.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:59.308Z,1516705499.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:59.341Z,1516705499.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:04:59.703Z,1516705499.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:59.704Z,1516705499.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:04:59.729Z,1516705499.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:00.093Z,1516705500.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.094Z,1516705500.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.108Z,1516705500.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:00.485Z,1516705500.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.486Z,1516705500.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.509Z,1516705500.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:00.891Z,1516705500.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.892Z,1516705500.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:00.906Z,1516705500.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:01.288Z,1516705501.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:01.289Z,1516705501.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:01.304Z,1516705501.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:01.688Z,1516705501.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:01.689Z,1516705501.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:01.703Z,1516705501.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:02.092Z,1516705502.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.093Z,1516705502.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.112Z,1516705502.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:02.503Z,1516705502.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.504Z,1516705502.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.536Z,1516705502.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:02.891Z,1516705502.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.892Z,1516705502.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:02.907Z,1516705502.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:03.289Z,1516705503.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:03.290Z,1516705503.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:03.308Z,1516705503.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:03.690Z,1516705503.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:03.691Z,1516705503.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:03.706Z,1516705503.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:04.088Z,1516705504.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.089Z,1516705504.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.107Z,1516705504.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:04.491Z,1516705504.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.492Z,1516705504.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.506Z,1516705504.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:04.896Z,1516705504.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.897Z,1516705504.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:04.911Z,1516705504.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:05.295Z,1516705505.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:05.296Z,1516705505.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:05.311Z,1516705505.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:05.696Z,1516705505.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:05.697Z,1516705505.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:05.710Z,1516705505.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:06.090Z,1516705506.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.091Z,1516705506.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.105Z,1516705506.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:06.490Z,1516705506.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.491Z,1516705506.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.505Z,1516705506.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:06.890Z,1516705506.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.892Z,1516705506.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:06.906Z,1516705506.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:07.290Z,1516705507.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:07.291Z,1516705507.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:07.306Z,1516705507.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:07.689Z,1516705507.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:07.690Z,1516705507.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:07.705Z,1516705507.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:08.096Z,1516705508.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.097Z,1516705508.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.112Z,1516705508.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:08.495Z,1516705508.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.496Z,1516705508.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.511Z,1516705508.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:08.895Z,1516705508.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.896Z,1516705508.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:08.910Z,1516705508.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:09.294Z,1516705509.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:09.295Z,1516705509.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:09.309Z,1516705509.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:09.688Z,1516705509.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:09.689Z,1516705509.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:09.708Z,1516705509.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:10.089Z,1516705510.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.090Z,1516705510.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.111Z,1516705510.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:10.488Z,1516705510.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.489Z,1516705510.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.517Z,1516705510.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:10.899Z,1516705510.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.900Z,1516705510.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:10.915Z,1516705510.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:11.298Z,1516705511.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:11.299Z,1516705511.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:11.321Z,1516705511.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:11.321Z,1516705511.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156 2018-01-23T11:05:11.321Z,1516705511.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:05:11.323Z,1516705511.323 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:11.323Z,1516705511.323 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 156 2018-01-23T11:05:11.323Z,1516705511.323 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:05:11.325Z,1516705511.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:11.325Z,1516705511.325 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156 2018-01-23T11:05:11.325Z,1516705511.325 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:05:11.362Z,1516705511.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:05:11.362Z,1516705511.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:05:11.362Z,1516705511.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:05:11.699Z,1516705511.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:11.700Z,1516705511.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:11.752Z,1516705511.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:05:11.752Z,1516705511.752 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156 2018-01-23T11:05:11.752Z,1516705511.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:05:11.752Z,1516705511.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 156 2018-01-23T11:05:11.753Z,1516705511.753 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:05:11.753Z,1516705511.753 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156 2018-01-23T11:05:12.080Z,1516705512.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.082Z,1516705512.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.116Z,1516705512.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:05:12.117Z,1516705512.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:05:12.117Z,1516705512.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:05:12.117Z,1516705512.117 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:05:12.118Z,1516705512.118 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:05:12.118Z,1516705512.118 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:05:12.123Z,1516705512.123 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:05:12.123Z,1516705512.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:05:12.123Z,1516705512.123 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:05:12.480Z,1516705512.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.481Z,1516705512.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.519Z,1516705512.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:05:12.520Z,1516705512.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:12.880Z,1516705512.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.881Z,1516705512.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:12.919Z,1516705512.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:05:12.920Z,1516705512.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:13.281Z,1516705513.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:13.282Z,1516705513.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:13.308Z,1516705513.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:05:13.309Z,1516705513.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:13.679Z,1516705513.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:13.680Z,1516705513.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:13.717Z,1516705513.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:05:13.718Z,1516705513.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:14.091Z,1516705514.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.092Z,1516705514.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.123Z,1516705514.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:05:14.124Z,1516705514.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:14.495Z,1516705514.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.496Z,1516705514.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.531Z,1516705514.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:05:14.532Z,1516705514.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:14.903Z,1516705514.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.904Z,1516705514.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:14.926Z,1516705514.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:05:14.929Z,1516705514.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:15.285Z,1516705515.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:15.286Z,1516705515.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:15.321Z,1516705515.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:05:15.322Z,1516705515.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:15.686Z,1516705515.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:15.688Z,1516705515.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:15.701Z,1516705515.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:05:15.702Z,1516705515.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:16.090Z,1516705516.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.091Z,1516705516.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.105Z,1516705516.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:05:16.106Z,1516705516.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:16.488Z,1516705516.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.489Z,1516705516.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.508Z,1516705516.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:05:16.509Z,1516705516.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:16.894Z,1516705516.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.895Z,1516705516.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:16.916Z,1516705516.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:05:16.917Z,1516705516.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:17.299Z,1516705517.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:17.300Z,1516705517.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:17.314Z,1516705517.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:05:17.315Z,1516705517.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:17.699Z,1516705517.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:17.700Z,1516705517.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:17.720Z,1516705517.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:05:17.721Z,1516705517.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:18.087Z,1516705518.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:18.088Z,1516705518.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:18.106Z,1516705518.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:05:18.107Z,1516705518.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:18.484Z,1516705518.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:18.484Z,1516705518.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:18.520Z,1516705518.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:05:18.521Z,1516705518.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:21.577Z,1516705521.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:21.601Z,1516705521.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T11:05:21.602Z,1516705521.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:21.716Z,1516705521.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:21.730Z,1516705521.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:05:21.732Z,1516705521.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:22.075Z,1516705522.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:22.090Z,1516705522.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:05:22.111Z,1516705522.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:22.469Z,1516705522.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:22.471Z,1516705522.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:22.488Z,1516705522.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:05:22.489Z,1516705522.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:22.870Z,1516705522.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:22.871Z,1516705522.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:22.885Z,1516705522.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:05:22.886Z,1516705522.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:23.246Z,1516705523.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:23.256Z,1516705523.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:23.276Z,1516705523.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:05:23.277Z,1516705523.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:23.647Z,1516705523.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:23.659Z,1516705523.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:23.673Z,1516705523.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:05:23.674Z,1516705523.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:24.046Z,1516705524.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.055Z,1516705524.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.077Z,1516705524.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:05:24.078Z,1516705524.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:24.444Z,1516705524.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.446Z,1516705524.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.477Z,1516705524.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:05:24.478Z,1516705524.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:24.865Z,1516705524.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.866Z,1516705524.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:24.880Z,1516705524.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:05:24.881Z,1516705524.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:25.259Z,1516705525.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:25.260Z,1516705525.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:25.285Z,1516705525.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:05:25.286Z,1516705525.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:25.660Z,1516705525.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:25.662Z,1516705525.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:25.689Z,1516705525.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:05:25.690Z,1516705525.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:26.045Z,1516705526.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.046Z,1516705526.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.079Z,1516705526.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:05:26.080Z,1516705526.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:26.444Z,1516705526.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.446Z,1516705526.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.454Z,1516705526.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x41633 got:0x7234 2018-01-23T11:05:26.484Z,1516705526.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:05:26.485Z,1516705526.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:26.851Z,1516705526.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.852Z,1516705526.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:26.884Z,1516705526.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:05:26.885Z,1516705526.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:27.245Z,1516705527.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:27.246Z,1516705527.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:27.285Z,1516705527.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:05:27.286Z,1516705527.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:27.644Z,1516705527.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:27.645Z,1516705527.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:27.693Z,1516705527.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:05:27.694Z,1516705527.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:28.061Z,1516705528.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.062Z,1516705528.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.092Z,1516705528.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:05:28.093Z,1516705528.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:28.458Z,1516705528.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.459Z,1516705528.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.490Z,1516705528.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:05:28.491Z,1516705528.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:28.860Z,1516705528.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.861Z,1516705528.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:28.890Z,1516705528.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:05:28.892Z,1516705528.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:29.245Z,1516705529.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:29.246Z,1516705529.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:29.292Z,1516705529.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:05:29.293Z,1516705529.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:29.646Z,1516705529.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:29.648Z,1516705529.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:29.683Z,1516705529.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:05:29.684Z,1516705529.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:30.047Z,1516705530.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:30.048Z,1516705530.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:30.062Z,1516705530.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T11:05:30.063Z,1516705530.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:30.452Z,1516705530.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:30.453Z,1516705530.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:30.500Z,1516705530.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:05:30.501Z,1516705530.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:30.861Z,1516705530.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:30.891Z,1516705530.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:05:30.892Z,1516705530.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:31.261Z,1516705531.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:31.292Z,1516705531.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:05:31.293Z,1516705531.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:31.663Z,1516705531.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:31.694Z,1516705531.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:32.053Z,1516705532.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:32.098Z,1516705532.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:32.449Z,1516705532.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:32.469Z,1516705532.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:32.851Z,1516705532.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:32.873Z,1516705532.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:33.252Z,1516705533.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:33.280Z,1516705533.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:33.651Z,1516705533.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:33.700Z,1516705533.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:34.058Z,1516705534.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:34.068Z,1516705534.068 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T11:05:34.103Z,1516705534.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:34.461Z,1516705534.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:34.469Z,1516705534.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x14199 got:0x7618 2018-01-23T11:05:34.504Z,1516705534.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:34.861Z,1516705534.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:34.876Z,1516705534.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:35.251Z,1516705535.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:35.286Z,1516705535.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:35.657Z,1516705535.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:35.676Z,1516705535.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:36.049Z,1516705536.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:36.078Z,1516705536.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:36.456Z,1516705536.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:36.470Z,1516705536.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:36.863Z,1516705536.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:36.903Z,1516705536.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:37.263Z,1516705537.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:37.282Z,1516705537.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:37.664Z,1516705537.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:37.685Z,1516705537.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:38.057Z,1516705538.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:38.072Z,1516705538.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:38.448Z,1516705538.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:38.490Z,1516705538.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:38.863Z,1516705538.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:38.882Z,1516705538.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:39.264Z,1516705539.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:39.281Z,1516705539.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:39.661Z,1516705539.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:39.685Z,1516705539.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:40.053Z,1516705540.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:40.094Z,1516705540.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:40.454Z,1516705540.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:40.469Z,1516705540.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:40.865Z,1516705540.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:40.887Z,1516705540.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:41.265Z,1516705541.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:41.288Z,1516705541.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:41.666Z,1516705541.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:41.707Z,1516705541.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:42.047Z,1516705542.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:42.063Z,1516705542.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:42.455Z,1516705542.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:42.478Z,1516705542.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:42.861Z,1516705542.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:42.878Z,1516705542.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:43.258Z,1516705543.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:43.304Z,1516705543.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:43.660Z,1516705543.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:43.676Z,1516705543.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:44.055Z,1516705544.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:44.073Z,1516705544.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:44.450Z,1516705544.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:44.473Z,1516705544.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:44.859Z,1516705544.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:44.874Z,1516705544.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:45.260Z,1516705545.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:45.283Z,1516705545.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:45.680Z,1516705545.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:45.712Z,1516705545.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:46.048Z,1516705546.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:46.099Z,1516705546.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:46.454Z,1516705546.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:46.481Z,1516705546.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:46.873Z,1516705546.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:46.908Z,1516705546.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:47.260Z,1516705547.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:47.280Z,1516705547.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:47.665Z,1516705547.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:47.682Z,1516705547.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:48.052Z,1516705548.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:48.106Z,1516705548.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:48.455Z,1516705548.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:48.477Z,1516705548.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:48.863Z,1516705548.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:48.883Z,1516705548.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:49.260Z,1516705549.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:49.286Z,1516705549.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:49.660Z,1516705549.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:49.687Z,1516705549.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:50.058Z,1516705550.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:50.073Z,1516705550.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:50.442Z,1516705550.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:50.479Z,1516705550.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:50.864Z,1516705550.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:50.882Z,1516705550.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:51.268Z,1516705551.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:51.282Z,1516705551.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:51.665Z,1516705551.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:51.729Z,1516705551.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:52.045Z,1516705552.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:52.072Z,1516705552.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:52.444Z,1516705552.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:52.484Z,1516705552.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:52.864Z,1516705552.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:52.879Z,1516705552.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:53.266Z,1516705553.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:53.281Z,1516705553.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:53.663Z,1516705553.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:53.681Z,1516705553.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:54.056Z,1516705554.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:54.085Z,1516705554.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:54.450Z,1516705554.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:54.501Z,1516705554.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:54.878Z,1516705554.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:54.908Z,1516705554.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:55.285Z,1516705555.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:55.302Z,1516705555.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:55.680Z,1516705555.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:55.705Z,1516705555.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:56.051Z,1516705556.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:56.098Z,1516705556.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:56.450Z,1516705556.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:56.494Z,1516705556.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:56.870Z,1516705556.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:56.902Z,1516705556.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:57.289Z,1516705557.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:57.304Z,1516705557.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:57.668Z,1516705557.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:57.742Z,1516705557.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:58.061Z,1516705558.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:58.097Z,1516705558.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:58.459Z,1516705558.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:58.534Z,1516705558.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:58.865Z,1516705558.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:58.909Z,1516705558.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:59.281Z,1516705559.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:59.310Z,1516705559.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:05:59.661Z,1516705559.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:05:59.701Z,1516705559.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:00.058Z,1516705560.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:00.077Z,1516705560.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:00.475Z,1516705560.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:00.514Z,1516705560.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:00.866Z,1516705560.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:00.920Z,1516705560.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:01.272Z,1516705561.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:01.321Z,1516705561.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:01.670Z,1516705561.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:01.689Z,1516705561.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:02.051Z,1516705562.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:02.126Z,1516705562.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:02.450Z,1516705562.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:02.497Z,1516705562.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:02.862Z,1516705562.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:02.901Z,1516705562.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:03.274Z,1516705563.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:03.335Z,1516705563.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:03.670Z,1516705563.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:03.701Z,1516705563.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:04.059Z,1516705564.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:04.103Z,1516705564.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:04.460Z,1516705564.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:04.516Z,1516705564.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:04.864Z,1516705564.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:04.885Z,1516705564.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:05.290Z,1516705565.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:05.330Z,1516705565.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:05.671Z,1516705565.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:05.718Z,1516705565.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:06.060Z,1516705566.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:06.089Z,1516705566.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:06.450Z,1516705566.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:06.477Z,1516705566.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:06.885Z,1516705566.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:06.953Z,1516705566.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:07.270Z,1516705567.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:07.293Z,1516705567.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:07.685Z,1516705567.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:07.709Z,1516705567.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:08.052Z,1516705568.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:08.095Z,1516705568.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:08.458Z,1516705568.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:08.530Z,1516705568.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:08.866Z,1516705568.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:08.893Z,1516705568.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:09.274Z,1516705569.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:09.293Z,1516705569.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:09.656Z,1516705569.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:09.671Z,1516705569.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:10.052Z,1516705570.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:10.067Z,1516705570.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:10.449Z,1516705570.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:10.473Z,1516705570.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:10.868Z,1516705570.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:10.898Z,1516705570.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:11.260Z,1516705571.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:11.274Z,1516705571.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:11.656Z,1516705571.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:11.671Z,1516705571.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:12.052Z,1516705572.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:12.067Z,1516705572.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:12.452Z,1516705572.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:12.467Z,1516705572.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:12.852Z,1516705572.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:12.869Z,1516705572.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:13.256Z,1516705573.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:13.271Z,1516705573.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:13.660Z,1516705573.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:13.674Z,1516705573.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:14.068Z,1516705574.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:14.103Z,1516705574.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:14.457Z,1516705574.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:14.472Z,1516705574.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:14.852Z,1516705574.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:14.867Z,1516705574.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:15.248Z,1516705575.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:15.281Z,1516705575.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:15.657Z,1516705575.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:15.673Z,1516705575.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:16.064Z,1516705576.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:16.079Z,1516705576.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:16.463Z,1516705576.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:16.485Z,1516705576.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:16.863Z,1516705576.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:16.878Z,1516705576.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:17.248Z,1516705577.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:17.266Z,1516705577.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:17.275Z,1516705577.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:01:17.2Z 2018-01-23T11:06:17.275Z,1516705577.275 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:06:17.275Z,1516705577.275 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:06:17.645Z,1516705577.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:17.683Z,1516705577.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:18.190Z,1516705578.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:18.221Z,1516705578.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:18.445Z,1516705578.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:18.489Z,1516705578.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:21.624Z,1516705581.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:21.641Z,1516705581.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:27.041Z,1516705587.041 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0184.lzma 2018-01-23T11:06:27.079Z,1516705587.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:27.095Z,1516705587.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:27.217Z,1516705587.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:27.249Z,1516705587.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:27.987Z,1516705587.987 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0184.lzma.bak 2018-01-23T11:06:27.987Z,1516705587.987 [DataOverHttps](INFO): SBD MOMSN=7755469 2018-01-23T11:06:28.027Z,1516705588.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:28.041Z,1516705588.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:28.378Z,1516705588.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:28.393Z,1516705588.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:28.528Z,1516705588.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:28.567Z,1516705588.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:31.628Z,1516705591.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:31.643Z,1516705591.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:31.767Z,1516705591.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:31.788Z,1516705591.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:32.126Z,1516705592.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:32.173Z,1516705592.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:32.525Z,1516705592.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:32.545Z,1516705592.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:32.919Z,1516705592.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:32.939Z,1516705592.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:33.310Z,1516705593.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:33.345Z,1516705593.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:36.483Z,1516705596.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:36.498Z,1516705596.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:36.576Z,1516705596.576 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0185.lzma 2018-01-23T11:06:36.607Z,1516705596.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:36.651Z,1516705596.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:36.000Z,1516705597.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:37.035Z,1516705597.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:37.362Z,1516705597.362 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0185.lzma.bak 2018-01-23T11:06:37.362Z,1516705597.362 [DataOverHttps](INFO): SBD MOMSN=7755471 2018-01-23T11:06:37.411Z,1516705597.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:37.444Z,1516705597.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:38.026Z,1516705598.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:38.041Z,1516705598.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:38.044Z,1516705598.044 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:06:38.044Z,1516705598.044 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:06:38.044Z,1516705598.044 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:06:38.200Z,1516705598.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:38.235Z,1516705598.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:41.283Z,1516705601.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:41.298Z,1516705601.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:41.407Z,1516705601.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:41.435Z,1516705601.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:41.761Z,1516705601.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:41.795Z,1516705601.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:42.162Z,1516705602.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:42.192Z,1516705602.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:42.546Z,1516705602.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:42.588Z,1516705602.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:42.946Z,1516705602.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:42.979Z,1516705602.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:43.350Z,1516705603.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:43.369Z,1516705603.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:43.750Z,1516705603.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:43.768Z,1516705603.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:44.152Z,1516705604.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:44.195Z,1516705604.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:44.555Z,1516705604.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:44.600Z,1516705604.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:44.965Z,1516705604.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:44.998Z,1516705604.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:45.349Z,1516705605.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:45.397Z,1516705605.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:45.750Z,1516705605.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:45.777Z,1516705605.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:46.148Z,1516705606.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:46.168Z,1516705606.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:46.549Z,1516705606.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:46.565Z,1516705606.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:46.956Z,1516705606.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:46.973Z,1516705606.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:47.354Z,1516705607.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:47.401Z,1516705607.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:47.754Z,1516705607.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:47.778Z,1516705607.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:48.154Z,1516705608.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:48.173Z,1516705608.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:48.545Z,1516705608.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:48.571Z,1516705608.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:48.959Z,1516705608.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:48.974Z,1516705608.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:49.359Z,1516705609.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:49.383Z,1516705609.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:49.759Z,1516705609.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:49.782Z,1516705609.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:50.148Z,1516705610.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:50.181Z,1516705610.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:50.555Z,1516705610.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:50.576Z,1516705610.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:50.964Z,1516705610.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:50.979Z,1516705610.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:51.364Z,1516705611.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:51.384Z,1516705611.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:51.756Z,1516705611.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:51.802Z,1516705611.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:52.145Z,1516705612.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:52.173Z,1516705612.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:52.540Z,1516705612.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:52.577Z,1516705612.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:52.965Z,1516705612.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:52.984Z,1516705612.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:53.355Z,1516705613.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:53.388Z,1516705613.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:53.756Z,1516705613.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:53.778Z,1516705613.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:54.142Z,1516705614.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:54.173Z,1516705614.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:54.538Z,1516705614.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:54.554Z,1516705614.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:54.952Z,1516705614.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:54.984Z,1516705614.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:55.364Z,1516705615.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:55.397Z,1516705615.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:55.760Z,1516705615.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:55.787Z,1516705615.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:56.154Z,1516705616.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:56.193Z,1516705616.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:56.553Z,1516705616.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:56.588Z,1516705616.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:56.960Z,1516705616.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:56.995Z,1516705616.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:57.356Z,1516705617.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:57.371Z,1516705617.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:57.764Z,1516705617.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:57.803Z,1516705617.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:58.148Z,1516705618.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:58.163Z,1516705618.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:58.546Z,1516705618.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:58.568Z,1516705618.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:58.952Z,1516705618.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:58.967Z,1516705618.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:59.356Z,1516705619.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:59.371Z,1516705619.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:06:59.754Z,1516705619.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:06:59.795Z,1516705619.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:00.148Z,1516705620.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:00.170Z,1516705620.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:00.548Z,1516705620.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:00.563Z,1516705620.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:00.954Z,1516705620.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:00.969Z,1516705620.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:01.356Z,1516705621.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:01.371Z,1516705621.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:01.754Z,1516705621.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:01.769Z,1516705621.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:02.145Z,1516705622.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:02.173Z,1516705622.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:02.548Z,1516705622.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:02.585Z,1516705622.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:02.964Z,1516705622.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:02.981Z,1516705622.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:03.364Z,1516705623.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:03.379Z,1516705623.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:03.756Z,1516705623.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:03.789Z,1516705623.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:04.141Z,1516705624.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:04.168Z,1516705624.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:04.540Z,1516705624.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:04.577Z,1516705624.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:04.965Z,1516705624.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:04.981Z,1516705624.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:05.360Z,1516705625.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:05.391Z,1516705625.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:05.755Z,1516705625.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:05.778Z,1516705625.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:06.142Z,1516705626.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:06.173Z,1516705626.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:06.541Z,1516705626.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:06.577Z,1516705626.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:06.952Z,1516705626.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:06.990Z,1516705626.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:07.379Z,1516705627.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:07.395Z,1516705627.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:07.765Z,1516705627.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:07.780Z,1516705627.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:08.142Z,1516705628.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:08.177Z,1516705628.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:08.545Z,1516705628.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:08.546Z,1516705628.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:08.581Z,1516705628.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:08.953Z,1516705628.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:08.954Z,1516705628.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:08.985Z,1516705628.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:09.360Z,1516705629.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:09.361Z,1516705629.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:09.391Z,1516705629.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:09.756Z,1516705629.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:09.757Z,1516705629.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:09.793Z,1516705629.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:10.152Z,1516705630.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:10.153Z,1516705630.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:10.189Z,1516705630.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:10.558Z,1516705630.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:10.559Z,1516705630.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:10.598Z,1516705630.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:10.964Z,1516705630.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:10.965Z,1516705630.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:11.003Z,1516705631.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:11.356Z,1516705631.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:11.357Z,1516705631.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:11.377Z,1516705631.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:11.755Z,1516705631.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:11.756Z,1516705631.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:11.771Z,1516705631.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:12.152Z,1516705632.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.153Z,1516705632.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.167Z,1516705632.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:12.546Z,1516705632.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.547Z,1516705632.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.592Z,1516705632.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:12.961Z,1516705632.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.962Z,1516705632.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:12.982Z,1516705632.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:13.359Z,1516705633.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:13.360Z,1516705633.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:13.374Z,1516705633.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:13.760Z,1516705633.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:13.761Z,1516705633.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:13.781Z,1516705633.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:14.148Z,1516705634.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.149Z,1516705634.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.181Z,1516705634.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:14.568Z,1516705634.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.569Z,1516705634.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.584Z,1516705634.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:14.940Z,1516705634.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.942Z,1516705634.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:14.973Z,1516705634.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:15.360Z,1516705635.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:15.361Z,1516705635.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:15.381Z,1516705635.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:15.764Z,1516705635.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:15.765Z,1516705635.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:15.785Z,1516705635.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:16.160Z,1516705636.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.161Z,1516705636.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.176Z,1516705636.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:16.540Z,1516705636.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.541Z,1516705636.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.578Z,1516705636.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:16.940Z,1516705636.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.941Z,1516705636.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:16.981Z,1516705636.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:17.342Z,1516705637.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:17.343Z,1516705637.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:17.358Z,1516705637.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:17.740Z,1516705637.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:17.741Z,1516705637.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:17.761Z,1516705637.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:18.160Z,1516705638.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.161Z,1516705638.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.188Z,1516705638.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:18.564Z,1516705638.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.565Z,1516705638.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.597Z,1516705638.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:18.964Z,1516705638.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.965Z,1516705638.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:18.997Z,1516705638.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:19.349Z,1516705639.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:19.350Z,1516705639.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:19.364Z,1516705639.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:19.749Z,1516705639.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:19.750Z,1516705639.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:19.789Z,1516705639.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:20.148Z,1516705640.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.149Z,1516705640.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.169Z,1516705640.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:20.550Z,1516705640.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.551Z,1516705640.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.565Z,1516705640.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:20.946Z,1516705640.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.948Z,1516705640.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:20.966Z,1516705640.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:21.359Z,1516705641.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:21.360Z,1516705641.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:21.374Z,1516705641.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:21.762Z,1516705641.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:21.763Z,1516705641.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:21.777Z,1516705641.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:22.159Z,1516705642.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.160Z,1516705642.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.174Z,1516705642.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:22.544Z,1516705642.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.544Z,1516705642.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.579Z,1516705642.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:22.948Z,1516705642.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.949Z,1516705642.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:22.977Z,1516705642.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:23.348Z,1516705643.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:23.349Z,1516705643.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:23.370Z,1516705643.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:23.743Z,1516705643.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:23.744Z,1516705643.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:23.780Z,1516705643.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:24.159Z,1516705644.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.160Z,1516705644.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.174Z,1516705644.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:24.562Z,1516705644.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.563Z,1516705644.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.577Z,1516705644.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:24.959Z,1516705644.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.960Z,1516705644.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:24.974Z,1516705644.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:25.348Z,1516705645.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:25.349Z,1516705645.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:25.380Z,1516705645.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:25.740Z,1516705645.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:25.742Z,1516705645.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:25.778Z,1516705645.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:26.140Z,1516705646.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.141Z,1516705646.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.181Z,1516705646.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:26.545Z,1516705646.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.546Z,1516705646.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.587Z,1516705646.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:26.944Z,1516705646.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.946Z,1516705646.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:26.982Z,1516705646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:27.368Z,1516705647.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:27.369Z,1516705647.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:27.384Z,1516705647.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:27.755Z,1516705647.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:27.756Z,1516705647.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:27.791Z,1516705647.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:28.156Z,1516705648.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.157Z,1516705648.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.185Z,1516705648.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:28.540Z,1516705648.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.541Z,1516705648.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.577Z,1516705648.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:28.944Z,1516705648.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.945Z,1516705648.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:28.960Z,1516705648.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:29.345Z,1516705649.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:29.346Z,1516705649.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:29.361Z,1516705649.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:29.748Z,1516705649.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:29.749Z,1516705649.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:29.789Z,1516705649.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:30.160Z,1516705650.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.161Z,1516705650.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.194Z,1516705650.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:30.560Z,1516705650.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.561Z,1516705650.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.595Z,1516705650.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:30.964Z,1516705650.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.965Z,1516705650.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:30.995Z,1516705650.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:31.345Z,1516705651.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:31.346Z,1516705651.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:31.381Z,1516705651.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:31.746Z,1516705651.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:31.747Z,1516705651.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:31.762Z,1516705651.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:32.146Z,1516705652.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.147Z,1516705652.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.173Z,1516705652.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:32.550Z,1516705652.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.551Z,1516705652.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.565Z,1516705652.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:32.946Z,1516705652.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.948Z,1516705652.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:32.968Z,1516705652.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:33.324Z,1516705653.324 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T11:07:33.324Z,1516705653.324 [NAL9602] Data Fault, FailCount= 3 2018-01-23T11:07:33.324Z,1516705653.324 [NAL9602](ERROR): Data Fault 2018-01-23T11:07:33.352Z,1516705653.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:33.353Z,1516705653.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:33.387Z,1516705653.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:33.413Z,1516705653.413 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T11:07:33.724Z,1516705653.724 [NAL9602](INFO): Powering down 2018-01-23T11:07:33.745Z,1516705653.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:33.746Z,1516705653.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:33.785Z,1516705653.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:34.152Z,1516705654.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.153Z,1516705654.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.168Z,1516705654.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:34.548Z,1516705654.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.549Z,1516705654.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.563Z,1516705654.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:34.575Z,1516705654.575 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T11:07:34.575Z,1516705654.575 [NAL9602] No Fault, FailCount= 3 2018-01-23T11:07:34.948Z,1516705654.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.949Z,1516705654.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:34.963Z,1516705654.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:35.348Z,1516705655.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:35.349Z,1516705655.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:35.364Z,1516705655.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:35.748Z,1516705655.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:35.749Z,1516705655.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:35.763Z,1516705655.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:36.145Z,1516705656.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.146Z,1516705656.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.160Z,1516705656.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:36.548Z,1516705656.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.549Z,1516705656.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.564Z,1516705656.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:36.954Z,1516705656.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.955Z,1516705656.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:36.977Z,1516705656.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:37.345Z,1516705657.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:37.346Z,1516705657.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:37.360Z,1516705657.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:37.748Z,1516705657.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:37.749Z,1516705657.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:37.764Z,1516705657.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:38.148Z,1516705658.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:38.149Z,1516705658.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:38.169Z,1516705658.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:38.549Z,1516705658.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:38.550Z,1516705658.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:38.563Z,1516705658.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:41.640Z,1516705661.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:41.642Z,1516705661.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:41.657Z,1516705661.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:41.766Z,1516705661.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:41.767Z,1516705661.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:41.805Z,1516705661.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:42.111Z,1516705662.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.112Z,1516705662.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.125Z,1516705662.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:42.507Z,1516705662.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.508Z,1516705662.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.522Z,1516705662.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:42.908Z,1516705662.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.910Z,1516705662.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:42.924Z,1516705662.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:43.305Z,1516705663.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:43.306Z,1516705663.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:43.338Z,1516705663.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:43.711Z,1516705663.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:43.712Z,1516705663.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:43.726Z,1516705663.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:44.108Z,1516705664.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.109Z,1516705664.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.124Z,1516705664.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:44.514Z,1516705664.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.515Z,1516705664.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.529Z,1516705664.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:44.910Z,1516705664.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.912Z,1516705664.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:44.926Z,1516705664.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:45.309Z,1516705665.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:45.310Z,1516705665.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:45.325Z,1516705665.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:45.708Z,1516705665.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:45.709Z,1516705665.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:45.725Z,1516705665.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:46.108Z,1516705666.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.109Z,1516705666.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.124Z,1516705666.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:46.508Z,1516705666.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.509Z,1516705666.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.524Z,1516705666.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:46.908Z,1516705666.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.909Z,1516705666.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:46.923Z,1516705666.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:47.306Z,1516705667.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:47.307Z,1516705667.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:47.342Z,1516705667.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:47.710Z,1516705667.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:47.711Z,1516705667.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:47.726Z,1516705667.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:48.109Z,1516705668.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.110Z,1516705668.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.124Z,1516705668.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:48.508Z,1516705668.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.509Z,1516705668.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.524Z,1516705668.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:48.908Z,1516705668.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.909Z,1516705668.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:48.924Z,1516705668.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:49.309Z,1516705669.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:49.309Z,1516705669.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:49.323Z,1516705669.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:49.708Z,1516705669.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:49.709Z,1516705669.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:49.723Z,1516705669.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:50.108Z,1516705670.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.109Z,1516705670.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.124Z,1516705670.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:50.508Z,1516705670.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.509Z,1516705670.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.523Z,1516705670.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:50.908Z,1516705670.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.909Z,1516705670.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:50.923Z,1516705670.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:51.308Z,1516705671.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:51.309Z,1516705671.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:51.324Z,1516705671.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:51.707Z,1516705671.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:51.708Z,1516705671.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:51.722Z,1516705671.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:52.108Z,1516705672.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.109Z,1516705672.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.123Z,1516705672.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:52.508Z,1516705672.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.509Z,1516705672.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.523Z,1516705672.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:52.908Z,1516705672.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.909Z,1516705672.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:52.923Z,1516705672.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:53.303Z,1516705673.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:53.304Z,1516705673.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:53.329Z,1516705673.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:53.711Z,1516705673.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:53.712Z,1516705673.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:53.726Z,1516705673.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:54.110Z,1516705674.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.118Z,1516705674.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.132Z,1516705674.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:54.508Z,1516705674.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.508Z,1516705674.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.522Z,1516705674.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:54.908Z,1516705674.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.909Z,1516705674.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:54.923Z,1516705674.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:55.306Z,1516705675.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:55.307Z,1516705675.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:55.333Z,1516705675.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:55.708Z,1516705675.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:55.709Z,1516705675.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:55.723Z,1516705675.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:56.108Z,1516705676.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.109Z,1516705676.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.124Z,1516705676.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:56.506Z,1516705676.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.507Z,1516705676.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.535Z,1516705676.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:56.908Z,1516705676.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.909Z,1516705676.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:56.923Z,1516705676.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:57.308Z,1516705677.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:57.309Z,1516705677.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:57.324Z,1516705677.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:57.708Z,1516705677.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:57.709Z,1516705677.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:57.723Z,1516705677.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:58.108Z,1516705678.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.109Z,1516705678.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.123Z,1516705678.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:58.508Z,1516705678.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.509Z,1516705678.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.523Z,1516705678.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:58.907Z,1516705678.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.908Z,1516705678.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:58.928Z,1516705678.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:59.303Z,1516705679.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:59.304Z,1516705679.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:59.331Z,1516705679.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:07:59.708Z,1516705679.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:59.709Z,1516705679.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:07:59.723Z,1516705679.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:00.106Z,1516705680.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.107Z,1516705680.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.135Z,1516705680.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:00.505Z,1516705680.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.506Z,1516705680.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.520Z,1516705680.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:00.908Z,1516705680.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.909Z,1516705680.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:00.923Z,1516705680.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:01.307Z,1516705681.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:01.308Z,1516705681.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:01.322Z,1516705681.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:01.708Z,1516705681.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:01.709Z,1516705681.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:01.723Z,1516705681.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:02.108Z,1516705682.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.109Z,1516705682.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.123Z,1516705682.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:02.507Z,1516705682.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.508Z,1516705682.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.522Z,1516705682.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:02.911Z,1516705682.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.912Z,1516705682.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:02.926Z,1516705682.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:03.308Z,1516705683.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:03.309Z,1516705683.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:03.324Z,1516705683.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:03.706Z,1516705683.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:03.707Z,1516705683.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:03.734Z,1516705683.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:04.084Z,1516705684.084 [NAL9602](INFO): Powering up NAL9602 2018-01-23T11:08:04.108Z,1516705684.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.109Z,1516705684.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.135Z,1516705684.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:04.516Z,1516705684.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.517Z,1516705684.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.531Z,1516705684.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:04.908Z,1516705684.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.909Z,1516705684.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:04.923Z,1516705684.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:05.308Z,1516705685.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:05.309Z,1516705685.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:05.322Z,1516705685.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:05.704Z,1516705685.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:05.705Z,1516705685.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:05.735Z,1516705685.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:06.100Z,1516705686.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.101Z,1516705686.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.127Z,1516705686.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:06.500Z,1516705686.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.501Z,1516705686.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.527Z,1516705686.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:06.900Z,1516705686.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.901Z,1516705686.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:06.938Z,1516705686.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:07.300Z,1516705687.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:07.301Z,1516705687.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:07.328Z,1516705687.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:07.700Z,1516705687.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:07.701Z,1516705687.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:07.727Z,1516705687.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:08.100Z,1516705688.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.101Z,1516705688.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.137Z,1516705688.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:08.504Z,1516705688.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.505Z,1516705688.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.531Z,1516705688.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:08.904Z,1516705688.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.905Z,1516705688.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:08.931Z,1516705688.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:09.304Z,1516705689.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:09.306Z,1516705689.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:09.337Z,1516705689.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:09.700Z,1516705689.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:09.701Z,1516705689.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:09.740Z,1516705689.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:10.100Z,1516705690.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.101Z,1516705690.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.134Z,1516705690.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:10.504Z,1516705690.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.506Z,1516705690.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.537Z,1516705690.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:10.899Z,1516705690.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.900Z,1516705690.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:10.946Z,1516705690.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:11.297Z,1516705691.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:11.298Z,1516705691.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:11.325Z,1516705691.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:11.700Z,1516705691.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:11.701Z,1516705691.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:11.738Z,1516705691.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:12.100Z,1516705692.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.101Z,1516705692.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.128Z,1516705692.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:12.128Z,1516705692.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157 2018-01-23T11:08:12.128Z,1516705692.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:08:12.130Z,1516705692.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:12.130Z,1516705692.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 157 2018-01-23T11:08:12.130Z,1516705692.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:08:12.132Z,1516705692.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:12.132Z,1516705692.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157 2018-01-23T11:08:12.132Z,1516705692.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:08:12.148Z,1516705692.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:08:12.148Z,1516705692.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:08:12.148Z,1516705692.148 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:08:12.500Z,1516705692.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.501Z,1516705692.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.537Z,1516705692.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:08:12.537Z,1516705692.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157 2018-01-23T11:08:12.538Z,1516705692.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:08:12.538Z,1516705692.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 157 2018-01-23T11:08:12.538Z,1516705692.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:08:12.538Z,1516705692.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157 2018-01-23T11:08:12.913Z,1516705692.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.914Z,1516705692.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:12.948Z,1516705692.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:08:12.949Z,1516705692.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:08:12.949Z,1516705692.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:08:12.949Z,1516705692.949 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:08:12.950Z,1516705692.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:08:12.950Z,1516705692.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:08:12.950Z,1516705692.950 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:08:12.955Z,1516705692.955 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:08:12.955Z,1516705692.955 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:08:13.304Z,1516705693.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:13.305Z,1516705693.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:13.327Z,1516705693.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:08:13.328Z,1516705693.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:13.708Z,1516705693.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:13.709Z,1516705693.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:13.722Z,1516705693.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:08:13.723Z,1516705693.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:14.114Z,1516705694.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.115Z,1516705694.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.129Z,1516705694.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:08:14.129Z,1516705694.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:14.512Z,1516705694.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.513Z,1516705694.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.535Z,1516705694.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:08:14.536Z,1516705694.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:14.884Z,1516705694.884 [NAL9602](INFO): NAL9602 initialized 2018-01-23T11:08:14.908Z,1516705694.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.909Z,1516705694.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:14.940Z,1516705694.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:08:14.941Z,1516705694.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:15.304Z,1516705695.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:15.305Z,1516705695.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:15.335Z,1516705695.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:08:15.336Z,1516705695.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:15.721Z,1516705695.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:15.722Z,1516705695.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:15.740Z,1516705695.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:08:15.741Z,1516705695.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:16.124Z,1516705696.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.125Z,1516705696.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.144Z,1516705696.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:08:16.145Z,1516705696.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:16.518Z,1516705696.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.520Z,1516705696.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.534Z,1516705696.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:08:16.535Z,1516705696.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:16.901Z,1516705696.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.902Z,1516705696.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:16.936Z,1516705696.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:08:16.937Z,1516705696.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:17.305Z,1516705697.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:17.306Z,1516705697.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:17.333Z,1516705697.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:08:17.334Z,1516705697.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:17.701Z,1516705697.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:17.702Z,1516705697.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:17.736Z,1516705697.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:08:17.737Z,1516705697.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:18.111Z,1516705698.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.112Z,1516705698.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.152Z,1516705698.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:08:18.153Z,1516705698.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:18.511Z,1516705698.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.512Z,1516705698.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.550Z,1516705698.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:08:18.551Z,1516705698.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:18.911Z,1516705698.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.913Z,1516705698.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:18.948Z,1516705698.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:08:18.949Z,1516705698.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:19.301Z,1516705699.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:19.302Z,1516705699.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:19.340Z,1516705699.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:08:19.341Z,1516705699.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:19.700Z,1516705699.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:19.701Z,1516705699.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:19.740Z,1516705699.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:08:19.741Z,1516705699.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:20.101Z,1516705700.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.102Z,1516705700.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.116Z,1516705700.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:08:20.117Z,1516705700.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:20.512Z,1516705700.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.513Z,1516705700.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.553Z,1516705700.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:08:20.554Z,1516705700.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:20.923Z,1516705700.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.924Z,1516705700.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:20.947Z,1516705700.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:08:20.948Z,1516705700.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:21.319Z,1516705701.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:21.320Z,1516705701.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:21.354Z,1516705701.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:08:21.356Z,1516705701.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:21.724Z,1516705701.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:21.724Z,1516705701.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:21.748Z,1516705701.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:08:21.749Z,1516705701.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:22.106Z,1516705702.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.107Z,1516705702.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.129Z,1516705702.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:08:22.130Z,1516705702.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:22.509Z,1516705702.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.510Z,1516705702.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.528Z,1516705702.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:08:22.529Z,1516705702.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:22.909Z,1516705702.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.909Z,1516705702.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:22.924Z,1516705702.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:08:22.925Z,1516705702.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:23.305Z,1516705703.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:23.306Z,1516705703.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:23.336Z,1516705703.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:08:23.337Z,1516705703.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:23.709Z,1516705703.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:23.710Z,1516705703.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:23.725Z,1516705703.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:08:23.725Z,1516705703.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:24.136Z,1516705704.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.137Z,1516705704.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.167Z,1516705704.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:08:24.168Z,1516705704.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:24.524Z,1516705704.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.525Z,1516705704.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.539Z,1516705704.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:08:24.540Z,1516705704.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:24.920Z,1516705704.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.921Z,1516705704.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:24.936Z,1516705704.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:08:24.937Z,1516705704.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:25.301Z,1516705705.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:25.302Z,1516705705.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:25.337Z,1516705705.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:08:25.338Z,1516705705.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:25.700Z,1516705705.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:25.701Z,1516705705.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:25.733Z,1516705705.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:08:25.734Z,1516705705.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:26.101Z,1516705706.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.102Z,1516705706.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.129Z,1516705706.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:08:26.130Z,1516705706.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:26.508Z,1516705706.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.509Z,1516705706.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.544Z,1516705706.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:08:26.545Z,1516705706.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:26.911Z,1516705706.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.912Z,1516705706.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:26.949Z,1516705706.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:08:26.950Z,1516705706.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:27.315Z,1516705707.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:27.316Z,1516705707.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:27.353Z,1516705707.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:08:27.354Z,1516705707.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:27.712Z,1516705707.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:27.713Z,1516705707.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:27.742Z,1516705707.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:08:27.743Z,1516705707.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:28.101Z,1516705708.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.102Z,1516705708.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.140Z,1516705708.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:08:28.141Z,1516705708.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:28.500Z,1516705708.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.501Z,1516705708.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.516Z,1516705708.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:08:28.517Z,1516705708.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:28.913Z,1516705708.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.914Z,1516705708.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:28.949Z,1516705708.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:08:28.950Z,1516705708.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:29.304Z,1516705709.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:29.305Z,1516705709.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:29.324Z,1516705709.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:08:29.325Z,1516705709.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:29.707Z,1516705709.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:29.708Z,1516705709.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:29.723Z,1516705709.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:08:29.724Z,1516705709.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:30.115Z,1516705710.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.116Z,1516705710.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.153Z,1516705710.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:08:30.154Z,1516705710.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:30.519Z,1516705710.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.520Z,1516705710.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.536Z,1516705710.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:08:30.537Z,1516705710.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:30.914Z,1516705710.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.915Z,1516705710.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:30.929Z,1516705710.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:08:30.930Z,1516705710.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:31.309Z,1516705711.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:31.310Z,1516705711.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:31.324Z,1516705711.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:08:31.325Z,1516705711.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:31.704Z,1516705711.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:31.705Z,1516705711.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:31.731Z,1516705711.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:08:31.732Z,1516705711.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:32.109Z,1516705712.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.110Z,1516705712.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.124Z,1516705712.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:08:32.125Z,1516705712.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:32.503Z,1516705712.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.504Z,1516705712.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.541Z,1516705712.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:32.923Z,1516705712.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.924Z,1516705712.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:32.938Z,1516705712.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:33.323Z,1516705713.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:33.324Z,1516705713.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:33.338Z,1516705713.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:33.720Z,1516705713.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:33.721Z,1516705713.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:33.736Z,1516705713.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:34.100Z,1516705714.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.101Z,1516705714.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.128Z,1516705714.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:34.500Z,1516705714.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.501Z,1516705714.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.538Z,1516705714.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:34.911Z,1516705714.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.912Z,1516705714.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:34.934Z,1516705714.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:35.301Z,1516705715.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:35.302Z,1516705715.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:35.337Z,1516705715.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:35.704Z,1516705715.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:35.705Z,1516705715.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:35.732Z,1516705715.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:36.120Z,1516705716.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.121Z,1516705716.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.136Z,1516705716.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:36.523Z,1516705716.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.524Z,1516705716.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.538Z,1516705716.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:36.914Z,1516705716.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.915Z,1516705716.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:36.942Z,1516705716.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:37.305Z,1516705717.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:37.305Z,1516705717.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:37.334Z,1516705717.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:37.700Z,1516705717.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:37.701Z,1516705717.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:37.737Z,1516705717.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:38.101Z,1516705718.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.102Z,1516705718.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.128Z,1516705718.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:38.501Z,1516705718.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.502Z,1516705718.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.517Z,1516705718.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:38.911Z,1516705718.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.912Z,1516705718.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:38.948Z,1516705718.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:42.037Z,1516705722.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.039Z,1516705722.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.053Z,1516705722.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:42.171Z,1516705722.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.172Z,1516705722.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.209Z,1516705722.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:42.509Z,1516705722.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.511Z,1516705722.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.525Z,1516705722.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:42.909Z,1516705722.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.910Z,1516705722.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:42.924Z,1516705722.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:43.301Z,1516705723.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:43.302Z,1516705723.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:43.325Z,1516705723.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:43.704Z,1516705723.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:43.705Z,1516705723.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:43.720Z,1516705723.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:44.111Z,1516705724.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.112Z,1516705724.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.126Z,1516705724.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:44.511Z,1516705724.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.512Z,1516705724.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.527Z,1516705724.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:44.908Z,1516705724.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.909Z,1516705724.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:44.929Z,1516705724.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:45.305Z,1516705725.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:45.306Z,1516705725.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:45.320Z,1516705725.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:45.704Z,1516705725.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:45.706Z,1516705725.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:45.725Z,1516705725.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:46.105Z,1516705726.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.106Z,1516705726.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.120Z,1516705726.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:46.505Z,1516705726.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.506Z,1516705726.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.520Z,1516705726.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:46.909Z,1516705726.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.910Z,1516705726.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:46.929Z,1516705726.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:47.311Z,1516705727.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:47.312Z,1516705727.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:47.327Z,1516705727.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:47.710Z,1516705727.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:47.711Z,1516705727.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:47.733Z,1516705727.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:48.106Z,1516705728.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.108Z,1516705728.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.122Z,1516705728.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:48.504Z,1516705728.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.505Z,1516705728.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.519Z,1516705728.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:48.905Z,1516705728.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.906Z,1516705728.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:48.920Z,1516705728.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:49.304Z,1516705729.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:49.305Z,1516705729.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:49.324Z,1516705729.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:49.704Z,1516705729.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:49.705Z,1516705729.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:49.719Z,1516705729.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:50.111Z,1516705730.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.112Z,1516705730.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.126Z,1516705730.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:50.515Z,1516705730.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.516Z,1516705730.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.530Z,1516705730.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:50.910Z,1516705730.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.911Z,1516705730.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:50.925Z,1516705730.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:51.305Z,1516705731.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:51.306Z,1516705731.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:51.320Z,1516705731.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:51.704Z,1516705731.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:51.705Z,1516705731.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:51.720Z,1516705731.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:52.110Z,1516705732.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.111Z,1516705732.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.125Z,1516705732.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:52.505Z,1516705732.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.506Z,1516705732.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.520Z,1516705732.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:52.910Z,1516705732.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.911Z,1516705732.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:52.925Z,1516705732.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:53.311Z,1516705733.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:53.312Z,1516705733.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:53.327Z,1516705733.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:53.710Z,1516705733.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:53.712Z,1516705733.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:53.725Z,1516705733.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:54.104Z,1516705734.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.106Z,1516705734.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.125Z,1516705734.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:54.504Z,1516705734.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.505Z,1516705734.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.533Z,1516705734.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:54.909Z,1516705734.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.910Z,1516705734.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:54.923Z,1516705734.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:55.304Z,1516705735.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:55.305Z,1516705735.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:55.325Z,1516705735.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:55.700Z,1516705735.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:55.700Z,1516705735.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:55.731Z,1516705735.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:56.116Z,1516705736.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.117Z,1516705736.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.131Z,1516705736.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:56.518Z,1516705736.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.519Z,1516705736.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.534Z,1516705736.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:56.911Z,1516705736.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.912Z,1516705736.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:56.927Z,1516705736.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:57.297Z,1516705737.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:57.298Z,1516705737.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:57.332Z,1516705737.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:57.697Z,1516705737.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:57.698Z,1516705737.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:57.734Z,1516705737.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:58.097Z,1516705738.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.098Z,1516705738.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.137Z,1516705738.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:58.500Z,1516705738.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.501Z,1516705738.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.542Z,1516705738.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:58.911Z,1516705738.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.912Z,1516705738.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:58.945Z,1516705738.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:59.311Z,1516705739.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:59.312Z,1516705739.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:59.348Z,1516705739.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:08:59.711Z,1516705739.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:59.712Z,1516705739.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:08:59.749Z,1516705739.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:00.100Z,1516705740.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.102Z,1516705740.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.138Z,1516705740.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:00.497Z,1516705740.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.498Z,1516705740.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.512Z,1516705740.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:00.897Z,1516705740.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.898Z,1516705740.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:00.916Z,1516705740.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:01.300Z,1516705741.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:01.301Z,1516705741.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:01.315Z,1516705741.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:01.709Z,1516705741.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:01.710Z,1516705741.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:01.749Z,1516705741.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:02.119Z,1516705742.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.120Z,1516705742.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.154Z,1516705742.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:02.516Z,1516705742.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.517Z,1516705742.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.550Z,1516705742.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:02.920Z,1516705742.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.921Z,1516705742.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:02.951Z,1516705742.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:03.308Z,1516705743.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:03.308Z,1516705743.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:03.322Z,1516705743.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:03.706Z,1516705743.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:03.707Z,1516705743.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:03.729Z,1516705743.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:04.107Z,1516705744.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.108Z,1516705744.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.123Z,1516705744.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:04.506Z,1516705744.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.507Z,1516705744.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.522Z,1516705744.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:04.908Z,1516705744.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.909Z,1516705744.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:04.924Z,1516705744.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:05.312Z,1516705745.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:05.313Z,1516705745.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:05.328Z,1516705745.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:05.711Z,1516705745.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:05.712Z,1516705745.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:05.726Z,1516705745.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:06.104Z,1516705746.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.105Z,1516705746.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.126Z,1516705746.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:06.501Z,1516705746.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.502Z,1516705746.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.543Z,1516705746.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:06.910Z,1516705746.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.911Z,1516705746.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:06.925Z,1516705746.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:07.305Z,1516705747.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:07.306Z,1516705747.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:07.321Z,1516705747.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:07.704Z,1516705747.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:07.705Z,1516705747.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:07.720Z,1516705747.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:08.110Z,1516705748.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.111Z,1516705748.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.126Z,1516705748.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:08.511Z,1516705748.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.512Z,1516705748.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.528Z,1516705748.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:08.910Z,1516705748.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.911Z,1516705748.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:08.925Z,1516705748.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:09.305Z,1516705749.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:09.306Z,1516705749.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:09.320Z,1516705749.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:09.704Z,1516705749.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:09.705Z,1516705749.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:09.719Z,1516705749.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:10.101Z,1516705750.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.102Z,1516705750.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.124Z,1516705750.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:10.505Z,1516705750.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.506Z,1516705750.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.520Z,1516705750.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:10.910Z,1516705750.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.911Z,1516705750.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:10.933Z,1516705750.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:11.313Z,1516705751.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:11.314Z,1516705751.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:11.333Z,1516705751.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:11.716Z,1516705751.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:11.717Z,1516705751.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:11.737Z,1516705751.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:12.108Z,1516705752.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.109Z,1516705752.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.123Z,1516705752.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:12.500Z,1516705752.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.500Z,1516705752.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.533Z,1516705752.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:12.905Z,1516705752.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.906Z,1516705752.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:12.924Z,1516705752.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:13.305Z,1516705753.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:13.306Z,1516705753.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:13.321Z,1516705753.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:13.704Z,1516705753.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:13.705Z,1516705753.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:13.731Z,1516705753.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:14.120Z,1516705754.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.121Z,1516705754.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.135Z,1516705754.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:14.512Z,1516705754.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.513Z,1516705754.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.539Z,1516705754.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:14.919Z,1516705754.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.920Z,1516705754.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:14.934Z,1516705754.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:15.296Z,1516705755.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:15.297Z,1516705755.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:15.330Z,1516705755.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:15.700Z,1516705755.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:15.702Z,1516705755.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:15.733Z,1516705755.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:16.097Z,1516705756.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.098Z,1516705756.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.129Z,1516705756.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:16.500Z,1516705756.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.501Z,1516705756.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.528Z,1516705756.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:16.919Z,1516705756.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.920Z,1516705756.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:16.935Z,1516705756.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:17.318Z,1516705757.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:17.319Z,1516705757.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:17.342Z,1516705757.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:17.707Z,1516705757.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:17.708Z,1516705757.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:17.735Z,1516705757.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:18.094Z,1516705758.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.095Z,1516705758.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.110Z,1516705758.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:18.496Z,1516705758.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.497Z,1516705758.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.517Z,1516705758.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:18.904Z,1516705758.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.905Z,1516705758.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:18.919Z,1516705758.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:19.305Z,1516705759.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:19.306Z,1516705759.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:19.321Z,1516705759.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:19.703Z,1516705759.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:19.704Z,1516705759.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:19.725Z,1516705759.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:20.119Z,1516705760.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.120Z,1516705760.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.153Z,1516705760.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:20.507Z,1516705760.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.508Z,1516705760.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.522Z,1516705760.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:20.911Z,1516705760.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.912Z,1516705760.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:20.926Z,1516705760.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:21.305Z,1516705761.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:21.306Z,1516705761.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:21.320Z,1516705761.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:21.704Z,1516705761.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:21.705Z,1516705761.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:21.719Z,1516705761.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:22.106Z,1516705762.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.107Z,1516705762.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.121Z,1516705762.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:22.502Z,1516705762.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.503Z,1516705762.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.529Z,1516705762.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:22.919Z,1516705762.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.920Z,1516705762.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:22.955Z,1516705762.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:23.311Z,1516705763.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:23.312Z,1516705763.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:23.327Z,1516705763.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:23.710Z,1516705763.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:23.711Z,1516705763.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:23.732Z,1516705763.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:24.108Z,1516705764.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.109Z,1516705764.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.129Z,1516705764.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:24.508Z,1516705764.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.509Z,1516705764.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.524Z,1516705764.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:24.905Z,1516705764.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.906Z,1516705764.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:24.920Z,1516705764.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:25.304Z,1516705765.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:25.305Z,1516705765.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:25.327Z,1516705765.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:25.704Z,1516705765.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:25.705Z,1516705765.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:25.719Z,1516705765.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:26.114Z,1516705766.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.115Z,1516705766.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.129Z,1516705766.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:26.514Z,1516705766.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.515Z,1516705766.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.537Z,1516705766.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:26.918Z,1516705766.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.919Z,1516705766.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:26.933Z,1516705766.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:27.305Z,1516705767.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:27.320Z,1516705767.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:27.700Z,1516705767.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:27.723Z,1516705767.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:28.099Z,1516705768.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:28.132Z,1516705768.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:28.505Z,1516705768.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:28.520Z,1516705768.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:28.915Z,1516705768.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:28.930Z,1516705768.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:29.318Z,1516705769.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:29.337Z,1516705769.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:29.716Z,1516705769.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:29.730Z,1516705769.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:30.100Z,1516705770.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:30.122Z,1516705770.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:30.500Z,1516705770.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:30.522Z,1516705770.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:30.911Z,1516705770.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:30.925Z,1516705770.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:31.304Z,1516705771.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:31.324Z,1516705771.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:31.699Z,1516705771.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:31.731Z,1516705771.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:32.131Z,1516705772.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:32.146Z,1516705772.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:32.514Z,1516705772.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:32.529Z,1516705772.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:32.914Z,1516705772.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:32.929Z,1516705772.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:33.303Z,1516705773.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:33.327Z,1516705773.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:33.708Z,1516705773.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:33.723Z,1516705773.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:34.101Z,1516705774.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:34.123Z,1516705774.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:34.504Z,1516705774.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:34.524Z,1516705774.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:34.918Z,1516705774.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:34.933Z,1516705774.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:35.318Z,1516705775.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:35.333Z,1516705775.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:35.716Z,1516705775.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:35.730Z,1516705775.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:36.104Z,1516705776.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:36.124Z,1516705776.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:36.499Z,1516705776.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:36.531Z,1516705776.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:36.916Z,1516705776.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:36.930Z,1516705776.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:37.314Z,1516705777.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:37.330Z,1516705777.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:37.715Z,1516705777.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:37.730Z,1516705777.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:38.106Z,1516705778.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:38.121Z,1516705778.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:38.494Z,1516705778.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:38.525Z,1516705778.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:38.916Z,1516705778.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:38.931Z,1516705778.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:39.320Z,1516705779.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:39.334Z,1516705779.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:42.412Z,1516705782.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:42.433Z,1516705782.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:42.544Z,1516705782.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:42.576Z,1516705782.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:42.890Z,1516705782.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:42.929Z,1516705782.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:43.291Z,1516705783.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:43.330Z,1516705783.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:43.680Z,1516705783.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:43.696Z,1516705783.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:44.100Z,1516705784.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:44.125Z,1516705784.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:44.500Z,1516705784.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:44.527Z,1516705784.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:44.896Z,1516705784.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:44.927Z,1516705784.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:45.288Z,1516705785.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:45.331Z,1516705785.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:45.688Z,1516705785.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:45.704Z,1516705785.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:46.089Z,1516705786.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:46.105Z,1516705786.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:46.483Z,1516705786.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:46.498Z,1516705786.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:46.895Z,1516705786.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:46.910Z,1516705786.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:47.299Z,1516705787.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:47.314Z,1516705787.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:47.703Z,1516705787.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:47.718Z,1516705787.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:48.086Z,1516705788.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:48.100Z,1516705788.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:48.480Z,1516705788.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:48.503Z,1516705788.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:48.894Z,1516705788.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:48.913Z,1516705788.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:49.299Z,1516705789.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:49.314Z,1516705789.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:49.694Z,1516705789.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:49.709Z,1516705789.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:50.085Z,1516705790.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:50.112Z,1516705790.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:50.491Z,1516705790.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:50.506Z,1516705790.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:50.898Z,1516705790.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:50.913Z,1516705790.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:51.299Z,1516705791.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:51.314Z,1516705791.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:51.700Z,1516705791.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:51.715Z,1516705791.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:52.087Z,1516705792.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:52.102Z,1516705792.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:52.496Z,1516705792.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:52.511Z,1516705792.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:52.899Z,1516705792.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:52.914Z,1516705792.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:53.292Z,1516705793.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:53.315Z,1516705793.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:53.691Z,1516705793.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:53.713Z,1516705793.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:54.081Z,1516705794.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:54.109Z,1516705794.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:54.478Z,1516705794.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:54.513Z,1516705794.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:54.893Z,1516705794.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:54.915Z,1516705794.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:55.300Z,1516705795.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:55.314Z,1516705795.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:55.699Z,1516705795.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:55.714Z,1516705795.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:56.097Z,1516705796.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:56.112Z,1516705796.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:56.477Z,1516705796.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:56.514Z,1516705796.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:56.897Z,1516705796.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:56.917Z,1516705796.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:57.298Z,1516705797.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:57.313Z,1516705797.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:57.718Z,1516705797.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:57.733Z,1516705797.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:58.082Z,1516705798.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:58.111Z,1516705798.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:58.486Z,1516705798.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:58.512Z,1516705798.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:58.891Z,1516705798.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:58.915Z,1516705798.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:59.296Z,1516705799.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:59.317Z,1516705799.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:09:59.695Z,1516705799.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:09:59.718Z,1516705799.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:00.083Z,1516705800.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:00.119Z,1516705800.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:00.476Z,1516705800.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:00.491Z,1516705800.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:00.907Z,1516705800.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:00.929Z,1516705800.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:01.297Z,1516705801.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:01.324Z,1516705801.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:01.693Z,1516705801.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:01.719Z,1516705801.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:02.078Z,1516705802.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:02.093Z,1516705802.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:02.483Z,1516705802.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:02.497Z,1516705802.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:02.890Z,1516705802.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:02.923Z,1516705802.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:03.293Z,1516705803.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:03.331Z,1516705803.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:03.699Z,1516705803.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:03.731Z,1516705803.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:04.099Z,1516705804.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:04.130Z,1516705804.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:04.481Z,1516705804.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:04.506Z,1516705804.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:04.885Z,1516705804.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:04.902Z,1516705804.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:05.284Z,1516705805.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:05.311Z,1516705805.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:05.683Z,1516705805.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:05.702Z,1516705805.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:06.096Z,1516705806.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:06.113Z,1516705806.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:06.494Z,1516705806.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:06.521Z,1516705806.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:06.898Z,1516705806.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:06.913Z,1516705806.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:07.287Z,1516705807.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:07.302Z,1516705807.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:07.680Z,1516705807.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:07.721Z,1516705807.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:08.090Z,1516705808.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:08.099Z,1516705808.099 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T11:10:08.125Z,1516705808.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:08.493Z,1516705808.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:08.508Z,1516705808.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:08.887Z,1516705808.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:08.907Z,1516705808.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:09.292Z,1516705809.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:09.329Z,1516705809.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:09.700Z,1516705809.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:09.708Z,1516705809.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x28747 got:0x46187 2018-01-23T11:10:09.725Z,1516705809.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:10.103Z,1516705810.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:10.117Z,1516705810.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:10.487Z,1516705810.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:10.507Z,1516705810.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:10.877Z,1516705810.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:10.912Z,1516705810.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:11.289Z,1516705811.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:11.308Z,1516705811.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:11.676Z,1516705811.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:11.715Z,1516705811.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:12.101Z,1516705812.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:12.116Z,1516705812.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:12.492Z,1516705812.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:12.529Z,1516705812.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:12.896Z,1516705812.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:12.906Z,1516705812.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T11:10:12.949Z,1516705812.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:13.277Z,1516705813.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:13.313Z,1516705813.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:13.678Z,1516705813.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:13.718Z,1516705813.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:14.076Z,1516705814.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:14.118Z,1516705814.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:14.490Z,1516705814.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:14.508Z,1516705814.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:14.876Z,1516705814.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:14.909Z,1516705814.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:15.292Z,1516705815.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:15.319Z,1516705815.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:15.700Z,1516705815.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:15.732Z,1516705815.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:16.102Z,1516705816.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:16.111Z,1516705816.111 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T11:10:16.154Z,1516705816.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:16.496Z,1516705816.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:16.512Z,1516705816.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:16.877Z,1516705816.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:16.917Z,1516705816.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:17.282Z,1516705817.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:17.329Z,1516705817.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:17.677Z,1516705817.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:17.706Z,1516705817.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:18.107Z,1516705818.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:18.128Z,1516705818.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:18.497Z,1516705818.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:18.519Z,1516705818.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:18.901Z,1516705818.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:18.933Z,1516705818.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:19.277Z,1516705819.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:19.309Z,1516705819.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:19.677Z,1516705819.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:19.710Z,1516705819.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:20.077Z,1516705820.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:20.117Z,1516705820.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:20.482Z,1516705820.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:20.511Z,1516705820.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:20.877Z,1516705820.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:20.925Z,1516705820.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:21.309Z,1516705821.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:21.324Z,1516705821.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:21.704Z,1516705821.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:21.724Z,1516705821.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:22.088Z,1516705822.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:22.132Z,1516705822.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:22.481Z,1516705822.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:22.518Z,1516705822.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:22.877Z,1516705822.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:22.928Z,1516705822.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:23.277Z,1516705823.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:23.311Z,1516705823.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:23.676Z,1516705823.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:23.693Z,1516705823.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:24.087Z,1516705824.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:24.127Z,1516705824.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:24.487Z,1516705824.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:24.524Z,1516705824.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:24.897Z,1516705824.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:24.925Z,1516705824.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:25.288Z,1516705825.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:25.320Z,1516705825.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:25.684Z,1516705825.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:25.725Z,1516705825.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:26.088Z,1516705826.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:26.130Z,1516705826.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:26.481Z,1516705826.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:26.516Z,1516705826.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:26.882Z,1516705826.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:26.905Z,1516705826.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:27.287Z,1516705827.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:27.302Z,1516705827.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:27.699Z,1516705827.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:27.738Z,1516705827.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:28.101Z,1516705828.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:28.134Z,1516705828.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:28.488Z,1516705828.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:28.537Z,1516705828.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:28.885Z,1516705828.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:28.900Z,1516705828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:29.281Z,1516705829.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:29.309Z,1516705829.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:29.684Z,1516705829.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:29.700Z,1516705829.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:30.094Z,1516705830.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:30.113Z,1516705830.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:30.494Z,1516705830.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:30.509Z,1516705830.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:30.894Z,1516705830.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:30.909Z,1516705830.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:31.286Z,1516705831.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:31.312Z,1516705831.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:31.688Z,1516705831.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:31.709Z,1516705831.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:32.080Z,1516705832.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:32.102Z,1516705832.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:32.490Z,1516705832.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:32.504Z,1516705832.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:32.888Z,1516705832.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:32.903Z,1516705832.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:33.294Z,1516705833.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:33.309Z,1516705833.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:33.698Z,1516705833.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:33.720Z,1516705833.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:34.098Z,1516705834.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:34.113Z,1516705834.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:34.483Z,1516705834.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:34.504Z,1516705834.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:34.885Z,1516705834.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:34.904Z,1516705834.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:35.289Z,1516705835.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:35.304Z,1516705835.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:35.684Z,1516705835.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:35.710Z,1516705835.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:36.097Z,1516705836.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:36.114Z,1516705836.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:36.495Z,1516705836.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:36.510Z,1516705836.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:36.891Z,1516705836.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:36.914Z,1516705836.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:37.277Z,1516705837.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:37.314Z,1516705837.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:37.676Z,1516705837.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:37.711Z,1516705837.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:38.080Z,1516705838.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:38.112Z,1516705838.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:38.477Z,1516705838.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:38.514Z,1516705838.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:38.876Z,1516705838.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:38.913Z,1516705838.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:39.287Z,1516705839.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:39.326Z,1516705839.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:39.700Z,1516705839.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:39.720Z,1516705839.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:42.796Z,1516705842.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:42.812Z,1516705842.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:42.913Z,1516705842.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:42.964Z,1516705842.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:43.257Z,1516705843.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:43.284Z,1516705843.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:43.665Z,1516705843.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:43.708Z,1516705843.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:44.070Z,1516705844.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:44.093Z,1516705844.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:44.474Z,1516705844.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:44.489Z,1516705844.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:44.871Z,1516705844.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:44.886Z,1516705844.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:45.250Z,1516705845.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:45.278Z,1516705845.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:45.665Z,1516705845.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:45.680Z,1516705845.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:46.052Z,1516705846.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:46.088Z,1516705846.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:46.451Z,1516705846.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:46.484Z,1516705846.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:46.854Z,1516705846.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:46.869Z,1516705846.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:47.264Z,1516705847.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:47.289Z,1516705847.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:47.670Z,1516705847.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:47.693Z,1516705847.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:48.070Z,1516705848.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:48.093Z,1516705848.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:48.465Z,1516705848.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:48.480Z,1516705848.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:48.864Z,1516705848.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:48.885Z,1516705848.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:49.260Z,1516705849.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:49.278Z,1516705849.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:49.661Z,1516705849.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:49.676Z,1516705849.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:50.070Z,1516705850.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:50.085Z,1516705850.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:50.470Z,1516705850.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:50.489Z,1516705850.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:50.871Z,1516705850.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:50.886Z,1516705850.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:51.256Z,1516705851.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:51.278Z,1516705851.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:51.657Z,1516705851.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:51.679Z,1516705851.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:52.061Z,1516705852.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:52.076Z,1516705852.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:52.461Z,1516705852.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:52.481Z,1516705852.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:52.854Z,1516705852.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:52.887Z,1516705852.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:53.271Z,1516705853.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:53.286Z,1516705853.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:53.668Z,1516705853.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:53.695Z,1516705853.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:54.071Z,1516705854.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:54.086Z,1516705854.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:54.463Z,1516705854.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:54.478Z,1516705854.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:54.856Z,1516705854.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:54.883Z,1516705854.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:55.253Z,1516705855.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:55.286Z,1516705855.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:55.653Z,1516705855.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:55.690Z,1516705855.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:56.076Z,1516705856.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:56.092Z,1516705856.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:56.480Z,1516705856.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:56.501Z,1516705856.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:56.873Z,1516705856.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:56.888Z,1516705856.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:57.254Z,1516705857.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:57.282Z,1516705857.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:57.654Z,1516705857.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:57.694Z,1516705857.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:58.053Z,1516705858.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:58.088Z,1516705858.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:58.458Z,1516705858.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:58.486Z,1516705858.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:58.852Z,1516705858.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:58.888Z,1516705858.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:59.264Z,1516705859.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:59.300Z,1516705859.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:10:59.664Z,1516705859.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:10:59.702Z,1516705859.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:00.063Z,1516705860.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:00.096Z,1516705860.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:00.452Z,1516705860.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:00.499Z,1516705860.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:00.857Z,1516705860.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:00.895Z,1516705860.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:01.253Z,1516705861.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:01.268Z,1516705861.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:01.653Z,1516705861.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:01.672Z,1516705861.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:02.071Z,1516705862.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:02.097Z,1516705862.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:02.486Z,1516705862.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:02.502Z,1516705862.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:02.875Z,1516705862.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:02.901Z,1516705862.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:03.253Z,1516705863.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:03.273Z,1516705863.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:03.666Z,1516705863.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:03.701Z,1516705863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:04.061Z,1516705864.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:04.076Z,1516705864.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:04.462Z,1516705864.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:04.477Z,1516705864.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:04.858Z,1516705864.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:04.881Z,1516705864.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:05.267Z,1516705865.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:05.282Z,1516705865.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:05.666Z,1516705865.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:05.685Z,1516705865.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:06.066Z,1516705866.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:06.081Z,1516705866.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:06.461Z,1516705866.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:06.476Z,1516705866.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:06.860Z,1516705866.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:06.875Z,1516705866.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:07.261Z,1516705867.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:07.281Z,1516705867.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:07.662Z,1516705867.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:07.681Z,1516705867.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:08.066Z,1516705868.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:08.089Z,1516705868.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:08.467Z,1516705868.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:08.482Z,1516705868.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:08.866Z,1516705868.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:08.881Z,1516705868.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:09.256Z,1516705869.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:09.276Z,1516705869.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:09.664Z,1516705869.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:09.687Z,1516705869.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:10.061Z,1516705870.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:10.076Z,1516705870.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:10.457Z,1516705870.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:10.479Z,1516705870.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:10.860Z,1516705870.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:10.875Z,1516705870.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:11.267Z,1516705871.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:11.288Z,1516705871.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:11.666Z,1516705871.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:11.685Z,1516705871.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:12.068Z,1516705872.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:12.082Z,1516705872.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:12.461Z,1516705872.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:12.475Z,1516705872.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:12.860Z,1516705872.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:12.875Z,1516705872.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:13.256Z,1516705873.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:13.289Z,1516705873.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:13.289Z,1516705873.289 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158 2018-01-23T11:11:13.289Z,1516705873.289 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:11:13.295Z,1516705873.295 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:13.295Z,1516705873.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 158 2018-01-23T11:11:13.295Z,1516705873.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:11:13.297Z,1516705873.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:13.297Z,1516705873.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158 2018-01-23T11:11:13.297Z,1516705873.297 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:11:13.326Z,1516705873.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:11:13.326Z,1516705873.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:11:13.326Z,1516705873.326 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:11:13.656Z,1516705873.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:13.713Z,1516705873.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:11:13.713Z,1516705873.713 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158 2018-01-23T11:11:13.713Z,1516705873.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:11:13.714Z,1516705873.714 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 158 2018-01-23T11:11:13.714Z,1516705873.714 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:11:13.714Z,1516705873.714 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158 2018-01-23T11:11:14.071Z,1516705874.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:14.085Z,1516705874.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:11:14.085Z,1516705874.085 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:11:14.085Z,1516705874.085 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:11:14.086Z,1516705874.086 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:11:14.086Z,1516705874.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:11:14.087Z,1516705874.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:11:14.087Z,1516705874.087 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:11:14.088Z,1516705874.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:11:14.088Z,1516705874.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:11:14.472Z,1516705874.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:14.494Z,1516705874.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:11:14.499Z,1516705874.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:14.875Z,1516705874.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:14.896Z,1516705874.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:11:14.897Z,1516705874.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:15.250Z,1516705875.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:15.273Z,1516705875.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:11:15.274Z,1516705875.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:15.669Z,1516705875.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:15.688Z,1516705875.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:11:15.689Z,1516705875.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:16.053Z,1516705876.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:16.090Z,1516705876.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:11:16.091Z,1516705876.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:16.453Z,1516705876.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:16.515Z,1516705876.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:11:16.516Z,1516705876.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:16.856Z,1516705876.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:16.888Z,1516705876.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:11:16.889Z,1516705876.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:17.272Z,1516705877.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:17.291Z,1516705877.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:11:17.292Z,1516705877.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:17.671Z,1516705877.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:17.686Z,1516705877.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:11:17.687Z,1516705877.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:18.071Z,1516705878.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:18.086Z,1516705878.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:11:18.087Z,1516705878.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:18.453Z,1516705878.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:18.488Z,1516705878.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:11:18.489Z,1516705878.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:18.852Z,1516705878.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:18.888Z,1516705878.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:11:18.889Z,1516705878.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:19.253Z,1516705879.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:19.280Z,1516705879.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:11:19.281Z,1516705879.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:19.657Z,1516705879.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:19.694Z,1516705879.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:11:19.695Z,1516705879.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:20.067Z,1516705880.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:20.093Z,1516705880.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:11:20.094Z,1516705880.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:20.467Z,1516705880.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:20.500Z,1516705880.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:11:20.501Z,1516705880.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:20.863Z,1516705880.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:20.891Z,1516705880.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:11:20.892Z,1516705880.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:21.253Z,1516705881.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:21.268Z,1516705881.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:11:21.269Z,1516705881.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:21.653Z,1516705881.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:21.668Z,1516705881.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:11:21.669Z,1516705881.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:22.079Z,1516705882.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:22.108Z,1516705882.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:11:22.109Z,1516705882.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:22.475Z,1516705882.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:22.506Z,1516705882.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:11:22.507Z,1516705882.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:22.863Z,1516705882.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:22.878Z,1516705882.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:11:22.879Z,1516705882.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:23.260Z,1516705883.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:23.283Z,1516705883.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:11:23.284Z,1516705883.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:23.661Z,1516705883.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:23.680Z,1516705883.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:11:23.681Z,1516705883.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:24.079Z,1516705884.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:24.108Z,1516705884.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:11:24.109Z,1516705884.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:24.467Z,1516705884.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:24.482Z,1516705884.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:11:24.483Z,1516705884.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:24.865Z,1516705884.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:24.884Z,1516705884.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:11:24.885Z,1516705884.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:25.261Z,1516705885.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:25.276Z,1516705885.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:11:25.277Z,1516705885.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:25.662Z,1516705885.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:25.684Z,1516705885.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:11:25.685Z,1516705885.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:26.068Z,1516705886.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:26.082Z,1516705886.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:11:26.084Z,1516705886.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:26.467Z,1516705886.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:26.482Z,1516705886.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:11:26.483Z,1516705886.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:26.866Z,1516705886.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:26.881Z,1516705886.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:11:26.882Z,1516705886.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:27.260Z,1516705887.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:27.278Z,1516705887.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:11:27.279Z,1516705887.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:27.658Z,1516705887.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:27.685Z,1516705887.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:11:27.686Z,1516705887.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:28.071Z,1516705888.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:28.086Z,1516705888.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:11:28.087Z,1516705888.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:28.470Z,1516705888.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:28.496Z,1516705888.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:11:28.497Z,1516705888.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:28.875Z,1516705888.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:28.890Z,1516705888.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:11:28.891Z,1516705888.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:29.260Z,1516705889.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:29.281Z,1516705889.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:11:29.282Z,1516705889.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:29.656Z,1516705889.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:29.688Z,1516705889.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:11:29.689Z,1516705889.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:30.072Z,1516705890.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:30.086Z,1516705890.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:11:30.087Z,1516705890.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:30.475Z,1516705890.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:30.496Z,1516705890.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:11:30.497Z,1516705890.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:30.875Z,1516705890.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:30.890Z,1516705890.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:11:30.891Z,1516705890.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:31.254Z,1516705891.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:31.296Z,1516705891.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:11:31.297Z,1516705891.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:31.657Z,1516705891.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:31.685Z,1516705891.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:11:31.686Z,1516705891.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:32.068Z,1516705892.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:32.089Z,1516705892.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:11:32.090Z,1516705892.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:32.472Z,1516705892.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:32.494Z,1516705892.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:11:32.495Z,1516705892.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:32.872Z,1516705892.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:32.892Z,1516705892.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:11:32.893Z,1516705892.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:33.253Z,1516705893.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:33.285Z,1516705893.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:11:33.286Z,1516705893.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:33.660Z,1516705893.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:33.697Z,1516705893.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:34.078Z,1516705894.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:34.094Z,1516705894.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:34.477Z,1516705894.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:34.492Z,1516705894.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:34.864Z,1516705894.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:34.899Z,1516705894.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:35.253Z,1516705895.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:35.268Z,1516705895.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:35.659Z,1516705895.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:35.701Z,1516705895.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:36.075Z,1516705896.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:36.109Z,1516705896.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:36.471Z,1516705896.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:36.497Z,1516705896.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:36.864Z,1516705896.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:36.896Z,1516705896.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:37.263Z,1516705897.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:37.278Z,1516705897.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:37.661Z,1516705897.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:37.676Z,1516705897.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:38.069Z,1516705898.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:38.084Z,1516705898.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:38.469Z,1516705898.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:38.484Z,1516705898.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:38.486Z,1516705898.486 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:11:38.487Z,1516705898.487 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:11:38.487Z,1516705898.487 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:11:38.487Z,1516705898.487 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:11:38.867Z,1516705898.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:38.888Z,1516705898.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:38.892Z,1516705898.892 [Default:CheckIn:D] Stopped 2018-01-23T11:11:38.892Z,1516705898.892 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:11:39.265Z,1516705899.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:39.282Z,1516705899.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:39.285Z,1516705899.285 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 473.780534 min 2018-01-23T11:11:39.285Z,1516705899.285 [Default:CheckIn:E] Stopped 2018-01-23T11:11:39.285Z,1516705899.285 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:11:39.285Z,1516705899.285 [Default:CheckIn] Stopped 2018-01-23T11:11:39.286Z,1516705899.286 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:11:39.286Z,1516705899.286 [Default:CheckIn](INFO): Running loop #47 2018-01-23T11:11:39.286Z,1516705899.286 [Default:CheckIn] Running Loop=47 2018-01-23T11:11:39.286Z,1516705899.286 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:11:39.286Z,1516705899.286 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:11:39.660Z,1516705899.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:39.689Z,1516705899.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:40.072Z,1516705900.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:40.088Z,1516705900.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:43.168Z,1516705903.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:43.183Z,1516705903.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:43.308Z,1516705903.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:43.353Z,1516705903.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:43.633Z,1516705903.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:43.649Z,1516705903.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:44.037Z,1516705904.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:44.052Z,1516705904.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:44.434Z,1516705904.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:44.449Z,1516705904.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:44.830Z,1516705904.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:44.849Z,1516705904.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:45.239Z,1516705905.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:45.254Z,1516705905.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:45.637Z,1516705905.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:45.657Z,1516705905.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:46.037Z,1516705906.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:46.057Z,1516705906.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:46.433Z,1516705906.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:46.448Z,1516705906.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:46.832Z,1516705906.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:46.847Z,1516705906.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:47.228Z,1516705907.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:47.257Z,1516705907.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:47.634Z,1516705907.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:47.649Z,1516705907.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:48.032Z,1516705908.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:48.047Z,1516705908.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:48.437Z,1516705908.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:48.457Z,1516705908.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:48.839Z,1516705908.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:48.854Z,1516705908.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:49.237Z,1516705909.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:49.257Z,1516705909.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:49.636Z,1516705909.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:49.652Z,1516705909.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:50.033Z,1516705910.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:50.052Z,1516705910.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:50.432Z,1516705910.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:50.451Z,1516705910.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:50.832Z,1516705910.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:50.847Z,1516705910.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:51.238Z,1516705911.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:51.260Z,1516705911.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:51.640Z,1516705911.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:51.655Z,1516705911.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:52.036Z,1516705912.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:52.059Z,1516705912.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:52.432Z,1516705912.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:52.453Z,1516705912.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:52.825Z,1516705912.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:52.857Z,1516705912.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:53.232Z,1516705913.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:53.247Z,1516705913.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:53.629Z,1516705913.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:53.657Z,1516705913.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:54.024Z,1516705914.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:54.056Z,1516705914.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:54.435Z,1516705914.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:54.462Z,1516705914.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:54.843Z,1516705914.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:54.876Z,1516705914.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:55.235Z,1516705915.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:55.269Z,1516705915.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:55.624Z,1516705915.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:55.657Z,1516705915.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:56.025Z,1516705916.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:56.052Z,1516705916.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:56.425Z,1516705916.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:56.440Z,1516705916.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:56.828Z,1516705916.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:56.865Z,1516705916.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:57.243Z,1516705917.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:57.269Z,1516705917.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:57.643Z,1516705917.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:57.665Z,1516705917.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:58.047Z,1516705918.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:58.077Z,1516705918.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:58.437Z,1516705918.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:58.472Z,1516705918.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:58.829Z,1516705918.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:58.844Z,1516705918.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:59.232Z,1516705919.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:59.269Z,1516705919.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:11:59.633Z,1516705919.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:11:59.649Z,1516705919.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:00.031Z,1516705920.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:00.046Z,1516705920.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:00.435Z,1516705920.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:00.450Z,1516705920.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:00.839Z,1516705920.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:00.854Z,1516705920.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:01.235Z,1516705921.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:01.250Z,1516705921.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:01.632Z,1516705921.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:01.647Z,1516705921.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:02.032Z,1516705922.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:02.049Z,1516705922.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:02.432Z,1516705922.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:02.447Z,1516705922.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:02.830Z,1516705922.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:02.853Z,1516705922.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:03.240Z,1516705923.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:03.255Z,1516705923.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:03.640Z,1516705923.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:03.655Z,1516705923.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:04.039Z,1516705924.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:04.054Z,1516705924.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:04.434Z,1516705924.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:04.449Z,1516705924.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:04.833Z,1516705924.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:04.848Z,1516705924.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:05.231Z,1516705925.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:05.251Z,1516705925.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:05.632Z,1516705925.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:05.665Z,1516705925.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:06.037Z,1516705926.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:06.052Z,1516705926.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:06.444Z,1516705926.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:06.459Z,1516705926.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:06.843Z,1516705926.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:06.864Z,1516705926.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:07.244Z,1516705927.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:07.258Z,1516705927.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:07.635Z,1516705927.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:07.650Z,1516705927.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:08.032Z,1516705928.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:08.059Z,1516705928.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:08.432Z,1516705928.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:08.452Z,1516705928.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:08.832Z,1516705928.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:08.861Z,1516705928.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:09.249Z,1516705929.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:09.264Z,1516705929.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:09.648Z,1516705929.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:09.663Z,1516705929.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:10.044Z,1516705930.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:10.065Z,1516705930.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:10.437Z,1516705930.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:10.453Z,1516705930.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:10.825Z,1516705930.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:10.852Z,1516705930.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:11.224Z,1516705931.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:11.257Z,1516705931.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:11.625Z,1516705931.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:11.666Z,1516705931.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:12.028Z,1516705932.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:12.061Z,1516705932.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:12.448Z,1516705932.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:12.466Z,1516705932.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:12.849Z,1516705932.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:12.864Z,1516705932.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:13.235Z,1516705933.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:13.271Z,1516705933.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:13.626Z,1516705933.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:13.661Z,1516705933.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:14.025Z,1516705934.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:14.062Z,1516705934.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:14.431Z,1516705934.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:14.459Z,1516705934.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:14.824Z,1516705934.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:14.866Z,1516705934.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:15.236Z,1516705935.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:15.278Z,1516705935.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:15.654Z,1516705935.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:15.669Z,1516705935.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:16.035Z,1516705936.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:16.073Z,1516705936.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:16.428Z,1516705936.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:16.471Z,1516705936.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:16.828Z,1516705936.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:16.866Z,1516705936.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:17.224Z,1516705937.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:17.262Z,1516705937.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:17.625Z,1516705937.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:17.661Z,1516705937.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:18.028Z,1516705938.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:18.050Z,1516705938.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:18.442Z,1516705938.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:18.457Z,1516705938.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:18.846Z,1516705938.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:18.861Z,1516705938.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:19.243Z,1516705939.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:19.258Z,1516705939.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:19.628Z,1516705939.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:19.650Z,1516705939.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:20.039Z,1516705940.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:20.053Z,1516705940.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:20.429Z,1516705940.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:20.451Z,1516705940.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:20.827Z,1516705940.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:20.858Z,1516705940.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:21.244Z,1516705941.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:21.259Z,1516705941.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:21.646Z,1516705941.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:21.661Z,1516705941.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:22.042Z,1516705942.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:22.057Z,1516705942.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:22.434Z,1516705942.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:22.456Z,1516705942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:22.832Z,1516705942.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:22.850Z,1516705942.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:23.228Z,1516705943.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:23.250Z,1516705943.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:23.634Z,1516705943.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:23.656Z,1516705943.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:24.028Z,1516705944.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:24.050Z,1516705944.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:24.442Z,1516705944.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:24.457Z,1516705944.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:24.846Z,1516705944.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:24.868Z,1516705944.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:25.246Z,1516705945.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:25.261Z,1516705945.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:25.631Z,1516705945.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:25.651Z,1516705945.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:26.033Z,1516705946.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:26.052Z,1516705946.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:26.437Z,1516705946.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:26.452Z,1516705946.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:26.827Z,1516705946.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:26.859Z,1516705946.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:27.244Z,1516705947.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:27.259Z,1516705947.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:27.647Z,1516705947.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:27.662Z,1516705947.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:28.043Z,1516705948.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:28.057Z,1516705948.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:28.434Z,1516705948.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:28.456Z,1516705948.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:28.836Z,1516705948.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:28.851Z,1516705948.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:29.228Z,1516705949.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:29.250Z,1516705949.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:29.645Z,1516705949.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:29.660Z,1516705949.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:30.033Z,1516705950.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:30.053Z,1516705950.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:30.442Z,1516705950.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:30.457Z,1516705950.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:30.846Z,1516705950.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:30.861Z,1516705950.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:31.243Z,1516705951.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:31.258Z,1516705951.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:31.628Z,1516705951.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:31.650Z,1516705951.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:32.034Z,1516705952.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:32.057Z,1516705952.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:32.432Z,1516705952.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:32.451Z,1516705952.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:32.828Z,1516705952.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:32.850Z,1516705952.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:33.243Z,1516705953.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:33.258Z,1516705953.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:33.646Z,1516705953.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:33.669Z,1516705953.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:34.042Z,1516705954.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:34.057Z,1516705954.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:34.434Z,1516705954.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:34.456Z,1516705954.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:34.828Z,1516705954.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:34.861Z,1516705954.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:35.228Z,1516705955.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:35.254Z,1516705955.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:35.625Z,1516705955.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:35.653Z,1516705955.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:36.024Z,1516705956.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:36.050Z,1516705956.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:36.442Z,1516705956.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:36.465Z,1516705956.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:36.852Z,1516705956.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:36.866Z,1516705956.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:37.247Z,1516705957.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:37.262Z,1516705957.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:37.624Z,1516705957.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:37.650Z,1516705957.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:38.024Z,1516705958.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:38.053Z,1516705958.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:38.429Z,1516705958.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:38.455Z,1516705958.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:38.825Z,1516705958.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:38.857Z,1516705958.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:39.244Z,1516705959.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:39.259Z,1516705959.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:39.648Z,1516705959.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:39.662Z,1516705959.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:40.043Z,1516705960.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:40.058Z,1516705960.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:40.425Z,1516705960.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:40.453Z,1516705960.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:43.524Z,1516705963.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:43.552Z,1516705963.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:43.661Z,1516705963.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:43.704Z,1516705963.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:44.004Z,1516705964.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:44.019Z,1516705964.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:44.416Z,1516705964.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:44.439Z,1516705964.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:44.806Z,1516705964.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:44.821Z,1516705964.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:45.197Z,1516705965.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:45.218Z,1516705965.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:45.603Z,1516705965.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:45.618Z,1516705965.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:46.001Z,1516705966.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:46.016Z,1516705966.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:46.408Z,1516705966.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:46.423Z,1516705966.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:46.807Z,1516705966.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:46.822Z,1516705966.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:47.204Z,1516705967.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:47.231Z,1516705967.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:47.606Z,1516705967.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:47.620Z,1516705967.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:47.000Z,1516705968.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:48.027Z,1516705968.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:48.405Z,1516705968.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:48.424Z,1516705968.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:48.809Z,1516705968.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:48.824Z,1516705968.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:49.212Z,1516705969.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:49.227Z,1516705969.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:49.611Z,1516705969.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:49.626Z,1516705969.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:50.011Z,1516705970.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:50.031Z,1516705970.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:50.403Z,1516705970.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:50.418Z,1516705970.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:50.805Z,1516705970.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:50.821Z,1516705970.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:51.212Z,1516705971.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:51.227Z,1516705971.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:51.611Z,1516705971.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:51.632Z,1516705971.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:52.011Z,1516705972.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:52.027Z,1516705972.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:52.400Z,1516705972.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:52.420Z,1516705972.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:52.800Z,1516705972.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:52.829Z,1516705972.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:53.214Z,1516705973.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:53.230Z,1516705973.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:53.613Z,1516705973.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:53.629Z,1516705973.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:54.010Z,1516705974.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:54.039Z,1516705974.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:54.405Z,1516705974.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:54.421Z,1516705974.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:54.791Z,1516705974.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:54.825Z,1516705974.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:55.212Z,1516705975.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:55.227Z,1516705975.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:55.615Z,1516705975.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:55.630Z,1516705975.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:56.008Z,1516705976.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:56.035Z,1516705976.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:56.395Z,1516705976.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:56.424Z,1516705976.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:56.793Z,1516705976.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:56.825Z,1516705976.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:57.207Z,1516705977.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:57.229Z,1516705977.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:57.620Z,1516705977.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:57.641Z,1516705977.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:58.011Z,1516705978.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:58.033Z,1516705978.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:58.393Z,1516705978.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:58.420Z,1516705978.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:58.792Z,1516705978.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:58.819Z,1516705978.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:59.207Z,1516705979.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:59.241Z,1516705979.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:12:59.607Z,1516705979.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:12:59.645Z,1516705979.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:00.010Z,1516705980.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:00.040Z,1516705980.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:00.401Z,1516705980.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:00.421Z,1516705980.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:00.804Z,1516705980.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:00.825Z,1516705980.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:01.203Z,1516705981.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:01.218Z,1516705981.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:01.615Z,1516705981.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:01.649Z,1516705981.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:02.003Z,1516705982.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:02.018Z,1516705982.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:02.406Z,1516705982.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:02.421Z,1516705982.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:02.806Z,1516705982.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:02.821Z,1516705982.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:03.203Z,1516705983.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:03.218Z,1516705983.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:03.607Z,1516705983.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:03.622Z,1516705983.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:04.020Z,1516705984.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:04.050Z,1516705984.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:04.402Z,1516705984.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:04.439Z,1516705984.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:04.801Z,1516705984.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:04.816Z,1516705984.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:05.215Z,1516705985.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:05.249Z,1516705985.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:05.615Z,1516705985.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:05.649Z,1516705985.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:06.011Z,1516705986.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:06.051Z,1516705986.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:06.403Z,1516705986.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:06.418Z,1516705986.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:06.798Z,1516705986.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:06.822Z,1516705986.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:07.211Z,1516705987.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:07.226Z,1516705987.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:07.620Z,1516705987.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:07.634Z,1516705987.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:08.010Z,1516705988.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:08.025Z,1516705988.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:08.402Z,1516705988.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:08.424Z,1516705988.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:08.807Z,1516705988.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:08.822Z,1516705988.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:09.224Z,1516705989.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:09.255Z,1516705989.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:09.614Z,1516705989.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:09.629Z,1516705989.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:10.011Z,1516705990.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:10.026Z,1516705990.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:10.402Z,1516705990.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:10.425Z,1516705990.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:10.809Z,1516705990.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:10.824Z,1516705990.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:11.218Z,1516705991.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:11.233Z,1516705991.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:11.615Z,1516705991.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:11.637Z,1516705991.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:12.020Z,1516705992.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:12.034Z,1516705992.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:12.409Z,1516705992.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:12.425Z,1516705992.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:12.812Z,1516705992.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:12.827Z,1516705992.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:13.210Z,1516705993.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:13.234Z,1516705993.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:13.618Z,1516705993.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:13.633Z,1516705993.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:14.012Z,1516705994.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:14.035Z,1516705994.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:14.401Z,1516705994.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:14.428Z,1516705994.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:14.800Z,1516705994.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:14.827Z,1516705994.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:15.209Z,1516705995.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:15.232Z,1516705995.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:15.615Z,1516705995.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:15.630Z,1516705995.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:16.023Z,1516705996.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:16.038Z,1516705996.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:16.401Z,1516705996.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:16.428Z,1516705996.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:16.794Z,1516705996.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:16.825Z,1516705996.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:17.208Z,1516705997.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:17.230Z,1516705997.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:17.619Z,1516705997.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:17.634Z,1516705997.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:18.015Z,1516705998.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:18.030Z,1516705998.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:18.395Z,1516705998.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:18.423Z,1516705998.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:18.793Z,1516705998.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:18.825Z,1516705998.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:19.214Z,1516705999.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:19.229Z,1516705999.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:19.617Z,1516705999.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:19.647Z,1516705999.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:20.021Z,1516706000.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:20.041Z,1516706000.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:20.396Z,1516706000.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:20.431Z,1516706000.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:20.793Z,1516706000.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:20.829Z,1516706000.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:21.227Z,1516706001.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:21.242Z,1516706001.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:21.620Z,1516706001.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:21.641Z,1516706001.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:22.006Z,1516706002.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:22.041Z,1516706002.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:22.396Z,1516706002.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:22.429Z,1516706002.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:22.800Z,1516706002.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:22.835Z,1516706002.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:23.205Z,1516706003.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:23.245Z,1516706003.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:23.622Z,1516706003.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:23.654Z,1516706003.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:24.024Z,1516706004.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:24.039Z,1516706004.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:24.400Z,1516706004.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:24.423Z,1516706004.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:24.807Z,1516706004.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:24.841Z,1516706004.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:25.199Z,1516706005.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:25.244Z,1516706005.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:25.608Z,1516706005.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:25.640Z,1516706005.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:26.015Z,1516706006.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:26.038Z,1516706006.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:26.412Z,1516706006.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:26.443Z,1516706006.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:26.792Z,1516706006.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:26.821Z,1516706006.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:27.202Z,1516706007.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:27.221Z,1516706007.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:27.605Z,1516706007.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:27.620Z,1516706007.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:28.000Z,1516706008.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:28.024Z,1516706008.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:28.409Z,1516706008.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:28.429Z,1516706008.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:28.815Z,1516706008.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:28.830Z,1516706008.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:29.209Z,1516706009.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:29.233Z,1516706009.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:29.605Z,1516706009.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:29.654Z,1516706009.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:30.000Z,1516706010.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:30.010Z,1516706010.010 [PNI_TCM](ERROR): CRC does not match. Expected:0x29369 got:0x40455 2018-01-23T11:13:30.033Z,1516706010.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:30.399Z,1516706010.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:30.421Z,1516706010.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:30.802Z,1516706010.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:30.825Z,1516706010.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:31.192Z,1516706011.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:31.225Z,1516706011.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:31.614Z,1516706011.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:31.630Z,1516706011.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:32.018Z,1516706012.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:32.033Z,1516706012.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:32.410Z,1516706012.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:32.441Z,1516706012.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:32.790Z,1516706012.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:32.830Z,1516706012.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:33.192Z,1516706013.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:33.229Z,1516706013.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:33.593Z,1516706013.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:33.624Z,1516706013.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:33.995Z,1516706013.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:34.010Z,1516706014.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:34.403Z,1516706014.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:34.440Z,1516706014.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:34.808Z,1516706014.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:34.845Z,1516706014.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:35.206Z,1516706015.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:35.245Z,1516706015.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:35.594Z,1516706015.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:35.610Z,1516706015.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:35.999Z,1516706015.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:36.038Z,1516706016.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:36.392Z,1516706016.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:36.418Z,1516706016.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:36.798Z,1516706016.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:36.821Z,1516706016.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:37.202Z,1516706017.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:37.217Z,1516706017.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:37.604Z,1516706017.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:37.644Z,1516706017.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:38.007Z,1516706018.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:38.026Z,1516706018.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:38.404Z,1516706018.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:38.429Z,1516706018.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:38.798Z,1516706018.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:38.814Z,1516706018.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:39.200Z,1516706019.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:39.244Z,1516706019.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:39.601Z,1516706019.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:39.624Z,1516706019.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:39.998Z,1516706019.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:40.017Z,1516706020.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:40.406Z,1516706020.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:40.421Z,1516706020.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:40.807Z,1516706020.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:40.845Z,1516706020.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:43.904Z,1516706023.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:43.919Z,1516706023.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:44.025Z,1516706024.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:44.061Z,1516706024.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:44.376Z,1516706024.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:44.409Z,1516706024.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:44.781Z,1516706024.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:44.809Z,1516706024.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:45.176Z,1516706025.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:45.215Z,1516706025.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:45.595Z,1516706025.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:45.610Z,1516706025.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:45.999Z,1516706025.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:46.014Z,1516706026.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:46.396Z,1516706026.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:46.434Z,1516706026.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:46.776Z,1516706026.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:46.814Z,1516706026.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:47.180Z,1516706027.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:47.195Z,1516706027.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:47.585Z,1516706027.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:47.600Z,1516706027.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:47.981Z,1516706027.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:48.001Z,1516706028.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:48.391Z,1516706028.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:48.406Z,1516706028.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:48.791Z,1516706028.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:48.806Z,1516706028.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:49.192Z,1516706029.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:49.206Z,1516706029.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:49.585Z,1516706029.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:49.600Z,1516706029.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:49.984Z,1516706029.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:49.999Z,1516706029.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:50.384Z,1516706030.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:50.399Z,1516706030.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:50.786Z,1516706030.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:50.801Z,1516706030.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:51.184Z,1516706031.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:51.199Z,1516706031.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:51.589Z,1516706031.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:51.609Z,1516706031.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:51.995Z,1516706031.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:52.010Z,1516706032.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:52.392Z,1516706032.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:52.406Z,1516706032.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:52.781Z,1516706032.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:52.808Z,1516706032.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:53.189Z,1516706033.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:53.204Z,1516706033.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:53.584Z,1516706033.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:53.603Z,1516706033.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:53.980Z,1516706033.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:53.998Z,1516706033.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:54.397Z,1516706034.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:54.411Z,1516706034.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:54.798Z,1516706034.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:54.843Z,1516706034.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:55.199Z,1516706035.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:55.214Z,1516706035.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:55.587Z,1516706035.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:55.602Z,1516706035.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:55.983Z,1516706035.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:56.003Z,1516706036.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:56.384Z,1516706036.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:56.411Z,1516706036.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:56.777Z,1516706036.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:56.811Z,1516706036.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:57.174Z,1516706037.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:57.214Z,1516706037.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:57.592Z,1516706037.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:57.622Z,1516706037.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:58.001Z,1516706038.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:58.015Z,1516706038.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:58.392Z,1516706038.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:58.414Z,1516706038.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:58.776Z,1516706038.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:58.809Z,1516706038.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:59.176Z,1516706039.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:59.216Z,1516706039.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:59.581Z,1516706039.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:13:59.609Z,1516706039.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:13:59.976Z,1516706039.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:00.009Z,1516706040.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:00.395Z,1516706040.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:00.417Z,1516706040.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:00.800Z,1516706040.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:00.815Z,1516706040.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:01.192Z,1516706041.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:01.223Z,1516706041.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:01.580Z,1516706041.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:01.609Z,1516706041.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:01.977Z,1516706041.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:02.003Z,1516706042.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:02.376Z,1516706042.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:02.409Z,1516706042.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:02.777Z,1516706042.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:02.817Z,1516706042.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:03.175Z,1516706043.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:03.213Z,1516706043.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:03.600Z,1516706043.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:03.615Z,1516706043.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:04.001Z,1516706044.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:04.015Z,1516706044.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:04.392Z,1516706044.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:04.423Z,1516706044.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:04.780Z,1516706044.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:04.813Z,1516706044.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:05.175Z,1516706045.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:05.217Z,1516706045.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:05.578Z,1516706045.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:05.614Z,1516706045.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:05.982Z,1516706045.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:05.997Z,1516706045.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:06.400Z,1516706046.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:06.426Z,1516706046.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:06.791Z,1516706046.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:06.820Z,1516706046.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:07.191Z,1516706047.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:07.206Z,1516706047.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:07.584Z,1516706047.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:07.604Z,1516706047.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:07.984Z,1516706047.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:07.999Z,1516706047.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:08.383Z,1516706048.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:08.399Z,1516706048.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:08.785Z,1516706048.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:08.800Z,1516706048.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:09.180Z,1516706049.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:09.200Z,1516706049.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:09.587Z,1516706049.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:09.603Z,1516706049.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:09.991Z,1516706049.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:10.006Z,1516706050.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:10.388Z,1516706050.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:10.402Z,1516706050.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:10.783Z,1516706050.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:10.798Z,1516706050.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:11.184Z,1516706051.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:11.204Z,1516706051.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:11.582Z,1516706051.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:11.601Z,1516706051.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:11.986Z,1516706051.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:12.001Z,1516706052.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:12.390Z,1516706052.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:12.405Z,1516706052.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:12.789Z,1516706052.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:12.809Z,1516706052.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:13.192Z,1516706053.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:13.206Z,1516706053.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:13.585Z,1516706053.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:13.600Z,1516706053.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:13.984Z,1516706053.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:13.999Z,1516706053.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:14.380Z,1516706054.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:14.409Z,1516706054.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:14.409Z,1516706054.409 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159 2018-01-23T11:14:14.409Z,1516706054.409 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:14:14.411Z,1516706054.411 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:14.411Z,1516706054.411 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 159 2018-01-23T11:14:14.411Z,1516706054.411 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:14:14.413Z,1516706054.413 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:14.413Z,1516706054.413 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159 2018-01-23T11:14:14.413Z,1516706054.413 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:14:14.437Z,1516706054.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:14:14.438Z,1516706054.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:14:14.438Z,1516706054.438 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:14:14.785Z,1516706054.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:14.814Z,1516706054.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:14:14.815Z,1516706054.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159 2018-01-23T11:14:14.815Z,1516706054.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:14:14.815Z,1516706054.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 159 2018-01-23T11:14:14.816Z,1516706054.816 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:14:14.816Z,1516706054.816 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159 2018-01-23T11:14:15.176Z,1516706055.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:15.207Z,1516706055.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:14:15.208Z,1516706055.208 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:14:15.208Z,1516706055.208 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:14:15.209Z,1516706055.209 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:14:15.209Z,1516706055.209 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:14:15.209Z,1516706055.209 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:14:15.210Z,1516706055.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:14:15.210Z,1516706055.210 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:14:15.210Z,1516706055.210 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:14:15.592Z,1516706055.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:15.614Z,1516706055.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:14:15.619Z,1516706055.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:16.004Z,1516706056.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:16.018Z,1516706056.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:14:16.019Z,1516706056.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:16.392Z,1516706056.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:16.413Z,1516706056.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:14:16.414Z,1516706056.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:16.775Z,1516706056.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:16.808Z,1516706056.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:14:16.809Z,1516706056.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:17.176Z,1516706057.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:17.210Z,1516706057.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:14:17.211Z,1516706057.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:17.577Z,1516706057.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:17.603Z,1516706057.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:14:17.604Z,1516706057.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:17.980Z,1516706057.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:18.012Z,1516706058.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:14:18.013Z,1516706058.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:18.397Z,1516706058.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:18.411Z,1516706058.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:14:18.412Z,1516706058.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:18.797Z,1516706058.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:18.817Z,1516706058.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:14:18.818Z,1516706058.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:19.191Z,1516706059.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:19.213Z,1516706059.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:14:19.214Z,1516706059.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:19.576Z,1516706059.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:19.609Z,1516706059.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:14:19.610Z,1516706059.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:19.980Z,1516706059.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:20.006Z,1516706060.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:14:20.007Z,1516706060.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:20.375Z,1516706060.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:20.412Z,1516706060.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:14:20.413Z,1516706060.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:20.777Z,1516706060.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:20.813Z,1516706060.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:14:20.814Z,1516706060.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:21.174Z,1516706061.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:21.197Z,1516706061.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:14:21.198Z,1516706061.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:21.587Z,1516706061.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:21.621Z,1516706061.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:14:21.622Z,1516706061.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:22.000Z,1516706062.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:22.015Z,1516706062.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:14:22.016Z,1516706062.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:22.388Z,1516706062.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:22.420Z,1516706062.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:14:22.421Z,1516706062.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:22.776Z,1516706062.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:22.812Z,1516706062.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:14:22.813Z,1516706062.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:23.176Z,1516706063.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:23.191Z,1516706063.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:14:23.192Z,1516706063.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:23.577Z,1516706063.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:23.592Z,1516706063.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:14:23.593Z,1516706063.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:23.980Z,1516706063.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:23.998Z,1516706063.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:14:24.003Z,1516706064.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:24.399Z,1516706064.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:24.413Z,1516706064.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:14:24.414Z,1516706064.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:24.794Z,1516706064.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:24.809Z,1516706064.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:14:24.810Z,1516706064.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:24.835Z,1516706064.835 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:14:25.194Z,1516706065.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:25.209Z,1516706065.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:14:25.210Z,1516706065.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:25.583Z,1516706065.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:25.608Z,1516706065.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:14:25.609Z,1516706065.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:25.980Z,1516706065.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:26.002Z,1516706066.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:14:26.003Z,1516706066.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:26.383Z,1516706066.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:26.398Z,1516706066.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:14:26.399Z,1516706066.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:26.785Z,1516706066.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:26.804Z,1516706066.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:14:26.805Z,1516706066.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:27.174Z,1516706067.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:27.205Z,1516706067.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:14:27.206Z,1516706067.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:27.595Z,1516706067.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:27.610Z,1516706067.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:14:27.611Z,1516706067.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:27.000Z,1516706068.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:28.014Z,1516706068.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:14:28.015Z,1516706068.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:28.392Z,1516706068.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:28.412Z,1516706068.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:14:28.413Z,1516706068.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:28.776Z,1516706068.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:28.808Z,1516706068.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:14:28.809Z,1516706068.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:29.175Z,1516706069.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:29.202Z,1516706069.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:14:29.203Z,1516706069.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:29.577Z,1516706069.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:29.603Z,1516706069.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:14:29.604Z,1516706069.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:29.975Z,1516706069.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:30.008Z,1516706070.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:14:30.009Z,1516706070.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:30.400Z,1516706070.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:30.414Z,1516706070.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:14:30.415Z,1516706070.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:30.796Z,1516706070.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:30.844Z,1516706070.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:14:30.845Z,1516706070.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:31.195Z,1516706071.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:31.210Z,1516706071.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:14:31.211Z,1516706071.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:31.577Z,1516706071.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:31.603Z,1516706071.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:14:31.604Z,1516706071.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:31.976Z,1516706071.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:32.009Z,1516706072.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:14:32.009Z,1516706072.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:32.376Z,1516706072.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:32.408Z,1516706072.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:14:32.409Z,1516706072.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:32.790Z,1516706072.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:32.804Z,1516706072.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:14:32.805Z,1516706072.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:33.174Z,1516706073.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:33.209Z,1516706073.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:14:33.210Z,1516706073.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:33.599Z,1516706073.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:33.613Z,1516706073.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:14:33.614Z,1516706073.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:33.000Z,1516706074.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:34.014Z,1516706074.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:14:34.015Z,1516706074.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:34.396Z,1516706074.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:34.411Z,1516706074.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:34.776Z,1516706074.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:34.812Z,1516706074.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:35.176Z,1516706075.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:35.209Z,1516706075.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:35.577Z,1516706075.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:35.614Z,1516706075.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:35.976Z,1516706075.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:36.013Z,1516706076.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:36.400Z,1516706076.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:36.415Z,1516706076.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:36.800Z,1516706076.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:36.815Z,1516706076.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:37.192Z,1516706077.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:37.222Z,1516706077.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:37.577Z,1516706077.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:37.605Z,1516706077.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:37.977Z,1516706077.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:38.009Z,1516706078.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:38.377Z,1516706078.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:38.403Z,1516706078.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:38.777Z,1516706078.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:38.816Z,1516706078.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:39.174Z,1516706079.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:39.213Z,1516706079.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:39.600Z,1516706079.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:39.615Z,1516706079.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:40.001Z,1516706080.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:40.016Z,1516706080.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:40.391Z,1516706080.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:40.430Z,1516706080.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:40.781Z,1516706080.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:40.808Z,1516706080.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:41.178Z,1516706081.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:41.215Z,1516706081.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:44.293Z,1516706084.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:44.313Z,1516706084.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:44.415Z,1516706084.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:44.459Z,1516706084.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:44.768Z,1516706084.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:44.783Z,1516706084.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:45.183Z,1516706085.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:45.209Z,1516706085.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:45.568Z,1516706085.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:45.583Z,1516706085.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:45.963Z,1516706085.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:45.979Z,1516706085.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:46.364Z,1516706086.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:46.379Z,1516706086.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:46.762Z,1516706086.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:46.785Z,1516706086.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:47.164Z,1516706087.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:47.180Z,1516706087.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:47.570Z,1516706087.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:47.589Z,1516706087.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:47.971Z,1516706087.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:47.986Z,1516706087.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:48.370Z,1516706088.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:48.393Z,1516706088.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:48.765Z,1516706088.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:48.780Z,1516706088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:49.160Z,1516706089.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:49.182Z,1516706089.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:49.572Z,1516706089.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:49.587Z,1516706089.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:49.965Z,1516706089.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:49.984Z,1516706089.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:50.372Z,1516706090.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:50.395Z,1516706090.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:50.777Z,1516706090.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:50.792Z,1516706090.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:51.176Z,1516706091.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:51.191Z,1516706091.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:51.564Z,1516706091.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:51.584Z,1516706091.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:51.959Z,1516706091.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:51.991Z,1516706091.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:52.376Z,1516706092.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:52.391Z,1516706092.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:52.774Z,1516706092.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:52.789Z,1516706092.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:53.174Z,1516706093.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:53.189Z,1516706093.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:53.566Z,1516706093.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:53.584Z,1516706093.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:53.960Z,1516706093.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:53.982Z,1516706093.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:54.374Z,1516706094.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:54.389Z,1516706094.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:54.778Z,1516706094.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:54.793Z,1516706094.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:55.174Z,1516706095.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:55.189Z,1516706095.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:55.564Z,1516706095.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:55.583Z,1516706095.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:55.966Z,1516706095.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:55.984Z,1516706095.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:56.374Z,1516706096.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:56.391Z,1516706096.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:56.778Z,1516706096.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:56.797Z,1516706096.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:57.171Z,1516706097.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:57.239Z,1516706097.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:57.561Z,1516706097.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:57.584Z,1516706097.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:57.960Z,1516706097.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:57.982Z,1516706097.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:58.376Z,1516706098.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:58.391Z,1516706098.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:58.774Z,1516706098.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:58.789Z,1516706098.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:59.176Z,1516706099.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:59.196Z,1516706099.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:59.570Z,1516706099.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:59.585Z,1516706099.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:14:59.954Z,1516706099.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:14:59.981Z,1516706099.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:00.374Z,1516706100.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:00.389Z,1516706100.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:00.778Z,1516706100.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:00.793Z,1516706100.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:01.174Z,1516706101.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:01.189Z,1516706101.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:01.563Z,1516706101.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:01.583Z,1516706101.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:01.966Z,1516706101.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:01.988Z,1516706101.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:02.375Z,1516706102.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:02.390Z,1516706102.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:02.778Z,1516706102.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:02.793Z,1516706102.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:03.176Z,1516706103.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:03.190Z,1516706103.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:03.561Z,1516706103.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:03.583Z,1516706103.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:03.960Z,1516706103.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:03.982Z,1516706103.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:04.376Z,1516706104.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:04.390Z,1516706104.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:04.774Z,1516706104.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:04.789Z,1516706104.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:05.174Z,1516706105.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:05.189Z,1516706105.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:05.566Z,1516706105.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:05.584Z,1516706105.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:05.954Z,1516706105.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:05.981Z,1516706105.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:06.374Z,1516706106.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:06.389Z,1516706106.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:06.778Z,1516706106.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:06.793Z,1516706106.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:07.175Z,1516706107.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:07.189Z,1516706107.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:07.561Z,1516706107.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:07.583Z,1516706107.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:07.966Z,1516706107.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:07.988Z,1516706107.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:08.375Z,1516706108.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:08.390Z,1516706108.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:08.779Z,1516706108.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:08.794Z,1516706108.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:09.179Z,1516706109.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:09.193Z,1516706109.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:09.559Z,1516706109.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:09.586Z,1516706109.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:09.970Z,1516706109.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:09.985Z,1516706109.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:10.356Z,1516706110.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:10.392Z,1516706110.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:10.772Z,1516706110.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:10.799Z,1516706110.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:11.186Z,1516706111.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:11.209Z,1516706111.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:11.584Z,1516706111.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:11.599Z,1516706111.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:11.961Z,1516706111.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:11.989Z,1516706111.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:12.357Z,1516706112.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:12.389Z,1516706112.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:12.757Z,1516706112.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:12.796Z,1516706112.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:13.156Z,1516706113.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:13.193Z,1516706113.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:13.580Z,1516706113.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:13.595Z,1516706113.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:13.980Z,1516706113.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:13.995Z,1516706113.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:14.375Z,1516706114.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:14.391Z,1516706114.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:14.756Z,1516706114.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:14.794Z,1516706114.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:15.156Z,1516706115.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:15.190Z,1516706115.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:15.554Z,1516706115.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:15.578Z,1516706115.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:15.957Z,1516706115.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:15.984Z,1516706115.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:16.356Z,1516706116.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:16.371Z,1516706116.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:16.767Z,1516706116.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:16.798Z,1516706116.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:17.179Z,1516706117.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:17.205Z,1516706117.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:17.571Z,1516706117.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:17.608Z,1516706117.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:17.964Z,1516706117.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:18.001Z,1516706118.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:18.362Z,1516706118.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:18.384Z,1516706118.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:18.762Z,1516706118.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:18.777Z,1516706118.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:19.163Z,1516706119.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:19.186Z,1516706119.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:19.568Z,1516706119.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:19.588Z,1516706119.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:19.972Z,1516706119.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:19.987Z,1516706119.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:20.368Z,1516706120.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:20.383Z,1516706120.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:20.764Z,1516706120.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:20.780Z,1516706120.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:21.164Z,1516706121.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:21.184Z,1516706121.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:21.561Z,1516706121.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:21.581Z,1516706121.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:21.964Z,1516706121.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:21.980Z,1516706121.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:22.364Z,1516706122.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:22.379Z,1516706122.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:22.771Z,1516706122.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:22.786Z,1516706122.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:23.171Z,1516706123.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:23.186Z,1516706123.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:23.568Z,1516706123.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:23.582Z,1516706123.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:23.964Z,1516706123.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:23.979Z,1516706123.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:24.363Z,1516706124.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:24.385Z,1516706124.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:24.765Z,1516706124.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:24.780Z,1516706124.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:25.164Z,1516706125.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:25.179Z,1516706125.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:25.567Z,1516706125.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:25.583Z,1516706125.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:25.971Z,1516706125.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:25.986Z,1516706125.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:26.367Z,1516706126.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:26.383Z,1516706126.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:26.763Z,1516706126.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:26.778Z,1516706126.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:27.164Z,1516706127.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:27.184Z,1516706127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:27.561Z,1516706127.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:27.576Z,1516706127.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:27.962Z,1516706127.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:27.991Z,1516706127.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:28.364Z,1516706128.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:28.378Z,1516706128.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:28.767Z,1516706128.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:28.782Z,1516706128.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:29.171Z,1516706129.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:29.186Z,1516706129.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:29.567Z,1516706129.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:29.582Z,1516706129.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:29.965Z,1516706129.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:29.981Z,1516706129.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:30.363Z,1516706130.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:30.378Z,1516706130.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:30.761Z,1516706130.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:30.788Z,1516706130.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:31.162Z,1516706131.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:31.189Z,1516706131.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:31.574Z,1516706131.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:31.593Z,1516706131.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:31.974Z,1516706131.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:31.989Z,1516706131.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:32.374Z,1516706132.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:32.393Z,1516706132.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:32.764Z,1516706132.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:32.779Z,1516706132.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:33.160Z,1516706133.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:33.185Z,1516706133.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:33.560Z,1516706133.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:33.582Z,1516706133.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:33.960Z,1516706133.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:33.982Z,1516706133.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:34.361Z,1516706134.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:34.393Z,1516706134.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:34.774Z,1516706134.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:34.790Z,1516706134.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:35.173Z,1516706135.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:35.193Z,1516706135.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:35.575Z,1516706135.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:35.590Z,1516706135.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:35.960Z,1516706135.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:35.982Z,1516706135.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:36.360Z,1516706136.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:36.378Z,1516706136.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:36.764Z,1516706136.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:36.786Z,1516706136.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:37.160Z,1516706137.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:37.182Z,1516706137.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:37.574Z,1516706137.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:37.589Z,1516706137.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:37.979Z,1516706137.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:37.994Z,1516706137.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:38.375Z,1516706138.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:38.389Z,1516706138.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:38.759Z,1516706138.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:38.783Z,1516706138.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:39.160Z,1516706139.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:39.197Z,1516706139.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:39.554Z,1516706139.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:39.589Z,1516706139.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:39.963Z,1516706139.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:39.996Z,1516706139.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:40.357Z,1516706140.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:40.393Z,1516706140.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:40.775Z,1516706140.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:40.790Z,1516706140.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:41.177Z,1516706141.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:41.204Z,1516706141.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:41.575Z,1516706141.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:41.609Z,1516706141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:44.662Z,1516706144.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:44.678Z,1516706144.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:44.791Z,1516706144.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:44.825Z,1516706144.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:45.175Z,1516706145.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:45.201Z,1516706145.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:45.579Z,1516706145.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:45.609Z,1516706145.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:45.975Z,1516706145.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:45.997Z,1516706145.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:46.362Z,1516706146.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:46.378Z,1516706146.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:46.765Z,1516706146.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:46.780Z,1516706146.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:47.167Z,1516706147.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:47.182Z,1516706147.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:47.579Z,1516706147.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:47.615Z,1516706147.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:47.979Z,1516706147.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:47.994Z,1516706147.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:48.372Z,1516706148.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:48.386Z,1516706148.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:48.766Z,1516706148.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:48.789Z,1516706148.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:49.162Z,1516706149.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:49.177Z,1516706149.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:49.564Z,1516706149.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:49.593Z,1516706149.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:49.968Z,1516706149.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:49.983Z,1516706149.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:50.357Z,1516706150.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:50.384Z,1516706150.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:50.774Z,1516706150.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:50.789Z,1516706150.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:51.175Z,1516706151.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:51.190Z,1516706151.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:51.571Z,1516706151.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:51.586Z,1516706151.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:51.969Z,1516706151.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:51.989Z,1516706151.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:52.369Z,1516706152.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:52.385Z,1516706152.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:52.757Z,1516706152.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:52.781Z,1516706152.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:53.159Z,1516706153.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:53.174Z,1516706153.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:53.572Z,1516706153.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:53.587Z,1516706153.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:53.974Z,1516706153.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:53.990Z,1516706153.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:54.370Z,1516706154.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:54.385Z,1516706154.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:54.762Z,1516706154.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:54.780Z,1516706154.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:55.157Z,1516706155.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:55.179Z,1516706155.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:55.571Z,1516706155.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:55.598Z,1516706155.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:55.965Z,1516706155.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:55.988Z,1516706155.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:56.368Z,1516706156.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:56.396Z,1516706156.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:56.792Z,1516706156.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:56.837Z,1516706156.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:57.178Z,1516706157.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:57.217Z,1516706157.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:57.570Z,1516706157.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:57.600Z,1516706157.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:57.988Z,1516706157.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:58.016Z,1516706158.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:58.365Z,1516706158.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:58.415Z,1516706158.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:58.766Z,1516706158.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:58.802Z,1516706158.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:59.166Z,1516706159.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:59.212Z,1516706159.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:59.568Z,1516706159.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:15:59.618Z,1516706159.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:15:59.974Z,1516706159.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:00.022Z,1516706160.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:00.386Z,1516706160.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:00.433Z,1516706160.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:00.767Z,1516706160.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:00.832Z,1516706160.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:01.167Z,1516706161.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:01.223Z,1516706161.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:01.559Z,1516706161.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:01.621Z,1516706161.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:01.963Z,1516706161.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:02.045Z,1516706162.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:02.363Z,1516706162.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:02.427Z,1516706162.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:02.773Z,1516706162.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:02.841Z,1516706162.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:03.177Z,1516706163.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:03.204Z,1516706163.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:03.578Z,1516706163.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:03.603Z,1516706163.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:03.987Z,1516706163.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:04.038Z,1516706164.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:04.358Z,1516706164.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:04.385Z,1516706164.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:04.762Z,1516706164.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:04.798Z,1516706164.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:05.158Z,1516706165.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:05.198Z,1516706165.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:05.573Z,1516706165.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:05.621Z,1516706165.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:05.974Z,1516706165.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:06.017Z,1516706166.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:06.378Z,1516706166.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:06.419Z,1516706166.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:06.763Z,1516706166.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:06.811Z,1516706166.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:07.163Z,1516706167.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:07.186Z,1516706167.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:07.566Z,1516706167.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:07.586Z,1516706167.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:07.964Z,1516706167.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:07.992Z,1516706167.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:08.354Z,1516706168.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:08.397Z,1516706168.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:08.778Z,1516706168.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:08.805Z,1516706168.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:09.178Z,1516706169.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:09.235Z,1516706169.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:09.578Z,1516706169.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:09.597Z,1516706169.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:09.958Z,1516706169.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:10.005Z,1516706170.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:10.358Z,1516706170.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:10.416Z,1516706170.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:10.760Z,1516706170.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:10.803Z,1516706170.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:11.181Z,1516706171.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:11.220Z,1516706171.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:11.580Z,1516706171.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:11.671Z,1516706171.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:11.972Z,1516706171.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:11.986Z,1516706171.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:12.379Z,1516706172.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:12.410Z,1516706172.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:12.761Z,1516706172.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:12.776Z,1516706172.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:13.160Z,1516706173.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:13.175Z,1516706173.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:13.560Z,1516706173.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:13.575Z,1516706173.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:13.966Z,1516706173.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:13.981Z,1516706173.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:14.364Z,1516706174.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:14.379Z,1516706174.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:14.766Z,1516706174.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:14.785Z,1516706174.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:15.171Z,1516706175.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:15.186Z,1516706175.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:15.568Z,1516706175.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:15.583Z,1516706175.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:15.961Z,1516706175.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:15.975Z,1516706175.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:16.361Z,1516706176.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:16.376Z,1516706176.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:16.756Z,1516706176.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:16.783Z,1516706176.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:17.160Z,1516706177.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:17.181Z,1516706177.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:17.570Z,1516706177.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:17.592Z,1516706177.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:17.972Z,1516706177.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:17.986Z,1516706177.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:18.370Z,1516706178.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:18.389Z,1516706178.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:18.761Z,1516706178.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:18.776Z,1516706178.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:19.161Z,1516706179.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:19.181Z,1516706179.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:19.556Z,1516706179.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:19.574Z,1516706179.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:19.962Z,1516706179.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:19.977Z,1516706179.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:20.356Z,1516706180.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:20.378Z,1516706180.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:20.771Z,1516706180.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:20.786Z,1516706180.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:21.174Z,1516706181.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:21.189Z,1516706181.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:21.574Z,1516706181.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:21.589Z,1516706181.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:21.956Z,1516706181.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:21.978Z,1516706181.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:22.360Z,1516706182.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:22.385Z,1516706182.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:22.753Z,1516706182.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:22.789Z,1516706182.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:23.158Z,1516706183.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:23.188Z,1516706183.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:23.580Z,1516706183.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:23.595Z,1516706183.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:23.979Z,1516706183.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:23.994Z,1516706183.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:24.375Z,1516706184.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:24.390Z,1516706184.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:24.752Z,1516706184.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:24.793Z,1516706184.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:25.156Z,1516706185.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:25.189Z,1516706185.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:25.552Z,1516706185.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:25.585Z,1516706185.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:25.953Z,1516706185.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:25.968Z,1516706185.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:26.356Z,1516706186.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:26.393Z,1516706186.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:26.772Z,1516706186.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:26.797Z,1516706186.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:27.167Z,1516706187.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:27.196Z,1516706187.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:27.568Z,1516706187.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:27.595Z,1516706187.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:27.965Z,1516706187.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:28.001Z,1516706188.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:28.364Z,1516706188.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:28.378Z,1516706188.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:28.763Z,1516706188.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:28.778Z,1516706188.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:29.159Z,1516706189.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:29.174Z,1516706189.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:29.568Z,1516706189.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:29.583Z,1516706189.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:29.968Z,1516706189.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:29.983Z,1516706189.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:30.364Z,1516706190.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:30.379Z,1516706190.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:30.760Z,1516706190.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:30.780Z,1516706190.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:31.160Z,1516706191.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:31.176Z,1516706191.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:31.560Z,1516706191.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:31.576Z,1516706191.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:31.961Z,1516706191.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:31.976Z,1516706191.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:32.360Z,1516706192.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:32.375Z,1516706192.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:32.764Z,1516706192.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:32.779Z,1516706192.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:33.167Z,1516706193.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:33.182Z,1516706193.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:33.564Z,1516706193.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:33.578Z,1516706193.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:33.962Z,1516706193.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:33.977Z,1516706193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:34.360Z,1516706194.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:34.387Z,1516706194.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:34.760Z,1516706194.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:34.781Z,1516706194.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:35.162Z,1516706195.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:35.178Z,1516706195.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:35.564Z,1516706195.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:35.579Z,1516706195.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:35.976Z,1516706195.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:36.012Z,1516706196.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:36.368Z,1516706196.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:36.384Z,1516706196.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:36.762Z,1516706196.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:36.777Z,1516706196.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:37.161Z,1516706197.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:37.181Z,1516706197.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:37.565Z,1516706197.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:37.581Z,1516706197.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:37.963Z,1516706197.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:37.977Z,1516706197.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:38.356Z,1516706198.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:38.376Z,1516706198.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:38.766Z,1516706198.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:38.781Z,1516706198.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:39.166Z,1516706199.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:39.181Z,1516706199.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:39.568Z,1516706199.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:39.583Z,1516706199.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:39.586Z,1516706199.586 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:11:39.3Z 2018-01-23T11:16:39.586Z,1516706199.586 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:16:39.586Z,1516706199.586 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:16:39.961Z,1516706199.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:39.984Z,1516706199.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:40.480Z,1516706200.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:40.495Z,1516706200.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:40.767Z,1516706200.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:40.782Z,1516706200.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:43.871Z,1516706203.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:43.886Z,1516706203.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:43.960Z,1516706203.960 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0188.lzma 2018-01-23T11:16:43.993Z,1516706203.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:44.020Z,1516706204.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:44.347Z,1516706204.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:44.378Z,1516706204.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:44.709Z,1516706204.709 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0188.lzma.bak 2018-01-23T11:16:44.710Z,1516706204.710 [DataOverHttps](INFO): SBD MOMSN=7755481 2018-01-23T11:16:44.759Z,1516706204.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:44.783Z,1516706204.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:45.380Z,1516706205.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:45.401Z,1516706205.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:45.543Z,1516706205.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:45.730Z,1516706205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:48.636Z,1516706208.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:48.651Z,1516706208.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:48.750Z,1516706208.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:48.789Z,1516706208.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:49.143Z,1516706209.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:49.158Z,1516706209.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:49.543Z,1516706209.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:49.564Z,1516706209.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:49.945Z,1516706209.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:49.960Z,1516706209.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:50.338Z,1516706210.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:50.361Z,1516706210.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:53.426Z,1516706213.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:53.450Z,1516706213.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:53.531Z,1516706213.531 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0189.lzma 2018-01-23T11:16:53.552Z,1516706213.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:53.566Z,1516706213.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:53.917Z,1516706213.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:53.945Z,1516706213.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:54.273Z,1516706214.273 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0189.lzma.bak 2018-01-23T11:16:54.274Z,1516706214.274 [DataOverHttps](INFO): SBD MOMSN=7755483 2018-01-23T11:16:54.317Z,1516706214.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:54.336Z,1516706214.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:54.949Z,1516706214.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:54.973Z,1516706214.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:54.976Z,1516706214.976 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:16:54.976Z,1516706214.976 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:16:54.976Z,1516706214.976 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:16:55.101Z,1516706215.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:55.141Z,1516706215.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:58.218Z,1516706218.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:58.255Z,1516706218.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:58.341Z,1516706218.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:58.356Z,1516706218.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:58.707Z,1516706218.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:58.748Z,1516706218.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:59.121Z,1516706219.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:59.129Z,1516706219.129 [PNI_TCM](ERROR): CRC does not match. Expected:0x62490 got:0x44299 2018-01-23T11:16:59.154Z,1516706219.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:59.507Z,1516706219.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:59.550Z,1516706219.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:16:59.902Z,1516706219.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:16:59.935Z,1516706219.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:00.310Z,1516706220.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:00.329Z,1516706220.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:00.701Z,1516706220.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:00.729Z,1516706220.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:01.111Z,1516706221.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:01.156Z,1516706221.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:01.500Z,1516706221.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:01.532Z,1516706221.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:01.924Z,1516706221.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:01.940Z,1516706221.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:02.326Z,1516706222.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:02.341Z,1516706222.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:02.717Z,1516706222.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:02.760Z,1516706222.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:03.097Z,1516706223.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:03.130Z,1516706223.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:03.497Z,1516706223.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:03.535Z,1516706223.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:03.897Z,1516706223.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:03.930Z,1516706223.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:04.297Z,1516706224.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:04.328Z,1516706224.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:04.722Z,1516706224.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:04.760Z,1516706224.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:05.128Z,1516706225.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:05.145Z,1516706225.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:05.507Z,1516706225.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:05.538Z,1516706225.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:05.897Z,1516706225.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:05.942Z,1516706225.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:06.300Z,1516706226.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:06.340Z,1516706226.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:06.701Z,1516706226.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:06.737Z,1516706226.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:07.182Z,1516706227.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:07.202Z,1516706227.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:07.501Z,1516706227.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:07.546Z,1516706227.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:07.919Z,1516706227.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:07.951Z,1516706227.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:08.322Z,1516706228.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:08.341Z,1516706228.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:08.716Z,1516706228.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:08.734Z,1516706228.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:09.098Z,1516706229.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:09.124Z,1516706229.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:09.496Z,1516706229.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:09.531Z,1516706229.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:09.897Z,1516706229.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:09.936Z,1516706229.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:10.309Z,1516706230.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:10.331Z,1516706230.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:10.712Z,1516706230.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:10.744Z,1516706230.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:11.120Z,1516706231.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:11.135Z,1516706231.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:11.519Z,1516706231.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:11.544Z,1516706231.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:11.897Z,1516706231.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:11.924Z,1516706231.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:12.297Z,1516706232.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:12.323Z,1516706232.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:12.734Z,1516706232.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:12.767Z,1516706232.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:13.097Z,1516706233.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:13.132Z,1516706233.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:13.509Z,1516706233.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:13.524Z,1516706233.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:13.919Z,1516706233.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:13.934Z,1516706233.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:14.318Z,1516706234.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:14.333Z,1516706234.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:14.716Z,1516706234.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:14.736Z,1516706234.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:15.110Z,1516706235.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:15.125Z,1516706235.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:15.505Z,1516706235.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:15.524Z,1516706235.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:15.524Z,1516706235.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160 2018-01-23T11:17:15.524Z,1516706235.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:17:15.525Z,1516706235.525 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:15.526Z,1516706235.526 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 160 2018-01-23T11:17:15.526Z,1516706235.526 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:17:15.528Z,1516706235.528 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:15.528Z,1516706235.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160 2018-01-23T11:17:15.528Z,1516706235.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:17:15.540Z,1516706235.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:17:15.540Z,1516706235.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:17:15.540Z,1516706235.540 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:17:15.897Z,1516706235.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:15.946Z,1516706235.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:17:15.946Z,1516706235.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160 2018-01-23T11:17:15.947Z,1516706235.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:17:15.947Z,1516706235.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 160 2018-01-23T11:17:15.947Z,1516706235.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:17:15.947Z,1516706235.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160 2018-01-23T11:17:16.297Z,1516706236.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:16.329Z,1516706236.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:17:16.329Z,1516706236.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:17:16.329Z,1516706236.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:17:16.330Z,1516706236.330 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:17:16.330Z,1516706236.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:17:16.335Z,1516706236.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:17:16.335Z,1516706236.335 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:17:16.336Z,1516706236.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:17:16.336Z,1516706236.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:17:16.716Z,1516706236.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:16.738Z,1516706236.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:17:16.739Z,1516706236.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:17.120Z,1516706237.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:17.140Z,1516706237.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:17:17.141Z,1516706237.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:17.511Z,1516706237.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:17.547Z,1516706237.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:17:17.548Z,1516706237.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:17.900Z,1516706237.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:17.927Z,1516706237.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:17:17.928Z,1516706237.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:18.297Z,1516706238.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:18.330Z,1516706238.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:17:18.331Z,1516706238.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:18.701Z,1516706238.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:18.726Z,1516706238.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:17:18.728Z,1516706238.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:19.097Z,1516706239.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:19.132Z,1516706239.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:17:19.133Z,1516706239.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:19.497Z,1516706239.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:19.529Z,1516706239.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:17:19.530Z,1516706239.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:19.916Z,1516706239.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:19.930Z,1516706239.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:17:19.931Z,1516706239.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:20.327Z,1516706240.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:20.341Z,1516706240.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:17:20.342Z,1516706240.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:20.716Z,1516706240.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:20.736Z,1516706240.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:17:20.737Z,1516706240.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:21.101Z,1516706241.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:21.126Z,1516706241.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:17:21.128Z,1516706241.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:21.497Z,1516706241.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:21.528Z,1516706241.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:17:21.529Z,1516706241.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:21.897Z,1516706241.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:21.933Z,1516706241.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:17:21.934Z,1516706241.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:22.297Z,1516706242.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:22.333Z,1516706242.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:17:22.334Z,1516706242.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:22.720Z,1516706242.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:22.735Z,1516706242.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:17:22.736Z,1516706242.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:23.120Z,1516706243.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:23.141Z,1516706243.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:17:23.142Z,1516706243.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:23.519Z,1516706243.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:23.534Z,1516706243.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:17:23.535Z,1516706243.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:23.896Z,1516706243.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:23.932Z,1516706243.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:17:23.933Z,1516706243.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:24.297Z,1516706244.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:24.333Z,1516706244.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:17:24.334Z,1516706244.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:24.701Z,1516706244.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:24.731Z,1516706244.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:17:24.732Z,1516706244.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:25.101Z,1516706245.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:25.132Z,1516706245.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:17:25.133Z,1516706245.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:25.497Z,1516706245.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:25.511Z,1516706245.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:17:25.512Z,1516706245.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:25.915Z,1516706245.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:25.941Z,1516706245.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:17:25.942Z,1516706245.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:26.319Z,1516706246.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:26.345Z,1516706246.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:17:26.347Z,1516706246.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:26.736Z,1516706246.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:26.750Z,1516706246.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:17:26.751Z,1516706246.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:27.105Z,1516706247.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:27.140Z,1516706247.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:17:27.141Z,1516706247.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:27.504Z,1516706247.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:27.524Z,1516706247.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:17:27.525Z,1516706247.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:27.904Z,1516706247.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:27.918Z,1516706247.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:17:27.919Z,1516706247.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:28.301Z,1516706248.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:28.320Z,1516706248.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:17:28.321Z,1516706248.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:28.707Z,1516706248.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:28.722Z,1516706248.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:17:28.723Z,1516706248.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:29.111Z,1516706249.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:29.132Z,1516706249.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:17:29.133Z,1516706249.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:29.519Z,1516706249.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:29.534Z,1516706249.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:17:29.555Z,1516706249.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:29.908Z,1516706249.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:29.928Z,1516706249.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:17:29.929Z,1516706249.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:30.305Z,1516706250.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:30.319Z,1516706250.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:17:30.320Z,1516706250.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:30.701Z,1516706250.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:30.722Z,1516706250.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:17:30.723Z,1516706250.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:31.101Z,1516706251.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:31.122Z,1516706251.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:17:31.123Z,1516706251.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:31.505Z,1516706251.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:31.520Z,1516706251.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:17:31.520Z,1516706251.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:31.910Z,1516706251.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:31.932Z,1516706251.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:17:31.933Z,1516706251.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:32.313Z,1516706252.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:32.329Z,1516706252.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:17:32.330Z,1516706252.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:32.714Z,1516706252.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:32.736Z,1516706252.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:17:32.737Z,1516706252.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:33.109Z,1516706253.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:33.123Z,1516706253.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:17:33.124Z,1516706253.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:33.507Z,1516706253.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:33.522Z,1516706253.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:17:33.523Z,1516706253.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:33.897Z,1516706253.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:33.932Z,1516706253.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:17:33.933Z,1516706253.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:34.297Z,1516706254.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:34.332Z,1516706254.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:17:34.333Z,1516706254.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:34.715Z,1516706254.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:34.730Z,1516706254.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:17:34.731Z,1516706254.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:35.119Z,1516706255.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:35.140Z,1516706255.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:17:35.141Z,1516706255.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:35.512Z,1516706255.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:35.533Z,1516706255.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:35.896Z,1516706255.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:35.929Z,1516706255.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:36.296Z,1516706256.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:36.330Z,1516706256.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:36.701Z,1516706256.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:36.727Z,1516706256.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:37.097Z,1516706257.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:37.129Z,1516706257.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:37.497Z,1516706257.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:37.532Z,1516706257.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:37.916Z,1516706257.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:37.931Z,1516706257.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:38.317Z,1516706258.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:38.349Z,1516706258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:38.720Z,1516706258.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:38.735Z,1516706258.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:39.097Z,1516706259.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:39.129Z,1516706259.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:39.496Z,1516706259.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:39.529Z,1516706259.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:39.897Z,1516706259.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:39.935Z,1516706259.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:40.297Z,1516706260.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:40.328Z,1516706260.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:40.724Z,1516706260.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:40.738Z,1516706260.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:41.121Z,1516706261.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:41.136Z,1516706261.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:41.512Z,1516706261.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:41.534Z,1516706261.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:41.897Z,1516706261.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:41.929Z,1516706261.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:42.297Z,1516706262.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:42.336Z,1516706262.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:42.694Z,1516706262.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:42.718Z,1516706262.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:43.097Z,1516706263.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:43.129Z,1516706263.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:43.497Z,1516706263.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:43.512Z,1516706263.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:43.907Z,1516706263.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:43.941Z,1516706263.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:44.320Z,1516706264.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:44.346Z,1516706264.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:44.711Z,1516706264.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:44.748Z,1516706264.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:45.105Z,1516706265.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:45.137Z,1516706265.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:45.504Z,1516706265.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:45.525Z,1516706265.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:45.907Z,1516706265.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:45.921Z,1516706265.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:46.301Z,1516706266.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:46.324Z,1516706266.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:46.715Z,1516706266.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:46.730Z,1516706266.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:47.115Z,1516706267.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:47.129Z,1516706267.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:47.513Z,1516706267.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:47.536Z,1516706267.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:47.906Z,1516706267.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:47.925Z,1516706267.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:48.304Z,1516706268.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:48.334Z,1516706268.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:48.694Z,1516706268.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:48.722Z,1516706268.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:49.099Z,1516706269.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:49.133Z,1516706269.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:49.505Z,1516706269.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:49.521Z,1516706269.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:49.918Z,1516706269.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:49.934Z,1516706269.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:50.318Z,1516706270.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:50.333Z,1516706270.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:50.714Z,1516706270.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:50.746Z,1516706270.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:51.097Z,1516706271.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:51.128Z,1516706271.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:51.501Z,1516706271.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:51.532Z,1516706271.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:51.897Z,1516706271.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:51.912Z,1516706271.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:52.298Z,1516706272.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:52.313Z,1516706272.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:52.715Z,1516706272.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:52.749Z,1516706272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:53.119Z,1516706273.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:53.145Z,1516706273.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:53.511Z,1516706273.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:53.526Z,1516706273.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:53.902Z,1516706273.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:53.925Z,1516706273.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:54.302Z,1516706274.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:54.329Z,1516706274.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:54.701Z,1516706274.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:54.728Z,1516706274.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:55.104Z,1516706275.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:55.131Z,1516706275.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:55.511Z,1516706275.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:55.525Z,1516706275.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:58.612Z,1516706278.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:58.633Z,1516706278.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:58.758Z,1516706278.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:58.805Z,1516706278.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:59.116Z,1516706279.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:59.130Z,1516706279.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:59.506Z,1516706279.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:59.521Z,1516706279.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:17:59.900Z,1516706279.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:17:59.927Z,1516706279.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:00.304Z,1516706280.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:00.328Z,1516706280.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:00.715Z,1516706280.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:00.730Z,1516706280.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:01.118Z,1516706281.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:01.141Z,1516706281.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:01.513Z,1516706281.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:01.540Z,1516706281.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:01.897Z,1516706281.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:01.932Z,1516706281.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:02.297Z,1516706282.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:02.328Z,1516706282.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:02.697Z,1516706282.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:02.711Z,1516706282.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:03.101Z,1516706283.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:03.117Z,1516706283.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:03.504Z,1516706283.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:03.541Z,1516706283.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:03.915Z,1516706283.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:03.949Z,1516706283.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:04.311Z,1516706284.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:04.326Z,1516706284.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:04.711Z,1516706284.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:04.726Z,1516706284.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:05.104Z,1516706285.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:05.119Z,1516706285.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:05.503Z,1516706285.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:05.526Z,1516706285.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:05.907Z,1516706285.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:05.929Z,1516706285.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:06.309Z,1516706286.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:06.324Z,1516706286.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:06.709Z,1516706286.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:06.729Z,1516706286.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:07.111Z,1516706287.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:07.126Z,1516706287.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:07.510Z,1516706287.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:07.525Z,1516706287.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:07.910Z,1516706287.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:07.925Z,1516706287.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:08.304Z,1516706288.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:08.319Z,1516706288.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:08.703Z,1516706288.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:08.729Z,1516706288.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:09.104Z,1516706289.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:09.123Z,1516706289.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:09.504Z,1516706289.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:09.519Z,1516706289.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:09.911Z,1516706289.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:09.926Z,1516706289.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:10.310Z,1516706290.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:10.329Z,1516706290.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:10.710Z,1516706290.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:10.729Z,1516706290.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:11.109Z,1516706291.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:11.124Z,1516706291.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:11.500Z,1516706291.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:11.520Z,1516706291.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:11.900Z,1516706291.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:11.933Z,1516706291.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:12.309Z,1516706292.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:12.325Z,1516706292.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:12.715Z,1516706292.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:12.730Z,1516706292.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:13.113Z,1516706293.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:13.133Z,1516706293.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:13.514Z,1516706293.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:13.529Z,1516706293.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:13.905Z,1516706293.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:13.925Z,1516706293.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:14.302Z,1516706294.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:14.325Z,1516706294.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:14.696Z,1516706294.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:14.733Z,1516706294.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:15.097Z,1516706295.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:15.124Z,1516706295.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:15.496Z,1516706295.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:15.529Z,1516706295.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:15.884Z,1516706295.884 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T11:18:15.884Z,1516706295.884 [NAL9602] Data Fault, FailCount= 4 2018-01-23T11:18:15.884Z,1516706295.884 [NAL9602](ERROR): Data Fault 2018-01-23T11:18:15.901Z,1516706295.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:15.938Z,1516706295.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:15.975Z,1516706295.975 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T11:18:16.280Z,1516706296.280 [NAL9602](INFO): Powering down 2018-01-23T11:18:16.297Z,1516706296.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:16.329Z,1516706296.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:16.696Z,1516706296.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:16.732Z,1516706296.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:17.096Z,1516706297.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:17.129Z,1516706297.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:17.141Z,1516706297.141 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T11:18:17.141Z,1516706297.141 [NAL9602] No Fault, FailCount= 4 2018-01-23T11:18:17.493Z,1516706297.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:17.517Z,1516706297.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:17.904Z,1516706297.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:17.930Z,1516706297.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:18.296Z,1516706298.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:18.333Z,1516706298.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:18.693Z,1516706298.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:18.709Z,1516706298.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:19.096Z,1516706299.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:19.133Z,1516706299.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:19.500Z,1516706299.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:19.515Z,1516706299.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:19.897Z,1516706299.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:19.912Z,1516706299.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:20.301Z,1516706300.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:20.321Z,1516706300.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:20.701Z,1516706300.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:20.716Z,1516706300.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:21.101Z,1516706301.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:21.116Z,1516706301.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:21.504Z,1516706301.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:21.519Z,1516706301.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:21.901Z,1516706301.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:21.936Z,1516706301.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:22.300Z,1516706302.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:22.316Z,1516706302.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:22.700Z,1516706302.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:22.729Z,1516706302.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:23.105Z,1516706303.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:23.121Z,1516706303.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:23.503Z,1516706303.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:23.519Z,1516706303.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:23.904Z,1516706303.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:23.920Z,1516706303.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:24.303Z,1516706304.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:24.318Z,1516706304.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:24.702Z,1516706304.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:24.717Z,1516706304.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:25.103Z,1516706305.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:25.118Z,1516706305.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:25.504Z,1516706305.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:25.524Z,1516706305.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:25.903Z,1516706305.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:25.918Z,1516706305.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:26.300Z,1516706306.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:26.328Z,1516706306.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:26.703Z,1516706306.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:26.718Z,1516706306.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:27.106Z,1516706307.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:27.121Z,1516706307.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:27.503Z,1516706307.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:27.517Z,1516706307.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:27.904Z,1516706307.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:27.918Z,1516706307.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:28.301Z,1516706308.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:28.317Z,1516706308.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:28.703Z,1516706308.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:28.719Z,1516706308.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:29.103Z,1516706309.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:29.119Z,1516706309.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:29.502Z,1516706309.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:29.517Z,1516706309.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:29.903Z,1516706309.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:29.918Z,1516706309.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:30.305Z,1516706310.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:30.320Z,1516706310.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:30.702Z,1516706310.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:30.717Z,1516706310.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:31.103Z,1516706311.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:31.118Z,1516706311.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:31.505Z,1516706311.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:31.520Z,1516706311.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:31.903Z,1516706311.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:31.918Z,1516706311.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:32.303Z,1516706312.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:32.325Z,1516706312.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:32.706Z,1516706312.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:32.720Z,1516706312.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:33.104Z,1516706313.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:33.119Z,1516706313.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:33.502Z,1516706313.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:33.529Z,1516706313.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:33.905Z,1516706313.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:33.920Z,1516706313.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:34.302Z,1516706314.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:34.317Z,1516706314.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:34.703Z,1516706314.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:34.718Z,1516706314.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:35.103Z,1516706315.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:35.118Z,1516706315.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:35.501Z,1516706315.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:35.517Z,1516706315.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:35.903Z,1516706315.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:35.921Z,1516706315.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:36.303Z,1516706316.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:36.318Z,1516706316.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:36.701Z,1516706316.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:36.716Z,1516706316.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:37.105Z,1516706317.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:37.119Z,1516706317.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:37.505Z,1516706317.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:37.520Z,1516706317.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:37.905Z,1516706317.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:37.920Z,1516706317.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:38.304Z,1516706318.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:38.319Z,1516706318.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:38.705Z,1516706318.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:38.720Z,1516706318.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:39.105Z,1516706319.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:39.120Z,1516706319.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:39.503Z,1516706319.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:39.517Z,1516706319.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:39.904Z,1516706319.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:39.919Z,1516706319.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:40.301Z,1516706320.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:40.316Z,1516706320.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:40.703Z,1516706320.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:40.718Z,1516706320.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:41.105Z,1516706321.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:41.119Z,1516706321.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:41.501Z,1516706321.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:41.516Z,1516706321.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:41.903Z,1516706321.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:41.917Z,1516706321.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:42.302Z,1516706322.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:42.329Z,1516706322.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:42.701Z,1516706322.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:42.716Z,1516706322.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:43.103Z,1516706323.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:43.117Z,1516706323.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:43.502Z,1516706323.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:43.529Z,1516706323.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:43.905Z,1516706323.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:43.920Z,1516706323.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:44.303Z,1516706324.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:44.317Z,1516706324.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:44.700Z,1516706324.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:44.727Z,1516706324.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:45.104Z,1516706325.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:45.119Z,1516706325.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:45.504Z,1516706325.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:45.518Z,1516706325.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:45.904Z,1516706325.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:45.919Z,1516706325.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:46.301Z,1516706326.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:46.316Z,1516706326.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:46.680Z,1516706326.680 [NAL9602](INFO): Powering up NAL9602 2018-01-23T11:18:46.699Z,1516706326.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:46.732Z,1516706326.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:47.100Z,1516706327.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:47.124Z,1516706327.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:47.502Z,1516706327.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:47.522Z,1516706327.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:47.904Z,1516706327.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:47.918Z,1516706327.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:48.304Z,1516706328.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:48.320Z,1516706328.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:48.704Z,1516706328.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:48.719Z,1516706328.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:49.104Z,1516706329.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:49.118Z,1516706329.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:49.504Z,1516706329.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:49.519Z,1516706329.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:49.904Z,1516706329.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:49.919Z,1516706329.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:50.304Z,1516706330.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:50.318Z,1516706330.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:50.704Z,1516706330.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:50.719Z,1516706330.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:51.104Z,1516706331.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:51.119Z,1516706331.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:51.504Z,1516706331.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:51.518Z,1516706331.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:51.908Z,1516706331.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:51.923Z,1516706331.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:52.304Z,1516706332.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:52.319Z,1516706332.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:52.704Z,1516706332.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:52.718Z,1516706332.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:53.108Z,1516706333.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:53.123Z,1516706333.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:53.501Z,1516706333.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:53.539Z,1516706333.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:53.904Z,1516706333.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:53.919Z,1516706333.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:54.304Z,1516706334.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:54.319Z,1516706334.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:54.704Z,1516706334.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:54.719Z,1516706334.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:55.102Z,1516706335.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:55.121Z,1516706335.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:55.508Z,1516706335.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:55.524Z,1516706335.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:55.904Z,1516706335.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:55.919Z,1516706335.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:59.021Z,1516706339.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:59.036Z,1516706339.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:59.161Z,1516706339.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:59.206Z,1516706339.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:59.502Z,1516706339.502 [NAL9602](INFO): NAL9602 initialized 2018-01-23T11:18:59.519Z,1516706339.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:59.533Z,1516706339.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:18:59.921Z,1516706339.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:18:59.936Z,1516706339.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:00.324Z,1516706340.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:00.339Z,1516706340.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:00.731Z,1516706340.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:00.746Z,1516706340.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:01.124Z,1516706341.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:01.138Z,1516706341.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:01.517Z,1516706341.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:01.540Z,1516706341.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:01.920Z,1516706341.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:01.940Z,1516706341.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:02.320Z,1516706342.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:02.348Z,1516706342.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:02.726Z,1516706342.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:02.742Z,1516706342.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:03.128Z,1516706343.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:03.143Z,1516706343.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:03.527Z,1516706343.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:03.543Z,1516706343.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:03.921Z,1516706343.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:03.937Z,1516706343.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:04.326Z,1516706344.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:04.342Z,1516706344.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:04.723Z,1516706344.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:04.738Z,1516706344.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:05.122Z,1516706345.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:05.137Z,1516706345.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:05.525Z,1516706345.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:05.548Z,1516706345.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:05.932Z,1516706345.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:05.952Z,1516706345.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:06.332Z,1516706346.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:06.347Z,1516706346.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:06.717Z,1516706346.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:06.749Z,1516706346.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:07.126Z,1516706347.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:07.141Z,1516706347.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:07.510Z,1516706347.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:07.538Z,1516706347.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:07.913Z,1516706347.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:07.949Z,1516706347.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:08.316Z,1516706348.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:08.345Z,1516706348.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:08.731Z,1516706348.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:08.753Z,1516706348.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:09.136Z,1516706349.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:09.151Z,1516706349.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:09.526Z,1516706349.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:09.559Z,1516706349.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:09.912Z,1516706349.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:09.939Z,1516706349.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:10.312Z,1516706350.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:10.345Z,1516706350.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:10.713Z,1516706350.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:10.753Z,1516706350.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:11.116Z,1516706351.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:11.142Z,1516706351.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:11.532Z,1516706351.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:11.546Z,1516706351.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:11.936Z,1516706351.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:11.950Z,1516706351.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:12.328Z,1516706352.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:12.359Z,1516706352.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:12.712Z,1516706352.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:12.739Z,1516706352.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:13.112Z,1516706353.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:13.149Z,1516706353.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:13.510Z,1516706353.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:13.548Z,1516706353.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:13.914Z,1516706353.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:13.945Z,1516706353.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:14.313Z,1516706354.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:14.352Z,1516706354.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:14.728Z,1516706354.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:14.750Z,1516706354.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:15.132Z,1516706355.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:15.159Z,1516706355.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:15.533Z,1516706355.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:15.548Z,1516706355.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:15.921Z,1516706355.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:15.947Z,1516706355.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:16.312Z,1516706356.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:16.348Z,1516706356.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:16.713Z,1516706356.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:16.748Z,1516706356.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:17.116Z,1516706357.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:17.149Z,1516706357.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:17.532Z,1516706357.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:17.547Z,1516706357.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:17.936Z,1516706357.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:17.951Z,1516706357.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:18.327Z,1516706358.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:18.363Z,1516706358.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:18.712Z,1516706358.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:18.745Z,1516706358.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:19.112Z,1516706359.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:19.146Z,1516706359.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:19.516Z,1516706359.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:19.542Z,1516706359.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:19.913Z,1516706359.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:19.940Z,1516706359.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:20.316Z,1516706360.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:20.350Z,1516706360.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:20.723Z,1516706360.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:20.758Z,1516706360.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:21.136Z,1516706361.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:21.151Z,1516706361.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:21.522Z,1516706361.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:21.557Z,1516706361.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:21.912Z,1516706361.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:21.949Z,1516706361.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:22.312Z,1516706362.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:22.345Z,1516706362.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:22.713Z,1516706362.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:22.728Z,1516706362.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:23.112Z,1516706363.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:23.133Z,1516706363.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:23.531Z,1516706363.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:23.557Z,1516706363.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:23.949Z,1516706363.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:23.968Z,1516706363.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:24.327Z,1516706364.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:24.358Z,1516706364.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:24.719Z,1516706364.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:24.741Z,1516706364.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:25.120Z,1516706365.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:25.135Z,1516706365.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:25.517Z,1516706365.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:25.533Z,1516706365.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:25.925Z,1516706365.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:25.940Z,1516706365.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:26.321Z,1516706366.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:26.336Z,1516706366.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:26.724Z,1516706366.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:26.739Z,1516706366.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:27.127Z,1516706367.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:27.142Z,1516706367.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:27.523Z,1516706367.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:27.545Z,1516706367.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:27.921Z,1516706367.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:27.937Z,1516706367.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:28.320Z,1516706368.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:28.334Z,1516706368.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:28.721Z,1516706368.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:28.741Z,1516706368.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:29.121Z,1516706369.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:29.136Z,1516706369.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:29.523Z,1516706369.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:29.538Z,1516706369.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:29.927Z,1516706369.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:29.945Z,1516706369.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:30.324Z,1516706370.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:30.338Z,1516706370.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:30.718Z,1516706370.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:30.742Z,1516706370.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:31.121Z,1516706371.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:31.136Z,1516706371.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:31.516Z,1516706371.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:31.543Z,1516706371.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:31.920Z,1516706371.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:31.938Z,1516706371.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:32.321Z,1516706372.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:32.336Z,1516706372.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:32.726Z,1516706372.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:32.745Z,1516706372.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:33.131Z,1516706373.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:33.146Z,1516706373.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:33.526Z,1516706373.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:33.541Z,1516706373.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:33.920Z,1516706373.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:33.935Z,1516706373.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:34.320Z,1516706374.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:34.335Z,1516706374.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:34.722Z,1516706374.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:34.736Z,1516706374.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:35.121Z,1516706375.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:35.136Z,1516706375.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:35.526Z,1516706375.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:35.568Z,1516706375.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:35.931Z,1516706375.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:35.946Z,1516706375.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:36.327Z,1516706376.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:36.345Z,1516706376.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:36.721Z,1516706376.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:36.736Z,1516706376.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:37.122Z,1516706377.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:37.136Z,1516706377.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:37.516Z,1516706377.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:37.537Z,1516706377.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:37.920Z,1516706377.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:37.939Z,1516706377.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:38.322Z,1516706378.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:38.336Z,1516706378.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:38.727Z,1516706378.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:38.743Z,1516706378.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:39.127Z,1516706379.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:39.142Z,1516706379.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:39.527Z,1516706379.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:39.545Z,1516706379.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:39.922Z,1516706379.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:39.937Z,1516706379.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:40.321Z,1516706380.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:40.336Z,1516706380.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:40.724Z,1516706380.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:40.738Z,1516706380.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:41.121Z,1516706381.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:41.137Z,1516706381.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:41.526Z,1516706381.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:41.541Z,1516706381.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:41.926Z,1516706381.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:41.941Z,1516706381.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:42.326Z,1516706382.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:42.342Z,1516706382.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:42.726Z,1516706382.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:42.741Z,1516706382.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:43.122Z,1516706383.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:43.137Z,1516706383.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:43.516Z,1516706383.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:43.537Z,1516706383.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:43.920Z,1516706383.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:43.951Z,1516706383.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:44.322Z,1516706384.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:44.337Z,1516706384.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:44.733Z,1516706384.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:44.753Z,1516706384.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:45.134Z,1516706385.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:45.150Z,1516706385.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:45.533Z,1516706385.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:45.547Z,1516706385.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:45.920Z,1516706385.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:45.940Z,1516706385.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:46.315Z,1516706386.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:46.348Z,1516706386.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:46.722Z,1516706386.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:46.737Z,1516706386.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:47.116Z,1516706387.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:47.154Z,1516706387.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:47.534Z,1516706387.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:47.557Z,1516706387.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:47.936Z,1516706387.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:47.951Z,1516706387.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:48.331Z,1516706388.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:48.347Z,1516706388.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:48.712Z,1516706388.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:48.745Z,1516706388.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:49.125Z,1516706389.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:49.140Z,1516706389.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:49.524Z,1516706389.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:49.543Z,1516706389.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:49.913Z,1516706389.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:49.945Z,1516706389.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:50.312Z,1516706390.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:50.346Z,1516706390.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:50.728Z,1516706390.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:50.749Z,1516706390.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:51.135Z,1516706391.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:51.157Z,1516706391.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:51.536Z,1516706391.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:51.551Z,1516706391.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:51.924Z,1516706391.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:51.943Z,1516706391.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:52.329Z,1516706392.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:52.345Z,1516706392.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:52.714Z,1516706392.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:52.750Z,1516706392.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:53.111Z,1516706393.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:53.139Z,1516706393.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:53.528Z,1516706393.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:53.555Z,1516706393.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:53.937Z,1516706393.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:53.952Z,1516706393.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:54.328Z,1516706394.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:54.359Z,1516706394.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:54.712Z,1516706394.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:54.739Z,1516706394.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:55.112Z,1516706395.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:55.142Z,1516706395.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:55.511Z,1516706395.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:55.545Z,1516706395.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:55.930Z,1516706395.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:55.946Z,1516706395.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:59.032Z,1516706399.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:59.047Z,1516706399.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:59.156Z,1516706399.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:59.194Z,1516706399.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:59.511Z,1516706399.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:59.534Z,1516706399.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:19:59.908Z,1516706399.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:19:59.935Z,1516706399.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:00.290Z,1516706400.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:00.321Z,1516706400.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:00.700Z,1516706400.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:00.721Z,1516706400.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:01.097Z,1516706401.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:01.113Z,1516706401.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:01.501Z,1516706401.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:01.521Z,1516706401.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:01.907Z,1516706401.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:01.922Z,1516706401.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:02.302Z,1516706402.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:02.317Z,1516706402.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:02.696Z,1516706402.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:02.711Z,1516706402.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:03.096Z,1516706403.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:03.110Z,1516706403.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:03.492Z,1516706403.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:03.525Z,1516706403.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:03.901Z,1516706403.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:03.916Z,1516706403.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:04.292Z,1516706404.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:04.314Z,1516706404.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:04.707Z,1516706404.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:04.723Z,1516706404.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:05.105Z,1516706405.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:05.125Z,1516706405.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:05.506Z,1516706405.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:05.525Z,1516706405.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:05.901Z,1516706405.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:05.917Z,1516706405.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:06.292Z,1516706406.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:06.314Z,1516706406.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:06.693Z,1516706406.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:06.715Z,1516706406.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:07.097Z,1516706407.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:07.112Z,1516706407.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:07.506Z,1516706407.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:07.529Z,1516706407.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:07.905Z,1516706407.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:07.925Z,1516706407.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:08.307Z,1516706408.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:08.322Z,1516706408.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:08.696Z,1516706408.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:08.711Z,1516706408.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:09.092Z,1516706409.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:09.110Z,1516706409.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:09.497Z,1516706409.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:09.517Z,1516706409.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:09.893Z,1516706409.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:09.916Z,1516706409.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:10.291Z,1516706410.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:10.322Z,1516706410.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:10.708Z,1516706410.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:10.723Z,1516706410.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:11.110Z,1516706411.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:11.129Z,1516706411.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:11.523Z,1516706411.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:11.538Z,1516706411.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:11.898Z,1516706411.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:11.913Z,1516706411.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:12.291Z,1516706412.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:12.324Z,1516706412.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:12.695Z,1516706412.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:12.717Z,1516706412.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:13.092Z,1516706413.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:13.129Z,1516706413.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:13.511Z,1516706413.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:13.526Z,1516706413.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:13.910Z,1516706413.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:13.929Z,1516706413.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:14.313Z,1516706414.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:14.328Z,1516706414.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:14.689Z,1516706414.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:14.716Z,1516706414.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:15.089Z,1516706415.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:15.125Z,1516706415.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:15.493Z,1516706415.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:15.522Z,1516706415.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:15.890Z,1516706415.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:15.921Z,1516706415.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:16.293Z,1516706416.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:16.326Z,1516706416.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:16.700Z,1516706416.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:16.735Z,1516706416.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:16.735Z,1516706416.735 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161 2018-01-23T11:20:16.735Z,1516706416.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:20:16.737Z,1516706416.737 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:16.737Z,1516706416.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 161 2018-01-23T11:20:16.737Z,1516706416.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:20:16.743Z,1516706416.743 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:16.743Z,1516706416.743 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161 2018-01-23T11:20:16.743Z,1516706416.743 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:20:16.768Z,1516706416.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:20:16.768Z,1516706416.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:20:16.768Z,1516706416.768 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:20:17.115Z,1516706417.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:17.155Z,1516706417.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:20:17.155Z,1516706417.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161 2018-01-23T11:20:17.156Z,1516706417.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:20:17.156Z,1516706417.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 161 2018-01-23T11:20:17.156Z,1516706417.156 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:20:17.156Z,1516706417.156 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161 2018-01-23T11:20:17.506Z,1516706417.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:17.520Z,1516706417.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:20:17.521Z,1516706417.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:20:17.521Z,1516706417.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:20:17.521Z,1516706417.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:20:17.522Z,1516706417.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:20:17.522Z,1516706417.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:20:17.522Z,1516706417.522 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:20:17.523Z,1516706417.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:20:17.523Z,1516706417.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:20:17.888Z,1516706417.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:17.929Z,1516706417.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:20:17.930Z,1516706417.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:18.288Z,1516706418.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:18.324Z,1516706418.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:20:18.325Z,1516706418.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:18.689Z,1516706418.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:18.717Z,1516706418.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:20:18.718Z,1516706418.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:19.089Z,1516706419.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:19.128Z,1516706419.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:20:19.129Z,1516706419.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:19.499Z,1516706419.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:19.526Z,1516706419.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:20:19.527Z,1516706419.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:19.911Z,1516706419.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:19.930Z,1516706419.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:20:19.931Z,1516706419.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:20.300Z,1516706420.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:20.335Z,1516706420.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:20:20.336Z,1516706420.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:20.690Z,1516706420.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:20.721Z,1516706420.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:20:20.722Z,1516706420.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:21.088Z,1516706421.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:21.124Z,1516706421.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:20:21.125Z,1516706421.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:21.500Z,1516706421.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:21.534Z,1516706421.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:20:21.535Z,1516706421.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:21.904Z,1516706421.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:21.930Z,1516706421.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:20:21.931Z,1516706421.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:22.299Z,1516706422.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:22.329Z,1516706422.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:20:22.330Z,1516706422.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:22.697Z,1516706422.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:22.712Z,1516706422.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:20:22.713Z,1516706422.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:23.094Z,1516706423.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:23.116Z,1516706423.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:20:23.117Z,1516706423.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:23.503Z,1516706423.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:23.519Z,1516706423.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:20:23.520Z,1516706423.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:23.903Z,1516706423.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:23.917Z,1516706423.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:20:23.918Z,1516706423.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:24.302Z,1516706424.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:24.317Z,1516706424.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:20:24.318Z,1516706424.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:24.696Z,1516706424.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:24.715Z,1516706424.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:20:24.716Z,1516706424.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:25.097Z,1516706425.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:25.111Z,1516706425.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:20:25.112Z,1516706425.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:25.502Z,1516706425.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:25.520Z,1516706425.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:20:25.521Z,1516706425.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:25.903Z,1516706425.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:25.918Z,1516706425.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:20:25.919Z,1516706425.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:26.315Z,1516706426.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:26.330Z,1516706426.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:20:26.356Z,1516706426.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:26.700Z,1516706426.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:26.720Z,1516706426.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:20:26.721Z,1516706426.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:27.101Z,1516706427.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:27.115Z,1516706427.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:20:27.116Z,1516706427.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:27.503Z,1516706427.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:27.517Z,1516706427.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:20:27.518Z,1516706427.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:27.915Z,1516706427.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:27.930Z,1516706427.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:20:27.951Z,1516706427.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:28.306Z,1516706428.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:28.321Z,1516706428.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:20:28.322Z,1516706428.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:28.699Z,1516706428.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:28.713Z,1516706428.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:20:28.714Z,1516706428.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:29.096Z,1516706429.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:29.111Z,1516706429.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:20:29.112Z,1516706429.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:29.507Z,1516706429.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:29.522Z,1516706429.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:20:29.523Z,1516706429.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:29.907Z,1516706429.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:29.921Z,1516706429.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:20:29.922Z,1516706429.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:30.306Z,1516706430.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:30.321Z,1516706430.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:20:30.322Z,1516706430.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:30.693Z,1516706430.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:30.720Z,1516706430.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:20:30.721Z,1516706430.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:31.093Z,1516706431.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:31.120Z,1516706431.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:20:31.121Z,1516706431.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:31.508Z,1516706431.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:31.523Z,1516706431.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:20:31.524Z,1516706431.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:31.912Z,1516706431.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:31.926Z,1516706431.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:20:31.927Z,1516706431.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:32.307Z,1516706432.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:32.322Z,1516706432.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:20:32.323Z,1516706432.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:32.707Z,1516706432.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:32.722Z,1516706432.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:20:32.723Z,1516706432.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:33.109Z,1516706433.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:33.128Z,1516706433.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:20:33.129Z,1516706433.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:33.506Z,1516706433.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:33.522Z,1516706433.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:20:33.523Z,1516706433.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:33.911Z,1516706433.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:33.932Z,1516706433.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:20:33.933Z,1516706433.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:34.315Z,1516706434.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:34.336Z,1516706434.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:20:34.337Z,1516706434.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:34.706Z,1516706434.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:34.721Z,1516706434.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:20:34.722Z,1516706434.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:35.092Z,1516706435.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:35.118Z,1516706435.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:20:35.119Z,1516706435.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:35.507Z,1516706435.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:35.522Z,1516706435.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:20:35.523Z,1516706435.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:35.912Z,1516706435.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:35.932Z,1516706435.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:20:35.933Z,1516706435.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:36.315Z,1516706436.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:36.329Z,1516706436.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:20:36.331Z,1516706436.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:36.706Z,1516706436.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:36.720Z,1516706436.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:20:36.721Z,1516706436.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:37.088Z,1516706437.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:37.124Z,1516706437.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:37.515Z,1516706437.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:37.530Z,1516706437.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:37.918Z,1516706437.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:37.937Z,1516706437.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:38.307Z,1516706438.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:38.321Z,1516706438.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:38.689Z,1516706438.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:38.715Z,1516706438.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:39.090Z,1516706439.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:39.125Z,1516706439.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:39.516Z,1516706439.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:39.531Z,1516706439.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:39.917Z,1516706439.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:39.937Z,1516706439.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:40.307Z,1516706440.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:40.322Z,1516706440.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:40.691Z,1516706440.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:40.721Z,1516706440.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:41.104Z,1516706441.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:41.122Z,1516706441.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:41.515Z,1516706441.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:41.529Z,1516706441.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:41.911Z,1516706441.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:41.932Z,1516706441.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:42.309Z,1516706442.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:42.324Z,1516706442.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:42.692Z,1516706442.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:42.718Z,1516706442.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:43.091Z,1516706443.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:43.127Z,1516706443.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:43.511Z,1516706443.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:43.533Z,1516706443.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:43.912Z,1516706443.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:43.927Z,1516706443.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:44.309Z,1516706444.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:44.324Z,1516706444.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:44.709Z,1516706444.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:44.724Z,1516706444.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:45.088Z,1516706445.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:45.135Z,1516706445.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:45.513Z,1516706445.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:45.528Z,1516706445.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:45.911Z,1516706445.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:45.926Z,1516706445.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:46.311Z,1516706446.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:46.326Z,1516706446.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:46.693Z,1516706446.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:46.726Z,1516706446.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:47.094Z,1516706447.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:47.122Z,1516706447.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:47.500Z,1516706447.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:47.533Z,1516706447.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:47.912Z,1516706447.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:47.927Z,1516706447.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:48.315Z,1516706448.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:48.330Z,1516706448.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:48.690Z,1516706448.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:48.720Z,1516706448.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:49.091Z,1516706449.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:49.105Z,1516706449.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:49.503Z,1516706449.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:49.529Z,1516706449.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:49.923Z,1516706449.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:49.938Z,1516706449.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:50.300Z,1516706450.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:50.334Z,1516706450.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:50.700Z,1516706450.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:50.731Z,1516706450.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:51.097Z,1516706451.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:51.133Z,1516706451.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:51.511Z,1516706451.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:51.537Z,1516706451.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:51.905Z,1516706451.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:51.920Z,1516706451.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:52.306Z,1516706452.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:52.329Z,1516706452.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:52.702Z,1516706452.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:52.717Z,1516706452.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:53.100Z,1516706453.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:53.115Z,1516706453.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:53.506Z,1516706453.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:53.521Z,1516706453.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:53.905Z,1516706453.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:53.920Z,1516706453.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:54.304Z,1516706454.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:54.319Z,1516706454.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:54.694Z,1516706454.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:54.721Z,1516706454.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:55.105Z,1516706455.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:55.121Z,1516706455.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:55.492Z,1516706455.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:55.518Z,1516706455.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:55.909Z,1516706455.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:55.925Z,1516706455.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:56.308Z,1516706456.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:56.328Z,1516706456.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:59.404Z,1516706459.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:59.420Z,1516706459.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:59.518Z,1516706459.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:59.533Z,1516706459.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:20:59.866Z,1516706459.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:20:59.916Z,1516706459.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:00.269Z,1516706460.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:00.284Z,1516706460.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:00.666Z,1516706460.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:00.685Z,1516706460.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:01.068Z,1516706461.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:01.087Z,1516706461.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:01.468Z,1516706461.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:01.488Z,1516706461.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:01.874Z,1516706461.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:01.889Z,1516706461.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:02.275Z,1516706462.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:02.292Z,1516706462.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:02.674Z,1516706462.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:02.693Z,1516706462.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:03.068Z,1516706463.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:03.083Z,1516706463.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:03.472Z,1516706463.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:03.487Z,1516706463.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:03.871Z,1516706463.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:03.893Z,1516706463.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:04.271Z,1516706464.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:04.289Z,1516706464.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:04.674Z,1516706464.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:04.689Z,1516706464.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:05.075Z,1516706465.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:05.090Z,1516706465.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:05.474Z,1516706465.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:05.489Z,1516706465.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:05.865Z,1516706465.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:05.888Z,1516706465.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:06.270Z,1516706466.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:06.285Z,1516706466.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:06.669Z,1516706466.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:06.684Z,1516706466.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:07.065Z,1516706467.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:07.088Z,1516706467.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:07.470Z,1516706467.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:07.485Z,1516706467.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:07.875Z,1516706467.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:07.890Z,1516706467.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:08.276Z,1516706468.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:08.291Z,1516706468.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:08.675Z,1516706468.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:08.696Z,1516706468.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:09.070Z,1516706469.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:09.086Z,1516706469.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:09.468Z,1516706469.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:09.483Z,1516706469.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:09.874Z,1516706469.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:09.889Z,1516706469.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:10.268Z,1516706470.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:10.283Z,1516706470.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:10.672Z,1516706470.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:10.708Z,1516706470.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:11.079Z,1516706471.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:11.094Z,1516706471.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:11.478Z,1516706471.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:11.501Z,1516706471.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:11.865Z,1516706471.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:11.886Z,1516706471.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:12.269Z,1516706472.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:12.288Z,1516706472.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:12.673Z,1516706472.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:12.693Z,1516706472.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:13.068Z,1516706473.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:13.087Z,1516706473.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:13.470Z,1516706473.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:13.492Z,1516706473.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:13.879Z,1516706473.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:13.894Z,1516706473.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:14.282Z,1516706474.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:14.305Z,1516706474.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:14.684Z,1516706474.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:14.698Z,1516706474.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:15.061Z,1516706475.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:15.087Z,1516706475.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:15.460Z,1516706475.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:15.495Z,1516706475.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:15.861Z,1516706475.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:15.888Z,1516706475.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:16.261Z,1516706476.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:16.287Z,1516706476.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:16.676Z,1516706476.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:16.703Z,1516706476.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:17.083Z,1516706477.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:17.098Z,1516706477.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:17.480Z,1516706477.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:17.494Z,1516706477.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:17.860Z,1516706477.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:17.893Z,1516706477.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:18.260Z,1516706478.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:18.296Z,1516706478.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:18.665Z,1516706478.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:18.691Z,1516706478.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:19.077Z,1516706479.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:19.092Z,1516706479.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:19.460Z,1516706479.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:19.494Z,1516706479.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:19.876Z,1516706479.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:19.898Z,1516706479.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:20.280Z,1516706480.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:20.301Z,1516706480.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:20.679Z,1516706480.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:20.705Z,1516706480.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:21.061Z,1516706481.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:21.093Z,1516706481.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:21.460Z,1516706481.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:21.493Z,1516706481.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:21.861Z,1516706481.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:21.897Z,1516706481.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:22.265Z,1516706482.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:22.290Z,1516706482.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:22.679Z,1516706482.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:22.694Z,1516706482.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:23.083Z,1516706483.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:23.098Z,1516706483.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:23.479Z,1516706483.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:23.494Z,1516706483.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:23.860Z,1516706483.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:23.897Z,1516706483.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:24.261Z,1516706484.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:24.294Z,1516706484.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:24.669Z,1516706484.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:24.695Z,1516706484.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:25.061Z,1516706485.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:25.096Z,1516706485.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:25.460Z,1516706485.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:25.497Z,1516706485.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:25.880Z,1516706485.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:25.895Z,1516706485.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:26.281Z,1516706486.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:26.308Z,1516706486.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:26.679Z,1516706486.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:26.705Z,1516706486.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:27.069Z,1516706487.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:27.102Z,1516706487.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:27.468Z,1516706487.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:27.503Z,1516706487.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:27.867Z,1516706487.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:27.903Z,1516706487.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:28.269Z,1516706488.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:28.303Z,1516706488.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:28.679Z,1516706488.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:28.709Z,1516706488.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:29.079Z,1516706489.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:29.105Z,1516706489.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:29.479Z,1516706489.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:29.509Z,1516706489.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:29.869Z,1516706489.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:29.903Z,1516706489.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:30.275Z,1516706490.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:30.307Z,1516706490.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:30.662Z,1516706490.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:30.678Z,1516706490.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:31.069Z,1516706491.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:31.084Z,1516706491.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:31.469Z,1516706491.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:31.484Z,1516706491.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:31.883Z,1516706491.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:31.915Z,1516706491.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:32.283Z,1516706492.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:32.314Z,1516706492.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:32.672Z,1516706492.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:32.687Z,1516706492.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:33.067Z,1516706493.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:33.090Z,1516706493.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:33.469Z,1516706493.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:33.489Z,1516706493.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:33.871Z,1516706493.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:33.886Z,1516706493.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:34.269Z,1516706494.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:34.284Z,1516706494.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:34.688Z,1516706494.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:34.719Z,1516706494.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:35.079Z,1516706495.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:35.094Z,1516706495.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:35.476Z,1516706495.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:35.500Z,1516706495.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:35.869Z,1516706495.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:35.889Z,1516706495.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:36.270Z,1516706496.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:36.285Z,1516706496.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:36.664Z,1516706496.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:36.688Z,1516706496.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:37.063Z,1516706497.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:37.100Z,1516706497.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:37.469Z,1516706497.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:37.492Z,1516706497.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:37.880Z,1516706497.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:37.895Z,1516706497.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:38.280Z,1516706498.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:38.307Z,1516706498.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:38.684Z,1516706498.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:38.699Z,1516706498.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:39.061Z,1516706499.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:39.093Z,1516706499.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:39.460Z,1516706499.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:39.493Z,1516706499.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:39.861Z,1516706499.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:39.910Z,1516706499.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:40.258Z,1516706500.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:40.286Z,1516706500.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:40.680Z,1516706500.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:40.695Z,1516706500.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:41.084Z,1516706501.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:41.101Z,1516706501.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:41.476Z,1516706501.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:41.498Z,1516706501.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:41.861Z,1516706501.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:41.893Z,1516706501.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:42.261Z,1516706502.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:42.299Z,1516706502.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:42.661Z,1516706502.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:42.697Z,1516706502.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:43.061Z,1516706503.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:43.077Z,1516706503.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:43.469Z,1516706503.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:43.483Z,1516706503.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:43.879Z,1516706503.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:43.904Z,1516706503.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:44.294Z,1516706504.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:44.309Z,1516706504.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:44.679Z,1516706504.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:44.705Z,1516706504.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:45.066Z,1516706505.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:45.081Z,1516706505.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:45.473Z,1516706505.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:45.488Z,1516706505.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:45.871Z,1516706505.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:45.885Z,1516706505.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:46.264Z,1516706506.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:46.290Z,1516706506.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:46.680Z,1516706506.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:46.707Z,1516706506.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:47.076Z,1516706507.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:47.090Z,1516706507.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:47.472Z,1516706507.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:47.487Z,1516706507.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:47.866Z,1516706507.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:47.889Z,1516706507.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:48.269Z,1516706508.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:48.284Z,1516706508.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:48.664Z,1516706508.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:48.691Z,1516706508.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:49.072Z,1516706509.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:49.093Z,1516706509.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:49.469Z,1516706509.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:49.484Z,1516706509.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:49.874Z,1516706509.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:49.897Z,1516706509.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:50.275Z,1516706510.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:50.290Z,1516706510.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:50.674Z,1516706510.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:50.697Z,1516706510.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:51.072Z,1516706511.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:51.093Z,1516706511.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:51.472Z,1516706511.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:51.493Z,1516706511.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:51.870Z,1516706511.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:51.885Z,1516706511.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:52.264Z,1516706512.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:52.284Z,1516706512.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:52.674Z,1516706512.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:52.701Z,1516706512.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:53.082Z,1516706513.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:53.097Z,1516706513.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:53.479Z,1516706513.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:53.494Z,1516706513.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:53.864Z,1516706513.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:53.893Z,1516706513.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:54.269Z,1516706514.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:54.284Z,1516706514.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:54.664Z,1516706514.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:54.693Z,1516706514.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:55.073Z,1516706515.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:55.088Z,1516706515.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:55.459Z,1516706515.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:55.494Z,1516706515.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:55.497Z,1516706515.497 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:21:55.497Z,1516706515.497 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:21:55.497Z,1516706515.497 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:21:55.497Z,1516706515.497 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:21:55.880Z,1516706515.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:55.895Z,1516706515.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:55.898Z,1516706515.898 [Default:CheckIn:D] Stopped 2018-01-23T11:21:55.898Z,1516706515.898 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:21:56.282Z,1516706516.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:56.297Z,1516706516.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:56.301Z,1516706516.301 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 484.063965 min 2018-01-23T11:21:56.301Z,1516706516.301 [Default:CheckIn:E] Stopped 2018-01-23T11:21:56.301Z,1516706516.301 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:21:56.301Z,1516706516.301 [Default:CheckIn] Stopped 2018-01-23T11:21:56.301Z,1516706516.301 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:21:56.302Z,1516706516.302 [Default:CheckIn](INFO): Running loop #48 2018-01-23T11:21:56.302Z,1516706516.302 [Default:CheckIn] Running Loop=48 2018-01-23T11:21:56.302Z,1516706516.302 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:21:56.302Z,1516706516.302 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:21:56.692Z,1516706516.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:56.707Z,1516706516.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:59.758Z,1516706519.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:59.783Z,1516706519.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:21:59.888Z,1516706519.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:21:59.936Z,1516706519.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:00.242Z,1516706520.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:00.261Z,1516706520.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:00.647Z,1516706520.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:00.662Z,1516706520.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:01.042Z,1516706521.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:01.061Z,1516706521.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:01.437Z,1516706521.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:01.452Z,1516706521.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:01.835Z,1516706521.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:01.850Z,1516706521.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:02.237Z,1516706522.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:02.252Z,1516706522.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:02.642Z,1516706522.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:02.657Z,1516706522.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:03.044Z,1516706523.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:03.058Z,1516706523.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:03.442Z,1516706523.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:03.457Z,1516706523.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:03.832Z,1516706523.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:03.851Z,1516706523.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:04.236Z,1516706524.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:04.250Z,1516706524.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:04.643Z,1516706524.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:04.658Z,1516706524.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:05.042Z,1516706525.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:05.065Z,1516706525.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:05.443Z,1516706525.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:05.457Z,1516706525.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:05.828Z,1516706525.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:05.863Z,1516706525.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:06.237Z,1516706526.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:06.256Z,1516706526.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:06.643Z,1516706526.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:06.658Z,1516706526.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:07.042Z,1516706527.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:07.058Z,1516706527.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:07.442Z,1516706527.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:07.465Z,1516706527.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:07.838Z,1516706527.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:07.854Z,1516706527.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:08.228Z,1516706528.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:08.249Z,1516706528.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:08.638Z,1516706528.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:08.662Z,1516706528.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:09.047Z,1516706529.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:09.061Z,1516706529.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:09.442Z,1516706529.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:09.457Z,1516706529.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:09.830Z,1516706529.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:09.857Z,1516706529.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:10.238Z,1516706530.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:10.253Z,1516706530.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:10.640Z,1516706530.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:10.667Z,1516706530.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:11.051Z,1516706531.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:11.066Z,1516706531.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:11.445Z,1516706531.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:11.460Z,1516706531.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:11.825Z,1516706531.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:11.865Z,1516706531.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:12.223Z,1516706532.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:12.257Z,1516706532.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:12.646Z,1516706532.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:12.661Z,1516706532.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:13.047Z,1516706533.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:13.062Z,1516706533.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:13.439Z,1516706533.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:13.476Z,1516706533.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:13.825Z,1516706533.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:13.859Z,1516706533.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:14.228Z,1516706534.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:14.255Z,1516706534.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:14.643Z,1516706534.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:14.659Z,1516706534.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:15.047Z,1516706535.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:15.063Z,1516706535.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:15.439Z,1516706535.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:15.461Z,1516706535.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:15.825Z,1516706535.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:15.856Z,1516706535.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:16.223Z,1516706536.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:16.262Z,1516706536.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:16.641Z,1516706536.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:16.672Z,1516706536.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:17.047Z,1516706537.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:17.062Z,1516706537.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:17.434Z,1516706537.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:17.469Z,1516706537.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:17.822Z,1516706537.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:17.837Z,1516706537.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:18.225Z,1516706538.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:18.240Z,1516706538.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:18.625Z,1516706538.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:18.640Z,1516706538.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:19.043Z,1516706539.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:19.066Z,1516706539.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:19.447Z,1516706539.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:19.477Z,1516706539.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:19.859Z,1516706539.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:19.881Z,1516706539.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:20.225Z,1516706540.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:20.245Z,1516706540.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:20.637Z,1516706540.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:20.673Z,1516706540.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:21.034Z,1516706541.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:21.049Z,1516706541.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:21.428Z,1516706541.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:21.455Z,1516706541.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:21.835Z,1516706541.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:21.851Z,1516706541.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:22.239Z,1516706542.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:22.254Z,1516706542.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:22.636Z,1516706542.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:22.682Z,1516706542.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:23.028Z,1516706543.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:23.051Z,1516706543.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:23.433Z,1516706543.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:23.448Z,1516706543.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:23.832Z,1516706543.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:23.847Z,1516706543.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:24.229Z,1516706544.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:24.256Z,1516706544.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:24.630Z,1516706544.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:24.656Z,1516706544.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:25.042Z,1516706545.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:25.061Z,1516706545.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:25.443Z,1516706545.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:25.458Z,1516706545.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:25.843Z,1516706545.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:25.864Z,1516706545.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:26.229Z,1516706546.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:26.248Z,1516706546.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:26.628Z,1516706546.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:26.650Z,1516706546.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:27.034Z,1516706547.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:27.049Z,1516706547.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:27.428Z,1516706547.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:27.450Z,1516706547.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:27.842Z,1516706547.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:27.857Z,1516706547.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:28.242Z,1516706548.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:28.257Z,1516706548.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:28.641Z,1516706548.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:28.673Z,1516706548.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:29.036Z,1516706549.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:29.051Z,1516706549.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:29.434Z,1516706549.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:29.456Z,1516706549.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:29.832Z,1516706549.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:29.850Z,1516706549.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:30.229Z,1516706550.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:30.251Z,1516706550.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:30.634Z,1516706550.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:30.656Z,1516706550.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:31.043Z,1516706551.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:31.058Z,1516706551.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:31.446Z,1516706551.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:31.461Z,1516706551.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:31.843Z,1516706551.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:31.858Z,1516706551.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:32.228Z,1516706552.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:32.250Z,1516706552.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:32.627Z,1516706552.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:32.659Z,1516706552.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:33.034Z,1516706553.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:33.048Z,1516706553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:33.428Z,1516706553.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:33.450Z,1516706553.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:33.842Z,1516706553.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:33.857Z,1516706553.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:34.246Z,1516706554.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:34.268Z,1516706554.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:34.642Z,1516706554.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:34.657Z,1516706554.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:35.027Z,1516706555.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:35.050Z,1516706555.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:35.434Z,1516706555.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:35.456Z,1516706555.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:35.837Z,1516706555.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:35.857Z,1516706555.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:36.231Z,1516706556.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:36.251Z,1516706556.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:36.631Z,1516706556.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:36.657Z,1516706556.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:37.043Z,1516706557.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:37.058Z,1516706557.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:37.446Z,1516706557.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:37.469Z,1516706557.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:37.847Z,1516706557.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:37.868Z,1516706557.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:38.222Z,1516706558.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:38.248Z,1516706558.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:38.628Z,1516706558.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:38.659Z,1516706558.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:39.034Z,1516706559.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:39.052Z,1516706559.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:39.422Z,1516706559.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:39.453Z,1516706559.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:39.844Z,1516706559.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:39.859Z,1516706559.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:40.248Z,1516706560.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:40.262Z,1516706560.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:40.640Z,1516706560.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:40.665Z,1516706560.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:41.024Z,1516706561.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:41.051Z,1516706561.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:41.425Z,1516706561.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:41.458Z,1516706561.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:41.829Z,1516706561.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:41.857Z,1516706561.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:42.226Z,1516706562.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:42.264Z,1516706562.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:42.629Z,1516706562.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:42.662Z,1516706562.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:43.035Z,1516706563.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:43.072Z,1516706563.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:43.443Z,1516706563.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:43.466Z,1516706563.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:43.836Z,1516706563.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:43.872Z,1516706563.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:44.222Z,1516706564.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:44.238Z,1516706564.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:44.624Z,1516706564.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:44.661Z,1516706564.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:45.029Z,1516706565.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:45.044Z,1516706565.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:45.422Z,1516706565.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:45.437Z,1516706565.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:45.847Z,1516706565.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:45.881Z,1516706565.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:46.243Z,1516706566.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:46.272Z,1516706566.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:46.639Z,1516706566.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:46.666Z,1516706566.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:47.032Z,1516706567.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:47.053Z,1516706567.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:47.436Z,1516706567.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:47.451Z,1516706567.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:47.830Z,1516706567.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:47.853Z,1516706567.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:48.234Z,1516706568.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:48.249Z,1516706568.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:48.634Z,1516706568.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:48.649Z,1516706568.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:49.035Z,1516706569.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:49.051Z,1516706569.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:49.439Z,1516706569.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:49.454Z,1516706569.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:49.836Z,1516706569.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:49.851Z,1516706569.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:50.233Z,1516706570.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:50.253Z,1516706570.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:50.634Z,1516706570.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:50.650Z,1516706570.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:51.033Z,1516706571.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:51.048Z,1516706571.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:51.432Z,1516706571.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:51.453Z,1516706571.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:51.837Z,1516706571.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:51.853Z,1516706571.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:52.239Z,1516706572.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:52.254Z,1516706572.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:52.637Z,1516706572.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:52.657Z,1516706572.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:53.032Z,1516706573.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:53.053Z,1516706573.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:53.437Z,1516706573.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:53.451Z,1516706573.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:53.832Z,1516706573.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:53.847Z,1516706573.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:54.232Z,1516706574.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:54.250Z,1516706574.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:54.633Z,1516706574.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:54.648Z,1516706574.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:55.038Z,1516706575.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:55.060Z,1516706575.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:55.443Z,1516706575.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:55.458Z,1516706575.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:55.839Z,1516706575.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:55.854Z,1516706575.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:56.229Z,1516706576.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:56.248Z,1516706576.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:56.632Z,1516706576.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:56.647Z,1516706576.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:22:57.035Z,1516706577.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:22:57.050Z,1516706577.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:00.127Z,1516706580.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:00.142Z,1516706580.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:00.256Z,1516706580.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:00.293Z,1516706580.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:00.599Z,1516706580.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:00.614Z,1516706580.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:01.010Z,1516706581.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:01.045Z,1516706581.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:01.389Z,1516706581.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:01.408Z,1516706581.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:01.788Z,1516706581.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:01.815Z,1516706581.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:02.195Z,1516706582.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:02.210Z,1516706582.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:02.588Z,1516706582.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:02.608Z,1516706582.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:02.999Z,1516706582.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:03.014Z,1516706583.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:03.399Z,1516706583.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:03.414Z,1516706583.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:03.798Z,1516706583.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:03.813Z,1516706583.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:04.192Z,1516706584.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:04.221Z,1516706584.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:04.598Z,1516706584.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:04.613Z,1516706584.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:04.998Z,1516706584.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:05.013Z,1516706585.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:05.393Z,1516706585.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:05.413Z,1516706585.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:05.803Z,1516706585.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:05.818Z,1516706585.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:06.202Z,1516706586.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:06.217Z,1516706586.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:06.602Z,1516706586.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:06.625Z,1516706586.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:06.994Z,1516706586.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:07.009Z,1516706587.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:07.388Z,1516706587.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:07.409Z,1516706587.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:07.792Z,1516706587.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:07.811Z,1516706587.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:08.194Z,1516706588.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:08.209Z,1516706588.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:08.588Z,1516706588.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:08.609Z,1516706588.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:08.998Z,1516706588.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:09.025Z,1516706589.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:09.407Z,1516706589.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:09.421Z,1516706589.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:09.807Z,1516706589.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:09.822Z,1516706589.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:10.188Z,1516706590.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:10.211Z,1516706590.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:10.591Z,1516706590.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:10.619Z,1516706590.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:10.992Z,1516706590.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:11.012Z,1516706591.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:11.388Z,1516706591.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:11.417Z,1516706591.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:11.808Z,1516706591.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:11.828Z,1516706591.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:12.210Z,1516706592.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:12.225Z,1516706592.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:12.604Z,1516706592.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:12.619Z,1516706592.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:12.985Z,1516706592.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:13.021Z,1516706593.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:13.382Z,1516706593.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:13.414Z,1516706593.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:13.784Z,1516706593.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:13.811Z,1516706593.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:14.185Z,1516706594.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:14.225Z,1516706594.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:14.582Z,1516706594.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:14.609Z,1516706594.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:15.004Z,1516706595.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:15.023Z,1516706595.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:15.407Z,1516706595.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:15.429Z,1516706595.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:15.804Z,1516706595.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:15.824Z,1516706595.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:16.192Z,1516706596.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:16.219Z,1516706596.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:16.585Z,1516706596.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:16.619Z,1516706596.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:16.990Z,1516706596.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:17.018Z,1516706597.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:17.385Z,1516706597.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:17.415Z,1516706597.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:17.796Z,1516706597.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:17.831Z,1516706597.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:17.831Z,1516706597.831 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162 2018-01-23T11:23:17.831Z,1516706597.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:23:17.833Z,1516706597.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:17.833Z,1516706597.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 162 2018-01-23T11:23:17.833Z,1516706597.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:23:17.834Z,1516706597.834 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:17.835Z,1516706597.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162 2018-01-23T11:23:17.835Z,1516706597.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:23:17.846Z,1516706597.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:23:17.846Z,1516706597.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:23:17.864Z,1516706597.864 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:23:18.204Z,1516706598.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:18.256Z,1516706598.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:23:18.256Z,1516706598.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162 2018-01-23T11:23:18.257Z,1516706598.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:23:18.257Z,1516706598.257 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 162 2018-01-23T11:23:18.257Z,1516706598.257 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:23:18.257Z,1516706598.257 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162 2018-01-23T11:23:18.596Z,1516706598.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:18.622Z,1516706598.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:23:18.622Z,1516706598.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:23:18.622Z,1516706598.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:23:18.623Z,1516706598.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:23:18.623Z,1516706598.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:23:18.624Z,1516706598.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:23:18.624Z,1516706598.624 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:23:18.625Z,1516706598.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:23:18.625Z,1516706598.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:23:18.985Z,1516706598.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:19.028Z,1516706599.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:23:19.029Z,1516706599.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:19.394Z,1516706599.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:19.410Z,1516706599.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:23:19.411Z,1516706599.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:19.792Z,1516706599.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:19.807Z,1516706599.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:23:19.808Z,1516706599.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:20.194Z,1516706600.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:20.208Z,1516706600.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:23:20.209Z,1516706600.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:20.593Z,1516706600.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:20.608Z,1516706600.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:23:20.609Z,1516706600.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:20.999Z,1516706600.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:21.014Z,1516706601.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:23:21.016Z,1516706601.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:21.399Z,1516706601.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:21.413Z,1516706601.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:23:21.414Z,1516706601.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:21.800Z,1516706601.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:21.814Z,1516706601.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:23:21.815Z,1516706601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:22.189Z,1516706602.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:22.210Z,1516706602.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:23:22.211Z,1516706602.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:22.593Z,1516706602.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:22.618Z,1516706602.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:23:22.619Z,1516706602.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:22.990Z,1516706602.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:23.009Z,1516706603.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:23:23.010Z,1516706603.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:23.389Z,1516706603.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:23.412Z,1516706603.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:23:23.413Z,1516706603.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:23.803Z,1516706603.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:23.818Z,1516706603.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:23:23.819Z,1516706603.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:24.203Z,1516706604.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:24.218Z,1516706604.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:23:24.219Z,1516706604.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:24.604Z,1516706604.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:24.618Z,1516706604.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:23:24.619Z,1516706604.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:24.994Z,1516706604.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:25.009Z,1516706605.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:23:25.010Z,1516706605.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:25.388Z,1516706605.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:25.409Z,1516706605.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:23:25.410Z,1516706605.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:25.793Z,1516706605.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:25.813Z,1516706605.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:23:25.814Z,1516706605.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:26.194Z,1516706606.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:26.209Z,1516706606.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:23:26.210Z,1516706606.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:26.592Z,1516706606.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:26.606Z,1516706606.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:23:26.607Z,1516706606.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:27.002Z,1516706607.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:27.017Z,1516706607.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:23:27.018Z,1516706607.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:27.403Z,1516706607.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:27.417Z,1516706607.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:23:27.418Z,1516706607.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:27.802Z,1516706607.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:27.817Z,1516706607.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:23:27.818Z,1516706607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:28.188Z,1516706608.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:28.210Z,1516706608.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:23:28.211Z,1516706608.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:28.593Z,1516706608.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:28.608Z,1516706608.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:23:28.609Z,1516706608.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:28.998Z,1516706608.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:29.013Z,1516706609.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:23:29.014Z,1516706609.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:29.393Z,1516706609.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:29.407Z,1516706609.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:23:29.408Z,1516706609.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:29.803Z,1516706609.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:29.818Z,1516706609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:23:29.819Z,1516706609.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:30.202Z,1516706610.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:30.217Z,1516706610.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:23:30.218Z,1516706610.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:30.603Z,1516706610.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:30.617Z,1516706610.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:23:30.618Z,1516706610.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:30.995Z,1516706610.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:31.009Z,1516706611.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:23:31.010Z,1516706611.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:31.388Z,1516706611.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:31.409Z,1516706611.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:23:31.410Z,1516706611.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:31.803Z,1516706611.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:31.818Z,1516706611.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:23:31.819Z,1516706611.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:32.203Z,1516706612.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:32.217Z,1516706612.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:23:32.218Z,1516706612.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:32.600Z,1516706612.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:32.627Z,1516706612.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:23:32.628Z,1516706612.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:32.998Z,1516706612.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:33.013Z,1516706613.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:23:33.014Z,1516706613.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:33.395Z,1516706613.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:33.412Z,1516706613.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:23:33.413Z,1516706613.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:33.804Z,1516706613.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:33.819Z,1516706613.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:23:33.820Z,1516706613.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:34.208Z,1516706614.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:34.223Z,1516706614.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:23:34.224Z,1516706614.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:34.605Z,1516706614.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:34.624Z,1516706614.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:23:34.625Z,1516706614.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:34.992Z,1516706614.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:35.013Z,1516706615.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:23:35.013Z,1516706615.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:35.387Z,1516706615.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:35.420Z,1516706615.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:23:35.421Z,1516706615.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:35.804Z,1516706615.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:35.824Z,1516706615.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:23:35.825Z,1516706615.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:36.206Z,1516706616.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:36.228Z,1516706616.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:23:36.229Z,1516706616.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:36.604Z,1516706616.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:36.619Z,1516706616.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:23:36.620Z,1516706616.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:36.998Z,1516706616.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:37.013Z,1516706617.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:23:37.014Z,1516706617.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:37.382Z,1516706617.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:37.417Z,1516706617.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:23:37.418Z,1516706617.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:37.800Z,1516706617.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:37.822Z,1516706617.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:23:37.828Z,1516706617.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:38.212Z,1516706618.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:38.233Z,1516706618.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:38.600Z,1516706618.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:38.622Z,1516706618.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:38.985Z,1516706618.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:39.017Z,1516706619.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:39.384Z,1516706619.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:39.422Z,1516706619.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:39.804Z,1516706619.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:39.819Z,1516706619.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:40.218Z,1516706620.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:40.241Z,1516706620.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:40.608Z,1516706620.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:40.628Z,1516706620.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:40.989Z,1516706620.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:41.016Z,1516706621.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:41.385Z,1516706621.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:41.420Z,1516706621.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:41.813Z,1516706621.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:41.828Z,1516706621.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:42.195Z,1516706622.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:42.233Z,1516706622.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:42.600Z,1516706622.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:42.625Z,1516706622.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:42.985Z,1516706622.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:43.001Z,1516706623.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:43.387Z,1516706623.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:43.402Z,1516706623.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:43.807Z,1516706623.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:43.837Z,1516706623.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:44.219Z,1516706624.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:44.234Z,1516706624.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:44.599Z,1516706624.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:44.630Z,1516706624.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:45.008Z,1516706625.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:45.025Z,1516706625.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:45.402Z,1516706625.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:45.417Z,1516706625.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:45.800Z,1516706625.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:45.827Z,1516706625.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:46.211Z,1516706626.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:46.226Z,1516706626.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:46.604Z,1516706626.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:46.631Z,1516706626.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:46.993Z,1516706626.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:47.020Z,1516706627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:47.384Z,1516706627.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:47.421Z,1516706627.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:47.795Z,1516706627.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:47.833Z,1516706627.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:48.212Z,1516706628.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:48.227Z,1516706628.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:48.615Z,1516706628.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:48.637Z,1516706628.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:48.986Z,1516706628.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:49.026Z,1516706629.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:49.384Z,1516706629.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:49.421Z,1516706629.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:49.803Z,1516706629.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:49.830Z,1516706629.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:50.220Z,1516706630.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:50.235Z,1516706630.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:50.600Z,1516706630.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:50.620Z,1516706630.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:51.000Z,1516706631.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:51.022Z,1516706631.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:51.398Z,1516706631.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:51.428Z,1516706631.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:51.812Z,1516706631.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:51.827Z,1516706631.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:52.212Z,1516706632.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:52.227Z,1516706632.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:52.614Z,1516706632.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:52.637Z,1516706632.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:52.993Z,1516706632.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:53.017Z,1516706633.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:53.392Z,1516706633.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:53.436Z,1516706633.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:53.807Z,1516706633.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:53.837Z,1516706633.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:54.203Z,1516706634.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:54.229Z,1516706634.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:54.620Z,1516706634.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:54.634Z,1516706634.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:54.997Z,1516706634.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:55.029Z,1516706635.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:55.396Z,1516706635.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:55.437Z,1516706635.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:55.807Z,1516706635.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:55.838Z,1516706635.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:56.207Z,1516706636.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:56.239Z,1516706636.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:56.601Z,1516706636.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:56.617Z,1516706636.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:56.999Z,1516706636.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:57.014Z,1516706637.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:23:57.397Z,1516706637.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:23:57.425Z,1516706637.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:00.497Z,1516706640.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:00.517Z,1516706640.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:00.647Z,1516706640.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:00.662Z,1516706640.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:01.008Z,1516706641.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:01.024Z,1516706641.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:01.382Z,1516706641.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:01.428Z,1516706641.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:01.779Z,1516706641.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:01.817Z,1516706641.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:02.181Z,1516706642.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:02.209Z,1516706642.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:02.577Z,1516706642.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:02.613Z,1516706642.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:02.993Z,1516706642.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:03.024Z,1516706643.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:03.402Z,1516706643.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:03.417Z,1516706643.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:03.788Z,1516706643.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:03.825Z,1516706643.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:04.180Z,1516706644.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:04.221Z,1516706644.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:04.576Z,1516706644.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:04.615Z,1516706644.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:04.978Z,1516706644.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:04.995Z,1516706644.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:05.387Z,1516706645.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:05.402Z,1516706645.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:05.782Z,1516706645.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:05.828Z,1516706645.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:06.197Z,1516706646.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:06.228Z,1516706646.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:06.603Z,1516706646.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:06.629Z,1516706646.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:07.003Z,1516706647.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:07.030Z,1516706647.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:07.384Z,1516706647.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:07.424Z,1516706647.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:07.789Z,1516706647.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:07.827Z,1516706647.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:08.185Z,1516706648.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:08.201Z,1516706648.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:08.589Z,1516706648.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:08.609Z,1516706648.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:08.991Z,1516706648.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:09.032Z,1516706649.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:09.397Z,1516706649.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:09.405Z,1516706649.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T11:24:09.428Z,1516706649.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:09.801Z,1516706649.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:09.829Z,1516706649.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:10.191Z,1516706650.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:10.206Z,1516706650.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:10.584Z,1516706650.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:10.613Z,1516706650.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:10.986Z,1516706650.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:11.006Z,1516706651.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:11.385Z,1516706651.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:11.403Z,1516706651.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:11.787Z,1516706651.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:11.802Z,1516706651.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:12.188Z,1516706652.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:12.227Z,1516706652.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:12.591Z,1516706652.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:12.610Z,1516706652.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:12.992Z,1516706652.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:13.008Z,1516706653.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:13.390Z,1516706653.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:13.406Z,1516706653.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:13.784Z,1516706653.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:13.829Z,1516706653.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:14.186Z,1516706654.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:14.204Z,1516706654.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:14.590Z,1516706654.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:14.607Z,1516706654.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:14.993Z,1516706654.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:15.013Z,1516706655.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:15.395Z,1516706655.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:15.433Z,1516706655.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:15.794Z,1516706655.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:15.813Z,1516706655.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:16.184Z,1516706656.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:16.203Z,1516706656.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:16.588Z,1516706656.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:16.604Z,1516706656.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:16.984Z,1516706656.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:17.034Z,1516706657.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:17.381Z,1516706657.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:17.405Z,1516706657.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:17.785Z,1516706657.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:17.804Z,1516706657.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:18.197Z,1516706658.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:18.212Z,1516706658.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:18.594Z,1516706658.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:18.635Z,1516706658.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:18.995Z,1516706658.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:19.013Z,1516706659.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:19.389Z,1516706659.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:19.408Z,1516706659.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:19.795Z,1516706659.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:19.810Z,1516706659.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:20.187Z,1516706660.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:20.213Z,1516706660.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:20.580Z,1516706660.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:20.603Z,1516706660.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:20.995Z,1516706660.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:21.013Z,1516706661.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:21.397Z,1516706661.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:21.412Z,1516706661.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:21.798Z,1516706661.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:21.838Z,1516706661.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:22.176Z,1516706662.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:22.210Z,1516706662.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:22.576Z,1516706662.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:22.614Z,1516706662.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:22.988Z,1516706662.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:23.007Z,1516706663.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:23.377Z,1516706663.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:23.412Z,1516706663.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:23.780Z,1516706663.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:23.808Z,1516706663.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:24.200Z,1516706664.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:24.218Z,1516706664.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:24.598Z,1516706664.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:24.621Z,1516706664.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:24.997Z,1516706664.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:25.021Z,1516706665.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:25.038Z,1516706665.038 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:24:25.381Z,1516706665.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:25.407Z,1516706665.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:25.776Z,1516706665.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:25.810Z,1516706665.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:26.177Z,1516706666.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:26.216Z,1516706666.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:26.576Z,1516706666.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:26.613Z,1516706666.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:26.991Z,1516706666.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:27.006Z,1516706667.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:27.395Z,1516706667.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:27.425Z,1516706667.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:27.796Z,1516706667.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:27.814Z,1516706667.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:28.176Z,1516706668.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:28.209Z,1516706668.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:28.597Z,1516706668.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:28.612Z,1516706668.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:28.981Z,1516706668.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:29.007Z,1516706669.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:29.377Z,1516706669.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:29.416Z,1516706669.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:29.780Z,1516706669.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:29.808Z,1516706669.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:30.200Z,1516706670.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:30.221Z,1516706670.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:30.597Z,1516706670.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:30.622Z,1516706670.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:30.998Z,1516706670.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:31.017Z,1516706671.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:31.374Z,1516706671.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:31.394Z,1516706671.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:31.784Z,1516706671.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:31.811Z,1516706671.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:32.178Z,1516706672.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:32.216Z,1516706672.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:32.575Z,1516706672.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:32.590Z,1516706672.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:32.988Z,1516706672.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:33.015Z,1516706673.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:33.392Z,1516706673.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:33.433Z,1516706673.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:33.792Z,1516706673.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:33.821Z,1516706673.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:34.176Z,1516706674.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:34.214Z,1516706674.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:34.577Z,1516706674.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:34.592Z,1516706674.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:34.980Z,1516706674.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:34.997Z,1516706674.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:35.389Z,1516706675.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:35.404Z,1516706675.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:35.785Z,1516706675.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:35.800Z,1516706675.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:36.191Z,1516706676.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:36.207Z,1516706676.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:36.591Z,1516706676.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:36.606Z,1516706676.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:36.991Z,1516706676.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:37.013Z,1516706677.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:37.381Z,1516706677.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:37.404Z,1516706677.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:37.793Z,1516706677.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:37.808Z,1516706677.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:38.187Z,1516706678.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:38.201Z,1516706678.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:38.581Z,1516706678.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:38.604Z,1516706678.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:38.994Z,1516706678.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:39.014Z,1516706679.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:39.400Z,1516706679.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:39.415Z,1516706679.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:39.792Z,1516706679.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:39.814Z,1516706679.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:40.177Z,1516706680.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:40.208Z,1516706680.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:40.576Z,1516706680.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:40.616Z,1516706680.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:40.982Z,1516706680.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:40.998Z,1516706680.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:41.386Z,1516706681.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:41.401Z,1516706681.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:41.788Z,1516706681.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:41.804Z,1516706681.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:42.200Z,1516706682.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:42.237Z,1516706682.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:42.600Z,1516706682.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:42.635Z,1516706682.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:42.991Z,1516706682.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:43.006Z,1516706683.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:43.385Z,1516706683.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:43.405Z,1516706683.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:43.785Z,1516706683.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:43.800Z,1516706683.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:44.186Z,1516706684.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:44.201Z,1516706684.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:44.585Z,1516706684.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:44.600Z,1516706684.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:44.992Z,1516706684.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:45.019Z,1516706685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:45.399Z,1516706685.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:45.414Z,1516706685.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:45.795Z,1516706685.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:45.810Z,1516706685.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:46.183Z,1516706686.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:46.202Z,1516706686.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:46.576Z,1516706686.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:46.611Z,1516706686.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:46.976Z,1516706686.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:47.014Z,1516706687.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:47.394Z,1516706687.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:47.409Z,1516706687.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:47.790Z,1516706687.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:47.805Z,1516706687.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:48.196Z,1516706688.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:48.211Z,1516706688.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:48.598Z,1516706688.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:48.617Z,1516706688.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:48.997Z,1516706688.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:49.012Z,1516706689.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:49.377Z,1516706689.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:49.413Z,1516706689.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:49.776Z,1516706689.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:49.813Z,1516706689.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:50.177Z,1516706690.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:50.192Z,1516706690.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:50.578Z,1516706690.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:50.594Z,1516706690.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:50.000Z,1516706691.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:51.025Z,1516706691.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:51.403Z,1516706691.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:51.430Z,1516706691.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:51.791Z,1516706691.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:51.823Z,1516706691.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:52.182Z,1516706692.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:52.201Z,1516706692.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:52.581Z,1516706692.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:52.608Z,1516706692.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:52.985Z,1516706692.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:52.000Z,1516706693.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:53.381Z,1516706693.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:53.403Z,1516706693.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:53.785Z,1516706693.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:53.800Z,1516706693.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:54.190Z,1516706694.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:54.213Z,1516706694.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:54.594Z,1516706694.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:54.617Z,1516706694.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:54.996Z,1516706694.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:55.011Z,1516706695.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:55.380Z,1516706695.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:55.405Z,1516706695.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:55.788Z,1516706695.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:55.803Z,1516706695.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:56.186Z,1516706696.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:56.205Z,1516706696.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:56.580Z,1516706696.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:56.605Z,1516706696.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:56.994Z,1516706696.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:57.018Z,1516706697.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:57.403Z,1516706697.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:57.417Z,1516706697.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:24:57.792Z,1516706697.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:24:57.814Z,1516706697.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:00.891Z,1516706700.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:00.906Z,1516706700.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:01.007Z,1516706701.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:01.050Z,1516706701.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:01.363Z,1516706701.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:01.378Z,1516706701.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:01.771Z,1516706701.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:01.802Z,1516706701.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:02.160Z,1516706702.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:02.175Z,1516706702.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:02.556Z,1516706702.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:02.580Z,1516706702.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:02.961Z,1516706702.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:02.977Z,1516706702.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:03.354Z,1516706703.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:03.376Z,1516706703.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:03.752Z,1516706703.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:03.785Z,1516706703.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:04.167Z,1516706704.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:04.182Z,1516706704.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:04.567Z,1516706704.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:04.589Z,1516706704.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:04.968Z,1516706704.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:04.989Z,1516706704.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:05.359Z,1516706705.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:05.374Z,1516706705.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:05.752Z,1516706705.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:05.775Z,1516706705.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:06.162Z,1516706706.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:06.177Z,1516706706.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:06.552Z,1516706706.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:06.589Z,1516706706.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:06.972Z,1516706706.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:06.987Z,1516706706.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:07.376Z,1516706707.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:07.391Z,1516706707.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:07.766Z,1516706707.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:07.790Z,1516706707.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:08.153Z,1516706708.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:08.180Z,1516706708.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:08.549Z,1516706708.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:08.581Z,1516706708.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:08.948Z,1516706708.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:08.981Z,1516706708.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:09.350Z,1516706709.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:09.366Z,1516706709.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:09.749Z,1516706709.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:09.769Z,1516706709.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:10.166Z,1516706710.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:10.197Z,1516706710.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:10.571Z,1516706710.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:10.605Z,1516706710.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:10.967Z,1516706710.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:10.994Z,1516706710.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:11.352Z,1516706711.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:11.367Z,1516706711.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:11.754Z,1516706711.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:11.769Z,1516706711.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:12.153Z,1516706712.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:12.180Z,1516706712.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:12.559Z,1516706712.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:12.573Z,1516706712.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:12.963Z,1516706712.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:12.978Z,1516706712.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:13.364Z,1516706713.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:13.385Z,1516706713.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:13.768Z,1516706713.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:13.788Z,1516706713.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:14.162Z,1516706714.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:14.177Z,1516706714.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:14.553Z,1516706714.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:14.584Z,1516706714.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:14.969Z,1516706714.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:14.984Z,1516706714.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:15.372Z,1516706715.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:15.393Z,1516706715.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:15.772Z,1516706715.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:15.793Z,1516706715.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:16.150Z,1516706716.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:16.187Z,1516706716.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:16.549Z,1516706716.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:16.589Z,1516706716.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:16.974Z,1516706716.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:16.989Z,1516706716.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:17.377Z,1516706717.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:17.392Z,1516706717.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:17.760Z,1516706717.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:17.797Z,1516706717.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:18.154Z,1516706718.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:18.190Z,1516706718.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:18.549Z,1516706718.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:18.595Z,1516706718.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:18.964Z,1516706718.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:18.997Z,1516706718.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:19.364Z,1516706719.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:19.401Z,1516706719.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:19.767Z,1516706719.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:19.800Z,1516706719.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:20.158Z,1516706720.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:20.192Z,1516706720.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:20.561Z,1516706720.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:20.591Z,1516706720.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:20.967Z,1516706720.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:21.002Z,1516706721.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:21.378Z,1516706721.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:21.401Z,1516706721.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:21.778Z,1516706721.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:21.793Z,1516706721.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:22.161Z,1516706722.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:22.200Z,1516706722.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:22.557Z,1516706722.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:22.593Z,1516706722.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:22.967Z,1516706722.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:22.998Z,1516706722.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:23.371Z,1516706723.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:23.405Z,1516706723.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:23.764Z,1516706723.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:23.801Z,1516706723.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:24.159Z,1516706724.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:24.174Z,1516706724.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:24.557Z,1516706724.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:24.582Z,1516706724.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:24.971Z,1516706724.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:25.007Z,1516706725.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:25.367Z,1516706725.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:25.382Z,1516706725.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:25.763Z,1516706725.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:25.778Z,1516706725.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:26.154Z,1516706726.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:26.185Z,1516706726.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:26.562Z,1516706726.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:26.577Z,1516706726.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:26.968Z,1516706726.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:26.983Z,1516706726.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:27.368Z,1516706727.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:27.387Z,1516706727.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:27.764Z,1516706727.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:27.787Z,1516706727.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:28.150Z,1516706728.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:28.181Z,1516706728.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:28.549Z,1516706728.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:28.581Z,1516706728.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:28.960Z,1516706728.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:28.987Z,1516706728.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:29.363Z,1516706729.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:29.400Z,1516706729.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:29.760Z,1516706729.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:29.786Z,1516706729.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:30.150Z,1516706730.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:30.189Z,1516706730.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:30.549Z,1516706730.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:30.593Z,1516706730.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:30.967Z,1516706730.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:30.994Z,1516706730.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:31.386Z,1516706731.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:31.404Z,1516706731.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:31.763Z,1516706731.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:31.798Z,1516706731.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:32.158Z,1516706732.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:32.193Z,1516706732.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:32.557Z,1516706732.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:32.572Z,1516706732.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:32.963Z,1516706732.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:32.978Z,1516706732.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:33.371Z,1516706733.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:33.404Z,1516706733.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:33.760Z,1516706733.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:33.775Z,1516706733.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:34.158Z,1516706734.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:34.172Z,1516706734.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:34.558Z,1516706734.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:34.581Z,1516706734.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:34.971Z,1516706734.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:34.986Z,1516706734.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:35.364Z,1516706735.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:35.378Z,1516706735.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:35.762Z,1516706735.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:35.777Z,1516706735.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:36.153Z,1516706736.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:36.181Z,1516706736.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:36.558Z,1516706736.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:36.573Z,1516706736.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:36.962Z,1516706736.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:36.977Z,1516706736.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:37.367Z,1516706737.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:37.382Z,1516706737.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:37.763Z,1516706737.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:37.778Z,1516706737.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:38.156Z,1516706738.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:38.184Z,1516706738.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:38.561Z,1516706738.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:38.576Z,1516706738.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:38.967Z,1516706738.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:38.982Z,1516706738.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:39.371Z,1516706739.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:39.386Z,1516706739.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:39.767Z,1516706739.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:39.782Z,1516706739.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:40.159Z,1516706740.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:40.173Z,1516706740.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:40.557Z,1516706740.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:40.572Z,1516706740.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:40.967Z,1516706740.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:40.982Z,1516706740.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:41.367Z,1516706741.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:41.382Z,1516706741.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:41.764Z,1516706741.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:41.788Z,1516706741.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:42.162Z,1516706742.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:42.177Z,1516706742.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:42.559Z,1516706742.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:42.574Z,1516706742.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:42.968Z,1516706742.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:42.983Z,1516706742.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:43.372Z,1516706743.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:43.386Z,1516706743.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:43.770Z,1516706743.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:43.785Z,1516706743.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:44.158Z,1516706744.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:44.213Z,1516706744.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:44.566Z,1516706744.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:44.585Z,1516706744.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:44.973Z,1516706744.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:44.988Z,1516706744.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:45.368Z,1516706745.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:45.383Z,1516706745.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:45.768Z,1516706745.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:45.783Z,1516706745.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:46.161Z,1516706746.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:46.176Z,1516706746.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:46.551Z,1516706746.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:46.578Z,1516706746.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:46.973Z,1516706746.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:46.988Z,1516706746.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:47.377Z,1516706747.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:47.392Z,1516706747.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:47.770Z,1516706747.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:47.785Z,1516706747.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:48.150Z,1516706748.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:48.180Z,1516706748.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:48.549Z,1516706748.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:48.584Z,1516706748.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:48.969Z,1516706748.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:48.989Z,1516706748.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:49.373Z,1516706749.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:49.388Z,1516706749.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:49.767Z,1516706749.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:49.789Z,1516706749.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:50.150Z,1516706750.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:50.177Z,1516706750.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:50.549Z,1516706750.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:50.586Z,1516706750.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:50.969Z,1516706750.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:50.984Z,1516706750.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:51.364Z,1516706751.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:51.392Z,1516706751.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:51.772Z,1516706751.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:51.787Z,1516706751.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:52.149Z,1516706752.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:52.180Z,1516706752.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:52.547Z,1516706752.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:52.585Z,1516706752.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:52.953Z,1516706752.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:52.979Z,1516706752.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:53.363Z,1516706753.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:53.388Z,1516706753.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:53.772Z,1516706753.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:53.787Z,1516706753.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:54.164Z,1516706754.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:54.186Z,1516706754.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:54.551Z,1516706754.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:54.588Z,1516706754.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:54.954Z,1516706754.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:54.985Z,1516706754.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:55.351Z,1516706755.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:55.374Z,1516706755.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:55.748Z,1516706755.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:55.793Z,1516706755.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:56.168Z,1516706756.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:56.201Z,1516706756.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:56.579Z,1516706756.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:56.598Z,1516706756.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:56.966Z,1516706756.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:56.993Z,1516706756.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:57.355Z,1516706757.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:57.394Z,1516706757.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:57.764Z,1516706757.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:57.808Z,1516706757.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:25:58.160Z,1516706758.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:25:58.194Z,1516706758.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:03.486Z,1516706763.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:03.530Z,1516706763.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:03.659Z,1516706763.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:03.699Z,1516706763.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:04.056Z,1516706764.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:04.104Z,1516706764.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:04.462Z,1516706764.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:04.481Z,1516706764.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:04.845Z,1516706764.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:04.897Z,1516706764.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:05.279Z,1516706765.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:05.363Z,1516706765.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:05.634Z,1516706765.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:05.671Z,1516706765.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:06.046Z,1516706766.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:06.085Z,1516706766.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:06.457Z,1516706766.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:06.526Z,1516706766.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:06.850Z,1516706766.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:06.891Z,1516706766.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:07.247Z,1516706767.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:07.301Z,1516706767.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:07.655Z,1516706767.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:07.696Z,1516706767.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:08.039Z,1516706768.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:08.062Z,1516706768.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:08.443Z,1516706768.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:08.473Z,1516706768.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:08.830Z,1516706768.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:08.896Z,1516706768.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:09.250Z,1516706769.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:09.266Z,1516706769.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:09.656Z,1516706769.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:09.681Z,1516706769.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:10.050Z,1516706770.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:10.110Z,1516706770.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:10.441Z,1516706770.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:10.465Z,1516706770.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:10.859Z,1516706770.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:10.905Z,1516706770.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:11.235Z,1516706771.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:11.298Z,1516706771.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:11.635Z,1516706771.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:11.671Z,1516706771.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:12.054Z,1516706772.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:12.078Z,1516706772.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:12.445Z,1516706772.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:12.520Z,1516706772.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:12.843Z,1516706772.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:12.881Z,1516706772.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:13.274Z,1516706773.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:13.302Z,1516706773.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:13.640Z,1516706773.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:13.698Z,1516706773.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:14.045Z,1516706774.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:14.101Z,1516706774.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:14.455Z,1516706774.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:14.481Z,1516706774.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:14.848Z,1516706774.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:14.863Z,1516706774.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:15.230Z,1516706775.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:15.263Z,1516706775.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:15.649Z,1516706775.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:15.665Z,1516706775.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:16.046Z,1516706776.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:16.071Z,1516706776.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:16.444Z,1516706776.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:16.466Z,1516706776.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:16.844Z,1516706776.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:16.865Z,1516706776.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:17.233Z,1516706777.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:17.269Z,1516706777.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:17.626Z,1516706777.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:17.654Z,1516706777.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.048Z,1516706778.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:18.062Z,1516706778.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.452Z,1516706778.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:18.467Z,1516706778.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.848Z,1516706778.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:18.870Z,1516706778.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.870Z,1516706778.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163 2018-01-23T11:26:18.870Z,1516706778.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:26:18.872Z,1516706778.872 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.872Z,1516706778.872 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 163 2018-01-23T11:26:18.872Z,1516706778.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:26:18.874Z,1516706778.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:18.874Z,1516706778.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163 2018-01-23T11:26:18.874Z,1516706778.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:26:18.886Z,1516706778.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:26:18.886Z,1516706778.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:26:18.886Z,1516706778.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:26:19.233Z,1516706779.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:19.276Z,1516706779.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:26:19.276Z,1516706779.276 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163 2018-01-23T11:26:19.276Z,1516706779.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:26:19.276Z,1516706779.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 163 2018-01-23T11:26:19.277Z,1516706779.277 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:26:19.277Z,1516706779.277 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163 2018-01-23T11:26:19.629Z,1516706779.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:19.665Z,1516706779.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:26:19.666Z,1516706779.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:26:19.666Z,1516706779.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:26:19.666Z,1516706779.666 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:26:19.667Z,1516706779.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:26:19.667Z,1516706779.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:26:19.668Z,1516706779.668 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:26:19.668Z,1516706779.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:26:19.668Z,1516706779.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:26:20.040Z,1516706780.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:20.076Z,1516706780.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:26:20.077Z,1516706780.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:20.460Z,1516706780.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:20.474Z,1516706780.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:26:20.475Z,1516706780.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:20.843Z,1516706780.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:20.875Z,1516706780.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:26:20.876Z,1516706780.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:21.234Z,1516706781.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:21.265Z,1516706781.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:26:21.266Z,1516706781.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:21.633Z,1516706781.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:21.648Z,1516706781.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:26:21.649Z,1516706781.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:22.052Z,1516706782.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:22.082Z,1516706782.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:26:22.083Z,1516706782.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:22.444Z,1516706782.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:22.466Z,1516706782.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:26:22.471Z,1516706782.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:22.848Z,1516706782.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:22.878Z,1516706782.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:26:22.880Z,1516706782.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:23.234Z,1516706783.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:23.248Z,1516706783.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:26:23.249Z,1516706783.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:23.636Z,1516706783.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:23.674Z,1516706783.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:26:23.675Z,1516706783.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:24.056Z,1516706784.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:24.088Z,1516706784.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:26:24.089Z,1516706784.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:24.447Z,1516706784.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:24.479Z,1516706784.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:26:24.480Z,1516706784.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:24.840Z,1516706784.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:24.854Z,1516706784.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:26:24.855Z,1516706784.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:25.239Z,1516706785.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:25.253Z,1516706785.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:26:25.254Z,1516706785.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:25.641Z,1516706785.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:25.660Z,1516706785.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:26:25.661Z,1516706785.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:26.047Z,1516706786.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:26.062Z,1516706786.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:26:26.083Z,1516706786.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:26.444Z,1516706786.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:26.458Z,1516706786.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:26:26.459Z,1516706786.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:26.842Z,1516706786.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:26.863Z,1516706786.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:26:26.864Z,1516706786.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:27.238Z,1516706787.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:27.253Z,1516706787.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:26:27.254Z,1516706787.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:27.645Z,1516706787.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:27.660Z,1516706787.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:26:27.660Z,1516706787.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:28.043Z,1516706788.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:28.057Z,1516706788.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:26:28.058Z,1516706788.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:28.444Z,1516706788.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:28.460Z,1516706788.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:26:28.461Z,1516706788.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:28.855Z,1516706788.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:28.870Z,1516706788.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:26:28.887Z,1516706788.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:29.245Z,1516706789.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:29.260Z,1516706789.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:26:29.261Z,1516706789.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:29.633Z,1516706789.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:29.656Z,1516706789.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:26:29.657Z,1516706789.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:30.055Z,1516706790.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:30.070Z,1516706790.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:26:30.071Z,1516706790.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:30.452Z,1516706790.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:30.466Z,1516706790.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:26:30.467Z,1516706790.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:30.851Z,1516706790.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:30.872Z,1516706790.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:26:30.873Z,1516706790.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:31.246Z,1516706791.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:31.260Z,1516706791.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:26:31.261Z,1516706791.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:31.642Z,1516706791.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:31.660Z,1516706791.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:26:31.661Z,1516706791.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:32.055Z,1516706792.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:32.069Z,1516706792.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:26:32.070Z,1516706792.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:32.454Z,1516706792.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:32.469Z,1516706792.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:26:32.470Z,1516706792.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:32.848Z,1516706792.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:32.862Z,1516706792.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:26:32.863Z,1516706792.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:33.239Z,1516706793.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:33.259Z,1516706793.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:26:33.260Z,1516706793.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:33.630Z,1516706793.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:33.662Z,1516706793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:26:33.667Z,1516706793.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:34.056Z,1516706794.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:34.076Z,1516706794.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:26:34.077Z,1516706794.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:34.447Z,1516706794.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:34.462Z,1516706794.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:26:34.464Z,1516706794.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:34.844Z,1516706794.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:34.862Z,1516706794.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:26:34.867Z,1516706794.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:35.248Z,1516706795.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:35.263Z,1516706795.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:26:35.264Z,1516706795.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:35.632Z,1516706795.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:35.657Z,1516706795.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:26:35.658Z,1516706795.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:36.050Z,1516706796.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:36.073Z,1516706796.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:26:36.074Z,1516706796.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:36.454Z,1516706796.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:36.476Z,1516706796.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:26:36.477Z,1516706796.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:36.844Z,1516706796.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:36.866Z,1516706796.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:26:36.867Z,1516706796.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:37.231Z,1516706797.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:37.268Z,1516706797.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:26:37.269Z,1516706797.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:37.637Z,1516706797.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:37.665Z,1516706797.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:26:37.666Z,1516706797.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:38.054Z,1516706798.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:38.069Z,1516706798.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:26:38.070Z,1516706798.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:38.447Z,1516706798.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:38.469Z,1516706798.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:26:38.470Z,1516706798.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:38.848Z,1516706798.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:38.871Z,1516706798.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:39.232Z,1516706799.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:39.264Z,1516706799.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:39.628Z,1516706799.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:39.661Z,1516706799.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:40.045Z,1516706800.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:40.060Z,1516706800.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x1953 got:0x7106 2018-01-23T11:26:40.089Z,1516706800.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:40.444Z,1516706800.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:40.466Z,1516706800.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:40.858Z,1516706800.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:40.873Z,1516706800.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:41.230Z,1516706801.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:41.264Z,1516706801.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:41.630Z,1516706801.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:41.650Z,1516706801.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x26161 got:0x11545 2018-01-23T11:26:41.677Z,1516706801.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:42.044Z,1516706802.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:42.066Z,1516706802.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:42.470Z,1516706802.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:42.485Z,1516706802.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:42.854Z,1516706802.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:42.878Z,1516706802.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:43.244Z,1516706803.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:43.275Z,1516706803.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:43.636Z,1516706803.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:43.661Z,1516706803.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:44.052Z,1516706804.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:44.129Z,1516706804.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:44.445Z,1516706804.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:44.462Z,1516706804.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:44.845Z,1516706804.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:44.865Z,1516706804.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:45.240Z,1516706805.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:45.255Z,1516706805.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:45.640Z,1516706805.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:45.655Z,1516706805.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:46.040Z,1516706806.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:46.083Z,1516706806.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:46.444Z,1516706806.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:46.452Z,1516706806.452 [PNI_TCM](ERROR): CRC does not match. Expected:0x24237 got:0x13582 2018-01-23T11:26:46.487Z,1516706806.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:46.845Z,1516706806.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:46.938Z,1516706806.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:47.248Z,1516706807.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:47.263Z,1516706807.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:47.637Z,1516706807.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:47.681Z,1516706807.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:48.036Z,1516706808.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:48.050Z,1516706808.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T11:26:48.078Z,1516706808.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:48.437Z,1516706808.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:48.468Z,1516706808.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:48.837Z,1516706808.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:48.857Z,1516706808.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:49.248Z,1516706809.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:49.266Z,1516706809.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:49.650Z,1516706809.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:49.665Z,1516706809.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:50.049Z,1516706810.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:50.064Z,1516706810.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:50.438Z,1516706810.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:50.462Z,1516706810.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:50.843Z,1516706810.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:50.890Z,1516706810.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:51.232Z,1516706811.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:51.252Z,1516706811.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T11:26:51.286Z,1516706811.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:51.634Z,1516706811.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:51.668Z,1516706811.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:52.040Z,1516706812.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:52.056Z,1516706812.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:52.447Z,1516706812.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:52.486Z,1516706812.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:52.853Z,1516706812.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:52.861Z,1516706812.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x39294 got:0x6466 2018-01-23T11:26:52.900Z,1516706812.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:53.251Z,1516706813.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:53.267Z,1516706813.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:53.634Z,1516706813.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:53.659Z,1516706813.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:54.032Z,1516706814.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:54.068Z,1516706814.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:54.442Z,1516706814.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:54.460Z,1516706814.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:54.832Z,1516706814.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:54.858Z,1516706814.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:55.251Z,1516706815.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:55.266Z,1516706815.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:55.651Z,1516706815.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:55.689Z,1516706815.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:56.047Z,1516706816.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:56.058Z,1516706816.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17282 2018-01-23T11:26:56.096Z,1516706816.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:56.432Z,1516706816.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:56.459Z,1516706816.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:56.462Z,1516706816.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:21:56.3Z 2018-01-23T11:26:56.462Z,1516706816.462 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:26:56.462Z,1516706816.462 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:26:56.839Z,1516706816.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:56.869Z,1516706816.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:57.356Z,1516706817.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:57.372Z,1516706817.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:26:57.629Z,1516706817.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:26:57.673Z,1516706817.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:00.745Z,1516706820.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:00.761Z,1516706820.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:00.837Z,1516706820.837 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0192.lzma 2018-01-23T11:27:00.873Z,1516706820.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:00.905Z,1516706820.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:01.228Z,1516706821.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:01.269Z,1516706821.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:01.589Z,1516706821.589 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0192.lzma.bak 2018-01-23T11:27:01.589Z,1516706821.589 [DataOverHttps](INFO): SBD MOMSN=7755493 2018-01-23T11:27:01.617Z,1516706821.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:01.632Z,1516706821.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:02.252Z,1516706822.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:02.267Z,1516706822.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:02.410Z,1516706822.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:02.447Z,1516706822.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:05.507Z,1516706825.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:05.523Z,1516706825.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:05.632Z,1516706825.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:05.680Z,1516706825.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:05.994Z,1516706825.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:06.009Z,1516706826.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:06.394Z,1516706826.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:06.410Z,1516706826.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:06.770Z,1516706826.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:06.785Z,1516706826.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:07.172Z,1516706827.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:07.209Z,1516706827.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:10.291Z,1516706830.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:10.321Z,1516706830.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:10.407Z,1516706830.407 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0193.lzma 2018-01-23T11:27:10.428Z,1516706830.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:10.474Z,1516706830.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:10.787Z,1516706830.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:10.811Z,1516706830.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:11.152Z,1516706831.152 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0193.lzma.bak 2018-01-23T11:27:11.153Z,1516706831.153 [DataOverHttps](INFO): SBD MOMSN=7755495 2018-01-23T11:27:11.211Z,1516706831.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:11.225Z,1516706831.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:11.916Z,1516706831.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:11.930Z,1516706831.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:11.933Z,1516706831.933 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:27:11.934Z,1516706831.934 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:27:11.934Z,1516706831.934 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:27:12.041Z,1516706832.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:12.086Z,1516706832.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:15.090Z,1516706835.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:15.117Z,1516706835.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:15.214Z,1516706835.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:15.261Z,1516706835.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:15.571Z,1516706835.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:15.587Z,1516706835.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:15.983Z,1516706835.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:16.017Z,1516706836.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:16.384Z,1516706836.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:16.414Z,1516706836.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:16.765Z,1516706836.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:16.780Z,1516706836.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:17.169Z,1516706837.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:17.184Z,1516706837.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:17.570Z,1516706837.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:17.585Z,1516706837.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:17.968Z,1516706837.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:17.983Z,1516706837.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:18.375Z,1516706838.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:18.390Z,1516706838.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:18.779Z,1516706838.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:18.794Z,1516706838.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:19.174Z,1516706839.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:19.189Z,1516706839.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:19.571Z,1516706839.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:19.585Z,1516706839.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:19.968Z,1516706839.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:19.986Z,1516706839.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:20.373Z,1516706840.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:20.393Z,1516706840.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:20.771Z,1516706840.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:20.785Z,1516706840.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:21.175Z,1516706841.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:21.190Z,1516706841.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:21.575Z,1516706841.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:21.590Z,1516706841.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:21.976Z,1516706841.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:21.991Z,1516706841.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:22.368Z,1516706842.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:22.387Z,1516706842.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:22.766Z,1516706842.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:22.787Z,1516706842.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:23.170Z,1516706843.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:23.185Z,1516706843.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:23.568Z,1516706843.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:23.588Z,1516706843.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:23.968Z,1516706843.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:23.983Z,1516706843.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:24.376Z,1516706844.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:24.390Z,1516706844.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:24.773Z,1516706844.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:24.789Z,1516706844.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:25.174Z,1516706845.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:25.189Z,1516706845.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:25.569Z,1516706845.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:25.584Z,1516706845.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:25.968Z,1516706845.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:25.983Z,1516706845.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:26.364Z,1516706846.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:26.410Z,1516706846.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:26.770Z,1516706846.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:26.788Z,1516706846.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:27.179Z,1516706847.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:27.194Z,1516706847.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:27.575Z,1516706847.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:27.590Z,1516706847.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:27.975Z,1516706847.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:27.996Z,1516706847.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:28.361Z,1516706848.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:28.376Z,1516706848.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:28.762Z,1516706848.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:28.777Z,1516706848.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:29.193Z,1516706849.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:29.224Z,1516706849.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:29.563Z,1516706849.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:29.578Z,1516706849.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:29.962Z,1516706849.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:29.977Z,1516706849.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:30.375Z,1516706850.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:30.390Z,1516706850.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:30.771Z,1516706850.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:30.786Z,1516706850.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:31.176Z,1516706851.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:31.216Z,1516706851.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:31.565Z,1516706851.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:31.579Z,1516706851.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:31.980Z,1516706851.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:32.007Z,1516706852.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:32.370Z,1516706852.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:32.397Z,1516706852.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:32.761Z,1516706852.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:32.792Z,1516706852.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:33.172Z,1516706853.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:33.188Z,1516706853.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:33.576Z,1516706853.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:33.591Z,1516706853.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:33.972Z,1516706853.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:33.986Z,1516706853.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:34.370Z,1516706854.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:34.386Z,1516706854.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:34.766Z,1516706854.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:34.789Z,1516706854.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:35.175Z,1516706855.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:35.191Z,1516706855.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:35.573Z,1516706855.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:35.589Z,1516706855.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:35.974Z,1516706855.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:35.990Z,1516706855.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:36.369Z,1516706856.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:36.395Z,1516706856.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:36.769Z,1516706856.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:36.789Z,1516706856.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:37.174Z,1516706857.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:37.189Z,1516706857.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:37.575Z,1516706857.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:37.590Z,1516706857.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:37.974Z,1516706857.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:37.989Z,1516706857.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:38.368Z,1516706858.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:38.387Z,1516706858.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:38.769Z,1516706858.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:38.785Z,1516706858.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:39.180Z,1516706859.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:39.195Z,1516706859.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:39.576Z,1516706859.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:39.590Z,1516706859.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:39.974Z,1516706859.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:39.989Z,1516706859.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:40.368Z,1516706860.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:40.388Z,1516706860.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:40.768Z,1516706860.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:40.783Z,1516706860.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:41.175Z,1516706861.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:41.190Z,1516706861.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:41.573Z,1516706861.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:41.597Z,1516706861.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:41.978Z,1516706861.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:41.994Z,1516706861.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:42.369Z,1516706862.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:42.397Z,1516706862.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:42.766Z,1516706862.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:42.790Z,1516706862.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:43.178Z,1516706863.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:43.193Z,1516706863.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:43.579Z,1516706863.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:43.594Z,1516706863.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:43.978Z,1516706863.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:43.993Z,1516706863.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:44.368Z,1516706864.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:44.387Z,1516706864.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:44.769Z,1516706864.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:44.784Z,1516706864.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:45.179Z,1516706865.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:45.194Z,1516706865.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:45.578Z,1516706865.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:45.597Z,1516706865.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:45.978Z,1516706865.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:45.993Z,1516706865.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:46.368Z,1516706866.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:46.387Z,1516706866.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:46.764Z,1516706866.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:46.786Z,1516706866.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:47.178Z,1516706867.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:47.193Z,1516706867.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:47.575Z,1516706867.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:47.596Z,1516706867.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:47.979Z,1516706867.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:47.994Z,1516706867.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:48.370Z,1516706868.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:48.392Z,1516706868.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:48.766Z,1516706868.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:48.781Z,1516706868.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:49.179Z,1516706869.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:49.194Z,1516706869.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:49.578Z,1516706869.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:49.592Z,1516706869.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:49.976Z,1516706869.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:50.007Z,1516706870.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:50.374Z,1516706870.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:50.389Z,1516706870.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:50.768Z,1516706870.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:50.793Z,1516706870.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:51.178Z,1516706871.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:51.193Z,1516706871.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:51.578Z,1516706871.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:51.597Z,1516706871.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:51.979Z,1516706871.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:52.000Z,1516706872.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:52.371Z,1516706872.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:52.386Z,1516706872.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:52.766Z,1516706872.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:52.795Z,1516706872.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:53.178Z,1516706873.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:53.200Z,1516706873.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:53.576Z,1516706873.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:53.603Z,1516706873.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:53.982Z,1516706873.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:53.997Z,1516706873.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:54.370Z,1516706874.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:54.385Z,1516706874.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:54.764Z,1516706874.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:54.786Z,1516706874.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:55.179Z,1516706875.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:55.194Z,1516706875.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:55.582Z,1516706875.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:55.597Z,1516706875.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:55.976Z,1516706875.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:56.003Z,1516706876.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:56.361Z,1516706876.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:56.399Z,1516706876.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:56.760Z,1516706876.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:56.796Z,1516706876.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:57.183Z,1516706877.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:57.198Z,1516706877.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:57.580Z,1516706877.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:57.607Z,1516706877.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:57.974Z,1516706877.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:58.000Z,1516706878.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:58.365Z,1516706878.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:58.401Z,1516706878.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:58.760Z,1516706878.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:58.804Z,1516706878.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:59.171Z,1516706879.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:59.206Z,1516706879.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:59.571Z,1516706879.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:27:59.597Z,1516706879.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:27:59.971Z,1516706879.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:00.005Z,1516706880.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:00.361Z,1516706880.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:00.405Z,1516706880.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:00.762Z,1516706880.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:00.777Z,1516706880.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:01.179Z,1516706881.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:01.206Z,1516706881.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:01.579Z,1516706881.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:01.607Z,1516706881.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:01.976Z,1516706881.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:02.009Z,1516706882.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:02.374Z,1516706882.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:02.389Z,1516706882.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:02.769Z,1516706882.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:02.783Z,1516706882.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:03.176Z,1516706883.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:03.213Z,1516706883.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:03.584Z,1516706883.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:03.615Z,1516706883.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:03.976Z,1516706883.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:03.996Z,1516706883.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:04.366Z,1516706884.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:04.382Z,1516706884.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:04.765Z,1516706884.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:04.788Z,1516706884.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:05.169Z,1516706885.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:05.184Z,1516706885.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:05.579Z,1516706885.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:05.595Z,1516706885.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:05.976Z,1516706885.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:05.992Z,1516706885.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:06.378Z,1516706886.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:06.393Z,1516706886.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:06.769Z,1516706886.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:06.796Z,1516706886.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:07.172Z,1516706887.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:07.189Z,1516706887.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:07.570Z,1516706887.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:07.585Z,1516706887.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:07.969Z,1516706887.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:07.989Z,1516706887.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:08.378Z,1516706888.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:08.401Z,1516706888.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:08.779Z,1516706888.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:08.794Z,1516706888.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:09.180Z,1516706889.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:09.195Z,1516706889.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:09.569Z,1516706889.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:09.584Z,1516706889.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:09.969Z,1516706889.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:09.985Z,1516706889.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:10.365Z,1516706890.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:10.388Z,1516706890.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:10.766Z,1516706890.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:10.793Z,1516706890.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:11.170Z,1516706891.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:11.185Z,1516706891.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:11.576Z,1516706891.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:11.599Z,1516706891.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:11.980Z,1516706891.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:12.009Z,1516706892.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:12.386Z,1516706892.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:12.401Z,1516706892.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:15.459Z,1516706895.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:15.482Z,1516706895.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:15.589Z,1516706895.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:15.636Z,1516706895.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:15.936Z,1516706895.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:15.965Z,1516706895.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:16.347Z,1516706896.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:16.362Z,1516706896.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:16.743Z,1516706896.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:16.758Z,1516706896.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:17.141Z,1516706897.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:17.161Z,1516706897.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:17.538Z,1516706897.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:17.553Z,1516706897.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:17.936Z,1516706897.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:17.957Z,1516706897.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:18.342Z,1516706898.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:18.357Z,1516706898.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:18.742Z,1516706898.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:18.757Z,1516706898.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:19.141Z,1516706899.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:19.161Z,1516706899.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:19.536Z,1516706899.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:19.557Z,1516706899.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:19.937Z,1516706899.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:19.956Z,1516706899.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:20.328Z,1516706900.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:20.348Z,1516706900.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:20.729Z,1516706900.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:20.751Z,1516706900.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:21.133Z,1516706901.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:21.147Z,1516706901.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:21.543Z,1516706901.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:21.558Z,1516706901.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:21.946Z,1516706901.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:21.961Z,1516706901.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:22.344Z,1516706902.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:22.364Z,1516706902.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:22.722Z,1516706902.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:22.753Z,1516706902.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:23.136Z,1516706903.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:23.154Z,1516706903.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:23.525Z,1516706903.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:23.561Z,1516706903.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:23.924Z,1516706903.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:23.961Z,1516706903.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:24.347Z,1516706904.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:24.362Z,1516706904.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:24.747Z,1516706904.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:24.762Z,1516706904.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:25.143Z,1516706905.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:25.158Z,1516706905.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:25.524Z,1516706905.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:25.560Z,1516706905.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:25.924Z,1516706905.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:25.958Z,1516706905.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:26.322Z,1516706906.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:26.345Z,1516706906.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:26.737Z,1516706906.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:26.763Z,1516706906.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:27.124Z,1516706907.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:27.162Z,1516706907.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:27.536Z,1516706907.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:27.573Z,1516706907.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:27.951Z,1516706907.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:27.966Z,1516706907.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:28.334Z,1516706908.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:28.370Z,1516706908.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:28.722Z,1516706908.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:28.737Z,1516706908.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:29.124Z,1516706909.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:29.145Z,1516706909.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:29.533Z,1516706909.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:29.548Z,1516706909.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:29.932Z,1516706909.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:29.969Z,1516706909.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:30.343Z,1516706910.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:30.374Z,1516706910.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:30.743Z,1516706910.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:30.758Z,1516706910.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:31.136Z,1516706911.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:31.151Z,1516706911.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:31.531Z,1516706911.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:31.546Z,1516706911.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:31.932Z,1516706911.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:31.952Z,1516706911.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:32.331Z,1516706912.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:32.357Z,1516706912.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:32.734Z,1516706912.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:32.749Z,1516706912.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:33.133Z,1516706913.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:33.148Z,1516706913.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:33.544Z,1516706913.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:33.559Z,1516706913.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:33.942Z,1516706913.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:33.965Z,1516706913.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:34.343Z,1516706914.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:34.357Z,1516706914.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:34.729Z,1516706914.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:34.756Z,1516706914.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:35.136Z,1516706915.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:35.151Z,1516706915.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:35.538Z,1516706915.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:35.553Z,1516706915.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:35.932Z,1516706915.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:35.953Z,1516706915.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:36.347Z,1516706916.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:36.362Z,1516706916.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:36.747Z,1516706916.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:36.768Z,1516706916.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:37.147Z,1516706917.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:37.162Z,1516706917.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:37.528Z,1516706917.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:37.553Z,1516706917.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:37.933Z,1516706917.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:37.953Z,1516706917.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:38.322Z,1516706918.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:38.349Z,1516706918.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:38.728Z,1516706918.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:38.760Z,1516706918.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:39.133Z,1516706919.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:39.148Z,1516706919.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:39.540Z,1516706919.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:39.564Z,1516706919.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:39.947Z,1516706919.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:39.963Z,1516706919.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:40.338Z,1516706920.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:40.370Z,1516706920.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:40.722Z,1516706920.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:40.750Z,1516706920.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:41.123Z,1516706921.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:41.156Z,1516706921.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:41.525Z,1516706921.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:41.562Z,1516706921.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:41.928Z,1516706921.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:41.954Z,1516706921.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:42.340Z,1516706922.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:42.362Z,1516706922.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:42.748Z,1516706922.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:42.762Z,1516706922.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:43.143Z,1516706923.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:43.158Z,1516706923.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:43.524Z,1516706923.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:43.557Z,1516706923.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:43.928Z,1516706923.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:43.963Z,1516706923.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:44.322Z,1516706924.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:44.337Z,1516706924.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:44.725Z,1516706924.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:44.761Z,1516706924.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:45.128Z,1516706925.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:45.143Z,1516706925.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:45.539Z,1516706925.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:45.570Z,1516706925.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:45.950Z,1516706925.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:45.981Z,1516706925.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:46.343Z,1516706926.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:46.378Z,1516706926.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:46.726Z,1516706926.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:46.741Z,1516706926.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:47.137Z,1516706927.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:47.152Z,1516706927.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:47.533Z,1516706927.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:47.548Z,1516706927.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:47.930Z,1516706927.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:47.957Z,1516706927.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:48.348Z,1516706928.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:48.381Z,1516706928.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:48.740Z,1516706928.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:48.754Z,1516706928.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:49.136Z,1516706929.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:49.152Z,1516706929.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:49.531Z,1516706929.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:49.547Z,1516706929.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:49.934Z,1516706929.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:49.971Z,1516706929.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:50.328Z,1516706930.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:50.348Z,1516706930.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:50.732Z,1516706930.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:50.759Z,1516706930.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:51.133Z,1516706931.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:51.148Z,1516706931.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:51.542Z,1516706931.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:51.558Z,1516706931.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:51.947Z,1516706931.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:51.962Z,1516706931.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:52.345Z,1516706932.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:52.364Z,1516706932.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:52.722Z,1516706932.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:52.754Z,1516706932.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:53.136Z,1516706933.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:53.155Z,1516706933.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:53.526Z,1516706933.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:53.562Z,1516706933.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:53.925Z,1516706933.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:53.952Z,1516706933.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:54.340Z,1516706934.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:54.367Z,1516706934.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:54.748Z,1516706934.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:54.763Z,1516706934.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:55.144Z,1516706935.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:55.159Z,1516706935.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:55.533Z,1516706935.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:55.559Z,1516706935.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:55.925Z,1516706935.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:55.964Z,1516706935.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:56.325Z,1516706936.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:56.354Z,1516706936.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:56.725Z,1516706936.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:56.741Z,1516706936.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:57.125Z,1516706937.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:57.145Z,1516706937.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:57.535Z,1516706937.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:57.563Z,1516706937.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:57.960Z,1516706937.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:57.975Z,1516706937.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:58.347Z,1516706938.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:58.380Z,1516706938.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:58.726Z,1516706938.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:58.741Z,1516706938.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:59.136Z,1516706939.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:59.170Z,1516706939.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:59.537Z,1516706939.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:59.573Z,1516706939.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:28:59.930Z,1516706939.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:28:59.945Z,1516706939.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:00.312Z,1516706940.312 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T11:29:00.312Z,1516706940.312 [NAL9602] Data Fault, FailCount= 5 2018-01-23T11:29:00.312Z,1516706940.312 [NAL9602](ERROR): Data Fault 2018-01-23T11:29:00.330Z,1516706940.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:00.360Z,1516706940.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:00.373Z,1516706940.373 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T11:29:00.374Z,1516706940.374 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T11:29:00.708Z,1516706940.708 [NAL9602](INFO): Powering down 2018-01-23T11:29:00.725Z,1516706940.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:00.765Z,1516706940.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:00.789Z,1516706940.789 [CBIT](INFO): Critical error at 20180123T112900 2018-01-23T11:29:01.124Z,1516706941.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:01.151Z,1516706941.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:01.524Z,1516706941.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:01.560Z,1516706941.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:01.928Z,1516706941.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:01.963Z,1516706941.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:02.321Z,1516706942.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:02.337Z,1516706942.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:02.724Z,1516706942.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:02.744Z,1516706942.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:03.132Z,1516706943.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:03.147Z,1516706943.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:03.536Z,1516706943.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:03.551Z,1516706943.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:03.932Z,1516706943.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:03.947Z,1516706943.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:04.330Z,1516706944.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:04.345Z,1516706944.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:04.728Z,1516706944.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:04.747Z,1516706944.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:05.136Z,1516706945.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:05.151Z,1516706945.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:05.533Z,1516706945.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:05.553Z,1516706945.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:05.930Z,1516706945.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:05.945Z,1516706945.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:06.330Z,1516706946.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:06.345Z,1516706946.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:06.731Z,1516706946.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:06.747Z,1516706946.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:07.130Z,1516706947.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:07.145Z,1516706947.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:07.530Z,1516706947.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:07.545Z,1516706947.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:07.930Z,1516706947.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:07.946Z,1516706947.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:08.330Z,1516706948.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:08.345Z,1516706948.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:08.731Z,1516706948.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:08.752Z,1516706948.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:09.132Z,1516706949.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:09.153Z,1516706949.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:09.531Z,1516706949.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:09.546Z,1516706949.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:09.928Z,1516706949.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:09.960Z,1516706949.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:10.330Z,1516706950.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:10.346Z,1516706950.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:10.731Z,1516706950.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:10.746Z,1516706950.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:11.131Z,1516706951.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:11.146Z,1516706951.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:11.533Z,1516706951.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:11.548Z,1516706951.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:11.931Z,1516706951.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:11.945Z,1516706951.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:12.335Z,1516706952.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:12.349Z,1516706952.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:12.731Z,1516706952.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:12.759Z,1516706952.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:15.823Z,1516706955.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:15.839Z,1516706955.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:15.942Z,1516706955.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:15.966Z,1516706955.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:16.291Z,1516706956.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:16.312Z,1516706956.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:16.698Z,1516706956.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:16.713Z,1516706956.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:17.094Z,1516706957.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:17.109Z,1516706957.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:17.497Z,1516706957.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:17.512Z,1516706957.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:17.895Z,1516706957.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:17.909Z,1516706957.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:18.286Z,1516706958.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:18.307Z,1516706958.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:18.690Z,1516706958.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:18.705Z,1516706958.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.089Z,1516706959.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:19.104Z,1516706959.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.492Z,1516706959.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:19.507Z,1516706959.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.892Z,1516706959.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:19.906Z,1516706959.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.906Z,1516706959.906 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164 2018-01-23T11:29:19.906Z,1516706959.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:29:19.908Z,1516706959.908 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.908Z,1516706959.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 164 2018-01-23T11:29:19.908Z,1516706959.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:29:19.910Z,1516706959.910 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:19.910Z,1516706959.910 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164 2018-01-23T11:29:19.910Z,1516706959.910 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:29:19.922Z,1516706959.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:29:19.922Z,1516706959.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:29:19.922Z,1516706959.922 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:29:20.289Z,1516706960.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:20.325Z,1516706960.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:29:20.325Z,1516706960.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164 2018-01-23T11:29:20.326Z,1516706960.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:29:20.326Z,1516706960.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 164 2018-01-23T11:29:20.326Z,1516706960.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:29:20.326Z,1516706960.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164 2018-01-23T11:29:20.690Z,1516706960.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:20.704Z,1516706960.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:29:20.705Z,1516706960.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:29:20.705Z,1516706960.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:29:20.705Z,1516706960.705 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:29:20.706Z,1516706960.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:29:20.706Z,1516706960.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:29:20.707Z,1516706960.707 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:29:20.707Z,1516706960.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:29:20.707Z,1516706960.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:29:21.092Z,1516706961.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:21.116Z,1516706961.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:29:21.117Z,1516706961.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:21.485Z,1516706961.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:21.525Z,1516706961.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:29:21.526Z,1516706961.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:21.882Z,1516706961.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:21.906Z,1516706961.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:29:21.911Z,1516706961.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:22.282Z,1516706962.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:22.297Z,1516706962.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:29:22.298Z,1516706962.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:22.688Z,1516706962.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:22.728Z,1516706962.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:29:22.729Z,1516706962.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:23.077Z,1516706963.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:23.124Z,1516706963.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:29:23.125Z,1516706963.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:23.481Z,1516706963.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:23.497Z,1516706963.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:29:23.498Z,1516706963.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:23.889Z,1516706963.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:23.904Z,1516706963.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:29:23.905Z,1516706963.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:24.286Z,1516706964.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:24.301Z,1516706964.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:29:24.302Z,1516706964.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:24.684Z,1516706964.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:24.713Z,1516706964.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:29:24.714Z,1516706964.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:25.087Z,1516706965.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:25.096Z,1516706965.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x27402 got:0x65051 2018-01-23T11:29:25.113Z,1516706965.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:29:25.114Z,1516706965.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:25.488Z,1516706965.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:25.502Z,1516706965.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:29:25.504Z,1516706965.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:25.888Z,1516706965.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:25.908Z,1516706965.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:29:25.909Z,1516706965.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:26.289Z,1516706966.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:26.316Z,1516706966.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:29:26.317Z,1516706966.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:26.686Z,1516706966.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:26.696Z,1516706966.696 [PNI_TCM](ERROR): CRC does not match. Expected:0x39390 got:0x13579 2018-01-23T11:29:26.737Z,1516706966.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:29:26.738Z,1516706966.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:27.086Z,1516706967.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:27.112Z,1516706967.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:29:27.113Z,1516706967.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:27.489Z,1516706967.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:27.504Z,1516706967.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:29:27.505Z,1516706967.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:27.887Z,1516706967.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:27.920Z,1516706967.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:29:27.921Z,1516706967.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:28.289Z,1516706968.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:28.298Z,1516706968.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x12962 got:0x17072 2018-01-23T11:29:28.340Z,1516706968.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:29:28.341Z,1516706968.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:28.695Z,1516706968.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:28.709Z,1516706968.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:29:28.710Z,1516706968.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:29.093Z,1516706969.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:29.108Z,1516706969.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:29:29.109Z,1516706969.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:29.488Z,1516706969.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:29.512Z,1516706969.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:29:29.513Z,1516706969.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:29.893Z,1516706969.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:29.909Z,1516706969.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:29:29.910Z,1516706969.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:30.287Z,1516706970.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:30.303Z,1516706970.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:29:30.304Z,1516706970.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:30.690Z,1516706970.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:30.704Z,1516706970.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:29:30.705Z,1516706970.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:31.087Z,1516706971.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:31.113Z,1516706971.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:29:31.114Z,1516706971.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:31.484Z,1516706971.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:31.503Z,1516706971.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:29:31.504Z,1516706971.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:31.890Z,1516706971.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:31.904Z,1516706971.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:29:31.905Z,1516706971.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:32.294Z,1516706972.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:32.309Z,1516706972.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:29:32.310Z,1516706972.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:32.684Z,1516706972.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:32.716Z,1516706972.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:29:32.717Z,1516706972.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:33.090Z,1516706973.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:33.108Z,1516706973.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:29:33.109Z,1516706973.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:33.488Z,1516706973.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:33.514Z,1516706973.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:29:33.515Z,1516706973.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:33.891Z,1516706973.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:33.906Z,1516706973.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:29:33.907Z,1516706973.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:34.287Z,1516706974.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:34.320Z,1516706974.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:29:34.321Z,1516706974.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:34.689Z,1516706974.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:34.708Z,1516706974.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:29:34.709Z,1516706974.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:35.088Z,1516706975.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:35.105Z,1516706975.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:29:35.106Z,1516706975.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:35.490Z,1516706975.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:35.504Z,1516706975.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:29:35.505Z,1516706975.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:35.886Z,1516706975.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:35.921Z,1516706975.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:29:35.922Z,1516706975.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:36.288Z,1516706976.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:36.307Z,1516706976.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:29:36.308Z,1516706976.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:36.688Z,1516706976.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:36.705Z,1516706976.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:29:36.706Z,1516706976.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:37.093Z,1516706977.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:37.108Z,1516706977.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:29:37.109Z,1516706977.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:37.484Z,1516706977.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:37.519Z,1516706977.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:29:37.520Z,1516706977.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:37.890Z,1516706977.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:37.908Z,1516706977.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:29:37.909Z,1516706977.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:38.292Z,1516706978.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:38.309Z,1516706978.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:29:38.310Z,1516706978.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:38.686Z,1516706978.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:38.702Z,1516706978.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:29:38.703Z,1516706978.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:39.087Z,1516706979.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:39.114Z,1516706979.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:29:39.116Z,1516706979.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:39.491Z,1516706979.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:39.509Z,1516706979.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:29:39.511Z,1516706979.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:39.886Z,1516706979.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:39.905Z,1516706979.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:29:39.906Z,1516706979.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:40.289Z,1516706980.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:40.312Z,1516706980.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:40.691Z,1516706980.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:40.737Z,1516706980.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:41.086Z,1516706981.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:41.101Z,1516706981.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:41.487Z,1516706981.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:41.509Z,1516706981.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:41.893Z,1516706981.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:41.917Z,1516706981.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:42.287Z,1516706982.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:42.339Z,1516706982.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:42.687Z,1516706982.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:42.702Z,1516706982.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:43.086Z,1516706983.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:43.111Z,1516706983.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:43.487Z,1516706983.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:43.506Z,1516706983.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:43.887Z,1516706983.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:43.939Z,1516706983.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:44.289Z,1516706984.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:44.304Z,1516706984.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:44.688Z,1516706984.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:44.705Z,1516706984.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:45.088Z,1516706985.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:45.107Z,1516706985.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:45.486Z,1516706985.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:45.509Z,1516706985.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:45.888Z,1516706985.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:45.903Z,1516706985.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:46.288Z,1516706986.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:46.305Z,1516706986.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:46.686Z,1516706986.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:46.711Z,1516706986.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:47.087Z,1516706987.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:47.121Z,1516706987.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:47.492Z,1516706987.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:47.507Z,1516706987.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:47.888Z,1516706987.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:47.903Z,1516706987.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:48.288Z,1516706988.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:48.307Z,1516706988.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:48.689Z,1516706988.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:48.704Z,1516706988.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:49.088Z,1516706989.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:49.103Z,1516706989.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:49.488Z,1516706989.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:49.503Z,1516706989.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:49.888Z,1516706989.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:49.910Z,1516706989.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:50.283Z,1516706990.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:50.300Z,1516706990.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:50.687Z,1516706990.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:50.703Z,1516706990.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:51.094Z,1516706991.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:51.111Z,1516706991.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:51.484Z,1516706991.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:51.500Z,1516706991.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:51.887Z,1516706991.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:51.902Z,1516706991.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:52.287Z,1516706992.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:52.301Z,1516706992.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:52.684Z,1516706992.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:52.699Z,1516706992.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:53.087Z,1516706993.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:53.102Z,1516706993.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:53.487Z,1516706993.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:53.501Z,1516706993.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:53.888Z,1516706993.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:53.908Z,1516706993.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:54.287Z,1516706994.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:54.302Z,1516706994.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:54.687Z,1516706994.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:54.712Z,1516706994.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:55.091Z,1516706995.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:55.106Z,1516706995.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:55.487Z,1516706995.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:55.502Z,1516706995.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:55.888Z,1516706995.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:55.908Z,1516706995.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:56.277Z,1516706996.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:56.303Z,1516706996.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:56.691Z,1516706996.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:56.706Z,1516706996.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:57.088Z,1516706997.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:57.108Z,1516706997.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:57.477Z,1516706997.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:57.512Z,1516706997.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:57.891Z,1516706997.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:57.907Z,1516706997.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:58.288Z,1516706998.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:58.308Z,1516706998.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:58.688Z,1516706998.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:58.702Z,1516706998.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:59.088Z,1516706999.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:59.103Z,1516706999.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:59.489Z,1516706999.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:59.508Z,1516706999.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:29:59.892Z,1516706999.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:29:59.907Z,1516706999.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:00.287Z,1516707000.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:00.307Z,1516707000.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:00.688Z,1516707000.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:00.708Z,1516707000.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:01.090Z,1516707001.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:01.105Z,1516707001.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:01.488Z,1516707001.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:01.503Z,1516707001.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:01.888Z,1516707001.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:01.908Z,1516707001.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:02.277Z,1516707002.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:02.309Z,1516707002.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:02.680Z,1516707002.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:02.711Z,1516707002.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:03.080Z,1516707003.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:03.094Z,1516707003.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:03.480Z,1516707003.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:03.494Z,1516707003.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:03.884Z,1516707003.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:03.899Z,1516707003.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:04.292Z,1516707004.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:04.306Z,1516707004.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:04.685Z,1516707004.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:04.700Z,1516707004.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:05.084Z,1516707005.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:05.103Z,1516707005.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:05.487Z,1516707005.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:05.505Z,1516707005.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:05.887Z,1516707005.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:05.902Z,1516707005.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:06.288Z,1516707006.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:06.303Z,1516707006.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:06.687Z,1516707006.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:06.705Z,1516707006.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:07.087Z,1516707007.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:07.101Z,1516707007.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:07.487Z,1516707007.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:07.502Z,1516707007.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:07.882Z,1516707007.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:07.913Z,1516707007.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:08.284Z,1516707008.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:08.300Z,1516707008.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:08.684Z,1516707008.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:08.707Z,1516707008.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:09.087Z,1516707009.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:09.109Z,1516707009.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:09.484Z,1516707009.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:09.500Z,1516707009.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:09.886Z,1516707009.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:09.919Z,1516707009.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:10.287Z,1516707010.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:10.309Z,1516707010.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:10.677Z,1516707010.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:10.712Z,1516707010.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:11.084Z,1516707011.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:11.106Z,1516707011.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:11.487Z,1516707011.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:11.509Z,1516707011.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:11.887Z,1516707011.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:11.902Z,1516707011.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:12.284Z,1516707012.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:12.306Z,1516707012.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:12.683Z,1516707012.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:12.706Z,1516707012.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:13.089Z,1516707013.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:13.108Z,1516707013.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:16.200Z,1516707016.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:16.216Z,1516707016.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:16.320Z,1516707016.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:16.357Z,1516707016.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:16.668Z,1516707016.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:16.704Z,1516707016.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:17.076Z,1516707017.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:17.103Z,1516707017.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:17.468Z,1516707017.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:17.491Z,1516707017.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:17.868Z,1516707017.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:17.911Z,1516707017.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:18.272Z,1516707018.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:18.307Z,1516707018.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:18.668Z,1516707018.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:18.683Z,1516707018.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:19.076Z,1516707019.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:19.090Z,1516707019.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:19.473Z,1516707019.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:19.489Z,1516707019.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:19.880Z,1516707019.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:19.895Z,1516707019.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:20.276Z,1516707020.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:20.296Z,1516707020.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:20.673Z,1516707020.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:20.689Z,1516707020.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:21.074Z,1516707021.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:21.089Z,1516707021.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:21.472Z,1516707021.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:21.499Z,1516707021.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:21.877Z,1516707021.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:21.893Z,1516707021.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:22.274Z,1516707022.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:22.289Z,1516707022.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:22.679Z,1516707022.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:22.693Z,1516707022.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:23.072Z,1516707023.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:23.093Z,1516707023.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:23.480Z,1516707023.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:23.495Z,1516707023.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:23.882Z,1516707023.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:23.897Z,1516707023.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:24.274Z,1516707024.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:24.298Z,1516707024.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:24.679Z,1516707024.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:24.694Z,1516707024.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:25.076Z,1516707025.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:25.091Z,1516707025.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:25.474Z,1516707025.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:25.497Z,1516707025.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:25.875Z,1516707025.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:25.890Z,1516707025.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:26.275Z,1516707026.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:26.296Z,1516707026.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:26.671Z,1516707026.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:26.687Z,1516707026.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:27.075Z,1516707027.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:27.091Z,1516707027.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:27.475Z,1516707027.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:27.490Z,1516707027.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:27.875Z,1516707027.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:27.890Z,1516707027.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:28.274Z,1516707028.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:28.289Z,1516707028.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:28.675Z,1516707028.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:28.689Z,1516707028.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:29.074Z,1516707029.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:29.096Z,1516707029.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:29.475Z,1516707029.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:29.490Z,1516707029.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:29.871Z,1516707029.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:29.900Z,1516707029.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:30.278Z,1516707030.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:30.293Z,1516707030.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:30.675Z,1516707030.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:30.690Z,1516707030.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:31.075Z,1516707031.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:31.089Z,1516707031.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:31.475Z,1516707031.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:31.490Z,1516707031.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:31.874Z,1516707031.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:31.889Z,1516707031.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:32.275Z,1516707032.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:32.296Z,1516707032.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:32.672Z,1516707032.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:32.687Z,1516707032.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:33.075Z,1516707033.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:33.090Z,1516707033.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:33.475Z,1516707033.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:33.489Z,1516707033.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:33.874Z,1516707033.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:33.889Z,1516707033.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:34.275Z,1516707034.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:34.290Z,1516707034.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:34.671Z,1516707034.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:34.700Z,1516707034.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:35.075Z,1516707035.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:35.090Z,1516707035.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:35.475Z,1516707035.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:35.490Z,1516707035.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:35.875Z,1516707035.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:35.896Z,1516707035.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:36.275Z,1516707036.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:36.290Z,1516707036.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:36.675Z,1516707036.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:36.690Z,1516707036.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:37.075Z,1516707037.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:37.090Z,1516707037.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:37.477Z,1516707037.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:37.491Z,1516707037.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:37.881Z,1516707037.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:37.896Z,1516707037.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:38.288Z,1516707038.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:38.302Z,1516707038.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:38.674Z,1516707038.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:38.688Z,1516707038.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:39.077Z,1516707039.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:39.092Z,1516707039.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:39.482Z,1516707039.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:39.504Z,1516707039.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:39.879Z,1516707039.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:39.894Z,1516707039.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:40.280Z,1516707040.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:40.295Z,1516707040.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:40.676Z,1516707040.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:40.691Z,1516707040.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:41.076Z,1516707041.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:41.092Z,1516707041.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:41.476Z,1516707041.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:41.491Z,1516707041.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:41.881Z,1516707041.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:41.896Z,1516707041.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:42.281Z,1516707042.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:42.296Z,1516707042.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:42.676Z,1516707042.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:42.691Z,1516707042.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:43.076Z,1516707043.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:43.090Z,1516707043.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:43.476Z,1516707043.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:43.491Z,1516707043.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:43.876Z,1516707043.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:43.891Z,1516707043.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:44.276Z,1516707044.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:44.296Z,1516707044.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:44.673Z,1516707044.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:44.687Z,1516707044.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:45.076Z,1516707045.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:45.090Z,1516707045.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:45.475Z,1516707045.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:45.490Z,1516707045.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:45.875Z,1516707045.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:45.896Z,1516707045.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:46.275Z,1516707046.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:46.290Z,1516707046.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:46.675Z,1516707046.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:46.697Z,1516707046.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:47.078Z,1516707047.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:47.093Z,1516707047.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:47.479Z,1516707047.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:47.494Z,1516707047.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:47.875Z,1516707047.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:47.889Z,1516707047.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:48.275Z,1516707048.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:48.290Z,1516707048.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:48.682Z,1516707048.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:48.697Z,1516707048.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:49.075Z,1516707049.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:49.096Z,1516707049.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:49.472Z,1516707049.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:49.487Z,1516707049.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:49.872Z,1516707049.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:49.893Z,1516707049.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:50.275Z,1516707050.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:50.290Z,1516707050.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:50.672Z,1516707050.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:50.687Z,1516707050.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:51.074Z,1516707051.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:51.093Z,1516707051.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:51.474Z,1516707051.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:51.493Z,1516707051.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:51.876Z,1516707051.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:51.890Z,1516707051.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:52.281Z,1516707052.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:52.309Z,1516707052.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:52.697Z,1516707052.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:52.737Z,1516707052.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:53.077Z,1516707053.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:53.116Z,1516707053.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:53.481Z,1516707053.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:53.501Z,1516707053.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:53.874Z,1516707053.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:53.908Z,1516707053.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:54.269Z,1516707054.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:54.313Z,1516707054.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:54.674Z,1516707054.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:54.708Z,1516707054.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:55.074Z,1516707055.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:55.103Z,1516707055.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:55.469Z,1516707055.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:55.537Z,1516707055.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:55.874Z,1516707055.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:55.908Z,1516707055.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:56.272Z,1516707056.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:56.305Z,1516707056.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:56.668Z,1516707056.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:56.694Z,1516707056.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:57.068Z,1516707057.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:57.099Z,1516707057.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:57.468Z,1516707057.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:57.483Z,1516707057.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:57.868Z,1516707057.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:57.882Z,1516707057.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:58.272Z,1516707058.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:58.309Z,1516707058.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:58.676Z,1516707058.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:58.691Z,1516707058.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:59.072Z,1516707059.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:59.087Z,1516707059.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:59.474Z,1516707059.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:59.497Z,1516707059.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:30:59.887Z,1516707059.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:30:59.902Z,1516707059.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:00.269Z,1516707060.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:00.320Z,1516707060.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:00.361Z,1516707060.361 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T11:31:00.361Z,1516707060.361 [NAL9602] No Fault, FailCount= 5 2018-01-23T11:31:00.656Z,1516707060.656 [NAL9602](INFO): Powering up NAL9602 2018-01-23T11:31:00.688Z,1516707060.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:00.713Z,1516707060.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:01.071Z,1516707061.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:01.121Z,1516707061.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:01.474Z,1516707061.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:01.517Z,1516707061.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:01.882Z,1516707061.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:01.901Z,1516707061.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:02.295Z,1516707062.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:02.339Z,1516707062.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:02.698Z,1516707062.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:02.734Z,1516707062.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:03.081Z,1516707063.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:03.097Z,1516707063.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:03.476Z,1516707063.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:03.528Z,1516707063.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:03.878Z,1516707063.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:03.892Z,1516707063.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:04.277Z,1516707064.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:04.292Z,1516707064.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:04.690Z,1516707064.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:04.718Z,1516707064.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:05.068Z,1516707065.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:05.164Z,1516707065.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:05.474Z,1516707065.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:05.520Z,1516707065.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:05.882Z,1516707065.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:05.925Z,1516707065.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:06.278Z,1516707066.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:06.336Z,1516707066.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:06.675Z,1516707066.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:06.728Z,1516707066.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:07.082Z,1516707067.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:07.137Z,1516707067.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:07.476Z,1516707067.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:07.525Z,1516707067.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:07.882Z,1516707067.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:07.905Z,1516707067.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:08.274Z,1516707068.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:08.309Z,1516707068.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:08.670Z,1516707068.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:08.743Z,1516707068.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:09.070Z,1516707069.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:09.109Z,1516707069.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:09.474Z,1516707069.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:09.513Z,1516707069.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:09.874Z,1516707069.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:09.921Z,1516707069.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:10.274Z,1516707070.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:10.313Z,1516707070.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:10.674Z,1516707070.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:10.721Z,1516707070.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:11.086Z,1516707071.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:11.141Z,1516707071.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:11.497Z,1516707071.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:11.530Z,1516707071.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:11.872Z,1516707071.872 [NAL9602](INFO): NAL9602 initialized 2018-01-23T11:31:11.891Z,1516707071.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:11.926Z,1516707071.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:12.282Z,1516707072.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:12.348Z,1516707072.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:12.680Z,1516707072.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:12.705Z,1516707072.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:13.092Z,1516707073.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:13.113Z,1516707073.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:13.493Z,1516707073.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:13.520Z,1516707073.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:17.344Z,1516707077.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:17.360Z,1516707077.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:17.468Z,1516707077.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:17.501Z,1516707077.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:17.836Z,1516707077.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:17.863Z,1516707077.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:18.253Z,1516707078.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:18.267Z,1516707078.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:18.632Z,1516707078.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:18.665Z,1516707078.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:19.025Z,1516707079.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:19.063Z,1516707079.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:19.420Z,1516707079.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:19.468Z,1516707079.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:19.823Z,1516707079.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:19.838Z,1516707079.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:20.228Z,1516707080.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:20.259Z,1516707080.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:20.640Z,1516707080.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:20.655Z,1516707080.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:21.042Z,1516707081.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:21.057Z,1516707081.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:21.439Z,1516707081.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:21.454Z,1516707081.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:21.820Z,1516707081.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:21.853Z,1516707081.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:22.220Z,1516707082.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:22.253Z,1516707082.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:22.621Z,1516707082.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:22.653Z,1516707082.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:23.020Z,1516707083.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:23.049Z,1516707083.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:23.436Z,1516707083.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:23.457Z,1516707083.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:23.843Z,1516707083.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:23.858Z,1516707083.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:24.238Z,1516707084.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:24.253Z,1516707084.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:24.620Z,1516707084.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:24.653Z,1516707084.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:25.020Z,1516707085.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:25.053Z,1516707085.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:25.424Z,1516707085.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:25.459Z,1516707085.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:25.825Z,1516707085.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:25.860Z,1516707085.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:26.220Z,1516707086.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:26.257Z,1516707086.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:26.631Z,1516707086.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:26.666Z,1516707086.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:27.044Z,1516707087.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:27.059Z,1516707087.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:27.432Z,1516707087.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:27.465Z,1516707087.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:27.820Z,1516707087.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:27.858Z,1516707087.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:28.220Z,1516707088.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:28.257Z,1516707088.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:28.621Z,1516707088.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:28.652Z,1516707088.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:29.020Z,1516707089.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:29.065Z,1516707089.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:29.431Z,1516707089.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:29.465Z,1516707089.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:29.835Z,1516707089.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:29.868Z,1516707089.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:30.231Z,1516707090.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:30.258Z,1516707090.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:30.618Z,1516707090.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:30.633Z,1516707090.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:31.020Z,1516707091.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:31.041Z,1516707091.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:31.429Z,1516707091.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:31.459Z,1516707091.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:31.826Z,1516707091.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:31.845Z,1516707091.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:32.225Z,1516707092.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:32.244Z,1516707092.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:32.631Z,1516707092.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:32.646Z,1516707092.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:33.044Z,1516707093.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:33.058Z,1516707093.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:33.433Z,1516707093.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:33.453Z,1516707093.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:33.832Z,1516707093.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:33.847Z,1516707093.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:34.229Z,1516707094.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:34.244Z,1516707094.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:34.624Z,1516707094.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:34.657Z,1516707094.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:35.032Z,1516707095.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:35.047Z,1516707095.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:35.436Z,1516707095.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:35.463Z,1516707095.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:35.842Z,1516707095.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:35.865Z,1516707095.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:36.240Z,1516707096.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:36.255Z,1516707096.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:36.618Z,1516707096.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:36.667Z,1516707096.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:37.037Z,1516707097.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:37.052Z,1516707097.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:37.438Z,1516707097.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:37.453Z,1516707097.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:37.829Z,1516707097.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:37.850Z,1516707097.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:38.223Z,1516707098.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:38.257Z,1516707098.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:38.640Z,1516707098.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:38.655Z,1516707098.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:39.044Z,1516707099.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:39.058Z,1516707099.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:39.440Z,1516707099.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:39.454Z,1516707099.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:39.831Z,1516707099.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:39.846Z,1516707099.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:40.224Z,1516707100.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:40.257Z,1516707100.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:40.635Z,1516707100.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:40.650Z,1516707100.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:41.020Z,1516707101.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:41.057Z,1516707101.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:41.436Z,1516707101.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:41.465Z,1516707101.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:41.848Z,1516707101.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:41.869Z,1516707101.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:42.244Z,1516707102.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:42.259Z,1516707102.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:42.620Z,1516707102.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:42.674Z,1516707102.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:43.020Z,1516707103.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:43.046Z,1516707103.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:43.420Z,1516707103.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:43.454Z,1516707103.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:43.821Z,1516707103.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:43.852Z,1516707103.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:44.219Z,1516707104.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:44.246Z,1516707104.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:44.638Z,1516707104.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:44.660Z,1516707104.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:45.047Z,1516707105.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:45.062Z,1516707105.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:45.436Z,1516707105.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:45.457Z,1516707105.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:45.826Z,1516707105.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:45.856Z,1516707105.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:46.225Z,1516707106.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:46.251Z,1516707106.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:46.621Z,1516707106.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:46.653Z,1516707106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:47.020Z,1516707107.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:47.056Z,1516707107.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:47.436Z,1516707107.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:47.466Z,1516707107.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:47.840Z,1516707107.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:47.861Z,1516707107.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:48.234Z,1516707108.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:48.266Z,1516707108.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:48.620Z,1516707108.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:48.665Z,1516707108.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:49.020Z,1516707109.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:49.057Z,1516707109.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:49.420Z,1516707109.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:49.458Z,1516707109.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:49.825Z,1516707109.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:49.857Z,1516707109.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:50.220Z,1516707110.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:50.257Z,1516707110.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:50.631Z,1516707110.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:50.667Z,1516707110.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:51.031Z,1516707111.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:51.065Z,1516707111.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:51.431Z,1516707111.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:51.465Z,1516707111.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:51.820Z,1516707111.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:51.858Z,1516707111.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:52.224Z,1516707112.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:52.257Z,1516707112.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:52.621Z,1516707112.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:52.652Z,1516707112.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:53.028Z,1516707113.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:53.062Z,1516707113.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:53.431Z,1516707113.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:53.469Z,1516707113.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:53.852Z,1516707113.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:53.867Z,1516707113.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:54.235Z,1516707114.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:54.271Z,1516707114.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:54.619Z,1516707114.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:54.634Z,1516707114.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:55.022Z,1516707115.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:55.041Z,1516707115.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:55.429Z,1516707115.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:55.444Z,1516707115.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:55.826Z,1516707115.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:55.865Z,1516707115.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:56.230Z,1516707116.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:56.269Z,1516707116.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:56.637Z,1516707116.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:56.652Z,1516707116.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:57.037Z,1516707117.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:57.052Z,1516707117.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:57.432Z,1516707117.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:57.448Z,1516707117.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:57.828Z,1516707117.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:57.846Z,1516707117.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:58.228Z,1516707118.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:58.244Z,1516707118.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:58.626Z,1516707118.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:58.649Z,1516707118.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:59.029Z,1516707119.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:59.044Z,1516707119.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:59.433Z,1516707119.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:59.449Z,1516707119.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:31:59.835Z,1516707119.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:31:59.857Z,1516707119.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:00.235Z,1516707120.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:00.256Z,1516707120.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:00.632Z,1516707120.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:00.648Z,1516707120.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:01.028Z,1516707121.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:01.043Z,1516707121.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:01.434Z,1516707121.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:01.456Z,1516707121.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:01.834Z,1516707121.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:01.849Z,1516707121.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:02.234Z,1516707122.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:02.249Z,1516707122.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:02.625Z,1516707122.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:02.652Z,1516707122.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:03.024Z,1516707123.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:03.055Z,1516707123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:03.442Z,1516707123.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:03.457Z,1516707123.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:03.843Z,1516707123.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:03.864Z,1516707123.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:04.240Z,1516707124.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:04.261Z,1516707124.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:04.621Z,1516707124.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:04.653Z,1516707124.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:05.021Z,1516707125.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:05.057Z,1516707125.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:05.438Z,1516707125.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:05.461Z,1516707125.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:05.843Z,1516707125.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:05.869Z,1516707125.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:06.244Z,1516707126.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:06.270Z,1516707126.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:06.629Z,1516707126.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:06.645Z,1516707126.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:07.027Z,1516707127.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:07.049Z,1516707127.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:07.444Z,1516707127.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:07.475Z,1516707127.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:07.839Z,1516707127.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:07.871Z,1516707127.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:08.235Z,1516707128.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:08.250Z,1516707128.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:08.628Z,1516707128.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:08.651Z,1516707128.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:09.028Z,1516707129.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:09.043Z,1516707129.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:09.448Z,1516707129.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:09.478Z,1516707129.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:09.835Z,1516707129.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:09.851Z,1516707129.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:10.234Z,1516707130.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:10.249Z,1516707130.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:10.625Z,1516707130.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:10.673Z,1516707130.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:11.033Z,1516707131.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:11.049Z,1516707131.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:11.434Z,1516707131.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:11.449Z,1516707131.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:11.835Z,1516707131.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:11.850Z,1516707131.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:12.234Z,1516707132.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:12.250Z,1516707132.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:12.253Z,1516707132.253 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:32:12.253Z,1516707132.253 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:32:12.253Z,1516707132.253 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:32:12.253Z,1516707132.253 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:32:12.624Z,1516707132.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:12.651Z,1516707132.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:12.654Z,1516707132.654 [Default:CheckIn:D] Stopped 2018-01-23T11:32:12.654Z,1516707132.654 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:32:13.024Z,1516707133.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:13.046Z,1516707133.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:13.050Z,1516707133.050 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 494.343229 min 2018-01-23T11:32:13.050Z,1516707133.050 [Default:CheckIn:E] Stopped 2018-01-23T11:32:13.050Z,1516707133.050 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:32:13.050Z,1516707133.050 [Default:CheckIn] Stopped 2018-01-23T11:32:13.050Z,1516707133.050 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:32:13.051Z,1516707133.051 [Default:CheckIn](INFO): Running loop #49 2018-01-23T11:32:13.051Z,1516707133.051 [Default:CheckIn] Running Loop=49 2018-01-23T11:32:13.051Z,1516707133.051 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:32:13.051Z,1516707133.051 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:32:13.438Z,1516707133.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:13.469Z,1516707133.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:13.845Z,1516707133.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:13.865Z,1516707133.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:16.937Z,1516707136.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:16.956Z,1516707136.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:17.062Z,1516707137.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:17.097Z,1516707137.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:17.409Z,1516707137.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:17.424Z,1516707137.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:17.806Z,1516707137.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:17.821Z,1516707137.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:18.204Z,1516707138.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:18.220Z,1516707138.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:18.608Z,1516707138.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:18.623Z,1516707138.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:19.012Z,1516707139.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:19.032Z,1516707139.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:19.420Z,1516707139.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:19.451Z,1516707139.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:19.805Z,1516707139.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:19.820Z,1516707139.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:20.205Z,1516707140.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:20.220Z,1516707140.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:20.604Z,1516707140.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:20.623Z,1516707140.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:21.010Z,1516707141.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:21.029Z,1516707141.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:21.029Z,1516707141.029 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165 2018-01-23T11:32:21.029Z,1516707141.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:32:21.032Z,1516707141.032 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:21.032Z,1516707141.032 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 165 2018-01-23T11:32:21.032Z,1516707141.032 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:32:21.033Z,1516707141.033 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:21.033Z,1516707141.033 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165 2018-01-23T11:32:21.034Z,1516707141.034 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:32:21.074Z,1516707141.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:32:21.074Z,1516707141.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:32:21.074Z,1516707141.074 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:32:21.416Z,1516707141.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:21.441Z,1516707141.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:32:21.441Z,1516707141.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165 2018-01-23T11:32:21.442Z,1516707141.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:32:21.442Z,1516707141.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 165 2018-01-23T11:32:21.442Z,1516707141.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:32:21.442Z,1516707141.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165 2018-01-23T11:32:21.819Z,1516707141.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:21.833Z,1516707141.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:32:21.833Z,1516707141.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:32:21.834Z,1516707141.834 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:32:21.834Z,1516707141.834 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:32:21.834Z,1516707141.834 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:32:21.835Z,1516707141.835 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:32:21.835Z,1516707141.835 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:32:21.836Z,1516707141.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:32:21.836Z,1516707141.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:32:22.216Z,1516707142.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:22.242Z,1516707142.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:32:22.247Z,1516707142.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:22.605Z,1516707142.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:22.632Z,1516707142.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:32:22.633Z,1516707142.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:23.000Z,1516707143.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:23.026Z,1516707143.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:32:23.027Z,1516707143.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:23.415Z,1516707143.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:23.430Z,1516707143.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:32:23.431Z,1516707143.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:23.819Z,1516707143.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:23.834Z,1516707143.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:32:23.835Z,1516707143.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:24.215Z,1516707144.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:24.230Z,1516707144.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:32:24.247Z,1516707144.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:24.600Z,1516707144.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:24.622Z,1516707144.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:32:24.628Z,1516707144.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:25.009Z,1516707145.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:25.024Z,1516707145.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:32:25.025Z,1516707145.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:25.401Z,1516707145.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:25.420Z,1516707145.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:32:25.421Z,1516707145.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:25.816Z,1516707145.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:25.830Z,1516707145.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:32:25.831Z,1516707145.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:26.215Z,1516707146.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:26.229Z,1516707146.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:32:26.230Z,1516707146.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:26.615Z,1516707146.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:26.629Z,1516707146.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:32:26.630Z,1516707146.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:26.000Z,1516707147.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:27.022Z,1516707147.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:32:27.023Z,1516707147.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:27.409Z,1516707147.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:27.424Z,1516707147.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:32:27.425Z,1516707147.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:27.813Z,1516707147.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:27.832Z,1516707147.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:32:27.833Z,1516707147.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:28.203Z,1516707148.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:28.224Z,1516707148.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:32:28.225Z,1516707148.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:28.616Z,1516707148.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:28.630Z,1516707148.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:32:28.631Z,1516707148.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:29.015Z,1516707149.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:29.030Z,1516707149.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:32:29.031Z,1516707149.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:29.427Z,1516707149.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:29.442Z,1516707149.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:32:29.463Z,1516707149.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:29.803Z,1516707149.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:29.833Z,1516707149.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:32:29.834Z,1516707149.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:30.199Z,1516707150.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:30.232Z,1516707150.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:32:30.233Z,1516707150.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:30.611Z,1516707150.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:30.625Z,1516707150.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:32:30.626Z,1516707150.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:31.011Z,1516707151.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:31.026Z,1516707151.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:32:31.027Z,1516707151.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:31.408Z,1516707151.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:31.423Z,1516707151.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:32:31.424Z,1516707151.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:31.814Z,1516707151.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:31.837Z,1516707151.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:32:31.838Z,1516707151.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:32.221Z,1516707152.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:32.248Z,1516707152.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:32:32.249Z,1516707152.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:32.620Z,1516707152.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:32.635Z,1516707152.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:32:32.636Z,1516707152.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:32.997Z,1516707152.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:33.030Z,1516707153.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:32:33.031Z,1516707153.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:33.415Z,1516707153.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:33.429Z,1516707153.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:32:33.430Z,1516707153.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:33.813Z,1516707153.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:33.828Z,1516707153.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:32:33.829Z,1516707153.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:34.217Z,1516707154.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:34.236Z,1516707154.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:32:34.237Z,1516707154.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:34.620Z,1516707154.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:34.635Z,1516707154.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:32:34.636Z,1516707154.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:35.019Z,1516707155.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:35.040Z,1516707155.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:32:35.041Z,1516707155.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:35.416Z,1516707155.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:35.432Z,1516707155.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:32:35.433Z,1516707155.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:35.813Z,1516707155.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:35.827Z,1516707155.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:32:35.828Z,1516707155.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:36.209Z,1516707156.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:36.228Z,1516707156.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:32:36.229Z,1516707156.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:36.596Z,1516707156.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:36.632Z,1516707156.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:32:36.633Z,1516707156.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:36.999Z,1516707156.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:37.026Z,1516707157.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:32:37.027Z,1516707157.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:37.397Z,1516707157.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:37.432Z,1516707157.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:32:37.433Z,1516707157.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:37.823Z,1516707157.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:37.838Z,1516707157.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:32:37.839Z,1516707157.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:38.220Z,1516707158.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:38.234Z,1516707158.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:32:38.235Z,1516707158.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:38.613Z,1516707158.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:38.634Z,1516707158.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:32:38.636Z,1516707158.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:38.999Z,1516707158.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:39.032Z,1516707159.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:32:39.033Z,1516707159.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:39.404Z,1516707159.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:39.431Z,1516707159.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:32:39.432Z,1516707159.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:39.797Z,1516707159.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:39.828Z,1516707159.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:32:39.829Z,1516707159.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:40.198Z,1516707160.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:40.232Z,1516707160.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:32:40.233Z,1516707160.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:40.611Z,1516707160.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:40.636Z,1516707160.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:32:40.637Z,1516707160.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:41.023Z,1516707161.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:41.038Z,1516707161.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:41.426Z,1516707161.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:41.441Z,1516707161.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:41.798Z,1516707161.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:41.829Z,1516707161.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:42.198Z,1516707162.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:42.225Z,1516707162.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:42.598Z,1516707162.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:42.613Z,1516707162.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:43.005Z,1516707163.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:43.046Z,1516707163.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:43.394Z,1516707163.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:43.440Z,1516707163.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:43.808Z,1516707163.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:43.816Z,1516707163.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x26206 got:0x13559 2018-01-23T11:32:43.845Z,1516707163.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:44.211Z,1516707164.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:44.246Z,1516707164.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:44.607Z,1516707164.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:44.641Z,1516707164.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:45.006Z,1516707165.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:45.022Z,1516707165.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:45.406Z,1516707165.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:45.421Z,1516707165.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:45.809Z,1516707165.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:45.828Z,1516707165.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:46.206Z,1516707166.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:46.221Z,1516707166.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:46.609Z,1516707166.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:46.625Z,1516707166.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:47.013Z,1516707167.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:47.033Z,1516707167.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:47.415Z,1516707167.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:47.430Z,1516707167.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:47.809Z,1516707167.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:47.824Z,1516707167.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:48.205Z,1516707168.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:48.223Z,1516707168.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:48.606Z,1516707168.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:48.636Z,1516707168.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:49.009Z,1516707169.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:49.024Z,1516707169.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:49.406Z,1516707169.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:49.422Z,1516707169.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:49.811Z,1516707169.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:49.840Z,1516707169.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:50.222Z,1516707170.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:50.237Z,1516707170.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:50.612Z,1516707170.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:50.645Z,1516707170.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:51.002Z,1516707171.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:51.029Z,1516707171.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:51.396Z,1516707171.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:51.433Z,1516707171.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:51.802Z,1516707171.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:51.823Z,1516707171.823 [PNI_TCM](ERROR): CRC does not match. Expected:0x10171 got:0x7618 2018-01-23T11:32:51.849Z,1516707171.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:52.202Z,1516707172.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:52.228Z,1516707172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:52.627Z,1516707172.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:52.642Z,1516707172.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:53.027Z,1516707173.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:53.042Z,1516707173.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:53.423Z,1516707173.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:53.438Z,1516707173.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:53.798Z,1516707173.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:53.833Z,1516707173.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:54.213Z,1516707174.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:54.228Z,1516707174.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:54.597Z,1516707174.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:54.645Z,1516707174.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:55.002Z,1516707175.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:55.025Z,1516707175.025 [PNI_TCM](ERROR): CRC does not match. Expected:0x11142 got:0x27161 2018-01-23T11:32:55.045Z,1516707175.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:55.396Z,1516707175.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:55.429Z,1516707175.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:55.817Z,1516707175.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:55.837Z,1516707175.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:56.222Z,1516707176.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:56.238Z,1516707176.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:56.612Z,1516707176.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:56.644Z,1516707176.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:56.996Z,1516707176.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:57.027Z,1516707177.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:57.399Z,1516707177.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:57.435Z,1516707177.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:57.801Z,1516707177.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:57.849Z,1516707177.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:58.200Z,1516707178.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:58.223Z,1516707178.223 [PNI_TCM](ERROR): CRC does not match. Expected:0x53219 got:0x33972 2018-01-23T11:32:58.249Z,1516707178.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:58.622Z,1516707178.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:58.637Z,1516707178.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:59.024Z,1516707179.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:59.039Z,1516707179.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:59.415Z,1516707179.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:59.449Z,1516707179.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:32:59.800Z,1516707179.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:32:59.824Z,1516707179.824 [PNI_TCM](ERROR): CRC does not match. Expected:0x20643 got:0x39704 2018-01-23T11:32:59.841Z,1516707179.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:00.196Z,1516707180.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:00.233Z,1516707180.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:00.598Z,1516707180.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:00.618Z,1516707180.618 [PNI_TCM](ERROR): CRC does not match. Expected:0x46892 got:0x49432 2018-01-23T11:33:00.670Z,1516707180.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:00.997Z,1516707180.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:01.033Z,1516707181.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:01.395Z,1516707181.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:01.424Z,1516707181.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:01.808Z,1516707181.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:01.837Z,1516707181.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:02.228Z,1516707182.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:02.243Z,1516707182.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:02.607Z,1516707182.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:02.649Z,1516707182.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:02.997Z,1516707182.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:03.036Z,1516707183.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:03.396Z,1516707183.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:03.436Z,1516707183.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:03.803Z,1516707183.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:03.831Z,1516707183.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:04.196Z,1516707184.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:04.235Z,1516707184.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:04.607Z,1516707184.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:04.648Z,1516707184.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:05.017Z,1516707185.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:05.043Z,1516707185.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:05.417Z,1516707185.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:05.447Z,1516707185.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:05.805Z,1516707185.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:05.831Z,1516707185.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:06.202Z,1516707186.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:06.217Z,1516707186.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:06.601Z,1516707186.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:06.637Z,1516707186.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:07.007Z,1516707187.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:07.024Z,1516707187.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:07.398Z,1516707187.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:07.446Z,1516707187.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:07.819Z,1516707187.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:07.847Z,1516707187.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:08.220Z,1516707188.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:08.248Z,1516707188.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:08.613Z,1516707188.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:08.645Z,1516707188.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:09.009Z,1516707189.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:09.052Z,1516707189.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:09.407Z,1516707189.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:09.421Z,1516707189.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:09.803Z,1516707189.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:09.829Z,1516707189.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:10.203Z,1516707190.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:10.233Z,1516707190.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:10.612Z,1516707190.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:10.627Z,1516707190.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:11.011Z,1516707191.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:11.036Z,1516707191.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:11.415Z,1516707191.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:11.434Z,1516707191.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:11.816Z,1516707191.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:11.833Z,1516707191.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:12.201Z,1516707192.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:12.241Z,1516707192.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:12.609Z,1516707192.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:12.629Z,1516707192.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:13.006Z,1516707193.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:13.021Z,1516707193.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:13.394Z,1516707193.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:13.432Z,1516707193.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:13.819Z,1516707193.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:13.835Z,1516707193.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:14.220Z,1516707194.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:14.237Z,1516707194.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:17.308Z,1516707197.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:17.329Z,1516707197.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:17.426Z,1516707197.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:17.469Z,1516707197.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:17.785Z,1516707197.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:17.817Z,1516707197.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:18.185Z,1516707198.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:18.199Z,1516707198.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:18.591Z,1516707198.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:18.606Z,1516707198.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:19.006Z,1516707199.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:19.029Z,1516707199.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:19.400Z,1516707199.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:19.415Z,1516707199.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:19.774Z,1516707199.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:19.797Z,1516707199.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:20.176Z,1516707200.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:20.213Z,1516707200.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:20.576Z,1516707200.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:20.614Z,1516707200.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:20.972Z,1516707200.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:20.987Z,1516707200.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:21.385Z,1516707201.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:21.416Z,1516707201.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:21.791Z,1516707201.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:21.819Z,1516707201.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:22.195Z,1516707202.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:22.221Z,1516707202.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:22.595Z,1516707202.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:22.621Z,1516707202.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:22.977Z,1516707202.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:22.991Z,1516707202.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:23.378Z,1516707203.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:23.393Z,1516707203.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:23.782Z,1516707203.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:23.797Z,1516707203.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:24.184Z,1516707204.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:24.199Z,1516707204.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:24.587Z,1516707204.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:24.602Z,1516707204.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:24.991Z,1516707204.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:25.006Z,1516707205.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:25.400Z,1516707205.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:25.432Z,1516707205.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:25.786Z,1516707205.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:25.801Z,1516707205.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:26.186Z,1516707206.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:26.201Z,1516707206.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:26.585Z,1516707206.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:26.600Z,1516707206.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:26.984Z,1516707206.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:26.999Z,1516707206.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:27.390Z,1516707207.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:27.409Z,1516707207.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:27.799Z,1516707207.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:27.814Z,1516707207.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:28.191Z,1516707208.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:28.206Z,1516707208.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:28.599Z,1516707208.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:28.614Z,1516707208.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:28.990Z,1516707208.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:29.005Z,1516707209.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:29.380Z,1516707209.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:29.402Z,1516707209.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:29.791Z,1516707209.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:29.806Z,1516707209.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:30.186Z,1516707210.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:30.201Z,1516707210.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:30.591Z,1516707210.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:30.613Z,1516707210.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:30.995Z,1516707210.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:31.010Z,1516707211.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:31.397Z,1516707211.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:31.414Z,1516707211.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:31.787Z,1516707211.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:31.802Z,1516707211.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:32.190Z,1516707212.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:32.209Z,1516707212.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:32.591Z,1516707212.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:32.605Z,1516707212.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:32.984Z,1516707212.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:33.006Z,1516707213.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:33.389Z,1516707213.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:33.404Z,1516707213.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:33.795Z,1516707213.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:33.810Z,1516707213.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:34.196Z,1516707214.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:34.211Z,1516707214.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:34.595Z,1516707214.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:34.610Z,1516707214.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:34.986Z,1516707214.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:35.001Z,1516707215.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:35.380Z,1516707215.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:35.402Z,1516707215.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:35.793Z,1516707215.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:35.809Z,1516707215.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:36.186Z,1516707216.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:36.208Z,1516707216.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:36.592Z,1516707216.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:36.620Z,1516707216.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:36.998Z,1516707216.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:37.013Z,1516707217.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:37.396Z,1516707217.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:37.410Z,1516707217.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:37.774Z,1516707217.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:37.801Z,1516707217.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:38.193Z,1516707218.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:38.213Z,1516707218.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:38.586Z,1516707218.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:38.601Z,1516707218.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:38.990Z,1516707218.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:39.005Z,1516707219.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:39.394Z,1516707219.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:39.409Z,1516707219.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:39.799Z,1516707219.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:39.814Z,1516707219.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:40.199Z,1516707220.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:40.213Z,1516707220.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:40.598Z,1516707220.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:40.613Z,1516707220.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:40.985Z,1516707220.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:41.011Z,1516707221.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:41.374Z,1516707221.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:41.402Z,1516707221.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:41.794Z,1516707221.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:41.813Z,1516707221.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:42.190Z,1516707222.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:42.207Z,1516707222.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:42.596Z,1516707222.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:42.610Z,1516707222.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:42.998Z,1516707222.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:43.013Z,1516707223.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:43.396Z,1516707223.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:43.411Z,1516707223.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:43.785Z,1516707223.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:43.805Z,1516707223.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:44.190Z,1516707224.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:44.205Z,1516707224.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:44.597Z,1516707224.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:44.612Z,1516707224.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:44.000Z,1516707225.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:45.015Z,1516707225.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:45.401Z,1516707225.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:45.416Z,1516707225.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:45.777Z,1516707225.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:45.811Z,1516707225.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:46.191Z,1516707226.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:46.206Z,1516707226.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:46.603Z,1516707226.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:46.625Z,1516707226.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:47.004Z,1516707227.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:47.018Z,1516707227.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:47.392Z,1516707227.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:47.421Z,1516707227.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:47.782Z,1516707227.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:47.809Z,1516707227.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:48.177Z,1516707228.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:48.206Z,1516707228.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:48.592Z,1516707228.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:48.616Z,1516707228.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:49.007Z,1516707229.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:49.023Z,1516707229.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:49.397Z,1516707229.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:49.412Z,1516707229.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:49.778Z,1516707229.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:49.805Z,1516707229.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:50.181Z,1516707230.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:50.209Z,1516707230.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:50.597Z,1516707230.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:50.613Z,1516707230.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:50.996Z,1516707230.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:51.015Z,1516707231.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:51.404Z,1516707231.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:51.424Z,1516707231.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:51.781Z,1516707231.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:51.810Z,1516707231.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:52.181Z,1516707232.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:52.207Z,1516707232.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:52.604Z,1516707232.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:52.620Z,1516707232.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:53.000Z,1516707233.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:53.020Z,1516707233.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:53.396Z,1516707233.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:53.411Z,1516707233.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:53.785Z,1516707233.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:53.812Z,1516707233.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:54.185Z,1516707234.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:54.220Z,1516707234.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:54.596Z,1516707234.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:54.611Z,1516707234.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:55.007Z,1516707235.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:55.022Z,1516707235.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:55.400Z,1516707235.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:55.420Z,1516707235.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:55.781Z,1516707235.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:55.808Z,1516707235.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:56.184Z,1516707236.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:56.211Z,1516707236.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:56.605Z,1516707236.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:56.620Z,1516707236.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:56.996Z,1516707236.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:57.014Z,1516707237.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:57.404Z,1516707237.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:57.418Z,1516707237.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:57.785Z,1516707237.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:57.814Z,1516707237.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:58.181Z,1516707238.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:58.208Z,1516707238.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:58.604Z,1516707238.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:58.618Z,1516707238.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:59.008Z,1516707239.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:59.023Z,1516707239.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:59.391Z,1516707239.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:59.414Z,1516707239.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:33:59.785Z,1516707239.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:33:59.812Z,1516707239.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:00.185Z,1516707240.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:00.221Z,1516707240.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:00.596Z,1516707240.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:00.611Z,1516707240.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:01.007Z,1516707241.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:01.022Z,1516707241.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:01.408Z,1516707241.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:01.428Z,1516707241.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:01.781Z,1516707241.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:01.808Z,1516707241.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:02.184Z,1516707242.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:02.211Z,1516707242.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:02.604Z,1516707242.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:02.625Z,1516707242.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:03.004Z,1516707243.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:03.018Z,1516707243.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:03.404Z,1516707243.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:03.419Z,1516707243.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:03.785Z,1516707243.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:03.814Z,1516707243.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:04.177Z,1516707244.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:04.212Z,1516707244.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:04.604Z,1516707244.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:04.619Z,1516707244.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:05.008Z,1516707245.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:05.029Z,1516707245.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:05.400Z,1516707245.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:05.415Z,1516707245.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:05.785Z,1516707245.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:05.812Z,1516707245.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:06.185Z,1516707246.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:06.213Z,1516707246.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:06.596Z,1516707246.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:06.611Z,1516707246.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:07.004Z,1516707247.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:07.018Z,1516707247.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:07.408Z,1516707247.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:07.423Z,1516707247.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:07.778Z,1516707247.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:07.805Z,1516707247.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:08.186Z,1516707248.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:08.213Z,1516707248.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:08.593Z,1516707248.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:08.613Z,1516707248.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:08.994Z,1516707248.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:09.017Z,1516707249.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:09.396Z,1516707249.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:09.412Z,1516707249.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:09.795Z,1516707249.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:09.810Z,1516707249.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:10.185Z,1516707250.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:10.200Z,1516707250.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:10.596Z,1516707250.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:10.611Z,1516707250.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:10.995Z,1516707250.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:11.011Z,1516707251.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:11.395Z,1516707251.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:11.417Z,1516707251.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:11.792Z,1516707251.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:11.807Z,1516707251.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:12.191Z,1516707252.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:12.206Z,1516707252.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:12.595Z,1516707252.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:12.610Z,1516707252.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:12.996Z,1516707252.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:13.011Z,1516707253.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:13.396Z,1516707253.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:13.417Z,1516707253.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:13.790Z,1516707253.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:13.806Z,1516707253.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:14.189Z,1516707254.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:14.205Z,1516707254.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:14.599Z,1516707254.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:14.615Z,1516707254.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:17.689Z,1516707257.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:17.709Z,1516707257.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:17.829Z,1516707257.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:17.873Z,1516707257.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:18.187Z,1516707258.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:18.208Z,1516707258.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:18.591Z,1516707258.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:18.606Z,1516707258.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:18.988Z,1516707258.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:19.003Z,1516707259.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:19.386Z,1516707259.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:19.408Z,1516707259.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:19.791Z,1516707259.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:19.806Z,1516707259.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:20.190Z,1516707260.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:20.205Z,1516707260.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:20.591Z,1516707260.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:20.612Z,1516707260.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:20.989Z,1516707260.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:21.005Z,1516707261.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:21.386Z,1516707261.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:21.401Z,1516707261.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:21.786Z,1516707261.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:21.801Z,1516707261.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:22.181Z,1516707262.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:22.208Z,1516707262.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:22.584Z,1516707262.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:22.604Z,1516707262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:22.996Z,1516707262.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:23.011Z,1516707263.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:23.395Z,1516707263.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:23.417Z,1516707263.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:23.796Z,1516707263.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:23.811Z,1516707263.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:24.186Z,1516707264.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:24.208Z,1516707264.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:24.585Z,1516707264.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:24.601Z,1516707264.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:24.986Z,1516707264.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:25.001Z,1516707265.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:25.387Z,1516707265.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:25.401Z,1516707265.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:25.415Z,1516707265.415 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:34:25.792Z,1516707265.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:25.820Z,1516707265.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:26.202Z,1516707266.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:26.218Z,1516707266.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:26.597Z,1516707266.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:26.612Z,1516707266.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:26.977Z,1516707266.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:27.013Z,1516707267.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:27.381Z,1516707267.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:27.408Z,1516707267.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:27.776Z,1516707267.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:27.812Z,1516707267.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:28.178Z,1516707268.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:28.209Z,1516707268.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:28.580Z,1516707268.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:28.607Z,1516707268.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:28.997Z,1516707268.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:29.013Z,1516707269.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:29.397Z,1516707269.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:29.425Z,1516707269.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:29.800Z,1516707269.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:29.817Z,1516707269.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:30.177Z,1516707270.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:30.213Z,1516707270.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:30.581Z,1516707270.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:30.614Z,1516707270.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:30.977Z,1516707270.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:31.004Z,1516707271.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:31.377Z,1516707271.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:31.419Z,1516707271.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:31.795Z,1516707271.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:31.825Z,1516707271.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:32.195Z,1516707272.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:32.217Z,1516707272.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:32.595Z,1516707272.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:32.620Z,1516707272.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:32.985Z,1516707272.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:33.020Z,1516707273.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:33.382Z,1516707273.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:33.397Z,1516707273.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:33.785Z,1516707273.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:33.828Z,1516707273.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:34.185Z,1516707274.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:34.201Z,1516707274.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:34.581Z,1516707274.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:34.596Z,1516707274.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:34.995Z,1516707274.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:35.029Z,1516707275.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:35.399Z,1516707275.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:35.424Z,1516707275.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:35.799Z,1516707275.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:35.823Z,1516707275.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:36.189Z,1516707276.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:36.230Z,1516707276.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:36.585Z,1516707276.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:36.600Z,1516707276.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:36.984Z,1516707276.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:36.999Z,1516707276.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:37.381Z,1516707277.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:37.408Z,1516707277.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:37.795Z,1516707277.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:37.827Z,1516707277.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:38.191Z,1516707278.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:38.206Z,1516707278.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:38.587Z,1516707278.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:38.608Z,1516707278.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:38.986Z,1516707278.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:39.001Z,1516707279.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:39.384Z,1516707279.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:39.400Z,1516707279.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:39.784Z,1516707279.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:39.799Z,1516707279.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:40.184Z,1516707280.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:40.199Z,1516707280.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:40.584Z,1516707280.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:40.598Z,1516707280.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:40.987Z,1516707280.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:41.009Z,1516707281.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:41.399Z,1516707281.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:41.414Z,1516707281.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:41.790Z,1516707281.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:41.805Z,1516707281.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:42.186Z,1516707282.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:42.200Z,1516707282.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:42.584Z,1516707282.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:42.604Z,1516707282.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:42.985Z,1516707282.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:43.000Z,1516707283.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:43.386Z,1516707283.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:43.404Z,1516707283.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:43.790Z,1516707283.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:43.806Z,1516707283.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:44.191Z,1516707284.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:44.206Z,1516707284.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:44.591Z,1516707284.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:44.605Z,1516707284.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:44.984Z,1516707284.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:45.011Z,1516707285.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:45.389Z,1516707285.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:45.437Z,1516707285.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:45.794Z,1516707285.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:45.809Z,1516707285.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:46.184Z,1516707286.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:46.205Z,1516707286.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:46.584Z,1516707286.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:46.603Z,1516707286.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:46.996Z,1516707286.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:47.011Z,1516707287.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:47.394Z,1516707287.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:47.410Z,1516707287.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:47.794Z,1516707287.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:47.809Z,1516707287.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:48.184Z,1516707288.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:48.213Z,1516707288.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:48.586Z,1516707288.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:48.601Z,1516707288.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:48.986Z,1516707288.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:49.001Z,1516707289.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:49.384Z,1516707289.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:49.411Z,1516707289.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:49.794Z,1516707289.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:49.810Z,1516707289.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:50.194Z,1516707290.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:50.209Z,1516707290.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:50.596Z,1516707290.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:50.616Z,1516707290.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:50.981Z,1516707290.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:51.009Z,1516707291.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:51.385Z,1516707291.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:51.405Z,1516707291.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:51.783Z,1516707291.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:51.798Z,1516707291.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:52.178Z,1516707292.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:52.201Z,1516707292.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:52.580Z,1516707292.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:52.596Z,1516707292.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:53.000Z,1516707293.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:53.026Z,1516707293.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:53.391Z,1516707293.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:53.428Z,1516707293.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:53.800Z,1516707293.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:53.824Z,1516707293.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:54.189Z,1516707294.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:54.231Z,1516707294.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:54.579Z,1516707294.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:54.594Z,1516707294.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:54.989Z,1516707294.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:55.004Z,1516707295.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:55.386Z,1516707295.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:55.401Z,1516707295.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:55.792Z,1516707295.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:55.807Z,1516707295.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:56.191Z,1516707296.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:56.206Z,1516707296.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:56.587Z,1516707296.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:56.602Z,1516707296.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:56.980Z,1516707296.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:57.007Z,1516707297.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:57.385Z,1516707297.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:57.400Z,1516707297.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:57.786Z,1516707297.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:57.808Z,1516707297.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:58.184Z,1516707298.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:58.219Z,1516707298.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:58.585Z,1516707298.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:58.600Z,1516707298.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:58.995Z,1516707298.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:59.010Z,1516707299.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:59.395Z,1516707299.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:59.410Z,1516707299.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:34:59.795Z,1516707299.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:34:59.810Z,1516707299.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:00.187Z,1516707300.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:00.208Z,1516707300.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:00.581Z,1516707300.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:00.608Z,1516707300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:00.991Z,1516707300.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:01.006Z,1516707301.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:01.380Z,1516707301.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:01.417Z,1516707301.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:01.800Z,1516707301.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:01.815Z,1516707301.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:02.199Z,1516707302.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:02.214Z,1516707302.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:02.595Z,1516707302.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:02.621Z,1516707302.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:02.979Z,1516707302.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:03.007Z,1516707303.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:03.377Z,1516707303.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:03.411Z,1516707303.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:03.777Z,1516707303.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:03.813Z,1516707303.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:04.191Z,1516707304.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:04.206Z,1516707304.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:04.594Z,1516707304.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:04.609Z,1516707304.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:04.998Z,1516707304.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:05.017Z,1516707305.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:05.392Z,1516707305.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:05.416Z,1516707305.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:05.797Z,1516707305.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:05.811Z,1516707305.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:06.175Z,1516707306.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:06.212Z,1516707306.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:06.574Z,1516707306.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:06.612Z,1516707306.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:06.977Z,1516707306.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:07.005Z,1516707307.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:07.376Z,1516707307.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:07.413Z,1516707307.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:07.796Z,1516707307.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:07.812Z,1516707307.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:08.199Z,1516707308.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:08.215Z,1516707308.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:08.593Z,1516707308.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:08.608Z,1516707308.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:08.976Z,1516707308.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:09.014Z,1516707309.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:09.376Z,1516707309.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:09.417Z,1516707309.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:09.777Z,1516707309.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:09.821Z,1516707309.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:10.177Z,1516707310.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:10.193Z,1516707310.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:10.576Z,1516707310.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:10.591Z,1516707310.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:10.991Z,1516707310.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:11.018Z,1516707311.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:11.391Z,1516707311.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:11.428Z,1516707311.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:11.799Z,1516707311.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:11.824Z,1516707311.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:12.189Z,1516707312.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:12.230Z,1516707312.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:12.578Z,1516707312.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:12.593Z,1516707312.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:12.989Z,1516707312.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:13.005Z,1516707313.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:13.384Z,1516707313.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:13.399Z,1516707313.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:13.792Z,1516707313.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:13.807Z,1516707313.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:14.200Z,1516707314.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:14.214Z,1516707314.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:14.593Z,1516707314.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:14.613Z,1516707314.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:17.693Z,1516707317.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:17.709Z,1516707317.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:17.805Z,1516707317.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:17.844Z,1516707317.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:18.194Z,1516707318.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:18.209Z,1516707318.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:18.595Z,1516707318.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:18.610Z,1516707318.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:18.994Z,1516707318.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:19.009Z,1516707319.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:19.389Z,1516707319.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:19.409Z,1516707319.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:19.786Z,1516707319.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:19.801Z,1516707319.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:20.193Z,1516707320.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:20.213Z,1516707320.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:20.589Z,1516707320.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:20.604Z,1516707320.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:20.995Z,1516707320.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:21.010Z,1516707321.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:21.396Z,1516707321.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:21.411Z,1516707321.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:21.796Z,1516707321.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:21.811Z,1516707321.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:22.186Z,1516707322.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:22.201Z,1516707322.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:22.201Z,1516707322.201 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166 2018-01-23T11:35:22.201Z,1516707322.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:35:22.203Z,1516707322.203 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:22.203Z,1516707322.203 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 166 2018-01-23T11:35:22.203Z,1516707322.203 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:35:22.204Z,1516707322.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:22.205Z,1516707322.205 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166 2018-01-23T11:35:22.205Z,1516707322.205 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:35:22.216Z,1516707322.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:35:22.216Z,1516707322.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:35:22.217Z,1516707322.217 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:35:22.579Z,1516707322.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:22.622Z,1516707322.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:35:22.622Z,1516707322.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166 2018-01-23T11:35:22.623Z,1516707322.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:35:22.623Z,1516707322.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 166 2018-01-23T11:35:22.624Z,1516707322.624 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:35:22.624Z,1516707322.624 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166 2018-01-23T11:35:22.994Z,1516707322.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:23.008Z,1516707323.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:35:23.008Z,1516707323.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:35:23.008Z,1516707323.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:35:23.009Z,1516707323.009 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:35:23.009Z,1516707323.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:35:23.010Z,1516707323.010 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:35:23.010Z,1516707323.010 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:35:23.010Z,1516707323.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:35:23.011Z,1516707323.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:35:23.376Z,1516707323.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:23.439Z,1516707323.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:35:23.440Z,1516707323.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:23.799Z,1516707323.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:23.814Z,1516707323.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:35:23.815Z,1516707323.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:24.202Z,1516707324.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:24.217Z,1516707324.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:35:24.218Z,1516707324.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:24.593Z,1516707324.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:24.619Z,1516707324.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:35:24.620Z,1516707324.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:24.984Z,1516707324.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:25.011Z,1516707325.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:35:25.012Z,1516707325.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:25.384Z,1516707325.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:25.410Z,1516707325.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:35:25.411Z,1516707325.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:25.776Z,1516707325.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:25.810Z,1516707325.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:35:25.811Z,1516707325.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:26.181Z,1516707326.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:26.208Z,1516707326.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:35:26.209Z,1516707326.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:26.597Z,1516707326.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:26.616Z,1516707326.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:35:26.617Z,1516707326.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:27.005Z,1516707327.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:27.020Z,1516707327.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:35:27.021Z,1516707327.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:27.395Z,1516707327.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:27.414Z,1516707327.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:35:27.415Z,1516707327.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:27.800Z,1516707327.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:27.815Z,1516707327.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:35:27.816Z,1516707327.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:28.177Z,1516707328.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:28.211Z,1516707328.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:35:28.212Z,1516707328.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:28.575Z,1516707328.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:28.598Z,1516707328.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:35:28.599Z,1516707328.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:28.978Z,1516707328.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:29.016Z,1516707329.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:35:29.017Z,1516707329.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:29.381Z,1516707329.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:29.423Z,1516707329.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:35:29.424Z,1516707329.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:29.792Z,1516707329.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:29.824Z,1516707329.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:35:29.825Z,1516707329.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:30.208Z,1516707330.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:30.223Z,1516707330.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:35:30.224Z,1516707330.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:30.588Z,1516707330.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:30.623Z,1516707330.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:35:30.624Z,1516707330.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:30.974Z,1516707330.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:30.990Z,1516707330.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:35:30.991Z,1516707330.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:31.385Z,1516707331.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:31.414Z,1516707331.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:35:31.415Z,1516707331.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:31.778Z,1516707331.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:31.792Z,1516707331.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:35:31.793Z,1516707331.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:32.179Z,1516707332.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:32.193Z,1516707332.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:35:32.194Z,1516707332.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:32.576Z,1516707332.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:32.614Z,1516707332.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:35:32.615Z,1516707332.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:32.987Z,1516707332.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:33.017Z,1516707333.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:35:33.018Z,1516707333.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:33.387Z,1516707333.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:33.424Z,1516707333.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:35:33.425Z,1516707333.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:33.791Z,1516707333.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:33.818Z,1516707333.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:35:33.819Z,1516707333.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:34.176Z,1516707334.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:34.224Z,1516707334.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:35:34.225Z,1516707334.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:34.574Z,1516707334.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:34.589Z,1516707334.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:35:34.590Z,1516707334.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:34.983Z,1516707334.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:35.017Z,1516707335.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:35:35.018Z,1516707335.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:35.384Z,1516707335.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:35.423Z,1516707335.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:35:35.424Z,1516707335.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:35.795Z,1516707335.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:35.820Z,1516707335.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:35:35.821Z,1516707335.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:36.195Z,1516707336.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:36.224Z,1516707336.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:35:36.225Z,1516707336.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:36.595Z,1516707336.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:36.628Z,1516707336.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:35:36.629Z,1516707336.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:36.974Z,1516707336.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:36.989Z,1516707336.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:35:36.990Z,1516707336.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:37.384Z,1516707337.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:37.424Z,1516707337.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:35:37.425Z,1516707337.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:37.781Z,1516707337.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:37.795Z,1516707337.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:35:37.796Z,1516707337.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:38.183Z,1516707338.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:38.197Z,1516707338.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:35:38.198Z,1516707338.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:38.587Z,1516707338.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:38.601Z,1516707338.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:35:38.602Z,1516707338.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:38.999Z,1516707338.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:39.032Z,1516707339.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:35:39.032Z,1516707339.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:39.388Z,1516707339.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:39.402Z,1516707339.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:35:39.404Z,1516707339.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:39.800Z,1516707339.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:39.829Z,1516707339.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:35:39.830Z,1516707339.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:40.186Z,1516707340.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:40.201Z,1516707340.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:35:40.202Z,1516707340.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:40.585Z,1516707340.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:40.601Z,1516707340.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:35:40.602Z,1516707340.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:40.980Z,1516707340.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:41.013Z,1516707341.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:35:41.014Z,1516707341.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:41.384Z,1516707341.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:41.412Z,1516707341.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:35:41.413Z,1516707341.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:41.799Z,1516707341.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:41.820Z,1516707341.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:35:41.821Z,1516707341.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:42.202Z,1516707342.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:42.225Z,1516707342.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:42.601Z,1516707342.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:42.616Z,1516707342.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:42.975Z,1516707342.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:43.002Z,1516707343.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:43.394Z,1516707343.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:43.410Z,1516707343.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:43.795Z,1516707343.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:43.810Z,1516707343.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:44.191Z,1516707344.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:44.206Z,1516707344.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:44.593Z,1516707344.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:44.608Z,1516707344.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:44.997Z,1516707344.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:45.012Z,1516707345.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:45.392Z,1516707345.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:45.419Z,1516707345.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:45.800Z,1516707345.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:45.821Z,1516707345.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:46.180Z,1516707346.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:46.209Z,1516707346.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:46.574Z,1516707346.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:46.597Z,1516707346.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:46.977Z,1516707346.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:47.013Z,1516707347.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:47.376Z,1516707347.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:47.407Z,1516707347.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:47.787Z,1516707347.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:47.814Z,1516707347.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:48.206Z,1516707348.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:48.221Z,1516707348.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:48.605Z,1516707348.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:48.624Z,1516707348.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:48.974Z,1516707348.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:48.989Z,1516707348.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:49.384Z,1516707349.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:49.420Z,1516707349.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:49.776Z,1516707349.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:49.791Z,1516707349.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:50.185Z,1516707350.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:50.200Z,1516707350.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:50.584Z,1516707350.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:50.605Z,1516707350.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:50.995Z,1516707350.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:51.030Z,1516707351.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:51.388Z,1516707351.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:51.402Z,1516707351.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:51.799Z,1516707351.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:51.830Z,1516707351.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:52.185Z,1516707352.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:52.199Z,1516707352.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:52.578Z,1516707352.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:52.605Z,1516707352.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:52.987Z,1516707352.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:53.002Z,1516707353.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:53.385Z,1516707353.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:53.404Z,1516707353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:53.788Z,1516707353.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:53.803Z,1516707353.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:54.199Z,1516707354.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:54.214Z,1516707354.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:54.591Z,1516707354.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:54.612Z,1516707354.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:54.988Z,1516707354.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:55.009Z,1516707355.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:55.388Z,1516707355.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:55.403Z,1516707355.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:55.803Z,1516707355.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:55.818Z,1516707355.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:56.195Z,1516707356.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:56.210Z,1516707356.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:56.592Z,1516707356.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:56.606Z,1516707356.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:57.015Z,1516707357.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:57.050Z,1516707357.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:57.373Z,1516707357.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:57.413Z,1516707357.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:57.808Z,1516707357.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:57.832Z,1516707357.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:58.217Z,1516707358.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:58.269Z,1516707358.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:58.590Z,1516707358.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:58.629Z,1516707358.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:58.979Z,1516707358.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:59.029Z,1516707359.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:59.378Z,1516707359.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:59.436Z,1516707359.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:35:59.789Z,1516707359.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:35:59.825Z,1516707359.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:00.191Z,1516707360.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:00.241Z,1516707360.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:00.595Z,1516707360.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:00.641Z,1516707360.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:00.985Z,1516707360.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:01.000Z,1516707361.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:01.395Z,1516707361.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:01.426Z,1516707361.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:01.797Z,1516707361.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:01.856Z,1516707361.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:02.197Z,1516707362.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:02.233Z,1516707362.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:02.605Z,1516707362.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:02.638Z,1516707362.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:02.999Z,1516707362.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:03.043Z,1516707363.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:03.385Z,1516707363.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:03.417Z,1516707363.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:03.796Z,1516707363.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:03.841Z,1516707363.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:04.202Z,1516707364.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:04.275Z,1516707364.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:04.602Z,1516707364.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:04.638Z,1516707364.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:04.979Z,1516707364.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:05.014Z,1516707365.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:05.391Z,1516707365.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:05.448Z,1516707365.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:05.793Z,1516707365.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:05.835Z,1516707365.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:06.209Z,1516707366.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:06.246Z,1516707366.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:06.589Z,1516707366.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:06.628Z,1516707366.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:06.988Z,1516707366.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:07.029Z,1516707367.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:07.402Z,1516707367.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:07.449Z,1516707367.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:07.800Z,1516707367.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:07.828Z,1516707367.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:08.204Z,1516707368.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:08.233Z,1516707368.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:08.590Z,1516707368.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:08.621Z,1516707368.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:08.995Z,1516707368.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:09.034Z,1516707369.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:09.378Z,1516707369.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:09.402Z,1516707369.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:09.805Z,1516707369.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:09.843Z,1516707369.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:10.193Z,1516707370.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:10.260Z,1516707370.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:10.590Z,1516707370.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:10.645Z,1516707370.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:11.004Z,1516707371.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:11.032Z,1516707371.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:11.393Z,1516707371.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:11.408Z,1516707371.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:11.794Z,1516707371.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:11.810Z,1516707371.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:12.199Z,1516707372.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:12.267Z,1516707372.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:12.591Z,1516707372.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:12.606Z,1516707372.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:12.979Z,1516707372.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:12.994Z,1516707372.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:13.380Z,1516707373.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:13.401Z,1516707373.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:13.791Z,1516707373.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:13.806Z,1516707373.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:14.192Z,1516707374.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:14.213Z,1516707374.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:14.592Z,1516707374.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:14.607Z,1516707374.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:17.845Z,1516707377.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:17.872Z,1516707377.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:17.973Z,1516707377.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:18.009Z,1516707378.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:18.347Z,1516707378.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:18.382Z,1516707378.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:18.759Z,1516707378.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:18.785Z,1516707378.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:19.147Z,1516707379.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:19.173Z,1516707379.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:19.533Z,1516707379.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:19.569Z,1516707379.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:19.936Z,1516707379.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:19.951Z,1516707379.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:20.337Z,1516707380.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:20.353Z,1516707380.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:20.741Z,1516707380.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:20.756Z,1516707380.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:21.154Z,1516707381.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:21.184Z,1516707381.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:21.547Z,1516707381.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:21.562Z,1516707381.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:21.951Z,1516707381.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:21.966Z,1516707381.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:22.342Z,1516707382.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:22.356Z,1516707382.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:22.736Z,1516707382.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:22.763Z,1516707382.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:23.145Z,1516707383.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:23.160Z,1516707383.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:23.542Z,1516707383.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:23.557Z,1516707383.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:23.947Z,1516707383.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:23.962Z,1516707383.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:24.348Z,1516707384.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:24.368Z,1516707384.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:24.748Z,1516707384.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:24.763Z,1516707384.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:25.140Z,1516707385.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:25.156Z,1516707385.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:25.536Z,1516707385.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:25.569Z,1516707385.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:25.945Z,1516707385.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:25.961Z,1516707385.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:26.346Z,1516707386.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:26.361Z,1516707386.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:26.740Z,1516707386.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:26.755Z,1516707386.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:27.149Z,1516707387.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:27.165Z,1516707387.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:27.550Z,1516707387.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:27.569Z,1516707387.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:27.951Z,1516707387.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:27.969Z,1516707387.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:28.345Z,1516707388.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:28.360Z,1516707388.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:28.733Z,1516707388.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:28.756Z,1516707388.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:29.137Z,1516707389.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:29.160Z,1516707389.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:29.539Z,1516707389.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:29.567Z,1516707389.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:29.951Z,1516707389.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:29.966Z,1516707389.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:30.350Z,1516707390.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:30.373Z,1516707390.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:30.751Z,1516707390.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:30.766Z,1516707390.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:31.140Z,1516707391.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:31.161Z,1516707391.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:31.540Z,1516707391.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:31.569Z,1516707391.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:31.936Z,1516707391.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:31.965Z,1516707391.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:32.334Z,1516707392.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:32.361Z,1516707392.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:32.733Z,1516707392.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:32.765Z,1516707392.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:33.150Z,1516707393.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:33.174Z,1516707393.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:33.548Z,1516707393.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:33.570Z,1516707393.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:33.948Z,1516707393.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:33.970Z,1516707393.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:34.332Z,1516707394.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:34.373Z,1516707394.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:34.730Z,1516707394.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:34.769Z,1516707394.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:35.137Z,1516707395.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:35.164Z,1516707395.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:35.532Z,1516707395.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:35.580Z,1516707395.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:35.952Z,1516707395.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:35.968Z,1516707395.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:36.364Z,1516707396.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:36.379Z,1516707396.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:36.751Z,1516707396.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:36.780Z,1516707396.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:37.137Z,1516707397.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:37.164Z,1516707397.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:37.533Z,1516707397.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:37.570Z,1516707397.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:37.932Z,1516707397.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:37.966Z,1516707397.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:38.333Z,1516707398.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:38.365Z,1516707398.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:38.733Z,1516707398.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:38.769Z,1516707398.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:39.158Z,1516707399.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:39.173Z,1516707399.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:39.543Z,1516707399.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:39.577Z,1516707399.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:39.943Z,1516707399.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:39.980Z,1516707399.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:40.332Z,1516707400.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:40.375Z,1516707400.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:40.730Z,1516707400.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:40.745Z,1516707400.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:41.133Z,1516707401.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:41.148Z,1516707401.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:41.532Z,1516707401.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:41.552Z,1516707401.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:41.951Z,1516707401.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:41.979Z,1516707401.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:42.355Z,1516707402.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:42.382Z,1516707402.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:42.750Z,1516707402.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:42.780Z,1516707402.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:43.140Z,1516707403.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:43.177Z,1516707403.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:43.537Z,1516707403.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:43.557Z,1516707403.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:43.938Z,1516707403.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:43.958Z,1516707403.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:44.338Z,1516707404.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:44.353Z,1516707404.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:44.737Z,1516707404.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:44.765Z,1516707404.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:45.154Z,1516707405.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:45.187Z,1516707405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:45.543Z,1516707405.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:45.558Z,1516707405.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:45.947Z,1516707405.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:45.962Z,1516707405.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:46.340Z,1516707406.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:46.356Z,1516707406.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:46.740Z,1516707406.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:46.755Z,1516707406.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:47.140Z,1516707407.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:47.155Z,1516707407.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:47.540Z,1516707407.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:47.556Z,1516707407.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:47.955Z,1516707407.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:47.987Z,1516707407.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:48.347Z,1516707408.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:48.362Z,1516707408.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:48.747Z,1516707408.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:48.762Z,1516707408.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:49.140Z,1516707409.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:49.161Z,1516707409.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:49.540Z,1516707409.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:49.555Z,1516707409.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:49.937Z,1516707409.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:49.960Z,1516707409.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:50.340Z,1516707410.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:50.359Z,1516707410.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:50.736Z,1516707410.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:50.758Z,1516707410.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:51.151Z,1516707411.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:51.166Z,1516707411.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:51.550Z,1516707411.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:51.569Z,1516707411.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:51.950Z,1516707411.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:51.969Z,1516707411.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:52.346Z,1516707412.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:52.369Z,1516707412.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:52.744Z,1516707412.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:52.765Z,1516707412.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:53.141Z,1516707413.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:53.156Z,1516707413.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:53.542Z,1516707413.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:53.557Z,1516707413.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:53.949Z,1516707413.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:53.969Z,1516707413.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:54.351Z,1516707414.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:54.366Z,1516707414.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:54.751Z,1516707414.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:54.766Z,1516707414.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:55.140Z,1516707415.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:55.155Z,1516707415.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:55.536Z,1516707415.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:55.558Z,1516707415.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:55.941Z,1516707415.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:55.961Z,1516707415.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:56.337Z,1516707416.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:56.359Z,1516707416.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:56.739Z,1516707416.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:56.771Z,1516707416.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:57.159Z,1516707417.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:57.174Z,1516707417.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:57.555Z,1516707417.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:57.570Z,1516707417.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:57.948Z,1516707417.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:57.975Z,1516707417.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:58.337Z,1516707418.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:58.369Z,1516707418.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:58.732Z,1516707418.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:58.765Z,1516707418.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:59.133Z,1516707419.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:59.161Z,1516707419.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:59.533Z,1516707419.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:59.569Z,1516707419.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:36:59.952Z,1516707419.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:36:59.967Z,1516707419.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:00.364Z,1516707420.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:00.385Z,1516707420.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:00.752Z,1516707420.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:00.772Z,1516707420.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:01.133Z,1516707421.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:01.180Z,1516707421.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:01.533Z,1516707421.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:01.570Z,1516707421.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:01.933Z,1516707421.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:01.973Z,1516707421.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:02.338Z,1516707422.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:02.369Z,1516707422.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:02.741Z,1516707422.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:02.776Z,1516707422.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:03.152Z,1516707423.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:03.180Z,1516707423.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:03.552Z,1516707423.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:03.579Z,1516707423.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:03.956Z,1516707423.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:03.989Z,1516707423.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:04.336Z,1516707424.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:04.351Z,1516707424.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:04.744Z,1516707424.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:04.785Z,1516707424.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:05.142Z,1516707425.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:05.157Z,1516707425.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:05.540Z,1516707425.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:05.555Z,1516707425.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:05.947Z,1516707425.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:05.962Z,1516707425.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:06.347Z,1516707426.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:06.362Z,1516707426.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:06.743Z,1516707426.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:06.764Z,1516707426.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:07.145Z,1516707427.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:07.160Z,1516707427.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:07.540Z,1516707427.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:07.558Z,1516707427.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:07.942Z,1516707427.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:07.956Z,1516707427.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:08.340Z,1516707428.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:08.359Z,1516707428.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:08.740Z,1516707428.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:08.755Z,1516707428.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:09.147Z,1516707429.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:09.162Z,1516707429.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:09.547Z,1516707429.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:09.562Z,1516707429.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:09.946Z,1516707429.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:09.969Z,1516707429.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:10.345Z,1516707430.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:10.360Z,1516707430.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:10.737Z,1516707430.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:10.759Z,1516707430.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:11.142Z,1516707431.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:11.157Z,1516707431.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:11.542Z,1516707431.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:11.557Z,1516707431.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:11.947Z,1516707431.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:11.962Z,1516707431.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:12.348Z,1516707432.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:12.369Z,1516707432.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:12.748Z,1516707432.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:12.762Z,1516707432.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:13.145Z,1516707433.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:13.160Z,1516707433.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:13.164Z,1516707433.164 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:32:13.1Z 2018-01-23T11:37:13.164Z,1516707433.164 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:37:13.164Z,1516707433.164 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:37:13.539Z,1516707433.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:13.559Z,1516707433.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:14.056Z,1516707434.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:14.072Z,1516707434.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:14.342Z,1516707434.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:14.357Z,1516707434.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:17.449Z,1516707437.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:17.464Z,1516707437.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:17.543Z,1516707437.543 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0196.lzma 2018-01-23T11:37:17.576Z,1516707437.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:17.621Z,1516707437.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:17.927Z,1516707437.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:17.961Z,1516707437.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:18.298Z,1516707438.298 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0196.lzma.bak 2018-01-23T11:37:18.301Z,1516707438.301 [DataOverHttps](INFO): SBD MOMSN=7755506 2018-01-23T11:37:18.350Z,1516707438.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:18.373Z,1516707438.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:18.953Z,1516707438.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:18.973Z,1516707438.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:19.116Z,1516707439.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:19.137Z,1516707439.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:22.212Z,1516707442.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:22.227Z,1516707442.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:22.340Z,1516707442.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:22.365Z,1516707442.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:22.723Z,1516707442.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:22.738Z,1516707442.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:23.135Z,1516707443.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:23.168Z,1516707443.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:23.511Z,1516707443.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:23.537Z,1516707443.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:23.916Z,1516707443.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:23.932Z,1516707443.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:27.058Z,1516707447.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:27.073Z,1516707447.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:27.150Z,1516707447.150 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0197.lzma 2018-01-23T11:37:27.170Z,1516707447.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:27.220Z,1516707447.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:27.540Z,1516707447.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:27.564Z,1516707447.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:27.972Z,1516707447.972 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0197.lzma.bak 2018-01-23T11:37:27.972Z,1516707447.972 [DataOverHttps](INFO): SBD MOMSN=7755509 2018-01-23T11:37:28.022Z,1516707448.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:28.037Z,1516707448.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:28.568Z,1516707448.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:28.589Z,1516707448.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:28.592Z,1516707448.592 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:37:28.592Z,1516707448.592 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:37:28.592Z,1516707448.592 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:37:28.722Z,1516707448.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:28.745Z,1516707448.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:31.923Z,1516707451.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:31.938Z,1516707451.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:32.033Z,1516707452.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:32.072Z,1516707452.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:32.426Z,1516707452.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:32.449Z,1516707452.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:32.830Z,1516707452.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:32.845Z,1516707452.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:33.230Z,1516707453.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:33.245Z,1516707453.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:33.620Z,1516707453.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:33.641Z,1516707453.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:34.021Z,1516707454.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:34.035Z,1516707454.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:34.417Z,1516707454.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:34.432Z,1516707454.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:34.811Z,1516707454.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:34.842Z,1516707454.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:35.227Z,1516707455.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:35.242Z,1516707455.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:35.626Z,1516707455.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:35.642Z,1516707455.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:36.027Z,1516707456.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:36.041Z,1516707456.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:36.421Z,1516707456.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:36.435Z,1516707456.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:36.806Z,1516707456.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:36.837Z,1516707456.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:37.221Z,1516707457.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:37.236Z,1516707457.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:37.608Z,1516707457.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:37.645Z,1516707457.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:38.024Z,1516707458.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:38.051Z,1516707458.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:38.435Z,1516707458.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:38.462Z,1516707458.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:38.828Z,1516707458.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:38.842Z,1516707458.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:39.208Z,1516707459.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:39.234Z,1516707459.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:39.608Z,1516707459.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:39.634Z,1516707459.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:40.008Z,1516707460.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:40.037Z,1516707460.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:40.409Z,1516707460.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:40.441Z,1516707460.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:40.813Z,1516707460.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:40.844Z,1516707460.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:41.223Z,1516707461.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:41.251Z,1516707461.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:41.619Z,1516707461.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:41.645Z,1516707461.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:42.019Z,1516707462.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:42.053Z,1516707462.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:42.408Z,1516707462.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:42.453Z,1516707462.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:42.806Z,1516707462.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:42.821Z,1516707462.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:43.209Z,1516707463.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:43.224Z,1516707463.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:43.611Z,1516707463.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:43.626Z,1516707463.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:44.027Z,1516707464.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:44.050Z,1516707464.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:44.427Z,1516707464.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:44.442Z,1516707464.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:44.819Z,1516707464.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:44.840Z,1516707464.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:45.219Z,1516707465.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:45.234Z,1516707465.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:45.616Z,1516707465.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:45.631Z,1516707465.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:46.016Z,1516707466.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:46.036Z,1516707466.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:46.419Z,1516707466.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:46.434Z,1516707466.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:46.822Z,1516707466.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:46.841Z,1516707466.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:47.223Z,1516707467.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:47.238Z,1516707467.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:47.620Z,1516707467.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:47.649Z,1516707467.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:48.027Z,1516707468.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:48.049Z,1516707468.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:48.422Z,1516707468.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:48.437Z,1516707468.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:48.813Z,1516707468.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:48.837Z,1516707468.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:49.222Z,1516707469.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:49.237Z,1516707469.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:49.618Z,1516707469.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:49.633Z,1516707469.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:50.024Z,1516707470.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:50.053Z,1516707470.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:50.436Z,1516707470.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:50.450Z,1516707470.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:50.827Z,1516707470.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:50.843Z,1516707470.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:51.208Z,1516707471.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:51.241Z,1516707471.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:51.607Z,1516707471.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:51.641Z,1516707471.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:52.008Z,1516707472.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:52.049Z,1516707472.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:52.413Z,1516707472.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:52.448Z,1516707472.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:52.812Z,1516707472.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:52.849Z,1516707472.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:53.227Z,1516707473.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:53.254Z,1516707473.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:53.623Z,1516707473.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:53.654Z,1516707473.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:54.027Z,1516707474.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:54.060Z,1516707474.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:54.420Z,1516707474.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:54.435Z,1516707474.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:54.813Z,1516707474.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:54.828Z,1516707474.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:55.223Z,1516707475.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:55.237Z,1516707475.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:55.615Z,1516707475.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:55.636Z,1516707475.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:56.019Z,1516707476.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:56.034Z,1516707476.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:56.439Z,1516707476.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:56.463Z,1516707476.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:56.819Z,1516707476.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:56.840Z,1516707476.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:57.218Z,1516707477.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:57.233Z,1516707477.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:57.616Z,1516707477.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:57.631Z,1516707477.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:58.017Z,1516707478.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:58.032Z,1516707478.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:58.416Z,1516707478.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:58.435Z,1516707478.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:58.817Z,1516707478.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:58.832Z,1516707478.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:59.220Z,1516707479.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:59.240Z,1516707479.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:37:59.620Z,1516707479.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:37:59.635Z,1516707479.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:00.031Z,1516707480.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:00.046Z,1516707480.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:00.421Z,1516707480.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:00.436Z,1516707480.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:00.817Z,1516707480.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:00.837Z,1516707480.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:01.216Z,1516707481.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:01.239Z,1516707481.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:01.617Z,1516707481.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:01.632Z,1516707481.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:02.027Z,1516707482.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:02.043Z,1516707482.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:02.426Z,1516707482.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:02.441Z,1516707482.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:02.827Z,1516707482.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:02.845Z,1516707482.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:03.222Z,1516707483.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:03.241Z,1516707483.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:03.621Z,1516707483.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:03.636Z,1516707483.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:04.018Z,1516707484.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:04.033Z,1516707484.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:04.416Z,1516707484.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:04.436Z,1516707484.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:04.812Z,1516707484.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:04.835Z,1516707484.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:05.227Z,1516707485.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:05.242Z,1516707485.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:05.624Z,1516707485.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:05.653Z,1516707485.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:06.031Z,1516707486.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:06.053Z,1516707486.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:06.434Z,1516707486.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:06.448Z,1516707486.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:06.806Z,1516707486.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:06.838Z,1516707486.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:07.213Z,1516707487.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:07.240Z,1516707487.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:07.608Z,1516707487.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:07.637Z,1516707487.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:08.027Z,1516707488.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:08.042Z,1516707488.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:08.431Z,1516707488.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:08.446Z,1516707488.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:08.823Z,1516707488.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:08.861Z,1516707488.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:09.212Z,1516707489.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:09.244Z,1516707489.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:09.609Z,1516707489.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:09.640Z,1516707489.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:10.013Z,1516707490.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:10.050Z,1516707490.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:10.409Z,1516707490.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:10.425Z,1516707490.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:10.808Z,1516707490.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:10.825Z,1516707490.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:11.227Z,1516707491.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:11.255Z,1516707491.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:11.623Z,1516707491.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:11.658Z,1516707491.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:12.031Z,1516707492.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:12.065Z,1516707492.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:12.416Z,1516707492.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:12.434Z,1516707492.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:12.807Z,1516707492.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:12.822Z,1516707492.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:13.221Z,1516707493.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:13.355Z,1516707493.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:13.614Z,1516707493.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:13.629Z,1516707493.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:14.023Z,1516707494.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:14.038Z,1516707494.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:14.427Z,1516707494.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:14.442Z,1516707494.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:14.820Z,1516707494.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:14.835Z,1516707494.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:15.217Z,1516707495.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:15.232Z,1516707495.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:15.614Z,1516707495.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:15.633Z,1516707495.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:16.017Z,1516707496.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:16.033Z,1516707496.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:16.416Z,1516707496.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:16.437Z,1516707496.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:16.812Z,1516707496.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:16.834Z,1516707496.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:17.226Z,1516707497.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:17.242Z,1516707497.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:17.625Z,1516707497.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:17.645Z,1516707497.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:18.026Z,1516707498.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:18.041Z,1516707498.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:18.418Z,1516707498.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:18.433Z,1516707498.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:18.817Z,1516707498.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:18.879Z,1516707498.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:19.223Z,1516707499.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:19.238Z,1516707499.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:19.617Z,1516707499.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:19.640Z,1516707499.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:20.026Z,1516707500.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:20.049Z,1516707500.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:20.428Z,1516707500.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:20.442Z,1516707500.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:20.827Z,1516707500.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:20.842Z,1516707500.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:21.212Z,1516707501.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:21.234Z,1516707501.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:21.612Z,1516707501.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:21.639Z,1516707501.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:22.017Z,1516707502.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:22.033Z,1516707502.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:22.412Z,1516707502.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:22.444Z,1516707502.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:22.812Z,1516707502.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:22.834Z,1516707502.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:23.228Z,1516707503.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:23.243Z,1516707503.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:23.244Z,1516707503.244 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167 2018-01-23T11:38:23.244Z,1516707503.244 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:38:23.245Z,1516707503.245 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:23.245Z,1516707503.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 167 2018-01-23T11:38:23.245Z,1516707503.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:38:23.247Z,1516707503.247 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:23.247Z,1516707503.247 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167 2018-01-23T11:38:23.248Z,1516707503.248 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:38:23.259Z,1516707503.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:38:23.260Z,1516707503.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:38:23.260Z,1516707503.260 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:38:23.630Z,1516707503.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:23.706Z,1516707503.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:38:23.707Z,1516707503.707 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167 2018-01-23T11:38:23.707Z,1516707503.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:38:23.707Z,1516707503.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 167 2018-01-23T11:38:23.708Z,1516707503.708 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:38:23.708Z,1516707503.708 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167 2018-01-23T11:38:24.027Z,1516707504.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:24.045Z,1516707504.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:38:24.046Z,1516707504.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:38:24.046Z,1516707504.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:38:24.047Z,1516707504.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:38:24.047Z,1516707504.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:38:24.047Z,1516707504.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:38:24.048Z,1516707504.048 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:38:24.048Z,1516707504.048 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:38:24.049Z,1516707504.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:38:24.409Z,1516707504.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:24.435Z,1516707504.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:38:24.436Z,1516707504.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:24.808Z,1516707504.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:24.845Z,1516707504.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:38:24.845Z,1516707504.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:25.217Z,1516707505.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:25.244Z,1516707505.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:38:25.245Z,1516707505.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:25.609Z,1516707505.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:25.652Z,1516707505.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:38:25.653Z,1516707505.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:26.023Z,1516707506.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:26.049Z,1516707506.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:38:26.051Z,1516707506.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:26.488Z,1516707506.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:26.503Z,1516707506.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T11:38:26.504Z,1516707506.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:26.820Z,1516707506.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:26.851Z,1516707506.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:38:26.852Z,1516707506.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:27.209Z,1516707507.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:27.225Z,1516707507.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:38:27.226Z,1516707507.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:27.617Z,1516707507.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:27.652Z,1516707507.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:38:27.653Z,1516707507.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:28.032Z,1516707508.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:28.058Z,1516707508.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:38:28.059Z,1516707508.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:28.436Z,1516707508.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:28.468Z,1516707508.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:38:28.469Z,1516707508.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:28.832Z,1516707508.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:28.857Z,1516707508.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:38:28.858Z,1516707508.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:29.217Z,1516707509.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:29.233Z,1516707509.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:38:29.234Z,1516707509.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:32.308Z,1516707512.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:32.327Z,1516707512.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T11:38:32.328Z,1516707512.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:32.443Z,1516707512.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:32.484Z,1516707512.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:38:32.485Z,1516707512.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:32.815Z,1516707512.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:32.836Z,1516707512.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:38:32.837Z,1516707512.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:33.216Z,1516707513.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:33.231Z,1516707513.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:38:33.232Z,1516707513.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:33.589Z,1516707513.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:33.624Z,1516707513.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:38:33.625Z,1516707513.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:33.987Z,1516707513.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:34.020Z,1516707514.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:38:34.021Z,1516707514.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:34.393Z,1516707514.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:34.420Z,1516707514.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:38:34.421Z,1516707514.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:34.788Z,1516707514.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:34.824Z,1516707514.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:38:34.825Z,1516707514.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:35.198Z,1516707515.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:35.224Z,1516707515.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:38:35.225Z,1516707515.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:35.612Z,1516707515.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:35.627Z,1516707515.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:38:35.628Z,1516707515.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:36.003Z,1516707516.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:36.033Z,1516707516.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:38:36.034Z,1516707516.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:36.388Z,1516707516.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:36.421Z,1516707516.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:38:36.422Z,1516707516.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:36.793Z,1516707516.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:36.820Z,1516707516.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:38:36.821Z,1516707516.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:37.189Z,1516707517.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:37.224Z,1516707517.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:38:37.225Z,1516707517.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:37.588Z,1516707517.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:37.624Z,1516707517.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:38:37.625Z,1516707517.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:38.013Z,1516707518.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:38.028Z,1516707518.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:38:38.029Z,1516707518.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:38.422Z,1516707518.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:38.437Z,1516707518.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:38:38.438Z,1516707518.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:38.807Z,1516707518.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:38.832Z,1516707518.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:38:38.833Z,1516707518.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:39.194Z,1516707519.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:39.222Z,1516707519.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:38:39.223Z,1516707519.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:39.590Z,1516707519.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:39.617Z,1516707519.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:38:39.618Z,1516707519.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:39.000Z,1516707520.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:40.036Z,1516707520.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:38:40.037Z,1516707520.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:40.413Z,1516707520.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:40.428Z,1516707520.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:38:40.429Z,1516707520.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:40.800Z,1516707520.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:40.833Z,1516707520.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:38:40.834Z,1516707520.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:41.189Z,1516707521.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:41.225Z,1516707521.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:38:41.226Z,1516707521.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:41.593Z,1516707521.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:41.626Z,1516707521.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:38:41.627Z,1516707521.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:41.999Z,1516707521.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:42.036Z,1516707522.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:38:42.037Z,1516707522.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:42.419Z,1516707522.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:42.433Z,1516707522.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:38:42.434Z,1516707522.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:42.813Z,1516707522.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:42.828Z,1516707522.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:38:42.829Z,1516707522.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:43.190Z,1516707523.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:43.216Z,1516707523.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:38:43.217Z,1516707523.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:43.588Z,1516707523.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:43.603Z,1516707523.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:44.007Z,1516707524.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:44.035Z,1516707524.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:44.403Z,1516707524.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:44.429Z,1516707524.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:44.799Z,1516707524.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:44.836Z,1516707524.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:45.197Z,1516707525.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:45.233Z,1516707525.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:45.596Z,1516707525.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:45.632Z,1516707525.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:46.003Z,1516707526.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:46.030Z,1516707526.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:46.402Z,1516707526.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:46.433Z,1516707526.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:46.807Z,1516707526.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:46.833Z,1516707526.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:47.193Z,1516707527.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:47.208Z,1516707527.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:47.594Z,1516707527.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:47.609Z,1516707527.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:48.007Z,1516707528.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:48.038Z,1516707528.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:48.411Z,1516707528.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:48.444Z,1516707528.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:48.807Z,1516707528.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:48.822Z,1516707528.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:49.198Z,1516707529.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:49.225Z,1516707529.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:49.599Z,1516707529.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:49.614Z,1516707529.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:50.003Z,1516707530.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:50.018Z,1516707530.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:50.407Z,1516707530.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:50.422Z,1516707530.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:50.815Z,1516707530.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:50.830Z,1516707530.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:51.199Z,1516707531.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:51.214Z,1516707531.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:51.593Z,1516707531.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:51.620Z,1516707531.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:51.998Z,1516707531.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:52.013Z,1516707532.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:52.408Z,1516707532.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:52.423Z,1516707532.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:52.805Z,1516707532.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:52.825Z,1516707532.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:53.205Z,1516707533.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:53.220Z,1516707533.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:53.604Z,1516707533.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:53.619Z,1516707533.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:54.003Z,1516707534.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:54.018Z,1516707534.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:54.397Z,1516707534.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:54.411Z,1516707534.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:54.793Z,1516707534.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:54.815Z,1516707534.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:55.202Z,1516707535.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:55.229Z,1516707535.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:55.610Z,1516707535.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:55.625Z,1516707535.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:56.012Z,1516707536.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:56.026Z,1516707536.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:56.393Z,1516707536.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:56.416Z,1516707536.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:56.798Z,1516707536.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:56.813Z,1516707536.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:57.206Z,1516707537.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:57.221Z,1516707537.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:57.605Z,1516707537.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:57.621Z,1516707537.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:57.996Z,1516707537.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:58.011Z,1516707538.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:58.409Z,1516707538.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:58.425Z,1516707538.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:58.810Z,1516707538.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:58.829Z,1516707538.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:59.210Z,1516707539.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:59.224Z,1516707539.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:59.593Z,1516707539.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:38:59.628Z,1516707539.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:38:59.991Z,1516707539.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:00.029Z,1516707540.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:00.395Z,1516707540.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:00.421Z,1516707540.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:00.797Z,1516707540.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:00.829Z,1516707540.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:01.207Z,1516707541.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:01.222Z,1516707541.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:01.613Z,1516707541.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:01.632Z,1516707541.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:02.016Z,1516707542.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:02.031Z,1516707542.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:02.397Z,1516707542.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:02.423Z,1516707542.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:02.793Z,1516707542.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:02.826Z,1516707542.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:03.188Z,1516707543.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:03.229Z,1516707543.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:03.596Z,1516707543.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:03.622Z,1516707543.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:03.994Z,1516707543.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:04.030Z,1516707544.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:04.399Z,1516707544.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:04.430Z,1516707544.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:04.806Z,1516707544.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:04.841Z,1516707544.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:05.219Z,1516707545.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:05.233Z,1516707545.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:05.598Z,1516707545.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:05.618Z,1516707545.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:05.997Z,1516707545.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:06.040Z,1516707546.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:06.395Z,1516707546.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:06.411Z,1516707546.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:06.795Z,1516707546.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:06.810Z,1516707546.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:07.207Z,1516707547.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:07.236Z,1516707547.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:07.626Z,1516707547.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:07.642Z,1516707547.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:08.001Z,1516707548.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:08.017Z,1516707548.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:08.395Z,1516707548.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:08.418Z,1516707548.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:08.799Z,1516707548.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:08.814Z,1516707548.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:09.198Z,1516707549.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:09.213Z,1516707549.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:09.593Z,1516707549.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:09.618Z,1516707549.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:09.997Z,1516707549.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:10.012Z,1516707550.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:10.400Z,1516707550.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:10.424Z,1516707550.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:10.815Z,1516707550.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:10.830Z,1516707550.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:11.208Z,1516707551.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:11.223Z,1516707551.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:11.598Z,1516707551.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:11.613Z,1516707551.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:11.992Z,1516707551.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:12.019Z,1516707552.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:12.399Z,1516707552.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:12.420Z,1516707552.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:12.786Z,1516707552.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:12.829Z,1516707552.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:13.215Z,1516707553.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:13.222Z,1516707553.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x65508 got:0x42776 2018-01-23T11:39:13.258Z,1516707553.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:13.611Z,1516707553.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:13.626Z,1516707553.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:14.008Z,1516707554.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:14.023Z,1516707554.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:14.406Z,1516707554.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:14.424Z,1516707554.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:14.804Z,1516707554.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:14.831Z,1516707554.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:15.202Z,1516707555.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:15.218Z,1516707555.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:15.595Z,1516707555.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:15.618Z,1516707555.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:15.988Z,1516707555.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:16.021Z,1516707556.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:16.409Z,1516707556.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:16.436Z,1516707556.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:16.818Z,1516707556.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:16.833Z,1516707556.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:17.212Z,1516707557.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:17.229Z,1516707557.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:17.590Z,1516707557.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:17.625Z,1516707557.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:18.008Z,1516707558.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:18.024Z,1516707558.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:18.391Z,1516707558.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:18.429Z,1516707558.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:18.789Z,1516707558.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:18.821Z,1516707558.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:19.199Z,1516707559.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:19.241Z,1516707559.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:19.619Z,1516707559.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:19.626Z,1516707559.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x59758 got:0x7234 2018-01-23T11:39:19.646Z,1516707559.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:20.002Z,1516707560.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:20.033Z,1516707560.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:20.392Z,1516707560.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:20.423Z,1516707560.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:20.787Z,1516707560.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:20.831Z,1516707560.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:21.189Z,1516707561.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:21.206Z,1516707561.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:21.590Z,1516707561.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:21.609Z,1516707561.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:21.999Z,1516707561.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:22.014Z,1516707562.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:22.399Z,1516707562.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:22.444Z,1516707562.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:22.813Z,1516707562.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:22.841Z,1516707562.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:23.205Z,1516707563.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:23.246Z,1516707563.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:23.592Z,1516707563.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:23.609Z,1516707563.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:23.994Z,1516707563.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:24.040Z,1516707564.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:24.401Z,1516707564.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:24.444Z,1516707564.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:24.790Z,1516707564.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:24.810Z,1516707564.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:25.205Z,1516707565.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:25.235Z,1516707565.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:25.607Z,1516707565.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:25.635Z,1516707565.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:25.999Z,1516707565.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:26.018Z,1516707566.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:26.395Z,1516707566.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:26.418Z,1516707566.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:26.797Z,1516707566.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:26.813Z,1516707566.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:27.197Z,1516707567.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:27.248Z,1516707567.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:27.594Z,1516707567.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:27.633Z,1516707567.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:27.995Z,1516707567.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:28.014Z,1516707568.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:28.401Z,1516707568.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:28.418Z,1516707568.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:28.803Z,1516707568.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:28.848Z,1516707568.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:29.200Z,1516707569.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:29.244Z,1516707569.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:29.598Z,1516707569.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:29.617Z,1516707569.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:32.720Z,1516707572.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:32.745Z,1516707572.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:32.847Z,1516707572.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:32.862Z,1516707572.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:33.200Z,1516707573.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:33.241Z,1516707573.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:33.611Z,1516707573.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:33.641Z,1516707573.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:33.000Z,1516707574.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:34.014Z,1516707574.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:34.396Z,1516707574.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:34.419Z,1516707574.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:34.802Z,1516707574.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:34.821Z,1516707574.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:35.196Z,1516707575.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:35.211Z,1516707575.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:35.592Z,1516707575.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:35.617Z,1516707575.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:35.997Z,1516707575.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:36.013Z,1516707576.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:36.406Z,1516707576.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:36.425Z,1516707576.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:36.806Z,1516707576.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:36.851Z,1516707576.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:37.204Z,1516707577.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:37.223Z,1516707577.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:37.595Z,1516707577.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:37.625Z,1516707577.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:37.991Z,1516707577.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:38.025Z,1516707578.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:38.390Z,1516707578.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:38.421Z,1516707578.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:38.789Z,1516707578.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:38.824Z,1516707578.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:39.199Z,1516707579.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:39.240Z,1516707579.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:39.623Z,1516707579.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:39.638Z,1516707579.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:40.012Z,1516707580.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:40.047Z,1516707580.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:40.394Z,1516707580.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:40.429Z,1516707580.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:40.793Z,1516707580.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:40.826Z,1516707580.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:41.189Z,1516707581.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:41.209Z,1516707581.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:41.602Z,1516707581.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:41.633Z,1516707581.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:41.998Z,1516707581.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:42.013Z,1516707582.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:42.404Z,1516707582.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:42.419Z,1516707582.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:42.804Z,1516707582.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:42.821Z,1516707582.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:43.202Z,1516707583.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:43.218Z,1516707583.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:43.593Z,1516707583.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:43.616Z,1516707583.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:43.996Z,1516707583.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:44.017Z,1516707584.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:44.398Z,1516707584.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:44.413Z,1516707584.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:44.796Z,1516707584.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:44.817Z,1516707584.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:45.206Z,1516707585.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:45.221Z,1516707585.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:45.606Z,1516707585.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:45.621Z,1516707585.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:46.007Z,1516707586.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:46.022Z,1516707586.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:46.396Z,1516707586.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:46.411Z,1516707586.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:46.795Z,1516707586.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:46.821Z,1516707586.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:47.196Z,1516707587.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:47.211Z,1516707587.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:47.592Z,1516707587.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:47.610Z,1516707587.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:47.997Z,1516707587.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:48.012Z,1516707588.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:48.404Z,1516707588.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:48.427Z,1516707588.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:48.810Z,1516707588.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:48.825Z,1516707588.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:49.207Z,1516707589.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:49.224Z,1516707589.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:49.599Z,1516707589.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:49.619Z,1516707589.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:49.988Z,1516707589.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:50.024Z,1516707590.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:50.389Z,1516707590.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:50.422Z,1516707590.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:50.799Z,1516707590.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:50.819Z,1516707590.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:51.210Z,1516707591.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:51.225Z,1516707591.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:51.612Z,1516707591.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:51.627Z,1516707591.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:52.004Z,1516707592.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:52.025Z,1516707592.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:52.389Z,1516707592.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:52.421Z,1516707592.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:52.789Z,1516707592.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:52.825Z,1516707592.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:53.189Z,1516707593.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:53.225Z,1516707593.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:53.594Z,1516707593.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:53.621Z,1516707593.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:53.988Z,1516707593.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:54.021Z,1516707594.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:54.407Z,1516707594.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:54.428Z,1516707594.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:54.808Z,1516707594.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:54.830Z,1516707594.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:55.208Z,1516707595.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:55.224Z,1516707595.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:55.589Z,1516707595.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:55.616Z,1516707595.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:55.988Z,1516707595.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:56.022Z,1516707596.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:56.391Z,1516707596.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:56.427Z,1516707596.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:56.790Z,1516707596.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:56.816Z,1516707596.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:57.204Z,1516707597.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:57.235Z,1516707597.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:57.613Z,1516707597.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:57.628Z,1516707597.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:58.004Z,1516707598.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:58.026Z,1516707598.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:58.388Z,1516707598.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:58.429Z,1516707598.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:58.789Z,1516707598.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:58.817Z,1516707598.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:59.189Z,1516707599.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:59.221Z,1516707599.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:59.589Z,1516707599.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:39:59.626Z,1516707599.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:39:59.988Z,1516707599.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:00.028Z,1516707600.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:00.404Z,1516707600.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:00.426Z,1516707600.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:00.808Z,1516707600.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:00.836Z,1516707600.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:01.208Z,1516707601.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:01.229Z,1516707601.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:01.589Z,1516707601.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:01.620Z,1516707601.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:01.996Z,1516707601.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:02.022Z,1516707602.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:02.389Z,1516707602.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:02.425Z,1516707602.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:02.793Z,1516707602.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:02.824Z,1516707602.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:03.199Z,1516707603.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:03.233Z,1516707603.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:03.611Z,1516707603.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:03.635Z,1516707603.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:03.999Z,1516707603.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:04.034Z,1516707604.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:04.388Z,1516707604.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:04.424Z,1516707604.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:04.788Z,1516707604.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:04.826Z,1516707604.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:05.189Z,1516707605.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:05.220Z,1516707605.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:05.589Z,1516707605.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:05.604Z,1516707605.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:05.993Z,1516707605.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:06.012Z,1516707606.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:06.408Z,1516707606.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:06.433Z,1516707606.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:06.824Z,1516707606.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:06.838Z,1516707606.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:07.203Z,1516707607.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:07.242Z,1516707607.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:07.597Z,1516707607.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:07.612Z,1516707607.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:07.993Z,1516707607.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:08.008Z,1516707608.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:08.394Z,1516707608.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:08.408Z,1516707608.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:08.798Z,1516707608.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:08.817Z,1516707608.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:09.211Z,1516707609.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:09.242Z,1516707609.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:09.607Z,1516707609.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:09.622Z,1516707609.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:09.000Z,1516707610.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:10.015Z,1516707610.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:10.396Z,1516707610.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:10.410Z,1516707610.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:10.796Z,1516707610.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:10.813Z,1516707610.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:11.195Z,1516707611.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:11.217Z,1516707611.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:11.598Z,1516707611.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:11.613Z,1516707611.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:11.996Z,1516707611.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:12.013Z,1516707612.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:12.400Z,1516707612.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:12.421Z,1516707612.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:12.804Z,1516707612.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:12.818Z,1516707612.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:13.199Z,1516707613.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:13.214Z,1516707613.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:13.595Z,1516707613.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:13.616Z,1516707613.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:13.996Z,1516707613.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:14.011Z,1516707614.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:14.397Z,1516707614.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:14.416Z,1516707614.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:14.795Z,1516707614.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:14.816Z,1516707614.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:15.199Z,1516707615.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:15.221Z,1516707615.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:15.602Z,1516707615.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:15.617Z,1516707615.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:16.011Z,1516707616.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:16.026Z,1516707616.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:16.396Z,1516707616.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:16.417Z,1516707616.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:16.797Z,1516707616.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:16.822Z,1516707616.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:17.196Z,1516707617.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:17.214Z,1516707617.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:17.597Z,1516707617.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:17.628Z,1516707617.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:18.002Z,1516707618.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:18.017Z,1516707618.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:18.402Z,1516707618.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:18.417Z,1516707618.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:18.803Z,1516707618.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:18.818Z,1516707618.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:19.204Z,1516707619.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:19.224Z,1516707619.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:19.596Z,1516707619.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:19.615Z,1516707619.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:19.993Z,1516707619.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:20.020Z,1516707620.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:20.404Z,1516707620.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:20.419Z,1516707620.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:20.793Z,1516707620.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:20.812Z,1516707620.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:21.210Z,1516707621.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:21.225Z,1516707621.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:21.610Z,1516707621.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:21.625Z,1516707621.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:22.007Z,1516707622.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:22.023Z,1516707622.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:22.393Z,1516707622.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:22.417Z,1516707622.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:22.801Z,1516707622.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:22.817Z,1516707622.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:23.208Z,1516707623.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:23.229Z,1516707623.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:23.611Z,1516707623.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:23.633Z,1516707623.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:24.012Z,1516707624.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:24.028Z,1516707624.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:24.389Z,1516707624.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:24.421Z,1516707624.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:24.800Z,1516707624.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:24.818Z,1516707624.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:25.208Z,1516707625.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:25.222Z,1516707625.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:25.604Z,1516707625.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:25.631Z,1516707625.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:26.008Z,1516707626.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:26.022Z,1516707626.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:26.390Z,1516707626.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:26.418Z,1516707626.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:26.786Z,1516707626.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:26.814Z,1516707626.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:27.208Z,1516707627.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:27.223Z,1516707627.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:27.610Z,1516707627.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:27.635Z,1516707627.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:28.003Z,1516707628.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:28.038Z,1516707628.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:28.389Z,1516707628.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:28.424Z,1516707628.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:28.792Z,1516707628.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:28.827Z,1516707628.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:29.199Z,1516707629.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:29.226Z,1516707629.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:29.620Z,1516707629.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:29.634Z,1516707629.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:30.013Z,1516707630.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:30.032Z,1516707630.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:33.094Z,1516707633.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:33.129Z,1516707633.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:33.229Z,1516707633.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:33.273Z,1516707633.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:33.595Z,1516707633.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:33.622Z,1516707633.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:33.991Z,1516707633.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:34.014Z,1516707634.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:34.391Z,1516707634.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:34.406Z,1516707634.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:34.783Z,1516707634.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:34.797Z,1516707634.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:35.182Z,1516707635.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:35.197Z,1516707635.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:35.579Z,1516707635.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:35.602Z,1516707635.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:35.980Z,1516707635.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:35.994Z,1516707635.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:36.384Z,1516707636.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:36.399Z,1516707636.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:36.788Z,1516707636.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:36.803Z,1516707636.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:37.183Z,1516707637.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:37.204Z,1516707637.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:37.579Z,1516707637.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:37.594Z,1516707637.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:37.978Z,1516707637.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:38.001Z,1516707638.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:38.384Z,1516707638.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:38.400Z,1516707638.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:38.778Z,1516707638.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:38.793Z,1516707638.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:39.188Z,1516707639.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:39.216Z,1516707639.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:39.593Z,1516707639.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:39.608Z,1516707639.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:39.991Z,1516707639.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:40.006Z,1516707640.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:40.389Z,1516707640.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:40.404Z,1516707640.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:40.780Z,1516707640.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:40.800Z,1516707640.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:41.194Z,1516707641.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:41.210Z,1516707641.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:41.593Z,1516707641.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:41.613Z,1516707641.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:41.991Z,1516707641.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:42.006Z,1516707642.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:42.386Z,1516707642.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:42.401Z,1516707642.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:42.776Z,1516707642.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:42.798Z,1516707642.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:43.191Z,1516707643.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:43.206Z,1516707643.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:43.595Z,1516707643.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:43.610Z,1516707643.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:43.991Z,1516707643.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:44.006Z,1516707644.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:44.373Z,1516707644.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:44.408Z,1516707644.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:44.770Z,1516707644.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:44.797Z,1516707644.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:45.191Z,1516707645.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:45.207Z,1516707645.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:45.595Z,1516707645.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:45.609Z,1516707645.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:45.993Z,1516707645.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:46.008Z,1516707646.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:46.373Z,1516707646.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:46.403Z,1516707646.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:46.773Z,1516707646.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:46.812Z,1516707646.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:47.176Z,1516707647.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:47.207Z,1516707647.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:47.583Z,1516707647.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:47.614Z,1516707647.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:47.995Z,1516707647.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:48.022Z,1516707648.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:48.386Z,1516707648.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:48.409Z,1516707648.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:48.784Z,1516707648.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:48.821Z,1516707648.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:49.181Z,1516707649.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:49.196Z,1516707649.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:49.582Z,1516707649.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:49.597Z,1516707649.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:49.977Z,1516707649.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:49.992Z,1516707649.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:50.386Z,1516707650.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:50.401Z,1516707650.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:50.783Z,1516707650.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:50.798Z,1516707650.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:51.188Z,1516707651.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:51.202Z,1516707651.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:51.580Z,1516707651.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:51.595Z,1516707651.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:51.978Z,1516707651.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:51.994Z,1516707651.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:52.380Z,1516707652.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:52.395Z,1516707652.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:52.779Z,1516707652.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:52.794Z,1516707652.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:53.182Z,1516707653.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:53.197Z,1516707653.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:53.595Z,1516707653.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:53.626Z,1516707653.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:53.987Z,1516707653.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:54.002Z,1516707654.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:54.384Z,1516707654.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:54.399Z,1516707654.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:54.778Z,1516707654.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:54.798Z,1516707654.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:55.180Z,1516707655.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:55.195Z,1516707655.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:55.583Z,1516707655.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:55.598Z,1516707655.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:55.980Z,1516707655.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:56.001Z,1516707656.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:56.391Z,1516707656.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:56.406Z,1516707656.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:56.791Z,1516707656.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:56.806Z,1516707656.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:57.192Z,1516707657.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:57.206Z,1516707657.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:57.581Z,1516707657.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:57.595Z,1516707657.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:57.980Z,1516707657.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:57.995Z,1516707657.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:58.376Z,1516707658.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:58.409Z,1516707658.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:58.786Z,1516707658.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:58.801Z,1516707658.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:59.187Z,1516707659.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:59.202Z,1516707659.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:59.591Z,1516707659.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:40:59.606Z,1516707659.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:40:59.994Z,1516707659.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:00.009Z,1516707660.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:00.396Z,1516707660.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:00.417Z,1516707660.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:00.773Z,1516707660.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:00.809Z,1516707660.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:01.176Z,1516707661.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:01.203Z,1516707661.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:01.577Z,1516707661.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:01.605Z,1516707661.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:01.972Z,1516707661.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:01.998Z,1516707661.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:02.390Z,1516707662.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:02.406Z,1516707662.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:02.792Z,1516707662.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:02.807Z,1516707662.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:03.188Z,1516707663.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:03.218Z,1516707663.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:03.571Z,1516707663.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:03.604Z,1516707663.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:03.972Z,1516707663.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:04.009Z,1516707664.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:04.376Z,1516707664.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:04.402Z,1516707664.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:04.773Z,1516707664.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:04.805Z,1516707664.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:05.172Z,1516707665.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:05.204Z,1516707665.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:05.583Z,1516707665.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:05.609Z,1516707665.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:05.995Z,1516707665.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:06.017Z,1516707666.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:06.382Z,1516707666.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:06.426Z,1516707666.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:06.776Z,1516707666.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:06.809Z,1516707666.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:07.172Z,1516707667.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:07.209Z,1516707667.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:07.577Z,1516707667.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:07.616Z,1516707667.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:07.973Z,1516707667.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:08.009Z,1516707668.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:08.386Z,1516707668.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:08.418Z,1516707668.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:08.787Z,1516707668.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:08.814Z,1516707668.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:09.191Z,1516707669.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:09.216Z,1516707669.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:09.578Z,1516707669.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:09.592Z,1516707669.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:09.974Z,1516707669.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:09.989Z,1516707669.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:10.378Z,1516707670.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:10.393Z,1516707670.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:10.780Z,1516707670.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:10.795Z,1516707670.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:11.177Z,1516707671.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:11.205Z,1516707671.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:11.583Z,1516707671.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:11.599Z,1516707671.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:11.987Z,1516707671.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:12.002Z,1516707672.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:12.383Z,1516707672.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:12.398Z,1516707672.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:12.776Z,1516707672.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:12.794Z,1516707672.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:13.172Z,1516707673.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:13.199Z,1516707673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:13.574Z,1516707673.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:13.605Z,1516707673.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:13.973Z,1516707673.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:14.004Z,1516707674.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:14.356Z,1516707674.356 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T11:41:14.356Z,1516707674.356 [NAL9602] Data Fault, FailCount= 1 2018-01-23T11:41:14.356Z,1516707674.356 [NAL9602](ERROR): Data Fault 2018-01-23T11:41:14.374Z,1516707674.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:14.412Z,1516707674.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:14.425Z,1516707674.425 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T11:41:14.756Z,1516707674.756 [NAL9602](INFO): Powering down 2018-01-23T11:41:14.774Z,1516707674.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:14.789Z,1516707674.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:15.173Z,1516707675.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:15.192Z,1516707675.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:15.581Z,1516707675.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:15.595Z,1516707675.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:15.637Z,1516707675.637 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T11:41:15.637Z,1516707675.637 [NAL9602] No Fault, FailCount= 1 2018-01-23T11:41:15.972Z,1516707675.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:15.988Z,1516707675.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:16.376Z,1516707676.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:16.391Z,1516707676.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:16.776Z,1516707676.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:16.792Z,1516707676.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:17.176Z,1516707677.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:17.192Z,1516707677.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:17.576Z,1516707677.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:17.635Z,1516707677.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:17.984Z,1516707677.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:17.000Z,1516707678.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:18.380Z,1516707678.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:18.395Z,1516707678.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:18.780Z,1516707678.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:18.794Z,1516707678.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:19.182Z,1516707679.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:19.197Z,1516707679.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:19.580Z,1516707679.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:19.595Z,1516707679.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:19.979Z,1516707679.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:19.996Z,1516707679.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:20.376Z,1516707680.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:20.401Z,1516707680.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:20.777Z,1516707680.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:20.792Z,1516707680.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:21.179Z,1516707681.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:21.193Z,1516707681.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:21.584Z,1516707681.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:21.600Z,1516707681.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:21.977Z,1516707681.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:21.992Z,1516707681.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:22.380Z,1516707682.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:22.394Z,1516707682.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:22.779Z,1516707682.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:22.794Z,1516707682.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:23.180Z,1516707683.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:23.195Z,1516707683.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:23.578Z,1516707683.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:23.593Z,1516707683.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:23.981Z,1516707683.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:23.996Z,1516707683.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:24.380Z,1516707684.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:24.395Z,1516707684.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:24.395Z,1516707684.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168 2018-01-23T11:41:24.395Z,1516707684.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:41:24.397Z,1516707684.397 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:24.397Z,1516707684.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 168 2018-01-23T11:41:24.397Z,1516707684.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:41:24.399Z,1516707684.399 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:24.399Z,1516707684.399 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168 2018-01-23T11:41:24.399Z,1516707684.399 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:41:24.411Z,1516707684.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:41:24.411Z,1516707684.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:41:24.412Z,1516707684.412 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:41:24.779Z,1516707684.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:24.810Z,1516707684.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:41:24.810Z,1516707684.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168 2018-01-23T11:41:24.811Z,1516707684.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:41:24.811Z,1516707684.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 168 2018-01-23T11:41:24.812Z,1516707684.812 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:41:24.812Z,1516707684.812 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168 2018-01-23T11:41:25.179Z,1516707685.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:25.193Z,1516707685.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:41:25.194Z,1516707685.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:41:25.194Z,1516707685.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:41:25.194Z,1516707685.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:41:25.195Z,1516707685.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:41:25.195Z,1516707685.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:41:25.196Z,1516707685.196 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:41:25.196Z,1516707685.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:41:25.196Z,1516707685.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:41:25.581Z,1516707685.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:25.596Z,1516707685.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:41:25.597Z,1516707685.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:25.981Z,1516707685.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:26.000Z,1516707686.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:41:26.001Z,1516707686.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:26.385Z,1516707686.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:26.486Z,1516707686.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T11:41:26.487Z,1516707686.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:26.769Z,1516707686.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:26.795Z,1516707686.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:41:26.796Z,1516707686.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:27.180Z,1516707687.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:27.200Z,1516707687.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:41:27.201Z,1516707687.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:27.585Z,1516707687.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:27.604Z,1516707687.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:41:27.605Z,1516707687.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:27.980Z,1516707687.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:27.995Z,1516707687.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:41:27.996Z,1516707687.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:28.380Z,1516707688.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:28.400Z,1516707688.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:41:28.401Z,1516707688.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:28.784Z,1516707688.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:28.799Z,1516707688.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:41:28.800Z,1516707688.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:29.188Z,1516707689.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:29.202Z,1516707689.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:41:29.204Z,1516707689.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:29.580Z,1516707689.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:29.600Z,1516707689.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:41:29.601Z,1516707689.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:29.976Z,1516707689.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:30.006Z,1516707690.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:41:30.007Z,1516707690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:30.380Z,1516707690.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:30.399Z,1516707690.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:41:30.400Z,1516707690.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:33.470Z,1516707693.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:33.492Z,1516707693.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T11:41:33.493Z,1516707693.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:33.593Z,1516707693.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:33.640Z,1516707693.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:41:33.641Z,1516707693.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:33.943Z,1516707693.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:33.959Z,1516707693.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:41:33.960Z,1516707693.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:34.344Z,1516707694.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:34.381Z,1516707694.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:41:34.382Z,1516707694.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:34.741Z,1516707694.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:34.757Z,1516707694.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:41:34.758Z,1516707694.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:35.143Z,1516707695.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:35.158Z,1516707695.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:41:35.160Z,1516707695.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:35.543Z,1516707695.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:35.557Z,1516707695.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:41:35.558Z,1516707695.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:35.943Z,1516707695.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:35.957Z,1516707695.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:41:35.958Z,1516707695.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:36.343Z,1516707696.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:36.358Z,1516707696.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:41:36.359Z,1516707696.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:36.743Z,1516707696.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:36.757Z,1516707696.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:41:36.758Z,1516707696.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:37.143Z,1516707697.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:37.158Z,1516707697.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:41:37.159Z,1516707697.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:37.544Z,1516707697.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:37.558Z,1516707697.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:41:37.559Z,1516707697.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:37.943Z,1516707697.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:37.964Z,1516707697.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:41:37.965Z,1516707697.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:38.342Z,1516707698.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:38.357Z,1516707698.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:41:38.358Z,1516707698.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:38.743Z,1516707698.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:38.758Z,1516707698.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:41:38.759Z,1516707698.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:39.143Z,1516707699.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:39.157Z,1516707699.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:41:39.158Z,1516707699.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:39.541Z,1516707699.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:39.556Z,1516707699.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:41:39.557Z,1516707699.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:39.943Z,1516707699.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:39.958Z,1516707699.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:41:39.959Z,1516707699.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:40.343Z,1516707700.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:40.358Z,1516707700.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:41:40.359Z,1516707700.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:40.741Z,1516707700.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:40.755Z,1516707700.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:41:40.756Z,1516707700.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:41.144Z,1516707701.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:41.158Z,1516707701.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:41:41.159Z,1516707701.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:41.543Z,1516707701.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:41.558Z,1516707701.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:41:41.559Z,1516707701.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:41.944Z,1516707701.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:41.958Z,1516707701.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:41:41.959Z,1516707701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:42.344Z,1516707702.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:42.359Z,1516707702.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:41:42.360Z,1516707702.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:42.745Z,1516707702.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:42.760Z,1516707702.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:41:42.761Z,1516707702.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:43.144Z,1516707703.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:43.158Z,1516707703.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:41:43.159Z,1516707703.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:43.540Z,1516707703.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:43.567Z,1516707703.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:41:43.568Z,1516707703.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:43.947Z,1516707703.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:43.962Z,1516707703.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:41:43.963Z,1516707703.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:44.345Z,1516707704.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:44.359Z,1516707704.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:41:44.360Z,1516707704.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:44.741Z,1516707704.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:44.763Z,1516707704.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:45.120Z,1516707705.120 [NAL9602](INFO): Powering up NAL9602 2018-01-23T11:41:45.141Z,1516707705.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:45.184Z,1516707705.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:45.540Z,1516707705.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:45.567Z,1516707705.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:45.945Z,1516707705.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:45.960Z,1516707705.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:46.344Z,1516707706.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:46.370Z,1516707706.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:46.744Z,1516707706.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:46.759Z,1516707706.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:47.153Z,1516707707.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:47.168Z,1516707707.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:47.544Z,1516707707.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:47.559Z,1516707707.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:47.944Z,1516707707.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:47.960Z,1516707707.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:48.338Z,1516707708.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:48.372Z,1516707708.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:48.745Z,1516707708.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:48.760Z,1516707708.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:49.145Z,1516707709.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:49.160Z,1516707709.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:49.541Z,1516707709.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:49.568Z,1516707709.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:49.949Z,1516707709.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:49.964Z,1516707709.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:50.350Z,1516707710.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:50.365Z,1516707710.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:50.740Z,1516707710.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:50.771Z,1516707710.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:51.149Z,1516707711.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:51.164Z,1516707711.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:51.533Z,1516707711.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:51.566Z,1516707711.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:51.935Z,1516707711.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:51.963Z,1516707711.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:52.336Z,1516707712.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:52.376Z,1516707712.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:52.733Z,1516707712.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:52.757Z,1516707712.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:53.135Z,1516707713.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:53.171Z,1516707713.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:53.536Z,1516707713.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:53.568Z,1516707713.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:53.936Z,1516707713.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:53.951Z,1516707713.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:54.336Z,1516707714.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:54.357Z,1516707714.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:54.744Z,1516707714.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:54.759Z,1516707714.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:55.144Z,1516707715.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:55.159Z,1516707715.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:55.555Z,1516707715.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:55.586Z,1516707715.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:55.929Z,1516707715.929 [NAL9602](INFO): NAL9602 initialized 2018-01-23T11:41:55.945Z,1516707715.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:55.961Z,1516707715.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:56.345Z,1516707716.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:56.360Z,1516707716.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:56.747Z,1516707716.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:56.762Z,1516707716.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:57.151Z,1516707717.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:57.166Z,1516707717.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:57.547Z,1516707717.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:57.562Z,1516707717.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:57.944Z,1516707717.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:57.960Z,1516707717.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:58.342Z,1516707718.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:58.369Z,1516707718.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:58.747Z,1516707718.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:58.762Z,1516707718.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:59.150Z,1516707719.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:59.165Z,1516707719.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:59.551Z,1516707719.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:59.566Z,1516707719.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:41:59.950Z,1516707719.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:41:59.965Z,1516707719.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:00.349Z,1516707720.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:00.364Z,1516707720.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:00.744Z,1516707720.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:00.759Z,1516707720.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:01.145Z,1516707721.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:01.160Z,1516707721.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:01.545Z,1516707721.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:01.560Z,1516707721.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:01.950Z,1516707721.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:01.969Z,1516707721.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:02.351Z,1516707722.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:02.366Z,1516707722.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:02.750Z,1516707722.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:02.765Z,1516707722.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:03.144Z,1516707723.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:03.160Z,1516707723.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:03.544Z,1516707723.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:03.559Z,1516707723.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:03.946Z,1516707723.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:03.961Z,1516707723.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:04.344Z,1516707724.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:04.371Z,1516707724.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:04.748Z,1516707724.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:04.763Z,1516707724.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:05.155Z,1516707725.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:05.170Z,1516707725.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:05.553Z,1516707725.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:05.573Z,1516707725.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:05.954Z,1516707725.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:05.969Z,1516707725.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:06.346Z,1516707726.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:06.365Z,1516707726.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:06.745Z,1516707726.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:06.765Z,1516707726.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:07.146Z,1516707727.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:07.161Z,1516707727.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:07.546Z,1516707727.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:07.569Z,1516707727.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:07.955Z,1516707727.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:07.970Z,1516707727.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:08.355Z,1516707728.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:08.370Z,1516707728.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:08.755Z,1516707728.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:08.770Z,1516707728.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:09.145Z,1516707729.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:09.165Z,1516707729.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:09.545Z,1516707729.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:09.561Z,1516707729.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:09.941Z,1516707729.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:09.968Z,1516707729.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:10.350Z,1516707730.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:10.366Z,1516707730.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:10.746Z,1516707730.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:10.765Z,1516707730.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:11.157Z,1516707731.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:11.172Z,1516707731.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:11.559Z,1516707731.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:11.574Z,1516707731.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:11.957Z,1516707731.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:11.972Z,1516707731.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:12.346Z,1516707732.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:12.362Z,1516707732.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:12.744Z,1516707732.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:12.775Z,1516707732.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:13.145Z,1516707733.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:13.161Z,1516707733.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:13.545Z,1516707733.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:13.561Z,1516707733.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:13.954Z,1516707733.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:13.970Z,1516707733.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:14.357Z,1516707734.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:14.373Z,1516707734.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:14.756Z,1516707734.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:14.771Z,1516707734.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:15.140Z,1516707735.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:15.170Z,1516707735.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:15.544Z,1516707735.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:15.559Z,1516707735.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:15.945Z,1516707735.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:15.965Z,1516707735.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:16.341Z,1516707736.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:16.368Z,1516707736.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:16.748Z,1516707736.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:16.763Z,1516707736.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:17.156Z,1516707737.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:17.170Z,1516707737.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:17.558Z,1516707737.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:17.574Z,1516707737.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:17.953Z,1516707737.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:17.973Z,1516707737.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:18.337Z,1516707738.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:18.371Z,1516707738.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:18.736Z,1516707738.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:18.773Z,1516707738.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:19.149Z,1516707739.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:19.164Z,1516707739.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:19.536Z,1516707739.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:19.571Z,1516707739.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:19.955Z,1516707739.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:19.970Z,1516707739.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:20.359Z,1516707740.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:20.374Z,1516707740.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:20.756Z,1516707740.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:20.777Z,1516707740.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:21.136Z,1516707741.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:21.173Z,1516707741.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:21.548Z,1516707741.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:21.563Z,1516707741.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:21.936Z,1516707741.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:21.971Z,1516707741.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:22.338Z,1516707742.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:22.377Z,1516707742.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:22.740Z,1516707742.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:22.767Z,1516707742.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:23.153Z,1516707743.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:23.173Z,1516707743.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:23.560Z,1516707743.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:23.575Z,1516707743.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:23.954Z,1516707743.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:23.969Z,1516707743.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:24.351Z,1516707744.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:24.377Z,1516707744.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:24.737Z,1516707744.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:24.769Z,1516707744.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:25.138Z,1516707745.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:25.169Z,1516707745.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:25.541Z,1516707745.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:25.568Z,1516707745.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:25.961Z,1516707745.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:25.981Z,1516707745.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:26.360Z,1516707746.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:26.375Z,1516707746.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:26.756Z,1516707746.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:26.785Z,1516707746.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:27.136Z,1516707747.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:27.169Z,1516707747.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:27.536Z,1516707747.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:27.564Z,1516707747.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:27.944Z,1516707747.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:27.979Z,1516707747.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:28.345Z,1516707748.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:28.377Z,1516707748.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:28.744Z,1516707748.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:28.776Z,1516707748.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:28.779Z,1516707748.779 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:42:28.779Z,1516707748.779 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:42:28.779Z,1516707748.779 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:42:28.779Z,1516707748.779 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:42:29.155Z,1516707749.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:29.184Z,1516707749.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:29.187Z,1516707749.187 [Default:CheckIn:D] Stopped 2018-01-23T11:42:29.187Z,1516707749.187 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:42:29.555Z,1516707749.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:29.584Z,1516707749.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:29.587Z,1516707749.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 504.618783 min 2018-01-23T11:42:29.587Z,1516707749.587 [Default:CheckIn:E] Stopped 2018-01-23T11:42:29.587Z,1516707749.587 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:42:29.587Z,1516707749.587 [Default:CheckIn] Stopped 2018-01-23T11:42:29.588Z,1516707749.588 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:42:29.588Z,1516707749.588 [Default:CheckIn](INFO): Running loop #50 2018-01-23T11:42:29.588Z,1516707749.588 [Default:CheckIn] Running Loop=50 2018-01-23T11:42:29.588Z,1516707749.588 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:42:29.588Z,1516707749.588 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:42:29.951Z,1516707749.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:29.981Z,1516707749.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:30.343Z,1516707750.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:30.364Z,1516707750.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:30.746Z,1516707750.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:30.785Z,1516707750.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:33.865Z,1516707753.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:33.889Z,1516707753.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:33.984Z,1516707753.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:34.013Z,1516707754.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:34.362Z,1516707754.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:34.378Z,1516707754.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:34.763Z,1516707754.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:34.778Z,1516707754.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:35.162Z,1516707755.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:35.182Z,1516707755.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:35.536Z,1516707755.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:35.569Z,1516707755.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:35.936Z,1516707755.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:35.965Z,1516707755.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:36.348Z,1516707756.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:36.363Z,1516707756.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:36.760Z,1516707756.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:36.774Z,1516707756.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:37.156Z,1516707757.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:37.170Z,1516707757.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:37.559Z,1516707757.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:37.574Z,1516707757.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:37.959Z,1516707757.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:37.973Z,1516707757.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:38.349Z,1516707758.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:38.364Z,1516707758.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:38.734Z,1516707758.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:38.769Z,1516707758.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:39.137Z,1516707759.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:39.169Z,1516707759.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:39.548Z,1516707759.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:39.563Z,1516707759.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:39.959Z,1516707759.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:39.974Z,1516707759.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:40.362Z,1516707760.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:40.381Z,1516707760.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:40.746Z,1516707760.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:40.772Z,1516707760.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:41.143Z,1516707761.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:41.170Z,1516707761.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:41.556Z,1516707761.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:41.577Z,1516707761.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:41.940Z,1516707761.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:41.969Z,1516707761.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:42.338Z,1516707762.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:42.368Z,1516707762.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:42.738Z,1516707762.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:42.772Z,1516707762.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:43.158Z,1516707763.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:43.189Z,1516707763.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:43.557Z,1516707763.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:43.580Z,1516707763.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:43.963Z,1516707763.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:43.978Z,1516707763.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:44.339Z,1516707764.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:44.374Z,1516707764.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:44.736Z,1516707764.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:44.773Z,1516707764.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:45.149Z,1516707765.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:45.176Z,1516707765.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:45.536Z,1516707765.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:45.574Z,1516707765.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:45.949Z,1516707765.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:45.981Z,1516707765.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:46.355Z,1516707766.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:46.378Z,1516707766.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:46.761Z,1516707766.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:46.776Z,1516707766.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:47.141Z,1516707767.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:47.173Z,1516707767.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:47.543Z,1516707767.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:47.574Z,1516707767.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:47.940Z,1516707767.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:47.954Z,1516707767.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:48.346Z,1516707768.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:48.361Z,1516707768.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:48.749Z,1516707768.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:48.764Z,1516707768.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:49.160Z,1516707769.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:49.191Z,1516707769.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:49.556Z,1516707769.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:49.583Z,1516707769.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:49.952Z,1516707769.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:49.967Z,1516707769.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:50.348Z,1516707770.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:50.363Z,1516707770.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:50.744Z,1516707770.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:50.766Z,1516707770.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:51.144Z,1516707771.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:51.172Z,1516707771.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:51.548Z,1516707771.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:51.563Z,1516707771.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:51.951Z,1516707771.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:51.966Z,1516707771.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:52.353Z,1516707772.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:52.368Z,1516707772.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:52.754Z,1516707772.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:52.769Z,1516707772.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:53.141Z,1516707773.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:53.168Z,1516707773.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:53.551Z,1516707773.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:53.566Z,1516707773.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:53.947Z,1516707773.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:53.964Z,1516707773.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:54.343Z,1516707774.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:54.366Z,1516707774.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:54.746Z,1516707774.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:54.761Z,1516707774.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:55.154Z,1516707775.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:55.177Z,1516707775.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:55.556Z,1516707775.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:55.572Z,1516707775.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:55.957Z,1516707775.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:55.973Z,1516707775.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:56.352Z,1516707776.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:56.367Z,1516707776.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:56.747Z,1516707776.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:56.762Z,1516707776.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:57.140Z,1516707777.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:57.165Z,1516707777.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:57.548Z,1516707777.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:57.568Z,1516707777.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:57.953Z,1516707777.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:57.976Z,1516707777.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:58.358Z,1516707778.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:58.373Z,1516707778.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:58.757Z,1516707778.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:58.773Z,1516707778.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:59.140Z,1516707779.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:59.173Z,1516707779.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:59.548Z,1516707779.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:59.569Z,1516707779.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:42:59.938Z,1516707779.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:42:59.965Z,1516707779.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:00.337Z,1516707780.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:00.381Z,1516707780.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:00.752Z,1516707780.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:00.760Z,1516707780.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T11:43:00.806Z,1516707780.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:01.159Z,1516707781.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:01.181Z,1516707781.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:01.552Z,1516707781.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:01.573Z,1516707781.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:01.956Z,1516707781.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:01.974Z,1516707781.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:02.337Z,1516707782.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:02.373Z,1516707782.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:02.734Z,1516707782.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:02.774Z,1516707782.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:03.142Z,1516707783.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:03.168Z,1516707783.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:03.537Z,1516707783.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:03.571Z,1516707783.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:03.959Z,1516707783.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:03.974Z,1516707783.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:04.362Z,1516707784.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:04.377Z,1516707784.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:04.756Z,1516707784.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:04.794Z,1516707784.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:05.141Z,1516707785.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:05.177Z,1516707785.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:05.536Z,1516707785.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:05.577Z,1516707785.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:05.936Z,1516707785.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:05.974Z,1516707785.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:06.344Z,1516707786.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:06.371Z,1516707786.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:06.736Z,1516707786.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:06.780Z,1516707786.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:07.147Z,1516707787.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:07.185Z,1516707787.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:07.549Z,1516707787.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:07.586Z,1516707787.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:07.961Z,1516707787.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:07.977Z,1516707787.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:08.336Z,1516707788.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:08.378Z,1516707788.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:08.734Z,1516707788.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:08.749Z,1516707788.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:09.138Z,1516707789.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:09.172Z,1516707789.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:09.538Z,1516707789.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:09.556Z,1516707789.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:09.955Z,1516707789.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:09.984Z,1516707789.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:10.374Z,1516707790.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:10.389Z,1516707790.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:10.762Z,1516707790.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:10.796Z,1516707790.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:11.148Z,1516707791.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:11.185Z,1516707791.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:11.549Z,1516707791.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:11.592Z,1516707791.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:11.945Z,1516707791.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:11.982Z,1516707791.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:12.365Z,1516707792.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:12.388Z,1516707792.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:12.745Z,1516707792.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:12.763Z,1516707792.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:13.164Z,1516707793.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:13.196Z,1516707793.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:13.548Z,1516707793.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:13.574Z,1516707793.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:13.954Z,1516707793.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:13.973Z,1516707793.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:14.346Z,1516707794.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:14.364Z,1516707794.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:14.740Z,1516707794.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:14.791Z,1516707794.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:15.144Z,1516707795.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:15.163Z,1516707795.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:15.541Z,1516707795.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:15.570Z,1516707795.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:15.957Z,1516707795.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:15.972Z,1516707795.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:16.356Z,1516707796.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:16.397Z,1516707796.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:16.755Z,1516707796.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:16.772Z,1516707796.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:17.149Z,1516707797.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:17.168Z,1516707797.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:17.544Z,1516707797.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:17.563Z,1516707797.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:17.954Z,1516707797.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:17.977Z,1516707797.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:18.358Z,1516707798.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:18.381Z,1516707798.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:18.758Z,1516707798.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:18.781Z,1516707798.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:19.137Z,1516707799.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:19.177Z,1516707799.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:19.536Z,1516707799.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:19.562Z,1516707799.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:19.936Z,1516707799.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:19.962Z,1516707799.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:20.337Z,1516707800.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:20.380Z,1516707800.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:20.740Z,1516707800.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:20.771Z,1516707800.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:21.155Z,1516707801.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:21.170Z,1516707801.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:21.558Z,1516707801.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:21.586Z,1516707801.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:21.955Z,1516707801.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:21.973Z,1516707801.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:22.337Z,1516707802.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:22.369Z,1516707802.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:22.745Z,1516707802.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:22.777Z,1516707802.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:23.137Z,1516707803.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:23.168Z,1516707803.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:23.540Z,1516707803.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:23.580Z,1516707803.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:23.948Z,1516707803.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:23.985Z,1516707803.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:24.351Z,1516707804.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:24.389Z,1516707804.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:24.751Z,1516707804.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:24.777Z,1516707804.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:25.138Z,1516707805.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:25.153Z,1516707805.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:25.544Z,1516707805.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:25.585Z,1516707805.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:25.959Z,1516707805.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:25.984Z,1516707805.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:26.363Z,1516707806.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:26.394Z,1516707806.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:26.759Z,1516707806.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:26.788Z,1516707806.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:27.146Z,1516707807.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:27.161Z,1516707807.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:27.542Z,1516707807.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:27.565Z,1516707807.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:27.959Z,1516707807.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:27.997Z,1516707807.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:28.359Z,1516707808.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:28.394Z,1516707808.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:28.748Z,1516707808.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:28.763Z,1516707808.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:29.144Z,1516707809.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:29.159Z,1516707809.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:29.544Z,1516707809.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:29.559Z,1516707809.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:29.947Z,1516707809.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:29.963Z,1516707809.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:30.351Z,1516707810.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:30.367Z,1516707810.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:30.752Z,1516707810.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:30.767Z,1516707810.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:31.147Z,1516707811.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:31.161Z,1516707811.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:34.232Z,1516707814.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:34.255Z,1516707814.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:34.380Z,1516707814.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:34.425Z,1516707814.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:34.719Z,1516707814.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:34.753Z,1516707814.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:35.123Z,1516707815.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:35.157Z,1516707815.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:35.501Z,1516707815.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:35.520Z,1516707815.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:35.902Z,1516707815.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:35.925Z,1516707815.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:36.306Z,1516707816.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:36.320Z,1516707816.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:36.701Z,1516707816.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:36.723Z,1516707816.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:37.108Z,1516707817.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:37.123Z,1516707817.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:37.511Z,1516707817.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:37.532Z,1516707817.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:37.908Z,1516707817.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:37.923Z,1516707817.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:38.304Z,1516707818.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:38.319Z,1516707818.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:38.704Z,1516707818.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:38.724Z,1516707818.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:39.105Z,1516707819.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:39.125Z,1516707819.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:39.510Z,1516707819.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:39.533Z,1516707819.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:39.909Z,1516707819.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:39.924Z,1516707819.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:40.310Z,1516707820.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:40.329Z,1516707820.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:40.711Z,1516707820.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:40.726Z,1516707820.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:41.111Z,1516707821.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:41.126Z,1516707821.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:41.501Z,1516707821.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:41.528Z,1516707821.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:41.909Z,1516707821.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:41.924Z,1516707821.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:42.306Z,1516707822.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:42.321Z,1516707822.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:42.700Z,1516707822.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:42.721Z,1516707822.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:43.115Z,1516707823.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:43.130Z,1516707823.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:43.519Z,1516707823.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:43.534Z,1516707823.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:43.916Z,1516707823.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:43.931Z,1516707823.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:44.306Z,1516707824.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:44.325Z,1516707824.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:44.707Z,1516707824.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:44.721Z,1516707824.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:45.106Z,1516707825.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:45.129Z,1516707825.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:45.504Z,1516707825.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:45.525Z,1516707825.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:45.901Z,1516707825.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:45.940Z,1516707825.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:46.316Z,1516707826.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:46.335Z,1516707826.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:46.720Z,1516707826.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:46.735Z,1516707826.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:47.116Z,1516707827.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:47.141Z,1516707827.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:47.495Z,1516707827.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:47.518Z,1516707827.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:47.897Z,1516707827.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:47.932Z,1516707827.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:48.301Z,1516707828.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:48.340Z,1516707828.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:48.694Z,1516707828.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:48.709Z,1516707828.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:49.107Z,1516707829.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:49.139Z,1516707829.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:49.515Z,1516707829.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:49.542Z,1516707829.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:49.907Z,1516707829.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:49.922Z,1516707829.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:50.301Z,1516707830.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:50.316Z,1516707830.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:50.705Z,1516707830.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:50.725Z,1516707830.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:51.106Z,1516707831.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:51.125Z,1516707831.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:51.504Z,1516707831.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:51.519Z,1516707831.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:51.902Z,1516707831.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:51.926Z,1516707831.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:52.315Z,1516707832.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:52.337Z,1516707832.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:52.718Z,1516707832.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:52.741Z,1516707832.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:53.116Z,1516707833.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:53.131Z,1516707833.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:53.497Z,1516707833.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:53.533Z,1516707833.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:53.901Z,1516707833.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:53.926Z,1516707833.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:54.298Z,1516707834.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:54.329Z,1516707834.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:54.701Z,1516707834.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:54.726Z,1516707834.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:55.111Z,1516707835.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:55.133Z,1516707835.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:55.518Z,1516707835.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:55.547Z,1516707835.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:55.915Z,1516707835.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:55.930Z,1516707835.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:56.296Z,1516707836.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:56.332Z,1516707836.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:56.697Z,1516707836.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:56.733Z,1516707836.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:57.101Z,1516707837.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:57.133Z,1516707837.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:57.497Z,1516707837.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:57.532Z,1516707837.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:57.897Z,1516707837.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:57.934Z,1516707837.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:58.307Z,1516707838.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:58.333Z,1516707838.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:58.719Z,1516707838.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:58.734Z,1516707838.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:59.107Z,1516707839.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:59.144Z,1516707839.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:59.501Z,1516707839.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:59.536Z,1516707839.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:43:59.896Z,1516707839.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:43:59.933Z,1516707839.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:00.302Z,1516707840.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:00.317Z,1516707840.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:00.705Z,1516707840.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:00.720Z,1516707840.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:01.115Z,1516707841.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:01.142Z,1516707841.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:01.519Z,1516707841.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:01.552Z,1516707841.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:01.916Z,1516707841.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:01.930Z,1516707841.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:02.307Z,1516707842.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:02.322Z,1516707842.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:02.706Z,1516707842.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:02.721Z,1516707842.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:03.104Z,1516707843.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:03.125Z,1516707843.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:03.507Z,1516707843.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:03.522Z,1516707843.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:03.906Z,1516707843.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:03.921Z,1516707843.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:04.308Z,1516707844.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:04.323Z,1516707844.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:04.712Z,1516707844.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:04.727Z,1516707844.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:05.107Z,1516707845.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:05.123Z,1516707845.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:05.504Z,1516707845.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:05.519Z,1516707845.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:05.904Z,1516707845.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:05.918Z,1516707845.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:06.305Z,1516707846.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:06.324Z,1516707846.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:06.706Z,1516707846.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:06.721Z,1516707846.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:07.108Z,1516707847.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:07.123Z,1516707847.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:07.510Z,1516707847.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:07.525Z,1516707847.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:07.908Z,1516707847.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:07.923Z,1516707847.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:08.304Z,1516707848.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:08.319Z,1516707848.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:08.704Z,1516707848.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:08.719Z,1516707848.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:09.104Z,1516707849.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:09.125Z,1516707849.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:09.506Z,1516707849.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:09.521Z,1516707849.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:09.902Z,1516707849.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:09.929Z,1516707849.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:10.319Z,1516707850.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:10.334Z,1516707850.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:10.715Z,1516707850.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:10.730Z,1516707850.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:11.111Z,1516707851.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:11.126Z,1516707851.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:11.509Z,1516707851.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:11.524Z,1516707851.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:11.905Z,1516707851.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:11.920Z,1516707851.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:12.306Z,1516707852.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:12.321Z,1516707852.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:12.705Z,1516707852.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:12.725Z,1516707852.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:13.123Z,1516707853.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:13.138Z,1516707853.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:13.511Z,1516707853.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:13.526Z,1516707853.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:13.910Z,1516707853.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:13.929Z,1516707853.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:14.305Z,1516707854.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:14.320Z,1516707854.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:14.706Z,1516707854.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:14.720Z,1516707854.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:15.104Z,1516707855.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:15.119Z,1516707855.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:15.500Z,1516707855.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:15.533Z,1516707855.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:15.909Z,1516707855.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:15.925Z,1516707855.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:16.314Z,1516707856.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:16.329Z,1516707856.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:16.714Z,1516707856.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:16.737Z,1516707856.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:17.115Z,1516707857.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:17.136Z,1516707857.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:17.506Z,1516707857.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:17.521Z,1516707857.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:17.900Z,1516707857.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:17.931Z,1516707857.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:18.310Z,1516707858.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:18.325Z,1516707858.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:18.708Z,1516707858.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:18.724Z,1516707858.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:19.115Z,1516707859.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:19.130Z,1516707859.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:19.518Z,1516707859.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:19.533Z,1516707859.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:19.915Z,1516707859.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:19.930Z,1516707859.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:20.300Z,1516707860.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:20.329Z,1516707860.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:20.704Z,1516707860.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:20.733Z,1516707860.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:21.109Z,1516707861.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:21.129Z,1516707861.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:21.501Z,1516707861.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:21.524Z,1516707861.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:21.905Z,1516707861.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:21.920Z,1516707861.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:22.319Z,1516707862.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:22.341Z,1516707862.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:22.722Z,1516707862.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:22.737Z,1516707862.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:23.120Z,1516707863.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:23.135Z,1516707863.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:23.510Z,1516707863.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:23.525Z,1516707863.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:23.897Z,1516707863.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:23.929Z,1516707863.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:24.298Z,1516707864.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:24.325Z,1516707864.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:24.697Z,1516707864.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:24.729Z,1516707864.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:25.117Z,1516707865.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:25.137Z,1516707865.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:25.524Z,1516707865.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:25.538Z,1516707865.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:25.539Z,1516707865.539 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169 2018-01-23T11:44:25.539Z,1516707865.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:44:25.540Z,1516707865.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:25.541Z,1516707865.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 169 2018-01-23T11:44:25.541Z,1516707865.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:44:25.542Z,1516707865.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:25.542Z,1516707865.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169 2018-01-23T11:44:25.542Z,1516707865.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:44:25.587Z,1516707865.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:44:25.587Z,1516707865.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:44:25.588Z,1516707865.588 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:44:25.588Z,1516707865.588 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:44:25.913Z,1516707865.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:25.945Z,1516707865.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:44:25.945Z,1516707865.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169 2018-01-23T11:44:25.945Z,1516707865.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:44:25.945Z,1516707865.945 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 169 2018-01-23T11:44:25.946Z,1516707865.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:44:25.946Z,1516707865.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169 2018-01-23T11:44:26.296Z,1516707866.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:26.324Z,1516707866.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:44:26.324Z,1516707866.324 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:44:26.325Z,1516707866.325 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:44:26.325Z,1516707866.325 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:44:26.325Z,1516707866.325 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:44:26.326Z,1516707866.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:44:26.326Z,1516707866.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:44:26.327Z,1516707866.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:44:26.327Z,1516707866.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:44:26.695Z,1516707866.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:26.735Z,1516707866.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:44:26.736Z,1516707866.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:27.100Z,1516707867.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:27.127Z,1516707867.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:44:27.128Z,1516707867.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:27.497Z,1516707867.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:27.525Z,1516707867.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:44:27.526Z,1516707867.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:27.896Z,1516707867.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:27.927Z,1516707867.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:44:27.928Z,1516707867.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:28.307Z,1516707868.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:28.334Z,1516707868.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:44:28.335Z,1516707868.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:28.711Z,1516707868.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:28.746Z,1516707868.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:44:28.747Z,1516707868.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:29.106Z,1516707869.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:29.141Z,1516707869.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:44:29.142Z,1516707869.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:29.498Z,1516707869.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:29.513Z,1516707869.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:44:29.514Z,1516707869.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:29.897Z,1516707869.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:29.916Z,1516707869.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:44:29.917Z,1516707869.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:30.302Z,1516707870.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:30.316Z,1516707870.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:44:30.317Z,1516707870.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:30.701Z,1516707870.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:30.716Z,1516707870.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:44:30.717Z,1516707870.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:31.112Z,1516707871.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:31.126Z,1516707871.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:44:31.139Z,1516707871.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:31.515Z,1516707871.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:31.530Z,1516707871.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:44:31.552Z,1516707871.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:34.620Z,1516707874.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:34.650Z,1516707874.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T11:44:34.651Z,1516707874.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:34.751Z,1516707874.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:34.790Z,1516707874.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T11:44:34.791Z,1516707874.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:35.099Z,1516707875.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:35.114Z,1516707875.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:44:35.115Z,1516707875.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:35.502Z,1516707875.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:35.529Z,1516707875.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:44:35.530Z,1516707875.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:35.904Z,1516707875.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:35.919Z,1516707875.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:44:35.920Z,1516707875.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:36.305Z,1516707876.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:36.325Z,1516707876.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:44:36.325Z,1516707876.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:36.707Z,1516707876.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:36.722Z,1516707876.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:44:36.723Z,1516707876.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:37.105Z,1516707877.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:37.124Z,1516707877.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:44:37.125Z,1516707877.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:37.499Z,1516707877.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:37.520Z,1516707877.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:44:37.521Z,1516707877.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:37.902Z,1516707877.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:37.924Z,1516707877.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:44:37.925Z,1516707877.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:38.300Z,1516707878.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:38.319Z,1516707878.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:44:38.320Z,1516707878.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:38.702Z,1516707878.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:38.716Z,1516707878.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:44:38.717Z,1516707878.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:39.119Z,1516707879.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:39.154Z,1516707879.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:44:39.155Z,1516707879.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:39.507Z,1516707879.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:39.522Z,1516707879.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:44:39.523Z,1516707879.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:39.907Z,1516707879.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:39.922Z,1516707879.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:44:39.923Z,1516707879.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:40.302Z,1516707880.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:40.317Z,1516707880.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:44:40.318Z,1516707880.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:40.700Z,1516707880.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:40.719Z,1516707880.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:44:40.720Z,1516707880.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:41.097Z,1516707881.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:41.124Z,1516707881.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:44:41.125Z,1516707881.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:41.501Z,1516707881.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:41.522Z,1516707881.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:44:41.523Z,1516707881.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:41.896Z,1516707881.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:41.919Z,1516707881.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:44:41.920Z,1516707881.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:42.311Z,1516707882.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:42.332Z,1516707882.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:44:42.333Z,1516707882.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:42.711Z,1516707882.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:42.726Z,1516707882.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:44:42.727Z,1516707882.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:43.110Z,1516707883.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:43.125Z,1516707883.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:44:43.126Z,1516707883.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:43.500Z,1516707883.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:43.515Z,1516707883.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:44:43.516Z,1516707883.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:43.901Z,1516707883.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:43.916Z,1516707883.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:44:43.917Z,1516707883.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:44.296Z,1516707884.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:44.323Z,1516707884.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:44:44.324Z,1516707884.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:44.696Z,1516707884.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:44.718Z,1516707884.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:44:44.720Z,1516707884.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:45.112Z,1516707885.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:45.127Z,1516707885.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:44:45.128Z,1516707885.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:45.514Z,1516707885.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:45.529Z,1516707885.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:44:45.530Z,1516707885.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:45.911Z,1516707885.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:45.926Z,1516707885.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:46.292Z,1516707886.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:46.328Z,1516707886.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:46.692Z,1516707886.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:46.725Z,1516707886.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:47.092Z,1516707887.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:47.118Z,1516707887.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:47.493Z,1516707887.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:47.529Z,1516707887.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:47.892Z,1516707887.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:47.925Z,1516707887.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:48.308Z,1516707888.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:48.331Z,1516707888.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:48.716Z,1516707888.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:48.731Z,1516707888.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:49.111Z,1516707889.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:49.126Z,1516707889.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:49.493Z,1516707889.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:49.529Z,1516707889.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:49.892Z,1516707889.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:49.930Z,1516707889.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:50.297Z,1516707890.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:50.324Z,1516707890.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:50.692Z,1516707890.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:50.729Z,1516707890.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:51.114Z,1516707891.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:51.139Z,1516707891.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:51.513Z,1516707891.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:51.533Z,1516707891.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:51.907Z,1516707891.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:51.938Z,1516707891.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:52.293Z,1516707892.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:52.327Z,1516707892.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:52.697Z,1516707892.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:52.723Z,1516707892.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:53.092Z,1516707893.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:53.132Z,1516707893.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:53.493Z,1516707893.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:53.530Z,1516707893.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:53.896Z,1516707893.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:53.929Z,1516707893.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:54.303Z,1516707894.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:54.339Z,1516707894.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:54.711Z,1516707894.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:54.741Z,1516707894.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:55.103Z,1516707895.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:55.139Z,1516707895.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:55.492Z,1516707895.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:55.530Z,1516707895.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:55.892Z,1516707895.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:55.931Z,1516707895.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:56.297Z,1516707896.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:56.329Z,1516707896.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:56.692Z,1516707896.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:56.729Z,1516707896.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:57.103Z,1516707897.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:57.139Z,1516707897.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:57.516Z,1516707897.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:57.531Z,1516707897.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:57.903Z,1516707897.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:57.937Z,1516707897.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:58.293Z,1516707898.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:58.330Z,1516707898.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:58.697Z,1516707898.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:58.728Z,1516707898.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:59.103Z,1516707899.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:59.137Z,1516707899.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:59.519Z,1516707899.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:59.534Z,1516707899.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:44:59.903Z,1516707899.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:44:59.930Z,1516707899.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:00.293Z,1516707900.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:00.320Z,1516707900.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:00.692Z,1516707900.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:00.707Z,1516707900.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:01.103Z,1516707901.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:01.135Z,1516707901.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:01.515Z,1516707901.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:01.541Z,1516707901.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:01.907Z,1516707901.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:01.944Z,1516707901.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:02.301Z,1516707902.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:02.316Z,1516707902.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:02.697Z,1516707902.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:02.712Z,1516707902.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:03.111Z,1516707903.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:03.146Z,1516707903.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:03.515Z,1516707903.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:03.540Z,1516707903.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:03.915Z,1516707903.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:03.940Z,1516707903.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:04.305Z,1516707904.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:04.320Z,1516707904.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:04.701Z,1516707904.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:04.721Z,1516707904.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:05.099Z,1516707905.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:05.115Z,1516707905.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:05.497Z,1516707905.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:05.525Z,1516707905.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:05.898Z,1516707905.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:05.913Z,1516707905.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:06.307Z,1516707906.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:06.323Z,1516707906.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:06.707Z,1516707906.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:06.722Z,1516707906.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:07.103Z,1516707907.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:07.118Z,1516707907.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:07.505Z,1516707907.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:07.520Z,1516707907.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:07.901Z,1516707907.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:07.916Z,1516707907.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:08.300Z,1516707908.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:08.315Z,1516707908.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:08.698Z,1516707908.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:08.718Z,1516707908.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:09.107Z,1516707909.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:09.122Z,1516707909.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:09.508Z,1516707909.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:09.525Z,1516707909.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:09.905Z,1516707909.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:09.925Z,1516707909.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:10.302Z,1516707910.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:10.316Z,1516707910.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:10.700Z,1516707910.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:10.715Z,1516707910.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:11.105Z,1516707911.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:11.125Z,1516707911.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:11.507Z,1516707911.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:11.522Z,1516707911.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:11.908Z,1516707911.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:11.922Z,1516707911.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:12.297Z,1516707912.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:12.324Z,1516707912.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:12.701Z,1516707912.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:12.716Z,1516707912.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:13.106Z,1516707913.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:13.125Z,1516707913.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:13.507Z,1516707913.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:13.522Z,1516707913.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:13.906Z,1516707913.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:13.928Z,1516707913.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:14.304Z,1516707914.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:14.319Z,1516707914.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:14.700Z,1516707914.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:14.715Z,1516707914.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:15.106Z,1516707915.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:15.128Z,1516707915.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:15.511Z,1516707915.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:15.526Z,1516707915.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:15.906Z,1516707915.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:15.921Z,1516707915.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:16.306Z,1516707916.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:16.321Z,1516707916.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:16.701Z,1516707916.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:16.716Z,1516707916.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:17.106Z,1516707917.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:17.121Z,1516707917.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:17.508Z,1516707917.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:17.522Z,1516707917.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:17.906Z,1516707917.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:17.921Z,1516707917.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:18.297Z,1516707918.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:18.324Z,1516707918.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:18.703Z,1516707918.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:18.718Z,1516707918.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:19.110Z,1516707919.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:19.126Z,1516707919.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:19.515Z,1516707919.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:19.530Z,1516707919.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:19.913Z,1516707919.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:19.928Z,1516707919.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:20.297Z,1516707920.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:20.321Z,1516707920.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:20.696Z,1516707920.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:20.743Z,1516707920.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:21.118Z,1516707921.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:21.132Z,1516707921.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:21.504Z,1516707921.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:21.541Z,1516707921.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:21.903Z,1516707921.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:21.939Z,1516707921.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:22.293Z,1516707922.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:22.332Z,1516707922.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:22.690Z,1516707922.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:22.705Z,1516707922.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:23.103Z,1516707923.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:23.130Z,1516707923.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:23.507Z,1516707923.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:23.545Z,1516707923.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:23.907Z,1516707923.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:23.934Z,1516707923.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:24.293Z,1516707924.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:24.308Z,1516707924.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:24.692Z,1516707924.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:24.707Z,1516707924.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:25.107Z,1516707925.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:25.134Z,1516707925.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:25.511Z,1516707925.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:25.546Z,1516707925.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:25.911Z,1516707925.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:25.946Z,1516707925.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:26.301Z,1516707926.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:26.317Z,1516707926.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:26.697Z,1516707926.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:26.725Z,1516707926.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:27.114Z,1516707927.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:27.129Z,1516707927.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:27.503Z,1516707927.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:27.519Z,1516707927.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:27.904Z,1516707927.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:27.918Z,1516707927.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:28.301Z,1516707928.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:28.320Z,1516707928.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:28.701Z,1516707928.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:28.716Z,1516707928.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:29.104Z,1516707929.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:29.119Z,1516707929.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:29.507Z,1516707929.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:29.522Z,1516707929.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:29.904Z,1516707929.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:29.919Z,1516707929.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:30.298Z,1516707930.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:30.330Z,1516707930.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:30.705Z,1516707930.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:30.720Z,1516707930.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:31.108Z,1516707931.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:31.135Z,1516707931.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:31.514Z,1516707931.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:31.529Z,1516707931.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:31.903Z,1516707931.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:31.919Z,1516707931.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:35.064Z,1516707935.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:35.088Z,1516707935.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:35.196Z,1516707935.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:35.241Z,1516707935.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:35.542Z,1516707935.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:35.561Z,1516707935.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:35.955Z,1516707935.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:35.988Z,1516707935.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:36.344Z,1516707936.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:36.359Z,1516707936.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:36.742Z,1516707936.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:36.757Z,1516707936.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:37.137Z,1516707937.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:37.152Z,1516707937.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:37.536Z,1516707937.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:37.559Z,1516707937.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:37.936Z,1516707937.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:37.957Z,1516707937.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:38.347Z,1516707938.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:38.368Z,1516707938.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:38.748Z,1516707938.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:38.769Z,1516707938.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:39.147Z,1516707939.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:39.162Z,1516707939.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:39.538Z,1516707939.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:39.560Z,1516707939.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:39.940Z,1516707939.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:39.961Z,1516707939.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:40.341Z,1516707940.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:40.356Z,1516707940.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:40.737Z,1516707940.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:40.752Z,1516707940.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:41.147Z,1516707941.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:41.162Z,1516707941.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:41.550Z,1516707941.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:41.565Z,1516707941.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:41.948Z,1516707941.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:41.963Z,1516707941.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:42.333Z,1516707942.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:42.356Z,1516707942.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:42.732Z,1516707942.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:42.754Z,1516707942.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:43.148Z,1516707943.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:43.163Z,1516707943.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:43.550Z,1516707943.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:43.565Z,1516707943.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:43.947Z,1516707943.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:43.962Z,1516707943.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:44.338Z,1516707944.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:44.356Z,1516707944.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:44.729Z,1516707944.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:44.761Z,1516707944.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:45.155Z,1516707945.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:45.170Z,1516707945.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:45.555Z,1516707945.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:45.569Z,1516707945.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:45.951Z,1516707945.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:45.966Z,1516707945.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:46.342Z,1516707946.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:46.357Z,1516707946.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:46.729Z,1516707946.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:46.770Z,1516707946.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:47.149Z,1516707947.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:47.169Z,1516707947.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:47.554Z,1516707947.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:47.569Z,1516707947.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:47.947Z,1516707947.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:47.972Z,1516707947.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:48.329Z,1516707948.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:48.362Z,1516707948.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:48.728Z,1516707948.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:48.755Z,1516707948.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:49.146Z,1516707949.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:49.177Z,1516707949.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:49.552Z,1516707949.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:49.573Z,1516707949.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:49.947Z,1516707949.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:49.963Z,1516707949.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:50.329Z,1516707950.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:50.369Z,1516707950.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:50.732Z,1516707950.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:50.758Z,1516707950.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:51.148Z,1516707951.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:51.162Z,1516707951.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:51.550Z,1516707951.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:51.578Z,1516707951.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:51.951Z,1516707951.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:51.966Z,1516707951.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:52.330Z,1516707952.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:52.364Z,1516707952.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:52.732Z,1516707952.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:52.760Z,1516707952.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:53.148Z,1516707953.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:53.163Z,1516707953.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:53.550Z,1516707953.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:53.573Z,1516707953.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:53.938Z,1516707953.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:53.964Z,1516707953.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:54.333Z,1516707954.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:54.360Z,1516707954.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:54.727Z,1516707954.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:54.761Z,1516707954.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:55.147Z,1516707955.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:55.167Z,1516707955.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:55.549Z,1516707955.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:55.569Z,1516707955.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:55.947Z,1516707955.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:55.962Z,1516707955.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:56.337Z,1516707956.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:56.364Z,1516707956.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:56.733Z,1516707956.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:56.765Z,1516707956.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:57.143Z,1516707957.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:57.178Z,1516707957.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:57.556Z,1516707957.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:57.571Z,1516707957.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:57.952Z,1516707957.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:57.973Z,1516707957.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:58.369Z,1516707958.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:58.409Z,1516707958.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:58.730Z,1516707958.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:58.782Z,1516707958.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:59.158Z,1516707959.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:59.185Z,1516707959.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:59.558Z,1516707959.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:59.581Z,1516707959.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:45:59.941Z,1516707959.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:45:59.992Z,1516707959.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:00.373Z,1516707960.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:00.418Z,1516707960.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:00.768Z,1516707960.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:00.791Z,1516707960.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:01.145Z,1516707961.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:01.200Z,1516707961.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:01.547Z,1516707961.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:01.573Z,1516707961.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:01.974Z,1516707961.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:01.989Z,1516707961.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:02.354Z,1516707962.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:02.394Z,1516707962.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:02.735Z,1516707962.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:02.750Z,1516707962.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:03.146Z,1516707963.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:03.169Z,1516707963.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:03.551Z,1516707963.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:03.566Z,1516707963.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:03.947Z,1516707963.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:03.962Z,1516707963.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:04.332Z,1516707964.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:04.355Z,1516707964.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:04.737Z,1516707964.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:04.757Z,1516707964.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:05.130Z,1516707965.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:05.157Z,1516707965.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:05.562Z,1516707965.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:05.594Z,1516707965.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:05.948Z,1516707965.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:05.969Z,1516707965.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:06.344Z,1516707966.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:06.393Z,1516707966.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:06.754Z,1516707966.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:06.806Z,1516707966.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:07.142Z,1516707967.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:07.212Z,1516707967.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:07.531Z,1516707967.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:07.570Z,1516707967.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:07.934Z,1516707967.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:07.973Z,1516707967.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:08.345Z,1516707968.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:08.401Z,1516707968.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:08.750Z,1516707968.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:08.789Z,1516707968.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:09.153Z,1516707969.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:09.205Z,1516707969.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:09.543Z,1516707969.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:09.608Z,1516707969.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:09.940Z,1516707969.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:09.965Z,1516707969.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:10.366Z,1516707970.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:10.394Z,1516707970.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:10.748Z,1516707970.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:10.808Z,1516707970.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:11.142Z,1516707971.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:11.162Z,1516707971.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:11.550Z,1516707971.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:11.596Z,1516707971.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:11.949Z,1516707971.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:12.000Z,1516707972.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:12.343Z,1516707972.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:12.367Z,1516707972.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:12.743Z,1516707972.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:12.762Z,1516707972.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:13.130Z,1516707973.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:13.165Z,1516707973.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:13.550Z,1516707973.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:13.574Z,1516707973.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:13.957Z,1516707973.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:13.981Z,1516707973.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:14.341Z,1516707974.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:14.407Z,1516707974.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:14.730Z,1516707974.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:14.772Z,1516707974.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:15.159Z,1516707975.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:15.191Z,1516707975.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:15.537Z,1516707975.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:15.581Z,1516707975.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:15.938Z,1516707975.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:15.964Z,1516707975.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:16.348Z,1516707976.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:16.401Z,1516707976.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:16.754Z,1516707976.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:16.787Z,1516707976.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:17.154Z,1516707977.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:17.181Z,1516707977.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:17.534Z,1516707977.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:17.581Z,1516707977.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:17.934Z,1516707977.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:17.985Z,1516707977.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:18.328Z,1516707978.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:18.349Z,1516707978.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:18.734Z,1516707978.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:18.749Z,1516707978.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:19.133Z,1516707979.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:19.148Z,1516707979.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:19.551Z,1516707979.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:19.576Z,1516707979.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:19.966Z,1516707979.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:19.989Z,1516707979.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:20.350Z,1516707980.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:20.380Z,1516707980.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:20.730Z,1516707980.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:20.745Z,1516707980.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:21.133Z,1516707981.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:21.149Z,1516707981.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:21.541Z,1516707981.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:21.556Z,1516707981.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:21.930Z,1516707981.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:21.945Z,1516707981.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:22.351Z,1516707982.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:22.376Z,1516707982.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:22.751Z,1516707982.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:22.778Z,1516707982.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:23.144Z,1516707983.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:23.175Z,1516707983.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:23.536Z,1516707983.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:23.557Z,1516707983.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:23.938Z,1516707983.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:23.953Z,1516707983.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:24.334Z,1516707984.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:24.358Z,1516707984.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:24.736Z,1516707984.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:24.752Z,1516707984.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:25.138Z,1516707985.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:25.154Z,1516707985.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:25.539Z,1516707985.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:25.555Z,1516707985.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:25.943Z,1516707985.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:25.959Z,1516707985.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:26.338Z,1516707986.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:26.373Z,1516707986.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:26.726Z,1516707986.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:26.741Z,1516707986.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:27.128Z,1516707987.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:27.169Z,1516707987.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:27.529Z,1516707987.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:27.564Z,1516707987.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:27.930Z,1516707987.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:27.945Z,1516707987.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:28.350Z,1516707988.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:28.373Z,1516707988.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:28.751Z,1516707988.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:28.766Z,1516707988.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:29.147Z,1516707989.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:29.162Z,1516707989.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:29.528Z,1516707989.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:29.564Z,1516707989.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:29.928Z,1516707989.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:29.965Z,1516707989.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:30.332Z,1516707990.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:30.358Z,1516707990.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:30.729Z,1516707990.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:30.756Z,1516707990.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:31.128Z,1516707991.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:31.166Z,1516707991.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:31.539Z,1516707991.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:31.574Z,1516707991.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:31.959Z,1516707991.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:31.974Z,1516707991.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:35.049Z,1516707995.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:35.069Z,1516707995.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:35.164Z,1516707995.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:35.181Z,1516707995.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:35.525Z,1516707995.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:35.540Z,1516707995.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:35.922Z,1516707995.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:35.944Z,1516707995.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:36.331Z,1516707996.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:36.346Z,1516707996.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:36.739Z,1516707996.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:36.770Z,1516707996.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:37.138Z,1516707997.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:37.153Z,1516707997.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:37.520Z,1516707997.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:37.535Z,1516707997.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:37.924Z,1516707997.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:37.945Z,1516707997.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:38.326Z,1516707998.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:38.341Z,1516707998.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:38.725Z,1516707998.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:38.740Z,1516707998.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:39.121Z,1516707999.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:39.136Z,1516707999.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:39.527Z,1516707999.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:39.542Z,1516707999.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:39.932Z,1516707999.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:39.953Z,1516707999.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:40.332Z,1516708000.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:40.347Z,1516708000.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:40.721Z,1516708000.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:40.737Z,1516708000.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:41.129Z,1516708001.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:41.144Z,1516708001.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:41.524Z,1516708001.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:41.539Z,1516708001.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:41.923Z,1516708001.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:41.952Z,1516708001.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:42.332Z,1516708002.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:42.348Z,1516708002.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:42.730Z,1516708002.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:42.746Z,1516708002.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:43.131Z,1516708003.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:43.146Z,1516708003.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:43.521Z,1516708003.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:43.541Z,1516708003.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:43.929Z,1516708003.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:43.944Z,1516708003.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:44.322Z,1516708004.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:44.336Z,1516708004.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:44.718Z,1516708004.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:44.746Z,1516708004.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:45.114Z,1516708005.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:45.141Z,1516708005.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:45.536Z,1516708005.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:45.556Z,1516708005.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:45.938Z,1516708005.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:45.961Z,1516708005.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:46.342Z,1516708006.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:46.365Z,1516708006.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:46.729Z,1516708006.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:46.744Z,1516708006.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:47.129Z,1516708007.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:47.149Z,1516708007.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:47.514Z,1516708007.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:47.540Z,1516708007.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:47.916Z,1516708007.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:47.952Z,1516708007.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:48.339Z,1516708008.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:48.354Z,1516708008.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:48.742Z,1516708008.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:48.765Z,1516708008.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:49.137Z,1516708009.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:49.152Z,1516708009.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:49.514Z,1516708009.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:49.542Z,1516708009.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:49.914Z,1516708009.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:49.953Z,1516708009.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:50.320Z,1516708010.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:50.348Z,1516708010.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:50.712Z,1516708010.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:50.739Z,1516708010.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:51.113Z,1516708011.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:51.179Z,1516708011.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:51.524Z,1516708011.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:51.564Z,1516708011.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:51.935Z,1516708011.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:51.950Z,1516708011.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:52.344Z,1516708012.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:52.360Z,1516708012.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:52.712Z,1516708012.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:52.750Z,1516708012.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:53.115Z,1516708013.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:53.146Z,1516708013.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:53.516Z,1516708013.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:53.547Z,1516708013.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:53.920Z,1516708013.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:53.961Z,1516708013.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:54.329Z,1516708014.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:54.356Z,1516708014.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:54.728Z,1516708014.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:54.754Z,1516708014.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:55.123Z,1516708015.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:55.162Z,1516708015.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:55.515Z,1516708015.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:55.530Z,1516708015.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:55.921Z,1516708015.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:55.955Z,1516708015.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:56.327Z,1516708016.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:56.341Z,1516708016.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:56.715Z,1516708016.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:56.730Z,1516708016.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:57.123Z,1516708017.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:57.138Z,1516708017.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:57.537Z,1516708017.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:57.569Z,1516708017.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:57.936Z,1516708017.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:57.965Z,1516708017.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:58.328Z,1516708018.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:58.343Z,1516708018.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:58.724Z,1516708018.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:58.738Z,1516708018.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:59.120Z,1516708019.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:59.164Z,1516708019.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:59.523Z,1516708019.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:59.531Z,1516708019.531 [PNI_TCM](ERROR): CRC does not match. Expected:0x49886 got:0x47801 2018-01-23T11:46:59.567Z,1516708019.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:46:59.921Z,1516708019.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:46:59.954Z,1516708019.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:00.328Z,1516708020.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:00.344Z,1516708020.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:00.728Z,1516708020.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:00.746Z,1516708020.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:01.128Z,1516708021.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:01.148Z,1516708021.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:01.518Z,1516708021.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:01.542Z,1516708021.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:01.917Z,1516708021.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:01.940Z,1516708021.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:02.321Z,1516708022.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:02.363Z,1516708022.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:02.718Z,1516708022.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:02.729Z,1516708022.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x24513 got:0x57515 2018-01-23T11:47:02.767Z,1516708022.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:03.121Z,1516708023.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:03.149Z,1516708023.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:03.532Z,1516708023.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:03.553Z,1516708023.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:03.932Z,1516708023.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:03.950Z,1516708023.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:04.332Z,1516708024.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:04.353Z,1516708024.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:04.724Z,1516708024.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:04.747Z,1516708024.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:05.123Z,1516708025.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:05.143Z,1516708025.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:05.513Z,1516708025.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:05.553Z,1516708025.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:05.928Z,1516708025.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:05.945Z,1516708025.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:06.329Z,1516708026.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:06.352Z,1516708026.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:06.732Z,1516708026.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:06.759Z,1516708026.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:07.132Z,1516708027.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:07.182Z,1516708027.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:07.516Z,1516708027.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:07.539Z,1516708027.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x23916 got:0x7234 2018-01-23T11:47:07.565Z,1516708027.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:07.917Z,1516708027.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:07.946Z,1516708027.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:08.314Z,1516708028.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:08.355Z,1516708028.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:08.713Z,1516708028.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:08.757Z,1516708028.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:09.116Z,1516708029.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:09.146Z,1516708029.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:09.534Z,1516708029.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:09.550Z,1516708029.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:09.937Z,1516708029.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:09.952Z,1516708029.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:10.339Z,1516708030.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:10.381Z,1516708030.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:10.713Z,1516708030.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:10.748Z,1516708030.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:11.113Z,1516708031.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:11.149Z,1516708031.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:11.519Z,1516708031.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:11.546Z,1516708031.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:11.913Z,1516708031.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:11.955Z,1516708031.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:12.324Z,1516708032.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:12.357Z,1516708032.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:12.732Z,1516708032.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:12.757Z,1516708032.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:13.125Z,1516708033.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:13.166Z,1516708033.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:13.512Z,1516708033.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:13.552Z,1516708033.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:13.912Z,1516708033.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:13.952Z,1516708033.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:14.313Z,1516708034.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:14.344Z,1516708034.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:14.713Z,1516708034.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:14.744Z,1516708034.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:15.125Z,1516708035.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:15.159Z,1516708035.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:15.545Z,1516708035.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:15.562Z,1516708035.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:15.940Z,1516708035.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:15.961Z,1516708035.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:16.333Z,1516708036.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:16.363Z,1516708036.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:16.717Z,1516708036.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:16.745Z,1516708036.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:17.120Z,1516708037.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:17.139Z,1516708037.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:17.522Z,1516708037.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:17.556Z,1516708037.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:17.917Z,1516708037.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:17.936Z,1516708037.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:18.327Z,1516708038.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:18.342Z,1516708038.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:18.728Z,1516708038.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:18.744Z,1516708038.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:19.127Z,1516708039.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:19.147Z,1516708039.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:19.520Z,1516708039.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:19.540Z,1516708039.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:19.928Z,1516708039.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:19.974Z,1516708039.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:20.321Z,1516708040.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:20.336Z,1516708040.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:20.720Z,1516708040.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:20.742Z,1516708040.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:21.120Z,1516708041.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:21.140Z,1516708041.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:21.526Z,1516708041.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:21.541Z,1516708041.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:21.927Z,1516708041.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:21.942Z,1516708041.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:22.327Z,1516708042.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:22.344Z,1516708042.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:22.722Z,1516708042.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:22.741Z,1516708042.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:23.121Z,1516708043.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:23.136Z,1516708043.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:23.516Z,1516708043.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:23.549Z,1516708043.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:23.926Z,1516708043.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:23.940Z,1516708043.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:24.330Z,1516708044.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:24.375Z,1516708044.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:24.735Z,1516708044.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:24.750Z,1516708044.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:25.131Z,1516708045.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:25.152Z,1516708045.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:25.522Z,1516708045.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:25.537Z,1516708045.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:25.916Z,1516708045.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:25.942Z,1516708045.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:26.339Z,1516708046.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:26.354Z,1516708046.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:26.354Z,1516708046.354 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170 2018-01-23T11:47:26.354Z,1516708046.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:47:26.356Z,1516708046.356 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:26.356Z,1516708046.356 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 170 2018-01-23T11:47:26.356Z,1516708046.356 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:47:26.358Z,1516708046.358 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:26.358Z,1516708046.358 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170 2018-01-23T11:47:26.358Z,1516708046.358 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:47:26.397Z,1516708046.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:47:26.397Z,1516708046.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:47:26.398Z,1516708046.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:47:26.736Z,1516708046.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:26.765Z,1516708046.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:47:26.765Z,1516708046.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170 2018-01-23T11:47:26.766Z,1516708046.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:47:26.766Z,1516708046.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 170 2018-01-23T11:47:26.766Z,1516708046.766 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:47:26.766Z,1516708046.766 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170 2018-01-23T11:47:27.131Z,1516708047.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:27.151Z,1516708047.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:47:27.152Z,1516708047.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:47:27.153Z,1516708047.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:47:27.153Z,1516708047.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:47:27.154Z,1516708047.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:47:27.155Z,1516708047.155 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:47:27.155Z,1516708047.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:47:27.156Z,1516708047.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:47:27.157Z,1516708047.157 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:47:27.513Z,1516708047.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:27.554Z,1516708047.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:47:27.555Z,1516708047.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:27.912Z,1516708047.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:27.948Z,1516708047.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:47:27.949Z,1516708047.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:28.323Z,1516708048.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:28.359Z,1516708048.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:47:28.361Z,1516708048.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:28.737Z,1516708048.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:28.754Z,1516708048.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:47:28.756Z,1516708048.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:29.123Z,1516708049.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:29.161Z,1516708049.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:47:29.162Z,1516708049.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:29.513Z,1516708049.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:29.544Z,1516708049.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:47:29.545Z,1516708049.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:29.920Z,1516708049.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:29.955Z,1516708049.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:47:29.956Z,1516708049.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:29.959Z,1516708049.959 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:42:29.6Z 2018-01-23T11:47:29.959Z,1516708049.959 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:47:29.959Z,1516708049.959 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:47:30.327Z,1516708050.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:30.356Z,1516708050.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:47:30.357Z,1516708050.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:30.860Z,1516708050.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:30.875Z,1516708050.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T11:47:30.876Z,1516708050.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:31.124Z,1516708051.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:31.152Z,1516708051.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:47:31.153Z,1516708051.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:34.294Z,1516708054.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:34.309Z,1516708054.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:47:34.310Z,1516708054.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:34.389Z,1516708054.389 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0200.lzma 2018-01-23T11:47:34.420Z,1516708054.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:34.439Z,1516708054.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T11:47:34.440Z,1516708054.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:34.772Z,1516708054.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:34.789Z,1516708054.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:47:34.789Z,1516708054.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:35.133Z,1516708055.133 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0200.lzma.bak 2018-01-23T11:47:35.134Z,1516708055.134 [DataOverHttps](INFO): SBD MOMSN=7755519 2018-01-23T11:47:35.181Z,1516708055.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:35.204Z,1516708055.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T11:47:35.205Z,1516708055.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:35.813Z,1516708055.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:35.827Z,1516708055.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T11:47:35.828Z,1516708055.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:35.957Z,1516708055.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:35.996Z,1516708055.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:47:35.997Z,1516708055.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:39.123Z,1516708059.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:39.138Z,1516708059.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:47:39.139Z,1516708059.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:39.241Z,1516708059.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:39.275Z,1516708059.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T11:47:39.276Z,1516708059.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:39.648Z,1516708059.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:39.676Z,1516708059.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T11:47:39.677Z,1516708059.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:40.047Z,1516708060.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:40.073Z,1516708060.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T11:47:40.074Z,1516708060.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:40.431Z,1516708060.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:40.446Z,1516708060.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T11:47:40.447Z,1516708060.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:40.828Z,1516708060.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:40.846Z,1516708060.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T11:47:40.851Z,1516708060.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:43.924Z,1516708063.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:43.939Z,1516708063.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:47:43.940Z,1516708063.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:44.019Z,1516708064.019 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0201.lzma 2018-01-23T11:47:44.052Z,1516708064.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:44.067Z,1516708064.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T11:47:44.068Z,1516708064.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:44.401Z,1516708064.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:44.416Z,1516708064.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T11:47:44.417Z,1516708064.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:44.761Z,1516708064.761 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0201.lzma.bak 2018-01-23T11:47:44.762Z,1516708064.762 [DataOverHttps](INFO): SBD MOMSN=7755521 2018-01-23T11:47:44.808Z,1516708064.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:44.839Z,1516708064.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T11:47:44.840Z,1516708064.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:45.523Z,1516708065.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:45.554Z,1516708065.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:47:45.559Z,1516708065.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:45.562Z,1516708065.562 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:47:45.562Z,1516708065.562 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:47:45.562Z,1516708065.562 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:47:45.646Z,1516708065.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:45.669Z,1516708065.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T11:47:45.670Z,1516708065.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:48.774Z,1516708068.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:48.789Z,1516708068.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:48.886Z,1516708068.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:48.917Z,1516708068.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:49.284Z,1516708069.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:49.314Z,1516708069.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:49.683Z,1516708069.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:49.710Z,1516708069.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:50.072Z,1516708070.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:50.087Z,1516708070.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:50.468Z,1516708070.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:50.483Z,1516708070.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:50.869Z,1516708070.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:50.888Z,1516708070.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:51.269Z,1516708071.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:51.285Z,1516708071.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:51.676Z,1516708071.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:51.690Z,1516708071.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:52.075Z,1516708072.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:52.090Z,1516708072.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:52.472Z,1516708072.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:52.487Z,1516708072.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:52.867Z,1516708072.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:52.887Z,1516708072.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:53.269Z,1516708073.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:53.296Z,1516708073.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:53.671Z,1516708073.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:53.686Z,1516708073.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:54.066Z,1516708074.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:54.097Z,1516708074.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:54.476Z,1516708074.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:54.491Z,1516708074.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:54.873Z,1516708074.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:54.889Z,1516708074.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:55.273Z,1516708075.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:55.289Z,1516708075.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:55.672Z,1516708075.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:55.693Z,1516708075.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:56.064Z,1516708076.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:56.096Z,1516708076.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:56.464Z,1516708076.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:56.486Z,1516708076.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:56.864Z,1516708076.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:56.898Z,1516708076.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:57.270Z,1516708077.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:57.286Z,1516708077.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:57.678Z,1516708077.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:57.694Z,1516708077.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:58.080Z,1516708078.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:58.107Z,1516708078.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:58.476Z,1516708078.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:58.507Z,1516708078.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:58.872Z,1516708078.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:58.891Z,1516708078.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:59.261Z,1516708079.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:59.299Z,1516708079.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:47:59.673Z,1516708079.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:47:59.688Z,1516708079.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:00.060Z,1516708080.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:00.093Z,1516708080.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:00.476Z,1516708080.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:00.508Z,1516708080.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:00.876Z,1516708080.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:00.903Z,1516708080.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:01.283Z,1516708081.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:01.298Z,1516708081.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:01.661Z,1516708081.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:01.695Z,1516708081.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:02.060Z,1516708082.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:02.093Z,1516708082.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:02.464Z,1516708082.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:02.490Z,1516708082.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:02.861Z,1516708082.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:02.897Z,1516708082.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:03.264Z,1516708083.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:03.290Z,1516708083.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:03.679Z,1516708083.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:03.698Z,1516708083.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:04.082Z,1516708084.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:04.098Z,1516708084.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:04.475Z,1516708084.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:04.497Z,1516708084.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:04.864Z,1516708084.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:04.890Z,1516708084.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:05.261Z,1516708085.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:05.292Z,1516708085.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:05.661Z,1516708085.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:05.689Z,1516708085.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:06.060Z,1516708086.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:06.101Z,1516708086.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:06.479Z,1516708086.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:06.513Z,1516708086.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:06.875Z,1516708086.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:06.901Z,1516708086.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:07.271Z,1516708087.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:07.302Z,1516708087.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:07.673Z,1516708087.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:07.704Z,1516708087.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:08.073Z,1516708088.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:08.089Z,1516708088.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:08.466Z,1516708088.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:08.489Z,1516708088.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:08.871Z,1516708088.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:08.886Z,1516708088.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:09.266Z,1516708089.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:09.289Z,1516708089.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:09.688Z,1516708089.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:09.710Z,1516708089.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:10.075Z,1516708090.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:10.090Z,1516708090.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:10.484Z,1516708090.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:10.498Z,1516708090.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:10.868Z,1516708090.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:10.891Z,1516708090.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:11.275Z,1516708091.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:11.290Z,1516708091.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:11.678Z,1516708091.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:11.694Z,1516708091.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:12.070Z,1516708092.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:12.085Z,1516708092.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:12.480Z,1516708092.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:12.496Z,1516708092.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:12.884Z,1516708092.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:12.913Z,1516708092.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:13.288Z,1516708093.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:13.302Z,1516708093.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:13.660Z,1516708093.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:13.689Z,1516708093.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:14.060Z,1516708094.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:14.097Z,1516708094.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:14.465Z,1516708094.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:14.492Z,1516708094.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:14.865Z,1516708094.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:14.894Z,1516708094.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:15.260Z,1516708095.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:15.289Z,1516708095.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:15.683Z,1516708095.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:15.698Z,1516708095.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:16.083Z,1516708096.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:16.110Z,1516708096.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:16.487Z,1516708096.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:16.502Z,1516708096.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:16.868Z,1516708096.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:16.894Z,1516708096.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:17.261Z,1516708097.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:17.298Z,1516708097.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:17.798Z,1516708097.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:17.849Z,1516708097.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:18.069Z,1516708098.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:18.095Z,1516708098.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:18.486Z,1516708098.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:18.513Z,1516708098.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:18.888Z,1516708098.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:18.903Z,1516708098.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:19.272Z,1516708099.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:19.309Z,1516708099.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:19.669Z,1516708099.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:19.703Z,1516708099.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:20.069Z,1516708100.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:20.101Z,1516708100.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:20.460Z,1516708100.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:20.497Z,1516708100.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:20.867Z,1516708100.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:20.882Z,1516708100.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:21.266Z,1516708101.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:21.281Z,1516708101.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:21.684Z,1516708101.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:21.717Z,1516708101.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:22.079Z,1516708102.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:22.111Z,1516708102.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:22.479Z,1516708102.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:22.503Z,1516708102.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:22.870Z,1516708102.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:22.885Z,1516708102.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:23.272Z,1516708103.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:23.287Z,1516708103.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:23.676Z,1516708103.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:23.707Z,1516708103.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:24.067Z,1516708104.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:24.088Z,1516708104.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:24.479Z,1516708104.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:24.494Z,1516708104.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:24.883Z,1516708104.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:24.919Z,1516708104.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:25.279Z,1516708105.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:25.294Z,1516708105.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:25.672Z,1516708105.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:25.687Z,1516708105.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:26.071Z,1516708106.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:26.086Z,1516708106.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:26.493Z,1516708106.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:26.520Z,1516708106.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:26.873Z,1516708106.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:26.887Z,1516708106.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:27.274Z,1516708107.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:27.290Z,1516708107.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:27.683Z,1516708107.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:27.697Z,1516708107.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:28.083Z,1516708108.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:28.097Z,1516708108.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:28.482Z,1516708108.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:28.497Z,1516708108.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:28.865Z,1516708108.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:28.882Z,1516708108.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:29.263Z,1516708109.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:29.278Z,1516708109.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:29.670Z,1516708109.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:29.685Z,1516708109.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:30.066Z,1516708110.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:30.111Z,1516708110.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:30.477Z,1516708110.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:30.492Z,1516708110.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:30.876Z,1516708110.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:30.897Z,1516708110.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:31.280Z,1516708111.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:31.304Z,1516708111.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:31.665Z,1516708111.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:31.702Z,1516708111.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:32.061Z,1516708112.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:32.097Z,1516708112.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:32.462Z,1516708112.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:32.501Z,1516708112.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:32.868Z,1516708112.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:32.896Z,1516708112.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:33.268Z,1516708113.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:33.301Z,1516708113.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:33.672Z,1516708113.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:33.712Z,1516708113.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:34.087Z,1516708114.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:34.102Z,1516708114.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:34.473Z,1516708114.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:34.508Z,1516708114.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:34.863Z,1516708114.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:34.895Z,1516708114.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:35.260Z,1516708115.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:35.303Z,1516708115.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:35.667Z,1516708115.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:35.701Z,1516708115.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:36.063Z,1516708116.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:36.078Z,1516708116.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:36.493Z,1516708116.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:36.509Z,1516708116.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:36.876Z,1516708116.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:36.905Z,1516708116.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:37.278Z,1516708117.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:37.304Z,1516708117.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:37.662Z,1516708117.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:37.709Z,1516708117.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:38.067Z,1516708118.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:38.082Z,1516708118.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:38.465Z,1516708118.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:38.504Z,1516708118.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:38.866Z,1516708118.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:38.910Z,1516708118.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:39.271Z,1516708119.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:39.285Z,1516708119.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:39.679Z,1516708119.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:39.704Z,1516708119.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:40.079Z,1516708120.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:40.109Z,1516708120.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:40.482Z,1516708120.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:40.506Z,1516708120.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:40.874Z,1516708120.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:40.909Z,1516708120.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:41.267Z,1516708121.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:41.310Z,1516708121.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:41.669Z,1516708121.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:41.712Z,1516708121.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:42.073Z,1516708122.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:42.108Z,1516708122.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:42.480Z,1516708122.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:42.511Z,1516708122.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:42.880Z,1516708122.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:42.905Z,1516708122.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:43.283Z,1516708123.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:43.317Z,1516708123.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:43.673Z,1516708123.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:43.704Z,1516708123.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:44.070Z,1516708124.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:44.079Z,1516708124.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x55333 got:0x7618 2018-01-23T11:48:44.113Z,1516708124.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:44.475Z,1516708124.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:44.506Z,1516708124.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:44.866Z,1516708124.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:44.903Z,1516708124.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:45.266Z,1516708125.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:45.289Z,1516708125.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:45.678Z,1516708125.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:45.693Z,1516708125.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:46.084Z,1516708126.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:46.098Z,1516708126.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:49.176Z,1516708129.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:49.191Z,1516708129.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:49.297Z,1516708129.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:49.329Z,1516708129.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:49.665Z,1516708129.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:49.689Z,1516708129.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:50.060Z,1516708130.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:50.087Z,1516708130.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:50.474Z,1516708130.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:50.497Z,1516708130.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:50.878Z,1516708130.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:50.893Z,1516708130.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:51.273Z,1516708131.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:51.318Z,1516708131.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:51.653Z,1516708131.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:51.680Z,1516708131.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:52.052Z,1516708132.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:52.092Z,1516708132.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:52.474Z,1516708132.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:52.491Z,1516708132.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:52.874Z,1516708132.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:52.916Z,1516708132.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:53.271Z,1516708133.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:53.287Z,1516708133.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:53.653Z,1516708133.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:53.681Z,1516708133.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:54.052Z,1516708134.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:54.090Z,1516708134.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:54.475Z,1516708134.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:54.490Z,1516708134.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:54.875Z,1516708134.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:54.890Z,1516708134.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:55.268Z,1516708135.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:55.294Z,1516708135.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:55.653Z,1516708135.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:55.684Z,1516708135.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:56.069Z,1516708136.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:56.084Z,1516708136.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:56.472Z,1516708136.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:56.487Z,1516708136.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:56.882Z,1516708136.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:56.900Z,1516708136.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:57.274Z,1516708137.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:57.300Z,1516708137.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:57.658Z,1516708137.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:57.701Z,1516708137.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:58.053Z,1516708138.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:58.079Z,1516708138.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:58.472Z,1516708138.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:58.503Z,1516708138.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:58.877Z,1516708138.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:58.895Z,1516708138.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:59.268Z,1516708139.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:59.290Z,1516708139.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:48:59.653Z,1516708139.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:48:59.688Z,1516708139.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:00.056Z,1516708140.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:00.089Z,1516708140.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:00.472Z,1516708140.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:00.491Z,1516708140.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:00.876Z,1516708140.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:00.891Z,1516708140.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:01.271Z,1516708141.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:01.287Z,1516708141.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:01.659Z,1516708141.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:01.687Z,1516708141.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:02.052Z,1516708142.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:02.089Z,1516708142.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:02.471Z,1516708142.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:02.486Z,1516708142.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:02.873Z,1516708142.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:02.896Z,1516708142.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:03.263Z,1516708143.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:03.301Z,1516708143.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:03.654Z,1516708143.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:03.669Z,1516708143.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:04.051Z,1516708144.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:04.073Z,1516708144.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:04.467Z,1516708144.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:04.502Z,1516708144.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:04.875Z,1516708144.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:04.911Z,1516708144.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:05.275Z,1516708145.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:05.310Z,1516708145.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:05.661Z,1516708145.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:05.676Z,1516708145.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:06.058Z,1516708146.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:06.078Z,1516708146.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:06.471Z,1516708146.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:06.486Z,1516708146.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:06.871Z,1516708146.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:06.885Z,1516708146.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:07.270Z,1516708147.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:07.293Z,1516708147.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:07.661Z,1516708147.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:07.683Z,1516708147.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:08.061Z,1516708148.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:08.076Z,1516708148.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:08.474Z,1516708148.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:08.489Z,1516708148.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:08.874Z,1516708148.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:08.889Z,1516708148.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:09.272Z,1516708149.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:09.286Z,1516708149.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:09.658Z,1516708149.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:09.689Z,1516708149.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:10.056Z,1516708150.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:10.089Z,1516708150.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:10.473Z,1516708150.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:10.487Z,1516708150.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:10.875Z,1516708150.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:10.890Z,1516708150.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:11.268Z,1516708151.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:11.300Z,1516708151.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:11.653Z,1516708151.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:11.693Z,1516708151.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:12.052Z,1516708152.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:12.085Z,1516708152.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:12.468Z,1516708152.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:12.489Z,1516708152.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:12.876Z,1516708152.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:12.891Z,1516708152.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:13.268Z,1516708153.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:13.289Z,1516708153.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:13.655Z,1516708153.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:13.727Z,1516708153.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:14.057Z,1516708154.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:14.072Z,1516708154.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:14.471Z,1516708154.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:14.498Z,1516708154.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:14.871Z,1516708154.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:14.886Z,1516708154.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:15.275Z,1516708155.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:15.310Z,1516708155.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:15.662Z,1516708155.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:15.677Z,1516708155.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:16.058Z,1516708156.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:16.081Z,1516708156.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:16.470Z,1516708156.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:16.485Z,1516708156.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:16.870Z,1516708156.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:16.889Z,1516708156.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:17.271Z,1516708157.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:17.293Z,1516708157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:17.653Z,1516708157.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:17.681Z,1516708157.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:18.064Z,1516708158.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:18.082Z,1516708158.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:18.468Z,1516708158.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:18.495Z,1516708158.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:18.876Z,1516708158.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:18.890Z,1516708158.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:19.271Z,1516708159.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:19.286Z,1516708159.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:19.653Z,1516708159.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:19.685Z,1516708159.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:20.052Z,1516708160.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:20.090Z,1516708160.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:20.471Z,1516708160.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:20.486Z,1516708160.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:20.874Z,1516708160.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:20.901Z,1516708160.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:21.272Z,1516708161.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:21.287Z,1516708161.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:21.654Z,1516708161.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:21.685Z,1516708161.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:22.056Z,1516708162.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:22.088Z,1516708162.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:22.463Z,1516708162.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:22.498Z,1516708162.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:22.876Z,1516708162.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:22.891Z,1516708162.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:23.263Z,1516708163.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:23.296Z,1516708163.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:23.657Z,1516708163.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:23.691Z,1516708163.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:24.056Z,1516708164.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:24.089Z,1516708164.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:24.480Z,1516708164.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:24.495Z,1516708164.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:24.878Z,1516708164.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:24.893Z,1516708164.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:25.264Z,1516708165.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:25.301Z,1516708165.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:25.662Z,1516708165.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:25.693Z,1516708165.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:26.053Z,1516708166.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:26.097Z,1516708166.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:26.464Z,1516708166.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:26.501Z,1516708166.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:26.868Z,1516708166.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:26.905Z,1516708166.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:27.264Z,1516708167.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:27.292Z,1516708167.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:27.654Z,1516708167.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:27.669Z,1516708167.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:28.052Z,1516708168.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:28.073Z,1516708168.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:28.472Z,1516708168.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:28.501Z,1516708168.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:28.867Z,1516708168.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:28.899Z,1516708168.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:29.271Z,1516708169.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:29.305Z,1516708169.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:29.665Z,1516708169.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:29.680Z,1516708169.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:30.056Z,1516708170.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:30.075Z,1516708170.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:30.467Z,1516708170.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:30.482Z,1516708170.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:30.871Z,1516708170.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:30.886Z,1516708170.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:31.263Z,1516708171.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:31.278Z,1516708171.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:31.664Z,1516708171.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:31.709Z,1516708171.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:32.066Z,1516708172.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:32.080Z,1516708172.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:32.450Z,1516708172.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:32.482Z,1516708172.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:32.875Z,1516708172.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:32.890Z,1516708172.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:33.276Z,1516708173.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:33.290Z,1516708173.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:33.668Z,1516708173.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:33.695Z,1516708173.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:34.060Z,1516708174.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:34.086Z,1516708174.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:34.452Z,1516708174.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:34.486Z,1516708174.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:34.853Z,1516708174.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:34.885Z,1516708174.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:35.252Z,1516708175.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:35.288Z,1516708175.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:35.663Z,1516708175.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:35.698Z,1516708175.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:36.063Z,1516708176.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:36.097Z,1516708176.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:36.480Z,1516708176.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:36.494Z,1516708176.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:36.853Z,1516708176.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:36.890Z,1516708176.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:37.257Z,1516708177.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:37.288Z,1516708177.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:37.654Z,1516708177.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:37.669Z,1516708177.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:38.053Z,1516708178.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:38.068Z,1516708178.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:38.454Z,1516708178.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:38.470Z,1516708178.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:38.876Z,1516708178.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:38.901Z,1516708178.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:39.275Z,1516708179.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:39.301Z,1516708179.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:39.667Z,1516708179.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:39.703Z,1516708179.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:40.064Z,1516708180.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:40.081Z,1516708180.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:40.461Z,1516708180.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:40.476Z,1516708180.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:40.858Z,1516708180.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:40.877Z,1516708180.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:41.258Z,1516708181.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:41.277Z,1516708181.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:41.666Z,1516708181.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:41.681Z,1516708181.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:42.067Z,1516708182.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:42.082Z,1516708182.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:42.464Z,1516708182.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:42.478Z,1516708182.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:42.861Z,1516708182.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:42.876Z,1516708182.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:43.259Z,1516708183.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:43.274Z,1516708183.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:43.673Z,1516708183.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:43.701Z,1516708183.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:44.062Z,1516708184.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:44.077Z,1516708184.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:44.460Z,1516708184.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:44.475Z,1516708184.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:44.864Z,1516708184.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:44.879Z,1516708184.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:45.267Z,1516708185.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:45.288Z,1516708185.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:45.664Z,1516708185.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:45.679Z,1516708185.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:46.060Z,1516708186.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:46.075Z,1516708186.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:46.460Z,1516708186.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:46.486Z,1516708186.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:49.554Z,1516708189.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:49.570Z,1516708189.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:49.675Z,1516708189.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:49.720Z,1516708189.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:50.023Z,1516708190.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:50.038Z,1516708190.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:50.435Z,1516708190.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:50.470Z,1516708190.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:50.824Z,1516708190.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:50.839Z,1516708190.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:51.217Z,1516708191.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:51.244Z,1516708191.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:51.625Z,1516708191.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:51.640Z,1516708191.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:52.017Z,1516708192.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:52.044Z,1516708192.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:52.424Z,1516708192.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:52.445Z,1516708192.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:52.831Z,1516708192.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:52.846Z,1516708192.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:53.235Z,1516708193.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:53.250Z,1516708193.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:53.630Z,1516708193.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:53.646Z,1516708193.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:54.022Z,1516708194.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:54.045Z,1516708194.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:54.424Z,1516708194.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:54.445Z,1516708194.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:54.819Z,1516708194.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:54.839Z,1516708194.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:55.222Z,1516708195.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:55.244Z,1516708195.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:55.631Z,1516708195.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:55.646Z,1516708195.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:56.034Z,1516708196.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:56.053Z,1516708196.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:56.435Z,1516708196.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:56.450Z,1516708196.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:56.824Z,1516708196.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:56.845Z,1516708196.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:57.225Z,1516708197.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:57.240Z,1516708197.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:57.622Z,1516708197.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:57.645Z,1516708197.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:58.026Z,1516708198.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:58.049Z,1516708198.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:58.419Z,1516708198.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:58.440Z,1516708198.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:58.833Z,1516708198.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:58.848Z,1516708198.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:59.234Z,1516708199.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:59.249Z,1516708199.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:49:59.635Z,1516708199.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:49:59.650Z,1516708199.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:00.024Z,1516708200.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:00.038Z,1516708200.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:00.417Z,1516708200.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:00.440Z,1516708200.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:00.818Z,1516708200.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:00.849Z,1516708200.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:01.231Z,1516708201.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:01.246Z,1516708201.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:01.631Z,1516708201.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:01.667Z,1516708201.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:02.033Z,1516708202.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:02.048Z,1516708202.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:02.433Z,1516708202.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:02.452Z,1516708202.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:02.810Z,1516708202.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:02.842Z,1516708202.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:03.225Z,1516708203.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:03.240Z,1516708203.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:03.613Z,1516708203.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:03.650Z,1516708203.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:04.011Z,1516708204.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:04.038Z,1516708204.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:04.413Z,1516708204.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:04.438Z,1516708204.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:04.830Z,1516708204.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:04.845Z,1516708204.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:05.234Z,1516708205.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:05.249Z,1516708205.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:05.631Z,1516708205.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:05.647Z,1516708205.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:06.013Z,1516708206.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:06.047Z,1516708206.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:06.418Z,1516708206.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:06.445Z,1516708206.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:06.813Z,1516708206.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:06.841Z,1516708206.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:07.213Z,1516708207.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:07.246Z,1516708207.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:07.627Z,1516708207.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:07.687Z,1516708207.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:08.034Z,1516708208.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:08.049Z,1516708208.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:08.432Z,1516708208.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:08.452Z,1516708208.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:08.810Z,1516708208.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:08.834Z,1516708208.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:09.213Z,1516708209.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:09.249Z,1516708209.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:09.613Z,1516708209.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:09.650Z,1516708209.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:10.010Z,1516708210.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:10.025Z,1516708210.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:10.413Z,1516708210.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:10.449Z,1516708210.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:10.831Z,1516708210.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:10.859Z,1516708210.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:11.231Z,1516708211.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:11.258Z,1516708211.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:11.627Z,1516708211.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:11.654Z,1516708211.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:12.013Z,1516708212.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:12.032Z,1516708212.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:12.417Z,1516708212.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:12.432Z,1516708212.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:12.822Z,1516708212.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:12.857Z,1516708212.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:13.217Z,1516708213.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:13.232Z,1516708213.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:13.628Z,1516708213.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:13.671Z,1516708213.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:14.036Z,1516708214.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:14.065Z,1516708214.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:14.431Z,1516708214.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:14.466Z,1516708214.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:14.813Z,1516708214.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:14.833Z,1516708214.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:15.218Z,1516708215.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:15.237Z,1516708215.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:15.617Z,1516708215.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:15.632Z,1516708215.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:16.021Z,1516708216.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:16.041Z,1516708216.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:16.426Z,1516708216.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:16.441Z,1516708216.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:16.823Z,1516708216.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:16.838Z,1516708216.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:17.227Z,1516708217.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:17.242Z,1516708217.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:17.635Z,1516708217.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:17.650Z,1516708217.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:18.025Z,1516708218.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:18.039Z,1516708218.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:18.423Z,1516708218.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:18.438Z,1516708218.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:18.820Z,1516708218.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:18.839Z,1516708218.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:19.221Z,1516708219.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:19.236Z,1516708219.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:19.626Z,1516708219.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:19.641Z,1516708219.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:20.027Z,1516708220.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:20.042Z,1516708220.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:20.438Z,1516708220.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:20.453Z,1516708220.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:20.818Z,1516708220.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:20.833Z,1516708220.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:21.216Z,1516708221.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:21.249Z,1516708221.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:21.622Z,1516708221.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:21.636Z,1516708221.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:22.020Z,1516708222.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:22.040Z,1516708222.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:22.417Z,1516708222.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:22.440Z,1516708222.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:22.832Z,1516708222.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:22.847Z,1516708222.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:23.234Z,1516708223.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:23.249Z,1516708223.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:23.634Z,1516708223.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:23.649Z,1516708223.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:24.022Z,1516708224.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:24.037Z,1516708224.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:24.422Z,1516708224.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:24.437Z,1516708224.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:24.818Z,1516708224.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:24.849Z,1516708224.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:25.219Z,1516708225.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:25.250Z,1516708225.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:25.632Z,1516708225.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:25.653Z,1516708225.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:26.035Z,1516708226.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:26.050Z,1516708226.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:26.435Z,1516708226.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:26.450Z,1516708226.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:26.810Z,1516708226.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:26.846Z,1516708226.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:27.225Z,1516708227.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:27.241Z,1516708227.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:27.241Z,1516708227.241 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171 2018-01-23T11:50:27.241Z,1516708227.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:50:27.243Z,1516708227.243 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:27.243Z,1516708227.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 171 2018-01-23T11:50:27.243Z,1516708227.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:50:27.245Z,1516708227.245 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:27.245Z,1516708227.245 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171 2018-01-23T11:50:27.245Z,1516708227.245 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:50:27.257Z,1516708227.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:50:27.257Z,1516708227.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:50:27.257Z,1516708227.257 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:50:27.612Z,1516708227.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:27.652Z,1516708227.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:50:27.652Z,1516708227.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171 2018-01-23T11:50:27.653Z,1516708227.653 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:50:27.653Z,1516708227.653 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 171 2018-01-23T11:50:27.653Z,1516708227.653 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:50:27.653Z,1516708227.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171 2018-01-23T11:50:28.013Z,1516708228.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:28.044Z,1516708228.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:50:28.045Z,1516708228.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:50:28.045Z,1516708228.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:50:28.045Z,1516708228.045 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:50:28.046Z,1516708228.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:50:28.046Z,1516708228.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:50:28.047Z,1516708228.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:50:28.047Z,1516708228.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:50:28.047Z,1516708228.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:50:28.412Z,1516708228.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:28.449Z,1516708228.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:50:28.450Z,1516708228.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:28.827Z,1516708228.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:28.851Z,1516708228.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:50:28.852Z,1516708228.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:29.233Z,1516708229.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:29.253Z,1516708229.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:50:29.254Z,1516708229.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:29.627Z,1516708229.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:29.649Z,1516708229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:50:29.650Z,1516708229.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:30.012Z,1516708230.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:30.050Z,1516708230.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:50:30.051Z,1516708230.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:30.417Z,1516708230.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:30.442Z,1516708230.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:50:30.443Z,1516708230.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:30.814Z,1516708230.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:30.844Z,1516708230.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:50:30.845Z,1516708230.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:31.217Z,1516708231.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:31.250Z,1516708231.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:50:31.251Z,1516708231.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:31.624Z,1516708231.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:31.698Z,1516708231.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T11:50:31.699Z,1516708231.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:32.032Z,1516708232.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:32.046Z,1516708232.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:50:32.047Z,1516708232.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:32.430Z,1516708232.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:32.445Z,1516708232.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:50:32.446Z,1516708232.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:32.816Z,1516708232.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:32.836Z,1516708232.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:50:32.837Z,1516708232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:33.220Z,1516708233.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:33.235Z,1516708233.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:50:33.236Z,1516708233.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:33.621Z,1516708233.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:33.635Z,1516708233.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:50:33.636Z,1516708233.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:34.027Z,1516708234.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:34.041Z,1516708234.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:50:34.042Z,1516708234.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:34.417Z,1516708234.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:34.438Z,1516708234.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:50:34.439Z,1516708234.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:34.831Z,1516708234.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:34.845Z,1516708234.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:50:34.846Z,1516708234.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:35.231Z,1516708235.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:35.252Z,1516708235.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:50:35.253Z,1516708235.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:35.630Z,1516708235.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:35.645Z,1516708235.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:50:35.646Z,1516708235.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:36.022Z,1516708236.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:36.036Z,1516708236.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:50:36.037Z,1516708236.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:36.430Z,1516708236.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:36.444Z,1516708236.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:50:36.445Z,1516708236.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:36.820Z,1516708236.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:36.839Z,1516708236.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:50:36.840Z,1516708236.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:37.222Z,1516708237.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:37.237Z,1516708237.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:50:37.238Z,1516708237.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:37.627Z,1516708237.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:37.646Z,1516708237.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:50:37.651Z,1516708237.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:38.034Z,1516708238.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:38.049Z,1516708238.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:50:38.050Z,1516708238.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:38.432Z,1516708238.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:38.452Z,1516708238.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:50:38.453Z,1516708238.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:38.828Z,1516708238.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:38.842Z,1516708238.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:50:38.843Z,1516708238.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:39.228Z,1516708239.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:39.248Z,1516708239.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:50:39.249Z,1516708239.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:39.632Z,1516708239.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:39.647Z,1516708239.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:50:39.648Z,1516708239.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:40.031Z,1516708240.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:40.046Z,1516708240.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:50:40.047Z,1516708240.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:40.431Z,1516708240.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:40.446Z,1516708240.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:50:40.447Z,1516708240.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:40.822Z,1516708240.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:40.837Z,1516708240.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:50:40.838Z,1516708240.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:41.217Z,1516708241.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:41.238Z,1516708241.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:50:41.240Z,1516708241.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:41.631Z,1516708241.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:41.646Z,1516708241.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:50:41.648Z,1516708241.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:42.034Z,1516708242.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:42.049Z,1516708242.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:50:42.050Z,1516708242.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:42.431Z,1516708242.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:42.445Z,1516708242.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:50:42.446Z,1516708242.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:42.817Z,1516708242.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:42.839Z,1516708242.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:50:42.840Z,1516708242.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:43.221Z,1516708243.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:43.235Z,1516708243.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:50:43.236Z,1516708243.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:43.630Z,1516708243.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:43.645Z,1516708243.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:50:43.646Z,1516708243.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:44.034Z,1516708244.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:44.049Z,1516708244.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:50:44.050Z,1516708244.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:44.431Z,1516708244.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:44.445Z,1516708244.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:50:44.446Z,1516708244.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:44.820Z,1516708244.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:44.839Z,1516708244.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:50:44.840Z,1516708244.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:45.215Z,1516708245.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:45.238Z,1516708245.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:50:45.239Z,1516708245.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:45.632Z,1516708245.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:45.646Z,1516708245.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:50:45.647Z,1516708245.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:46.030Z,1516708246.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:46.045Z,1516708246.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:50:46.046Z,1516708246.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:46.430Z,1516708246.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:46.445Z,1516708246.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:50:46.446Z,1516708246.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:46.823Z,1516708246.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:46.837Z,1516708246.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:50:46.838Z,1516708246.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:49.917Z,1516708249.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:49.937Z,1516708249.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:50.051Z,1516708250.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:50.077Z,1516708250.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:50.408Z,1516708250.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:50.437Z,1516708250.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:50.804Z,1516708250.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:50.830Z,1516708250.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:51.188Z,1516708251.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:51.209Z,1516708251.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:51.587Z,1516708251.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:51.603Z,1516708251.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:51.985Z,1516708251.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:52.016Z,1516708252.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:52.392Z,1516708252.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:52.408Z,1516708252.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:52.794Z,1516708252.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:52.809Z,1516708252.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:53.194Z,1516708253.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:53.217Z,1516708253.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:53.593Z,1516708253.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:53.609Z,1516708253.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:53.985Z,1516708253.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:54.012Z,1516708254.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:54.389Z,1516708254.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:54.404Z,1516708254.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:54.784Z,1516708254.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:54.804Z,1516708254.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:55.185Z,1516708255.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:55.216Z,1516708255.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:55.594Z,1516708255.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:55.608Z,1516708255.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:55.995Z,1516708255.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:56.018Z,1516708256.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:56.407Z,1516708256.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:56.422Z,1516708256.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:56.797Z,1516708256.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:56.824Z,1516708256.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:57.181Z,1516708257.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:57.209Z,1516708257.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:57.581Z,1516708257.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:57.617Z,1516708257.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:57.982Z,1516708257.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:58.017Z,1516708258.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:58.381Z,1516708258.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:58.396Z,1516708258.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:58.791Z,1516708258.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:58.825Z,1516708258.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:59.203Z,1516708259.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:59.231Z,1516708259.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:59.592Z,1516708259.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:50:59.616Z,1516708259.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:50:59.993Z,1516708259.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:00.009Z,1516708260.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:00.386Z,1516708260.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:00.401Z,1516708260.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:00.782Z,1516708260.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:00.810Z,1516708260.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:01.190Z,1516708261.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:01.206Z,1516708261.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:01.588Z,1516708261.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:01.603Z,1516708261.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:01.992Z,1516708261.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:02.008Z,1516708262.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:02.408Z,1516708262.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:02.430Z,1516708262.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:02.791Z,1516708262.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:02.813Z,1516708262.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:03.189Z,1516708263.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:03.205Z,1516708263.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:03.586Z,1516708263.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:03.605Z,1516708263.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:03.989Z,1516708263.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:04.009Z,1516708264.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:04.384Z,1516708264.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:04.405Z,1516708264.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:04.798Z,1516708264.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:04.814Z,1516708264.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:05.202Z,1516708265.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:05.217Z,1516708265.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:05.598Z,1516708265.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:05.614Z,1516708265.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:05.984Z,1516708265.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:06.006Z,1516708266.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:06.384Z,1516708266.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:06.411Z,1516708266.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:06.778Z,1516708266.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:06.814Z,1516708266.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:07.185Z,1516708267.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:07.212Z,1516708267.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:07.580Z,1516708267.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:07.617Z,1516708267.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:07.996Z,1516708267.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:08.026Z,1516708268.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:08.403Z,1516708268.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:08.425Z,1516708268.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:08.804Z,1516708268.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:08.819Z,1516708268.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:09.180Z,1516708269.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:09.206Z,1516708269.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:09.584Z,1516708269.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:09.617Z,1516708269.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:09.981Z,1516708269.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:10.024Z,1516708270.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:10.384Z,1516708270.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:10.412Z,1516708270.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:10.800Z,1516708270.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:10.815Z,1516708270.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:11.204Z,1516708271.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:11.224Z,1516708271.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:11.600Z,1516708271.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:11.615Z,1516708271.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:11.996Z,1516708271.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:12.015Z,1516708272.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:12.381Z,1516708272.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:12.420Z,1516708272.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:12.779Z,1516708272.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:12.818Z,1516708272.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:13.182Z,1516708273.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:13.217Z,1516708273.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:13.581Z,1516708273.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:13.621Z,1516708273.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:13.996Z,1516708273.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:14.023Z,1516708274.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:14.404Z,1516708274.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:14.419Z,1516708274.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:14.800Z,1516708274.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:14.826Z,1516708274.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:15.180Z,1516708275.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:15.231Z,1516708275.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:15.584Z,1516708275.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:15.611Z,1516708275.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:15.981Z,1516708275.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:16.014Z,1516708276.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:16.380Z,1516708276.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:16.417Z,1516708276.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:16.795Z,1516708276.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:16.818Z,1516708276.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:17.204Z,1516708277.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:17.218Z,1516708277.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:17.596Z,1516708277.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:17.618Z,1516708277.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:17.980Z,1516708277.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:18.017Z,1516708278.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:18.380Z,1516708278.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:18.418Z,1516708278.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:18.778Z,1516708278.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:18.802Z,1516708278.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:19.181Z,1516708279.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:19.212Z,1516708279.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:19.580Z,1516708279.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:19.626Z,1516708279.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:19.991Z,1516708279.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:20.017Z,1516708280.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:20.395Z,1516708280.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:20.429Z,1516708280.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:20.791Z,1516708280.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:20.818Z,1516708280.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:21.180Z,1516708281.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:21.221Z,1516708281.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:21.580Z,1516708281.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:21.601Z,1516708281.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:21.989Z,1516708281.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:22.004Z,1516708282.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:22.388Z,1516708282.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:22.425Z,1516708282.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:22.799Z,1516708282.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:22.832Z,1516708282.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:23.207Z,1516708283.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:23.233Z,1516708283.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:23.595Z,1516708283.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:23.610Z,1516708283.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:23.986Z,1516708283.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:24.008Z,1516708284.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:24.390Z,1516708284.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:24.404Z,1516708284.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:24.784Z,1516708284.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:24.803Z,1516708284.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:25.186Z,1516708285.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:25.214Z,1516708285.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:25.589Z,1516708285.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:25.604Z,1516708285.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:25.991Z,1516708285.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:26.007Z,1516708286.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:26.399Z,1516708286.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:26.414Z,1516708286.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:26.791Z,1516708286.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:26.812Z,1516708286.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:27.185Z,1516708287.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:27.204Z,1516708287.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:27.590Z,1516708287.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:27.605Z,1516708287.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:27.990Z,1516708287.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:28.005Z,1516708288.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:28.386Z,1516708288.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:28.406Z,1516708288.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:28.795Z,1516708288.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:28.811Z,1516708288.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:29.195Z,1516708289.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:29.210Z,1516708289.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:29.594Z,1516708289.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:29.609Z,1516708289.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:29.989Z,1516708289.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:30.004Z,1516708290.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:30.389Z,1516708290.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:30.404Z,1516708290.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:30.784Z,1516708290.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:30.805Z,1516708290.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:31.188Z,1516708291.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:31.207Z,1516708291.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:31.593Z,1516708291.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:31.609Z,1516708291.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:31.994Z,1516708291.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:32.013Z,1516708292.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:32.395Z,1516708292.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:32.410Z,1516708292.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:32.794Z,1516708292.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:32.817Z,1516708292.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:33.187Z,1516708293.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:33.202Z,1516708293.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:33.588Z,1516708293.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:33.603Z,1516708293.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:33.984Z,1516708293.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:34.016Z,1516708294.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:34.388Z,1516708294.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:34.402Z,1516708294.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:34.811Z,1516708294.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:34.844Z,1516708294.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:35.195Z,1516708295.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:35.216Z,1516708295.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:35.594Z,1516708295.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:35.609Z,1516708295.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:35.987Z,1516708295.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:36.009Z,1516708296.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:36.396Z,1516708296.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:36.411Z,1516708296.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:36.785Z,1516708296.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:36.805Z,1516708296.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:37.189Z,1516708297.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:37.208Z,1516708297.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:37.591Z,1516708297.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:37.606Z,1516708297.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:37.996Z,1516708297.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:38.011Z,1516708298.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:38.407Z,1516708298.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:38.422Z,1516708298.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:38.800Z,1516708298.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:38.815Z,1516708298.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:39.184Z,1516708299.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:39.213Z,1516708299.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:39.597Z,1516708299.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:39.617Z,1516708299.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:39.999Z,1516708299.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:40.015Z,1516708300.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:40.384Z,1516708300.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:40.407Z,1516708300.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:40.798Z,1516708300.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:40.814Z,1516708300.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:41.203Z,1516708301.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:41.225Z,1516708301.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:41.598Z,1516708301.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:41.615Z,1516708301.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:41.984Z,1516708301.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:42.006Z,1516708302.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:42.388Z,1516708302.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:42.415Z,1516708302.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:42.791Z,1516708302.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:42.809Z,1516708302.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:43.201Z,1516708303.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:43.216Z,1516708303.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:43.581Z,1516708303.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:43.618Z,1516708303.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:43.999Z,1516708303.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:44.014Z,1516708304.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:44.402Z,1516708304.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:44.417Z,1516708304.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:44.807Z,1516708304.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:44.829Z,1516708304.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:45.196Z,1516708305.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:45.214Z,1516708305.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:45.596Z,1516708305.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:45.614Z,1516708305.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:45.984Z,1516708305.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:46.022Z,1516708306.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:46.397Z,1516708306.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:46.417Z,1516708306.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:46.810Z,1516708306.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:46.829Z,1516708306.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:47.204Z,1516708307.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:47.220Z,1516708307.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:50.292Z,1516708310.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:50.313Z,1516708310.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:50.414Z,1516708310.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:50.438Z,1516708310.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:50.773Z,1516708310.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:50.814Z,1516708310.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:51.173Z,1516708311.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:51.181Z,1516708311.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x48008 got:0x49716 2018-01-23T11:51:51.201Z,1516708311.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:51.554Z,1516708311.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:51.596Z,1516708311.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:51.972Z,1516708311.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:51.999Z,1516708311.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:52.391Z,1516708312.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:52.406Z,1516708312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:52.776Z,1516708312.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:52.800Z,1516708312.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:53.166Z,1516708313.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:53.193Z,1516708313.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:53.559Z,1516708313.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:53.589Z,1516708313.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:53.961Z,1516708313.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:54.005Z,1516708314.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:54.360Z,1516708314.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:54.390Z,1516708314.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:54.787Z,1516708314.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:54.801Z,1516708314.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:55.181Z,1516708315.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:55.201Z,1516708315.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:55.575Z,1516708315.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:55.594Z,1516708315.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:55.957Z,1516708315.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:55.992Z,1516708315.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:56.361Z,1516708316.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:56.393Z,1516708316.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:56.758Z,1516708316.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:56.794Z,1516708316.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:57.157Z,1516708317.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:57.192Z,1516708317.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:57.554Z,1516708317.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:57.579Z,1516708317.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:57.940Z,1516708317.940 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T11:51:57.940Z,1516708317.940 [NAL9602] Data Fault, FailCount= 2 2018-01-23T11:51:57.940Z,1516708317.940 [NAL9602](ERROR): Data Fault 2018-01-23T11:51:57.957Z,1516708317.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:57.990Z,1516708317.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:58.020Z,1516708318.020 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T11:51:58.340Z,1516708318.340 [NAL9602](INFO): Powering down 2018-01-23T11:51:58.358Z,1516708318.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:58.403Z,1516708318.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:58.754Z,1516708318.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:58.802Z,1516708318.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:59.156Z,1516708319.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:59.201Z,1516708319.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:59.221Z,1516708319.221 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T11:51:59.221Z,1516708319.221 [NAL9602] No Fault, FailCount= 2 2018-01-23T11:51:59.556Z,1516708319.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:59.573Z,1516708319.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:51:59.956Z,1516708319.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:51:59.975Z,1516708319.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:00.360Z,1516708320.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:00.375Z,1516708320.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:00.768Z,1516708320.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:00.785Z,1516708320.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:01.160Z,1516708321.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:01.178Z,1516708321.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:01.564Z,1516708321.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:01.581Z,1516708321.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:01.960Z,1516708321.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:01.985Z,1516708321.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:02.361Z,1516708322.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:02.381Z,1516708322.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:02.763Z,1516708322.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:02.781Z,1516708322.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:03.163Z,1516708323.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:03.181Z,1516708323.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:03.560Z,1516708323.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:03.583Z,1516708323.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:03.964Z,1516708323.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:03.994Z,1516708323.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:04.364Z,1516708324.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:04.382Z,1516708324.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:04.764Z,1516708324.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:04.787Z,1516708324.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:05.164Z,1516708325.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:05.196Z,1516708325.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:05.566Z,1516708325.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:05.581Z,1516708325.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:05.954Z,1516708325.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:05.991Z,1516708325.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:06.357Z,1516708326.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:06.387Z,1516708326.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:06.769Z,1516708326.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:06.784Z,1516708326.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:07.169Z,1516708327.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:07.184Z,1516708327.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:07.556Z,1516708327.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:07.594Z,1516708327.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:07.956Z,1516708327.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:07.987Z,1516708327.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:08.368Z,1516708328.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:08.384Z,1516708328.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:08.756Z,1516708328.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:08.791Z,1516708328.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:09.169Z,1516708329.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:09.185Z,1516708329.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:09.554Z,1516708329.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:09.589Z,1516708329.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:09.956Z,1516708329.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:09.981Z,1516708329.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:10.356Z,1516708330.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:10.383Z,1516708330.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:10.754Z,1516708330.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:10.781Z,1516708330.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:11.156Z,1516708331.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:11.192Z,1516708331.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:11.556Z,1516708331.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:11.589Z,1516708331.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:11.954Z,1516708331.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:11.977Z,1516708331.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:12.356Z,1516708332.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:12.395Z,1516708332.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:12.760Z,1516708332.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:12.797Z,1516708332.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:13.156Z,1516708333.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:13.184Z,1516708333.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:13.556Z,1516708333.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:13.571Z,1516708333.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:13.964Z,1516708333.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:14.005Z,1516708334.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:14.361Z,1516708334.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:14.376Z,1516708334.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:14.761Z,1516708334.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:14.776Z,1516708334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:15.165Z,1516708335.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:15.181Z,1516708335.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:15.560Z,1516708335.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:15.576Z,1516708335.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:15.962Z,1516708335.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:16.002Z,1516708336.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:16.366Z,1516708336.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:16.382Z,1516708336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:16.763Z,1516708336.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:16.779Z,1516708336.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:17.163Z,1516708337.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:17.178Z,1516708337.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:17.562Z,1516708337.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:17.591Z,1516708337.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:17.964Z,1516708337.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:17.980Z,1516708337.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:18.364Z,1516708338.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:18.378Z,1516708338.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:18.761Z,1516708338.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:18.780Z,1516708338.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:19.164Z,1516708339.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:19.179Z,1516708339.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:19.564Z,1516708339.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:19.578Z,1516708339.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:19.962Z,1516708339.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:19.985Z,1516708339.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:20.364Z,1516708340.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:20.379Z,1516708340.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:20.764Z,1516708340.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:20.793Z,1516708340.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:21.168Z,1516708341.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:21.184Z,1516708341.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:21.564Z,1516708341.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:21.579Z,1516708341.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:21.963Z,1516708341.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:21.978Z,1516708341.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:22.364Z,1516708342.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:22.379Z,1516708342.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:22.764Z,1516708342.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:22.779Z,1516708342.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:23.164Z,1516708343.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:23.178Z,1516708343.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:23.564Z,1516708343.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:23.591Z,1516708343.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:23.968Z,1516708343.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:23.983Z,1516708343.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:24.365Z,1516708344.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:24.381Z,1516708344.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:24.765Z,1516708344.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:24.785Z,1516708344.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:25.165Z,1516708345.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:25.180Z,1516708345.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:25.565Z,1516708345.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:25.584Z,1516708345.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:25.954Z,1516708345.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:25.986Z,1516708345.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:26.357Z,1516708346.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:26.408Z,1516708346.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:26.757Z,1516708346.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:26.784Z,1516708346.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:27.157Z,1516708347.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:27.185Z,1516708347.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:27.557Z,1516708347.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:27.593Z,1516708347.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:27.961Z,1516708347.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:27.988Z,1516708347.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:28.356Z,1516708348.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:28.388Z,1516708348.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:28.740Z,1516708348.740 [NAL9602](INFO): Powering up NAL9602 2018-01-23T11:52:28.757Z,1516708348.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:28.785Z,1516708348.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:29.156Z,1516708349.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:29.172Z,1516708349.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:29.553Z,1516708349.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:29.568Z,1516708349.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:29.960Z,1516708349.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:29.976Z,1516708349.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:30.364Z,1516708350.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:30.385Z,1516708350.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:30.760Z,1516708350.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:30.775Z,1516708350.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:31.161Z,1516708351.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:31.180Z,1516708351.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:31.561Z,1516708351.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:31.585Z,1516708351.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:31.960Z,1516708351.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:31.987Z,1516708351.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:32.368Z,1516708352.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:32.383Z,1516708352.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:32.765Z,1516708352.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:32.784Z,1516708352.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:33.168Z,1516708353.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:33.183Z,1516708353.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:33.564Z,1516708353.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:33.585Z,1516708353.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:33.964Z,1516708353.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:33.981Z,1516708353.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:34.364Z,1516708354.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:34.379Z,1516708354.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:34.764Z,1516708354.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:34.779Z,1516708354.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:35.165Z,1516708355.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:35.184Z,1516708355.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:35.553Z,1516708355.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:35.588Z,1516708355.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:35.964Z,1516708355.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:35.979Z,1516708355.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:36.364Z,1516708356.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:36.385Z,1516708356.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:36.753Z,1516708356.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:36.788Z,1516708356.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:37.165Z,1516708357.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:37.181Z,1516708357.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:37.564Z,1516708357.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:37.584Z,1516708357.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:37.964Z,1516708357.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:37.979Z,1516708357.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:38.364Z,1516708358.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:38.379Z,1516708358.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:38.764Z,1516708358.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:38.784Z,1516708358.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:39.168Z,1516708359.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:39.183Z,1516708359.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:39.578Z,1516708359.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:39.594Z,1516708359.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:39.940Z,1516708359.940 [NAL9602](INFO): NAL9602 initialized 2018-01-23T11:52:39.965Z,1516708359.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:39.987Z,1516708359.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:40.364Z,1516708360.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:40.379Z,1516708360.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:40.776Z,1516708360.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:40.791Z,1516708360.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:41.179Z,1516708361.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:41.194Z,1516708361.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:41.575Z,1516708361.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:41.596Z,1516708361.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:41.969Z,1516708361.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:41.985Z,1516708361.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:42.361Z,1516708362.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:42.383Z,1516708362.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:42.765Z,1516708362.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:42.784Z,1516708362.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:43.166Z,1516708363.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:43.182Z,1516708363.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:43.579Z,1516708363.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:43.594Z,1516708363.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:43.978Z,1516708363.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:43.993Z,1516708363.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:44.376Z,1516708364.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:44.391Z,1516708364.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:44.761Z,1516708364.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:44.784Z,1516708364.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:45.160Z,1516708365.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:45.192Z,1516708365.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:45.570Z,1516708365.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:45.585Z,1516708365.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:45.959Z,1516708365.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:45.993Z,1516708365.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:45.996Z,1516708365.996 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T11:52:45.996Z,1516708365.996 [Default:CheckIn:C.Wait] Stopped 2018-01-23T11:52:45.996Z,1516708365.996 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T11:52:45.996Z,1516708365.996 [Default:CheckIn:D] Running Loop=1 2018-01-23T11:52:46.364Z,1516708366.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:46.379Z,1516708366.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:46.382Z,1516708366.382 [Default:CheckIn:D] Stopped 2018-01-23T11:52:46.382Z,1516708366.382 [Default:CheckIn:E] Running Loop=1 2018-01-23T11:52:46.776Z,1516708366.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:46.791Z,1516708366.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:46.794Z,1516708366.794 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 514.905371 min 2018-01-23T11:52:46.795Z,1516708366.795 [Default:CheckIn:E] Stopped 2018-01-23T11:52:46.795Z,1516708366.795 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T11:52:46.795Z,1516708366.795 [Default:CheckIn] Stopped 2018-01-23T11:52:46.795Z,1516708366.795 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T11:52:46.795Z,1516708366.795 [Default:CheckIn](INFO): Running loop #51 2018-01-23T11:52:46.796Z,1516708366.796 [Default:CheckIn] Running Loop=51 2018-01-23T11:52:46.796Z,1516708366.796 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T11:52:46.796Z,1516708366.796 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T11:52:47.178Z,1516708367.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:47.194Z,1516708367.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:47.575Z,1516708367.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:47.590Z,1516708367.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:50.676Z,1516708370.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:50.691Z,1516708370.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:50.797Z,1516708370.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:50.833Z,1516708370.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:51.156Z,1516708371.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:51.180Z,1516708371.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:51.560Z,1516708371.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:51.597Z,1516708371.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:51.948Z,1516708371.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:51.963Z,1516708371.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:52.338Z,1516708372.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:52.360Z,1516708372.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:52.738Z,1516708372.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:52.765Z,1516708372.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:53.136Z,1516708373.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:53.164Z,1516708373.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:53.551Z,1516708373.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:53.566Z,1516708373.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:53.951Z,1516708373.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:53.967Z,1516708373.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:54.350Z,1516708374.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:54.366Z,1516708374.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:54.740Z,1516708374.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:54.761Z,1516708374.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:55.141Z,1516708375.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:55.157Z,1516708375.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:55.540Z,1516708375.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:55.559Z,1516708375.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:55.940Z,1516708375.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:55.959Z,1516708375.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:56.336Z,1516708376.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:56.363Z,1516708376.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:56.751Z,1516708376.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:56.766Z,1516708376.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:57.154Z,1516708377.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:57.169Z,1516708377.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:57.552Z,1516708377.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:57.567Z,1516708377.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:57.936Z,1516708377.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:57.959Z,1516708377.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:58.335Z,1516708378.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:58.368Z,1516708378.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:58.740Z,1516708378.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:58.762Z,1516708378.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:59.135Z,1516708379.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:59.159Z,1516708379.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:59.551Z,1516708379.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:59.566Z,1516708379.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:52:59.956Z,1516708379.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:52:59.971Z,1516708379.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:00.351Z,1516708380.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:00.366Z,1516708380.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:00.736Z,1516708380.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:00.760Z,1516708380.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:01.137Z,1516708381.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:01.174Z,1516708381.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:01.544Z,1516708381.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:01.565Z,1516708381.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:01.942Z,1516708381.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:01.958Z,1516708381.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:02.336Z,1516708382.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:02.369Z,1516708382.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:02.756Z,1516708382.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:02.771Z,1516708382.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:03.156Z,1516708383.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:03.171Z,1516708383.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:03.553Z,1516708383.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:03.573Z,1516708383.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:03.945Z,1516708383.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:03.961Z,1516708383.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:04.333Z,1516708384.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:04.370Z,1516708384.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:04.733Z,1516708384.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:04.769Z,1516708384.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:05.133Z,1516708385.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:05.165Z,1516708385.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:05.554Z,1516708385.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:05.569Z,1516708385.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:05.957Z,1516708385.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:05.972Z,1516708385.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:06.350Z,1516708386.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:06.370Z,1516708386.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:06.732Z,1516708386.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:06.760Z,1516708386.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:07.132Z,1516708387.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:07.169Z,1516708387.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:07.536Z,1516708387.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:07.562Z,1516708387.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:07.937Z,1516708387.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:07.969Z,1516708387.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:08.332Z,1516708388.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:08.370Z,1516708388.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:08.747Z,1516708388.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:08.769Z,1516708388.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:09.153Z,1516708389.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:09.173Z,1516708389.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:09.542Z,1516708389.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:09.577Z,1516708389.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:09.936Z,1516708389.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:09.963Z,1516708389.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:10.332Z,1516708390.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:10.365Z,1516708390.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:10.733Z,1516708390.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:10.770Z,1516708390.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:11.137Z,1516708391.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:11.163Z,1516708391.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:11.551Z,1516708391.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:11.566Z,1516708391.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:11.955Z,1516708391.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:11.976Z,1516708391.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:12.348Z,1516708392.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:12.370Z,1516708392.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:12.732Z,1516708392.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:12.765Z,1516708392.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:13.136Z,1516708393.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:13.170Z,1516708393.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:13.536Z,1516708393.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:13.569Z,1516708393.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:13.933Z,1516708393.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:13.964Z,1516708393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:14.336Z,1516708394.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:14.377Z,1516708394.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:14.743Z,1516708394.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:14.770Z,1516708394.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:15.147Z,1516708395.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:15.180Z,1516708395.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:15.543Z,1516708395.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:15.571Z,1516708395.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:15.932Z,1516708395.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:15.969Z,1516708395.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:16.336Z,1516708396.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:16.377Z,1516708396.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:16.741Z,1516708396.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:16.756Z,1516708396.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:17.140Z,1516708397.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:17.177Z,1516708397.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:17.551Z,1516708397.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:17.587Z,1516708397.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:17.951Z,1516708397.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:17.966Z,1516708397.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:18.344Z,1516708398.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:18.358Z,1516708398.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:18.740Z,1516708398.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:18.755Z,1516708398.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:19.140Z,1516708399.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:19.170Z,1516708399.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:19.541Z,1516708399.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:19.557Z,1516708399.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:19.938Z,1516708399.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:19.964Z,1516708399.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:20.342Z,1516708400.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:20.356Z,1516708400.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:20.748Z,1516708400.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:20.763Z,1516708400.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:21.147Z,1516708401.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:21.163Z,1516708401.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:21.544Z,1516708401.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:21.561Z,1516708401.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:21.942Z,1516708401.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:21.957Z,1516708401.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:22.341Z,1516708402.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:22.357Z,1516708402.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:22.741Z,1516708402.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:22.756Z,1516708402.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:23.140Z,1516708403.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:23.155Z,1516708403.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:23.543Z,1516708403.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:23.565Z,1516708403.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:23.951Z,1516708403.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:23.966Z,1516708403.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:24.348Z,1516708404.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:24.363Z,1516708404.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:24.740Z,1516708404.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:24.755Z,1516708404.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:25.141Z,1516708405.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:25.156Z,1516708405.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:25.540Z,1516708405.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:25.556Z,1516708405.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:25.940Z,1516708405.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:25.958Z,1516708405.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:26.342Z,1516708406.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:26.356Z,1516708406.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:26.748Z,1516708406.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:26.763Z,1516708406.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:27.147Z,1516708407.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:27.162Z,1516708407.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:27.547Z,1516708407.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:27.562Z,1516708407.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:27.941Z,1516708407.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:27.956Z,1516708407.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:28.339Z,1516708408.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:28.358Z,1516708408.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:28.358Z,1516708408.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172 2018-01-23T11:53:28.358Z,1516708408.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:53:28.360Z,1516708408.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:28.360Z,1516708408.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 172 2018-01-23T11:53:28.361Z,1516708408.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:53:28.362Z,1516708408.362 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:28.362Z,1516708408.362 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172 2018-01-23T11:53:28.362Z,1516708408.362 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:53:28.395Z,1516708408.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:53:28.395Z,1516708408.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:53:28.395Z,1516708408.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:53:28.742Z,1516708408.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:28.767Z,1516708408.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:53:28.767Z,1516708408.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172 2018-01-23T11:53:28.768Z,1516708408.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:53:28.768Z,1516708408.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 172 2018-01-23T11:53:28.768Z,1516708408.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:53:28.768Z,1516708408.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172 2018-01-23T11:53:29.149Z,1516708409.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:29.163Z,1516708409.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:53:29.163Z,1516708409.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:53:29.164Z,1516708409.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:53:29.164Z,1516708409.164 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:53:29.165Z,1516708409.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:53:29.165Z,1516708409.165 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:53:29.165Z,1516708409.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:53:29.166Z,1516708409.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:53:29.166Z,1516708409.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:53:29.554Z,1516708409.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:29.569Z,1516708409.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:53:29.570Z,1516708409.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:29.955Z,1516708409.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:29.969Z,1516708409.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:53:29.970Z,1516708409.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:30.350Z,1516708410.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:30.366Z,1516708410.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:53:30.367Z,1516708410.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:30.735Z,1516708410.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:30.766Z,1516708410.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:53:30.767Z,1516708410.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:31.146Z,1516708411.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:31.161Z,1516708411.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:53:31.162Z,1516708411.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:31.539Z,1516708411.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:31.570Z,1516708411.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:53:31.571Z,1516708411.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:31.939Z,1516708411.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:31.960Z,1516708411.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:53:31.961Z,1516708411.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:32.341Z,1516708412.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:32.357Z,1516708412.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:53:32.358Z,1516708412.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:32.754Z,1516708412.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:32.770Z,1516708412.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:53:32.771Z,1516708412.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:33.154Z,1516708413.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:33.169Z,1516708413.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:53:33.170Z,1516708413.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:33.552Z,1516708413.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:33.567Z,1516708413.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:53:33.568Z,1516708413.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:33.939Z,1516708413.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:33.958Z,1516708413.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:53:33.959Z,1516708413.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:34.335Z,1516708414.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:34.367Z,1516708414.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:53:34.368Z,1516708414.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:34.742Z,1516708414.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:34.756Z,1516708414.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:53:34.757Z,1516708414.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:35.136Z,1516708415.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:35.158Z,1516708415.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:53:35.159Z,1516708415.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:35.550Z,1516708415.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:35.565Z,1516708415.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:53:35.566Z,1516708415.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:35.954Z,1516708415.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:35.976Z,1516708415.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:53:35.977Z,1516708415.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:36.355Z,1516708416.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:36.369Z,1516708416.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:53:36.370Z,1516708416.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:36.732Z,1516708416.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:36.758Z,1516708416.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:53:36.759Z,1516708416.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:37.132Z,1516708417.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:37.168Z,1516708417.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:53:37.169Z,1516708417.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:37.543Z,1516708417.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:37.562Z,1516708417.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:53:37.563Z,1516708417.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:37.933Z,1516708417.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:37.968Z,1516708417.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:53:37.969Z,1516708417.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:38.331Z,1516708418.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:38.368Z,1516708418.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:53:38.369Z,1516708418.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:38.752Z,1516708418.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:38.767Z,1516708418.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:53:38.768Z,1516708418.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:39.156Z,1516708419.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:39.170Z,1516708419.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:53:39.171Z,1516708419.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:39.550Z,1516708419.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:39.580Z,1516708419.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:53:39.581Z,1516708419.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:39.933Z,1516708419.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:39.969Z,1516708419.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:53:39.970Z,1516708419.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:40.333Z,1516708420.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:40.359Z,1516708420.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:53:40.360Z,1516708420.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:40.734Z,1516708420.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:40.768Z,1516708420.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:53:40.769Z,1516708420.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:41.131Z,1516708421.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:41.166Z,1516708421.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:53:41.167Z,1516708421.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:41.551Z,1516708421.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:41.568Z,1516708421.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:53:41.569Z,1516708421.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:41.958Z,1516708421.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:41.972Z,1516708421.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:53:41.973Z,1516708421.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:42.352Z,1516708422.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:42.367Z,1516708422.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:53:42.368Z,1516708422.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:42.732Z,1516708422.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:42.769Z,1516708422.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:53:42.770Z,1516708422.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:43.132Z,1516708423.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:43.160Z,1516708423.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:53:43.161Z,1516708423.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:43.532Z,1516708423.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:43.565Z,1516708423.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:53:43.566Z,1516708423.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:43.933Z,1516708423.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:43.966Z,1516708423.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:53:43.967Z,1516708423.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:44.331Z,1516708424.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:44.368Z,1516708424.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:53:44.369Z,1516708424.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:44.748Z,1516708424.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:44.779Z,1516708424.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:53:44.780Z,1516708424.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:45.155Z,1516708425.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:45.170Z,1516708425.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:53:45.171Z,1516708425.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:45.546Z,1516708425.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:45.581Z,1516708425.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:53:45.582Z,1516708425.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:45.932Z,1516708425.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:45.965Z,1516708425.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:53:45.966Z,1516708425.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:46.332Z,1516708426.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:46.368Z,1516708426.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:53:46.369Z,1516708426.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:46.733Z,1516708426.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:46.769Z,1516708426.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:53:46.770Z,1516708426.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:47.130Z,1516708427.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:47.145Z,1516708427.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:53:47.146Z,1516708427.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:47.559Z,1516708427.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:47.580Z,1516708427.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:53:47.581Z,1516708427.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:47.961Z,1516708427.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:47.975Z,1516708427.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:53:47.976Z,1516708427.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:51.072Z,1516708431.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:51.092Z,1516708431.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:51.190Z,1516708431.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:51.225Z,1516708431.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:51.561Z,1516708431.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:51.584Z,1516708431.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:51.968Z,1516708431.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:51.995Z,1516708431.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:52.371Z,1516708432.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:52.386Z,1516708432.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:52.775Z,1516708432.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:52.790Z,1516708432.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:53.175Z,1516708433.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:53.190Z,1516708433.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:53.574Z,1516708433.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:53.589Z,1516708433.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:53.965Z,1516708433.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:53.980Z,1516708433.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:54.364Z,1516708434.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:54.385Z,1516708434.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:54.765Z,1516708434.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:54.785Z,1516708434.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:55.165Z,1516708435.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:55.184Z,1516708435.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:55.575Z,1516708435.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:55.590Z,1516708435.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:55.973Z,1516708435.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:55.989Z,1516708435.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:56.374Z,1516708436.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:56.422Z,1516708436.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:56.761Z,1516708436.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:56.784Z,1516708436.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:57.168Z,1516708437.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:57.183Z,1516708437.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:57.565Z,1516708437.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:57.584Z,1516708437.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:57.964Z,1516708437.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:57.985Z,1516708437.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:58.364Z,1516708438.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:58.379Z,1516708438.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:58.776Z,1516708438.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:58.790Z,1516708438.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:59.174Z,1516708439.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:59.190Z,1516708439.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:59.576Z,1516708439.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:59.591Z,1516708439.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:53:59.963Z,1516708439.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:53:59.991Z,1516708439.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:00.354Z,1516708440.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:00.382Z,1516708440.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:00.757Z,1516708440.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:00.784Z,1516708440.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:01.156Z,1516708441.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:01.191Z,1516708441.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:01.572Z,1516708441.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:01.594Z,1516708441.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:01.978Z,1516708441.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:01.993Z,1516708441.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:02.383Z,1516708442.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:02.404Z,1516708442.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:02.755Z,1516708442.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:02.792Z,1516708442.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:03.157Z,1516708443.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:03.194Z,1516708443.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:03.557Z,1516708443.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:03.584Z,1516708443.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:03.957Z,1516708443.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:03.997Z,1516708443.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:04.360Z,1516708444.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:04.393Z,1516708444.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:04.776Z,1516708444.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:04.795Z,1516708444.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:05.172Z,1516708445.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:05.201Z,1516708445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:05.567Z,1516708445.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:05.594Z,1516708445.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:05.957Z,1516708445.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:06.001Z,1516708446.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:06.354Z,1516708446.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:06.369Z,1516708446.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:06.757Z,1516708446.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:06.772Z,1516708446.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:07.169Z,1516708447.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:07.206Z,1516708447.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:07.571Z,1516708447.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:07.604Z,1516708447.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:07.991Z,1516708447.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:08.007Z,1516708448.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:08.380Z,1516708448.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:08.409Z,1516708448.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:08.765Z,1516708448.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:08.781Z,1516708448.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:09.161Z,1516708449.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:09.181Z,1516708449.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:09.580Z,1516708449.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:09.616Z,1516708449.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:09.967Z,1516708449.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:09.983Z,1516708449.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:10.368Z,1516708450.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:10.384Z,1516708450.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:10.763Z,1516708450.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:10.789Z,1516708450.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:11.162Z,1516708451.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:11.182Z,1516708451.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:11.569Z,1516708451.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:11.585Z,1516708451.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:11.972Z,1516708451.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:11.993Z,1516708451.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:12.384Z,1516708452.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:12.418Z,1516708452.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:12.764Z,1516708452.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:12.784Z,1516708452.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:13.165Z,1516708453.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:13.181Z,1516708453.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:13.569Z,1516708453.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:13.589Z,1516708453.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:13.971Z,1516708453.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:13.993Z,1516708453.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:14.375Z,1516708454.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:14.390Z,1516708454.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:14.764Z,1516708454.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:14.784Z,1516708454.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:15.164Z,1516708455.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:15.179Z,1516708455.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:15.570Z,1516708455.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:15.601Z,1516708455.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:15.979Z,1516708455.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:15.994Z,1516708455.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:16.375Z,1516708456.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:16.390Z,1516708456.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:16.767Z,1516708456.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:16.782Z,1516708456.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:17.160Z,1516708457.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:17.187Z,1516708457.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:17.583Z,1516708457.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:17.598Z,1516708457.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:17.980Z,1516708457.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:17.995Z,1516708457.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:18.380Z,1516708458.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:18.395Z,1516708458.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:18.758Z,1516708458.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:18.793Z,1516708458.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:19.161Z,1516708459.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:19.189Z,1516708459.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:19.572Z,1516708459.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:19.603Z,1516708459.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:19.984Z,1516708459.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:19.999Z,1516708459.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:20.371Z,1516708460.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:20.395Z,1516708460.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:20.757Z,1516708460.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:20.786Z,1516708460.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:21.156Z,1516708461.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:21.172Z,1516708461.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:21.567Z,1516708461.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:21.605Z,1516708461.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:21.980Z,1516708461.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:22.007Z,1516708462.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:22.380Z,1516708462.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:22.405Z,1516708462.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:22.769Z,1516708462.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:22.801Z,1516708462.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:23.161Z,1516708463.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:23.181Z,1516708463.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:23.571Z,1516708463.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:23.587Z,1516708463.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:23.983Z,1516708463.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:24.014Z,1516708464.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:24.372Z,1516708464.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:24.387Z,1516708464.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:24.765Z,1516708464.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:24.780Z,1516708464.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:25.165Z,1516708465.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:25.180Z,1516708465.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:25.569Z,1516708465.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:25.585Z,1516708465.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:25.598Z,1516708465.598 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T11:54:25.971Z,1516708465.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:25.986Z,1516708465.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:26.370Z,1516708466.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:26.386Z,1516708466.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:26.761Z,1516708466.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:26.784Z,1516708466.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:27.164Z,1516708467.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:27.179Z,1516708467.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:27.568Z,1516708467.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:27.587Z,1516708467.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:27.973Z,1516708467.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:27.989Z,1516708467.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:28.374Z,1516708468.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:28.396Z,1516708468.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:28.764Z,1516708468.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:28.784Z,1516708468.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:29.164Z,1516708469.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:29.179Z,1516708469.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:29.574Z,1516708469.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:29.589Z,1516708469.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:29.974Z,1516708469.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:29.989Z,1516708469.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:30.374Z,1516708470.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:30.389Z,1516708470.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:30.765Z,1516708470.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:30.780Z,1516708470.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:31.160Z,1516708471.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:31.187Z,1516708471.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:31.575Z,1516708471.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:31.590Z,1516708471.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:31.977Z,1516708471.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:31.993Z,1516708471.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:32.379Z,1516708472.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:32.401Z,1516708472.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:32.764Z,1516708472.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:32.785Z,1516708472.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:33.163Z,1516708473.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:33.182Z,1516708473.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:33.574Z,1516708473.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:33.598Z,1516708473.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:33.979Z,1516708473.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:34.001Z,1516708474.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:34.373Z,1516708474.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:34.393Z,1516708474.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:34.757Z,1516708474.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:34.793Z,1516708474.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:35.160Z,1516708475.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:35.197Z,1516708475.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:35.573Z,1516708475.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:35.589Z,1516708475.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:35.976Z,1516708475.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:35.999Z,1516708475.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:36.367Z,1516708476.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:36.398Z,1516708476.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:36.765Z,1516708476.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:36.800Z,1516708476.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:37.165Z,1516708477.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:37.200Z,1516708477.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:37.575Z,1516708477.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:37.603Z,1516708477.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:37.975Z,1516708477.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:38.001Z,1516708478.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:38.380Z,1516708478.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:38.406Z,1516708478.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:38.769Z,1516708478.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:38.801Z,1516708478.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:39.164Z,1516708479.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:39.179Z,1516708479.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:39.572Z,1516708479.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:39.587Z,1516708479.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:39.979Z,1516708479.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:40.014Z,1516708480.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:40.367Z,1516708480.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:40.389Z,1516708480.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:40.764Z,1516708480.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:40.787Z,1516708480.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:41.169Z,1516708481.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:41.184Z,1516708481.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:41.565Z,1516708481.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:41.580Z,1516708481.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:41.971Z,1516708481.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:41.986Z,1516708481.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:42.371Z,1516708482.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:42.387Z,1516708482.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:42.770Z,1516708482.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:42.785Z,1516708482.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:43.166Z,1516708483.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:43.189Z,1516708483.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:43.565Z,1516708483.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:43.580Z,1516708483.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:43.965Z,1516708483.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:43.981Z,1516708483.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:44.365Z,1516708484.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:44.381Z,1516708484.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:44.770Z,1516708484.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:44.786Z,1516708484.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:45.170Z,1516708485.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:45.189Z,1516708485.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:45.572Z,1516708485.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:45.587Z,1516708485.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:45.964Z,1516708485.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:45.985Z,1516708485.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:46.369Z,1516708486.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:46.385Z,1516708486.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:46.766Z,1516708486.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:46.781Z,1516708486.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:47.160Z,1516708487.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:47.187Z,1516708487.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:47.564Z,1516708487.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:47.583Z,1516708487.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:47.992Z,1516708487.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:48.027Z,1516708488.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:51.068Z,1516708491.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:51.089Z,1516708491.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:51.207Z,1516708491.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:51.249Z,1516708491.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:51.539Z,1516708491.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:51.577Z,1516708491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:51.941Z,1516708491.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:51.956Z,1516708491.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:52.338Z,1516708492.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:52.365Z,1516708492.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:52.744Z,1516708492.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:52.759Z,1516708492.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:53.147Z,1516708493.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:53.162Z,1516708493.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:53.544Z,1516708493.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:53.558Z,1516708493.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:53.940Z,1516708493.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:53.955Z,1516708493.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:54.340Z,1516708494.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:54.360Z,1516708494.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:54.741Z,1516708494.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:54.757Z,1516708494.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:55.143Z,1516708495.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:55.158Z,1516708495.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:55.541Z,1516708495.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:55.560Z,1516708495.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:55.955Z,1516708495.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:55.991Z,1516708495.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:56.348Z,1516708496.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:56.369Z,1516708496.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:56.750Z,1516708496.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:56.772Z,1516708496.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:57.137Z,1516708497.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:57.161Z,1516708497.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:57.545Z,1516708497.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:57.559Z,1516708497.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:57.942Z,1516708497.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:57.964Z,1516708497.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:58.344Z,1516708498.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:58.360Z,1516708498.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:58.750Z,1516708498.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:58.766Z,1516708498.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:59.154Z,1516708499.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:59.169Z,1516708499.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:59.550Z,1516708499.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:59.566Z,1516708499.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:54:59.939Z,1516708499.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:54:59.959Z,1516708499.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:00.341Z,1516708500.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:00.360Z,1516708500.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:00.730Z,1516708500.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:00.758Z,1516708500.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:01.133Z,1516708501.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:01.159Z,1516708501.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:01.532Z,1516708501.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:01.568Z,1516708501.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:01.951Z,1516708501.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:01.966Z,1516708501.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:02.355Z,1516708502.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:02.370Z,1516708502.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:02.749Z,1516708502.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:02.775Z,1516708502.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:03.132Z,1516708503.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:03.165Z,1516708503.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:03.532Z,1516708503.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:03.564Z,1516708503.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:03.946Z,1516708503.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:03.961Z,1516708503.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:04.344Z,1516708504.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:04.363Z,1516708504.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:04.748Z,1516708504.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:04.769Z,1516708504.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:05.158Z,1516708505.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:05.173Z,1516708505.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:05.548Z,1516708505.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:05.569Z,1516708505.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:05.933Z,1516708505.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:05.965Z,1516708505.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:06.332Z,1516708506.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:06.365Z,1516708506.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:06.732Z,1516708506.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:06.765Z,1516708506.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:07.137Z,1516708507.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:07.163Z,1516708507.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:07.532Z,1516708507.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:07.561Z,1516708507.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:07.952Z,1516708507.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:07.967Z,1516708507.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:08.355Z,1516708508.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:08.370Z,1516708508.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:08.746Z,1516708508.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:08.779Z,1516708508.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:09.130Z,1516708509.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:09.158Z,1516708509.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:09.536Z,1516708509.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:09.563Z,1516708509.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:09.933Z,1516708509.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:09.966Z,1516708509.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:10.336Z,1516708510.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:10.362Z,1516708510.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:10.747Z,1516708510.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:10.769Z,1516708510.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:11.155Z,1516708511.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:11.170Z,1516708511.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:11.551Z,1516708511.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:11.566Z,1516708511.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:11.935Z,1516708511.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:11.968Z,1516708511.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:12.333Z,1516708512.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:12.370Z,1516708512.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:12.730Z,1516708512.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:12.745Z,1516708512.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:13.133Z,1516708513.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:13.148Z,1516708513.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:13.532Z,1516708513.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:13.547Z,1516708513.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:13.951Z,1516708513.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:13.977Z,1516708513.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:14.368Z,1516708514.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:14.382Z,1516708514.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:14.755Z,1516708514.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:14.789Z,1516708514.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:15.134Z,1516708515.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:15.149Z,1516708515.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:15.538Z,1516708515.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:15.557Z,1516708515.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:15.938Z,1516708515.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:15.953Z,1516708515.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:16.340Z,1516708516.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:16.361Z,1516708516.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:16.751Z,1516708516.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:16.782Z,1516708516.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:17.159Z,1516708517.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:17.185Z,1516708517.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:17.547Z,1516708517.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:17.562Z,1516708517.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:17.941Z,1516708517.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:17.956Z,1516708517.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:18.338Z,1516708518.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:18.360Z,1516708518.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:18.738Z,1516708518.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:18.753Z,1516708518.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:19.148Z,1516708519.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:19.185Z,1516708519.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:19.542Z,1516708519.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:19.565Z,1516708519.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:19.948Z,1516708519.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:19.964Z,1516708519.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:20.348Z,1516708520.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:20.363Z,1516708520.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:20.760Z,1516708520.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:20.798Z,1516708520.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:21.137Z,1516708521.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:21.156Z,1516708521.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:21.540Z,1516708521.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:21.555Z,1516708521.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:21.940Z,1516708521.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:21.961Z,1516708521.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:22.344Z,1516708522.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:22.363Z,1516708522.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:22.746Z,1516708522.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:22.769Z,1516708522.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:23.151Z,1516708523.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:23.166Z,1516708523.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:23.546Z,1516708523.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:23.565Z,1516708523.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:23.953Z,1516708523.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:23.968Z,1516708523.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:24.350Z,1516708524.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:24.365Z,1516708524.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:24.744Z,1516708524.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:24.763Z,1516708524.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:25.150Z,1516708525.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:25.169Z,1516708525.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:25.550Z,1516708525.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:25.573Z,1516708525.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:25.954Z,1516708525.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:25.970Z,1516708525.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:26.354Z,1516708526.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:26.377Z,1516708526.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:26.753Z,1516708526.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:26.769Z,1516708526.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:27.144Z,1516708527.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:27.165Z,1516708527.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:27.554Z,1516708527.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:27.573Z,1516708527.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:27.948Z,1516708527.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:27.963Z,1516708527.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:28.335Z,1516708528.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:28.369Z,1516708528.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:28.755Z,1516708528.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:28.770Z,1516708528.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:29.160Z,1516708529.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:29.175Z,1516708529.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:29.551Z,1516708529.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:29.573Z,1516708529.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:29.939Z,1516708529.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:29.972Z,1516708529.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:30.340Z,1516708530.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:30.372Z,1516708530.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:30.748Z,1516708530.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:30.768Z,1516708530.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:31.133Z,1516708531.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:31.166Z,1516708531.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:31.533Z,1516708531.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:31.567Z,1516708531.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:31.952Z,1516708531.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:31.967Z,1516708531.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:32.360Z,1516708532.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:32.374Z,1516708532.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:32.764Z,1516708532.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:32.785Z,1516708532.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:33.136Z,1516708533.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:33.163Z,1516708533.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:33.547Z,1516708533.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:33.567Z,1516708533.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:33.936Z,1516708533.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:33.975Z,1516708533.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:34.350Z,1516708534.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:34.365Z,1516708534.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:34.753Z,1516708534.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:34.768Z,1516708534.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:35.152Z,1516708535.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:35.185Z,1516708535.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:35.560Z,1516708535.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:35.575Z,1516708535.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:35.954Z,1516708535.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:35.969Z,1516708535.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:36.332Z,1516708536.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:36.361Z,1516708536.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:36.735Z,1516708536.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:36.766Z,1516708536.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:37.135Z,1516708537.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:37.150Z,1516708537.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:37.540Z,1516708537.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:37.575Z,1516708537.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:37.951Z,1516708537.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:37.978Z,1516708537.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:38.368Z,1516708538.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:38.389Z,1516708538.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:38.751Z,1516708538.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:38.788Z,1516708538.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:39.137Z,1516708539.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:39.157Z,1516708539.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:39.544Z,1516708539.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:39.581Z,1516708539.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:39.944Z,1516708539.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:39.959Z,1516708539.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:40.345Z,1516708540.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:40.365Z,1516708540.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:40.755Z,1516708540.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:40.770Z,1516708540.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:41.159Z,1516708541.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:41.174Z,1516708541.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:41.548Z,1516708541.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:41.569Z,1516708541.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:41.943Z,1516708541.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:41.958Z,1516708541.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:42.344Z,1516708542.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:42.359Z,1516708542.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:42.748Z,1516708542.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:42.763Z,1516708542.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:43.141Z,1516708543.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:43.164Z,1516708543.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:43.545Z,1516708543.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:43.559Z,1516708543.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:43.955Z,1516708543.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:43.971Z,1516708543.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:44.355Z,1516708544.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:44.370Z,1516708544.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:44.752Z,1516708544.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:44.767Z,1516708544.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:45.142Z,1516708545.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:45.166Z,1516708545.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:45.543Z,1516708545.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:45.558Z,1516708545.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:45.946Z,1516708545.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:45.961Z,1516708545.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:46.336Z,1516708546.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:46.364Z,1516708546.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:46.754Z,1516708546.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:46.769Z,1516708546.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:47.155Z,1516708547.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:47.170Z,1516708547.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:47.555Z,1516708547.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:47.570Z,1516708547.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:47.932Z,1516708547.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:47.977Z,1516708547.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:48.349Z,1516708548.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:48.357Z,1516708548.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x26692 got:0x15542 2018-01-23T11:55:48.377Z,1516708548.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:51.430Z,1516708551.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:51.461Z,1516708551.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:51.566Z,1516708551.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:51.581Z,1516708551.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:51.927Z,1516708551.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:51.965Z,1516708551.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:52.338Z,1516708552.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:52.354Z,1516708552.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x45518 got:0x13572 2018-01-23T11:55:52.373Z,1516708552.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:52.718Z,1516708552.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:52.763Z,1516708552.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:53.113Z,1516708553.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:53.128Z,1516708553.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:53.514Z,1516708553.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:53.529Z,1516708553.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:53.913Z,1516708553.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:53.933Z,1516708553.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:54.312Z,1516708554.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:54.331Z,1516708554.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:54.720Z,1516708554.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:54.735Z,1516708554.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:55.119Z,1516708555.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:55.135Z,1516708555.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:55.520Z,1516708555.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:55.539Z,1516708555.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:55.918Z,1516708555.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:55.941Z,1516708555.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:56.317Z,1516708556.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:56.337Z,1516708556.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:56.723Z,1516708556.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:56.740Z,1516708556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:57.123Z,1516708557.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:57.149Z,1516708557.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:57.520Z,1516708557.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:57.549Z,1516708557.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:57.912Z,1516708557.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:57.932Z,1516708557.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:58.312Z,1516708558.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:58.340Z,1516708558.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:58.726Z,1516708558.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:58.749Z,1516708558.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:59.132Z,1516708559.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:59.148Z,1516708559.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:59.530Z,1516708559.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:59.556Z,1516708559.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:55:59.911Z,1516708559.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:55:59.960Z,1516708559.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:00.342Z,1516708560.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:00.369Z,1516708560.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:00.749Z,1516708560.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:00.811Z,1516708560.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:01.129Z,1516708561.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:01.164Z,1516708561.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:01.522Z,1516708561.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:01.541Z,1516708561.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:01.918Z,1516708561.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:01.933Z,1516708561.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:02.314Z,1516708562.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:02.372Z,1516708562.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:02.739Z,1516708562.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:02.770Z,1516708562.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:03.127Z,1516708563.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:03.151Z,1516708563.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:03.529Z,1516708563.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:03.556Z,1516708563.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:03.920Z,1516708563.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:03.940Z,1516708563.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:04.337Z,1516708564.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:04.391Z,1516708564.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:04.728Z,1516708564.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:04.763Z,1516708564.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:05.148Z,1516708565.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:05.192Z,1516708565.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:05.522Z,1516708565.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:05.593Z,1516708565.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:05.911Z,1516708565.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:05.955Z,1516708565.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:06.320Z,1516708566.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:06.358Z,1516708566.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:06.730Z,1516708566.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:06.753Z,1516708566.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:07.134Z,1516708567.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:07.154Z,1516708567.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:07.551Z,1516708567.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:07.572Z,1516708567.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:07.917Z,1516708567.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:07.974Z,1516708567.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:08.312Z,1516708568.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:08.373Z,1516708568.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:08.729Z,1516708568.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:08.765Z,1516708568.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:09.137Z,1516708569.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:09.181Z,1516708569.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:09.530Z,1516708569.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:09.586Z,1516708569.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:09.936Z,1516708569.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:09.983Z,1516708569.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:10.317Z,1516708570.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:10.357Z,1516708570.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:10.721Z,1516708570.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:10.769Z,1516708570.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:11.156Z,1516708571.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:11.174Z,1516708571.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:11.530Z,1516708571.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:11.581Z,1516708571.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:11.920Z,1516708571.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:11.945Z,1516708571.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:12.333Z,1516708572.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:12.388Z,1516708572.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:12.717Z,1516708572.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:12.755Z,1516708572.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:13.122Z,1516708573.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:13.163Z,1516708573.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:13.521Z,1516708573.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:13.553Z,1516708573.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:13.911Z,1516708573.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:13.964Z,1516708573.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:14.323Z,1516708574.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:14.362Z,1516708574.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:14.729Z,1516708574.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:14.779Z,1516708574.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:15.121Z,1516708575.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:15.164Z,1516708575.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:15.518Z,1516708575.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:15.541Z,1516708575.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:15.935Z,1516708575.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:15.975Z,1516708575.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:16.310Z,1516708576.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:16.389Z,1516708576.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:16.730Z,1516708576.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:16.799Z,1516708576.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:17.125Z,1516708577.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:17.156Z,1516708577.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:17.523Z,1516708577.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:17.538Z,1516708577.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:17.911Z,1516708577.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:17.931Z,1516708577.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:18.307Z,1516708578.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:18.335Z,1516708578.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:18.704Z,1516708578.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:18.737Z,1516708578.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:19.127Z,1516708579.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:19.142Z,1516708579.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:19.527Z,1516708579.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:19.542Z,1516708579.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:19.924Z,1516708579.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:19.938Z,1516708579.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:20.304Z,1516708580.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:20.341Z,1516708580.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:20.708Z,1516708580.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:20.735Z,1516708580.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:21.105Z,1516708581.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:21.138Z,1516708581.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:21.508Z,1516708581.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:21.534Z,1516708581.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:21.924Z,1516708581.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:21.939Z,1516708581.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:22.328Z,1516708582.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:22.343Z,1516708582.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:22.720Z,1516708582.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:22.742Z,1516708582.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:23.104Z,1516708583.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:23.131Z,1516708583.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:23.503Z,1516708583.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:23.539Z,1516708583.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:23.905Z,1516708583.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:23.931Z,1516708583.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:24.305Z,1516708584.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:24.336Z,1516708584.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:24.704Z,1516708584.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:24.740Z,1516708584.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:25.124Z,1516708585.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:25.139Z,1516708585.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:25.526Z,1516708585.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:25.542Z,1516708585.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:25.918Z,1516708585.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:25.951Z,1516708585.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:26.304Z,1516708586.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:26.331Z,1516708586.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:26.703Z,1516708586.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:26.737Z,1516708586.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:27.105Z,1516708587.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:27.145Z,1516708587.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:27.503Z,1516708587.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:27.530Z,1516708587.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:27.922Z,1516708587.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:27.944Z,1516708587.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:28.326Z,1516708588.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:28.353Z,1516708588.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:28.724Z,1516708588.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:28.739Z,1516708588.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:29.120Z,1516708589.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:29.161Z,1516708589.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:29.172Z,1516708589.172 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:29.172Z,1516708589.172 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173 2018-01-23T11:56:29.172Z,1516708589.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:56:29.195Z,1516708589.195 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:56:29.505Z,1516708589.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:29.538Z,1516708589.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:29.538Z,1516708589.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173 2018-01-23T11:56:29.538Z,1516708589.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:56:29.540Z,1516708589.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:29.540Z,1516708589.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 173 2018-01-23T11:56:29.540Z,1516708589.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:56:29.552Z,1516708589.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:56:29.552Z,1516708589.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:56:29.552Z,1516708589.552 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:56:29.552Z,1516708589.552 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173 2018-01-23T11:56:29.909Z,1516708589.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:29.944Z,1516708589.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:56:29.944Z,1516708589.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:56:29.945Z,1516708589.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:56:29.956Z,1516708589.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:56:29.956Z,1516708589.956 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173 2018-01-23T11:56:29.957Z,1516708589.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:56:29.957Z,1516708589.957 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 173 2018-01-23T11:56:30.309Z,1516708590.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:30.335Z,1516708590.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:56:30.335Z,1516708590.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:56:30.336Z,1516708590.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:56:30.336Z,1516708590.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:56:30.336Z,1516708590.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:56:30.337Z,1516708590.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:56:30.704Z,1516708590.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:30.724Z,1516708590.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:56:30.725Z,1516708590.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:31.119Z,1516708591.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:31.146Z,1516708591.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:56:31.147Z,1516708591.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:31.519Z,1516708591.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:31.552Z,1516708591.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:56:31.553Z,1516708591.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:31.915Z,1516708591.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:31.949Z,1516708591.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:56:31.950Z,1516708591.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:32.305Z,1516708592.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:32.325Z,1516708592.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:56:32.326Z,1516708592.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:32.716Z,1516708592.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:32.752Z,1516708592.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:56:32.753Z,1516708592.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:33.111Z,1516708593.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:33.125Z,1516708593.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:56:33.126Z,1516708593.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:33.509Z,1516708593.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:33.528Z,1516708593.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:56:33.529Z,1516708593.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:33.919Z,1516708593.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:33.934Z,1516708593.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:56:33.936Z,1516708593.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:34.319Z,1516708594.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:34.340Z,1516708594.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:56:34.341Z,1516708594.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:34.728Z,1516708594.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:34.742Z,1516708594.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:56:34.759Z,1516708594.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:35.113Z,1516708595.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:35.128Z,1516708595.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:56:35.128Z,1516708595.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:35.513Z,1516708595.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:35.528Z,1516708595.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:56:35.529Z,1516708595.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:35.912Z,1516708595.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:35.928Z,1516708595.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:56:35.929Z,1516708595.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:36.312Z,1516708596.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:36.331Z,1516708596.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:56:36.332Z,1516708596.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:36.713Z,1516708596.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:36.728Z,1516708596.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:56:36.729Z,1516708596.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:37.118Z,1516708597.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:37.137Z,1516708597.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:56:37.138Z,1516708597.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:37.519Z,1516708597.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:37.541Z,1516708597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:56:37.542Z,1516708597.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:37.923Z,1516708597.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:37.937Z,1516708597.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:56:37.938Z,1516708597.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:38.313Z,1516708598.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:38.329Z,1516708598.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:56:38.329Z,1516708598.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:38.720Z,1516708598.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:38.740Z,1516708598.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:56:38.741Z,1516708598.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:39.114Z,1516708599.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:39.129Z,1516708599.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:56:39.130Z,1516708599.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:39.508Z,1516708599.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:39.530Z,1516708599.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:56:39.531Z,1516708599.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:39.922Z,1516708599.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:39.938Z,1516708599.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:56:39.939Z,1516708599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:40.327Z,1516708600.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:40.341Z,1516708600.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:56:40.342Z,1516708600.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:40.723Z,1516708600.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:40.744Z,1516708600.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:56:40.745Z,1516708600.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:41.113Z,1516708601.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:41.129Z,1516708601.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:56:41.129Z,1516708601.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:41.514Z,1516708601.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:41.529Z,1516708601.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:56:41.530Z,1516708601.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:41.909Z,1516708601.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:41.932Z,1516708601.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:56:41.933Z,1516708601.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:42.313Z,1516708602.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:42.333Z,1516708602.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:56:42.334Z,1516708602.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:42.714Z,1516708602.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:42.736Z,1516708602.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:56:42.737Z,1516708602.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:43.127Z,1516708603.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:43.141Z,1516708603.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:56:43.142Z,1516708603.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:43.528Z,1516708603.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:43.542Z,1516708603.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:56:43.543Z,1516708603.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:43.925Z,1516708603.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:43.939Z,1516708603.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:56:43.940Z,1516708603.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:44.311Z,1516708604.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:44.327Z,1516708604.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:56:44.328Z,1516708604.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:44.708Z,1516708604.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:44.740Z,1516708604.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:56:44.741Z,1516708604.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:45.109Z,1516708605.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:45.137Z,1516708605.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:56:45.138Z,1516708605.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:45.508Z,1516708605.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:45.537Z,1516708605.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:56:45.538Z,1516708605.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:45.924Z,1516708605.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:45.939Z,1516708605.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:56:45.940Z,1516708605.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:46.328Z,1516708606.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:46.345Z,1516708606.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:56:46.346Z,1516708606.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:46.728Z,1516708606.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:46.751Z,1516708606.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:56:46.752Z,1516708606.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:47.116Z,1516708607.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:47.151Z,1516708607.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:56:47.152Z,1516708607.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:47.514Z,1516708607.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:47.536Z,1516708607.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:56:47.537Z,1516708607.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:47.911Z,1516708607.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:47.926Z,1516708607.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:56:47.927Z,1516708607.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:48.318Z,1516708608.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:48.340Z,1516708608.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:56:48.341Z,1516708608.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:48.720Z,1516708608.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:48.735Z,1516708608.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:56:48.736Z,1516708608.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:52.024Z,1516708612.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:52.039Z,1516708612.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:52.148Z,1516708612.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:52.173Z,1516708612.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:52.525Z,1516708612.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:52.551Z,1516708612.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:52.925Z,1516708612.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:52.941Z,1516708612.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:53.313Z,1516708613.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:53.329Z,1516708613.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:53.710Z,1516708613.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:53.725Z,1516708613.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:54.132Z,1516708614.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:54.163Z,1516708614.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:54.536Z,1516708614.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:54.562Z,1516708614.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:54.932Z,1516708614.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:54.964Z,1516708614.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:55.317Z,1516708615.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:55.337Z,1516708615.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:55.714Z,1516708615.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:55.733Z,1516708615.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:56.113Z,1516708616.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:56.140Z,1516708616.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:56.514Z,1516708616.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:56.542Z,1516708616.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:56.932Z,1516708616.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:56.963Z,1516708616.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:57.324Z,1516708617.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:57.338Z,1516708617.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:57.723Z,1516708617.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:57.738Z,1516708617.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:58.117Z,1516708618.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:58.132Z,1516708618.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:58.521Z,1516708618.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:58.536Z,1516708618.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:58.917Z,1516708618.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:58.932Z,1516708618.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:59.316Z,1516708619.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:59.335Z,1516708619.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:56:59.717Z,1516708619.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:56:59.736Z,1516708619.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:00.124Z,1516708620.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:00.139Z,1516708620.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:00.524Z,1516708620.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:00.539Z,1516708620.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:00.923Z,1516708620.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:00.945Z,1516708620.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:01.322Z,1516708621.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:01.337Z,1516708621.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:01.713Z,1516708621.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:01.740Z,1516708621.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:02.122Z,1516708622.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:02.137Z,1516708622.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:02.523Z,1516708622.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:02.538Z,1516708622.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:02.927Z,1516708622.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:02.942Z,1516708622.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:03.326Z,1516708623.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:03.341Z,1516708623.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:03.728Z,1516708623.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:03.743Z,1516708623.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:04.116Z,1516708624.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:04.137Z,1516708624.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:04.516Z,1516708624.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:04.532Z,1516708624.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:04.918Z,1516708624.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:04.933Z,1516708624.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:05.316Z,1516708625.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:05.336Z,1516708625.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:05.717Z,1516708625.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:05.732Z,1516708625.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:06.124Z,1516708626.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:06.152Z,1516708626.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:06.530Z,1516708626.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:06.545Z,1516708626.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:06.928Z,1516708626.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:06.943Z,1516708626.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:07.318Z,1516708627.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:07.341Z,1516708627.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:07.711Z,1516708627.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:07.743Z,1516708627.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:08.110Z,1516708628.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:08.137Z,1516708628.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:08.523Z,1516708628.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:08.538Z,1516708628.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:08.924Z,1516708628.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:08.951Z,1516708628.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:09.333Z,1516708629.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:09.348Z,1516708629.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:09.729Z,1516708629.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:09.745Z,1516708629.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:10.108Z,1516708630.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:10.141Z,1516708630.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:10.508Z,1516708630.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:10.542Z,1516708630.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:10.906Z,1516708630.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:10.929Z,1516708630.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:11.309Z,1516708631.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:11.333Z,1516708631.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:11.708Z,1516708631.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:11.723Z,1516708631.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:12.119Z,1516708632.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:12.143Z,1516708632.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:12.544Z,1516708632.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:12.565Z,1516708632.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:12.922Z,1516708632.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:12.961Z,1516708632.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:13.313Z,1516708633.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:13.328Z,1516708633.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:13.713Z,1516708633.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:13.732Z,1516708633.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:14.115Z,1516708634.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:14.130Z,1516708634.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:14.517Z,1516708634.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:14.533Z,1516708634.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:14.919Z,1516708634.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:14.934Z,1516708634.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:15.323Z,1516708635.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:15.344Z,1516708635.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:15.731Z,1516708635.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:15.746Z,1516708635.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:16.121Z,1516708636.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:16.141Z,1516708636.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:16.516Z,1516708636.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:16.536Z,1516708636.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:16.908Z,1516708636.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:16.932Z,1516708636.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:17.309Z,1516708637.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:17.340Z,1516708637.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:17.716Z,1516708637.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:17.742Z,1516708637.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:18.119Z,1516708638.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:18.146Z,1516708638.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:18.539Z,1516708638.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:18.554Z,1516708638.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:18.919Z,1516708638.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:18.945Z,1516708638.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:19.317Z,1516708639.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:19.349Z,1516708639.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:19.716Z,1516708639.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:19.753Z,1516708639.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:20.109Z,1516708640.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:20.129Z,1516708640.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:20.516Z,1516708640.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:20.552Z,1516708640.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:20.927Z,1516708640.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:20.954Z,1516708640.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:21.327Z,1516708641.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:21.355Z,1516708641.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:21.722Z,1516708641.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:21.745Z,1516708641.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:22.120Z,1516708642.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:22.157Z,1516708642.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:22.519Z,1516708642.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:22.533Z,1516708642.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:22.913Z,1516708642.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:22.929Z,1516708642.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:23.314Z,1516708643.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:23.333Z,1516708643.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:23.715Z,1516708643.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:23.730Z,1516708643.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:24.121Z,1516708644.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:24.136Z,1516708644.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:24.535Z,1516708644.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:24.566Z,1516708644.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:24.935Z,1516708644.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:24.973Z,1516708644.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:25.321Z,1516708645.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:25.336Z,1516708645.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:25.719Z,1516708645.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:25.734Z,1516708645.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:26.120Z,1516708646.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:26.140Z,1516708646.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:26.521Z,1516708646.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:26.536Z,1516708646.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:26.922Z,1516708646.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:26.941Z,1516708646.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:27.325Z,1516708647.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:27.340Z,1516708647.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:27.723Z,1516708647.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:27.738Z,1516708647.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:28.122Z,1516708648.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:28.137Z,1516708648.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:28.515Z,1516708648.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:28.530Z,1516708648.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:28.921Z,1516708648.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:28.936Z,1516708648.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:29.320Z,1516708649.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:29.335Z,1516708649.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:29.720Z,1516708649.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:29.734Z,1516708649.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:30.123Z,1516708650.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:30.138Z,1516708650.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:30.525Z,1516708650.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:30.540Z,1516708650.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:30.923Z,1516708650.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:30.944Z,1516708650.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:31.322Z,1516708651.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:31.337Z,1516708651.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:31.722Z,1516708651.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:31.737Z,1516708651.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:32.120Z,1516708652.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:32.135Z,1516708652.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:32.520Z,1516708652.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:32.536Z,1516708652.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:32.936Z,1516708652.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:32.968Z,1516708652.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:33.331Z,1516708653.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:33.346Z,1516708653.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:33.730Z,1516708653.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:33.745Z,1516708653.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:34.113Z,1516708654.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:34.145Z,1516708654.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:34.518Z,1516708654.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:34.533Z,1516708654.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:34.919Z,1516708654.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:34.934Z,1516708654.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:35.313Z,1516708655.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:35.342Z,1516708655.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:35.715Z,1516708655.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:35.746Z,1516708655.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:36.131Z,1516708656.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:36.146Z,1516708656.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:36.535Z,1516708656.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:36.551Z,1516708656.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:36.931Z,1516708656.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:36.945Z,1516708656.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:37.320Z,1516708657.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:37.336Z,1516708657.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:37.726Z,1516708657.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:37.742Z,1516708657.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:38.122Z,1516708658.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:38.137Z,1516708658.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:38.521Z,1516708658.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:38.538Z,1516708658.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:38.928Z,1516708658.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:38.949Z,1516708658.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:39.331Z,1516708659.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:39.345Z,1516708659.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:39.732Z,1516708659.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:39.748Z,1516708659.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:40.111Z,1516708660.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:40.156Z,1516708660.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:40.509Z,1516708660.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:40.532Z,1516708660.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x34341 got:0x16908 2018-01-23T11:57:40.550Z,1516708660.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:40.908Z,1516708660.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:40.941Z,1516708660.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:41.314Z,1516708661.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:41.345Z,1516708661.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:41.708Z,1516708661.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:41.745Z,1516708661.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:42.130Z,1516708662.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:42.139Z,1516708662.139 [PNI_TCM](ERROR): CRC does not match. Expected:0x10734 got:0x1857 2018-01-23T11:57:42.182Z,1516708662.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:42.532Z,1516708662.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:42.548Z,1516708662.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:42.930Z,1516708662.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:42.946Z,1516708662.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:43.309Z,1516708663.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:43.360Z,1516708663.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:43.710Z,1516708663.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:43.732Z,1516708663.732 [PNI_TCM](ERROR): CRC does not match. Expected:0x31178 got:0x15532 2018-01-23T11:57:43.779Z,1516708663.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:44.124Z,1516708664.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:44.138Z,1516708664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:44.525Z,1516708664.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:44.540Z,1516708664.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:44.924Z,1516708664.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:44.959Z,1516708664.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:45.335Z,1516708665.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:45.350Z,1516708665.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:45.722Z,1516708665.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:45.762Z,1516708665.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:46.111Z,1516708666.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:46.149Z,1516708666.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:46.508Z,1516708666.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:46.549Z,1516708666.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:46.906Z,1516708666.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:46.932Z,1516708666.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:46.935Z,1516708666.935 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T11:52:46.8Z 2018-01-23T11:57:46.935Z,1516708666.935 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T11:57:46.935Z,1516708666.935 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T11:57:47.311Z,1516708667.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:47.341Z,1516708667.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:47.847Z,1516708667.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:47.862Z,1516708667.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:48.128Z,1516708668.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:48.165Z,1516708668.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:51.231Z,1516708671.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:51.257Z,1516708671.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:51.331Z,1516708671.331 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0204.lzma 2018-01-23T11:57:51.372Z,1516708671.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:51.395Z,1516708671.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:51.709Z,1516708671.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:51.746Z,1516708671.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:52.081Z,1516708672.081 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0204.lzma.bak 2018-01-23T11:57:52.082Z,1516708672.082 [DataOverHttps](INFO): SBD MOMSN=7755531 2018-01-23T11:57:52.121Z,1516708672.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:52.138Z,1516708672.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:52.750Z,1516708672.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:52.773Z,1516708672.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:52.914Z,1516708672.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:52.957Z,1516708672.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:56.015Z,1516708676.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:56.030Z,1516708676.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:56.140Z,1516708676.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:56.176Z,1516708676.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:56.503Z,1516708676.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:56.540Z,1516708676.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:56.910Z,1516708676.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:56.926Z,1516708676.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:57.309Z,1516708677.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:57.370Z,1516708677.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:57:57.697Z,1516708677.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:57:57.741Z,1516708677.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:00.814Z,1516708680.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:00.830Z,1516708680.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:00.907Z,1516708680.907 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0205.lzma 2018-01-23T11:58:00.940Z,1516708680.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:00.979Z,1516708680.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:01.295Z,1516708681.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:01.325Z,1516708681.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:01.661Z,1516708681.661 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0205.lzma.bak 2018-01-23T11:58:01.661Z,1516708681.661 [DataOverHttps](INFO): SBD MOMSN=7755533 2018-01-23T11:58:01.689Z,1516708681.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:01.728Z,1516708681.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:02.357Z,1516708682.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:02.377Z,1516708682.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:02.380Z,1516708682.380 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T11:58:02.380Z,1516708682.380 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T11:58:02.380Z,1516708682.380 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T11:58:02.481Z,1516708682.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:02.521Z,1516708682.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:05.592Z,1516708685.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:05.617Z,1516708685.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:05.728Z,1516708685.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:05.771Z,1516708685.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:06.080Z,1516708686.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:06.095Z,1516708686.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:06.474Z,1516708686.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:06.489Z,1516708686.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:06.868Z,1516708686.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:06.889Z,1516708686.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:07.269Z,1516708687.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:07.285Z,1516708687.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:07.669Z,1516708687.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:07.684Z,1516708687.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:08.079Z,1516708688.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:08.095Z,1516708688.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:08.478Z,1516708688.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:08.493Z,1516708688.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:08.885Z,1516708688.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:09.020Z,1516708689.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:09.271Z,1516708689.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:09.314Z,1516708689.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:09.668Z,1516708689.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:09.683Z,1516708689.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:10.068Z,1516708690.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:10.095Z,1516708690.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:10.461Z,1516708690.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:10.496Z,1516708690.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:10.860Z,1516708690.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:10.893Z,1516708690.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:11.280Z,1516708691.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:11.295Z,1516708691.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:11.686Z,1516708691.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:11.701Z,1516708691.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:12.076Z,1516708692.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:12.094Z,1516708692.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:12.465Z,1516708692.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:12.493Z,1516708692.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:12.866Z,1516708692.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:12.892Z,1516708692.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:13.262Z,1516708693.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:13.297Z,1516708693.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:13.678Z,1516708693.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:13.693Z,1516708693.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:14.085Z,1516708694.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:14.100Z,1516708694.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:14.484Z,1516708694.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:14.505Z,1516708694.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:14.881Z,1516708694.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:14.896Z,1516708694.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:15.261Z,1516708695.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:15.287Z,1516708695.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:15.694Z,1516708695.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:15.710Z,1516708695.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:16.060Z,1516708696.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:16.084Z,1516708696.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:16.462Z,1516708696.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:16.493Z,1516708696.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:16.864Z,1516708696.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:16.901Z,1516708696.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:17.271Z,1516708697.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:17.302Z,1516708697.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:17.693Z,1516708697.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:17.709Z,1516708697.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:18.089Z,1516708698.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:18.104Z,1516708698.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:18.469Z,1516708698.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:18.496Z,1516708698.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:18.869Z,1516708698.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:18.884Z,1516708698.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:19.266Z,1516708699.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:19.282Z,1516708699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:19.667Z,1516708699.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:19.681Z,1516708699.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:20.072Z,1516708700.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:20.087Z,1516708700.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:20.479Z,1516708700.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:20.494Z,1516708700.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:20.872Z,1516708700.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:20.887Z,1516708700.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:21.269Z,1516708701.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:21.289Z,1516708701.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:21.670Z,1516708701.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:21.685Z,1516708701.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:22.066Z,1516708702.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:22.097Z,1516708702.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:22.477Z,1516708702.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:22.505Z,1516708702.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:22.861Z,1516708702.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:22.898Z,1516708702.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:23.280Z,1516708703.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:23.296Z,1516708703.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:23.683Z,1516708703.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:23.705Z,1516708703.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:24.080Z,1516708704.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:24.095Z,1516708704.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:24.477Z,1516708704.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:24.492Z,1516708704.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:24.858Z,1516708704.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:24.889Z,1516708704.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:25.262Z,1516708705.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:25.293Z,1516708705.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:25.661Z,1516708705.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:25.694Z,1516708705.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:26.076Z,1516708706.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:26.098Z,1516708706.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:26.480Z,1516708706.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:26.509Z,1516708706.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:26.879Z,1516708706.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:26.894Z,1516708706.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:27.261Z,1516708707.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:27.287Z,1516708707.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:27.661Z,1516708707.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:27.693Z,1516708707.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:28.060Z,1516708708.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:28.097Z,1516708708.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:28.462Z,1516708708.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:28.489Z,1516708708.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:28.860Z,1516708708.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:28.897Z,1516708708.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:29.275Z,1516708709.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:29.303Z,1516708709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:29.671Z,1516708709.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:29.702Z,1516708709.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:30.079Z,1516708710.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:30.105Z,1516708710.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:30.465Z,1516708710.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:30.484Z,1516708710.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:30.859Z,1516708710.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:30.881Z,1516708710.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:31.266Z,1516708711.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:31.285Z,1516708711.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:31.668Z,1516708711.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:31.683Z,1516708711.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:32.079Z,1516708712.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:32.107Z,1516708712.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:32.475Z,1516708712.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:32.490Z,1516708712.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:32.871Z,1516708712.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:32.886Z,1516708712.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:33.270Z,1516708713.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:33.285Z,1516708713.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:33.670Z,1516708713.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:33.689Z,1516708713.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:34.069Z,1516708714.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:34.084Z,1516708714.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:34.466Z,1516708714.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:34.493Z,1516708714.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:34.871Z,1516708714.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:34.893Z,1516708714.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:35.279Z,1516708715.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:35.300Z,1516708715.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:35.679Z,1516708715.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:35.694Z,1516708715.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:36.079Z,1516708716.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:36.094Z,1516708716.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:36.469Z,1516708716.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:36.484Z,1516708716.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:36.864Z,1516708716.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:36.884Z,1516708716.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:37.265Z,1516708717.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:37.292Z,1516708717.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:37.668Z,1516708717.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:37.693Z,1516708717.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:38.079Z,1516708718.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:38.094Z,1516708718.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:38.481Z,1516708718.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:38.497Z,1516708718.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:38.880Z,1516708718.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:38.895Z,1516708718.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:39.264Z,1516708719.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:39.289Z,1516708719.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:39.663Z,1516708719.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:39.697Z,1516708719.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:40.070Z,1516708720.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:40.085Z,1516708720.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:40.465Z,1516708720.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:40.488Z,1516708720.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:40.863Z,1516708720.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:40.896Z,1516708720.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:41.283Z,1516708721.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:41.304Z,1516708721.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:41.679Z,1516708721.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:41.694Z,1516708721.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:42.079Z,1516708722.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:42.094Z,1516708722.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:42.470Z,1516708722.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:42.485Z,1516708722.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:42.858Z,1516708722.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:42.890Z,1516708722.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:43.266Z,1516708723.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:43.292Z,1516708723.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:43.660Z,1516708723.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:43.695Z,1516708723.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:44.080Z,1516708724.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:44.096Z,1516708724.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:44.480Z,1516708724.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:44.508Z,1516708724.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:44.871Z,1516708724.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:44.904Z,1516708724.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:45.265Z,1516708725.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:45.313Z,1516708725.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:45.660Z,1516708725.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:45.697Z,1516708725.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:46.064Z,1516708726.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:46.107Z,1516708726.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:46.462Z,1516708726.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:46.537Z,1516708726.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:46.860Z,1516708726.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:46.897Z,1516708726.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:47.276Z,1516708727.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:47.342Z,1516708727.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:47.671Z,1516708727.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:47.693Z,1516708727.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:48.076Z,1516708728.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:48.090Z,1516708728.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:48.464Z,1516708728.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:48.479Z,1516708728.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:48.858Z,1516708728.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:48.873Z,1516708728.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:49.261Z,1516708729.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:49.281Z,1516708729.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:49.662Z,1516708729.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:49.677Z,1516708729.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:50.071Z,1516708730.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:50.093Z,1516708730.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:50.475Z,1516708730.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:50.490Z,1516708730.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:50.875Z,1516708730.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:50.890Z,1516708730.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:51.265Z,1516708731.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:51.293Z,1516708731.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:51.665Z,1516708731.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:51.692Z,1516708731.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:52.061Z,1516708732.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:52.098Z,1516708732.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:52.466Z,1516708732.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:52.493Z,1516708732.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:52.860Z,1516708732.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:52.897Z,1516708732.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:53.276Z,1516708733.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:53.304Z,1516708733.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:53.672Z,1516708733.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:53.699Z,1516708733.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:54.071Z,1516708734.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:54.110Z,1516708734.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:54.464Z,1516708734.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:54.507Z,1516708734.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:54.858Z,1516708734.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:54.874Z,1516708734.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:55.261Z,1516708735.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:55.276Z,1516708735.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:55.668Z,1516708735.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:55.683Z,1516708735.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:56.071Z,1516708736.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:56.104Z,1516708736.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:56.482Z,1516708736.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:56.512Z,1516708736.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:56.882Z,1516708736.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:56.913Z,1516708736.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:57.269Z,1516708737.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:57.285Z,1516708737.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:57.667Z,1516708737.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:57.686Z,1516708737.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:58.070Z,1516708738.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:58.085Z,1516708738.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:58.470Z,1516708738.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:58.485Z,1516708738.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:58.869Z,1516708738.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:58.884Z,1516708738.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:59.275Z,1516708739.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:59.290Z,1516708739.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:58:59.676Z,1516708739.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:58:59.697Z,1516708739.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:00.078Z,1516708740.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:00.094Z,1516708740.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:00.469Z,1516708740.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:00.485Z,1516708740.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:00.864Z,1516708740.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:00.885Z,1516708740.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:01.264Z,1516708741.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:01.295Z,1516708741.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:01.669Z,1516708741.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:01.684Z,1516708741.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:02.078Z,1516708742.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:02.094Z,1516708742.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:02.482Z,1516708742.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:02.497Z,1516708742.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:02.879Z,1516708742.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:02.894Z,1516708742.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:05.994Z,1516708745.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:06.026Z,1516708746.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:06.116Z,1516708746.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:06.154Z,1516708746.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:06.484Z,1516708746.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:06.499Z,1516708746.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:06.895Z,1516708746.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:06.928Z,1516708746.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:07.284Z,1516708747.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:07.299Z,1516708747.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:07.682Z,1516708747.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:07.697Z,1516708747.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:08.077Z,1516708748.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:08.092Z,1516708748.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:08.473Z,1516708748.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:08.496Z,1516708748.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:08.871Z,1516708748.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:08.904Z,1516708748.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:09.288Z,1516708749.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:09.303Z,1516708749.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:09.690Z,1516708749.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:09.706Z,1516708749.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:10.087Z,1516708750.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:10.102Z,1516708750.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:10.478Z,1516708750.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:10.500Z,1516708750.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:10.866Z,1516708750.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:10.893Z,1516708750.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:11.269Z,1516708751.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:11.296Z,1516708751.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:11.668Z,1516708751.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:11.704Z,1516708751.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:12.084Z,1516708752.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:12.114Z,1516708752.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:12.491Z,1516708752.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:12.506Z,1516708752.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:12.886Z,1516708752.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:12.913Z,1516708752.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:13.269Z,1516708753.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:13.295Z,1516708753.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:13.669Z,1516708753.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:13.701Z,1516708753.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:14.068Z,1516708754.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:14.104Z,1516708754.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:14.473Z,1516708754.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:14.500Z,1516708754.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:14.872Z,1516708754.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:14.899Z,1516708754.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:15.285Z,1516708755.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:15.306Z,1516708755.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:15.696Z,1516708755.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:15.711Z,1516708755.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:16.084Z,1516708756.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:16.105Z,1516708756.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:16.468Z,1516708756.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:16.504Z,1516708756.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:16.866Z,1516708756.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:16.894Z,1516708756.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:17.273Z,1516708757.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:17.300Z,1516708757.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:17.667Z,1516708757.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:17.702Z,1516708757.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:18.083Z,1516708758.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:18.105Z,1516708758.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:18.490Z,1516708758.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:18.512Z,1516708758.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:18.878Z,1516708758.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:18.905Z,1516708758.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:19.269Z,1516708759.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:19.301Z,1516708759.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:19.668Z,1516708759.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:19.704Z,1516708759.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:20.068Z,1516708760.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:20.106Z,1516708760.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:20.473Z,1516708760.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:20.500Z,1516708760.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:20.868Z,1516708760.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:20.901Z,1516708760.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:21.293Z,1516708761.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:21.308Z,1516708761.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:21.694Z,1516708761.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:21.709Z,1516708761.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:22.092Z,1516708762.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:22.107Z,1516708762.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:22.469Z,1516708762.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:22.506Z,1516708762.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:22.867Z,1516708762.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:22.882Z,1516708762.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:23.270Z,1516708763.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:23.285Z,1516708763.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:23.669Z,1516708763.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:23.684Z,1516708763.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:24.084Z,1516708764.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:24.115Z,1516708764.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:24.488Z,1516708764.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:24.523Z,1516708764.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:24.892Z,1516708764.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:24.924Z,1516708764.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:25.274Z,1516708765.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:25.290Z,1516708765.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:25.675Z,1516708765.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:25.691Z,1516708765.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:26.076Z,1516708766.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:26.090Z,1516708766.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:26.474Z,1516708766.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:26.500Z,1516708766.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:26.874Z,1516708766.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:26.897Z,1516708766.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:27.291Z,1516708767.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:27.325Z,1516708767.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:27.679Z,1516708767.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:27.694Z,1516708767.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:28.091Z,1516708768.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:28.123Z,1516708768.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:28.476Z,1516708768.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:28.502Z,1516708768.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:28.872Z,1516708768.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:28.899Z,1516708768.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:29.280Z,1516708769.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:29.301Z,1516708769.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:29.681Z,1516708769.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:29.696Z,1516708769.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:30.082Z,1516708770.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:30.097Z,1516708770.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:30.099Z,1516708770.099 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:30.099Z,1516708770.099 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174 2018-01-23T11:59:30.099Z,1516708770.099 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T11:59:30.128Z,1516708770.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T11:59:30.495Z,1516708770.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:30.510Z,1516708770.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:30.510Z,1516708770.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174 2018-01-23T11:59:30.510Z,1516708770.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T11:59:30.528Z,1516708770.528 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:30.528Z,1516708770.528 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 174 2018-01-23T11:59:30.528Z,1516708770.528 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T11:59:30.545Z,1516708770.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T11:59:30.545Z,1516708770.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T11:59:30.546Z,1516708770.546 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T11:59:30.546Z,1516708770.546 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174 2018-01-23T11:59:30.887Z,1516708770.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:30.901Z,1516708770.901 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T11:59:30.901Z,1516708770.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:59:30.902Z,1516708770.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:59:30.913Z,1516708770.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T11:59:30.913Z,1516708770.913 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174 2018-01-23T11:59:30.913Z,1516708770.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T11:59:30.913Z,1516708770.913 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 174 2018-01-23T11:59:31.269Z,1516708771.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:31.303Z,1516708771.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T11:59:31.304Z,1516708771.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:59:31.304Z,1516708771.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:59:31.305Z,1516708771.305 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T11:59:31.305Z,1516708771.305 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T11:59:31.305Z,1516708771.305 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T11:59:31.669Z,1516708771.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:31.695Z,1516708771.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T11:59:31.696Z,1516708771.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:32.068Z,1516708772.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:32.104Z,1516708772.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T11:59:32.105Z,1516708772.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:32.469Z,1516708772.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:32.509Z,1516708772.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T11:59:32.510Z,1516708772.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:32.885Z,1516708772.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:32.904Z,1516708772.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T11:59:32.905Z,1516708772.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:33.288Z,1516708773.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:33.303Z,1516708773.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T11:59:33.304Z,1516708773.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:33.688Z,1516708773.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:33.755Z,1516708773.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T11:59:33.756Z,1516708773.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:34.091Z,1516708774.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:34.112Z,1516708774.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T11:59:34.113Z,1516708774.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:34.468Z,1516708774.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:34.505Z,1516708774.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T11:59:34.506Z,1516708774.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:34.866Z,1516708774.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:34.893Z,1516708774.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T11:59:34.894Z,1516708774.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:35.269Z,1516708775.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:35.295Z,1516708775.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T11:59:35.296Z,1516708775.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:35.668Z,1516708775.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:35.704Z,1516708775.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T11:59:35.705Z,1516708775.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:36.086Z,1516708776.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:36.109Z,1516708776.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T11:59:36.110Z,1516708776.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:36.492Z,1516708776.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:36.506Z,1516708776.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T11:59:36.507Z,1516708776.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:36.887Z,1516708776.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:36.901Z,1516708776.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T11:59:36.902Z,1516708776.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:37.270Z,1516708777.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:37.308Z,1516708777.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T11:59:37.309Z,1516708777.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:37.673Z,1516708777.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:37.699Z,1516708777.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T11:59:37.700Z,1516708777.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:38.083Z,1516708778.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:38.107Z,1516708778.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T11:59:38.108Z,1516708778.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:38.494Z,1516708778.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:38.508Z,1516708778.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T11:59:38.509Z,1516708778.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:38.883Z,1516708778.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:38.906Z,1516708778.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T11:59:38.908Z,1516708778.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:39.269Z,1516708779.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:39.304Z,1516708779.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T11:59:39.305Z,1516708779.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:39.700Z,1516708779.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:39.715Z,1516708779.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T11:59:39.716Z,1516708779.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:40.088Z,1516708780.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:40.102Z,1516708780.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T11:59:40.104Z,1516708780.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:40.492Z,1516708780.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:40.506Z,1516708780.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T11:59:40.507Z,1516708780.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:40.883Z,1516708780.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:40.916Z,1516708780.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T11:59:40.917Z,1516708780.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:41.269Z,1516708781.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:41.304Z,1516708781.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T11:59:41.305Z,1516708781.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:41.668Z,1516708781.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:41.701Z,1516708781.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T11:59:41.702Z,1516708781.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:42.087Z,1516708782.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:42.105Z,1516708782.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T11:59:42.106Z,1516708782.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:42.499Z,1516708782.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:42.514Z,1516708782.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T11:59:42.515Z,1516708782.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:42.888Z,1516708782.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:42.903Z,1516708782.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T11:59:42.904Z,1516708782.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:43.269Z,1516708783.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:43.300Z,1516708783.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T11:59:43.301Z,1516708783.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:43.668Z,1516708783.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:43.704Z,1516708783.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T11:59:43.705Z,1516708783.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:44.079Z,1516708784.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:44.114Z,1516708784.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T11:59:44.115Z,1516708784.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:44.491Z,1516708784.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:44.506Z,1516708784.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T11:59:44.508Z,1516708784.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:44.879Z,1516708784.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:44.913Z,1516708784.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T11:59:44.913Z,1516708784.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:45.269Z,1516708785.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:45.305Z,1516708785.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T11:59:45.306Z,1516708785.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:45.668Z,1516708785.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:45.695Z,1516708785.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T11:59:45.696Z,1516708785.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:46.079Z,1516708786.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:46.105Z,1516708786.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T11:59:46.106Z,1516708786.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:46.483Z,1516708786.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:46.518Z,1516708786.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T11:59:46.519Z,1516708786.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:46.879Z,1516708786.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:46.914Z,1516708786.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T11:59:46.915Z,1516708786.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:47.269Z,1516708787.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:47.308Z,1516708787.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T11:59:47.309Z,1516708787.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:47.667Z,1516708787.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:47.682Z,1516708787.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T11:59:47.683Z,1516708787.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:48.083Z,1516708788.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:48.110Z,1516708788.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T11:59:48.115Z,1516708788.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:48.487Z,1516708788.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:48.521Z,1516708788.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T11:59:48.522Z,1516708788.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:48.891Z,1516708788.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:48.916Z,1516708788.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T11:59:48.917Z,1516708788.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:49.274Z,1516708789.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:49.292Z,1516708789.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T11:59:49.293Z,1516708789.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:49.677Z,1516708789.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:49.692Z,1516708789.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T11:59:49.693Z,1516708789.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:50.079Z,1516708790.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:50.094Z,1516708790.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T11:59:50.095Z,1516708790.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:50.483Z,1516708790.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:50.498Z,1516708790.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T11:59:50.499Z,1516708790.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:50.879Z,1516708790.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:50.894Z,1516708790.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:51.277Z,1516708791.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:51.296Z,1516708791.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:51.673Z,1516708791.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:51.696Z,1516708791.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:52.083Z,1516708792.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:52.099Z,1516708792.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:52.483Z,1516708792.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:52.498Z,1516708792.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:52.882Z,1516708792.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:52.901Z,1516708792.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:53.277Z,1516708793.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:53.292Z,1516708793.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:53.677Z,1516708793.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:53.692Z,1516708793.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:54.081Z,1516708794.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:54.101Z,1516708794.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:54.483Z,1516708794.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:54.498Z,1516708794.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:54.882Z,1516708794.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:54.897Z,1516708794.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:55.276Z,1516708795.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:55.294Z,1516708795.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:55.676Z,1516708795.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:55.691Z,1516708795.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:56.082Z,1516708796.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:56.104Z,1516708796.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:56.487Z,1516708796.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:56.502Z,1516708796.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:56.880Z,1516708796.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:56.901Z,1516708796.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:57.281Z,1516708797.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:57.296Z,1516708797.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:57.677Z,1516708797.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:57.692Z,1516708797.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:58.082Z,1516708798.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:58.097Z,1516708798.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:58.483Z,1516708798.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:58.504Z,1516708798.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:58.882Z,1516708798.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:58.897Z,1516708798.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:59.273Z,1516708799.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:59.300Z,1516708799.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T11:59:59.682Z,1516708799.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T11:59:59.700Z,1516708799.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:00.083Z,1516708800.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:00.111Z,1516708800.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:00.491Z,1516708800.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:00.506Z,1516708800.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:00.888Z,1516708800.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:00.903Z,1516708800.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:01.282Z,1516708801.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:01.297Z,1516708801.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:01.685Z,1516708801.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:01.700Z,1516708801.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:02.089Z,1516708802.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:02.104Z,1516708802.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:02.488Z,1516708802.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:02.516Z,1516708802.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:02.888Z,1516708802.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:02.903Z,1516708802.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:05.999Z,1516708805.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:06.014Z,1516708806.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:06.114Z,1516708806.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:06.149Z,1516708806.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:06.516Z,1516708806.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:06.549Z,1516708806.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:06.920Z,1516708806.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:06.946Z,1516708806.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:07.311Z,1516708807.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:07.344Z,1516708807.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:07.704Z,1516708807.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:07.747Z,1516708807.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:08.105Z,1516708808.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:08.145Z,1516708808.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:08.500Z,1516708808.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:08.521Z,1516708808.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:08.902Z,1516708808.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:08.921Z,1516708808.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:09.315Z,1516708809.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:09.352Z,1516708809.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:09.707Z,1516708809.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:09.723Z,1516708809.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:10.104Z,1516708810.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:10.119Z,1516708810.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:10.501Z,1516708810.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:10.516Z,1516708810.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:10.900Z,1516708810.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:10.920Z,1516708810.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:11.297Z,1516708811.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:11.340Z,1516708811.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:11.706Z,1516708811.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:11.722Z,1516708811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:12.106Z,1516708812.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:12.122Z,1516708812.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:12.520Z,1516708812.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:12.555Z,1516708812.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:12.911Z,1516708812.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:12.927Z,1516708812.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:13.300Z,1516708813.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:13.320Z,1516708813.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:13.700Z,1516708813.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:13.715Z,1516708813.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:14.108Z,1516708814.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:14.137Z,1516708814.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:14.514Z,1516708814.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:14.537Z,1516708814.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:14.912Z,1516708814.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:14.928Z,1516708814.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:15.293Z,1516708815.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:15.321Z,1516708815.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:15.692Z,1516708815.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:15.718Z,1516708815.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:16.110Z,1516708816.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:16.139Z,1516708816.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:16.520Z,1516708816.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:16.536Z,1516708816.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:16.912Z,1516708816.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:16.927Z,1516708816.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:17.315Z,1516708817.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:17.330Z,1516708817.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:17.693Z,1516708817.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:17.722Z,1516708817.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:18.110Z,1516708818.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:18.161Z,1516708818.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:18.512Z,1516708818.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:18.535Z,1516708818.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:18.908Z,1516708818.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:18.933Z,1516708818.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:19.293Z,1516708819.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:19.329Z,1516708819.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:19.692Z,1516708819.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:19.731Z,1516708819.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:20.108Z,1516708820.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:20.133Z,1516708820.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:20.514Z,1516708820.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:20.537Z,1516708820.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:20.911Z,1516708820.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:20.933Z,1516708820.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:21.293Z,1516708821.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:21.326Z,1516708821.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:21.692Z,1516708821.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:21.729Z,1516708821.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:22.103Z,1516708822.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:22.130Z,1516708822.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:22.524Z,1516708822.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:22.540Z,1516708822.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:22.903Z,1516708822.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:22.930Z,1516708822.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:23.293Z,1516708823.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:23.329Z,1516708823.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:23.691Z,1516708823.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:23.730Z,1516708823.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:24.103Z,1516708824.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:24.137Z,1516708824.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:24.515Z,1516708824.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:24.537Z,1516708824.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:24.903Z,1516708824.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:24.933Z,1516708824.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:25.297Z,1516708825.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:25.329Z,1516708825.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:25.692Z,1516708825.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:25.729Z,1516708825.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:26.103Z,1516708826.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:26.138Z,1516708826.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:26.507Z,1516708826.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:26.533Z,1516708826.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:26.903Z,1516708826.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:26.929Z,1516708826.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:27.292Z,1516708827.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:27.337Z,1516708827.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:27.697Z,1516708827.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:27.729Z,1516708827.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:28.092Z,1516708828.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:28.113Z,1516708828.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:28.511Z,1516708828.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:28.537Z,1516708828.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:28.915Z,1516708828.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:28.945Z,1516708828.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:29.315Z,1516708829.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:29.345Z,1516708829.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:29.697Z,1516708829.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:29.716Z,1516708829.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:30.100Z,1516708830.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:30.137Z,1516708830.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:30.501Z,1516708830.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:30.516Z,1516708830.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:30.900Z,1516708830.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:30.915Z,1516708830.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:31.307Z,1516708831.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:31.323Z,1516708831.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:31.715Z,1516708831.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:31.749Z,1516708831.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:32.103Z,1516708832.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:32.124Z,1516708832.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:32.501Z,1516708832.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:32.517Z,1516708832.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:32.898Z,1516708832.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:32.922Z,1516708832.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:33.301Z,1516708833.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:33.316Z,1516708833.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:33.700Z,1516708833.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:33.723Z,1516708833.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:34.100Z,1516708834.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:34.115Z,1516708834.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:34.511Z,1516708834.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:34.526Z,1516708834.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:34.909Z,1516708834.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:34.925Z,1516708834.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:35.310Z,1516708835.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:35.326Z,1516708835.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:35.701Z,1516708835.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:35.716Z,1516708835.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:36.096Z,1516708836.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:36.118Z,1516708836.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:36.497Z,1516708836.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:36.524Z,1516708836.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:36.905Z,1516708836.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:36.920Z,1516708836.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:37.311Z,1516708837.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:37.327Z,1516708837.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:37.714Z,1516708837.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:37.737Z,1516708837.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:38.116Z,1516708838.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:38.131Z,1516708838.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:38.504Z,1516708838.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:38.523Z,1516708838.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:38.892Z,1516708838.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:38.925Z,1516708838.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:39.303Z,1516708839.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:39.332Z,1516708839.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:39.706Z,1516708839.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:39.721Z,1516708839.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:40.092Z,1516708840.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:40.125Z,1516708840.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:40.512Z,1516708840.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:40.527Z,1516708840.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:40.915Z,1516708840.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:40.937Z,1516708840.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:41.315Z,1516708841.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:41.337Z,1516708841.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:41.693Z,1516708841.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:41.730Z,1516708841.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:42.106Z,1516708842.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:42.121Z,1516708842.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:42.494Z,1516708842.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:42.528Z,1516708842.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:42.906Z,1516708842.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:42.921Z,1516708842.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:43.313Z,1516708843.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:43.333Z,1516708843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:43.718Z,1516708843.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:43.734Z,1516708843.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:44.117Z,1516708844.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:44.132Z,1516708844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:44.504Z,1516708844.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:44.524Z,1516708844.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:44.892Z,1516708844.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:44.925Z,1516708844.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:45.292Z,1516708845.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:45.335Z,1516708845.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:45.705Z,1516708845.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:45.721Z,1516708845.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:46.092Z,1516708846.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:46.126Z,1516708846.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:46.512Z,1516708846.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:46.528Z,1516708846.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:46.914Z,1516708846.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:46.933Z,1516708846.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:47.312Z,1516708847.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:47.327Z,1516708847.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:47.692Z,1516708847.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:47.729Z,1516708847.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:48.109Z,1516708848.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:48.125Z,1516708848.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:48.508Z,1516708848.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:48.527Z,1516708848.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:48.893Z,1516708848.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:48.930Z,1516708848.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:49.312Z,1516708849.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:49.328Z,1516708849.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:49.712Z,1516708849.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:49.735Z,1516708849.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:50.112Z,1516708850.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:50.127Z,1516708850.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:50.493Z,1516708850.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:50.520Z,1516708850.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:50.891Z,1516708850.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:50.921Z,1516708850.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:51.292Z,1516708851.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:51.331Z,1516708851.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:51.697Z,1516708851.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:51.725Z,1516708851.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:52.092Z,1516708852.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:52.119Z,1516708852.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:52.509Z,1516708852.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:52.538Z,1516708852.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:52.919Z,1516708852.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:52.941Z,1516708852.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:53.312Z,1516708853.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:53.328Z,1516708853.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:53.692Z,1516708853.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:53.727Z,1516708853.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:54.090Z,1516708854.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:54.129Z,1516708854.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:54.512Z,1516708854.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:54.535Z,1516708854.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:54.898Z,1516708854.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:54.937Z,1516708854.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:55.306Z,1516708855.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:55.342Z,1516708855.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:55.736Z,1516708855.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:55.762Z,1516708855.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:56.138Z,1516708856.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:56.215Z,1516708856.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:56.512Z,1516708856.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:56.550Z,1516708856.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:56.908Z,1516708856.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:56.957Z,1516708856.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:57.336Z,1516708857.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:57.398Z,1516708857.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:57.700Z,1516708857.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:57.717Z,1516708857.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:58.103Z,1516708858.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:58.119Z,1516708858.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:58.503Z,1516708858.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:58.525Z,1516708858.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:58.922Z,1516708858.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:58.946Z,1516708858.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:59.303Z,1516708859.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:59.318Z,1516708859.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:00:59.700Z,1516708859.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:00:59.717Z,1516708859.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:00.098Z,1516708860.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:00.118Z,1516708860.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:00.528Z,1516708860.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:00.575Z,1516708860.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:00.903Z,1516708860.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:00.959Z,1516708860.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:01.315Z,1516708861.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:01.334Z,1516708861.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:01.716Z,1516708861.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:01.737Z,1516708861.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:02.114Z,1516708862.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:02.195Z,1516708862.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:02.495Z,1516708862.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:02.526Z,1516708862.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:02.898Z,1516708862.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:02.937Z,1516708862.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:09.346Z,1516708869.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:09.381Z,1516708869.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:09.480Z,1516708869.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:09.529Z,1516708869.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:09.861Z,1516708869.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:09.885Z,1516708869.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:10.281Z,1516708870.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:10.336Z,1516708870.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:10.659Z,1516708870.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:10.678Z,1516708870.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:11.042Z,1516708871.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:11.078Z,1516708871.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:11.439Z,1516708871.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:11.510Z,1516708871.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:11.838Z,1516708871.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:11.878Z,1516708871.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:12.253Z,1516708872.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:12.289Z,1516708872.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:12.663Z,1516708872.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:12.716Z,1516708872.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:13.051Z,1516708873.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:13.094Z,1516708873.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:13.444Z,1516708873.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:13.458Z,1516708873.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:13.845Z,1516708873.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:13.860Z,1516708873.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:14.240Z,1516708874.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:14.267Z,1516708874.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:14.648Z,1516708874.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:14.669Z,1516708874.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:15.049Z,1516708875.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:15.064Z,1516708875.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:15.450Z,1516708875.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:15.465Z,1516708875.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:15.851Z,1516708875.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:15.866Z,1516708875.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:16.250Z,1516708876.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:16.265Z,1516708876.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:16.644Z,1516708876.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:16.665Z,1516708876.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:17.044Z,1516708877.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:17.059Z,1516708877.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:17.446Z,1516708877.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:17.464Z,1516708877.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:17.841Z,1516708877.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:17.857Z,1516708877.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:18.252Z,1516708878.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:18.267Z,1516708878.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:18.651Z,1516708878.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:18.666Z,1516708878.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:19.049Z,1516708879.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:19.069Z,1516708879.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:19.450Z,1516708879.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:19.469Z,1516708879.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:19.845Z,1516708879.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:19.860Z,1516708879.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:20.244Z,1516708880.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:20.259Z,1516708880.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:20.641Z,1516708880.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:20.664Z,1516708880.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:21.049Z,1516708881.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:21.094Z,1516708881.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:21.454Z,1516708881.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:21.473Z,1516708881.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:21.855Z,1516708881.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:21.870Z,1516708881.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:22.259Z,1516708882.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:22.289Z,1516708882.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:22.637Z,1516708882.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:22.657Z,1516708882.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:23.041Z,1516708883.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:23.056Z,1516708883.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:23.442Z,1516708883.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:23.456Z,1516708883.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:23.837Z,1516708883.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:23.857Z,1516708883.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:24.255Z,1516708884.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:24.286Z,1516708884.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:24.659Z,1516708884.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:24.694Z,1516708884.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:25.048Z,1516708885.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:25.063Z,1516708885.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:25.445Z,1516708885.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:25.465Z,1516708885.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:25.844Z,1516708885.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:25.859Z,1516708885.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:26.248Z,1516708886.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:26.263Z,1516708886.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:26.652Z,1516708886.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:26.667Z,1516708886.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:27.047Z,1516708887.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:27.062Z,1516708887.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:27.446Z,1516708887.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:27.461Z,1516708887.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:27.842Z,1516708887.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:27.862Z,1516708887.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:28.256Z,1516708888.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:28.271Z,1516708888.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:28.655Z,1516708888.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:28.670Z,1516708888.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:29.058Z,1516708889.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:29.073Z,1516708889.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:29.446Z,1516708889.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:29.461Z,1516708889.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:29.840Z,1516708889.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:29.869Z,1516708889.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:30.255Z,1516708890.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:30.270Z,1516708890.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:30.693Z,1516708890.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:30.727Z,1516708890.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:31.048Z,1516708891.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:31.074Z,1516708891.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:31.437Z,1516708891.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:31.453Z,1516708891.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:31.837Z,1516708891.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:31.853Z,1516708891.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:32.252Z,1516708892.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:32.277Z,1516708892.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:32.652Z,1516708892.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:32.677Z,1516708892.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:33.048Z,1516708893.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:33.083Z,1516708893.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:33.445Z,1516708893.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:33.477Z,1516708893.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:33.844Z,1516708893.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:33.881Z,1516708893.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:34.256Z,1516708894.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:34.289Z,1516708894.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:34.651Z,1516708894.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:34.666Z,1516708894.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:35.060Z,1516708895.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:35.090Z,1516708895.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:35.443Z,1516708895.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:35.462Z,1516708895.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:35.843Z,1516708895.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:35.862Z,1516708895.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:36.255Z,1516708896.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:36.270Z,1516708896.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:36.655Z,1516708896.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:36.670Z,1516708896.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:37.055Z,1516708897.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:37.071Z,1516708897.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:37.441Z,1516708897.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:37.464Z,1516708897.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:37.841Z,1516708897.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:37.864Z,1516708897.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:38.256Z,1516708898.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:38.281Z,1516708898.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:38.658Z,1516708898.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:38.673Z,1516708898.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:39.060Z,1516708899.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:39.075Z,1516708899.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:39.444Z,1516708899.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:39.472Z,1516708899.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:39.837Z,1516708899.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:39.869Z,1516708899.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:40.252Z,1516708900.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:40.280Z,1516708900.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:40.664Z,1516708900.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:40.679Z,1516708900.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:41.055Z,1516708901.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:41.071Z,1516708901.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:41.445Z,1516708901.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:41.474Z,1516708901.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:41.837Z,1516708901.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:41.872Z,1516708901.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:42.260Z,1516708902.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:42.275Z,1516708902.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:42.656Z,1516708902.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:42.687Z,1516708902.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:43.052Z,1516708903.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:43.079Z,1516708903.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:43.437Z,1516708903.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:43.453Z,1516708903.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:43.837Z,1516708903.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:43.853Z,1516708903.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:44.256Z,1516708904.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:44.283Z,1516708904.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:44.673Z,1516708904.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:44.688Z,1516708904.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:45.060Z,1516708905.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:45.097Z,1516708905.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:45.445Z,1516708905.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:45.461Z,1516708905.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:45.841Z,1516708905.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:45.861Z,1516708905.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:46.252Z,1516708906.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:46.268Z,1516708906.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:46.652Z,1516708906.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:46.667Z,1516708906.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:47.048Z,1516708907.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:47.062Z,1516708907.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:47.451Z,1516708907.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:47.466Z,1516708907.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:47.850Z,1516708907.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:47.865Z,1516708907.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:48.252Z,1516708908.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:48.267Z,1516708908.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:48.652Z,1516708908.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:48.667Z,1516708908.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:49.049Z,1516708909.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:49.076Z,1516708909.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:49.444Z,1516708909.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:49.471Z,1516708909.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:49.851Z,1516708909.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:49.866Z,1516708909.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:50.253Z,1516708910.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:50.280Z,1516708910.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:50.665Z,1516708910.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:50.681Z,1516708910.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:51.056Z,1516708911.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:51.075Z,1516708911.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:51.437Z,1516708911.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:51.473Z,1516708911.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:51.840Z,1516708911.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:51.867Z,1516708911.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:52.251Z,1516708912.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:52.285Z,1516708912.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:52.657Z,1516708912.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:52.685Z,1516708912.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:53.051Z,1516708913.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:53.078Z,1516708913.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:53.437Z,1516708913.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:53.483Z,1516708913.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:53.836Z,1516708913.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:53.873Z,1516708913.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:54.247Z,1516708914.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:54.284Z,1516708914.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:54.659Z,1516708914.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:54.686Z,1516708914.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:55.051Z,1516708915.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:55.085Z,1516708915.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:55.449Z,1516708915.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:55.464Z,1516708915.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:55.844Z,1516708915.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:55.859Z,1516708915.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:56.251Z,1516708916.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:56.289Z,1516708916.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:56.660Z,1516708916.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:56.674Z,1516708916.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:57.051Z,1516708917.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:57.072Z,1516708917.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:57.447Z,1516708917.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:57.462Z,1516708917.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:57.844Z,1516708917.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:57.859Z,1516708917.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:58.250Z,1516708918.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:58.272Z,1516708918.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:58.654Z,1516708918.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:58.670Z,1516708918.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:59.049Z,1516708919.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:59.065Z,1516708919.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:59.446Z,1516708919.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:59.461Z,1516708919.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:01:59.844Z,1516708919.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:01:59.865Z,1516708919.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:00.250Z,1516708920.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:00.265Z,1516708920.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:00.650Z,1516708920.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:00.665Z,1516708920.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:01.050Z,1516708921.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:01.065Z,1516708921.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:01.444Z,1516708921.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:01.459Z,1516708921.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:01.846Z,1516708921.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:01.861Z,1516708921.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:02.244Z,1516708922.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:02.259Z,1516708922.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:02.650Z,1516708922.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:02.673Z,1516708922.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:03.051Z,1516708923.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:03.066Z,1516708923.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:06.153Z,1516708926.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:06.168Z,1516708926.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:06.274Z,1516708926.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:06.301Z,1516708926.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:06.639Z,1516708926.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:06.659Z,1516708926.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:07.045Z,1516708927.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:07.060Z,1516708927.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:07.441Z,1516708927.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:07.456Z,1516708927.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:07.837Z,1516708927.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:07.860Z,1516708927.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:08.242Z,1516708928.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:08.257Z,1516708928.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:08.650Z,1516708928.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:08.666Z,1516708928.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:09.054Z,1516708929.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:09.069Z,1516708929.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:09.451Z,1516708929.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:09.473Z,1516708929.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:09.844Z,1516708929.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:09.859Z,1516708929.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:10.236Z,1516708930.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:10.263Z,1516708930.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:10.633Z,1516708930.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:10.667Z,1516708930.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:11.030Z,1516708931.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:11.065Z,1516708931.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:11.448Z,1516708931.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:11.478Z,1516708931.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:11.854Z,1516708931.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:11.869Z,1516708931.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:12.256Z,1516708932.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:12.271Z,1516708932.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:12.633Z,1516708932.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:12.669Z,1516708932.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:13.033Z,1516708933.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:13.071Z,1516708933.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:13.437Z,1516708933.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:13.469Z,1516708933.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:13.834Z,1516708933.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:13.861Z,1516708933.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:14.233Z,1516708934.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:14.273Z,1516708934.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:14.648Z,1516708934.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:14.675Z,1516708934.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:15.068Z,1516708935.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:15.083Z,1516708935.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:15.466Z,1516708935.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:15.481Z,1516708935.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:15.840Z,1516708935.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:15.877Z,1516708935.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:16.240Z,1516708936.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:16.284Z,1516708936.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:16.645Z,1516708936.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:16.685Z,1516708936.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:17.034Z,1516708937.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:17.049Z,1516708937.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:17.455Z,1516708937.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:17.481Z,1516708937.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:17.860Z,1516708937.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:17.886Z,1516708937.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:18.247Z,1516708938.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:18.281Z,1516708938.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:18.638Z,1516708938.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:18.657Z,1516708938.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:19.038Z,1516708939.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:19.065Z,1516708939.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:19.440Z,1516708939.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:19.455Z,1516708939.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:19.844Z,1516708939.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:19.865Z,1516708939.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:20.246Z,1516708940.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:20.261Z,1516708940.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:20.648Z,1516708940.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:20.663Z,1516708940.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:21.047Z,1516708941.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:21.063Z,1516708941.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:21.448Z,1516708941.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:21.463Z,1516708941.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:21.842Z,1516708941.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:21.857Z,1516708941.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:22.241Z,1516708942.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:22.256Z,1516708942.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:22.638Z,1516708942.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:22.657Z,1516708942.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:23.036Z,1516708943.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:23.065Z,1516708943.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:23.455Z,1516708943.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:23.477Z,1516708943.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:23.856Z,1516708943.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:23.877Z,1516708943.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:24.252Z,1516708944.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:24.267Z,1516708944.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:24.632Z,1516708944.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:24.678Z,1516708944.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:25.033Z,1516708945.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:25.070Z,1516708945.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:25.436Z,1516708945.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:25.464Z,1516708945.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:25.833Z,1516708945.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:25.864Z,1516708945.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:26.240Z,1516708946.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:26.269Z,1516708946.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:26.644Z,1516708946.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:26.681Z,1516708946.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:27.065Z,1516708947.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:27.085Z,1516708947.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:27.444Z,1516708947.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:27.473Z,1516708947.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:27.833Z,1516708947.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:27.869Z,1516708947.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:28.234Z,1516708948.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:28.261Z,1516708948.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:28.634Z,1516708948.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:28.649Z,1516708948.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:29.032Z,1516708949.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:29.053Z,1516708949.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:29.452Z,1516708949.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:29.480Z,1516708949.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:29.852Z,1516708949.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:29.879Z,1516708949.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:30.256Z,1516708950.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:30.281Z,1516708950.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:30.644Z,1516708950.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:30.692Z,1516708950.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:31.040Z,1516708951.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:31.055Z,1516708951.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:31.057Z,1516708951.057 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:31.058Z,1516708951.058 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175 2018-01-23T12:02:31.058Z,1516708951.058 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:02:31.078Z,1516708951.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:02:31.436Z,1516708951.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:31.460Z,1516708951.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:31.460Z,1516708951.460 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175 2018-01-23T12:02:31.460Z,1516708951.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:02:31.462Z,1516708951.462 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:31.462Z,1516708951.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 175 2018-01-23T12:02:31.462Z,1516708951.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:02:31.491Z,1516708951.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:02:31.491Z,1516708951.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:02:31.491Z,1516708951.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:02:31.491Z,1516708951.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175 2018-01-23T12:02:31.833Z,1516708951.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:31.847Z,1516708951.847 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:02:31.848Z,1516708951.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:02:31.848Z,1516708951.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:02:31.860Z,1516708951.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:02:31.860Z,1516708951.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175 2018-01-23T12:02:31.860Z,1516708951.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:02:31.860Z,1516708951.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 175 2018-01-23T12:02:32.234Z,1516708952.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:32.247Z,1516708952.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:02:32.248Z,1516708952.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:02:32.248Z,1516708952.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:02:32.249Z,1516708952.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:02:32.249Z,1516708952.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:02:32.249Z,1516708952.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:02:32.644Z,1516708952.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:32.673Z,1516708952.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:02:32.674Z,1516708952.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:33.051Z,1516708953.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:33.066Z,1516708953.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:02:33.067Z,1516708953.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:33.450Z,1516708953.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:33.465Z,1516708953.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:02:33.466Z,1516708953.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:33.836Z,1516708953.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:33.858Z,1516708953.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:02:33.859Z,1516708953.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:34.236Z,1516708954.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:34.262Z,1516708954.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:02:34.267Z,1516708954.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:34.642Z,1516708954.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:34.656Z,1516708954.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:02:34.657Z,1516708954.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:35.036Z,1516708955.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:35.058Z,1516708955.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:02:35.059Z,1516708955.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:35.450Z,1516708955.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:35.465Z,1516708955.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:02:35.466Z,1516708955.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:35.854Z,1516708955.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:35.872Z,1516708955.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:02:35.873Z,1516708955.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:36.254Z,1516708956.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:36.272Z,1516708956.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:02:36.273Z,1516708956.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:36.632Z,1516708956.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:36.664Z,1516708956.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:02:36.665Z,1516708956.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:37.032Z,1516708957.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:37.068Z,1516708957.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:02:37.069Z,1516708957.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:37.444Z,1516708957.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:37.462Z,1516708957.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:02:37.463Z,1516708957.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:37.833Z,1516708957.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:37.864Z,1516708957.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:02:37.865Z,1516708957.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:38.232Z,1516708958.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:38.261Z,1516708958.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:02:38.262Z,1516708958.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:38.655Z,1516708958.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:38.670Z,1516708958.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:02:38.671Z,1516708958.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:39.054Z,1516708959.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:39.069Z,1516708959.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:02:39.070Z,1516708959.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:39.449Z,1516708959.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:39.472Z,1516708959.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:02:39.473Z,1516708959.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:39.832Z,1516708959.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:39.858Z,1516708959.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:02:39.859Z,1516708959.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:40.232Z,1516708960.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:40.265Z,1516708960.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:02:40.266Z,1516708960.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:40.633Z,1516708960.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:40.672Z,1516708960.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:02:40.673Z,1516708960.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:41.032Z,1516708961.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:41.058Z,1516708961.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:02:41.059Z,1516708961.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:41.416Z,1516708961.416 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:02:41.416Z,1516708961.416 [NAL9602] Data Fault, FailCount= 3 2018-01-23T12:02:41.416Z,1516708961.416 [NAL9602](ERROR): Data Fault 2018-01-23T12:02:41.433Z,1516708961.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:41.469Z,1516708961.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:02:41.470Z,1516708961.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:41.505Z,1516708961.505 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:02:41.816Z,1516708961.816 [NAL9602](INFO): Powering down 2018-01-23T12:02:41.833Z,1516708961.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:41.875Z,1516708961.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:02:41.875Z,1516708961.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:42.232Z,1516708962.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:42.259Z,1516708962.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:02:42.260Z,1516708962.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:42.632Z,1516708962.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:42.646Z,1516708962.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:02:42.647Z,1516708962.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:42.688Z,1516708962.688 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:02:42.688Z,1516708962.688 [NAL9602] No Fault, FailCount= 3 2018-01-23T12:02:43.032Z,1516708963.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:43.046Z,1516708963.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:02:43.047Z,1516708963.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:43.436Z,1516708963.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:43.451Z,1516708963.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:02:43.452Z,1516708963.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:43.844Z,1516708963.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:43.858Z,1516708963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:02:43.859Z,1516708963.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:44.232Z,1516708964.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:44.247Z,1516708964.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:02:44.248Z,1516708964.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:44.644Z,1516708964.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:44.659Z,1516708964.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:02:44.660Z,1516708964.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:45.041Z,1516708965.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:45.055Z,1516708965.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:02:45.056Z,1516708965.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:45.441Z,1516708965.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:45.455Z,1516708965.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:02:45.456Z,1516708965.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:45.841Z,1516708965.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:45.855Z,1516708965.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:02:45.856Z,1516708965.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:46.236Z,1516708966.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:46.250Z,1516708966.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:02:46.251Z,1516708966.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:46.637Z,1516708966.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:46.685Z,1516708966.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:02:46.686Z,1516708966.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:47.041Z,1516708967.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:47.056Z,1516708967.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:02:47.056Z,1516708967.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:47.437Z,1516708967.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:47.462Z,1516708967.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:02:47.463Z,1516708967.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:47.839Z,1516708967.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:47.854Z,1516708967.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:02:47.855Z,1516708967.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:48.237Z,1516708968.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:48.260Z,1516708968.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:02:48.261Z,1516708968.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:48.638Z,1516708968.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:48.652Z,1516708968.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:02:48.653Z,1516708968.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:49.037Z,1516708969.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:49.052Z,1516708969.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:02:49.052Z,1516708969.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:49.439Z,1516708969.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:49.453Z,1516708969.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:02:49.454Z,1516708969.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:49.837Z,1516708969.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:49.860Z,1516708969.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:02:49.861Z,1516708969.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:50.235Z,1516708970.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:50.249Z,1516708970.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:02:50.250Z,1516708970.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:50.638Z,1516708970.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:50.657Z,1516708970.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:02:50.657Z,1516708970.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:51.041Z,1516708971.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:51.055Z,1516708971.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:02:51.056Z,1516708971.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:51.438Z,1516708971.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:51.463Z,1516708971.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:51.838Z,1516708971.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:51.861Z,1516708971.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:52.239Z,1516708972.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:52.254Z,1516708972.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:52.639Z,1516708972.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:52.686Z,1516708972.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:53.042Z,1516708973.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:53.057Z,1516708973.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:53.440Z,1516708973.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:53.455Z,1516708973.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:53.839Z,1516708973.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:53.854Z,1516708973.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:54.245Z,1516708974.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:54.261Z,1516708974.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:54.645Z,1516708974.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:54.661Z,1516708974.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:55.037Z,1516708975.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:55.052Z,1516708975.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:55.438Z,1516708975.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:55.458Z,1516708975.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:55.846Z,1516708975.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:55.861Z,1516708975.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:56.238Z,1516708976.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:56.252Z,1516708976.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:56.640Z,1516708976.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:56.655Z,1516708976.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:57.040Z,1516708977.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:57.055Z,1516708977.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:57.444Z,1516708977.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:57.459Z,1516708977.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:57.846Z,1516708977.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:57.869Z,1516708977.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:58.244Z,1516708978.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:58.259Z,1516708978.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:58.643Z,1516708978.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:58.666Z,1516708978.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:59.046Z,1516708979.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:59.061Z,1516708979.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:59.445Z,1516708979.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:59.465Z,1516708979.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:02:59.841Z,1516708979.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:02:59.856Z,1516708979.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:00.240Z,1516708980.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:00.259Z,1516708980.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:00.641Z,1516708980.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:00.668Z,1516708980.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:01.034Z,1516708981.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:01.060Z,1516708981.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:01.433Z,1516708981.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:01.465Z,1516708981.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:01.832Z,1516708981.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:01.870Z,1516708981.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:02.234Z,1516708982.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:02.261Z,1516708982.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:02.649Z,1516708982.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:02.669Z,1516708982.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:02.672Z,1516708982.672 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:03:02.672Z,1516708982.672 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:03:02.672Z,1516708982.672 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:03:02.672Z,1516708982.672 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:03:03.040Z,1516708983.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:03.073Z,1516708983.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:03.080Z,1516708983.080 [Default:CheckIn:D] Stopped 2018-01-23T12:03:03.080Z,1516708983.080 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:03:06.134Z,1516708986.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:06.158Z,1516708986.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:06.161Z,1516708986.161 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 525.183659 min 2018-01-23T12:03:06.161Z,1516708986.161 [Default:CheckIn:E] Stopped 2018-01-23T12:03:06.161Z,1516708986.161 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:03:06.161Z,1516708986.161 [Default:CheckIn] Stopped 2018-01-23T12:03:06.162Z,1516708986.162 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:03:06.162Z,1516708986.162 [Default:CheckIn](INFO): Running loop #52 2018-01-23T12:03:06.162Z,1516708986.162 [Default:CheckIn] Running Loop=52 2018-01-23T12:03:06.162Z,1516708986.162 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:03:06.162Z,1516708986.162 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:03:06.283Z,1516708986.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:06.310Z,1516708986.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:06.614Z,1516708986.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:06.637Z,1516708986.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:07.013Z,1516708987.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:07.038Z,1516708987.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:07.408Z,1516708987.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:07.428Z,1516708987.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:07.803Z,1516708987.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:07.841Z,1516708987.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:08.214Z,1516708988.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:08.230Z,1516708988.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:08.598Z,1516708988.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:08.641Z,1516708988.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:09.012Z,1516708989.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:09.035Z,1516708989.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:09.400Z,1516708989.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:09.436Z,1516708989.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:09.801Z,1516708989.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:09.833Z,1516708989.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:10.204Z,1516708990.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:10.249Z,1516708990.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:10.604Z,1516708990.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:10.634Z,1516708990.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:10.998Z,1516708990.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:11.037Z,1516708991.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:11.401Z,1516708991.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:11.430Z,1516708991.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:11.800Z,1516708991.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:11.834Z,1516708991.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:12.181Z,1516708992.181 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:03:12.199Z,1516708992.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:12.232Z,1516708992.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:12.601Z,1516708992.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:12.639Z,1516708992.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:13.000Z,1516708993.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:13.037Z,1516708993.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:13.400Z,1516708993.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:13.431Z,1516708993.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:13.809Z,1516708993.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:13.844Z,1516708993.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:14.200Z,1516708994.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:14.244Z,1516708994.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:14.598Z,1516708994.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:14.617Z,1516708994.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:15.000Z,1516708995.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:15.021Z,1516708995.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:15.407Z,1516708995.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:15.422Z,1516708995.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:15.806Z,1516708995.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:15.824Z,1516708995.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:16.209Z,1516708996.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:16.227Z,1516708996.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:16.605Z,1516708996.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:16.633Z,1516708996.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:17.004Z,1516708997.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:17.022Z,1516708997.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:17.406Z,1516708997.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:17.429Z,1516708997.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:17.806Z,1516708997.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:17.844Z,1516708997.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:18.204Z,1516708998.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:18.222Z,1516708998.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:18.605Z,1516708998.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:18.633Z,1516708998.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:19.000Z,1516708999.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:19.030Z,1516708999.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:19.400Z,1516708999.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:19.430Z,1516708999.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:19.800Z,1516708999.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:19.833Z,1516708999.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:20.200Z,1516709000.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:20.236Z,1516709000.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:20.600Z,1516709000.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:20.634Z,1516709000.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:21.004Z,1516709001.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:21.034Z,1516709001.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:21.399Z,1516709001.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:21.432Z,1516709001.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:21.803Z,1516709001.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:21.830Z,1516709001.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:22.201Z,1516709002.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:22.226Z,1516709002.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:22.629Z,1516709002.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:22.643Z,1516709002.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:22.984Z,1516709002.984 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:03:23.001Z,1516709003.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:23.049Z,1516709003.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:23.405Z,1516709003.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:23.431Z,1516709003.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:23.818Z,1516709003.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:23.858Z,1516709003.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:24.211Z,1516709004.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:24.249Z,1516709004.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:24.624Z,1516709004.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:24.639Z,1516709004.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:25.001Z,1516709005.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:25.040Z,1516709005.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:25.406Z,1516709005.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:25.441Z,1516709005.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:25.801Z,1516709005.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:25.841Z,1516709005.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:26.212Z,1516709006.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:26.246Z,1516709006.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:26.612Z,1516709006.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:26.639Z,1516709006.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:27.012Z,1516709007.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:27.041Z,1516709007.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:27.400Z,1516709007.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:27.442Z,1516709007.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:27.801Z,1516709007.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:27.832Z,1516709007.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:28.201Z,1516709008.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:28.217Z,1516709008.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:28.601Z,1516709008.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:28.615Z,1516709008.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:29.019Z,1516709009.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:29.052Z,1516709009.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:29.423Z,1516709009.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:29.453Z,1516709009.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:29.819Z,1516709009.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:29.845Z,1516709009.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:30.200Z,1516709010.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:30.227Z,1516709010.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:30.610Z,1516709010.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:30.625Z,1516709010.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:31.008Z,1516709011.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:31.027Z,1516709011.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:31.406Z,1516709011.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:31.429Z,1516709011.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:31.809Z,1516709011.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:31.824Z,1516709011.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:32.227Z,1516709012.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:32.264Z,1516709012.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:32.619Z,1516709012.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:32.634Z,1516709012.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:33.018Z,1516709013.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:33.033Z,1516709013.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:33.410Z,1516709013.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:33.425Z,1516709013.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:33.804Z,1516709013.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:33.829Z,1516709013.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:34.208Z,1516709014.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:34.228Z,1516709014.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:34.610Z,1516709014.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:34.632Z,1516709014.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:35.015Z,1516709015.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:35.046Z,1516709015.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:35.423Z,1516709015.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:35.438Z,1516709015.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:35.820Z,1516709015.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:35.835Z,1516709015.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:36.211Z,1516709016.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:36.226Z,1516709016.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:36.603Z,1516709016.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:36.637Z,1516709016.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:37.011Z,1516709017.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:37.026Z,1516709017.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:37.409Z,1516709017.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:37.429Z,1516709017.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:37.804Z,1516709017.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:37.837Z,1516709017.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:38.212Z,1516709018.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:38.246Z,1516709018.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:38.612Z,1516709018.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:38.644Z,1516709018.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:39.020Z,1516709019.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:39.045Z,1516709019.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:39.413Z,1516709019.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:39.452Z,1516709019.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:39.808Z,1516709019.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:39.824Z,1516709019.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:40.209Z,1516709020.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:40.224Z,1516709020.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:40.609Z,1516709020.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:40.623Z,1516709020.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:41.019Z,1516709021.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:41.043Z,1516709021.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:41.415Z,1516709021.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:41.430Z,1516709021.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:41.816Z,1516709021.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:41.836Z,1516709021.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:42.207Z,1516709022.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:42.227Z,1516709022.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:42.609Z,1516709022.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:42.625Z,1516709022.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:43.009Z,1516709023.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:43.024Z,1516709023.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:43.404Z,1516709023.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:43.441Z,1516709023.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:43.812Z,1516709023.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:43.829Z,1516709023.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:44.221Z,1516709024.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:44.237Z,1516709024.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:44.619Z,1516709024.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:44.641Z,1516709024.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:45.019Z,1516709025.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:45.034Z,1516709025.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:45.410Z,1516709025.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:45.433Z,1516709025.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:45.804Z,1516709025.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:45.827Z,1516709025.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:46.205Z,1516709026.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:46.228Z,1516709026.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:46.610Z,1516709026.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:46.629Z,1516709026.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:47.019Z,1516709027.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:47.034Z,1516709027.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:47.419Z,1516709027.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:47.442Z,1516709027.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:47.820Z,1516709027.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:47.834Z,1516709027.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:48.201Z,1516709028.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:48.232Z,1516709028.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:48.601Z,1516709028.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:48.632Z,1516709028.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:49.012Z,1516709029.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:49.027Z,1516709029.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:49.402Z,1516709029.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:49.428Z,1516709029.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:49.801Z,1516709029.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:49.833Z,1516709029.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:50.220Z,1516709030.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:50.235Z,1516709030.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:50.616Z,1516709030.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:50.643Z,1516709030.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:51.020Z,1516709031.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:51.035Z,1516709031.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:51.404Z,1516709031.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:51.432Z,1516709031.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:51.817Z,1516709031.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:51.837Z,1516709031.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:52.202Z,1516709032.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:52.236Z,1516709032.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:52.601Z,1516709032.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:52.640Z,1516709032.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:53.016Z,1516709033.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:53.046Z,1516709033.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:53.422Z,1516709033.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:53.438Z,1516709033.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:53.820Z,1516709033.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:53.840Z,1516709033.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:54.198Z,1516709034.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:54.226Z,1516709034.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:54.604Z,1516709034.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:54.630Z,1516709034.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:55.001Z,1516709035.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:55.034Z,1516709035.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:55.402Z,1516709035.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:55.432Z,1516709035.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:55.801Z,1516709035.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:55.836Z,1516709035.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:56.221Z,1516709036.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:56.236Z,1516709036.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:56.619Z,1516709036.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:56.634Z,1516709036.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:57.015Z,1516709037.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:57.037Z,1516709037.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:57.401Z,1516709037.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:57.434Z,1516709037.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:57.801Z,1516709037.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:57.833Z,1516709037.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:58.200Z,1516709038.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:58.233Z,1516709038.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:58.600Z,1516709038.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:58.638Z,1516709038.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:59.015Z,1516709039.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:59.038Z,1516709039.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:59.420Z,1516709039.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:59.450Z,1516709039.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:03:59.820Z,1516709039.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:03:59.840Z,1516709039.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:00.198Z,1516709040.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:00.222Z,1516709040.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:00.604Z,1516709040.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:00.636Z,1516709040.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:01.001Z,1516709041.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:01.037Z,1516709041.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:01.403Z,1516709041.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:01.434Z,1516709041.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:01.805Z,1516709041.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:01.836Z,1516709041.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:02.211Z,1516709042.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:02.246Z,1516709042.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:02.611Z,1516709042.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:02.642Z,1516709042.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:03.020Z,1516709043.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:03.045Z,1516709043.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:03.414Z,1516709043.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:03.445Z,1516709043.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:06.519Z,1516709046.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:06.550Z,1516709046.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:06.655Z,1516709046.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:06.700Z,1516709046.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:07.004Z,1516709047.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:07.019Z,1516709047.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:07.416Z,1516709047.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:07.430Z,1516709047.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:07.806Z,1516709047.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:07.829Z,1516709047.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:08.205Z,1516709048.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:08.220Z,1516709048.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:08.602Z,1516709048.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:08.616Z,1516709048.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:08.997Z,1516709048.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:09.029Z,1516709049.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:09.405Z,1516709049.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:09.420Z,1516709049.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:09.802Z,1516709049.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:09.816Z,1516709049.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:10.206Z,1516709050.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:10.229Z,1516709050.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:10.610Z,1516709050.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:10.625Z,1516709050.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:11.011Z,1516709051.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:11.026Z,1516709051.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:11.405Z,1516709051.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:11.420Z,1516709051.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:11.801Z,1516709051.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:11.816Z,1516709051.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:12.203Z,1516709052.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:12.218Z,1516709052.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:12.596Z,1516709052.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:12.629Z,1516709052.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:13.015Z,1516709053.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:13.037Z,1516709053.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:13.414Z,1516709053.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:13.441Z,1516709053.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:13.816Z,1516709053.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:13.831Z,1516709053.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:14.192Z,1516709054.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:14.225Z,1516709054.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:14.593Z,1516709054.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:14.637Z,1516709054.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:14.991Z,1516709054.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:15.029Z,1516709055.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:15.398Z,1516709055.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:15.426Z,1516709055.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:15.793Z,1516709055.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:15.834Z,1516709055.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:16.208Z,1516709056.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:16.245Z,1516709056.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:16.617Z,1516709056.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:16.632Z,1516709056.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:17.012Z,1516709057.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:17.052Z,1516709057.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:17.393Z,1516709057.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:17.410Z,1516709057.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:17.793Z,1516709057.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:17.814Z,1516709057.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:18.202Z,1516709058.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:18.217Z,1516709058.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:18.595Z,1516709058.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:18.610Z,1516709058.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:19.016Z,1516709059.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:19.049Z,1516709059.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:19.419Z,1516709059.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:19.452Z,1516709059.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:19.813Z,1516709059.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:19.845Z,1516709059.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:20.204Z,1516709060.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:20.241Z,1516709060.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:20.597Z,1516709060.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:20.613Z,1516709060.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:20.994Z,1516709060.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:21.018Z,1516709061.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:21.400Z,1516709061.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:21.421Z,1516709061.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:21.800Z,1516709061.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:21.815Z,1516709061.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:22.203Z,1516709062.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:22.225Z,1516709062.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:22.612Z,1516709062.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:22.633Z,1516709062.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:23.011Z,1516709063.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:23.026Z,1516709063.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:23.400Z,1516709063.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:23.415Z,1516709063.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:23.796Z,1516709063.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:23.823Z,1516709063.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:24.202Z,1516709064.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:24.224Z,1516709064.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:24.605Z,1516709064.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:24.625Z,1516709064.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:25.011Z,1516709065.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:25.026Z,1516709065.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:25.415Z,1516709065.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:25.436Z,1516709065.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:25.815Z,1516709065.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:25.830Z,1516709065.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:25.859Z,1516709065.859 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:04:26.192Z,1516709066.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:26.225Z,1516709066.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:26.592Z,1516709066.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:26.629Z,1516709066.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:26.990Z,1516709066.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:27.026Z,1516709067.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:27.393Z,1516709067.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:27.425Z,1516709067.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:27.792Z,1516709067.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:27.829Z,1516709067.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:28.208Z,1516709068.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:28.231Z,1516709068.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:28.614Z,1516709068.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:28.636Z,1516709068.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:29.016Z,1516709069.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:29.031Z,1516709069.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:29.392Z,1516709069.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:29.419Z,1516709069.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:29.792Z,1516709069.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:29.825Z,1516709069.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:30.193Z,1516709070.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:30.233Z,1516709070.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:30.608Z,1516709070.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:30.627Z,1516709070.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:31.008Z,1516709071.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:31.031Z,1516709071.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:31.416Z,1516709071.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:31.430Z,1516709071.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:31.812Z,1516709071.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:31.827Z,1516709071.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:32.196Z,1516709072.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:32.229Z,1516709072.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:32.592Z,1516709072.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:32.631Z,1516709072.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:32.990Z,1516709072.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:33.005Z,1516709073.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:33.393Z,1516709073.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:33.408Z,1516709073.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:33.792Z,1516709073.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:33.812Z,1516709073.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:34.207Z,1516709074.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:34.239Z,1516709074.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:34.615Z,1516709074.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:34.640Z,1516709074.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:35.014Z,1516709075.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:35.044Z,1516709075.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:35.400Z,1516709075.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:35.421Z,1516709075.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:35.798Z,1516709075.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:35.817Z,1516709075.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:36.201Z,1516709076.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:36.216Z,1516709076.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:36.598Z,1516709076.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:36.613Z,1516709076.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:37.007Z,1516709077.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:37.022Z,1516709077.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:37.407Z,1516709077.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:37.422Z,1516709077.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:37.804Z,1516709077.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:37.818Z,1516709077.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:38.198Z,1516709078.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:38.221Z,1516709078.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:38.600Z,1516709078.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:38.627Z,1516709078.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:38.996Z,1516709078.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:39.021Z,1516709079.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:39.397Z,1516709079.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:39.419Z,1516709079.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:39.796Z,1516709079.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:39.826Z,1516709079.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:40.210Z,1516709080.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:40.230Z,1516709080.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:40.613Z,1516709080.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:40.632Z,1516709080.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:41.012Z,1516709081.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:41.033Z,1516709081.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:41.397Z,1516709081.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:41.423Z,1516709081.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:41.792Z,1516709081.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:41.825Z,1516709081.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:42.197Z,1516709082.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:42.231Z,1516709082.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:42.593Z,1516709082.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:42.629Z,1516709082.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:43.003Z,1516709083.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:43.039Z,1516709083.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:43.415Z,1516709083.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:43.436Z,1516709083.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:43.804Z,1516709083.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:43.845Z,1516709083.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:44.198Z,1516709084.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:44.233Z,1516709084.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:44.593Z,1516709084.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:44.629Z,1516709084.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:45.004Z,1516709085.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:45.035Z,1516709085.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:45.428Z,1516709085.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:45.449Z,1516709085.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:45.816Z,1516709085.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:45.849Z,1516709085.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:46.194Z,1516709086.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:46.209Z,1516709086.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:46.604Z,1516709086.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:46.621Z,1516709086.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:46.000Z,1516709087.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:47.020Z,1516709087.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:47.402Z,1516709087.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:47.417Z,1516709087.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:47.798Z,1516709087.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:47.821Z,1516709087.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:48.203Z,1516709088.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:48.219Z,1516709088.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:48.607Z,1516709088.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:48.622Z,1516709088.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:49.003Z,1516709089.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:49.018Z,1516709089.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:49.400Z,1516709089.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:49.427Z,1516709089.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:49.801Z,1516709089.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:49.816Z,1516709089.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:50.206Z,1516709090.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:50.221Z,1516709090.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:50.602Z,1516709090.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:50.617Z,1516709090.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:51.006Z,1516709091.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:51.021Z,1516709091.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:51.407Z,1516709091.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:51.422Z,1516709091.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:51.808Z,1516709091.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:51.829Z,1516709091.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:52.200Z,1516709092.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:52.220Z,1516709092.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:52.596Z,1516709092.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:52.621Z,1516709092.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:53.012Z,1516709093.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:53.027Z,1516709093.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:53.411Z,1516709093.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:53.426Z,1516709093.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:53.812Z,1516709093.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:53.827Z,1516709093.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:54.211Z,1516709094.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:54.226Z,1516709094.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:54.597Z,1516709094.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:54.620Z,1516709094.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:55.010Z,1516709095.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:55.037Z,1516709095.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:55.420Z,1516709095.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:55.435Z,1516709095.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:55.817Z,1516709095.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:55.832Z,1516709095.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:56.194Z,1516709096.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:56.229Z,1516709096.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:56.597Z,1516709096.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:56.627Z,1516709096.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:57.008Z,1516709097.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:57.040Z,1516709097.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:57.412Z,1516709097.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:57.440Z,1516709097.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:57.812Z,1516709097.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:57.834Z,1516709097.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:58.193Z,1516709098.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:58.235Z,1516709098.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:58.591Z,1516709098.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:58.632Z,1516709098.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:59.008Z,1516709099.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:59.040Z,1516709099.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:59.420Z,1516709099.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:59.436Z,1516709099.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:04:59.803Z,1516709099.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:04:59.842Z,1516709099.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:00.195Z,1516709100.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:00.230Z,1516709100.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:00.597Z,1516709100.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:00.628Z,1516709100.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:01.004Z,1516709101.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:01.039Z,1516709101.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:01.415Z,1516709101.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:01.444Z,1516709101.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:01.808Z,1516709101.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:01.843Z,1516709101.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:02.198Z,1516709102.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:02.213Z,1516709102.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:02.597Z,1516709102.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:02.633Z,1516709102.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:03.007Z,1516709103.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:03.035Z,1516709103.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:03.411Z,1516709103.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:03.426Z,1516709103.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:03.815Z,1516709103.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:03.850Z,1516709103.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:06.900Z,1516709106.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:06.916Z,1516709106.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:07.025Z,1516709107.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:07.061Z,1516709107.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:07.379Z,1516709107.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:07.402Z,1516709107.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:07.779Z,1516709107.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:07.805Z,1516709107.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:08.171Z,1516709108.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:08.198Z,1516709108.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:08.565Z,1516709108.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:08.585Z,1516709108.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:08.961Z,1516709108.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:08.976Z,1516709108.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:09.363Z,1516709109.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:09.378Z,1516709109.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:09.762Z,1516709109.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:09.777Z,1516709109.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:10.175Z,1516709110.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:10.202Z,1516709110.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:10.575Z,1516709110.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:10.590Z,1516709110.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:10.979Z,1516709110.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:10.994Z,1516709110.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:11.366Z,1516709111.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:11.381Z,1516709111.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:11.766Z,1516709111.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:11.788Z,1516709111.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:12.168Z,1516709112.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:12.183Z,1516709112.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:12.567Z,1516709112.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:12.582Z,1516709112.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:12.960Z,1516709112.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:12.981Z,1516709112.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:13.372Z,1516709113.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:13.387Z,1516709113.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:13.770Z,1516709113.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:13.792Z,1516709113.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:14.168Z,1516709114.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:14.191Z,1516709114.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:14.565Z,1516709114.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:14.580Z,1516709114.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:14.967Z,1516709114.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:14.988Z,1516709114.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:15.371Z,1516709115.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:15.386Z,1516709115.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:15.766Z,1516709115.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:15.789Z,1516709115.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:16.176Z,1516709116.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:16.191Z,1516709116.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:16.575Z,1516709116.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:16.591Z,1516709116.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:16.975Z,1516709116.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:16.990Z,1516709116.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:17.367Z,1516709117.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:17.388Z,1516709117.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:17.770Z,1516709117.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:17.785Z,1516709117.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:18.164Z,1516709118.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:18.184Z,1516709118.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:18.575Z,1516709118.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:18.591Z,1516709118.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:18.964Z,1516709118.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:18.985Z,1516709118.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:19.372Z,1516709119.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:19.391Z,1516709119.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:19.776Z,1516709119.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:19.799Z,1516709119.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:20.172Z,1516709120.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:20.203Z,1516709120.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:20.561Z,1516709120.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:20.597Z,1516709120.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:20.957Z,1516709120.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:20.989Z,1516709120.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:21.358Z,1516709121.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:21.374Z,1516709121.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:21.757Z,1516709121.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:21.777Z,1516709121.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:22.180Z,1516709122.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:22.207Z,1516709122.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:22.579Z,1516709122.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:22.613Z,1516709122.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:22.979Z,1516709122.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:23.009Z,1516709123.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:23.365Z,1516709123.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:23.381Z,1516709123.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:23.761Z,1516709123.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:23.776Z,1516709123.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:24.165Z,1516709124.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:24.180Z,1516709124.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:24.564Z,1516709124.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:24.591Z,1516709124.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:24.965Z,1516709124.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:24.980Z,1516709124.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:25.367Z,1516709125.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:25.383Z,1516709125.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:25.771Z,1516709125.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:25.787Z,1516709125.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:26.168Z,1516709126.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:26.183Z,1516709126.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:26.560Z,1516709126.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:26.593Z,1516709126.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:26.970Z,1516709126.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:26.986Z,1516709126.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:27.362Z,1516709127.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:27.389Z,1516709127.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:27.770Z,1516709127.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:27.786Z,1516709127.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:28.176Z,1516709128.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:28.191Z,1516709128.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:28.580Z,1516709128.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:28.594Z,1516709128.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:28.976Z,1516709128.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:28.993Z,1516709128.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:29.368Z,1516709129.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:29.383Z,1516709129.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:29.760Z,1516709129.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:29.797Z,1516709129.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:30.171Z,1516709130.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:30.186Z,1516709130.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:30.567Z,1516709130.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:30.588Z,1516709130.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:30.958Z,1516709130.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:30.998Z,1516709130.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:31.385Z,1516709131.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:31.405Z,1516709131.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:31.781Z,1516709131.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:31.797Z,1516709131.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:32.174Z,1516709132.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:32.194Z,1516709132.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:32.200Z,1516709132.200 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:32.200Z,1516709132.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176 2018-01-23T12:05:32.200Z,1516709132.200 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:05:32.224Z,1516709132.224 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:05:32.558Z,1516709132.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:32.596Z,1516709132.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:32.596Z,1516709132.596 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176 2018-01-23T12:05:32.596Z,1516709132.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:05:32.598Z,1516709132.598 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:32.598Z,1516709132.598 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 176 2018-01-23T12:05:32.598Z,1516709132.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:05:32.610Z,1516709132.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:05:32.611Z,1516709132.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:05:32.611Z,1516709132.611 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:05:32.611Z,1516709132.611 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176 2018-01-23T12:05:32.958Z,1516709132.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:32.999Z,1516709132.999 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:05:32.999Z,1516709132.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:05:32.000Z,1516709133.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:05:33.011Z,1516709133.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:05:33.011Z,1516709133.011 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176 2018-01-23T12:05:33.012Z,1516709133.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:05:33.012Z,1516709133.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 176 2018-01-23T12:05:33.358Z,1516709133.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:33.398Z,1516709133.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:05:33.398Z,1516709133.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:05:33.398Z,1516709133.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:05:33.399Z,1516709133.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:05:33.399Z,1516709133.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:05:33.400Z,1516709133.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:05:33.757Z,1516709133.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:33.795Z,1516709133.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:05:33.796Z,1516709133.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:34.172Z,1516709134.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:34.212Z,1516709134.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:05:34.213Z,1516709134.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:34.586Z,1516709134.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:34.608Z,1516709134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:05:34.609Z,1516709134.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:34.967Z,1516709134.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:34.997Z,1516709134.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:05:34.998Z,1516709134.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:35.357Z,1516709135.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:35.393Z,1516709135.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:05:35.394Z,1516709135.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:35.757Z,1516709135.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:35.796Z,1516709135.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:05:35.797Z,1516709135.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:36.157Z,1516709136.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:36.176Z,1516709136.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:05:36.177Z,1516709136.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:36.562Z,1516709136.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:36.577Z,1516709136.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:05:36.577Z,1516709136.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:36.961Z,1516709136.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:36.976Z,1516709136.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:05:36.977Z,1516709136.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:37.379Z,1516709137.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:37.415Z,1516709137.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:05:37.416Z,1516709137.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:37.771Z,1516709137.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:37.785Z,1516709137.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:05:37.786Z,1516709137.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:38.171Z,1516709138.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:38.192Z,1516709138.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:05:38.193Z,1516709138.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:38.568Z,1516709138.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:38.583Z,1516709138.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:05:38.584Z,1516709138.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:38.966Z,1516709138.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:38.981Z,1516709138.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:05:38.981Z,1516709138.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:39.364Z,1516709139.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:39.383Z,1516709139.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:05:39.384Z,1516709139.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:39.761Z,1516709139.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:39.788Z,1516709139.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:05:39.788Z,1516709139.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:40.175Z,1516709140.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:40.189Z,1516709140.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:05:40.190Z,1516709140.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:40.574Z,1516709140.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:40.589Z,1516709140.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:05:40.590Z,1516709140.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:40.975Z,1516709140.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:40.989Z,1516709140.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:05:40.990Z,1516709140.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:41.366Z,1516709141.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:41.381Z,1516709141.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:05:41.382Z,1516709141.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:41.766Z,1516709141.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:41.780Z,1516709141.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:05:41.781Z,1516709141.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:42.161Z,1516709142.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:42.180Z,1516709142.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:05:42.180Z,1516709142.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:42.567Z,1516709142.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:42.581Z,1516709142.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:05:42.582Z,1516709142.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:42.965Z,1516709142.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:42.984Z,1516709142.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:05:42.985Z,1516709142.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:43.374Z,1516709143.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:43.389Z,1516709143.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:05:43.390Z,1516709143.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:43.779Z,1516709143.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:43.800Z,1516709143.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:05:43.801Z,1516709143.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:44.179Z,1516709144.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:44.193Z,1516709144.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:05:44.195Z,1516709144.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:44.557Z,1516709144.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:44.592Z,1516709144.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:05:44.593Z,1516709144.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:44.957Z,1516709144.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:44.990Z,1516709144.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:05:44.991Z,1516709144.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:45.371Z,1516709145.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:45.385Z,1516709145.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:05:45.386Z,1516709145.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:45.757Z,1516709145.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:45.793Z,1516709145.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:05:45.794Z,1516709145.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:46.180Z,1516709146.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:46.194Z,1516709146.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:05:46.195Z,1516709146.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:46.582Z,1516709146.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:46.604Z,1516709146.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:05:46.605Z,1516709146.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:46.976Z,1516709146.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:46.990Z,1516709146.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:05:46.991Z,1516709146.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:47.357Z,1516709147.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:47.393Z,1516709147.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:05:47.394Z,1516709147.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:47.757Z,1516709147.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:47.792Z,1516709147.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:05:47.793Z,1516709147.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:48.157Z,1516709148.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:48.192Z,1516709148.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:05:48.193Z,1516709148.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:48.562Z,1516709148.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:48.588Z,1516709148.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:05:48.589Z,1516709148.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:48.961Z,1516709148.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:48.987Z,1516709148.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:05:48.988Z,1516709148.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:49.372Z,1516709149.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:49.393Z,1516709149.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:05:49.394Z,1516709149.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:49.780Z,1516709149.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:49.800Z,1516709149.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:05:49.801Z,1516709149.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:50.180Z,1516709150.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:50.194Z,1516709150.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:05:50.195Z,1516709150.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:50.557Z,1516709150.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:50.583Z,1516709150.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:05:50.584Z,1516709150.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:50.957Z,1516709150.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:50.996Z,1516709150.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:05:50.997Z,1516709150.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:51.358Z,1516709151.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:51.389Z,1516709151.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:05:51.389Z,1516709151.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:51.757Z,1516709151.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:51.789Z,1516709151.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:05:51.790Z,1516709151.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:52.177Z,1516709152.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:52.192Z,1516709152.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:05:52.193Z,1516709152.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:52.577Z,1516709152.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:52.598Z,1516709152.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:52.971Z,1516709152.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:52.994Z,1516709152.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:53.357Z,1516709153.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:53.390Z,1516709153.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:53.761Z,1516709153.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:53.788Z,1516709153.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:54.157Z,1516709154.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:54.189Z,1516709154.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:54.562Z,1516709154.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:54.594Z,1516709154.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:54.961Z,1516709154.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:54.988Z,1516709154.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:55.367Z,1516709155.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:55.394Z,1516709155.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:55.771Z,1516709155.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:55.807Z,1516709155.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:56.171Z,1516709156.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:56.198Z,1516709156.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:56.565Z,1516709156.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:56.601Z,1516709156.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:56.961Z,1516709156.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:56.975Z,1516709156.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:57.366Z,1516709157.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:57.397Z,1516709157.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:57.762Z,1516709157.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:57.778Z,1516709157.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:58.175Z,1516709158.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:58.210Z,1516709158.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:58.579Z,1516709158.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:58.604Z,1516709158.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:58.979Z,1516709158.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:59.004Z,1516709159.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:59.366Z,1516709159.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:59.380Z,1516709159.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:05:59.762Z,1516709159.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:05:59.784Z,1516709159.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:00.205Z,1516709160.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:00.220Z,1516709160.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:00.573Z,1516709160.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:00.588Z,1516709160.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:00.968Z,1516709160.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:01.003Z,1516709161.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:01.383Z,1516709161.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:01.402Z,1516709161.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:01.786Z,1516709161.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:01.850Z,1516709161.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:02.182Z,1516709162.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:02.206Z,1516709162.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:02.588Z,1516709162.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:02.609Z,1516709162.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:02.959Z,1516709162.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:03.033Z,1516709163.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:03.391Z,1516709163.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:03.407Z,1516709163.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:03.757Z,1516709163.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:03.793Z,1516709163.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:04.185Z,1516709164.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:04.216Z,1516709164.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:10.895Z,1516709170.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:10.927Z,1516709170.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:11.060Z,1516709171.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:11.093Z,1516709171.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:11.420Z,1516709171.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:11.460Z,1516709171.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:11.839Z,1516709171.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:11.883Z,1516709171.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:12.235Z,1516709172.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:12.267Z,1516709172.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:12.611Z,1516709172.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:12.668Z,1516709172.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:13.010Z,1516709173.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:13.025Z,1516709173.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:13.448Z,1516709173.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:13.471Z,1516709173.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:13.821Z,1516709173.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:13.860Z,1516709173.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:14.229Z,1516709174.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:14.265Z,1516709174.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:14.622Z,1516709174.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:14.674Z,1516709174.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:15.026Z,1516709175.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:15.075Z,1516709175.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:15.419Z,1516709175.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:15.465Z,1516709175.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:15.823Z,1516709175.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:15.871Z,1516709175.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:16.237Z,1516709176.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:16.336Z,1516709176.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:16.629Z,1516709176.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:16.665Z,1516709176.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:17.033Z,1516709177.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:17.066Z,1516709177.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:17.420Z,1516709177.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:17.440Z,1516709177.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:17.815Z,1516709177.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:17.835Z,1516709177.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:18.205Z,1516709178.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:18.242Z,1516709178.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:18.605Z,1516709178.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:18.636Z,1516709178.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:19.002Z,1516709179.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:19.060Z,1516709179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:19.430Z,1516709179.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:19.445Z,1516709179.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:19.830Z,1516709179.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:19.845Z,1516709179.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:20.224Z,1516709180.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:20.240Z,1516709180.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:20.604Z,1516709180.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:20.631Z,1516709180.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:21.004Z,1516709181.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:21.034Z,1516709181.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:21.421Z,1516709181.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:21.437Z,1516709181.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:21.804Z,1516709181.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:21.830Z,1516709181.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:22.222Z,1516709182.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:22.246Z,1516709182.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:22.627Z,1516709182.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:22.642Z,1516709182.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:23.020Z,1516709183.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:23.041Z,1516709183.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:23.404Z,1516709183.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:23.438Z,1516709183.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:23.808Z,1516709183.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:23.835Z,1516709183.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:24.204Z,1516709184.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:24.237Z,1516709184.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:24.605Z,1516709184.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:24.633Z,1516709184.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:25.004Z,1516709185.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:25.030Z,1516709185.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:25.422Z,1516709185.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:25.444Z,1516709185.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:25.832Z,1516709185.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:25.847Z,1516709185.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:26.220Z,1516709186.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:26.241Z,1516709186.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:26.604Z,1516709186.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:26.630Z,1516709186.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:27.004Z,1516709187.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:27.040Z,1516709187.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:27.409Z,1516709187.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:27.436Z,1516709187.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:27.804Z,1516709187.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:27.829Z,1516709187.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:28.222Z,1516709188.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:28.249Z,1516709188.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:28.631Z,1516709188.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:28.646Z,1516709188.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:29.023Z,1516709189.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:29.045Z,1516709189.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:29.404Z,1516709189.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:29.432Z,1516709189.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:29.805Z,1516709189.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:29.831Z,1516709189.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:30.204Z,1516709190.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:30.236Z,1516709190.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:30.605Z,1516709190.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:30.633Z,1516709190.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:31.002Z,1516709191.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:31.033Z,1516709191.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:31.431Z,1516709191.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:31.446Z,1516709191.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:31.828Z,1516709191.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:31.842Z,1516709191.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:32.223Z,1516709192.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:32.238Z,1516709192.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:32.604Z,1516709192.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:32.640Z,1516709192.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:33.004Z,1516709193.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:33.037Z,1516709193.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:33.409Z,1516709193.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:33.435Z,1516709193.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:33.804Z,1516709193.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:33.837Z,1516709193.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:34.229Z,1516709194.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:34.244Z,1516709194.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:34.630Z,1516709194.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:34.645Z,1516709194.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:35.015Z,1516709195.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:35.048Z,1516709195.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:35.404Z,1516709195.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:35.443Z,1516709195.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:35.812Z,1516709195.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:35.844Z,1516709195.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:36.205Z,1516709196.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:36.241Z,1516709196.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:36.609Z,1516709196.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:36.624Z,1516709196.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:37.006Z,1516709197.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:37.021Z,1516709197.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:37.427Z,1516709197.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:37.457Z,1516709197.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:37.839Z,1516709197.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:37.854Z,1516709197.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:38.219Z,1516709198.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:38.246Z,1516709198.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:38.610Z,1516709198.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:38.625Z,1516709198.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:39.010Z,1516709199.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:39.025Z,1516709199.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:39.413Z,1516709199.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:39.429Z,1516709199.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:39.810Z,1516709199.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:39.833Z,1516709199.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:40.227Z,1516709200.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:40.259Z,1516709200.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:40.615Z,1516709200.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:40.630Z,1516709200.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:41.015Z,1516709201.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:41.030Z,1516709201.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:41.420Z,1516709201.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:41.435Z,1516709201.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:41.813Z,1516709201.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:41.829Z,1516709201.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:42.214Z,1516709202.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:42.229Z,1516709202.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:42.614Z,1516709202.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:42.629Z,1516709202.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:43.008Z,1516709203.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:43.035Z,1516709203.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:43.419Z,1516709203.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:43.434Z,1516709203.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:43.819Z,1516709203.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:43.840Z,1516709203.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:44.219Z,1516709204.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:44.234Z,1516709204.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:44.613Z,1516709204.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:44.628Z,1516709204.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:45.014Z,1516709205.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:45.029Z,1516709205.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:45.412Z,1516709205.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:45.439Z,1516709205.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:45.812Z,1516709205.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:45.828Z,1516709205.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:46.221Z,1516709206.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:46.237Z,1516709206.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:46.622Z,1516709206.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:46.637Z,1516709206.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:47.022Z,1516709207.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:47.041Z,1516709207.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:47.414Z,1516709207.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:47.429Z,1516709207.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:47.808Z,1516709207.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:47.830Z,1516709207.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:48.210Z,1516709208.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:48.241Z,1516709208.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:48.605Z,1516709208.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:48.641Z,1516709208.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:49.002Z,1516709209.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:49.038Z,1516709209.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:49.427Z,1516709209.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:49.442Z,1516709209.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:49.830Z,1516709209.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:49.845Z,1516709209.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:50.224Z,1516709210.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:50.240Z,1516709210.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:50.604Z,1516709210.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:50.637Z,1516709210.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:51.004Z,1516709211.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:51.040Z,1516709211.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:51.421Z,1516709211.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:51.437Z,1516709211.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:51.804Z,1516709211.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:51.837Z,1516709211.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:52.224Z,1516709212.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:52.239Z,1516709212.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:52.626Z,1516709212.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:52.641Z,1516709212.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:53.031Z,1516709213.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:53.046Z,1516709213.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:53.404Z,1516709213.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:53.441Z,1516709213.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:53.812Z,1516709213.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:53.843Z,1516709213.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:54.208Z,1516709214.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:54.235Z,1516709214.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:54.627Z,1516709214.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:54.642Z,1516709214.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:55.007Z,1516709215.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:55.038Z,1516709215.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:55.436Z,1516709215.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:55.451Z,1516709215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:55.827Z,1516709215.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:55.853Z,1516709215.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:56.224Z,1516709216.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:56.257Z,1516709216.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:56.614Z,1516709216.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:56.644Z,1516709216.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:57.005Z,1516709217.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:57.021Z,1516709217.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:57.406Z,1516709217.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:57.422Z,1516709217.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:57.813Z,1516709217.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:57.829Z,1516709217.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:58.224Z,1516709218.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:58.257Z,1516709218.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:58.624Z,1516709218.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:58.656Z,1516709218.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:59.028Z,1516709219.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:59.061Z,1516709219.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:59.415Z,1516709219.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:59.431Z,1516709219.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:06:59.810Z,1516709219.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:06:59.825Z,1516709219.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:00.209Z,1516709220.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:00.233Z,1516709220.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:00.613Z,1516709220.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:00.628Z,1516709220.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:01.015Z,1516709221.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:01.030Z,1516709221.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:01.423Z,1516709221.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:01.438Z,1516709221.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:01.819Z,1516709221.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:01.834Z,1516709221.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:02.215Z,1516709222.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:02.230Z,1516709222.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:02.612Z,1516709222.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:02.635Z,1516709222.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:03.017Z,1516709223.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:03.031Z,1516709223.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:03.418Z,1516709223.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:03.433Z,1516709223.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:03.812Z,1516709223.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:03.827Z,1516709223.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:04.221Z,1516709224.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:04.240Z,1516709224.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:07.319Z,1516709227.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:07.341Z,1516709227.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:07.462Z,1516709227.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:07.477Z,1516709227.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:07.833Z,1516709227.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:07.876Z,1516709227.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:08.225Z,1516709228.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:08.245Z,1516709228.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:08.620Z,1516709228.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:08.643Z,1516709228.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:09.028Z,1516709229.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:09.043Z,1516709229.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:09.432Z,1516709229.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:09.447Z,1516709229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:09.831Z,1516709229.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:09.846Z,1516709229.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:10.230Z,1516709230.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:10.252Z,1516709230.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:10.625Z,1516709230.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:10.640Z,1516709230.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:11.029Z,1516709231.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:11.045Z,1516709231.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:11.429Z,1516709231.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:11.444Z,1516709231.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:11.828Z,1516709231.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:11.844Z,1516709231.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:12.232Z,1516709232.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:12.247Z,1516709232.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:12.635Z,1516709232.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:12.650Z,1516709232.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:13.032Z,1516709233.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:13.046Z,1516709233.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:13.421Z,1516709233.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:13.443Z,1516709233.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:13.829Z,1516709233.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:13.843Z,1516709233.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:14.230Z,1516709234.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:14.249Z,1516709234.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:14.643Z,1516709234.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:14.658Z,1516709234.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:15.035Z,1516709235.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:15.056Z,1516709235.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:15.433Z,1516709235.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:15.448Z,1516709235.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:15.826Z,1516709235.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:15.842Z,1516709235.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:16.235Z,1516709236.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:16.250Z,1516709236.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:16.635Z,1516709236.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:16.650Z,1516709236.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:17.037Z,1516709237.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:17.052Z,1516709237.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:17.428Z,1516709237.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:17.442Z,1516709237.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:17.832Z,1516709237.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:17.847Z,1516709237.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:18.235Z,1516709238.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:18.251Z,1516709238.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:18.637Z,1516709238.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:18.656Z,1516709238.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:19.032Z,1516709239.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:19.060Z,1516709239.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:19.434Z,1516709239.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:19.449Z,1516709239.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:19.838Z,1516709239.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:19.852Z,1516709239.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:20.237Z,1516709240.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:20.256Z,1516709240.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:20.636Z,1516709240.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:20.659Z,1516709240.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:21.040Z,1516709241.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:21.061Z,1516709241.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:21.422Z,1516709241.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:21.457Z,1516709241.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:21.817Z,1516709241.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:21.853Z,1516709241.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:22.230Z,1516709242.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:22.245Z,1516709242.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x48538 got:0x60167 2018-01-23T12:07:22.265Z,1516709242.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:22.628Z,1516709242.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:22.654Z,1516709242.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:23.048Z,1516709243.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:23.063Z,1516709243.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:23.417Z,1516709243.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:23.445Z,1516709243.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:23.818Z,1516709243.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:23.828Z,1516709243.828 [PNI_TCM](ERROR): CRC does not match. Expected:0x45657 got:0x47470 2018-01-23T12:07:23.864Z,1516709243.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:24.228Z,1516709244.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:24.265Z,1516709244.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:24.646Z,1516709244.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:24.667Z,1516709244.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:25.029Z,1516709245.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:25.057Z,1516709245.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:25.419Z,1516709245.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:25.452Z,1516709245.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:25.823Z,1516709245.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:25.838Z,1516709245.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:26.231Z,1516709246.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:26.258Z,1516709246.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:26.636Z,1516709246.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:26.668Z,1516709246.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:27.040Z,1516709247.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:27.066Z,1516709247.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:27.431Z,1516709247.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:27.446Z,1516709247.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:27.826Z,1516709247.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:27.841Z,1516709247.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:28.232Z,1516709248.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:28.250Z,1516709248.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:28.643Z,1516709248.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:28.675Z,1516709248.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:29.032Z,1516709249.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:29.053Z,1516709249.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:29.422Z,1516709249.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:29.437Z,1516709249.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:29.816Z,1516709249.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:29.851Z,1516709249.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:30.236Z,1516709250.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:30.263Z,1516709250.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:30.633Z,1516709250.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:30.669Z,1516709250.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:31.031Z,1516709251.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:31.058Z,1516709251.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:31.429Z,1516709251.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:31.472Z,1516709251.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:31.830Z,1516709251.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:31.839Z,1516709251.839 [PNI_TCM](ERROR): CRC does not match. Expected:0x53129 got:0x48195 2018-01-23T12:07:31.873Z,1516709251.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:32.240Z,1516709252.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:32.265Z,1516709252.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:32.643Z,1516709252.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:32.666Z,1516709252.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:33.041Z,1516709253.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:33.069Z,1516709253.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:33.431Z,1516709253.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:33.468Z,1516709253.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:33.830Z,1516709253.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:33.845Z,1516709253.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:34.247Z,1516709254.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:34.277Z,1516709254.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:34.632Z,1516709254.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:34.672Z,1516709254.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:35.028Z,1516709255.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:35.039Z,1516709255.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T12:07:35.072Z,1516709255.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:35.424Z,1516709255.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:35.449Z,1516709255.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:35.829Z,1516709255.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:35.844Z,1516709255.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:36.244Z,1516709256.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:36.270Z,1516709256.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:36.633Z,1516709256.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:36.663Z,1516709256.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:37.042Z,1516709257.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:37.077Z,1516709257.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:37.425Z,1516709257.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:37.453Z,1516709257.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:37.827Z,1516709257.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:37.874Z,1516709257.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:38.230Z,1516709258.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:38.250Z,1516709258.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:38.635Z,1516709258.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:38.657Z,1516709258.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:39.039Z,1516709259.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:39.064Z,1516709259.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:39.430Z,1516709259.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:39.477Z,1516709259.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:39.820Z,1516709259.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:39.849Z,1516709259.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:40.239Z,1516709260.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:40.254Z,1516709260.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:40.642Z,1516709260.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:40.662Z,1516709260.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:41.038Z,1516709261.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:41.080Z,1516709261.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:41.426Z,1516709261.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:41.442Z,1516709261.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:41.819Z,1516709261.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:41.857Z,1516709261.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:42.242Z,1516709262.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:42.262Z,1516709262.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:42.642Z,1516709262.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:42.669Z,1516709262.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:43.039Z,1516709263.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:43.058Z,1516709263.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:43.434Z,1516709263.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:43.452Z,1516709263.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:43.816Z,1516709263.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:43.850Z,1516709263.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:44.239Z,1516709264.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:44.273Z,1516709264.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:44.643Z,1516709264.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:44.662Z,1516709264.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:45.035Z,1516709265.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:45.053Z,1516709265.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:45.417Z,1516709265.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:45.452Z,1516709265.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:45.817Z,1516709265.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:45.865Z,1516709265.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:46.220Z,1516709266.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:46.249Z,1516709266.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:46.640Z,1516709266.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:46.658Z,1516709266.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:47.038Z,1516709267.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:47.057Z,1516709267.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:47.426Z,1516709267.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:47.469Z,1516709267.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:47.819Z,1516709267.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:47.845Z,1516709267.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:48.216Z,1516709268.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:48.256Z,1516709268.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:48.621Z,1516709268.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:48.657Z,1516709268.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:49.020Z,1516709269.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:49.052Z,1516709269.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:49.427Z,1516709269.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:49.466Z,1516709269.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:49.847Z,1516709269.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:49.864Z,1516709269.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:50.231Z,1516709270.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:50.261Z,1516709270.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:50.616Z,1516709270.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:50.669Z,1516709270.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:51.024Z,1516709271.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:51.039Z,1516709271.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:51.418Z,1516709271.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:51.437Z,1516709271.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:51.822Z,1516709271.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:51.838Z,1516709271.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:52.225Z,1516709272.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:52.240Z,1516709272.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:52.627Z,1516709272.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:52.643Z,1516709272.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:53.031Z,1516709273.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:53.046Z,1516709273.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:53.440Z,1516709273.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:53.477Z,1516709273.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:53.826Z,1516709273.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:53.869Z,1516709273.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:54.224Z,1516709274.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:54.239Z,1516709274.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:54.625Z,1516709274.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:54.644Z,1516709274.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:55.025Z,1516709275.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:55.042Z,1516709275.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:55.427Z,1516709275.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:55.443Z,1516709275.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:55.831Z,1516709275.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:55.852Z,1516709275.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:56.239Z,1516709276.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:56.272Z,1516709276.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:56.624Z,1516709276.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:56.639Z,1516709276.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:57.026Z,1516709277.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:57.041Z,1516709277.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:57.425Z,1516709277.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:57.440Z,1516709277.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:57.821Z,1516709277.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:57.843Z,1516709277.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:58.222Z,1516709278.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:58.252Z,1516709278.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:58.634Z,1516709278.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:58.649Z,1516709278.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:59.034Z,1516709279.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:59.049Z,1516709279.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:59.435Z,1516709279.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:59.450Z,1516709279.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:07:59.833Z,1516709279.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:07:59.849Z,1516709279.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:00.224Z,1516709280.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:00.251Z,1516709280.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:00.630Z,1516709280.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:00.645Z,1516709280.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:01.025Z,1516709281.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:01.045Z,1516709281.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:01.435Z,1516709281.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:01.451Z,1516709281.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:01.839Z,1516709281.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:01.854Z,1516709281.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:02.235Z,1516709282.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:02.250Z,1516709282.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:02.633Z,1516709282.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:02.655Z,1516709282.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:03.023Z,1516709283.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:03.045Z,1516709283.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:03.420Z,1516709283.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:03.444Z,1516709283.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:03.821Z,1516709283.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:03.844Z,1516709283.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:04.226Z,1516709284.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:04.241Z,1516709284.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:07.329Z,1516709287.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:07.346Z,1516709287.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:07.349Z,1516709287.349 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:03:06.2Z 2018-01-23T12:08:07.350Z,1516709287.350 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:08:07.350Z,1516709287.350 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:08:07.483Z,1516709287.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:07.498Z,1516709287.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:07.940Z,1516709287.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:07.954Z,1516709287.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:08.205Z,1516709288.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:08.241Z,1516709288.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:08.605Z,1516709288.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:08.636Z,1516709288.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:09.001Z,1516709289.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:09.016Z,1516709289.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:12.324Z,1516709292.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:12.353Z,1516709292.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:12.439Z,1516709292.439 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0208.lzma 2018-01-23T12:08:12.472Z,1516709292.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:12.520Z,1516709292.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:12.815Z,1516709292.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:12.846Z,1516709292.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:13.177Z,1516709293.177 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0208.lzma.bak 2018-01-23T12:08:13.178Z,1516709293.178 [DataOverHttps](INFO): SBD MOMSN=7755543 2018-01-23T12:08:13.215Z,1516709293.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:13.230Z,1516709293.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:13.842Z,1516709293.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:13.857Z,1516709293.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:14.005Z,1516709294.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:14.021Z,1516709294.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:17.145Z,1516709297.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:17.160Z,1516709297.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:17.272Z,1516709297.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:17.297Z,1516709297.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:17.627Z,1516709297.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:17.652Z,1516709297.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:18.017Z,1516709298.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:18.060Z,1516709298.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:18.412Z,1516709298.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:18.433Z,1516709298.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:18.812Z,1516709298.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:18.827Z,1516709298.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:21.908Z,1516709301.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:21.924Z,1516709301.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:22.003Z,1516709302.003 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0209.lzma 2018-01-23T12:08:22.036Z,1516709302.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:22.077Z,1516709302.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:22.394Z,1516709302.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:22.417Z,1516709302.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:22.752Z,1516709302.752 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0209.lzma.bak 2018-01-23T12:08:22.753Z,1516709302.753 [DataOverHttps](INFO): SBD MOMSN=7755545 2018-01-23T12:08:22.796Z,1516709302.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:22.833Z,1516709302.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:23.407Z,1516709303.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:23.422Z,1516709303.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:23.425Z,1516709303.425 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:08:23.425Z,1516709303.425 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:08:23.425Z,1516709303.425 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:08:23.582Z,1516709303.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:23.615Z,1516709303.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:26.671Z,1516709306.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:26.686Z,1516709306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:26.802Z,1516709306.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:26.817Z,1516709306.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:27.176Z,1516709307.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:27.191Z,1516709307.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:27.588Z,1516709307.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:27.612Z,1516709307.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:27.968Z,1516709307.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:27.987Z,1516709307.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:28.371Z,1516709308.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:28.386Z,1516709308.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:28.772Z,1516709308.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:28.787Z,1516709308.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:29.168Z,1516709309.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:29.188Z,1516709309.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:29.587Z,1516709309.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:29.602Z,1516709309.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:29.980Z,1516709309.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:29.995Z,1516709309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:30.377Z,1516709310.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:30.404Z,1516709310.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:30.776Z,1516709310.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:30.797Z,1516709310.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:31.161Z,1516709311.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:31.197Z,1516709311.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:31.566Z,1516709311.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:31.594Z,1516709311.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:31.961Z,1516709311.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:31.993Z,1516709311.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:32.389Z,1516709312.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:32.405Z,1516709312.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:32.780Z,1516709312.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:32.803Z,1516709312.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:33.171Z,1516709313.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:33.210Z,1516709313.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:33.212Z,1516709313.212 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:33.213Z,1516709313.213 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177 2018-01-23T12:08:33.213Z,1516709313.213 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:08:33.233Z,1516709313.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:08:33.560Z,1516709313.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:33.593Z,1516709313.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:33.593Z,1516709313.593 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177 2018-01-23T12:08:33.594Z,1516709313.593 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:08:33.599Z,1516709313.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:33.600Z,1516709313.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 177 2018-01-23T12:08:33.600Z,1516709313.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:08:33.620Z,1516709313.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:08:33.620Z,1516709313.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:08:33.620Z,1516709313.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:08:33.620Z,1516709313.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177 2018-01-23T12:08:33.965Z,1516709313.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:33.997Z,1516709313.997 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:08:33.997Z,1516709313.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:08:33.997Z,1516709313.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:08:34.014Z,1516709314.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:08:34.014Z,1516709314.014 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177 2018-01-23T12:08:34.019Z,1516709314.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:08:34.019Z,1516709314.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 177 2018-01-23T12:08:34.373Z,1516709314.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:34.408Z,1516709314.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:08:34.408Z,1516709314.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:08:34.408Z,1516709314.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:08:34.409Z,1516709314.409 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:08:34.409Z,1516709314.409 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:08:34.410Z,1516709314.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:08:34.769Z,1516709314.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:34.789Z,1516709314.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:08:34.790Z,1516709314.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:35.168Z,1516709315.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:35.182Z,1516709315.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:08:35.183Z,1516709315.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:35.587Z,1516709315.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:35.617Z,1516709315.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:08:35.618Z,1516709315.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:35.974Z,1516709315.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:35.997Z,1516709315.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:08:35.998Z,1516709315.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:36.376Z,1516709316.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:36.394Z,1516709316.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:08:36.395Z,1516709316.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:36.764Z,1516709316.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:36.786Z,1516709316.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:08:36.787Z,1516709316.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:37.174Z,1516709317.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:37.188Z,1516709317.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:08:37.189Z,1516709317.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:37.576Z,1516709317.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:37.596Z,1516709317.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:08:37.597Z,1516709317.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:37.966Z,1516709317.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:37.989Z,1516709317.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:08:37.990Z,1516709317.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:38.379Z,1516709318.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:38.393Z,1516709318.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:08:38.394Z,1516709318.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:38.783Z,1516709318.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:38.798Z,1516709318.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:08:38.799Z,1516709318.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:39.182Z,1516709319.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:39.204Z,1516709319.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:08:39.205Z,1516709319.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:39.569Z,1516709319.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:39.584Z,1516709319.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:08:39.585Z,1516709319.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:39.961Z,1516709319.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:39.995Z,1516709319.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:08:39.996Z,1516709319.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:40.371Z,1516709320.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:40.397Z,1516709320.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:08:40.398Z,1516709320.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:40.769Z,1516709320.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:40.796Z,1516709320.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:08:40.797Z,1516709320.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:41.160Z,1516709321.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:41.192Z,1516709321.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:08:41.193Z,1516709321.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:41.579Z,1516709321.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:41.594Z,1516709321.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:08:41.595Z,1516709321.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:41.984Z,1516709321.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:41.998Z,1516709321.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:08:41.999Z,1516709321.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:42.384Z,1516709322.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:42.398Z,1516709322.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:08:42.399Z,1516709322.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:42.760Z,1516709322.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:42.792Z,1516709322.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:08:42.793Z,1516709322.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:43.159Z,1516709323.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:43.174Z,1516709323.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:08:43.175Z,1516709323.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:43.564Z,1516709323.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:43.578Z,1516709323.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:08:43.579Z,1516709323.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:43.973Z,1516709323.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:44.008Z,1516709324.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:08:44.009Z,1516709324.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:44.375Z,1516709324.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:44.410Z,1516709324.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:08:44.411Z,1516709324.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:44.784Z,1516709324.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:44.809Z,1516709324.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:08:44.810Z,1516709324.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:45.195Z,1516709325.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:45.210Z,1516709325.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:08:45.211Z,1516709325.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:45.565Z,1516709325.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:45.584Z,1516709325.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:08:45.585Z,1516709325.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:45.968Z,1516709325.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:46.004Z,1516709326.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:08:46.005Z,1516709326.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:46.365Z,1516709326.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:46.412Z,1516709326.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:08:46.413Z,1516709326.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:46.763Z,1516709326.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:46.778Z,1516709326.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:08:46.779Z,1516709326.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:47.166Z,1516709327.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:47.192Z,1516709327.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:08:47.193Z,1516709327.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:47.577Z,1516709327.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:47.591Z,1516709327.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:08:47.592Z,1516709327.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:47.978Z,1516709327.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:47.993Z,1516709327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:08:47.993Z,1516709327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:48.380Z,1516709328.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:48.397Z,1516709328.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:08:48.397Z,1516709328.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:48.776Z,1516709328.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:48.796Z,1516709328.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:08:48.797Z,1516709328.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:49.200Z,1516709329.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:49.230Z,1516709329.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:08:49.231Z,1516709329.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:49.573Z,1516709329.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:49.588Z,1516709329.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:08:49.589Z,1516709329.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:49.970Z,1516709329.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:49.993Z,1516709329.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:08:49.994Z,1516709329.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:50.380Z,1516709330.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:50.395Z,1516709330.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:08:50.396Z,1516709330.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:50.786Z,1516709330.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:50.801Z,1516709330.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:08:50.801Z,1516709330.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:51.186Z,1516709331.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:51.208Z,1516709331.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:08:51.209Z,1516709331.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:51.563Z,1516709331.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:51.592Z,1516709331.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:08:51.593Z,1516709331.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:51.963Z,1516709331.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:52.007Z,1516709332.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:08:52.008Z,1516709332.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:52.388Z,1516709332.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:52.402Z,1516709332.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:08:52.403Z,1516709332.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:52.789Z,1516709332.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:52.804Z,1516709332.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:08:52.805Z,1516709332.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:53.190Z,1516709333.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:53.205Z,1516709333.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:08:53.206Z,1516709333.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:53.575Z,1516709333.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:53.608Z,1516709333.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:53.969Z,1516709333.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:53.000Z,1516709334.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:54.394Z,1516709334.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:54.409Z,1516709334.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:54.794Z,1516709334.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:54.809Z,1516709334.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:55.180Z,1516709335.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:55.205Z,1516709335.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:55.574Z,1516709335.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:55.605Z,1516709335.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:55.973Z,1516709335.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:56.014Z,1516709336.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:56.386Z,1516709336.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:56.469Z,1516709336.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:56.784Z,1516709336.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:56.817Z,1516709336.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:57.188Z,1516709337.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:57.213Z,1516709337.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:57.570Z,1516709337.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:57.585Z,1516709337.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:57.971Z,1516709337.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:57.988Z,1516709337.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:58.384Z,1516709338.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:58.422Z,1516709338.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:58.787Z,1516709338.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:58.812Z,1516709338.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:59.175Z,1516709339.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:59.191Z,1516709339.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:59.571Z,1516709339.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:59.589Z,1516709339.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:08:59.971Z,1516709339.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:08:59.986Z,1516709339.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:00.373Z,1516709340.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:00.393Z,1516709340.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:00.779Z,1516709340.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:00.817Z,1516709340.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:01.175Z,1516709341.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:01.193Z,1516709341.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:01.574Z,1516709341.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:01.589Z,1516709341.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:01.972Z,1516709341.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:01.987Z,1516709341.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:02.376Z,1516709342.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:02.391Z,1516709342.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:02.776Z,1516709342.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:02.794Z,1516709342.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:03.176Z,1516709343.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:03.191Z,1516709343.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:03.571Z,1516709343.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:03.597Z,1516709343.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:03.971Z,1516709343.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:03.986Z,1516709343.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:04.374Z,1516709344.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:04.415Z,1516709344.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:04.777Z,1516709344.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:04.785Z,1516709344.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x52505 got:0x45209 2018-01-23T12:09:04.819Z,1516709344.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:05.178Z,1516709345.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:05.193Z,1516709345.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:05.568Z,1516709345.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:05.595Z,1516709345.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:05.974Z,1516709345.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:06.001Z,1516709346.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:06.381Z,1516709346.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:06.393Z,1516709346.393 [PNI_TCM](ERROR): CRC does not match. Expected:0x2448 got:0x33237 2018-01-23T12:09:06.432Z,1516709346.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:06.779Z,1516709346.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:06.794Z,1516709346.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:07.183Z,1516709347.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:07.204Z,1516709347.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:07.575Z,1516709347.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:07.621Z,1516709347.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:07.970Z,1516709347.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:07.980Z,1516709347.980 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T12:09:08.005Z,1516709348.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:08.388Z,1516709348.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:08.396Z,1516709348.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x21272 got:0x15536 2018-01-23T12:09:08.430Z,1516709348.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:08.786Z,1516709348.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:08.809Z,1516709348.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:09.184Z,1516709349.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:09.226Z,1516709349.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:09.562Z,1516709349.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:09.586Z,1516709349.586 [PNI_TCM](ERROR): CRC does not match. Expected:0x44536 got:0x174 2018-01-23T12:09:09.605Z,1516709349.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:09.959Z,1516709349.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:09.993Z,1516709349.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:10.376Z,1516709350.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:10.388Z,1516709350.388 [PNI_TCM](ERROR): CRC does not match. Expected:0x11085 got:0x35 2018-01-23T12:09:10.405Z,1516709350.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:10.785Z,1516709350.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:10.829Z,1516709350.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:11.176Z,1516709351.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:11.194Z,1516709351.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x6804 got:0x16839 2018-01-23T12:09:11.222Z,1516709351.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:11.561Z,1516709351.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:11.592Z,1516709351.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:11.961Z,1516709351.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:12.002Z,1516709352.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:12.379Z,1516709352.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:12.427Z,1516709352.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:12.785Z,1516709352.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:12.802Z,1516709352.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:13.181Z,1516709353.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:13.208Z,1516709353.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:13.577Z,1516709353.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:13.593Z,1516709353.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:13.960Z,1516709353.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:14.006Z,1516709354.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:14.385Z,1516709354.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:14.404Z,1516709354.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:14.777Z,1516709354.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:14.802Z,1516709354.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:15.182Z,1516709355.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:15.197Z,1516709355.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:15.561Z,1516709355.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:15.599Z,1516709355.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:15.958Z,1516709355.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:15.998Z,1516709355.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:16.385Z,1516709356.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:16.405Z,1516709356.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:16.790Z,1516709356.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:16.804Z,1516709356.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:17.176Z,1516709357.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:17.213Z,1516709357.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:17.561Z,1516709357.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:17.596Z,1516709357.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:17.973Z,1516709357.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:17.992Z,1516709357.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:18.384Z,1516709358.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:18.405Z,1516709358.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:18.784Z,1516709358.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:18.830Z,1516709358.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:19.177Z,1516709359.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:19.205Z,1516709359.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:19.561Z,1516709359.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:19.594Z,1516709359.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:19.965Z,1516709359.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:19.998Z,1516709359.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:20.360Z,1516709360.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:20.398Z,1516709360.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:20.771Z,1516709360.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:20.810Z,1516709360.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:21.190Z,1516709361.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:21.207Z,1516709361.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:21.571Z,1516709361.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:21.602Z,1516709361.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:21.958Z,1516709361.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:22.000Z,1516709362.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:22.360Z,1516709362.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:22.402Z,1516709362.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:22.765Z,1516709362.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:22.780Z,1516709362.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:23.160Z,1516709363.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:23.181Z,1516709363.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:23.571Z,1516709363.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:23.587Z,1516709363.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:23.975Z,1516709363.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:23.990Z,1516709363.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:27.076Z,1516709367.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:27.097Z,1516709367.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:27.198Z,1516709367.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:27.226Z,1516709367.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:27.578Z,1516709367.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:27.618Z,1516709367.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:27.972Z,1516709367.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:27.990Z,1516709367.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:28.387Z,1516709368.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:28.425Z,1516709368.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:28.779Z,1516709368.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:28.794Z,1516709368.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:29.177Z,1516709369.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:29.198Z,1516709369.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:29.573Z,1516709369.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:29.597Z,1516709369.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:29.974Z,1516709369.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:29.989Z,1516709369.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:30.372Z,1516709370.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:30.388Z,1516709370.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:30.778Z,1516709370.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:30.797Z,1516709370.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:31.178Z,1516709371.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:31.196Z,1516709371.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:31.580Z,1516709371.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:31.595Z,1516709371.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:31.973Z,1516709371.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:31.988Z,1516709371.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:32.374Z,1516709372.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:32.388Z,1516709372.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:32.772Z,1516709372.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:32.792Z,1516709372.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:33.178Z,1516709373.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:33.193Z,1516709373.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:33.579Z,1516709373.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:33.594Z,1516709373.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:33.981Z,1516709373.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:33.997Z,1516709373.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:34.383Z,1516709374.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:34.401Z,1516709374.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:34.774Z,1516709374.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:34.789Z,1516709374.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:35.168Z,1516709375.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:35.197Z,1516709375.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:35.577Z,1516709375.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:35.592Z,1516709375.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:35.974Z,1516709375.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:35.989Z,1516709375.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:36.368Z,1516709376.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:36.394Z,1516709376.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:36.782Z,1516709376.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:36.798Z,1516709376.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:37.186Z,1516709377.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:37.209Z,1516709377.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:37.583Z,1516709377.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:37.598Z,1516709377.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:37.968Z,1516709377.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:37.990Z,1516709377.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:38.381Z,1516709378.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:38.396Z,1516709378.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:38.772Z,1516709378.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:38.792Z,1516709378.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:39.167Z,1516709379.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:39.200Z,1516709379.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:39.584Z,1516709379.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:39.599Z,1516709379.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:39.983Z,1516709379.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:40.011Z,1516709380.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:40.383Z,1516709380.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:40.405Z,1516709380.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:40.764Z,1516709380.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:40.793Z,1516709380.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:41.162Z,1516709381.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:41.190Z,1516709381.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:41.564Z,1516709381.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:41.597Z,1516709381.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:41.965Z,1516709381.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:42.002Z,1516709382.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:42.368Z,1516709382.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:42.395Z,1516709382.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:42.783Z,1516709382.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:42.798Z,1516709382.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:43.188Z,1516709383.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:43.203Z,1516709383.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:43.584Z,1516709383.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:43.599Z,1516709383.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:43.964Z,1516709383.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:44.001Z,1516709384.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:44.365Z,1516709384.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:44.406Z,1516709384.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:44.770Z,1516709384.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:44.797Z,1516709384.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:45.165Z,1516709385.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:45.201Z,1516709385.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:45.579Z,1516709385.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:45.603Z,1516709385.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:45.980Z,1516709385.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:46.003Z,1516709386.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:46.380Z,1516709386.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:46.414Z,1516709386.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:46.764Z,1516709386.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:46.802Z,1516709386.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:47.162Z,1516709387.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:47.185Z,1516709387.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:47.564Z,1516709387.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:47.603Z,1516709387.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:47.965Z,1516709387.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:48.004Z,1516709388.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:48.367Z,1516709388.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:48.402Z,1516709388.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:48.775Z,1516709388.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:48.807Z,1516709388.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:49.179Z,1516709389.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:49.209Z,1516709389.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:49.576Z,1516709389.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:49.612Z,1516709389.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:49.965Z,1516709389.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:49.985Z,1516709389.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:50.373Z,1516709390.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:50.388Z,1516709390.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:50.775Z,1516709390.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:50.790Z,1516709390.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:51.170Z,1516709391.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:51.207Z,1516709391.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:51.578Z,1516709391.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:51.594Z,1516709391.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:51.979Z,1516709391.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:52.001Z,1516709392.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:52.392Z,1516709392.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:52.423Z,1516709392.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:52.773Z,1516709392.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:52.788Z,1516709392.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:53.168Z,1516709393.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:53.188Z,1516709393.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:53.568Z,1516709393.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:53.600Z,1516709393.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:53.978Z,1516709393.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:53.993Z,1516709393.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:54.376Z,1516709394.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:54.391Z,1516709394.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:54.782Z,1516709394.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:54.797Z,1516709394.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:55.186Z,1516709395.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:55.201Z,1516709395.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:55.582Z,1516709395.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:55.598Z,1516709395.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:55.968Z,1516709395.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:55.990Z,1516709395.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:56.373Z,1516709396.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:56.392Z,1516709396.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:56.773Z,1516709396.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:56.789Z,1516709396.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:57.167Z,1516709397.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:57.199Z,1516709397.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:57.584Z,1516709397.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:57.599Z,1516709397.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:57.986Z,1516709397.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:58.002Z,1516709398.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:58.382Z,1516709398.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:58.397Z,1516709398.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:58.773Z,1516709398.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:58.792Z,1516709398.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:59.162Z,1516709399.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:59.190Z,1516709399.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:59.564Z,1516709399.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:09:59.597Z,1516709399.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:09:59.965Z,1516709399.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:00.001Z,1516709400.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:00.364Z,1516709400.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:00.397Z,1516709400.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:00.780Z,1516709400.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:00.801Z,1516709400.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:01.187Z,1516709401.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:01.202Z,1516709401.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:01.580Z,1516709401.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:01.601Z,1516709401.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:01.964Z,1516709401.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:01.990Z,1516709401.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:02.364Z,1516709402.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:02.400Z,1516709402.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:02.765Z,1516709402.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:02.792Z,1516709402.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:03.164Z,1516709403.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:03.197Z,1516709403.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:03.584Z,1516709403.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:03.599Z,1516709403.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:03.987Z,1516709403.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:04.002Z,1516709404.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:04.382Z,1516709404.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:04.397Z,1516709404.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:04.764Z,1516709404.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:04.792Z,1516709404.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:05.162Z,1516709405.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:05.197Z,1516709405.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:05.576Z,1516709405.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:05.594Z,1516709405.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:05.965Z,1516709405.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:05.993Z,1516709405.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:06.364Z,1516709406.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:06.401Z,1516709406.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:06.782Z,1516709406.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:06.797Z,1516709406.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:07.187Z,1516709407.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:07.202Z,1516709407.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:07.583Z,1516709407.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:07.598Z,1516709407.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:07.980Z,1516709407.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:08.001Z,1516709408.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:08.364Z,1516709408.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:08.397Z,1516709408.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:08.777Z,1516709408.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:08.793Z,1516709408.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:09.164Z,1516709409.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:09.201Z,1516709409.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:09.588Z,1516709409.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:09.603Z,1516709409.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:09.979Z,1516709409.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:10.002Z,1516709410.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:10.379Z,1516709410.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:10.402Z,1516709410.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:10.765Z,1516709410.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:10.802Z,1516709410.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:11.162Z,1516709411.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:11.185Z,1516709411.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:11.572Z,1516709411.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:11.599Z,1516709411.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:11.966Z,1516709411.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:12.002Z,1516709412.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:12.369Z,1516709412.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:12.400Z,1516709412.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:12.776Z,1516709412.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:12.809Z,1516709412.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:13.180Z,1516709413.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:13.216Z,1516709413.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:13.580Z,1516709413.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:13.607Z,1516709413.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:13.964Z,1516709413.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:13.985Z,1516709413.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:14.373Z,1516709414.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:14.409Z,1516709414.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:14.774Z,1516709414.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:14.790Z,1516709414.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:15.174Z,1516709415.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:15.193Z,1516709415.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:15.579Z,1516709415.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:15.595Z,1516709415.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:15.975Z,1516709415.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:15.990Z,1516709415.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:16.375Z,1516709416.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:16.390Z,1516709416.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:16.772Z,1516709416.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:16.788Z,1516709416.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:17.170Z,1516709417.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:17.194Z,1516709417.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:17.577Z,1516709417.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:17.593Z,1516709417.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:17.978Z,1516709417.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:17.993Z,1516709417.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:18.372Z,1516709418.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:18.387Z,1516709418.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:18.777Z,1516709418.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:18.797Z,1516709418.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:19.179Z,1516709419.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:19.195Z,1516709419.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:19.578Z,1516709419.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:19.593Z,1516709419.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:19.972Z,1516709419.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:19.987Z,1516709419.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:20.368Z,1516709420.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:20.401Z,1516709420.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:20.777Z,1516709420.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:20.792Z,1516709420.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:21.168Z,1516709421.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:21.199Z,1516709421.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:21.584Z,1516709421.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:21.599Z,1516709421.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:21.986Z,1516709421.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:22.002Z,1516709422.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:22.383Z,1516709422.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:22.398Z,1516709422.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:22.772Z,1516709422.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:22.799Z,1516709422.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:23.176Z,1516709423.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:23.197Z,1516709423.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:23.581Z,1516709423.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:23.601Z,1516709423.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:23.972Z,1516709423.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:24.003Z,1516709424.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:27.078Z,1516709427.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:27.093Z,1516709427.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:27.204Z,1516709427.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:27.244Z,1516709427.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:27.552Z,1516709427.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:27.567Z,1516709427.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:27.964Z,1516709427.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:27.997Z,1516709427.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:28.344Z,1516709428.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:28.360Z,1516709428.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:28.744Z,1516709428.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:28.763Z,1516709428.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:29.145Z,1516709429.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:29.160Z,1516709429.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:29.550Z,1516709429.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:29.566Z,1516709429.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:29.951Z,1516709429.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:29.966Z,1516709429.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:30.350Z,1516709430.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:30.365Z,1516709430.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:30.740Z,1516709430.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:30.760Z,1516709430.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:31.144Z,1516709431.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:31.159Z,1516709431.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:31.545Z,1516709431.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:31.560Z,1516709431.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:31.944Z,1516709431.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:31.963Z,1516709431.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:32.344Z,1516709432.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:32.359Z,1516709432.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:32.750Z,1516709432.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:32.765Z,1516709432.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:33.151Z,1516709433.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:33.166Z,1516709433.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:33.549Z,1516709433.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:33.569Z,1516709433.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:33.945Z,1516709433.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:33.960Z,1516709433.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:34.341Z,1516709434.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:34.360Z,1516709434.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:34.744Z,1516709434.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:34.763Z,1516709434.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:35.145Z,1516709435.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:35.160Z,1516709435.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:35.550Z,1516709435.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:35.569Z,1516709435.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:35.951Z,1516709435.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:35.966Z,1516709435.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:36.350Z,1516709436.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:36.365Z,1516709436.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:36.748Z,1516709436.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:36.769Z,1516709436.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:37.148Z,1516709437.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:37.163Z,1516709437.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:37.550Z,1516709437.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:37.566Z,1516709437.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:37.955Z,1516709437.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:37.970Z,1516709437.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:38.349Z,1516709438.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:38.369Z,1516709438.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:38.749Z,1516709438.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:38.763Z,1516709438.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:39.141Z,1516709439.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:39.160Z,1516709439.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:39.549Z,1516709439.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:39.569Z,1516709439.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:39.951Z,1516709439.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:39.966Z,1516709439.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:40.349Z,1516709440.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:40.369Z,1516709440.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:40.741Z,1516709440.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:40.760Z,1516709440.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:41.142Z,1516709441.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:41.168Z,1516709441.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:41.554Z,1516709441.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:41.577Z,1516709441.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:41.953Z,1516709441.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:41.973Z,1516709441.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:42.355Z,1516709442.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:42.376Z,1516709442.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:42.744Z,1516709442.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:42.763Z,1516709442.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:43.140Z,1516709443.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:43.171Z,1516709443.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:43.556Z,1516709443.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:43.571Z,1516709443.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:43.958Z,1516709443.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:43.974Z,1516709443.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:44.354Z,1516709444.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:44.369Z,1516709444.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:44.746Z,1516709444.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:44.761Z,1516709444.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:45.140Z,1516709445.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:45.162Z,1516709445.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:45.558Z,1516709445.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:45.581Z,1516709445.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:45.959Z,1516709445.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:45.980Z,1516709445.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:46.355Z,1516709446.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:46.370Z,1516709446.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:46.744Z,1516709446.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:46.764Z,1516709446.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:47.145Z,1516709447.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:47.164Z,1516709447.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:47.558Z,1516709447.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:47.573Z,1516709447.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:47.958Z,1516709447.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:47.973Z,1516709447.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:48.356Z,1516709448.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:48.370Z,1516709448.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:48.744Z,1516709448.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:48.764Z,1516709448.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:49.139Z,1516709449.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:49.172Z,1516709449.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:49.556Z,1516709449.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:49.571Z,1516709449.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:49.956Z,1516709449.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:49.980Z,1516709449.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:50.356Z,1516709450.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:50.371Z,1516709450.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:50.738Z,1516709450.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:50.766Z,1516709450.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:51.134Z,1516709451.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:51.149Z,1516709451.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:51.547Z,1516709451.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:51.574Z,1516709451.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:51.951Z,1516709451.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:51.988Z,1516709451.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:52.348Z,1516709452.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:52.381Z,1516709452.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:52.737Z,1516709452.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:52.752Z,1516709452.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:53.141Z,1516709453.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:53.181Z,1516709453.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:53.551Z,1516709453.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:53.587Z,1516709453.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:53.955Z,1516709453.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:53.990Z,1516709453.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:54.359Z,1516709454.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:54.386Z,1516709454.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:54.745Z,1516709454.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:54.760Z,1516709454.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:55.142Z,1516709455.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:55.165Z,1516709455.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:55.559Z,1516709455.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:55.595Z,1516709455.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:55.955Z,1516709455.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:55.970Z,1516709455.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:56.348Z,1516709456.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:56.369Z,1516709456.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:56.747Z,1516709456.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:56.762Z,1516709456.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:57.144Z,1516709457.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:57.160Z,1516709457.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:57.550Z,1516709457.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:57.573Z,1516709457.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:57.955Z,1516709457.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:57.977Z,1516709457.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:58.354Z,1516709458.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:58.369Z,1516709458.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:58.741Z,1516709458.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:58.763Z,1516709458.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:59.146Z,1516709459.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:59.161Z,1516709459.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:59.550Z,1516709459.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:59.581Z,1516709459.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:10:59.959Z,1516709459.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:10:59.974Z,1516709459.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:00.357Z,1516709460.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:00.372Z,1516709460.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:00.745Z,1516709460.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:00.765Z,1516709460.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:01.141Z,1516709461.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:01.163Z,1516709461.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:01.556Z,1516709461.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:01.572Z,1516709461.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:01.956Z,1516709461.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:01.985Z,1516709461.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:02.361Z,1516709462.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:02.376Z,1516709462.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:02.738Z,1516709462.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:02.770Z,1516709462.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:03.140Z,1516709463.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:03.169Z,1516709463.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:03.554Z,1516709463.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:03.576Z,1516709463.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:03.957Z,1516709463.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:03.981Z,1516709463.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:04.365Z,1516709464.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:04.380Z,1516709464.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:04.738Z,1516709464.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:04.765Z,1516709464.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:05.141Z,1516709465.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:05.173Z,1516709465.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:05.548Z,1516709465.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:05.580Z,1516709465.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:05.959Z,1516709465.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:05.993Z,1516709465.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:06.360Z,1516709466.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:06.391Z,1516709466.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:06.750Z,1516709466.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:06.781Z,1516709466.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:07.144Z,1516709467.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:07.165Z,1516709467.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:07.560Z,1516709467.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:07.591Z,1516709467.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:07.955Z,1516709467.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:07.988Z,1516709467.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:08.359Z,1516709468.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:08.394Z,1516709468.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:08.745Z,1516709468.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:08.764Z,1516709468.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:09.142Z,1516709469.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:09.165Z,1516709469.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:09.547Z,1516709469.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:09.562Z,1516709469.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:09.951Z,1516709469.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:09.972Z,1516709469.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:10.352Z,1516709470.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:10.367Z,1516709470.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:10.744Z,1516709470.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:10.763Z,1516709470.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:11.145Z,1516709471.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:11.160Z,1516709471.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:11.552Z,1516709471.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:11.567Z,1516709471.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:11.951Z,1516709471.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:11.966Z,1516709471.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:12.351Z,1516709472.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:12.365Z,1516709472.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:12.744Z,1516709472.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:12.760Z,1516709472.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:13.141Z,1516709473.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:13.168Z,1516709473.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:13.545Z,1516709473.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:13.559Z,1516709473.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:13.953Z,1516709473.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:13.973Z,1516709473.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:14.353Z,1516709474.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:14.373Z,1516709474.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:14.755Z,1516709474.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:14.769Z,1516709474.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:15.144Z,1516709475.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:15.159Z,1516709475.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:15.548Z,1516709475.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:15.563Z,1516709475.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:15.946Z,1516709475.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:15.960Z,1516709475.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:16.342Z,1516709476.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:16.365Z,1516709476.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:16.754Z,1516709476.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:16.769Z,1516709476.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:17.154Z,1516709477.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:17.169Z,1516709477.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:17.554Z,1516709477.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:17.569Z,1516709477.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:17.944Z,1516709477.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:17.959Z,1516709477.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:18.345Z,1516709478.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:18.360Z,1516709478.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:18.744Z,1516709478.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:18.759Z,1516709478.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:19.140Z,1516709479.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:19.167Z,1516709479.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:19.544Z,1516709479.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:19.559Z,1516709479.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:19.955Z,1516709479.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:19.970Z,1516709479.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:20.358Z,1516709480.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:20.373Z,1516709480.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:20.756Z,1516709480.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:20.770Z,1516709480.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:21.144Z,1516709481.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:21.163Z,1516709481.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:21.540Z,1516709481.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:21.563Z,1516709481.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:21.945Z,1516709481.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:21.968Z,1516709481.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:22.349Z,1516709482.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:22.369Z,1516709482.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:22.755Z,1516709482.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:22.770Z,1516709482.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:23.158Z,1516709483.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:23.173Z,1516709483.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:23.555Z,1516709483.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:23.570Z,1516709483.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:23.943Z,1516709483.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:23.962Z,1516709483.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:24.346Z,1516709484.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:24.368Z,1516709484.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:27.455Z,1516709487.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:27.470Z,1516709487.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:27.573Z,1516709487.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:27.612Z,1516709487.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:27.942Z,1516709487.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:27.957Z,1516709487.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:28.347Z,1516709488.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:28.362Z,1516709488.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:28.724Z,1516709488.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:28.759Z,1516709488.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:29.116Z,1516709489.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:29.133Z,1516709489.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:29.518Z,1516709489.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:29.533Z,1516709489.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:29.920Z,1516709489.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:29.936Z,1516709489.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:30.317Z,1516709490.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:30.341Z,1516709490.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:30.723Z,1516709490.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:30.739Z,1516709490.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:31.123Z,1516709491.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:31.138Z,1516709491.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:31.523Z,1516709491.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:31.538Z,1516709491.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:31.918Z,1516709491.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:31.942Z,1516709491.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:32.320Z,1516709492.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:32.339Z,1516709492.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:32.719Z,1516709492.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:32.738Z,1516709492.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:33.115Z,1516709493.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:33.149Z,1516709493.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:33.525Z,1516709493.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:33.540Z,1516709493.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:33.931Z,1516709493.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:33.946Z,1516709493.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:34.339Z,1516709494.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:34.354Z,1516709494.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:34.356Z,1516709494.356 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:34.356Z,1516709494.356 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178 2018-01-23T12:11:34.356Z,1516709494.356 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:11:34.384Z,1516709494.384 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:11:34.728Z,1516709494.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:34.758Z,1516709494.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:34.758Z,1516709494.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178 2018-01-23T12:11:34.758Z,1516709494.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:11:34.760Z,1516709494.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:34.760Z,1516709494.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 178 2018-01-23T12:11:34.760Z,1516709494.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:11:34.780Z,1516709494.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:11:34.780Z,1516709494.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:11:34.781Z,1516709494.781 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:11:34.781Z,1516709494.781 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178 2018-01-23T12:11:35.117Z,1516709495.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:35.148Z,1516709495.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:11:35.148Z,1516709495.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:11:35.149Z,1516709495.149 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:11:35.160Z,1516709495.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:11:35.160Z,1516709495.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178 2018-01-23T12:11:35.161Z,1516709495.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:11:35.161Z,1516709495.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 178 2018-01-23T12:11:35.513Z,1516709495.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:35.552Z,1516709495.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:11:35.552Z,1516709495.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:11:35.553Z,1516709495.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:11:35.553Z,1516709495.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:11:35.553Z,1516709495.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:11:35.554Z,1516709495.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:11:35.914Z,1516709495.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:35.928Z,1516709495.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:11:35.929Z,1516709495.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:36.312Z,1516709496.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:36.332Z,1516709496.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:11:36.333Z,1516709496.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:36.731Z,1516709496.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:36.759Z,1516709496.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:11:36.760Z,1516709496.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:37.131Z,1516709497.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:37.153Z,1516709497.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:11:37.154Z,1516709497.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:37.535Z,1516709497.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:37.561Z,1516709497.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:11:37.562Z,1516709497.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:37.926Z,1516709497.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:37.962Z,1516709497.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:11:37.963Z,1516709497.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:38.318Z,1516709498.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:38.336Z,1516709498.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:11:38.337Z,1516709498.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:38.722Z,1516709498.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:38.736Z,1516709498.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:11:38.737Z,1516709498.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:39.118Z,1516709499.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:39.146Z,1516709499.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:11:39.151Z,1516709499.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:39.519Z,1516709499.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:39.538Z,1516709499.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:11:39.543Z,1516709499.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:39.929Z,1516709499.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:39.956Z,1516709499.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:11:39.957Z,1516709499.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:40.335Z,1516709500.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:40.350Z,1516709500.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:11:40.351Z,1516709500.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:40.726Z,1516709500.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:40.749Z,1516709500.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:11:40.750Z,1516709500.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:41.117Z,1516709501.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:41.145Z,1516709501.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:11:41.146Z,1516709501.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:41.514Z,1516709501.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:41.536Z,1516709501.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:11:41.537Z,1516709501.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:41.914Z,1516709501.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:41.941Z,1516709501.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:11:41.942Z,1516709501.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:42.312Z,1516709502.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:42.345Z,1516709502.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:11:42.346Z,1516709502.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:42.724Z,1516709502.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:42.764Z,1516709502.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:11:42.765Z,1516709502.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:43.128Z,1516709503.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:43.164Z,1516709503.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:11:43.165Z,1516709503.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:43.532Z,1516709503.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:43.557Z,1516709503.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:11:43.558Z,1516709503.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:43.924Z,1516709503.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:43.960Z,1516709503.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:11:43.961Z,1516709503.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:44.321Z,1516709504.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:44.336Z,1516709504.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:11:44.337Z,1516709504.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:44.718Z,1516709504.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:44.732Z,1516709504.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:11:44.733Z,1516709504.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:45.118Z,1516709505.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:45.151Z,1516709505.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:11:45.152Z,1516709505.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:45.522Z,1516709505.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:45.536Z,1516709505.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:11:45.537Z,1516709505.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:45.931Z,1516709505.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:45.968Z,1516709505.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:11:45.969Z,1516709505.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:46.331Z,1516709506.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:46.348Z,1516709506.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:11:46.349Z,1516709506.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:46.730Z,1516709506.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:46.744Z,1516709506.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:11:46.745Z,1516709506.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:47.120Z,1516709507.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:47.135Z,1516709507.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:11:47.136Z,1516709507.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:47.521Z,1516709507.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:47.535Z,1516709507.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:11:47.536Z,1516709507.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:47.920Z,1516709507.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:47.939Z,1516709507.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:11:47.940Z,1516709507.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:48.314Z,1516709508.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:48.341Z,1516709508.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:11:48.342Z,1516709508.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:48.735Z,1516709508.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:48.749Z,1516709508.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:11:48.750Z,1516709508.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:49.134Z,1516709509.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:49.149Z,1516709509.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:11:49.149Z,1516709509.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:49.528Z,1516709509.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:49.555Z,1516709509.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:11:49.556Z,1516709509.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:49.926Z,1516709509.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:49.941Z,1516709509.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:11:49.942Z,1516709509.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:50.323Z,1516709510.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:50.342Z,1516709510.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:11:50.343Z,1516709510.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:50.712Z,1516709510.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:50.738Z,1516709510.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:11:50.739Z,1516709510.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:51.113Z,1516709511.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:51.149Z,1516709511.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:11:51.150Z,1516709511.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:51.513Z,1516709511.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:51.548Z,1516709511.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:11:51.549Z,1516709511.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:51.931Z,1516709511.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:51.946Z,1516709511.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:11:51.947Z,1516709511.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:52.336Z,1516709512.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:52.356Z,1516709512.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:11:52.357Z,1516709512.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:52.731Z,1516709512.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:52.746Z,1516709512.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:11:52.747Z,1516709512.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:53.112Z,1516709513.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:53.144Z,1516709513.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:11:53.145Z,1516709513.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:53.529Z,1516709513.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:53.543Z,1516709513.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:11:53.544Z,1516709513.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:53.918Z,1516709513.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:53.943Z,1516709513.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:11:53.944Z,1516709513.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:54.313Z,1516709514.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:54.344Z,1516709514.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:11:54.345Z,1516709514.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:54.730Z,1516709514.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:54.753Z,1516709514.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:11:54.754Z,1516709514.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:55.134Z,1516709515.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:55.149Z,1516709515.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:55.528Z,1516709515.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:55.549Z,1516709515.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:55.912Z,1516709515.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:55.948Z,1516709515.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:56.313Z,1516709516.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:56.339Z,1516709516.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:56.712Z,1516709516.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:56.745Z,1516709516.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:57.113Z,1516709517.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:57.152Z,1516709517.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:57.517Z,1516709517.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:57.543Z,1516709517.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:57.927Z,1516709517.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:57.951Z,1516709517.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:58.334Z,1516709518.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:58.359Z,1516709518.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:58.731Z,1516709518.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:58.746Z,1516709518.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:59.112Z,1516709519.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:59.145Z,1516709519.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:59.517Z,1516709519.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:59.549Z,1516709519.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:11:59.917Z,1516709519.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:11:59.948Z,1516709519.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:00.312Z,1516709520.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:00.349Z,1516709520.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:00.723Z,1516709520.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:00.757Z,1516709520.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:01.139Z,1516709521.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:01.154Z,1516709521.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:01.523Z,1516709521.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:01.557Z,1516709521.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:01.913Z,1516709521.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:01.950Z,1516709521.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:02.317Z,1516709522.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:02.349Z,1516709522.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:02.712Z,1516709522.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:02.749Z,1516709522.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:03.119Z,1516709523.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:03.147Z,1516709523.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:03.517Z,1516709523.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:03.548Z,1516709523.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:03.924Z,1516709523.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:03.950Z,1516709523.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:04.335Z,1516709524.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:04.361Z,1516709524.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:04.740Z,1516709524.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:04.755Z,1516709524.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:05.113Z,1516709525.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:05.140Z,1516709525.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:05.513Z,1516709525.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:05.528Z,1516709525.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:05.914Z,1516709525.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:05.929Z,1516709525.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:06.321Z,1516709526.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:06.336Z,1516709526.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:06.732Z,1516709526.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:06.765Z,1516709526.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:07.136Z,1516709527.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:07.165Z,1516709527.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:07.536Z,1516709527.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:07.560Z,1516709527.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:07.924Z,1516709527.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:07.940Z,1516709527.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:08.321Z,1516709528.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:08.336Z,1516709528.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:08.718Z,1516709528.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:08.737Z,1516709528.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:09.117Z,1516709529.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:09.144Z,1516709529.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:09.517Z,1516709529.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:09.545Z,1516709529.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:09.935Z,1516709529.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:09.971Z,1516709529.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:10.331Z,1516709530.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:10.346Z,1516709530.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:10.726Z,1516709530.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:10.741Z,1516709530.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:11.119Z,1516709531.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:11.141Z,1516709531.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:11.521Z,1516709531.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:11.540Z,1516709531.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:11.925Z,1516709531.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:11.941Z,1516709531.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:12.314Z,1516709532.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:12.345Z,1516709532.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:12.731Z,1516709532.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:12.746Z,1516709532.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:13.134Z,1516709533.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:13.149Z,1516709533.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:13.528Z,1516709533.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:13.555Z,1516709533.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:13.926Z,1516709533.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:13.941Z,1516709533.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:14.313Z,1516709534.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:14.345Z,1516709534.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:14.712Z,1516709534.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:14.753Z,1516709534.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:15.113Z,1516709535.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:15.149Z,1516709535.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:15.523Z,1516709535.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:15.544Z,1516709535.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:15.939Z,1516709535.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:15.961Z,1516709535.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:16.340Z,1516709536.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:16.355Z,1516709536.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:16.732Z,1516709536.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:16.747Z,1516709536.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:17.113Z,1516709537.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:17.149Z,1516709537.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:17.528Z,1516709537.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:17.543Z,1516709537.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:17.914Z,1516709537.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:17.944Z,1516709537.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:18.334Z,1516709538.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:18.349Z,1516709538.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:18.735Z,1516709538.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:18.750Z,1516709538.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:19.128Z,1516709539.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:19.156Z,1516709539.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:19.537Z,1516709539.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:19.552Z,1516709539.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:19.931Z,1516709539.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:19.947Z,1516709539.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:20.310Z,1516709540.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:20.334Z,1516709540.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:20.712Z,1516709540.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:20.746Z,1516709540.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:21.113Z,1516709541.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:21.149Z,1516709541.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:21.521Z,1516709541.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:21.554Z,1516709541.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:21.923Z,1516709541.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:21.950Z,1516709541.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:22.344Z,1516709542.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:22.361Z,1516709542.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:22.724Z,1516709542.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:22.752Z,1516709542.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:23.125Z,1516709543.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:23.151Z,1516709543.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:23.512Z,1516709543.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:23.557Z,1516709543.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:23.917Z,1516709543.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:23.953Z,1516709543.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:24.317Z,1516709544.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:24.353Z,1516709544.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:24.738Z,1516709544.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:24.765Z,1516709544.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:27.831Z,1516709547.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:27.855Z,1516709547.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:27.963Z,1516709547.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:27.978Z,1516709547.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:28.307Z,1516709548.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:28.322Z,1516709548.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:28.714Z,1516709548.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:28.728Z,1516709548.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:29.110Z,1516709549.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:29.125Z,1516709549.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:29.506Z,1516709549.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:29.522Z,1516709549.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:29.909Z,1516709549.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:29.942Z,1516709549.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:30.316Z,1516709550.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:30.331Z,1516709550.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:30.723Z,1516709550.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:30.738Z,1516709550.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:31.108Z,1516709551.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:31.123Z,1516709551.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:31.516Z,1516709551.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:31.531Z,1516709551.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:31.908Z,1516709551.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:31.923Z,1516709551.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:32.309Z,1516709552.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:32.324Z,1516709552.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:32.715Z,1516709552.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:32.737Z,1516709552.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:33.118Z,1516709553.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:33.137Z,1516709553.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:33.515Z,1516709553.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:33.530Z,1516709553.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:33.914Z,1516709553.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:33.929Z,1516709553.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:34.300Z,1516709554.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:34.332Z,1516709554.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:34.719Z,1516709554.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:34.734Z,1516709554.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:35.119Z,1516709555.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:35.134Z,1516709555.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:35.522Z,1516709555.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:35.537Z,1516709555.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:35.897Z,1516709555.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:35.928Z,1516709555.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:36.297Z,1516709556.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:36.335Z,1516709556.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:36.717Z,1516709556.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:36.737Z,1516709556.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:37.120Z,1516709557.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:37.135Z,1516709557.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:37.513Z,1516709557.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:37.536Z,1516709557.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:37.897Z,1516709557.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:37.930Z,1516709557.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:38.299Z,1516709558.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:38.327Z,1516709558.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:38.718Z,1516709558.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:38.734Z,1516709558.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:39.118Z,1516709559.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:39.142Z,1516709559.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:39.519Z,1516709559.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:39.534Z,1516709559.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:39.900Z,1516709559.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:39.927Z,1516709559.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:40.298Z,1516709560.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:40.333Z,1516709560.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:40.720Z,1516709560.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:40.736Z,1516709560.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:41.129Z,1516709561.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:41.149Z,1516709561.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:41.522Z,1516709561.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:41.541Z,1516709561.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:41.900Z,1516709561.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:41.929Z,1516709561.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:42.297Z,1516709562.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:42.332Z,1516709562.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:42.712Z,1516709562.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:42.745Z,1516709562.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:43.126Z,1516709563.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:43.141Z,1516709563.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:43.521Z,1516709563.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:43.536Z,1516709563.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:43.897Z,1516709563.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:43.938Z,1516709563.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:44.295Z,1516709564.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:44.337Z,1516709564.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:44.710Z,1516709564.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:44.739Z,1516709564.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:45.116Z,1516709565.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:45.147Z,1516709565.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:45.506Z,1516709565.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:45.545Z,1516709565.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:45.897Z,1516709565.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:45.944Z,1516709565.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:46.295Z,1516709566.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:46.334Z,1516709566.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:46.709Z,1516709566.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:46.750Z,1516709566.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:47.119Z,1516709567.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:47.157Z,1516709567.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:47.523Z,1516709567.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:47.531Z,1516709567.531 [PNI_TCM](ERROR): CRC does not match. Expected:0x9346 got:0x44060 2018-01-23T12:12:47.557Z,1516709567.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:47.901Z,1516709567.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:47.931Z,1516709567.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:48.302Z,1516709568.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:48.322Z,1516709568.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x41298 got:0x7234 2018-01-23T12:12:48.349Z,1516709568.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:48.707Z,1516709568.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:48.753Z,1516709568.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:49.127Z,1516709569.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:49.135Z,1516709569.135 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T12:12:49.153Z,1516709569.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:49.522Z,1516709569.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:49.537Z,1516709569.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:49.898Z,1516709569.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:49.924Z,1516709569.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:50.296Z,1516709570.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:50.338Z,1516709570.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:50.711Z,1516709570.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:50.741Z,1516709570.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:51.112Z,1516709571.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:51.142Z,1516709571.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:51.517Z,1516709571.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:51.545Z,1516709571.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:51.905Z,1516709571.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:51.952Z,1516709571.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:52.308Z,1516709572.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:52.348Z,1516709572.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:52.711Z,1516709572.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:52.743Z,1516709572.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:53.121Z,1516709573.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:53.147Z,1516709573.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:53.519Z,1516709573.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:53.565Z,1516709573.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:53.904Z,1516709573.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:53.942Z,1516709573.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:54.308Z,1516709574.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:54.347Z,1516709574.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:54.713Z,1516709574.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:54.741Z,1516709574.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:55.119Z,1516709575.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:55.150Z,1516709575.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:55.515Z,1516709575.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:55.549Z,1516709575.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:55.908Z,1516709575.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:55.928Z,1516709575.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:56.308Z,1516709576.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:56.326Z,1516709576.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:56.709Z,1516709576.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:56.750Z,1516709576.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:57.113Z,1516709577.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:57.152Z,1516709577.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:57.512Z,1516709577.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:57.532Z,1516709577.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:57.902Z,1516709577.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:57.923Z,1516709577.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:58.304Z,1516709578.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:58.328Z,1516709578.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:58.702Z,1516709578.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:58.736Z,1516709578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:59.115Z,1516709579.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:59.136Z,1516709579.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:59.514Z,1516709579.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:59.538Z,1516709579.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:12:59.916Z,1516709579.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:12:59.942Z,1516709579.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:00.294Z,1516709580.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:00.325Z,1516709580.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:00.708Z,1516709580.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:00.729Z,1516709580.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:01.097Z,1516709581.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:01.129Z,1516709581.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:01.496Z,1516709581.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:01.533Z,1516709581.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:01.920Z,1516709581.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:01.935Z,1516709581.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:02.320Z,1516709582.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:02.339Z,1516709582.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:02.711Z,1516709582.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:02.749Z,1516709582.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:03.096Z,1516709583.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:03.128Z,1516709583.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:03.496Z,1516709583.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:03.534Z,1516709583.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:03.897Z,1516709583.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:03.929Z,1516709583.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:04.297Z,1516709584.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:04.333Z,1516709584.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:04.696Z,1516709584.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:04.734Z,1516709584.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:05.115Z,1516709585.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:05.130Z,1516709585.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:05.518Z,1516709585.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:05.536Z,1516709585.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:05.906Z,1516709585.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:05.937Z,1516709585.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:06.294Z,1516709586.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:06.317Z,1516709586.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:06.696Z,1516709586.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:06.738Z,1516709586.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:07.097Z,1516709587.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:07.132Z,1516709587.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:07.496Z,1516709587.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:07.534Z,1516709587.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:07.907Z,1516709587.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:07.942Z,1516709587.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:08.311Z,1516709588.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:08.347Z,1516709588.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:08.707Z,1516709588.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:08.739Z,1516709588.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:09.104Z,1516709589.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:09.141Z,1516709589.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:09.501Z,1516709589.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:09.516Z,1516709589.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:09.902Z,1516709589.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:09.921Z,1516709589.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:10.302Z,1516709590.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:10.321Z,1516709590.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:10.704Z,1516709590.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:10.719Z,1516709590.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:11.108Z,1516709591.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:11.123Z,1516709591.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:11.515Z,1516709591.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:11.530Z,1516709591.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:11.919Z,1516709591.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:11.958Z,1516709591.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:12.302Z,1516709592.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:12.317Z,1516709592.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:12.702Z,1516709592.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:12.726Z,1516709592.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:13.106Z,1516709593.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:13.121Z,1516709593.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:13.504Z,1516709593.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:13.519Z,1516709593.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:13.909Z,1516709593.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:13.929Z,1516709593.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:14.311Z,1516709594.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:14.326Z,1516709594.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:14.709Z,1516709594.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:14.729Z,1516709594.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:15.104Z,1516709595.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:15.119Z,1516709595.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:15.505Z,1516709595.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:15.520Z,1516709595.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:15.904Z,1516709595.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:15.920Z,1516709595.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:16.304Z,1516709596.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:16.322Z,1516709596.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:16.705Z,1516709596.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:16.720Z,1516709596.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:17.109Z,1516709597.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:17.129Z,1516709597.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:17.511Z,1516709597.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:17.526Z,1516709597.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:17.911Z,1516709597.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:17.932Z,1516709597.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:18.301Z,1516709598.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:18.320Z,1516709598.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:18.704Z,1516709598.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:18.719Z,1516709598.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:19.106Z,1516709599.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:19.121Z,1516709599.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:19.505Z,1516709599.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:19.520Z,1516709599.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:19.910Z,1516709599.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:19.925Z,1516709599.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:20.311Z,1516709600.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:20.326Z,1516709600.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:20.710Z,1516709600.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:20.725Z,1516709600.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:21.101Z,1516709601.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:21.123Z,1516709601.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:21.506Z,1516709601.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:21.521Z,1516709601.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:21.904Z,1516709601.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:21.923Z,1516709601.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:22.301Z,1516709602.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:22.324Z,1516709602.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:22.705Z,1516709602.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:22.720Z,1516709602.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:23.110Z,1516709603.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:23.125Z,1516709603.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:23.512Z,1516709603.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:23.527Z,1516709603.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:23.910Z,1516709603.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:23.926Z,1516709603.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:23.929Z,1516709603.929 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:13:23.929Z,1516709603.929 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:13:23.929Z,1516709603.929 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:13:23.929Z,1516709603.929 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:13:24.300Z,1516709604.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:24.332Z,1516709604.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:24.336Z,1516709604.336 [Default:CheckIn:D] Stopped 2018-01-23T12:13:24.336Z,1516709604.336 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:13:24.699Z,1516709604.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:24.732Z,1516709604.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:24.736Z,1516709604.736 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 535.537923 min 2018-01-23T12:13:24.736Z,1516709604.736 [Default:CheckIn:E] Stopped 2018-01-23T12:13:24.736Z,1516709604.736 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:13:24.736Z,1516709604.736 [Default:CheckIn] Stopped 2018-01-23T12:13:24.737Z,1516709604.737 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:13:24.737Z,1516709604.737 [Default:CheckIn](INFO): Running loop #53 2018-01-23T12:13:24.737Z,1516709604.737 [Default:CheckIn] Running Loop=53 2018-01-23T12:13:24.737Z,1516709604.737 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:13:24.737Z,1516709604.737 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:13:25.098Z,1516709605.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:25.133Z,1516709605.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:28.193Z,1516709608.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:28.217Z,1516709608.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:28.292Z,1516709608.292 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:13:28.293Z,1516709608.293 [NAL9602] Data Fault, FailCount= 4 2018-01-23T12:13:28.293Z,1516709608.293 [NAL9602](ERROR): Data Fault 2018-01-23T12:13:28.317Z,1516709608.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:28.361Z,1516709608.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:28.376Z,1516709608.376 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:13:28.658Z,1516709608.658 [NAL9602](INFO): Powering down 2018-01-23T12:13:28.675Z,1516709608.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:28.690Z,1516709608.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:29.074Z,1516709609.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:29.088Z,1516709609.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:29.465Z,1516709609.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:29.488Z,1516709609.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:29.510Z,1516709609.510 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:13:29.510Z,1516709609.510 [NAL9602] No Fault, FailCount= 4 2018-01-23T12:13:29.869Z,1516709609.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:29.888Z,1516709609.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:30.271Z,1516709610.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:30.286Z,1516709610.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:30.669Z,1516709610.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:30.685Z,1516709610.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:31.070Z,1516709611.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:31.085Z,1516709611.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:31.470Z,1516709611.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:31.485Z,1516709611.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:31.868Z,1516709611.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:31.889Z,1516709611.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:32.265Z,1516709612.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:32.288Z,1516709612.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:32.670Z,1516709612.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:32.689Z,1516709612.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:33.060Z,1516709613.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:33.092Z,1516709613.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:33.473Z,1516709613.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:33.488Z,1516709613.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:33.869Z,1516709613.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:33.883Z,1516709613.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:34.268Z,1516709614.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:34.284Z,1516709614.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:34.668Z,1516709614.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:34.689Z,1516709614.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:35.068Z,1516709615.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:35.084Z,1516709615.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:35.468Z,1516709615.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:35.484Z,1516709615.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:35.876Z,1516709615.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:35.891Z,1516709615.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:36.268Z,1516709616.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:36.283Z,1516709616.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:36.668Z,1516709616.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:36.683Z,1516709616.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:37.062Z,1516709617.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:37.095Z,1516709617.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:37.468Z,1516709617.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:37.483Z,1516709617.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:37.868Z,1516709617.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:37.883Z,1516709617.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:38.262Z,1516709618.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:38.295Z,1516709618.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:38.675Z,1516709618.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:38.690Z,1516709618.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:39.065Z,1516709619.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:39.080Z,1516709619.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:39.468Z,1516709619.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:39.483Z,1516709619.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:39.868Z,1516709619.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:39.882Z,1516709619.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:40.268Z,1516709620.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:40.283Z,1516709620.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:40.692Z,1516709620.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:40.723Z,1516709620.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:41.068Z,1516709621.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:41.083Z,1516709621.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:41.468Z,1516709621.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:41.483Z,1516709621.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:41.864Z,1516709621.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:41.887Z,1516709621.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:42.268Z,1516709622.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:42.288Z,1516709622.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:42.668Z,1516709622.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:42.683Z,1516709622.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:43.063Z,1516709623.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:43.085Z,1516709623.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:43.469Z,1516709623.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:43.488Z,1516709623.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:43.872Z,1516709623.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:43.887Z,1516709623.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:44.264Z,1516709624.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:44.289Z,1516709624.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:44.668Z,1516709624.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:44.688Z,1516709624.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:45.058Z,1516709625.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:45.089Z,1516709625.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:45.472Z,1516709625.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:45.490Z,1516709625.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:45.860Z,1516709625.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:45.895Z,1516709625.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:46.258Z,1516709626.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:46.289Z,1516709626.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:46.660Z,1516709626.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:46.686Z,1516709626.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:47.060Z,1516709627.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:47.095Z,1516709627.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:47.463Z,1516709627.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:47.489Z,1516709627.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:47.876Z,1516709627.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:47.897Z,1516709627.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:48.260Z,1516709628.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:48.292Z,1516709628.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:48.658Z,1516709628.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:48.693Z,1516709628.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:49.059Z,1516709629.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:49.086Z,1516709629.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:49.460Z,1516709629.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:49.494Z,1516709629.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:49.860Z,1516709629.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:49.892Z,1516709629.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:50.260Z,1516709630.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:50.296Z,1516709630.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:50.660Z,1516709630.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:50.697Z,1516709630.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:51.058Z,1516709631.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:51.073Z,1516709631.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:51.459Z,1516709631.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:51.474Z,1516709631.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:51.860Z,1516709631.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:51.875Z,1516709631.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:52.258Z,1516709632.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:52.285Z,1516709632.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:52.669Z,1516709632.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:52.685Z,1516709632.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:53.067Z,1516709633.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:53.088Z,1516709633.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:53.468Z,1516709633.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:53.483Z,1516709633.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:53.866Z,1516709633.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:53.898Z,1516709633.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:54.271Z,1516709634.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:54.286Z,1516709634.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:54.665Z,1516709634.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:54.681Z,1516709634.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:55.068Z,1516709635.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:55.083Z,1516709635.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:55.468Z,1516709635.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:55.483Z,1516709635.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:55.868Z,1516709635.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:55.883Z,1516709635.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:56.274Z,1516709636.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:56.289Z,1516709636.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:56.669Z,1516709636.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:56.688Z,1516709636.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:57.069Z,1516709637.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:57.084Z,1516709637.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:57.474Z,1516709637.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:57.490Z,1516709637.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:57.869Z,1516709637.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:57.884Z,1516709637.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:58.264Z,1516709638.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:58.284Z,1516709638.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:58.660Z,1516709638.660 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:13:58.678Z,1516709638.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:58.696Z,1516709638.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:59.068Z,1516709639.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:59.083Z,1516709639.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:59.468Z,1516709639.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:59.484Z,1516709639.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:13:59.864Z,1516709639.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:13:59.897Z,1516709639.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:00.272Z,1516709640.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:00.288Z,1516709640.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:00.668Z,1516709640.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:00.683Z,1516709640.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:01.062Z,1516709641.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:01.095Z,1516709641.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:01.468Z,1516709641.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:01.482Z,1516709641.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:01.868Z,1516709641.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:01.883Z,1516709641.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:02.264Z,1516709642.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:02.286Z,1516709642.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:02.668Z,1516709642.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:02.683Z,1516709642.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:03.064Z,1516709643.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:03.084Z,1516709643.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:03.462Z,1516709643.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:03.494Z,1516709643.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:03.868Z,1516709643.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:03.883Z,1516709643.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:04.268Z,1516709644.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:04.284Z,1516709644.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:04.682Z,1516709644.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:04.697Z,1516709644.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:05.068Z,1516709645.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:05.083Z,1516709645.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:05.468Z,1516709645.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:05.483Z,1516709645.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:05.864Z,1516709645.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:05.887Z,1516709645.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:06.268Z,1516709646.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:06.283Z,1516709646.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:06.668Z,1516709646.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:06.683Z,1516709646.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:07.076Z,1516709647.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:07.091Z,1516709647.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:07.470Z,1516709647.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:07.492Z,1516709647.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:07.872Z,1516709647.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:07.888Z,1516709647.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:08.264Z,1516709648.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:08.289Z,1516709648.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:08.668Z,1516709648.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:08.697Z,1516709648.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:09.068Z,1516709649.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:09.090Z,1516709649.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:09.480Z,1516709649.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:09.495Z,1516709649.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:09.844Z,1516709649.844 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:14:09.864Z,1516709649.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:09.905Z,1516709649.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:10.273Z,1516709650.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:10.289Z,1516709650.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:10.688Z,1516709650.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:10.709Z,1516709650.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:11.084Z,1516709651.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:11.100Z,1516709651.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:11.480Z,1516709651.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:11.496Z,1516709651.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:11.861Z,1516709651.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:11.889Z,1516709651.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:12.261Z,1516709652.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:12.298Z,1516709652.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:12.666Z,1516709652.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:12.694Z,1516709652.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:13.060Z,1516709653.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:13.101Z,1516709653.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:13.476Z,1516709653.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:13.509Z,1516709653.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:13.876Z,1516709653.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:13.915Z,1516709653.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:14.275Z,1516709654.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:14.303Z,1516709654.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:14.660Z,1516709654.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:14.701Z,1516709654.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:15.064Z,1516709655.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:15.079Z,1516709655.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:15.472Z,1516709655.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:15.507Z,1516709655.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:15.864Z,1516709655.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:15.885Z,1516709655.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:16.267Z,1516709656.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:16.282Z,1516709656.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:16.675Z,1516709656.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:16.690Z,1516709656.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:17.075Z,1516709657.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:17.090Z,1516709657.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:17.471Z,1516709657.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:17.486Z,1516709657.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:17.867Z,1516709657.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:17.882Z,1516709657.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:18.268Z,1516709658.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:18.283Z,1516709658.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:18.668Z,1516709658.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:18.683Z,1516709658.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:19.068Z,1516709659.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:19.088Z,1516709659.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:19.483Z,1516709659.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:19.519Z,1516709659.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:19.879Z,1516709659.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:19.894Z,1516709659.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:20.274Z,1516709660.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:20.297Z,1516709660.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:20.672Z,1516709660.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:20.688Z,1516709660.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:21.068Z,1516709661.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:21.083Z,1516709661.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:21.469Z,1516709661.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:21.483Z,1516709661.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:21.869Z,1516709661.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:21.884Z,1516709661.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:22.266Z,1516709662.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:22.286Z,1516709662.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:22.674Z,1516709662.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:22.689Z,1516709662.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:23.075Z,1516709663.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:23.091Z,1516709663.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:23.473Z,1516709663.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:23.489Z,1516709663.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:23.869Z,1516709663.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:23.884Z,1516709663.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:24.268Z,1516709664.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:24.284Z,1516709664.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:24.669Z,1516709664.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:24.684Z,1516709664.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:25.063Z,1516709665.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:25.097Z,1516709665.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:25.475Z,1516709665.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:25.491Z,1516709665.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:28.624Z,1516709668.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:28.639Z,1516709668.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:28.668Z,1516709668.668 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:14:28.765Z,1516709668.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:28.801Z,1516709668.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:29.101Z,1516709669.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:29.127Z,1516709669.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:29.501Z,1516709669.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:29.528Z,1516709669.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:29.898Z,1516709669.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:29.933Z,1516709669.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:30.297Z,1516709670.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:30.327Z,1516709670.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:30.720Z,1516709670.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:30.736Z,1516709670.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:31.107Z,1516709671.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:31.141Z,1516709671.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:31.519Z,1516709671.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:31.534Z,1516709671.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:31.897Z,1516709671.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:31.934Z,1516709671.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:32.300Z,1516709672.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:32.333Z,1516709672.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:32.697Z,1516709672.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:32.728Z,1516709672.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:33.100Z,1516709673.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:33.141Z,1516709673.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:33.511Z,1516709673.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:33.538Z,1516709673.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:33.911Z,1516709673.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:33.945Z,1516709673.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:34.307Z,1516709674.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:34.335Z,1516709674.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:34.697Z,1516709674.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:34.733Z,1516709674.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.100Z,1516709675.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:35.137Z,1516709675.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.504Z,1516709675.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:35.520Z,1516709675.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.522Z,1516709675.522 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.522Z,1516709675.522 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179 2018-01-23T12:14:35.522Z,1516709675.522 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:14:35.579Z,1516709675.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:14:35.906Z,1516709675.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:35.921Z,1516709675.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.921Z,1516709675.921 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179 2018-01-23T12:14:35.921Z,1516709675.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:14:35.923Z,1516709675.923 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:35.923Z,1516709675.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 179 2018-01-23T12:14:35.923Z,1516709675.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:14:35.960Z,1516709675.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:14:35.960Z,1516709675.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:14:35.960Z,1516709675.960 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:14:35.960Z,1516709675.960 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179 2018-01-23T12:14:36.300Z,1516709676.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:36.318Z,1516709676.318 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:14:36.318Z,1516709676.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:14:36.323Z,1516709676.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:14:36.343Z,1516709676.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:14:36.343Z,1516709676.343 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179 2018-01-23T12:14:36.343Z,1516709676.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:14:36.343Z,1516709676.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 179 2018-01-23T12:14:36.716Z,1516709676.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:36.730Z,1516709676.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:14:36.730Z,1516709676.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:14:36.731Z,1516709676.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:14:36.731Z,1516709676.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:14:36.731Z,1516709676.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:14:36.732Z,1516709676.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:14:37.115Z,1516709677.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:37.138Z,1516709677.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:14:37.143Z,1516709677.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:37.516Z,1516709677.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:37.531Z,1516709677.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:14:37.532Z,1516709677.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:37.897Z,1516709677.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:37.932Z,1516709677.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:14:37.933Z,1516709677.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:38.294Z,1516709678.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:38.322Z,1516709678.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:14:38.324Z,1516709678.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:38.698Z,1516709678.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:38.724Z,1516709678.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:14:38.725Z,1516709678.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:39.097Z,1516709679.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:39.130Z,1516709679.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:14:39.131Z,1516709679.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:39.514Z,1516709679.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:39.536Z,1516709679.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:14:39.537Z,1516709679.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:39.920Z,1516709679.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:39.935Z,1516709679.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:14:39.936Z,1516709679.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:40.317Z,1516709680.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:40.331Z,1516709680.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:14:40.332Z,1516709680.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:40.694Z,1516709680.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:40.733Z,1516709680.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:14:40.734Z,1516709680.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:41.100Z,1516709681.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:41.132Z,1516709681.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:14:41.133Z,1516709681.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:41.497Z,1516709681.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:41.534Z,1516709681.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:14:41.535Z,1516709681.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:41.898Z,1516709681.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:41.925Z,1516709681.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:14:41.925Z,1516709681.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:42.296Z,1516709682.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:42.329Z,1516709682.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:14:42.330Z,1516709682.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:42.720Z,1516709682.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:42.735Z,1516709682.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:14:42.736Z,1516709682.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:43.107Z,1516709683.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:43.145Z,1516709683.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:14:43.146Z,1516709683.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:43.508Z,1516709683.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:43.544Z,1516709683.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:14:43.545Z,1516709683.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:43.900Z,1516709683.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:43.941Z,1516709683.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:14:43.942Z,1516709683.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:44.294Z,1516709684.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:44.309Z,1516709684.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:14:44.310Z,1516709684.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:44.697Z,1516709684.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:44.712Z,1516709684.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:14:44.713Z,1516709684.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:45.101Z,1516709685.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:45.120Z,1516709685.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:14:45.121Z,1516709685.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:45.508Z,1516709685.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:45.522Z,1516709685.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:14:45.539Z,1516709685.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:45.919Z,1516709685.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:45.943Z,1516709685.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:14:45.944Z,1516709685.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:46.319Z,1516709686.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:46.344Z,1516709686.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:14:46.345Z,1516709686.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:46.701Z,1516709686.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:46.720Z,1516709686.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:14:46.721Z,1516709686.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:47.102Z,1516709687.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:47.129Z,1516709687.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:14:47.130Z,1516709687.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:47.506Z,1516709687.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:47.520Z,1516709687.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:14:47.521Z,1516709687.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:47.904Z,1516709687.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:47.919Z,1516709687.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:14:47.920Z,1516709687.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:48.304Z,1516709688.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:48.319Z,1516709688.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:14:48.320Z,1516709688.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:48.707Z,1516709688.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:48.722Z,1516709688.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:14:48.723Z,1516709688.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:49.107Z,1516709689.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:49.122Z,1516709689.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:14:49.123Z,1516709689.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:49.508Z,1516709689.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:49.522Z,1516709689.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:14:49.523Z,1516709689.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:49.905Z,1516709689.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:49.924Z,1516709689.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:14:49.925Z,1516709689.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:50.301Z,1516709690.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:50.322Z,1516709690.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:14:50.323Z,1516709690.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:50.702Z,1516709690.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:50.720Z,1516709690.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:14:50.721Z,1516709690.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:51.106Z,1516709691.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:51.121Z,1516709691.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:14:51.122Z,1516709691.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:51.512Z,1516709691.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:51.527Z,1516709691.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:14:51.528Z,1516709691.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:51.912Z,1516709691.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:51.926Z,1516709691.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:14:51.927Z,1516709691.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:52.312Z,1516709692.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:52.327Z,1516709692.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:14:52.328Z,1516709692.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:52.702Z,1516709692.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:52.732Z,1516709692.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:14:52.733Z,1516709692.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:53.114Z,1516709693.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:53.132Z,1516709693.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:14:53.133Z,1516709693.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:53.506Z,1516709693.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:53.521Z,1516709693.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:14:53.522Z,1516709693.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:53.902Z,1516709693.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:53.925Z,1516709693.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:14:53.926Z,1516709693.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:54.301Z,1516709694.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:54.324Z,1516709694.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:14:54.325Z,1516709694.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:54.717Z,1516709694.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:54.732Z,1516709694.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:14:54.733Z,1516709694.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:55.113Z,1516709695.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:55.136Z,1516709695.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:14:55.137Z,1516709695.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:55.515Z,1516709695.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:55.531Z,1516709695.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:14:55.532Z,1516709695.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:55.903Z,1516709695.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:55.925Z,1516709695.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:56.300Z,1516709696.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:56.338Z,1516709696.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:56.710Z,1516709696.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:56.726Z,1516709696.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:57.104Z,1516709697.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:57.125Z,1516709697.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:57.516Z,1516709697.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:57.531Z,1516709697.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:57.919Z,1516709697.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:57.935Z,1516709697.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:58.310Z,1516709698.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:58.334Z,1516709698.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:58.700Z,1516709698.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:58.726Z,1516709698.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:59.096Z,1516709699.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:59.122Z,1516709699.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:59.496Z,1516709699.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:59.530Z,1516709699.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:14:59.897Z,1516709699.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:14:59.924Z,1516709699.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:00.300Z,1516709700.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:00.333Z,1516709700.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:00.721Z,1516709700.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:00.736Z,1516709700.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:01.107Z,1516709701.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:01.142Z,1516709701.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:01.508Z,1516709701.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:01.545Z,1516709701.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:01.900Z,1516709701.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:01.941Z,1516709701.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:02.294Z,1516709702.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:02.309Z,1516709702.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:02.697Z,1516709702.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:02.713Z,1516709702.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:03.101Z,1516709703.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:03.120Z,1516709703.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:03.512Z,1516709703.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:03.547Z,1516709703.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:03.916Z,1516709703.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:03.930Z,1516709703.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:04.307Z,1516709704.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:04.322Z,1516709704.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:04.700Z,1516709704.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:04.729Z,1516709704.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:05.107Z,1516709705.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:05.122Z,1516709705.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:05.505Z,1516709705.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:05.520Z,1516709705.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:05.905Z,1516709705.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:05.920Z,1516709705.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:06.304Z,1516709706.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:06.319Z,1516709706.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:06.710Z,1516709706.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:06.726Z,1516709706.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:07.109Z,1516709707.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:07.125Z,1516709707.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:07.512Z,1516709707.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:07.527Z,1516709707.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:07.905Z,1516709707.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:07.920Z,1516709707.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:08.300Z,1516709708.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:08.320Z,1516709708.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:08.701Z,1516709708.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:08.733Z,1516709708.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:09.109Z,1516709709.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:09.124Z,1516709709.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:09.518Z,1516709709.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:09.533Z,1516709709.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:09.918Z,1516709709.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:09.933Z,1516709709.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:10.316Z,1516709710.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:10.331Z,1516709710.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:10.700Z,1516709710.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:10.722Z,1516709710.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:11.100Z,1516709711.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:11.122Z,1516709711.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:11.506Z,1516709711.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:11.521Z,1516709711.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:11.905Z,1516709711.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:11.921Z,1516709711.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:12.300Z,1516709712.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:12.325Z,1516709712.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:12.716Z,1516709712.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:12.731Z,1516709712.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:13.115Z,1516709713.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:13.130Z,1516709713.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:13.515Z,1516709713.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:13.530Z,1516709713.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:13.905Z,1516709713.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:13.920Z,1516709713.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:14.304Z,1516709714.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:14.323Z,1516709714.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:14.699Z,1516709714.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:14.733Z,1516709714.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:15.100Z,1516709715.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:15.127Z,1516709715.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:15.516Z,1516709715.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:15.531Z,1516709715.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:15.916Z,1516709715.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:15.943Z,1516709715.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:16.320Z,1516709716.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:16.340Z,1516709716.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:16.696Z,1516709716.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:16.729Z,1516709716.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:17.096Z,1516709717.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:17.129Z,1516709717.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:17.501Z,1516709717.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:17.535Z,1516709717.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:17.898Z,1516709717.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:17.933Z,1516709717.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:18.297Z,1516709718.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:18.333Z,1516709718.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:18.707Z,1516709718.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:18.742Z,1516709718.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:19.108Z,1516709719.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:19.141Z,1516709719.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:19.508Z,1516709719.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:19.541Z,1516709719.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:19.897Z,1516709719.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:19.937Z,1516709719.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:20.294Z,1516709720.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:20.310Z,1516709720.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:20.697Z,1516709720.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:20.713Z,1516709720.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:21.108Z,1516709721.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:21.145Z,1516709721.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:21.507Z,1516709721.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:21.539Z,1516709721.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:21.915Z,1516709721.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:21.947Z,1516709721.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:22.319Z,1516709722.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:22.353Z,1516709722.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:22.697Z,1516709722.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:22.717Z,1516709722.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:23.108Z,1516709723.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:23.149Z,1516709723.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:23.502Z,1516709723.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:23.525Z,1516709723.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:23.906Z,1516709723.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:23.921Z,1516709723.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:24.305Z,1516709724.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:24.321Z,1516709724.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:24.708Z,1516709724.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:24.723Z,1516709724.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:25.112Z,1516709725.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:25.126Z,1516709725.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:25.520Z,1516709725.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:25.534Z,1516709725.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:28.664Z,1516709728.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:28.681Z,1516709728.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:28.777Z,1516709728.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:28.820Z,1516709728.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:29.179Z,1516709729.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:29.213Z,1516709729.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:29.587Z,1516709729.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:29.620Z,1516709729.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:29.983Z,1516709729.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:30.010Z,1516709730.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:30.370Z,1516709730.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:30.389Z,1516709730.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:30.774Z,1516709730.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:30.789Z,1516709730.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:31.170Z,1516709731.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:31.197Z,1516709731.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:31.580Z,1516709731.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:31.601Z,1516709731.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:31.983Z,1516709731.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:31.998Z,1516709731.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:32.382Z,1516709732.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:32.397Z,1516709732.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:32.772Z,1516709732.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:32.793Z,1516709732.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:33.169Z,1516709733.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:33.192Z,1516709733.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:33.568Z,1516709733.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:33.593Z,1516709733.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:33.972Z,1516709733.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:33.992Z,1516709733.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:34.368Z,1516709734.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:34.405Z,1516709734.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:34.787Z,1516709734.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:34.802Z,1516709734.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:35.186Z,1516709735.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:35.201Z,1516709735.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:35.591Z,1516709735.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:35.607Z,1516709735.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:35.981Z,1516709735.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:36.001Z,1516709736.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:36.365Z,1516709736.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:36.400Z,1516709736.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:36.770Z,1516709736.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:36.799Z,1516709736.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:37.165Z,1516709737.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:37.201Z,1516709737.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:37.580Z,1516709737.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:37.613Z,1516709737.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:37.983Z,1516709737.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:38.021Z,1516709738.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:38.393Z,1516709738.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:38.413Z,1516709738.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:38.773Z,1516709738.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:38.807Z,1516709738.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:39.169Z,1516709739.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:39.207Z,1516709739.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:39.565Z,1516709739.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:39.581Z,1516709739.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:39.970Z,1516709739.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:39.986Z,1516709739.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:40.373Z,1516709740.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:40.389Z,1516709740.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:40.780Z,1516709740.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:40.814Z,1516709740.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:41.187Z,1516709741.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:41.219Z,1516709741.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:41.580Z,1516709741.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:41.595Z,1516709741.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:41.972Z,1516709741.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:41.987Z,1516709741.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:42.377Z,1516709742.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:42.393Z,1516709742.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:42.774Z,1516709742.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:42.790Z,1516709742.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:43.172Z,1516709743.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:43.188Z,1516709743.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:43.577Z,1516709743.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:43.597Z,1516709743.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:43.983Z,1516709743.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:44.001Z,1516709744.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:44.382Z,1516709744.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:44.397Z,1516709744.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:44.772Z,1516709744.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:44.793Z,1516709744.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:45.173Z,1516709745.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:45.188Z,1516709745.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:45.575Z,1516709745.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:45.590Z,1516709745.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:45.969Z,1516709745.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:45.996Z,1516709745.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:46.377Z,1516709746.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:46.392Z,1516709746.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:46.783Z,1516709746.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:46.798Z,1516709746.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:47.187Z,1516709747.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:47.202Z,1516709747.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:47.584Z,1516709747.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:47.599Z,1516709747.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:47.967Z,1516709747.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:47.993Z,1516709747.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:48.371Z,1516709748.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:48.402Z,1516709748.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:48.774Z,1516709748.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:48.789Z,1516709748.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:49.168Z,1516709749.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:49.193Z,1516709749.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:49.582Z,1516709749.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:49.597Z,1516709749.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:49.986Z,1516709749.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:50.001Z,1516709750.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:50.383Z,1516709750.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:50.398Z,1516709750.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:50.776Z,1516709750.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:50.791Z,1516709750.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:51.174Z,1516709751.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:51.196Z,1516709751.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:51.567Z,1516709751.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:51.599Z,1516709751.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:51.972Z,1516709751.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:51.992Z,1516709751.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:52.374Z,1516709752.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:52.396Z,1516709752.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:52.786Z,1516709752.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:52.801Z,1516709752.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:53.186Z,1516709753.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:53.205Z,1516709753.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:53.584Z,1516709753.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:53.598Z,1516709753.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:53.968Z,1516709753.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:53.990Z,1516709753.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:54.371Z,1516709754.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:54.390Z,1516709754.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:54.774Z,1516709754.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:54.796Z,1516709754.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:55.168Z,1516709755.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:55.190Z,1516709755.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:55.582Z,1516709755.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:55.598Z,1516709755.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:55.986Z,1516709755.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:56.008Z,1516709756.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:56.387Z,1516709756.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:56.405Z,1516709756.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:56.776Z,1516709756.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:56.797Z,1516709756.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:57.174Z,1516709757.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:57.196Z,1516709757.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:57.576Z,1516709757.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:57.597Z,1516709757.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:57.969Z,1516709757.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:57.991Z,1516709757.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:58.374Z,1516709758.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:58.389Z,1516709758.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:58.783Z,1516709758.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:58.805Z,1516709758.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:59.185Z,1516709759.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:59.201Z,1516709759.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:59.584Z,1516709759.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:59.598Z,1516709759.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:15:59.972Z,1516709759.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:15:59.990Z,1516709759.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:00.367Z,1516709760.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:00.399Z,1516709760.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:00.774Z,1516709760.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:00.789Z,1516709760.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:01.168Z,1516709761.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:01.191Z,1516709761.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:01.582Z,1516709761.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:01.598Z,1516709761.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:01.988Z,1516709761.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:02.032Z,1516709762.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:02.393Z,1516709762.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:02.424Z,1516709762.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:02.776Z,1516709762.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:02.805Z,1516709762.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:03.188Z,1516709763.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:03.216Z,1516709763.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:03.603Z,1516709763.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:03.631Z,1516709763.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:03.982Z,1516709763.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:04.026Z,1516709764.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:04.374Z,1516709764.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:04.438Z,1516709764.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:04.808Z,1516709764.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:04.841Z,1516709764.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:05.191Z,1516709765.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:05.216Z,1516709765.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:05.611Z,1516709765.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:05.626Z,1516709765.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:05.972Z,1516709765.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:05.987Z,1516709765.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:06.410Z,1516709766.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:06.426Z,1516709766.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:06.773Z,1516709766.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:06.792Z,1516709766.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:07.174Z,1516709767.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:07.189Z,1516709767.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:07.575Z,1516709767.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:07.591Z,1516709767.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:07.981Z,1516709767.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:08.020Z,1516709768.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:08.389Z,1516709768.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:08.422Z,1516709768.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:08.778Z,1516709768.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:08.818Z,1516709768.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:09.175Z,1516709769.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:09.235Z,1516709769.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:09.595Z,1516709769.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:09.628Z,1516709769.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:09.979Z,1516709769.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:10.005Z,1516709770.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:10.370Z,1516709770.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:10.417Z,1516709770.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:10.796Z,1516709770.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:10.818Z,1516709770.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:11.192Z,1516709771.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:11.252Z,1516709771.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:11.577Z,1516709771.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:11.644Z,1516709771.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:11.971Z,1516709771.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:12.006Z,1516709772.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:12.378Z,1516709772.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:12.417Z,1516709772.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:12.771Z,1516709772.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:12.842Z,1516709772.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:13.172Z,1516709773.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:13.219Z,1516709773.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:13.594Z,1516709773.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:13.677Z,1516709773.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:14.008Z,1516709774.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:14.036Z,1516709774.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:14.385Z,1516709774.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:14.425Z,1516709774.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:14.785Z,1516709774.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:14.839Z,1516709774.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:15.186Z,1516709775.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:15.244Z,1516709775.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:15.574Z,1516709775.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:15.618Z,1516709775.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:15.984Z,1516709775.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:16.003Z,1516709776.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:16.378Z,1516709776.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:16.419Z,1516709776.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:16.788Z,1516709776.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:16.813Z,1516709776.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:17.202Z,1516709777.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:17.225Z,1516709777.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:17.582Z,1516709777.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:17.647Z,1516709777.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:17.971Z,1516709777.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:18.014Z,1516709778.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:18.370Z,1516709778.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:18.410Z,1516709778.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:18.779Z,1516709778.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:18.844Z,1516709778.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:19.172Z,1516709779.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:19.219Z,1516709779.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:19.581Z,1516709779.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:19.620Z,1516709779.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:19.982Z,1516709779.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:20.036Z,1516709780.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:20.380Z,1516709780.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:20.425Z,1516709780.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:20.777Z,1516709780.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:20.844Z,1516709780.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:21.180Z,1516709781.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:21.230Z,1516709781.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:21.578Z,1516709781.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:21.633Z,1516709781.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:21.978Z,1516709781.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:21.993Z,1516709781.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:22.378Z,1516709782.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:22.404Z,1516709782.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:22.783Z,1516709782.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:22.798Z,1516709782.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:23.186Z,1516709783.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:23.201Z,1516709783.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:23.581Z,1516709783.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:23.607Z,1516709783.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:23.962Z,1516709783.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:23.997Z,1516709783.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:24.364Z,1516709784.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:24.399Z,1516709784.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:24.765Z,1516709784.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:24.801Z,1516709784.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:25.163Z,1516709785.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:25.197Z,1516709785.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:25.580Z,1516709785.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:25.607Z,1516709785.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:28.692Z,1516709788.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:28.707Z,1516709788.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:28.815Z,1516709788.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:28.857Z,1516709788.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:29.187Z,1516709789.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:29.202Z,1516709789.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:29.592Z,1516709789.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:29.607Z,1516709789.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:29.990Z,1516709789.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:30.005Z,1516709790.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:30.384Z,1516709790.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:30.402Z,1516709790.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:30.795Z,1516709790.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:30.810Z,1516709790.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:31.191Z,1516709791.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:31.210Z,1516709791.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:31.594Z,1516709791.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:31.609Z,1516709791.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:31.986Z,1516709791.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:32.001Z,1516709792.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:32.381Z,1516709792.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:32.403Z,1516709792.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:32.780Z,1516709792.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:32.812Z,1516709792.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:33.185Z,1516709793.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:33.200Z,1516709793.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:33.595Z,1516709793.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:33.610Z,1516709793.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:33.998Z,1516709793.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:34.013Z,1516709794.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:34.395Z,1516709794.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:34.410Z,1516709794.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:34.774Z,1516709794.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:34.802Z,1516709794.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:35.188Z,1516709795.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:35.207Z,1516709795.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:35.576Z,1516709795.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:35.612Z,1516709795.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:35.978Z,1516709795.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:36.004Z,1516709796.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:36.376Z,1516709796.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:36.430Z,1516709796.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:36.795Z,1516709796.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:36.826Z,1516709796.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:37.191Z,1516709797.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:37.215Z,1516709797.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:37.599Z,1516709797.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:37.630Z,1516709797.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:37.985Z,1516709797.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:37.000Z,1516709798.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:38.384Z,1516709798.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:38.405Z,1516709798.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:38.786Z,1516709798.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:38.801Z,1516709798.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:39.222Z,1516709799.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:39.248Z,1516709799.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:39.599Z,1516709799.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:39.614Z,1516709799.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:39.991Z,1516709799.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:40.006Z,1516709800.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:40.387Z,1516709800.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:40.414Z,1516709800.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:40.778Z,1516709800.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:40.809Z,1516709800.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:41.176Z,1516709801.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:41.213Z,1516709801.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:41.587Z,1516709801.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:41.623Z,1516709801.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:41.991Z,1516709801.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:42.017Z,1516709802.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:42.387Z,1516709802.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:42.414Z,1516709802.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:42.785Z,1516709802.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:42.800Z,1516709802.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:43.178Z,1516709803.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:43.197Z,1516709803.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:43.595Z,1516709803.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:43.626Z,1516709803.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:43.999Z,1516709803.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:44.033Z,1516709804.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:44.388Z,1516709804.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:44.403Z,1516709804.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:44.783Z,1516709804.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:44.806Z,1516709804.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:45.183Z,1516709805.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:45.209Z,1516709805.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:45.599Z,1516709805.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:45.631Z,1516709805.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:45.992Z,1516709805.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:46.007Z,1516709806.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:46.388Z,1516709806.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:46.403Z,1516709806.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:46.786Z,1516709806.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:46.802Z,1516709806.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:47.184Z,1516709807.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:47.207Z,1516709807.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:47.596Z,1516709807.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:47.616Z,1516709807.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:47.992Z,1516709807.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:48.019Z,1516709808.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:48.395Z,1516709808.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:48.411Z,1516709808.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:48.777Z,1516709808.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:48.810Z,1516709808.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:49.174Z,1516709809.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:49.197Z,1516709809.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:49.587Z,1516709809.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:49.627Z,1516709809.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:50.001Z,1516709810.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:50.015Z,1516709810.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:50.388Z,1516709810.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:50.421Z,1516709810.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:50.781Z,1516709810.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:50.812Z,1516709810.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:51.176Z,1516709811.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:51.214Z,1516709811.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:51.587Z,1516709811.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:51.625Z,1516709811.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:52.004Z,1516709812.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:52.018Z,1516709812.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:52.387Z,1516709812.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:52.422Z,1516709812.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:52.778Z,1516709812.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:52.793Z,1516709812.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:53.181Z,1516709813.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:53.216Z,1516709813.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:53.594Z,1516709813.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:53.626Z,1516709813.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:53.991Z,1516709813.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:54.022Z,1516709814.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:54.395Z,1516709814.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:54.426Z,1516709814.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:54.788Z,1516709814.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:54.802Z,1516709814.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:55.183Z,1516709815.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:55.198Z,1516709815.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:55.596Z,1516709815.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:55.619Z,1516709815.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:55.992Z,1516709815.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:56.007Z,1516709816.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:56.390Z,1516709816.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:56.405Z,1516709816.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:56.785Z,1516709816.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:56.801Z,1516709816.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:57.183Z,1516709817.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:57.205Z,1516709817.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:57.589Z,1516709817.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:57.609Z,1516709817.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:57.992Z,1516709817.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:58.008Z,1516709818.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:58.391Z,1516709818.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:58.407Z,1516709818.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:58.780Z,1516709818.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:58.806Z,1516709818.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:59.180Z,1516709819.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:59.203Z,1516709819.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:59.596Z,1516709819.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:16:59.611Z,1516709819.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:16:59.994Z,1516709819.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:00.010Z,1516709820.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:00.395Z,1516709820.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:00.410Z,1516709820.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:00.786Z,1516709820.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:00.801Z,1516709820.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:01.174Z,1516709821.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:01.202Z,1516709821.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:01.595Z,1516709821.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:01.610Z,1516709821.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:01.000Z,1516709822.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:02.014Z,1516709822.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:02.392Z,1516709822.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:02.413Z,1516709822.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:02.777Z,1516709822.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:02.809Z,1516709822.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:03.176Z,1516709823.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:03.212Z,1516709823.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:03.595Z,1516709823.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:03.610Z,1516709823.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:04.000Z,1516709824.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:04.021Z,1516709824.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:04.396Z,1516709824.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:04.411Z,1516709824.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:04.790Z,1516709824.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:04.805Z,1516709824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:05.176Z,1516709825.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:05.209Z,1516709825.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:05.596Z,1516709825.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:05.611Z,1516709825.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:05.998Z,1516709825.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:06.014Z,1516709826.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:06.400Z,1516709826.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:06.427Z,1516709826.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:06.777Z,1516709826.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:06.812Z,1516709826.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:07.174Z,1516709827.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:07.197Z,1516709827.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:07.587Z,1516709827.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:07.621Z,1516709827.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:08.000Z,1516709828.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:08.015Z,1516709828.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:08.387Z,1516709828.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:08.422Z,1516709828.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:08.778Z,1516709828.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:08.804Z,1516709828.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:09.176Z,1516709829.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:09.191Z,1516709829.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:09.587Z,1516709829.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:09.619Z,1516709829.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:09.999Z,1516709829.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:10.026Z,1516709830.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:10.391Z,1516709830.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:10.430Z,1516709830.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:10.776Z,1516709830.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:10.791Z,1516709830.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:11.188Z,1516709831.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:11.224Z,1516709831.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:11.599Z,1516709831.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:11.632Z,1516709831.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:11.991Z,1516709831.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:12.022Z,1516709832.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:12.395Z,1516709832.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:12.426Z,1516709832.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:12.786Z,1516709832.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:12.801Z,1516709832.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:13.181Z,1516709833.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:13.197Z,1516709833.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:13.599Z,1516709833.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:13.630Z,1516709833.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:13.999Z,1516709833.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:14.034Z,1516709834.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:14.388Z,1516709834.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:14.409Z,1516709834.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:14.791Z,1516709834.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:14.806Z,1516709834.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:15.182Z,1516709835.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:15.209Z,1516709835.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:15.595Z,1516709835.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:15.617Z,1516709835.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:15.998Z,1516709835.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:16.013Z,1516709836.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:16.394Z,1516709836.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:16.416Z,1516709836.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:16.779Z,1516709836.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:16.802Z,1516709836.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:17.179Z,1516709837.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:17.212Z,1516709837.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:17.581Z,1516709837.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:17.610Z,1516709837.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:17.999Z,1516709837.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:18.014Z,1516709838.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:18.398Z,1516709838.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:18.413Z,1516709838.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:18.792Z,1516709838.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:18.819Z,1516709838.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:19.174Z,1516709839.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:19.209Z,1516709839.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:19.593Z,1516709839.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:19.608Z,1516709839.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:19.978Z,1516709839.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:20.013Z,1516709840.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:20.374Z,1516709840.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:20.389Z,1516709840.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:20.787Z,1516709840.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:20.818Z,1516709840.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:21.199Z,1516709841.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:21.233Z,1516709841.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:21.591Z,1516709841.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:21.623Z,1516709841.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:21.988Z,1516709841.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:22.025Z,1516709842.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:22.387Z,1516709842.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:22.402Z,1516709842.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:22.787Z,1516709842.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:22.809Z,1516709842.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:23.191Z,1516709843.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:23.206Z,1516709843.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:23.587Z,1516709843.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:23.602Z,1516709843.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:23.988Z,1516709843.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:24.003Z,1516709844.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:24.407Z,1516709844.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:24.432Z,1516709844.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:24.804Z,1516709844.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:24.837Z,1516709844.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:25.183Z,1516709845.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:25.206Z,1516709845.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:25.586Z,1516709845.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:25.601Z,1516709845.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:28.689Z,1516709848.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:28.704Z,1516709848.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:28.801Z,1516709848.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:28.837Z,1516709848.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:29.165Z,1516709849.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:29.192Z,1516709849.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:29.569Z,1516709849.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:29.605Z,1516709849.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:29.968Z,1516709849.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:29.990Z,1516709849.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:30.352Z,1516709850.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:30.381Z,1516709850.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:30.794Z,1516709850.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:30.812Z,1516709850.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:31.161Z,1516709851.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:31.197Z,1516709851.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:31.554Z,1516709851.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:31.574Z,1516709851.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:31.964Z,1516709851.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:31.979Z,1516709851.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:32.364Z,1516709852.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:32.408Z,1516709852.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:32.760Z,1516709852.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:32.770Z,1516709852.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x48 got:0x16839 2018-01-23T12:17:32.812Z,1516709852.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:33.157Z,1516709853.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:33.172Z,1516709853.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:33.551Z,1516709853.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:33.595Z,1516709853.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:33.957Z,1516709853.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:33.000Z,1516709854.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:34.353Z,1516709854.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:34.372Z,1516709854.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:34.760Z,1516709854.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:34.781Z,1516709854.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:35.164Z,1516709855.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:35.181Z,1516709855.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:35.562Z,1516709855.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:35.604Z,1516709855.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:35.952Z,1516709855.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:35.971Z,1516709855.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:36.353Z,1516709856.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:36.370Z,1516709856.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:36.372Z,1516709856.372 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:36.373Z,1516709856.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180 2018-01-23T12:17:36.373Z,1516709856.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:17:36.386Z,1516709856.386 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:17:36.755Z,1516709856.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:36.782Z,1516709856.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:36.782Z,1516709856.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180 2018-01-23T12:17:36.782Z,1516709856.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:17:36.785Z,1516709856.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:36.785Z,1516709856.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 180 2018-01-23T12:17:36.785Z,1516709856.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:17:36.810Z,1516709856.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:17:36.810Z,1516709856.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:17:36.810Z,1516709856.810 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:17:36.810Z,1516709856.810 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180 2018-01-23T12:17:37.149Z,1516709857.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:37.192Z,1516709857.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:17:37.193Z,1516709857.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:17:37.193Z,1516709857.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:17:37.228Z,1516709857.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:17:37.228Z,1516709857.228 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180 2018-01-23T12:17:37.229Z,1516709857.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:17:37.229Z,1516709857.229 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 180 2018-01-23T12:17:37.548Z,1516709857.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:37.573Z,1516709857.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:17:37.574Z,1516709857.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:17:37.574Z,1516709857.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:17:37.575Z,1516709857.575 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:17:37.575Z,1516709857.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:17:37.576Z,1516709857.576 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:17:37.967Z,1516709857.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:37.988Z,1516709857.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:17:37.989Z,1516709857.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:38.372Z,1516709858.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:38.388Z,1516709858.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:17:38.389Z,1516709858.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:38.763Z,1516709858.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:38.796Z,1516709858.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:17:38.797Z,1516709858.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:39.148Z,1516709859.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:39.179Z,1516709859.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:17:39.180Z,1516709859.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:39.548Z,1516709859.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:39.578Z,1516709859.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:17:39.579Z,1516709859.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:39.945Z,1516709859.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:39.977Z,1516709859.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:17:39.978Z,1516709859.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:40.348Z,1516709860.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:40.388Z,1516709860.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:17:40.389Z,1516709860.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:40.763Z,1516709860.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:40.782Z,1516709860.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:17:40.784Z,1516709860.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:41.168Z,1516709861.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:41.187Z,1516709861.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:17:41.188Z,1516709861.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:41.566Z,1516709861.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:41.581Z,1516709861.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:17:41.582Z,1516709861.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:41.945Z,1516709861.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:41.976Z,1516709861.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:17:41.977Z,1516709861.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:42.352Z,1516709862.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:42.382Z,1516709862.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:17:42.383Z,1516709862.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:42.744Z,1516709862.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:42.781Z,1516709862.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:17:42.782Z,1516709862.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:43.145Z,1516709863.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:43.177Z,1516709863.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:17:43.178Z,1516709863.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:43.544Z,1516709863.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:43.580Z,1516709863.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:17:43.581Z,1516709863.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:43.955Z,1516709863.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:43.984Z,1516709863.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:17:43.985Z,1516709863.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:44.359Z,1516709864.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:44.397Z,1516709864.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:17:44.398Z,1516709864.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:44.756Z,1516709864.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:44.785Z,1516709864.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:17:44.786Z,1516709864.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:45.144Z,1516709865.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:45.187Z,1516709865.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:17:45.188Z,1516709865.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:45.548Z,1516709865.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:45.588Z,1516709865.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:17:45.589Z,1516709865.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:45.945Z,1516709865.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:45.960Z,1516709865.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:17:45.961Z,1516709865.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:46.344Z,1516709866.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:46.394Z,1516709866.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:17:46.395Z,1516709866.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:46.759Z,1516709866.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:46.785Z,1516709866.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:17:46.786Z,1516709866.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:47.159Z,1516709867.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:47.189Z,1516709867.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:17:47.190Z,1516709867.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:47.555Z,1516709867.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:47.593Z,1516709867.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:17:47.594Z,1516709867.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:47.948Z,1516709867.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:47.986Z,1516709867.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:17:47.991Z,1516709867.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:48.348Z,1516709868.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:48.368Z,1516709868.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:17:48.369Z,1516709868.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:48.752Z,1516709868.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:48.767Z,1516709868.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:17:48.768Z,1516709868.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:49.152Z,1516709869.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:49.167Z,1516709869.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:17:49.168Z,1516709869.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:49.549Z,1516709869.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:49.578Z,1516709869.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:17:49.583Z,1516709869.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:49.955Z,1516709869.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:49.970Z,1516709869.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:17:49.971Z,1516709869.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:50.359Z,1516709870.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:50.374Z,1516709870.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:17:50.375Z,1516709870.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:50.758Z,1516709870.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:50.778Z,1516709870.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:17:50.780Z,1516709870.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:51.153Z,1516709871.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:51.171Z,1516709871.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:17:51.172Z,1516709871.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:51.552Z,1516709871.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:51.566Z,1516709871.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:17:51.567Z,1516709871.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:51.948Z,1516709871.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:51.970Z,1516709871.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:17:51.975Z,1516709871.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:52.357Z,1516709872.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:52.371Z,1516709872.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:17:52.372Z,1516709872.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:52.763Z,1516709872.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:52.781Z,1516709872.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:17:52.782Z,1516709872.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:53.166Z,1516709873.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:53.181Z,1516709873.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:17:53.182Z,1516709873.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:53.564Z,1516709873.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:53.580Z,1516709873.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:17:53.581Z,1516709873.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:53.951Z,1516709873.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:53.969Z,1516709873.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:17:53.970Z,1516709873.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:54.348Z,1516709874.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:54.371Z,1516709874.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:17:54.373Z,1516709874.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:54.751Z,1516709874.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:54.776Z,1516709874.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:17:54.777Z,1516709874.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:55.149Z,1516709875.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:55.171Z,1516709875.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:17:55.172Z,1516709875.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:55.547Z,1516709875.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:55.579Z,1516709875.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:17:55.580Z,1516709875.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:55.964Z,1516709875.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:55.983Z,1516709875.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:17:55.984Z,1516709875.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:56.366Z,1516709876.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:56.381Z,1516709876.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:17:56.382Z,1516709876.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:56.763Z,1516709876.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:56.778Z,1516709876.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:17:56.779Z,1516709876.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:57.154Z,1516709877.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:57.169Z,1516709877.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:57.556Z,1516709877.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:57.571Z,1516709877.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:57.949Z,1516709877.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:57.972Z,1516709877.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:58.354Z,1516709878.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:58.369Z,1516709878.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:58.763Z,1516709878.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:58.778Z,1516709878.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:59.167Z,1516709879.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:59.186Z,1516709879.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:59.564Z,1516709879.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:59.578Z,1516709879.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:17:59.948Z,1516709879.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:17:59.975Z,1516709879.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:00.344Z,1516709880.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:00.377Z,1516709880.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:00.744Z,1516709880.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:00.784Z,1516709880.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:01.157Z,1516709881.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:01.173Z,1516709881.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:01.543Z,1516709881.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:01.581Z,1516709881.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:01.968Z,1516709881.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:01.983Z,1516709881.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:02.370Z,1516709882.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:02.388Z,1516709882.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:02.763Z,1516709882.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:02.779Z,1516709882.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:03.144Z,1516709883.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:03.181Z,1516709883.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:03.545Z,1516709883.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:03.581Z,1516709883.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:03.949Z,1516709883.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:03.975Z,1516709883.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:04.344Z,1516709884.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:04.378Z,1516709884.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:04.763Z,1516709884.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:04.778Z,1516709884.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:05.165Z,1516709885.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:05.192Z,1516709885.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:05.558Z,1516709885.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:05.585Z,1516709885.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:05.948Z,1516709885.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:05.980Z,1516709885.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:06.344Z,1516709886.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:06.381Z,1516709886.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:06.745Z,1516709886.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:06.784Z,1516709886.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:07.146Z,1516709887.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:07.161Z,1516709887.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:07.545Z,1516709887.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:07.565Z,1516709887.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:07.962Z,1516709887.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:07.985Z,1516709887.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:08.363Z,1516709888.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:08.394Z,1516709888.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:08.756Z,1516709888.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:08.771Z,1516709888.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:09.152Z,1516709889.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:09.179Z,1516709889.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:09.548Z,1516709889.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:09.580Z,1516709889.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:09.961Z,1516709889.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:09.976Z,1516709889.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:10.358Z,1516709890.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:10.374Z,1516709890.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:10.763Z,1516709890.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:10.785Z,1516709890.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:11.167Z,1516709891.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:11.184Z,1516709891.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:11.564Z,1516709891.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:11.580Z,1516709891.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:11.948Z,1516709891.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:11.980Z,1516709891.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:12.361Z,1516709892.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:12.381Z,1516709892.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:12.753Z,1516709892.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:12.769Z,1516709892.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:13.149Z,1516709893.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:13.172Z,1516709893.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:13.547Z,1516709893.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:13.578Z,1516709893.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:13.968Z,1516709893.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:13.984Z,1516709893.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:14.360Z,1516709894.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:14.388Z,1516709894.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:14.763Z,1516709894.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:14.778Z,1516709894.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:15.143Z,1516709895.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:15.179Z,1516709895.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:15.548Z,1516709895.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:15.574Z,1516709895.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:15.945Z,1516709895.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:15.976Z,1516709895.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:16.344Z,1516709896.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:16.373Z,1516709896.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:16.762Z,1516709896.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:16.785Z,1516709896.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:17.167Z,1516709897.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:17.182Z,1516709897.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:17.558Z,1516709897.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:17.591Z,1516709897.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:17.944Z,1516709897.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:17.970Z,1516709897.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:18.343Z,1516709898.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:18.377Z,1516709898.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:18.744Z,1516709898.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:18.780Z,1516709898.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:19.145Z,1516709899.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:19.177Z,1516709899.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:19.544Z,1516709899.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:19.570Z,1516709899.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:19.961Z,1516709899.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:19.981Z,1516709899.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:20.367Z,1516709900.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:20.382Z,1516709900.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:20.760Z,1516709900.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:20.781Z,1516709900.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:21.144Z,1516709901.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:21.180Z,1516709901.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:21.549Z,1516709901.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:21.581Z,1516709901.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:21.945Z,1516709901.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:21.977Z,1516709901.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:22.361Z,1516709902.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:22.376Z,1516709902.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:22.763Z,1516709902.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:22.779Z,1516709902.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:23.164Z,1516709903.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:23.187Z,1516709903.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:23.567Z,1516709903.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:23.582Z,1516709903.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:23.942Z,1516709903.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:23.965Z,1516709903.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:24.344Z,1516709904.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:24.380Z,1516709904.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:24.744Z,1516709904.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:24.782Z,1516709904.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:24.785Z,1516709904.785 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:13:24.7Z 2018-01-23T12:18:24.785Z,1516709904.785 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:18:24.785Z,1516709904.785 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:18:25.145Z,1516709905.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:25.173Z,1516709905.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:25.682Z,1516709905.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:25.697Z,1516709905.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:25.956Z,1516709905.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:25.997Z,1516709905.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:29.069Z,1516709909.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:29.085Z,1516709909.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:29.169Z,1516709909.169 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0212.lzma 2018-01-23T12:18:29.204Z,1516709909.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:29.240Z,1516709909.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:29.534Z,1516709909.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:29.557Z,1516709909.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:29.909Z,1516709909.909 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0212.lzma.bak 2018-01-23T12:18:29.910Z,1516709909.910 [DataOverHttps](INFO): SBD MOMSN=7755555 2018-01-23T12:18:29.950Z,1516709909.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:29.965Z,1516709909.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:30.696Z,1516709910.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:30.711Z,1516709910.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:30.819Z,1516709910.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:30.861Z,1516709910.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:33.887Z,1516709913.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:33.902Z,1516709913.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:34.012Z,1516709914.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:34.052Z,1516709914.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:34.349Z,1516709914.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:34.372Z,1516709914.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:34.758Z,1516709914.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:34.773Z,1516709914.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:35.155Z,1516709915.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:35.170Z,1516709915.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:35.550Z,1516709915.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:35.574Z,1516709915.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:38.663Z,1516709918.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:38.702Z,1516709918.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:38.759Z,1516709918.759 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0213.lzma 2018-01-23T12:18:38.802Z,1516709918.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:38.842Z,1516709918.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:39.155Z,1516709919.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:39.170Z,1516709919.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:39.525Z,1516709919.525 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0213.lzma.bak 2018-01-23T12:18:39.526Z,1516709919.526 [DataOverHttps](INFO): SBD MOMSN=7755557 2018-01-23T12:18:39.566Z,1516709919.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:39.601Z,1516709919.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:40.197Z,1516709920.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:40.213Z,1516709920.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:40.216Z,1516709920.216 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:18:40.216Z,1516709920.216 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:18:40.216Z,1516709920.216 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:18:40.351Z,1516709920.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:40.387Z,1516709920.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:43.497Z,1516709923.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:43.513Z,1516709923.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:43.620Z,1516709923.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:43.648Z,1516709923.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:43.988Z,1516709923.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:44.007Z,1516709924.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:44.374Z,1516709924.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:44.404Z,1516709924.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:44.758Z,1516709924.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:44.774Z,1516709924.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:45.169Z,1516709925.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:45.205Z,1516709925.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:45.564Z,1516709925.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:45.580Z,1516709925.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:45.975Z,1516709925.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:46.010Z,1516709926.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:46.375Z,1516709926.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:46.407Z,1516709926.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:46.767Z,1516709926.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:46.789Z,1516709926.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:47.162Z,1516709927.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:47.177Z,1516709927.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:47.562Z,1516709927.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:47.585Z,1516709927.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:47.965Z,1516709927.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:47.980Z,1516709927.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:48.361Z,1516709928.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:48.382Z,1516709928.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:48.767Z,1516709928.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:48.782Z,1516709928.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:49.179Z,1516709929.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:49.194Z,1516709929.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:49.583Z,1516709929.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:49.615Z,1516709929.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:49.972Z,1516709929.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:49.993Z,1516709929.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:50.363Z,1516709930.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:50.393Z,1516709930.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:50.774Z,1516709930.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:50.790Z,1516709930.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:51.179Z,1516709931.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:51.194Z,1516709931.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:51.577Z,1516709931.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:51.592Z,1516709931.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:51.962Z,1516709931.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:51.985Z,1516709931.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:52.370Z,1516709932.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:52.385Z,1516709932.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:52.776Z,1516709932.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:52.797Z,1516709932.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:53.175Z,1516709933.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:53.190Z,1516709933.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:53.574Z,1516709933.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:53.590Z,1516709933.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:53.966Z,1516709933.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:53.981Z,1516709933.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:54.360Z,1516709934.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:54.382Z,1516709934.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:54.774Z,1516709934.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:54.790Z,1516709934.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:55.178Z,1516709935.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:55.197Z,1516709935.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:55.575Z,1516709935.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:55.590Z,1516709935.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:55.961Z,1516709935.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:55.984Z,1516709935.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:56.366Z,1516709936.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:56.381Z,1516709936.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:56.775Z,1516709936.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:56.789Z,1516709936.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:57.178Z,1516709937.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:57.197Z,1516709937.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:57.576Z,1516709937.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:57.591Z,1516709937.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:57.964Z,1516709937.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:57.984Z,1516709937.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:58.359Z,1516709938.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:58.391Z,1516709938.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:58.776Z,1516709938.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:58.791Z,1516709938.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:59.174Z,1516709939.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:59.189Z,1516709939.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:59.578Z,1516709939.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:59.597Z,1516709939.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:18:59.966Z,1516709939.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:18:59.981Z,1516709939.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:00.354Z,1516709940.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:00.386Z,1516709940.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:00.779Z,1516709940.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:00.794Z,1516709940.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:01.180Z,1516709941.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:01.195Z,1516709941.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:01.575Z,1516709941.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:01.597Z,1516709941.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:01.961Z,1516709941.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:01.993Z,1516709941.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:02.356Z,1516709942.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:02.390Z,1516709942.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:02.774Z,1516709942.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:02.796Z,1516709942.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:03.179Z,1516709943.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:03.194Z,1516709943.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:03.574Z,1516709943.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:03.589Z,1516709943.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:03.957Z,1516709943.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:03.983Z,1516709943.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:04.356Z,1516709944.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:04.382Z,1516709944.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:04.773Z,1516709944.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:04.794Z,1516709944.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:05.173Z,1516709945.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:05.196Z,1516709945.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:05.575Z,1516709945.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:05.590Z,1516709945.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:05.957Z,1516709945.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:05.990Z,1516709945.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:06.354Z,1516709946.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:06.377Z,1516709946.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:06.767Z,1516709946.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:06.802Z,1516709946.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:07.180Z,1516709947.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:07.195Z,1516709947.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:07.567Z,1516709947.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:07.601Z,1516709947.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:07.957Z,1516709947.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:07.988Z,1516709947.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:08.360Z,1516709948.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:08.401Z,1516709948.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:08.767Z,1516709948.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:08.794Z,1516709948.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:09.171Z,1516709949.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:09.205Z,1516709949.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:09.585Z,1516709949.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:09.600Z,1516709949.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:09.954Z,1516709949.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:09.970Z,1516709949.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:10.357Z,1516709950.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:10.372Z,1516709950.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:10.764Z,1516709950.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:10.779Z,1516709950.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:11.167Z,1516709951.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:11.205Z,1516709951.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:11.592Z,1516709951.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:11.607Z,1516709951.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:11.971Z,1516709951.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:12.006Z,1516709952.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:12.361Z,1516709952.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:12.381Z,1516709952.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:12.763Z,1516709952.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:12.778Z,1516709952.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:13.161Z,1516709953.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:13.188Z,1516709953.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:13.565Z,1516709953.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:13.581Z,1516709953.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:13.967Z,1516709953.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:13.982Z,1516709953.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:14.371Z,1516709954.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:14.393Z,1516709954.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:14.772Z,1516709954.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:14.786Z,1516709954.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:15.162Z,1516709955.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:15.185Z,1516709955.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:15.569Z,1516709955.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:15.583Z,1516709955.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:15.964Z,1516709955.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:15.979Z,1516709955.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:16.361Z,1516709956.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:16.388Z,1516709956.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:16.769Z,1516709956.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:16.784Z,1516709956.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:17.175Z,1516709957.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:17.190Z,1516709957.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:17.578Z,1516709957.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:17.597Z,1516709957.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:17.976Z,1516709957.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:17.991Z,1516709957.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:18.354Z,1516709958.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:18.389Z,1516709958.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:18.768Z,1516709958.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:18.787Z,1516709958.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:19.170Z,1516709959.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:19.185Z,1516709959.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:19.575Z,1516709959.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:19.590Z,1516709959.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:19.978Z,1516709959.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:20.006Z,1516709960.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:20.383Z,1516709960.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:20.398Z,1516709960.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:20.771Z,1516709960.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:20.796Z,1516709960.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:21.177Z,1516709961.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:21.193Z,1516709961.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:21.556Z,1516709961.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:21.593Z,1516709961.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:21.955Z,1516709961.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:21.998Z,1516709961.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:22.379Z,1516709962.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:22.435Z,1516709962.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:22.761Z,1516709962.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:22.795Z,1516709962.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:23.168Z,1516709963.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:23.197Z,1516709963.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:23.572Z,1516709963.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:23.610Z,1516709963.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:23.967Z,1516709963.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:23.997Z,1516709963.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:24.356Z,1516709964.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:24.393Z,1516709964.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:24.756Z,1516709964.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:24.773Z,1516709964.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:25.166Z,1516709965.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:25.182Z,1516709965.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:25.558Z,1516709965.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:25.573Z,1516709965.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:25.980Z,1516709965.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:26.005Z,1516709966.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:26.379Z,1516709966.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:26.402Z,1516709966.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:26.775Z,1516709966.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:26.802Z,1516709966.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:27.162Z,1516709967.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:27.181Z,1516709967.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:27.567Z,1516709967.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:27.582Z,1516709967.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:27.966Z,1516709967.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:27.981Z,1516709967.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:28.362Z,1516709968.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:28.393Z,1516709968.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:28.767Z,1516709968.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:28.782Z,1516709968.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:29.171Z,1516709969.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:29.186Z,1516709969.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:29.571Z,1516709969.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:29.586Z,1516709969.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:29.971Z,1516709969.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:29.985Z,1516709969.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:30.364Z,1516709970.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:30.383Z,1516709970.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:30.764Z,1516709970.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:30.785Z,1516709970.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:31.166Z,1516709971.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:31.181Z,1516709971.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:31.564Z,1516709971.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:31.580Z,1516709971.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:31.970Z,1516709971.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:31.985Z,1516709971.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:32.370Z,1516709972.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:32.385Z,1516709972.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:32.770Z,1516709972.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:32.789Z,1516709972.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:33.164Z,1516709973.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:33.185Z,1516709973.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:33.565Z,1516709973.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:33.580Z,1516709973.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:33.964Z,1516709973.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:33.980Z,1516709973.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:34.364Z,1516709974.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:34.382Z,1516709974.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:34.765Z,1516709974.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:34.780Z,1516709974.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:35.170Z,1516709975.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:35.185Z,1516709975.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:35.571Z,1516709975.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:35.586Z,1516709975.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:35.970Z,1516709975.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:35.985Z,1516709975.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:36.360Z,1516709976.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:36.380Z,1516709976.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:36.760Z,1516709976.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:36.784Z,1516709976.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:37.168Z,1516709977.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:37.182Z,1516709977.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:37.569Z,1516709977.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:37.584Z,1516709977.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:37.974Z,1516709977.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:37.997Z,1516709977.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:38.378Z,1516709978.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:38.393Z,1516709978.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:38.774Z,1516709978.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:38.790Z,1516709978.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:39.160Z,1516709979.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:39.183Z,1516709979.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:39.565Z,1516709979.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:39.584Z,1516709979.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:39.954Z,1516709979.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:39.986Z,1516709979.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:40.369Z,1516709980.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:40.384Z,1516709980.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:40.757Z,1516709980.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:40.793Z,1516709980.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:43.876Z,1516709983.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:43.891Z,1516709983.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:44.026Z,1516709984.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:44.061Z,1516709984.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:44.355Z,1516709984.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:44.379Z,1516709984.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:44.745Z,1516709984.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:44.759Z,1516709984.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:45.141Z,1516709985.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:45.156Z,1516709985.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:45.539Z,1516709985.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:45.554Z,1516709985.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:45.955Z,1516709985.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:45.990Z,1516709985.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:46.343Z,1516709986.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:46.359Z,1516709986.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:46.747Z,1516709986.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:46.762Z,1516709986.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:47.141Z,1516709987.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:47.156Z,1516709987.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:47.541Z,1516709987.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:47.557Z,1516709987.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:47.939Z,1516709987.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:47.954Z,1516709987.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:48.341Z,1516709988.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:48.356Z,1516709988.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:48.740Z,1516709988.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:48.755Z,1516709988.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:49.143Z,1516709989.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:49.159Z,1516709989.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:49.547Z,1516709989.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:49.562Z,1516709989.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:49.944Z,1516709989.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:49.959Z,1516709989.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:50.338Z,1516709990.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:50.361Z,1516709990.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:50.741Z,1516709990.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:50.756Z,1516709990.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:51.137Z,1516709991.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:51.153Z,1516709991.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:51.534Z,1516709991.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:51.570Z,1516709991.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:51.943Z,1516709991.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:51.980Z,1516709991.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:52.343Z,1516709992.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:52.381Z,1516709992.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:52.743Z,1516709992.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:52.769Z,1516709992.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:53.132Z,1516709993.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:53.177Z,1516709993.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:53.536Z,1516709993.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:53.572Z,1516709993.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:53.932Z,1516709993.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:53.969Z,1516709993.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:54.337Z,1516709994.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:54.352Z,1516709994.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:54.736Z,1516709994.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:54.773Z,1516709994.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:55.151Z,1516709995.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:55.175Z,1516709995.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:55.551Z,1516709995.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:55.577Z,1516709995.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:55.943Z,1516709995.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:55.958Z,1516709995.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:56.338Z,1516709996.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:56.353Z,1516709996.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:56.732Z,1516709996.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:56.769Z,1516709996.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:57.134Z,1516709997.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:57.174Z,1516709997.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:57.533Z,1516709997.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:57.560Z,1516709997.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:57.949Z,1516709997.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:57.971Z,1516709997.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:58.348Z,1516709998.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:58.380Z,1516709998.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:58.757Z,1516709998.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:58.772Z,1516709998.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:59.154Z,1516709999.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:59.169Z,1516709999.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:59.533Z,1516709999.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:59.571Z,1516709999.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:19:59.933Z,1516709999.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:19:59.960Z,1516709999.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:00.334Z,1516710000.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:00.365Z,1516710000.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:00.733Z,1516710000.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:00.771Z,1516710000.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:01.144Z,1516710001.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:01.171Z,1516710001.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:01.557Z,1516710001.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:01.573Z,1516710001.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:01.944Z,1516710001.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:01.981Z,1516710001.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:02.341Z,1516710002.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:02.377Z,1516710002.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:02.740Z,1516710002.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:02.756Z,1516710002.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:03.141Z,1516710003.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:03.157Z,1516710003.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:03.537Z,1516710003.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:03.561Z,1516710003.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:03.955Z,1516710003.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:03.987Z,1516710003.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:04.343Z,1516710004.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:04.358Z,1516710004.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:04.755Z,1516710004.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:04.787Z,1516710004.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:05.140Z,1516710005.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:05.176Z,1516710005.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:05.542Z,1516710005.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:05.558Z,1516710005.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:05.939Z,1516710005.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:05.954Z,1516710005.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:06.342Z,1516710006.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:06.364Z,1516710006.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:06.740Z,1516710006.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:06.756Z,1516710006.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:07.143Z,1516710007.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:07.165Z,1516710007.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:07.547Z,1516710007.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:07.563Z,1516710007.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:07.946Z,1516710007.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:07.961Z,1516710007.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:08.340Z,1516710008.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:08.355Z,1516710008.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:08.741Z,1516710008.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:08.756Z,1516710008.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:09.140Z,1516710009.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:09.159Z,1516710009.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:09.541Z,1516710009.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:09.556Z,1516710009.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:09.946Z,1516710009.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:09.961Z,1516710009.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:10.347Z,1516710010.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:10.362Z,1516710010.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:10.746Z,1516710010.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:10.765Z,1516710010.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:11.141Z,1516710011.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:11.156Z,1516710011.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:11.540Z,1516710011.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:11.555Z,1516710011.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:11.936Z,1516710011.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:11.969Z,1516710011.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:12.346Z,1516710012.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:12.361Z,1516710012.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:12.744Z,1516710012.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:12.765Z,1516710012.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:13.150Z,1516710013.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:13.169Z,1516710013.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:13.550Z,1516710013.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:13.565Z,1516710013.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:13.951Z,1516710013.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:13.966Z,1516710013.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:14.336Z,1516710014.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:14.358Z,1516710014.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:14.741Z,1516710014.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:14.756Z,1516710014.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:15.140Z,1516710015.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:15.159Z,1516710015.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:15.548Z,1516710015.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:15.569Z,1516710015.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:15.950Z,1516710015.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:15.972Z,1516710015.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:16.348Z,1516710016.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:16.367Z,1516710016.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:16.751Z,1516710016.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:16.766Z,1516710016.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:17.142Z,1516710017.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:17.164Z,1516710017.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:17.530Z,1516710017.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:17.557Z,1516710017.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:17.935Z,1516710017.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:17.967Z,1516710017.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:18.346Z,1516710018.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:18.361Z,1516710018.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:18.730Z,1516710018.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:18.758Z,1516710018.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:19.150Z,1516710019.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:19.165Z,1516710019.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:19.555Z,1516710019.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:19.570Z,1516710019.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:19.951Z,1516710019.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:19.966Z,1516710019.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:20.332Z,1516710020.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:20.369Z,1516710020.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:20.733Z,1516710020.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:20.770Z,1516710020.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:21.137Z,1516710021.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:21.169Z,1516710021.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:21.532Z,1516710021.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:21.568Z,1516710021.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:21.943Z,1516710021.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:21.987Z,1516710021.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:22.343Z,1516710022.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:22.379Z,1516710022.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:22.743Z,1516710022.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:22.778Z,1516710022.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:23.133Z,1516710023.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:23.170Z,1516710023.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:23.536Z,1516710023.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:23.568Z,1516710023.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:23.932Z,1516710023.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:23.968Z,1516710023.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:24.334Z,1516710024.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:24.369Z,1516710024.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:24.732Z,1516710024.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:24.769Z,1516710024.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:25.143Z,1516710025.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:25.174Z,1516710025.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:25.555Z,1516710025.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:25.589Z,1516710025.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:25.947Z,1516710025.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:25.962Z,1516710025.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:26.338Z,1516710026.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:26.357Z,1516710026.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:26.737Z,1516710026.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:26.765Z,1516710026.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:27.140Z,1516710027.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:27.155Z,1516710027.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:27.538Z,1516710027.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:27.561Z,1516710027.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:27.943Z,1516710027.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:27.959Z,1516710027.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:28.347Z,1516710028.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:28.362Z,1516710028.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:28.743Z,1516710028.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:28.758Z,1516710028.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:29.138Z,1516710029.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:29.161Z,1516710029.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:29.544Z,1516710029.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:29.560Z,1516710029.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:29.945Z,1516710029.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:29.965Z,1516710029.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:30.347Z,1516710030.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:30.363Z,1516710030.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:30.746Z,1516710030.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:30.765Z,1516710030.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:31.137Z,1516710031.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:31.159Z,1516710031.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:31.541Z,1516710031.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:31.556Z,1516710031.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:31.947Z,1516710031.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:31.962Z,1516710031.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:32.356Z,1516710032.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:32.383Z,1516710032.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:32.752Z,1516710032.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:32.779Z,1516710032.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:33.133Z,1516710033.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:33.165Z,1516710033.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:33.536Z,1516710033.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:33.568Z,1516710033.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:33.943Z,1516710033.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:33.980Z,1516710033.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:34.357Z,1516710034.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:34.372Z,1516710034.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:34.743Z,1516710034.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:34.777Z,1516710034.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:35.141Z,1516710035.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:35.170Z,1516710035.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:35.533Z,1516710035.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:35.564Z,1516710035.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:35.944Z,1516710035.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:35.970Z,1516710035.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:36.347Z,1516710036.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:36.383Z,1516710036.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:36.756Z,1516710036.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:36.785Z,1516710036.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.142Z,1516710037.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:37.180Z,1516710037.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.541Z,1516710037.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:37.561Z,1516710037.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.591Z,1516710037.591 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.591Z,1516710037.591 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181 2018-01-23T12:20:37.591Z,1516710037.591 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:20:37.603Z,1516710037.603 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:20:37.956Z,1516710037.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:37.988Z,1516710037.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.988Z,1516710037.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181 2018-01-23T12:20:37.988Z,1516710037.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:20:37.990Z,1516710037.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:37.990Z,1516710037.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 181 2018-01-23T12:20:37.990Z,1516710037.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:20:38.003Z,1516710038.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:20:38.003Z,1516710038.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:20:38.003Z,1516710038.003 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:20:38.003Z,1516710038.003 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181 2018-01-23T12:20:38.360Z,1516710038.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:38.385Z,1516710038.385 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:20:38.386Z,1516710038.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:20:38.386Z,1516710038.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:20:38.398Z,1516710038.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:20:38.398Z,1516710038.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181 2018-01-23T12:20:38.398Z,1516710038.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:20:38.398Z,1516710038.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 181 2018-01-23T12:20:38.745Z,1516710038.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:38.760Z,1516710038.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:20:38.761Z,1516710038.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:20:38.761Z,1516710038.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:20:38.761Z,1516710038.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:20:38.762Z,1516710038.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:20:38.762Z,1516710038.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:20:39.137Z,1516710039.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:39.159Z,1516710039.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:20:39.160Z,1516710039.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:39.540Z,1516710039.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:39.560Z,1516710039.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:20:39.561Z,1516710039.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:39.946Z,1516710039.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:39.969Z,1516710039.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:20:39.970Z,1516710039.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:40.348Z,1516710040.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:40.363Z,1516710040.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:20:40.364Z,1516710040.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:40.747Z,1516710040.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:40.768Z,1516710040.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:20:40.769Z,1516710040.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:41.143Z,1516710041.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:41.159Z,1516710041.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:20:41.160Z,1516710041.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:44.233Z,1516710044.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:44.251Z,1516710044.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T12:20:44.252Z,1516710044.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:44.368Z,1516710044.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:44.412Z,1516710044.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:20:44.413Z,1516710044.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:44.724Z,1516710044.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:44.755Z,1516710044.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:20:44.756Z,1516710044.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:45.114Z,1516710045.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:45.130Z,1516710045.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T12:20:45.131Z,1516710045.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:45.496Z,1516710045.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:45.529Z,1516710045.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T12:20:45.530Z,1516710045.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:45.896Z,1516710045.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:45.928Z,1516710045.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T12:20:45.929Z,1516710045.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:46.301Z,1516710046.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:46.328Z,1516710046.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T12:20:46.329Z,1516710046.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:46.696Z,1516710046.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:46.728Z,1516710046.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T12:20:46.729Z,1516710046.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:47.112Z,1516710047.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:47.142Z,1516710047.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:20:47.144Z,1516710047.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:47.520Z,1516710047.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:47.534Z,1516710047.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T12:20:47.535Z,1516710047.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:47.916Z,1516710047.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:47.936Z,1516710047.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T12:20:47.937Z,1516710047.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:48.296Z,1516710048.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:48.322Z,1516710048.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T12:20:48.323Z,1516710048.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:48.695Z,1516710048.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:48.730Z,1516710048.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T12:20:48.731Z,1516710048.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:49.094Z,1516710049.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:49.121Z,1516710049.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T12:20:49.122Z,1516710049.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:49.505Z,1516710049.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:49.531Z,1516710049.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T12:20:49.532Z,1516710049.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:49.899Z,1516710049.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:49.935Z,1516710049.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T12:20:49.936Z,1516710049.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:50.315Z,1516710050.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:50.333Z,1516710050.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T12:20:50.334Z,1516710050.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:50.717Z,1516710050.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:50.737Z,1516710050.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T12:20:50.738Z,1516710050.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:51.114Z,1516710051.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:51.145Z,1516710051.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:20:51.146Z,1516710051.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:51.504Z,1516710051.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:51.530Z,1516710051.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T12:20:51.531Z,1516710051.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:51.896Z,1516710051.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:51.928Z,1516710051.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T12:20:51.929Z,1516710051.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:52.297Z,1516710052.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:52.333Z,1516710052.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T12:20:52.334Z,1516710052.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:52.702Z,1516710052.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:52.727Z,1516710052.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T12:20:52.728Z,1516710052.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:53.127Z,1516710053.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:53.141Z,1516710053.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:20:53.142Z,1516710053.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:53.520Z,1516710053.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:53.534Z,1516710053.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T12:20:53.535Z,1516710053.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:53.912Z,1516710053.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:53.933Z,1516710053.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T12:20:53.934Z,1516710053.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:54.299Z,1516710054.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:54.325Z,1516710054.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T12:20:54.326Z,1516710054.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:54.718Z,1516710054.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:54.740Z,1516710054.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:20:54.741Z,1516710054.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:55.094Z,1516710055.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:55.117Z,1516710055.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T12:20:55.118Z,1516710055.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:55.497Z,1516710055.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:55.520Z,1516710055.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T12:20:55.521Z,1516710055.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:55.899Z,1516710055.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:55.913Z,1516710055.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T12:20:55.914Z,1516710055.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:56.311Z,1516710056.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:56.337Z,1516710056.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T12:20:56.338Z,1516710056.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:56.715Z,1516710056.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:56.750Z,1516710056.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:20:56.751Z,1516710056.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:57.128Z,1516710057.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:57.148Z,1516710057.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:20:57.149Z,1516710057.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:57.506Z,1516710057.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:57.541Z,1516710057.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:20:57.542Z,1516710057.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:57.904Z,1516710057.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:57.940Z,1516710057.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:20:57.941Z,1516710057.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:58.309Z,1516710058.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:58.324Z,1516710058.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:58.704Z,1516710058.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:58.725Z,1516710058.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:59.120Z,1516710059.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:59.144Z,1516710059.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:59.520Z,1516710059.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:59.546Z,1516710059.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:20:59.920Z,1516710059.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:20:59.944Z,1516710059.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:00.309Z,1516710060.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:00.345Z,1516710060.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:00.708Z,1516710060.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:00.729Z,1516710060.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:01.101Z,1516710061.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:01.124Z,1516710061.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:01.511Z,1516710061.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:01.525Z,1516710061.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:01.910Z,1516710061.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:01.925Z,1516710061.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:02.313Z,1516710062.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:02.329Z,1516710062.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:02.723Z,1516710062.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:02.738Z,1516710062.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:03.123Z,1516710063.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:03.155Z,1516710063.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:03.508Z,1516710063.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:03.523Z,1516710063.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:03.900Z,1516710063.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:03.930Z,1516710063.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:04.302Z,1516710064.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:04.330Z,1516710064.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:04.712Z,1516710064.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:04.729Z,1516710064.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:05.118Z,1516710065.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:05.137Z,1516710065.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:05.522Z,1516710065.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:05.537Z,1516710065.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:05.917Z,1516710065.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:05.937Z,1516710065.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:06.310Z,1516710066.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:06.333Z,1516710066.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:06.713Z,1516710066.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:06.733Z,1516710066.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:07.111Z,1516710067.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:07.130Z,1516710067.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:07.512Z,1516710067.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:07.527Z,1516710067.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:07.909Z,1516710067.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:07.924Z,1516710067.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:08.318Z,1516710068.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:08.333Z,1516710068.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:08.721Z,1516710068.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:08.736Z,1516710068.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:09.118Z,1516710069.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:09.134Z,1516710069.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:09.507Z,1516710069.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:09.522Z,1516710069.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:09.917Z,1516710069.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:09.932Z,1516710069.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:10.301Z,1516710070.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:10.330Z,1516710070.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:10.697Z,1516710070.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:10.726Z,1516710070.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:11.123Z,1516710071.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:11.145Z,1516710071.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:11.527Z,1516710071.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:11.542Z,1516710071.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:11.923Z,1516710071.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:11.938Z,1516710071.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:12.302Z,1516710072.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:12.334Z,1516710072.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:12.699Z,1516710072.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:12.731Z,1516710072.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:13.103Z,1516710073.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:13.130Z,1516710073.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:13.498Z,1516710073.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:13.540Z,1516710073.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:13.921Z,1516710073.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:13.937Z,1516710073.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:14.325Z,1516710074.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:14.345Z,1516710074.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:14.710Z,1516710074.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:14.741Z,1516710074.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:15.107Z,1516710075.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:15.151Z,1516710075.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:15.497Z,1516710075.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:15.540Z,1516710075.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:15.899Z,1516710075.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:15.908Z,1516710075.908 [PNI_TCM](ERROR): CRC does not match. Expected:0x28645 got:0x49796 2018-01-23T12:21:15.939Z,1516710075.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:16.300Z,1516710076.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:16.331Z,1516710076.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:16.696Z,1516710076.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:16.744Z,1516710076.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:17.110Z,1516710077.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:17.140Z,1516710077.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:17.513Z,1516710077.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:17.553Z,1516710077.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:17.920Z,1516710077.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:17.953Z,1516710077.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:18.308Z,1516710078.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:18.349Z,1516710078.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:18.710Z,1516710078.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:18.719Z,1516710078.719 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T12:21:18.745Z,1516710078.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:19.110Z,1516710079.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:19.147Z,1516710079.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:19.504Z,1516710079.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:19.546Z,1516710079.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:19.901Z,1516710079.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:19.946Z,1516710079.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:20.313Z,1516710080.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:20.346Z,1516710080.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:20.717Z,1516710080.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:20.751Z,1516710080.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:21.115Z,1516710081.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:21.151Z,1516710081.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:21.502Z,1516710081.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:21.539Z,1516710081.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:21.905Z,1516710081.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:21.924Z,1516710081.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:22.307Z,1516710082.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:22.324Z,1516710082.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:22.707Z,1516710082.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:22.722Z,1516710082.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:23.108Z,1516710083.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:23.147Z,1516710083.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:23.512Z,1516710083.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:23.556Z,1516710083.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:23.922Z,1516710083.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:23.953Z,1516710083.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:24.312Z,1516710084.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:24.327Z,1516710084.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:24.705Z,1516710084.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:24.732Z,1516710084.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:25.104Z,1516710085.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:25.123Z,1516710085.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:25.504Z,1516710085.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:25.528Z,1516710085.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:25.908Z,1516710085.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:25.929Z,1516710085.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:26.314Z,1516710086.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:26.355Z,1516710086.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:26.713Z,1516710086.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:26.732Z,1516710086.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:27.116Z,1516710087.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:27.136Z,1516710087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:27.510Z,1516710087.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:27.525Z,1516710087.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:27.900Z,1516710087.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:27.954Z,1516710087.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:28.310Z,1516710088.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:28.328Z,1516710088.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:28.708Z,1516710088.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:28.727Z,1516710088.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:29.116Z,1516710089.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:29.131Z,1516710089.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:29.514Z,1516710089.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:29.555Z,1516710089.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:29.913Z,1516710089.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:29.936Z,1516710089.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:30.308Z,1516710090.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:30.327Z,1516710090.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:30.706Z,1516710090.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:30.728Z,1516710090.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:31.108Z,1516710091.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:31.145Z,1516710091.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:31.509Z,1516710091.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:31.524Z,1516710091.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:31.905Z,1516710091.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:31.928Z,1516710091.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:32.320Z,1516710092.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:32.341Z,1516710092.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:32.718Z,1516710092.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:32.759Z,1516710092.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:33.116Z,1516710093.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:33.140Z,1516710093.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:33.506Z,1516710093.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:33.524Z,1516710093.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:33.900Z,1516710093.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:33.933Z,1516710093.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:34.310Z,1516710094.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:34.324Z,1516710094.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:34.708Z,1516710094.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:34.727Z,1516710094.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:35.116Z,1516710095.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:35.134Z,1516710095.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:35.522Z,1516710095.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:35.537Z,1516710095.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:35.915Z,1516710095.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:35.966Z,1516710095.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:36.296Z,1516710096.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:36.331Z,1516710096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:36.709Z,1516710096.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:36.724Z,1516710096.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:37.108Z,1516710097.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:37.130Z,1516710097.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:37.497Z,1516710097.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:37.529Z,1516710097.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:37.895Z,1516710097.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:37.931Z,1516710097.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:38.319Z,1516710098.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:38.338Z,1516710098.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:38.720Z,1516710098.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:38.737Z,1516710098.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:39.113Z,1516710099.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:39.137Z,1516710099.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:39.497Z,1516710099.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:39.533Z,1516710099.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:39.900Z,1516710099.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:39.926Z,1516710099.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:40.297Z,1516710100.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:40.329Z,1516710100.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:40.696Z,1516710100.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:40.722Z,1516710100.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:41.123Z,1516710101.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:41.138Z,1516710101.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:41.519Z,1516710101.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:41.536Z,1516710101.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:44.613Z,1516710104.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:44.629Z,1516710104.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:44.730Z,1516710104.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:44.761Z,1516710104.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:45.084Z,1516710105.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:45.130Z,1516710105.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:45.484Z,1516710105.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:45.507Z,1516710105.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:45.876Z,1516710105.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:45.898Z,1516710105.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:46.290Z,1516710106.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:46.313Z,1516710106.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:46.696Z,1516710106.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:46.717Z,1516710106.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:47.092Z,1516710107.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:47.107Z,1516710107.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:47.472Z,1516710107.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:47.510Z,1516710107.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:47.890Z,1516710107.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:47.905Z,1516710107.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:48.274Z,1516710108.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:48.313Z,1516710108.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:48.688Z,1516710108.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:48.702Z,1516710108.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:49.088Z,1516710109.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:49.111Z,1516710109.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:49.496Z,1516710109.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:49.511Z,1516710109.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:49.889Z,1516710109.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:49.912Z,1516710109.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:50.272Z,1516710110.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:50.316Z,1516710110.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:50.672Z,1516710110.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:50.713Z,1516710110.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:51.072Z,1516710111.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:51.090Z,1516710111.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:51.473Z,1516710111.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:51.490Z,1516710111.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:51.876Z,1516710111.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:51.894Z,1516710111.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:52.297Z,1516710112.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:52.323Z,1516710112.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:52.700Z,1516710112.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:52.728Z,1516710112.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:53.095Z,1516710113.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:53.129Z,1516710113.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:53.484Z,1516710113.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:53.529Z,1516710113.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:53.884Z,1516710113.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:53.899Z,1516710113.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:54.282Z,1516710114.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:54.297Z,1516710114.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:54.678Z,1516710114.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:54.702Z,1516710114.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:55.087Z,1516710115.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:55.102Z,1516710115.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:55.487Z,1516710115.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:55.502Z,1516710115.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:55.886Z,1516710115.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:55.901Z,1516710115.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:56.284Z,1516710116.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:56.304Z,1516710116.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:56.689Z,1516710116.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:56.704Z,1516710116.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:57.080Z,1516710117.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:57.107Z,1516710117.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:57.483Z,1516710117.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:57.498Z,1516710117.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:57.881Z,1516710117.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:57.900Z,1516710117.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:58.290Z,1516710118.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:58.306Z,1516710118.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:58.695Z,1516710118.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:58.710Z,1516710118.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:59.092Z,1516710119.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:59.107Z,1516710119.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:59.477Z,1516710119.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:59.509Z,1516710119.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:21:59.886Z,1516710119.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:21:59.901Z,1516710119.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:00.285Z,1516710120.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:00.301Z,1516710120.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:00.672Z,1516710120.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:00.709Z,1516710120.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:01.097Z,1516710121.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:01.112Z,1516710121.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:01.497Z,1516710121.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:01.521Z,1516710121.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:01.895Z,1516710121.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:01.910Z,1516710121.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:02.273Z,1516710122.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:02.310Z,1516710122.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:02.672Z,1516710122.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:02.704Z,1516710122.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:03.088Z,1516710123.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:03.116Z,1516710123.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:03.500Z,1516710123.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:03.515Z,1516710123.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:03.891Z,1516710123.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:03.906Z,1516710123.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:04.273Z,1516710124.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:04.305Z,1516710124.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:04.672Z,1516710124.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:04.709Z,1516710124.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:05.092Z,1516710125.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:05.107Z,1516710125.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:05.495Z,1516710125.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:05.510Z,1516710125.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:05.886Z,1516710125.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:05.919Z,1516710125.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:06.273Z,1516710126.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:06.305Z,1516710126.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:06.672Z,1516710126.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:06.698Z,1516710126.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:07.090Z,1516710127.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:07.113Z,1516710127.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:07.494Z,1516710127.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:07.509Z,1516710127.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:07.888Z,1516710127.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:07.910Z,1516710127.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:08.273Z,1516710128.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:08.312Z,1516710128.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:08.688Z,1516710128.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:08.709Z,1516710128.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:09.088Z,1516710129.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:09.118Z,1516710129.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:09.496Z,1516710129.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:09.511Z,1516710129.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:09.892Z,1516710129.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:09.907Z,1516710129.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:10.273Z,1516710130.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:10.305Z,1516710130.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:10.672Z,1516710130.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:10.701Z,1516710130.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:11.091Z,1516710131.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:11.107Z,1516710131.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:11.496Z,1516710131.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:11.523Z,1516710131.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:11.883Z,1516710131.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:11.910Z,1516710131.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:12.273Z,1516710132.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:12.289Z,1516710132.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:12.672Z,1516710132.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:12.693Z,1516710132.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:13.091Z,1516710133.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:13.118Z,1516710133.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:13.495Z,1516710133.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:13.521Z,1516710133.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:13.895Z,1516710133.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:13.921Z,1516710133.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:14.277Z,1516710134.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:14.296Z,1516710134.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:14.680Z,1516710134.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:14.717Z,1516710134.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:15.091Z,1516710135.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:15.122Z,1516710135.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:15.495Z,1516710135.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:15.529Z,1516710135.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:15.884Z,1516710135.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:15.899Z,1516710135.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:16.280Z,1516710136.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:16.295Z,1516710136.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:16.680Z,1516710136.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:16.700Z,1516710136.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:17.095Z,1516710137.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:17.126Z,1516710137.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:17.487Z,1516710137.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:17.502Z,1516710137.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:17.895Z,1516710137.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:17.928Z,1516710137.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:18.282Z,1516710138.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:18.297Z,1516710138.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:18.680Z,1516710138.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:18.704Z,1516710138.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:19.087Z,1516710139.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:19.102Z,1516710139.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:19.491Z,1516710139.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:19.506Z,1516710139.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:19.886Z,1516710139.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:19.905Z,1516710139.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:20.282Z,1516710140.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:20.297Z,1516710140.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:20.680Z,1516710140.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:20.696Z,1516710140.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:21.085Z,1516710141.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:21.105Z,1516710141.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:21.487Z,1516710141.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:21.502Z,1516710141.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:21.886Z,1516710141.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:21.905Z,1516710141.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:22.284Z,1516710142.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:22.305Z,1516710142.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:22.681Z,1516710142.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:22.696Z,1516710142.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:23.085Z,1516710143.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:23.105Z,1516710143.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:23.487Z,1516710143.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:23.502Z,1516710143.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:23.887Z,1516710143.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:23.902Z,1516710143.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:24.280Z,1516710144.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:24.300Z,1516710144.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:24.687Z,1516710144.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:24.702Z,1516710144.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:25.087Z,1516710145.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:25.102Z,1516710145.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:25.487Z,1516710145.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:25.502Z,1516710145.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:25.886Z,1516710145.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:25.901Z,1516710145.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:26.279Z,1516710146.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:26.310Z,1516710146.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:26.683Z,1516710146.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:26.699Z,1516710146.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:27.099Z,1516710147.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:27.114Z,1516710147.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:27.492Z,1516710147.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:27.507Z,1516710147.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:27.891Z,1516710147.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:27.906Z,1516710147.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:28.280Z,1516710148.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:28.303Z,1516710148.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:28.683Z,1516710148.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:28.699Z,1516710148.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:29.092Z,1516710149.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:29.107Z,1516710149.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:29.494Z,1516710149.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:29.510Z,1516710149.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:29.893Z,1516710149.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:29.908Z,1516710149.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:30.281Z,1516710150.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:30.297Z,1516710150.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:30.679Z,1516710150.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:30.713Z,1516710150.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:31.092Z,1516710151.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:31.107Z,1516710151.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:31.495Z,1516710151.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:31.517Z,1516710151.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:31.891Z,1516710151.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:31.907Z,1516710151.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:32.273Z,1516710152.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:32.310Z,1516710152.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:32.672Z,1516710152.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:32.709Z,1516710152.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:33.095Z,1516710153.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:33.110Z,1516710153.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:33.495Z,1516710153.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:33.516Z,1516710153.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:33.891Z,1516710153.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:33.906Z,1516710153.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:34.273Z,1516710154.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:34.305Z,1516710154.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:34.672Z,1516710154.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:34.701Z,1516710154.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:35.091Z,1516710155.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:35.106Z,1516710155.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:35.492Z,1516710155.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:35.515Z,1516710155.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:35.882Z,1516710155.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:35.909Z,1516710155.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:36.270Z,1516710156.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:36.294Z,1516710156.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:36.681Z,1516710156.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:36.708Z,1516710156.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:37.073Z,1516710157.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:37.110Z,1516710157.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:37.496Z,1516710157.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:37.511Z,1516710157.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:37.907Z,1516710157.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:37.929Z,1516710157.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:38.284Z,1516710158.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:38.312Z,1516710158.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:38.672Z,1516710158.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:38.709Z,1516710158.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:39.072Z,1516710159.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:39.105Z,1516710159.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:39.477Z,1516710159.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:39.513Z,1516710159.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:39.870Z,1516710159.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:39.885Z,1516710159.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:40.283Z,1516710160.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:40.316Z,1516710160.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:40.696Z,1516710160.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:40.724Z,1516710160.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:41.087Z,1516710161.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:41.118Z,1516710161.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:41.480Z,1516710161.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:41.501Z,1516710161.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:41.882Z,1516710161.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:41.897Z,1516710161.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:44.976Z,1516710164.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:44.997Z,1516710164.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:45.097Z,1516710165.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:45.133Z,1516710165.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:45.499Z,1516710165.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:45.525Z,1516710165.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:45.891Z,1516710165.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:45.906Z,1516710165.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:46.299Z,1516710166.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:46.330Z,1516710166.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:46.681Z,1516710166.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:46.708Z,1516710166.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:47.080Z,1516710167.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:47.099Z,1516710167.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:47.482Z,1516710167.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:47.501Z,1516710167.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:47.881Z,1516710167.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:47.908Z,1516710167.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:48.287Z,1516710168.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:48.303Z,1516710168.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:48.695Z,1516710168.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:48.710Z,1516710168.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:49.099Z,1516710169.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:49.114Z,1516710169.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:49.485Z,1516710169.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:49.500Z,1516710169.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:49.883Z,1516710169.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:49.898Z,1516710169.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:50.285Z,1516710170.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:50.300Z,1516710170.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:50.686Z,1516710170.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:50.704Z,1516710170.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:51.082Z,1516710171.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:51.109Z,1516710171.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:51.491Z,1516710171.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:51.506Z,1516710171.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:51.895Z,1516710171.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:51.910Z,1516710171.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:52.289Z,1516710172.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:52.309Z,1516710172.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:52.685Z,1516710172.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:52.700Z,1516710172.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:53.084Z,1516710173.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:53.099Z,1516710173.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:53.480Z,1516710173.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:53.513Z,1516710173.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:53.889Z,1516710173.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:53.904Z,1516710173.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:54.292Z,1516710174.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:54.312Z,1516710174.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:54.693Z,1516710174.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:54.713Z,1516710174.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:55.094Z,1516710175.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:55.109Z,1516710175.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:55.488Z,1516710175.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:55.509Z,1516710175.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:55.884Z,1516710175.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:55.899Z,1516710175.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:56.294Z,1516710176.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:56.314Z,1516710176.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:56.690Z,1516710176.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:56.705Z,1516710176.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:57.084Z,1516710177.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:57.099Z,1516710177.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:57.494Z,1516710177.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:57.516Z,1516710177.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:57.896Z,1516710177.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:57.910Z,1516710177.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:58.294Z,1516710178.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:58.313Z,1516710178.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:58.689Z,1516710178.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:58.704Z,1516710178.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:59.081Z,1516710179.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:59.100Z,1516710179.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:59.481Z,1516710179.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:59.503Z,1516710179.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:22:59.885Z,1516710179.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:22:59.904Z,1516710179.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:00.291Z,1516710180.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:00.319Z,1516710180.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:00.698Z,1516710180.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:00.717Z,1516710180.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:01.099Z,1516710181.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:01.113Z,1516710181.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:01.488Z,1516710181.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:01.509Z,1516710181.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:01.879Z,1516710181.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:01.913Z,1516710181.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:02.280Z,1516710182.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:02.308Z,1516710182.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:02.677Z,1516710182.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:02.705Z,1516710182.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:03.076Z,1516710183.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:03.109Z,1516710183.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:03.494Z,1516710183.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:03.519Z,1516710183.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:03.901Z,1516710183.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:03.916Z,1516710183.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:04.296Z,1516710184.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:04.311Z,1516710184.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:04.677Z,1516710184.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:04.716Z,1516710184.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:05.076Z,1516710185.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:05.113Z,1516710185.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:05.479Z,1516710185.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:05.506Z,1516710185.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:05.877Z,1516710185.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:05.892Z,1516710185.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:06.289Z,1516710186.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:06.316Z,1516710186.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:06.712Z,1516710186.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:06.733Z,1516710186.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:07.092Z,1516710187.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:07.127Z,1516710187.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:07.485Z,1516710187.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:07.501Z,1516710187.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:07.889Z,1516710187.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:07.905Z,1516710187.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:08.284Z,1516710188.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:08.299Z,1516710188.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:08.682Z,1516710188.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:08.705Z,1516710188.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:09.085Z,1516710189.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:09.101Z,1516710189.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:09.487Z,1516710189.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:09.502Z,1516710189.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:09.899Z,1516710189.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:09.930Z,1516710189.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:10.288Z,1516710190.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:10.302Z,1516710190.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:10.684Z,1516710190.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:10.698Z,1516710190.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:11.080Z,1516710191.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:11.107Z,1516710191.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:11.484Z,1516710191.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:11.502Z,1516710191.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:11.885Z,1516710191.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:11.900Z,1516710191.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:12.290Z,1516710192.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:12.313Z,1516710192.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:12.691Z,1516710192.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:12.706Z,1516710192.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:13.091Z,1516710193.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:13.106Z,1516710193.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:13.479Z,1516710193.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:13.512Z,1516710193.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:13.883Z,1516710193.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:13.904Z,1516710193.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:14.285Z,1516710194.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:14.304Z,1516710194.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:14.690Z,1516710194.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:14.705Z,1516710194.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:15.093Z,1516710195.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:15.108Z,1516710195.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:15.496Z,1516710195.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:15.511Z,1516710195.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:15.899Z,1516710195.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:15.914Z,1516710195.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:16.296Z,1516710196.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:16.317Z,1516710196.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:16.690Z,1516710196.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:16.705Z,1516710196.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:17.074Z,1516710197.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:17.102Z,1516710197.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:17.479Z,1516710197.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:17.515Z,1516710197.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:17.885Z,1516710197.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:17.901Z,1516710197.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:18.295Z,1516710198.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:18.310Z,1516710198.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:18.699Z,1516710198.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:18.719Z,1516710198.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:19.095Z,1516710199.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:19.111Z,1516710199.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:19.480Z,1516710199.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:19.502Z,1516710199.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:19.880Z,1516710199.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:19.902Z,1516710199.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:20.286Z,1516710200.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:20.304Z,1516710200.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:20.684Z,1516710200.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:20.703Z,1516710200.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:21.079Z,1516710201.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:21.110Z,1516710201.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:21.496Z,1516710201.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:21.511Z,1516710201.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:21.895Z,1516710201.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:21.918Z,1516710201.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:22.299Z,1516710202.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:22.314Z,1516710202.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:22.676Z,1516710202.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:22.704Z,1516710202.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:23.074Z,1516710203.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:23.109Z,1516710203.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:23.477Z,1516710203.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:23.509Z,1516710203.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:23.876Z,1516710203.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:23.912Z,1516710203.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:24.292Z,1516710204.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:24.319Z,1516710204.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:24.703Z,1516710204.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:24.718Z,1516710204.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:25.104Z,1516710205.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:25.124Z,1516710205.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:25.481Z,1516710205.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:25.507Z,1516710205.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:25.877Z,1516710205.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:25.909Z,1516710205.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:26.276Z,1516710206.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:26.310Z,1516710206.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:26.677Z,1516710206.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:26.704Z,1516710206.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:27.076Z,1516710207.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:27.102Z,1516710207.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:27.492Z,1516710207.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:27.515Z,1516710207.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:27.899Z,1516710207.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:27.914Z,1516710207.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:28.292Z,1516710208.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:28.322Z,1516710208.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:28.677Z,1516710208.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:28.705Z,1516710208.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:29.074Z,1516710209.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:29.102Z,1516710209.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:29.481Z,1516710209.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:29.507Z,1516710209.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:29.877Z,1516710209.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:29.913Z,1516710209.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:30.295Z,1516710210.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:30.314Z,1516710210.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:30.709Z,1516710210.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:30.729Z,1516710210.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:31.095Z,1516710211.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:31.115Z,1516710211.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:31.476Z,1516710211.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:31.508Z,1516710211.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:31.876Z,1516710211.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:31.909Z,1516710211.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:32.277Z,1516710212.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:32.300Z,1516710212.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:32.677Z,1516710212.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:32.708Z,1516710212.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:33.080Z,1516710213.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:33.116Z,1516710213.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:33.487Z,1516710213.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:33.522Z,1516710213.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:33.904Z,1516710213.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:33.919Z,1516710213.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:34.287Z,1516710214.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:34.313Z,1516710214.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:34.677Z,1516710214.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:34.692Z,1516710214.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:35.084Z,1516710215.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:35.120Z,1516710215.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:35.477Z,1516710215.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:35.492Z,1516710215.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:35.885Z,1516710215.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:35.900Z,1516710215.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:36.292Z,1516710216.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:36.323Z,1516710216.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:36.695Z,1516710216.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:36.710Z,1516710216.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:37.088Z,1516710217.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:37.103Z,1516710217.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:37.483Z,1516710217.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:37.498Z,1516710217.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:37.883Z,1516710217.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:37.898Z,1516710217.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:38.284Z,1516710218.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:38.299Z,1516710218.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:38.682Z,1516710218.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:38.705Z,1516710218.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:38.711Z,1516710218.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:38.711Z,1516710218.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182 2018-01-23T12:23:38.711Z,1516710218.711 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:23:38.736Z,1516710218.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:23:39.080Z,1516710219.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:39.102Z,1516710219.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:39.102Z,1516710219.102 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182 2018-01-23T12:23:39.102Z,1516710219.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:23:39.104Z,1516710219.104 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:39.104Z,1516710219.104 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 182 2018-01-23T12:23:39.104Z,1516710219.104 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:23:39.116Z,1516710219.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:23:39.117Z,1516710219.117 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:23:39.117Z,1516710219.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:23:39.117Z,1516710219.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182 2018-01-23T12:23:39.494Z,1516710219.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:39.509Z,1516710219.509 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:23:39.509Z,1516710219.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:23:39.510Z,1516710219.510 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:23:39.521Z,1516710219.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:23:39.521Z,1516710219.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182 2018-01-23T12:23:39.522Z,1516710219.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:23:39.522Z,1516710219.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 182 2018-01-23T12:23:39.895Z,1516710219.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:39.917Z,1516710219.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:23:39.918Z,1516710219.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:23:39.918Z,1516710219.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:23:39.923Z,1516710219.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:23:39.923Z,1516710219.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:23:39.923Z,1516710219.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:23:40.295Z,1516710220.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:40.310Z,1516710220.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:23:40.311Z,1516710220.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:40.677Z,1516710220.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:40.703Z,1516710220.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:23:40.704Z,1516710220.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:40.712Z,1516710220.712 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:23:40.712Z,1516710220.712 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:23:40.712Z,1516710220.712 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:23:40.712Z,1516710220.712 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:23:41.076Z,1516710221.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:41.112Z,1516710221.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:23:41.113Z,1516710221.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:41.116Z,1516710221.116 [Default:CheckIn:D] Stopped 2018-01-23T12:23:41.116Z,1516710221.116 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:23:41.477Z,1516710221.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:41.500Z,1516710221.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:23:41.501Z,1516710221.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:41.508Z,1516710221.508 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 545.817611 min 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn:E] Stopped 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn] Stopped 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn](INFO): Running loop #54 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn] Running Loop=54 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:23:41.509Z,1516710221.509 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:23:41.881Z,1516710221.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:41.916Z,1516710221.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:23:41.917Z,1516710221.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:44.987Z,1516710224.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:45.002Z,1516710225.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s. 2018-01-23T12:23:45.020Z,1516710225.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:45.121Z,1516710225.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:45.169Z,1516710225.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T12:23:45.170Z,1516710225.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:45.495Z,1516710225.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:45.529Z,1516710225.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:23:45.530Z,1516710225.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:45.879Z,1516710225.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:45.898Z,1516710225.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:23:45.903Z,1516710225.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:46.278Z,1516710226.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:46.300Z,1516710226.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:23:46.301Z,1516710226.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:46.678Z,1516710226.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:46.694Z,1516710226.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:23:46.695Z,1516710226.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:47.076Z,1516710227.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:47.092Z,1516710227.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:23:47.093Z,1516710227.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:47.497Z,1516710227.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:47.531Z,1516710227.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:23:47.532Z,1516710227.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:47.891Z,1516710227.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:47.907Z,1516710227.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:23:47.908Z,1516710227.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:48.290Z,1516710228.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:48.305Z,1516710228.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:23:48.306Z,1516710228.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:48.684Z,1516710228.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:48.706Z,1516710228.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:23:48.707Z,1516710228.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:49.077Z,1516710229.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:49.091Z,1516710229.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:23:49.092Z,1516710229.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:49.472Z,1516710229.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:49.503Z,1516710229.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:23:49.504Z,1516710229.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:49.872Z,1516710229.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:49.894Z,1516710229.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:23:49.895Z,1516710229.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:50.287Z,1516710230.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:50.302Z,1516710230.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:23:50.303Z,1516710230.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:50.690Z,1516710230.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:50.705Z,1516710230.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:23:50.706Z,1516710230.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:51.090Z,1516710231.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:51.105Z,1516710231.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:23:51.106Z,1516710231.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:51.478Z,1516710231.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:51.500Z,1516710231.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:23:51.501Z,1516710231.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:51.872Z,1516710231.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:51.897Z,1516710231.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:23:51.898Z,1516710231.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:52.276Z,1516710232.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:52.298Z,1516710232.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:23:52.299Z,1516710232.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:52.678Z,1516710232.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:52.696Z,1516710232.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:23:52.697Z,1516710232.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:53.076Z,1516710233.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:53.096Z,1516710233.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:23:53.097Z,1516710233.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:53.490Z,1516710233.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:53.512Z,1516710233.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:23:53.513Z,1516710233.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:53.892Z,1516710233.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:53.907Z,1516710233.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:23:53.908Z,1516710233.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:54.291Z,1516710234.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:54.306Z,1516710234.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:23:54.307Z,1516710234.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:54.669Z,1516710234.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:54.705Z,1516710234.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:23:54.706Z,1516710234.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:55.068Z,1516710235.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:55.113Z,1516710235.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:23:55.114Z,1516710235.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:55.470Z,1516710235.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:55.501Z,1516710235.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:23:55.502Z,1516710235.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:55.872Z,1516710235.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:55.899Z,1516710235.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:23:55.900Z,1516710235.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:56.278Z,1516710236.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:56.312Z,1516710236.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:23:56.313Z,1516710236.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:56.696Z,1516710236.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:56.711Z,1516710236.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:23:56.712Z,1516710236.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:57.087Z,1516710237.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:57.103Z,1516710237.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:23:57.104Z,1516710237.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:57.468Z,1516710237.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:57.501Z,1516710237.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:23:57.502Z,1516710237.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:57.873Z,1516710237.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:57.898Z,1516710237.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:23:57.899Z,1516710237.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:58.269Z,1516710238.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:58.295Z,1516710238.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:23:58.296Z,1516710238.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:58.669Z,1516710238.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:58.708Z,1516710238.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:23:58.709Z,1516710238.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:59.073Z,1516710239.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:59.108Z,1516710239.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:59.479Z,1516710239.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:59.505Z,1516710239.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:23:59.883Z,1516710239.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:23:59.919Z,1516710239.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:00.283Z,1516710240.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:00.321Z,1516710240.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:00.669Z,1516710240.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:00.684Z,1516710240.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:01.068Z,1516710241.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:01.083Z,1516710241.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:01.474Z,1516710241.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:01.505Z,1516710241.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:01.880Z,1516710241.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:01.901Z,1516710241.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:02.282Z,1516710242.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:02.297Z,1516710242.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:02.687Z,1516710242.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:02.702Z,1516710242.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:03.084Z,1516710243.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:03.098Z,1516710243.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:03.477Z,1516710243.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:03.492Z,1516710243.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:03.878Z,1516710243.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:03.893Z,1516710243.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:04.276Z,1516710244.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:04.297Z,1516710244.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:04.678Z,1516710244.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:04.693Z,1516710244.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:05.077Z,1516710245.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:05.092Z,1516710245.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:05.482Z,1516710245.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:05.497Z,1516710245.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:05.882Z,1516710245.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:05.897Z,1516710245.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:06.282Z,1516710246.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:06.301Z,1516710246.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:06.679Z,1516710246.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:06.694Z,1516710246.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:07.077Z,1516710247.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:07.092Z,1516710247.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:07.476Z,1516710247.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:07.495Z,1516710247.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:07.876Z,1516710247.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:07.897Z,1516710247.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:08.282Z,1516710248.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:08.298Z,1516710248.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:08.687Z,1516710248.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:08.702Z,1516710248.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:09.082Z,1516710249.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:09.101Z,1516710249.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:09.478Z,1516710249.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:09.493Z,1516710249.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:09.877Z,1516710249.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:09.897Z,1516710249.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:10.282Z,1516710250.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:10.301Z,1516710250.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:10.683Z,1516710250.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:10.698Z,1516710250.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:11.084Z,1516710251.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:11.099Z,1516710251.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:11.473Z,1516710251.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:11.503Z,1516710251.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:11.877Z,1516710251.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:11.896Z,1516710251.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:12.256Z,1516710252.256 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:24:12.256Z,1516710252.256 [NAL9602] Data Fault, FailCount= 5 2018-01-23T12:24:12.256Z,1516710252.256 [NAL9602](ERROR): Data Fault 2018-01-23T12:24:12.289Z,1516710252.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:12.309Z,1516710252.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:12.334Z,1516710252.334 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:24:12.339Z,1516710252.339 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T12:24:12.652Z,1516710252.652 [NAL9602](INFO): Powering down 2018-01-23T12:24:12.670Z,1516710252.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:12.709Z,1516710252.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:12.729Z,1516710252.729 [CBIT](INFO): Critical error at 20180123T122412 2018-01-23T12:24:13.084Z,1516710253.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:13.099Z,1516710253.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:13.473Z,1516710253.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:13.499Z,1516710253.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:13.868Z,1516710253.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:13.900Z,1516710253.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:14.268Z,1516710254.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:14.302Z,1516710254.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:14.672Z,1516710254.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:14.698Z,1516710254.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:15.068Z,1516710255.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:15.100Z,1516710255.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:15.468Z,1516710255.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:15.494Z,1516710255.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:15.868Z,1516710255.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:15.894Z,1516710255.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:16.268Z,1516710256.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:16.300Z,1516710256.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:16.670Z,1516710256.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:16.696Z,1516710256.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:17.068Z,1516710257.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:17.094Z,1516710257.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:17.468Z,1516710257.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:17.500Z,1516710257.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:17.872Z,1516710257.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:17.898Z,1516710257.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:18.272Z,1516710258.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:18.298Z,1516710258.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:18.668Z,1516710258.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:18.700Z,1516710258.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:19.068Z,1516710259.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:19.102Z,1516710259.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:19.472Z,1516710259.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:19.498Z,1516710259.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:19.868Z,1516710259.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:19.899Z,1516710259.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:20.272Z,1516710260.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:20.298Z,1516710260.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:20.672Z,1516710260.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:20.698Z,1516710260.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:21.068Z,1516710261.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:21.099Z,1516710261.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:21.468Z,1516710261.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:21.507Z,1516710261.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:21.870Z,1516710261.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:21.885Z,1516710261.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:22.268Z,1516710262.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:22.289Z,1516710262.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:22.675Z,1516710262.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:22.690Z,1516710262.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:23.070Z,1516710263.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:23.093Z,1516710263.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:23.477Z,1516710263.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:23.492Z,1516710263.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:23.874Z,1516710263.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:23.904Z,1516710263.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:24.273Z,1516710264.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:24.289Z,1516710264.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:24.675Z,1516710264.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:24.695Z,1516710264.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:25.075Z,1516710265.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:25.096Z,1516710265.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:25.475Z,1516710265.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:25.491Z,1516710265.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:25.872Z,1516710265.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:25.893Z,1516710265.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:26.275Z,1516710266.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:26.292Z,1516710266.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:26.678Z,1516710266.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:26.694Z,1516710266.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:27.074Z,1516710267.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:27.098Z,1516710267.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:27.475Z,1516710267.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:27.490Z,1516710267.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:27.875Z,1516710267.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:27.890Z,1516710267.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:28.272Z,1516710268.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:28.295Z,1516710268.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:28.676Z,1516710268.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:28.691Z,1516710268.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:28.704Z,1516710268.704 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:24:29.065Z,1516710269.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:29.097Z,1516710269.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:29.480Z,1516710269.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:29.495Z,1516710269.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:29.868Z,1516710269.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:29.903Z,1516710269.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:30.265Z,1516710270.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:30.301Z,1516710270.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:30.672Z,1516710270.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:30.698Z,1516710270.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:31.068Z,1516710271.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:31.102Z,1516710271.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:31.472Z,1516710271.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:31.498Z,1516710271.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:31.884Z,1516710271.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:31.899Z,1516710271.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:32.269Z,1516710272.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:32.304Z,1516710272.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:32.673Z,1516710272.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:32.699Z,1516710272.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:33.069Z,1516710273.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:33.101Z,1516710273.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:33.469Z,1516710273.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:33.504Z,1516710273.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:33.865Z,1516710273.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:33.894Z,1516710273.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:34.268Z,1516710274.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:34.300Z,1516710274.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:34.668Z,1516710274.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:34.702Z,1516710274.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:35.065Z,1516710275.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:35.088Z,1516710275.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:35.468Z,1516710275.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:35.495Z,1516710275.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:35.868Z,1516710275.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:35.883Z,1516710275.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:36.265Z,1516710276.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:36.280Z,1516710276.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:36.680Z,1516710276.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:36.715Z,1516710276.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:37.076Z,1516710277.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:37.090Z,1516710277.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:37.476Z,1516710277.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:37.491Z,1516710277.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:37.873Z,1516710277.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:37.888Z,1516710277.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:38.272Z,1516710278.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:38.287Z,1516710278.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:38.676Z,1516710278.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:38.691Z,1516710278.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:39.074Z,1516710279.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:39.089Z,1516710279.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:39.477Z,1516710279.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:39.491Z,1516710279.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:39.876Z,1516710279.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:39.892Z,1516710279.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:40.272Z,1516710280.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:40.292Z,1516710280.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:40.672Z,1516710280.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:40.700Z,1516710280.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:41.072Z,1516710281.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:41.087Z,1516710281.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:41.480Z,1516710281.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:41.495Z,1516710281.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:41.874Z,1516710281.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:41.889Z,1516710281.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:42.275Z,1516710282.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:42.290Z,1516710282.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:45.389Z,1516710285.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:45.404Z,1516710285.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:45.499Z,1516710285.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:45.535Z,1516710285.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:45.884Z,1516710285.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:45.899Z,1516710285.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:46.285Z,1516710286.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:46.300Z,1516710286.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:46.682Z,1516710286.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:46.697Z,1516710286.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:47.082Z,1516710287.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:47.097Z,1516710287.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:47.482Z,1516710287.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:47.498Z,1516710287.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:47.882Z,1516710287.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:47.897Z,1516710287.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:48.282Z,1516710288.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:48.297Z,1516710288.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:48.682Z,1516710288.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:48.698Z,1516710288.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:49.080Z,1516710289.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:49.096Z,1516710289.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:49.482Z,1516710289.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:49.504Z,1516710289.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:49.884Z,1516710289.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:49.905Z,1516710289.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:50.280Z,1516710290.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:50.296Z,1516710290.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:50.683Z,1516710290.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:50.697Z,1516710290.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:51.082Z,1516710291.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:51.098Z,1516710291.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:51.485Z,1516710291.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:51.500Z,1516710291.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:51.884Z,1516710291.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:51.904Z,1516710291.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:52.282Z,1516710292.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:52.298Z,1516710292.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:52.683Z,1516710292.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:52.698Z,1516710292.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:53.084Z,1516710293.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:53.104Z,1516710293.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:53.480Z,1516710293.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:53.507Z,1516710293.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:53.883Z,1516710293.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:53.898Z,1516710293.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:54.289Z,1516710294.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:54.309Z,1516710294.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:54.688Z,1516710294.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:54.709Z,1516710294.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:55.086Z,1516710295.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:55.102Z,1516710295.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:55.483Z,1516710295.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:55.498Z,1516710295.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:55.887Z,1516710295.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:55.902Z,1516710295.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:56.287Z,1516710296.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:56.302Z,1516710296.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:56.689Z,1516710296.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:56.703Z,1516710296.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:57.082Z,1516710297.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:57.105Z,1516710297.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:57.483Z,1516710297.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:57.498Z,1516710297.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:57.885Z,1516710297.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:57.899Z,1516710297.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:58.289Z,1516710298.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:58.304Z,1516710298.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:58.683Z,1516710298.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:58.698Z,1516710298.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:59.080Z,1516710299.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:59.108Z,1516710299.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:59.484Z,1516710299.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:59.507Z,1516710299.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:24:59.887Z,1516710299.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:24:59.903Z,1516710299.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:00.282Z,1516710300.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:00.309Z,1516710300.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:00.682Z,1516710300.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:00.705Z,1516710300.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:01.092Z,1516710301.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:01.107Z,1516710301.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:01.493Z,1516710301.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:01.508Z,1516710301.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:01.894Z,1516710301.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:01.909Z,1516710301.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:02.285Z,1516710302.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:02.300Z,1516710302.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:02.689Z,1516710302.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:02.704Z,1516710302.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:03.086Z,1516710303.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:03.110Z,1516710303.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:03.492Z,1516710303.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:03.508Z,1516710303.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:03.880Z,1516710303.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:03.914Z,1516710303.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:04.281Z,1516710304.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:04.309Z,1516710304.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:04.686Z,1516710304.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:04.702Z,1516710304.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:05.088Z,1516710305.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:05.108Z,1516710305.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:05.483Z,1516710305.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:05.515Z,1516710305.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:05.885Z,1516710305.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:05.902Z,1516710305.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:06.285Z,1516710306.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:06.301Z,1516710306.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:06.691Z,1516710306.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:06.707Z,1516710306.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:07.083Z,1516710307.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:07.098Z,1516710307.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:07.484Z,1516710307.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:07.510Z,1516710307.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:07.889Z,1516710307.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:07.904Z,1516710307.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:08.287Z,1516710308.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:08.302Z,1516710308.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:08.687Z,1516710308.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:08.708Z,1516710308.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:09.074Z,1516710309.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:09.109Z,1516710309.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:09.484Z,1516710309.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:09.503Z,1516710309.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:09.888Z,1516710309.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:09.902Z,1516710309.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:10.285Z,1516710310.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:10.300Z,1516710310.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:10.688Z,1516710310.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:10.703Z,1516710310.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:11.094Z,1516710311.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:11.112Z,1516710311.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:11.483Z,1516710311.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:11.508Z,1516710311.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:11.892Z,1516710311.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:11.907Z,1516710311.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:12.284Z,1516710312.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:12.314Z,1516710312.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:12.691Z,1516710312.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:12.706Z,1516710312.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:13.089Z,1516710313.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:13.105Z,1516710313.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:13.496Z,1516710313.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:13.510Z,1516710313.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:13.884Z,1516710313.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:13.910Z,1516710313.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:14.291Z,1516710314.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:14.306Z,1516710314.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:14.685Z,1516710314.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:14.704Z,1516710314.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:15.086Z,1516710315.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:15.102Z,1516710315.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:15.489Z,1516710315.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:15.506Z,1516710315.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:15.884Z,1516710315.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:15.913Z,1516710315.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:16.283Z,1516710316.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:16.299Z,1516710316.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:16.687Z,1516710316.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:16.702Z,1516710316.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:17.083Z,1516710317.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:17.117Z,1516710317.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:17.491Z,1516710317.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:17.499Z,1516710317.499 [PNI_TCM](ERROR): CRC does not match. Expected:0x39986 got:0x15551 2018-01-23T12:25:17.518Z,1516710317.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:17.890Z,1516710317.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:17.905Z,1516710317.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:18.285Z,1516710318.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:18.304Z,1516710318.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:18.687Z,1516710318.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:18.717Z,1516710318.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:19.086Z,1516710319.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:19.095Z,1516710319.095 [PNI_TCM](ERROR): CRC does not match. Expected:0x45613 got:0x0 2018-01-23T12:25:19.121Z,1516710319.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:19.490Z,1516710319.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:19.505Z,1516710319.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:19.884Z,1516710319.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:19.909Z,1516710319.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:20.283Z,1516710320.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:20.317Z,1516710320.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:20.690Z,1516710320.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:20.698Z,1516710320.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T12:25:20.717Z,1516710320.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:21.074Z,1516710321.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:21.108Z,1516710321.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:21.485Z,1516710321.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:21.500Z,1516710321.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:21.883Z,1516710321.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:21.916Z,1516710321.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:22.273Z,1516710322.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:22.323Z,1516710322.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:22.688Z,1516710322.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:22.703Z,1516710322.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:23.085Z,1516710323.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:23.105Z,1516710323.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:23.487Z,1516710323.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:23.513Z,1516710323.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:23.885Z,1516710323.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:23.904Z,1516710323.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:24.287Z,1516710324.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:24.302Z,1516710324.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:24.688Z,1516710324.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:24.704Z,1516710324.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:25.087Z,1516710325.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:25.121Z,1516710325.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:25.487Z,1516710325.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:25.506Z,1516710325.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:25.890Z,1516710325.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:25.905Z,1516710325.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:26.289Z,1516710326.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:26.305Z,1516710326.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:26.684Z,1516710326.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:26.716Z,1516710326.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:27.073Z,1516710327.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:27.103Z,1516710327.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:27.498Z,1516710327.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:27.564Z,1516710327.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:27.877Z,1516710327.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:27.904Z,1516710327.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:28.273Z,1516710328.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:28.300Z,1516710328.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:28.680Z,1516710328.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:28.709Z,1516710328.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:29.076Z,1516710329.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:29.110Z,1516710329.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:29.481Z,1516710329.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:29.508Z,1516710329.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:29.880Z,1516710329.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:29.925Z,1516710329.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:30.280Z,1516710330.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:30.309Z,1516710330.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:30.680Z,1516710330.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:30.710Z,1516710330.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:31.081Z,1516710331.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:31.117Z,1516710331.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:31.476Z,1516710331.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:31.520Z,1516710331.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:31.880Z,1516710331.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:31.910Z,1516710331.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:32.280Z,1516710332.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:32.310Z,1516710332.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:32.698Z,1516710332.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:32.713Z,1516710332.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:33.076Z,1516710333.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:33.109Z,1516710333.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:33.476Z,1516710333.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:33.512Z,1516710333.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:33.876Z,1516710333.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:33.906Z,1516710333.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:34.276Z,1516710334.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:34.306Z,1516710334.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:34.676Z,1516710334.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:34.720Z,1516710334.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:35.080Z,1516710335.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:35.108Z,1516710335.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:35.476Z,1516710335.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:35.512Z,1516710335.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:35.876Z,1516710335.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:35.912Z,1516710335.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:36.280Z,1516710336.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:36.327Z,1516710336.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:36.680Z,1516710336.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:36.706Z,1516710336.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:37.080Z,1516710337.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:37.110Z,1516710337.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:37.476Z,1516710337.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:37.507Z,1516710337.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:37.876Z,1516710337.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:37.913Z,1516710337.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:38.280Z,1516710338.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:38.314Z,1516710338.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:38.676Z,1516710338.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:38.717Z,1516710338.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:39.076Z,1516710339.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:39.092Z,1516710339.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:39.484Z,1516710339.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:39.522Z,1516710339.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:39.879Z,1516710339.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:39.906Z,1516710339.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:40.286Z,1516710340.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:40.301Z,1516710340.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:40.689Z,1516710340.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:40.708Z,1516710340.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:41.082Z,1516710341.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:41.105Z,1516710341.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:41.485Z,1516710341.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:41.505Z,1516710341.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:41.889Z,1516710341.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:41.906Z,1516710341.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:42.284Z,1516710342.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:42.310Z,1516710342.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:45.387Z,1516710345.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:45.403Z,1516710345.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:45.503Z,1516710345.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:45.520Z,1516710345.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:45.850Z,1516710345.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:45.889Z,1516710345.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:46.252Z,1516710346.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:46.272Z,1516710346.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:46.650Z,1516710346.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:46.665Z,1516710346.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:47.048Z,1516710347.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:47.072Z,1516710347.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:47.451Z,1516710347.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:47.466Z,1516710347.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:47.851Z,1516710347.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:47.866Z,1516710347.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:48.248Z,1516710348.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:48.276Z,1516710348.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:48.658Z,1516710348.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:48.672Z,1516710348.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:49.048Z,1516710349.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:49.068Z,1516710349.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:49.451Z,1516710349.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:49.471Z,1516710349.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:49.852Z,1516710349.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:49.872Z,1516710349.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:50.248Z,1516710350.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:50.265Z,1516710350.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:50.648Z,1516710350.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:50.681Z,1516710350.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:51.051Z,1516710351.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:51.067Z,1516710351.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:51.451Z,1516710351.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:51.475Z,1516710351.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:51.850Z,1516710351.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:51.869Z,1516710351.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:52.251Z,1516710352.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:52.272Z,1516710352.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:52.655Z,1516710352.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:52.670Z,1516710352.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:53.050Z,1516710353.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:53.069Z,1516710353.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:53.451Z,1516710353.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:53.466Z,1516710353.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:53.851Z,1516710353.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:53.866Z,1516710353.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:54.246Z,1516710354.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:54.278Z,1516710354.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:54.651Z,1516710354.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:54.672Z,1516710354.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:55.048Z,1516710355.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:55.064Z,1516710355.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:55.452Z,1516710355.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:55.479Z,1516710355.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:55.851Z,1516710355.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:55.866Z,1516710355.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:56.241Z,1516710356.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:56.269Z,1516710356.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:56.645Z,1516710356.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:56.690Z,1516710356.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:57.044Z,1516710357.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:57.070Z,1516710357.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:57.441Z,1516710357.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:57.477Z,1516710357.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:57.848Z,1516710357.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:57.874Z,1516710357.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:58.244Z,1516710358.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:58.276Z,1516710358.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:58.648Z,1516710358.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:58.673Z,1516710358.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:59.044Z,1516710359.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:59.076Z,1516710359.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:59.444Z,1516710359.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:59.479Z,1516710359.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:25:59.844Z,1516710359.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:25:59.871Z,1516710359.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:00.244Z,1516710360.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:00.279Z,1516710360.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:00.648Z,1516710360.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:00.682Z,1516710360.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:01.041Z,1516710361.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:01.056Z,1516710361.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:01.456Z,1516710361.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:01.497Z,1516710361.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:01.865Z,1516710361.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:01.920Z,1516710361.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:02.243Z,1516710362.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:02.278Z,1516710362.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:02.650Z,1516710362.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:02.684Z,1516710362.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:03.045Z,1516710363.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:03.102Z,1516710363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:03.449Z,1516710363.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:03.501Z,1516710363.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:03.850Z,1516710363.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:03.881Z,1516710363.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:04.249Z,1516710364.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:04.302Z,1516710364.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:04.657Z,1516710364.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:04.683Z,1516710364.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:05.052Z,1516710365.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:05.086Z,1516710365.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:05.455Z,1516710365.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:05.497Z,1516710365.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:05.848Z,1516710365.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:05.900Z,1516710365.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:06.248Z,1516710366.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:06.263Z,1516710366.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:06.662Z,1516710366.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:06.740Z,1516710366.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:07.061Z,1516710367.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:07.101Z,1516710367.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:07.462Z,1516710367.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:07.501Z,1516710367.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:07.850Z,1516710367.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:07.905Z,1516710367.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:08.253Z,1516710368.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:08.277Z,1516710368.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:08.662Z,1516710368.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:08.705Z,1516710368.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:09.052Z,1516710369.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:09.107Z,1516710369.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:09.456Z,1516710369.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:09.515Z,1516710369.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:09.860Z,1516710369.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:09.916Z,1516710369.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:10.253Z,1516710370.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:10.277Z,1516710370.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:10.646Z,1516710370.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:10.689Z,1516710370.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:11.055Z,1516710371.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:11.103Z,1516710371.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:11.457Z,1516710371.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:11.507Z,1516710371.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:11.857Z,1516710371.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:11.905Z,1516710371.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:12.258Z,1516710372.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:12.325Z,1516710372.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:12.395Z,1516710372.395 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:26:12.395Z,1516710372.395 [NAL9602] No Fault, FailCount= 5 2018-01-23T12:26:12.628Z,1516710372.628 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:26:12.659Z,1516710372.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:12.707Z,1516710372.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:13.046Z,1516710373.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:13.085Z,1516710373.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:13.450Z,1516710373.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:13.485Z,1516710373.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:13.850Z,1516710373.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:13.904Z,1516710373.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:14.250Z,1516710374.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:14.289Z,1516710374.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:14.654Z,1516710374.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:14.689Z,1516710374.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:15.048Z,1516710375.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:15.084Z,1516710375.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:15.446Z,1516710375.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:15.482Z,1516710375.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:15.850Z,1516710375.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:15.886Z,1516710375.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:16.246Z,1516710376.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:16.304Z,1516710376.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:16.646Z,1516710376.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:16.661Z,1516710376.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:17.050Z,1516710377.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:17.093Z,1516710377.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:17.450Z,1516710377.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:17.508Z,1516710377.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:17.859Z,1516710377.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:17.911Z,1516710377.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:18.255Z,1516710378.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:18.305Z,1516710378.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:18.650Z,1516710378.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:18.697Z,1516710378.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:19.051Z,1516710379.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:19.091Z,1516710379.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:19.453Z,1516710379.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:19.477Z,1516710379.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:19.868Z,1516710379.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:19.909Z,1516710379.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:20.246Z,1516710380.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:20.281Z,1516710380.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:20.650Z,1516710380.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:20.697Z,1516710380.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:21.050Z,1516710381.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:21.111Z,1516710381.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:21.450Z,1516710381.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:21.513Z,1516710381.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:21.849Z,1516710381.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:21.889Z,1516710381.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:22.249Z,1516710382.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:22.290Z,1516710382.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:22.652Z,1516710382.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:22.683Z,1516710382.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:23.063Z,1516710383.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:23.089Z,1516710383.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:23.432Z,1516710383.432 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:26:23.449Z,1516710383.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:23.469Z,1516710383.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:23.849Z,1516710383.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:23.864Z,1516710383.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:24.258Z,1516710384.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:24.273Z,1516710384.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:24.663Z,1516710384.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:24.678Z,1516710384.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:25.055Z,1516710385.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:25.070Z,1516710385.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:25.452Z,1516710385.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:25.480Z,1516710385.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:25.852Z,1516710385.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:25.873Z,1516710385.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:26.252Z,1516710386.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:26.267Z,1516710386.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:26.658Z,1516710386.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:26.675Z,1516710386.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:27.068Z,1516710387.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:27.099Z,1516710387.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:27.460Z,1516710387.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:27.475Z,1516710387.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:27.857Z,1516710387.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:27.880Z,1516710387.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:28.254Z,1516710388.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:28.270Z,1516710388.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:28.653Z,1516710388.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:28.668Z,1516710388.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:29.053Z,1516710389.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:29.068Z,1516710389.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:29.460Z,1516710389.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:29.475Z,1516710389.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:29.858Z,1516710389.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:29.873Z,1516710389.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:30.258Z,1516710390.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:30.281Z,1516710390.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:30.652Z,1516710390.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:30.668Z,1516710390.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:31.050Z,1516710391.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:31.070Z,1516710391.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:31.453Z,1516710391.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:31.467Z,1516710391.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:31.852Z,1516710391.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:31.872Z,1516710391.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:32.252Z,1516710392.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:32.267Z,1516710392.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:32.658Z,1516710392.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:32.680Z,1516710392.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:33.063Z,1516710393.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:33.078Z,1516710393.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:33.458Z,1516710393.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:33.473Z,1516710393.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:33.853Z,1516710393.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:33.868Z,1516710393.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:34.256Z,1516710394.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:34.276Z,1516710394.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:34.657Z,1516710394.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:34.672Z,1516710394.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:35.053Z,1516710395.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:35.067Z,1516710395.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:35.462Z,1516710395.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:35.477Z,1516710395.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:35.861Z,1516710395.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:35.877Z,1516710395.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:36.263Z,1516710396.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:36.284Z,1516710396.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:36.656Z,1516710396.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:36.677Z,1516710396.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:37.056Z,1516710397.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:37.071Z,1516710397.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:37.458Z,1516710397.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:37.480Z,1516710397.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:37.857Z,1516710397.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:37.873Z,1516710397.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:38.244Z,1516710398.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:38.270Z,1516710398.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:38.664Z,1516710398.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:38.684Z,1516710398.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:39.100Z,1516710399.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:39.172Z,1516710399.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:39.462Z,1516710399.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:39.477Z,1516710399.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:39.845Z,1516710399.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:39.872Z,1516710399.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:39.874Z,1516710399.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:39.874Z,1516710399.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183 2018-01-23T12:26:39.874Z,1516710399.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:26:39.886Z,1516710399.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:26:40.256Z,1516710400.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:40.272Z,1516710400.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:40.272Z,1516710400.272 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183 2018-01-23T12:26:40.272Z,1516710400.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:26:40.273Z,1516710400.273 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:40.274Z,1516710400.274 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 183 2018-01-23T12:26:40.274Z,1516710400.274 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:26:40.286Z,1516710400.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:26:40.286Z,1516710400.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:26:40.286Z,1516710400.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:26:40.286Z,1516710400.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183 2018-01-23T12:26:40.645Z,1516710400.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:40.679Z,1516710400.679 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:26:40.680Z,1516710400.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:26:40.680Z,1516710400.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:26:40.692Z,1516710400.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:26:40.692Z,1516710400.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183 2018-01-23T12:26:40.692Z,1516710400.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:26:40.692Z,1516710400.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 183 2018-01-23T12:26:41.044Z,1516710401.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:41.070Z,1516710401.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:26:41.070Z,1516710401.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:26:41.070Z,1516710401.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:26:41.071Z,1516710401.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:26:41.071Z,1516710401.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:26:41.072Z,1516710401.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:26:41.467Z,1516710401.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:41.482Z,1516710401.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:26:41.483Z,1516710401.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:41.867Z,1516710401.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:41.901Z,1516710401.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:26:41.902Z,1516710401.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:42.267Z,1516710402.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:42.288Z,1516710402.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:26:42.289Z,1516710402.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:42.646Z,1516710402.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:42.681Z,1516710402.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:26:42.682Z,1516710402.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:45.737Z,1516710405.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:45.753Z,1516710405.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s. 2018-01-23T12:26:45.754Z,1516710405.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:45.867Z,1516710405.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:45.900Z,1516710405.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:26:45.901Z,1516710405.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:46.243Z,1516710406.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:46.258Z,1516710406.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:26:46.275Z,1516710406.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:46.647Z,1516710406.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:46.662Z,1516710406.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:26:46.676Z,1516710406.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:47.039Z,1516710407.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:47.053Z,1516710407.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:26:47.054Z,1516710407.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:47.432Z,1516710407.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:47.450Z,1516710407.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:26:47.451Z,1516710407.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:47.829Z,1516710407.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:47.864Z,1516710407.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:26:47.865Z,1516710407.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:48.228Z,1516710408.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:48.254Z,1516710408.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:26:48.256Z,1516710408.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:48.643Z,1516710408.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:48.659Z,1516710408.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:26:48.660Z,1516710408.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:49.048Z,1516710409.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:49.063Z,1516710409.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:26:49.064Z,1516710409.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:49.440Z,1516710409.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:49.461Z,1516710409.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:26:49.462Z,1516710409.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:49.825Z,1516710409.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:49.860Z,1516710409.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:26:49.861Z,1516710409.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:50.229Z,1516710410.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:50.265Z,1516710410.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:26:50.266Z,1516710410.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:50.626Z,1516710410.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:50.661Z,1516710410.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:26:50.661Z,1516710410.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:51.025Z,1516710411.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:51.064Z,1516710411.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:26:51.065Z,1516710411.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:51.439Z,1516710411.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:51.467Z,1516710411.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:26:51.468Z,1516710411.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:51.840Z,1516710411.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:51.873Z,1516710411.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:26:51.874Z,1516710411.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:52.235Z,1516710412.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:52.274Z,1516710412.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:26:52.275Z,1516710412.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:52.625Z,1516710412.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:52.640Z,1516710412.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:26:52.655Z,1516710412.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:53.033Z,1516710413.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:53.073Z,1516710413.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:26:53.074Z,1516710413.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:53.432Z,1516710413.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:53.453Z,1516710413.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:26:53.454Z,1516710413.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:53.833Z,1516710413.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:53.848Z,1516710413.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:26:53.849Z,1516710413.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:54.231Z,1516710414.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:54.253Z,1516710414.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:26:54.254Z,1516710414.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:54.640Z,1516710414.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:54.654Z,1516710414.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:26:54.656Z,1516710414.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:55.040Z,1516710415.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:55.054Z,1516710415.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:26:55.055Z,1516710415.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:55.439Z,1516710415.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:55.453Z,1516710415.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:26:55.454Z,1516710415.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:55.838Z,1516710415.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:55.853Z,1516710415.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:26:55.854Z,1516710415.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:56.233Z,1516710416.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:56.248Z,1516710416.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:26:56.249Z,1516710416.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:56.629Z,1516710416.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:56.652Z,1516710416.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:26:56.653Z,1516710416.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:57.032Z,1516710417.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:57.047Z,1516710417.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:26:57.048Z,1516710417.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:57.442Z,1516710417.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:57.458Z,1516710417.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:26:57.459Z,1516710417.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:57.841Z,1516710417.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:57.857Z,1516710417.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:26:57.858Z,1516710417.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:58.241Z,1516710418.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:58.261Z,1516710418.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:26:58.262Z,1516710418.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:58.634Z,1516710418.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:58.648Z,1516710418.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:26:58.649Z,1516710418.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:59.032Z,1516710419.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:59.065Z,1516710419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:26:59.066Z,1516710419.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:59.437Z,1516710419.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:59.451Z,1516710419.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:26:59.452Z,1516710419.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:26:59.832Z,1516710419.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:26:59.852Z,1516710419.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:26:59.853Z,1516710419.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:00.228Z,1516710420.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:00.256Z,1516710420.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:27:00.257Z,1516710420.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:00.641Z,1516710420.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:00.662Z,1516710420.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:01.048Z,1516710421.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:01.063Z,1516710421.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:01.440Z,1516710421.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:01.462Z,1516710421.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:01.825Z,1516710421.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:01.857Z,1516710421.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:02.239Z,1516710422.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:02.254Z,1516710422.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:02.626Z,1516710422.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:02.666Z,1516710422.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:03.024Z,1516710423.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:03.052Z,1516710423.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:03.445Z,1516710423.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:03.465Z,1516710423.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:03.848Z,1516710423.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:03.863Z,1516710423.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:04.241Z,1516710424.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:04.257Z,1516710424.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:04.637Z,1516710424.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:04.653Z,1516710424.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:05.030Z,1516710425.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:05.049Z,1516710425.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:05.431Z,1516710425.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:05.446Z,1516710425.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:05.834Z,1516710425.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:05.850Z,1516710425.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:06.230Z,1516710426.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:06.261Z,1516710426.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:06.640Z,1516710426.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:06.655Z,1516710426.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:07.039Z,1516710427.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:07.054Z,1516710427.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:07.438Z,1516710427.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:07.461Z,1516710427.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:07.832Z,1516710427.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:07.847Z,1516710427.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:08.233Z,1516710428.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:08.248Z,1516710428.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:08.629Z,1516710428.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:08.651Z,1516710428.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:09.032Z,1516710429.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:09.047Z,1516710429.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:09.443Z,1516710429.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:09.458Z,1516710429.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:09.842Z,1516710429.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:09.857Z,1516710429.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:10.242Z,1516710430.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:10.256Z,1516710430.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:10.633Z,1516710430.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:10.659Z,1516710430.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:11.032Z,1516710431.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:11.053Z,1516710431.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:11.432Z,1516710431.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:11.447Z,1516710431.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:11.834Z,1516710431.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:11.849Z,1516710431.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:12.232Z,1516710432.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:12.253Z,1516710432.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:12.642Z,1516710432.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:12.657Z,1516710432.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:13.043Z,1516710433.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:13.058Z,1516710433.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:13.442Z,1516710433.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:13.457Z,1516710433.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:13.832Z,1516710433.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:13.847Z,1516710433.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:14.233Z,1516710434.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:14.248Z,1516710434.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:14.629Z,1516710434.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:14.651Z,1516710434.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:15.032Z,1516710435.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:15.047Z,1516710435.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:15.442Z,1516710435.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:15.458Z,1516710435.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:15.841Z,1516710435.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:15.861Z,1516710435.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:16.242Z,1516710436.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:16.257Z,1516710436.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:16.638Z,1516710436.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:16.657Z,1516710436.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:17.032Z,1516710437.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:17.053Z,1516710437.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:17.432Z,1516710437.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:17.447Z,1516710437.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:17.829Z,1516710437.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:17.867Z,1516710437.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:18.224Z,1516710438.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:18.251Z,1516710438.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:18.642Z,1516710438.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:18.664Z,1516710438.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:19.052Z,1516710439.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:19.067Z,1516710439.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:19.442Z,1516710439.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:19.465Z,1516710439.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:19.824Z,1516710439.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:19.851Z,1516710439.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:20.225Z,1516710440.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:20.252Z,1516710440.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:20.625Z,1516710440.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:20.657Z,1516710440.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:21.028Z,1516710441.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:21.055Z,1516710441.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:21.449Z,1516710441.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:21.469Z,1516710441.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:21.843Z,1516710441.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:21.858Z,1516710441.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:22.252Z,1516710442.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:22.292Z,1516710442.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:22.645Z,1516710442.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:22.670Z,1516710442.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:23.036Z,1516710443.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:23.067Z,1516710443.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:23.430Z,1516710443.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:23.461Z,1516710443.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:23.833Z,1516710443.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:23.849Z,1516710443.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:24.228Z,1516710444.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:24.249Z,1516710444.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:24.639Z,1516710444.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:24.654Z,1516710444.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:25.044Z,1516710445.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:25.058Z,1516710445.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:25.448Z,1516710445.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:25.479Z,1516710445.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:25.836Z,1516710445.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:25.851Z,1516710445.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:26.234Z,1516710446.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:26.253Z,1516710446.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:26.632Z,1516710446.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:26.651Z,1516710446.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:27.032Z,1516710447.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:27.049Z,1516710447.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:27.439Z,1516710447.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:27.461Z,1516710447.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:27.844Z,1516710447.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:27.858Z,1516710447.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:28.242Z,1516710448.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:28.264Z,1516710448.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:28.635Z,1516710448.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:28.650Z,1516710448.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:29.032Z,1516710449.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:29.051Z,1516710449.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:29.433Z,1516710449.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:29.448Z,1516710449.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:29.839Z,1516710449.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:29.861Z,1516710449.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:30.233Z,1516710450.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:30.249Z,1516710450.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:30.643Z,1516710450.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:30.658Z,1516710450.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:31.044Z,1516710451.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:31.059Z,1516710451.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:31.443Z,1516710451.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:31.458Z,1516710451.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:31.833Z,1516710451.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:31.856Z,1516710451.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:32.238Z,1516710452.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:32.253Z,1516710452.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:32.632Z,1516710452.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:32.652Z,1516710452.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:33.034Z,1516710453.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:33.049Z,1516710453.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:33.438Z,1516710453.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:33.458Z,1516710453.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:33.847Z,1516710453.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:33.862Z,1516710453.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:34.247Z,1516710454.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:34.262Z,1516710454.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:34.638Z,1516710454.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:34.653Z,1516710454.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:35.027Z,1516710455.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:35.050Z,1516710455.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:35.436Z,1516710455.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:35.456Z,1516710455.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:35.838Z,1516710455.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:35.854Z,1516710455.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:36.224Z,1516710456.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:36.258Z,1516710456.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:36.643Z,1516710456.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:36.659Z,1516710456.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:37.044Z,1516710457.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:37.060Z,1516710457.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:37.440Z,1516710457.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:37.471Z,1516710457.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:37.824Z,1516710457.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:37.852Z,1516710457.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:38.222Z,1516710458.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:38.245Z,1516710458.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:38.625Z,1516710458.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:38.652Z,1516710458.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:39.024Z,1516710459.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:39.063Z,1516710459.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:39.434Z,1516710459.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:39.469Z,1516710459.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:39.844Z,1516710459.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:39.877Z,1516710459.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:40.258Z,1516710460.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:40.276Z,1516710460.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:40.634Z,1516710460.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:40.665Z,1516710460.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:41.033Z,1516710461.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:41.073Z,1516710461.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:41.444Z,1516710461.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:41.477Z,1516710461.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:41.848Z,1516710461.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:41.874Z,1516710461.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:42.248Z,1516710462.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:42.273Z,1516710462.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:42.637Z,1516710462.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:42.653Z,1516710462.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:43.028Z,1516710463.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:43.043Z,1516710463.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:46.148Z,1516710466.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:46.172Z,1516710466.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:46.292Z,1516710466.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:46.317Z,1516710466.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:46.626Z,1516710466.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:46.645Z,1516710466.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:47.025Z,1516710467.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:47.040Z,1516710467.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:47.416Z,1516710467.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:47.436Z,1516710467.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:47.816Z,1516710467.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:47.849Z,1516710467.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:48.225Z,1516710468.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:48.240Z,1516710468.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:48.630Z,1516710468.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:48.645Z,1516710468.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:49.031Z,1516710469.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:49.046Z,1516710469.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:49.431Z,1516710469.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:49.452Z,1516710469.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:49.823Z,1516710469.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:49.838Z,1516710469.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:50.220Z,1516710470.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:50.235Z,1516710470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:50.621Z,1516710470.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:50.636Z,1516710470.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:51.016Z,1516710471.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:51.038Z,1516710471.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:51.430Z,1516710471.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:51.445Z,1516710471.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:51.830Z,1516710471.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:51.852Z,1516710471.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:52.231Z,1516710472.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:52.246Z,1516710472.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:52.620Z,1516710472.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:52.653Z,1516710472.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:53.025Z,1516710473.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:53.044Z,1516710473.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:53.430Z,1516710473.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:53.446Z,1516710473.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:53.834Z,1516710473.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:53.853Z,1516710473.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:54.235Z,1516710474.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:54.257Z,1516710474.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:54.623Z,1516710474.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:54.638Z,1516710474.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:55.016Z,1516710475.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:55.038Z,1516710475.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:55.431Z,1516710475.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:55.446Z,1516710475.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:55.834Z,1516710475.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:55.849Z,1516710475.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:56.231Z,1516710476.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:56.245Z,1516710476.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:56.620Z,1516710476.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:56.642Z,1516710476.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:57.010Z,1516710477.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:57.041Z,1516710477.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:57.434Z,1516710477.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:57.450Z,1516710477.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:57.835Z,1516710477.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:57.851Z,1516710477.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:58.228Z,1516710478.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:58.255Z,1516710478.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:58.629Z,1516710478.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:58.644Z,1516710478.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:59.013Z,1516710479.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:59.049Z,1516710479.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:59.431Z,1516710479.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:59.446Z,1516710479.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:27:59.836Z,1516710479.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:27:59.863Z,1516710479.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:00.223Z,1516710480.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:00.259Z,1516710480.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:00.617Z,1516710480.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:00.633Z,1516710480.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:01.020Z,1516710481.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:01.057Z,1516710481.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:01.431Z,1516710481.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:01.467Z,1516710481.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:01.835Z,1516710481.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:01.866Z,1516710481.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:02.223Z,1516710482.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:02.238Z,1516710482.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:02.623Z,1516710482.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:02.638Z,1516710482.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:03.020Z,1516710483.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:03.049Z,1516710483.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:03.428Z,1516710483.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:03.443Z,1516710483.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:03.827Z,1516710483.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:03.843Z,1516710483.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:04.226Z,1516710484.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:04.249Z,1516710484.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:04.617Z,1516710484.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:04.649Z,1516710484.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:05.013Z,1516710485.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:05.049Z,1516710485.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:05.423Z,1516710485.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:05.450Z,1516710485.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:05.843Z,1516710485.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:05.859Z,1516710485.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:06.223Z,1516710486.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:06.263Z,1516710486.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:06.613Z,1516710486.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:06.649Z,1516710486.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:07.014Z,1516710487.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:07.045Z,1516710487.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:07.417Z,1516710487.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:07.448Z,1516710487.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:07.828Z,1516710487.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:07.854Z,1516710487.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:08.228Z,1516710488.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:08.254Z,1516710488.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:08.624Z,1516710488.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:08.655Z,1516710488.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:09.018Z,1516710489.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:09.034Z,1516710489.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:09.419Z,1516710489.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:09.434Z,1516710489.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:09.819Z,1516710489.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:09.847Z,1516710489.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:10.219Z,1516710490.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:10.242Z,1516710490.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:10.632Z,1516710490.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:10.648Z,1516710490.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:11.031Z,1516710491.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:11.046Z,1516710491.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:11.455Z,1516710491.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:11.481Z,1516710491.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:11.829Z,1516710491.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:11.844Z,1516710491.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:12.221Z,1516710492.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:12.237Z,1516710492.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:12.621Z,1516710492.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:12.636Z,1516710492.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:13.016Z,1516710493.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:13.053Z,1516710493.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:13.425Z,1516710493.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:13.440Z,1516710493.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:13.830Z,1516710493.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:13.846Z,1516710493.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:14.234Z,1516710494.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:14.250Z,1516710494.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:14.632Z,1516710494.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:14.646Z,1516710494.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:15.016Z,1516710495.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:15.041Z,1516710495.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:15.416Z,1516710495.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:15.441Z,1516710495.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:15.822Z,1516710495.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:15.837Z,1516710495.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:16.216Z,1516710496.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:16.241Z,1516710496.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:16.631Z,1516710496.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:16.646Z,1516710496.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:17.035Z,1516710497.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:17.057Z,1516710497.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:17.435Z,1516710497.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:17.450Z,1516710497.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:17.818Z,1516710497.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:17.845Z,1516710497.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:18.226Z,1516710498.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:18.241Z,1516710498.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:18.625Z,1516710498.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:18.641Z,1516710498.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:19.014Z,1516710499.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:19.049Z,1516710499.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:19.412Z,1516710499.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:19.449Z,1516710499.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:19.833Z,1516710499.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:19.848Z,1516710499.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:20.235Z,1516710500.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:20.250Z,1516710500.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:20.630Z,1516710500.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:20.656Z,1516710500.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:21.012Z,1516710501.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:21.049Z,1516710501.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:21.428Z,1516710501.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:21.449Z,1516710501.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:21.813Z,1516710501.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:21.850Z,1516710501.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:22.213Z,1516710502.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:22.249Z,1516710502.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:22.635Z,1516710502.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:22.651Z,1516710502.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:23.034Z,1516710503.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:23.066Z,1516710503.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:23.423Z,1516710503.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:23.458Z,1516710503.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:23.812Z,1516710503.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:23.849Z,1516710503.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:24.212Z,1516710504.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:24.250Z,1516710504.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:24.616Z,1516710504.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:24.648Z,1516710504.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:25.013Z,1516710505.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:25.044Z,1516710505.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:25.416Z,1516710505.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:25.458Z,1516710505.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:25.827Z,1516710505.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:25.853Z,1516710505.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:26.239Z,1516710506.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:26.255Z,1516710506.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:26.623Z,1516710506.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:26.653Z,1516710506.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:27.013Z,1516710507.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:27.049Z,1516710507.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:27.416Z,1516710507.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:27.453Z,1516710507.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:27.822Z,1516710507.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:27.858Z,1516710507.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:28.220Z,1516710508.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:28.257Z,1516710508.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:28.631Z,1516710508.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:28.665Z,1516710508.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:29.039Z,1516710509.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:29.065Z,1516710509.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:29.435Z,1516710509.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:29.460Z,1516710509.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:29.824Z,1516710509.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:29.865Z,1516710509.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:30.221Z,1516710510.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:30.236Z,1516710510.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:30.617Z,1516710510.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:30.633Z,1516710510.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:31.025Z,1516710511.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:31.040Z,1516710511.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:31.425Z,1516710511.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:31.440Z,1516710511.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:31.836Z,1516710511.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:31.867Z,1516710511.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:32.231Z,1516710512.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:32.246Z,1516710512.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:32.627Z,1516710512.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:32.692Z,1516710512.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:33.025Z,1516710513.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:33.045Z,1516710513.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:33.420Z,1516710513.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:33.441Z,1516710513.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:33.822Z,1516710513.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:33.837Z,1516710513.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:34.218Z,1516710514.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:34.242Z,1516710514.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:34.639Z,1516710514.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:34.654Z,1516710514.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:35.030Z,1516710515.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:35.045Z,1516710515.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:35.430Z,1516710515.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:35.445Z,1516710515.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:35.821Z,1516710515.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:35.841Z,1516710515.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:36.229Z,1516710516.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:36.243Z,1516710516.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:36.624Z,1516710516.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:36.639Z,1516710516.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:37.017Z,1516710517.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:37.044Z,1516710517.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:37.427Z,1516710517.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:37.442Z,1516710517.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:37.834Z,1516710517.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:37.857Z,1516710517.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:38.235Z,1516710518.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:38.250Z,1516710518.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:38.631Z,1516710518.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:38.646Z,1516710518.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:39.022Z,1516710519.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:39.037Z,1516710519.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:39.420Z,1516710519.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:39.451Z,1516710519.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:39.830Z,1516710519.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:39.845Z,1516710519.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:40.224Z,1516710520.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:40.243Z,1516710520.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:40.628Z,1516710520.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:40.655Z,1516710520.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:41.036Z,1516710521.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:41.051Z,1516710521.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:41.443Z,1516710521.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:41.458Z,1516710521.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:41.812Z,1516710521.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:41.848Z,1516710521.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:41.852Z,1516710521.852 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:23:41.5Z 2018-01-23T12:28:41.852Z,1516710521.852 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:28:41.852Z,1516710521.852 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:28:42.214Z,1516710522.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:42.245Z,1516710522.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:42.746Z,1516710522.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:42.762Z,1516710522.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:43.033Z,1516710523.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:43.053Z,1516710523.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:46.285Z,1516710526.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:46.301Z,1516710526.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:46.375Z,1516710526.375 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0216.lzma 2018-01-23T12:28:46.412Z,1516710526.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:46.452Z,1516710526.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:46.768Z,1516710526.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:46.782Z,1516710526.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:47.125Z,1516710527.125 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0216.lzma.bak 2018-01-23T12:28:47.126Z,1516710527.126 [DataOverHttps](INFO): SBD MOMSN=7755568 2018-01-23T12:28:47.166Z,1516710527.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:47.181Z,1516710527.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:47.794Z,1516710527.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:47.812Z,1516710527.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:47.949Z,1516710527.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:47.985Z,1516710527.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:51.061Z,1516710531.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:51.077Z,1516710531.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:51.201Z,1516710531.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:51.237Z,1516710531.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:51.563Z,1516710531.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:51.588Z,1516710531.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:51.957Z,1516710531.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:51.972Z,1516710531.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:52.341Z,1516710532.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:52.368Z,1516710532.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:52.742Z,1516710532.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:52.777Z,1516710532.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:55.836Z,1516710535.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:55.860Z,1516710535.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:55.948Z,1516710535.948 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0217.lzma 2018-01-23T12:28:55.980Z,1516710535.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:56.024Z,1516710536.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:56.320Z,1516710536.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:56.334Z,1516710536.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:56.681Z,1516710536.681 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0217.lzma.bak 2018-01-23T12:28:56.682Z,1516710536.682 [DataOverHttps](INFO): SBD MOMSN=7755571 2018-01-23T12:28:56.722Z,1516710536.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:56.748Z,1516710536.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:57.346Z,1516710537.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:57.378Z,1516710537.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:28:57.381Z,1516710537.381 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:28:57.381Z,1516710537.381 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:28:57.381Z,1516710537.381 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:28:57.501Z,1516710537.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:28:57.529Z,1516710537.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:00.629Z,1516710540.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:00.645Z,1516710540.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:00.737Z,1516710540.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:00.784Z,1516710540.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:01.134Z,1516710541.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:01.150Z,1516710541.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:01.539Z,1516710541.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:01.555Z,1516710541.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:01.936Z,1516710541.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:01.951Z,1516710541.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:02.328Z,1516710542.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:02.343Z,1516710542.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:02.730Z,1516710542.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:02.745Z,1516710542.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:03.124Z,1516710543.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:03.144Z,1516710543.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:03.534Z,1516710543.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:03.549Z,1516710543.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:03.935Z,1516710543.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:03.950Z,1516710543.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:04.334Z,1516710544.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:04.357Z,1516710544.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:04.728Z,1516710544.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:04.747Z,1516710544.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:05.126Z,1516710545.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:05.153Z,1516710545.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:05.538Z,1516710545.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:05.554Z,1516710545.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:05.943Z,1516710545.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:05.958Z,1516710545.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:06.339Z,1516710546.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:06.361Z,1516710546.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:06.722Z,1516710546.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:06.757Z,1516710546.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:07.121Z,1516710547.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:07.153Z,1516710547.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:07.540Z,1516710547.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:07.567Z,1516710547.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:07.947Z,1516710547.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:07.963Z,1516710547.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:08.336Z,1516710548.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:08.358Z,1516710548.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:08.721Z,1516710548.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:08.760Z,1516710548.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:09.118Z,1516710549.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:09.133Z,1516710549.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:09.531Z,1516710549.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:09.558Z,1516710549.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:09.935Z,1516710549.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:09.971Z,1516710549.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:10.331Z,1516710550.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:10.368Z,1516710550.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:10.720Z,1516710550.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:10.757Z,1516710550.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:11.125Z,1516710551.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:11.140Z,1516710551.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:11.528Z,1516710551.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:11.569Z,1516710551.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:11.939Z,1516710551.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:11.974Z,1516710551.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:12.347Z,1516710552.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:12.374Z,1516710552.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:12.739Z,1516710552.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:12.773Z,1516710552.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:13.132Z,1516710553.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:13.169Z,1516710553.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:13.528Z,1516710553.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:13.543Z,1516710553.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:13.926Z,1516710553.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:13.945Z,1516710553.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:14.326Z,1516710554.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:14.348Z,1516710554.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:14.734Z,1516710554.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:14.749Z,1516710554.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:15.131Z,1516710555.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:15.146Z,1516710555.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:15.532Z,1516710555.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:15.546Z,1516710555.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:15.928Z,1516710555.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:15.943Z,1516710555.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:16.326Z,1516710556.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:16.350Z,1516710556.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:16.728Z,1516710556.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:16.749Z,1516710556.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:17.130Z,1516710557.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:17.145Z,1516710557.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:17.528Z,1516710557.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:17.543Z,1516710557.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:17.933Z,1516710557.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:17.953Z,1516710557.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:18.334Z,1516710558.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:18.349Z,1516710558.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:18.736Z,1516710558.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:18.751Z,1516710558.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:19.128Z,1516710559.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:19.143Z,1516710559.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:19.529Z,1516710559.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:19.544Z,1516710559.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:19.929Z,1516710559.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:19.944Z,1516710559.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:20.328Z,1516710560.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:20.343Z,1516710560.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:20.734Z,1516710560.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:20.749Z,1516710560.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:21.133Z,1516710561.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:21.153Z,1516710561.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:21.536Z,1516710561.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:21.579Z,1516710561.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:21.929Z,1516710561.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:21.944Z,1516710561.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:22.319Z,1516710562.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:22.380Z,1516710562.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:22.722Z,1516710562.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:22.737Z,1516710562.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:23.123Z,1516710563.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:23.137Z,1516710563.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:23.524Z,1516710563.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:23.545Z,1516710563.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:23.935Z,1516710563.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:23.950Z,1516710563.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:24.335Z,1516710564.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:24.356Z,1516710564.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:24.731Z,1516710564.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:24.746Z,1516710564.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:25.125Z,1516710565.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:25.140Z,1516710565.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:25.522Z,1516710565.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:25.537Z,1516710565.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:25.923Z,1516710565.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:25.938Z,1516710565.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:26.325Z,1516710566.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:26.352Z,1516710566.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:26.741Z,1516710566.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:26.756Z,1516710566.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:27.143Z,1516710567.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:27.169Z,1516710567.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:27.539Z,1516710567.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:27.554Z,1516710567.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:27.920Z,1516710567.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:27.954Z,1516710567.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:28.318Z,1516710568.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:28.341Z,1516710568.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:28.720Z,1516710568.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:28.756Z,1516710568.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:29.121Z,1516710569.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:29.158Z,1516710569.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:29.524Z,1516710569.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:29.557Z,1516710569.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:29.931Z,1516710569.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:29.966Z,1516710569.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:30.345Z,1516710570.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:30.359Z,1516710570.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:30.743Z,1516710570.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:30.758Z,1516710570.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:31.120Z,1516710571.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:31.156Z,1516710571.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:31.520Z,1516710571.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:31.558Z,1516710571.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:31.925Z,1516710571.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:31.957Z,1516710571.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:32.328Z,1516710572.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:32.356Z,1516710572.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:32.735Z,1516710572.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:32.750Z,1516710572.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:33.135Z,1516710573.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:33.150Z,1516710573.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:33.535Z,1516710573.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:33.550Z,1516710573.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:33.930Z,1516710573.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:33.945Z,1516710573.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:34.330Z,1516710574.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:34.345Z,1516710574.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:34.729Z,1516710574.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:34.744Z,1516710574.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:35.134Z,1516710575.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:35.156Z,1516710575.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:35.534Z,1516710575.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:35.549Z,1516710575.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:35.936Z,1516710575.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:35.951Z,1516710575.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:36.335Z,1516710576.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:36.350Z,1516710576.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:36.740Z,1516710576.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:36.755Z,1516710576.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:37.125Z,1516710577.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:37.153Z,1516710577.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:37.528Z,1516710577.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:37.556Z,1516710577.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:37.929Z,1516710577.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:37.950Z,1516710577.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:38.337Z,1516710578.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:38.352Z,1516710578.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:38.739Z,1516710578.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:38.761Z,1516710578.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:39.138Z,1516710579.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:39.155Z,1516710579.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:39.536Z,1516710579.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:39.563Z,1516710579.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:39.938Z,1516710579.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:39.954Z,1516710579.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:40.318Z,1516710580.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:40.346Z,1516710580.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:40.720Z,1516710580.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:40.758Z,1516710580.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:40.764Z,1516710580.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:40.764Z,1516710580.764 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184 2018-01-23T12:29:40.764Z,1516710580.764 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:29:40.789Z,1516710580.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:29:41.121Z,1516710581.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:41.149Z,1516710581.149 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:41.149Z,1516710581.149 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184 2018-01-23T12:29:41.149Z,1516710581.149 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:29:41.151Z,1516710581.151 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:41.151Z,1516710581.151 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 184 2018-01-23T12:29:41.151Z,1516710581.151 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:29:41.164Z,1516710581.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:29:41.164Z,1516710581.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:29:41.164Z,1516710581.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:29:41.164Z,1516710581.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184 2018-01-23T12:29:41.524Z,1516710581.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:41.556Z,1516710581.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:29:41.556Z,1516710581.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:29:41.556Z,1516710581.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:29:41.569Z,1516710581.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:29:41.569Z,1516710581.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184 2018-01-23T12:29:41.570Z,1516710581.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:29:41.570Z,1516710581.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 184 2018-01-23T12:29:41.951Z,1516710581.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:41.965Z,1516710581.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:29:41.965Z,1516710581.965 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:29:41.966Z,1516710581.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:29:41.966Z,1516710581.966 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:29:41.968Z,1516710581.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:29:41.968Z,1516710581.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:29:42.344Z,1516710582.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:42.364Z,1516710582.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:29:42.365Z,1516710582.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:42.746Z,1516710582.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:42.770Z,1516710582.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:29:42.772Z,1516710582.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:43.132Z,1516710583.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:43.158Z,1516710583.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:29:43.159Z,1516710583.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:43.524Z,1516710583.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:43.558Z,1516710583.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:29:43.559Z,1516710583.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:43.925Z,1516710583.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:43.956Z,1516710583.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:29:43.957Z,1516710583.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:44.319Z,1516710584.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:44.356Z,1516710584.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:29:44.357Z,1516710584.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:44.745Z,1516710584.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:44.760Z,1516710584.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:29:44.761Z,1516710584.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:45.143Z,1516710585.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:45.161Z,1516710585.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:29:45.162Z,1516710585.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:45.531Z,1516710585.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:45.566Z,1516710585.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:29:45.568Z,1516710585.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:45.921Z,1516710585.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:45.958Z,1516710585.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:29:45.959Z,1516710585.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:46.321Z,1516710586.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:46.344Z,1516710586.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:29:46.345Z,1516710586.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:46.729Z,1516710586.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:46.761Z,1516710586.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:29:46.762Z,1516710586.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:47.121Z,1516710587.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:47.136Z,1516710587.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:29:47.137Z,1516710587.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:47.521Z,1516710587.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:47.540Z,1516710587.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:29:47.541Z,1516710587.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:47.944Z,1516710587.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:47.971Z,1516710587.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:29:47.972Z,1516710587.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:48.340Z,1516710588.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:48.367Z,1516710588.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:29:48.368Z,1516710588.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:48.735Z,1516710588.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:48.769Z,1516710588.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:29:48.769Z,1516710588.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:49.132Z,1516710589.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:49.165Z,1516710589.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:29:49.166Z,1516710589.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:49.531Z,1516710589.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:49.545Z,1516710589.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:29:49.546Z,1516710589.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:49.930Z,1516710589.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:49.948Z,1516710589.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:29:49.949Z,1516710589.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:50.329Z,1516710590.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:50.344Z,1516710590.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:29:50.345Z,1516710590.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:50.731Z,1516710590.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:50.746Z,1516710590.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:29:50.747Z,1516710590.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:51.132Z,1516710591.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:51.152Z,1516710591.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:29:51.153Z,1516710591.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:51.539Z,1516710591.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:51.554Z,1516710591.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:29:51.555Z,1516710591.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:51.937Z,1516710591.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:51.951Z,1516710591.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:29:51.952Z,1516710591.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:52.324Z,1516710592.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:52.346Z,1516710592.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:29:52.347Z,1516710592.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:52.726Z,1516710592.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:52.749Z,1516710592.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:29:52.750Z,1516710592.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:53.132Z,1516710593.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:53.147Z,1516710593.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:29:53.148Z,1516710593.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:53.536Z,1516710593.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:53.551Z,1516710593.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:29:53.552Z,1516710593.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:53.938Z,1516710593.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:53.953Z,1516710593.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:29:53.954Z,1516710593.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:54.342Z,1516710594.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:54.356Z,1516710594.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:29:54.357Z,1516710594.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:54.739Z,1516710594.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:54.753Z,1516710594.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:29:54.754Z,1516710594.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:55.136Z,1516710595.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:55.151Z,1516710595.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:29:55.152Z,1516710595.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:55.537Z,1516710595.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:55.551Z,1516710595.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:29:55.552Z,1516710595.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:55.927Z,1516710595.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:55.950Z,1516710595.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:29:55.951Z,1516710595.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:56.329Z,1516710596.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:56.348Z,1516710596.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:29:56.349Z,1516710596.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:56.738Z,1516710596.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:56.753Z,1516710596.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:29:56.754Z,1516710596.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:57.138Z,1516710597.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:57.156Z,1516710597.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:29:57.157Z,1516710597.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:57.540Z,1516710597.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:57.555Z,1516710597.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:29:57.556Z,1516710597.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:29:57.927Z,1516710597.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:29:57.960Z,1516710597.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:29:57.961Z,1516710597.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:01.039Z,1516710601.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:01.054Z,1516710601.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T12:30:01.055Z,1516710601.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:01.149Z,1516710601.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:01.189Z,1516710601.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:01.542Z,1516710601.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:01.565Z,1516710601.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:01.947Z,1516710601.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:01.962Z,1516710601.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:02.338Z,1516710602.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:02.353Z,1516710602.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:02.733Z,1516710602.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:02.748Z,1516710602.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:03.131Z,1516710603.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:03.146Z,1516710603.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:03.529Z,1516710603.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:03.548Z,1516710603.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:03.936Z,1516710603.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:03.953Z,1516710603.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:04.336Z,1516710604.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:04.351Z,1516710604.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:04.736Z,1516710604.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:04.752Z,1516710604.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:05.126Z,1516710605.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:05.154Z,1516710605.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:05.529Z,1516710605.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:05.565Z,1516710605.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:05.936Z,1516710605.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:05.943Z,1516710605.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x39376 got:0x49796 2018-01-23T12:30:05.985Z,1516710605.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:06.331Z,1516710606.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:06.347Z,1516710606.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:06.739Z,1516710606.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:06.755Z,1516710606.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:07.138Z,1516710607.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:07.156Z,1516710607.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:07.539Z,1516710607.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:07.554Z,1516710607.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:07.933Z,1516710607.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:07.948Z,1516710607.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:08.330Z,1516710608.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:08.345Z,1516710608.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:08.724Z,1516710608.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:08.761Z,1516710608.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:09.136Z,1516710609.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:09.152Z,1516710609.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:09.534Z,1516710609.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:09.549Z,1516710609.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:09.940Z,1516710609.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:09.955Z,1516710609.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:10.338Z,1516710610.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:10.379Z,1516710610.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:10.741Z,1516710610.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:10.748Z,1516710610.748 [PNI_TCM](ERROR): CRC does not match. Expected:0x46992 got:0x49716 2018-01-23T12:30:10.788Z,1516710610.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:11.125Z,1516710611.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:11.158Z,1516710611.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:11.536Z,1516710611.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:11.552Z,1516710611.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:11.928Z,1516710611.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:11.965Z,1516710611.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:12.333Z,1516710612.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:12.352Z,1516710612.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:12.742Z,1516710612.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:12.757Z,1516710612.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:13.143Z,1516710613.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:13.158Z,1516710613.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:13.539Z,1516710613.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:13.579Z,1516710613.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:13.930Z,1516710613.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:13.939Z,1516710613.939 [PNI_TCM](ERROR): CRC does not match. Expected:0x14800 got:0x14616 2018-01-23T12:30:13.965Z,1516710613.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:14.340Z,1516710614.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:14.347Z,1516710614.347 [PNI_TCM](ERROR): CRC does not match. Expected:0x29799 got:0x16910 2018-01-23T12:30:14.382Z,1516710614.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:14.740Z,1516710614.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:14.756Z,1516710614.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:15.132Z,1516710615.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:15.165Z,1516710615.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:15.528Z,1516710615.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:15.561Z,1516710615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:15.947Z,1516710615.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:15.962Z,1516710615.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:16.347Z,1516710616.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:16.362Z,1516710616.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:16.742Z,1516710616.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:16.788Z,1516710616.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:17.120Z,1516710617.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:17.159Z,1516710617.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:17.520Z,1516710617.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:17.554Z,1516710617.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:17.921Z,1516710617.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:17.960Z,1516710617.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:18.320Z,1516710618.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:18.363Z,1516710618.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:18.731Z,1516710618.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:18.769Z,1516710618.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:19.136Z,1516710619.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:19.173Z,1516710619.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:19.533Z,1516710619.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:19.561Z,1516710619.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:19.921Z,1516710619.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:19.968Z,1516710619.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:20.320Z,1516710620.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:20.357Z,1516710620.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:20.725Z,1516710620.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:20.766Z,1516710620.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:21.127Z,1516710621.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:21.157Z,1516710621.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:21.528Z,1516710621.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:21.577Z,1516710621.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:21.935Z,1516710621.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:21.974Z,1516710621.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:22.340Z,1516710622.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:22.377Z,1516710622.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:22.745Z,1516710622.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:22.767Z,1516710622.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:23.125Z,1516710623.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:23.149Z,1516710623.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:23.525Z,1516710623.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:23.560Z,1516710623.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:23.930Z,1516710623.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:23.948Z,1516710623.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:24.328Z,1516710624.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:24.347Z,1516710624.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:24.743Z,1516710624.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:24.758Z,1516710624.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:25.136Z,1516710625.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:25.151Z,1516710625.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:25.534Z,1516710625.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:25.553Z,1516710625.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:25.930Z,1516710625.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:25.949Z,1516710625.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:26.329Z,1516710626.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:26.344Z,1516710626.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:26.728Z,1516710626.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:26.743Z,1516710626.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:27.130Z,1516710627.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:27.146Z,1516710627.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:27.528Z,1516710627.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:27.548Z,1516710627.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:27.937Z,1516710627.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:27.960Z,1516710627.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:28.342Z,1516710628.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:28.359Z,1516710628.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:28.738Z,1516710628.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:28.758Z,1516710628.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:29.128Z,1516710629.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:29.146Z,1516710629.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:29.529Z,1516710629.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:29.544Z,1516710629.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:29.925Z,1516710629.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:29.947Z,1516710629.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:30.328Z,1516710630.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:30.348Z,1516710630.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:30.744Z,1516710630.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:30.762Z,1516710630.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:31.142Z,1516710631.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:31.188Z,1516710631.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:31.539Z,1516710631.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:31.560Z,1516710631.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:31.933Z,1516710631.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:31.948Z,1516710631.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:32.330Z,1516710632.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:32.356Z,1516710632.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:32.728Z,1516710632.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:32.743Z,1516710632.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:33.130Z,1516710633.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:33.145Z,1516710633.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:33.524Z,1516710633.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:33.546Z,1516710633.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:33.939Z,1516710633.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:33.958Z,1516710633.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:34.342Z,1516710634.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:34.357Z,1516710634.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:34.738Z,1516710634.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:34.753Z,1516710634.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:35.127Z,1516710635.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:35.153Z,1516710635.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:35.530Z,1516710635.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:35.545Z,1516710635.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:35.925Z,1516710635.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:35.948Z,1516710635.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:36.329Z,1516710636.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:36.348Z,1516710636.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:36.739Z,1516710636.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:36.761Z,1516710636.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:37.145Z,1516710637.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:37.164Z,1516710637.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:37.543Z,1516710637.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:37.558Z,1516710637.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:37.921Z,1516710637.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:37.948Z,1516710637.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:38.320Z,1516710638.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:38.353Z,1516710638.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:38.732Z,1516710638.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:38.747Z,1516710638.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:39.135Z,1516710639.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:39.150Z,1516710639.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:39.520Z,1516710639.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:39.553Z,1516710639.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:39.939Z,1516710639.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:39.954Z,1516710639.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:40.344Z,1516710640.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:40.360Z,1516710640.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:40.738Z,1516710640.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:40.753Z,1516710640.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:41.120Z,1516710641.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:41.147Z,1516710641.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:41.521Z,1516710641.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:41.557Z,1516710641.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:41.921Z,1516710641.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:41.952Z,1516710641.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:42.320Z,1516710642.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:42.347Z,1516710642.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:42.740Z,1516710642.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:42.755Z,1516710642.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:43.143Z,1516710643.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:43.158Z,1516710643.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:43.538Z,1516710643.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:43.553Z,1516710643.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:43.938Z,1516710643.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:43.953Z,1516710643.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:44.321Z,1516710644.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:44.357Z,1516710644.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:44.738Z,1516710644.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:44.760Z,1516710644.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:45.146Z,1516710645.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:45.161Z,1516710645.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:45.543Z,1516710645.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:45.557Z,1516710645.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:45.921Z,1516710645.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:45.947Z,1516710645.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:46.321Z,1516710646.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:46.357Z,1516710646.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:46.743Z,1516710646.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:46.758Z,1516710646.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:47.143Z,1516710647.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:47.164Z,1516710647.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:47.540Z,1516710647.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:47.555Z,1516710647.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:47.921Z,1516710647.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:47.952Z,1516710647.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:48.320Z,1516710648.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:48.352Z,1516710648.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:48.744Z,1516710648.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:48.760Z,1516710648.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:49.142Z,1516710649.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:49.157Z,1516710649.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:49.534Z,1516710649.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:49.565Z,1516710649.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:49.921Z,1516710649.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:49.957Z,1516710649.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:50.324Z,1516710650.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:50.350Z,1516710650.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:50.740Z,1516710650.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:50.755Z,1516710650.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:51.141Z,1516710651.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:51.164Z,1516710651.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:51.531Z,1516710651.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:51.566Z,1516710651.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:51.921Z,1516710651.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:51.960Z,1516710651.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:52.321Z,1516710652.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:52.361Z,1516710652.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:52.731Z,1516710652.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:52.762Z,1516710652.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:53.139Z,1516710653.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:53.163Z,1516710653.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:53.535Z,1516710653.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:53.566Z,1516710653.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:53.928Z,1516710653.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:53.943Z,1516710653.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:54.329Z,1516710654.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:54.365Z,1516710654.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:54.740Z,1516710654.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:54.771Z,1516710654.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:55.135Z,1516710655.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:55.156Z,1516710655.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:55.536Z,1516710655.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:55.553Z,1516710655.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:55.934Z,1516710655.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:55.949Z,1516710655.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:56.328Z,1516710656.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:56.349Z,1516710656.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:56.739Z,1516710656.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:56.754Z,1516710656.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:57.138Z,1516710657.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:57.154Z,1516710657.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:57.536Z,1516710657.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:57.560Z,1516710657.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:57.929Z,1516710657.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:57.944Z,1516710657.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:30:58.331Z,1516710658.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:30:58.346Z,1516710658.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:03.805Z,1516710663.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:03.846Z,1516710663.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:03.980Z,1516710663.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:04.043Z,1516710664.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:04.342Z,1516710664.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:04.397Z,1516710664.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:04.741Z,1516710664.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:04.769Z,1516710664.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:05.128Z,1516710665.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:05.171Z,1516710665.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:05.531Z,1516710665.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:05.602Z,1516710665.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:05.935Z,1516710665.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:05.972Z,1516710665.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:06.340Z,1516710666.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:06.373Z,1516710666.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:06.736Z,1516710666.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:06.762Z,1516710666.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:07.124Z,1516710667.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:07.161Z,1516710667.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:07.528Z,1516710667.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:07.544Z,1516710667.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:07.937Z,1516710667.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:07.977Z,1516710667.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:08.330Z,1516710668.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:08.346Z,1516710668.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:08.739Z,1516710668.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:08.771Z,1516710668.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:09.143Z,1516710669.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:09.158Z,1516710669.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:09.535Z,1516710669.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:09.551Z,1516710669.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:09.932Z,1516710669.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:09.947Z,1516710669.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:10.333Z,1516710670.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:10.347Z,1516710670.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:10.735Z,1516710670.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:10.751Z,1516710670.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:11.139Z,1516710671.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:11.154Z,1516710671.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:11.543Z,1516710671.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:11.564Z,1516710671.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:11.937Z,1516710671.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:11.953Z,1516710671.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:12.340Z,1516710672.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:12.355Z,1516710672.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:12.743Z,1516710672.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:12.757Z,1516710672.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:13.140Z,1516710673.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:13.161Z,1516710673.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:13.542Z,1516710673.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:13.557Z,1516710673.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:13.934Z,1516710673.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:13.948Z,1516710673.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:14.332Z,1516710674.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:14.347Z,1516710674.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:14.742Z,1516710674.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:14.757Z,1516710674.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:15.142Z,1516710675.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:15.165Z,1516710675.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:15.542Z,1516710675.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:15.557Z,1516710675.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:15.933Z,1516710675.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:15.948Z,1516710675.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:16.333Z,1516710676.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:16.347Z,1516710676.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:16.742Z,1516710676.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:16.757Z,1516710676.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:17.141Z,1516710677.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:17.157Z,1516710677.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:17.542Z,1516710677.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:17.560Z,1516710677.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:17.928Z,1516710677.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:17.961Z,1516710677.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:18.336Z,1516710678.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:18.351Z,1516710678.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:18.744Z,1516710678.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:18.758Z,1516710678.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:19.146Z,1516710679.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:19.161Z,1516710679.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:19.543Z,1516710679.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:19.558Z,1516710679.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:19.934Z,1516710679.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:19.949Z,1516710679.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:20.336Z,1516710680.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:20.351Z,1516710680.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:20.743Z,1516710680.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:20.758Z,1516710680.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:21.147Z,1516710681.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:21.168Z,1516710681.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:21.546Z,1516710681.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:21.561Z,1516710681.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:21.933Z,1516710681.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:21.949Z,1516710681.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:22.342Z,1516710682.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:22.360Z,1516710682.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:22.746Z,1516710682.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:22.761Z,1516710682.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:23.145Z,1516710683.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:23.161Z,1516710683.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:23.544Z,1516710683.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:23.558Z,1516710683.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:23.932Z,1516710683.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:23.965Z,1516710683.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:24.324Z,1516710684.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:24.357Z,1516710684.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:24.744Z,1516710684.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:24.758Z,1516710684.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:25.147Z,1516710685.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:25.162Z,1516710685.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:25.541Z,1516710685.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:25.561Z,1516710685.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:25.924Z,1516710685.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:25.959Z,1516710685.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:26.325Z,1516710686.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:26.353Z,1516710686.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:26.724Z,1516710686.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:26.759Z,1516710686.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:27.135Z,1516710687.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:27.169Z,1516710687.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:27.547Z,1516710687.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:27.563Z,1516710687.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:27.935Z,1516710687.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:27.972Z,1516710687.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:28.324Z,1516710688.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:28.363Z,1516710688.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:28.724Z,1516710688.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:28.761Z,1516710688.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:29.133Z,1516710689.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:29.164Z,1516710689.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:29.532Z,1516710689.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:29.577Z,1516710689.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:29.943Z,1516710689.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:29.970Z,1516710689.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:30.343Z,1516710690.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:30.370Z,1516710690.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:30.743Z,1516710690.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:30.770Z,1516710690.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:31.136Z,1516710691.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:31.157Z,1516710691.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:31.534Z,1516710691.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:31.549Z,1516710691.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:31.930Z,1516710691.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:31.944Z,1516710691.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:32.329Z,1516710692.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:32.356Z,1516710692.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:32.724Z,1516710692.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:32.754Z,1516710692.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:33.149Z,1516710693.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:33.164Z,1516710693.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:33.548Z,1516710693.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:33.563Z,1516710693.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:33.941Z,1516710693.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:33.962Z,1516710693.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:34.326Z,1516710694.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:34.361Z,1516710694.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:34.725Z,1516710694.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:34.763Z,1516710694.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:35.126Z,1516710695.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:35.158Z,1516710695.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:35.529Z,1516710695.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:35.558Z,1516710695.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:35.949Z,1516710695.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:35.965Z,1516710695.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:36.347Z,1516710696.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:36.368Z,1516710696.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:36.747Z,1516710696.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:36.768Z,1516710696.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:37.122Z,1516710697.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:37.146Z,1516710697.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:37.524Z,1516710697.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:37.551Z,1516710697.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:37.924Z,1516710697.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:37.972Z,1516710697.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:38.323Z,1516710698.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:38.338Z,1516710698.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:38.724Z,1516710698.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:38.739Z,1516710698.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:39.147Z,1516710699.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:39.175Z,1516710699.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:39.547Z,1516710699.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:39.576Z,1516710699.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:39.947Z,1516710699.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:39.974Z,1516710699.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:40.336Z,1516710700.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:40.379Z,1516710700.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:40.725Z,1516710700.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:40.741Z,1516710700.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:41.130Z,1516710701.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:41.145Z,1516710701.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:41.536Z,1516710701.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:41.551Z,1516710701.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:41.940Z,1516710701.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:41.955Z,1516710701.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:42.340Z,1516710702.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:42.355Z,1516710702.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:42.740Z,1516710702.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:42.755Z,1516710702.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:43.130Z,1516710703.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:43.153Z,1516710703.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:43.534Z,1516710703.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:43.549Z,1516710703.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:43.934Z,1516710703.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:43.949Z,1516710703.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:44.329Z,1516710704.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:44.359Z,1516710704.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:44.732Z,1516710704.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:44.748Z,1516710704.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:45.143Z,1516710705.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:45.164Z,1516710705.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:45.544Z,1516710705.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:45.559Z,1516710705.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:45.942Z,1516710705.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:45.958Z,1516710705.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:46.337Z,1516710706.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:46.357Z,1516710706.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:46.736Z,1516710706.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:46.757Z,1516710706.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:47.137Z,1516710707.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:47.152Z,1516710707.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:47.537Z,1516710707.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:47.552Z,1516710707.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:47.942Z,1516710707.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:47.957Z,1516710707.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:48.341Z,1516710708.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:48.356Z,1516710708.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:48.743Z,1516710708.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:48.757Z,1516710708.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:49.128Z,1516710709.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:49.153Z,1516710709.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:49.532Z,1516710709.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:49.547Z,1516710709.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:49.933Z,1516710709.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:49.948Z,1516710709.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:50.329Z,1516710710.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:50.356Z,1516710710.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:50.736Z,1516710710.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:50.752Z,1516710710.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:51.144Z,1516710711.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:51.158Z,1516710711.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:51.545Z,1516710711.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:51.565Z,1516710711.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:51.942Z,1516710711.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:51.958Z,1516710711.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:52.334Z,1516710712.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:52.356Z,1516710712.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:52.728Z,1516710712.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:52.769Z,1516710712.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:53.136Z,1516710713.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:53.151Z,1516710713.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:53.525Z,1516710713.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:53.559Z,1516710713.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:53.947Z,1516710713.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:53.962Z,1516710713.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:54.347Z,1516710714.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:54.362Z,1516710714.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:54.741Z,1516710714.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:54.767Z,1516710714.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:55.124Z,1516710715.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:55.161Z,1516710715.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:55.528Z,1516710715.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:55.554Z,1516710715.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:55.925Z,1516710715.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:55.957Z,1516710715.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:56.323Z,1516710716.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:56.361Z,1516710716.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:56.729Z,1516710716.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:56.754Z,1516710716.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:57.145Z,1516710717.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:57.159Z,1516710717.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:57.545Z,1516710717.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:57.566Z,1516710717.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:57.944Z,1516710717.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:57.959Z,1516710717.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:31:58.325Z,1516710718.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:31:58.357Z,1516710718.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:01.423Z,1516710721.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:01.454Z,1516710721.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:01.548Z,1516710721.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:01.584Z,1516710721.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:01.931Z,1516710721.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:01.956Z,1516710721.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:02.346Z,1516710722.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:02.361Z,1516710722.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:02.731Z,1516710722.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:02.755Z,1516710722.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:03.124Z,1516710723.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:03.158Z,1516710723.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:03.524Z,1516710723.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:03.564Z,1516710723.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:03.924Z,1516710723.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:03.958Z,1516710723.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:04.325Z,1516710724.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:04.356Z,1516710724.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:04.717Z,1516710724.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:04.732Z,1516710724.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:05.131Z,1516710725.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:05.167Z,1516710725.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:05.535Z,1516710725.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:05.566Z,1516710725.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:05.935Z,1516710725.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:05.962Z,1516710725.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:06.324Z,1516710726.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:06.340Z,1516710726.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:06.720Z,1516710726.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:06.735Z,1516710726.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:07.122Z,1516710727.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:07.136Z,1516710727.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:07.526Z,1516710727.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:07.541Z,1516710727.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:07.926Z,1516710727.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:07.949Z,1516710727.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:08.331Z,1516710728.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:08.346Z,1516710728.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:08.726Z,1516710728.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:08.741Z,1516710728.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:09.121Z,1516710729.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:09.143Z,1516710729.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:09.517Z,1516710729.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:09.552Z,1516710729.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:09.914Z,1516710729.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:09.946Z,1516710729.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:10.313Z,1516710730.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:10.345Z,1516710730.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:10.712Z,1516710730.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:10.752Z,1516710730.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:11.139Z,1516710731.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:11.154Z,1516710731.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:11.532Z,1516710731.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:11.563Z,1516710731.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:11.935Z,1516710731.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:11.950Z,1516710731.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:12.314Z,1516710732.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:12.337Z,1516710732.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:12.714Z,1516710732.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:12.749Z,1516710732.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:13.114Z,1516710733.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:13.155Z,1516710733.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:13.510Z,1516710733.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:13.535Z,1516710733.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:13.925Z,1516710733.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:13.951Z,1516710733.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:14.328Z,1516710734.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:14.363Z,1516710734.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:14.747Z,1516710734.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:14.767Z,1516710734.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:15.112Z,1516710735.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:15.153Z,1516710735.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:15.516Z,1516710735.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:15.532Z,1516710735.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:15.914Z,1516710735.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:15.929Z,1516710735.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:16.325Z,1516710736.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:16.341Z,1516710736.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:16.720Z,1516710736.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:16.735Z,1516710736.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:17.131Z,1516710737.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:17.159Z,1516710737.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:17.535Z,1516710737.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:17.550Z,1516710737.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:17.927Z,1516710737.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:17.942Z,1516710737.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:18.317Z,1516710738.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:18.337Z,1516710738.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:18.721Z,1516710738.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:18.741Z,1516710738.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:19.122Z,1516710739.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:19.137Z,1516710739.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:19.521Z,1516710739.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:19.536Z,1516710739.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:19.926Z,1516710739.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:19.941Z,1516710739.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:20.327Z,1516710740.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:20.342Z,1516710740.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:20.726Z,1516710740.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:20.741Z,1516710740.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:21.117Z,1516710741.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:21.148Z,1516710741.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:21.522Z,1516710741.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:21.537Z,1516710741.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:21.921Z,1516710741.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:21.936Z,1516710741.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:22.313Z,1516710742.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:22.342Z,1516710742.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:22.712Z,1516710742.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:22.728Z,1516710742.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:23.124Z,1516710743.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:23.159Z,1516710743.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:23.536Z,1516710743.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:23.563Z,1516710743.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:23.927Z,1516710743.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:23.963Z,1516710743.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:24.314Z,1516710744.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:24.329Z,1516710744.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:24.717Z,1516710744.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:24.732Z,1516710744.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:25.117Z,1516710745.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:25.132Z,1516710745.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:25.517Z,1516710745.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:25.537Z,1516710745.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:25.927Z,1516710745.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:25.942Z,1516710745.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:26.327Z,1516710746.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:26.342Z,1516710746.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:26.724Z,1516710746.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:26.739Z,1516710746.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:27.120Z,1516710747.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:27.134Z,1516710747.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:27.520Z,1516710747.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:27.540Z,1516710747.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:27.918Z,1516710747.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:27.941Z,1516710747.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:28.324Z,1516710748.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:28.345Z,1516710748.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:28.725Z,1516710748.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:28.740Z,1516710748.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:29.125Z,1516710749.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:29.145Z,1516710749.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:29.527Z,1516710749.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:29.542Z,1516710749.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:29.926Z,1516710749.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:29.941Z,1516710749.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:30.316Z,1516710750.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:30.336Z,1516710750.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:30.716Z,1516710750.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:30.745Z,1516710750.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:31.122Z,1516710751.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:31.137Z,1516710751.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:31.520Z,1516710751.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:31.535Z,1516710751.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:31.925Z,1516710751.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:31.945Z,1516710751.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:32.326Z,1516710752.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:32.341Z,1516710752.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:32.726Z,1516710752.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:32.745Z,1516710752.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:33.120Z,1516710753.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:33.135Z,1516710753.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:33.521Z,1516710753.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:33.540Z,1516710753.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:33.920Z,1516710753.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:33.935Z,1516710753.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:34.316Z,1516710754.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:34.349Z,1516710754.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:34.725Z,1516710754.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:34.740Z,1516710754.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:35.127Z,1516710755.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:35.155Z,1516710755.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:35.534Z,1516710755.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:35.553Z,1516710755.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:35.932Z,1516710755.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:35.946Z,1516710755.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:36.310Z,1516710756.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:36.342Z,1516710756.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:36.724Z,1516710756.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:36.742Z,1516710756.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:37.113Z,1516710757.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:37.146Z,1516710757.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:37.510Z,1516710757.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:37.545Z,1516710757.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:37.935Z,1516710757.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:37.950Z,1516710757.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:38.336Z,1516710758.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:38.350Z,1516710758.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:38.735Z,1516710758.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:38.750Z,1516710758.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:39.112Z,1516710759.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:39.149Z,1516710759.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:39.512Z,1516710759.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:39.548Z,1516710759.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:39.910Z,1516710759.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:39.933Z,1516710759.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:40.313Z,1516710760.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:40.344Z,1516710760.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:40.711Z,1516710760.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:40.726Z,1516710760.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:41.123Z,1516710761.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:41.166Z,1516710761.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:41.535Z,1516710761.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:41.565Z,1516710761.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:41.567Z,1516710761.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:41.567Z,1516710761.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185 2018-01-23T12:32:41.567Z,1516710761.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:32:41.579Z,1516710761.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:32:41.935Z,1516710761.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:41.961Z,1516710761.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:41.973Z,1516710761.973 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:32:41.973Z,1516710761.973 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185 2018-01-23T12:32:42.313Z,1516710762.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:42.329Z,1516710762.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:42.329Z,1516710762.329 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185 2018-01-23T12:32:42.329Z,1516710762.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:32:42.331Z,1516710762.331 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:42.332Z,1516710762.332 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 185 2018-01-23T12:32:42.332Z,1516710762.332 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:32:42.332Z,1516710762.332 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:32:42.333Z,1516710762.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:32:42.333Z,1516710762.333 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:32:42.365Z,1516710762.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:32:42.365Z,1516710762.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:32:42.724Z,1516710762.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:42.784Z,1516710762.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:32:42.784Z,1516710762.784 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185 2018-01-23T12:32:42.784Z,1516710762.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:32:42.784Z,1516710762.784 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 185 2018-01-23T12:32:43.122Z,1516710763.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:43.143Z,1516710763.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:32:43.143Z,1516710763.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:32:43.144Z,1516710763.144 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:32:43.144Z,1516710763.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:32:43.144Z,1516710763.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:32:43.145Z,1516710763.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:32:43.516Z,1516710763.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:43.536Z,1516710763.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:32:43.537Z,1516710763.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:43.928Z,1516710763.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:43.955Z,1516710763.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:32:43.956Z,1516710763.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:44.334Z,1516710764.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:44.348Z,1516710764.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:32:44.349Z,1516710764.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:44.731Z,1516710764.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:44.745Z,1516710764.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:32:44.746Z,1516710764.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:45.119Z,1516710765.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:45.134Z,1516710765.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:32:45.135Z,1516710765.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:45.522Z,1516710765.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:45.544Z,1516710765.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:32:45.545Z,1516710765.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:45.924Z,1516710765.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:45.944Z,1516710765.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:32:45.945Z,1516710765.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:46.317Z,1516710766.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:46.339Z,1516710766.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:32:46.340Z,1516710766.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:46.741Z,1516710766.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:46.781Z,1516710766.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T12:32:46.782Z,1516710766.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:47.130Z,1516710767.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:47.145Z,1516710767.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:32:47.146Z,1516710767.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:47.532Z,1516710767.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:47.555Z,1516710767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:32:47.556Z,1516710767.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:47.929Z,1516710767.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:47.955Z,1516710767.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:32:47.956Z,1516710767.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:48.310Z,1516710768.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:48.347Z,1516710768.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:32:48.348Z,1516710768.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:48.712Z,1516710768.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:48.749Z,1516710768.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:32:48.750Z,1516710768.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:49.113Z,1516710769.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:49.146Z,1516710769.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:32:49.147Z,1516710769.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:49.512Z,1516710769.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:49.548Z,1516710769.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:32:49.549Z,1516710769.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:49.932Z,1516710769.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:49.947Z,1516710769.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:32:49.948Z,1516710769.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:50.342Z,1516710770.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:50.356Z,1516710770.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:32:50.357Z,1516710770.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:50.740Z,1516710770.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:50.760Z,1516710770.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:32:50.761Z,1516710770.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:51.114Z,1516710771.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:51.141Z,1516710771.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:32:51.141Z,1516710771.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:51.513Z,1516710771.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:51.541Z,1516710771.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:32:51.542Z,1516710771.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:51.912Z,1516710771.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:51.943Z,1516710771.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:32:51.944Z,1516710771.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:52.314Z,1516710772.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:52.349Z,1516710772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:32:52.350Z,1516710772.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:52.713Z,1516710772.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:52.750Z,1516710772.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:32:52.751Z,1516710772.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:53.128Z,1516710773.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:53.159Z,1516710773.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:32:53.160Z,1516710773.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:53.541Z,1516710773.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:53.556Z,1516710773.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:32:53.557Z,1516710773.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:53.922Z,1516710773.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:53.959Z,1516710773.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:32:53.960Z,1516710773.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:54.310Z,1516710774.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:54.325Z,1516710774.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:32:54.326Z,1516710774.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:54.712Z,1516710774.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:54.733Z,1516710774.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:32:54.734Z,1516710774.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:55.121Z,1516710775.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:55.136Z,1516710775.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:32:55.137Z,1516710775.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:55.512Z,1516710775.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:55.526Z,1516710775.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:32:55.528Z,1516710775.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:55.935Z,1516710775.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:55.961Z,1516710775.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:32:55.962Z,1516710775.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:56.339Z,1516710776.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:56.366Z,1516710776.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:32:56.367Z,1516710776.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:56.731Z,1516710776.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:56.762Z,1516710776.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:32:56.767Z,1516710776.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:57.121Z,1516710777.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:57.136Z,1516710777.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:32:57.137Z,1516710777.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:57.521Z,1516710777.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:57.540Z,1516710777.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:32:57.541Z,1516710777.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:57.928Z,1516710777.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:57.942Z,1516710777.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:32:57.943Z,1516710777.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:58.339Z,1516710778.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:58.370Z,1516710778.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:32:58.372Z,1516710778.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:32:58.727Z,1516710778.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:32:58.748Z,1516710778.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:32:58.749Z,1516710778.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:01.816Z,1516710781.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:01.831Z,1516710781.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T12:33:01.832Z,1516710781.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:01.938Z,1516710781.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:01.972Z,1516710781.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:33:01.973Z,1516710781.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:02.296Z,1516710782.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:02.319Z,1516710782.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:33:02.320Z,1516710782.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:02.699Z,1516710782.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:02.725Z,1516710782.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:03.084Z,1516710783.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:03.099Z,1516710783.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:03.478Z,1516710783.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:03.497Z,1516710783.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:03.880Z,1516710783.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:03.895Z,1516710783.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:04.285Z,1516710784.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:04.301Z,1516710784.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:04.678Z,1516710784.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:04.705Z,1516710784.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:05.090Z,1516710785.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:05.105Z,1516710785.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:05.488Z,1516710785.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:05.508Z,1516710785.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:05.888Z,1516710785.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:05.917Z,1516710785.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:06.285Z,1516710786.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:06.300Z,1516710786.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:06.684Z,1516710786.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:06.699Z,1516710786.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:07.075Z,1516710787.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:07.098Z,1516710787.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:07.481Z,1516710787.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:07.497Z,1516710787.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:07.876Z,1516710787.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:07.899Z,1516710787.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:08.291Z,1516710788.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:08.306Z,1516710788.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:08.694Z,1516710788.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:08.709Z,1516710788.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:09.091Z,1516710789.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:09.106Z,1516710789.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:09.476Z,1516710789.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:09.499Z,1516710789.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:09.879Z,1516710789.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:09.901Z,1516710789.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:10.280Z,1516710790.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:10.300Z,1516710790.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:10.679Z,1516710790.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:10.699Z,1516710790.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:11.092Z,1516710791.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:11.107Z,1516710791.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:11.490Z,1516710791.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:11.506Z,1516710791.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:11.891Z,1516710791.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:11.906Z,1516710791.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:12.282Z,1516710792.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:12.304Z,1516710792.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:12.670Z,1516710792.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:12.697Z,1516710792.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:13.076Z,1516710793.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:13.108Z,1516710793.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:13.490Z,1516710793.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:13.505Z,1516710793.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:13.885Z,1516710793.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:13.900Z,1516710793.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:14.291Z,1516710794.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:14.306Z,1516710794.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:14.695Z,1516710794.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:14.710Z,1516710794.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:15.091Z,1516710795.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:15.106Z,1516710795.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:15.476Z,1516710795.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:15.499Z,1516710795.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:15.882Z,1516710795.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:15.897Z,1516710795.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:16.277Z,1516710796.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:16.300Z,1516710796.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:16.676Z,1516710796.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:16.699Z,1516710796.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:17.092Z,1516710797.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:17.107Z,1516710797.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:17.490Z,1516710797.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:17.506Z,1516710797.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:17.891Z,1516710797.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:17.906Z,1516710797.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:18.282Z,1516710798.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:18.304Z,1516710798.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:18.684Z,1516710798.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:18.705Z,1516710798.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:19.076Z,1516710799.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:19.099Z,1516710799.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:19.479Z,1516710799.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:19.508Z,1516710799.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:19.884Z,1516710799.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:19.905Z,1516710799.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:20.291Z,1516710800.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:20.306Z,1516710800.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:20.694Z,1516710800.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:20.709Z,1516710800.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:21.091Z,1516710801.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:21.106Z,1516710801.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:21.479Z,1516710801.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:21.499Z,1516710801.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:21.881Z,1516710801.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:21.900Z,1516710801.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:22.285Z,1516710802.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:22.301Z,1516710802.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:22.693Z,1516710802.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:22.708Z,1516710802.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:23.091Z,1516710803.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:23.106Z,1516710803.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:23.496Z,1516710803.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:23.511Z,1516710803.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:23.892Z,1516710803.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:23.906Z,1516710803.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:24.286Z,1516710804.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:24.301Z,1516710804.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:24.683Z,1516710804.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:24.698Z,1516710804.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:25.077Z,1516710805.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:25.100Z,1516710805.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:25.483Z,1516710805.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:25.498Z,1516710805.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:25.884Z,1516710805.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:25.911Z,1516710805.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:26.293Z,1516710806.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:26.313Z,1516710806.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:26.697Z,1516710806.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:26.712Z,1516710806.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:27.091Z,1516710807.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:27.111Z,1516710807.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:27.490Z,1516710807.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:27.505Z,1516710807.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:27.871Z,1516710807.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:27.908Z,1516710807.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:28.273Z,1516710808.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:28.302Z,1516710808.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:28.672Z,1516710808.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:28.710Z,1516710808.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:29.100Z,1516710809.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:29.115Z,1516710809.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:29.495Z,1516710809.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:29.511Z,1516710809.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:29.892Z,1516710809.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:29.907Z,1516710809.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:30.272Z,1516710810.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:30.309Z,1516710810.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:30.688Z,1516710810.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:30.709Z,1516710810.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:31.092Z,1516710811.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:31.113Z,1516710811.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:31.473Z,1516710811.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:31.501Z,1516710811.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:31.872Z,1516710811.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:31.905Z,1516710811.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:32.295Z,1516710812.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:32.310Z,1516710812.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:32.699Z,1516710812.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:32.714Z,1516710812.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:33.088Z,1516710813.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:33.115Z,1516710813.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:33.476Z,1516710813.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:33.503Z,1516710813.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:33.875Z,1516710813.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:33.909Z,1516710813.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:34.290Z,1516710814.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:34.305Z,1516710814.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:34.678Z,1516710814.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:34.709Z,1516710814.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:35.097Z,1516710815.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:35.112Z,1516710815.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:35.491Z,1516710815.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:35.527Z,1516710815.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:35.904Z,1516710815.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:35.919Z,1516710815.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:36.277Z,1516710816.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:36.311Z,1516710816.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:36.676Z,1516710816.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:36.712Z,1516710816.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:37.078Z,1516710817.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:37.117Z,1516710817.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:37.475Z,1516710817.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:37.510Z,1516710817.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:37.874Z,1516710817.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:37.889Z,1516710817.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:38.283Z,1516710818.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:38.310Z,1516710818.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:38.691Z,1516710818.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:38.717Z,1516710818.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:39.091Z,1516710819.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:39.115Z,1516710819.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:39.484Z,1516710819.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:39.520Z,1516710819.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:39.885Z,1516710819.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:39.921Z,1516710819.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:40.283Z,1516710820.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:40.298Z,1516710820.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:40.681Z,1516710820.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:40.701Z,1516710820.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:41.095Z,1516710821.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:41.130Z,1516710821.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:41.491Z,1516710821.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:41.506Z,1516710821.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:41.885Z,1516710821.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:41.900Z,1516710821.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:42.283Z,1516710822.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:42.298Z,1516710822.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:42.682Z,1516710822.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:42.701Z,1516710822.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:43.088Z,1516710823.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:43.109Z,1516710823.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:43.484Z,1516710823.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:43.499Z,1516710823.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:43.884Z,1516710823.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:43.899Z,1516710823.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:44.287Z,1516710824.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:44.302Z,1516710824.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:44.691Z,1516710824.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:44.706Z,1516710824.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:45.088Z,1516710825.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:45.103Z,1516710825.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:45.481Z,1516710825.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:45.509Z,1516710825.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:45.884Z,1516710825.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:45.899Z,1516710825.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:46.284Z,1516710826.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:46.303Z,1516710826.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:46.682Z,1516710826.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:46.698Z,1516710826.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:47.094Z,1516710827.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:47.109Z,1516710827.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:47.488Z,1516710827.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:47.515Z,1516710827.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:47.894Z,1516710827.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:47.913Z,1516710827.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:48.283Z,1516710828.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:48.304Z,1516710828.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:48.687Z,1516710828.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:48.702Z,1516710828.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:49.078Z,1516710829.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:49.109Z,1516710829.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:49.490Z,1516710829.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:49.505Z,1516710829.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:49.876Z,1516710829.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:49.908Z,1516710829.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:50.292Z,1516710830.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:50.312Z,1516710830.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:50.692Z,1516710830.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:50.711Z,1516710830.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:51.090Z,1516710831.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:51.113Z,1516710831.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:51.472Z,1516710831.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:51.520Z,1516710831.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:51.892Z,1516710831.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:51.900Z,1516710831.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x65387 got:0x51136 2018-01-23T12:33:51.924Z,1516710831.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:52.287Z,1516710832.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:52.302Z,1516710832.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:52.678Z,1516710832.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:52.713Z,1516710832.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:53.099Z,1516710833.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:53.114Z,1516710833.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:53.498Z,1516710833.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:53.521Z,1516710833.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:53.893Z,1516710833.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:53.908Z,1516710833.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:54.275Z,1516710834.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:54.312Z,1516710834.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:54.670Z,1516710834.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:54.700Z,1516710834.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:55.072Z,1516710835.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:55.109Z,1516710835.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:55.475Z,1516710835.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:55.508Z,1516710835.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:55.875Z,1516710835.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:55.890Z,1516710835.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:56.283Z,1516710836.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:56.321Z,1516710836.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:56.697Z,1516710836.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:56.716Z,1516710836.716 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T12:33:56.741Z,1516710836.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:57.089Z,1516710837.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:57.119Z,1516710837.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:57.486Z,1516710837.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:57.517Z,1516710837.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:57.878Z,1516710837.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:57.928Z,1516710837.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:57.931Z,1516710837.931 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:33:57.931Z,1516710837.931 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:33:57.931Z,1516710837.931 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:33:57.931Z,1516710837.931 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:33:58.286Z,1516710838.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:58.320Z,1516710838.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:58.323Z,1516710838.323 [Default:CheckIn:D] Stopped 2018-01-23T12:33:58.323Z,1516710838.323 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:33:58.679Z,1516710838.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:58.708Z,1516710838.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:33:58.715Z,1516710838.715 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 556.104362 min 2018-01-23T12:33:58.715Z,1516710838.715 [Default:CheckIn:E] Stopped 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn] Stopped 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn](INFO): Running loop #55 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn] Running Loop=55 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:33:58.716Z,1516710838.716 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:33:59.086Z,1516710839.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:33:59.109Z,1516710839.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:02.183Z,1516710842.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:02.199Z,1516710842.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:02.330Z,1516710842.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:02.345Z,1516710842.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:02.652Z,1516710842.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:02.689Z,1516710842.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:03.053Z,1516710843.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:03.094Z,1516710843.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:03.452Z,1516710843.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:03.468Z,1516710843.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:03.847Z,1516710843.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:03.870Z,1516710843.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:04.259Z,1516710844.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:04.274Z,1516710844.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:04.658Z,1516710844.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:04.673Z,1516710844.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:05.054Z,1516710845.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:05.078Z,1516710845.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:05.440Z,1516710845.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:05.469Z,1516710845.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:05.840Z,1516710845.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:05.873Z,1516710845.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:06.241Z,1516710846.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:06.277Z,1516710846.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:06.640Z,1516710846.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:06.677Z,1516710846.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:07.056Z,1516710847.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:07.085Z,1516710847.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:07.463Z,1516710847.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:07.479Z,1516710847.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:07.854Z,1516710847.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:07.887Z,1516710847.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:08.240Z,1516710848.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:08.266Z,1516710848.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:08.640Z,1516710848.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:08.673Z,1516710848.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:09.040Z,1516710849.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:09.077Z,1516710849.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:09.441Z,1516710849.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:09.468Z,1516710849.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:09.861Z,1516710849.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:09.881Z,1516710849.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:10.261Z,1516710850.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:10.276Z,1516710850.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:10.664Z,1516710850.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:10.678Z,1516710850.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:11.071Z,1516710851.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:11.086Z,1516710851.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:11.441Z,1516710851.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:11.474Z,1516710851.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:11.840Z,1516710851.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:11.877Z,1516710851.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:12.241Z,1516710852.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:12.277Z,1516710852.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:12.644Z,1516710852.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:12.679Z,1516710852.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:13.051Z,1516710853.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:13.089Z,1516710853.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:13.463Z,1516710853.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:13.479Z,1516710853.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:13.851Z,1516710853.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:13.889Z,1516710853.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:14.241Z,1516710854.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:14.269Z,1516710854.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:14.655Z,1516710854.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:14.860Z,1516710854.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:15.059Z,1516710855.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:15.081Z,1516710855.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:15.463Z,1516710855.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:15.478Z,1516710855.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:15.859Z,1516710855.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:15.874Z,1516710855.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:16.241Z,1516710856.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:16.269Z,1516710856.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:16.652Z,1516710856.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:16.670Z,1516710856.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:17.056Z,1516710857.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:17.083Z,1516710857.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:17.468Z,1516710857.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:17.483Z,1516710857.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:17.860Z,1516710857.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:17.874Z,1516710857.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:18.241Z,1516710858.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:18.277Z,1516710858.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:18.644Z,1516710858.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:18.672Z,1516710858.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:19.059Z,1516710859.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:19.075Z,1516710859.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:19.462Z,1516710859.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:19.477Z,1516710859.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:19.860Z,1516710859.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:19.880Z,1516710859.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:20.245Z,1516710860.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:20.271Z,1516710860.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:20.644Z,1516710860.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:20.673Z,1516710860.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:21.055Z,1516710861.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:21.082Z,1516710861.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:21.460Z,1516710861.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:21.485Z,1516710861.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:21.856Z,1516710861.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:21.879Z,1516710861.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:22.245Z,1516710862.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:22.272Z,1516710862.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:22.640Z,1516710862.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:22.759Z,1516710862.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:23.059Z,1516710863.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:23.074Z,1516710863.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:23.463Z,1516710863.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:23.481Z,1516710863.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:23.859Z,1516710863.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:23.874Z,1516710863.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:24.241Z,1516710864.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:24.273Z,1516710864.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:24.641Z,1516710864.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:24.674Z,1516710864.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:25.058Z,1516710865.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:25.080Z,1516710865.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:25.463Z,1516710865.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:25.478Z,1516710865.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:25.859Z,1516710865.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:25.880Z,1516710865.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:26.241Z,1516710866.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:26.273Z,1516710866.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:26.640Z,1516710866.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:26.673Z,1516710866.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:27.058Z,1516710867.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:27.081Z,1516710867.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:27.463Z,1516710867.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:27.478Z,1516710867.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:27.856Z,1516710867.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:27.887Z,1516710867.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:28.241Z,1516710868.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:28.269Z,1516710868.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:28.640Z,1516710868.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:28.672Z,1516710868.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:29.059Z,1516710869.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:29.074Z,1516710869.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:29.087Z,1516710869.087 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:34:29.474Z,1516710869.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:29.489Z,1516710869.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:29.860Z,1516710869.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:29.874Z,1516710869.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:30.241Z,1516710870.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:30.272Z,1516710870.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:30.644Z,1516710870.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:30.679Z,1516710870.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:31.051Z,1516710871.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:31.085Z,1516710871.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:31.463Z,1516710871.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:31.479Z,1516710871.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:31.851Z,1516710871.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:31.885Z,1516710871.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:32.245Z,1516710872.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:32.277Z,1516710872.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:32.644Z,1516710872.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:32.681Z,1516710872.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:33.059Z,1516710873.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:33.088Z,1516710873.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:33.459Z,1516710873.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:33.485Z,1516710873.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:33.863Z,1516710873.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:33.889Z,1516710873.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:34.253Z,1516710874.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:34.285Z,1516710874.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:34.648Z,1516710874.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:34.669Z,1516710874.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:35.055Z,1516710875.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:35.070Z,1516710875.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:35.463Z,1516710875.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:35.499Z,1516710875.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:35.851Z,1516710875.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:35.867Z,1516710875.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:36.246Z,1516710876.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:36.271Z,1516710876.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:36.646Z,1516710876.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:36.670Z,1516710876.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:37.051Z,1516710877.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:37.067Z,1516710877.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:37.463Z,1516710877.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:37.478Z,1516710877.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:37.856Z,1516710877.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:37.871Z,1516710877.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:38.248Z,1516710878.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:38.275Z,1516710878.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:38.644Z,1516710878.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:38.671Z,1516710878.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:39.064Z,1516710879.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:39.085Z,1516710879.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:39.463Z,1516710879.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:39.478Z,1516710879.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:39.860Z,1516710879.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:39.876Z,1516710879.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:40.245Z,1516710880.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:40.283Z,1516710880.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:40.644Z,1516710880.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:40.669Z,1516710880.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:41.058Z,1516710881.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:41.089Z,1516710881.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:41.467Z,1516710881.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:41.489Z,1516710881.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:41.864Z,1516710881.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:41.879Z,1516710881.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:42.242Z,1516710882.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:42.274Z,1516710882.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:42.641Z,1516710882.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:42.677Z,1516710882.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:43.064Z,1516710883.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:43.079Z,1516710883.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:43.459Z,1516710883.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:43.493Z,1516710883.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:43.852Z,1516710883.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:43.887Z,1516710883.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:44.241Z,1516710884.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:44.257Z,1516710884.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:44.640Z,1516710884.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:44.658Z,1516710884.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:45.056Z,1516710885.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:45.091Z,1516710885.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:45.464Z,1516710885.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:45.486Z,1516710885.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:45.855Z,1516710885.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:45.883Z,1516710885.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:46.253Z,1516710886.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:46.268Z,1516710886.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:46.650Z,1516710886.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:46.669Z,1516710886.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:47.052Z,1516710887.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:47.067Z,1516710887.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:47.456Z,1516710887.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:47.476Z,1516710887.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:47.854Z,1516710887.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:47.869Z,1516710887.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:48.248Z,1516710888.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:48.272Z,1516710888.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:48.649Z,1516710888.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:48.664Z,1516710888.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:49.057Z,1516710889.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:49.077Z,1516710889.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:49.457Z,1516710889.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:49.473Z,1516710889.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:49.858Z,1516710889.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:49.874Z,1516710889.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:50.248Z,1516710890.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:50.263Z,1516710890.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:50.645Z,1516710890.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:50.678Z,1516710890.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:51.040Z,1516710891.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:51.069Z,1516710891.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:51.460Z,1516710891.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:51.474Z,1516710891.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:51.860Z,1516710891.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:51.883Z,1516710891.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:52.264Z,1516710892.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:52.279Z,1516710892.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:52.644Z,1516710892.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:52.670Z,1516710892.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:53.040Z,1516710893.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:53.073Z,1516710893.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:53.441Z,1516710893.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:53.478Z,1516710893.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:53.840Z,1516710893.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:53.873Z,1516710893.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:54.255Z,1516710894.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:54.277Z,1516710894.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:54.663Z,1516710894.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:54.678Z,1516710894.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:55.059Z,1516710895.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:55.074Z,1516710895.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:55.440Z,1516710895.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:55.473Z,1516710895.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:55.840Z,1516710895.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:55.877Z,1516710895.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:56.244Z,1516710896.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:56.270Z,1516710896.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:56.641Z,1516710896.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:56.673Z,1516710896.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:57.040Z,1516710897.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:57.078Z,1516710897.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:57.464Z,1516710897.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:57.479Z,1516710897.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:57.861Z,1516710897.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:57.888Z,1516710897.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:58.254Z,1516710898.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:58.280Z,1516710898.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:58.644Z,1516710898.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:58.676Z,1516710898.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:59.041Z,1516710899.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:59.068Z,1516710899.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:34:59.442Z,1516710899.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:34:59.457Z,1516710899.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:02.549Z,1516710902.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:02.581Z,1516710902.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:02.692Z,1516710902.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:02.729Z,1516710902.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:03.039Z,1516710903.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:03.054Z,1516710903.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:03.447Z,1516710903.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:03.482Z,1516710903.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:03.834Z,1516710903.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:03.849Z,1516710903.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:04.229Z,1516710904.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:04.248Z,1516710904.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:04.629Z,1516710904.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:04.652Z,1516710904.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:05.028Z,1516710905.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:05.048Z,1516710905.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:05.438Z,1516710905.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:05.465Z,1516710905.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:05.847Z,1516710905.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:05.862Z,1516710905.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:06.243Z,1516710906.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:06.258Z,1516710906.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:06.640Z,1516710906.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:06.661Z,1516710906.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:07.034Z,1516710907.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:07.049Z,1516710907.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:07.429Z,1516710907.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:07.452Z,1516710907.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:07.840Z,1516710907.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:07.861Z,1516710907.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:08.247Z,1516710908.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:08.262Z,1516710908.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:08.644Z,1516710908.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:08.663Z,1516710908.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:09.043Z,1516710909.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:09.058Z,1516710909.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:09.434Z,1516710909.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:09.449Z,1516710909.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:09.828Z,1516710909.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:09.860Z,1516710909.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:10.232Z,1516710910.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:10.253Z,1516710910.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:10.629Z,1516710910.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:10.661Z,1516710910.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:11.037Z,1516710911.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:11.057Z,1516710911.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:11.443Z,1516710911.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:11.458Z,1516710911.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:11.848Z,1516710911.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:11.863Z,1516710911.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:12.240Z,1516710912.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:12.261Z,1516710912.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:12.625Z,1516710912.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:12.661Z,1516710912.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:13.029Z,1516710913.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:13.057Z,1516710913.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:13.425Z,1516710913.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:13.457Z,1516710913.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:13.824Z,1516710913.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:13.861Z,1516710913.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:14.243Z,1516710914.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:14.264Z,1516710914.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:14.645Z,1516710914.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:14.666Z,1516710914.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:15.052Z,1516710915.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:15.067Z,1516710915.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:15.425Z,1516710915.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:15.457Z,1516710915.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:15.829Z,1516710915.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:15.865Z,1516710915.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:16.225Z,1516710916.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:16.261Z,1516710916.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:16.634Z,1516710916.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:16.663Z,1516710916.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:17.025Z,1516710917.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:17.061Z,1516710917.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:17.440Z,1516710917.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:17.466Z,1516710917.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:17.840Z,1516710917.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:17.879Z,1516710917.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:18.235Z,1516710918.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:18.269Z,1516710918.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:18.625Z,1516710918.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:18.661Z,1516710918.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:19.029Z,1516710919.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:19.044Z,1516710919.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:19.433Z,1516710919.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:19.456Z,1516710919.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:19.839Z,1516710919.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:19.854Z,1516710919.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:20.242Z,1516710920.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:20.266Z,1516710920.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:20.650Z,1516710920.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:20.673Z,1516710920.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:21.046Z,1516710921.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:21.061Z,1516710921.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:21.425Z,1516710921.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:21.453Z,1516710921.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:21.825Z,1516710921.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:21.857Z,1516710921.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:22.224Z,1516710922.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:22.261Z,1516710922.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:22.629Z,1516710922.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:22.660Z,1516710922.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:23.025Z,1516710923.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:23.061Z,1516710923.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:23.439Z,1516710923.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:23.468Z,1516710923.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:23.839Z,1516710923.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:23.875Z,1516710923.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:24.235Z,1516710924.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:24.262Z,1516710924.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:24.633Z,1516710924.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:24.676Z,1516710924.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:25.033Z,1516710925.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:25.048Z,1516710925.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:25.435Z,1516710925.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:25.450Z,1516710925.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:25.833Z,1516710925.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:25.853Z,1516710925.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:26.236Z,1516710926.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:26.251Z,1516710926.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:26.648Z,1516710926.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:26.683Z,1516710926.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:27.040Z,1516710927.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:27.056Z,1516710927.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:27.433Z,1516710927.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:27.449Z,1516710927.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:27.836Z,1516710927.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:27.854Z,1516710927.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:28.232Z,1516710928.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:28.253Z,1516710928.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:28.634Z,1516710928.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:28.649Z,1516710928.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:29.029Z,1516710929.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:29.052Z,1516710929.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:29.443Z,1516710929.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:29.458Z,1516710929.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:29.846Z,1516710929.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:29.861Z,1516710929.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:30.243Z,1516710930.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:30.257Z,1516710930.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:30.629Z,1516710930.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:30.692Z,1516710930.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:31.033Z,1516710931.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:31.048Z,1516710931.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:31.432Z,1516710931.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:31.459Z,1516710931.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:31.837Z,1516710931.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:31.852Z,1516710931.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:32.244Z,1516710932.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:32.259Z,1516710932.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:32.647Z,1516710932.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:32.662Z,1516710932.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:33.040Z,1516710933.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:33.067Z,1516710933.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:33.425Z,1516710933.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:33.453Z,1516710933.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:33.829Z,1516710933.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:33.855Z,1516710933.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:34.225Z,1516710934.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:34.251Z,1516710934.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:34.625Z,1516710934.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:34.664Z,1516710934.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:35.025Z,1516710935.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:35.050Z,1516710935.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:35.440Z,1516710935.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:35.470Z,1516710935.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:35.854Z,1516710935.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:35.869Z,1516710935.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:36.247Z,1516710936.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:36.262Z,1516710936.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:36.625Z,1516710936.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:36.651Z,1516710936.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:37.024Z,1516710937.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:37.058Z,1516710937.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:37.429Z,1516710937.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:37.456Z,1516710937.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:37.825Z,1516710937.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:37.860Z,1516710937.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:38.242Z,1516710938.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:38.266Z,1516710938.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:38.651Z,1516710938.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:38.666Z,1516710938.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:39.040Z,1516710939.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:39.061Z,1516710939.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:39.424Z,1516710939.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:39.453Z,1516710939.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:39.825Z,1516710939.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:39.851Z,1516710939.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:40.224Z,1516710940.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:40.250Z,1516710940.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:40.625Z,1516710940.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:40.664Z,1516710940.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:41.029Z,1516710941.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:41.054Z,1516710941.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:41.443Z,1516710941.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:41.458Z,1516710941.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:41.847Z,1516710941.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:41.868Z,1516710941.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:42.243Z,1516710942.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:42.258Z,1516710942.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:42.625Z,1516710942.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:42.650Z,1516710942.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:42.653Z,1516710942.653 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:42.653Z,1516710942.653 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186 2018-01-23T12:35:42.653Z,1516710942.653 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:35:42.665Z,1516710942.665 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:35:43.024Z,1516710943.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:43.057Z,1516710943.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:43.070Z,1516710943.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:35:43.070Z,1516710943.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186 2018-01-23T12:35:43.429Z,1516710943.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:43.456Z,1516710943.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:43.456Z,1516710943.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186 2018-01-23T12:35:43.456Z,1516710943.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:35:43.458Z,1516710943.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:43.458Z,1516710943.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 186 2018-01-23T12:35:43.458Z,1516710943.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:35:43.459Z,1516710943.459 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:35:43.459Z,1516710943.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:35:43.460Z,1516710943.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:35:43.471Z,1516710943.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:35:43.471Z,1516710943.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:35:43.828Z,1516710943.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:43.865Z,1516710943.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:35:43.865Z,1516710943.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186 2018-01-23T12:35:43.866Z,1516710943.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:35:43.866Z,1516710943.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 186 2018-01-23T12:35:44.239Z,1516710944.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:44.261Z,1516710944.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:35:44.262Z,1516710944.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:35:44.262Z,1516710944.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:35:44.263Z,1516710944.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:35:44.263Z,1516710944.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:35:44.263Z,1516710944.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:35:44.643Z,1516710944.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:44.672Z,1516710944.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:35:44.673Z,1516710944.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:45.035Z,1516710945.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:45.069Z,1516710945.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:35:45.069Z,1516710945.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:45.425Z,1516710945.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:45.461Z,1516710945.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:35:45.462Z,1516710945.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:45.829Z,1516710945.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:45.860Z,1516710945.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:35:45.861Z,1516710945.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:46.225Z,1516710946.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:46.247Z,1516710946.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:35:46.248Z,1516710946.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:46.625Z,1516710946.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:46.640Z,1516710946.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:35:46.641Z,1516710946.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:47.025Z,1516710947.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:47.044Z,1516710947.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:35:47.045Z,1516710947.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:47.444Z,1516710947.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:47.469Z,1516710947.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:35:47.470Z,1516710947.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:47.843Z,1516710947.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:47.870Z,1516710947.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:35:47.871Z,1516710947.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:48.243Z,1516710948.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:48.269Z,1516710948.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:35:48.270Z,1516710948.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:48.636Z,1516710948.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:48.679Z,1516710948.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:35:48.680Z,1516710948.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:49.029Z,1516710949.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:49.043Z,1516710949.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:35:49.044Z,1516710949.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:49.430Z,1516710949.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:49.445Z,1516710949.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:35:49.446Z,1516710949.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:49.830Z,1516710949.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:49.849Z,1516710949.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:35:49.849Z,1516710949.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:50.235Z,1516710950.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:50.250Z,1516710950.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:35:50.251Z,1516710950.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:50.647Z,1516710950.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:50.662Z,1516710950.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:35:50.679Z,1516710950.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:51.038Z,1516710951.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:51.053Z,1516710951.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:35:51.054Z,1516710951.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:51.434Z,1516710951.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:51.448Z,1516710951.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:35:51.449Z,1516710951.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:51.832Z,1516710951.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:51.847Z,1516710951.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:35:51.848Z,1516710951.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:52.233Z,1516710952.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:52.252Z,1516710952.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:35:52.253Z,1516710952.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:52.634Z,1516710952.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:52.649Z,1516710952.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:35:52.650Z,1516710952.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:53.038Z,1516710953.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:53.053Z,1516710953.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:35:53.054Z,1516710953.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:53.438Z,1516710953.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:53.453Z,1516710953.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:35:53.454Z,1516710953.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:53.839Z,1516710953.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:53.860Z,1516710953.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:35:53.861Z,1516710953.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:54.240Z,1516710954.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:54.260Z,1516710954.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:35:54.261Z,1516710954.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:54.633Z,1516710954.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:54.648Z,1516710954.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:35:54.649Z,1516710954.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:55.032Z,1516710955.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:55.058Z,1516710955.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:35:55.059Z,1516710955.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:55.432Z,1516710955.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:55.455Z,1516710955.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:35:55.456Z,1516710955.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:55.842Z,1516710955.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:55.856Z,1516710955.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:35:55.857Z,1516710955.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:56.246Z,1516710956.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:56.260Z,1516710956.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:35:56.261Z,1516710956.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:56.648Z,1516710956.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:56.675Z,1516710956.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:35:56.676Z,1516710956.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:57.040Z,1516710957.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:57.066Z,1516710957.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:35:57.067Z,1516710957.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:57.424Z,1516710957.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:57.469Z,1516710957.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:35:57.470Z,1516710957.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:57.828Z,1516710957.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:57.865Z,1516710957.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:35:57.866Z,1516710957.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:58.233Z,1516710958.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:58.265Z,1516710958.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:35:58.266Z,1516710958.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:58.626Z,1516710958.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:58.667Z,1516710958.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:35:58.668Z,1516710958.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:59.023Z,1516710959.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:59.038Z,1516710959.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:35:59.039Z,1516710959.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:59.436Z,1516710959.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:59.462Z,1516710959.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:35:59.467Z,1516710959.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:35:59.847Z,1516710959.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:35:59.876Z,1516710959.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:35:59.877Z,1516710959.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:03.584Z,1516710963.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:03.623Z,1516710963.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:03.726Z,1516710963.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:03.766Z,1516710963.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:04.102Z,1516710964.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:04.142Z,1516710964.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:04.524Z,1516710964.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:04.552Z,1516710964.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:04.914Z,1516710964.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:04.957Z,1516710964.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:05.320Z,1516710965.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:05.384Z,1516710965.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:05.724Z,1516710965.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:05.750Z,1516710965.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:06.120Z,1516710966.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:06.141Z,1516710966.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:06.509Z,1516710966.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:06.547Z,1516710966.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:06.901Z,1516710966.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:06.932Z,1516710966.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:07.300Z,1516710967.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:07.337Z,1516710967.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:07.706Z,1516710967.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:07.765Z,1516710967.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:08.105Z,1516710968.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:08.124Z,1516710968.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:08.517Z,1516710968.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:08.557Z,1516710968.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:08.925Z,1516710968.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:08.967Z,1516710968.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:09.316Z,1516710969.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:09.360Z,1516710969.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:09.714Z,1516710969.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:09.757Z,1516710969.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:10.113Z,1516710970.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:10.156Z,1516710970.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:10.510Z,1516710970.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:10.566Z,1516710970.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:10.909Z,1516710970.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:10.937Z,1516710970.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:11.325Z,1516710971.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:11.344Z,1516710971.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:11.717Z,1516710971.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:11.752Z,1516710971.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:12.122Z,1516710972.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:12.162Z,1516710972.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:12.541Z,1516710972.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:12.604Z,1516710972.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:12.909Z,1516710972.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:12.991Z,1516710972.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:13.311Z,1516710973.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:13.330Z,1516710973.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:13.713Z,1516710973.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:13.764Z,1516710973.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:14.113Z,1516710974.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:14.138Z,1516710974.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:14.534Z,1516710974.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:14.574Z,1516710974.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:14.926Z,1516710974.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:14.983Z,1516710974.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:15.325Z,1516710975.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:15.349Z,1516710975.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:15.735Z,1516710975.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:15.779Z,1516710975.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:16.105Z,1516710976.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:16.138Z,1516710976.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:16.506Z,1516710976.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:16.550Z,1516710976.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:16.904Z,1516710976.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:16.950Z,1516710976.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:17.339Z,1516710977.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:17.367Z,1516710977.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:17.720Z,1516710977.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:17.768Z,1516710977.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:18.129Z,1516710978.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:18.165Z,1516710978.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:18.527Z,1516710978.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:18.567Z,1516710978.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:18.911Z,1516710978.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:18.958Z,1516710978.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:19.318Z,1516710979.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:19.364Z,1516710979.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:19.720Z,1516710979.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:19.755Z,1516710979.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:20.114Z,1516710980.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:20.129Z,1516710980.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:20.519Z,1516710980.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:20.561Z,1516710980.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:20.930Z,1516710980.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:20.977Z,1516710980.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:21.316Z,1516710981.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:21.351Z,1516710981.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:21.707Z,1516710981.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:21.759Z,1516710981.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:22.102Z,1516710982.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:22.148Z,1516710982.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:22.516Z,1516710982.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:22.582Z,1516710982.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:22.933Z,1516710982.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:22.953Z,1516710982.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:23.309Z,1516710983.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:23.348Z,1516710983.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:23.711Z,1516710983.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:23.745Z,1516710983.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:24.117Z,1516710984.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:24.143Z,1516710984.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:24.511Z,1516710984.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:24.542Z,1516710984.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:24.906Z,1516710984.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:24.921Z,1516710984.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:25.305Z,1516710985.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:25.343Z,1516710985.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:25.703Z,1516710985.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:25.722Z,1516710985.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:26.105Z,1516710986.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:26.123Z,1516710986.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:26.480Z,1516710986.480 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:36:26.480Z,1516710986.480 [NAL9602] Data Fault, FailCount= 1 2018-01-23T12:36:26.480Z,1516710986.480 [NAL9602](ERROR): Data Fault 2018-01-23T12:36:26.511Z,1516710986.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:26.534Z,1516710986.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:26.556Z,1516710986.556 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:36:26.880Z,1516710986.880 [NAL9602](INFO): Powering down 2018-01-23T12:36:26.900Z,1516710986.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:26.937Z,1516710986.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:27.308Z,1516710987.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:27.328Z,1516710987.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:27.704Z,1516710987.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:27.723Z,1516710987.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:27.736Z,1516710987.736 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:36:27.736Z,1516710987.736 [NAL9602] No Fault, FailCount= 1 2018-01-23T12:36:28.105Z,1516710988.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:28.122Z,1516710988.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:28.504Z,1516710988.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:28.555Z,1516710988.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:28.902Z,1516710988.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:28.917Z,1516710988.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:29.304Z,1516710989.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:29.324Z,1516710989.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:29.708Z,1516710989.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:29.726Z,1516710989.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:30.105Z,1516710990.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:30.141Z,1516710990.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:30.494Z,1516710990.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:30.521Z,1516710990.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:30.913Z,1516710990.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:30.931Z,1516710990.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:31.308Z,1516710991.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:31.328Z,1516710991.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:31.709Z,1516710991.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:31.734Z,1516710991.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:32.105Z,1516710992.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:32.120Z,1516710992.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:32.505Z,1516710992.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:32.524Z,1516710992.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:32.893Z,1516710992.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:32.932Z,1516710992.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:33.296Z,1516710993.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:33.325Z,1516710993.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:33.696Z,1516710993.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:33.722Z,1516710993.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:34.093Z,1516710994.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:34.137Z,1516710994.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:34.509Z,1516710994.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:34.528Z,1516710994.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:34.896Z,1516710994.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:34.929Z,1516710994.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:35.293Z,1516710995.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:35.320Z,1516710995.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:35.696Z,1516710995.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:35.736Z,1516710995.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:36.096Z,1516710996.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:36.125Z,1516710996.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:36.493Z,1516710996.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:36.528Z,1516710996.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:36.896Z,1516710996.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:36.929Z,1516710996.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:37.308Z,1516710997.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:37.325Z,1516710997.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:37.696Z,1516710997.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:37.726Z,1516710997.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:38.096Z,1516710998.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:38.128Z,1516710998.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:38.508Z,1516710998.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:38.522Z,1516710998.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:38.896Z,1516710998.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:38.923Z,1516710998.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:39.296Z,1516710999.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:39.327Z,1516710999.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:39.696Z,1516710999.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:39.730Z,1516710999.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:40.093Z,1516711000.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:40.132Z,1516711000.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:40.508Z,1516711000.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:40.523Z,1516711000.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:40.895Z,1516711000.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:40.927Z,1516711000.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:41.293Z,1516711001.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:41.328Z,1516711001.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:41.696Z,1516711001.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:41.729Z,1516711001.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:42.096Z,1516711002.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:42.121Z,1516711002.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:42.496Z,1516711002.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:42.534Z,1516711002.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:42.908Z,1516711002.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:42.923Z,1516711002.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:43.308Z,1516711003.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:43.328Z,1516711003.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:43.708Z,1516711003.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:43.723Z,1516711003.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:44.096Z,1516711004.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:44.142Z,1516711004.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:44.496Z,1516711004.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:44.521Z,1516711004.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:44.893Z,1516711004.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:44.928Z,1516711004.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:45.296Z,1516711005.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:45.333Z,1516711005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:45.700Z,1516711005.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:45.727Z,1516711005.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:46.096Z,1516711006.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:46.122Z,1516711006.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:46.500Z,1516711006.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:46.527Z,1516711006.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:46.896Z,1516711006.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:46.921Z,1516711006.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:47.296Z,1516711007.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:47.325Z,1516711007.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:47.704Z,1516711007.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:47.719Z,1516711007.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:48.105Z,1516711008.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:48.129Z,1516711008.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:48.501Z,1516711008.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:48.516Z,1516711008.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:48.900Z,1516711008.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:48.939Z,1516711008.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:49.304Z,1516711009.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:49.318Z,1516711009.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:49.704Z,1516711009.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:49.718Z,1516711009.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:50.100Z,1516711010.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:50.121Z,1516711010.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:50.503Z,1516711010.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:50.518Z,1516711010.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:50.901Z,1516711010.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:50.916Z,1516711010.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:51.300Z,1516711011.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:51.322Z,1516711011.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:51.704Z,1516711011.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:51.718Z,1516711011.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:52.101Z,1516711012.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:52.116Z,1516711012.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:52.500Z,1516711012.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:52.521Z,1516711012.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:52.899Z,1516711012.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:52.922Z,1516711012.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:53.304Z,1516711013.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:53.318Z,1516711013.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:53.700Z,1516711013.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:53.722Z,1516711013.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:54.098Z,1516711014.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:54.131Z,1516711014.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:54.501Z,1516711014.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:54.516Z,1516711014.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:54.900Z,1516711014.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:54.921Z,1516711014.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:55.298Z,1516711015.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:55.331Z,1516711015.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:55.704Z,1516711015.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:55.719Z,1516711015.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:56.104Z,1516711016.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:56.119Z,1516711016.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:56.506Z,1516711016.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:56.533Z,1516711016.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:56.904Z,1516711016.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:56.919Z,1516711016.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:57.280Z,1516711017.280 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:36:57.304Z,1516711017.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:57.329Z,1516711017.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:57.700Z,1516711017.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:57.725Z,1516711017.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:58.104Z,1516711018.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:58.129Z,1516711018.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:58.500Z,1516711018.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:58.523Z,1516711018.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:58.918Z,1516711018.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:58.941Z,1516711018.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:59.294Z,1516711019.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:59.320Z,1516711019.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:36:59.705Z,1516711019.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:36:59.724Z,1516711019.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:00.100Z,1516711020.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:00.133Z,1516711020.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:03.206Z,1516711023.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:03.221Z,1516711023.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:03.321Z,1516711023.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:03.369Z,1516711023.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:03.681Z,1516711023.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:03.696Z,1516711023.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:04.077Z,1516711024.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:04.092Z,1516711024.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:04.470Z,1516711024.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:04.486Z,1516711024.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:04.868Z,1516711024.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:04.901Z,1516711024.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:05.278Z,1516711025.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:05.293Z,1516711025.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:05.679Z,1516711025.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:05.695Z,1516711025.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:06.068Z,1516711026.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:06.101Z,1516711026.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:06.476Z,1516711026.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:06.492Z,1516711026.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:06.872Z,1516711026.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:06.888Z,1516711026.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:07.267Z,1516711027.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:07.290Z,1516711027.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:07.676Z,1516711027.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:07.692Z,1516711027.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:08.082Z,1516711028.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:08.098Z,1516711028.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:08.448Z,1516711028.448 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:37:08.477Z,1516711028.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:08.492Z,1516711028.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:08.872Z,1516711028.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:08.887Z,1516711028.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:09.284Z,1516711029.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:09.299Z,1516711029.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:09.686Z,1516711029.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:09.705Z,1516711029.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:10.082Z,1516711030.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:10.104Z,1516711030.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:10.464Z,1516711030.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:10.500Z,1516711030.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:10.864Z,1516711030.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:10.890Z,1516711030.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:11.265Z,1516711031.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:11.297Z,1516711031.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:11.681Z,1516711031.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:11.697Z,1516711031.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:12.080Z,1516711032.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:12.110Z,1516711032.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:12.485Z,1516711032.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:12.521Z,1516711032.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:12.874Z,1516711032.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:12.901Z,1516711032.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:13.264Z,1516711033.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:13.301Z,1516711033.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:13.668Z,1516711033.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:13.702Z,1516711033.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:14.062Z,1516711034.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:14.077Z,1516711034.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:14.465Z,1516711034.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:14.481Z,1516711034.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:14.864Z,1516711034.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:14.879Z,1516711034.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:15.279Z,1516711035.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:15.303Z,1516711035.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:15.684Z,1516711035.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:15.715Z,1516711035.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:16.087Z,1516711036.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:16.116Z,1516711036.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:16.469Z,1516711036.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:16.484Z,1516711036.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:16.876Z,1516711036.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:16.913Z,1516711036.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:17.272Z,1516711037.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:17.287Z,1516711037.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:17.669Z,1516711037.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:17.692Z,1516711037.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:18.075Z,1516711038.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:18.091Z,1516711038.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:18.479Z,1516711038.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:18.494Z,1516711038.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:18.875Z,1516711038.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:18.897Z,1516711038.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:19.274Z,1516711039.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:19.289Z,1516711039.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:19.673Z,1516711039.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:19.700Z,1516711039.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:20.071Z,1516711040.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:20.086Z,1516711040.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:20.472Z,1516711040.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:20.487Z,1516711040.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:20.871Z,1516711040.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:20.886Z,1516711040.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:21.275Z,1516711041.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:21.291Z,1516711041.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:21.687Z,1516711041.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:21.702Z,1516711041.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:22.077Z,1516711042.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:22.096Z,1516711042.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:22.471Z,1516711042.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:22.486Z,1516711042.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:22.868Z,1516711042.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:22.897Z,1516711042.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:23.273Z,1516711043.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:23.288Z,1516711043.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:23.677Z,1516711043.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:23.693Z,1516711043.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:24.076Z,1516711044.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:24.097Z,1516711044.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:24.479Z,1516711044.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:24.500Z,1516711044.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:24.879Z,1516711044.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:24.901Z,1516711044.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:25.280Z,1516711045.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:25.294Z,1516711045.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:25.680Z,1516711045.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:25.695Z,1516711045.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:26.069Z,1516711046.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:26.089Z,1516711046.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:26.469Z,1516711046.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:26.491Z,1516711046.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:26.872Z,1516711046.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:26.887Z,1516711046.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:27.283Z,1516711047.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:27.301Z,1516711047.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:27.684Z,1516711047.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:27.698Z,1516711047.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:28.082Z,1516711048.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:28.100Z,1516711048.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:28.470Z,1516711048.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:28.486Z,1516711048.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:28.872Z,1516711048.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:28.890Z,1516711048.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:29.273Z,1516711049.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:29.288Z,1516711049.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:29.681Z,1516711049.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:29.696Z,1516711049.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:30.083Z,1516711050.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:30.098Z,1516711050.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:30.481Z,1516711050.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:30.500Z,1516711050.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:30.883Z,1516711050.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:30.898Z,1516711050.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:31.272Z,1516711051.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:31.293Z,1516711051.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:31.676Z,1516711051.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:31.696Z,1516711051.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:32.070Z,1516711052.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:32.086Z,1516711052.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:32.468Z,1516711052.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:32.495Z,1516711052.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:32.872Z,1516711052.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:32.887Z,1516711052.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:33.284Z,1516711053.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:33.299Z,1516711053.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:33.686Z,1516711053.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:33.705Z,1516711053.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:34.083Z,1516711054.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:34.104Z,1516711054.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:34.462Z,1516711054.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:34.490Z,1516711054.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:34.885Z,1516711054.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:34.900Z,1516711054.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:35.273Z,1516711055.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:35.292Z,1516711055.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:35.682Z,1516711055.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:35.697Z,1516711055.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:36.087Z,1516711056.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:36.102Z,1516711056.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:36.486Z,1516711056.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:36.508Z,1516711056.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:36.887Z,1516711056.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:36.903Z,1516711056.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:37.273Z,1516711057.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:37.289Z,1516711057.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:37.674Z,1516711057.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:37.689Z,1516711057.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:38.073Z,1516711058.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:38.089Z,1516711058.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:38.468Z,1516711058.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:38.503Z,1516711058.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:38.872Z,1516711058.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:38.892Z,1516711058.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:39.286Z,1516711059.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:39.301Z,1516711059.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:39.687Z,1516711059.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:39.702Z,1516711059.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:40.084Z,1516711060.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:40.099Z,1516711060.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:40.475Z,1516711060.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:40.499Z,1516711060.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:40.882Z,1516711060.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:40.901Z,1516711060.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:41.266Z,1516711061.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:41.297Z,1516711061.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:41.684Z,1516711061.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:41.699Z,1516711061.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:42.084Z,1516711062.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:42.111Z,1516711062.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:42.492Z,1516711062.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:42.506Z,1516711062.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:42.891Z,1516711062.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:42.906Z,1516711062.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:43.265Z,1516711063.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:43.293Z,1516711063.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:43.669Z,1516711063.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:43.706Z,1516711063.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:44.062Z,1516711064.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:44.078Z,1516711064.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:44.474Z,1516711064.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:44.523Z,1516711064.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:44.872Z,1516711064.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:44.912Z,1516711064.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:45.280Z,1516711065.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:45.312Z,1516711065.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:45.701Z,1516711065.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:45.721Z,1516711065.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:46.083Z,1516711066.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:46.113Z,1516711066.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:46.463Z,1516711066.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:46.478Z,1516711066.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:46.875Z,1516711066.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:46.893Z,1516711066.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:47.273Z,1516711067.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:47.288Z,1516711067.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:47.673Z,1516711067.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:47.688Z,1516711067.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:48.075Z,1516711068.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:48.091Z,1516711068.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:48.479Z,1516711068.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:48.494Z,1516711068.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:48.875Z,1516711068.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:48.890Z,1516711068.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:49.271Z,1516711069.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:49.286Z,1516711069.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:49.670Z,1516711069.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:49.685Z,1516711069.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:50.070Z,1516711070.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:50.086Z,1516711070.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:50.472Z,1516711070.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:50.487Z,1516711070.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:50.871Z,1516711070.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:50.886Z,1516711070.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:51.275Z,1516711071.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:51.291Z,1516711071.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:51.691Z,1516711071.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:51.722Z,1516711071.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:52.075Z,1516711072.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:52.093Z,1516711072.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:52.471Z,1516711072.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:52.486Z,1516711072.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:52.870Z,1516711072.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:52.893Z,1516711072.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:53.276Z,1516711073.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:53.291Z,1516711073.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:53.677Z,1516711073.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:53.693Z,1516711073.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:54.078Z,1516711074.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:54.093Z,1516711074.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:54.479Z,1516711074.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:54.494Z,1516711074.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:54.879Z,1516711074.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:54.895Z,1516711074.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:55.272Z,1516711075.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:55.287Z,1516711075.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:55.674Z,1516711075.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:55.702Z,1516711075.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:56.071Z,1516711076.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:56.086Z,1516711076.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:56.468Z,1516711076.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:56.499Z,1516711076.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:56.872Z,1516711076.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:56.893Z,1516711076.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:57.278Z,1516711077.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:57.294Z,1516711077.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:57.679Z,1516711077.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:57.694Z,1516711077.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:58.077Z,1516711078.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:58.093Z,1516711078.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:58.471Z,1516711078.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:58.486Z,1516711078.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:58.868Z,1516711078.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:58.895Z,1516711078.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:59.273Z,1516711079.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:59.287Z,1516711079.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:37:59.681Z,1516711079.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:37:59.696Z,1516711079.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:00.082Z,1516711080.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:00.098Z,1516711080.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:00.485Z,1516711080.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:00.504Z,1516711080.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:03.652Z,1516711083.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:03.683Z,1516711083.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:03.777Z,1516711083.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:03.809Z,1516711083.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:04.132Z,1516711084.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:04.148Z,1516711084.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:04.537Z,1516711084.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:04.552Z,1516711084.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:04.932Z,1516711084.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:04.948Z,1516711084.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:05.337Z,1516711085.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:05.353Z,1516711085.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:05.739Z,1516711085.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:05.754Z,1516711085.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:06.138Z,1516711086.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:06.153Z,1516711086.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:06.532Z,1516711086.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:06.548Z,1516711086.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:06.933Z,1516711086.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:06.949Z,1516711086.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:07.332Z,1516711087.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:07.352Z,1516711087.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:07.732Z,1516711087.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:07.748Z,1516711087.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:08.138Z,1516711088.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:08.160Z,1516711088.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:08.537Z,1516711088.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:08.553Z,1516711088.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:08.937Z,1516711088.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:08.953Z,1516711088.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:09.333Z,1516711089.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:09.349Z,1516711089.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:09.732Z,1516711089.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:09.748Z,1516711089.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:10.132Z,1516711090.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:10.148Z,1516711090.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:10.534Z,1516711090.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:10.549Z,1516711090.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:10.932Z,1516711090.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:10.948Z,1516711090.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:11.337Z,1516711091.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:11.353Z,1516711091.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:11.739Z,1516711091.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:11.754Z,1516711091.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:12.137Z,1516711092.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:12.153Z,1516711092.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:12.532Z,1516711092.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:12.548Z,1516711092.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:12.933Z,1516711092.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:12.948Z,1516711092.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:13.332Z,1516711093.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:13.351Z,1516711093.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:13.732Z,1516711093.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:13.748Z,1516711093.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:14.138Z,1516711094.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:14.154Z,1516711094.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:14.537Z,1516711094.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:14.553Z,1516711094.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:14.938Z,1516711094.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:14.953Z,1516711094.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:15.333Z,1516711095.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:15.348Z,1516711095.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:15.732Z,1516711095.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:15.748Z,1516711095.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:16.138Z,1516711096.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:16.153Z,1516711096.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:16.534Z,1516711096.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:16.549Z,1516711096.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:16.928Z,1516711096.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:16.948Z,1516711096.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:17.338Z,1516711097.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:17.354Z,1516711097.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:17.738Z,1516711097.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:17.753Z,1516711097.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:18.138Z,1516711098.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:18.154Z,1516711098.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:18.533Z,1516711098.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:18.548Z,1516711098.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:18.933Z,1516711098.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:18.949Z,1516711098.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:19.329Z,1516711099.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:19.357Z,1516711099.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:19.737Z,1516711099.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:19.752Z,1516711099.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:20.143Z,1516711100.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:20.164Z,1516711100.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:20.543Z,1516711100.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:20.559Z,1516711100.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:20.943Z,1516711100.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:20.959Z,1516711100.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:21.334Z,1516711101.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:21.349Z,1516711101.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:21.739Z,1516711101.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:21.896Z,1516711101.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:22.133Z,1516711102.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:22.149Z,1516711102.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:22.535Z,1516711102.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:22.550Z,1516711102.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:22.934Z,1516711102.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:22.949Z,1516711102.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:23.338Z,1516711103.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:23.375Z,1516711103.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:23.744Z,1516711103.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:23.764Z,1516711103.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:24.145Z,1516711104.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:24.165Z,1516711104.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:24.533Z,1516711104.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:24.553Z,1516711104.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:24.934Z,1516711104.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:24.953Z,1516711104.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:25.329Z,1516711105.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:25.356Z,1516711105.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:25.741Z,1516711105.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:25.765Z,1516711105.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:26.148Z,1516711106.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:26.163Z,1516711106.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:26.542Z,1516711106.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:26.573Z,1516711106.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:26.951Z,1516711106.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:26.967Z,1516711106.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:27.326Z,1516711107.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:27.354Z,1516711107.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:27.725Z,1516711107.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:27.757Z,1516711107.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:28.124Z,1516711108.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:28.160Z,1516711108.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:28.525Z,1516711108.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:28.555Z,1516711108.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:28.924Z,1516711108.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:28.960Z,1516711108.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:29.340Z,1516711109.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:29.373Z,1516711109.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:29.754Z,1516711109.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:29.769Z,1516711109.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:30.144Z,1516711110.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:30.161Z,1516711110.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:30.524Z,1516711110.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:30.562Z,1516711110.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:30.924Z,1516711110.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:30.964Z,1516711110.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:31.329Z,1516711111.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:31.357Z,1516711111.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:31.724Z,1516711111.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:31.757Z,1516711111.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:32.135Z,1516711112.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:32.169Z,1516711112.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:32.535Z,1516711112.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:32.570Z,1516711112.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:32.935Z,1516711112.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:32.974Z,1516711112.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:33.328Z,1516711113.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:33.343Z,1516711113.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:33.722Z,1516711113.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:33.737Z,1516711113.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:34.136Z,1516711114.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:34.173Z,1516711114.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:34.533Z,1516711114.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:34.548Z,1516711114.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:34.926Z,1516711114.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:34.953Z,1516711114.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:35.340Z,1516711115.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:35.355Z,1516711115.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:35.739Z,1516711115.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:35.754Z,1516711115.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:36.138Z,1516711116.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:36.153Z,1516711116.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:36.532Z,1516711116.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:36.548Z,1516711116.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:36.933Z,1516711116.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:36.948Z,1516711116.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:37.332Z,1516711117.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:37.352Z,1516711117.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:37.732Z,1516711117.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:37.748Z,1516711117.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:38.138Z,1516711118.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:38.160Z,1516711118.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:38.537Z,1516711118.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:38.553Z,1516711118.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:38.936Z,1516711118.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:38.953Z,1516711118.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:39.333Z,1516711119.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:39.348Z,1516711119.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:39.728Z,1516711119.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:39.755Z,1516711119.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:40.132Z,1516711120.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:40.153Z,1516711120.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:40.533Z,1516711120.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:40.553Z,1516711120.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:40.922Z,1516711120.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:40.949Z,1516711120.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:41.342Z,1516711121.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:41.358Z,1516711121.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:41.746Z,1516711121.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:41.761Z,1516711121.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:42.142Z,1516711122.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:42.158Z,1516711122.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:42.528Z,1516711122.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:42.551Z,1516711122.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:42.934Z,1516711122.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:42.953Z,1516711122.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:43.332Z,1516711123.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:43.352Z,1516711123.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:43.731Z,1516711123.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:43.751Z,1516711123.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:43.753Z,1516711123.753 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:43.754Z,1516711123.754 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187 2018-01-23T12:38:43.754Z,1516711123.754 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:38:43.766Z,1516711123.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:38:44.144Z,1516711124.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:44.164Z,1516711124.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:44.201Z,1516711124.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:38:44.201Z,1516711124.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187 2018-01-23T12:38:44.540Z,1516711124.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:44.567Z,1516711124.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:44.567Z,1516711124.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187 2018-01-23T12:38:44.567Z,1516711124.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:38:44.569Z,1516711124.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:44.569Z,1516711124.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 187 2018-01-23T12:38:44.569Z,1516711124.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:38:44.570Z,1516711124.570 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:38:44.570Z,1516711124.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:38:44.575Z,1516711124.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:38:44.603Z,1516711124.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:38:44.603Z,1516711124.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:38:44.948Z,1516711124.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:44.973Z,1516711124.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:38:44.973Z,1516711124.973 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187 2018-01-23T12:38:44.974Z,1516711124.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:38:44.974Z,1516711124.974 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 187 2018-01-23T12:38:45.324Z,1516711125.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:45.363Z,1516711125.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:38:45.364Z,1516711125.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:38:45.364Z,1516711125.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:38:45.364Z,1516711125.364 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:38:45.365Z,1516711125.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:38:45.365Z,1516711125.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:38:45.724Z,1516711125.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:45.751Z,1516711125.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:38:45.752Z,1516711125.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:46.124Z,1516711126.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:46.160Z,1516711126.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:38:46.161Z,1516711126.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:46.529Z,1516711126.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:46.557Z,1516711126.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:38:46.558Z,1516711126.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:46.922Z,1516711126.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:46.937Z,1516711126.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:38:46.938Z,1516711126.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:47.342Z,1516711127.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:47.361Z,1516711127.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:38:47.362Z,1516711127.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:47.748Z,1516711127.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:47.762Z,1516711127.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:38:47.763Z,1516711127.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:48.143Z,1516711128.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:48.164Z,1516711128.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:38:48.165Z,1516711128.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:48.537Z,1516711128.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:48.553Z,1516711128.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:38:48.554Z,1516711128.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:48.925Z,1516711128.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:48.952Z,1516711128.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:38:48.953Z,1516711128.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:49.325Z,1516711129.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:49.357Z,1516711129.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:38:49.358Z,1516711129.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:49.724Z,1516711129.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:49.760Z,1516711129.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:38:49.761Z,1516711129.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:50.149Z,1516711130.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:50.164Z,1516711130.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:38:50.165Z,1516711130.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:50.535Z,1516711130.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:50.569Z,1516711130.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:38:50.570Z,1516711130.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:50.935Z,1516711130.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:50.972Z,1516711130.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:38:50.973Z,1516711130.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:51.329Z,1516711131.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:51.370Z,1516711131.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:38:51.371Z,1516711131.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:51.724Z,1516711131.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:51.764Z,1516711131.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:38:51.765Z,1516711131.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:52.135Z,1516711132.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:52.166Z,1516711132.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:38:52.171Z,1516711132.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:52.548Z,1516711132.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:52.580Z,1516711132.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:38:52.581Z,1516711132.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:52.939Z,1516711132.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:52.975Z,1516711132.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:38:52.976Z,1516711132.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:53.334Z,1516711133.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:53.349Z,1516711133.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:38:53.350Z,1516711133.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:53.730Z,1516711133.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:53.753Z,1516711133.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:38:53.754Z,1516711133.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:54.135Z,1516711134.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:54.151Z,1516711134.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:38:54.152Z,1516711134.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:54.539Z,1516711134.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:54.554Z,1516711134.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:38:54.555Z,1516711134.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:54.936Z,1516711134.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:54.951Z,1516711134.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:38:54.952Z,1516711134.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:55.332Z,1516711135.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:55.346Z,1516711135.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:38:55.348Z,1516711135.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:55.730Z,1516711135.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:55.753Z,1516711135.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:38:55.754Z,1516711135.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:56.139Z,1516711136.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:56.160Z,1516711136.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:38:56.161Z,1516711136.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:56.542Z,1516711136.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:56.557Z,1516711136.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:38:56.558Z,1516711136.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:56.942Z,1516711136.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:56.964Z,1516711136.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:38:56.965Z,1516711136.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:57.339Z,1516711137.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:57.355Z,1516711137.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:38:57.356Z,1516711137.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:57.728Z,1516711137.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:57.753Z,1516711137.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:38:57.754Z,1516711137.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:58.143Z,1516711138.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:58.164Z,1516711138.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:38:58.165Z,1516711138.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:58.548Z,1516711138.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:58.563Z,1516711138.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:38:58.564Z,1516711138.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:58.948Z,1516711138.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:58.962Z,1516711138.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:38:58.963Z,1516711138.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:58.967Z,1516711138.967 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:33:58.7Z 2018-01-23T12:38:58.967Z,1516711138.967 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:38:58.967Z,1516711138.967 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:38:59.326Z,1516711139.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:59.358Z,1516711139.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:38:59.359Z,1516711139.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:38:59.857Z,1516711139.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:38:59.871Z,1516711139.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T12:38:59.872Z,1516711139.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:00.140Z,1516711140.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:00.162Z,1516711140.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:39:00.167Z,1516711140.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:03.245Z,1516711143.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:03.259Z,1516711143.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T12:39:03.260Z,1516711143.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:03.355Z,1516711143.355 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0220.lzma 2018-01-23T12:39:03.404Z,1516711143.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:03.448Z,1516711143.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T12:39:03.449Z,1516711143.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:03.716Z,1516711143.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:03.757Z,1516711143.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:39:03.758Z,1516711143.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:04.096Z,1516711144.096 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0220.lzma.bak 2018-01-23T12:39:04.096Z,1516711144.096 [DataOverHttps](INFO): SBD MOMSN=7755581 2018-01-23T12:39:04.125Z,1516711144.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:04.171Z,1516711144.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:39:04.172Z,1516711144.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:04.760Z,1516711144.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:04.776Z,1516711144.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:04.910Z,1516711144.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:04.937Z,1516711144.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:08.020Z,1516711148.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:08.035Z,1516711148.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:08.148Z,1516711148.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:08.189Z,1516711148.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:08.522Z,1516711148.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:08.538Z,1516711148.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:08.918Z,1516711148.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:08.933Z,1516711148.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:09.313Z,1516711149.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:09.328Z,1516711149.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:09.710Z,1516711149.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:09.741Z,1516711149.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:12.872Z,1516711152.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:12.887Z,1516711152.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:12.963Z,1516711152.963 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0221.lzma 2018-01-23T12:39:12.000Z,1516711153.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:13.029Z,1516711153.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:13.370Z,1516711153.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:13.394Z,1516711153.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:13.737Z,1516711153.737 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0221.lzma.bak 2018-01-23T12:39:13.738Z,1516711153.738 [DataOverHttps](INFO): SBD MOMSN=7755583 2018-01-23T12:39:13.784Z,1516711153.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:13.799Z,1516711153.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:14.413Z,1516711154.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:14.429Z,1516711154.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:14.432Z,1516711154.432 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:39:14.432Z,1516711154.432 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:39:14.432Z,1516711154.432 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:39:14.560Z,1516711154.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:14.597Z,1516711154.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:17.675Z,1516711157.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:17.691Z,1516711157.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:17.804Z,1516711157.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:17.845Z,1516711157.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:18.152Z,1516711158.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:18.181Z,1516711158.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:18.545Z,1516711158.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:18.576Z,1516711158.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:18.933Z,1516711158.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:18.953Z,1516711158.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:19.341Z,1516711159.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:19.357Z,1516711159.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:19.749Z,1516711159.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:19.788Z,1516711159.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:20.148Z,1516711160.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:20.175Z,1516711160.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:20.556Z,1516711160.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:20.586Z,1516711160.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:20.948Z,1516711160.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:20.988Z,1516711160.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:21.342Z,1516711161.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:21.358Z,1516711161.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:21.738Z,1516711161.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:21.758Z,1516711161.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:22.148Z,1516711162.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:22.163Z,1516711162.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:22.543Z,1516711162.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:22.565Z,1516711162.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:22.956Z,1516711162.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:22.991Z,1516711162.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:23.345Z,1516711163.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:23.360Z,1516711163.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:23.744Z,1516711163.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:23.765Z,1516711163.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:24.145Z,1516711164.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:24.165Z,1516711164.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:24.559Z,1516711164.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:24.574Z,1516711164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:24.944Z,1516711164.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:24.969Z,1516711164.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:25.345Z,1516711165.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:25.361Z,1516711165.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:25.738Z,1516711165.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:25.769Z,1516711165.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:26.146Z,1516711166.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:26.169Z,1516711166.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:26.554Z,1516711166.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:26.577Z,1516711166.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:26.956Z,1516711166.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:26.971Z,1516711166.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:27.345Z,1516711167.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:27.361Z,1516711167.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:27.732Z,1516711167.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:27.765Z,1516711167.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:28.152Z,1516711168.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:28.167Z,1516711168.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:28.555Z,1516711168.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:28.570Z,1516711168.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:28.951Z,1516711168.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:28.966Z,1516711168.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:29.333Z,1516711169.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:29.368Z,1516711169.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:29.745Z,1516711169.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:29.761Z,1516711169.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:30.131Z,1516711170.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:30.169Z,1516711170.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:30.552Z,1516711170.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:30.567Z,1516711170.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:30.956Z,1516711170.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:30.970Z,1516711170.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:31.351Z,1516711171.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:31.366Z,1516711171.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:31.741Z,1516711171.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:31.756Z,1516711171.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:32.140Z,1516711172.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:32.156Z,1516711172.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:32.545Z,1516711172.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:32.565Z,1516711172.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:32.941Z,1516711172.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:32.960Z,1516711172.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:33.381Z,1516711173.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:33.441Z,1516711173.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:33.750Z,1516711173.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:33.765Z,1516711173.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:34.193Z,1516711174.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:34.216Z,1516711174.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:34.537Z,1516711174.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:34.557Z,1516711174.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:34.934Z,1516711174.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:34.965Z,1516711174.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:35.333Z,1516711175.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:35.368Z,1516711175.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:35.745Z,1516711175.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:35.761Z,1516711175.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:36.202Z,1516711176.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:36.225Z,1516711176.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:36.552Z,1516711176.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:36.567Z,1516711176.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:36.956Z,1516711176.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:36.971Z,1516711176.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:37.348Z,1516711177.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:37.371Z,1516711177.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:37.732Z,1516711177.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:37.761Z,1516711177.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:38.132Z,1516711178.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:38.181Z,1516711178.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:38.541Z,1516711178.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:38.569Z,1516711178.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:38.933Z,1516711178.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:38.968Z,1516711178.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:39.348Z,1516711179.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:39.371Z,1516711179.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:39.757Z,1516711179.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:39.772Z,1516711179.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:40.148Z,1516711180.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:40.181Z,1516711180.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:40.530Z,1516711180.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:40.558Z,1516711180.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:40.932Z,1516711180.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:40.970Z,1516711180.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:41.332Z,1516711181.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:41.373Z,1516711181.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:41.737Z,1516711181.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:41.770Z,1516711181.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:42.136Z,1516711182.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:42.154Z,1516711182.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:42.548Z,1516711182.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:42.583Z,1516711182.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:42.948Z,1516711182.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:42.983Z,1516711182.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:43.348Z,1516711183.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:43.379Z,1516711183.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:43.741Z,1516711183.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:43.756Z,1516711183.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:44.140Z,1516711184.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:44.155Z,1516711184.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:44.538Z,1516711184.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:44.561Z,1516711184.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:44.942Z,1516711184.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:44.957Z,1516711184.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:45.344Z,1516711185.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:45.360Z,1516711185.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:45.760Z,1516711185.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:45.783Z,1516711185.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:46.143Z,1516711186.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:46.159Z,1516711186.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:46.537Z,1516711186.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:46.568Z,1516711186.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:46.940Z,1516711186.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:46.961Z,1516711186.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:47.343Z,1516711187.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:47.359Z,1516711187.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:47.740Z,1516711187.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:47.756Z,1516711187.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:48.137Z,1516711188.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:48.168Z,1516711188.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:48.554Z,1516711188.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:48.569Z,1516711188.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:48.953Z,1516711188.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:48.969Z,1516711188.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:49.352Z,1516711189.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:49.368Z,1516711189.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:49.739Z,1516711189.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:49.769Z,1516711189.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:50.130Z,1516711190.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:50.162Z,1516711190.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:50.533Z,1516711190.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:50.561Z,1516711190.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:50.932Z,1516711190.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:50.970Z,1516711190.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:51.352Z,1516711191.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:51.367Z,1516711191.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:51.755Z,1516711191.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:51.771Z,1516711191.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:52.151Z,1516711192.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:52.180Z,1516711192.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:52.530Z,1516711192.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:52.562Z,1516711192.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:52.932Z,1516711192.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:52.959Z,1516711192.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:53.332Z,1516711193.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:53.372Z,1516711193.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:53.737Z,1516711193.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:53.764Z,1516711193.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:54.132Z,1516711194.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:54.165Z,1516711194.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:54.549Z,1516711194.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:54.571Z,1516711194.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:54.955Z,1516711194.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:54.974Z,1516711194.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:55.352Z,1516711195.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:55.367Z,1516711195.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:55.732Z,1516711195.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:55.772Z,1516711195.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:56.130Z,1516711196.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:56.158Z,1516711196.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:56.533Z,1516711196.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:56.568Z,1516711196.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:56.936Z,1516711196.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:56.971Z,1516711196.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:57.344Z,1516711197.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:57.377Z,1516711197.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:57.760Z,1516711197.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:57.775Z,1516711197.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:58.143Z,1516711198.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:58.179Z,1516711198.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:58.530Z,1516711198.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:58.545Z,1516711198.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:58.932Z,1516711198.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:58.953Z,1516711198.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:59.340Z,1516711199.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:59.356Z,1516711199.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:39:59.741Z,1516711199.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:39:59.757Z,1516711199.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:00.137Z,1516711200.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:00.153Z,1516711200.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:00.548Z,1516711200.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:00.575Z,1516711200.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:00.951Z,1516711200.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:00.983Z,1516711200.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:01.348Z,1516711201.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:01.375Z,1516711201.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:01.737Z,1516711201.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:01.776Z,1516711201.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:02.134Z,1516711202.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:02.161Z,1516711202.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:02.542Z,1516711202.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:02.558Z,1516711202.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:02.940Z,1516711202.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:02.955Z,1516711202.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:03.343Z,1516711203.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:03.365Z,1516711203.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:03.752Z,1516711203.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:03.767Z,1516711203.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:04.146Z,1516711204.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:04.162Z,1516711204.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:04.537Z,1516711204.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:04.557Z,1516711204.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:04.940Z,1516711204.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:04.961Z,1516711204.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:05.341Z,1516711205.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:05.357Z,1516711205.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:05.740Z,1516711205.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:05.767Z,1516711205.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:06.144Z,1516711206.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:06.165Z,1516711206.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:06.551Z,1516711206.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:06.566Z,1516711206.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:06.951Z,1516711206.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:06.966Z,1516711206.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:07.351Z,1516711207.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:07.366Z,1516711207.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:07.741Z,1516711207.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:07.764Z,1516711207.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:08.137Z,1516711208.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:08.157Z,1516711208.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:08.540Z,1516711208.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:08.560Z,1516711208.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:08.937Z,1516711208.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:08.967Z,1516711208.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:09.348Z,1516711209.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:09.383Z,1516711209.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:09.752Z,1516711209.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:09.767Z,1516711209.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:10.151Z,1516711210.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:10.172Z,1516711210.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:10.537Z,1516711210.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:10.557Z,1516711210.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:10.936Z,1516711210.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:10.967Z,1516711210.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:11.345Z,1516711211.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:11.361Z,1516711211.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:11.737Z,1516711211.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:11.761Z,1516711211.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:12.136Z,1516711212.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:12.163Z,1516711212.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:12.552Z,1516711212.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:12.572Z,1516711212.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:12.949Z,1516711212.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:12.976Z,1516711212.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:13.348Z,1516711213.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:13.370Z,1516711213.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:13.741Z,1516711213.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:13.770Z,1516711213.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:14.133Z,1516711214.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:14.165Z,1516711214.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:14.538Z,1516711214.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:14.569Z,1516711214.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:14.934Z,1516711214.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:14.961Z,1516711214.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:18.040Z,1516711218.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:18.072Z,1516711218.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:18.175Z,1516711218.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:18.191Z,1516711218.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:18.539Z,1516711218.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:18.575Z,1516711218.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:18.931Z,1516711218.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:18.946Z,1516711218.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:19.331Z,1516711219.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:19.346Z,1516711219.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:19.724Z,1516711219.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:19.751Z,1516711219.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:20.124Z,1516711220.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:20.145Z,1516711220.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:20.535Z,1516711220.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:20.552Z,1516711220.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:20.936Z,1516711220.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:20.953Z,1516711220.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:21.335Z,1516711221.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:21.351Z,1516711221.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:21.727Z,1516711221.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:21.742Z,1516711221.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:22.120Z,1516711222.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:22.143Z,1516711222.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:22.535Z,1516711222.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:22.551Z,1516711222.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:22.932Z,1516711222.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:22.948Z,1516711222.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:23.335Z,1516711223.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:23.351Z,1516711223.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:23.737Z,1516711223.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:23.760Z,1516711223.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:24.139Z,1516711224.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:24.155Z,1516711224.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:24.536Z,1516711224.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:24.551Z,1516711224.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:24.924Z,1516711224.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:24.953Z,1516711224.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:25.324Z,1516711225.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:25.340Z,1516711225.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:25.730Z,1516711225.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:25.754Z,1516711225.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:26.132Z,1516711226.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:26.154Z,1516711226.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:26.535Z,1516711226.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:26.551Z,1516711226.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:26.938Z,1516711226.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:26.961Z,1516711226.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:27.338Z,1516711227.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:27.357Z,1516711227.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:27.732Z,1516711227.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:27.748Z,1516711227.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:28.125Z,1516711228.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:28.144Z,1516711228.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:28.520Z,1516711228.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:28.554Z,1516711228.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:28.927Z,1516711228.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:28.942Z,1516711228.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:29.339Z,1516711229.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:29.355Z,1516711229.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:29.738Z,1516711229.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:29.754Z,1516711229.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:30.134Z,1516711230.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:30.150Z,1516711230.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:30.527Z,1516711230.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:30.542Z,1516711230.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:30.929Z,1516711230.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:30.949Z,1516711230.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:31.328Z,1516711231.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:31.343Z,1516711231.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:31.720Z,1516711231.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:31.756Z,1516711231.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:32.126Z,1516711232.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:32.142Z,1516711232.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:32.543Z,1516711232.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:32.559Z,1516711232.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:32.946Z,1516711232.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:32.961Z,1516711232.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:33.340Z,1516711233.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:33.355Z,1516711233.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:33.719Z,1516711233.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:33.753Z,1516711233.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:34.122Z,1516711234.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:34.149Z,1516711234.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:34.526Z,1516711234.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:34.554Z,1516711234.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:34.916Z,1516711234.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:34.948Z,1516711234.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:35.341Z,1516711235.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:35.356Z,1516711235.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:35.739Z,1516711235.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:35.755Z,1516711235.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:36.140Z,1516711236.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:36.155Z,1516711236.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:36.521Z,1516711236.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:36.558Z,1516711236.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:36.923Z,1516711236.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:36.951Z,1516711236.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:37.319Z,1516711237.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:37.358Z,1516711237.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:37.721Z,1516711237.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:37.758Z,1516711237.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:38.125Z,1516711238.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:38.153Z,1516711238.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:38.529Z,1516711238.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:38.565Z,1516711238.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:38.945Z,1516711238.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:38.964Z,1516711238.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:39.343Z,1516711239.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:39.365Z,1516711239.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:39.720Z,1516711239.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:39.751Z,1516711239.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:40.117Z,1516711240.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:40.135Z,1516711240.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:40.524Z,1516711240.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:40.565Z,1516711240.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:40.925Z,1516711240.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:40.940Z,1516711240.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:41.339Z,1516711241.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:41.372Z,1516711241.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:41.740Z,1516711241.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:41.770Z,1516711241.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:42.132Z,1516711242.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:42.170Z,1516711242.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:42.523Z,1516711242.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:42.562Z,1516711242.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:42.930Z,1516711242.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:42.953Z,1516711242.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:43.325Z,1516711243.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:43.343Z,1516711243.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:43.730Z,1516711243.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:43.749Z,1516711243.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:44.131Z,1516711244.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:44.147Z,1516711244.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:44.531Z,1516711244.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:44.547Z,1516711244.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:44.933Z,1516711244.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:44.949Z,1516711244.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:45.332Z,1516711245.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:45.353Z,1516711245.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:45.727Z,1516711245.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:45.742Z,1516711245.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:46.127Z,1516711246.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:46.142Z,1516711246.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:46.524Z,1516711246.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:46.549Z,1516711246.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:46.927Z,1516711246.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:46.943Z,1516711246.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:47.337Z,1516711247.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:47.353Z,1516711247.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:47.734Z,1516711247.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:47.753Z,1516711247.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:48.136Z,1516711248.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:48.153Z,1516711248.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:48.525Z,1516711248.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:48.552Z,1516711248.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:48.924Z,1516711248.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:48.947Z,1516711248.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:49.326Z,1516711249.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:49.341Z,1516711249.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:49.726Z,1516711249.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:49.753Z,1516711249.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:50.126Z,1516711250.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:50.136Z,1516711250.136 [PNI_TCM](ERROR): CRC does not match. Expected:0x12644 got:0x6210 2018-01-23T12:40:50.175Z,1516711250.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:50.534Z,1516711250.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:50.558Z,1516711250.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:50.943Z,1516711250.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:50.958Z,1516711250.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:51.344Z,1516711251.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:51.365Z,1516711251.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:51.721Z,1516711251.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:51.752Z,1516711251.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:52.117Z,1516711252.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:52.153Z,1516711252.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:52.532Z,1516711252.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:52.548Z,1516711252.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:52.916Z,1516711252.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:52.960Z,1516711252.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:53.344Z,1516711253.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:53.364Z,1516711253.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:53.745Z,1516711253.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:53.769Z,1516711253.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:54.137Z,1516711254.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:54.153Z,1516711254.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:54.539Z,1516711254.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:54.557Z,1516711254.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:54.921Z,1516711254.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:54.953Z,1516711254.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:55.336Z,1516711255.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:55.364Z,1516711255.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:55.742Z,1516711255.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:55.764Z,1516711255.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:56.140Z,1516711256.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:56.160Z,1516711256.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:56.517Z,1516711256.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:56.556Z,1516711256.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:56.916Z,1516711256.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:56.957Z,1516711256.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:57.338Z,1516711257.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:57.354Z,1516711257.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:57.739Z,1516711257.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:57.773Z,1516711257.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:58.143Z,1516711258.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:58.151Z,1516711258.151 [PNI_TCM](ERROR): CRC does not match. Expected:0x15679 got:0x21275 2018-01-23T12:40:58.176Z,1516711258.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:58.519Z,1516711258.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:58.550Z,1516711258.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:58.917Z,1516711258.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:58.947Z,1516711258.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:59.338Z,1516711259.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:59.373Z,1516711259.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:40:59.747Z,1516711259.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:40:59.763Z,1516711259.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:00.149Z,1516711260.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:00.164Z,1516711260.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:00.520Z,1516711260.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:00.553Z,1516711260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:00.916Z,1516711260.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:00.954Z,1516711260.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:01.342Z,1516711261.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:01.361Z,1516711261.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:01.745Z,1516711261.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:01.770Z,1516711261.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:02.139Z,1516711262.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:02.161Z,1516711262.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:02.564Z,1516711262.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:02.604Z,1516711262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:02.983Z,1516711262.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:02.998Z,1516711262.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:03.328Z,1516711263.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:03.371Z,1516711263.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:03.749Z,1516711263.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:03.789Z,1516711263.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:04.142Z,1516711264.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:04.199Z,1516711264.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:04.519Z,1516711264.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:04.561Z,1516711264.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:04.922Z,1516711264.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:04.973Z,1516711264.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:05.351Z,1516711265.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:05.415Z,1516711265.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:05.737Z,1516711265.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:05.801Z,1516711265.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:06.162Z,1516711266.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:06.171Z,1516711266.171 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T12:41:06.208Z,1516711266.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:06.533Z,1516711266.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:06.585Z,1516711266.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:06.922Z,1516711266.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:06.950Z,1516711266.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:07.334Z,1516711267.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:07.376Z,1516711267.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:07.737Z,1516711267.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:07.807Z,1516711267.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:08.133Z,1516711268.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:08.189Z,1516711268.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:08.528Z,1516711268.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:08.617Z,1516711268.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:08.922Z,1516711268.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:09.007Z,1516711269.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:09.357Z,1516711269.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:09.428Z,1516711269.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:09.741Z,1516711269.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:09.782Z,1516711269.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:10.144Z,1516711270.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:10.216Z,1516711270.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:10.540Z,1516711270.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:10.589Z,1516711270.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:10.925Z,1516711270.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:10.949Z,1516711270.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:11.336Z,1516711271.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:11.377Z,1516711271.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:11.737Z,1516711271.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:11.776Z,1516711271.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:12.139Z,1516711272.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:12.184Z,1516711272.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:12.548Z,1516711272.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:12.608Z,1516711272.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:12.918Z,1516711272.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:12.960Z,1516711272.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:13.337Z,1516711273.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:13.364Z,1516711273.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:13.745Z,1516711273.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:13.812Z,1516711273.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:14.137Z,1516711274.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:14.158Z,1516711274.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:14.547Z,1516711274.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:14.581Z,1516711274.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:14.923Z,1516711274.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:14.993Z,1516711274.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:15.329Z,1516711275.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:15.358Z,1516711275.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:19.121Z,1516711279.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:19.159Z,1516711279.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:19.253Z,1516711279.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:19.285Z,1516711279.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:19.610Z,1516711279.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:19.625Z,1516711279.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:20.013Z,1516711280.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:20.027Z,1516711280.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:20.407Z,1516711280.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:20.428Z,1516711280.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:20.808Z,1516711280.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:20.823Z,1516711280.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:21.208Z,1516711281.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:21.228Z,1516711281.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:21.612Z,1516711281.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:21.633Z,1516711281.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:22.023Z,1516711282.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:22.038Z,1516711282.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:22.414Z,1516711282.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:22.429Z,1516711282.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:22.802Z,1516711282.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:22.817Z,1516711282.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:23.204Z,1516711283.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:23.225Z,1516711283.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:23.603Z,1516711283.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:23.618Z,1516711283.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:24.002Z,1516711284.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:24.088Z,1516711284.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:24.415Z,1516711284.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:24.430Z,1516711284.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:24.815Z,1516711284.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:24.830Z,1516711284.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:25.216Z,1516711285.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:25.231Z,1516711285.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:25.602Z,1516711285.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:25.617Z,1516711285.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:26.022Z,1516711286.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:26.037Z,1516711286.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:26.399Z,1516711286.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:26.414Z,1516711286.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:26.804Z,1516711286.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:26.873Z,1516711286.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:27.202Z,1516711287.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:27.220Z,1516711287.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:27.612Z,1516711287.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:27.633Z,1516711287.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:28.028Z,1516711288.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:28.055Z,1516711288.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:28.418Z,1516711288.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:28.433Z,1516711288.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:28.801Z,1516711288.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:28.835Z,1516711288.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:29.200Z,1516711289.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:29.237Z,1516711289.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:29.605Z,1516711289.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:29.636Z,1516711289.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:29.998Z,1516711289.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:30.023Z,1516711290.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:30.411Z,1516711290.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:30.449Z,1516711290.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:30.824Z,1516711290.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:30.841Z,1516711290.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:31.211Z,1516711291.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:31.249Z,1516711291.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:31.604Z,1516711291.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:31.643Z,1516711291.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:32.000Z,1516711292.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:32.049Z,1516711292.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:32.398Z,1516711292.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:32.413Z,1516711292.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:32.805Z,1516711292.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:32.841Z,1516711292.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:33.208Z,1516711293.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:33.223Z,1516711293.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:33.612Z,1516711293.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:33.643Z,1516711293.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:34.023Z,1516711294.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:34.047Z,1516711294.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:34.423Z,1516711294.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:34.456Z,1516711294.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:34.809Z,1516711294.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:34.829Z,1516711294.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:35.210Z,1516711295.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:35.225Z,1516711295.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:35.608Z,1516711295.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:35.624Z,1516711295.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:36.005Z,1516711296.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:36.021Z,1516711296.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:36.419Z,1516711296.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:36.434Z,1516711296.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:36.815Z,1516711296.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:36.830Z,1516711296.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:37.211Z,1516711297.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:37.226Z,1516711297.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:37.607Z,1516711297.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:37.622Z,1516711297.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:37.999Z,1516711297.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:38.020Z,1516711298.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:38.398Z,1516711298.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:38.413Z,1516711298.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:38.813Z,1516711298.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:38.844Z,1516711298.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:39.205Z,1516711299.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:39.219Z,1516711299.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:39.611Z,1516711299.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:39.627Z,1516711299.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:40.027Z,1516711300.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:40.051Z,1516711300.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:40.415Z,1516711300.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:40.455Z,1516711300.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:40.806Z,1516711300.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:40.821Z,1516711300.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:41.206Z,1516711301.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:41.228Z,1516711301.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:41.610Z,1516711301.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:41.625Z,1516711301.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:42.002Z,1516711302.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:42.029Z,1516711302.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:42.423Z,1516711302.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:42.438Z,1516711302.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:42.819Z,1516711302.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:42.834Z,1516711302.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:43.214Z,1516711303.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:43.233Z,1516711303.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:43.612Z,1516711303.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:43.628Z,1516711303.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:44.009Z,1516711304.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:44.024Z,1516711304.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:44.404Z,1516711304.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:44.424Z,1516711304.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:44.804Z,1516711304.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:44.837Z,1516711304.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:44.843Z,1516711304.843 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:44.843Z,1516711304.843 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188 2018-01-23T12:41:44.843Z,1516711304.843 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:41:44.872Z,1516711304.872 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:41:45.206Z,1516711305.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:45.232Z,1516711305.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:45.244Z,1516711305.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:41:45.244Z,1516711305.244 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188 2018-01-23T12:41:45.615Z,1516711305.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:45.643Z,1516711305.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:45.643Z,1516711305.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188 2018-01-23T12:41:45.643Z,1516711305.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:41:45.645Z,1516711305.645 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:45.645Z,1516711305.645 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 188 2018-01-23T12:41:45.645Z,1516711305.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:41:45.646Z,1516711305.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:41:45.651Z,1516711305.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:41:45.651Z,1516711305.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:41:45.679Z,1516711305.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:41:45.679Z,1516711305.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:41:46.022Z,1516711306.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:46.048Z,1516711306.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:41:46.048Z,1516711306.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188 2018-01-23T12:41:46.049Z,1516711306.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:41:46.049Z,1516711306.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 188 2018-01-23T12:41:46.423Z,1516711306.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:46.437Z,1516711306.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:41:46.438Z,1516711306.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:41:46.438Z,1516711306.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:41:46.438Z,1516711306.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:41:46.439Z,1516711306.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:41:46.439Z,1516711306.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:41:46.800Z,1516711306.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:46.826Z,1516711306.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:41:46.827Z,1516711306.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:47.200Z,1516711307.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:47.233Z,1516711307.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:41:47.234Z,1516711307.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:47.601Z,1516711307.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:47.640Z,1516711307.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:41:47.641Z,1516711307.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:47.998Z,1516711307.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:48.025Z,1516711308.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:41:48.026Z,1516711308.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:48.419Z,1516711308.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:48.434Z,1516711308.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:41:48.435Z,1516711308.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:48.824Z,1516711308.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:48.838Z,1516711308.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:41:48.839Z,1516711308.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:49.215Z,1516711309.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:49.237Z,1516711309.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:41:49.238Z,1516711309.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:49.601Z,1516711309.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:49.628Z,1516711309.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:41:49.629Z,1516711309.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:49.999Z,1516711309.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:50.014Z,1516711310.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:41:50.039Z,1516711310.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:50.411Z,1516711310.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:50.437Z,1516711310.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:41:50.438Z,1516711310.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:50.815Z,1516711310.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:50.850Z,1516711310.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:41:50.855Z,1516711310.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:51.215Z,1516711311.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:51.250Z,1516711311.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:41:51.251Z,1516711311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:51.609Z,1516711311.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:51.624Z,1516711311.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:41:51.625Z,1516711311.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:52.005Z,1516711312.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:52.020Z,1516711312.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:41:52.021Z,1516711312.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:52.415Z,1516711312.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:52.430Z,1516711312.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:41:52.443Z,1516711312.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:52.819Z,1516711312.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:52.834Z,1516711312.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:41:52.847Z,1516711312.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:53.211Z,1516711313.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:53.226Z,1516711313.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:41:53.227Z,1516711313.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:53.609Z,1516711313.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:53.628Z,1516711313.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:41:53.629Z,1516711313.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:54.006Z,1516711314.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:54.021Z,1516711314.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:41:54.022Z,1516711314.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:54.411Z,1516711314.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:54.426Z,1516711314.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:41:54.427Z,1516711314.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:54.815Z,1516711314.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:54.829Z,1516711314.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:41:54.830Z,1516711314.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:55.212Z,1516711315.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:55.226Z,1516711315.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:41:55.227Z,1516711315.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:55.606Z,1516711315.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:55.631Z,1516711315.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:41:55.632Z,1516711315.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:56.009Z,1516711316.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:56.024Z,1516711316.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:41:56.025Z,1516711316.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:56.412Z,1516711316.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:56.426Z,1516711316.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:41:56.427Z,1516711316.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:56.815Z,1516711316.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:56.830Z,1516711316.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:41:56.831Z,1516711316.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:57.211Z,1516711317.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:57.232Z,1516711317.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:41:57.233Z,1516711317.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:57.610Z,1516711317.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:57.625Z,1516711317.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:41:57.626Z,1516711317.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:58.010Z,1516711318.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:58.025Z,1516711318.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:41:58.025Z,1516711318.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:58.411Z,1516711318.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:58.426Z,1516711318.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:41:58.427Z,1516711318.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:58.815Z,1516711318.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:58.830Z,1516711318.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:41:58.831Z,1516711318.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:59.212Z,1516711319.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:59.227Z,1516711319.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:41:59.228Z,1516711319.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:41:59.609Z,1516711319.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:41:59.628Z,1516711319.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:41:59.629Z,1516711319.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:00.005Z,1516711320.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:00.021Z,1516711320.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:42:00.022Z,1516711320.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:00.412Z,1516711320.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:00.427Z,1516711320.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:42:00.428Z,1516711320.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:00.815Z,1516711320.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:00.830Z,1516711320.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:42:00.831Z,1516711320.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:01.212Z,1516711321.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:01.227Z,1516711321.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:42:01.228Z,1516711321.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:01.606Z,1516711321.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:01.633Z,1516711321.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:42:01.634Z,1516711321.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:02.009Z,1516711322.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:02.024Z,1516711322.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:42:02.024Z,1516711322.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:02.413Z,1516711322.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:02.433Z,1516711322.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:42:02.434Z,1516711322.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:02.817Z,1516711322.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:02.837Z,1516711322.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:42:02.838Z,1516711322.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:03.219Z,1516711323.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:03.233Z,1516711323.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:42:03.234Z,1516711323.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:03.609Z,1516711323.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:03.629Z,1516711323.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:42:03.630Z,1516711323.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:04.009Z,1516711324.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:04.023Z,1516711324.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:42:04.024Z,1516711324.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:04.420Z,1516711324.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:04.434Z,1516711324.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:42:04.435Z,1516711324.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:04.819Z,1516711324.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:04.834Z,1516711324.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:42:04.835Z,1516711324.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:05.220Z,1516711325.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:05.234Z,1516711325.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:42:05.235Z,1516711325.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:05.611Z,1516711325.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:05.626Z,1516711325.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:42:05.627Z,1516711325.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:06.002Z,1516711326.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:06.035Z,1516711326.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:06.419Z,1516711326.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:06.434Z,1516711326.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:06.820Z,1516711326.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:06.835Z,1516711326.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:07.218Z,1516711327.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:07.241Z,1516711327.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:07.608Z,1516711327.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:07.636Z,1516711327.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:08.014Z,1516711328.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:08.030Z,1516711328.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:08.417Z,1516711328.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:08.449Z,1516711328.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:08.828Z,1516711328.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:08.843Z,1516711328.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:09.218Z,1516711329.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:09.235Z,1516711329.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:09.601Z,1516711329.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:09.629Z,1516711329.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:10.000Z,1516711330.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:10.026Z,1516711330.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:10.418Z,1516711330.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:10.443Z,1516711330.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:10.823Z,1516711330.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:10.839Z,1516711330.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:11.219Z,1516711331.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:11.234Z,1516711331.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:11.601Z,1516711331.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:11.640Z,1516711331.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:11.998Z,1516711331.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:12.025Z,1516711332.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:12.421Z,1516711332.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:12.441Z,1516711332.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:12.824Z,1516711332.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:12.838Z,1516711332.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:13.220Z,1516711333.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:13.238Z,1516711333.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:13.609Z,1516711333.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:13.635Z,1516711333.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:14.000Z,1516711334.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:14.037Z,1516711334.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:14.419Z,1516711334.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:14.434Z,1516711334.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:14.820Z,1516711334.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:14.850Z,1516711334.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:15.219Z,1516711335.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:15.245Z,1516711335.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:15.601Z,1516711335.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:15.637Z,1516711335.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:18.709Z,1516711338.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:18.734Z,1516711338.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:18.843Z,1516711338.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:18.880Z,1516711338.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:19.191Z,1516711339.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:19.206Z,1516711339.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:19.595Z,1516711339.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:19.628Z,1516711339.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:19.985Z,1516711339.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:20.001Z,1516711340.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:20.383Z,1516711340.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:20.398Z,1516711340.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:20.785Z,1516711340.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:20.804Z,1516711340.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:21.185Z,1516711341.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:21.201Z,1516711341.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:21.587Z,1516711341.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:21.603Z,1516711341.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:21.991Z,1516711341.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:22.006Z,1516711342.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:22.399Z,1516711342.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:22.430Z,1516711342.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:22.782Z,1516711342.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:22.806Z,1516711342.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:23.189Z,1516711343.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:23.204Z,1516711343.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:23.585Z,1516711343.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:23.605Z,1516711343.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:23.984Z,1516711343.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:24.008Z,1516711344.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:24.385Z,1516711344.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:24.399Z,1516711344.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:24.794Z,1516711344.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:24.809Z,1516711344.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:25.193Z,1516711345.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:25.213Z,1516711345.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:25.594Z,1516711345.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:25.609Z,1516711345.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:25.985Z,1516711345.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:26.005Z,1516711346.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:26.380Z,1516711346.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:26.416Z,1516711346.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:26.790Z,1516711346.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:26.804Z,1516711346.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:27.188Z,1516711347.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:27.209Z,1516711347.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:27.594Z,1516711347.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:27.609Z,1516711347.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:27.998Z,1516711347.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:28.013Z,1516711348.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:28.395Z,1516711348.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:28.410Z,1516711348.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:28.780Z,1516711348.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:28.802Z,1516711348.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:29.185Z,1516711349.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:29.204Z,1516711349.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:29.588Z,1516711349.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:29.609Z,1516711349.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:29.977Z,1516711349.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:30.003Z,1516711350.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:30.376Z,1516711350.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:30.413Z,1516711350.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:30.799Z,1516711350.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:30.814Z,1516711350.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:31.198Z,1516711351.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:31.213Z,1516711351.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:31.603Z,1516711351.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:31.624Z,1516711351.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:31.978Z,1516711351.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:32.004Z,1516711352.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:32.377Z,1516711352.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:32.413Z,1516711352.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:32.777Z,1516711352.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:32.814Z,1516711352.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:33.176Z,1516711353.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:33.212Z,1516711353.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:33.592Z,1516711353.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:33.613Z,1516711353.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:33.000Z,1516711354.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:34.015Z,1516711354.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:34.402Z,1516711354.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:34.417Z,1516711354.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:34.777Z,1516711354.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:34.812Z,1516711354.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:35.177Z,1516711355.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:35.213Z,1516711355.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:35.577Z,1516711355.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:35.613Z,1516711355.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:35.982Z,1516711355.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:36.008Z,1516711356.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:36.376Z,1516711356.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:36.414Z,1516711356.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:36.800Z,1516711356.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:36.815Z,1516711356.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:37.197Z,1516711357.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:37.225Z,1516711357.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:37.591Z,1516711357.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:37.620Z,1516711357.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:37.980Z,1516711357.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:38.017Z,1516711358.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:38.376Z,1516711358.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:38.413Z,1516711358.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:38.781Z,1516711358.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:38.796Z,1516711358.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:39.178Z,1516711359.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:39.193Z,1516711359.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:39.595Z,1516711359.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:39.621Z,1516711359.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:40.013Z,1516711360.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:40.028Z,1516711360.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:40.395Z,1516711360.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:40.421Z,1516711360.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:40.788Z,1516711360.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:40.824Z,1516711360.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:41.183Z,1516711361.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:41.198Z,1516711361.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:41.585Z,1516711361.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:41.605Z,1516711361.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:41.988Z,1516711361.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:42.003Z,1516711362.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:42.386Z,1516711362.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:42.401Z,1516711362.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:42.792Z,1516711362.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:42.807Z,1516711362.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:43.192Z,1516711363.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:43.213Z,1516711363.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:43.594Z,1516711363.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:43.609Z,1516711363.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:43.980Z,1516711363.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:44.005Z,1516711364.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:44.381Z,1516711364.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:44.404Z,1516711364.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:44.786Z,1516711364.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:44.802Z,1516711364.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:45.180Z,1516711365.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:45.202Z,1516711365.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:45.593Z,1516711365.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:45.617Z,1516711365.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:45.996Z,1516711365.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:46.011Z,1516711366.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:46.391Z,1516711366.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:46.415Z,1516711366.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:46.783Z,1516711366.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:46.802Z,1516711366.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:47.185Z,1516711367.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:47.200Z,1516711367.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:47.580Z,1516711367.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:47.605Z,1516711367.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:47.983Z,1516711367.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:48.003Z,1516711368.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:48.386Z,1516711368.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:48.401Z,1516711368.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:48.794Z,1516711368.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:48.810Z,1516711368.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:49.198Z,1516711369.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:49.213Z,1516711369.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:49.596Z,1516711369.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:49.611Z,1516711369.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:49.980Z,1516711369.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:50.002Z,1516711370.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:50.379Z,1516711370.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:50.411Z,1516711370.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:50.786Z,1516711370.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:50.801Z,1516711370.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:51.180Z,1516711371.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:51.203Z,1516711371.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:51.594Z,1516711371.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:51.609Z,1516711371.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:51.998Z,1516711371.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:52.020Z,1516711372.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:52.394Z,1516711372.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:52.410Z,1516711372.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:52.780Z,1516711372.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:52.803Z,1516711372.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:53.185Z,1516711373.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:53.205Z,1516711373.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:53.574Z,1516711373.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:53.601Z,1516711373.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:53.981Z,1516711373.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:54.004Z,1516711374.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:54.385Z,1516711374.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:54.400Z,1516711374.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:54.793Z,1516711374.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:54.813Z,1516711374.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:55.198Z,1516711375.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:55.213Z,1516711375.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:55.596Z,1516711375.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:55.610Z,1516711375.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:55.974Z,1516711375.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:56.002Z,1516711376.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:56.376Z,1516711376.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:56.402Z,1516711376.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:56.777Z,1516711376.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:56.805Z,1516711376.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:57.174Z,1516711377.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:57.209Z,1516711377.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:57.599Z,1516711377.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:57.614Z,1516711377.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:57.999Z,1516711377.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:58.020Z,1516711378.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:58.392Z,1516711378.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:58.422Z,1516711378.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:58.776Z,1516711378.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:58.802Z,1516711378.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:59.176Z,1516711379.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:59.212Z,1516711379.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:59.574Z,1516711379.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:42:59.601Z,1516711379.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:42:59.981Z,1516711379.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:00.007Z,1516711380.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:00.376Z,1516711380.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:00.410Z,1516711380.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:00.796Z,1516711380.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:00.811Z,1516711380.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:01.196Z,1516711381.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:01.226Z,1516711381.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:01.586Z,1516711381.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:01.621Z,1516711381.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:01.974Z,1516711381.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:01.997Z,1516711381.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:02.376Z,1516711382.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:02.412Z,1516711382.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:02.777Z,1516711382.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:02.814Z,1516711382.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:03.174Z,1516711383.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:03.189Z,1516711383.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:03.587Z,1516711383.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:03.613Z,1516711383.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:03.991Z,1516711383.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:04.027Z,1516711384.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:04.387Z,1516711384.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:04.413Z,1516711384.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:04.776Z,1516711384.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:04.817Z,1516711384.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:05.180Z,1516711385.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:05.195Z,1516711385.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:05.574Z,1516711385.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:05.589Z,1516711385.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:05.985Z,1516711385.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:06.016Z,1516711386.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:06.380Z,1516711386.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:06.395Z,1516711386.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:06.799Z,1516711386.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:06.823Z,1516711386.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:07.203Z,1516711387.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:07.233Z,1516711387.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:07.599Z,1516711387.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:07.623Z,1516711387.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:07.981Z,1516711387.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:08.001Z,1516711388.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:08.383Z,1516711388.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:08.398Z,1516711388.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:08.781Z,1516711388.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:08.807Z,1516711388.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:09.185Z,1516711389.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:09.205Z,1516711389.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:09.603Z,1516711389.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:09.634Z,1516711389.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:09.991Z,1516711389.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:10.006Z,1516711390.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:10.387Z,1516711390.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:10.403Z,1516711390.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:10.790Z,1516711390.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:10.805Z,1516711390.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:11.186Z,1516711391.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:11.201Z,1516711391.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:11.581Z,1516711391.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:11.600Z,1516711391.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:11.984Z,1516711391.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:11.999Z,1516711391.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:12.388Z,1516711392.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:12.403Z,1516711392.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:12.791Z,1516711392.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:12.807Z,1516711392.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:13.198Z,1516711393.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:13.213Z,1516711393.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:13.596Z,1516711393.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:13.616Z,1516711393.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:13.980Z,1516711393.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:14.013Z,1516711394.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:14.393Z,1516711394.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:14.408Z,1516711394.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:14.787Z,1516711394.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:14.802Z,1516711394.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:15.180Z,1516711395.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:15.209Z,1516711395.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:15.602Z,1516711395.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:15.617Z,1516711395.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:16.004Z,1516711396.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:16.018Z,1516711396.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:19.088Z,1516711399.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:19.104Z,1516711399.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:19.207Z,1516711399.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:19.223Z,1516711399.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:19.555Z,1516711399.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:19.576Z,1516711399.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:19.958Z,1516711399.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:20.001Z,1516711400.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:20.352Z,1516711400.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:20.385Z,1516711400.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:20.766Z,1516711400.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:20.789Z,1516711400.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:21.173Z,1516711401.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:21.188Z,1516711401.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:21.559Z,1516711401.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:21.600Z,1516711401.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:21.957Z,1516711401.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:21.993Z,1516711401.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:22.357Z,1516711402.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:22.377Z,1516711402.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:22.761Z,1516711402.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:22.781Z,1516711402.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:23.152Z,1516711403.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:23.174Z,1516711403.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:23.564Z,1516711403.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:23.590Z,1516711403.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:23.968Z,1516711403.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:23.976Z,1516711403.976 [PNI_TCM](ERROR): CRC does not match. Expected:0x16367 got:0x53016 2018-01-23T12:43:24.012Z,1516711404.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:24.365Z,1516711404.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:24.381Z,1516711404.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:24.753Z,1516711404.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:24.785Z,1516711404.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:25.148Z,1516711405.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:25.174Z,1516711405.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:25.568Z,1516711405.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:25.585Z,1516711405.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:25.968Z,1516711405.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:25.983Z,1516711405.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:26.363Z,1516711406.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:26.391Z,1516711406.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:26.755Z,1516711406.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:26.790Z,1516711406.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:27.157Z,1516711407.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:27.176Z,1516711407.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:27.561Z,1516711407.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:27.585Z,1516711407.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:27.965Z,1516711407.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:27.988Z,1516711407.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:28.363Z,1516711408.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:28.391Z,1516711408.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:28.745Z,1516711408.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:28.775Z,1516711408.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:29.144Z,1516711409.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:29.181Z,1516711409.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:29.571Z,1516711409.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:29.586Z,1516711409.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:29.965Z,1516711409.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:30.014Z,1516711410.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:30.359Z,1516711410.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:30.397Z,1516711410.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:30.749Z,1516711410.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:30.779Z,1516711410.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:31.142Z,1516711411.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:31.182Z,1516711411.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:31.563Z,1516711411.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:31.578Z,1516711411.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:31.968Z,1516711411.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:31.989Z,1516711411.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:32.374Z,1516711412.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:32.389Z,1516711412.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:32.745Z,1516711412.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:32.777Z,1516711412.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:33.148Z,1516711413.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:33.182Z,1516711413.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:33.555Z,1516711413.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:33.595Z,1516711413.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:33.968Z,1516711413.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:33.989Z,1516711413.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:34.355Z,1516711414.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:34.385Z,1516711414.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:34.745Z,1516711414.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:34.784Z,1516711414.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:35.144Z,1516711415.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:35.183Z,1516711415.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:35.555Z,1516711415.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:35.591Z,1516711415.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:35.972Z,1516711415.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:35.993Z,1516711415.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:36.355Z,1516711416.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:36.400Z,1516711416.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:36.749Z,1516711416.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:36.782Z,1516711416.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:37.142Z,1516711417.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:37.157Z,1516711417.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:37.559Z,1516711417.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:37.589Z,1516711417.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:37.959Z,1516711417.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:37.993Z,1516711417.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:38.356Z,1516711418.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:38.382Z,1516711418.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:38.745Z,1516711418.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:38.760Z,1516711418.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:39.144Z,1516711419.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:39.165Z,1516711419.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:39.555Z,1516711419.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:39.587Z,1516711419.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:39.967Z,1516711419.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:39.999Z,1516711419.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:40.362Z,1516711420.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:40.397Z,1516711420.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:40.750Z,1516711420.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:40.765Z,1516711420.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:41.156Z,1516711421.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:41.197Z,1516711421.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:41.563Z,1516711421.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:41.578Z,1516711421.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:41.959Z,1516711421.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:41.974Z,1516711421.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:42.359Z,1516711422.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:42.379Z,1516711422.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:42.754Z,1516711422.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:42.768Z,1516711422.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:43.148Z,1516711423.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:43.168Z,1516711423.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:43.557Z,1516711423.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:43.577Z,1516711423.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:43.958Z,1516711423.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:43.974Z,1516711423.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:44.358Z,1516711424.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:44.377Z,1516711424.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:44.752Z,1516711424.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:44.771Z,1516711424.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:45.153Z,1516711425.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:45.167Z,1516711425.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:45.558Z,1516711425.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:45.579Z,1516711425.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:45.963Z,1516711425.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:45.978Z,1516711425.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:46.363Z,1516711426.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:46.385Z,1516711426.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:46.758Z,1516711426.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:46.773Z,1516711426.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:47.153Z,1516711427.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:47.168Z,1516711427.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:47.563Z,1516711427.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:47.577Z,1516711427.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:47.962Z,1516711427.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:47.985Z,1516711427.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:48.363Z,1516711428.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:48.378Z,1516711428.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:48.754Z,1516711428.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:48.776Z,1516711428.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:49.149Z,1516711429.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:49.172Z,1516711429.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:49.562Z,1516711429.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:49.578Z,1516711429.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:49.966Z,1516711429.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:49.985Z,1516711429.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:50.360Z,1516711430.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:50.389Z,1516711430.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:50.746Z,1516711430.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:50.773Z,1516711430.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:51.144Z,1516711431.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:51.178Z,1516711431.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:51.560Z,1516711431.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:51.584Z,1516711431.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:51.968Z,1516711431.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:51.983Z,1516711431.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:52.372Z,1516711432.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:52.387Z,1516711432.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:52.745Z,1516711432.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:52.777Z,1516711432.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:53.144Z,1516711433.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:53.177Z,1516711433.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:53.562Z,1516711433.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:53.582Z,1516711433.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:53.967Z,1516711433.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:53.982Z,1516711433.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:54.360Z,1516711434.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:54.391Z,1516711434.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:54.745Z,1516711434.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:54.772Z,1516711434.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:55.144Z,1516711435.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:55.171Z,1516711435.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:55.560Z,1516711435.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:55.591Z,1516711435.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:55.968Z,1516711435.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:55.985Z,1516711435.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:56.360Z,1516711436.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:56.384Z,1516711436.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:56.763Z,1516711436.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:56.778Z,1516711436.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:57.145Z,1516711437.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:57.181Z,1516711437.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:57.562Z,1516711437.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:57.589Z,1516711437.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:57.969Z,1516711437.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:57.984Z,1516711437.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:58.361Z,1516711438.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:58.401Z,1516711438.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:58.750Z,1516711438.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:58.783Z,1516711438.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:59.145Z,1516711439.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:59.165Z,1516711439.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:59.564Z,1516711439.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:59.599Z,1516711439.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:43:59.956Z,1516711439.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:43:59.972Z,1516711439.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:00.360Z,1516711440.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:00.376Z,1516711440.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:00.750Z,1516711440.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:00.777Z,1516711440.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:01.149Z,1516711441.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:01.169Z,1516711441.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:01.550Z,1516711441.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:01.574Z,1516711441.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:01.963Z,1516711441.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:01.978Z,1516711441.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:02.360Z,1516711442.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:02.384Z,1516711442.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:02.763Z,1516711442.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:02.779Z,1516711442.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:03.157Z,1516711443.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:03.171Z,1516711443.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:03.542Z,1516711443.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:03.573Z,1516711443.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:03.957Z,1516711443.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:03.972Z,1516711443.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:04.344Z,1516711444.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:04.379Z,1516711444.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:04.764Z,1516711444.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:04.779Z,1516711444.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:05.166Z,1516711445.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:05.181Z,1516711445.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:05.562Z,1516711445.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:05.594Z,1516711445.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:05.956Z,1516711445.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:05.977Z,1516711445.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:06.360Z,1516711446.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:06.381Z,1516711446.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:06.745Z,1516711446.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:06.779Z,1516711446.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:07.143Z,1516711447.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:07.169Z,1516711447.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:07.544Z,1516711447.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:07.581Z,1516711447.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:07.968Z,1516711447.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:07.983Z,1516711447.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:08.365Z,1516711448.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:08.384Z,1516711448.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:08.763Z,1516711448.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:08.778Z,1516711448.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:09.144Z,1516711449.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:09.181Z,1516711449.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:09.542Z,1516711449.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:09.565Z,1516711449.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:09.945Z,1516711449.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:09.972Z,1516711449.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:10.348Z,1516711450.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:10.388Z,1516711450.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:10.759Z,1516711450.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:10.786Z,1516711450.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:11.159Z,1516711451.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:11.193Z,1516711451.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:11.554Z,1516711451.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:11.585Z,1516711451.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:11.942Z,1516711451.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:11.957Z,1516711451.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:12.352Z,1516711452.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:12.388Z,1516711452.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:12.744Z,1516711452.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:12.759Z,1516711452.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:13.149Z,1516711453.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:13.165Z,1516711453.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:13.556Z,1516711453.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:13.590Z,1516711453.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:13.963Z,1516711453.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:13.993Z,1516711453.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:14.363Z,1516711454.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:14.386Z,1516711454.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:14.767Z,1516711454.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:14.797Z,1516711454.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:14.800Z,1516711454.800 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:44:14.800Z,1516711454.800 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:44:14.800Z,1516711454.800 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:44:14.800Z,1516711454.800 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:44:15.152Z,1516711455.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:15.166Z,1516711455.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:15.169Z,1516711455.169 [Default:CheckIn:D] Stopped 2018-01-23T12:44:15.169Z,1516711455.169 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:44:15.549Z,1516711455.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:15.569Z,1516711455.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:15.572Z,1516711455.572 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 566.385156 min 2018-01-23T12:44:15.572Z,1516711455.572 [Default:CheckIn:E] Stopped 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn] Stopped 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn](INFO): Running loop #56 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn] Running Loop=56 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:44:15.573Z,1516711455.573 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:44:15.956Z,1516711455.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:15.971Z,1516711455.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:16.349Z,1516711456.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:16.377Z,1516711456.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:19.452Z,1516711459.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:19.468Z,1516711459.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:19.579Z,1516711459.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:19.617Z,1516711459.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:19.950Z,1516711459.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:19.965Z,1516711459.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:20.349Z,1516711460.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:20.351Z,1516711460.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:20.365Z,1516711460.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:20.744Z,1516711460.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:20.745Z,1516711460.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:20.760Z,1516711460.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:21.137Z,1516711461.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.138Z,1516711461.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.168Z,1516711461.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:21.532Z,1516711461.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.533Z,1516711461.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.567Z,1516711461.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:21.952Z,1516711461.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.953Z,1516711461.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:21.967Z,1516711461.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:22.355Z,1516711462.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:22.356Z,1516711462.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:22.370Z,1516711462.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:22.749Z,1516711462.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:22.750Z,1516711462.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:22.776Z,1516711462.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:23.132Z,1516711463.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.134Z,1516711463.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.165Z,1516711463.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:23.532Z,1516711463.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.533Z,1516711463.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.570Z,1516711463.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:23.933Z,1516711463.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.934Z,1516711463.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:23.971Z,1516711463.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:24.330Z,1516711464.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:24.331Z,1516711464.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:24.346Z,1516711464.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:24.759Z,1516711464.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:24.760Z,1516711464.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:24.775Z,1516711464.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:25.147Z,1516711465.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.148Z,1516711465.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.182Z,1516711465.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:25.544Z,1516711465.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.545Z,1516711465.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.580Z,1516711465.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:25.941Z,1516711465.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.941Z,1516711465.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:25.974Z,1516711465.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:26.344Z,1516711466.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:26.345Z,1516711466.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:26.373Z,1516711466.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:26.733Z,1516711466.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:26.734Z,1516711466.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:26.753Z,1516711466.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:27.135Z,1516711467.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.136Z,1516711467.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.150Z,1516711467.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:27.542Z,1516711467.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.543Z,1516711467.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.564Z,1516711467.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:27.955Z,1516711467.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.956Z,1516711467.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:27.970Z,1516711467.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:28.355Z,1516711468.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:28.356Z,1516711468.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:28.370Z,1516711468.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:28.752Z,1516711468.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:28.753Z,1516711468.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:28.767Z,1516711468.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:29.136Z,1516711469.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.137Z,1516711469.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.165Z,1516711469.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:29.195Z,1516711469.195 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:44:29.532Z,1516711469.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.533Z,1516711469.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.569Z,1516711469.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:29.937Z,1516711469.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.938Z,1516711469.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:29.966Z,1516711469.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:30.330Z,1516711470.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:30.331Z,1516711470.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:30.369Z,1516711470.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:30.756Z,1516711470.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:30.757Z,1516711470.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:30.771Z,1516711470.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:31.156Z,1516711471.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.157Z,1516711471.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.171Z,1516711471.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:31.551Z,1516711471.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.552Z,1516711471.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.567Z,1516711471.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:31.932Z,1516711471.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.933Z,1516711471.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:31.970Z,1516711471.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:32.333Z,1516711472.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:32.334Z,1516711472.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:32.368Z,1516711472.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:32.733Z,1516711472.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:32.734Z,1516711472.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:32.778Z,1516711472.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:33.137Z,1516711473.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.138Z,1516711473.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.177Z,1516711473.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:33.540Z,1516711473.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.541Z,1516711473.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.582Z,1516711473.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:33.947Z,1516711473.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.948Z,1516711473.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:33.975Z,1516711473.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:34.351Z,1516711474.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:34.352Z,1516711474.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:34.385Z,1516711474.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:34.747Z,1516711474.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:34.748Z,1516711474.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:34.780Z,1516711474.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:35.135Z,1516711475.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.136Z,1516711475.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.151Z,1516711475.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:35.537Z,1516711475.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.538Z,1516711475.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.553Z,1516711475.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:35.942Z,1516711475.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.943Z,1516711475.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:35.957Z,1516711475.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:36.336Z,1516711476.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:36.337Z,1516711476.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:36.357Z,1516711476.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:36.747Z,1516711476.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:36.748Z,1516711476.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:36.763Z,1516711476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:37.147Z,1516711477.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.148Z,1516711477.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.162Z,1516711477.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:37.545Z,1516711477.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.546Z,1516711477.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.568Z,1516711477.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:37.941Z,1516711477.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.942Z,1516711477.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:37.957Z,1516711477.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:38.342Z,1516711478.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:38.343Z,1516711478.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:38.357Z,1516711478.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:38.737Z,1516711478.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:38.738Z,1516711478.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:38.769Z,1516711478.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:39.140Z,1516711479.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.141Z,1516711479.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.164Z,1516711479.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:39.532Z,1516711479.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.533Z,1516711479.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.562Z,1516711479.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:39.951Z,1516711479.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.952Z,1516711479.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:39.973Z,1516711479.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:40.357Z,1516711480.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:40.358Z,1516711480.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:40.374Z,1516711480.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:40.749Z,1516711480.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:40.750Z,1516711480.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:40.777Z,1516711480.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:41.133Z,1516711481.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.134Z,1516711481.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.171Z,1516711481.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:41.531Z,1516711481.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.532Z,1516711481.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.573Z,1516711481.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:41.937Z,1516711481.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.938Z,1516711481.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:41.979Z,1516711481.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:42.331Z,1516711482.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:42.332Z,1516711482.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:42.346Z,1516711482.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:42.743Z,1516711482.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:42.744Z,1516711482.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:42.775Z,1516711482.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:43.155Z,1516711483.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.156Z,1516711483.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.183Z,1516711483.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:43.547Z,1516711483.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.549Z,1516711483.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.579Z,1516711483.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:43.940Z,1516711483.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.941Z,1516711483.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:43.961Z,1516711483.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:44.340Z,1516711484.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:44.341Z,1516711484.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:44.355Z,1516711484.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:44.737Z,1516711484.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:44.738Z,1516711484.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:44.757Z,1516711484.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:45.140Z,1516711485.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.141Z,1516711485.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.155Z,1516711485.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:45.541Z,1516711485.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.542Z,1516711485.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.556Z,1516711485.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:45.946Z,1516711485.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.947Z,1516711485.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:45.961Z,1516711485.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:45.964Z,1516711485.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:45.964Z,1516711485.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189 2018-01-23T12:44:45.964Z,1516711485.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:44:45.992Z,1516711485.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:44:46.349Z,1516711486.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:46.350Z,1516711486.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:46.369Z,1516711486.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:46.401Z,1516711486.401 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:44:46.401Z,1516711486.401 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189 2018-01-23T12:44:46.751Z,1516711486.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:46.752Z,1516711486.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:46.766Z,1516711486.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:46.766Z,1516711486.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189 2018-01-23T12:44:46.766Z,1516711486.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:44:46.768Z,1516711486.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:46.768Z,1516711486.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 189 2018-01-23T12:44:46.768Z,1516711486.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:44:46.769Z,1516711486.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:44:46.770Z,1516711486.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:44:46.770Z,1516711486.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:44:46.781Z,1516711486.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:44:46.781Z,1516711486.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:44:47.132Z,1516711487.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.134Z,1516711487.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.192Z,1516711487.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:44:47.192Z,1516711487.192 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189 2018-01-23T12:44:47.192Z,1516711487.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:44:47.192Z,1516711487.192 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 189 2018-01-23T12:44:47.532Z,1516711487.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.533Z,1516711487.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.568Z,1516711487.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:44:47.568Z,1516711487.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:44:47.569Z,1516711487.569 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:44:47.569Z,1516711487.569 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:44:47.569Z,1516711487.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:44:47.570Z,1516711487.570 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:44:47.933Z,1516711487.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.934Z,1516711487.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:47.972Z,1516711487.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:44:47.973Z,1516711487.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:48.330Z,1516711488.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:48.331Z,1516711488.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:48.345Z,1516711488.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:44:48.346Z,1516711488.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:48.743Z,1516711488.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:48.744Z,1516711488.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:48.774Z,1516711488.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:44:48.779Z,1516711488.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:49.155Z,1516711489.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.156Z,1516711489.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.181Z,1516711489.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:44:49.182Z,1516711489.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:49.547Z,1516711489.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.549Z,1516711489.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.578Z,1516711489.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:44:49.584Z,1516711489.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:49.938Z,1516711489.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.939Z,1516711489.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:49.971Z,1516711489.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:44:49.972Z,1516711489.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:50.341Z,1516711490.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:50.342Z,1516711490.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:50.356Z,1516711490.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:44:50.357Z,1516711490.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:50.742Z,1516711490.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:50.743Z,1516711490.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:50.773Z,1516711490.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:44:50.774Z,1516711490.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:51.144Z,1516711491.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.145Z,1516711491.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.159Z,1516711491.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:44:51.160Z,1516711491.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:51.541Z,1516711491.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.542Z,1516711491.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.556Z,1516711491.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:44:51.556Z,1516711491.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:51.946Z,1516711491.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.947Z,1516711491.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:51.961Z,1516711491.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:44:51.962Z,1516711491.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:52.347Z,1516711492.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:52.348Z,1516711492.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:52.362Z,1516711492.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:44:52.363Z,1516711492.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:52.747Z,1516711492.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:52.748Z,1516711492.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:52.761Z,1516711492.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:44:52.762Z,1516711492.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:53.136Z,1516711493.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.137Z,1516711493.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.157Z,1516711493.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:44:53.158Z,1516711493.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:53.545Z,1516711493.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.546Z,1516711493.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.560Z,1516711493.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:44:53.561Z,1516711493.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:53.942Z,1516711493.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.943Z,1516711493.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:53.956Z,1516711493.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:44:53.957Z,1516711493.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:54.340Z,1516711494.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:54.341Z,1516711494.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:54.355Z,1516711494.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:44:54.356Z,1516711494.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:54.746Z,1516711494.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:54.747Z,1516711494.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:54.768Z,1516711494.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:44:54.769Z,1516711494.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:55.151Z,1516711495.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.152Z,1516711495.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.165Z,1516711495.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:44:55.167Z,1516711495.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:55.546Z,1516711495.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.547Z,1516711495.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.561Z,1516711495.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:44:55.562Z,1516711495.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:55.940Z,1516711495.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.941Z,1516711495.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:55.955Z,1516711495.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:44:55.956Z,1516711495.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:56.341Z,1516711496.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:56.342Z,1516711496.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:56.355Z,1516711496.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:44:56.356Z,1516711496.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:56.740Z,1516711496.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:56.741Z,1516711496.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:56.755Z,1516711496.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:44:56.756Z,1516711496.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:57.140Z,1516711497.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.141Z,1516711497.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.167Z,1516711497.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:44:57.168Z,1516711497.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:57.545Z,1516711497.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.546Z,1516711497.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.564Z,1516711497.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:44:57.565Z,1516711497.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:57.950Z,1516711497.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.951Z,1516711497.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:57.965Z,1516711497.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:44:57.966Z,1516711497.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:58.351Z,1516711498.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:58.352Z,1516711498.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:58.366Z,1516711498.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:44:58.367Z,1516711498.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:58.751Z,1516711498.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:58.752Z,1516711498.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:58.772Z,1516711498.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:44:58.773Z,1516711498.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:59.138Z,1516711499.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.140Z,1516711499.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.153Z,1516711499.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:44:59.154Z,1516711499.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:59.536Z,1516711499.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.537Z,1516711499.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.563Z,1516711499.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:44:59.564Z,1516711499.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:44:59.946Z,1516711499.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.948Z,1516711499.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:44:59.961Z,1516711499.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:44:59.962Z,1516711499.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:00.330Z,1516711500.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:00.335Z,1516711500.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:00.362Z,1516711500.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:45:00.367Z,1516711500.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:00.751Z,1516711500.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:00.752Z,1516711500.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:00.766Z,1516711500.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:45:00.767Z,1516711500.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:01.155Z,1516711501.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.156Z,1516711501.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.170Z,1516711501.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:45:01.171Z,1516711501.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:01.551Z,1516711501.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.552Z,1516711501.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.566Z,1516711501.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:45:01.567Z,1516711501.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:01.932Z,1516711501.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.933Z,1516711501.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:01.968Z,1516711501.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:45:01.969Z,1516711501.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:02.337Z,1516711502.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:02.338Z,1516711502.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:02.365Z,1516711502.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:45:02.366Z,1516711502.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:02.733Z,1516711502.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:02.734Z,1516711502.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:02.764Z,1516711502.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:45:02.765Z,1516711502.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:03.133Z,1516711503.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.134Z,1516711503.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.168Z,1516711503.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:45:03.169Z,1516711503.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:03.536Z,1516711503.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.537Z,1516711503.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.570Z,1516711503.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:45:03.571Z,1516711503.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:03.943Z,1516711503.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.944Z,1516711503.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:03.981Z,1516711503.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:45:03.981Z,1516711503.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:04.360Z,1516711504.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:04.361Z,1516711504.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:04.375Z,1516711504.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:45:04.376Z,1516711504.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:04.744Z,1516711504.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:04.745Z,1516711504.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:04.776Z,1516711504.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:45:04.777Z,1516711504.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:05.130Z,1516711505.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.131Z,1516711505.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.145Z,1516711505.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:45:05.146Z,1516711505.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:05.544Z,1516711505.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.545Z,1516711505.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.581Z,1516711505.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:45:05.582Z,1516711505.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:05.945Z,1516711505.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.946Z,1516711505.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:05.981Z,1516711505.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:45:05.981Z,1516711505.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:06.337Z,1516711506.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:06.339Z,1516711506.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:06.353Z,1516711506.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:45:06.354Z,1516711506.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:06.755Z,1516711506.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:06.756Z,1516711506.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:06.791Z,1516711506.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:07.147Z,1516711507.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.148Z,1516711507.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.163Z,1516711507.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:07.546Z,1516711507.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.547Z,1516711507.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.562Z,1516711507.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:07.941Z,1516711507.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.942Z,1516711507.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:07.957Z,1516711507.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:08.342Z,1516711508.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:08.344Z,1516711508.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:08.358Z,1516711508.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:08.737Z,1516711508.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:08.739Z,1516711508.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:08.774Z,1516711508.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:09.137Z,1516711509.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.138Z,1516711509.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.161Z,1516711509.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:09.542Z,1516711509.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.543Z,1516711509.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.557Z,1516711509.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:09.946Z,1516711509.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.947Z,1516711509.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:09.962Z,1516711509.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:10.348Z,1516711510.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:10.349Z,1516711510.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:10.363Z,1516711510.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:10.747Z,1516711510.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:10.748Z,1516711510.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:10.769Z,1516711510.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:11.140Z,1516711511.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.141Z,1516711511.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.156Z,1516711511.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:11.536Z,1516711511.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.537Z,1516711511.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.563Z,1516711511.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:11.940Z,1516711511.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.941Z,1516711511.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:11.963Z,1516711511.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:12.341Z,1516711512.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:12.342Z,1516711512.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:12.361Z,1516711512.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:12.750Z,1516711512.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:12.751Z,1516711512.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:12.774Z,1516711512.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:13.160Z,1516711513.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.161Z,1516711513.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.176Z,1516711513.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:13.552Z,1516711513.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.553Z,1516711513.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.567Z,1516711513.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:13.936Z,1516711513.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.937Z,1516711513.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:13.966Z,1516711513.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:14.350Z,1516711514.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:14.352Z,1516711514.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:14.366Z,1516711514.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:14.733Z,1516711514.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:14.735Z,1516711514.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:14.761Z,1516711514.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:15.138Z,1516711515.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.139Z,1516711515.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.168Z,1516711515.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:15.541Z,1516711515.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.555Z,1516711515.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.570Z,1516711515.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:15.960Z,1516711515.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.961Z,1516711515.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:15.976Z,1516711515.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:16.357Z,1516711516.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:16.358Z,1516711516.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:16.373Z,1516711516.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:16.755Z,1516711516.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:16.756Z,1516711516.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:16.770Z,1516711516.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:19.851Z,1516711519.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:19.853Z,1516711519.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:19.867Z,1516711519.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:19.968Z,1516711519.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:19.969Z,1516711519.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:20.013Z,1516711520.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:20.335Z,1516711520.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:20.336Z,1516711520.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:20.369Z,1516711520.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:20.731Z,1516711520.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:20.732Z,1516711520.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:20.746Z,1516711520.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:21.122Z,1516711521.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:21.123Z,1516711521.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:21.137Z,1516711521.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:21.515Z,1516711521.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:21.516Z,1516711521.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:21.531Z,1516711521.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:21.922Z,1516711521.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:21.937Z,1516711521.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:22.310Z,1516711522.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:22.341Z,1516711522.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:22.722Z,1516711522.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:22.741Z,1516711522.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:23.123Z,1516711523.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:23.138Z,1516711523.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:23.521Z,1516711523.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:23.537Z,1516711523.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:23.913Z,1516711523.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:23.935Z,1516711523.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:24.317Z,1516711524.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:24.332Z,1516711524.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:24.722Z,1516711524.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:24.741Z,1516711524.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:25.123Z,1516711525.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:25.138Z,1516711525.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:25.522Z,1516711525.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:25.537Z,1516711525.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:25.913Z,1516711525.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:25.935Z,1516711525.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:26.316Z,1516711526.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:26.337Z,1516711526.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:26.722Z,1516711526.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:26.737Z,1516711526.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:27.123Z,1516711527.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:27.138Z,1516711527.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:27.520Z,1516711527.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:27.541Z,1516711527.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:27.918Z,1516711527.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:27.933Z,1516711527.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:28.313Z,1516711528.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:28.332Z,1516711528.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:28.722Z,1516711528.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:28.741Z,1516711528.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:29.127Z,1516711529.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:29.142Z,1516711529.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:29.522Z,1516711529.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:29.540Z,1516711529.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:29.916Z,1516711529.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:29.935Z,1516711529.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:30.317Z,1516711530.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:30.332Z,1516711530.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:30.722Z,1516711530.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:30.737Z,1516711530.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:31.135Z,1516711531.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:31.150Z,1516711531.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:31.527Z,1516711531.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:31.541Z,1516711531.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:31.918Z,1516711531.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:31.933Z,1516711531.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:32.310Z,1516711532.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:32.347Z,1516711532.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:32.727Z,1516711532.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:32.742Z,1516711532.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:33.127Z,1516711533.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:33.142Z,1516711533.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:33.524Z,1516711533.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:33.547Z,1516711533.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:33.918Z,1516711533.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:33.933Z,1516711533.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:34.312Z,1516711534.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:34.335Z,1516711534.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:34.722Z,1516711534.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:34.753Z,1516711534.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:35.130Z,1516711535.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:35.145Z,1516711535.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:35.524Z,1516711535.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:35.543Z,1516711535.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:35.909Z,1516711535.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:35.941Z,1516711535.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:36.309Z,1516711536.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:36.340Z,1516711536.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:36.731Z,1516711536.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:36.746Z,1516711536.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:37.131Z,1516711537.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:37.146Z,1516711537.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:37.528Z,1516711537.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:37.548Z,1516711537.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:37.910Z,1516711537.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:37.936Z,1516711537.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:38.308Z,1516711538.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:38.341Z,1516711538.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:38.731Z,1516711538.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:38.746Z,1516711538.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:39.124Z,1516711539.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:39.145Z,1516711539.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:39.526Z,1516711539.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:39.545Z,1516711539.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:39.910Z,1516711539.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:39.945Z,1516711539.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:40.306Z,1516711540.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:40.341Z,1516711540.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:40.734Z,1516711540.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:40.749Z,1516711540.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:41.131Z,1516711541.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:41.146Z,1516711541.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:41.524Z,1516711541.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:41.547Z,1516711541.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:41.909Z,1516711541.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:41.948Z,1516711541.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:42.310Z,1516711542.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:42.341Z,1516711542.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:42.709Z,1516711542.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:42.729Z,1516711542.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:43.127Z,1516711543.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:43.152Z,1516711543.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:43.543Z,1516711543.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:43.565Z,1516711543.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:43.927Z,1516711543.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:43.950Z,1516711543.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:44.320Z,1516711544.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:44.355Z,1516711544.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:44.717Z,1516711544.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:44.733Z,1516711544.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:45.114Z,1516711545.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:45.129Z,1516711545.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:45.514Z,1516711545.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:45.537Z,1516711545.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:45.932Z,1516711545.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:45.964Z,1516711545.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:46.324Z,1516711546.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:46.339Z,1516711546.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:46.720Z,1516711546.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:46.735Z,1516711546.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:47.116Z,1516711547.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:47.132Z,1516711547.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:47.516Z,1516711547.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:47.532Z,1516711547.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:47.916Z,1516711547.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:47.931Z,1516711547.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:48.314Z,1516711548.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:48.337Z,1516711548.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:48.717Z,1516711548.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:48.732Z,1516711548.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:49.122Z,1516711549.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:49.145Z,1516711549.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:49.527Z,1516711549.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:49.542Z,1516711549.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:49.927Z,1516711549.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:49.942Z,1516711549.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:50.329Z,1516711550.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:50.357Z,1516711550.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:50.722Z,1516711550.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:50.738Z,1516711550.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:51.109Z,1516711551.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:51.141Z,1516711551.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:51.527Z,1516711551.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:51.542Z,1516711551.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:51.924Z,1516711551.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:51.947Z,1516711551.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:52.328Z,1516711552.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:52.361Z,1516711552.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:52.733Z,1516711552.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:52.748Z,1516711552.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:53.111Z,1516711553.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:53.142Z,1516711553.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:53.514Z,1516711553.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:53.541Z,1516711553.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:53.910Z,1516711553.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:53.946Z,1516711553.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:54.310Z,1516711554.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:54.338Z,1516711554.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:54.709Z,1516711554.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:54.746Z,1516711554.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:55.120Z,1516711555.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:55.157Z,1516711555.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:55.538Z,1516711555.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:55.554Z,1516711555.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:55.920Z,1516711555.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:55.957Z,1516711555.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:56.308Z,1516711556.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:56.350Z,1516711556.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:56.708Z,1516711556.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:56.723Z,1516711556.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:57.114Z,1516711557.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:57.129Z,1516711557.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:57.513Z,1516711557.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:57.533Z,1516711557.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:57.930Z,1516711557.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:57.966Z,1516711557.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:58.331Z,1516711558.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:58.367Z,1516711558.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:58.724Z,1516711558.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:58.739Z,1516711558.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:59.117Z,1516711559.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:59.132Z,1516711559.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:59.516Z,1516711559.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:59.531Z,1516711559.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:45:59.912Z,1516711559.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:45:59.941Z,1516711559.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:00.322Z,1516711560.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:00.337Z,1516711560.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:00.716Z,1516711560.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:00.731Z,1516711560.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:01.121Z,1516711561.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:01.141Z,1516711561.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:01.523Z,1516711561.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:01.538Z,1516711561.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:01.924Z,1516711561.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:01.939Z,1516711561.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:02.316Z,1516711562.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:02.332Z,1516711562.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:02.717Z,1516711562.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:02.732Z,1516711562.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:03.116Z,1516711563.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:03.136Z,1516711563.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:03.516Z,1516711563.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:03.531Z,1516711563.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:03.922Z,1516711563.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:03.944Z,1516711563.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:04.327Z,1516711564.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:04.343Z,1516711564.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:04.725Z,1516711564.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:04.745Z,1516711564.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:05.117Z,1516711565.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:05.132Z,1516711565.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:05.524Z,1516711565.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:05.563Z,1516711565.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:05.922Z,1516711565.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:05.945Z,1516711565.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:06.324Z,1516711566.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:06.349Z,1516711566.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:06.723Z,1516711566.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:06.742Z,1516711566.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:07.149Z,1516711567.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:07.197Z,1516711567.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:07.534Z,1516711567.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:07.586Z,1516711567.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:07.928Z,1516711567.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:07.961Z,1516711567.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:08.312Z,1516711568.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:08.369Z,1516711568.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:08.708Z,1516711568.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:08.764Z,1516711568.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:09.119Z,1516711569.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:09.175Z,1516711569.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:09.552Z,1516711569.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:09.586Z,1516711569.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:09.960Z,1516711569.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:09.992Z,1516711569.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:10.326Z,1516711570.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:10.366Z,1516711570.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:10.733Z,1516711570.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:10.769Z,1516711570.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:11.123Z,1516711571.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:11.183Z,1516711571.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:11.523Z,1516711571.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:11.549Z,1516711571.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:11.936Z,1516711571.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:11.980Z,1516711571.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:12.311Z,1516711572.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:12.381Z,1516711572.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:12.714Z,1516711572.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:12.751Z,1516711572.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:13.148Z,1516711573.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:13.192Z,1516711573.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:13.529Z,1516711573.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:13.580Z,1516711573.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:13.955Z,1516711573.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:13.978Z,1516711573.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:14.322Z,1516711574.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:14.362Z,1516711574.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:14.715Z,1516711574.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:14.742Z,1516711574.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:15.122Z,1516711575.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:15.146Z,1516711575.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:15.522Z,1516711575.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:15.549Z,1516711575.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:15.930Z,1516711575.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:15.960Z,1516711575.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:16.336Z,1516711576.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:16.361Z,1516711576.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:16.734Z,1516711576.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:16.753Z,1516711576.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:17.111Z,1516711577.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:17.168Z,1516711577.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:21.353Z,1516711581.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:21.368Z,1516711581.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:21.484Z,1516711581.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:21.501Z,1516711581.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:21.871Z,1516711581.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:21.907Z,1516711581.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:22.271Z,1516711582.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:22.301Z,1516711582.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:22.671Z,1516711582.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:22.701Z,1516711582.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:23.057Z,1516711583.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:23.073Z,1516711583.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:23.456Z,1516711583.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:23.493Z,1516711583.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:23.854Z,1516711583.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:23.881Z,1516711583.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:24.256Z,1516711584.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:24.270Z,1516711584.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:24.656Z,1516711584.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:24.673Z,1516711584.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:25.068Z,1516711585.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:25.101Z,1516711585.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:25.460Z,1516711585.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:25.480Z,1516711585.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:25.871Z,1516711585.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:25.901Z,1516711585.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:26.249Z,1516711586.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:26.277Z,1516711586.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:26.661Z,1516711586.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:26.669Z,1516711586.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x10125 got:0x33961 2018-01-23T12:46:26.699Z,1516711586.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:27.062Z,1516711587.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:27.077Z,1516711587.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:27.454Z,1516711587.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:27.470Z,1516711587.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:27.861Z,1516711587.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:27.905Z,1516711587.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:28.261Z,1516711588.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:28.277Z,1516711588.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:28.662Z,1516711588.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:28.678Z,1516711588.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:29.056Z,1516711589.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:29.072Z,1516711589.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:29.449Z,1516711589.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:29.498Z,1516711589.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:29.853Z,1516711589.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:29.862Z,1516711589.862 [PNI_TCM](ERROR): CRC does not match. Expected:0x19492 got:0x6466 2018-01-23T12:46:29.907Z,1516711589.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:30.256Z,1516711590.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:30.271Z,1516711590.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:30.650Z,1516711590.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:30.673Z,1516711590.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:31.058Z,1516711591.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:31.104Z,1516711591.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:31.461Z,1516711591.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:31.476Z,1516711591.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:31.861Z,1516711591.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:31.877Z,1516711591.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:32.255Z,1516711592.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:32.270Z,1516711592.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:32.653Z,1516711592.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:32.678Z,1516711592.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:33.053Z,1516711593.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:33.071Z,1516711593.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:33.455Z,1516711593.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:33.470Z,1516711593.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:33.862Z,1516711593.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:33.877Z,1516711593.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:34.257Z,1516711594.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:34.299Z,1516711594.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:34.663Z,1516711594.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:34.705Z,1516711594.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:35.045Z,1516711595.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:35.083Z,1516711595.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:35.444Z,1516711595.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:35.481Z,1516711595.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:35.863Z,1516711595.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:35.897Z,1516711595.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:36.274Z,1516711596.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:36.282Z,1516711596.282 [PNI_TCM](ERROR): CRC does not match. Expected:0x48449 got:0x2929 2018-01-23T12:46:36.301Z,1516711596.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:36.661Z,1516711596.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:36.688Z,1516711596.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:37.047Z,1516711597.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:37.075Z,1516711597.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:37.443Z,1516711597.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:37.488Z,1516711597.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:37.860Z,1516711597.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:37.890Z,1516711597.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:38.262Z,1516711598.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:38.297Z,1516711598.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:38.657Z,1516711598.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:38.685Z,1516711598.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:39.045Z,1516711599.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:39.092Z,1516711599.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:39.448Z,1516711599.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:39.488Z,1516711599.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:39.856Z,1516711599.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:39.893Z,1516711599.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:40.257Z,1516711600.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:40.296Z,1516711600.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:40.655Z,1516711600.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:40.690Z,1516711600.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:41.045Z,1516711601.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:41.094Z,1516711601.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:41.442Z,1516711601.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:41.458Z,1516711601.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:41.857Z,1516711601.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:41.892Z,1516711601.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:42.259Z,1516711602.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:42.293Z,1516711602.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:42.655Z,1516711602.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:42.687Z,1516711602.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:43.053Z,1516711603.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:43.092Z,1516711603.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:43.454Z,1516711603.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:43.471Z,1516711603.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:43.863Z,1516711603.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:43.895Z,1516711603.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:44.267Z,1516711604.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:44.295Z,1516711604.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:44.669Z,1516711604.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:44.700Z,1516711604.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:45.054Z,1516711605.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:45.072Z,1516711605.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:45.453Z,1516711605.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:45.500Z,1516711605.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:45.862Z,1516711605.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:45.891Z,1516711605.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:46.259Z,1516711606.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:46.278Z,1516711606.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:46.659Z,1516711606.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:46.676Z,1516711606.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:47.054Z,1516711607.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:47.081Z,1516711607.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:47.448Z,1516711607.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:47.468Z,1516711607.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:47.858Z,1516711607.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:47.878Z,1516711607.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:48.260Z,1516711608.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:48.277Z,1516711608.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:48.658Z,1516711608.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:48.701Z,1516711608.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:49.052Z,1516711609.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:49.070Z,1516711609.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:49.453Z,1516711609.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:49.468Z,1516711609.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:49.858Z,1516711609.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:49.877Z,1516711609.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:50.259Z,1516711610.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:50.274Z,1516711610.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:50.659Z,1516711610.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:50.674Z,1516711610.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:51.057Z,1516711611.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:51.081Z,1516711611.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:51.456Z,1516711611.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:51.475Z,1516711611.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:51.859Z,1516711611.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:51.874Z,1516711611.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:52.259Z,1516711612.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:52.274Z,1516711612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:52.658Z,1516711612.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:52.684Z,1516711612.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:53.058Z,1516711613.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:53.077Z,1516711613.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:53.451Z,1516711613.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:53.466Z,1516711613.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:53.858Z,1516711613.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:53.885Z,1516711613.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:54.267Z,1516711614.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:54.285Z,1516711614.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:54.662Z,1516711614.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:54.681Z,1516711614.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:55.049Z,1516711615.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:55.072Z,1516711615.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:55.448Z,1516711615.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:55.481Z,1516711615.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:55.863Z,1516711615.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:55.889Z,1516711615.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:56.267Z,1516711616.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:56.285Z,1516711616.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:56.661Z,1516711616.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:56.688Z,1516711616.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:57.045Z,1516711617.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:57.081Z,1516711617.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:57.443Z,1516711617.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:57.477Z,1516711617.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:57.862Z,1516711617.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:57.896Z,1516711617.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:58.262Z,1516711618.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:58.287Z,1516711618.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:58.663Z,1516711618.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:58.678Z,1516711618.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:59.045Z,1516711619.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:59.086Z,1516711619.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:59.442Z,1516711619.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:59.478Z,1516711619.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:46:59.863Z,1516711619.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:46:59.878Z,1516711619.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:00.267Z,1516711620.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:00.288Z,1516711620.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:00.660Z,1516711620.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:00.683Z,1516711620.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:01.062Z,1516711621.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:01.077Z,1516711621.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:01.444Z,1516711621.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:01.480Z,1516711621.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:01.869Z,1516711621.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:01.884Z,1516711621.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:02.267Z,1516711622.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:02.282Z,1516711622.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:02.665Z,1516711622.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:02.696Z,1516711622.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:03.046Z,1516711623.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:03.078Z,1516711623.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:03.445Z,1516711623.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:03.477Z,1516711623.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:03.869Z,1516711623.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:03.884Z,1516711623.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:04.256Z,1516711624.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:04.298Z,1516711624.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:04.664Z,1516711624.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:04.689Z,1516711624.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:05.057Z,1516711625.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:05.096Z,1516711625.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:05.446Z,1516711625.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:05.461Z,1516711625.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:05.872Z,1516711625.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:05.901Z,1516711625.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:06.272Z,1516711626.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:06.298Z,1516711626.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:06.656Z,1516711626.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:06.672Z,1516711626.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:07.050Z,1516711627.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:07.074Z,1516711627.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:07.453Z,1516711627.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:07.469Z,1516711627.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:07.855Z,1516711627.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:07.872Z,1516711627.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:08.259Z,1516711628.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:08.281Z,1516711628.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:08.658Z,1516711628.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:08.674Z,1516711628.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:09.053Z,1516711629.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:09.068Z,1516711629.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:09.452Z,1516711629.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:09.473Z,1516711629.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:09.828Z,1516711629.828 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:47:09.828Z,1516711629.828 [NAL9602] Data Fault, FailCount= 2 2018-01-23T12:47:09.828Z,1516711629.828 [NAL9602](ERROR): Data Fault 2018-01-23T12:47:09.855Z,1516711629.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:09.882Z,1516711629.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:09.906Z,1516711629.906 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:47:10.228Z,1516711630.228 [NAL9602](INFO): Powering down 2018-01-23T12:47:10.254Z,1516711630.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:10.289Z,1516711630.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:10.656Z,1516711630.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:10.670Z,1516711630.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:11.056Z,1516711631.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:11.070Z,1516711631.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:11.083Z,1516711631.083 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:47:11.083Z,1516711631.083 [NAL9602] No Fault, FailCount= 2 2018-01-23T12:47:11.441Z,1516711631.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:11.477Z,1516711631.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:11.848Z,1516711631.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:11.873Z,1516711631.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:12.248Z,1516711632.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:12.274Z,1516711632.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:12.641Z,1516711632.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:12.673Z,1516711632.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:13.048Z,1516711633.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:13.073Z,1516711633.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:13.448Z,1516711633.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:13.475Z,1516711633.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:13.841Z,1516711633.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:13.865Z,1516711633.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:14.244Z,1516711634.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:14.294Z,1516711634.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:14.648Z,1516711634.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:14.688Z,1516711634.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:15.041Z,1516711635.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:15.057Z,1516711635.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:15.444Z,1516711635.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:15.464Z,1516711635.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:15.848Z,1516711635.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:15.863Z,1516711635.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:16.245Z,1516711636.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:16.261Z,1516711636.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:16.656Z,1516711636.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:16.670Z,1516711636.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:17.052Z,1516711637.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:17.067Z,1516711637.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:17.449Z,1516711637.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:17.464Z,1516711637.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:20.550Z,1516711640.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:20.565Z,1516711640.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:20.663Z,1516711640.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:20.700Z,1516711640.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:21.034Z,1516711641.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:21.074Z,1516711641.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:21.439Z,1516711641.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:21.454Z,1516711641.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:21.840Z,1516711641.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:21.855Z,1516711641.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:22.244Z,1516711642.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:22.258Z,1516711642.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:22.640Z,1516711642.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:22.655Z,1516711642.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:23.036Z,1516711643.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:23.058Z,1516711643.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:23.444Z,1516711643.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:23.458Z,1516711643.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:23.840Z,1516711643.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:23.855Z,1516711643.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:24.236Z,1516711644.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:24.259Z,1516711644.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:24.640Z,1516711644.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:24.655Z,1516711644.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:25.040Z,1516711645.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:25.055Z,1516711645.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:25.439Z,1516711645.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:25.459Z,1516711645.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:25.841Z,1516711645.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:25.860Z,1516711645.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:26.229Z,1516711646.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:26.253Z,1516711646.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:26.632Z,1516711646.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:26.665Z,1516711646.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:27.036Z,1516711647.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:27.068Z,1516711647.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:27.429Z,1516711647.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:27.444Z,1516711647.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:27.840Z,1516711647.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:27.872Z,1516711647.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:28.232Z,1516711648.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:28.273Z,1516711648.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:28.630Z,1516711648.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:28.644Z,1516711648.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:29.032Z,1516711649.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:29.053Z,1516711649.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:29.440Z,1516711649.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:29.477Z,1516711649.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:29.841Z,1516711649.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:29.856Z,1516711649.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:30.242Z,1516711650.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:30.261Z,1516711650.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:30.642Z,1516711650.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:30.657Z,1516711650.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:31.037Z,1516711651.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:31.062Z,1516711651.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:31.439Z,1516711651.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:31.459Z,1516711651.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:31.842Z,1516711651.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:31.857Z,1516711651.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:32.239Z,1516711652.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:32.254Z,1516711652.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:32.636Z,1516711652.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:32.664Z,1516711652.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:33.038Z,1516711653.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:33.054Z,1516711653.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:33.440Z,1516711653.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:33.455Z,1516711653.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:33.840Z,1516711653.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:33.856Z,1516711653.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:34.240Z,1516711654.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:34.255Z,1516711654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:34.640Z,1516711654.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:34.655Z,1516711654.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:35.038Z,1516711655.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:35.063Z,1516711655.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:35.438Z,1516711655.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:35.458Z,1516711655.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:35.840Z,1516711655.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:35.855Z,1516711655.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:36.236Z,1516711656.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:36.258Z,1516711656.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:36.634Z,1516711656.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:36.665Z,1516711656.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:37.041Z,1516711657.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:37.056Z,1516711657.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:37.438Z,1516711657.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:37.461Z,1516711657.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:37.838Z,1516711657.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:37.865Z,1516711657.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:38.246Z,1516711658.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:38.260Z,1516711658.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:38.646Z,1516711658.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:38.661Z,1516711658.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:39.035Z,1516711659.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:39.062Z,1516711659.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:39.433Z,1516711659.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:39.499Z,1516711659.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:39.846Z,1516711659.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:39.861Z,1516711659.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:40.249Z,1516711660.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:40.269Z,1516711660.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:40.616Z,1516711660.616 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:47:40.634Z,1516711660.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:40.676Z,1516711660.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:41.030Z,1516711661.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:41.067Z,1516711661.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:41.433Z,1516711661.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:41.465Z,1516711661.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:41.837Z,1516711661.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:41.866Z,1516711661.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:42.232Z,1516711662.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:42.270Z,1516711662.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:42.632Z,1516711662.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:42.662Z,1516711662.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:43.032Z,1516711663.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:43.076Z,1516711663.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:43.429Z,1516711663.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:43.458Z,1516711663.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:43.832Z,1516711663.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:43.869Z,1516711663.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:44.236Z,1516711664.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:44.272Z,1516711664.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:44.629Z,1516711664.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:44.654Z,1516711664.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:45.032Z,1516711665.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:45.073Z,1516711665.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:45.432Z,1516711665.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:45.447Z,1516711665.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:45.840Z,1516711665.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:45.855Z,1516711665.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:46.237Z,1516711666.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:46.256Z,1516711666.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:46.639Z,1516711666.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:46.653Z,1516711666.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.037Z,1516711667.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:47.052Z,1516711667.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.054Z,1516711667.054 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.054Z,1516711667.054 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190 2018-01-23T12:47:47.054Z,1516711667.054 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:47:47.066Z,1516711667.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:47:47.443Z,1516711667.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:47.458Z,1516711667.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.470Z,1516711667.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:47:47.483Z,1516711667.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190 2018-01-23T12:47:47.839Z,1516711667.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:47.860Z,1516711667.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.860Z,1516711667.860 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190 2018-01-23T12:47:47.861Z,1516711667.861 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:47:47.862Z,1516711667.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:47.862Z,1516711667.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 190 2018-01-23T12:47:47.863Z,1516711667.863 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:47:47.863Z,1516711667.863 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:47:47.864Z,1516711667.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:47:47.864Z,1516711667.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:47:47.913Z,1516711667.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:47:47.913Z,1516711667.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:47:48.240Z,1516711668.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:48.266Z,1516711668.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:47:48.266Z,1516711668.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190 2018-01-23T12:47:48.266Z,1516711668.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:47:48.266Z,1516711668.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 190 2018-01-23T12:47:48.639Z,1516711668.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:48.653Z,1516711668.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:47:48.654Z,1516711668.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:47:48.654Z,1516711668.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:47:48.655Z,1516711668.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:47:48.655Z,1516711668.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:47:48.655Z,1516711668.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:47:49.041Z,1516711669.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:49.060Z,1516711669.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:47:49.061Z,1516711669.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:49.429Z,1516711669.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:49.457Z,1516711669.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:47:49.458Z,1516711669.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:49.831Z,1516711669.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:49.872Z,1516711669.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:47:49.873Z,1516711669.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:50.236Z,1516711670.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:50.262Z,1516711670.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:47:50.263Z,1516711670.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:50.629Z,1516711670.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:50.661Z,1516711670.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:47:50.662Z,1516711670.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:51.040Z,1516711671.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:51.066Z,1516711671.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:47:51.067Z,1516711671.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:51.443Z,1516711671.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:51.480Z,1516711671.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:47:51.481Z,1516711671.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:51.824Z,1516711671.824 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:47:51.840Z,1516711671.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:51.855Z,1516711671.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:47:51.856Z,1516711671.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:52.237Z,1516711672.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:52.252Z,1516711672.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:47:52.253Z,1516711672.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:52.648Z,1516711672.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:52.662Z,1516711672.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:47:52.676Z,1516711672.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:53.051Z,1516711673.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:53.066Z,1516711673.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:47:53.079Z,1516711673.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:53.444Z,1516711673.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:53.458Z,1516711673.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:47:53.459Z,1516711673.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:53.839Z,1516711673.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:53.854Z,1516711673.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:47:53.855Z,1516711673.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:54.239Z,1516711674.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:54.254Z,1516711674.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:47:54.255Z,1516711674.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:54.640Z,1516711674.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:54.658Z,1516711674.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:47:54.659Z,1516711674.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:55.039Z,1516711675.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:55.054Z,1516711675.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:47:55.055Z,1516711675.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:55.443Z,1516711675.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:55.458Z,1516711675.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:47:55.459Z,1516711675.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:55.847Z,1516711675.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:55.862Z,1516711675.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:47:55.863Z,1516711675.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:56.244Z,1516711676.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:56.258Z,1516711676.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:47:56.259Z,1516711676.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:56.638Z,1516711676.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:56.662Z,1516711676.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:47:56.663Z,1516711676.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:57.040Z,1516711677.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:57.055Z,1516711677.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:47:57.056Z,1516711677.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:57.440Z,1516711677.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:57.454Z,1516711677.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:47:57.455Z,1516711677.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:57.840Z,1516711677.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:57.854Z,1516711677.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:47:57.855Z,1516711677.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:58.238Z,1516711678.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:58.261Z,1516711678.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:47:58.262Z,1516711678.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:58.645Z,1516711678.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:58.660Z,1516711678.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:47:58.661Z,1516711678.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:59.046Z,1516711679.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:59.061Z,1516711679.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:47:59.062Z,1516711679.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:59.446Z,1516711679.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:59.461Z,1516711679.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:47:59.462Z,1516711679.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:47:59.837Z,1516711679.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:47:59.864Z,1516711679.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:47:59.865Z,1516711679.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:00.244Z,1516711680.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:00.258Z,1516711680.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:48:00.260Z,1516711680.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:00.637Z,1516711680.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:00.660Z,1516711680.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:48:00.661Z,1516711680.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:01.032Z,1516711681.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:01.069Z,1516711681.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:48:01.070Z,1516711681.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:01.451Z,1516711681.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:01.466Z,1516711681.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:48:01.467Z,1516711681.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:01.854Z,1516711681.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:01.877Z,1516711681.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:48:01.878Z,1516711681.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:02.252Z,1516711682.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:02.266Z,1516711682.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:48:02.267Z,1516711682.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:02.632Z,1516711682.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:02.669Z,1516711682.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:48:02.670Z,1516711682.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:03.036Z,1516711683.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:03.069Z,1516711683.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:48:03.070Z,1516711683.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:03.432Z,1516711683.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:03.476Z,1516711683.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:48:03.477Z,1516711683.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:03.833Z,1516711683.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:03.860Z,1516711683.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:48:03.861Z,1516711683.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:04.233Z,1516711684.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:04.268Z,1516711684.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:48:04.269Z,1516711684.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:04.643Z,1516711684.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:04.674Z,1516711684.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:48:04.675Z,1516711684.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:05.055Z,1516711685.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:05.081Z,1516711685.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:48:05.082Z,1516711685.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:05.455Z,1516711685.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:05.488Z,1516711685.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:48:05.489Z,1516711685.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:05.836Z,1516711685.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:05.856Z,1516711685.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:48:05.857Z,1516711685.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:06.240Z,1516711686.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:06.255Z,1516711686.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:48:06.256Z,1516711686.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:06.638Z,1516711686.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:06.665Z,1516711686.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:48:06.666Z,1516711686.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:07.040Z,1516711687.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:07.060Z,1516711687.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:48:07.061Z,1516711687.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:07.446Z,1516711687.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:07.461Z,1516711687.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:48:07.462Z,1516711687.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:07.847Z,1516711687.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:07.862Z,1516711687.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:08.246Z,1516711688.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:08.261Z,1516711688.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:08.642Z,1516711688.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:08.658Z,1516711688.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:09.037Z,1516711689.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:09.060Z,1516711689.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:09.437Z,1516711689.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:09.464Z,1516711689.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:09.846Z,1516711689.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:09.861Z,1516711689.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:10.237Z,1516711690.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:10.268Z,1516711690.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:10.655Z,1516711690.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:10.670Z,1516711690.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:11.055Z,1516711691.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:11.070Z,1516711691.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:11.453Z,1516711691.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:11.468Z,1516711691.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:11.832Z,1516711691.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:11.860Z,1516711691.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:12.232Z,1516711692.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:12.266Z,1516711692.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:12.634Z,1516711692.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:12.665Z,1516711692.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:13.032Z,1516711693.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:13.060Z,1516711693.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:13.449Z,1516711693.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:13.469Z,1516711693.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:13.856Z,1516711693.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:13.872Z,1516711693.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:14.251Z,1516711694.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:14.266Z,1516711694.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:14.632Z,1516711694.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:14.674Z,1516711694.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:15.036Z,1516711695.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:15.063Z,1516711695.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:15.432Z,1516711695.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:15.480Z,1516711695.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:15.837Z,1516711695.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:15.868Z,1516711695.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:16.233Z,1516711696.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:16.253Z,1516711696.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:16.651Z,1516711696.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:16.678Z,1516711696.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:17.051Z,1516711697.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:17.078Z,1516711697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:17.451Z,1516711697.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:17.482Z,1516711697.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:17.843Z,1516711697.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:17.865Z,1516711697.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:20.935Z,1516711700.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:20.951Z,1516711700.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:21.059Z,1516711701.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:21.093Z,1516711701.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:21.411Z,1516711701.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:21.437Z,1516711701.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:21.828Z,1516711701.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:21.842Z,1516711701.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:22.207Z,1516711702.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:22.238Z,1516711702.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:22.597Z,1516711702.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:22.617Z,1516711702.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:23.002Z,1516711703.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:23.016Z,1516711703.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:23.401Z,1516711703.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:23.416Z,1516711703.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:23.803Z,1516711703.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:23.818Z,1516711703.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:24.201Z,1516711704.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:24.216Z,1516711704.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:24.604Z,1516711704.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:24.619Z,1516711704.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:25.007Z,1516711705.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:25.022Z,1516711705.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:25.403Z,1516711705.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:25.424Z,1516711705.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:25.801Z,1516711705.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:25.816Z,1516711705.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:26.198Z,1516711706.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:26.221Z,1516711706.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:26.603Z,1516711706.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:26.617Z,1516711706.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:26.997Z,1516711706.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:27.020Z,1516711707.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:27.418Z,1516711707.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:27.433Z,1516711707.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:27.816Z,1516711707.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:27.830Z,1516711707.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:28.208Z,1516711708.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:28.232Z,1516711708.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:28.596Z,1516711708.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:28.623Z,1516711708.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:28.992Z,1516711708.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:29.026Z,1516711709.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:29.390Z,1516711709.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:29.418Z,1516711709.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:29.793Z,1516711709.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:29.825Z,1516711709.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:30.192Z,1516711710.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:30.231Z,1516711710.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:30.603Z,1516711710.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:30.629Z,1516711710.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:31.007Z,1516711711.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:31.041Z,1516711711.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:31.403Z,1516711711.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:31.436Z,1516711711.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:31.797Z,1516711711.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:31.832Z,1516711711.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:32.193Z,1516711712.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:32.208Z,1516711712.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:32.593Z,1516711712.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:32.608Z,1516711712.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:32.998Z,1516711712.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:33.013Z,1516711713.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:33.411Z,1516711713.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:33.436Z,1516711713.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:33.827Z,1516711713.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:33.841Z,1516711713.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:34.207Z,1516711714.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:34.238Z,1516711714.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:34.600Z,1516711714.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:34.621Z,1516711714.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:34.997Z,1516711714.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:35.023Z,1516711715.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:35.394Z,1516711715.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:35.422Z,1516711715.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:35.803Z,1516711715.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:35.818Z,1516711715.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:36.198Z,1516711716.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:36.213Z,1516711716.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:36.606Z,1516711716.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:36.637Z,1516711716.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:37.014Z,1516711717.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:37.029Z,1516711717.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:37.411Z,1516711717.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:37.426Z,1516711717.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:37.796Z,1516711717.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:37.819Z,1516711717.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:38.199Z,1516711718.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:38.218Z,1516711718.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:38.593Z,1516711718.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:38.621Z,1516711718.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:38.990Z,1516711718.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:39.018Z,1516711719.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:39.416Z,1516711719.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:39.431Z,1516711719.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:39.816Z,1516711719.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:39.830Z,1516711719.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:40.206Z,1516711720.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:40.238Z,1516711720.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:40.592Z,1516711720.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:40.618Z,1516711720.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:40.993Z,1516711720.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:41.021Z,1516711721.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:41.391Z,1516711721.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:41.418Z,1516711721.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:41.797Z,1516711721.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:41.824Z,1516711721.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:42.192Z,1516711722.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:42.225Z,1516711722.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:42.607Z,1516711722.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:42.630Z,1516711722.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:43.014Z,1516711723.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:43.037Z,1516711723.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:43.417Z,1516711723.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:43.436Z,1516711723.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:43.797Z,1516711723.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:43.829Z,1516711723.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:44.197Z,1516711724.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:44.229Z,1516711724.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:44.594Z,1516711724.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:44.630Z,1516711724.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:45.027Z,1516711725.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:45.057Z,1516711725.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:45.416Z,1516711725.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:45.431Z,1516711725.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:45.816Z,1516711725.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:45.836Z,1516711725.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:46.204Z,1516711726.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:46.241Z,1516711726.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:46.593Z,1516711726.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:46.621Z,1516711726.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:46.994Z,1516711726.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:47.009Z,1516711727.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:47.403Z,1516711727.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:47.437Z,1516711727.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:47.816Z,1516711727.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:47.842Z,1516711727.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:48.207Z,1516711728.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:48.246Z,1516711728.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:48.597Z,1516711728.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:48.613Z,1516711728.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:48.998Z,1516711728.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:49.013Z,1516711729.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:49.397Z,1516711729.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:49.433Z,1516711729.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:49.804Z,1516711729.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:49.819Z,1516711729.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:50.198Z,1516711730.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:50.218Z,1516711730.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:50.612Z,1516711730.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:50.627Z,1516711730.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:51.012Z,1516711731.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:51.027Z,1516711731.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:51.412Z,1516711731.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:51.426Z,1516711731.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:51.802Z,1516711731.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:51.817Z,1516711731.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:52.196Z,1516711732.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:52.218Z,1516711732.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:52.596Z,1516711732.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:52.619Z,1516711732.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:53.003Z,1516711733.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:53.018Z,1516711733.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:53.406Z,1516711733.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:53.448Z,1516711733.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:53.815Z,1516711733.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:53.830Z,1516711733.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:54.213Z,1516711734.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:54.228Z,1516711734.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:54.600Z,1516711734.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:54.623Z,1516711734.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:55.005Z,1516711735.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:55.032Z,1516711735.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:55.417Z,1516711735.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:55.432Z,1516711735.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:55.819Z,1516711735.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:55.834Z,1516711735.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:56.220Z,1516711736.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:56.234Z,1516711736.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:56.594Z,1516711736.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:56.621Z,1516711736.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:56.991Z,1516711736.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:57.024Z,1516711737.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:57.413Z,1516711737.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:57.429Z,1516711737.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:57.817Z,1516711737.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:57.833Z,1516711737.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:58.206Z,1516711738.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:58.246Z,1516711738.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:58.597Z,1516711738.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:58.625Z,1516711738.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:58.992Z,1516711738.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:59.025Z,1516711739.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:59.408Z,1516711739.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:59.431Z,1516711739.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:48:59.812Z,1516711739.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:48:59.834Z,1516711739.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:00.212Z,1516711740.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:00.228Z,1516711740.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:00.594Z,1516711740.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:00.630Z,1516711740.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:00.992Z,1516711740.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:01.019Z,1516711741.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:01.410Z,1516711741.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:01.440Z,1516711741.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:01.816Z,1516711741.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:01.832Z,1516711741.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:02.215Z,1516711742.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:02.230Z,1516711742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:02.593Z,1516711742.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:02.626Z,1516711742.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:02.990Z,1516711742.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:03.029Z,1516711743.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:03.415Z,1516711743.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:03.430Z,1516711743.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:03.815Z,1516711743.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:03.830Z,1516711743.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:04.211Z,1516711744.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:04.226Z,1516711744.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:04.593Z,1516711744.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:04.624Z,1516711744.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:04.992Z,1516711744.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:05.026Z,1516711745.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:05.407Z,1516711745.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:05.430Z,1516711745.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:05.814Z,1516711745.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:05.837Z,1516711745.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:06.212Z,1516711746.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:06.227Z,1516711746.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:06.593Z,1516711746.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:06.628Z,1516711746.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:06.992Z,1516711746.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:07.025Z,1516711747.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:07.417Z,1516711747.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:07.432Z,1516711747.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:07.819Z,1516711747.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:07.841Z,1516711747.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:08.215Z,1516711748.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:08.230Z,1516711748.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:08.593Z,1516711748.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:08.630Z,1516711748.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:08.990Z,1516711748.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:09.006Z,1516711749.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:09.403Z,1516711749.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:09.429Z,1516711749.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:09.807Z,1516711749.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:09.843Z,1516711749.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:10.203Z,1516711750.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:10.237Z,1516711750.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:10.593Z,1516711750.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:10.608Z,1516711750.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:10.992Z,1516711750.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:11.007Z,1516711751.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:11.407Z,1516711751.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:11.439Z,1516711751.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:11.811Z,1516711751.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:11.842Z,1516711751.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:12.215Z,1516711752.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:12.248Z,1516711752.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:12.603Z,1516711752.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:12.618Z,1516711752.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:13.006Z,1516711753.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:13.021Z,1516711753.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:13.403Z,1516711753.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:13.418Z,1516711753.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:13.815Z,1516711753.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:13.830Z,1516711753.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:14.206Z,1516711754.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:14.221Z,1516711754.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:14.601Z,1516711754.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:14.626Z,1516711754.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:14.997Z,1516711754.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:15.016Z,1516711755.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:15.419Z,1516711755.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:15.434Z,1516711755.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:15.811Z,1516711755.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:15.826Z,1516711755.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:15.829Z,1516711755.829 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:44:15.6Z 2018-01-23T12:49:15.829Z,1516711755.829 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:49:15.829Z,1516711755.829 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:49:16.208Z,1516711756.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:16.235Z,1516711756.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:16.724Z,1516711756.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:16.739Z,1516711756.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:16.994Z,1516711756.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:17.025Z,1516711757.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:20.112Z,1516711760.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:20.127Z,1516711760.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:20.210Z,1516711760.210 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0224.lzma 2018-01-23T12:49:20.255Z,1516711760.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:20.307Z,1516711760.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:20.592Z,1516711760.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:20.621Z,1516711760.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:20.957Z,1516711760.957 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0224.lzma.bak 2018-01-23T12:49:20.957Z,1516711760.957 [DataOverHttps](INFO): SBD MOMSN=7755593 2018-01-23T12:49:20.985Z,1516711760.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:21.024Z,1516711761.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:21.611Z,1516711761.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:21.626Z,1516711761.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:21.781Z,1516711761.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:21.813Z,1516711761.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:24.879Z,1516711764.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:24.896Z,1516711764.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:25.011Z,1516711765.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:25.026Z,1516711765.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:25.396Z,1516711765.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:25.422Z,1516711765.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:25.781Z,1516711765.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:25.796Z,1516711765.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:26.175Z,1516711766.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:26.190Z,1516711766.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:26.585Z,1516711766.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:26.601Z,1516711766.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:29.675Z,1516711769.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:29.697Z,1516711769.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:29.779Z,1516711769.779 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0225.lzma 2018-01-23T12:49:29.800Z,1516711769.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:29.831Z,1516711769.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:30.200Z,1516711770.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:30.235Z,1516711770.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:30.558Z,1516711770.558 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0225.lzma.bak 2018-01-23T12:49:30.558Z,1516711770.558 [DataOverHttps](INFO): SBD MOMSN=7755595 2018-01-23T12:49:30.600Z,1516711770.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:30.615Z,1516711770.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:31.236Z,1516711771.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:31.251Z,1516711771.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:31.254Z,1516711771.254 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:49:31.254Z,1516711771.254 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:49:31.254Z,1516711771.254 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:49:31.394Z,1516711771.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:31.413Z,1516711771.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:34.483Z,1516711774.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:34.498Z,1516711774.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:34.606Z,1516711774.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:34.621Z,1516711774.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:34.964Z,1516711774.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:34.996Z,1516711774.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:35.366Z,1516711775.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:35.398Z,1516711775.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:35.764Z,1516711775.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:35.793Z,1516711775.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:36.145Z,1516711776.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:36.173Z,1516711776.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:36.557Z,1516711776.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:36.572Z,1516711776.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:36.948Z,1516711776.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:36.972Z,1516711776.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:37.352Z,1516711777.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:37.366Z,1516711777.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:37.761Z,1516711777.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:37.776Z,1516711777.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:38.158Z,1516711778.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:38.181Z,1516711778.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:38.561Z,1516711778.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:38.581Z,1516711778.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:38.948Z,1516711778.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:38.981Z,1516711778.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:39.345Z,1516711779.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:39.373Z,1516711779.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:39.752Z,1516711779.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:39.772Z,1516711779.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:40.140Z,1516711780.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:40.177Z,1516711780.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:40.558Z,1516711780.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:40.569Z,1516711780.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x1121 got:0x16956 2018-01-23T12:49:40.606Z,1516711780.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:40.960Z,1516711780.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:40.993Z,1516711780.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:41.368Z,1516711781.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:41.383Z,1516711781.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:41.744Z,1516711781.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:41.775Z,1516711781.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:42.140Z,1516711782.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:42.173Z,1516711782.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:42.547Z,1516711782.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:42.575Z,1516711782.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:42.943Z,1516711782.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:42.977Z,1516711782.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:43.340Z,1516711783.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:43.375Z,1516711783.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:43.756Z,1516711783.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:43.783Z,1516711783.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:44.161Z,1516711784.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:44.183Z,1516711784.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:44.557Z,1516711784.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:44.579Z,1516711784.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:44.940Z,1516711784.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:44.976Z,1516711784.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:45.338Z,1516711785.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:45.364Z,1516711785.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:45.741Z,1516711785.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:45.777Z,1516711785.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:46.147Z,1516711786.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:46.184Z,1516711786.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:46.552Z,1516711786.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:46.597Z,1516711786.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:46.957Z,1516711786.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:46.978Z,1516711786.978 [PNI_TCM](ERROR): CRC does not match. Expected:0x1671 got:0x62997 2018-01-23T12:49:47.051Z,1516711787.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:47.358Z,1516711787.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:47.385Z,1516711787.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:47.746Z,1516711787.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:47.778Z,1516711787.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:48.144Z,1516711788.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:48.189Z,1516711788.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:48.541Z,1516711788.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:48.591Z,1516711788.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:48.942Z,1516711788.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:49.009Z,1516711789.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:49.346Z,1516711789.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:49.379Z,1516711789.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:49.760Z,1516711789.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:49.791Z,1516711789.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:50.156Z,1516711790.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:50.193Z,1516711790.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:50.565Z,1516711790.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:50.584Z,1516711790.584 [PNI_TCM](ERROR): CRC does not match. Expected:0x24845 got:0x55068 2018-01-23T12:49:50.613Z,1516711790.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:50.951Z,1516711790.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:50.966Z,1516711790.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:51.341Z,1516711791.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:51.391Z,1516711791.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:51.754Z,1516711791.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:51.797Z,1516711791.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:52.150Z,1516711792.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:52.172Z,1516711792.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:52.554Z,1516711792.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:52.569Z,1516711792.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:52.964Z,1516711792.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:52.997Z,1516711792.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:53.352Z,1516711793.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:53.370Z,1516711793.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:53.750Z,1516711793.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:53.769Z,1516711793.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:54.153Z,1516711794.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:54.169Z,1516711794.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:54.546Z,1516711794.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:54.590Z,1516711794.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:54.950Z,1516711794.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:54.965Z,1516711794.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:55.350Z,1516711795.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:55.369Z,1516711795.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:55.766Z,1516711795.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:55.797Z,1516711795.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:56.156Z,1516711796.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:56.198Z,1516711796.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:56.567Z,1516711796.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:56.604Z,1516711796.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:56.948Z,1516711796.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:56.974Z,1516711796.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:57.349Z,1516711797.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:57.373Z,1516711797.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:57.745Z,1516711797.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:57.781Z,1516711797.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:58.155Z,1516711798.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:58.170Z,1516711798.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:58.560Z,1516711798.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:58.579Z,1516711798.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:58.960Z,1516711798.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:58.981Z,1516711798.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:59.360Z,1516711799.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:59.403Z,1516711799.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:49:59.753Z,1516711799.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:49:59.779Z,1516711799.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:00.144Z,1516711800.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:00.178Z,1516711800.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:00.555Z,1516711800.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:00.575Z,1516711800.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:00.941Z,1516711800.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:00.984Z,1516711800.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:01.352Z,1516711801.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:01.371Z,1516711801.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:01.764Z,1516711801.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:01.784Z,1516711801.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:02.169Z,1516711802.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:02.189Z,1516711802.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:02.564Z,1516711802.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:02.608Z,1516711802.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:02.941Z,1516711802.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:02.975Z,1516711802.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:03.341Z,1516711803.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:03.368Z,1516711803.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:03.741Z,1516711803.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:03.781Z,1516711803.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:04.145Z,1516711804.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:04.183Z,1516711804.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:04.564Z,1516711804.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:04.580Z,1516711804.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:04.959Z,1516711804.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:04.992Z,1516711804.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:05.356Z,1516711805.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:05.393Z,1516711805.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:05.740Z,1516711805.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:05.781Z,1516711805.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:06.140Z,1516711806.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:06.177Z,1516711806.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:06.549Z,1516711806.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:06.591Z,1516711806.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:06.945Z,1516711806.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:06.961Z,1516711806.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:07.349Z,1516711807.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:07.385Z,1516711807.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:07.764Z,1516711807.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:07.794Z,1516711807.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:08.164Z,1516711808.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:08.193Z,1516711808.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:08.564Z,1516711808.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:08.594Z,1516711808.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:08.955Z,1516711808.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:08.997Z,1516711808.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:09.354Z,1516711809.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:09.369Z,1516711809.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:09.750Z,1516711809.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:09.765Z,1516711809.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:10.148Z,1516711810.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:10.165Z,1516711810.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:10.552Z,1516711810.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:10.593Z,1516711810.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:10.965Z,1516711810.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:11.004Z,1516711811.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:11.351Z,1516711811.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:11.368Z,1516711811.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:11.749Z,1516711811.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:11.764Z,1516711811.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:12.149Z,1516711812.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:12.164Z,1516711812.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:12.554Z,1516711812.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:12.569Z,1516711812.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:12.945Z,1516711812.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:12.977Z,1516711812.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:13.348Z,1516711813.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:13.363Z,1516711813.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:13.755Z,1516711813.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:13.776Z,1516711813.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:14.158Z,1516711814.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:14.173Z,1516711814.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:14.559Z,1516711814.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:14.574Z,1516711814.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:14.950Z,1516711814.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:14.964Z,1516711814.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:15.349Z,1516711815.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:15.364Z,1516711815.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:15.744Z,1516711815.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:15.773Z,1516711815.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:16.148Z,1516711816.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:16.177Z,1516711816.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:16.559Z,1516711816.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:16.574Z,1516711816.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:16.962Z,1516711816.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:16.977Z,1516711816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:17.363Z,1516711817.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:17.377Z,1516711817.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:17.740Z,1516711817.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:17.778Z,1516711817.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:18.140Z,1516711818.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:18.167Z,1516711818.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:18.540Z,1516711818.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:18.575Z,1516711818.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:18.954Z,1516711818.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:18.969Z,1516711818.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:19.340Z,1516711819.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:19.377Z,1516711819.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:19.761Z,1516711819.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:19.780Z,1516711819.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:20.167Z,1516711820.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:20.182Z,1516711820.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:20.560Z,1516711820.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:20.575Z,1516711820.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:20.940Z,1516711820.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:20.975Z,1516711820.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:21.340Z,1516711821.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:21.368Z,1516711821.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:21.741Z,1516711821.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:21.777Z,1516711821.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:22.139Z,1516711822.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:22.169Z,1516711822.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:22.564Z,1516711822.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:22.579Z,1516711822.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:22.964Z,1516711822.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:22.979Z,1516711822.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:23.361Z,1516711823.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:23.376Z,1516711823.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:23.741Z,1516711823.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:23.785Z,1516711823.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:24.139Z,1516711824.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:24.173Z,1516711824.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:24.558Z,1516711824.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:24.585Z,1516711824.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:24.968Z,1516711824.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:24.989Z,1516711824.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:25.360Z,1516711825.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:25.375Z,1516711825.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:25.741Z,1516711825.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:25.775Z,1516711825.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:26.140Z,1516711826.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:26.167Z,1516711826.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:26.560Z,1516711826.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:26.575Z,1516711826.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:26.961Z,1516711826.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:26.988Z,1516711826.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:27.364Z,1516711827.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:27.379Z,1516711827.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:27.741Z,1516711827.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:27.777Z,1516711827.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:28.144Z,1516711828.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:28.173Z,1516711828.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:28.560Z,1516711828.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:28.575Z,1516711828.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:28.964Z,1516711828.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:28.979Z,1516711828.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:29.354Z,1516711829.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:29.388Z,1516711829.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:29.741Z,1516711829.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:29.777Z,1516711829.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:30.144Z,1516711830.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:30.177Z,1516711830.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:30.555Z,1516711830.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:30.580Z,1516711830.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:30.964Z,1516711830.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:30.980Z,1516711830.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:31.355Z,1516711831.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:31.391Z,1516711831.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:31.742Z,1516711831.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:31.778Z,1516711831.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:34.848Z,1516711834.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:34.871Z,1516711834.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:34.991Z,1516711834.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:35.025Z,1516711835.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:35.328Z,1516711835.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:35.343Z,1516711835.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:35.736Z,1516711835.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:35.768Z,1516711835.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:36.116Z,1516711836.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:36.136Z,1516711836.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:36.520Z,1516711836.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:36.535Z,1516711836.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:36.916Z,1516711836.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:36.950Z,1516711836.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:37.325Z,1516711837.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:37.345Z,1516711837.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:37.730Z,1516711837.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:37.745Z,1516711837.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:38.130Z,1516711838.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:38.146Z,1516711838.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:38.530Z,1516711838.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:38.545Z,1516711838.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:38.917Z,1516711838.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:38.938Z,1516711838.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:39.317Z,1516711839.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:39.340Z,1516711839.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:39.716Z,1516711839.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:39.743Z,1516711839.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:40.119Z,1516711840.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:40.139Z,1516711840.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:40.530Z,1516711840.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:40.554Z,1516711840.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:40.938Z,1516711840.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:40.953Z,1516711840.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:41.336Z,1516711841.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:41.351Z,1516711841.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:41.714Z,1516711841.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:41.742Z,1516711841.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:42.112Z,1516711842.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:42.147Z,1516711842.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:42.528Z,1516711842.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:42.552Z,1516711842.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:42.937Z,1516711842.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:42.953Z,1516711842.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:43.328Z,1516711843.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:43.351Z,1516711843.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:43.713Z,1516711843.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:43.744Z,1516711843.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:44.118Z,1516711844.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:44.148Z,1516711844.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:44.517Z,1516711844.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:44.544Z,1516711844.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:44.928Z,1516711844.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:44.960Z,1516711844.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:45.338Z,1516711845.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:45.354Z,1516711845.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:45.728Z,1516711845.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:45.760Z,1516711845.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:46.114Z,1516711846.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:46.149Z,1516711846.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:46.517Z,1516711846.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:46.552Z,1516711846.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:46.914Z,1516711846.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:46.946Z,1516711846.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:47.316Z,1516711847.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:47.356Z,1516711847.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:47.723Z,1516711847.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:47.761Z,1516711847.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.132Z,1516711848.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:48.165Z,1516711848.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.167Z,1516711848.167 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.167Z,1516711848.167 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191 2018-01-23T12:50:48.167Z,1516711848.167 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:50:48.179Z,1516711848.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:50:48.543Z,1516711848.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:48.565Z,1516711848.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.577Z,1516711848.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:50:48.577Z,1516711848.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191 2018-01-23T12:50:48.924Z,1516711848.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:48.963Z,1516711848.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.963Z,1516711848.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191 2018-01-23T12:50:48.963Z,1516711848.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:50:48.965Z,1516711848.965 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:48.965Z,1516711848.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 191 2018-01-23T12:50:48.965Z,1516711848.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:50:48.966Z,1516711848.966 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:50:48.971Z,1516711848.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:50:48.971Z,1516711848.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:50:48.999Z,1516711848.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:50:48.000Z,1516711849.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:50:49.322Z,1516711849.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:49.364Z,1516711849.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:50:49.364Z,1516711849.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191 2018-01-23T12:50:49.365Z,1516711849.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:50:49.365Z,1516711849.365 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 191 2018-01-23T12:50:49.717Z,1516711849.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:49.739Z,1516711849.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:50:49.740Z,1516711849.740 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:50:49.740Z,1516711849.740 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:50:49.740Z,1516711849.740 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:50:49.741Z,1516711849.741 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:50:49.741Z,1516711849.741 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:50:50.122Z,1516711850.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:50.136Z,1516711850.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:50:50.137Z,1516711850.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:50.520Z,1516711850.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:50.534Z,1516711850.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:50:50.536Z,1516711850.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:50.925Z,1516711850.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:50.944Z,1516711850.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:50:50.945Z,1516711850.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:51.327Z,1516711851.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:51.341Z,1516711851.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:50:51.342Z,1516711851.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:51.726Z,1516711851.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:51.740Z,1516711851.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:50:51.741Z,1516711851.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:52.117Z,1516711852.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:52.143Z,1516711852.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:50:52.144Z,1516711852.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:52.521Z,1516711852.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:52.536Z,1516711852.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:50:52.537Z,1516711852.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:52.917Z,1516711852.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:52.936Z,1516711852.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:50:52.937Z,1516711852.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:53.321Z,1516711853.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:53.340Z,1516711853.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:50:53.341Z,1516711853.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:53.730Z,1516711853.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:53.745Z,1516711853.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:50:53.746Z,1516711853.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:54.129Z,1516711854.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:54.149Z,1516711854.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:50:54.150Z,1516711854.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:54.530Z,1516711854.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:54.545Z,1516711854.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:50:54.546Z,1516711854.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:54.919Z,1516711854.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:54.944Z,1516711854.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:50:54.945Z,1516711854.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:55.320Z,1516711855.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:55.338Z,1516711855.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:50:55.339Z,1516711855.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:55.717Z,1516711855.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:55.739Z,1516711855.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:50:55.740Z,1516711855.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:56.122Z,1516711856.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:56.136Z,1516711856.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:50:56.137Z,1516711856.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:56.517Z,1516711856.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:56.538Z,1516711856.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:50:56.539Z,1516711856.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:56.930Z,1516711856.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:56.945Z,1516711856.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:50:56.946Z,1516711856.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:57.335Z,1516711857.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:57.350Z,1516711857.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:50:57.351Z,1516711857.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:57.731Z,1516711857.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:57.745Z,1516711857.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:50:57.746Z,1516711857.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:58.119Z,1516711858.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:58.138Z,1516711858.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:50:58.139Z,1516711858.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:58.521Z,1516711858.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:58.535Z,1516711858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:50:58.536Z,1516711858.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:58.920Z,1516711858.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:58.939Z,1516711858.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:50:58.940Z,1516711858.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:59.320Z,1516711859.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:59.338Z,1516711859.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:50:59.339Z,1516711859.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:50:59.731Z,1516711859.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:50:59.746Z,1516711859.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:50:59.747Z,1516711859.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:00.134Z,1516711860.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:00.153Z,1516711860.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:51:00.154Z,1516711860.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:00.534Z,1516711860.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:00.549Z,1516711860.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:51:00.550Z,1516711860.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:00.921Z,1516711860.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:00.940Z,1516711860.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:51:00.941Z,1516711860.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:01.325Z,1516711861.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:01.340Z,1516711861.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:51:01.341Z,1516711861.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:01.719Z,1516711861.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:01.738Z,1516711861.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:51:01.743Z,1516711861.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:02.113Z,1516711862.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:02.149Z,1516711862.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:51:02.150Z,1516711862.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:02.513Z,1516711862.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:02.539Z,1516711862.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:51:02.540Z,1516711862.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:02.928Z,1516711862.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:02.955Z,1516711862.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:51:02.956Z,1516711862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:03.339Z,1516711863.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:03.354Z,1516711863.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:51:03.355Z,1516711863.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:03.735Z,1516711863.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:03.750Z,1516711863.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:51:03.752Z,1516711863.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:04.113Z,1516711864.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:04.139Z,1516711864.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:51:04.140Z,1516711864.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:04.512Z,1516711864.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:04.547Z,1516711864.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:51:04.548Z,1516711864.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:04.917Z,1516711864.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:04.949Z,1516711864.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:51:04.950Z,1516711864.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:05.312Z,1516711865.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:05.349Z,1516711865.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:51:05.350Z,1516711865.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:05.722Z,1516711865.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:05.750Z,1516711865.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:51:05.751Z,1516711865.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:06.136Z,1516711866.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:06.151Z,1516711866.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:51:06.152Z,1516711866.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:06.523Z,1516711866.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:06.560Z,1516711866.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:51:06.561Z,1516711866.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:06.916Z,1516711866.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:06.931Z,1516711866.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:51:06.932Z,1516711866.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:07.317Z,1516711867.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:07.356Z,1516711867.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:51:07.357Z,1516711867.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:07.718Z,1516711867.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:07.736Z,1516711867.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:51:07.737Z,1516711867.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:08.118Z,1516711868.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:08.132Z,1516711868.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:51:08.133Z,1516711868.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:08.518Z,1516711868.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:08.544Z,1516711868.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:51:08.545Z,1516711868.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:08.935Z,1516711868.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:08.967Z,1516711868.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:09.326Z,1516711869.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:09.341Z,1516711869.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:09.728Z,1516711869.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:09.743Z,1516711869.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:10.117Z,1516711870.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:10.138Z,1516711870.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:10.521Z,1516711870.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:10.535Z,1516711870.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:10.917Z,1516711870.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:10.949Z,1516711870.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:11.326Z,1516711871.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:11.342Z,1516711871.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:11.727Z,1516711871.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:11.742Z,1516711871.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:12.132Z,1516711872.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:12.182Z,1516711872.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:12.526Z,1516711872.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:12.541Z,1516711872.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:12.922Z,1516711872.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:12.937Z,1516711872.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:13.320Z,1516711873.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:13.339Z,1516711873.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:13.720Z,1516711873.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:13.739Z,1516711873.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:14.122Z,1516711874.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:14.137Z,1516711874.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:14.520Z,1516711874.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:14.535Z,1516711874.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:14.926Z,1516711874.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:14.941Z,1516711874.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:15.326Z,1516711875.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:15.341Z,1516711875.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:15.726Z,1516711875.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:15.741Z,1516711875.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:16.120Z,1516711876.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:16.134Z,1516711876.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:16.521Z,1516711876.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:16.536Z,1516711876.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:16.925Z,1516711876.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:16.941Z,1516711876.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:17.317Z,1516711877.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:17.344Z,1516711877.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:17.727Z,1516711877.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:17.742Z,1516711877.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:18.131Z,1516711878.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:18.146Z,1516711878.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:18.526Z,1516711878.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:18.545Z,1516711878.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:18.924Z,1516711878.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:18.939Z,1516711878.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:19.320Z,1516711879.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:19.335Z,1516711879.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:19.724Z,1516711879.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:19.743Z,1516711879.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:20.121Z,1516711880.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:20.148Z,1516711880.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:20.517Z,1516711880.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:20.549Z,1516711880.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:20.927Z,1516711880.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:20.942Z,1516711880.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:21.328Z,1516711881.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:21.349Z,1516711881.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:21.740Z,1516711881.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:21.772Z,1516711881.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:22.120Z,1516711882.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:22.139Z,1516711882.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:22.524Z,1516711882.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:22.539Z,1516711882.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:22.921Z,1516711882.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:22.940Z,1516711882.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:23.327Z,1516711883.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:23.342Z,1516711883.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:23.730Z,1516711883.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:23.753Z,1516711883.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:24.125Z,1516711884.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:24.149Z,1516711884.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:24.530Z,1516711884.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:24.554Z,1516711884.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:24.928Z,1516711884.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:24.942Z,1516711884.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:25.316Z,1516711885.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:25.345Z,1516711885.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:25.720Z,1516711885.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:25.745Z,1516711885.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:26.126Z,1516711886.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:26.143Z,1516711886.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:26.517Z,1516711886.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:26.538Z,1516711886.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:26.930Z,1516711886.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:26.948Z,1516711886.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:27.331Z,1516711887.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:27.350Z,1516711887.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:27.730Z,1516711887.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:27.751Z,1516711887.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:28.119Z,1516711888.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:28.134Z,1516711888.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:28.522Z,1516711888.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:28.544Z,1516711888.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:28.926Z,1516711888.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:28.941Z,1516711888.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:29.328Z,1516711889.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:29.349Z,1516711889.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:29.731Z,1516711889.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:29.746Z,1516711889.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:30.130Z,1516711890.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:30.145Z,1516711890.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:30.530Z,1516711890.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:30.546Z,1516711890.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:30.921Z,1516711890.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:30.940Z,1516711890.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:31.310Z,1516711891.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:31.338Z,1516711891.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:31.713Z,1516711891.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:31.749Z,1516711891.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:32.118Z,1516711892.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:32.144Z,1516711892.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:35.230Z,1516711895.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:35.245Z,1516711895.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:35.356Z,1516711895.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:35.400Z,1516711895.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:35.711Z,1516711895.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:35.742Z,1516711895.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:36.115Z,1516711896.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:36.139Z,1516711896.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:36.498Z,1516711896.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:36.513Z,1516711896.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:36.896Z,1516711896.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:36.911Z,1516711896.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:37.296Z,1516711897.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:37.316Z,1516711897.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:37.699Z,1516711897.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:37.715Z,1516711897.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:38.111Z,1516711898.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:38.142Z,1516711898.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:38.499Z,1516711898.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:38.520Z,1516711898.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:38.898Z,1516711898.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:38.913Z,1516711898.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:39.294Z,1516711899.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:39.317Z,1516711899.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:39.697Z,1516711899.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:39.712Z,1516711899.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:40.094Z,1516711900.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:40.117Z,1516711900.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:40.496Z,1516711900.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:40.517Z,1516711900.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:40.902Z,1516711900.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:40.917Z,1516711900.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:41.304Z,1516711901.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:41.318Z,1516711901.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:41.701Z,1516711901.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:41.721Z,1516711901.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:42.097Z,1516711902.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:42.112Z,1516711902.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:42.496Z,1516711902.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:42.517Z,1516711902.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:42.896Z,1516711902.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:42.914Z,1516711902.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:43.297Z,1516711903.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:43.312Z,1516711903.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:43.701Z,1516711903.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:43.721Z,1516711903.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:44.104Z,1516711904.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:44.118Z,1516711904.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:44.502Z,1516711904.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:44.517Z,1516711904.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:44.896Z,1516711904.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:44.911Z,1516711904.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:45.292Z,1516711905.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:45.321Z,1516711905.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:45.698Z,1516711905.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:45.713Z,1516711905.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:46.096Z,1516711906.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:46.123Z,1516711906.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:46.496Z,1516711906.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:46.517Z,1516711906.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:46.907Z,1516711906.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:46.922Z,1516711906.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:47.306Z,1516711907.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:47.321Z,1516711907.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:47.707Z,1516711907.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:47.722Z,1516711907.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:48.105Z,1516711908.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:48.120Z,1516711908.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:48.501Z,1516711908.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:48.516Z,1516711908.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:48.897Z,1516711908.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:48.912Z,1516711908.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:49.298Z,1516711909.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:49.313Z,1516711909.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:49.706Z,1516711909.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:49.722Z,1516711909.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:50.107Z,1516711910.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:50.122Z,1516711910.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:50.506Z,1516711910.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:50.521Z,1516711910.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:50.897Z,1516711910.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:50.917Z,1516711910.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:51.292Z,1516711911.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:51.323Z,1516711911.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:51.697Z,1516711911.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:51.713Z,1516711911.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:52.096Z,1516711912.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:52.123Z,1516711912.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:52.500Z,1516711912.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:52.519Z,1516711912.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:52.908Z,1516711912.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:52.923Z,1516711912.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:53.311Z,1516711913.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:53.327Z,1516711913.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:53.707Z,1516711913.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:53.722Z,1516711913.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:54.087Z,1516711914.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:54.124Z,1516711914.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:54.489Z,1516711914.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:54.521Z,1516711914.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:54.889Z,1516711914.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:54.916Z,1516711914.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:55.288Z,1516711915.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:55.324Z,1516711915.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:55.707Z,1516711915.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:55.723Z,1516711915.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:56.111Z,1516711916.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:56.126Z,1516711916.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:56.505Z,1516711916.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:56.532Z,1516711916.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:56.889Z,1516711916.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:56.915Z,1516711916.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:57.303Z,1516711917.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:57.324Z,1516711917.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:57.689Z,1516711917.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:57.730Z,1516711917.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:58.090Z,1516711918.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:58.117Z,1516711918.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:58.489Z,1516711918.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:58.526Z,1516711918.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:58.906Z,1516711918.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:58.945Z,1516711918.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:59.300Z,1516711919.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:59.333Z,1516711919.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:51:59.712Z,1516711919.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:51:59.745Z,1516711919.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:00.095Z,1516711920.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:00.110Z,1516711920.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:00.493Z,1516711920.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:00.509Z,1516711920.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:00.895Z,1516711920.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:00.923Z,1516711920.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:01.297Z,1516711921.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:01.313Z,1516711921.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:01.700Z,1516711921.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:01.717Z,1516711921.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:02.104Z,1516711922.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:02.120Z,1516711922.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:02.512Z,1516711922.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:02.548Z,1516711922.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:02.896Z,1516711922.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:02.912Z,1516711922.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:03.296Z,1516711923.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:03.312Z,1516711923.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:03.697Z,1516711923.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:03.717Z,1516711923.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:04.100Z,1516711924.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:04.121Z,1516711924.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:04.496Z,1516711924.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:04.511Z,1516711924.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:04.902Z,1516711924.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:04.925Z,1516711924.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:05.304Z,1516711925.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:05.331Z,1516711925.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:05.707Z,1516711925.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:05.721Z,1516711925.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:06.098Z,1516711926.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:06.120Z,1516711926.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:06.486Z,1516711926.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:06.518Z,1516711926.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:06.901Z,1516711926.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:06.916Z,1516711926.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:07.288Z,1516711927.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:07.325Z,1516711927.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:07.708Z,1516711927.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:07.723Z,1516711927.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:08.111Z,1516711928.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:08.126Z,1516711928.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:08.505Z,1516711928.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:08.531Z,1516711928.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:08.889Z,1516711928.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:08.921Z,1516711928.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:09.292Z,1516711929.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:09.318Z,1516711929.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:09.706Z,1516711929.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:09.729Z,1516711929.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:10.110Z,1516711930.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:10.125Z,1516711930.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:10.507Z,1516711930.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:10.522Z,1516711930.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:10.889Z,1516711930.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:10.917Z,1516711930.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:11.286Z,1516711931.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:11.314Z,1516711931.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:11.708Z,1516711931.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:11.723Z,1516711931.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:12.110Z,1516711932.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:12.125Z,1516711932.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:12.503Z,1516711932.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:12.539Z,1516711932.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:12.889Z,1516711932.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:12.924Z,1516711932.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:13.288Z,1516711933.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:13.326Z,1516711933.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:13.707Z,1516711933.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:13.723Z,1516711933.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:14.110Z,1516711934.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:14.126Z,1516711934.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:14.509Z,1516711934.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:14.524Z,1516711934.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:14.889Z,1516711934.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:14.921Z,1516711934.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:15.288Z,1516711935.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:15.325Z,1516711935.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:15.699Z,1516711935.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:15.729Z,1516711935.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:16.099Z,1516711936.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:16.133Z,1516711936.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:16.499Z,1516711936.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:16.533Z,1516711936.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:16.889Z,1516711936.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:16.926Z,1516711936.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:17.286Z,1516711937.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:17.301Z,1516711937.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:17.699Z,1516711937.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:17.725Z,1516711937.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:18.103Z,1516711938.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:18.137Z,1516711938.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:18.499Z,1516711938.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:18.532Z,1516711938.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:18.889Z,1516711938.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:18.925Z,1516711938.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:19.292Z,1516711939.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:19.307Z,1516711939.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:19.703Z,1516711939.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:19.730Z,1516711939.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:20.103Z,1516711940.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:20.129Z,1516711940.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:20.498Z,1516711940.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:20.534Z,1516711940.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:20.889Z,1516711940.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:20.904Z,1516711940.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:21.300Z,1516711941.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:21.336Z,1516711941.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:21.703Z,1516711941.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:21.738Z,1516711941.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:22.103Z,1516711942.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:22.118Z,1516711942.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:22.503Z,1516711942.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:22.518Z,1516711942.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:22.897Z,1516711942.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:22.912Z,1516711942.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:23.292Z,1516711943.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:23.319Z,1516711943.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:23.703Z,1516711943.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:23.719Z,1516711943.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:24.102Z,1516711944.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:24.116Z,1516711944.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:24.502Z,1516711944.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:24.525Z,1516711944.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:24.900Z,1516711944.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:24.921Z,1516711944.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:25.298Z,1516711945.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:25.313Z,1516711945.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:25.702Z,1516711945.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:25.717Z,1516711945.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:26.115Z,1516711946.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:26.130Z,1516711946.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:26.507Z,1516711946.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:26.522Z,1516711946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:26.897Z,1516711946.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:26.916Z,1516711946.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:27.295Z,1516711947.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:27.315Z,1516711947.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:27.708Z,1516711947.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:27.728Z,1516711947.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:28.107Z,1516711948.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:28.122Z,1516711948.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:28.507Z,1516711948.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:28.522Z,1516711948.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:28.898Z,1516711948.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:28.913Z,1516711948.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:29.292Z,1516711949.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:29.315Z,1516711949.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:29.706Z,1516711949.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:29.722Z,1516711949.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:30.110Z,1516711950.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:30.129Z,1516711950.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:30.506Z,1516711950.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:30.522Z,1516711950.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:30.895Z,1516711950.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:30.915Z,1516711950.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:31.298Z,1516711951.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:31.320Z,1516711951.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:31.706Z,1516711951.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:31.722Z,1516711951.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:32.110Z,1516711952.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:32.125Z,1516711952.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:32.508Z,1516711952.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:32.529Z,1516711952.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:35.594Z,1516711955.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:35.619Z,1516711955.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:35.717Z,1516711955.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:35.737Z,1516711955.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:36.083Z,1516711956.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:36.108Z,1516711956.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:36.487Z,1516711956.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:36.514Z,1516711956.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:36.883Z,1516711956.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:36.906Z,1516711956.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:37.266Z,1516711957.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:37.286Z,1516711957.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:37.671Z,1516711957.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:37.686Z,1516711957.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:38.076Z,1516711958.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:38.091Z,1516711958.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:38.468Z,1516711958.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:38.485Z,1516711958.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:38.874Z,1516711958.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:38.891Z,1516711958.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:39.274Z,1516711959.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:39.290Z,1516711959.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:39.689Z,1516711959.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:39.718Z,1516711959.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:40.070Z,1516711960.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:40.084Z,1516711960.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:40.468Z,1516711960.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:40.483Z,1516711960.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:40.865Z,1516711960.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:40.892Z,1516711960.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:41.277Z,1516711961.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:41.292Z,1516711961.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:41.668Z,1516711961.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:41.683Z,1516711961.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:42.074Z,1516711962.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:42.101Z,1516711962.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:42.483Z,1516711962.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:42.504Z,1516711962.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:42.882Z,1516711962.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:42.905Z,1516711962.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:43.276Z,1516711963.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:43.297Z,1516711963.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:43.669Z,1516711963.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:43.684Z,1516711963.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:44.065Z,1516711964.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:44.088Z,1516711964.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:44.465Z,1516711964.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:44.488Z,1516711964.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:44.882Z,1516711964.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:44.897Z,1516711964.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:45.282Z,1516711965.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:45.298Z,1516711965.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:45.678Z,1516711965.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:45.694Z,1516711965.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:46.071Z,1516711966.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:46.086Z,1516711966.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:46.468Z,1516711966.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:46.488Z,1516711966.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:46.863Z,1516711966.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:46.894Z,1516711966.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:47.270Z,1516711967.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:47.284Z,1516711967.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:47.686Z,1516711967.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:47.701Z,1516711967.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:48.084Z,1516711968.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:48.099Z,1516711968.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:48.482Z,1516711968.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:48.497Z,1516711968.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:48.882Z,1516711968.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:48.901Z,1516711968.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:49.275Z,1516711969.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:49.290Z,1516711969.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:49.681Z,1516711969.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:49.696Z,1516711969.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:50.077Z,1516711970.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:50.093Z,1516711970.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:50.464Z,1516711970.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:50.485Z,1516711970.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:50.880Z,1516711970.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:50.895Z,1516711970.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:51.278Z,1516711971.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:51.293Z,1516711971.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:51.682Z,1516711971.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:51.701Z,1516711971.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:52.073Z,1516711972.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:52.088Z,1516711972.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:52.463Z,1516711972.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:52.494Z,1516711972.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:52.871Z,1516711972.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:52.886Z,1516711972.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:53.274Z,1516711973.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:53.289Z,1516711973.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:53.664Z,1516711973.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:53.686Z,1516711973.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:54.076Z,1516711974.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:54.109Z,1516711974.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:54.487Z,1516711974.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:54.502Z,1516711974.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:54.887Z,1516711974.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:54.902Z,1516711974.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:55.280Z,1516711975.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:55.301Z,1516711975.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:55.662Z,1516711975.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:55.698Z,1516711975.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:56.063Z,1516711976.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:56.089Z,1516711976.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:56.465Z,1516711976.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:56.491Z,1516711976.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:56.882Z,1516711976.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:56.905Z,1516711976.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:57.277Z,1516711977.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:57.299Z,1516711977.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:57.676Z,1516711977.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:57.698Z,1516711977.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:58.063Z,1516711978.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:58.098Z,1516711978.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:58.462Z,1516711978.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:58.489Z,1516711978.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:58.860Z,1516711978.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:58.897Z,1516711978.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:59.263Z,1516711979.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:59.271Z,1516711979.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x15296 got:0x62727 2018-01-23T12:52:59.302Z,1516711979.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:52:59.664Z,1516711979.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:52:59.689Z,1516711979.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:00.087Z,1516711980.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:00.102Z,1516711980.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:00.481Z,1516711980.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:00.495Z,1516711980.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:00.877Z,1516711980.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:00.901Z,1516711980.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:01.271Z,1516711981.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:01.285Z,1516711981.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:01.681Z,1516711981.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:01.696Z,1516711981.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:02.077Z,1516711982.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:02.092Z,1516711982.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:02.481Z,1516711982.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:02.496Z,1516711982.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:02.881Z,1516711982.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:02.896Z,1516711982.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:03.280Z,1516711983.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:03.308Z,1516711983.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:03.680Z,1516711983.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:03.701Z,1516711983.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:04.061Z,1516711984.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:04.093Z,1516711984.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:04.461Z,1516711984.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:04.493Z,1516711984.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:04.871Z,1516711984.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:04.891Z,1516711984.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:05.261Z,1516711985.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:05.295Z,1516711985.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:05.673Z,1516711985.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:05.724Z,1516711985.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:06.077Z,1516711986.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:06.099Z,1516711986.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:06.483Z,1516711986.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:06.501Z,1516711986.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:06.882Z,1516711986.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:06.898Z,1516711986.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:07.260Z,1516711987.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:07.297Z,1516711987.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:07.666Z,1516711987.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:07.694Z,1516711987.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:08.068Z,1516711988.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:08.094Z,1516711988.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:08.460Z,1516711988.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:08.494Z,1516711988.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:08.876Z,1516711988.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:08.902Z,1516711988.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:09.277Z,1516711989.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:09.300Z,1516711989.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:09.675Z,1516711989.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:09.707Z,1516711989.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:10.061Z,1516711990.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:10.096Z,1516711990.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:10.458Z,1516711990.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:10.483Z,1516711990.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:10.861Z,1516711990.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:10.899Z,1516711990.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:11.263Z,1516711991.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:11.278Z,1516711991.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:11.667Z,1516711991.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:11.712Z,1516711991.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:12.071Z,1516711992.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:12.103Z,1516711992.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:12.477Z,1516711992.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:12.505Z,1516711992.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:12.875Z,1516711992.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:12.901Z,1516711992.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:13.260Z,1516711993.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:13.304Z,1516711993.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:13.660Z,1516711993.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:13.711Z,1516711993.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:14.059Z,1516711994.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:14.078Z,1516711994.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:14.475Z,1516711994.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:14.506Z,1516711994.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:14.879Z,1516711994.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:14.913Z,1516711994.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:15.280Z,1516711995.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:15.299Z,1516711995.299 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T12:53:15.325Z,1516711995.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:15.685Z,1516711995.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:15.709Z,1516711995.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:16.068Z,1516711996.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:16.103Z,1516711996.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:16.466Z,1516711996.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:16.506Z,1516711996.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:16.870Z,1516711996.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:16.888Z,1516711996.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:17.272Z,1516711997.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:17.290Z,1516711997.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:17.672Z,1516711997.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:17.687Z,1516711997.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:18.072Z,1516711998.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:18.113Z,1516711998.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:18.475Z,1516711998.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:18.495Z,1516711998.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:18.876Z,1516711998.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:18.894Z,1516711998.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:19.270Z,1516711999.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:19.288Z,1516711999.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:19.669Z,1516711999.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:19.694Z,1516711999.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:20.068Z,1516712000.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:20.090Z,1516712000.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:20.468Z,1516712000.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:20.488Z,1516712000.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:20.892Z,1516712000.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:20.931Z,1516712000.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:21.278Z,1516712001.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:21.320Z,1516712001.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:21.676Z,1516712001.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:21.702Z,1516712001.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:22.067Z,1516712002.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:22.100Z,1516712002.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:22.458Z,1516712002.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:22.495Z,1516712002.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:22.860Z,1516712002.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:22.902Z,1516712002.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:23.274Z,1516712003.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:23.288Z,1516712003.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:23.658Z,1516712003.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:23.696Z,1516712003.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:24.077Z,1516712004.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:24.100Z,1516712004.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:24.483Z,1516712004.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:24.524Z,1516712004.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:24.883Z,1516712004.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:24.902Z,1516712004.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:25.260Z,1516712005.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:25.298Z,1516712005.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:25.687Z,1516712005.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:25.702Z,1516712005.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:26.061Z,1516712006.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:26.105Z,1516712006.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:26.464Z,1516712006.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:26.490Z,1516712006.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:26.878Z,1516712006.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:26.902Z,1516712006.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:27.278Z,1516712007.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:27.304Z,1516712007.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:27.671Z,1516712007.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:27.719Z,1516712007.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:28.064Z,1516712008.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:28.099Z,1516712008.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:28.458Z,1516712008.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:28.473Z,1516712008.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:28.860Z,1516712008.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:28.897Z,1516712008.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:29.261Z,1516712009.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:29.276Z,1516712009.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:29.662Z,1516712009.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:29.681Z,1516712009.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:30.071Z,1516712010.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:30.087Z,1516712010.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:30.475Z,1516712010.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:30.494Z,1516712010.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:30.872Z,1516712010.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:30.886Z,1516712010.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:31.266Z,1516712011.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:31.289Z,1516712011.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:31.669Z,1516712011.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:31.684Z,1516712011.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:32.072Z,1516712012.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:32.096Z,1516712012.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:32.471Z,1516712012.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:32.487Z,1516712012.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:32.875Z,1516712012.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:32.893Z,1516712012.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:35.971Z,1516712015.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:35.987Z,1516712015.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:36.116Z,1516712016.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:36.133Z,1516712016.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:36.441Z,1516712016.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:36.477Z,1516712016.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:36.841Z,1516712016.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:36.879Z,1516712016.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:37.231Z,1516712017.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:37.246Z,1516712017.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:37.633Z,1516712017.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:37.649Z,1516712017.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:38.046Z,1516712018.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:38.084Z,1516712018.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:38.444Z,1516712018.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:38.479Z,1516712018.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:38.851Z,1516712018.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:38.876Z,1516712018.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:39.237Z,1516712019.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:39.252Z,1516712019.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:39.631Z,1516712019.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:39.646Z,1516712019.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:40.041Z,1516712020.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:40.058Z,1516712020.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:40.436Z,1516712020.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:40.451Z,1516712020.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:40.847Z,1516712020.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:40.881Z,1516712020.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:41.247Z,1516712021.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:41.279Z,1516712021.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:41.643Z,1516712021.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:41.666Z,1516712021.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:42.033Z,1516712022.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:42.060Z,1516712022.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:42.440Z,1516712022.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:42.461Z,1516712022.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:42.847Z,1516712022.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:42.862Z,1516712022.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:43.246Z,1516712023.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:43.265Z,1516712023.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:43.647Z,1516712023.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:43.662Z,1516712023.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:44.038Z,1516712024.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:44.053Z,1516712024.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:44.432Z,1516712024.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:44.452Z,1516712024.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:44.846Z,1516712024.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:44.861Z,1516712024.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:45.246Z,1516712025.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:45.268Z,1516712025.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:45.644Z,1516712025.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:45.672Z,1516712025.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:46.041Z,1516712026.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:46.057Z,1516712026.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:46.438Z,1516712026.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:46.460Z,1516712026.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:46.847Z,1516712026.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:46.862Z,1516712026.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:47.250Z,1516712027.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:47.266Z,1516712027.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:47.649Z,1516712027.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:47.676Z,1516712027.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:48.030Z,1516712028.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:48.057Z,1516712028.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:48.433Z,1516712028.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:48.459Z,1516712028.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:48.845Z,1516712028.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:48.867Z,1516712028.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:49.244Z,1516712029.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:49.265Z,1516712029.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:49.267Z,1516712029.267 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:49.267Z,1516712029.267 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192 2018-01-23T12:53:49.267Z,1516712029.267 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:53:49.279Z,1516712029.279 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:53:49.643Z,1516712029.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:49.675Z,1516712029.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:49.687Z,1516712029.687 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:53:49.687Z,1516712029.687 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192 2018-01-23T12:53:50.029Z,1516712030.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:50.065Z,1516712030.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:50.066Z,1516712030.066 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192 2018-01-23T12:53:50.066Z,1516712030.066 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:53:50.067Z,1516712030.067 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:50.068Z,1516712030.068 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 192 2018-01-23T12:53:50.068Z,1516712030.068 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:53:50.068Z,1516712030.068 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:53:50.069Z,1516712030.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:53:50.069Z,1516712030.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:53:50.080Z,1516712030.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:53:50.081Z,1516712030.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:53:50.428Z,1516712030.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:50.476Z,1516712030.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:53:50.476Z,1516712030.476 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192 2018-01-23T12:53:50.477Z,1516712030.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:53:50.477Z,1516712030.477 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 192 2018-01-23T12:53:50.839Z,1516712030.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:50.876Z,1516712030.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:53:50.876Z,1516712030.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:53:50.877Z,1516712030.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:53:50.877Z,1516712030.877 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:53:50.877Z,1516712030.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:53:50.878Z,1516712030.878 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:53:51.243Z,1516712031.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:51.278Z,1516712031.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:53:51.279Z,1516712031.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:51.640Z,1516712031.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:51.666Z,1516712031.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:53:51.671Z,1516712031.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:52.038Z,1516712032.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:52.053Z,1516712032.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:53:52.054Z,1516712032.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:52.434Z,1516712032.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:52.449Z,1516712032.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:53:52.450Z,1516712032.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:52.840Z,1516712032.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:52.860Z,1516712032.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:53:52.861Z,1516712032.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:53.244Z,1516712033.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:53.259Z,1516712033.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:53:53.260Z,1516712033.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:53.642Z,1516712033.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:53.682Z,1516712033.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:53:53.683Z,1516712033.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:54.045Z,1516712034.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:54.059Z,1516712034.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:53:54.060Z,1516712034.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:54.442Z,1516712034.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:54.457Z,1516712034.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:53:54.458Z,1516712034.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:54.848Z,1516712034.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:54.868Z,1516712034.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:53:54.869Z,1516712034.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:55.245Z,1516712035.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:55.272Z,1516712035.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:53:55.273Z,1516712035.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:55.649Z,1516712035.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:55.664Z,1516712035.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:53:55.665Z,1516712035.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:56.029Z,1516712036.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:56.057Z,1516712036.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:53:56.058Z,1516712036.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:56.426Z,1516712036.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:56.465Z,1516712036.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:53:56.466Z,1516712036.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:56.848Z,1516712036.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:56.863Z,1516712036.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:53:56.864Z,1516712036.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:57.251Z,1516712037.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:57.266Z,1516712037.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:53:57.267Z,1516712037.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:57.644Z,1516712037.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:57.664Z,1516712037.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:53:57.665Z,1516712037.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:58.045Z,1516712038.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:58.060Z,1516712038.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:53:58.061Z,1516712038.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:58.429Z,1516712038.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:58.462Z,1516712038.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:53:58.463Z,1516712038.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:58.851Z,1516712038.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:58.866Z,1516712038.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:53:58.867Z,1516712038.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:59.251Z,1516712039.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:59.266Z,1516712039.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:53:59.267Z,1516712039.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:53:59.648Z,1516712039.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:53:59.673Z,1516712039.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:53:59.674Z,1516712039.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:00.029Z,1516712040.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:00.055Z,1516712040.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:54:00.056Z,1516712040.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:00.429Z,1516712040.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:00.464Z,1516712040.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:54:00.465Z,1516712040.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:00.852Z,1516712040.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:00.866Z,1516712040.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:54:00.867Z,1516712040.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:01.251Z,1516712041.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:01.266Z,1516712041.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:54:01.267Z,1516712041.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:01.644Z,1516712041.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:01.665Z,1516712041.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:54:01.666Z,1516712041.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:02.029Z,1516712042.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:02.061Z,1516712042.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:54:02.062Z,1516712042.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:02.426Z,1516712042.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:02.449Z,1516712042.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:54:02.450Z,1516712042.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:02.839Z,1516712042.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:02.872Z,1516712042.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:54:02.873Z,1516712042.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:03.253Z,1516712043.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:03.267Z,1516712043.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:54:03.268Z,1516712043.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:03.640Z,1516712043.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:03.674Z,1516712043.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:54:03.675Z,1516712043.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:04.029Z,1516712044.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:04.056Z,1516712044.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:54:04.057Z,1516712044.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:04.428Z,1516712044.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:04.443Z,1516712044.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:54:04.444Z,1516712044.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:04.840Z,1516712044.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:04.870Z,1516712044.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:54:04.875Z,1516712044.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:05.262Z,1516712045.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:05.276Z,1516712045.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:54:05.277Z,1516712045.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:05.652Z,1516712045.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:05.684Z,1516712045.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:54:05.685Z,1516712045.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:06.030Z,1516712046.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:06.045Z,1516712046.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:54:06.046Z,1516712046.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:06.441Z,1516712046.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:06.456Z,1516712046.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:54:06.457Z,1516712046.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:06.843Z,1516712046.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:06.858Z,1516712046.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:54:06.859Z,1516712046.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:07.272Z,1516712047.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:07.294Z,1516712047.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:54:07.300Z,1516712047.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:07.647Z,1516712047.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:07.669Z,1516712047.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:54:07.670Z,1516712047.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:08.030Z,1516712048.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:08.068Z,1516712048.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:54:08.069Z,1516712048.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:08.427Z,1516712048.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:08.450Z,1516712048.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:54:08.455Z,1516712048.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:08.828Z,1516712048.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:08.864Z,1516712048.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:54:08.865Z,1516712048.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:09.239Z,1516712049.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:09.272Z,1516712049.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:54:09.273Z,1516712049.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:09.640Z,1516712049.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:09.672Z,1516712049.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:54:09.673Z,1516712049.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:10.040Z,1516712050.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:10.073Z,1516712050.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:10.429Z,1516712050.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:10.466Z,1516712050.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:10.833Z,1516712050.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:10.864Z,1516712050.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:11.229Z,1516712051.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:11.257Z,1516712051.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:11.632Z,1516712051.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:11.673Z,1516712051.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:12.039Z,1516712052.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:12.066Z,1516712052.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:12.443Z,1516712052.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:12.469Z,1516712052.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:12.873Z,1516712052.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:12.892Z,1516712052.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:13.230Z,1516712053.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:13.245Z,1516712053.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:13.641Z,1516712053.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:13.672Z,1516712053.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:14.037Z,1516712054.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:14.056Z,1516712054.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:14.432Z,1516712054.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:14.447Z,1516712054.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:14.841Z,1516712054.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:14.856Z,1516712054.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:15.243Z,1516712055.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:15.259Z,1516712055.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:15.640Z,1516712055.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:15.655Z,1516712055.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:16.040Z,1516712056.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:16.055Z,1516712056.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:16.437Z,1516712056.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:16.467Z,1516712056.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:16.842Z,1516712056.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:16.857Z,1516712056.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:17.236Z,1516712057.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:17.257Z,1516712057.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:17.636Z,1516712057.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:17.683Z,1516712057.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:18.047Z,1516712058.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:18.062Z,1516712058.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:18.446Z,1516712058.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:18.461Z,1516712058.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:18.848Z,1516712058.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:18.863Z,1516712058.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:19.232Z,1516712059.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:19.260Z,1516712059.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:19.632Z,1516712059.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:19.655Z,1516712059.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:20.038Z,1516712060.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:20.053Z,1516712060.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:20.433Z,1516712060.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:20.460Z,1516712060.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:20.840Z,1516712060.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:20.855Z,1516712060.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:21.247Z,1516712061.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:21.263Z,1516712061.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:21.651Z,1516712061.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:21.666Z,1516712061.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:22.047Z,1516712062.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:22.062Z,1516712062.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:22.438Z,1516712062.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:22.461Z,1516712062.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:22.832Z,1516712062.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:22.854Z,1516712062.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:23.233Z,1516712063.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:23.256Z,1516712063.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:23.631Z,1516712063.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:23.669Z,1516712063.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:24.050Z,1516712064.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:24.065Z,1516712064.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:24.450Z,1516712064.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:24.465Z,1516712064.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:24.848Z,1516712064.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:24.863Z,1516712064.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:25.229Z,1516712065.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:25.261Z,1516712065.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:25.628Z,1516712065.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:25.661Z,1516712065.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:26.029Z,1516712066.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:26.066Z,1516712066.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:26.441Z,1516712066.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:26.457Z,1516712066.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:26.828Z,1516712066.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:26.861Z,1516712066.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:27.244Z,1516712067.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:27.267Z,1516712067.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:27.655Z,1516712067.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:27.670Z,1516712067.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:28.048Z,1516712068.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:28.063Z,1516712068.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:28.429Z,1516712068.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:28.469Z,1516712068.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:28.833Z,1516712068.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:28.865Z,1516712068.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:29.230Z,1516712069.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:29.257Z,1516712069.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:29.291Z,1516712069.291 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T12:54:29.633Z,1516712069.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:29.668Z,1516712069.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:30.052Z,1516712070.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:30.071Z,1516712070.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:30.457Z,1516712070.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:30.473Z,1516712070.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:30.840Z,1516712070.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:30.877Z,1516712070.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:31.230Z,1516712071.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:31.261Z,1516712071.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:31.630Z,1516712071.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:31.645Z,1516712071.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:31.664Z,1516712071.664 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T12:54:31.665Z,1516712071.665 [Default:CheckIn:C.Wait] Stopped 2018-01-23T12:54:31.665Z,1516712071.665 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T12:54:31.665Z,1516712071.665 [Default:CheckIn:D] Running Loop=1 2018-01-23T12:54:32.029Z,1516712072.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:32.045Z,1516712072.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:32.049Z,1516712072.049 [Default:CheckIn:D] Stopped 2018-01-23T12:54:32.049Z,1516712072.049 [Default:CheckIn:E] Running Loop=1 2018-01-23T12:54:32.436Z,1516712072.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:32.451Z,1516712072.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:32.454Z,1516712072.454 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 576.666471 min 2018-01-23T12:54:32.454Z,1516712072.454 [Default:CheckIn:E] Stopped 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn] Stopped 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn](INFO): Running loop #57 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn] Running Loop=57 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T12:54:32.467Z,1516712072.467 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T12:54:32.838Z,1516712072.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:32.853Z,1516712072.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:33.245Z,1516712073.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:33.260Z,1516712073.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:36.340Z,1516712076.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:36.361Z,1516712076.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:36.485Z,1516712076.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:36.533Z,1516712076.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:36.832Z,1516712076.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:36.847Z,1516712076.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:37.242Z,1516712077.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:37.257Z,1516712077.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:37.628Z,1516712077.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:37.649Z,1516712077.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:38.038Z,1516712078.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:38.057Z,1516712078.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:38.446Z,1516712078.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:38.461Z,1516712078.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:38.843Z,1516712078.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:38.858Z,1516712078.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:39.228Z,1516712079.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:39.251Z,1516712079.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:39.631Z,1516712079.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:39.659Z,1516712079.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:40.022Z,1516712080.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:40.054Z,1516712080.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:40.437Z,1516712080.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:40.453Z,1516712080.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:40.824Z,1516712080.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:40.857Z,1516712080.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:41.240Z,1516712081.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:41.263Z,1516712081.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:41.648Z,1516712081.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:41.663Z,1516712081.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:42.044Z,1516712082.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:42.058Z,1516712082.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:42.424Z,1516712082.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:42.451Z,1516712082.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:42.824Z,1516712082.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:42.857Z,1516712082.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:43.225Z,1516712083.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:43.265Z,1516712083.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:43.623Z,1516712083.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:43.672Z,1516712083.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:44.048Z,1516712084.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:44.063Z,1516712084.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:44.446Z,1516712084.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:44.471Z,1516712084.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:44.847Z,1516712084.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:44.862Z,1516712084.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:45.224Z,1516712085.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:45.257Z,1516712085.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:45.624Z,1516712085.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:45.660Z,1516712085.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:46.022Z,1516712086.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:46.046Z,1516712086.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:46.425Z,1516712086.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:46.456Z,1516712086.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:46.824Z,1516712086.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:46.839Z,1516712086.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:47.235Z,1516712087.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:47.267Z,1516712087.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:47.659Z,1516712087.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:47.681Z,1516712087.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:48.039Z,1516712088.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:48.074Z,1516712088.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:48.425Z,1516712088.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:48.445Z,1516712088.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:48.829Z,1516712088.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:48.844Z,1516712088.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:49.229Z,1516712089.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:49.244Z,1516712089.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:49.626Z,1516712089.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:49.649Z,1516712089.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:50.039Z,1516712090.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:50.054Z,1516712090.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:50.439Z,1516712090.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:50.454Z,1516712090.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:50.835Z,1516712090.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:50.851Z,1516712090.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:51.232Z,1516712091.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:51.247Z,1516712091.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:51.632Z,1516712091.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:51.652Z,1516712091.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:52.034Z,1516712092.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:52.057Z,1516712092.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:52.434Z,1516712092.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:52.449Z,1516712092.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:52.833Z,1516712092.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:52.848Z,1516712092.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:53.236Z,1516712093.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:53.251Z,1516712093.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:53.651Z,1516712093.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:53.682Z,1516712093.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:54.036Z,1516712094.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:54.051Z,1516712094.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:54.432Z,1516712094.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:54.447Z,1516712094.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:54.832Z,1516712094.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:54.847Z,1516712094.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:55.232Z,1516712095.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:55.253Z,1516712095.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:55.628Z,1516712095.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:55.662Z,1516712095.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:56.038Z,1516712096.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:56.061Z,1516712096.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:56.443Z,1516712096.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:56.459Z,1516712096.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:56.842Z,1516712096.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:56.857Z,1516712096.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:57.239Z,1516712097.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:57.255Z,1516712097.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:57.629Z,1516712097.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:57.653Z,1516712097.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:58.029Z,1516712098.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:58.049Z,1516712098.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:58.432Z,1516712098.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:58.451Z,1516712098.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:58.829Z,1516712098.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:58.856Z,1516712098.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:59.242Z,1516712099.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:59.258Z,1516712099.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:54:59.646Z,1516712099.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:54:59.661Z,1516712099.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:00.043Z,1516712100.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:00.058Z,1516712100.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:00.428Z,1516712100.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:00.450Z,1516712100.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:00.828Z,1516712100.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:00.850Z,1516712100.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:01.232Z,1516712101.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:01.254Z,1516712101.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:01.628Z,1516712101.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:01.651Z,1516712101.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:02.042Z,1516712102.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:02.058Z,1516712102.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:02.447Z,1516712102.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:02.462Z,1516712102.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:02.842Z,1516712102.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:02.857Z,1516712102.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:03.228Z,1516712103.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:03.251Z,1516712103.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:03.634Z,1516712103.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:03.649Z,1516712103.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:04.028Z,1516712104.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:04.050Z,1516712104.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:04.431Z,1516712104.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:04.451Z,1516712104.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:04.828Z,1516712104.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:04.859Z,1516712104.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:05.247Z,1516712105.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:05.269Z,1516712105.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:05.647Z,1516712105.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:05.662Z,1516712105.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:06.040Z,1516712106.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:06.071Z,1516712106.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:06.425Z,1516712106.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:06.461Z,1516712106.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:06.825Z,1516712106.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:06.856Z,1516712106.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:07.230Z,1516712107.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:07.261Z,1516712107.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:07.624Z,1516712107.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:07.645Z,1516712107.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:08.044Z,1516712108.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:08.070Z,1516712108.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:08.450Z,1516712108.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:08.477Z,1516712108.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:08.839Z,1516712108.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:08.871Z,1516712108.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:09.232Z,1516712109.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:09.247Z,1516712109.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:09.632Z,1516712109.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:09.647Z,1516712109.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:10.031Z,1516712110.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:10.050Z,1516712110.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:10.433Z,1516712110.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:10.448Z,1516712110.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:10.834Z,1516712110.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:10.849Z,1516712110.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:11.237Z,1516712111.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:11.252Z,1516712111.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:11.641Z,1516712111.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:11.656Z,1516712111.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:12.040Z,1516712112.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:12.056Z,1516712112.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:12.432Z,1516712112.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:12.449Z,1516712112.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:12.832Z,1516712112.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:12.848Z,1516712112.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:13.234Z,1516712113.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:13.249Z,1516712113.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:13.632Z,1516712113.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:13.648Z,1516712113.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:14.037Z,1516712114.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:14.058Z,1516712114.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:14.439Z,1516712114.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:14.454Z,1516712114.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:14.838Z,1516712114.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:14.857Z,1516712114.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:15.236Z,1516712115.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:15.251Z,1516712115.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:15.633Z,1516712115.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:15.648Z,1516712115.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:16.032Z,1516712116.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:16.047Z,1516712116.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:16.428Z,1516712116.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:16.461Z,1516712116.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:16.837Z,1516712116.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:16.852Z,1516712116.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:17.246Z,1516712117.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:17.261Z,1516712117.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:17.646Z,1516712117.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:17.669Z,1516712117.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:18.041Z,1516712118.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:18.072Z,1516712118.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:18.424Z,1516712118.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:18.460Z,1516712118.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:18.824Z,1516712118.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:18.868Z,1516712118.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:19.225Z,1516712119.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:19.261Z,1516712119.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:19.628Z,1516712119.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:19.661Z,1516712119.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:20.035Z,1516712120.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:20.069Z,1516712120.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:20.448Z,1516712120.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:20.463Z,1516712120.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:20.835Z,1516712120.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:20.870Z,1516712120.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:21.224Z,1516712121.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:21.260Z,1516712121.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:21.624Z,1516712121.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:21.662Z,1516712121.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:22.028Z,1516712122.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:22.060Z,1516712122.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:22.425Z,1516712122.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:22.456Z,1516712122.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:22.828Z,1516712122.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:22.867Z,1516712122.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:23.239Z,1516712123.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:23.265Z,1516712123.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:23.639Z,1516712123.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:23.677Z,1516712123.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:24.042Z,1516712124.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:24.072Z,1516712124.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:24.432Z,1516712124.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:24.469Z,1516712124.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:24.836Z,1516712124.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:24.873Z,1516712124.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:25.234Z,1516712125.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:25.248Z,1516712125.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:25.629Z,1516712125.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:25.645Z,1516712125.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:26.039Z,1516712126.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:26.054Z,1516712126.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:26.439Z,1516712126.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:26.454Z,1516712126.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:26.848Z,1516712126.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:26.878Z,1516712126.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:27.232Z,1516712127.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:27.246Z,1516712127.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:27.633Z,1516712127.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:27.648Z,1516712127.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:28.031Z,1516712128.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:28.046Z,1516712128.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:28.432Z,1516712128.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:28.447Z,1516712128.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:28.832Z,1516712128.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:28.852Z,1516712128.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:29.247Z,1516712129.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:29.278Z,1516712129.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:29.640Z,1516712129.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:29.655Z,1516712129.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:30.035Z,1516712130.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:30.056Z,1516712130.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:30.434Z,1516712130.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:30.453Z,1516712130.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:30.834Z,1516712130.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:30.849Z,1516712130.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:31.234Z,1516712131.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:31.249Z,1516712131.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:31.630Z,1516712131.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:31.653Z,1516712131.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:32.047Z,1516712132.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:32.078Z,1516712132.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:32.439Z,1516712132.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:32.454Z,1516712132.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:32.847Z,1516712132.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:32.879Z,1516712132.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:33.231Z,1516712133.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:33.254Z,1516712133.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:33.637Z,1516712133.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:33.652Z,1516712133.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:36.728Z,1516712136.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:36.744Z,1516712136.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:36.856Z,1516712136.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:36.893Z,1516712136.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:37.195Z,1516712137.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:37.210Z,1516712137.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:37.607Z,1516712137.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:37.638Z,1516712137.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:37.996Z,1516712137.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:38.010Z,1516712138.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:38.400Z,1516712138.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:38.421Z,1516712138.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:38.798Z,1516712138.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:38.813Z,1516712138.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:39.189Z,1516712139.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:39.212Z,1516712139.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:39.587Z,1516712139.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:39.610Z,1516712139.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:40.002Z,1516712140.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:40.025Z,1516712140.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:40.410Z,1516712140.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:40.425Z,1516712140.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:40.803Z,1516712140.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:40.818Z,1516712140.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:41.186Z,1516712141.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:41.226Z,1516712141.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:41.585Z,1516712141.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:41.621Z,1516712141.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:42.008Z,1516712142.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:42.022Z,1516712142.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:42.404Z,1516712142.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:42.430Z,1516712142.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:42.804Z,1516712142.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:42.822Z,1516712142.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:43.193Z,1516712143.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:43.221Z,1516712143.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:43.585Z,1516712143.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:43.617Z,1516712143.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:44.008Z,1516712144.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:44.027Z,1516712144.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:44.407Z,1516712144.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:44.427Z,1516712144.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:44.796Z,1516712144.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:44.833Z,1516712144.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:45.191Z,1516712145.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:45.222Z,1516712145.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:45.585Z,1516712145.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:45.633Z,1516712145.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:46.005Z,1516712146.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:46.032Z,1516712146.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:46.409Z,1516712146.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:46.434Z,1516712146.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:46.805Z,1516712146.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:46.831Z,1516712146.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:47.193Z,1516712147.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:47.210Z,1516712147.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:47.589Z,1516712147.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:47.605Z,1516712147.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:47.999Z,1516712147.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:48.024Z,1516712148.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:48.407Z,1516712148.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:48.439Z,1516712148.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:48.807Z,1516712148.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:48.839Z,1516712148.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:49.198Z,1516712149.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:49.221Z,1516712149.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:49.593Z,1516712149.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:49.608Z,1516712149.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:50.002Z,1516712150.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:50.018Z,1516712150.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:50.406Z,1516712150.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:50.425Z,1516712150.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:50.803Z,1516712150.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:50.818Z,1516712150.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:51.189Z,1516712151.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:51.211Z,1516712151.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:51.587Z,1516712151.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:51.619Z,1516712151.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:51.997Z,1516712151.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:52.011Z,1516712152.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:52.403Z,1516712152.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:52.418Z,1516712152.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:52.806Z,1516712152.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:52.821Z,1516712152.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:53.206Z,1516712153.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:53.221Z,1516712153.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:53.597Z,1516712153.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:53.612Z,1516712153.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:53.991Z,1516712153.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:54.011Z,1516712154.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:54.392Z,1516712154.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:54.429Z,1516712154.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:54.797Z,1516712154.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:54.812Z,1516712154.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:55.203Z,1516712155.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:55.225Z,1516712155.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:55.608Z,1516712155.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:55.623Z,1516712155.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:56.003Z,1516712156.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:56.018Z,1516712156.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:56.386Z,1516712156.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:56.417Z,1516712156.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:56.785Z,1516712156.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:56.812Z,1516712156.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:57.185Z,1516712157.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:57.211Z,1516712157.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:57.585Z,1516712157.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:57.617Z,1516712157.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:57.984Z,1516712157.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:58.020Z,1516712158.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:58.407Z,1516712158.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:58.422Z,1516712158.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:58.804Z,1516712158.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:58.831Z,1516712158.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:59.208Z,1516712159.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:59.222Z,1516712159.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:59.585Z,1516712159.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:55:59.620Z,1516712159.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:55:59.984Z,1516712159.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:00.017Z,1516712160.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:00.385Z,1516712160.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:00.421Z,1516712160.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:00.785Z,1516712160.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:00.817Z,1516712160.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:01.199Z,1516712161.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:01.221Z,1516712161.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:01.608Z,1516712161.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:01.622Z,1516712161.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:02.004Z,1516712162.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:02.034Z,1516712162.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:02.392Z,1516712162.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:02.419Z,1516712162.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:02.785Z,1516712162.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:02.818Z,1516712162.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:03.193Z,1516712163.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:03.219Z,1516712163.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:03.586Z,1516712163.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:03.617Z,1516712163.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:03.988Z,1516712163.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:04.022Z,1516712164.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:04.407Z,1516712164.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:04.422Z,1516712164.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:04.815Z,1516712164.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:04.830Z,1516712164.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:05.195Z,1516712165.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:05.225Z,1516712165.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:05.585Z,1516712165.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:05.620Z,1516712165.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:05.985Z,1516712165.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:06.016Z,1516712166.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:06.393Z,1516712166.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:06.426Z,1516712166.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:06.789Z,1516712166.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:06.825Z,1516712166.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:07.212Z,1516712167.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:07.227Z,1516712167.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:07.599Z,1516712167.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:07.635Z,1516712167.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:08.001Z,1516712168.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:08.036Z,1516712168.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:08.399Z,1516712168.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:08.434Z,1516712168.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:08.795Z,1516712168.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:08.846Z,1516712168.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:09.189Z,1516712169.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:09.221Z,1516712169.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:09.611Z,1516712169.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:09.634Z,1516712169.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:09.990Z,1516712169.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:10.032Z,1516712170.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:10.406Z,1516712170.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:10.438Z,1516712170.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:10.825Z,1516712170.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:10.845Z,1516712170.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:11.199Z,1516712171.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:11.214Z,1516712171.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:11.593Z,1516712171.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:11.613Z,1516712171.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:12.001Z,1516712172.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:12.016Z,1516712172.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:12.414Z,1516712172.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:12.459Z,1516712172.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:12.796Z,1516712172.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:12.827Z,1516712172.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:13.210Z,1516712173.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:13.264Z,1516712173.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:13.613Z,1516712173.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:13.663Z,1516712173.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:14.010Z,1516712174.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:14.037Z,1516712174.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:14.400Z,1516712174.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:14.423Z,1516712174.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:14.790Z,1516712174.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:14.862Z,1516712174.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:15.190Z,1516712175.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:15.226Z,1516712175.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:15.591Z,1516712175.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:15.630Z,1516712175.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:15.992Z,1516712175.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:16.065Z,1516712176.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:16.402Z,1516712176.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:16.437Z,1516712176.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:16.853Z,1516712176.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:16.893Z,1516712176.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:17.201Z,1516712177.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:17.240Z,1516712177.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:17.594Z,1516712177.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:17.629Z,1516712177.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:17.999Z,1516712177.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:18.025Z,1516712178.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:18.400Z,1516712178.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:18.427Z,1516712178.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:18.815Z,1516712178.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:18.843Z,1516712178.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:19.201Z,1516712179.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:19.240Z,1516712179.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:19.605Z,1516712179.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:19.692Z,1516712179.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:20.002Z,1516712180.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:20.040Z,1516712180.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:20.389Z,1516712180.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:20.421Z,1516712180.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:20.803Z,1516712180.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:20.856Z,1516712180.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:21.207Z,1516712181.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:21.255Z,1516712181.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:21.604Z,1516712181.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:21.645Z,1516712181.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:22.000Z,1516712182.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:22.056Z,1516712182.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:22.409Z,1516712182.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:22.433Z,1516712182.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:22.815Z,1516712182.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:22.834Z,1516712182.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:23.214Z,1516712183.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:23.262Z,1516712183.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:23.591Z,1516712183.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:23.640Z,1516712183.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:24.021Z,1516712184.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:24.068Z,1516712184.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:24.394Z,1516712184.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:24.464Z,1516712184.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:24.801Z,1516712184.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:24.830Z,1516712184.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:25.211Z,1516712185.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:25.230Z,1516712185.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:25.606Z,1516712185.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:25.654Z,1516712185.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:25.996Z,1516712185.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:26.034Z,1516712186.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:26.387Z,1516712186.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:26.405Z,1516712186.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:26.796Z,1516712186.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:26.837Z,1516712186.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:27.185Z,1516712187.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:27.204Z,1516712187.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:27.592Z,1516712187.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:27.607Z,1516712187.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:27.991Z,1516712187.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:28.006Z,1516712188.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:28.400Z,1516712188.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:28.415Z,1516712188.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:28.802Z,1516712188.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:28.817Z,1516712188.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:29.202Z,1516712189.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:29.217Z,1516712189.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:29.589Z,1516712189.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:29.611Z,1516712189.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:29.997Z,1516712189.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:30.017Z,1516712190.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:30.395Z,1516712190.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:30.412Z,1516712190.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:30.800Z,1516712190.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:30.821Z,1516712190.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:31.203Z,1516712191.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:31.218Z,1516712191.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:31.602Z,1516712191.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:31.617Z,1516712191.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:32.004Z,1516712192.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:32.019Z,1516712192.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:32.389Z,1516712192.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:32.414Z,1516712192.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:32.796Z,1516712192.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:32.811Z,1516712192.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:33.192Z,1516712193.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:33.211Z,1516712193.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:33.588Z,1516712193.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:33.617Z,1516712193.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:33.997Z,1516712193.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:34.004Z,1516712194.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x62515 got:0x34587 2018-01-23T12:56:34.025Z,1516712194.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:37.220Z,1516712197.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:37.250Z,1516712197.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:37.368Z,1516712197.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:37.401Z,1516712197.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:37.704Z,1516712197.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:37.719Z,1516712197.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:38.102Z,1516712198.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:38.116Z,1516712198.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:38.496Z,1516712198.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:38.529Z,1516712198.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:38.904Z,1516712198.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:38.956Z,1516712198.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:39.311Z,1516712199.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:39.326Z,1516712199.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:39.712Z,1516712199.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:39.727Z,1516712199.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:40.110Z,1516712200.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:40.129Z,1516712200.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:40.501Z,1516712200.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:40.516Z,1516712200.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:40.905Z,1516712200.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:40.925Z,1516712200.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:41.297Z,1516712201.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:41.319Z,1516712201.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:41.701Z,1516712201.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:41.716Z,1516712201.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:42.111Z,1516712202.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:42.126Z,1516712202.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:42.510Z,1516712202.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:42.529Z,1516712202.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:42.911Z,1516712202.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:42.932Z,1516712202.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:43.306Z,1516712203.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:43.321Z,1516712203.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:43.700Z,1516712203.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:43.721Z,1516712203.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:44.110Z,1516712204.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:44.132Z,1516712204.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:44.558Z,1516712204.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:44.616Z,1516712204.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:44.908Z,1516712204.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:44.927Z,1516712204.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:45.302Z,1516712205.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:45.317Z,1516712205.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:45.696Z,1516712205.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:45.719Z,1516712205.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:46.114Z,1516712206.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:46.129Z,1516712206.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:46.514Z,1516712206.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:46.529Z,1516712206.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:46.911Z,1516712206.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:46.926Z,1516712206.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:47.300Z,1516712207.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:47.327Z,1516712207.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:47.705Z,1516712207.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:47.720Z,1516712207.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:48.112Z,1516712208.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:48.133Z,1516712208.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:48.518Z,1516712208.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:48.537Z,1516712208.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:48.909Z,1516712208.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:48.936Z,1516712208.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:49.293Z,1516712209.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:49.320Z,1516712209.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:49.692Z,1516712209.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:49.725Z,1516712209.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.112Z,1516712210.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:50.126Z,1516712210.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.129Z,1516712210.129 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.129Z,1516712210.129 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193 2018-01-23T12:56:50.129Z,1516712210.129 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:56:50.140Z,1516712210.140 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:56:50.514Z,1516712210.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:50.529Z,1516712210.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.542Z,1516712210.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:56:50.542Z,1516712210.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193 2018-01-23T12:56:50.911Z,1516712210.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:50.926Z,1516712210.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.926Z,1516712210.926 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193 2018-01-23T12:56:50.926Z,1516712210.926 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:56:50.928Z,1516712210.928 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:50.928Z,1516712210.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 193 2018-01-23T12:56:50.928Z,1516712210.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:56:50.929Z,1516712210.929 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:56:50.930Z,1516712210.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:56:50.930Z,1516712210.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:56:50.941Z,1516712210.941 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:56:50.942Z,1516712210.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:56:51.293Z,1516712211.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:51.339Z,1516712211.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:56:51.339Z,1516712211.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193 2018-01-23T12:56:51.340Z,1516712211.340 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:56:51.340Z,1516712211.340 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 193 2018-01-23T12:56:51.692Z,1516712211.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:51.717Z,1516712211.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:56:51.718Z,1516712211.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:56:51.718Z,1516712211.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:56:51.719Z,1516712211.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:56:51.719Z,1516712211.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:56:51.719Z,1516712211.719 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:56:52.112Z,1516712212.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:52.126Z,1516712212.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:56:52.127Z,1516712212.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:52.516Z,1516712212.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:52.530Z,1516712212.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:56:52.531Z,1516712212.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:52.912Z,1516712212.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:52.926Z,1516712212.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:56:52.927Z,1516712212.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:53.293Z,1516712213.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:53.324Z,1516712213.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:56:53.325Z,1516712213.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:53.692Z,1516712213.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:53.730Z,1516712213.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:56:53.731Z,1516712213.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:54.116Z,1516712214.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:54.130Z,1516712214.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:56:54.131Z,1516712214.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:54.522Z,1516712214.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:54.544Z,1516712214.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:56:54.545Z,1516712214.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:54.902Z,1516712214.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:54.929Z,1516712214.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:56:54.929Z,1516712214.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:55.298Z,1516712215.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:55.324Z,1516712215.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:56:55.325Z,1516712215.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:55.693Z,1516712215.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:55.737Z,1516712215.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:56:55.738Z,1516712215.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:56.107Z,1516712216.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:56.143Z,1516712216.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:56:56.144Z,1516712216.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:56.516Z,1516712216.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:56.542Z,1516712216.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:56:56.543Z,1516712216.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:56.916Z,1516712216.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:56.942Z,1516712216.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:56:56.943Z,1516712216.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:57.297Z,1516712217.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:57.312Z,1516712217.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:56:57.313Z,1516712217.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:57.700Z,1516712217.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:57.717Z,1516712217.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:56:57.718Z,1516712217.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:58.107Z,1516712218.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:58.124Z,1516712218.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:56:58.125Z,1516712218.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:58.507Z,1516712218.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:58.522Z,1516712218.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:56:58.523Z,1516712218.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:58.906Z,1516712218.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:58.921Z,1516712218.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:56:58.922Z,1516712218.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:59.306Z,1516712219.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:59.321Z,1516712219.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T12:56:59.322Z,1516712219.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:56:59.701Z,1516712219.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:56:59.716Z,1516712219.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T12:56:59.717Z,1516712219.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:00.106Z,1516712220.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:00.121Z,1516712220.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T12:57:00.122Z,1516712220.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:00.507Z,1516712220.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:00.522Z,1516712220.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T12:57:00.523Z,1516712220.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:00.906Z,1516712220.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:00.921Z,1516712220.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T12:57:00.922Z,1516712220.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:01.300Z,1516712221.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:01.320Z,1516712221.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T12:57:01.321Z,1516712221.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:01.701Z,1516712221.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:01.716Z,1516712221.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T12:57:01.716Z,1516712221.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:02.101Z,1516712222.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:02.116Z,1516712222.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T12:57:02.116Z,1516712222.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:02.506Z,1516712222.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:02.521Z,1516712222.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T12:57:02.522Z,1516712222.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:02.907Z,1516712222.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:02.922Z,1516712222.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T12:57:02.923Z,1516712222.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:03.306Z,1516712223.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:03.321Z,1516712223.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T12:57:03.322Z,1516712223.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:03.700Z,1516712223.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:03.715Z,1516712223.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T12:57:03.716Z,1516712223.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:04.100Z,1516712224.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:04.115Z,1516712224.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T12:57:04.116Z,1516712224.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:04.502Z,1516712224.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:04.516Z,1516712224.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T12:57:04.517Z,1516712224.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:04.904Z,1516712224.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:04.919Z,1516712224.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T12:57:04.920Z,1516712224.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:05.306Z,1516712225.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:05.321Z,1516712225.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T12:57:05.322Z,1516712225.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:05.719Z,1516712225.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:05.733Z,1516712225.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T12:57:05.760Z,1516712225.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:06.108Z,1516712226.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:06.122Z,1516712226.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T12:57:06.123Z,1516712226.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:06.501Z,1516712226.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:06.515Z,1516712226.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T12:57:06.516Z,1516712226.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:06.902Z,1516712226.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:06.917Z,1516712226.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T12:57:06.918Z,1516712226.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:07.301Z,1516712227.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:07.316Z,1516712227.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T12:57:07.317Z,1516712227.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:07.702Z,1516712227.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:07.717Z,1516712227.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T12:57:07.718Z,1516712227.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:08.103Z,1516712228.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:08.117Z,1516712228.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T12:57:08.118Z,1516712228.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:08.506Z,1516712228.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:08.521Z,1516712228.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T12:57:08.522Z,1516712228.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:08.907Z,1516712228.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:08.922Z,1516712228.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T12:57:08.923Z,1516712228.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:09.308Z,1516712229.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:09.328Z,1516712229.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T12:57:09.329Z,1516712229.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:09.705Z,1516712229.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:09.720Z,1516712229.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T12:57:09.721Z,1516712229.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:10.105Z,1516712230.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:10.120Z,1516712230.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T12:57:10.121Z,1516712230.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:10.504Z,1516712230.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:10.518Z,1516712230.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T12:57:10.519Z,1516712230.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:10.902Z,1516712230.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:10.917Z,1516712230.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T12:57:10.918Z,1516712230.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:11.308Z,1516712231.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:11.323Z,1516712231.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:11.708Z,1516712231.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:11.724Z,1516712231.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:12.106Z,1516712232.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:12.122Z,1516712232.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:12.501Z,1516712232.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:12.516Z,1516712232.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:12.901Z,1516712232.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:12.917Z,1516712232.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:13.296Z,1516712233.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:13.324Z,1516712233.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:13.709Z,1516712233.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:13.725Z,1516712233.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:14.101Z,1516712234.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:14.117Z,1516712234.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:14.510Z,1516712234.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:14.526Z,1516712234.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:14.914Z,1516712234.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:14.930Z,1516712234.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:15.315Z,1516712235.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:15.331Z,1516712235.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:15.696Z,1516712235.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:15.719Z,1516712235.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:16.095Z,1516712236.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:16.128Z,1516712236.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:16.502Z,1516712236.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:16.517Z,1516712236.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:16.904Z,1516712236.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:16.919Z,1516712236.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:17.310Z,1516712237.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:17.326Z,1516712237.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:17.714Z,1516712237.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:17.733Z,1516712237.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:18.111Z,1516712238.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:18.133Z,1516712238.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:18.512Z,1516712238.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:18.533Z,1516712238.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:18.905Z,1516712238.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:18.920Z,1516712238.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:19.290Z,1516712239.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:19.317Z,1516712239.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:19.695Z,1516712239.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:19.728Z,1516712239.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:20.109Z,1516712240.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:20.124Z,1516712240.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:20.510Z,1516712240.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:20.533Z,1516712240.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:20.915Z,1516712240.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:20.930Z,1516712240.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:21.309Z,1516712241.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:21.335Z,1516712241.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:21.701Z,1516712241.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:21.723Z,1516712241.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:22.112Z,1516712242.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:22.133Z,1516712242.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:22.506Z,1516712242.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:22.521Z,1516712242.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:22.904Z,1516712242.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:22.923Z,1516712242.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:23.314Z,1516712243.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:23.330Z,1516712243.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:23.719Z,1516712243.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:23.733Z,1516712243.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:24.108Z,1516712244.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:24.135Z,1516712244.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:24.494Z,1516712244.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:24.521Z,1516712244.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:24.895Z,1516712244.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:24.931Z,1516712244.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:25.294Z,1516712245.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:25.326Z,1516712245.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:25.701Z,1516712245.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:25.728Z,1516712245.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:26.092Z,1516712246.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:26.126Z,1516712246.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:26.508Z,1516712246.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:26.530Z,1516712246.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:26.926Z,1516712246.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:26.945Z,1516712246.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:27.320Z,1516712247.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:27.335Z,1516712247.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:27.692Z,1516712247.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:27.725Z,1516712247.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:28.094Z,1516712248.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:28.129Z,1516712248.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:28.501Z,1516712248.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:28.528Z,1516712248.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:28.900Z,1516712248.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:28.933Z,1516712248.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:29.311Z,1516712249.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:29.326Z,1516712249.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:29.716Z,1516712249.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:29.731Z,1516712249.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:30.111Z,1516712250.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:30.133Z,1516712250.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:30.512Z,1516712250.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:30.533Z,1516712250.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:30.892Z,1516712250.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:30.926Z,1516712250.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:31.292Z,1516712251.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:31.320Z,1516712251.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:31.696Z,1516712251.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:31.726Z,1516712251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:32.100Z,1516712252.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:32.135Z,1516712252.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:32.503Z,1516712252.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:32.529Z,1516712252.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:32.908Z,1516712252.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:32.941Z,1516712252.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:33.303Z,1516712253.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:33.331Z,1516712253.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:33.697Z,1516712253.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:33.733Z,1516712253.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:34.105Z,1516712254.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:34.132Z,1516712254.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:37.202Z,1516712257.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:37.232Z,1516712257.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:37.329Z,1516712257.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:37.354Z,1516712257.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:37.690Z,1516712257.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:37.728Z,1516712257.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:38.097Z,1516712258.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:38.105Z,1516712258.105 [PNI_TCM](ERROR): CRC does not match. Expected:0x17590 got:0x3195 2018-01-23T12:57:38.132Z,1516712258.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:38.493Z,1516712258.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:38.508Z,1516712258.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:38.883Z,1516712258.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:38.898Z,1516712258.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:39.278Z,1516712259.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:39.308Z,1516712259.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:39.680Z,1516712259.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:39.703Z,1516712259.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:40.076Z,1516712260.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:40.109Z,1516712260.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:40.498Z,1516712260.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:40.516Z,1516712260.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:40.891Z,1516712260.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:40.937Z,1516712260.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:41.291Z,1516712261.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:41.309Z,1516712261.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:41.683Z,1516712261.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:41.700Z,1516712261.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:42.076Z,1516712262.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:42.101Z,1516712262.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:42.473Z,1516712262.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:42.517Z,1516712262.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:42.876Z,1516712262.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:42.907Z,1516712262.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:43.288Z,1516712263.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:43.313Z,1516712263.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:43.693Z,1516712263.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:43.715Z,1516712263.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:44.093Z,1516712264.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:44.118Z,1516712264.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:44.470Z,1516712264.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:44.493Z,1516712264.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:44.872Z,1516712264.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:44.912Z,1516712264.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:45.272Z,1516712265.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:45.311Z,1516712265.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:45.674Z,1516712265.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:45.701Z,1516712265.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:46.077Z,1516712266.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:46.108Z,1516712266.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:46.483Z,1516712266.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:46.519Z,1516712266.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:46.893Z,1516712266.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:46.929Z,1516712266.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:47.284Z,1516712267.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:47.316Z,1516712267.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:47.673Z,1516712267.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:47.726Z,1516712267.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:48.071Z,1516712268.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:48.111Z,1516712268.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:48.484Z,1516712268.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:48.517Z,1516712268.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:48.878Z,1516712268.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:48.928Z,1516712268.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:49.288Z,1516712269.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:49.329Z,1516712269.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:49.697Z,1516712269.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:49.722Z,1516712269.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:50.084Z,1516712270.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:50.103Z,1516712270.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:50.477Z,1516712270.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:50.527Z,1516712270.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:50.879Z,1516712270.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:50.895Z,1516712270.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:51.280Z,1516712271.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:51.299Z,1516712271.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:51.680Z,1516712271.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:51.700Z,1516712271.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:52.078Z,1516712272.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:52.102Z,1516712272.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:52.483Z,1516712272.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:52.498Z,1516712272.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:52.856Z,1516712272.856 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T12:57:52.856Z,1516712272.856 [NAL9602] Data Fault, FailCount= 3 2018-01-23T12:57:52.856Z,1516712272.856 [NAL9602](ERROR): Data Fault 2018-01-23T12:57:52.878Z,1516712272.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:52.915Z,1516712272.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:52.940Z,1516712272.940 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T12:57:53.256Z,1516712273.256 [NAL9602](INFO): Powering down 2018-01-23T12:57:53.277Z,1516712273.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:53.315Z,1516712273.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:53.672Z,1516712273.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:53.699Z,1516712273.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:54.072Z,1516712274.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:54.099Z,1516712274.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:54.112Z,1516712274.112 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T12:57:54.113Z,1516712274.113 [NAL9602] No Fault, FailCount= 3 2018-01-23T12:57:54.472Z,1516712274.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:54.510Z,1516712274.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:54.876Z,1516712274.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:54.906Z,1516712274.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:55.269Z,1516712275.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:55.297Z,1516712275.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:55.672Z,1516712275.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:55.705Z,1516712275.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:56.072Z,1516712276.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:56.108Z,1516712276.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:56.470Z,1516712276.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:56.493Z,1516712276.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:56.872Z,1516712276.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:56.908Z,1516712276.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:57.276Z,1516712277.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:57.310Z,1516712277.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:57.676Z,1516712277.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:57.713Z,1516712277.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:58.076Z,1516712278.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:58.090Z,1516712278.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:58.476Z,1516712278.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:58.516Z,1516712278.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:58.876Z,1516712278.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:58.907Z,1516712278.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:59.276Z,1516712279.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:59.290Z,1516712279.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:57:59.680Z,1516712279.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:57:59.695Z,1516712279.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:00.075Z,1516712280.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:00.090Z,1516712280.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:00.477Z,1516712280.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:00.501Z,1516712280.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:00.881Z,1516712280.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:00.895Z,1516712280.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:01.277Z,1516712281.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:01.292Z,1516712281.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:01.684Z,1516712281.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:01.698Z,1516712281.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:02.079Z,1516712282.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:02.100Z,1516712282.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:02.477Z,1516712282.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:02.492Z,1516712282.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:02.880Z,1516712282.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:02.894Z,1516712282.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:03.279Z,1516712283.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:03.294Z,1516712283.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:03.679Z,1516712283.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:03.693Z,1516712283.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:04.079Z,1516712284.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:04.093Z,1516712284.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:04.479Z,1516712284.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:04.493Z,1516712284.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:04.880Z,1516712284.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:04.898Z,1516712284.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:05.276Z,1516712285.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:05.303Z,1516712285.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:05.679Z,1516712285.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:05.693Z,1516712285.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:06.077Z,1516712286.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:06.092Z,1516712286.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:06.479Z,1516712286.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:06.500Z,1516712286.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:06.881Z,1516712286.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:06.895Z,1516712286.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:07.279Z,1516712287.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:07.294Z,1516712287.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:07.676Z,1516712287.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:07.704Z,1516712287.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:08.076Z,1516712288.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:08.108Z,1516712288.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:08.478Z,1516712288.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:08.493Z,1516712288.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:08.879Z,1516712288.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:08.900Z,1516712288.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:09.281Z,1516712289.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:09.296Z,1516712289.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:09.679Z,1516712289.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:09.694Z,1516712289.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:10.085Z,1516712290.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:10.100Z,1516712290.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:10.482Z,1516712290.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:10.501Z,1516712290.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:10.881Z,1516712290.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:10.896Z,1516712290.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:11.281Z,1516712291.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:11.295Z,1516712291.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:11.678Z,1516712291.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:11.712Z,1516712291.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:12.081Z,1516712292.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:12.096Z,1516712292.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:12.479Z,1516712292.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:12.493Z,1516712292.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:12.880Z,1516712292.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:12.895Z,1516712292.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:13.280Z,1516712293.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:13.296Z,1516712293.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:13.679Z,1516712293.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:13.695Z,1516712293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:14.080Z,1516712294.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:14.095Z,1516712294.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:14.480Z,1516712294.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:14.495Z,1516712294.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:14.880Z,1516712294.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:14.894Z,1516712294.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:15.280Z,1516712295.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:15.295Z,1516712295.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:15.680Z,1516712295.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:15.695Z,1516712295.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:16.079Z,1516712296.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:16.094Z,1516712296.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:16.478Z,1516712296.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:16.502Z,1516712296.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:16.880Z,1516712296.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:16.895Z,1516712296.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:17.274Z,1516712297.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:17.310Z,1516712297.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:17.684Z,1516712297.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:17.699Z,1516712297.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:18.080Z,1516712298.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:18.094Z,1516712298.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:18.479Z,1516712298.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:18.494Z,1516712298.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:18.876Z,1516712298.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:18.898Z,1516712298.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:19.280Z,1516712299.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:19.295Z,1516712299.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:19.674Z,1516712299.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:19.710Z,1516712299.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:20.082Z,1516712300.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:20.097Z,1516712300.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:20.480Z,1516712300.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:20.494Z,1516712300.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:20.878Z,1516712300.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:20.905Z,1516712300.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:21.276Z,1516712301.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:21.298Z,1516712301.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:21.680Z,1516712301.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:21.695Z,1516712301.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:22.080Z,1516712302.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:22.094Z,1516712302.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:22.476Z,1516712302.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:22.507Z,1516712302.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:22.872Z,1516712302.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:22.905Z,1516712302.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:23.272Z,1516712303.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:23.307Z,1516712303.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:23.656Z,1516712303.656 [NAL9602](INFO): Powering up NAL9602 2018-01-23T12:58:23.673Z,1516712303.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:23.701Z,1516712303.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:24.072Z,1516712304.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:24.107Z,1516712304.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:24.471Z,1516712304.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:24.507Z,1516712304.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:24.876Z,1516712304.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:24.909Z,1516712304.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:25.274Z,1516712305.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:25.301Z,1516712305.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:25.674Z,1516712305.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:25.712Z,1516712305.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:26.071Z,1516712306.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:26.086Z,1516712306.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:26.473Z,1516712306.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:26.489Z,1516712306.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:26.885Z,1516712306.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:26.924Z,1516712306.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:27.272Z,1516712307.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:27.289Z,1516712307.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:27.685Z,1516712307.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:27.701Z,1516712307.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:28.079Z,1516712308.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:28.095Z,1516712308.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:28.477Z,1516712308.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:28.493Z,1516712308.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:28.880Z,1516712308.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:28.896Z,1516712308.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:29.280Z,1516712309.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:29.294Z,1516712309.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:29.679Z,1516712309.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:29.694Z,1516712309.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:30.079Z,1516712310.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:30.094Z,1516712310.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:30.479Z,1516712310.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:30.493Z,1516712310.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:30.879Z,1516712310.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:30.894Z,1516712310.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:31.279Z,1516712311.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:31.294Z,1516712311.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:31.680Z,1516712311.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:31.694Z,1516712311.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:32.079Z,1516712312.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:32.094Z,1516712312.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:32.479Z,1516712312.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:32.494Z,1516712312.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:32.879Z,1516712312.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:32.893Z,1516712312.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:33.277Z,1516712313.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:33.292Z,1516712313.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:33.681Z,1516712313.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:33.696Z,1516712313.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:34.083Z,1516712314.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:34.098Z,1516712314.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:34.466Z,1516712314.466 [NAL9602](INFO): NAL9602 initialized 2018-01-23T12:58:34.482Z,1516712314.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:34.497Z,1516712314.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:37.578Z,1516712317.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:37.593Z,1516712317.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:37.703Z,1516712317.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:37.733Z,1516712317.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:38.059Z,1516712318.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:38.085Z,1516712318.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:38.449Z,1516712318.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:38.484Z,1516712318.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:38.842Z,1516712318.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:38.857Z,1516712318.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:39.241Z,1516712319.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:39.257Z,1516712319.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:39.659Z,1516712319.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:39.685Z,1516712319.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:40.051Z,1516712320.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:40.066Z,1516712320.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:40.451Z,1516712320.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:40.466Z,1516712320.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:40.844Z,1516712320.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:40.860Z,1516712320.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:41.240Z,1516712321.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:41.267Z,1516712321.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:41.644Z,1516712321.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:41.663Z,1516712321.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:42.041Z,1516712322.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:42.064Z,1516712322.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:42.449Z,1516712322.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:42.469Z,1516712322.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:42.855Z,1516712322.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:42.870Z,1516712322.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:43.251Z,1516712323.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:43.272Z,1516712323.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:43.641Z,1516712323.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:43.661Z,1516712323.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:44.041Z,1516712324.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:44.062Z,1516712324.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:44.446Z,1516712324.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:44.461Z,1516712324.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:44.841Z,1516712324.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:44.863Z,1516712324.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:45.241Z,1516712325.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:45.262Z,1516712325.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:45.652Z,1516712325.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:45.667Z,1516712325.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:46.055Z,1516712326.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:46.070Z,1516712326.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:46.450Z,1516712326.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:46.472Z,1516712326.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:46.850Z,1516712326.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:46.865Z,1516712326.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:47.245Z,1516712327.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:47.260Z,1516712327.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:47.641Z,1516712327.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:47.664Z,1516712327.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:48.042Z,1516712328.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:48.073Z,1516712328.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:48.450Z,1516712328.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:48.481Z,1516712328.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:48.859Z,1516712328.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:48.881Z,1516712328.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:49.259Z,1516712329.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:49.274Z,1516712329.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:49.640Z,1516712329.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:49.671Z,1516712329.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:50.040Z,1516712330.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:50.064Z,1516712330.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:50.440Z,1516712330.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:50.477Z,1516712330.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:50.859Z,1516712330.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:50.882Z,1516712330.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:51.237Z,1516712331.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:51.273Z,1516712331.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:51.660Z,1516712331.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:51.676Z,1516712331.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:52.056Z,1516712332.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:52.086Z,1516712332.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:52.451Z,1516712332.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:52.473Z,1516712332.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:52.837Z,1516712332.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:52.869Z,1516712332.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:53.237Z,1516712333.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:53.272Z,1516712333.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:53.637Z,1516712333.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:53.665Z,1516712333.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:54.041Z,1516712334.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:54.072Z,1516712334.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:54.451Z,1516712334.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:54.478Z,1516712334.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:54.852Z,1516712334.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:54.887Z,1516712334.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:55.247Z,1516712335.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:55.279Z,1516712335.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:55.641Z,1516712335.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:55.661Z,1516712335.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:56.042Z,1516712336.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:56.057Z,1516712336.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:56.441Z,1516712336.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:56.476Z,1516712336.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:56.844Z,1516712336.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:56.859Z,1516712336.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:57.251Z,1516712337.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:57.266Z,1516712337.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:57.648Z,1516712337.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:57.663Z,1516712337.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:58.052Z,1516712338.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:58.073Z,1516712338.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:58.452Z,1516712338.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:58.467Z,1516712338.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:58.844Z,1516712338.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:58.871Z,1516712338.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:59.246Z,1516712339.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:59.261Z,1516712339.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:58:59.646Z,1516712339.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:58:59.669Z,1516712339.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:00.044Z,1516712340.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:00.063Z,1516712340.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:00.482Z,1516712340.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:00.559Z,1516712340.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:00.852Z,1516712340.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:00.889Z,1516712340.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:01.267Z,1516712341.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:01.282Z,1516712341.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:01.649Z,1516712341.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:01.679Z,1516712341.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:02.049Z,1516712342.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:02.081Z,1516712342.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:02.445Z,1516712342.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:02.468Z,1516712342.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:02.842Z,1516712342.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:02.858Z,1516712342.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:03.242Z,1516712343.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:03.257Z,1516712343.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:03.652Z,1516712343.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:03.667Z,1516712343.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:04.052Z,1516712344.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:04.073Z,1516712344.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:04.451Z,1516712344.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:04.473Z,1516712344.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:04.845Z,1516712344.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:04.861Z,1516712344.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:05.242Z,1516712345.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:05.269Z,1516712345.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:05.717Z,1516712345.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:05.756Z,1516712345.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:06.044Z,1516712346.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:06.058Z,1516712346.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:06.456Z,1516712346.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:06.471Z,1516712346.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:06.859Z,1516712346.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:06.875Z,1516712346.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:07.263Z,1516712347.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:07.284Z,1516712347.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:07.637Z,1516712347.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:07.673Z,1516712347.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:08.037Z,1516712348.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:08.069Z,1516712348.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:08.436Z,1516712348.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:08.469Z,1516712348.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:08.837Z,1516712348.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:08.864Z,1516712348.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:09.236Z,1516712349.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:09.269Z,1516712349.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:09.660Z,1516712349.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:09.675Z,1516712349.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:10.062Z,1516712350.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:10.081Z,1516712350.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:10.455Z,1516712350.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:10.470Z,1516712350.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:10.836Z,1516712350.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:10.864Z,1516712350.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:11.248Z,1516712351.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:11.273Z,1516712351.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:11.637Z,1516712351.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:11.673Z,1516712351.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:12.036Z,1516712352.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:12.064Z,1516712352.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:12.455Z,1516712352.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:12.470Z,1516712352.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:12.859Z,1516712352.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:12.874Z,1516712352.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:13.253Z,1516712353.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:13.279Z,1516712353.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:13.648Z,1516712353.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:13.673Z,1516712353.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:14.036Z,1516712354.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:14.069Z,1516712354.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:14.436Z,1516712354.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:14.464Z,1516712354.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:14.837Z,1516712354.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:14.872Z,1516712354.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:15.236Z,1516712355.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:15.269Z,1516712355.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:15.656Z,1516712355.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:15.671Z,1516712355.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:16.059Z,1516712356.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:16.074Z,1516712356.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:16.462Z,1516712356.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:16.477Z,1516712356.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:16.837Z,1516712356.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:16.872Z,1516712356.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:17.237Z,1516712357.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:17.269Z,1516712357.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:17.637Z,1516712357.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:17.669Z,1516712357.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:18.040Z,1516712358.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:18.068Z,1516712358.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:18.459Z,1516712358.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:18.481Z,1516712358.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:18.859Z,1516712358.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:18.874Z,1516712358.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:19.255Z,1516712359.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:19.269Z,1516712359.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:19.636Z,1516712359.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:19.663Z,1516712359.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:20.035Z,1516712360.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:20.069Z,1516712360.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:20.436Z,1516712360.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:20.470Z,1516712360.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:20.841Z,1516712360.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:20.868Z,1516712360.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:21.235Z,1516712361.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:21.269Z,1516712361.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:21.653Z,1516712361.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:21.675Z,1516712361.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:22.060Z,1516712362.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:22.074Z,1516712362.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:22.452Z,1516712362.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:22.473Z,1516712362.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:22.836Z,1516712362.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:22.865Z,1516712362.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:23.237Z,1516712363.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:23.262Z,1516712363.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:23.637Z,1516712363.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:23.669Z,1516712363.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:24.036Z,1516712364.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:24.072Z,1516712364.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:24.456Z,1516712364.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:24.471Z,1516712364.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:24.856Z,1516712364.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:24.879Z,1516712364.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:25.246Z,1516712365.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:25.272Z,1516712365.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:25.637Z,1516712365.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:25.672Z,1516712365.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:26.044Z,1516712366.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:26.071Z,1516712366.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:26.437Z,1516712366.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:26.470Z,1516712366.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:26.838Z,1516712366.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:26.873Z,1516712366.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:27.237Z,1516712367.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:27.273Z,1516712367.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:27.661Z,1516712367.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:27.676Z,1516712367.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:28.064Z,1516712368.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:28.079Z,1516712368.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:28.448Z,1516712368.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:28.481Z,1516712368.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:28.836Z,1516712368.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:28.882Z,1516712368.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:29.240Z,1516712369.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:29.277Z,1516712369.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:29.637Z,1516712369.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:29.653Z,1516712369.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:30.036Z,1516712370.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:30.051Z,1516712370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:30.460Z,1516712370.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:30.487Z,1516712370.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:30.873Z,1516712370.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:30.888Z,1516712370.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:31.250Z,1516712371.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:31.289Z,1516712371.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:31.646Z,1516712371.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:31.661Z,1516712371.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:32.043Z,1516712372.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:32.058Z,1516712372.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:32.441Z,1516712372.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:32.467Z,1516712372.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:32.483Z,1516712372.483 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T12:54:32.5Z 2018-01-23T12:59:32.483Z,1516712372.483 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T12:59:32.483Z,1516712372.483 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T12:59:32.842Z,1516712372.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:32.869Z,1516712372.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:33.369Z,1516712373.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:33.400Z,1516712373.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:33.653Z,1516712373.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:33.673Z,1516712373.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:36.800Z,1516712376.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:36.815Z,1516712376.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:36.891Z,1516712376.891 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0228.lzma 2018-01-23T12:59:36.923Z,1516712376.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:36.958Z,1516712376.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:37.261Z,1516712377.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:37.277Z,1516712377.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:37.645Z,1516712377.645 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0228.lzma.bak 2018-01-23T12:59:37.645Z,1516712377.645 [DataOverHttps](INFO): SBD MOMSN=7755605 2018-01-23T12:59:37.668Z,1516712377.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:37.684Z,1516712377.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:38.304Z,1516712378.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:38.325Z,1516712378.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:38.480Z,1516712378.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:38.505Z,1516712378.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:41.579Z,1516712381.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:41.612Z,1516712381.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:41.710Z,1516712381.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:41.752Z,1516712381.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:42.063Z,1516712382.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:42.082Z,1516712382.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:42.471Z,1516712382.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:42.486Z,1516712382.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:42.866Z,1516712382.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:42.888Z,1516712382.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:43.264Z,1516712383.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:43.280Z,1516712383.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:46.376Z,1516712386.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:46.429Z,1516712386.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:46.511Z,1516712386.511 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0229.lzma 2018-01-23T12:59:46.543Z,1516712386.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:46.593Z,1516712386.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:46.939Z,1516712386.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:46.970Z,1516712386.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:47.301Z,1516712387.301 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0229.lzma.bak 2018-01-23T12:59:47.302Z,1516712387.302 [DataOverHttps](INFO): SBD MOMSN=7755607 2018-01-23T12:59:47.340Z,1516712387.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:47.360Z,1516712387.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:47.972Z,1516712387.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:47.993Z,1516712387.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:47.996Z,1516712387.996 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T12:59:47.996Z,1516712387.996 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T12:59:47.996Z,1516712387.996 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T12:59:48.125Z,1516712388.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:48.175Z,1516712388.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.242Z,1516712391.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:51.257Z,1516712391.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.259Z,1516712391.259 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.260Z,1516712391.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194 2018-01-23T12:59:51.260Z,1516712391.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T12:59:51.312Z,1516712391.312 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T12:59:51.382Z,1516712391.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:51.429Z,1516712391.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.441Z,1516712391.441 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T12:59:51.441Z,1516712391.441 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194 2018-01-23T12:59:51.776Z,1516712391.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:51.797Z,1516712391.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.797Z,1516712391.797 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194 2018-01-23T12:59:51.797Z,1516712391.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T12:59:51.799Z,1516712391.799 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:51.799Z,1516712391.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 194 2018-01-23T12:59:51.799Z,1516712391.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T12:59:51.800Z,1516712391.800 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T12:59:51.800Z,1516712391.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:59:51.801Z,1516712391.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:59:51.812Z,1516712391.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T12:59:51.812Z,1516712391.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T12:59:52.154Z,1516712392.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:52.212Z,1516712392.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T12:59:52.212Z,1516712392.212 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194 2018-01-23T12:59:52.213Z,1516712392.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T12:59:52.213Z,1516712392.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 194 2018-01-23T12:59:52.550Z,1516712392.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:52.565Z,1516712392.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T12:59:52.565Z,1516712392.565 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:59:52.566Z,1516712392.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:59:52.566Z,1516712392.566 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T12:59:52.567Z,1516712392.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T12:59:52.567Z,1516712392.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T12:59:52.962Z,1516712392.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:52.994Z,1516712392.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T12:59:52.999Z,1516712392.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:53.358Z,1516712393.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:53.373Z,1516712393.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T12:59:53.374Z,1516712393.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:53.764Z,1516712393.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:53.780Z,1516712393.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T12:59:53.781Z,1516712393.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:54.172Z,1516712394.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:54.208Z,1516712394.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T12:59:54.209Z,1516712394.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:54.564Z,1516712394.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:54.579Z,1516712394.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T12:59:54.580Z,1516712394.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:54.956Z,1516712394.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:54.972Z,1516712394.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T12:59:54.973Z,1516712394.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:55.357Z,1516712395.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:55.371Z,1516712395.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T12:59:55.372Z,1516712395.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:55.752Z,1516712395.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:55.788Z,1516712395.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T12:59:55.789Z,1516712395.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:56.156Z,1516712396.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:56.171Z,1516712396.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T12:59:56.172Z,1516712396.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:56.562Z,1516712396.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:56.577Z,1516712396.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T12:59:56.578Z,1516712396.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:56.963Z,1516712396.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:56.984Z,1516712396.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T12:59:56.985Z,1516712396.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:57.368Z,1516712397.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:57.382Z,1516712397.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T12:59:57.383Z,1516712397.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:57.756Z,1516712397.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:57.770Z,1516712397.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T12:59:57.772Z,1516712397.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:58.158Z,1516712398.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:58.172Z,1516712398.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T12:59:58.173Z,1516712398.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:58.557Z,1516712398.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:58.576Z,1516712398.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T12:59:58.577Z,1516712398.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:58.956Z,1516712398.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:58.976Z,1516712398.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T12:59:58.977Z,1516712398.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:59.358Z,1516712399.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:59.376Z,1516712399.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T12:59:59.377Z,1516712399.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T12:59:59.767Z,1516712399.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T12:59:59.788Z,1516712399.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T12:59:59.789Z,1516712399.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:00.171Z,1516712400.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:00.185Z,1516712400.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:00:00.186Z,1516712400.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:00.568Z,1516712400.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:00.582Z,1516712400.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:00:00.583Z,1516712400.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:00.952Z,1516712400.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:00.974Z,1516712400.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:00:00.975Z,1516712400.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:01.368Z,1516712401.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:01.382Z,1516712401.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:00:01.384Z,1516712401.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:01.759Z,1516712401.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:01.773Z,1516712401.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:00:01.774Z,1516712401.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:02.152Z,1516712402.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:02.174Z,1516712402.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:00:02.175Z,1516712402.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:02.568Z,1516712402.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:02.582Z,1516712402.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:00:02.583Z,1516712402.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:02.971Z,1516712402.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:02.985Z,1516712402.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:00:02.986Z,1516712402.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:03.367Z,1516712403.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:03.382Z,1516712403.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:00:03.383Z,1516712403.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:03.752Z,1516712403.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:03.779Z,1516712403.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:00:03.780Z,1516712403.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:04.163Z,1516712404.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:04.177Z,1516712404.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:00:04.178Z,1516712404.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:04.549Z,1516712404.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:04.581Z,1516712404.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:00:04.582Z,1516712404.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:04.950Z,1516712404.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:04.981Z,1516712404.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:00:04.982Z,1516712404.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:05.348Z,1516712405.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:05.382Z,1516712405.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:00:05.383Z,1516712405.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:05.768Z,1516712405.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:05.788Z,1516712405.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:00:05.789Z,1516712405.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:06.172Z,1516712406.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:06.186Z,1516712406.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:00:06.187Z,1516712406.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:06.563Z,1516712406.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:06.598Z,1516712406.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:00:06.599Z,1516712406.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:06.953Z,1516712406.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:06.979Z,1516712406.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:00:06.980Z,1516712406.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:07.369Z,1516712407.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:07.384Z,1516712407.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:00:07.385Z,1516712407.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:07.750Z,1516712407.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:07.786Z,1516712407.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:00:07.787Z,1516712407.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:08.153Z,1516712408.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:08.179Z,1516712408.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:00:08.180Z,1516712408.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:08.568Z,1516712408.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:08.588Z,1516712408.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:00:08.589Z,1516712408.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:08.973Z,1516712408.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:08.987Z,1516712408.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:00:08.988Z,1516712408.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:09.368Z,1516712409.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:09.383Z,1516712409.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:00:09.384Z,1516712409.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:09.749Z,1516712409.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:09.784Z,1516712409.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:00:09.785Z,1516712409.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:10.149Z,1516712410.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:10.188Z,1516712410.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:00:10.189Z,1516712410.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:10.549Z,1516712410.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:10.575Z,1516712410.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:00:10.576Z,1516712410.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:10.966Z,1516712410.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:10.981Z,1516712410.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:00:10.981Z,1516712410.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:11.349Z,1516712411.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:11.382Z,1516712411.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:00:11.383Z,1516712411.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:11.769Z,1516712411.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:11.783Z,1516712411.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:00:11.784Z,1516712411.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:12.166Z,1516712412.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:12.193Z,1516712412.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:12.560Z,1516712412.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:12.593Z,1516712412.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:12.953Z,1516712412.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:12.988Z,1516712412.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:13.353Z,1516712413.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:13.384Z,1516712413.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:13.750Z,1516712413.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:13.764Z,1516712413.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:14.157Z,1516712414.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:14.193Z,1516712414.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:14.567Z,1516712414.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:14.598Z,1516712414.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:14.971Z,1516712414.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:15.005Z,1516712415.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:15.371Z,1516712415.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:15.402Z,1516712415.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:15.754Z,1516712415.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:15.777Z,1516712415.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:16.157Z,1516712416.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:16.172Z,1516712416.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:16.563Z,1516712416.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:16.578Z,1516712416.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:16.958Z,1516712416.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:16.973Z,1516712416.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:17.362Z,1516712417.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:17.377Z,1516712417.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:17.761Z,1516712417.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:17.781Z,1516712417.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:18.164Z,1516712418.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:18.185Z,1516712418.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:18.564Z,1516712418.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:18.579Z,1516712418.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:18.957Z,1516712418.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:18.976Z,1516712418.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:19.352Z,1516712419.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:19.385Z,1516712419.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:19.764Z,1516712419.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:19.778Z,1516712419.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:20.157Z,1516712420.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:20.172Z,1516712420.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:20.567Z,1516712420.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:20.583Z,1516712420.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:20.967Z,1516712420.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:20.982Z,1516712420.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:21.365Z,1516712421.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:21.392Z,1516712421.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:21.760Z,1516712421.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:21.779Z,1516712421.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:22.158Z,1516712422.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:22.173Z,1516712422.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:22.552Z,1516712422.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:22.576Z,1516712422.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:22.951Z,1516712422.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:22.993Z,1516712422.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:23.361Z,1516712423.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:23.376Z,1516712423.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:23.768Z,1516712423.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:23.783Z,1516712423.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:24.171Z,1516712424.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:24.186Z,1516712424.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:24.568Z,1516712424.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:24.583Z,1516712424.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:24.952Z,1516712424.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:24.983Z,1516712424.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:25.352Z,1516712425.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:25.374Z,1516712425.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:25.750Z,1516712425.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:25.795Z,1516712425.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:26.162Z,1516712426.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:26.177Z,1516712426.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:26.564Z,1516712426.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:26.589Z,1516712426.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:26.974Z,1516712426.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:26.989Z,1516712426.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:27.367Z,1516712427.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:27.382Z,1516712427.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:27.751Z,1516712427.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:27.766Z,1516712427.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:28.155Z,1516712428.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:28.275Z,1516712428.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:28.546Z,1516712428.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:28.562Z,1516712428.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:28.952Z,1516712428.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:28.973Z,1516712428.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:29.352Z,1516712429.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:29.368Z,1516712429.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:29.768Z,1516712429.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:29.783Z,1516712429.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:30.164Z,1516712430.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:30.185Z,1516712430.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:30.564Z,1516712430.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:30.579Z,1516712430.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:30.949Z,1516712430.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:30.965Z,1516712430.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:31.352Z,1516712431.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:31.367Z,1516712431.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:31.752Z,1516712431.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:31.767Z,1516712431.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:32.150Z,1516712432.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:32.174Z,1516712432.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:32.564Z,1516712432.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:32.590Z,1516712432.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:32.972Z,1516712432.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:32.995Z,1516712432.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:33.360Z,1516712433.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:33.397Z,1516712433.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:33.758Z,1516712433.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:33.774Z,1516712433.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:34.155Z,1516712434.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:34.170Z,1516712434.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:34.552Z,1516712434.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:34.579Z,1516712434.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:34.953Z,1516712434.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:34.976Z,1516712434.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:35.358Z,1516712435.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:35.373Z,1516712435.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:35.762Z,1516712435.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:35.777Z,1516712435.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:36.164Z,1516712436.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:36.185Z,1516712436.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:36.564Z,1516712436.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:36.578Z,1516712436.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:36.957Z,1516712436.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:36.972Z,1516712436.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:37.366Z,1516712437.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:37.381Z,1516712437.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:37.759Z,1516712437.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:37.774Z,1516712437.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:38.154Z,1516712438.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:38.173Z,1516712438.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:38.562Z,1516712438.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:38.577Z,1516712438.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:38.963Z,1516712438.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:38.984Z,1516712438.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:39.362Z,1516712439.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:39.385Z,1516712439.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:39.761Z,1516712439.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:39.776Z,1516712439.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:40.158Z,1516712440.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:40.173Z,1516712440.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:40.552Z,1516712440.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:40.575Z,1516712440.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:40.956Z,1516712440.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:40.976Z,1516712440.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:41.352Z,1516712441.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:41.384Z,1516712441.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:41.768Z,1516712441.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:41.783Z,1516712441.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:42.171Z,1516712442.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:42.186Z,1516712442.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:42.568Z,1516712442.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:42.583Z,1516712442.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:42.952Z,1516712442.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:42.983Z,1516712442.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:43.352Z,1516712443.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:43.374Z,1516712443.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:43.759Z,1516712443.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:43.774Z,1516712443.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:44.146Z,1516712444.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:44.178Z,1516712444.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:44.572Z,1516712444.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:44.587Z,1516712444.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:44.971Z,1516712444.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:44.986Z,1516712444.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:45.368Z,1516712445.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:45.383Z,1516712445.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:45.750Z,1516712445.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:45.785Z,1516712445.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:46.149Z,1516712446.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:46.188Z,1516712446.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:46.564Z,1516712446.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:46.586Z,1516712446.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:46.967Z,1516712446.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:46.986Z,1516712446.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:47.376Z,1516712447.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:47.390Z,1516712447.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:47.749Z,1516712447.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:47.781Z,1516712447.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:48.149Z,1516712448.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:48.181Z,1516712448.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:48.549Z,1516712448.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:48.589Z,1516712448.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:51.660Z,1516712451.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:51.683Z,1516712451.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:51.791Z,1516712451.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:51.833Z,1516712451.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:52.142Z,1516712452.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:52.165Z,1516712452.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:52.543Z,1516712452.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:52.558Z,1516712452.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:52.942Z,1516712452.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:52.965Z,1516712452.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:53.331Z,1516712453.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:53.352Z,1516712453.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:53.735Z,1516712453.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:53.753Z,1516712453.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:54.132Z,1516712454.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:54.152Z,1516712454.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:54.543Z,1516712454.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:54.559Z,1516712454.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:54.947Z,1516712454.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:54.968Z,1516712454.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:55.347Z,1516712455.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:55.362Z,1516712455.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:55.729Z,1516712455.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:55.753Z,1516712455.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:56.133Z,1516712456.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:56.153Z,1516712456.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:56.546Z,1516712456.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:56.569Z,1516712456.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:56.947Z,1516712456.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:56.963Z,1516712456.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:57.344Z,1516712457.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:57.360Z,1516712457.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:57.726Z,1516712457.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:57.761Z,1516712457.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:58.128Z,1516712458.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:58.155Z,1516712458.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:58.542Z,1516712458.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:58.569Z,1516712458.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:58.952Z,1516712458.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:58.967Z,1516712458.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:59.340Z,1516712459.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:59.362Z,1516712459.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:00:59.725Z,1516712459.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:00:59.753Z,1516712459.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:00.129Z,1516712460.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:00.155Z,1516712460.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:00.543Z,1516712460.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:00.559Z,1516712460.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:00.948Z,1516712460.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:00.968Z,1516712460.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:01.344Z,1516712461.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:01.365Z,1516712461.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:01.725Z,1516712461.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:01.752Z,1516712461.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:02.124Z,1516712462.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:02.153Z,1516712462.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:02.543Z,1516712462.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:02.565Z,1516712462.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:02.948Z,1516712462.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:02.963Z,1516712462.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:03.345Z,1516712463.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:03.364Z,1516712463.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:03.742Z,1516712463.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:03.758Z,1516712463.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:04.140Z,1516712464.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:04.160Z,1516712464.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:04.542Z,1516712464.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:04.573Z,1516712464.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:04.948Z,1516712464.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:04.963Z,1516712464.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:05.340Z,1516712465.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:05.371Z,1516712465.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:05.726Z,1516712465.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:05.759Z,1516712465.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:06.128Z,1516712466.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:06.165Z,1516712466.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:06.552Z,1516712466.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:06.575Z,1516712466.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:06.950Z,1516712466.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:07.012Z,1516712467.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:07.338Z,1516712467.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:07.373Z,1516712467.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:07.731Z,1516712467.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:07.777Z,1516712467.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:08.141Z,1516712468.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:08.162Z,1516712468.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:08.563Z,1516712468.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:08.602Z,1516712468.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:08.959Z,1516712468.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:08.978Z,1516712468.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:09.336Z,1516712469.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:09.373Z,1516712469.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:09.725Z,1516712469.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:09.766Z,1516712469.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:10.126Z,1516712470.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:10.141Z,1516712470.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:10.537Z,1516712470.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:10.570Z,1516712470.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:10.943Z,1516712470.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:10.973Z,1516712470.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:11.357Z,1516712471.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:11.377Z,1516712471.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:11.759Z,1516712471.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:11.798Z,1516712471.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:12.139Z,1516712472.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:12.178Z,1516712472.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:12.539Z,1516712472.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:12.581Z,1516712472.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:12.948Z,1516712472.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:12.993Z,1516712472.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:13.335Z,1516712473.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:13.383Z,1516712473.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:13.769Z,1516712473.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:13.805Z,1516712473.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:14.144Z,1516712474.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:14.237Z,1516712474.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:14.544Z,1516712474.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:14.565Z,1516712474.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:14.956Z,1516712474.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:15.003Z,1516712475.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:15.330Z,1516712475.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:15.402Z,1516712475.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:15.727Z,1516712475.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:15.762Z,1516712475.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:16.131Z,1516712476.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:16.166Z,1516712476.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:16.530Z,1516712476.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:16.583Z,1516712476.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:16.942Z,1516712476.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:16.976Z,1516712476.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:17.354Z,1516712477.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:17.387Z,1516712477.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:17.758Z,1516712477.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:17.795Z,1516712477.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:18.136Z,1516712478.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:18.175Z,1516712478.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:18.538Z,1516712478.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:18.562Z,1516712478.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:18.936Z,1516712478.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:18.987Z,1516712478.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:19.335Z,1516712479.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:19.354Z,1516712479.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:19.751Z,1516712479.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:19.770Z,1516712479.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:20.154Z,1516712480.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:20.208Z,1516712480.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:20.545Z,1516712480.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:20.565Z,1516712480.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:20.930Z,1516712480.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:20.970Z,1516712480.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:21.326Z,1516712481.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:21.389Z,1516712481.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:21.739Z,1516712481.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:21.778Z,1516712481.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:22.139Z,1516712482.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:22.161Z,1516712482.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:22.529Z,1516712482.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:22.565Z,1516712482.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:22.943Z,1516712482.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:22.965Z,1516712482.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:23.348Z,1516712483.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:23.362Z,1516712483.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:23.743Z,1516712483.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:23.759Z,1516712483.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:24.125Z,1516712484.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:24.151Z,1516712484.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:24.524Z,1516712484.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:24.561Z,1516712484.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:24.929Z,1516712484.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:24.957Z,1516712484.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:25.322Z,1516712485.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:25.345Z,1516712485.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:25.743Z,1516712485.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:25.779Z,1516712485.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:26.150Z,1516712486.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:26.164Z,1516712486.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:26.535Z,1516712486.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:26.562Z,1516712486.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:26.924Z,1516712486.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:26.961Z,1516712486.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:27.325Z,1516712487.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:27.363Z,1516712487.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:27.725Z,1516712487.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:27.761Z,1516712487.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:28.133Z,1516712488.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:28.160Z,1516712488.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:28.525Z,1516712488.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:28.563Z,1516712488.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:28.948Z,1516712488.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:28.963Z,1516712488.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:29.356Z,1516712489.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:29.371Z,1516712489.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:29.735Z,1516712489.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:29.772Z,1516712489.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:30.123Z,1516712490.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:30.138Z,1516712490.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:30.525Z,1516712490.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:30.561Z,1516712490.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:30.926Z,1516712490.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:30.975Z,1516712490.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:31.322Z,1516712491.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:31.338Z,1516712491.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:31.748Z,1516712491.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:31.775Z,1516712491.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:32.143Z,1516712492.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:32.172Z,1516712492.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:32.540Z,1516712492.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:32.576Z,1516712492.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:32.932Z,1516712492.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:32.950Z,1516712492.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:33.332Z,1516712493.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:33.348Z,1516712493.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:33.729Z,1516712493.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:33.753Z,1516712493.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:34.132Z,1516712494.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:34.147Z,1516712494.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:34.530Z,1516712494.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:34.568Z,1516712494.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:34.948Z,1516712494.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:34.979Z,1516712494.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:35.339Z,1516712495.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:35.355Z,1516712495.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:35.735Z,1516712495.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:35.751Z,1516712495.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:36.128Z,1516712496.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:36.155Z,1516712496.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:36.531Z,1516712496.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:36.553Z,1516712496.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:36.937Z,1516712496.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:36.952Z,1516712496.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:37.331Z,1516712497.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:37.346Z,1516712497.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:37.752Z,1516712497.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:37.782Z,1516712497.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:38.139Z,1516712498.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:38.160Z,1516712498.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:38.538Z,1516712498.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:38.554Z,1516712498.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:38.932Z,1516712498.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:38.949Z,1516712498.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:39.333Z,1516712499.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:39.348Z,1516712499.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:39.732Z,1516712499.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:39.748Z,1516712499.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:40.129Z,1516712500.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:40.157Z,1516712500.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:40.537Z,1516712500.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:40.552Z,1516712500.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:40.939Z,1516712500.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:40.962Z,1516712500.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:41.343Z,1516712501.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:41.365Z,1516712501.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:41.748Z,1516712501.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:41.763Z,1516712501.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:42.132Z,1516712502.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:42.153Z,1516712502.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:42.528Z,1516712502.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:42.561Z,1516712502.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:42.939Z,1516712502.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:42.954Z,1516712502.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:43.322Z,1516712503.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:43.358Z,1516712503.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:43.744Z,1516712503.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:43.760Z,1516712503.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:44.146Z,1516712504.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:44.173Z,1516712504.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:44.540Z,1516712504.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:44.572Z,1516712504.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:44.926Z,1516712504.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:44.965Z,1516712504.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:45.330Z,1516712505.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:45.359Z,1516712505.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:45.729Z,1516712505.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:45.765Z,1516712505.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:46.125Z,1516712506.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:46.165Z,1516712506.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:46.528Z,1516712506.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:46.564Z,1516712506.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:46.951Z,1516712506.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:46.966Z,1516712506.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:47.358Z,1516712507.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:47.373Z,1516712507.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:47.735Z,1516712507.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:47.765Z,1516712507.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:48.122Z,1516712508.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:48.137Z,1516712508.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:48.525Z,1516712508.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:48.565Z,1516712508.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:48.929Z,1516712508.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:48.945Z,1516712508.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:52.041Z,1516712512.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:52.068Z,1516712512.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:52.184Z,1516712512.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:52.257Z,1516712512.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:52.535Z,1516712512.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:52.566Z,1516712512.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:52.938Z,1516712512.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:52.960Z,1516712512.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:53.311Z,1516712513.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:53.326Z,1516712513.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:53.714Z,1516712513.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:53.729Z,1516712513.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:54.120Z,1516712514.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:54.135Z,1516712514.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:54.512Z,1516712514.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:54.527Z,1516712514.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:54.931Z,1516712514.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:54.946Z,1516712514.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:55.327Z,1516712515.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:55.342Z,1516712515.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:55.727Z,1516712515.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:55.742Z,1516712515.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:56.119Z,1516712516.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:56.134Z,1516712516.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:56.514Z,1516712516.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:56.528Z,1516712516.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:56.915Z,1516712516.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:56.930Z,1516712516.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:57.317Z,1516712517.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:57.332Z,1516712517.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:57.731Z,1516712517.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:57.746Z,1516712517.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:58.132Z,1516712518.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:58.161Z,1516712518.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:58.528Z,1516712518.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:58.553Z,1516712518.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:58.915Z,1516712518.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:58.951Z,1516712518.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:59.316Z,1516712519.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:59.342Z,1516712519.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:01:59.732Z,1516712519.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:01:59.754Z,1516712519.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:00.113Z,1516712520.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:00.146Z,1516712520.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:00.512Z,1516712520.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:00.549Z,1516712520.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:00.939Z,1516712520.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:00.955Z,1516712520.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:01.344Z,1516712521.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:01.359Z,1516712521.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:01.731Z,1516712521.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:01.746Z,1516712521.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:02.114Z,1516712522.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:02.150Z,1516712522.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:02.518Z,1516712522.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:02.550Z,1516712522.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:02.921Z,1516712522.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:02.948Z,1516712522.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:03.311Z,1516712523.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:03.349Z,1516712523.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:03.749Z,1516712523.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:03.771Z,1516712523.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:04.123Z,1516712524.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:04.161Z,1516712524.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:04.539Z,1516712524.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:04.555Z,1516712524.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:04.916Z,1516712524.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:04.955Z,1516712524.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:05.311Z,1516712525.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:05.329Z,1516712525.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:05.714Z,1516712525.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:05.729Z,1516712525.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:06.121Z,1516712526.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:06.136Z,1516712526.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:06.513Z,1516712526.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:06.533Z,1516712526.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:06.936Z,1516712526.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:06.961Z,1516712526.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:07.335Z,1516712527.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:07.362Z,1516712527.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:07.731Z,1516712527.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:07.762Z,1516712527.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:08.125Z,1516712528.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:08.140Z,1516712528.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:08.524Z,1516712528.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:08.539Z,1516712528.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:08.922Z,1516712528.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:08.942Z,1516712528.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:09.321Z,1516712529.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:09.348Z,1516712529.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:09.739Z,1516712529.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:09.778Z,1516712529.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:10.129Z,1516712530.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:10.149Z,1516712530.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:10.534Z,1516712530.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:10.550Z,1516712530.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:10.923Z,1516712530.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:10.939Z,1516712530.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:11.322Z,1516712531.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:11.342Z,1516712531.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:11.716Z,1516712531.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:11.749Z,1516712531.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:12.129Z,1516712532.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:12.144Z,1516712532.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:12.516Z,1516712532.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:12.539Z,1516712532.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:12.934Z,1516712532.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:12.960Z,1516712532.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:13.341Z,1516712533.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:13.357Z,1516712533.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:13.738Z,1516712533.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:13.754Z,1516712533.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:14.114Z,1516712534.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:14.143Z,1516712534.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:14.515Z,1516712534.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:14.541Z,1516712534.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:14.913Z,1516712534.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:14.943Z,1516712534.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:15.312Z,1516712535.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:15.351Z,1516712535.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:15.734Z,1516712535.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:15.749Z,1516712535.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:16.128Z,1516712536.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:16.156Z,1516712536.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:16.540Z,1516712536.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:16.556Z,1516712536.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:16.917Z,1516712536.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:16.948Z,1516712536.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:17.312Z,1516712537.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:17.337Z,1516712537.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:17.714Z,1516712537.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:17.749Z,1516712537.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:18.113Z,1516712538.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:18.148Z,1516712538.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:18.510Z,1516712538.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:18.535Z,1516712538.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:18.925Z,1516712538.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:18.957Z,1516712538.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:19.341Z,1516712539.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:19.356Z,1516712539.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:19.727Z,1516712539.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:19.761Z,1516712539.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:20.112Z,1516712540.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:20.160Z,1516712540.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:20.513Z,1516712540.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:20.548Z,1516712540.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:20.916Z,1516712540.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:20.931Z,1516712540.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:21.317Z,1516712541.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:21.361Z,1516712541.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:21.728Z,1516712541.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:21.761Z,1516712541.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:22.130Z,1516712542.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:22.165Z,1516712542.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:22.532Z,1516712542.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:22.564Z,1516712542.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:22.925Z,1516712542.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:22.963Z,1516712542.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:23.314Z,1516712543.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:23.332Z,1516712543.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:23.720Z,1516712543.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:23.744Z,1516712543.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:24.124Z,1516712544.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:24.139Z,1516712544.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:24.514Z,1516712544.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:24.543Z,1516712544.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:24.939Z,1516712544.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:24.964Z,1516712544.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:25.334Z,1516712545.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:25.368Z,1516712545.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:25.737Z,1516712545.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:25.768Z,1516712545.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:26.124Z,1516712546.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:26.172Z,1516712546.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:26.517Z,1516712546.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:26.552Z,1516712546.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:26.920Z,1516712546.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:26.939Z,1516712546.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:27.322Z,1516712547.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:27.338Z,1516712547.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:27.723Z,1516712547.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:27.769Z,1516712547.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:28.123Z,1516712548.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:28.142Z,1516712548.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:28.523Z,1516712548.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:28.542Z,1516712548.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:28.923Z,1516712548.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:28.938Z,1516712548.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:29.320Z,1516712549.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:29.367Z,1516712549.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:29.720Z,1516712549.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:29.735Z,1516712549.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:30.121Z,1516712550.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:30.140Z,1516712550.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:30.516Z,1516712550.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:30.541Z,1516712550.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:30.926Z,1516712550.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:30.969Z,1516712550.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:31.327Z,1516712551.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:31.344Z,1516712551.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:31.730Z,1516712551.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:31.749Z,1516712551.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:32.121Z,1516712552.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:32.139Z,1516712552.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:32.521Z,1516712552.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:32.545Z,1516712552.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:32.917Z,1516712552.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:32.939Z,1516712552.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:33.316Z,1516712553.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:33.342Z,1516712553.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:33.734Z,1516712553.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:33.749Z,1516712553.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:34.130Z,1516712554.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:34.174Z,1516712554.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:34.530Z,1516712554.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:34.548Z,1516712554.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:34.922Z,1516712554.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:34.945Z,1516712554.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:35.310Z,1516712555.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:35.348Z,1516712555.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:35.738Z,1516712555.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:35.754Z,1516712555.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:36.136Z,1516712556.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:36.154Z,1516712556.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:36.528Z,1516712556.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:36.554Z,1516712556.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:36.913Z,1516712556.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:36.951Z,1516712556.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:37.312Z,1516712557.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:37.347Z,1516712557.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:37.736Z,1516712557.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:37.757Z,1516712557.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:38.133Z,1516712558.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:38.165Z,1516712558.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:38.541Z,1516712558.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:38.556Z,1516712558.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:38.917Z,1516712558.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:38.945Z,1516712558.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:39.311Z,1516712559.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:39.350Z,1516712559.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:39.723Z,1516712559.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:39.767Z,1516712559.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:40.124Z,1516712560.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:40.159Z,1516712560.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:40.523Z,1516712560.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:40.561Z,1516712560.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:40.917Z,1516712560.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:40.957Z,1516712560.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:41.310Z,1516712561.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:41.325Z,1516712561.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:41.723Z,1516712561.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:41.763Z,1516712561.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:42.135Z,1516712562.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:42.171Z,1516712562.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:42.523Z,1516712562.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:42.538Z,1516712562.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:42.918Z,1516712562.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:42.933Z,1516712562.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:43.319Z,1516712563.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:43.334Z,1516712563.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:43.727Z,1516712563.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:43.742Z,1516712563.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:44.135Z,1516712564.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:44.171Z,1516712564.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:44.527Z,1516712564.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:44.549Z,1516712564.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:44.922Z,1516712564.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:44.937Z,1516712564.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:45.321Z,1516712565.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:45.336Z,1516712565.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:45.728Z,1516712565.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:45.757Z,1516712565.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:46.136Z,1516712566.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:46.151Z,1516712566.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:46.539Z,1516712566.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:46.558Z,1516712566.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:46.914Z,1516712566.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:46.950Z,1516712566.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:47.311Z,1516712567.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:47.326Z,1516712567.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:47.724Z,1516712567.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:47.766Z,1516712567.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:48.128Z,1516712568.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:48.168Z,1516712568.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:48.524Z,1516712568.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:48.556Z,1516712568.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:48.922Z,1516712568.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:48.937Z,1516712568.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:49.318Z,1516712569.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:49.345Z,1516712569.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:52.435Z,1516712572.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:52.471Z,1516712572.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:52.473Z,1516712572.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:52.473Z,1516712572.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195 2018-01-23T13:02:52.473Z,1516712572.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:02:52.498Z,1516712572.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:02:52.576Z,1516712572.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:52.592Z,1516712572.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:52.592Z,1516712572.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195 2018-01-23T13:02:52.592Z,1516712572.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:02:52.594Z,1516712572.594 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:52.594Z,1516712572.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 195 2018-01-23T13:02:52.594Z,1516712572.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:02:52.606Z,1516712572.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:02:52.607Z,1516712572.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:02:52.607Z,1516712572.607 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:02:52.607Z,1516712572.607 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195 2018-01-23T13:02:52.958Z,1516712572.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:52.992Z,1516712572.992 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:02:52.992Z,1516712572.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:02:52.993Z,1516712572.993 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:02:53.004Z,1516712573.004 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:02:53.004Z,1516712573.004 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195 2018-01-23T13:02:53.005Z,1516712573.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:02:53.005Z,1516712573.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 195 2018-01-23T13:02:53.346Z,1516712573.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:53.380Z,1516712573.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:02:53.380Z,1516712573.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:02:53.380Z,1516712573.380 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:02:53.381Z,1516712573.381 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:02:53.381Z,1516712573.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:02:53.381Z,1516712573.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:02:53.739Z,1516712573.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:53.754Z,1516712573.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:02:53.755Z,1516712573.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:54.140Z,1516712574.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:54.167Z,1516712574.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:02:54.169Z,1516712574.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:54.544Z,1516712574.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:54.564Z,1516712574.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:02:54.566Z,1516712574.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:54.950Z,1516712574.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:54.965Z,1516712574.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:02:54.966Z,1516712574.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:55.351Z,1516712575.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:55.372Z,1516712575.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:02:55.373Z,1516712575.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:55.751Z,1516712575.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:55.776Z,1516712575.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:02:55.777Z,1516712575.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:56.133Z,1516712576.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:56.163Z,1516712576.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:02:56.165Z,1516712576.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:56.533Z,1516712576.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:56.568Z,1516712576.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:02:56.569Z,1516712576.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:56.933Z,1516712576.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:56.969Z,1516712576.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:02:56.970Z,1516712576.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:57.333Z,1516712577.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:57.373Z,1516712577.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:02:57.375Z,1516712577.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:57.748Z,1516712577.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:57.784Z,1516712577.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:02:57.785Z,1516712577.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:58.148Z,1516712578.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:58.188Z,1516712578.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:02:58.189Z,1516712578.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:58.547Z,1516712578.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:58.573Z,1516712578.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:02:58.574Z,1516712578.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:58.934Z,1516712578.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:58.968Z,1516712578.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:02:58.969Z,1516712578.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:59.332Z,1516712579.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:59.353Z,1516712579.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:02:59.354Z,1516712579.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:02:59.752Z,1516712579.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:02:59.776Z,1516712579.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:02:59.777Z,1516712579.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:00.169Z,1516712580.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:00.185Z,1516712580.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:03:00.186Z,1516712580.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:00.552Z,1516712580.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:00.581Z,1516712580.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:03:00.583Z,1516712580.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:00.945Z,1516712580.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:00.977Z,1516712580.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:03:00.978Z,1516712580.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:01.344Z,1516712581.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:01.380Z,1516712581.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:03:01.381Z,1516712581.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:01.748Z,1516712581.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:01.763Z,1516712581.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:03:01.764Z,1516712581.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:02.148Z,1516712582.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:02.163Z,1516712582.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:03:02.164Z,1516712582.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:02.548Z,1516712582.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:02.563Z,1516712582.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:03:02.564Z,1516712582.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:02.941Z,1516712582.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:02.962Z,1516712582.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:03:02.963Z,1516712582.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:03.338Z,1516712583.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:03.370Z,1516712583.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:03:03.371Z,1516712583.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:03.752Z,1516712583.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:03.768Z,1516712583.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:03:03.768Z,1516712583.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:04.155Z,1516712584.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:04.180Z,1516712584.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:03:04.181Z,1516712584.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:04.557Z,1516712584.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:04.572Z,1516712584.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:03:04.573Z,1516712584.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:04.951Z,1516712584.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:04.967Z,1516712584.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:03:04.968Z,1516712584.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:05.332Z,1516712585.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:05.370Z,1516712585.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:03:05.371Z,1516712585.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:05.748Z,1516712585.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:05.774Z,1516712585.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:03:05.780Z,1516712585.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:06.162Z,1516712586.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:06.177Z,1516712586.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:03:06.178Z,1516712586.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:06.551Z,1516712586.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:06.571Z,1516712586.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:03:06.572Z,1516712586.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:06.933Z,1516712586.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:06.960Z,1516712586.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:03:06.961Z,1516712586.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:07.333Z,1516712587.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:07.369Z,1516712587.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:03:07.370Z,1516712587.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:07.743Z,1516712587.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:07.777Z,1516712587.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:03:07.778Z,1516712587.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:08.155Z,1516712588.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:08.185Z,1516712588.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:03:08.186Z,1516712588.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:08.542Z,1516712588.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:08.572Z,1516712588.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:03:08.573Z,1516712588.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:08.933Z,1516712588.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:08.956Z,1516712588.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:03:08.957Z,1516712588.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:09.332Z,1516712589.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:09.369Z,1516712589.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:03:09.370Z,1516712589.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:09.743Z,1516712589.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:09.784Z,1516712589.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:03:09.785Z,1516712589.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:10.152Z,1516712590.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:10.185Z,1516712590.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:03:10.186Z,1516712590.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:10.556Z,1516712590.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:10.584Z,1516712590.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:03:10.585Z,1516712590.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:10.937Z,1516712590.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:10.953Z,1516712590.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:03:10.953Z,1516712590.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:11.337Z,1516712591.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:11.353Z,1516712591.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:03:11.354Z,1516712591.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:11.748Z,1516712591.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:11.787Z,1516712591.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:03:11.788Z,1516712591.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:12.143Z,1516712592.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:12.158Z,1516712592.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:03:12.159Z,1516712592.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:12.544Z,1516712592.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:12.559Z,1516712592.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:03:12.560Z,1516712592.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:12.938Z,1516712592.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:12.965Z,1516712592.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:13.341Z,1516712593.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:13.357Z,1516712593.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:13.746Z,1516712593.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:13.761Z,1516712593.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:14.148Z,1516712594.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:14.163Z,1516712594.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:14.560Z,1516712594.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:14.592Z,1516712594.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:14.944Z,1516712594.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:14.965Z,1516712594.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:15.340Z,1516712595.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:15.355Z,1516712595.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:15.746Z,1516712595.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:15.768Z,1516712595.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:16.154Z,1516712596.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:16.169Z,1516712596.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:16.551Z,1516712596.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:16.573Z,1516712596.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:16.942Z,1516712596.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:16.957Z,1516712596.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:17.341Z,1516712597.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:17.361Z,1516712597.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:17.751Z,1516712597.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:17.766Z,1516712597.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:18.155Z,1516712598.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:18.177Z,1516712598.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:18.552Z,1516712598.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:18.567Z,1516712598.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:18.933Z,1516712598.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:18.965Z,1516712598.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:19.332Z,1516712599.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:19.369Z,1516712599.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:19.752Z,1516712599.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:19.767Z,1516712599.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:20.155Z,1516712600.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:20.170Z,1516712600.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:20.551Z,1516712600.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:20.577Z,1516712600.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:20.945Z,1516712600.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:20.961Z,1516712600.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:21.332Z,1516712601.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:21.365Z,1516712601.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:21.752Z,1516712601.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:21.767Z,1516712601.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:22.155Z,1516712602.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:22.170Z,1516712602.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:22.552Z,1516712602.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:22.580Z,1516712602.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:22.937Z,1516712602.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:22.965Z,1516712602.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:23.336Z,1516712603.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:23.363Z,1516712603.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:23.752Z,1516712603.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:23.768Z,1516712603.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:24.155Z,1516712604.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:24.177Z,1516712604.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:24.556Z,1516712604.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:24.571Z,1516712604.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:24.932Z,1516712604.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:24.969Z,1516712604.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:25.333Z,1516712605.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:25.371Z,1516712605.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:25.736Z,1516712605.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:25.769Z,1516712605.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:26.153Z,1516712606.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:26.168Z,1516712606.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:26.557Z,1516712606.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:26.571Z,1516712606.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:26.961Z,1516712606.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:26.977Z,1516712606.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:27.333Z,1516712607.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:27.365Z,1516712607.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:27.737Z,1516712607.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:27.771Z,1516712607.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:28.134Z,1516712608.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:28.173Z,1516712608.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:28.537Z,1516712608.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:28.568Z,1516712608.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:28.948Z,1516712608.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:28.977Z,1516712608.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:29.348Z,1516712609.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:29.375Z,1516712609.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:29.744Z,1516712609.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:29.777Z,1516712609.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:30.140Z,1516712610.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:30.156Z,1516712610.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:30.538Z,1516712610.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:30.554Z,1516712610.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:30.937Z,1516712610.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:30.953Z,1516712610.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:31.340Z,1516712611.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:31.356Z,1516712611.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:31.742Z,1516712611.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:31.757Z,1516712611.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:32.148Z,1516712612.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:32.163Z,1516712612.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:32.547Z,1516712612.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:32.562Z,1516712612.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:32.943Z,1516712612.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:32.959Z,1516712612.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:33.341Z,1516712613.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:33.357Z,1516712613.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:33.740Z,1516712613.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:33.757Z,1516712613.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:34.138Z,1516712614.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:34.158Z,1516712614.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:34.540Z,1516712614.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:34.561Z,1516712614.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:34.946Z,1516712614.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:34.962Z,1516712614.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:35.348Z,1516712615.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:35.363Z,1516712615.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:35.746Z,1516712615.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:35.761Z,1516712615.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:36.141Z,1516712616.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:36.156Z,1516712616.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:36.540Z,1516712616.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:36.556Z,1516712616.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:36.941Z,1516712616.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:36.956Z,1516712616.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:37.344Z,1516712617.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:37.359Z,1516712617.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:37.740Z,1516712617.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:37.755Z,1516712617.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:38.146Z,1516712618.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:38.169Z,1516712618.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:38.548Z,1516712618.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:38.563Z,1516712618.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:38.947Z,1516712618.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:38.962Z,1516712618.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:39.341Z,1516712619.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:39.356Z,1516712619.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:39.743Z,1516712619.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:39.758Z,1516712619.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:40.146Z,1516712620.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:40.161Z,1516712620.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:40.540Z,1516712620.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:40.560Z,1516712620.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:40.949Z,1516712620.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:40.968Z,1516712620.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:41.344Z,1516712621.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:41.369Z,1516712621.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:41.752Z,1516712621.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:41.767Z,1516712621.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:42.143Z,1516712622.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:42.159Z,1516712622.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:42.536Z,1516712622.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:42.569Z,1516712622.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:42.946Z,1516712622.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:42.962Z,1516712622.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:43.343Z,1516712623.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:43.359Z,1516712623.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:43.736Z,1516712623.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:43.762Z,1516712623.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:44.151Z,1516712624.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:44.182Z,1516712624.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:44.555Z,1516712624.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:44.571Z,1516712624.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:44.952Z,1516712624.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:44.969Z,1516712624.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:45.339Z,1516712625.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:45.361Z,1516712625.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:45.742Z,1516712625.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:45.758Z,1516712625.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:46.140Z,1516712626.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:46.161Z,1516712626.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:46.539Z,1516712626.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:46.560Z,1516712626.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:46.952Z,1516712626.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:46.968Z,1516712626.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:47.348Z,1516712627.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:47.373Z,1516712627.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:47.756Z,1516712627.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:47.770Z,1516712627.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:48.132Z,1516712628.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:48.167Z,1516712628.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:48.530Z,1516712628.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:48.566Z,1516712628.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:48.932Z,1516712628.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:48.965Z,1516712628.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:49.334Z,1516712629.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:49.361Z,1516712629.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:52.441Z,1516712632.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:52.456Z,1516712632.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:52.567Z,1516712632.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:52.603Z,1516712632.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:52.911Z,1516712632.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:52.926Z,1516712632.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:53.327Z,1516712633.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:53.351Z,1516712633.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:53.710Z,1516712633.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:53.725Z,1516712633.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:54.110Z,1516712634.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:54.125Z,1516712634.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:54.505Z,1516712634.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:54.520Z,1516712634.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:54.910Z,1516712634.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:54.929Z,1516712634.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:55.323Z,1516712635.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:55.356Z,1516712635.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:55.710Z,1516712635.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:55.732Z,1516712635.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:56.106Z,1516712636.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:56.121Z,1516712636.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:56.509Z,1516712636.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:56.524Z,1516712636.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:56.909Z,1516712636.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:56.924Z,1516712636.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:57.310Z,1516712637.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:57.326Z,1516712637.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:57.709Z,1516712637.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:57.724Z,1516712637.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:58.123Z,1516712638.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:58.157Z,1516712638.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:58.523Z,1516712638.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:58.556Z,1516712638.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:58.911Z,1516712638.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:58.925Z,1516712638.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:59.304Z,1516712639.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:59.319Z,1516712639.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:03:59.706Z,1516712639.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:03:59.729Z,1516712639.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:00.110Z,1516712640.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:00.125Z,1516712640.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:00.510Z,1516712640.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:00.524Z,1516712640.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:00.923Z,1516712640.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:00.956Z,1516712640.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:01.315Z,1516712641.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:01.330Z,1516712641.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:01.723Z,1516712641.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:01.738Z,1516712641.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:02.109Z,1516712642.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:02.124Z,1516712642.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:02.510Z,1516712642.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:02.525Z,1516712642.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:02.906Z,1516712642.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:02.920Z,1516712642.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:03.301Z,1516712643.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:03.328Z,1516712643.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:03.709Z,1516712643.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:03.724Z,1516712643.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:04.114Z,1516712644.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:04.129Z,1516712644.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:04.514Z,1516712644.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:04.537Z,1516712644.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:04.919Z,1516712644.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:04.933Z,1516712644.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:05.303Z,1516712645.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:05.325Z,1516712645.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:05.704Z,1516712645.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:05.723Z,1516712645.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:06.099Z,1516712646.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:06.133Z,1516712646.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:06.503Z,1516712646.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:06.529Z,1516712646.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:06.913Z,1516712646.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:06.933Z,1516712646.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:07.318Z,1516712647.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:07.334Z,1516712647.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:07.715Z,1516712647.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:07.730Z,1516712647.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:08.101Z,1516712648.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:08.123Z,1516712648.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:08.503Z,1516712648.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:08.523Z,1516712648.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:08.905Z,1516712648.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:08.924Z,1516712648.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:09.310Z,1516712649.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:09.325Z,1516712649.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:09.703Z,1516712649.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:09.723Z,1516712649.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:10.116Z,1516712650.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:10.130Z,1516712650.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:10.519Z,1516712650.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:10.534Z,1516712650.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:10.914Z,1516712650.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:10.929Z,1516712650.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:11.307Z,1516712651.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:11.322Z,1516712651.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:11.701Z,1516712651.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:11.729Z,1516712651.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:12.110Z,1516712652.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:12.125Z,1516712652.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:12.495Z,1516712652.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:12.532Z,1516712652.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:12.916Z,1516712652.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:12.931Z,1516712652.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:13.318Z,1516712653.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:13.341Z,1516712653.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:13.721Z,1516712653.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:13.736Z,1516712653.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:14.097Z,1516712654.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:14.133Z,1516712654.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:14.497Z,1516712654.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:14.533Z,1516712654.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:14.897Z,1516712654.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:14.931Z,1516712654.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:15.298Z,1516712655.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:15.329Z,1516712655.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:15.697Z,1516712655.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:15.733Z,1516712655.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:16.108Z,1516712656.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:16.144Z,1516712656.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:16.516Z,1516712656.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:16.538Z,1516712656.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:16.925Z,1516712656.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:16.940Z,1516712656.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:17.297Z,1516712657.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:17.337Z,1516712657.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:17.701Z,1516712657.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:17.738Z,1516712657.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:18.098Z,1516712658.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:18.129Z,1516712658.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:18.501Z,1516712658.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:18.540Z,1516712658.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:18.916Z,1516712658.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:18.940Z,1516712658.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:19.320Z,1516712659.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:19.353Z,1516712659.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:19.716Z,1516712659.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:19.741Z,1516712659.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:20.105Z,1516712660.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:20.141Z,1516712660.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:20.506Z,1516712660.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:20.521Z,1516712660.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:20.901Z,1516712660.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:20.938Z,1516712660.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:21.306Z,1516712661.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:21.322Z,1516712661.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:21.702Z,1516712661.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:21.725Z,1516712661.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:22.119Z,1516712662.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:22.135Z,1516712662.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:22.514Z,1516712662.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:22.529Z,1516712662.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:22.912Z,1516712662.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:22.940Z,1516712662.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:23.310Z,1516712663.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:23.325Z,1516712663.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:23.707Z,1516712663.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:23.727Z,1516712663.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:24.097Z,1516712664.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:24.128Z,1516712664.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:24.510Z,1516712664.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:24.525Z,1516712664.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:24.914Z,1516712664.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:24.929Z,1516712664.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:25.318Z,1516712665.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:25.333Z,1516712665.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:25.715Z,1516712665.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:25.730Z,1516712665.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:26.097Z,1516712666.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:26.129Z,1516712666.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:26.496Z,1516712666.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:26.528Z,1516712666.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:26.897Z,1516712666.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:26.933Z,1516712666.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:27.298Z,1516712667.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:27.324Z,1516712667.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:27.696Z,1516712667.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:27.728Z,1516712667.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:28.116Z,1516712668.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:28.131Z,1516712668.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:28.518Z,1516712668.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:28.533Z,1516712668.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:28.912Z,1516712668.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:28.930Z,1516712668.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:29.297Z,1516712669.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:29.325Z,1516712669.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:29.338Z,1516712669.338 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:04:29.713Z,1516712669.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:29.729Z,1516712669.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:30.098Z,1516712670.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:30.124Z,1516712670.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:30.496Z,1516712670.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:30.532Z,1516712670.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:30.916Z,1516712670.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:30.930Z,1516712670.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:31.320Z,1516712671.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:31.334Z,1516712671.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:31.717Z,1516712671.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:31.736Z,1516712671.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:32.102Z,1516712672.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:32.128Z,1516712672.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:32.496Z,1516712672.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:32.529Z,1516712672.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:32.921Z,1516712672.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:32.936Z,1516712672.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:33.307Z,1516712673.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:33.341Z,1516712673.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:33.707Z,1516712673.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:33.745Z,1516712673.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:34.101Z,1516712674.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:34.141Z,1516712674.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:34.494Z,1516712674.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:34.509Z,1516712674.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:34.907Z,1516712674.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:34.938Z,1516712674.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:35.315Z,1516712675.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:35.340Z,1516712675.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:35.715Z,1516712675.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:35.738Z,1516712675.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:36.109Z,1516712676.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:36.140Z,1516712676.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:36.501Z,1516712676.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:36.516Z,1516712676.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:36.919Z,1516712676.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:36.943Z,1516712676.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:37.324Z,1516712677.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:37.353Z,1516712677.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:37.719Z,1516712677.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:37.745Z,1516712677.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:38.102Z,1516712678.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:38.117Z,1516712678.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:38.501Z,1516712678.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:38.524Z,1516712678.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:38.907Z,1516712678.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:38.922Z,1516712678.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:39.307Z,1516712679.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:39.322Z,1516712679.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:39.708Z,1516712679.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:39.723Z,1516712679.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:40.105Z,1516712680.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:40.120Z,1516712680.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:40.501Z,1516712680.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:40.522Z,1516712680.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:40.908Z,1516712680.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:40.923Z,1516712680.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:41.311Z,1516712681.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:41.326Z,1516712681.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:41.719Z,1516712681.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:41.751Z,1516712681.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:42.100Z,1516712682.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:42.123Z,1516712682.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:42.504Z,1516712682.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:42.531Z,1516712682.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:42.915Z,1516712682.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:42.930Z,1516712682.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:43.314Z,1516712683.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:43.337Z,1516712683.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:43.716Z,1516712683.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:43.736Z,1516712683.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:44.104Z,1516712684.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:44.125Z,1516712684.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:44.500Z,1516712684.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:44.532Z,1516712684.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:44.916Z,1516712684.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:44.931Z,1516712684.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:45.314Z,1516712685.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:45.330Z,1516712685.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:45.715Z,1516712685.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:45.730Z,1516712685.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:46.106Z,1516712686.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:46.121Z,1516712686.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:46.494Z,1516712686.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:46.526Z,1516712686.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:46.919Z,1516712686.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:46.934Z,1516712686.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:47.320Z,1516712687.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:47.335Z,1516712687.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:47.712Z,1516712687.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:47.739Z,1516712687.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:48.097Z,1516712688.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:48.124Z,1516712688.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:48.496Z,1516712688.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:48.532Z,1516712688.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:48.535Z,1516712688.535 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:04:48.535Z,1516712688.535 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:04:48.535Z,1516712688.535 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:04:48.535Z,1516712688.535 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:04:48.926Z,1516712688.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:48.941Z,1516712688.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:48.944Z,1516712688.944 [Default:CheckIn:D] Stopped 2018-01-23T13:04:48.944Z,1516712688.944 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:04:49.319Z,1516712689.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:49.334Z,1516712689.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:49.337Z,1516712689.337 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 586.948047 min 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn:E] Stopped 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn] Stopped 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn](INFO): Running loop #58 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn] Running Loop=58 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:04:49.338Z,1516712689.338 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:04:49.717Z,1516712689.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:49.736Z,1516712689.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:52.793Z,1516712692.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:52.825Z,1516712692.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:52.924Z,1516712692.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:52.974Z,1516712692.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:53.296Z,1516712693.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:53.331Z,1516712693.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:53.685Z,1516712693.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:53.700Z,1516712693.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:54.083Z,1516712694.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:54.098Z,1516712694.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:54.476Z,1516712694.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:54.492Z,1516712694.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:54.878Z,1516712694.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:54.894Z,1516712694.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:55.276Z,1516712695.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:55.297Z,1516712695.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:55.676Z,1516712695.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:55.697Z,1516712695.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:56.084Z,1516712696.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:56.100Z,1516712696.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:56.483Z,1516712696.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:56.505Z,1516712696.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:56.886Z,1516712696.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:56.902Z,1516712696.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:57.274Z,1516712697.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:57.290Z,1516712697.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:57.685Z,1516712697.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:57.701Z,1516712697.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:58.076Z,1516712698.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:58.091Z,1516712698.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:58.474Z,1516712698.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:58.494Z,1516712698.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:58.876Z,1516712698.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:58.891Z,1516712698.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:59.285Z,1516712699.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:59.301Z,1516712699.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:04:59.686Z,1516712699.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:04:59.702Z,1516712699.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:00.082Z,1516712700.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:00.109Z,1516712700.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:00.480Z,1516712700.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:00.495Z,1516712700.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:00.881Z,1516712700.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:00.896Z,1516712700.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:01.273Z,1516712701.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:01.296Z,1516712701.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:01.677Z,1516712701.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:01.697Z,1516712701.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:02.091Z,1516712702.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:02.106Z,1516712702.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:02.490Z,1516712702.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:02.509Z,1516712702.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:02.887Z,1516712702.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:02.902Z,1516712702.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:03.266Z,1516712703.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:03.294Z,1516712703.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:03.668Z,1516712703.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:03.701Z,1516712703.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:04.068Z,1516712704.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:04.101Z,1516712704.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:04.467Z,1516712704.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:04.498Z,1516712704.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:04.872Z,1516712704.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:04.898Z,1516712704.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:05.286Z,1516712705.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:05.302Z,1516712705.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:05.688Z,1516712705.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:05.704Z,1516712705.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:06.084Z,1516712706.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:06.105Z,1516712706.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:06.468Z,1516712706.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:06.503Z,1516712706.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:06.873Z,1516712706.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:06.900Z,1516712706.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:07.269Z,1516712707.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:07.293Z,1516712707.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:07.668Z,1516712707.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:07.701Z,1516712707.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:08.092Z,1516712708.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:08.108Z,1516712708.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:08.489Z,1516712708.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:08.519Z,1516712708.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:08.888Z,1516712708.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:08.908Z,1516712708.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:09.266Z,1516712709.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:09.289Z,1516712709.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:09.668Z,1516712709.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:09.705Z,1516712709.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:10.067Z,1516712710.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:10.105Z,1516712710.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:10.467Z,1516712710.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:10.482Z,1516712710.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:10.868Z,1516712710.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:10.909Z,1516712710.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:11.279Z,1516712711.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:11.314Z,1516712711.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:11.679Z,1516712711.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:11.702Z,1516712711.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:12.083Z,1516712712.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:12.114Z,1516712712.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:12.473Z,1516712712.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:12.493Z,1516712712.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:12.878Z,1516712712.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:12.893Z,1516712712.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:13.273Z,1516712713.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:13.300Z,1516712713.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:13.678Z,1516712713.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:13.697Z,1516712713.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:14.091Z,1516712714.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:14.106Z,1516712714.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:14.483Z,1516712714.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:14.498Z,1516712714.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:14.896Z,1516712714.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:14.933Z,1516712714.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:15.275Z,1516712715.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:15.290Z,1516712715.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:15.672Z,1516712715.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:15.705Z,1516712715.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:16.081Z,1516712716.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:16.096Z,1516712716.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:16.479Z,1516712716.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:16.494Z,1516712716.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:16.876Z,1516712716.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:16.895Z,1516712716.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:17.287Z,1516712717.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:17.303Z,1516712717.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:17.686Z,1516712717.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:17.701Z,1516712717.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:18.086Z,1516712718.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:18.109Z,1516712718.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:18.481Z,1516712718.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:18.501Z,1516712718.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:18.877Z,1516712718.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:18.892Z,1516712718.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:19.273Z,1516712719.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:19.304Z,1516712719.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:19.672Z,1516712719.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:19.703Z,1516712719.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:20.088Z,1516712720.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:20.103Z,1516712720.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:20.490Z,1516712720.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:20.506Z,1516712720.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:20.887Z,1516712720.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:20.902Z,1516712720.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:21.266Z,1516712721.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:21.293Z,1516712721.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:21.668Z,1516712721.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:21.694Z,1516712721.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:22.068Z,1516712722.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:22.101Z,1516712722.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:22.473Z,1516712722.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:22.500Z,1516712722.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:22.868Z,1516712722.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:22.901Z,1516712722.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:23.291Z,1516712723.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:23.313Z,1516712723.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:23.692Z,1516712723.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:23.708Z,1516712723.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:24.079Z,1516712724.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:24.113Z,1516712724.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:24.477Z,1516712724.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:24.497Z,1516712724.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:24.877Z,1516712724.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:24.892Z,1516712724.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:25.274Z,1516712725.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:25.301Z,1516712725.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:25.678Z,1516712725.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:25.693Z,1516712725.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:26.079Z,1516712726.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:26.094Z,1516712726.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:26.483Z,1516712726.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:26.498Z,1516712726.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:26.879Z,1516712726.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:26.895Z,1516712726.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:27.276Z,1516712727.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:27.294Z,1516712727.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:27.676Z,1516712727.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:27.697Z,1516712727.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:28.077Z,1516712728.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:28.092Z,1516712728.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:28.478Z,1516712728.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:28.493Z,1516712728.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:28.878Z,1516712728.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:28.893Z,1516712728.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:29.283Z,1516712729.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:29.299Z,1516712729.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:29.695Z,1516712729.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:29.726Z,1516712729.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:30.084Z,1516712730.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:30.099Z,1516712730.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:30.475Z,1516712730.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:30.497Z,1516712730.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:30.878Z,1516712730.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:30.893Z,1516712730.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:31.276Z,1516712731.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:31.304Z,1516712731.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:31.681Z,1516712731.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:31.696Z,1516712731.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:32.088Z,1516712732.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:32.103Z,1516712732.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:32.492Z,1516712732.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:32.529Z,1516712732.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:32.887Z,1516712732.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:32.909Z,1516712732.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:33.278Z,1516712733.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:33.293Z,1516712733.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:33.671Z,1516712733.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:33.705Z,1516712733.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:34.077Z,1516712734.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:34.092Z,1516712734.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:34.472Z,1516712734.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:34.504Z,1516712734.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:34.884Z,1516712734.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:34.901Z,1516712734.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:35.290Z,1516712735.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:35.305Z,1516712735.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:35.691Z,1516712735.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:35.706Z,1516712735.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:36.088Z,1516712736.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:36.103Z,1516712736.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:36.476Z,1516712736.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:36.492Z,1516712736.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:36.878Z,1516712736.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:36.907Z,1516712736.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:37.269Z,1516712737.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:37.296Z,1516712737.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:37.668Z,1516712737.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:37.704Z,1516712737.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:38.088Z,1516712738.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:38.103Z,1516712738.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:38.494Z,1516712738.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:38.517Z,1516712738.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:38.886Z,1516712738.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:38.901Z,1516712738.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:39.269Z,1516712739.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:39.306Z,1516712739.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:39.668Z,1516712739.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:39.694Z,1516712739.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:40.072Z,1516712740.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:40.107Z,1516712740.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:40.469Z,1516712740.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:40.496Z,1516712740.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:40.868Z,1516712740.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:40.901Z,1516712740.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:41.286Z,1516712741.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:41.310Z,1516712741.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:41.696Z,1516712741.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:41.711Z,1516712741.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:42.098Z,1516712742.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:42.113Z,1516712742.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:42.468Z,1516712742.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:42.495Z,1516712742.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:42.872Z,1516712742.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:42.900Z,1516712742.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:43.271Z,1516712743.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:43.305Z,1516712743.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:43.672Z,1516712743.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:43.699Z,1516712743.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:44.092Z,1516712744.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:44.107Z,1516712744.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:44.498Z,1516712744.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:44.517Z,1516712744.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:44.889Z,1516712744.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:44.915Z,1516712744.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:45.286Z,1516712745.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:45.301Z,1516712745.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:45.668Z,1516712745.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:45.694Z,1516712745.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:46.068Z,1516712746.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:46.111Z,1516712746.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:46.484Z,1516712746.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:46.500Z,1516712746.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:46.888Z,1516712746.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:46.905Z,1516712746.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:47.286Z,1516712747.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:47.309Z,1516712747.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:47.696Z,1516712747.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:47.711Z,1516712747.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:48.083Z,1516712748.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:48.106Z,1516712748.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:48.484Z,1516712748.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:48.499Z,1516712748.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:48.885Z,1516712748.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:48.900Z,1516712748.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:49.269Z,1516712749.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:49.301Z,1516712749.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:49.670Z,1516712749.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:49.697Z,1516712749.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:50.096Z,1516712750.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:50.112Z,1516712750.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.188Z,1516712753.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:53.204Z,1516712753.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.206Z,1516712753.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.206Z,1516712753.206 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196 2018-01-23T13:05:53.206Z,1516712753.206 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:05:53.218Z,1516712753.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:05:53.338Z,1516712753.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:53.354Z,1516712753.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.366Z,1516712753.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:05:53.366Z,1516712753.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196 2018-01-23T13:05:53.660Z,1516712753.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:53.697Z,1516712753.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.697Z,1516712753.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196 2018-01-23T13:05:53.697Z,1516712753.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:05:53.703Z,1516712753.703 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:53.703Z,1516712753.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 196 2018-01-23T13:05:53.703Z,1516712753.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:05:53.704Z,1516712753.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:05:53.705Z,1516712753.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:05:53.705Z,1516712753.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:05:53.729Z,1516712753.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:05:53.729Z,1516712753.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:05:54.064Z,1516712754.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:54.122Z,1516712754.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:05:54.122Z,1516712754.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196 2018-01-23T13:05:54.122Z,1516712754.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:05:54.122Z,1516712754.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 196 2018-01-23T13:05:54.456Z,1516712754.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:54.497Z,1516712754.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:05:54.498Z,1516712754.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:05:54.498Z,1516712754.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:05:54.499Z,1516712754.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:05:54.499Z,1516712754.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:05:54.500Z,1516712754.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:05:54.852Z,1516712754.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:54.865Z,1516712754.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x23316 got:0x48218 2018-01-23T13:05:54.885Z,1516712754.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:05:54.886Z,1516712754.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:55.272Z,1516712755.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:55.286Z,1516712755.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:05:55.287Z,1516712755.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:55.667Z,1516712755.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:55.682Z,1516712755.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:05:55.683Z,1516712755.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:56.068Z,1516712756.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:56.085Z,1516712756.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:05:56.086Z,1516712756.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:56.458Z,1516712756.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:56.476Z,1516712756.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:05:56.477Z,1516712756.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:56.859Z,1516712756.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:56.874Z,1516712756.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:05:56.875Z,1516712756.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:57.253Z,1516712757.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:57.287Z,1516712757.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:05:57.288Z,1516712757.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:57.660Z,1516712757.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:57.692Z,1516712757.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:05:57.693Z,1516712757.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:58.068Z,1516712758.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:58.085Z,1516712758.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:05:58.086Z,1516712758.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:58.468Z,1516712758.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:58.489Z,1516712758.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:05:58.490Z,1516712758.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:58.869Z,1516712758.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:58.883Z,1516712758.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:05:58.884Z,1516712758.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:59.246Z,1516712759.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:59.288Z,1516712759.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:05:59.289Z,1516712759.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:05:59.661Z,1516712759.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:05:59.679Z,1516712759.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:05:59.680Z,1516712759.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:00.048Z,1516712760.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:00.087Z,1516712760.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:06:00.088Z,1516712760.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:00.459Z,1516712760.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:00.478Z,1516712760.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:06:00.479Z,1516712760.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:00.848Z,1516712760.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:00.889Z,1516712760.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:06:00.890Z,1516712760.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:01.274Z,1516712761.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:01.289Z,1516712761.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:06:01.290Z,1516712761.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:01.666Z,1516712761.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:01.692Z,1516712761.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:06:01.693Z,1516712761.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:02.070Z,1516712762.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:02.088Z,1516712762.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:06:02.089Z,1516712762.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:02.448Z,1516712762.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:02.488Z,1516712762.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:06:02.489Z,1516712762.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:02.848Z,1516712762.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:02.887Z,1516712762.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:06:02.888Z,1516712762.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:03.268Z,1516712763.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:03.283Z,1516712763.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:06:03.284Z,1516712763.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:03.650Z,1516712763.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:03.688Z,1516712763.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:06:03.689Z,1516712763.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:04.068Z,1516712764.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:04.100Z,1516712764.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:06:04.101Z,1516712764.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:04.477Z,1516712764.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:04.496Z,1516712764.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:06:04.497Z,1516712764.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:04.875Z,1516712764.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:04.890Z,1516712764.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:06:04.891Z,1516712764.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:05.251Z,1516712765.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:05.290Z,1516712765.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:06:05.295Z,1516712765.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:05.672Z,1516712765.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:05.723Z,1516712765.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:06:05.724Z,1516712765.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:06.055Z,1516712766.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:06.096Z,1516712766.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:06:06.097Z,1516712766.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:06.455Z,1516712766.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:06.501Z,1516712766.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:06:06.501Z,1516712766.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:06.861Z,1516712766.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:06.920Z,1516712766.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:06:06.921Z,1516712766.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:07.262Z,1516712767.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:07.316Z,1516712767.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:06:07.317Z,1516712767.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:07.696Z,1516712767.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:07.745Z,1516712767.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:06:07.746Z,1516712767.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:08.068Z,1516712768.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:08.109Z,1516712768.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:06:08.110Z,1516712768.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:08.468Z,1516712768.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:08.501Z,1516712768.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:06:08.502Z,1516712768.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:08.865Z,1516712768.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:08.908Z,1516712768.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:06:08.909Z,1516712768.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:09.258Z,1516712769.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:09.273Z,1516712769.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:06:09.274Z,1516712769.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:09.661Z,1516712769.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:09.680Z,1516712769.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:06:09.681Z,1516712769.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:10.063Z,1516712770.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:10.109Z,1516712770.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:06:10.110Z,1516712770.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:10.477Z,1516712770.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:10.517Z,1516712770.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:06:10.518Z,1516712770.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:10.913Z,1516712770.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:10.970Z,1516712770.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T13:06:10.971Z,1516712770.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:11.259Z,1516712771.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:11.300Z,1516712771.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:06:11.301Z,1516712771.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:11.665Z,1516712771.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:11.686Z,1516712771.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:06:11.711Z,1516712771.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:12.064Z,1516712772.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:12.125Z,1516712772.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:06:12.126Z,1516712772.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:12.490Z,1516712772.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:12.530Z,1516712772.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:06:12.540Z,1516712772.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:12.864Z,1516712772.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:12.901Z,1516712772.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:06:12.902Z,1516712772.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:13.304Z,1516712773.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:13.352Z,1516712773.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T13:06:13.353Z,1516712773.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:13.669Z,1516712773.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:13.715Z,1516712773.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:14.073Z,1516712774.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:14.109Z,1516712774.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:14.458Z,1516712774.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:14.500Z,1516712774.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:14.858Z,1516712774.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:14.885Z,1516712774.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:15.278Z,1516712775.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:15.322Z,1516712775.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:15.663Z,1516712775.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:15.732Z,1516712775.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:16.073Z,1516712776.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:16.096Z,1516712776.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:16.488Z,1516712776.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:16.529Z,1516712776.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:16.870Z,1516712776.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:16.920Z,1516712776.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:17.251Z,1516712777.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:17.277Z,1516712777.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:17.654Z,1516712777.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:17.699Z,1516712777.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:18.061Z,1516712778.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:18.127Z,1516712778.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:18.465Z,1516712778.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:18.531Z,1516712778.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:18.865Z,1516712778.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:18.907Z,1516712778.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:19.257Z,1516712779.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:19.303Z,1516712779.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:19.659Z,1516712779.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:19.716Z,1516712779.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:20.068Z,1516712780.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:20.093Z,1516712780.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:20.481Z,1516712780.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:20.529Z,1516712780.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:20.867Z,1516712780.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:20.882Z,1516712780.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:21.249Z,1516712781.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:21.284Z,1516712781.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:21.649Z,1516712781.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:21.677Z,1516712781.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:22.067Z,1516712782.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:22.082Z,1516712782.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:22.468Z,1516712782.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:22.493Z,1516712782.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:22.872Z,1516712782.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:22.891Z,1516712782.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:23.253Z,1516712783.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:23.280Z,1516712783.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:23.653Z,1516712783.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:23.685Z,1516712783.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:24.063Z,1516712784.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:24.092Z,1516712784.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:24.459Z,1516712784.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:24.489Z,1516712784.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:24.859Z,1516712784.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:24.894Z,1516712784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:25.249Z,1516712785.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:25.293Z,1516712785.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:25.649Z,1516712785.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:25.669Z,1516712785.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:26.067Z,1516712786.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:26.097Z,1516712786.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:26.485Z,1516712786.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:26.499Z,1516712786.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:26.863Z,1516712786.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:26.894Z,1516712786.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:27.257Z,1516712787.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:27.272Z,1516712787.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:27.653Z,1516712787.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:27.680Z,1516712787.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:28.067Z,1516712788.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:28.082Z,1516712788.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:28.471Z,1516712788.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:28.486Z,1516712788.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:28.867Z,1516712788.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:28.882Z,1516712788.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:29.256Z,1516712789.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:29.276Z,1516712789.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:29.653Z,1516712789.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:29.675Z,1516712789.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:30.064Z,1516712790.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:30.091Z,1516712790.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:30.471Z,1516712790.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:30.486Z,1516712790.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:30.867Z,1516712790.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:30.882Z,1516712790.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:31.253Z,1516712791.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:31.284Z,1516712791.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:31.653Z,1516712791.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:31.676Z,1516712791.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:32.066Z,1516712792.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:32.082Z,1516712792.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:32.472Z,1516712792.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:32.487Z,1516712792.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:32.864Z,1516712792.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:32.887Z,1516712792.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:33.250Z,1516712793.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:33.285Z,1516712793.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:33.663Z,1516712793.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:33.687Z,1516712793.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:34.068Z,1516712794.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:34.083Z,1516712794.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:34.468Z,1516712794.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:34.495Z,1516712794.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:34.869Z,1516712794.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:34.885Z,1516712794.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:35.249Z,1516712795.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:35.285Z,1516712795.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:35.653Z,1516712795.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:35.684Z,1516712795.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:36.059Z,1516712796.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:36.089Z,1516712796.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:36.463Z,1516712796.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:36.501Z,1516712796.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:36.859Z,1516712796.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:36.886Z,1516712796.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:37.250Z,1516712797.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:37.289Z,1516712797.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:37.648Z,1516712797.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:37.668Z,1516712797.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:38.067Z,1516712798.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:38.093Z,1516712798.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:38.485Z,1516712798.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:38.501Z,1516712798.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:38.863Z,1516712798.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:38.894Z,1516712798.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:39.261Z,1516712799.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:39.276Z,1516712799.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:39.656Z,1516712799.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:39.681Z,1516712799.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:40.059Z,1516712800.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:40.074Z,1516712800.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:40.463Z,1516712800.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:40.478Z,1516712800.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:40.864Z,1516712800.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:40.879Z,1516712800.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:41.262Z,1516712801.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:41.277Z,1516712801.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:41.653Z,1516712801.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:41.680Z,1516712801.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:42.067Z,1516712802.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:42.083Z,1516712802.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:42.466Z,1516712802.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:42.481Z,1516712802.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:42.866Z,1516712802.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:42.881Z,1516712802.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:43.256Z,1516712803.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:43.278Z,1516712803.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:43.653Z,1516712803.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:43.676Z,1516712803.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:44.068Z,1516712804.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:44.083Z,1516712804.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:44.467Z,1516712804.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:44.482Z,1516712804.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:44.864Z,1516712804.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:44.888Z,1516712804.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:45.267Z,1516712805.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:45.282Z,1516712805.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:45.675Z,1516712805.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:45.711Z,1516712805.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:46.067Z,1516712806.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:46.082Z,1516712806.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:46.496Z,1516712806.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:46.518Z,1516712806.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:46.867Z,1516712806.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:46.882Z,1516712806.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:47.253Z,1516712807.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:47.268Z,1516712807.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:47.657Z,1516712807.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:47.677Z,1516712807.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:48.063Z,1516712808.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:48.078Z,1516712808.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:48.463Z,1516712808.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:48.478Z,1516712808.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:48.863Z,1516712808.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:48.878Z,1516712808.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:49.254Z,1516712809.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:49.269Z,1516712809.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:49.651Z,1516712809.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:49.666Z,1516712809.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:50.060Z,1516712810.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:50.075Z,1516712810.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:50.468Z,1516712810.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:50.482Z,1516712810.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:54.020Z,1516712814.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:54.035Z,1516712814.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:54.141Z,1516712814.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:54.177Z,1516712814.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:54.488Z,1516712814.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:54.525Z,1516712814.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:54.889Z,1516712814.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:54.930Z,1516712814.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:55.285Z,1516712815.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:55.301Z,1516712815.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:55.688Z,1516712815.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:55.730Z,1516712815.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:56.095Z,1516712816.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:56.130Z,1516712816.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:56.491Z,1516712816.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:56.506Z,1516712816.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:56.891Z,1516712816.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:56.906Z,1516712816.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:57.285Z,1516712817.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:57.305Z,1516712817.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:57.711Z,1516712817.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:57.846Z,1516712817.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:58.089Z,1516712818.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:58.133Z,1516712818.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:58.491Z,1516712818.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:58.506Z,1516712818.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:58.890Z,1516712818.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:58.909Z,1516712818.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:59.284Z,1516712819.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:59.302Z,1516712819.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:06:59.685Z,1516712819.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:06:59.700Z,1516712819.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:00.090Z,1516712820.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:00.109Z,1516712820.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:00.491Z,1516712820.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:00.506Z,1516712820.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:00.890Z,1516712820.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:00.905Z,1516712820.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:01.281Z,1516712821.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:01.308Z,1516712821.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:01.692Z,1516712821.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:01.709Z,1516712821.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:02.095Z,1516712822.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:02.110Z,1516712822.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:02.492Z,1516712822.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:02.519Z,1516712822.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:02.894Z,1516712822.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:02.909Z,1516712822.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:03.286Z,1516712823.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:03.301Z,1516712823.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:03.680Z,1516712823.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:03.700Z,1516712823.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:04.093Z,1516712824.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:04.109Z,1516712824.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:04.494Z,1516712824.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:04.517Z,1516712824.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:04.894Z,1516712824.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:04.910Z,1516712824.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:05.280Z,1516712825.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:05.302Z,1516712825.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:05.686Z,1516712825.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:05.705Z,1516712825.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:06.088Z,1516712826.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:06.103Z,1516712826.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:06.494Z,1516712826.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:06.510Z,1516712826.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:06.898Z,1516712826.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:06.920Z,1516712826.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:07.294Z,1516712827.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:07.310Z,1516712827.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:07.680Z,1516712827.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:07.702Z,1516712827.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:08.085Z,1516712828.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:08.105Z,1516712828.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:08.489Z,1516712828.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:08.505Z,1516712828.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:08.880Z,1516712828.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:08.902Z,1516712828.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:09.295Z,1516712829.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:09.311Z,1516712829.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:09.698Z,1516712829.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:09.721Z,1516712829.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:10.098Z,1516712830.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:10.121Z,1516712830.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:10.476Z,1516712830.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:10.504Z,1516712830.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:10.874Z,1516712830.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:10.906Z,1516712830.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:11.276Z,1516712831.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:11.302Z,1516712831.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:11.692Z,1516712831.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:11.707Z,1516712831.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:12.081Z,1516712832.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:12.107Z,1516712832.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:12.492Z,1516712832.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:12.522Z,1516712832.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:12.897Z,1516712832.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:12.919Z,1516712832.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:13.292Z,1516712833.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:13.323Z,1516712833.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:13.676Z,1516712833.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:13.703Z,1516712833.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:14.077Z,1516712834.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:14.116Z,1516712834.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:14.478Z,1516712834.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:14.513Z,1516712834.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:14.877Z,1516712834.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:14.917Z,1516712834.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:15.291Z,1516712835.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:15.319Z,1516712835.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:15.692Z,1516712835.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:15.729Z,1516712835.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:16.096Z,1516712836.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:16.132Z,1516712836.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:16.481Z,1516712836.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:16.522Z,1516712836.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:16.877Z,1516712836.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:16.893Z,1516712836.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:17.284Z,1516712837.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:17.325Z,1516712837.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:17.681Z,1516712837.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:17.697Z,1516712837.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:18.081Z,1516712838.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:18.104Z,1516712838.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:18.487Z,1516712838.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:18.502Z,1516712838.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:18.891Z,1516712838.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:18.906Z,1516712838.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:19.287Z,1516712839.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:19.302Z,1516712839.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:19.684Z,1516712839.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:19.698Z,1516712839.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:20.085Z,1516712840.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:20.100Z,1516712840.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:20.482Z,1516712840.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:20.505Z,1516712840.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:20.889Z,1516712840.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:20.904Z,1516712840.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:21.303Z,1516712841.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:21.318Z,1516712841.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:21.695Z,1516712841.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:21.710Z,1516712841.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:22.090Z,1516712842.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:22.113Z,1516712842.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:22.486Z,1516712842.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:22.501Z,1516712842.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:22.880Z,1516712842.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:22.913Z,1516712842.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:23.289Z,1516712843.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:23.309Z,1516712843.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:23.687Z,1516712843.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:23.709Z,1516712843.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:24.077Z,1516712844.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:24.113Z,1516712844.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:24.487Z,1516712844.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:24.514Z,1516712844.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:24.901Z,1516712844.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:24.920Z,1516712844.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:25.288Z,1516712845.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:25.325Z,1516712845.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:25.681Z,1516712845.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:25.717Z,1516712845.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:26.076Z,1516712846.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:26.122Z,1516712846.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:26.481Z,1516712846.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:26.517Z,1516712846.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:26.884Z,1516712846.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:26.921Z,1516712846.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:27.287Z,1516712847.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:27.322Z,1516712847.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:27.695Z,1516712847.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:27.729Z,1516712847.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:28.087Z,1516712848.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:28.122Z,1516712848.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:28.484Z,1516712848.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:28.499Z,1516712848.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:28.876Z,1516712848.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:28.890Z,1516712848.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:29.288Z,1516712849.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:29.324Z,1516712849.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:29.689Z,1516712849.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:29.728Z,1516712849.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:30.084Z,1516712850.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:30.121Z,1516712850.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:30.499Z,1516712850.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:30.524Z,1516712850.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:30.903Z,1516712850.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:30.929Z,1516712850.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:31.291Z,1516712851.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:31.306Z,1516712851.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:31.681Z,1516712851.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:31.708Z,1516712851.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:32.087Z,1516712852.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:32.101Z,1516712852.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:32.487Z,1516712852.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:32.502Z,1516712852.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:32.883Z,1516712852.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:32.903Z,1516712852.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:33.288Z,1516712853.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:33.303Z,1516712853.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:33.692Z,1516712853.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:33.707Z,1516712853.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:34.088Z,1516712854.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:34.103Z,1516712854.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:34.484Z,1516712854.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:34.501Z,1516712854.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:34.880Z,1516712854.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:34.907Z,1516712854.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:35.284Z,1516712855.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:35.300Z,1516712855.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:35.686Z,1516712855.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:35.732Z,1516712855.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:36.088Z,1516712856.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:36.103Z,1516712856.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:36.489Z,1516712856.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:36.509Z,1516712856.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:36.895Z,1516712856.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:36.910Z,1516712856.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:37.290Z,1516712857.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:37.309Z,1516712857.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:37.687Z,1516712857.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:37.702Z,1516712857.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:38.085Z,1516712858.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:38.100Z,1516712858.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:38.481Z,1516712858.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:38.502Z,1516712858.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:38.884Z,1516712858.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:38.899Z,1516712858.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:39.290Z,1516712859.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:39.305Z,1516712859.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:39.691Z,1516712859.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:39.706Z,1516712859.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:40.090Z,1516712860.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:40.109Z,1516712860.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:40.485Z,1516712860.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:40.500Z,1516712860.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:40.877Z,1516712860.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:40.904Z,1516712860.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:41.284Z,1516712861.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:41.302Z,1516712861.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:41.686Z,1516712861.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:41.700Z,1516712861.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:42.078Z,1516712862.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:42.105Z,1516712862.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:42.498Z,1516712862.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:42.513Z,1516712862.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:42.899Z,1516712862.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:42.921Z,1516712862.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:43.295Z,1516712863.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:43.310Z,1516712863.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:43.680Z,1516712863.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:43.702Z,1516712863.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:44.086Z,1516712864.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:44.108Z,1516712864.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:44.489Z,1516712864.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:44.505Z,1516712864.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:44.880Z,1516712864.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:44.901Z,1516712864.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:45.296Z,1516712865.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:45.311Z,1516712865.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:45.698Z,1516712865.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:45.717Z,1516712865.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:46.095Z,1516712866.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:46.110Z,1516712866.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:46.485Z,1516712866.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:46.504Z,1516712866.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:46.874Z,1516712866.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:46.901Z,1516712866.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:47.284Z,1516712867.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:47.302Z,1516712867.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:47.681Z,1516712867.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:47.708Z,1516712867.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:48.076Z,1516712868.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:48.109Z,1516712868.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:48.499Z,1516712868.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:48.514Z,1516712868.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:48.901Z,1516712868.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:48.928Z,1516712868.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:49.287Z,1516712869.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:49.321Z,1516712869.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:49.676Z,1516712869.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:49.712Z,1516712869.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:50.077Z,1516712870.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:50.117Z,1516712870.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:50.478Z,1516712870.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:50.493Z,1516712870.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:53.577Z,1516712873.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:53.592Z,1516712873.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:53.710Z,1516712873.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:53.745Z,1516712873.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:54.079Z,1516712874.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:54.094Z,1516712874.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:54.480Z,1516712874.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:54.494Z,1516712874.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:54.873Z,1516712874.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:54.893Z,1516712874.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:55.268Z,1516712875.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:55.289Z,1516712875.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:55.670Z,1516712875.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:55.685Z,1516712875.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:56.068Z,1516712876.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:56.084Z,1516712876.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:56.474Z,1516712876.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:56.501Z,1516712876.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:56.882Z,1516712876.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:56.897Z,1516712876.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:57.279Z,1516712877.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:57.294Z,1516712877.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:57.664Z,1516712877.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:57.686Z,1516712877.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:58.070Z,1516712878.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:58.088Z,1516712878.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:58.465Z,1516712878.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:58.488Z,1516712878.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:58.864Z,1516712878.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:58.887Z,1516712878.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:59.281Z,1516712879.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:59.296Z,1516712879.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:07:59.683Z,1516712879.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:07:59.698Z,1516712879.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:00.083Z,1516712880.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:00.098Z,1516712880.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:00.467Z,1516712880.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:00.498Z,1516712880.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:00.858Z,1516712880.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:00.890Z,1516712880.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:01.261Z,1516712881.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:01.288Z,1516712881.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:01.662Z,1516712881.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:01.699Z,1516712881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:02.061Z,1516712882.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:02.097Z,1516712882.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:02.484Z,1516712882.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:02.499Z,1516712882.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:02.886Z,1516712882.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:02.900Z,1516712882.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:03.276Z,1516712883.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:03.307Z,1516712883.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:03.660Z,1516712883.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:03.687Z,1516712883.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:04.060Z,1516712884.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:04.101Z,1516712884.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:04.465Z,1516712884.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:04.492Z,1516712884.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:04.860Z,1516712884.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:04.887Z,1516712884.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:05.278Z,1516712885.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:05.304Z,1516712885.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:05.678Z,1516712885.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:05.702Z,1516712885.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:06.076Z,1516712886.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:06.098Z,1516712886.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:06.460Z,1516712886.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:06.489Z,1516712886.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:06.860Z,1516712886.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:06.893Z,1516712886.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:07.260Z,1516712887.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:07.297Z,1516712887.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:07.661Z,1516712887.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:07.676Z,1516712887.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:08.061Z,1516712888.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:08.076Z,1516712888.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:08.479Z,1516712888.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:08.506Z,1516712888.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:08.879Z,1516712888.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:08.914Z,1516712888.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:09.275Z,1516712889.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:09.306Z,1516712889.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:09.669Z,1516712889.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:09.689Z,1516712889.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:10.069Z,1516712890.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:10.084Z,1516712890.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:10.466Z,1516712890.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:10.490Z,1516712890.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:10.866Z,1516712890.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:10.891Z,1516712890.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:11.274Z,1516712891.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:11.290Z,1516712891.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:11.673Z,1516712891.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:11.689Z,1516712891.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:12.074Z,1516712892.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:12.089Z,1516712892.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:12.469Z,1516712892.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:12.484Z,1516712892.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:12.868Z,1516712892.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:12.883Z,1516712892.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:13.268Z,1516712893.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:13.283Z,1516712893.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:13.670Z,1516712893.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:13.684Z,1516712893.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:14.068Z,1516712894.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:14.083Z,1516712894.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:14.473Z,1516712894.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:14.493Z,1516712894.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:14.874Z,1516712894.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:14.889Z,1516712894.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:15.274Z,1516712895.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:15.293Z,1516712895.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:15.668Z,1516712895.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:15.683Z,1516712895.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:16.069Z,1516712896.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:16.084Z,1516712896.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:16.468Z,1516712896.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:16.486Z,1516712896.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:16.868Z,1516712896.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:16.883Z,1516712896.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:17.274Z,1516712897.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:17.296Z,1516712897.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:17.674Z,1516712897.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:17.693Z,1516712897.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:18.075Z,1516712898.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:18.090Z,1516712898.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:18.469Z,1516712898.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:18.484Z,1516712898.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:18.868Z,1516712898.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:18.883Z,1516712898.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:19.273Z,1516712899.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:19.288Z,1516712899.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:19.670Z,1516712899.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:19.685Z,1516712899.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:20.068Z,1516712900.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:20.083Z,1516712900.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:20.477Z,1516712900.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:20.497Z,1516712900.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:20.878Z,1516712900.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:20.893Z,1516712900.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:21.276Z,1516712901.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:21.303Z,1516712901.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:21.672Z,1516712901.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:21.687Z,1516712901.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:22.070Z,1516712902.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:22.092Z,1516712902.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:22.468Z,1516712902.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:22.488Z,1516712902.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:22.863Z,1516712902.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:22.894Z,1516712902.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:23.280Z,1516712903.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:23.295Z,1516712903.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:23.678Z,1516712903.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:23.693Z,1516712903.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:24.078Z,1516712904.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:24.093Z,1516712904.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:24.467Z,1516712904.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:24.493Z,1516712904.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:24.858Z,1516712904.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:24.886Z,1516712904.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:25.272Z,1516712905.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:25.290Z,1516712905.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:25.661Z,1516712905.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:25.689Z,1516712905.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:26.072Z,1516712906.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:26.090Z,1516712906.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:26.479Z,1516712906.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:26.494Z,1516712906.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:26.883Z,1516712906.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:26.898Z,1516712906.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:27.279Z,1516712907.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:27.294Z,1516712907.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:27.684Z,1516712907.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:27.698Z,1516712907.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:28.060Z,1516712908.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:28.088Z,1516712908.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:28.461Z,1516712908.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:28.488Z,1516712908.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:28.859Z,1516712908.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:28.893Z,1516712908.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:29.287Z,1516712909.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:29.302Z,1516712909.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:29.676Z,1516712909.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:29.697Z,1516712909.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:30.080Z,1516712910.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:30.095Z,1516712910.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:30.461Z,1516712910.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:30.501Z,1516712910.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:30.858Z,1516712910.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:30.894Z,1516712910.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:31.276Z,1516712911.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:31.303Z,1516712911.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:31.687Z,1516712911.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:31.702Z,1516712911.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:32.084Z,1516712912.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:32.099Z,1516712912.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:32.462Z,1516712912.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:32.488Z,1516712912.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:32.861Z,1516712912.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:32.902Z,1516712912.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:33.276Z,1516712913.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:33.298Z,1516712913.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:33.687Z,1516712913.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:33.702Z,1516712913.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:34.080Z,1516712914.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:34.095Z,1516712914.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:34.461Z,1516712914.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:34.497Z,1516712914.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:34.860Z,1516712914.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:34.887Z,1516712914.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:35.279Z,1516712915.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:35.301Z,1516712915.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:35.677Z,1516712915.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:35.705Z,1516712915.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:36.075Z,1516712916.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:36.102Z,1516712916.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:36.461Z,1516712916.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:36.506Z,1516712916.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:36.858Z,1516712916.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:36.873Z,1516712916.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:37.271Z,1516712917.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:37.306Z,1516712917.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:37.683Z,1516712917.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:37.711Z,1516712917.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:38.079Z,1516712918.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:38.106Z,1516712918.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:38.473Z,1516712918.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:38.504Z,1516712918.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:38.865Z,1516712918.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:38.880Z,1516712918.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:39.248Z,1516712919.248 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T13:08:39.248Z,1516712919.248 [NAL9602] Data Fault, FailCount= 4 2018-01-23T13:08:39.248Z,1516712919.248 [NAL9602](ERROR): Data Fault 2018-01-23T13:08:39.265Z,1516712919.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:39.281Z,1516712919.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:39.314Z,1516712919.314 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T13:08:39.648Z,1516712919.648 [NAL9602](INFO): Powering down 2018-01-23T13:08:39.665Z,1516712919.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:39.692Z,1516712919.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:40.069Z,1516712920.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:40.084Z,1516712920.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:40.467Z,1516712920.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:40.482Z,1516712920.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:40.495Z,1516712920.495 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T13:08:40.495Z,1516712920.495 [NAL9602] No Fault, FailCount= 4 2018-01-23T13:08:40.864Z,1516712920.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:40.897Z,1516712920.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:41.273Z,1516712921.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:41.287Z,1516712921.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:41.668Z,1516712921.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:41.683Z,1516712921.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:42.069Z,1516712922.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:42.084Z,1516712922.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:42.468Z,1516712922.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:42.483Z,1516712922.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:42.865Z,1516712922.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:42.881Z,1516712922.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:43.267Z,1516712923.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:43.283Z,1516712923.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:43.667Z,1516712923.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:43.683Z,1516712923.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:44.068Z,1516712924.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:44.084Z,1516712924.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:44.468Z,1516712924.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:44.484Z,1516712924.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:44.868Z,1516712924.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:44.883Z,1516712924.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:45.265Z,1516712925.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:45.281Z,1516712925.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:45.677Z,1516712925.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:45.692Z,1516712925.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:46.068Z,1516712926.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:46.083Z,1516712926.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:46.465Z,1516712926.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:46.481Z,1516712926.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:46.877Z,1516712926.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:46.896Z,1516712926.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:47.273Z,1516712927.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:47.288Z,1516712927.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:47.665Z,1516712927.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:47.685Z,1516712927.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:48.068Z,1516712928.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:48.083Z,1516712928.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:48.468Z,1516712928.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:48.483Z,1516712928.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:48.868Z,1516712928.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:48.884Z,1516712928.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:49.268Z,1516712929.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:49.283Z,1516712929.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:49.668Z,1516712929.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:49.683Z,1516712929.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:50.068Z,1516712930.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:50.083Z,1516712930.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:50.467Z,1516712930.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:50.482Z,1516712930.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:50.869Z,1516712930.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:50.884Z,1516712930.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:53.963Z,1516712933.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:53.978Z,1516712933.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:53.980Z,1516712933.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:53.980Z,1516712933.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197 2018-01-23T13:08:53.981Z,1516712933.981 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:08:53.992Z,1516712933.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:08:54.101Z,1516712934.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:54.134Z,1516712934.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:54.147Z,1516712934.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:08:54.148Z,1516712934.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197 2018-01-23T13:08:54.428Z,1516712934.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:54.442Z,1516712934.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:54.444Z,1516712934.444 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:08:54.444Z,1516712934.444 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:08:54.445Z,1516712934.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:08:54.831Z,1516712934.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:54.846Z,1516712934.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:54.846Z,1516712934.846 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197 2018-01-23T13:08:54.846Z,1516712934.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:08:54.848Z,1516712934.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:54.848Z,1516712934.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 197 2018-01-23T13:08:54.848Z,1516712934.848 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:08:54.884Z,1516712934.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:08:54.884Z,1516712934.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:08:55.227Z,1516712935.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:55.253Z,1516712935.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:08:55.253Z,1516712935.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197 2018-01-23T13:08:55.254Z,1516712935.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:08:55.254Z,1516712935.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 197 2018-01-23T13:08:55.626Z,1516712935.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:55.657Z,1516712935.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:08:55.658Z,1516712935.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:08:55.658Z,1516712935.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:08:55.658Z,1516712935.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:08:55.659Z,1516712935.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:08:55.659Z,1516712935.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:08:56.028Z,1516712936.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:56.052Z,1516712936.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:08:56.053Z,1516712936.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:56.425Z,1516712936.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:56.440Z,1516712936.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:08:56.441Z,1516712936.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:56.837Z,1516712936.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:56.852Z,1516712936.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:08:56.853Z,1516712936.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:57.228Z,1516712937.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:57.242Z,1516712937.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:08:57.243Z,1516712937.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:57.628Z,1516712937.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:57.643Z,1516712937.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:08:57.644Z,1516712937.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:58.022Z,1516712938.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:58.055Z,1516712938.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:08:58.056Z,1516712938.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:58.428Z,1516712938.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:58.442Z,1516712938.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:08:58.443Z,1516712938.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:58.828Z,1516712938.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:58.842Z,1516712938.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:08:58.843Z,1516712938.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:59.222Z,1516712939.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:59.254Z,1516712939.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:08:59.256Z,1516712939.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:08:59.628Z,1516712939.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:08:59.652Z,1516712939.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:08:59.661Z,1516712939.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:00.030Z,1516712940.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:00.045Z,1516712940.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:09:00.046Z,1516712940.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:00.422Z,1516712940.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:00.455Z,1516712940.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:09:00.456Z,1516712940.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:00.828Z,1516712940.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:00.842Z,1516712940.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:09:00.843Z,1516712940.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:01.224Z,1516712941.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:01.243Z,1516712941.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:09:01.244Z,1516712941.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:01.622Z,1516712941.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:01.653Z,1516712941.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:09:01.654Z,1516712941.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:02.028Z,1516712942.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:02.042Z,1516712942.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:09:02.043Z,1516712942.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:02.428Z,1516712942.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:02.442Z,1516712942.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:09:02.443Z,1516712942.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:02.822Z,1516712942.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:02.854Z,1516712942.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:09:02.856Z,1516712942.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:03.228Z,1516712943.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:03.242Z,1516712943.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:09:03.243Z,1516712943.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:03.624Z,1516712943.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:03.643Z,1516712943.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:09:03.644Z,1516712943.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:04.022Z,1516712944.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:04.055Z,1516712944.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:09:04.056Z,1516712944.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:04.428Z,1516712944.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:04.442Z,1516712944.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:09:04.443Z,1516712944.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:04.828Z,1516712944.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:04.842Z,1516712944.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:09:04.844Z,1516712944.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:05.222Z,1516712945.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:05.255Z,1516712945.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:09:05.256Z,1516712945.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:05.628Z,1516712945.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:05.652Z,1516712945.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:09:05.653Z,1516712945.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:06.030Z,1516712946.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:06.045Z,1516712946.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:09:06.046Z,1516712946.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:06.436Z,1516712946.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:06.451Z,1516712946.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:09:06.452Z,1516712946.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:06.828Z,1516712946.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:06.843Z,1516712946.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:09:06.844Z,1516712946.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:07.224Z,1516712947.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:07.244Z,1516712947.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:09:07.245Z,1516712947.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:07.638Z,1516712947.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:07.653Z,1516712947.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:09:07.654Z,1516712947.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:08.029Z,1516712948.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:08.043Z,1516712948.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:09:08.044Z,1516712948.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:08.424Z,1516712948.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:08.444Z,1516712948.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:09:08.445Z,1516712948.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:08.824Z,1516712948.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:08.847Z,1516712948.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:09:08.848Z,1516712948.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:09.228Z,1516712949.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:09.243Z,1516712949.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:09:09.244Z,1516712949.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:09.628Z,1516712949.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:09.643Z,1516712949.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:09:09.644Z,1516712949.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:10.004Z,1516712950.004 [NAL9602](INFO): Powering up NAL9602 2018-01-23T13:09:10.024Z,1516712950.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:10.046Z,1516712950.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:09:10.051Z,1516712950.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:10.428Z,1516712950.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:10.443Z,1516712950.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:09:10.444Z,1516712950.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:10.817Z,1516712950.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:10.849Z,1516712950.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:09:10.850Z,1516712950.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:11.232Z,1516712951.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:11.250Z,1516712951.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:09:11.252Z,1516712951.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:11.620Z,1516712951.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:11.653Z,1516712951.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:09:11.654Z,1516712951.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:12.020Z,1516712952.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:12.043Z,1516712952.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:09:12.044Z,1516712952.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:12.419Z,1516712952.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:12.434Z,1516712952.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:09:12.435Z,1516712952.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:12.820Z,1516712952.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:12.840Z,1516712952.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:09:12.841Z,1516712952.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:13.225Z,1516712953.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:13.239Z,1516712953.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:09:13.240Z,1516712953.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:13.625Z,1516712953.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:13.641Z,1516712953.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:09:13.641Z,1516712953.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:14.024Z,1516712954.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:14.051Z,1516712954.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:09:14.052Z,1516712954.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:14.426Z,1516712954.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:14.441Z,1516712954.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:09:14.442Z,1516712954.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:14.826Z,1516712954.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:14.841Z,1516712954.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:09:14.842Z,1516712954.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:15.225Z,1516712955.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:15.252Z,1516712955.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:15.625Z,1516712955.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:15.640Z,1516712955.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:16.033Z,1516712956.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:16.048Z,1516712956.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:16.427Z,1516712956.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:16.448Z,1516712956.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:16.825Z,1516712956.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:16.841Z,1516712956.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:17.228Z,1516712957.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:17.246Z,1516712957.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:17.627Z,1516712957.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:17.643Z,1516712957.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:18.027Z,1516712958.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:18.044Z,1516712958.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:18.429Z,1516712958.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:18.460Z,1516712958.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:18.825Z,1516712958.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:18.840Z,1516712958.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:19.223Z,1516712959.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:19.238Z,1516712959.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:19.625Z,1516712959.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:19.640Z,1516712959.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:20.032Z,1516712960.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:20.047Z,1516712960.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:20.435Z,1516712960.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:20.450Z,1516712960.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:20.816Z,1516712960.816 [NAL9602](INFO): NAL9602 initialized 2018-01-23T13:09:20.833Z,1516712960.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:20.853Z,1516712960.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:21.229Z,1516712961.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:21.244Z,1516712961.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:21.631Z,1516712961.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:21.647Z,1516712961.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:22.035Z,1516712962.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:22.050Z,1516712962.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:22.432Z,1516712962.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:22.452Z,1516712962.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:22.828Z,1516712962.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:22.844Z,1516712962.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:23.229Z,1516712963.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:23.244Z,1516712963.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:23.628Z,1516712963.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:23.644Z,1516712963.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:24.044Z,1516712964.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:24.075Z,1516712964.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:24.449Z,1516712964.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:24.482Z,1516712964.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:24.833Z,1516712964.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:24.856Z,1516712964.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:25.227Z,1516712965.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:25.242Z,1516712965.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:25.624Z,1516712965.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:25.654Z,1516712965.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:26.034Z,1516712966.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:26.048Z,1516712966.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:26.427Z,1516712966.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:26.442Z,1516712966.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:26.833Z,1516712966.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:26.853Z,1516712966.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:27.235Z,1516712967.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:27.250Z,1516712967.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:27.635Z,1516712967.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:27.651Z,1516712967.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:28.034Z,1516712968.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:28.049Z,1516712968.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:28.426Z,1516712968.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:28.455Z,1516712968.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:28.827Z,1516712968.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:28.842Z,1516712968.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:29.234Z,1516712969.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:29.249Z,1516712969.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:29.633Z,1516712969.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:29.660Z,1516712969.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:30.035Z,1516712970.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:30.051Z,1516712970.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:30.435Z,1516712970.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:30.450Z,1516712970.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:30.835Z,1516712970.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:30.856Z,1516712970.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:31.229Z,1516712971.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:31.245Z,1516712971.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:31.628Z,1516712971.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:31.643Z,1516712971.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:32.029Z,1516712972.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:32.043Z,1516712972.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:32.432Z,1516712972.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:32.447Z,1516712972.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:32.848Z,1516712972.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:32.862Z,1516712972.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:33.243Z,1516712973.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:33.258Z,1516712973.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:33.639Z,1516712973.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:33.654Z,1516712973.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:34.029Z,1516712974.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:34.044Z,1516712974.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:34.437Z,1516712974.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:34.452Z,1516712974.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:34.831Z,1516712974.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:34.846Z,1516712974.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:35.224Z,1516712975.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:35.242Z,1516712975.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:35.631Z,1516712975.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:35.653Z,1516712975.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:36.044Z,1516712976.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:36.059Z,1516712976.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:36.444Z,1516712976.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:36.465Z,1516712976.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:36.840Z,1516712976.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:36.860Z,1516712976.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:37.231Z,1516712977.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:37.250Z,1516712977.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:37.622Z,1516712977.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:37.657Z,1516712977.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:38.037Z,1516712978.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:38.052Z,1516712978.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:38.418Z,1516712978.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:38.437Z,1516712978.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:38.837Z,1516712978.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:38.859Z,1516712978.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:39.242Z,1516712979.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:39.266Z,1516712979.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:39.639Z,1516712979.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:39.671Z,1516712979.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:40.025Z,1516712980.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:40.040Z,1516712980.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:40.427Z,1516712980.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:40.443Z,1516712980.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:40.829Z,1516712980.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:40.844Z,1516712980.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:41.233Z,1516712981.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:41.248Z,1516712981.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:41.632Z,1516712981.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:41.653Z,1516712981.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:42.033Z,1516712982.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:42.049Z,1516712982.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:42.447Z,1516712982.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:42.478Z,1516712982.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:42.847Z,1516712982.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:42.879Z,1516712982.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:43.231Z,1516712983.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:43.246Z,1516712983.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:43.624Z,1516712983.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:43.649Z,1516712983.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:44.037Z,1516712984.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:44.052Z,1516712984.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:44.432Z,1516712984.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:44.447Z,1516712984.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:44.851Z,1516712984.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:44.883Z,1516712984.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:45.246Z,1516712985.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:45.261Z,1516712985.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:45.640Z,1516712985.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:45.668Z,1516712985.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:46.033Z,1516712986.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:46.052Z,1516712986.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:46.437Z,1516712986.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:46.452Z,1516712986.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:46.821Z,1516712986.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:46.853Z,1516712986.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:47.224Z,1516712987.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:47.257Z,1516712987.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:47.622Z,1516712987.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:47.661Z,1516712987.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:48.049Z,1516712988.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:48.064Z,1516712988.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:48.441Z,1516712988.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:48.465Z,1516712988.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:48.834Z,1516712988.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:48.870Z,1516712988.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:49.223Z,1516712989.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:49.251Z,1516712989.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:49.625Z,1516712989.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:49.676Z,1516712989.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:49.680Z,1516712989.680 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:04:49.3Z 2018-01-23T13:09:49.680Z,1516712989.680 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T13:09:49.680Z,1516712989.680 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T13:09:50.021Z,1516712990.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:50.064Z,1516712990.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:50.555Z,1516712990.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:50.570Z,1516712990.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:50.832Z,1516712990.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:50.859Z,1516712990.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:53.935Z,1516712993.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:53.961Z,1516712993.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:54.042Z,1516712994.042 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0232.lzma 2018-01-23T13:09:54.077Z,1516712994.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:54.110Z,1516712994.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:54.418Z,1516712994.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:54.434Z,1516712994.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:54.785Z,1516712994.785 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0232.lzma.bak 2018-01-23T13:09:54.786Z,1516712994.786 [DataOverHttps](INFO): SBD MOMSN=7755617 2018-01-23T13:09:54.832Z,1516712994.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:54.865Z,1516712994.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:55.456Z,1516712995.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:55.464Z,1516712995.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x14364 got:0x6466 2018-01-23T13:09:55.489Z,1516712995.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:55.618Z,1516712995.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:55.637Z,1516712995.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:58.719Z,1516712998.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:58.735Z,1516712998.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:58.852Z,1516712998.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:58.874Z,1516712998.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:59.226Z,1516712999.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:59.241Z,1516712999.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:09:59.619Z,1516712999.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:09:59.647Z,1516712999.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:00.010Z,1516713000.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:00.044Z,1516713000.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:00.415Z,1516713000.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:00.433Z,1516713000.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:03.572Z,1516713003.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:03.587Z,1516713003.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:03.667Z,1516713003.667 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0233.lzma 2018-01-23T13:10:03.699Z,1516713003.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:03.737Z,1516713003.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:04.048Z,1516713004.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:04.081Z,1516713004.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:04.416Z,1516713004.416 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0233.lzma.bak 2018-01-23T13:10:04.416Z,1516713004.416 [DataOverHttps](INFO): SBD MOMSN=7755619 2018-01-23T13:10:04.445Z,1516713004.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:04.483Z,1516713004.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:05.079Z,1516713005.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:05.086Z,1516713005.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x25454 got:0x48897 2018-01-23T13:10:05.125Z,1516713005.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:05.128Z,1516713005.128 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T13:10:05.128Z,1516713005.128 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T13:10:05.128Z,1516713005.128 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T13:10:05.239Z,1516713005.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:05.272Z,1516713005.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:08.391Z,1516713008.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:08.430Z,1516713008.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:08.526Z,1516713008.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:08.549Z,1516713008.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:08.892Z,1516713008.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:08.915Z,1516713008.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:09.286Z,1516713009.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:09.302Z,1516713009.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:09.689Z,1516713009.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:09.709Z,1516713009.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:10.090Z,1516713010.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:10.113Z,1516713010.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:10.489Z,1516713010.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:10.504Z,1516713010.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:10.892Z,1516713010.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:10.910Z,1516713010.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:11.303Z,1516713011.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:11.337Z,1516713011.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:11.691Z,1516713011.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:11.713Z,1516713011.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:12.086Z,1516713012.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:12.101Z,1516713012.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:12.482Z,1516713012.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:12.509Z,1516713012.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:12.893Z,1516713012.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:12.908Z,1516713012.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:13.292Z,1516713013.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:13.313Z,1516713013.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:13.682Z,1516713013.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:13.709Z,1516713013.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:14.099Z,1516713014.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:14.114Z,1516713014.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:14.499Z,1516713014.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:14.514Z,1516713014.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:14.902Z,1516713014.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:14.925Z,1516713014.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:15.276Z,1516713015.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:15.328Z,1516713015.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:15.678Z,1516713015.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:15.712Z,1516713015.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:16.080Z,1516713016.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:16.111Z,1516713016.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:16.481Z,1516713016.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:16.519Z,1516713016.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:16.888Z,1516713016.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:16.923Z,1516713016.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:17.299Z,1516713017.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:17.329Z,1516713017.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:17.711Z,1516713017.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:17.726Z,1516713017.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:18.082Z,1516713018.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:18.097Z,1516713018.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:18.489Z,1516713018.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:18.529Z,1516713018.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:18.888Z,1516713018.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:18.903Z,1516713018.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:19.284Z,1516713019.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:19.311Z,1516713019.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:19.685Z,1516713019.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:19.701Z,1516713019.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:20.091Z,1516713020.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:20.106Z,1516713020.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:20.497Z,1516713020.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:20.517Z,1516713020.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:20.896Z,1516713020.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:20.911Z,1516713020.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:21.287Z,1516713021.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:21.302Z,1516713021.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:21.692Z,1516713021.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:21.713Z,1516713021.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:22.092Z,1516713022.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:22.107Z,1516713022.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:22.489Z,1516713022.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:22.503Z,1516713022.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:22.894Z,1516713022.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:22.917Z,1516713022.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:23.299Z,1516713023.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:23.314Z,1516713023.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:23.699Z,1516713023.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:23.713Z,1516713023.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:24.088Z,1516713024.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:24.103Z,1516713024.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:24.481Z,1516713024.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:24.504Z,1516713024.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:24.890Z,1516713024.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:24.905Z,1516713024.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:25.284Z,1516713025.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:25.314Z,1516713025.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:25.678Z,1516713025.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:25.713Z,1516713025.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:26.096Z,1516713026.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:26.111Z,1516713026.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:26.502Z,1516713026.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:26.521Z,1516713026.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:26.898Z,1516713026.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:26.913Z,1516713026.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:27.276Z,1516713027.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:27.316Z,1516713027.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:27.690Z,1516713027.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:27.705Z,1516713027.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:28.083Z,1516713028.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:28.106Z,1516713028.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:28.476Z,1516713028.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:28.509Z,1516713028.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:28.903Z,1516713028.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:28.918Z,1516713028.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:29.299Z,1516713029.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:29.320Z,1516713029.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:29.703Z,1516713029.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:29.717Z,1516713029.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:30.077Z,1516713030.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:30.120Z,1516713030.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:30.488Z,1516713030.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:30.503Z,1516713030.503 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T13:10:30.542Z,1516713030.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:30.878Z,1516713030.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:30.908Z,1516713030.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:31.288Z,1516713031.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:31.303Z,1516713031.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:31.676Z,1516713031.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:31.717Z,1516713031.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:32.104Z,1516713032.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:32.118Z,1516713032.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:32.503Z,1516713032.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:32.518Z,1516713032.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:32.890Z,1516713032.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:32.935Z,1516713032.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:33.315Z,1516713033.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:33.423Z,1516713033.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:33.691Z,1516713033.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:33.708Z,1516713033.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:34.078Z,1516713034.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:34.109Z,1516713034.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:34.489Z,1516713034.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:34.504Z,1516713034.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:34.897Z,1516713034.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:34.937Z,1516713034.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:35.302Z,1516713035.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:35.309Z,1516713035.309 [PNI_TCM](ERROR): CRC does not match. Expected:0x40862 got:0x2589 2018-01-23T13:10:35.349Z,1516713035.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:35.693Z,1516713035.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:35.736Z,1516713035.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:36.115Z,1516713036.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:36.146Z,1516713036.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:36.476Z,1516713036.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:36.513Z,1516713036.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:36.876Z,1516713036.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:36.920Z,1516713036.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:37.277Z,1516713037.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:37.308Z,1516713037.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:37.695Z,1516713037.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:37.710Z,1516713037.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:38.093Z,1516713038.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:38.121Z,1516713038.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:38.487Z,1516713038.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:38.507Z,1516713038.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:38.894Z,1516713038.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:38.941Z,1516713038.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:39.290Z,1516713039.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:39.309Z,1516713039.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:39.683Z,1516713039.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:39.712Z,1516713039.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:40.084Z,1516713040.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:40.108Z,1516713040.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:40.482Z,1516713040.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:40.518Z,1516713040.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:40.895Z,1516713040.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:40.914Z,1516713040.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:41.298Z,1516713041.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:41.339Z,1516713041.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:41.696Z,1516713041.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:41.720Z,1516713041.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:42.088Z,1516713042.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:42.112Z,1516713042.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:42.475Z,1516713042.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:42.512Z,1516713042.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:42.875Z,1516713042.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:42.909Z,1516713042.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:43.303Z,1516713043.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:43.356Z,1516713043.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:43.684Z,1516713043.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:43.721Z,1516713043.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:44.089Z,1516713044.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:44.126Z,1516713044.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:44.488Z,1516713044.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:44.567Z,1516713044.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:44.888Z,1516713044.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:44.933Z,1516713044.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:45.281Z,1516713045.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:45.318Z,1516713045.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:45.676Z,1516713045.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:45.717Z,1516713045.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:46.077Z,1516713046.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:46.093Z,1516713046.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:46.478Z,1516713046.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:46.493Z,1516713046.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:46.892Z,1516713046.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:46.925Z,1516713046.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:47.298Z,1516713047.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:47.327Z,1516713047.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:47.700Z,1516713047.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:47.744Z,1516713047.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:48.081Z,1516713048.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:48.126Z,1516713048.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:48.488Z,1516713048.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:48.532Z,1516713048.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:48.885Z,1516713048.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:48.904Z,1516713048.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:49.282Z,1516713049.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:49.297Z,1516713049.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:49.680Z,1516713049.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:49.720Z,1516713049.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:50.096Z,1516713050.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:50.115Z,1516713050.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:50.493Z,1516713050.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:50.517Z,1516713050.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:50.892Z,1516713050.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:50.926Z,1516713050.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:51.280Z,1516713051.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:51.308Z,1516713051.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:51.676Z,1516713051.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:51.703Z,1516713051.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:52.077Z,1516713052.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:52.115Z,1516713052.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:52.476Z,1516713052.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:52.504Z,1516713052.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:52.895Z,1516713052.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:52.910Z,1516713052.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:53.299Z,1516713053.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:53.318Z,1516713053.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:53.690Z,1516713053.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:53.726Z,1516713053.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:54.080Z,1516713054.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:54.106Z,1516713054.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:54.476Z,1516713054.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:54.502Z,1516713054.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:54.879Z,1516713054.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:54.920Z,1516713054.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:55.277Z,1516713055.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:55.306Z,1516713055.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:55.692Z,1516713055.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:55.710Z,1516713055.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:56.094Z,1516713056.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:56.118Z,1516713056.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:56.494Z,1516713056.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:56.521Z,1516713056.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:56.899Z,1516713056.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:56.918Z,1516713056.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:57.276Z,1516713057.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:57.304Z,1516713057.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:57.676Z,1516713057.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:57.702Z,1516713057.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:58.077Z,1516713058.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:58.109Z,1516713058.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:58.480Z,1516713058.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:58.510Z,1516713058.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:58.894Z,1516713058.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:58.917Z,1516713058.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:59.296Z,1516713059.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:59.319Z,1516713059.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:10:59.697Z,1516713059.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:10:59.711Z,1516713059.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:00.076Z,1516713060.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:00.109Z,1516713060.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:00.476Z,1516713060.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:00.509Z,1516713060.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:00.875Z,1516713060.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:00.914Z,1516713060.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:01.281Z,1516713061.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:01.317Z,1516713061.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:01.676Z,1516713061.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:01.714Z,1516713061.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:02.087Z,1516713062.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:02.122Z,1516713062.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:02.499Z,1516713062.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:02.517Z,1516713062.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:02.887Z,1516713062.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:02.921Z,1516713062.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:03.280Z,1516713063.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:03.314Z,1516713063.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:03.674Z,1516713063.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:03.689Z,1516713063.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:04.077Z,1516713064.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:04.092Z,1516713064.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:04.476Z,1516713064.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:04.496Z,1516713064.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:04.887Z,1516713064.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:04.925Z,1516713064.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:05.299Z,1516713065.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:05.325Z,1516713065.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:05.700Z,1516713065.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:05.725Z,1516713065.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:10.991Z,1516713070.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:11.030Z,1516713071.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:11.139Z,1516713071.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:11.181Z,1516713071.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:11.542Z,1516713071.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:11.561Z,1516713071.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:11.936Z,1516713071.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:11.951Z,1516713071.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:12.336Z,1516713072.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:12.374Z,1516713072.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:12.708Z,1516713072.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:12.768Z,1516713072.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:13.139Z,1516713073.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:13.154Z,1516713073.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:13.539Z,1516713073.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:13.566Z,1516713073.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:13.955Z,1516713073.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:13.979Z,1516713073.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:14.329Z,1516713074.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:14.363Z,1516713074.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:14.738Z,1516713074.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:14.766Z,1516713074.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:15.126Z,1516713075.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:15.197Z,1516713075.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:15.518Z,1516713075.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:15.567Z,1516713075.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:15.933Z,1516713075.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:15.977Z,1516713075.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:16.328Z,1516713076.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:16.376Z,1516713076.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:16.717Z,1516713076.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:16.741Z,1516713076.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:17.134Z,1516713077.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:17.153Z,1516713077.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:17.534Z,1516713077.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:17.564Z,1516713077.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:17.930Z,1516713077.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:17.949Z,1516713077.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:18.339Z,1516713078.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:18.362Z,1516713078.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:18.740Z,1516713078.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:18.767Z,1516713078.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:19.127Z,1516713079.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:19.167Z,1516713079.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:19.523Z,1516713079.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:19.562Z,1516713079.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:19.925Z,1516713079.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:19.968Z,1516713079.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:20.325Z,1516713080.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:20.366Z,1516713080.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:20.741Z,1516713080.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:20.773Z,1516713080.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:21.123Z,1516713081.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:21.142Z,1516713081.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:21.519Z,1516713081.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:21.542Z,1516713081.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:21.914Z,1516713081.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:21.933Z,1516713081.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:22.315Z,1516713082.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:22.367Z,1516713082.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:22.710Z,1516713082.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:22.730Z,1516713082.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:23.125Z,1516713083.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:23.149Z,1516713083.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:23.529Z,1516713083.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:23.583Z,1516713083.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:23.926Z,1516713083.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:23.951Z,1516713083.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:24.319Z,1516713084.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:24.405Z,1516713084.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:24.710Z,1516713084.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:24.725Z,1516713084.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:25.111Z,1516713085.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:25.126Z,1516713085.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:25.509Z,1516713085.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:25.529Z,1516713085.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:25.923Z,1516713085.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:25.939Z,1516713085.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:26.328Z,1516713086.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:26.342Z,1516713086.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:26.723Z,1516713086.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:26.738Z,1516713086.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:27.114Z,1516713087.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:27.153Z,1516713087.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:27.509Z,1516713087.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:27.532Z,1516713087.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:27.918Z,1516713087.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:27.949Z,1516713087.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:28.312Z,1516713088.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:28.345Z,1516713088.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:28.719Z,1516713088.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:28.734Z,1516713088.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:29.126Z,1516713089.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:29.145Z,1516713089.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:29.526Z,1516713089.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:29.541Z,1516713089.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:29.926Z,1516713089.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:29.945Z,1516713089.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:30.321Z,1516713090.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:30.336Z,1516713090.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:30.713Z,1516713090.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:30.736Z,1516713090.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:31.113Z,1516713091.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:31.136Z,1516713091.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:31.520Z,1516713091.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:31.535Z,1516713091.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:31.926Z,1516713091.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:31.950Z,1516713091.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:32.335Z,1516713092.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:32.350Z,1516713092.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:32.728Z,1516713092.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:32.742Z,1516713092.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:33.126Z,1516713093.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:33.141Z,1516713093.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:33.509Z,1516713093.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:33.535Z,1516713093.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:33.909Z,1516713093.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:33.944Z,1516713093.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:34.310Z,1516713094.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:34.341Z,1516713094.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:34.709Z,1516713094.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:34.746Z,1516713094.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:35.133Z,1516713095.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:35.148Z,1516713095.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:35.536Z,1516713095.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:35.557Z,1516713095.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:35.933Z,1516713095.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:35.953Z,1516713095.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:36.309Z,1516713096.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:36.333Z,1516713096.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:36.709Z,1516713096.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:36.744Z,1516713096.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:37.110Z,1516713097.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:37.141Z,1516713097.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:37.513Z,1516713097.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:37.551Z,1516713097.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:37.920Z,1516713097.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:37.956Z,1516713097.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:38.324Z,1516713098.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:38.360Z,1516713098.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:38.720Z,1516713098.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:38.748Z,1516713098.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:39.109Z,1516713099.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:39.125Z,1516713099.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:39.509Z,1516713099.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:39.529Z,1516713099.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:39.928Z,1516713099.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:39.954Z,1516713099.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:40.323Z,1516713100.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:40.356Z,1516713100.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:40.727Z,1516713100.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:40.751Z,1516713100.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:41.120Z,1516713101.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:41.157Z,1516713101.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:41.514Z,1516713101.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:41.532Z,1516713101.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:41.920Z,1516713101.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:41.957Z,1516713101.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:42.318Z,1516713102.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:42.334Z,1516713102.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:42.716Z,1516713102.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:42.731Z,1516713102.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:43.119Z,1516713103.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:43.135Z,1516713103.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:43.531Z,1516713103.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:43.562Z,1516713103.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:43.927Z,1516713103.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:43.968Z,1516713103.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:44.313Z,1516713104.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:44.340Z,1516713104.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:44.722Z,1516713104.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:44.736Z,1516713104.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:45.119Z,1516713105.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:45.134Z,1516713105.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:45.513Z,1516713105.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:45.547Z,1516713105.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:45.927Z,1516713105.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:45.942Z,1516713105.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:46.327Z,1516713106.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:46.342Z,1516713106.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:46.727Z,1516713106.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:46.742Z,1516713106.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:47.113Z,1516713107.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:47.140Z,1516713107.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:47.521Z,1516713107.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:47.536Z,1516713107.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:47.927Z,1516713107.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:47.942Z,1516713107.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:48.330Z,1516713108.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:48.346Z,1516713108.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:48.728Z,1516713108.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:48.742Z,1516713108.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:49.116Z,1516713109.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:49.136Z,1516713109.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:49.511Z,1516713109.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:49.543Z,1516713109.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:49.928Z,1516713109.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:49.942Z,1516713109.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:50.330Z,1516713110.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:50.349Z,1516713110.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:50.726Z,1516713110.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:50.741Z,1516713110.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:51.118Z,1516713111.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:51.133Z,1516713111.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:51.512Z,1516713111.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:51.534Z,1516713111.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:51.926Z,1516713111.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:51.942Z,1516713111.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:52.331Z,1516713112.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:52.345Z,1516713112.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:52.726Z,1516713112.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:52.741Z,1516713112.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:53.113Z,1516713113.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:53.135Z,1516713113.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:53.516Z,1516713113.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:53.536Z,1516713113.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:53.927Z,1516713113.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:53.942Z,1516713113.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:54.330Z,1516713114.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:54.345Z,1516713114.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:54.730Z,1516713114.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:54.745Z,1516713114.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:54.747Z,1516713114.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:54.747Z,1516713114.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198 2018-01-23T13:11:54.747Z,1516713114.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:11:54.784Z,1516713114.784 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:11:55.110Z,1516713115.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:55.136Z,1516713115.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:55.148Z,1516713115.148 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:11:55.148Z,1516713115.148 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198 2018-01-23T13:11:55.509Z,1516713115.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:55.541Z,1516713115.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:55.542Z,1516713115.542 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:11:55.542Z,1516713115.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:11:55.543Z,1516713115.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:11:55.926Z,1516713115.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:55.951Z,1516713115.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:55.951Z,1516713115.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198 2018-01-23T13:11:55.951Z,1516713115.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:11:55.953Z,1516713115.953 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:55.953Z,1516713115.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 198 2018-01-23T13:11:55.953Z,1516713115.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:11:55.977Z,1516713115.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:11:55.978Z,1516713115.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:11:56.328Z,1516713116.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:56.360Z,1516713116.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:11:56.360Z,1516713116.360 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198 2018-01-23T13:11:56.360Z,1516713116.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:11:56.360Z,1516713116.360 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 198 2018-01-23T13:11:56.727Z,1516713116.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:56.741Z,1516713116.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:11:56.742Z,1516713116.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:11:56.742Z,1516713116.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:11:56.743Z,1516713116.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:11:56.743Z,1516713116.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:11:56.743Z,1516713116.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:11:57.109Z,1516713117.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:57.145Z,1516713117.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:11:57.146Z,1516713117.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:57.513Z,1516713117.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:57.538Z,1516713117.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:11:57.539Z,1516713117.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:57.931Z,1516713117.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:57.946Z,1516713117.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:11:57.947Z,1516713117.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:58.332Z,1516713118.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:58.347Z,1516713118.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:11:58.348Z,1516713118.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:58.719Z,1516713118.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:58.754Z,1516713118.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:11:58.755Z,1516713118.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:59.109Z,1516713119.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:59.132Z,1516713119.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:11:59.133Z,1516713119.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:59.508Z,1516713119.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:59.523Z,1516713119.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:11:59.524Z,1516713119.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:11:59.919Z,1516713119.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:11:59.950Z,1516713119.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:11:59.951Z,1516713119.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:00.342Z,1516713120.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:00.357Z,1516713120.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:12:00.357Z,1516713120.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:00.727Z,1516713120.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:00.752Z,1516713120.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:12:00.753Z,1516713120.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:01.121Z,1516713121.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:01.152Z,1516713121.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:12:01.153Z,1516713121.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:01.520Z,1516713121.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:01.556Z,1516713121.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:12:01.557Z,1516713121.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:01.922Z,1516713121.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:01.937Z,1516713121.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:12:01.938Z,1516713121.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:02.323Z,1516713122.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:02.360Z,1516713122.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:12:02.361Z,1516713122.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:02.731Z,1516713122.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:02.746Z,1516713122.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:12:02.763Z,1516713122.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:03.118Z,1516713123.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:03.132Z,1516713123.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:12:03.133Z,1516713123.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:03.516Z,1516713123.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:03.531Z,1516713123.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:12:03.532Z,1516713123.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:03.921Z,1516713123.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:03.940Z,1516713123.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:12:03.941Z,1516713123.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:04.322Z,1516713124.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:04.336Z,1516713124.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:12:04.337Z,1516713124.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:04.724Z,1516713124.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:04.738Z,1516713124.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:12:04.739Z,1516713124.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:05.116Z,1516713125.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:05.134Z,1516713125.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:12:05.135Z,1516713125.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:05.517Z,1516713125.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:05.532Z,1516713125.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:12:05.533Z,1516713125.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:05.923Z,1516713125.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:05.937Z,1516713125.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:12:05.938Z,1516713125.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:09.031Z,1516713129.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:09.046Z,1516713129.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T13:12:09.047Z,1516713129.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:09.168Z,1516713129.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:09.204Z,1516713129.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T13:12:09.205Z,1516713129.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:09.527Z,1516713129.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:09.542Z,1516713129.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:12:09.543Z,1516713129.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:09.930Z,1516713129.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:09.944Z,1516713129.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:12:09.945Z,1516713129.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:10.326Z,1516713130.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:10.352Z,1516713130.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:12:10.353Z,1516713130.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:10.733Z,1516713130.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:10.747Z,1516713130.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:12:10.748Z,1516713130.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:11.135Z,1516713131.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:11.156Z,1516713131.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:12:11.157Z,1516713131.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:11.534Z,1516713131.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:11.556Z,1516713131.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:12:11.557Z,1516713131.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:11.936Z,1516713131.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:11.950Z,1516713131.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:12:11.951Z,1516713131.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:12.330Z,1516713132.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:12.344Z,1516713132.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:12:12.345Z,1516713132.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:12.725Z,1516713132.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:12.752Z,1516713132.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:12:12.753Z,1516713132.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:13.134Z,1516713133.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:13.148Z,1516713133.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:12:13.149Z,1516713133.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:13.530Z,1516713133.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:13.544Z,1516713133.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:12:13.545Z,1516713133.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:13.938Z,1516713133.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:13.953Z,1516713133.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:12:13.954Z,1516713133.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:14.338Z,1516713134.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:14.356Z,1516713134.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:12:14.357Z,1516713134.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:14.739Z,1516713134.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:14.754Z,1516713134.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:12:14.755Z,1516713134.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:15.125Z,1516713135.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:15.156Z,1516713135.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:12:15.157Z,1516713135.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:15.529Z,1516713135.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:15.548Z,1516713135.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:12:15.549Z,1516713135.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:15.939Z,1516713135.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:15.961Z,1516713135.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:16.338Z,1516713136.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:16.360Z,1516713136.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:16.739Z,1516713136.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:16.761Z,1516713136.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:17.134Z,1516713137.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:17.149Z,1516713137.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:17.519Z,1516713137.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:17.555Z,1516713137.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:17.939Z,1516713137.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:17.954Z,1516713137.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:18.343Z,1516713138.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:18.365Z,1516713138.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:18.736Z,1516713138.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:18.759Z,1516713138.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:19.122Z,1516713139.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:19.149Z,1516713139.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:19.520Z,1516713139.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:19.555Z,1516713139.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:19.940Z,1516713139.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:19.956Z,1516713139.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:20.343Z,1516713140.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:20.358Z,1516713140.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:20.737Z,1516713140.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:20.764Z,1516713140.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:21.121Z,1516713141.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:21.153Z,1516713141.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:21.519Z,1516713141.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:21.545Z,1516713141.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:21.939Z,1516713141.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:21.954Z,1516713141.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:22.343Z,1516713142.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:22.358Z,1516713142.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:22.740Z,1516713142.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:22.755Z,1516713142.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:23.121Z,1516713143.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:23.157Z,1516713143.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:23.518Z,1516713143.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:23.549Z,1516713143.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:23.940Z,1516713143.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:23.954Z,1516713143.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:24.351Z,1516713144.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:24.365Z,1516713144.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:24.736Z,1516713144.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:24.757Z,1516713144.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:25.121Z,1516713145.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:25.148Z,1516713145.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:25.522Z,1516713145.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:25.558Z,1516713145.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:25.925Z,1516713145.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:25.952Z,1516713145.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:26.341Z,1516713146.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:26.361Z,1516713146.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:26.741Z,1516713146.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:26.768Z,1516713146.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:27.140Z,1516713147.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:27.155Z,1516713147.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:27.520Z,1516713147.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:27.547Z,1516713147.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:27.920Z,1516713147.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:27.964Z,1516713147.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:28.321Z,1516713148.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:28.353Z,1516713148.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:28.720Z,1516713148.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:28.747Z,1516713148.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:29.137Z,1516713149.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:29.157Z,1516713149.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:29.538Z,1516713149.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:29.561Z,1516713149.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:29.939Z,1516713149.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:29.954Z,1516713149.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:30.320Z,1516713150.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:30.356Z,1516713150.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:30.718Z,1516713150.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:30.741Z,1516713150.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:31.119Z,1516713151.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:31.153Z,1516713151.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:31.521Z,1516713151.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:31.560Z,1516713151.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:31.920Z,1516713151.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:31.957Z,1516713151.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:32.336Z,1516713152.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:32.362Z,1516713152.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:32.735Z,1516713152.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:32.770Z,1516713152.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:33.135Z,1516713153.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:33.161Z,1516713153.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:33.520Z,1516713153.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:33.541Z,1516713153.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:33.928Z,1516713153.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:33.943Z,1516713153.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:34.323Z,1516713154.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:34.338Z,1516713154.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:34.725Z,1516713154.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:34.740Z,1516713154.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:35.143Z,1516713155.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:35.178Z,1516713155.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:35.532Z,1516713155.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:35.546Z,1516713155.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:35.931Z,1516713155.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:35.953Z,1516713155.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:36.332Z,1516713156.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:36.347Z,1516713156.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:36.730Z,1516713156.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:36.745Z,1516713156.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:37.128Z,1516713157.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:37.149Z,1516713157.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:37.533Z,1516713157.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:37.547Z,1516713157.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:37.932Z,1516713157.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:37.947Z,1516713157.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:38.347Z,1516713158.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:38.378Z,1516713158.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:38.735Z,1516713158.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:38.756Z,1516713158.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:39.136Z,1516713159.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:39.151Z,1516713159.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:39.528Z,1516713159.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:39.543Z,1516713159.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:39.933Z,1516713159.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:39.952Z,1516713159.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:40.331Z,1516713160.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:40.346Z,1516713160.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:40.728Z,1516713160.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:40.743Z,1516713160.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:41.135Z,1516713161.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:41.150Z,1516713161.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:41.535Z,1516713161.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:41.550Z,1516713161.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:41.947Z,1516713161.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:41.978Z,1516713161.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:42.330Z,1516713162.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:42.345Z,1516713162.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:42.728Z,1516713162.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:42.743Z,1516713162.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:43.134Z,1516713163.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:43.149Z,1516713163.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:43.534Z,1516713163.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:43.549Z,1516713163.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:43.933Z,1516713163.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:43.948Z,1516713163.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:44.334Z,1516713164.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:44.349Z,1516713164.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:44.736Z,1516713164.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:44.751Z,1516713164.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:45.136Z,1516713165.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:45.151Z,1516713165.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:45.528Z,1516713165.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:45.545Z,1516713165.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:45.930Z,1516713165.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:45.945Z,1516713165.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:46.331Z,1516713166.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:46.346Z,1516713166.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:46.728Z,1516713166.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:46.757Z,1516713166.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:47.139Z,1516713167.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:47.155Z,1516713167.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:47.538Z,1516713167.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:47.553Z,1516713167.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:47.936Z,1516713167.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:47.963Z,1516713167.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:48.337Z,1516713168.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:48.352Z,1516713168.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:48.735Z,1516713168.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:48.750Z,1516713168.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:49.123Z,1516713169.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:49.156Z,1516713169.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:49.530Z,1516713169.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:49.562Z,1516713169.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:49.937Z,1516713169.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:49.956Z,1516713169.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:50.347Z,1516713170.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:50.362Z,1516713170.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:50.744Z,1516713170.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:50.760Z,1516713170.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:51.144Z,1516713171.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:51.159Z,1516713171.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:51.527Z,1516713171.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:51.550Z,1516713171.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:51.939Z,1516713171.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:51.954Z,1516713171.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:52.322Z,1516713172.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:52.349Z,1516713172.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:52.723Z,1516713172.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:52.750Z,1516713172.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:53.140Z,1516713173.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:53.171Z,1516713173.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:53.552Z,1516713173.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:53.573Z,1516713173.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:53.948Z,1516713173.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:53.963Z,1516713173.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:54.323Z,1516713174.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:54.355Z,1516713174.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:54.722Z,1516713174.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:54.762Z,1516713174.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:55.128Z,1516713175.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:55.163Z,1516713175.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:55.530Z,1516713175.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:55.558Z,1516713175.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:55.928Z,1516713175.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:55.962Z,1516713175.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:56.356Z,1516713176.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:56.371Z,1516713176.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:56.749Z,1516713176.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:56.765Z,1516713176.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:57.148Z,1516713177.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:57.167Z,1516713177.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:57.536Z,1516713177.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:57.561Z,1516713177.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:57.927Z,1516713177.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:57.963Z,1516713177.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:58.330Z,1516713178.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:58.357Z,1516713178.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:58.728Z,1516713178.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:58.746Z,1516713178.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:59.141Z,1516713179.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:59.173Z,1516713179.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:59.548Z,1516713179.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:59.577Z,1516713179.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:12:59.943Z,1516713179.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:12:59.967Z,1516713179.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:00.330Z,1516713180.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:00.344Z,1516713180.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:00.726Z,1516713180.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:00.749Z,1516713180.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:01.128Z,1516713181.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:01.151Z,1516713181.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:01.533Z,1516713181.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:01.547Z,1516713181.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:01.931Z,1516713181.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:01.946Z,1516713181.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:02.335Z,1516713182.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:02.351Z,1516713182.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:02.738Z,1516713182.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:02.753Z,1516713182.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:03.138Z,1516713183.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:03.153Z,1516713183.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:03.530Z,1516713183.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:03.557Z,1516713183.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:03.936Z,1516713183.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:03.952Z,1516713183.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:04.337Z,1516713184.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:04.352Z,1516713184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:04.735Z,1516713184.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:04.757Z,1516713184.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:05.139Z,1516713185.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:05.155Z,1516713185.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:05.538Z,1516713185.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:05.556Z,1516713185.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:05.941Z,1516713185.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:05.956Z,1516713185.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:09.030Z,1516713189.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:09.045Z,1516713189.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:09.141Z,1516713189.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:09.156Z,1516713189.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:09.511Z,1516713189.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:09.545Z,1516713189.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:09.924Z,1516713189.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:09.939Z,1516713189.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:10.307Z,1516713190.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:10.342Z,1516713190.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:10.697Z,1516713190.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:10.734Z,1516713190.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:11.096Z,1516713191.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:11.111Z,1516713191.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:11.494Z,1516713191.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:11.526Z,1516713191.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:11.896Z,1516713191.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:11.917Z,1516713191.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:12.302Z,1516713192.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:12.317Z,1516713192.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:12.703Z,1516713192.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:12.718Z,1516713192.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:13.102Z,1516713193.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:13.125Z,1516713193.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:13.497Z,1516713193.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:13.512Z,1516713193.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:13.893Z,1516713193.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:13.920Z,1516713193.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:14.302Z,1516713194.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:14.317Z,1516713194.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:14.697Z,1516713194.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:14.712Z,1516713194.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:15.106Z,1516713195.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:15.125Z,1516713195.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:15.507Z,1516713195.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:15.522Z,1516713195.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:15.906Z,1516713195.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:15.929Z,1516713195.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:16.301Z,1516713196.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:16.322Z,1516713196.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:16.696Z,1516713196.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:16.711Z,1516713196.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:17.093Z,1516713197.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:17.121Z,1516713197.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:17.493Z,1516713197.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:17.516Z,1516713197.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:17.892Z,1516713197.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:17.915Z,1516713197.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:18.307Z,1516713198.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:18.322Z,1516713198.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:18.710Z,1516713198.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:18.733Z,1516713198.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:19.110Z,1516713199.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:19.125Z,1516713199.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:19.489Z,1516713199.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:19.516Z,1516713199.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:19.901Z,1516713199.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:19.916Z,1516713199.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:20.289Z,1516713200.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:20.321Z,1516713200.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:20.705Z,1516713200.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:20.720Z,1516713200.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:21.111Z,1516713201.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:21.126Z,1516713201.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:21.511Z,1516713201.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:21.526Z,1516713201.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:21.906Z,1516713201.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:21.933Z,1516713201.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:22.289Z,1516713202.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:22.315Z,1516713202.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:22.688Z,1516713202.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:22.714Z,1516713202.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:23.088Z,1516713203.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:23.117Z,1516713203.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:23.490Z,1516713203.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:23.516Z,1516713203.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:23.888Z,1516713203.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:23.914Z,1516713203.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:24.306Z,1516713204.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:24.330Z,1516713204.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:24.711Z,1516713204.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:24.726Z,1516713204.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:25.104Z,1516713205.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:25.133Z,1516713205.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:25.489Z,1516713205.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:25.517Z,1516713205.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:25.889Z,1516713205.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:25.914Z,1516713205.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:26.288Z,1516713206.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:26.321Z,1516713206.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:26.688Z,1516713206.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:26.725Z,1516713206.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:27.108Z,1516713207.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:27.123Z,1516713207.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:27.518Z,1516713207.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:27.544Z,1516713207.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:27.909Z,1516713207.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:27.928Z,1516713207.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:28.293Z,1516713208.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:28.320Z,1516713208.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:28.689Z,1516713208.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:28.716Z,1516713208.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:29.089Z,1516713209.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:29.126Z,1516713209.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:29.494Z,1516713209.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:29.525Z,1516713209.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:29.896Z,1516713209.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:29.929Z,1516713209.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:30.299Z,1516713210.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:30.336Z,1516713210.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:30.716Z,1516713210.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:30.731Z,1516713210.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:31.100Z,1516713211.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:31.137Z,1516713211.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:31.492Z,1516713211.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:31.535Z,1516713211.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:31.890Z,1516713211.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:31.905Z,1516713211.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:32.290Z,1516713212.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:32.305Z,1516713212.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:32.693Z,1516713212.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:32.708Z,1516713212.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:33.104Z,1516713213.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:33.135Z,1516713213.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:33.507Z,1516713213.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:33.522Z,1516713213.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:33.900Z,1516713213.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:33.915Z,1516713213.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:34.297Z,1516713214.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:34.312Z,1516713214.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:34.696Z,1516713214.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:34.712Z,1516713214.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:35.098Z,1516713215.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:35.114Z,1516713215.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:35.494Z,1516713215.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:35.521Z,1516713215.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:35.901Z,1516713215.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:35.916Z,1516713215.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:36.303Z,1516713216.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:36.319Z,1516713216.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:36.702Z,1516713216.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:36.721Z,1516713216.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:37.102Z,1516713217.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:37.117Z,1516713217.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:37.497Z,1516713217.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:37.522Z,1516713217.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:37.896Z,1516713217.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:37.915Z,1516713217.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:38.296Z,1516713218.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:38.323Z,1516713218.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:38.703Z,1516713218.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:38.717Z,1516713218.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:39.106Z,1516713219.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:39.125Z,1516713219.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:39.511Z,1516713219.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:39.526Z,1516713219.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:39.908Z,1516713219.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:39.923Z,1516713219.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:40.293Z,1516713220.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:40.323Z,1516713220.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:40.696Z,1516713220.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:40.727Z,1516713220.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:41.108Z,1516713221.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:41.123Z,1516713221.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:41.506Z,1516713221.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:41.529Z,1516713221.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:41.906Z,1516713221.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:41.930Z,1516713221.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:42.289Z,1516713222.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:42.317Z,1516713222.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:42.686Z,1516713222.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:42.714Z,1516713222.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:43.107Z,1516713223.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:43.122Z,1516713223.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:43.510Z,1516713223.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:43.537Z,1516713223.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:43.908Z,1516713223.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:43.922Z,1516713223.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:44.289Z,1516713224.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:44.321Z,1516713224.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:44.687Z,1516713224.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:44.726Z,1516713224.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:45.107Z,1516713225.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:45.123Z,1516713225.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:45.514Z,1516713225.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:45.529Z,1516713225.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:45.899Z,1516713225.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:45.935Z,1516713225.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:46.293Z,1516713226.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:46.329Z,1516713226.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:46.692Z,1516713226.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:46.728Z,1516713226.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:47.099Z,1516713227.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:47.134Z,1516713227.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:47.499Z,1516713227.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:47.525Z,1516713227.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:47.899Z,1516713227.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:47.926Z,1516713227.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:48.289Z,1516713228.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:48.333Z,1516713228.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:48.686Z,1516713228.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:48.701Z,1516713228.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:49.099Z,1516713229.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:49.130Z,1516713229.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:49.511Z,1516713229.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:49.539Z,1516713229.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:49.903Z,1516713229.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:49.934Z,1516713229.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:50.294Z,1516713230.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:50.309Z,1516713230.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:50.693Z,1516713230.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:50.708Z,1516713230.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:51.104Z,1516713231.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:51.135Z,1516713231.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:51.507Z,1516713231.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:51.539Z,1516713231.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:51.903Z,1516713231.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:51.943Z,1516713231.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:52.298Z,1516713232.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:52.313Z,1516713232.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:52.694Z,1516713232.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:52.713Z,1516713232.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:53.103Z,1516713233.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:53.118Z,1516713233.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:53.499Z,1516713233.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:53.514Z,1516713233.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:53.899Z,1516713233.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:53.914Z,1516713233.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:54.297Z,1516713234.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:54.312Z,1516713234.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:54.692Z,1516713234.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:54.711Z,1516713234.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:55.099Z,1516713235.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:55.114Z,1516713235.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:55.503Z,1516713235.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:55.518Z,1516713235.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:55.900Z,1516713235.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:55.915Z,1516713235.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:56.296Z,1516713236.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:56.311Z,1516713236.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:56.696Z,1516713236.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:56.711Z,1516713236.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:57.100Z,1516713237.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:57.115Z,1516713237.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:57.503Z,1516713237.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:57.518Z,1516713237.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:57.899Z,1516713237.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:57.920Z,1516713237.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:58.298Z,1516713238.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:58.313Z,1516713238.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:58.694Z,1516713238.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:58.721Z,1516713238.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:59.102Z,1516713239.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:59.117Z,1516713239.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:59.501Z,1516713239.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:59.521Z,1516713239.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:13:59.902Z,1516713239.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:13:59.921Z,1516713239.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:00.298Z,1516713240.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:00.312Z,1516713240.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:00.692Z,1516713240.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:00.715Z,1516713240.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:01.106Z,1516713241.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:01.121Z,1516713241.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:01.506Z,1516713241.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:01.521Z,1516713241.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:01.906Z,1516713241.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:01.925Z,1516713241.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:02.297Z,1516713242.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:02.312Z,1516713242.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:02.694Z,1516713242.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:02.720Z,1516713242.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:03.106Z,1516713243.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:03.121Z,1516713243.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:03.507Z,1516713243.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:03.522Z,1516713243.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:03.907Z,1516713243.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:03.921Z,1516713243.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:04.296Z,1516713244.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:04.315Z,1516713244.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:04.695Z,1516713244.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:04.710Z,1516713244.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:05.107Z,1516713245.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:05.122Z,1516713245.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:05.503Z,1516713245.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:05.526Z,1516713245.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:05.915Z,1516713245.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:05.930Z,1516713245.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:06.301Z,1516713246.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:06.315Z,1516713246.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:09.400Z,1516713249.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:09.416Z,1516713249.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:09.524Z,1516713249.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:09.564Z,1516713249.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:09.872Z,1516713249.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:09.893Z,1516713249.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:10.283Z,1516713250.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:10.320Z,1516713250.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:10.660Z,1516713250.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:10.681Z,1516713250.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:11.066Z,1516713251.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:11.090Z,1516713251.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:11.457Z,1516713251.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:11.487Z,1516713251.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:11.873Z,1516713251.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:11.893Z,1516713251.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:12.283Z,1516713252.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:12.298Z,1516713252.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:12.683Z,1516713252.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:12.698Z,1516713252.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:13.079Z,1516713253.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:13.095Z,1516713253.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:13.469Z,1516713253.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:13.485Z,1516713253.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:13.857Z,1516713253.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:13.894Z,1516713253.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:14.270Z,1516713254.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:14.285Z,1516713254.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:14.670Z,1516713254.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:14.693Z,1516713254.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:15.061Z,1516713255.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:15.089Z,1516713255.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:15.472Z,1516713255.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:15.494Z,1516713255.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:15.876Z,1516713255.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:15.904Z,1516713255.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:16.281Z,1516713256.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:16.296Z,1516713256.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:16.654Z,1516713256.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:16.678Z,1516713256.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:17.056Z,1516713257.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:17.094Z,1516713257.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:17.457Z,1516713257.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:17.495Z,1516713257.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:17.857Z,1516713257.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:17.884Z,1516713257.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:18.267Z,1516713258.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:18.294Z,1516713258.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:18.671Z,1516713258.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:18.699Z,1516713258.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:19.068Z,1516713259.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:19.093Z,1516713259.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:19.457Z,1516713259.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:19.472Z,1516713259.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:19.856Z,1516713259.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:19.876Z,1516713259.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:20.262Z,1516713260.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:20.277Z,1516713260.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:20.674Z,1516713260.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:20.705Z,1516713260.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:21.064Z,1516713261.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:21.079Z,1516713261.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:21.475Z,1516713261.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:21.490Z,1516713261.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:21.871Z,1516713261.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:21.886Z,1516713261.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:22.267Z,1516713262.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:22.282Z,1516713262.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:22.661Z,1516713262.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:22.677Z,1516713262.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:23.062Z,1516713263.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:23.085Z,1516713263.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:23.466Z,1516713263.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:23.488Z,1516713263.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:23.864Z,1516713263.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:23.878Z,1516713263.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:24.269Z,1516713264.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:24.289Z,1516713264.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:24.671Z,1516713264.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:24.686Z,1516713264.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:25.069Z,1516713265.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:25.089Z,1516713265.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:25.464Z,1516713265.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:25.479Z,1516713265.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:25.865Z,1516713265.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:25.880Z,1516713265.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:26.265Z,1516713266.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:26.280Z,1516713266.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:26.664Z,1516713266.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:26.683Z,1516713266.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:27.065Z,1516713267.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:27.080Z,1516713267.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:27.469Z,1516713267.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:27.489Z,1516713267.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:27.871Z,1516713267.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:27.886Z,1516713267.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:28.270Z,1516713268.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:28.292Z,1516713268.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:28.661Z,1516713268.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:28.681Z,1516713268.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:29.061Z,1516713269.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:29.082Z,1516713269.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:29.466Z,1516713269.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:29.481Z,1516713269.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:29.493Z,1516713269.493 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:14:29.861Z,1516713269.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:29.882Z,1516713269.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:30.270Z,1516713270.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:30.289Z,1516713270.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:30.675Z,1516713270.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:30.690Z,1516713270.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:31.070Z,1516713271.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:31.089Z,1516713271.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:31.464Z,1516713271.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:31.479Z,1516713271.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:31.865Z,1516713271.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:31.879Z,1516713271.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:32.261Z,1516713272.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:32.282Z,1516713272.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:32.665Z,1516713272.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:32.680Z,1516713272.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:33.065Z,1516713273.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:33.079Z,1516713273.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:33.469Z,1516713273.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:33.489Z,1516713273.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:33.871Z,1516713273.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:33.886Z,1516713273.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:34.270Z,1516713274.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:34.285Z,1516713274.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:34.660Z,1516713274.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:34.680Z,1516713274.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:35.061Z,1516713275.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:35.088Z,1516713275.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:35.466Z,1516713275.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:35.480Z,1516713275.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:35.864Z,1516713275.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:35.883Z,1516713275.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:36.274Z,1516713276.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:36.289Z,1516713276.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:36.678Z,1516713276.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:36.700Z,1516713276.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:37.078Z,1516713277.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:37.097Z,1516713277.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:37.468Z,1516713277.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:37.489Z,1516713277.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:37.865Z,1516713277.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:37.884Z,1516713277.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:38.269Z,1516713278.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:38.289Z,1516713278.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:38.661Z,1516713278.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:38.683Z,1516713278.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:39.066Z,1516713279.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:39.088Z,1516713279.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:39.474Z,1516713279.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:39.490Z,1516713279.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:39.878Z,1516713279.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:39.893Z,1516713279.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:40.276Z,1516713280.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:40.291Z,1516713280.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:40.665Z,1516713280.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:40.680Z,1516713280.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:41.063Z,1516713281.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:41.079Z,1516713281.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:41.466Z,1516713281.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:41.488Z,1516713281.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:41.864Z,1516713281.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:41.883Z,1516713281.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:42.278Z,1516713282.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:42.301Z,1516713282.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:42.680Z,1516713282.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:42.695Z,1516713282.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:43.076Z,1516713283.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:43.091Z,1516713283.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:43.457Z,1516713283.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:43.492Z,1516713283.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:43.857Z,1516713283.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:43.890Z,1516713283.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:44.257Z,1516713284.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:44.293Z,1516713284.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:44.661Z,1516713284.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:44.688Z,1516713284.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:45.057Z,1516713285.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:45.090Z,1516713285.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:45.472Z,1516713285.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:45.497Z,1516713285.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:45.879Z,1516713285.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:45.900Z,1516713285.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:46.281Z,1516713286.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:46.295Z,1516713286.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:46.657Z,1516713286.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:46.672Z,1516713286.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:47.057Z,1516713287.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:47.072Z,1516713287.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:47.463Z,1516713287.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:47.478Z,1516713287.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:47.865Z,1516713287.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:47.881Z,1516713287.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:48.271Z,1516713288.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:48.309Z,1516713288.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:48.679Z,1516713288.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:48.694Z,1516713288.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:49.080Z,1516713289.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:49.117Z,1516713289.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:49.468Z,1516713289.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:49.483Z,1516713289.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:49.866Z,1516713289.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:49.888Z,1516713289.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:50.261Z,1516713290.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:50.281Z,1516713290.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:50.661Z,1516713290.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:50.684Z,1516713290.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:51.066Z,1516713291.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:51.080Z,1516713291.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:51.470Z,1516713291.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:51.485Z,1516713291.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:51.871Z,1516713291.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:51.886Z,1516713291.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:52.271Z,1516713292.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:52.286Z,1516713292.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:52.661Z,1516713292.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:52.681Z,1516713292.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:53.064Z,1516713293.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:53.083Z,1516713293.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:53.467Z,1516713293.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:53.482Z,1516713293.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:53.870Z,1516713293.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:53.885Z,1516713293.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:54.271Z,1516713294.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:54.286Z,1516713294.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:54.672Z,1516713294.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:54.687Z,1516713294.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:55.071Z,1516713295.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:55.085Z,1516713295.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:55.464Z,1516713295.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:55.485Z,1516713295.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:55.869Z,1516713295.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:55.885Z,1516713295.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:55.887Z,1516713295.887 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:55.887Z,1516713295.887 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199 2018-01-23T13:14:55.887Z,1516713295.887 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:14:55.933Z,1516713295.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:14:56.265Z,1516713296.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:56.281Z,1516713296.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:56.294Z,1516713296.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:14:56.294Z,1516713296.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199 2018-01-23T13:14:56.658Z,1516713296.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:56.692Z,1516713296.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:56.693Z,1516713296.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:14:56.694Z,1516713296.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:14:56.694Z,1516713296.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:14:57.065Z,1516713297.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:57.080Z,1516713297.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:57.080Z,1516713297.080 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199 2018-01-23T13:14:57.080Z,1516713297.080 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:14:57.082Z,1516713297.082 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:57.082Z,1516713297.082 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 199 2018-01-23T13:14:57.082Z,1516713297.082 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:14:57.095Z,1516713297.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:14:57.096Z,1516713297.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:14:57.475Z,1516713297.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:57.502Z,1516713297.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:14:57.502Z,1516713297.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199 2018-01-23T13:14:57.502Z,1516713297.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:14:57.502Z,1516713297.502 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 199 2018-01-23T13:14:57.878Z,1516713297.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:57.893Z,1516713297.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:14:57.893Z,1516713297.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:14:57.894Z,1516713297.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:14:57.894Z,1516713297.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:14:57.895Z,1516713297.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:14:57.895Z,1516713297.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:14:58.274Z,1516713298.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:58.309Z,1516713298.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:14:58.310Z,1516713298.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:58.654Z,1516713298.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:58.669Z,1516713298.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:14:58.670Z,1516713298.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:59.057Z,1516713299.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:59.071Z,1516713299.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:14:59.072Z,1516713299.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:59.457Z,1516713299.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:59.472Z,1516713299.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:14:59.473Z,1516713299.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:14:59.862Z,1516713299.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:14:59.876Z,1516713299.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:14:59.877Z,1516713299.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:00.275Z,1516713300.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:00.307Z,1516713300.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:15:00.308Z,1516713300.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:00.679Z,1516713300.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:00.705Z,1516713300.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:15:00.706Z,1516713300.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:01.075Z,1516713301.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:01.106Z,1516713301.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:15:01.111Z,1516713301.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:01.462Z,1516713301.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:01.485Z,1516713301.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:15:01.486Z,1516713301.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:01.869Z,1516713301.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:01.883Z,1516713301.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:15:01.884Z,1516713301.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:02.264Z,1516713302.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:02.279Z,1516713302.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:15:02.280Z,1516713302.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:02.660Z,1516713302.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:02.692Z,1516713302.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:15:02.693Z,1516713302.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:03.062Z,1516713303.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:03.088Z,1516713303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:15:03.089Z,1516713303.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:03.475Z,1516713303.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:03.489Z,1516713303.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:15:03.490Z,1516713303.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:03.878Z,1516713303.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:03.892Z,1516713303.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:15:03.893Z,1516713303.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:04.276Z,1516713304.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:04.290Z,1516713304.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:15:04.291Z,1516713304.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:04.654Z,1516713304.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:04.681Z,1516713304.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:15:04.682Z,1516713304.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:05.057Z,1516713305.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:05.088Z,1516713305.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:15:05.089Z,1516713305.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:05.470Z,1516713305.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:05.484Z,1516713305.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:15:05.485Z,1516713305.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:05.488Z,1516713305.488 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:15:05.488Z,1516713305.488 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:15:05.488Z,1516713305.488 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:15:05.489Z,1516713305.489 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:15:05.857Z,1516713305.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:05.888Z,1516713305.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:15:05.889Z,1516713305.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:05.892Z,1516713305.892 [Default:CheckIn:D] Stopped 2018-01-23T13:15:05.892Z,1516713305.892 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:15:06.275Z,1516713306.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:06.289Z,1516713306.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:15:06.290Z,1516713306.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:06.294Z,1516713306.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 597.230534 min 2018-01-23T13:15:06.294Z,1516713306.294 [Default:CheckIn:E] Stopped 2018-01-23T13:15:06.294Z,1516713306.294 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:15:06.294Z,1516713306.294 [Default:CheckIn] Stopped 2018-01-23T13:15:06.294Z,1516713306.294 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:15:06.295Z,1516713306.295 [Default:CheckIn](INFO): Running loop #59 2018-01-23T13:15:06.295Z,1516713306.295 [Default:CheckIn] Running Loop=59 2018-01-23T13:15:06.295Z,1516713306.295 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:15:06.295Z,1516713306.295 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:15:06.678Z,1516713306.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:06.704Z,1516713306.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:15:06.705Z,1516713306.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:09.784Z,1516713309.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:09.804Z,1516713309.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T13:15:09.805Z,1516713309.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:09.899Z,1516713309.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:09.934Z,1516713309.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T13:15:09.935Z,1516713309.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:10.282Z,1516713310.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:10.296Z,1516713310.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:15:10.297Z,1516713310.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:10.685Z,1516713310.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:10.704Z,1516713310.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:15:10.705Z,1516713310.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:11.076Z,1516713311.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:11.091Z,1516713311.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:15:11.092Z,1516713311.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:11.482Z,1516713311.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:11.508Z,1516713311.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:15:11.509Z,1516713311.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:11.890Z,1516713311.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:11.905Z,1516713311.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:15:11.906Z,1516713311.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:12.287Z,1516713312.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:12.302Z,1516713312.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:15:12.303Z,1516713312.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:12.678Z,1516713312.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:12.696Z,1516713312.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:15:12.697Z,1516713312.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:13.072Z,1516713313.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:13.104Z,1516713313.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:15:13.105Z,1516713313.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:13.473Z,1516713313.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:13.499Z,1516713313.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:15:13.500Z,1516713313.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:13.869Z,1516713313.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:13.900Z,1516713313.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:15:13.901Z,1516713313.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:14.292Z,1516713314.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:14.306Z,1516713314.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:15:14.307Z,1516713314.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:14.691Z,1516713314.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:14.705Z,1516713314.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:15:14.706Z,1516713314.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:15.083Z,1516713315.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:15.106Z,1516713315.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:15:15.107Z,1516713315.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:15.477Z,1516713315.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:15.503Z,1516713315.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:15:15.504Z,1516713315.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:15.868Z,1516713315.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:15.899Z,1516713315.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:15:15.900Z,1516713315.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:16.269Z,1516713316.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:16.308Z,1516713316.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:15:16.309Z,1516713316.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:16.673Z,1516713316.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:16.704Z,1516713316.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:15:16.705Z,1516713316.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:17.068Z,1516713317.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:17.084Z,1516713317.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:17.492Z,1516713317.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:17.518Z,1516713317.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:17.887Z,1516713317.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:17.914Z,1516713317.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:18.283Z,1516713318.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:18.318Z,1516713318.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:18.674Z,1516713318.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:18.689Z,1516713318.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:19.074Z,1516713319.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:19.089Z,1516713319.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:19.476Z,1516713319.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:19.491Z,1516713319.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:19.873Z,1516713319.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:19.900Z,1516713319.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:20.282Z,1516713320.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:20.297Z,1516713320.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:20.683Z,1516713320.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:20.698Z,1516713320.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:21.083Z,1516713321.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:21.105Z,1516713321.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:21.481Z,1516713321.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:21.496Z,1516713321.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:21.877Z,1516713321.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:21.892Z,1516713321.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:22.272Z,1516713322.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:22.299Z,1516713322.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:22.678Z,1516713322.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:22.693Z,1516713322.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:23.077Z,1516713323.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:23.092Z,1516713323.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:23.487Z,1516713323.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:23.506Z,1516713323.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:23.892Z,1516713323.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:23.907Z,1516713323.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:24.288Z,1516713324.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:24.303Z,1516713324.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:24.669Z,1516713324.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:24.705Z,1516713324.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:25.072Z,1516713325.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:25.110Z,1516713325.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:25.477Z,1516713325.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:25.509Z,1516713325.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:25.869Z,1516713325.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:25.909Z,1516713325.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:26.284Z,1516713326.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:26.317Z,1516713326.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:26.687Z,1516713326.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:26.727Z,1516713326.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:27.088Z,1516713327.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:27.125Z,1516713327.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:27.469Z,1516713327.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:27.485Z,1516713327.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:27.873Z,1516713327.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:27.888Z,1516713327.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:28.278Z,1516713328.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:28.293Z,1516713328.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:28.677Z,1516713328.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:28.692Z,1516713328.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:29.073Z,1516713329.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:29.100Z,1516713329.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:29.480Z,1516713329.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:29.495Z,1516713329.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:29.884Z,1516713329.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:29.899Z,1516713329.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:30.280Z,1516713330.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:30.295Z,1516713330.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:30.676Z,1516713330.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:30.701Z,1516713330.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:31.077Z,1516713331.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:31.093Z,1516713331.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:31.477Z,1516713331.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:31.493Z,1516713331.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:31.878Z,1516713331.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:31.897Z,1516713331.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:32.282Z,1516713332.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:32.298Z,1516713332.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:32.683Z,1516713332.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:32.698Z,1516713332.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:33.083Z,1516713333.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:33.104Z,1516713333.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:33.477Z,1516713333.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:33.497Z,1516713333.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:33.877Z,1516713333.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:33.893Z,1516713333.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:34.283Z,1516713334.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:34.298Z,1516713334.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:34.684Z,1516713334.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:34.705Z,1516713334.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:35.088Z,1516713335.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:35.103Z,1516713335.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:35.473Z,1516713335.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:35.509Z,1516713335.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:35.878Z,1516713335.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:35.901Z,1516713335.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:36.276Z,1516713336.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:36.292Z,1516713336.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:36.676Z,1516713336.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:36.704Z,1516713336.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:37.080Z,1516713337.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:37.096Z,1516713337.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:37.486Z,1516713337.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:37.502Z,1516713337.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:37.890Z,1516713337.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:37.909Z,1516713337.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:38.290Z,1516713338.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:38.305Z,1516713338.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:38.676Z,1516713338.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:38.691Z,1516713338.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:39.068Z,1516713339.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:39.103Z,1516713339.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:39.469Z,1516713339.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:39.497Z,1516713339.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:39.868Z,1516713339.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:39.901Z,1516713339.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:40.286Z,1516713340.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:40.310Z,1516713340.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:40.695Z,1516713340.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:40.710Z,1516713340.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:41.082Z,1516713341.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:41.106Z,1516713341.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:41.469Z,1516713341.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:41.501Z,1516713341.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:41.868Z,1516713341.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:41.905Z,1516713341.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:42.292Z,1516713342.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:42.307Z,1516713342.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:42.691Z,1516713342.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:42.717Z,1516713342.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:43.091Z,1516713343.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:43.107Z,1516713343.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:43.469Z,1516713343.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:43.496Z,1516713343.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:43.872Z,1516713343.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:43.913Z,1516713343.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:44.283Z,1516713344.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:44.317Z,1516713344.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:44.683Z,1516713344.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:44.710Z,1516713344.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:45.079Z,1516713345.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:45.112Z,1516713345.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:45.473Z,1516713345.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:45.505Z,1516713345.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:45.872Z,1516713345.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:45.887Z,1516713345.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:46.283Z,1516713346.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:46.318Z,1516713346.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:46.687Z,1516713346.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:46.720Z,1516713346.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:47.090Z,1516713347.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:47.119Z,1516713347.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:47.481Z,1516713347.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:47.496Z,1516713347.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:47.876Z,1516713347.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:47.897Z,1516713347.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:48.291Z,1516713348.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:48.322Z,1516713348.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:48.687Z,1516713348.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:48.701Z,1516713348.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:49.091Z,1516713349.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:49.106Z,1516713349.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:49.477Z,1516713349.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:49.492Z,1516713349.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:49.877Z,1516713349.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:49.896Z,1516713349.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:50.281Z,1516713350.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:50.301Z,1516713350.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:50.683Z,1516713350.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:50.698Z,1516713350.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:51.082Z,1516713351.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:51.097Z,1516713351.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:51.476Z,1516713351.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:51.503Z,1516713351.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:51.876Z,1516713351.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:51.891Z,1516713351.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:52.286Z,1516713352.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:52.309Z,1516713352.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:52.687Z,1516713352.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:52.703Z,1516713352.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:53.086Z,1516713353.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:53.101Z,1516713353.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:53.478Z,1516713353.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:53.492Z,1516713353.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:53.876Z,1516713353.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:53.891Z,1516713353.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:54.287Z,1516713354.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:54.302Z,1516713354.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:54.687Z,1516713354.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:54.701Z,1516713354.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:55.086Z,1516713355.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:55.101Z,1516713355.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:55.477Z,1516713355.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:55.492Z,1516713355.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:55.877Z,1516713355.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:55.896Z,1516713355.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:56.286Z,1516713356.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:56.301Z,1516713356.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:56.685Z,1516713356.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:56.701Z,1516713356.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:57.087Z,1516713357.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:57.109Z,1516713357.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:57.481Z,1516713357.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:57.497Z,1516713357.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:57.876Z,1516713357.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:57.891Z,1516713357.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:58.287Z,1516713358.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:58.301Z,1516713358.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:58.685Z,1516713358.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:58.705Z,1516713358.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:59.086Z,1516713359.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:59.101Z,1516713359.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:59.479Z,1516713359.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:59.493Z,1516713359.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:15:59.876Z,1516713359.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:15:59.892Z,1516713359.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:00.286Z,1516713360.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:00.301Z,1516713360.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:00.687Z,1516713360.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:00.701Z,1516713360.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:01.086Z,1516713361.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:01.101Z,1516713361.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:01.477Z,1516713361.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:01.492Z,1516713361.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:01.878Z,1516713361.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:01.896Z,1516713361.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:02.287Z,1516713362.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:02.303Z,1516713362.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:02.686Z,1516713362.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:02.701Z,1516713362.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:03.088Z,1516713363.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:03.102Z,1516713363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:03.473Z,1516713363.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:03.500Z,1516713363.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:03.881Z,1516713363.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:03.896Z,1516713363.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:04.293Z,1516713364.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:04.313Z,1516713364.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:04.691Z,1516713364.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:04.705Z,1516713364.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:05.088Z,1516713365.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:05.103Z,1516713365.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:05.479Z,1516713365.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:05.500Z,1516713365.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:05.883Z,1516713365.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:05.908Z,1516713365.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:06.294Z,1516713366.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:06.317Z,1516713366.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:06.700Z,1516713366.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:06.715Z,1516713366.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:11.311Z,1516713371.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:11.327Z,1516713371.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:11.428Z,1516713371.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:11.460Z,1516713371.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:11.792Z,1516713371.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:11.837Z,1516713371.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:12.222Z,1516713372.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:12.237Z,1516713372.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:12.587Z,1516713372.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:12.624Z,1516713372.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:13.015Z,1516713373.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:13.049Z,1516713373.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:13.397Z,1516713373.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:13.462Z,1516713373.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:13.819Z,1516713373.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:13.863Z,1516713373.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:14.203Z,1516713374.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:14.237Z,1516713374.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:14.590Z,1516713374.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:14.648Z,1516713374.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:15.003Z,1516713375.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:15.042Z,1516713375.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:15.398Z,1516713375.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:15.449Z,1516713375.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:15.802Z,1516713375.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:15.850Z,1516713375.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:16.195Z,1516713376.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:16.248Z,1516713376.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:16.604Z,1516713376.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:16.654Z,1516713376.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:17.005Z,1516713377.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:17.059Z,1516713377.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:17.406Z,1516713377.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:17.452Z,1516713377.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:17.799Z,1516713377.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:17.846Z,1516713377.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:18.199Z,1516713378.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:18.252Z,1516713378.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:18.607Z,1516713378.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:18.649Z,1516713378.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:18.999Z,1516713378.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:19.018Z,1516713379.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:19.404Z,1516713379.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:19.425Z,1516713379.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:19.809Z,1516713379.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:19.864Z,1516713379.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:20.209Z,1516713380.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:20.255Z,1516713380.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:20.590Z,1516713380.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:20.667Z,1516713380.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:20.986Z,1516713380.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:21.022Z,1516713381.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:21.408Z,1516713381.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:21.465Z,1516713381.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:21.800Z,1516713381.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:21.873Z,1516713381.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:22.202Z,1516713382.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:22.243Z,1516713382.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:22.626Z,1516713382.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:22.677Z,1516713382.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:23.005Z,1516713383.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:23.072Z,1516713383.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:23.404Z,1516713383.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:23.459Z,1516713383.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:23.800Z,1516713383.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:23.841Z,1516713383.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:24.197Z,1516713384.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:24.254Z,1516713384.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:24.598Z,1516713384.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:24.613Z,1516713384.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:25.007Z,1516713385.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:25.024Z,1516713385.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:25.404Z,1516713385.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:25.423Z,1516713385.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:25.806Z,1516713385.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:25.829Z,1516713385.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:26.217Z,1516713386.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:26.233Z,1516713386.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:26.597Z,1516713386.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:26.637Z,1516713386.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:26.990Z,1516713386.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:27.005Z,1516713387.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:27.389Z,1516713387.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:27.408Z,1516713387.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:27.801Z,1516713387.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:27.817Z,1516713387.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:28.190Z,1516713388.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:28.214Z,1516713388.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:28.607Z,1516713388.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:28.645Z,1516713388.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:29.003Z,1516713389.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:29.018Z,1516713389.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:29.402Z,1516713389.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:29.421Z,1516713389.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:29.791Z,1516713389.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:29.822Z,1516713389.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:30.198Z,1516713390.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:30.213Z,1516713390.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:30.589Z,1516713390.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:30.612Z,1516713390.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:30.987Z,1516713390.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:31.020Z,1516713391.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:31.404Z,1516713391.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:31.425Z,1516713391.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:31.807Z,1516713391.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:31.822Z,1516713391.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:32.203Z,1516713392.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:32.218Z,1516713392.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:32.588Z,1516713392.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:32.625Z,1516713392.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:32.996Z,1516713392.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:33.016Z,1516713393.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:33.392Z,1516713393.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:33.414Z,1516713393.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:33.786Z,1516713393.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:33.822Z,1516713393.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:34.185Z,1516713394.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:34.221Z,1516713394.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:34.608Z,1516713394.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:34.623Z,1516713394.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:35.004Z,1516713395.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:35.044Z,1516713395.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:35.400Z,1516713395.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:35.427Z,1516713395.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:35.784Z,1516713395.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:35.821Z,1516713395.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:36.189Z,1516713396.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:36.225Z,1516713396.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:36.593Z,1516713396.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:36.609Z,1516713396.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:36.991Z,1516713396.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:37.007Z,1516713397.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:37.399Z,1516713397.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:37.415Z,1516713397.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:37.807Z,1516713397.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:37.843Z,1516713397.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:38.207Z,1516713398.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:38.243Z,1516713398.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:38.595Z,1516713398.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:38.610Z,1516713398.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:38.988Z,1516713398.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:39.022Z,1516713399.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:39.393Z,1516713399.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:39.409Z,1516713399.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:39.795Z,1516713399.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:39.811Z,1516713399.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:40.193Z,1516713400.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:40.209Z,1516713400.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:40.598Z,1516713400.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:40.621Z,1516713400.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:41.007Z,1516713401.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:41.023Z,1516713401.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:41.405Z,1516713401.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:41.421Z,1516713401.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:41.789Z,1516713401.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:41.813Z,1516713401.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:42.194Z,1516713402.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:42.209Z,1516713402.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:42.588Z,1516713402.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:42.625Z,1516713402.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:42.983Z,1516713402.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:43.021Z,1516713403.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:43.405Z,1516713403.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:43.433Z,1516713403.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:43.809Z,1516713403.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:43.824Z,1516713403.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:44.200Z,1516713404.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:44.232Z,1516713404.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:44.584Z,1516713404.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:44.619Z,1516713404.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:44.988Z,1516713404.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:45.016Z,1516713405.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:45.384Z,1516713405.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:45.418Z,1516713405.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:45.785Z,1516713405.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:45.825Z,1516713405.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:46.184Z,1516713406.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:46.221Z,1516713406.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:46.595Z,1516713406.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:46.627Z,1516713406.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:47.003Z,1516713407.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:47.039Z,1516713407.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:47.403Z,1516713407.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:47.426Z,1516713407.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:47.796Z,1516713407.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:47.831Z,1516713407.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:48.196Z,1516713408.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:48.236Z,1516713408.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:48.593Z,1516713408.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:48.609Z,1516713408.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:48.993Z,1516713408.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:49.008Z,1516713409.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:49.399Z,1516713409.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:49.414Z,1516713409.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:49.807Z,1516713409.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:49.822Z,1516713409.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:50.198Z,1516713410.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:50.221Z,1516713410.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:50.594Z,1516713410.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:50.609Z,1516713410.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:50.988Z,1516713410.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:51.011Z,1516713411.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:51.400Z,1516713411.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:51.423Z,1516713411.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:51.807Z,1516713411.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:51.821Z,1516713411.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:52.203Z,1516713412.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:52.218Z,1516713412.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:52.589Z,1516713412.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:52.612Z,1516713412.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:52.994Z,1516713412.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:53.016Z,1516713413.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:53.407Z,1516713413.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:53.422Z,1516713413.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:53.806Z,1516713413.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:53.821Z,1516713413.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:54.204Z,1516713414.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:54.225Z,1516713414.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:54.592Z,1516713414.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:54.612Z,1516713414.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:54.987Z,1516713414.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:55.020Z,1516713415.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:55.404Z,1516713415.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:55.419Z,1516713415.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:55.806Z,1516713415.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:55.821Z,1516713415.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:56.203Z,1516713416.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:56.218Z,1516713416.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:56.594Z,1516713416.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:56.616Z,1516713416.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:56.988Z,1516713416.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:57.013Z,1516713417.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:57.402Z,1516713417.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:57.418Z,1516713417.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:57.807Z,1516713417.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:57.829Z,1516713417.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:58.207Z,1516713418.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:58.222Z,1516713418.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:58.585Z,1516713418.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:58.613Z,1516713418.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:58.988Z,1516713418.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:59.016Z,1516713419.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:59.404Z,1516713419.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:59.419Z,1516713419.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:16:59.805Z,1516713419.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:16:59.832Z,1516713419.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:00.198Z,1516713420.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:00.225Z,1516713420.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:00.589Z,1516713420.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:00.621Z,1516713420.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:00.983Z,1516713420.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:01.020Z,1516713421.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:01.396Z,1516713421.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:01.436Z,1516713421.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:01.812Z,1516713421.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:01.827Z,1516713421.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:02.195Z,1516713422.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:02.221Z,1516713422.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:02.585Z,1516713422.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:02.629Z,1516713422.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:02.988Z,1516713422.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:03.024Z,1516713423.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:03.395Z,1516713423.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:03.421Z,1516713423.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:03.799Z,1516713423.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:03.829Z,1516713423.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:04.199Z,1516713424.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:04.226Z,1516713424.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:04.585Z,1516713424.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:04.600Z,1516713424.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:04.984Z,1516713424.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:05.004Z,1516713425.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:05.403Z,1516713425.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:05.428Z,1516713425.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:05.818Z,1516713425.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:05.833Z,1516713425.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:06.202Z,1516713426.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:06.234Z,1516713426.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:06.593Z,1516713426.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:06.608Z,1516713426.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:06.993Z,1516713426.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:07.008Z,1516713427.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:10.092Z,1516713430.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:10.108Z,1516713430.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:10.215Z,1516713430.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:10.245Z,1516713430.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:10.594Z,1516713430.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:10.617Z,1516713430.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:10.987Z,1516713430.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:11.002Z,1516713431.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:11.373Z,1516713431.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:11.400Z,1516713431.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:11.786Z,1516713431.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:11.801Z,1516713431.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:12.187Z,1516713432.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:12.202Z,1516713432.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:12.593Z,1516713432.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:12.608Z,1516713432.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:12.999Z,1516713432.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:13.014Z,1516713433.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:13.399Z,1516713433.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:13.413Z,1516713433.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:13.772Z,1516713433.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:13.805Z,1516713433.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:14.184Z,1516713434.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:14.204Z,1516713434.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:14.574Z,1516713434.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:14.602Z,1516713434.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:14.967Z,1516713434.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:15.006Z,1516713435.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:15.395Z,1516713435.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:15.411Z,1516713435.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:15.800Z,1516713435.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:15.815Z,1516713435.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:16.193Z,1516713436.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:16.208Z,1516713436.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:16.587Z,1516713436.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:16.602Z,1516713436.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:16.991Z,1516713436.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:17.005Z,1516713437.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:17.384Z,1516713437.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:17.417Z,1516713437.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:17.800Z,1516713437.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:17.815Z,1516713437.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:18.196Z,1516713438.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:18.211Z,1516713438.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:18.569Z,1516713438.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:18.602Z,1516713438.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:18.990Z,1516713438.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:19.006Z,1516713439.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:19.377Z,1516713439.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:19.405Z,1516713439.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:19.792Z,1516713439.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:19.808Z,1516713439.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:20.200Z,1516713440.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:20.221Z,1516713440.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:20.594Z,1516713440.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:20.612Z,1516713440.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:20.966Z,1516713440.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:20.994Z,1516713440.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:21.376Z,1516713441.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:21.409Z,1516713441.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:21.777Z,1516713441.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:21.806Z,1516713441.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:22.176Z,1516713442.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:22.204Z,1516713442.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:22.596Z,1516713442.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:22.617Z,1516713442.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:22.000Z,1516713443.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:23.020Z,1516713443.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:23.379Z,1516713443.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:23.417Z,1516713443.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:23.776Z,1516713443.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:23.803Z,1516713443.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:24.176Z,1516713444.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:24.204Z,1516713444.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:24.566Z,1516713444.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:24.581Z,1516713444.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:24.977Z,1516713444.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:25.008Z,1516713445.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:25.380Z,1516713445.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:25.408Z,1516713445.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:25.783Z,1516713445.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:25.810Z,1516713445.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:26.199Z,1516713446.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:26.214Z,1516713446.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:26.601Z,1516713446.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:26.615Z,1516713446.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:26.966Z,1516713446.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:26.981Z,1516713446.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:27.376Z,1516713447.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:27.413Z,1516713447.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:27.777Z,1516713447.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:27.812Z,1516713447.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:28.173Z,1516713448.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:28.189Z,1516713448.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:28.587Z,1516713448.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:28.618Z,1516713448.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:28.991Z,1516713448.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:29.025Z,1516713449.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:29.379Z,1516713449.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:29.394Z,1516713449.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:29.780Z,1516713449.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:29.801Z,1516713449.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:30.178Z,1516713450.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:30.192Z,1516713450.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:30.573Z,1516713450.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:30.592Z,1516713450.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:30.978Z,1516713450.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:30.993Z,1516713450.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:31.378Z,1516713451.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:31.399Z,1516713451.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:31.791Z,1516713451.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:31.806Z,1516713451.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:32.195Z,1516713452.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:32.210Z,1516713452.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:32.587Z,1516713452.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:32.608Z,1516713452.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:32.970Z,1516713452.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:32.997Z,1516713452.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:33.379Z,1516713453.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:33.394Z,1516713453.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:33.789Z,1516713453.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:33.804Z,1516713453.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:34.185Z,1516713454.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:34.205Z,1516713454.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:34.591Z,1516713454.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:34.606Z,1516713454.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:34.990Z,1516713454.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:35.012Z,1516713455.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:35.386Z,1516713455.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:35.401Z,1516713455.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:35.781Z,1516713455.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:35.796Z,1516713455.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:36.187Z,1516713456.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:36.202Z,1516713456.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:36.566Z,1516713456.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:36.597Z,1516713456.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:36.982Z,1516713456.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:36.997Z,1516713456.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:37.390Z,1516713457.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:37.404Z,1516713457.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:37.791Z,1516713457.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:37.813Z,1516713457.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:38.194Z,1516713458.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:38.217Z,1516713458.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:38.595Z,1516713458.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:38.609Z,1516713458.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:38.966Z,1516713458.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:38.997Z,1516713458.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:39.372Z,1516713459.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:39.399Z,1516713459.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:39.790Z,1516713459.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:39.805Z,1516713459.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:40.176Z,1516713460.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:40.203Z,1516713460.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:40.596Z,1516713460.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:40.611Z,1516713460.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:41.003Z,1516713461.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:41.017Z,1516713461.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:41.388Z,1516713461.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:41.403Z,1516713461.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:41.790Z,1516713461.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:41.812Z,1516713461.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:42.177Z,1516713462.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:42.208Z,1516713462.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:42.566Z,1516713462.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:42.597Z,1516713462.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:42.977Z,1516713462.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:43.004Z,1516713463.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:43.376Z,1516713463.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:43.404Z,1516713463.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:43.792Z,1516713463.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:43.807Z,1516713463.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:44.200Z,1516713464.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:44.214Z,1516713464.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:44.596Z,1516713464.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:44.616Z,1516713464.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:44.967Z,1516713464.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:44.982Z,1516713464.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:45.376Z,1516713465.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:45.409Z,1516713465.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:45.781Z,1516713465.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:45.809Z,1516713465.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:46.180Z,1516713466.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:46.206Z,1516713466.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:46.596Z,1516713466.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:46.611Z,1516713466.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:47.000Z,1516713467.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:47.020Z,1516713467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:47.379Z,1516713467.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:47.406Z,1516713467.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:47.776Z,1516713467.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:47.809Z,1516713467.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:48.180Z,1516713468.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:48.208Z,1516713468.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:48.567Z,1516713468.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:48.605Z,1516713468.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:48.974Z,1516713468.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:49.009Z,1516713469.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:49.373Z,1516713469.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:49.388Z,1516713469.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:49.791Z,1516713469.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:49.816Z,1516713469.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:50.195Z,1516713470.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:50.225Z,1516713470.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:50.592Z,1516713470.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:50.617Z,1516713470.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:50.971Z,1516713470.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:50.987Z,1516713470.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:51.380Z,1516713471.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:51.417Z,1516713471.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:51.775Z,1516713471.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:51.789Z,1516713471.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:52.179Z,1516713472.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:52.194Z,1516713472.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:52.584Z,1516713472.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:52.621Z,1516713472.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:52.991Z,1516713472.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:53.006Z,1516713473.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:53.380Z,1516713473.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:53.395Z,1516713473.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:53.783Z,1516713473.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:53.805Z,1516713473.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:54.182Z,1516713474.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:54.197Z,1516713474.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:54.573Z,1516713474.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:54.594Z,1516713474.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:54.983Z,1516713474.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:54.999Z,1516713474.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:55.382Z,1516713475.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:55.397Z,1516713475.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:55.795Z,1516713475.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:55.830Z,1516713475.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:56.195Z,1516713476.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:56.231Z,1516713476.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:56.587Z,1516713476.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:56.609Z,1516713476.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:56.969Z,1516713476.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:57.001Z,1516713477.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:57.007Z,1516713477.007 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:57.007Z,1516713477.007 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200 2018-01-23T13:17:57.007Z,1516713477.007 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:17:57.032Z,1516713477.032 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:17:57.386Z,1516713477.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:57.401Z,1516713477.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:57.414Z,1516713477.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:17:57.414Z,1516713477.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200 2018-01-23T13:17:57.788Z,1516713477.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:57.802Z,1516713477.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:57.803Z,1516713477.803 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:17:57.804Z,1516713477.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:17:57.804Z,1516713477.804 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:17:58.168Z,1516713478.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:58.205Z,1516713478.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:58.205Z,1516713478.205 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200 2018-01-23T13:17:58.205Z,1516713478.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:17:58.211Z,1516713478.211 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:58.211Z,1516713478.211 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 200 2018-01-23T13:17:58.211Z,1516713478.211 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:17:58.228Z,1516713478.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:17:58.228Z,1516713478.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:17:58.600Z,1516713478.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:58.652Z,1516713478.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:17:58.652Z,1516713478.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200 2018-01-23T13:17:58.652Z,1516713478.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:17:58.652Z,1516713478.652 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 200 2018-01-23T13:17:59.001Z,1516713479.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:59.015Z,1516713479.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:17:59.016Z,1516713479.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:17:59.016Z,1516713479.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:17:59.016Z,1516713479.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:17:59.017Z,1516713479.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:17:59.017Z,1516713479.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:17:59.379Z,1516713479.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:59.417Z,1516713479.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:17:59.418Z,1516713479.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:17:59.776Z,1516713479.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:17:59.810Z,1516713479.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:17:59.811Z,1516713479.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:00.176Z,1516713480.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:00.212Z,1516713480.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:18:00.213Z,1516713480.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:00.566Z,1516713480.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:00.581Z,1516713480.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:18:00.582Z,1516713480.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:00.977Z,1516713480.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:01.012Z,1516713481.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:18:01.013Z,1516713481.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:01.376Z,1516713481.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:01.391Z,1516713481.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:18:01.392Z,1516713481.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:01.787Z,1516713481.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:01.812Z,1516713481.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:18:01.813Z,1516713481.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:02.202Z,1516713482.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:02.224Z,1516713482.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:18:02.225Z,1516713482.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:02.591Z,1516713482.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:02.617Z,1516713482.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:18:02.618Z,1516713482.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:02.969Z,1516713482.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:03.004Z,1516713483.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:18:03.005Z,1516713483.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:03.376Z,1516713483.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:03.402Z,1516713483.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:18:03.403Z,1516713483.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:03.777Z,1516713483.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:03.805Z,1516713483.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:18:03.806Z,1516713483.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:04.173Z,1516713484.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:04.204Z,1516713484.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:18:04.205Z,1516713484.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:04.596Z,1516713484.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:04.611Z,1516713484.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:18:04.612Z,1516713484.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:05.000Z,1516713485.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:05.014Z,1516713485.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:18:05.015Z,1516713485.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:05.379Z,1516713485.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:05.413Z,1516713485.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:18:05.414Z,1516713485.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:05.780Z,1516713485.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:05.806Z,1516713485.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:18:05.808Z,1516713485.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:06.180Z,1516713486.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:06.212Z,1516713486.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:18:06.213Z,1516713486.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:06.566Z,1516713486.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:06.581Z,1516713486.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:18:06.582Z,1516713486.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:06.978Z,1516713486.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:07.009Z,1516713487.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:18:07.010Z,1516713487.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:07.381Z,1516713487.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:07.408Z,1516713487.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:18:07.409Z,1516713487.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:10.571Z,1516713490.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:10.586Z,1516713490.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:18:10.603Z,1516713490.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:10.703Z,1516713490.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:10.736Z,1516713490.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T13:18:10.737Z,1516713490.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:11.083Z,1516713491.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:11.108Z,1516713491.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T13:18:11.109Z,1516713491.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:11.470Z,1516713491.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:11.488Z,1516713491.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T13:18:11.489Z,1516713491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:11.870Z,1516713491.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:11.885Z,1516713491.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T13:18:11.886Z,1516713491.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:12.268Z,1516713492.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:12.282Z,1516713492.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T13:18:12.283Z,1516713492.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:12.672Z,1516713492.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:12.686Z,1516713492.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T13:18:12.687Z,1516713492.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:13.075Z,1516713493.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:13.090Z,1516713493.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T13:18:13.091Z,1516713493.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:13.471Z,1516713493.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:13.492Z,1516713493.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T13:18:13.493Z,1516713493.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:13.870Z,1516713493.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:13.884Z,1516713493.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T13:18:13.885Z,1516713493.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:14.267Z,1516713494.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:14.282Z,1516713494.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T13:18:14.283Z,1516713494.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:14.668Z,1516713494.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:14.682Z,1516713494.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T13:18:14.683Z,1516713494.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:15.066Z,1516713495.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:15.089Z,1516713495.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T13:18:15.090Z,1516713495.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:15.479Z,1516713495.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:15.493Z,1516713495.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T13:18:15.494Z,1516713495.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:15.882Z,1516713495.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:15.896Z,1516713495.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T13:18:15.897Z,1516713495.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:16.279Z,1516713496.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:16.293Z,1516713496.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T13:18:16.294Z,1516713496.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:16.677Z,1516713496.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:16.692Z,1516713496.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T13:18:16.693Z,1516713496.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:17.060Z,1516713497.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:17.096Z,1516713497.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T13:18:17.097Z,1516713497.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:17.476Z,1516713497.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:17.503Z,1516713497.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T13:18:17.504Z,1516713497.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:17.887Z,1516713497.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:17.901Z,1516713497.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T13:18:17.902Z,1516713497.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:18.280Z,1516713498.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:18.294Z,1516713498.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:18.658Z,1516713498.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:18.686Z,1516713498.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:19.065Z,1516713499.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:19.091Z,1516713499.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:19.460Z,1516713499.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:19.498Z,1516713499.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:19.883Z,1516713499.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:19.899Z,1516713499.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:20.282Z,1516713500.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:20.297Z,1516713500.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:20.680Z,1516713500.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:20.700Z,1516713500.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:21.060Z,1516713501.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:21.092Z,1516713501.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:21.460Z,1516713501.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:21.493Z,1516713501.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:21.861Z,1516713501.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:21.898Z,1516713501.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:22.258Z,1516713502.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:22.281Z,1516713502.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:22.671Z,1516713502.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:22.706Z,1516713502.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:23.091Z,1516713503.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:23.170Z,1516713503.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:23.471Z,1516713503.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:23.497Z,1516713503.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:23.860Z,1516713503.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:23.897Z,1516713503.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:24.265Z,1516713504.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:24.309Z,1516713504.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:24.658Z,1516713504.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:24.673Z,1516713504.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:25.073Z,1516713505.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:25.104Z,1516713505.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:25.472Z,1516713505.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:25.506Z,1516713505.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:25.879Z,1516713505.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:25.905Z,1516713505.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:26.295Z,1516713506.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:26.309Z,1516713506.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:26.692Z,1516713506.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:26.708Z,1516713506.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:27.068Z,1516713507.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:27.104Z,1516713507.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:27.468Z,1516713507.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:27.504Z,1516713507.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:27.870Z,1516713507.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:27.901Z,1516713507.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:28.269Z,1516713508.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:28.305Z,1516713508.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:28.697Z,1516713508.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:28.712Z,1516713508.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:29.087Z,1516713509.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:29.114Z,1516713509.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:29.471Z,1516713509.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:29.486Z,1516713509.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:29.866Z,1516713509.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:29.888Z,1516713509.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:30.266Z,1516713510.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:30.292Z,1516713510.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:30.670Z,1516713510.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:30.685Z,1516713510.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:31.068Z,1516713511.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:31.083Z,1516713511.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:31.466Z,1516713511.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:31.489Z,1516713511.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:31.872Z,1516713511.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:31.887Z,1516713511.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:32.275Z,1516713512.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:32.290Z,1516713512.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:32.672Z,1516713512.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:32.687Z,1516713512.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:33.068Z,1516713513.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:33.083Z,1516713513.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:33.468Z,1516713513.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:33.482Z,1516713513.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:33.866Z,1516713513.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:33.889Z,1516713513.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:34.273Z,1516713514.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:34.288Z,1516713514.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:34.674Z,1516713514.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:34.689Z,1516713514.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:35.079Z,1516713515.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:35.101Z,1516713515.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:35.479Z,1516713515.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:35.494Z,1516713515.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:35.877Z,1516713515.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:35.891Z,1516713515.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:36.278Z,1516713516.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:36.293Z,1516713516.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:36.670Z,1516713516.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:36.685Z,1516713516.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:37.067Z,1516713517.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:37.097Z,1516713517.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:37.470Z,1516713517.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:37.500Z,1516713517.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:37.883Z,1516713517.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:37.898Z,1516713517.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:38.280Z,1516713518.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:38.307Z,1516713518.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:38.682Z,1516713518.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:38.697Z,1516713518.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:39.068Z,1516713519.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:39.092Z,1516713519.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:39.483Z,1516713519.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:39.505Z,1516713519.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:39.862Z,1516713519.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:39.894Z,1516713519.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:40.261Z,1516713520.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:40.298Z,1516713520.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:40.685Z,1516713520.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:40.700Z,1516713520.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:41.082Z,1516713521.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:41.102Z,1516713521.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:41.476Z,1516713521.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:41.499Z,1516713521.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:41.860Z,1516713521.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:41.897Z,1516713521.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:42.264Z,1516713522.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:42.301Z,1516713522.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:42.664Z,1516713522.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:42.701Z,1516713522.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:43.061Z,1516713523.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:43.077Z,1516713523.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:43.460Z,1516713523.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:43.481Z,1516713523.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:43.879Z,1516713523.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:43.913Z,1516713523.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:44.296Z,1516713524.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:44.311Z,1516713524.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:44.675Z,1516713524.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:44.706Z,1516713524.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:45.072Z,1516713525.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:45.113Z,1516713525.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:45.464Z,1516713525.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:45.485Z,1516713525.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:45.870Z,1516713525.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:45.885Z,1516713525.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:46.265Z,1516713526.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:46.292Z,1516713526.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:46.675Z,1516713526.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:46.691Z,1516713526.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:47.076Z,1516713527.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:47.096Z,1516713527.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:47.479Z,1516713527.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:47.494Z,1516713527.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:47.869Z,1516713527.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:47.884Z,1516713527.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:48.269Z,1516713528.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:48.292Z,1516713528.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:48.668Z,1516713528.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:48.684Z,1516713528.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:49.064Z,1516713529.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:49.090Z,1516713529.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:49.469Z,1516713529.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:49.485Z,1516713529.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:49.879Z,1516713529.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:49.894Z,1516713529.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:50.282Z,1516713530.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:50.298Z,1516713530.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:50.680Z,1516713530.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:50.694Z,1516713530.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:51.068Z,1516713531.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:51.089Z,1516713531.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:51.464Z,1516713531.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:51.485Z,1516713531.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:51.870Z,1516713531.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:51.884Z,1516713531.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:52.264Z,1516713532.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:52.286Z,1516713532.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:52.679Z,1516713532.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:52.693Z,1516713532.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:53.082Z,1516713533.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:53.104Z,1516713533.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:53.482Z,1516713533.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:53.501Z,1516713533.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:53.867Z,1516713533.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:53.886Z,1516713533.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:54.269Z,1516713534.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:54.288Z,1516713534.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:54.664Z,1516713534.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:54.686Z,1516713534.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:55.065Z,1516713535.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:55.087Z,1516713535.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:55.469Z,1516713535.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:55.488Z,1516713535.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:55.879Z,1516713535.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:55.894Z,1516713535.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:56.282Z,1516713536.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:56.297Z,1516713536.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:56.682Z,1516713536.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:56.697Z,1516713536.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:57.073Z,1516713537.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:57.093Z,1516713537.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:57.464Z,1516713537.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:57.497Z,1516713537.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:57.861Z,1516713537.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:57.898Z,1516713537.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:58.260Z,1516713538.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:58.296Z,1516713538.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:58.671Z,1516713538.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:58.706Z,1516713538.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:59.085Z,1516713539.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:59.099Z,1516713539.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:59.471Z,1516713539.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:59.507Z,1516713539.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:18:59.860Z,1516713539.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:18:59.896Z,1516713539.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:00.259Z,1516713540.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:00.297Z,1516713540.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:00.664Z,1516713540.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:00.696Z,1516713540.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:01.061Z,1516713541.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:01.088Z,1516713541.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:01.460Z,1516713541.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:01.475Z,1516713541.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:01.871Z,1516713541.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:01.902Z,1516713541.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:02.283Z,1516713542.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:02.317Z,1516713542.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:02.675Z,1516713542.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:02.712Z,1516713542.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:03.068Z,1516713543.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:03.105Z,1516713543.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:03.468Z,1516713543.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:03.489Z,1516713543.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:03.869Z,1516713543.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:03.888Z,1516713543.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:04.270Z,1516713544.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:04.285Z,1516713544.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:04.671Z,1516713544.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:04.686Z,1516713544.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:05.075Z,1516713545.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:05.090Z,1516713545.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:05.483Z,1516713545.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:05.498Z,1516713545.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:05.872Z,1516713545.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:05.887Z,1516713545.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:06.273Z,1516713546.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:06.288Z,1516713546.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:06.672Z,1516713546.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:06.687Z,1516713546.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:07.068Z,1516713547.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:07.087Z,1516713547.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:07.470Z,1516713547.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:07.485Z,1516713547.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:10.580Z,1516713550.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:10.601Z,1516713550.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:10.714Z,1516713550.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:10.752Z,1516713550.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:11.091Z,1516713551.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:11.106Z,1516713551.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:11.482Z,1516713551.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:11.497Z,1516713551.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:11.876Z,1516713551.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:11.891Z,1516713551.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:12.276Z,1516713552.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:12.296Z,1516713552.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:12.679Z,1516713552.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:12.695Z,1516713552.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:13.083Z,1516713553.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:13.098Z,1516713553.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:13.479Z,1516713553.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:13.500Z,1516713553.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:13.878Z,1516713553.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:13.897Z,1516713553.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:14.274Z,1516713554.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:14.298Z,1516713554.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:14.676Z,1516713554.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:14.691Z,1516713554.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:15.077Z,1516713555.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:15.092Z,1516713555.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:15.474Z,1516713555.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:15.493Z,1516713555.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:15.887Z,1516713555.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:15.902Z,1516713555.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:16.291Z,1516713556.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:16.306Z,1516713556.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:16.688Z,1516713556.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:16.702Z,1516713556.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:17.079Z,1516713557.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:17.094Z,1516713557.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:17.478Z,1516713557.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:17.501Z,1516713557.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:17.876Z,1516713557.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:17.896Z,1516713557.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:18.279Z,1516713558.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:18.294Z,1516713558.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:18.688Z,1516713558.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:18.703Z,1516713558.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:19.087Z,1516713559.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:19.101Z,1516713559.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:19.488Z,1516713559.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:19.508Z,1516713559.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:19.876Z,1516713559.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:19.896Z,1516713559.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:20.273Z,1516713560.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:20.296Z,1516713560.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:20.676Z,1516713560.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:20.708Z,1516713560.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:21.078Z,1516713561.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:21.093Z,1516713561.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:21.472Z,1516713561.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:21.499Z,1516713561.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:21.856Z,1516713561.856 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T13:19:21.856Z,1516713561.856 [NAL9602] Data Fault, FailCount= 5 2018-01-23T13:19:21.856Z,1516713561.856 [NAL9602](ERROR): Data Fault 2018-01-23T13:19:21.894Z,1516713561.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:21.909Z,1516713561.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:21.938Z,1516713561.938 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T13:19:21.938Z,1516713561.938 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T13:19:22.252Z,1516713562.252 [NAL9602](INFO): Powering down 2018-01-23T13:19:22.269Z,1516713562.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:22.294Z,1516713562.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:22.314Z,1516713562.314 [CBIT](INFO): Critical error at 20180123T131921 2018-01-23T13:19:22.668Z,1516713562.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:22.705Z,1516713562.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:23.068Z,1516713563.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:23.107Z,1516713563.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:23.465Z,1516713563.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:23.480Z,1516713563.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:23.868Z,1516713563.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:23.883Z,1516713563.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:24.272Z,1516713564.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:24.286Z,1516713564.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:24.673Z,1516713564.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:24.688Z,1516713564.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:25.080Z,1516713565.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:25.095Z,1516713565.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:25.475Z,1516713565.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:25.489Z,1516713565.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:25.873Z,1516713565.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:25.888Z,1516713565.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:26.273Z,1516713566.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:26.297Z,1516713566.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:26.675Z,1516713566.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:26.690Z,1516713566.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:27.075Z,1516713567.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:27.090Z,1516713567.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:27.472Z,1516713567.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:27.501Z,1516713567.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:27.875Z,1516713567.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:27.891Z,1516713567.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:28.274Z,1516713568.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:28.290Z,1516713568.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:28.674Z,1516713568.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:28.698Z,1516713568.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:29.079Z,1516713569.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:29.094Z,1516713569.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:29.473Z,1516713569.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:29.488Z,1516713569.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:29.872Z,1516713569.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:29.895Z,1516713569.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:30.275Z,1516713570.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:30.289Z,1516713570.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:30.665Z,1516713570.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:30.691Z,1516713570.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:31.071Z,1516713571.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:31.102Z,1516713571.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:31.475Z,1516713571.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:31.496Z,1516713571.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:31.875Z,1516713571.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:31.890Z,1516713571.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:32.271Z,1516713572.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:32.302Z,1516713572.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:32.675Z,1516713572.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:32.689Z,1516713572.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:33.075Z,1516713573.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:33.090Z,1516713573.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:33.471Z,1516713573.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:33.502Z,1516713573.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:33.875Z,1516713573.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:33.890Z,1516713573.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:34.275Z,1516713574.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:34.290Z,1516713574.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:34.671Z,1516713574.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:34.702Z,1516713574.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:35.075Z,1516713575.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:35.090Z,1516713575.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:35.465Z,1516713575.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:35.496Z,1516713575.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:35.871Z,1516713575.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:35.894Z,1516713575.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:36.275Z,1516713576.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:36.296Z,1516713576.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:36.665Z,1516713576.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:36.691Z,1516713576.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:37.071Z,1516713577.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:37.102Z,1516713577.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:37.475Z,1516713577.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:37.490Z,1516713577.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:37.875Z,1516713577.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:37.890Z,1516713577.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:38.271Z,1516713578.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:38.302Z,1516713578.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:38.675Z,1516713578.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:38.690Z,1516713578.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:39.075Z,1516713579.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:39.090Z,1516713579.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:39.471Z,1516713579.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:39.494Z,1516713579.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:39.876Z,1516713579.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:39.896Z,1516713579.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:40.276Z,1516713580.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:40.292Z,1516713580.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:40.671Z,1516713580.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:40.702Z,1516713580.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:41.075Z,1516713581.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:41.090Z,1516713581.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:41.465Z,1516713581.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:41.497Z,1516713581.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:41.868Z,1516713581.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:41.899Z,1516713581.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:42.268Z,1516713582.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:42.282Z,1516713582.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:42.665Z,1516713582.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:42.680Z,1516713582.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:43.068Z,1516713583.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:43.083Z,1516713583.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:43.472Z,1516713583.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:43.486Z,1516713583.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:43.872Z,1516713583.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:43.887Z,1516713583.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:44.272Z,1516713584.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:44.293Z,1516713584.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:44.672Z,1516713584.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:44.687Z,1516713584.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:45.080Z,1516713585.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:45.095Z,1516713585.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:45.480Z,1516713585.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:45.495Z,1516713585.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:45.874Z,1516713585.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:45.889Z,1516713585.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:46.274Z,1516713586.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:46.289Z,1516713586.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:46.674Z,1516713586.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:46.690Z,1516713586.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:47.074Z,1516713587.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:47.093Z,1516713587.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:47.472Z,1516713587.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:47.488Z,1516713587.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:47.870Z,1516713587.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:47.901Z,1516713587.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:48.276Z,1516713588.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:48.291Z,1516713588.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:48.672Z,1516713588.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:48.688Z,1516713588.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:49.072Z,1516713589.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:49.099Z,1516713589.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:49.475Z,1516713589.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:49.490Z,1516713589.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:49.874Z,1516713589.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:49.889Z,1516713589.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:50.272Z,1516713590.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:50.295Z,1516713590.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:50.675Z,1516713590.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:50.690Z,1516713590.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:51.075Z,1516713591.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:51.090Z,1516713591.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:51.474Z,1516713591.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:51.497Z,1516713591.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:51.868Z,1516713591.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:51.894Z,1516713591.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:52.268Z,1516713592.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:52.300Z,1516713592.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:52.668Z,1516713592.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:52.700Z,1516713592.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:53.068Z,1516713593.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:53.102Z,1516713593.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:53.465Z,1516713593.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:53.496Z,1516713593.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:53.872Z,1516713593.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:53.898Z,1516713593.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:54.268Z,1516713594.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:54.302Z,1516713594.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:54.665Z,1516713594.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:54.688Z,1516713594.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:55.076Z,1516713595.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:55.102Z,1516713595.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:55.468Z,1516713595.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:55.501Z,1516713595.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:55.872Z,1516713595.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:55.898Z,1516713595.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:56.276Z,1516713596.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:56.302Z,1516713596.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:56.671Z,1516713596.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:56.698Z,1516713596.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:57.071Z,1516713597.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:57.099Z,1516713597.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:57.467Z,1516713597.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:57.505Z,1516713597.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:57.872Z,1516713597.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:57.906Z,1516713597.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:58.272Z,1516713598.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:58.303Z,1516713598.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:58.668Z,1516713598.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:58.705Z,1516713598.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:59.072Z,1516713599.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:59.087Z,1516713599.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:59.466Z,1516713599.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:59.481Z,1516713599.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:19:59.872Z,1516713599.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:19:59.893Z,1516713599.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:00.273Z,1516713600.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:00.287Z,1516713600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:00.673Z,1516713600.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:00.688Z,1516713600.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:01.074Z,1516713601.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:01.090Z,1516713601.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:01.472Z,1516713601.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:01.509Z,1516713601.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:01.873Z,1516713601.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:01.889Z,1516713601.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:02.272Z,1516713602.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:02.297Z,1516713602.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:02.677Z,1516713602.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:02.692Z,1516713602.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:03.075Z,1516713603.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:03.090Z,1516713603.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:03.471Z,1516713603.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:03.501Z,1516713603.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:03.877Z,1516713603.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:03.892Z,1516713603.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:04.275Z,1516713604.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:04.290Z,1516713604.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:04.675Z,1516713604.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:04.689Z,1516713604.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:05.074Z,1516713605.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:05.090Z,1516713605.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:05.473Z,1516713605.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:05.489Z,1516713605.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:05.874Z,1516713605.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:05.889Z,1516713605.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:06.274Z,1516713606.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:06.293Z,1516713606.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:06.296Z,1516713606.296 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:15:06.3Z 2018-01-23T13:20:06.297Z,1516713606.297 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T13:20:06.297Z,1516713606.297 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T13:20:06.672Z,1516713606.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:06.688Z,1516713606.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:07.200Z,1516713607.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:07.235Z,1516713607.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:07.479Z,1516713607.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:07.494Z,1516713607.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:10.615Z,1516713610.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:10.639Z,1516713610.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:10.715Z,1516713610.715 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0236.lzma 2018-01-23T13:20:10.745Z,1516713610.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:10.780Z,1516713610.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:11.086Z,1516713611.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:11.101Z,1516713611.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:11.461Z,1516713611.461 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0236.lzma.bak 2018-01-23T13:20:11.462Z,1516713611.462 [DataOverHttps](INFO): SBD MOMSN=7755630 2018-01-23T13:20:11.491Z,1516713611.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:11.518Z,1516713611.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:12.130Z,1516713612.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:12.152Z,1516713612.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:12.284Z,1516713612.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:12.309Z,1516713612.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:15.372Z,1516713615.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:15.400Z,1516713615.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:15.497Z,1516713615.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:15.512Z,1516713615.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:15.852Z,1516713615.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:15.867Z,1516713615.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:16.254Z,1516713616.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:16.269Z,1516713616.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:16.649Z,1516713616.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:16.664Z,1516713616.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:17.050Z,1516713617.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:17.071Z,1516713617.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:20.135Z,1516713620.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:20.160Z,1516713620.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:20.244Z,1516713620.244 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0237.lzma 2018-01-23T13:20:20.264Z,1516713620.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:20.279Z,1516713620.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:20.604Z,1516713620.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:20.627Z,1516713620.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:20.987Z,1516713620.987 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0237.lzma.bak 2018-01-23T13:20:20.988Z,1516713620.988 [DataOverHttps](INFO): SBD MOMSN=7755633 2018-01-23T13:20:21.026Z,1516713621.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:21.041Z,1516713621.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:21.643Z,1516713621.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:21.668Z,1516713621.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:21.671Z,1516713621.671 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T13:20:21.671Z,1516713621.671 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T13:20:21.671Z,1516713621.671 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T13:20:21.804Z,1516713621.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:21.839Z,1516713621.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:24.948Z,1516713624.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:24.973Z,1516713624.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:25.071Z,1516713625.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:25.086Z,1516713625.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:25.426Z,1516713625.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:25.441Z,1516713625.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:25.828Z,1516713625.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:25.843Z,1516713625.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:26.225Z,1516713626.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:26.240Z,1516713626.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:26.623Z,1516713626.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:26.645Z,1516713626.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:27.024Z,1516713627.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:27.043Z,1516713627.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:27.417Z,1516713627.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:27.441Z,1516713627.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:27.816Z,1516713627.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:27.845Z,1516713627.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:28.217Z,1516713628.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:28.253Z,1516713628.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:28.615Z,1516713628.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:28.642Z,1516713628.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:29.024Z,1516713629.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:29.050Z,1516713629.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:29.416Z,1516713629.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:29.450Z,1516713629.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:29.822Z,1516713629.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:29.841Z,1516713629.841 [PNI_TCM](ERROR): CRC does not match. Expected:0x3477 got:0x6466 2018-01-23T13:20:29.869Z,1516713629.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:30.218Z,1516713630.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:30.252Z,1516713630.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:30.620Z,1516713630.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:30.648Z,1516713630.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:31.014Z,1516713631.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:31.089Z,1516713631.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:31.436Z,1516713631.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:31.451Z,1516713631.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:31.819Z,1516713631.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:31.853Z,1516713631.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:32.222Z,1516713632.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:32.250Z,1516713632.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:32.616Z,1516713632.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:32.651Z,1516713632.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:33.017Z,1516713633.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:33.061Z,1516713633.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:33.417Z,1516713633.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:33.440Z,1516713633.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:33.818Z,1516713633.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:33.845Z,1516713633.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:34.216Z,1516713634.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:34.259Z,1516713634.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:34.613Z,1516713634.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:34.633Z,1516713634.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:35.018Z,1516713635.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:35.037Z,1516713635.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:35.421Z,1516713635.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:35.437Z,1516713635.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:35.820Z,1516713635.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:35.864Z,1516713635.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:36.230Z,1516713636.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:36.246Z,1516713636.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:36.627Z,1516713636.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:36.642Z,1516713636.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:37.024Z,1516713637.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:37.039Z,1516713637.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:37.422Z,1516713637.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:37.469Z,1516713637.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:37.822Z,1516713637.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:37.840Z,1516713637.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:38.225Z,1516713638.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:38.244Z,1516713638.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:38.624Z,1516713638.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:38.650Z,1516713638.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:39.016Z,1516713639.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:39.050Z,1516713639.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:39.413Z,1516713639.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:39.447Z,1516713639.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:39.816Z,1516713639.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:39.846Z,1516713639.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:40.218Z,1516713640.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:40.253Z,1516713640.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:40.613Z,1516713640.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:40.654Z,1516713640.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:41.024Z,1516713641.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:41.054Z,1516713641.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:41.453Z,1516713641.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:41.562Z,1516713641.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:41.820Z,1516713641.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:41.845Z,1516713641.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:42.216Z,1516713642.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:42.252Z,1516713642.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:42.616Z,1516713642.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:42.651Z,1516713642.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:43.013Z,1516713643.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:43.040Z,1516713643.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:43.417Z,1516713643.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:43.456Z,1516713643.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:43.820Z,1516713643.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:43.856Z,1516713643.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:44.252Z,1516713644.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:44.267Z,1516713644.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:44.616Z,1516713644.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:44.657Z,1516713644.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:45.021Z,1516713645.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:45.059Z,1516713645.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:45.413Z,1516713645.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:45.463Z,1516713645.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:45.824Z,1516713645.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:45.840Z,1516713645.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:46.220Z,1516713646.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:46.239Z,1516713646.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:46.616Z,1516713646.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:46.635Z,1516713646.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:47.028Z,1516713647.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:47.042Z,1516713647.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:47.424Z,1516713647.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:47.440Z,1516713647.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:47.824Z,1516713647.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:47.843Z,1516713647.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:48.224Z,1516713648.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:48.241Z,1516713648.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:48.622Z,1516713648.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:48.649Z,1516713648.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:49.020Z,1516713649.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:49.035Z,1516713649.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:49.422Z,1516713649.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:49.443Z,1516713649.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:49.825Z,1516713649.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:49.842Z,1516713649.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:50.222Z,1516713650.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:50.273Z,1516713650.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:50.622Z,1516713650.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:50.637Z,1516713650.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:51.022Z,1516713651.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:51.047Z,1516713651.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:51.420Z,1516713651.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:51.439Z,1516713651.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:51.823Z,1516713651.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:51.837Z,1516713651.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:52.222Z,1516713652.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:52.237Z,1516713652.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:52.622Z,1516713652.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:52.638Z,1516713652.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:53.022Z,1516713653.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:53.044Z,1516713653.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:53.422Z,1516713653.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:53.437Z,1516713653.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:53.823Z,1516713653.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:53.838Z,1516713653.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:54.222Z,1516713654.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:54.236Z,1516713654.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:54.620Z,1516713654.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:54.665Z,1516713654.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:55.021Z,1516713655.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:55.036Z,1516713655.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:55.418Z,1516713655.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:55.448Z,1516713655.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:55.820Z,1516713655.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:55.852Z,1516713655.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:56.216Z,1516713656.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:56.245Z,1516713656.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:56.616Z,1516713656.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:56.649Z,1516713656.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:57.028Z,1516713657.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:57.042Z,1516713657.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:57.416Z,1516713657.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:57.441Z,1516713657.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:57.816Z,1516713657.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:57.851Z,1516713657.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:57.853Z,1516713657.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:57.854Z,1516713657.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201 2018-01-23T13:20:57.854Z,1516713657.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:20:57.865Z,1516713657.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:20:58.216Z,1516713658.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:58.249Z,1516713658.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:58.262Z,1516713658.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:20:58.262Z,1516713658.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201 2018-01-23T13:20:58.616Z,1516713658.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:58.641Z,1516713658.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:58.643Z,1516713658.643 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:20:58.643Z,1516713658.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:20:58.644Z,1516713658.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:20:59.016Z,1516713659.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:59.051Z,1516713659.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:59.051Z,1516713659.051 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201 2018-01-23T13:20:59.051Z,1516713659.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:20:59.054Z,1516713659.054 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:20:59.054Z,1516713659.054 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 201 2018-01-23T13:20:59.054Z,1516713659.054 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:20:59.086Z,1516713659.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:20:59.086Z,1516713659.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:20:59.416Z,1516713659.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:59.458Z,1516713659.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:20:59.458Z,1516713659.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201 2018-01-23T13:20:59.459Z,1516713659.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:20:59.459Z,1516713659.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 201 2018-01-23T13:20:59.816Z,1516713659.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:20:59.841Z,1516713659.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:20:59.841Z,1516713659.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:20:59.841Z,1516713659.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:20:59.842Z,1516713659.842 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:20:59.842Z,1516713659.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:20:59.842Z,1516713659.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:21:00.220Z,1516713660.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:00.253Z,1516713660.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:21:00.254Z,1516713660.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:00.616Z,1516713660.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:00.642Z,1516713660.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:21:00.643Z,1516713660.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:01.016Z,1516713661.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:01.054Z,1516713661.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:21:01.059Z,1516713661.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:01.420Z,1516713661.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:01.444Z,1516713661.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:21:01.445Z,1516713661.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:01.816Z,1516713661.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:01.844Z,1516713661.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:21:01.845Z,1516713661.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:02.216Z,1516713662.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:02.230Z,1516713662.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:21:02.244Z,1516713662.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:02.616Z,1516713662.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:02.630Z,1516713662.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:21:02.631Z,1516713662.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:03.016Z,1516713663.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:03.031Z,1516713663.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:21:03.032Z,1516713663.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:03.420Z,1516713663.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:03.434Z,1516713663.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:21:03.435Z,1516713663.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:03.820Z,1516713663.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:03.834Z,1516713663.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:21:03.835Z,1516713663.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:04.222Z,1516713664.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:04.236Z,1516713664.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:21:04.237Z,1516713664.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:04.620Z,1516713664.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:04.638Z,1516713664.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:21:04.647Z,1516713664.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:05.022Z,1516713665.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:05.036Z,1516713665.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:21:05.037Z,1516713665.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:05.420Z,1516713665.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:05.443Z,1516713665.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:21:05.444Z,1516713665.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:05.823Z,1516713665.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:05.838Z,1516713665.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:21:05.839Z,1516713665.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:06.222Z,1516713666.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:06.236Z,1516713666.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:21:06.237Z,1516713666.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:06.622Z,1516713666.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:06.645Z,1516713666.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:21:06.646Z,1516713666.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:07.027Z,1516713667.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:07.042Z,1516713667.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:21:07.043Z,1516713667.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:07.423Z,1516713667.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:07.437Z,1516713667.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:21:07.438Z,1516713667.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:07.824Z,1516713667.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:07.839Z,1516713667.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:21:07.840Z,1516713667.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:08.223Z,1516713668.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:08.238Z,1516713668.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:21:08.239Z,1516713668.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:08.624Z,1516713668.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:08.638Z,1516713668.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:21:08.639Z,1516713668.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:09.020Z,1516713669.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:09.046Z,1516713669.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:21:09.052Z,1516713669.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:09.424Z,1516713669.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:09.438Z,1516713669.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:21:09.440Z,1516713669.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:09.833Z,1516713669.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:09.847Z,1516713669.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:21:09.848Z,1516713669.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:10.224Z,1516713670.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:10.244Z,1516713670.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:21:10.245Z,1516713670.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:10.625Z,1516713670.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:10.640Z,1516713670.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:21:10.641Z,1516713670.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:11.025Z,1516713671.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:11.049Z,1516713671.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:21:11.049Z,1516713671.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:11.419Z,1516713671.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:11.446Z,1516713671.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:21:11.451Z,1516713671.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:11.817Z,1516713671.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:11.844Z,1516713671.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:21:11.845Z,1516713671.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:12.217Z,1516713672.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:12.250Z,1516713672.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:21:12.251Z,1516713672.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:12.613Z,1516713672.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:12.651Z,1516713672.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:21:12.652Z,1516713672.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:13.016Z,1516713673.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:13.054Z,1516713673.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:21:13.055Z,1516713673.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:13.416Z,1516713673.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:13.444Z,1516713673.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:21:13.445Z,1516713673.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:13.816Z,1516713673.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:13.845Z,1516713673.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:21:13.846Z,1516713673.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:14.217Z,1516713674.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:14.252Z,1516713674.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:21:14.253Z,1516713674.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:14.617Z,1516713674.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:14.643Z,1516713674.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:21:14.644Z,1516713674.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:15.016Z,1516713675.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:15.043Z,1516713675.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:21:15.044Z,1516713675.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:15.416Z,1516713675.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:15.448Z,1516713675.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:21:15.449Z,1516713675.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:15.816Z,1516713675.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:15.841Z,1516713675.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:21:15.842Z,1516713675.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:16.216Z,1516713676.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:16.244Z,1516713676.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:21:16.245Z,1516713676.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:16.616Z,1516713676.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:16.649Z,1516713676.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:21:16.650Z,1516713676.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:17.016Z,1516713677.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:17.049Z,1516713677.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:21:17.050Z,1516713677.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:17.416Z,1516713677.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:17.442Z,1516713677.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:21:17.443Z,1516713677.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:17.816Z,1516713677.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:17.848Z,1516713677.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:21:17.849Z,1516713677.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:18.216Z,1516713678.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:18.249Z,1516713678.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:21:18.250Z,1516713678.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:18.616Z,1516713678.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:18.642Z,1516713678.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:21:18.643Z,1516713678.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:19.016Z,1516713679.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:19.041Z,1516713679.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:21:19.042Z,1516713679.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:19.416Z,1516713679.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:19.449Z,1516713679.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:19.813Z,1516713679.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:19.840Z,1516713679.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:20.216Z,1516713680.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:20.247Z,1516713680.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:20.616Z,1516713680.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:20.630Z,1516713680.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:21.013Z,1516713681.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:21.028Z,1516713681.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:21.420Z,1516713681.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:21.435Z,1516713681.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:21.828Z,1516713681.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:21.842Z,1516713681.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:21.887Z,1516713681.887 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T13:21:21.887Z,1516713681.887 [NAL9602] No Fault, FailCount= 5 2018-01-23T13:21:22.208Z,1516713682.208 [NAL9602](INFO): Powering up NAL9602 2018-01-23T13:21:22.226Z,1516713682.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:22.241Z,1516713682.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:25.318Z,1516713685.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:25.333Z,1516713685.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:25.425Z,1516713685.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:25.466Z,1516713685.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:25.796Z,1516713685.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:25.821Z,1516713685.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:26.208Z,1516713686.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:26.223Z,1516713686.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:26.596Z,1516713686.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:26.631Z,1516713686.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:26.996Z,1516713686.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:27.030Z,1516713687.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:27.396Z,1516713687.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:27.423Z,1516713687.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:27.796Z,1516713687.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:27.822Z,1516713687.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:28.196Z,1516713688.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:28.229Z,1516713688.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:28.596Z,1516713688.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:28.629Z,1516713688.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:28.993Z,1516713688.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:29.029Z,1516713689.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:29.400Z,1516713689.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:29.425Z,1516713689.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:29.800Z,1516713689.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:29.826Z,1516713689.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:30.200Z,1516713690.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:30.226Z,1516713690.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:30.596Z,1516713690.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:30.630Z,1516713690.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:30.996Z,1516713690.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:31.023Z,1516713691.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:31.395Z,1516713691.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:31.424Z,1516713691.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:31.796Z,1516713691.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:31.830Z,1516713691.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:32.195Z,1516713692.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:32.222Z,1516713692.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:32.594Z,1516713692.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:32.628Z,1516713692.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:33.014Z,1516713693.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:33.037Z,1516713693.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:33.384Z,1516713693.384 [NAL9602](INFO): NAL9602 initialized 2018-01-23T13:21:33.400Z,1516713693.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:33.436Z,1516713693.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:33.795Z,1516713693.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:33.833Z,1516713693.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:34.215Z,1516713694.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:34.230Z,1516713694.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:34.618Z,1516713694.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:34.633Z,1516713694.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:35.015Z,1516713695.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:35.030Z,1516713695.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:35.396Z,1516713695.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:35.429Z,1516713695.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:35.796Z,1516713695.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:35.833Z,1516713695.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:36.201Z,1516713696.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:36.232Z,1516713696.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:36.596Z,1516713696.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:36.633Z,1516713696.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:37.015Z,1516713697.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:37.049Z,1516713697.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:37.411Z,1516713697.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:37.449Z,1516713697.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:37.815Z,1516713697.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:37.839Z,1516713697.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:38.208Z,1516713698.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:38.243Z,1516713698.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:38.601Z,1516713698.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:38.616Z,1516713698.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:39.008Z,1516713699.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:39.025Z,1516713699.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:39.404Z,1516713699.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:39.425Z,1516713699.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:39.806Z,1516713699.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:39.821Z,1516713699.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:40.211Z,1516713700.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:40.226Z,1516713700.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:40.619Z,1516713700.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:40.634Z,1516713700.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:41.011Z,1516713701.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:41.026Z,1516713701.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:41.405Z,1516713701.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:41.420Z,1516713701.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:41.801Z,1516713701.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:41.823Z,1516713701.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:42.206Z,1516713702.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:42.221Z,1516713702.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:42.605Z,1516713702.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:42.619Z,1516713702.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:43.011Z,1516713703.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:43.027Z,1516713703.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:43.411Z,1516713703.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:43.426Z,1516713703.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:43.811Z,1516713703.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:43.826Z,1516713703.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:44.205Z,1516713704.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:44.220Z,1516713704.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:44.606Z,1516713704.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:44.622Z,1516713704.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:45.007Z,1516713705.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:45.021Z,1516713705.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:45.404Z,1516713705.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:45.425Z,1516713705.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:45.806Z,1516713705.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:45.821Z,1516713705.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:46.223Z,1516713706.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:46.238Z,1516713706.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:46.615Z,1516713706.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:46.630Z,1516713706.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:47.019Z,1516713707.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:47.041Z,1516713707.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:47.411Z,1516713707.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:47.426Z,1516713707.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:47.810Z,1516713707.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:47.825Z,1516713707.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:48.200Z,1516713708.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:48.227Z,1516713708.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:48.597Z,1516713708.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:48.631Z,1516713708.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:49.015Z,1516713709.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:49.038Z,1516713709.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:49.426Z,1516713709.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:49.441Z,1516713709.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:49.819Z,1516713709.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:49.833Z,1516713709.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:50.196Z,1516713710.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:50.233Z,1516713710.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:50.600Z,1516713710.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:50.630Z,1516713710.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:51.016Z,1516713711.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:51.033Z,1516713711.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:51.398Z,1516713711.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:51.435Z,1516713711.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:51.797Z,1516713711.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:51.829Z,1516713711.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:52.220Z,1516713712.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:52.240Z,1516713712.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:52.620Z,1516713712.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:52.635Z,1516713712.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:53.007Z,1516713713.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:53.045Z,1516713713.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:53.400Z,1516713713.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:53.437Z,1516713713.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:53.796Z,1516713713.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:53.840Z,1516713713.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:54.197Z,1516713714.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:54.212Z,1516713714.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:54.596Z,1516713714.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:54.617Z,1516713714.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:55.015Z,1516713715.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:55.043Z,1516713715.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:55.431Z,1516713715.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:55.446Z,1516713715.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:55.819Z,1516713715.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:55.845Z,1516713715.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:56.208Z,1516713716.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:56.248Z,1516713716.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:56.605Z,1516713716.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:56.620Z,1516713716.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:57.002Z,1516713717.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:57.017Z,1516713717.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:57.402Z,1516713717.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:57.417Z,1516713717.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:57.801Z,1516713717.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:57.824Z,1516713717.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:58.207Z,1516713718.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:58.223Z,1516713718.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:58.611Z,1516713718.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:58.626Z,1516713718.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:59.007Z,1516713719.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:59.022Z,1516713719.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:59.404Z,1516713719.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:59.419Z,1516713719.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:21:59.804Z,1516713719.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:21:59.824Z,1516713719.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:00.207Z,1516713720.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:00.222Z,1516713720.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:00.604Z,1516713720.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:00.619Z,1516713720.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:01.008Z,1516713721.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:01.035Z,1516713721.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:01.410Z,1516713721.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:01.425Z,1516713721.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:01.810Z,1516713721.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:01.833Z,1516713721.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:02.204Z,1516713722.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:02.224Z,1516713722.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:02.606Z,1516713722.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:02.621Z,1516713722.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:03.004Z,1516713723.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:03.025Z,1516713723.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:03.405Z,1516713723.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:03.420Z,1516713723.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:03.806Z,1516713723.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:03.822Z,1516713723.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:04.210Z,1516713724.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:04.233Z,1516713724.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:04.615Z,1516713724.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:04.630Z,1516713724.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:05.011Z,1516713725.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:05.033Z,1516713725.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:05.405Z,1516713725.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:05.420Z,1516713725.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:05.809Z,1516713725.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:05.824Z,1516713725.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:06.206Z,1516713726.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:06.221Z,1516713726.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:06.600Z,1516713726.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:06.627Z,1516713726.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:07.015Z,1516713727.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:07.029Z,1516713727.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:07.418Z,1516713727.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:07.433Z,1516713727.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:07.814Z,1516713727.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:07.837Z,1516713727.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:08.208Z,1516713728.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:08.223Z,1516713728.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:08.609Z,1516713728.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:08.629Z,1516713728.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:08.000Z,1516713729.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:09.022Z,1516713729.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:09.405Z,1516713729.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:09.424Z,1516713729.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:09.810Z,1516713729.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:09.829Z,1516713729.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:10.215Z,1516713730.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:10.237Z,1516713730.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:10.617Z,1516713730.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:10.632Z,1516713730.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:11.019Z,1516713731.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:11.041Z,1516713731.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:11.404Z,1516713731.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:11.434Z,1516713731.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:11.808Z,1516713731.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:11.823Z,1516713731.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:12.211Z,1516713732.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:12.226Z,1516713732.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:12.599Z,1516713732.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:12.631Z,1516713732.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:13.015Z,1516713733.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:13.030Z,1516713733.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:13.419Z,1516713733.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:13.434Z,1516713733.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:13.814Z,1516713733.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:13.829Z,1516713733.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:14.204Z,1516713734.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:14.219Z,1516713734.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:14.601Z,1516713734.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:14.624Z,1516713734.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:15.003Z,1516713735.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:15.022Z,1516713735.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:15.405Z,1516713735.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:15.424Z,1516713735.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:15.809Z,1516713735.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:15.825Z,1516713735.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:16.214Z,1516713736.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:16.230Z,1516713736.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:16.617Z,1516713736.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:16.636Z,1516713736.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:17.019Z,1516713737.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:17.041Z,1516713737.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:17.408Z,1516713737.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:17.429Z,1516713737.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:17.804Z,1516713737.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:17.819Z,1516713737.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:18.201Z,1516713738.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:18.232Z,1516713738.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:18.608Z,1516713738.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:18.626Z,1516713738.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:19.015Z,1516713739.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:19.030Z,1516713739.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:19.420Z,1516713739.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:19.434Z,1516713739.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:19.816Z,1516713739.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:19.830Z,1516713739.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:20.196Z,1516713740.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:20.231Z,1516713740.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:20.597Z,1516713740.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:20.633Z,1516713740.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:21.000Z,1516713741.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:21.026Z,1516713741.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:21.397Z,1516713741.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:21.423Z,1516713741.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:21.801Z,1516713741.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:21.827Z,1516713741.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:22.212Z,1516713742.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:22.233Z,1516713742.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:22.619Z,1516713742.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:22.640Z,1516713742.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:25.723Z,1516713745.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:25.740Z,1516713745.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:25.834Z,1516713745.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:25.880Z,1516713745.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:26.202Z,1516713746.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:26.229Z,1516713746.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:26.601Z,1516713746.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:26.637Z,1516713746.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:27.008Z,1516713747.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:27.035Z,1516713747.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:27.408Z,1516713747.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:27.447Z,1516713747.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:27.804Z,1516713747.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:27.836Z,1516713747.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:28.193Z,1516713748.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:28.213Z,1516713748.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:28.601Z,1516713748.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:28.645Z,1516713748.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:28.996Z,1516713748.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:29.017Z,1516713749.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:29.405Z,1516713749.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:29.421Z,1516713749.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:29.799Z,1516713749.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:29.815Z,1516713749.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:30.211Z,1516713750.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:30.235Z,1516713750.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:30.615Z,1516713750.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:30.650Z,1516713750.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:31.004Z,1516713751.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:31.019Z,1516713751.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:31.401Z,1516713751.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:31.416Z,1516713751.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:31.796Z,1516713751.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:31.826Z,1516713751.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:32.200Z,1516713752.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:32.222Z,1516713752.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:32.602Z,1516713752.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:32.618Z,1516713752.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:33.012Z,1516713753.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:33.027Z,1516713753.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:33.416Z,1516713753.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:33.431Z,1516713753.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:33.812Z,1516713753.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:33.832Z,1516713753.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:34.200Z,1516713754.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:34.221Z,1516713754.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:34.612Z,1516713754.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:34.628Z,1516713754.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:35.011Z,1516713755.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:35.026Z,1516713755.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:35.414Z,1516713755.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:35.429Z,1516713755.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:35.810Z,1516713755.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:35.833Z,1516713755.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:36.202Z,1516713756.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:36.217Z,1516713756.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:36.596Z,1516713756.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:36.619Z,1516713756.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:37.012Z,1516713757.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:37.032Z,1516713757.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:37.415Z,1516713757.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:37.429Z,1516713757.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:37.811Z,1516713757.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:37.826Z,1516713757.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:38.197Z,1516713758.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:38.220Z,1516713758.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:38.601Z,1516713758.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:38.616Z,1516713758.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:39.011Z,1516713759.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:39.026Z,1516713759.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:39.415Z,1516713759.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:39.430Z,1516713759.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:39.812Z,1516713759.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:39.832Z,1516713759.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:40.200Z,1516713760.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:40.220Z,1516713760.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:40.595Z,1516713760.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:40.628Z,1516713760.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:41.015Z,1516713761.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:41.030Z,1516713761.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:41.412Z,1516713761.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:41.439Z,1516713761.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:41.811Z,1516713761.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:41.826Z,1516713761.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:42.193Z,1516713762.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:42.232Z,1516713762.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:42.592Z,1516713762.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:42.618Z,1516713762.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:43.008Z,1516713763.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:43.029Z,1516713763.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:43.415Z,1516713763.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:43.436Z,1516713763.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:43.815Z,1516713763.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:43.830Z,1516713763.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:44.197Z,1516713764.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:44.229Z,1516713764.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:44.592Z,1516713764.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:44.630Z,1516713764.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:45.016Z,1516713765.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:45.030Z,1516713765.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:45.414Z,1516713765.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:45.429Z,1516713765.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:45.802Z,1516713765.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:45.829Z,1516713765.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:46.197Z,1516713766.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:46.223Z,1516713766.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:46.592Z,1516713766.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:46.629Z,1516713766.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:47.003Z,1516713767.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:47.030Z,1516713767.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:47.415Z,1516713767.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:47.431Z,1516713767.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:47.803Z,1516713767.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:47.837Z,1516713767.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:48.193Z,1516713768.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:48.228Z,1516713768.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:48.592Z,1516713768.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:48.629Z,1516713768.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:49.007Z,1516713769.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:49.033Z,1516713769.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:49.407Z,1516713769.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:49.442Z,1516713769.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:49.803Z,1516713769.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:49.834Z,1516713769.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:50.201Z,1516713770.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:50.216Z,1516713770.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:50.597Z,1516713770.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:50.612Z,1516713770.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:51.015Z,1516713771.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:51.039Z,1516713771.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:51.419Z,1516713771.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:51.449Z,1516713771.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:51.815Z,1516713771.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:51.841Z,1516713771.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:52.201Z,1516713772.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:52.216Z,1516713772.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:52.598Z,1516713772.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:52.617Z,1516713772.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:53.011Z,1516713773.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:53.026Z,1516713773.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:53.415Z,1516713773.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:53.430Z,1516713773.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:53.807Z,1516713773.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:53.821Z,1516713773.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:54.202Z,1516713774.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:54.217Z,1516713774.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:54.601Z,1516713774.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:54.621Z,1516713774.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:55.006Z,1516713775.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:55.029Z,1516713775.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:55.407Z,1516713775.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:55.422Z,1516713775.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:55.808Z,1516713775.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:55.822Z,1516713775.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:56.197Z,1516713776.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:56.219Z,1516713776.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:56.601Z,1516713776.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:56.616Z,1516713776.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:57.010Z,1516713777.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:57.025Z,1516713777.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:57.411Z,1516713777.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:57.426Z,1516713777.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:57.811Z,1516713777.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:57.825Z,1516713777.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:58.200Z,1516713778.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:58.220Z,1516713778.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:58.596Z,1516713778.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:58.618Z,1516713778.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:59.011Z,1516713779.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:59.026Z,1516713779.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:59.411Z,1516713779.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:59.426Z,1516713779.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:22:59.811Z,1516713779.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:22:59.825Z,1516713779.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:00.202Z,1516713780.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:00.217Z,1516713780.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:00.596Z,1516713780.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:00.621Z,1516713780.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:01.006Z,1516713781.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:01.033Z,1516713781.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:01.415Z,1516713781.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:01.430Z,1516713781.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:01.812Z,1516713781.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:01.826Z,1516713781.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:02.199Z,1516713782.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:02.221Z,1516713782.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:02.603Z,1516713782.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:02.629Z,1516713782.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:03.010Z,1516713783.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:03.034Z,1516713783.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:03.418Z,1516713783.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:03.433Z,1516713783.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:03.818Z,1516713783.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:03.832Z,1516713783.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:04.194Z,1516713784.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:04.233Z,1516713784.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:04.610Z,1516713784.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:04.625Z,1516713784.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:05.014Z,1516713785.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:05.029Z,1516713785.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:05.412Z,1516713785.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:05.439Z,1516713785.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:05.813Z,1516713785.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:05.828Z,1516713785.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:06.194Z,1516713786.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:06.229Z,1516713786.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:06.590Z,1516713786.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:06.618Z,1516713786.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:07.017Z,1516713787.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:07.032Z,1516713787.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:07.408Z,1516713787.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:07.428Z,1516713787.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:07.808Z,1516713787.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:07.824Z,1516713787.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:08.207Z,1516713788.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:08.225Z,1516713788.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:08.602Z,1516713788.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:08.618Z,1516713788.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:09.007Z,1516713789.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:09.023Z,1516713789.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:09.411Z,1516713789.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:09.427Z,1516713789.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:09.808Z,1516713789.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:09.822Z,1516713789.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:10.201Z,1516713790.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:10.279Z,1516713790.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:10.604Z,1516713790.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:10.618Z,1516713790.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:11.012Z,1516713791.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:11.026Z,1516713791.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:11.411Z,1516713791.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:11.426Z,1516713791.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:11.810Z,1516713791.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:11.826Z,1516713791.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:12.202Z,1516713792.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:12.221Z,1516713792.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:12.597Z,1516713792.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:12.624Z,1516713792.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:12.992Z,1516713792.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:13.025Z,1516713793.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:13.410Z,1516713793.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:13.434Z,1516713793.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:13.815Z,1516713793.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:13.830Z,1516713793.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:14.211Z,1516713794.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:14.226Z,1516713794.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:14.592Z,1516713794.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:14.628Z,1516713794.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:14.990Z,1516713794.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:15.025Z,1516713795.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:15.393Z,1516713795.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:15.424Z,1516713795.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:15.792Z,1516713795.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:15.820Z,1516713795.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:16.210Z,1516713796.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:16.225Z,1516713796.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:16.614Z,1516713796.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:16.629Z,1516713796.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:17.009Z,1516713797.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:17.035Z,1516713797.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:17.392Z,1516713797.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:17.421Z,1516713797.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:17.791Z,1516713797.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:17.827Z,1516713797.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:18.192Z,1516713798.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:18.228Z,1516713798.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:18.591Z,1516713798.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:18.618Z,1516713798.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:18.992Z,1516713798.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:19.025Z,1516713799.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:19.409Z,1516713799.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:19.430Z,1516713799.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:19.815Z,1516713799.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:19.830Z,1516713799.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:20.211Z,1516713800.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:20.226Z,1516713800.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:20.592Z,1516713800.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:20.628Z,1516713800.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:20.990Z,1516713800.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:21.025Z,1516713801.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:21.394Z,1516713801.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:21.421Z,1516713801.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:21.792Z,1516713801.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:21.828Z,1516713801.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:22.215Z,1516713802.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:22.230Z,1516713802.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:22.615Z,1516713802.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:22.630Z,1516713802.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:23.012Z,1516713803.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:23.029Z,1516713803.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:26.114Z,1516713806.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:26.129Z,1516713806.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:26.221Z,1516713806.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:26.263Z,1516713806.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:26.606Z,1516713806.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:26.621Z,1516713806.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:27.004Z,1516713807.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:27.019Z,1516713807.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:27.391Z,1516713807.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:27.421Z,1516713807.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:27.784Z,1516713807.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:27.815Z,1516713807.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:28.182Z,1516713808.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:28.217Z,1516713808.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:28.582Z,1516713808.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:28.617Z,1516713808.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:28.984Z,1516713808.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:29.021Z,1516713809.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:29.395Z,1516713809.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:29.430Z,1516713809.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:29.799Z,1516713809.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:29.823Z,1516713809.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:30.195Z,1516713810.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:30.226Z,1516713810.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:30.582Z,1516713810.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:30.596Z,1516713810.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:30.986Z,1516713810.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:31.001Z,1516713811.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:31.387Z,1516713811.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:31.402Z,1516713811.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:31.782Z,1516713811.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:31.797Z,1516713811.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:32.200Z,1516713812.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:32.235Z,1516713812.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:32.595Z,1516713812.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:32.610Z,1516713812.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:32.991Z,1516713812.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:33.009Z,1516713813.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:33.389Z,1516713813.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:33.404Z,1516713813.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:33.789Z,1516713813.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:33.804Z,1516713813.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:34.186Z,1516713814.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:34.200Z,1516713814.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:34.591Z,1516713814.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:34.606Z,1516713814.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:34.990Z,1516713814.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:35.005Z,1516713815.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:35.391Z,1516713815.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:35.406Z,1516713815.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:35.795Z,1516713815.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:35.810Z,1516713815.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:36.192Z,1516713816.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:36.206Z,1516713816.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:36.586Z,1516713816.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:36.600Z,1516713816.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:36.989Z,1516713816.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:37.004Z,1516713817.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:37.389Z,1516713817.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:37.409Z,1516713817.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:37.786Z,1516713817.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:37.801Z,1516713817.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:38.197Z,1516713818.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:38.213Z,1516713818.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:38.595Z,1516713818.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:38.610Z,1516713818.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:38.992Z,1516713818.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:39.006Z,1516713819.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:39.389Z,1516713819.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:39.404Z,1516713819.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:39.791Z,1516713819.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:39.813Z,1516713819.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:40.191Z,1516713820.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:40.206Z,1516713820.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:40.588Z,1516713820.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:40.603Z,1516713820.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:40.990Z,1516713820.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:41.005Z,1516713821.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:41.398Z,1516713821.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:41.439Z,1516713821.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:41.795Z,1516713821.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:41.810Z,1516713821.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:42.196Z,1516713822.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:42.211Z,1516713822.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:42.589Z,1516713822.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:42.604Z,1516713822.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:42.981Z,1516713822.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:43.009Z,1516713823.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:43.391Z,1516713823.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:43.407Z,1516713823.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:43.783Z,1516713823.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:43.816Z,1516713823.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:44.197Z,1516713824.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:44.213Z,1516713824.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:44.600Z,1516713824.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:44.621Z,1516713824.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:44.000Z,1516713825.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:45.015Z,1516713825.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:45.386Z,1516713825.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:45.401Z,1516713825.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:45.790Z,1516713825.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:45.806Z,1516713825.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:46.187Z,1516713826.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:46.203Z,1516713826.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:46.585Z,1516713826.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:46.609Z,1516713826.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:46.982Z,1516713826.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:47.009Z,1516713827.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:47.397Z,1516713827.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:47.413Z,1516713827.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:47.801Z,1516713827.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:47.817Z,1516713827.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:48.205Z,1516713828.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:48.220Z,1516713828.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:48.577Z,1516713828.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:48.606Z,1516713828.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:48.974Z,1516713828.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:49.002Z,1516713829.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:49.381Z,1516713829.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:49.409Z,1516713829.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:49.777Z,1516713829.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:49.811Z,1516713829.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:50.191Z,1516713830.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:50.215Z,1516713830.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:50.607Z,1516713830.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:50.629Z,1516713830.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:51.000Z,1516713831.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:51.016Z,1516713831.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:51.377Z,1516713831.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:51.408Z,1516713831.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:51.781Z,1516713831.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:51.812Z,1516713831.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:52.177Z,1516713832.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:52.191Z,1516713832.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:52.574Z,1516713832.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:52.589Z,1516713832.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:52.984Z,1516713832.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:53.021Z,1516713833.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:53.395Z,1516713833.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:53.429Z,1516713833.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:53.799Z,1516713833.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:53.823Z,1516713833.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:54.195Z,1516713834.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:54.226Z,1516713834.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:54.586Z,1516713834.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:54.600Z,1516713834.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:54.973Z,1516713834.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:55.009Z,1516713835.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:55.390Z,1516713835.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:55.405Z,1516713835.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:55.786Z,1516713835.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:55.800Z,1516713835.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:56.194Z,1516713836.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:56.209Z,1516713836.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:56.595Z,1516713836.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:56.610Z,1516713836.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:56.995Z,1516713836.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:57.016Z,1516713837.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:57.387Z,1516713837.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:57.402Z,1516713837.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:57.793Z,1516713837.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:57.808Z,1516713837.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:58.186Z,1516713838.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:58.208Z,1516713838.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:58.582Z,1516713838.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:58.598Z,1516713838.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:58.993Z,1516713838.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:59.008Z,1516713839.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:59.010Z,1516713839.010 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:59.010Z,1516713839.010 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202 2018-01-23T13:23:59.010Z,1516713839.010 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:23:59.022Z,1516713839.022 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:23:59.395Z,1516713839.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:59.410Z,1516713839.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:59.422Z,1516713839.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:23:59.423Z,1516713839.423 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202 2018-01-23T13:23:59.798Z,1516713839.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:23:59.813Z,1516713839.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:23:59.814Z,1516713839.814 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:23:59.815Z,1516713839.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:23:59.815Z,1516713839.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:24:00.203Z,1516713840.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:00.218Z,1516713840.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:00.218Z,1516713840.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202 2018-01-23T13:24:00.218Z,1516713840.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:24:00.220Z,1516713840.220 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:00.220Z,1516713840.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 202 2018-01-23T13:24:00.220Z,1516713840.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:24:00.248Z,1516713840.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:24:00.248Z,1516713840.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:24:00.576Z,1516713840.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:00.621Z,1516713840.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:24:00.621Z,1516713840.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202 2018-01-23T13:24:00.622Z,1516713840.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:24:00.622Z,1516713840.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 202 2018-01-23T13:24:00.977Z,1516713840.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:01.002Z,1516713841.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:24:01.003Z,1516713841.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:24:01.003Z,1516713841.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:24:01.003Z,1516713841.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:24:01.004Z,1516713841.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:24:01.004Z,1516713841.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:24:01.376Z,1516713841.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:01.409Z,1516713841.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:24:01.410Z,1516713841.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:01.776Z,1516713841.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:01.814Z,1516713841.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:24:01.815Z,1516713841.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:02.192Z,1516713842.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:02.213Z,1516713842.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:24:02.214Z,1516713842.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:02.607Z,1516713842.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:02.621Z,1516713842.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:24:02.622Z,1516713842.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:02.997Z,1516713842.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:03.016Z,1516713843.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:24:03.017Z,1516713843.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:03.374Z,1516713843.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:03.397Z,1516713843.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:24:03.398Z,1516713843.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:03.785Z,1516713843.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:03.810Z,1516713843.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:24:03.811Z,1516713843.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:04.178Z,1516713844.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:04.214Z,1516713844.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:24:04.215Z,1516713844.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:04.575Z,1516713844.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:04.590Z,1516713844.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:24:04.603Z,1516713844.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:04.985Z,1516713844.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:05.019Z,1516713845.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:24:05.020Z,1516713845.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:05.391Z,1516713845.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:05.418Z,1516713845.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:24:05.419Z,1516713845.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:05.788Z,1516713845.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:05.814Z,1516713845.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:24:05.819Z,1516713845.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:06.191Z,1516713846.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:06.222Z,1516713846.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:24:06.227Z,1516713846.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:06.583Z,1516713846.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:06.608Z,1516713846.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:24:06.609Z,1516713846.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:06.973Z,1516713846.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:07.004Z,1516713847.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:24:07.005Z,1516713847.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:07.391Z,1516713847.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:07.405Z,1516713847.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:24:07.406Z,1516713847.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:07.786Z,1516713847.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:07.800Z,1516713847.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:24:07.801Z,1516713847.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:08.194Z,1516713848.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:08.209Z,1516713848.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:24:08.210Z,1516713848.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:08.599Z,1516713848.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:08.614Z,1516713848.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:24:08.615Z,1516713848.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:08.995Z,1516713848.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:09.010Z,1516713849.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:24:09.011Z,1516713849.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:09.389Z,1516713849.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:09.403Z,1516713849.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:24:09.404Z,1516713849.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:09.792Z,1516713849.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:09.812Z,1516713849.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:24:09.813Z,1516713849.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:10.190Z,1516713850.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:10.204Z,1516713850.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:24:10.205Z,1516713850.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:10.593Z,1516713850.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:10.612Z,1516713850.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:24:10.613Z,1516713850.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:10.989Z,1516713850.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:11.008Z,1516713851.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:24:11.009Z,1516713851.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:11.395Z,1516713851.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:11.409Z,1516713851.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:24:11.410Z,1516713851.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:11.794Z,1516713851.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:11.809Z,1516713851.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:24:11.810Z,1516713851.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:12.200Z,1516713852.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:12.214Z,1516713852.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:24:12.215Z,1516713852.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:12.588Z,1516713852.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:12.602Z,1516713852.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:24:12.603Z,1516713852.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:12.984Z,1516713852.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:12.998Z,1516713852.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:24:12.999Z,1516713852.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:13.393Z,1516713853.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:13.407Z,1516713853.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:24:13.408Z,1516713853.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:13.793Z,1516713853.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:13.807Z,1516713853.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:24:13.808Z,1516713853.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:14.194Z,1516713854.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:14.209Z,1516713854.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:24:14.210Z,1516713854.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:14.599Z,1516713854.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:14.614Z,1516713854.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:24:14.615Z,1516713854.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:14.995Z,1516713854.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:15.010Z,1516713855.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:24:15.011Z,1516713855.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:15.393Z,1516713855.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:15.407Z,1516713855.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:24:15.408Z,1516713855.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:15.792Z,1516713855.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:15.807Z,1516713855.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:24:15.808Z,1516713855.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:16.190Z,1516713856.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:16.205Z,1516713856.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:24:16.206Z,1516713856.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:16.584Z,1516713856.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:16.599Z,1516713856.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:24:16.600Z,1516713856.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:16.997Z,1516713856.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:17.011Z,1516713857.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:24:17.012Z,1516713857.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:17.397Z,1516713857.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:17.411Z,1516713857.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:24:17.412Z,1516713857.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:17.795Z,1516713857.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:17.809Z,1516713857.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:24:17.810Z,1516713857.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:18.196Z,1516713858.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:18.210Z,1516713858.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:24:18.211Z,1516713858.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:18.595Z,1516713858.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:18.609Z,1516713858.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:24:18.610Z,1516713858.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:18.984Z,1516713858.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:19.006Z,1516713859.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:24:19.007Z,1516713859.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:19.395Z,1516713859.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:19.410Z,1516713859.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:24:19.411Z,1516713859.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:19.784Z,1516713859.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:19.806Z,1516713859.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:24:19.807Z,1516713859.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:20.204Z,1516713860.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:20.225Z,1516713860.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:20.604Z,1516713860.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:20.625Z,1516713860.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:21.004Z,1516713861.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:21.019Z,1516713861.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:21.378Z,1516713861.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:21.411Z,1516713861.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:21.792Z,1516713861.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:21.819Z,1516713861.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:22.183Z,1516713862.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:22.211Z,1516713862.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:22.585Z,1516713862.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:22.613Z,1516713862.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:22.985Z,1516713862.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:23.012Z,1516713863.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:23.404Z,1516713863.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:23.431Z,1516713863.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:26.504Z,1516713866.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:26.520Z,1516713866.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:26.639Z,1516713866.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:26.666Z,1516713866.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:26.974Z,1516713866.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:27.014Z,1516713867.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:27.382Z,1516713867.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:27.389Z,1516713867.389 [PNI_TCM](ERROR): CRC does not match. Expected:0x6479 got:0x6466 2018-01-23T13:24:27.423Z,1516713867.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:27.777Z,1516713867.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:27.801Z,1516713867.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:28.178Z,1516713868.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:28.219Z,1516713868.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:28.579Z,1516713868.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:28.598Z,1516713868.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:28.980Z,1516713868.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:28.997Z,1516713868.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:29.371Z,1516713869.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:29.391Z,1516713869.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:29.770Z,1516713869.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:29.801Z,1516713869.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:29.838Z,1516713869.838 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:24:30.179Z,1516713870.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:30.198Z,1516713870.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:30.579Z,1516713870.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:30.596Z,1516713870.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:30.981Z,1516713870.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:30.996Z,1516713870.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:31.369Z,1516713871.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:31.419Z,1516713871.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:31.768Z,1516713871.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:31.788Z,1516713871.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:32.180Z,1516713872.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:32.197Z,1516713872.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:32.580Z,1516713872.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:32.601Z,1516713872.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:32.982Z,1516713872.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:33.023Z,1516713873.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:33.371Z,1516713873.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:33.385Z,1516713873.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:33.768Z,1516713873.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:33.792Z,1516713873.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:34.181Z,1516713874.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:34.196Z,1516713874.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:34.583Z,1516713874.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:34.622Z,1516713874.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:34.978Z,1516713874.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:34.996Z,1516713874.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:35.370Z,1516713875.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:35.387Z,1516713875.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:35.770Z,1516713875.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:35.788Z,1516713875.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:36.179Z,1516713876.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:36.194Z,1516713876.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:36.583Z,1516713876.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:36.601Z,1516713876.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:36.980Z,1516713876.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:36.999Z,1516713876.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:37.374Z,1516713877.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:37.393Z,1516713877.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:37.767Z,1516713877.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:37.787Z,1516713877.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:38.178Z,1516713878.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:38.205Z,1516713878.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:38.578Z,1516713878.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:38.598Z,1516713878.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:38.980Z,1516713878.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:39.005Z,1516713879.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:39.375Z,1516713879.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:39.401Z,1516713879.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:39.768Z,1516713879.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:39.795Z,1516713879.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:40.186Z,1516713880.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:40.205Z,1516713880.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:40.586Z,1516713880.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:40.602Z,1516713880.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:40.976Z,1516713880.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:41.022Z,1516713881.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:41.374Z,1516713881.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:41.393Z,1516713881.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:41.761Z,1516713881.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:41.801Z,1516713881.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:42.180Z,1516713882.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:42.199Z,1516713882.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:42.583Z,1516713882.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:42.605Z,1516713882.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:42.977Z,1516713882.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:43.004Z,1516713883.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:43.362Z,1516713883.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:43.388Z,1516713883.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:43.761Z,1516713883.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:43.790Z,1516713883.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:44.178Z,1516713884.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:44.202Z,1516713884.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:44.578Z,1516713884.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:44.593Z,1516713884.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:44.976Z,1516713884.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:45.010Z,1516713885.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:45.362Z,1516713885.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:45.392Z,1516713885.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:45.761Z,1516713885.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:45.788Z,1516713885.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:46.176Z,1516713886.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:46.206Z,1516713886.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:46.584Z,1516713886.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:46.599Z,1516713886.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:46.980Z,1516713886.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:46.999Z,1516713886.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:47.366Z,1516713887.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:47.405Z,1516713887.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:47.761Z,1516713887.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:47.794Z,1516713887.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:48.180Z,1516713888.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:48.195Z,1516713888.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:48.581Z,1516713888.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:48.613Z,1516713888.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:48.981Z,1516713888.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:48.996Z,1516713888.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:49.362Z,1516713889.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:49.393Z,1516713889.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:49.761Z,1516713889.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:49.788Z,1516713889.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:50.171Z,1516713890.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:50.210Z,1516713890.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:50.571Z,1516713890.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:50.605Z,1516713890.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:50.988Z,1516713890.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:51.003Z,1516713891.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:51.362Z,1516713891.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:51.400Z,1516713891.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:51.761Z,1516713891.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:51.776Z,1516713891.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:52.188Z,1516713892.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:52.203Z,1516713892.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:52.575Z,1516713892.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:52.609Z,1516713892.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:52.971Z,1516713892.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:53.006Z,1516713893.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:53.361Z,1516713893.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:53.402Z,1516713893.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:53.761Z,1516713893.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:53.775Z,1516713893.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:54.179Z,1516713894.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:54.200Z,1516713894.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:54.595Z,1516713894.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:54.610Z,1516713894.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:54.979Z,1516713894.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:55.012Z,1516713895.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:55.366Z,1516713895.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:55.381Z,1516713895.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:55.773Z,1516713895.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:55.809Z,1516713895.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:56.183Z,1516713896.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:56.218Z,1516713896.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:56.572Z,1516713896.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:56.587Z,1516713896.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:56.972Z,1516713896.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:57.005Z,1516713897.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:57.370Z,1516713897.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:57.388Z,1516713897.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:57.768Z,1516713897.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:57.795Z,1516713897.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:58.180Z,1516713898.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:58.195Z,1516713898.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:58.579Z,1516713898.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:58.595Z,1516713898.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:58.980Z,1516713898.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:58.996Z,1516713898.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:59.375Z,1516713899.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:59.390Z,1516713899.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:24:59.771Z,1516713899.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:24:59.785Z,1516713899.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:00.181Z,1516713900.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:00.197Z,1516713900.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:00.579Z,1516713900.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:00.597Z,1516713900.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:00.981Z,1516713900.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:00.996Z,1516713900.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:01.365Z,1516713901.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:01.390Z,1516713901.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:01.762Z,1516713901.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:01.793Z,1516713901.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:02.174Z,1516713902.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:02.190Z,1516713902.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:02.576Z,1516713902.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:02.605Z,1516713902.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:02.985Z,1516713902.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:02.000Z,1516713903.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:03.380Z,1516713903.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:03.396Z,1516713903.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:03.762Z,1516713903.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:03.789Z,1516713903.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:04.162Z,1516713904.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:04.193Z,1516713904.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:04.563Z,1516713904.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:04.602Z,1516713904.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:04.961Z,1516713904.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:04.985Z,1516713904.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:05.372Z,1516713905.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:05.387Z,1516713905.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:05.776Z,1516713905.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:05.790Z,1516713905.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:06.175Z,1516713906.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:06.190Z,1516713906.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:06.573Z,1516713906.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:06.593Z,1516713906.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:06.973Z,1516713906.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:06.989Z,1516713906.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:07.372Z,1516713907.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:07.388Z,1516713907.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:07.766Z,1516713907.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:07.794Z,1516713907.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:08.170Z,1516713908.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:08.193Z,1516713908.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:08.576Z,1516713908.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:08.603Z,1516713908.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:08.982Z,1516713908.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:08.998Z,1516713908.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:09.380Z,1516713909.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:09.397Z,1516713909.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:09.764Z,1516713909.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:09.795Z,1516713909.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:10.173Z,1516713910.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:10.188Z,1516713910.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:10.562Z,1516713910.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:10.589Z,1516713910.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:10.961Z,1516713910.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:10.988Z,1516713910.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:11.376Z,1516713911.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:11.403Z,1516713911.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:11.784Z,1516713911.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:11.799Z,1516713911.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:12.180Z,1516713912.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:12.195Z,1516713912.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:12.561Z,1516713912.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:12.597Z,1516713912.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:12.965Z,1516713912.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:12.993Z,1516713912.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:13.365Z,1516713913.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:13.391Z,1516713913.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:13.762Z,1516713913.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:13.797Z,1516713913.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:14.161Z,1516713914.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:14.198Z,1516713914.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:14.579Z,1516713914.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:14.595Z,1516713914.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:14.982Z,1516713914.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:15.010Z,1516713915.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:15.370Z,1516713915.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:15.397Z,1516713915.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:15.761Z,1516713915.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:15.796Z,1516713915.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:16.165Z,1516713916.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:16.197Z,1516713916.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:16.565Z,1516713916.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:16.599Z,1516713916.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:16.961Z,1516713916.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:16.984Z,1516713916.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:17.372Z,1516713917.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:17.398Z,1516713917.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:17.775Z,1516713917.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:17.810Z,1516713917.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:18.188Z,1516713918.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:18.209Z,1516713918.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:18.561Z,1516713918.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:18.576Z,1516713918.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:18.961Z,1516713918.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:18.975Z,1516713918.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:19.366Z,1516713919.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:19.381Z,1516713919.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:19.766Z,1516713919.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:19.789Z,1516713919.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:20.170Z,1516713920.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:20.185Z,1516713920.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:20.571Z,1516713920.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:20.586Z,1516713920.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:20.979Z,1516713920.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:20.994Z,1516713920.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:21.382Z,1516713921.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:21.422Z,1516713921.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:21.770Z,1516713921.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:21.785Z,1516713921.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:22.164Z,1516713922.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:22.187Z,1516713922.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:22.190Z,1516713922.190 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:25:22.190Z,1516713922.190 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:25:22.190Z,1516713922.190 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:25:22.195Z,1516713922.195 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:25:22.576Z,1516713922.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:22.596Z,1516713922.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:22.599Z,1516713922.599 [Default:CheckIn:D] Stopped 2018-01-23T13:25:22.599Z,1516713922.599 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:25:22.968Z,1516713922.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:22.988Z,1516713922.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:22.991Z,1516713922.991 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 607.508984 min 2018-01-23T13:25:22.991Z,1516713922.991 [Default:CheckIn:E] Stopped 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn] Stopped 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn](INFO): Running loop #60 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn] Running Loop=60 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:25:22.992Z,1516713922.992 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:25:23.380Z,1516713923.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:23.395Z,1516713923.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:23.779Z,1516713923.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:23.797Z,1516713923.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:26.873Z,1516713926.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:26.889Z,1516713926.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:26.994Z,1516713926.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:27.029Z,1516713927.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:27.345Z,1516713927.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:27.381Z,1516713927.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:27.745Z,1516713927.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:27.785Z,1516713927.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:28.140Z,1516713928.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:28.177Z,1516713928.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:28.552Z,1516713928.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:28.587Z,1516713928.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:28.955Z,1516713928.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:28.988Z,1516713928.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:29.356Z,1516713929.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:29.386Z,1516713929.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:29.738Z,1516713929.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:29.761Z,1516713929.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:30.143Z,1516713930.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:30.158Z,1516713930.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:30.542Z,1516713930.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:30.557Z,1516713930.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:30.935Z,1516713930.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:30.969Z,1516713930.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:31.352Z,1516713931.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:31.367Z,1516713931.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:31.755Z,1516713931.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:31.770Z,1516713931.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:32.152Z,1516713932.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:32.167Z,1516713932.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:32.536Z,1516713932.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:32.570Z,1516713932.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:32.936Z,1516713932.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:32.973Z,1516713932.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:33.336Z,1516713933.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:33.360Z,1516713933.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:33.742Z,1516713933.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:33.758Z,1516713933.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:34.136Z,1516713934.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:34.162Z,1516713934.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:34.554Z,1516713934.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:34.588Z,1516713934.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:34.956Z,1516713934.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:34.972Z,1516713934.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:35.348Z,1516713935.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:35.375Z,1516713935.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:35.740Z,1516713935.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:35.773Z,1516713935.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:36.133Z,1516713936.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:36.167Z,1516713936.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:36.534Z,1516713936.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:36.571Z,1516713936.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:36.933Z,1516713936.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:36.969Z,1516713936.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:37.358Z,1516713937.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:37.373Z,1516713937.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:37.763Z,1516713937.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:37.778Z,1516713937.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:38.162Z,1516713938.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:38.177Z,1516713938.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:38.533Z,1516713938.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:38.569Z,1516713938.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:38.933Z,1516713938.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:38.970Z,1516713938.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:39.341Z,1516713939.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:39.373Z,1516713939.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:39.742Z,1516713939.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:39.758Z,1516713939.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:40.141Z,1516713940.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:40.157Z,1516713940.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:40.553Z,1516713940.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:40.588Z,1516713940.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:40.952Z,1516713940.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:40.987Z,1516713940.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:41.343Z,1516713941.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:41.360Z,1516713941.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:41.738Z,1516713941.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:41.765Z,1516713941.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:42.145Z,1516713942.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:42.161Z,1516713942.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:42.540Z,1516713942.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:42.560Z,1516713942.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:42.936Z,1516713942.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:42.966Z,1516713942.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:43.346Z,1516713943.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:43.362Z,1516713943.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:43.752Z,1516713943.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:43.767Z,1516713943.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:44.150Z,1516713944.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:44.165Z,1516713944.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:44.541Z,1516713944.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:44.556Z,1516713944.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:44.936Z,1516713944.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:44.957Z,1516713944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:45.340Z,1516713945.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:45.359Z,1516713945.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:45.742Z,1516713945.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:45.757Z,1516713945.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:46.137Z,1516713946.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:46.159Z,1516713946.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:46.549Z,1516713946.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:46.569Z,1516713946.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:46.951Z,1516713946.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:46.965Z,1516713946.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:47.351Z,1516713947.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:47.366Z,1516713947.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:47.740Z,1516713947.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:47.756Z,1516713947.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:48.141Z,1516713948.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:48.156Z,1516713948.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:48.545Z,1516713948.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:48.561Z,1516713948.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:48.940Z,1516713948.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:48.955Z,1516713948.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:49.351Z,1516713949.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:49.366Z,1516713949.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:49.750Z,1516713949.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:49.773Z,1516713949.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:50.150Z,1516713950.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:50.165Z,1516713950.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:50.541Z,1516713950.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:50.556Z,1516713950.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:50.936Z,1516713950.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:50.957Z,1516713950.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:51.336Z,1516713951.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:51.367Z,1516713951.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:51.742Z,1516713951.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:51.757Z,1516713951.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:52.136Z,1516713952.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:52.160Z,1516713952.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:52.551Z,1516713952.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:52.566Z,1516713952.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:52.955Z,1516713952.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:52.969Z,1516713952.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:53.351Z,1516713953.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:53.366Z,1516713953.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:53.739Z,1516713953.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:53.755Z,1516713953.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:54.142Z,1516713954.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:54.158Z,1516713954.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:54.540Z,1516713954.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:54.561Z,1516713954.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:54.935Z,1516713954.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:54.968Z,1516713954.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:55.353Z,1516713955.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:55.372Z,1516713955.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:55.754Z,1516713955.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:55.769Z,1516713955.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:56.151Z,1516713956.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:56.173Z,1516713956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:56.541Z,1516713956.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:56.565Z,1516713956.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:56.930Z,1516713956.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:56.957Z,1516713956.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:57.336Z,1516713957.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:57.369Z,1516713957.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:57.742Z,1516713957.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:57.764Z,1516713957.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:58.144Z,1516713958.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:58.165Z,1516713958.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:58.551Z,1516713958.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:58.566Z,1516713958.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:58.956Z,1516713958.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:58.970Z,1516713958.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:59.351Z,1516713959.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:59.366Z,1516713959.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:25:59.736Z,1516713959.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:25:59.760Z,1516713959.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:00.140Z,1516713960.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:00.161Z,1516713960.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:00.540Z,1516713960.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:00.560Z,1516713960.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:00.936Z,1516713960.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:00.963Z,1516713960.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:01.348Z,1516713961.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:01.372Z,1516713961.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:01.755Z,1516713961.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:01.770Z,1516713961.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:02.148Z,1516713962.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:02.170Z,1516713962.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:02.533Z,1516713962.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:02.569Z,1516713962.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:02.930Z,1516713962.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:02.958Z,1516713962.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:03.332Z,1516713963.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:03.369Z,1516713963.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:03.737Z,1516713963.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:03.776Z,1516713963.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:04.134Z,1516713964.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:04.150Z,1516713964.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:04.543Z,1516713964.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:04.581Z,1516713964.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:04.956Z,1516713964.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:04.982Z,1516713964.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:05.352Z,1516713965.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:05.384Z,1516713965.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:05.744Z,1516713965.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:05.781Z,1516713965.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:06.140Z,1516713966.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:06.156Z,1516713966.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:06.538Z,1516713966.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:06.561Z,1516713966.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:06.952Z,1516713966.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:06.994Z,1516713966.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:07.362Z,1516713967.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:07.401Z,1516713967.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:07.750Z,1516713967.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:07.765Z,1516713967.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:08.153Z,1516713968.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:08.173Z,1516713968.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:08.561Z,1516713968.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:08.612Z,1516713968.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:08.948Z,1516713968.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:08.975Z,1516713968.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:09.338Z,1516713969.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:09.415Z,1516713969.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:09.758Z,1516713969.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:09.790Z,1516713969.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:10.141Z,1516713970.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:10.173Z,1516713970.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:10.590Z,1516713970.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:10.605Z,1516713970.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:10.956Z,1516713970.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:10.989Z,1516713970.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:11.348Z,1516713971.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:11.383Z,1516713971.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:11.759Z,1516713971.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:11.796Z,1516713971.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:12.156Z,1516713972.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:12.198Z,1516713972.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:12.544Z,1516713972.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:12.565Z,1516713972.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:12.949Z,1516713972.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:12.973Z,1516713972.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:13.351Z,1516713973.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:13.390Z,1516713973.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:13.762Z,1516713973.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:13.781Z,1516713973.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:14.161Z,1516713974.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:14.221Z,1516713974.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:14.533Z,1516713974.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:14.581Z,1516713974.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:14.943Z,1516713974.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:14.993Z,1516713974.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:15.342Z,1516713975.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:15.412Z,1516713975.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:15.748Z,1516713975.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:15.795Z,1516713975.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:16.138Z,1516713976.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:16.185Z,1516713976.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:16.558Z,1516713976.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:16.585Z,1516713976.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:16.953Z,1516713976.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:16.992Z,1516713976.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:17.354Z,1516713977.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:17.396Z,1516713977.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:17.751Z,1516713977.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:17.776Z,1516713977.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:18.160Z,1516713978.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:18.182Z,1516713978.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:18.536Z,1516713978.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:18.568Z,1516713978.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:18.939Z,1516713978.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:18.980Z,1516713978.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:19.350Z,1516713979.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:19.392Z,1516713979.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:19.762Z,1516713979.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:19.801Z,1516713979.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:20.158Z,1516713980.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:20.197Z,1516713980.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:20.542Z,1516713980.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:20.597Z,1516713980.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:20.942Z,1516713980.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:20.989Z,1516713980.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:21.359Z,1516713981.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:21.395Z,1516713981.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:21.750Z,1516713981.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:21.804Z,1516713981.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:22.149Z,1516713982.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:22.169Z,1516713982.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:22.563Z,1516713982.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:22.608Z,1516713982.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:22.943Z,1516713982.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:23.003Z,1516713983.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:23.355Z,1516713983.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:23.397Z,1516713983.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:23.763Z,1516713983.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:23.789Z,1516713983.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:24.155Z,1516713984.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:24.211Z,1516713984.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:28.531Z,1516713988.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:28.563Z,1516713988.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:28.657Z,1516713988.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:28.692Z,1516713988.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:29.020Z,1516713989.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:29.036Z,1516713989.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:29.424Z,1516713989.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:29.438Z,1516713989.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:29.820Z,1516713989.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:29.836Z,1516713989.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:30.217Z,1516713990.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:30.233Z,1516713990.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:30.615Z,1516713990.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:30.629Z,1516713990.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:31.008Z,1516713991.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:31.028Z,1516713991.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:31.419Z,1516713991.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:31.434Z,1516713991.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:31.819Z,1516713991.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:31.834Z,1516713991.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:32.218Z,1516713992.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:32.233Z,1516713992.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:32.612Z,1516713992.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:32.630Z,1516713992.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:33.014Z,1516713993.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:33.028Z,1516713993.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:33.412Z,1516713993.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:33.427Z,1516713993.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:33.809Z,1516713993.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:33.831Z,1516713993.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:34.214Z,1516713994.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:34.228Z,1516713994.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:34.618Z,1516713994.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:34.633Z,1516713994.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:35.019Z,1516713995.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:35.034Z,1516713995.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:35.418Z,1516713995.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:35.433Z,1516713995.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:35.812Z,1516713995.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:35.827Z,1516713995.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:36.208Z,1516713996.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:36.237Z,1516713996.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:36.614Z,1516713996.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:36.629Z,1516713996.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:37.008Z,1516713997.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:37.028Z,1516713997.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:37.431Z,1516713997.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:37.446Z,1516713997.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:37.823Z,1516713997.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:37.838Z,1516713997.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:38.222Z,1516713998.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:38.245Z,1516713998.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:38.612Z,1516713998.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:38.627Z,1516713998.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:39.012Z,1516713999.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:39.038Z,1516713999.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:39.410Z,1516713999.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:39.433Z,1516713999.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:39.818Z,1516713999.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:39.833Z,1516713999.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:40.213Z,1516714000.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:40.228Z,1516714000.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:40.623Z,1516714000.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:40.638Z,1516714000.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:41.023Z,1516714001.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:41.038Z,1516714001.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:41.422Z,1516714001.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:41.437Z,1516714001.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:41.810Z,1516714001.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:41.833Z,1516714001.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:42.210Z,1516714002.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:42.238Z,1516714002.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:42.614Z,1516714002.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:42.629Z,1516714002.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:43.008Z,1516714003.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:43.028Z,1516714003.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:43.423Z,1516714003.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:43.438Z,1516714003.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:43.822Z,1516714003.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:43.844Z,1516714003.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:44.222Z,1516714004.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:44.237Z,1516714004.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:44.610Z,1516714004.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:44.633Z,1516714004.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:45.017Z,1516714005.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:45.033Z,1516714005.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:45.402Z,1516714005.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:45.434Z,1516714005.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:45.817Z,1516714005.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:45.832Z,1516714005.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:46.205Z,1516714006.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:46.245Z,1516714006.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:46.624Z,1516714006.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:46.639Z,1516714006.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:47.024Z,1516714007.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:47.051Z,1516714007.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:47.424Z,1516714007.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:47.439Z,1516714007.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:47.805Z,1516714007.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:47.837Z,1516714007.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:48.209Z,1516714008.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:48.245Z,1516714008.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:48.610Z,1516714008.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:48.641Z,1516714008.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:49.005Z,1516714009.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:49.021Z,1516714009.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:49.438Z,1516714009.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:49.453Z,1516714009.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:49.839Z,1516714009.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:49.854Z,1516714009.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:50.224Z,1516714010.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:50.266Z,1516714010.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:50.610Z,1516714010.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:50.629Z,1516714010.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:51.013Z,1516714011.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:51.033Z,1516714011.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:51.411Z,1516714011.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:51.426Z,1516714011.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:51.810Z,1516714011.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:51.837Z,1516714011.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:52.214Z,1516714012.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:52.230Z,1516714012.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:52.618Z,1516714012.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:52.637Z,1516714012.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:53.026Z,1516714013.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:53.041Z,1516714013.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:53.424Z,1516714013.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:53.439Z,1516714013.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:53.808Z,1516714013.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:53.837Z,1516714013.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:54.204Z,1516714014.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:54.240Z,1516714014.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:54.619Z,1516714014.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:54.634Z,1516714014.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:55.004Z,1516714015.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:55.037Z,1516714015.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:55.424Z,1516714015.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:55.439Z,1516714015.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:55.831Z,1516714015.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:55.846Z,1516714015.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:56.224Z,1516714016.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:56.239Z,1516714016.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:56.605Z,1516714016.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:56.642Z,1516714016.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:57.005Z,1516714017.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:57.045Z,1516714017.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:57.409Z,1516714017.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:57.436Z,1516714017.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:57.805Z,1516714017.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:57.846Z,1516714017.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:58.205Z,1516714018.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:58.234Z,1516714018.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:58.620Z,1516714018.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:58.652Z,1516714018.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:59.036Z,1516714019.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:59.051Z,1516714019.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:59.420Z,1516714019.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:59.453Z,1516714019.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:59.809Z,1516714019.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:26:59.836Z,1516714019.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:59.838Z,1516714019.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:26:59.839Z,1516714019.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203 2018-01-23T13:26:59.839Z,1516714019.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:26:59.851Z,1516714019.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:27:00.205Z,1516714020.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:00.243Z,1516714020.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:00.256Z,1516714020.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:27:00.256Z,1516714020.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203 2018-01-23T13:27:00.605Z,1516714020.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:00.641Z,1516714020.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:00.642Z,1516714020.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:27:00.647Z,1516714020.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:27:00.647Z,1516714020.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:27:01.004Z,1516714021.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:01.041Z,1516714021.041 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:01.041Z,1516714021.041 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203 2018-01-23T13:27:01.041Z,1516714021.041 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:27:01.043Z,1516714021.043 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:01.043Z,1516714021.043 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 203 2018-01-23T13:27:01.043Z,1516714021.043 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:27:01.068Z,1516714021.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:27:01.068Z,1516714021.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:27:01.420Z,1516714021.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:01.459Z,1516714021.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:27:01.459Z,1516714021.459 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203 2018-01-23T13:27:01.460Z,1516714021.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:27:01.460Z,1516714021.460 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 203 2018-01-23T13:27:01.820Z,1516714021.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:01.856Z,1516714021.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:27:01.857Z,1516714021.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:27:01.857Z,1516714021.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:27:01.857Z,1516714021.857 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:27:01.858Z,1516714021.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:27:01.858Z,1516714021.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:27:02.224Z,1516714022.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:02.248Z,1516714022.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:27:02.249Z,1516714022.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:02.616Z,1516714022.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:02.653Z,1516714022.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:27:02.654Z,1516714022.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:03.012Z,1516714023.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:03.026Z,1516714023.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:27:03.027Z,1516714023.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:03.409Z,1516714023.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:03.432Z,1516714023.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:27:03.433Z,1516714023.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:03.812Z,1516714023.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:03.830Z,1516714023.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:27:03.831Z,1516714023.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:04.213Z,1516714024.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:04.232Z,1516714024.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:27:04.233Z,1516714024.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:04.627Z,1516714024.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:04.666Z,1516714024.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:27:04.671Z,1516714024.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:05.019Z,1516714025.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:05.034Z,1516714025.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:27:05.035Z,1516714025.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:05.419Z,1516714025.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:05.433Z,1516714025.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:27:05.434Z,1516714025.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:05.809Z,1516714025.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:05.836Z,1516714025.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:27:05.837Z,1516714025.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:06.217Z,1516714026.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:06.232Z,1516714026.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:27:06.233Z,1516714026.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:06.615Z,1516714026.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:06.629Z,1516714026.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:27:06.630Z,1516714026.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:07.010Z,1516714027.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:07.031Z,1516714027.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:27:07.032Z,1516714027.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:07.424Z,1516714027.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:07.439Z,1516714027.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:27:07.440Z,1516714027.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:07.823Z,1516714027.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:07.837Z,1516714027.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:27:07.838Z,1516714027.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:08.223Z,1516714028.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:08.237Z,1516714028.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:27:08.238Z,1516714028.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:08.612Z,1516714028.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:08.631Z,1516714028.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:27:08.632Z,1516714028.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:09.013Z,1516714029.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:09.033Z,1516714029.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:27:09.034Z,1516714029.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:09.422Z,1516714029.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:09.444Z,1516714029.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:27:09.445Z,1516714029.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:09.826Z,1516714029.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:09.841Z,1516714029.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:27:09.842Z,1516714029.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:10.224Z,1516714030.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:10.238Z,1516714030.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:27:10.240Z,1516714030.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:10.609Z,1516714030.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:10.631Z,1516714030.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:27:10.632Z,1516714030.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:11.011Z,1516714031.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:11.043Z,1516714031.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:27:11.044Z,1516714031.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:11.427Z,1516714031.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:11.442Z,1516714031.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:27:11.443Z,1516714031.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:11.827Z,1516714031.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:11.841Z,1516714031.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:27:11.842Z,1516714031.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:12.220Z,1516714032.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:12.246Z,1516714032.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:27:12.251Z,1516714032.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:12.609Z,1516714032.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:12.636Z,1516714032.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:27:12.637Z,1516714032.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:13.004Z,1516714033.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:13.029Z,1516714033.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:27:13.030Z,1516714033.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:13.420Z,1516714033.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:13.449Z,1516714033.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:27:13.450Z,1516714033.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:13.827Z,1516714033.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:13.841Z,1516714033.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:27:13.842Z,1516714033.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:14.223Z,1516714034.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:14.238Z,1516714034.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:27:14.239Z,1516714034.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:14.605Z,1516714034.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:14.636Z,1516714034.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:27:14.637Z,1516714034.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:15.004Z,1516714035.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:15.033Z,1516714035.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:27:15.033Z,1516714035.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:15.424Z,1516714035.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:15.438Z,1516714035.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:27:15.439Z,1516714035.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:15.824Z,1516714035.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:15.847Z,1516714035.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:27:15.848Z,1516714035.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:16.215Z,1516714036.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:16.242Z,1516714036.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:27:16.243Z,1516714036.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:16.605Z,1516714036.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:16.632Z,1516714036.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:27:16.633Z,1516714036.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:17.012Z,1516714037.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:17.044Z,1516714037.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:27:17.045Z,1516714037.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:17.414Z,1516714037.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:17.446Z,1516714037.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:27:17.447Z,1516714037.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:17.819Z,1516714037.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:17.845Z,1516714037.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:27:17.846Z,1516714037.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:18.216Z,1516714038.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:18.241Z,1516714038.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:27:18.242Z,1516714038.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:18.605Z,1516714038.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:18.648Z,1516714038.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:27:18.649Z,1516714038.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:19.008Z,1516714039.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:19.044Z,1516714039.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:27:19.045Z,1516714039.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:19.415Z,1516714039.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:19.441Z,1516714039.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:27:19.442Z,1516714039.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:19.819Z,1516714039.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:19.854Z,1516714039.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:27:19.855Z,1516714039.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:20.215Z,1516714040.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:20.241Z,1516714040.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:27:20.242Z,1516714040.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:20.605Z,1516714040.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:20.620Z,1516714040.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:27:20.621Z,1516714040.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:21.004Z,1516714041.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:21.019Z,1516714041.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:27:21.020Z,1516714041.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:21.436Z,1516714041.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:21.451Z,1516714041.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:21.838Z,1516714041.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:21.853Z,1516714041.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:22.222Z,1516714042.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:22.254Z,1516714042.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:22.610Z,1516714042.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:22.625Z,1516714042.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:23.009Z,1516714043.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:23.029Z,1516714043.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:23.418Z,1516714043.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:23.433Z,1516714043.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:23.823Z,1516714043.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:23.838Z,1516714043.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:24.216Z,1516714044.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:24.231Z,1516714044.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:27.306Z,1516714047.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:27.321Z,1516714047.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:27.430Z,1516714047.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:27.469Z,1516714047.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:27.787Z,1516714047.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:27.811Z,1516714047.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:28.187Z,1516714048.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:28.211Z,1516714048.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:28.583Z,1516714048.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:28.614Z,1516714048.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:28.971Z,1516714048.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:28.993Z,1516714048.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:29.371Z,1516714049.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:29.385Z,1516714049.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:29.772Z,1516714049.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:29.787Z,1516714049.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:30.171Z,1516714050.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:30.193Z,1516714050.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:30.579Z,1516714050.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:30.594Z,1516714050.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:30.979Z,1516714050.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:30.994Z,1516714050.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:31.390Z,1516714051.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:31.417Z,1516714051.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:31.776Z,1516714051.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:31.790Z,1516714051.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:32.172Z,1516714052.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:32.199Z,1516714052.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:32.572Z,1516714052.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:32.592Z,1516714052.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:32.980Z,1516714052.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:32.995Z,1516714052.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:33.369Z,1516714053.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:33.397Z,1516714053.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:33.783Z,1516714053.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:33.805Z,1516714053.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:34.189Z,1516714054.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:34.203Z,1516714054.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:34.583Z,1516714054.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:34.606Z,1516714054.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:34.966Z,1516714054.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:34.993Z,1516714054.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:35.366Z,1516714055.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:35.401Z,1516714055.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:35.775Z,1516714055.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:35.795Z,1516714055.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:36.172Z,1516714056.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:36.199Z,1516714056.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:36.587Z,1516714056.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:36.610Z,1516714056.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:36.982Z,1516714056.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:37.011Z,1516714057.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:37.388Z,1516714057.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:37.403Z,1516714057.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:37.765Z,1516714057.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:37.805Z,1516714057.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:38.165Z,1516714058.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:38.197Z,1516714058.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:38.565Z,1516714058.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:38.580Z,1516714058.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:38.966Z,1516714058.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:38.980Z,1516714058.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:39.372Z,1516714059.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:39.409Z,1516714059.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:39.783Z,1516714059.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:39.819Z,1516714059.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:40.179Z,1516714060.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:40.194Z,1516714060.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:40.580Z,1516714060.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:40.594Z,1516714060.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:40.973Z,1516714060.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:40.989Z,1516714060.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:41.374Z,1516714061.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:41.389Z,1516714061.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:41.773Z,1516714061.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:41.796Z,1516714061.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:42.172Z,1516714062.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:42.192Z,1516714062.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:42.580Z,1516714062.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:42.595Z,1516714062.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:42.978Z,1516714062.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:42.993Z,1516714062.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:43.380Z,1516714063.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:43.395Z,1516714063.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:43.774Z,1516714063.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:43.790Z,1516714063.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:44.172Z,1516714064.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:44.192Z,1516714064.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:44.571Z,1516714064.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:44.604Z,1516714064.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:44.977Z,1516714064.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:44.992Z,1516714064.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:45.372Z,1516714065.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:45.391Z,1516714065.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:45.782Z,1516714065.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:45.797Z,1516714065.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:46.183Z,1516714066.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:46.205Z,1516714066.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:46.580Z,1516714066.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:46.603Z,1516714066.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:46.972Z,1516714066.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:46.992Z,1516714066.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:47.374Z,1516714067.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:47.389Z,1516714067.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:47.772Z,1516714067.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:47.792Z,1516714067.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:48.169Z,1516714068.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:48.191Z,1516714068.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:48.587Z,1516714068.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:48.608Z,1516714068.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:48.983Z,1516714068.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:48.998Z,1516714068.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:49.387Z,1516714069.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:49.401Z,1516714069.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:49.774Z,1516714069.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:49.796Z,1516714069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:50.172Z,1516714070.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:50.199Z,1516714070.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:50.565Z,1516714070.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:50.601Z,1516714070.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:50.966Z,1516714070.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:50.999Z,1516714070.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:51.365Z,1516714071.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:51.396Z,1516714071.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:51.788Z,1516714071.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:51.803Z,1516714071.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:52.189Z,1516714072.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:52.204Z,1516714072.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:52.576Z,1516714072.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:52.613Z,1516714072.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:52.965Z,1516714072.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:52.981Z,1516714072.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:53.365Z,1516714073.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:53.380Z,1516714073.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:53.777Z,1516714073.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:53.809Z,1516714073.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:54.177Z,1516714074.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:54.213Z,1516714074.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:54.583Z,1516714074.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:54.598Z,1516714074.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:54.976Z,1516714074.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:54.990Z,1516714074.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:55.384Z,1516714075.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:55.398Z,1516714075.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:55.773Z,1516714075.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:55.788Z,1516714075.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:56.172Z,1516714076.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:56.193Z,1516714076.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:56.572Z,1516714076.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:56.589Z,1516714076.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:56.977Z,1516714076.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:56.992Z,1516714076.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:57.369Z,1516714077.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:57.396Z,1516714077.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:57.782Z,1516714077.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:57.797Z,1516714077.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:58.183Z,1516714078.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:58.197Z,1516714078.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:58.579Z,1516714078.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:58.602Z,1516714078.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:58.972Z,1516714078.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:58.999Z,1516714078.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:59.365Z,1516714079.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:59.393Z,1516714079.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:27:59.766Z,1516714079.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:27:59.801Z,1516714079.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:00.165Z,1516714080.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:00.197Z,1516714080.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:00.586Z,1516714080.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:00.609Z,1516714080.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:00.987Z,1516714080.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:01.002Z,1516714081.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:01.389Z,1516714081.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:01.413Z,1516714081.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:01.765Z,1516714081.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:01.793Z,1516714081.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:02.165Z,1516714082.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:02.192Z,1516714082.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:02.572Z,1516714082.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:02.601Z,1516714082.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:02.969Z,1516714082.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:03.014Z,1516714083.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:03.365Z,1516714083.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:03.391Z,1516714083.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:03.784Z,1516714083.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:03.809Z,1516714083.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:04.187Z,1516714084.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:04.202Z,1516714084.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:04.586Z,1516714084.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:04.609Z,1516714084.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:04.965Z,1516714084.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:04.992Z,1516714084.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:05.365Z,1516714085.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:05.402Z,1516714085.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:05.766Z,1516714085.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:05.797Z,1516714085.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:06.171Z,1516714086.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:06.205Z,1516714086.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:06.579Z,1516714086.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:06.614Z,1516714086.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:06.979Z,1516714086.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:07.006Z,1516714087.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:07.383Z,1516714087.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:07.414Z,1516714087.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:07.776Z,1516714087.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:07.791Z,1516714087.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:08.172Z,1516714088.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:08.191Z,1516714088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:08.573Z,1516714088.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:08.588Z,1516714088.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:08.974Z,1516714088.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:08.989Z,1516714088.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:09.380Z,1516714089.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:09.395Z,1516714089.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:09.779Z,1516714089.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:09.795Z,1516714089.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:10.178Z,1516714090.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:10.193Z,1516714090.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:10.580Z,1516714090.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:10.595Z,1516714090.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:10.975Z,1516714090.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:10.990Z,1516714090.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:11.374Z,1516714091.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:11.389Z,1516714091.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:11.770Z,1516714091.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:11.797Z,1516714091.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:12.175Z,1516714092.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:12.189Z,1516714092.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:12.591Z,1516714092.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:12.624Z,1516714092.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:12.980Z,1516714092.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:12.995Z,1516714092.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:13.380Z,1516714093.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:13.395Z,1516714093.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:13.776Z,1516714093.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:13.790Z,1516714093.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:14.176Z,1516714094.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:14.200Z,1516714094.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:14.582Z,1516714094.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:14.598Z,1516714094.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:14.970Z,1516714094.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:15.004Z,1516714095.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:15.365Z,1516714095.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:15.394Z,1516714095.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:15.789Z,1516714095.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:15.813Z,1516714095.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:16.201Z,1516714096.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:16.216Z,1516714096.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:16.575Z,1516714096.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:16.617Z,1516714096.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:16.965Z,1516714096.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:17.005Z,1516714097.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:17.368Z,1516714097.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:17.382Z,1516714097.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:17.777Z,1516714097.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:17.808Z,1516714097.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:18.173Z,1516714098.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:18.193Z,1516714098.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:18.583Z,1516714098.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:18.598Z,1516714098.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:18.977Z,1516714098.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:18.992Z,1516714098.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:19.387Z,1516714099.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:19.402Z,1516714099.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:19.778Z,1516714099.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:19.793Z,1516714099.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:20.173Z,1516714100.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:20.192Z,1516714100.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:20.572Z,1516714100.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:20.599Z,1516714100.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:20.983Z,1516714100.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:20.998Z,1516714100.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:21.376Z,1516714101.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:21.391Z,1516714101.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:21.783Z,1516714101.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:21.805Z,1516714101.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:22.188Z,1516714102.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:22.203Z,1516714102.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:22.583Z,1516714102.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:22.602Z,1516714102.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:22.981Z,1516714102.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:23.001Z,1516714103.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:23.374Z,1516714103.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:23.389Z,1516714103.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:23.777Z,1516714103.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:23.793Z,1516714103.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:24.170Z,1516714104.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:24.204Z,1516714104.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:24.588Z,1516714104.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:24.603Z,1516714104.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:27.683Z,1516714107.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:27.699Z,1516714107.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:27.812Z,1516714107.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:27.837Z,1516714107.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:28.153Z,1516714108.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:28.184Z,1516714108.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:28.549Z,1516714108.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:28.590Z,1516714108.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:28.942Z,1516714108.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:28.960Z,1516714108.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:29.346Z,1516714109.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:29.369Z,1516714109.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:29.764Z,1516714109.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:29.796Z,1516714109.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:30.156Z,1516714110.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:30.193Z,1516714110.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:30.552Z,1516714110.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:30.571Z,1516714110.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:30.951Z,1516714110.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:30.968Z,1516714110.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:31.352Z,1516714111.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:31.373Z,1516714111.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:31.751Z,1516714111.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:31.793Z,1516714111.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:32.150Z,1516714112.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:32.169Z,1516714112.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:32.553Z,1516714112.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:32.571Z,1516714112.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:32.957Z,1516714112.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:32.977Z,1516714112.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:33.356Z,1516714113.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:33.400Z,1516714113.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:33.753Z,1516714113.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:33.772Z,1516714113.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:34.147Z,1516714114.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:34.180Z,1516714114.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:34.565Z,1516714114.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:34.580Z,1516714114.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:34.964Z,1516714114.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:35.001Z,1516714115.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:35.359Z,1516714115.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:35.378Z,1516714115.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:35.751Z,1516714115.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:35.769Z,1516714115.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:36.144Z,1516714116.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:36.183Z,1516714116.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:36.564Z,1516714116.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:36.582Z,1516714116.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:36.964Z,1516714116.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:36.982Z,1516714116.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:37.361Z,1516714117.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:37.378Z,1516714117.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:37.741Z,1516714117.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:37.785Z,1516714117.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:38.144Z,1516714118.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:38.189Z,1516714118.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:38.560Z,1516714118.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:38.579Z,1516714118.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:38.965Z,1516714118.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:38.982Z,1516714118.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:39.363Z,1516714119.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:39.378Z,1516714119.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:39.741Z,1516714119.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:39.788Z,1516714119.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:40.144Z,1516714120.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:40.172Z,1516714120.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:40.558Z,1516714120.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:40.592Z,1516714120.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:40.961Z,1516714120.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:40.997Z,1516714120.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:41.364Z,1516714121.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:41.402Z,1516714121.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:41.741Z,1516714121.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:41.782Z,1516714121.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:42.149Z,1516714122.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:42.184Z,1516714122.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:42.552Z,1516714122.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:42.589Z,1516714122.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:42.955Z,1516714122.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:42.982Z,1516714122.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:43.356Z,1516714123.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:43.387Z,1516714123.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:43.741Z,1516714123.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:43.757Z,1516714123.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:44.144Z,1516714124.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:44.162Z,1516714124.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:44.556Z,1516714124.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:44.587Z,1516714124.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:44.964Z,1516714124.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:44.997Z,1516714124.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:45.355Z,1516714125.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:45.395Z,1516714125.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:45.752Z,1516714125.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:45.774Z,1516714125.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:46.145Z,1516714126.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:46.169Z,1516714126.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:46.551Z,1516714126.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:46.566Z,1516714126.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:46.951Z,1516714126.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:46.966Z,1516714126.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:47.352Z,1516714127.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:47.370Z,1516714127.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:47.750Z,1516714127.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:47.765Z,1516714127.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:48.148Z,1516714128.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:48.172Z,1516714128.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:48.556Z,1516714128.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:48.571Z,1516714128.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:48.956Z,1516714128.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:48.975Z,1516714128.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:49.357Z,1516714129.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:49.372Z,1516714129.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:49.750Z,1516714129.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:49.769Z,1516714129.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:50.150Z,1516714130.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:50.165Z,1516714130.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:50.553Z,1516714130.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:50.574Z,1516714130.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:50.961Z,1516714130.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:50.980Z,1516714130.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:51.361Z,1516714131.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:51.376Z,1516714131.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:51.760Z,1516714131.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:51.776Z,1516714131.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:52.141Z,1516714132.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:52.179Z,1516714132.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:52.556Z,1516714132.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:52.581Z,1516714132.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:52.960Z,1516714132.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:52.984Z,1516714132.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:53.356Z,1516714133.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:53.382Z,1516714133.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:53.741Z,1516714133.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:53.782Z,1516714133.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:54.140Z,1516714134.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:54.181Z,1516714134.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:54.560Z,1516714134.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:54.593Z,1516714134.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:54.960Z,1516714134.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:54.986Z,1516714134.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:55.360Z,1516714135.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:55.390Z,1516714135.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:55.754Z,1516714135.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:55.783Z,1516714135.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:56.152Z,1516714136.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:56.185Z,1516714136.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:56.560Z,1516714136.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:56.596Z,1516714136.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:56.970Z,1516714136.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:56.993Z,1516714136.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:57.360Z,1516714137.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:57.381Z,1516714137.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:57.748Z,1516714137.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:57.779Z,1516714137.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:58.150Z,1516714138.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:58.165Z,1516714138.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:58.560Z,1516714138.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:58.598Z,1516714138.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:58.956Z,1516714138.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:58.992Z,1516714138.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:59.364Z,1516714139.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:59.393Z,1516714139.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:28:59.754Z,1516714139.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:28:59.769Z,1516714139.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:00.142Z,1516714140.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:00.165Z,1516714140.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:00.557Z,1516714140.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:00.572Z,1516714140.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:00.955Z,1516714140.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:00.971Z,1516714140.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:01.354Z,1516714141.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:01.370Z,1516714141.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:01.755Z,1516714141.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:01.771Z,1516714141.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:02.150Z,1516714142.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:02.164Z,1516714142.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:02.554Z,1516714142.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:02.577Z,1516714142.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:02.958Z,1516714142.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:02.973Z,1516714142.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:03.359Z,1516714143.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:03.380Z,1516714143.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:03.754Z,1516714143.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:03.777Z,1516714143.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:04.153Z,1516714144.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:04.168Z,1516714144.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:04.559Z,1516714144.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:04.580Z,1516714144.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:04.960Z,1516714144.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:04.988Z,1516714144.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:05.360Z,1516714145.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:05.375Z,1516714145.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:05.741Z,1516714145.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:05.775Z,1516714145.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:06.140Z,1516714146.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:06.167Z,1516714146.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:06.556Z,1516714146.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:06.579Z,1516714146.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:06.964Z,1516714146.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:06.979Z,1516714146.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:07.360Z,1516714147.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:07.375Z,1516714147.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:07.740Z,1516714147.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:07.777Z,1516714147.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:08.145Z,1516714148.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:08.173Z,1516714148.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:08.540Z,1516714148.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:08.573Z,1516714148.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:08.964Z,1516714148.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:08.979Z,1516714148.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:09.365Z,1516714149.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:09.380Z,1516714149.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:09.752Z,1516714149.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:09.789Z,1516714149.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:10.144Z,1516714150.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:10.181Z,1516714150.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:10.541Z,1516714150.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:10.585Z,1516714150.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:10.945Z,1516714150.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:10.977Z,1516714150.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:11.348Z,1516714151.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:11.385Z,1516714151.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:11.755Z,1516714151.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:11.783Z,1516714151.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:12.156Z,1516714152.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:12.182Z,1516714152.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:12.552Z,1516714152.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:12.583Z,1516714152.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:12.953Z,1516714152.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:12.991Z,1516714152.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:13.339Z,1516714153.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:13.361Z,1516714153.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:13.754Z,1516714153.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:13.794Z,1516714153.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:14.145Z,1516714154.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:14.161Z,1516714154.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:14.552Z,1516714154.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:14.567Z,1516714154.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:14.956Z,1516714154.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:14.971Z,1516714154.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:15.364Z,1516714155.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:15.399Z,1516714155.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:15.750Z,1516714155.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:15.765Z,1516714155.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:16.146Z,1516714156.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:16.173Z,1516714156.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:16.553Z,1516714156.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:16.569Z,1516714156.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:16.954Z,1516714156.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:16.969Z,1516714156.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:17.356Z,1516714157.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:17.371Z,1516714157.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:17.755Z,1516714157.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:17.770Z,1516714157.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:18.149Z,1516714158.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:18.164Z,1516714158.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:18.548Z,1516714158.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:18.563Z,1516714158.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:18.944Z,1516714158.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:18.980Z,1516714158.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:19.353Z,1516714159.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:19.368Z,1516714159.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:19.754Z,1516714159.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:19.769Z,1516714159.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:20.156Z,1516714160.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:20.171Z,1516714160.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:20.567Z,1516714160.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:20.582Z,1516714160.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:20.945Z,1516714160.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:20.973Z,1516714160.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:21.350Z,1516714161.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:21.366Z,1516714161.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:21.744Z,1516714161.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:21.779Z,1516714161.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:22.148Z,1516714162.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:22.168Z,1516714162.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:22.544Z,1516714162.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:22.573Z,1516714162.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:22.960Z,1516714162.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:22.976Z,1516714162.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:23.364Z,1516714163.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:23.379Z,1516714163.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:23.761Z,1516714163.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:23.776Z,1516714163.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:24.140Z,1516714164.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:24.169Z,1516714164.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:24.548Z,1516714164.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:24.579Z,1516714164.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:24.958Z,1516714164.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:24.973Z,1516714164.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:28.046Z,1516714168.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:28.069Z,1516714168.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:28.175Z,1516714168.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:28.216Z,1516714168.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:28.536Z,1516714168.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:28.567Z,1516714168.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:28.936Z,1516714168.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:28.968Z,1516714168.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:29.317Z,1516714169.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:29.345Z,1516714169.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:29.724Z,1516714169.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:29.745Z,1516714169.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:30.122Z,1516714170.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:30.138Z,1516714170.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:30.516Z,1516714170.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:30.536Z,1516714170.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:30.928Z,1516714170.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:30.956Z,1516714170.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:31.335Z,1516714171.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:31.350Z,1516714171.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:31.731Z,1516714171.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:31.746Z,1516714171.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:32.116Z,1516714172.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:32.148Z,1516714172.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:32.519Z,1516714172.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:32.549Z,1516714172.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:32.926Z,1516714172.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:32.949Z,1516714172.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:33.325Z,1516714173.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:33.340Z,1516714173.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:33.732Z,1516714173.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:33.748Z,1516714173.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:34.134Z,1516714174.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:34.150Z,1516714174.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:34.528Z,1516714174.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:34.556Z,1516714174.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:34.913Z,1516714174.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:34.949Z,1516714174.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:35.323Z,1516714175.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:35.345Z,1516714175.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:35.713Z,1516714175.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:35.744Z,1516714175.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:36.117Z,1516714176.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:36.146Z,1516714176.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:36.510Z,1516714176.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:36.538Z,1516714176.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:36.923Z,1516714176.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:36.954Z,1516714176.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:37.336Z,1516714177.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:37.365Z,1516714177.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:37.723Z,1516714177.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:37.753Z,1516714177.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:38.113Z,1516714178.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:38.140Z,1516714178.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:38.516Z,1516714178.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:38.559Z,1516714178.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:38.918Z,1516714178.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:38.953Z,1516714178.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:39.316Z,1516714179.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:39.353Z,1516714179.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:39.727Z,1516714179.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:39.765Z,1516714179.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:40.123Z,1516714180.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:40.162Z,1516714180.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:40.536Z,1516714180.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:40.562Z,1516714180.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:40.917Z,1516714180.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:40.931Z,1516714180.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:41.317Z,1516714181.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:41.332Z,1516714181.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:41.717Z,1516714181.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:41.742Z,1516714181.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:42.122Z,1516714182.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:42.137Z,1516714182.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:42.516Z,1516714182.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:42.535Z,1516714182.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:42.927Z,1516714182.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:42.942Z,1516714182.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:43.327Z,1516714183.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:43.342Z,1516714183.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:43.724Z,1516714183.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:43.739Z,1516714183.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:44.118Z,1516714184.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:44.137Z,1516714184.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:44.521Z,1516714184.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:44.536Z,1516714184.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:44.920Z,1516714184.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:44.939Z,1516714184.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:45.320Z,1516714185.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:45.335Z,1516714185.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:45.731Z,1516714185.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:45.746Z,1516714185.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:46.129Z,1516714186.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:46.145Z,1516714186.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:46.532Z,1516714186.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:46.588Z,1516714186.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:46.921Z,1516714186.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:46.936Z,1516714186.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:47.320Z,1516714187.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:47.339Z,1516714187.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:47.716Z,1516714187.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:47.734Z,1516714187.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:48.130Z,1516714188.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:48.145Z,1516714188.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:48.510Z,1516714188.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:48.537Z,1516714188.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:48.930Z,1516714188.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:48.946Z,1516714188.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:49.334Z,1516714189.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:49.349Z,1516714189.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:49.731Z,1516714189.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:49.746Z,1516714189.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:50.117Z,1516714190.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:50.139Z,1516714190.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:50.516Z,1516714190.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:50.549Z,1516714190.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:50.920Z,1516714190.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:50.940Z,1516714190.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:51.315Z,1516714191.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:51.338Z,1516714191.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:51.730Z,1516714191.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:51.769Z,1516714191.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:52.130Z,1516714192.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:52.145Z,1516714192.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:52.530Z,1516714192.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:52.545Z,1516714192.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:52.922Z,1516714192.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:52.937Z,1516714192.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:53.321Z,1516714193.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:53.336Z,1516714193.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:53.719Z,1516714193.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:53.738Z,1516714193.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:54.117Z,1516714194.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:54.149Z,1516714194.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:54.510Z,1516714194.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:54.538Z,1516714194.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:54.932Z,1516714194.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:54.946Z,1516714194.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:55.332Z,1516714195.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:55.359Z,1516714195.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:55.731Z,1516714195.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:55.746Z,1516714195.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:56.113Z,1516714196.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:56.149Z,1516714196.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:56.512Z,1516714196.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:56.549Z,1516714196.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:56.914Z,1516714196.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:56.941Z,1516714196.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:57.317Z,1516714197.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:57.349Z,1516714197.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:57.731Z,1516714197.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:57.769Z,1516714197.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:58.123Z,1516714198.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:58.148Z,1516714198.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:58.531Z,1516714198.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:58.559Z,1516714198.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:58.921Z,1516714198.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:58.957Z,1516714198.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:59.321Z,1516714199.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:59.341Z,1516714199.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:29:59.722Z,1516714199.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:29:59.737Z,1516714199.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:00.118Z,1516714200.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:00.142Z,1516714200.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:00.520Z,1516714200.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:00.535Z,1516714200.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:00.939Z,1516714200.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:00.962Z,1516714200.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:00.965Z,1516714200.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:00.965Z,1516714200.965 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204 2018-01-23T13:30:00.965Z,1516714200.965 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:30:00.977Z,1516714200.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:30:01.328Z,1516714201.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:01.343Z,1516714201.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:01.368Z,1516714201.368 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:30:01.368Z,1516714201.368 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204 2018-01-23T13:30:01.724Z,1516714201.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:01.753Z,1516714201.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:01.754Z,1516714201.754 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:30:01.759Z,1516714201.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:30:01.759Z,1516714201.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:30:02.126Z,1516714202.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:02.140Z,1516714202.140 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:02.140Z,1516714202.141 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204 2018-01-23T13:30:02.141Z,1516714202.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:30:02.142Z,1516714202.142 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:02.142Z,1516714202.142 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 204 2018-01-23T13:30:02.143Z,1516714202.143 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:30:02.156Z,1516714202.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:30:02.156Z,1516714202.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:30:02.516Z,1516714202.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:02.580Z,1516714202.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:30:02.580Z,1516714202.580 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204 2018-01-23T13:30:02.580Z,1516714202.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:30:02.580Z,1516714202.580 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 204 2018-01-23T13:30:02.914Z,1516714202.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:02.940Z,1516714202.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:30:02.940Z,1516714202.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:30:02.940Z,1516714202.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:30:02.941Z,1516714202.941 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:30:02.941Z,1516714202.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:30:02.941Z,1516714202.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:30:03.313Z,1516714203.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:03.349Z,1516714203.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:30:03.349Z,1516714203.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:03.732Z,1516714203.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:03.753Z,1516714203.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:30:03.754Z,1516714203.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:04.132Z,1516714204.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:04.155Z,1516714204.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:30:04.156Z,1516714204.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:04.528Z,1516714204.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:04.554Z,1516714204.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:30:04.559Z,1516714204.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:04.914Z,1516714204.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:04.941Z,1516714204.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:30:04.942Z,1516714204.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:05.313Z,1516714205.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:05.328Z,1516714205.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:30:05.329Z,1516714205.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:05.714Z,1516714205.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:05.732Z,1516714205.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:30:05.733Z,1516714205.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:06.122Z,1516714206.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:06.137Z,1516714206.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:30:06.138Z,1516714206.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:06.518Z,1516714206.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:06.536Z,1516714206.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:30:06.537Z,1516714206.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:06.927Z,1516714206.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:06.942Z,1516714206.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:30:06.943Z,1516714206.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:07.329Z,1516714207.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:07.343Z,1516714207.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:30:07.344Z,1516714207.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:07.728Z,1516714207.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:07.749Z,1516714207.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:30:07.750Z,1516714207.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:08.121Z,1516714208.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:08.140Z,1516714208.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:30:08.141Z,1516714208.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:08.518Z,1516714208.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:08.537Z,1516714208.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:30:08.538Z,1516714208.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:08.913Z,1516714208.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:08.945Z,1516714208.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:30:08.946Z,1516714208.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:09.319Z,1516714209.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:09.357Z,1516714209.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:30:09.358Z,1516714209.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:09.736Z,1516714209.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:09.753Z,1516714209.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:30:09.754Z,1516714209.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:10.131Z,1516714210.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:10.154Z,1516714210.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:30:10.155Z,1516714210.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:10.524Z,1516714210.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:10.560Z,1516714210.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:30:10.561Z,1516714210.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:10.918Z,1516714210.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:10.932Z,1516714210.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:30:10.933Z,1516714210.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:11.321Z,1516714211.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:11.356Z,1516714211.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:30:11.357Z,1516714211.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:11.718Z,1516714211.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:11.736Z,1516714211.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:30:11.737Z,1516714211.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:12.118Z,1516714212.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:12.144Z,1516714212.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:30:12.145Z,1516714212.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:12.518Z,1516714212.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:12.541Z,1516714212.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:30:12.542Z,1516714212.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:12.932Z,1516714212.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:12.946Z,1516714212.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:30:12.948Z,1516714212.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:13.331Z,1516714213.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:13.345Z,1516714213.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:30:13.346Z,1516714213.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:13.731Z,1516714213.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:13.745Z,1516714213.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:30:13.746Z,1516714213.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:14.116Z,1516714214.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:14.139Z,1516714214.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:30:14.140Z,1516714214.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:14.522Z,1516714214.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:14.537Z,1516714214.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:30:14.537Z,1516714214.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:14.917Z,1516714214.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:14.949Z,1516714214.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:30:14.950Z,1516714214.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:15.325Z,1516714215.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:15.339Z,1516714215.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:30:15.340Z,1516714215.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:15.731Z,1516714215.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:15.751Z,1516714215.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:30:15.752Z,1516714215.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:16.135Z,1516714216.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:16.150Z,1516714216.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:30:16.151Z,1516714216.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:16.531Z,1516714216.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:16.553Z,1516714216.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:30:16.554Z,1516714216.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:16.919Z,1516714216.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:16.945Z,1516714216.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:30:16.946Z,1516714216.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:17.324Z,1516714217.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:17.345Z,1516714217.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:30:17.346Z,1516714217.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:17.720Z,1516714217.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:17.738Z,1516714217.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:30:17.739Z,1516714217.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:18.120Z,1516714218.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:18.149Z,1516714218.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:30:18.150Z,1516714218.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:18.516Z,1516714218.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:18.544Z,1516714218.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:30:18.545Z,1516714218.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:18.931Z,1516714218.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:18.945Z,1516714218.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:30:18.946Z,1516714218.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:19.334Z,1516714219.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:19.353Z,1516714219.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:30:19.353Z,1516714219.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:19.731Z,1516714219.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:19.745Z,1516714219.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:30:19.746Z,1516714219.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:20.119Z,1516714220.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:20.138Z,1516714220.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:30:20.139Z,1516714220.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:20.519Z,1516714220.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:20.549Z,1516714220.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:30:20.550Z,1516714220.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:20.926Z,1516714220.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:20.940Z,1516714220.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:30:20.941Z,1516714220.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:21.315Z,1516714221.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:21.342Z,1516714221.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:30:21.347Z,1516714221.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:21.730Z,1516714221.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:21.753Z,1516714221.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:30:21.754Z,1516714221.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:22.137Z,1516714222.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:22.153Z,1516714222.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:22.530Z,1516714222.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:22.546Z,1516714222.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:22.913Z,1516714222.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:22.950Z,1516714222.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:23.324Z,1516714223.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:23.349Z,1516714223.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:23.353Z,1516714223.353 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:25:22.0Z 2018-01-23T13:30:23.353Z,1516714223.353 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T13:30:23.353Z,1516714223.353 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T13:30:23.728Z,1516714223.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:23.756Z,1516714223.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:24.251Z,1516714224.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:24.266Z,1516714224.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:24.536Z,1516714224.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:24.551Z,1516714224.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:27.630Z,1516714227.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:27.645Z,1516714227.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:27.731Z,1516714227.731 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0240.lzma 2018-01-23T13:30:27.752Z,1516714227.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:27.800Z,1516714227.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:28.099Z,1516714228.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:28.115Z,1516714228.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:28.470Z,1516714228.470 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0240.lzma.bak 2018-01-23T13:30:28.470Z,1516714228.470 [DataOverHttps](INFO): SBD MOMSN=7755642 2018-01-23T13:30:28.512Z,1516714228.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:28.541Z,1516714228.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:29.150Z,1516714229.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:29.165Z,1516714229.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:29.296Z,1516714229.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:29.333Z,1516714229.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:32.397Z,1516714232.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:32.413Z,1516714232.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:32.509Z,1516714232.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:32.548Z,1516714232.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:32.898Z,1516714232.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:32.917Z,1516714232.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:33.303Z,1516714233.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:33.318Z,1516714233.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:33.698Z,1516714233.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:33.717Z,1516714233.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:34.090Z,1516714234.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:34.109Z,1516714234.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:37.182Z,1516714237.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:37.197Z,1516714237.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:37.280Z,1516714237.280 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0241.lzma 2018-01-23T13:30:37.310Z,1516714237.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:37.349Z,1516714237.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:37.662Z,1516714237.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:37.678Z,1516714237.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:38.021Z,1516714238.021 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0241.lzma.bak 2018-01-23T13:30:38.022Z,1516714238.022 [DataOverHttps](INFO): SBD MOMSN=7755644 2018-01-23T13:30:38.065Z,1516714238.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:38.101Z,1516714238.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:38.701Z,1516714238.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:38.716Z,1516714238.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:38.719Z,1516714238.719 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T13:30:38.719Z,1516714238.719 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T13:30:38.719Z,1516714238.719 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T13:30:38.842Z,1516714238.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:38.882Z,1516714238.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:41.941Z,1516714241.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:41.969Z,1516714241.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:42.065Z,1516714242.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:42.085Z,1516714242.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:42.432Z,1516714242.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:42.467Z,1516714242.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:42.835Z,1516714242.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:42.850Z,1516714242.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:43.236Z,1516714243.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:43.250Z,1516714243.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:43.621Z,1516714243.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:43.640Z,1516714243.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:44.023Z,1516714244.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:44.038Z,1516714244.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:44.421Z,1516714244.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:44.437Z,1516714244.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:44.826Z,1516714244.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:44.842Z,1516714244.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:45.226Z,1516714245.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:45.242Z,1516714245.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:45.625Z,1516714245.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:45.642Z,1516714245.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:46.020Z,1516714246.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:46.036Z,1516714246.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:46.425Z,1516714246.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:46.441Z,1516714246.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:46.817Z,1516714246.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:46.836Z,1516714246.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:47.217Z,1516714247.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:47.244Z,1516714247.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:47.625Z,1516714247.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:47.641Z,1516714247.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:48.030Z,1516714248.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:48.052Z,1516714248.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:48.429Z,1516714248.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:48.449Z,1516714248.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:48.830Z,1516714248.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:48.845Z,1516714248.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:49.220Z,1516714249.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:49.235Z,1516714249.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:49.629Z,1516714249.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:49.645Z,1516714249.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:50.022Z,1516714250.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:50.040Z,1516714250.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:50.420Z,1516714250.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:50.435Z,1516714250.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:50.826Z,1516714250.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:50.853Z,1516714250.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:51.235Z,1516714251.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:51.250Z,1516714251.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:51.631Z,1516714251.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:51.653Z,1516714251.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:52.016Z,1516714252.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:52.038Z,1516714252.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:52.429Z,1516714252.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:52.444Z,1516714252.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:52.823Z,1516714252.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:52.838Z,1516714252.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:53.232Z,1516714253.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:53.253Z,1516714253.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:53.620Z,1516714253.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:53.635Z,1516714253.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:54.031Z,1516714254.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:54.046Z,1516714254.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:54.436Z,1516714254.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:54.450Z,1516714254.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:54.834Z,1516714254.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:54.849Z,1516714254.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:55.216Z,1516714255.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:55.239Z,1516714255.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:55.616Z,1516714255.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:55.639Z,1516714255.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:56.024Z,1516714256.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:56.039Z,1516714256.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:56.420Z,1516714256.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:56.443Z,1516714256.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:56.831Z,1516714256.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:56.853Z,1516714256.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:57.236Z,1516714257.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:57.256Z,1516714257.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:57.631Z,1516714257.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:57.653Z,1516714257.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:58.028Z,1516714258.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:58.049Z,1516714258.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:58.413Z,1516714258.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:58.449Z,1516714258.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:58.812Z,1516714258.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:58.845Z,1516714258.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:59.219Z,1516714259.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:59.242Z,1516714259.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:30:59.634Z,1516714259.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:30:59.657Z,1516714259.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:00.028Z,1516714260.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:00.055Z,1516714260.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:00.439Z,1516714260.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:00.454Z,1516714260.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:00.828Z,1516714260.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:00.853Z,1516714260.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:01.228Z,1516714261.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:01.247Z,1516714261.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:01.632Z,1516714261.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:01.653Z,1516714261.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:02.030Z,1516714262.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:02.046Z,1516714262.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:02.428Z,1516714262.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:02.443Z,1516714262.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:02.832Z,1516714262.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:02.853Z,1516714262.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:03.243Z,1516714263.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:03.258Z,1516714263.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:03.628Z,1516714263.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:03.650Z,1516714263.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:04.015Z,1516714264.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:04.049Z,1516714264.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:04.415Z,1516714264.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:04.452Z,1516714264.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:04.816Z,1516714264.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:04.849Z,1516714264.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:05.213Z,1516714265.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:05.245Z,1516714265.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:05.615Z,1516714265.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:05.651Z,1516714265.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:06.026Z,1516714266.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:06.058Z,1516714266.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:06.460Z,1516714266.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:06.532Z,1516714266.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:06.840Z,1516714266.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:06.855Z,1516714266.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:07.214Z,1516714267.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:07.249Z,1516714267.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:07.619Z,1516714267.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:07.653Z,1516714267.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:08.018Z,1516714268.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:08.049Z,1516714268.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:08.416Z,1516714268.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:08.449Z,1516714268.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:08.841Z,1516714268.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:08.861Z,1516714268.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:09.362Z,1516714269.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:09.412Z,1516714269.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:09.625Z,1516714269.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:09.661Z,1516714269.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:10.038Z,1516714270.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:10.066Z,1516714270.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:10.421Z,1516714270.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:10.437Z,1516714270.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:10.819Z,1516714270.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:10.869Z,1516714270.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:11.225Z,1516714271.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:11.277Z,1516714271.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:11.623Z,1516714271.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:11.669Z,1516714271.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:12.037Z,1516714272.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:12.061Z,1516714272.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:12.440Z,1516714272.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:12.461Z,1516714272.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:12.832Z,1516714272.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:12.879Z,1516714272.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:13.216Z,1516714273.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:13.244Z,1516714273.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:13.654Z,1516714273.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:13.712Z,1516714273.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:14.018Z,1516714274.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:14.053Z,1516714274.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:14.421Z,1516714274.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:14.461Z,1516714274.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:14.834Z,1516714274.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:14.869Z,1516714274.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:15.256Z,1516714275.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:15.283Z,1516714275.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:15.640Z,1516714275.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:15.687Z,1516714275.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:16.029Z,1516714276.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:16.079Z,1516714276.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:16.428Z,1516714276.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:16.478Z,1516714276.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:16.828Z,1516714276.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:16.878Z,1516714276.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:17.230Z,1516714277.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:17.253Z,1516714277.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:17.670Z,1516714277.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:17.731Z,1516714277.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:18.038Z,1516714278.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:18.065Z,1516714278.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:18.445Z,1516714278.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:18.473Z,1516714278.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:18.836Z,1516714278.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:18.869Z,1516714278.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:19.220Z,1516714279.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:19.258Z,1516714279.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:19.621Z,1516714279.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:19.672Z,1516714279.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:20.023Z,1516714280.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:20.061Z,1516714280.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:20.417Z,1516714280.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:20.427Z,1516714280.427 [PNI_TCM](ERROR): CRC does not match. Expected:0x38015 got:0x33224 2018-01-23T13:31:20.460Z,1516714280.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:20.850Z,1516714280.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:20.867Z,1516714280.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x22883 got:0x61725 2018-01-23T13:31:20.897Z,1516714280.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:21.231Z,1516714281.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:21.281Z,1516714281.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:21.628Z,1516714281.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:21.677Z,1516714281.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:22.029Z,1516714282.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:22.037Z,1516714282.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x64729 got:0x49796 2018-01-23T13:31:22.085Z,1516714282.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:22.428Z,1516714282.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:22.460Z,1516714282.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:22.825Z,1516714282.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:22.853Z,1516714282.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:23.228Z,1516714283.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:23.262Z,1516714283.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:23.614Z,1516714283.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:23.638Z,1516714283.638 [PNI_TCM](ERROR): CRC does not match. Expected:0x6986 got:0x1304 2018-01-23T13:31:23.692Z,1516714283.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:24.037Z,1516714284.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:24.065Z,1516714284.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:24.443Z,1516714284.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:24.458Z,1516714284.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:24.844Z,1516714284.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:24.897Z,1516714284.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:25.218Z,1516714285.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:25.261Z,1516714285.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:25.672Z,1516714285.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:25.695Z,1516714285.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:26.027Z,1516714286.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:26.062Z,1516714286.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:26.417Z,1516714286.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:26.462Z,1516714286.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:26.837Z,1516714286.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:26.863Z,1516714286.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:27.246Z,1516714287.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:27.261Z,1516714287.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:27.633Z,1516714287.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:27.657Z,1516714287.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:28.024Z,1516714288.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:28.068Z,1516714288.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:28.424Z,1516714288.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:28.464Z,1516714288.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:28.820Z,1516714288.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:28.855Z,1516714288.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:29.227Z,1516714289.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:29.242Z,1516714289.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:29.621Z,1516714289.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:29.665Z,1516714289.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:30.027Z,1516714290.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:30.047Z,1516714290.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:30.433Z,1516714290.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:30.449Z,1516714290.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:30.829Z,1516714290.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:30.844Z,1516714290.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:31.220Z,1516714291.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:31.270Z,1516714291.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:31.617Z,1516714291.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:31.646Z,1516714291.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:32.022Z,1516714292.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:32.041Z,1516714292.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:32.416Z,1516714292.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:32.449Z,1516714292.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:32.835Z,1516714292.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:32.874Z,1516714292.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:33.236Z,1516714293.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:33.254Z,1516714293.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:33.632Z,1516714293.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:33.650Z,1516714293.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:34.013Z,1516714294.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:34.045Z,1516714294.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:34.411Z,1516714294.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:34.449Z,1516714294.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:34.796Z,1516714294.796 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T13:31:34.796Z,1516714294.796 [NAL9602] Data Fault, FailCount= 1 2018-01-23T13:31:34.796Z,1516714294.796 [NAL9602](ERROR): Data Fault 2018-01-23T13:31:34.813Z,1516714294.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:34.858Z,1516714294.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:34.888Z,1516714294.888 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T13:31:35.196Z,1516714295.196 [NAL9602](INFO): Powering down 2018-01-23T13:31:35.213Z,1516714295.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:35.255Z,1516714295.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:35.612Z,1516714295.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:35.643Z,1516714295.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:36.012Z,1516714296.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:36.071Z,1516714296.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:36.093Z,1516714296.093 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T13:31:36.093Z,1516714296.093 [NAL9602] No Fault, FailCount= 1 2018-01-23T13:31:36.420Z,1516714296.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:36.457Z,1516714296.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:36.809Z,1516714296.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:36.824Z,1516714296.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:37.211Z,1516714297.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:37.227Z,1516714297.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:37.624Z,1516714297.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:37.638Z,1516714297.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:38.010Z,1516714298.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:38.025Z,1516714298.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:38.424Z,1516714298.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:38.456Z,1516714298.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:38.817Z,1516714298.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:38.840Z,1516714298.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:39.221Z,1516714299.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:39.235Z,1516714299.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:42.317Z,1516714302.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:42.333Z,1516714302.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:42.425Z,1516714302.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:42.469Z,1516714302.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:42.796Z,1516714302.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:42.821Z,1516714302.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:43.212Z,1516714303.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:43.227Z,1516714303.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:43.596Z,1516714303.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:43.629Z,1516714303.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:44.008Z,1516714304.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:44.022Z,1516714304.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:44.408Z,1516714304.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:44.423Z,1516714304.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:44.796Z,1516714304.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:44.829Z,1516714304.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:45.196Z,1516714305.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:45.230Z,1516714305.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:45.596Z,1516714305.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:45.633Z,1516714305.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:45.996Z,1516714305.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:46.029Z,1516714306.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:46.398Z,1516714306.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:46.431Z,1516714306.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:46.797Z,1516714306.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:46.824Z,1516714306.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:47.197Z,1516714307.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:47.229Z,1516714307.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:47.595Z,1516714307.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:47.621Z,1516714307.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:47.000Z,1516714308.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:48.038Z,1516714308.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:48.396Z,1516714308.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:48.433Z,1516714308.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:48.796Z,1516714308.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:48.822Z,1516714308.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:49.196Z,1516714309.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:49.230Z,1516714309.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:49.596Z,1516714309.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:49.633Z,1516714309.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:49.000Z,1516714310.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:50.028Z,1516714310.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:50.396Z,1516714310.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:50.433Z,1516714310.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:50.800Z,1516714310.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:50.835Z,1516714310.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:51.197Z,1516714311.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:51.234Z,1516714311.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:51.597Z,1516714311.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:51.620Z,1516714311.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:51.997Z,1516714311.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:52.012Z,1516714312.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:52.401Z,1516714312.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:52.446Z,1516714312.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:52.793Z,1516714312.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:52.809Z,1516714312.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:53.201Z,1516714313.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:53.216Z,1516714313.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:53.609Z,1516714313.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:53.623Z,1516714313.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:54.001Z,1516714314.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:54.017Z,1516714314.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:54.404Z,1516714314.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:54.419Z,1516714314.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:54.801Z,1516714314.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:54.821Z,1516714314.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:55.206Z,1516714315.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:55.221Z,1516714315.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:55.604Z,1516714315.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:55.619Z,1516714315.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:56.004Z,1516714316.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:56.024Z,1516714316.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:56.402Z,1516714316.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:56.417Z,1516714316.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:56.803Z,1516714316.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:56.825Z,1516714316.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:57.203Z,1516714317.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:57.218Z,1516714317.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:57.601Z,1516714317.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:57.617Z,1516714317.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:58.003Z,1516714318.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:58.018Z,1516714318.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:58.403Z,1516714318.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:58.425Z,1516714318.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:58.801Z,1516714318.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:58.816Z,1516714318.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:59.203Z,1516714319.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:59.218Z,1516714319.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:31:59.609Z,1516714319.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:31:59.623Z,1516714319.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:00.001Z,1516714320.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:00.015Z,1516714320.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:00.403Z,1516714320.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:00.418Z,1516714320.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:00.803Z,1516714320.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:00.817Z,1516714320.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:01.205Z,1516714321.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:01.219Z,1516714321.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:01.603Z,1516714321.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:01.618Z,1516714321.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:01.000Z,1516714322.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:02.028Z,1516714322.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:02.403Z,1516714322.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:02.417Z,1516714322.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:02.803Z,1516714322.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:02.818Z,1516714322.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:03.203Z,1516714323.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:03.217Z,1516714323.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:03.601Z,1516714323.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:03.616Z,1516714323.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:04.003Z,1516714324.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:04.018Z,1516714324.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:04.400Z,1516714324.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:04.428Z,1516714324.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:04.801Z,1516714324.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:04.816Z,1516714324.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:05.203Z,1516714325.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:05.218Z,1516714325.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:05.580Z,1516714325.580 [NAL9602](INFO): Powering up NAL9602 2018-01-23T13:32:05.605Z,1516714325.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:05.631Z,1516714325.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:05.996Z,1516714325.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:06.031Z,1516714326.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:06.396Z,1516714326.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:06.422Z,1516714326.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:06.797Z,1516714326.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:06.822Z,1516714326.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:07.197Z,1516714327.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:07.216Z,1516714327.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:07.597Z,1516714327.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:07.613Z,1516714327.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:07.996Z,1516714327.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:08.040Z,1516714328.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:08.400Z,1516714328.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:08.440Z,1516714328.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:08.800Z,1516714328.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:08.835Z,1516714328.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:09.200Z,1516714329.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:09.214Z,1516714329.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:09.593Z,1516714329.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:09.608Z,1516714329.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:09.996Z,1516714329.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:10.011Z,1516714330.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:10.400Z,1516714330.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:10.415Z,1516714330.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:10.796Z,1516714330.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:10.811Z,1516714330.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:11.208Z,1516714331.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:11.239Z,1516714331.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:11.601Z,1516714331.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:11.620Z,1516714331.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:12.001Z,1516714332.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:12.015Z,1516714332.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:12.408Z,1516714332.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:12.423Z,1516714332.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:12.802Z,1516714332.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:12.817Z,1516714332.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:13.200Z,1516714333.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:13.226Z,1516714333.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:13.605Z,1516714333.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:13.620Z,1516714333.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:14.001Z,1516714334.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:14.028Z,1516714334.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:14.402Z,1516714334.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:14.417Z,1516714334.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:14.802Z,1516714334.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:14.821Z,1516714334.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:15.203Z,1516714335.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:15.217Z,1516714335.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:15.601Z,1516714335.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:15.616Z,1516714335.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:16.011Z,1516714336.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:16.026Z,1516714336.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:16.390Z,1516714336.390 [NAL9602](INFO): NAL9602 initialized 2018-01-23T13:32:16.407Z,1516714336.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:16.448Z,1516714336.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:16.803Z,1516714336.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:16.818Z,1516714336.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:17.219Z,1516714337.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:17.234Z,1516714337.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:17.611Z,1516714337.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:17.626Z,1516714337.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:18.009Z,1516714338.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:18.028Z,1516714338.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:18.410Z,1516714338.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:18.425Z,1516714338.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:18.804Z,1516714338.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:18.822Z,1516714338.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:19.204Z,1516714339.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:19.218Z,1516714339.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:19.611Z,1516714339.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:19.626Z,1516714339.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:20.012Z,1516714340.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:20.026Z,1516714340.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:20.410Z,1516714340.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:20.424Z,1516714340.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:20.806Z,1516714340.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:20.821Z,1516714340.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:21.204Z,1516714341.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:21.225Z,1516714341.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:21.605Z,1516714341.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:21.620Z,1516714341.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:22.005Z,1516714342.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:22.020Z,1516714342.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:22.409Z,1516714342.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:22.429Z,1516714342.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:22.815Z,1516714342.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:22.830Z,1516714342.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:23.212Z,1516714343.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:23.226Z,1516714343.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:23.604Z,1516714343.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:23.625Z,1516714343.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:24.004Z,1516714344.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:24.019Z,1516714344.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:24.406Z,1516714344.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:24.421Z,1516714344.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:24.804Z,1516714344.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:24.823Z,1516714344.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:25.205Z,1516714345.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:25.224Z,1516714345.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:25.611Z,1516714345.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:25.626Z,1516714345.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:26.023Z,1516714346.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:26.038Z,1516714346.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:26.415Z,1516714346.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:26.429Z,1516714346.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:26.810Z,1516714346.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:26.825Z,1516714346.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:27.205Z,1516714347.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:27.220Z,1516714347.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:27.607Z,1516714347.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:27.621Z,1516714347.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:28.004Z,1516714348.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:28.025Z,1516714348.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:28.416Z,1516714348.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:28.431Z,1516714348.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:28.815Z,1516714348.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:28.830Z,1516714348.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:29.213Z,1516714349.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:29.236Z,1516714349.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:29.600Z,1516714349.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:29.627Z,1516714349.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:29.997Z,1516714349.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:30.025Z,1516714350.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:30.411Z,1516714350.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:30.427Z,1516714350.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:30.798Z,1516714350.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:30.834Z,1516714350.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:31.197Z,1516714351.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:31.233Z,1516714351.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:31.618Z,1516714351.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:31.641Z,1516714351.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:32.023Z,1516714352.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:32.038Z,1516714352.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:32.417Z,1516714352.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:32.432Z,1516714352.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:32.797Z,1516714352.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:32.837Z,1516714352.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:33.197Z,1516714353.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:33.234Z,1516714353.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:33.598Z,1516714353.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:33.625Z,1516714353.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:33.995Z,1516714353.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:34.035Z,1516714354.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:34.420Z,1516714354.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:34.441Z,1516714354.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:34.820Z,1516714354.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:34.835Z,1516714354.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:35.220Z,1516714355.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:35.236Z,1516714355.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:35.596Z,1516714355.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:35.633Z,1516714355.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:36.000Z,1516714356.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:36.027Z,1516714356.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:36.394Z,1516714356.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:36.417Z,1516714356.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:36.797Z,1516714356.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:36.824Z,1516714356.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:37.196Z,1516714357.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:37.211Z,1516714357.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:37.607Z,1516714357.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:37.630Z,1516714357.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:38.015Z,1516714358.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:38.040Z,1516714358.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:38.415Z,1516714358.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:38.449Z,1516714358.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:38.798Z,1516714358.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:38.813Z,1516714358.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:39.209Z,1516714359.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:39.245Z,1516714359.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:39.606Z,1516714359.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:39.621Z,1516714359.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:42.714Z,1516714362.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:42.730Z,1516714362.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:42.853Z,1516714362.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:42.895Z,1516714362.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:43.219Z,1516714363.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:43.234Z,1516714363.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:43.619Z,1516714363.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:43.634Z,1516714363.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:44.007Z,1516714364.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:44.022Z,1516714364.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:44.407Z,1516714364.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:44.422Z,1516714364.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:44.807Z,1516714364.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:44.822Z,1516714364.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:45.206Z,1516714365.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:45.233Z,1516714365.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:45.613Z,1516714365.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:45.628Z,1516714365.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:46.014Z,1516714366.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:46.029Z,1516714366.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:46.414Z,1516714366.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:46.433Z,1516714366.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:46.808Z,1516714366.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:46.823Z,1516714366.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:47.209Z,1516714367.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:47.224Z,1516714367.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:47.614Z,1516714367.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:47.629Z,1516714367.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:48.006Z,1516714368.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:48.033Z,1516714368.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:48.415Z,1516714368.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:48.430Z,1516714368.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:48.815Z,1516714368.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:48.830Z,1516714368.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:49.213Z,1516714369.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:49.229Z,1516714369.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:49.607Z,1516714369.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:49.622Z,1516714369.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:50.008Z,1516714370.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:50.037Z,1516714370.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:50.408Z,1516714370.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:50.423Z,1516714370.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:50.810Z,1516714370.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:50.825Z,1516714370.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:51.204Z,1516714371.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:51.235Z,1516714371.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:51.617Z,1516714371.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:51.632Z,1516714371.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:52.018Z,1516714372.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:52.033Z,1516714372.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:52.418Z,1516714372.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:52.437Z,1516714372.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:52.812Z,1516714372.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:52.827Z,1516714372.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:53.206Z,1516714373.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:53.222Z,1516714373.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:53.604Z,1516714373.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:53.626Z,1516714373.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:54.008Z,1516714374.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:54.023Z,1516714374.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:54.419Z,1516714374.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:54.434Z,1516714374.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:54.822Z,1516714374.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:54.841Z,1516714374.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:55.222Z,1516714375.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:55.240Z,1516714375.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:55.598Z,1516714375.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:55.625Z,1516714375.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:56.007Z,1516714376.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:56.026Z,1516714376.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:56.409Z,1516714376.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:56.428Z,1516714376.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:56.807Z,1516714376.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:56.826Z,1516714376.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:57.205Z,1516714377.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:57.227Z,1516714377.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:57.619Z,1516714377.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:57.633Z,1516714377.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:58.018Z,1516714378.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:58.033Z,1516714378.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:58.419Z,1516714378.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:58.433Z,1516714378.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:58.808Z,1516714378.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:58.829Z,1516714378.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:59.213Z,1516714379.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:59.228Z,1516714379.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:32:59.603Z,1516714379.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:32:59.636Z,1516714379.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:00.008Z,1516714380.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:00.023Z,1516714380.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:00.420Z,1516714380.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:00.435Z,1516714380.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:00.822Z,1516714380.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:00.837Z,1516714380.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:01.219Z,1516714381.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:01.240Z,1516714381.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:01.598Z,1516714381.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:01.625Z,1516714381.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:02.000Z,1516714382.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:02.037Z,1516714382.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:02.043Z,1516714382.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:02.043Z,1516714382.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205 2018-01-23T13:33:02.043Z,1516714382.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:33:02.063Z,1516714382.063 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:33:02.400Z,1516714382.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:02.433Z,1516714382.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:02.445Z,1516714382.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:33:02.445Z,1516714382.445 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205 2018-01-23T13:33:02.801Z,1516714382.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:02.840Z,1516714382.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:02.841Z,1516714382.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:33:02.842Z,1516714382.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:33:02.842Z,1516714382.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:33:03.200Z,1516714383.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:03.236Z,1516714383.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:03.236Z,1516714383.236 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205 2018-01-23T13:33:03.236Z,1516714383.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:33:03.238Z,1516714383.238 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:03.238Z,1516714383.238 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 205 2018-01-23T13:33:03.238Z,1516714383.238 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:33:03.251Z,1516714383.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:33:03.251Z,1516714383.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:33:03.611Z,1516714383.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:03.660Z,1516714383.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:33:03.660Z,1516714383.660 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205 2018-01-23T13:33:03.660Z,1516714383.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:33:03.660Z,1516714383.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 205 2018-01-23T13:33:04.011Z,1516714384.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:04.037Z,1516714384.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:33:04.037Z,1516714384.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:33:04.037Z,1516714384.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:33:04.038Z,1516714384.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:33:04.038Z,1516714384.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:33:04.043Z,1516714384.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:33:04.411Z,1516714384.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:04.442Z,1516714384.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:33:04.447Z,1516714384.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:04.808Z,1516714384.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:04.822Z,1516714384.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:33:04.823Z,1516714384.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:05.201Z,1516714385.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:05.215Z,1516714385.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:33:05.216Z,1516714385.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:05.613Z,1516714385.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:05.628Z,1516714385.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:33:05.629Z,1516714385.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:06.010Z,1516714386.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:06.024Z,1516714386.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:33:06.025Z,1516714386.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:06.423Z,1516714386.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:06.454Z,1516714386.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:33:06.459Z,1516714386.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:06.827Z,1516714386.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:06.858Z,1516714386.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:33:06.863Z,1516714386.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:07.216Z,1516714387.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:07.231Z,1516714387.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:33:07.232Z,1516714387.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:07.609Z,1516714387.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:07.628Z,1516714387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:33:07.629Z,1516714387.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:08.009Z,1516714388.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:08.024Z,1516714388.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:33:08.025Z,1516714388.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:08.408Z,1516714388.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:08.428Z,1516714388.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:33:08.429Z,1516714388.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:08.808Z,1516714388.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:08.824Z,1516714388.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:33:08.825Z,1516714388.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:09.209Z,1516714389.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:09.224Z,1516714389.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:33:09.225Z,1516714389.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:09.615Z,1516714389.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:09.630Z,1516714389.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:33:09.631Z,1516714389.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:10.017Z,1516714390.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:10.032Z,1516714390.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:33:10.033Z,1516714390.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:10.412Z,1516714390.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:10.436Z,1516714390.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:33:10.437Z,1516714390.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:10.810Z,1516714390.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:10.831Z,1516714390.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:33:10.832Z,1516714390.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:11.216Z,1516714391.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:11.230Z,1516714391.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:33:11.232Z,1516714391.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:11.605Z,1516714391.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:11.640Z,1516714391.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:33:11.641Z,1516714391.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:12.013Z,1516714392.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:12.027Z,1516714392.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:33:12.028Z,1516714392.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:12.424Z,1516714392.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:12.438Z,1516714392.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:33:12.440Z,1516714392.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:12.823Z,1516714392.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:12.838Z,1516714392.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:33:12.839Z,1516714392.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:13.219Z,1516714393.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:13.234Z,1516714393.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:33:13.235Z,1516714393.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:13.599Z,1516714393.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:13.630Z,1516714393.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:33:13.635Z,1516714393.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:14.001Z,1516714394.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:14.036Z,1516714394.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:33:14.037Z,1516714394.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:14.400Z,1516714394.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:14.427Z,1516714394.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:33:14.428Z,1516714394.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:14.799Z,1516714394.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:14.826Z,1516714394.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:33:14.831Z,1516714394.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:15.200Z,1516714395.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:15.232Z,1516714395.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:33:15.233Z,1516714395.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:15.611Z,1516714395.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:15.642Z,1516714395.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:33:15.643Z,1516714395.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:16.011Z,1516714396.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:16.033Z,1516714396.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:33:16.034Z,1516714396.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:16.423Z,1516714396.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:16.457Z,1516714396.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:33:16.458Z,1516714396.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:16.812Z,1516714396.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:16.850Z,1516714396.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:33:16.851Z,1516714396.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:17.208Z,1516714397.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:17.223Z,1516714397.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:33:17.224Z,1516714397.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:17.605Z,1516714397.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:17.624Z,1516714397.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:33:17.625Z,1516714397.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:18.007Z,1516714398.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:18.021Z,1516714398.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:33:18.022Z,1516714398.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:18.415Z,1516714398.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:18.430Z,1516714398.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:33:18.431Z,1516714398.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:18.823Z,1516714398.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:18.855Z,1516714398.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:33:18.856Z,1516714398.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:19.211Z,1516714399.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:19.232Z,1516714399.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:33:19.233Z,1516714399.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:19.607Z,1516714399.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:19.621Z,1516714399.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:33:19.622Z,1516714399.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:20.006Z,1516714400.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:20.029Z,1516714400.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:33:20.030Z,1516714400.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:20.406Z,1516714400.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:20.420Z,1516714400.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:33:20.421Z,1516714400.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:20.809Z,1516714400.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:20.823Z,1516714400.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:33:20.824Z,1516714400.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:21.207Z,1516714401.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:21.222Z,1516714401.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:33:21.223Z,1516714401.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:21.611Z,1516714401.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:21.632Z,1516714401.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:33:21.633Z,1516714401.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:22.010Z,1516714402.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:22.025Z,1516714402.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:33:22.026Z,1516714402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:22.411Z,1516714402.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:22.426Z,1516714402.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:33:22.427Z,1516714402.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:22.807Z,1516714402.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:22.821Z,1516714402.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:33:22.822Z,1516714402.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:23.209Z,1516714403.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:23.224Z,1516714403.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:33:23.225Z,1516714403.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:23.606Z,1516714403.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:23.631Z,1516714403.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:24.007Z,1516714404.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:24.021Z,1516714404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:24.411Z,1516714404.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:24.426Z,1516714404.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:24.815Z,1516714404.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:24.830Z,1516714404.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:25.211Z,1516714405.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:25.232Z,1516714405.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:25.607Z,1516714405.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:25.622Z,1516714405.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:26.006Z,1516714406.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:26.025Z,1516714406.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:26.409Z,1516714406.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:26.424Z,1516714406.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:26.810Z,1516714406.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:26.825Z,1516714406.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:27.203Z,1516714407.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:27.235Z,1516714407.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:27.619Z,1516714407.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:27.634Z,1516714407.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:28.020Z,1516714408.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:28.034Z,1516714408.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:28.418Z,1516714408.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:28.441Z,1516714408.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:28.812Z,1516714408.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:28.827Z,1516714408.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:29.213Z,1516714409.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:29.228Z,1516714409.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:29.604Z,1516714409.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:29.629Z,1516714409.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:30.008Z,1516714410.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:30.023Z,1516714410.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:30.420Z,1516714410.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:30.435Z,1516714410.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:30.822Z,1516714410.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:30.841Z,1516714410.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:31.219Z,1516714411.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:31.240Z,1516714411.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:31.598Z,1516714411.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:31.625Z,1516714411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:32.012Z,1516714412.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:32.030Z,1516714412.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:32.400Z,1516714412.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:32.432Z,1516714412.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:32.814Z,1516714412.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:32.829Z,1516714412.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:33.200Z,1516714413.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:33.232Z,1516714413.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:33.623Z,1516714413.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:33.638Z,1516714413.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:34.019Z,1516714414.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:34.034Z,1516714414.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:34.416Z,1516714414.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:34.439Z,1516714414.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:34.800Z,1516714414.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:34.827Z,1516714414.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:35.198Z,1516714415.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:35.234Z,1516714415.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:35.601Z,1516714415.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:35.633Z,1516714415.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:36.000Z,1516714416.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:36.041Z,1516714416.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:36.420Z,1516714416.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:36.435Z,1516714416.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:36.820Z,1516714416.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:36.849Z,1516714416.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:37.223Z,1516714417.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:37.238Z,1516714417.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:37.601Z,1516714417.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:37.637Z,1516714417.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:38.004Z,1516714418.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:38.030Z,1516714418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:38.400Z,1516714418.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:38.437Z,1516714418.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:38.805Z,1516714418.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:38.838Z,1516714418.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:39.200Z,1516714419.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:39.236Z,1516714419.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:39.611Z,1516714419.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:39.645Z,1516714419.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:40.011Z,1516714420.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:40.049Z,1516714420.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:43.116Z,1516714423.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:43.149Z,1516714423.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:43.254Z,1516714423.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:43.293Z,1516714423.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:43.605Z,1516714423.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:43.620Z,1516714423.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:44.004Z,1516714424.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:44.025Z,1516714424.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:44.415Z,1516714424.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:44.430Z,1516714424.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:44.814Z,1516714424.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:44.837Z,1516714424.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:45.208Z,1516714425.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:45.229Z,1516714425.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:45.598Z,1516714425.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:45.629Z,1516714425.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:46.008Z,1516714426.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:46.028Z,1516714426.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:46.408Z,1516714426.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:46.443Z,1516714426.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:46.820Z,1516714426.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:46.841Z,1516714426.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:47.216Z,1516714427.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:47.237Z,1516714427.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:47.597Z,1516714427.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:47.627Z,1516714427.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:47.993Z,1516714427.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:48.025Z,1516714428.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:48.421Z,1516714428.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:48.436Z,1516714428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:48.813Z,1516714428.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:48.837Z,1516714428.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:49.217Z,1516714429.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:49.232Z,1516714429.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:49.595Z,1516714429.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:49.634Z,1516714429.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:49.998Z,1516714429.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:50.027Z,1516714430.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:50.407Z,1516714430.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:50.440Z,1516714430.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:50.811Z,1516714430.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:50.834Z,1516714430.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:51.204Z,1516714431.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:51.251Z,1516714431.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:51.598Z,1516714431.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:51.614Z,1516714431.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:52.000Z,1516714432.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:52.041Z,1516714432.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:52.412Z,1516714432.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:52.446Z,1516714432.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:52.816Z,1516714432.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:52.842Z,1516714432.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:53.216Z,1516714433.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:53.243Z,1516714433.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:53.605Z,1516714433.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:53.621Z,1516714433.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:53.999Z,1516714433.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:54.014Z,1516714434.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:54.407Z,1516714434.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:54.422Z,1516714434.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:54.807Z,1516714434.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:54.822Z,1516714434.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:55.206Z,1516714435.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:55.221Z,1516714435.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:55.606Z,1516714435.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:55.628Z,1516714435.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:56.000Z,1516714436.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:56.021Z,1516714436.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:56.406Z,1516714436.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:56.421Z,1516714436.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:56.807Z,1516714436.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:56.822Z,1516714436.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:57.206Z,1516714437.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:57.229Z,1516714437.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:57.601Z,1516714437.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:57.616Z,1516714437.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:57.996Z,1516714437.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:58.023Z,1516714438.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:58.410Z,1516714438.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:58.426Z,1516714438.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:58.813Z,1516714438.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:58.828Z,1516714438.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:59.212Z,1516714439.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:59.227Z,1516714439.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:59.597Z,1516714439.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:33:59.621Z,1516714439.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:33:59.000Z,1516714440.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:00.015Z,1516714440.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:00.410Z,1516714440.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:00.433Z,1516714440.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:00.813Z,1516714440.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:00.834Z,1516714440.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:01.212Z,1516714441.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:01.227Z,1516714441.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:01.593Z,1516714441.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:01.629Z,1516714441.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:01.992Z,1516714441.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:02.030Z,1516714442.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:02.403Z,1516714442.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:02.437Z,1516714442.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:02.817Z,1516714442.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:02.832Z,1516714442.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:03.203Z,1516714443.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:03.241Z,1516714443.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:03.597Z,1516714443.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:03.628Z,1516714443.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:03.993Z,1516714443.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:04.007Z,1516714444.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:04.407Z,1516714444.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:04.443Z,1516714444.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:04.811Z,1516714444.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:04.842Z,1516714444.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:05.207Z,1516714445.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:05.222Z,1516714445.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:05.602Z,1516714445.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:05.617Z,1516714445.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:05.999Z,1516714445.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:06.014Z,1516714446.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:06.404Z,1516714446.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:06.419Z,1516714446.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:06.807Z,1516714446.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:06.822Z,1516714446.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:07.215Z,1516714447.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:07.230Z,1516714447.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:07.600Z,1516714447.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:07.620Z,1516714447.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:08.000Z,1516714448.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:08.015Z,1516714448.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:08.405Z,1516714448.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:08.424Z,1516714448.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:08.807Z,1516714448.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:08.822Z,1516714448.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:09.206Z,1516714449.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:09.225Z,1516714449.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:09.601Z,1516714449.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:09.616Z,1516714449.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:09.000Z,1516714450.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:10.023Z,1516714450.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:10.410Z,1516714450.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:10.425Z,1516714450.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:10.809Z,1516714450.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:10.824Z,1516714450.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:11.211Z,1516714451.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:11.226Z,1516714451.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:11.597Z,1516714451.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:11.620Z,1516714451.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:12.000Z,1516714452.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:12.015Z,1516714452.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:12.411Z,1516714452.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:12.426Z,1516714452.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:12.810Z,1516714452.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:12.829Z,1516714452.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:13.209Z,1516714453.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:13.224Z,1516714453.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:13.601Z,1516714453.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:13.616Z,1516714453.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:13.996Z,1516714453.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:14.022Z,1516714454.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:14.404Z,1516714454.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:14.419Z,1516714454.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:14.810Z,1516714454.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:14.834Z,1516714454.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:15.217Z,1516714455.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:15.237Z,1516714455.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:15.618Z,1516714455.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:15.633Z,1516714455.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:15.997Z,1516714455.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:16.024Z,1516714456.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:16.393Z,1516714456.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:16.429Z,1516714456.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:16.797Z,1516714456.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:16.823Z,1516714456.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:17.193Z,1516714457.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:17.220Z,1516714457.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:17.603Z,1516714457.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:17.637Z,1516714457.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:18.015Z,1516714458.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:18.031Z,1516714458.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:18.403Z,1516714458.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:18.441Z,1516714458.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:18.796Z,1516714458.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:18.833Z,1516714458.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:19.192Z,1516714459.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:19.207Z,1516714459.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:19.593Z,1516714459.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:19.613Z,1516714459.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:20.001Z,1516714460.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:20.016Z,1516714460.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:20.397Z,1516714460.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:20.412Z,1516714460.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:20.811Z,1516714460.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:20.842Z,1516714460.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:21.215Z,1516714461.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:21.246Z,1516714461.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:21.614Z,1516714461.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:21.629Z,1516714461.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:22.002Z,1516714462.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:22.017Z,1516714462.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:22.400Z,1516714462.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:22.427Z,1516714462.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:22.805Z,1516714462.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:22.820Z,1516714462.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:23.201Z,1516714463.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:23.216Z,1516714463.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:23.611Z,1516714463.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:23.627Z,1516714463.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:24.014Z,1516714464.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:24.029Z,1516714464.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:24.412Z,1516714464.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:24.427Z,1516714464.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:24.800Z,1516714464.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:24.821Z,1516714464.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:25.201Z,1516714465.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:25.217Z,1516714465.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:25.596Z,1516714465.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:25.633Z,1516714465.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:26.006Z,1516714466.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:26.021Z,1516714466.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:26.392Z,1516714466.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:26.424Z,1516714466.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:26.812Z,1516714466.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:26.831Z,1516714466.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:27.214Z,1516714467.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:27.231Z,1516714467.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:27.613Z,1516714467.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:27.629Z,1516714467.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:28.015Z,1516714468.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:28.037Z,1516714468.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:28.394Z,1516714468.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:28.434Z,1516714468.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:28.795Z,1516714468.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:28.831Z,1516714468.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:29.194Z,1516714469.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:29.229Z,1516714469.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:29.618Z,1516714469.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:29.633Z,1516714469.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:30.018Z,1516714470.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:30.033Z,1516714470.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:30.047Z,1516714470.047 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:34:30.405Z,1516714470.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:30.442Z,1516714470.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:30.792Z,1516714470.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:30.832Z,1516714470.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:31.192Z,1516714471.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:31.219Z,1516714471.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:31.592Z,1516714471.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:31.633Z,1516714471.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:31.993Z,1516714471.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:32.009Z,1516714472.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:32.396Z,1516714472.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:32.411Z,1516714472.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:32.815Z,1516714472.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:32.844Z,1516714472.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:33.219Z,1516714473.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:33.253Z,1516714473.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:33.615Z,1516714473.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:33.648Z,1516714473.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:34.004Z,1516714474.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:34.019Z,1516714474.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:34.401Z,1516714474.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:34.417Z,1516714474.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:34.800Z,1516714474.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:34.815Z,1516714474.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:35.200Z,1516714475.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:35.217Z,1516714475.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:35.604Z,1516714475.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:35.619Z,1516714475.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:36.007Z,1516714476.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:36.022Z,1516714476.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:36.415Z,1516714476.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:36.429Z,1516714476.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:36.804Z,1516714476.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:36.820Z,1516714476.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:37.198Z,1516714477.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:37.221Z,1516714477.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:37.605Z,1516714477.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:37.620Z,1516714477.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:38.005Z,1516714478.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:38.020Z,1516714478.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:38.400Z,1516714478.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:38.415Z,1516714478.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:38.810Z,1516714478.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:38.825Z,1516714478.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:39.209Z,1516714479.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:39.229Z,1516714479.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:39.610Z,1516714479.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:39.625Z,1516714479.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:40.002Z,1516714480.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:40.020Z,1516714480.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:40.406Z,1516714480.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:40.421Z,1516714480.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:43.495Z,1516714483.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:43.510Z,1516714483.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:43.612Z,1516714483.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:43.633Z,1516714483.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:43.968Z,1516714483.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:43.983Z,1516714483.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:44.383Z,1516714484.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:44.407Z,1516714484.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:44.766Z,1516714484.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:44.781Z,1516714484.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:45.159Z,1516714485.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:45.200Z,1516714485.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:45.564Z,1516714485.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:45.579Z,1516714485.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:45.961Z,1516714485.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:45.989Z,1516714485.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:46.368Z,1516714486.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:46.383Z,1516714486.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:46.774Z,1516714486.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:46.789Z,1516714486.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:47.172Z,1516714487.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:47.186Z,1516714487.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:47.572Z,1516714487.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:47.587Z,1516714487.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:47.966Z,1516714487.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:47.980Z,1516714487.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:48.363Z,1516714488.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:48.378Z,1516714488.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:48.758Z,1516714488.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:48.781Z,1516714488.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:49.163Z,1516714489.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:49.178Z,1516714489.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:49.570Z,1516714489.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:49.585Z,1516714489.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:49.972Z,1516714489.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:49.993Z,1516714489.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:50.374Z,1516714490.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:50.388Z,1516714490.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:50.757Z,1516714490.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:50.784Z,1516714490.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:51.168Z,1516714491.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:51.189Z,1516714491.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:51.559Z,1516714491.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:51.589Z,1516714491.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:51.959Z,1516714491.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:51.983Z,1516714491.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:52.374Z,1516714492.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:52.389Z,1516714492.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:52.775Z,1516714492.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:52.790Z,1516714492.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:53.176Z,1516714493.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:53.196Z,1516714493.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:53.567Z,1516714493.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:53.603Z,1516714493.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:53.968Z,1516714493.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:53.982Z,1516714493.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:54.353Z,1516714494.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:54.381Z,1516714494.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:54.753Z,1516714494.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:54.797Z,1516714494.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:55.158Z,1516714495.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:55.179Z,1516714495.179 [PNI_TCM](ERROR): CRC does not match. Expected:0x27371 got:0x7618 2018-01-23T13:34:55.197Z,1516714495.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:55.568Z,1516714495.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:55.595Z,1516714495.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:55.973Z,1516714495.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:55.993Z,1516714495.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:56.362Z,1516714496.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:56.393Z,1516714496.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:56.750Z,1516714496.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:56.786Z,1516714496.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:57.155Z,1516714497.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:57.171Z,1516714497.171 [PNI_TCM](ERROR): CRC does not match. Expected:0x19627 got:0x3798 2018-01-23T13:34:57.189Z,1516714497.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:57.556Z,1516714497.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:57.592Z,1516714497.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:57.954Z,1516714497.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:57.989Z,1516714497.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:58.353Z,1516714498.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:58.385Z,1516714498.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:58.775Z,1516714498.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:58.796Z,1516714498.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:59.176Z,1516714499.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:59.191Z,1516714499.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:59.572Z,1516714499.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:59.595Z,1516714499.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:34:59.952Z,1516714499.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:34:59.989Z,1516714499.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:00.358Z,1516714500.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:00.393Z,1516714500.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:00.755Z,1516714500.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:00.782Z,1516714500.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:01.152Z,1516714501.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:01.189Z,1516714501.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:01.568Z,1516714501.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:01.598Z,1516714501.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:01.981Z,1516714501.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:01.996Z,1516714501.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:02.376Z,1516714502.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:02.408Z,1516714502.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:02.751Z,1516714502.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:02.795Z,1516714502.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:03.160Z,1516714503.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:03.197Z,1516714503.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:03.553Z,1516714503.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:03.590Z,1516714503.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:03.956Z,1516714503.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:03.964Z,1516714503.964 [PNI_TCM](ERROR): CRC does not match. Expected:0x32402 got:0x7618 2018-01-23T13:35:03.995Z,1516714503.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:04.354Z,1516714504.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:04.396Z,1516714504.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:04.763Z,1516714504.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:04.797Z,1516714504.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:05.181Z,1516714505.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:05.196Z,1516714505.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:05.566Z,1516714505.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:05.603Z,1516714505.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:05.952Z,1516714505.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:05.993Z,1516714505.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:06.352Z,1516714506.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:06.397Z,1516714506.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:06.762Z,1516714506.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:06.795Z,1516714506.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:07.167Z,1516714507.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:07.204Z,1516714507.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:07.563Z,1516714507.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:07.597Z,1516714507.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:07.976Z,1516714507.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:08.007Z,1516714508.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:08.369Z,1516714508.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:08.411Z,1516714508.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:08.755Z,1516714508.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:08.773Z,1516714508.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:09.164Z,1516714509.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:09.209Z,1516714509.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:09.564Z,1516714509.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:09.582Z,1516714509.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:09.961Z,1516714509.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:09.980Z,1516714509.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:10.363Z,1516714510.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:10.379Z,1516714510.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:10.763Z,1516714510.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:10.806Z,1516714510.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:11.180Z,1516714511.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:11.213Z,1516714511.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:11.563Z,1516714511.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:11.602Z,1516714511.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:11.961Z,1516714511.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:11.971Z,1516714511.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x41700 got:0x16909 2018-01-23T13:35:11.989Z,1516714511.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:12.366Z,1516714512.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:12.410Z,1516714512.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:12.760Z,1516714512.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:12.778Z,1516714512.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:13.161Z,1516714513.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:13.180Z,1516714513.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:13.567Z,1516714513.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:13.589Z,1516714513.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:13.971Z,1516714513.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:14.012Z,1516714514.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:14.370Z,1516714514.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:14.395Z,1516714514.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:14.758Z,1516714514.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:14.774Z,1516714514.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:15.156Z,1516714515.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:15.177Z,1516714515.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:15.561Z,1516714515.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:15.576Z,1516714515.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:15.960Z,1516714515.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:15.980Z,1516714515.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:16.356Z,1516714516.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:16.381Z,1516714516.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:16.773Z,1516714516.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:16.789Z,1516714516.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:17.174Z,1516714517.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:17.216Z,1516714517.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:17.570Z,1516714517.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:17.585Z,1516714517.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:17.962Z,1516714517.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:17.977Z,1516714517.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:18.356Z,1516714518.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:18.388Z,1516714518.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:18.759Z,1516714518.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:18.779Z,1516714518.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:19.161Z,1516714519.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:19.180Z,1516714519.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:19.570Z,1516714519.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:19.590Z,1516714519.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:19.975Z,1516714519.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:19.992Z,1516714519.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:20.372Z,1516714520.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:20.420Z,1516714520.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:20.765Z,1516714520.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:20.781Z,1516714520.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:21.155Z,1516714521.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:21.191Z,1516714521.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:21.571Z,1516714521.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:21.590Z,1516714521.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:21.971Z,1516714521.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:21.986Z,1516714521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:22.388Z,1516714522.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:22.422Z,1516714522.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:22.752Z,1516714522.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:22.780Z,1516714522.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:23.152Z,1516714523.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:23.192Z,1516714523.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:23.556Z,1516714523.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:23.582Z,1516714523.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:23.953Z,1516714523.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:23.981Z,1516714523.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:24.356Z,1516714524.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:24.382Z,1516714524.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:24.770Z,1516714524.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:24.800Z,1516714524.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:25.173Z,1516714525.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:25.202Z,1516714525.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:25.571Z,1516714525.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:25.586Z,1516714525.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:25.952Z,1516714525.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:25.978Z,1516714525.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:26.353Z,1516714526.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:26.394Z,1516714526.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:26.757Z,1516714526.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:26.784Z,1516714526.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:27.152Z,1516714527.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:27.178Z,1516714527.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:27.568Z,1516714527.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:27.591Z,1516714527.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:27.974Z,1516714527.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:27.994Z,1516714527.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:28.368Z,1516714528.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:28.389Z,1516714528.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:28.753Z,1516714528.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:28.789Z,1516714528.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:29.156Z,1516714529.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:29.188Z,1516714529.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:29.563Z,1516714529.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:29.602Z,1516714529.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:29.981Z,1516714529.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:29.996Z,1516714529.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:30.367Z,1516714530.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:30.394Z,1516714530.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:30.753Z,1516714530.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:30.768Z,1516714530.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:31.153Z,1516714531.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:31.173Z,1516714531.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:31.567Z,1516714531.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:31.603Z,1516714531.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:31.975Z,1516714531.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:31.998Z,1516714531.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:32.380Z,1516714532.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:32.410Z,1516714532.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:32.762Z,1516714532.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:32.777Z,1516714532.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:33.164Z,1516714533.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:33.185Z,1516714533.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:33.567Z,1516714533.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:33.583Z,1516714533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:33.967Z,1516714533.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:33.982Z,1516714533.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:34.366Z,1516714534.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:34.389Z,1516714534.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:34.760Z,1516714534.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:34.787Z,1516714534.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:35.161Z,1516714535.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:35.176Z,1516714535.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:35.566Z,1516714535.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:35.593Z,1516714535.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:35.975Z,1516714535.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:35.990Z,1516714535.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:36.375Z,1516714536.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:36.390Z,1516714536.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:36.761Z,1516714536.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:36.780Z,1516714536.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:37.162Z,1516714537.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:37.177Z,1516714537.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:37.570Z,1516714537.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:37.586Z,1516714537.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:37.972Z,1516714537.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:37.999Z,1516714537.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:38.377Z,1516714538.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:38.397Z,1516714538.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:38.753Z,1516714538.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:38.785Z,1516714538.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:39.152Z,1516714539.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:39.179Z,1516714539.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:39.182Z,1516714539.182 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:35:39.182Z,1516714539.182 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:35:39.182Z,1516714539.182 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:35:39.183Z,1516714539.183 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:35:39.568Z,1516714539.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:39.596Z,1516714539.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:39.603Z,1516714539.603 [Default:CheckIn:D] Stopped 2018-01-23T13:35:39.603Z,1516714539.603 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:35:39.976Z,1516714539.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:39.991Z,1516714539.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:39.995Z,1516714539.995 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 617.792318 min 2018-01-23T13:35:39.995Z,1516714539.995 [Default:CheckIn:E] Stopped 2018-01-23T13:35:39.995Z,1516714539.995 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:35:39.995Z,1516714539.995 [Default:CheckIn] Stopped 2018-01-23T13:35:39.995Z,1516714539.995 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:35:39.996Z,1516714539.996 [Default:CheckIn](INFO): Running loop #61 2018-01-23T13:35:39.996Z,1516714539.996 [Default:CheckIn] Running Loop=61 2018-01-23T13:35:39.996Z,1516714539.996 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:35:39.996Z,1516714539.996 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:35:40.377Z,1516714540.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:40.392Z,1516714540.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:40.754Z,1516714540.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:40.785Z,1516714540.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:43.850Z,1516714543.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:43.865Z,1516714543.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:43.979Z,1516714543.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:44.030Z,1516714544.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:44.347Z,1516714544.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:44.363Z,1516714544.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:44.760Z,1516714544.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:44.793Z,1516714544.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:45.137Z,1516714545.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:45.156Z,1516714545.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:45.540Z,1516714545.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:45.555Z,1516714545.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:45.942Z,1516714545.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:45.957Z,1516714545.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:46.340Z,1516714546.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:46.361Z,1516714546.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:46.745Z,1516714546.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:46.765Z,1516714546.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:47.151Z,1516714547.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:47.166Z,1516714547.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:47.551Z,1516714547.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:47.566Z,1516714547.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:47.936Z,1516714547.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:47.958Z,1516714547.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:48.341Z,1516714548.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:48.355Z,1516714548.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:48.736Z,1516714548.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:48.756Z,1516714548.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:49.148Z,1516714549.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:49.163Z,1516714549.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:49.541Z,1516714549.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:49.556Z,1516714549.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:49.950Z,1516714549.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:49.965Z,1516714549.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:50.348Z,1516714550.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:50.369Z,1516714550.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:50.751Z,1516714550.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:50.772Z,1516714550.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:51.137Z,1516714551.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:51.156Z,1516714551.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:51.536Z,1516714551.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:51.554Z,1516714551.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:51.933Z,1516714551.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:51.966Z,1516714551.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:52.345Z,1516714552.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:52.365Z,1516714552.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:52.748Z,1516714552.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:52.775Z,1516714552.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:53.159Z,1516714553.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:53.174Z,1516714553.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:53.547Z,1516714553.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:53.569Z,1516714553.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:53.932Z,1516714553.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:53.965Z,1516714553.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:54.332Z,1516714554.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:54.370Z,1516714554.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:54.730Z,1516714554.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:54.753Z,1516714554.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:55.133Z,1516714555.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:55.164Z,1516714555.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:55.532Z,1516714555.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:55.577Z,1516714555.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:55.947Z,1516714555.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:55.973Z,1516714555.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:56.347Z,1516714556.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:56.381Z,1516714556.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:56.743Z,1516714556.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:56.771Z,1516714556.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:57.130Z,1516714557.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:57.145Z,1516714557.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:57.533Z,1516714557.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:57.548Z,1516714557.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:57.937Z,1516714557.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:57.952Z,1516714557.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:58.337Z,1516714558.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:58.357Z,1516714558.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:58.748Z,1516714558.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:58.762Z,1516714558.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:59.147Z,1516714559.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:59.162Z,1516714559.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:59.543Z,1516714559.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:59.558Z,1516714559.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:35:59.938Z,1516714559.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:35:59.965Z,1516714559.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:00.341Z,1516714560.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:00.355Z,1516714560.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:00.736Z,1516714560.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:00.758Z,1516714560.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:01.136Z,1516714561.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:01.163Z,1516714561.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:01.541Z,1516714561.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:01.556Z,1516714561.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:01.951Z,1516714561.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:01.966Z,1516714561.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:02.356Z,1516714562.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:02.403Z,1516714562.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:02.754Z,1516714562.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:02.792Z,1516714562.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:03.138Z,1516714563.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:03.187Z,1516714563.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:03.189Z,1516714563.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:03.189Z,1516714563.189 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206 2018-01-23T13:36:03.190Z,1516714563.190 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:36:03.247Z,1516714563.247 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:36:03.546Z,1516714563.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:03.589Z,1516714563.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:03.626Z,1516714563.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:36:03.635Z,1516714563.635 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206 2018-01-23T13:36:03.955Z,1516714563.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:04.009Z,1516714564.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:04.010Z,1516714564.010 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:36:04.011Z,1516714564.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:36:04.011Z,1516714564.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:36:04.342Z,1516714564.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:04.366Z,1516714564.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:04.366Z,1516714564.366 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206 2018-01-23T13:36:04.366Z,1516714564.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:36:04.372Z,1516714564.372 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:04.372Z,1516714564.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 206 2018-01-23T13:36:04.372Z,1516714564.372 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:36:04.414Z,1516714564.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:36:04.414Z,1516714564.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:36:04.754Z,1516714564.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:04.800Z,1516714564.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:36:04.800Z,1516714564.800 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206 2018-01-23T13:36:04.800Z,1516714564.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:36:04.800Z,1516714564.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 206 2018-01-23T13:36:05.156Z,1516714565.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:05.169Z,1516714565.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:36:05.170Z,1516714565.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:36:05.170Z,1516714565.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:36:05.170Z,1516714565.170 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:36:05.171Z,1516714565.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:36:05.171Z,1516714565.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:36:05.548Z,1516714565.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:05.577Z,1516714565.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:36:05.578Z,1516714565.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:05.932Z,1516714565.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:05.958Z,1516714565.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:36:05.959Z,1516714565.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:06.333Z,1516714566.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:06.374Z,1516714566.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:36:06.375Z,1516714566.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:06.730Z,1516714566.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:06.757Z,1516714566.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:36:06.758Z,1516714566.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:07.141Z,1516714567.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:07.167Z,1516714567.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:36:07.168Z,1516714567.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:07.533Z,1516714567.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:07.564Z,1516714567.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:36:07.565Z,1516714567.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:07.945Z,1516714567.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:07.979Z,1516714567.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:36:07.980Z,1516714567.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:08.357Z,1516714568.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:08.393Z,1516714568.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:36:08.394Z,1516714568.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:08.754Z,1516714568.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:08.808Z,1516714568.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:36:08.809Z,1516714568.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:09.134Z,1516714569.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:09.169Z,1516714569.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:36:09.170Z,1516714569.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:09.536Z,1516714569.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:09.588Z,1516714569.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:36:09.589Z,1516714569.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:09.939Z,1516714569.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:09.973Z,1516714569.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:36:09.974Z,1516714569.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:10.338Z,1516714570.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:10.372Z,1516714570.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:36:10.373Z,1516714570.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:10.773Z,1516714570.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:10.797Z,1516714570.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:36:10.798Z,1516714570.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:11.147Z,1516714571.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:11.184Z,1516714571.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:36:11.185Z,1516714571.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:11.544Z,1516714571.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:11.558Z,1516714571.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:36:11.559Z,1516714571.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:11.940Z,1516714571.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:11.988Z,1516714571.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:36:11.988Z,1516714571.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:12.336Z,1516714572.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:12.368Z,1516714572.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:36:12.369Z,1516714572.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:12.741Z,1516714572.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:12.760Z,1516714572.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:36:12.761Z,1516714572.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:13.136Z,1516714573.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:13.168Z,1516714573.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:36:13.169Z,1516714573.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:13.542Z,1516714573.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:13.556Z,1516714573.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:36:13.557Z,1516714573.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:13.958Z,1516714573.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:13.977Z,1516714573.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:36:13.978Z,1516714573.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:14.376Z,1516714574.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:14.421Z,1516714574.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T13:36:14.421Z,1516714574.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:14.749Z,1516714574.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:14.789Z,1516714574.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:36:14.790Z,1516714574.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:15.141Z,1516714575.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:15.185Z,1516714575.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:36:15.186Z,1516714575.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:15.548Z,1516714575.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:15.566Z,1516714575.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:36:15.572Z,1516714575.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:15.950Z,1516714575.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:15.982Z,1516714575.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:36:16.007Z,1516714576.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:16.334Z,1516714576.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:16.411Z,1516714576.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:36:16.412Z,1516714576.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:16.764Z,1516714576.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:16.806Z,1516714576.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:36:16.816Z,1516714576.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:17.164Z,1516714577.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:17.189Z,1516714577.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:36:17.189Z,1516714577.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:17.546Z,1516714577.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:17.566Z,1516714577.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:36:17.591Z,1516714577.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:17.947Z,1516714577.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:18.001Z,1516714578.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:36:18.002Z,1516714578.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:18.344Z,1516714578.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:18.362Z,1516714578.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:36:18.371Z,1516714578.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:18.734Z,1516714578.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:18.780Z,1516714578.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:36:18.781Z,1516714578.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:19.146Z,1516714579.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:19.169Z,1516714579.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:36:19.170Z,1516714579.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:19.534Z,1516714579.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:19.577Z,1516714579.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:36:19.578Z,1516714579.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:19.945Z,1516714579.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:19.982Z,1516714579.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:36:19.988Z,1516714579.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:20.364Z,1516714580.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:20.391Z,1516714580.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:36:20.392Z,1516714580.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:20.749Z,1516714580.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:20.791Z,1516714580.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:36:20.792Z,1516714580.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:21.139Z,1516714581.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:21.158Z,1516714581.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:36:21.183Z,1516714581.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:21.548Z,1516714581.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:21.591Z,1516714581.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:36:21.592Z,1516714581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:21.943Z,1516714581.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:21.987Z,1516714581.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:36:21.988Z,1516714581.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:22.343Z,1516714582.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:22.362Z,1516714582.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:36:22.367Z,1516714582.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:22.757Z,1516714582.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:22.805Z,1516714582.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:36:22.806Z,1516714582.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:23.158Z,1516714583.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:23.208Z,1516714583.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:36:23.209Z,1516714583.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:23.554Z,1516714583.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:23.569Z,1516714583.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:36:23.570Z,1516714583.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:23.938Z,1516714583.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:23.972Z,1516714583.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:36:23.973Z,1516714583.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:24.334Z,1516714584.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:24.370Z,1516714584.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:24.734Z,1516714584.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:24.776Z,1516714584.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:25.166Z,1516714585.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:25.193Z,1516714585.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:25.538Z,1516714585.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:25.587Z,1516714585.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:25.949Z,1516714585.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:25.986Z,1516714585.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:26.355Z,1516714586.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:26.396Z,1516714586.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:26.751Z,1516714586.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:26.778Z,1516714586.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:27.141Z,1516714587.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:27.156Z,1516714587.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:27.537Z,1516714587.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:27.552Z,1516714587.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:27.938Z,1516714587.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:27.953Z,1516714587.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:28.338Z,1516714588.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:28.357Z,1516714588.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:28.747Z,1516714588.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:28.762Z,1516714588.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:29.151Z,1516714589.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:29.184Z,1516714589.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:29.555Z,1516714589.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:29.586Z,1516714589.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:29.937Z,1516714589.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:29.952Z,1516714589.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:30.340Z,1516714590.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:30.360Z,1516714590.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:30.741Z,1516714590.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:30.756Z,1516714590.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:31.140Z,1516714591.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:31.154Z,1516714591.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:31.540Z,1516714591.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:31.555Z,1516714591.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:31.944Z,1516714591.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:31.959Z,1516714591.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:32.376Z,1516714592.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:32.390Z,1516714592.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:32.743Z,1516714592.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:32.764Z,1516714592.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:33.141Z,1516714593.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:33.156Z,1516714593.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:33.538Z,1516714593.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:33.565Z,1516714593.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:33.946Z,1516714593.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:33.960Z,1516714593.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:34.340Z,1516714594.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:34.355Z,1516714594.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:34.748Z,1516714594.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:34.775Z,1516714594.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:35.154Z,1516714595.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:35.176Z,1516714595.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:35.554Z,1516714595.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:35.569Z,1516714595.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:35.944Z,1516714595.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:35.965Z,1516714595.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:36.339Z,1516714596.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:36.365Z,1516714596.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:36.740Z,1516714596.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:36.759Z,1516714596.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:37.135Z,1516714597.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:37.168Z,1516714597.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:37.540Z,1516714597.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:37.564Z,1516714597.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:37.954Z,1516714597.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:37.969Z,1516714597.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:38.354Z,1516714598.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:38.373Z,1516714598.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:38.755Z,1516714598.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:38.776Z,1516714598.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:39.142Z,1516714599.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:39.157Z,1516714599.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:39.536Z,1516714599.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:39.558Z,1516714599.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:39.941Z,1516714599.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:39.960Z,1516714599.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:40.336Z,1516714600.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:40.358Z,1516714600.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:40.750Z,1516714600.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:40.765Z,1516714600.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:41.154Z,1516714601.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:41.176Z,1516714601.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:44.256Z,1516714604.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:44.271Z,1516714604.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:44.377Z,1516714604.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:44.409Z,1516714604.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:44.732Z,1516714604.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:44.768Z,1516714604.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:45.151Z,1516714605.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:45.166Z,1516714605.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:45.530Z,1516714605.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:45.561Z,1516714605.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:45.955Z,1516714605.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:45.970Z,1516714605.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:46.362Z,1516714606.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:46.377Z,1516714606.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:46.751Z,1516714606.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:46.766Z,1516714606.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:47.133Z,1516714607.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:47.165Z,1516714607.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:47.533Z,1516714607.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:47.569Z,1516714607.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:47.937Z,1516714607.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:47.964Z,1516714607.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:48.332Z,1516714608.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:48.369Z,1516714608.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:48.747Z,1516714608.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:48.779Z,1516714608.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:49.147Z,1516714609.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:49.169Z,1516714609.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:49.547Z,1516714609.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:49.570Z,1516714609.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:49.933Z,1516714609.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:49.960Z,1516714609.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:50.332Z,1516714610.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:50.369Z,1516714610.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:50.732Z,1516714610.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:50.768Z,1516714610.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:51.134Z,1516714611.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:51.161Z,1516714611.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:51.536Z,1516714611.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:51.572Z,1516714611.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:51.943Z,1516714611.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:51.969Z,1516714611.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:52.347Z,1516714612.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:52.384Z,1516714612.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:52.743Z,1516714612.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:52.770Z,1516714612.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:53.140Z,1516714613.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:53.173Z,1516714613.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:53.533Z,1516714613.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:53.548Z,1516714613.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:53.934Z,1516714613.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:53.949Z,1516714613.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:54.344Z,1516714614.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:54.371Z,1516714614.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:54.751Z,1516714614.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:54.787Z,1516714614.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:55.152Z,1516714615.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:55.184Z,1516714615.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:55.548Z,1516714615.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:55.563Z,1516714615.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:55.948Z,1516714615.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:55.969Z,1516714615.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:56.346Z,1516714616.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:56.361Z,1516714616.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:56.742Z,1516714616.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:56.758Z,1516714616.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:57.140Z,1516714617.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:57.167Z,1516714617.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:57.541Z,1516714617.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:57.558Z,1516714617.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:57.952Z,1516714617.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:57.969Z,1516714617.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:58.351Z,1516714618.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:58.367Z,1516714618.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:58.750Z,1516714618.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:58.766Z,1516714618.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:59.137Z,1516714619.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:59.161Z,1516714619.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:59.540Z,1516714619.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:59.563Z,1516714619.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:36:59.947Z,1516714619.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:36:59.962Z,1516714619.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:00.335Z,1516714620.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:00.373Z,1516714620.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:00.757Z,1516714620.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:00.772Z,1516714620.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:01.156Z,1516714621.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:01.177Z,1516714621.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:01.551Z,1516714621.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:01.573Z,1516714621.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:01.932Z,1516714621.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:01.962Z,1516714621.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:02.333Z,1516714622.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:02.365Z,1516714622.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:02.731Z,1516714622.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:02.765Z,1516714622.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:03.133Z,1516714623.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:03.173Z,1516714623.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:03.532Z,1516714623.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:03.558Z,1516714623.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:03.951Z,1516714623.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:03.966Z,1516714623.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:04.356Z,1516714624.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:04.376Z,1516714624.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:04.751Z,1516714624.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:04.766Z,1516714624.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:05.132Z,1516714625.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:05.158Z,1516714625.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:05.538Z,1516714625.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:05.564Z,1516714625.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:05.937Z,1516714625.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:05.963Z,1516714625.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:06.332Z,1516714626.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:06.365Z,1516714626.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:06.750Z,1516714626.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:06.773Z,1516714626.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:07.159Z,1516714627.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:07.174Z,1516714627.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:07.548Z,1516714627.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:07.570Z,1516714627.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:07.932Z,1516714627.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:07.968Z,1516714627.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:08.333Z,1516714628.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:08.358Z,1516714628.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:08.732Z,1516714628.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:08.764Z,1516714628.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:09.133Z,1516714629.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:09.161Z,1516714629.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:09.533Z,1516714629.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:09.558Z,1516714629.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:09.950Z,1516714629.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:09.973Z,1516714629.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:10.355Z,1516714630.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:10.370Z,1516714630.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:10.755Z,1516714630.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:10.770Z,1516714630.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:11.132Z,1516714631.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:11.165Z,1516714631.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:11.532Z,1516714631.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:11.561Z,1516714631.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:11.933Z,1516714631.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:11.965Z,1516714631.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:12.333Z,1516714632.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:12.359Z,1516714632.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:12.750Z,1516714632.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:12.765Z,1516714632.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:13.155Z,1516714633.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:13.170Z,1516714633.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:13.548Z,1516714633.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:13.577Z,1516714633.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:13.932Z,1516714633.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:13.967Z,1516714633.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:14.332Z,1516714634.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:14.358Z,1516714634.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:14.732Z,1516714634.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:14.765Z,1516714634.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:15.150Z,1516714635.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:15.164Z,1516714635.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:15.537Z,1516714635.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:15.563Z,1516714635.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:15.948Z,1516714635.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:15.978Z,1516714635.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:16.355Z,1516714636.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:16.370Z,1516714636.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:16.751Z,1516714636.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:16.773Z,1516714636.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:17.131Z,1516714637.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:17.157Z,1516714637.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:17.532Z,1516714637.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:17.568Z,1516714637.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:17.934Z,1516714637.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:17.960Z,1516714637.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:18.332Z,1516714638.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:18.365Z,1516714638.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:18.750Z,1516714638.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:18.765Z,1516714638.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:19.159Z,1516714639.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:19.174Z,1516714639.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:19.551Z,1516714639.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:19.566Z,1516714639.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:19.933Z,1516714639.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:19.972Z,1516714639.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:20.336Z,1516714640.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:20.363Z,1516714640.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:20.748Z,1516714640.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:20.778Z,1516714640.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:21.155Z,1516714641.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:21.170Z,1516714641.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:21.551Z,1516714641.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:21.566Z,1516714641.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:21.933Z,1516714641.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:21.965Z,1516714641.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:22.333Z,1516714642.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:22.366Z,1516714642.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:22.749Z,1516714642.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:22.769Z,1516714642.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:23.152Z,1516714643.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:23.179Z,1516714643.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:23.553Z,1516714643.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:23.567Z,1516714643.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:23.937Z,1516714643.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:23.964Z,1516714643.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:24.332Z,1516714644.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:24.368Z,1516714644.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:24.764Z,1516714644.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:24.779Z,1516714644.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:25.153Z,1516714645.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:25.173Z,1516714645.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:25.551Z,1516714645.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:25.566Z,1516714645.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:25.933Z,1516714645.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:25.966Z,1516714645.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:26.336Z,1516714646.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:26.362Z,1516714646.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:26.747Z,1516714646.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:26.769Z,1516714646.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:27.156Z,1516714647.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:27.170Z,1516714647.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:27.551Z,1516714647.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:27.566Z,1516714647.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:27.933Z,1516714647.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:27.964Z,1516714647.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:28.332Z,1516714648.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:28.366Z,1516714648.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:28.751Z,1516714648.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:28.766Z,1516714648.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:29.154Z,1516714649.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:29.177Z,1516714649.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:29.553Z,1516714649.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:29.567Z,1516714649.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:29.933Z,1516714649.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:29.965Z,1516714649.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:30.332Z,1516714650.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:30.365Z,1516714650.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:30.753Z,1516714650.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:30.767Z,1516714650.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:31.153Z,1516714651.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:31.174Z,1516714651.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:31.547Z,1516714651.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:31.578Z,1516714651.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:31.937Z,1516714651.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:31.965Z,1516714651.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:32.334Z,1516714652.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:32.369Z,1516714652.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:32.747Z,1516714652.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:32.770Z,1516714652.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:33.157Z,1516714653.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:33.171Z,1516714653.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:33.560Z,1516714653.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:33.581Z,1516714653.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:33.939Z,1516714653.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:33.966Z,1516714653.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:34.333Z,1516714654.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:34.371Z,1516714654.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:34.754Z,1516714654.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:34.773Z,1516714654.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:35.150Z,1516714655.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:35.184Z,1516714655.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:35.555Z,1516714655.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:35.570Z,1516714655.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:35.933Z,1516714655.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:35.965Z,1516714655.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:36.340Z,1516714656.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:36.376Z,1516714656.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:36.742Z,1516714656.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:36.782Z,1516714656.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:37.155Z,1516714657.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:37.186Z,1516714657.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:37.556Z,1516714657.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:37.572Z,1516714657.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:37.934Z,1516714657.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:37.977Z,1516714657.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:38.337Z,1516714658.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:38.369Z,1516714658.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:38.744Z,1516714658.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:38.778Z,1516714658.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:39.158Z,1516714659.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:39.173Z,1516714659.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:39.543Z,1516714659.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:39.581Z,1516714659.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:39.937Z,1516714659.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:39.968Z,1516714659.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:40.331Z,1516714660.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:40.346Z,1516714660.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:40.751Z,1516714660.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:40.774Z,1516714660.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:41.166Z,1516714661.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:41.181Z,1516714661.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:41.555Z,1516714661.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:41.588Z,1516714661.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:44.637Z,1516714664.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:44.652Z,1516714664.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:44.749Z,1516714664.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:44.785Z,1516714664.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:45.134Z,1516714665.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:45.153Z,1516714665.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:45.535Z,1516714665.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:45.550Z,1516714665.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:45.935Z,1516714665.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:45.950Z,1516714665.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:46.321Z,1516714666.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:46.348Z,1516714666.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:46.723Z,1516714666.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:46.749Z,1516714666.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:47.124Z,1516714667.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:47.144Z,1516714667.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:47.523Z,1516714667.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:47.542Z,1516714667.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:47.936Z,1516714667.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:47.950Z,1516714667.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:48.338Z,1516714668.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:48.353Z,1516714668.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:48.735Z,1516714668.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:48.749Z,1516714668.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:49.126Z,1516714669.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:49.148Z,1516714669.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:49.529Z,1516714669.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:49.549Z,1516714669.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:49.921Z,1516714669.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:49.943Z,1516714669.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:50.326Z,1516714670.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:50.341Z,1516714670.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:50.721Z,1516714670.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:50.743Z,1516714670.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:51.134Z,1516714671.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:51.149Z,1516714671.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:51.538Z,1516714671.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:51.553Z,1516714671.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:51.935Z,1516714671.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:51.949Z,1516714671.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:52.321Z,1516714672.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:52.343Z,1516714672.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:52.725Z,1516714672.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:52.744Z,1516714672.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:53.124Z,1516714673.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:53.144Z,1516714673.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:53.531Z,1516714673.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:53.546Z,1516714673.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:53.935Z,1516714673.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:53.950Z,1516714673.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:54.338Z,1516714674.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:54.357Z,1516714674.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:54.735Z,1516714674.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:54.750Z,1516714674.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:55.125Z,1516714675.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:55.140Z,1516714675.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:55.529Z,1516714675.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:55.544Z,1516714675.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:55.921Z,1516714675.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:55.943Z,1516714675.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:56.325Z,1516714676.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:56.344Z,1516714676.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:56.729Z,1516714676.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:56.744Z,1516714676.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:57.134Z,1516714677.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:57.149Z,1516714677.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:57.538Z,1516714677.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:57.553Z,1516714677.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:57.934Z,1516714677.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:57.949Z,1516714677.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:58.324Z,1516714678.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:58.345Z,1516714678.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:58.725Z,1516714678.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:58.740Z,1516714678.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:59.124Z,1516714679.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:59.144Z,1516714679.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:59.519Z,1516714679.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:59.551Z,1516714679.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:37:59.939Z,1516714679.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:37:59.954Z,1516714679.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:00.337Z,1516714680.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:00.357Z,1516714680.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:00.738Z,1516714680.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:00.761Z,1516714680.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:01.125Z,1516714681.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:01.140Z,1516714681.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:01.525Z,1516714681.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:01.545Z,1516714681.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:01.919Z,1516714681.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:01.942Z,1516714681.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:02.325Z,1516714682.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:02.344Z,1516714682.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:02.732Z,1516714682.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:02.753Z,1516714682.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:03.138Z,1516714683.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:03.153Z,1516714683.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:03.538Z,1516714683.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:03.553Z,1516714683.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:03.935Z,1516714683.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:03.949Z,1516714683.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:04.321Z,1516714684.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:04.342Z,1516714684.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:04.726Z,1516714684.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:04.749Z,1516714684.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:05.130Z,1516714685.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:05.153Z,1516714685.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:05.517Z,1516714685.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:05.552Z,1516714685.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:05.933Z,1516714685.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:05.954Z,1516714685.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:06.338Z,1516714686.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:06.353Z,1516714686.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:06.736Z,1516714686.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:06.750Z,1516714686.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:07.134Z,1516714687.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:07.148Z,1516714687.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:07.533Z,1516714687.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:07.553Z,1516714687.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:07.917Z,1516714687.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:07.949Z,1516714687.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:08.331Z,1516714688.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:08.346Z,1516714688.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:08.730Z,1516714688.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:08.745Z,1516714688.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:09.132Z,1516714689.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:09.159Z,1516714689.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:09.543Z,1516714689.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:09.558Z,1516714689.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:09.940Z,1516714689.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:09.955Z,1516714689.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:10.317Z,1516714690.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:10.345Z,1516714690.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:10.720Z,1516714690.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:10.766Z,1516714690.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:11.122Z,1516714691.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:11.149Z,1516714691.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:11.517Z,1516714691.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:11.550Z,1516714691.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:11.927Z,1516714691.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:11.942Z,1516714691.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:12.332Z,1516714692.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:12.361Z,1516714692.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:12.739Z,1516714692.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:12.766Z,1516714692.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:13.127Z,1516714693.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:13.142Z,1516714693.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:13.525Z,1516714693.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:13.552Z,1516714693.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:13.930Z,1516714693.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:13.945Z,1516714693.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:14.329Z,1516714694.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:14.343Z,1516714694.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:14.720Z,1516714694.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:14.742Z,1516714694.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:15.131Z,1516714695.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:15.153Z,1516714695.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:15.536Z,1516714695.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:15.552Z,1516714695.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:15.935Z,1516714695.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:15.950Z,1516714695.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:16.321Z,1516714696.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:16.353Z,1516714696.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:16.725Z,1516714696.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:16.741Z,1516714696.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:17.124Z,1516714697.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:17.151Z,1516714697.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:17.519Z,1516714697.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:17.543Z,1516714697.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:17.936Z,1516714697.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:17.951Z,1516714697.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:18.339Z,1516714698.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:18.361Z,1516714698.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:18.735Z,1516714698.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:18.751Z,1516714698.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:19.117Z,1516714699.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:19.144Z,1516714699.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:19.514Z,1516714699.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:19.549Z,1516714699.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:19.917Z,1516714699.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:19.948Z,1516714699.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:20.330Z,1516714700.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:20.344Z,1516714700.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:20.714Z,1516714700.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:20.748Z,1516714700.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:21.135Z,1516714701.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:21.150Z,1516714701.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:21.542Z,1516714701.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:21.557Z,1516714701.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:21.932Z,1516714701.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:21.955Z,1516714701.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:22.317Z,1516714702.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:22.343Z,1516714702.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:22.717Z,1516714702.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:22.752Z,1516714702.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:23.134Z,1516714703.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:23.149Z,1516714703.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:23.517Z,1516714703.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:23.542Z,1516714703.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:23.934Z,1516714703.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:23.957Z,1516714703.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:24.343Z,1516714704.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:24.358Z,1516714704.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:24.742Z,1516714704.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:24.757Z,1516714704.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:25.117Z,1516714705.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:25.145Z,1516714705.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:25.514Z,1516714705.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:25.541Z,1516714705.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:25.921Z,1516714705.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:25.947Z,1516714705.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:26.321Z,1516714706.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:26.349Z,1516714706.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:26.714Z,1516714706.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:26.737Z,1516714706.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:27.127Z,1516714707.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:27.161Z,1516714707.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:27.544Z,1516714707.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:27.559Z,1516714707.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:27.939Z,1516714707.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:27.954Z,1516714707.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:28.325Z,1516714708.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:28.350Z,1516714708.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:28.717Z,1516714708.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:28.754Z,1516714708.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:29.121Z,1516714709.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:29.152Z,1516714709.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:29.519Z,1516714709.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:29.546Z,1516714709.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:29.945Z,1516714709.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:29.960Z,1516714709.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:30.344Z,1516714710.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:30.359Z,1516714710.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:30.727Z,1516714710.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:30.753Z,1516714710.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:31.119Z,1516714711.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:31.171Z,1516714711.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:31.521Z,1516714711.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:31.544Z,1516714711.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:31.917Z,1516714711.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:31.937Z,1516714711.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:32.325Z,1516714712.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:32.340Z,1516714712.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:32.718Z,1516714712.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:32.733Z,1516714712.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:33.139Z,1516714713.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:33.169Z,1516714713.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:33.539Z,1516714713.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:33.563Z,1516714713.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:33.931Z,1516714713.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:33.963Z,1516714713.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:34.330Z,1516714714.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:34.345Z,1516714714.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:34.725Z,1516714714.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:34.739Z,1516714714.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:35.126Z,1516714715.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:35.141Z,1516714715.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:35.521Z,1516714715.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:35.544Z,1516714715.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:35.936Z,1516714715.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:35.956Z,1516714715.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:36.334Z,1516714716.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:36.353Z,1516714716.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:36.736Z,1516714716.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:36.750Z,1516714716.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:37.125Z,1516714717.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:37.140Z,1516714717.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:37.520Z,1516714717.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:37.543Z,1516714717.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:37.922Z,1516714717.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:37.953Z,1516714717.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:38.333Z,1516714718.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:38.347Z,1516714718.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:38.721Z,1516714718.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:38.741Z,1516714718.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:39.131Z,1516714719.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:39.154Z,1516714719.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:39.538Z,1516714719.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:39.553Z,1516714719.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:39.938Z,1516714719.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:39.961Z,1516714719.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:40.333Z,1516714720.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:40.348Z,1516714720.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:40.728Z,1516714720.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:40.743Z,1516714720.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:41.126Z,1516714721.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:41.146Z,1516714721.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:41.536Z,1516714721.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:41.551Z,1516714721.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:41.939Z,1516714721.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:41.954Z,1516714721.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:45.037Z,1516714725.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:45.052Z,1516714725.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:45.159Z,1516714725.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:45.192Z,1516714725.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:45.504Z,1516714725.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:45.545Z,1516714725.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:45.905Z,1516714725.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:45.941Z,1516714725.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:46.302Z,1516714726.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:46.336Z,1516714726.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:46.701Z,1516714726.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:46.717Z,1516714726.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:47.107Z,1516714727.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:47.152Z,1516714727.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:47.512Z,1516714727.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:47.546Z,1516714727.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:47.908Z,1516714727.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:47.925Z,1516714727.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:48.306Z,1516714728.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:48.321Z,1516714728.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:48.702Z,1516714728.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:48.746Z,1516714728.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:49.100Z,1516714729.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:49.126Z,1516714729.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:49.508Z,1516714729.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:49.526Z,1516714729.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:49.910Z,1516714729.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:49.926Z,1516714729.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:50.308Z,1516714730.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:50.349Z,1516714730.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:50.709Z,1516714730.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:50.729Z,1516714730.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:51.098Z,1516714731.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:51.119Z,1516714731.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:51.496Z,1516714731.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:51.533Z,1516714731.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:51.908Z,1516714731.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:51.923Z,1516714731.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:52.307Z,1516714732.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:52.325Z,1516714732.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:52.699Z,1516714732.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:52.727Z,1516714732.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:53.114Z,1516714733.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:53.130Z,1516714733.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:53.508Z,1516714733.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:53.534Z,1516714733.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:53.910Z,1516714733.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:53.936Z,1516714733.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:54.305Z,1516714734.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:54.325Z,1516714734.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:54.690Z,1516714734.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:54.728Z,1516714734.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:55.097Z,1516714735.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:55.120Z,1516714735.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:55.501Z,1516714735.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:55.516Z,1516714735.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:55.910Z,1516714735.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:55.930Z,1516714735.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:56.317Z,1516714736.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:56.332Z,1516714736.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:56.712Z,1516714736.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:56.739Z,1516714736.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:57.092Z,1516714737.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:57.119Z,1516714737.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:57.492Z,1516714737.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:57.529Z,1516714737.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:57.892Z,1516714737.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:57.931Z,1516714737.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:58.293Z,1516714738.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:58.324Z,1516714738.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:58.692Z,1516714738.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:58.718Z,1516714738.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:59.110Z,1516714739.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:59.139Z,1516714739.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:59.516Z,1516714739.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:59.537Z,1516714739.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:38:59.911Z,1516714739.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:38:59.947Z,1516714739.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:00.293Z,1516714740.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:00.326Z,1516714740.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:00.690Z,1516714740.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:00.713Z,1516714740.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:01.093Z,1516714741.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:01.121Z,1516714741.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:01.492Z,1516714741.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:01.507Z,1516714741.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:01.903Z,1516714741.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:01.934Z,1516714741.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:02.315Z,1516714742.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:02.343Z,1516714742.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:02.715Z,1516714742.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:02.745Z,1516714742.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:03.093Z,1516714743.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:03.135Z,1516714743.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:03.508Z,1516714743.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:03.543Z,1516714743.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:03.904Z,1516714743.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:03.947Z,1516714743.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:04.301Z,1516714744.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:04.316Z,1516714744.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:04.335Z,1516714744.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:04.335Z,1516714744.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207 2018-01-23T13:39:04.335Z,1516714744.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:39:04.359Z,1516714744.359 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:39:04.697Z,1516714744.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:04.720Z,1516714744.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:04.744Z,1516714744.744 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:39:04.744Z,1516714744.744 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207 2018-01-23T13:39:05.103Z,1516714745.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:05.118Z,1516714745.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:05.119Z,1516714745.119 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:39:05.120Z,1516714745.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:39:05.120Z,1516714745.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:39:05.503Z,1516714745.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:05.518Z,1516714745.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:05.518Z,1516714745.518 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207 2018-01-23T13:39:05.518Z,1516714745.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:39:05.520Z,1516714745.520 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:05.520Z,1516714745.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 207 2018-01-23T13:39:05.521Z,1516714745.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:39:05.545Z,1516714745.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:39:05.545Z,1516714745.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:39:05.904Z,1516714745.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:05.963Z,1516714745.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:39:05.963Z,1516714745.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207 2018-01-23T13:39:05.963Z,1516714745.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:39:05.963Z,1516714745.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 207 2018-01-23T13:39:06.301Z,1516714746.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:06.315Z,1516714746.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:39:06.315Z,1516714746.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:39:06.316Z,1516714746.316 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:39:06.316Z,1516714746.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:39:06.317Z,1516714746.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:39:06.317Z,1516714746.317 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:39:06.697Z,1516714746.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:06.718Z,1516714746.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:39:06.720Z,1516714746.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:07.095Z,1516714747.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:07.127Z,1516714747.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:39:07.128Z,1516714747.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:07.501Z,1516714747.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:07.515Z,1516714747.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:39:07.516Z,1516714747.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:07.910Z,1516714747.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:07.925Z,1516714747.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:39:07.926Z,1516714747.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:08.314Z,1516714748.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:08.329Z,1516714748.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:39:08.330Z,1516714748.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:08.712Z,1516714748.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:08.726Z,1516714748.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:39:08.727Z,1516714748.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:09.097Z,1516714749.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:09.119Z,1516714749.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:39:09.120Z,1516714749.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:09.495Z,1516714749.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:09.518Z,1516714749.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:39:09.519Z,1516714749.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:09.909Z,1516714749.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:09.924Z,1516714749.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:39:09.925Z,1516714749.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:10.312Z,1516714750.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:10.332Z,1516714750.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:39:10.332Z,1516714750.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:10.710Z,1516714750.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:10.735Z,1516714750.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:39:10.737Z,1516714750.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:11.093Z,1516714751.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:11.120Z,1516714751.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:39:11.121Z,1516714751.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:11.490Z,1516714751.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:11.525Z,1516714751.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:39:11.526Z,1516714751.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:11.911Z,1516714751.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:11.926Z,1516714751.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:39:11.927Z,1516714751.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:12.315Z,1516714752.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:12.330Z,1516714752.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:39:12.332Z,1516714752.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:12.708Z,1516714752.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:12.735Z,1516714752.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:39:12.736Z,1516714752.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:13.097Z,1516714753.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:13.123Z,1516714753.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:39:13.124Z,1516714753.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:13.492Z,1516714753.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:13.528Z,1516714753.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:39:13.529Z,1516714753.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:13.915Z,1516714753.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:13.930Z,1516714753.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:39:13.931Z,1516714753.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:14.312Z,1516714754.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:14.338Z,1516714754.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:39:14.343Z,1516714754.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:14.715Z,1516714754.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:14.729Z,1516714754.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:39:14.730Z,1516714754.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:15.093Z,1516714755.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:15.124Z,1516714755.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:39:15.125Z,1516714755.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:15.492Z,1516714755.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:15.528Z,1516714755.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:39:15.529Z,1516714755.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:15.903Z,1516714755.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:15.938Z,1516714755.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:39:15.939Z,1516714755.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:16.315Z,1516714756.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:16.331Z,1516714756.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:39:16.332Z,1516714756.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:16.703Z,1516714756.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:16.737Z,1516714756.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:39:16.737Z,1516714756.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:17.093Z,1516714757.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:17.129Z,1516714757.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:39:17.130Z,1516714757.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:17.490Z,1516714757.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:17.505Z,1516714757.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:39:17.506Z,1516714757.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:17.903Z,1516714757.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:17.929Z,1516714757.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:39:17.930Z,1516714757.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:18.307Z,1516714758.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:18.342Z,1516714758.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:39:18.343Z,1516714758.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:18.703Z,1516714758.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:18.738Z,1516714758.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:39:18.739Z,1516714758.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:19.097Z,1516714759.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:19.124Z,1516714759.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:39:19.125Z,1516714759.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:19.491Z,1516714759.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:19.512Z,1516714759.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:39:19.513Z,1516714759.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:19.908Z,1516714759.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:19.933Z,1516714759.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:39:19.934Z,1516714759.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:20.307Z,1516714760.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:20.333Z,1516714760.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:39:20.334Z,1516714760.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:20.702Z,1516714760.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:20.737Z,1516714760.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:39:20.738Z,1516714760.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:21.093Z,1516714761.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:21.108Z,1516714761.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:39:21.109Z,1516714761.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:21.498Z,1516714761.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:21.512Z,1516714761.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:39:21.513Z,1516714761.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:21.914Z,1516714761.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:21.944Z,1516714761.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:39:21.945Z,1516714761.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:22.315Z,1516714762.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:22.340Z,1516714762.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:39:22.341Z,1516714762.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:22.715Z,1516714762.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:22.739Z,1516714762.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:39:22.740Z,1516714762.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:23.105Z,1516714763.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:23.119Z,1516714763.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:39:23.120Z,1516714763.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:23.494Z,1516714763.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:23.508Z,1516714763.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:39:23.509Z,1516714763.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:23.907Z,1516714763.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:23.922Z,1516714763.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:39:23.935Z,1516714763.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:24.315Z,1516714764.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:24.348Z,1516714764.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:39:24.349Z,1516714764.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:24.707Z,1516714764.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:24.722Z,1516714764.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:39:24.723Z,1516714764.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:25.098Z,1516714765.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:25.124Z,1516714765.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:39:25.125Z,1516714765.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:25.503Z,1516714765.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:25.517Z,1516714765.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:39:25.518Z,1516714765.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:25.908Z,1516714765.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:25.923Z,1516714765.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:26.308Z,1516714766.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:26.329Z,1516714766.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:26.708Z,1516714766.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:26.722Z,1516714766.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:27.097Z,1516714767.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:27.121Z,1516714767.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:27.501Z,1516714767.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:27.521Z,1516714767.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:27.911Z,1516714767.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:27.926Z,1516714767.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:28.312Z,1516714768.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:28.327Z,1516714768.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:28.710Z,1516714768.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:28.733Z,1516714768.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:29.107Z,1516714769.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:29.123Z,1516714769.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:29.497Z,1516714769.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:29.520Z,1516714769.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:29.916Z,1516714769.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:29.932Z,1516714769.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:30.316Z,1516714770.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:30.331Z,1516714770.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:30.712Z,1516714770.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:30.728Z,1516714770.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:31.098Z,1516714771.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:31.130Z,1516714771.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:31.502Z,1516714771.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:31.517Z,1516714771.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:31.914Z,1516714771.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:31.929Z,1516714771.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:32.316Z,1516714772.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:32.332Z,1516714772.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:32.713Z,1516714772.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:32.728Z,1516714772.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:33.097Z,1516714773.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:33.128Z,1516714773.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:33.491Z,1516714773.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:33.528Z,1516714773.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:33.911Z,1516714773.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:33.927Z,1516714773.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:34.315Z,1516714774.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:34.338Z,1516714774.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:34.711Z,1516714774.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:34.727Z,1516714774.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:35.093Z,1516714775.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:35.129Z,1516714775.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:35.490Z,1516714775.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:35.525Z,1516714775.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:35.908Z,1516714775.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:35.936Z,1516714775.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:36.320Z,1516714776.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:36.335Z,1516714776.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:36.711Z,1516714776.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:36.726Z,1516714776.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:37.093Z,1516714777.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:37.125Z,1516714777.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:37.492Z,1516714777.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:37.528Z,1516714777.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:37.912Z,1516714777.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:37.927Z,1516714777.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:38.314Z,1516714778.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:38.329Z,1516714778.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:38.720Z,1516714778.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:38.735Z,1516714778.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:39.091Z,1516714779.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:39.122Z,1516714779.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:39.497Z,1516714779.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:39.523Z,1516714779.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:39.892Z,1516714779.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:39.929Z,1516714779.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:40.316Z,1516714780.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:40.331Z,1516714780.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:40.713Z,1516714780.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:40.742Z,1516714780.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:41.115Z,1516714781.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:41.130Z,1516714781.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:41.492Z,1516714781.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:41.525Z,1516714781.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:41.896Z,1516714781.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:41.928Z,1516714781.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:42.294Z,1516714782.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:42.330Z,1516714782.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:45.402Z,1516714785.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:45.426Z,1516714785.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:45.540Z,1516714785.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:45.573Z,1516714785.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:45.883Z,1516714785.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:45.898Z,1516714785.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:46.295Z,1516714786.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:46.328Z,1516714786.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:46.673Z,1516714786.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:46.688Z,1516714786.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:47.081Z,1516714787.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:47.097Z,1516714787.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:47.477Z,1516714787.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:47.496Z,1516714787.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:47.877Z,1516714787.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:47.893Z,1516714787.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:48.280Z,1516714788.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:48.294Z,1516714788.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:48.683Z,1516714788.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:48.704Z,1516714788.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:49.079Z,1516714789.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:49.094Z,1516714789.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:49.475Z,1516714789.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:49.490Z,1516714789.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:49.876Z,1516714789.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:49.890Z,1516714789.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:50.276Z,1516714790.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:50.291Z,1516714790.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:50.675Z,1516714790.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:50.690Z,1516714790.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:51.079Z,1516714791.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:51.094Z,1516714791.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:51.483Z,1516714791.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:51.498Z,1516714791.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:51.879Z,1516714791.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:51.894Z,1516714791.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:52.276Z,1516714792.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:52.296Z,1516714792.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:52.673Z,1516714792.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:52.688Z,1516714792.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:53.072Z,1516714793.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:53.093Z,1516714793.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:53.477Z,1516714793.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:53.492Z,1516714793.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:53.876Z,1516714793.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:53.891Z,1516714793.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:54.281Z,1516714794.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:54.301Z,1516714794.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:54.683Z,1516714794.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:54.698Z,1516714794.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:55.081Z,1516714795.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:55.101Z,1516714795.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:55.476Z,1516714795.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:55.491Z,1516714795.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:55.877Z,1516714795.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:55.891Z,1516714795.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:56.276Z,1516714796.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:56.294Z,1516714796.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:56.677Z,1516714796.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:56.692Z,1516714796.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:57.083Z,1516714797.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:57.104Z,1516714797.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:57.488Z,1516714797.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:57.502Z,1516714797.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:57.882Z,1516714797.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:57.897Z,1516714797.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:58.278Z,1516714798.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:58.292Z,1516714798.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:58.676Z,1516714798.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:58.701Z,1516714798.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:59.076Z,1516714799.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:59.091Z,1516714799.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:59.478Z,1516714799.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:59.492Z,1516714799.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:39:59.876Z,1516714799.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:39:59.895Z,1516714799.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:00.282Z,1516714800.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:00.309Z,1516714800.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:00.691Z,1516714800.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:00.706Z,1516714800.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:01.087Z,1516714801.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:01.102Z,1516714801.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:01.475Z,1516714801.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:01.504Z,1516714801.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:01.875Z,1516714801.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:01.897Z,1516714801.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:02.282Z,1516714802.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:02.297Z,1516714802.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:02.672Z,1516714802.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:02.694Z,1516714802.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:03.088Z,1516714803.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:03.103Z,1516714803.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:03.492Z,1516714803.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:03.507Z,1516714803.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:03.887Z,1516714803.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:03.902Z,1516714803.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:04.279Z,1516714804.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:04.293Z,1516714804.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:04.672Z,1516714804.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:04.699Z,1516714804.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:05.069Z,1516714805.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:05.105Z,1516714805.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:05.483Z,1516714805.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:05.498Z,1516714805.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:05.883Z,1516714805.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:05.898Z,1516714805.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:06.292Z,1516714806.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:06.307Z,1516714806.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:06.693Z,1516714806.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:06.708Z,1516714806.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:07.085Z,1516714807.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:07.108Z,1516714807.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:07.469Z,1516714807.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:07.497Z,1516714807.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:07.869Z,1516714807.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:07.909Z,1516714807.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:08.269Z,1516714808.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:08.302Z,1516714808.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:08.668Z,1516714808.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:08.702Z,1516714808.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:09.090Z,1516714809.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:09.112Z,1516714809.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:09.498Z,1516714809.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:09.513Z,1516714809.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:09.888Z,1516714809.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:09.903Z,1516714809.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:10.268Z,1516714810.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:10.303Z,1516714810.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:10.666Z,1516714810.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:10.689Z,1516714810.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:11.068Z,1516714811.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:11.105Z,1516714811.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:11.469Z,1516714811.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:11.506Z,1516714811.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:11.866Z,1516714811.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:11.881Z,1516714811.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:12.279Z,1516714812.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:12.305Z,1516714812.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:12.683Z,1516714812.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:12.713Z,1516714812.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:13.079Z,1516714813.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:13.114Z,1516714813.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:13.468Z,1516714813.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:13.505Z,1516714813.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:13.872Z,1516714813.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:13.887Z,1516714813.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:14.277Z,1516714814.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:14.292Z,1516714814.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:14.673Z,1516714814.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:14.688Z,1516714814.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:15.082Z,1516714815.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:15.097Z,1516714815.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:15.483Z,1516714815.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:15.498Z,1516714815.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:15.880Z,1516714815.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:15.894Z,1516714815.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:16.276Z,1516714816.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:16.296Z,1516714816.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:16.673Z,1516714816.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:16.688Z,1516714816.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:17.076Z,1516714817.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:17.090Z,1516714817.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:17.477Z,1516714817.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:17.496Z,1516714817.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:17.873Z,1516714817.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:17.888Z,1516714817.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:18.279Z,1516714818.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:18.294Z,1516714818.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:18.683Z,1516714818.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:18.698Z,1516714818.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:19.080Z,1516714819.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:19.094Z,1516714819.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:19.475Z,1516714819.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:19.490Z,1516714819.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:19.876Z,1516714819.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:19.890Z,1516714819.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:20.274Z,1516714820.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:20.301Z,1516714820.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:20.676Z,1516714820.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:20.691Z,1516714820.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:21.082Z,1516714821.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:21.097Z,1516714821.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:21.483Z,1516714821.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:21.498Z,1516714821.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:21.881Z,1516714821.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:21.901Z,1516714821.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:22.277Z,1516714822.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:22.292Z,1516714822.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:22.672Z,1516714822.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:22.692Z,1516714822.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:23.076Z,1516714823.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:23.091Z,1516714823.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:23.478Z,1516714823.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:23.492Z,1516714823.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:23.876Z,1516714823.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:23.897Z,1516714823.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:24.283Z,1516714824.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:24.298Z,1516714824.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:24.683Z,1516714824.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:24.698Z,1516714824.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:25.082Z,1516714825.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:25.101Z,1516714825.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:25.476Z,1516714825.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:25.497Z,1516714825.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:25.881Z,1516714825.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:25.895Z,1516714825.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:26.276Z,1516714826.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:26.294Z,1516714826.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:26.676Z,1516714826.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:26.691Z,1516714826.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:27.082Z,1516714827.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:27.097Z,1516714827.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:27.483Z,1516714827.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:27.498Z,1516714827.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:27.881Z,1516714827.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:27.901Z,1516714827.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:28.277Z,1516714828.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:28.292Z,1516714828.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:28.676Z,1516714828.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:28.691Z,1516714828.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:29.076Z,1516714829.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:29.091Z,1516714829.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:29.476Z,1516714829.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:29.490Z,1516714829.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:29.868Z,1516714829.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:29.904Z,1516714829.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:30.288Z,1516714830.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:30.302Z,1516714830.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:30.691Z,1516714830.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:30.712Z,1516714830.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:31.084Z,1516714831.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:31.111Z,1516714831.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:31.472Z,1516714831.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:31.498Z,1516714831.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:31.869Z,1516714831.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:31.896Z,1516714831.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:32.269Z,1516714832.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:32.296Z,1516714832.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:32.668Z,1516714832.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:32.705Z,1516714832.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:33.079Z,1516714833.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:33.116Z,1516714833.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:33.487Z,1516714833.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:33.513Z,1516714833.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:33.887Z,1516714833.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:33.913Z,1516714833.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:34.269Z,1516714834.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:34.289Z,1516714834.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:34.672Z,1516714834.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:34.688Z,1516714834.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:35.079Z,1516714835.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:35.114Z,1516714835.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:35.481Z,1516714835.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:35.513Z,1516714835.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:35.874Z,1516714835.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:35.897Z,1516714835.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:36.283Z,1516714836.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:36.298Z,1516714836.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:36.691Z,1516714836.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:36.722Z,1516714836.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:37.080Z,1516714837.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:37.094Z,1516714837.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:37.482Z,1516714837.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:37.497Z,1516714837.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:37.872Z,1516714837.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:37.899Z,1516714837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:38.276Z,1516714838.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:38.296Z,1516714838.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:38.676Z,1516714838.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:38.695Z,1516714838.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:39.083Z,1516714839.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:39.099Z,1516714839.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:39.484Z,1516714839.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:39.499Z,1516714839.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:39.883Z,1516714839.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:39.897Z,1516714839.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:40.278Z,1516714840.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:40.293Z,1516714840.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:40.297Z,1516714840.297 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:35:39.0Z 2018-01-23T13:40:40.297Z,1516714840.297 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T13:40:40.297Z,1516714840.297 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T13:40:40.678Z,1516714840.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:40.694Z,1516714840.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:41.227Z,1516714841.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:41.242Z,1516714841.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:41.482Z,1516714841.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:41.501Z,1516714841.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:44.587Z,1516714844.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:44.602Z,1516714844.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:44.679Z,1516714844.679 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0244.lzma 2018-01-23T13:40:44.711Z,1516714844.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:44.753Z,1516714844.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:45.092Z,1516714845.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:45.107Z,1516714845.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:45.457Z,1516714845.457 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0244.lzma.bak 2018-01-23T13:40:45.458Z,1516714845.458 [DataOverHttps](INFO): SBD MOMSN=7755653 2018-01-23T13:40:45.498Z,1516714845.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:45.513Z,1516714845.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:46.195Z,1516714846.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:46.210Z,1516714846.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:46.318Z,1516714846.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:46.361Z,1516714846.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:49.387Z,1516714849.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:49.402Z,1516714849.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:49.515Z,1516714849.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:49.561Z,1516714849.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:49.863Z,1516714849.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:49.893Z,1516714849.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:50.275Z,1516714850.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:50.289Z,1516714850.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:50.646Z,1516714850.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:50.689Z,1516714850.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:51.049Z,1516714851.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:51.069Z,1516714851.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:54.356Z,1516714854.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:54.371Z,1516714854.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:55.923Z,1516714855.923 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0245.lzma 2018-01-23T13:40:55.955Z,1516714855.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:55.970Z,1516714855.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:56.094Z,1516714856.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:56.129Z,1516714856.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:56.815Z,1516714856.815 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0245.lzma.bak 2018-01-23T13:40:56.815Z,1516714856.815 [DataOverHttps](INFO): SBD MOMSN=7755655 2018-01-23T13:40:56.865Z,1516714856.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:56.879Z,1516714856.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:57.232Z,1516714857.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:57.256Z,1516714857.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:40:57.259Z,1516714857.259 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T13:40:57.259Z,1516714857.259 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T13:40:57.259Z,1516714857.259 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T13:40:57.365Z,1516714857.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:40:57.380Z,1516714857.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:00.465Z,1516714860.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:00.480Z,1516714860.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:00.573Z,1516714860.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:00.593Z,1516714860.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:00.983Z,1516714860.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:01.017Z,1516714861.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:01.375Z,1516714861.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:01.412Z,1516714861.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:01.774Z,1516714861.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:01.789Z,1516714861.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:02.173Z,1516714862.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:02.193Z,1516714862.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:02.574Z,1516714862.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:02.589Z,1516714862.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:02.965Z,1516714862.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:02.988Z,1516714862.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:03.379Z,1516714863.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:03.394Z,1516714863.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:03.779Z,1516714863.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:03.794Z,1516714863.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:04.174Z,1516714864.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:04.194Z,1516714864.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:04.574Z,1516714864.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:04.589Z,1516714864.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:04.959Z,1516714864.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:04.996Z,1516714864.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:05.374Z,1516714865.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:05.389Z,1516714865.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:05.758Z,1516714865.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:05.794Z,1516714865.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:06.174Z,1516714866.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:06.201Z,1516714866.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:06.581Z,1516714866.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:06.601Z,1516714866.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:06.987Z,1516714866.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:07.009Z,1516714867.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:07.375Z,1516714867.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:07.390Z,1516714867.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:07.758Z,1516714867.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:07.797Z,1516714867.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:08.165Z,1516714868.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:08.194Z,1516714868.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:08.577Z,1516714868.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:08.592Z,1516714868.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:08.960Z,1516714868.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:08.997Z,1516714868.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:09.381Z,1516714869.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:09.397Z,1516714869.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:09.781Z,1516714869.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:09.796Z,1516714869.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:10.185Z,1516714870.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:10.201Z,1516714870.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:10.565Z,1516714870.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:10.597Z,1516714870.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:10.957Z,1516714870.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:10.972Z,1516714870.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:11.364Z,1516714871.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:11.380Z,1516714871.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:11.768Z,1516714871.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:11.806Z,1516714871.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:12.179Z,1516714872.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:12.213Z,1516714872.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:12.567Z,1516714872.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:12.582Z,1516714872.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:12.971Z,1516714872.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:12.986Z,1516714872.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:13.369Z,1516714873.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:13.384Z,1516714873.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:13.762Z,1516714873.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:13.789Z,1516714873.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:14.171Z,1516714874.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:14.193Z,1516714874.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:14.571Z,1516714874.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:14.585Z,1516714874.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:14.962Z,1516714874.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:14.986Z,1516714874.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:15.379Z,1516714875.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:15.394Z,1516714875.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:15.779Z,1516714875.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:15.794Z,1516714875.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:16.176Z,1516714876.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:16.201Z,1516714876.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:16.560Z,1516714876.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:16.597Z,1516714876.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:16.966Z,1516714876.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:16.993Z,1516714876.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:17.366Z,1516714877.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:17.395Z,1516714877.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:17.758Z,1516714877.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:17.794Z,1516714877.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:18.171Z,1516714878.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:18.209Z,1516714878.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:18.575Z,1516714878.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:18.592Z,1516714878.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:18.988Z,1516714878.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:19.009Z,1516714879.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:19.357Z,1516714879.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:19.389Z,1516714879.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:19.759Z,1516714879.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:19.808Z,1516714879.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:20.160Z,1516714880.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:20.196Z,1516714880.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:20.566Z,1516714880.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:20.598Z,1516714880.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:20.955Z,1516714880.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:20.997Z,1516714880.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:21.369Z,1516714881.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:21.385Z,1516714881.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x18626 got:0x17072 2018-01-23T13:41:21.413Z,1516714881.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:21.785Z,1516714881.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:21.800Z,1516714881.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:22.171Z,1516714882.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:22.208Z,1516714882.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:22.557Z,1516714882.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:22.597Z,1516714882.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:22.959Z,1516714882.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:22.968Z,1516714882.968 [PNI_TCM](ERROR): CRC does not match. Expected:0x24158 got:0x51545 2018-01-23T13:41:23.002Z,1516714883.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:23.364Z,1516714883.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:23.397Z,1516714883.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:23.758Z,1516714883.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:23.797Z,1516714883.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:24.173Z,1516714884.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:24.202Z,1516714884.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:24.569Z,1516714884.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:24.604Z,1516714884.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:24.979Z,1516714884.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:25.009Z,1516714885.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:25.368Z,1516714885.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:25.383Z,1516714885.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:25.762Z,1516714885.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:25.805Z,1516714885.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:26.163Z,1516714886.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:26.176Z,1516714886.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x17843 got:0x6210 2018-01-23T13:41:26.205Z,1516714886.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:26.565Z,1516714886.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:26.598Z,1516714886.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:26.965Z,1516714886.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:26.984Z,1516714886.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:27.381Z,1516714887.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:27.409Z,1516714887.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:27.777Z,1516714887.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:27.792Z,1516714887.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:28.170Z,1516714888.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:28.201Z,1516714888.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:28.572Z,1516714888.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:28.587Z,1516714888.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:28.966Z,1516714888.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:28.993Z,1516714888.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:29.374Z,1516714889.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:29.381Z,1516714889.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T13:41:29.420Z,1516714889.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:29.768Z,1516714889.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:29.785Z,1516714889.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:30.176Z,1516714890.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:30.197Z,1516714890.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:30.575Z,1516714890.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:30.617Z,1516714890.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:30.974Z,1516714890.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:30.982Z,1516714890.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x61281 got:0x73 2018-01-23T13:41:31.005Z,1516714891.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:31.373Z,1516714891.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:31.396Z,1516714891.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:31.759Z,1516714891.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:31.774Z,1516714891.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:32.159Z,1516714892.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:32.193Z,1516714892.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:32.558Z,1516714892.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:32.582Z,1516714892.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:32.955Z,1516714892.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:32.974Z,1516714892.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:33.396Z,1516714893.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:33.455Z,1516714893.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:33.771Z,1516714893.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:33.797Z,1516714893.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:34.167Z,1516714894.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:34.186Z,1516714894.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:34.557Z,1516714894.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:34.576Z,1516714894.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:34.961Z,1516714894.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:34.976Z,1516714894.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:35.356Z,1516714895.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:35.392Z,1516714895.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:35.759Z,1516714895.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:35.774Z,1516714895.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:36.173Z,1516714896.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:36.196Z,1516714896.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:36.574Z,1516714896.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:36.605Z,1516714896.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:37.002Z,1516714897.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:37.021Z,1516714897.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:37.366Z,1516714897.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:37.404Z,1516714897.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:37.758Z,1516714897.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:37.795Z,1516714897.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:38.168Z,1516714898.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:38.182Z,1516714898.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:38.563Z,1516714898.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:38.608Z,1516714898.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:38.958Z,1516714898.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:38.977Z,1516714898.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:39.373Z,1516714899.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:39.390Z,1516714899.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:39.781Z,1516714899.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:39.815Z,1516714899.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:40.167Z,1516714900.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:40.209Z,1516714900.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:40.565Z,1516714900.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:40.580Z,1516714900.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:40.967Z,1516714900.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:40.986Z,1516714900.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:41.369Z,1516714901.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:41.385Z,1516714901.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:41.764Z,1516714901.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:41.806Z,1516714901.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:42.168Z,1516714902.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:42.193Z,1516714902.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:42.568Z,1516714902.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:42.597Z,1516714902.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:42.977Z,1516714902.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:42.992Z,1516714902.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:43.366Z,1516714903.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:43.419Z,1516714903.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:43.762Z,1516714903.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:43.782Z,1516714903.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:44.173Z,1516714904.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:44.192Z,1516714904.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:44.565Z,1516714904.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:44.594Z,1516714904.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:44.971Z,1516714904.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:45.022Z,1516714905.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:45.372Z,1516714905.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:45.401Z,1516714905.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:45.783Z,1516714905.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:45.800Z,1516714905.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:46.180Z,1516714906.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:46.195Z,1516714906.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:46.557Z,1516714906.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:46.601Z,1516714906.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:46.972Z,1516714906.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:46.987Z,1516714906.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:47.359Z,1516714907.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:47.398Z,1516714907.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:47.762Z,1516714907.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:47.794Z,1516714907.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:48.188Z,1516714908.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:48.238Z,1516714908.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:48.580Z,1516714908.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:48.604Z,1516714908.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:48.975Z,1516714908.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:48.000Z,1516714909.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:49.357Z,1516714909.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:49.397Z,1516714909.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:49.757Z,1516714909.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:49.794Z,1516714909.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:50.157Z,1516714910.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:50.193Z,1516714910.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:50.558Z,1516714910.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:50.586Z,1516714910.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:50.957Z,1516714910.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:50.989Z,1516714910.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:51.367Z,1516714911.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:51.398Z,1516714911.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:51.779Z,1516714911.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:51.813Z,1516714911.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:52.171Z,1516714912.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:52.206Z,1516714912.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:52.565Z,1516714912.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:52.581Z,1516714912.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:52.968Z,1516714912.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:52.983Z,1516714912.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:53.363Z,1516714913.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:53.386Z,1516714913.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:53.764Z,1516714913.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:53.786Z,1516714913.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:54.172Z,1516714914.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:54.190Z,1516714914.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:54.575Z,1516714914.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:54.590Z,1516714914.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:54.976Z,1516714914.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:54.991Z,1516714914.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:55.367Z,1516714915.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:55.383Z,1516714915.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:55.761Z,1516714915.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:55.784Z,1516714915.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:56.174Z,1516714916.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:56.197Z,1516714916.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:56.579Z,1516714916.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:56.595Z,1516714916.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:56.974Z,1516714916.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:56.990Z,1516714916.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:57.369Z,1516714917.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:57.389Z,1516714917.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:41:57.767Z,1516714917.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:41:57.782Z,1516714917.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:00.876Z,1516714920.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:00.897Z,1516714920.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:01.022Z,1516714921.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:01.041Z,1516714921.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:01.379Z,1516714921.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:01.432Z,1516714921.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:01.775Z,1516714921.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:01.790Z,1516714921.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:02.165Z,1516714922.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:02.188Z,1516714922.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:02.570Z,1516714922.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:02.588Z,1516714922.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:02.967Z,1516714922.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:02.988Z,1516714922.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:03.379Z,1516714923.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:03.394Z,1516714923.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:03.782Z,1516714923.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:03.797Z,1516714923.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:04.180Z,1516714924.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:04.195Z,1516714924.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:04.565Z,1516714924.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:04.587Z,1516714924.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:04.969Z,1516714924.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:04.988Z,1516714924.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:05.375Z,1516714925.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:05.390Z,1516714925.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:05.392Z,1516714925.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:05.392Z,1516714925.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208 2018-01-23T13:42:05.392Z,1516714925.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:42:05.408Z,1516714925.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:42:05.761Z,1516714925.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:05.793Z,1516714925.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:05.805Z,1516714925.805 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:42:05.805Z,1516714925.805 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208 2018-01-23T13:42:06.179Z,1516714926.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:06.194Z,1516714926.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:06.195Z,1516714926.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:42:06.196Z,1516714926.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:42:06.196Z,1516714926.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:42:06.584Z,1516714926.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:06.599Z,1516714926.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:06.599Z,1516714926.599 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208 2018-01-23T13:42:06.599Z,1516714926.599 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:42:06.601Z,1516714926.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:06.601Z,1516714926.601 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 208 2018-01-23T13:42:06.601Z,1516714926.601 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:42:06.615Z,1516714926.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:42:06.616Z,1516714926.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:42:06.988Z,1516714926.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:07.018Z,1516714927.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:42:07.018Z,1516714927.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208 2018-01-23T13:42:07.018Z,1516714927.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:42:07.018Z,1516714927.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 208 2018-01-23T13:42:07.365Z,1516714927.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:07.396Z,1516714927.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:42:07.397Z,1516714927.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:42:07.397Z,1516714927.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:42:07.397Z,1516714927.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:42:07.398Z,1516714927.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:42:07.398Z,1516714927.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:42:07.761Z,1516714927.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:07.788Z,1516714927.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:42:07.789Z,1516714927.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:08.172Z,1516714928.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:08.198Z,1516714928.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:42:08.199Z,1516714928.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:08.575Z,1516714928.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:08.614Z,1516714928.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:42:08.615Z,1516714928.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:08.970Z,1516714928.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:08.997Z,1516714928.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:42:08.998Z,1516714928.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:09.362Z,1516714929.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:09.400Z,1516714929.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:42:09.401Z,1516714929.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:09.765Z,1516714929.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:09.779Z,1516714929.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:42:09.780Z,1516714929.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:10.183Z,1516714930.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:10.210Z,1516714930.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:42:10.212Z,1516714930.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:10.587Z,1516714930.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:10.616Z,1516714930.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:42:10.617Z,1516714930.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:10.983Z,1516714930.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:11.008Z,1516714931.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:42:11.009Z,1516714931.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:11.366Z,1516714931.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:11.380Z,1516714931.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:42:11.381Z,1516714931.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:11.766Z,1516714931.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:11.792Z,1516714931.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:42:11.793Z,1516714931.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:12.174Z,1516714932.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:12.188Z,1516714932.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:42:12.189Z,1516714932.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:12.574Z,1516714932.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:12.589Z,1516714932.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:42:12.590Z,1516714932.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:12.974Z,1516714932.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:12.989Z,1516714932.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:42:12.990Z,1516714932.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:13.370Z,1516714933.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:13.388Z,1516714933.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:42:13.389Z,1516714933.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:13.770Z,1516714933.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:13.785Z,1516714933.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:42:13.786Z,1516714933.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:14.174Z,1516714934.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:14.189Z,1516714934.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:42:14.190Z,1516714934.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:14.574Z,1516714934.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:14.588Z,1516714934.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:42:14.589Z,1516714934.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:14.975Z,1516714934.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:14.989Z,1516714934.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:42:14.990Z,1516714934.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:15.369Z,1516714935.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:15.384Z,1516714935.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:42:15.385Z,1516714935.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:15.769Z,1516714935.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:15.783Z,1516714935.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:42:15.784Z,1516714935.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:16.175Z,1516714936.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:16.196Z,1516714936.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:42:16.197Z,1516714936.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:16.578Z,1516714936.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:16.593Z,1516714936.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:42:16.594Z,1516714936.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:16.978Z,1516714936.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:16.992Z,1516714936.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:42:16.993Z,1516714936.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:17.375Z,1516714937.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:17.390Z,1516714937.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:42:17.391Z,1516714937.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:17.768Z,1516714937.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:17.796Z,1516714937.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:42:17.797Z,1516714937.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:18.148Z,1516714938.148 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T13:42:18.148Z,1516714938.148 [NAL9602] Data Fault, FailCount= 2 2018-01-23T13:42:18.148Z,1516714938.148 [NAL9602](ERROR): Data Fault 2018-01-23T13:42:18.184Z,1516714938.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:18.198Z,1516714938.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:42:18.199Z,1516714938.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:18.225Z,1516714938.225 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T13:42:18.544Z,1516714938.544 [NAL9602](INFO): Powering down 2018-01-23T13:42:18.562Z,1516714938.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:18.600Z,1516714938.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:42:18.601Z,1516714938.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:18.961Z,1516714938.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:18.993Z,1516714938.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:42:18.993Z,1516714938.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:19.360Z,1516714939.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:19.387Z,1516714939.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:42:19.388Z,1516714939.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:19.401Z,1516714939.401 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T13:42:19.401Z,1516714939.401 [NAL9602] No Fault, FailCount= 2 2018-01-23T13:42:19.761Z,1516714939.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:19.787Z,1516714939.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:42:19.788Z,1516714939.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:20.161Z,1516714940.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:20.194Z,1516714940.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:42:20.195Z,1516714940.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:20.560Z,1516714940.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:20.587Z,1516714940.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:42:20.588Z,1516714940.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:20.961Z,1516714940.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:20.992Z,1516714940.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:42:20.993Z,1516714940.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:21.361Z,1516714941.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:21.393Z,1516714941.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:42:21.393Z,1516714941.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:21.760Z,1516714941.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:21.793Z,1516714941.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:42:21.794Z,1516714941.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:22.161Z,1516714942.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:22.196Z,1516714942.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:42:22.197Z,1516714942.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:22.561Z,1516714942.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:22.595Z,1516714942.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:42:22.596Z,1516714942.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:22.958Z,1516714942.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:22.972Z,1516714942.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:42:22.973Z,1516714942.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:23.361Z,1516714943.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:23.375Z,1516714943.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:42:23.376Z,1516714943.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:23.761Z,1516714943.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:23.775Z,1516714943.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:42:23.776Z,1516714943.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:24.162Z,1516714944.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:24.176Z,1516714944.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:42:24.177Z,1516714944.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:24.572Z,1516714944.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:24.612Z,1516714944.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:42:24.613Z,1516714944.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:24.965Z,1516714944.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:24.987Z,1516714944.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:42:24.988Z,1516714944.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:25.369Z,1516714945.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:25.383Z,1516714945.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:42:25.384Z,1516714945.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:25.764Z,1516714945.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:25.787Z,1516714945.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:42:25.788Z,1516714945.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:26.174Z,1516714946.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:26.188Z,1516714946.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:42:26.189Z,1516714946.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:26.569Z,1516714946.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:26.594Z,1516714946.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:42:26.595Z,1516714946.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:26.974Z,1516714946.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:26.989Z,1516714946.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:27.365Z,1516714947.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:27.389Z,1516714947.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:27.770Z,1516714947.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:27.785Z,1516714947.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:28.166Z,1516714948.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:28.193Z,1516714948.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:28.574Z,1516714948.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:28.597Z,1516714948.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:28.968Z,1516714948.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:28.997Z,1516714948.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:29.361Z,1516714949.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:29.397Z,1516714949.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:29.761Z,1516714949.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:29.788Z,1516714949.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:30.160Z,1516714950.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:30.207Z,1516714950.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:30.565Z,1516714950.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:30.603Z,1516714950.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:30.967Z,1516714950.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:30.999Z,1516714950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:31.360Z,1516714951.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:31.375Z,1516714951.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:31.772Z,1516714951.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:31.804Z,1516714951.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:32.164Z,1516714952.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:32.185Z,1516714952.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:32.569Z,1516714952.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:32.584Z,1516714952.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:32.966Z,1516714952.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:32.986Z,1516714952.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:33.364Z,1516714953.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:33.392Z,1516714953.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:33.771Z,1516714953.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:33.786Z,1516714953.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:34.164Z,1516714954.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:34.185Z,1516714954.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:34.565Z,1516714954.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:34.593Z,1516714954.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:34.967Z,1516714954.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:34.990Z,1516714954.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:35.369Z,1516714955.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:35.384Z,1516714955.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:35.765Z,1516714955.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:35.788Z,1516714955.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:36.170Z,1516714956.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:36.186Z,1516714956.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:36.558Z,1516714956.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:36.595Z,1516714956.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:36.968Z,1516714956.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:36.988Z,1516714956.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:37.364Z,1516714957.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:37.418Z,1516714957.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:37.761Z,1516714957.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:37.787Z,1516714957.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:38.161Z,1516714958.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:38.193Z,1516714958.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:38.560Z,1516714958.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:38.596Z,1516714958.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:38.958Z,1516714958.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:38.993Z,1516714958.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:39.361Z,1516714959.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:39.397Z,1516714959.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:39.760Z,1516714959.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:39.788Z,1516714959.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:40.158Z,1516714960.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:40.196Z,1516714960.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:40.561Z,1516714960.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:40.592Z,1516714960.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:40.961Z,1516714960.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:40.998Z,1516714960.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:41.358Z,1516714961.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:41.373Z,1516714961.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:41.761Z,1516714961.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:41.776Z,1516714961.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:42.160Z,1516714962.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:42.175Z,1516714962.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:42.562Z,1516714962.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:42.577Z,1516714962.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:42.972Z,1516714962.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:43.007Z,1516714963.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:43.372Z,1516714963.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:43.411Z,1516714963.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:43.761Z,1516714963.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:43.776Z,1516714963.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:44.172Z,1516714964.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:44.207Z,1516714964.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:44.572Z,1516714964.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:44.611Z,1516714964.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:44.965Z,1516714964.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:44.980Z,1516714964.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:45.365Z,1516714965.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:45.380Z,1516714965.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:45.765Z,1516714965.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:45.780Z,1516714965.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:46.161Z,1516714966.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:46.176Z,1516714966.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:46.571Z,1516714966.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:46.586Z,1516714966.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:46.968Z,1516714966.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:46.982Z,1516714966.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:47.368Z,1516714967.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:47.383Z,1516714967.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:47.765Z,1516714967.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:47.789Z,1516714967.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:48.168Z,1516714968.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:48.183Z,1516714968.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:48.568Z,1516714968.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:48.583Z,1516714968.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:48.944Z,1516714968.944 [NAL9602](INFO): Powering up NAL9602 2018-01-23T13:42:48.968Z,1516714968.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:48.991Z,1516714968.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:49.369Z,1516714969.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:49.383Z,1516714969.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:49.769Z,1516714969.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:49.784Z,1516714969.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:50.168Z,1516714970.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:50.186Z,1516714970.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:50.565Z,1516714970.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:50.587Z,1516714970.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:50.969Z,1516714970.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:50.984Z,1516714970.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:51.368Z,1516714971.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:51.386Z,1516714971.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:51.769Z,1516714971.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:51.783Z,1516714971.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:52.169Z,1516714972.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:52.184Z,1516714972.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:52.565Z,1516714972.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:52.584Z,1516714972.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:52.969Z,1516714972.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:52.983Z,1516714972.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:53.369Z,1516714973.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:53.384Z,1516714973.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:53.764Z,1516714973.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:53.782Z,1516714973.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:54.169Z,1516714974.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:54.188Z,1516714974.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:54.558Z,1516714974.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:54.585Z,1516714974.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:54.961Z,1516714974.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:54.988Z,1516714974.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:55.360Z,1516714975.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:55.396Z,1516714975.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:55.761Z,1516714975.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:55.787Z,1516714975.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:56.161Z,1516714976.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:56.193Z,1516714976.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:56.560Z,1516714976.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:56.587Z,1516714976.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:56.958Z,1516714976.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:56.989Z,1516714976.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:57.365Z,1516714977.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:57.391Z,1516714977.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:42:57.761Z,1516714977.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:42:57.788Z,1516714977.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:00.854Z,1516714980.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:00.886Z,1516714980.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:00.992Z,1516714980.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:01.039Z,1516714981.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:01.334Z,1516714981.334 [NAL9602](INFO): NAL9602 initialized 2018-01-23T13:43:01.352Z,1516714981.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:01.408Z,1516714981.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:01.755Z,1516714981.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:01.770Z,1516714981.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:02.164Z,1516714982.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:02.196Z,1516714982.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:02.564Z,1516714982.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:02.592Z,1516714982.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:02.971Z,1516714982.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:02.996Z,1516714982.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:03.355Z,1516714983.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:03.370Z,1516714983.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:03.757Z,1516714983.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:03.777Z,1516714983.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:04.155Z,1516714984.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:04.170Z,1516714984.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:04.555Z,1516714984.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:04.570Z,1516714984.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:04.967Z,1516714984.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:04.982Z,1516714984.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:05.363Z,1516714985.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:05.378Z,1516714985.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:05.761Z,1516714985.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:05.776Z,1516714985.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:06.154Z,1516714986.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:06.181Z,1516714986.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:06.560Z,1516714986.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:06.575Z,1516714986.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:06.949Z,1516714986.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:06.977Z,1516714986.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:07.354Z,1516714987.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:07.371Z,1516714987.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:07.766Z,1516714987.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:07.788Z,1516714987.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:08.168Z,1516714988.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:08.189Z,1516714988.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:08.569Z,1516714988.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:08.589Z,1516714988.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:08.962Z,1516714988.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:08.978Z,1516714988.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:09.363Z,1516714989.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:09.379Z,1516714989.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:09.745Z,1516714989.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:09.777Z,1516714989.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:10.150Z,1516714990.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:10.178Z,1516714990.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:10.543Z,1516714990.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:10.567Z,1516714990.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:10.956Z,1516714990.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:10.983Z,1516714990.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:11.371Z,1516714991.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:11.386Z,1516714991.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:11.756Z,1516714991.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:11.787Z,1516714991.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:12.144Z,1516714992.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:12.161Z,1516714992.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:12.544Z,1516714992.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:12.560Z,1516714992.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:12.950Z,1516714992.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:12.965Z,1516714992.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:13.350Z,1516714993.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:13.365Z,1516714993.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:13.760Z,1516714993.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:13.775Z,1516714993.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:14.160Z,1516714994.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:14.175Z,1516714994.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:14.571Z,1516714994.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:14.603Z,1516714994.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:14.958Z,1516714994.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:14.973Z,1516714994.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:15.353Z,1516714995.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:15.368Z,1516714995.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:15.751Z,1516714995.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:15.772Z,1516714995.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:16.152Z,1516714996.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:16.167Z,1516714996.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:16.553Z,1516714996.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:16.569Z,1516714996.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:16.960Z,1516714996.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:16.975Z,1516714996.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:17.371Z,1516714997.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:17.401Z,1516714997.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:17.755Z,1516714997.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:17.782Z,1516714997.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:18.144Z,1516714998.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:18.181Z,1516714998.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:18.544Z,1516714998.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:18.559Z,1516714998.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:18.950Z,1516714998.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:18.965Z,1516714998.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:19.357Z,1516714999.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:19.393Z,1516714999.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:19.766Z,1516714999.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:19.801Z,1516714999.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:20.155Z,1516715000.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:20.170Z,1516715000.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:20.560Z,1516715000.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:20.575Z,1516715000.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:20.952Z,1516715000.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:20.967Z,1516715000.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:21.353Z,1516715001.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:21.368Z,1516715001.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:21.752Z,1516715001.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:21.767Z,1516715001.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:22.151Z,1516715002.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:22.172Z,1516715002.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:22.553Z,1516715002.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:22.568Z,1516715002.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:22.956Z,1516715002.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:22.971Z,1516715002.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:23.359Z,1516715003.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:23.380Z,1516715003.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:23.767Z,1516715003.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:23.802Z,1516715003.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:24.151Z,1516715004.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:24.174Z,1516715004.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:24.557Z,1516715004.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:24.571Z,1516715004.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:24.955Z,1516715004.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:24.970Z,1516715004.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:25.353Z,1516715005.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:25.368Z,1516715005.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:25.758Z,1516715005.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:25.780Z,1516715005.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:26.159Z,1516715006.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:26.174Z,1516715006.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:26.558Z,1516715006.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:26.573Z,1516715006.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:26.952Z,1516715006.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:26.967Z,1516715006.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:27.354Z,1516715007.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:27.369Z,1516715007.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:27.752Z,1516715007.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:27.771Z,1516715007.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:28.153Z,1516715008.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:28.168Z,1516715008.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:28.554Z,1516715008.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:28.569Z,1516715008.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:28.958Z,1516715008.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:28.973Z,1516715008.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:29.360Z,1516715009.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:29.374Z,1516715009.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:29.759Z,1516715009.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:29.774Z,1516715009.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:30.152Z,1516715010.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:30.171Z,1516715010.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:30.552Z,1516715010.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:30.567Z,1516715010.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:30.955Z,1516715010.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:30.970Z,1516715010.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:31.352Z,1516715011.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:31.371Z,1516715011.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:31.758Z,1516715011.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:31.780Z,1516715011.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:32.164Z,1516715012.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:32.178Z,1516715012.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:32.558Z,1516715012.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:32.577Z,1516715012.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:32.956Z,1516715012.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:32.970Z,1516715012.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:33.357Z,1516715013.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:33.373Z,1516715013.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:33.753Z,1516715013.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:33.768Z,1516715013.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:34.158Z,1516715014.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:34.172Z,1516715014.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:34.549Z,1516715014.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:34.577Z,1516715014.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:34.962Z,1516715014.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:34.977Z,1516715014.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:35.362Z,1516715015.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:35.377Z,1516715015.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:35.763Z,1516715015.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:35.778Z,1516715015.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:36.153Z,1516715016.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:36.168Z,1516715016.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:36.551Z,1516715016.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:36.577Z,1516715016.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:36.955Z,1516715016.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:36.970Z,1516715016.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:37.349Z,1516715017.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:37.372Z,1516715017.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:37.762Z,1516715017.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:37.777Z,1516715017.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:38.162Z,1516715018.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:38.181Z,1516715018.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:38.567Z,1516715018.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:38.582Z,1516715018.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:38.953Z,1516715018.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:38.968Z,1516715018.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:39.355Z,1516715019.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:39.370Z,1516715019.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:39.756Z,1516715019.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:39.794Z,1516715019.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:40.157Z,1516715020.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:40.172Z,1516715020.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:40.542Z,1516715020.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:40.573Z,1516715020.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:40.964Z,1516715020.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:40.979Z,1516715020.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:41.368Z,1516715021.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:41.382Z,1516715021.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:41.764Z,1516715021.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:41.779Z,1516715021.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:42.144Z,1516715022.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:42.177Z,1516715022.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:42.549Z,1516715022.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:42.576Z,1516715022.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:42.945Z,1516715022.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:42.985Z,1516715022.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:43.353Z,1516715023.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:43.380Z,1516715023.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:43.772Z,1516715023.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:43.787Z,1516715023.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:44.169Z,1516715024.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:44.185Z,1516715024.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:44.577Z,1516715024.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:44.592Z,1516715024.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:44.946Z,1516715024.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:44.985Z,1516715024.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:45.350Z,1516715025.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:45.385Z,1516715025.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:45.755Z,1516715025.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:45.770Z,1516715025.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:46.158Z,1516715026.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:46.173Z,1516715026.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:46.548Z,1516715026.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:46.563Z,1516715026.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:46.968Z,1516715026.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:46.993Z,1516715026.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:47.371Z,1516715027.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:47.397Z,1516715027.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:47.765Z,1516715027.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:47.797Z,1516715027.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:48.157Z,1516715028.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:48.197Z,1516715028.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:48.554Z,1516715028.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:48.570Z,1516715028.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:48.956Z,1516715028.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:48.972Z,1516715028.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:49.351Z,1516715029.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:49.372Z,1516715029.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:49.756Z,1516715029.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:49.771Z,1516715029.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:50.160Z,1516715030.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:50.175Z,1516715030.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:50.559Z,1516715030.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:50.573Z,1516715030.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:50.952Z,1516715030.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:50.972Z,1516715030.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:51.354Z,1516715031.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:51.370Z,1516715031.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:51.752Z,1516715031.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:51.772Z,1516715031.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:52.153Z,1516715032.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:52.168Z,1516715032.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:52.554Z,1516715032.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:52.569Z,1516715032.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:52.971Z,1516715032.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:53.006Z,1516715033.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:53.360Z,1516715033.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:53.381Z,1516715033.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:53.760Z,1516715033.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:53.775Z,1516715033.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:54.153Z,1516715034.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:54.173Z,1516715034.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:54.552Z,1516715034.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:54.567Z,1516715034.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:54.955Z,1516715034.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:54.970Z,1516715034.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:55.353Z,1516715035.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:55.368Z,1516715035.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:55.758Z,1516715035.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:55.780Z,1516715035.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:56.159Z,1516715036.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:56.174Z,1516715036.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:56.558Z,1516715036.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:56.581Z,1516715036.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:56.953Z,1516715036.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:56.968Z,1516715036.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:57.355Z,1516715037.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:57.370Z,1516715037.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:57.748Z,1516715037.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:57.775Z,1516715037.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:43:58.154Z,1516715038.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:43:58.169Z,1516715038.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:01.242Z,1516715041.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:01.266Z,1516715041.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:01.379Z,1516715041.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:01.410Z,1516715041.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:01.727Z,1516715041.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:01.742Z,1516715041.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:02.135Z,1516715042.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:02.167Z,1516715042.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:02.518Z,1516715042.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:02.533Z,1516715042.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:02.916Z,1516715042.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:02.931Z,1516715042.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:03.314Z,1516715043.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:03.341Z,1516715043.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:03.720Z,1516715043.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:03.735Z,1516715043.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:04.123Z,1516715044.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:04.138Z,1516715044.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:04.519Z,1516715044.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:04.534Z,1516715044.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:04.914Z,1516715044.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:04.933Z,1516715044.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:05.315Z,1516715045.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:05.337Z,1516715045.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:05.722Z,1516715045.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:05.738Z,1516715045.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:06.121Z,1516715046.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:06.141Z,1516715046.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:06.522Z,1516715046.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:06.541Z,1516715046.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:06.918Z,1516715046.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:06.933Z,1516715046.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:07.316Z,1516715047.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:07.332Z,1516715047.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:07.722Z,1516715047.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:07.741Z,1516715047.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:08.123Z,1516715048.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:08.138Z,1516715048.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:08.522Z,1516715048.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:08.541Z,1516715048.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:08.917Z,1516715048.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:08.932Z,1516715048.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:09.315Z,1516715049.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:09.341Z,1516715049.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:09.722Z,1516715049.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:09.741Z,1516715049.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:10.127Z,1516715050.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:10.142Z,1516715050.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:10.535Z,1516715050.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:10.574Z,1516715050.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:10.921Z,1516715050.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:10.936Z,1516715050.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:11.316Z,1516715051.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:11.331Z,1516715051.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:11.722Z,1516715051.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:11.744Z,1516715051.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:12.122Z,1516715052.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:12.141Z,1516715052.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:12.522Z,1516715052.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:12.541Z,1516715052.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:12.918Z,1516715052.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:12.933Z,1516715052.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:13.316Z,1516715053.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:13.331Z,1516715053.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:13.722Z,1516715053.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:13.741Z,1516715053.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:14.123Z,1516715054.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:14.138Z,1516715054.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:14.522Z,1516715054.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:14.541Z,1516715054.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:14.916Z,1516715054.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:14.934Z,1516715054.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:15.317Z,1516715055.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:15.332Z,1516715055.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:15.722Z,1516715055.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:15.741Z,1516715055.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:16.123Z,1516715056.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:16.138Z,1516715056.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:16.527Z,1516715056.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:16.549Z,1516715056.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:16.922Z,1516715056.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:16.945Z,1516715056.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:17.321Z,1516715057.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:17.336Z,1516715057.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:17.727Z,1516715057.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:17.749Z,1516715057.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:18.124Z,1516715058.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:18.151Z,1516715058.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:18.528Z,1516715058.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:18.542Z,1516715058.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:18.917Z,1516715058.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:18.943Z,1516715058.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:19.316Z,1516715059.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:19.336Z,1516715059.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:19.727Z,1516715059.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:19.746Z,1516715059.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:20.139Z,1516715060.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:20.154Z,1516715060.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:20.532Z,1516715060.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:20.553Z,1516715060.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:20.911Z,1516715060.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:20.942Z,1516715060.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:21.309Z,1516715061.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:21.343Z,1516715061.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:21.724Z,1516715061.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:21.750Z,1516715061.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:22.128Z,1516715062.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:22.151Z,1516715062.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:22.524Z,1516715062.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:22.559Z,1516715062.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:22.909Z,1516715062.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:22.938Z,1516715062.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:23.317Z,1516715063.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:23.345Z,1516715063.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:23.718Z,1516715063.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:23.763Z,1516715063.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:24.119Z,1516715064.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:24.160Z,1516715064.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:24.520Z,1516715064.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:24.556Z,1516715064.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:24.910Z,1516715064.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:24.945Z,1516715064.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:25.308Z,1516715065.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:25.345Z,1516715065.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:25.720Z,1516715065.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:25.756Z,1516715065.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:26.132Z,1516715066.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:26.162Z,1516715066.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:26.529Z,1516715066.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:26.557Z,1516715066.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:26.921Z,1516715066.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:26.957Z,1516715066.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:27.316Z,1516715067.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:27.332Z,1516715067.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:27.728Z,1516715067.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:27.760Z,1516715067.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:28.131Z,1516715068.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:28.164Z,1516715068.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:28.523Z,1516715068.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:28.538Z,1516715068.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:28.913Z,1516715068.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:28.940Z,1516715068.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:29.321Z,1516715069.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:29.336Z,1516715069.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:29.717Z,1516715069.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:29.732Z,1516715069.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:30.123Z,1516715070.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:30.146Z,1516715070.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:30.169Z,1516715070.169 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:44:30.528Z,1516715070.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:30.549Z,1516715070.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:30.928Z,1516715070.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:30.943Z,1516715070.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:31.308Z,1516715071.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:31.335Z,1516715071.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:31.712Z,1516715071.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:31.745Z,1516715071.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:32.109Z,1516715072.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:32.142Z,1516715072.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:32.508Z,1516715072.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:32.541Z,1516715072.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:32.927Z,1516715072.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:32.945Z,1516715072.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:33.332Z,1516715073.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:33.348Z,1516715073.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:33.728Z,1516715073.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:33.742Z,1516715073.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:34.108Z,1516715074.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:34.145Z,1516715074.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:34.508Z,1516715074.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:34.544Z,1516715074.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:34.906Z,1516715074.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:34.929Z,1516715074.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:35.309Z,1516715075.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:35.340Z,1516715075.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:35.712Z,1516715075.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:35.754Z,1516715075.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:36.120Z,1516715076.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:36.145Z,1516715076.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:36.523Z,1516715076.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:36.561Z,1516715076.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:36.927Z,1516715076.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:36.960Z,1516715076.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:37.316Z,1516715077.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:37.353Z,1516715077.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:37.716Z,1516715077.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:37.757Z,1516715077.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:38.117Z,1516715078.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:38.132Z,1516715078.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:38.516Z,1516715078.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:38.537Z,1516715078.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:38.928Z,1516715078.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:38.958Z,1516715078.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:39.331Z,1516715079.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:39.365Z,1516715079.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:39.728Z,1516715079.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:39.742Z,1516715079.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:40.114Z,1516715080.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:40.130Z,1516715080.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:40.517Z,1516715080.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:40.532Z,1516715080.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:40.912Z,1516715080.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:40.932Z,1516715080.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:41.313Z,1516715081.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:41.340Z,1516715081.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:41.717Z,1516715081.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:41.732Z,1516715081.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:42.127Z,1516715082.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:42.142Z,1516715082.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:42.526Z,1516715082.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:42.545Z,1516715082.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:42.927Z,1516715082.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:42.942Z,1516715082.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:43.320Z,1516715083.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:43.341Z,1516715083.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:43.716Z,1516715083.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:43.737Z,1516715083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:44.118Z,1516715084.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:44.133Z,1516715084.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:44.521Z,1516715084.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:44.536Z,1516715084.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:44.927Z,1516715084.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:44.942Z,1516715084.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:45.326Z,1516715085.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:45.349Z,1516715085.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:45.725Z,1516715085.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:45.745Z,1516715085.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:46.125Z,1516715086.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:46.140Z,1516715086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:46.517Z,1516715086.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:46.540Z,1516715086.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:46.913Z,1516715086.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:46.933Z,1516715086.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:47.312Z,1516715087.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:47.335Z,1516715087.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:47.725Z,1516715087.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:47.741Z,1516715087.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:48.127Z,1516715088.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:48.142Z,1516715088.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:48.530Z,1516715088.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:48.549Z,1516715088.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:48.931Z,1516715088.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:48.946Z,1516715088.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:49.325Z,1516715089.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:49.345Z,1516715089.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:49.721Z,1516715089.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:49.735Z,1516715089.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:50.113Z,1516715090.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:50.144Z,1516715090.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:50.508Z,1516715090.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:50.541Z,1516715090.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:50.936Z,1516715090.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:50.951Z,1516715090.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:51.335Z,1516715091.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:51.351Z,1516715091.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:51.724Z,1516715091.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:51.755Z,1516715091.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:52.108Z,1516715092.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:52.134Z,1516715092.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:52.511Z,1516715092.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:52.549Z,1516715092.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:52.910Z,1516715092.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:52.933Z,1516715092.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:53.309Z,1516715093.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:53.324Z,1516715093.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:53.709Z,1516715093.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:53.729Z,1516715093.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:54.132Z,1516715094.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:54.165Z,1516715094.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:54.543Z,1516715094.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:54.565Z,1516715094.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:54.932Z,1516715094.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:54.965Z,1516715094.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:55.312Z,1516715095.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:55.329Z,1516715095.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:55.717Z,1516715095.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:55.732Z,1516715095.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:56.126Z,1516715096.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:56.141Z,1516715096.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:56.518Z,1516715096.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:56.541Z,1516715096.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:56.922Z,1516715096.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:56.937Z,1516715096.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:57.324Z,1516715097.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:57.353Z,1516715097.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:57.728Z,1516715097.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:57.743Z,1516715097.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:58.125Z,1516715098.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:58.140Z,1516715098.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:44:58.526Z,1516715098.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:44:58.542Z,1516715098.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:01.624Z,1516715101.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:01.640Z,1516715101.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:01.764Z,1516715101.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:01.785Z,1516715101.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:02.117Z,1516715102.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:02.144Z,1516715102.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:02.531Z,1516715102.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:02.547Z,1516715102.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:02.914Z,1516715102.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:02.955Z,1516715102.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:03.319Z,1516715103.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:03.334Z,1516715103.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:03.700Z,1516715103.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:03.737Z,1516715103.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:04.118Z,1516715104.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:04.127Z,1516715104.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x54056 got:0x6466 2018-01-23T13:45:04.154Z,1516715104.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:04.502Z,1516715104.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:04.537Z,1516715104.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:04.930Z,1516715104.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:04.945Z,1516715104.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:05.327Z,1516715105.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:05.357Z,1516715105.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:05.713Z,1516715105.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:05.746Z,1516715105.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:06.103Z,1516715106.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:06.140Z,1516715106.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:06.503Z,1516715106.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:06.530Z,1516715106.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:06.536Z,1516715106.536 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:06.536Z,1516715106.536 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209 2018-01-23T13:45:06.536Z,1516715106.536 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:45:06.562Z,1516715106.562 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:45:06.900Z,1516715106.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:06.949Z,1516715106.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:06.962Z,1516715106.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:45:06.962Z,1516715106.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209 2018-01-23T13:45:07.301Z,1516715107.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:07.343Z,1516715107.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:07.344Z,1516715107.344 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:45:07.345Z,1516715107.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:45:07.345Z,1516715107.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:45:07.703Z,1516715107.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:07.718Z,1516715107.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:07.718Z,1516715107.718 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209 2018-01-23T13:45:07.718Z,1516715107.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:45:07.736Z,1516715107.736 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:07.736Z,1516715107.736 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 209 2018-01-23T13:45:07.736Z,1516715107.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:45:07.762Z,1516715107.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:45:07.762Z,1516715107.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:45:08.132Z,1516715108.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:08.160Z,1516715108.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:45:08.160Z,1516715108.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209 2018-01-23T13:45:08.160Z,1516715108.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:45:08.161Z,1516715108.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 209 2018-01-23T13:45:08.521Z,1516715108.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:08.565Z,1516715108.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:45:08.565Z,1516715108.565 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:45:08.565Z,1516715108.565 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:45:08.566Z,1516715108.566 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:45:08.566Z,1516715108.566 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:45:08.567Z,1516715108.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:45:08.917Z,1516715108.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:08.949Z,1516715108.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:45:08.950Z,1516715108.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:09.308Z,1516715109.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:09.322Z,1516715109.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:45:09.323Z,1516715109.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:09.707Z,1516715109.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:09.733Z,1516715109.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:45:09.734Z,1516715109.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:10.105Z,1516715110.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:10.150Z,1516715110.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:45:10.151Z,1516715110.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:10.516Z,1516715110.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:10.524Z,1516715110.524 [PNI_TCM](ERROR): CRC does not match. Expected:0x10331 got:0x22043 2018-01-23T13:45:10.561Z,1516715110.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:45:10.562Z,1516715110.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:10.917Z,1516715110.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:10.931Z,1516715110.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:45:10.932Z,1516715110.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:11.316Z,1516715111.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:11.330Z,1516715111.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:45:11.331Z,1516715111.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:11.716Z,1516715111.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:11.745Z,1516715111.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:45:11.746Z,1516715111.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:12.107Z,1516715112.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:12.136Z,1516715112.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:45:12.137Z,1516715112.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:12.504Z,1516715112.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:12.521Z,1516715112.521 [PNI_TCM](ERROR): CRC does not match. Expected:0x34099 got:0x49717 2018-01-23T13:45:12.562Z,1516715112.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:45:12.563Z,1516715112.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:12.906Z,1516715112.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:12.933Z,1516715112.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:45:12.934Z,1516715112.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:13.301Z,1516715113.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:13.336Z,1516715113.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:45:13.337Z,1516715113.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:13.700Z,1516715113.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:13.731Z,1516715113.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:45:13.732Z,1516715113.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:14.117Z,1516715114.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:14.145Z,1516715114.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:45:14.145Z,1516715114.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:14.527Z,1516715114.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:14.541Z,1516715114.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:45:14.542Z,1516715114.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:14.916Z,1516715114.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:14.970Z,1516715114.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T13:45:14.971Z,1516715114.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:15.300Z,1516715115.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:15.344Z,1516715115.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:45:15.345Z,1516715115.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:15.705Z,1516715115.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:15.728Z,1516715115.728 [PNI_TCM](ERROR): CRC does not match. Expected:0x59694 got:0x29212 2018-01-23T13:45:15.745Z,1516715115.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:45:15.746Z,1516715115.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:16.104Z,1516715116.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:16.130Z,1516715116.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:45:16.131Z,1516715116.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:16.500Z,1516715116.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:16.541Z,1516715116.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:45:16.542Z,1516715116.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:16.919Z,1516715116.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:16.942Z,1516715116.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:45:16.943Z,1516715116.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:17.326Z,1516715117.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:17.342Z,1516715117.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:45:17.343Z,1516715117.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:17.721Z,1516715117.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:17.735Z,1516715117.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:45:17.736Z,1516715117.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:18.117Z,1516715118.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:18.142Z,1516715118.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:45:18.143Z,1516715118.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:18.505Z,1516715118.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:18.534Z,1516715118.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:45:18.535Z,1516715118.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:18.901Z,1516715118.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:18.932Z,1516715118.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:45:18.933Z,1516715118.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:19.302Z,1516715119.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:19.332Z,1516715119.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:45:19.333Z,1516715119.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:19.700Z,1516715119.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:19.734Z,1516715119.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:45:19.735Z,1516715119.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:20.119Z,1516715120.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:20.138Z,1516715120.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:45:20.139Z,1516715120.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:20.526Z,1516715120.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:20.551Z,1516715120.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:45:20.551Z,1516715120.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:20.917Z,1516715120.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:20.940Z,1516715120.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:45:20.941Z,1516715120.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:21.300Z,1516715121.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:21.332Z,1516715121.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:45:21.334Z,1516715121.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:21.700Z,1516715121.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:21.737Z,1516715121.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:45:21.738Z,1516715121.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:22.101Z,1516715122.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:22.136Z,1516715122.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:45:22.137Z,1516715122.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:22.500Z,1516715122.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:22.534Z,1516715122.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:45:22.536Z,1516715122.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:22.915Z,1516715122.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:22.948Z,1516715122.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:45:22.949Z,1516715122.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:23.329Z,1516715123.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:23.346Z,1516715123.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:45:23.348Z,1516715123.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:23.711Z,1516715123.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:23.749Z,1516715123.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:45:23.750Z,1516715123.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:24.109Z,1516715124.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:24.148Z,1516715124.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:45:24.149Z,1516715124.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:24.512Z,1516715124.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:24.553Z,1516715124.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:45:24.554Z,1516715124.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:24.912Z,1516715124.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:24.957Z,1516715124.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:45:24.958Z,1516715124.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:25.313Z,1516715125.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:25.356Z,1516715125.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:45:25.357Z,1516715125.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:25.701Z,1516715125.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:25.722Z,1516715125.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:45:25.724Z,1516715125.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:26.119Z,1516715126.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:26.156Z,1516715126.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:45:26.157Z,1516715126.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:26.523Z,1516715126.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:26.557Z,1516715126.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:45:26.558Z,1516715126.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:26.912Z,1516715126.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:26.929Z,1516715126.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:45:26.931Z,1516715126.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:27.306Z,1516715127.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:27.329Z,1516715127.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:45:27.330Z,1516715127.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:27.708Z,1516715127.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:27.723Z,1516715127.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:28.106Z,1516715128.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:28.129Z,1516715128.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:28.508Z,1516715128.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:28.523Z,1516715128.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:28.914Z,1516715128.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:28.933Z,1516715128.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:29.315Z,1516715129.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:29.360Z,1516715129.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:29.713Z,1516715129.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:29.733Z,1516715129.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:30.105Z,1516715130.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:30.129Z,1516715130.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:30.508Z,1516715130.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:30.527Z,1516715130.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:30.908Z,1516715130.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:30.923Z,1516715130.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:31.305Z,1516715131.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:31.332Z,1516715131.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:31.704Z,1516715131.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:31.727Z,1516715131.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:32.119Z,1516715132.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:32.137Z,1516715132.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:32.523Z,1516715132.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:32.538Z,1516715132.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:32.918Z,1516715132.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:32.933Z,1516715132.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:33.304Z,1516715133.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:33.326Z,1516715133.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:33.713Z,1516715133.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:33.733Z,1516715133.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:34.105Z,1516715134.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:34.128Z,1516715134.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:34.504Z,1516715134.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:34.529Z,1516715134.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:34.920Z,1516715134.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:34.936Z,1516715134.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:35.323Z,1516715135.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:35.341Z,1516715135.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:35.719Z,1516715135.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:35.734Z,1516715135.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:36.122Z,1516715136.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:36.137Z,1516715136.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:36.517Z,1516715136.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:36.537Z,1516715136.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:36.925Z,1516715136.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:36.943Z,1516715136.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:37.302Z,1516715137.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:37.330Z,1516715137.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:37.701Z,1516715137.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:37.733Z,1516715137.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:38.115Z,1516715138.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:38.138Z,1516715138.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:38.520Z,1516715138.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:38.550Z,1516715138.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:38.912Z,1516715138.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:38.949Z,1516715138.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:39.304Z,1516715139.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:39.337Z,1516715139.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:39.701Z,1516715139.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:39.728Z,1516715139.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:40.109Z,1516715140.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:40.148Z,1516715140.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:40.505Z,1516715140.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:40.543Z,1516715140.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:40.915Z,1516715140.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:40.953Z,1516715140.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:41.329Z,1516715141.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:41.345Z,1516715141.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:41.735Z,1516715141.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:41.754Z,1516715141.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:42.102Z,1516715142.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:42.148Z,1516715142.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:42.502Z,1516715142.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:42.545Z,1516715142.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:42.910Z,1516715142.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:42.941Z,1516715142.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:43.311Z,1516715143.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:43.326Z,1516715143.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:43.705Z,1516715143.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:43.721Z,1516715143.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:44.117Z,1516715144.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:44.132Z,1516715144.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:44.516Z,1516715144.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:44.532Z,1516715144.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:44.914Z,1516715144.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:44.930Z,1516715144.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:45.308Z,1516715145.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:45.324Z,1516715145.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:45.709Z,1516715145.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:45.724Z,1516715145.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:46.105Z,1516715146.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:46.133Z,1516715146.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:46.512Z,1516715146.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:46.528Z,1516715146.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:46.919Z,1516715146.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:46.935Z,1516715146.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:47.322Z,1516715147.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:47.338Z,1516715147.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:47.718Z,1516715147.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:47.733Z,1516715147.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:48.110Z,1516715148.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:48.132Z,1516715148.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:48.508Z,1516715148.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:48.527Z,1516715148.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:48.908Z,1516715148.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:48.930Z,1516715148.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:49.310Z,1516715149.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:49.328Z,1516715149.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:49.704Z,1516715149.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:49.726Z,1516715149.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:50.118Z,1516715150.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:50.133Z,1516715150.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:50.522Z,1516715150.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:50.544Z,1516715150.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:50.923Z,1516715150.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:50.937Z,1516715150.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:51.300Z,1516715151.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:51.333Z,1516715151.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:51.699Z,1516715151.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:51.735Z,1516715151.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:52.101Z,1516715152.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:52.128Z,1516715152.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:52.500Z,1516715152.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:52.532Z,1516715152.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:52.920Z,1516715152.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:52.934Z,1516715152.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:53.323Z,1516715153.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:53.338Z,1516715153.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:53.716Z,1516715153.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:53.743Z,1516715153.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:54.105Z,1516715154.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:54.132Z,1516715154.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:54.504Z,1516715154.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:54.530Z,1516715154.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:54.916Z,1516715154.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:54.937Z,1516715154.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:55.323Z,1516715155.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:55.345Z,1516715155.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:55.719Z,1516715155.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:55.734Z,1516715155.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:56.101Z,1516715156.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:56.133Z,1516715156.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:56.521Z,1516715156.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:56.535Z,1516715156.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:56.920Z,1516715156.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:56.935Z,1516715156.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:57.320Z,1516715157.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:57.347Z,1516715157.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:57.723Z,1516715157.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:57.738Z,1516715157.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:57.741Z,1516715157.741 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:45:57.741Z,1516715157.741 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:45:57.741Z,1516715157.741 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:45:57.741Z,1516715157.741 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:45:58.101Z,1516715158.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:58.128Z,1516715158.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:58.136Z,1516715158.136 [Default:CheckIn:D] Stopped 2018-01-23T13:45:58.136Z,1516715158.136 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:45:58.500Z,1516715158.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:58.541Z,1516715158.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:45:58.544Z,1516715158.544 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 628.101237 min 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn:E] Stopped 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn] Stopped 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn](INFO): Running loop #62 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn] Running Loop=62 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:45:58.545Z,1516715158.545 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:45:58.915Z,1516715158.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:45:58.942Z,1516715158.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:02.032Z,1516715162.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:02.048Z,1516715162.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:02.156Z,1516715162.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:02.198Z,1516715162.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:02.496Z,1516715162.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:02.511Z,1516715162.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:02.901Z,1516715162.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:02.916Z,1516715162.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:03.296Z,1516715163.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:03.314Z,1516715163.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:03.696Z,1516715163.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:03.711Z,1516715163.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:04.102Z,1516715164.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:04.124Z,1516715164.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:04.502Z,1516715164.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:04.521Z,1516715164.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:04.904Z,1516715164.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:04.918Z,1516715164.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:05.300Z,1516715165.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:05.321Z,1516715165.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:05.700Z,1516715165.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:05.715Z,1516715165.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:06.093Z,1516715166.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:06.120Z,1516715166.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:06.501Z,1516715166.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:06.516Z,1516715166.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:06.903Z,1516715166.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:06.931Z,1516715166.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:07.310Z,1516715167.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:07.329Z,1516715167.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:07.708Z,1516715167.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:07.723Z,1516715167.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:08.089Z,1516715168.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:08.116Z,1516715168.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:08.488Z,1516715168.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:08.521Z,1516715168.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:08.908Z,1516715168.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:08.923Z,1516715168.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:09.311Z,1516715169.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:09.326Z,1516715169.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:09.712Z,1516715169.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:09.737Z,1516715169.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:10.100Z,1516715170.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:10.131Z,1516715170.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:10.490Z,1516715170.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:10.522Z,1516715170.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:10.913Z,1516715170.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:10.937Z,1516715170.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:11.310Z,1516715171.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:11.351Z,1516715171.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:11.710Z,1516715171.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:11.741Z,1516715171.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:12.103Z,1516715172.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:12.151Z,1516715172.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:12.503Z,1516715172.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:12.541Z,1516715172.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:12.906Z,1516715172.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:12.929Z,1516715172.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:13.315Z,1516715173.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:13.350Z,1516715173.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:13.726Z,1516715173.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:13.745Z,1516715173.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:14.118Z,1516715174.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:14.133Z,1516715174.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:14.495Z,1516715174.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:14.530Z,1516715174.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:14.906Z,1516715174.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:14.942Z,1516715174.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:15.310Z,1516715175.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:15.343Z,1516715175.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:15.718Z,1516715175.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:15.749Z,1516715175.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:16.112Z,1516715176.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:16.152Z,1516715176.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:16.499Z,1516715176.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:16.522Z,1516715176.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:16.906Z,1516715176.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:16.965Z,1516715176.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:17.310Z,1516715177.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:17.333Z,1516715177.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:17.715Z,1516715177.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:17.734Z,1516715177.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:18.094Z,1516715178.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:18.126Z,1516715178.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:18.496Z,1516715178.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:18.537Z,1516715178.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:18.906Z,1516715178.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:18.942Z,1516715178.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:19.349Z,1516715179.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:19.384Z,1516715179.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:19.718Z,1516715179.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:19.793Z,1516715179.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:20.101Z,1516715180.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:20.137Z,1516715180.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:20.493Z,1516715180.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:20.546Z,1516715180.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:20.916Z,1516715180.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:20.949Z,1516715180.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:21.317Z,1516715181.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:21.373Z,1516715181.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:21.730Z,1516715181.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:21.754Z,1516715181.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:22.097Z,1516715182.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:22.145Z,1516715182.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:22.496Z,1516715182.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:22.528Z,1516715182.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:22.935Z,1516715182.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:22.971Z,1516715182.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:23.314Z,1516715183.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:23.342Z,1516715183.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:23.710Z,1516715183.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:23.742Z,1516715183.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:24.094Z,1516715184.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:24.129Z,1516715184.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:24.495Z,1516715184.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:24.537Z,1516715184.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:24.896Z,1516715184.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:24.941Z,1516715184.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:25.308Z,1516715185.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:25.348Z,1516715185.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:25.712Z,1516715185.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:25.758Z,1516715185.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:26.109Z,1516715186.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:26.129Z,1516715186.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:26.515Z,1516715186.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:26.538Z,1516715186.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:26.890Z,1516715186.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:26.934Z,1516715186.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:27.291Z,1516715187.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:27.327Z,1516715187.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:27.694Z,1516715187.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:27.737Z,1516715187.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:28.105Z,1516715188.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:28.171Z,1516715188.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:28.514Z,1516715188.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:28.545Z,1516715188.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:28.913Z,1516715188.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:28.967Z,1516715188.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:29.299Z,1516715189.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:29.352Z,1516715189.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:29.707Z,1516715189.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:29.759Z,1516715189.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:30.098Z,1516715190.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:30.126Z,1516715190.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:30.489Z,1516715190.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:30.528Z,1516715190.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:30.892Z,1516715190.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:30.918Z,1516715190.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:31.315Z,1516715191.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:31.329Z,1516715191.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:31.711Z,1516715191.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:31.726Z,1516715191.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:32.108Z,1516715192.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:32.123Z,1516715192.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:32.488Z,1516715192.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:32.521Z,1516715192.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:32.892Z,1516715192.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:32.920Z,1516715192.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:33.293Z,1516715193.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:33.320Z,1516715193.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:33.687Z,1516715193.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:33.721Z,1516715193.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:34.113Z,1516715194.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:34.128Z,1516715194.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:34.513Z,1516715194.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:34.545Z,1516715194.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:34.899Z,1516715194.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:34.925Z,1516715194.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:35.288Z,1516715195.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:35.326Z,1516715195.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:35.688Z,1516715195.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:35.725Z,1516715195.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:36.088Z,1516715196.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:36.124Z,1516715196.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:36.489Z,1516715196.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:36.526Z,1516715196.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:36.888Z,1516715196.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:36.924Z,1516715196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:37.299Z,1516715197.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:37.335Z,1516715197.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:37.712Z,1516715197.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:37.727Z,1516715197.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:38.099Z,1516715198.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:38.134Z,1516715198.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:38.488Z,1516715198.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:38.524Z,1516715198.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:38.888Z,1516715198.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:38.926Z,1516715198.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:39.293Z,1516715199.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:39.325Z,1516715199.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:39.688Z,1516715199.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:39.724Z,1516715199.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:40.099Z,1516715200.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:40.134Z,1516715200.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:40.516Z,1516715200.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:40.531Z,1516715200.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:40.899Z,1516715200.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:40.937Z,1516715200.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:41.292Z,1516715201.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:41.333Z,1516715201.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:41.693Z,1516715201.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:41.728Z,1516715201.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:42.088Z,1516715202.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:42.105Z,1516715202.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:42.489Z,1516715202.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:42.509Z,1516715202.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:42.892Z,1516715202.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:42.929Z,1516715202.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:43.307Z,1516715203.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:43.331Z,1516715203.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:43.707Z,1516715203.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:43.733Z,1516715203.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:44.107Z,1516715204.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:44.131Z,1516715204.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:44.500Z,1516715204.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:44.534Z,1516715204.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:44.893Z,1516715204.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:44.912Z,1516715204.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:45.297Z,1516715205.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:45.312Z,1516715205.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:45.696Z,1516715205.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:45.717Z,1516715205.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:46.111Z,1516715206.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:46.137Z,1516715206.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:46.511Z,1516715206.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:46.535Z,1516715206.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:46.911Z,1516715206.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:46.935Z,1516715206.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:47.300Z,1516715207.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:47.315Z,1516715207.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:47.693Z,1516715207.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:47.716Z,1516715207.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:48.097Z,1516715208.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:48.113Z,1516715208.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:48.497Z,1516715208.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:48.511Z,1516715208.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:48.895Z,1516715208.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:48.910Z,1516715208.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:49.299Z,1516715209.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:49.314Z,1516715209.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:49.703Z,1516715209.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:49.718Z,1516715209.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:50.100Z,1516715210.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:50.114Z,1516715210.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:50.498Z,1516715210.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:50.513Z,1516715210.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:50.896Z,1516715210.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:50.921Z,1516715210.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:51.299Z,1516715211.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:51.313Z,1516715211.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:51.694Z,1516715211.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:51.725Z,1516715211.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:52.103Z,1516715212.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:52.118Z,1516715212.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:52.507Z,1516715212.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:52.522Z,1516715212.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:52.904Z,1516715212.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:52.918Z,1516715212.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:53.299Z,1516715213.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:53.314Z,1516715213.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:53.696Z,1516715213.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:53.718Z,1516715213.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:54.098Z,1516715214.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:54.117Z,1516715214.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:54.501Z,1516715214.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:54.515Z,1516715214.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:54.898Z,1516715214.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:54.913Z,1516715214.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:55.308Z,1516715215.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:55.323Z,1516715215.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:55.709Z,1516715215.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:55.728Z,1516715215.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:56.107Z,1516715216.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:56.130Z,1516715216.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:56.493Z,1516715216.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:56.521Z,1516715216.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:56.890Z,1516715216.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:56.925Z,1516715216.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:57.291Z,1516715217.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:57.319Z,1516715217.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:57.689Z,1516715217.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:57.730Z,1516715217.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:58.103Z,1516715218.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:58.131Z,1516715218.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:58.506Z,1516715218.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:58.545Z,1516715218.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:58.914Z,1516715218.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:58.929Z,1516715218.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:46:59.289Z,1516715219.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:46:59.329Z,1516715219.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:02.503Z,1516715222.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:02.518Z,1516715222.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:02.625Z,1516715222.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:02.657Z,1516715222.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:03.002Z,1516715223.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:03.024Z,1516715223.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:03.412Z,1516715223.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:03.433Z,1516715223.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:03.804Z,1516715223.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:03.824Z,1516715223.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:04.182Z,1516715224.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:04.211Z,1516715224.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:04.578Z,1516715224.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:04.616Z,1516715224.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:04.996Z,1516715224.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:05.027Z,1516715225.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:05.399Z,1516715225.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:05.421Z,1516715225.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:05.788Z,1516715225.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:05.820Z,1516715225.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:06.179Z,1516715226.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:06.194Z,1516715226.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:06.583Z,1516715226.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:06.598Z,1516715226.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:07.000Z,1516715227.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:07.032Z,1516715227.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:07.397Z,1516715227.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:07.424Z,1516715227.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:07.788Z,1516715227.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:07.804Z,1516715227.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:08.177Z,1516715228.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:08.221Z,1516715228.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:08.577Z,1516715228.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:08.609Z,1516715228.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:08.987Z,1516715228.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:09.018Z,1516715229.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:09.401Z,1516715229.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:09.418Z,1516715229.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:09.787Z,1516715229.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:09.825Z,1516715229.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:10.181Z,1516715230.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:10.213Z,1516715230.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:10.576Z,1516715230.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:10.591Z,1516715230.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:10.995Z,1516715230.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:11.018Z,1516715231.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:11.409Z,1516715231.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:11.425Z,1516715231.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:11.794Z,1516715231.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:11.826Z,1516715231.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:12.186Z,1516715232.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:12.201Z,1516715232.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:12.587Z,1516715232.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:12.625Z,1516715232.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:12.999Z,1516715232.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:13.032Z,1516715233.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:13.395Z,1516715233.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:13.410Z,1516715233.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:13.791Z,1516715233.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:13.825Z,1516715233.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:14.177Z,1516715234.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:14.221Z,1516715234.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:14.582Z,1516715234.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:14.597Z,1516715234.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:14.996Z,1516715234.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:15.019Z,1516715235.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:15.395Z,1516715235.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:15.421Z,1516715235.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:15.795Z,1516715235.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:15.818Z,1516715235.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:16.189Z,1516715236.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:16.220Z,1516715236.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:16.584Z,1516715236.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:16.599Z,1516715236.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:16.995Z,1516715236.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:17.026Z,1516715237.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:17.399Z,1516715237.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:17.430Z,1516715237.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:17.798Z,1516715237.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:17.813Z,1516715237.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:18.184Z,1516715238.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:18.203Z,1516715238.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:18.581Z,1516715238.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:18.600Z,1516715238.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:18.995Z,1516715238.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:19.016Z,1516715239.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:19.395Z,1516715239.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:19.410Z,1516715239.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:19.794Z,1516715239.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:19.809Z,1516715239.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:20.185Z,1516715240.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:20.200Z,1516715240.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:20.581Z,1516715240.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:20.604Z,1516715240.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:20.980Z,1516715240.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:20.998Z,1516715240.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:21.393Z,1516715241.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:21.415Z,1516715241.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:21.799Z,1516715241.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:21.814Z,1516715241.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:22.196Z,1516715242.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:22.211Z,1516715242.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:22.577Z,1516715242.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:22.610Z,1516715242.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:22.977Z,1516715242.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:23.013Z,1516715243.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:23.381Z,1516715243.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:23.408Z,1516715243.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:23.776Z,1516715243.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:23.813Z,1516715243.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:24.200Z,1516715244.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:24.215Z,1516715244.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:24.596Z,1516715244.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:24.622Z,1516715244.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:24.995Z,1516715244.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:25.021Z,1516715245.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:25.377Z,1516715245.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:25.408Z,1516715245.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:25.777Z,1516715245.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:25.808Z,1516715245.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:26.177Z,1516715246.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:26.192Z,1516715246.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:26.578Z,1516715246.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:26.593Z,1516715246.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:26.984Z,1516715246.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:27.021Z,1516715247.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:27.395Z,1516715247.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:27.430Z,1516715247.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:27.799Z,1516715247.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:27.823Z,1516715247.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:28.195Z,1516715248.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:28.226Z,1516715248.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:28.586Z,1516715248.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:28.600Z,1516715248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:28.986Z,1516715248.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:29.001Z,1516715249.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:29.384Z,1516715249.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:29.399Z,1516715249.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:29.781Z,1516715249.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:29.808Z,1516715249.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:30.199Z,1516715250.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:30.230Z,1516715250.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:30.603Z,1516715250.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:30.626Z,1516715250.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:30.987Z,1516715250.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:31.008Z,1516715251.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:31.386Z,1516715251.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:31.401Z,1516715251.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:31.782Z,1516715251.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:31.805Z,1516715251.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:32.186Z,1516715252.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:32.204Z,1516715252.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:32.584Z,1516715252.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:32.599Z,1516715252.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:32.990Z,1516715252.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:33.005Z,1516715253.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:33.399Z,1516715253.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:33.432Z,1516715253.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:33.799Z,1516715253.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:33.830Z,1516715253.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:34.188Z,1516715254.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:34.203Z,1516715254.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:34.584Z,1516715254.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:34.610Z,1516715254.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:34.983Z,1516715254.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:35.002Z,1516715255.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:35.384Z,1516715255.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:35.403Z,1516715255.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:35.785Z,1516715255.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:35.804Z,1516715255.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:36.194Z,1516715256.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:36.209Z,1516715256.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:36.595Z,1516715256.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:36.610Z,1516715256.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:36.996Z,1516715256.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:37.010Z,1516715257.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:37.385Z,1516715257.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:37.400Z,1516715257.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:37.778Z,1516715257.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:37.812Z,1516715257.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:38.186Z,1516715258.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:38.201Z,1516715258.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:38.584Z,1516715258.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:38.604Z,1516715258.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:38.978Z,1516715258.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:39.012Z,1516715259.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:39.395Z,1516715259.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:39.410Z,1516715259.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:39.795Z,1516715259.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:39.810Z,1516715259.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:40.195Z,1516715260.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:40.210Z,1516715260.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:40.587Z,1516715260.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:40.601Z,1516715260.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:40.986Z,1516715260.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:41.001Z,1516715261.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:41.381Z,1516715261.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:41.409Z,1516715261.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:41.792Z,1516715261.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:41.807Z,1516715261.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:42.200Z,1516715262.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:42.215Z,1516715262.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:42.600Z,1516715262.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:42.615Z,1516715262.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:43.001Z,1516715263.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:43.016Z,1516715263.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:43.394Z,1516715263.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:43.410Z,1516715263.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:43.794Z,1516715263.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:43.810Z,1516715263.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:44.186Z,1516715264.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:44.210Z,1516715264.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:44.576Z,1516715264.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:44.600Z,1516715264.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:44.978Z,1516715264.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:45.018Z,1516715265.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:45.389Z,1516715265.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:45.421Z,1516715265.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:45.796Z,1516715265.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:45.825Z,1516715265.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:46.207Z,1516715266.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:46.229Z,1516715266.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:46.582Z,1516715266.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:46.620Z,1516715266.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:46.978Z,1516715266.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:47.063Z,1516715267.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:47.389Z,1516715267.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:47.419Z,1516715267.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:47.789Z,1516715267.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:47.821Z,1516715267.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:48.188Z,1516715268.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:48.215Z,1516715268.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:48.611Z,1516715268.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:48.626Z,1516715268.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:48.995Z,1516715268.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:49.027Z,1516715269.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:49.382Z,1516715269.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:49.397Z,1516715269.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:49.788Z,1516715269.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:49.829Z,1516715269.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:50.184Z,1516715270.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:50.199Z,1516715270.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:50.583Z,1516715270.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:50.598Z,1516715270.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:50.981Z,1516715270.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:51.004Z,1516715271.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:51.387Z,1516715271.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:51.402Z,1516715271.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:51.791Z,1516715271.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:51.806Z,1516715271.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:52.188Z,1516715272.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:52.202Z,1516715272.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:52.584Z,1516715272.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:52.610Z,1516715272.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:52.980Z,1516715272.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:53.003Z,1516715273.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:53.380Z,1516715273.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:53.403Z,1516715273.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:53.785Z,1516715273.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:53.800Z,1516715273.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:54.192Z,1516715274.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:54.219Z,1516715274.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:54.602Z,1516715274.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:54.625Z,1516715274.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:54.000Z,1516715275.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:55.014Z,1516715275.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:55.387Z,1516715275.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:55.407Z,1516715275.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:55.776Z,1516715275.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:55.812Z,1516715275.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:56.177Z,1516715276.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:56.211Z,1516715276.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:56.575Z,1516715276.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:56.602Z,1516715276.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:56.976Z,1516715276.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:57.009Z,1516715277.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:57.395Z,1516715277.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:57.410Z,1516715277.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:57.798Z,1516715277.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:57.813Z,1516715277.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:58.192Z,1516715278.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:58.214Z,1516715278.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:58.577Z,1516715278.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:58.610Z,1516715278.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:58.975Z,1516715278.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:59.006Z,1516715279.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:47:59.382Z,1516715279.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:47:59.413Z,1516715279.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:02.475Z,1516715282.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:02.490Z,1516715282.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:02.608Z,1516715282.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:02.654Z,1516715282.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:02.991Z,1516715282.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:03.021Z,1516715283.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:03.387Z,1516715283.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:03.413Z,1516715283.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:03.773Z,1516715283.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:03.793Z,1516715283.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:04.170Z,1516715284.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:04.185Z,1516715284.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:04.571Z,1516715284.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:04.586Z,1516715284.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:04.970Z,1516715284.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:04.985Z,1516715284.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:05.383Z,1516715285.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:05.398Z,1516715285.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:05.779Z,1516715285.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:05.794Z,1516715285.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:06.176Z,1516715286.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:06.191Z,1516715286.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:06.572Z,1516715286.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:06.587Z,1516715286.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:06.973Z,1516715286.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:06.988Z,1516715286.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:07.378Z,1516715287.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:07.393Z,1516715287.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:07.396Z,1516715287.396 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:07.396Z,1516715287.396 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210 2018-01-23T13:48:07.396Z,1516715287.396 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:48:07.428Z,1516715287.428 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:48:07.774Z,1516715287.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:07.794Z,1516715287.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:07.818Z,1516715287.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:48:07.823Z,1516715287.823 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210 2018-01-23T13:48:08.187Z,1516715288.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:08.202Z,1516715288.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:08.203Z,1516715288.203 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:48:08.204Z,1516715288.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:48:08.204Z,1516715288.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:48:08.580Z,1516715288.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:08.607Z,1516715288.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:08.607Z,1516715288.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210 2018-01-23T13:48:08.607Z,1516715288.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:48:08.609Z,1516715288.609 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:08.609Z,1516715288.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 210 2018-01-23T13:48:08.609Z,1516715288.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:48:08.634Z,1516715288.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:48:08.639Z,1516715288.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:48:08.984Z,1516715288.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:09.016Z,1516715289.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:48:09.016Z,1516715289.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210 2018-01-23T13:48:09.017Z,1516715289.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:48:09.017Z,1516715289.017 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 210 2018-01-23T13:48:09.365Z,1516715289.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:09.397Z,1516715289.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:48:09.398Z,1516715289.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:48:09.398Z,1516715289.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:48:09.398Z,1516715289.398 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:48:09.399Z,1516715289.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:48:09.399Z,1516715289.399 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:48:09.765Z,1516715289.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:09.788Z,1516715289.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:48:09.789Z,1516715289.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:10.165Z,1516715290.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:10.196Z,1516715290.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:48:10.197Z,1516715290.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:10.566Z,1516715290.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:10.600Z,1516715290.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:48:10.601Z,1516715290.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:10.963Z,1516715290.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:10.977Z,1516715290.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:48:10.978Z,1516715290.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:11.379Z,1516715291.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:11.405Z,1516715291.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T13:48:11.406Z,1516715291.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:11.779Z,1516715291.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:11.814Z,1516715291.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T13:48:11.815Z,1516715291.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:12.176Z,1516715292.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:12.202Z,1516715292.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T13:48:12.207Z,1516715292.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:12.572Z,1516715292.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:12.612Z,1516715292.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T13:48:12.613Z,1516715292.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:12.972Z,1516715292.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:12.987Z,1516715292.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T13:48:12.988Z,1516715292.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:13.372Z,1516715293.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:13.386Z,1516715293.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T13:48:13.387Z,1516715293.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:13.771Z,1516715293.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:13.786Z,1516715293.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:48:13.787Z,1516715293.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:14.183Z,1516715294.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:14.198Z,1516715294.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:48:14.211Z,1516715294.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:14.576Z,1516715294.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:14.590Z,1516715294.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:48:14.591Z,1516715294.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:14.979Z,1516715294.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:14.994Z,1516715294.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:48:14.995Z,1516715294.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:15.374Z,1516715295.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:15.388Z,1516715295.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:48:15.389Z,1516715295.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:15.774Z,1516715295.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:15.792Z,1516715295.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:48:15.793Z,1516715295.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:16.173Z,1516715296.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:16.188Z,1516715296.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:48:16.189Z,1516715296.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:16.578Z,1516715296.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:16.593Z,1516715296.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:48:16.594Z,1516715296.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:16.975Z,1516715296.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:16.989Z,1516715296.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:48:16.990Z,1516715296.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:17.391Z,1516715297.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:17.421Z,1516715297.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:48:17.422Z,1516715297.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:17.780Z,1516715297.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:17.794Z,1516715297.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:48:17.795Z,1516715297.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:18.176Z,1516715298.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:18.191Z,1516715298.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:48:18.192Z,1516715298.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:18.570Z,1516715298.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:18.590Z,1516715298.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:48:18.595Z,1516715298.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:18.975Z,1516715298.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:18.990Z,1516715298.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:48:18.991Z,1516715298.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:19.374Z,1516715299.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:19.390Z,1516715299.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:48:19.391Z,1516715299.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:19.773Z,1516715299.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:19.789Z,1516715299.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:48:19.790Z,1516715299.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:20.179Z,1516715300.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:20.195Z,1516715300.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:48:20.196Z,1516715300.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:20.578Z,1516715300.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:20.594Z,1516715300.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:48:20.595Z,1516715300.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:20.979Z,1516715300.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:20.994Z,1516715300.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:48:20.996Z,1516715300.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:21.373Z,1516715301.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:21.399Z,1516715301.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:48:21.400Z,1516715301.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:21.774Z,1516715301.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:21.789Z,1516715301.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:48:21.790Z,1516715301.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:22.178Z,1516715302.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:22.193Z,1516715302.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:48:22.194Z,1516715302.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:22.576Z,1516715302.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:22.590Z,1516715302.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:48:22.591Z,1516715302.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:22.975Z,1516715302.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:22.989Z,1516715302.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:48:22.990Z,1516715302.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:23.380Z,1516715303.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:23.394Z,1516715303.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:48:23.395Z,1516715303.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:23.780Z,1516715303.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:23.800Z,1516715303.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:48:23.801Z,1516715303.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:24.179Z,1516715304.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:24.193Z,1516715304.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:48:24.194Z,1516715304.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:24.569Z,1516715304.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:24.604Z,1516715304.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:48:24.605Z,1516715304.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:24.974Z,1516715304.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:24.989Z,1516715304.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:48:24.990Z,1516715304.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:25.373Z,1516715305.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:25.388Z,1516715305.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:48:25.389Z,1516715305.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:25.773Z,1516715305.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:25.788Z,1516715305.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:48:25.789Z,1516715305.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:26.179Z,1516715306.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:26.200Z,1516715306.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:48:26.201Z,1516715306.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:26.578Z,1516715306.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:26.600Z,1516715306.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:48:26.601Z,1516715306.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:26.982Z,1516715306.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:27.008Z,1516715307.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:48:27.009Z,1516715307.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:27.374Z,1516715307.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:27.388Z,1516715307.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:48:27.389Z,1516715307.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:27.769Z,1516715307.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:27.791Z,1516715307.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:48:27.792Z,1516715307.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:28.172Z,1516715308.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:28.191Z,1516715308.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:48:28.192Z,1516715308.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:28.575Z,1516715308.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:28.596Z,1516715308.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:48:28.597Z,1516715308.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:28.967Z,1516715308.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:28.990Z,1516715308.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:29.384Z,1516715309.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:29.411Z,1516715309.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:29.788Z,1516715309.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:29.803Z,1516715309.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:30.180Z,1516715310.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:30.207Z,1516715310.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:30.572Z,1516715310.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:30.599Z,1516715310.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:30.968Z,1516715310.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:30.996Z,1516715310.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:31.366Z,1516715311.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:31.397Z,1516715311.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:31.768Z,1516715311.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:31.801Z,1516715311.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:32.186Z,1516715312.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:32.213Z,1516715312.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:32.579Z,1516715312.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:32.602Z,1516715312.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:32.984Z,1516715312.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:33.015Z,1516715313.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:33.365Z,1516715313.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:33.398Z,1516715313.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:33.765Z,1516715313.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:33.797Z,1516715313.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:34.165Z,1516715314.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:34.196Z,1516715314.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:34.565Z,1516715314.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:34.596Z,1516715314.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:34.963Z,1516715314.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:34.978Z,1516715314.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:35.379Z,1516715315.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:35.406Z,1516715315.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:35.779Z,1516715315.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:35.814Z,1516715315.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:36.175Z,1516715316.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:36.206Z,1516715316.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:36.572Z,1516715316.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:36.613Z,1516715316.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:36.972Z,1516715316.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:36.987Z,1516715316.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:37.371Z,1516715317.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:37.393Z,1516715317.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:37.772Z,1516715317.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:37.787Z,1516715317.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:38.179Z,1516715318.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:38.194Z,1516715318.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:38.575Z,1516715318.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:38.590Z,1516715318.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:38.979Z,1516715318.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:38.994Z,1516715318.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:39.369Z,1516715319.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:39.405Z,1516715319.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:39.773Z,1516715319.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:39.793Z,1516715319.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:40.181Z,1516715320.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:40.196Z,1516715320.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:40.575Z,1516715320.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:40.590Z,1516715320.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:40.973Z,1516715320.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:40.992Z,1516715320.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:41.384Z,1516715321.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:41.413Z,1516715321.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:41.789Z,1516715321.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:41.804Z,1516715321.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:42.180Z,1516715322.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:42.207Z,1516715322.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:42.565Z,1516715322.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:42.592Z,1516715322.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:42.965Z,1516715322.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:42.997Z,1516715322.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:43.366Z,1516715323.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:43.405Z,1516715323.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:43.765Z,1516715323.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:43.785Z,1516715323.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:44.183Z,1516715324.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:44.212Z,1516715324.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:44.579Z,1516715324.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:44.610Z,1516715324.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:44.991Z,1516715324.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:45.021Z,1516715325.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:45.371Z,1516715325.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:45.386Z,1516715325.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:45.770Z,1516715325.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:45.785Z,1516715325.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:46.170Z,1516715326.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:46.185Z,1516715326.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:46.572Z,1516715326.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:46.587Z,1516715326.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:46.970Z,1516715326.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:46.985Z,1516715326.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:47.387Z,1516715327.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:47.412Z,1516715327.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:47.783Z,1516715327.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:47.814Z,1516715327.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:48.175Z,1516715328.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:48.190Z,1516715328.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:48.570Z,1516715328.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:48.585Z,1516715328.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:48.971Z,1516715328.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:48.986Z,1516715328.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:49.371Z,1516715329.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:49.386Z,1516715329.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:49.770Z,1516715329.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:49.785Z,1516715329.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:50.187Z,1516715330.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:50.222Z,1516715330.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:50.583Z,1516715330.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:50.598Z,1516715330.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:50.979Z,1516715330.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:50.994Z,1516715330.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:51.372Z,1516715331.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:51.399Z,1516715331.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:51.773Z,1516715331.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:51.788Z,1516715331.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:52.179Z,1516715332.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:52.194Z,1516715332.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:52.595Z,1516715332.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:52.610Z,1516715332.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:52.987Z,1516715332.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:53.001Z,1516715333.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:53.374Z,1516715333.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:53.389Z,1516715333.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:53.778Z,1516715333.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:53.793Z,1516715333.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:54.184Z,1516715334.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:54.211Z,1516715334.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:54.588Z,1516715334.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:54.607Z,1516715334.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:54.986Z,1516715334.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:55.009Z,1516715335.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:55.366Z,1516715335.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:55.398Z,1516715335.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:55.765Z,1516715335.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:55.796Z,1516715335.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:56.179Z,1516715336.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:56.217Z,1516715336.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:56.583Z,1516715336.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:56.610Z,1516715336.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:56.995Z,1516715336.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:57.010Z,1516715337.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:57.379Z,1516715337.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:57.406Z,1516715337.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:57.775Z,1516715337.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:57.807Z,1516715337.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:58.185Z,1516715338.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:58.213Z,1516715338.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:58.602Z,1516715338.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:58.618Z,1516715338.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:58.989Z,1516715338.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:59.021Z,1516715339.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:59.378Z,1516715339.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:59.414Z,1516715339.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:48:59.773Z,1516715339.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:48:59.816Z,1516715339.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:02.873Z,1516715342.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:02.890Z,1516715342.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:03.018Z,1516715343.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:03.053Z,1516715343.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:03.373Z,1516715343.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:03.388Z,1516715343.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:03.757Z,1516715343.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:03.787Z,1516715343.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:04.149Z,1516715344.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:04.184Z,1516715344.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:04.549Z,1516715344.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:04.588Z,1516715344.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:04.949Z,1516715344.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:04.964Z,1516715344.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:05.360Z,1516715345.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:05.395Z,1516715345.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:05.763Z,1516715345.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:05.790Z,1516715345.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:06.160Z,1516715346.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:06.195Z,1516715346.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:06.553Z,1516715346.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:06.568Z,1516715346.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:06.953Z,1516715346.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:06.968Z,1516715346.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:07.354Z,1516715347.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:07.369Z,1516715347.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:07.754Z,1516715347.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:07.777Z,1516715347.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:08.171Z,1516715348.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:08.203Z,1516715348.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:08.571Z,1516715348.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:08.602Z,1516715348.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:08.971Z,1516715348.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:08.986Z,1516715348.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:09.360Z,1516715349.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:09.374Z,1516715349.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:09.761Z,1516715349.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:09.777Z,1516715349.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:10.162Z,1516715350.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:10.177Z,1516715350.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:10.564Z,1516715350.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:10.584Z,1516715350.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:10.963Z,1516715350.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:10.978Z,1516715350.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:11.356Z,1516715351.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:11.375Z,1516715351.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:11.757Z,1516715351.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:11.772Z,1516715351.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:12.158Z,1516715352.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:12.173Z,1516715352.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:12.562Z,1516715352.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:12.585Z,1516715352.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:12.966Z,1516715352.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:12.981Z,1516715352.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:13.368Z,1516715353.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:13.383Z,1516715353.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:13.757Z,1516715353.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:13.772Z,1516715353.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:14.157Z,1516715354.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:14.172Z,1516715354.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:14.559Z,1516715354.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:14.574Z,1516715354.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:14.957Z,1516715354.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:14.972Z,1516715354.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:15.366Z,1516715355.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:15.381Z,1516715355.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:15.768Z,1516715355.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:15.789Z,1516715355.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:16.167Z,1516715356.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:16.189Z,1516715356.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:16.557Z,1516715356.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:16.571Z,1516715356.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:16.958Z,1516715356.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:16.974Z,1516715356.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:17.365Z,1516715357.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:17.381Z,1516715357.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:17.758Z,1516715357.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:17.772Z,1516715357.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:18.153Z,1516715358.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:18.185Z,1516715358.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:18.570Z,1516715358.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:18.585Z,1516715358.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:18.971Z,1516715358.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:18.985Z,1516715358.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:19.371Z,1516715359.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:19.393Z,1516715359.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:19.749Z,1516715359.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:19.781Z,1516715359.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:20.149Z,1516715360.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:20.174Z,1516715360.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:20.564Z,1516715360.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:20.579Z,1516715360.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:20.949Z,1516715360.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:20.981Z,1516715360.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:21.368Z,1516715361.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:21.383Z,1516715361.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:21.773Z,1516715361.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:21.788Z,1516715361.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:22.168Z,1516715362.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:22.183Z,1516715362.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:22.549Z,1516715362.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:22.575Z,1516715362.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:22.949Z,1516715362.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:22.985Z,1516715362.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:23.349Z,1516715363.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:23.375Z,1516715363.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:23.749Z,1516715363.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:23.782Z,1516715363.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:24.153Z,1516715364.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:24.182Z,1516715364.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:24.569Z,1516715364.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:24.584Z,1516715364.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:24.971Z,1516715364.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:24.986Z,1516715364.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:25.369Z,1516715365.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:25.384Z,1516715365.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:25.749Z,1516715365.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:25.781Z,1516715365.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:26.149Z,1516715366.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:26.183Z,1516715366.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:26.568Z,1516715366.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:26.583Z,1516715366.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:26.949Z,1516715366.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:26.975Z,1516715366.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:27.378Z,1516715367.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:27.393Z,1516715367.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:27.775Z,1516715367.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:27.790Z,1516715367.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:28.175Z,1516715368.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:28.190Z,1516715368.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:28.549Z,1516715368.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:28.574Z,1516715368.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:28.953Z,1516715368.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:28.982Z,1516715368.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:29.349Z,1516715369.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:29.380Z,1516715369.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:29.757Z,1516715369.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:29.788Z,1516715369.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:30.153Z,1516715370.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:30.185Z,1516715370.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:30.560Z,1516715370.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:30.591Z,1516715370.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:30.971Z,1516715370.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:30.997Z,1516715370.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:31.371Z,1516715371.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:31.409Z,1516715371.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:31.753Z,1516715371.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:31.768Z,1516715371.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:32.157Z,1516715372.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:32.172Z,1516715372.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:32.559Z,1516715372.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:32.574Z,1516715372.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:32.960Z,1516715372.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:32.981Z,1516715372.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:33.375Z,1516715373.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:33.408Z,1516715373.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:33.772Z,1516715373.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:33.803Z,1516715373.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:34.165Z,1516715374.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:34.180Z,1516715374.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:34.562Z,1516715374.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:34.577Z,1516715374.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:34.962Z,1516715374.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:34.978Z,1516715374.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:35.353Z,1516715375.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:35.385Z,1516715375.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:35.760Z,1516715375.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:35.776Z,1516715375.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:36.157Z,1516715376.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:36.178Z,1516715376.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:36.564Z,1516715376.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:36.580Z,1516715376.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:36.963Z,1516715376.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:36.984Z,1516715376.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:37.364Z,1516715377.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:37.379Z,1516715377.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:37.755Z,1516715377.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:37.778Z,1516715377.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:38.165Z,1516715378.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:38.179Z,1516715378.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:38.564Z,1516715378.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:38.579Z,1516715378.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:38.956Z,1516715378.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:38.977Z,1516715378.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:39.367Z,1516715379.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:39.382Z,1516715379.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:39.768Z,1516715379.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:39.783Z,1516715379.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:40.180Z,1516715380.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:40.194Z,1516715380.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:40.567Z,1516715380.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:40.588Z,1516715380.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:40.963Z,1516715380.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:40.978Z,1516715380.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:41.358Z,1516715381.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:41.385Z,1516715381.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:41.766Z,1516715381.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:41.781Z,1516715381.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:42.146Z,1516715382.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:42.183Z,1516715382.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:42.569Z,1516715382.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:42.585Z,1516715382.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:42.972Z,1516715382.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:42.987Z,1516715382.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:43.376Z,1516715383.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:43.392Z,1516715383.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:43.765Z,1516715383.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:43.780Z,1516715383.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:44.151Z,1516715384.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:44.177Z,1516715384.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:44.553Z,1516715384.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:44.581Z,1516715384.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:44.969Z,1516715384.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:44.984Z,1516715384.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:45.368Z,1516715385.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:45.382Z,1516715385.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:45.776Z,1516715385.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:45.791Z,1516715385.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:46.167Z,1516715386.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:46.182Z,1516715386.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:46.553Z,1516715386.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:46.587Z,1516715386.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:46.953Z,1516715386.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:46.984Z,1516715386.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:47.368Z,1516715387.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:47.383Z,1516715387.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:47.752Z,1516715387.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:47.777Z,1516715387.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:48.150Z,1516715388.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:48.189Z,1516715388.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:48.576Z,1516715388.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:48.591Z,1516715388.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:48.974Z,1516715388.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:48.992Z,1516715388.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:49.374Z,1516715389.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:49.389Z,1516715389.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:49.752Z,1516715389.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:49.789Z,1516715389.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:50.157Z,1516715390.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:50.183Z,1516715390.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:50.555Z,1516715390.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:50.586Z,1516715390.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:50.952Z,1516715390.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:50.979Z,1516715390.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:51.360Z,1516715391.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:51.393Z,1516715391.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:51.764Z,1516715391.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:51.799Z,1516715391.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:52.169Z,1516715392.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:52.194Z,1516715392.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:52.563Z,1516715392.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:52.588Z,1516715392.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:52.952Z,1516715392.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:52.967Z,1516715392.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:53.357Z,1516715393.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:53.393Z,1516715393.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:53.754Z,1516715393.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:53.797Z,1516715393.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:54.151Z,1516715394.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:54.161Z,1516715394.161 [PNI_TCM](ERROR): CRC does not match. Expected:0x16742 got:0x7618 2018-01-23T13:49:54.203Z,1516715394.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:54.575Z,1516715394.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:54.605Z,1516715394.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:54.971Z,1516715394.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:55.004Z,1516715395.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:55.369Z,1516715395.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:55.401Z,1516715395.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:55.763Z,1516715395.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:55.778Z,1516715395.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:56.155Z,1516715396.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:56.194Z,1516715396.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:56.560Z,1516715396.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:56.576Z,1516715396.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:56.956Z,1516715396.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:56.999Z,1516715396.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:57.372Z,1516715397.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:57.380Z,1516715397.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x8516 got:0x3131 2018-01-23T13:49:57.409Z,1516715397.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:57.762Z,1516715397.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:57.777Z,1516715397.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:58.171Z,1516715398.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:58.186Z,1516715398.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:58.557Z,1516715398.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:58.585Z,1516715398.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:58.956Z,1516715398.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:58.966Z,1516715398.966 [PNI_TCM](ERROR): CRC does not match. Expected:0x50727 got:0x6210 2018-01-23T13:49:59.009Z,1516715399.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:59.364Z,1516715399.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:59.379Z,1516715399.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:49:59.757Z,1516715399.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:49:59.777Z,1516715399.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:00.158Z,1516715400.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:00.193Z,1516715400.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:03.263Z,1516715403.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:03.271Z,1516715403.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.271Z,1516715403.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.272Z,1516715403.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.272Z,1516715403.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.272Z,1516715403.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.273Z,1516715403.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.273Z,1516715403.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T13:50:03.335Z,1516715403.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:03.458Z,1516715403.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:03.473Z,1516715403.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:03.823Z,1516715403.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:03.838Z,1516715403.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:04.217Z,1516715404.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:04.232Z,1516715404.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:04.612Z,1516715404.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:04.635Z,1516715404.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:05.021Z,1516715405.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:05.036Z,1516715405.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:05.423Z,1516715405.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:05.438Z,1516715405.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:05.826Z,1516715405.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:05.841Z,1516715405.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:06.227Z,1516715406.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:06.242Z,1516715406.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:06.621Z,1516715406.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:06.641Z,1516715406.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:07.020Z,1516715407.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:07.041Z,1516715407.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:07.417Z,1516715407.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:07.432Z,1516715407.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:07.818Z,1516715407.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:07.833Z,1516715407.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:08.224Z,1516715408.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:08.239Z,1516715408.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:08.624Z,1516715408.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:08.639Z,1516715408.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:09.026Z,1516715409.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:09.045Z,1516715409.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:09.423Z,1516715409.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:09.438Z,1516715409.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:09.821Z,1516715409.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:09.836Z,1516715409.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:10.220Z,1516715410.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:10.241Z,1516715410.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:10.612Z,1516715410.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:10.639Z,1516715410.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:11.008Z,1516715411.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:11.036Z,1516715411.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:11.428Z,1516715411.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:11.442Z,1516715411.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:11.838Z,1516715411.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:11.857Z,1516715411.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:12.225Z,1516715412.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:12.239Z,1516715412.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:12.604Z,1516715412.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:12.637Z,1516715412.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:13.007Z,1516715413.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:13.038Z,1516715413.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:13.412Z,1516715413.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:13.440Z,1516715413.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:13.805Z,1516715413.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:13.833Z,1516715413.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:14.203Z,1516715414.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:14.221Z,1516715414.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:14.623Z,1516715414.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:14.651Z,1516715414.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:15.035Z,1516715415.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:15.050Z,1516715415.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:15.420Z,1516715415.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:15.445Z,1516715415.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:15.804Z,1516715415.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:15.821Z,1516715415.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:16.208Z,1516715416.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:16.229Z,1516715416.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:16.617Z,1516715416.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:16.632Z,1516715416.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:17.013Z,1516715417.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:17.028Z,1516715417.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:17.420Z,1516715417.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:17.435Z,1516715417.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:17.820Z,1516715417.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:17.836Z,1516715417.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:18.220Z,1516715418.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:18.240Z,1516715418.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:18.614Z,1516715418.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:18.629Z,1516715418.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:19.014Z,1516715419.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:19.029Z,1516715419.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:19.412Z,1516715419.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:19.436Z,1516715419.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:19.813Z,1516715419.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:19.832Z,1516715419.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:20.222Z,1516715420.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:20.237Z,1516715420.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:20.626Z,1516715420.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:20.641Z,1516715420.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:21.019Z,1516715421.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:21.057Z,1516715421.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:21.424Z,1516715421.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:21.440Z,1516715421.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:21.809Z,1516715421.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:21.838Z,1516715421.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:22.206Z,1516715422.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:22.243Z,1516715422.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:22.607Z,1516715422.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:22.640Z,1516715422.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:23.011Z,1516715423.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:23.040Z,1516715423.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:23.432Z,1516715423.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:23.453Z,1516715423.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:23.840Z,1516715423.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:23.861Z,1516715423.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:24.217Z,1516715424.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:24.245Z,1516715424.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:24.605Z,1516715424.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:24.628Z,1516715424.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:25.008Z,1516715425.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:25.039Z,1516715425.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:25.409Z,1516715425.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:25.424Z,1516715425.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:25.812Z,1516715425.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:25.829Z,1516715425.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:26.220Z,1516715426.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:26.234Z,1516715426.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:26.624Z,1516715426.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:26.651Z,1516715426.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:27.020Z,1516715427.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:27.035Z,1516715427.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:27.418Z,1516715427.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:27.434Z,1516715427.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:27.817Z,1516715427.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:27.832Z,1516715427.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:28.210Z,1516715428.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:28.239Z,1516715428.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:28.624Z,1516715428.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:28.640Z,1516715428.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:29.015Z,1516715429.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:29.032Z,1516715429.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:29.420Z,1516715429.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:29.447Z,1516715429.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:29.827Z,1516715429.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:29.842Z,1516715429.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:30.230Z,1516715430.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:30.245Z,1516715430.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:30.602Z,1516715430.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:30.633Z,1516715430.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:31.023Z,1516715431.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:31.031Z,1516715431.031 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T13:50:31.073Z,1516715431.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:31.406Z,1516715431.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:31.431Z,1516715431.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:31.818Z,1516715431.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:31.833Z,1516715431.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:32.204Z,1516715432.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:32.237Z,1516715432.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:32.626Z,1516715432.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:32.634Z,1516715432.634 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T13:50:32.653Z,1516715432.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:33.024Z,1516715433.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:33.051Z,1516715433.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:33.428Z,1516715433.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:33.443Z,1516715433.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:33.804Z,1516715433.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:33.837Z,1516715433.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:34.202Z,1516715434.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:34.230Z,1516715434.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:34.608Z,1516715434.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:34.641Z,1516715434.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:35.007Z,1516715435.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:35.041Z,1516715435.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:35.424Z,1516715435.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:35.446Z,1516715435.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:35.826Z,1516715435.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:35.857Z,1516715435.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:36.226Z,1516715436.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:36.241Z,1516715436.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:36.604Z,1516715436.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:36.627Z,1516715436.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:37.004Z,1516715437.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:37.048Z,1516715437.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:37.404Z,1516715437.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:37.442Z,1516715437.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:37.806Z,1516715437.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:37.836Z,1516715437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:38.207Z,1516715438.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:38.221Z,1516715438.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:38.619Z,1516715438.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:38.662Z,1516715438.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:39.015Z,1516715439.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:39.026Z,1516715439.026 [PNI_TCM](ERROR): CRC does not match. Expected:0x34020 got:0x50642 2018-01-23T13:50:39.060Z,1516715439.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:39.428Z,1516715439.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:39.454Z,1516715439.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:39.811Z,1516715439.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:39.825Z,1516715439.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:40.206Z,1516715440.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:40.252Z,1516715440.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:40.617Z,1516715440.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:40.652Z,1516715440.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:41.015Z,1516715441.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:41.031Z,1516715441.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:41.424Z,1516715441.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:41.457Z,1516715441.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:41.823Z,1516715441.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:41.860Z,1516715441.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:42.219Z,1516715442.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:42.230Z,1516715442.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T13:50:42.260Z,1516715442.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:42.609Z,1516715442.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:42.651Z,1516715442.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:43.012Z,1516715443.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:43.020Z,1516715443.020 [PNI_TCM](ERROR): CRC does not match. Expected:0x61391 got:0x49716 2018-01-23T13:50:43.037Z,1516715443.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:43.414Z,1516715443.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:43.457Z,1516715443.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:43.810Z,1516715443.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:43.827Z,1516715443.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:44.215Z,1516715444.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:44.233Z,1516715444.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:44.628Z,1516715444.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:44.676Z,1516715444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:45.018Z,1516715445.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:45.055Z,1516715445.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:45.422Z,1516715445.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:45.441Z,1516715445.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:45.814Z,1516715445.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:45.832Z,1516715445.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:46.208Z,1516715446.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:46.234Z,1516715446.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:46.605Z,1516715446.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:46.649Z,1516715446.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:47.017Z,1516715447.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:47.035Z,1516715447.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:47.429Z,1516715447.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:47.444Z,1516715447.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:47.831Z,1516715447.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:47.846Z,1516715447.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:48.221Z,1516715448.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:48.249Z,1516715448.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:48.602Z,1516715448.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:48.640Z,1516715448.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:49.008Z,1516715449.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:49.038Z,1516715449.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:49.404Z,1516715449.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:49.442Z,1516715449.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:49.805Z,1516715449.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:49.853Z,1516715449.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:50.208Z,1516715450.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:50.236Z,1516715450.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:50.622Z,1516715450.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:50.654Z,1516715450.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:51.021Z,1516715451.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:51.061Z,1516715451.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:51.420Z,1516715451.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:51.449Z,1516715451.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:51.816Z,1516715451.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:51.859Z,1516715451.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:52.208Z,1516715452.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:52.223Z,1516715452.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:52.618Z,1516715452.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:52.656Z,1516715452.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:53.014Z,1516715453.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:53.061Z,1516715453.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:53.427Z,1516715453.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:53.463Z,1516715453.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:53.819Z,1516715453.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:53.838Z,1516715453.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:54.219Z,1516715454.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:54.244Z,1516715454.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:54.610Z,1516715454.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:54.645Z,1516715454.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:55.018Z,1516715455.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:55.037Z,1516715455.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:55.414Z,1516715455.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:55.429Z,1516715455.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:55.813Z,1516715455.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:55.838Z,1516715455.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:56.205Z,1516715456.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:56.241Z,1516715456.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:56.614Z,1516715456.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:56.643Z,1516715456.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:57.027Z,1516715457.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:57.051Z,1516715457.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:57.416Z,1516715457.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:57.453Z,1516715457.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:57.809Z,1516715457.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:57.842Z,1516715457.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:58.203Z,1516715458.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:58.219Z,1516715458.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:58.605Z,1516715458.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:58.621Z,1516715458.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:58.624Z,1516715458.624 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:45:58.5Z 2018-01-23T13:50:58.625Z,1516715458.625 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T13:50:58.625Z,1516715458.625 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T13:50:59.013Z,1516715459.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:59.029Z,1516715459.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:59.551Z,1516715459.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:59.566Z,1516715459.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:50:59.832Z,1516715459.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:50:59.877Z,1516715459.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:02.915Z,1516715462.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:02.922Z,1516715462.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x19387 got:0x6210 2018-01-23T13:51:02.923Z,1516715462.923 [PNI_TCM](ERROR): CRC does not match. Expected:0x55960 got:0x6210 2018-01-23T13:51:02.923Z,1516715462.923 [PNI_TCM](ERROR): CRC does not match. Expected:0x62167 got:0x6210 2018-01-23T13:51:02.924Z,1516715462.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x17230 got:0x6210 2018-01-23T13:51:02.924Z,1516715462.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x40986 got:0x6210 2018-01-23T13:51:02.924Z,1516715462.924 [PNI_TCM](ERROR): CRC does not match. Expected:0x19024 got:0x6210 2018-01-23T13:51:02.925Z,1516715462.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x20863 got:0x6210 2018-01-23T13:51:02.993Z,1516715462.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:03.075Z,1516715463.075 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0248.lzma 2018-01-23T13:51:03.114Z,1516715463.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:03.138Z,1516715463.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:03.458Z,1516715463.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:03.481Z,1516715463.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:03.995Z,1516715463.995 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0248.lzma.bak 2018-01-23T13:51:03.995Z,1516715463.995 [DataOverHttps](INFO): SBD MOMSN=7755665 2018-01-23T13:51:04.025Z,1516715464.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:04.068Z,1516715464.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:04.505Z,1516715464.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:04.525Z,1516715464.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:04.677Z,1516715464.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:04.709Z,1516715464.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:07.775Z,1516715467.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:07.790Z,1516715467.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:07.904Z,1516715467.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:07.927Z,1516715467.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:08.268Z,1516715468.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:08.291Z,1516715468.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:08.293Z,1516715468.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:08.293Z,1516715468.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211 2018-01-23T13:51:08.293Z,1516715468.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:51:08.314Z,1516715468.314 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:51:08.682Z,1516715468.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:08.777Z,1516715468.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:08.827Z,1516715468.827 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:51:08.827Z,1516715468.827 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211 2018-01-23T13:51:09.062Z,1516715469.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:09.107Z,1516715469.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:09.108Z,1516715469.108 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:51:09.109Z,1516715469.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:51:09.109Z,1516715469.109 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:51:09.473Z,1516715469.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:09.501Z,1516715469.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:09.501Z,1516715469.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211 2018-01-23T13:51:09.501Z,1516715469.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:51:09.503Z,1516715469.503 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:09.503Z,1516715469.503 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 211 2018-01-23T13:51:09.503Z,1516715469.503 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:51:09.516Z,1516715469.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:51:09.516Z,1516715469.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:51:14.909Z,1516715474.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:14.975Z,1516715474.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:51:14.975Z,1516715474.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211 2018-01-23T13:51:14.976Z,1516715474.976 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:51:14.976Z,1516715474.976 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 211 2018-01-23T13:51:15.044Z,1516715475.044 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0249.lzma 2018-01-23T13:51:15.076Z,1516715475.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:15.115Z,1516715475.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:51:15.116Z,1516715475.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:51:15.116Z,1516715475.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:51:15.117Z,1516715475.117 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:51:15.117Z,1516715475.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:51:15.117Z,1516715475.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:51:15.411Z,1516715475.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:15.444Z,1516715475.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s. 2018-01-23T13:51:15.445Z,1516715475.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:15.786Z,1516715475.786 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0249.lzma.bak 2018-01-23T13:51:15.786Z,1516715475.786 [DataOverHttps](INFO): SBD MOMSN=7755667 2018-01-23T13:51:15.844Z,1516715475.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:15.871Z,1516715475.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:51:15.872Z,1516715475.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:16.554Z,1516715476.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:16.652Z,1516715476.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:51:16.653Z,1516715476.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:16.666Z,1516715476.666 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T13:51:16.666Z,1516715476.666 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T13:51:16.666Z,1516715476.666 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T13:51:16.787Z,1516715476.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:16.810Z,1516715476.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T13:51:16.827Z,1516715476.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:23.287Z,1516715483.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:23.308Z,1516715483.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s. 2018-01-23T13:51:23.309Z,1516715483.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:23.412Z,1516715483.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:23.444Z,1516715483.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T13:51:23.445Z,1516715483.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:23.793Z,1516715483.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:23.816Z,1516715483.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T13:51:23.817Z,1516715483.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:24.202Z,1516715484.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:24.217Z,1516715484.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T13:51:24.218Z,1516715484.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:24.590Z,1516715484.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:24.612Z,1516715484.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T13:51:24.613Z,1516715484.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:24.999Z,1516715484.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:25.039Z,1516715485.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T13:51:25.040Z,1516715485.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:25.404Z,1516715485.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:25.418Z,1516715485.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T13:51:25.419Z,1516715485.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:25.804Z,1516715485.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:25.818Z,1516715485.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T13:51:25.819Z,1516715485.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:26.200Z,1516715486.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:26.214Z,1516715486.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T13:51:26.215Z,1516715486.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:26.591Z,1516715486.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:26.612Z,1516715486.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T13:51:26.613Z,1516715486.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:26.989Z,1516715486.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:27.004Z,1516715487.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T13:51:27.005Z,1516715487.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:27.408Z,1516715487.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:27.422Z,1516715487.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T13:51:27.423Z,1516715487.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:27.865Z,1516715487.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:27.913Z,1516715487.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:51:27.914Z,1516715487.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:28.205Z,1516715488.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:28.260Z,1516715488.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:51:28.261Z,1516715488.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:28.596Z,1516715488.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:28.625Z,1516715488.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T13:51:28.626Z,1516715488.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:28.994Z,1516715488.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:29.032Z,1516715489.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T13:51:29.033Z,1516715489.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:29.409Z,1516715489.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:29.450Z,1516715489.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T13:51:29.455Z,1516715489.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:29.829Z,1516715489.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:29.866Z,1516715489.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:30.209Z,1516715490.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:30.245Z,1516715490.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:30.601Z,1516715490.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:30.629Z,1516715490.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:30.994Z,1516715490.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:31.025Z,1516715491.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:31.431Z,1516715491.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:31.470Z,1516715491.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:31.814Z,1516715491.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:31.841Z,1516715491.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:32.228Z,1516715492.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:32.253Z,1516715492.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:32.595Z,1516715492.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:32.649Z,1516715492.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:32.993Z,1516715492.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:33.013Z,1516715493.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:33.414Z,1516715493.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:33.433Z,1516715493.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:33.815Z,1516715493.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:33.859Z,1516715493.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:34.202Z,1516715494.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:34.233Z,1516715494.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:34.623Z,1516715494.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:34.651Z,1516715494.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:34.994Z,1516715494.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:35.044Z,1516715495.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:35.402Z,1516715495.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:35.432Z,1516715495.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:35.810Z,1516715495.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:35.841Z,1516715495.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:36.207Z,1516715496.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:36.242Z,1516715496.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:36.596Z,1516715496.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:36.611Z,1516715496.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:36.995Z,1516715496.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:37.010Z,1516715497.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:37.404Z,1516715497.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:37.424Z,1516715497.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:37.809Z,1516715497.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:37.824Z,1516715497.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:38.208Z,1516715498.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:38.223Z,1516715498.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:38.598Z,1516715498.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:38.615Z,1516715498.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:38.992Z,1516715498.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:39.016Z,1516715499.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:39.412Z,1516715499.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:39.427Z,1516715499.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:39.812Z,1516715499.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:39.828Z,1516715499.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:40.204Z,1516715500.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:40.227Z,1516715500.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:40.589Z,1516715500.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:40.616Z,1516715500.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:40.988Z,1516715500.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:41.023Z,1516715501.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:41.412Z,1516715501.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:41.428Z,1516715501.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:41.809Z,1516715501.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:41.837Z,1516715501.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:42.202Z,1516715502.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:42.229Z,1516715502.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:42.589Z,1516715502.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:42.620Z,1516715502.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:42.988Z,1516715502.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:43.029Z,1516715503.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:43.403Z,1516715503.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:43.431Z,1516715503.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:43.807Z,1516715503.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:43.833Z,1516715503.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:44.199Z,1516715504.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:44.230Z,1516715504.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:44.597Z,1516715504.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:44.612Z,1516715504.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:44.996Z,1516715504.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:45.038Z,1516715505.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:45.411Z,1516715505.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:45.441Z,1516715505.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:45.811Z,1516715505.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:45.837Z,1516715505.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:46.207Z,1516715506.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:46.237Z,1516715506.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:46.601Z,1516715506.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:46.632Z,1516715506.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:46.996Z,1516715506.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:47.011Z,1516715507.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:47.412Z,1516715507.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:47.434Z,1516715507.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:47.808Z,1516715507.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:47.836Z,1516715507.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:48.203Z,1516715508.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:48.235Z,1516715508.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:48.598Z,1516715508.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:48.614Z,1516715508.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:48.995Z,1516715508.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:49.010Z,1516715509.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:49.402Z,1516715509.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:49.417Z,1516715509.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:49.807Z,1516715509.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:49.839Z,1516715509.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:50.203Z,1516715510.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:50.218Z,1516715510.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:50.596Z,1516715510.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:50.617Z,1516715510.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:50.998Z,1516715510.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:51.024Z,1516715511.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:51.397Z,1516715511.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:51.412Z,1516715511.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:51.807Z,1516715511.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:51.828Z,1516715511.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:52.206Z,1516715512.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:52.229Z,1516715512.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:52.606Z,1516715512.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:52.621Z,1516715512.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:52.998Z,1516715512.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:53.012Z,1516715513.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:53.397Z,1516715513.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:53.412Z,1516715513.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:53.792Z,1516715513.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:53.810Z,1516715513.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:54.198Z,1516715514.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:54.213Z,1516715514.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:54.607Z,1516715514.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:54.622Z,1516715514.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:55.011Z,1516715515.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:55.026Z,1516715515.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:55.408Z,1516715515.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:55.428Z,1516715515.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:55.799Z,1516715515.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:55.814Z,1516715515.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:56.192Z,1516715516.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:56.214Z,1516715516.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:56.606Z,1516715516.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:56.628Z,1516715516.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:57.002Z,1516715517.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:57.021Z,1516715517.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:57.392Z,1516715517.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:57.417Z,1516715517.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:57.806Z,1516715517.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:57.829Z,1516715517.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:58.211Z,1516715518.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:58.233Z,1516715518.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:58.606Z,1516715518.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:58.633Z,1516715518.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:59.001Z,1516715519.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:59.016Z,1516715519.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:59.401Z,1516715519.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:59.416Z,1516715519.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:51:59.789Z,1516715519.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:51:59.817Z,1516715519.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:00.192Z,1516715520.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:00.220Z,1516715520.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:00.608Z,1516715520.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:00.624Z,1516715520.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:01.010Z,1516715521.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:01.033Z,1516715521.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:01.415Z,1516715521.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:01.430Z,1516715521.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:01.792Z,1516715521.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:01.819Z,1516715521.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:02.188Z,1516715522.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:02.225Z,1516715522.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:02.588Z,1516715522.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:02.622Z,1516715522.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:02.993Z,1516715522.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:03.020Z,1516715523.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:03.387Z,1516715523.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:03.424Z,1516715523.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:03.809Z,1516715523.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:03.824Z,1516715523.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:04.209Z,1516715524.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:04.229Z,1516715524.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:04.608Z,1516715524.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:04.623Z,1516715524.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:04.988Z,1516715524.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:05.026Z,1516715525.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:05.392Z,1516715525.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:05.419Z,1516715525.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:05.789Z,1516715525.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:05.816Z,1516715525.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:06.188Z,1516715526.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:06.227Z,1516715526.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:06.616Z,1516715526.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:06.631Z,1516715526.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:07.003Z,1516715527.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:07.040Z,1516715527.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:07.399Z,1516715527.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:07.432Z,1516715527.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:07.793Z,1516715527.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:07.829Z,1516715527.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:08.188Z,1516715528.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:08.225Z,1516715528.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:08.592Z,1516715528.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:08.607Z,1516715528.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:08.987Z,1516715528.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:09.002Z,1516715529.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:09.396Z,1516715529.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:09.433Z,1516715529.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:09.807Z,1516715529.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:09.842Z,1516715529.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:10.203Z,1516715530.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:10.218Z,1516715530.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:10.607Z,1516715530.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:10.622Z,1516715530.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:10.999Z,1516715530.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:11.014Z,1516715531.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:11.396Z,1516715531.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:11.423Z,1516715531.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:11.802Z,1516715531.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:11.817Z,1516715531.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:12.199Z,1516715532.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:12.214Z,1516715532.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:12.603Z,1516715532.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:12.618Z,1516715532.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:13.004Z,1516715533.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:13.019Z,1516715533.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:13.404Z,1516715533.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:13.425Z,1516715533.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:13.802Z,1516715533.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:13.818Z,1516715533.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:14.203Z,1516715534.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:14.218Z,1516715534.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:14.600Z,1516715534.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:14.614Z,1516715534.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:14.994Z,1516715534.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:15.018Z,1516715535.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:15.393Z,1516715535.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:15.416Z,1516715535.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:15.805Z,1516715535.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:15.820Z,1516715535.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:16.203Z,1516715536.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:16.218Z,1516715536.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:16.603Z,1516715536.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:16.625Z,1516715536.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:17.004Z,1516715537.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:17.019Z,1516715537.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:20.096Z,1516715540.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:20.111Z,1516715540.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:20.209Z,1516715540.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:20.252Z,1516715540.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:20.579Z,1516715540.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:20.608Z,1516715540.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:20.979Z,1516715540.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:21.005Z,1516715541.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:21.371Z,1516715541.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:21.405Z,1516715541.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:21.765Z,1516715541.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:21.780Z,1516715541.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:22.158Z,1516715542.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:22.172Z,1516715542.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:22.558Z,1516715542.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:22.581Z,1516715542.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:22.960Z,1516715542.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:22.975Z,1516715542.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:23.362Z,1516715543.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:23.376Z,1516715543.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:23.764Z,1516715543.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:23.779Z,1516715543.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:24.167Z,1516715544.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:24.182Z,1516715544.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:24.574Z,1516715544.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:24.609Z,1516715544.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:24.965Z,1516715544.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:24.980Z,1516715544.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:25.362Z,1516715545.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:25.376Z,1516715545.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:25.763Z,1516715545.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:25.778Z,1516715545.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:26.161Z,1516715546.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:26.177Z,1516715546.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:26.567Z,1516715546.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:26.582Z,1516715546.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:26.967Z,1516715546.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:26.982Z,1516715546.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:27.379Z,1516715547.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:27.410Z,1516715547.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:27.761Z,1516715547.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:27.776Z,1516715547.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:28.162Z,1516715548.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:28.177Z,1516715548.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:28.557Z,1516715548.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:28.585Z,1516715548.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:28.966Z,1516715548.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:28.981Z,1516715548.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:29.360Z,1516715549.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:29.385Z,1516715549.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:29.768Z,1516715549.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:29.792Z,1516715549.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:30.174Z,1516715550.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:30.197Z,1516715550.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:30.572Z,1516715550.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:30.586Z,1516715550.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:30.962Z,1516715550.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:30.977Z,1516715550.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:31.359Z,1516715551.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:31.379Z,1516715551.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:31.762Z,1516715551.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:31.777Z,1516715551.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:32.161Z,1516715552.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:32.176Z,1516715552.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:32.568Z,1516715552.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:32.591Z,1516715552.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:32.976Z,1516715552.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:32.991Z,1516715552.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:33.368Z,1516715553.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:33.395Z,1516715553.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:33.755Z,1516715553.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:33.782Z,1516715553.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:34.153Z,1516715554.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:34.186Z,1516715554.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:34.557Z,1516715554.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:34.584Z,1516715554.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:34.954Z,1516715554.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:34.985Z,1516715554.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:35.357Z,1516715555.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:35.385Z,1516715555.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:35.776Z,1516715555.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:35.791Z,1516715555.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:36.174Z,1516715556.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:36.202Z,1516715556.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:36.573Z,1516715556.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:36.587Z,1516715556.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:36.953Z,1516715556.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:36.989Z,1516715556.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:37.357Z,1516715557.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:37.383Z,1516715557.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:37.754Z,1516715557.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:37.790Z,1516715557.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:38.157Z,1516715558.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:38.184Z,1516715558.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:38.568Z,1516715558.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:38.590Z,1516715558.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:38.976Z,1516715558.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:38.991Z,1516715558.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:39.368Z,1516715559.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:39.390Z,1516715559.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:39.753Z,1516715559.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:39.784Z,1516715559.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:40.157Z,1516715560.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:40.190Z,1516715560.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:40.557Z,1516715560.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:40.588Z,1516715560.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:40.954Z,1516715560.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:40.989Z,1516715560.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:41.352Z,1516715561.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:41.367Z,1516715561.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:41.786Z,1516715561.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:41.801Z,1516715561.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:42.187Z,1516715562.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:42.201Z,1516715562.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:42.570Z,1516715562.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:42.602Z,1516715562.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:42.961Z,1516715562.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:42.976Z,1516715562.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:43.358Z,1516715563.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:43.377Z,1516715563.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:43.758Z,1516715563.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:43.785Z,1516715563.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:44.161Z,1516715564.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:44.189Z,1516715564.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:44.575Z,1516715564.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:44.590Z,1516715564.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:44.976Z,1516715564.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:44.991Z,1516715564.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:45.375Z,1516715565.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:45.390Z,1516715565.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:45.757Z,1516715565.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:45.787Z,1516715565.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:46.159Z,1516715566.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:46.191Z,1516715566.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:46.566Z,1516715566.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:46.581Z,1516715566.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:46.957Z,1516715566.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:46.987Z,1516715566.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:47.372Z,1516715567.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:47.387Z,1516715567.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:47.773Z,1516715567.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:47.789Z,1516715567.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:48.176Z,1516715568.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:48.191Z,1516715568.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:48.574Z,1516715568.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:48.592Z,1516715568.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:48.956Z,1516715568.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:48.987Z,1516715568.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:49.354Z,1516715569.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:49.385Z,1516715569.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:49.755Z,1516715569.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:49.784Z,1516715569.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:50.151Z,1516715570.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:50.191Z,1516715570.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:50.568Z,1516715570.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:50.595Z,1516715570.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:50.978Z,1516715570.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:50.992Z,1516715570.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:51.368Z,1516715571.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:51.399Z,1516715571.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:51.758Z,1516715571.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:51.789Z,1516715571.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:52.153Z,1516715572.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:52.193Z,1516715572.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:52.557Z,1516715572.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:52.590Z,1516715572.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:52.954Z,1516715572.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:52.969Z,1516715572.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:53.365Z,1516715573.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:53.404Z,1516715573.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:53.764Z,1516715573.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:53.780Z,1516715573.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:54.167Z,1516715574.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:54.184Z,1516715574.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:54.564Z,1516715574.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:54.578Z,1516715574.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:54.959Z,1516715574.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:54.980Z,1516715574.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:55.360Z,1516715575.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:55.375Z,1516715575.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:55.761Z,1516715575.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:55.775Z,1516715575.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:56.161Z,1516715576.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:56.176Z,1516715576.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:56.564Z,1516715576.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:56.579Z,1516715576.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:56.967Z,1516715576.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:56.988Z,1516715576.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:57.371Z,1516715577.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:57.386Z,1516715577.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:57.757Z,1516715577.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:57.784Z,1516715577.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:58.162Z,1516715578.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:58.177Z,1516715578.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:58.561Z,1516715578.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:58.576Z,1516715578.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:58.960Z,1516715578.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:58.983Z,1516715578.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:59.360Z,1516715579.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:59.396Z,1516715579.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:52:59.768Z,1516715579.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:52:59.790Z,1516715579.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:00.174Z,1516715580.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:00.202Z,1516715580.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:00.572Z,1516715580.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:00.587Z,1516715580.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:00.951Z,1516715580.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:00.974Z,1516715580.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:01.353Z,1516715581.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:01.383Z,1516715581.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:01.754Z,1516715581.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:01.769Z,1516715581.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:02.153Z,1516715582.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:02.168Z,1516715582.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:02.548Z,1516715582.548 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T13:53:02.549Z,1516715582.549 [NAL9602] Data Fault, FailCount= 3 2018-01-23T13:53:02.549Z,1516715582.549 [NAL9602](ERROR): Data Fault 2018-01-23T13:53:02.566Z,1516715582.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:02.601Z,1516715582.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:02.614Z,1516715582.614 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T13:53:02.940Z,1516715582.940 [NAL9602](INFO): Powering down 2018-01-23T13:53:02.958Z,1516715582.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:02.972Z,1516715582.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:03.357Z,1516715583.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:03.376Z,1516715583.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:03.757Z,1516715583.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:03.784Z,1516715583.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:03.809Z,1516715583.809 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T13:53:03.809Z,1516715583.809 [NAL9602] No Fault, FailCount= 3 2018-01-23T13:53:04.161Z,1516715584.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:04.176Z,1516715584.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:04.561Z,1516715584.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:04.576Z,1516715584.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:04.961Z,1516715584.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:04.976Z,1516715584.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:05.361Z,1516715585.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:05.375Z,1516715585.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:05.761Z,1516715585.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:05.776Z,1516715585.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:06.161Z,1516715586.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:06.176Z,1516715586.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:06.561Z,1516715586.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:06.576Z,1516715586.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:06.958Z,1516715586.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:06.973Z,1516715586.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:07.370Z,1516715587.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:07.385Z,1516715587.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:07.761Z,1516715587.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:07.775Z,1516715587.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:08.161Z,1516715588.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:08.176Z,1516715588.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:08.561Z,1516715588.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:08.576Z,1516715588.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:08.961Z,1516715588.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:08.976Z,1516715588.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:09.361Z,1516715589.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:09.376Z,1516715589.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:09.761Z,1516715589.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:09.776Z,1516715589.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:10.161Z,1516715590.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:10.175Z,1516715590.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:10.561Z,1516715590.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:10.576Z,1516715590.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:10.961Z,1516715590.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:10.976Z,1516715590.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:11.361Z,1516715591.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:11.376Z,1516715591.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:11.761Z,1516715591.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:11.776Z,1516715591.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:12.161Z,1516715592.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:12.176Z,1516715592.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:12.566Z,1516715592.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:12.580Z,1516715592.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:12.958Z,1516715592.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:12.973Z,1516715592.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:13.356Z,1516715593.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:13.389Z,1516715593.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:13.765Z,1516715593.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:13.780Z,1516715593.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:14.158Z,1516715594.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:14.173Z,1516715594.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:14.554Z,1516715594.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:14.588Z,1516715594.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:14.961Z,1516715594.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:14.975Z,1516715594.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:15.361Z,1516715595.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:15.376Z,1516715595.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:15.760Z,1516715595.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:15.775Z,1516715595.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:16.161Z,1516715596.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:16.175Z,1516715596.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:16.561Z,1516715596.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:16.576Z,1516715596.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:16.954Z,1516715596.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:16.987Z,1516715596.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:17.369Z,1516715597.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:17.384Z,1516715597.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:20.443Z,1516715600.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:20.468Z,1516715600.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:20.577Z,1516715600.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:20.613Z,1516715600.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:20.928Z,1516715600.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:20.943Z,1516715600.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:21.325Z,1516715601.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:21.340Z,1516715601.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:21.725Z,1516715601.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:21.745Z,1516715601.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:22.131Z,1516715602.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:22.146Z,1516715602.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:22.525Z,1516715602.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:22.539Z,1516715602.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:22.922Z,1516715602.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:22.938Z,1516715602.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:23.326Z,1516715603.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:23.342Z,1516715603.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:23.726Z,1516715603.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:23.742Z,1516715603.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:24.124Z,1516715604.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:24.140Z,1516715604.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:24.527Z,1516715604.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:24.542Z,1516715604.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:24.924Z,1516715604.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:24.939Z,1516715604.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:25.331Z,1516715605.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:25.346Z,1516715605.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:25.725Z,1516715605.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:25.740Z,1516715605.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:26.125Z,1516715606.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:26.140Z,1516715606.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:26.525Z,1516715606.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:26.540Z,1516715606.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:26.930Z,1516715606.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:26.946Z,1516715606.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:27.324Z,1516715607.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:27.340Z,1516715607.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:27.724Z,1516715607.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:27.740Z,1516715607.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:28.124Z,1516715608.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:28.139Z,1516715608.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:28.526Z,1516715608.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:28.545Z,1516715608.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:28.921Z,1516715608.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:28.937Z,1516715608.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:29.324Z,1516715609.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:29.339Z,1516715609.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:29.724Z,1516715609.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:29.739Z,1516715609.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:30.127Z,1516715610.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:30.142Z,1516715610.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:30.529Z,1516715610.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:30.544Z,1516715610.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:30.924Z,1516715610.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:30.939Z,1516715610.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:31.324Z,1516715611.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:31.339Z,1516715611.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:31.734Z,1516715611.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:31.749Z,1516715611.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:32.129Z,1516715612.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:32.144Z,1516715612.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:32.524Z,1516715612.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:32.539Z,1516715612.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:32.924Z,1516715612.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:32.939Z,1516715612.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:33.301Z,1516715613.301 [NAL9602](INFO): Powering up NAL9602 2018-01-23T13:53:33.328Z,1516715613.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:33.356Z,1516715613.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:33.729Z,1516715613.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:33.744Z,1516715613.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:34.129Z,1516715614.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:34.144Z,1516715614.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:34.524Z,1516715614.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:34.539Z,1516715614.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:34.925Z,1516715614.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:34.945Z,1516715614.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:35.329Z,1516715615.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:35.344Z,1516715615.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:35.724Z,1516715615.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:35.739Z,1516715615.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:36.121Z,1516715616.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:36.136Z,1516715616.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:36.520Z,1516715616.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:36.553Z,1516715616.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:36.932Z,1516715616.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:36.947Z,1516715616.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:37.333Z,1516715617.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:37.349Z,1516715617.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:37.719Z,1516715617.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:37.749Z,1516715617.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:38.131Z,1516715618.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:38.145Z,1516715618.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:38.532Z,1516715618.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:38.548Z,1516715618.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:38.936Z,1516715618.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:38.952Z,1516715618.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:39.316Z,1516715619.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:39.351Z,1516715619.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:39.718Z,1516715619.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:39.745Z,1516715619.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:40.118Z,1516715620.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:40.153Z,1516715620.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:40.532Z,1516715620.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:40.546Z,1516715620.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:40.914Z,1516715620.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:40.949Z,1516715620.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:41.319Z,1516715621.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:41.354Z,1516715621.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:41.719Z,1516715621.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:41.754Z,1516715621.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:42.117Z,1516715622.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:42.144Z,1516715622.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:42.524Z,1516715622.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:42.551Z,1516715622.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:42.918Z,1516715622.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:42.950Z,1516715622.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:43.322Z,1516715623.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:43.352Z,1516715623.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:43.748Z,1516715623.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:43.763Z,1516715623.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:44.104Z,1516715624.104 [NAL9602](INFO): NAL9602 initialized 2018-01-23T13:53:44.121Z,1516715624.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:44.153Z,1516715624.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:44.517Z,1516715624.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:44.534Z,1516715624.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:44.928Z,1516715624.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:44.965Z,1516715624.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:45.351Z,1516715625.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:45.366Z,1516715625.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:45.739Z,1516715625.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:45.763Z,1516715625.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:46.131Z,1516715626.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:46.168Z,1516715626.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:46.531Z,1516715626.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:46.566Z,1516715626.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:46.924Z,1516715626.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:46.940Z,1516715626.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:47.340Z,1516715627.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:47.373Z,1516715627.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:47.737Z,1516715627.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:47.773Z,1516715627.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:48.135Z,1516715628.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:48.171Z,1516715628.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:48.527Z,1516715628.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:48.542Z,1516715628.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:48.929Z,1516715628.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:48.945Z,1516715628.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:49.328Z,1516715629.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:49.344Z,1516715629.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:49.726Z,1516715629.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:49.753Z,1516715629.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:50.135Z,1516715630.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:50.150Z,1516715630.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:50.534Z,1516715630.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:50.550Z,1516715630.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:50.937Z,1516715630.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:50.953Z,1516715630.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:51.332Z,1516715631.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:51.348Z,1516715631.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:51.727Z,1516715631.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:51.742Z,1516715631.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:52.121Z,1516715632.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:52.149Z,1516715632.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:52.520Z,1516715632.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:52.557Z,1516715632.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:52.928Z,1516715632.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:52.936Z,1516715632.936 [PNI_TCM](ERROR): CRC does not match. Expected:0x46954 got:0x250 2018-01-23T13:53:52.964Z,1516715632.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:53.340Z,1516715633.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:53.361Z,1516715633.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:53.741Z,1516715633.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:53.765Z,1516715633.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:54.142Z,1516715634.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:54.158Z,1516715634.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:54.517Z,1516715634.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:54.561Z,1516715634.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:54.922Z,1516715634.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:54.952Z,1516715634.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:55.320Z,1516715635.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:55.342Z,1516715635.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:55.717Z,1516715635.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:55.761Z,1516715635.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:56.129Z,1516715636.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:56.158Z,1516715636.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:56.533Z,1516715636.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:56.569Z,1516715636.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:56.928Z,1516715636.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:56.955Z,1516715636.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:57.316Z,1516715637.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:57.365Z,1516715637.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:57.716Z,1516715637.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:57.752Z,1516715637.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:58.118Z,1516715638.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:58.135Z,1516715638.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:58.524Z,1516715638.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:58.539Z,1516715638.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:58.927Z,1516715638.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:58.972Z,1516715638.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:59.341Z,1516715639.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:59.368Z,1516715639.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:53:59.740Z,1516715639.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:53:59.767Z,1516715639.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:00.143Z,1516715640.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:00.170Z,1516715640.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:00.529Z,1516715640.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:00.576Z,1516715640.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:00.930Z,1516715640.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:00.964Z,1516715640.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:01.328Z,1516715641.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:01.344Z,1516715641.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:01.729Z,1516715641.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:01.745Z,1516715641.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:02.128Z,1516715642.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:02.168Z,1516715642.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:02.530Z,1516715642.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:02.550Z,1516715642.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:02.933Z,1516715642.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:02.950Z,1516715642.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:03.326Z,1516715643.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:03.350Z,1516715643.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:03.726Z,1516715643.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:03.761Z,1516715643.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:04.131Z,1516715644.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:04.150Z,1516715644.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:04.526Z,1516715644.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:04.551Z,1516715644.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:04.928Z,1516715644.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:04.949Z,1516715644.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:05.337Z,1516715645.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:05.374Z,1516715645.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:05.740Z,1516715645.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:05.759Z,1516715645.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:06.138Z,1516715646.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:06.154Z,1516715646.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:06.529Z,1516715646.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:06.549Z,1516715646.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:06.928Z,1516715646.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:06.962Z,1516715646.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:07.328Z,1516715647.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:07.349Z,1516715647.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:07.726Z,1516715647.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:07.745Z,1516715647.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:08.137Z,1516715648.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:08.154Z,1516715648.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:08.537Z,1516715648.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:08.564Z,1516715648.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:08.933Z,1516715648.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:08.967Z,1516715648.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:09.318Z,1516715649.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:09.350Z,1516715649.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:09.352Z,1516715649.352 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:09.352Z,1516715649.352 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212 2018-01-23T13:54:09.353Z,1516715649.353 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:54:09.365Z,1516715649.365 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:54:09.716Z,1516715649.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:09.753Z,1516715649.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:09.770Z,1516715649.770 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:54:09.770Z,1516715649.770 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212 2018-01-23T13:54:10.115Z,1516715650.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:10.150Z,1516715650.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:10.151Z,1516715650.151 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:54:10.151Z,1516715650.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:54:10.152Z,1516715650.152 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:54:10.517Z,1516715650.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:10.560Z,1516715650.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:10.920Z,1516715650.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:10.952Z,1516715650.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:11.328Z,1516715651.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:11.365Z,1516715651.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:11.744Z,1516715651.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:11.777Z,1516715651.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:12.131Z,1516715652.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:12.162Z,1516715652.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:12.516Z,1516715652.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:12.561Z,1516715652.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:12.916Z,1516715652.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:12.956Z,1516715652.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:13.325Z,1516715653.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:13.340Z,1516715653.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:13.721Z,1516715653.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:13.735Z,1516715653.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:14.131Z,1516715654.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:14.162Z,1516715654.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:14.537Z,1516715654.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:14.566Z,1516715654.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:14.939Z,1516715654.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:14.974Z,1516715654.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:15.325Z,1516715655.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:15.341Z,1516715655.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:15.341Z,1516715655.341 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212 2018-01-23T13:54:15.341Z,1516715655.341 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:54:15.343Z,1516715655.343 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:15.343Z,1516715655.343 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 212 2018-01-23T13:54:15.343Z,1516715655.343 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:54:15.374Z,1516715655.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:54:15.374Z,1516715655.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:54:15.724Z,1516715655.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:15.755Z,1516715655.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:54:15.755Z,1516715655.755 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212 2018-01-23T13:54:15.756Z,1516715655.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:54:15.756Z,1516715655.756 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 212 2018-01-23T13:54:16.125Z,1516715656.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:16.143Z,1516715656.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:54:16.143Z,1516715656.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:54:16.144Z,1516715656.144 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:54:16.144Z,1516715656.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:54:16.144Z,1516715656.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:54:16.145Z,1516715656.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:54:16.520Z,1516715656.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:16.542Z,1516715656.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:54:16.548Z,1516715656.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:16.924Z,1516715656.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:16.939Z,1516715656.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:54:16.940Z,1516715656.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:17.336Z,1516715657.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:17.355Z,1516715657.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:54:17.356Z,1516715657.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:17.739Z,1516715657.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:17.756Z,1516715657.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T13:54:17.757Z,1516715657.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:20.832Z,1516715660.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:20.847Z,1516715660.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s. 2018-01-23T13:54:20.848Z,1516715660.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:20.957Z,1516715660.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:20.987Z,1516715660.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:54:20.988Z,1516715660.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:21.305Z,1516715661.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:21.340Z,1516715661.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:54:21.341Z,1516715661.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:21.705Z,1516715661.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:21.745Z,1516715661.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:54:21.746Z,1516715661.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:22.103Z,1516715662.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:22.118Z,1516715662.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:54:22.135Z,1516715662.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:22.511Z,1516715662.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:22.542Z,1516715662.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:54:22.548Z,1516715662.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:22.915Z,1516715662.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:22.948Z,1516715662.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:54:22.949Z,1516715662.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:23.301Z,1516715663.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:23.316Z,1516715663.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:54:23.317Z,1516715663.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:23.699Z,1516715663.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:23.714Z,1516715663.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:54:23.715Z,1516715663.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:24.100Z,1516715664.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:24.114Z,1516715664.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:54:24.115Z,1516715664.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:24.498Z,1516715664.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:24.516Z,1516715664.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:54:24.517Z,1516715664.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:24.900Z,1516715664.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:24.915Z,1516715664.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:54:24.916Z,1516715664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:25.306Z,1516715665.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:25.321Z,1516715665.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:54:25.322Z,1516715665.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:25.707Z,1516715665.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:25.722Z,1516715665.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:54:25.723Z,1516715665.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:26.106Z,1516715666.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:26.124Z,1516715666.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:54:26.125Z,1516715666.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:26.501Z,1516715666.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:26.515Z,1516715666.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:54:26.516Z,1516715666.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:26.896Z,1516715666.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:26.916Z,1516715666.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:54:26.917Z,1516715666.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:27.296Z,1516715667.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:27.314Z,1516715667.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:54:27.319Z,1516715667.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:27.692Z,1516715667.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:27.728Z,1516715667.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:54:27.729Z,1516715667.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:28.108Z,1516715668.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:28.130Z,1516715668.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:54:28.135Z,1516715668.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:28.519Z,1516715668.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:28.533Z,1516715668.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:54:28.534Z,1516715668.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:28.911Z,1516715668.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:28.925Z,1516715668.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:54:28.926Z,1516715668.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:29.292Z,1516715669.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:29.318Z,1516715669.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:54:29.319Z,1516715669.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:29.692Z,1516715669.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:29.724Z,1516715669.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:54:29.725Z,1516715669.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:30.091Z,1516715670.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:30.127Z,1516715670.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:54:30.128Z,1516715670.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:30.493Z,1516715670.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:30.524Z,1516715670.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:54:30.525Z,1516715670.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:30.539Z,1516715670.539 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T13:54:30.892Z,1516715670.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:30.924Z,1516715670.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:54:30.925Z,1516715670.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:31.310Z,1516715671.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:31.334Z,1516715671.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:54:31.335Z,1516715671.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:31.714Z,1516715671.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:31.729Z,1516715671.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:54:31.730Z,1516715671.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:32.108Z,1516715672.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:32.128Z,1516715672.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:54:32.129Z,1516715672.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:32.492Z,1516715672.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:32.521Z,1516715672.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:54:32.521Z,1516715672.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:32.890Z,1516715672.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:32.913Z,1516715672.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:54:32.914Z,1516715672.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:33.293Z,1516715673.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:33.324Z,1516715673.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:54:33.324Z,1516715673.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:33.692Z,1516715673.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:33.729Z,1516715673.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:54:33.730Z,1516715673.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:34.111Z,1516715674.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:34.130Z,1516715674.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:54:34.132Z,1516715674.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:34.513Z,1516715674.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:34.536Z,1516715674.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:54:34.536Z,1516715674.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:34.903Z,1516715674.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:34.939Z,1516715674.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:54:34.940Z,1516715674.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:35.296Z,1516715675.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:35.332Z,1516715675.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:54:35.333Z,1516715675.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:35.696Z,1516715675.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:35.717Z,1516715675.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:36.100Z,1516715676.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:36.115Z,1516715676.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:36.506Z,1516715676.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:36.541Z,1516715676.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:36.904Z,1516715676.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:36.919Z,1516715676.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:37.304Z,1516715677.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:37.324Z,1516715677.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:37.711Z,1516715677.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:37.726Z,1516715677.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:38.108Z,1516715678.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:38.123Z,1516715678.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:38.507Z,1516715678.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:38.522Z,1516715678.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:38.893Z,1516715678.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:38.929Z,1516715678.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:39.301Z,1516715679.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:39.324Z,1516715679.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:39.740Z,1516715679.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:39.766Z,1516715679.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:40.110Z,1516715680.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:40.131Z,1516715680.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:40.516Z,1516715680.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:40.531Z,1516715680.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:40.911Z,1516715680.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:40.941Z,1516715680.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:41.306Z,1516715681.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:41.321Z,1516715681.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:41.693Z,1516715681.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:41.730Z,1516715681.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:42.092Z,1516715682.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:42.122Z,1516715682.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:42.493Z,1516715682.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:42.529Z,1516715682.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:42.892Z,1516715682.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:42.920Z,1516715682.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:43.309Z,1516715683.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:43.332Z,1516715683.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:43.715Z,1516715683.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:43.737Z,1516715683.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:44.111Z,1516715684.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:44.127Z,1516715684.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:44.492Z,1516715684.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:44.529Z,1516715684.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:44.890Z,1516715684.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:44.917Z,1516715684.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:45.293Z,1516715685.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:45.324Z,1516715685.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:45.692Z,1516715685.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:45.731Z,1516715685.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:46.103Z,1516715686.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:46.129Z,1516715686.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:46.507Z,1516715686.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:46.540Z,1516715686.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:46.902Z,1516715686.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:46.934Z,1516715686.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:47.294Z,1516715687.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:47.309Z,1516715687.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:47.693Z,1516715687.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:47.713Z,1516715687.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:48.100Z,1516715688.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:48.115Z,1516715688.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:48.499Z,1516715688.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:48.514Z,1516715688.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:48.904Z,1516715688.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:48.941Z,1516715688.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:49.315Z,1516715689.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:49.349Z,1516715689.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:49.711Z,1516715689.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:49.726Z,1516715689.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:50.115Z,1516715690.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:50.130Z,1516715690.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:50.501Z,1516715690.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:50.516Z,1516715690.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:50.896Z,1516715690.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:50.916Z,1516715690.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:51.296Z,1516715691.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:51.330Z,1516715691.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:51.700Z,1516715691.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:51.715Z,1516715691.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:52.110Z,1516715692.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:52.126Z,1516715692.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:52.514Z,1516715692.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:52.529Z,1516715692.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:52.911Z,1516715692.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:52.926Z,1516715692.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:53.297Z,1516715693.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:53.319Z,1516715693.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:53.696Z,1516715693.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:53.718Z,1516715693.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:54.112Z,1516715694.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:54.126Z,1516715694.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:54.514Z,1516715694.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:54.533Z,1516715694.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:54.910Z,1516715694.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:54.925Z,1516715694.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:55.302Z,1516715695.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:55.320Z,1516715695.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:55.696Z,1516715695.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:55.719Z,1516715695.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:56.110Z,1516715696.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:56.125Z,1516715696.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:56.514Z,1516715696.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:56.536Z,1516715696.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:56.910Z,1516715696.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:56.925Z,1516715696.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:57.299Z,1516715697.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:57.319Z,1516715697.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:57.701Z,1516715697.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:57.720Z,1516715697.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:58.111Z,1516715698.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:58.126Z,1516715698.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:58.514Z,1516715698.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:58.529Z,1516715698.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:58.911Z,1516715698.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:58.932Z,1516715698.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:59.303Z,1516715699.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:59.318Z,1516715699.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:54:59.695Z,1516715699.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:54:59.727Z,1516715699.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:00.111Z,1516715700.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:00.126Z,1516715700.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:00.514Z,1516715700.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:00.533Z,1516715700.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:00.911Z,1516715700.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:00.925Z,1516715700.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:01.300Z,1516715701.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:01.321Z,1516715701.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:01.696Z,1516715701.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:01.718Z,1516715701.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:02.110Z,1516715702.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:02.125Z,1516715702.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:02.511Z,1516715702.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:02.530Z,1516715702.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:02.908Z,1516715702.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:02.935Z,1516715702.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:03.293Z,1516715703.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:03.319Z,1516715703.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:03.697Z,1516715703.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:03.724Z,1516715703.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:04.111Z,1516715704.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:04.126Z,1516715704.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:04.512Z,1516715704.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:04.532Z,1516715704.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:04.911Z,1516715704.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:04.932Z,1516715704.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:05.293Z,1516715705.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:05.324Z,1516715705.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:05.696Z,1516715705.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:05.728Z,1516715705.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:06.103Z,1516715706.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:06.141Z,1516715706.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:06.503Z,1516715706.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:06.529Z,1516715706.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:06.903Z,1516715706.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:06.929Z,1516715706.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:07.293Z,1516715707.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:07.329Z,1516715707.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:07.693Z,1516715707.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:07.713Z,1516715707.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:08.111Z,1516715708.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:08.137Z,1516715708.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:08.528Z,1516715708.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:08.543Z,1516715708.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:08.907Z,1516715708.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:08.934Z,1516715708.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:09.298Z,1516715709.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:09.317Z,1516715709.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:09.698Z,1516715709.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:09.721Z,1516715709.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:10.115Z,1516715710.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:10.146Z,1516715710.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:10.507Z,1516715710.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:10.522Z,1516715710.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:10.903Z,1516715710.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:10.919Z,1516715710.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:11.300Z,1516715711.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:11.315Z,1516715711.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:11.698Z,1516715711.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:11.717Z,1516715711.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:12.107Z,1516715712.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:12.129Z,1516715712.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:12.510Z,1516715712.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:12.533Z,1516715712.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:12.911Z,1516715712.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:12.926Z,1516715712.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:13.300Z,1516715713.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:13.324Z,1516715713.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:13.692Z,1516715713.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:13.729Z,1516715713.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:14.116Z,1516715714.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:14.137Z,1516715714.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:14.516Z,1516715714.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:14.532Z,1516715714.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:14.916Z,1516715714.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:14.930Z,1516715714.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:15.311Z,1516715715.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:15.326Z,1516715715.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:15.697Z,1516715715.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:15.733Z,1516715715.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:16.120Z,1516715716.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:16.135Z,1516715716.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:16.523Z,1516715716.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:16.538Z,1516715716.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:16.908Z,1516715716.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:16.939Z,1516715716.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:17.298Z,1516715717.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:17.334Z,1516715717.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:17.692Z,1516715717.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:17.733Z,1516715717.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:18.123Z,1516715718.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:18.139Z,1516715718.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:21.224Z,1516715721.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:21.239Z,1516715721.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:21.368Z,1516715721.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:21.401Z,1516715721.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:21.691Z,1516715721.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:21.710Z,1516715721.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:22.093Z,1516715722.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:22.108Z,1516715722.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:22.490Z,1516715722.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:22.505Z,1516715722.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:22.889Z,1516715722.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:22.908Z,1516715722.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:23.294Z,1516715723.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:23.316Z,1516715723.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:23.707Z,1516715723.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:23.722Z,1516715723.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:24.100Z,1516715724.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:24.114Z,1516715724.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:24.489Z,1516715724.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:24.504Z,1516715724.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:24.884Z,1516715724.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:24.906Z,1516715724.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:25.288Z,1516715725.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:25.303Z,1516715725.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:25.690Z,1516715725.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:25.712Z,1516715725.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:26.084Z,1516715726.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:26.104Z,1516715726.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:26.498Z,1516715726.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:26.517Z,1516715726.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:26.898Z,1516715726.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:26.913Z,1516715726.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:27.295Z,1516715727.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:27.318Z,1516715727.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:27.681Z,1516715727.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:27.707Z,1516715727.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:28.080Z,1516715728.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:28.116Z,1516715728.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:28.482Z,1516715728.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:28.507Z,1516715728.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:28.881Z,1516715728.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:28.913Z,1516715728.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:29.297Z,1516715729.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:29.317Z,1516715729.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:29.703Z,1516715729.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:29.718Z,1516715729.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:30.096Z,1516715730.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:30.125Z,1516715730.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:30.480Z,1516715730.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:30.509Z,1516715730.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:30.878Z,1516715730.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:30.913Z,1516715730.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:31.281Z,1516715731.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:31.313Z,1516715731.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:31.681Z,1516715731.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:31.720Z,1516715731.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:32.078Z,1516715732.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:32.101Z,1516715732.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:32.499Z,1516715732.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:32.514Z,1516715732.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:32.904Z,1516715732.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:32.918Z,1516715732.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:33.299Z,1516715733.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:33.314Z,1516715733.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:33.680Z,1516715733.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:33.713Z,1516715733.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:34.080Z,1516715734.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:34.114Z,1516715734.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:34.482Z,1516715734.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:34.516Z,1516715734.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:34.880Z,1516715734.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:34.917Z,1516715734.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:35.290Z,1516715735.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:35.320Z,1516715735.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:35.699Z,1516715735.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:35.715Z,1516715735.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:36.095Z,1516715736.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:36.117Z,1516715736.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:36.481Z,1516715736.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:36.513Z,1516715736.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:36.881Z,1516715736.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:36.908Z,1516715736.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:37.280Z,1516715737.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:37.313Z,1516715737.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:37.685Z,1516715737.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:37.725Z,1516715737.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:38.078Z,1516715738.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:38.093Z,1516715738.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:38.491Z,1516715738.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:38.522Z,1516715738.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:38.903Z,1516715738.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:38.937Z,1516715738.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:39.295Z,1516715739.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:39.326Z,1516715739.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:39.692Z,1516715739.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:39.729Z,1516715739.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:40.088Z,1516715740.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:40.103Z,1516715740.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:40.486Z,1516715740.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:40.505Z,1516715740.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:40.893Z,1516715740.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:40.913Z,1516715740.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:41.295Z,1516715741.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:41.311Z,1516715741.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:41.699Z,1516715741.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:41.714Z,1516715741.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:42.094Z,1516715742.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:42.113Z,1516715742.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:42.490Z,1516715742.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:42.505Z,1516715742.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:42.885Z,1516715742.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:42.906Z,1516715742.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:43.285Z,1516715743.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:43.306Z,1516715743.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:43.688Z,1516715743.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:43.715Z,1516715743.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:44.084Z,1516715744.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:44.104Z,1516715744.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:44.499Z,1516715744.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:44.514Z,1516715744.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:44.899Z,1516715744.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:44.914Z,1516715744.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:45.295Z,1516715745.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:45.318Z,1516715745.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:45.690Z,1516715745.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:45.705Z,1516715745.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:46.084Z,1516715746.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:46.121Z,1516715746.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:46.494Z,1516715746.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:46.509Z,1516715746.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:46.880Z,1516715746.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:46.913Z,1516715746.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:47.294Z,1516715747.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:47.326Z,1516715747.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:47.707Z,1516715747.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:47.729Z,1516715747.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:48.099Z,1516715748.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:48.114Z,1516715748.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:48.481Z,1516715748.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:48.517Z,1516715748.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:48.885Z,1516715748.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:48.916Z,1516715748.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:49.280Z,1516715749.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:49.317Z,1516715749.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:49.681Z,1516715749.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:49.721Z,1516715749.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:50.085Z,1516715750.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:50.120Z,1516715750.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:50.491Z,1516715750.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:50.517Z,1516715750.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:50.895Z,1516715750.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:50.934Z,1516715750.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:51.295Z,1516715751.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:51.321Z,1516715751.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:51.682Z,1516715751.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:51.697Z,1516715751.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:52.085Z,1516715752.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:52.121Z,1516715752.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:52.486Z,1516715752.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:52.501Z,1516715752.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:52.888Z,1516715752.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:52.903Z,1516715752.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:53.303Z,1516715753.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:53.330Z,1516715753.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:53.703Z,1516715753.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:53.727Z,1516715753.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:54.099Z,1516715754.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:54.130Z,1516715754.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:54.492Z,1516715754.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:54.507Z,1516715754.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:54.891Z,1516715754.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:54.906Z,1516715754.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:55.291Z,1516715755.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:55.306Z,1516715755.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:55.691Z,1516715755.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:55.706Z,1516715755.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:56.089Z,1516715756.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:56.108Z,1516715756.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:56.504Z,1516715756.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:56.534Z,1516715756.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:56.895Z,1516715756.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:56.933Z,1516715756.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:57.304Z,1516715757.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:57.338Z,1516715757.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:57.690Z,1516715757.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:57.706Z,1516715757.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:58.089Z,1516715758.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:58.117Z,1516715758.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:58.488Z,1516715758.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:58.512Z,1516715758.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:58.893Z,1516715758.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:58.909Z,1516715758.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:59.300Z,1516715759.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:59.321Z,1516715759.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:55:59.703Z,1516715759.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:55:59.718Z,1516715759.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:00.097Z,1516715760.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:00.120Z,1516715760.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:00.481Z,1516715760.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:00.509Z,1516715760.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:00.881Z,1516715760.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:00.914Z,1516715760.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:01.280Z,1516715761.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:01.314Z,1516715761.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:01.681Z,1516715761.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:01.725Z,1516715761.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:02.093Z,1516715762.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:02.108Z,1516715762.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:02.494Z,1516715762.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:02.522Z,1516715762.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:02.903Z,1516715762.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:02.918Z,1516715762.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:03.296Z,1516715763.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:03.317Z,1516715763.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:03.680Z,1516715763.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:03.713Z,1516715763.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:04.080Z,1516715764.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:04.118Z,1516715764.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:04.485Z,1516715764.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:04.512Z,1516715764.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:04.889Z,1516715764.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:04.915Z,1516715764.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:05.295Z,1516715765.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:05.319Z,1516715765.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:05.703Z,1516715765.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:05.718Z,1516715765.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:06.095Z,1516715766.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:06.126Z,1516715766.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:06.481Z,1516715766.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:06.514Z,1516715766.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:06.881Z,1516715766.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:06.912Z,1516715766.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:07.280Z,1516715767.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:07.312Z,1516715767.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:07.681Z,1516715767.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:07.718Z,1516715767.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:08.085Z,1516715768.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:08.110Z,1516715768.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:08.495Z,1516715768.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:08.526Z,1516715768.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:08.903Z,1516715768.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:08.918Z,1516715768.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:09.299Z,1516715769.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:09.314Z,1516715769.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:09.680Z,1516715769.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:09.720Z,1516715769.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:10.105Z,1516715770.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:10.156Z,1516715770.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:10.487Z,1516715770.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:10.521Z,1516715770.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:10.886Z,1516715770.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:10.916Z,1516715770.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:11.293Z,1516715771.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:11.361Z,1516715771.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:11.709Z,1516715771.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:11.733Z,1516715771.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:12.098Z,1516715772.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:12.136Z,1516715772.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:12.485Z,1516715772.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:12.525Z,1516715772.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:12.886Z,1516715772.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:12.919Z,1516715772.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:13.284Z,1516715773.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:13.321Z,1516715773.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:13.681Z,1516715773.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:13.751Z,1516715773.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:14.080Z,1516715774.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:14.133Z,1516715774.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:14.506Z,1516715774.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:14.536Z,1516715774.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:14.897Z,1516715774.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:14.936Z,1516715774.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:15.298Z,1516715775.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:15.332Z,1516715775.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:15.688Z,1516715775.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:15.737Z,1516715775.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:16.082Z,1516715776.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:16.109Z,1516715776.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:16.495Z,1516715776.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:16.519Z,1516715776.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:16.894Z,1516715776.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:16.914Z,1516715776.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:16.921Z,1516715776.921 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T13:56:16.921Z,1516715776.921 [Default:CheckIn:C.Wait] Stopped 2018-01-23T13:56:16.921Z,1516715776.921 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T13:56:16.921Z,1516715776.921 [Default:CheckIn:D] Running Loop=1 2018-01-23T13:56:17.296Z,1516715777.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:17.324Z,1516715777.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:17.339Z,1516715777.339 [Default:CheckIn:D] Stopped 2018-01-23T13:56:17.339Z,1516715777.339 [Default:CheckIn:E] Running Loop=1 2018-01-23T13:56:17.727Z,1516715777.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:17.754Z,1516715777.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:17.762Z,1516715777.762 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 638.421094 min 2018-01-23T13:56:17.762Z,1516715777.762 [Default:CheckIn:E] Stopped 2018-01-23T13:56:17.762Z,1516715777.762 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T13:56:17.762Z,1516715777.762 [Default:CheckIn] Stopped 2018-01-23T13:56:17.762Z,1516715777.762 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T13:56:17.787Z,1516715777.787 [Default:CheckIn](INFO): Running loop #63 2018-01-23T13:56:17.787Z,1516715777.787 [Default:CheckIn] Running Loop=63 2018-01-23T13:56:17.787Z,1516715777.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T13:56:17.787Z,1516715777.787 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T13:56:18.105Z,1516715778.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:18.129Z,1516715778.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:23.272Z,1516715783.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:23.288Z,1516715783.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:23.385Z,1516715783.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:23.421Z,1516715783.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:23.743Z,1516715783.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:23.765Z,1516715783.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:24.147Z,1516715784.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:24.162Z,1516715784.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:24.543Z,1516715784.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:24.565Z,1516715784.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:24.930Z,1516715784.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:24.945Z,1516715784.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:25.328Z,1516715785.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:25.349Z,1516715785.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:25.731Z,1516715785.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:25.746Z,1516715785.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:26.128Z,1516715786.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:26.149Z,1516715786.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:26.543Z,1516715786.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:26.559Z,1516715786.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:26.969Z,1516715786.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:26.989Z,1516715786.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:27.346Z,1516715787.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:27.369Z,1516715787.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:27.730Z,1516715787.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:27.782Z,1516715787.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:28.134Z,1516715788.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:28.165Z,1516715788.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:28.533Z,1516715788.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:28.565Z,1516715788.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:28.933Z,1516715788.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:28.965Z,1516715788.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:29.345Z,1516715789.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:29.392Z,1516715789.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:29.749Z,1516715789.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:29.777Z,1516715789.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:30.149Z,1516715790.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:30.206Z,1516715790.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:30.539Z,1516715790.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:30.562Z,1516715790.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:30.943Z,1516715790.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:30.962Z,1516715790.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:31.330Z,1516715791.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:31.377Z,1516715791.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:31.740Z,1516715791.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:31.760Z,1516715791.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:32.134Z,1516715792.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:32.170Z,1516715792.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:32.558Z,1516715792.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:32.601Z,1516715792.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:32.954Z,1516715792.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:32.993Z,1516715792.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:33.358Z,1516715793.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:33.393Z,1516715793.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:33.739Z,1516715793.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:33.770Z,1516715793.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:34.129Z,1516715794.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:34.156Z,1516715794.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:34.560Z,1516715794.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:34.578Z,1516715794.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:34.928Z,1516715794.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:34.956Z,1516715794.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:35.348Z,1516715795.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:35.363Z,1516715795.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:35.748Z,1516715795.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:35.771Z,1516715795.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:36.152Z,1516715796.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:36.166Z,1516715796.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:36.529Z,1516715796.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:36.565Z,1516715796.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:36.932Z,1516715796.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:36.965Z,1516715796.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:37.329Z,1516715797.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:37.367Z,1516715797.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:37.730Z,1516715797.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:37.757Z,1516715797.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:38.129Z,1516715798.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:38.144Z,1516715798.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:38.543Z,1516715798.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:38.573Z,1516715798.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:38.944Z,1516715798.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:38.977Z,1516715798.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:39.348Z,1516715799.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:39.374Z,1516715799.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:39.736Z,1516715799.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:39.751Z,1516715799.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:40.131Z,1516715800.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:40.148Z,1516715800.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:40.542Z,1516715800.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:40.581Z,1516715800.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:40.941Z,1516715800.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:40.956Z,1516715800.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:41.353Z,1516715801.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:41.378Z,1516715801.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:41.751Z,1516715801.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:41.784Z,1516715801.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:42.152Z,1516715802.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:42.184Z,1516715802.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:42.535Z,1516715802.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:42.558Z,1516715802.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:42.936Z,1516715802.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:42.952Z,1516715802.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:43.336Z,1516715803.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:43.353Z,1516715803.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:43.736Z,1516715803.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:43.752Z,1516715803.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:44.134Z,1516715804.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:44.163Z,1516715804.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:44.542Z,1516715804.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:44.559Z,1516715804.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:44.943Z,1516715804.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:44.961Z,1516715804.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:45.347Z,1516715805.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:45.363Z,1516715805.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:45.738Z,1516715805.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:45.753Z,1516715805.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:46.133Z,1516715806.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:46.153Z,1516715806.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:46.533Z,1516715806.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:46.564Z,1516715806.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:46.936Z,1516715806.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:46.965Z,1516715806.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:47.348Z,1516715807.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:47.363Z,1516715807.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:47.750Z,1516715807.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:47.765Z,1516715807.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:48.148Z,1516715808.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:48.163Z,1516715808.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:48.532Z,1516715808.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:48.555Z,1516715808.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:48.932Z,1516715808.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:48.955Z,1516715808.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:49.338Z,1516715809.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:49.360Z,1516715809.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:49.736Z,1516715809.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:49.757Z,1516715809.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:50.135Z,1516715810.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:50.157Z,1516715810.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:50.548Z,1516715810.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:50.563Z,1516715810.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:50.946Z,1516715810.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:50.962Z,1516715810.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:51.346Z,1516715811.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:51.362Z,1516715811.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:51.738Z,1516715811.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:51.753Z,1516715811.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:52.126Z,1516715812.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:52.158Z,1516715812.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:52.541Z,1516715812.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:52.557Z,1516715812.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:52.928Z,1516715812.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:52.964Z,1516715812.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:53.348Z,1516715813.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:53.363Z,1516715813.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:53.751Z,1516715813.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:53.766Z,1516715813.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:54.142Z,1516715814.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:54.176Z,1516715814.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:54.532Z,1516715814.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:54.565Z,1516715814.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:54.928Z,1516715814.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:54.955Z,1516715814.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:55.334Z,1516715815.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:55.361Z,1516715815.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:55.734Z,1516715815.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:55.760Z,1516715815.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:56.128Z,1516715816.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:56.155Z,1516715816.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:56.546Z,1516715816.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:56.569Z,1516715816.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:56.945Z,1516715816.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:56.977Z,1516715816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:57.340Z,1516715817.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:57.373Z,1516715817.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:57.728Z,1516715817.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:57.768Z,1516715817.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:58.126Z,1516715818.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:58.141Z,1516715818.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:58.529Z,1516715818.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:58.544Z,1516715818.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:58.928Z,1516715818.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:58.949Z,1516715818.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:59.343Z,1516715819.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:59.370Z,1516715819.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:56:59.743Z,1516715819.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:56:59.781Z,1516715819.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:00.148Z,1516715820.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:00.180Z,1516715820.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:00.536Z,1516715820.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:00.553Z,1516715820.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:00.933Z,1516715820.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:00.953Z,1516715820.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:01.334Z,1516715821.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:01.361Z,1516715821.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:01.738Z,1516715821.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:01.754Z,1516715821.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:02.133Z,1516715822.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:02.153Z,1516715822.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:02.543Z,1516715822.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:02.583Z,1516715822.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:02.939Z,1516715822.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:02.955Z,1516715822.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:03.343Z,1516715823.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:03.381Z,1516715823.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:03.733Z,1516715823.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:03.761Z,1516715823.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:04.132Z,1516715824.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:04.166Z,1516715824.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:04.541Z,1516715824.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:04.557Z,1516715824.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:04.933Z,1516715824.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:04.957Z,1516715824.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:05.346Z,1516715825.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:05.361Z,1516715825.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:05.746Z,1516715825.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:05.761Z,1516715825.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:06.148Z,1516715826.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:06.163Z,1516715826.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:06.536Z,1516715826.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:06.552Z,1516715826.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:06.932Z,1516715826.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:06.961Z,1516715826.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:07.342Z,1516715827.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:07.357Z,1516715827.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:07.732Z,1516715827.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:07.764Z,1516715827.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:08.140Z,1516715828.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:08.155Z,1516715828.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:08.546Z,1516715828.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:08.570Z,1516715828.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:08.952Z,1516715828.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:08.966Z,1516715828.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:09.344Z,1516715829.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:09.376Z,1516715829.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:09.729Z,1516715829.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:09.767Z,1516715829.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:10.140Z,1516715830.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:10.160Z,1516715830.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:10.162Z,1516715830.162 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:10.162Z,1516715830.162 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 213 2018-01-23T13:57:10.162Z,1516715830.162 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T13:57:10.174Z,1516715830.174 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T13:57:10.529Z,1516715830.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:10.565Z,1516715830.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:10.590Z,1516715830.590 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T13:57:10.590Z,1516715830.590 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 213 2018-01-23T13:57:10.932Z,1516715830.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:10.961Z,1516715830.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:10.963Z,1516715830.963 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T13:57:10.963Z,1516715830.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:57:10.964Z,1516715830.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:57:11.348Z,1516715831.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:11.363Z,1516715831.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:11.751Z,1516715831.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:11.772Z,1516715831.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:12.148Z,1516715832.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:12.169Z,1516715832.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:12.528Z,1516715832.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:12.561Z,1516715832.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:12.928Z,1516715832.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:12.965Z,1516715832.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:13.329Z,1516715833.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:13.356Z,1516715833.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:13.729Z,1516715833.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:13.760Z,1516715833.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:14.133Z,1516715834.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:14.169Z,1516715834.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:14.540Z,1516715834.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:14.577Z,1516715834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:14.948Z,1516715834.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:14.974Z,1516715834.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:15.339Z,1516715835.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:15.377Z,1516715835.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:15.729Z,1516715835.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:15.744Z,1516715835.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:16.133Z,1516715836.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:16.153Z,1516715836.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:16.153Z,1516715836.153 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 213 2018-01-23T13:57:16.153Z,1516715836.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T13:57:16.175Z,1516715836.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:16.175Z,1516715836.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 213 2018-01-23T13:57:16.175Z,1516715836.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T13:57:16.200Z,1516715836.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T13:57:16.201Z,1516715836.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T13:57:16.541Z,1516715836.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:16.588Z,1516715836.588 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T13:57:16.591Z,1516715836.591 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 213 2018-01-23T13:57:16.591Z,1516715836.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T13:57:16.592Z,1516715836.592 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 213 2018-01-23T13:57:16.933Z,1516715836.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:16.952Z,1516715836.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T13:57:16.953Z,1516715836.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:57:16.953Z,1516715836.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:57:16.953Z,1516715836.953 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T13:57:16.954Z,1516715836.954 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T13:57:16.954Z,1516715836.954 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T13:57:17.340Z,1516715837.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:17.355Z,1516715837.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T13:57:17.356Z,1516715837.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:17.744Z,1516715837.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:17.759Z,1516715837.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T13:57:17.760Z,1516715837.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:18.146Z,1516715838.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:18.161Z,1516715838.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T13:57:18.162Z,1516715838.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:21.229Z,1516715841.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:21.251Z,1516715841.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s. 2018-01-23T13:57:21.252Z,1516715841.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:21.350Z,1516715841.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:21.366Z,1516715841.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T13:57:21.367Z,1516715841.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:21.715Z,1516715841.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:21.740Z,1516715841.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T13:57:21.741Z,1516715841.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:22.132Z,1516715842.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:22.146Z,1516715842.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T13:57:22.147Z,1516715842.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:22.512Z,1516715842.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:22.542Z,1516715842.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T13:57:22.548Z,1516715842.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:22.905Z,1516715842.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:22.919Z,1516715842.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T13:57:22.920Z,1516715842.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:23.301Z,1516715843.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:23.327Z,1516715843.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T13:57:23.328Z,1516715843.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:23.702Z,1516715843.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:23.729Z,1516715843.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T13:57:23.730Z,1516715843.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:24.102Z,1516715844.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:24.125Z,1516715844.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T13:57:24.126Z,1516715844.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:24.507Z,1516715844.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:24.522Z,1516715844.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T13:57:24.523Z,1516715844.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:24.907Z,1516715844.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:24.922Z,1516715844.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T13:57:24.923Z,1516715844.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:25.308Z,1516715845.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:25.328Z,1516715845.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T13:57:25.329Z,1516715845.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:25.709Z,1516715845.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:25.723Z,1516715845.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T13:57:25.724Z,1516715845.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:26.101Z,1516715846.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:26.120Z,1516715846.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T13:57:26.121Z,1516715846.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:26.504Z,1516715846.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:26.522Z,1516715846.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T13:57:26.523Z,1516715846.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:26.905Z,1516715846.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:26.919Z,1516715846.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T13:57:26.920Z,1516715846.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:27.310Z,1516715847.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:27.329Z,1516715847.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T13:57:27.330Z,1516715847.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:27.711Z,1516715847.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:27.726Z,1516715847.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T13:57:27.727Z,1516715847.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:28.110Z,1516715848.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:28.125Z,1516715848.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T13:57:28.126Z,1516715848.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:28.504Z,1516715848.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:28.522Z,1516715848.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T13:57:28.523Z,1516715848.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:28.909Z,1516715848.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:28.928Z,1516715848.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T13:57:28.929Z,1516715848.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:29.310Z,1516715849.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:29.325Z,1516715849.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T13:57:29.326Z,1516715849.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:29.711Z,1516715849.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:29.726Z,1516715849.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T13:57:29.727Z,1516715849.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:30.110Z,1516715850.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:30.128Z,1516715850.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T13:57:30.129Z,1516715850.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:30.510Z,1516715850.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:30.524Z,1516715850.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T13:57:30.525Z,1516715850.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:30.901Z,1516715850.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:30.920Z,1516715850.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T13:57:30.921Z,1516715850.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:31.309Z,1516715851.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:31.328Z,1516715851.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T13:57:31.329Z,1516715851.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:31.723Z,1516715851.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:31.737Z,1516715851.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T13:57:31.738Z,1516715851.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:32.108Z,1516715852.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:32.131Z,1516715852.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T13:57:32.132Z,1516715852.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:32.512Z,1516715852.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:32.532Z,1516715852.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T13:57:32.533Z,1516715852.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:32.905Z,1516715852.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:32.919Z,1516715852.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T13:57:32.920Z,1516715852.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:33.331Z,1516715853.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:33.380Z,1516715853.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T13:57:33.381Z,1516715853.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:33.719Z,1516715853.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:33.734Z,1516715853.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T13:57:33.735Z,1516715853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:34.116Z,1516715854.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:34.136Z,1516715854.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T13:57:34.137Z,1516715854.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:34.507Z,1516715854.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:34.522Z,1516715854.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T13:57:34.523Z,1516715854.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:34.904Z,1516715854.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:34.926Z,1516715854.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T13:57:34.927Z,1516715854.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:35.320Z,1516715855.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:35.335Z,1516715855.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T13:57:35.336Z,1516715855.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:35.722Z,1516715855.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:35.736Z,1516715855.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T13:57:35.737Z,1516715855.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:36.116Z,1516715856.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:36.130Z,1516715856.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T13:57:36.131Z,1516715856.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:36.497Z,1516715856.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:36.534Z,1516715856.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:36.908Z,1516715856.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:36.927Z,1516715856.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:37.324Z,1516715857.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:37.339Z,1516715857.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:37.720Z,1516715857.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:37.740Z,1516715857.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:38.112Z,1516715858.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:38.139Z,1516715858.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:38.502Z,1516715858.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:38.528Z,1516715858.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:38.918Z,1516715858.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:38.933Z,1516715858.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:39.320Z,1516715859.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:39.335Z,1516715859.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:39.719Z,1516715859.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:39.734Z,1516715859.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:40.116Z,1516715860.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:40.143Z,1516715860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:40.498Z,1516715860.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:40.529Z,1516715860.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:40.898Z,1516715860.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:40.913Z,1516715860.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:41.297Z,1516715861.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:41.317Z,1516715861.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:41.716Z,1516715861.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:41.742Z,1516715861.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:42.131Z,1516715862.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:42.146Z,1516715862.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:42.520Z,1516715862.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:42.553Z,1516715862.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:42.898Z,1516715862.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:42.913Z,1516715862.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:43.309Z,1516715863.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:43.349Z,1516715863.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:43.706Z,1516715863.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:43.721Z,1516715863.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:44.104Z,1516715864.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:44.123Z,1516715864.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:44.507Z,1516715864.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:44.523Z,1516715864.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:44.912Z,1516715864.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:44.927Z,1516715864.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:45.312Z,1516715865.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:45.326Z,1516715865.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:45.713Z,1516715865.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:45.733Z,1516715865.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:46.104Z,1516715866.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:46.120Z,1516715866.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:46.502Z,1516715866.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:46.529Z,1516715866.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:46.908Z,1516715866.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:46.923Z,1516715866.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:47.309Z,1516715867.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:47.333Z,1516715867.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:47.710Z,1516715867.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:47.733Z,1516715867.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:48.117Z,1516715868.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:48.133Z,1516715868.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:48.515Z,1516715868.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:48.530Z,1516715868.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:48.908Z,1516715868.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:48.929Z,1516715868.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:49.309Z,1516715869.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:49.329Z,1516715869.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:49.713Z,1516715869.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:49.729Z,1516715869.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:50.108Z,1516715870.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:50.129Z,1516715870.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:50.516Z,1516715870.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:50.537Z,1516715870.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:50.920Z,1516715870.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:50.935Z,1516715870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:51.318Z,1516715871.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:51.333Z,1516715871.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:51.708Z,1516715871.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:51.733Z,1516715871.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:52.108Z,1516715872.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:52.129Z,1516715872.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:52.514Z,1516715872.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:52.529Z,1516715872.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:52.919Z,1516715872.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:52.934Z,1516715872.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:53.318Z,1516715873.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:53.333Z,1516715873.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:53.719Z,1516715873.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:53.734Z,1516715873.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:54.120Z,1516715874.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:54.141Z,1516715874.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:54.515Z,1516715874.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:54.551Z,1516715874.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:54.913Z,1516715874.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:54.929Z,1516715874.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:55.300Z,1516715875.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:55.337Z,1516715875.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:55.706Z,1516715875.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:55.737Z,1516715875.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:56.106Z,1516715876.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:56.140Z,1516715876.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:56.525Z,1516715876.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:56.540Z,1516715876.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:56.918Z,1516715876.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:56.951Z,1516715876.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:57.325Z,1516715877.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:57.345Z,1516715877.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:57.701Z,1516715877.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:57.733Z,1516715877.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:58.098Z,1516715878.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:58.141Z,1516715878.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:58.504Z,1516715878.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:58.532Z,1516715878.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:58.900Z,1516715878.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:58.936Z,1516715878.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:59.296Z,1516715879.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:59.341Z,1516715879.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:57:59.711Z,1516715879.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:57:59.749Z,1516715879.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:00.113Z,1516715880.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:00.145Z,1516715880.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:00.511Z,1516715880.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:00.544Z,1516715880.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:00.896Z,1516715880.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:00.944Z,1516715880.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:01.296Z,1516715881.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:01.331Z,1516715881.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:01.703Z,1516715881.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:01.718Z,1516715881.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:02.106Z,1516715882.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:02.121Z,1516715882.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:02.516Z,1516715882.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:02.548Z,1516715882.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:02.917Z,1516715882.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:02.950Z,1516715882.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:03.313Z,1516715883.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:03.348Z,1516715883.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:03.710Z,1516715883.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:03.725Z,1516715883.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:04.104Z,1516715884.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:04.130Z,1516715884.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:04.502Z,1516715884.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:04.525Z,1516715884.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:04.906Z,1516715884.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:04.922Z,1516715884.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:05.307Z,1516715885.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:05.322Z,1516715885.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:05.707Z,1516715885.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:05.748Z,1516715885.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:06.112Z,1516715886.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:06.129Z,1516715886.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:06.513Z,1516715886.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:06.528Z,1516715886.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:06.908Z,1516715886.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:06.922Z,1516715886.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:07.304Z,1516715887.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:07.354Z,1516715887.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:07.706Z,1516715887.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:07.725Z,1516715887.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:08.111Z,1516715888.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:08.126Z,1516715888.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:08.512Z,1516715888.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:08.527Z,1516715888.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:08.911Z,1516715888.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:08.938Z,1516715888.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:09.308Z,1516715889.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:09.338Z,1516715889.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:09.710Z,1516715889.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:09.733Z,1516715889.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:10.112Z,1516715890.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:10.127Z,1516715890.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:10.504Z,1516715890.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:10.539Z,1516715890.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:10.909Z,1516715890.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:10.928Z,1516715890.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:11.305Z,1516715891.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:11.323Z,1516715891.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:11.716Z,1516715891.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:11.731Z,1516715891.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:12.113Z,1516715892.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:12.156Z,1516715892.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:12.514Z,1516715892.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:12.533Z,1516715892.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:12.904Z,1516715892.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:12.923Z,1516715892.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:13.300Z,1516715893.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:13.321Z,1516715893.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:13.706Z,1516715893.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:13.735Z,1516715893.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:14.100Z,1516715894.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:14.124Z,1516715894.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:14.516Z,1516715894.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:14.533Z,1516715894.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:14.920Z,1516715894.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:14.935Z,1516715894.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:15.318Z,1516715895.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:15.359Z,1516715895.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:15.700Z,1516715895.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:15.722Z,1516715895.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:16.103Z,1516715896.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:16.136Z,1516715896.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:16.503Z,1516715896.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:16.527Z,1516715896.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:16.901Z,1516715896.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:16.956Z,1516715896.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:17.309Z,1516715897.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:17.323Z,1516715897.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:17.715Z,1516715897.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:17.733Z,1516715897.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:18.121Z,1516715898.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:18.141Z,1516715898.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:18.519Z,1516715898.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:18.560Z,1516715898.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:21.616Z,1516715901.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:21.632Z,1516715901.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:21.737Z,1516715901.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:21.773Z,1516715901.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:22.095Z,1516715902.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:22.139Z,1516715902.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:22.516Z,1516715902.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:22.536Z,1516715902.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:22.895Z,1516715902.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:22.934Z,1516715902.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:23.288Z,1516715903.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:23.324Z,1516715903.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:23.686Z,1516715903.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:23.701Z,1516715903.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:24.084Z,1516715904.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:24.105Z,1516715904.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:24.503Z,1516715904.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:24.533Z,1516715904.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:24.921Z,1516715904.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:24.936Z,1516715904.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:25.299Z,1516715905.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:25.330Z,1516715905.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:25.690Z,1516715905.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:25.705Z,1516715905.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:26.089Z,1516715906.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:26.117Z,1516715906.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:26.492Z,1516715906.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:26.507Z,1516715906.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:26.892Z,1516715906.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:26.915Z,1516715906.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:27.292Z,1516715907.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:27.313Z,1516715907.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:27.703Z,1516715907.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:27.718Z,1516715907.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:28.107Z,1516715908.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:28.129Z,1516715908.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:28.512Z,1516715908.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:28.533Z,1516715908.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:28.885Z,1516715908.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:28.911Z,1516715908.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:29.306Z,1516715909.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:29.325Z,1516715909.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:29.703Z,1516715909.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:29.719Z,1516715909.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:30.088Z,1516715910.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:30.125Z,1516715910.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:30.505Z,1516715910.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:30.520Z,1516715910.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:30.910Z,1516715910.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:30.938Z,1516715910.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:31.308Z,1516715911.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:31.323Z,1516715911.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:31.686Z,1516715911.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:31.721Z,1516715911.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:32.085Z,1516715912.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:32.117Z,1516715912.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:32.485Z,1516715912.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:32.521Z,1516715912.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:32.886Z,1516715912.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:32.918Z,1516715912.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:33.285Z,1516715913.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:33.321Z,1516715913.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:33.696Z,1516715913.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:33.732Z,1516715913.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:34.108Z,1516715914.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:34.144Z,1516715914.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:34.503Z,1516715914.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:34.533Z,1516715914.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:34.888Z,1516715914.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:34.905Z,1516715914.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:35.296Z,1516715915.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:35.337Z,1516715915.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:35.694Z,1516715915.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:35.709Z,1516715915.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:36.092Z,1516715916.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:36.107Z,1516715916.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:36.495Z,1516715916.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:36.511Z,1516715916.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:36.900Z,1516715916.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:36.921Z,1516715916.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:37.303Z,1516715917.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:37.318Z,1516715917.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:37.695Z,1516715917.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:37.710Z,1516715917.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:38.094Z,1516715918.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:38.109Z,1516715918.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:38.488Z,1516715918.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:38.519Z,1516715918.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:38.889Z,1516715918.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:38.925Z,1516715918.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:39.293Z,1516715919.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:39.309Z,1516715919.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:39.703Z,1516715919.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:39.725Z,1516715919.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:40.107Z,1516715920.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:40.129Z,1516715920.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:40.503Z,1516715920.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:40.518Z,1516715920.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:40.885Z,1516715920.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:40.910Z,1516715920.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:41.284Z,1516715921.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:41.317Z,1516715921.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:41.685Z,1516715921.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:41.713Z,1516715921.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:42.084Z,1516715922.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:42.110Z,1516715922.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:42.502Z,1516715922.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:42.525Z,1516715922.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:42.907Z,1516715922.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:42.922Z,1516715922.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:43.300Z,1516715923.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:43.321Z,1516715923.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:43.684Z,1516715923.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:43.717Z,1516715923.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:44.083Z,1516715924.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:44.119Z,1516715924.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:44.484Z,1516715924.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:44.510Z,1516715924.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:44.885Z,1516715924.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:44.917Z,1516715924.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:45.284Z,1516715925.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:45.313Z,1516715925.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:45.704Z,1516715925.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:45.719Z,1516715925.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:46.110Z,1516715926.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:46.137Z,1516715926.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:46.494Z,1516715926.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:46.520Z,1516715926.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:46.885Z,1516715926.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:46.917Z,1516715926.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:47.288Z,1516715927.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:47.320Z,1516715927.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:47.693Z,1516715927.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:47.720Z,1516715927.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:48.089Z,1516715928.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:48.120Z,1516715928.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:48.496Z,1516715928.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:48.521Z,1516715928.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:48.899Z,1516715928.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:48.928Z,1516715928.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:49.300Z,1516715929.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:49.325Z,1516715929.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:49.684Z,1516715929.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:49.721Z,1516715929.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:50.088Z,1516715930.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:50.103Z,1516715930.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:50.493Z,1516715930.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:50.529Z,1516715930.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:50.893Z,1516715930.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:50.908Z,1516715930.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:51.292Z,1516715931.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:51.307Z,1516715931.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:51.699Z,1516715931.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:51.714Z,1516715931.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:52.099Z,1516715932.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:52.114Z,1516715932.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:52.506Z,1516715932.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:52.521Z,1516715932.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:52.896Z,1516715932.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:52.911Z,1516715932.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:53.292Z,1516715933.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:53.307Z,1516715933.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:53.693Z,1516715933.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:53.708Z,1516715933.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:54.092Z,1516715934.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:54.113Z,1516715934.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:54.498Z,1516715934.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:54.517Z,1516715934.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:54.899Z,1516715934.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:54.914Z,1516715934.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:55.298Z,1516715935.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:55.317Z,1516715935.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:55.692Z,1516715935.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:55.707Z,1516715935.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:56.093Z,1516715936.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:56.107Z,1516715936.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:56.492Z,1516715936.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:56.513Z,1516715936.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:56.892Z,1516715936.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:56.910Z,1516715936.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:57.293Z,1516715937.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:57.312Z,1516715937.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:57.700Z,1516715937.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:57.715Z,1516715937.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:58.100Z,1516715938.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:58.114Z,1516715938.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:58.498Z,1516715938.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:58.513Z,1516715938.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:58.893Z,1516715938.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:58.908Z,1516715938.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:59.292Z,1516715939.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:59.307Z,1516715939.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:58:59.694Z,1516715939.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:58:59.708Z,1516715939.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:00.092Z,1516715940.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:00.113Z,1516715940.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:00.497Z,1516715940.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:00.517Z,1516715940.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:00.898Z,1516715940.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:00.913Z,1516715940.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:01.300Z,1516715941.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:01.315Z,1516715941.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:01.692Z,1516715941.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:01.707Z,1516715941.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:02.093Z,1516715942.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:02.107Z,1516715942.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:02.492Z,1516715942.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:02.513Z,1516715942.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:02.892Z,1516715942.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:02.910Z,1516715942.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:03.293Z,1516715943.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:03.312Z,1516715943.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:03.697Z,1516715943.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:03.717Z,1516715943.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:04.099Z,1516715944.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:04.114Z,1516715944.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:04.498Z,1516715944.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:04.513Z,1516715944.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:04.892Z,1516715944.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:04.907Z,1516715944.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:05.288Z,1516715945.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:05.321Z,1516715945.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:05.699Z,1516715945.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:05.713Z,1516715945.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:06.092Z,1516715946.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:06.106Z,1516715946.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:06.515Z,1516715946.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:06.546Z,1516715946.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:06.904Z,1516715946.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:06.919Z,1516715946.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:07.303Z,1516715947.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:07.318Z,1516715947.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:07.692Z,1516715947.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:07.712Z,1516715947.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:08.095Z,1516715948.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:08.109Z,1516715948.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:08.503Z,1516715948.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:08.519Z,1516715948.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:08.907Z,1516715948.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:08.922Z,1516715948.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:09.304Z,1516715949.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:09.319Z,1516715949.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:09.703Z,1516715949.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:09.718Z,1516715949.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:10.097Z,1516715950.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:10.112Z,1516715950.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:10.504Z,1516715950.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:10.519Z,1516715950.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:10.901Z,1516715950.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:10.928Z,1516715950.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:11.304Z,1516715951.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:11.319Z,1516715951.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:11.697Z,1516715951.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:11.711Z,1516715951.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:12.082Z,1516715952.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:12.114Z,1516715952.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:12.508Z,1516715952.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:12.523Z,1516715952.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:12.910Z,1516715952.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:12.924Z,1516715952.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:13.300Z,1516715953.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:13.324Z,1516715953.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:13.685Z,1516715953.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:13.721Z,1516715953.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:14.088Z,1516715954.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:14.118Z,1516715954.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:14.508Z,1516715954.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:14.524Z,1516715954.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:14.905Z,1516715954.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:14.927Z,1516715954.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:15.308Z,1516715955.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:15.329Z,1516715955.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:15.693Z,1516715955.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:15.721Z,1516715955.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:16.089Z,1516715956.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:16.112Z,1516715956.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:16.495Z,1516715956.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:16.529Z,1516715956.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:16.895Z,1516715956.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:16.929Z,1516715956.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:17.296Z,1516715957.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:17.333Z,1516715957.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:17.690Z,1516715957.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:17.729Z,1516715957.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:18.082Z,1516715958.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:18.098Z,1516715958.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:18.496Z,1516715958.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:18.528Z,1516715958.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:18.908Z,1516715958.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:18.936Z,1516715958.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:22.004Z,1516715962.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:22.026Z,1516715962.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:22.134Z,1516715962.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:22.180Z,1516715962.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:22.473Z,1516715962.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:22.496Z,1516715962.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:22.886Z,1516715962.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:22.901Z,1516715962.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:23.280Z,1516715963.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:23.301Z,1516715963.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:23.687Z,1516715963.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:23.701Z,1516715963.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:24.091Z,1516715964.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:24.112Z,1516715964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:24.490Z,1516715964.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:24.505Z,1516715964.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:24.871Z,1516715964.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:24.894Z,1516715964.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:25.277Z,1516715965.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:25.296Z,1516715965.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:25.681Z,1516715965.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:25.697Z,1516715965.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:26.072Z,1516715966.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:26.094Z,1516715966.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:26.488Z,1516715966.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:26.502Z,1516715966.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:26.890Z,1516715966.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:26.909Z,1516715966.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:27.290Z,1516715967.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:27.309Z,1516715967.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:27.686Z,1516715967.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:27.700Z,1516715967.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:28.080Z,1516715968.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:28.095Z,1516715968.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:28.486Z,1516715968.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:28.501Z,1516715968.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:28.890Z,1516715968.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:28.905Z,1516715968.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:29.286Z,1516715969.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:29.313Z,1516715969.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:29.685Z,1516715969.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:29.700Z,1516715969.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:30.068Z,1516715970.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:30.096Z,1516715970.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:30.487Z,1516715970.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:30.502Z,1516715970.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:30.891Z,1516715970.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:30.906Z,1516715970.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:31.286Z,1516715971.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:31.301Z,1516715971.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:31.669Z,1516715971.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:31.700Z,1516715971.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:32.069Z,1516715972.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:32.096Z,1516715972.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:32.468Z,1516715972.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:32.507Z,1516715972.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:32.879Z,1516715972.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:32.905Z,1516715972.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:33.283Z,1516715973.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:33.321Z,1516715973.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:33.686Z,1516715973.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:33.712Z,1516715973.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:34.076Z,1516715974.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:34.110Z,1516715974.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:34.480Z,1516715974.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:34.510Z,1516715974.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:34.874Z,1516715974.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:34.910Z,1516715974.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:35.277Z,1516715975.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:35.328Z,1516715975.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:35.698Z,1516715975.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:35.713Z,1516715975.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:36.087Z,1516715976.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:36.113Z,1516715976.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:36.498Z,1516715976.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:36.513Z,1516715976.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:36.880Z,1516715976.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:36.911Z,1516715976.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:37.273Z,1516715977.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:37.314Z,1516715977.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:37.676Z,1516715977.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:37.710Z,1516715977.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:38.081Z,1516715978.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:38.110Z,1516715978.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:38.476Z,1516715978.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:38.490Z,1516715978.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:38.891Z,1516715978.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:38.918Z,1516715978.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:39.304Z,1516715979.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:39.318Z,1516715979.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:39.683Z,1516715979.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:39.718Z,1516715979.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:40.076Z,1516715980.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:40.112Z,1516715980.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:40.476Z,1516715980.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:40.497Z,1516715980.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:40.874Z,1516715980.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:40.889Z,1516715980.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:41.273Z,1516715981.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:41.292Z,1516715981.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:41.681Z,1516715981.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:41.701Z,1516715981.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:42.082Z,1516715982.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:42.097Z,1516715982.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:42.481Z,1516715982.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:42.501Z,1516715982.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:42.876Z,1516715982.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:42.891Z,1516715982.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:43.277Z,1516715983.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:43.292Z,1516715983.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:43.673Z,1516715983.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:43.696Z,1516715983.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:44.073Z,1516715984.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:44.095Z,1516715984.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:44.478Z,1516715984.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:44.493Z,1516715984.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:44.887Z,1516715984.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:44.902Z,1516715984.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:45.286Z,1516715985.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:45.301Z,1516715985.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:45.688Z,1516715985.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:45.705Z,1516715985.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:46.081Z,1516715986.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:46.096Z,1516715986.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:46.472Z,1516715986.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:46.490Z,1516715986.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:46.879Z,1516715986.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:46.900Z,1516715986.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:47.266Z,1516715987.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:47.293Z,1516715987.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:47.686Z,1516715987.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:47.714Z,1516715987.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:48.092Z,1516715988.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:48.107Z,1516715988.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:48.492Z,1516715988.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:48.507Z,1516715988.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:48.873Z,1516715988.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:48.896Z,1516715988.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:49.272Z,1516715989.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:49.307Z,1516715989.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:49.682Z,1516715989.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:49.697Z,1516715989.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:50.073Z,1516715990.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:50.096Z,1516715990.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:50.468Z,1516715990.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:50.505Z,1516715990.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:50.884Z,1516715990.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:50.913Z,1516715990.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:51.296Z,1516715991.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:51.311Z,1516715991.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:51.682Z,1516715991.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:51.718Z,1516715991.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:52.066Z,1516715992.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:52.081Z,1516715992.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:52.468Z,1516715992.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:52.514Z,1516715992.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:52.885Z,1516715992.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:52.927Z,1516715992.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:53.270Z,1516715993.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:53.289Z,1516715993.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:53.691Z,1516715993.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:53.726Z,1516715993.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:54.087Z,1516715994.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:54.123Z,1516715994.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:54.491Z,1516715994.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:54.522Z,1516715994.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:54.875Z,1516715994.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:54.894Z,1516715994.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:55.278Z,1516715995.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:55.293Z,1516715995.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:55.676Z,1516715995.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:55.692Z,1516715995.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:56.072Z,1516715996.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:56.097Z,1516715996.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:56.477Z,1516715996.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:56.493Z,1516715996.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:56.882Z,1516715996.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:56.898Z,1516715996.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:57.283Z,1516715997.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:57.305Z,1516715997.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:57.700Z,1516715997.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:57.714Z,1516715997.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:58.072Z,1516715998.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:58.096Z,1516715998.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:58.475Z,1516715998.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:58.494Z,1516715998.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:58.877Z,1516715998.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:58.896Z,1516715998.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:59.266Z,1516715999.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:59.297Z,1516715999.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T13:59:59.691Z,1516715999.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T13:59:59.705Z,1516715999.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:00.092Z,1516716000.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:00.106Z,1516716000.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:00.487Z,1516716000.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:00.502Z,1516716000.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:00.868Z,1516716000.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:00.900Z,1516716000.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:01.267Z,1516716001.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:01.303Z,1516716001.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:01.668Z,1516716001.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:01.701Z,1516716001.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:02.069Z,1516716002.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:02.095Z,1516716002.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:02.468Z,1516716002.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:02.504Z,1516716002.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:02.885Z,1516716002.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:02.908Z,1516716002.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:03.296Z,1516716003.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:03.310Z,1516716003.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:03.692Z,1516716003.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:03.706Z,1516716003.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:04.066Z,1516716004.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:04.089Z,1516716004.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:04.468Z,1516716004.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:04.501Z,1516716004.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:04.869Z,1516716004.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:04.884Z,1516716004.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:05.268Z,1516716005.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:05.289Z,1516716005.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:05.687Z,1516716005.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:05.713Z,1516716005.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:06.087Z,1516716006.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:06.122Z,1516716006.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:06.487Z,1516716006.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:06.513Z,1516716006.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:06.880Z,1516716006.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:06.916Z,1516716006.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:07.272Z,1516716007.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:07.287Z,1516716007.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:07.680Z,1516716007.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:07.717Z,1516716007.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:08.078Z,1516716008.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:08.093Z,1516716008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:08.476Z,1516716008.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:08.490Z,1516716008.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:08.879Z,1516716008.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:08.894Z,1516716008.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:09.287Z,1516716009.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:09.302Z,1516716009.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:09.694Z,1516716009.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:09.730Z,1516716009.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:10.074Z,1516716010.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:10.089Z,1516716010.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:10.475Z,1516716010.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:10.490Z,1516716010.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:10.877Z,1516716010.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:10.896Z,1516716010.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:11.276Z,1516716011.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:11.291Z,1516716011.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:11.293Z,1516716011.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:11.294Z,1516716011.294 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 214 2018-01-23T14:00:11.294Z,1516716011.294 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:00:11.306Z,1516716011.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:00:11.681Z,1516716011.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:11.701Z,1516716011.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:11.729Z,1516716011.729 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:00:11.729Z,1516716011.729 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 214 2018-01-23T14:00:12.086Z,1516716012.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:12.101Z,1516716012.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:12.102Z,1516716012.102 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:00:12.103Z,1516716012.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:00:12.103Z,1516716012.103 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:00:12.486Z,1516716012.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:12.501Z,1516716012.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:12.876Z,1516716012.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:12.897Z,1516716012.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:13.276Z,1516716013.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:13.296Z,1516716013.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:13.680Z,1516716013.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:13.701Z,1516716013.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:14.075Z,1516716014.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:14.095Z,1516716014.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:14.478Z,1516716014.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:14.497Z,1516716014.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:14.887Z,1516716014.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:14.902Z,1516716014.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:15.290Z,1516716015.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:15.305Z,1516716015.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:15.687Z,1516716015.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:15.702Z,1516716015.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:16.076Z,1516716016.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:16.095Z,1516716016.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:16.472Z,1516716016.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:16.494Z,1516716016.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:16.878Z,1516716016.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:16.896Z,1516716016.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:17.266Z,1516716017.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:17.297Z,1516716017.297 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:17.298Z,1516716017.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 214 2018-01-23T14:00:17.298Z,1516716017.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:00:17.304Z,1516716017.304 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:17.304Z,1516716017.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 214 2018-01-23T14:00:17.304Z,1516716017.304 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:00:17.341Z,1516716017.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:00:17.341Z,1516716017.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:00:17.691Z,1516716017.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:17.717Z,1516716017.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:00:17.717Z,1516716017.717 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 214 2018-01-23T14:00:17.718Z,1516716017.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:00:17.718Z,1516716017.718 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 214 2018-01-23T14:00:18.092Z,1516716018.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:18.111Z,1516716018.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:00:18.112Z,1516716018.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:00:18.112Z,1516716018.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:00:18.112Z,1516716018.112 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:00:18.113Z,1516716018.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:00:18.113Z,1516716018.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:00:18.487Z,1516716018.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:18.502Z,1516716018.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:00:18.503Z,1516716018.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:18.869Z,1516716018.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:18.904Z,1516716018.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:00:18.905Z,1516716018.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:19.269Z,1516716019.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:19.305Z,1516716019.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:00:19.306Z,1516716019.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:22.455Z,1516716022.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:22.470Z,1516716022.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:00:22.471Z,1516716022.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:22.577Z,1516716022.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:22.620Z,1516716022.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T14:00:22.621Z,1516716022.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:22.955Z,1516716022.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:22.969Z,1516716022.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T14:00:22.970Z,1516716022.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:23.360Z,1516716023.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:23.374Z,1516716023.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T14:00:23.376Z,1516716023.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:23.755Z,1516716023.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:23.770Z,1516716023.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T14:00:23.771Z,1516716023.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:24.140Z,1516716024.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:24.179Z,1516716024.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T14:00:24.180Z,1516716024.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:24.550Z,1516716024.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:24.564Z,1516716024.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T14:00:24.565Z,1516716024.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:24.939Z,1516716024.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:24.962Z,1516716024.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T14:00:24.967Z,1516716024.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:25.353Z,1516716025.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:25.368Z,1516716025.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T14:00:25.369Z,1516716025.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:25.757Z,1516716025.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:25.772Z,1516716025.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T14:00:25.773Z,1516716025.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:26.159Z,1516716026.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:26.174Z,1516716026.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T14:00:26.175Z,1516716026.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:26.555Z,1516716026.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:26.574Z,1516716026.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T14:00:26.576Z,1516716026.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:26.934Z,1516716026.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:26.966Z,1516716026.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T14:00:26.971Z,1516716026.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:27.337Z,1516716027.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:27.364Z,1516716027.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T14:00:27.365Z,1516716027.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:27.736Z,1516716027.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:27.763Z,1516716027.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T14:00:27.764Z,1516716027.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:28.137Z,1516716028.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:28.172Z,1516716028.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T14:00:28.173Z,1516716028.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:28.540Z,1516716028.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:28.567Z,1516716028.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T14:00:28.568Z,1516716028.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:28.955Z,1516716028.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:28.974Z,1516716028.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T14:00:28.975Z,1516716028.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:29.361Z,1516716029.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:29.376Z,1516716029.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T14:00:29.377Z,1516716029.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:29.755Z,1516716029.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:29.774Z,1516716029.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T14:00:29.775Z,1516716029.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:30.136Z,1516716030.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:30.173Z,1516716030.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T14:00:30.174Z,1516716030.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:30.535Z,1516716030.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:30.572Z,1516716030.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T14:00:30.573Z,1516716030.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:30.937Z,1516716030.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:30.965Z,1516716030.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T14:00:30.966Z,1516716030.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:31.336Z,1516716031.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:31.353Z,1516716031.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T14:00:31.354Z,1516716031.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:31.748Z,1516716031.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:31.783Z,1516716031.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T14:00:31.784Z,1516716031.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:32.160Z,1516716032.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:32.186Z,1516716032.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T14:00:32.187Z,1516716032.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:32.560Z,1516716032.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:32.586Z,1516716032.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T14:00:32.587Z,1516716032.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:32.944Z,1516716032.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:32.959Z,1516716032.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T14:00:32.960Z,1516716032.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:33.345Z,1516716033.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:33.361Z,1516716033.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T14:00:33.361Z,1516716033.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:33.750Z,1516716033.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:33.768Z,1516716033.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T14:00:33.769Z,1516716033.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:34.149Z,1516716034.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:34.164Z,1516716034.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T14:00:34.165Z,1516716034.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:34.546Z,1516716034.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:34.561Z,1516716034.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T14:00:34.562Z,1516716034.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:34.950Z,1516716034.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:34.965Z,1516716034.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T14:00:34.966Z,1516716034.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:35.364Z,1516716035.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:35.399Z,1516716035.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T14:00:35.400Z,1516716035.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:35.754Z,1516716035.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:35.768Z,1516716035.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T14:00:35.769Z,1516716035.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:36.144Z,1516716036.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:36.160Z,1516716036.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T14:00:36.161Z,1516716036.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:36.546Z,1516716036.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:36.563Z,1516716036.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T14:00:36.564Z,1516716036.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:36.941Z,1516716036.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:36.968Z,1516716036.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T14:00:36.969Z,1516716036.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:37.341Z,1516716037.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:37.365Z,1516716037.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:37.752Z,1516716037.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:37.768Z,1516716037.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:38.152Z,1516716038.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:38.168Z,1516716038.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:38.551Z,1516716038.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:38.573Z,1516716038.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:38.946Z,1516716038.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:38.962Z,1516716038.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:39.341Z,1516716039.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:39.368Z,1516716039.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:39.744Z,1516716039.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:39.772Z,1516716039.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:40.138Z,1516716040.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:40.168Z,1516716040.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:40.537Z,1516716040.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:40.565Z,1516716040.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:40.952Z,1516716040.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:40.979Z,1516716040.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:41.362Z,1516716041.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:41.377Z,1516716041.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:41.758Z,1516716041.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:41.772Z,1516716041.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:42.136Z,1516716042.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:42.169Z,1516716042.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:42.540Z,1516716042.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:42.571Z,1516716042.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:42.937Z,1516716042.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:42.973Z,1516716042.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:43.340Z,1516716043.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:43.374Z,1516716043.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:43.748Z,1516716043.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:43.783Z,1516716043.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:44.151Z,1516716044.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:44.179Z,1516716044.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:44.556Z,1516716044.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:44.589Z,1516716044.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:44.937Z,1516716044.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:44.953Z,1516716044.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:45.340Z,1516716045.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:45.361Z,1516716045.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:45.745Z,1516716045.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:45.765Z,1516716045.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:46.145Z,1516716046.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:46.161Z,1516716046.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:46.541Z,1516716046.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:46.564Z,1516716046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:46.954Z,1516716046.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:46.970Z,1516716046.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:47.356Z,1516716047.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:47.374Z,1516716047.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:47.755Z,1516716047.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:47.770Z,1516716047.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:48.140Z,1516716048.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:48.171Z,1516716048.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:48.543Z,1516716048.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:48.566Z,1516716048.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:48.939Z,1516716048.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:48.973Z,1516716048.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:49.343Z,1516716049.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:49.374Z,1516716049.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:49.756Z,1516716049.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:49.772Z,1516716049.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:50.159Z,1516716050.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:50.174Z,1516716050.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:50.555Z,1516716050.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:50.570Z,1516716050.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:50.945Z,1516716050.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:50.969Z,1516716050.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:51.340Z,1516716051.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:51.373Z,1516716051.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:51.736Z,1516716051.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:51.769Z,1516716051.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:52.137Z,1516716052.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:52.173Z,1516716052.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:52.540Z,1516716052.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:52.573Z,1516716052.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:52.957Z,1516716052.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:52.977Z,1516716052.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:53.360Z,1516716053.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:53.374Z,1516716053.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:53.752Z,1516716053.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:53.783Z,1516716053.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:54.154Z,1516716054.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:54.169Z,1516716054.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:54.537Z,1516716054.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:54.572Z,1516716054.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:54.937Z,1516716054.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:54.965Z,1516716054.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:55.336Z,1516716055.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:55.369Z,1516716055.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:55.757Z,1516716055.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:55.772Z,1516716055.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:56.156Z,1516716056.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:56.178Z,1516716056.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:56.556Z,1516716056.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:56.577Z,1516716056.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:56.937Z,1516716056.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:56.972Z,1516716056.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:57.337Z,1516716057.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:57.369Z,1516716057.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:57.738Z,1516716057.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:57.769Z,1516716057.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:58.141Z,1516716058.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:58.173Z,1516716058.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:58.540Z,1516716058.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:58.573Z,1516716058.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:58.952Z,1516716058.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:58.978Z,1516716058.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:59.352Z,1516716059.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:59.383Z,1516716059.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:00:59.756Z,1516716059.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:00:59.781Z,1516716059.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:00.149Z,1516716060.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:00.183Z,1516716060.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:00.549Z,1516716060.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:00.580Z,1516716060.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:00.945Z,1516716060.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:00.961Z,1516716060.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:01.342Z,1516716061.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:01.365Z,1516716061.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:01.748Z,1516716061.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:01.764Z,1516716061.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:02.152Z,1516716062.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:02.167Z,1516716062.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:02.560Z,1516716062.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:02.591Z,1516716062.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:02.948Z,1516716062.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:02.973Z,1516716062.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:03.349Z,1516716063.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:03.377Z,1516716063.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:03.742Z,1516716063.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:03.777Z,1516716063.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:04.139Z,1516716064.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:04.179Z,1516716064.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:04.543Z,1516716064.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:04.582Z,1516716064.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:04.954Z,1516716064.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:04.994Z,1516716064.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:05.357Z,1516716065.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:05.393Z,1516716065.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:05.759Z,1516716065.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:05.778Z,1516716065.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:06.149Z,1516716066.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:06.169Z,1516716066.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:06.545Z,1516716066.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:06.565Z,1516716066.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:06.945Z,1516716066.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:06.961Z,1516716066.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:07.349Z,1516716067.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:07.394Z,1516716067.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:07.772Z,1516716067.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:07.805Z,1516716067.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:08.159Z,1516716068.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:08.174Z,1516716068.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:08.573Z,1516716068.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:08.622Z,1516716068.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:08.938Z,1516716068.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:08.983Z,1516716068.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:09.342Z,1516716069.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:09.385Z,1516716069.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:09.758Z,1516716069.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:09.796Z,1516716069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:10.156Z,1516716070.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:10.200Z,1516716070.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:10.548Z,1516716070.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:10.591Z,1516716070.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:10.970Z,1516716070.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:11.007Z,1516716071.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:11.358Z,1516716071.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:11.393Z,1516716071.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:11.754Z,1516716071.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:11.777Z,1516716071.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:12.138Z,1516716072.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:12.181Z,1516716072.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:12.554Z,1516716072.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:12.578Z,1516716072.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:12.944Z,1516716072.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:12.981Z,1516716072.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:13.343Z,1516716073.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:13.396Z,1516716073.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:13.754Z,1516716073.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:13.798Z,1516716073.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:14.159Z,1516716074.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:14.197Z,1516716074.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:14.559Z,1516716074.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:14.590Z,1516716074.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:14.949Z,1516716074.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:14.976Z,1516716074.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:15.348Z,1516716075.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:15.369Z,1516716075.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:15.750Z,1516716075.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:15.773Z,1516716075.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:16.150Z,1516716076.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:16.174Z,1516716076.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:16.542Z,1516716076.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:16.582Z,1516716076.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:16.953Z,1516716076.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:16.973Z,1516716076.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:17.353Z,1516716077.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:17.369Z,1516716077.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:17.750Z,1516716077.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:17.770Z,1516716077.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:18.143Z,1516716078.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:18.172Z,1516716078.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:18.181Z,1516716078.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T13:56:17.8Z 2018-01-23T14:01:18.182Z,1516716078.182 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:01:18.182Z,1516716078.182 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:01:18.538Z,1516716078.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:18.567Z,1516716078.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:21.588Z,1516716081.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:21.603Z,1516716081.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:21.877Z,1516716081.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:21.893Z,1516716081.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:25.268Z,1516716085.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:25.306Z,1516716085.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:25.359Z,1516716085.359 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0252.lzma 2018-01-23T14:01:25.397Z,1516716085.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:25.444Z,1516716085.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:25.764Z,1516716085.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:25.779Z,1516716085.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:26.130Z,1516716086.130 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0252.lzma.bak 2018-01-23T14:01:26.130Z,1516716086.130 [DataOverHttps](INFO): SBD MOMSN=7755677 2018-01-23T14:01:26.160Z,1516716086.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:26.187Z,1516716086.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:26.797Z,1516716086.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:26.824Z,1516716086.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:26.950Z,1516716086.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:26.985Z,1516716086.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:30.173Z,1516716090.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:30.189Z,1516716090.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:30.301Z,1516716090.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:30.341Z,1516716090.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:30.684Z,1516716090.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:30.724Z,1516716090.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:31.080Z,1516716091.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:31.100Z,1516716091.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:31.470Z,1516716091.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:31.490Z,1516716091.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:31.875Z,1516716091.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:31.889Z,1516716091.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:34.969Z,1516716094.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:34.984Z,1516716094.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:35.063Z,1516716095.063 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0253.lzma 2018-01-23T14:01:35.084Z,1516716095.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:35.132Z,1516716095.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:35.447Z,1516716095.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:35.471Z,1516716095.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:35.812Z,1516716095.812 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0253.lzma.bak 2018-01-23T14:01:35.813Z,1516716095.813 [DataOverHttps](INFO): SBD MOMSN=7755679 2018-01-23T14:01:35.847Z,1516716095.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:35.893Z,1516716095.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:36.491Z,1516716096.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:36.523Z,1516716096.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:36.526Z,1516716096.526 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:01:36.526Z,1516716096.526 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:01:36.526Z,1516716096.526 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:01:36.633Z,1516716096.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:36.672Z,1516716096.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:39.734Z,1516716099.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:39.750Z,1516716099.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:39.850Z,1516716099.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:39.893Z,1516716099.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:40.243Z,1516716100.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:40.277Z,1516716100.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:40.648Z,1516716100.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:40.680Z,1516716100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:41.039Z,1516716101.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:41.054Z,1516716101.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:41.433Z,1516716101.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:41.490Z,1516716101.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:41.832Z,1516716101.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:41.846Z,1516716101.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:42.230Z,1516716102.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:42.245Z,1516716102.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:42.629Z,1516716102.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:42.648Z,1516716102.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:43.035Z,1516716103.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:43.050Z,1516716103.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:43.439Z,1516716103.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:43.454Z,1516716103.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:43.835Z,1516716103.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:43.850Z,1516716103.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:44.232Z,1516716104.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:44.246Z,1516716104.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:44.631Z,1516716104.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:44.646Z,1516716104.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:45.030Z,1516716105.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:45.057Z,1516716105.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:45.433Z,1516716105.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:45.448Z,1516716105.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:45.838Z,1516716105.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:45.857Z,1516716105.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:46.243Z,1516716106.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:46.258Z,1516716106.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:46.638Z,1516716106.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:46.654Z,1516716106.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:47.028Z,1516716107.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:47.048Z,1516716107.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:47.432Z,1516716107.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:47.447Z,1516716107.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:47.834Z,1516716107.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:47.849Z,1516716107.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:48.232Z,1516716108.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:48.251Z,1516716108.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:48.632Z,1516716108.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:48.647Z,1516716108.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:49.038Z,1516716109.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:49.061Z,1516716109.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:49.443Z,1516716109.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:49.458Z,1516716109.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:49.837Z,1516716109.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:49.857Z,1516716109.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:50.237Z,1516716110.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:50.252Z,1516716110.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:50.628Z,1516716110.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:50.648Z,1516716110.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:51.028Z,1516716111.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:51.061Z,1516716111.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:51.437Z,1516716111.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:51.452Z,1516716111.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:51.842Z,1516716111.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:51.861Z,1516716111.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:52.243Z,1516716112.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:52.258Z,1516716112.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:52.643Z,1516716112.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:52.664Z,1516716112.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:53.030Z,1516716113.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:53.045Z,1516716113.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:53.428Z,1516716113.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:53.450Z,1516716113.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:53.824Z,1516716113.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:53.853Z,1516716113.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:54.237Z,1516716114.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:54.252Z,1516716114.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:54.624Z,1516716114.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:54.659Z,1516716114.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:55.044Z,1516716115.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:55.059Z,1516716115.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:55.446Z,1516716115.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:55.469Z,1516716115.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:55.848Z,1516716115.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:55.862Z,1516716115.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:56.224Z,1516716116.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:56.259Z,1516716116.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:56.623Z,1516716116.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:56.657Z,1516716116.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:57.029Z,1516716117.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:57.061Z,1516716117.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:57.425Z,1516716117.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:57.458Z,1516716117.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:57.845Z,1516716117.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:57.860Z,1516716117.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:58.248Z,1516716118.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:58.263Z,1516716118.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:58.645Z,1516716118.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:58.660Z,1516716118.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:59.024Z,1516716119.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:59.061Z,1516716119.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:59.433Z,1516716119.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:59.460Z,1516716119.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:01:59.828Z,1516716119.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:01:59.858Z,1516716119.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:00.229Z,1516716120.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:00.257Z,1516716120.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:00.625Z,1516716120.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:00.653Z,1516716120.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:01.035Z,1516716121.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:01.069Z,1516716121.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:01.484Z,1516716121.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:01.520Z,1516716121.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:01.843Z,1516716121.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:01.869Z,1516716121.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:02.237Z,1516716122.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:02.269Z,1516716122.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:02.631Z,1516716122.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:02.654Z,1516716122.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:03.032Z,1516716123.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:03.052Z,1516716123.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:03.442Z,1516716123.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:03.457Z,1516716123.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:03.838Z,1516716123.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:03.861Z,1516716123.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:04.307Z,1516716124.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:04.338Z,1516716124.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:04.644Z,1516716124.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:04.659Z,1516716124.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:05.033Z,1516716125.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:05.049Z,1516716125.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:05.434Z,1516716125.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:05.449Z,1516716125.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:05.834Z,1516716125.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:05.849Z,1516716125.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:06.234Z,1516716126.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:06.249Z,1516716126.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:06.640Z,1516716126.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:06.655Z,1516716126.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:07.043Z,1516716127.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:07.058Z,1516716127.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:07.442Z,1516716127.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:07.461Z,1516716127.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:07.844Z,1516716127.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:07.865Z,1516716127.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:08.224Z,1516716128.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:08.253Z,1516716128.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:08.622Z,1516716128.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:08.658Z,1516716128.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:09.025Z,1516716129.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:09.057Z,1516716129.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:09.424Z,1516716129.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:09.460Z,1516716129.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:09.843Z,1516716129.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:09.858Z,1516716129.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:10.246Z,1516716130.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:10.261Z,1516716130.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:10.644Z,1516716130.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:10.659Z,1516716130.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:11.022Z,1516716131.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:11.053Z,1516716131.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:11.424Z,1516716131.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:11.456Z,1516716131.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:11.823Z,1516716131.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:11.862Z,1516716131.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:12.223Z,1516716132.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:12.246Z,1516716132.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:12.624Z,1516716132.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:12.660Z,1516716132.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:13.035Z,1516716133.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:13.071Z,1516716133.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:13.451Z,1516716133.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:13.466Z,1516716133.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:13.835Z,1516716133.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:13.869Z,1516716133.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:14.224Z,1516716134.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:14.263Z,1516716134.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:14.624Z,1516716134.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:14.661Z,1516716134.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:15.029Z,1516716135.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:15.044Z,1516716135.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:15.432Z,1516716135.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:15.447Z,1516716135.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:15.843Z,1516716135.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:15.869Z,1516716135.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:16.260Z,1516716136.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:16.275Z,1516716136.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:16.647Z,1516716136.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:16.680Z,1516716136.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:17.026Z,1516716137.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:17.041Z,1516716137.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:17.429Z,1516716137.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:17.444Z,1516716137.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:17.871Z,1516716137.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:17.886Z,1516716137.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:18.229Z,1516716138.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:18.245Z,1516716138.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:18.632Z,1516716138.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:18.653Z,1516716138.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:19.047Z,1516716139.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:19.080Z,1516716139.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:19.435Z,1516716139.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:19.450Z,1516716139.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:19.839Z,1516716139.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:19.854Z,1516716139.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:20.233Z,1516716140.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:20.248Z,1516716140.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:20.631Z,1516716140.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:20.646Z,1516716140.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:21.030Z,1516716141.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:21.049Z,1516716141.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:21.433Z,1516716141.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:21.448Z,1516716141.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:21.838Z,1516716141.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:21.857Z,1516716141.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:22.239Z,1516716142.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:22.254Z,1516716142.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:22.638Z,1516716142.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:22.653Z,1516716142.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:23.028Z,1516716143.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:23.048Z,1516716143.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:23.432Z,1516716143.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:23.447Z,1516716143.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:23.833Z,1516716143.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:23.852Z,1516716143.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:24.240Z,1516716144.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:24.254Z,1516716144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:24.632Z,1516716144.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:24.647Z,1516716144.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:25.038Z,1516716145.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:25.060Z,1516716145.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:25.443Z,1516716145.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:25.458Z,1516716145.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:25.851Z,1516716145.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:25.882Z,1516716145.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:26.233Z,1516716146.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:26.249Z,1516716146.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:26.629Z,1516716146.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:26.652Z,1516716146.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:27.032Z,1516716147.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:27.051Z,1516716147.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:27.428Z,1516716147.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:27.469Z,1516716147.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:27.847Z,1516716147.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:27.862Z,1516716147.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:28.246Z,1516716148.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:28.261Z,1516716148.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:28.644Z,1516716148.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:28.659Z,1516716148.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:29.024Z,1516716149.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:29.050Z,1516716149.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:29.423Z,1516716149.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:29.457Z,1516716149.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:29.825Z,1516716149.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:29.861Z,1516716149.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:30.237Z,1516716150.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:30.252Z,1516716150.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:30.623Z,1516716150.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:30.660Z,1516716150.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:31.044Z,1516716151.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:31.059Z,1516716151.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:31.450Z,1516716151.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:31.469Z,1516716151.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:31.842Z,1516716151.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:31.865Z,1516716151.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:32.225Z,1516716152.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:32.263Z,1516716152.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:32.622Z,1516716152.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:32.657Z,1516716152.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:33.025Z,1516716153.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:33.057Z,1516716153.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:33.425Z,1516716153.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:33.462Z,1516716153.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:33.843Z,1516716153.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:33.858Z,1516716153.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:34.246Z,1516716154.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:34.261Z,1516716154.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:34.644Z,1516716154.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:34.665Z,1516716154.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:35.024Z,1516716155.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:35.057Z,1516716155.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:35.441Z,1516716155.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:35.461Z,1516716155.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:35.842Z,1516716155.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:35.857Z,1516716155.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:36.226Z,1516716156.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:36.261Z,1516716156.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:36.625Z,1516716156.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:36.657Z,1516716156.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:37.039Z,1516716157.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:37.076Z,1516716157.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:40.128Z,1516716160.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:40.155Z,1516716160.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:40.268Z,1516716160.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:40.306Z,1516716160.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:40.607Z,1516716160.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:40.629Z,1516716160.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:41.014Z,1516716161.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:41.029Z,1516716161.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:41.408Z,1516716161.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:41.424Z,1516716161.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:41.808Z,1516716161.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:41.837Z,1516716161.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:42.220Z,1516716162.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:42.234Z,1516716162.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:42.616Z,1516716162.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:42.632Z,1516716162.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:43.013Z,1516716163.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:43.033Z,1516716163.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:43.414Z,1516716163.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:43.429Z,1516716163.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:43.816Z,1516716163.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:43.832Z,1516716163.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:44.220Z,1516716164.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:44.235Z,1516716164.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:44.620Z,1516716164.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:44.634Z,1516716164.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:45.007Z,1516716165.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:45.022Z,1516716165.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:45.404Z,1516716165.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:45.423Z,1516716165.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:45.816Z,1516716165.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:45.832Z,1516716165.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:46.219Z,1516716166.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:46.234Z,1516716166.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:46.614Z,1516716166.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:46.629Z,1516716166.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:47.006Z,1516716167.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:47.021Z,1516716167.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:47.400Z,1516716167.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:47.423Z,1516716167.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:47.819Z,1516716167.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:47.834Z,1516716167.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:48.219Z,1516716168.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:48.233Z,1516716168.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:48.615Z,1516716168.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:48.630Z,1516716168.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:49.001Z,1516716169.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:49.023Z,1516716169.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:49.406Z,1516716169.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:49.424Z,1516716169.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:49.818Z,1516716169.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:49.837Z,1516716169.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:50.219Z,1516716170.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:50.234Z,1516716170.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:50.615Z,1516716170.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:50.636Z,1516716170.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:51.007Z,1516716171.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:51.022Z,1516716171.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:51.404Z,1516716171.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:51.430Z,1516716171.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:51.823Z,1516716171.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:51.838Z,1516716171.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:52.212Z,1516716172.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:52.239Z,1516716172.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:52.622Z,1516716172.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:52.637Z,1516716172.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:52.997Z,1516716172.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:53.025Z,1516716173.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:53.400Z,1516716173.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:53.426Z,1516716173.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:53.819Z,1516716173.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:53.834Z,1516716173.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:54.226Z,1516716174.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:54.241Z,1516716174.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:54.616Z,1516716174.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:54.631Z,1516716174.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:54.997Z,1516716174.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:55.029Z,1516716175.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:55.397Z,1516716175.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:55.432Z,1516716175.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:55.823Z,1516716175.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:55.845Z,1516716175.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:56.218Z,1516716176.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:56.241Z,1516716176.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:56.615Z,1516716176.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:56.630Z,1516716176.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:56.998Z,1516716176.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:57.024Z,1516716177.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:57.415Z,1516716177.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:57.430Z,1516716177.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:57.817Z,1516716177.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:57.838Z,1516716177.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:58.212Z,1516716178.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:58.242Z,1516716178.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:58.615Z,1516716178.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:58.630Z,1516716178.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:59.018Z,1516716179.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:59.033Z,1516716179.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:59.413Z,1516716179.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:59.428Z,1516716179.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:02:59.812Z,1516716179.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:02:59.833Z,1516716179.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:00.220Z,1516716180.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:00.235Z,1516716180.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:00.620Z,1516716180.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:00.635Z,1516716180.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:01.017Z,1516716181.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:01.032Z,1516716181.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:01.398Z,1516716181.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:01.433Z,1516716181.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:01.819Z,1516716181.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:01.834Z,1516716181.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:02.219Z,1516716182.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:02.234Z,1516716182.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:02.627Z,1516716182.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:02.642Z,1516716182.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:02.995Z,1516716182.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:03.018Z,1516716183.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:03.405Z,1516716183.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:03.431Z,1516716183.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:03.800Z,1516716183.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:03.827Z,1516716183.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:04.212Z,1516716184.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:04.245Z,1516716184.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:04.631Z,1516716184.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:04.646Z,1516716184.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:05.007Z,1516716185.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:05.041Z,1516716185.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:05.407Z,1516716185.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:05.422Z,1516716185.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:05.808Z,1516716185.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:05.823Z,1516716185.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:06.207Z,1516716186.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:06.222Z,1516716186.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:06.604Z,1516716186.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:06.619Z,1516716186.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:07.019Z,1516716187.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:07.034Z,1516716187.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:07.415Z,1516716187.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:07.431Z,1516716187.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:07.812Z,1516716187.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:07.833Z,1516716187.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:08.210Z,1516716188.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:08.225Z,1516716188.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:08.604Z,1516716188.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:08.629Z,1516716188.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:09.001Z,1516716189.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:09.023Z,1516716189.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:09.413Z,1516716189.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:09.433Z,1516716189.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:09.814Z,1516716189.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:09.829Z,1516716189.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:10.218Z,1516716190.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:10.233Z,1516716190.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:10.615Z,1516716190.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:10.631Z,1516716190.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:11.016Z,1516716191.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:11.031Z,1516716191.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:11.408Z,1516716191.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:11.427Z,1516716191.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:11.806Z,1516716191.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:11.826Z,1516716191.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:12.202Z,1516716192.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:12.230Z,1516716192.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:12.236Z,1516716192.236 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:12.236Z,1516716192.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 215 2018-01-23T14:03:12.236Z,1516716192.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:03:12.260Z,1516716192.260 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:03:12.601Z,1516716192.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:12.628Z,1516716192.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:12.653Z,1516716192.653 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:03:12.653Z,1516716192.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 215 2018-01-23T14:03:13.024Z,1516716193.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:13.045Z,1516716193.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:13.046Z,1516716193.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:03:13.046Z,1516716193.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:03:13.047Z,1516716193.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:03:13.417Z,1516716193.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:13.453Z,1516716193.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:13.813Z,1516716193.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:13.839Z,1516716193.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:14.199Z,1516716194.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:14.237Z,1516716194.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:14.609Z,1516716194.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:14.645Z,1516716194.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:14.997Z,1516716194.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:15.036Z,1516716195.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:15.399Z,1516716195.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:15.407Z,1516716195.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x53106 got:0x51008 2018-01-23T14:03:15.444Z,1516716195.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:15.803Z,1516716195.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:15.834Z,1516716195.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:16.215Z,1516716196.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:16.249Z,1516716196.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:16.614Z,1516716196.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:16.641Z,1516716196.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:17.033Z,1516716197.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:17.048Z,1516716197.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:17.407Z,1516716197.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:17.438Z,1516716197.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:17.813Z,1516716197.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:17.836Z,1516716197.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:18.205Z,1516716198.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:18.223Z,1516716198.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:18.223Z,1516716198.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 215 2018-01-23T14:03:18.223Z,1516716198.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:03:18.225Z,1516716198.225 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:18.225Z,1516716198.225 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 215 2018-01-23T14:03:18.225Z,1516716198.225 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:03:18.271Z,1516716198.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:03:18.271Z,1516716198.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:03:18.605Z,1516716198.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:18.657Z,1516716198.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:03:18.657Z,1516716198.657 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 215 2018-01-23T14:03:18.657Z,1516716198.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:03:18.657Z,1516716198.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 215 2018-01-23T14:03:19.011Z,1516716199.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:19.033Z,1516716199.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:03:19.033Z,1516716199.033 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:03:19.034Z,1516716199.034 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:03:19.034Z,1516716199.034 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:03:19.039Z,1516716199.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:03:19.039Z,1516716199.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:03:19.413Z,1516716199.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:19.427Z,1516716199.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:03:19.428Z,1516716199.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:19.813Z,1516716199.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:19.829Z,1516716199.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:03:19.830Z,1516716199.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:20.207Z,1516716200.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:20.229Z,1516716200.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:03:20.229Z,1516716200.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:20.610Z,1516716200.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:20.625Z,1516716200.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:03:20.626Z,1516716200.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:21.003Z,1516716201.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:21.029Z,1516716201.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:03:21.030Z,1516716201.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:21.410Z,1516716201.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:21.429Z,1516716201.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:03:21.430Z,1516716201.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:21.808Z,1516716201.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:21.824Z,1516716201.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:03:21.825Z,1516716201.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:22.217Z,1516716202.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:22.233Z,1516716202.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:03:22.234Z,1516716202.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:22.619Z,1516716202.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:22.636Z,1516716202.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:03:22.637Z,1516716202.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:23.017Z,1516716203.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:23.034Z,1516716203.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:03:23.035Z,1516716203.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:23.400Z,1516716203.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:23.437Z,1516716203.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:03:23.438Z,1516716203.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:23.812Z,1516716203.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:23.819Z,1516716203.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x13948 got:0x16839 2018-01-23T14:03:23.846Z,1516716203.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:03:23.863Z,1516716203.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:24.208Z,1516716204.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:24.227Z,1516716204.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:03:24.228Z,1516716204.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:24.596Z,1516716204.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:24.629Z,1516716204.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:03:24.630Z,1516716204.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:25.018Z,1516716205.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:25.033Z,1516716205.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:03:25.034Z,1516716205.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:25.421Z,1516716205.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:25.436Z,1516716205.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:03:25.437Z,1516716205.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:25.812Z,1516716205.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:25.833Z,1516716205.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:03:25.834Z,1516716205.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:26.196Z,1516716206.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:26.236Z,1516716206.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:03:26.237Z,1516716206.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:26.612Z,1516716206.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:26.628Z,1516716206.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:03:26.629Z,1516716206.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:27.012Z,1516716207.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:27.026Z,1516716207.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:03:27.027Z,1516716207.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:27.407Z,1516716207.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:27.430Z,1516716207.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:03:27.435Z,1516716207.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:27.796Z,1516716207.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:27.833Z,1516716207.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:03:27.834Z,1516716207.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:28.218Z,1516716208.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:28.233Z,1516716208.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:03:28.234Z,1516716208.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:28.616Z,1516716208.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:28.643Z,1516716208.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:03:28.644Z,1516716208.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:29.008Z,1516716209.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:29.035Z,1516716209.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:03:29.036Z,1516716209.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:29.396Z,1516716209.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:29.436Z,1516716209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:03:29.437Z,1516716209.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:29.796Z,1516716209.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:29.836Z,1516716209.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:03:29.837Z,1516716209.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:30.197Z,1516716210.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:30.234Z,1516716210.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:03:30.235Z,1516716210.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:30.598Z,1516716210.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:30.630Z,1516716210.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:03:30.631Z,1516716210.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:31.007Z,1516716211.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:31.038Z,1516716211.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:03:31.039Z,1516716211.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:31.411Z,1516716211.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:31.450Z,1516716211.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:03:31.451Z,1516716211.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:31.809Z,1516716211.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:31.836Z,1516716211.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:03:31.837Z,1516716211.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:32.206Z,1516716212.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:32.235Z,1516716212.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:03:32.236Z,1516716212.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:32.596Z,1516716212.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:32.640Z,1516716212.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:03:32.641Z,1516716212.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:32.997Z,1516716212.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:33.033Z,1516716213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:03:33.033Z,1516716213.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:33.397Z,1516716213.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:33.416Z,1516716213.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:03:33.417Z,1516716213.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:33.804Z,1516716213.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:33.819Z,1516716213.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:03:33.820Z,1516716213.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:34.215Z,1516716214.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:34.252Z,1516716214.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:03:34.253Z,1516716214.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:34.625Z,1516716214.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:34.656Z,1516716214.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:03:34.657Z,1516716214.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:35.021Z,1516716215.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:35.048Z,1516716215.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:03:35.049Z,1516716215.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:35.405Z,1516716215.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:35.421Z,1516716215.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:03:35.422Z,1516716215.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:35.800Z,1516716215.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:35.834Z,1516716215.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:03:35.850Z,1516716215.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:36.205Z,1516716216.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:36.220Z,1516716216.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:03:36.221Z,1516716216.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:36.602Z,1516716216.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:36.631Z,1516716216.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:03:36.632Z,1516716216.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:37.013Z,1516716217.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:37.032Z,1516716217.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:03:37.033Z,1516716217.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:37.415Z,1516716217.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:37.459Z,1516716217.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:03:37.460Z,1516716217.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:40.508Z,1516716220.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:40.523Z,1516716220.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:40.624Z,1516716220.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:40.665Z,1516716220.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:40.973Z,1516716220.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:40.988Z,1516716220.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:41.374Z,1516716221.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:41.397Z,1516716221.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:41.769Z,1516716221.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:41.791Z,1516716221.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:42.182Z,1516716222.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:42.208Z,1516716222.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:42.587Z,1516716222.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:42.602Z,1516716222.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:42.982Z,1516716222.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:42.997Z,1516716222.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:43.369Z,1516716223.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:43.392Z,1516716223.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:43.778Z,1516716223.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:43.793Z,1516716223.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:44.176Z,1516716224.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:44.195Z,1516716224.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:44.577Z,1516716224.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:44.597Z,1516716224.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:44.952Z,1516716224.952 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:03:44.952Z,1516716224.952 [NAL9602] Data Fault, FailCount= 4 2018-01-23T14:03:44.952Z,1516716224.952 [NAL9602](ERROR): Data Fault 2018-01-23T14:03:44.978Z,1516716224.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:45.006Z,1516716225.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:45.049Z,1516716225.049 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:03:45.348Z,1516716225.348 [NAL9602](INFO): Powering down 2018-01-23T14:03:45.366Z,1516716225.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:45.407Z,1516716225.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:45.765Z,1516716225.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:45.796Z,1516716225.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:46.165Z,1516716226.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:46.201Z,1516716226.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:46.231Z,1516716226.231 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:03:46.231Z,1516716226.231 [NAL9602] No Fault, FailCount= 4 2018-01-23T14:03:46.564Z,1516716226.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:46.591Z,1516716226.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:46.964Z,1516716226.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:46.999Z,1516716226.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:47.381Z,1516716227.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:47.396Z,1516716227.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:47.768Z,1516716227.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:47.805Z,1516716227.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:48.169Z,1516716228.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:48.195Z,1516716228.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:48.565Z,1516716228.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:48.601Z,1516716228.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:48.965Z,1516716228.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:48.996Z,1516716228.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:49.364Z,1516716229.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:49.379Z,1516716229.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:49.773Z,1516716229.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:49.810Z,1516716229.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:50.165Z,1516716230.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:50.180Z,1516716230.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:50.576Z,1516716230.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:50.612Z,1516716230.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:50.968Z,1516716230.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:50.989Z,1516716230.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:51.371Z,1516716231.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:51.386Z,1516716231.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:51.771Z,1516716231.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:51.793Z,1516716231.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:52.171Z,1516716232.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:52.186Z,1516716232.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:52.571Z,1516716232.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:52.586Z,1516716232.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:52.980Z,1516716232.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:52.994Z,1516716232.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:53.369Z,1516716233.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:53.392Z,1516716233.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:53.774Z,1516716233.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:53.789Z,1516716233.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:54.176Z,1516716234.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:54.190Z,1516716234.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:54.574Z,1516716234.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:54.590Z,1516716234.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:54.973Z,1516716234.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:54.989Z,1516716234.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:55.375Z,1516716235.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:55.396Z,1516716235.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:55.773Z,1516716235.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:55.790Z,1516716235.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:56.176Z,1516716236.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:56.192Z,1516716236.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:56.573Z,1516716236.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:56.588Z,1516716236.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:56.970Z,1516716236.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:56.986Z,1516716236.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:57.375Z,1516716237.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:57.391Z,1516716237.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:57.775Z,1516716237.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:57.791Z,1516716237.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:58.173Z,1516716238.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:58.188Z,1516716238.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:58.575Z,1516716238.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:58.590Z,1516716238.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:58.976Z,1516716238.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:58.991Z,1516716238.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:59.364Z,1516716239.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:59.400Z,1516716239.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:03:59.780Z,1516716239.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:03:59.795Z,1516716239.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:00.165Z,1516716240.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:00.199Z,1516716240.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:00.564Z,1516716240.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:00.591Z,1516716240.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:00.963Z,1516716240.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:00.997Z,1516716240.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:01.364Z,1516716241.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:01.390Z,1516716241.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:01.764Z,1516716241.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:01.792Z,1516716241.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:02.164Z,1516716242.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:02.191Z,1516716242.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:02.564Z,1516716242.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:02.599Z,1516716242.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:02.962Z,1516716242.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:02.997Z,1516716242.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:03.364Z,1516716243.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:03.391Z,1516716243.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:03.776Z,1516716243.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:03.791Z,1516716243.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:04.162Z,1516716244.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:04.197Z,1516716244.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:04.564Z,1516716244.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:04.591Z,1516716244.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:04.987Z,1516716244.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:05.002Z,1516716245.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:05.364Z,1516716245.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:05.391Z,1516716245.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:05.764Z,1516716245.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:05.801Z,1516716245.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:06.163Z,1516716246.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:06.189Z,1516716246.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:06.564Z,1516716246.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:06.591Z,1516716246.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:06.964Z,1516716246.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:06.991Z,1516716246.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:07.376Z,1516716247.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:07.391Z,1516716247.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:07.764Z,1516716247.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:07.791Z,1516716247.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:08.164Z,1516716248.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:08.195Z,1516716248.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:08.564Z,1516716248.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:08.590Z,1516716248.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:08.962Z,1516716248.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:08.997Z,1516716248.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:09.363Z,1516716249.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:09.390Z,1516716249.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:09.780Z,1516716249.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:09.795Z,1516716249.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:10.162Z,1516716250.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:10.197Z,1516716250.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:10.565Z,1516716250.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:10.591Z,1516716250.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:10.968Z,1516716250.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:11.001Z,1516716251.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:11.364Z,1516716251.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:11.391Z,1516716251.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:11.763Z,1516716251.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:11.791Z,1516716251.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:12.164Z,1516716252.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:12.197Z,1516716252.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:12.564Z,1516716252.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:12.599Z,1516716252.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:12.964Z,1516716252.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:12.996Z,1516716252.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:13.364Z,1516716253.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:13.403Z,1516716253.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:13.764Z,1516716253.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:13.809Z,1516716253.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:14.164Z,1516716254.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:14.179Z,1516716254.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:14.563Z,1516716254.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:14.584Z,1516716254.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:14.965Z,1516716254.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:14.979Z,1516716254.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:15.360Z,1516716255.360 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:04:15.377Z,1516716255.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:15.409Z,1516716255.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:15.776Z,1516716255.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:15.790Z,1516716255.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:16.169Z,1516716256.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:16.184Z,1516716256.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:16.576Z,1516716256.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:16.591Z,1516716256.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:16.970Z,1516716256.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:16.985Z,1516716256.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:17.370Z,1516716257.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:17.388Z,1516716257.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:17.770Z,1516716257.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:17.785Z,1516716257.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:18.170Z,1516716258.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:18.184Z,1516716258.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:18.570Z,1516716258.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:18.593Z,1516716258.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:18.970Z,1516716258.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:18.985Z,1516716258.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:19.376Z,1516716259.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:19.396Z,1516716259.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:19.770Z,1516716259.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:19.784Z,1516716259.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:20.170Z,1516716260.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:20.185Z,1516716260.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:20.570Z,1516716260.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:20.592Z,1516716260.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:20.969Z,1516716260.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:20.984Z,1516716260.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:21.370Z,1516716261.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:21.385Z,1516716261.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:21.774Z,1516716261.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:21.793Z,1516716261.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:22.169Z,1516716262.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:22.184Z,1516716262.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:22.571Z,1516716262.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:22.586Z,1516716262.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:22.970Z,1516716262.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:22.985Z,1516716262.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:23.370Z,1516716263.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:23.392Z,1516716263.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:23.770Z,1516716263.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:23.790Z,1516716263.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:24.169Z,1516716264.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:24.191Z,1516716264.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:24.573Z,1516716264.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:24.587Z,1516716264.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:24.973Z,1516716264.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:24.988Z,1516716264.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:25.369Z,1516716265.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:25.396Z,1516716265.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:25.773Z,1516716265.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:25.788Z,1516716265.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:26.187Z,1516716266.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:26.202Z,1516716266.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:26.549Z,1516716266.549 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:04:26.575Z,1516716266.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:26.602Z,1516716266.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:26.965Z,1516716266.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:26.994Z,1516716266.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:27.391Z,1516716267.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:27.406Z,1516716267.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:27.788Z,1516716267.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:27.803Z,1516716267.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:28.187Z,1516716268.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:28.212Z,1516716268.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:28.565Z,1516716268.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:28.605Z,1516716268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:28.965Z,1516716268.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:29.002Z,1516716269.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:29.373Z,1516716269.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:29.402Z,1516716269.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:29.765Z,1516716269.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:29.801Z,1516716269.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:30.188Z,1516716270.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:30.207Z,1516716270.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:30.592Z,1516716270.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:30.617Z,1516716270.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:30.638Z,1516716270.638 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:04:30.993Z,1516716270.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:31.013Z,1516716271.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:31.366Z,1516716271.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:31.397Z,1516716271.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:31.766Z,1516716271.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:31.780Z,1516716271.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:32.166Z,1516716272.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:32.181Z,1516716272.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:32.574Z,1516716272.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:32.589Z,1516716272.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:32.979Z,1516716272.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:32.994Z,1516716272.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:33.380Z,1516716273.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:33.395Z,1516716273.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:33.781Z,1516716273.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:33.801Z,1516716273.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:34.181Z,1516716274.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:34.195Z,1516716274.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:34.574Z,1516716274.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:34.590Z,1516716274.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:34.972Z,1516716274.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:35.001Z,1516716275.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:35.375Z,1516716275.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:35.390Z,1516716275.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:35.769Z,1516716275.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:35.792Z,1516716275.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:36.182Z,1516716276.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:36.205Z,1516716276.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:36.583Z,1516716276.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:36.598Z,1516716276.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:36.982Z,1516716276.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:36.998Z,1516716276.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:37.369Z,1516716277.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:37.392Z,1516716277.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:37.774Z,1516716277.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:37.789Z,1516716277.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:40.888Z,1516716280.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:40.903Z,1516716280.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:41.005Z,1516716281.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:41.034Z,1516716281.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:41.387Z,1516716281.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:41.402Z,1516716281.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:41.787Z,1516716281.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:41.802Z,1516716281.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:42.187Z,1516716282.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:42.201Z,1516716282.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:42.572Z,1516716282.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:42.592Z,1516716282.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:42.977Z,1516716282.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:42.992Z,1516716282.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:43.374Z,1516716283.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:43.389Z,1516716283.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:43.776Z,1516716283.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:43.797Z,1516716283.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:44.187Z,1516716284.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:44.202Z,1516716284.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:44.586Z,1516716284.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:44.601Z,1516716284.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:44.987Z,1516716284.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:45.002Z,1516716285.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:45.374Z,1516716285.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:45.389Z,1516716285.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:45.773Z,1516716285.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:45.789Z,1516716285.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:46.169Z,1516716286.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:46.192Z,1516716286.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:46.578Z,1516716286.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:46.593Z,1516716286.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:46.973Z,1516716286.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:46.989Z,1516716286.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:47.386Z,1516716287.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:47.401Z,1516716287.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:47.787Z,1516716287.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:47.801Z,1516716287.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:48.187Z,1516716288.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:48.202Z,1516716288.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:48.572Z,1516716288.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:48.592Z,1516716288.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:48.978Z,1516716288.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:48.992Z,1516716288.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:49.376Z,1516716289.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:49.391Z,1516716289.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:49.777Z,1516716289.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:49.792Z,1516716289.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:50.187Z,1516716290.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:50.202Z,1516716290.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:50.587Z,1516716290.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:50.602Z,1516716290.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:50.987Z,1516716290.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:51.002Z,1516716291.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:51.374Z,1516716291.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:51.389Z,1516716291.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:51.769Z,1516716291.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:51.792Z,1516716291.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:52.169Z,1516716292.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:52.191Z,1516716292.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:52.578Z,1516716292.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:52.593Z,1516716292.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:52.968Z,1516716292.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:52.995Z,1516716292.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:53.386Z,1516716293.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:53.415Z,1516716293.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:53.788Z,1516716293.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:53.803Z,1516716293.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:54.188Z,1516716294.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:54.203Z,1516716294.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:54.565Z,1516716294.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:54.596Z,1516716294.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:54.965Z,1516716294.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:55.004Z,1516716295.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:55.366Z,1516716295.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:55.405Z,1516716295.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:55.765Z,1516716295.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:55.801Z,1516716295.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:56.179Z,1516716296.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:56.214Z,1516716296.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:56.598Z,1516716296.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:56.613Z,1516716296.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:56.987Z,1516716296.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:57.017Z,1516716297.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:57.369Z,1516716297.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:57.402Z,1516716297.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:57.770Z,1516716297.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:57.785Z,1516716297.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:58.176Z,1516716298.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:58.197Z,1516716298.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:58.574Z,1516716298.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:58.589Z,1516716298.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:58.976Z,1516716298.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:58.991Z,1516716298.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:59.380Z,1516716299.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:59.395Z,1516716299.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:04:59.779Z,1516716299.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:04:59.794Z,1516716299.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:00.179Z,1516716300.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:00.195Z,1516716300.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:00.572Z,1516716300.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:00.593Z,1516716300.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:00.973Z,1516716300.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:00.988Z,1516716300.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:01.372Z,1516716301.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:01.391Z,1516716301.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:01.772Z,1516716301.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:01.787Z,1516716301.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:02.179Z,1516716302.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:02.194Z,1516716302.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:02.579Z,1516716302.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:02.594Z,1516716302.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:02.979Z,1516716302.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:02.994Z,1516716302.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:03.373Z,1516716303.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:03.388Z,1516716303.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:03.772Z,1516716303.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:03.791Z,1516716303.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:04.172Z,1516716304.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:04.187Z,1516716304.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:04.574Z,1516716304.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:04.589Z,1516716304.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:04.970Z,1516716304.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:05.001Z,1516716305.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:05.379Z,1516716305.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:05.394Z,1516716305.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:05.779Z,1516716305.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:05.794Z,1516716305.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:06.180Z,1516716306.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:06.195Z,1516716306.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:06.569Z,1516716306.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:06.600Z,1516716306.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:06.975Z,1516716306.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:06.990Z,1516716306.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:07.373Z,1516716307.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:07.393Z,1516716307.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:07.782Z,1516716307.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:07.797Z,1516716307.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:08.184Z,1516716308.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:08.199Z,1516716308.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:08.583Z,1516716308.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:08.598Z,1516716308.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:08.983Z,1516716308.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:08.998Z,1516716308.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:09.376Z,1516716309.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:09.392Z,1516716309.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:09.773Z,1516716309.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:09.794Z,1516716309.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:10.173Z,1516716310.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:10.201Z,1516716310.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:10.577Z,1516716310.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:10.592Z,1516716310.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:10.966Z,1516716310.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:10.997Z,1516716310.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:11.390Z,1516716311.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:11.405Z,1516716311.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:11.790Z,1516716311.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:11.805Z,1516716311.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:12.180Z,1516716312.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:12.214Z,1516716312.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:12.566Z,1516716312.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:12.593Z,1516716312.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:12.966Z,1516716312.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:13.008Z,1516716313.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:13.367Z,1516716313.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:13.403Z,1516716313.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:13.765Z,1516716313.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:13.797Z,1516716313.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:14.187Z,1516716314.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:14.210Z,1516716314.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:14.584Z,1516716314.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:14.606Z,1516716314.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:14.987Z,1516716314.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:15.007Z,1516716315.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:15.365Z,1516716315.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:15.404Z,1516716315.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:15.763Z,1516716315.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:15.778Z,1516716315.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:16.165Z,1516716316.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:16.180Z,1516716316.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:16.570Z,1516716316.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:16.607Z,1516716316.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:16.970Z,1516716316.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:16.989Z,1516716316.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:17.387Z,1516716317.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:17.421Z,1516716317.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:17.787Z,1516716317.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:17.819Z,1516716317.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:18.176Z,1516716318.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:18.191Z,1516716318.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:18.572Z,1516716318.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:18.587Z,1516716318.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:18.973Z,1516716318.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:18.988Z,1516716318.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:19.370Z,1516716319.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:19.397Z,1516716319.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:19.773Z,1516716319.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:19.788Z,1516716319.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:20.179Z,1516716320.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:20.194Z,1516716320.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:20.579Z,1516716320.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:20.594Z,1516716320.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:20.979Z,1516716320.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:20.994Z,1516716320.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:21.374Z,1516716321.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:21.389Z,1516716321.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:21.772Z,1516716321.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:21.791Z,1516716321.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:22.169Z,1516716322.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:22.191Z,1516716322.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:22.575Z,1516716322.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:22.589Z,1516716322.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:22.968Z,1516716322.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:22.989Z,1516716322.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:23.379Z,1516716323.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:23.394Z,1516716323.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:23.779Z,1516716323.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:23.794Z,1516716323.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:24.178Z,1516716324.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:24.201Z,1516716324.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:24.573Z,1516716324.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:24.588Z,1516716324.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:24.974Z,1516716324.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:24.989Z,1516716324.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:25.374Z,1516716325.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:25.389Z,1516716325.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:25.773Z,1516716325.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:25.788Z,1516716325.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:26.179Z,1516716326.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:26.194Z,1516716326.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:26.579Z,1516716326.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:26.594Z,1516716326.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:26.988Z,1516716326.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:27.002Z,1516716327.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:27.374Z,1516716327.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:27.389Z,1516716327.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:27.772Z,1516716327.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:27.793Z,1516716327.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:28.178Z,1516716328.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:28.205Z,1516716328.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:28.573Z,1516716328.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:28.600Z,1516716328.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:28.969Z,1516716328.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:28.997Z,1516716328.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:29.388Z,1516716329.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:29.415Z,1516716329.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:29.787Z,1516716329.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:29.828Z,1516716329.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:30.180Z,1516716330.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:30.209Z,1516716330.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:30.573Z,1516716330.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:30.588Z,1516716330.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:30.977Z,1516716330.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:30.992Z,1516716330.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:31.373Z,1516716331.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:31.392Z,1516716331.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:31.777Z,1516716331.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:31.797Z,1516716331.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:32.187Z,1516716332.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:32.208Z,1516716332.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:32.586Z,1516716332.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:32.601Z,1516716332.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:32.986Z,1516716332.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:33.001Z,1516716333.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:33.378Z,1516716333.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:33.393Z,1516716333.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:33.765Z,1516716333.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:33.797Z,1516716333.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:34.165Z,1516716334.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:34.191Z,1516716334.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:34.578Z,1516716334.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:34.593Z,1516716334.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:34.963Z,1516716334.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:34.998Z,1516716334.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:35.387Z,1516716335.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:35.402Z,1516716335.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:35.788Z,1516716335.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:35.802Z,1516716335.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:36.187Z,1516716336.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:36.202Z,1516716336.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:36.580Z,1516716336.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:36.601Z,1516716336.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:36.965Z,1516716336.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:37.001Z,1516716337.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:37.377Z,1516716337.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:37.392Z,1516716337.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:37.765Z,1516716337.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:37.797Z,1516716337.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:38.188Z,1516716338.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:38.203Z,1516716338.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:41.292Z,1516716341.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:41.308Z,1516716341.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:41.434Z,1516716341.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:41.469Z,1516716341.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:41.781Z,1516716341.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:41.801Z,1516716341.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:42.186Z,1516716342.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:42.201Z,1516716342.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:42.586Z,1516716342.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:42.609Z,1516716342.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:42.980Z,1516716342.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:42.999Z,1516716342.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:43.396Z,1516716343.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:43.410Z,1516716343.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:43.795Z,1516716343.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:43.810Z,1516716343.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:44.195Z,1516716344.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:44.217Z,1516716344.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:44.582Z,1516716344.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:44.597Z,1516716344.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:44.980Z,1516716344.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:44.998Z,1516716344.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:45.386Z,1516716345.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:45.401Z,1516716345.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:45.782Z,1516716345.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:45.797Z,1516716345.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:46.191Z,1516716346.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:46.206Z,1516716346.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:46.595Z,1516716346.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:46.610Z,1516716346.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:46.996Z,1516716346.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:47.011Z,1516716347.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:47.384Z,1516716347.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:47.398Z,1516716347.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:47.791Z,1516716347.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:47.806Z,1516716347.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:48.184Z,1516716348.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:48.220Z,1516716348.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:48.601Z,1516716348.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:48.616Z,1516716348.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:48.987Z,1516716348.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:49.021Z,1516716349.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:49.374Z,1516716349.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:49.388Z,1516716349.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:49.773Z,1516716349.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:49.788Z,1516716349.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:50.187Z,1516716350.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:50.215Z,1516716350.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:50.588Z,1516716350.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:50.623Z,1516716350.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:50.984Z,1516716350.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:51.015Z,1516716351.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:51.382Z,1516716351.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:51.397Z,1516716351.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:51.780Z,1516716351.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:51.796Z,1516716351.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:52.180Z,1516716352.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:52.196Z,1516716352.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:52.596Z,1516716352.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:52.627Z,1516716352.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:52.996Z,1516716352.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:53.028Z,1516716353.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:53.379Z,1516716353.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:53.401Z,1516716353.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:53.785Z,1516716353.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:53.800Z,1516716353.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:54.188Z,1516716354.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:54.203Z,1516716354.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:54.587Z,1516716354.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:54.602Z,1516716354.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:54.988Z,1516716354.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:55.003Z,1516716355.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:55.385Z,1516716355.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:55.401Z,1516716355.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:55.781Z,1516716355.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:55.796Z,1516716355.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:56.187Z,1516716356.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:56.203Z,1516716356.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:56.591Z,1516716356.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:56.606Z,1516716356.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:56.984Z,1516716356.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:57.011Z,1516716357.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:57.386Z,1516716357.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:57.401Z,1516716357.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:57.786Z,1516716357.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:57.800Z,1516716357.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:58.186Z,1516716358.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:58.205Z,1516716358.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:58.595Z,1516716358.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:58.617Z,1516716358.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:58.991Z,1516716358.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:59.006Z,1516716359.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:59.382Z,1516716359.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:59.397Z,1516716359.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:05:59.785Z,1516716359.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:05:59.800Z,1516716359.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:00.191Z,1516716360.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:00.206Z,1516716360.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:00.591Z,1516716360.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:00.606Z,1516716360.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:00.990Z,1516716360.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:01.005Z,1516716361.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:01.386Z,1516716361.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:01.414Z,1516716361.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:01.781Z,1516716361.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:01.801Z,1516716361.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:02.190Z,1516716362.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:02.213Z,1516716362.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:02.591Z,1516716362.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:02.606Z,1516716362.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:02.987Z,1516716362.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:03.002Z,1516716363.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:03.386Z,1516716363.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:03.401Z,1516716363.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:03.785Z,1516716363.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:03.800Z,1516716363.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:04.186Z,1516716364.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:04.202Z,1516716364.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:04.591Z,1516716364.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:04.606Z,1516716364.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:04.991Z,1516716364.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:05.006Z,1516716365.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:05.390Z,1516716365.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:05.405Z,1516716365.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:05.784Z,1516716365.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:05.805Z,1516716365.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:06.195Z,1516716366.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:06.210Z,1516716366.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:06.588Z,1516716366.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:06.603Z,1516716366.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:06.995Z,1516716366.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:07.010Z,1516716367.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:07.382Z,1516716367.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:07.397Z,1516716367.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:07.780Z,1516716367.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:07.799Z,1516716367.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:08.195Z,1516716368.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:08.210Z,1516716368.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:08.595Z,1516716368.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:08.610Z,1516716368.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:08.988Z,1516716368.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:09.003Z,1516716369.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:09.386Z,1516716369.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:09.401Z,1516716369.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:09.785Z,1516716369.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:09.800Z,1516716369.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:10.184Z,1516716370.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:10.211Z,1516716370.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:10.595Z,1516716370.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:10.610Z,1516716370.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:11.000Z,1516716371.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:11.015Z,1516716371.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:11.373Z,1516716371.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:11.428Z,1516716371.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:11.835Z,1516716371.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:11.850Z,1516716371.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:12.191Z,1516716372.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:12.206Z,1516716372.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:12.601Z,1516716372.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:12.641Z,1516716372.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:12.994Z,1516716372.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:13.013Z,1516716373.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:13.382Z,1516716373.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:13.458Z,1516716373.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:13.461Z,1516716373.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:13.461Z,1516716373.461 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 216 2018-01-23T14:06:13.461Z,1516716373.461 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:06:13.521Z,1516716373.521 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:06:13.779Z,1516716373.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:13.818Z,1516716373.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:13.863Z,1516716373.863 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:06:13.863Z,1516716373.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 216 2018-01-23T14:06:14.186Z,1516716374.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:14.201Z,1516716374.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:14.202Z,1516716374.202 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:06:14.227Z,1516716374.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:06:14.227Z,1516716374.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:06:14.601Z,1516716374.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:14.652Z,1516716374.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:14.988Z,1516716374.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:15.003Z,1516716375.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:15.383Z,1516716375.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:15.417Z,1516716375.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:15.791Z,1516716375.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:15.806Z,1516716375.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:16.188Z,1516716376.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:16.218Z,1516716376.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:16.590Z,1516716376.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:16.624Z,1516716376.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:17.004Z,1516716377.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:17.066Z,1516716377.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:17.388Z,1516716377.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:17.420Z,1516716377.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:17.791Z,1516716377.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:17.829Z,1516716377.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:18.193Z,1516716378.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:18.248Z,1516716378.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:18.612Z,1516716378.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:18.639Z,1516716378.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:18.993Z,1516716378.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:19.029Z,1516716379.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:19.429Z,1516716379.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:19.475Z,1516716379.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:19.476Z,1516716379.476 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 216 2018-01-23T14:06:19.476Z,1516716379.476 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:06:19.488Z,1516716379.488 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:19.488Z,1516716379.488 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 216 2018-01-23T14:06:19.488Z,1516716379.488 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:06:19.500Z,1516716379.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:06:19.501Z,1516716379.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:06:19.783Z,1516716379.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:19.854Z,1516716379.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:06:19.854Z,1516716379.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 216 2018-01-23T14:06:19.859Z,1516716379.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:06:19.859Z,1516716379.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 216 2018-01-23T14:06:20.203Z,1516716380.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:20.260Z,1516716380.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:06:20.261Z,1516716380.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:06:20.261Z,1516716380.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:06:20.261Z,1516716380.261 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:06:20.262Z,1516716380.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:06:20.262Z,1516716380.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:06:20.597Z,1516716380.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:20.639Z,1516716380.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:06:20.640Z,1516716380.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:20.993Z,1516716380.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:21.012Z,1516716381.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s. 2018-01-23T14:06:21.013Z,1516716381.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:21.384Z,1516716381.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:21.448Z,1516716381.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:06:21.449Z,1516716381.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:21.774Z,1516716381.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:21.846Z,1516716381.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:06:21.847Z,1516716381.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:22.198Z,1516716382.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:22.247Z,1516716382.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s. 2018-01-23T14:06:22.248Z,1516716382.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:22.598Z,1516716382.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:22.617Z,1516716382.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s. 2018-01-23T14:06:22.618Z,1516716382.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:22.985Z,1516716382.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:23.050Z,1516716383.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:06:23.051Z,1516716383.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:23.374Z,1516716383.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:23.389Z,1516716383.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T14:06:23.390Z,1516716383.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:23.797Z,1516716383.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:23.834Z,1516716383.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:06:23.839Z,1516716383.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:24.180Z,1516716384.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:24.233Z,1516716384.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:06:24.234Z,1516716384.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:24.589Z,1516716384.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:24.626Z,1516716384.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:06:24.632Z,1516716384.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:24.997Z,1516716384.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:25.032Z,1516716385.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:06:25.033Z,1516716385.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:25.397Z,1516716385.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:25.456Z,1516716385.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:06:25.456Z,1516716385.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:25.791Z,1516716385.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:25.833Z,1516716385.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:06:25.834Z,1516716385.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:26.183Z,1516716386.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:26.202Z,1516716386.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T14:06:26.207Z,1516716386.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:26.597Z,1516716386.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:26.639Z,1516716386.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:06:26.640Z,1516716386.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:26.981Z,1516716386.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:27.013Z,1516716387.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T14:06:27.014Z,1516716387.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:27.395Z,1516716387.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:27.414Z,1516716387.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T14:06:27.419Z,1516716387.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:27.810Z,1516716387.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:27.860Z,1516716387.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:06:27.861Z,1516716387.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:28.185Z,1516716388.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:28.221Z,1516716388.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T14:06:28.222Z,1516716388.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:28.579Z,1516716388.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:28.593Z,1516716388.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T14:06:28.594Z,1516716388.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:28.990Z,1516716388.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:29.025Z,1516716389.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:06:29.039Z,1516716389.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:29.384Z,1516716389.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:29.427Z,1516716389.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T14:06:29.428Z,1516716389.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:29.784Z,1516716389.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:29.866Z,1516716389.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:06:29.875Z,1516716389.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:30.187Z,1516716390.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:30.231Z,1516716390.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:06:30.232Z,1516716390.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:30.581Z,1516716390.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:30.595Z,1516716390.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T14:06:30.596Z,1516716390.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:30.996Z,1516716390.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:31.026Z,1516716391.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:06:31.027Z,1516716391.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:31.392Z,1516716391.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:31.483Z,1516716391.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:06:31.484Z,1516716391.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:31.788Z,1516716391.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:31.803Z,1516716391.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T14:06:31.804Z,1516716391.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:32.186Z,1516716392.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:32.201Z,1516716392.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T14:06:32.203Z,1516716392.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:32.587Z,1516716392.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:32.603Z,1516716392.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T14:06:32.604Z,1516716392.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:32.966Z,1516716392.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:33.004Z,1516716393.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T14:06:33.004Z,1516716393.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:33.391Z,1516716393.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:33.413Z,1516716393.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T14:06:33.414Z,1516716393.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:33.792Z,1516716393.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:33.806Z,1516716393.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T14:06:33.807Z,1516716393.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:34.188Z,1516716394.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:34.210Z,1516716394.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T14:06:34.216Z,1516716394.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:34.585Z,1516716394.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:34.604Z,1516716394.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T14:06:34.605Z,1516716394.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:34.985Z,1516716394.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:35.000Z,1516716395.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T14:06:35.001Z,1516716395.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:35.382Z,1516716395.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:35.398Z,1516716395.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T14:06:35.399Z,1516716395.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:35.790Z,1516716395.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:35.805Z,1516716395.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T14:06:35.806Z,1516716395.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:36.186Z,1516716396.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:36.200Z,1516716396.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T14:06:36.201Z,1516716396.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:36.594Z,1516716396.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:36.610Z,1516716396.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T14:06:36.611Z,1516716396.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:36.994Z,1516716396.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:37.009Z,1516716397.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T14:06:37.010Z,1516716397.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:37.013Z,1516716397.013 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:06:37.014Z,1516716397.014 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:06:37.014Z,1516716397.014 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:06:37.014Z,1516716397.014 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:06:37.396Z,1516716397.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:37.411Z,1516716397.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T14:06:37.412Z,1516716397.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:37.416Z,1516716397.416 [Default:CheckIn:D] Stopped 2018-01-23T14:06:37.416Z,1516716397.416 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:06:37.786Z,1516716397.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:37.808Z,1516716397.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T14:06:37.809Z,1516716397.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:37.813Z,1516716397.813 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 648.755924 min 2018-01-23T14:06:37.813Z,1516716397.813 [Default:CheckIn:E] Stopped 2018-01-23T14:06:37.813Z,1516716397.813 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:06:37.813Z,1516716397.813 [Default:CheckIn] Stopped 2018-01-23T14:06:37.813Z,1516716397.813 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:06:37.814Z,1516716397.814 [Default:CheckIn](INFO): Running loop #64 2018-01-23T14:06:37.814Z,1516716397.814 [Default:CheckIn] Running Loop=64 2018-01-23T14:06:37.814Z,1516716397.814 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:06:37.814Z,1516716397.814 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:06:38.190Z,1516716398.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:38.208Z,1516716398.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T14:06:38.209Z,1516716398.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:41.275Z,1516716401.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:41.304Z,1516716401.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:41.401Z,1516716401.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:41.421Z,1516716401.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:41.771Z,1516716401.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:41.795Z,1516716401.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:42.171Z,1516716402.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:42.196Z,1516716402.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:42.556Z,1516716402.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:42.571Z,1516716402.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:42.954Z,1516716402.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:42.969Z,1516716402.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:43.357Z,1516716403.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:43.371Z,1516716403.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:43.755Z,1516716403.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:43.777Z,1516716403.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:44.154Z,1516716404.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:44.169Z,1516716404.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:44.556Z,1516716404.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:44.571Z,1516716404.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:44.956Z,1516716404.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:44.971Z,1516716404.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:45.371Z,1516716405.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:45.401Z,1516716405.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:45.753Z,1516716405.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:45.772Z,1516716405.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:46.148Z,1516716406.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:46.175Z,1516716406.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:46.559Z,1516716406.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:46.574Z,1516716406.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:46.958Z,1516716406.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:46.972Z,1516716406.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:47.360Z,1516716407.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:47.375Z,1516716407.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:47.760Z,1516716407.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:47.775Z,1516716407.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:48.160Z,1516716408.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:48.175Z,1516716408.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:48.552Z,1516716408.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:48.570Z,1516716408.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:48.961Z,1516716408.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:48.976Z,1516716408.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:49.354Z,1516716409.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:49.369Z,1516716409.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:49.752Z,1516716409.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:49.780Z,1516716409.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:50.165Z,1516716410.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:50.180Z,1516716410.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:50.568Z,1516716410.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:50.589Z,1516716410.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:50.964Z,1516716410.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:50.979Z,1516716410.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:51.365Z,1516716411.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:51.380Z,1516716411.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:51.756Z,1516716411.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:51.772Z,1516716411.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:52.153Z,1516716412.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:52.176Z,1516716412.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:52.562Z,1516716412.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:52.577Z,1516716412.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:52.965Z,1516716412.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:52.980Z,1516716412.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:53.368Z,1516716413.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:53.382Z,1516716413.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:53.771Z,1516716413.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:53.786Z,1516716413.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:54.172Z,1516716414.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:54.193Z,1516716414.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:54.560Z,1516716414.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:54.581Z,1516716414.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:54.946Z,1516716414.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:54.977Z,1516716414.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:55.362Z,1516716415.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:55.377Z,1516716415.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:55.757Z,1516716415.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:55.776Z,1516716415.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:56.146Z,1516716416.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:56.183Z,1516716416.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:56.560Z,1516716416.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:56.587Z,1516716416.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:56.960Z,1516716416.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:56.993Z,1516716416.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:57.364Z,1516716417.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:57.397Z,1516716417.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:57.759Z,1516716417.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:57.786Z,1516716417.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:58.152Z,1516716418.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:58.185Z,1516716418.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:58.557Z,1516716418.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:58.580Z,1516716418.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:58.951Z,1516716418.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:58.966Z,1516716418.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:59.362Z,1516716419.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:59.397Z,1516716419.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:06:59.767Z,1516716419.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:06:59.798Z,1516716419.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:00.167Z,1516716420.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:00.182Z,1516716420.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:00.557Z,1516716420.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:00.572Z,1516716420.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:00.950Z,1516716420.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:00.980Z,1516716420.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:01.363Z,1516716421.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:01.378Z,1516716421.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:01.755Z,1516716421.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:01.778Z,1516716421.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:02.160Z,1516716422.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:02.175Z,1516716422.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:02.564Z,1516716422.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:02.591Z,1516716422.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:02.967Z,1516716422.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:02.990Z,1516716422.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:03.366Z,1516716423.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:03.385Z,1516716423.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:03.756Z,1516716423.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:03.789Z,1516716423.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:04.144Z,1516716424.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:04.186Z,1516716424.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:04.566Z,1516716424.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:04.581Z,1516716424.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:04.965Z,1516716424.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:04.981Z,1516716424.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:05.364Z,1516716425.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:05.391Z,1516716425.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:05.772Z,1516716425.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:05.788Z,1516716425.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:06.161Z,1516716426.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:06.192Z,1516716426.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:06.552Z,1516716426.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:06.578Z,1516716426.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:06.946Z,1516716426.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:06.984Z,1516716426.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:07.345Z,1516716427.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:07.392Z,1516716427.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:07.745Z,1516716427.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:07.765Z,1516716427.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:08.155Z,1516716428.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:08.187Z,1516716428.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:08.564Z,1516716428.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:08.600Z,1516716428.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:08.969Z,1516716428.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:09.001Z,1516716429.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:09.373Z,1516716429.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:09.405Z,1516716429.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:09.760Z,1516716429.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:09.795Z,1516716429.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:10.155Z,1516716430.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:10.170Z,1516716430.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:10.550Z,1516716430.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:10.578Z,1516716430.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:10.954Z,1516716430.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:10.973Z,1516716430.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:11.359Z,1516716431.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:11.374Z,1516716431.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:11.761Z,1516716431.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:11.792Z,1516716431.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:12.163Z,1516716432.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:12.213Z,1516716432.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:12.549Z,1516716432.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:12.589Z,1516716432.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:12.949Z,1516716432.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:12.967Z,1516716432.967 [PNI_TCM](ERROR): CRC does not match. Expected:0x64219 got:0x33941 2018-01-23T14:07:13.005Z,1516716433.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:13.361Z,1516716433.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:13.376Z,1516716433.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:13.749Z,1516716433.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:13.793Z,1516716433.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:14.148Z,1516716434.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:14.179Z,1516716434.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:14.568Z,1516716434.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:14.582Z,1516716434.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:14.968Z,1516716434.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:14.989Z,1516716434.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:15.364Z,1516716435.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:15.412Z,1516716435.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:15.744Z,1516716435.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:15.766Z,1516716435.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x54621 got:0x61719 2018-01-23T14:07:15.785Z,1516716435.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:16.156Z,1516716436.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:16.172Z,1516716436.172 [PNI_TCM](ERROR): CRC does not match. Expected:0x42039 got:0x7106 2018-01-23T14:07:16.206Z,1516716436.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:16.555Z,1516716436.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:16.578Z,1516716436.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:16.944Z,1516716436.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:16.982Z,1516716436.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:17.370Z,1516716437.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:17.387Z,1516716437.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:17.764Z,1516716437.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:17.791Z,1516716437.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:18.158Z,1516716438.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:18.185Z,1516716438.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:18.544Z,1516716438.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:18.584Z,1516716438.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:18.952Z,1516716438.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:18.983Z,1516716438.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:19.344Z,1516716439.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:19.385Z,1516716439.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:19.745Z,1516716439.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:19.781Z,1516716439.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:20.149Z,1516716440.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:20.189Z,1516716440.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:20.555Z,1516716440.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:20.589Z,1516716440.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:20.965Z,1516716440.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:20.999Z,1516716440.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:21.376Z,1516716441.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:21.393Z,1516716441.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:21.750Z,1516716441.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:21.792Z,1516716441.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:22.153Z,1516716442.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:22.184Z,1516716442.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:22.550Z,1516716442.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:22.568Z,1516716442.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:22.953Z,1516716442.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:22.971Z,1516716442.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:23.364Z,1516716443.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:23.401Z,1516716443.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:23.771Z,1516716443.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:23.805Z,1516716443.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:24.169Z,1516716444.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:24.196Z,1516716444.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:24.553Z,1516716444.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:24.600Z,1516716444.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:24.953Z,1516716444.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:24.996Z,1516716444.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:25.357Z,1516716445.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:25.372Z,1516716445.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:25.754Z,1516716445.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:25.771Z,1516716445.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:26.150Z,1516716446.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:26.177Z,1516716446.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:26.567Z,1516716446.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:26.604Z,1516716446.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:26.964Z,1516716446.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:27.001Z,1516716447.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:27.364Z,1516716447.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:27.398Z,1516716447.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:27.749Z,1516716447.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:27.785Z,1516716447.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:28.151Z,1516716448.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:28.172Z,1516716448.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:28.550Z,1516716448.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:28.577Z,1516716448.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:28.957Z,1516716448.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:28.973Z,1516716448.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:29.358Z,1516716449.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:29.377Z,1516716449.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:29.764Z,1516716449.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:29.805Z,1516716449.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:30.160Z,1516716450.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:30.174Z,1516716450.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:30.553Z,1516716450.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:30.568Z,1516716450.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:30.951Z,1516716450.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:30.989Z,1516716450.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:31.349Z,1516716451.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:31.377Z,1516716451.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:31.763Z,1516716451.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:31.778Z,1516716451.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:32.144Z,1516716452.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:32.177Z,1516716452.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:32.570Z,1516716452.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:32.588Z,1516716452.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:32.972Z,1516716452.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:33.022Z,1516716453.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:33.360Z,1516716453.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:33.382Z,1516716453.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:33.744Z,1516716453.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:33.778Z,1516716453.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:34.149Z,1516716454.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:34.180Z,1516716454.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:34.545Z,1516716454.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:34.584Z,1516716454.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:34.944Z,1516716454.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:34.982Z,1516716454.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:35.369Z,1516716455.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:35.385Z,1516716455.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:35.764Z,1516716455.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:35.796Z,1516716455.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:36.165Z,1516716456.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:36.184Z,1516716456.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:36.550Z,1516716456.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:36.577Z,1516716456.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:36.944Z,1516716456.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:36.981Z,1516716456.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:37.360Z,1516716457.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:37.391Z,1516716457.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:37.760Z,1516716457.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:37.793Z,1516716457.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:38.160Z,1516716458.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:38.186Z,1516716458.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:38.545Z,1516716458.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:38.598Z,1516716458.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:41.642Z,1516716461.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:41.692Z,1516716461.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:41.809Z,1516716461.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:41.834Z,1516716461.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:42.160Z,1516716462.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:42.197Z,1516716462.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:42.561Z,1516716462.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:42.586Z,1516716462.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:42.945Z,1516716462.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:42.962Z,1516716462.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:43.346Z,1516716463.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:43.362Z,1516716463.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:43.743Z,1516716463.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:43.773Z,1516716463.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:44.150Z,1516716464.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:44.165Z,1516716464.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:44.553Z,1516716464.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:44.569Z,1516716464.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:44.953Z,1516716464.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:44.968Z,1516716464.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:45.356Z,1516716465.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:45.371Z,1516716465.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:45.747Z,1516716465.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:45.763Z,1516716465.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:46.145Z,1516716466.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:46.165Z,1516716466.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:46.553Z,1516716466.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:46.568Z,1516716466.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:46.946Z,1516716466.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:46.961Z,1516716466.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:47.356Z,1516716467.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:47.372Z,1516716467.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:47.753Z,1516716467.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:47.777Z,1516716467.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:48.159Z,1516716468.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:48.173Z,1516716468.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:48.541Z,1516716468.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:48.569Z,1516716468.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:48.948Z,1516716468.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:48.968Z,1516716468.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:49.353Z,1516716469.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:49.376Z,1516716469.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:49.760Z,1516716469.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:49.779Z,1516716469.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:50.156Z,1516716470.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:50.177Z,1516716470.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:50.537Z,1516716470.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:50.567Z,1516716470.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:50.934Z,1516716470.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:50.961Z,1516716470.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:51.364Z,1516716471.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:51.380Z,1516716471.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:51.761Z,1516716471.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:51.776Z,1516716471.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:52.156Z,1516716472.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:52.174Z,1516716472.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:52.537Z,1516716472.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:52.576Z,1516716472.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:52.936Z,1516716472.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:52.971Z,1516716472.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:53.356Z,1516716473.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:53.375Z,1516716473.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:53.759Z,1516716473.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:53.775Z,1516716473.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:54.157Z,1516716474.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:54.172Z,1516716474.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:54.537Z,1516716474.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:54.572Z,1516716474.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:54.936Z,1516716474.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:54.969Z,1516716474.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:55.348Z,1516716475.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:55.382Z,1516716475.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:55.751Z,1516716475.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:55.778Z,1516716475.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:56.148Z,1516716476.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:56.174Z,1516716476.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:56.537Z,1516716476.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:56.553Z,1516716476.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:56.934Z,1516716476.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:56.950Z,1516716476.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:57.356Z,1516716477.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:57.382Z,1516716477.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:57.755Z,1516716477.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:57.783Z,1516716477.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:58.152Z,1516716478.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:58.183Z,1516716478.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:58.542Z,1516716478.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:58.557Z,1516716478.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:58.944Z,1516716478.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:58.959Z,1516716478.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:59.356Z,1516716479.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:59.384Z,1516716479.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:07:59.756Z,1516716479.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:07:59.783Z,1516716479.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:00.160Z,1516716480.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:00.174Z,1516716480.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:00.546Z,1516716480.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:00.562Z,1516716480.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:00.940Z,1516716480.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:00.967Z,1516716480.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:01.351Z,1516716481.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:01.366Z,1516716481.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:01.752Z,1516716481.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:01.767Z,1516716481.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:02.151Z,1516716482.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:02.166Z,1516716482.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:02.546Z,1516716482.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:02.561Z,1516716482.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:02.944Z,1516716482.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:02.960Z,1516716482.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:03.350Z,1516716483.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:03.365Z,1516716483.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:03.751Z,1516716483.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:03.765Z,1516716483.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:04.150Z,1516716484.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:04.165Z,1516716484.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:04.541Z,1516716484.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:04.563Z,1516716484.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:04.945Z,1516716484.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:04.960Z,1516716484.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:05.350Z,1516716485.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:05.365Z,1516716485.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:05.752Z,1516716485.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:05.767Z,1516716485.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:06.151Z,1516716486.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:06.165Z,1516716486.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:06.549Z,1516716486.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:06.569Z,1516716486.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:06.948Z,1516716486.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:06.963Z,1516716486.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:07.351Z,1516716487.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:07.366Z,1516716487.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:07.756Z,1516716487.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:07.771Z,1516716487.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:08.152Z,1516716488.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:08.167Z,1516716488.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:08.546Z,1516716488.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:08.562Z,1516716488.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:08.940Z,1516716488.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:08.961Z,1516716488.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:09.350Z,1516716489.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:09.365Z,1516716489.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:09.752Z,1516716489.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:09.766Z,1516716489.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:10.150Z,1516716490.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:10.165Z,1516716490.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:10.541Z,1516716490.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:10.563Z,1516716490.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:10.945Z,1516716490.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:10.961Z,1516716490.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:11.341Z,1516716491.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:11.368Z,1516716491.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:11.755Z,1516716491.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:11.770Z,1516716491.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:12.155Z,1516716492.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:12.170Z,1516716492.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:12.554Z,1516716492.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:12.569Z,1516716492.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:12.945Z,1516716492.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:12.965Z,1516716492.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:13.345Z,1516716493.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:13.360Z,1516716493.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:13.744Z,1516716493.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:13.784Z,1516716493.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:14.149Z,1516716494.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:14.169Z,1516716494.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:14.559Z,1516716494.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:14.574Z,1516716494.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:14.955Z,1516716494.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:14.974Z,1516716494.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:15.356Z,1516716495.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:15.371Z,1516716495.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:15.736Z,1516716495.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:15.780Z,1516716495.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:16.136Z,1516716496.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:16.169Z,1516716496.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:16.540Z,1516716496.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:16.573Z,1516716496.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:16.937Z,1516716496.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:16.977Z,1516716496.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:17.335Z,1516716497.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:17.350Z,1516716497.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:17.765Z,1516716497.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:17.780Z,1516716497.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:18.151Z,1516716498.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:18.187Z,1516716498.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:18.548Z,1516716498.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:18.574Z,1516716498.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:18.937Z,1516716498.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:18.953Z,1516716498.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:19.337Z,1516716499.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:19.353Z,1516716499.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:19.746Z,1516716499.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:19.761Z,1516716499.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:20.142Z,1516716500.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:20.165Z,1516716500.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:20.555Z,1516716500.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:20.570Z,1516716500.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:20.956Z,1516716500.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:20.988Z,1516716500.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:21.352Z,1516716501.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:21.368Z,1516716501.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:21.746Z,1516716501.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:21.761Z,1516716501.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:22.141Z,1516716502.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:22.164Z,1516716502.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:22.545Z,1516716502.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:22.569Z,1516716502.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:22.952Z,1516716502.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:22.967Z,1516716502.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:23.340Z,1516716503.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:23.373Z,1516716503.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:23.760Z,1516716503.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:23.775Z,1516716503.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:24.162Z,1516716504.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:24.177Z,1516716504.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:24.556Z,1516716504.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:24.576Z,1516716504.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:24.953Z,1516716504.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:24.969Z,1516716504.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:25.337Z,1516716505.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:25.367Z,1516716505.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:25.738Z,1516716505.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:25.769Z,1516716505.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:26.137Z,1516716506.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:26.165Z,1516716506.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:26.556Z,1516716506.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:26.577Z,1516716506.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:26.952Z,1516716506.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:26.980Z,1516716506.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:27.357Z,1516716507.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:27.372Z,1516716507.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:27.736Z,1516716507.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:27.780Z,1516716507.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:28.136Z,1516716508.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:28.169Z,1516716508.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:28.536Z,1516716508.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:28.553Z,1516716508.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:28.937Z,1516716508.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:28.953Z,1516716508.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:29.338Z,1516716509.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:29.354Z,1516716509.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:29.760Z,1516716509.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:29.786Z,1516716509.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:30.163Z,1516716510.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:30.190Z,1516716510.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:30.556Z,1516716510.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:30.592Z,1516716510.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:30.943Z,1516716510.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:30.959Z,1516716510.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:31.344Z,1516716511.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:31.359Z,1516716511.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:31.742Z,1516716511.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:31.769Z,1516716511.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:32.143Z,1516716512.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:32.159Z,1516716512.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:32.548Z,1516716512.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:32.563Z,1516716512.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:32.948Z,1516716512.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:32.963Z,1516716512.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:33.348Z,1516716513.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:33.363Z,1516716513.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:33.744Z,1516716513.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:33.759Z,1516716513.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:34.144Z,1516716514.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:34.159Z,1516716514.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:34.542Z,1516716514.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:34.562Z,1516716514.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:34.946Z,1516716514.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:34.961Z,1516716514.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:35.344Z,1516716515.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:35.365Z,1516716515.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:35.750Z,1516716515.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:35.765Z,1516716515.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:36.151Z,1516716516.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:36.165Z,1516716516.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:36.554Z,1516716516.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:36.577Z,1516716516.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:36.943Z,1516716516.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:36.977Z,1516716516.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:37.341Z,1516716517.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:37.369Z,1516716517.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:37.741Z,1516716517.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:37.768Z,1516716517.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:38.136Z,1516716518.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:38.163Z,1516716518.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:38.557Z,1516716518.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:38.572Z,1516716518.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:38.956Z,1516716518.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:38.987Z,1516716518.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:42.071Z,1516716522.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:42.087Z,1516716522.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:42.183Z,1516716522.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:42.212Z,1516716522.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:42.569Z,1516716522.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:42.584Z,1516716522.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:42.972Z,1516716522.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:42.986Z,1516716522.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:43.368Z,1516716523.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:43.383Z,1516716523.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:43.771Z,1516716523.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:43.786Z,1516716523.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:44.175Z,1516716524.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:44.190Z,1516716524.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:44.572Z,1516716524.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:44.586Z,1516716524.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:44.969Z,1516716524.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:44.984Z,1516716524.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:45.369Z,1516716525.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:45.384Z,1516716525.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:45.766Z,1516716525.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:45.789Z,1516716525.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:46.168Z,1516716526.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:46.186Z,1516716526.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:46.575Z,1516716526.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:46.590Z,1516716526.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:46.979Z,1516716526.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:46.994Z,1516716526.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:47.379Z,1516716527.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:47.394Z,1516716527.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:47.770Z,1516716527.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:47.784Z,1516716527.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:48.168Z,1516716528.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:48.187Z,1516716528.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:48.568Z,1516716528.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:48.587Z,1516716528.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:48.971Z,1516716528.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:48.986Z,1516716528.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:49.365Z,1516716529.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:49.392Z,1516716529.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:49.778Z,1516716529.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:49.794Z,1516716529.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:50.179Z,1516716530.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:50.194Z,1516716530.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:50.579Z,1516716530.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:50.595Z,1516716530.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:50.968Z,1516716530.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:50.987Z,1516716530.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:51.370Z,1516716531.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:51.384Z,1516716531.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:51.769Z,1516716531.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:51.789Z,1516716531.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:52.165Z,1516716532.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:52.187Z,1516716532.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:52.579Z,1516716532.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:52.594Z,1516716532.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:52.979Z,1516716532.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:52.994Z,1516716532.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:53.378Z,1516716533.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:53.393Z,1516716533.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:53.770Z,1516716533.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:53.792Z,1516716533.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:54.174Z,1516716534.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:54.189Z,1516716534.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:54.565Z,1516716534.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:54.587Z,1516716534.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:54.967Z,1516716534.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:55.005Z,1516716535.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:55.365Z,1516716535.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:55.392Z,1516716535.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:55.780Z,1516716535.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:55.795Z,1516716535.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:56.184Z,1516716536.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:56.204Z,1516716536.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:56.587Z,1516716536.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:56.609Z,1516716536.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:56.965Z,1516716536.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:56.991Z,1516716536.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:57.361Z,1516716537.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:57.394Z,1516716537.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:57.762Z,1516716537.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:57.789Z,1516716537.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:58.161Z,1516716538.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:58.197Z,1516716538.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:58.588Z,1516716538.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:58.603Z,1516716538.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:58.988Z,1516716538.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:59.009Z,1516716539.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:59.384Z,1516716539.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:59.399Z,1516716539.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:08:59.760Z,1516716539.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:08:59.794Z,1516716539.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:00.161Z,1516716540.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:00.188Z,1516716540.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:00.562Z,1516716540.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:00.593Z,1516716540.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:00.966Z,1516716540.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:01.005Z,1516716541.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:01.365Z,1516716541.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:01.417Z,1516716541.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:01.780Z,1516716541.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:01.809Z,1516716541.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:02.175Z,1516716542.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:02.205Z,1516716542.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:02.580Z,1516716542.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:02.613Z,1516716542.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:02.965Z,1516716542.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:03.001Z,1516716543.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:03.369Z,1516716543.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:03.384Z,1516716543.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:03.770Z,1516716543.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:03.785Z,1516716543.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:04.167Z,1516716544.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:04.194Z,1516716544.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:04.577Z,1516716544.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:04.597Z,1516716544.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:04.980Z,1516716544.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:04.997Z,1516716544.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:05.380Z,1516716545.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:05.395Z,1516716545.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:05.772Z,1516716545.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:05.787Z,1516716545.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:06.166Z,1516716546.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:06.188Z,1516716546.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:06.569Z,1516716546.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:06.585Z,1516716546.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:06.973Z,1516716546.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:06.988Z,1516716546.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:07.365Z,1516716547.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:07.389Z,1516716547.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:07.774Z,1516716547.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:07.811Z,1516716547.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:08.179Z,1516716548.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:08.197Z,1516716548.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:08.579Z,1516716548.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:08.594Z,1516716548.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:08.965Z,1516716548.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:08.988Z,1516716548.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:09.374Z,1516716549.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:09.390Z,1516716549.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:09.769Z,1516716549.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:09.789Z,1516716549.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:10.168Z,1516716550.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:10.188Z,1516716550.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:10.577Z,1516716550.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:10.604Z,1516716550.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:10.978Z,1516716550.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:10.994Z,1516716550.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:11.376Z,1516716551.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:11.405Z,1516716551.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:11.774Z,1516716551.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:11.789Z,1516716551.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:12.167Z,1516716552.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:12.186Z,1516716552.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:12.563Z,1516716552.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:12.596Z,1516716552.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:12.971Z,1516716552.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:12.986Z,1516716552.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:13.368Z,1516716553.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:13.395Z,1516716553.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:13.780Z,1516716553.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:13.795Z,1516716553.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:14.184Z,1516716554.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:14.199Z,1516716554.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:14.576Z,1516716554.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:14.597Z,1516716554.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:14.600Z,1516716554.600 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:14.600Z,1516716554.600 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 217 2018-01-23T14:09:14.600Z,1516716554.600 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:09:14.624Z,1516716554.624 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:09:14.961Z,1516716554.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:14.998Z,1516716554.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:15.010Z,1516716555.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:09:15.010Z,1516716555.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 217 2018-01-23T14:09:15.361Z,1516716555.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:15.397Z,1516716555.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:15.398Z,1516716555.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:09:15.399Z,1516716555.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:09:15.399Z,1516716555.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:09:15.762Z,1516716555.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:15.797Z,1516716555.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:16.161Z,1516716556.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:16.193Z,1516716556.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:16.580Z,1516716556.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:16.595Z,1516716556.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:16.982Z,1516716556.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:16.997Z,1516716556.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:17.387Z,1516716557.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:17.409Z,1516716557.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:17.761Z,1516716557.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:17.789Z,1516716557.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:18.159Z,1516716558.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:18.186Z,1516716558.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:18.561Z,1516716558.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:18.592Z,1516716558.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:18.966Z,1516716558.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:18.998Z,1516716558.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:19.361Z,1516716559.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:19.397Z,1516716559.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:19.771Z,1516716559.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:19.807Z,1516716559.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:20.183Z,1516716560.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:20.203Z,1516716560.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:20.571Z,1516716560.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:20.607Z,1516716560.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:20.607Z,1516716560.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 217 2018-01-23T14:09:20.607Z,1516716560.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:09:20.609Z,1516716560.609 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:20.609Z,1516716560.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 217 2018-01-23T14:09:20.609Z,1516716560.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:09:20.622Z,1516716560.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:09:20.622Z,1516716560.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:09:20.961Z,1516716560.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:21.024Z,1516716561.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:09:21.024Z,1516716561.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 217 2018-01-23T14:09:21.025Z,1516716561.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:09:21.025Z,1516716561.025 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 217 2018-01-23T14:09:21.365Z,1516716561.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:21.378Z,1516716561.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:09:21.379Z,1516716561.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:09:21.379Z,1516716561.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:09:21.380Z,1516716561.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:09:21.380Z,1516716561.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:09:21.380Z,1516716561.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:09:21.766Z,1516716561.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:21.781Z,1516716561.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:09:21.782Z,1516716561.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:22.165Z,1516716562.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:22.184Z,1516716562.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:09:22.185Z,1516716562.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:22.579Z,1516716562.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:22.594Z,1516716562.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:09:22.611Z,1516716562.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:22.975Z,1516716562.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:22.990Z,1516716562.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:09:22.991Z,1516716562.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:23.374Z,1516716563.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:23.389Z,1516716563.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:09:23.390Z,1516716563.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:23.770Z,1516716563.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:23.784Z,1516716563.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:09:23.785Z,1516716563.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:24.164Z,1516716564.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:24.184Z,1516716564.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:09:24.185Z,1516716564.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:24.565Z,1516716564.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:24.586Z,1516716564.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:09:24.587Z,1516716564.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:24.971Z,1516716564.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:24.985Z,1516716564.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:09:24.986Z,1516716564.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:25.368Z,1516716565.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:25.386Z,1516716565.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:09:25.387Z,1516716565.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:25.774Z,1516716565.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:25.796Z,1516716565.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:09:25.797Z,1516716565.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:26.179Z,1516716566.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:26.193Z,1516716566.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:09:26.194Z,1516716566.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:26.574Z,1516716566.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:26.589Z,1516716566.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:09:26.590Z,1516716566.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:26.969Z,1516716566.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:26.984Z,1516716566.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:09:26.984Z,1516716566.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:27.370Z,1516716567.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:27.384Z,1516716567.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:09:27.385Z,1516716567.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:27.769Z,1516716567.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:27.784Z,1516716567.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:09:27.785Z,1516716567.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:28.173Z,1516716568.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:28.187Z,1516716568.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:09:28.188Z,1516716568.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:28.575Z,1516716568.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:28.589Z,1516716568.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:09:28.590Z,1516716568.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:28.974Z,1516716568.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:28.989Z,1516716568.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:09:28.990Z,1516716568.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:29.374Z,1516716569.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:29.389Z,1516716569.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:09:29.390Z,1516716569.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:29.770Z,1516716569.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:29.784Z,1516716569.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:09:29.785Z,1516716569.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:30.164Z,1516716570.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:30.184Z,1516716570.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:09:30.185Z,1516716570.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:30.565Z,1516716570.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:30.586Z,1516716570.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:09:30.587Z,1516716570.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:30.971Z,1516716570.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:30.985Z,1516716570.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:09:30.986Z,1516716570.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:31.365Z,1516716571.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:31.386Z,1516716571.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:09:31.387Z,1516716571.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:31.774Z,1516716571.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:31.789Z,1516716571.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:09:31.790Z,1516716571.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:32.174Z,1516716572.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:32.188Z,1516716572.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:09:32.189Z,1516716572.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:32.574Z,1516716572.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:32.589Z,1516716572.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:09:32.590Z,1516716572.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:32.969Z,1516716572.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:32.988Z,1516716572.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:09:32.988Z,1516716572.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:33.370Z,1516716573.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:33.384Z,1516716573.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:09:33.385Z,1516716573.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:33.769Z,1516716573.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:33.788Z,1516716573.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:09:33.789Z,1516716573.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:34.165Z,1516716574.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:34.187Z,1516716574.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:09:34.188Z,1516716574.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:34.580Z,1516716574.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:34.595Z,1516716574.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:09:34.596Z,1516716574.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:34.978Z,1516716574.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:34.993Z,1516716574.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:09:34.994Z,1516716574.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:35.378Z,1516716575.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:35.393Z,1516716575.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:09:35.394Z,1516716575.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:35.770Z,1516716575.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:35.788Z,1516716575.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:09:35.789Z,1516716575.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:36.163Z,1516716576.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:36.186Z,1516716576.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:09:36.187Z,1516716576.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:36.581Z,1516716576.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:36.595Z,1516716576.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:09:36.596Z,1516716576.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:36.971Z,1516716576.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:36.985Z,1516716576.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:09:36.986Z,1516716576.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:37.369Z,1516716577.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:37.395Z,1516716577.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:09:37.396Z,1516716577.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:37.779Z,1516716577.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:37.794Z,1516716577.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:09:37.795Z,1516716577.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:38.183Z,1516716578.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:38.200Z,1516716578.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:09:38.201Z,1516716578.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:38.578Z,1516716578.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:38.600Z,1516716578.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:09:38.601Z,1516716578.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:38.981Z,1516716578.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:38.000Z,1516716579.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:09:39.001Z,1516716579.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:42.058Z,1516716582.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:42.084Z,1516716582.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:42.187Z,1516716582.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:42.226Z,1516716582.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:42.553Z,1516716582.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:42.586Z,1516716582.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:42.952Z,1516716582.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:42.987Z,1516716582.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:43.340Z,1516716583.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:43.356Z,1516716583.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:43.734Z,1516716583.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:43.761Z,1516716583.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:44.138Z,1516716584.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:44.154Z,1516716584.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:44.542Z,1516716584.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:44.561Z,1516716584.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:44.944Z,1516716584.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:44.960Z,1516716584.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:45.343Z,1516716585.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:45.365Z,1516716585.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:45.740Z,1516716585.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:45.757Z,1516716585.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:46.136Z,1516716586.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:46.154Z,1516716586.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:46.542Z,1516716586.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:46.559Z,1516716586.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:46.943Z,1516716586.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:46.962Z,1516716586.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:47.342Z,1516716587.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:47.365Z,1516716587.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:47.738Z,1516716587.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:47.754Z,1516716587.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:48.132Z,1516716588.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:48.153Z,1516716588.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:48.544Z,1516716588.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:48.573Z,1516716588.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:48.951Z,1516716588.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:48.965Z,1516716588.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:49.347Z,1516716589.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:49.362Z,1516716589.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:49.733Z,1516716589.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:49.756Z,1516716589.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:50.138Z,1516716590.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:50.160Z,1516716590.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:50.551Z,1516716590.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:50.566Z,1516716590.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:50.949Z,1516716590.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:50.969Z,1516716590.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:51.348Z,1516716591.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:51.363Z,1516716591.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:51.736Z,1516716591.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:51.757Z,1516716591.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:52.131Z,1516716592.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:52.164Z,1516716592.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:52.551Z,1516716592.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:52.566Z,1516716592.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:52.946Z,1516716592.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:52.962Z,1516716592.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:53.346Z,1516716593.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:53.362Z,1516716593.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:53.738Z,1516716593.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:53.753Z,1516716593.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:54.126Z,1516716594.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:54.158Z,1516716594.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:54.551Z,1516716594.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:54.566Z,1516716594.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:54.952Z,1516716594.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:54.967Z,1516716594.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:55.348Z,1516716595.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:55.363Z,1516716595.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:55.729Z,1516716595.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:55.761Z,1516716595.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:56.132Z,1516716596.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:56.161Z,1516716596.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:56.548Z,1516716596.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:56.563Z,1516716596.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:56.950Z,1516716596.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:56.973Z,1516716596.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:57.349Z,1516716597.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:57.364Z,1516716597.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:57.733Z,1516716597.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:57.760Z,1516716597.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:58.127Z,1516716598.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:58.165Z,1516716598.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:58.538Z,1516716598.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:58.575Z,1516716598.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:58.939Z,1516716598.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:58.973Z,1516716598.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:59.339Z,1516716599.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:59.366Z,1516716599.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:09:59.729Z,1516716599.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:09:59.767Z,1516716599.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:00.126Z,1516716600.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:00.141Z,1516716600.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:00.539Z,1516716600.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:00.567Z,1516716600.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:00.943Z,1516716600.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:00.979Z,1516716600.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:01.339Z,1516716601.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:01.366Z,1516716601.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:01.737Z,1516716601.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:01.773Z,1516716601.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:02.129Z,1516716602.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:02.173Z,1516716602.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:02.544Z,1516716602.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:02.577Z,1516716602.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:02.943Z,1516716602.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:02.970Z,1516716602.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:03.339Z,1516716603.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:03.375Z,1516716603.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:03.729Z,1516716603.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:03.744Z,1516716603.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:04.128Z,1516716604.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:04.149Z,1516716604.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:04.548Z,1516716604.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:04.577Z,1516716604.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:04.943Z,1516716604.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:04.977Z,1516716604.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:05.348Z,1516716605.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:05.383Z,1516716605.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:05.738Z,1516716605.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:05.760Z,1516716605.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:06.134Z,1516716606.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:06.153Z,1516716606.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:06.552Z,1516716606.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:06.582Z,1516716606.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:06.943Z,1516716606.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:06.984Z,1516716606.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:07.340Z,1516716607.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:07.356Z,1516716607.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:07.735Z,1516716607.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:07.751Z,1516716607.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:08.134Z,1516716608.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:08.161Z,1516716608.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:08.540Z,1516716608.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:08.556Z,1516716608.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:08.942Z,1516716608.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:08.957Z,1516716608.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:09.343Z,1516716609.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:09.365Z,1516716609.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:09.741Z,1516716609.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:09.765Z,1516716609.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:10.136Z,1516716610.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:10.152Z,1516716610.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:10.536Z,1516716610.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:10.557Z,1516716610.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:10.933Z,1516716610.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:10.960Z,1516716610.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:11.340Z,1516716611.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:11.361Z,1516716611.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:11.747Z,1516716611.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:11.763Z,1516716611.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:12.144Z,1516716612.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:12.190Z,1516716612.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:12.551Z,1516716612.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:12.566Z,1516716612.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:12.929Z,1516716612.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:12.963Z,1516716612.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:13.328Z,1516716613.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:13.361Z,1516716613.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:13.729Z,1516716613.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:13.764Z,1516716613.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:14.132Z,1516716614.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:14.168Z,1516716614.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:14.553Z,1516716614.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:14.568Z,1516716614.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:14.948Z,1516716614.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:14.970Z,1516716614.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:15.339Z,1516716615.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:15.378Z,1516716615.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:15.729Z,1516716615.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:15.760Z,1516716615.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:16.134Z,1516716616.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:16.170Z,1516716616.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:16.529Z,1516716616.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:16.565Z,1516716616.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:16.940Z,1516716616.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:16.972Z,1516716616.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:17.352Z,1516716617.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:17.379Z,1516716617.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:17.753Z,1516716617.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:17.781Z,1516716617.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:18.132Z,1516716618.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:18.154Z,1516716618.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:18.536Z,1516716618.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:18.552Z,1516716618.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:18.935Z,1516716618.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:18.963Z,1516716618.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:19.335Z,1516716619.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:19.356Z,1516716619.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:19.740Z,1516716619.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:19.756Z,1516716619.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:20.144Z,1516716620.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:20.181Z,1516716620.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:20.544Z,1516716620.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:20.565Z,1516716620.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:20.943Z,1516716620.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:20.965Z,1516716620.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:21.336Z,1516716621.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:21.367Z,1516716621.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:21.742Z,1516716621.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:21.758Z,1516716621.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:22.136Z,1516716622.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:22.160Z,1516716622.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:22.532Z,1516716622.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:22.565Z,1516716622.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:22.953Z,1516716622.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:22.968Z,1516716622.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:23.352Z,1516716623.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:23.369Z,1516716623.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:23.746Z,1516716623.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:23.770Z,1516716623.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:24.132Z,1516716624.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:24.178Z,1516716624.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:24.531Z,1516716624.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:24.565Z,1516716624.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:24.929Z,1516716624.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:24.958Z,1516716624.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:25.328Z,1516716625.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:25.365Z,1516716625.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:25.752Z,1516716625.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:25.767Z,1516716625.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:26.151Z,1516716626.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:26.178Z,1516716626.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:26.553Z,1516716626.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:26.568Z,1516716626.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:26.928Z,1516716626.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:26.965Z,1516716626.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:27.329Z,1516716627.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:27.367Z,1516716627.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:27.729Z,1516716627.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:27.769Z,1516716627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:28.133Z,1516716628.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:28.164Z,1516716628.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:28.528Z,1516716628.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:28.543Z,1516716628.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:28.948Z,1516716628.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:28.974Z,1516716628.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:29.364Z,1516716629.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:29.379Z,1516716629.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:29.743Z,1516716629.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:29.779Z,1516716629.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:30.136Z,1516716630.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:30.153Z,1516716630.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:30.533Z,1516716630.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:30.549Z,1516716630.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:30.934Z,1516716630.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:30.949Z,1516716630.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:31.333Z,1516716631.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:31.356Z,1516716631.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:31.740Z,1516716631.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:31.755Z,1516716631.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:32.142Z,1516716632.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:32.157Z,1516716632.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:32.552Z,1516716632.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:32.582Z,1516716632.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:32.935Z,1516716632.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:32.951Z,1516716632.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:33.336Z,1516716633.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:33.351Z,1516716633.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:33.736Z,1516716633.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:33.751Z,1516716633.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:34.136Z,1516716634.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:34.151Z,1516716634.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:34.536Z,1516716634.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:34.553Z,1516716634.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:34.940Z,1516716634.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:34.955Z,1516716634.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:35.343Z,1516716635.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:35.381Z,1516716635.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:35.739Z,1516716635.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:35.760Z,1516716635.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:36.137Z,1516716636.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:36.153Z,1516716636.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:36.535Z,1516716636.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:36.551Z,1516716636.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:36.937Z,1516716636.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:36.953Z,1516716636.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:37.338Z,1516716637.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:37.361Z,1516716637.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:37.743Z,1516716637.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:37.759Z,1516716637.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:38.143Z,1516716638.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:38.158Z,1516716638.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:38.542Z,1516716638.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:38.557Z,1516716638.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:38.936Z,1516716638.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:38.952Z,1516716638.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:39.338Z,1516716639.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:39.360Z,1516716639.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:42.440Z,1516716642.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:42.456Z,1516716642.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:42.565Z,1516716642.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:42.595Z,1516716642.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:42.915Z,1516716642.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:42.949Z,1516716642.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:43.331Z,1516716643.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:43.346Z,1516716643.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:43.716Z,1516716643.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:43.745Z,1516716643.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:44.110Z,1516716644.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:44.141Z,1516716644.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:44.509Z,1516716644.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:44.524Z,1516716644.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:44.909Z,1516716644.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:44.925Z,1516716644.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:45.305Z,1516716645.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:45.328Z,1516716645.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:45.714Z,1516716645.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:45.730Z,1516716645.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:46.110Z,1516716646.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:46.133Z,1516716646.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:46.516Z,1516716646.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:46.530Z,1516716646.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:46.909Z,1516716646.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:46.924Z,1516716646.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:47.308Z,1516716647.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:47.322Z,1516716647.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:47.705Z,1516716647.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:47.728Z,1516716647.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:48.115Z,1516716648.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:48.130Z,1516716648.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:48.496Z,1516716648.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:48.537Z,1516716648.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:48.921Z,1516716648.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:48.936Z,1516716648.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:49.328Z,1516716649.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:49.349Z,1516716649.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:49.723Z,1516716649.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:49.738Z,1516716649.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:50.097Z,1516716650.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:50.129Z,1516716650.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:50.517Z,1516716650.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:50.537Z,1516716650.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:50.900Z,1516716650.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:50.927Z,1516716650.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:51.302Z,1516716651.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:51.332Z,1516716651.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:51.709Z,1516716651.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:51.740Z,1516716651.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:52.116Z,1516716652.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:52.150Z,1516716652.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:52.509Z,1516716652.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:52.545Z,1516716652.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:52.902Z,1516716652.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:52.932Z,1516716652.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:53.300Z,1516716653.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:53.337Z,1516716653.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:53.697Z,1516716653.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:53.708Z,1516716653.708 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T14:10:53.737Z,1516716653.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:54.101Z,1516716654.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:54.108Z,1516716654.108 [PNI_TCM](ERROR): CRC does not match. Expected:0x41247 got:0x16839 2018-01-23T14:10:54.140Z,1516716654.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:54.500Z,1516716654.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:54.532Z,1516716654.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:54.913Z,1516716654.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:54.944Z,1516716654.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:55.314Z,1516716655.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:55.346Z,1516716655.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:55.717Z,1516716655.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:55.746Z,1516716655.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:56.108Z,1516716656.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:56.140Z,1516716656.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:56.502Z,1516716656.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:56.549Z,1516716656.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:56.903Z,1516716656.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:56.935Z,1516716656.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:57.303Z,1516716657.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:57.352Z,1516716657.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:57.720Z,1516716657.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:57.749Z,1516716657.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:58.126Z,1516716658.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:58.152Z,1516716658.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:58.523Z,1516716658.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:58.550Z,1516716658.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:58.911Z,1516716658.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:58.926Z,1516716658.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:59.308Z,1516716659.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:59.324Z,1516716659.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:10:59.702Z,1516716659.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:10:59.743Z,1516716659.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:00.104Z,1516716660.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:00.123Z,1516716660.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:00.502Z,1516716660.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:00.533Z,1516716660.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:00.913Z,1516716660.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:00.928Z,1516716660.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:01.310Z,1516716661.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:01.337Z,1516716661.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:01.715Z,1516716661.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:01.732Z,1516716661.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:02.105Z,1516716662.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:02.122Z,1516716662.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:02.503Z,1516716662.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:02.534Z,1516716662.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:02.904Z,1516716662.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:02.941Z,1516716662.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:03.300Z,1516716663.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:03.326Z,1516716663.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:03.717Z,1516716663.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:03.736Z,1516716663.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:04.121Z,1516716664.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:04.136Z,1516716664.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:04.515Z,1516716664.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:04.562Z,1516716664.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:04.906Z,1516716664.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:04.930Z,1516716664.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:05.310Z,1516716665.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:05.328Z,1516716665.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:05.704Z,1516716665.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:05.734Z,1516716665.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:06.106Z,1516716666.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:06.142Z,1516716666.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:06.508Z,1516716666.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:06.531Z,1516716666.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:06.917Z,1516716666.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:06.933Z,1516716666.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:07.321Z,1516716667.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:07.344Z,1516716667.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:07.718Z,1516716667.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:07.759Z,1516716667.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:08.103Z,1516716668.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:08.127Z,1516716668.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:08.505Z,1516716668.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:08.524Z,1516716668.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:08.904Z,1516716668.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:08.930Z,1516716668.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:09.299Z,1516716669.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:09.333Z,1516716669.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:09.719Z,1516716669.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:09.737Z,1516716669.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:10.120Z,1516716670.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:10.136Z,1516716670.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:10.520Z,1516716670.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:10.541Z,1516716670.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:10.909Z,1516716670.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:10.938Z,1516716670.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:11.309Z,1516716671.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:11.331Z,1516716671.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:11.696Z,1516716671.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:11.735Z,1516716671.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:12.097Z,1516716672.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:12.128Z,1516716672.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:12.496Z,1516716672.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:12.537Z,1516716672.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:12.919Z,1516716672.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:12.937Z,1516716672.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:13.321Z,1516716673.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:13.338Z,1516716673.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:13.716Z,1516716673.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:13.736Z,1516716673.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:14.108Z,1516716674.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:14.161Z,1516716674.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:14.496Z,1516716674.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:14.529Z,1516716674.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:14.897Z,1516716674.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:14.933Z,1516716674.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:15.308Z,1516716675.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:15.330Z,1516716675.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:15.716Z,1516716675.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:15.731Z,1516716675.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:16.119Z,1516716676.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:16.135Z,1516716676.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:16.514Z,1516716676.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:16.534Z,1516716676.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:16.896Z,1516716676.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:16.944Z,1516716676.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:17.297Z,1516716677.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:17.333Z,1516716677.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:17.704Z,1516716677.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:17.730Z,1516716677.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:18.097Z,1516716678.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:18.138Z,1516716678.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:18.501Z,1516716678.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:18.541Z,1516716678.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:18.912Z,1516716678.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:18.938Z,1516716678.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:19.311Z,1516716679.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:19.343Z,1516716679.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:19.712Z,1516716679.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:19.742Z,1516716679.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:20.096Z,1516716680.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:20.133Z,1516716680.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:20.496Z,1516716680.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:20.511Z,1516716680.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:20.909Z,1516716680.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:20.941Z,1516716680.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:21.304Z,1516716681.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:21.325Z,1516716681.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:21.719Z,1516716681.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:21.751Z,1516716681.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:22.120Z,1516716682.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:22.151Z,1516716682.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:22.512Z,1516716682.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:22.526Z,1516716682.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:22.905Z,1516716682.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:22.920Z,1516716682.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:23.302Z,1516716683.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:23.326Z,1516716683.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:23.705Z,1516716683.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:23.721Z,1516716683.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:24.105Z,1516716684.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:24.120Z,1516716684.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:24.504Z,1516716684.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:24.519Z,1516716684.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:24.911Z,1516716684.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:24.926Z,1516716684.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:25.311Z,1516716685.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:25.326Z,1516716685.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:25.710Z,1516716685.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:25.733Z,1516716685.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:26.109Z,1516716686.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:26.129Z,1516716686.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:26.505Z,1516716686.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:26.520Z,1516716686.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:26.901Z,1516716686.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:26.924Z,1516716686.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:27.314Z,1516716687.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:27.329Z,1516716687.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:27.715Z,1516716687.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:27.730Z,1516716687.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:28.114Z,1516716688.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:28.129Z,1516716688.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:28.515Z,1516716688.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:28.530Z,1516716688.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:28.907Z,1516716688.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:28.922Z,1516716688.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:29.305Z,1516716689.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:29.321Z,1516716689.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:29.710Z,1516716689.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:29.749Z,1516716689.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:30.119Z,1516716690.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:30.134Z,1516716690.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:30.515Z,1516716690.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:30.537Z,1516716690.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:30.904Z,1516716690.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:30.925Z,1516716690.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:31.307Z,1516716691.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:31.322Z,1516716691.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:31.718Z,1516716691.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:31.734Z,1516716691.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:32.119Z,1516716692.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:32.141Z,1516716692.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:32.513Z,1516716692.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:32.532Z,1516716692.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:32.898Z,1516716692.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:32.934Z,1516716692.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:33.301Z,1516716693.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:33.333Z,1516716693.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:33.716Z,1516716693.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:33.737Z,1516716693.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:34.121Z,1516716694.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:34.136Z,1516716694.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:34.524Z,1516716694.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:34.538Z,1516716694.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:34.898Z,1516716694.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:34.929Z,1516716694.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:35.297Z,1516716695.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:35.325Z,1516716695.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:35.712Z,1516716695.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:35.735Z,1516716695.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:36.122Z,1516716696.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:36.137Z,1516716696.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:36.528Z,1516716696.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:36.589Z,1516716696.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:36.901Z,1516716696.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:36.940Z,1516716696.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:37.297Z,1516716697.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:37.332Z,1516716697.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:37.715Z,1516716697.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:37.736Z,1516716697.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:38.120Z,1516716698.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:38.135Z,1516716698.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:38.138Z,1516716698.138 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:06:37.8Z 2018-01-23T14:11:38.138Z,1516716698.138 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:11:38.139Z,1516716698.139 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:11:38.517Z,1516716698.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:38.533Z,1516716698.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:39.037Z,1516716699.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:39.057Z,1516716699.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:39.301Z,1516716699.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:39.340Z,1516716699.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:42.412Z,1516716702.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:42.453Z,1516716702.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:42.531Z,1516716702.531 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0256.lzma 2018-01-23T14:11:42.585Z,1516716702.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:42.602Z,1516716702.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:42.938Z,1516716702.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:42.984Z,1516716702.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:43.305Z,1516716703.305 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0256.lzma.bak 2018-01-23T14:11:43.306Z,1516716703.306 [DataOverHttps](INFO): SBD MOMSN=7755689 2018-01-23T14:11:43.344Z,1516716703.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:43.359Z,1516716703.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:43.983Z,1516716703.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:43.998Z,1516716703.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:44.132Z,1516716704.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:44.184Z,1516716704.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:47.240Z,1516716707.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:47.255Z,1516716707.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:47.372Z,1516716707.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:47.395Z,1516716707.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:47.744Z,1516716707.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:47.784Z,1516716707.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:48.137Z,1516716708.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:48.153Z,1516716708.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:48.528Z,1516716708.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:48.553Z,1516716708.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:48.926Z,1516716708.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:48.961Z,1516716708.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:52.027Z,1516716712.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:52.052Z,1516716712.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:52.138Z,1516716712.138 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0257.lzma 2018-01-23T14:11:52.173Z,1516716712.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:52.206Z,1516716712.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:52.514Z,1516716712.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:52.552Z,1516716712.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:52.873Z,1516716712.873 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0257.lzma.bak 2018-01-23T14:11:52.874Z,1516716712.874 [DataOverHttps](INFO): SBD MOMSN=7755691 2018-01-23T14:11:52.919Z,1516716712.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:52.945Z,1516716712.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:53.545Z,1516716713.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:53.569Z,1516716713.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:53.572Z,1516716713.572 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:11:53.572Z,1516716713.572 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:11:53.572Z,1516716713.572 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:11:53.693Z,1516716713.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:53.729Z,1516716713.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:56.798Z,1516716716.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:56.823Z,1516716716.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:56.925Z,1516716716.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:56.969Z,1516716716.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:57.277Z,1516716717.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:57.297Z,1516716717.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:57.691Z,1516716717.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:57.706Z,1516716717.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:58.077Z,1516716718.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:58.097Z,1516716718.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:58.472Z,1516716718.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:58.493Z,1516716718.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:58.873Z,1516716718.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:58.888Z,1516716718.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:59.269Z,1516716719.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:59.289Z,1516716719.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:11:59.675Z,1516716719.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:11:59.690Z,1516716719.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:00.078Z,1516716720.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:00.100Z,1516716720.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:00.478Z,1516716720.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:00.497Z,1516716720.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:00.878Z,1516716720.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:00.897Z,1516716720.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:01.276Z,1516716721.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:01.291Z,1516716721.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:01.674Z,1516716721.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:01.697Z,1516716721.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:02.072Z,1516716722.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:02.091Z,1516716722.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:02.473Z,1516716722.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:02.488Z,1516716722.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:02.878Z,1516716722.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:02.893Z,1516716722.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:03.279Z,1516716723.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:03.294Z,1516716723.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:03.691Z,1516716723.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:03.706Z,1516716723.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:04.070Z,1516716724.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:04.085Z,1516716724.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:04.476Z,1516716724.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:04.491Z,1516716724.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:04.874Z,1516716724.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:04.897Z,1516716724.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:05.272Z,1516716725.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:05.287Z,1516716725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:05.678Z,1516716725.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:05.697Z,1516716725.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:06.080Z,1516716726.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:06.095Z,1516716726.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:06.480Z,1516716726.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:06.495Z,1516716726.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:06.879Z,1516716726.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:06.894Z,1516716726.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:07.273Z,1516716727.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:07.289Z,1516716727.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:07.673Z,1516716727.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:07.694Z,1516716727.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:08.079Z,1516716728.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:08.095Z,1516716728.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:08.474Z,1516716728.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:08.490Z,1516716728.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:08.876Z,1516716728.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:08.901Z,1516716728.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:09.283Z,1516716729.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:09.299Z,1516716729.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:09.684Z,1516716729.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:09.699Z,1516716729.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:10.068Z,1516716730.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:10.101Z,1516716730.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:10.477Z,1516716730.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:10.492Z,1516716730.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:10.874Z,1516716730.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:10.890Z,1516716730.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:11.268Z,1516716731.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:11.299Z,1516716731.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:11.682Z,1516716731.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:11.697Z,1516716731.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:12.083Z,1516716732.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:12.098Z,1516716732.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:12.489Z,1516716732.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:12.505Z,1516716732.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:12.884Z,1516716732.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:12.899Z,1516716732.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:13.264Z,1516716733.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:13.299Z,1516716733.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:13.666Z,1516716733.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:13.694Z,1516716733.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:14.065Z,1516716734.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:14.100Z,1516716734.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:14.464Z,1516716734.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:14.493Z,1516716734.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:14.880Z,1516716734.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:14.907Z,1516716734.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:15.286Z,1516716735.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:15.309Z,1516716735.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:15.685Z,1516716735.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:15.712Z,1516716735.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:15.714Z,1516716735.714 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:15.714Z,1516716735.714 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 218 2018-01-23T14:12:15.714Z,1516716735.714 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:12:15.738Z,1516716735.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:12:16.062Z,1516716736.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:16.085Z,1516716736.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:16.111Z,1516716736.111 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:12:16.111Z,1516716736.111 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 218 2018-01-23T14:12:16.496Z,1516716736.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:16.573Z,1516716736.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:16.574Z,1516716736.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:12:16.596Z,1516716736.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:12:16.597Z,1516716736.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:12:16.864Z,1516716736.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:16.898Z,1516716736.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:17.263Z,1516716737.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:17.286Z,1516716737.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:17.684Z,1516716737.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:17.716Z,1516716737.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:18.079Z,1516716738.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:18.094Z,1516716738.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:18.483Z,1516716738.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:18.514Z,1516716738.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:18.879Z,1516716738.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:18.894Z,1516716738.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:19.273Z,1516716739.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:19.292Z,1516716739.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:19.666Z,1516716739.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:19.693Z,1516716739.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:20.069Z,1516716740.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:20.120Z,1516716740.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:20.473Z,1516716740.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:20.488Z,1516716740.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:20.877Z,1516716740.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:20.897Z,1516716740.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:21.279Z,1516716741.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:21.294Z,1516716741.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:21.695Z,1516716741.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:21.724Z,1516716741.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:21.725Z,1516716741.725 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 218 2018-01-23T14:12:21.725Z,1516716741.725 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:12:21.726Z,1516716741.726 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:21.727Z,1516716741.727 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 218 2018-01-23T14:12:21.727Z,1516716741.727 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:12:21.739Z,1516716741.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:12:21.739Z,1516716741.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:12:22.062Z,1516716742.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:22.088Z,1516716742.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:12:22.088Z,1516716742.088 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 218 2018-01-23T14:12:22.089Z,1516716742.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:12:22.089Z,1516716742.089 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 218 2018-01-23T14:12:22.472Z,1516716742.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:22.492Z,1516716742.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:12:22.492Z,1516716742.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:12:22.492Z,1516716742.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:12:22.493Z,1516716742.493 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:12:22.493Z,1516716742.493 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:12:22.494Z,1516716742.494 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:12:22.863Z,1516716742.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:22.899Z,1516716742.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:12:22.900Z,1516716742.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:23.263Z,1516716743.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:23.289Z,1516716743.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:12:23.290Z,1516716743.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:23.672Z,1516716743.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:23.694Z,1516716743.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:12:23.695Z,1516716743.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:24.084Z,1516716744.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:24.098Z,1516716744.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:12:24.099Z,1516716744.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:24.487Z,1516716744.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:24.501Z,1516716744.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:12:24.502Z,1516716744.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:24.880Z,1516716744.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:24.906Z,1516716744.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:12:24.907Z,1516716744.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:25.264Z,1516716745.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:25.291Z,1516716745.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:12:25.292Z,1516716745.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:25.666Z,1516716745.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:25.697Z,1516716745.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:12:25.698Z,1516716745.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:26.065Z,1516716746.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:26.096Z,1516716746.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:12:26.097Z,1516716746.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:26.464Z,1516716746.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:26.500Z,1516716746.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:12:26.500Z,1516716746.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:26.875Z,1516716746.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:26.906Z,1516716746.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:12:26.911Z,1516716746.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:27.283Z,1516716747.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:27.307Z,1516716747.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:12:27.308Z,1516716747.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:27.687Z,1516716747.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:27.716Z,1516716747.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:12:27.717Z,1516716747.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:28.065Z,1516716748.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:28.084Z,1516716748.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:12:28.085Z,1516716748.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:28.469Z,1516716748.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:28.484Z,1516716748.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:12:28.485Z,1516716748.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:28.873Z,1516716748.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:28.887Z,1516716748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:12:28.888Z,1516716748.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:29.273Z,1516716749.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:29.288Z,1516716749.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:12:29.289Z,1516716749.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:29.674Z,1516716749.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:29.697Z,1516716749.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:12:29.698Z,1516716749.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:30.078Z,1516716750.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:30.100Z,1516716750.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:12:30.101Z,1516716750.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:30.483Z,1516716750.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:30.498Z,1516716750.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:12:30.499Z,1516716750.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:30.882Z,1516716750.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:30.904Z,1516716750.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:12:30.905Z,1516716750.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:31.274Z,1516716751.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:31.288Z,1516716751.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:12:31.289Z,1516716751.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:31.676Z,1516716751.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:31.691Z,1516716751.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:12:31.692Z,1516716751.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:32.072Z,1516716752.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:32.090Z,1516716752.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:12:32.091Z,1516716752.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:32.468Z,1516716752.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:32.498Z,1516716752.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:12:32.499Z,1516716752.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:32.880Z,1516716752.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:32.900Z,1516716752.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:12:32.901Z,1516716752.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:33.288Z,1516716753.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:33.308Z,1516716753.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:12:33.309Z,1516716753.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:33.695Z,1516716753.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:33.710Z,1516716753.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:12:33.711Z,1516716753.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:34.062Z,1516716754.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:34.097Z,1516716754.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:12:34.098Z,1516716754.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:34.464Z,1516716754.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:34.500Z,1516716754.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:12:34.501Z,1516716754.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:34.869Z,1516716754.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:34.900Z,1516716754.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:12:34.901Z,1516716754.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:35.263Z,1516716755.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:35.286Z,1516716755.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:12:35.289Z,1516716755.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:35.668Z,1516716755.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:35.700Z,1516716755.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:12:35.701Z,1516716755.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:36.075Z,1516716756.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:36.114Z,1516716756.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:12:36.115Z,1516716756.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:36.487Z,1516716756.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:36.505Z,1516716756.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:12:36.506Z,1516716756.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:36.875Z,1516716756.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:36.912Z,1516716756.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:12:36.913Z,1516716756.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:37.269Z,1516716757.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:37.306Z,1516716757.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:12:37.307Z,1516716757.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:37.666Z,1516716757.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:37.681Z,1516716757.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:12:37.682Z,1516716757.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:38.065Z,1516716758.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:38.080Z,1516716758.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:12:38.081Z,1516716758.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:38.476Z,1516716758.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:38.514Z,1516716758.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:12:38.515Z,1516716758.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:38.879Z,1516716758.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:38.910Z,1516716758.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:12:38.911Z,1516716758.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:39.283Z,1516716759.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:39.314Z,1516716759.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:12:39.319Z,1516716759.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:39.687Z,1516716759.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:39.714Z,1516716759.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:12:39.719Z,1516716759.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:40.068Z,1516716760.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:40.090Z,1516716760.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:12:40.095Z,1516716760.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:40.473Z,1516716760.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:40.487Z,1516716760.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:12:40.488Z,1516716760.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:40.869Z,1516716760.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:40.888Z,1516716760.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:12:40.888Z,1516716760.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:41.274Z,1516716761.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:41.288Z,1516716761.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:12:41.289Z,1516716761.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:41.672Z,1516716761.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:41.690Z,1516716761.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:12:41.694Z,1516716761.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:42.088Z,1516716762.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:42.103Z,1516716762.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:42.486Z,1516716762.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:42.501Z,1516716762.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:42.887Z,1516716762.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:42.901Z,1516716762.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:43.265Z,1516716763.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:43.303Z,1516716763.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:43.682Z,1516716763.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:43.705Z,1516716763.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:44.066Z,1516716764.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:44.089Z,1516716764.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:44.465Z,1516716764.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:44.503Z,1516716764.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:44.885Z,1516716764.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:44.900Z,1516716764.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:45.295Z,1516716765.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:45.317Z,1516716765.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:45.734Z,1516716765.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:45.750Z,1516716765.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:46.065Z,1516716766.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:46.092Z,1516716766.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:46.467Z,1516716766.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:46.494Z,1516716766.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:46.866Z,1516716766.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:46.909Z,1516716766.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:47.265Z,1516716767.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:47.298Z,1516716767.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:47.673Z,1516716767.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:47.712Z,1516716767.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:48.094Z,1516716768.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:48.110Z,1516716768.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:48.486Z,1516716768.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:48.509Z,1516716768.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:48.894Z,1516716768.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:48.909Z,1516716768.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:49.265Z,1516716769.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:49.293Z,1516716769.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:49.673Z,1516716769.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:49.706Z,1516716769.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:50.065Z,1516716770.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:50.110Z,1516716770.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:50.464Z,1516716770.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:50.501Z,1516716770.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:50.876Z,1516716770.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:50.908Z,1516716770.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:51.284Z,1516716771.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:51.322Z,1516716771.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:51.684Z,1516716771.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:51.718Z,1516716771.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:52.070Z,1516716772.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:52.085Z,1516716772.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:52.469Z,1516716772.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:52.484Z,1516716772.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:52.869Z,1516716772.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:52.896Z,1516716772.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:53.274Z,1516716773.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:53.289Z,1516716773.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:53.674Z,1516716773.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:53.693Z,1516716773.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:54.076Z,1516716774.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:54.091Z,1516716774.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:57.191Z,1516716777.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:57.214Z,1516716777.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:57.323Z,1516716777.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:57.365Z,1516716777.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:57.673Z,1516716777.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:57.688Z,1516716777.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:58.073Z,1516716778.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:58.088Z,1516716778.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:58.468Z,1516716778.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:58.489Z,1516716778.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:58.874Z,1516716778.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:58.893Z,1516716778.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:59.274Z,1516716779.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:59.289Z,1516716779.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:12:59.675Z,1516716779.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:12:59.690Z,1516716779.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:00.061Z,1516716780.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:00.082Z,1516716780.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:00.465Z,1516716780.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:00.480Z,1516716780.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:00.864Z,1516716780.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:00.883Z,1516716780.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:01.261Z,1516716781.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:01.283Z,1516716781.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:01.669Z,1516716781.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:01.684Z,1516716781.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:02.072Z,1516716782.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:02.099Z,1516716782.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:02.478Z,1516716782.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:02.497Z,1516716782.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:02.875Z,1516716782.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:02.890Z,1516716782.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:03.265Z,1516716783.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:03.281Z,1516716783.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:03.661Z,1516716783.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:03.683Z,1516716783.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:04.066Z,1516716784.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:04.084Z,1516716784.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:04.464Z,1516716784.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:04.483Z,1516716784.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:04.874Z,1516716784.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:04.889Z,1516716784.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:05.278Z,1516716785.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:05.293Z,1516716785.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:05.674Z,1516716785.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:05.689Z,1516716785.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:06.061Z,1516716786.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:06.083Z,1516716786.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:06.465Z,1516716786.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:06.484Z,1516716786.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:06.854Z,1516716786.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:06.885Z,1516716786.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:07.269Z,1516716787.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:07.284Z,1516716787.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:07.657Z,1516716787.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:07.696Z,1516716787.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:08.073Z,1516716788.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:08.093Z,1516716788.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:08.478Z,1516716788.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:08.493Z,1516716788.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:08.875Z,1516716788.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:08.890Z,1516716788.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:09.257Z,1516716789.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:09.283Z,1516716789.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:09.657Z,1516716789.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:09.688Z,1516716789.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:10.057Z,1516716790.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:10.085Z,1516716790.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:10.469Z,1516716790.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:10.484Z,1516716790.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:10.882Z,1516716790.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:10.901Z,1516716790.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:11.282Z,1516716791.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:11.304Z,1516716791.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:11.672Z,1516716791.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:11.693Z,1516716791.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:12.057Z,1516716792.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:12.089Z,1516716792.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:12.461Z,1516716792.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:12.494Z,1516716792.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:12.867Z,1516716792.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:12.901Z,1516716792.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:13.279Z,1516716793.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:13.294Z,1516716793.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:13.675Z,1516716793.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:13.707Z,1516716793.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:14.061Z,1516716794.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:14.092Z,1516716794.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:14.456Z,1516716794.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:14.492Z,1516716794.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:14.867Z,1516716794.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:14.906Z,1516716794.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:15.267Z,1516716795.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:15.301Z,1516716795.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:15.679Z,1516716795.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:15.694Z,1516716795.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:16.058Z,1516716796.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:16.094Z,1516716796.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:16.457Z,1516716796.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:16.492Z,1516716796.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:16.867Z,1516716796.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:16.903Z,1516716796.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:17.279Z,1516716797.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:17.299Z,1516716797.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:17.676Z,1516716797.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:17.699Z,1516716797.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:18.057Z,1516716798.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:18.093Z,1516716798.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:18.457Z,1516716798.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:18.484Z,1516716798.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:18.867Z,1516716798.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:18.893Z,1516716798.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:19.271Z,1516716799.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:19.306Z,1516716799.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:19.671Z,1516716799.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:19.705Z,1516716799.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:20.058Z,1516716800.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:20.073Z,1516716800.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:20.461Z,1516716800.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:20.476Z,1516716800.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:20.875Z,1516716800.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:20.904Z,1516716800.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:21.276Z,1516716801.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:21.302Z,1516716801.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:21.676Z,1516716801.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:21.702Z,1516716801.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:22.066Z,1516716802.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:22.081Z,1516716802.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:22.462Z,1516716802.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:22.478Z,1516716802.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:22.872Z,1516716802.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:22.899Z,1516716802.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:23.276Z,1516716803.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:23.307Z,1516716803.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:23.671Z,1516716803.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:23.687Z,1516716803.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:24.064Z,1516716804.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:24.091Z,1516716804.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:24.467Z,1516716804.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:24.482Z,1516716804.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:24.872Z,1516716804.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:24.887Z,1516716804.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:25.272Z,1516716805.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:25.287Z,1516716805.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:25.672Z,1516716805.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:25.688Z,1516716805.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:26.062Z,1516716806.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:26.085Z,1516716806.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:26.465Z,1516716806.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:26.485Z,1516716806.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:26.872Z,1516716806.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:26.887Z,1516716806.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:27.272Z,1516716807.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:27.293Z,1516716807.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:27.675Z,1516716807.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:27.697Z,1516716807.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:28.066Z,1516716808.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:28.082Z,1516716808.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:28.460Z,1516716808.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:28.493Z,1516716808.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:28.875Z,1516716808.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:28.897Z,1516716808.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:29.278Z,1516716809.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:29.294Z,1516716809.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:29.674Z,1516716809.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:29.690Z,1516716809.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:30.073Z,1516716810.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:30.089Z,1516716810.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:30.465Z,1516716810.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:30.484Z,1516716810.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:30.875Z,1516716810.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:30.890Z,1516716810.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:31.279Z,1516716811.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:31.294Z,1516716811.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:31.679Z,1516716811.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:31.700Z,1516716811.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:32.069Z,1516716812.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:32.085Z,1516716812.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:32.456Z,1516716812.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:32.491Z,1516716812.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:32.876Z,1516716812.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:32.890Z,1516716812.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:33.279Z,1516716813.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:33.294Z,1516716813.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:33.672Z,1516716813.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:33.699Z,1516716813.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:34.057Z,1516716814.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:34.085Z,1516716814.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:34.461Z,1516716814.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:34.487Z,1516716814.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:34.872Z,1516716814.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:34.902Z,1516716814.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:35.279Z,1516716815.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:35.294Z,1516716815.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:35.675Z,1516716815.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:35.690Z,1516716815.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:36.057Z,1516716816.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:36.089Z,1516716816.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:36.457Z,1516716816.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:36.510Z,1516716816.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:36.878Z,1516716816.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:36.893Z,1516716816.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:37.278Z,1516716817.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:37.301Z,1516716817.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:37.676Z,1516716817.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:37.696Z,1516716817.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:38.061Z,1516716818.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:38.088Z,1516716818.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:38.456Z,1516716818.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:38.493Z,1516716818.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:38.877Z,1516716818.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:38.896Z,1516716818.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:39.279Z,1516716819.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:39.295Z,1516716819.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:39.667Z,1516716819.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:39.702Z,1516716819.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:40.065Z,1516716820.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:40.093Z,1516716820.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:40.461Z,1516716820.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:40.492Z,1516716820.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:40.867Z,1516716820.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:40.901Z,1516716820.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:41.280Z,1516716821.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:41.295Z,1516716821.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:41.667Z,1516716821.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:41.705Z,1516716821.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:42.065Z,1516716822.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:42.100Z,1516716822.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:42.456Z,1516716822.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:42.501Z,1516716822.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:42.871Z,1516716822.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:42.897Z,1516716822.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:43.271Z,1516716823.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:43.305Z,1516716823.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:43.685Z,1516716823.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:43.704Z,1516716823.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:44.061Z,1516716824.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:44.093Z,1516716824.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:44.457Z,1516716824.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:44.477Z,1516716824.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:44.875Z,1516716824.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:44.903Z,1516716824.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:45.279Z,1516716825.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:45.305Z,1516716825.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:45.675Z,1516716825.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:45.701Z,1516716825.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:46.065Z,1516716826.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:46.080Z,1516716826.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:46.465Z,1516716826.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:46.501Z,1516716826.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:46.875Z,1516716826.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:46.906Z,1516716826.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:47.279Z,1516716827.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:47.304Z,1516716827.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:47.671Z,1516716827.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:47.686Z,1516716827.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:48.066Z,1516716828.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:48.089Z,1516716828.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:48.465Z,1516716828.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:48.480Z,1516716828.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:48.867Z,1516716828.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:48.883Z,1516716828.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:49.271Z,1516716829.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:49.286Z,1516716829.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:49.682Z,1516716829.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:49.715Z,1516716829.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:50.066Z,1516716830.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:50.081Z,1516716830.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:50.463Z,1516716830.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:50.482Z,1516716830.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:50.879Z,1516716830.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:50.894Z,1516716830.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:51.277Z,1516716831.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:51.292Z,1516716831.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:51.672Z,1516716831.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:51.695Z,1516716831.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:52.069Z,1516716832.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:52.084Z,1516716832.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:52.470Z,1516716832.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:52.485Z,1516716832.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:52.856Z,1516716832.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:52.889Z,1516716832.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:53.276Z,1516716833.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:53.291Z,1516716833.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:53.678Z,1516716833.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:53.693Z,1516716833.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:54.072Z,1516716834.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:54.090Z,1516716834.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:54.457Z,1516716834.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:54.490Z,1516716834.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:57.569Z,1516716837.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:57.585Z,1516716837.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:57.688Z,1516716837.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:57.709Z,1516716837.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:58.044Z,1516716838.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:58.060Z,1516716838.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:58.456Z,1516716838.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:58.483Z,1516716838.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:58.847Z,1516716838.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:58.869Z,1516716838.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:59.248Z,1516716839.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:59.263Z,1516716839.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:13:59.647Z,1516716839.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:13:59.669Z,1516716839.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:00.042Z,1516716840.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:00.057Z,1516716840.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:00.437Z,1516716840.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:00.465Z,1516716840.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:00.851Z,1516716840.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:00.866Z,1516716840.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:01.252Z,1516716841.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:01.275Z,1516716841.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:01.656Z,1516716841.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:01.676Z,1516716841.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:02.058Z,1516716842.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:02.073Z,1516716842.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:02.450Z,1516716842.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:02.465Z,1516716842.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:02.832Z,1516716842.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:02.872Z,1516716842.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:03.233Z,1516716843.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:03.266Z,1516716843.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:03.636Z,1516716843.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:03.669Z,1516716843.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:04.060Z,1516716844.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:04.075Z,1516716844.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:04.456Z,1516716844.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:04.473Z,1516716844.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:04.851Z,1516716844.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:04.873Z,1516716844.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:05.232Z,1516716845.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:05.258Z,1516716845.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:05.636Z,1516716845.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:05.665Z,1516716845.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:06.036Z,1516716846.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:06.063Z,1516716846.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:06.433Z,1516716846.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:06.467Z,1516716846.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:06.832Z,1516716846.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:06.866Z,1516716846.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:07.252Z,1516716847.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:07.275Z,1516716847.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:07.662Z,1516716847.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:07.677Z,1516716847.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:08.060Z,1516716848.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:08.074Z,1516716848.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:08.433Z,1516716848.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:08.464Z,1516716848.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:08.835Z,1516716848.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:08.862Z,1516716848.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:09.241Z,1516716849.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:09.274Z,1516716849.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:09.636Z,1516716849.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:09.672Z,1516716849.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:10.043Z,1516716850.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:10.074Z,1516716850.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:10.455Z,1516716850.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:10.483Z,1516716850.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:10.851Z,1516716850.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:10.877Z,1516716850.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:11.244Z,1516716851.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:11.281Z,1516716851.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:11.636Z,1516716851.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:11.652Z,1516716851.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:12.042Z,1516716852.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:12.061Z,1516716852.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:12.445Z,1516716852.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:12.460Z,1516716852.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:12.845Z,1516716852.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:12.860Z,1516716852.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:13.244Z,1516716853.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:13.259Z,1516716853.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:13.648Z,1516716853.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:13.663Z,1516716853.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:14.058Z,1516716854.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:14.093Z,1516716854.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:14.441Z,1516716854.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:14.457Z,1516716854.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:14.840Z,1516716854.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:14.854Z,1516716854.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:15.244Z,1516716855.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:15.259Z,1516716855.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:15.638Z,1516716855.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:15.689Z,1516716855.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:16.059Z,1516716856.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:16.074Z,1516716856.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:16.451Z,1516716856.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:16.466Z,1516716856.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:16.852Z,1516716856.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:16.873Z,1516716856.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:17.246Z,1516716857.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:17.261Z,1516716857.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:17.645Z,1516716857.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:17.660Z,1516716857.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:18.036Z,1516716858.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:18.058Z,1516716858.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:18.437Z,1516716858.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:18.473Z,1516716858.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:18.847Z,1516716858.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:18.862Z,1516716858.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:19.258Z,1516716859.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:19.273Z,1516716859.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:19.658Z,1516716859.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:19.681Z,1516716859.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:20.055Z,1516716860.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:20.069Z,1516716860.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:20.443Z,1516716860.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:20.463Z,1516716860.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:20.852Z,1516716860.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:20.873Z,1516716860.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:21.246Z,1516716861.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:21.261Z,1516716861.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:21.633Z,1516716861.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:21.666Z,1516716861.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:22.047Z,1516716862.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:22.070Z,1516716862.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:22.455Z,1516716862.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:22.476Z,1516716862.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:22.859Z,1516716862.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:22.881Z,1516716862.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:23.232Z,1516716863.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:23.261Z,1516716863.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:23.635Z,1516716863.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:23.662Z,1516716863.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:24.036Z,1516716864.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:24.061Z,1516716864.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:24.453Z,1516716864.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:24.468Z,1516716864.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:24.832Z,1516716864.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:24.869Z,1516716864.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:25.257Z,1516716865.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:25.264Z,1516716865.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x19203 got:0x7106 2018-01-23T14:14:25.309Z,1516716865.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:25.656Z,1516716865.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:25.671Z,1516716865.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:26.055Z,1516716866.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:26.070Z,1516716866.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:26.433Z,1516716866.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:26.469Z,1516716866.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:26.842Z,1516716866.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:26.860Z,1516716866.860 [PNI_TCM](ERROR): CRC does not match. Expected:0x44413 got:0x64020 2018-01-23T14:14:26.889Z,1516716866.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:27.235Z,1516716867.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:27.265Z,1516716867.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:27.641Z,1516716867.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:27.667Z,1516716867.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:28.016Z,1516716868.016 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:14:28.016Z,1516716868.016 [NAL9602] Data Fault, FailCount= 5 2018-01-23T14:14:28.016Z,1516716868.016 [NAL9602](ERROR): Data Fault 2018-01-23T14:14:28.033Z,1516716868.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:28.081Z,1516716868.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:28.102Z,1516716868.102 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:14:28.107Z,1516716868.107 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T14:14:28.416Z,1516716868.416 [NAL9602](INFO): Powering down 2018-01-23T14:14:28.434Z,1516716868.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:28.453Z,1516716868.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:28.491Z,1516716868.491 [CBIT](INFO): Critical error at 20180123T141428 2018-01-23T14:14:28.843Z,1516716868.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:28.858Z,1516716868.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:29.240Z,1516716869.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:29.261Z,1516716869.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:29.634Z,1516716869.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:29.661Z,1516716869.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:30.039Z,1516716870.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:30.057Z,1516716870.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:30.440Z,1516716870.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:30.463Z,1516716870.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:30.840Z,1516716870.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:30.854Z,1516716870.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:30.867Z,1516716870.867 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:14:31.238Z,1516716871.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:31.285Z,1516716871.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:31.636Z,1516716871.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:31.665Z,1516716871.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:32.040Z,1516716872.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:32.054Z,1516716872.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:32.437Z,1516716872.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:32.460Z,1516716872.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:32.836Z,1516716872.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:32.869Z,1516716872.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:33.240Z,1516716873.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:33.258Z,1516716873.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:33.650Z,1516716873.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:33.670Z,1516716873.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:34.040Z,1516716874.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:34.067Z,1516716874.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:34.443Z,1516716874.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:34.469Z,1516716874.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:34.843Z,1516716874.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:34.861Z,1516716874.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:35.239Z,1516716875.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:35.262Z,1516716875.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:35.645Z,1516716875.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:35.660Z,1516716875.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:36.036Z,1516716876.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:36.065Z,1516716876.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:36.444Z,1516716876.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:36.462Z,1516716876.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:36.851Z,1516716876.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:36.866Z,1516716876.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:37.247Z,1516716877.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:37.263Z,1516716877.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:37.638Z,1516716877.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:37.686Z,1516716877.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:38.041Z,1516716878.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:38.065Z,1516716878.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:38.446Z,1516716878.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:38.469Z,1516716878.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:38.839Z,1516716878.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:38.883Z,1516716878.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:39.242Z,1516716879.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:39.277Z,1516716879.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:39.630Z,1516716879.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:39.662Z,1516716879.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:40.036Z,1516716880.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:40.072Z,1516716880.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:40.450Z,1516716880.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:40.465Z,1516716880.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:40.829Z,1516716880.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:40.875Z,1516716880.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:41.244Z,1516716881.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:41.264Z,1516716881.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:41.639Z,1516716881.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:41.664Z,1516716881.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:42.029Z,1516716882.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:42.062Z,1516716882.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:42.432Z,1516716882.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:42.478Z,1516716882.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:42.843Z,1516716882.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:42.862Z,1516716882.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:43.229Z,1516716883.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:43.264Z,1516716883.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:43.637Z,1516716883.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:43.666Z,1516716883.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:44.032Z,1516716884.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:44.064Z,1516716884.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:44.436Z,1516716884.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:44.465Z,1516716884.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:44.832Z,1516716884.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:44.868Z,1516716884.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:45.232Z,1516716885.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:45.267Z,1516716885.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:45.629Z,1516716885.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:45.656Z,1516716885.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:46.032Z,1516716886.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:46.068Z,1516716886.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:46.432Z,1516716886.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:46.462Z,1516716886.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:46.829Z,1516716886.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:46.868Z,1516716886.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:47.232Z,1516716887.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:47.263Z,1516716887.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:47.632Z,1516716887.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:47.671Z,1516716887.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:48.032Z,1516716888.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:48.047Z,1516716888.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:48.432Z,1516716888.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:48.450Z,1516716888.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:48.836Z,1516716888.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:48.850Z,1516716888.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:49.232Z,1516716889.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:49.247Z,1516716889.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:49.644Z,1516716889.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:49.679Z,1516716889.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:50.038Z,1516716890.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:50.057Z,1516716890.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:50.438Z,1516716890.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:50.453Z,1516716890.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:50.841Z,1516716890.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:50.855Z,1516716890.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:51.238Z,1516716891.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:51.253Z,1516716891.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:51.638Z,1516716891.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:51.658Z,1516716891.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:52.038Z,1516716892.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:52.053Z,1516716892.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:52.438Z,1516716892.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:52.453Z,1516716892.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:52.838Z,1516716892.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:52.853Z,1516716892.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:53.238Z,1516716893.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:53.256Z,1516716893.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:53.638Z,1516716893.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:53.653Z,1516716893.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:54.038Z,1516716894.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:54.053Z,1516716894.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:54.436Z,1516716894.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:54.464Z,1516716894.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:54.840Z,1516716894.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:54.857Z,1516716894.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:57.945Z,1516716897.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:57.960Z,1516716897.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:58.053Z,1516716898.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:58.100Z,1516716898.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:58.435Z,1516716898.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:58.468Z,1516716898.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:58.835Z,1516716898.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:58.850Z,1516716898.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:59.235Z,1516716899.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:59.250Z,1516716899.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:14:59.635Z,1516716899.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:14:59.650Z,1516716899.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:00.032Z,1516716900.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:00.047Z,1516716900.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:00.432Z,1516716900.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:00.453Z,1516716900.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:00.835Z,1516716900.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:00.856Z,1516716900.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:01.232Z,1516716901.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:01.247Z,1516716901.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:01.635Z,1516716901.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:01.651Z,1516716901.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:02.035Z,1516716902.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:02.049Z,1516716902.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:02.435Z,1516716902.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:02.450Z,1516716902.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:02.834Z,1516716902.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:02.853Z,1516716902.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:03.235Z,1516716903.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:03.256Z,1516716903.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:03.632Z,1516716903.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:03.698Z,1516716903.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:04.040Z,1516716904.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:04.055Z,1516716904.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:04.432Z,1516716904.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:04.453Z,1516716904.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:04.832Z,1516716904.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:04.847Z,1516716904.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:05.232Z,1516716905.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:05.253Z,1516716905.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:05.632Z,1516716905.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:05.653Z,1516716905.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:06.035Z,1516716906.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:06.050Z,1516716906.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:06.432Z,1516716906.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:06.453Z,1516716906.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:06.832Z,1516716906.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:06.853Z,1516716906.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:07.232Z,1516716907.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:07.247Z,1516716907.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:07.634Z,1516716907.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:07.657Z,1516716907.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:08.032Z,1516716908.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:08.054Z,1516716908.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:08.435Z,1516716908.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:08.456Z,1516716908.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:08.834Z,1516716908.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:08.857Z,1516716908.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:09.234Z,1516716909.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:09.254Z,1516716909.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:09.635Z,1516716909.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:09.650Z,1516716909.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:10.043Z,1516716910.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:10.058Z,1516716910.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:10.430Z,1516716910.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:10.463Z,1516716910.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:10.837Z,1516716910.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:10.852Z,1516716910.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:11.236Z,1516716911.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:11.257Z,1516716911.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:11.631Z,1516716911.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:11.664Z,1516716911.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:12.032Z,1516716912.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:12.063Z,1516716912.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:12.432Z,1516716912.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:12.455Z,1516716912.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:12.831Z,1516716912.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:12.863Z,1516716912.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:13.235Z,1516716913.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:13.250Z,1516716913.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:13.632Z,1516716913.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:13.654Z,1516716913.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:14.031Z,1516716914.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:14.054Z,1516716914.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:14.436Z,1516716914.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:14.457Z,1516716914.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:14.840Z,1516716914.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:14.855Z,1516716914.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:15.231Z,1516716915.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:15.264Z,1516716915.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:15.637Z,1516716915.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:15.656Z,1516716915.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:16.044Z,1516716916.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:16.065Z,1516716916.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:16.435Z,1516716916.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:16.455Z,1516716916.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:16.839Z,1516716916.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:16.860Z,1516716916.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:16.863Z,1516716916.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:16.863Z,1516716916.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 219 2018-01-23T14:15:16.863Z,1516716916.863 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:15:16.875Z,1516716916.875 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:15:17.226Z,1516716917.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:17.265Z,1516716917.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:17.278Z,1516716917.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:15:17.278Z,1516716917.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 219 2018-01-23T14:15:17.629Z,1516716917.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:17.656Z,1516716917.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:17.658Z,1516716917.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:15:17.658Z,1516716917.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:15:17.658Z,1516716917.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:15:18.028Z,1516716918.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:18.069Z,1516716918.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:18.429Z,1516716918.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:18.461Z,1516716918.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:18.829Z,1516716918.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:18.861Z,1516716918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:19.228Z,1516716919.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:19.262Z,1516716919.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:19.628Z,1516716919.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:19.656Z,1516716919.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:20.028Z,1516716920.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:20.063Z,1516716920.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:20.428Z,1516716920.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:20.442Z,1516716920.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:20.828Z,1516716920.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:20.843Z,1516716920.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:21.228Z,1516716921.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:21.243Z,1516716921.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:21.633Z,1516716921.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:21.648Z,1516716921.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:22.032Z,1516716922.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:22.047Z,1516716922.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:22.432Z,1516716922.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:22.456Z,1516716922.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:22.834Z,1516716922.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:22.849Z,1516716922.849 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:22.849Z,1516716922.849 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 219 2018-01-23T14:15:22.849Z,1516716922.849 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:15:22.851Z,1516716922.851 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:22.851Z,1516716922.851 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 219 2018-01-23T14:15:22.851Z,1516716922.851 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:15:22.893Z,1516716922.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:15:22.893Z,1516716922.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:15:23.234Z,1516716923.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:23.260Z,1516716923.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:15:23.260Z,1516716923.260 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 219 2018-01-23T14:15:23.261Z,1516716923.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:15:23.261Z,1516716923.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 219 2018-01-23T14:15:23.630Z,1516716923.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:23.652Z,1516716923.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:15:23.653Z,1516716923.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:15:23.653Z,1516716923.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:15:23.653Z,1516716923.653 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:15:23.654Z,1516716923.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:15:23.654Z,1516716923.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:15:24.035Z,1516716924.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:24.049Z,1516716924.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:15:24.050Z,1516716924.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:24.437Z,1516716924.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:24.451Z,1516716924.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:15:24.452Z,1516716924.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:24.830Z,1516716924.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:24.862Z,1516716924.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:15:24.863Z,1516716924.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:25.234Z,1516716925.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:25.256Z,1516716925.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:15:25.257Z,1516716925.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:25.635Z,1516716925.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:25.650Z,1516716925.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:15:25.651Z,1516716925.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:26.030Z,1516716926.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:26.062Z,1516716926.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:15:26.063Z,1516716926.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:26.443Z,1516716926.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:26.457Z,1516716926.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:15:26.458Z,1516716926.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:26.832Z,1516716926.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:26.847Z,1516716926.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:15:26.848Z,1516716926.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:27.230Z,1516716927.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:27.261Z,1516716927.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:15:27.263Z,1516716927.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:27.635Z,1516716927.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:27.650Z,1516716927.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:15:27.651Z,1516716927.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:28.033Z,1516716928.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:28.047Z,1516716928.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:15:28.048Z,1516716928.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:28.436Z,1516716928.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:28.458Z,1516716928.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:15:28.463Z,1516716928.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:28.835Z,1516716928.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:28.849Z,1516716928.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:15:28.850Z,1516716928.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:29.225Z,1516716929.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:29.256Z,1516716929.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:15:29.257Z,1516716929.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:29.628Z,1516716929.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:29.653Z,1516716929.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:15:29.654Z,1516716929.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:30.028Z,1516716930.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:30.062Z,1516716930.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:15:30.063Z,1516716930.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:30.428Z,1516716930.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:30.453Z,1516716930.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:15:30.454Z,1516716930.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:30.828Z,1516716930.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:30.860Z,1516716930.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:15:30.861Z,1516716930.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:31.228Z,1516716931.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:31.253Z,1516716931.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:15:31.254Z,1516716931.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:31.628Z,1516716931.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:31.653Z,1516716931.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:15:31.654Z,1516716931.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:32.028Z,1516716932.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:32.060Z,1516716932.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:15:32.061Z,1516716932.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:32.428Z,1516716932.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:32.453Z,1516716932.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:15:32.454Z,1516716932.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:32.828Z,1516716932.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:32.853Z,1516716932.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:15:32.854Z,1516716932.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:33.244Z,1516716933.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:33.258Z,1516716933.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:15:33.259Z,1516716933.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:33.628Z,1516716933.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:33.664Z,1516716933.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:15:33.665Z,1516716933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:34.025Z,1516716934.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:34.056Z,1516716934.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:15:34.057Z,1516716934.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:34.428Z,1516716934.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:34.460Z,1516716934.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:15:34.461Z,1516716934.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:34.828Z,1516716934.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:34.862Z,1516716934.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:15:34.863Z,1516716934.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:35.225Z,1516716935.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:35.252Z,1516716935.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:15:35.253Z,1516716935.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:35.628Z,1516716935.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:35.659Z,1516716935.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:15:35.660Z,1516716935.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:36.032Z,1516716936.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:36.065Z,1516716936.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:15:36.066Z,1516716936.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:36.429Z,1516716936.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:36.459Z,1516716936.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:15:36.460Z,1516716936.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:36.828Z,1516716936.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:36.842Z,1516716936.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:15:36.844Z,1516716936.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:37.228Z,1516716937.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:37.242Z,1516716937.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:15:37.243Z,1516716937.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:37.629Z,1516716937.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:37.644Z,1516716937.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:15:37.645Z,1516716937.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:38.040Z,1516716938.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:38.054Z,1516716938.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:15:38.056Z,1516716938.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:38.434Z,1516716938.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:38.448Z,1516716938.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:15:38.449Z,1516716938.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:38.832Z,1516716938.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:38.847Z,1516716938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:15:38.848Z,1516716938.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:39.232Z,1516716939.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:39.255Z,1516716939.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:15:39.256Z,1516716939.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:39.636Z,1516716939.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:39.651Z,1516716939.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:15:39.652Z,1516716939.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:40.032Z,1516716940.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:40.047Z,1516716940.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:15:40.048Z,1516716940.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:40.434Z,1516716940.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:40.449Z,1516716940.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:15:40.450Z,1516716940.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:40.834Z,1516716940.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:40.856Z,1516716940.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:15:40.857Z,1516716940.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:41.232Z,1516716941.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:41.247Z,1516716941.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:15:41.248Z,1516716941.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:41.632Z,1516716941.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:41.659Z,1516716941.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:15:41.660Z,1516716941.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:42.034Z,1516716942.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:42.048Z,1516716942.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:15:42.049Z,1516716942.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:42.434Z,1516716942.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:42.449Z,1516716942.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:15:42.450Z,1516716942.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:42.832Z,1516716942.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:42.855Z,1516716942.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:43.242Z,1516716943.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:43.257Z,1516716943.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:43.633Z,1516716943.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:43.648Z,1516716943.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:44.034Z,1516716944.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:44.065Z,1516716944.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:44.439Z,1516716944.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:44.454Z,1516716944.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:44.825Z,1516716944.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:44.853Z,1516716944.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:45.228Z,1516716945.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:45.254Z,1516716945.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:45.628Z,1516716945.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:45.664Z,1516716945.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:46.025Z,1516716946.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:46.056Z,1516716946.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:46.430Z,1516716946.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:46.461Z,1516716946.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:46.828Z,1516716946.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:46.861Z,1516716946.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:47.226Z,1516716947.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:47.249Z,1516716947.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:47.629Z,1516716947.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:47.656Z,1516716947.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:48.028Z,1516716948.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:48.043Z,1516716948.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:48.428Z,1516716948.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:48.443Z,1516716948.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:48.840Z,1516716948.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:48.876Z,1516716948.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:49.232Z,1516716949.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:49.247Z,1516716949.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:49.632Z,1516716949.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:49.648Z,1516716949.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:50.040Z,1516716950.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:50.056Z,1516716950.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:50.434Z,1516716950.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:50.449Z,1516716950.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:50.832Z,1516716950.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:50.847Z,1516716950.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:51.231Z,1516716951.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:51.255Z,1516716951.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:51.635Z,1516716951.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:51.650Z,1516716951.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:52.035Z,1516716952.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:52.050Z,1516716952.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:52.432Z,1516716952.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:52.459Z,1516716952.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:52.839Z,1516716952.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:52.853Z,1516716952.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:53.234Z,1516716953.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:53.249Z,1516716953.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:53.632Z,1516716953.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:53.654Z,1516716953.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:54.035Z,1516716954.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:54.050Z,1516716954.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:54.437Z,1516716954.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:54.452Z,1516716954.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:54.834Z,1516716954.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:54.857Z,1516716954.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:55.241Z,1516716955.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:55.256Z,1516716955.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:58.342Z,1516716958.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:58.396Z,1516716958.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:58.494Z,1516716958.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:58.534Z,1516716958.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:58.847Z,1516716958.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:58.866Z,1516716958.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:59.250Z,1516716959.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:59.265Z,1516716959.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:15:59.648Z,1516716959.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:15:59.663Z,1516716959.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:00.047Z,1516716960.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:00.062Z,1516716960.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:00.446Z,1516716960.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:00.463Z,1516716960.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:00.846Z,1516716960.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:00.865Z,1516716960.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:01.246Z,1516716961.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:01.261Z,1516716961.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:01.646Z,1516716961.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:01.663Z,1516716961.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:02.046Z,1516716962.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:02.069Z,1516716962.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:02.446Z,1516716962.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:02.464Z,1516716962.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:02.846Z,1516716962.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:02.861Z,1516716962.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:03.246Z,1516716963.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:03.269Z,1516716963.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:03.649Z,1516716963.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:03.668Z,1516716963.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:04.045Z,1516716964.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:04.060Z,1516716964.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:04.446Z,1516716964.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:04.461Z,1516716964.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:04.844Z,1516716964.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:04.871Z,1516716964.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:05.244Z,1516716965.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:05.260Z,1516716965.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:05.646Z,1516716965.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:05.661Z,1516716965.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:06.042Z,1516716966.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:06.072Z,1516716966.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:06.446Z,1516716966.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:06.461Z,1516716966.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:06.846Z,1516716966.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:06.868Z,1516716966.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:07.246Z,1516716967.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:07.260Z,1516716967.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:07.647Z,1516716967.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:07.662Z,1516716967.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:08.046Z,1516716968.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:08.061Z,1516716968.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:08.446Z,1516716968.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:08.468Z,1516716968.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:08.844Z,1516716968.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:08.860Z,1516716968.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:09.246Z,1516716969.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:09.269Z,1516716969.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:09.647Z,1516716969.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:09.662Z,1516716969.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:10.046Z,1516716970.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:10.061Z,1516716970.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:10.446Z,1516716970.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:10.469Z,1516716970.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:10.849Z,1516716970.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:10.868Z,1516716970.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:11.244Z,1516716971.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:11.260Z,1516716971.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:11.648Z,1516716971.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:11.674Z,1516716971.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:12.052Z,1516716972.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:12.077Z,1516716972.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:12.458Z,1516716972.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:12.473Z,1516716972.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:12.853Z,1516716972.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:12.868Z,1516716972.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:13.263Z,1516716973.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:13.312Z,1516716973.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:13.652Z,1516716973.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:13.683Z,1516716973.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:14.045Z,1516716974.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:14.080Z,1516716974.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:14.446Z,1516716974.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:14.518Z,1516716974.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:14.846Z,1516716974.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:14.882Z,1516716974.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:15.240Z,1516716975.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:15.255Z,1516716975.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:15.646Z,1516716975.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:15.692Z,1516716975.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:16.045Z,1516716976.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:16.076Z,1516716976.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:16.450Z,1516716976.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:16.465Z,1516716976.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:16.848Z,1516716976.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:16.863Z,1516716976.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:17.255Z,1516716977.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:17.294Z,1516716977.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:17.657Z,1516716977.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:17.715Z,1516716977.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:18.046Z,1516716978.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:18.118Z,1516716978.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:18.445Z,1516716978.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:18.497Z,1516716978.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:18.845Z,1516716978.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:18.893Z,1516716978.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:19.250Z,1516716979.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:19.337Z,1516716979.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:19.651Z,1516716979.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:19.703Z,1516716979.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:20.067Z,1516716980.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:20.150Z,1516716980.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:20.446Z,1516716980.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:20.471Z,1516716980.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:20.841Z,1516716980.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:20.897Z,1516716980.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:21.245Z,1516716981.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:21.265Z,1516716981.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:21.658Z,1516716981.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:21.733Z,1516716981.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:22.049Z,1516716982.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:22.073Z,1516716982.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:22.448Z,1516716982.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:22.477Z,1516716982.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:22.853Z,1516716982.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:22.872Z,1516716982.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:23.255Z,1516716983.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:23.299Z,1516716983.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:23.652Z,1516716983.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:23.703Z,1516716983.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:24.053Z,1516716984.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:24.077Z,1516716984.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:24.441Z,1516716984.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:24.481Z,1516716984.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:24.841Z,1516716984.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:24.877Z,1516716984.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:25.271Z,1516716985.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:25.294Z,1516716985.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:25.642Z,1516716985.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:25.685Z,1516716985.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:26.041Z,1516716986.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:26.081Z,1516716986.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:26.454Z,1516716986.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:26.488Z,1516716986.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:26.844Z,1516716986.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:26.889Z,1516716986.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:27.259Z,1516716987.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:27.274Z,1516716987.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:27.654Z,1516716987.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:27.673Z,1516716987.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:28.050Z,1516716988.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:28.069Z,1516716988.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:28.119Z,1516716988.119 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:16:28.120Z,1516716988.120 [NAL9602] No Fault, FailCount= 5 2018-01-23T14:16:28.424Z,1516716988.424 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:16:28.455Z,1516716988.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:28.483Z,1516716988.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:28.854Z,1516716988.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:28.885Z,1516716988.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:29.246Z,1516716989.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:29.282Z,1516716989.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:29.650Z,1516716989.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:29.704Z,1516716989.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:30.056Z,1516716990.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:30.081Z,1516716990.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:30.442Z,1516716990.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:30.481Z,1516716990.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:30.850Z,1516716990.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:30.865Z,1516716990.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:31.253Z,1516716991.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:31.269Z,1516716991.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:31.647Z,1516716991.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:31.663Z,1516716991.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:32.047Z,1516716992.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:32.062Z,1516716992.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:32.446Z,1516716992.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:32.470Z,1516716992.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:32.851Z,1516716992.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:32.866Z,1516716992.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:33.248Z,1516716993.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:33.263Z,1516716993.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:33.648Z,1516716993.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:33.665Z,1516716993.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:34.049Z,1516716994.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:34.064Z,1516716994.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:34.449Z,1516716994.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:34.465Z,1516716994.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:34.846Z,1516716994.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:34.873Z,1516716994.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:35.253Z,1516716995.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:35.268Z,1516716995.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:35.648Z,1516716995.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:35.671Z,1516716995.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:36.053Z,1516716996.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:36.068Z,1516716996.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:36.453Z,1516716996.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:36.468Z,1516716996.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:36.853Z,1516716996.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:36.868Z,1516716996.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:37.259Z,1516716997.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:37.274Z,1516716997.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:37.650Z,1516716997.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:37.665Z,1516716997.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:38.042Z,1516716998.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:38.057Z,1516716998.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:38.443Z,1516716998.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:38.458Z,1516716998.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:38.871Z,1516716998.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:38.889Z,1516716998.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:39.225Z,1516716999.225 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:16:39.244Z,1516716999.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:39.259Z,1516716999.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:39.642Z,1516716999.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:39.658Z,1516716999.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:40.053Z,1516717000.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:40.068Z,1516717000.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:40.457Z,1516717000.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:40.472Z,1516717000.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:40.896Z,1516717000.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:40.910Z,1516717000.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:41.242Z,1516717001.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:41.266Z,1516717001.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:41.643Z,1516717001.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:41.658Z,1516717001.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:42.042Z,1516717002.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:42.056Z,1516717002.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:42.455Z,1516717002.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:42.471Z,1516717002.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:42.856Z,1516717002.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:42.882Z,1516717002.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:43.256Z,1516717003.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:43.281Z,1516717003.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:43.641Z,1516717003.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:43.664Z,1516717003.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:44.040Z,1516717004.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:44.077Z,1516717004.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:44.445Z,1516717004.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:44.459Z,1516717004.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:44.848Z,1516717004.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:44.864Z,1516717004.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:45.255Z,1516717005.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:45.270Z,1516717005.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:45.658Z,1516717005.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:45.694Z,1516717005.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:46.055Z,1516717006.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:46.070Z,1516717006.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:46.447Z,1516717006.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:46.462Z,1516717006.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:46.847Z,1516717006.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:46.861Z,1516717006.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:47.248Z,1516717007.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:47.263Z,1516717007.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:47.648Z,1516717007.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:47.663Z,1516717007.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:48.047Z,1516717008.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:48.068Z,1516717008.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:48.451Z,1516717008.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:48.467Z,1516717008.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:48.855Z,1516717008.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:48.870Z,1516717008.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:49.251Z,1516717009.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:49.272Z,1516717009.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:49.650Z,1516717009.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:49.665Z,1516717009.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:50.048Z,1516717010.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:50.062Z,1516717010.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:50.448Z,1516717010.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:50.462Z,1516717010.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:50.849Z,1516717010.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:50.865Z,1516717010.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:51.251Z,1516717011.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:51.267Z,1516717011.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:51.655Z,1516717011.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:51.670Z,1516717011.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:52.062Z,1516717012.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:52.077Z,1516717012.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:52.448Z,1516717012.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:52.463Z,1516717012.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:52.852Z,1516717012.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:52.872Z,1516717012.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:53.249Z,1516717013.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:53.265Z,1516717013.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:53.648Z,1516717013.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:53.667Z,1516717013.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:54.048Z,1516717014.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:54.062Z,1516717014.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:54.065Z,1516717014.065 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:16:54.065Z,1516717014.065 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:16:54.065Z,1516717014.065 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:16:54.065Z,1516717014.065 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:16:54.454Z,1516717014.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:54.470Z,1516717014.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:54.473Z,1516717014.473 [Default:CheckIn:D] Stopped 2018-01-23T14:16:54.473Z,1516717014.473 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:16:54.855Z,1516717014.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:54.870Z,1516717014.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:54.873Z,1516717014.873 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 659.040234 min 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn:E] Stopped 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn] Stopped 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn](INFO): Running loop #65 2018-01-23T14:16:54.874Z,1516717014.874 [Default:CheckIn] Running Loop=65 2018-01-23T14:16:54.875Z,1516717014.875 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:16:54.875Z,1516717014.875 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:16:55.252Z,1516717015.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:55.286Z,1516717015.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:58.342Z,1516717018.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:58.358Z,1516717018.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:58.454Z,1516717018.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:58.495Z,1516717018.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:58.811Z,1516717018.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:58.826Z,1516717018.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:59.223Z,1516717019.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:59.256Z,1516717019.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:16:59.623Z,1516717019.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:16:59.654Z,1516717019.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:00.002Z,1516717020.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:00.029Z,1516717020.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:00.410Z,1516717020.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:00.425Z,1516717020.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:00.809Z,1516717020.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:00.824Z,1516717020.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:01.216Z,1516717021.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:01.243Z,1516717021.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:01.623Z,1516717021.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:01.645Z,1516717021.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:02.020Z,1516717022.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:02.039Z,1516717022.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:02.401Z,1516717022.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:02.428Z,1516717022.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:02.801Z,1516717022.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:02.839Z,1516717022.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:03.198Z,1516717023.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:03.226Z,1516717023.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:03.601Z,1516717023.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:03.633Z,1516717023.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:04.005Z,1516717024.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:04.034Z,1516717024.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:04.420Z,1516717024.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:04.435Z,1516717024.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:04.820Z,1516717024.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:04.847Z,1516717024.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:05.220Z,1516717025.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:05.241Z,1516717025.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:05.601Z,1516717025.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:05.624Z,1516717025.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:06.001Z,1516717026.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:06.028Z,1516717026.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:06.415Z,1516717026.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:06.443Z,1516717026.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:06.806Z,1516717026.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:06.821Z,1516717026.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:07.219Z,1516717027.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:07.246Z,1516717027.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:07.623Z,1516717027.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:07.657Z,1516717027.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:08.016Z,1516717028.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:08.046Z,1516717028.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:08.405Z,1516717028.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:08.421Z,1516717028.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:08.813Z,1516717028.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:08.849Z,1516717028.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:09.210Z,1516717029.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:09.225Z,1516717029.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:09.609Z,1516717029.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:09.625Z,1516717029.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:10.006Z,1516717030.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:10.033Z,1516717030.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:10.424Z,1516717030.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:10.455Z,1516717030.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:10.816Z,1516717030.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:10.831Z,1516717030.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:11.216Z,1516717031.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:11.231Z,1516717031.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:11.609Z,1516717031.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:11.624Z,1516717031.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:12.008Z,1516717032.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:12.031Z,1516717032.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:12.408Z,1516717032.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:12.430Z,1516717032.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:12.808Z,1516717032.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:12.828Z,1516717032.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:13.220Z,1516717033.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:13.235Z,1516717033.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:13.620Z,1516717033.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:13.635Z,1516717033.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:14.020Z,1516717034.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:14.034Z,1516717034.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:14.410Z,1516717034.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:14.430Z,1516717034.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:14.811Z,1516717034.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:14.831Z,1516717034.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:15.204Z,1516717035.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:15.237Z,1516717035.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:15.616Z,1516717035.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:15.631Z,1516717035.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:15.999Z,1516717035.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:16.040Z,1516717036.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:16.414Z,1516717036.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:16.442Z,1516717036.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:16.823Z,1516717036.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:16.845Z,1516717036.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:17.219Z,1516717037.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:17.253Z,1516717037.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:17.605Z,1516717037.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:17.631Z,1516717037.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:18.000Z,1516717038.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:18.037Z,1516717038.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:18.401Z,1516717038.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:18.437Z,1516717038.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:18.800Z,1516717038.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:18.833Z,1516717038.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:19.228Z,1516717039.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:19.242Z,1516717039.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:19.624Z,1516717039.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:19.638Z,1516717039.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:20.016Z,1516717040.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:20.038Z,1516717040.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:20.400Z,1516717040.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:20.436Z,1516717040.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:20.800Z,1516717040.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:20.838Z,1516717040.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:21.200Z,1516717041.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:21.233Z,1516717041.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:21.601Z,1516717041.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:21.637Z,1516717041.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:22.000Z,1516717042.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:22.038Z,1516717042.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:22.424Z,1516717042.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:22.439Z,1516717042.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:22.822Z,1516717042.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:22.849Z,1516717042.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:23.210Z,1516717043.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:23.236Z,1516717043.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:23.604Z,1516717043.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:23.637Z,1516717043.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:24.000Z,1516717044.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:24.033Z,1516717044.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:24.405Z,1516717044.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:24.438Z,1516717044.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:24.801Z,1516717044.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:24.836Z,1516717044.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:25.212Z,1516717045.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:25.245Z,1516717045.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:25.625Z,1516717045.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:25.640Z,1516717045.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:26.012Z,1516717046.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:26.049Z,1516717046.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:26.404Z,1516717046.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:26.441Z,1516717046.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:26.800Z,1516717046.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:26.844Z,1516717046.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:27.204Z,1516717047.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:27.240Z,1516717047.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:27.601Z,1516717047.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:27.616Z,1516717047.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:28.000Z,1516717048.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:28.015Z,1516717048.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:28.420Z,1516717048.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:28.445Z,1516717048.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:28.835Z,1516717048.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:28.850Z,1516717048.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:29.215Z,1516717049.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:29.250Z,1516717049.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:29.609Z,1516717049.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:29.645Z,1516717049.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:30.005Z,1516717050.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:30.020Z,1516717050.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:30.405Z,1516717050.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:30.420Z,1516717050.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:30.813Z,1516717050.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:30.849Z,1516717050.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:31.216Z,1516717051.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:31.231Z,1516717051.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:31.615Z,1516717051.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:31.630Z,1516717051.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:32.012Z,1516717052.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:32.027Z,1516717052.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:32.408Z,1516717052.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:32.422Z,1516717052.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:32.808Z,1516717052.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:32.828Z,1516717052.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:33.208Z,1516717053.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:33.223Z,1516717053.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:33.606Z,1516717053.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:33.621Z,1516717053.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:34.009Z,1516717054.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:34.024Z,1516717054.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:34.413Z,1516717054.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:34.433Z,1516717054.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:34.820Z,1516717054.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:34.834Z,1516717054.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:35.214Z,1516717055.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:35.229Z,1516717055.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:35.613Z,1516717055.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:35.633Z,1516717055.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:36.008Z,1516717056.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:36.023Z,1516717056.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:36.407Z,1516717056.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:36.438Z,1516717056.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:36.813Z,1516717056.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:36.828Z,1516717056.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:37.214Z,1516717057.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:37.233Z,1516717057.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:37.619Z,1516717057.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:37.634Z,1516717057.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:38.018Z,1516717058.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:38.033Z,1516717058.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:38.408Z,1516717058.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:38.428Z,1516717058.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:38.808Z,1516717058.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:38.833Z,1516717058.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:39.219Z,1516717059.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:39.234Z,1516717059.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:39.618Z,1516717059.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:39.633Z,1516717059.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:40.019Z,1516717060.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:40.034Z,1516717060.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:40.408Z,1516717060.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:40.428Z,1516717060.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:40.809Z,1516717060.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:40.824Z,1516717060.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:41.219Z,1516717061.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:41.234Z,1516717061.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:41.618Z,1516717061.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:41.633Z,1516717061.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:42.019Z,1516717062.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:42.033Z,1516717062.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:42.411Z,1516717062.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:42.426Z,1516717062.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:42.809Z,1516717062.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:42.824Z,1516717062.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:43.220Z,1516717063.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:43.235Z,1516717063.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:43.619Z,1516717063.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:43.634Z,1516717063.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:44.019Z,1516717064.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:44.034Z,1516717064.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:44.408Z,1516717064.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:44.428Z,1516717064.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:44.809Z,1516717064.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:44.825Z,1516717064.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:45.218Z,1516717065.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:45.234Z,1516717065.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:45.618Z,1516717065.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:45.633Z,1516717065.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:46.018Z,1516717066.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:46.034Z,1516717066.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:46.408Z,1516717066.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:46.427Z,1516717066.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:46.804Z,1516717066.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:46.835Z,1516717066.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:47.218Z,1516717067.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:47.233Z,1516717067.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:47.620Z,1516717067.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:47.635Z,1516717067.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:48.016Z,1516717068.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:48.035Z,1516717068.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:48.410Z,1516717068.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:48.425Z,1516717068.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:48.804Z,1516717068.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:48.827Z,1516717068.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:49.219Z,1516717069.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:49.234Z,1516717069.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:49.622Z,1516717069.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:49.637Z,1516717069.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:50.019Z,1516717070.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:50.034Z,1516717070.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:50.405Z,1516717070.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:50.428Z,1516717070.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:50.810Z,1516717070.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:50.825Z,1516717070.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:51.219Z,1516717071.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:51.234Z,1516717071.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:51.623Z,1516717071.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:51.646Z,1516717071.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:52.021Z,1516717072.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:52.048Z,1516717072.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:52.402Z,1516717072.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:52.429Z,1516717072.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:52.809Z,1516717072.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:52.845Z,1516717072.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:53.218Z,1516717073.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:53.248Z,1516717073.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:53.620Z,1516717073.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:53.653Z,1516717073.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:54.013Z,1516717074.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:54.052Z,1516717074.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:54.411Z,1516717074.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:54.426Z,1516717074.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:54.801Z,1516717074.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:54.818Z,1516717074.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:55.225Z,1516717075.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:55.250Z,1516717075.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:55.629Z,1516717075.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:55.656Z,1516717075.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:58.724Z,1516717078.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:58.746Z,1516717078.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:58.849Z,1516717078.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:58.865Z,1516717078.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:59.200Z,1516717079.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:59.221Z,1516717079.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:17:59.609Z,1516717079.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:17:59.624Z,1516717079.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:00.005Z,1516717080.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:00.021Z,1516717080.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:00.405Z,1516717080.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:00.421Z,1516717080.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:00.806Z,1516717080.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:00.821Z,1516717080.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:01.208Z,1516717081.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:01.223Z,1516717081.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:01.605Z,1516717081.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:01.621Z,1516717081.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:02.002Z,1516717082.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:02.016Z,1516717082.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:02.400Z,1516717082.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:02.419Z,1516717082.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:02.798Z,1516717082.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:02.829Z,1516717082.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:03.211Z,1516717083.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:03.226Z,1516717083.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:03.611Z,1516717083.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:03.633Z,1516717083.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:04.010Z,1516717084.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:04.029Z,1516717084.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:04.404Z,1516717084.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:04.419Z,1516717084.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:04.804Z,1516717084.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:04.821Z,1516717084.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:05.224Z,1516717085.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:05.238Z,1516717085.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:05.614Z,1516717085.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:05.629Z,1516717085.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:06.014Z,1516717086.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:06.037Z,1516717086.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:06.410Z,1516717086.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:06.425Z,1516717086.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:06.811Z,1516717086.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:06.829Z,1516717086.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:07.211Z,1516717087.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:07.233Z,1516717087.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:07.616Z,1516717087.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:07.631Z,1516717087.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:08.013Z,1516717088.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:08.039Z,1516717088.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:08.410Z,1516717088.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:08.425Z,1516717088.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:08.792Z,1516717088.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:08.818Z,1516717088.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:09.212Z,1516717089.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:09.233Z,1516717089.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:09.615Z,1516717089.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:09.637Z,1516717089.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:10.019Z,1516717090.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:10.034Z,1516717090.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:10.396Z,1516717090.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:10.424Z,1516717090.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:10.794Z,1516717090.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:10.821Z,1516717090.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:11.194Z,1516717091.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:11.233Z,1516717091.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:11.620Z,1516717091.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:11.635Z,1516717091.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:12.019Z,1516717092.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:12.034Z,1516717092.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:12.409Z,1516717092.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:12.436Z,1516717092.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:12.799Z,1516717092.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:12.827Z,1516717092.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:13.200Z,1516717093.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:13.227Z,1516717093.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:13.613Z,1516717093.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:13.628Z,1516717093.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:13.993Z,1516717093.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:14.030Z,1516717094.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:14.416Z,1516717094.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:14.437Z,1516717094.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:14.813Z,1516717094.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:14.834Z,1516717094.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:15.220Z,1516717095.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:15.234Z,1516717095.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:15.593Z,1516717095.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:15.625Z,1516717095.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:16.012Z,1516717096.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:16.020Z,1516717096.020 [PNI_TCM](ERROR): CRC does not match. Expected:0x8714 got:0x64775 2018-01-23T14:18:16.045Z,1516717096.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:16.399Z,1516717096.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:16.426Z,1516717096.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:16.801Z,1516717096.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:16.828Z,1516717096.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:17.192Z,1516717097.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:17.225Z,1516717097.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:17.609Z,1516717097.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:17.626Z,1516717097.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x59078 got:0x7106 2018-01-23T14:18:17.666Z,1516717097.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:17.669Z,1516717097.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:17.669Z,1516717097.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 220 2018-01-23T14:18:17.669Z,1516717097.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:18:17.680Z,1516717097.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:18:18.015Z,1516717098.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:18.037Z,1516717098.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:18.049Z,1516717098.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:18:18.049Z,1516717098.049 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 220 2018-01-23T14:18:18.423Z,1516717098.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:18.438Z,1516717098.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:18.439Z,1516717098.439 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:18:18.440Z,1516717098.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:18:18.440Z,1516717098.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:18:18.792Z,1516717098.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:18.828Z,1516717098.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:19.199Z,1516717099.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:19.218Z,1516717099.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x53695 got:0x17281 2018-01-23T14:18:19.244Z,1516717099.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:19.600Z,1516717099.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:19.626Z,1516717099.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:19.998Z,1516717099.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:20.034Z,1516717100.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:20.415Z,1516717100.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:20.437Z,1516717100.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:20.813Z,1516717100.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:20.840Z,1516717100.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:21.217Z,1516717101.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:21.232Z,1516717101.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:21.599Z,1516717101.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:21.627Z,1516717101.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:21.992Z,1516717101.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:22.036Z,1516717102.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:22.392Z,1516717102.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:22.430Z,1516717102.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:22.796Z,1516717102.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:22.831Z,1516717102.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:23.194Z,1516717103.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:23.237Z,1516717103.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:23.613Z,1516717103.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:23.641Z,1516717103.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:24.023Z,1516717104.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:24.045Z,1516717104.045 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:24.045Z,1516717104.045 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 220 2018-01-23T14:18:24.045Z,1516717104.045 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:18:24.047Z,1516717104.047 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:24.047Z,1516717104.047 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 220 2018-01-23T14:18:24.047Z,1516717104.047 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:18:24.060Z,1516717104.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:18:24.060Z,1516717104.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:18:24.415Z,1516717104.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:24.458Z,1516717104.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:18:24.458Z,1516717104.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 220 2018-01-23T14:18:24.459Z,1516717104.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:18:24.459Z,1516717104.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 220 2018-01-23T14:18:24.805Z,1516717104.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:24.843Z,1516717104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:18:24.844Z,1516717104.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:18:24.844Z,1516717104.844 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:18:24.845Z,1516717104.845 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:18:24.845Z,1516717104.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:18:24.845Z,1516717104.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:18:25.204Z,1516717105.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:25.241Z,1516717105.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:18:25.242Z,1516717105.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:25.607Z,1516717105.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:25.616Z,1516717105.616 [PNI_TCM](ERROR): CRC does not match. Expected:0x61523 got:0x59695 2018-01-23T14:18:25.638Z,1516717105.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:18:25.639Z,1516717105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:26.007Z,1516717106.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:26.043Z,1516717106.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:18:26.044Z,1516717106.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:26.418Z,1516717106.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:26.442Z,1516717106.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:18:26.443Z,1516717106.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:26.828Z,1516717106.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:26.842Z,1516717106.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:18:26.843Z,1516717106.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:27.217Z,1516717107.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:27.248Z,1516717107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:18:27.249Z,1516717107.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:27.603Z,1516717107.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:27.638Z,1516717107.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:18:27.640Z,1516717107.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:28.006Z,1516717108.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:28.037Z,1516717108.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:18:28.038Z,1516717108.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:28.399Z,1516717108.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:28.443Z,1516717108.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:18:28.444Z,1516717108.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:28.801Z,1516717108.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:28.820Z,1516717108.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:18:28.820Z,1516717108.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:29.201Z,1516717109.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:29.217Z,1516717109.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:18:29.218Z,1516717109.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:29.608Z,1516717109.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:29.623Z,1516717109.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:18:29.624Z,1516717109.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:30.007Z,1516717110.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:30.048Z,1516717110.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:18:30.049Z,1516717110.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:30.403Z,1516717110.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:30.421Z,1516717110.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:18:30.422Z,1516717110.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:30.804Z,1516717110.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:30.820Z,1516717110.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:18:30.821Z,1516717110.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:31.203Z,1516717111.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:31.225Z,1516717111.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:18:31.226Z,1516717111.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:31.611Z,1516717111.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:31.657Z,1516717111.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:18:31.658Z,1516717111.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:32.004Z,1516717112.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:32.023Z,1516717112.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:18:32.024Z,1516717112.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:32.414Z,1516717112.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:32.429Z,1516717112.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:18:32.430Z,1516717112.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:32.818Z,1516717112.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:32.833Z,1516717112.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:18:32.834Z,1516717112.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:33.213Z,1516717113.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:33.237Z,1516717113.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:18:33.238Z,1516717113.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:33.596Z,1516717113.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:33.630Z,1516717113.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:18:33.635Z,1516717113.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:33.992Z,1516717113.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:34.033Z,1516717114.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:18:34.033Z,1516717114.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:34.398Z,1516717114.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:34.430Z,1516717114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:18:34.431Z,1516717114.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:34.793Z,1516717114.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:34.821Z,1516717114.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:18:34.822Z,1516717114.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:35.192Z,1516717115.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:35.235Z,1516717115.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:18:35.236Z,1516717115.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:35.619Z,1516717115.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:35.636Z,1516717115.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:18:35.636Z,1516717115.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:36.006Z,1516717116.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:36.041Z,1516717116.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:18:36.042Z,1516717116.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:36.411Z,1516717116.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:36.456Z,1516717116.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:18:36.457Z,1516717116.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:36.800Z,1516717116.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:36.836Z,1516717116.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:18:36.837Z,1516717116.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:37.193Z,1516717117.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:37.208Z,1516717117.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:18:37.209Z,1516717117.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:37.608Z,1516717117.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:37.641Z,1516717117.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:18:37.642Z,1516717117.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:37.996Z,1516717117.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:38.041Z,1516717118.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:18:38.042Z,1516717118.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:38.407Z,1516717118.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:38.442Z,1516717118.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:18:38.447Z,1516717118.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:38.812Z,1516717118.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:38.841Z,1516717118.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:18:38.842Z,1516717118.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:39.217Z,1516717119.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:39.243Z,1516717119.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:18:39.244Z,1516717119.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:39.600Z,1516717119.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:39.645Z,1516717119.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:18:39.646Z,1516717119.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:40.004Z,1516717120.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:40.041Z,1516717120.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:18:40.042Z,1516717120.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:40.400Z,1516717120.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:40.416Z,1516717120.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:18:40.418Z,1516717120.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:40.799Z,1516717120.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:40.817Z,1516717120.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:18:40.819Z,1516717120.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:41.198Z,1516717121.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:41.221Z,1516717121.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:18:41.222Z,1516717121.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:41.603Z,1516717121.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:41.618Z,1516717121.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:18:41.619Z,1516717121.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:42.003Z,1516717122.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:42.020Z,1516717122.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:18:42.022Z,1516717122.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:42.403Z,1516717122.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:42.421Z,1516717122.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:18:42.422Z,1516717122.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:42.801Z,1516717122.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:42.815Z,1516717122.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:18:42.816Z,1516717122.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:43.196Z,1516717123.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:43.218Z,1516717123.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:18:43.223Z,1516717123.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:43.604Z,1516717123.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:43.620Z,1516717123.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:18:43.622Z,1516717123.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:44.001Z,1516717124.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:44.020Z,1516717124.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:18:44.021Z,1516717124.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:44.405Z,1516717124.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:44.425Z,1516717124.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:44.807Z,1516717124.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:44.822Z,1516717124.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:45.206Z,1516717125.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:45.222Z,1516717125.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:45.604Z,1516717125.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:45.624Z,1516717125.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:45.997Z,1516717125.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:46.018Z,1516717126.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:46.401Z,1516717126.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:46.415Z,1516717126.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:46.802Z,1516717126.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:46.817Z,1516717126.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:47.200Z,1516717127.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:47.217Z,1516717127.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:47.606Z,1516717127.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:47.621Z,1516717127.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:48.007Z,1516717128.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:48.022Z,1516717128.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:48.406Z,1516717128.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:48.425Z,1516717128.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:48.801Z,1516717128.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:48.817Z,1516717128.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:49.196Z,1516717129.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:49.216Z,1516717129.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:49.597Z,1516717129.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:49.619Z,1516717129.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:50.001Z,1516717130.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:50.020Z,1516717130.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:50.406Z,1516717130.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:50.435Z,1516717130.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:50.814Z,1516717130.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:50.833Z,1516717130.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:51.212Z,1516717131.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:51.226Z,1516717131.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:51.596Z,1516717131.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:51.618Z,1516717131.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:51.995Z,1516717131.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:52.018Z,1516717132.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:52.402Z,1516717132.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:52.424Z,1516717132.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:52.800Z,1516717132.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:52.827Z,1516717132.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:53.203Z,1516717133.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:53.225Z,1516717133.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:53.612Z,1516717133.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:53.629Z,1516717133.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:54.014Z,1516717134.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:54.029Z,1516717134.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:54.411Z,1516717134.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:54.426Z,1516717134.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:54.792Z,1516717134.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:54.828Z,1516717134.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:55.190Z,1516717135.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:55.221Z,1516717135.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:55.596Z,1516717135.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:55.622Z,1516717135.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:55.993Z,1516717135.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:56.032Z,1516717136.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:59.105Z,1516717139.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:59.125Z,1516717139.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:59.231Z,1516717139.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:59.273Z,1516717139.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:59.584Z,1516717139.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:59.611Z,1516717139.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:18:59.979Z,1516717139.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:18:59.994Z,1516717139.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:00.376Z,1516717140.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:00.391Z,1516717140.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:00.774Z,1516717140.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:00.797Z,1516717140.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:01.177Z,1516717141.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:01.192Z,1516717141.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:01.582Z,1516717141.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:01.601Z,1516717141.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:01.985Z,1516717141.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:02.005Z,1516717142.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:02.387Z,1516717142.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:02.401Z,1516717142.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:02.777Z,1516717142.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:02.792Z,1516717142.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:03.172Z,1516717143.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:03.190Z,1516717143.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:03.578Z,1516717143.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:03.593Z,1516717143.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:03.972Z,1516717143.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:03.994Z,1516717143.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:04.390Z,1516717144.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:04.413Z,1516717144.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:04.795Z,1516717144.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:04.809Z,1516717144.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:05.191Z,1516717145.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:05.206Z,1516717145.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:05.585Z,1516717145.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:05.605Z,1516717145.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:05.969Z,1516717145.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:06.006Z,1516717146.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:06.369Z,1516717146.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:06.408Z,1516717146.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:06.770Z,1516717146.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:06.801Z,1516717146.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:07.168Z,1516717147.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:07.204Z,1516717147.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:07.597Z,1516717147.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:07.617Z,1516717147.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:07.000Z,1516717148.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:08.021Z,1516717148.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:08.388Z,1516717148.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:08.418Z,1516717148.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:08.799Z,1516717148.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:08.814Z,1516717148.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:09.168Z,1516717149.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:09.202Z,1516717149.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:09.569Z,1516717149.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:09.609Z,1516717149.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:09.966Z,1516717149.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:09.989Z,1516717149.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:10.379Z,1516717150.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:10.414Z,1516717150.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:10.792Z,1516717150.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:10.807Z,1516717150.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:11.179Z,1516717151.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:11.213Z,1516717151.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:11.568Z,1516717151.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:11.604Z,1516717151.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:11.968Z,1516717151.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:12.006Z,1516717152.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:12.366Z,1516717152.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:12.381Z,1516717152.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:12.769Z,1516717152.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:12.784Z,1516717152.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:13.168Z,1516717153.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:13.188Z,1516717153.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:13.583Z,1516717153.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:13.609Z,1516717153.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:13.000Z,1516717154.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:14.015Z,1516717154.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:14.379Z,1516717154.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:14.418Z,1516717154.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:14.769Z,1516717154.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:14.789Z,1516717154.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:15.177Z,1516717155.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:15.213Z,1516717155.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:15.577Z,1516717155.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:15.592Z,1516717155.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:15.972Z,1516717155.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:15.991Z,1516717155.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:16.383Z,1516717156.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:16.398Z,1516717156.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:16.791Z,1516717156.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:16.826Z,1516717156.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:17.180Z,1516717157.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:17.194Z,1516717157.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:17.574Z,1516717157.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:17.593Z,1516717157.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:17.977Z,1516717157.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:17.992Z,1516717157.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:18.372Z,1516717158.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:18.397Z,1516717158.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:18.771Z,1516717158.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:18.803Z,1516717158.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:19.177Z,1516717159.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:19.192Z,1516717159.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:19.587Z,1516717159.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:19.602Z,1516717159.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:19.991Z,1516717159.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:20.012Z,1516717160.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:20.386Z,1516717160.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:20.415Z,1516717160.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:20.768Z,1516717160.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:20.805Z,1516717160.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:21.172Z,1516717161.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:21.204Z,1516717161.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:21.569Z,1516717161.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:21.606Z,1516717161.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:21.966Z,1516717161.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:21.981Z,1516717161.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:22.379Z,1516717162.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:22.405Z,1516717162.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:22.783Z,1516717162.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:22.813Z,1516717162.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:23.179Z,1516717163.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:23.205Z,1516717163.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:23.569Z,1516717163.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:23.584Z,1516717163.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:23.976Z,1516717163.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:24.017Z,1516717164.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:24.379Z,1516717164.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:24.411Z,1516717164.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:24.805Z,1516717164.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:24.820Z,1516717164.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:25.183Z,1516717165.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:25.220Z,1516717165.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:25.577Z,1516717165.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:25.592Z,1516717165.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:25.976Z,1516717165.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:25.999Z,1516717165.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:26.387Z,1516717166.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:26.402Z,1516717166.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:26.786Z,1516717166.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:26.805Z,1516717166.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:27.186Z,1516717167.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:27.205Z,1516717167.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:27.578Z,1516717167.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:27.593Z,1516717167.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:27.972Z,1516717167.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:27.992Z,1516717167.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:28.387Z,1516717168.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:28.402Z,1516717168.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:28.786Z,1516717168.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:28.808Z,1516717168.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:29.187Z,1516717169.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:29.201Z,1516717169.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:29.576Z,1516717169.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:29.595Z,1516717169.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:29.977Z,1516717169.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:29.992Z,1516717169.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:30.383Z,1516717170.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:30.411Z,1516717170.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:30.791Z,1516717170.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:30.806Z,1516717170.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:31.186Z,1516717171.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:31.214Z,1516717171.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:31.581Z,1516717171.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:31.596Z,1516717171.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:31.968Z,1516717171.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:32.000Z,1516717172.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:32.388Z,1516717172.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:32.402Z,1516717172.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:32.791Z,1516717172.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:32.806Z,1516717172.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:33.184Z,1516717173.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:33.207Z,1516717173.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:33.569Z,1516717173.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:33.608Z,1516717173.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:33.966Z,1516717173.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:33.994Z,1516717173.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:34.387Z,1516717174.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:34.406Z,1516717174.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:34.792Z,1516717174.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:34.807Z,1516717174.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:35.184Z,1516717175.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:35.206Z,1516717175.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:35.573Z,1516717175.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:35.608Z,1516717175.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:35.969Z,1516717175.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:35.000Z,1516717176.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:36.379Z,1516717176.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:36.420Z,1516717176.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:36.796Z,1516717176.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:36.811Z,1516717176.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:37.180Z,1516717177.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:37.214Z,1516717177.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:37.569Z,1516717177.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:37.585Z,1516717177.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:37.972Z,1516717177.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:38.009Z,1516717178.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:38.387Z,1516717178.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:38.415Z,1516717178.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:38.784Z,1516717178.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:38.819Z,1516717178.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:39.192Z,1516717179.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:39.214Z,1516717179.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:39.573Z,1516717179.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:39.605Z,1516717179.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:39.979Z,1516717179.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:39.994Z,1516717179.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:40.383Z,1516717180.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:40.398Z,1516717180.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:40.791Z,1516717180.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:40.806Z,1516717180.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:41.180Z,1516717181.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:41.194Z,1516717181.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:41.574Z,1516717181.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:41.603Z,1516717181.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:41.978Z,1516717181.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:41.993Z,1516717181.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:42.379Z,1516717182.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:42.395Z,1516717182.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:42.783Z,1516717182.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:42.798Z,1516717182.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:43.183Z,1516717183.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:43.204Z,1516717183.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:43.581Z,1516717183.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:43.601Z,1516717183.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:43.983Z,1516717183.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:43.998Z,1516717183.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:44.385Z,1516717184.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:44.400Z,1516717184.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:44.784Z,1516717184.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:44.799Z,1516717184.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:45.183Z,1516717185.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:45.198Z,1516717185.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:45.579Z,1516717185.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:45.594Z,1516717185.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:45.972Z,1516717185.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:46.001Z,1516717186.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:46.392Z,1516717186.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:46.413Z,1516717186.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:46.793Z,1516717186.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:46.808Z,1516717186.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:47.184Z,1516717187.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:47.213Z,1516717187.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:47.573Z,1516717187.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:47.601Z,1516717187.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:47.968Z,1516717187.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:47.998Z,1516717187.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:48.386Z,1516717188.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:48.412Z,1516717188.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:48.791Z,1516717188.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:48.808Z,1516717188.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:49.182Z,1516717189.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:49.215Z,1516717189.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:49.569Z,1516717189.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:49.601Z,1516717189.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:49.967Z,1516717189.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:49.993Z,1516717189.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:50.386Z,1516717190.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:50.410Z,1516717190.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:50.791Z,1516717190.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:50.806Z,1516717190.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:51.187Z,1516717191.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:51.202Z,1516717191.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:51.569Z,1516717191.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:51.608Z,1516717191.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:51.966Z,1516717191.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:51.989Z,1516717191.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:52.391Z,1516717192.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:52.406Z,1516717192.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:52.792Z,1516717192.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:52.806Z,1516717192.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:53.187Z,1516717193.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:53.202Z,1516717193.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:53.569Z,1516717193.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:53.601Z,1516717193.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:53.968Z,1516717193.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:54.002Z,1516717194.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:54.387Z,1516717194.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:54.406Z,1516717194.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:54.789Z,1516717194.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:54.818Z,1516717194.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:55.191Z,1516717195.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:55.205Z,1516717195.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:55.569Z,1516717195.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:55.604Z,1516717195.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:55.969Z,1516717195.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:56.001Z,1516717196.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:56.389Z,1516717196.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:56.411Z,1516717196.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:59.484Z,1516717199.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:59.499Z,1516717199.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:59.619Z,1516717199.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:59.653Z,1516717199.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:19:59.948Z,1516717199.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:19:59.962Z,1516717199.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:00.356Z,1516717200.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:00.371Z,1516717200.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:00.750Z,1516717200.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:00.765Z,1516717200.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:01.147Z,1516717201.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:01.166Z,1516717201.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:01.559Z,1516717201.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:01.580Z,1516717201.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:01.958Z,1516717201.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:01.974Z,1516717201.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:02.359Z,1516717202.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:02.380Z,1516717202.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:02.749Z,1516717202.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:02.764Z,1516717202.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:03.138Z,1516717203.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:03.165Z,1516717203.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:03.540Z,1516717203.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:03.577Z,1516717203.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:03.941Z,1516717203.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:03.972Z,1516717203.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:04.338Z,1516717204.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:04.373Z,1516717204.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:04.754Z,1516717204.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:04.786Z,1516717204.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:05.163Z,1516717205.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:05.178Z,1516717205.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:05.559Z,1516717205.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:05.574Z,1516717205.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:05.940Z,1516717205.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:05.966Z,1516717205.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:06.341Z,1516717206.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:06.376Z,1516717206.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:06.742Z,1516717206.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:06.773Z,1516717206.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:07.140Z,1516717207.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:07.173Z,1516717207.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:07.558Z,1516717207.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:07.582Z,1516717207.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:07.964Z,1516717207.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:07.978Z,1516717207.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:08.355Z,1516717208.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:08.377Z,1516717208.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:08.741Z,1516717208.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:08.777Z,1516717208.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:09.138Z,1516717209.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:09.173Z,1516717209.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:09.540Z,1516717209.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:09.573Z,1516717209.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:09.941Z,1516717209.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:09.980Z,1516717209.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:10.339Z,1516717210.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:10.362Z,1516717210.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:10.759Z,1516717210.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:10.781Z,1516717210.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:11.164Z,1516717211.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:11.179Z,1516717211.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:11.556Z,1516717211.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:11.578Z,1516717211.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:11.940Z,1516717211.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:11.973Z,1516717211.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:12.345Z,1516717212.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:12.378Z,1516717212.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:12.742Z,1516717212.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:12.773Z,1516717212.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:13.145Z,1516717213.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:13.181Z,1516717213.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:13.551Z,1516717213.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:13.586Z,1516717213.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:13.963Z,1516717213.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:13.993Z,1516717213.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:14.363Z,1516717214.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:14.393Z,1516717214.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:14.747Z,1516717214.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:14.761Z,1516717214.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:15.145Z,1516717215.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:15.165Z,1516717215.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:15.546Z,1516717215.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:15.565Z,1516717215.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:15.949Z,1516717215.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:15.964Z,1516717215.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:16.345Z,1516717216.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:16.375Z,1516717216.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:16.764Z,1516717216.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:16.795Z,1516717216.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:17.155Z,1516717217.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:17.199Z,1516717217.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:17.560Z,1516717217.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:17.575Z,1516717217.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:17.949Z,1516717217.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:17.964Z,1516717217.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:18.349Z,1516717218.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:18.381Z,1516717218.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:18.756Z,1516717218.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:18.771Z,1516717218.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:19.145Z,1516717219.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:19.168Z,1516717219.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:19.563Z,1516717219.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:19.578Z,1516717219.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:19.962Z,1516717219.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:19.995Z,1516717219.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:20.364Z,1516717220.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:20.385Z,1516717220.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:20.756Z,1516717220.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:20.771Z,1516717220.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:21.138Z,1516717221.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:21.171Z,1516717221.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:21.540Z,1516717221.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:21.573Z,1516717221.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:21.941Z,1516717221.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:21.971Z,1516717221.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:22.341Z,1516717222.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:22.370Z,1516717222.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:22.757Z,1516717222.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:22.785Z,1516717222.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:23.164Z,1516717223.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:23.180Z,1516717223.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:23.558Z,1516717223.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:23.582Z,1516717223.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:23.940Z,1516717223.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:23.966Z,1516717223.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:24.340Z,1516717224.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:24.377Z,1516717224.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:24.745Z,1516717224.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:24.772Z,1516717224.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:25.140Z,1516717225.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:25.172Z,1516717225.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:25.564Z,1516717225.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:25.579Z,1516717225.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:25.967Z,1516717225.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:25.982Z,1516717225.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:26.358Z,1516717226.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:26.381Z,1516717226.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:26.740Z,1516717226.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:26.773Z,1516717226.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:27.138Z,1516717227.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:27.166Z,1516717227.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:27.543Z,1516717227.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:27.569Z,1516717227.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:27.941Z,1516717227.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:27.978Z,1516717227.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:28.338Z,1516717228.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:28.361Z,1516717228.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:28.751Z,1516717228.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:28.785Z,1516717228.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:29.168Z,1516717229.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:29.183Z,1516717229.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:29.564Z,1516717229.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:29.578Z,1516717229.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:29.940Z,1516717229.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:29.977Z,1516717229.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:30.348Z,1516717230.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:30.380Z,1516717230.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:30.745Z,1516717230.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:30.776Z,1516717230.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:31.141Z,1516717231.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:31.177Z,1516717231.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:31.551Z,1516717231.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:31.586Z,1516717231.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:31.951Z,1516717231.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:31.985Z,1516717231.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:32.351Z,1516717232.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:32.390Z,1516717232.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:32.740Z,1516717232.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:32.781Z,1516717232.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:33.138Z,1516717233.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:33.153Z,1516717233.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:33.544Z,1516717233.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:33.581Z,1516717233.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:33.941Z,1516717233.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:33.985Z,1516717233.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:34.338Z,1516717234.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:34.353Z,1516717234.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:34.751Z,1516717234.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:34.778Z,1516717234.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:35.159Z,1516717235.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:35.184Z,1516717235.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:35.559Z,1516717235.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:35.582Z,1516717235.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:35.952Z,1516717235.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:35.987Z,1516717235.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:36.345Z,1516717236.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:36.364Z,1516717236.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:36.745Z,1516717236.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:36.765Z,1516717236.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:37.147Z,1516717237.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:37.162Z,1516717237.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:37.554Z,1516717237.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:37.569Z,1516717237.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:37.959Z,1516717237.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:37.974Z,1516717237.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:38.363Z,1516717238.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:38.378Z,1516717238.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:38.753Z,1516717238.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:38.768Z,1516717238.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:39.148Z,1516717239.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:39.163Z,1516717239.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:39.548Z,1516717239.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:39.563Z,1516717239.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:39.944Z,1516717239.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:39.976Z,1516717239.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:40.348Z,1516717240.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:40.363Z,1516717240.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:40.753Z,1516717240.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:40.773Z,1516717240.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:41.155Z,1516717241.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:41.177Z,1516717241.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:41.556Z,1516717241.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:41.571Z,1516717241.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:41.948Z,1516717241.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:41.969Z,1516717241.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:42.345Z,1516717242.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:42.368Z,1516717242.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:42.745Z,1516717242.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:42.767Z,1516717242.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:43.148Z,1516717243.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:43.163Z,1516717243.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:43.554Z,1516717243.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:43.570Z,1516717243.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:43.955Z,1516717243.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:43.970Z,1516717243.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:44.354Z,1516717244.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:44.373Z,1516717244.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:44.753Z,1516717244.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:44.768Z,1516717244.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:45.148Z,1516717245.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:45.163Z,1516717245.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:45.548Z,1516717245.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:45.563Z,1516717245.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:45.948Z,1516717245.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:45.971Z,1516717245.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:46.344Z,1516717246.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:46.365Z,1516717246.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:46.754Z,1516717246.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:46.781Z,1516717246.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:47.163Z,1516717247.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:47.178Z,1516717247.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:47.559Z,1516717247.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:47.574Z,1516717247.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:47.944Z,1516717247.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:47.966Z,1516717247.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:48.345Z,1516717248.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:48.377Z,1516717248.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:48.753Z,1516717248.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:48.768Z,1516717248.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:49.140Z,1516717249.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:49.173Z,1516717249.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:49.563Z,1516717249.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:49.579Z,1516717249.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:49.963Z,1516717249.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:49.978Z,1516717249.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:50.360Z,1516717250.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:50.375Z,1516717250.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:50.741Z,1516717250.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:50.779Z,1516717250.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:51.152Z,1516717251.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:51.171Z,1516717251.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:51.540Z,1516717251.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:51.567Z,1516717251.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:51.959Z,1516717251.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:51.974Z,1516717251.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:52.341Z,1516717252.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:52.364Z,1516717252.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:52.756Z,1516717252.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:52.779Z,1516717252.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:53.160Z,1516717253.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:53.184Z,1516717253.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:53.556Z,1516717253.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:53.579Z,1516717253.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:53.940Z,1516717253.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:53.978Z,1516717253.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:54.341Z,1516717254.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:54.380Z,1516717254.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:54.741Z,1516717254.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:54.773Z,1516717254.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:55.140Z,1516717255.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:55.179Z,1516717255.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:55.564Z,1516717255.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:55.585Z,1516717255.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:55.963Z,1516717255.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:55.983Z,1516717255.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:56.351Z,1516717256.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:56.388Z,1516717256.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:56.743Z,1516717256.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:56.779Z,1516717256.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:59.840Z,1516717259.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:20:59.881Z,1516717259.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:20:59.958Z,1516717259.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:00.001Z,1516717260.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:00.347Z,1516717260.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:00.381Z,1516717260.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:00.747Z,1516717260.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:00.770Z,1516717260.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:01.135Z,1516717261.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:01.150Z,1516717261.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:01.530Z,1516717261.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:01.545Z,1516717261.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:01.933Z,1516717261.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:01.948Z,1516717261.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:02.331Z,1516717262.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:02.355Z,1516717262.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:02.735Z,1516717262.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:02.750Z,1516717262.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:03.139Z,1516717263.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:03.154Z,1516717263.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:03.535Z,1516717263.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:03.550Z,1516717263.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:03.932Z,1516717263.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:03.946Z,1516717263.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:04.333Z,1516717264.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:04.349Z,1516717264.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:04.729Z,1516717264.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:04.750Z,1516717264.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:05.130Z,1516717265.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:05.157Z,1516717265.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:05.538Z,1516717265.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:05.554Z,1516717265.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:05.939Z,1516717265.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:05.954Z,1516717265.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:06.337Z,1516717266.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:06.356Z,1516717266.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:06.734Z,1516717266.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:06.749Z,1516717266.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:07.128Z,1516717267.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:07.146Z,1516717267.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:07.543Z,1516717267.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:07.558Z,1516717267.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:07.946Z,1516717267.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:07.961Z,1516717267.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:08.342Z,1516717268.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:08.357Z,1516717268.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:08.733Z,1516717268.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:08.752Z,1516717268.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:09.131Z,1516717269.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:09.152Z,1516717269.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:09.542Z,1516717269.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:09.557Z,1516717269.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:09.945Z,1516717269.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:09.964Z,1516717269.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:10.344Z,1516717270.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:10.359Z,1516717270.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:10.729Z,1516717270.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:10.751Z,1516717270.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:11.132Z,1516717271.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:11.147Z,1516717271.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:11.544Z,1516717271.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:11.559Z,1516717271.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:11.946Z,1516717271.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:11.965Z,1516717271.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:12.343Z,1516717272.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:12.358Z,1516717272.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:12.734Z,1516717272.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:12.749Z,1516717272.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:13.131Z,1516717273.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:13.146Z,1516717273.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:13.543Z,1516717273.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:13.558Z,1516717273.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:13.946Z,1516717273.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:13.961Z,1516717273.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:14.342Z,1516717274.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:14.357Z,1516717274.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:14.733Z,1516717274.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:14.747Z,1516717274.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:15.132Z,1516717275.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:15.147Z,1516717275.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:15.542Z,1516717275.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:15.557Z,1516717275.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:15.945Z,1516717275.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:15.964Z,1516717275.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:16.347Z,1516717276.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:16.362Z,1516717276.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:16.733Z,1516717276.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:16.748Z,1516717276.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:17.133Z,1516717277.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:17.152Z,1516717277.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:17.543Z,1516717277.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:17.558Z,1516717277.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:17.946Z,1516717277.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:17.965Z,1516717277.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:18.346Z,1516717278.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:18.360Z,1516717278.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:18.729Z,1516717278.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:18.758Z,1516717278.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:18.760Z,1516717278.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:18.761Z,1516717278.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 221 2018-01-23T14:21:18.761Z,1516717278.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:21:18.773Z,1516717278.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:21:19.140Z,1516717279.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:19.161Z,1516717279.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:19.173Z,1516717279.173 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:21:19.173Z,1516717279.173 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 221 2018-01-23T14:21:19.542Z,1516717279.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:19.557Z,1516717279.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:19.558Z,1516717279.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:21:19.559Z,1516717279.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:21:19.559Z,1516717279.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:21:19.944Z,1516717279.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:19.967Z,1516717279.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:20.342Z,1516717280.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:20.357Z,1516717280.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:20.725Z,1516717280.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:20.751Z,1516717280.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:21.137Z,1516717281.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:21.152Z,1516717281.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:21.540Z,1516717281.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:21.572Z,1516717281.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:21.946Z,1516717281.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:21.961Z,1516717281.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:22.345Z,1516717282.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:22.360Z,1516717282.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:22.725Z,1516717282.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:22.751Z,1516717282.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:23.124Z,1516717283.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:23.159Z,1516717283.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:23.548Z,1516717283.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:23.563Z,1516717283.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:23.947Z,1516717283.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:23.962Z,1516717283.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:24.343Z,1516717284.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:24.357Z,1516717284.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:24.726Z,1516717284.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:24.756Z,1516717284.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:25.124Z,1516717285.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:25.150Z,1516717285.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:25.150Z,1516717285.150 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 221 2018-01-23T14:21:25.150Z,1516717285.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:21:25.152Z,1516717285.152 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:25.152Z,1516717285.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 221 2018-01-23T14:21:25.152Z,1516717285.152 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:21:25.165Z,1516717285.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:21:25.165Z,1516717285.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:21:25.542Z,1516717285.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:25.576Z,1516717285.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:21:25.576Z,1516717285.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 221 2018-01-23T14:21:25.576Z,1516717285.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:21:25.576Z,1516717285.576 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 221 2018-01-23T14:21:25.948Z,1516717285.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:25.962Z,1516717285.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:21:25.962Z,1516717285.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:21:25.963Z,1516717285.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:21:25.963Z,1516717285.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:21:25.964Z,1516717285.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:21:25.964Z,1516717285.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:21:26.347Z,1516717286.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:26.362Z,1516717286.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:21:26.363Z,1516717286.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:26.725Z,1516717286.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:26.756Z,1516717286.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:21:26.757Z,1516717286.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:27.129Z,1516717287.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:27.155Z,1516717287.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:21:27.156Z,1516717287.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:27.543Z,1516717287.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:27.558Z,1516717287.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:21:27.559Z,1516717287.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:27.951Z,1516717287.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:27.965Z,1516717287.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:21:27.966Z,1516717287.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:28.344Z,1516717288.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:28.362Z,1516717288.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:21:28.364Z,1516717288.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:28.746Z,1516717288.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:28.760Z,1516717288.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:21:28.761Z,1516717288.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:29.125Z,1516717289.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:29.157Z,1516717289.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:21:29.158Z,1516717289.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:29.552Z,1516717289.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:29.567Z,1516717289.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:21:29.568Z,1516717289.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:29.949Z,1516717289.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:29.976Z,1516717289.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:21:29.977Z,1516717289.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:30.348Z,1516717290.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:30.368Z,1516717290.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:21:30.369Z,1516717290.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:30.730Z,1516717290.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:30.765Z,1516717290.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:21:30.766Z,1516717290.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:31.137Z,1516717291.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:31.163Z,1516717291.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:21:31.164Z,1516717291.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:31.536Z,1516717291.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:31.569Z,1516717291.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:21:31.570Z,1516717291.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:31.944Z,1516717291.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:31.966Z,1516717291.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:21:31.967Z,1516717291.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:32.336Z,1516717292.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:32.372Z,1516717292.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:21:32.373Z,1516717292.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:32.733Z,1516717292.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:32.766Z,1516717292.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:21:32.767Z,1516717292.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:33.129Z,1516717293.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:33.167Z,1516717293.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:21:33.168Z,1516717293.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:33.552Z,1516717293.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:33.567Z,1516717293.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:21:33.568Z,1516717293.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:33.939Z,1516717293.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:33.980Z,1516717293.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:21:33.981Z,1516717293.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:34.336Z,1516717294.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:34.362Z,1516717294.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:21:34.368Z,1516717294.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:34.735Z,1516717294.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:34.765Z,1516717294.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:21:34.766Z,1516717294.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:35.130Z,1516717295.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:35.145Z,1516717295.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:21:35.146Z,1516717295.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:35.548Z,1516717295.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:35.572Z,1516717295.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:21:35.572Z,1516717295.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:35.944Z,1516717295.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:35.970Z,1516717295.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:21:35.975Z,1516717295.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:36.349Z,1516717296.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:36.380Z,1516717296.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:21:36.381Z,1516717296.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:36.734Z,1516717296.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:36.750Z,1516717296.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:21:36.751Z,1516717296.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:37.132Z,1516717297.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:37.147Z,1516717297.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:21:37.148Z,1516717297.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:37.539Z,1516717297.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:37.555Z,1516717297.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:21:37.556Z,1516717297.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:37.953Z,1516717297.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:37.983Z,1516717297.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:21:37.984Z,1516717297.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:38.344Z,1516717298.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:38.359Z,1516717298.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:21:38.360Z,1516717298.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:38.733Z,1516717298.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:38.747Z,1516717298.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:21:38.748Z,1516717298.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:39.130Z,1516717299.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:39.153Z,1516717299.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:21:39.154Z,1516717299.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:39.546Z,1516717299.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:39.570Z,1516717299.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:21:39.571Z,1516717299.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:39.949Z,1516717299.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:39.969Z,1516717299.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:21:39.970Z,1516717299.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:40.344Z,1516717300.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:40.358Z,1516717300.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:21:40.360Z,1516717300.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:40.728Z,1516717300.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:40.760Z,1516717300.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:21:40.761Z,1516717300.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:41.140Z,1516717301.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:41.154Z,1516717301.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:21:41.155Z,1516717301.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:41.552Z,1516717301.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:41.566Z,1516717301.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:21:41.567Z,1516717301.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:41.947Z,1516717301.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:41.961Z,1516717301.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:21:41.962Z,1516717301.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:42.345Z,1516717302.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:42.359Z,1516717302.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:21:42.360Z,1516717302.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:42.727Z,1516717302.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:42.754Z,1516717302.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:21:42.755Z,1516717302.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:43.149Z,1516717303.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:43.164Z,1516717303.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:21:43.165Z,1516717303.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:43.524Z,1516717303.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:43.550Z,1516717303.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:21:43.551Z,1516717303.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:43.945Z,1516717303.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:43.960Z,1516717303.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:21:43.961Z,1516717303.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:44.346Z,1516717304.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:44.368Z,1516717304.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:21:44.369Z,1516717304.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:44.750Z,1516717304.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:44.772Z,1516717304.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:21:44.773Z,1516717304.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:45.122Z,1516717305.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:45.162Z,1516717305.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:45.530Z,1516717305.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:45.556Z,1516717305.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:45.927Z,1516717305.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:45.962Z,1516717305.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:46.329Z,1516717306.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:46.356Z,1516717306.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:46.754Z,1516717306.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:46.769Z,1516717306.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:47.149Z,1516717307.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:47.164Z,1516717307.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:47.544Z,1516717307.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:47.560Z,1516717307.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:47.940Z,1516717307.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:47.958Z,1516717307.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:48.344Z,1516717308.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:48.359Z,1516717308.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:48.722Z,1516717308.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:48.761Z,1516717308.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:49.131Z,1516717309.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:49.157Z,1516717309.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:49.526Z,1516717309.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:49.557Z,1516717309.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:49.952Z,1516717309.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:49.967Z,1516717309.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:50.350Z,1516717310.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:50.365Z,1516717310.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:50.745Z,1516717310.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:50.759Z,1516717310.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:51.127Z,1516717311.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:51.165Z,1516717311.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:51.532Z,1516717311.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:51.558Z,1516717311.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:51.929Z,1516717311.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:51.964Z,1516717311.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:52.323Z,1516717312.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:52.349Z,1516717312.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:52.736Z,1516717312.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:52.761Z,1516717312.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:53.151Z,1516717313.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:53.166Z,1516717313.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:53.536Z,1516717313.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:53.570Z,1516717313.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:53.934Z,1516717313.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:53.969Z,1516717313.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:54.338Z,1516717314.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:54.367Z,1516717314.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:54.733Z,1516717314.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:54.764Z,1516717314.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:55.133Z,1516717315.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:55.173Z,1516717315.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:55.176Z,1516717315.176 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:16:54.9Z 2018-01-23T14:21:55.176Z,1516717315.176 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:21:55.176Z,1516717315.176 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:21:55.530Z,1516717315.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:55.539Z,1516717315.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x48281 got:0x51136 2018-01-23T14:21:55.577Z,1516717315.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:56.069Z,1516717316.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:56.084Z,1516717316.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:56.359Z,1516717316.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:56.374Z,1516717316.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:59.447Z,1516717319.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:59.476Z,1516717319.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:59.565Z,1516717319.565 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0260.lzma 2018-01-23T14:21:59.586Z,1516717319.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:59.628Z,1516717319.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:21:59.932Z,1516717319.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:21:59.976Z,1516717319.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:00.309Z,1516717320.309 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0260.lzma.bak 2018-01-23T14:22:00.309Z,1516717320.309 [DataOverHttps](INFO): SBD MOMSN=7755702 2018-01-23T14:22:00.330Z,1516717320.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:00.349Z,1516717320.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:00.975Z,1516717320.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:00.990Z,1516717320.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:01.134Z,1516717321.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:01.173Z,1516717321.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:04.249Z,1516717324.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:04.282Z,1516717324.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:04.388Z,1516717324.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:04.425Z,1516717324.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:04.747Z,1516717324.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:04.785Z,1516717324.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:05.137Z,1516717325.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:05.171Z,1516717325.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:05.534Z,1516717325.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:05.551Z,1516717325.551 [PNI_TCM](ERROR): CRC does not match. Expected:0x36901 got:0x35100 2018-01-23T14:22:05.581Z,1516717325.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:05.935Z,1516717325.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:05.958Z,1516717325.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:09.028Z,1516717329.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:09.043Z,1516717329.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:09.123Z,1516717329.123 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0261.lzma 2018-01-23T14:22:09.156Z,1516717329.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:09.193Z,1516717329.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:09.511Z,1516717329.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:09.557Z,1516717329.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:09.869Z,1516717329.869 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0261.lzma.bak 2018-01-23T14:22:09.869Z,1516717329.869 [DataOverHttps](INFO): SBD MOMSN=7755705 2018-01-23T14:22:09.905Z,1516717329.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:09.952Z,1516717329.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:10.535Z,1516717330.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:10.550Z,1516717330.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:10.553Z,1516717330.553 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:22:10.553Z,1516717330.553 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:22:10.554Z,1516717330.554 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:22:10.691Z,1516717330.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:10.726Z,1516717330.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:14.026Z,1516717334.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:14.041Z,1516717334.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:14.143Z,1516717334.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:14.194Z,1516717334.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:14.511Z,1516717334.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:14.542Z,1516717334.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:14.906Z,1516717334.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:14.940Z,1516717334.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:15.296Z,1516717335.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:15.311Z,1516717335.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:15.689Z,1516717335.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:15.709Z,1516717335.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:16.087Z,1516717336.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:16.101Z,1516717336.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:16.488Z,1516717336.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:16.517Z,1516717336.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:16.898Z,1516717336.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:16.913Z,1516717336.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:17.299Z,1516717337.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:17.314Z,1516717337.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:17.698Z,1516717337.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:17.721Z,1516717337.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:18.090Z,1516717338.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:18.117Z,1516717338.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:18.498Z,1516717338.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:18.512Z,1516717338.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:18.898Z,1516717338.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:18.913Z,1516717338.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:19.287Z,1516717339.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:19.314Z,1516717339.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:19.705Z,1516717339.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:19.720Z,1516717339.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:20.105Z,1516717340.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:20.132Z,1516717340.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:20.496Z,1516717340.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:20.526Z,1516717340.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:20.888Z,1516717340.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:20.903Z,1516717340.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:21.289Z,1516717341.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:21.309Z,1516717341.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:21.690Z,1516717341.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:21.717Z,1516717341.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:22.093Z,1516717342.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:22.108Z,1516717342.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:22.490Z,1516717342.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:22.505Z,1516717342.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:22.911Z,1516717342.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:22.935Z,1516717342.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:23.311Z,1516717343.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:23.337Z,1516717343.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:23.704Z,1516717343.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:23.718Z,1516717343.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:24.091Z,1516717344.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:24.110Z,1516717344.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:24.494Z,1516717344.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:24.509Z,1516717344.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:24.892Z,1516717344.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:24.916Z,1516717344.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:25.288Z,1516717345.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:25.321Z,1516717345.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:25.706Z,1516717345.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:25.721Z,1516717345.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:26.100Z,1516717346.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:26.128Z,1516717346.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:26.509Z,1516717346.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:26.529Z,1516717346.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:26.902Z,1516717346.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:26.917Z,1516717346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:27.286Z,1516717347.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:27.314Z,1516717347.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:27.692Z,1516717347.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:27.721Z,1516717347.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:28.086Z,1516717348.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:28.123Z,1516717348.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:28.484Z,1516717348.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:28.511Z,1516717348.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:28.896Z,1516717348.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:28.935Z,1516717348.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:29.308Z,1516717349.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:29.337Z,1516717349.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:29.697Z,1516717349.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:29.734Z,1516717349.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:30.084Z,1516717350.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:30.142Z,1516717350.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:30.484Z,1516717350.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:30.530Z,1516717350.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:30.889Z,1516717350.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:30.921Z,1516717350.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:31.284Z,1516717351.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:31.305Z,1516717351.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:31.699Z,1516717351.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:31.735Z,1516717351.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:32.095Z,1516717352.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:32.111Z,1516717352.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:32.499Z,1516717352.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:32.515Z,1516717352.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:32.892Z,1516717352.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:32.909Z,1516717352.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:33.292Z,1516717353.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:33.307Z,1516717353.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:33.691Z,1516717353.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:33.706Z,1516717353.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:34.093Z,1516717354.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:34.112Z,1516717354.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:34.488Z,1516717354.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:34.515Z,1516717354.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:34.897Z,1516717354.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:34.917Z,1516717354.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:35.299Z,1516717355.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:35.314Z,1516717355.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:35.712Z,1516717355.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:35.753Z,1516717355.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:36.089Z,1516717356.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:36.116Z,1516717356.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:36.493Z,1516717356.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:36.508Z,1516717356.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:36.889Z,1516717356.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:36.911Z,1516717356.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:37.292Z,1516717357.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:37.313Z,1516717357.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:37.703Z,1516717357.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:37.718Z,1516717357.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:38.098Z,1516717358.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:38.125Z,1516717358.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:38.506Z,1516717358.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:38.521Z,1516717358.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:38.891Z,1516717358.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:38.917Z,1516717358.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:39.282Z,1516717359.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:39.314Z,1516717359.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:39.696Z,1516717359.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:39.714Z,1516717359.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:40.085Z,1516717360.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:40.121Z,1516717360.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:40.482Z,1516717360.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:40.517Z,1516717360.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:40.903Z,1516717360.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:40.918Z,1516717360.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:41.308Z,1516717361.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:41.322Z,1516717361.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:41.703Z,1516717361.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:41.718Z,1516717361.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:42.084Z,1516717362.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:42.121Z,1516717362.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:42.487Z,1516717362.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:42.520Z,1516717362.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:42.889Z,1516717362.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:42.916Z,1516717362.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:43.284Z,1516717363.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:43.310Z,1516717363.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:43.702Z,1516717363.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:43.726Z,1516717363.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:44.101Z,1516717364.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:44.128Z,1516717364.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:44.507Z,1516717364.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:44.522Z,1516717364.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:44.884Z,1516717364.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:44.918Z,1516717364.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:45.282Z,1516717365.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:45.305Z,1516717365.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:45.684Z,1516717365.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:45.720Z,1516717365.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:46.085Z,1516717366.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:46.122Z,1516717366.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:46.482Z,1516717366.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:46.497Z,1516717366.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:46.896Z,1516717366.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:46.921Z,1516717366.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:47.299Z,1516717367.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:47.326Z,1516717367.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:47.695Z,1516717367.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:47.729Z,1516717367.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:48.084Z,1516717368.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:48.121Z,1516717368.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:48.485Z,1516717368.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:48.504Z,1516717368.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:48.893Z,1516717368.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:48.908Z,1516717368.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:49.289Z,1516717369.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:49.304Z,1516717369.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:49.698Z,1516717369.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:49.713Z,1516717369.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:50.103Z,1516717370.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:50.118Z,1516717370.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:50.495Z,1516717370.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:50.510Z,1516717370.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:50.890Z,1516717370.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:50.917Z,1516717370.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:51.289Z,1516717371.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:51.304Z,1516717371.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:51.695Z,1516717371.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:51.710Z,1516717371.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:52.099Z,1516717372.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:52.120Z,1516717372.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:52.496Z,1516717372.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:52.510Z,1516717372.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:52.890Z,1516717372.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:52.919Z,1516717372.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:53.290Z,1516717373.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:53.310Z,1516717373.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:53.703Z,1516717373.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:53.718Z,1516717373.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:54.106Z,1516717374.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:54.125Z,1516717374.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:54.507Z,1516717374.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:54.522Z,1516717374.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:54.897Z,1516717374.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:54.912Z,1516717374.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:55.287Z,1516717375.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:55.319Z,1516717375.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:55.707Z,1516717375.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:55.722Z,1516717375.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:56.102Z,1516717376.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:56.117Z,1516717376.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:56.501Z,1516717376.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:56.520Z,1516717376.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:56.889Z,1516717376.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:56.916Z,1516717376.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:57.282Z,1516717377.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:57.317Z,1516717377.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:57.700Z,1516717377.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:57.727Z,1516717377.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:58.108Z,1516717378.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:58.124Z,1516717378.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:58.500Z,1516717378.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:58.530Z,1516717378.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:58.885Z,1516717378.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:58.917Z,1516717378.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:59.285Z,1516717379.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:59.321Z,1516717379.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:22:59.707Z,1516717379.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:22:59.722Z,1516717379.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:00.106Z,1516717380.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:00.121Z,1516717380.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:00.499Z,1516717380.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:00.532Z,1516717380.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:00.885Z,1516717380.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:00.917Z,1516717380.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:01.284Z,1516717381.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:01.320Z,1516717381.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:01.695Z,1516717381.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:01.733Z,1516717381.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:02.107Z,1516717382.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:02.126Z,1516717382.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:02.516Z,1516717382.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:02.531Z,1516717382.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:02.893Z,1516717382.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:02.922Z,1516717382.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:03.285Z,1516717383.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:03.321Z,1516717383.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:03.695Z,1516717383.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:03.733Z,1516717383.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:04.113Z,1516717384.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:04.128Z,1516717384.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:04.496Z,1516717384.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:04.522Z,1516717384.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:04.886Z,1516717384.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:04.925Z,1516717384.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:05.289Z,1516717385.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:05.304Z,1516717385.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:05.700Z,1516717385.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:05.734Z,1516717385.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:06.120Z,1516717386.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:06.141Z,1516717386.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:06.500Z,1516717386.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:06.556Z,1516717386.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:06.893Z,1516717386.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:06.909Z,1516717386.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:07.293Z,1516717387.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:07.309Z,1516717387.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:07.697Z,1516717387.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:07.713Z,1516717387.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:08.099Z,1516717388.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:08.114Z,1516717388.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:08.497Z,1516717388.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:08.512Z,1516717388.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:08.894Z,1516717388.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:08.910Z,1516717388.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:09.293Z,1516717389.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:09.308Z,1516717389.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:09.697Z,1516717389.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:09.712Z,1516717389.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:10.101Z,1516717390.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:10.116Z,1516717390.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:10.513Z,1516717390.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:10.544Z,1516717390.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:10.894Z,1516717390.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:10.910Z,1516717390.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:11.294Z,1516717391.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:11.309Z,1516717391.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:14.404Z,1516717394.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:14.425Z,1516717394.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:14.553Z,1516717394.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:14.568Z,1516717394.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:14.908Z,1516717394.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:14.922Z,1516717394.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:15.306Z,1516717395.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:15.325Z,1516717395.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:15.702Z,1516717395.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:15.726Z,1516717395.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:16.106Z,1516717396.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:16.120Z,1516717396.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:16.502Z,1516717396.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:16.526Z,1516717396.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:16.923Z,1516717396.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:16.938Z,1516717396.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:17.315Z,1516717397.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:17.330Z,1516717397.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:17.714Z,1516717397.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:17.737Z,1516717397.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:18.103Z,1516717398.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:18.124Z,1516717398.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:18.509Z,1516717398.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:18.524Z,1516717398.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:18.901Z,1516717398.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:18.923Z,1516717398.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:19.300Z,1516717399.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:19.322Z,1516717399.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:19.715Z,1516717399.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:19.730Z,1516717399.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:20.119Z,1516717400.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:20.141Z,1516717400.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:20.519Z,1516717400.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:20.541Z,1516717400.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:20.910Z,1516717400.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:20.925Z,1516717400.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:21.296Z,1516717401.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:21.333Z,1516717401.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:21.723Z,1516717401.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:21.738Z,1516717401.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:22.119Z,1516717402.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:22.134Z,1516717402.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:22.515Z,1516717402.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:22.530Z,1516717402.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:22.897Z,1516717402.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:22.928Z,1516717402.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:23.304Z,1516717403.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:23.332Z,1516717403.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:23.724Z,1516717403.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:23.739Z,1516717403.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:24.119Z,1516717404.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:24.141Z,1516717404.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:24.507Z,1516717404.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:24.537Z,1516717404.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:24.905Z,1516717404.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:24.932Z,1516717404.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:25.304Z,1516717405.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:25.330Z,1516717405.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:25.707Z,1516717405.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:25.735Z,1516717405.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:26.119Z,1516717406.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:26.141Z,1516717406.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:26.516Z,1516717406.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:26.537Z,1516717406.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:26.901Z,1516717406.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:26.934Z,1516717406.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:27.300Z,1516717407.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:27.334Z,1516717407.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:27.707Z,1516717407.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:27.734Z,1516717407.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:28.120Z,1516717408.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:28.135Z,1516717408.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:28.523Z,1516717408.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:28.545Z,1516717408.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:28.905Z,1516717408.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:28.931Z,1516717408.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:29.296Z,1516717409.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:29.334Z,1516717409.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:29.723Z,1516717409.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:29.745Z,1516717409.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:30.128Z,1516717410.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:30.142Z,1516717410.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:30.520Z,1516717410.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:30.540Z,1516717410.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:30.905Z,1516717410.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:30.932Z,1516717410.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:31.298Z,1516717411.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:31.325Z,1516717411.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:31.725Z,1516717411.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:31.740Z,1516717411.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:32.127Z,1516717412.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:32.142Z,1516717412.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:32.507Z,1516717412.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:32.533Z,1516717412.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:32.899Z,1516717412.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:32.938Z,1516717412.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:33.302Z,1516717413.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:33.337Z,1516717413.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:33.715Z,1516717413.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:33.741Z,1516717413.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:34.111Z,1516717414.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:34.141Z,1516717414.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:34.512Z,1516717414.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:34.538Z,1516717414.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:34.899Z,1516717414.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:34.914Z,1516717414.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:35.301Z,1516717415.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:35.316Z,1516717415.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:35.709Z,1516717415.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:35.745Z,1516717415.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:36.112Z,1516717416.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:36.151Z,1516717416.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:36.515Z,1516717416.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:36.530Z,1516717416.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:36.923Z,1516717416.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:36.953Z,1516717416.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:37.312Z,1516717417.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:37.333Z,1516717417.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:37.706Z,1516717417.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:37.728Z,1516717417.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:38.109Z,1516717418.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:38.124Z,1516717418.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:38.509Z,1516717418.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:38.525Z,1516717418.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:38.911Z,1516717418.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:38.926Z,1516717418.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:39.313Z,1516717419.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:39.333Z,1516717419.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:39.716Z,1516717419.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:39.731Z,1516717419.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:40.107Z,1516717420.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:40.128Z,1516717420.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:40.513Z,1516717420.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:40.528Z,1516717420.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:40.908Z,1516717420.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:40.923Z,1516717420.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:41.309Z,1516717421.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:41.323Z,1516717421.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:41.704Z,1516717421.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:41.731Z,1516717421.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:42.118Z,1516717422.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:42.137Z,1516717422.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:42.521Z,1516717422.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:42.537Z,1516717422.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:42.921Z,1516717422.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:42.937Z,1516717422.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:43.314Z,1516717423.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:43.329Z,1516717423.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:43.710Z,1516717423.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:43.725Z,1516717423.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:44.116Z,1516717424.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:44.132Z,1516717424.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:44.508Z,1516717424.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:44.522Z,1516717424.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:44.917Z,1516717424.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:44.937Z,1516717424.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:45.322Z,1516717425.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:45.345Z,1516717425.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:45.720Z,1516717425.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:45.735Z,1516717425.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:46.097Z,1516717426.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:46.130Z,1516717426.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:46.498Z,1516717426.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:46.533Z,1516717426.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:46.899Z,1516717426.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:46.938Z,1516717426.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:47.297Z,1516717427.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:47.337Z,1516717427.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:47.706Z,1516717427.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:47.734Z,1516717427.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:48.124Z,1516717428.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:48.140Z,1516717428.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:48.521Z,1516717428.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:48.537Z,1516717428.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:48.912Z,1516717428.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:48.953Z,1516717428.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:49.303Z,1516717429.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:49.332Z,1516717429.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:49.701Z,1516717429.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:49.740Z,1516717429.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:50.106Z,1516717430.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:50.133Z,1516717430.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:50.495Z,1516717430.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:50.540Z,1516717430.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:50.910Z,1516717430.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:50.954Z,1516717430.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:51.317Z,1516717431.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:51.348Z,1516717431.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:51.708Z,1516717431.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:51.737Z,1516717431.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:52.096Z,1516717432.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:52.138Z,1516717432.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:52.494Z,1516717432.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:52.520Z,1516717432.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:52.897Z,1516717432.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:52.931Z,1516717432.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:53.303Z,1516717433.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:53.318Z,1516717433.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:53.700Z,1516717433.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:53.749Z,1516717433.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:54.107Z,1516717434.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:54.140Z,1516717434.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:54.513Z,1516717434.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:54.541Z,1516717434.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:54.909Z,1516717434.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:54.941Z,1516717434.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:55.295Z,1516717435.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:55.343Z,1516717435.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:55.696Z,1516717435.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:55.711Z,1516717435.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:56.107Z,1516717436.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:56.140Z,1516717436.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:56.503Z,1516717436.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:56.525Z,1516717436.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:56.915Z,1516717436.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:56.951Z,1516717436.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:57.311Z,1516717437.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:57.342Z,1516717437.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:57.709Z,1516717437.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:57.726Z,1516717437.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:58.107Z,1516717438.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:58.122Z,1516717438.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:58.500Z,1516717438.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:58.544Z,1516717438.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:58.900Z,1516717438.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:58.928Z,1516717438.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:59.306Z,1516717439.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:59.324Z,1516717439.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:23:59.706Z,1516717439.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:23:59.722Z,1516717439.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:00.109Z,1516717440.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:00.151Z,1516717440.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:00.510Z,1516717440.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:00.529Z,1516717440.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:00.910Z,1516717440.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:00.928Z,1516717440.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:01.306Z,1516717441.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:01.322Z,1516717441.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:01.705Z,1516717441.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:01.756Z,1516717441.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:02.108Z,1516717442.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:02.125Z,1516717442.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:02.504Z,1516717442.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:02.524Z,1516717442.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:02.913Z,1516717442.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:02.928Z,1516717442.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:03.309Z,1516717443.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:03.353Z,1516717443.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:03.710Z,1516717443.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:03.732Z,1516717443.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:04.105Z,1516717444.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:04.129Z,1516717444.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:04.502Z,1516717444.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:04.521Z,1516717444.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:04.904Z,1516717444.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:04.925Z,1516717444.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:05.306Z,1516717445.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:05.329Z,1516717445.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:05.702Z,1516717445.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:05.718Z,1516717445.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:06.116Z,1516717446.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:06.131Z,1516717446.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:06.514Z,1516717446.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:06.550Z,1516717446.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:06.914Z,1516717446.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:06.936Z,1516717446.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:07.308Z,1516717447.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:07.332Z,1516717447.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:07.709Z,1516717447.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:07.727Z,1516717447.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:08.109Z,1516717448.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:08.124Z,1516717448.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:08.499Z,1516717448.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:08.522Z,1516717448.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:08.916Z,1516717448.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:08.935Z,1516717448.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:09.320Z,1516717449.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:09.336Z,1516717449.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:09.714Z,1516717449.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:09.759Z,1516717449.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:10.106Z,1516717450.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:10.128Z,1516717450.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:10.494Z,1516717450.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:10.531Z,1516717450.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:10.908Z,1516717450.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:10.930Z,1516717450.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:11.298Z,1516717451.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:11.324Z,1516717451.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:14.407Z,1516717454.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:14.422Z,1516717454.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:14.535Z,1516717454.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:14.573Z,1516717454.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:14.887Z,1516717454.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:14.902Z,1516717454.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:15.290Z,1516717455.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:15.305Z,1516717455.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:15.679Z,1516717455.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:15.694Z,1516717455.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:16.069Z,1516717456.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:16.093Z,1516717456.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:16.473Z,1516717456.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:16.488Z,1516717456.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:16.882Z,1516717456.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:16.898Z,1516717456.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:17.286Z,1516717457.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:17.301Z,1516717457.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:17.687Z,1516717457.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:17.708Z,1516717457.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:18.077Z,1516717458.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:18.097Z,1516717458.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:18.481Z,1516717458.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:18.501Z,1516717458.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:18.874Z,1516717458.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:18.888Z,1516717458.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:19.270Z,1516717459.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:19.294Z,1516717459.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:19.682Z,1516717459.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:19.697Z,1516717459.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:19.699Z,1516717459.699 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:19.699Z,1516717459.699 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 222 2018-01-23T14:24:19.699Z,1516717459.699 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:24:19.711Z,1516717459.711 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:24:20.089Z,1516717460.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:20.104Z,1516717460.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:20.116Z,1516717460.116 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:24:20.116Z,1516717460.116 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 222 2018-01-23T14:24:20.484Z,1516717460.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:20.511Z,1516717460.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:20.512Z,1516717460.512 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:24:20.513Z,1516717460.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:24:20.513Z,1516717460.513 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:24:20.884Z,1516717460.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:20.899Z,1516717460.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:21.264Z,1516717461.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:21.300Z,1516717461.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:21.673Z,1516717461.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:21.705Z,1516717461.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:22.066Z,1516717462.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:22.094Z,1516717462.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:22.465Z,1516717462.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:22.505Z,1516717462.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:22.876Z,1516717462.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:22.911Z,1516717462.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:23.297Z,1516717463.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:23.312Z,1516717463.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:23.683Z,1516717463.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:23.720Z,1516717463.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:24.064Z,1516717464.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:24.079Z,1516717464.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:24.478Z,1516717464.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:24.510Z,1516717464.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:24.870Z,1516717464.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:24.885Z,1516717464.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:25.273Z,1516717465.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:25.289Z,1516717465.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:25.673Z,1516717465.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:25.693Z,1516717465.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:26.076Z,1516717466.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:26.092Z,1516717466.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:26.092Z,1516717466.092 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 222 2018-01-23T14:24:26.092Z,1516717466.092 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:24:26.094Z,1516717466.094 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:26.094Z,1516717466.094 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 222 2018-01-23T14:24:26.094Z,1516717466.094 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:24:26.132Z,1516717466.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:24:26.132Z,1516717466.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:24:26.480Z,1516717466.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:26.515Z,1516717466.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:24:26.515Z,1516717466.515 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 222 2018-01-23T14:24:26.516Z,1516717466.516 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:24:26.516Z,1516717466.516 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 222 2018-01-23T14:24:26.878Z,1516717466.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:26.917Z,1516717466.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:24:26.917Z,1516717466.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:24:26.918Z,1516717466.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:24:26.918Z,1516717466.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:24:26.919Z,1516717466.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:24:26.919Z,1516717466.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:24:27.273Z,1516717467.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:27.293Z,1516717467.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:24:27.294Z,1516717467.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:27.681Z,1516717467.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:27.696Z,1516717467.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:24:27.697Z,1516717467.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:28.072Z,1516717468.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:28.091Z,1516717468.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:24:28.092Z,1516717468.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:28.473Z,1516717468.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:28.487Z,1516717468.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:24:28.488Z,1516717468.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:28.880Z,1516717468.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:28.904Z,1516717468.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:24:28.905Z,1516717468.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:29.287Z,1516717469.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:29.301Z,1516717469.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:24:29.302Z,1516717469.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:29.691Z,1516717469.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:29.713Z,1516717469.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:24:29.714Z,1516717469.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:30.062Z,1516717470.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:30.093Z,1516717470.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:24:30.094Z,1516717470.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:30.464Z,1516717470.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:30.490Z,1516717470.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:24:30.491Z,1516717470.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:30.864Z,1516717470.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:30.900Z,1516717470.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:24:30.901Z,1516717470.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:30.914Z,1516717470.914 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:24:31.282Z,1516717471.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:31.296Z,1516717471.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:24:31.297Z,1516717471.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:31.669Z,1516717471.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:31.700Z,1516717471.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:24:31.701Z,1516717471.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:32.084Z,1516717472.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:32.098Z,1516717472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:24:32.099Z,1516717472.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:32.484Z,1516717472.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:32.505Z,1516717472.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:24:32.506Z,1516717472.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:32.880Z,1516717472.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:32.901Z,1516717472.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:24:32.901Z,1516717472.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:33.265Z,1516717473.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:33.298Z,1516717473.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:24:33.299Z,1516717473.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:33.681Z,1516717473.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:33.696Z,1516717473.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:24:33.697Z,1516717473.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:34.065Z,1516717474.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:34.097Z,1516717474.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:24:34.098Z,1516717474.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:34.464Z,1516717474.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:34.500Z,1516717474.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:24:34.501Z,1516717474.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:34.878Z,1516717474.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:34.910Z,1516717474.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:24:34.911Z,1516717474.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:35.287Z,1516717475.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:35.302Z,1516717475.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:24:35.303Z,1516717475.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:35.694Z,1516717475.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:35.708Z,1516717475.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:24:35.709Z,1516717475.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:36.062Z,1516717476.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:36.100Z,1516717476.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:24:36.101Z,1516717476.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:36.469Z,1516717476.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:36.494Z,1516717476.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:24:36.495Z,1516717476.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:36.864Z,1516717476.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:36.897Z,1516717476.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:24:36.898Z,1516717476.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:37.269Z,1516717477.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:37.295Z,1516717477.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:24:37.296Z,1516717477.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:37.669Z,1516717477.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:37.694Z,1516717477.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:24:37.695Z,1516717477.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:38.079Z,1516717478.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:38.102Z,1516717478.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:24:38.103Z,1516717478.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:38.487Z,1516717478.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:38.502Z,1516717478.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:24:38.503Z,1516717478.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:38.879Z,1516717478.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:38.905Z,1516717478.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:24:38.906Z,1516717478.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:39.265Z,1516717479.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:39.297Z,1516717479.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:24:39.298Z,1516717479.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:39.665Z,1516717479.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:39.696Z,1516717479.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:24:39.697Z,1516717479.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:40.065Z,1516717480.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:40.104Z,1516717480.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:24:40.105Z,1516717480.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:40.468Z,1516717480.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:40.502Z,1516717480.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:24:40.503Z,1516717480.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:40.875Z,1516717480.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:40.905Z,1516717480.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:24:40.906Z,1516717480.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:41.287Z,1516717481.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:41.302Z,1516717481.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:24:41.303Z,1516717481.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:41.688Z,1516717481.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:41.708Z,1516717481.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:24:41.709Z,1516717481.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:42.062Z,1516717482.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:42.077Z,1516717482.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:24:42.078Z,1516717482.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:42.464Z,1516717482.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:42.480Z,1516717482.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:24:42.481Z,1516717482.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:42.865Z,1516717482.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:42.879Z,1516717482.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:24:42.880Z,1516717482.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:43.273Z,1516717483.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:43.288Z,1516717483.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:24:43.289Z,1516717483.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:43.676Z,1516717483.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:43.716Z,1516717483.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:24:43.717Z,1516717483.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:44.079Z,1516717484.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:44.094Z,1516717484.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:24:44.095Z,1516717484.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:44.479Z,1516717484.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:44.494Z,1516717484.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:24:44.495Z,1516717484.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:44.878Z,1516717484.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:44.896Z,1516717484.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:24:44.897Z,1516717484.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:45.273Z,1516717485.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:45.288Z,1516717485.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:24:45.288Z,1516717485.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:45.678Z,1516717485.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:45.692Z,1516717485.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:24:45.693Z,1516717485.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:46.072Z,1516717486.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:46.090Z,1516717486.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:24:46.091Z,1516717486.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:46.473Z,1516717486.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:46.488Z,1516717486.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:46.878Z,1516717486.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:46.901Z,1516717486.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:47.282Z,1516717487.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:47.301Z,1516717487.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:47.683Z,1516717487.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:47.704Z,1516717487.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:48.070Z,1516717488.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:48.085Z,1516717488.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:48.468Z,1516717488.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:48.495Z,1516717488.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:48.871Z,1516717488.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:48.900Z,1516717488.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:49.272Z,1516717489.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:49.292Z,1516717489.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:49.670Z,1516717489.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:49.697Z,1516717489.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:50.084Z,1516717490.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:50.099Z,1516717490.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:50.480Z,1516717490.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:50.507Z,1516717490.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:50.884Z,1516717490.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:50.898Z,1516717490.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:51.265Z,1516717491.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:51.298Z,1516717491.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:51.673Z,1516717491.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:51.699Z,1516717491.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:52.065Z,1516717492.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:52.097Z,1516717492.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:52.468Z,1516717492.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:52.503Z,1516717492.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:52.875Z,1516717492.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:52.909Z,1516717492.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:53.291Z,1516717493.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:53.306Z,1516717493.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:53.702Z,1516717493.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:53.717Z,1516717493.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:54.062Z,1516717494.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:54.077Z,1516717494.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:54.468Z,1516717494.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:54.505Z,1516717494.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:54.865Z,1516717494.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:54.909Z,1516717494.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:55.269Z,1516717495.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:55.301Z,1516717495.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:55.673Z,1516717495.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:55.704Z,1516717495.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:56.083Z,1516717496.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:56.111Z,1516717496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:56.475Z,1516717496.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:56.490Z,1516717496.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:56.883Z,1516717496.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:56.914Z,1516717496.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:57.274Z,1516717497.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:57.289Z,1516717497.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:57.670Z,1516717497.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:57.685Z,1516717497.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:58.077Z,1516717498.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:58.092Z,1516717498.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:58.473Z,1516717498.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:58.497Z,1516717498.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:58.876Z,1516717498.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:58.891Z,1516717498.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:59.280Z,1516717499.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:59.301Z,1516717499.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:24:59.683Z,1516717499.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:24:59.698Z,1516717499.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:00.079Z,1516717500.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:00.094Z,1516717500.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:00.479Z,1516717500.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:00.494Z,1516717500.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:00.880Z,1516717500.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:00.900Z,1516717500.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:01.276Z,1516717501.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:01.300Z,1516717501.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:01.684Z,1516717501.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:01.700Z,1516717501.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:02.072Z,1516717502.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:02.104Z,1516717502.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:02.465Z,1516717502.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:02.497Z,1516717502.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:02.884Z,1516717502.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:02.899Z,1516717502.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:03.288Z,1516717503.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:03.309Z,1516717503.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:03.687Z,1516717503.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:03.702Z,1516717503.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:04.072Z,1516717504.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:04.093Z,1516717504.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:04.473Z,1516717504.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:04.489Z,1516717504.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:04.884Z,1516717504.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:04.900Z,1516717504.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:05.284Z,1516717505.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:05.305Z,1516717505.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:05.688Z,1516717505.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:05.704Z,1516717505.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:06.065Z,1516717506.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:06.100Z,1516717506.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:06.464Z,1516717506.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:06.501Z,1516717506.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:06.885Z,1516717506.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:06.900Z,1516717506.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:07.283Z,1516717507.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:07.301Z,1516717507.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:07.684Z,1516717507.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:07.705Z,1516717507.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:08.065Z,1516717508.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:08.098Z,1516717508.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:08.462Z,1516717508.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:08.485Z,1516717508.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:08.876Z,1516717508.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:08.910Z,1516717508.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:09.292Z,1516717509.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:09.306Z,1516717509.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:09.692Z,1516717509.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:09.707Z,1516717509.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:10.073Z,1516717510.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:10.099Z,1516717510.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:10.463Z,1516717510.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:10.502Z,1516717510.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:10.876Z,1516717510.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:10.911Z,1516717510.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:11.287Z,1516717511.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:11.309Z,1516717511.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:11.676Z,1516717511.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:11.709Z,1516717511.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:14.764Z,1516717514.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:14.800Z,1516717514.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:14.873Z,1516717514.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:14.902Z,1516717514.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:15.275Z,1516717515.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:15.301Z,1516717515.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:15.679Z,1516717515.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:15.709Z,1516717515.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:16.075Z,1516717516.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:16.099Z,1516717516.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:16.465Z,1516717516.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:16.505Z,1516717516.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:16.854Z,1516717516.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:16.882Z,1516717516.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:17.262Z,1516717517.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:17.282Z,1516717517.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:17.661Z,1516717517.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:17.675Z,1516717517.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:18.065Z,1516717518.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:18.085Z,1516717518.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:18.467Z,1516717518.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:18.482Z,1516717518.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:18.866Z,1516717518.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:18.881Z,1516717518.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:19.256Z,1516717519.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:19.276Z,1516717519.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:19.657Z,1516717519.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:19.678Z,1516717519.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:20.061Z,1516717520.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:20.076Z,1516717520.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:20.461Z,1516717520.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:20.477Z,1516717520.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:20.860Z,1516717520.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:20.881Z,1516717520.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:21.266Z,1516717521.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:21.288Z,1516717521.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:21.666Z,1516717521.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:21.685Z,1516717521.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:22.065Z,1516717522.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:22.085Z,1516717522.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:22.465Z,1516717522.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:22.480Z,1516717522.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:22.856Z,1516717522.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:22.876Z,1516717522.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:23.257Z,1516717523.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:23.284Z,1516717523.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:23.660Z,1516717523.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:23.684Z,1516717523.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:24.067Z,1516717524.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:24.086Z,1516717524.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:24.474Z,1516717524.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:24.493Z,1516717524.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:24.875Z,1516717524.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:24.897Z,1516717524.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:25.250Z,1516717525.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:25.277Z,1516717525.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:25.656Z,1516717525.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:25.687Z,1516717525.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:26.062Z,1516717526.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:26.085Z,1516717526.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:26.459Z,1516717526.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:26.477Z,1516717526.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:26.855Z,1516717526.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:26.887Z,1516717526.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:27.271Z,1516717527.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:27.286Z,1516717527.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:27.674Z,1516717527.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:27.689Z,1516717527.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:28.070Z,1516717528.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:28.085Z,1516717528.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:28.461Z,1516717528.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:28.481Z,1516717528.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:28.856Z,1516717528.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:28.878Z,1516717528.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:29.255Z,1516717529.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:29.288Z,1516717529.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:29.660Z,1516717529.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:29.681Z,1516717529.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:30.071Z,1516717530.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:30.086Z,1516717530.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:30.474Z,1516717530.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:30.493Z,1516717530.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:30.875Z,1516717530.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:30.897Z,1516717530.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:31.256Z,1516717531.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:31.278Z,1516717531.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:31.659Z,1516717531.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:31.678Z,1516717531.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:32.056Z,1516717532.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:32.093Z,1516717532.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:32.466Z,1516717532.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:32.481Z,1516717532.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:32.852Z,1516717532.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:32.885Z,1516717532.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:33.268Z,1516717533.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:33.295Z,1516717533.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:33.676Z,1516717533.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:33.691Z,1516717533.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:34.076Z,1516717534.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:34.090Z,1516717534.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:34.467Z,1516717534.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:34.489Z,1516717534.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:34.853Z,1516717534.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:34.880Z,1516717534.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:35.252Z,1516717535.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:35.285Z,1516717535.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:35.653Z,1516717535.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:35.689Z,1516717535.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:36.076Z,1516717536.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:36.091Z,1516717536.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:36.471Z,1516717536.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:36.494Z,1516717536.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:36.873Z,1516717536.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:36.888Z,1516717536.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:37.252Z,1516717537.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:37.289Z,1516717537.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:37.653Z,1516717537.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:37.689Z,1516717537.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:38.057Z,1516717538.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:38.092Z,1516717538.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:38.457Z,1516717538.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:38.489Z,1516717538.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:38.861Z,1516717538.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:38.896Z,1516717538.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:39.271Z,1516717539.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:39.309Z,1516717539.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:39.671Z,1516717539.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:39.707Z,1516717539.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:40.083Z,1516717540.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:40.104Z,1516717540.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:40.458Z,1516717540.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:40.474Z,1516717540.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:40.862Z,1516717540.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:40.877Z,1516717540.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:41.260Z,1516717541.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:41.275Z,1516717541.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:41.662Z,1516717541.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:41.677Z,1516717541.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:42.069Z,1516717542.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:42.084Z,1516717542.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:42.477Z,1516717542.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:42.511Z,1516717542.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:42.864Z,1516717542.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:42.880Z,1516717542.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:43.260Z,1516717543.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:43.276Z,1516717543.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:43.658Z,1516717543.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:43.682Z,1516717543.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:44.062Z,1516717544.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:44.077Z,1516717544.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:44.456Z,1516717544.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:44.482Z,1516717544.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:44.856Z,1516717544.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:44.877Z,1516717544.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:45.272Z,1516717545.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:45.286Z,1516717545.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:45.674Z,1516717545.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:45.693Z,1516717545.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:46.074Z,1516717546.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:46.098Z,1516717546.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:46.452Z,1516717546.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:46.481Z,1516717546.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:46.852Z,1516717546.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:46.878Z,1516717546.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:47.253Z,1516717547.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:47.285Z,1516717547.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:47.653Z,1516717547.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:47.688Z,1516717547.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:48.075Z,1516717548.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:48.090Z,1516717548.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:48.481Z,1516717548.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:48.497Z,1516717548.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:48.869Z,1516717548.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:48.899Z,1516717548.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:49.252Z,1516717549.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:49.278Z,1516717549.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:49.653Z,1516717549.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:49.685Z,1516717549.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:50.052Z,1516717550.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:50.088Z,1516717550.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:50.457Z,1516717550.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:50.484Z,1516717550.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:50.852Z,1516717550.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:50.878Z,1516717550.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:51.270Z,1516717551.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:51.294Z,1516717551.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:51.675Z,1516717551.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:51.690Z,1516717551.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:52.068Z,1516717552.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:52.089Z,1516717552.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:52.452Z,1516717552.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:52.486Z,1516717552.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:52.856Z,1516717552.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:52.882Z,1516717552.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:53.253Z,1516717553.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:53.280Z,1516717553.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:53.674Z,1516717553.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:53.700Z,1516717553.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:54.071Z,1516717554.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:54.086Z,1516717554.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:54.474Z,1516717554.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:54.489Z,1516717554.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:54.873Z,1516717554.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:54.887Z,1516717554.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:55.253Z,1516717555.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:55.284Z,1516717555.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:55.653Z,1516717555.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:55.683Z,1516717555.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:56.056Z,1516717556.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:56.090Z,1516717556.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:56.457Z,1516717556.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:56.489Z,1516717556.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:56.852Z,1516717556.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:56.889Z,1516717556.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:57.263Z,1516717557.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:57.305Z,1516717557.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:57.679Z,1516717557.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:57.694Z,1516717557.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:58.079Z,1516717558.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:58.094Z,1516717558.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:58.453Z,1516717558.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:58.490Z,1516717558.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:58.857Z,1516717558.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:58.888Z,1516717558.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:59.253Z,1516717559.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:59.280Z,1516717559.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:25:59.668Z,1516717559.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:25:59.696Z,1516717559.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:00.067Z,1516717560.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:00.094Z,1516717560.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:00.467Z,1516717560.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:00.501Z,1516717560.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:00.863Z,1516717560.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:00.891Z,1516717560.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:01.252Z,1516717561.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:01.289Z,1516717561.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:01.653Z,1516717561.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:01.673Z,1516717561.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:02.060Z,1516717562.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:02.075Z,1516717562.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:02.461Z,1516717562.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:02.476Z,1516717562.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:02.858Z,1516717562.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:02.877Z,1516717562.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:03.271Z,1516717563.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:03.286Z,1516717563.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:03.667Z,1516717563.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:03.682Z,1516717563.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:04.063Z,1516717564.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:04.078Z,1516717564.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:04.460Z,1516717564.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:04.477Z,1516717564.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:04.858Z,1516717564.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:04.881Z,1516717564.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:05.261Z,1516717565.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:05.276Z,1516717565.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:05.663Z,1516717565.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:05.689Z,1516717565.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:06.066Z,1516717566.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:06.085Z,1516717566.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:06.467Z,1516717566.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:06.482Z,1516717566.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:06.866Z,1516717566.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:06.888Z,1516717566.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:07.262Z,1516717567.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:07.277Z,1516717567.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:07.666Z,1516717567.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:07.689Z,1516717567.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:08.061Z,1516717568.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:08.076Z,1516717568.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:08.460Z,1516717568.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:08.479Z,1516717568.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:08.860Z,1516717568.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:08.875Z,1516717568.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:09.270Z,1516717569.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:09.285Z,1516717569.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:09.671Z,1516717569.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:09.693Z,1516717569.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:10.070Z,1516717570.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:10.089Z,1516717570.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:10.465Z,1516717570.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:10.480Z,1516717570.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:10.868Z,1516717570.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:10.883Z,1516717570.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:11.260Z,1516717571.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:11.279Z,1516717571.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:11.661Z,1516717571.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:11.676Z,1516717571.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:12.071Z,1516717572.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:12.086Z,1516717572.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:16.957Z,1516717576.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:16.981Z,1516717576.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:17.112Z,1516717577.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:17.156Z,1516717577.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:17.478Z,1516717577.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:17.535Z,1516717577.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:17.877Z,1516717577.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:17.892Z,1516717577.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:18.285Z,1516717578.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:18.300Z,1516717578.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:18.682Z,1516717578.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:18.696Z,1516717578.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:19.083Z,1516717579.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:19.098Z,1516717579.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:19.488Z,1516717579.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:19.502Z,1516717579.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:19.885Z,1516717579.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:19.905Z,1516717579.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:20.281Z,1516717580.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:20.300Z,1516717580.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:20.680Z,1516717580.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:20.695Z,1516717580.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:21.086Z,1516717581.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:21.129Z,1516717581.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:21.485Z,1516717581.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:21.552Z,1516717581.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:21.887Z,1516717581.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:21.951Z,1516717581.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:22.297Z,1516717582.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:22.359Z,1516717582.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:22.701Z,1516717582.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:22.757Z,1516717582.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:23.097Z,1516717583.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:23.173Z,1516717583.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:23.486Z,1516717583.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:23.513Z,1516717583.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:23.874Z,1516717583.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:23.914Z,1516717583.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:24.288Z,1516717584.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:24.308Z,1516717584.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:24.678Z,1516717584.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:24.717Z,1516717584.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:25.089Z,1516717585.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:25.128Z,1516717585.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:25.513Z,1516717585.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:25.569Z,1516717585.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:25.928Z,1516717585.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:25.973Z,1516717585.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:26.278Z,1516717586.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:26.337Z,1516717586.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:26.678Z,1516717586.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:26.718Z,1516717586.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:27.078Z,1516717587.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:27.133Z,1516717587.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:27.491Z,1516717587.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:27.536Z,1516717587.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:27.910Z,1516717587.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:27.938Z,1516717587.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:28.297Z,1516717588.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:28.329Z,1516717588.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:28.689Z,1516717588.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:28.740Z,1516717588.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:29.097Z,1516717589.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:29.129Z,1516717589.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:29.485Z,1516717589.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:29.509Z,1516717589.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:29.883Z,1516717589.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:29.930Z,1516717589.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:30.286Z,1516717590.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:30.306Z,1516717590.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:30.686Z,1516717590.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:30.705Z,1516717590.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:31.093Z,1516717591.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:31.151Z,1516717591.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:31.496Z,1516717591.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:31.517Z,1516717591.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:31.898Z,1516717591.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:31.925Z,1516717591.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:32.274Z,1516717592.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:32.332Z,1516717592.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:32.678Z,1516717592.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:32.716Z,1516717592.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:33.078Z,1516717593.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:33.118Z,1516717593.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:33.475Z,1516717593.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:33.532Z,1516717593.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:33.903Z,1516717593.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:33.965Z,1516717593.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:34.290Z,1516717594.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:34.324Z,1516717594.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:34.697Z,1516717594.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:34.730Z,1516717594.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:35.128Z,1516717595.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:35.182Z,1516717595.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:35.491Z,1516717595.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:35.534Z,1516717595.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:35.882Z,1516717595.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:35.904Z,1516717595.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:36.283Z,1516717596.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:36.298Z,1516717596.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:36.682Z,1516717596.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:36.697Z,1516717596.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:37.083Z,1516717597.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:37.099Z,1516717597.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:37.488Z,1516717597.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:37.503Z,1516717597.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:37.896Z,1516717597.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:37.927Z,1516717597.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:38.284Z,1516717598.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:38.299Z,1516717598.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:38.677Z,1516717598.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:38.706Z,1516717598.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:39.086Z,1516717599.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:39.106Z,1516717599.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:39.484Z,1516717599.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:39.499Z,1516717599.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:39.885Z,1516717599.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:39.901Z,1516717599.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:40.264Z,1516717600.264 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:26:40.264Z,1516717600.264 [NAL9602] Data Fault, FailCount= 1 2018-01-23T14:26:40.264Z,1516717600.264 [NAL9602](ERROR): Data Fault 2018-01-23T14:26:40.292Z,1516717600.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:40.320Z,1516717600.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:40.345Z,1516717600.345 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:26:40.656Z,1516717600.656 [NAL9602](INFO): Powering down 2018-01-23T14:26:40.674Z,1516717600.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:40.718Z,1516717600.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:41.070Z,1516717601.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:41.107Z,1516717601.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:41.473Z,1516717601.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:41.509Z,1516717601.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:41.522Z,1516717601.522 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:26:41.523Z,1516717601.523 [NAL9602] No Fault, FailCount= 1 2018-01-23T14:26:41.873Z,1516717601.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:41.909Z,1516717601.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:42.269Z,1516717602.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:42.301Z,1516717602.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:42.694Z,1516717602.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:42.839Z,1516717602.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:43.069Z,1516717603.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:43.105Z,1516717603.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:43.469Z,1516717603.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:43.498Z,1516717603.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:43.872Z,1516717603.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:43.909Z,1516717603.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:44.276Z,1516717604.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:44.312Z,1516717604.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:44.680Z,1516717604.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:44.707Z,1516717604.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:45.072Z,1516717605.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:45.109Z,1516717605.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:45.476Z,1516717605.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:45.491Z,1516717605.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:45.884Z,1516717605.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:45.899Z,1516717605.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:46.278Z,1516717606.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:46.304Z,1516717606.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:46.681Z,1516717606.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:46.696Z,1516717606.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:47.077Z,1516717607.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:47.092Z,1516717607.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:47.478Z,1516717607.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:47.502Z,1516717607.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:47.879Z,1516717607.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:47.894Z,1516717607.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:48.277Z,1516717608.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:48.293Z,1516717608.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:48.676Z,1516717608.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:48.699Z,1516717608.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:49.080Z,1516717609.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:49.095Z,1516717609.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:49.477Z,1516717609.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:49.492Z,1516717609.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:49.874Z,1516717609.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:49.901Z,1516717609.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:50.280Z,1516717610.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:50.295Z,1516717610.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:50.754Z,1516717610.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:50.769Z,1516717610.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:51.072Z,1516717611.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:51.105Z,1516717611.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:51.472Z,1516717611.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:51.498Z,1516717611.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:51.884Z,1516717611.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:51.899Z,1516717611.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:52.272Z,1516717612.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:52.305Z,1516717612.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:52.683Z,1516717612.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:52.698Z,1516717612.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:53.069Z,1516717613.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:53.101Z,1516717613.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:53.476Z,1516717613.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:53.502Z,1516717613.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:53.872Z,1516717613.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:53.905Z,1516717613.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:54.270Z,1516717614.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:54.297Z,1516717614.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:54.676Z,1516717614.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:54.702Z,1516717614.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:55.072Z,1516717615.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:55.108Z,1516717615.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:55.469Z,1516717615.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:55.493Z,1516717615.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:55.872Z,1516717615.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:55.905Z,1516717615.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:56.276Z,1516717616.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:56.311Z,1516717616.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:56.672Z,1516717616.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:56.687Z,1516717616.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:57.083Z,1516717617.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:57.098Z,1516717617.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:57.476Z,1516717617.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:57.491Z,1516717617.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:57.877Z,1516717617.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:57.892Z,1516717617.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:58.284Z,1516717618.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:58.321Z,1516717618.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:58.679Z,1516717618.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:58.693Z,1516717618.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:59.076Z,1516717619.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:59.091Z,1516717619.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:59.478Z,1516717619.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:59.496Z,1516717619.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:26:59.879Z,1516717619.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:26:59.893Z,1516717619.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:00.277Z,1516717620.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:00.292Z,1516717620.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:00.677Z,1516717620.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:00.696Z,1516717620.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:01.079Z,1516717621.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:01.100Z,1516717621.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:01.477Z,1516717621.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:01.492Z,1516717621.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:01.876Z,1516717621.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:01.897Z,1516717621.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:02.280Z,1516717622.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:02.294Z,1516717622.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:02.680Z,1516717622.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:02.695Z,1516717622.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:03.074Z,1516717623.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:03.101Z,1516717623.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:03.484Z,1516717623.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:03.498Z,1516717623.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:03.877Z,1516717623.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:03.892Z,1516717623.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:04.274Z,1516717624.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:04.307Z,1516717624.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:04.680Z,1516717624.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:04.694Z,1516717624.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:05.080Z,1516717625.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:05.095Z,1516717625.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:05.474Z,1516717625.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:05.507Z,1516717625.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:05.880Z,1516717625.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:05.894Z,1516717625.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:06.280Z,1516717626.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:06.295Z,1516717626.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:06.674Z,1516717626.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:06.706Z,1516717626.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:07.080Z,1516717627.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:07.094Z,1516717627.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:07.477Z,1516717627.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:07.492Z,1516717627.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:07.874Z,1516717627.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:07.907Z,1516717627.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:08.280Z,1516717628.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:08.294Z,1516717628.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:08.680Z,1516717628.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:08.695Z,1516717628.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:09.075Z,1516717629.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:09.098Z,1516717629.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:09.479Z,1516717629.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:09.494Z,1516717629.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:09.880Z,1516717629.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:09.895Z,1516717629.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:10.275Z,1516717630.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:10.297Z,1516717630.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:10.660Z,1516717630.660 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:27:10.690Z,1516717630.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:10.705Z,1516717630.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:11.080Z,1516717631.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:11.095Z,1516717631.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:11.098Z,1516717631.098 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:27:11.098Z,1516717631.098 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:27:11.098Z,1516717631.098 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:27:11.099Z,1516717631.099 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:27:11.474Z,1516717631.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:11.508Z,1516717631.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:11.511Z,1516717631.511 [Default:CheckIn:D] Stopped 2018-01-23T14:27:11.511Z,1516717631.511 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:27:11.880Z,1516717631.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:11.895Z,1516717631.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:11.898Z,1516717631.898 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 669.324219 min 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn:E] Stopped 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn] Stopped 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn](INFO): Running loop #66 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn] Running Loop=66 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:27:11.899Z,1516717631.899 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:27:12.280Z,1516717632.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:12.300Z,1516717632.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:15.378Z,1516717635.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:15.393Z,1516717635.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:15.495Z,1516717635.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:15.538Z,1516717635.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:15.840Z,1516717635.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:15.871Z,1516717635.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:16.245Z,1516717636.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:16.265Z,1516717636.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:16.647Z,1516717636.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:16.669Z,1516717636.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:17.043Z,1516717637.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:17.070Z,1516717637.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:17.442Z,1516717637.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:17.457Z,1516717637.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:17.845Z,1516717637.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:17.860Z,1516717637.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:18.244Z,1516717638.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:18.259Z,1516717638.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:18.644Z,1516717638.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:18.660Z,1516717638.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:19.044Z,1516717639.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:19.059Z,1516717639.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:19.444Z,1516717639.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:19.458Z,1516717639.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:19.844Z,1516717639.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:19.859Z,1516717639.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:20.244Z,1516717640.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:20.259Z,1516717640.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:20.644Z,1516717640.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:20.658Z,1516717640.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:20.660Z,1516717640.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:20.661Z,1516717640.661 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 223 2018-01-23T14:27:20.661Z,1516717640.661 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:27:20.673Z,1516717640.673 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:27:21.044Z,1516717641.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:21.059Z,1516717641.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:21.071Z,1516717641.071 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:27:21.071Z,1516717641.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 223 2018-01-23T14:27:21.454Z,1516717641.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:21.469Z,1516717641.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:21.470Z,1516717641.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:27:21.470Z,1516717641.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:27:21.471Z,1516717641.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:27:21.820Z,1516717641.820 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:27:21.840Z,1516717641.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:21.876Z,1516717641.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:22.248Z,1516717642.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:22.263Z,1516717642.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:22.659Z,1516717642.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:22.674Z,1516717642.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:23.058Z,1516717643.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:23.073Z,1516717643.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:23.455Z,1516717643.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:23.476Z,1516717643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:23.837Z,1516717643.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:23.873Z,1516717643.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:24.240Z,1516717644.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:24.266Z,1516717644.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:24.637Z,1516717644.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:24.669Z,1516717644.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:25.040Z,1516717645.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:25.067Z,1516717645.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:25.455Z,1516717645.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:25.470Z,1516717645.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:25.859Z,1516717645.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:25.873Z,1516717645.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:26.257Z,1516717646.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:26.272Z,1516717646.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:26.636Z,1516717646.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:26.672Z,1516717646.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:27.036Z,1516717647.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:27.073Z,1516717647.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:27.073Z,1516717647.073 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 223 2018-01-23T14:27:27.073Z,1516717647.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:27:27.075Z,1516717647.075 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:27.075Z,1516717647.075 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 223 2018-01-23T14:27:27.075Z,1516717647.075 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:27:27.087Z,1516717647.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:27:27.088Z,1516717647.088 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:27:27.436Z,1516717647.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:27.487Z,1516717647.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:27:27.487Z,1516717647.487 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 223 2018-01-23T14:27:27.487Z,1516717647.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:27:27.487Z,1516717647.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 223 2018-01-23T14:27:27.837Z,1516717647.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:27.851Z,1516717647.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:27:27.852Z,1516717647.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:27:27.852Z,1516717647.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:27:27.852Z,1516717647.852 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:27:27.853Z,1516717647.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:27:27.853Z,1516717647.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:27:28.240Z,1516717648.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:28.254Z,1516717648.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:27:28.255Z,1516717648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:28.659Z,1516717648.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:28.684Z,1516717648.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:27:28.685Z,1516717648.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:29.063Z,1516717649.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:29.092Z,1516717649.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:27:29.093Z,1516717649.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:29.459Z,1516717649.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:29.484Z,1516717649.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:27:29.484Z,1516717649.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:29.844Z,1516717649.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:29.859Z,1516717649.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:27:29.860Z,1516717649.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:30.245Z,1516717650.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:30.272Z,1516717650.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:27:30.273Z,1516717650.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:30.645Z,1516717650.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:30.659Z,1516717650.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:27:30.660Z,1516717650.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:31.045Z,1516717651.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:31.059Z,1516717651.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:27:31.060Z,1516717651.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:31.450Z,1516717651.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:31.476Z,1516717651.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:27:31.477Z,1516717651.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:31.857Z,1516717651.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:31.872Z,1516717651.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:27:31.872Z,1516717651.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:32.258Z,1516717652.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:32.273Z,1516717652.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:27:32.274Z,1516717652.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:32.640Z,1516717652.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:32.662Z,1516717652.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:27:32.663Z,1516717652.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:33.045Z,1516717653.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:33.064Z,1516717653.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:27:33.065Z,1516717653.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:33.443Z,1516717653.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:33.463Z,1516717653.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:27:33.464Z,1516717653.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:33.840Z,1516717653.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:33.872Z,1516717653.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:27:33.872Z,1516717653.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:34.244Z,1516717654.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:34.258Z,1516717654.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:27:34.259Z,1516717654.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:34.655Z,1516717654.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:34.672Z,1516717654.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:27:34.673Z,1516717654.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:35.058Z,1516717655.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:35.076Z,1516717655.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:27:35.077Z,1516717655.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:35.454Z,1516717655.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:35.468Z,1516717655.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:27:35.469Z,1516717655.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:35.837Z,1516717655.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:35.872Z,1516717655.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:27:35.873Z,1516717655.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:36.236Z,1516717656.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:36.268Z,1516717656.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:27:36.269Z,1516717656.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:36.637Z,1516717656.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:36.669Z,1516717656.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:27:36.669Z,1516717656.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:37.037Z,1516717657.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:37.067Z,1516717657.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:27:37.068Z,1516717657.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:37.459Z,1516717657.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:37.474Z,1516717657.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:27:37.475Z,1516717657.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:37.859Z,1516717657.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:37.874Z,1516717657.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:27:37.875Z,1516717657.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:38.247Z,1516717658.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:38.284Z,1516717658.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:27:38.285Z,1516717658.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:38.640Z,1516717658.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:38.676Z,1516717658.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:27:38.677Z,1516717658.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:39.036Z,1516717659.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:39.080Z,1516717659.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:27:39.081Z,1516717659.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:39.441Z,1516717659.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:39.477Z,1516717659.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:27:39.478Z,1516717659.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:39.837Z,1516717659.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:39.852Z,1516717659.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:27:39.853Z,1516717659.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:40.236Z,1516717660.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:40.250Z,1516717660.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:27:40.251Z,1516717660.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:40.661Z,1516717660.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:40.692Z,1516717660.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:27:40.693Z,1516717660.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:41.072Z,1516717661.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:41.086Z,1516717661.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:27:41.087Z,1516717661.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:41.451Z,1516717661.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:41.488Z,1516717661.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:27:41.489Z,1516717661.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:41.845Z,1516717661.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:41.880Z,1516717661.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:27:41.881Z,1516717661.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:42.245Z,1516717662.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:42.264Z,1516717662.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:27:42.265Z,1516717662.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:42.643Z,1516717662.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:42.658Z,1516717662.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:27:42.659Z,1516717662.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:43.041Z,1516717663.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:43.068Z,1516717663.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:27:43.069Z,1516717663.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:43.459Z,1516717663.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:43.474Z,1516717663.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:27:43.495Z,1516717663.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:43.855Z,1516717663.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:43.869Z,1516717663.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:27:43.870Z,1516717663.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:44.252Z,1516717664.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:44.266Z,1516717664.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:27:44.267Z,1516717664.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:44.644Z,1516717664.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:44.659Z,1516717664.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:27:44.660Z,1516717664.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:45.044Z,1516717665.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:45.058Z,1516717665.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:27:45.059Z,1516717665.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:45.446Z,1516717665.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:45.460Z,1516717665.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:27:45.461Z,1516717665.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:45.844Z,1516717665.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:45.862Z,1516717665.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:27:45.863Z,1516717665.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:46.242Z,1516717666.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:46.268Z,1516717666.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:27:46.269Z,1516717666.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:46.651Z,1516717666.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:46.665Z,1516717666.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:27:46.666Z,1516717666.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:47.051Z,1516717667.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:47.066Z,1516717667.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:27:47.067Z,1516717667.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:47.450Z,1516717667.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:47.472Z,1516717667.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:47.846Z,1516717667.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:47.861Z,1516717667.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:48.244Z,1516717668.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:48.262Z,1516717668.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:48.648Z,1516717668.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:48.663Z,1516717668.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:49.049Z,1516717669.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:49.064Z,1516717669.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:49.463Z,1516717669.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:49.478Z,1516717669.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:49.852Z,1516717669.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:49.872Z,1516717669.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:50.252Z,1516717670.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:50.273Z,1516717670.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:50.651Z,1516717670.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:50.666Z,1516717670.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:51.047Z,1516717671.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:51.062Z,1516717671.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:51.448Z,1516717671.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:51.463Z,1516717671.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:51.854Z,1516717671.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:51.869Z,1516717671.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:52.252Z,1516717672.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:52.268Z,1516717672.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:52.653Z,1516717672.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:52.676Z,1516717672.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:53.059Z,1516717673.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:53.075Z,1516717673.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:53.457Z,1516717673.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:53.473Z,1516717673.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:53.841Z,1516717673.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:53.872Z,1516717673.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:54.240Z,1516717674.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:54.264Z,1516717674.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:54.641Z,1516717674.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:54.660Z,1516717674.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:55.035Z,1516717675.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:55.051Z,1516717675.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:55.460Z,1516717675.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:55.485Z,1516717675.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:55.864Z,1516717675.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:55.890Z,1516717675.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:56.251Z,1516717676.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:56.275Z,1516717676.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:56.642Z,1516717676.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:56.661Z,1516717676.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:57.045Z,1516717677.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:57.060Z,1516717677.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:57.441Z,1516717677.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:57.457Z,1516717677.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:57.848Z,1516717677.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:57.863Z,1516717677.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:58.243Z,1516717678.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:58.258Z,1516717678.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:58.647Z,1516717678.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:58.662Z,1516717678.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:59.051Z,1516717679.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:59.066Z,1516717679.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:59.447Z,1516717679.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:59.468Z,1516717679.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:27:59.845Z,1516717679.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:27:59.860Z,1516717679.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:00.244Z,1516717680.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:00.259Z,1516717680.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:00.645Z,1516717680.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:00.659Z,1516717680.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:01.042Z,1516717681.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:01.057Z,1516717681.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:01.449Z,1516717681.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:01.469Z,1516717681.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:01.855Z,1516717681.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:01.870Z,1516717681.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:02.250Z,1516717682.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:02.265Z,1516717682.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:02.641Z,1516717682.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:02.662Z,1516717682.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:03.044Z,1516717683.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:03.064Z,1516717683.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:03.445Z,1516717683.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:03.461Z,1516717683.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:03.844Z,1516717683.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:03.862Z,1516717683.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:04.244Z,1516717684.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:04.265Z,1516717684.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:04.651Z,1516717684.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:04.666Z,1516717684.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:05.051Z,1516717685.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:05.066Z,1516717685.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:05.449Z,1516717685.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:05.464Z,1516717685.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:05.845Z,1516717685.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:05.860Z,1516717685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:06.244Z,1516717686.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:06.259Z,1516717686.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:06.645Z,1516717686.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:06.659Z,1516717686.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:07.045Z,1516717687.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:07.060Z,1516717687.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:07.451Z,1516717687.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:07.466Z,1516717687.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:07.851Z,1516717687.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:07.866Z,1516717687.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:08.250Z,1516717688.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:08.265Z,1516717688.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:08.644Z,1516717688.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:08.659Z,1516717688.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:09.044Z,1516717689.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:09.059Z,1516717689.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:09.445Z,1516717689.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:09.460Z,1516717689.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:09.841Z,1516717689.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:09.865Z,1516717689.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:10.244Z,1516717690.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:10.264Z,1516717690.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:10.650Z,1516717690.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:10.666Z,1516717690.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:11.051Z,1516717691.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:11.066Z,1516717691.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:11.449Z,1516717691.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:11.468Z,1516717691.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:11.849Z,1516717691.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:11.864Z,1516717691.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:12.241Z,1516717692.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:12.268Z,1516717692.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:12.650Z,1516717692.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:12.698Z,1516717692.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:15.741Z,1516717695.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:15.757Z,1516717695.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:15.871Z,1516717695.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:15.908Z,1516717695.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:16.216Z,1516717696.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:16.230Z,1516717696.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:16.623Z,1516717696.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:16.654Z,1516717696.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:17.010Z,1516717697.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:17.025Z,1516717697.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:17.408Z,1516717697.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:17.423Z,1516717697.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:17.810Z,1516717697.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:17.825Z,1516717697.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:18.210Z,1516717698.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:18.225Z,1516717698.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:18.612Z,1516717698.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:18.627Z,1516717698.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:19.015Z,1516717699.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:19.030Z,1516717699.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:19.412Z,1516717699.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:19.427Z,1516717699.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:19.806Z,1516717699.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:19.829Z,1516717699.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:20.210Z,1516717700.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:20.224Z,1516717700.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:20.607Z,1516717700.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:20.622Z,1516717700.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:21.007Z,1516717701.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:21.030Z,1516717701.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:21.415Z,1516717701.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:21.430Z,1516717701.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:21.818Z,1516717701.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:21.833Z,1516717701.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:22.214Z,1516717702.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:22.241Z,1516717702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:22.614Z,1516717702.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:22.629Z,1516717702.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:23.013Z,1516717703.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:23.033Z,1516717703.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:23.420Z,1516717703.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:23.435Z,1516717703.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:23.823Z,1516717703.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:23.838Z,1516717703.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:24.224Z,1516717704.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:24.239Z,1516717704.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:24.609Z,1516717704.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:24.630Z,1516717704.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:25.012Z,1516717705.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:25.026Z,1516717705.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:25.417Z,1516717705.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:25.445Z,1516717705.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:25.827Z,1516717705.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:25.842Z,1516717705.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:26.219Z,1516717706.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:26.246Z,1516717706.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:26.601Z,1516717706.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:26.633Z,1516717706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:27.006Z,1516717707.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:27.038Z,1516717707.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:27.401Z,1516717707.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:27.445Z,1516717707.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:27.812Z,1516717707.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:27.841Z,1516717707.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:28.233Z,1516717708.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:28.253Z,1516717708.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:28.629Z,1516717708.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:28.645Z,1516717708.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:28.999Z,1516717708.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:29.014Z,1516717709.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:29.401Z,1516717709.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:29.417Z,1516717709.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:29.810Z,1516717709.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:29.852Z,1516717709.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:30.198Z,1516717710.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:30.214Z,1516717710.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:30.624Z,1516717710.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:30.657Z,1516717710.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:31.020Z,1516717711.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:31.049Z,1516717711.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:31.419Z,1516717711.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:31.457Z,1516717711.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:31.807Z,1516717711.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:31.825Z,1516717711.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:32.212Z,1516717712.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:32.228Z,1516717712.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:32.609Z,1516717712.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:32.625Z,1516717712.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:33.006Z,1516717713.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:33.033Z,1516717713.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:33.415Z,1516717713.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:33.430Z,1516717713.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:33.816Z,1516717713.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:33.830Z,1516717713.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:34.214Z,1516717714.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:34.229Z,1516717714.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:34.605Z,1516717714.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:34.629Z,1516717714.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:35.009Z,1516717715.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:35.024Z,1516717715.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:35.404Z,1516717715.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:35.437Z,1516717715.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:35.819Z,1516717715.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:35.834Z,1516717715.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:36.214Z,1516717716.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:36.241Z,1516717716.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:36.623Z,1516717716.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:36.638Z,1516717716.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:37.007Z,1516717717.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:37.037Z,1516717717.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:37.398Z,1516717717.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:37.434Z,1516717717.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:37.805Z,1516717717.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:37.831Z,1516717717.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:38.200Z,1516717718.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:38.236Z,1516717718.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:38.620Z,1516717718.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:38.635Z,1516717718.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:39.030Z,1516717719.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:39.049Z,1516717719.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:39.420Z,1516717719.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:39.435Z,1516717719.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:39.801Z,1516717719.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:39.827Z,1516717719.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:40.200Z,1516717720.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:40.229Z,1516717720.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:40.600Z,1516717720.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:40.636Z,1516717720.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:40.998Z,1516717720.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:41.029Z,1516717721.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:41.401Z,1516717721.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:41.433Z,1516717721.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:41.818Z,1516717721.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:41.841Z,1516717721.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:42.222Z,1516717722.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:42.237Z,1516717722.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:42.616Z,1516717722.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:42.646Z,1516717722.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:43.000Z,1516717723.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:43.028Z,1516717723.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:43.398Z,1516717723.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:43.426Z,1516717723.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:43.809Z,1516717723.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:43.835Z,1516717723.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:44.200Z,1516717724.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:44.238Z,1516717724.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:44.619Z,1516717724.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:44.635Z,1516717724.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:45.022Z,1516717725.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:45.045Z,1516717725.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:45.428Z,1516717725.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:45.442Z,1516717725.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:45.800Z,1516717725.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:45.833Z,1516717725.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:46.200Z,1516717726.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:46.233Z,1516717726.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:46.600Z,1516717726.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:46.634Z,1516717726.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:47.003Z,1516717727.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:47.030Z,1516717727.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:47.400Z,1516717727.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:47.437Z,1516717727.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:47.811Z,1516717727.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:47.846Z,1516717727.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:48.211Z,1516717728.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:48.237Z,1516717728.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:48.631Z,1516717728.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:48.646Z,1516717728.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:49.004Z,1516717729.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:49.039Z,1516717729.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:49.401Z,1516717729.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:49.421Z,1516717729.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:49.809Z,1516717729.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:49.824Z,1516717729.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:50.212Z,1516717730.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:50.227Z,1516717730.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:50.620Z,1516717730.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:50.655Z,1516717730.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:51.019Z,1516717731.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:51.034Z,1516717731.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:51.411Z,1516717731.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:51.432Z,1516717731.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:51.811Z,1516717731.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:51.826Z,1516717731.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:52.214Z,1516717732.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:52.233Z,1516717732.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:52.610Z,1516717732.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:52.625Z,1516717732.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:53.005Z,1516717733.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:53.028Z,1516717733.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:53.415Z,1516717733.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:53.430Z,1516717733.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:53.819Z,1516717733.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:53.834Z,1516717733.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:54.219Z,1516717734.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:54.234Z,1516717734.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:54.618Z,1516717734.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:54.633Z,1516717734.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:55.012Z,1516717735.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:55.026Z,1516717735.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:55.412Z,1516717735.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:55.427Z,1516717735.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:55.812Z,1516717735.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:55.831Z,1516717735.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:56.209Z,1516717736.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:56.224Z,1516717736.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:56.616Z,1516717736.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:56.643Z,1516717736.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:57.023Z,1516717737.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:57.038Z,1516717737.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:57.423Z,1516717737.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:57.445Z,1516717737.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:57.812Z,1516717737.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:57.833Z,1516717737.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:58.206Z,1516717738.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:58.237Z,1516717738.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:58.612Z,1516717738.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:58.627Z,1516717738.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:59.011Z,1516717739.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:59.030Z,1516717739.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:59.401Z,1516717739.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:59.426Z,1516717739.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:28:59.820Z,1516717739.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:28:59.840Z,1516717739.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:00.223Z,1516717740.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:00.238Z,1516717740.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:00.626Z,1516717740.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:00.641Z,1516717740.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:01.000Z,1516717741.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:01.037Z,1516717741.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:01.407Z,1516717741.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:01.432Z,1516717741.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:01.811Z,1516717741.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:01.826Z,1516717741.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:02.215Z,1516717742.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:02.230Z,1516717742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:02.627Z,1516717742.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:02.642Z,1516717742.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:03.029Z,1516717743.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:03.044Z,1516717743.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:03.421Z,1516717743.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:03.436Z,1516717743.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:03.811Z,1516717743.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:03.831Z,1516717743.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:04.218Z,1516717744.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:04.233Z,1516717744.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:04.601Z,1516717744.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:04.642Z,1516717744.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:05.002Z,1516717745.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:05.033Z,1516717745.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:05.403Z,1516717745.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:05.437Z,1516717745.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:05.829Z,1516717745.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:05.844Z,1516717745.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:06.214Z,1516717746.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:06.250Z,1516717746.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:06.613Z,1516717746.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:06.641Z,1516717746.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:07.003Z,1516717747.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:07.044Z,1516717747.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:07.403Z,1516717747.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:07.418Z,1516717747.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:07.810Z,1516717747.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:07.844Z,1516717747.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:08.211Z,1516717748.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:08.226Z,1516717748.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:08.623Z,1516717748.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:08.651Z,1516717748.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:09.023Z,1516717749.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:09.046Z,1516717749.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:09.425Z,1516717749.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:09.461Z,1516717749.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:09.810Z,1516717749.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:09.825Z,1516717749.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:10.208Z,1516717750.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:10.229Z,1516717750.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:10.611Z,1516717750.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:10.626Z,1516717750.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:11.005Z,1516717751.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:11.029Z,1516717751.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:11.411Z,1516717751.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:11.433Z,1516717751.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:11.819Z,1516717751.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:11.834Z,1516717751.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:12.215Z,1516717752.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:12.231Z,1516717752.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:12.615Z,1516717752.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:12.633Z,1516717752.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:13.013Z,1516717753.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:13.028Z,1516717753.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:16.104Z,1516717756.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:16.120Z,1516717756.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:16.227Z,1516717756.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:16.255Z,1516717756.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:16.583Z,1516717756.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:16.619Z,1516717756.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:16.983Z,1516717756.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:17.021Z,1516717757.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:17.372Z,1516717757.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:17.387Z,1516717757.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:17.764Z,1516717757.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:17.787Z,1516717757.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:18.170Z,1516717758.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:18.185Z,1516717758.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:18.570Z,1516717758.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:18.585Z,1516717758.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:18.969Z,1516717758.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:18.988Z,1516717758.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:19.370Z,1516717759.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:19.384Z,1516717759.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:19.774Z,1516717759.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:19.789Z,1516717759.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:20.175Z,1516717760.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:20.190Z,1516717760.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:20.575Z,1516717760.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:20.596Z,1516717760.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:20.965Z,1516717760.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:20.988Z,1516717760.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:21.374Z,1516717761.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:21.389Z,1516717761.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:21.771Z,1516717761.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:21.792Z,1516717761.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:22.163Z,1516717762.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:22.186Z,1516717762.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:22.578Z,1516717762.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:22.594Z,1516717762.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:22.983Z,1516717762.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:22.997Z,1516717762.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:23.378Z,1516717763.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:23.394Z,1516717763.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:23.768Z,1516717763.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:23.787Z,1516717763.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:24.169Z,1516717764.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:24.188Z,1516717764.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:24.559Z,1516717764.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:24.594Z,1516717764.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:24.966Z,1516717764.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:24.993Z,1516717764.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:25.374Z,1516717765.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:25.389Z,1516717765.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:25.780Z,1516717765.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:25.795Z,1516717765.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:26.182Z,1516717766.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:26.197Z,1516717766.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:26.578Z,1516717766.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:26.610Z,1516717766.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:26.959Z,1516717766.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:26.994Z,1516717766.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:27.369Z,1516717767.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:27.392Z,1516717767.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:27.762Z,1516717767.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:27.798Z,1516717767.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:28.159Z,1516717768.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:28.185Z,1516717768.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:28.580Z,1516717768.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:28.595Z,1516717768.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:28.981Z,1516717768.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:29.019Z,1516717769.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:29.371Z,1516717769.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:29.405Z,1516717769.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:29.761Z,1516717769.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:29.797Z,1516717769.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:30.161Z,1516717770.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:30.198Z,1516717770.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:30.559Z,1516717770.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:30.597Z,1516717770.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:30.962Z,1516717770.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:30.997Z,1516717770.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:31.361Z,1516717771.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:31.375Z,1516717771.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:31.771Z,1516717771.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:31.802Z,1516717771.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:32.194Z,1516717772.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:32.209Z,1516717772.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:32.579Z,1516717772.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:32.608Z,1516717772.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:32.961Z,1516717772.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:32.976Z,1516717772.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:33.372Z,1516717773.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:33.409Z,1516717773.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:33.766Z,1516717773.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:33.793Z,1516717773.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:34.169Z,1516717774.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:34.188Z,1516717774.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:34.582Z,1516717774.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:34.605Z,1516717774.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:34.987Z,1516717774.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:35.001Z,1516717775.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:35.376Z,1516717775.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:35.397Z,1516717775.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:35.762Z,1516717775.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:35.793Z,1516717775.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:36.161Z,1516717776.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:36.200Z,1516717776.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:36.576Z,1516717776.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:36.603Z,1516717776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:36.986Z,1516717776.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:37.009Z,1516717777.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:37.389Z,1516717777.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:37.403Z,1516717777.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:37.761Z,1516717777.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:37.788Z,1516717777.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:38.165Z,1516717778.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:38.202Z,1516717778.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:38.562Z,1516717778.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:38.596Z,1516717778.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:38.966Z,1516717778.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:38.992Z,1516717778.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:39.362Z,1516717779.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:39.401Z,1516717779.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:39.789Z,1516717779.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:39.804Z,1516717779.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:40.180Z,1516717780.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:40.203Z,1516717780.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:40.575Z,1516717780.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:40.602Z,1516717780.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:40.961Z,1516717780.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:40.999Z,1516717780.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:41.359Z,1516717781.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:41.383Z,1516717781.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:41.762Z,1516717781.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:41.798Z,1516717781.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:42.165Z,1516717782.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:42.181Z,1516717782.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:42.571Z,1516717782.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:42.611Z,1516717782.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:42.975Z,1516717782.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:43.015Z,1516717783.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:43.378Z,1516717783.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:43.408Z,1516717783.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:43.764Z,1516717783.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:43.805Z,1516717783.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:44.168Z,1516717784.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:44.209Z,1516717784.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:44.583Z,1516717784.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:44.611Z,1516717784.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:44.976Z,1516717784.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:44.990Z,1516717784.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:45.380Z,1516717785.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:45.394Z,1516717785.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:45.771Z,1516717785.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:45.785Z,1516717785.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:46.164Z,1516717786.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:46.184Z,1516717786.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:46.579Z,1516717786.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:46.598Z,1516717786.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:46.985Z,1516717786.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:46.999Z,1516717786.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:47.376Z,1516717787.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:47.405Z,1516717787.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:47.762Z,1516717787.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:47.794Z,1516717787.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:48.165Z,1516717788.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:48.193Z,1516717788.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:48.575Z,1516717788.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:48.599Z,1516717788.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:48.982Z,1516717788.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:49.007Z,1516717789.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:49.381Z,1516717789.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:49.396Z,1516717789.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:49.762Z,1516717789.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:49.797Z,1516717789.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:50.161Z,1516717790.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:50.184Z,1516717790.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:50.571Z,1516717790.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:50.606Z,1516717790.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:50.983Z,1516717790.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:51.002Z,1516717791.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:51.371Z,1516717791.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:51.415Z,1516717791.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:51.766Z,1516717791.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:51.806Z,1516717791.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:52.159Z,1516717792.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:52.174Z,1516717792.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:52.579Z,1516717792.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:52.606Z,1516717792.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:52.975Z,1516717792.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:53.010Z,1516717793.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:53.371Z,1516717793.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:53.398Z,1516717793.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:53.769Z,1516717793.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:53.784Z,1516717793.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:54.166Z,1516717794.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:54.180Z,1516717794.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:54.579Z,1516717794.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:54.610Z,1516717794.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:54.983Z,1516717794.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:55.014Z,1516717795.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:55.379Z,1516717795.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:55.394Z,1516717795.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:55.771Z,1516717795.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:55.786Z,1516717795.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:56.166Z,1516717796.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:56.185Z,1516717796.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:56.571Z,1516717796.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:56.586Z,1516717796.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:56.972Z,1516717796.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:56.986Z,1516717796.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:57.383Z,1516717797.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:57.398Z,1516717797.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:57.771Z,1516717797.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:57.786Z,1516717797.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:58.165Z,1516717798.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:58.185Z,1516717798.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:58.574Z,1516717798.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:58.589Z,1516717798.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:58.975Z,1516717798.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:58.990Z,1516717798.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:59.374Z,1516717799.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:59.389Z,1516717799.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:29:59.764Z,1516717799.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:29:59.797Z,1516717799.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:00.174Z,1516717800.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:00.189Z,1516717800.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:00.576Z,1516717800.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:00.596Z,1516717800.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:00.978Z,1516717800.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:00.993Z,1516717800.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:01.379Z,1516717801.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:01.394Z,1516717801.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:01.774Z,1516717801.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:01.790Z,1516717801.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:02.165Z,1516717802.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:02.184Z,1516717802.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:02.580Z,1516717802.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:02.595Z,1516717802.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:02.978Z,1516717802.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:02.993Z,1516717802.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:03.382Z,1516717803.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:03.405Z,1516717803.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:03.771Z,1516717803.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:03.792Z,1516717803.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:04.167Z,1516717804.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:04.186Z,1516717804.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:04.578Z,1516717804.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:04.594Z,1516717804.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:04.983Z,1516717804.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:05.004Z,1516717805.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:05.378Z,1516717805.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:05.394Z,1516717805.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:05.766Z,1516717805.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:05.797Z,1516717805.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:06.170Z,1516717806.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:06.185Z,1516717806.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:06.579Z,1516717806.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:06.594Z,1516717806.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:06.983Z,1516717806.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:06.998Z,1516717806.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:07.383Z,1516717807.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:07.398Z,1516717807.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:07.772Z,1516717807.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:07.787Z,1516717807.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:08.165Z,1516717808.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:08.188Z,1516717808.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:08.578Z,1516717808.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:08.601Z,1516717808.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:08.978Z,1516717808.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:08.993Z,1516717808.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:09.378Z,1516717809.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:09.393Z,1516717809.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:09.770Z,1516717809.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:09.803Z,1516717809.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:10.161Z,1516717810.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:10.188Z,1516717810.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:10.576Z,1516717810.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:10.599Z,1516717810.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:10.985Z,1516717810.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:10.000Z,1516717811.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:11.380Z,1516717811.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:11.395Z,1516717811.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:11.762Z,1516717811.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:11.793Z,1516717811.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:12.161Z,1516717812.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:12.197Z,1516717812.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:12.580Z,1516717812.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:12.595Z,1516717812.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:12.982Z,1516717812.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:13.010Z,1516717813.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:13.389Z,1516717813.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:13.404Z,1516717813.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:16.477Z,1516717816.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:16.493Z,1516717816.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:16.597Z,1516717816.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:16.638Z,1516717816.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:16.949Z,1516717816.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:16.964Z,1516717816.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:17.364Z,1516717817.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:17.389Z,1516717817.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:17.761Z,1516717817.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:17.790Z,1516717817.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:18.144Z,1516717818.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:18.161Z,1516717818.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:18.546Z,1516717818.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:18.561Z,1516717818.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:18.944Z,1516717818.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:18.973Z,1516717818.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:19.349Z,1516717819.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:19.365Z,1516717819.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:19.751Z,1516717819.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:19.767Z,1516717819.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:20.156Z,1516717820.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:20.172Z,1516717820.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:20.554Z,1516717820.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:20.570Z,1516717820.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:20.946Z,1516717820.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:20.962Z,1516717820.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:21.340Z,1516717821.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:21.371Z,1516717821.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:21.750Z,1516717821.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:21.773Z,1516717821.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:21.776Z,1516717821.776 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:21.776Z,1516717821.776 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 224 2018-01-23T14:30:21.776Z,1516717821.776 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:30:21.804Z,1516717821.804 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:30:22.137Z,1516717822.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:22.169Z,1516717822.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:22.181Z,1516717822.181 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:30:22.181Z,1516717822.181 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 224 2018-01-23T14:30:22.537Z,1516717822.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:22.573Z,1516717822.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:22.574Z,1516717822.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:30:22.579Z,1516717822.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:30:22.579Z,1516717822.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:30:22.958Z,1516717822.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:22.981Z,1516717822.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:23.362Z,1516717823.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:23.377Z,1516717823.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:23.756Z,1516717823.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:23.790Z,1516717823.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:24.136Z,1516717824.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:24.174Z,1516717824.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:24.536Z,1516717824.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:24.568Z,1516717824.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:24.937Z,1516717824.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:24.953Z,1516717824.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:25.336Z,1516717825.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:25.353Z,1516717825.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:25.755Z,1516717825.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:25.784Z,1516717825.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:26.151Z,1516717826.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:26.182Z,1516717826.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:26.556Z,1516717826.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:26.591Z,1516717826.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:26.944Z,1516717826.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:26.959Z,1516717826.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:27.339Z,1516717827.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:27.362Z,1516717827.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:27.742Z,1516717827.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:27.769Z,1516717827.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:28.146Z,1516717828.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:28.161Z,1516717828.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:28.161Z,1516717828.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 224 2018-01-23T14:30:28.161Z,1516717828.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:30:28.163Z,1516717828.163 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:28.163Z,1516717828.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 224 2018-01-23T14:30:28.163Z,1516717828.163 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:30:28.204Z,1516717828.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:30:28.204Z,1516717828.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:30:28.540Z,1516717828.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:28.592Z,1516717828.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:30:28.592Z,1516717828.592 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 224 2018-01-23T14:30:28.593Z,1516717828.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:30:28.593Z,1516717828.593 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 224 2018-01-23T14:30:28.953Z,1516717828.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:28.972Z,1516717828.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:30:28.972Z,1516717828.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:30:28.973Z,1516717828.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:30:28.973Z,1516717828.973 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:30:28.973Z,1516717828.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:30:28.974Z,1516717828.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:30:29.355Z,1516717829.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:29.369Z,1516717829.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:30:29.370Z,1516717829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:29.754Z,1516717829.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:29.769Z,1516717829.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:30:29.770Z,1516717829.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:30.144Z,1516717830.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:30.161Z,1516717830.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:30:30.162Z,1516717830.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:30.545Z,1516717830.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:30.560Z,1516717830.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:30:30.561Z,1516717830.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:30.944Z,1516717830.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:30.967Z,1516717830.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:30:30.968Z,1516717830.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:31.340Z,1516717831.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:31.362Z,1516717831.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:30:31.367Z,1516717831.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:31.756Z,1516717831.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:31.771Z,1516717831.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:30:31.772Z,1516717831.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:32.159Z,1516717832.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:32.174Z,1516717832.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:30:32.175Z,1516717832.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:32.552Z,1516717832.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:32.576Z,1516717832.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:30:32.577Z,1516717832.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:32.940Z,1516717832.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:32.969Z,1516717832.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:30:32.970Z,1516717832.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:33.334Z,1516717833.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:33.365Z,1516717833.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:30:33.366Z,1516717833.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:33.736Z,1516717833.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:33.777Z,1516717833.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:30:33.777Z,1516717833.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:34.137Z,1516717834.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:34.170Z,1516717834.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:30:34.171Z,1516717834.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:34.534Z,1516717834.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:34.557Z,1516717834.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:30:34.558Z,1516717834.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:34.948Z,1516717834.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:34.983Z,1516717834.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:30:34.984Z,1516717834.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:35.360Z,1516717835.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:35.375Z,1516717835.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:30:35.376Z,1516717835.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:35.748Z,1516717835.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:35.783Z,1516717835.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:30:35.784Z,1516717835.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:36.140Z,1516717836.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:36.172Z,1516717836.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:30:36.173Z,1516717836.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:36.536Z,1516717836.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:36.577Z,1516717836.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:30:36.578Z,1516717836.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:36.941Z,1516717836.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:36.972Z,1516717836.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:30:36.973Z,1516717836.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:37.337Z,1516717837.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:37.369Z,1516717837.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:30:37.370Z,1516717837.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:37.748Z,1516717837.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:37.778Z,1516717837.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:30:37.779Z,1516717837.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:38.151Z,1516717838.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:38.177Z,1516717838.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:30:38.178Z,1516717838.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:38.548Z,1516717838.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:38.579Z,1516717838.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:30:38.580Z,1516717838.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:38.944Z,1516717838.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:38.959Z,1516717838.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:30:38.960Z,1516717838.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:39.335Z,1516717839.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:39.350Z,1516717839.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:30:39.352Z,1516717839.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:39.749Z,1516717839.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:39.783Z,1516717839.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:30:39.784Z,1516717839.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:40.150Z,1516717840.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:40.188Z,1516717840.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:30:40.189Z,1516717840.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:40.537Z,1516717840.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:40.553Z,1516717840.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:30:40.554Z,1516717840.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:40.956Z,1516717840.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:40.991Z,1516717840.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:30:40.992Z,1516717840.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:41.359Z,1516717841.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:41.390Z,1516717841.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:30:41.391Z,1516717841.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:41.748Z,1516717841.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:41.763Z,1516717841.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:30:41.764Z,1516717841.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:42.144Z,1516717842.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:42.159Z,1516717842.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:30:42.160Z,1516717842.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:42.543Z,1516717842.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:42.558Z,1516717842.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:30:42.559Z,1516717842.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:42.942Z,1516717842.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:42.965Z,1516717842.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:30:42.966Z,1516717842.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:43.344Z,1516717843.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:43.364Z,1516717843.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:30:43.365Z,1516717843.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:43.751Z,1516717843.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:43.772Z,1516717843.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:30:43.773Z,1516717843.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:44.150Z,1516717844.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:44.172Z,1516717844.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:30:44.173Z,1516717844.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:44.552Z,1516717844.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:44.566Z,1516717844.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:30:44.568Z,1516717844.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:44.945Z,1516717844.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:44.968Z,1516717844.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:30:44.969Z,1516717844.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:45.342Z,1516717845.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:45.358Z,1516717845.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:30:45.359Z,1516717845.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:45.740Z,1516717845.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:45.772Z,1516717845.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:30:45.773Z,1516717845.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:46.151Z,1516717846.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:46.166Z,1516717846.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:30:46.167Z,1516717846.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:46.540Z,1516717846.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:46.572Z,1516717846.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:30:46.573Z,1516717846.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:46.959Z,1516717846.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:46.973Z,1516717846.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:30:46.974Z,1516717846.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:47.359Z,1516717847.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:47.374Z,1516717847.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:30:47.375Z,1516717847.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:47.754Z,1516717847.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:47.781Z,1516717847.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:30:47.782Z,1516717847.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:48.140Z,1516717848.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:48.167Z,1516717848.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:48.537Z,1516717848.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:48.573Z,1516717848.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:48.941Z,1516717848.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:48.968Z,1516717848.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:49.335Z,1516717849.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:49.369Z,1516717849.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:49.761Z,1516717849.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:49.777Z,1516717849.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:50.160Z,1516717850.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:50.175Z,1516717850.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:50.548Z,1516717850.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:50.589Z,1516717850.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:50.941Z,1516717850.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:50.975Z,1516717850.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:51.337Z,1516717851.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:51.369Z,1516717851.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:51.736Z,1516717851.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:51.753Z,1516717851.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:52.146Z,1516717852.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:52.162Z,1516717852.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:52.542Z,1516717852.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:52.558Z,1516717852.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:52.952Z,1516717852.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:52.984Z,1516717852.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:53.356Z,1516717853.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:53.383Z,1516717853.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:53.756Z,1516717853.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:53.783Z,1516717853.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:54.145Z,1516717854.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:54.169Z,1516717854.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:54.544Z,1516717854.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:54.569Z,1516717854.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:54.948Z,1516717854.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:54.963Z,1516717854.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:55.342Z,1516717855.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:55.369Z,1516717855.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:55.761Z,1516717855.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:55.781Z,1516717855.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:56.160Z,1516717856.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:56.181Z,1516717856.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:56.561Z,1516717856.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:56.576Z,1516717856.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:56.937Z,1516717856.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:56.980Z,1516717856.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:57.341Z,1516717857.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:57.377Z,1516717857.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:57.736Z,1516717857.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:57.766Z,1516717857.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:58.137Z,1516717858.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:58.178Z,1516717858.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:58.540Z,1516717858.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:58.573Z,1516717858.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:58.955Z,1516717858.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:58.978Z,1516717858.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:59.353Z,1516717859.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:59.390Z,1516717859.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:30:59.765Z,1516717859.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:30:59.781Z,1516717859.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:00.137Z,1516717860.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:00.169Z,1516717860.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:00.537Z,1516717860.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:00.553Z,1516717860.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:00.938Z,1516717860.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:00.954Z,1516717860.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:01.346Z,1516717861.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:01.361Z,1516717861.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:01.757Z,1516717861.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:01.793Z,1516717861.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:02.161Z,1516717862.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:02.190Z,1516717862.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:02.553Z,1516717862.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:02.568Z,1516717862.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:02.944Z,1516717862.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:02.961Z,1516717862.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:03.343Z,1516717863.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:03.360Z,1516717863.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:03.743Z,1516717863.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:03.759Z,1516717863.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:04.145Z,1516717864.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:04.164Z,1516717864.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:04.543Z,1516717864.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:04.559Z,1516717864.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:04.948Z,1516717864.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:04.963Z,1516717864.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:05.351Z,1516717865.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:05.366Z,1516717865.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:05.748Z,1516717865.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:05.763Z,1516717865.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:06.143Z,1516717866.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:06.159Z,1516717866.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:06.544Z,1516717866.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:06.565Z,1516717866.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:06.946Z,1516717866.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:06.962Z,1516717866.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:07.343Z,1516717867.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:07.373Z,1516717867.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:07.751Z,1516717867.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:07.766Z,1516717867.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:08.156Z,1516717868.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:08.171Z,1516717868.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:08.549Z,1516717868.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:08.569Z,1516717868.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:08.949Z,1516717868.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:08.964Z,1516717868.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:09.344Z,1516717869.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:09.365Z,1516717869.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:09.750Z,1516717869.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:09.765Z,1516717869.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:10.146Z,1516717870.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:10.161Z,1516717870.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:10.544Z,1516717870.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:10.559Z,1516717870.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:10.950Z,1516717870.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:10.965Z,1516717870.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:11.351Z,1516717871.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:11.365Z,1516717871.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:11.750Z,1516717871.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:11.765Z,1516717871.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:12.144Z,1516717872.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:12.165Z,1516717872.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:12.545Z,1516717872.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:12.561Z,1516717872.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:12.941Z,1516717872.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:12.964Z,1516717872.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:13.344Z,1516717873.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:13.365Z,1516717873.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:13.751Z,1516717873.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:13.766Z,1516717873.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:19.084Z,1516717879.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:19.120Z,1516717879.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:19.225Z,1516717879.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:19.249Z,1516717879.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:19.611Z,1516717879.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:19.626Z,1516717879.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:20.013Z,1516717880.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:20.058Z,1516717880.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:20.407Z,1516717880.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:20.426Z,1516717880.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:20.813Z,1516717880.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:20.863Z,1516717880.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:21.218Z,1516717881.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:21.237Z,1516717881.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:21.628Z,1516717881.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:21.684Z,1516717881.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:21.000Z,1516717882.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:22.064Z,1516717882.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:22.394Z,1516717882.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:22.438Z,1516717882.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:22.825Z,1516717882.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:22.849Z,1516717882.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:23.225Z,1516717883.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:23.275Z,1516717883.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:23.596Z,1516717883.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:23.635Z,1516717883.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:24.013Z,1516717884.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:24.057Z,1516717884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:24.412Z,1516717884.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:24.487Z,1516717884.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:24.813Z,1516717884.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:24.846Z,1516717884.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:25.206Z,1516717885.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:25.249Z,1516717885.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:25.604Z,1516717885.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:25.663Z,1516717885.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:26.004Z,1516717886.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:26.048Z,1516717886.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:26.400Z,1516717886.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:26.429Z,1516717886.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:26.813Z,1516717886.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:26.865Z,1516717886.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:27.212Z,1516717887.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:27.258Z,1516717887.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:27.613Z,1516717887.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:27.636Z,1516717887.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:27.990Z,1516717887.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:28.021Z,1516717888.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:28.395Z,1516717888.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:28.437Z,1516717888.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:28.794Z,1516717888.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:28.842Z,1516717888.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:29.195Z,1516717889.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:29.254Z,1516717889.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:29.597Z,1516717889.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:29.622Z,1516717889.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:30.030Z,1516717890.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:30.063Z,1516717890.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:30.412Z,1516717890.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:30.472Z,1516717890.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:30.810Z,1516717890.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:30.840Z,1516717890.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:31.194Z,1516717891.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:31.268Z,1516717891.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:31.588Z,1516717891.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:31.628Z,1516717891.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:31.993Z,1516717891.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:32.019Z,1516717892.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:32.388Z,1516717892.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:32.414Z,1516717892.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:32.806Z,1516717892.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:32.830Z,1516717892.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:33.208Z,1516717893.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:33.228Z,1516717893.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:33.603Z,1516717893.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:33.643Z,1516717893.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:33.988Z,1516717893.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:34.023Z,1516717894.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:34.386Z,1516717894.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:34.409Z,1516717894.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:34.788Z,1516717894.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:34.828Z,1516717894.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:35.189Z,1516717895.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:35.226Z,1516717895.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:35.586Z,1516717895.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:35.601Z,1516717895.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:35.999Z,1516717895.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:36.030Z,1516717896.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:36.403Z,1516717896.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:36.441Z,1516717896.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:36.799Z,1516717896.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:36.825Z,1516717896.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:37.188Z,1516717897.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:37.225Z,1516717897.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:37.588Z,1516717897.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:37.603Z,1516717897.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:37.993Z,1516717897.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:38.009Z,1516717898.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:38.393Z,1516717898.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:38.408Z,1516717898.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:38.803Z,1516717898.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:38.818Z,1516717898.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:39.203Z,1516717899.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:39.218Z,1516717899.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:39.601Z,1516717899.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:39.623Z,1516717899.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:40.001Z,1516717900.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:40.016Z,1516717900.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:40.392Z,1516717900.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:40.412Z,1516717900.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:40.796Z,1516717900.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:40.811Z,1516717900.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:41.198Z,1516717901.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:41.212Z,1516717901.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:41.592Z,1516717901.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:41.612Z,1516717901.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:42.001Z,1516717902.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:42.021Z,1516717902.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:42.403Z,1516717902.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:42.418Z,1516717902.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:42.802Z,1516717902.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:42.825Z,1516717902.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:43.196Z,1516717903.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:43.211Z,1516717903.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:43.597Z,1516717903.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:43.616Z,1516717903.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:43.996Z,1516717903.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:44.015Z,1516717904.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:44.396Z,1516717904.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:44.411Z,1516717904.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:44.806Z,1516717904.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:44.829Z,1516717904.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:45.204Z,1516717905.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:45.223Z,1516717905.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:45.604Z,1516717905.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:45.623Z,1516717905.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:45.998Z,1516717905.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:46.021Z,1516717906.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:46.386Z,1516717906.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:46.417Z,1516717906.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:46.788Z,1516717906.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:46.825Z,1516717906.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:47.189Z,1516717907.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:47.228Z,1516717907.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:47.586Z,1516717907.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:47.601Z,1516717907.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:48.011Z,1516717908.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:48.045Z,1516717908.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:48.411Z,1516717908.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:48.438Z,1516717908.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:48.807Z,1516717908.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:48.833Z,1516717908.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:49.201Z,1516717909.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:49.236Z,1516717909.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:49.597Z,1516717909.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:49.616Z,1516717909.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:49.997Z,1516717909.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:50.013Z,1516717910.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:50.394Z,1516717910.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:50.413Z,1516717910.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:50.802Z,1516717910.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:50.817Z,1516717910.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:51.199Z,1516717911.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:51.214Z,1516717911.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:51.599Z,1516717911.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:51.614Z,1516717911.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:51.997Z,1516717911.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:52.011Z,1516717912.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:52.392Z,1516717912.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:52.412Z,1516717912.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:52.796Z,1516717912.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:52.811Z,1516717912.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:53.198Z,1516717913.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:53.212Z,1516717913.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:53.592Z,1516717913.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:53.612Z,1516717913.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:54.002Z,1516717914.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:54.021Z,1516717914.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:54.403Z,1516717914.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:54.418Z,1516717914.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:54.804Z,1516717914.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:54.818Z,1516717914.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:55.197Z,1516717915.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:55.212Z,1516717915.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:55.598Z,1516717915.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:55.613Z,1516717915.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:55.993Z,1516717915.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:56.020Z,1516717916.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:56.397Z,1516717916.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:56.416Z,1516717916.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:56.807Z,1516717916.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:56.822Z,1516717916.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:57.206Z,1516717917.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:57.221Z,1516717917.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:57.619Z,1516717917.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:57.634Z,1516717917.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:58.001Z,1516717918.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:58.015Z,1516717918.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:58.391Z,1516717918.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:58.422Z,1516717918.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:58.793Z,1516717918.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:58.822Z,1516717918.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:59.200Z,1516717919.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:59.215Z,1516717919.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:31:59.589Z,1516717919.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:31:59.626Z,1516717919.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:00.009Z,1516717920.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:00.025Z,1516717920.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:00.414Z,1516717920.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:00.429Z,1516717920.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:00.808Z,1516717920.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:00.835Z,1516717920.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:01.188Z,1516717921.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:01.223Z,1516717921.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:01.591Z,1516717921.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:01.630Z,1516717921.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:01.993Z,1516717921.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:02.032Z,1516717922.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:02.391Z,1516717922.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:02.419Z,1516717922.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:02.809Z,1516717922.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:02.836Z,1516717922.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:03.206Z,1516717923.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:03.231Z,1516717923.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:03.608Z,1516717923.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:03.623Z,1516717923.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:03.990Z,1516717923.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:04.018Z,1516717924.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:04.386Z,1516717924.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:04.414Z,1516717924.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:04.804Z,1516717924.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:04.906Z,1516717924.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:05.211Z,1516717925.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:05.226Z,1516717925.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:05.608Z,1516717925.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:05.630Z,1516717925.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:05.993Z,1516717925.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:06.020Z,1516717926.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:06.388Z,1516717926.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:06.427Z,1516717926.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:06.816Z,1516717926.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:06.833Z,1516717926.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:07.209Z,1516717927.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:07.230Z,1516717927.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:07.608Z,1516717927.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:07.625Z,1516717927.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:07.989Z,1516717927.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:08.020Z,1516717928.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:08.389Z,1516717928.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:08.421Z,1516717928.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:08.803Z,1516717928.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:08.827Z,1516717928.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:09.209Z,1516717929.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:09.228Z,1516717929.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:09.603Z,1516717929.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:09.626Z,1516717929.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:09.989Z,1516717929.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:10.026Z,1516717930.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:10.386Z,1516717930.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:10.409Z,1516717930.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:10.799Z,1516717930.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:10.833Z,1516717930.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:11.213Z,1516717931.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:11.228Z,1516717931.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:11.599Z,1516717931.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:11.633Z,1516717931.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:11.993Z,1516717931.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:12.024Z,1516717932.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:12.032Z,1516717932.032 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:27:11.9Z 2018-01-23T14:32:12.032Z,1516717932.032 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:32:12.032Z,1516717932.032 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:32:12.387Z,1516717932.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:12.402Z,1516717932.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:12.934Z,1516717932.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:12.953Z,1516717932.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:13.219Z,1516717933.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:13.253Z,1516717933.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:16.307Z,1516717936.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:16.332Z,1516717936.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:16.418Z,1516717936.418 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0264.lzma 2018-01-23T14:32:16.483Z,1516717936.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:16.498Z,1516717936.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:16.782Z,1516717936.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:16.818Z,1516717936.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:17.154Z,1516717937.154 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0264.lzma.bak 2018-01-23T14:32:17.154Z,1516717937.154 [DataOverHttps](INFO): SBD MOMSN=7755715 2018-01-23T14:32:17.189Z,1516717937.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:17.218Z,1516717937.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:17.819Z,1516717937.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:17.843Z,1516717937.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:17.988Z,1516717937.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:18.034Z,1516717938.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:21.091Z,1516717941.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:21.106Z,1516717941.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:21.215Z,1516717941.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:21.249Z,1516717941.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:21.560Z,1516717941.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:21.591Z,1516717941.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:21.962Z,1516717941.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:21.992Z,1516717941.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:22.350Z,1516717942.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:22.365Z,1516717942.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:22.771Z,1516717942.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:22.798Z,1516717942.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:25.869Z,1516717945.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:25.894Z,1516717945.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:25.971Z,1516717945.971 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0265.lzma 2018-01-23T14:32:26.008Z,1516717946.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:26.041Z,1516717946.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:26.342Z,1516717946.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:26.362Z,1516717946.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:26.718Z,1516717946.718 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0265.lzma.bak 2018-01-23T14:32:26.718Z,1516717946.718 [DataOverHttps](INFO): SBD MOMSN=7755717 2018-01-23T14:32:26.760Z,1516717946.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:26.783Z,1516717946.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:27.381Z,1516717947.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:27.410Z,1516717947.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:27.413Z,1516717947.413 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:32:27.413Z,1516717947.413 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:32:27.413Z,1516717947.413 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:32:27.537Z,1516717947.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:27.580Z,1516717947.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:30.720Z,1516717950.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:30.735Z,1516717950.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:30.854Z,1516717950.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:30.889Z,1516717950.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:31.220Z,1516717951.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:31.234Z,1516717951.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:31.618Z,1516717951.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:31.633Z,1516717951.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:32.012Z,1516717952.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:32.030Z,1516717952.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:32.412Z,1516717952.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:32.427Z,1516717952.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:32.818Z,1516717952.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:32.834Z,1516717952.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:33.217Z,1516717953.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:33.237Z,1516717953.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:33.620Z,1516717953.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:33.634Z,1516717953.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:34.012Z,1516717954.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:34.033Z,1516717954.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:34.412Z,1516717954.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:34.427Z,1516717954.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:34.817Z,1516717954.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:34.837Z,1516717954.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:35.223Z,1516717955.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:35.238Z,1516717955.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:35.618Z,1516717955.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:35.633Z,1516717955.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:36.014Z,1516717956.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:36.033Z,1516717956.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:36.409Z,1516717956.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:36.447Z,1516717956.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:36.824Z,1516717956.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:36.839Z,1516717956.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:37.224Z,1516717957.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:37.251Z,1516717957.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:37.629Z,1516717957.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:37.649Z,1516717957.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:38.005Z,1516717958.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:38.033Z,1516717958.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:38.410Z,1516717958.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:38.441Z,1516717958.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:38.819Z,1516717958.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:38.849Z,1516717958.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:39.219Z,1516717959.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:39.246Z,1516717959.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:39.616Z,1516717959.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:39.654Z,1516717959.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:40.011Z,1516717960.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:40.046Z,1516717960.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:40.406Z,1516717960.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:40.425Z,1516717960.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:40.824Z,1516717960.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:40.857Z,1516717960.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:41.241Z,1516717961.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:41.256Z,1516717961.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:41.621Z,1516717961.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:41.652Z,1516717961.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:42.011Z,1516717962.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:42.028Z,1516717962.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:42.410Z,1516717962.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:42.434Z,1516717962.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:42.819Z,1516717962.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:42.857Z,1516717962.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:43.228Z,1516717963.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:43.265Z,1516717963.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:43.616Z,1516717963.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:43.632Z,1516717963.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:44.012Z,1516717964.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:44.027Z,1516717964.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:44.411Z,1516717964.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:44.432Z,1516717964.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:44.816Z,1516717964.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:44.831Z,1516717964.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:45.220Z,1516717965.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:45.235Z,1516717965.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:45.618Z,1516717965.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:45.633Z,1516717965.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:46.014Z,1516717966.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:46.029Z,1516717966.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:46.409Z,1516717966.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:46.432Z,1516717966.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:46.818Z,1516717966.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:46.834Z,1516717966.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:47.218Z,1516717967.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:47.237Z,1516717967.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:47.618Z,1516717967.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:47.637Z,1516717967.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:48.017Z,1516717968.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:48.032Z,1516717968.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:48.413Z,1516717968.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:48.428Z,1516717968.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:48.818Z,1516717968.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:48.837Z,1516717968.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:49.224Z,1516717969.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:49.247Z,1516717969.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:49.621Z,1516717969.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:49.645Z,1516717969.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:50.005Z,1516717970.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:50.029Z,1516717970.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:50.404Z,1516717970.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:50.445Z,1516717970.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:50.819Z,1516717970.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:50.847Z,1516717970.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:51.219Z,1516717971.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:51.245Z,1516717971.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:51.619Z,1516717971.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:51.645Z,1516717971.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:52.005Z,1516717972.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:52.024Z,1516717972.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:52.404Z,1516717972.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:52.425Z,1516717972.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:52.823Z,1516717972.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:52.849Z,1516717972.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:53.223Z,1516717973.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:53.248Z,1516717973.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:53.623Z,1516717973.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:53.650Z,1516717973.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:54.028Z,1516717974.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:54.161Z,1516717974.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:54.404Z,1516717974.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:54.419Z,1516717974.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:54.819Z,1516717974.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:54.853Z,1516717974.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:55.240Z,1516717975.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:55.261Z,1516717975.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:55.618Z,1516717975.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:55.661Z,1516717975.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:56.013Z,1516717976.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:56.028Z,1516717976.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:56.410Z,1516717976.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:56.432Z,1516717976.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:56.823Z,1516717976.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:56.858Z,1516717976.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:57.227Z,1516717977.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:57.249Z,1516717977.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:57.619Z,1516717977.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:57.634Z,1516717977.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:58.013Z,1516717978.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:58.028Z,1516717978.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:58.414Z,1516717978.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:58.429Z,1516717978.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:58.810Z,1516717978.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:58.829Z,1516717978.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:59.219Z,1516717979.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:59.234Z,1516717979.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:32:59.620Z,1516717979.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:32:59.634Z,1516717979.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:00.015Z,1516717980.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:00.030Z,1516717980.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:00.412Z,1516717980.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:00.433Z,1516717980.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:00.808Z,1516717980.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:00.837Z,1516717980.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:01.212Z,1516717981.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:01.230Z,1516717981.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:01.613Z,1516717981.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:01.628Z,1516717981.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:02.018Z,1516717982.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:02.037Z,1516717982.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:02.423Z,1516717982.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:02.438Z,1516717982.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:02.818Z,1516717982.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:02.833Z,1516717982.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:03.212Z,1516717983.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:03.227Z,1516717983.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:03.608Z,1516717983.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:03.637Z,1516717983.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:04.013Z,1516717984.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:04.028Z,1516717984.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:04.412Z,1516717984.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:04.430Z,1516717984.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:04.812Z,1516717984.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:04.827Z,1516717984.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:05.218Z,1516717985.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:05.240Z,1516717985.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:05.622Z,1516717985.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:05.641Z,1516717985.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:06.022Z,1516717986.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:06.041Z,1516717986.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:06.413Z,1516717986.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:06.428Z,1516717986.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:06.813Z,1516717986.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:06.833Z,1516717986.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:07.212Z,1516717987.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:07.231Z,1516717987.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:07.621Z,1516717987.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:07.635Z,1516717987.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:08.023Z,1516717988.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:08.037Z,1516717988.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:08.421Z,1516717988.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:08.441Z,1516717988.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:08.822Z,1516717988.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:08.837Z,1516717988.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:09.216Z,1516717989.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:09.237Z,1516717989.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:09.616Z,1516717989.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:09.633Z,1516717989.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:10.013Z,1516717990.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:10.028Z,1516717990.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:10.417Z,1516717990.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:10.450Z,1516717990.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:10.804Z,1516717990.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:10.830Z,1516717990.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:11.222Z,1516717991.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:11.246Z,1516717991.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:11.627Z,1516717991.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:11.642Z,1516717991.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:12.020Z,1516717992.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:12.050Z,1516717992.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:12.404Z,1516717992.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:12.433Z,1516717992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:12.808Z,1516717992.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:12.834Z,1516717992.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:13.205Z,1516717993.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:13.233Z,1516717993.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:13.608Z,1516717993.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:13.636Z,1516717993.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:14.027Z,1516717994.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:14.042Z,1516717994.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:14.425Z,1516717994.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:14.451Z,1516717994.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:14.814Z,1516717994.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:14.840Z,1516717994.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:15.205Z,1516717995.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:15.236Z,1516717995.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:15.604Z,1516717995.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:15.648Z,1516717995.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:16.008Z,1516717996.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:16.036Z,1516717996.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:16.406Z,1516717996.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:16.437Z,1516717996.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:16.804Z,1516717996.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:16.842Z,1516717996.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:17.225Z,1516717997.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:17.240Z,1516717997.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:17.628Z,1516717997.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:17.644Z,1516717997.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:18.032Z,1516717998.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:18.047Z,1516717998.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:18.405Z,1516717998.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:18.438Z,1516717998.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:18.809Z,1516717998.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:18.836Z,1516717998.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:19.205Z,1516717999.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:19.232Z,1516717999.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:19.605Z,1516717999.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:19.641Z,1516717999.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:20.016Z,1516718000.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:20.043Z,1516718000.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:20.420Z,1516718000.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:20.456Z,1516718000.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:20.816Z,1516718000.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:20.846Z,1516718000.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:21.205Z,1516718001.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:21.222Z,1516718001.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:21.605Z,1516718001.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:21.620Z,1516718001.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:22.009Z,1516718002.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:22.024Z,1516718002.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:22.410Z,1516718002.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:22.426Z,1516718002.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:22.810Z,1516718002.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:22.838Z,1516718002.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:22.840Z,1516718002.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:22.840Z,1516718002.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 225 2018-01-23T14:33:22.841Z,1516718002.841 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:33:22.865Z,1516718002.865 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:33:23.216Z,1516718003.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:23.251Z,1516718003.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:23.263Z,1516718003.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:33:23.264Z,1516718003.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 225 2018-01-23T14:33:23.621Z,1516718003.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:23.649Z,1516718003.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:23.650Z,1516718003.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:33:23.650Z,1516718003.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:33:23.655Z,1516718003.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:33:24.023Z,1516718004.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:24.038Z,1516718004.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:24.414Z,1516718004.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:24.436Z,1516718004.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:24.816Z,1516718004.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:24.832Z,1516718004.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:25.208Z,1516718005.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:25.245Z,1516718005.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:25.617Z,1516718005.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:25.632Z,1516718005.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:26.020Z,1516718006.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:26.048Z,1516718006.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:26.427Z,1516718006.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:26.442Z,1516718006.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:26.824Z,1516718006.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:26.838Z,1516718006.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:27.205Z,1516718007.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:27.230Z,1516718007.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:27.605Z,1516718007.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:27.637Z,1516718007.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:28.009Z,1516718008.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:28.036Z,1516718008.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:31.104Z,1516718011.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:31.127Z,1516718011.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:31.127Z,1516718011.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 225 2018-01-23T14:33:31.128Z,1516718011.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:33:31.129Z,1516718011.129 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:31.129Z,1516718011.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 225 2018-01-23T14:33:31.129Z,1516718011.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:33:31.142Z,1516718011.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:33:31.142Z,1516718011.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:33:31.234Z,1516718011.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:31.292Z,1516718011.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:33:31.292Z,1516718011.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 225 2018-01-23T14:33:31.293Z,1516718011.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:33:31.293Z,1516718011.293 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 225 2018-01-23T14:33:31.590Z,1516718011.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:31.627Z,1516718011.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:33:31.628Z,1516718011.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:33:31.628Z,1516718011.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:33:31.628Z,1516718011.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:33:31.629Z,1516718011.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:33:31.629Z,1516718011.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:33:31.994Z,1516718011.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:32.009Z,1516718012.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T14:33:32.009Z,1516718012.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:32.394Z,1516718012.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:32.412Z,1516718012.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T14:33:32.413Z,1516718012.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:32.788Z,1516718012.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:32.808Z,1516718012.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T14:33:32.809Z,1516718012.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:33.182Z,1516718013.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:33.196Z,1516718013.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T14:33:33.197Z,1516718013.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:33.576Z,1516718013.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:33.598Z,1516718013.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T14:33:33.599Z,1516718013.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:33.990Z,1516718013.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:34.005Z,1516718014.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T14:33:34.006Z,1516718014.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:34.394Z,1516718014.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:34.408Z,1516718014.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T14:33:34.409Z,1516718014.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:34.790Z,1516718014.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:34.805Z,1516718014.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T14:33:34.806Z,1516718014.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:35.188Z,1516718015.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:35.208Z,1516718015.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T14:33:35.209Z,1516718015.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:35.589Z,1516718015.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:35.603Z,1516718015.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T14:33:35.604Z,1516718015.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:35.984Z,1516718015.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:35.999Z,1516718015.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T14:33:36.000Z,1516718016.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:36.375Z,1516718016.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:36.415Z,1516718016.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T14:33:36.416Z,1516718016.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:36.789Z,1516718016.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:36.803Z,1516718016.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T14:33:36.804Z,1516718016.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:37.199Z,1516718017.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:37.213Z,1516718017.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T14:33:37.214Z,1516718017.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:37.594Z,1516718017.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:37.616Z,1516718017.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T14:33:37.617Z,1516718017.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:37.000Z,1516718018.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:38.014Z,1516718018.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T14:33:38.015Z,1516718018.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:38.387Z,1516718018.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:38.402Z,1516718018.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T14:33:38.403Z,1516718018.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:38.772Z,1516718018.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:38.797Z,1516718018.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T14:33:38.798Z,1516718018.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:39.173Z,1516718019.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:39.212Z,1516718019.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T14:33:39.213Z,1516718019.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:39.572Z,1516718019.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:39.598Z,1516718019.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T14:33:39.599Z,1516718019.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:39.988Z,1516718019.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:40.017Z,1516718020.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T14:33:40.018Z,1516718020.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:40.393Z,1516718020.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:40.430Z,1516718020.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T14:33:40.431Z,1516718020.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:40.791Z,1516718020.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:40.820Z,1516718020.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T14:33:40.821Z,1516718020.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:41.184Z,1516718021.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:41.214Z,1516718021.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T14:33:41.215Z,1516718021.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:41.581Z,1516718021.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:41.617Z,1516718021.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T14:33:41.618Z,1516718021.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:41.980Z,1516718021.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:42.014Z,1516718022.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T14:33:42.015Z,1516718022.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:42.385Z,1516718022.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:42.414Z,1516718022.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T14:33:42.415Z,1516718022.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:42.781Z,1516718022.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:42.817Z,1516718022.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T14:33:42.818Z,1516718022.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:43.191Z,1516718023.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:43.220Z,1516718023.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T14:33:43.221Z,1516718023.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:43.602Z,1516718023.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:43.624Z,1516718023.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T14:33:43.625Z,1516718023.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:43.991Z,1516718023.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:44.016Z,1516718024.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T14:33:44.017Z,1516718024.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:44.381Z,1516718024.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:44.414Z,1516718024.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T14:33:44.415Z,1516718024.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:44.777Z,1516718024.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:44.792Z,1516718024.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T14:33:44.793Z,1516718024.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:45.181Z,1516718025.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:45.196Z,1516718025.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T14:33:45.197Z,1516718025.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:45.581Z,1516718025.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:45.616Z,1516718025.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T14:33:45.617Z,1516718025.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:45.992Z,1516718025.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:46.022Z,1516718026.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T14:33:46.023Z,1516718026.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:46.391Z,1516718026.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:46.405Z,1516718026.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T14:33:46.406Z,1516718026.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:46.791Z,1516718026.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:46.824Z,1516718026.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T14:33:46.825Z,1516718026.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:47.177Z,1516718027.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:47.200Z,1516718027.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T14:33:47.200Z,1516718027.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:47.581Z,1516718027.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:47.595Z,1516718027.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T14:33:47.596Z,1516718027.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:47.978Z,1516718027.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:48.001Z,1516718028.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T14:33:48.002Z,1516718028.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:48.382Z,1516718028.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:48.397Z,1516718028.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T14:33:48.398Z,1516718028.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:48.778Z,1516718028.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:48.804Z,1516718028.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T14:33:48.805Z,1516718028.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:49.184Z,1516718029.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:49.198Z,1516718029.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T14:33:49.200Z,1516718029.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:49.587Z,1516718029.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:49.602Z,1516718029.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T14:33:49.603Z,1516718029.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:49.983Z,1516718029.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:49.998Z,1516718029.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T14:33:49.999Z,1516718029.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:50.379Z,1516718030.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:50.401Z,1516718030.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T14:33:50.402Z,1516718030.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:50.785Z,1516718030.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:50.799Z,1516718030.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T14:33:50.800Z,1516718030.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:51.183Z,1516718031.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:51.197Z,1516718031.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:51.580Z,1516718031.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:51.599Z,1516718031.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:51.986Z,1516718031.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:52.008Z,1516718032.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:52.390Z,1516718032.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:52.405Z,1516718032.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:52.788Z,1516718032.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:52.803Z,1516718032.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:53.181Z,1516718033.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:53.196Z,1516718033.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:53.584Z,1516718033.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:53.599Z,1516718033.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:53.986Z,1516718033.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:54.001Z,1516718034.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:54.389Z,1516718034.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:54.409Z,1516718034.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:54.790Z,1516718034.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:54.804Z,1516718034.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:55.189Z,1516718035.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:55.213Z,1516718035.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:55.593Z,1516718035.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:55.616Z,1516718035.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:55.996Z,1516718035.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:56.011Z,1516718036.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:56.373Z,1516718036.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:56.411Z,1516718036.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:56.772Z,1516718036.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:56.805Z,1516718036.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:57.173Z,1516718037.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:57.213Z,1516718037.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:57.572Z,1516718037.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:57.609Z,1516718037.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:57.996Z,1516718037.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:58.017Z,1516718038.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:58.397Z,1516718038.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:58.413Z,1516718038.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:58.791Z,1516718038.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:58.808Z,1516718038.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:59.172Z,1516718039.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:59.205Z,1516718039.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:59.576Z,1516718039.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:33:59.604Z,1516718039.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:33:59.972Z,1516718039.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:00.009Z,1516718040.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:00.373Z,1516718040.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:00.404Z,1516718040.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:00.772Z,1516718040.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:00.811Z,1516718040.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:01.183Z,1516718041.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:01.209Z,1516718041.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:01.587Z,1516718041.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:01.622Z,1516718041.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:01.982Z,1516718041.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:02.013Z,1516718042.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:02.370Z,1516718042.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:02.385Z,1516718042.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:02.772Z,1516718042.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:02.793Z,1516718042.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:03.181Z,1516718043.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:03.196Z,1516718043.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:03.574Z,1516718043.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:03.590Z,1516718043.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:03.995Z,1516718043.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:04.020Z,1516718044.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:04.399Z,1516718044.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:04.424Z,1516718044.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:04.792Z,1516718044.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:04.827Z,1516718044.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:05.182Z,1516718045.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:05.197Z,1516718045.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:05.581Z,1516718045.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:05.596Z,1516718045.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:05.976Z,1516718045.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:06.005Z,1516718046.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:06.384Z,1516718046.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:06.399Z,1516718046.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:06.781Z,1516718046.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:06.796Z,1516718046.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:07.185Z,1516718047.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:07.205Z,1516718047.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:07.592Z,1516718047.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:07.606Z,1516718047.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:07.986Z,1516718047.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:08.001Z,1516718048.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:08.377Z,1516718048.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:08.396Z,1516718048.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:08.784Z,1516718048.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:08.805Z,1516718048.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:09.182Z,1516718049.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:09.197Z,1516718049.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:09.576Z,1516718049.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:09.608Z,1516718049.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:09.991Z,1516718049.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:10.006Z,1516718050.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:10.390Z,1516718050.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:10.405Z,1516718050.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:10.790Z,1516718050.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:10.805Z,1516718050.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:11.180Z,1516718051.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:11.199Z,1516718051.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:11.581Z,1516718051.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:11.596Z,1516718051.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:11.987Z,1516718051.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:12.007Z,1516718052.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:12.394Z,1516718052.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:12.409Z,1516718052.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:12.792Z,1516718052.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:12.807Z,1516718052.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:13.180Z,1516718053.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:13.207Z,1516718053.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:13.577Z,1516718053.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:13.603Z,1516718053.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:13.990Z,1516718053.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:14.013Z,1516718054.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:14.386Z,1516718054.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:14.417Z,1516718054.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:14.790Z,1516718054.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:14.812Z,1516718054.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:15.173Z,1516718055.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:15.204Z,1516718055.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:15.572Z,1516718055.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:15.599Z,1516718055.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:15.990Z,1516718055.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:16.012Z,1516718056.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:16.400Z,1516718056.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:16.415Z,1516718056.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:16.795Z,1516718056.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:16.810Z,1516718056.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:17.173Z,1516718057.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:17.205Z,1516718057.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:17.572Z,1516718057.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:17.608Z,1516718057.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:17.992Z,1516718057.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:18.006Z,1516718058.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:18.394Z,1516718058.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:18.417Z,1516718058.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:18.789Z,1516718058.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:18.819Z,1516718058.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:19.173Z,1516718059.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:19.200Z,1516718059.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:19.572Z,1516718059.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:19.605Z,1516718059.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:19.990Z,1516718059.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:20.013Z,1516718060.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:20.389Z,1516718060.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:20.408Z,1516718060.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:20.788Z,1516718060.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:20.818Z,1516718060.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:21.173Z,1516718061.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:21.217Z,1516718061.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:21.572Z,1516718061.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:21.606Z,1516718061.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:21.990Z,1516718061.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:22.013Z,1516718062.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:22.400Z,1516718062.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:22.415Z,1516718062.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:22.792Z,1516718062.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:22.807Z,1516718062.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:23.173Z,1516718063.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:23.205Z,1516718063.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:23.572Z,1516718063.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:23.608Z,1516718063.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:23.991Z,1516718063.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:24.011Z,1516718064.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:24.392Z,1516718064.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:24.413Z,1516718064.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:24.786Z,1516718064.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:24.818Z,1516718064.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:25.173Z,1516718065.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:25.205Z,1516718065.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:25.572Z,1516718065.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:25.605Z,1516718065.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:25.990Z,1516718065.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:26.013Z,1516718066.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:26.390Z,1516718066.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:26.405Z,1516718066.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:26.788Z,1516718066.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:26.809Z,1516718066.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:27.173Z,1516718067.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:27.206Z,1516718067.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:27.570Z,1516718067.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:27.598Z,1516718067.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:27.992Z,1516718067.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:28.007Z,1516718068.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:28.396Z,1516718068.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:28.422Z,1516718068.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:31.476Z,1516718071.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:31.499Z,1516718071.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:31.515Z,1516718071.515 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:34:31.602Z,1516718071.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:31.617Z,1516718071.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:31.954Z,1516718071.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:31.969Z,1516718071.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:32.361Z,1516718072.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:32.376Z,1516718072.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:32.752Z,1516718072.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:32.786Z,1516718072.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:33.173Z,1516718073.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:33.208Z,1516718073.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:33.564Z,1516718073.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:33.580Z,1516718073.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:33.961Z,1516718073.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:33.989Z,1516718073.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:34.356Z,1516718074.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:34.378Z,1516718074.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:34.761Z,1516718074.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:34.777Z,1516718074.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:35.142Z,1516718075.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:35.170Z,1516718075.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:35.545Z,1516718075.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:35.571Z,1516718075.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:35.944Z,1516718075.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:35.981Z,1516718075.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:36.367Z,1516718076.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:36.382Z,1516718076.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:36.766Z,1516718076.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:36.781Z,1516718076.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:37.161Z,1516718077.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:37.187Z,1516718077.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:37.542Z,1516718077.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:37.577Z,1516718077.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:37.960Z,1516718077.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:37.981Z,1516718077.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:38.345Z,1516718078.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:38.381Z,1516718078.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:38.744Z,1516718078.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:38.777Z,1516718078.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:39.163Z,1516718079.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:39.178Z,1516718079.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:39.570Z,1516718079.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:39.585Z,1516718079.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:39.967Z,1516718079.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:39.982Z,1516718079.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:40.345Z,1516718080.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:40.377Z,1516718080.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:40.744Z,1516718080.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:40.784Z,1516718080.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:41.148Z,1516718081.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:41.175Z,1516718081.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:41.565Z,1516718081.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:41.580Z,1516718081.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:41.944Z,1516718081.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:41.980Z,1516718081.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:42.360Z,1516718082.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:42.381Z,1516718082.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:42.764Z,1516718082.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:42.791Z,1516718082.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:43.171Z,1516718083.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:43.186Z,1516718083.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:43.542Z,1516718083.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:43.565Z,1516718083.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:43.944Z,1516718083.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:43.980Z,1516718083.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:44.348Z,1516718084.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:44.382Z,1516718084.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:44.752Z,1516718084.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:44.778Z,1516718084.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:45.155Z,1516718085.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:45.190Z,1516718085.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:45.569Z,1516718085.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:45.583Z,1516718085.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:45.956Z,1516718085.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:45.989Z,1516718085.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:46.352Z,1516718086.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:46.378Z,1516718086.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:46.750Z,1516718086.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:46.764Z,1516718086.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:47.169Z,1516718087.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:47.196Z,1516718087.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:47.554Z,1516718087.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:47.585Z,1516718087.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:47.961Z,1516718087.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:47.975Z,1516718087.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:48.362Z,1516718088.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:48.381Z,1516718088.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:48.763Z,1516718088.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:48.778Z,1516718088.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:49.164Z,1516718089.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:49.184Z,1516718089.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:49.552Z,1516718089.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:49.571Z,1516718089.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:49.961Z,1516718089.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:49.976Z,1516718089.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:50.353Z,1516718090.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:50.381Z,1516718090.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:50.755Z,1516718090.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:50.770Z,1516718090.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:51.162Z,1516718091.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:51.181Z,1516718091.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:51.567Z,1516718091.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:51.582Z,1516718091.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:51.962Z,1516718091.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:51.981Z,1516718091.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:52.354Z,1516718092.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:52.377Z,1516718092.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:52.759Z,1516718092.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:52.774Z,1516718092.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:53.149Z,1516718093.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:53.172Z,1516718093.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:53.564Z,1516718093.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:53.579Z,1516718093.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:53.957Z,1516718093.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:53.971Z,1516718093.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:54.358Z,1516718094.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:54.390Z,1516718094.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:54.767Z,1516718094.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:54.782Z,1516718094.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:55.167Z,1516718095.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:55.181Z,1516718095.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:55.542Z,1516718095.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:55.573Z,1516718095.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:55.952Z,1516718095.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:55.979Z,1516718095.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:56.356Z,1516718096.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:56.371Z,1516718096.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:56.759Z,1516718096.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:56.774Z,1516718096.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:57.164Z,1516718097.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:57.187Z,1516718097.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:57.568Z,1516718097.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:57.583Z,1516718097.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:57.964Z,1516718097.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:57.985Z,1516718097.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:58.360Z,1516718098.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:58.378Z,1516718098.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:58.744Z,1516718098.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:58.781Z,1516718098.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:59.144Z,1516718099.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:59.181Z,1516718099.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:59.547Z,1516718099.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:59.581Z,1516718099.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:34:59.949Z,1516718099.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:34:59.976Z,1516718099.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:00.363Z,1516718100.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:00.385Z,1516718100.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:00.769Z,1516718100.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:00.784Z,1516718100.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:01.164Z,1516718101.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:01.179Z,1516718101.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:01.547Z,1516718101.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:01.574Z,1516718101.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:01.948Z,1516718101.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:01.978Z,1516718101.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:02.346Z,1516718102.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:02.382Z,1516718102.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:02.751Z,1516718102.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:02.781Z,1516718102.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:03.167Z,1516718103.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:03.182Z,1516718103.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:03.570Z,1516718103.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:03.597Z,1516718103.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:03.961Z,1516718103.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:03.984Z,1516718103.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:04.346Z,1516718104.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:04.374Z,1516718104.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:04.747Z,1516718104.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:04.782Z,1516718104.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:05.142Z,1516718105.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:05.181Z,1516718105.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:05.545Z,1516718105.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:05.586Z,1516718105.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:05.946Z,1516718105.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:05.975Z,1516718105.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:06.359Z,1516718106.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:06.391Z,1516718106.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:06.766Z,1516718106.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:06.789Z,1516718106.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:07.167Z,1516718107.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:07.190Z,1516718107.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:07.542Z,1516718107.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:07.573Z,1516718107.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:07.948Z,1516718107.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:07.980Z,1516718107.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:08.349Z,1516718108.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:08.385Z,1516718108.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:08.753Z,1516718108.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:08.791Z,1516718108.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:09.191Z,1516718109.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:09.213Z,1516718109.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:09.567Z,1516718109.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:09.589Z,1516718109.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x62892 got:0x49716 2018-01-23T14:35:09.609Z,1516718109.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:09.959Z,1516718109.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:09.997Z,1516718109.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:10.355Z,1516718110.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:10.365Z,1516718110.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x12437 got:0x49137 2018-01-23T14:35:10.400Z,1516718110.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:10.752Z,1516718110.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:10.761Z,1516718110.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x60544 got:0x13565 2018-01-23T14:35:10.782Z,1516718110.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:11.152Z,1516718111.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:11.172Z,1516718111.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:11.551Z,1516718111.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:11.589Z,1516718111.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:11.950Z,1516718111.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:11.970Z,1516718111.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:12.363Z,1516718112.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:12.378Z,1516718112.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:12.762Z,1516718112.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:12.777Z,1516718112.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:13.160Z,1516718113.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:13.201Z,1516718113.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:13.549Z,1516718113.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:13.573Z,1516718113.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:13.953Z,1516718113.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:13.972Z,1516718113.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:14.356Z,1516718114.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:14.372Z,1516718114.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:14.752Z,1516718114.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:14.802Z,1516718114.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:15.157Z,1516718115.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:15.177Z,1516718115.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:15.560Z,1516718115.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:15.577Z,1516718115.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:15.961Z,1516718115.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:15.981Z,1516718115.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:16.356Z,1516718116.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:16.390Z,1516718116.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:16.753Z,1516718116.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:16.769Z,1516718116.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:17.149Z,1516718117.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:17.178Z,1516718117.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:17.564Z,1516718117.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:17.579Z,1516718117.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:17.953Z,1516718117.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:17.989Z,1516718117.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:18.362Z,1516718118.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:18.382Z,1516718118.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:18.769Z,1516718118.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:18.784Z,1516718118.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:19.167Z,1516718119.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:19.181Z,1516718119.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:19.548Z,1516718119.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:19.592Z,1516718119.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:19.948Z,1516718119.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:19.970Z,1516718119.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:20.354Z,1516718120.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:20.377Z,1516718120.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:20.742Z,1516718120.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:20.779Z,1516718120.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:21.166Z,1516718121.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:21.206Z,1516718121.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:21.568Z,1516718121.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:21.587Z,1516718121.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:21.962Z,1516718121.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:21.981Z,1516718121.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:22.345Z,1516718122.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:22.374Z,1516718122.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:22.744Z,1516718122.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:22.780Z,1516718122.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:23.142Z,1516718123.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:23.173Z,1516718123.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:23.549Z,1516718123.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:23.579Z,1516718123.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:23.943Z,1516718123.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:23.980Z,1516718123.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:24.362Z,1516718124.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:24.385Z,1516718124.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:24.767Z,1516718124.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:24.784Z,1516718124.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:25.158Z,1516718125.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:25.193Z,1516718125.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:25.542Z,1516718125.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:25.576Z,1516718125.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:25.948Z,1516718125.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:25.974Z,1516718125.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:26.345Z,1516718126.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:26.393Z,1516718126.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:26.748Z,1516718126.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:26.769Z,1516718126.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:27.159Z,1516718127.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:27.209Z,1516718127.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:27.566Z,1516718127.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:27.588Z,1516718127.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:27.963Z,1516718127.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:27.977Z,1516718127.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:28.347Z,1516718128.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:28.374Z,1516718128.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:28.759Z,1516718128.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:28.781Z,1516718128.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:31.856Z,1516718131.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:31.877Z,1516718131.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:31.988Z,1516718131.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:32.020Z,1516718132.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:32.344Z,1516718132.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:32.385Z,1516718132.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:32.755Z,1516718132.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:32.769Z,1516718132.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:33.135Z,1516718133.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:33.166Z,1516718133.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:33.532Z,1516718133.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:33.569Z,1516718133.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:33.932Z,1516718133.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:33.947Z,1516718133.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:34.330Z,1516718134.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:34.345Z,1516718134.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:34.726Z,1516718134.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:34.753Z,1516718134.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:35.134Z,1516718135.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:35.149Z,1516718135.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:35.535Z,1516718135.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:35.550Z,1516718135.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:35.947Z,1516718135.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:35.962Z,1516718135.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:36.329Z,1516718136.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:36.344Z,1516718136.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:36.725Z,1516718136.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:36.746Z,1516718136.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:37.132Z,1516718137.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:37.164Z,1516718137.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:37.534Z,1516718137.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:37.549Z,1516718137.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:37.932Z,1516718137.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:37.947Z,1516718137.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:38.338Z,1516718138.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:38.353Z,1516718138.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:38.742Z,1516718138.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:38.765Z,1516718138.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:39.138Z,1516718139.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:39.153Z,1516718139.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:39.525Z,1516718139.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:39.546Z,1516718139.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:39.929Z,1516718139.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:39.948Z,1516718139.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:40.328Z,1516718140.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:40.349Z,1516718140.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:40.727Z,1516718140.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:40.748Z,1516718140.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:41.140Z,1516718141.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:41.155Z,1516718141.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:41.544Z,1516718141.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:41.559Z,1516718141.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:41.939Z,1516718141.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:41.954Z,1516718141.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:42.330Z,1516718142.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:42.346Z,1516718142.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:42.732Z,1516718142.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:42.748Z,1516718142.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:43.142Z,1516718143.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:43.157Z,1516718143.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:43.544Z,1516718143.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:43.559Z,1516718143.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:43.938Z,1516718143.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:43.965Z,1516718143.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:44.322Z,1516718144.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:44.350Z,1516718144.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:44.720Z,1516718144.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:44.757Z,1516718144.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:45.136Z,1516718145.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:45.163Z,1516718145.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:45.552Z,1516718145.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:45.567Z,1516718145.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:45.949Z,1516718145.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:45.964Z,1516718145.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:46.340Z,1516718146.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:46.355Z,1516718146.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:46.725Z,1516718146.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:46.753Z,1516718146.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:47.140Z,1516718147.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:47.161Z,1516718147.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:47.536Z,1516718147.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:47.560Z,1516718147.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:47.936Z,1516718147.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:47.963Z,1516718147.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:48.322Z,1516718148.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:48.362Z,1516718148.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:48.725Z,1516718148.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:48.761Z,1516718148.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:49.132Z,1516718149.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:49.160Z,1516718149.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:49.535Z,1516718149.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:49.574Z,1516718149.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:49.931Z,1516718149.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:49.962Z,1516718149.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:50.322Z,1516718150.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:50.337Z,1516718150.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:50.721Z,1516718150.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:50.735Z,1516718150.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:51.135Z,1516718151.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:51.162Z,1516718151.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:51.547Z,1516718151.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:51.577Z,1516718151.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:51.943Z,1516718151.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:51.969Z,1516718151.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:52.326Z,1516718152.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:52.341Z,1516718152.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:52.725Z,1516718152.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:52.752Z,1516718152.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:53.142Z,1516718153.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:53.157Z,1516718153.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:53.531Z,1516718153.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:53.546Z,1516718153.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:53.932Z,1516718153.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:53.946Z,1516718153.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:54.329Z,1516718154.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:54.348Z,1516718154.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:54.730Z,1516718154.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:54.745Z,1516718154.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:55.132Z,1516718155.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:55.146Z,1516718155.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:55.543Z,1516718155.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:55.558Z,1516718155.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:55.932Z,1516718155.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:55.953Z,1516718155.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:56.329Z,1516718156.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:56.344Z,1516718156.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:56.729Z,1516718156.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:56.744Z,1516718156.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:57.133Z,1516718157.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:57.149Z,1516718157.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:57.535Z,1516718157.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:57.550Z,1516718157.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:57.934Z,1516718157.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:57.949Z,1516718157.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:58.325Z,1516718158.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:58.347Z,1516718158.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:58.728Z,1516718158.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:58.743Z,1516718158.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:59.134Z,1516718159.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:59.149Z,1516718159.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:59.533Z,1516718159.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:59.553Z,1516718159.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:35:59.936Z,1516718159.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:35:59.951Z,1516718159.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:00.330Z,1516718160.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:00.344Z,1516718160.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:00.728Z,1516718160.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:00.743Z,1516718160.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:01.134Z,1516718161.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:01.153Z,1516718161.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:01.538Z,1516718161.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:01.553Z,1516718161.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:01.936Z,1516718161.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:01.951Z,1516718161.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:02.328Z,1516718162.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:02.351Z,1516718162.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:02.726Z,1516718162.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:02.753Z,1516718162.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:03.136Z,1516718163.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:03.163Z,1516718163.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:03.542Z,1516718163.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:03.561Z,1516718163.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:03.939Z,1516718163.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:03.960Z,1516718163.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:04.333Z,1516718164.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:04.349Z,1516718164.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:04.724Z,1516718164.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:04.745Z,1516718164.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:05.143Z,1516718165.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:05.164Z,1516718165.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:05.538Z,1516718165.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:05.553Z,1516718165.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:05.939Z,1516718165.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:05.954Z,1516718165.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:06.325Z,1516718166.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:06.355Z,1516718166.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:06.728Z,1516718166.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:06.758Z,1516718166.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:07.142Z,1516718167.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:07.165Z,1516718167.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:07.543Z,1516718167.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:07.561Z,1516718167.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:07.941Z,1516718167.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:07.969Z,1516718167.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:08.335Z,1516718168.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:08.358Z,1516718168.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:08.752Z,1516718168.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:08.808Z,1516718168.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:09.142Z,1516718169.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:09.169Z,1516718169.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:09.549Z,1516718169.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:09.573Z,1516718169.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:09.947Z,1516718169.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:09.971Z,1516718169.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:10.321Z,1516718170.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:10.353Z,1516718170.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:10.720Z,1516718170.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:10.737Z,1516718170.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:11.132Z,1516718171.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:11.167Z,1516718171.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:11.535Z,1516718171.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:11.566Z,1516718171.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:11.940Z,1516718171.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:11.970Z,1516718171.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:12.329Z,1516718172.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:12.349Z,1516718172.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:12.729Z,1516718172.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:12.745Z,1516718172.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:13.132Z,1516718173.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:13.147Z,1516718173.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:13.536Z,1516718173.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:13.551Z,1516718173.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:13.932Z,1516718173.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:13.947Z,1516718173.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:14.339Z,1516718174.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:14.387Z,1516718174.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:14.739Z,1516718174.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:14.754Z,1516718174.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:15.145Z,1516718175.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:15.160Z,1516718175.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:15.549Z,1516718175.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:15.573Z,1516718175.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:15.953Z,1516718175.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:16.005Z,1516718176.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:16.344Z,1516718176.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:16.372Z,1516718176.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:16.744Z,1516718176.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:16.780Z,1516718176.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:17.150Z,1516718177.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:17.188Z,1516718177.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:17.542Z,1516718177.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:17.557Z,1516718177.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:17.943Z,1516718177.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:17.958Z,1516718177.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:18.321Z,1516718178.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:18.353Z,1516718178.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:18.769Z,1516718178.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:18.813Z,1516718178.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:19.126Z,1516718179.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:19.157Z,1516718179.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:19.547Z,1516718179.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:19.566Z,1516718179.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:19.950Z,1516718179.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:20.016Z,1516718180.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:20.342Z,1516718180.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:20.386Z,1516718180.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:20.726Z,1516718180.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:20.770Z,1516718180.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:21.142Z,1516718181.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:21.178Z,1516718181.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:21.552Z,1516718181.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:21.584Z,1516718181.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:21.936Z,1516718181.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:21.992Z,1516718181.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:22.337Z,1516718182.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:22.357Z,1516718182.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:22.742Z,1516718182.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:22.757Z,1516718182.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:23.144Z,1516718183.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:23.165Z,1516718183.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:23.526Z,1516718183.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:23.566Z,1516718183.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:23.926Z,1516718183.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:23.965Z,1516718183.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:23.971Z,1516718183.971 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:23.972Z,1516718183.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 226 2018-01-23T14:36:23.972Z,1516718183.972 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:36:24.030Z,1516718184.030 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:36:24.326Z,1516718184.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:24.368Z,1516718184.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:24.397Z,1516718184.397 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:36:24.397Z,1516718184.397 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 226 2018-01-23T14:36:24.727Z,1516718184.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:24.781Z,1516718184.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:24.782Z,1516718184.782 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:36:24.782Z,1516718184.782 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:36:24.787Z,1516718184.787 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:36:25.135Z,1516718185.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:25.179Z,1516718185.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:25.541Z,1516718185.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:25.578Z,1516718185.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:25.946Z,1516718185.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:25.980Z,1516718185.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:26.365Z,1516718186.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:26.393Z,1516718186.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:26.732Z,1516718186.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:26.746Z,1516718186.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:27.131Z,1516718187.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:27.159Z,1516718187.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:27.535Z,1516718187.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:27.583Z,1516718187.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:27.922Z,1516718187.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:27.984Z,1516718187.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:28.342Z,1516718188.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:28.373Z,1516718188.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:28.751Z,1516718188.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:28.799Z,1516718188.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:29.133Z,1516718189.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:29.199Z,1516718189.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:33.055Z,1516718193.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:33.070Z,1516718193.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:33.070Z,1516718193.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 226 2018-01-23T14:36:33.070Z,1516718193.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:36:33.072Z,1516718193.072 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:33.072Z,1516718193.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 226 2018-01-23T14:36:33.072Z,1516718193.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:36:33.085Z,1516718193.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:36:33.085Z,1516718193.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:36:33.188Z,1516718193.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:33.245Z,1516718193.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:36:33.245Z,1516718193.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 226 2018-01-23T14:36:33.245Z,1516718193.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:36:33.245Z,1516718193.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 226 2018-01-23T14:36:33.547Z,1516718193.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:33.572Z,1516718193.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:36:33.573Z,1516718193.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:36:33.573Z,1516718193.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:36:33.574Z,1516718193.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:36:33.574Z,1516718193.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:36:33.574Z,1516718193.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:36:33.971Z,1516718193.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:33.985Z,1516718193.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T14:36:33.986Z,1516718193.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:34.359Z,1516718194.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:34.374Z,1516718194.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T14:36:34.375Z,1516718194.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:34.736Z,1516718194.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:34.769Z,1516718194.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T14:36:34.770Z,1516718194.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:35.136Z,1516718195.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:35.151Z,1516718195.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T14:36:35.152Z,1516718195.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:35.537Z,1516718195.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:35.552Z,1516718195.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T14:36:35.553Z,1516718195.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:35.948Z,1516718195.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:35.981Z,1516718195.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T14:36:35.981Z,1516718195.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:36.355Z,1516718196.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:36.389Z,1516718196.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T14:36:36.390Z,1516718196.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:36.760Z,1516718196.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:36.783Z,1516718196.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T14:36:36.784Z,1516718196.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:37.160Z,1516718197.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:37.183Z,1516718197.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T14:36:37.184Z,1516718197.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:37.552Z,1516718197.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:37.591Z,1516718197.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T14:36:37.592Z,1516718197.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:37.944Z,1516718197.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:37.964Z,1516718197.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T14:36:37.965Z,1516718197.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:38.343Z,1516718198.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:38.358Z,1516718198.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T14:36:38.359Z,1516718198.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:38.741Z,1516718198.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:38.767Z,1516718198.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T14:36:38.768Z,1516718198.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:39.141Z,1516718199.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:39.164Z,1516718199.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T14:36:39.165Z,1516718199.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:39.548Z,1516718199.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:39.562Z,1516718199.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T14:36:39.563Z,1516718199.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:39.951Z,1516718199.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:39.965Z,1516718199.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T14:36:39.966Z,1516718199.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:40.348Z,1516718200.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:40.362Z,1516718200.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T14:36:40.363Z,1516718200.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:40.743Z,1516718200.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:40.758Z,1516718200.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T14:36:40.759Z,1516718200.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:41.144Z,1516718201.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:41.164Z,1516718201.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T14:36:41.165Z,1516718201.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:41.545Z,1516718201.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:41.564Z,1516718201.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T14:36:41.565Z,1516718201.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:41.942Z,1516718201.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:41.957Z,1516718201.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T14:36:41.958Z,1516718201.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:42.355Z,1516718202.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:42.370Z,1516718202.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T14:36:42.371Z,1516718202.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:42.758Z,1516718202.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:42.776Z,1516718202.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T14:36:42.777Z,1516718202.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:43.152Z,1516718203.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:43.174Z,1516718203.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T14:36:43.179Z,1516718203.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:43.536Z,1516718203.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:43.564Z,1516718203.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T14:36:43.565Z,1516718203.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:43.953Z,1516718203.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:43.972Z,1516718203.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T14:36:43.973Z,1516718203.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:44.337Z,1516718204.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:44.368Z,1516718204.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T14:36:44.369Z,1516718204.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:44.737Z,1516718204.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:44.776Z,1516718204.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T14:36:44.777Z,1516718204.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:45.136Z,1516718205.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:45.162Z,1516718205.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T14:36:45.164Z,1516718205.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:45.555Z,1516718205.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:45.575Z,1516718205.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T14:36:45.576Z,1516718205.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:45.960Z,1516718205.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:45.974Z,1516718205.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T14:36:45.975Z,1516718205.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:46.356Z,1516718206.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:46.370Z,1516718206.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T14:36:46.371Z,1516718206.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:46.745Z,1516718206.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:46.760Z,1516718206.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T14:36:46.761Z,1516718206.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:47.144Z,1516718207.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:47.191Z,1516718207.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T14:36:47.191Z,1516718207.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:47.544Z,1516718207.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:47.569Z,1516718207.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T14:36:47.570Z,1516718207.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:47.938Z,1516718207.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:47.970Z,1516718207.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T14:36:47.971Z,1516718207.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:48.354Z,1516718208.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:48.368Z,1516718208.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T14:36:48.369Z,1516718208.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:48.754Z,1516718208.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:48.768Z,1516718208.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T14:36:48.769Z,1516718208.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:49.203Z,1516718209.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:49.218Z,1516718209.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T14:36:49.219Z,1516718209.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:49.545Z,1516718209.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:49.560Z,1516718209.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T14:36:49.561Z,1516718209.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:49.945Z,1516718209.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:49.964Z,1516718209.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T14:36:49.965Z,1516718209.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:50.340Z,1516718210.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:50.372Z,1516718210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T14:36:50.373Z,1516718210.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:50.737Z,1516718210.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:50.772Z,1516718210.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T14:36:50.773Z,1516718210.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:51.137Z,1516718211.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:51.164Z,1516718211.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T14:36:51.165Z,1516718211.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:51.556Z,1516718211.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:51.570Z,1516718211.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T14:36:51.571Z,1516718211.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:51.960Z,1516718211.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:52.015Z,1516718212.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T14:36:52.016Z,1516718212.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:52.360Z,1516718212.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:52.380Z,1516718212.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T14:36:52.381Z,1516718212.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:52.736Z,1516718212.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:52.762Z,1516718212.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T14:36:52.763Z,1516718212.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:53.136Z,1516718213.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:53.172Z,1516718213.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:53.541Z,1516718213.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:53.568Z,1516718213.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:53.952Z,1516718213.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:53.973Z,1516718213.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:54.354Z,1516718214.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:54.377Z,1516718214.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:54.763Z,1516718214.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:54.778Z,1516718214.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:55.152Z,1516718215.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:55.185Z,1516718215.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:55.536Z,1516718215.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:55.564Z,1516718215.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:55.937Z,1516718215.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:55.963Z,1516718215.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:56.336Z,1516718216.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:56.369Z,1516718216.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:56.737Z,1516718216.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:56.776Z,1516718216.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:57.140Z,1516718217.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:57.173Z,1516718217.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:57.555Z,1516718217.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:57.570Z,1516718217.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:57.960Z,1516718217.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:57.980Z,1516718217.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:58.355Z,1516718218.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:58.370Z,1516718218.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:58.736Z,1516718218.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:58.762Z,1516718218.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:59.136Z,1516718219.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:59.176Z,1516718219.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:59.541Z,1516718219.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:59.568Z,1516718219.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:36:59.936Z,1516718219.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:36:59.963Z,1516718219.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:00.354Z,1516718220.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:00.378Z,1516718220.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:00.760Z,1516718220.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:00.775Z,1516718220.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:01.152Z,1516718221.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:01.185Z,1516718221.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:01.541Z,1516718221.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:01.570Z,1516718221.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:01.941Z,1516718221.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:01.968Z,1516718221.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:02.337Z,1516718222.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:02.372Z,1516718222.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:02.737Z,1516718222.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:02.773Z,1516718222.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:03.136Z,1516718223.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:03.153Z,1516718223.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:03.547Z,1516718223.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:03.581Z,1516718223.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:03.960Z,1516718223.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:03.987Z,1516718223.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:04.351Z,1516718224.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:04.387Z,1516718224.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:04.747Z,1516718224.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:04.765Z,1516718224.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:05.146Z,1516718225.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:05.161Z,1516718225.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:05.547Z,1516718225.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:05.565Z,1516718225.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:05.944Z,1516718225.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:05.964Z,1516718225.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:06.347Z,1516718226.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:06.363Z,1516718226.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:06.752Z,1516718226.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:06.767Z,1516718226.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:07.148Z,1516718227.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:07.164Z,1516718227.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:07.545Z,1516718227.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:07.561Z,1516718227.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:07.944Z,1516718227.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:07.960Z,1516718227.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:08.343Z,1516718228.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:08.359Z,1516718228.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:08.745Z,1516718228.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:08.761Z,1516718228.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:09.140Z,1516718229.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:09.160Z,1516718229.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:09.547Z,1516718229.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:09.563Z,1516718229.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:09.951Z,1516718229.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:09.967Z,1516718229.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:10.348Z,1516718230.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:10.363Z,1516718230.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:10.743Z,1516718230.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:10.758Z,1516718230.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:11.144Z,1516718231.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:11.165Z,1516718231.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:11.544Z,1516718231.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:11.559Z,1516718231.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:11.942Z,1516718231.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:11.961Z,1516718231.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:12.355Z,1516718232.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:12.370Z,1516718232.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:12.753Z,1516718232.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:12.773Z,1516718232.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:13.154Z,1516718233.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:13.173Z,1516718233.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:13.545Z,1516718233.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:13.559Z,1516718233.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:13.944Z,1516718233.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:13.959Z,1516718233.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:14.340Z,1516718234.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:14.367Z,1516718234.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:14.750Z,1516718234.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:14.765Z,1516718234.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:15.134Z,1516718235.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:15.162Z,1516718235.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:15.559Z,1516718235.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:15.574Z,1516718235.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:15.960Z,1516718235.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:15.974Z,1516718235.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:16.352Z,1516718236.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:16.379Z,1516718236.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:16.736Z,1516718236.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:16.769Z,1516718236.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:17.135Z,1516718237.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:17.174Z,1516718237.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:17.541Z,1516718237.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:17.568Z,1516718237.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:17.936Z,1516718237.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:17.965Z,1516718237.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:18.347Z,1516718238.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:18.381Z,1516718238.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:18.760Z,1516718238.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:18.775Z,1516718238.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:19.147Z,1516718239.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:19.181Z,1516718239.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:19.536Z,1516718239.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:19.571Z,1516718239.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:19.936Z,1516718239.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:19.973Z,1516718239.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:20.340Z,1516718240.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:20.381Z,1516718240.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:20.745Z,1516718240.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:20.760Z,1516718240.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:21.135Z,1516718241.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:21.157Z,1516718241.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:21.559Z,1516718241.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:21.589Z,1516718241.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:21.963Z,1516718241.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:21.989Z,1516718241.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:22.352Z,1516718242.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:22.385Z,1516718242.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:22.746Z,1516718242.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:22.761Z,1516718242.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:23.144Z,1516718243.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:23.159Z,1516718243.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:23.542Z,1516718243.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:23.561Z,1516718243.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:23.942Z,1516718243.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:23.961Z,1516718243.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:24.324Z,1516718244.324 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:37:24.324Z,1516718244.324 [NAL9602] Data Fault, FailCount= 2 2018-01-23T14:37:24.324Z,1516718244.324 [NAL9602](ERROR): Data Fault 2018-01-23T14:37:24.341Z,1516718244.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:24.384Z,1516718244.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:24.397Z,1516718244.397 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:37:24.720Z,1516718244.720 [NAL9602](INFO): Powering down 2018-01-23T14:37:24.740Z,1516718244.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:24.767Z,1516718244.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:25.145Z,1516718245.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:25.160Z,1516718245.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:25.544Z,1516718245.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:25.559Z,1516718245.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:25.571Z,1516718245.571 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:37:25.571Z,1516718245.571 [NAL9602] No Fault, FailCount= 2 2018-01-23T14:37:25.944Z,1516718245.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:25.959Z,1516718245.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:26.338Z,1516718246.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:26.365Z,1516718246.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:26.748Z,1516718246.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:26.762Z,1516718246.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:27.141Z,1516718247.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:27.156Z,1516718247.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:27.536Z,1516718247.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:27.569Z,1516718247.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:27.936Z,1516718247.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:27.973Z,1516718247.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:27.976Z,1516718247.976 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:37:27.976Z,1516718247.976 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:37:27.976Z,1516718247.976 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:37:27.976Z,1516718247.976 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:37:28.333Z,1516718248.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:28.357Z,1516718248.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:28.360Z,1516718248.360 [Default:CheckIn:D] Stopped 2018-01-23T14:37:28.360Z,1516718248.360 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:37:28.737Z,1516718248.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:28.764Z,1516718248.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:28.767Z,1516718248.767 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.605013 min 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn:E] Stopped 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn] Stopped 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn](INFO): Running loop #67 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn] Running Loop=67 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:37:28.768Z,1516718248.768 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:37:29.137Z,1516718249.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:29.181Z,1516718249.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:32.236Z,1516718252.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:32.252Z,1516718252.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:32.365Z,1516718252.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:32.401Z,1516718252.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:32.734Z,1516718252.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:32.749Z,1516718252.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:33.136Z,1516718253.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:33.150Z,1516718253.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:33.534Z,1516718253.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:33.553Z,1516718253.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:33.932Z,1516718253.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:33.959Z,1516718253.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:34.333Z,1516718254.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:34.348Z,1516718254.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:34.734Z,1516718254.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:34.754Z,1516718254.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:35.135Z,1516718255.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:35.150Z,1516718255.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:35.536Z,1516718255.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:35.551Z,1516718255.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:35.932Z,1516718255.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:35.954Z,1516718255.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:36.331Z,1516718256.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:36.354Z,1516718256.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:36.737Z,1516718256.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:36.752Z,1516718256.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:37.132Z,1516718257.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:37.154Z,1516718257.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:37.531Z,1516718257.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:37.553Z,1516718257.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:37.938Z,1516718257.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:37.952Z,1516718257.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:38.338Z,1516718258.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:38.353Z,1516718258.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:38.748Z,1516718258.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:38.763Z,1516718258.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:39.138Z,1516718259.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:39.160Z,1516718259.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:39.533Z,1516718259.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:39.556Z,1516718259.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:39.942Z,1516718259.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:39.961Z,1516718259.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:40.338Z,1516718260.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:40.353Z,1516718260.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:40.736Z,1516718260.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:40.756Z,1516718260.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:41.143Z,1516718261.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:41.158Z,1516718261.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:41.536Z,1516718261.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:41.566Z,1516718261.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:41.942Z,1516718261.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:41.957Z,1516718261.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:42.332Z,1516718262.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:42.357Z,1516718262.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:42.738Z,1516718262.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:42.757Z,1516718262.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:43.126Z,1516718263.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:43.157Z,1516718263.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:43.546Z,1516718263.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:43.561Z,1516718263.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:43.945Z,1516718263.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:43.961Z,1516718263.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:44.326Z,1516718264.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:44.358Z,1516718264.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:44.729Z,1516718264.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:44.756Z,1516718264.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:45.129Z,1516718265.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:45.165Z,1516718265.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:45.526Z,1516718265.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:45.563Z,1516718265.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:45.929Z,1516718265.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:45.965Z,1516718265.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:46.328Z,1516718266.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:46.363Z,1516718266.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:46.728Z,1516718266.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:46.761Z,1516718266.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:47.128Z,1516718267.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:47.162Z,1516718267.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:47.528Z,1516718267.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:47.555Z,1516718267.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:47.928Z,1516718267.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:47.965Z,1516718267.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:48.332Z,1516718268.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:48.359Z,1516718268.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:48.728Z,1516718268.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:48.769Z,1516718268.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:49.125Z,1516718269.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:49.149Z,1516718269.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:49.528Z,1516718269.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:49.565Z,1516718269.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:49.928Z,1516718269.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:49.965Z,1516718269.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:50.325Z,1516718270.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:50.341Z,1516718270.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:50.736Z,1516718270.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:50.768Z,1516718270.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:51.128Z,1516718271.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:51.173Z,1516718271.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:51.525Z,1516718271.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:51.541Z,1516718271.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:51.928Z,1516718271.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:51.949Z,1516718271.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:52.336Z,1516718272.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:52.351Z,1516718272.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:52.729Z,1516718272.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:52.745Z,1516718272.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:53.133Z,1516718273.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:53.153Z,1516718273.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:53.537Z,1516718273.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:53.551Z,1516718273.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:53.937Z,1516718273.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:53.952Z,1516718273.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:54.334Z,1516718274.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:54.357Z,1516718274.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:54.735Z,1516718274.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:54.749Z,1516718274.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:55.109Z,1516718275.109 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:37:55.136Z,1516718275.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:55.156Z,1516718275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:55.532Z,1516718275.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:55.555Z,1516718275.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:55.939Z,1516718275.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:55.953Z,1516718275.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:56.333Z,1516718276.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:56.348Z,1516718276.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:56.734Z,1516718276.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:56.758Z,1516718276.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:57.136Z,1516718277.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:57.150Z,1516718277.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:57.533Z,1516718277.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:57.548Z,1516718277.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:57.934Z,1516718277.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:57.953Z,1516718277.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:58.336Z,1516718278.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:58.351Z,1516718278.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:58.725Z,1516718278.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:58.760Z,1516718278.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:59.140Z,1516718279.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:59.155Z,1516718279.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:59.536Z,1516718279.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:59.556Z,1516718279.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:37:59.940Z,1516718279.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:37:59.955Z,1516718279.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:00.332Z,1516718280.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:00.353Z,1516718280.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:00.737Z,1516718280.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:00.756Z,1516718280.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:01.125Z,1516718281.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:01.152Z,1516718281.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:01.531Z,1516718281.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:01.563Z,1516718281.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:01.936Z,1516718281.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:01.951Z,1516718281.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:02.336Z,1516718282.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:02.352Z,1516718282.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:02.731Z,1516718282.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:02.763Z,1516718282.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:03.136Z,1516718283.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:03.151Z,1516718283.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:03.536Z,1516718283.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:03.551Z,1516718283.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:03.931Z,1516718283.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:03.954Z,1516718283.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:04.336Z,1516718284.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:04.356Z,1516718284.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:04.736Z,1516718284.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:04.751Z,1516718284.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:05.131Z,1516718285.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:05.163Z,1516718285.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:05.547Z,1516718285.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:05.562Z,1516718285.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:05.912Z,1516718285.912 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:38:05.937Z,1516718285.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:05.959Z,1516718285.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:06.332Z,1516718286.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:06.365Z,1516718286.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:06.751Z,1516718286.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:06.766Z,1516718286.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:07.151Z,1516718287.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:07.166Z,1516718287.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:07.544Z,1516718287.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:07.575Z,1516718287.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:07.928Z,1516718287.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:07.955Z,1516718287.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:08.329Z,1516718288.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:08.360Z,1516718288.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:08.729Z,1516718288.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:08.755Z,1516718288.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:09.146Z,1516718289.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:09.169Z,1516718289.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:09.555Z,1516718289.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:09.570Z,1516718289.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:09.944Z,1516718289.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:09.966Z,1516718289.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:10.328Z,1516718290.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:10.355Z,1516718290.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:10.728Z,1516718290.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:10.761Z,1516718290.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:11.129Z,1516718291.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:11.165Z,1516718291.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:11.532Z,1516718291.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:11.560Z,1516718291.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:11.948Z,1516718291.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:11.963Z,1516718291.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:12.348Z,1516718292.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:12.370Z,1516718292.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:12.743Z,1516718292.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:12.769Z,1516718292.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:13.128Z,1516718293.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:13.161Z,1516718293.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:13.529Z,1516718293.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:13.565Z,1516718293.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:13.932Z,1516718293.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:13.965Z,1516718293.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:14.329Z,1516718294.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:14.360Z,1516718294.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:14.728Z,1516718294.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:14.765Z,1516718294.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:15.143Z,1516718295.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:15.170Z,1516718295.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:15.543Z,1516718295.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:15.570Z,1516718295.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:15.939Z,1516718295.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:15.966Z,1516718295.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:16.336Z,1516718296.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:16.373Z,1516718296.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:16.735Z,1516718296.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:16.750Z,1516718296.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:17.141Z,1516718297.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:17.156Z,1516718297.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:17.538Z,1516718297.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:17.553Z,1516718297.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:17.944Z,1516718297.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:17.959Z,1516718297.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:18.343Z,1516718298.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:18.358Z,1516718298.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:18.741Z,1516718298.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:18.768Z,1516718298.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:19.139Z,1516718299.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:19.154Z,1516718299.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:19.543Z,1516718299.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:19.565Z,1516718299.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:19.932Z,1516718299.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:19.965Z,1516718299.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:20.329Z,1516718300.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:20.364Z,1516718300.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:20.732Z,1516718300.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:20.761Z,1516718300.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:21.150Z,1516718301.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:21.179Z,1516718301.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:21.556Z,1516718301.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:21.571Z,1516718301.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:21.939Z,1516718301.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:21.973Z,1516718301.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:22.329Z,1516718302.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:22.365Z,1516718302.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:22.733Z,1516718302.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:22.764Z,1516718302.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:23.129Z,1516718303.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:23.144Z,1516718303.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:23.537Z,1516718303.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:23.573Z,1516718303.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:23.944Z,1516718303.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:23.975Z,1516718303.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:24.355Z,1516718304.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:24.380Z,1516718304.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:24.752Z,1516718304.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:24.783Z,1516718304.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:25.133Z,1516718305.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:25.157Z,1516718305.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:25.537Z,1516718305.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:25.552Z,1516718305.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:25.935Z,1516718305.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:25.951Z,1516718305.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:26.337Z,1516718306.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:26.352Z,1516718306.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:26.737Z,1516718306.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:26.756Z,1516718306.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:27.152Z,1516718307.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:27.183Z,1516718307.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:27.544Z,1516718307.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:27.559Z,1516718307.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:27.939Z,1516718307.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:27.960Z,1516718307.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:28.337Z,1516718308.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:28.353Z,1516718308.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:28.735Z,1516718308.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:28.750Z,1516718308.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:29.137Z,1516718309.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:29.151Z,1516718309.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:29.537Z,1516718309.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:29.552Z,1516718309.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:32.639Z,1516718312.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:32.655Z,1516718312.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:32.763Z,1516718312.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:32.788Z,1516718312.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:33.143Z,1516718313.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:33.158Z,1516718313.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:33.537Z,1516718313.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:33.552Z,1516718313.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:33.932Z,1516718313.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:33.947Z,1516718313.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:34.332Z,1516718314.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:34.347Z,1516718314.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:34.730Z,1516718314.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:34.754Z,1516718314.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:35.142Z,1516718315.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:35.161Z,1516718315.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:35.542Z,1516718315.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:35.557Z,1516718315.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:35.942Z,1516718315.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:35.957Z,1516718315.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:36.328Z,1516718316.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:36.350Z,1516718316.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:36.732Z,1516718316.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:36.752Z,1516718316.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:37.134Z,1516718317.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:37.149Z,1516718317.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:37.528Z,1516718317.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:37.546Z,1516718317.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:37.942Z,1516718317.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:37.957Z,1516718317.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:38.347Z,1516718318.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:38.362Z,1516718318.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:38.742Z,1516718318.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:38.757Z,1516718318.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:39.132Z,1516718319.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:39.152Z,1516718319.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:39.522Z,1516718319.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:39.553Z,1516718319.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:39.940Z,1516718319.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:39.961Z,1516718319.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:40.325Z,1516718320.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:40.360Z,1516718320.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:40.723Z,1516718320.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:40.761Z,1516718320.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:41.143Z,1516718321.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:41.158Z,1516718321.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:41.551Z,1516718321.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:41.566Z,1516718321.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:41.941Z,1516718321.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:41.961Z,1516718321.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:42.324Z,1516718322.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:42.351Z,1516718322.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:42.724Z,1516718322.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:42.761Z,1516718322.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:43.142Z,1516718323.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:43.157Z,1516718323.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:43.524Z,1516718323.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:43.557Z,1516718323.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:43.943Z,1516718323.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:43.959Z,1516718323.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:44.348Z,1516718324.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:44.363Z,1516718324.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:44.750Z,1516718324.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:44.769Z,1516718324.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:45.140Z,1516718325.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:45.161Z,1516718325.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:45.524Z,1516718325.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:45.556Z,1516718325.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:45.928Z,1516718325.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:45.954Z,1516718325.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:46.345Z,1516718326.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:46.361Z,1516718326.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:46.728Z,1516718326.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:46.765Z,1516718326.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:47.143Z,1516718327.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:47.158Z,1516718327.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:47.544Z,1516718327.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:47.571Z,1516718327.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:47.944Z,1516718327.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:47.960Z,1516718327.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:48.348Z,1516718328.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:48.369Z,1516718328.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:48.725Z,1516718328.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:48.762Z,1516718328.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:49.125Z,1516718329.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:49.160Z,1516718329.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:49.530Z,1516718329.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:49.559Z,1516718329.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:49.955Z,1516718329.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:49.970Z,1516718329.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:50.348Z,1516718330.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:50.364Z,1516718330.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:50.735Z,1516718330.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:50.769Z,1516718330.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:51.131Z,1516718331.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:51.159Z,1516718331.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:51.528Z,1516718331.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:51.564Z,1516718331.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:51.932Z,1516718331.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:51.964Z,1516718331.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:52.325Z,1516718332.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:52.341Z,1516718332.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:52.731Z,1516718332.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:52.746Z,1516718332.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:53.147Z,1516718333.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:53.174Z,1516718333.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:53.560Z,1516718333.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:53.575Z,1516718333.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:53.939Z,1516718333.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:53.970Z,1516718333.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:54.331Z,1516718334.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:54.346Z,1516718334.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:54.731Z,1516718334.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:54.754Z,1516718334.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:55.134Z,1516718335.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:55.172Z,1516718335.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:55.535Z,1516718335.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:55.550Z,1516718335.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:55.937Z,1516718335.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:55.952Z,1516718335.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:56.351Z,1516718336.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:56.378Z,1516718336.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:56.744Z,1516718336.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:56.758Z,1516718336.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:57.132Z,1516718337.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:57.152Z,1516718337.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:57.542Z,1516718337.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:57.557Z,1516718337.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:57.936Z,1516718337.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:57.951Z,1516718337.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:58.337Z,1516718338.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:58.352Z,1516718338.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:58.738Z,1516718338.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:58.797Z,1516718338.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:59.140Z,1516718339.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:59.161Z,1516718339.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:59.543Z,1516718339.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:59.559Z,1516718339.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:38:59.943Z,1516718339.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:38:59.958Z,1516718339.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:00.337Z,1516718340.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:00.352Z,1516718340.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:00.736Z,1516718340.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:00.750Z,1516718340.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:01.137Z,1516718341.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:01.152Z,1516718341.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:01.533Z,1516718341.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:01.554Z,1516718341.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:01.942Z,1516718341.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:01.957Z,1516718341.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:02.346Z,1516718342.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:02.361Z,1516718342.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:02.742Z,1516718342.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:02.769Z,1516718342.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:03.136Z,1516718343.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:03.151Z,1516718343.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:03.541Z,1516718343.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:03.557Z,1516718343.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:03.944Z,1516718343.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:03.965Z,1516718343.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:04.337Z,1516718344.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:04.352Z,1516718344.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:04.737Z,1516718344.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:04.752Z,1516718344.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:05.146Z,1516718345.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:05.162Z,1516718345.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:05.550Z,1516718345.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:05.565Z,1516718345.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:05.944Z,1516718345.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:05.962Z,1516718345.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:06.326Z,1516718346.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:06.361Z,1516718346.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:06.726Z,1516718346.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:06.762Z,1516718346.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:07.125Z,1516718347.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:07.165Z,1516718347.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:07.530Z,1516718347.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:07.559Z,1516718347.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:07.936Z,1516718347.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:07.976Z,1516718347.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:08.349Z,1516718348.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:08.365Z,1516718348.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:08.736Z,1516718348.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:08.777Z,1516718348.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:09.134Z,1516718349.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:09.170Z,1516718349.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:09.534Z,1516718349.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:09.566Z,1516718349.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:09.934Z,1516718349.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:09.977Z,1516718349.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:10.333Z,1516718350.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:10.368Z,1516718350.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:10.734Z,1516718350.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:10.743Z,1516718350.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17282 2018-01-23T14:39:10.781Z,1516718350.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:11.147Z,1516718351.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:11.174Z,1516718351.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:11.543Z,1516718351.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:11.570Z,1516718351.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:11.943Z,1516718351.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:11.973Z,1516718351.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:12.328Z,1516718352.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:12.373Z,1516718352.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:12.730Z,1516718352.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:12.738Z,1516718352.738 [PNI_TCM](ERROR): CRC does not match. Expected:0x8309 got:0x33936 2018-01-23T14:39:12.777Z,1516718352.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:13.136Z,1516718353.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:13.171Z,1516718353.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:13.532Z,1516718353.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:13.576Z,1516718353.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:13.949Z,1516718353.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:13.974Z,1516718353.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:14.348Z,1516718354.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:14.373Z,1516718354.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:14.751Z,1516718354.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:14.781Z,1516718354.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:15.136Z,1516718355.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:15.171Z,1516718355.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:15.532Z,1516718355.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:15.551Z,1516718355.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:15.931Z,1516718355.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:15.953Z,1516718355.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:16.334Z,1516718356.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:16.349Z,1516718356.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:16.733Z,1516718356.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:16.780Z,1516718356.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:17.140Z,1516718357.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:17.158Z,1516718357.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:17.541Z,1516718357.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:17.556Z,1516718357.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:17.939Z,1516718357.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:17.962Z,1516718357.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:18.327Z,1516718358.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:18.364Z,1516718358.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:18.736Z,1516718358.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:18.755Z,1516718358.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:19.140Z,1516718359.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:19.156Z,1516718359.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:19.528Z,1516718359.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:19.561Z,1516718359.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:19.947Z,1516718359.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:19.973Z,1516718359.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:20.354Z,1516718360.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:20.362Z,1516718360.362 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T14:39:20.398Z,1516718360.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:20.746Z,1516718360.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:20.761Z,1516718360.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:21.124Z,1516718361.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:21.157Z,1516718361.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:21.529Z,1516718361.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:21.573Z,1516718361.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:21.928Z,1516718361.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:21.958Z,1516718361.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:22.325Z,1516718362.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:22.360Z,1516718362.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:22.729Z,1516718362.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:22.759Z,1516718362.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:23.141Z,1516718363.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:23.177Z,1516718363.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:23.552Z,1516718363.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:23.569Z,1516718363.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:23.951Z,1516718363.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:23.966Z,1516718363.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:24.325Z,1516718364.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:24.357Z,1516718364.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:24.728Z,1516718364.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:24.768Z,1516718364.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:25.129Z,1516718365.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:25.160Z,1516718365.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:25.163Z,1516718365.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:25.163Z,1516718365.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 227 2018-01-23T14:39:25.163Z,1516718365.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:39:25.175Z,1516718365.175 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:39:25.532Z,1516718365.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:25.562Z,1516718365.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:25.574Z,1516718365.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:39:25.575Z,1516718365.575 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 227 2018-01-23T14:39:25.935Z,1516718365.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:25.971Z,1516718365.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:25.972Z,1516718365.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:39:25.973Z,1516718365.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:39:25.973Z,1516718365.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:39:26.352Z,1516718366.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:26.385Z,1516718366.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:26.747Z,1516718366.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:26.766Z,1516718366.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:27.124Z,1516718367.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:27.165Z,1516718367.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:27.529Z,1516718367.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:27.564Z,1516718367.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:27.924Z,1516718367.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:27.961Z,1516718367.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:28.325Z,1516718368.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:28.364Z,1516718368.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:28.729Z,1516718368.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:28.765Z,1516718368.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:29.135Z,1516718369.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:29.176Z,1516718369.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:29.542Z,1516718369.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:29.581Z,1516718369.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:29.940Z,1516718369.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:29.971Z,1516718369.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.025Z,1516718373.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:33.041Z,1516718373.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.156Z,1516718373.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:33.192Z,1516718373.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.535Z,1516718373.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:33.572Z,1516718373.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.939Z,1516718373.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:33.972Z,1516718373.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.972Z,1516718373.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 227 2018-01-23T14:39:33.972Z,1516718373.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:39:33.974Z,1516718373.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:33.974Z,1516718373.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 227 2018-01-23T14:39:33.974Z,1516718373.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:39:33.987Z,1516718373.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:39:33.987Z,1516718373.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:39:34.339Z,1516718374.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:34.403Z,1516718374.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:39:34.403Z,1516718374.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 227 2018-01-23T14:39:34.403Z,1516718374.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:39:34.403Z,1516718374.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 227 2018-01-23T14:39:34.726Z,1516718374.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:34.748Z,1516718374.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:39:34.748Z,1516718374.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:39:34.748Z,1516718374.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:39:34.749Z,1516718374.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:39:34.749Z,1516718374.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:39:34.749Z,1516718374.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:39:35.120Z,1516718375.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:35.156Z,1516718375.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:39:35.158Z,1516718375.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:35.531Z,1516718375.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:35.545Z,1516718375.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:39:35.546Z,1516718375.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:35.938Z,1516718375.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:35.952Z,1516718375.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:39:35.953Z,1516718375.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:36.340Z,1516718376.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:36.355Z,1516718376.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:39:36.356Z,1516718376.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:36.735Z,1516718376.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:36.764Z,1516718376.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:39:36.766Z,1516718376.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:37.118Z,1516718377.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:37.145Z,1516718377.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:39:37.146Z,1516718377.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:37.517Z,1516718377.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:37.551Z,1516718377.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:39:37.552Z,1516718377.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:37.936Z,1516718377.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:37.951Z,1516718377.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:39:37.952Z,1516718377.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:38.340Z,1516718378.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:38.355Z,1516718378.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:39:38.356Z,1516718378.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:38.732Z,1516718378.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:38.762Z,1516718378.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:39:38.767Z,1516718378.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:39.121Z,1516718379.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:39.147Z,1516718379.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:39:39.148Z,1516718379.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:39.516Z,1516718379.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:39.552Z,1516718379.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:39:39.552Z,1516718379.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:39.934Z,1516718379.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:39.964Z,1516718379.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:39:39.965Z,1516718379.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:40.343Z,1516718380.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:40.361Z,1516718380.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:39:40.362Z,1516718380.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:40.736Z,1516718380.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:40.750Z,1516718380.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:39:40.752Z,1516718380.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:41.118Z,1516718381.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:41.145Z,1516718381.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:39:41.146Z,1516718381.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:41.517Z,1516718381.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:41.544Z,1516718381.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:39:41.545Z,1516718381.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:41.939Z,1516718381.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:41.973Z,1516718381.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:39:41.974Z,1516718381.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:42.340Z,1516718382.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:42.365Z,1516718382.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:39:42.366Z,1516718382.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:42.739Z,1516718382.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:42.768Z,1516718382.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:39:42.769Z,1516718382.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:43.130Z,1516718383.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:43.144Z,1516718383.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:39:43.145Z,1516718383.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:43.525Z,1516718383.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:43.544Z,1516718383.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:39:43.545Z,1516718383.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:43.931Z,1516718383.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:43.946Z,1516718383.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:39:43.947Z,1516718383.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:44.332Z,1516718384.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:44.352Z,1516718384.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:39:44.353Z,1516718384.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:44.732Z,1516718384.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:44.752Z,1516718384.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:39:44.753Z,1516718384.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:45.127Z,1516718385.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:45.143Z,1516718385.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:39:45.144Z,1516718385.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:45.525Z,1516718385.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:45.539Z,1516718385.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:39:45.540Z,1516718385.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:45.930Z,1516718385.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:45.945Z,1516718385.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:39:45.946Z,1516718385.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:46.333Z,1516718386.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:46.348Z,1516718386.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:39:46.349Z,1516718386.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:46.729Z,1516718386.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:46.757Z,1516718386.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:39:46.758Z,1516718386.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:47.121Z,1516718387.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:47.144Z,1516718387.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:39:47.145Z,1516718387.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:47.524Z,1516718387.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:47.539Z,1516718387.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:39:47.540Z,1516718387.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:47.934Z,1516718387.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:47.949Z,1516718387.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:39:47.949Z,1516718387.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:48.333Z,1516718388.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:48.352Z,1516718388.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:39:48.353Z,1516718388.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:48.735Z,1516718388.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:48.749Z,1516718388.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:39:48.750Z,1516718388.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:49.126Z,1516718389.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:49.141Z,1516718389.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:39:49.141Z,1516718389.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:49.520Z,1516718389.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:49.552Z,1516718389.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:39:49.553Z,1516718389.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:49.934Z,1516718389.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:49.950Z,1516718389.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:39:49.951Z,1516718389.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:50.339Z,1516718390.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:50.360Z,1516718390.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:39:50.361Z,1516718390.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:50.739Z,1516718390.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:50.754Z,1516718390.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:39:50.755Z,1516718390.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:51.117Z,1516718391.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:51.148Z,1516718391.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:39:51.149Z,1516718391.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:51.516Z,1516718391.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:51.548Z,1516718391.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:39:51.549Z,1516718391.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:51.935Z,1516718391.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:51.950Z,1516718391.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:39:51.951Z,1516718391.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:52.339Z,1516718392.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:52.353Z,1516718392.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:39:52.354Z,1516718392.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:52.730Z,1516718392.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:52.761Z,1516718392.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:39:52.762Z,1516718392.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:53.116Z,1516718393.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:53.143Z,1516718393.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:39:53.144Z,1516718393.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:53.517Z,1516718393.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:53.548Z,1516718393.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:39:53.549Z,1516718393.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:53.917Z,1516718393.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:53.952Z,1516718393.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:39:53.953Z,1516718393.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:54.336Z,1516718394.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:54.351Z,1516718394.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:54.738Z,1516718394.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:54.754Z,1516718394.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:55.136Z,1516718395.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:55.151Z,1516718395.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:55.516Z,1516718395.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:55.553Z,1516718395.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:55.916Z,1516718395.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:55.949Z,1516718395.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:56.317Z,1516718396.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:56.353Z,1516718396.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:56.716Z,1516718396.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:56.757Z,1516718396.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:57.139Z,1516718397.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:57.154Z,1516718397.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:57.539Z,1516718397.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:57.554Z,1516718397.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:57.935Z,1516718397.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:57.950Z,1516718397.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:58.316Z,1516718398.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:58.349Z,1516718398.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:58.720Z,1516718398.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:58.757Z,1516718398.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:59.125Z,1516718399.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:59.153Z,1516718399.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:59.516Z,1516718399.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:59.539Z,1516718399.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:39:59.927Z,1516718399.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:39:59.961Z,1516718399.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:00.344Z,1516718400.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:00.359Z,1516718400.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:00.726Z,1516718400.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:00.757Z,1516718400.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:01.121Z,1516718401.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:01.136Z,1516718401.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:01.520Z,1516718401.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:01.557Z,1516718401.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:01.935Z,1516718401.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:01.961Z,1516718401.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:02.335Z,1516718402.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:02.361Z,1516718402.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:02.735Z,1516718402.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:02.761Z,1516718402.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:03.119Z,1516718403.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:03.141Z,1516718403.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:03.525Z,1516718403.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:03.540Z,1516718403.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:03.924Z,1516718403.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:03.939Z,1516718403.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:04.331Z,1516718404.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:04.346Z,1516718404.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:04.735Z,1516718404.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:04.749Z,1516718404.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:05.127Z,1516718405.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:05.143Z,1516718405.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:05.523Z,1516718405.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:05.538Z,1516718405.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:05.924Z,1516718405.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:05.944Z,1516718405.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:06.322Z,1516718406.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:06.348Z,1516718406.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:06.725Z,1516718406.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:06.740Z,1516718406.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:07.127Z,1516718407.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:07.142Z,1516718407.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:07.531Z,1516718407.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:07.546Z,1516718407.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:07.927Z,1516718407.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:07.942Z,1516718407.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:08.324Z,1516718408.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:08.352Z,1516718408.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:08.726Z,1516718408.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:08.741Z,1516718408.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:09.124Z,1516718409.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:09.139Z,1516718409.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:09.526Z,1516718409.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:09.540Z,1516718409.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:09.924Z,1516718409.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:09.939Z,1516718409.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:10.327Z,1516718410.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:10.342Z,1516718410.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:10.731Z,1516718410.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:10.745Z,1516718410.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:11.128Z,1516718411.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:11.143Z,1516718411.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:11.524Z,1516718411.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:11.538Z,1516718411.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:11.927Z,1516718411.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:11.941Z,1516718411.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:12.324Z,1516718412.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:12.347Z,1516718412.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:12.724Z,1516718412.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:12.743Z,1516718412.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:13.131Z,1516718413.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:13.152Z,1516718413.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:13.531Z,1516718413.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:13.546Z,1516718413.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:13.931Z,1516718413.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:13.946Z,1516718413.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:14.326Z,1516718414.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:14.341Z,1516718414.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:14.725Z,1516718414.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:14.741Z,1516718414.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:15.125Z,1516718415.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:15.141Z,1516718415.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:15.527Z,1516718415.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:15.541Z,1516718415.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:15.920Z,1516718415.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:15.953Z,1516718415.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:16.334Z,1516718416.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:16.357Z,1516718416.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:16.735Z,1516718416.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:16.750Z,1516718416.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:17.132Z,1516718417.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:17.161Z,1516718417.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:17.529Z,1516718417.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:17.544Z,1516718417.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:17.925Z,1516718417.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:17.944Z,1516718417.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:18.329Z,1516718418.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:18.345Z,1516718418.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:18.725Z,1516718418.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:18.741Z,1516718418.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:19.136Z,1516718419.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:19.151Z,1516718419.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:19.534Z,1516718419.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:19.550Z,1516718419.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:19.935Z,1516718419.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:19.950Z,1516718419.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:20.326Z,1516718420.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:20.344Z,1516718420.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:20.729Z,1516718420.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:20.744Z,1516718420.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:21.125Z,1516718421.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:21.140Z,1516718421.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:21.527Z,1516718421.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:21.548Z,1516718421.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:21.926Z,1516718421.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:21.945Z,1516718421.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:22.344Z,1516718422.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:22.359Z,1516718422.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:22.739Z,1516718422.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:22.760Z,1516718422.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:23.136Z,1516718423.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:23.157Z,1516718423.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:23.528Z,1516718423.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:23.544Z,1516718423.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:23.926Z,1516718423.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:23.941Z,1516718423.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:24.324Z,1516718424.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:24.345Z,1516718424.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:24.724Z,1516718424.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:24.739Z,1516718424.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:25.136Z,1516718425.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:25.151Z,1516718425.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:25.534Z,1516718425.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:25.550Z,1516718425.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:25.935Z,1516718425.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:25.950Z,1516718425.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:26.323Z,1516718426.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:26.348Z,1516718426.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:26.714Z,1516718426.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:26.742Z,1516718426.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:27.125Z,1516718427.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:27.140Z,1516718427.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:27.526Z,1516718427.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:27.544Z,1516718427.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:27.928Z,1516718427.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:27.943Z,1516718427.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:28.335Z,1516718428.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:28.350Z,1516718428.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:28.738Z,1516718428.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:28.760Z,1516718428.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:29.134Z,1516718429.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:29.149Z,1516718429.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:29.524Z,1516718429.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:29.539Z,1516718429.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:29.925Z,1516718429.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:29.944Z,1516718429.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:30.330Z,1516718430.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:30.346Z,1516718430.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:33.432Z,1516718433.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:33.448Z,1516718433.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:33.574Z,1516718433.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:33.609Z,1516718433.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:33.911Z,1516718433.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:33.936Z,1516718433.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:34.312Z,1516718434.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:34.337Z,1516718434.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:34.697Z,1516718434.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:34.717Z,1516718434.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:35.093Z,1516718435.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:35.108Z,1516718435.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:35.494Z,1516718435.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:35.510Z,1516718435.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:35.893Z,1516718435.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:35.912Z,1516718435.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:36.311Z,1516718436.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:36.326Z,1516718436.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:36.703Z,1516718436.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:36.718Z,1516718436.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:37.102Z,1516718437.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:37.117Z,1516718437.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:37.496Z,1516718437.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:37.517Z,1516718437.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:37.898Z,1516718437.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:37.913Z,1516718437.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:38.296Z,1516718438.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:38.315Z,1516718438.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:38.696Z,1516718438.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:38.717Z,1516718438.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:39.103Z,1516718439.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:39.118Z,1516718439.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:39.503Z,1516718439.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:39.518Z,1516718439.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:39.902Z,1516718439.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:39.921Z,1516718439.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:40.298Z,1516718440.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:40.313Z,1516718440.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:40.696Z,1516718440.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:40.717Z,1516718440.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:41.096Z,1516718441.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:41.115Z,1516718441.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:41.493Z,1516718441.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:41.520Z,1516718441.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:41.897Z,1516718441.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:41.912Z,1516718441.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:42.308Z,1516718442.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:42.323Z,1516718442.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:42.707Z,1516718442.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:42.729Z,1516718442.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:43.106Z,1516718443.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:43.121Z,1516718443.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:43.499Z,1516718443.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:43.513Z,1516718443.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:43.893Z,1516718443.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:43.920Z,1516718443.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:44.302Z,1516718444.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:44.325Z,1516718444.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:44.695Z,1516718444.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:44.717Z,1516718444.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:45.106Z,1516718445.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:45.130Z,1516718445.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:45.514Z,1516718445.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:45.529Z,1516718445.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:45.910Z,1516718445.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:45.929Z,1516718445.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:46.289Z,1516718446.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:46.321Z,1516718446.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:46.712Z,1516718446.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:46.733Z,1516718446.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:47.107Z,1516718447.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:47.129Z,1516718447.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:47.490Z,1516718447.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:47.529Z,1516718447.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:47.893Z,1516718447.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:47.921Z,1516718447.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:48.303Z,1516718448.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:48.336Z,1516718448.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:48.713Z,1516718448.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:48.729Z,1516718448.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:49.104Z,1516718449.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:49.127Z,1516718449.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:49.488Z,1516718449.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:49.521Z,1516718449.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:49.889Z,1516718449.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:49.923Z,1516718449.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:50.289Z,1516718450.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:50.325Z,1516718450.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:50.693Z,1516718450.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:50.728Z,1516718450.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:51.098Z,1516718451.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:51.131Z,1516718451.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:51.503Z,1516718451.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:51.537Z,1516718451.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:51.899Z,1516718451.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:51.925Z,1516718451.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:52.289Z,1516718452.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:52.335Z,1516718452.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:52.689Z,1516718452.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:52.704Z,1516718452.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:53.089Z,1516718453.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:53.104Z,1516718453.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:53.494Z,1516718453.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:53.539Z,1516718453.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:53.897Z,1516718453.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:53.933Z,1516718453.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:54.307Z,1516718454.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:54.338Z,1516718454.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:54.711Z,1516718454.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:54.745Z,1516718454.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:55.111Z,1516718455.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:55.142Z,1516718455.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:55.494Z,1516718455.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:55.513Z,1516718455.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:55.897Z,1516718455.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:55.912Z,1516718455.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:56.294Z,1516718456.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:56.325Z,1516718456.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:56.696Z,1516718456.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:56.715Z,1516718456.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:57.105Z,1516718457.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:57.131Z,1516718457.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:57.506Z,1516718457.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:57.521Z,1516718457.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:57.907Z,1516718457.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:57.922Z,1516718457.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:58.297Z,1516718458.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:58.313Z,1516718458.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:58.695Z,1516718458.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:58.717Z,1516718458.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:59.091Z,1516718459.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:59.125Z,1516718459.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:59.493Z,1516718459.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:59.521Z,1516718459.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:40:59.893Z,1516718459.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:40:59.919Z,1516718459.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:00.304Z,1516718460.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:00.326Z,1516718460.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:00.711Z,1516718460.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:00.733Z,1516718460.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:01.107Z,1516718461.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:01.122Z,1516718461.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:01.488Z,1516718461.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:01.521Z,1516718461.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:01.888Z,1516718461.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:01.932Z,1516718461.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:02.290Z,1516718462.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:02.321Z,1516718462.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:02.693Z,1516718462.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:02.725Z,1516718462.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:03.099Z,1516718463.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:03.134Z,1516718463.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:03.511Z,1516718463.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:03.527Z,1516718463.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:03.899Z,1516718463.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:03.934Z,1516718463.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:04.289Z,1516718464.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:04.325Z,1516718464.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:04.693Z,1516718464.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:04.724Z,1516718464.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:05.089Z,1516718465.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:05.120Z,1516718465.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:05.489Z,1516718465.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:05.504Z,1516718465.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:05.889Z,1516718465.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:05.904Z,1516718465.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:06.311Z,1516718466.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:06.341Z,1516718466.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:06.707Z,1516718466.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:06.732Z,1516718466.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:07.107Z,1516718467.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:07.132Z,1516718467.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:07.500Z,1516718467.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:07.535Z,1516718467.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:07.893Z,1516718467.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:07.912Z,1516718467.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:08.290Z,1516718468.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:08.305Z,1516718468.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:08.700Z,1516718468.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:08.734Z,1516718468.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:09.107Z,1516718469.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:09.138Z,1516718469.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:09.511Z,1516718469.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:09.541Z,1516718469.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:09.911Z,1516718469.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:09.941Z,1516718469.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:10.294Z,1516718470.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:10.312Z,1516718470.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:10.694Z,1516718470.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:10.709Z,1516718470.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:11.093Z,1516718471.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:11.113Z,1516718471.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:11.494Z,1516718471.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:11.520Z,1516718471.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:11.894Z,1516718471.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:11.913Z,1516718471.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:12.303Z,1516718472.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:12.319Z,1516718472.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:12.703Z,1516718472.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:12.743Z,1516718472.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:13.111Z,1516718473.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:13.142Z,1516718473.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:13.502Z,1516718473.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:13.544Z,1516718473.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:13.903Z,1516718473.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:13.918Z,1516718473.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:14.309Z,1516718474.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:14.324Z,1516718474.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:14.700Z,1516718474.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:14.724Z,1516718474.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:15.114Z,1516718475.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:15.141Z,1516718475.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:15.536Z,1516718475.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:15.585Z,1516718475.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:15.930Z,1516718475.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:15.977Z,1516718475.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:16.299Z,1516718476.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:16.368Z,1516718476.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:16.700Z,1516718476.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:16.721Z,1516718476.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:17.114Z,1516718477.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:17.151Z,1516718477.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:17.498Z,1516718477.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:17.520Z,1516718477.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:17.893Z,1516718477.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:17.918Z,1516718477.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:18.314Z,1516718478.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:18.333Z,1516718478.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:18.714Z,1516718478.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:18.740Z,1516718478.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:19.124Z,1516718479.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:19.169Z,1516718479.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:19.494Z,1516718479.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:19.537Z,1516718479.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:19.898Z,1516718479.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:19.937Z,1516718479.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:20.295Z,1516718480.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:20.343Z,1516718480.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:20.693Z,1516718480.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:20.765Z,1516718480.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:21.101Z,1516718481.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:21.188Z,1516718481.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:21.518Z,1516718481.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:21.550Z,1516718481.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:21.909Z,1516718481.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:21.945Z,1516718481.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:22.293Z,1516718482.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:22.324Z,1516718482.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:22.699Z,1516718482.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:22.727Z,1516718482.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:23.113Z,1516718483.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:23.129Z,1516718483.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:23.514Z,1516718483.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:23.568Z,1516718483.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:23.910Z,1516718483.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:23.926Z,1516718483.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:24.305Z,1516718484.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:24.324Z,1516718484.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:24.694Z,1516718484.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:24.737Z,1516718484.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:25.101Z,1516718485.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:25.136Z,1516718485.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:25.528Z,1516718485.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:25.573Z,1516718485.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:25.905Z,1516718485.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:25.960Z,1516718485.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:26.298Z,1516718486.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:26.322Z,1516718486.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:26.704Z,1516718486.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:26.727Z,1516718486.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:27.111Z,1516718487.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:27.140Z,1516718487.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:27.514Z,1516718487.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:27.534Z,1516718487.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:27.914Z,1516718487.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:27.945Z,1516718487.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:28.291Z,1516718488.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:28.348Z,1516718488.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:28.695Z,1516718488.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:28.741Z,1516718488.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:29.129Z,1516718489.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:29.153Z,1516718489.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:29.509Z,1516718489.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:29.583Z,1516718489.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:29.902Z,1516718489.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:29.940Z,1516718489.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:30.336Z,1516718490.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:30.351Z,1516718490.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:30.695Z,1516718490.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:30.709Z,1516718490.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:33.824Z,1516718493.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:33.840Z,1516718493.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:33.964Z,1516718493.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:34.009Z,1516718494.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:34.304Z,1516718494.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:34.318Z,1516718494.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:34.699Z,1516718494.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:34.714Z,1516718494.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:35.094Z,1516718495.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:35.141Z,1516718495.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:35.486Z,1516718495.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:35.509Z,1516718495.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:35.894Z,1516718495.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:35.909Z,1516718495.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:36.298Z,1516718496.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:36.313Z,1516718496.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:36.698Z,1516718496.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:36.713Z,1516718496.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:37.099Z,1516718497.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:37.120Z,1516718497.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:37.493Z,1516718497.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:37.513Z,1516718497.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:37.893Z,1516718497.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:37.913Z,1516718497.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:38.290Z,1516718498.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:38.305Z,1516718498.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:38.686Z,1516718498.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:38.713Z,1516718498.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:39.097Z,1516718499.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:39.117Z,1516718499.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:39.498Z,1516718499.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:39.513Z,1516718499.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:39.898Z,1516718499.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:39.921Z,1516718499.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:40.293Z,1516718500.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:40.308Z,1516718500.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:40.689Z,1516718500.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:40.708Z,1516718500.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:41.098Z,1516718501.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:41.113Z,1516718501.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:41.502Z,1516718501.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:41.517Z,1516718501.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:41.898Z,1516718501.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:41.925Z,1516718501.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:42.292Z,1516718502.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:42.317Z,1516718502.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:42.697Z,1516718502.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:42.713Z,1516718502.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:43.080Z,1516718503.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:43.116Z,1516718503.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:43.503Z,1516718503.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:43.518Z,1516718503.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:43.903Z,1516718503.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:43.918Z,1516718503.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:44.297Z,1516718504.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:44.324Z,1516718504.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:44.681Z,1516718504.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:44.713Z,1516718504.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:45.080Z,1516718505.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:45.113Z,1516718505.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:45.481Z,1516718505.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:45.508Z,1516718505.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:45.880Z,1516718505.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:45.913Z,1516718505.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:46.300Z,1516718506.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:46.314Z,1516718506.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:46.704Z,1516718506.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:46.718Z,1516718506.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:47.099Z,1516718507.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:47.114Z,1516718507.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:47.496Z,1516718507.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:47.517Z,1516718507.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:47.881Z,1516718507.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:47.908Z,1516718507.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:48.281Z,1516718508.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:48.313Z,1516718508.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:48.681Z,1516718508.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:48.713Z,1516718508.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:49.084Z,1516718509.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:49.112Z,1516718509.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:49.503Z,1516718509.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:49.525Z,1516718509.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:49.904Z,1516718509.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:49.918Z,1516718509.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:50.294Z,1516718510.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:50.326Z,1516718510.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:50.681Z,1516718510.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:50.707Z,1516718510.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:51.080Z,1516718511.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:51.113Z,1516718511.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:51.481Z,1516718511.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:51.520Z,1516718511.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:51.880Z,1516718511.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:51.907Z,1516718511.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:52.298Z,1516718512.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:52.321Z,1516718512.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:52.708Z,1516718512.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:52.723Z,1516718512.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:53.104Z,1516718513.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:53.118Z,1516718513.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:53.519Z,1516718513.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:53.534Z,1516718513.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:53.887Z,1516718513.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:53.922Z,1516718513.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:54.289Z,1516718514.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:54.322Z,1516718514.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:54.693Z,1516718514.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:54.723Z,1516718514.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:55.087Z,1516718515.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:55.171Z,1516718515.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:55.510Z,1516718515.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:55.525Z,1516718515.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:55.914Z,1516718515.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:55.929Z,1516718515.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:56.291Z,1516718516.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:56.320Z,1516718516.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:56.682Z,1516718516.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:56.701Z,1516718516.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:57.088Z,1516718517.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:57.125Z,1516718517.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:57.489Z,1516718517.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:57.504Z,1516718517.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:57.905Z,1516718517.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:58.058Z,1516718518.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:58.300Z,1516718518.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:58.331Z,1516718518.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:58.695Z,1516718518.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:58.710Z,1516718518.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:59.092Z,1516718519.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:59.108Z,1516718519.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:59.488Z,1516718519.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:59.503Z,1516718519.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:41:59.887Z,1516718519.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:41:59.915Z,1516718519.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:00.290Z,1516718520.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:00.305Z,1516718520.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:00.686Z,1516718520.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:00.709Z,1516718520.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:01.088Z,1516718521.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:01.104Z,1516718521.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:01.494Z,1516718521.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:01.510Z,1516718521.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:01.895Z,1516718521.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:01.917Z,1516718521.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:02.295Z,1516718522.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:02.313Z,1516718522.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:02.687Z,1516718522.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:02.702Z,1516718522.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:03.085Z,1516718523.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:03.108Z,1516718523.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:03.491Z,1516718523.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:03.506Z,1516718523.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:03.889Z,1516718523.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:03.904Z,1516718523.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:04.300Z,1516718524.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:04.315Z,1516718524.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:04.699Z,1516718524.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:04.714Z,1516718524.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:05.095Z,1516718525.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:05.125Z,1516718525.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:05.492Z,1516718525.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:05.513Z,1516718525.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:05.890Z,1516718525.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:05.912Z,1516718525.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:06.278Z,1516718526.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:06.305Z,1516718526.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:06.700Z,1516718526.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:06.721Z,1516718526.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:07.094Z,1516718527.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:07.109Z,1516718527.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:07.499Z,1516718527.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:07.514Z,1516718527.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:07.902Z,1516718527.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:07.917Z,1516718527.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:08.300Z,1516718528.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:08.315Z,1516718528.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:08.678Z,1516718528.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:08.710Z,1516718528.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:09.092Z,1516718529.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:09.110Z,1516718529.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:09.481Z,1516718529.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:09.517Z,1516718529.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:09.880Z,1516718529.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:09.913Z,1516718529.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:10.296Z,1516718530.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:10.317Z,1516718530.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:10.704Z,1516718530.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:10.724Z,1516718530.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:11.092Z,1516718531.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:11.115Z,1516718531.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:11.492Z,1516718531.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:11.509Z,1516718531.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:11.886Z,1516718531.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:11.901Z,1516718531.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:12.283Z,1516718532.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:12.304Z,1516718532.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:12.687Z,1516718532.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:12.709Z,1516718532.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:13.089Z,1516718533.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:13.103Z,1516718533.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:13.500Z,1516718533.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:13.523Z,1516718533.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:13.896Z,1516718533.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:13.911Z,1516718533.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:14.292Z,1516718534.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:14.313Z,1516718534.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:14.686Z,1516718534.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:14.702Z,1516718534.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:15.087Z,1516718535.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:15.103Z,1516718535.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:15.489Z,1516718535.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:15.509Z,1516718535.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:15.889Z,1516718535.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:15.905Z,1516718535.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:16.291Z,1516718536.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:16.306Z,1516718536.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:16.695Z,1516718536.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:16.713Z,1516718536.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:17.094Z,1516718537.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:17.109Z,1516718537.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:17.488Z,1516718537.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:17.503Z,1516718537.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:17.889Z,1516718537.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:17.904Z,1516718537.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:18.284Z,1516718538.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:18.304Z,1516718538.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:18.685Z,1516718538.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:18.706Z,1516718538.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:19.089Z,1516718539.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:19.104Z,1516718539.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:19.493Z,1516718539.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:19.513Z,1516718539.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:19.895Z,1516718539.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:19.910Z,1516718539.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:20.294Z,1516718540.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:20.309Z,1516718540.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:20.688Z,1516718540.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:20.703Z,1516718540.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:21.088Z,1516718541.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:21.102Z,1516718541.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:21.489Z,1516718541.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:21.504Z,1516718541.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:21.888Z,1516718541.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:21.903Z,1516718541.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:22.293Z,1516718542.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:22.313Z,1516718542.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:22.694Z,1516718542.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:22.713Z,1516718542.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:23.094Z,1516718543.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:23.113Z,1516718543.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:23.492Z,1516718543.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:23.507Z,1516718543.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:23.889Z,1516718543.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:23.904Z,1516718543.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:24.284Z,1516718544.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:24.304Z,1516718544.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:24.684Z,1516718544.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:24.713Z,1516718544.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:25.093Z,1516718545.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:25.108Z,1516718545.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:25.495Z,1516718545.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:25.523Z,1516718545.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:25.910Z,1516718545.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:25.929Z,1516718545.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:26.300Z,1516718546.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:26.315Z,1516718546.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:26.317Z,1516718546.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:26.317Z,1516718546.317 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 228 2018-01-23T14:42:26.317Z,1516718546.317 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:42:26.328Z,1516718546.328 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:42:26.681Z,1516718546.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:26.713Z,1516718546.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:26.734Z,1516718546.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:42:26.734Z,1516718546.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 228 2018-01-23T14:42:27.080Z,1516718547.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:27.117Z,1516718547.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:27.118Z,1516718547.118 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:42:27.119Z,1516718547.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:42:27.119Z,1516718547.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:42:27.481Z,1516718547.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:27.518Z,1516718547.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:27.880Z,1516718547.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:27.917Z,1516718547.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:28.291Z,1516718548.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:28.318Z,1516718548.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:28.704Z,1516718548.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:28.719Z,1516718548.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:29.103Z,1516718549.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:29.118Z,1516718549.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:29.121Z,1516718549.121 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:37:28.8Z 2018-01-23T14:42:29.122Z,1516718549.122 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:42:29.122Z,1516718549.122 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:42:29.480Z,1516718549.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:29.517Z,1516718549.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:30.012Z,1516718550.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:30.027Z,1516718550.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:30.281Z,1516718550.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:30.317Z,1516718550.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:33.402Z,1516718553.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:33.417Z,1516718553.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:33.500Z,1516718553.500 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0268.lzma 2018-01-23T14:42:33.528Z,1516718553.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:33.555Z,1516718553.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:33.880Z,1516718553.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:33.911Z,1516718553.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:34.256Z,1516718554.256 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0268.lzma.bak 2018-01-23T14:42:34.256Z,1516718554.256 [DataOverHttps](INFO): SBD MOMSN=7755727 2018-01-23T14:42:34.305Z,1516718554.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:34.320Z,1516718554.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:35.640Z,1516718555.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:35.662Z,1516718555.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:35.663Z,1516718555.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 228 2018-01-23T14:42:35.663Z,1516718555.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:42:35.664Z,1516718555.664 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:35.665Z,1516718555.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 228 2018-01-23T14:42:35.665Z,1516718555.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:42:35.677Z,1516718555.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:42:35.678Z,1516718555.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:42:35.774Z,1516718555.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:35.840Z,1516718555.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:42:35.840Z,1516718555.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 228 2018-01-23T14:42:35.840Z,1516718555.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:42:35.840Z,1516718555.840 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 228 2018-01-23T14:42:38.930Z,1516718558.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:38.945Z,1516718558.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:42:38.945Z,1516718558.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:42:38.946Z,1516718558.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:42:38.946Z,1516718558.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:42:38.947Z,1516718558.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:42:38.948Z,1516718558.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:42:39.058Z,1516718559.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:39.091Z,1516718559.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s. 2018-01-23T14:42:39.092Z,1516718559.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:39.454Z,1516718559.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:39.476Z,1516718559.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s. 2018-01-23T14:42:39.477Z,1516718559.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:39.855Z,1516718559.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:39.869Z,1516718559.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s. 2018-01-23T14:42:39.870Z,1516718559.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:40.244Z,1516718560.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:40.283Z,1516718560.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s. 2018-01-23T14:42:40.284Z,1516718560.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:40.637Z,1516718560.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:40.652Z,1516718560.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s. 2018-01-23T14:42:40.653Z,1516718560.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:43.731Z,1516718563.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:43.745Z,1516718563.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T14:42:43.746Z,1516718563.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:43.829Z,1516718563.829 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0269.lzma 2018-01-23T14:42:43.849Z,1516718563.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:43.896Z,1516718563.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s. 2018-01-23T14:42:43.897Z,1516718563.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:44.200Z,1516718564.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:44.215Z,1516718564.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s. 2018-01-23T14:42:44.216Z,1516718564.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:44.570Z,1516718564.570 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0269.lzma.bak 2018-01-23T14:42:44.570Z,1516718564.570 [DataOverHttps](INFO): SBD MOMSN=7755729 2018-01-23T14:42:44.662Z,1516718564.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:44.698Z,1516718564.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s. 2018-01-23T14:42:44.699Z,1516718564.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:45.256Z,1516718565.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:45.270Z,1516718565.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:42:45.271Z,1516718565.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:45.274Z,1516718565.274 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:42:45.274Z,1516718565.274 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:42:45.274Z,1516718565.274 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:42:45.398Z,1516718565.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:45.437Z,1516718565.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T14:42:45.438Z,1516718565.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:48.496Z,1516718568.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:48.511Z,1516718568.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:42:48.512Z,1516718568.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:48.609Z,1516718568.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:48.652Z,1516718568.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s. 2018-01-23T14:42:48.653Z,1516718568.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:48.971Z,1516718568.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:48.996Z,1516718568.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T14:42:48.997Z,1516718568.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:49.387Z,1516718569.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:49.408Z,1516718569.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T14:42:49.409Z,1516718569.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:49.772Z,1516718569.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:49.796Z,1516718569.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T14:42:49.797Z,1516718569.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:50.165Z,1516718570.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:50.196Z,1516718570.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T14:42:50.197Z,1516718570.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:50.561Z,1516718570.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:50.576Z,1516718570.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T14:42:50.577Z,1516718570.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:50.962Z,1516718570.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:50.977Z,1516718570.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T14:42:50.978Z,1516718570.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:51.367Z,1516718571.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:51.382Z,1516718571.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T14:42:51.383Z,1516718571.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:51.767Z,1516718571.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:51.788Z,1516718571.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T14:42:51.789Z,1516718571.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:52.164Z,1516718572.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:52.184Z,1516718572.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T14:42:52.185Z,1516718572.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:52.561Z,1516718572.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:52.576Z,1516718572.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T14:42:52.577Z,1516718572.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:52.963Z,1516718572.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:52.977Z,1516718572.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T14:42:52.978Z,1516718572.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:53.356Z,1516718573.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:53.377Z,1516718573.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T14:42:53.377Z,1516718573.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:53.757Z,1516718573.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:53.780Z,1516718573.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T14:42:53.781Z,1516718573.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:54.162Z,1516718574.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:54.176Z,1516718574.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T14:42:54.177Z,1516718574.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:54.564Z,1516718574.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:54.592Z,1516718574.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T14:42:54.593Z,1516718574.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:54.971Z,1516718574.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:54.986Z,1516718574.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T14:42:54.987Z,1516718574.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:55.371Z,1516718575.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:55.385Z,1516718575.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T14:42:55.386Z,1516718575.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:55.756Z,1516718575.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:55.783Z,1516718575.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:56.165Z,1516718576.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:56.180Z,1516718576.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:56.562Z,1516718576.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:56.577Z,1516718576.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:56.961Z,1516718576.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:56.976Z,1516718576.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:57.374Z,1516718577.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:57.389Z,1516718577.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:57.775Z,1516718577.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:57.789Z,1516718577.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:58.163Z,1516718578.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:58.190Z,1516718578.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:58.558Z,1516718578.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:58.577Z,1516718578.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:58.958Z,1516718578.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:58.972Z,1516718578.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:59.354Z,1516718579.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:59.373Z,1516718579.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:42:59.759Z,1516718579.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:42:59.774Z,1516718579.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:00.161Z,1516718580.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:00.176Z,1516718580.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:00.564Z,1516718580.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:00.581Z,1516718580.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:00.975Z,1516718580.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:01.006Z,1516718581.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:01.375Z,1516718581.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:01.390Z,1516718581.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:01.764Z,1516718581.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:01.779Z,1516718581.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:02.159Z,1516718582.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:02.182Z,1516718582.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:02.563Z,1516718582.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:02.578Z,1516718582.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:02.957Z,1516718582.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:02.985Z,1516718582.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:03.371Z,1516718583.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:03.386Z,1516718583.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:03.772Z,1516718583.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:03.786Z,1516718583.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:04.166Z,1516718584.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:04.193Z,1516718584.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:04.554Z,1516718584.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:04.581Z,1516718584.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:04.953Z,1516718584.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:04.990Z,1516718584.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:05.351Z,1516718585.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:05.389Z,1516718585.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:05.767Z,1516718585.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:05.782Z,1516718585.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:06.153Z,1516718586.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:06.190Z,1516718586.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:06.568Z,1516718586.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:06.595Z,1516718586.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:06.977Z,1516718586.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:06.992Z,1516718586.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:07.381Z,1516718587.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:07.395Z,1516718587.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:07.757Z,1516718587.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:07.791Z,1516718587.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:08.170Z,1516718588.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:08.185Z,1516718588.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:08.554Z,1516718588.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:08.592Z,1516718588.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:08.957Z,1516718588.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:08.985Z,1516718588.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:09.379Z,1516718589.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:09.401Z,1516718589.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:09.781Z,1516718589.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:09.796Z,1516718589.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:10.168Z,1516718590.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:10.190Z,1516718590.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:10.553Z,1516718590.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:10.588Z,1516718590.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:10.954Z,1516718590.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:10.984Z,1516718590.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:11.353Z,1516718591.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:11.393Z,1516718591.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:11.758Z,1516718591.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:11.793Z,1516718591.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:12.192Z,1516718592.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:12.207Z,1516718592.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:12.571Z,1516718592.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:12.595Z,1516718592.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:12.986Z,1516718592.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:13.009Z,1516718593.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:13.370Z,1516718593.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:13.397Z,1516718593.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:13.758Z,1516718593.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:13.773Z,1516718593.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:14.158Z,1516718594.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:14.185Z,1516718594.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:14.563Z,1516718594.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:14.578Z,1516718594.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:14.962Z,1516718594.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:14.977Z,1516718594.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:15.367Z,1516718595.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:15.382Z,1516718595.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:15.768Z,1516718595.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:15.788Z,1516718595.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:16.164Z,1516718596.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:16.191Z,1516718596.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:16.561Z,1516718596.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:16.580Z,1516718596.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:16.960Z,1516718596.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:16.988Z,1516718596.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:17.362Z,1516718597.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:17.385Z,1516718597.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:17.770Z,1516718597.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:17.789Z,1516718597.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:18.183Z,1516718598.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:18.239Z,1516718598.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:18.572Z,1516718598.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:18.587Z,1516718598.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:18.968Z,1516718598.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:18.991Z,1516718598.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:19.374Z,1516718599.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:19.392Z,1516718599.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:19.767Z,1516718599.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:19.782Z,1516718599.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:20.166Z,1516718600.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:20.181Z,1516718600.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:20.563Z,1516718600.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:20.578Z,1516718600.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:20.957Z,1516718600.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:20.986Z,1516718600.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:21.372Z,1516718601.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:21.393Z,1516718601.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:21.776Z,1516718601.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:21.791Z,1516718601.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:22.172Z,1516718602.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:22.188Z,1516718602.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:22.553Z,1516718602.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:22.589Z,1516718602.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:22.953Z,1516718602.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:22.981Z,1516718602.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:23.351Z,1516718603.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:23.386Z,1516718603.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:23.754Z,1516718603.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:23.789Z,1516718603.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:24.152Z,1516718604.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:24.185Z,1516718604.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:24.573Z,1516718604.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:24.644Z,1516718604.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:24.978Z,1516718604.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:24.993Z,1516718604.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:25.371Z,1516718605.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:25.387Z,1516718605.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:25.753Z,1516718605.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:25.789Z,1516718605.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:26.157Z,1516718606.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:26.183Z,1516718606.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:26.554Z,1516718606.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:26.590Z,1516718606.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:26.953Z,1516718606.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:26.984Z,1516718606.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:27.376Z,1516718607.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:27.391Z,1516718607.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:27.777Z,1516718607.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:27.792Z,1516718607.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:28.164Z,1516718608.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:28.191Z,1516718608.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:28.553Z,1516718608.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:28.580Z,1516718608.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:28.953Z,1516718608.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:28.997Z,1516718608.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:29.351Z,1516718609.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:29.366Z,1516718609.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:29.754Z,1516718609.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:29.773Z,1516718609.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:30.161Z,1516718610.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:30.176Z,1516718610.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:30.567Z,1516718610.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:30.582Z,1516718610.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:30.971Z,1516718610.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:30.986Z,1516718610.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:31.375Z,1516718611.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:31.390Z,1516718611.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:31.757Z,1516718611.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:31.779Z,1516718611.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:32.161Z,1516718612.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:32.176Z,1516718612.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:32.557Z,1516718612.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:32.591Z,1516718612.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:32.961Z,1516718612.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:32.976Z,1516718612.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:33.367Z,1516718613.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:33.382Z,1516718613.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:33.768Z,1516718613.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:33.783Z,1516718613.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:34.164Z,1516718614.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:34.193Z,1516718614.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:34.565Z,1516718614.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:34.580Z,1516718614.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:34.962Z,1516718614.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:34.978Z,1516718614.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:35.356Z,1516718615.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:35.389Z,1516718615.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:35.766Z,1516718615.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:35.785Z,1516718615.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:36.157Z,1516718616.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:36.191Z,1516718616.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:36.568Z,1516718616.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:36.599Z,1516718616.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:36.978Z,1516718616.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:37.001Z,1516718617.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:37.380Z,1516718617.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:37.401Z,1516718617.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:37.753Z,1516718617.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:37.789Z,1516718617.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:38.157Z,1516718618.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:38.184Z,1516718618.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:38.554Z,1516718618.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:38.593Z,1516718618.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:38.957Z,1516718618.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:38.988Z,1516718618.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:39.364Z,1516718619.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:39.390Z,1516718619.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:39.767Z,1516718619.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:39.803Z,1516718619.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:40.164Z,1516718620.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:40.190Z,1516718620.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:40.553Z,1516718620.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:40.568Z,1516718620.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:40.954Z,1516718620.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:40.969Z,1516718620.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:41.359Z,1516718621.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:41.374Z,1516718621.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:41.762Z,1516718621.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:41.777Z,1516718621.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:42.158Z,1516718622.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:42.178Z,1516718622.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:42.564Z,1516718622.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:42.579Z,1516718622.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:42.967Z,1516718622.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:42.982Z,1516718622.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:43.364Z,1516718623.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:43.379Z,1516718623.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:43.760Z,1516718623.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:43.784Z,1516718623.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:44.171Z,1516718624.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:44.186Z,1516718624.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:44.558Z,1516718624.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:44.592Z,1516718624.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:44.963Z,1516718624.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:44.978Z,1516718624.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:45.366Z,1516718625.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:45.381Z,1516718625.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:45.776Z,1516718625.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:45.799Z,1516718625.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:48.865Z,1516718628.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:48.880Z,1516718628.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:48.980Z,1516718628.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:49.018Z,1516718629.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:49.332Z,1516718629.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:49.347Z,1516718629.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:49.740Z,1516718629.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:49.756Z,1516718629.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:50.132Z,1516718630.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:50.148Z,1516718630.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:50.538Z,1516718630.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:50.554Z,1516718630.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:50.939Z,1516718630.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:50.954Z,1516718630.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:51.338Z,1516718631.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:51.361Z,1516718631.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:51.732Z,1516718631.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:51.751Z,1516718631.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:52.134Z,1516718632.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:52.149Z,1516718632.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:52.529Z,1516718632.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:52.553Z,1516718632.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:52.937Z,1516718632.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:52.952Z,1516718632.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:53.343Z,1516718633.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:53.364Z,1516718633.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:53.743Z,1516718633.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:53.765Z,1516718633.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:54.142Z,1516718634.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:54.165Z,1516718634.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:54.535Z,1516718634.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:54.550Z,1516718634.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:54.932Z,1516718634.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:54.952Z,1516718634.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:55.342Z,1516718635.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:55.379Z,1516718635.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:55.748Z,1516718635.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:55.763Z,1516718635.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:56.141Z,1516718636.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:56.163Z,1516718636.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:56.529Z,1516718636.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:56.565Z,1516718636.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:56.924Z,1516718636.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:56.962Z,1516718636.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:57.341Z,1516718637.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:57.369Z,1516718637.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:57.753Z,1516718637.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:57.767Z,1516718637.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:58.138Z,1516718638.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:58.173Z,1516718638.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:58.529Z,1516718638.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:58.557Z,1516718638.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:58.923Z,1516718638.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:58.961Z,1516718638.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:59.349Z,1516718639.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:59.364Z,1516718639.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:43:59.745Z,1516718639.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:43:59.777Z,1516718639.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:00.148Z,1516718640.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:00.163Z,1516718640.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:00.525Z,1516718640.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:00.563Z,1516718640.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:00.928Z,1516718640.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:00.961Z,1516718640.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:01.335Z,1516718641.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:01.369Z,1516718641.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:01.751Z,1516718641.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:01.776Z,1516718641.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:02.135Z,1516718642.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:02.169Z,1516718642.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:02.525Z,1516718642.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:02.556Z,1516718642.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:02.924Z,1516718642.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:02.939Z,1516718642.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:03.335Z,1516718643.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:03.363Z,1516718643.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:03.760Z,1516718643.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:03.775Z,1516718643.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:04.148Z,1516718644.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:04.180Z,1516718644.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:04.533Z,1516718644.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:04.549Z,1516718644.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:04.929Z,1516718644.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:04.949Z,1516718644.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:05.348Z,1516718645.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:05.380Z,1516718645.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:05.748Z,1516718645.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:05.778Z,1516718645.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:06.139Z,1516718646.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:06.155Z,1516718646.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:06.532Z,1516718646.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:06.571Z,1516718646.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:06.936Z,1516718646.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:06.952Z,1516718646.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:07.338Z,1516718647.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:07.354Z,1516718647.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:07.739Z,1516718647.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:07.755Z,1516718647.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:08.137Z,1516718648.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:08.153Z,1516718648.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:08.532Z,1516718648.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:08.551Z,1516718648.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:08.933Z,1516718648.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:08.949Z,1516718648.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:09.337Z,1516718649.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:09.353Z,1516718649.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:09.739Z,1516718649.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:09.755Z,1516718649.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:10.138Z,1516718650.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:10.154Z,1516718650.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:10.532Z,1516718650.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:10.551Z,1516718650.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:10.932Z,1516718650.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:10.948Z,1516718650.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:11.339Z,1516718651.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:11.355Z,1516718651.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:11.739Z,1516718651.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:11.755Z,1516718651.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:12.138Z,1516718652.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:12.153Z,1516718652.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:12.529Z,1516718652.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:12.553Z,1516718652.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:12.932Z,1516718652.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:12.953Z,1516718652.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:13.337Z,1516718653.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:13.354Z,1516718653.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:13.739Z,1516718653.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:13.755Z,1516718653.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:14.138Z,1516718654.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:14.153Z,1516718654.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:14.532Z,1516718654.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:14.551Z,1516718654.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:14.933Z,1516718654.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:14.949Z,1516718654.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:15.339Z,1516718655.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:15.355Z,1516718655.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:15.739Z,1516718655.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:15.755Z,1516718655.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:16.139Z,1516718656.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:16.154Z,1516718656.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:16.529Z,1516718656.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:16.557Z,1516718656.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:16.936Z,1516718656.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:16.953Z,1516718656.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:17.340Z,1516718657.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:17.369Z,1516718657.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:17.746Z,1516718657.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:17.761Z,1516718657.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:18.143Z,1516718658.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:18.165Z,1516718658.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:18.539Z,1516718658.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:18.555Z,1516718658.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:18.927Z,1516718658.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:18.960Z,1516718658.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:19.342Z,1516718659.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:19.371Z,1516718659.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:19.749Z,1516718659.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:19.769Z,1516718659.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:20.148Z,1516718660.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:20.163Z,1516718660.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:20.543Z,1516718660.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:20.558Z,1516718660.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:20.925Z,1516718660.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:20.957Z,1516718660.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:21.348Z,1516718661.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:21.363Z,1516718661.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:21.743Z,1516718661.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:21.780Z,1516718661.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:22.151Z,1516718662.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:22.166Z,1516718662.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:22.525Z,1516718662.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:22.550Z,1516718662.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:22.933Z,1516718662.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:22.968Z,1516718662.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:23.336Z,1516718663.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:23.371Z,1516718663.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:23.740Z,1516718663.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:23.775Z,1516718663.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:24.136Z,1516718664.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:24.175Z,1516718664.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:24.525Z,1516718664.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:24.544Z,1516718664.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:24.934Z,1516718664.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:24.969Z,1516718664.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:25.329Z,1516718665.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:25.349Z,1516718665.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:25.740Z,1516718665.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:25.755Z,1516718665.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:26.140Z,1516718666.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:26.156Z,1516718666.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:26.537Z,1516718666.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:26.560Z,1516718666.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:26.937Z,1516718666.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:26.953Z,1516718666.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:27.333Z,1516718667.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:27.348Z,1516718667.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:27.732Z,1516718667.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:27.751Z,1516718667.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:28.133Z,1516718668.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:28.148Z,1516718668.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:28.538Z,1516718668.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:28.554Z,1516718668.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:28.939Z,1516718668.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:28.955Z,1516718668.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:29.338Z,1516718669.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:29.360Z,1516718669.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:29.732Z,1516718669.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:29.748Z,1516718669.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:30.133Z,1516718670.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:30.149Z,1516718670.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:30.533Z,1516718670.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:30.548Z,1516718670.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:30.932Z,1516718670.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:30.952Z,1516718670.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:31.332Z,1516718671.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:31.348Z,1516718671.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:31.741Z,1516718671.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:31.763Z,1516718671.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:31.775Z,1516718671.775 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:44:32.152Z,1516718672.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:32.166Z,1516718672.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:32.544Z,1516718672.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:44:32.565Z,1516718672.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:32.953Z,1516718672.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:33.349Z,1516718673.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:33.757Z,1516718673.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:34.164Z,1516718674.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:34.563Z,1516718674.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:34.963Z,1516718674.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:35.360Z,1516718675.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:35.755Z,1516718675.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:36.158Z,1516718676.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:36.560Z,1516718676.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:36.961Z,1516718676.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:37.361Z,1516718677.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:37.762Z,1516718677.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:38.169Z,1516718678.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:38.563Z,1516718678.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:38.951Z,1516718678.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:39.353Z,1516718679.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:39.756Z,1516718679.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:40.159Z,1516718680.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:40.562Z,1516718680.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:40.962Z,1516718680.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:41.358Z,1516718681.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:41.753Z,1516718681.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:42.153Z,1516718682.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:42.563Z,1516718682.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:42.954Z,1516718682.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:43.353Z,1516718683.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:43.762Z,1516718683.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:44.177Z,1516718684.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:44.562Z,1516718684.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:44.952Z,1516718684.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:45.353Z,1516718685.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:45.757Z,1516718685.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:46.156Z,1516718686.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:49.270Z,1516718689.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:49.433Z,1516718689.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:49.757Z,1516718689.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:50.157Z,1516718690.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:50.532Z,1516718690.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:50.936Z,1516718690.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:51.361Z,1516718691.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:51.742Z,1516718691.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:52.166Z,1516718692.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:52.567Z,1516718692.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:52.935Z,1516718692.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:53.340Z,1516718693.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:53.739Z,1516718693.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:54.134Z,1516718694.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:54.545Z,1516718694.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:54.971Z,1516718694.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:55.349Z,1516718695.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:55.738Z,1516718695.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:56.138Z,1516718696.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:56.537Z,1516718696.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:56.949Z,1516718696.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:57.341Z,1516718697.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:57.745Z,1516718697.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:58.153Z,1516718698.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:58.553Z,1516718698.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:58.945Z,1516718698.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:59.337Z,1516718699.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:44:59.745Z,1516718699.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:00.138Z,1516718700.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:00.550Z,1516718700.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:00.951Z,1516718700.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:01.351Z,1516718701.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:01.750Z,1516718701.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:02.138Z,1516718702.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:02.544Z,1516718702.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:02.946Z,1516718702.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:03.346Z,1516718703.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:03.748Z,1516718703.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:04.150Z,1516718704.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:04.561Z,1516718704.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:04.945Z,1516718704.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:05.344Z,1516718705.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:05.748Z,1516718705.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:06.149Z,1516718706.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:06.553Z,1516718706.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:06.951Z,1516718706.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:07.347Z,1516718707.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:07.752Z,1516718707.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:08.144Z,1516718708.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:08.541Z,1516718708.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:08.943Z,1516718708.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:09.340Z,1516718709.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:09.754Z,1516718709.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:10.153Z,1516718710.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:10.562Z,1516718710.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:10.941Z,1516718710.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:11.353Z,1516718711.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:11.744Z,1516718711.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:12.142Z,1516718712.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:12.550Z,1516718712.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:12.952Z,1516718712.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:13.356Z,1516718713.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:13.745Z,1516718713.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:14.150Z,1516718714.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:14.549Z,1516718714.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:14.952Z,1516718714.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:15.350Z,1516718715.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:15.760Z,1516718715.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:16.152Z,1516718716.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:16.552Z,1516718716.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:16.949Z,1516718716.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:17.342Z,1516718717.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:17.755Z,1516718717.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:18.152Z,1516718718.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:18.565Z,1516718718.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:18.955Z,1516718718.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:19.353Z,1516718719.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:19.729Z,1516718719.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:20.161Z,1516718720.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:20.534Z,1516718720.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:20.938Z,1516718720.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:21.335Z,1516718721.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:21.759Z,1516718721.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:22.159Z,1516718722.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:22.559Z,1516718722.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:22.941Z,1516718722.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:23.345Z,1516718723.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:23.738Z,1516718723.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:24.145Z,1516718724.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:24.542Z,1516718724.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:24.971Z,1516718724.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:25.345Z,1516718725.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:25.741Z,1516718725.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:26.139Z,1516718726.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:26.541Z,1516718726.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:26.963Z,1516718726.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:27.328Z,1516718727.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x22775 got:0x51392 2018-01-23T14:45:27.345Z,1516718727.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:27.348Z,1516718727.348 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:27.348Z,1516718727.348 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 229 2018-01-23T14:45:27.348Z,1516718727.348 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:45:27.368Z,1516718727.368 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:45:27.751Z,1516718727.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:27.780Z,1516718727.780 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:45:27.780Z,1516718727.780 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 229 2018-01-23T14:45:28.153Z,1516718728.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:28.155Z,1516718728.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:45:28.155Z,1516718728.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:45:28.156Z,1516718728.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:45:28.549Z,1516718728.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:28.940Z,1516718728.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:29.339Z,1516718729.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:29.738Z,1516718729.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:30.153Z,1516718730.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:30.553Z,1516718730.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:30.952Z,1516718730.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:31.353Z,1516718731.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:31.753Z,1516718731.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:32.149Z,1516718732.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:32.542Z,1516718732.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:32.948Z,1516718732.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:33.350Z,1516718733.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:33.749Z,1516718733.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:34.154Z,1516718734.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:34.548Z,1516718734.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:34.953Z,1516718734.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:35.345Z,1516718735.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:35.749Z,1516718735.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:36.135Z,1516718736.135 [PNI_TCM](ERROR): CRC does not match. Expected:0x51671 got:0x49796 2018-01-23T14:45:36.164Z,1516718736.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:36.565Z,1516718736.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:36.948Z,1516718736.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T14:45:36.965Z,1516718736.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:37.362Z,1516718737.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:37.753Z,1516718737.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:38.155Z,1516718738.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:38.536Z,1516718738.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:38.948Z,1516718738.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:38.949Z,1516718738.949 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:38.949Z,1516718738.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 229 2018-01-23T14:45:38.949Z,1516718738.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:45:38.974Z,1516718738.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:45:39.330Z,1516718739.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:39.330Z,1516718739.330 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 229 2018-01-23T14:45:39.330Z,1516718739.330 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:45:39.367Z,1516718739.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:45:39.367Z,1516718739.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:45:39.367Z,1516718739.367 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 229 2018-01-23T14:45:39.759Z,1516718739.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:45:39.760Z,1516718739.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:45:39.760Z,1516718739.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:45:39.772Z,1516718739.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:45:39.772Z,1516718739.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 229 2018-01-23T14:45:40.164Z,1516718740.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:45:40.164Z,1516718740.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:45:40.164Z,1516718740.164 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:45:40.560Z,1516718740.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:45:40.561Z,1516718740.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:40.938Z,1516718740.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:45:40.956Z,1516718740.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:41.368Z,1516718741.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:45:41.369Z,1516718741.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:41.788Z,1516718741.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T14:45:41.789Z,1516718741.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:42.158Z,1516718742.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:45:42.159Z,1516718742.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:42.562Z,1516718742.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:45:42.563Z,1516718742.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:42.970Z,1516718742.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:45:42.971Z,1516718742.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:43.363Z,1516718743.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:45:43.364Z,1516718743.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:43.764Z,1516718743.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:45:43.764Z,1516718743.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:44.139Z,1516718744.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:45:44.140Z,1516718744.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:44.549Z,1516718744.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:45:44.567Z,1516718744.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:44.948Z,1516718744.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:45:44.950Z,1516718744.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:45.337Z,1516718745.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:45:45.338Z,1516718745.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:45.746Z,1516718745.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:45:45.748Z,1516718745.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:46.171Z,1516718746.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:45:46.172Z,1516718746.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:46.556Z,1516718746.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:45:46.557Z,1516718746.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:49.653Z,1516718749.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T14:45:49.653Z,1516718749.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:49.788Z,1516718749.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T14:45:49.789Z,1516718749.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:50.160Z,1516718750.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:45:50.161Z,1516718750.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:50.549Z,1516718750.549 [PNI_TCM](ERROR): CRC does not match. Expected:0x56507 got:0x33930 2018-01-23T14:45:50.588Z,1516718750.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T14:45:50.589Z,1516718750.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:50.979Z,1516718750.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:45:50.980Z,1516718750.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:51.349Z,1516718751.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:45:51.350Z,1516718751.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:51.754Z,1516718751.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:45:51.755Z,1516718751.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:52.153Z,1516718752.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:45:52.154Z,1516718752.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:52.580Z,1516718752.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T14:45:52.581Z,1516718752.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:52.979Z,1516718752.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:45:52.980Z,1516718752.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:53.359Z,1516718753.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:45:53.360Z,1516718753.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:53.751Z,1516718753.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:45:53.752Z,1516718753.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:54.146Z,1516718754.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:45:54.147Z,1516718754.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:54.548Z,1516718754.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:45:54.549Z,1516718754.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:54.950Z,1516718754.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:45:54.951Z,1516718754.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:55.352Z,1516718755.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:45:55.353Z,1516718755.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:55.753Z,1516718755.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:45:55.754Z,1516718755.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:56.153Z,1516718756.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:45:56.154Z,1516718756.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:56.557Z,1516718756.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:45:56.558Z,1516718756.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:56.951Z,1516718756.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:45:56.952Z,1516718756.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:57.353Z,1516718757.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:45:57.354Z,1516718757.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:57.749Z,1516718757.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:45:57.750Z,1516718757.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:58.146Z,1516718758.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:45:58.148Z,1516718758.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:58.556Z,1516718758.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:45:58.557Z,1516718758.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:58.958Z,1516718758.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:45:58.959Z,1516718758.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:59.358Z,1516718759.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:45:59.753Z,1516718759.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:00.146Z,1516718760.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:00.558Z,1516718760.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:00.960Z,1516718760.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:01.360Z,1516718761.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:01.754Z,1516718761.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:02.146Z,1516718762.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:02.558Z,1516718762.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:02.957Z,1516718762.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:03.361Z,1516718763.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:03.753Z,1516718763.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:04.150Z,1516718764.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:04.562Z,1516718764.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:04.965Z,1516718764.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:05.365Z,1516718765.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:05.748Z,1516718765.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:06.161Z,1516718766.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:06.566Z,1516718766.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:06.968Z,1516718766.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:07.360Z,1516718767.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:07.750Z,1516718767.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:08.161Z,1516718768.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:08.561Z,1516718768.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:08.962Z,1516718768.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:09.357Z,1516718769.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:09.762Z,1516718769.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:10.153Z,1516718770.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:10.557Z,1516718770.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:10.963Z,1516718770.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:11.363Z,1516718771.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:11.750Z,1516718771.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:12.161Z,1516718772.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:12.563Z,1516718772.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:12.962Z,1516718772.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:13.362Z,1516718773.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:13.756Z,1516718773.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:14.161Z,1516718774.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:14.562Z,1516718774.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:14.988Z,1516718774.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:15.438Z,1516718775.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:15.785Z,1516718775.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:16.154Z,1516718776.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:16.596Z,1516718776.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:16.968Z,1516718776.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:17.365Z,1516718777.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:17.804Z,1516718777.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:18.174Z,1516718778.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:18.604Z,1516718778.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:18.962Z,1516718778.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:19.357Z,1516718779.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:19.741Z,1516718779.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:20.141Z,1516718780.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:20.564Z,1516718780.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:20.978Z,1516718780.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:21.402Z,1516718781.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:21.765Z,1516718781.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:22.160Z,1516718782.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:22.620Z,1516718782.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:22.980Z,1516718782.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:23.384Z,1516718783.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:23.788Z,1516718783.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:24.182Z,1516718784.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:24.593Z,1516718784.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:24.993Z,1516718784.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:25.361Z,1516718785.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:25.762Z,1516718785.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:26.173Z,1516718786.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:26.566Z,1516718786.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:26.981Z,1516718786.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:27.376Z,1516718787.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:27.781Z,1516718787.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:28.181Z,1516718788.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:28.608Z,1516718788.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:28.981Z,1516718788.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:29.382Z,1516718789.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:29.757Z,1516718789.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:30.164Z,1516718790.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:30.562Z,1516718790.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:30.990Z,1516718790.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:31.365Z,1516718791.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:31.802Z,1516718791.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:32.173Z,1516718792.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:32.575Z,1516718792.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:32.985Z,1516718792.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:33.374Z,1516718793.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:33.749Z,1516718793.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:34.147Z,1516718794.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:34.553Z,1516718794.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:34.958Z,1516718794.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:35.350Z,1516718795.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:35.745Z,1516718795.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:36.146Z,1516718796.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:36.553Z,1516718796.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:36.954Z,1516718796.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:37.355Z,1516718797.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:37.753Z,1516718797.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:38.177Z,1516718798.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:38.537Z,1516718798.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:38.941Z,1516718798.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:39.340Z,1516718799.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:39.754Z,1516718799.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:40.162Z,1516718800.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:40.561Z,1516718800.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:40.998Z,1516718800.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:41.341Z,1516718801.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:41.741Z,1516718801.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:42.137Z,1516718802.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:42.541Z,1516718802.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:42.961Z,1516718802.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:43.362Z,1516718803.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:43.773Z,1516718803.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:44.173Z,1516718804.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:44.697Z,1516718804.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:44.976Z,1516718804.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:45.374Z,1516718805.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:45.770Z,1516718805.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:46.173Z,1516718806.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:46.577Z,1516718806.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:49.640Z,1516718809.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:49.777Z,1516718809.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:50.141Z,1516718810.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:50.542Z,1516718810.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:50.945Z,1516718810.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:51.341Z,1516718811.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:51.734Z,1516718811.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:52.133Z,1516718812.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:52.542Z,1516718812.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:52.946Z,1516718812.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:53.345Z,1516718813.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:53.753Z,1516718813.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:54.137Z,1516718814.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:54.541Z,1516718814.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:54.937Z,1516718814.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:55.336Z,1516718815.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:55.753Z,1516718815.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:56.146Z,1516718816.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:56.544Z,1516718816.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:56.945Z,1516718816.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:57.345Z,1516718817.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:57.744Z,1516718817.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:58.150Z,1516718818.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:58.537Z,1516718818.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:58.946Z,1516718818.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:59.361Z,1516718819.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:46:59.756Z,1516718819.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:00.127Z,1516718820.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:00.557Z,1516718820.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:00.928Z,1516718820.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:01.331Z,1516718821.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:01.753Z,1516718821.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:02.150Z,1516718822.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:02.538Z,1516718822.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:02.933Z,1516718822.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:03.331Z,1516718823.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:03.732Z,1516718823.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:04.140Z,1516718824.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:04.535Z,1516718824.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:04.943Z,1516718824.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:05.345Z,1516718825.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:05.749Z,1516718825.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:06.136Z,1516718826.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:06.534Z,1516718826.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:06.936Z,1516718826.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:07.334Z,1516718827.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:07.743Z,1516718827.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:08.132Z,1516718828.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:47:08.147Z,1516718828.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:08.529Z,1516718828.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:47:08.544Z,1516718828.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:08.908Z,1516718828.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:47:08.935Z,1516718828.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:09.344Z,1516718829.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:09.739Z,1516718829.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:10.134Z,1516718830.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:10.544Z,1516718830.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:10.948Z,1516718830.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:11.346Z,1516718831.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:11.760Z,1516718831.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:12.140Z,1516718832.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:12.539Z,1516718832.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:12.933Z,1516718832.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:13.338Z,1516718833.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:13.743Z,1516718833.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:14.145Z,1516718834.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:14.542Z,1516718834.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:14.939Z,1516718834.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:15.341Z,1516718835.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:15.740Z,1516718835.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:16.140Z,1516718836.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:16.541Z,1516718836.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:16.946Z,1516718836.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:17.358Z,1516718837.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:17.741Z,1516718837.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:18.137Z,1516718838.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:18.553Z,1516718838.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:18.931Z,1516718838.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:19.329Z,1516718839.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:19.758Z,1516718839.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:20.164Z,1516718840.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:20.542Z,1516718840.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:20.932Z,1516718840.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:21.329Z,1516718841.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:21.745Z,1516718841.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:22.133Z,1516718842.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:22.530Z,1516718842.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:22.945Z,1516718842.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:23.342Z,1516718843.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:23.736Z,1516718843.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:24.136Z,1516718844.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:24.537Z,1516718844.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:24.931Z,1516718844.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:25.340Z,1516718845.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:25.745Z,1516718845.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:26.141Z,1516718846.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:26.549Z,1516718846.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:26.941Z,1516718846.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:27.331Z,1516718847.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:27.733Z,1516718847.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:28.134Z,1516718848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:28.531Z,1516718848.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:28.946Z,1516718848.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:29.349Z,1516718849.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:29.744Z,1516718849.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:30.141Z,1516718850.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:30.534Z,1516718850.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:30.937Z,1516718850.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:31.334Z,1516718851.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:31.741Z,1516718851.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:32.146Z,1516718852.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:32.542Z,1516718852.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:32.937Z,1516718852.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:33.332Z,1516718853.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:33.749Z,1516718853.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:34.137Z,1516718854.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:34.533Z,1516718854.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:34.947Z,1516718854.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:35.346Z,1516718855.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:35.746Z,1516718855.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:36.134Z,1516718856.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:36.535Z,1516718856.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:36.940Z,1516718856.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:37.342Z,1516718857.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:37.743Z,1516718857.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:38.145Z,1516718858.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:38.550Z,1516718858.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:38.941Z,1516718858.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:39.344Z,1516718859.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:39.741Z,1516718859.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:40.140Z,1516718860.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:40.533Z,1516718860.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:40.942Z,1516718860.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:41.345Z,1516718861.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:41.750Z,1516718861.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:42.139Z,1516718862.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:42.545Z,1516718862.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:42.939Z,1516718862.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:43.332Z,1516718863.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:43.751Z,1516718863.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:44.154Z,1516718864.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:44.544Z,1516718864.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:44.953Z,1516718864.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:45.354Z,1516718865.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:45.744Z,1516718865.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:45.751Z,1516718865.751 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:47:45.751Z,1516718865.751 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:47:45.751Z,1516718865.751 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:47:45.751Z,1516718865.751 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:47:46.150Z,1516718866.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:46.154Z,1516718866.154 [Default:CheckIn:D] Stopped 2018-01-23T14:47:46.154Z,1516718866.154 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:47:46.549Z,1516718866.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 689.901562 min 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn:E] Stopped 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn] Stopped 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:47:46.553Z,1516718866.553 [Default:CheckIn](INFO): Running loop #68 2018-01-23T14:47:46.554Z,1516718866.554 [Default:CheckIn] Running Loop=68 2018-01-23T14:47:46.554Z,1516718866.554 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:47:46.554Z,1516718866.554 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:47:46.956Z,1516718866.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:50.061Z,1516718870.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:50.209Z,1516718870.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:50.529Z,1516718870.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:50.933Z,1516718870.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:51.324Z,1516718871.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:51.730Z,1516718871.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:52.133Z,1516718872.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:52.530Z,1516718872.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:52.928Z,1516718872.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:53.326Z,1516718873.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:53.730Z,1516718873.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:54.134Z,1516718874.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:54.541Z,1516718874.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:54.928Z,1516718874.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:55.328Z,1516718875.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:55.729Z,1516718875.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:56.128Z,1516718876.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:56.527Z,1516718876.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:56.940Z,1516718876.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:57.337Z,1516718877.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:57.734Z,1516718877.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:58.132Z,1516718878.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:58.527Z,1516718878.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:58.936Z,1516718878.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:59.332Z,1516718879.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:47:59.737Z,1516718879.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:00.138Z,1516718880.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:00.520Z,1516718880.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:00.535Z,1516718880.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:00.915Z,1516718880.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:00.930Z,1516718880.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:01.312Z,1516718881.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:01.327Z,1516718881.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:01.718Z,1516718881.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:01.734Z,1516718881.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:02.119Z,1516718882.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:02.134Z,1516718882.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:02.518Z,1516718882.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:02.537Z,1516718882.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:02.914Z,1516718882.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:02.929Z,1516718882.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:03.308Z,1516718883.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:03.328Z,1516718883.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:03.717Z,1516718883.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:03.737Z,1516718883.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:04.123Z,1516718884.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:04.138Z,1516718884.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:04.518Z,1516718884.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:04.537Z,1516718884.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:04.916Z,1516718884.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:04.937Z,1516718884.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:05.317Z,1516718885.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:05.333Z,1516718885.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:05.718Z,1516718885.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:05.737Z,1516718885.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:06.119Z,1516718886.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:06.134Z,1516718886.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:06.533Z,1516718886.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:06.929Z,1516718886.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:07.327Z,1516718887.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:07.702Z,1516718887.702 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:48:07.702Z,1516718887.702 [NAL9602] Data Fault, FailCount= 3 2018-01-23T14:48:07.702Z,1516718887.702 [NAL9602](ERROR): Data Fault 2018-01-23T14:48:07.733Z,1516718887.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:07.746Z,1516718887.746 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:48:08.088Z,1516718888.088 [NAL9602](INFO): Powering down 2018-01-23T14:48:08.136Z,1516718888.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:08.526Z,1516718888.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:08.933Z,1516718888.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:08.946Z,1516718888.946 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:48:08.946Z,1516718888.946 [NAL9602] No Fault, FailCount= 3 2018-01-23T14:48:09.327Z,1516718889.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:09.737Z,1516718889.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:10.118Z,1516718890.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:10.133Z,1516718890.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:10.513Z,1516718890.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:10.528Z,1516718890.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:10.913Z,1516718890.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:10.929Z,1516718890.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:11.311Z,1516718891.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:11.333Z,1516718891.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:11.713Z,1516718891.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:11.728Z,1516718891.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:12.106Z,1516718892.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:12.143Z,1516718892.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:12.517Z,1516718892.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:12.533Z,1516718892.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:12.912Z,1516718892.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:12.929Z,1516718892.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:13.313Z,1516718893.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:13.328Z,1516718893.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:13.713Z,1516718893.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:13.728Z,1516718893.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:14.113Z,1516718894.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:14.128Z,1516718894.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:14.514Z,1516718894.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:14.528Z,1516718894.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:14.917Z,1516718894.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:14.933Z,1516718894.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:15.313Z,1516718895.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:15.328Z,1516718895.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:15.712Z,1516718895.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:15.738Z,1516718895.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:16.112Z,1516718896.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:16.128Z,1516718896.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:16.512Z,1516718896.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:16.527Z,1516718896.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:16.912Z,1516718896.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:16.927Z,1516718896.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:17.312Z,1516718897.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:17.327Z,1516718897.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:17.712Z,1516718897.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:17.728Z,1516718897.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:18.110Z,1516718898.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:18.140Z,1516718898.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:18.509Z,1516718898.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:18.524Z,1516718898.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:18.912Z,1516718898.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:18.927Z,1516718898.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:19.306Z,1516718899.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:19.337Z,1516718899.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:19.712Z,1516718899.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:19.727Z,1516718899.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:20.113Z,1516718900.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:20.128Z,1516718900.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:20.513Z,1516718900.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:20.532Z,1516718900.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:20.912Z,1516718900.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:20.927Z,1516718900.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:21.312Z,1516718901.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:21.327Z,1516718901.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:21.712Z,1516718901.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:21.732Z,1516718901.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:22.101Z,1516718902.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:22.140Z,1516718902.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:22.513Z,1516718902.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:22.528Z,1516718902.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:22.913Z,1516718902.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:22.932Z,1516718902.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:23.302Z,1516718903.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:23.328Z,1516718903.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:23.713Z,1516718903.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:23.728Z,1516718903.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:24.114Z,1516718904.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:24.136Z,1516718904.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:24.501Z,1516718904.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:24.534Z,1516718904.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:24.913Z,1516718904.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:24.927Z,1516718904.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:25.312Z,1516718905.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:25.332Z,1516718905.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:25.716Z,1516718905.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:25.731Z,1516718905.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:26.104Z,1516718906.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:26.141Z,1516718906.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:26.504Z,1516718906.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:26.530Z,1516718906.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:26.904Z,1516718906.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:26.937Z,1516718906.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:27.316Z,1516718907.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:27.332Z,1516718907.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:27.704Z,1516718907.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:27.738Z,1516718907.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:28.101Z,1516718908.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:28.136Z,1516718908.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:28.504Z,1516718908.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:28.530Z,1516718908.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:28.532Z,1516718908.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:28.532Z,1516718908.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 230 2018-01-23T14:48:28.533Z,1516718908.533 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:48:28.544Z,1516718908.544 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:48:28.907Z,1516718908.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:28.941Z,1516718908.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:28.954Z,1516718908.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:48:28.954Z,1516718908.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 230 2018-01-23T14:48:29.301Z,1516718909.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:29.337Z,1516718909.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:29.338Z,1516718909.338 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:48:29.338Z,1516718909.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:48:29.339Z,1516718909.339 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:48:29.704Z,1516718909.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:29.737Z,1516718909.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:30.104Z,1516718910.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:30.129Z,1516718910.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:30.501Z,1516718910.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:30.537Z,1516718910.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:30.904Z,1516718910.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:30.930Z,1516718910.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:31.304Z,1516718911.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:31.338Z,1516718911.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:31.704Z,1516718911.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:31.739Z,1516718911.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:32.108Z,1516718912.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:32.134Z,1516718912.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:32.504Z,1516718912.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:32.538Z,1516718912.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:32.908Z,1516718912.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:32.935Z,1516718912.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:33.308Z,1516718913.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:33.334Z,1516718913.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:33.704Z,1516718913.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:33.729Z,1516718913.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:34.104Z,1516718914.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:34.130Z,1516718914.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:34.504Z,1516718914.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:34.531Z,1516718914.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:34.912Z,1516718914.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:34.937Z,1516718914.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:35.302Z,1516718915.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:35.328Z,1516718915.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:35.704Z,1516718915.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:35.741Z,1516718915.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:36.104Z,1516718916.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:36.140Z,1516718916.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:36.501Z,1516718916.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:36.516Z,1516718916.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:36.904Z,1516718916.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:36.945Z,1516718916.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:37.308Z,1516718917.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:37.322Z,1516718917.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:37.712Z,1516718917.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:37.727Z,1516718917.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:38.096Z,1516718918.096 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:48:38.113Z,1516718918.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:38.128Z,1516718918.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:38.516Z,1516718918.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:38.531Z,1516718918.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:38.910Z,1516718918.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:38.925Z,1516718918.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:39.309Z,1516718919.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:39.328Z,1516718919.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:39.711Z,1516718919.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:39.732Z,1516718919.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:40.109Z,1516718920.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:40.124Z,1516718920.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:40.125Z,1516718920.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:40.125Z,1516718920.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 230 2018-01-23T14:48:40.125Z,1516718920.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:48:40.138Z,1516718920.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:48:40.512Z,1516718920.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:40.527Z,1516718920.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:40.527Z,1516718920.527 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 230 2018-01-23T14:48:40.527Z,1516718920.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:48:40.540Z,1516718920.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:48:40.540Z,1516718920.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:48:40.540Z,1516718920.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 230 2018-01-23T14:48:40.910Z,1516718920.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:40.941Z,1516718920.941 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:48:40.941Z,1516718920.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:48:40.942Z,1516718920.942 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:48:40.968Z,1516718920.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:48:40.968Z,1516718920.968 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 230 2018-01-23T14:48:41.312Z,1516718921.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:41.339Z,1516718921.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:48:41.339Z,1516718921.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:48:41.340Z,1516718921.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:48:41.716Z,1516718921.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:41.730Z,1516718921.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:48:41.732Z,1516718921.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:42.108Z,1516718922.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:42.129Z,1516718922.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:48:42.130Z,1516718922.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:42.501Z,1516718922.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:42.527Z,1516718922.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:48:42.528Z,1516718922.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:42.916Z,1516718922.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:42.931Z,1516718922.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:48:42.932Z,1516718922.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:43.307Z,1516718923.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:43.330Z,1516718923.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:48:43.331Z,1516718923.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:43.712Z,1516718923.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:43.726Z,1516718923.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:48:43.727Z,1516718923.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:44.111Z,1516718924.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:44.126Z,1516718924.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:48:44.127Z,1516718924.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:44.520Z,1516718924.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:44.535Z,1516718924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:48:44.536Z,1516718924.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:44.912Z,1516718924.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:44.926Z,1516718924.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:48:44.927Z,1516718924.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:45.308Z,1516718925.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:45.333Z,1516718925.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:48:45.334Z,1516718925.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:45.708Z,1516718925.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:45.733Z,1516718925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:48:45.734Z,1516718925.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:46.112Z,1516718926.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:46.127Z,1516718926.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:48:46.128Z,1516718926.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:46.511Z,1516718926.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:46.526Z,1516718926.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:48:46.528Z,1516718926.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:46.907Z,1516718926.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:46.940Z,1516718926.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:48:46.941Z,1516718926.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:47.313Z,1516718927.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:47.328Z,1516718927.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:48:47.329Z,1516718927.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:50.415Z,1516718930.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:50.430Z,1516718930.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T14:48:50.431Z,1516718930.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:50.563Z,1516718930.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:50.584Z,1516718930.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T14:48:50.585Z,1516718930.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:50.872Z,1516718930.872 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:48:50.889Z,1516718930.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:50.923Z,1516718930.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:48:50.924Z,1516718930.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:51.285Z,1516718931.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:51.300Z,1516718931.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:48:51.301Z,1516718931.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:51.691Z,1516718931.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:51.706Z,1516718931.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:48:51.707Z,1516718931.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:52.103Z,1516718932.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:52.136Z,1516718932.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:48:52.137Z,1516718932.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:52.488Z,1516718932.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:52.503Z,1516718932.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:48:52.504Z,1516718932.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:52.886Z,1516718932.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:52.901Z,1516718932.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:48:52.902Z,1516718932.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:53.285Z,1516718933.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:53.299Z,1516718933.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:48:53.300Z,1516718933.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:53.685Z,1516718933.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:53.716Z,1516718933.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:48:53.717Z,1516718933.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:54.090Z,1516718934.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:54.105Z,1516718934.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:48:54.106Z,1516718934.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:54.491Z,1516718934.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:54.512Z,1516718934.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:48:54.513Z,1516718934.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:54.895Z,1516718934.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:54.916Z,1516718934.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:48:54.917Z,1516718934.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:55.293Z,1516718935.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:55.308Z,1516718935.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:48:55.309Z,1516718935.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:55.679Z,1516718935.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:55.711Z,1516718935.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:48:55.712Z,1516718935.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:56.086Z,1516718936.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:56.108Z,1516718936.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:48:56.109Z,1516718936.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:56.480Z,1516718936.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:56.502Z,1516718936.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:48:56.503Z,1516718936.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:56.899Z,1516718936.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:56.914Z,1516718936.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:48:56.915Z,1516718936.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:57.299Z,1516718937.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:57.320Z,1516718937.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:48:57.321Z,1516718937.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:57.696Z,1516718937.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:57.710Z,1516718937.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:48:57.711Z,1516718937.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:58.076Z,1516718938.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:58.102Z,1516718938.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:48:58.103Z,1516718938.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:58.489Z,1516718938.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:58.508Z,1516718938.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:48:58.509Z,1516718938.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:58.893Z,1516718938.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:58.908Z,1516718938.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:48:58.909Z,1516718938.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:59.294Z,1516718939.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:59.312Z,1516718939.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:48:59.313Z,1516718939.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:48:59.677Z,1516718939.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:48:59.713Z,1516718939.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:48:59.714Z,1516718939.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:00.099Z,1516718940.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:00.114Z,1516718940.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:49:00.115Z,1516718940.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:00.503Z,1516718940.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:00.518Z,1516718940.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T14:49:00.519Z,1516718940.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:00.895Z,1516718940.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:00.921Z,1516718940.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:01.277Z,1516718941.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:01.313Z,1516718941.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:01.682Z,1516718941.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:01.717Z,1516718941.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:02.095Z,1516718942.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:02.110Z,1516718942.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:02.481Z,1516718942.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:02.513Z,1516718942.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:02.903Z,1516718942.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:02.918Z,1516718942.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:03.300Z,1516718943.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:03.315Z,1516718943.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:03.703Z,1516718943.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:03.718Z,1516718943.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:04.093Z,1516718944.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:04.109Z,1516718944.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:04.477Z,1516718944.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:04.510Z,1516718944.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:04.892Z,1516718944.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:04.907Z,1516718944.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:05.297Z,1516718945.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:05.313Z,1516718945.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:05.681Z,1516718945.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:05.714Z,1516718945.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:06.099Z,1516718946.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:06.114Z,1516718946.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:06.496Z,1516718946.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:06.522Z,1516718946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:06.903Z,1516718946.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:06.918Z,1516718946.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:07.281Z,1516718947.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:07.306Z,1516718947.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:07.676Z,1516718947.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:07.709Z,1516718947.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:08.080Z,1516718948.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:08.109Z,1516718948.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:08.481Z,1516718948.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:08.506Z,1516718948.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:08.896Z,1516718948.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:08.926Z,1516718948.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:09.300Z,1516718949.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:09.314Z,1516718949.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:09.697Z,1516718949.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:09.717Z,1516718949.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:10.079Z,1516718950.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:10.113Z,1516718950.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:10.481Z,1516718950.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:10.508Z,1516718950.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:10.877Z,1516718950.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:10.909Z,1516718950.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:11.280Z,1516718951.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:11.315Z,1516718951.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:11.679Z,1516718951.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:11.693Z,1516718951.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:12.095Z,1516718952.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:12.122Z,1516718952.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:12.495Z,1516718952.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:12.521Z,1516718952.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:12.889Z,1516718952.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:12.921Z,1516718952.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:13.279Z,1516718953.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:13.294Z,1516718953.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:13.684Z,1516718953.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:13.716Z,1516718953.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:14.094Z,1516718954.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:14.109Z,1516718954.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:14.492Z,1516718954.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:14.507Z,1516718954.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:14.893Z,1516718954.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:14.920Z,1516718954.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:15.299Z,1516718955.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:15.314Z,1516718955.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:15.703Z,1516718955.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:15.718Z,1516718955.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:16.076Z,1516718956.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:16.114Z,1516718956.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:16.479Z,1516718956.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:16.507Z,1516718956.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:16.880Z,1516718956.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:16.906Z,1516718956.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:17.297Z,1516718957.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:17.313Z,1516718957.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:17.676Z,1516718957.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:17.712Z,1516718957.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:18.101Z,1516718958.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:18.121Z,1516718958.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:18.499Z,1516718958.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:18.514Z,1516718958.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:18.898Z,1516718958.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:18.928Z,1516718958.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:19.281Z,1516718959.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:19.311Z,1516718959.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:19.677Z,1516718959.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:19.705Z,1516718959.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:20.080Z,1516718960.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:20.115Z,1516718960.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:20.479Z,1516718960.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:20.505Z,1516718960.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:20.892Z,1516718960.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:20.917Z,1516718960.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:21.299Z,1516718961.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:21.326Z,1516718961.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:21.689Z,1516718961.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:21.721Z,1516718961.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:22.078Z,1516718962.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:22.113Z,1516718962.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:22.476Z,1516718962.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:22.516Z,1516718962.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:22.877Z,1516718962.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:22.911Z,1516718962.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:23.279Z,1516718963.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:23.294Z,1516718963.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:23.679Z,1516718963.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:23.694Z,1516718963.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:24.097Z,1516718964.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:24.124Z,1516718964.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:24.512Z,1516718964.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:24.533Z,1516718964.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:24.893Z,1516718964.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:24.925Z,1516718964.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:25.287Z,1516718965.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:25.302Z,1516718965.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:25.685Z,1516718965.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:25.728Z,1516718965.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:26.087Z,1516718966.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:26.104Z,1516718966.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:26.485Z,1516718966.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:26.500Z,1516718966.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:26.892Z,1516718966.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:26.907Z,1516718966.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:27.291Z,1516718967.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:27.329Z,1516718967.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:27.694Z,1516718967.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:27.702Z,1516718967.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x59371 got:0x54555 2018-01-23T14:49:27.740Z,1516718967.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:28.082Z,1516718968.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:28.107Z,1516718968.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:28.491Z,1516718968.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:28.505Z,1516718968.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:28.885Z,1516718968.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:28.917Z,1516718968.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:29.289Z,1516718969.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:29.308Z,1516718969.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:29.694Z,1516718969.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:29.709Z,1516718969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:30.090Z,1516718970.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:30.114Z,1516718970.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:30.494Z,1516718970.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:30.535Z,1516718970.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:30.895Z,1516718970.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:30.904Z,1516718970.904 [PNI_TCM](ERROR): CRC does not match. Expected:0x62066 got:0x17281 2018-01-23T14:49:30.926Z,1516718970.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:31.281Z,1516718971.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:31.306Z,1516718971.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:31.683Z,1516718971.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:31.711Z,1516718971.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:32.086Z,1516718972.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:32.116Z,1516718972.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:32.474Z,1516718972.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:32.505Z,1516718972.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:32.897Z,1516718972.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:32.913Z,1516718972.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:33.300Z,1516718973.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:33.336Z,1516718973.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:33.695Z,1516718973.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:33.742Z,1516718973.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:34.080Z,1516718974.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:34.110Z,1516718974.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:34.483Z,1516718974.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:34.512Z,1516718974.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:34.884Z,1516718974.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:34.907Z,1516718974.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:35.279Z,1516718975.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:35.305Z,1516718975.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:35.685Z,1516718975.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:35.709Z,1516718975.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:36.097Z,1516718976.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:36.113Z,1516718976.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:36.498Z,1516718976.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:36.525Z,1516718976.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:36.893Z,1516718976.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:36.921Z,1516718976.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:37.274Z,1516718977.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:37.314Z,1516718977.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:37.676Z,1516718977.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:37.713Z,1516718977.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:38.077Z,1516718978.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:38.113Z,1516718978.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:38.474Z,1516718978.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:38.501Z,1516718978.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:38.902Z,1516718978.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:38.925Z,1516718978.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:39.307Z,1516718979.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:39.321Z,1516718979.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:39.703Z,1516718979.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:39.718Z,1516718979.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:40.077Z,1516718980.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:40.125Z,1516718980.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:40.481Z,1516718980.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:40.511Z,1516718980.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:40.881Z,1516718980.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:40.912Z,1516718980.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:41.277Z,1516718981.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:41.310Z,1516718981.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:41.676Z,1516718981.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:41.712Z,1516718981.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:42.097Z,1516718982.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:42.115Z,1516718982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:42.498Z,1516718982.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:42.522Z,1516718982.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:42.902Z,1516718982.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:42.917Z,1516718982.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:43.274Z,1516718983.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:43.313Z,1516718983.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:43.684Z,1516718983.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:43.712Z,1516718983.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:44.077Z,1516718984.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:44.119Z,1516718984.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:44.476Z,1516718984.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:44.506Z,1516718984.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:44.887Z,1516718984.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:44.924Z,1516718984.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:45.301Z,1516718985.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:45.319Z,1516718985.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:45.687Z,1516718985.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:45.728Z,1516718985.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:46.081Z,1516718986.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:46.112Z,1516718986.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:46.476Z,1516718986.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:46.521Z,1516718986.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:46.891Z,1516718986.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:46.919Z,1516718986.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:47.291Z,1516718987.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:47.321Z,1516718987.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:47.687Z,1516718987.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:47.735Z,1516718987.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:50.786Z,1516718990.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:50.811Z,1516718990.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:50.921Z,1516718990.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:50.936Z,1516718990.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:51.270Z,1516718991.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:51.308Z,1516718991.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:51.671Z,1516718991.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:51.686Z,1516718991.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:52.070Z,1516718992.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:52.089Z,1516718992.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:52.460Z,1516718992.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:52.475Z,1516718992.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:52.861Z,1516718992.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:52.875Z,1516718992.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:53.265Z,1516718993.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:53.280Z,1516718993.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:53.657Z,1516718993.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:53.678Z,1516718993.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:54.070Z,1516718994.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:54.092Z,1516718994.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:54.474Z,1516718994.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:54.493Z,1516718994.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:54.871Z,1516718994.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:54.886Z,1516718994.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:55.262Z,1516718995.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:55.277Z,1516718995.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:55.661Z,1516718995.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:55.681Z,1516718995.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:56.055Z,1516718996.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:56.088Z,1516718996.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:56.461Z,1516718996.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:56.476Z,1516718996.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:56.871Z,1516718996.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:56.886Z,1516718996.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:57.274Z,1516718997.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:57.293Z,1516718997.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:57.671Z,1516718997.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:57.686Z,1516718997.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:58.060Z,1516718998.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:58.080Z,1516718998.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:58.460Z,1516718998.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:58.487Z,1516718998.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:58.872Z,1516718998.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:58.886Z,1516718998.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:59.275Z,1516718999.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:59.290Z,1516718999.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:49:59.671Z,1516718999.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:49:59.686Z,1516718999.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:00.053Z,1516719000.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:00.089Z,1516719000.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:00.452Z,1516719000.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:00.489Z,1516719000.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:00.872Z,1516719000.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:00.886Z,1516719000.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:01.277Z,1516719001.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:01.296Z,1516719001.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:01.672Z,1516719001.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:01.687Z,1516719001.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:02.070Z,1516719002.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:02.085Z,1516719002.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:02.453Z,1516719002.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:02.487Z,1516719002.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:02.876Z,1516719002.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:02.891Z,1516719002.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:03.279Z,1516719003.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:03.294Z,1516719003.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:03.667Z,1516719003.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:03.704Z,1516719003.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:04.069Z,1516719004.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:04.084Z,1516719004.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:04.453Z,1516719004.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:04.485Z,1516719004.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:04.875Z,1516719004.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:04.890Z,1516719004.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:05.268Z,1516719005.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:05.291Z,1516719005.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:05.666Z,1516719005.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:05.705Z,1516719005.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:06.053Z,1516719006.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:06.083Z,1516719006.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:06.452Z,1516719006.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:06.481Z,1516719006.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:06.879Z,1516719006.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:06.901Z,1516719006.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:07.276Z,1516719007.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:07.291Z,1516719007.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:07.668Z,1516719007.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:07.699Z,1516719007.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:08.057Z,1516719008.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:08.089Z,1516719008.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:08.452Z,1516719008.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:08.491Z,1516719008.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:08.863Z,1516719008.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:08.890Z,1516719008.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:09.271Z,1516719009.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:09.294Z,1516719009.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:09.663Z,1516719009.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:09.701Z,1516719009.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:10.050Z,1516719010.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:10.065Z,1516719010.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:10.453Z,1516719010.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:10.468Z,1516719010.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:10.852Z,1516719010.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:10.872Z,1516719010.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:11.267Z,1516719011.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:11.298Z,1516719011.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:11.679Z,1516719011.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:11.709Z,1516719011.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:12.075Z,1516719012.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:12.101Z,1516719012.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:12.454Z,1516719012.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:12.473Z,1516719012.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:12.858Z,1516719012.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:12.877Z,1516719012.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:13.261Z,1516719013.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:13.276Z,1516719013.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:13.657Z,1516719013.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:13.680Z,1516719013.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:14.075Z,1516719014.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:14.106Z,1516719014.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:14.467Z,1516719014.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:14.507Z,1516719014.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:14.875Z,1516719014.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:14.906Z,1516719014.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:15.258Z,1516719015.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:15.289Z,1516719015.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:15.653Z,1516719015.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:15.689Z,1516719015.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:16.051Z,1516719016.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:16.087Z,1516719016.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:16.470Z,1516719016.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:16.485Z,1516719016.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:16.852Z,1516719016.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:16.887Z,1516719016.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:17.269Z,1516719017.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:17.300Z,1516719017.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:17.680Z,1516719017.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:17.695Z,1516719017.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:18.069Z,1516719018.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:18.091Z,1516719018.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:18.452Z,1516719018.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:18.478Z,1516719018.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:18.852Z,1516719018.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:18.878Z,1516719018.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:19.253Z,1516719019.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:19.293Z,1516719019.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:19.651Z,1516719019.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:19.674Z,1516719019.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:20.071Z,1516719020.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:20.086Z,1516719020.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:20.475Z,1516719020.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:20.490Z,1516719020.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:20.871Z,1516719020.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:20.886Z,1516719020.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:21.252Z,1516719021.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:21.285Z,1516719021.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:21.653Z,1516719021.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:21.690Z,1516719021.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:22.050Z,1516719022.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:22.073Z,1516719022.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:22.453Z,1516719022.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:22.480Z,1516719022.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:22.851Z,1516719022.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:22.866Z,1516719022.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:23.263Z,1516719023.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:23.294Z,1516719023.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:23.675Z,1516719023.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:23.701Z,1516719023.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:24.067Z,1516719024.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:24.104Z,1516719024.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:24.454Z,1516719024.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:24.469Z,1516719024.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:24.864Z,1516719024.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:24.898Z,1516719024.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:25.265Z,1516719025.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:25.304Z,1516719025.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:25.653Z,1516719025.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:25.673Z,1516719025.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:26.075Z,1516719026.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:26.099Z,1516719026.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:26.479Z,1516719026.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:26.505Z,1516719026.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:26.871Z,1516719026.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:26.902Z,1516719026.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:27.262Z,1516719027.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:27.277Z,1516719027.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:27.660Z,1516719027.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:27.675Z,1516719027.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:28.058Z,1516719028.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:28.073Z,1516719028.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:28.458Z,1516719028.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:28.481Z,1516719028.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:28.861Z,1516719028.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:28.876Z,1516719028.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:29.263Z,1516719029.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:29.278Z,1516719029.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:29.667Z,1516719029.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:29.682Z,1516719029.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:30.075Z,1516719030.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:30.090Z,1516719030.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:30.450Z,1516719030.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:30.478Z,1516719030.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:30.852Z,1516719030.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:30.885Z,1516719030.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:31.253Z,1516719031.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:31.280Z,1516719031.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:31.653Z,1516719031.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:31.685Z,1516719031.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:32.071Z,1516719032.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:32.086Z,1516719032.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:32.476Z,1516719032.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:32.491Z,1516719032.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:32.871Z,1516719032.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:32.886Z,1516719032.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:33.252Z,1516719033.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:33.289Z,1516719033.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:33.653Z,1516719033.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:33.690Z,1516719033.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:34.050Z,1516719034.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:34.073Z,1516719034.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:34.453Z,1516719034.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:34.484Z,1516719034.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:34.852Z,1516719034.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:34.897Z,1516719034.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:35.263Z,1516719035.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:35.289Z,1516719035.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:35.668Z,1516719035.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:35.693Z,1516719035.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:36.062Z,1516719036.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:36.098Z,1516719036.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:36.450Z,1516719036.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:36.465Z,1516719036.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:36.853Z,1516719036.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:36.868Z,1516719036.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:37.257Z,1516719037.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:37.272Z,1516719037.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:37.657Z,1516719037.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:37.677Z,1516719037.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:38.068Z,1516719038.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:38.082Z,1516719038.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:38.467Z,1516719038.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:38.482Z,1516719038.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:38.863Z,1516719038.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:38.878Z,1516719038.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:39.260Z,1516719039.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:39.275Z,1516719039.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:39.661Z,1516719039.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:39.676Z,1516719039.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:40.057Z,1516719040.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:40.077Z,1516719040.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:40.460Z,1516719040.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:40.479Z,1516719040.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:40.861Z,1516719040.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:40.880Z,1516719040.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:41.264Z,1516719041.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:41.285Z,1516719041.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:41.679Z,1516719041.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:41.702Z,1516719041.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:42.067Z,1516719042.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:42.082Z,1516719042.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:42.456Z,1516719042.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:42.479Z,1516719042.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:42.869Z,1516719042.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:42.885Z,1516719042.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:43.263Z,1516719043.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:43.278Z,1516719043.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:43.658Z,1516719043.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:43.682Z,1516719043.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:44.075Z,1516719044.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:44.090Z,1516719044.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:44.475Z,1516719044.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:44.490Z,1516719044.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:44.873Z,1516719044.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:44.888Z,1516719044.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:45.256Z,1516719045.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:45.285Z,1516719045.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:45.653Z,1516719045.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:45.688Z,1516719045.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:46.050Z,1516719046.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:46.089Z,1516719046.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:46.457Z,1516719046.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:46.484Z,1516719046.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:46.852Z,1516719046.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:46.891Z,1516719046.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:47.271Z,1516719047.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:47.288Z,1516719047.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:47.678Z,1516719047.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:47.694Z,1516719047.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:48.071Z,1516719048.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:48.099Z,1516719048.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:51.151Z,1516719051.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:51.182Z,1516719051.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:51.275Z,1516719051.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:51.309Z,1516719051.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:51.663Z,1516719051.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:51.689Z,1516719051.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:52.075Z,1516719052.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:52.090Z,1516719052.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:52.463Z,1516719052.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:52.493Z,1516719052.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:52.857Z,1516719052.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:52.887Z,1516719052.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:53.250Z,1516719053.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:53.265Z,1516719053.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:53.646Z,1516719053.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:53.661Z,1516719053.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:54.064Z,1516719054.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:54.089Z,1516719054.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:54.455Z,1516719054.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:54.479Z,1516719054.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:54.855Z,1516719054.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:54.871Z,1516719054.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:55.249Z,1516719055.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:55.264Z,1516719055.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:55.647Z,1516719055.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:55.662Z,1516719055.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:56.044Z,1516719056.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:56.071Z,1516719056.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:56.451Z,1516719056.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:56.466Z,1516719056.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:56.849Z,1516719056.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:56.864Z,1516719056.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:57.253Z,1516719057.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:57.273Z,1516719057.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:57.655Z,1516719057.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:57.670Z,1516719057.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:58.054Z,1516719058.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:58.069Z,1516719058.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:58.448Z,1516719058.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:58.463Z,1516719058.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:58.846Z,1516719058.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:58.873Z,1516719058.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:59.250Z,1516719059.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:59.265Z,1516719059.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:50:59.648Z,1516719059.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:50:59.663Z,1516719059.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:00.053Z,1516719060.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:00.072Z,1516719060.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:00.461Z,1516719060.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:00.480Z,1516719060.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:00.858Z,1516719060.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:00.873Z,1516719060.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:01.248Z,1516719061.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:01.263Z,1516719061.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:01.647Z,1516719061.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:01.662Z,1516719061.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:02.044Z,1516719062.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:02.062Z,1516719062.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:02.449Z,1516719062.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:02.463Z,1516719062.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:02.849Z,1516719062.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:02.864Z,1516719062.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:03.258Z,1516719063.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:03.273Z,1516719063.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:03.662Z,1516719063.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:03.676Z,1516719063.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:04.060Z,1516719064.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:04.075Z,1516719064.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:04.447Z,1516719064.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:04.466Z,1516719064.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:04.848Z,1516719064.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:04.868Z,1516719064.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:05.254Z,1516719065.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:05.269Z,1516719065.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:05.662Z,1516719065.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:05.677Z,1516719065.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:06.062Z,1516719066.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:06.077Z,1516719066.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:06.458Z,1516719066.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:06.473Z,1516719066.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:06.859Z,1516719066.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:06.874Z,1516719066.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:07.244Z,1516719067.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:07.275Z,1516719067.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:07.638Z,1516719067.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:07.666Z,1516719067.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:08.044Z,1516719068.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:08.066Z,1516719068.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:08.445Z,1516719068.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:08.468Z,1516719068.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:08.849Z,1516719068.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:08.864Z,1516719068.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:09.258Z,1516719069.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:09.273Z,1516719069.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:09.662Z,1516719069.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:09.677Z,1516719069.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:10.058Z,1516719070.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:10.073Z,1516719070.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:10.443Z,1516719070.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:10.477Z,1516719070.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:10.852Z,1516719070.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:10.873Z,1516719070.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:11.241Z,1516719071.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:11.278Z,1516719071.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:11.652Z,1516719071.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:11.673Z,1516719071.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:12.056Z,1516719072.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:12.083Z,1516719072.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:12.460Z,1516719072.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:12.475Z,1516719072.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:12.856Z,1516719072.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:12.877Z,1516719072.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:13.240Z,1516719073.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:13.277Z,1516719073.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:13.645Z,1516719073.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:13.677Z,1516719073.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:14.040Z,1516719074.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:14.076Z,1516719074.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:14.441Z,1516719074.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:14.473Z,1516719074.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:14.840Z,1516719074.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:14.871Z,1516719074.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:15.267Z,1516719075.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:15.282Z,1516719075.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:15.656Z,1516719075.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:15.694Z,1516719075.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:16.055Z,1516719076.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:16.089Z,1516719076.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:16.441Z,1516719076.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:16.456Z,1516719076.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:16.841Z,1516719076.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:16.856Z,1516719076.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:17.246Z,1516719077.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:17.261Z,1516719077.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:17.650Z,1516719077.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:17.665Z,1516719077.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:18.056Z,1516719078.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:18.071Z,1516719078.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:18.455Z,1516719078.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:18.470Z,1516719078.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:18.852Z,1516719078.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:18.867Z,1516719078.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:19.248Z,1516719079.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:19.264Z,1516719079.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:19.649Z,1516719079.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:19.665Z,1516719079.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:20.048Z,1516719080.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:20.067Z,1516719080.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:20.446Z,1516719080.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:20.465Z,1516719080.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:20.849Z,1516719080.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:20.865Z,1516719080.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:21.255Z,1516719081.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:21.270Z,1516719081.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:21.656Z,1516719081.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:21.671Z,1516719081.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:22.055Z,1516719082.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:22.070Z,1516719082.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:22.449Z,1516719082.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:22.464Z,1516719082.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:22.849Z,1516719082.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:22.864Z,1516719082.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:23.250Z,1516719083.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:23.265Z,1516719083.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:23.647Z,1516719083.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:23.668Z,1516719083.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:24.054Z,1516719084.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:24.070Z,1516719084.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:24.454Z,1516719084.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:24.469Z,1516719084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:24.855Z,1516719084.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:24.871Z,1516719084.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:25.248Z,1516719085.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:25.262Z,1516719085.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:25.650Z,1516719085.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:25.665Z,1516719085.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:26.048Z,1516719086.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:26.069Z,1516719086.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:26.449Z,1516719086.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:26.464Z,1516719086.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:26.849Z,1516719086.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:26.864Z,1516719086.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:27.254Z,1516719087.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:27.277Z,1516719087.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:27.655Z,1516719087.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:27.670Z,1516719087.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:28.055Z,1516719088.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:28.070Z,1516719088.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:28.447Z,1516719088.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:28.462Z,1516719088.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:28.848Z,1516719088.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:28.863Z,1516719088.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:29.250Z,1516719089.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:29.265Z,1516719089.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:29.649Z,1516719089.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:29.664Z,1516719089.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:29.666Z,1516719089.666 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:29.666Z,1516719089.666 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 231 2018-01-23T14:51:29.666Z,1516719089.666 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:51:29.678Z,1516719089.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:51:30.058Z,1516719090.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:30.073Z,1516719090.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:30.085Z,1516719090.085 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:51:30.085Z,1516719090.085 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 231 2018-01-23T14:51:30.459Z,1516719090.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:30.474Z,1516719090.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:30.475Z,1516719090.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:51:30.476Z,1516719090.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:51:30.476Z,1516719090.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:51:30.858Z,1516719090.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:30.873Z,1516719090.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:31.249Z,1516719091.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:31.268Z,1516719091.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:31.651Z,1516719091.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:31.666Z,1516719091.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:32.043Z,1516719092.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:32.076Z,1516719092.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:32.450Z,1516719092.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:32.465Z,1516719092.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:32.851Z,1516719092.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:32.866Z,1516719092.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:33.259Z,1516719093.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:33.274Z,1516719093.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:33.660Z,1516719093.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:33.687Z,1516719093.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:34.064Z,1516719094.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:34.085Z,1516719094.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:34.450Z,1516719094.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:34.469Z,1516719094.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:34.848Z,1516719094.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:34.869Z,1516719094.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:35.250Z,1516719095.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:35.265Z,1516719095.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:35.643Z,1516719095.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:35.667Z,1516719095.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:36.059Z,1516719096.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:36.074Z,1516719096.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:36.462Z,1516719096.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:36.477Z,1516719096.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:36.856Z,1516719096.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:36.883Z,1516719096.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:37.241Z,1516719097.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:37.273Z,1516719097.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:37.640Z,1516719097.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:37.671Z,1516719097.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:38.051Z,1516719098.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:38.077Z,1516719098.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:38.463Z,1516719098.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:38.478Z,1516719098.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:38.851Z,1516719098.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:38.879Z,1516719098.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:39.241Z,1516719099.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:39.276Z,1516719099.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:39.640Z,1516719099.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:39.677Z,1516719099.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:40.051Z,1516719100.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:40.078Z,1516719100.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:40.463Z,1516719100.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:40.481Z,1516719100.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:40.851Z,1516719100.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:40.877Z,1516719100.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:41.245Z,1516719101.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:41.281Z,1516719101.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:41.283Z,1516719101.283 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:41.283Z,1516719101.283 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 231 2018-01-23T14:51:41.283Z,1516719101.283 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:51:41.296Z,1516719101.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:51:41.643Z,1516719101.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:41.689Z,1516719101.689 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:41.689Z,1516719101.689 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 231 2018-01-23T14:51:41.689Z,1516719101.689 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:51:41.706Z,1516719101.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:51:41.706Z,1516719101.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:51:41.706Z,1516719101.706 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 231 2018-01-23T14:51:42.051Z,1516719102.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:42.087Z,1516719102.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:51:42.088Z,1516719102.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:51:42.088Z,1516719102.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:51:42.100Z,1516719102.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:51:42.100Z,1516719102.100 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 231 2018-01-23T14:51:42.455Z,1516719102.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:42.481Z,1516719102.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:51:42.481Z,1516719102.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:51:42.482Z,1516719102.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:51:42.851Z,1516719102.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:42.886Z,1516719102.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:51:42.887Z,1516719102.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:43.241Z,1516719103.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:43.284Z,1516719103.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:51:43.285Z,1516719103.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:43.645Z,1516719103.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:43.681Z,1516719103.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:51:43.682Z,1516719103.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:44.067Z,1516719104.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:44.082Z,1516719104.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:51:44.083Z,1516719104.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:44.455Z,1516719104.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:44.481Z,1516719104.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:51:44.482Z,1516719104.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:44.852Z,1516719104.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:44.881Z,1516719104.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:51:44.882Z,1516719104.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:45.241Z,1516719105.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:45.280Z,1516719105.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:51:45.281Z,1516719105.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:45.640Z,1516719105.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:45.655Z,1516719105.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:51:45.656Z,1516719105.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:46.064Z,1516719106.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:46.090Z,1516719106.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:51:46.091Z,1516719106.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:46.476Z,1516719106.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:46.490Z,1516719106.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:51:46.491Z,1516719106.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:46.855Z,1516719106.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:46.886Z,1516719106.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:51:46.887Z,1516719106.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:47.250Z,1516719107.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:47.265Z,1516719107.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:51:47.266Z,1516719107.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:47.646Z,1516719107.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:47.665Z,1516719107.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:51:47.666Z,1516719107.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:48.055Z,1516719108.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:48.070Z,1516719108.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:51:48.071Z,1516719108.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:48.455Z,1516719108.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:48.470Z,1516719108.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:51:48.471Z,1516719108.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:51.563Z,1516719111.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:51.595Z,1516719111.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T14:51:51.596Z,1516719111.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:51.696Z,1516719111.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:51.728Z,1516719111.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:51:51.729Z,1516719111.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:52.064Z,1516719112.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:52.100Z,1516719112.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:51:52.101Z,1516719112.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:52.465Z,1516719112.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:52.484Z,1516719112.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:51:52.485Z,1516719112.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:52.863Z,1516719112.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:52.878Z,1516719112.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:51:52.879Z,1516719112.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:53.271Z,1516719113.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:53.286Z,1516719113.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:51:53.287Z,1516719113.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:53.679Z,1516719113.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:53.694Z,1516719113.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:51:53.715Z,1516719113.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:54.070Z,1516719114.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:54.084Z,1516719114.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:51:54.085Z,1516719114.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:54.470Z,1516719114.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:54.485Z,1516719114.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:51:54.486Z,1516719114.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:54.865Z,1516719114.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:54.880Z,1516719114.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:51:54.881Z,1516719114.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:55.265Z,1516719115.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:55.280Z,1516719115.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:51:55.281Z,1516719115.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:55.661Z,1516719115.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:55.688Z,1516719115.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:51:55.689Z,1516719115.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:56.074Z,1516719116.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:56.089Z,1516719116.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:51:56.090Z,1516719116.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:56.474Z,1516719116.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:56.489Z,1516719116.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:51:56.489Z,1516719116.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:56.876Z,1516719116.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:56.890Z,1516719116.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:51:56.891Z,1516719116.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:57.261Z,1516719117.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:57.292Z,1516719117.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:51:57.293Z,1516719117.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:57.669Z,1516719117.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:57.684Z,1516719117.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:51:57.685Z,1516719117.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:58.074Z,1516719118.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:58.097Z,1516719118.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:51:58.098Z,1516719118.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:58.479Z,1516719118.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:58.494Z,1516719118.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:51:58.495Z,1516719118.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:58.876Z,1516719118.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:58.890Z,1516719118.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:51:58.891Z,1516719118.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:59.257Z,1516719119.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:59.294Z,1516719119.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:51:59.295Z,1516719119.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:51:59.670Z,1516719119.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:51:59.685Z,1516719119.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:51:59.686Z,1516719119.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:00.075Z,1516719120.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:00.096Z,1516719120.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:52:00.097Z,1516719120.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:00.480Z,1516719120.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:00.495Z,1516719120.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:52:00.496Z,1516719120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:00.879Z,1516719120.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:00.902Z,1516719120.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:52:00.907Z,1516719120.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:01.258Z,1516719121.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:01.285Z,1516719121.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:52:01.286Z,1516719121.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:01.657Z,1516719121.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:01.689Z,1516719121.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:02.072Z,1516719122.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:02.100Z,1516719122.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:02.484Z,1516719122.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:02.500Z,1516719122.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:02.868Z,1516719122.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:02.901Z,1516719122.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:03.257Z,1516719123.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:03.273Z,1516719123.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:03.664Z,1516719123.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:03.696Z,1516719123.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:04.072Z,1516719124.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:04.101Z,1516719124.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:04.480Z,1516719124.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:04.502Z,1516719124.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:04.875Z,1516719124.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:04.909Z,1516719124.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:05.268Z,1516719125.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:05.284Z,1516719125.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:05.662Z,1516719125.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:05.688Z,1516719125.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:06.079Z,1516719126.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:06.115Z,1516719126.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:06.470Z,1516719126.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:06.484Z,1516719126.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:06.870Z,1516719126.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:06.893Z,1516719126.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:07.268Z,1516719127.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:07.283Z,1516719127.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:07.666Z,1516719127.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:07.684Z,1516719127.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:08.071Z,1516719128.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:08.087Z,1516719128.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:08.470Z,1516719128.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:08.485Z,1516719128.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:08.871Z,1516719128.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:08.885Z,1516719128.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:09.268Z,1516719129.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:09.289Z,1516719129.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:09.672Z,1516719129.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:09.687Z,1516719129.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:10.075Z,1516719130.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:10.090Z,1516719130.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:10.475Z,1516719130.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:10.490Z,1516719130.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:10.874Z,1516719130.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:10.889Z,1516719130.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:11.267Z,1516719131.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:11.281Z,1516719131.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:11.666Z,1516719131.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:11.681Z,1516719131.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:12.075Z,1516719132.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:12.090Z,1516719132.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:12.475Z,1516719132.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:12.496Z,1516719132.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:12.874Z,1516719132.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:12.890Z,1516719132.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:13.272Z,1516719133.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:13.287Z,1516719133.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:13.665Z,1516719133.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:13.681Z,1516719133.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:14.072Z,1516719134.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:14.096Z,1516719134.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:14.477Z,1516719134.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:14.498Z,1516719134.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:14.876Z,1516719134.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:14.893Z,1516719134.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:15.257Z,1516719135.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:15.289Z,1516719135.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:15.657Z,1516719135.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:15.684Z,1516719135.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:16.067Z,1516719136.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:16.100Z,1516719136.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:16.474Z,1516719136.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:16.511Z,1516719136.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:16.871Z,1516719136.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:16.898Z,1516719136.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:17.262Z,1516719137.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:17.276Z,1516719137.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:17.668Z,1516719137.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:17.705Z,1516719137.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:18.079Z,1516719138.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:18.111Z,1516719138.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:18.475Z,1516719138.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:18.489Z,1516719138.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:18.867Z,1516719138.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:18.883Z,1516719138.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:19.264Z,1516719139.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:19.279Z,1516719139.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:19.664Z,1516719139.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:19.679Z,1516719139.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:20.067Z,1516719140.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:20.083Z,1516719140.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:20.471Z,1516719140.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:20.486Z,1516719140.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:20.878Z,1516719140.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:20.892Z,1516719140.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:21.266Z,1516719141.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:21.281Z,1516719141.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:21.664Z,1516719141.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:21.679Z,1516719141.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:22.067Z,1516719142.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:22.082Z,1516719142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:22.479Z,1516719142.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:22.494Z,1516719142.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:22.871Z,1516719142.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:22.886Z,1516719142.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:23.265Z,1516719143.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:23.284Z,1516719143.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:23.672Z,1516719143.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:23.693Z,1516719143.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:24.064Z,1516719144.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:24.079Z,1516719144.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:24.474Z,1516719144.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:24.496Z,1516719144.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:24.875Z,1516719144.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:24.897Z,1516719144.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:25.275Z,1516719145.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:25.290Z,1516719145.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:25.665Z,1516719145.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:25.680Z,1516719145.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:26.063Z,1516719146.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:26.084Z,1516719146.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:26.465Z,1516719146.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:26.480Z,1516719146.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:26.865Z,1516719146.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:26.884Z,1516719146.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:27.278Z,1516719147.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:27.293Z,1516719147.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:27.677Z,1516719147.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:27.692Z,1516719147.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:28.076Z,1516719148.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:28.090Z,1516719148.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:28.463Z,1516719148.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:28.484Z,1516719148.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:28.865Z,1516719148.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:28.881Z,1516719148.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:29.261Z,1516719149.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:29.289Z,1516719149.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:29.672Z,1516719149.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:29.695Z,1516719149.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:30.056Z,1516719150.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:30.082Z,1516719150.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:30.476Z,1516719150.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:30.490Z,1516719150.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:30.879Z,1516719150.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:30.894Z,1516719150.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:31.274Z,1516719151.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:31.289Z,1516719151.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:31.657Z,1516719151.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:31.683Z,1516719151.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:32.068Z,1516719152.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:32.088Z,1516719152.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:32.457Z,1516719152.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:32.489Z,1516719152.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:32.869Z,1516719152.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:32.883Z,1516719152.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:33.279Z,1516719153.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:33.294Z,1516719153.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:33.679Z,1516719153.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:33.694Z,1516719153.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:34.075Z,1516719154.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:34.090Z,1516719154.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:34.456Z,1516719154.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:34.493Z,1516719154.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:34.860Z,1516719154.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:34.886Z,1516719154.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:35.256Z,1516719155.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:35.285Z,1516719155.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:35.682Z,1516719155.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:35.698Z,1516719155.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:36.056Z,1516719156.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:36.082Z,1516719156.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:36.487Z,1516719156.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:36.509Z,1516719156.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:36.883Z,1516719156.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:36.898Z,1516719156.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:37.278Z,1516719157.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:37.293Z,1516719157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:37.657Z,1516719157.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:37.696Z,1516719157.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:38.060Z,1516719158.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:38.093Z,1516719158.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:38.457Z,1516719158.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:38.485Z,1516719158.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:38.856Z,1516719158.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:38.889Z,1516719158.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:39.276Z,1516719159.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:39.304Z,1516719159.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:39.684Z,1516719159.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:39.699Z,1516719159.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:40.074Z,1516719160.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:40.100Z,1516719160.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:40.455Z,1516719160.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:40.478Z,1516719160.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:40.857Z,1516719160.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:40.888Z,1516719160.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:41.261Z,1516719161.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:41.303Z,1516719161.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:41.657Z,1516719161.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:41.692Z,1516719161.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:42.065Z,1516719162.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:42.096Z,1516719162.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:42.476Z,1516719162.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:42.504Z,1516719162.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:42.880Z,1516719162.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:42.913Z,1516719162.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:43.280Z,1516719163.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:43.306Z,1516719163.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:43.669Z,1516719163.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:43.706Z,1516719163.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:44.058Z,1516719164.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:44.073Z,1516719164.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:44.469Z,1516719164.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:44.484Z,1516719164.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:44.864Z,1516719164.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:44.878Z,1516719164.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:45.275Z,1516719165.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:45.290Z,1516719165.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:45.671Z,1516719165.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:45.686Z,1516719165.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:46.067Z,1516719166.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:46.088Z,1516719166.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:46.461Z,1516719166.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:46.481Z,1516719166.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:46.864Z,1516719166.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:46.879Z,1516719166.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:46.882Z,1516719166.882 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:47:46.6Z 2018-01-23T14:52:46.883Z,1516719166.883 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T14:52:46.883Z,1516719166.883 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T14:52:47.264Z,1516719167.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:47.285Z,1516719167.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:47.787Z,1516719167.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:47.812Z,1516719167.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:48.065Z,1516719168.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:48.080Z,1516719168.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:51.163Z,1516719171.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:51.179Z,1516719171.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:51.255Z,1516719171.255 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0272.lzma 2018-01-23T14:52:51.287Z,1516719171.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:51.318Z,1516719171.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:51.644Z,1516719171.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:51.669Z,1516719171.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:52.002Z,1516719172.002 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0272.lzma.bak 2018-01-23T14:52:52.002Z,1516719172.002 [DataOverHttps](INFO): SBD MOMSN=7755739 2018-01-23T14:52:52.036Z,1516719172.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:52.073Z,1516719172.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:52.780Z,1516719172.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:52.795Z,1516719172.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:52.904Z,1516719172.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:52.935Z,1516719172.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:55.974Z,1516719175.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:55.989Z,1516719175.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:56.100Z,1516719176.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:56.128Z,1516719176.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:56.459Z,1516719176.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:56.481Z,1516719176.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:56.843Z,1516719176.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:56.858Z,1516719176.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:57.238Z,1516719177.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:57.259Z,1516719177.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:52:57.655Z,1516719177.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:52:57.686Z,1516719177.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:00.737Z,1516719180.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:00.752Z,1516719180.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:00.831Z,1516719180.831 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0273.lzma 2018-01-23T14:53:00.864Z,1516719180.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:00.900Z,1516719180.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:01.213Z,1516719181.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:01.238Z,1516719181.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:01.585Z,1516719181.585 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0273.lzma.bak 2018-01-23T14:53:01.585Z,1516719181.585 [DataOverHttps](INFO): SBD MOMSN=7755741 2018-01-23T14:53:01.635Z,1516719181.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:01.650Z,1516719181.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:02.249Z,1516719182.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:02.263Z,1516719182.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:02.266Z,1516719182.266 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T14:53:02.266Z,1516719182.266 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T14:53:02.266Z,1516719182.266 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T14:53:02.406Z,1516719182.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:02.445Z,1516719182.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:05.510Z,1516719185.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:05.551Z,1516719185.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:05.649Z,1516719185.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:05.669Z,1516719185.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:06.011Z,1516719186.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:06.037Z,1516719186.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:06.418Z,1516719186.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:06.434Z,1516719186.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x32927 got:0x36725 2018-01-23T14:53:06.453Z,1516719186.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:06.798Z,1516719186.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:06.838Z,1516719186.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:07.198Z,1516719187.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:07.221Z,1516719187.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:07.602Z,1516719187.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:07.618Z,1516719187.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:08.002Z,1516719188.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:08.021Z,1516719188.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:08.416Z,1516719188.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:08.430Z,1516719188.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:08.811Z,1516719188.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:08.826Z,1516719188.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:09.207Z,1516719189.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:09.224Z,1516719189.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:09.597Z,1516719189.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:09.624Z,1516719189.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:10.002Z,1516719190.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:10.017Z,1516719190.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:10.397Z,1516719190.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:10.424Z,1516719190.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:10.793Z,1516719190.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:10.819Z,1516719190.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:11.212Z,1516719191.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:11.236Z,1516719191.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:11.614Z,1516719191.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:11.663Z,1516719191.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:12.010Z,1516719192.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:12.042Z,1516719192.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:12.412Z,1516719192.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:12.428Z,1516719192.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:12.793Z,1516719192.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:12.826Z,1516719192.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:13.208Z,1516719193.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:13.242Z,1516719193.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:13.616Z,1516719193.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:13.631Z,1516719193.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:14.014Z,1516719194.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:14.031Z,1516719194.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:14.393Z,1516719194.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:14.439Z,1516719194.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:14.796Z,1516719194.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:14.825Z,1516719194.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:15.212Z,1516719195.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:15.232Z,1516719195.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:15.616Z,1516719195.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:15.632Z,1516719195.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:16.012Z,1516719196.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:16.044Z,1516719196.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:16.393Z,1516719196.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:16.421Z,1516719196.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:16.792Z,1516719196.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:16.830Z,1516719196.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:17.203Z,1516719197.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:17.243Z,1516719197.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:17.603Z,1516719197.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:17.642Z,1516719197.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:18.011Z,1516719198.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:18.037Z,1516719198.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:18.398Z,1516719198.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:18.434Z,1516719198.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:18.798Z,1516719198.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:18.833Z,1516719198.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:19.222Z,1516719199.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:19.240Z,1516719199.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:19.626Z,1516719199.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:19.649Z,1516719199.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:20.011Z,1516719200.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:20.041Z,1516719200.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:20.405Z,1516719200.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:20.435Z,1516719200.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:20.798Z,1516719200.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:20.812Z,1516719200.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:21.207Z,1516719201.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:21.239Z,1516719201.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:21.611Z,1516719201.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:21.643Z,1516719201.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:22.015Z,1516719202.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:22.042Z,1516719202.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:22.397Z,1516719202.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:22.412Z,1516719202.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:22.797Z,1516719202.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:22.824Z,1516719202.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:23.216Z,1516719203.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:23.271Z,1516719203.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:23.606Z,1516719203.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:23.633Z,1516719203.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:24.014Z,1516719204.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:24.029Z,1516719204.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:24.403Z,1516719204.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:24.421Z,1516719204.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:24.806Z,1516719204.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:24.821Z,1516719204.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:25.216Z,1516719205.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:25.231Z,1516719205.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:25.614Z,1516719205.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:25.629Z,1516719205.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:26.012Z,1516719206.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:26.033Z,1516719206.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:26.400Z,1516719206.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:26.421Z,1516719206.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:26.802Z,1516719206.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:26.821Z,1516719206.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:27.211Z,1516719207.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:27.233Z,1516719207.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:27.616Z,1516719207.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:27.637Z,1516719207.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:28.009Z,1516719208.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:28.040Z,1516719208.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:28.393Z,1516719208.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:28.421Z,1516719208.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:28.792Z,1516719208.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:28.833Z,1516719208.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:29.207Z,1516719209.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:29.236Z,1516719209.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:29.603Z,1516719209.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:29.630Z,1516719209.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:30.011Z,1516719210.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:30.041Z,1516719210.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:30.405Z,1516719210.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:30.445Z,1516719210.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:30.797Z,1516719210.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:30.817Z,1516719210.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:31.216Z,1516719211.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:31.239Z,1516719211.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:31.619Z,1516719211.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:31.645Z,1516719211.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:32.011Z,1516719212.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:32.042Z,1516719212.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:32.405Z,1516719212.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:32.420Z,1516719212.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:32.797Z,1516719212.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:32.837Z,1516719212.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:33.203Z,1516719213.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:33.219Z,1516719213.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:33.607Z,1516719213.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:33.622Z,1516719213.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:34.006Z,1516719214.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:34.022Z,1516719214.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:34.400Z,1516719214.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:34.419Z,1516719214.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:34.800Z,1516719214.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:34.815Z,1516719214.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:35.206Z,1516719215.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:35.222Z,1516719215.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:35.607Z,1516719215.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:35.622Z,1516719215.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:36.008Z,1516719216.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:36.029Z,1516719216.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:36.400Z,1516719216.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:36.422Z,1516719216.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:36.794Z,1516719216.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:36.818Z,1516719216.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:37.214Z,1516719217.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:37.237Z,1516719217.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:37.616Z,1516719217.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:37.631Z,1516719217.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:38.012Z,1516719218.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:38.027Z,1516719218.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:38.393Z,1516719218.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:38.429Z,1516719218.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:38.796Z,1516719218.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:38.825Z,1516719218.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:39.211Z,1516719219.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:39.227Z,1516719219.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:39.614Z,1516719219.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:39.633Z,1516719219.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:40.007Z,1516719220.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:40.040Z,1516719220.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:40.393Z,1516719220.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:40.425Z,1516719220.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:40.791Z,1516719220.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:40.825Z,1516719220.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:41.211Z,1516719221.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:41.239Z,1516719221.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:41.615Z,1516719221.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:41.631Z,1516719221.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:42.003Z,1516719222.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:42.029Z,1516719222.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:42.394Z,1516719222.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:42.421Z,1516719222.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:42.792Z,1516719222.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:42.833Z,1516719222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:43.203Z,1516719223.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:43.234Z,1516719223.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:43.615Z,1516719223.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:43.642Z,1516719223.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:44.016Z,1516719224.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:44.045Z,1516719224.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:44.404Z,1516719224.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:44.427Z,1516719224.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:44.805Z,1516719224.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:44.821Z,1516719224.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:45.207Z,1516719225.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:45.223Z,1516719225.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:45.607Z,1516719225.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:45.622Z,1516719225.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:46.004Z,1516719226.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:46.019Z,1516719226.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:46.400Z,1516719226.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:46.416Z,1516719226.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:46.808Z,1516719226.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:46.823Z,1516719226.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:47.200Z,1516719227.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:47.229Z,1516719227.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:47.608Z,1516719227.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:47.623Z,1516719227.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:48.020Z,1516719228.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:48.034Z,1516719228.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:48.412Z,1516719228.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:48.428Z,1516719228.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:48.801Z,1516719228.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:48.821Z,1516719228.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:49.200Z,1516719229.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:49.221Z,1516719229.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:49.604Z,1516719229.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:49.619Z,1516719229.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:49.999Z,1516719229.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:50.022Z,1516719230.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:50.411Z,1516719230.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:50.450Z,1516719230.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:50.811Z,1516719230.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:50.827Z,1516719230.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:51.211Z,1516719231.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:51.226Z,1516719231.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:51.596Z,1516719231.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:51.623Z,1516719231.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:51.000Z,1516719232.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:52.016Z,1516719232.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:52.400Z,1516719232.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:52.420Z,1516719232.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:52.795Z,1516719232.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:52.837Z,1516719232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:53.205Z,1516719233.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:53.220Z,1516719233.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:53.608Z,1516719233.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:53.632Z,1516719233.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:54.016Z,1516719234.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:54.038Z,1516719234.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:54.425Z,1516719234.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:54.823Z,1516719234.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:55.221Z,1516719235.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:55.636Z,1516719235.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:56.021Z,1516719236.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:56.436Z,1516719236.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:56.830Z,1516719236.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:57.226Z,1516719237.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:57.621Z,1516719237.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:57.993Z,1516719237.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:58.027Z,1516719238.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:58.397Z,1516719238.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:58.423Z,1516719238.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:58.793Z,1516719238.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:58.821Z,1516719238.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:59.192Z,1516719239.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:59.230Z,1516719239.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:53:59.616Z,1516719239.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:53:59.631Z,1516719239.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:00.013Z,1516719240.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:00.036Z,1516719240.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:00.402Z,1516719240.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:00.437Z,1516719240.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:00.792Z,1516719240.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:00.829Z,1516719240.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:01.196Z,1516719241.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:01.237Z,1516719241.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:01.616Z,1516719241.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:02.037Z,1516719242.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:02.445Z,1516719242.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:02.819Z,1516719242.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:02.846Z,1516719242.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:05.912Z,1516719245.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:05.942Z,1516719245.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:06.038Z,1516719246.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:06.085Z,1516719246.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:06.390Z,1516719246.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:06.414Z,1516719246.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:06.812Z,1516719246.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:07.206Z,1516719247.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:07.617Z,1516719247.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:08.017Z,1516719248.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:08.417Z,1516719248.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:08.811Z,1516719248.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:09.208Z,1516719249.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:09.609Z,1516719249.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:10.007Z,1516719250.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:10.399Z,1516719250.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:10.421Z,1516719250.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:10.802Z,1516719250.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:10.817Z,1516719250.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:11.202Z,1516719251.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:11.217Z,1516719251.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:11.611Z,1516719251.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:12.008Z,1516719252.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:12.415Z,1516719252.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:12.812Z,1516719252.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:13.208Z,1516719253.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:13.621Z,1516719253.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:14.018Z,1516719254.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:14.417Z,1516719254.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:14.813Z,1516719254.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:15.216Z,1516719255.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:15.609Z,1516719255.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:16.013Z,1516719256.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:16.418Z,1516719256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:16.821Z,1516719256.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:17.221Z,1516719257.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:17.612Z,1516719257.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:18.007Z,1516719258.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:18.406Z,1516719258.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:18.812Z,1516719258.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:19.207Z,1516719259.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:19.625Z,1516719259.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:20.025Z,1516719260.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:20.418Z,1516719260.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:20.813Z,1516719260.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:21.222Z,1516719261.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:21.612Z,1516719261.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:22.017Z,1516719262.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:22.423Z,1516719262.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:22.823Z,1516719262.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:23.221Z,1516719263.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:23.616Z,1516719263.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:24.019Z,1516719264.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:24.419Z,1516719264.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:24.812Z,1516719264.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:25.223Z,1516719265.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:25.622Z,1516719265.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:26.037Z,1516719266.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:26.437Z,1516719266.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:26.801Z,1516719266.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:27.190Z,1516719267.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:27.205Z,1516719267.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:27.595Z,1516719267.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:27.610Z,1516719267.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:27.989Z,1516719267.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:28.016Z,1516719268.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:28.396Z,1516719268.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:28.412Z,1516719268.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:28.800Z,1516719268.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:28.821Z,1516719268.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:29.200Z,1516719269.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:29.216Z,1516719269.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:29.593Z,1516719269.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:29.609Z,1516719269.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:29.993Z,1516719269.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:30.013Z,1516719270.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:30.392Z,1516719270.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:30.408Z,1516719270.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:30.794Z,1516719270.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:30.809Z,1516719270.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:30.811Z,1516719270.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:30.811Z,1516719270.811 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 232 2018-01-23T14:54:30.812Z,1516719270.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:54:30.824Z,1516719270.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:54:31.188Z,1516719271.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:31.215Z,1516719271.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:31.244Z,1516719271.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:54:31.244Z,1516719271.244 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 232 2018-01-23T14:54:31.603Z,1516719271.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:31.618Z,1516719271.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:31.620Z,1516719271.620 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:54:31.620Z,1516719271.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:54:31.621Z,1516719271.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:54:32.006Z,1516719272.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:32.025Z,1516719272.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:32.051Z,1516719272.051 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T14:54:32.402Z,1516719272.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:32.417Z,1516719272.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:32.788Z,1516719272.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:32.810Z,1516719272.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:33.194Z,1516719273.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:33.212Z,1516719273.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:33.589Z,1516719273.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:33.612Z,1516719273.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:33.987Z,1516719273.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:34.018Z,1516719274.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:34.406Z,1516719274.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:34.421Z,1516719274.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:34.805Z,1516719274.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:34.825Z,1516719274.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:35.203Z,1516719275.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:35.217Z,1516719275.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:35.619Z,1516719275.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:36.009Z,1516719276.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:36.421Z,1516719276.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:36.812Z,1516719276.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:37.213Z,1516719277.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:37.618Z,1516719277.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:38.027Z,1516719278.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:38.420Z,1516719278.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:38.821Z,1516719278.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:39.199Z,1516719279.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:39.608Z,1516719279.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:40.013Z,1516719280.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:40.440Z,1516719280.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:40.818Z,1516719280.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:41.222Z,1516719281.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:41.597Z,1516719281.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:41.611Z,1516719281.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:41.997Z,1516719281.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:42.012Z,1516719282.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:42.393Z,1516719282.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:42.408Z,1516719282.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:42.409Z,1516719282.409 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:42.409Z,1516719282.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 232 2018-01-23T14:54:42.409Z,1516719282.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:54:42.422Z,1516719282.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:54:42.793Z,1516719282.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:42.809Z,1516719282.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:42.809Z,1516719282.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 232 2018-01-23T14:54:42.809Z,1516719282.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:54:42.822Z,1516719282.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:54:42.822Z,1516719282.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:54:42.822Z,1516719282.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 232 2018-01-23T14:54:43.184Z,1516719283.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:43.216Z,1516719283.216 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:54:43.216Z,1516719283.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:54:43.217Z,1516719283.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:54:43.229Z,1516719283.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:54:43.229Z,1516719283.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 232 2018-01-23T14:54:43.600Z,1516719283.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:43.631Z,1516719283.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:54:43.631Z,1516719283.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:54:43.632Z,1516719283.632 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:54:44.012Z,1516719284.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:44.027Z,1516719284.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:54:44.027Z,1516719284.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:44.407Z,1516719284.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:44.428Z,1516719284.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:54:44.429Z,1516719284.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:44.785Z,1516719284.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:44.816Z,1516719284.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:54:44.817Z,1516719284.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:45.188Z,1516719285.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:45.223Z,1516719285.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:54:45.224Z,1516719285.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:45.589Z,1516719285.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:45.620Z,1516719285.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:54:45.621Z,1516719285.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:45.984Z,1516719285.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:46.016Z,1516719286.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:54:46.017Z,1516719286.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:46.395Z,1516719286.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:46.422Z,1516719286.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:54:46.424Z,1516719286.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:46.799Z,1516719286.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:46.837Z,1516719286.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:54:46.838Z,1516719286.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:47.199Z,1516719287.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:47.225Z,1516719287.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:54:47.226Z,1516719287.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:47.584Z,1516719287.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:47.604Z,1516719287.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:54:47.605Z,1516719287.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:47.988Z,1516719287.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:48.024Z,1516719288.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:54:48.025Z,1516719288.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:48.392Z,1516719288.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:48.432Z,1516719288.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:54:48.433Z,1516719288.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:48.797Z,1516719288.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:48.811Z,1516719288.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:54:48.812Z,1516719288.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:49.192Z,1516719289.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:49.212Z,1516719289.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:54:49.213Z,1516719289.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:49.599Z,1516719289.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:49.614Z,1516719289.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:54:49.615Z,1516719289.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:49.999Z,1516719289.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:50.013Z,1516719290.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:54:50.014Z,1516719290.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:50.395Z,1516719290.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:50.410Z,1516719290.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:54:50.411Z,1516719290.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:50.791Z,1516719290.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:50.806Z,1516719290.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:54:50.807Z,1516719290.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:51.192Z,1516719291.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:51.206Z,1516719291.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:54:51.207Z,1516719291.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:51.590Z,1516719291.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:51.616Z,1516719291.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:54:51.617Z,1516719291.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:51.992Z,1516719291.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:52.007Z,1516719292.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:54:52.008Z,1516719292.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:52.398Z,1516719292.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:52.413Z,1516719292.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:54:52.414Z,1516719292.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:52.799Z,1516719292.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:52.814Z,1516719292.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:54:52.815Z,1516719292.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:53.198Z,1516719293.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:53.216Z,1516719293.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:54:53.217Z,1516719293.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:53.593Z,1516719293.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:53.607Z,1516719293.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:54:53.608Z,1516719293.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:53.992Z,1516719293.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:54.007Z,1516719294.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:54:54.008Z,1516719294.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:54.397Z,1516719294.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T14:54:54.412Z,1516719294.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:54:54.413Z,1516719294.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:54.808Z,1516719294.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:54:54.809Z,1516719294.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:55.206Z,1516719295.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:54:55.207Z,1516719295.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:55.616Z,1516719295.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:54:55.617Z,1516719295.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:56.017Z,1516719296.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:54:56.017Z,1516719296.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:56.417Z,1516719296.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:54:56.418Z,1516719296.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:56.808Z,1516719296.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:54:56.809Z,1516719296.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:57.207Z,1516719297.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:54:57.208Z,1516719297.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:57.609Z,1516719297.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:54:57.610Z,1516719297.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:58.009Z,1516719298.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:54:58.010Z,1516719298.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:58.418Z,1516719298.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:54:58.419Z,1516719298.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:58.821Z,1516719298.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:54:58.822Z,1516719298.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:59.224Z,1516719299.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:54:59.225Z,1516719299.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:54:59.611Z,1516719299.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:54:59.611Z,1516719299.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:00.008Z,1516719300.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:55:00.009Z,1516719300.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:00.409Z,1516719300.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:55:00.410Z,1516719300.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:00.812Z,1516719300.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:55:00.813Z,1516719300.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:01.208Z,1516719301.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:55:01.209Z,1516719301.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:01.617Z,1516719301.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:55:01.618Z,1516719301.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:02.020Z,1516719302.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:55:02.021Z,1516719302.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:02.417Z,1516719302.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:55:02.418Z,1516719302.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:02.810Z,1516719302.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:03.210Z,1516719303.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:06.306Z,1516719306.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:06.456Z,1516719306.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:06.801Z,1516719306.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:07.195Z,1516719307.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:07.574Z,1516719307.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:07.973Z,1516719307.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:08.379Z,1516719308.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:08.774Z,1516719308.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:09.181Z,1516719309.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:09.582Z,1516719309.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:09.985Z,1516719309.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:10.389Z,1516719310.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:10.780Z,1516719310.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:11.173Z,1516719311.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:11.577Z,1516719311.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:11.976Z,1516719311.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:12.385Z,1516719312.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:12.789Z,1516719312.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:13.185Z,1516719313.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:13.580Z,1516719313.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:13.980Z,1516719313.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:14.383Z,1516719314.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:14.793Z,1516719314.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:15.189Z,1516719315.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:15.581Z,1516719315.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:15.981Z,1516719315.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:16.385Z,1516719316.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:16.792Z,1516719316.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:17.185Z,1516719317.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:17.575Z,1516719317.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:17.973Z,1516719317.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:18.393Z,1516719318.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:18.793Z,1516719318.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:19.186Z,1516719319.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:19.575Z,1516719319.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:19.974Z,1516719319.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:20.383Z,1516719320.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:20.785Z,1516719320.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:21.182Z,1516719321.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:21.576Z,1516719321.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:21.975Z,1516719321.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:22.383Z,1516719322.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:22.788Z,1516719322.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:23.185Z,1516719323.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:23.573Z,1516719323.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:23.976Z,1516719323.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:24.393Z,1516719324.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:24.789Z,1516719324.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:25.182Z,1516719325.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:25.576Z,1516719325.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:25.970Z,1516719325.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:26.382Z,1516719326.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:26.786Z,1516719326.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:27.181Z,1516719327.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:27.573Z,1516719327.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:27.973Z,1516719327.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:28.381Z,1516719328.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:28.788Z,1516719328.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:29.189Z,1516719329.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:29.574Z,1516719329.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:29.976Z,1516719329.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:30.389Z,1516719330.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:30.789Z,1516719330.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:31.184Z,1516719331.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:31.576Z,1516719331.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:31.973Z,1516719331.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:32.382Z,1516719332.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:32.789Z,1516719332.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:33.181Z,1516719333.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:33.573Z,1516719333.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:33.974Z,1516719333.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:34.373Z,1516719334.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:34.782Z,1516719334.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:35.189Z,1516719335.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:35.589Z,1516719335.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:35.975Z,1516719335.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:36.381Z,1516719336.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:36.774Z,1516719336.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:37.176Z,1516719337.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:37.581Z,1516719337.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:37.993Z,1516719337.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:38.382Z,1516719338.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:38.774Z,1516719338.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:39.173Z,1516719339.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:39.586Z,1516719339.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:39.973Z,1516719339.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:40.373Z,1516719340.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:40.784Z,1516719340.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:41.185Z,1516719341.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:41.582Z,1516719341.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:41.974Z,1516719341.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:42.374Z,1516719342.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:42.778Z,1516719342.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:43.179Z,1516719343.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:43.585Z,1516719343.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:43.993Z,1516719343.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:44.389Z,1516719344.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:44.785Z,1516719344.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:45.180Z,1516719345.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:45.587Z,1516719345.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:45.965Z,1516719345.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:46.373Z,1516719346.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:46.801Z,1516719346.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:47.195Z,1516719347.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:47.599Z,1516719347.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:47.970Z,1516719347.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:48.369Z,1516719348.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:48.772Z,1516719348.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:49.173Z,1516719349.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:49.574Z,1516719349.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:49.978Z,1516719349.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:50.374Z,1516719350.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:50.769Z,1516719350.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:51.177Z,1516719351.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:51.581Z,1516719351.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:51.971Z,1516719351.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:52.373Z,1516719352.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:52.774Z,1516719352.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:53.174Z,1516719353.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:53.574Z,1516719353.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:53.972Z,1516719353.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:54.370Z,1516719354.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:54.771Z,1516719354.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:55.172Z,1516719355.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:55.581Z,1516719355.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:55.986Z,1516719355.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:56.377Z,1516719356.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:56.771Z,1516719356.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:57.180Z,1516719357.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:57.572Z,1516719357.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:57.972Z,1516719357.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:58.371Z,1516719358.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:58.784Z,1516719358.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:59.185Z,1516719359.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:59.577Z,1516719359.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:55:59.982Z,1516719359.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:00.370Z,1516719360.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:00.777Z,1516719360.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:01.171Z,1516719361.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:01.577Z,1516719361.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:01.984Z,1516719361.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:02.377Z,1516719362.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:02.770Z,1516719362.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:03.181Z,1516719363.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:03.573Z,1516719363.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:06.667Z,1516719366.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:06.793Z,1516719366.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:07.141Z,1516719367.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:07.571Z,1516719367.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:07.942Z,1516719367.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:08.334Z,1516719368.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:08.743Z,1516719368.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:09.136Z,1516719369.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:09.546Z,1516719369.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:09.948Z,1516719369.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:10.344Z,1516719370.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:10.735Z,1516719370.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:11.145Z,1516719371.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:11.530Z,1516719371.530 [PNI_TCM](ERROR): CRC does not match. Expected:0x57262 got:0x793 2018-01-23T14:56:11.576Z,1516719371.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:11.936Z,1516719371.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:12.333Z,1516719372.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:12.753Z,1516719372.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:13.153Z,1516719373.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:13.544Z,1516719373.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:13.938Z,1516719373.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:14.349Z,1516719374.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:14.744Z,1516719374.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:15.137Z,1516719375.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:15.554Z,1516719375.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:15.964Z,1516719375.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:16.360Z,1516719376.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:16.746Z,1516719376.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:17.172Z,1516719377.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:17.563Z,1516719377.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:17.962Z,1516719377.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:18.405Z,1516719378.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:18.757Z,1516719378.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:19.184Z,1516719379.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:19.568Z,1516719379.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:19.936Z,1516719379.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:20.380Z,1516719380.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:20.759Z,1516719380.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:21.141Z,1516719381.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:21.567Z,1516719381.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:21.988Z,1516719381.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:22.372Z,1516719382.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:22.809Z,1516719382.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:23.164Z,1516719383.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:23.546Z,1516719383.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:23.966Z,1516719383.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:24.355Z,1516719384.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:24.761Z,1516719384.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:25.181Z,1516719385.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:25.589Z,1516719385.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:25.962Z,1516719385.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:26.379Z,1516719386.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:26.760Z,1516719386.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:27.162Z,1516719387.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:27.561Z,1516719387.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:28.004Z,1516719388.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:28.365Z,1516719388.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:28.769Z,1516719388.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:29.188Z,1516719389.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:29.546Z,1516719389.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:29.979Z,1516719389.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:30.375Z,1516719390.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:30.769Z,1516719390.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:31.158Z,1516719391.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:31.557Z,1516719391.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:31.975Z,1516719391.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:32.358Z,1516719392.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:32.756Z,1516719392.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:33.137Z,1516719393.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:33.545Z,1516719393.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:33.954Z,1516719393.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:34.361Z,1516719394.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:34.773Z,1516719394.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:35.268Z,1516719395.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:35.562Z,1516719395.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:35.924Z,1516719395.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:36.323Z,1516719396.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:36.734Z,1516719396.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:37.164Z,1516719397.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:37.566Z,1516719397.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:37.943Z,1516719397.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:38.333Z,1516719398.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:38.743Z,1516719398.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:39.139Z,1516719399.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:39.547Z,1516719399.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:39.946Z,1516719399.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:40.345Z,1516719400.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:40.739Z,1516719400.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:41.134Z,1516719401.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:41.543Z,1516719401.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:41.945Z,1516719401.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:42.356Z,1516719402.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:42.734Z,1516719402.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:43.139Z,1516719403.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:43.588Z,1516719403.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:43.953Z,1516719403.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:44.342Z,1516719404.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:44.735Z,1516719404.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:45.141Z,1516719405.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:45.543Z,1516719405.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:45.947Z,1516719405.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:46.342Z,1516719406.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:46.739Z,1516719406.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:47.139Z,1516719407.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:47.542Z,1516719407.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:47.953Z,1516719407.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:48.351Z,1516719408.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:48.734Z,1516719408.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:49.138Z,1516719409.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:49.542Z,1516719409.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:49.945Z,1516719409.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:50.343Z,1516719410.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:50.734Z,1516719410.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:51.141Z,1516719411.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:51.546Z,1516719411.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:51.946Z,1516719411.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:52.353Z,1516719412.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:52.738Z,1516719412.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:53.140Z,1516719413.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:53.545Z,1516719413.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:53.946Z,1516719413.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:54.361Z,1516719414.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:54.740Z,1516719414.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:55.142Z,1516719415.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:55.544Z,1516719415.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:55.957Z,1516719415.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:56.349Z,1516719416.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:56.754Z,1516719416.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:57.122Z,1516719417.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:57.547Z,1516719417.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:57.959Z,1516719417.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:58.359Z,1516719418.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:58.734Z,1516719418.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:59.132Z,1516719419.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:59.534Z,1516719419.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:56:59.938Z,1516719419.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:00.340Z,1516719420.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:00.733Z,1516719420.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:01.132Z,1516719421.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:01.540Z,1516719421.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:01.942Z,1516719421.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:02.341Z,1516719422.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:02.732Z,1516719422.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:03.130Z,1516719423.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:03.549Z,1516719423.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:03.945Z,1516719423.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:07.035Z,1516719427.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:07.177Z,1516719427.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:07.529Z,1516719427.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:07.900Z,1516719427.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:08.308Z,1516719428.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:08.734Z,1516719428.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:09.106Z,1516719429.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:09.513Z,1516719429.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:09.904Z,1516719429.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:10.300Z,1516719430.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:10.699Z,1516719430.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:11.102Z,1516719431.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:11.505Z,1516719431.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:11.910Z,1516719431.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:12.306Z,1516719432.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:12.712Z,1516719432.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:13.102Z,1516719433.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:13.498Z,1516719433.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:13.900Z,1516719433.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:14.300Z,1516719434.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:14.718Z,1516719434.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:15.109Z,1516719435.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:15.515Z,1516719435.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:15.899Z,1516719435.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:16.305Z,1516719436.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:16.699Z,1516719436.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:17.101Z,1516719437.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:17.499Z,1516719437.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:17.910Z,1516719437.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:18.317Z,1516719438.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:18.720Z,1516719438.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:19.099Z,1516719439.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:19.509Z,1516719439.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:19.900Z,1516719439.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:20.301Z,1516719440.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:20.710Z,1516719440.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:21.116Z,1516719441.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:21.511Z,1516719441.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:21.907Z,1516719441.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:22.310Z,1516719442.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:22.707Z,1516719442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:23.107Z,1516719443.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:23.511Z,1516719443.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:23.913Z,1516719443.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:24.321Z,1516719444.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:24.714Z,1516719444.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:25.101Z,1516719445.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:25.505Z,1516719445.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:25.903Z,1516719445.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:26.307Z,1516719446.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:26.720Z,1516719446.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:27.114Z,1516719447.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:27.521Z,1516719447.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:27.905Z,1516719447.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:28.308Z,1516719448.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:28.701Z,1516719448.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:29.109Z,1516719449.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:29.503Z,1516719449.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:29.913Z,1516719449.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:30.314Z,1516719450.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:30.722Z,1516719450.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:31.109Z,1516719451.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:31.508Z,1516719451.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:31.909Z,1516719451.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:31.911Z,1516719451.911 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:31.911Z,1516719451.911 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 233 2018-01-23T14:57:31.911Z,1516719451.911 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T14:57:31.923Z,1516719451.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T14:57:32.304Z,1516719452.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:32.316Z,1516719452.316 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T14:57:32.316Z,1516719452.316 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 233 2018-01-23T14:57:32.725Z,1516719452.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:32.726Z,1516719452.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T14:57:32.731Z,1516719452.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:57:32.731Z,1516719452.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:57:33.115Z,1516719453.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:33.518Z,1516719453.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:33.917Z,1516719453.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:34.291Z,1516719454.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:34.694Z,1516719454.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:35.100Z,1516719455.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:35.497Z,1516719455.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:35.910Z,1516719455.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:36.313Z,1516719456.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:36.721Z,1516719456.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:37.089Z,1516719457.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:37.497Z,1516719457.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:37.896Z,1516719457.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:38.297Z,1516719458.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:38.726Z,1516719458.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:39.132Z,1516719459.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:39.508Z,1516719459.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:39.905Z,1516719459.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:40.299Z,1516719460.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:40.698Z,1516719460.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:41.100Z,1516719461.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:41.503Z,1516719461.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:41.905Z,1516719461.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:42.310Z,1516719462.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:42.706Z,1516719462.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:43.099Z,1516719463.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:43.500Z,1516719463.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:43.502Z,1516719463.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:43.502Z,1516719463.502 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 233 2018-01-23T14:57:43.502Z,1516719463.502 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T14:57:43.527Z,1516719463.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T14:57:43.901Z,1516719463.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:43.901Z,1516719463.901 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 233 2018-01-23T14:57:43.901Z,1516719463.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T14:57:43.913Z,1516719463.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T14:57:43.914Z,1516719463.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T14:57:43.914Z,1516719463.914 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 233 2018-01-23T14:57:44.301Z,1516719464.301 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T14:57:44.302Z,1516719464.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:57:44.302Z,1516719464.302 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:57:44.331Z,1516719464.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T14:57:44.331Z,1516719464.331 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 233 2018-01-23T14:57:44.709Z,1516719464.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T14:57:44.709Z,1516719464.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T14:57:44.709Z,1516719464.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T14:57:45.113Z,1516719465.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T14:57:45.114Z,1516719465.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:45.509Z,1516719465.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T14:57:45.510Z,1516719465.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:45.908Z,1516719465.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T14:57:45.909Z,1516719465.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:46.308Z,1516719466.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T14:57:46.309Z,1516719466.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:46.708Z,1516719466.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T14:57:46.709Z,1516719466.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:47.108Z,1516719467.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T14:57:47.109Z,1516719467.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:47.509Z,1516719467.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T14:57:47.510Z,1516719467.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:47.910Z,1516719467.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T14:57:47.911Z,1516719467.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:48.313Z,1516719468.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T14:57:48.314Z,1516719468.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:48.715Z,1516719468.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T14:57:48.716Z,1516719468.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:49.101Z,1516719469.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T14:57:49.107Z,1516719469.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:49.507Z,1516719469.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T14:57:49.508Z,1516719469.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:49.913Z,1516719469.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T14:57:49.914Z,1516719469.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:50.297Z,1516719470.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T14:57:50.298Z,1516719470.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:50.721Z,1516719470.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T14:57:50.722Z,1516719470.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:51.118Z,1516719471.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T14:57:51.120Z,1516719471.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:51.519Z,1516719471.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T14:57:51.520Z,1516719471.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:51.911Z,1516719471.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T14:57:51.912Z,1516719471.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:52.290Z,1516719472.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T14:57:52.311Z,1516719472.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:52.689Z,1516719472.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T14:57:52.689Z,1516719472.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:53.091Z,1516719473.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T14:57:53.092Z,1516719473.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:53.496Z,1516719473.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T14:57:53.497Z,1516719473.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:53.922Z,1516719473.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T14:57:53.923Z,1516719473.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:54.325Z,1516719474.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T14:57:54.326Z,1516719474.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:54.728Z,1516719474.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T14:57:54.729Z,1516719474.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:55.096Z,1516719475.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T14:57:55.097Z,1516719475.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:55.528Z,1516719475.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T14:57:55.529Z,1516719475.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:55.904Z,1516719475.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T14:57:55.905Z,1516719475.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:56.296Z,1516719476.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T14:57:56.297Z,1516719476.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:56.731Z,1516719476.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T14:57:56.732Z,1516719476.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:57.109Z,1516719477.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T14:57:57.110Z,1516719477.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:57.502Z,1516719477.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T14:57:57.503Z,1516719477.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:57.898Z,1516719477.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T14:57:57.899Z,1516719477.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:58.308Z,1516719478.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T14:57:58.309Z,1516719478.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:58.698Z,1516719478.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T14:57:58.699Z,1516719478.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:59.108Z,1516719479.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T14:57:59.109Z,1516719479.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:59.500Z,1516719479.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T14:57:59.501Z,1516719479.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:57:59.912Z,1516719479.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T14:57:59.913Z,1516719479.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:00.309Z,1516719480.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T14:58:00.310Z,1516719480.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:00.709Z,1516719480.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T14:58:00.710Z,1516719480.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:01.100Z,1516719481.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T14:58:01.101Z,1516719481.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:01.498Z,1516719481.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T14:58:01.499Z,1516719481.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:01.902Z,1516719481.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T14:58:01.907Z,1516719481.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:02.300Z,1516719482.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T14:58:02.301Z,1516719482.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:02.716Z,1516719482.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T14:58:02.717Z,1516719482.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:02.721Z,1516719482.721 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T14:58:02.721Z,1516719482.721 [Default:CheckIn:C.Wait] Stopped 2018-01-23T14:58:02.721Z,1516719482.721 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T14:58:02.721Z,1516719482.721 [Default:CheckIn:D] Running Loop=1 2018-01-23T14:58:03.114Z,1516719483.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T14:58:03.115Z,1516719483.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:03.118Z,1516719483.118 [Default:CheckIn:D] Stopped 2018-01-23T14:58:03.118Z,1516719483.118 [Default:CheckIn:E] Running Loop=1 2018-01-23T14:58:03.510Z,1516719483.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T14:58:03.511Z,1516719483.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:03.515Z,1516719483.515 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 700.184310 min 2018-01-23T14:58:03.515Z,1516719483.515 [Default:CheckIn:E] Stopped 2018-01-23T14:58:03.515Z,1516719483.515 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T14:58:03.515Z,1516719483.515 [Default:CheckIn] Stopped 2018-01-23T14:58:03.515Z,1516719483.515 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T14:58:03.516Z,1516719483.516 [Default:CheckIn](INFO): Running loop #69 2018-01-23T14:58:03.516Z,1516719483.516 [Default:CheckIn] Running Loop=69 2018-01-23T14:58:03.516Z,1516719483.516 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T14:58:03.516Z,1516719483.516 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T14:58:03.909Z,1516719483.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:04.308Z,1516719484.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:07.386Z,1516719487.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:07.513Z,1516719487.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:07.890Z,1516719487.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:08.294Z,1516719488.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:08.701Z,1516719488.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:09.088Z,1516719489.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:09.489Z,1516719489.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:09.889Z,1516719489.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:10.292Z,1516719490.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:10.702Z,1516719490.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:11.106Z,1516719491.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:11.501Z,1516719491.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:11.880Z,1516719491.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:12.281Z,1516719492.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:12.686Z,1516719492.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:13.086Z,1516719493.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:13.482Z,1516719493.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:13.878Z,1516719493.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:14.280Z,1516719494.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:14.682Z,1516719494.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:15.092Z,1516719495.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:15.482Z,1516719495.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:15.879Z,1516719495.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:16.278Z,1516719496.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:16.682Z,1516719496.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:17.086Z,1516719497.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:17.488Z,1516719497.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:17.881Z,1516719497.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:18.281Z,1516719498.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:18.682Z,1516719498.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:19.085Z,1516719499.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:19.483Z,1516719499.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:19.879Z,1516719499.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:20.280Z,1516719500.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:20.707Z,1516719500.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:21.090Z,1516719501.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:21.486Z,1516719501.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:21.874Z,1516719501.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:22.272Z,1516719502.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:22.690Z,1516719502.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:23.093Z,1516719503.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:23.488Z,1516719503.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:23.885Z,1516719503.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:24.279Z,1516719504.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:24.688Z,1516719504.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:25.089Z,1516719505.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:25.493Z,1516719505.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:25.883Z,1516719505.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:26.284Z,1516719506.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:26.697Z,1516719506.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:27.091Z,1516719507.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:27.490Z,1516719507.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:27.881Z,1516719507.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:28.284Z,1516719508.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:28.694Z,1516719508.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:29.097Z,1516719509.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:29.492Z,1516719509.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:29.881Z,1516719509.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:30.281Z,1516719510.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:30.689Z,1516719510.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:31.093Z,1516719511.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:31.521Z,1516719511.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:31.884Z,1516719511.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:32.284Z,1516719512.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:32.689Z,1516719512.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:33.096Z,1516719513.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:33.493Z,1516719513.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:33.882Z,1516719513.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:34.284Z,1516719514.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:34.694Z,1516719514.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:35.097Z,1516719515.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:35.492Z,1516719515.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:35.883Z,1516719515.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:36.289Z,1516719516.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:36.696Z,1516719516.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:37.101Z,1516719517.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:37.497Z,1516719517.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:37.883Z,1516719517.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:38.284Z,1516719518.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:38.689Z,1516719518.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:39.096Z,1516719519.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:39.501Z,1516719519.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:39.884Z,1516719519.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:40.284Z,1516719520.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:40.701Z,1516719520.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:41.097Z,1516719521.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:41.492Z,1516719521.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:41.885Z,1516719521.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:42.281Z,1516719522.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:42.692Z,1516719522.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:43.094Z,1516719523.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:43.497Z,1516719523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:43.884Z,1516719523.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:44.285Z,1516719524.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:44.697Z,1516719524.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:45.095Z,1516719525.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:45.493Z,1516719525.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:45.889Z,1516719525.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:46.292Z,1516719526.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:46.701Z,1516719526.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:47.094Z,1516719527.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:47.492Z,1516719527.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:47.886Z,1516719527.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:48.285Z,1516719528.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:48.695Z,1516719528.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:49.101Z,1516719529.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:49.497Z,1516719529.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:49.888Z,1516719529.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:50.286Z,1516719530.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:50.701Z,1516719530.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:51.093Z,1516719531.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:51.489Z,1516719531.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:51.887Z,1516719531.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:52.288Z,1516719532.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:52.688Z,1516719532.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:53.044Z,1516719533.044 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T14:58:53.044Z,1516719533.044 [NAL9602] Data Fault, FailCount= 4 2018-01-23T14:58:53.044Z,1516719533.044 [NAL9602](ERROR): Data Fault 2018-01-23T14:58:53.096Z,1516719533.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:53.109Z,1516719533.109 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T14:58:53.440Z,1516719533.440 [NAL9602](INFO): Powering down 2018-01-23T14:58:53.498Z,1516719533.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:53.884Z,1516719533.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:54.291Z,1516719534.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:54.304Z,1516719534.304 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T14:58:54.304Z,1516719534.304 [NAL9602] No Fault, FailCount= 4 2018-01-23T14:58:54.691Z,1516719534.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:55.084Z,1516719535.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:55.482Z,1516719535.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:55.870Z,1516719535.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:56.271Z,1516719536.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:56.670Z,1516719536.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:57.075Z,1516719537.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:57.472Z,1516719537.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:57.881Z,1516719537.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:58.279Z,1516719538.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:58.672Z,1516719538.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:59.081Z,1516719539.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:59.475Z,1516719539.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:58:59.881Z,1516719539.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:00.281Z,1516719540.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:00.678Z,1516719540.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:01.080Z,1516719541.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:01.487Z,1516719541.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:01.881Z,1516719541.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:02.277Z,1516719542.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:02.680Z,1516719542.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:03.078Z,1516719543.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:03.478Z,1516719543.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:03.885Z,1516719543.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:04.281Z,1516719544.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:04.679Z,1516719544.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:07.781Z,1516719547.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:07.890Z,1516719547.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:08.291Z,1516719548.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:08.692Z,1516719548.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:09.083Z,1516719549.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:09.492Z,1516719549.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:09.896Z,1516719549.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:10.282Z,1516719550.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:10.692Z,1516719550.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:11.089Z,1516719551.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:11.483Z,1516719551.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:11.884Z,1516719551.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:12.288Z,1516719552.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:12.684Z,1516719552.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:13.092Z,1516719553.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:13.488Z,1516719553.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:13.884Z,1516719553.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:14.285Z,1516719554.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:14.688Z,1516719554.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:15.084Z,1516719555.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:15.492Z,1516719555.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:15.897Z,1516719555.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:16.284Z,1516719556.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:16.685Z,1516719556.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:17.088Z,1516719557.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:17.485Z,1516719557.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:17.886Z,1516719557.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:18.288Z,1516719558.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:18.685Z,1516719558.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:19.085Z,1516719559.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:19.488Z,1516719559.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:19.886Z,1516719559.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:20.286Z,1516719560.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:20.697Z,1516719560.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:21.090Z,1516719561.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:21.486Z,1516719561.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:21.886Z,1516719561.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:22.287Z,1516719562.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:22.692Z,1516719562.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:23.089Z,1516719563.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:23.448Z,1516719563.448 [NAL9602](INFO): Powering up NAL9602 2018-01-23T14:59:23.500Z,1516719563.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:23.895Z,1516719563.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:24.292Z,1516719564.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:24.687Z,1516719564.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:25.100Z,1516719565.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:25.489Z,1516719565.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:25.895Z,1516719565.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:26.295Z,1516719566.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:26.688Z,1516719566.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:27.089Z,1516719567.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:27.489Z,1516719567.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:27.888Z,1516719567.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:28.288Z,1516719568.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:28.688Z,1516719568.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:29.087Z,1516719569.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:29.487Z,1516719569.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:29.896Z,1516719569.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:30.284Z,1516719570.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:30.686Z,1516719570.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:31.085Z,1516719571.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:31.487Z,1516719571.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:31.886Z,1516719571.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:32.292Z,1516719572.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:32.687Z,1516719572.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:33.091Z,1516719573.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:33.486Z,1516719573.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:33.887Z,1516719573.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:34.297Z,1516719574.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:34.656Z,1516719574.656 [NAL9602](INFO): NAL9602 initialized 2018-01-23T14:59:34.700Z,1516719574.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:35.087Z,1516719575.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:35.498Z,1516719575.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:35.898Z,1516719575.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:36.304Z,1516719576.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:36.695Z,1516719576.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:37.088Z,1516719577.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:37.492Z,1516719577.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:37.897Z,1516719577.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:38.299Z,1516719578.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:38.696Z,1516719578.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:39.098Z,1516719579.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:39.494Z,1516719579.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:39.894Z,1516719579.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:40.293Z,1516719580.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:40.693Z,1516719580.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:41.091Z,1516719581.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:41.498Z,1516719581.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:41.902Z,1516719581.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:42.296Z,1516719582.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:42.690Z,1516719582.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:43.091Z,1516719583.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:43.491Z,1516719583.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:43.888Z,1516719583.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:44.305Z,1516719584.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:44.700Z,1516719584.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:45.109Z,1516719585.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:45.497Z,1516719585.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:45.889Z,1516719585.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:46.290Z,1516719586.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:46.699Z,1516719586.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:47.086Z,1516719587.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:47.507Z,1516719587.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:47.901Z,1516719587.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:48.304Z,1516719588.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:48.701Z,1516719588.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:49.100Z,1516719589.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:49.493Z,1516719589.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:49.904Z,1516719589.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:50.305Z,1516719590.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:50.703Z,1516719590.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:51.099Z,1516719591.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:51.499Z,1516719591.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:51.894Z,1516719591.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:52.295Z,1516719592.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:52.699Z,1516719592.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:53.090Z,1516719593.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:53.506Z,1516719593.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:53.908Z,1516719593.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:54.299Z,1516719594.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:54.693Z,1516719594.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:55.098Z,1516719595.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:55.493Z,1516719595.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:55.905Z,1516719595.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:56.309Z,1516719596.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:56.704Z,1516719596.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:57.113Z,1516719597.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:57.494Z,1516719597.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:57.890Z,1516719597.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:58.292Z,1516719598.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:58.709Z,1516719598.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:59.089Z,1516719599.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x8938 got:0x15546 2018-01-23T14:59:59.109Z,1516719599.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:59.504Z,1516719599.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T14:59:59.902Z,1516719599.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:00.308Z,1516719600.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:00.697Z,1516719600.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:01.099Z,1516719601.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:01.492Z,1516719601.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:01.917Z,1516719601.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:02.298Z,1516719602.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x5215 got:0x0 2018-01-23T15:00:02.340Z,1516719602.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:02.704Z,1516719602.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:03.100Z,1516719603.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:03.501Z,1516719603.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:03.905Z,1516719603.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:04.294Z,1516719604.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:04.697Z,1516719604.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:07.787Z,1516719607.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:07.918Z,1516719607.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:08.285Z,1516719608.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:08.672Z,1516719608.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:09.053Z,1516719609.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:09.463Z,1516719609.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:09.852Z,1516719609.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:10.262Z,1516719610.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:10.670Z,1516719610.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:11.068Z,1516719611.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:11.453Z,1516719611.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:11.853Z,1516719611.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:12.264Z,1516719612.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:12.653Z,1516719612.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:13.061Z,1516719613.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:13.473Z,1516719613.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:13.869Z,1516719613.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:14.265Z,1516719614.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:14.664Z,1516719614.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:15.063Z,1516719615.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:15.452Z,1516719615.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:15.875Z,1516719615.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:16.264Z,1516719616.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:16.674Z,1516719616.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:17.073Z,1516719617.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:17.441Z,1516719617.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:17.843Z,1516719617.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:18.251Z,1516719618.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:18.652Z,1516719618.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:19.048Z,1516719619.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:19.481Z,1516719619.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:19.880Z,1516719619.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:20.278Z,1516719620.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:20.652Z,1516719620.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:21.050Z,1516719621.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:21.450Z,1516719621.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:21.872Z,1516719621.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:22.261Z,1516719622.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:22.666Z,1516719622.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:23.057Z,1516719623.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:23.450Z,1516719623.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:23.859Z,1516719623.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:24.251Z,1516719624.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:24.653Z,1516719624.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:25.061Z,1516719625.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:25.457Z,1516719625.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:25.865Z,1516719625.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:26.269Z,1516719626.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:26.653Z,1516719626.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:27.053Z,1516719627.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:27.462Z,1516719627.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:27.852Z,1516719627.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:28.261Z,1516719628.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:28.673Z,1516719628.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:29.072Z,1516719629.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:29.453Z,1516719629.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:29.859Z,1516719629.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:30.264Z,1516719630.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:30.666Z,1516719630.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:31.057Z,1516719631.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:31.462Z,1516719631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:31.865Z,1516719631.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:32.263Z,1516719632.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:32.655Z,1516719632.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:33.065Z,1516719633.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:33.071Z,1516719633.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:33.071Z,1516719633.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 234 2018-01-23T15:00:33.071Z,1516719633.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:00:33.100Z,1516719633.100 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:00:33.459Z,1516719633.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:33.472Z,1516719633.472 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:00:33.472Z,1516719633.472 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 234 2018-01-23T15:00:33.863Z,1516719633.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:33.865Z,1516719633.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:00:33.865Z,1516719633.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:00:33.865Z,1516719633.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:00:34.262Z,1516719634.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:34.677Z,1516719634.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:35.062Z,1516719635.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:35.459Z,1516719635.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:35.857Z,1516719635.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:36.270Z,1516719636.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:36.670Z,1516719636.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:37.062Z,1516719637.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:37.460Z,1516719637.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:37.861Z,1516719637.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:38.262Z,1516719638.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:38.672Z,1516719638.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:39.063Z,1516719639.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:39.460Z,1516719639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:39.862Z,1516719639.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:40.265Z,1516719640.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:40.680Z,1516719640.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:41.063Z,1516719641.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:41.462Z,1516719641.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:41.860Z,1516719641.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:42.244Z,1516719642.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:42.270Z,1516719642.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:42.655Z,1516719642.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:42.670Z,1516719642.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:43.049Z,1516719643.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:43.072Z,1516719643.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:43.429Z,1516719643.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:43.469Z,1516719643.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:43.832Z,1516719643.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:43.871Z,1516719643.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:44.240Z,1516719644.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:44.275Z,1516719644.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:44.662Z,1516719644.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:44.676Z,1516719644.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:44.678Z,1516719644.678 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:44.678Z,1516719644.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 234 2018-01-23T15:00:44.678Z,1516719644.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:00:44.690Z,1516719644.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:00:45.040Z,1516719645.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:45.079Z,1516719645.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:45.079Z,1516719645.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 234 2018-01-23T15:00:45.079Z,1516719645.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:00:45.104Z,1516719645.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:00:45.104Z,1516719645.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:00:45.104Z,1516719645.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 234 2018-01-23T15:00:45.434Z,1516719645.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:45.464Z,1516719645.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:00:45.464Z,1516719645.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:00:45.464Z,1516719645.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:00:45.484Z,1516719645.484 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:00:45.484Z,1516719645.484 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 234 2018-01-23T15:00:45.837Z,1516719645.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:45.851Z,1516719645.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:00:45.851Z,1516719645.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:00:45.852Z,1516719645.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:00:46.242Z,1516719646.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:46.257Z,1516719646.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:00:46.258Z,1516719646.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:46.644Z,1516719646.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:46.658Z,1516719646.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:00:46.659Z,1516719646.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:47.042Z,1516719647.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:47.064Z,1516719647.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:00:47.065Z,1516719647.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:47.440Z,1516719647.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:47.454Z,1516719647.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:00:47.455Z,1516719647.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:47.836Z,1516719647.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:47.851Z,1516719647.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:00:47.852Z,1516719647.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:48.243Z,1516719648.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:48.257Z,1516719648.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:00:48.258Z,1516719648.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:48.642Z,1516719648.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:48.664Z,1516719648.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:00:48.665Z,1516719648.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:49.047Z,1516719649.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:49.061Z,1516719649.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:00:49.062Z,1516719649.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:49.437Z,1516719649.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:49.465Z,1516719649.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:00:49.466Z,1516719649.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:49.832Z,1516719649.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:49.857Z,1516719649.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:00:49.858Z,1516719649.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:50.247Z,1516719650.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:50.261Z,1516719650.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:00:50.262Z,1516719650.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:50.651Z,1516719650.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:50.672Z,1516719650.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:00:50.673Z,1516719650.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:51.051Z,1516719651.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:51.072Z,1516719651.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:00:51.073Z,1516719651.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:51.430Z,1516719651.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:51.461Z,1516719651.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:00:51.462Z,1516719651.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:51.833Z,1516719651.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:51.861Z,1516719651.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:00:51.862Z,1516719651.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:52.244Z,1516719652.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:52.266Z,1516719652.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:00:52.267Z,1516719652.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:52.648Z,1516719652.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:52.670Z,1516719652.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:00:52.675Z,1516719652.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:53.049Z,1516719653.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:53.063Z,1516719653.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:00:53.064Z,1516719653.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:53.429Z,1516719653.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:53.457Z,1516719653.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:00:53.458Z,1516719653.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:53.827Z,1516719653.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:53.865Z,1516719653.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:00:53.866Z,1516719653.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:54.240Z,1516719654.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:54.276Z,1516719654.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:00:54.277Z,1516719654.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:54.648Z,1516719654.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:54.682Z,1516719654.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:00:54.687Z,1516719654.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:55.048Z,1516719655.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:55.080Z,1516719655.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:00:55.081Z,1516719655.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:55.434Z,1516719655.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:55.471Z,1516719655.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:00:55.472Z,1516719655.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:55.837Z,1516719655.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:55.872Z,1516719655.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:00:55.873Z,1516719655.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:56.258Z,1516719656.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:56.273Z,1516719656.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:00:56.274Z,1516719656.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:56.661Z,1516719656.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:56.680Z,1516719656.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:00:56.681Z,1516719656.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:57.047Z,1516719657.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:57.073Z,1516719657.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:00:57.074Z,1516719657.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:57.441Z,1516719657.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:00:57.470Z,1516719657.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:00:57.472Z,1516719657.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:57.874Z,1516719657.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:00:57.876Z,1516719657.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:58.270Z,1516719658.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:00:58.275Z,1516719658.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:58.680Z,1516719658.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:00:58.681Z,1516719658.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:59.076Z,1516719659.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:00:59.077Z,1516719659.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:59.452Z,1516719659.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:00:59.453Z,1516719659.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:00:59.850Z,1516719659.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:00:59.851Z,1516719659.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:00.256Z,1516719660.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:01:00.257Z,1516719660.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:00.679Z,1516719660.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:01:00.680Z,1516719660.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:01.066Z,1516719661.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:01:01.083Z,1516719661.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:01.452Z,1516719661.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:01:01.453Z,1516719661.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:01.855Z,1516719661.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:01:01.856Z,1516719661.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:02.260Z,1516719662.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:01:02.261Z,1516719662.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:02.664Z,1516719662.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:01:02.665Z,1516719662.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:03.058Z,1516719663.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:01:03.059Z,1516719663.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:03.453Z,1516719663.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:01:03.454Z,1516719663.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:03.851Z,1516719663.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:01:03.852Z,1516719663.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:04.260Z,1516719664.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:01:04.261Z,1516719664.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:04.658Z,1516719664.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:01:04.659Z,1516719664.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:05.059Z,1516719665.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:01:05.060Z,1516719665.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:08.161Z,1516719668.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:08.293Z,1516719668.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:08.665Z,1516719668.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:09.066Z,1516719669.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:09.465Z,1516719669.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:09.857Z,1516719669.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:10.251Z,1516719670.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:10.653Z,1516719670.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:11.055Z,1516719671.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:11.462Z,1516719671.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:11.865Z,1516719671.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:12.262Z,1516719672.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:12.660Z,1516719672.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:13.057Z,1516719673.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:13.461Z,1516719673.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:13.860Z,1516719673.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:14.261Z,1516719674.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:14.662Z,1516719674.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:15.066Z,1516719675.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:15.464Z,1516719675.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:15.829Z,1516719675.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:15.865Z,1516719675.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:16.229Z,1516719676.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:16.256Z,1516719676.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:16.631Z,1516719676.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:16.675Z,1516719676.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:17.034Z,1516719677.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:17.070Z,1516719677.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:17.456Z,1516719677.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:17.479Z,1516719677.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:17.849Z,1516719677.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:17.878Z,1516719677.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:18.249Z,1516719678.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:18.281Z,1516719678.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:18.639Z,1516719678.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:18.654Z,1516719678.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:19.074Z,1516719679.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:19.097Z,1516719679.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:19.442Z,1516719679.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:19.465Z,1516719679.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:19.845Z,1516719679.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:19.865Z,1516719679.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:20.243Z,1516719680.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:20.258Z,1516719680.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:20.665Z,1516719680.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:20.690Z,1516719680.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:21.052Z,1516719681.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:21.067Z,1516719681.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:21.454Z,1516719681.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:21.469Z,1516719681.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:21.830Z,1516719681.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:21.873Z,1516719681.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:22.230Z,1516719682.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:22.270Z,1516719682.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:22.665Z,1516719682.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:22.693Z,1516719682.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:23.034Z,1516719683.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:23.085Z,1516719683.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:23.457Z,1516719683.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:23.522Z,1516719683.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:23.869Z,1516719683.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:23.888Z,1516719683.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:24.249Z,1516719684.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:24.294Z,1516719684.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:24.635Z,1516719684.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:24.703Z,1516719684.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:25.042Z,1516719685.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:25.085Z,1516719685.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:25.442Z,1516719685.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:25.501Z,1516719685.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:25.840Z,1516719685.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:25.867Z,1516719685.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:26.230Z,1516719686.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:26.264Z,1516719686.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:26.649Z,1516719686.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:26.713Z,1516719686.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:27.054Z,1516719687.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:27.081Z,1516719687.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:27.468Z,1516719687.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:27.489Z,1516719687.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:27.834Z,1516719687.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:27.889Z,1516719687.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:28.234Z,1516719688.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:28.274Z,1516719688.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:28.635Z,1516719688.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:28.674Z,1516719688.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:29.046Z,1516719689.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:29.091Z,1516719689.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:29.457Z,1516719689.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:29.501Z,1516719689.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:29.857Z,1516719689.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:29.890Z,1516719689.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:30.249Z,1516719690.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:30.300Z,1516719690.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:30.639Z,1516719690.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:30.679Z,1516719690.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:31.040Z,1516719691.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:31.067Z,1516719691.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:31.437Z,1516719691.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:31.511Z,1516719691.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:31.831Z,1516719691.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:31.854Z,1516719691.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:32.343Z,1516719692.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:32.376Z,1516719692.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:32.645Z,1516719692.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:32.673Z,1516719692.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:33.049Z,1516719693.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:33.069Z,1516719693.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:33.446Z,1516719693.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:33.470Z,1516719693.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:33.832Z,1516719693.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:33.847Z,1516719693.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:34.250Z,1516719694.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:34.266Z,1516719694.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:34.631Z,1516719694.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:34.646Z,1516719694.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:35.030Z,1516719695.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:35.045Z,1516719695.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:35.439Z,1516719695.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:35.454Z,1516719695.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:35.843Z,1516719695.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:35.858Z,1516719695.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:36.242Z,1516719696.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:36.257Z,1516719696.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:36.630Z,1516719696.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:36.645Z,1516719696.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:37.041Z,1516719697.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:37.097Z,1516719697.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:37.429Z,1516719697.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:37.452Z,1516719697.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:37.834Z,1516719697.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:37.853Z,1516719697.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:38.229Z,1516719698.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:38.257Z,1516719698.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:38.641Z,1516719698.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:38.657Z,1516719698.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:39.043Z,1516719699.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:39.058Z,1516719699.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:39.441Z,1516719699.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:39.461Z,1516719699.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:39.836Z,1516719699.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:39.851Z,1516719699.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:40.232Z,1516719700.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:40.265Z,1516719700.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:40.641Z,1516719700.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:40.657Z,1516719700.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:41.036Z,1516719701.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:41.051Z,1516719701.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:41.442Z,1516719701.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:41.469Z,1516719701.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:41.849Z,1516719701.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:41.869Z,1516719701.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:42.247Z,1516719702.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:42.262Z,1516719702.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:42.637Z,1516719702.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:42.657Z,1516719702.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:43.032Z,1516719703.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:43.059Z,1516719703.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:43.440Z,1516719703.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:43.455Z,1516719703.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:43.829Z,1516719703.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:43.861Z,1516719703.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:44.232Z,1516719704.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:44.260Z,1516719704.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:44.648Z,1516719704.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:44.663Z,1516719704.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:45.049Z,1516719705.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:45.070Z,1516719705.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:45.447Z,1516719705.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:45.462Z,1516719705.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:45.828Z,1516719705.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:45.859Z,1516719705.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:46.229Z,1516719706.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:46.265Z,1516719706.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:46.629Z,1516719706.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:46.660Z,1516719706.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:47.032Z,1516719707.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:47.063Z,1516719707.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:47.439Z,1516719707.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:47.470Z,1516719707.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:47.851Z,1516719707.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:47.897Z,1516719707.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:48.247Z,1516719708.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:48.273Z,1516719708.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:48.641Z,1516719708.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:48.677Z,1516719708.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:49.036Z,1516719709.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:49.073Z,1516719709.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:49.436Z,1516719709.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:49.451Z,1516719709.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:49.837Z,1516719709.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:49.852Z,1516719709.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:50.233Z,1516719710.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:50.260Z,1516719710.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:50.646Z,1516719710.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:50.661Z,1516719710.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:51.046Z,1516719711.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:51.061Z,1516719711.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:51.446Z,1516719711.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:51.462Z,1516719711.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:51.836Z,1516719711.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:51.851Z,1516719711.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:52.233Z,1516719712.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:52.255Z,1516719712.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:52.636Z,1516719712.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:52.675Z,1516719712.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:53.040Z,1516719713.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:53.055Z,1516719713.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:53.447Z,1516719713.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:53.470Z,1516719713.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:53.854Z,1516719713.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:53.869Z,1516719713.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:54.245Z,1516719714.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:54.272Z,1516719714.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:54.633Z,1516719714.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:54.659Z,1516719714.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:55.028Z,1516719715.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:55.061Z,1516719715.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:55.428Z,1516719715.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:55.460Z,1516719715.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:55.834Z,1516719715.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:55.861Z,1516719715.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:56.228Z,1516719716.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:56.261Z,1516719716.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:56.653Z,1516719716.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:56.668Z,1516719716.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:57.051Z,1516719717.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:57.071Z,1516719717.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:57.439Z,1516719717.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:57.477Z,1516719717.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:57.833Z,1516719717.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:57.864Z,1516719717.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:58.230Z,1516719718.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:58.245Z,1516719718.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:58.635Z,1516719718.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:58.684Z,1516719718.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:59.034Z,1516719719.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:59.049Z,1516719719.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:59.448Z,1516719719.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:59.481Z,1516719719.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:01:59.856Z,1516719719.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:01:59.889Z,1516719719.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:00.251Z,1516719720.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:00.278Z,1516719720.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:00.641Z,1516719720.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:00.681Z,1516719720.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:01.035Z,1516719721.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:01.052Z,1516719721.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:01.433Z,1516719721.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:01.449Z,1516719721.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:01.841Z,1516719721.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:01.857Z,1516719721.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:02.234Z,1516719722.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:02.254Z,1516719722.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:02.646Z,1516719722.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:02.662Z,1516719722.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:03.046Z,1516719723.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:03.065Z,1516719723.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:03.446Z,1516719723.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:03.469Z,1516719723.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:03.836Z,1516719723.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:03.851Z,1516719723.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:04.237Z,1516719724.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:04.256Z,1516719724.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:04.632Z,1516719724.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:04.658Z,1516719724.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:05.028Z,1516719725.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:05.065Z,1516719725.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:05.452Z,1516719725.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:05.466Z,1516719725.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:08.540Z,1516719728.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:08.556Z,1516719728.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:08.672Z,1516719728.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:08.709Z,1516719728.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:09.009Z,1516719729.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:09.024Z,1516719729.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:09.417Z,1516719729.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:09.432Z,1516719729.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:09.813Z,1516719729.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:09.833Z,1516719729.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:10.209Z,1516719730.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:10.225Z,1516719730.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:10.615Z,1516719730.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:10.631Z,1516719730.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:11.019Z,1516719731.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:11.045Z,1516719731.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:11.413Z,1516719731.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:11.448Z,1516719731.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:11.800Z,1516719731.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:11.836Z,1516719731.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:12.200Z,1516719732.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:12.237Z,1516719732.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:12.601Z,1516719732.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:12.616Z,1516719732.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:13.003Z,1516719733.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:13.024Z,1516719733.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:13.411Z,1516719733.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:13.426Z,1516719733.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:13.819Z,1516719733.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:13.850Z,1516719733.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:14.215Z,1516719734.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:14.255Z,1516719734.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:14.604Z,1516719734.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:14.623Z,1516719734.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:15.005Z,1516719735.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:15.020Z,1516719735.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:15.408Z,1516719735.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:15.428Z,1516719735.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:15.810Z,1516719735.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:15.825Z,1516719735.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:16.206Z,1516719736.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:16.229Z,1516719736.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:16.611Z,1516719736.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:16.626Z,1516719736.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:17.015Z,1516719737.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:17.030Z,1516719737.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:17.411Z,1516719737.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:17.426Z,1516719737.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:17.808Z,1516719737.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:17.836Z,1516719737.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:18.200Z,1516719738.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:18.226Z,1516719738.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:18.601Z,1516719738.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:18.632Z,1516719738.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:19.001Z,1516719739.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:19.034Z,1516719739.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:19.416Z,1516719739.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:19.443Z,1516719739.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:19.827Z,1516719739.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:19.842Z,1516719739.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:20.220Z,1516719740.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:20.235Z,1516719740.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:20.600Z,1516719740.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:20.626Z,1516719740.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:21.000Z,1516719741.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:21.033Z,1516719741.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:21.401Z,1516719741.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:21.435Z,1516719741.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:21.805Z,1516719741.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:21.831Z,1516719741.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:22.199Z,1516719742.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:22.225Z,1516719742.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:22.616Z,1516719742.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:22.648Z,1516719742.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:23.027Z,1516719743.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:23.042Z,1516719743.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:23.419Z,1516719743.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:23.434Z,1516719743.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:23.801Z,1516719743.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:23.833Z,1516719743.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:24.198Z,1516719744.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:24.213Z,1516719744.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:24.601Z,1516719744.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:24.616Z,1516719744.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:25.010Z,1516719745.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:25.025Z,1516719745.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:25.415Z,1516719745.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:25.430Z,1516719745.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:25.819Z,1516719745.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:25.834Z,1516719745.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:26.212Z,1516719746.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:26.227Z,1516719746.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:26.606Z,1516719746.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:26.629Z,1516719746.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:27.012Z,1516719747.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:27.027Z,1516719747.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:27.415Z,1516719747.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:27.430Z,1516719747.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:27.815Z,1516719747.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:27.830Z,1516719747.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:28.212Z,1516719748.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:28.239Z,1516719748.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:28.608Z,1516719748.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:28.635Z,1516719748.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:29.004Z,1516719749.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:29.026Z,1516719749.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:29.419Z,1516719749.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:29.434Z,1516719749.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:29.823Z,1516719749.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:29.845Z,1516719749.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:30.218Z,1516719750.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:30.233Z,1516719750.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:30.601Z,1516719750.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:30.637Z,1516719750.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:31.001Z,1516719751.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:31.037Z,1516719751.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:31.424Z,1516719751.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:31.439Z,1516719751.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:31.820Z,1516719751.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:31.842Z,1516719751.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:32.224Z,1516719752.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:32.240Z,1516719752.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:32.601Z,1516719752.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:32.633Z,1516719752.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:33.021Z,1516719753.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:33.041Z,1516719753.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:33.432Z,1516719753.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:33.447Z,1516719753.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:33.821Z,1516719753.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:33.848Z,1516719753.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:34.226Z,1516719754.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:34.240Z,1516719754.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:34.602Z,1516719754.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:34.641Z,1516719754.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:35.009Z,1516719755.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:35.044Z,1516719755.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:35.416Z,1516719755.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:35.449Z,1516719755.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:35.816Z,1516719755.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:35.853Z,1516719755.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:36.220Z,1516719756.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:36.247Z,1516719756.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:36.610Z,1516719756.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:36.625Z,1516719756.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:37.006Z,1516719757.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:37.022Z,1516719757.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:37.416Z,1516719757.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:37.453Z,1516719757.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:37.820Z,1516719757.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:37.853Z,1516719757.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:38.216Z,1516719758.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:38.232Z,1516719758.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:38.606Z,1516719758.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:38.634Z,1516719758.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:39.009Z,1516719759.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:39.025Z,1516719759.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:39.415Z,1516719759.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:39.431Z,1516719759.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:39.815Z,1516719759.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:39.831Z,1516719759.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:40.214Z,1516719760.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:40.260Z,1516719760.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:40.613Z,1516719760.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:40.628Z,1516719760.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:41.009Z,1516719761.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:41.023Z,1516719761.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:41.414Z,1516719761.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:41.429Z,1516719761.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:41.814Z,1516719761.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:41.836Z,1516719761.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:42.218Z,1516719762.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:42.237Z,1516719762.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:42.608Z,1516719762.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:42.627Z,1516719762.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:43.009Z,1516719763.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:43.023Z,1516719763.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:43.418Z,1516719763.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:43.433Z,1516719763.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:43.818Z,1516719763.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:43.841Z,1516719763.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:44.220Z,1516719764.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:44.235Z,1516719764.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:44.608Z,1516719764.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:44.628Z,1516719764.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:45.003Z,1516719765.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:45.036Z,1516719765.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:45.420Z,1516719765.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:45.435Z,1516719765.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:45.822Z,1516719765.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:45.837Z,1516719765.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:46.222Z,1516719766.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:46.245Z,1516719766.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:46.618Z,1516719766.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:46.633Z,1516719766.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:47.002Z,1516719767.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:47.028Z,1516719767.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:47.416Z,1516719767.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:47.439Z,1516719767.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:47.824Z,1516719767.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:47.839Z,1516719767.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:48.224Z,1516719768.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:48.238Z,1516719768.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:48.602Z,1516719768.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:48.641Z,1516719768.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:49.000Z,1516719769.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:49.034Z,1516719769.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:49.421Z,1516719769.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:49.436Z,1516719769.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:49.821Z,1516719769.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:49.848Z,1516719769.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:50.221Z,1516719770.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:50.236Z,1516719770.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:50.601Z,1516719770.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:50.633Z,1516719770.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:51.000Z,1516719771.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:51.037Z,1516719771.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:51.415Z,1516719771.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:51.440Z,1516719771.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:51.821Z,1516719771.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:51.842Z,1516719771.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:52.215Z,1516719772.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:52.238Z,1516719772.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:52.601Z,1516719772.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:52.633Z,1516719772.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:53.000Z,1516719773.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:53.033Z,1516719773.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:53.423Z,1516719773.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:53.438Z,1516719773.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:53.824Z,1516719773.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:53.844Z,1516719773.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:54.223Z,1516719774.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:54.238Z,1516719774.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:54.601Z,1516719774.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:54.628Z,1516719774.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:55.000Z,1516719775.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:55.015Z,1516719775.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:55.411Z,1516719775.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:55.442Z,1516719775.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:55.835Z,1516719775.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:55.850Z,1516719775.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:56.219Z,1516719776.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:56.245Z,1516719776.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:56.609Z,1516719776.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:56.625Z,1516719776.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:57.006Z,1516719777.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:57.021Z,1516719777.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:57.423Z,1516719777.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:57.449Z,1516719777.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:57.823Z,1516719777.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:57.848Z,1516719777.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:58.224Z,1516719778.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:58.247Z,1516719778.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:58.613Z,1516719778.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:58.628Z,1516719778.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:59.006Z,1516719779.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:59.025Z,1516719779.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:59.415Z,1516719779.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:59.430Z,1516719779.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:02:59.823Z,1516719779.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:02:59.837Z,1516719779.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:00.218Z,1516719780.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:00.233Z,1516719780.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:00.616Z,1516719780.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:00.637Z,1516719780.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:01.014Z,1516719781.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:01.028Z,1516719781.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:01.419Z,1516719781.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:01.435Z,1516719781.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:01.818Z,1516719781.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:01.841Z,1516719781.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:02.219Z,1516719782.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:02.240Z,1516719782.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:02.616Z,1516719782.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:02.637Z,1516719782.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:03.013Z,1516719783.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:03.028Z,1516719783.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:03.418Z,1516719783.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:03.440Z,1516719783.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:03.819Z,1516719783.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:03.834Z,1516719783.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:03.838Z,1516719783.838 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T14:58:03.5Z 2018-01-23T15:03:03.838Z,1516719783.838 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:03:03.838Z,1516719783.838 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:03:04.218Z,1516719784.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:04.233Z,1516719784.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:04.728Z,1516719784.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:04.742Z,1516719784.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:05.001Z,1516719785.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:05.038Z,1516719785.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:08.117Z,1516719788.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:08.133Z,1516719788.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:08.211Z,1516719788.211 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0276.lzma 2018-01-23T15:03:08.243Z,1516719788.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:08.280Z,1516719788.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:08.599Z,1516719788.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:08.625Z,1516719788.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:08.966Z,1516719788.966 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0276.lzma.bak 2018-01-23T15:03:08.966Z,1516719788.966 [DataOverHttps](INFO): SBD MOMSN=7755751 2018-01-23T15:03:08.989Z,1516719788.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:09.036Z,1516719789.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:09.627Z,1516719789.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:09.644Z,1516719789.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:09.789Z,1516719789.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:09.820Z,1516719789.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:12.931Z,1516719792.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:12.947Z,1516719792.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:13.066Z,1516719793.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:13.081Z,1516719793.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:13.430Z,1516719793.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:13.453Z,1516719793.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:13.834Z,1516719793.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:13.849Z,1516719793.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:14.223Z,1516719794.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:14.244Z,1516719794.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:14.620Z,1516719794.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:14.662Z,1516719794.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:17.706Z,1516719797.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:17.741Z,1516719797.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:17.812Z,1516719797.812 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0277.lzma 2018-01-23T15:03:17.841Z,1516719797.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:17.876Z,1516719797.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:18.207Z,1516719798.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:18.246Z,1516719798.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:18.577Z,1516719798.577 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0277.lzma.bak 2018-01-23T15:03:18.578Z,1516719798.578 [DataOverHttps](INFO): SBD MOMSN=7755753 2018-01-23T15:03:18.611Z,1516719798.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:18.654Z,1516719798.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:19.248Z,1516719799.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:19.269Z,1516719799.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:19.292Z,1516719799.292 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:03:19.292Z,1516719799.292 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:03:19.292Z,1516719799.292 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:03:19.401Z,1516719799.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:19.416Z,1516719799.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:22.494Z,1516719802.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:22.509Z,1516719802.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:22.605Z,1516719802.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:22.641Z,1516719802.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:23.001Z,1516719803.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:23.021Z,1516719803.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:23.407Z,1516719803.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:23.422Z,1516719803.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:23.803Z,1516719803.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:23.818Z,1516719803.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:24.198Z,1516719804.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:24.213Z,1516719804.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:24.578Z,1516719804.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:24.609Z,1516719804.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:24.994Z,1516719804.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:25.009Z,1516719805.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:25.395Z,1516719805.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:25.413Z,1516719805.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:25.795Z,1516719805.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:25.820Z,1516719805.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:26.193Z,1516719806.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:26.230Z,1516719806.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:26.601Z,1516719806.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:26.616Z,1516719806.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:26.981Z,1516719806.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:27.021Z,1516719807.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:27.371Z,1516719807.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:27.410Z,1516719807.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:27.794Z,1516719807.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:27.809Z,1516719807.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:28.179Z,1516719808.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:28.212Z,1516719808.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:28.592Z,1516719808.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:28.639Z,1516719808.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:29.008Z,1516719809.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:29.015Z,1516719809.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x2212 got:0x20253 2018-01-23T15:03:29.052Z,1516719809.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:29.407Z,1516719809.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:29.421Z,1516719809.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:29.792Z,1516719809.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:29.807Z,1516719809.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:30.193Z,1516719810.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:30.225Z,1516719810.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:30.580Z,1516719810.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:30.612Z,1516719810.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:30.975Z,1516719810.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:31.001Z,1516719811.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:31.383Z,1516719811.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:31.420Z,1516719811.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:31.799Z,1516719811.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:31.825Z,1516719811.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:32.196Z,1516719812.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:32.207Z,1516719812.207 [PNI_TCM](ERROR): CRC does not match. Expected:0x31705 got:0x24564 2018-01-23T15:03:32.233Z,1516719812.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:32.602Z,1516719812.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:32.617Z,1516719812.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:32.997Z,1516719812.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:33.011Z,1516719813.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:33.374Z,1516719813.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:33.419Z,1516719813.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:33.781Z,1516719813.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:33.812Z,1516719813.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:34.176Z,1516719814.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:34.214Z,1516719814.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:34.216Z,1516719814.216 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:34.216Z,1516719814.216 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 235 2018-01-23T15:03:34.216Z,1516719814.216 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:03:34.228Z,1516719814.228 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:03:34.593Z,1516719814.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:34.617Z,1516719814.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:34.630Z,1516719814.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:03:34.630Z,1516719814.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 235 2018-01-23T15:03:35.007Z,1516719815.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:35.053Z,1516719815.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:35.054Z,1516719815.054 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:03:35.055Z,1516719815.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:03:35.055Z,1516719815.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:03:35.406Z,1516719815.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:35.415Z,1516719815.415 [PNI_TCM](ERROR): CRC does not match. Expected:0x16142 got:0x15544 2018-01-23T15:03:35.457Z,1516719815.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:35.774Z,1516719815.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:35.816Z,1516719815.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:36.186Z,1516719816.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:36.214Z,1516719816.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:36.577Z,1516719816.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:36.613Z,1516719816.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:36.979Z,1516719816.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:36.994Z,1516719816.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:37.396Z,1516719817.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:37.438Z,1516719817.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:37.794Z,1516719817.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:37.809Z,1516719817.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:38.183Z,1516719818.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:38.218Z,1516719818.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:38.591Z,1516719818.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:38.608Z,1516719818.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:38.979Z,1516719818.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:38.994Z,1516719818.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:39.377Z,1516719819.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:39.399Z,1516719819.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:39.779Z,1516719819.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:39.793Z,1516719819.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:40.181Z,1516719820.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:40.201Z,1516719820.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:40.591Z,1516719820.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:40.611Z,1516719820.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:40.991Z,1516719820.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:41.009Z,1516719821.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:41.388Z,1516719821.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:41.422Z,1516719821.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:41.777Z,1516719821.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:41.796Z,1516719821.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:42.180Z,1516719822.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:42.219Z,1516719822.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:42.590Z,1516719822.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:42.608Z,1516719822.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:42.990Z,1516719822.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:43.005Z,1516719823.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:43.393Z,1516719823.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:43.408Z,1516719823.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:43.796Z,1516719823.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:43.815Z,1516719823.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:44.190Z,1516719824.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:44.225Z,1516719824.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:44.599Z,1516719824.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:44.614Z,1516719824.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:44.990Z,1516719824.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:45.005Z,1516719825.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:45.380Z,1516719825.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:45.403Z,1516719825.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:45.790Z,1516719825.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:45.809Z,1516719825.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:45.810Z,1516719825.810 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:45.811Z,1516719825.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 235 2018-01-23T15:03:45.811Z,1516719825.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:03:45.839Z,1516719825.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:03:46.194Z,1516719826.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:46.209Z,1516719826.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:46.209Z,1516719826.209 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 235 2018-01-23T15:03:46.209Z,1516719826.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:03:46.222Z,1516719826.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:03:46.223Z,1516719826.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:03:46.223Z,1516719826.223 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 235 2018-01-23T15:03:46.592Z,1516719826.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:46.625Z,1516719826.625 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:03:46.626Z,1516719826.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:03:46.626Z,1516719826.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:03:46.652Z,1516719826.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:03:46.652Z,1516719826.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 235 2018-01-23T15:03:47.007Z,1516719827.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:47.024Z,1516719827.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:03:47.025Z,1516719827.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:03:47.025Z,1516719827.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:03:47.402Z,1516719827.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:47.419Z,1516719827.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:03:47.420Z,1516719827.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:47.786Z,1516719827.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:47.833Z,1516719827.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:03:47.835Z,1516719827.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:48.184Z,1516719828.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:48.198Z,1516719828.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:03:48.199Z,1516719828.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:48.587Z,1516719828.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:48.602Z,1516719828.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:03:48.603Z,1516719828.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:48.988Z,1516719828.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:49.004Z,1516719829.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:03:49.005Z,1516719829.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:49.391Z,1516719829.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:49.405Z,1516719829.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:03:49.406Z,1516719829.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:49.803Z,1516719829.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:49.839Z,1516719829.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:03:49.840Z,1516719829.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:50.196Z,1516719830.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:50.210Z,1516719830.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:03:50.211Z,1516719830.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:50.596Z,1516719830.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:50.618Z,1516719830.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:03:50.619Z,1516719830.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:50.992Z,1516719830.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:51.012Z,1516719831.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:03:51.013Z,1516719831.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:51.380Z,1516719831.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:51.412Z,1516719831.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:03:51.413Z,1516719831.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:51.778Z,1516719831.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:51.806Z,1516719831.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:03:51.808Z,1516719831.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:52.196Z,1516719832.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:52.219Z,1516719832.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:03:52.220Z,1516719832.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:52.600Z,1516719832.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:52.615Z,1516719832.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:03:52.616Z,1516719832.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:53.019Z,1516719833.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:53.053Z,1516719833.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:03:53.054Z,1516719833.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:53.402Z,1516719833.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:53.417Z,1516719833.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:03:53.418Z,1516719833.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:53.777Z,1516719833.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:53.809Z,1516719833.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:03:53.815Z,1516719833.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:54.181Z,1516719834.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:54.215Z,1516719834.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:03:54.216Z,1516719834.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:54.576Z,1516719834.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:54.609Z,1516719834.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:03:54.610Z,1516719834.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:54.981Z,1516719834.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:54.997Z,1516719834.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:03:54.998Z,1516719834.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:55.384Z,1516719835.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:55.424Z,1516719835.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:03:55.425Z,1516719835.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:55.796Z,1516719835.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:55.830Z,1516719835.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:03:55.832Z,1516719835.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:56.196Z,1516719836.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:56.231Z,1516719836.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:03:56.236Z,1516719836.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:56.600Z,1516719836.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:56.634Z,1516719836.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:03:56.635Z,1516719836.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:56.985Z,1516719836.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:56.000Z,1516719837.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:03:57.001Z,1516719837.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:57.382Z,1516719837.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:57.402Z,1516719837.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:03:57.407Z,1516719837.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:57.792Z,1516719837.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:57.813Z,1516719837.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:03:57.814Z,1516719837.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:58.184Z,1516719838.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:58.199Z,1516719838.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:03:58.200Z,1516719838.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:58.595Z,1516719838.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:58.610Z,1516719838.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:03:58.611Z,1516719838.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:58.998Z,1516719838.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:59.013Z,1516719839.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:03:59.014Z,1516719839.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:59.394Z,1516719839.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:59.420Z,1516719839.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:03:59.421Z,1516719839.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:03:59.777Z,1516719839.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:03:59.812Z,1516719839.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:03:59.813Z,1516719839.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:00.180Z,1516719840.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:00.207Z,1516719840.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:04:00.208Z,1516719840.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:00.577Z,1516719840.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:00.605Z,1516719840.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:04:00.606Z,1516719840.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:00.978Z,1516719840.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:01.005Z,1516719841.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:04:01.006Z,1516719841.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:01.381Z,1516719841.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:01.411Z,1516719841.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:04:01.412Z,1516719841.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:01.791Z,1516719841.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:01.825Z,1516719841.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:04:01.826Z,1516719841.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:02.201Z,1516719842.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:02.215Z,1516719842.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:04:02.216Z,1516719842.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:02.605Z,1516719842.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:02.624Z,1516719842.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:04:02.625Z,1516719842.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:02.976Z,1516719842.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:03.010Z,1516719843.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:04:03.011Z,1516719843.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:03.380Z,1516719843.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:03.412Z,1516719843.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:04:03.413Z,1516719843.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:03.785Z,1516719843.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:03.813Z,1516719843.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:04:03.814Z,1516719843.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:04.176Z,1516719844.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:04.211Z,1516719844.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:04:04.212Z,1516719844.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:04.601Z,1516719844.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:04.616Z,1516719844.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:04:04.617Z,1516719844.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:05.008Z,1516719845.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:05.023Z,1516719845.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:04:05.024Z,1516719845.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:05.397Z,1516719845.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:05.412Z,1516719845.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:04:05.413Z,1516719845.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:05.776Z,1516719845.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:05.809Z,1516719845.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:04:05.809Z,1516719845.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:06.184Z,1516719846.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:06.211Z,1516719846.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:06.576Z,1516719846.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:06.611Z,1516719846.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:06.981Z,1516719846.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:07.008Z,1516719847.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:07.384Z,1516719847.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:07.411Z,1516719847.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:07.795Z,1516719847.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:07.815Z,1516719847.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:08.204Z,1516719848.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:08.219Z,1516719848.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:08.604Z,1516719848.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:08.619Z,1516719848.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:08.976Z,1516719848.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:09.010Z,1516719849.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:09.376Z,1516719849.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:09.413Z,1516719849.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:09.781Z,1516719849.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:09.816Z,1516719849.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:10.180Z,1516719850.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:10.222Z,1516719850.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:10.591Z,1516719850.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:10.618Z,1516719850.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:11.007Z,1516719851.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:11.022Z,1516719851.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:11.387Z,1516719851.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:11.423Z,1516719851.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:11.780Z,1516719851.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:11.818Z,1516719851.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:12.185Z,1516719852.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:12.217Z,1516719852.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:12.576Z,1516719852.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:12.621Z,1516719852.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:12.981Z,1516719852.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:13.013Z,1516719853.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:13.380Z,1516719853.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:13.421Z,1516719853.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:13.795Z,1516719853.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:13.821Z,1516719853.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:14.199Z,1516719854.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:14.229Z,1516719854.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:14.595Z,1516719854.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:14.619Z,1516719854.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:14.982Z,1516719854.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:15.026Z,1516719855.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:15.378Z,1516719855.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:15.393Z,1516719855.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:15.785Z,1516719855.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:15.800Z,1516719855.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:16.188Z,1516719856.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:16.203Z,1516719856.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:16.595Z,1516719856.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:16.631Z,1516719856.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:16.999Z,1516719856.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:17.029Z,1516719857.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:17.391Z,1516719857.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:17.409Z,1516719857.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:17.782Z,1516719857.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:17.797Z,1516719857.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:18.187Z,1516719858.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:18.209Z,1516719858.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:18.586Z,1516719858.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:18.600Z,1516719858.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:18.986Z,1516719858.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:19.001Z,1516719859.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:19.386Z,1516719859.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:19.401Z,1516719859.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:19.788Z,1516719859.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:19.803Z,1516719859.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:22.896Z,1516719862.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:22.912Z,1516719862.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:23.040Z,1516719863.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:23.079Z,1516719863.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:23.389Z,1516719863.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:23.404Z,1516719863.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:23.791Z,1516719863.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:23.806Z,1516719863.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:24.177Z,1516719864.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:24.199Z,1516719864.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:24.603Z,1516719864.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:24.639Z,1516719864.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:24.995Z,1516719864.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:25.010Z,1516719865.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:25.395Z,1516719865.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:25.410Z,1516719865.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:25.790Z,1516719865.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:25.805Z,1516719865.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:26.190Z,1516719866.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:26.209Z,1516719866.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:26.595Z,1516719866.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:26.610Z,1516719866.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:26.995Z,1516719866.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:27.010Z,1516719867.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:27.396Z,1516719867.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:27.417Z,1516719867.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:27.774Z,1516719867.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:27.809Z,1516719867.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:28.176Z,1516719868.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:28.204Z,1516719868.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:28.600Z,1516719868.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:28.621Z,1516719868.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:28.000Z,1516719869.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:29.021Z,1516719869.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:29.399Z,1516719869.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:29.414Z,1516719869.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:29.792Z,1516719869.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:29.807Z,1516719869.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:30.174Z,1516719870.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:30.205Z,1516719870.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:30.601Z,1516719870.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:30.621Z,1516719870.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:31.005Z,1516719871.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:31.025Z,1516719871.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:31.388Z,1516719871.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:31.419Z,1516719871.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:31.783Z,1516719871.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:31.820Z,1516719871.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:32.183Z,1516719872.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:32.199Z,1516719872.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:32.233Z,1516719872.233 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:04:32.588Z,1516719872.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:32.604Z,1516719872.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:32.995Z,1516719872.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:33.030Z,1516719873.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:33.388Z,1516719873.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:33.404Z,1516719873.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:33.783Z,1516719873.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:33.798Z,1516719873.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:34.187Z,1516719874.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:34.202Z,1516719874.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:34.588Z,1516719874.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:34.603Z,1516719874.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:34.988Z,1516719874.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:35.003Z,1516719875.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:35.388Z,1516719875.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:35.404Z,1516719875.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:35.783Z,1516719875.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:35.801Z,1516719875.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:36.180Z,1516719876.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:36.200Z,1516719876.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:36.599Z,1516719876.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:36.630Z,1516719876.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:36.987Z,1516719876.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:37.002Z,1516719877.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:37.399Z,1516719877.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:37.430Z,1516719877.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:37.787Z,1516719877.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:37.802Z,1516719877.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:38.182Z,1516719878.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:38.197Z,1516719878.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:38.587Z,1516719878.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:38.603Z,1516719878.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:38.999Z,1516719878.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:39.033Z,1516719879.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:39.387Z,1516719879.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:39.409Z,1516719879.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:39.790Z,1516719879.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:39.805Z,1516719879.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:40.186Z,1516719880.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:40.202Z,1516719880.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:40.595Z,1516719880.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:40.610Z,1516719880.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:40.992Z,1516719880.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:41.007Z,1516719881.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:41.392Z,1516719881.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:41.408Z,1516719881.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:41.784Z,1516719881.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:41.798Z,1516719881.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:42.180Z,1516719882.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:42.196Z,1516719882.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:42.595Z,1516719882.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:42.617Z,1516719882.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:42.999Z,1516719882.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:43.015Z,1516719883.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:43.396Z,1516719883.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:43.411Z,1516719883.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:43.790Z,1516719883.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:43.806Z,1516719883.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:44.173Z,1516719884.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:44.209Z,1516719884.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:44.596Z,1516719884.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:44.612Z,1516719884.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:45.006Z,1516719885.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:45.029Z,1516719885.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:45.386Z,1516719885.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:45.413Z,1516719885.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:45.777Z,1516719885.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:45.812Z,1516719885.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:46.176Z,1516719886.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:46.214Z,1516719886.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:46.587Z,1516719886.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:46.622Z,1516719886.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:46.995Z,1516719886.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:47.025Z,1516719887.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:47.395Z,1516719887.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:47.425Z,1516719887.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:47.785Z,1516719887.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:47.825Z,1516719887.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:48.180Z,1516719888.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:48.217Z,1516719888.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:48.591Z,1516719888.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:48.622Z,1516719888.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:48.995Z,1516719888.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:49.028Z,1516719889.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:49.391Z,1516719889.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:49.406Z,1516719889.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:49.782Z,1516719889.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:49.797Z,1516719889.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:50.181Z,1516719890.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:50.196Z,1516719890.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:50.588Z,1516719890.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:50.603Z,1516719890.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:50.995Z,1516719890.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:51.010Z,1516719891.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:51.387Z,1516719891.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:51.412Z,1516719891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:51.785Z,1516719891.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:51.800Z,1516719891.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:52.188Z,1516719892.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:52.203Z,1516719892.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:52.591Z,1516719892.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:52.606Z,1516719892.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:52.995Z,1516719892.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:53.010Z,1516719893.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:53.392Z,1516719893.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:53.406Z,1516719893.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:53.782Z,1516719893.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:53.797Z,1516719893.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:54.185Z,1516719894.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:54.205Z,1516719894.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:54.588Z,1516719894.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:54.603Z,1516719894.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:54.991Z,1516719894.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:55.006Z,1516719895.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:55.391Z,1516719895.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:55.406Z,1516719895.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:55.792Z,1516719895.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:55.807Z,1516719895.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:56.182Z,1516719896.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:56.197Z,1516719896.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:56.589Z,1516719896.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:56.604Z,1516719896.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:56.988Z,1516719896.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:57.009Z,1516719897.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:57.389Z,1516719897.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:57.404Z,1516719897.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:57.790Z,1516719897.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:57.805Z,1516719897.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:58.195Z,1516719898.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:58.210Z,1516719898.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:58.591Z,1516719898.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:58.606Z,1516719898.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:58.989Z,1516719898.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:59.004Z,1516719899.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:59.390Z,1516719899.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:59.405Z,1516719899.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:04:59.782Z,1516719899.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:04:59.797Z,1516719899.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:00.189Z,1516719900.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:00.204Z,1516719900.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:00.588Z,1516719900.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:00.603Z,1516719900.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:00.991Z,1516719900.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:01.006Z,1516719901.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:01.395Z,1516719901.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:01.439Z,1516719901.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:01.792Z,1516719901.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:01.807Z,1516719901.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:02.182Z,1516719902.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:02.197Z,1516719902.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:02.589Z,1516719902.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:02.604Z,1516719902.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:02.988Z,1516719902.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:03.009Z,1516719903.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:03.386Z,1516719903.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:03.400Z,1516719903.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:03.790Z,1516719903.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:03.805Z,1516719903.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:04.195Z,1516719904.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:04.210Z,1516719904.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:04.591Z,1516719904.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:04.606Z,1516719904.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:04.989Z,1516719904.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:05.004Z,1516719905.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:05.389Z,1516719905.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:05.404Z,1516719905.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:05.781Z,1516719905.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:05.807Z,1516719905.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:06.189Z,1516719906.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:06.205Z,1516719906.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:06.588Z,1516719906.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:06.609Z,1516719906.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:06.991Z,1516719906.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:07.006Z,1516719907.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:07.395Z,1516719907.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:07.410Z,1516719907.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:07.791Z,1516719907.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:07.806Z,1516719907.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:08.183Z,1516719908.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:08.198Z,1516719908.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:08.589Z,1516719908.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:08.604Z,1516719908.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:08.993Z,1516719908.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:09.013Z,1516719909.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:09.388Z,1516719909.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:09.402Z,1516719909.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:09.797Z,1516719909.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:09.812Z,1516719909.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:10.196Z,1516719910.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:10.211Z,1516719910.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:10.596Z,1516719910.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:10.612Z,1516719910.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:10.989Z,1516719910.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:11.005Z,1516719911.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:11.389Z,1516719911.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:11.405Z,1516719911.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:11.784Z,1516719911.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:11.799Z,1516719911.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:12.183Z,1516719912.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:12.198Z,1516719912.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:12.590Z,1516719912.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:12.605Z,1516719912.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:12.997Z,1516719912.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:13.012Z,1516719913.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:13.392Z,1516719913.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:13.416Z,1516719913.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:13.800Z,1516719913.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:13.821Z,1516719913.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:14.188Z,1516719914.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:14.203Z,1516719914.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:14.570Z,1516719914.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:14.598Z,1516719914.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:14.990Z,1516719914.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:15.005Z,1516719915.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:15.373Z,1516719915.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:15.408Z,1516719915.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:15.796Z,1516719915.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:15.817Z,1516719915.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:16.203Z,1516719916.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:16.218Z,1516719916.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:16.593Z,1516719916.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:16.620Z,1516719916.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:16.973Z,1516719916.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:17.013Z,1516719917.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:17.376Z,1516719917.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:17.409Z,1516719917.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:17.773Z,1516719917.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:17.810Z,1516719917.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:18.172Z,1516719918.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:18.186Z,1516719918.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:18.580Z,1516719918.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:18.613Z,1516719918.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:18.987Z,1516719918.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:19.032Z,1516719919.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:19.384Z,1516719919.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:19.410Z,1516719919.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:19.804Z,1516719919.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:19.819Z,1516719919.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:20.181Z,1516719920.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:20.215Z,1516719920.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:23.276Z,1516719923.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:23.307Z,1516719923.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:23.385Z,1516719923.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:23.421Z,1516719923.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:23.771Z,1516719923.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:23.786Z,1516719923.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:24.183Z,1516719924.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:24.217Z,1516719924.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:24.583Z,1516719924.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:24.615Z,1516719924.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:24.969Z,1516719924.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:24.984Z,1516719924.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:25.368Z,1516719925.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:25.388Z,1516719925.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:25.770Z,1516719925.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:25.785Z,1516719925.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:26.168Z,1516719926.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:26.187Z,1516719926.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:26.569Z,1516719926.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:26.584Z,1516719926.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:26.972Z,1516719926.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:26.987Z,1516719926.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:27.385Z,1516719927.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:27.421Z,1516719927.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:27.778Z,1516719927.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:27.805Z,1516719927.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:28.165Z,1516719928.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:28.196Z,1516719928.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:28.561Z,1516719928.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:28.576Z,1516719928.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:28.962Z,1516719928.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:28.998Z,1516719928.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:29.373Z,1516719929.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:29.388Z,1516719929.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:29.774Z,1516719929.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:29.796Z,1516719929.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:30.179Z,1516719930.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:30.194Z,1516719930.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:30.579Z,1516719930.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:30.594Z,1516719930.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:30.968Z,1516719930.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:30.986Z,1516719930.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:31.370Z,1516719931.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:31.385Z,1516719931.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:31.774Z,1516719931.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:31.801Z,1516719931.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:32.173Z,1516719932.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:32.188Z,1516719932.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:32.569Z,1516719932.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:32.584Z,1516719932.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:32.978Z,1516719932.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:32.994Z,1516719932.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:33.378Z,1516719933.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:33.393Z,1516719933.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:33.779Z,1516719933.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:33.800Z,1516719933.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:34.174Z,1516719934.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:34.189Z,1516719934.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:34.568Z,1516719934.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:34.587Z,1516719934.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:34.971Z,1516719934.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:34.985Z,1516719934.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:35.365Z,1516719935.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:35.387Z,1516719935.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:35.774Z,1516719935.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:35.793Z,1516719935.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:36.183Z,1516719936.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:36.197Z,1516719936.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:36.579Z,1516719936.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:36.594Z,1516719936.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:36.968Z,1516719936.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:36.995Z,1516719936.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:37.374Z,1516719937.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:37.389Z,1516719937.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:37.774Z,1516719937.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:37.789Z,1516719937.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:38.162Z,1516719938.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:38.193Z,1516719938.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:38.561Z,1516719938.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:38.597Z,1516719938.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:38.986Z,1516719938.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:39.001Z,1516719939.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:39.383Z,1516719939.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:39.398Z,1516719939.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:39.777Z,1516719939.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:39.800Z,1516719939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:40.161Z,1516719940.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:40.192Z,1516719940.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:40.565Z,1516719940.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:40.597Z,1516719940.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:40.962Z,1516719940.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:40.998Z,1516719940.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:41.365Z,1516719941.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:41.397Z,1516719941.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:41.771Z,1516719941.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:41.809Z,1516719941.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:42.189Z,1516719942.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:42.204Z,1516719942.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:42.588Z,1516719942.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:42.603Z,1516719942.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:42.961Z,1516719942.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:42.976Z,1516719942.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:43.361Z,1516719943.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:43.376Z,1516719943.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:43.772Z,1516719943.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:43.807Z,1516719943.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:44.168Z,1516719944.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:44.205Z,1516719944.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:44.565Z,1516719944.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:44.580Z,1516719944.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:44.983Z,1516719944.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:45.009Z,1516719945.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:45.387Z,1516719945.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:45.417Z,1516719945.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:45.784Z,1516719945.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:45.810Z,1516719945.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:46.166Z,1516719946.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:46.189Z,1516719946.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:46.573Z,1516719946.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:46.589Z,1516719946.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:46.972Z,1516719946.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:46.987Z,1516719946.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:47.373Z,1516719947.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:47.389Z,1516719947.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:47.775Z,1516719947.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:47.791Z,1516719947.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:48.176Z,1516719948.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:48.191Z,1516719948.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:48.575Z,1516719948.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:48.590Z,1516719948.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:48.973Z,1516719948.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:48.993Z,1516719948.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:49.375Z,1516719949.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:49.390Z,1516719949.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:49.773Z,1516719949.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:49.789Z,1516719949.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:50.169Z,1516719950.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:50.185Z,1516719950.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:50.570Z,1516719950.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:50.585Z,1516719950.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:50.974Z,1516719950.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:50.990Z,1516719950.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:51.375Z,1516719951.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:51.391Z,1516719951.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:51.775Z,1516719951.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:51.796Z,1516719951.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:52.166Z,1516719952.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:52.182Z,1516719952.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:52.572Z,1516719952.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:52.587Z,1516719952.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:52.971Z,1516719952.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:52.986Z,1516719952.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:53.365Z,1516719953.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:53.385Z,1516719953.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:53.774Z,1516719953.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:53.789Z,1516719953.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:54.174Z,1516719954.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:54.189Z,1516719954.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:54.574Z,1516719954.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:54.589Z,1516719954.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:54.965Z,1516719954.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:54.987Z,1516719954.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:55.370Z,1516719955.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:55.385Z,1516719955.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:55.773Z,1516719955.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:55.788Z,1516719955.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:56.169Z,1516719956.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:56.188Z,1516719956.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:56.569Z,1516719956.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:56.585Z,1516719956.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:56.975Z,1516719956.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:56.990Z,1516719956.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:57.391Z,1516719957.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:57.422Z,1516719957.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:57.779Z,1516719957.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:57.794Z,1516719957.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:58.170Z,1516719958.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:58.185Z,1516719958.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:58.565Z,1516719958.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:58.588Z,1516719958.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:58.971Z,1516719958.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:58.986Z,1516719958.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:59.364Z,1516719959.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:59.386Z,1516719959.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:05:59.778Z,1516719959.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:05:59.801Z,1516719959.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:00.179Z,1516719960.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:00.194Z,1516719960.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:00.576Z,1516719960.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:00.603Z,1516719960.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:00.967Z,1516719960.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:00.987Z,1516719960.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:01.369Z,1516719961.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:01.388Z,1516719961.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:01.774Z,1516719961.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:01.789Z,1516719961.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:02.163Z,1516719962.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:02.197Z,1516719962.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:02.567Z,1516719962.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:02.597Z,1516719962.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:02.979Z,1516719962.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:02.994Z,1516719962.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:03.382Z,1516719963.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:03.397Z,1516719963.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:03.780Z,1516719963.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:03.795Z,1516719963.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:04.169Z,1516719964.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:04.184Z,1516719964.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:04.563Z,1516719964.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:04.596Z,1516719964.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:04.971Z,1516719964.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:04.986Z,1516719964.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:05.369Z,1516719965.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:05.385Z,1516719965.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:05.782Z,1516719965.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:05.805Z,1516719965.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:06.184Z,1516719966.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:06.199Z,1516719966.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:06.576Z,1516719966.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:06.603Z,1516719966.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:06.965Z,1516719966.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:06.991Z,1516719966.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:07.365Z,1516719967.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:07.393Z,1516719967.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:07.761Z,1516719967.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:07.793Z,1516719967.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:08.162Z,1516719968.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:08.188Z,1516719968.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:08.561Z,1516719968.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:08.600Z,1516719968.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:08.987Z,1516719968.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:09.002Z,1516719969.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:09.384Z,1516719969.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:09.398Z,1516719969.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:09.774Z,1516719969.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:09.808Z,1516719969.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:10.161Z,1516719970.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:10.193Z,1516719970.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:10.561Z,1516719970.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:10.593Z,1516719970.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:10.962Z,1516719970.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:10.998Z,1516719970.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:11.359Z,1516719971.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:11.386Z,1516719971.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:11.780Z,1516719971.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:11.795Z,1516719971.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:12.184Z,1516719972.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:12.199Z,1516719972.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:12.580Z,1516719972.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:12.595Z,1516719972.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:12.961Z,1516719972.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:12.992Z,1516719972.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:13.360Z,1516719973.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:13.399Z,1516719973.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:13.761Z,1516719973.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:13.776Z,1516719973.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:14.162Z,1516719974.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:14.181Z,1516719974.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:14.566Z,1516719974.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:14.581Z,1516719974.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:14.983Z,1516719974.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:15.013Z,1516719975.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:15.394Z,1516719975.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:15.409Z,1516719975.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:15.779Z,1516719975.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:15.805Z,1516719975.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:16.168Z,1516719976.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:16.233Z,1516719976.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:16.577Z,1516719976.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:16.592Z,1516719976.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:16.987Z,1516719976.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:17.042Z,1516719977.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:17.370Z,1516719977.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:17.406Z,1516719977.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:17.798Z,1516719977.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:17.822Z,1516719977.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:18.194Z,1516719978.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:18.267Z,1516719978.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:18.590Z,1516719978.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:18.606Z,1516719978.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:18.992Z,1516719978.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:19.021Z,1516719979.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:19.376Z,1516719979.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:19.409Z,1516719979.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:19.762Z,1516719979.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:19.777Z,1516719979.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:20.175Z,1516719980.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:20.190Z,1516719980.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:20.570Z,1516719980.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:20.585Z,1516719980.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:26.086Z,1516719986.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:26.139Z,1516719986.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:26.260Z,1516719986.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:26.345Z,1516719986.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:26.643Z,1516719986.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:26.671Z,1516719986.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:27.027Z,1516719987.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:27.078Z,1516719987.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:27.422Z,1516719987.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:27.466Z,1516719987.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:27.822Z,1516719987.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:27.886Z,1516719987.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:28.223Z,1516719988.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:28.258Z,1516719988.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:28.648Z,1516719988.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:28.671Z,1516719988.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:29.033Z,1516719989.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:29.111Z,1516719989.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:29.446Z,1516719989.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:29.466Z,1516719989.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:29.838Z,1516719989.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:29.872Z,1516719989.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:30.227Z,1516719990.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:30.274Z,1516719990.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:30.631Z,1516719990.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:30.664Z,1516719990.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:31.042Z,1516719991.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:31.078Z,1516719991.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:31.427Z,1516719991.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:31.445Z,1516719991.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:31.830Z,1516719991.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:31.874Z,1516719991.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:32.246Z,1516719992.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:32.273Z,1516719992.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:32.634Z,1516719992.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:32.693Z,1516719992.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:33.031Z,1516719993.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:33.079Z,1516719993.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:33.429Z,1516719993.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:33.453Z,1516719993.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:33.828Z,1516719993.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:33.846Z,1516719993.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:34.230Z,1516719994.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:34.262Z,1516719994.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:34.632Z,1516719994.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:34.656Z,1516719994.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:35.039Z,1516719995.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:35.100Z,1516719995.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:35.102Z,1516719995.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:35.102Z,1516719995.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 236 2018-01-23T15:06:35.102Z,1516719995.102 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:06:35.126Z,1516719995.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:06:35.444Z,1516719995.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:35.470Z,1516719995.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:35.527Z,1516719995.527 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:06:35.527Z,1516719995.527 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 236 2018-01-23T15:06:35.834Z,1516719995.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:35.881Z,1516719995.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:35.882Z,1516719995.882 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:06:35.911Z,1516719995.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:06:35.912Z,1516719995.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:06:36.222Z,1516719996.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:36.263Z,1516719996.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:36.614Z,1516719996.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:36.630Z,1516719996.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:37.029Z,1516719997.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:37.061Z,1516719997.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:37.421Z,1516719997.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:37.437Z,1516719997.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:37.831Z,1516719997.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:37.860Z,1516719997.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:38.235Z,1516719998.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:38.268Z,1516719998.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:38.631Z,1516719998.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:38.662Z,1516719998.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:39.024Z,1516719999.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:39.039Z,1516719999.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:39.424Z,1516719999.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:39.439Z,1516719999.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:39.822Z,1516719999.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:39.841Z,1516719999.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:40.228Z,1516720000.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:40.248Z,1516720000.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:40.633Z,1516720000.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:40.653Z,1516720000.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:41.040Z,1516720001.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:41.055Z,1516720001.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:41.436Z,1516720001.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:41.451Z,1516720001.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:41.832Z,1516720001.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:41.859Z,1516720001.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:42.217Z,1516720002.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:42.245Z,1516720002.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:42.614Z,1516720002.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:42.647Z,1516720002.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:43.021Z,1516720003.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:43.049Z,1516720003.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:43.415Z,1516720003.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:43.451Z,1516720003.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:43.837Z,1516720003.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:43.857Z,1516720003.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:44.238Z,1516720004.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:44.271Z,1516720004.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:44.626Z,1516720004.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:44.653Z,1516720004.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:45.016Z,1516720005.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:45.049Z,1516720005.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:45.420Z,1516720005.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:45.453Z,1516720005.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:45.816Z,1516720005.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:45.855Z,1516720005.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:46.221Z,1516720006.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:46.274Z,1516720006.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:46.616Z,1516720006.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:46.652Z,1516720006.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:46.654Z,1516720006.654 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:46.654Z,1516720006.654 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 236 2018-01-23T15:06:46.654Z,1516720006.654 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:06:46.668Z,1516720006.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:06:47.031Z,1516720007.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:47.046Z,1516720007.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:47.046Z,1516720007.046 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 236 2018-01-23T15:06:47.046Z,1516720007.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:06:47.059Z,1516720007.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:06:47.059Z,1516720007.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:06:47.059Z,1516720007.059 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 236 2018-01-23T15:06:47.427Z,1516720007.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:47.441Z,1516720007.441 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:06:47.442Z,1516720007.442 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:06:47.442Z,1516720007.442 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:06:47.454Z,1516720007.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:06:47.454Z,1516720007.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 236 2018-01-23T15:06:47.831Z,1516720007.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:47.845Z,1516720007.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:06:47.846Z,1516720007.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:06:47.846Z,1516720007.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:06:48.218Z,1516720008.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:48.232Z,1516720008.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:06:48.233Z,1516720008.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:48.614Z,1516720008.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:48.629Z,1516720008.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:06:48.630Z,1516720008.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:49.018Z,1516720009.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:49.033Z,1516720009.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:06:49.034Z,1516720009.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:49.416Z,1516720009.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:49.431Z,1516720009.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:06:49.432Z,1516720009.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:49.827Z,1516720009.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:49.842Z,1516720009.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:06:49.844Z,1516720009.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:50.231Z,1516720010.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:50.246Z,1516720010.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:06:50.247Z,1516720010.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:50.630Z,1516720010.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:50.645Z,1516720010.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:06:50.646Z,1516720010.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:51.014Z,1516720011.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:51.029Z,1516720011.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:06:51.030Z,1516720011.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:51.417Z,1516720011.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:51.432Z,1516720011.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:06:51.433Z,1516720011.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:51.818Z,1516720011.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:51.832Z,1516720011.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:06:51.833Z,1516720011.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:52.218Z,1516720012.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:52.237Z,1516720012.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:06:52.238Z,1516720012.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:52.621Z,1516720012.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:52.644Z,1516720012.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:06:52.645Z,1516720012.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:53.031Z,1516720013.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:53.065Z,1516720013.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:06:53.066Z,1516720013.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:53.431Z,1516720013.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:53.462Z,1516720013.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:06:53.467Z,1516720013.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:53.835Z,1516720013.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:53.866Z,1516720013.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:06:53.867Z,1516720013.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:54.228Z,1516720014.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:54.243Z,1516720014.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:06:54.244Z,1516720014.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:54.618Z,1516720014.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:54.633Z,1516720014.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:06:54.634Z,1516720014.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:55.022Z,1516720015.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:55.040Z,1516720015.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:06:55.041Z,1516720015.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:55.424Z,1516720015.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:55.438Z,1516720015.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:06:55.439Z,1516720015.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:55.831Z,1516720015.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:55.846Z,1516720015.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:06:55.847Z,1516720015.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:56.231Z,1516720016.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:56.246Z,1516720016.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:06:56.247Z,1516720016.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:56.627Z,1516720016.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:56.642Z,1516720016.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:06:56.643Z,1516720016.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:57.024Z,1516720017.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:57.038Z,1516720017.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:06:57.040Z,1516720017.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:57.425Z,1516720017.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:57.440Z,1516720017.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:06:57.441Z,1516720017.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:57.827Z,1516720017.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:57.842Z,1516720017.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:06:57.843Z,1516720017.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:58.227Z,1516720018.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:58.242Z,1516720018.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:06:58.243Z,1516720018.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:58.640Z,1516720018.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:58.654Z,1516720018.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:06:58.671Z,1516720018.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:59.029Z,1516720019.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:59.044Z,1516720019.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:06:59.045Z,1516720019.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:59.424Z,1516720019.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:59.439Z,1516720019.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:06:59.440Z,1516720019.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:06:59.824Z,1516720019.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:06:59.839Z,1516720019.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:06:59.840Z,1516720019.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:00.224Z,1516720020.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:00.245Z,1516720020.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:07:00.246Z,1516720020.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:00.624Z,1516720020.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:00.639Z,1516720020.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:07:00.640Z,1516720020.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:01.029Z,1516720021.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:01.045Z,1516720021.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:07:01.046Z,1516720021.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:01.432Z,1516720021.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:01.447Z,1516720021.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:07:01.448Z,1516720021.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:01.830Z,1516720021.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:01.845Z,1516720021.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:07:01.845Z,1516720021.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:02.224Z,1516720022.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:02.244Z,1516720022.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:07:02.245Z,1516720022.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:02.625Z,1516720022.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:02.648Z,1516720022.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:07:02.649Z,1516720022.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:03.024Z,1516720023.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:03.043Z,1516720023.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:07:03.044Z,1516720023.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:03.420Z,1516720023.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:03.446Z,1516720023.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:07:03.451Z,1516720023.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:03.836Z,1516720023.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:03.856Z,1516720023.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:07:03.857Z,1516720023.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:04.234Z,1516720024.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:04.249Z,1516720024.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:07:04.250Z,1516720024.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:04.634Z,1516720024.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:04.656Z,1516720024.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:07:04.657Z,1516720024.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:05.024Z,1516720025.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:05.046Z,1516720025.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:07:05.047Z,1516720025.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:05.419Z,1516720025.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:05.451Z,1516720025.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:07:05.452Z,1516720025.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:05.835Z,1516720025.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:05.856Z,1516720025.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:07:05.857Z,1516720025.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:06.239Z,1516720026.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:06.254Z,1516720026.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:07:06.255Z,1516720026.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:06.634Z,1516720026.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:06.656Z,1516720026.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:07:06.657Z,1516720026.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:07.024Z,1516720027.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:07.044Z,1516720027.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:07:07.045Z,1516720027.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:07.431Z,1516720027.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:07.446Z,1516720027.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:07.834Z,1516720027.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:07.853Z,1516720027.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:08.238Z,1516720028.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:08.254Z,1516720028.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:08.636Z,1516720028.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:08.651Z,1516720028.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:09.034Z,1516720029.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:09.049Z,1516720029.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:09.433Z,1516720029.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:09.449Z,1516720029.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:09.840Z,1516720029.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:09.856Z,1516720029.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:10.239Z,1516720030.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:10.254Z,1516720030.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:10.635Z,1516720030.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:10.657Z,1516720030.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:11.031Z,1516720031.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:11.047Z,1516720031.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:11.420Z,1516720031.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:11.451Z,1516720031.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:11.840Z,1516720031.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:11.855Z,1516720031.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:12.236Z,1516720032.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:12.279Z,1516720032.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:12.641Z,1516720032.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:12.656Z,1516720032.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:13.017Z,1516720033.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:13.052Z,1516720033.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:13.423Z,1516720033.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:13.453Z,1516720033.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:13.849Z,1516720033.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:13.864Z,1516720033.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:14.239Z,1516720034.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:14.260Z,1516720034.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:14.627Z,1516720034.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:14.665Z,1516720034.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:15.022Z,1516720035.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:15.058Z,1516720035.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:15.417Z,1516720035.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:15.456Z,1516720035.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:15.828Z,1516720035.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:15.856Z,1516720035.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:16.239Z,1516720036.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:16.266Z,1516720036.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:16.640Z,1516720036.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:16.666Z,1516720036.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:17.021Z,1516720037.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:17.037Z,1516720037.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:17.429Z,1516720037.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:17.445Z,1516720037.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:17.840Z,1516720037.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:17.870Z,1516720037.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:18.235Z,1516720038.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:18.259Z,1516720038.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:18.628Z,1516720038.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:18.643Z,1516720038.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:19.024Z,1516720039.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:19.039Z,1516720039.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:19.424Z,1516720039.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:19.439Z,1516720039.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:19.835Z,1516720039.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:19.851Z,1516720039.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:20.243Z,1516720040.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:20.258Z,1516720040.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:20.635Z,1516720040.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:20.650Z,1516720040.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:23.728Z,1516720043.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:23.748Z,1516720043.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:23.840Z,1516720043.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:23.855Z,1516720043.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:24.227Z,1516720044.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:24.243Z,1516720044.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:24.638Z,1516720044.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:24.654Z,1516720044.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:25.031Z,1516720045.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:25.047Z,1516720045.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:25.408Z,1516720045.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:25.434Z,1516720045.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:25.829Z,1516720045.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:25.844Z,1516720045.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:26.213Z,1516720046.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:26.240Z,1516720046.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:26.608Z,1516720046.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:26.634Z,1516720046.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:27.026Z,1516720047.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:27.049Z,1516720047.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:27.426Z,1516720047.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:27.445Z,1516720047.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:27.824Z,1516720047.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:27.854Z,1516720047.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:28.208Z,1516720048.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:28.237Z,1516720048.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:28.606Z,1516720048.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:28.634Z,1516720048.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:29.017Z,1516720049.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:29.043Z,1516720049.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:29.408Z,1516720049.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:29.442Z,1516720049.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:29.831Z,1516720049.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:29.846Z,1516720049.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:30.229Z,1516720050.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:30.256Z,1516720050.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:30.626Z,1516720050.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:30.653Z,1516720050.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:31.006Z,1516720051.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:31.021Z,1516720051.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:31.410Z,1516720051.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:31.425Z,1516720051.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:31.816Z,1516720051.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:31.862Z,1516720051.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:32.227Z,1516720052.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:32.254Z,1516720052.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:32.644Z,1516720052.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:32.659Z,1516720052.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:33.031Z,1516720053.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:33.064Z,1516720053.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:33.410Z,1516720053.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:33.425Z,1516720053.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:33.820Z,1516720053.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:33.855Z,1516720053.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:34.221Z,1516720054.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:34.260Z,1516720054.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:34.611Z,1516720054.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:34.626Z,1516720054.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:35.031Z,1516720055.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:35.057Z,1516720055.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:35.431Z,1516720055.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:35.457Z,1516720055.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:35.827Z,1516720055.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:35.852Z,1516720055.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:36.221Z,1516720056.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:36.252Z,1516720056.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:36.617Z,1516720056.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:36.636Z,1516720056.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:37.020Z,1516720057.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:37.061Z,1516720057.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:37.421Z,1516720057.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:37.436Z,1516720057.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:37.814Z,1516720057.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:37.838Z,1516720057.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:38.219Z,1516720058.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:38.235Z,1516720058.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:38.623Z,1516720058.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:38.638Z,1516720058.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:39.035Z,1516720059.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:39.066Z,1516720059.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:39.413Z,1516720059.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:39.428Z,1516720059.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:39.816Z,1516720059.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:39.830Z,1516720059.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:40.219Z,1516720060.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:40.235Z,1516720060.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:40.614Z,1516720060.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:40.638Z,1516720060.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:41.031Z,1516720061.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:41.046Z,1516720061.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:41.423Z,1516720061.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:41.438Z,1516720061.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:41.823Z,1516720061.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:41.845Z,1516720061.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:42.221Z,1516720062.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:42.237Z,1516720062.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:42.622Z,1516720062.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:42.637Z,1516720062.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:43.016Z,1516720063.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:43.032Z,1516720063.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:43.415Z,1516720063.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:43.442Z,1516720063.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:43.825Z,1516720063.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:43.841Z,1516720063.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:44.226Z,1516720064.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:44.245Z,1516720064.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:44.627Z,1516720064.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:44.642Z,1516720064.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:45.032Z,1516720065.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:45.047Z,1516720065.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:45.417Z,1516720065.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:45.436Z,1516720065.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:45.825Z,1516720065.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:45.840Z,1516720065.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:46.213Z,1516720066.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:46.240Z,1516720066.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:46.623Z,1516720066.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:46.657Z,1516720066.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:47.034Z,1516720067.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:47.057Z,1516720067.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:47.439Z,1516720067.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:47.461Z,1516720067.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:47.832Z,1516720067.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:47.847Z,1516720067.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:48.214Z,1516720068.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:48.244Z,1516720068.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:48.627Z,1516720068.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:48.643Z,1516720068.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:49.029Z,1516720069.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:49.049Z,1516720069.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:49.430Z,1516720069.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:49.449Z,1516720069.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:49.811Z,1516720069.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:49.849Z,1516720069.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:50.236Z,1516720070.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:50.251Z,1516720070.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:50.644Z,1516720070.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:50.659Z,1516720070.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:51.041Z,1516720071.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:51.056Z,1516720071.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:51.409Z,1516720071.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:51.440Z,1516720071.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:51.819Z,1516720071.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:51.850Z,1516720071.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:52.217Z,1516720072.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:52.233Z,1516720072.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:52.620Z,1516720072.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:52.657Z,1516720072.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:53.028Z,1516720073.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:53.072Z,1516720073.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:53.436Z,1516720073.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:53.461Z,1516720073.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:53.827Z,1516720073.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:53.851Z,1516720073.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:54.217Z,1516720074.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:54.232Z,1516720074.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:54.618Z,1516720074.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:54.640Z,1516720074.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:55.019Z,1516720075.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:55.034Z,1516720075.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:55.416Z,1516720075.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:55.443Z,1516720075.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:55.821Z,1516720075.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:55.837Z,1516720075.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:56.225Z,1516720076.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:56.241Z,1516720076.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:56.629Z,1516720076.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:56.649Z,1516720076.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:57.028Z,1516720077.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:57.044Z,1516720077.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:57.425Z,1516720077.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:57.440Z,1516720077.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:57.815Z,1516720077.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:57.853Z,1516720077.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:58.221Z,1516720078.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:58.229Z,1516720078.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x45952 got:0x13546 2018-01-23T15:07:58.250Z,1516720078.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:58.623Z,1516720078.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:58.638Z,1516720078.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:59.030Z,1516720079.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:59.053Z,1516720079.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:59.434Z,1516720079.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:59.449Z,1516720079.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:07:59.825Z,1516720079.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:07:59.849Z,1516720079.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:00.219Z,1516720080.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:00.238Z,1516720080.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:00.621Z,1516720080.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:00.640Z,1516720080.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:01.009Z,1516720081.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:01.053Z,1516720081.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:01.426Z,1516720081.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:01.438Z,1516720081.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x59119 got:0x6466 2018-01-23T15:08:01.474Z,1516720081.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:01.810Z,1516720081.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:01.849Z,1516720081.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:02.227Z,1516720082.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:02.247Z,1516720082.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:02.634Z,1516720082.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:02.649Z,1516720082.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:03.028Z,1516720083.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:03.068Z,1516720083.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:03.410Z,1516720083.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:03.439Z,1516720083.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:03.826Z,1516720083.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:03.842Z,1516720083.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:04.209Z,1516720084.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:04.273Z,1516720084.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:04.609Z,1516720084.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:04.646Z,1516720084.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:05.033Z,1516720085.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:05.053Z,1516720085.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:05.432Z,1516720085.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:05.447Z,1516720085.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:05.827Z,1516720085.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:05.881Z,1516720085.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:06.208Z,1516720086.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:06.245Z,1516720086.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:06.608Z,1516720086.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:06.647Z,1516720086.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:07.011Z,1516720087.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:07.037Z,1516720087.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:07.409Z,1516720087.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:07.444Z,1516720087.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:07.808Z,1516720087.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:07.846Z,1516720087.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:08.227Z,1516720088.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:08.249Z,1516720088.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:08.631Z,1516720088.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:08.653Z,1516720088.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:09.029Z,1516720089.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:09.057Z,1516720089.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:09.412Z,1516720089.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:09.434Z,1516720089.434 [PNI_TCM](ERROR): CRC does not match. Expected:0x37147 got:0x6210 2018-01-23T15:08:09.461Z,1516720089.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:09.808Z,1516720089.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:09.845Z,1516720089.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:10.210Z,1516720090.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:10.232Z,1516720090.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T15:08:10.249Z,1516720090.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:10.612Z,1516720090.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:10.657Z,1516720090.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:11.033Z,1516720091.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:11.049Z,1516720091.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:11.433Z,1516720091.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:11.459Z,1516720091.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:11.829Z,1516720091.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:11.845Z,1516720091.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:12.208Z,1516720092.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:12.241Z,1516720092.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:12.608Z,1516720092.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:12.646Z,1516720092.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:13.012Z,1516720093.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:13.041Z,1516720093.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:13.409Z,1516720093.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:13.450Z,1516720093.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:13.810Z,1516720093.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:13.837Z,1516720093.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:14.227Z,1516720094.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:14.246Z,1516720094.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:14.629Z,1516720094.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:14.652Z,1516720094.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:15.031Z,1516720095.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:15.046Z,1516720095.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:15.409Z,1516720095.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:15.441Z,1516720095.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:15.812Z,1516720095.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:15.850Z,1516720095.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:16.213Z,1516720096.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:16.249Z,1516720096.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:16.612Z,1516720096.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:16.644Z,1516720096.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:17.019Z,1516720097.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:17.046Z,1516720097.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:17.432Z,1516720097.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:17.451Z,1516720097.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:17.819Z,1516720097.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:17.857Z,1516720097.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:18.208Z,1516720098.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:18.246Z,1516720098.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:18.608Z,1516720098.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:18.623Z,1516720098.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:19.016Z,1516720099.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:19.057Z,1516720099.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:19.417Z,1516720099.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:19.434Z,1516720099.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:19.438Z,1516720099.438 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:08:19.455Z,1516720099.455 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:08:19.455Z,1516720099.455 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:08:19.455Z,1516720099.455 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:08:19.816Z,1516720099.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:19.835Z,1516720099.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:19.838Z,1516720099.838 [Default:CheckIn:D] Stopped 2018-01-23T15:08:19.838Z,1516720099.838 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:08:20.219Z,1516720100.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:20.235Z,1516720100.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:20.238Z,1516720100.238 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.462956 min 2018-01-23T15:08:20.238Z,1516720100.238 [Default:CheckIn:E] Stopped 2018-01-23T15:08:20.238Z,1516720100.238 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn] Stopped 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn](INFO): Running loop #70 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn] Running Loop=70 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:08:20.239Z,1516720100.239 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:08:20.623Z,1516720100.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:20.638Z,1516720100.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:21.024Z,1516720101.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:21.043Z,1516720101.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:24.112Z,1516720104.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:24.133Z,1516720104.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:24.225Z,1516720104.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:24.292Z,1516720104.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:24.623Z,1516720104.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:24.642Z,1516720104.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:25.023Z,1516720105.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:25.038Z,1516720105.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:25.423Z,1516720105.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:25.438Z,1516720105.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:25.814Z,1516720105.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:25.829Z,1516720105.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:26.212Z,1516720106.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:26.233Z,1516720106.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:26.613Z,1516720106.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:26.628Z,1516720106.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:27.024Z,1516720107.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:27.039Z,1516720107.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:27.427Z,1516720107.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:27.442Z,1516720107.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:27.822Z,1516720107.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:27.840Z,1516720107.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:28.214Z,1516720108.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:28.229Z,1516720108.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:28.613Z,1516720108.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:28.629Z,1516720108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:29.008Z,1516720109.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:29.035Z,1516720109.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:29.416Z,1516720109.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:29.431Z,1516720109.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:29.808Z,1516720109.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:29.841Z,1516720109.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:30.228Z,1516720110.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:30.242Z,1516720110.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:30.629Z,1516720110.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:30.644Z,1516720110.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:31.028Z,1516720111.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:31.046Z,1516720111.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:31.421Z,1516720111.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:31.437Z,1516720111.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:31.805Z,1516720111.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:31.843Z,1516720111.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:32.206Z,1516720112.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:32.233Z,1516720112.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:32.605Z,1516720112.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:32.637Z,1516720112.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:33.029Z,1516720113.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:33.045Z,1516720113.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:33.420Z,1516720113.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:33.447Z,1516720113.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:33.820Z,1516720113.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:33.843Z,1516720113.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:34.204Z,1516720114.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:34.240Z,1516720114.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:34.602Z,1516720114.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:34.629Z,1516720114.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:35.004Z,1516720115.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:35.042Z,1516720115.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:35.405Z,1516720115.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:35.444Z,1516720115.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:35.802Z,1516720115.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:35.817Z,1516720115.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:36.215Z,1516720116.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:36.242Z,1516720116.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:36.619Z,1516720116.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:36.656Z,1516720116.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:37.015Z,1516720117.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:37.041Z,1516720117.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:37.408Z,1516720117.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:37.445Z,1516720117.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:37.805Z,1516720117.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:37.850Z,1516720117.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:38.210Z,1516720118.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:38.241Z,1516720118.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:38.605Z,1516720118.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:38.625Z,1516720118.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:39.022Z,1516720119.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:39.057Z,1516720119.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:39.420Z,1516720119.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:39.458Z,1516720119.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:39.827Z,1516720119.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:39.854Z,1516720119.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:40.208Z,1516720120.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:40.224Z,1516720120.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:40.605Z,1516720120.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:40.621Z,1516720120.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:41.009Z,1516720121.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:41.032Z,1516720121.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:41.414Z,1516720121.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:41.430Z,1516720121.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:41.810Z,1516720121.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:41.834Z,1516720121.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:42.215Z,1516720122.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:42.231Z,1516720122.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:42.619Z,1516720122.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:42.634Z,1516720122.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:43.027Z,1516720123.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:43.063Z,1516720123.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:43.416Z,1516720123.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:43.431Z,1516720123.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:43.813Z,1516720123.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:43.828Z,1516720123.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:44.209Z,1516720124.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:44.240Z,1516720124.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:44.616Z,1516720124.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:44.631Z,1516720124.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:45.022Z,1516720125.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:45.044Z,1516720125.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:45.422Z,1516720125.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:45.438Z,1516720125.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:45.822Z,1516720125.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:45.837Z,1516720125.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:46.211Z,1516720126.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:46.240Z,1516720126.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:46.602Z,1516720126.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:46.634Z,1516720126.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:47.004Z,1516720127.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:47.041Z,1516720127.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:47.405Z,1516720127.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:47.432Z,1516720127.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:47.804Z,1516720127.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:47.831Z,1516720127.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:48.222Z,1516720128.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:48.245Z,1516720128.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:48.627Z,1516720128.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:48.642Z,1516720128.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:49.023Z,1516720129.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:49.038Z,1516720129.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:49.404Z,1516720129.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:49.436Z,1516720129.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:49.804Z,1516720129.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:49.833Z,1516720129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:50.205Z,1516720130.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:50.231Z,1516720130.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:50.604Z,1516720130.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:50.637Z,1516720130.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:51.022Z,1516720131.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:51.043Z,1516720131.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:51.420Z,1516720131.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:51.450Z,1516720131.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:51.823Z,1516720131.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:51.838Z,1516720131.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:52.204Z,1516720132.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:52.240Z,1516720132.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:52.602Z,1516720132.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:52.636Z,1516720132.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:53.020Z,1516720133.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:53.038Z,1516720133.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:53.405Z,1516720133.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:53.433Z,1516720133.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:53.805Z,1516720133.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:53.831Z,1516720133.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:54.220Z,1516720134.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:54.250Z,1516720134.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:54.627Z,1516720134.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:54.642Z,1516720134.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:55.023Z,1516720135.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:55.038Z,1516720135.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:55.404Z,1516720135.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:55.437Z,1516720135.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:55.804Z,1516720135.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:55.833Z,1516720135.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:56.205Z,1516720136.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:56.236Z,1516720136.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:56.608Z,1516720136.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:56.641Z,1516720136.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:57.022Z,1516720137.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:57.043Z,1516720137.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:57.422Z,1516720137.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:57.445Z,1516720137.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:57.823Z,1516720137.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:57.838Z,1516720137.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:58.205Z,1516720138.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:58.244Z,1516720138.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:58.602Z,1516720138.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:58.629Z,1516720138.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:59.027Z,1516720139.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:59.042Z,1516720139.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:59.428Z,1516720139.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:59.442Z,1516720139.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:08:59.823Z,1516720139.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:08:59.838Z,1516720139.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:00.205Z,1516720140.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:00.237Z,1516720140.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:00.604Z,1516720140.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:00.642Z,1516720140.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:01.028Z,1516720141.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:01.043Z,1516720141.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:01.424Z,1516720141.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:01.446Z,1516720141.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:01.814Z,1516720141.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:01.841Z,1516720141.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:02.205Z,1516720142.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:02.236Z,1516720142.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:02.608Z,1516720142.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:02.644Z,1516720142.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:03.032Z,1516720143.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:03.047Z,1516720143.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:03.415Z,1516720143.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:03.441Z,1516720143.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:03.815Z,1516720143.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:03.841Z,1516720143.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:04.205Z,1516720144.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:04.249Z,1516720144.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:04.608Z,1516720144.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:04.623Z,1516720144.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:05.027Z,1516720145.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:05.054Z,1516720145.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:05.423Z,1516720145.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:05.451Z,1516720145.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:05.823Z,1516720145.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:05.850Z,1516720145.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:06.218Z,1516720146.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:06.249Z,1516720146.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:06.610Z,1516720146.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:06.625Z,1516720146.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:07.024Z,1516720147.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:07.047Z,1516720147.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:07.419Z,1516720147.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:07.434Z,1516720147.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:07.827Z,1516720147.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:07.842Z,1516720147.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:08.216Z,1516720148.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:08.232Z,1516720148.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:08.610Z,1516720148.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:08.638Z,1516720148.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:09.023Z,1516720149.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:09.038Z,1516720149.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:09.418Z,1516720149.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:09.438Z,1516720149.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:09.823Z,1516720149.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:09.838Z,1516720149.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:10.214Z,1516720150.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:10.229Z,1516720150.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:10.602Z,1516720150.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:10.634Z,1516720150.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:11.027Z,1516720151.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:11.042Z,1516720151.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:11.428Z,1516720151.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:11.443Z,1516720151.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:11.825Z,1516720151.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:11.845Z,1516720151.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:12.218Z,1516720152.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:12.233Z,1516720152.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:12.605Z,1516720152.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:12.647Z,1516720152.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:13.029Z,1516720153.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:13.049Z,1516720153.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:13.431Z,1516720153.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:13.453Z,1516720153.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:13.829Z,1516720153.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:13.844Z,1516720153.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:14.220Z,1516720154.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:14.235Z,1516720154.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:14.612Z,1516720154.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:14.635Z,1516720154.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:15.025Z,1516720155.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:15.040Z,1516720155.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:15.426Z,1516720155.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:15.442Z,1516720155.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:15.820Z,1516720155.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:15.847Z,1516720155.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:16.206Z,1516720156.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:16.243Z,1516720156.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:16.602Z,1516720156.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:16.626Z,1516720156.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:17.016Z,1516720157.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:17.053Z,1516720157.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:17.429Z,1516720157.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:17.444Z,1516720157.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:17.815Z,1516720157.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:17.849Z,1516720157.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:18.205Z,1516720158.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:18.232Z,1516720158.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:18.608Z,1516720158.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:18.647Z,1516720158.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:19.023Z,1516720159.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:19.049Z,1516720159.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:19.439Z,1516720159.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:19.454Z,1516720159.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:19.826Z,1516720159.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:19.853Z,1516720159.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:20.213Z,1516720160.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:20.228Z,1516720160.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:20.612Z,1516720160.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:20.633Z,1516720160.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:21.023Z,1516720161.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:21.059Z,1516720161.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:21.420Z,1516720161.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:21.455Z,1516720161.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:24.527Z,1516720164.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:24.553Z,1516720164.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:24.654Z,1516720164.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:24.694Z,1516720164.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:24.000Z,1516720165.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:25.023Z,1516720165.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:25.411Z,1516720165.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:25.425Z,1516720165.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:25.800Z,1516720165.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:25.833Z,1516720165.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:26.214Z,1516720166.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:26.229Z,1516720166.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:26.615Z,1516720166.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:26.629Z,1516720166.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:27.014Z,1516720167.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:27.029Z,1516720167.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:27.404Z,1516720167.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:27.419Z,1516720167.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:27.805Z,1516720167.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:27.820Z,1516720167.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:28.205Z,1516720168.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:28.220Z,1516720168.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:28.601Z,1516720168.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:28.624Z,1516720168.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:29.009Z,1516720169.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:29.023Z,1516720169.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:29.418Z,1516720169.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:29.433Z,1516720169.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:29.817Z,1516720169.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:29.837Z,1516720169.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:30.219Z,1516720170.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:30.233Z,1516720170.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:30.608Z,1516720170.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:30.623Z,1516720170.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:30.000Z,1516720171.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:31.022Z,1516720171.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:31.401Z,1516720171.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:31.429Z,1516720171.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:31.804Z,1516720171.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:31.830Z,1516720171.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:32.215Z,1516720172.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:32.230Z,1516720172.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:32.619Z,1516720172.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:32.634Z,1516720172.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:33.012Z,1516720173.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:33.034Z,1516720173.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:33.396Z,1516720173.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:33.429Z,1516720173.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:33.800Z,1516720173.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:33.834Z,1516720173.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:34.201Z,1516720174.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:34.232Z,1516720174.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:34.597Z,1516720174.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:34.624Z,1516720174.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:34.996Z,1516720174.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:35.011Z,1516720175.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:35.407Z,1516720175.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:35.439Z,1516720175.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:35.788Z,1516720175.788 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T15:09:35.788Z,1516720175.788 [NAL9602] Data Fault, FailCount= 5 2018-01-23T15:09:35.788Z,1516720175.788 [NAL9602](ERROR): Data Fault 2018-01-23T15:09:35.805Z,1516720175.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:35.849Z,1516720175.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:35.870Z,1516720175.870 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T15:09:35.871Z,1516720175.871 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T15:09:36.192Z,1516720176.192 [NAL9602](INFO): Powering down 2018-01-23T15:09:36.209Z,1516720176.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:36.224Z,1516720176.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:36.226Z,1516720176.226 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:36.226Z,1516720176.226 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 237 2018-01-23T15:09:36.226Z,1516720176.226 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:09:36.264Z,1516720176.264 [CBIT](INFO): Critical error at 20180123T150935 2018-01-23T15:09:36.266Z,1516720176.266 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:09:36.602Z,1516720176.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:36.621Z,1516720176.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:36.641Z,1516720176.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:09:36.641Z,1516720176.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 237 2018-01-23T15:09:37.001Z,1516720177.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:37.024Z,1516720177.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:37.028Z,1516720177.028 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:09:37.028Z,1516720177.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:09:37.029Z,1516720177.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:09:37.403Z,1516720177.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:37.418Z,1516720177.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:37.802Z,1516720177.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:37.822Z,1516720177.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:38.198Z,1516720178.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:38.230Z,1516720178.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:38.600Z,1516720178.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:38.615Z,1516720178.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:39.000Z,1516720179.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:39.032Z,1516720179.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:39.408Z,1516720179.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:39.423Z,1516720179.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:39.803Z,1516720179.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:39.827Z,1516720179.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:40.200Z,1516720180.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:40.222Z,1516720180.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:40.599Z,1516720180.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:40.621Z,1516720180.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:41.007Z,1516720181.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:41.022Z,1516720181.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:41.400Z,1516720181.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:41.422Z,1516720181.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:41.812Z,1516720181.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:41.827Z,1516720181.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:42.203Z,1516720182.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:42.224Z,1516720182.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:42.600Z,1516720182.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:42.622Z,1516720182.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:43.012Z,1516720183.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:43.027Z,1516720183.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:43.404Z,1516720183.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:43.420Z,1516720183.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:43.805Z,1516720183.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:43.825Z,1516720183.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:44.203Z,1516720184.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:44.222Z,1516720184.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:44.604Z,1516720184.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:44.624Z,1516720184.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:44.000Z,1516720185.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:45.031Z,1516720185.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:45.399Z,1516720185.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:45.423Z,1516720185.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:45.805Z,1516720185.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:45.828Z,1516720185.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:46.200Z,1516720186.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:46.224Z,1516720186.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:46.599Z,1516720186.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:46.623Z,1516720186.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:47.004Z,1516720187.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:47.025Z,1516720187.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:47.404Z,1516720187.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:47.419Z,1516720187.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:47.815Z,1516720187.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:47.831Z,1516720187.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:47.832Z,1516720187.832 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:47.832Z,1516720187.832 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 237 2018-01-23T15:09:47.832Z,1516720187.832 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:09:47.845Z,1516720187.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:09:48.196Z,1516720188.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:48.233Z,1516720188.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:48.233Z,1516720188.233 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 237 2018-01-23T15:09:48.233Z,1516720188.233 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:09:48.245Z,1516720188.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:09:48.246Z,1516720188.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:09:48.246Z,1516720188.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 237 2018-01-23T15:09:48.594Z,1516720188.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:48.628Z,1516720188.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:09:48.628Z,1516720188.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:09:48.629Z,1516720188.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:09:48.641Z,1516720188.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:09:48.642Z,1516720188.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 237 2018-01-23T15:09:48.997Z,1516720188.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:49.027Z,1516720189.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:09:49.028Z,1516720189.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:09:49.028Z,1516720189.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:09:49.396Z,1516720189.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:49.430Z,1516720189.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:09:49.431Z,1516720189.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:49.796Z,1516720189.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:49.822Z,1516720189.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:09:49.823Z,1516720189.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:50.196Z,1516720190.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:50.228Z,1516720190.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:09:50.229Z,1516720190.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:50.596Z,1516720190.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:50.632Z,1516720190.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:09:50.633Z,1516720190.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:50.996Z,1516720190.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:51.021Z,1516720191.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:09:51.022Z,1516720191.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:51.396Z,1516720191.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:51.428Z,1516720191.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:09:51.429Z,1516720191.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:51.800Z,1516720191.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:51.814Z,1516720191.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:09:51.815Z,1516720191.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:52.197Z,1516720192.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:52.212Z,1516720192.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:09:52.213Z,1516720192.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:52.610Z,1516720192.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:52.625Z,1516720192.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:09:52.625Z,1516720192.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:53.004Z,1516720193.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:53.018Z,1516720193.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:09:53.019Z,1516720193.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:53.404Z,1516720193.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:53.419Z,1516720193.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:09:53.420Z,1516720193.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:53.801Z,1516720193.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:53.828Z,1516720193.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:09:53.829Z,1516720193.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:54.205Z,1516720194.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:54.219Z,1516720194.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:09:54.220Z,1516720194.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:54.605Z,1516720194.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:54.620Z,1516720194.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:09:54.620Z,1516720194.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:55.000Z,1516720195.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:55.023Z,1516720195.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:09:55.024Z,1516720195.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:55.404Z,1516720195.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:55.419Z,1516720195.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:09:55.419Z,1516720195.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:55.804Z,1516720195.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:55.819Z,1516720195.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:09:55.820Z,1516720195.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:56.200Z,1516720196.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:56.226Z,1516720196.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:09:56.231Z,1516720196.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:56.603Z,1516720196.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:56.618Z,1516720196.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:09:56.619Z,1516720196.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:57.007Z,1516720197.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:57.022Z,1516720197.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:09:57.023Z,1516720197.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:57.399Z,1516720197.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:57.422Z,1516720197.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:09:57.423Z,1516720197.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:57.804Z,1516720197.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:57.825Z,1516720197.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:09:57.826Z,1516720197.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:58.193Z,1516720198.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:58.218Z,1516720198.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:09:58.220Z,1516720198.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:58.599Z,1516720198.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:58.621Z,1516720198.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:09:58.622Z,1516720198.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:59.003Z,1516720199.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:59.024Z,1516720199.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:09:59.025Z,1516720199.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:59.393Z,1516720199.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:59.419Z,1516720199.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:09:59.420Z,1516720199.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:09:59.799Z,1516720199.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:09:59.830Z,1516720199.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:09:59.831Z,1516720199.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:00.211Z,1516720200.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:00.232Z,1516720200.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:10:00.233Z,1516720200.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:00.593Z,1516720200.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:00.624Z,1516720200.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:10:00.625Z,1516720200.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:01.008Z,1516720201.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:01.022Z,1516720201.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:10:01.023Z,1516720201.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:01.396Z,1516720201.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:01.441Z,1516720201.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:10:01.442Z,1516720201.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:01.807Z,1516720201.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:01.822Z,1516720201.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:10:01.823Z,1516720201.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:02.196Z,1516720202.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:02.223Z,1516720202.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:10:02.224Z,1516720202.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:02.600Z,1516720202.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:02.625Z,1516720202.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:10:02.626Z,1516720202.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:02.000Z,1516720203.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:03.025Z,1516720203.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:10:03.026Z,1516720203.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:03.396Z,1516720203.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:03.428Z,1516720203.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:10:03.429Z,1516720203.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:03.796Z,1516720203.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:03.832Z,1516720203.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:10:03.833Z,1516720203.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:04.193Z,1516720204.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:04.216Z,1516720204.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:10:04.217Z,1516720204.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:04.596Z,1516720204.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:04.623Z,1516720204.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:10:04.624Z,1516720204.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:04.996Z,1516720204.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:05.010Z,1516720205.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:10:05.011Z,1516720205.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:05.393Z,1516720205.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:05.408Z,1516720205.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:10:05.409Z,1516720205.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:05.808Z,1516720205.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:05.822Z,1516720205.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:10:05.840Z,1516720205.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:06.204Z,1516720206.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:06.218Z,1516720206.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:10:06.219Z,1516720206.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:06.600Z,1516720206.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:06.615Z,1516720206.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:10:06.616Z,1516720206.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:06.998Z,1516720206.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:07.029Z,1516720207.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:10:07.030Z,1516720207.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:07.402Z,1516720207.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:07.417Z,1516720207.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:10:07.418Z,1516720207.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:07.803Z,1516720207.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:07.817Z,1516720207.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:10:07.818Z,1516720207.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:08.200Z,1516720208.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:08.223Z,1516720208.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:10:08.224Z,1516720208.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:08.606Z,1516720208.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:08.621Z,1516720208.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:09.007Z,1516720209.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:09.022Z,1516720209.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:09.400Z,1516720209.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:09.423Z,1516720209.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:09.803Z,1516720209.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:09.824Z,1516720209.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:10.201Z,1516720210.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:10.216Z,1516720210.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:10.598Z,1516720210.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:10.630Z,1516720210.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:11.003Z,1516720211.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:11.018Z,1516720211.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:11.400Z,1516720211.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:11.419Z,1516720211.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:11.798Z,1516720211.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:11.838Z,1516720211.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:12.203Z,1516720212.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:12.218Z,1516720212.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:12.593Z,1516720212.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:12.625Z,1516720212.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:12.999Z,1516720212.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:13.031Z,1516720213.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:13.407Z,1516720213.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:13.422Z,1516720213.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:13.807Z,1516720213.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:13.822Z,1516720213.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:14.199Z,1516720214.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:14.222Z,1516720214.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:14.604Z,1516720214.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:14.624Z,1516720214.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:15.007Z,1516720215.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:15.022Z,1516720215.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:15.399Z,1516720215.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:15.430Z,1516720215.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:15.803Z,1516720215.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:15.818Z,1516720215.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:16.193Z,1516720216.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:16.220Z,1516720216.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:16.599Z,1516720216.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:16.630Z,1516720216.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:17.003Z,1516720217.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:17.018Z,1516720217.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:17.393Z,1516720217.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:17.420Z,1516720217.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:17.799Z,1516720217.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:17.831Z,1516720217.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:18.203Z,1516720218.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:18.218Z,1516720218.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:18.593Z,1516720218.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:18.621Z,1516720218.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:18.996Z,1516720218.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:19.023Z,1516720219.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:19.396Z,1516720219.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:19.431Z,1516720219.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:19.796Z,1516720219.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:19.829Z,1516720219.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:20.196Z,1516720220.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:20.223Z,1516720220.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:20.596Z,1516720220.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:20.631Z,1516720220.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:20.998Z,1516720220.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:21.024Z,1516720221.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:21.397Z,1516720221.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:21.429Z,1516720221.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:21.797Z,1516720221.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:21.824Z,1516720221.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:24.889Z,1516720224.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:24.917Z,1516720224.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:25.008Z,1516720225.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:25.041Z,1516720225.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:25.374Z,1516720225.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:25.393Z,1516720225.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:25.773Z,1516720225.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:25.788Z,1516720225.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:26.169Z,1516720226.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:26.185Z,1516720226.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:26.564Z,1516720226.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:26.596Z,1516720226.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:26.968Z,1516720226.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:26.984Z,1516720226.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:27.371Z,1516720227.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:27.387Z,1516720227.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:27.764Z,1516720227.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:27.787Z,1516720227.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:28.169Z,1516720228.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:28.184Z,1516720228.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:28.563Z,1516720228.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:28.586Z,1516720228.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:28.971Z,1516720228.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:28.993Z,1516720228.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:29.368Z,1516720229.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:29.384Z,1516720229.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:29.768Z,1516720229.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:29.785Z,1516720229.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:30.163Z,1516720230.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:30.195Z,1516720230.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:30.564Z,1516720230.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:30.592Z,1516720230.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:30.960Z,1516720230.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:30.993Z,1516720230.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:31.364Z,1516720231.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:31.398Z,1516720231.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:31.760Z,1516720231.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:31.798Z,1516720231.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:32.164Z,1516720232.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:32.195Z,1516720232.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:32.561Z,1516720232.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:32.576Z,1516720232.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:32.964Z,1516720232.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:32.979Z,1516720232.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:33.362Z,1516720233.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:33.377Z,1516720233.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:33.772Z,1516720233.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:33.787Z,1516720233.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:34.167Z,1516720234.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:34.181Z,1516720234.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:34.565Z,1516720234.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:34.580Z,1516720234.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:34.966Z,1516720234.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:34.985Z,1516720234.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:35.367Z,1516720235.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:35.381Z,1516720235.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:35.767Z,1516720235.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:35.782Z,1516720235.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:36.165Z,1516720236.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:36.188Z,1516720236.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:36.567Z,1516720236.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:36.582Z,1516720236.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:36.966Z,1516720236.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:36.981Z,1516720236.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:37.376Z,1516720237.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:37.391Z,1516720237.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:37.767Z,1516720237.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:37.782Z,1516720237.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:38.167Z,1516720238.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:38.182Z,1516720238.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:38.570Z,1516720238.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:38.589Z,1516720238.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:38.969Z,1516720238.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:38.984Z,1516720238.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:39.365Z,1516720239.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:39.381Z,1516720239.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:39.766Z,1516720239.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:39.789Z,1516720239.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:40.167Z,1516720240.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:40.182Z,1516720240.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:40.565Z,1516720240.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:40.581Z,1516720240.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:40.966Z,1516720240.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:40.989Z,1516720240.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:41.368Z,1516720241.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:41.382Z,1516720241.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:41.771Z,1516720241.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:41.786Z,1516720241.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:42.168Z,1516720242.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:42.183Z,1516720242.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:42.568Z,1516720242.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:42.583Z,1516720242.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:42.966Z,1516720242.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:42.993Z,1516720242.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:43.368Z,1516720243.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:43.386Z,1516720243.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:43.768Z,1516720243.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:43.783Z,1516720243.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:44.168Z,1516720244.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:44.184Z,1516720244.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:44.564Z,1516720244.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:44.587Z,1516720244.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:44.960Z,1516720244.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:44.987Z,1516720244.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:45.358Z,1516720245.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:45.393Z,1516720245.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:45.764Z,1516720245.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:45.790Z,1516720245.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:46.160Z,1516720246.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:46.187Z,1516720246.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:46.558Z,1516720246.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:46.593Z,1516720246.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:46.960Z,1516720246.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:46.993Z,1516720246.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:47.364Z,1516720247.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:47.391Z,1516720247.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:47.760Z,1516720247.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:47.786Z,1516720247.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:48.160Z,1516720248.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:48.186Z,1516720248.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:48.563Z,1516720248.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:48.600Z,1516720248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:48.958Z,1516720248.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:48.985Z,1516720248.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:49.364Z,1516720249.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:49.390Z,1516720249.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:49.760Z,1516720249.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:49.793Z,1516720249.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:50.160Z,1516720250.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:50.188Z,1516720250.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:50.561Z,1516720250.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:50.597Z,1516720250.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:50.960Z,1516720250.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:50.997Z,1516720250.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:51.358Z,1516720251.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:51.373Z,1516720251.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:51.761Z,1516720251.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:51.797Z,1516720251.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:52.160Z,1516720252.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:52.175Z,1516720252.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:52.562Z,1516720252.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:52.577Z,1516720252.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:52.972Z,1516720252.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:53.003Z,1516720253.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:53.365Z,1516720253.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:53.380Z,1516720253.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:53.762Z,1516720253.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:53.777Z,1516720253.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:54.172Z,1516720254.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:54.187Z,1516720254.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:54.567Z,1516720254.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:54.582Z,1516720254.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:54.967Z,1516720254.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:54.982Z,1516720254.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:55.366Z,1516720255.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:55.385Z,1516720255.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:55.767Z,1516720255.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:55.782Z,1516720255.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:56.167Z,1516720256.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:56.182Z,1516720256.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:56.566Z,1516720256.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:56.585Z,1516720256.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:56.966Z,1516720256.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:56.981Z,1516720256.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:57.365Z,1516720257.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:57.380Z,1516720257.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:57.766Z,1516720257.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:57.788Z,1516720257.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:58.170Z,1516720258.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:58.184Z,1516720258.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:58.567Z,1516720258.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:58.582Z,1516720258.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:58.966Z,1516720258.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:58.988Z,1516720258.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:59.367Z,1516720259.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:59.383Z,1516720259.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:10:59.769Z,1516720259.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:10:59.785Z,1516720259.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:00.166Z,1516720260.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:00.193Z,1516720260.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:00.568Z,1516720260.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:00.589Z,1516720260.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:00.972Z,1516720260.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:00.988Z,1516720260.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:01.368Z,1516720261.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:01.386Z,1516720261.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:01.766Z,1516720261.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:01.793Z,1516720261.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:02.172Z,1516720262.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:02.188Z,1516720262.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:02.568Z,1516720262.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:02.586Z,1516720262.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:02.969Z,1516720262.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:02.984Z,1516720262.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:03.365Z,1516720263.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:03.393Z,1516720263.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:03.760Z,1516720263.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:03.788Z,1516720263.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:04.160Z,1516720264.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:04.195Z,1516720264.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:04.560Z,1516720264.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:04.588Z,1516720264.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:04.960Z,1516720264.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:04.996Z,1516720264.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:05.360Z,1516720265.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:05.396Z,1516720265.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:05.758Z,1516720265.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:05.789Z,1516720265.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:06.160Z,1516720266.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:06.193Z,1516720266.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:06.561Z,1516720266.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:06.597Z,1516720266.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:06.965Z,1516720266.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:06.992Z,1516720266.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:07.365Z,1516720267.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:07.391Z,1516720267.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:07.764Z,1516720267.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:07.790Z,1516720267.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:08.160Z,1516720268.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:08.193Z,1516720268.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:08.564Z,1516720268.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:08.596Z,1516720268.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:08.960Z,1516720268.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:08.000Z,1516720269.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:09.358Z,1516720269.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:09.373Z,1516720269.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:09.760Z,1516720269.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:09.805Z,1516720269.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:10.164Z,1516720270.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:10.206Z,1516720270.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:10.558Z,1516720270.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:10.573Z,1516720270.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:10.960Z,1516720270.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:10.980Z,1516720270.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:11.364Z,1516720271.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:11.379Z,1516720271.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:11.764Z,1516720271.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:11.779Z,1516720271.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:12.169Z,1516720272.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:12.184Z,1516720272.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:12.569Z,1516720272.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:12.584Z,1516720272.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:12.965Z,1516720272.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:12.981Z,1516720272.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:13.365Z,1516720273.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:13.391Z,1516720273.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:13.767Z,1516720273.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:13.782Z,1516720273.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:14.169Z,1516720274.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:14.185Z,1516720274.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:14.567Z,1516720274.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:14.581Z,1516720274.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:14.969Z,1516720274.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:14.984Z,1516720274.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:15.365Z,1516720275.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:15.381Z,1516720275.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:15.767Z,1516720275.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:15.782Z,1516720275.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:16.169Z,1516720276.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:16.184Z,1516720276.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:16.568Z,1516720276.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:16.584Z,1516720276.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:16.966Z,1516720276.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:16.981Z,1516720276.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:17.371Z,1516720277.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:17.428Z,1516720277.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:17.772Z,1516720277.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:17.787Z,1516720277.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:18.174Z,1516720278.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:18.197Z,1516720278.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:18.570Z,1516720278.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:18.630Z,1516720278.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:18.970Z,1516720278.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:18.994Z,1516720278.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:19.378Z,1516720279.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:19.438Z,1516720279.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:19.766Z,1516720279.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:19.792Z,1516720279.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:20.166Z,1516720280.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:20.201Z,1516720280.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:20.568Z,1516720280.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:20.593Z,1516720280.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:20.987Z,1516720280.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:21.002Z,1516720281.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:21.364Z,1516720281.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:21.395Z,1516720281.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:21.761Z,1516720281.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:21.803Z,1516720281.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:22.168Z,1516720282.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:22.264Z,1516720282.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:28.840Z,1516720288.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:28.860Z,1516720288.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:28.993Z,1516720288.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:29.024Z,1516720289.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:29.355Z,1516720289.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:29.392Z,1516720289.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:29.750Z,1516720289.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:29.789Z,1516720289.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:30.144Z,1516720290.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:30.189Z,1516720290.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:30.543Z,1516720290.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:30.593Z,1516720290.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:30.929Z,1516720290.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:30.990Z,1516720290.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:31.343Z,1516720291.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:31.353Z,1516720291.353 [PNI_TCM](ERROR): CRC does not match. Expected:0x36202 got:0x33942 2018-01-23T15:11:31.404Z,1516720291.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:31.746Z,1516720291.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:31.770Z,1516720291.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:32.144Z,1516720292.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:32.169Z,1516720292.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:32.532Z,1516720292.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:32.598Z,1516720292.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:32.934Z,1516720292.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:32.958Z,1516720292.958 [PNI_TCM](ERROR): CRC does not match. Expected:0x32991 got:0x33278 2018-01-23T15:11:32.985Z,1516720292.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:33.330Z,1516720293.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:33.373Z,1516720293.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:33.737Z,1516720293.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:33.785Z,1516720293.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:34.134Z,1516720294.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:34.188Z,1516720294.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:34.533Z,1516720294.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:34.581Z,1516720294.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:34.932Z,1516720294.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:34.992Z,1516720294.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:35.337Z,1516720295.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:35.381Z,1516720295.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:35.732Z,1516720295.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:35.770Z,1516720295.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:35.800Z,1516720295.800 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T15:11:35.800Z,1516720295.800 [NAL9602] No Fault, FailCount= 5 2018-01-23T15:11:36.120Z,1516720296.120 [NAL9602](INFO): Powering up NAL9602 2018-01-23T15:11:36.139Z,1516720296.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:36.217Z,1516720296.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:36.534Z,1516720296.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:36.586Z,1516720296.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:36.945Z,1516720296.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:36.962Z,1516720296.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:37.341Z,1516720297.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:37.382Z,1516720297.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:37.740Z,1516720297.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:37.760Z,1516720297.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:38.137Z,1516720298.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:38.156Z,1516720298.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:38.541Z,1516720298.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:38.556Z,1516720298.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:38.936Z,1516720298.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:38.983Z,1516720298.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:39.338Z,1516720299.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:39.356Z,1516720299.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:39.739Z,1516720299.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:39.758Z,1516720299.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:40.139Z,1516720300.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:40.156Z,1516720300.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:40.537Z,1516720300.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:40.587Z,1516720300.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:40.935Z,1516720300.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:40.954Z,1516720300.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:41.334Z,1516720301.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:41.354Z,1516720301.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:41.738Z,1516720301.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:41.757Z,1516720301.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:42.137Z,1516720302.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:42.161Z,1516720302.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:42.537Z,1516720302.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:42.552Z,1516720302.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:42.937Z,1516720302.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:42.957Z,1516720302.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:43.337Z,1516720303.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:43.356Z,1516720303.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:43.737Z,1516720303.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:43.761Z,1516720303.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:44.136Z,1516720304.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:44.153Z,1516720304.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:44.536Z,1516720304.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:44.555Z,1516720304.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:44.936Z,1516720304.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:44.956Z,1516720304.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:45.336Z,1516720305.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:45.353Z,1516720305.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:45.736Z,1516720305.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:45.753Z,1516720305.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:46.136Z,1516720306.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:46.151Z,1516720306.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:46.536Z,1516720306.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:46.556Z,1516720306.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:46.941Z,1516720306.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:46.957Z,1516720306.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:47.312Z,1516720307.312 [NAL9602](INFO): NAL9602 initialized 2018-01-23T15:11:47.338Z,1516720307.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:47.380Z,1516720307.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:47.740Z,1516720307.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:47.758Z,1516720307.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:48.149Z,1516720308.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:48.192Z,1516720308.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:48.544Z,1516720308.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:48.569Z,1516720308.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:48.936Z,1516720308.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:48.952Z,1516720308.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:49.338Z,1516720309.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:49.353Z,1516720309.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:49.732Z,1516720309.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:49.766Z,1516720309.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:50.146Z,1516720310.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:50.162Z,1516720310.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:50.546Z,1516720310.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:50.569Z,1516720310.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:50.946Z,1516720310.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:50.966Z,1516720310.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:51.336Z,1516720311.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:51.354Z,1516720311.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:51.728Z,1516720311.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:51.762Z,1516720311.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:52.131Z,1516720312.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:52.146Z,1516720312.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:52.528Z,1516720312.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:52.543Z,1516720312.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:52.948Z,1516720312.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:52.966Z,1516720312.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:53.339Z,1516720313.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:53.356Z,1516720313.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:53.743Z,1516720313.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:53.765Z,1516720313.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:54.130Z,1516720314.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:54.144Z,1516720314.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:54.526Z,1516720314.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:54.541Z,1516720314.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:54.930Z,1516720314.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:54.945Z,1516720314.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:55.333Z,1516720315.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:55.348Z,1516720315.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:55.726Z,1516720315.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:55.741Z,1516720315.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:56.145Z,1516720316.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:56.165Z,1516720316.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:56.543Z,1516720316.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:56.558Z,1516720316.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:56.943Z,1516720316.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:56.965Z,1516720316.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:57.332Z,1516720317.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:57.353Z,1516720317.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:57.733Z,1516720317.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:57.762Z,1516720317.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:58.132Z,1516720318.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:58.169Z,1516720318.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:58.540Z,1516720318.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:58.556Z,1516720318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:58.948Z,1516720318.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:58.963Z,1516720318.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:59.346Z,1516720319.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:59.363Z,1516720319.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:11:59.748Z,1516720319.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:11:59.763Z,1516720319.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:00.129Z,1516720320.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:00.156Z,1516720320.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:00.526Z,1516720320.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:00.563Z,1516720320.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:00.940Z,1516720320.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:00.961Z,1516720320.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:01.346Z,1516720321.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:01.361Z,1516720321.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:01.728Z,1516720321.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:01.765Z,1516720321.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:02.140Z,1516720322.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:02.169Z,1516720322.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:02.557Z,1516720322.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:02.579Z,1516720322.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:02.953Z,1516720322.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:02.968Z,1516720322.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:03.328Z,1516720323.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:03.366Z,1516720323.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:03.729Z,1516720323.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:03.773Z,1516720323.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:04.133Z,1516720324.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:04.167Z,1516720324.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:04.527Z,1516720324.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:04.569Z,1516720324.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:04.943Z,1516720324.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:04.977Z,1516720324.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:05.339Z,1516720325.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:05.375Z,1516720325.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:05.739Z,1516720325.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:05.767Z,1516720325.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:06.129Z,1516720326.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:06.173Z,1516720326.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:06.526Z,1516720326.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:06.541Z,1516720326.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:06.940Z,1516720326.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:06.971Z,1516720326.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:07.342Z,1516720327.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:07.370Z,1516720327.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:07.734Z,1516720327.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:07.750Z,1516720327.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:08.148Z,1516720328.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:08.188Z,1516720328.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:08.552Z,1516720328.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:08.585Z,1516720328.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:08.939Z,1516720328.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:08.971Z,1516720328.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:09.336Z,1516720329.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:09.353Z,1516720329.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:09.734Z,1516720329.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:09.758Z,1516720329.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:10.138Z,1516720330.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:10.154Z,1516720330.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:10.536Z,1516720330.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:10.552Z,1516720330.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:10.956Z,1516720330.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:10.987Z,1516720330.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:11.339Z,1516720331.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:11.355Z,1516720331.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:11.756Z,1516720331.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:11.786Z,1516720331.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:12.132Z,1516720332.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:12.152Z,1516720332.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:12.532Z,1516720332.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:12.564Z,1516720332.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:12.940Z,1516720332.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:12.961Z,1516720332.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:13.333Z,1516720333.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:13.357Z,1516720333.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:13.728Z,1516720333.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:13.767Z,1516720333.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:14.149Z,1516720334.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:14.164Z,1516720334.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:14.553Z,1516720334.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:14.568Z,1516720334.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:14.943Z,1516720334.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:14.982Z,1516720334.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:15.332Z,1516720335.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:15.360Z,1516720335.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:15.729Z,1516720335.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:15.756Z,1516720335.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:16.129Z,1516720336.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:16.161Z,1516720336.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:16.528Z,1516720336.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:16.565Z,1516720336.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:16.948Z,1516720336.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:16.981Z,1516720336.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:17.344Z,1516720337.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:17.374Z,1516720337.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:17.739Z,1516720337.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:17.771Z,1516720337.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:18.137Z,1516720338.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:18.153Z,1516720338.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:18.541Z,1516720338.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:18.557Z,1516720338.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:18.936Z,1516720338.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:18.952Z,1516720338.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:19.334Z,1516720339.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:19.362Z,1516720339.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:19.736Z,1516720339.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:19.753Z,1516720339.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:20.139Z,1516720340.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:20.156Z,1516720340.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:20.552Z,1516720340.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:20.583Z,1516720340.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:20.948Z,1516720340.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:20.964Z,1516720340.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:21.337Z,1516720341.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:21.353Z,1516720341.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:21.732Z,1516720341.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:21.757Z,1516720341.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:22.133Z,1516720342.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:22.169Z,1516720342.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:22.538Z,1516720342.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:22.554Z,1516720342.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:25.650Z,1516720345.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:25.666Z,1516720345.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:25.784Z,1516720345.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:25.826Z,1516720345.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:26.154Z,1516720346.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:26.173Z,1516720346.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:26.553Z,1516720346.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:26.568Z,1516720346.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:26.940Z,1516720346.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:26.973Z,1516720346.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:27.350Z,1516720347.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:27.365Z,1516720347.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:27.746Z,1516720347.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:27.762Z,1516720347.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:28.155Z,1516720348.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:28.171Z,1516720348.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:28.559Z,1516720348.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:28.574Z,1516720348.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:28.956Z,1516720348.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:28.971Z,1516720348.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:29.334Z,1516720349.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:29.362Z,1516720349.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:29.739Z,1516720349.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:29.771Z,1516720349.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:30.146Z,1516720350.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:30.161Z,1516720350.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:30.540Z,1516720350.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:30.571Z,1516720350.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:30.959Z,1516720350.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:30.974Z,1516720350.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:31.359Z,1516720351.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:31.380Z,1516720351.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:31.752Z,1516720351.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:31.776Z,1516720351.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:32.136Z,1516720352.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:32.169Z,1516720352.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:32.536Z,1516720352.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:32.571Z,1516720352.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:32.940Z,1516720352.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:32.973Z,1516720352.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:33.337Z,1516720353.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:33.364Z,1516720353.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:33.735Z,1516720353.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:33.765Z,1516720353.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:34.157Z,1516720354.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:34.172Z,1516720354.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:34.556Z,1516720354.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:34.584Z,1516720354.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:34.960Z,1516720354.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:34.975Z,1516720354.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:35.334Z,1516720355.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:35.357Z,1516720355.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:35.736Z,1516720355.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:35.774Z,1516720355.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:36.141Z,1516720356.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:36.181Z,1516720356.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:36.534Z,1516720356.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:36.550Z,1516720356.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:36.948Z,1516720356.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:36.983Z,1516720356.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:37.360Z,1516720357.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:37.388Z,1516720357.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:37.390Z,1516720357.390 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:37.390Z,1516720357.390 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 238 2018-01-23T15:12:37.390Z,1516720357.390 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:12:37.402Z,1516720357.402 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:12:37.756Z,1516720357.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:37.781Z,1516720357.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:37.793Z,1516720357.793 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:12:37.793Z,1516720357.793 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 238 2018-01-23T15:12:38.145Z,1516720358.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:38.161Z,1516720358.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:38.162Z,1516720358.162 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:12:38.179Z,1516720358.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:12:38.179Z,1516720358.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:12:38.541Z,1516720358.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:38.557Z,1516720358.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:38.949Z,1516720358.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:38.985Z,1516720358.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:39.346Z,1516720359.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:39.362Z,1516720359.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:39.741Z,1516720359.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:39.757Z,1516720359.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:40.152Z,1516720360.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:40.167Z,1516720360.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:40.552Z,1516720360.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:40.567Z,1516720360.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:40.948Z,1516720360.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:40.963Z,1516720360.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:41.340Z,1516720361.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:41.367Z,1516720361.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:41.749Z,1516720361.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:41.764Z,1516720361.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:42.144Z,1516720362.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:42.172Z,1516720362.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:42.544Z,1516720362.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:42.565Z,1516720362.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:42.950Z,1516720362.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:42.965Z,1516720362.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:43.352Z,1516720363.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:43.367Z,1516720363.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:43.750Z,1516720363.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:43.765Z,1516720363.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:44.144Z,1516720364.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:44.165Z,1516720364.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:44.545Z,1516720364.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:44.561Z,1516720364.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:44.944Z,1516720364.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:44.965Z,1516720364.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:45.344Z,1516720365.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:45.368Z,1516720365.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:45.750Z,1516720365.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:45.765Z,1516720365.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:46.155Z,1516720366.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:46.170Z,1516720366.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:46.554Z,1516720366.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:46.569Z,1516720366.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:46.956Z,1516720366.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:46.972Z,1516720366.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:47.340Z,1516720367.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:47.371Z,1516720367.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:47.740Z,1516720367.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:47.762Z,1516720367.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:48.141Z,1516720368.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:48.172Z,1516720368.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:48.536Z,1516720368.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:48.564Z,1516720368.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:48.952Z,1516720368.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:48.983Z,1516720368.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:48.985Z,1516720368.985 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:48.985Z,1516720368.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 238 2018-01-23T15:12:48.985Z,1516720368.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:12:49.006Z,1516720369.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:12:49.364Z,1516720369.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:49.391Z,1516720369.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:49.391Z,1516720369.391 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 238 2018-01-23T15:12:49.391Z,1516720369.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:12:49.412Z,1516720369.412 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:12:49.412Z,1516720369.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:12:49.412Z,1516720369.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 238 2018-01-23T15:12:49.748Z,1516720369.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:49.773Z,1516720369.773 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:12:49.774Z,1516720369.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:12:49.774Z,1516720369.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:12:49.786Z,1516720369.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:12:49.786Z,1516720369.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 238 2018-01-23T15:12:50.141Z,1516720370.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:50.176Z,1516720370.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:12:50.176Z,1516720370.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:12:50.177Z,1516720370.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:12:50.537Z,1516720370.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:50.552Z,1516720370.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:12:50.553Z,1516720370.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:50.944Z,1516720370.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:50.977Z,1516720370.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:12:50.977Z,1516720370.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:51.345Z,1516720371.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:51.360Z,1516720371.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:12:51.361Z,1516720371.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:51.742Z,1516720371.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:51.758Z,1516720371.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:12:51.759Z,1516720371.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:52.156Z,1516720372.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:52.183Z,1516720372.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:12:52.184Z,1516720372.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:52.560Z,1516720372.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:52.591Z,1516720372.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:12:52.592Z,1516720372.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:52.953Z,1516720372.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:52.972Z,1516720372.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:12:52.973Z,1516720372.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:53.350Z,1516720373.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:53.365Z,1516720373.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:12:53.366Z,1516720373.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:53.740Z,1516720373.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:53.763Z,1516720373.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:12:53.764Z,1516720373.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:54.138Z,1516720374.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:54.168Z,1516720374.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:12:54.169Z,1516720374.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:54.536Z,1516720374.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:54.574Z,1516720374.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:12:54.579Z,1516720374.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:54.957Z,1516720374.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:54.972Z,1516720374.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:12:54.973Z,1516720374.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:55.352Z,1516720375.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:55.388Z,1516720375.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:12:55.389Z,1516720375.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:55.756Z,1516720375.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:55.782Z,1516720375.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:12:55.783Z,1516720375.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:56.148Z,1516720376.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:56.175Z,1516720376.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:12:56.176Z,1516720376.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:56.545Z,1516720376.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:56.584Z,1516720376.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:12:56.585Z,1516720376.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:56.949Z,1516720376.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:56.988Z,1516720376.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:12:56.989Z,1516720376.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:57.350Z,1516720377.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:57.365Z,1516720377.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:12:57.365Z,1516720377.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:57.745Z,1516720377.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:57.769Z,1516720377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:12:57.770Z,1516720377.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:58.155Z,1516720378.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:58.170Z,1516720378.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:12:58.171Z,1516720378.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:58.556Z,1516720378.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:58.576Z,1516720378.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:12:58.577Z,1516720378.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:58.961Z,1516720378.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:58.976Z,1516720378.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:12:58.977Z,1516720378.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:59.344Z,1516720379.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:59.371Z,1516720379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:12:59.372Z,1516720379.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:12:59.739Z,1516720379.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:12:59.766Z,1516720379.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:12:59.771Z,1516720379.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:00.138Z,1516720380.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:00.169Z,1516720380.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:13:00.175Z,1516720380.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:00.537Z,1516720380.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:00.572Z,1516720380.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:13:00.573Z,1516720380.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:00.955Z,1516720380.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:00.977Z,1516720380.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:13:00.978Z,1516720380.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:01.361Z,1516720381.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:01.377Z,1516720381.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:13:01.378Z,1516720381.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:01.749Z,1516720381.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:01.782Z,1516720381.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:13:01.783Z,1516720381.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:02.136Z,1516720382.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:02.153Z,1516720382.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:13:02.154Z,1516720382.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:02.536Z,1516720382.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:02.553Z,1516720382.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:13:02.554Z,1516720382.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:02.944Z,1516720382.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:02.961Z,1516720382.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:13:02.962Z,1516720382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:03.342Z,1516720383.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:03.358Z,1516720383.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:13:03.359Z,1516720383.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:03.741Z,1516720383.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:03.772Z,1516720383.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:13:03.772Z,1516720383.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:04.149Z,1516720384.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:04.165Z,1516720384.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:13:04.166Z,1516720384.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:04.552Z,1516720384.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:04.567Z,1516720384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:13:04.568Z,1516720384.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:04.951Z,1516720384.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:04.973Z,1516720384.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:13:04.974Z,1516720384.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:05.349Z,1516720385.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:05.368Z,1516720385.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:13:05.369Z,1516720385.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:05.744Z,1516720385.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:05.764Z,1516720385.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:13:05.765Z,1516720385.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:06.146Z,1516720386.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:06.161Z,1516720386.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:13:06.162Z,1516720386.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:06.545Z,1516720386.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:06.564Z,1516720386.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:13:06.565Z,1516720386.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:06.954Z,1516720386.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:06.969Z,1516720386.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:13:06.970Z,1516720386.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:07.355Z,1516720387.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:07.376Z,1516720387.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:13:07.377Z,1516720387.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:07.754Z,1516720387.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:07.768Z,1516720387.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:13:07.769Z,1516720387.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:08.144Z,1516720388.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:08.164Z,1516720388.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:13:08.165Z,1516720388.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:08.546Z,1516720388.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:08.561Z,1516720388.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:13:08.562Z,1516720388.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:08.944Z,1516720388.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:08.964Z,1516720388.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:13:08.965Z,1516720388.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:09.341Z,1516720389.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:09.368Z,1516720389.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:13:09.369Z,1516720389.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:09.750Z,1516720389.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:09.764Z,1516720389.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:10.155Z,1516720390.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:10.170Z,1516720390.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:10.559Z,1516720390.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:10.574Z,1516720390.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:10.957Z,1516720390.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:10.972Z,1516720390.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:11.340Z,1516720391.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:11.371Z,1516720391.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:11.740Z,1516720391.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:11.771Z,1516720391.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:12.146Z,1516720392.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:12.161Z,1516720392.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:12.540Z,1516720392.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:12.571Z,1516720392.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:12.955Z,1516720392.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:12.970Z,1516720392.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:13.359Z,1516720393.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:13.374Z,1516720393.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:13.756Z,1516720393.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:13.771Z,1516720393.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:14.141Z,1516720394.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:14.172Z,1516720394.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:14.550Z,1516720394.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:14.565Z,1516720394.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:14.959Z,1516720394.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:14.981Z,1516720394.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:15.359Z,1516720395.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:15.374Z,1516720395.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:15.753Z,1516720395.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:15.780Z,1516720395.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:16.137Z,1516720396.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:16.165Z,1516720396.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:16.536Z,1516720396.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:16.573Z,1516720396.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:16.961Z,1516720396.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:16.976Z,1516720396.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:17.364Z,1516720397.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:17.385Z,1516720397.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:17.760Z,1516720397.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:17.781Z,1516720397.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:18.137Z,1516720398.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:18.166Z,1516720398.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:18.537Z,1516720398.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:18.564Z,1516720398.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:18.952Z,1516720398.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:18.983Z,1516720398.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:19.361Z,1516720399.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:19.375Z,1516720399.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:19.757Z,1516720399.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:19.777Z,1516720399.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:20.137Z,1516720400.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:20.164Z,1516720400.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:20.536Z,1516720400.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:20.565Z,1516720400.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:20.568Z,1516720400.568 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:08:20.2Z 2018-01-23T15:13:20.568Z,1516720400.568 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:13:20.568Z,1516720400.568 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:13:20.957Z,1516720400.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:20.972Z,1516720400.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:21.483Z,1516720401.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:21.498Z,1516720401.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:21.761Z,1516720401.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:21.776Z,1516720401.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:24.841Z,1516720404.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:24.867Z,1516720404.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:24.950Z,1516720404.950 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0280.lzma 2018-01-23T15:13:24.970Z,1516720404.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:25.018Z,1516720405.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:25.322Z,1516720405.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:25.337Z,1516720405.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:25.694Z,1516720405.694 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0280.lzma.bak 2018-01-23T15:13:25.694Z,1516720405.694 [DataOverHttps](INFO): SBD MOMSN=7755764 2018-01-23T15:13:25.743Z,1516720405.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:25.781Z,1516720405.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:26.484Z,1516720406.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:26.499Z,1516720406.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:26.595Z,1516720406.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:26.632Z,1516720406.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:29.676Z,1516720409.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:29.691Z,1516720409.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:29.785Z,1516720409.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:29.828Z,1516720409.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:30.152Z,1516720410.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:30.185Z,1516720410.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:30.574Z,1516720410.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:30.589Z,1516720410.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:30.948Z,1516720410.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:30.979Z,1516720410.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:31.342Z,1516720411.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:31.361Z,1516720411.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:34.435Z,1516720414.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:34.450Z,1516720414.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:34.527Z,1516720414.527 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0281.lzma 2018-01-23T15:13:34.549Z,1516720414.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:34.595Z,1516720414.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:34.915Z,1516720414.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:34.949Z,1516720414.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:35.278Z,1516720415.278 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0281.lzma.bak 2018-01-23T15:13:35.278Z,1516720415.278 [DataOverHttps](INFO): SBD MOMSN=7755767 2018-01-23T15:13:35.332Z,1516720415.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:35.360Z,1516720415.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:35.957Z,1516720415.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:35.989Z,1516720415.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:35.992Z,1516720415.992 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:13:35.992Z,1516720415.992 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:13:35.992Z,1516720415.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:13:36.100Z,1516720416.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:36.140Z,1516720416.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:39.199Z,1516720419.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:39.215Z,1516720419.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:39.313Z,1516720419.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:39.350Z,1516720419.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:39.703Z,1516720419.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:39.719Z,1516720419.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:40.107Z,1516720420.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:40.122Z,1516720420.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:40.502Z,1516720420.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:40.521Z,1516720420.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:40.896Z,1516720420.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:40.917Z,1516720420.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:41.298Z,1516720421.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:41.312Z,1516720421.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:41.696Z,1516720421.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:41.711Z,1516720421.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:42.101Z,1516720422.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:42.121Z,1516720422.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:42.503Z,1516720422.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:42.518Z,1516720422.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:42.904Z,1516720422.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:42.919Z,1516720422.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:43.296Z,1516720423.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:43.311Z,1516720423.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:43.697Z,1516720423.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:43.712Z,1516720423.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:44.096Z,1516720424.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:44.112Z,1516720424.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:44.502Z,1516720424.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:44.517Z,1516720424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:44.896Z,1516720424.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:44.911Z,1516720424.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:45.304Z,1516720425.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:45.319Z,1516720425.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:45.703Z,1516720425.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:45.718Z,1516720425.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:46.102Z,1516720426.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:46.117Z,1516720426.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:46.496Z,1516720426.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:46.511Z,1516720426.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:46.892Z,1516720426.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:46.921Z,1516720426.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:47.298Z,1516720427.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:47.320Z,1516720427.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:47.700Z,1516720427.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:47.721Z,1516720427.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:48.101Z,1516720428.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:48.121Z,1516720428.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:48.507Z,1516720428.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:48.522Z,1516720428.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:48.902Z,1516720428.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:48.921Z,1516720428.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:49.296Z,1516720429.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:49.311Z,1516720429.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:49.697Z,1516720429.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:49.712Z,1516720429.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:50.096Z,1516720430.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:50.111Z,1516720430.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:50.492Z,1516720430.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:50.525Z,1516720430.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:50.901Z,1516720430.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:50.916Z,1516720430.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:51.306Z,1516720431.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:51.321Z,1516720431.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:51.707Z,1516720431.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:51.722Z,1516720431.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:52.107Z,1516720432.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:52.121Z,1516720432.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:52.498Z,1516720432.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:52.517Z,1516720432.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:52.900Z,1516720432.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:52.921Z,1516720432.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:53.297Z,1516720433.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:53.346Z,1516720433.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:53.701Z,1516720433.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:53.721Z,1516720433.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:54.106Z,1516720434.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:54.170Z,1516720434.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:54.506Z,1516720434.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:54.521Z,1516720434.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:54.906Z,1516720434.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:54.921Z,1516720434.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:55.296Z,1516720435.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:55.311Z,1516720435.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:55.697Z,1516720435.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:55.712Z,1516720435.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:56.097Z,1516720436.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:56.117Z,1516720436.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:56.492Z,1516720436.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:56.515Z,1516720436.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:56.896Z,1516720436.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:56.921Z,1516720436.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:57.307Z,1516720437.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:57.322Z,1516720437.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:57.710Z,1516720437.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:57.729Z,1516720437.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:58.108Z,1516720438.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:58.122Z,1516720438.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:58.500Z,1516720438.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:58.515Z,1516720438.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:58.891Z,1516720438.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:58.923Z,1516720438.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:59.298Z,1516720439.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:59.312Z,1516720439.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:13:59.692Z,1516720439.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:13:59.714Z,1516720439.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:00.116Z,1516720440.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:00.161Z,1516720440.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:00.511Z,1516720440.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:00.526Z,1516720440.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:00.908Z,1516720440.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:00.923Z,1516720440.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:01.288Z,1516720441.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:01.317Z,1516720441.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:01.688Z,1516720441.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:01.725Z,1516720441.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:02.088Z,1516720442.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:02.125Z,1516720442.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:02.493Z,1516720442.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:02.519Z,1516720442.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:02.887Z,1516720442.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:02.921Z,1516720442.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:03.307Z,1516720443.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:03.322Z,1516720443.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:03.710Z,1516720443.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:03.733Z,1516720443.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:04.112Z,1516720444.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:04.127Z,1516720444.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:04.496Z,1516720444.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:04.523Z,1516720444.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:04.888Z,1516720444.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:04.925Z,1516720444.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:05.290Z,1516720445.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:05.322Z,1516720445.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:05.693Z,1516720445.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:05.720Z,1516720445.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:06.108Z,1516720446.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:06.123Z,1516720446.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:06.512Z,1516720446.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:06.527Z,1516720446.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:06.904Z,1516720446.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:06.927Z,1516720446.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:07.288Z,1516720447.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:07.325Z,1516720447.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:07.688Z,1516720447.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:07.704Z,1516720447.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:08.088Z,1516720448.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:08.105Z,1516720448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:08.501Z,1516720448.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:08.533Z,1516720448.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:08.899Z,1516720448.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:08.915Z,1516720448.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:09.312Z,1516720449.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:09.342Z,1516720449.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:09.707Z,1516720449.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:09.735Z,1516720449.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:10.111Z,1516720450.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:10.126Z,1516720450.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:10.498Z,1516720450.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:10.513Z,1516720450.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:10.896Z,1516720450.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:10.911Z,1516720450.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:11.299Z,1516720451.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:11.314Z,1516720451.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:11.696Z,1516720451.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:11.729Z,1516720451.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:12.108Z,1516720452.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:12.139Z,1516720452.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:12.513Z,1516720452.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:12.528Z,1516720452.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:12.904Z,1516720452.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:12.935Z,1516720452.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:13.289Z,1516720453.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:13.325Z,1516720453.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:13.693Z,1516720453.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:13.734Z,1516720453.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:14.090Z,1516720454.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:14.129Z,1516720454.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:14.489Z,1516720454.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:14.506Z,1516720454.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:14.887Z,1516720454.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:14.903Z,1516720454.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:15.304Z,1516720455.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:15.340Z,1516720455.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:15.712Z,1516720455.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:15.741Z,1516720455.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:16.103Z,1516720456.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:16.128Z,1516720456.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:16.494Z,1516720456.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:16.509Z,1516720456.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:16.898Z,1516720456.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:16.918Z,1516720456.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:17.293Z,1516720457.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:17.321Z,1516720457.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:17.697Z,1516720457.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:17.713Z,1516720457.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:18.099Z,1516720458.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:18.114Z,1516720458.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:18.503Z,1516720458.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:18.518Z,1516720458.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:18.900Z,1516720458.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:18.915Z,1516720458.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:19.295Z,1516720459.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:19.310Z,1516720459.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:19.696Z,1516720459.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:19.711Z,1516720459.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:20.096Z,1516720460.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:20.111Z,1516720460.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:20.492Z,1516720460.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:20.515Z,1516720460.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:20.897Z,1516720460.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:20.912Z,1516720460.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:21.301Z,1516720461.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:21.321Z,1516720461.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:21.703Z,1516720461.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:21.718Z,1516720461.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:22.102Z,1516720462.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:22.124Z,1516720462.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:22.492Z,1516720462.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:22.512Z,1516720462.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:22.896Z,1516720462.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:22.917Z,1516720462.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:23.302Z,1516720463.302 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:23.316Z,1516720463.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:23.696Z,1516720463.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:23.717Z,1516720463.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:24.106Z,1516720464.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:24.129Z,1516720464.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:24.506Z,1516720464.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:24.528Z,1516720464.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:24.906Z,1516720464.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:24.921Z,1516720464.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:25.298Z,1516720465.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:25.313Z,1516720465.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:25.699Z,1516720465.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:25.713Z,1516720465.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:26.096Z,1516720466.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:26.111Z,1516720466.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:26.493Z,1516720466.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:26.515Z,1516720466.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:26.897Z,1516720466.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:26.912Z,1516720466.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:27.303Z,1516720467.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:27.331Z,1516720467.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:27.711Z,1516720467.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:27.726Z,1516720467.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:28.102Z,1516720468.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:28.135Z,1516720468.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:28.486Z,1516720468.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:28.513Z,1516720468.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:28.888Z,1516720468.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:28.920Z,1516720468.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:29.289Z,1516720469.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:29.326Z,1516720469.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:29.692Z,1516720469.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:29.718Z,1516720469.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:30.106Z,1516720470.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:30.134Z,1516720470.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:30.512Z,1516720470.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:30.526Z,1516720470.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:30.907Z,1516720470.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:30.922Z,1516720470.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:31.288Z,1516720471.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:31.321Z,1516720471.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:31.688Z,1516720471.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:31.727Z,1516720471.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:32.088Z,1516720472.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:32.125Z,1516720472.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:32.489Z,1516720472.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:32.504Z,1516720472.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:32.534Z,1516720472.534 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:14:32.893Z,1516720472.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:32.908Z,1516720472.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:33.303Z,1516720473.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:33.335Z,1516720473.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:33.715Z,1516720473.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:33.745Z,1516720473.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:34.111Z,1516720474.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:34.144Z,1516720474.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:34.489Z,1516720474.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:34.504Z,1516720474.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:34.893Z,1516720474.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:34.908Z,1516720474.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:35.301Z,1516720475.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:35.316Z,1516720475.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:35.689Z,1516720475.689 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:35.709Z,1516720475.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:36.103Z,1516720476.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:36.118Z,1516720476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:36.511Z,1516720476.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:36.545Z,1516720476.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:39.592Z,1516720479.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:39.615Z,1516720479.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:39.710Z,1516720479.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:39.725Z,1516720479.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:40.093Z,1516720480.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:40.112Z,1516720480.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:40.500Z,1516720480.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:40.521Z,1516720480.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:40.896Z,1516720480.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:40.917Z,1516720480.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:41.303Z,1516720481.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:41.318Z,1516720481.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:41.699Z,1516720481.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:41.714Z,1516720481.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:42.102Z,1516720482.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:42.117Z,1516720482.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:42.490Z,1516720482.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:42.505Z,1516720482.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:42.878Z,1516720482.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:42.906Z,1516720482.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:43.300Z,1516720483.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:43.321Z,1516720483.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:43.694Z,1516720483.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:43.709Z,1516720483.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:44.100Z,1516720484.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:44.115Z,1516720484.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:44.503Z,1516720484.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:44.518Z,1516720484.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:44.904Z,1516720484.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:44.924Z,1516720484.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:45.278Z,1516720485.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:45.306Z,1516720485.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:45.685Z,1516720485.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:45.708Z,1516720485.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:46.089Z,1516720486.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:46.108Z,1516720486.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:46.494Z,1516720486.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:46.509Z,1516720486.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:46.883Z,1516720486.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:46.916Z,1516720486.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:47.300Z,1516720487.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:47.315Z,1516720487.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:47.703Z,1516720487.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:47.719Z,1516720487.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:48.104Z,1516720488.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:48.119Z,1516720488.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:48.490Z,1516720488.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:48.512Z,1516720488.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:48.878Z,1516720488.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:48.910Z,1516720488.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:49.294Z,1516720489.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:49.309Z,1516720489.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:49.702Z,1516720489.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:49.717Z,1516720489.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:50.107Z,1516720490.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:50.123Z,1516720490.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:50.506Z,1516720490.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:50.521Z,1516720490.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:50.899Z,1516720490.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:50.919Z,1516720490.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:51.292Z,1516720491.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:51.323Z,1516720491.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:51.699Z,1516720491.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:51.714Z,1516720491.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:52.100Z,1516720492.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:52.121Z,1516720492.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:52.496Z,1516720492.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:52.533Z,1516720492.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:52.909Z,1516720492.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:52.929Z,1516720492.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:53.289Z,1516720493.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:53.319Z,1516720493.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:53.681Z,1516720493.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:53.713Z,1516720493.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:54.091Z,1516720494.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:54.121Z,1516720494.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:54.504Z,1516720494.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:54.521Z,1516720494.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:54.903Z,1516720494.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:54.920Z,1516720494.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:55.281Z,1516720495.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:55.317Z,1516720495.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:55.681Z,1516720495.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:55.719Z,1516720495.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:56.092Z,1516720496.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:56.130Z,1516720496.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:56.510Z,1516720496.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:56.525Z,1516720496.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:56.895Z,1516720496.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:56.930Z,1516720496.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:57.285Z,1516720497.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:57.317Z,1516720497.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:57.683Z,1516720497.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:57.698Z,1516720497.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:58.099Z,1516720498.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:58.127Z,1516720498.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:58.495Z,1516720498.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:58.526Z,1516720498.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:58.895Z,1516720498.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:58.910Z,1516720498.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:59.292Z,1516720499.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:59.306Z,1516720499.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:14:59.687Z,1516720499.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:14:59.709Z,1516720499.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:00.103Z,1516720500.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:00.134Z,1516720500.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:00.499Z,1516720500.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:00.514Z,1516720500.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:00.897Z,1516720500.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:00.912Z,1516720500.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:01.296Z,1516720501.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:01.310Z,1516720501.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:01.693Z,1516720501.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:01.708Z,1516720501.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:02.094Z,1516720502.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:02.117Z,1516720502.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:02.500Z,1516720502.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:02.515Z,1516720502.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:02.897Z,1516720502.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:02.911Z,1516720502.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:03.290Z,1516720503.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:03.317Z,1516720503.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:03.696Z,1516720503.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:03.711Z,1516720503.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:04.102Z,1516720504.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:04.117Z,1516720504.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:04.499Z,1516720504.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:04.514Z,1516720504.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:04.898Z,1516720504.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:04.917Z,1516720504.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:05.297Z,1516720505.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:05.312Z,1516720505.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:05.696Z,1516720505.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:05.710Z,1516720505.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:06.100Z,1516720506.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:06.117Z,1516720506.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:06.498Z,1516720506.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:06.513Z,1516720506.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:06.898Z,1516720506.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:06.917Z,1516720506.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:07.288Z,1516720507.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:07.313Z,1516720507.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:07.692Z,1516720507.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:07.707Z,1516720507.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:08.099Z,1516720508.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:08.114Z,1516720508.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:08.507Z,1516720508.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:08.522Z,1516720508.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:08.902Z,1516720508.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:08.917Z,1516720508.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:09.288Z,1516720509.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:09.310Z,1516720509.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:09.685Z,1516720509.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:09.708Z,1516720509.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:10.103Z,1516720510.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:10.124Z,1516720510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:10.501Z,1516720510.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:10.516Z,1516720510.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:10.905Z,1516720510.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:10.925Z,1516720510.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:11.293Z,1516720511.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:11.308Z,1516720511.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:11.692Z,1516720511.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:11.712Z,1516720511.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:12.102Z,1516720512.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:12.117Z,1516720512.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:12.507Z,1516720512.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:12.528Z,1516720512.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:12.900Z,1516720512.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:12.917Z,1516720512.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:13.287Z,1516720513.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:13.310Z,1516720513.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:13.681Z,1516720513.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:13.724Z,1516720513.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:14.107Z,1516720514.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:14.114Z,1516720514.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x14364 got:0x3744 2018-01-23T15:15:14.152Z,1516720514.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:14.500Z,1516720514.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:14.523Z,1516720514.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:14.904Z,1516720514.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:14.924Z,1516720514.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:15.281Z,1516720515.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:15.329Z,1516720515.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:15.684Z,1516720515.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:15.704Z,1516720515.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x51768 got:0x7234 2018-01-23T15:15:15.733Z,1516720515.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:16.106Z,1516720516.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:16.121Z,1516720516.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:16.502Z,1516720516.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:16.518Z,1516720516.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:16.896Z,1516720516.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:16.933Z,1516720516.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:17.285Z,1516720517.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:17.317Z,1516720517.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:17.681Z,1516720517.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:17.710Z,1516720517.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:18.096Z,1516720518.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:18.119Z,1516720518.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:18.503Z,1516720518.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:18.527Z,1516720518.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:18.900Z,1516720518.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:18.935Z,1516720518.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:19.282Z,1516720519.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:19.321Z,1516720519.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:19.683Z,1516720519.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:19.719Z,1516720519.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:20.099Z,1516720520.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:20.137Z,1516720520.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:20.511Z,1516720520.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:20.519Z,1516720520.519 [PNI_TCM](ERROR): CRC does not match. Expected:0x4943 got:0x59933 2018-01-23T15:15:20.554Z,1516720520.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:20.911Z,1516720520.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:20.926Z,1516720520.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:21.283Z,1516720521.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:21.310Z,1516720521.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:21.682Z,1516720521.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:21.713Z,1516720521.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:22.081Z,1516720522.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:22.124Z,1516720522.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:22.506Z,1516720522.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:22.521Z,1516720522.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:22.899Z,1516720522.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:22.931Z,1516720522.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:23.292Z,1516720523.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:23.341Z,1516720523.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:23.684Z,1516720523.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:23.720Z,1516720523.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:24.080Z,1516720524.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:24.131Z,1516720524.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:24.483Z,1516720524.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:24.517Z,1516720524.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:24.884Z,1516720524.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:24.932Z,1516720524.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:25.291Z,1516720525.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:25.324Z,1516720525.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:25.705Z,1516720525.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:25.741Z,1516720525.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:26.101Z,1516720526.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:26.128Z,1516720526.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:26.491Z,1516720526.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:26.536Z,1516720526.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:26.893Z,1516720526.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:26.933Z,1516720526.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:27.285Z,1516720527.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:27.323Z,1516720527.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:27.695Z,1516720527.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:27.710Z,1516720527.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:28.087Z,1516720528.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:28.134Z,1516720528.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:28.495Z,1516720528.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:28.514Z,1516720528.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:28.904Z,1516720528.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:28.936Z,1516720528.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:29.298Z,1516720529.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:29.321Z,1516720529.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:29.694Z,1516720529.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:29.740Z,1516720529.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:30.090Z,1516720530.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:30.105Z,1516720530.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:30.490Z,1516720530.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:30.511Z,1516720530.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:30.885Z,1516720530.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:30.917Z,1516720530.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:31.300Z,1516720531.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:31.341Z,1516720531.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:31.704Z,1516720531.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:31.724Z,1516720531.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:32.099Z,1516720532.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:32.119Z,1516720532.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:32.484Z,1516720532.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:32.516Z,1516720532.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:32.880Z,1516720532.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:32.908Z,1516720532.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:33.281Z,1516720533.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:33.312Z,1516720533.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:33.693Z,1516720533.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:33.712Z,1516720533.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:34.080Z,1516720534.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:34.119Z,1516720534.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:34.498Z,1516720534.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:34.513Z,1516720534.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:34.903Z,1516720534.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:34.920Z,1516720534.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:35.297Z,1516720535.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:35.321Z,1516720535.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:35.684Z,1516720535.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:35.721Z,1516720535.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:36.079Z,1516720536.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:36.113Z,1516720536.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:36.481Z,1516720536.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:36.518Z,1516720536.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:36.885Z,1516720536.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:36.913Z,1516720536.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:40.000Z,1516720540.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:40.016Z,1516720540.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:40.018Z,1516720540.018 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:40.018Z,1516720540.018 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 239 2018-01-23T15:15:40.018Z,1516720540.018 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:15:40.030Z,1516720540.030 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:15:40.140Z,1516720540.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:40.165Z,1516720540.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:40.178Z,1516720540.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:15:40.178Z,1516720540.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 239 2018-01-23T15:15:40.479Z,1516720540.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:40.520Z,1516720540.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:40.521Z,1516720540.521 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:15:40.522Z,1516720540.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:15:40.522Z,1516720540.522 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:15:40.870Z,1516720540.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:40.893Z,1516720540.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:41.264Z,1516720541.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:41.284Z,1516720541.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:41.668Z,1516720541.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:41.687Z,1516720541.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:42.069Z,1516720542.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:42.084Z,1516720542.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:42.474Z,1516720542.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:42.493Z,1516720542.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:42.875Z,1516720542.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:42.890Z,1516720542.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:43.274Z,1516720543.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:43.289Z,1516720543.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:43.661Z,1516720543.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:43.688Z,1516720543.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:44.064Z,1516720544.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:44.086Z,1516720544.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:44.469Z,1516720544.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:44.488Z,1516720544.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:44.864Z,1516720544.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:44.886Z,1516720544.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:44.900Z,1516720544.900 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-23T15:15:45.278Z,1516720545.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:45.294Z,1516720545.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:45.683Z,1516720545.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:45.704Z,1516720545.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:46.082Z,1516720546.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:46.097Z,1516720546.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:46.464Z,1516720546.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:46.486Z,1516720546.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:46.873Z,1516720546.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:46.888Z,1516720546.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:47.264Z,1516720547.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:47.286Z,1516720547.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:47.663Z,1516720547.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:47.696Z,1516720547.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:48.070Z,1516720548.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:48.085Z,1516720548.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:48.478Z,1516720548.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:48.494Z,1516720548.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:48.882Z,1516720548.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:48.897Z,1516720548.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:49.282Z,1516720549.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:49.297Z,1516720549.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:49.658Z,1516720549.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:49.693Z,1516720549.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:50.071Z,1516720550.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:50.086Z,1516720550.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:50.088Z,1516720550.088 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:50.088Z,1516720550.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 239 2018-01-23T15:15:50.088Z,1516720550.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:15:50.101Z,1516720550.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:15:50.463Z,1516720550.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:50.490Z,1516720550.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:50.490Z,1516720550.490 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 239 2018-01-23T15:15:50.490Z,1516720550.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:15:50.503Z,1516720550.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:15:50.503Z,1516720550.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:15:50.503Z,1516720550.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 239 2018-01-23T15:15:50.858Z,1516720550.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:50.872Z,1516720550.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:15:50.873Z,1516720550.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:15:50.873Z,1516720550.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:15:50.902Z,1516720550.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:15:50.902Z,1516720550.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 239 2018-01-23T15:15:51.271Z,1516720551.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:51.296Z,1516720551.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:15:51.297Z,1516720551.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:15:51.297Z,1516720551.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:15:51.675Z,1516720551.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:51.711Z,1516720551.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:15:51.712Z,1516720551.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:52.071Z,1516720552.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:52.097Z,1516720552.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:15:52.098Z,1516720552.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:52.460Z,1516720552.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:52.500Z,1516720552.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:15:52.501Z,1516720552.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:52.864Z,1516720552.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:52.879Z,1516720552.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:15:52.880Z,1516720552.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:53.260Z,1516720553.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:53.274Z,1516720553.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:15:53.275Z,1516720553.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:53.673Z,1516720553.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:53.688Z,1516720553.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:15:53.689Z,1516720553.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:54.069Z,1516720554.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:54.083Z,1516720554.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:15:54.084Z,1516720554.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:54.471Z,1516720554.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:54.486Z,1516720554.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:15:54.487Z,1516720554.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:54.875Z,1516720554.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:54.890Z,1516720554.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:15:54.891Z,1516720554.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:55.275Z,1516720555.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:55.296Z,1516720555.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:15:55.297Z,1516720555.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:55.666Z,1516720555.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:55.681Z,1516720555.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:15:55.682Z,1516720555.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:55.698Z,1516720555.698 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.002206 CHAN A1 (24V): -0.006366 CHAN A2 (12V): 0.000066 CHAN A3 (5V): -0.002171 CHAN B0 (3.3V): -0.000098 CHAN B1 (3.15aV): 0.000449 CHAN B2 (3.15bV): 0.000146 CHAN B3 (GND): -0.000248 OPEN: 0.005518 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-23T15:15:56.072Z,1516720556.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:56.099Z,1516720556.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:15:56.100Z,1516720556.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:56.462Z,1516720556.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:56.498Z,1516720556.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:15:56.499Z,1516720556.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:56.859Z,1516720556.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:56.874Z,1516720556.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:15:56.874Z,1516720556.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:57.272Z,1516720557.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:57.308Z,1516720557.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:15:57.309Z,1516720557.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:57.675Z,1516720557.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:57.708Z,1516720557.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:15:57.709Z,1516720557.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:58.072Z,1516720558.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:58.098Z,1516720558.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:15:58.099Z,1516720558.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:58.468Z,1516720558.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:58.500Z,1516720558.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:15:58.501Z,1516720558.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:58.861Z,1516720558.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:58.904Z,1516720558.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:15:58.905Z,1516720558.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:59.258Z,1516720559.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:59.273Z,1516720559.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:15:59.274Z,1516720559.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:15:59.661Z,1516720559.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:15:59.676Z,1516720559.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:15:59.677Z,1516720559.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:00.068Z,1516720560.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:00.083Z,1516720560.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:16:00.084Z,1516720560.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:00.471Z,1516720560.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:00.486Z,1516720560.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:16:00.503Z,1516720560.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:00.887Z,1516720560.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:00.916Z,1516720560.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:16:00.917Z,1516720560.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:01.283Z,1516720561.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:01.309Z,1516720561.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:16:01.310Z,1516720561.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:01.663Z,1516720561.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:01.678Z,1516720561.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:16:01.679Z,1516720561.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:02.072Z,1516720562.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:02.108Z,1516720562.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:16:02.109Z,1516720562.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:02.469Z,1516720562.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:02.483Z,1516720562.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:16:02.484Z,1516720562.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:02.867Z,1516720562.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:02.882Z,1516720562.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:16:02.883Z,1516720562.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:03.283Z,1516720563.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:03.314Z,1516720563.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:16:03.319Z,1516720563.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:03.679Z,1516720563.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:03.693Z,1516720563.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:16:03.694Z,1516720563.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:04.076Z,1516720564.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:04.091Z,1516720564.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:16:04.092Z,1516720564.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:04.470Z,1516720564.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:04.492Z,1516720564.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:16:04.493Z,1516720564.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:04.870Z,1516720564.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:04.885Z,1516720564.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:16:04.886Z,1516720564.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:05.261Z,1516720565.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:05.296Z,1516720565.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:16:05.297Z,1516720565.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:05.669Z,1516720565.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:05.689Z,1516720565.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:16:05.690Z,1516720565.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:06.070Z,1516720566.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:06.085Z,1516720566.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:16:06.086Z,1516720566.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:06.480Z,1516720566.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:06.503Z,1516720566.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:16:06.504Z,1516720566.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:06.884Z,1516720566.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:06.900Z,1516720566.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:16:06.901Z,1516720566.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:07.281Z,1516720567.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:07.296Z,1516720567.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:16:07.297Z,1516720567.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:07.660Z,1516720567.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:07.696Z,1516720567.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:16:07.697Z,1516720567.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:08.062Z,1516720568.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:08.093Z,1516720568.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:16:08.094Z,1516720568.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:08.461Z,1516720568.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:08.492Z,1516720568.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:16:08.493Z,1516720568.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:08.861Z,1516720568.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:08.904Z,1516720568.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:16:08.905Z,1516720568.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:09.272Z,1516720569.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:09.306Z,1516720569.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:16:09.307Z,1516720569.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:09.683Z,1516720569.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:09.711Z,1516720569.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:16:09.712Z,1516720569.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:10.079Z,1516720570.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:10.112Z,1516720570.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:16:10.113Z,1516720570.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:10.472Z,1516720570.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:10.510Z,1516720570.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:10.872Z,1516720570.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:10.915Z,1516720570.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:11.262Z,1516720571.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:11.277Z,1516720571.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:11.673Z,1516720571.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:11.688Z,1516720571.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:12.069Z,1516720572.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:12.084Z,1516720572.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:12.471Z,1516720572.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:12.487Z,1516720572.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:12.879Z,1516720572.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:12.894Z,1516720572.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:13.271Z,1516720573.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:13.292Z,1516720573.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:13.662Z,1516720573.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:13.690Z,1516720573.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:14.072Z,1516720574.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:14.087Z,1516720574.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:14.470Z,1516720574.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:14.485Z,1516720574.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:14.864Z,1516720574.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:14.884Z,1516720574.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:15.272Z,1516720575.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:15.302Z,1516720575.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:15.679Z,1516720575.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:15.694Z,1516720575.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:16.076Z,1516720576.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:16.091Z,1516720576.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:16.468Z,1516720576.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:16.483Z,1516720576.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:16.860Z,1516720576.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:16.875Z,1516720576.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:17.289Z,1516720577.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:17.308Z,1516720577.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:17.670Z,1516720577.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:17.685Z,1516720577.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:18.072Z,1516720578.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:18.087Z,1516720578.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:18.482Z,1516720578.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:18.513Z,1516720578.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:18.889Z,1516720578.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:18.922Z,1516720578.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:19.278Z,1516720579.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:19.293Z,1516720579.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:19.662Z,1516720579.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:19.695Z,1516720579.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:20.091Z,1516720580.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:20.135Z,1516720580.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:20.497Z,1516720580.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:20.568Z,1516720580.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:20.879Z,1516720580.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:20.922Z,1516720580.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:21.285Z,1516720581.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:21.337Z,1516720581.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:21.704Z,1516720581.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:21.741Z,1516720581.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:22.071Z,1516720582.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:22.086Z,1516720582.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:22.471Z,1516720582.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:22.493Z,1516720582.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:22.869Z,1516720582.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:22.888Z,1516720582.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:23.271Z,1516720583.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:23.301Z,1516720583.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:23.675Z,1516720583.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:23.701Z,1516720583.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:24.075Z,1516720584.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:24.134Z,1516720584.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:24.485Z,1516720584.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:24.509Z,1516720584.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:24.889Z,1516720584.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:24.921Z,1516720584.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:25.286Z,1516720585.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:25.342Z,1516720585.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:25.663Z,1516720585.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:25.723Z,1516720585.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:26.091Z,1516720586.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:26.119Z,1516720586.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:26.468Z,1516720586.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:26.525Z,1516720586.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:26.866Z,1516720586.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:26.905Z,1516720586.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:27.304Z,1516720587.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:27.327Z,1516720587.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:27.693Z,1516720587.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:27.767Z,1516720587.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:28.085Z,1516720588.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:28.121Z,1516720588.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:28.483Z,1516720588.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:28.522Z,1516720588.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:28.875Z,1516720588.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:28.903Z,1516720588.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:29.275Z,1516720589.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:29.298Z,1516720589.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:29.675Z,1516720589.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:29.701Z,1516720589.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:30.066Z,1516720590.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:30.132Z,1516720590.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:30.486Z,1516720590.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:30.513Z,1516720590.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:30.889Z,1516720590.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:30.917Z,1516720590.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:31.286Z,1516720591.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:31.313Z,1516720591.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:31.666Z,1516720591.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:31.712Z,1516720591.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:32.066Z,1516720592.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:32.109Z,1516720592.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:32.467Z,1516720592.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:32.507Z,1516720592.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:32.875Z,1516720592.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:32.913Z,1516720592.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:33.285Z,1516720593.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:33.324Z,1516720593.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:33.690Z,1516720593.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:33.733Z,1516720593.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:34.085Z,1516720594.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:34.122Z,1516720594.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:34.465Z,1516720594.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:34.501Z,1516720594.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:34.875Z,1516720594.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:34.901Z,1516720594.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:35.276Z,1516720595.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:35.303Z,1516720595.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:35.693Z,1516720595.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:35.738Z,1516720595.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:36.077Z,1516720596.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:36.101Z,1516720596.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:36.477Z,1516720596.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:36.553Z,1516720596.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:36.886Z,1516720596.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:36.925Z,1516720596.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:37.280Z,1516720597.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:37.324Z,1516720597.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:40.361Z,1516720600.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:40.376Z,1516720600.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:40.485Z,1516720600.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:40.521Z,1516720600.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:40.851Z,1516720600.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:40.879Z,1516720600.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:41.264Z,1516720601.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:41.279Z,1516720601.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:41.652Z,1516720601.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:41.689Z,1516720601.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:42.046Z,1516720602.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:42.072Z,1516720602.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:42.446Z,1516720602.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:42.474Z,1516720602.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:42.835Z,1516720602.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:42.870Z,1516720602.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:43.247Z,1516720603.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:43.281Z,1516720603.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:43.651Z,1516720603.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:43.689Z,1516720603.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:44.048Z,1516720604.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:44.076Z,1516720604.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:44.438Z,1516720604.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:44.482Z,1516720604.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:44.836Z,1516720604.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:44.883Z,1516720604.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:45.252Z,1516720605.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:45.285Z,1516720605.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:45.652Z,1516720605.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:45.686Z,1516720605.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:46.047Z,1516720606.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:46.076Z,1516720606.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:46.438Z,1516720606.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:46.453Z,1516720606.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:46.837Z,1516720606.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:46.857Z,1516720606.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:47.255Z,1516720607.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:47.284Z,1516720607.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:47.652Z,1516720607.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:47.687Z,1516720607.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:48.051Z,1516720608.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:48.075Z,1516720608.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:48.441Z,1516720608.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:48.468Z,1516720608.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:48.838Z,1516720608.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:48.862Z,1516720608.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:49.251Z,1516720609.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:49.267Z,1516720609.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:49.651Z,1516720609.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:49.666Z,1516720609.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:50.048Z,1516720610.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:50.063Z,1516720610.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:50.442Z,1516720610.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:50.465Z,1516720610.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:50.849Z,1516720610.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:50.864Z,1516720610.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:51.250Z,1516720611.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:51.273Z,1516720611.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:51.654Z,1516720611.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:51.673Z,1516720611.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:52.055Z,1516720612.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:52.076Z,1516720612.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:52.450Z,1516720612.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:52.465Z,1516720612.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:52.842Z,1516720612.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:52.866Z,1516720612.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:53.254Z,1516720613.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:53.276Z,1516720613.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:53.693Z,1516720613.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:53.721Z,1516720613.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:54.056Z,1516720614.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:54.071Z,1516720614.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:54.437Z,1516720614.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:54.474Z,1516720614.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:54.834Z,1516720614.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:54.862Z,1516720614.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:55.259Z,1516720615.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:55.274Z,1516720615.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:55.660Z,1516720615.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:55.674Z,1516720615.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:56.059Z,1516720616.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:56.074Z,1516720616.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:56.437Z,1516720616.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:56.469Z,1516720616.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:56.836Z,1516720616.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:56.874Z,1516720616.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:57.260Z,1516720617.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:57.281Z,1516720617.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:57.656Z,1516720617.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:57.678Z,1516720617.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:58.047Z,1516720618.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:58.075Z,1516720618.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:58.437Z,1516720618.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:58.469Z,1516720618.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:58.840Z,1516720618.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:58.877Z,1516720618.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:59.248Z,1516720619.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:59.285Z,1516720619.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:16:59.655Z,1516720619.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:16:59.686Z,1516720619.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:00.059Z,1516720620.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:00.090Z,1516720620.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:00.446Z,1516720620.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:00.461Z,1516720620.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:00.840Z,1516720620.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:00.869Z,1516720620.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:01.250Z,1516720621.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:01.265Z,1516720621.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:01.651Z,1516720621.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:01.666Z,1516720621.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:02.052Z,1516720622.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:02.067Z,1516720622.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:02.445Z,1516720622.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:02.460Z,1516720622.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:02.846Z,1516720622.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:02.861Z,1516720622.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:03.240Z,1516720623.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:03.271Z,1516720623.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:03.654Z,1516720623.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:03.669Z,1516720623.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:04.054Z,1516720624.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:04.076Z,1516720624.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:04.455Z,1516720624.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:04.470Z,1516720624.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:04.895Z,1516720624.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:04.910Z,1516720624.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:05.241Z,1516720625.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:05.269Z,1516720625.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:05.650Z,1516720625.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:05.665Z,1516720625.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:06.052Z,1516720626.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:06.073Z,1516720626.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:06.455Z,1516720626.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:06.470Z,1516720626.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:06.852Z,1516720626.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:06.875Z,1516720626.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:07.255Z,1516720627.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:07.270Z,1516720627.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:07.641Z,1516720627.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:07.665Z,1516720627.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:08.040Z,1516720628.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:08.063Z,1516720628.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:08.443Z,1516720628.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:08.463Z,1516720628.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:08.841Z,1516720628.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:08.868Z,1516720628.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:09.236Z,1516720629.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:09.269Z,1516720629.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:09.660Z,1516720629.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:09.674Z,1516720629.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:10.059Z,1516720630.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:10.080Z,1516720630.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:10.447Z,1516720630.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:10.485Z,1516720630.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:10.840Z,1516720630.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:10.877Z,1516720630.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:11.245Z,1516720631.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:11.277Z,1516720631.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:11.646Z,1516720631.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:11.661Z,1516720631.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:12.042Z,1516720632.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:12.057Z,1516720632.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:12.456Z,1516720632.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:12.491Z,1516720632.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:12.847Z,1516720632.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:12.863Z,1516720632.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:13.248Z,1516720633.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:13.269Z,1516720633.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:13.646Z,1516720633.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:13.662Z,1516720633.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:14.044Z,1516720634.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:14.060Z,1516720634.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:14.444Z,1516720634.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:14.459Z,1516720634.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:14.842Z,1516720634.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:14.862Z,1516720634.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:15.244Z,1516720635.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:15.260Z,1516720635.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:15.664Z,1516720635.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:15.694Z,1516720635.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:16.052Z,1516720636.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:16.067Z,1516720636.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:16.450Z,1516720636.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:16.466Z,1516720636.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:16.845Z,1516720636.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:16.865Z,1516720636.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:17.249Z,1516720637.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:17.265Z,1516720637.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:17.644Z,1516720637.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:17.672Z,1516720637.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:18.047Z,1516720638.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:18.069Z,1516720638.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:18.464Z,1516720638.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:18.496Z,1516720638.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:18.855Z,1516720638.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:18.870Z,1516720638.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:19.252Z,1516720639.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:19.266Z,1516720639.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:19.645Z,1516720639.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:19.673Z,1516720639.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:20.044Z,1516720640.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:20.064Z,1516720640.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:20.447Z,1516720640.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:20.469Z,1516720640.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:20.855Z,1516720640.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:20.870Z,1516720640.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:21.254Z,1516720641.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:21.269Z,1516720641.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:21.656Z,1516720641.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:21.677Z,1516720641.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:22.059Z,1516720642.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:22.080Z,1516720642.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:22.455Z,1516720642.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:22.474Z,1516720642.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:22.846Z,1516720642.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:22.869Z,1516720642.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:23.244Z,1516720643.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:23.272Z,1516720643.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:23.642Z,1516720643.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:23.669Z,1516720643.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:24.036Z,1516720644.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:24.075Z,1516720644.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:24.458Z,1516720644.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:24.474Z,1516720644.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:24.859Z,1516720644.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:24.880Z,1516720644.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:25.264Z,1516720645.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:25.279Z,1516720645.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:25.637Z,1516720645.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:25.666Z,1516720645.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:26.037Z,1516720646.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:26.069Z,1516720646.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:26.436Z,1516720646.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:26.463Z,1516720646.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:26.837Z,1516720646.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:26.877Z,1516720646.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:27.236Z,1516720647.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:27.263Z,1516720647.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:27.653Z,1516720647.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:27.688Z,1516720647.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:28.064Z,1516720648.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:28.079Z,1516720648.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:28.447Z,1516720648.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:28.481Z,1516720648.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:28.836Z,1516720648.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:28.873Z,1516720648.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:29.236Z,1516720649.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:29.274Z,1516720649.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:29.637Z,1516720649.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:29.669Z,1516720649.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:30.040Z,1516720650.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:30.077Z,1516720650.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:30.451Z,1516720650.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:30.479Z,1516720650.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:30.855Z,1516720650.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:30.882Z,1516720650.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:31.247Z,1516720651.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:31.284Z,1516720651.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:31.636Z,1516720651.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:31.652Z,1516720651.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:32.040Z,1516720652.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:32.057Z,1516720652.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:32.441Z,1516720652.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:32.456Z,1516720652.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:32.849Z,1516720652.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:32.864Z,1516720652.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:33.244Z,1516720653.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:33.265Z,1516720653.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:33.661Z,1516720653.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:33.689Z,1516720653.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:34.055Z,1516720654.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:34.070Z,1516720654.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:34.456Z,1516720654.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:34.487Z,1516720654.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:34.845Z,1516720654.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:34.861Z,1516720654.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:35.245Z,1516720655.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:35.260Z,1516720655.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:35.647Z,1516720655.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:35.662Z,1516720655.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:36.042Z,1516720656.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:36.065Z,1516720656.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:36.451Z,1516720656.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:36.466Z,1516720656.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:36.852Z,1516720656.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:36.867Z,1516720656.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:37.250Z,1516720657.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:37.273Z,1516720657.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:37.646Z,1516720657.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:37.661Z,1516720657.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:40.754Z,1516720660.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:40.777Z,1516720660.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:40.881Z,1516720660.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:40.925Z,1516720660.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:41.271Z,1516720661.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:41.305Z,1516720661.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:41.675Z,1516720661.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:41.700Z,1516720661.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:42.075Z,1516720662.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:42.099Z,1516720662.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:42.464Z,1516720662.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:42.479Z,1516720662.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:42.860Z,1516720662.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:42.876Z,1516720662.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:43.257Z,1516720663.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:43.276Z,1516720663.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:43.663Z,1516720663.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:43.678Z,1516720663.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:44.067Z,1516720664.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:44.082Z,1516720664.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:44.475Z,1516720664.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:44.506Z,1516720664.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:44.860Z,1516720664.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:44.880Z,1516720664.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:45.262Z,1516720665.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:45.277Z,1516720665.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:45.662Z,1516720665.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:45.677Z,1516720665.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:46.058Z,1516720666.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:46.085Z,1516720666.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:46.475Z,1516720666.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:46.507Z,1516720666.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:46.868Z,1516720666.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:46.905Z,1516720666.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:47.275Z,1516720667.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:47.290Z,1516720667.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:47.662Z,1516720667.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:47.678Z,1516720667.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:48.060Z,1516720668.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:48.075Z,1516720668.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:48.460Z,1516720668.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:48.480Z,1516720668.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:48.862Z,1516720668.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:48.878Z,1516720668.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:49.258Z,1516720669.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:49.278Z,1516720669.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:49.672Z,1516720669.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:49.687Z,1516720669.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:50.074Z,1516720670.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:50.089Z,1516720670.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:50.471Z,1516720670.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:50.485Z,1516720670.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:50.863Z,1516720670.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:50.884Z,1516720670.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:51.265Z,1516720671.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:51.285Z,1516720671.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:51.655Z,1516720671.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:51.689Z,1516720671.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:52.056Z,1516720672.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:52.084Z,1516720672.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:52.476Z,1516720672.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:52.491Z,1516720672.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:52.882Z,1516720672.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:52.897Z,1516720672.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:53.273Z,1516720673.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:53.287Z,1516720673.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:53.655Z,1516720673.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:53.685Z,1516720673.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:54.053Z,1516720674.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:54.089Z,1516720674.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:54.457Z,1516720674.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:54.485Z,1516720674.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:54.858Z,1516720674.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:54.885Z,1516720674.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:55.261Z,1516720675.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:55.288Z,1516720675.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:55.673Z,1516720675.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:55.688Z,1516720675.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:56.080Z,1516720676.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:56.095Z,1516720676.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:56.468Z,1516720676.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:56.497Z,1516720676.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:56.853Z,1516720676.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:56.887Z,1516720676.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:57.253Z,1516720677.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:57.268Z,1516720677.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:57.658Z,1516720677.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:57.673Z,1516720677.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:58.060Z,1516720678.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:58.075Z,1516720678.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:58.471Z,1516720678.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:58.496Z,1516720678.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:58.886Z,1516720678.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:58.908Z,1516720678.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:59.275Z,1516720679.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:59.299Z,1516720679.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:17:59.676Z,1516720679.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:17:59.701Z,1516720679.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:00.062Z,1516720680.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:00.077Z,1516720680.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:00.459Z,1516720680.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:00.474Z,1516720680.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:00.858Z,1516720680.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:00.873Z,1516720680.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:01.259Z,1516720681.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:01.281Z,1516720681.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:01.669Z,1516720681.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:01.684Z,1516720681.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:02.069Z,1516720682.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:02.089Z,1516720682.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:02.466Z,1516720682.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:02.482Z,1516720682.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:02.861Z,1516720682.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:02.878Z,1516720682.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:03.260Z,1516720683.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:03.277Z,1516720683.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:03.661Z,1516720683.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:03.677Z,1516720683.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:04.061Z,1516720684.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:04.076Z,1516720684.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:04.465Z,1516720684.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:04.485Z,1516720684.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:04.868Z,1516720684.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:04.882Z,1516720684.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:05.267Z,1516720685.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:05.282Z,1516720685.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:05.660Z,1516720685.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:05.679Z,1516720685.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:06.060Z,1516720686.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:06.081Z,1516720686.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:06.461Z,1516720686.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:06.476Z,1516720686.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:06.857Z,1516720686.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:06.877Z,1516720686.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:07.260Z,1516720687.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:07.275Z,1516720687.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:07.666Z,1516720687.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:07.688Z,1516720687.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:08.071Z,1516720688.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:08.086Z,1516720688.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:08.470Z,1516720688.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:08.485Z,1516720688.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:08.861Z,1516720688.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:08.876Z,1516720688.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:09.256Z,1516720689.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:09.276Z,1516720689.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:09.656Z,1516720689.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:09.683Z,1516720689.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:10.060Z,1516720690.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:10.088Z,1516720690.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:10.471Z,1516720690.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:10.486Z,1516720690.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:10.873Z,1516720690.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:10.888Z,1516720690.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:11.274Z,1516720691.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:11.289Z,1516720691.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:11.655Z,1516720691.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:11.681Z,1516720691.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:12.064Z,1516720692.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:12.083Z,1516720692.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:12.452Z,1516720692.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:12.486Z,1516720692.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:12.853Z,1516720692.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:12.880Z,1516720692.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:13.252Z,1516720693.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:13.285Z,1516720693.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:13.672Z,1516720693.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:13.686Z,1516720693.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:14.075Z,1516720694.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:14.090Z,1516720694.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:14.472Z,1516720694.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:14.486Z,1516720694.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:14.852Z,1516720694.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:14.880Z,1516720694.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:15.250Z,1516720695.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:15.286Z,1516720695.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:15.654Z,1516720695.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:15.685Z,1516720695.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:16.052Z,1516720696.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:16.081Z,1516720696.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:16.471Z,1516720696.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:16.487Z,1516720696.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:16.875Z,1516720696.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:16.890Z,1516720696.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:17.269Z,1516720697.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:17.296Z,1516720697.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:17.653Z,1516720697.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:17.685Z,1516720697.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:18.056Z,1516720698.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:18.089Z,1516720698.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:18.452Z,1516720698.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:18.490Z,1516720698.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:18.851Z,1516720698.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:18.866Z,1516720698.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:19.252Z,1516720699.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:19.289Z,1516720699.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:19.671Z,1516720699.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:19.699Z,1516720699.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:20.067Z,1516720700.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:20.093Z,1516720700.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:20.463Z,1516720700.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:20.497Z,1516720700.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:20.860Z,1516720700.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:20.875Z,1516720700.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:21.251Z,1516720701.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:21.273Z,1516720701.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:21.658Z,1516720701.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:21.673Z,1516720701.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:22.064Z,1516720702.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:22.079Z,1516720702.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:22.468Z,1516720702.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:22.499Z,1516720702.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:22.872Z,1516720702.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:22.886Z,1516720702.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:23.263Z,1516720703.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:23.284Z,1516720703.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:23.658Z,1516720703.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:23.674Z,1516720703.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:24.058Z,1516720704.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:24.081Z,1516720704.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:24.464Z,1516720704.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:24.479Z,1516720704.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:24.861Z,1516720704.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:24.876Z,1516720704.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:25.260Z,1516720705.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:25.275Z,1516720705.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:25.666Z,1516720705.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:25.688Z,1516720705.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:26.068Z,1516720706.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:26.083Z,1516720706.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:26.466Z,1516720706.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:26.488Z,1516720706.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:26.861Z,1516720706.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:26.876Z,1516720706.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:27.256Z,1516720707.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:27.278Z,1516720707.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:27.656Z,1516720707.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:27.678Z,1516720707.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:28.061Z,1516720708.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:28.076Z,1516720708.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:28.470Z,1516720708.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:28.486Z,1516720708.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:28.871Z,1516720708.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:28.894Z,1516720708.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:29.272Z,1516720709.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:29.287Z,1516720709.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:29.650Z,1516720709.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:29.678Z,1516720709.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:30.056Z,1516720710.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:30.082Z,1516720710.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:30.452Z,1516720710.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:30.486Z,1516720710.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:30.857Z,1516720710.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:30.884Z,1516720710.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:31.252Z,1516720711.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:31.289Z,1516720711.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:31.680Z,1516720711.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:31.695Z,1516720711.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:32.078Z,1516720712.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:32.093Z,1516720712.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:32.480Z,1516720712.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:32.495Z,1516720712.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:32.853Z,1516720712.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:32.890Z,1516720712.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:33.251Z,1516720713.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:33.266Z,1516720713.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:33.657Z,1516720713.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:33.688Z,1516720713.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:34.057Z,1516720714.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:34.071Z,1516720714.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:34.464Z,1516720714.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:34.492Z,1516720714.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:34.876Z,1516720714.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:34.902Z,1516720714.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:35.267Z,1516720715.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:35.298Z,1516720715.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:35.655Z,1516720715.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:35.671Z,1516720715.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:36.064Z,1516720716.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:36.105Z,1516720716.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:36.461Z,1516720716.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:36.476Z,1516720716.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:36.479Z,1516720716.479 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:18:36.479Z,1516720716.479 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:18:36.479Z,1516720716.479 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:18:36.479Z,1516720716.479 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:18:36.858Z,1516720716.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:36.881Z,1516720716.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:36.889Z,1516720716.889 [Default:CheckIn:D] Stopped 2018-01-23T15:18:36.889Z,1516720716.889 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:18:37.262Z,1516720717.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:37.281Z,1516720717.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 720.747135 min 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn:E] Stopped 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn] Stopped 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn](INFO): Running loop #71 2018-01-23T15:18:37.285Z,1516720717.285 [Default:CheckIn] Running Loop=71 2018-01-23T15:18:37.286Z,1516720717.286 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:18:37.286Z,1516720717.286 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:18:37.671Z,1516720717.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:37.686Z,1516720717.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:40.775Z,1516720720.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:40.791Z,1516720720.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:40.793Z,1516720720.793 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:40.793Z,1516720720.793 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 240 2018-01-23T15:18:40.793Z,1516720720.793 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:18:40.830Z,1516720720.830 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:18:40.921Z,1516720720.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:40.937Z,1516720720.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:40.950Z,1516720720.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:18:40.950Z,1516720720.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 240 2018-01-23T15:18:41.275Z,1516720721.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:41.290Z,1516720721.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:41.292Z,1516720721.292 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:18:41.292Z,1516720721.292 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:18:41.292Z,1516720721.292 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:18:41.680Z,1516720721.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:41.709Z,1516720721.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:42.076Z,1516720722.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:42.093Z,1516720722.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:42.484Z,1516720722.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:42.505Z,1516720722.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:42.881Z,1516720722.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:42.898Z,1516720722.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:43.282Z,1516720723.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:43.298Z,1516720723.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:43.673Z,1516720723.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:43.700Z,1516720723.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:44.068Z,1516720724.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:44.102Z,1516720724.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:44.464Z,1516720724.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:44.491Z,1516720724.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:44.865Z,1516720724.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:44.898Z,1516720724.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:45.264Z,1516720725.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:45.301Z,1516720725.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:45.691Z,1516720725.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:45.706Z,1516720725.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:46.085Z,1516720726.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:46.116Z,1516720726.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:46.487Z,1516720726.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:46.503Z,1516720726.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:46.864Z,1516720726.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:46.891Z,1516720726.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:47.265Z,1516720727.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:47.301Z,1516720727.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:47.669Z,1516720727.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:47.708Z,1516720727.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:48.064Z,1516720728.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:48.079Z,1516720728.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:48.475Z,1516720728.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:48.506Z,1516720728.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:48.887Z,1516720728.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:48.920Z,1516720728.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:49.283Z,1516720729.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:49.309Z,1516720729.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:49.677Z,1516720729.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:49.714Z,1516720729.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:50.068Z,1516720730.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:50.089Z,1516720730.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:50.476Z,1516720730.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:50.491Z,1516720730.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:50.870Z,1516720730.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:50.897Z,1516720730.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:50.898Z,1516720730.898 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:50.903Z,1516720730.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 240 2018-01-23T15:18:50.903Z,1516720730.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:18:50.928Z,1516720730.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:18:51.272Z,1516720731.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:51.287Z,1516720731.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:51.299Z,1516720731.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:18:51.299Z,1516720731.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 240 2018-01-23T15:18:51.683Z,1516720731.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:51.698Z,1516720731.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:51.698Z,1516720731.698 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 240 2018-01-23T15:18:51.699Z,1516720731.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:18:51.700Z,1516720731.700 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:18:51.700Z,1516720731.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:18:51.701Z,1516720731.701 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:18:51.733Z,1516720731.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:18:52.082Z,1516720732.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:52.109Z,1516720732.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:18:52.109Z,1516720732.109 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 240 2018-01-23T15:18:52.482Z,1516720732.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:52.496Z,1516720732.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:18:52.497Z,1516720732.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:18:52.497Z,1516720732.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:18:52.876Z,1516720732.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:52.891Z,1516720732.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:18:52.892Z,1516720732.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:53.281Z,1516720733.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:53.296Z,1516720733.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:18:53.297Z,1516720733.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:53.682Z,1516720733.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:53.697Z,1516720733.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:18:53.698Z,1516720733.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:54.072Z,1516720734.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:54.090Z,1516720734.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:18:54.091Z,1516720734.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:54.482Z,1516720734.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:54.503Z,1516720734.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:18:54.504Z,1516720734.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:54.887Z,1516720734.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:54.902Z,1516720734.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:18:54.903Z,1516720734.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:55.283Z,1516720735.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:55.298Z,1516720735.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:18:55.299Z,1516720735.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:55.676Z,1516720735.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:55.698Z,1516720735.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:18:55.704Z,1516720735.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:56.076Z,1516720736.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:56.095Z,1516720736.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:18:56.096Z,1516720736.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:56.487Z,1516720736.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:56.502Z,1516720736.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:18:56.504Z,1516720736.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:56.891Z,1516720736.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:56.905Z,1516720736.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:18:56.906Z,1516720736.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:57.282Z,1516720737.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:57.297Z,1516720737.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:18:57.298Z,1516720737.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:57.665Z,1516720737.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:57.700Z,1516720737.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:18:57.701Z,1516720737.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:58.082Z,1516720738.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:58.096Z,1516720738.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:18:58.097Z,1516720738.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:58.487Z,1516720738.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:58.501Z,1516720738.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:18:58.502Z,1516720738.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:58.886Z,1516720738.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:58.901Z,1516720738.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:18:58.902Z,1516720738.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:59.284Z,1516720739.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:59.299Z,1516720739.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:18:59.300Z,1516720739.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:18:59.680Z,1516720739.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:18:59.701Z,1516720739.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:18:59.702Z,1516720739.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:00.076Z,1516720740.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:00.091Z,1516720740.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:19:00.092Z,1516720740.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:00.480Z,1516720740.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:00.502Z,1516720740.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:19:00.508Z,1516720740.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:00.891Z,1516720740.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:00.906Z,1516720740.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:19:00.907Z,1516720740.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:01.286Z,1516720741.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:01.301Z,1516720741.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:19:01.302Z,1516720741.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:01.687Z,1516720741.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:01.702Z,1516720741.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:19:01.703Z,1516720741.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:02.064Z,1516720742.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:02.091Z,1516720742.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:19:02.092Z,1516720742.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:02.490Z,1516720742.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:02.505Z,1516720742.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:19:02.507Z,1516720742.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:02.884Z,1516720742.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:02.906Z,1516720742.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:19:02.912Z,1516720742.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:03.291Z,1516720743.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:03.306Z,1516720743.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:19:03.307Z,1516720743.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:03.669Z,1516720743.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:03.700Z,1516720743.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:19:03.701Z,1516720743.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:04.065Z,1516720744.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:04.096Z,1516720744.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:19:04.097Z,1516720744.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:04.476Z,1516720744.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:04.513Z,1516720744.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:19:04.514Z,1516720744.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:04.895Z,1516720744.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:04.910Z,1516720744.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:19:04.911Z,1516720744.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:05.296Z,1516720745.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:05.311Z,1516720745.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:19:05.312Z,1516720745.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:05.673Z,1516720745.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:05.700Z,1516720745.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:19:05.701Z,1516720745.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:06.066Z,1516720746.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:06.093Z,1516720746.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:19:06.094Z,1516720746.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:06.479Z,1516720746.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:06.515Z,1516720746.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:19:06.516Z,1516720746.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:06.891Z,1516720746.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:06.907Z,1516720746.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:19:06.908Z,1516720746.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:07.275Z,1516720747.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:07.308Z,1516720747.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:19:07.309Z,1516720747.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:07.671Z,1516720747.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:07.702Z,1516720747.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:19:07.707Z,1516720747.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:08.070Z,1516720748.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:08.085Z,1516720748.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:19:08.086Z,1516720748.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:08.483Z,1516720748.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:08.509Z,1516720748.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:19:08.510Z,1516720748.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:08.901Z,1516720748.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:08.920Z,1516720748.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:19:08.921Z,1516720748.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:09.280Z,1516720749.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:09.313Z,1516720749.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:19:09.314Z,1516720749.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:09.677Z,1516720749.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:09.692Z,1516720749.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:19:09.693Z,1516720749.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:10.073Z,1516720750.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:10.088Z,1516720750.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:19:10.089Z,1516720750.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:10.483Z,1516720750.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:10.498Z,1516720750.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:19:10.499Z,1516720750.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:10.881Z,1516720750.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:10.896Z,1516720750.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:19:10.897Z,1516720750.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:11.280Z,1516720751.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:11.303Z,1516720751.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:19:11.304Z,1516720751.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:11.680Z,1516720751.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:11.701Z,1516720751.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:12.079Z,1516720752.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:12.094Z,1516720752.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:12.482Z,1516720752.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:12.509Z,1516720752.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:12.887Z,1516720752.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:12.902Z,1516720752.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:13.286Z,1516720753.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:13.301Z,1516720753.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:13.686Z,1516720753.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:13.701Z,1516720753.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:14.068Z,1516720754.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:14.098Z,1516720754.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:14.485Z,1516720754.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:14.501Z,1516720754.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:14.884Z,1516720754.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:14.911Z,1516720754.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:15.292Z,1516720755.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:15.307Z,1516720755.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:15.670Z,1516720755.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:15.700Z,1516720755.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:16.067Z,1516720756.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:16.098Z,1516720756.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:16.476Z,1516720756.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:16.514Z,1516720756.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:16.896Z,1516720756.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:16.912Z,1516720756.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:17.277Z,1516720757.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:17.306Z,1516720757.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:17.672Z,1516720757.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:17.700Z,1516720757.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:18.068Z,1516720758.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:18.084Z,1516720758.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:18.483Z,1516720758.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:18.512Z,1516720758.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:18.886Z,1516720758.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:18.924Z,1516720758.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:19.286Z,1516720759.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:19.314Z,1516720759.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:19.681Z,1516720759.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:19.714Z,1516720759.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:20.070Z,1516720760.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:20.086Z,1516720760.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:20.481Z,1516720760.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:20.519Z,1516720760.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:20.890Z,1516720760.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:20.921Z,1516720760.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:21.277Z,1516720761.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:21.294Z,1516720761.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:21.679Z,1516720761.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:21.696Z,1516720761.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:22.073Z,1516720762.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:22.105Z,1516720762.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:22.484Z,1516720762.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:22.492Z,1516720762.492 [PNI_TCM](ERROR): CRC does not match. Expected:0x29587 got:0x6466 2018-01-23T15:19:22.536Z,1516720762.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:22.885Z,1516720762.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:22.901Z,1516720762.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:23.279Z,1516720763.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:23.302Z,1516720763.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:23.676Z,1516720763.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:23.700Z,1516720763.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:24.073Z,1516720764.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:24.091Z,1516720764.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:24.486Z,1516720764.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:24.501Z,1516720764.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:24.886Z,1516720764.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:24.902Z,1516720764.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:25.283Z,1516720765.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:25.301Z,1516720765.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:25.673Z,1516720765.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:25.701Z,1516720765.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:26.068Z,1516720766.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:26.105Z,1516720766.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:26.487Z,1516720766.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:26.502Z,1516720766.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:26.883Z,1516720766.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:26.909Z,1516720766.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:27.281Z,1516720767.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:27.320Z,1516720767.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x28764 got:0x15585 2018-01-23T15:19:27.358Z,1516720767.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:27.675Z,1516720767.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:27.691Z,1516720767.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:28.071Z,1516720768.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:28.098Z,1516720768.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:28.482Z,1516720768.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:28.523Z,1516720768.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:28.883Z,1516720768.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:28.892Z,1516720768.892 [PNI_TCM](ERROR): CRC does not match. Expected:0x13695 got:0x11544 2018-01-23T15:19:28.927Z,1516720768.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:29.284Z,1516720769.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:29.299Z,1516720769.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:29.674Z,1516720769.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:29.707Z,1516720769.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:30.076Z,1516720770.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:30.109Z,1516720770.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:30.483Z,1516720770.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:30.509Z,1516720770.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:30.884Z,1516720770.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:30.905Z,1516720770.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:31.286Z,1516720771.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:31.301Z,1516720771.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:31.677Z,1516720771.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:31.704Z,1516720771.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:32.072Z,1516720772.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:32.097Z,1516720772.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:32.472Z,1516720772.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:32.491Z,1516720772.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:32.886Z,1516720772.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:32.901Z,1516720772.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:33.286Z,1516720773.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:33.326Z,1516720773.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:33.683Z,1516720773.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:33.701Z,1516720773.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:34.074Z,1516720774.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:34.096Z,1516720774.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:34.480Z,1516720774.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:34.501Z,1516720774.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:34.873Z,1516720774.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:34.909Z,1516720774.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:35.277Z,1516720775.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:35.300Z,1516720775.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:35.688Z,1516720775.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:35.704Z,1516720775.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:36.088Z,1516720776.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:36.103Z,1516720776.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:36.483Z,1516720776.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:36.514Z,1516720776.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:36.864Z,1516720776.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:36.892Z,1516720776.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:37.264Z,1516720777.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:37.301Z,1516720777.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:37.674Z,1516720777.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:37.703Z,1516720777.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:40.763Z,1516720780.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:40.794Z,1516720780.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:40.891Z,1516720780.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:40.906Z,1516720780.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:41.272Z,1516720781.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:41.317Z,1516720781.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:41.675Z,1516720781.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:41.711Z,1516720781.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:42.068Z,1516720782.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:42.104Z,1516720782.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:42.457Z,1516720782.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:42.473Z,1516720782.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:42.856Z,1516720782.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:42.883Z,1516720782.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:43.256Z,1516720783.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:43.271Z,1516720783.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:43.662Z,1516720783.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:43.677Z,1516720783.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:44.063Z,1516720784.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:44.078Z,1516720784.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:44.461Z,1516720784.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:44.481Z,1516720784.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:44.852Z,1516720784.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:44.874Z,1516720784.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:45.257Z,1516720785.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:45.273Z,1516720785.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:45.653Z,1516720785.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:45.675Z,1516720785.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:46.053Z,1516720786.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:46.083Z,1516720786.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:46.457Z,1516720786.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:46.473Z,1516720786.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:46.867Z,1516720786.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:46.882Z,1516720786.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:47.265Z,1516720787.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:47.285Z,1516720787.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:47.665Z,1516720787.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:47.693Z,1516720787.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:48.052Z,1516720788.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:48.074Z,1516720788.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:48.451Z,1516720788.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:48.484Z,1516720788.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:48.853Z,1516720788.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:48.884Z,1516720788.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:49.249Z,1516720789.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:49.281Z,1516720789.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:49.664Z,1516720789.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:49.691Z,1516720789.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:50.076Z,1516720790.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:50.091Z,1516720790.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:50.472Z,1516720790.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:50.487Z,1516720790.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:50.849Z,1516720790.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:50.886Z,1516720790.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:51.249Z,1516720791.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:51.287Z,1516720791.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:51.649Z,1516720791.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:51.681Z,1516720791.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:52.050Z,1516720792.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:52.081Z,1516720792.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:52.449Z,1516720792.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:52.492Z,1516720792.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:52.860Z,1516720792.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:52.887Z,1516720792.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:53.262Z,1516720793.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:53.293Z,1516720793.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:53.661Z,1516720793.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:53.692Z,1516720793.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:54.049Z,1516720794.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:54.080Z,1516720794.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:54.449Z,1516720794.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:54.464Z,1516720794.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:54.851Z,1516720794.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:54.866Z,1516720794.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:55.254Z,1516720795.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:55.269Z,1516720795.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:55.671Z,1516720795.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:55.698Z,1516720795.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:56.075Z,1516720796.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:56.109Z,1516720796.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:56.472Z,1516720796.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:56.498Z,1516720796.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:56.862Z,1516720796.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:56.877Z,1516720796.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:57.258Z,1516720797.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:57.274Z,1516720797.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:57.656Z,1516720797.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:57.673Z,1516720797.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:58.054Z,1516720798.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:58.077Z,1516720798.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:58.457Z,1516720798.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:58.473Z,1516720798.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:58.862Z,1516720798.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:58.878Z,1516720798.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:59.263Z,1516720799.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:59.279Z,1516720799.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:19:59.666Z,1516720799.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:19:59.685Z,1516720799.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:00.064Z,1516720800.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:00.080Z,1516720800.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:00.453Z,1516720800.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:00.474Z,1516720800.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:00.858Z,1516720800.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:00.880Z,1516720800.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:01.256Z,1516720801.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:01.271Z,1516720801.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:01.662Z,1516720801.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:01.693Z,1516720801.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:02.070Z,1516720802.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:02.085Z,1516720802.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:02.467Z,1516720802.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:02.482Z,1516720802.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:02.851Z,1516720802.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:02.877Z,1516720802.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:03.257Z,1516720803.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:03.276Z,1516720803.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:03.657Z,1516720803.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:03.677Z,1516720803.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:04.051Z,1516720804.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:04.084Z,1516720804.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:04.456Z,1516720804.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:04.471Z,1516720804.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:04.867Z,1516720804.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:04.882Z,1516720804.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:05.267Z,1516720805.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:05.290Z,1516720805.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:05.671Z,1516720805.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:05.692Z,1516720805.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:06.060Z,1516720806.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:06.081Z,1516720806.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:06.448Z,1516720806.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:06.480Z,1516720806.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:06.849Z,1516720806.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:06.885Z,1516720806.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:07.260Z,1516720807.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:07.279Z,1516720807.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:07.664Z,1516720807.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:07.691Z,1516720807.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:08.072Z,1516720808.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:08.087Z,1516720808.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:08.467Z,1516720808.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:08.482Z,1516720808.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:08.849Z,1516720808.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:08.884Z,1516720808.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:09.248Z,1516720809.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:09.286Z,1516720809.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:09.653Z,1516720809.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:09.685Z,1516720809.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:10.049Z,1516720810.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:10.077Z,1516720810.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:10.448Z,1516720810.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:10.487Z,1516720810.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:10.859Z,1516720810.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:10.886Z,1516720810.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:11.264Z,1516720811.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:11.298Z,1516720811.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:11.659Z,1516720811.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:11.692Z,1516720811.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:12.052Z,1516720812.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:12.088Z,1516720812.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:12.448Z,1516720812.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:12.485Z,1516720812.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:12.853Z,1516720812.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:12.868Z,1516720812.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:13.252Z,1516720813.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:13.289Z,1516720813.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:13.698Z,1516720813.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:13.721Z,1516720813.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:14.067Z,1516720814.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:14.095Z,1516720814.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:14.467Z,1516720814.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:14.494Z,1516720814.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:14.860Z,1516720814.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:14.896Z,1516720814.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:15.252Z,1516720815.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:15.267Z,1516720815.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:15.657Z,1516720815.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:15.672Z,1516720815.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:16.056Z,1516720816.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:16.071Z,1516720816.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:16.453Z,1516720816.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:16.480Z,1516720816.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:16.859Z,1516720816.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:16.875Z,1516720816.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:17.263Z,1516720817.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:17.278Z,1516720817.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:17.659Z,1516720817.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:17.680Z,1516720817.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:18.058Z,1516720818.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:18.073Z,1516720818.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:18.454Z,1516720818.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:18.478Z,1516720818.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:18.861Z,1516720818.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:18.876Z,1516720818.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:19.256Z,1516720819.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:19.277Z,1516720819.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:19.662Z,1516720819.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:19.677Z,1516720819.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:20.067Z,1516720820.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:20.088Z,1516720820.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:20.466Z,1516720820.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:20.489Z,1516720820.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:20.861Z,1516720820.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:20.875Z,1516720820.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:21.255Z,1516720821.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:21.281Z,1516720821.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:21.657Z,1516720821.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:21.677Z,1516720821.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:22.056Z,1516720822.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:22.075Z,1516720822.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:22.456Z,1516720822.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:22.476Z,1516720822.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:22.870Z,1516720822.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:22.885Z,1516720822.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:23.270Z,1516720823.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:23.289Z,1516720823.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:23.671Z,1516720823.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:23.692Z,1516720823.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:24.060Z,1516720824.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:24.081Z,1516720824.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:24.460Z,1516720824.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:24.481Z,1516720824.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:24.858Z,1516720824.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:24.873Z,1516720824.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:25.253Z,1516720825.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:25.285Z,1516720825.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:25.659Z,1516720825.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:25.694Z,1516720825.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:26.072Z,1516720826.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:26.087Z,1516720826.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:26.459Z,1516720826.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:26.497Z,1516720826.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:26.852Z,1516720826.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:26.889Z,1516720826.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:27.248Z,1516720827.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:27.263Z,1516720827.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:27.649Z,1516720827.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:27.669Z,1516720827.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:28.057Z,1516720828.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:28.072Z,1516720828.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:28.455Z,1516720828.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:28.470Z,1516720828.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:28.872Z,1516720828.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:28.896Z,1516720828.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:29.275Z,1516720829.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:29.305Z,1516720829.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:29.671Z,1516720829.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:29.695Z,1516720829.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:30.055Z,1516720830.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:30.077Z,1516720830.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:30.460Z,1516720830.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:30.475Z,1516720830.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:30.858Z,1516720830.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:30.883Z,1516720830.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:31.261Z,1516720831.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:31.276Z,1516720831.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:31.663Z,1516720831.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:31.679Z,1516720831.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:32.064Z,1516720832.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:32.079Z,1516720832.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:32.464Z,1516720832.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:32.479Z,1516720832.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:32.853Z,1516720832.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:32.885Z,1516720832.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:33.263Z,1516720833.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:33.279Z,1516720833.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:33.654Z,1516720833.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:33.678Z,1516720833.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:34.057Z,1516720834.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:34.078Z,1516720834.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:34.460Z,1516720834.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:34.477Z,1516720834.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:34.867Z,1516720834.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:34.887Z,1516720834.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:35.271Z,1516720835.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:35.286Z,1516720835.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:35.669Z,1516720835.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:35.684Z,1516720835.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:36.052Z,1516720836.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:36.083Z,1516720836.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:36.460Z,1516720836.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:36.485Z,1516720836.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:36.849Z,1516720836.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:36.878Z,1516720836.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:37.249Z,1516720837.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:37.275Z,1516720837.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:37.664Z,1516720837.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:37.688Z,1516720837.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:38.075Z,1516720838.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:38.092Z,1516720838.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:41.168Z,1516720841.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:41.184Z,1516720841.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:41.282Z,1516720841.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:41.324Z,1516720841.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:41.636Z,1516720841.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:41.673Z,1516720841.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:42.037Z,1516720842.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:42.052Z,1516720842.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:42.436Z,1516720842.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:42.451Z,1516720842.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:42.838Z,1516720842.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:42.853Z,1516720842.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:43.239Z,1516720843.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:43.254Z,1516720843.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:43.638Z,1516720843.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:43.653Z,1516720843.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:44.036Z,1516720844.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:44.051Z,1516720844.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:44.434Z,1516720844.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:44.448Z,1516720844.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:44.832Z,1516720844.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:44.851Z,1516720844.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:45.237Z,1516720845.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:45.257Z,1516720845.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:45.639Z,1516720845.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:45.655Z,1516720845.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:46.043Z,1516720846.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:46.058Z,1516720846.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:46.438Z,1516720846.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:46.453Z,1516720846.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:46.833Z,1516720846.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:46.849Z,1516720846.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:47.232Z,1516720847.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:47.247Z,1516720847.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:47.638Z,1516720847.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:47.661Z,1516720847.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:48.043Z,1516720848.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:48.058Z,1516720848.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:48.440Z,1516720848.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:48.481Z,1516720848.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:48.832Z,1516720848.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:48.864Z,1516720848.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:49.225Z,1516720849.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:49.260Z,1516720849.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:49.646Z,1516720849.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:49.662Z,1516720849.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:50.046Z,1516720850.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:50.061Z,1516720850.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:50.443Z,1516720850.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:50.458Z,1516720850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:50.826Z,1516720850.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:50.861Z,1516720850.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:51.225Z,1516720851.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:51.261Z,1516720851.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:51.648Z,1516720851.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:51.663Z,1516720851.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:52.051Z,1516720852.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:52.066Z,1516720852.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:52.440Z,1516720852.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:52.461Z,1516720852.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:52.825Z,1516720852.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:52.864Z,1516720852.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:53.229Z,1516720853.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:53.255Z,1516720853.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:53.643Z,1516720853.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:53.663Z,1516720853.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:54.048Z,1516720854.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:54.062Z,1516720854.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:54.451Z,1516720854.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:54.466Z,1516720854.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:54.825Z,1516720854.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:54.857Z,1516720854.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:55.225Z,1516720855.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:55.258Z,1516720855.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:55.648Z,1516720855.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:55.669Z,1516720855.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:56.047Z,1516720856.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:56.062Z,1516720856.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:56.444Z,1516720856.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:56.464Z,1516720856.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:56.830Z,1516720856.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:56.856Z,1516720856.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:57.225Z,1516720857.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:57.250Z,1516720857.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:57.642Z,1516720857.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:57.658Z,1516720857.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:58.046Z,1516720858.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:58.061Z,1516720858.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:58.444Z,1516720858.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:58.458Z,1516720858.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:58.825Z,1516720858.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:58.864Z,1516720858.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:59.225Z,1516720859.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:59.250Z,1516720859.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:20:59.640Z,1516720859.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:20:59.662Z,1516720859.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:00.048Z,1516720860.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:00.062Z,1516720860.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:00.444Z,1516720860.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:00.458Z,1516720860.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:00.825Z,1516720860.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:00.857Z,1516720860.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:01.224Z,1516720861.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:01.260Z,1516720861.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:01.648Z,1516720861.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:01.663Z,1516720861.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:02.043Z,1516720862.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:02.065Z,1516720862.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:02.435Z,1516720862.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:02.471Z,1516720862.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:02.826Z,1516720862.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:02.853Z,1516720862.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:03.228Z,1516720863.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:03.264Z,1516720863.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:03.635Z,1516720863.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:03.671Z,1516720863.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:04.058Z,1516720864.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:04.073Z,1516720864.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:04.447Z,1516720864.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:04.477Z,1516720864.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:04.832Z,1516720864.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:04.847Z,1516720864.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:05.230Z,1516720865.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:05.245Z,1516720865.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:05.648Z,1516720865.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:05.672Z,1516720865.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:06.047Z,1516720866.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:06.071Z,1516720866.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:06.444Z,1516720866.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:06.479Z,1516720866.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:06.836Z,1516720866.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:06.857Z,1516720866.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:07.233Z,1516720867.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:07.259Z,1516720867.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:07.637Z,1516720867.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:07.656Z,1516720867.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:08.044Z,1516720868.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:08.059Z,1516720868.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:08.445Z,1516720868.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:08.459Z,1516720868.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:08.829Z,1516720868.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:08.856Z,1516720868.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:09.237Z,1516720869.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:09.252Z,1516720869.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:09.648Z,1516720869.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:09.668Z,1516720869.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:10.047Z,1516720870.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:10.069Z,1516720870.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:10.447Z,1516720870.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:10.469Z,1516720870.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:10.838Z,1516720870.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:10.852Z,1516720870.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:11.233Z,1516720871.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:11.253Z,1516720871.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:11.641Z,1516720871.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:11.662Z,1516720871.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:12.048Z,1516720872.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:12.063Z,1516720872.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:12.442Z,1516720872.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:12.463Z,1516720872.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:12.832Z,1516720872.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:12.860Z,1516720872.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:13.239Z,1516720873.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:13.255Z,1516720873.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:13.622Z,1516720873.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:13.662Z,1516720873.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:14.044Z,1516720874.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:14.060Z,1516720874.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:14.446Z,1516720874.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:14.470Z,1516720874.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:14.840Z,1516720874.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:14.864Z,1516720874.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:15.224Z,1516720875.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:15.257Z,1516720875.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:15.624Z,1516720875.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:15.663Z,1516720875.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:16.025Z,1516720876.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:16.052Z,1516720876.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:16.424Z,1516720876.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:16.457Z,1516720876.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:16.842Z,1516720876.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:16.865Z,1516720876.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:17.242Z,1516720877.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:17.257Z,1516720877.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:17.650Z,1516720877.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:17.669Z,1516720877.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:18.030Z,1516720878.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:18.069Z,1516720878.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:18.426Z,1516720878.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:18.468Z,1516720878.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:18.830Z,1516720878.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:18.874Z,1516720878.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:19.243Z,1516720879.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:19.288Z,1516720879.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:19.658Z,1516720879.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:19.690Z,1516720879.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:20.058Z,1516720880.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:20.100Z,1516720880.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:20.453Z,1516720880.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:20.482Z,1516720880.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:20.838Z,1516720880.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:20.854Z,1516720880.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:21.236Z,1516720881.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:21.257Z,1516720881.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:21.640Z,1516720881.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:21.655Z,1516720881.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:22.041Z,1516720882.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:22.061Z,1516720882.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:22.436Z,1516720882.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:22.471Z,1516720882.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:22.837Z,1516720882.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:22.877Z,1516720882.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:23.250Z,1516720883.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:23.281Z,1516720883.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:23.665Z,1516720883.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:23.689Z,1516720883.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:24.034Z,1516720884.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:24.072Z,1516720884.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:24.435Z,1516720884.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:24.463Z,1516720884.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:24.863Z,1516720884.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:24.902Z,1516720884.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:25.239Z,1516720885.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:25.324Z,1516720885.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:25.646Z,1516720885.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:25.666Z,1516720885.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:26.053Z,1516720886.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:26.077Z,1516720886.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:26.449Z,1516720886.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:26.506Z,1516720886.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:26.830Z,1516720886.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:26.877Z,1516720886.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:27.239Z,1516720887.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:27.274Z,1516720887.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:27.630Z,1516720887.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:27.666Z,1516720887.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:28.042Z,1516720888.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:28.073Z,1516720888.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:28.453Z,1516720888.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:28.486Z,1516720888.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:28.845Z,1516720888.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:28.893Z,1516720888.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:29.232Z,1516720889.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:29.255Z,1516720889.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:29.637Z,1516720889.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:29.681Z,1516720889.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:30.039Z,1516720890.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:30.092Z,1516720890.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:30.432Z,1516720890.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:30.463Z,1516720890.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:30.848Z,1516720890.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:30.869Z,1516720890.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:31.250Z,1516720891.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:31.311Z,1516720891.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:31.646Z,1516720891.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:31.677Z,1516720891.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:32.055Z,1516720892.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:32.083Z,1516720892.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:32.426Z,1516720892.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:32.478Z,1516720892.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:32.830Z,1516720892.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:32.870Z,1516720892.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:33.242Z,1516720893.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:33.286Z,1516720893.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:33.631Z,1516720893.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:33.646Z,1516720893.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:34.046Z,1516720894.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:34.082Z,1516720894.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:34.454Z,1516720894.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:34.482Z,1516720894.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:34.837Z,1516720894.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:34.879Z,1516720894.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:35.234Z,1516720895.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:35.283Z,1516720895.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:35.642Z,1516720895.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:35.682Z,1516720895.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:36.035Z,1516720896.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:36.107Z,1516720896.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:36.432Z,1516720896.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:36.448Z,1516720896.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:36.835Z,1516720896.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:36.850Z,1516720896.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:37.239Z,1516720897.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:37.257Z,1516720897.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:37.635Z,1516720897.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:37.651Z,1516720897.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:38.042Z,1516720898.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:38.061Z,1516720898.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:38.429Z,1516720898.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:38.448Z,1516720898.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:41.524Z,1516720901.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:41.540Z,1516720901.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:41.542Z,1516720901.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:41.542Z,1516720901.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 241 2018-01-23T15:21:41.542Z,1516720901.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:21:41.571Z,1516720901.571 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:21:41.645Z,1516720901.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:41.685Z,1516720901.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:41.697Z,1516720901.697 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:21:41.697Z,1516720901.697 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 241 2018-01-23T15:21:42.027Z,1516720902.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:42.042Z,1516720902.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:42.044Z,1516720902.044 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:21:42.044Z,1516720902.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:21:42.044Z,1516720902.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:21:42.432Z,1516720902.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:42.447Z,1516720902.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:42.819Z,1516720902.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:42.835Z,1516720902.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:43.201Z,1516720903.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:43.234Z,1516720903.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:43.601Z,1516720903.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:43.632Z,1516720903.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:44.001Z,1516720904.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:44.033Z,1516720904.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:44.400Z,1516720904.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:44.415Z,1516720904.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:44.812Z,1516720904.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:44.835Z,1516720904.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:45.236Z,1516720905.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:45.251Z,1516720905.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:45.615Z,1516720905.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:45.650Z,1516720905.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:46.008Z,1516720906.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:46.024Z,1516720906.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:46.412Z,1516720906.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:46.449Z,1516720906.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:46.808Z,1516720906.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:46.825Z,1516720906.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:47.210Z,1516720907.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:47.225Z,1516720907.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:47.649Z,1516720907.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:47.669Z,1516720907.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:48.015Z,1516720908.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:48.057Z,1516720908.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:48.381Z,1516720908.381 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T15:21:48.382Z,1516720908.382 [NAL9602] Data Fault, FailCount= 1 2018-01-23T15:21:48.382Z,1516720908.382 [NAL9602](ERROR): Data Fault 2018-01-23T15:21:48.409Z,1516720908.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:48.437Z,1516720908.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:48.471Z,1516720908.471 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T15:21:48.784Z,1516720908.784 [NAL9602](INFO): Powering down 2018-01-23T15:21:48.810Z,1516720908.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:48.837Z,1516720908.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:49.204Z,1516720909.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:49.236Z,1516720909.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:49.598Z,1516720909.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:49.629Z,1516720909.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:49.660Z,1516720909.660 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T15:21:49.660Z,1516720909.660 [NAL9602] No Fault, FailCount= 1 2018-01-23T15:21:49.000Z,1516720910.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:50.027Z,1516720910.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:50.412Z,1516720910.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:50.427Z,1516720910.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:50.797Z,1516720910.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:50.833Z,1516720910.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:51.200Z,1516720911.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:51.234Z,1516720911.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:51.600Z,1516720911.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:51.639Z,1516720911.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:52.004Z,1516720912.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:52.039Z,1516720912.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:52.041Z,1516720912.041 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:52.041Z,1516720912.041 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 241 2018-01-23T15:21:52.041Z,1516720912.041 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:21:52.066Z,1516720912.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:21:52.412Z,1516720912.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:52.426Z,1516720912.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:52.463Z,1516720912.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:21:52.463Z,1516720912.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 241 2018-01-23T15:21:52.808Z,1516720912.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:52.823Z,1516720912.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:52.823Z,1516720912.823 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 241 2018-01-23T15:21:52.823Z,1516720912.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:21:52.824Z,1516720912.824 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:21:52.824Z,1516720912.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:21:52.825Z,1516720912.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:21:52.876Z,1516720912.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:21:53.207Z,1516720913.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:53.242Z,1516720913.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:21:53.242Z,1516720913.242 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 241 2018-01-23T15:21:53.604Z,1516720913.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:53.628Z,1516720913.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:21:53.629Z,1516720913.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:21:53.629Z,1516720913.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:21:54.009Z,1516720914.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:54.023Z,1516720914.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:21:54.024Z,1516720914.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:54.404Z,1516720914.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:54.419Z,1516720914.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:21:54.420Z,1516720914.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:54.804Z,1516720914.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:54.832Z,1516720914.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:21:54.833Z,1516720914.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:55.209Z,1516720915.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:55.223Z,1516720915.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:21:55.224Z,1516720915.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:55.605Z,1516720915.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:55.620Z,1516720915.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:21:55.621Z,1516720915.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:56.006Z,1516720916.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:56.021Z,1516720916.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:21:56.021Z,1516720916.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:56.407Z,1516720916.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:56.421Z,1516720916.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:21:56.422Z,1516720916.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:56.804Z,1516720916.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:56.818Z,1516720916.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:21:56.820Z,1516720916.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:57.204Z,1516720917.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:57.229Z,1516720917.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:21:57.230Z,1516720917.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:57.607Z,1516720917.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:57.621Z,1516720917.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:21:57.622Z,1516720917.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:58.004Z,1516720918.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:58.024Z,1516720918.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:21:58.025Z,1516720918.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:58.404Z,1516720918.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:58.432Z,1516720918.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:21:58.433Z,1516720918.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:58.807Z,1516720918.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:58.821Z,1516720918.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:21:58.822Z,1516720918.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:59.205Z,1516720919.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:59.219Z,1516720919.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:21:59.220Z,1516720919.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:21:59.604Z,1516720919.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:21:59.629Z,1516720919.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:21:59.630Z,1516720919.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:00.008Z,1516720920.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:00.022Z,1516720920.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:22:00.023Z,1516720920.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:00.405Z,1516720920.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:00.420Z,1516720920.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:22:00.421Z,1516720920.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:00.813Z,1516720920.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:00.827Z,1516720920.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:22:00.828Z,1516720920.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:01.211Z,1516720921.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:01.225Z,1516720921.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:22:01.226Z,1516720921.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:01.605Z,1516720921.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:01.620Z,1516720921.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:22:01.621Z,1516720921.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:02.007Z,1516720922.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:02.021Z,1516720922.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:22:02.022Z,1516720922.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:02.408Z,1516720922.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:02.422Z,1516720922.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:22:02.423Z,1516720922.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:02.805Z,1516720922.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:02.820Z,1516720922.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:22:02.821Z,1516720922.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:03.208Z,1516720923.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:03.222Z,1516720923.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:22:03.223Z,1516720923.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:03.611Z,1516720923.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:03.626Z,1516720923.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:22:03.627Z,1516720923.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:04.011Z,1516720924.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:04.025Z,1516720924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:22:04.026Z,1516720924.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:04.408Z,1516720924.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:04.422Z,1516720924.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:22:04.423Z,1516720924.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:04.806Z,1516720924.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:04.832Z,1516720924.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:22:04.833Z,1516720924.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:05.211Z,1516720925.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:05.225Z,1516720925.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:22:05.226Z,1516720925.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:05.608Z,1516720925.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:05.622Z,1516720925.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:22:05.623Z,1516720925.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:06.007Z,1516720926.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:06.022Z,1516720926.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:22:06.023Z,1516720926.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:06.405Z,1516720926.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:06.420Z,1516720926.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:22:06.421Z,1516720926.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:06.807Z,1516720926.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:06.821Z,1516720926.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:22:06.822Z,1516720926.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:07.208Z,1516720927.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:07.222Z,1516720927.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:22:07.223Z,1516720927.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:07.605Z,1516720927.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:07.620Z,1516720927.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:22:07.621Z,1516720927.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:08.008Z,1516720928.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:08.022Z,1516720928.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:22:08.023Z,1516720928.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:08.406Z,1516720928.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:08.429Z,1516720928.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:22:08.430Z,1516720928.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:08.805Z,1516720928.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:08.820Z,1516720928.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:22:08.821Z,1516720928.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:09.208Z,1516720929.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:09.222Z,1516720929.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:22:09.223Z,1516720929.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:09.607Z,1516720929.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:09.622Z,1516720929.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:22:09.623Z,1516720929.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:10.012Z,1516720930.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:10.027Z,1516720930.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:22:10.028Z,1516720930.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:10.413Z,1516720930.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:10.427Z,1516720930.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:22:10.428Z,1516720930.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:10.804Z,1516720930.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:10.827Z,1516720930.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:22:10.828Z,1516720930.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:11.208Z,1516720931.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:11.222Z,1516720931.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:22:11.223Z,1516720931.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:11.602Z,1516720931.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:11.632Z,1516720931.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:22:11.633Z,1516720931.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:12.004Z,1516720932.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:12.026Z,1516720932.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:22:12.027Z,1516720932.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:12.408Z,1516720932.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:12.422Z,1516720932.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:22:12.423Z,1516720932.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:12.807Z,1516720932.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:12.821Z,1516720932.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:22:12.822Z,1516720932.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:13.208Z,1516720933.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:13.223Z,1516720933.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:13.608Z,1516720933.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:13.623Z,1516720933.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:14.007Z,1516720934.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:14.028Z,1516720934.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:14.412Z,1516720934.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:14.427Z,1516720934.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:14.808Z,1516720934.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:14.823Z,1516720934.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:15.200Z,1516720935.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:15.232Z,1516720935.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:15.612Z,1516720935.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:15.627Z,1516720935.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:16.008Z,1516720936.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:16.023Z,1516720936.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:16.402Z,1516720936.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:16.434Z,1516720936.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:16.808Z,1516720936.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:16.823Z,1516720936.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:17.208Z,1516720937.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:17.222Z,1516720937.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:17.608Z,1516720937.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:17.628Z,1516720937.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:18.014Z,1516720938.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:18.029Z,1516720938.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:18.408Z,1516720938.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:18.423Z,1516720938.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:18.788Z,1516720938.788 [NAL9602](INFO): Powering up NAL9602 2018-01-23T15:22:18.809Z,1516720938.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:18.840Z,1516720938.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:19.207Z,1516720939.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:19.228Z,1516720939.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:19.609Z,1516720939.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:19.625Z,1516720939.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:20.010Z,1516720940.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:20.025Z,1516720940.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:20.404Z,1516720940.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:20.435Z,1516720940.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:20.800Z,1516720940.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:20.827Z,1516720940.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:21.218Z,1516720941.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:21.232Z,1516720941.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:21.599Z,1516720941.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:21.630Z,1516720941.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:22.001Z,1516720942.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:22.029Z,1516720942.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:22.405Z,1516720942.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:22.438Z,1516720942.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:22.802Z,1516720942.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:22.825Z,1516720942.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:23.201Z,1516720943.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:23.217Z,1516720943.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:23.601Z,1516720943.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:23.616Z,1516720943.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:24.009Z,1516720944.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:24.025Z,1516720944.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:24.405Z,1516720944.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:24.421Z,1516720944.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:24.804Z,1516720944.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:24.841Z,1516720944.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:25.209Z,1516720945.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:25.225Z,1516720945.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:25.607Z,1516720945.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:25.623Z,1516720945.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:26.004Z,1516720946.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:26.034Z,1516720946.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:26.405Z,1516720946.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:26.420Z,1516720946.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:26.809Z,1516720946.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:26.829Z,1516720946.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:27.211Z,1516720947.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:27.226Z,1516720947.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:27.609Z,1516720947.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:27.624Z,1516720947.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:28.014Z,1516720948.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:28.029Z,1516720948.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:28.409Z,1516720948.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:28.423Z,1516720948.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:28.806Z,1516720948.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:28.821Z,1516720948.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:29.218Z,1516720949.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:29.233Z,1516720949.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:29.620Z,1516720949.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:29.636Z,1516720949.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:29.984Z,1516720949.984 [NAL9602](INFO): NAL9602 initialized 2018-01-23T15:22:30.009Z,1516720950.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:30.032Z,1516720950.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:30.406Z,1516720950.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:30.434Z,1516720950.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:30.826Z,1516720950.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:30.841Z,1516720950.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:31.226Z,1516720951.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:31.242Z,1516720951.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:31.601Z,1516720951.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:31.628Z,1516720951.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:32.001Z,1516720952.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:32.033Z,1516720952.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:32.400Z,1516720952.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:32.435Z,1516720952.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:32.827Z,1516720952.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:32.842Z,1516720952.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:33.223Z,1516720953.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:33.238Z,1516720953.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:33.617Z,1516720953.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:33.643Z,1516720953.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:34.001Z,1516720954.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:34.028Z,1516720954.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:34.408Z,1516720954.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:34.431Z,1516720954.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:34.813Z,1516720954.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:34.832Z,1516720954.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:35.213Z,1516720955.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:35.228Z,1516720955.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:35.616Z,1516720955.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:35.643Z,1516720955.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:36.023Z,1516720956.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:36.038Z,1516720956.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:36.424Z,1516720956.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:36.440Z,1516720956.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:36.800Z,1516720956.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:36.836Z,1516720956.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:37.200Z,1516720957.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:37.237Z,1516720957.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:37.605Z,1516720957.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:37.641Z,1516720957.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:38.009Z,1516720958.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:38.040Z,1516720958.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:38.401Z,1516720958.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:38.444Z,1516720958.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:38.815Z,1516720958.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:38.842Z,1516720958.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:41.912Z,1516720961.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:41.936Z,1516720961.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:42.043Z,1516720962.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:42.059Z,1516720962.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:42.394Z,1516720962.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:42.410Z,1516720962.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:42.793Z,1516720962.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:42.808Z,1516720962.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:43.188Z,1516720963.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:43.203Z,1516720963.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:43.607Z,1516720963.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:43.622Z,1516720963.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:44.000Z,1516720964.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:44.015Z,1516720964.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:44.396Z,1516720964.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:44.425Z,1516720964.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:44.791Z,1516720964.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:44.813Z,1516720964.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:45.188Z,1516720965.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:45.203Z,1516720965.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:45.574Z,1516720965.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:45.613Z,1516720965.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:45.992Z,1516720965.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:46.008Z,1516720966.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:46.378Z,1516720966.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:46.416Z,1516720966.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:46.796Z,1516720966.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:46.811Z,1516720966.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:47.200Z,1516720967.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:47.217Z,1516720967.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:47.595Z,1516720967.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:47.632Z,1516720967.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:47.974Z,1516720967.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:48.005Z,1516720968.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:48.379Z,1516720968.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:48.386Z,1516720968.386 [PNI_TCM](ERROR): CRC does not match. Expected:0x54517 got:0x53735 2018-01-23T15:22:48.413Z,1516720968.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:48.777Z,1516720968.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:48.812Z,1516720968.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:49.177Z,1516720969.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:49.213Z,1516720969.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:49.593Z,1516720969.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:49.616Z,1516720969.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:50.001Z,1516720970.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:50.020Z,1516720970.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:50.391Z,1516720970.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:50.417Z,1516720970.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:50.777Z,1516720970.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:50.809Z,1516720970.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:51.176Z,1516720971.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:51.215Z,1516720971.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:51.575Z,1516720971.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:51.601Z,1516720971.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:51.977Z,1516720971.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:52.024Z,1516720972.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:52.376Z,1516720972.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:52.424Z,1516720972.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:52.789Z,1516720972.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:52.817Z,1516720972.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:53.193Z,1516720973.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:53.219Z,1516720973.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:53.587Z,1516720973.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:53.621Z,1516720973.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:53.974Z,1516720973.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:53.989Z,1516720973.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:54.377Z,1516720974.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:54.395Z,1516720974.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:54.785Z,1516720974.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:54.801Z,1516720974.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:55.187Z,1516720975.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:55.232Z,1516720975.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:55.600Z,1516720975.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:55.627Z,1516720975.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:56.005Z,1516720976.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:56.030Z,1516720976.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:56.394Z,1516720976.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:56.421Z,1516720976.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:56.782Z,1516720976.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:56.825Z,1516720976.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:57.183Z,1516720977.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:57.198Z,1516720977.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:57.577Z,1516720977.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:57.607Z,1516720977.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:57.984Z,1516720977.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:58.008Z,1516720978.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:58.387Z,1516720978.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:58.413Z,1516720978.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:58.788Z,1516720978.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:58.803Z,1516720978.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:59.193Z,1516720979.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:59.211Z,1516720979.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:59.594Z,1516720979.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:22:59.609Z,1516720979.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:22:59.982Z,1516720979.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:00.035Z,1516720980.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:00.388Z,1516720980.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:00.411Z,1516720980.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:00.786Z,1516720980.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:00.806Z,1516720980.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:01.184Z,1516720981.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:01.208Z,1516720981.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:01.595Z,1516720981.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:01.636Z,1516720981.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:01.995Z,1516720981.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:02.017Z,1516720982.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:02.399Z,1516720982.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:02.419Z,1516720982.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:02.784Z,1516720982.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:02.824Z,1516720982.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:03.190Z,1516720983.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:03.217Z,1516720983.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:03.574Z,1516720983.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:03.601Z,1516720983.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:03.994Z,1516720983.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:04.013Z,1516720984.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:04.386Z,1516720984.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:04.405Z,1516720984.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:04.794Z,1516720984.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:04.810Z,1516720984.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:05.203Z,1516720985.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:05.222Z,1516720985.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:05.595Z,1516720985.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:05.627Z,1516720985.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:05.974Z,1516720985.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:06.008Z,1516720986.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:06.376Z,1516720986.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:06.409Z,1516720986.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:06.777Z,1516720986.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:06.811Z,1516720986.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:07.181Z,1516720987.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:07.210Z,1516720987.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:07.591Z,1516720987.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:07.622Z,1516720987.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:08.001Z,1516720988.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:08.015Z,1516720988.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:08.391Z,1516720988.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:08.418Z,1516720988.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:08.781Z,1516720988.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:08.816Z,1516720988.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:09.176Z,1516720989.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:09.212Z,1516720989.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:09.574Z,1516720989.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:09.589Z,1516720989.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:09.977Z,1516720989.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:09.992Z,1516720989.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:10.381Z,1516720990.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:10.400Z,1516720990.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:10.791Z,1516720990.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:10.829Z,1516720990.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:11.199Z,1516720991.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:11.242Z,1516720991.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:11.591Z,1516720991.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:11.605Z,1516720991.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:11.985Z,1516720991.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:12.005Z,1516720992.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:12.389Z,1516720992.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:12.412Z,1516720992.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:12.789Z,1516720992.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:12.804Z,1516720992.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:13.185Z,1516720993.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:13.205Z,1516720993.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:13.590Z,1516720993.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:13.609Z,1516720993.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:13.994Z,1516720993.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:14.039Z,1516720994.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:14.394Z,1516720994.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:14.409Z,1516720994.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:14.792Z,1516720994.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:14.813Z,1516720994.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:15.185Z,1516720995.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:15.200Z,1516720995.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:15.580Z,1516720995.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:15.601Z,1516720995.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:15.984Z,1516720995.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:16.003Z,1516720996.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:16.385Z,1516720996.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:16.400Z,1516720996.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:16.792Z,1516720996.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:16.819Z,1516720996.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:17.198Z,1516720997.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:17.215Z,1516720997.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:17.596Z,1516720997.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:17.611Z,1516720997.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:17.977Z,1516720997.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:18.003Z,1516720998.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:18.384Z,1516720998.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:18.415Z,1516720998.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:18.778Z,1516720998.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:18.805Z,1516720998.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:19.187Z,1516720999.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:19.207Z,1516720999.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:19.590Z,1516720999.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:19.618Z,1516720999.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:20.003Z,1516721000.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:20.024Z,1516721000.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:20.392Z,1516721000.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:20.413Z,1516721000.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:20.781Z,1516721000.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:20.807Z,1516721000.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:21.177Z,1516721001.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:21.217Z,1516721001.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:21.577Z,1516721001.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:21.602Z,1516721001.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:21.977Z,1516721001.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:22.009Z,1516721002.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:22.381Z,1516721002.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:22.414Z,1516721002.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:22.795Z,1516721002.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:22.810Z,1516721002.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:23.196Z,1516721003.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:23.223Z,1516721003.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:23.600Z,1516721003.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:23.616Z,1516721003.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:23.974Z,1516721003.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:23.998Z,1516721003.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:24.385Z,1516721004.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:24.411Z,1516721004.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:24.778Z,1516721004.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:24.805Z,1516721004.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:25.177Z,1516721005.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:25.213Z,1516721005.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:25.592Z,1516721005.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:25.617Z,1516721005.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:25.991Z,1516721005.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:26.029Z,1516721006.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:26.392Z,1516721006.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:26.423Z,1516721006.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:26.781Z,1516721006.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:26.800Z,1516721006.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:27.184Z,1516721007.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:27.200Z,1516721007.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:27.582Z,1516721007.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:27.606Z,1516721007.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:27.987Z,1516721007.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:28.009Z,1516721008.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:28.386Z,1516721008.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:28.401Z,1516721008.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:28.790Z,1516721008.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:28.821Z,1516721008.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:29.198Z,1516721009.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:29.217Z,1516721009.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:29.596Z,1516721009.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:29.611Z,1516721009.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:29.979Z,1516721009.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:30.005Z,1516721010.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:30.380Z,1516721010.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:30.411Z,1516721010.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:30.784Z,1516721010.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:30.806Z,1516721010.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:31.180Z,1516721011.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:31.212Z,1516721011.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:31.592Z,1516721011.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:31.619Z,1516721011.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:32.002Z,1516721012.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:32.018Z,1516721012.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:32.395Z,1516721012.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:32.410Z,1516721012.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:32.777Z,1516721012.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:32.809Z,1516721012.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:33.189Z,1516721013.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:33.205Z,1516721013.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:33.590Z,1516721013.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:33.618Z,1516721013.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:34.003Z,1516721014.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:34.018Z,1516721014.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:34.396Z,1516721014.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:34.411Z,1516721014.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:34.777Z,1516721014.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:34.809Z,1516721014.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:35.176Z,1516721015.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:35.212Z,1516721015.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:35.592Z,1516721015.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:35.623Z,1516721015.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:36.004Z,1516721016.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:36.019Z,1516721016.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:36.405Z,1516721016.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:36.425Z,1516721016.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:36.779Z,1516721016.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:36.810Z,1516721016.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:37.178Z,1516721017.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:37.205Z,1516721017.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:37.591Z,1516721017.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:37.619Z,1516721017.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:37.623Z,1516721017.623 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:18:37.3Z 2018-01-23T15:23:37.623Z,1516721017.623 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:23:37.623Z,1516721017.623 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:23:37.992Z,1516721017.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:38.031Z,1516721018.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:38.519Z,1516721018.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:38.541Z,1516721018.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:38.777Z,1516721018.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:38.828Z,1516721018.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:41.929Z,1516721021.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:41.945Z,1516721021.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:42.019Z,1516721022.019 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0284.lzma 2018-01-23T15:23:42.056Z,1516721022.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:42.089Z,1516721022.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:42.436Z,1516721022.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:42.470Z,1516721022.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:42.794Z,1516721022.794 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0284.lzma.bak 2018-01-23T15:23:42.794Z,1516721022.794 [DataOverHttps](INFO): SBD MOMSN=7755779 2018-01-23T15:23:42.837Z,1516721022.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:42.871Z,1516721022.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:43.476Z,1516721023.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:43.491Z,1516721023.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:43.619Z,1516721023.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:43.654Z,1516721023.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:46.717Z,1516721026.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:46.732Z,1516721026.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:46.825Z,1516721026.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:46.865Z,1516721026.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:47.196Z,1516721027.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:47.225Z,1516721027.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:47.596Z,1516721027.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:47.620Z,1516721027.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:47.991Z,1516721027.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:48.021Z,1516721028.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:48.385Z,1516721028.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:48.417Z,1516721028.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:51.479Z,1516721031.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:51.494Z,1516721031.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:51.576Z,1516721031.576 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20180123T031358/Express0285.lzma 2018-01-23T15:23:51.596Z,1516721031.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:51.644Z,1516721031.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:51.995Z,1516721031.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:52.021Z,1516721032.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:52.362Z,1516721032.362 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0285.lzma.bak 2018-01-23T15:23:52.362Z,1516721032.362 [DataOverHttps](INFO): SBD MOMSN=7755781 2018-01-23T15:23:52.399Z,1516721032.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:52.443Z,1516721032.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:53.113Z,1516721033.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:53.133Z,1516721033.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:53.136Z,1516721033.136 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:23:53.136Z,1516721033.136 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:23:53.136Z,1516721033.136 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:23:53.241Z,1516721033.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:53.277Z,1516721033.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:56.286Z,1516721036.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:56.302Z,1516721036.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:56.401Z,1516721036.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:56.429Z,1516721036.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:56.807Z,1516721036.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:56.837Z,1516721036.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:57.207Z,1516721037.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:57.233Z,1516721037.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:57.603Z,1516721037.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:57.628Z,1516721037.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:57.992Z,1516721037.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:58.029Z,1516721038.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:58.389Z,1516721038.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:58.404Z,1516721038.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:58.786Z,1516721038.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:58.801Z,1516721038.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:59.186Z,1516721039.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:59.201Z,1516721039.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:23:59.596Z,1516721039.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:23:59.633Z,1516721039.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:00.003Z,1516721040.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:00.018Z,1516721040.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:00.398Z,1516721040.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:00.417Z,1516721040.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:00.794Z,1516721040.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:00.809Z,1516721040.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:01.192Z,1516721041.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:01.212Z,1516721041.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:01.599Z,1516721041.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:01.615Z,1516721041.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:01.998Z,1516721041.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:02.020Z,1516721042.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:02.400Z,1516721042.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:02.415Z,1516721042.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:02.792Z,1516721042.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:02.811Z,1516721042.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:03.193Z,1516721043.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:03.208Z,1516721043.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:03.598Z,1516721043.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:03.613Z,1516721043.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:03.000Z,1516721044.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:04.014Z,1516721044.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:04.399Z,1516721044.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:04.413Z,1516721044.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:04.797Z,1516721044.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:04.817Z,1516721044.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:05.196Z,1516721045.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:05.217Z,1516721045.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:05.599Z,1516721045.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:05.614Z,1516721045.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:05.999Z,1516721045.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:06.014Z,1516721046.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:06.398Z,1516721046.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:06.417Z,1516721046.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:06.794Z,1516721046.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:06.812Z,1516721046.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:07.196Z,1516721047.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:07.211Z,1516721047.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:07.603Z,1516721047.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:07.619Z,1516721047.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:07.998Z,1516721047.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:08.020Z,1516721048.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:08.400Z,1516721048.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:08.423Z,1516721048.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:08.797Z,1516721048.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:08.813Z,1516721048.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:09.193Z,1516721049.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:09.208Z,1516721049.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:09.595Z,1516721049.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:09.622Z,1516721049.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:10.007Z,1516721050.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:10.023Z,1516721050.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:10.395Z,1516721050.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:10.425Z,1516721050.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:10.785Z,1516721050.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:10.820Z,1516721050.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:11.185Z,1516721051.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:11.220Z,1516721051.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:11.595Z,1516721051.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:11.621Z,1516721051.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:12.007Z,1516721052.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:12.022Z,1516721052.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:12.412Z,1516721052.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:12.439Z,1516721052.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:12.800Z,1516721052.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:12.827Z,1516721052.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:13.193Z,1516721053.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:13.213Z,1516721053.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:13.608Z,1516721053.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:13.638Z,1516721053.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:14.003Z,1516721054.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:14.018Z,1516721054.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:14.395Z,1516721054.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:14.410Z,1516721054.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:14.790Z,1516721054.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:14.816Z,1516721054.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:15.190Z,1516721055.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:15.221Z,1516721055.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:15.607Z,1516721055.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:15.643Z,1516721055.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:15.999Z,1516721055.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:16.014Z,1516721056.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:16.400Z,1516721056.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:16.420Z,1516721056.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:16.789Z,1516721056.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:16.817Z,1516721056.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:17.201Z,1516721057.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:17.216Z,1516721057.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:17.599Z,1516721057.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:17.614Z,1516721057.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:18.002Z,1516721058.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:18.018Z,1516721058.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:18.403Z,1516721058.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:18.418Z,1516721058.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:18.804Z,1516721058.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:18.821Z,1516721058.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:19.194Z,1516721059.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:19.209Z,1516721059.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:19.588Z,1516721059.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:19.616Z,1516721059.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:19.995Z,1516721059.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:20.023Z,1516721060.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:20.382Z,1516721060.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:20.414Z,1516721060.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:20.804Z,1516721060.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:20.825Z,1516721060.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:21.209Z,1516721061.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:21.224Z,1516721061.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:21.600Z,1516721061.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:21.629Z,1516721061.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:21.989Z,1516721061.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:22.015Z,1516721062.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:22.384Z,1516721062.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:22.440Z,1516721062.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:22.786Z,1516721062.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:22.802Z,1516721062.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:23.198Z,1516721063.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:23.229Z,1516721063.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:23.589Z,1516721063.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:23.604Z,1516721063.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:23.996Z,1516721063.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:24.011Z,1516721064.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:24.403Z,1516721064.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:24.418Z,1516721064.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:24.803Z,1516721064.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:24.818Z,1516721064.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:25.198Z,1516721065.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:25.213Z,1516721065.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:25.592Z,1516721065.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:25.611Z,1516721065.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:25.995Z,1516721065.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:26.016Z,1516721066.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:26.391Z,1516721066.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:26.406Z,1516721066.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:26.797Z,1516721066.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:26.820Z,1516721066.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:27.204Z,1516721067.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:27.219Z,1516721067.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:27.601Z,1516721067.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:27.624Z,1516721067.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:27.992Z,1516721067.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:28.011Z,1516721068.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:28.391Z,1516721068.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:28.430Z,1516721068.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:28.782Z,1516721068.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:28.825Z,1516721068.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:29.189Z,1516721069.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:29.216Z,1516721069.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:29.584Z,1516721069.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:29.619Z,1516721069.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:30.001Z,1516721070.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:30.028Z,1516721070.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:30.406Z,1516721070.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:30.422Z,1516721070.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:30.804Z,1516721070.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:30.819Z,1516721070.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:31.184Z,1516721071.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:31.210Z,1516721071.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:31.604Z,1516721071.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:31.625Z,1516721071.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:31.985Z,1516721071.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:32.013Z,1516721072.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:32.384Z,1516721072.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:32.417Z,1516721072.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:32.804Z,1516721072.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:32.818Z,1516721072.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:32.832Z,1516721072.832 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:24:33.208Z,1516721073.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:33.228Z,1516721073.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:33.604Z,1516721073.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:33.619Z,1516721073.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:33.984Z,1516721073.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:34.010Z,1516721074.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:34.384Z,1516721074.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:34.418Z,1516721074.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:34.784Z,1516721074.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:34.817Z,1516721074.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:35.185Z,1516721075.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:35.212Z,1516721075.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:35.584Z,1516721075.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:35.618Z,1516721075.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:36.004Z,1516721076.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:36.019Z,1516721076.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:36.407Z,1516721076.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:36.422Z,1516721076.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:36.798Z,1516721076.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:36.831Z,1516721076.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:37.188Z,1516721077.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:37.215Z,1516721077.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:37.583Z,1516721077.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:37.609Z,1516721077.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:37.985Z,1516721077.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:38.024Z,1516721078.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:38.384Z,1516721078.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:38.416Z,1516721078.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:38.803Z,1516721078.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:38.818Z,1516721078.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:39.208Z,1516721079.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:39.222Z,1516721079.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:39.600Z,1516721079.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:39.622Z,1516721079.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:39.988Z,1516721079.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:40.021Z,1516721080.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:40.383Z,1516721080.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:40.420Z,1516721080.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:40.782Z,1516721080.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:40.805Z,1516721080.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:41.193Z,1516721081.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:41.219Z,1516721081.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:41.585Z,1516721081.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:41.625Z,1516721081.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:41.996Z,1516721081.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:42.022Z,1516721082.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:42.403Z,1516721082.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:42.426Z,1516721082.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:42.428Z,1516721082.428 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:42.428Z,1516721082.428 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 242 2018-01-23T15:24:42.428Z,1516721082.428 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:24:42.440Z,1516721082.440 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:24:42.795Z,1516721082.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:42.825Z,1516721082.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:42.837Z,1516721082.837 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:24:42.837Z,1516721082.837 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 242 2018-01-23T15:24:43.184Z,1516721083.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:43.221Z,1516721083.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:43.222Z,1516721083.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:24:43.223Z,1516721083.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:24:43.223Z,1516721083.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:24:43.584Z,1516721083.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:43.601Z,1516721083.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:43.985Z,1516721083.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:43.000Z,1516721084.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:44.386Z,1516721084.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:44.401Z,1516721084.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:44.808Z,1516721084.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:44.837Z,1516721084.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:45.219Z,1516721085.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:45.234Z,1516721085.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:45.600Z,1516721085.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:45.635Z,1516721085.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:45.989Z,1516721085.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:46.004Z,1516721086.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:46.389Z,1516721086.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:46.404Z,1516721086.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:46.789Z,1516721086.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:46.809Z,1516721086.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:47.192Z,1516721087.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:47.207Z,1516721087.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:47.589Z,1516721087.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:47.616Z,1516721087.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:47.996Z,1516721087.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:48.011Z,1516721088.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:48.403Z,1516721088.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:48.418Z,1516721088.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:48.807Z,1516721088.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:48.822Z,1516721088.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:49.193Z,1516721089.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:49.209Z,1516721089.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:49.591Z,1516721089.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:49.607Z,1516721089.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:49.993Z,1516721089.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:50.008Z,1516721090.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:50.389Z,1516721090.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:50.404Z,1516721090.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:50.812Z,1516721090.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:50.842Z,1516721090.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:51.199Z,1516721091.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:51.214Z,1516721091.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:51.596Z,1516721091.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:51.611Z,1516721091.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:51.990Z,1516721091.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:52.014Z,1516721092.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:52.392Z,1516721092.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:52.407Z,1516721092.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:52.788Z,1516721092.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:52.811Z,1516721092.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:53.187Z,1516721093.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:53.220Z,1516721093.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:53.221Z,1516721093.221 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:53.222Z,1516721093.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 242 2018-01-23T15:24:53.222Z,1516721093.222 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:24:53.247Z,1516721093.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:24:53.594Z,1516721093.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:53.609Z,1516721093.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:53.621Z,1516721093.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:24:53.621Z,1516721093.621 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 242 2018-01-23T15:24:56.708Z,1516721096.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:56.723Z,1516721096.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:56.724Z,1516721096.724 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 242 2018-01-23T15:24:56.724Z,1516721096.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:24:56.725Z,1516721096.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:24:56.725Z,1516721096.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:24:56.725Z,1516721096.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:24:56.770Z,1516721096.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:24:56.858Z,1516721096.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:56.929Z,1516721096.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:24:56.929Z,1516721096.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 242 2018-01-23T15:24:57.220Z,1516721097.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:57.240Z,1516721097.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:24:57.240Z,1516721097.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:24:57.240Z,1516721097.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:24:57.618Z,1516721097.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:57.633Z,1516721097.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T15:24:57.634Z,1516721097.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:58.026Z,1516721098.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:58.041Z,1516721098.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T15:24:58.042Z,1516721098.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:58.401Z,1516721098.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:58.434Z,1516721098.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T15:24:58.435Z,1516721098.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:58.816Z,1516721098.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:58.842Z,1516721098.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T15:24:58.848Z,1516721098.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:59.232Z,1516721099.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:59.247Z,1516721099.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T15:24:59.248Z,1516721099.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:59.611Z,1516721099.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:24:59.647Z,1516721099.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T15:24:59.648Z,1516721099.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:24:59.999Z,1516721099.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:00.014Z,1516721100.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T15:25:00.028Z,1516721100.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:00.401Z,1516721100.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:00.437Z,1516721100.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T15:25:00.438Z,1516721100.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:00.801Z,1516721100.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:00.815Z,1516721100.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T15:25:00.816Z,1516721100.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:01.206Z,1516721101.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:01.221Z,1516721101.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T15:25:01.222Z,1516721101.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:01.605Z,1516721101.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:01.621Z,1516721101.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T15:25:01.622Z,1516721101.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:02.016Z,1516721102.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:02.055Z,1516721102.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T15:25:02.056Z,1516721102.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:02.412Z,1516721102.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:02.432Z,1516721102.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T15:25:02.433Z,1516721102.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:02.812Z,1516721102.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:02.827Z,1516721102.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T15:25:02.828Z,1516721102.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:03.209Z,1516721103.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:03.224Z,1516721103.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T15:25:03.225Z,1516721103.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:03.609Z,1516721103.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:03.624Z,1516721103.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T15:25:03.625Z,1516721103.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:04.008Z,1516721104.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:04.030Z,1516721104.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T15:25:04.035Z,1516721104.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:04.409Z,1516721104.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:04.428Z,1516721104.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T15:25:04.429Z,1516721104.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:04.816Z,1516721104.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:04.843Z,1516721104.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T15:25:04.844Z,1516721104.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:05.223Z,1516721105.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:05.238Z,1516721105.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T15:25:05.239Z,1516721105.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:05.624Z,1516721105.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:05.639Z,1516721105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T15:25:05.640Z,1516721105.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:05.999Z,1516721105.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:06.036Z,1516721106.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T15:25:06.037Z,1516721106.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:06.401Z,1516721106.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:06.436Z,1516721106.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T15:25:06.437Z,1516721106.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:06.805Z,1516721106.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:06.838Z,1516721106.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T15:25:06.839Z,1516721106.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:07.202Z,1516721107.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:07.229Z,1516721107.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T15:25:07.230Z,1516721107.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:07.600Z,1516721107.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:07.641Z,1516721107.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T15:25:07.642Z,1516721107.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:08.016Z,1516721108.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:08.043Z,1516721108.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T15:25:08.044Z,1516721108.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:08.415Z,1516721108.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:08.441Z,1516721108.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T15:25:08.442Z,1516721108.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:08.811Z,1516721108.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:08.844Z,1516721108.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T15:25:08.845Z,1516721108.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:09.208Z,1516721109.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:09.224Z,1516721109.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T15:25:09.225Z,1516721109.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:09.605Z,1516721109.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:09.621Z,1516721109.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T15:25:09.621Z,1516721109.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:10.008Z,1516721110.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:10.028Z,1516721110.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T15:25:10.029Z,1516721110.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:10.409Z,1516721110.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:10.428Z,1516721110.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T15:25:10.429Z,1516721110.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:10.819Z,1516721110.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:10.834Z,1516721110.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T15:25:10.836Z,1516721110.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:11.218Z,1516721111.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:11.236Z,1516721111.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T15:25:11.237Z,1516721111.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:11.619Z,1516721111.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:11.633Z,1516721111.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T15:25:11.634Z,1516721111.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:12.005Z,1516721112.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:12.024Z,1516721112.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T15:25:12.025Z,1516721112.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:12.409Z,1516721112.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:12.429Z,1516721112.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T15:25:12.430Z,1516721112.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:12.809Z,1516721112.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:12.828Z,1516721112.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T15:25:12.829Z,1516721112.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:13.205Z,1516721113.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:13.227Z,1516721113.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T15:25:13.228Z,1516721113.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:13.604Z,1516721113.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:13.626Z,1516721113.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T15:25:13.627Z,1516721113.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:14.019Z,1516721114.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:14.033Z,1516721114.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T15:25:14.034Z,1516721114.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:14.417Z,1516721114.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:14.436Z,1516721114.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T15:25:14.437Z,1516721114.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:14.818Z,1516721114.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:14.832Z,1516721114.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T15:25:14.833Z,1516721114.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:15.206Z,1516721115.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:15.231Z,1516721115.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T15:25:15.232Z,1516721115.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:15.604Z,1516721115.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:15.626Z,1516721115.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T15:25:15.627Z,1516721115.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:16.004Z,1516721116.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:16.026Z,1516721116.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T15:25:16.032Z,1516721116.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:16.408Z,1516721116.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:16.423Z,1516721116.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T15:25:16.424Z,1516721116.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:16.819Z,1516721116.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:16.834Z,1516721116.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:17.222Z,1516721117.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:17.241Z,1516721117.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:17.620Z,1516721117.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:17.635Z,1516721117.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:17.998Z,1516721117.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:18.033Z,1516721118.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:18.412Z,1516721118.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:18.433Z,1516721118.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:18.800Z,1516721118.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:18.836Z,1516721118.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:19.201Z,1516721119.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:19.229Z,1516721119.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:19.604Z,1516721119.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:19.630Z,1516721119.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:20.020Z,1516721120.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:20.035Z,1516721120.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:20.423Z,1516721120.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:20.438Z,1516721120.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:20.816Z,1516721120.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:20.837Z,1516721120.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:21.201Z,1516721121.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:21.237Z,1516721121.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:21.600Z,1516721121.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:21.633Z,1516721121.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:22.001Z,1516721122.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:22.033Z,1516721122.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:22.401Z,1516721122.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:22.435Z,1516721122.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:22.816Z,1516721122.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:22.838Z,1516721122.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:23.220Z,1516721123.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:23.247Z,1516721123.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:23.624Z,1516721123.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:23.640Z,1516721123.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:23.998Z,1516721123.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:24.022Z,1516721124.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:24.400Z,1516721124.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:24.437Z,1516721124.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:24.801Z,1516721124.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:24.824Z,1516721124.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:25.201Z,1516721125.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:25.216Z,1516721125.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:25.600Z,1516721125.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:25.621Z,1516721125.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:26.019Z,1516721126.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:26.048Z,1516721126.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:26.415Z,1516721126.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:26.446Z,1516721126.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:26.819Z,1516721126.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:26.850Z,1516721126.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:27.206Z,1516721127.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:27.233Z,1516721127.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:27.609Z,1516721127.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:27.625Z,1516721127.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:28.010Z,1516721128.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:28.033Z,1516721128.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:28.413Z,1516721128.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:28.429Z,1516721128.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:28.819Z,1516721128.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:28.834Z,1516721128.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:29.217Z,1516721129.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:29.233Z,1516721129.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:29.620Z,1516721129.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:29.635Z,1516721129.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:30.009Z,1516721130.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:30.024Z,1516721130.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:30.404Z,1516721130.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:30.431Z,1516721130.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:30.808Z,1516721130.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:30.829Z,1516721130.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:31.204Z,1516721131.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:31.237Z,1516721131.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:31.604Z,1516721131.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:31.626Z,1516721131.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:32.018Z,1516721132.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:32.041Z,1516721132.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:32.422Z,1516721132.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:32.437Z,1516721132.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:32.818Z,1516721132.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:32.834Z,1516721132.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:33.205Z,1516721133.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:33.237Z,1516721133.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:33.611Z,1516721133.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:33.626Z,1516721133.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:34.001Z,1516721134.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:34.038Z,1516721134.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:34.401Z,1516721134.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:34.433Z,1516721134.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:34.820Z,1516721134.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:34.835Z,1516721134.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:35.220Z,1516721135.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:35.242Z,1516721135.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:35.627Z,1516721135.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:35.642Z,1516721135.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:36.001Z,1516721136.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:36.028Z,1516721136.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:36.405Z,1516721136.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:36.442Z,1516721136.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:36.802Z,1516721136.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:36.817Z,1516721136.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:37.203Z,1516721137.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:37.218Z,1516721137.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:37.610Z,1516721137.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:37.625Z,1516721137.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:38.020Z,1516721138.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:38.057Z,1516721138.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:38.424Z,1516721138.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:38.454Z,1516721138.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:38.813Z,1516721138.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:38.828Z,1516721138.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:39.210Z,1516721139.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:39.226Z,1516721139.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:39.609Z,1516721139.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:39.626Z,1516721139.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:40.008Z,1516721140.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:40.024Z,1516721140.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:40.406Z,1516721140.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:40.430Z,1516721140.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:40.818Z,1516721140.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:40.834Z,1516721140.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:41.218Z,1516721141.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:41.234Z,1516721141.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:41.619Z,1516721141.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:41.637Z,1516721141.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:42.004Z,1516721142.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:42.029Z,1516721142.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:42.404Z,1516721142.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:42.427Z,1516721142.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:42.809Z,1516721142.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:42.824Z,1516721142.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:43.204Z,1516721143.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:43.237Z,1516721143.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:43.604Z,1516721143.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:43.626Z,1516721143.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:44.020Z,1516721144.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:44.035Z,1516721144.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:44.423Z,1516721144.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:44.438Z,1516721144.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:44.819Z,1516721144.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:44.834Z,1516721144.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:45.210Z,1516721145.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:45.225Z,1516721145.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:45.605Z,1516721145.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:45.628Z,1516721145.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:46.009Z,1516721146.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:46.028Z,1516721146.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:46.410Z,1516721146.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:46.425Z,1516721146.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:46.820Z,1516721146.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:46.835Z,1516721146.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:47.219Z,1516721147.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:47.239Z,1516721147.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:47.620Z,1516721147.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:47.635Z,1516721147.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:48.000Z,1516721148.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:48.028Z,1516721148.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:48.400Z,1516721148.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:48.437Z,1516721148.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:48.804Z,1516721148.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:48.833Z,1516721148.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:49.205Z,1516721149.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:49.232Z,1516721149.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:49.608Z,1516721149.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:49.635Z,1516721149.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:50.021Z,1516721150.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:50.037Z,1516721150.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:50.423Z,1516721150.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:50.440Z,1516721150.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:50.815Z,1516721150.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:50.838Z,1516721150.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:51.200Z,1516721151.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:51.234Z,1516721151.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:51.600Z,1516721151.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:51.633Z,1516721151.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:52.001Z,1516721152.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:52.032Z,1516721152.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:52.399Z,1516721152.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:52.438Z,1516721152.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:52.819Z,1516721152.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:52.834Z,1516721152.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:53.222Z,1516721153.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:53.245Z,1516721153.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:53.621Z,1516721153.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:53.648Z,1516721153.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:56.705Z,1516721156.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:56.728Z,1516721156.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:56.832Z,1516721156.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:56.872Z,1516721156.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:57.183Z,1516721157.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:57.198Z,1516721157.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:57.595Z,1516721157.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:57.630Z,1516721157.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:57.983Z,1516721157.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:57.998Z,1516721157.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:58.380Z,1516721158.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:58.395Z,1516721158.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:58.780Z,1516721158.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:58.796Z,1516721158.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:59.178Z,1516721159.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:59.205Z,1516721159.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:59.584Z,1516721159.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:25:59.600Z,1516721159.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:25:59.987Z,1516721159.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:00.002Z,1516721160.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:00.385Z,1516721160.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:00.405Z,1516721160.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:00.786Z,1516721160.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:00.805Z,1516721160.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:01.185Z,1516721161.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:01.201Z,1516721161.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:01.580Z,1516721161.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:01.601Z,1516721161.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:01.984Z,1516721161.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:01.999Z,1516721161.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:02.381Z,1516721162.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:02.397Z,1516721162.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:02.786Z,1516721162.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:02.805Z,1516721162.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:03.187Z,1516721163.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:03.202Z,1516721163.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:03.586Z,1516721163.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:03.602Z,1516721163.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:03.980Z,1516721163.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:03.999Z,1516721163.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:04.380Z,1516721164.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:04.395Z,1516721164.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:04.786Z,1516721164.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:04.802Z,1516721164.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:05.187Z,1516721165.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:05.202Z,1516721165.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:05.585Z,1516721165.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:05.605Z,1516721165.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:05.982Z,1516721165.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:05.997Z,1516721165.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:06.380Z,1516721166.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:06.395Z,1516721166.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:06.785Z,1516721166.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:06.805Z,1516721166.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:07.187Z,1516721167.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:07.202Z,1516721167.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:07.586Z,1516721167.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:07.601Z,1516721167.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:07.977Z,1516721167.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:07.999Z,1516721167.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:08.381Z,1516721168.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:08.405Z,1516721168.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:08.788Z,1516721168.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:08.803Z,1516721168.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:09.187Z,1516721169.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:09.202Z,1516721169.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:09.587Z,1516721169.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:09.603Z,1516721169.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:09.982Z,1516721169.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:10.005Z,1516721170.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:10.382Z,1516721170.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:10.397Z,1516721170.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:10.788Z,1516721170.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:10.803Z,1516721170.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:11.187Z,1516721171.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:11.202Z,1516721171.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:11.599Z,1516721171.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:11.630Z,1516721171.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:11.987Z,1516721171.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:12.003Z,1516721172.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:12.380Z,1516721172.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:12.407Z,1516721172.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:12.796Z,1516721172.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:12.817Z,1516721172.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:13.195Z,1516721173.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:13.217Z,1516721173.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:13.595Z,1516721173.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:13.610Z,1516721173.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:13.992Z,1516721173.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:14.013Z,1516721174.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:14.387Z,1516721174.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:14.403Z,1516721174.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:14.789Z,1516721174.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:14.808Z,1516721174.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:15.190Z,1516721175.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:15.218Z,1516721175.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:15.583Z,1516721175.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:15.613Z,1516721175.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:15.968Z,1516721175.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:16.009Z,1516721176.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:16.373Z,1516721176.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:16.388Z,1516721176.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:16.772Z,1516721176.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:16.787Z,1516721176.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:17.195Z,1516721177.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:17.229Z,1516721177.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:17.608Z,1516721177.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:17.629Z,1516721177.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:17.987Z,1516721177.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:18.026Z,1516721178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:18.378Z,1516721178.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:18.393Z,1516721178.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:18.799Z,1516721178.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:18.830Z,1516721178.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:19.184Z,1516721179.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:19.201Z,1516721179.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:19.589Z,1516721179.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:19.612Z,1516721179.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:20.005Z,1516721180.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:20.037Z,1516721180.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:20.393Z,1516721180.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:20.449Z,1516721180.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:20.794Z,1516721180.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:20.822Z,1516721180.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:21.174Z,1516721181.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:21.212Z,1516721181.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:21.574Z,1516721181.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:21.613Z,1516721181.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:21.973Z,1516721181.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:22.005Z,1516721182.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:22.373Z,1516721182.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:22.409Z,1516721182.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:22.772Z,1516721182.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:22.808Z,1516721182.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:23.194Z,1516721183.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:23.218Z,1516721183.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:23.604Z,1516721183.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:23.627Z,1516721183.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:24.008Z,1516721184.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:24.071Z,1516721184.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:24.391Z,1516721184.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:24.431Z,1516721184.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:24.791Z,1516721184.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:24.830Z,1516721184.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:25.195Z,1516721185.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:25.252Z,1516721185.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:25.579Z,1516721185.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:25.602Z,1516721185.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:25.992Z,1516721185.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:26.037Z,1516721186.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:26.405Z,1516721186.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:26.483Z,1516721186.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:26.785Z,1516721186.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:26.860Z,1516721186.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:27.187Z,1516721187.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:27.226Z,1516721187.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:27.579Z,1516721187.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:27.641Z,1516721187.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:27.983Z,1516721187.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:28.030Z,1516721188.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:28.383Z,1516721188.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:28.402Z,1516721188.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:28.778Z,1516721188.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:28.835Z,1516721188.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:29.181Z,1516721189.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:29.205Z,1516721189.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:29.597Z,1516721189.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:29.629Z,1516721189.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:29.997Z,1516721189.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:30.035Z,1516721190.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:30.379Z,1516721190.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:30.402Z,1516721190.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:30.786Z,1516721190.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:30.805Z,1516721190.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:31.180Z,1516721191.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:31.238Z,1516721191.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:31.583Z,1516721191.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:31.610Z,1516721191.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:31.996Z,1516721191.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:32.015Z,1516721192.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:32.397Z,1516721192.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:32.424Z,1516721192.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:32.797Z,1516721192.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:32.817Z,1516721192.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:33.199Z,1516721193.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:33.227Z,1516721193.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:33.574Z,1516721193.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:33.646Z,1516721193.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:33.999Z,1516721193.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:34.031Z,1516721194.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:34.379Z,1516721194.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:34.414Z,1516721194.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:34.777Z,1516721194.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:34.829Z,1516721194.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:35.190Z,1516721195.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:35.229Z,1516721195.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:35.610Z,1516721195.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:35.641Z,1516721195.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:35.993Z,1516721195.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:36.039Z,1516721196.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:36.388Z,1516721196.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:36.411Z,1516721196.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:36.795Z,1516721196.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:36.852Z,1516721196.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:37.175Z,1516721197.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:37.228Z,1516721197.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:37.598Z,1516721197.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:37.613Z,1516721197.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:37.992Z,1516721197.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:38.015Z,1516721198.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:38.404Z,1516721198.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:38.419Z,1516721198.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:38.799Z,1516721198.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:38.814Z,1516721198.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:39.173Z,1516721199.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:39.208Z,1516721199.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:39.575Z,1516721199.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:39.605Z,1516721199.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:39.980Z,1516721199.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:40.007Z,1516721200.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:40.393Z,1516721200.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:40.408Z,1516721200.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:40.772Z,1516721200.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:40.806Z,1516721200.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:41.188Z,1516721201.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:41.210Z,1516721201.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:41.605Z,1516721201.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:41.625Z,1516721201.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:41.000Z,1516721202.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:42.014Z,1516721202.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:42.373Z,1516721202.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:42.404Z,1516721202.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:42.775Z,1516721202.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:42.802Z,1516721202.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:43.175Z,1516721203.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:43.210Z,1516721203.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:43.581Z,1516721203.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:43.607Z,1516721203.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:43.991Z,1516721203.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:44.006Z,1516721204.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:44.396Z,1516721204.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:44.411Z,1516721204.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:44.795Z,1516721204.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:44.810Z,1516721204.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:45.180Z,1516721205.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:45.206Z,1516721205.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:45.573Z,1516721205.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:45.606Z,1516721205.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:45.975Z,1516721205.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:46.001Z,1516721206.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:46.375Z,1516721206.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:46.401Z,1516721206.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:46.780Z,1516721206.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:46.808Z,1516721206.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:47.199Z,1516721207.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:47.214Z,1516721207.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:47.593Z,1516721207.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:47.616Z,1516721207.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:47.984Z,1516721207.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:48.011Z,1516721208.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:48.381Z,1516721208.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:48.407Z,1516721208.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:48.784Z,1516721208.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:48.817Z,1516721208.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:49.174Z,1516721209.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:49.210Z,1516721209.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:49.575Z,1516721209.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:49.606Z,1516721209.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:49.987Z,1516721209.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:50.021Z,1516721210.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:50.401Z,1516721210.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:50.416Z,1516721210.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:50.785Z,1516721210.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:50.811Z,1516721210.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:51.187Z,1516721211.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:51.214Z,1516721211.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:51.579Z,1516721211.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:51.617Z,1516721211.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:51.971Z,1516721211.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:51.986Z,1516721211.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:52.472Z,1516721212.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:52.487Z,1516721212.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:52.780Z,1516721212.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:52.795Z,1516721212.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:53.195Z,1516721213.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:53.240Z,1516721213.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:53.599Z,1516721213.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:53.625Z,1516721213.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:53.991Z,1516721213.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:54.018Z,1516721214.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:57.191Z,1516721217.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:57.219Z,1516721217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:57.313Z,1516721217.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:57.353Z,1516721217.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:57.676Z,1516721217.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:57.691Z,1516721217.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:58.090Z,1516721218.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:58.105Z,1516721218.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:58.484Z,1516721218.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:58.513Z,1516721218.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:58.872Z,1516721218.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:58.895Z,1516721218.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:59.274Z,1516721219.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:59.289Z,1516721219.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:26:59.669Z,1516721219.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:26:59.689Z,1516721219.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:00.076Z,1516721220.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:00.091Z,1516721220.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:00.476Z,1516721220.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:00.497Z,1516721220.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:00.876Z,1516721220.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:00.892Z,1516721220.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:01.268Z,1516721221.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:01.300Z,1516721221.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:01.670Z,1516721221.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:01.686Z,1516721221.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:02.065Z,1516721222.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:02.086Z,1516721222.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:02.468Z,1516721222.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:02.485Z,1516721222.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:02.879Z,1516721222.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:02.901Z,1516721222.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:03.283Z,1516721223.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:03.305Z,1516721223.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:03.680Z,1516721223.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:03.697Z,1516721223.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:04.061Z,1516721224.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:04.099Z,1516721224.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:04.460Z,1516721224.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:04.494Z,1516721224.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:04.878Z,1516721224.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:04.901Z,1516721224.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:05.284Z,1516721225.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:05.300Z,1516721225.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:05.678Z,1516721225.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:05.700Z,1516721225.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:06.078Z,1516721226.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:06.093Z,1516721226.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:06.461Z,1516721226.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:06.489Z,1516721226.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:06.880Z,1516721226.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:06.895Z,1516721226.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:07.283Z,1516721227.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:07.298Z,1516721227.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:07.680Z,1516721227.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:07.706Z,1516721227.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:08.061Z,1516721228.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:08.089Z,1516721228.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:08.460Z,1516721228.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:08.489Z,1516721228.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:08.881Z,1516721228.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:08.896Z,1516721228.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:09.283Z,1516721229.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:09.302Z,1516721229.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:09.688Z,1516721229.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:09.702Z,1516721229.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:10.061Z,1516721230.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:10.095Z,1516721230.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:10.465Z,1516721230.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:10.492Z,1516721230.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:10.880Z,1516721230.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:10.895Z,1516721230.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:11.284Z,1516721231.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:11.299Z,1516721231.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:11.680Z,1516721231.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:11.701Z,1516721231.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:12.061Z,1516721232.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:12.097Z,1516721232.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:12.460Z,1516721232.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:12.488Z,1516721232.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:12.880Z,1516721232.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:12.895Z,1516721232.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:13.280Z,1516721233.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:13.307Z,1516721233.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:13.671Z,1516721233.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:13.699Z,1516721233.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:14.061Z,1516721234.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:14.092Z,1516721234.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:14.464Z,1516721234.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:14.504Z,1516721234.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:14.871Z,1516721234.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:14.906Z,1516721234.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:15.275Z,1516721235.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:15.301Z,1516721235.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:15.671Z,1516721235.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:15.706Z,1516721235.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:16.060Z,1516721236.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:16.105Z,1516721236.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:16.461Z,1516721236.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:16.476Z,1516721236.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:16.860Z,1516721236.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:16.881Z,1516721236.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:17.279Z,1516721237.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:17.305Z,1516721237.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:17.683Z,1516721237.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:17.713Z,1516721237.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:18.084Z,1516721238.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:18.113Z,1516721238.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:18.465Z,1516721238.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:18.485Z,1516721238.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:18.865Z,1516721238.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:18.881Z,1516721238.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:19.266Z,1516721239.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:19.285Z,1516721239.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:19.665Z,1516721239.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:19.680Z,1516721239.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:20.075Z,1516721240.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:20.113Z,1516721240.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:20.483Z,1516721240.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:20.498Z,1516721240.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:20.875Z,1516721240.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:20.889Z,1516721240.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:21.273Z,1516721241.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:21.297Z,1516721241.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:21.672Z,1516721241.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:21.689Z,1516721241.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:22.065Z,1516721242.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:22.096Z,1516721242.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:22.473Z,1516721242.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:22.489Z,1516721242.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:22.868Z,1516721242.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:22.883Z,1516721242.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:23.278Z,1516721243.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:23.293Z,1516721243.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:23.692Z,1516721243.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:23.723Z,1516721243.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:24.082Z,1516721244.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:24.097Z,1516721244.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:24.477Z,1516721244.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:24.492Z,1516721244.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:24.873Z,1516721244.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:24.888Z,1516721244.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:25.265Z,1516721245.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:25.288Z,1516721245.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:25.670Z,1516721245.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:25.692Z,1516721245.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:26.082Z,1516721246.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:26.097Z,1516721246.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:26.482Z,1516721246.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:26.497Z,1516721246.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:26.879Z,1516721246.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:26.908Z,1516721246.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:27.270Z,1516721247.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:27.285Z,1516721247.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:27.672Z,1516721247.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:27.709Z,1516721247.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:28.069Z,1516721248.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:28.084Z,1516721248.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:28.470Z,1516721248.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:28.486Z,1516721248.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:28.866Z,1516721248.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:28.888Z,1516721248.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:29.283Z,1516721249.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:29.317Z,1516721249.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:29.680Z,1516721249.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:29.694Z,1516721249.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:30.072Z,1516721250.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:30.087Z,1516721250.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:30.468Z,1516721250.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:30.483Z,1516721250.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:30.877Z,1516721250.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:30.897Z,1516721250.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:31.272Z,1516721251.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:31.301Z,1516721251.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:31.673Z,1516721251.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:31.688Z,1516721251.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:32.078Z,1516721252.078 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:32.101Z,1516721252.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:32.480Z,1516721252.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:32.494Z,1516721252.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:32.879Z,1516721252.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:32.900Z,1516721252.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:33.270Z,1516721253.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:33.286Z,1516721253.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:33.664Z,1516721253.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:33.686Z,1516721253.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:34.072Z,1516721254.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:34.087Z,1516721254.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:34.481Z,1516721254.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:34.501Z,1516721254.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:34.876Z,1516721254.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:34.897Z,1516721254.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:35.282Z,1516721255.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:35.296Z,1516721255.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:35.683Z,1516721255.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:35.698Z,1516721255.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:36.084Z,1516721256.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:36.099Z,1516721256.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:36.471Z,1516721256.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:36.490Z,1516721256.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:36.867Z,1516721256.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:36.888Z,1516721256.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:37.282Z,1516721257.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:37.297Z,1516721257.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:37.680Z,1516721257.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:37.695Z,1516721257.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:38.080Z,1516721258.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:38.107Z,1516721258.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:38.487Z,1516721258.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:38.502Z,1516721258.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:38.888Z,1516721258.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:38.903Z,1516721258.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:39.278Z,1516721259.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:39.294Z,1516721259.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:39.682Z,1516721259.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:39.697Z,1516721259.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:40.061Z,1516721260.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:40.104Z,1516721260.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:40.464Z,1516721260.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:40.492Z,1516721260.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:40.863Z,1516721260.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:40.887Z,1516721260.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:41.276Z,1516721261.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:41.314Z,1516721261.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:41.671Z,1516721261.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:41.701Z,1516721261.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:42.095Z,1516721262.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:42.110Z,1516721262.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:42.469Z,1516721262.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:42.503Z,1516721262.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:42.867Z,1516721262.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:42.882Z,1516721262.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:43.273Z,1516721263.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:43.308Z,1516721263.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:43.310Z,1516721263.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:43.310Z,1516721263.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 243 2018-01-23T15:27:43.315Z,1516721263.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:27:43.335Z,1516721263.335 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:27:43.671Z,1516721263.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:43.685Z,1516721263.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:43.723Z,1516721263.723 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:27:43.723Z,1516721263.723 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 243 2018-01-23T15:27:44.074Z,1516721264.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:44.105Z,1516721264.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:44.106Z,1516721264.106 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:27:44.111Z,1516721264.111 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:27:44.111Z,1516721264.111 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:27:44.487Z,1516721264.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:44.502Z,1516721264.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:44.884Z,1516721264.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:44.899Z,1516721264.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:45.271Z,1516721265.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:45.292Z,1516721265.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:45.671Z,1516721265.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:45.687Z,1516721265.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:46.073Z,1516721266.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:46.089Z,1516721266.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:46.468Z,1516721266.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:46.491Z,1516721266.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:46.861Z,1516721266.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:46.897Z,1516721266.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:47.286Z,1516721267.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:47.308Z,1516721267.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:47.681Z,1516721267.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:47.701Z,1516721267.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:48.091Z,1516721268.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:48.113Z,1516721268.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:48.462Z,1516721268.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:48.495Z,1516721268.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:48.860Z,1516721268.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:48.900Z,1516721268.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:49.267Z,1516721269.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:49.311Z,1516721269.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:49.672Z,1516721269.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:49.701Z,1516721269.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:50.086Z,1516721270.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:50.109Z,1516721270.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:50.478Z,1516721270.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:50.520Z,1516721270.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:50.886Z,1516721270.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:50.901Z,1516721270.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:51.276Z,1516721271.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:51.293Z,1516721271.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:51.660Z,1516721271.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:51.705Z,1516721271.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:52.076Z,1516721272.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:52.084Z,1516721272.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x39140 got:0x32768 2018-01-23T15:27:52.101Z,1516721272.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:52.461Z,1516721272.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:52.487Z,1516721272.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:52.862Z,1516721272.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:52.893Z,1516721272.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:53.288Z,1516721273.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:53.302Z,1516721273.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:53.678Z,1516721273.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:53.708Z,1516721273.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:54.081Z,1516721274.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:54.097Z,1516721274.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:57.175Z,1516721277.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:57.190Z,1516721277.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:57.192Z,1516721277.192 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:57.192Z,1516721277.192 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 243 2018-01-23T15:27:57.192Z,1516721277.192 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:27:57.204Z,1516721277.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:27:57.308Z,1516721277.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:57.332Z,1516721277.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:57.332Z,1516721277.332 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 243 2018-01-23T15:27:57.332Z,1516721277.332 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:27:57.354Z,1516721277.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:27:57.354Z,1516721277.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:27:57.354Z,1516721277.354 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 243 2018-01-23T15:27:57.646Z,1516721277.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:57.687Z,1516721277.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:27:57.688Z,1516721277.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:27:57.688Z,1516721277.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:27:57.700Z,1516721277.700 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:27:57.700Z,1516721277.700 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 243 2018-01-23T15:27:58.052Z,1516721278.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:58.090Z,1516721278.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:27:58.090Z,1516721278.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:27:58.091Z,1516721278.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:27:58.445Z,1516721278.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:58.464Z,1516721278.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s. 2018-01-23T15:27:58.465Z,1516721278.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:58.840Z,1516721278.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:58.855Z,1516721278.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s. 2018-01-23T15:27:58.856Z,1516721278.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:59.242Z,1516721279.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:59.260Z,1516721279.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s. 2018-01-23T15:27:59.261Z,1516721279.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:27:59.636Z,1516721279.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:27:59.656Z,1516721279.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s. 2018-01-23T15:27:59.657Z,1516721279.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:00.046Z,1516721280.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:00.064Z,1516721280.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s. 2018-01-23T15:28:00.065Z,1516721280.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:00.450Z,1516721280.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:00.467Z,1516721280.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s. 2018-01-23T15:28:00.469Z,1516721280.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:00.847Z,1516721280.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:00.878Z,1516721280.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s. 2018-01-23T15:28:00.888Z,1516721280.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:01.244Z,1516721281.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:01.264Z,1516721281.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T15:28:01.265Z,1516721281.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:01.638Z,1516721281.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:01.664Z,1516721281.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s. 2018-01-23T15:28:01.665Z,1516721281.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:02.037Z,1516721282.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:02.056Z,1516721282.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T15:28:02.057Z,1516721282.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:02.440Z,1516721282.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:02.461Z,1516721282.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s. 2018-01-23T15:28:02.463Z,1516721282.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:02.841Z,1516721282.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:02.855Z,1516721282.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s. 2018-01-23T15:28:02.856Z,1516721282.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:03.251Z,1516721283.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:03.265Z,1516721283.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s. 2018-01-23T15:28:03.266Z,1516721283.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:03.650Z,1516721283.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:03.670Z,1516721283.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T15:28:03.671Z,1516721283.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:04.052Z,1516721284.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:04.070Z,1516721284.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T15:28:04.071Z,1516721284.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:04.436Z,1516721284.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:04.458Z,1516721284.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T15:28:04.459Z,1516721284.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:04.835Z,1516721284.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:04.866Z,1516721284.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T15:28:04.867Z,1516721284.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:05.242Z,1516721285.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:05.256Z,1516721285.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s. 2018-01-23T15:28:05.257Z,1516721285.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:05.630Z,1516721285.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:05.657Z,1516721285.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T15:28:05.658Z,1516721285.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:06.051Z,1516721286.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:06.066Z,1516721286.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T15:28:06.067Z,1516721286.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:06.458Z,1516721286.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:06.473Z,1516721286.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T15:28:06.473Z,1516721286.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:06.848Z,1516721286.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:06.869Z,1516721286.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T15:28:06.870Z,1516721286.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:07.233Z,1516721287.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:07.258Z,1516721287.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T15:28:07.259Z,1516721287.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:07.632Z,1516721287.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:07.666Z,1516721287.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T15:28:07.667Z,1516721287.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:08.030Z,1516721288.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:08.057Z,1516721288.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T15:28:08.058Z,1516721288.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:08.433Z,1516721288.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:08.464Z,1516721288.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T15:28:08.465Z,1516721288.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:08.831Z,1516721288.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:08.846Z,1516721288.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T15:28:08.875Z,1516721288.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:09.247Z,1516721289.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:09.273Z,1516721289.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T15:28:09.274Z,1516721289.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:09.648Z,1516721289.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:09.681Z,1516721289.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T15:28:09.682Z,1516721289.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:10.042Z,1516721290.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:10.079Z,1516721290.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T15:28:10.080Z,1516721290.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:10.430Z,1516721290.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:10.445Z,1516721290.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T15:28:10.446Z,1516721290.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:10.832Z,1516721290.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:10.852Z,1516721290.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T15:28:10.853Z,1516721290.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:11.239Z,1516721291.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:11.253Z,1516721291.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T15:28:11.254Z,1516721291.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:11.637Z,1516721291.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:11.685Z,1516721291.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:28:11.688Z,1516721291.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:12.055Z,1516721292.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:12.083Z,1516721292.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:28:12.084Z,1516721292.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:12.459Z,1516721292.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:12.484Z,1516721292.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:28:12.485Z,1516721292.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:12.847Z,1516721292.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:12.862Z,1516721292.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T15:28:12.879Z,1516721292.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:13.243Z,1516721293.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:13.257Z,1516721293.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T15:28:13.258Z,1516721293.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:13.642Z,1516721293.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:13.657Z,1516721293.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T15:28:13.657Z,1516721293.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:14.037Z,1516721294.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:14.059Z,1516721294.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T15:28:14.060Z,1516721294.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:14.440Z,1516721294.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:14.460Z,1516721294.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T15:28:14.461Z,1516721294.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:14.843Z,1516721294.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:14.857Z,1516721294.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T15:28:14.858Z,1516721294.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:15.246Z,1516721295.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:15.268Z,1516721295.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T15:28:15.269Z,1516721295.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:15.651Z,1516721295.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:15.672Z,1516721295.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T15:28:15.673Z,1516721295.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:16.052Z,1516721296.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:16.067Z,1516721296.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T15:28:16.068Z,1516721296.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:16.430Z,1516721296.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:16.462Z,1516721296.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T15:28:16.467Z,1516721296.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:16.844Z,1516721296.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:16.864Z,1516721296.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T15:28:16.865Z,1516721296.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:17.233Z,1516721297.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:17.262Z,1516721297.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T15:28:17.263Z,1516721297.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:17.630Z,1516721297.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:17.676Z,1516721297.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:18.052Z,1516721298.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:18.068Z,1516721298.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:18.456Z,1516721298.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:18.472Z,1516721298.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:18.852Z,1516721298.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:18.873Z,1516721298.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:19.232Z,1516721299.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:19.265Z,1516721299.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:19.632Z,1516721299.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:19.677Z,1516721299.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:20.032Z,1516721300.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:20.069Z,1516721300.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:20.433Z,1516721300.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:20.461Z,1516721300.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:20.832Z,1516721300.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:20.867Z,1516721300.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:21.251Z,1516721301.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:21.267Z,1516721301.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:21.663Z,1516721301.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:21.678Z,1516721301.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:22.053Z,1516721302.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:22.068Z,1516721302.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:22.431Z,1516721302.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:22.454Z,1516721302.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:22.833Z,1516721302.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:22.869Z,1516721302.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:23.234Z,1516721303.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:23.274Z,1516721303.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:23.630Z,1516721303.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:23.655Z,1516721303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:24.044Z,1516721304.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:24.071Z,1516721304.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:24.448Z,1516721304.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:24.484Z,1516721304.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:24.843Z,1516721304.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:24.881Z,1516721304.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:25.232Z,1516721305.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:25.275Z,1516721305.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:25.637Z,1516721305.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:25.652Z,1516721305.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:26.032Z,1516721306.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:26.055Z,1516721306.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:26.446Z,1516721306.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:26.461Z,1516721306.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:26.841Z,1516721306.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:26.856Z,1516721306.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:27.246Z,1516721307.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:27.265Z,1516721307.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:27.650Z,1516721307.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:27.669Z,1516721307.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:28.050Z,1516721308.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:28.065Z,1516721308.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:28.436Z,1516721308.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:28.458Z,1516721308.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:28.836Z,1516721308.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:28.863Z,1516721308.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:29.242Z,1516721309.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:29.257Z,1516721309.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:29.630Z,1516721309.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:29.662Z,1516721309.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:30.055Z,1516721310.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:30.070Z,1516721310.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:30.456Z,1516721310.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:30.470Z,1516721310.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:30.851Z,1516721310.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:30.866Z,1516721310.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:31.233Z,1516721311.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:31.265Z,1516721311.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:31.632Z,1516721311.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:31.673Z,1516721311.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:32.048Z,1516721312.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:32.075Z,1516721312.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:32.459Z,1516721312.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:32.474Z,1516721312.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:32.846Z,1516721312.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:32.878Z,1516721312.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:33.233Z,1516721313.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:33.259Z,1516721313.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:33.632Z,1516721313.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:33.665Z,1516721313.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:34.050Z,1516721314.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:34.066Z,1516721314.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:34.455Z,1516721314.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:34.470Z,1516721314.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:34.851Z,1516721314.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:34.866Z,1516721314.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:35.233Z,1516721315.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:35.272Z,1516721315.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:35.630Z,1516721315.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:35.654Z,1516721315.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:36.051Z,1516721316.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:36.066Z,1516721316.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:36.455Z,1516721316.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:36.476Z,1516721316.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:36.848Z,1516721316.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:36.870Z,1516721316.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:37.233Z,1516721317.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:37.265Z,1516721317.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:37.633Z,1516721317.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:37.670Z,1516721317.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:38.043Z,1516721318.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:38.081Z,1516721318.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:38.456Z,1516721318.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:38.471Z,1516721318.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:38.843Z,1516721318.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:38.882Z,1516721318.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:39.233Z,1516721319.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:39.265Z,1516721319.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:39.636Z,1516721319.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:39.672Z,1516721319.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:40.043Z,1516721320.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:40.078Z,1516721320.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:40.443Z,1516721320.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:40.469Z,1516721320.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:40.843Z,1516721320.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:40.878Z,1516721320.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:41.233Z,1516721321.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:41.274Z,1516721321.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:41.632Z,1516721321.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:41.669Z,1516721321.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:42.047Z,1516721322.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:42.073Z,1516721322.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:42.447Z,1516721322.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:42.489Z,1516721322.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:42.847Z,1516721322.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:42.883Z,1516721322.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:43.238Z,1516721323.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:43.257Z,1516721323.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:43.640Z,1516721323.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:43.655Z,1516721323.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:44.047Z,1516721324.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:44.063Z,1516721324.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:44.455Z,1516721324.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:44.470Z,1516721324.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:44.846Z,1516721324.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:44.862Z,1516721324.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:45.246Z,1516721325.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:45.261Z,1516721325.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:45.641Z,1516721325.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:45.661Z,1516721325.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:46.046Z,1516721326.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:46.062Z,1516721326.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:46.448Z,1516721326.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:46.462Z,1516721326.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:46.845Z,1516721326.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:46.865Z,1516721326.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:47.240Z,1516721327.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:47.267Z,1516721327.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:47.644Z,1516721327.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:47.665Z,1516721327.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:48.050Z,1516721328.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:48.069Z,1516721328.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:48.451Z,1516721328.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:48.466Z,1516721328.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:48.850Z,1516721328.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:48.865Z,1516721328.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:49.237Z,1516721329.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:49.260Z,1516721329.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:49.642Z,1516721329.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:49.657Z,1516721329.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:50.047Z,1516721330.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:50.071Z,1516721330.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:50.454Z,1516721330.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:50.477Z,1516721330.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:50.852Z,1516721330.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:50.867Z,1516721330.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:51.240Z,1516721331.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:51.260Z,1516721331.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:51.635Z,1516721331.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:51.673Z,1516721331.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:52.055Z,1516721332.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:52.071Z,1516721332.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:52.456Z,1516721332.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:52.470Z,1516721332.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:52.853Z,1516721332.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:52.868Z,1516721332.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:53.234Z,1516721333.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:53.269Z,1516721333.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:53.637Z,1516721333.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:53.680Z,1516721333.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:53.683Z,1516721333.683 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:28:53.683Z,1516721333.683 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:28:53.683Z,1516721333.683 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:28:53.683Z,1516721333.683 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:28:54.052Z,1516721334.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:54.079Z,1516721334.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:54.082Z,1516721334.082 [Default:CheckIn:D] Stopped 2018-01-23T15:28:54.082Z,1516721334.082 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:28:54.456Z,1516721334.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:54.479Z,1516721334.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:54.487Z,1516721334.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 731.033724 min 2018-01-23T15:28:54.487Z,1516721334.487 [Default:CheckIn:E] Stopped 2018-01-23T15:28:54.487Z,1516721334.487 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:28:54.487Z,1516721334.487 [Default:CheckIn] Stopped 2018-01-23T15:28:54.487Z,1516721334.487 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:28:54.488Z,1516721334.488 [Default:CheckIn](INFO): Running loop #72 2018-01-23T15:28:54.488Z,1516721334.488 [Default:CheckIn] Running Loop=72 2018-01-23T15:28:54.488Z,1516721334.488 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:28:54.488Z,1516721334.488 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:28:57.544Z,1516721337.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:57.567Z,1516721337.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:57.677Z,1516721337.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:57.724Z,1516721337.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:58.018Z,1516721338.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:58.033Z,1516721338.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:58.419Z,1516721338.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:58.434Z,1516721338.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:58.812Z,1516721338.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:58.839Z,1516721338.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:59.223Z,1516721339.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:59.239Z,1516721339.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:28:59.624Z,1516721339.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:28:59.645Z,1516721339.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:00.022Z,1516721340.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:00.037Z,1516721340.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:00.413Z,1516721340.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:00.439Z,1516721340.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:00.816Z,1516721340.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:00.832Z,1516721340.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:01.216Z,1516721341.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:01.232Z,1516721341.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:01.612Z,1516721341.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:01.645Z,1516721341.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:02.021Z,1516721342.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:02.037Z,1516721342.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:02.424Z,1516721342.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:02.444Z,1516721342.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:02.825Z,1516721342.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:02.845Z,1516721342.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:03.227Z,1516721343.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:03.249Z,1516721343.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:03.614Z,1516721343.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:03.629Z,1516721343.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:04.016Z,1516721344.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:04.034Z,1516721344.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:04.418Z,1516721344.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:04.433Z,1516721344.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:04.817Z,1516721344.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:04.832Z,1516721344.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:05.222Z,1516721345.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:05.253Z,1516721345.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:05.630Z,1516721345.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:05.645Z,1516721345.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:06.026Z,1516721346.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:06.042Z,1516721346.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:06.416Z,1516721346.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:06.435Z,1516721346.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:06.817Z,1516721346.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:06.836Z,1516721346.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:07.221Z,1516721347.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:07.241Z,1516721347.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:07.621Z,1516721347.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:07.637Z,1516721347.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:08.017Z,1516721348.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:08.036Z,1516721348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:08.426Z,1516721348.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:08.442Z,1516721348.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:08.830Z,1516721348.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:08.845Z,1516721348.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:09.227Z,1516721349.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:09.242Z,1516721349.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:09.606Z,1516721349.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:09.634Z,1516721349.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:10.020Z,1516721350.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:10.035Z,1516721350.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:10.409Z,1516721350.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:10.445Z,1516721350.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:10.806Z,1516721350.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:10.841Z,1516721350.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:11.224Z,1516721351.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:11.251Z,1516721351.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:11.636Z,1516721351.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:11.651Z,1516721351.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:12.024Z,1516721352.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:12.045Z,1516721352.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:12.436Z,1516721352.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:12.457Z,1516721352.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:12.809Z,1516721352.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:12.842Z,1516721352.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:13.213Z,1516721353.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:13.239Z,1516721353.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:13.609Z,1516721353.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:13.641Z,1516721353.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:14.013Z,1516721354.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:14.046Z,1516721354.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:14.419Z,1516721354.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:14.453Z,1516721354.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:14.831Z,1516721354.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:14.847Z,1516721354.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:15.219Z,1516721355.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:15.254Z,1516721355.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:15.606Z,1516721355.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:15.621Z,1516721355.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:16.009Z,1516721356.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:16.024Z,1516721356.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:16.408Z,1516721356.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:16.429Z,1516721356.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:16.810Z,1516721356.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:16.825Z,1516721356.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:17.231Z,1516721357.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:17.261Z,1516721357.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:17.646Z,1516721357.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:17.673Z,1516721357.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:18.023Z,1516721358.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:18.054Z,1516721358.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:18.416Z,1516721358.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:18.437Z,1516721358.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:18.818Z,1516721358.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:18.833Z,1516721358.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:19.214Z,1516721359.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:19.237Z,1516721359.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:19.618Z,1516721359.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:19.634Z,1516721359.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:20.014Z,1516721360.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:20.038Z,1516721360.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:20.422Z,1516721360.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:20.445Z,1516721360.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:20.824Z,1516721360.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:20.845Z,1516721360.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:21.227Z,1516721361.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:21.242Z,1516721361.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:21.612Z,1516721361.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:21.632Z,1516721361.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:22.013Z,1516721362.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:22.034Z,1516721362.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:22.413Z,1516721362.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:22.440Z,1516721362.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:22.821Z,1516721362.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:22.841Z,1516721362.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:23.224Z,1516721363.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:23.243Z,1516721363.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:23.632Z,1516721363.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:23.656Z,1516721363.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:24.027Z,1516721364.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:24.042Z,1516721364.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:24.408Z,1516721364.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:24.445Z,1516721364.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:24.809Z,1516721364.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:24.845Z,1516721364.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:25.213Z,1516721365.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:25.239Z,1516721365.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:25.609Z,1516721365.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:25.641Z,1516721365.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:26.013Z,1516721366.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:26.046Z,1516721366.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:26.420Z,1516721366.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:26.454Z,1516721366.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:26.832Z,1516721366.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:26.847Z,1516721366.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:27.219Z,1516721367.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:27.256Z,1516721367.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:27.609Z,1516721367.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:27.645Z,1516721367.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:28.007Z,1516721368.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:28.044Z,1516721368.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:28.410Z,1516721368.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:28.437Z,1516721368.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:28.809Z,1516721368.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:28.845Z,1516721368.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:29.219Z,1516721369.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:29.251Z,1516721369.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:29.627Z,1516721369.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:29.673Z,1516721369.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:30.031Z,1516721370.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:30.061Z,1516721370.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:30.421Z,1516721370.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:30.456Z,1516721370.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:30.815Z,1516721370.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:30.830Z,1516721370.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:31.221Z,1516721371.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:31.257Z,1516721371.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:31.614Z,1516721371.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:31.630Z,1516721371.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:32.013Z,1516721372.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:32.033Z,1516721372.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:32.420Z,1516721372.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:32.441Z,1516721372.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:32.828Z,1516721372.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:32.843Z,1516721372.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:33.222Z,1516721373.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:33.238Z,1516721373.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:33.618Z,1516721373.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:33.633Z,1516721373.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:34.017Z,1516721374.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:34.037Z,1516721374.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:34.418Z,1516721374.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:34.434Z,1516721374.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:34.816Z,1516721374.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:34.835Z,1516721374.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:35.222Z,1516721375.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:35.238Z,1516721375.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:35.623Z,1516721375.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:35.638Z,1516721375.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:36.027Z,1516721376.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:36.042Z,1516721376.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:36.425Z,1516721376.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:36.440Z,1516721376.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:36.815Z,1516721376.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:36.843Z,1516721376.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:37.216Z,1516721377.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:37.236Z,1516721377.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:37.613Z,1516721377.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:37.637Z,1516721377.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:38.018Z,1516721378.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:38.033Z,1516721378.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:38.427Z,1516721378.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:38.442Z,1516721378.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:38.827Z,1516721378.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:38.842Z,1516721378.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:39.227Z,1516721379.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:39.248Z,1516721379.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:39.620Z,1516721379.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:39.641Z,1516721379.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:40.012Z,1516721380.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:40.045Z,1516721380.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:40.422Z,1516721380.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:40.437Z,1516721380.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:40.820Z,1516721380.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:40.840Z,1516721380.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:41.226Z,1516721381.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:41.242Z,1516721381.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:41.634Z,1516721381.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:41.650Z,1516721381.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:42.028Z,1516721382.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:42.043Z,1516721382.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:42.409Z,1516721382.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:42.441Z,1516721382.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:42.808Z,1516721382.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:42.837Z,1516721382.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:43.208Z,1516721383.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:43.241Z,1516721383.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:43.609Z,1516721383.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:43.641Z,1516721383.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:44.008Z,1516721384.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:44.044Z,1516721384.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:44.428Z,1516721384.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:44.443Z,1516721384.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:44.830Z,1516721384.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:44.846Z,1516721384.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:45.225Z,1516721385.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:45.251Z,1516721385.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:45.608Z,1516721385.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:45.641Z,1516721385.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:46.007Z,1516721386.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:46.041Z,1516721386.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:46.409Z,1516721386.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:46.454Z,1516721386.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:46.808Z,1516721386.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:46.841Z,1516721386.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:47.227Z,1516721387.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:47.242Z,1516721387.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:47.630Z,1516721387.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:47.657Z,1516721387.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:48.026Z,1516721388.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:48.048Z,1516721388.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:48.408Z,1516721388.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:48.441Z,1516721388.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:48.808Z,1516721388.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:48.837Z,1516721388.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:49.209Z,1516721389.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:49.235Z,1516721389.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:49.609Z,1516721389.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:49.645Z,1516721389.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:50.011Z,1516721390.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:50.039Z,1516721390.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:50.428Z,1516721390.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:50.443Z,1516721390.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:50.829Z,1516721390.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:50.852Z,1516721390.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:51.222Z,1516721391.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:51.250Z,1516721391.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:51.613Z,1516721391.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:51.649Z,1516721391.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:52.008Z,1516721392.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:52.045Z,1516721392.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:52.413Z,1516721392.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:52.428Z,1516721392.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:52.812Z,1516721392.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:52.857Z,1516721392.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:53.219Z,1516721393.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:53.251Z,1516721393.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:53.631Z,1516721393.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:53.659Z,1516721393.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:54.028Z,1516721394.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:54.054Z,1516721394.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:54.420Z,1516721394.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:54.456Z,1516721394.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:54.813Z,1516721394.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:54.828Z,1516721394.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:57.921Z,1516721397.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:57.957Z,1516721397.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:58.060Z,1516721398.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:58.100Z,1516721398.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:58.411Z,1516721398.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:58.426Z,1516721398.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:58.823Z,1516721398.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:58.856Z,1516721398.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:59.211Z,1516721399.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:59.226Z,1516721399.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:29:59.608Z,1516721399.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:29:59.631Z,1516721399.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:00.008Z,1516721400.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:00.029Z,1516721400.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:00.405Z,1516721400.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:00.428Z,1516721400.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:00.803Z,1516721400.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:00.835Z,1516721400.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:01.220Z,1516721401.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:01.235Z,1516721401.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:01.622Z,1516721401.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:01.638Z,1516721401.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:02.018Z,1516721402.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:02.034Z,1516721402.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:02.409Z,1516721402.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:02.429Z,1516721402.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:02.804Z,1516721402.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:02.826Z,1516721402.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:03.204Z,1516721403.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:03.226Z,1516721403.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:03.605Z,1516721403.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:03.637Z,1516721403.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:04.012Z,1516721404.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:04.031Z,1516721404.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:04.416Z,1516721404.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:04.443Z,1516721404.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:04.824Z,1516721404.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:04.839Z,1516721404.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:05.216Z,1516721405.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:05.255Z,1516721405.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:05.600Z,1516721405.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:05.633Z,1516721405.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:06.001Z,1516721406.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:06.028Z,1516721406.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:06.401Z,1516721406.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:06.432Z,1516721406.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:06.807Z,1516721406.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:06.841Z,1516721406.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:07.215Z,1516721407.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:07.253Z,1516721407.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:07.615Z,1516721407.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:07.653Z,1516721407.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:08.034Z,1516721408.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:08.049Z,1516721408.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:08.405Z,1516721408.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:08.421Z,1516721408.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:08.809Z,1516721408.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:08.849Z,1516721408.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:09.209Z,1516721409.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:09.229Z,1516721409.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:09.610Z,1516721409.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:09.626Z,1516721409.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:10.006Z,1516721410.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:10.029Z,1516721410.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:10.424Z,1516721410.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:10.455Z,1516721410.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:10.816Z,1516721410.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:10.853Z,1516721410.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:11.224Z,1516721411.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:11.259Z,1516721411.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:11.613Z,1516721411.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:11.629Z,1516721411.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:12.010Z,1516721412.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:12.025Z,1516721412.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:12.404Z,1516721412.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:12.436Z,1516721412.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:12.804Z,1516721412.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:12.827Z,1516721412.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:13.220Z,1516721413.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:13.236Z,1516721413.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:13.623Z,1516721413.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:13.639Z,1516721413.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:14.019Z,1516721414.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:14.035Z,1516721414.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:14.411Z,1516721414.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:14.426Z,1516721414.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:14.808Z,1516721414.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:14.828Z,1516721414.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:15.203Z,1516721415.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:15.237Z,1516721415.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:15.611Z,1516721415.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:15.626Z,1516721415.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:16.004Z,1516721416.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:16.035Z,1516721416.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:16.424Z,1516721416.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:16.440Z,1516721416.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:16.821Z,1516721416.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:16.848Z,1516721416.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:17.220Z,1516721417.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:17.236Z,1516721417.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:17.599Z,1516721417.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:17.637Z,1516721417.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:18.004Z,1516721418.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:18.033Z,1516721418.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:18.405Z,1516721418.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:18.432Z,1516721418.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:18.799Z,1516721418.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:18.833Z,1516721418.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:19.225Z,1516721419.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:19.241Z,1516721419.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:19.627Z,1516721419.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:19.650Z,1516721419.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:20.011Z,1516721420.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:20.046Z,1516721420.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:20.401Z,1516721420.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:20.432Z,1516721420.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:20.805Z,1516721420.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:20.841Z,1516721420.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:21.211Z,1516721421.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:21.237Z,1516721421.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:21.615Z,1516721421.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:21.654Z,1516721421.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:22.015Z,1516721422.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:22.049Z,1516721422.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:22.405Z,1516721422.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:22.440Z,1516721422.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:22.804Z,1516721422.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:22.819Z,1516721422.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:23.211Z,1516721423.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:23.247Z,1516721423.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:23.623Z,1516721423.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:23.687Z,1516721423.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:24.015Z,1516721424.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:24.050Z,1516721424.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:24.405Z,1516721424.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:24.425Z,1516721424.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:24.806Z,1516721424.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:24.825Z,1516721424.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:25.214Z,1516721425.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:25.229Z,1516721425.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:25.623Z,1516721425.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:25.654Z,1516721425.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:26.015Z,1516721426.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:26.030Z,1516721426.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:26.409Z,1516721426.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:26.424Z,1516721426.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:26.806Z,1516721426.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:26.834Z,1516721426.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:27.218Z,1516721427.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:27.237Z,1516721427.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:27.618Z,1516721427.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:27.633Z,1516721427.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:28.018Z,1516721428.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:28.041Z,1516721428.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:28.408Z,1516721428.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:28.427Z,1516721428.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:28.809Z,1516721428.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:28.824Z,1516721428.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:29.220Z,1516721429.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:29.235Z,1516721429.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:29.617Z,1516721429.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:29.637Z,1516721429.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:30.020Z,1516721430.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:30.035Z,1516721430.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:30.408Z,1516721430.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:30.428Z,1516721430.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:30.803Z,1516721430.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:30.836Z,1516721430.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:31.223Z,1516721431.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:31.238Z,1516721431.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:31.622Z,1516721431.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:31.637Z,1516721431.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:32.019Z,1516721432.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:32.033Z,1516721432.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:32.409Z,1516721432.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:32.428Z,1516721432.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:32.812Z,1516721432.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:32.827Z,1516721432.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:33.218Z,1516721433.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:33.234Z,1516721433.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:33.622Z,1516721433.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:33.641Z,1516721433.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:34.022Z,1516721434.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:34.037Z,1516721434.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:34.408Z,1516721434.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:34.427Z,1516721434.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:34.809Z,1516721434.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:34.828Z,1516721434.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:35.222Z,1516721435.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:35.237Z,1516721435.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:35.622Z,1516721435.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:35.645Z,1516721435.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:36.024Z,1516721436.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:36.039Z,1516721436.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:36.413Z,1516721436.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:36.428Z,1516721436.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:36.800Z,1516721436.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:36.832Z,1516721436.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:37.220Z,1516721437.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:37.234Z,1516721437.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:37.623Z,1516721437.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:37.638Z,1516721437.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:38.016Z,1516721438.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:38.043Z,1516721438.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:38.405Z,1516721438.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:38.432Z,1516721438.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:38.800Z,1516721438.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:38.826Z,1516721438.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:39.227Z,1516721439.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:39.242Z,1516721439.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:39.623Z,1516721439.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:39.641Z,1516721439.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:40.020Z,1516721440.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:40.034Z,1516721440.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:40.401Z,1516721440.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:40.437Z,1516721440.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:40.804Z,1516721440.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:40.832Z,1516721440.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:41.223Z,1516721441.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:41.239Z,1516721441.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:41.622Z,1516721441.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:41.646Z,1516721441.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:42.010Z,1516721442.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:42.054Z,1516721442.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:42.405Z,1516721442.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:42.432Z,1516721442.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:42.800Z,1516721442.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:42.833Z,1516721442.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:43.225Z,1516721443.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:43.240Z,1516721443.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:43.627Z,1516721443.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:43.643Z,1516721443.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:44.011Z,1516721444.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:44.045Z,1516721444.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:44.401Z,1516721444.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:44.439Z,1516721444.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:44.441Z,1516721444.441 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:44.441Z,1516721444.441 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 244 2018-01-23T15:30:44.442Z,1516721444.442 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:30:44.453Z,1516721444.453 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:30:44.800Z,1516721444.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:44.837Z,1516721444.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:44.850Z,1516721444.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:30:44.850Z,1516721444.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 244 2018-01-23T15:30:45.211Z,1516721445.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:45.247Z,1516721445.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:45.248Z,1516721445.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:30:45.249Z,1516721445.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:30:45.249Z,1516721445.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:30:45.626Z,1516721445.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:45.641Z,1516721445.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:46.011Z,1516721446.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:46.049Z,1516721446.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:46.406Z,1516721446.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:46.437Z,1516721446.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:46.801Z,1516721446.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:46.816Z,1516721446.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:47.219Z,1516721447.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:47.246Z,1516721447.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:47.636Z,1516721447.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:47.669Z,1516721447.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:48.020Z,1516721448.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:48.052Z,1516721448.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:48.406Z,1516721448.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:48.421Z,1516721448.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:48.806Z,1516721448.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:48.822Z,1516721448.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:49.215Z,1516721449.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:49.251Z,1516721449.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:49.612Z,1516721449.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:49.628Z,1516721449.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:50.016Z,1516721450.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:50.032Z,1516721450.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:50.410Z,1516721450.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:50.425Z,1516721450.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:50.804Z,1516721450.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:50.831Z,1516721450.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:51.214Z,1516721451.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:51.237Z,1516721451.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:51.619Z,1516721451.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:51.634Z,1516721451.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:52.014Z,1516721452.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:52.037Z,1516721452.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:52.409Z,1516721452.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:52.429Z,1516721452.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:52.810Z,1516721452.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:52.825Z,1516721452.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:53.217Z,1516721453.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:53.241Z,1516721453.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:53.623Z,1516721453.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:53.638Z,1516721453.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:54.021Z,1516721454.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:54.036Z,1516721454.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:54.401Z,1516721454.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:54.437Z,1516721454.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:54.805Z,1516721454.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:54.833Z,1516721454.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:55.201Z,1516721455.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:55.235Z,1516721455.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:58.320Z,1516721458.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:58.336Z,1516721458.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:58.336Z,1516721458.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 244 2018-01-23T15:30:58.336Z,1516721458.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:30:58.338Z,1516721458.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:58.338Z,1516721458.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 244 2018-01-23T15:30:58.338Z,1516721458.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:30:58.355Z,1516721458.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:30:58.355Z,1516721458.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:30:58.463Z,1516721458.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:58.514Z,1516721458.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:30:58.514Z,1516721458.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 244 2018-01-23T15:30:58.519Z,1516721458.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:30:58.519Z,1516721458.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 244 2018-01-23T15:30:58.798Z,1516721458.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:58.816Z,1516721458.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:30:58.816Z,1516721458.816 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:30:58.816Z,1516721458.816 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:30:58.817Z,1516721458.817 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:30:58.817Z,1516721458.817 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:30:58.817Z,1516721458.817 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:30:59.202Z,1516721459.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:59.216Z,1516721459.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T15:30:59.217Z,1516721459.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:59.598Z,1516721459.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:30:59.613Z,1516721459.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T15:30:59.614Z,1516721459.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:30:59.988Z,1516721459.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:00.017Z,1516721460.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T15:31:00.018Z,1516721460.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:00.398Z,1516721460.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:00.413Z,1516721460.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T15:31:00.414Z,1516721460.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:00.803Z,1516721460.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:00.818Z,1516721460.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T15:31:00.819Z,1516721460.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:01.203Z,1516721461.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:01.218Z,1516721461.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T15:31:01.219Z,1516721461.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:01.593Z,1516721461.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:01.608Z,1516721461.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T15:31:01.609Z,1516721461.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:01.988Z,1516721461.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:02.010Z,1516721462.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T15:31:02.011Z,1516721462.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:02.390Z,1516721462.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:02.417Z,1516721462.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T15:31:02.418Z,1516721462.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:02.802Z,1516721462.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:02.816Z,1516721462.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T15:31:02.817Z,1516721462.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:03.196Z,1516721463.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:03.216Z,1516721463.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T15:31:03.217Z,1516721463.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:03.606Z,1516721463.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:03.621Z,1516721463.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T15:31:03.622Z,1516721463.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:04.006Z,1516721464.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:04.020Z,1516721464.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T15:31:04.021Z,1516721464.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:04.406Z,1516721464.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:04.424Z,1516721464.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T15:31:04.425Z,1516721464.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:04.800Z,1516721464.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:04.820Z,1516721464.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T15:31:04.821Z,1516721464.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:05.197Z,1516721465.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:05.211Z,1516721465.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T15:31:05.212Z,1516721465.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:05.600Z,1516721465.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:05.614Z,1516721465.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T15:31:05.616Z,1516721465.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:06.001Z,1516721466.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:06.015Z,1516721466.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T15:31:06.016Z,1516721466.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:06.406Z,1516721466.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:06.421Z,1516721466.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T15:31:06.422Z,1516721466.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:06.806Z,1516721466.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:06.824Z,1516721466.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T15:31:06.825Z,1516721466.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:07.204Z,1516721467.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:07.218Z,1516721467.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T15:31:07.219Z,1516721467.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:07.598Z,1516721467.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:07.612Z,1516721467.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T15:31:07.613Z,1516721467.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:08.000Z,1516721468.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:08.020Z,1516721468.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T15:31:08.021Z,1516721468.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:08.397Z,1516721468.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:08.411Z,1516721468.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T15:31:08.412Z,1516721468.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:08.796Z,1516721468.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:08.810Z,1516721468.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T15:31:08.811Z,1516721468.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:09.193Z,1516721469.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:09.213Z,1516721469.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T15:31:09.214Z,1516721469.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:09.606Z,1516721469.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:09.628Z,1516721469.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T15:31:09.629Z,1516721469.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:10.006Z,1516721470.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:10.021Z,1516721470.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T15:31:10.022Z,1516721470.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:10.405Z,1516721470.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:10.420Z,1516721470.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T15:31:10.421Z,1516721470.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:10.790Z,1516721470.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:10.820Z,1516721470.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T15:31:10.821Z,1516721470.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:11.197Z,1516721471.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:11.211Z,1516721471.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T15:31:11.212Z,1516721471.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:11.589Z,1516721471.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:11.611Z,1516721471.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T15:31:11.612Z,1516721471.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:11.988Z,1516721471.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:12.024Z,1516721472.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T15:31:12.025Z,1516721472.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:12.410Z,1516721472.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:12.425Z,1516721472.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T15:31:12.426Z,1516721472.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:12.809Z,1516721472.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:12.828Z,1516721472.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T15:31:12.829Z,1516721472.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:13.219Z,1516721473.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:13.234Z,1516721473.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T15:31:13.235Z,1516721473.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:13.586Z,1516721473.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:13.625Z,1516721473.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T15:31:13.626Z,1516721473.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:13.991Z,1516721473.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:14.024Z,1516721474.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T15:31:14.025Z,1516721474.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:14.389Z,1516721474.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:14.416Z,1516721474.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T15:31:14.417Z,1516721474.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:14.789Z,1516721474.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:14.803Z,1516721474.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T15:31:14.804Z,1516721474.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:15.190Z,1516721475.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:15.206Z,1516721475.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T15:31:15.223Z,1516721475.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:15.607Z,1516721475.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:15.633Z,1516721475.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T15:31:15.634Z,1516721475.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:16.003Z,1516721476.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:16.030Z,1516721476.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T15:31:16.031Z,1516721476.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:16.403Z,1516721476.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:16.429Z,1516721476.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T15:31:16.430Z,1516721476.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:16.798Z,1516721476.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:16.829Z,1516721476.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T15:31:16.830Z,1516721476.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:17.190Z,1516721477.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:17.204Z,1516721477.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T15:31:17.205Z,1516721477.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:17.595Z,1516721477.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:17.610Z,1516721477.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T15:31:17.611Z,1516721477.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:17.993Z,1516721477.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:18.008Z,1516721478.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T15:31:18.009Z,1516721478.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:18.398Z,1516721478.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:18.413Z,1516721478.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:18.808Z,1516721478.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:18.855Z,1516721478.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:19.195Z,1516721479.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:19.223Z,1516721479.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:19.599Z,1516721479.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:19.614Z,1516721479.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:19.999Z,1516721479.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:20.015Z,1516721480.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:20.396Z,1516721480.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:20.410Z,1516721480.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:20.810Z,1516721480.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:20.863Z,1516721480.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:21.201Z,1516721481.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:21.225Z,1516721481.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:21.614Z,1516721481.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:21.634Z,1516721481.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:22.018Z,1516721482.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:22.042Z,1516721482.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:22.402Z,1516721482.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:22.451Z,1516721482.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:22.803Z,1516721482.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:22.852Z,1516721482.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:23.200Z,1516721483.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:23.268Z,1516721483.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:23.597Z,1516721483.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:23.621Z,1516721483.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:23.000Z,1516721484.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:24.043Z,1516721484.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:24.403Z,1516721484.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:24.418Z,1516721484.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:24.814Z,1516721484.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:24.849Z,1516721484.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:25.205Z,1516721485.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:25.225Z,1516721485.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:25.610Z,1516721485.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:25.690Z,1516721485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:26.002Z,1516721486.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:26.021Z,1516721486.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:26.401Z,1516721486.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:26.435Z,1516721486.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:26.816Z,1516721486.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:26.880Z,1516721486.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:27.189Z,1516721487.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:27.230Z,1516721487.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:27.611Z,1516721487.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:27.630Z,1516721487.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:28.018Z,1516721488.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:28.072Z,1516721488.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:28.414Z,1516721488.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:28.433Z,1516721488.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:28.793Z,1516721488.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:28.810Z,1516721488.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:29.211Z,1516721489.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:29.237Z,1516721489.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:29.600Z,1516721489.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:29.637Z,1516721489.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:30.007Z,1516721490.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:30.035Z,1516721490.035 [PNI_TCM](ERROR): CRC does not match. Expected:0x54993 got:0x45153 2018-01-23T15:31:30.065Z,1516721490.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:30.401Z,1516721490.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:30.491Z,1516721490.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:30.803Z,1516721490.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:30.818Z,1516721490.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:31.205Z,1516721491.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:31.253Z,1516721491.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:31.595Z,1516721491.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:31.606Z,1516721491.606 [PNI_TCM](ERROR): CRC does not match. Expected:0x56960 got:0x56348 2018-01-23T15:31:31.660Z,1516721491.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:31.996Z,1516721491.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:32.010Z,1516721492.010 [PNI_TCM](ERROR): CRC does not match. Expected:0x8046 got:0x15133 2018-01-23T15:31:32.053Z,1516721492.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:32.402Z,1516721492.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:32.429Z,1516721492.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:32.796Z,1516721492.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:32.825Z,1516721492.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:33.192Z,1516721493.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:33.229Z,1516721493.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:33.613Z,1516721493.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:33.637Z,1516721493.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:34.013Z,1516721494.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:34.041Z,1516721494.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:34.406Z,1516721494.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:34.438Z,1516721494.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:34.790Z,1516721494.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:34.829Z,1516721494.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:35.186Z,1516721495.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:35.227Z,1516721495.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:35.594Z,1516721495.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:35.630Z,1516721495.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:36.007Z,1516721496.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:36.041Z,1516721496.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:36.401Z,1516721496.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:36.441Z,1516721496.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:36.804Z,1516721496.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:36.847Z,1516721496.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:37.205Z,1516721497.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:37.251Z,1516721497.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:37.595Z,1516721497.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:37.644Z,1516721497.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:37.994Z,1516721497.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:38.041Z,1516721498.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:38.398Z,1516721498.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:38.425Z,1516721498.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:38.803Z,1516721498.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:38.850Z,1516721498.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:39.194Z,1516721499.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:39.268Z,1516721499.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:39.604Z,1516721499.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:39.630Z,1516721499.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:40.008Z,1516721500.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:40.024Z,1516721500.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:40.402Z,1516721500.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:40.432Z,1516721500.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:40.784Z,1516721500.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:40.826Z,1516721500.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:41.197Z,1516721501.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:41.212Z,1516721501.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:41.597Z,1516721501.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:41.617Z,1516721501.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:41.984Z,1516721501.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:42.026Z,1516721502.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:42.404Z,1516721502.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:42.419Z,1516721502.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:42.800Z,1516721502.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:42.829Z,1516721502.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:43.209Z,1516721503.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:43.252Z,1516721503.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:43.588Z,1516721503.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:43.620Z,1516721503.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:43.984Z,1516721503.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:44.017Z,1516721504.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:44.384Z,1516721504.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:44.417Z,1516721504.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:44.785Z,1516721504.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:44.822Z,1516721504.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:45.182Z,1516721505.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:45.211Z,1516721505.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:45.595Z,1516721505.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:45.631Z,1516721505.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:46.009Z,1516721506.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:46.026Z,1516721506.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:46.395Z,1516721506.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:46.433Z,1516721506.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:46.788Z,1516721506.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:46.828Z,1516721506.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:47.218Z,1516721507.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:47.234Z,1516721507.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:47.589Z,1516721507.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:47.621Z,1516721507.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:47.988Z,1516721507.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:48.029Z,1516721508.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:48.402Z,1516721508.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:48.427Z,1516721508.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:48.806Z,1516721508.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:48.852Z,1516721508.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:49.203Z,1516721509.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:49.218Z,1516721509.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:49.584Z,1516721509.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:49.613Z,1516721509.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:49.982Z,1516721509.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:50.027Z,1516721510.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:50.388Z,1516721510.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:50.425Z,1516721510.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:50.785Z,1516721510.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:50.830Z,1516721510.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:51.184Z,1516721511.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:51.222Z,1516721511.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:51.595Z,1516721511.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:51.626Z,1516721511.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:52.003Z,1516721512.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:52.029Z,1516721512.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:52.403Z,1516721512.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:52.429Z,1516721512.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:52.800Z,1516721512.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:52.843Z,1516721512.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:53.196Z,1516721513.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:53.238Z,1516721513.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:53.593Z,1516721513.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:53.609Z,1516721513.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:53.992Z,1516721513.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:54.013Z,1516721514.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:54.398Z,1516721514.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:54.413Z,1516721514.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:54.799Z,1516721514.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:54.814Z,1516721514.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:55.200Z,1516721515.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:55.214Z,1516721515.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:55.595Z,1516721515.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:55.610Z,1516721515.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:58.697Z,1516721518.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:58.713Z,1516721518.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:58.809Z,1516721518.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:58.854Z,1516721518.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:59.196Z,1516721519.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:59.211Z,1516721519.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:59.598Z,1516721519.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:31:59.613Z,1516721519.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:31:59.994Z,1516721519.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:00.009Z,1516721520.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:00.379Z,1516721520.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:00.412Z,1516721520.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:00.786Z,1516721520.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:00.802Z,1516721520.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:01.180Z,1516721521.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:01.204Z,1516721521.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:01.594Z,1516721521.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:01.613Z,1516721521.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:01.999Z,1516721521.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:02.021Z,1516721522.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:02.399Z,1516721522.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:02.414Z,1516721522.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:02.780Z,1516721522.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:02.805Z,1516721522.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:03.185Z,1516721523.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:03.204Z,1516721523.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:03.584Z,1516721523.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:03.611Z,1516721523.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:03.989Z,1516721523.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:04.005Z,1516721524.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:04.396Z,1516721524.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:04.411Z,1516721524.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:04.796Z,1516721524.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:04.823Z,1516721524.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:05.197Z,1516721525.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:05.212Z,1516721525.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:05.576Z,1516721525.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:05.611Z,1516721525.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:05.976Z,1516721525.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:06.005Z,1516721526.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:06.392Z,1516721526.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:06.412Z,1516721526.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:06.778Z,1516721526.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:06.813Z,1516721526.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:07.177Z,1516721527.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:07.204Z,1516721527.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:07.592Z,1516721527.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:07.623Z,1516721527.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:08.001Z,1516721528.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:08.016Z,1516721528.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:08.397Z,1516721528.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:08.417Z,1516721528.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:08.776Z,1516721528.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:08.803Z,1516721528.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:09.176Z,1516721529.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:09.221Z,1516721529.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:09.577Z,1516721529.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:09.609Z,1516721529.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:09.975Z,1516721529.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:10.021Z,1516721530.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:10.387Z,1516721530.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:10.424Z,1516721530.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:10.787Z,1516721530.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:10.814Z,1516721530.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:11.187Z,1516721531.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:11.240Z,1516721531.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:11.577Z,1516721531.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:11.592Z,1516721531.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:11.978Z,1516721531.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:11.993Z,1516721531.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:12.399Z,1516721532.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:12.421Z,1516721532.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:12.803Z,1516721532.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:12.829Z,1516721532.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:13.195Z,1516721533.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:13.228Z,1516721533.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:13.588Z,1516721533.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:13.629Z,1516721533.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:13.981Z,1516721533.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:13.996Z,1516721533.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:14.381Z,1516721534.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:14.400Z,1516721534.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:14.784Z,1516721534.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:14.799Z,1516721534.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:15.184Z,1516721535.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:15.199Z,1516721535.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:15.588Z,1516721535.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:15.603Z,1516721535.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:15.991Z,1516721535.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:16.006Z,1516721536.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:16.387Z,1516721536.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:16.408Z,1516721536.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:16.782Z,1516721536.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:16.797Z,1516721536.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:17.183Z,1516721537.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:17.198Z,1516721537.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:17.585Z,1516721537.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:17.604Z,1516721537.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:17.982Z,1516721537.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:17.997Z,1516721537.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:18.387Z,1516721538.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:18.403Z,1516721538.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:18.791Z,1516721538.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:18.812Z,1516721538.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:19.199Z,1516721539.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:19.214Z,1516721539.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:19.585Z,1516721539.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:19.600Z,1516721539.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:19.985Z,1516721539.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:19.000Z,1516721540.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:20.390Z,1516721540.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:20.409Z,1516721540.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:20.795Z,1516721540.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:20.810Z,1516721540.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:21.190Z,1516721541.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:21.205Z,1516721541.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:21.581Z,1516721541.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:21.603Z,1516721541.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:21.984Z,1516721541.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:21.999Z,1516721541.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:22.390Z,1516721542.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:22.412Z,1516721542.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:22.790Z,1516721542.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:22.809Z,1516721542.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:23.192Z,1516721543.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:23.206Z,1516721543.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:23.586Z,1516721543.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:23.601Z,1516721543.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:23.980Z,1516721543.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:23.000Z,1516721544.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:24.388Z,1516721544.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:24.418Z,1516721544.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:24.795Z,1516721544.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:24.810Z,1516721544.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:25.192Z,1516721545.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:25.207Z,1516721545.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:25.584Z,1516721545.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:25.602Z,1516721545.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:25.985Z,1516721545.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:25.000Z,1516721546.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:26.390Z,1516721546.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:26.409Z,1516721546.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:26.791Z,1516721546.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:26.806Z,1516721546.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:27.190Z,1516721547.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:27.205Z,1516721547.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:27.585Z,1516721547.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:27.600Z,1516721547.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:27.984Z,1516721547.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:27.999Z,1516721547.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:28.392Z,1516721548.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:28.417Z,1516721548.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:28.795Z,1516721548.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:28.814Z,1516721548.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:29.195Z,1516721549.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:29.210Z,1516721549.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:29.577Z,1516721549.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:29.612Z,1516721549.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:29.976Z,1516721549.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:30.009Z,1516721550.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:30.399Z,1516721550.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:30.414Z,1516721550.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:30.799Z,1516721550.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:30.814Z,1516721550.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:31.195Z,1516721551.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:31.210Z,1516721551.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:31.577Z,1516721551.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:31.603Z,1516721551.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:31.976Z,1516721551.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:32.012Z,1516721552.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:32.364Z,1516721552.364 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T15:32:32.364Z,1516721552.364 [NAL9602] Data Fault, FailCount= 2 2018-01-23T15:32:32.364Z,1516721552.364 [NAL9602](ERROR): Data Fault 2018-01-23T15:32:32.390Z,1516721552.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:32.417Z,1516721552.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:32.443Z,1516721552.443 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T15:32:32.768Z,1516721552.768 [NAL9602](INFO): Powering down 2018-01-23T15:32:32.800Z,1516721552.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:32.815Z,1516721552.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:33.176Z,1516721553.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:33.203Z,1516721553.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:33.574Z,1516721553.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:33.597Z,1516721553.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:33.618Z,1516721553.618 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T15:32:33.618Z,1516721553.618 [NAL9602] No Fault, FailCount= 2 2018-01-23T15:32:33.979Z,1516721553.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:34.005Z,1516721554.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:34.376Z,1516721554.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:34.408Z,1516721554.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:34.773Z,1516721554.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:34.808Z,1516721554.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:35.176Z,1516721555.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:35.208Z,1516721555.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:35.576Z,1516721555.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:35.613Z,1516721555.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:35.976Z,1516721555.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:35.999Z,1516721555.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:36.376Z,1516721556.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:36.413Z,1516721556.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:36.776Z,1516721556.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:36.814Z,1516721556.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:37.180Z,1516721557.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:37.215Z,1516721557.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:37.577Z,1516721557.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:37.613Z,1516721557.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:37.977Z,1516721557.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:37.991Z,1516721557.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:38.385Z,1516721558.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:38.400Z,1516721558.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:38.782Z,1516721558.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:38.797Z,1516721558.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:39.181Z,1516721559.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:39.196Z,1516721559.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:39.581Z,1516721559.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:39.597Z,1516721559.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:39.981Z,1516721559.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:40.009Z,1516721560.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:40.385Z,1516721560.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:40.400Z,1516721560.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:40.782Z,1516721560.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:40.798Z,1516721560.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:41.183Z,1516721561.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:41.201Z,1516721561.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:41.583Z,1516721561.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:41.598Z,1516721561.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:41.982Z,1516721561.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:41.998Z,1516721561.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:42.389Z,1516721562.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:42.404Z,1516721562.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:42.783Z,1516721562.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:42.799Z,1516721562.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:43.183Z,1516721563.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:43.198Z,1516721563.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:43.580Z,1516721563.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:43.608Z,1516721563.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:43.985Z,1516721563.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:44.000Z,1516721564.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:44.383Z,1516721564.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:44.398Z,1516721564.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:44.783Z,1516721564.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:44.798Z,1516721564.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:45.183Z,1516721565.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:45.198Z,1516721565.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:45.584Z,1516721565.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:45.599Z,1516721565.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:45.980Z,1516721565.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:46.008Z,1516721566.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:46.383Z,1516721566.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:46.404Z,1516721566.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:46.782Z,1516721566.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:46.797Z,1516721566.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:47.184Z,1516721567.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:47.204Z,1516721567.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:47.585Z,1516721567.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:47.600Z,1516721567.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:47.981Z,1516721567.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:47.997Z,1516721567.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:48.383Z,1516721568.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:48.398Z,1516721568.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:48.783Z,1516721568.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:48.798Z,1516721568.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:49.183Z,1516721569.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:49.198Z,1516721569.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:49.583Z,1516721569.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:49.597Z,1516721569.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:49.983Z,1516721569.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:49.998Z,1516721569.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:50.383Z,1516721570.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:50.398Z,1516721570.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:50.778Z,1516721570.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:50.812Z,1516721570.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:51.183Z,1516721571.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:51.198Z,1516721571.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:51.581Z,1516721571.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:51.596Z,1516721571.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:51.983Z,1516721571.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:52.004Z,1516721572.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:52.385Z,1516721572.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:52.399Z,1516721572.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:52.781Z,1516721572.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:52.796Z,1516721572.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:53.183Z,1516721573.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:53.198Z,1516721573.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:53.583Z,1516721573.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:53.598Z,1516721573.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:53.981Z,1516721573.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:53.996Z,1516721573.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:54.383Z,1516721574.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:54.397Z,1516721574.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:54.783Z,1516721574.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:54.797Z,1516721574.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:55.183Z,1516721575.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:55.198Z,1516721575.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:55.584Z,1516721575.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:55.598Z,1516721575.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:55.985Z,1516721575.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:56.000Z,1516721576.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:59.081Z,1516721579.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:59.096Z,1516721579.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:59.201Z,1516721579.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:59.240Z,1516721579.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:59.552Z,1516721579.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:59.588Z,1516721579.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:32:59.952Z,1516721579.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:32:59.992Z,1516721579.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:00.346Z,1516721580.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:00.361Z,1516721580.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:00.745Z,1516721580.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:00.765Z,1516721580.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:01.147Z,1516721581.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:01.161Z,1516721581.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:01.544Z,1516721581.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:01.559Z,1516721581.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:01.949Z,1516721581.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:01.965Z,1516721581.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:02.345Z,1516721582.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:02.371Z,1516721582.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:02.744Z,1516721582.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:02.759Z,1516721582.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:03.128Z,1516721583.128 [NAL9602](INFO): Powering up NAL9602 2018-01-23T15:33:03.146Z,1516721583.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:03.173Z,1516721583.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:03.549Z,1516721583.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:03.563Z,1516721583.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:03.949Z,1516721583.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:03.964Z,1516721583.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:04.346Z,1516721584.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:04.370Z,1516721584.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:04.747Z,1516721584.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:04.763Z,1516721584.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:05.148Z,1516721585.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:05.163Z,1516721585.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:05.546Z,1516721585.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:05.565Z,1516721585.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:05.948Z,1516721585.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:05.963Z,1516721585.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:06.344Z,1516721586.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:06.367Z,1516721586.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:06.744Z,1516721586.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:06.767Z,1516721586.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:07.149Z,1516721587.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:07.168Z,1516721587.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:07.538Z,1516721587.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:07.564Z,1516721587.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:07.957Z,1516721587.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:07.977Z,1516721587.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:08.348Z,1516721588.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:08.363Z,1516721588.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:08.748Z,1516721588.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:08.767Z,1516721588.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:09.143Z,1516721589.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:09.175Z,1516721589.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:09.548Z,1516721589.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:09.563Z,1516721589.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:09.949Z,1516721589.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:09.964Z,1516721589.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:10.343Z,1516721590.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:10.376Z,1516721590.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:10.749Z,1516721590.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:10.764Z,1516721590.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:11.150Z,1516721591.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:11.165Z,1516721591.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:11.543Z,1516721591.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:11.566Z,1516721591.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:11.949Z,1516721591.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:11.968Z,1516721591.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:12.357Z,1516721592.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:12.372Z,1516721592.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:12.753Z,1516721592.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:12.768Z,1516721592.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:13.156Z,1516721593.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:13.171Z,1516721593.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:13.560Z,1516721593.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:13.581Z,1516721593.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:13.924Z,1516721593.924 [NAL9602](INFO): NAL9602 initialized 2018-01-23T15:33:13.950Z,1516721593.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:13.977Z,1516721593.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:14.354Z,1516721594.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:14.369Z,1516721594.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:14.760Z,1516721594.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:14.781Z,1516721594.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:15.165Z,1516721595.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:15.180Z,1516721595.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:15.561Z,1516721595.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:15.580Z,1516721595.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:15.941Z,1516721595.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:15.971Z,1516721595.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:16.341Z,1516721596.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:16.369Z,1516721596.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:16.740Z,1516721596.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:16.777Z,1516721596.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:17.160Z,1516721597.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:17.181Z,1516721597.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:17.563Z,1516721597.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:17.585Z,1516721597.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:17.959Z,1516721597.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:17.977Z,1516721597.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:18.354Z,1516721598.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:18.369Z,1516721598.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:18.742Z,1516721598.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:18.770Z,1516721598.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:19.141Z,1516721599.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:19.168Z,1516721599.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:19.538Z,1516721599.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:19.569Z,1516721599.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:19.964Z,1516721599.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:19.979Z,1516721599.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:20.363Z,1516721600.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:20.385Z,1516721600.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:20.760Z,1516721600.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:20.775Z,1516721600.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:21.145Z,1516721601.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:21.177Z,1516721601.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:21.557Z,1516721601.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:21.571Z,1516721601.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:21.941Z,1516721601.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:21.977Z,1516721601.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:22.343Z,1516721602.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:22.370Z,1516721602.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:22.741Z,1516721602.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:22.756Z,1516721602.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:23.152Z,1516721603.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:23.183Z,1516721603.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:23.560Z,1516721603.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:23.586Z,1516721603.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:23.956Z,1516721603.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:23.989Z,1516721603.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:24.349Z,1516721604.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:24.365Z,1516721604.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:24.745Z,1516721604.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:24.761Z,1516721604.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:25.146Z,1516721605.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:25.179Z,1516721605.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:25.544Z,1516721605.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:25.564Z,1516721605.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:25.955Z,1516721605.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:25.971Z,1516721605.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:26.363Z,1516721606.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:26.378Z,1516721606.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:26.751Z,1516721606.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:26.766Z,1516721606.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:27.146Z,1516721607.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:27.169Z,1516721607.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:27.549Z,1516721607.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:27.564Z,1516721607.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:27.948Z,1516721607.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:27.964Z,1516721607.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:28.346Z,1516721608.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:28.365Z,1516721608.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:28.746Z,1516721608.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:28.766Z,1516721608.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:29.154Z,1516721609.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:29.170Z,1516721609.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:29.555Z,1516721609.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:29.570Z,1516721609.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:29.954Z,1516721609.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:29.972Z,1516721609.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:30.347Z,1516721610.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:30.362Z,1516721610.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:30.748Z,1516721610.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:30.766Z,1516721610.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:31.149Z,1516721611.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:31.164Z,1516721611.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:31.546Z,1516721611.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:31.562Z,1516721611.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:31.954Z,1516721611.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:31.969Z,1516721611.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:32.356Z,1516721612.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:32.376Z,1516721612.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:32.754Z,1516721612.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:32.770Z,1516721612.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:33.148Z,1516721613.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:33.163Z,1516721613.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:33.546Z,1516721613.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:33.571Z,1516721613.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:33.949Z,1516721613.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:33.965Z,1516721613.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:34.348Z,1516721614.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:34.367Z,1516721614.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:34.748Z,1516721614.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:34.763Z,1516721614.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:35.155Z,1516721615.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:35.170Z,1516721615.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:35.555Z,1516721615.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:35.570Z,1516721615.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:35.954Z,1516721615.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:35.972Z,1516721615.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:36.347Z,1516721616.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:36.362Z,1516721616.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:36.748Z,1516721616.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:36.763Z,1516721616.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:37.155Z,1516721617.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:37.170Z,1516721617.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:37.547Z,1516721617.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:37.562Z,1516721617.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:37.954Z,1516721617.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:37.969Z,1516721617.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:38.360Z,1516721618.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:38.374Z,1516721618.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:38.754Z,1516721618.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:38.770Z,1516721618.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:39.148Z,1516721619.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:39.163Z,1516721619.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:39.548Z,1516721619.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:39.564Z,1516721619.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:39.949Z,1516721619.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:39.964Z,1516721619.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:40.348Z,1516721620.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:40.367Z,1516721620.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:40.748Z,1516721620.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:40.763Z,1516721620.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:41.154Z,1516721621.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:41.170Z,1516721621.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:41.555Z,1516721621.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:41.570Z,1516721621.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:41.954Z,1516721621.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:41.969Z,1516721621.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:42.350Z,1516721622.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:42.365Z,1516721622.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:42.752Z,1516721622.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:42.773Z,1516721622.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:43.149Z,1516721623.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:43.164Z,1516721623.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:43.545Z,1516721623.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:43.565Z,1516721623.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:43.954Z,1516721623.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:43.973Z,1516721623.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:44.359Z,1516721624.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:44.375Z,1516721624.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:44.755Z,1516721624.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:44.770Z,1516721624.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:45.148Z,1516721625.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:45.163Z,1516721625.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:45.544Z,1516721625.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:45.577Z,1516721625.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:45.583Z,1516721625.583 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:45.583Z,1516721625.583 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 245 2018-01-23T15:33:45.583Z,1516721625.583 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:33:45.608Z,1516721625.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:33:45.949Z,1516721625.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:45.964Z,1516721625.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:45.977Z,1516721625.977 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:33:45.977Z,1516721625.977 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 245 2018-01-23T15:33:46.344Z,1516721626.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:46.371Z,1516721626.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:46.372Z,1516721626.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:33:46.373Z,1516721626.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:33:46.373Z,1516721626.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:33:46.757Z,1516721626.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:46.777Z,1516721626.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:47.163Z,1516721627.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:47.178Z,1516721627.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:47.560Z,1516721627.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:47.583Z,1516721627.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:47.960Z,1516721627.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:47.975Z,1516721627.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:48.341Z,1516721628.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:48.368Z,1516721628.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:48.740Z,1516721628.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:48.773Z,1516721628.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:49.141Z,1516721629.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:49.173Z,1516721629.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:49.544Z,1516721629.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:49.576Z,1516721629.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:49.952Z,1516721629.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:49.977Z,1516721629.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:50.355Z,1516721630.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:50.393Z,1516721630.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:50.750Z,1516721630.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:50.786Z,1516721630.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:51.148Z,1516721631.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:51.185Z,1516721631.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:51.548Z,1516721631.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:51.569Z,1516721631.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:51.949Z,1516721631.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:51.964Z,1516721631.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:52.356Z,1516721632.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:52.393Z,1516721632.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:52.750Z,1516721632.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:52.766Z,1516721632.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:53.155Z,1516721633.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:53.171Z,1516721633.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:53.556Z,1516721633.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:53.570Z,1516721633.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:53.952Z,1516721633.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:53.973Z,1516721633.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:54.351Z,1516721634.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:54.366Z,1516721634.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:54.748Z,1516721634.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:54.781Z,1516721634.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:54.788Z,1516721634.788 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:28:54.5Z 2018-01-23T15:33:54.788Z,1516721634.788 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:33:54.788Z,1516721634.788 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:33:55.153Z,1516721635.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:55.169Z,1516721635.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:55.668Z,1516721635.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:55.683Z,1516721635.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:55.961Z,1516721635.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:55.985Z,1516721635.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:59.060Z,1516721639.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:59.075Z,1516721639.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:59.075Z,1516721639.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 245 2018-01-23T15:33:59.076Z,1516721639.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:33:59.077Z,1516721639.077 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:33:59.077Z,1516721639.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 245 2018-01-23T15:33:59.077Z,1516721639.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:33:59.090Z,1516721639.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:33:59.090Z,1516721639.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:33:59.176Z,1516721639.176 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0288.lzma 2018-01-23T15:33:59.219Z,1516721639.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:59.271Z,1516721639.271 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:33:59.271Z,1516721639.271 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 245 2018-01-23T15:33:59.272Z,1516721639.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:33:59.272Z,1516721639.272 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 245 2018-01-23T15:33:59.556Z,1516721639.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:59.576Z,1516721639.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:33:59.576Z,1516721639.576 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:33:59.577Z,1516721639.577 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:33:59.577Z,1516721639.577 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:33:59.577Z,1516721639.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:33:59.578Z,1516721639.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:33:59.922Z,1516721639.922 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0288.lzma.bak 2018-01-23T15:33:59.922Z,1516721639.922 [DataOverHttps](INFO): SBD MOMSN=7755793 2018-01-23T15:33:59.966Z,1516721639.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:33:59.981Z,1516721639.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T15:33:59.982Z,1516721639.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:00.592Z,1516721640.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:00.615Z,1516721640.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s. 2018-01-23T15:34:00.616Z,1516721640.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:00.742Z,1516721640.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:00.776Z,1516721640.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T15:34:00.777Z,1516721640.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:03.939Z,1516721643.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:03.972Z,1516721643.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T15:34:03.973Z,1516721643.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:04.074Z,1516721644.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:04.116Z,1516721644.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s. 2018-01-23T15:34:04.117Z,1516721644.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:04.431Z,1516721644.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:04.446Z,1516721644.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s. 2018-01-23T15:34:04.448Z,1516721644.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:04.830Z,1516721644.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:04.845Z,1516721644.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s. 2018-01-23T15:34:04.846Z,1516721644.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:05.221Z,1516721645.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:05.243Z,1516721645.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s. 2018-01-23T15:34:05.244Z,1516721645.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:05.621Z,1516721645.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:05.645Z,1516721645.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s. 2018-01-23T15:34:05.646Z,1516721645.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:08.773Z,1516721648.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:08.788Z,1516721648.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T15:34:08.789Z,1516721648.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:08.865Z,1516721648.865 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0289.lzma 2018-01-23T15:34:08.900Z,1516721648.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:08.936Z,1516721648.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T15:34:08.937Z,1516721648.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:09.256Z,1516721649.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:09.281Z,1516721649.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s. 2018-01-23T15:34:09.282Z,1516721649.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:09.621Z,1516721649.621 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0289.lzma.bak 2018-01-23T15:34:09.621Z,1516721649.621 [DataOverHttps](INFO): SBD MOMSN=7755795 2018-01-23T15:34:09.650Z,1516721649.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:09.688Z,1516721649.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s. 2018-01-23T15:34:09.689Z,1516721649.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:10.290Z,1516721650.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:10.305Z,1516721650.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:34:10.306Z,1516721650.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:10.309Z,1516721650.309 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:34:10.309Z,1516721650.309 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:34:10.309Z,1516721650.309 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:34:10.438Z,1516721650.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:10.472Z,1516721650.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s. 2018-01-23T15:34:10.473Z,1516721650.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:13.551Z,1516721653.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:13.582Z,1516721653.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T15:34:13.583Z,1516721653.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:13.700Z,1516721653.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:13.737Z,1516721653.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T15:34:13.738Z,1516721653.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:14.037Z,1516721654.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:14.056Z,1516721654.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s. 2018-01-23T15:34:14.057Z,1516721654.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:14.437Z,1516721654.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:14.452Z,1516721654.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s. 2018-01-23T15:34:14.453Z,1516721654.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:14.832Z,1516721654.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:14.847Z,1516721654.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s. 2018-01-23T15:34:14.848Z,1516721654.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:15.229Z,1516721655.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:15.250Z,1516721655.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s. 2018-01-23T15:34:15.251Z,1516721655.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:15.631Z,1516721655.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:15.656Z,1516721655.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s. 2018-01-23T15:34:15.657Z,1516721655.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:16.038Z,1516721656.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:16.056Z,1516721656.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s. 2018-01-23T15:34:16.057Z,1516721656.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:16.439Z,1516721656.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:16.454Z,1516721656.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s. 2018-01-23T15:34:16.455Z,1516721656.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:16.844Z,1516721656.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:16.858Z,1516721656.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s. 2018-01-23T15:34:16.859Z,1516721656.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:17.228Z,1516721657.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:17.250Z,1516721657.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s. 2018-01-23T15:34:17.251Z,1516721657.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:17.631Z,1516721657.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:17.646Z,1516721657.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s. 2018-01-23T15:34:17.647Z,1516721657.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:18.033Z,1516721658.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:18.052Z,1516721658.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s. 2018-01-23T15:34:18.053Z,1516721658.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:18.437Z,1516721658.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:18.452Z,1516721658.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T15:34:18.453Z,1516721658.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:18.827Z,1516721658.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:18.859Z,1516721658.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s. 2018-01-23T15:34:18.860Z,1516721658.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:19.246Z,1516721659.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:19.261Z,1516721659.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:19.645Z,1516721659.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:19.665Z,1516721659.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:20.042Z,1516721660.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:20.057Z,1516721660.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:20.431Z,1516721660.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:20.457Z,1516721660.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:20.836Z,1516721660.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:20.857Z,1516721660.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:21.229Z,1516721661.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:21.251Z,1516721661.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:21.633Z,1516721661.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:21.652Z,1516721661.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:22.043Z,1516721662.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:22.058Z,1516721662.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:22.444Z,1516721662.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:22.465Z,1516721662.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:22.847Z,1516721662.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:22.869Z,1516721662.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:23.246Z,1516721663.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:23.322Z,1516721663.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:23.636Z,1516721663.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:23.657Z,1516721663.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:24.028Z,1516721664.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:24.043Z,1516721664.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:24.429Z,1516721664.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:24.445Z,1516721664.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:24.826Z,1516721664.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:24.841Z,1516721664.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:25.239Z,1516721665.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:25.254Z,1516721665.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:25.640Z,1516721665.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:25.655Z,1516721665.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:26.043Z,1516721666.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:26.058Z,1516721666.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:26.426Z,1516721666.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:26.441Z,1516721666.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:26.826Z,1516721666.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:26.841Z,1516721666.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:27.229Z,1516721667.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:27.249Z,1516721667.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:27.626Z,1516721667.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:27.641Z,1516721667.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:28.040Z,1516721668.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:28.065Z,1516721668.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:28.450Z,1516721668.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:28.465Z,1516721668.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:28.834Z,1516721668.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:28.860Z,1516721668.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:29.232Z,1516721669.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:29.259Z,1516721669.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:29.625Z,1516721669.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:29.657Z,1516721669.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:30.028Z,1516721670.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:30.062Z,1516721670.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:30.429Z,1516721670.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:30.460Z,1516721670.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:30.823Z,1516721670.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:30.861Z,1516721670.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:31.235Z,1516721671.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:31.270Z,1516721671.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:31.651Z,1516721671.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:31.673Z,1516721671.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:32.035Z,1516721672.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:32.069Z,1516721672.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:32.428Z,1516721672.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:32.470Z,1516721672.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:32.828Z,1516721672.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:32.864Z,1516721672.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:32.878Z,1516721672.878 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:34:33.225Z,1516721673.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:33.240Z,1516721673.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:33.624Z,1516721673.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:33.645Z,1516721673.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:34.039Z,1516721674.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:34.065Z,1516721674.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:34.439Z,1516721674.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:34.465Z,1516721674.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:34.834Z,1516721674.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:34.861Z,1516721674.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:35.236Z,1516721675.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:35.271Z,1516721675.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:35.636Z,1516721675.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:35.671Z,1516721675.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:36.031Z,1516721676.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:36.046Z,1516721676.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:36.431Z,1516721676.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:36.446Z,1516721676.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:36.830Z,1516721676.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:36.845Z,1516721676.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:37.243Z,1516721677.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:37.277Z,1516721677.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:37.644Z,1516721677.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:37.675Z,1516721677.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:38.047Z,1516721678.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:38.072Z,1516721678.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:38.435Z,1516721678.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:38.450Z,1516721678.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:38.826Z,1516721678.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:38.842Z,1516721678.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:39.237Z,1516721679.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:39.252Z,1516721679.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:39.636Z,1516721679.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:39.685Z,1516721679.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:40.036Z,1516721680.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:40.051Z,1516721680.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:40.443Z,1516721680.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:40.458Z,1516721680.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:40.836Z,1516721680.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:40.851Z,1516721680.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:41.233Z,1516721681.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:41.248Z,1516721681.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:41.631Z,1516721681.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:41.661Z,1516721681.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:42.037Z,1516721682.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:42.053Z,1516721682.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:42.429Z,1516721682.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:42.450Z,1516721682.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:42.832Z,1516721682.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:42.853Z,1516721682.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:43.243Z,1516721683.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:43.259Z,1516721683.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:43.640Z,1516721683.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:43.669Z,1516721683.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:44.046Z,1516721684.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:44.063Z,1516721684.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:44.435Z,1516721684.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:44.449Z,1516721684.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:44.822Z,1516721684.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:44.850Z,1516721684.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:45.242Z,1516721685.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:45.257Z,1516721685.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:45.625Z,1516721685.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:45.670Z,1516721685.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:46.035Z,1516721686.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:46.070Z,1516721686.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:46.443Z,1516721686.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:46.466Z,1516721686.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:46.836Z,1516721686.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:46.871Z,1516721686.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:47.224Z,1516721687.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:47.261Z,1516721687.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:47.624Z,1516721687.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:47.661Z,1516721687.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:48.024Z,1516721688.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:48.065Z,1516721688.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:48.423Z,1516721688.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:48.438Z,1516721688.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:48.825Z,1516721688.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:48.865Z,1516721688.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:49.239Z,1516721689.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:49.268Z,1516721689.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:49.640Z,1516721689.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:49.666Z,1516721689.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:50.035Z,1516721690.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:50.062Z,1516721690.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:50.429Z,1516721690.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:50.444Z,1516721690.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:50.829Z,1516721690.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:50.849Z,1516721690.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:51.230Z,1516721691.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:51.249Z,1516721691.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:51.636Z,1516721691.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:51.677Z,1516721691.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:52.039Z,1516721692.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:52.071Z,1516721692.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:52.447Z,1516721692.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:52.471Z,1516721692.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:52.847Z,1516721692.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:52.873Z,1516721692.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:53.232Z,1516721693.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:53.253Z,1516721693.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:53.636Z,1516721693.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:53.677Z,1516721693.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:54.033Z,1516721694.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:54.048Z,1516721694.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:54.430Z,1516721694.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:54.445Z,1516721694.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:54.829Z,1516721694.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:54.852Z,1516721694.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:55.242Z,1516721695.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:55.257Z,1516721695.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:55.642Z,1516721695.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:55.661Z,1516721695.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:56.042Z,1516721696.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:56.061Z,1516721696.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:56.437Z,1516721696.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:56.452Z,1516721696.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:56.829Z,1516721696.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:56.848Z,1516721696.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:57.232Z,1516721697.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:57.251Z,1516721697.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:57.631Z,1516721697.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:57.657Z,1516721697.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:58.043Z,1516721698.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:58.058Z,1516721698.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:58.446Z,1516721698.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:58.461Z,1516721698.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:58.843Z,1516721698.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:58.858Z,1516721698.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:59.228Z,1516721699.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:59.250Z,1516721699.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:34:59.627Z,1516721699.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:34:59.660Z,1516721699.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:00.034Z,1516721700.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:00.056Z,1516721700.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:00.432Z,1516721700.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:00.451Z,1516721700.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:00.828Z,1516721700.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:00.850Z,1516721700.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:01.243Z,1516721701.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:01.258Z,1516721701.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:01.643Z,1516721701.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:01.658Z,1516721701.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:02.043Z,1516721702.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:02.057Z,1516721702.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:02.434Z,1516721702.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:02.456Z,1516721702.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:02.822Z,1516721702.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:02.849Z,1516721702.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:03.227Z,1516721703.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:03.260Z,1516721703.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:03.633Z,1516721703.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:03.648Z,1516721703.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:04.042Z,1516721704.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:04.058Z,1516721704.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:04.443Z,1516721704.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:04.466Z,1516721704.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:04.848Z,1516721704.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:04.862Z,1516721704.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:05.236Z,1516721705.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:05.254Z,1516721705.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:05.624Z,1516721705.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:05.657Z,1516721705.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:06.024Z,1516721706.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:06.060Z,1516721706.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:06.437Z,1516721706.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:06.452Z,1516721706.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:06.824Z,1516721706.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:06.857Z,1516721706.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:07.244Z,1516721707.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:07.259Z,1516721707.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:07.641Z,1516721707.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:07.669Z,1516721707.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:08.047Z,1516721708.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:08.062Z,1516721708.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:08.424Z,1516721708.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:08.458Z,1516721708.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:08.822Z,1516721708.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:08.857Z,1516721708.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:09.225Z,1516721709.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:09.257Z,1516721709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:09.624Z,1516721709.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:09.693Z,1516721709.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:10.043Z,1516721710.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:10.058Z,1516721710.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:10.447Z,1516721710.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:10.462Z,1516721710.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:10.844Z,1516721710.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:10.864Z,1516721710.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:13.924Z,1516721713.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:13.949Z,1516721713.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:14.044Z,1516721714.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:14.067Z,1516721714.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:14.415Z,1516721714.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:14.430Z,1516721714.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:14.816Z,1516721714.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:14.842Z,1516721714.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:15.212Z,1516721715.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:15.226Z,1516721715.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:15.610Z,1516721715.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:15.625Z,1516721715.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:16.007Z,1516721716.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:16.022Z,1516721716.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:16.404Z,1516721716.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:16.431Z,1516721716.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:16.810Z,1516721716.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:16.825Z,1516721716.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:17.221Z,1516721717.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:17.236Z,1516721717.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:17.616Z,1516721717.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:17.636Z,1516721717.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:18.017Z,1516721718.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:18.032Z,1516721718.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:18.397Z,1516721718.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:18.427Z,1516721718.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:18.807Z,1516721718.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:18.827Z,1516721718.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:19.197Z,1516721719.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:19.233Z,1516721719.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:19.600Z,1516721719.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:19.630Z,1516721719.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:20.014Z,1516721720.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:20.037Z,1516721720.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:20.427Z,1516721720.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:20.442Z,1516721720.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:20.815Z,1516721720.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:20.830Z,1516721720.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:21.198Z,1516721721.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:21.230Z,1516721721.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:21.597Z,1516721721.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:21.633Z,1516721721.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:22.023Z,1516721722.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:22.039Z,1516721722.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:22.424Z,1516721722.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:22.439Z,1516721722.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:22.808Z,1516721722.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:22.841Z,1516721722.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:23.197Z,1516721723.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:23.234Z,1516721723.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:23.598Z,1516721723.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:23.622Z,1516721723.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:24.007Z,1516721724.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:24.035Z,1516721724.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:24.411Z,1516721724.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:24.446Z,1516721724.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:24.807Z,1516721724.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:24.834Z,1516721724.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:25.201Z,1516721725.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:25.237Z,1516721725.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:25.600Z,1516721725.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:25.639Z,1516721725.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:26.007Z,1516721726.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:26.042Z,1516721726.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:26.411Z,1516721726.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:26.450Z,1516721726.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:26.825Z,1516721726.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:26.839Z,1516721726.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:27.205Z,1516721727.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:27.240Z,1516721727.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:27.596Z,1516721727.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:27.633Z,1516721727.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:28.007Z,1516721728.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:28.043Z,1516721728.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:28.407Z,1516721728.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:28.438Z,1516721728.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:28.815Z,1516721728.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:28.841Z,1516721728.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:29.201Z,1516721729.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:29.220Z,1516721729.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:29.598Z,1516721729.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:29.613Z,1516721729.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:30.019Z,1516721730.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:30.044Z,1516721730.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:30.419Z,1516721730.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:30.443Z,1516721730.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:30.811Z,1516721730.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:30.826Z,1516721730.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:31.206Z,1516721731.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:31.221Z,1516721731.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:31.608Z,1516721731.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:31.623Z,1516721731.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:32.015Z,1516721732.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:32.030Z,1516721732.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:32.423Z,1516721732.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:32.454Z,1516721732.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:32.807Z,1516721732.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:32.828Z,1516721732.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:33.210Z,1516721733.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:33.225Z,1516721733.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:33.604Z,1516721733.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:33.625Z,1516721733.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:34.023Z,1516721734.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:34.056Z,1516721734.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:34.419Z,1516721734.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:34.434Z,1516721734.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:34.812Z,1516721734.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:34.827Z,1516721734.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:35.207Z,1516721735.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:35.222Z,1516721735.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:35.606Z,1516721735.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:35.621Z,1516721735.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:36.009Z,1516721736.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:36.029Z,1516721736.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:36.414Z,1516721736.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:36.429Z,1516721736.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:36.812Z,1516721736.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:36.826Z,1516721736.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:37.210Z,1516721737.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:37.225Z,1516721737.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:37.605Z,1516721737.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:37.620Z,1516721737.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:38.013Z,1516721738.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:38.028Z,1516721738.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:38.411Z,1516721738.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:38.426Z,1516721738.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:38.811Z,1516721738.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:38.832Z,1516721738.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:39.209Z,1516721739.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:39.224Z,1516721739.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:39.607Z,1516721739.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:39.622Z,1516721739.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:40.008Z,1516721740.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:40.053Z,1516721740.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:40.413Z,1516721740.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:40.433Z,1516721740.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:40.827Z,1516721740.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:40.842Z,1516721740.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:41.214Z,1516721741.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:41.228Z,1516721741.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:41.599Z,1516721741.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:41.631Z,1516721741.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:42.018Z,1516721742.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:42.033Z,1516721742.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:42.419Z,1516721742.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:42.434Z,1516721742.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:42.816Z,1516721742.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:42.839Z,1516721742.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:43.216Z,1516721743.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:43.231Z,1516721743.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:43.609Z,1516721743.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:43.624Z,1516721743.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:44.019Z,1516721744.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:44.034Z,1516721744.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:44.421Z,1516721744.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:44.440Z,1516721744.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:44.815Z,1516721744.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:44.835Z,1516721744.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:45.208Z,1516721745.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:45.223Z,1516721745.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:45.604Z,1516721745.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:45.635Z,1516721745.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:46.019Z,1516721746.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:46.034Z,1516721746.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:46.424Z,1516721746.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:46.439Z,1516721746.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:46.811Z,1516721746.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:46.830Z,1516721746.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:47.198Z,1516721747.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:47.229Z,1516721747.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:47.595Z,1516721747.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:47.627Z,1516721747.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:47.997Z,1516721747.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:48.026Z,1516721748.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:48.411Z,1516721748.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:48.436Z,1516721748.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:48.818Z,1516721748.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:48.833Z,1516721748.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:49.212Z,1516721749.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:49.237Z,1516721749.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:49.596Z,1516721749.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:49.631Z,1516721749.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:49.996Z,1516721749.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:50.005Z,1516721750.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x25318 got:0x5917 2018-01-23T15:35:50.032Z,1516721750.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:50.400Z,1516721750.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:50.433Z,1516721750.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:50.796Z,1516721750.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:50.832Z,1516721750.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:51.212Z,1516721751.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:51.243Z,1516721751.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:51.624Z,1516721751.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:51.639Z,1516721751.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:52.008Z,1516721752.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:52.044Z,1516721752.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:52.400Z,1516721752.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:52.441Z,1516721752.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:52.805Z,1516721752.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:52.834Z,1516721752.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:53.198Z,1516721753.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:53.239Z,1516721753.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:53.597Z,1516721753.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:53.633Z,1516721753.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:54.004Z,1516721754.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:54.044Z,1516721754.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:54.413Z,1516721754.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:54.443Z,1516721754.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:54.813Z,1516721754.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:54.850Z,1516721754.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:55.228Z,1516721755.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:55.243Z,1516721755.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:55.596Z,1516721755.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:55.642Z,1516721755.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:55.996Z,1516721755.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:56.013Z,1516721756.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:56.409Z,1516721756.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:56.445Z,1516721756.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:56.803Z,1516721756.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:56.818Z,1516721756.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:57.220Z,1516721757.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:57.249Z,1516721757.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:57.625Z,1516721757.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:57.650Z,1516721757.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:58.022Z,1516721758.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:58.048Z,1516721758.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:58.398Z,1516721758.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:58.416Z,1516721758.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:58.803Z,1516721758.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:58.848Z,1516721758.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:59.202Z,1516721759.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:59.228Z,1516721759.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:35:59.604Z,1516721759.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:35:59.634Z,1516721759.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:00.012Z,1516721760.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:00.028Z,1516721760.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:00.410Z,1516721760.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:00.453Z,1516721760.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:00.810Z,1516721760.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:00.829Z,1516721760.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:01.212Z,1516721761.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:01.229Z,1516721761.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:01.608Z,1516721761.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:01.623Z,1516721761.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:01.997Z,1516721761.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:02.036Z,1516721762.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:02.408Z,1516721762.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:02.431Z,1516721762.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:02.803Z,1516721762.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:02.838Z,1516721762.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:03.217Z,1516721763.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:03.233Z,1516721763.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:03.618Z,1516721763.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:03.659Z,1516721763.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:04.016Z,1516721764.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:04.036Z,1516721764.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:04.400Z,1516721764.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:04.432Z,1516721764.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:04.808Z,1516721764.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:04.831Z,1516721764.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:05.196Z,1516721765.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:05.233Z,1516721765.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:05.595Z,1516721765.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:05.621Z,1516721765.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:05.996Z,1516721765.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:06.035Z,1516721766.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:06.419Z,1516721766.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:06.434Z,1516721766.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:06.812Z,1516721766.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:06.850Z,1516721766.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:07.212Z,1516721767.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:07.237Z,1516721767.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:07.596Z,1516721767.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:07.635Z,1516721767.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:07.994Z,1516721767.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:08.032Z,1516721768.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:08.397Z,1516721768.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:08.428Z,1516721768.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:08.796Z,1516721768.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:08.835Z,1516721768.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:09.216Z,1516721769.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:09.234Z,1516721769.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:09.621Z,1516721769.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:09.641Z,1516721769.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:10.013Z,1516721770.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:10.037Z,1516721770.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:10.396Z,1516721770.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:10.434Z,1516721770.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:10.800Z,1516721770.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:10.830Z,1516721770.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:11.197Z,1516721771.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:11.235Z,1516721771.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:14.421Z,1516721774.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:14.451Z,1516721774.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:14.554Z,1516721774.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:14.604Z,1516721774.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:14.963Z,1516721774.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:14.994Z,1516721774.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:15.359Z,1516721775.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:15.399Z,1516721775.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:15.754Z,1516721775.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:15.800Z,1516721775.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:16.151Z,1516721776.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:16.204Z,1516721776.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:16.548Z,1516721776.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:16.576Z,1516721776.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:16.951Z,1516721776.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:16.976Z,1516721776.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:17.359Z,1516721777.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:17.389Z,1516721777.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:17.765Z,1516721777.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:17.813Z,1516721777.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:18.162Z,1516721778.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:18.193Z,1516721778.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:18.538Z,1516721778.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:18.587Z,1516721778.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:18.938Z,1516721778.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:18.980Z,1516721778.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:19.368Z,1516721779.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:19.393Z,1516721779.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:19.742Z,1516721779.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:19.786Z,1516721779.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:20.158Z,1516721780.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:20.193Z,1516721780.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:20.562Z,1516721780.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:20.595Z,1516721780.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:20.964Z,1516721780.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:20.989Z,1516721780.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:21.342Z,1516721781.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:21.382Z,1516721781.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:21.742Z,1516721781.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:21.782Z,1516721781.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:22.150Z,1516721782.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:22.209Z,1516721782.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:22.547Z,1516721782.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:22.595Z,1516721782.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:22.948Z,1516721782.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:22.963Z,1516721782.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:23.355Z,1516721783.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:23.376Z,1516721783.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:23.767Z,1516721783.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:23.782Z,1516721783.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:24.180Z,1516721784.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:24.225Z,1516721784.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:24.547Z,1516721784.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:24.603Z,1516721784.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:24.946Z,1516721784.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:24.966Z,1516721784.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:25.368Z,1516721785.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:25.407Z,1516721785.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:25.738Z,1516721785.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:25.810Z,1516721785.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:26.163Z,1516721786.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:26.191Z,1516721786.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:26.566Z,1516721786.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:26.590Z,1516721786.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:26.957Z,1516721786.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:27.000Z,1516721787.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:27.351Z,1516721787.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:27.414Z,1516721787.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:27.759Z,1516721787.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:27.809Z,1516721787.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:28.152Z,1516721788.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:28.207Z,1516721788.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:28.553Z,1516721788.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:28.582Z,1516721788.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:28.942Z,1516721788.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:28.989Z,1516721788.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:29.363Z,1516721789.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:29.390Z,1516721789.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:29.762Z,1516721789.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:29.786Z,1516721789.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:30.173Z,1516721790.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:30.196Z,1516721790.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:30.542Z,1516721790.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:30.581Z,1516721790.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:30.938Z,1516721790.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:30.980Z,1516721790.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:31.343Z,1516721791.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:31.385Z,1516721791.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:31.742Z,1516721791.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:31.804Z,1516721791.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:32.154Z,1516721792.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:32.190Z,1516721792.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:32.562Z,1516721792.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:32.599Z,1516721792.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:32.962Z,1516721792.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:33.009Z,1516721793.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:33.347Z,1516721793.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:33.371Z,1516721793.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:33.750Z,1516721793.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:33.770Z,1516721793.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:34.164Z,1516721794.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:34.207Z,1516721794.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:34.539Z,1516721794.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:34.578Z,1516721794.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:34.942Z,1516721794.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:34.982Z,1516721794.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:35.354Z,1516721795.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:35.394Z,1516721795.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:35.776Z,1516721795.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:35.801Z,1516721795.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:36.162Z,1516721796.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:36.201Z,1516721796.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:36.551Z,1516721796.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:36.595Z,1516721796.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:36.951Z,1516721796.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:36.998Z,1516721796.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:37.352Z,1516721797.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:37.375Z,1516721797.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:37.755Z,1516721797.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:37.770Z,1516721797.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:38.157Z,1516721798.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:38.181Z,1516721798.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:38.566Z,1516721798.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:38.585Z,1516721798.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:38.961Z,1516721798.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:38.977Z,1516721798.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:39.336Z,1516721799.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:39.373Z,1516721799.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:39.740Z,1516721799.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:39.773Z,1516721799.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:40.137Z,1516721800.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:40.168Z,1516721800.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:40.537Z,1516721800.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:40.553Z,1516721800.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:40.940Z,1516721800.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:40.977Z,1516721800.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:41.356Z,1516721801.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:41.385Z,1516721801.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:41.756Z,1516721801.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:41.782Z,1516721801.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:42.160Z,1516721802.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:42.186Z,1516721802.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:42.549Z,1516721802.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:42.587Z,1516721802.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:42.940Z,1516721802.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:42.973Z,1516721802.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:43.350Z,1516721803.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:43.365Z,1516721803.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:43.745Z,1516721803.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:43.761Z,1516721803.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:44.155Z,1516721804.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:44.170Z,1516721804.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:44.556Z,1516721804.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:44.571Z,1516721804.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:44.956Z,1516721804.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:44.972Z,1516721804.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:45.341Z,1516721805.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:45.370Z,1516721805.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:45.746Z,1516721805.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:45.761Z,1516721805.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:46.156Z,1516721806.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:46.172Z,1516721806.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:46.555Z,1516721806.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:46.577Z,1516721806.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:46.599Z,1516721806.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:46.599Z,1516721806.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 246 2018-01-23T15:36:46.599Z,1516721806.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:36:46.619Z,1516721806.619 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:36:46.957Z,1516721806.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:46.972Z,1516721806.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:47.000Z,1516721807.000 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:36:47.000Z,1516721807.000 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 246 2018-01-23T15:36:47.345Z,1516721807.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:47.373Z,1516721807.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:47.375Z,1516721807.375 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:36:47.376Z,1516721807.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:36:47.376Z,1516721807.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:36:47.755Z,1516721807.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:47.777Z,1516721807.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:48.162Z,1516721808.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:48.177Z,1516721808.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:48.562Z,1516721808.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:48.577Z,1516721808.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:48.955Z,1516721808.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:48.976Z,1516721808.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:49.347Z,1516721809.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:49.368Z,1516721809.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:49.737Z,1516721809.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:49.769Z,1516721809.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:50.166Z,1516721810.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:50.181Z,1516721810.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:50.564Z,1516721810.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:50.578Z,1516721810.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:50.960Z,1516721810.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:50.981Z,1516721810.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:51.345Z,1516721811.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:51.375Z,1516721811.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:51.765Z,1516721811.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:51.780Z,1516721811.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:52.155Z,1516721812.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:52.179Z,1516721812.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:52.561Z,1516721812.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:52.577Z,1516721812.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:52.952Z,1516721812.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:52.985Z,1516721812.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:53.346Z,1516721813.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:53.376Z,1516721813.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:53.736Z,1516721813.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:53.765Z,1516721813.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:54.153Z,1516721814.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:54.186Z,1516721814.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:54.552Z,1516721814.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:54.567Z,1516721814.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:54.957Z,1516721814.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:55.014Z,1516721815.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:55.345Z,1516721815.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:55.362Z,1516721815.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:55.738Z,1516721815.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:55.753Z,1516721815.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:56.152Z,1516721816.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:56.177Z,1516721816.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:56.556Z,1516721816.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:56.581Z,1516721816.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:56.952Z,1516721816.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:56.989Z,1516721816.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:57.338Z,1516721817.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:57.361Z,1516721817.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:57.741Z,1516721817.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:57.766Z,1516721817.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:58.152Z,1516721818.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:58.180Z,1516721818.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:58.556Z,1516721818.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:58.571Z,1516721818.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:58.954Z,1516721818.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:58.969Z,1516721818.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:59.346Z,1516721819.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:59.361Z,1516721819.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:59.745Z,1516721819.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:36:59.765Z,1516721819.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:59.765Z,1516721819.765 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 246 2018-01-23T15:36:59.765Z,1516721819.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:36:59.771Z,1516721819.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:36:59.771Z,1516721819.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 246 2018-01-23T15:36:59.771Z,1516721819.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:36:59.796Z,1516721819.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:36:59.796Z,1516721819.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:37:00.164Z,1516721820.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:00.211Z,1516721820.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:37:00.211Z,1516721820.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 246 2018-01-23T15:37:00.212Z,1516721820.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:37:00.212Z,1516721820.212 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 246 2018-01-23T15:37:00.560Z,1516721820.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:00.579Z,1516721820.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:37:00.580Z,1516721820.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:37:00.580Z,1516721820.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:37:00.580Z,1516721820.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:37:00.581Z,1516721820.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:37:00.581Z,1516721820.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:37:00.960Z,1516721820.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:00.975Z,1516721820.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:37:00.976Z,1516721820.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:01.340Z,1516721821.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:01.366Z,1516721821.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:37:01.367Z,1516721821.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:01.740Z,1516721821.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:01.774Z,1516721821.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:37:01.775Z,1516721821.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:02.165Z,1516721822.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:02.184Z,1516721822.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:37:02.185Z,1516721822.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:02.553Z,1516721822.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:02.583Z,1516721822.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:37:02.584Z,1516721822.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:02.957Z,1516721822.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:02.976Z,1516721822.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:37:02.977Z,1516721822.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:03.345Z,1516721823.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:03.373Z,1516721823.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:37:03.374Z,1516721823.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:03.756Z,1516721823.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:03.774Z,1516721823.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:37:03.775Z,1516721823.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:04.158Z,1516721824.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:04.172Z,1516721824.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:37:04.173Z,1516721824.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:04.560Z,1516721824.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:04.575Z,1516721824.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:37:04.576Z,1516721824.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:04.956Z,1516721824.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:04.978Z,1516721824.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:37:04.979Z,1516721824.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:05.341Z,1516721825.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:05.375Z,1516721825.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:37:05.376Z,1516721825.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:05.737Z,1516721825.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:05.772Z,1516721825.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:37:05.773Z,1516721825.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:06.149Z,1516721826.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:06.184Z,1516721826.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:37:06.185Z,1516721826.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:06.561Z,1516721826.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:06.575Z,1516721826.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:37:06.576Z,1516721826.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:06.956Z,1516721826.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:06.978Z,1516721826.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:37:06.979Z,1516721826.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:07.337Z,1516721827.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:07.369Z,1516721827.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:37:07.370Z,1516721827.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:07.739Z,1516721827.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:07.754Z,1516721827.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:37:07.783Z,1516721827.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:08.164Z,1516721828.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:08.179Z,1516721828.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:37:08.180Z,1516721828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:08.572Z,1516721828.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:08.593Z,1516721828.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:37:08.594Z,1516721828.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:08.965Z,1516721828.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:08.984Z,1516721828.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:37:08.985Z,1516721828.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:09.343Z,1516721829.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:09.380Z,1516721829.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:37:09.381Z,1516721829.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:09.739Z,1516721829.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:09.754Z,1516721829.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:37:09.755Z,1516721829.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:10.155Z,1516721830.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:10.184Z,1516721830.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:37:10.185Z,1516721830.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:10.560Z,1516721830.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:10.586Z,1516721830.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:37:10.587Z,1516721830.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:10.960Z,1516721830.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:10.987Z,1516721830.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:37:10.988Z,1516721830.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:11.344Z,1516721831.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:11.359Z,1516721831.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:37:11.360Z,1516721831.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:14.456Z,1516721834.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:14.486Z,1516721834.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T15:37:14.487Z,1516721834.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:14.588Z,1516721834.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:14.608Z,1516721834.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:37:14.609Z,1516721834.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:14.944Z,1516721834.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:14.964Z,1516721834.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:37:14.965Z,1516721834.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:15.356Z,1516721835.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:15.391Z,1516721835.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:37:15.392Z,1516721835.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:15.732Z,1516721835.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:15.772Z,1516721835.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:37:15.773Z,1516721835.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:16.136Z,1516721836.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:16.146Z,1516721836.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x51743 got:0x37334 2018-01-23T15:37:16.165Z,1516721836.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:37:16.166Z,1516721836.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:16.550Z,1516721836.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:16.565Z,1516721836.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:37:16.566Z,1516721836.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:16.931Z,1516721836.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:16.963Z,1516721836.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:37:16.964Z,1516721836.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:17.349Z,1516721837.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:17.366Z,1516721837.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:37:17.367Z,1516721837.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:17.754Z,1516721837.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:17.769Z,1516721837.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:37:17.770Z,1516721837.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:18.145Z,1516721838.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:18.176Z,1516721838.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:37:18.177Z,1516721838.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:18.530Z,1516721838.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:18.561Z,1516721838.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:37:18.562Z,1516721838.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:18.929Z,1516721838.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:18.976Z,1516721838.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:37:18.977Z,1516721838.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:19.333Z,1516721839.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:19.356Z,1516721839.356 [PNI_TCM](ERROR): CRC does not match. Expected:0x65064 got:0x18456 2018-01-23T15:37:19.380Z,1516721839.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:37:19.381Z,1516721839.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:19.744Z,1516721839.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:19.836Z,1516721839.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:20.145Z,1516721840.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:20.165Z,1516721840.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:20.546Z,1516721840.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:20.570Z,1516721840.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:20.955Z,1516721840.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:20.970Z,1516721840.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:21.351Z,1516721841.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:21.366Z,1516721841.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:21.731Z,1516721841.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:21.767Z,1516721841.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:22.128Z,1516721842.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:22.169Z,1516721842.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:22.533Z,1516721842.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:22.567Z,1516721842.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:22.928Z,1516721842.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:22.969Z,1516721842.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:23.353Z,1516721843.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:23.368Z,1516721843.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:23.748Z,1516721843.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:23.777Z,1516721843.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:24.149Z,1516721844.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:24.159Z,1516721844.159 [PNI_TCM](ERROR): CRC does not match. Expected:0x54884 got:0x33938 2018-01-23T15:37:24.185Z,1516721844.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:24.533Z,1516721844.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:24.563Z,1516721844.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:24.930Z,1516721844.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:24.968Z,1516721844.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:25.329Z,1516721845.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:25.371Z,1516721845.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:25.729Z,1516721845.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:25.757Z,1516721845.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:26.129Z,1516721846.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:26.170Z,1516721846.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:26.564Z,1516721846.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:26.579Z,1516721846.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:26.959Z,1516721846.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:26.997Z,1516721846.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:27.349Z,1516721847.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:27.372Z,1516721847.372 [PNI_TCM](ERROR): CRC does not match. Expected:0x43817 got:0x191 2018-01-23T15:37:27.401Z,1516721847.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:27.738Z,1516721847.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:27.768Z,1516721847.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:28.144Z,1516721848.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:28.163Z,1516721848.163 [PNI_TCM](ERROR): CRC does not match. Expected:0x23931 got:0x55933 2018-01-23T15:37:28.189Z,1516721848.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:28.539Z,1516721848.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:28.574Z,1516721848.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:28.940Z,1516721848.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:28.980Z,1516721848.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:29.346Z,1516721849.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:29.364Z,1516721849.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:29.748Z,1516721849.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:29.763Z,1516721849.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:30.142Z,1516721850.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:30.186Z,1516721850.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:30.542Z,1516721850.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:30.562Z,1516721850.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:30.938Z,1516721850.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:30.959Z,1516721850.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:31.338Z,1516721851.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:31.358Z,1516721851.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:31.736Z,1516721851.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:31.786Z,1516721851.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:32.138Z,1516721852.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:32.153Z,1516721852.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:32.549Z,1516721852.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:32.568Z,1516721852.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:32.949Z,1516721852.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:32.969Z,1516721852.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:33.349Z,1516721853.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:33.390Z,1516721853.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:33.740Z,1516721853.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:33.778Z,1516721853.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:34.139Z,1516721854.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:34.159Z,1516721854.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:34.529Z,1516721854.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:34.573Z,1516721854.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:34.941Z,1516721854.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:34.958Z,1516721854.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:35.344Z,1516721855.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:35.380Z,1516721855.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:35.756Z,1516721855.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:35.774Z,1516721855.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:36.153Z,1516721856.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:36.173Z,1516721856.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:36.544Z,1516721856.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:36.580Z,1516721856.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:36.932Z,1516721856.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:36.960Z,1516721856.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:37.332Z,1516721857.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:37.368Z,1516721857.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:37.733Z,1516721857.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:37.764Z,1516721857.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:38.127Z,1516721858.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:38.157Z,1516721858.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:38.544Z,1516721858.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:38.584Z,1516721858.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:38.955Z,1516721858.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:38.974Z,1516721858.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:39.351Z,1516721859.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:39.368Z,1516721859.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:39.728Z,1516721859.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:39.791Z,1516721859.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:40.132Z,1516721860.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:40.166Z,1516721860.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:40.529Z,1516721860.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:40.572Z,1516721860.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:40.928Z,1516721860.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:40.969Z,1516721860.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:41.339Z,1516721861.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:41.373Z,1516721861.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:41.753Z,1516721861.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:41.768Z,1516721861.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:42.139Z,1516721862.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:42.176Z,1516721862.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:42.528Z,1516721862.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:42.569Z,1516721862.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:42.928Z,1516721862.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:42.967Z,1516721862.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:43.332Z,1516721863.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:43.366Z,1516721863.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:43.729Z,1516721863.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:43.766Z,1516721863.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:44.128Z,1516721864.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:44.171Z,1516721864.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:44.540Z,1516721864.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:44.573Z,1516721864.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:44.953Z,1516721864.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:44.968Z,1516721864.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:45.339Z,1516721865.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:45.369Z,1516721865.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:45.728Z,1516721865.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:45.770Z,1516721865.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:46.128Z,1516721866.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:46.166Z,1516721866.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:46.533Z,1516721866.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:46.570Z,1516721866.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:46.932Z,1516721866.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:46.965Z,1516721866.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:47.340Z,1516721867.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:47.375Z,1516721867.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:47.754Z,1516721867.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:47.768Z,1516721867.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:48.139Z,1516721868.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:48.166Z,1516721868.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:48.528Z,1516721868.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:48.565Z,1516721868.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:48.928Z,1516721868.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:48.969Z,1516721868.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:49.333Z,1516721869.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:49.365Z,1516721869.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:49.729Z,1516721869.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:49.766Z,1516721869.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:50.127Z,1516721870.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:50.167Z,1516721870.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:50.539Z,1516721870.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:50.577Z,1516721870.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:50.956Z,1516721870.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:50.971Z,1516721870.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:51.339Z,1516721871.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:51.369Z,1516721871.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:51.729Z,1516721871.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:51.765Z,1516721871.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:52.128Z,1516721872.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:52.165Z,1516721872.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:52.529Z,1516721872.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:52.567Z,1516721872.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:52.929Z,1516721872.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:52.966Z,1516721872.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:53.357Z,1516721873.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:53.377Z,1516721873.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:53.757Z,1516721873.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:53.772Z,1516721873.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:54.140Z,1516721874.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:54.173Z,1516721874.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:54.528Z,1516721874.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:54.565Z,1516721874.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:54.928Z,1516721874.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:54.967Z,1516721874.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:55.332Z,1516721875.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:55.366Z,1516721875.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:55.729Z,1516721875.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:55.756Z,1516721875.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:56.128Z,1516721876.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:56.143Z,1516721876.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:56.539Z,1516721876.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:56.575Z,1516721876.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:56.951Z,1516721876.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:56.980Z,1516721876.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:57.352Z,1516721877.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:57.378Z,1516721877.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:57.736Z,1516721877.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:57.753Z,1516721877.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:58.133Z,1516721878.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:58.149Z,1516721878.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:58.533Z,1516721878.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:58.560Z,1516721878.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:58.934Z,1516721878.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:58.953Z,1516721878.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:59.343Z,1516721879.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:59.381Z,1516721879.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:37:59.751Z,1516721879.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:37:59.766Z,1516721879.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:00.152Z,1516721880.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:00.184Z,1516721880.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:00.536Z,1516721880.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:00.552Z,1516721880.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:00.937Z,1516721880.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:00.952Z,1516721880.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:01.336Z,1516721881.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:01.352Z,1516721881.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:01.732Z,1516721881.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:01.765Z,1516721881.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:02.143Z,1516721882.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:02.158Z,1516721882.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:02.546Z,1516721882.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:02.562Z,1516721882.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:02.952Z,1516721882.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:02.967Z,1516721882.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:03.349Z,1516721883.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:03.364Z,1516721883.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:03.731Z,1516721883.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:03.765Z,1516721883.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:04.132Z,1516721884.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:04.165Z,1516721884.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:04.544Z,1516721884.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:04.559Z,1516721884.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:04.926Z,1516721884.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:04.954Z,1516721884.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:05.349Z,1516721885.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:05.364Z,1516721885.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:05.752Z,1516721885.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:05.771Z,1516721885.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:06.140Z,1516721886.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:06.173Z,1516721886.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:06.535Z,1516721886.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:06.567Z,1516721886.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:06.935Z,1516721886.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:06.951Z,1516721886.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:07.333Z,1516721887.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:07.353Z,1516721887.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:07.737Z,1516721887.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:07.753Z,1516721887.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:08.133Z,1516721888.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:08.173Z,1516721888.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:08.540Z,1516721888.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:08.556Z,1516721888.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:08.944Z,1516721888.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:08.981Z,1516721888.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:09.343Z,1516721889.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:09.361Z,1516721889.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:09.741Z,1516721889.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:09.757Z,1516721889.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:10.138Z,1516721890.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:10.153Z,1516721890.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:10.539Z,1516721890.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:10.554Z,1516721890.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:10.937Z,1516721890.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:10.953Z,1516721890.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:11.342Z,1516721891.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:11.365Z,1516721891.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:11.748Z,1516721891.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:11.763Z,1516721891.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:14.863Z,1516721894.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:14.886Z,1516721894.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:14.995Z,1516721894.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:15.041Z,1516721895.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:15.337Z,1516721895.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:15.353Z,1516721895.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:15.742Z,1516721895.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:15.758Z,1516721895.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:16.136Z,1516721896.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:16.152Z,1516721896.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:16.542Z,1516721896.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:16.561Z,1516721896.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:16.951Z,1516721896.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:16.966Z,1516721896.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:17.348Z,1516721897.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:17.363Z,1516721897.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:17.732Z,1516721897.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:17.755Z,1516721897.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:18.137Z,1516721898.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:18.153Z,1516721898.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:18.536Z,1516721898.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:18.557Z,1516721898.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:18.936Z,1516721898.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:18.953Z,1516721898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:19.348Z,1516721899.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:19.363Z,1516721899.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:19.751Z,1516721899.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:19.766Z,1516721899.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:20.146Z,1516721900.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:20.162Z,1516721900.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:20.535Z,1516721900.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:20.565Z,1516721900.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:20.940Z,1516721900.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:20.956Z,1516721900.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:21.335Z,1516721901.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:21.355Z,1516721901.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:21.737Z,1516721901.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:21.756Z,1516721901.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:22.132Z,1516721902.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:22.155Z,1516721902.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:22.550Z,1516721902.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:22.565Z,1516721902.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:22.951Z,1516721902.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:22.965Z,1516721902.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:23.347Z,1516721903.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:23.362Z,1516721903.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:23.735Z,1516721903.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:23.754Z,1516721903.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:24.137Z,1516721904.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:24.153Z,1516721904.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:24.536Z,1516721904.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:24.557Z,1516721904.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:24.932Z,1516721904.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:24.956Z,1516721904.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:25.348Z,1516721905.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:25.363Z,1516721905.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:25.750Z,1516721905.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:25.765Z,1516721905.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:26.146Z,1516721906.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:26.162Z,1516721906.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:26.537Z,1516721906.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:26.552Z,1516721906.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:26.931Z,1516721906.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:26.955Z,1516721906.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:27.332Z,1516721907.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:27.356Z,1516721907.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:27.735Z,1516721907.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:27.765Z,1516721907.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:28.128Z,1516721908.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:28.166Z,1516721908.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:28.548Z,1516721908.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:28.563Z,1516721908.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:28.952Z,1516721908.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:28.967Z,1516721908.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:29.348Z,1516721909.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:29.363Z,1516721909.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:29.728Z,1516721909.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:29.765Z,1516721909.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:30.128Z,1516721910.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:30.156Z,1516721910.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:30.529Z,1516721910.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:30.565Z,1516721910.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:30.932Z,1516721910.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:30.965Z,1516721910.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:31.346Z,1516721911.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:31.368Z,1516721911.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:31.750Z,1516721911.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:31.765Z,1516721911.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:32.159Z,1516721912.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:32.174Z,1516721912.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:32.529Z,1516721912.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:32.556Z,1516721912.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:32.933Z,1516721912.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:32.965Z,1516721912.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:33.328Z,1516721913.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:33.365Z,1516721913.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:33.733Z,1516721913.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:33.762Z,1516721913.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:34.132Z,1516721914.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:34.160Z,1516721914.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:34.543Z,1516721914.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:34.580Z,1516721914.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:34.953Z,1516721914.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:34.972Z,1516721914.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:35.352Z,1516721915.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:35.367Z,1516721915.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:35.728Z,1516721915.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:35.765Z,1516721915.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:36.132Z,1516721916.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:36.167Z,1516721916.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:36.535Z,1516721916.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:36.563Z,1516721916.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:36.928Z,1516721916.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:36.969Z,1516721916.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:37.343Z,1516721917.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:37.372Z,1516721917.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:37.743Z,1516721917.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:37.770Z,1516721917.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:38.139Z,1516721918.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:38.166Z,1516721918.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:38.528Z,1516721918.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:38.574Z,1516721918.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:38.933Z,1516721918.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:38.969Z,1516721918.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:39.327Z,1516721919.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:39.369Z,1516721919.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:39.737Z,1516721919.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:39.776Z,1516721919.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:40.136Z,1516721920.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:40.173Z,1516721920.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:40.548Z,1516721920.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:40.572Z,1516721920.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:40.955Z,1516721920.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:40.979Z,1516721920.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:41.348Z,1516721921.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:41.383Z,1516721921.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:41.738Z,1516721921.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:41.754Z,1516721921.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:42.139Z,1516721922.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:42.154Z,1516721922.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:42.536Z,1516721922.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:42.556Z,1516721922.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:42.934Z,1516721922.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:42.950Z,1516721922.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:43.344Z,1516721923.344 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:43.364Z,1516721923.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:43.748Z,1516721923.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:43.763Z,1516721923.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:44.143Z,1516721924.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:44.165Z,1516721924.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:44.544Z,1516721924.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:44.560Z,1516721924.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:44.933Z,1516721924.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:44.956Z,1516721924.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:45.336Z,1516721925.336 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:45.358Z,1516721925.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:45.739Z,1516721925.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:45.767Z,1516721925.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:46.133Z,1516721926.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:46.161Z,1516721926.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:46.549Z,1516721926.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:46.564Z,1516721926.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:46.944Z,1516721926.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:46.960Z,1516721926.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:47.341Z,1516721927.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:47.380Z,1516721927.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:47.742Z,1516721927.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:47.758Z,1516721927.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:48.138Z,1516721928.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:48.155Z,1516721928.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:48.537Z,1516721928.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:48.560Z,1516721928.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:48.932Z,1516721928.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:48.960Z,1516721928.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:49.348Z,1516721929.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:49.370Z,1516721929.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:49.753Z,1516721929.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:49.769Z,1516721929.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:50.149Z,1516721930.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:50.164Z,1516721930.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:50.551Z,1516721930.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:50.566Z,1516721930.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:50.926Z,1516721930.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:50.965Z,1516721930.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:51.353Z,1516721931.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:51.373Z,1516721931.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:51.757Z,1516721931.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:51.772Z,1516721931.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:52.148Z,1516721932.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:52.164Z,1516721932.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:52.529Z,1516721932.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:52.565Z,1516721932.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:52.932Z,1516721932.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:52.968Z,1516721932.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:53.353Z,1516721933.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:53.368Z,1516721933.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:53.753Z,1516721933.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:53.768Z,1516721933.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:54.139Z,1516721934.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:54.169Z,1516721934.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:54.533Z,1516721934.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:54.566Z,1516721934.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:54.928Z,1516721934.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:54.966Z,1516721934.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:55.339Z,1516721935.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:55.375Z,1516721935.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:55.753Z,1516721935.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:55.768Z,1516721935.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:56.139Z,1516721936.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:56.166Z,1516721936.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:56.529Z,1516721936.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:56.567Z,1516721936.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:56.926Z,1516721936.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:56.941Z,1516721936.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:57.340Z,1516721937.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:57.367Z,1516721937.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:57.743Z,1516721937.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:57.777Z,1516721937.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:58.139Z,1516721938.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:58.176Z,1516721938.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:58.529Z,1516721938.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:58.569Z,1516721938.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:58.932Z,1516721938.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:58.948Z,1516721938.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:59.343Z,1516721939.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:59.371Z,1516721939.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:38:59.743Z,1516721939.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:38:59.777Z,1516721939.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:00.139Z,1516721940.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:00.167Z,1516721940.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:00.537Z,1516721940.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:00.553Z,1516721940.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:00.936Z,1516721940.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:00.953Z,1516721940.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:01.343Z,1516721941.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:01.359Z,1516721941.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:01.743Z,1516721941.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:01.783Z,1516721941.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:02.139Z,1516721942.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:02.155Z,1516721942.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:02.537Z,1516721942.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:02.552Z,1516721942.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:02.932Z,1516721942.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:02.959Z,1516721942.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:03.343Z,1516721943.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:03.359Z,1516721943.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:03.747Z,1516721943.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:03.768Z,1516721943.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:04.147Z,1516721944.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:04.162Z,1516721944.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:04.533Z,1516721944.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:04.556Z,1516721944.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:04.937Z,1516721944.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:04.952Z,1516721944.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:05.346Z,1516721945.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:05.361Z,1516721945.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:05.745Z,1516721945.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:05.761Z,1516721945.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:06.146Z,1516721946.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:06.161Z,1516721946.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:06.541Z,1516721946.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:06.557Z,1516721946.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:06.936Z,1516721946.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:06.952Z,1516721946.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:07.347Z,1516721947.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:07.368Z,1516721947.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:07.746Z,1516721947.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:07.761Z,1516721947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:08.146Z,1516721948.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:08.161Z,1516721948.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:08.538Z,1516721948.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:08.553Z,1516721948.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:08.932Z,1516721948.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:08.959Z,1516721948.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:09.347Z,1516721949.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:09.362Z,1516721949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:09.751Z,1516721949.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:09.765Z,1516721949.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:10.147Z,1516721950.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:10.162Z,1516721950.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:10.535Z,1516721950.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:10.557Z,1516721950.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:10.560Z,1516721950.560 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:39:10.560Z,1516721950.560 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:39:10.560Z,1516721950.560 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:39:10.560Z,1516721950.560 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:39:10.938Z,1516721950.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:10.961Z,1516721950.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:10.964Z,1516721950.964 [Default:CheckIn:D] Stopped 2018-01-23T15:39:10.964Z,1516721950.964 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:39:11.347Z,1516721951.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:11.362Z,1516721951.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:11.366Z,1516721951.366 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 741.315039 min 2018-01-23T15:39:11.366Z,1516721951.366 [Default:CheckIn:E] Stopped 2018-01-23T15:39:11.366Z,1516721951.366 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:39:11.366Z,1516721951.366 [Default:CheckIn] Stopped 2018-01-23T15:39:11.366Z,1516721951.366 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:39:11.367Z,1516721951.367 [Default:CheckIn](INFO): Running loop #73 2018-01-23T15:39:11.367Z,1516721951.367 [Default:CheckIn] Running Loop=73 2018-01-23T15:39:11.367Z,1516721951.367 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:39:11.367Z,1516721951.367 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:39:11.751Z,1516721951.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:11.766Z,1516721951.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:12.148Z,1516721952.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:12.163Z,1516721952.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:15.225Z,1516721955.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:15.250Z,1516721955.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:15.357Z,1516721955.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:15.400Z,1516721955.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:15.704Z,1516721955.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:15.719Z,1516721955.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:16.119Z,1516721956.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:16.165Z,1516721956.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:16.516Z,1516721956.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:16.545Z,1516721956.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:16.899Z,1516721956.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:16.914Z,1516721956.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:17.303Z,1516721957.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:17.318Z,1516721957.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:17.700Z,1516721957.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:17.719Z,1516721957.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:18.098Z,1516721958.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:18.122Z,1516721958.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:18.512Z,1516721958.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:18.527Z,1516721958.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:18.910Z,1516721958.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:18.925Z,1516721958.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:19.310Z,1516721959.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:19.329Z,1516721959.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:19.704Z,1516721959.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:19.719Z,1516721959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:20.100Z,1516721960.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:20.121Z,1516721960.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:20.497Z,1516721960.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:20.520Z,1516721960.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:20.905Z,1516721960.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:20.920Z,1516721960.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:21.300Z,1516721961.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:21.321Z,1516721961.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:21.714Z,1516721961.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:21.737Z,1516721961.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:22.118Z,1516721962.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:22.133Z,1516721962.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:22.512Z,1516721962.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:22.535Z,1516721962.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:22.893Z,1516721962.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:22.928Z,1516721962.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:23.293Z,1516721963.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:23.332Z,1516721963.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:23.694Z,1516721963.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:23.726Z,1516721963.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:24.092Z,1516721964.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:24.130Z,1516721964.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:24.513Z,1516721964.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:24.530Z,1516721964.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:24.911Z,1516721964.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:24.932Z,1516721964.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:25.308Z,1516721965.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:25.332Z,1516721965.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:25.692Z,1516721965.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:25.727Z,1516721965.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:26.090Z,1516721966.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:26.114Z,1516721966.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:26.493Z,1516721966.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:26.521Z,1516721966.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:26.893Z,1516721966.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:26.908Z,1516721966.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:27.290Z,1516721967.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:27.306Z,1516721967.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:27.716Z,1516721967.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:27.749Z,1516721967.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:28.111Z,1516721968.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:28.139Z,1516721968.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:28.508Z,1516721968.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:28.543Z,1516721968.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:28.904Z,1516721968.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:28.945Z,1516721968.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:29.300Z,1516721969.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:29.315Z,1516721969.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:29.698Z,1516721969.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:29.717Z,1516721969.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:30.098Z,1516721970.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:30.118Z,1516721970.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:30.510Z,1516721970.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:30.525Z,1516721970.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:30.910Z,1516721970.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:30.925Z,1516721970.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:31.310Z,1516721971.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:31.325Z,1516721971.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:31.701Z,1516721971.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:31.716Z,1516721971.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:32.096Z,1516721972.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:32.116Z,1516721972.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:32.496Z,1516721972.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:32.518Z,1516721972.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:32.901Z,1516721972.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:32.924Z,1516721972.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:33.305Z,1516721973.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:33.325Z,1516721973.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:33.711Z,1516721973.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:33.726Z,1516721973.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:34.114Z,1516721974.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:34.129Z,1516721974.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:34.510Z,1516721974.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:34.526Z,1516721974.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:34.896Z,1516721974.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:34.918Z,1516721974.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:35.301Z,1516721975.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:35.320Z,1516721975.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:35.700Z,1516721975.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:35.727Z,1516721975.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:36.104Z,1516721976.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:36.123Z,1516721976.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:36.512Z,1516721976.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:36.527Z,1516721976.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:36.910Z,1516721976.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:36.926Z,1516721976.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:37.310Z,1516721977.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:37.326Z,1516721977.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:37.692Z,1516721977.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:37.721Z,1516721977.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:38.092Z,1516721978.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:38.125Z,1516721978.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:38.505Z,1516721978.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:38.525Z,1516721978.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:38.893Z,1516721978.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:38.929Z,1516721978.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:39.304Z,1516721979.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:39.329Z,1516721979.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:39.715Z,1516721979.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:39.730Z,1516721979.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:40.116Z,1516721980.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:40.131Z,1516721980.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:40.508Z,1516721980.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:40.535Z,1516721980.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:40.892Z,1516721980.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:40.918Z,1516721980.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:41.292Z,1516721981.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:41.328Z,1516721981.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:41.693Z,1516721981.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:41.721Z,1516721981.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:42.096Z,1516721982.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:42.122Z,1516721982.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:42.511Z,1516721982.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:42.531Z,1516721982.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:42.907Z,1516721982.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:42.937Z,1516721982.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:43.303Z,1516721983.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:43.341Z,1516721983.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:43.699Z,1516721983.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:43.714Z,1516721983.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:44.102Z,1516721984.102 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:44.134Z,1516721984.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:44.500Z,1516721984.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:44.544Z,1516721984.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:44.901Z,1516721984.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:44.916Z,1516721984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:45.293Z,1516721985.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:45.313Z,1516721985.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:45.711Z,1516721985.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:45.743Z,1516721985.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:46.115Z,1516721986.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:46.141Z,1516721986.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:46.505Z,1516721986.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:46.546Z,1516721986.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:46.904Z,1516721986.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:46.921Z,1516721986.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:47.297Z,1516721987.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:47.312Z,1516721987.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:47.702Z,1516721987.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:47.717Z,1516721987.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:47.720Z,1516721987.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:47.720Z,1516721987.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 247 2018-01-23T15:39:47.720Z,1516721987.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:39:47.752Z,1516721987.752 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:39:48.098Z,1516721988.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:48.121Z,1516721988.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:48.146Z,1516721988.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:39:48.146Z,1516721988.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 247 2018-01-23T15:39:48.510Z,1516721988.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:48.525Z,1516721988.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:48.527Z,1516721988.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:39:48.527Z,1516721988.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:39:48.528Z,1516721988.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:39:48.915Z,1516721988.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:48.930Z,1516721988.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:49.311Z,1516721989.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:49.333Z,1516721989.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:49.699Z,1516721989.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:49.732Z,1516721989.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:50.099Z,1516721990.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:50.119Z,1516721990.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:50.495Z,1516721990.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:50.526Z,1516721990.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:50.902Z,1516721990.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:50.921Z,1516721990.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:51.296Z,1516721991.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:51.319Z,1516721991.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:51.710Z,1516721991.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:51.726Z,1516721991.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:52.114Z,1516721992.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:52.129Z,1516721992.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:52.511Z,1516721992.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:52.533Z,1516721992.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:52.904Z,1516721992.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:52.921Z,1516721992.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:53.301Z,1516721993.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:53.321Z,1516721993.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:53.700Z,1516721993.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:53.720Z,1516721993.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:54.095Z,1516721994.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:54.128Z,1516721994.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:54.512Z,1516721994.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:54.527Z,1516721994.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:54.910Z,1516721994.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:54.926Z,1516721994.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:55.311Z,1516721995.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:55.333Z,1516721995.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:55.709Z,1516721995.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:55.724Z,1516721995.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:56.090Z,1516721996.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:56.122Z,1516721996.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:56.503Z,1516721996.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:56.523Z,1516721996.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:56.893Z,1516721996.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:56.921Z,1516721996.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:57.304Z,1516721997.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:57.329Z,1516721997.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:57.712Z,1516721997.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:57.733Z,1516721997.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:58.119Z,1516721998.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:58.134Z,1516721998.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:58.508Z,1516721998.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:58.538Z,1516721998.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:58.892Z,1516721998.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:58.929Z,1516721998.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:59.296Z,1516721999.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:59.325Z,1516721999.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:39:59.694Z,1516721999.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:39:59.722Z,1516721999.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:00.097Z,1516722000.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:00.134Z,1516722000.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:00.522Z,1516722000.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:00.536Z,1516722000.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:00.908Z,1516722000.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:00.939Z,1516722000.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:00.940Z,1516722000.940 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 247 2018-01-23T15:40:00.940Z,1516722000.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:40:00.941Z,1516722000.941 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:00.942Z,1516722000.942 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 247 2018-01-23T15:40:00.942Z,1516722000.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:40:00.967Z,1516722000.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:40:00.967Z,1516722000.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:40:01.308Z,1516722001.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:01.358Z,1516722001.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:40:01.358Z,1516722001.358 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 247 2018-01-23T15:40:01.363Z,1516722001.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:40:01.363Z,1516722001.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 247 2018-01-23T15:40:01.698Z,1516722001.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:01.730Z,1516722001.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:40:01.731Z,1516722001.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:40:01.731Z,1516722001.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:40:01.732Z,1516722001.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:40:01.732Z,1516722001.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:40:01.732Z,1516722001.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:40:02.091Z,1516722002.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:02.115Z,1516722002.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:40:02.116Z,1516722002.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:02.493Z,1516722002.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:02.509Z,1516722002.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:40:02.510Z,1516722002.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:02.894Z,1516722002.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:02.912Z,1516722002.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:40:02.913Z,1516722002.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:03.295Z,1516722003.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:03.311Z,1516722003.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:40:03.312Z,1516722003.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:03.721Z,1516722003.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:03.746Z,1516722003.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:40:03.748Z,1516722003.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:04.120Z,1516722004.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:04.147Z,1516722004.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:40:04.148Z,1516722004.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:04.508Z,1516722004.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:04.536Z,1516722004.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:40:04.537Z,1516722004.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:04.897Z,1516722004.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:04.912Z,1516722004.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:40:04.913Z,1516722004.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:05.299Z,1516722005.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:05.314Z,1516722005.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:40:05.315Z,1516722005.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:05.702Z,1516722005.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:05.718Z,1516722005.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:40:05.719Z,1516722005.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:06.096Z,1516722006.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:06.128Z,1516722006.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:40:06.129Z,1516722006.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:06.511Z,1516722006.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:06.526Z,1516722006.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:40:06.527Z,1516722006.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:06.907Z,1516722006.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:06.935Z,1516722006.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:40:06.936Z,1516722006.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:07.311Z,1516722007.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:07.326Z,1516722007.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:40:07.327Z,1516722007.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:07.705Z,1516722007.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:07.719Z,1516722007.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:40:07.720Z,1516722007.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:08.090Z,1516722008.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:08.117Z,1516722008.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:40:08.118Z,1516722008.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:08.492Z,1516722008.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:08.524Z,1516722008.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:40:08.525Z,1516722008.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:08.893Z,1516722008.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:08.920Z,1516722008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:40:08.921Z,1516722008.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:09.292Z,1516722009.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:09.324Z,1516722009.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:40:09.325Z,1516722009.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:09.711Z,1516722009.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:09.726Z,1516722009.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:40:09.727Z,1516722009.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:10.116Z,1516722010.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:10.130Z,1516722010.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:40:10.131Z,1516722010.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:10.511Z,1516722010.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:10.526Z,1516722010.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:40:10.527Z,1516722010.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:10.892Z,1516722010.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:10.918Z,1516722010.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:40:10.919Z,1516722010.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:11.292Z,1516722011.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:11.328Z,1516722011.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:40:11.329Z,1516722011.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:11.693Z,1516722011.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:11.724Z,1516722011.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:40:11.725Z,1516722011.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:12.093Z,1516722012.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:12.124Z,1516722012.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:40:12.125Z,1516722012.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:12.515Z,1516722012.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:12.530Z,1516722012.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:40:12.531Z,1516722012.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:15.617Z,1516722015.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:15.634Z,1516722015.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T15:40:15.635Z,1516722015.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:15.762Z,1516722015.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:15.809Z,1516722015.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T15:40:15.809Z,1516722015.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:16.100Z,1516722016.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:16.122Z,1516722016.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:40:16.123Z,1516722016.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:16.508Z,1516722016.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:16.534Z,1516722016.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:40:16.535Z,1516722016.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:16.904Z,1516722016.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:16.923Z,1516722016.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:40:16.924Z,1516722016.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:17.299Z,1516722017.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:17.321Z,1516722017.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:40:17.322Z,1516722017.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:17.716Z,1516722017.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:17.730Z,1516722017.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:40:17.731Z,1516722017.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:18.114Z,1516722018.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:18.129Z,1516722018.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:40:18.130Z,1516722018.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:18.514Z,1516722018.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:18.529Z,1516722018.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:40:18.530Z,1516722018.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:18.903Z,1516722018.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:18.928Z,1516722018.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:40:18.929Z,1516722018.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:19.300Z,1516722019.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:19.322Z,1516722019.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:40:19.323Z,1516722019.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:19.701Z,1516722019.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:19.723Z,1516722019.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:40:19.724Z,1516722019.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:20.105Z,1516722020.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:20.124Z,1516722020.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:40:20.125Z,1516722020.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:20.514Z,1516722020.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:20.529Z,1516722020.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:40:20.530Z,1516722020.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:20.918Z,1516722020.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:20.933Z,1516722020.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:40:20.934Z,1516722020.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:21.316Z,1516722021.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:21.330Z,1516722021.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:21.700Z,1516722021.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:21.722Z,1516722021.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:22.103Z,1516722022.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:22.122Z,1516722022.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:22.506Z,1516722022.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:22.525Z,1516722022.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:22.904Z,1516722022.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:22.924Z,1516722022.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:23.299Z,1516722023.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:23.332Z,1516722023.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:23.716Z,1516722023.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:23.731Z,1516722023.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:24.118Z,1516722024.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:24.134Z,1516722024.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:24.514Z,1516722024.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:24.529Z,1516722024.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:24.903Z,1516722024.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:24.929Z,1516722024.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:25.313Z,1516722025.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:25.333Z,1516722025.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:25.709Z,1516722025.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:25.725Z,1516722025.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:26.106Z,1516722026.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:26.121Z,1516722026.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:26.515Z,1516722026.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:26.530Z,1516722026.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:26.918Z,1516722026.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:26.937Z,1516722026.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:27.316Z,1516722027.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:27.331Z,1516722027.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:27.700Z,1516722027.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:27.722Z,1516722027.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:28.100Z,1516722028.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:28.122Z,1516722028.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:28.505Z,1516722028.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:28.524Z,1516722028.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:28.905Z,1516722028.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:28.920Z,1516722028.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:29.300Z,1516722029.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:29.322Z,1516722029.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:29.715Z,1516722029.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:29.730Z,1516722029.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:30.114Z,1516722030.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:30.130Z,1516722030.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:30.514Z,1516722030.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:30.529Z,1516722030.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:30.903Z,1516722030.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:30.929Z,1516722030.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:31.300Z,1516722031.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:31.322Z,1516722031.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:31.701Z,1516722031.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:31.723Z,1516722031.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:32.106Z,1516722032.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:32.128Z,1516722032.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:32.514Z,1516722032.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:32.530Z,1516722032.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:32.918Z,1516722032.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:32.933Z,1516722032.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:33.316Z,1516722033.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:33.330Z,1516722033.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:33.701Z,1516722033.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:33.723Z,1516722033.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:34.100Z,1516722034.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:34.121Z,1516722034.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:34.516Z,1516722034.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:34.530Z,1516722034.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:34.914Z,1516722034.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:34.929Z,1516722034.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:35.318Z,1516722035.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:35.337Z,1516722035.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:35.705Z,1516722035.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:35.724Z,1516722035.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:36.094Z,1516722036.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:36.122Z,1516722036.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:36.496Z,1516722036.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:36.529Z,1516722036.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:36.897Z,1516722036.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:36.930Z,1516722036.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:37.296Z,1516722037.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:37.343Z,1516722037.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:37.714Z,1516722037.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:37.738Z,1516722037.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:38.120Z,1516722038.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:38.135Z,1516722038.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:38.512Z,1516722038.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:38.544Z,1516722038.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:38.897Z,1516722038.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:38.924Z,1516722038.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:39.297Z,1516722039.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:39.336Z,1516722039.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:39.714Z,1516722039.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:39.729Z,1516722039.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:40.098Z,1516722040.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:40.134Z,1516722040.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:40.516Z,1516722040.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:40.537Z,1516722040.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:40.913Z,1516722040.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:40.949Z,1516722040.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:41.325Z,1516722041.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:41.345Z,1516722041.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:41.698Z,1516722041.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:41.735Z,1516722041.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:42.095Z,1516722042.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:42.118Z,1516722042.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:42.525Z,1516722042.525 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:42.540Z,1516722042.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:42.916Z,1516722042.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:42.951Z,1516722042.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:43.320Z,1516722043.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:43.342Z,1516722043.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:43.697Z,1516722043.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:43.726Z,1516722043.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:44.104Z,1516722044.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:44.140Z,1516722044.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:44.507Z,1516722044.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:44.545Z,1516722044.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:44.916Z,1516722044.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:44.950Z,1516722044.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:45.314Z,1516722045.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:45.343Z,1516722045.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:45.705Z,1516722045.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:45.741Z,1516722045.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:46.101Z,1516722046.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:46.121Z,1516722046.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:46.515Z,1516722046.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:46.559Z,1516722046.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:46.911Z,1516722046.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:46.926Z,1516722046.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:47.320Z,1516722047.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:47.356Z,1516722047.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:47.710Z,1516722047.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:47.725Z,1516722047.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:48.100Z,1516722048.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:48.120Z,1516722048.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:48.509Z,1516722048.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:48.529Z,1516722048.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:48.923Z,1516722048.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:48.938Z,1516722048.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:49.316Z,1516722049.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:49.331Z,1516722049.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:49.704Z,1516722049.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:49.723Z,1516722049.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:50.105Z,1516722050.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:50.120Z,1516722050.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:50.515Z,1516722050.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:50.530Z,1516722050.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:50.927Z,1516722050.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:50.942Z,1516722050.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:51.316Z,1516722051.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:51.331Z,1516722051.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:51.704Z,1516722051.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:51.724Z,1516722051.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:52.101Z,1516722052.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:52.133Z,1516722052.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:52.519Z,1516722052.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:52.534Z,1516722052.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:52.914Z,1516722052.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:52.929Z,1516722052.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:53.314Z,1516722053.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:53.329Z,1516722053.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:53.707Z,1516722053.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:53.722Z,1516722053.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:54.105Z,1516722054.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:54.131Z,1516722054.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:54.518Z,1516722054.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:54.540Z,1516722054.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:54.918Z,1516722054.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:54.933Z,1516722054.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:55.318Z,1516722055.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:55.337Z,1516722055.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:55.714Z,1516722055.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:55.729Z,1516722055.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:56.113Z,1516722056.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:56.128Z,1516722056.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:56.514Z,1516722056.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:56.530Z,1516722056.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:56.916Z,1516722056.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:56.935Z,1516722056.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:57.317Z,1516722057.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:57.340Z,1516722057.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:57.701Z,1516722057.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:57.732Z,1516722057.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:58.100Z,1516722058.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:58.137Z,1516722058.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:58.519Z,1516722058.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:58.545Z,1516722058.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:58.911Z,1516722058.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:58.942Z,1516722058.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:59.319Z,1516722059.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:59.344Z,1516722059.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:40:59.709Z,1516722059.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:40:59.724Z,1516722059.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:00.099Z,1516722060.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:00.114Z,1516722060.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:00.519Z,1516722060.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:00.544Z,1516722060.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:00.935Z,1516722060.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:00.953Z,1516722060.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:01.311Z,1516722061.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:01.326Z,1516722061.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:01.707Z,1516722061.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:01.722Z,1516722061.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:02.109Z,1516722062.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:02.124Z,1516722062.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:02.508Z,1516722062.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:02.523Z,1516722062.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:02.919Z,1516722062.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:02.954Z,1516722062.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:03.309Z,1516722063.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:03.324Z,1516722063.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:03.706Z,1516722063.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:03.726Z,1516722063.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:04.104Z,1516722064.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:04.124Z,1516722064.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:04.523Z,1516722064.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:04.553Z,1516722064.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:04.909Z,1516722064.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:04.929Z,1516722064.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:05.309Z,1516722065.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:05.324Z,1516722065.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:05.709Z,1516722065.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:05.725Z,1516722065.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:06.104Z,1516722066.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:06.123Z,1516722066.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:06.510Z,1516722066.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:06.525Z,1516722066.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:06.912Z,1516722066.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:06.933Z,1516722066.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:07.319Z,1516722067.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:07.355Z,1516722067.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:07.710Z,1516722067.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:07.725Z,1516722067.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:08.107Z,1516722068.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:08.124Z,1516722068.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:08.511Z,1516722068.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:08.526Z,1516722068.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:08.912Z,1516722068.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:08.927Z,1516722068.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:09.315Z,1516722069.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:09.331Z,1516722069.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:09.705Z,1516722069.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:09.724Z,1516722069.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:10.107Z,1516722070.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:10.122Z,1516722070.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:10.512Z,1516722070.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:10.537Z,1516722070.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:10.914Z,1516722070.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:10.933Z,1516722070.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:11.316Z,1516722071.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:11.331Z,1516722071.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:11.708Z,1516722071.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:11.724Z,1516722071.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:12.105Z,1516722072.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:12.133Z,1516722072.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:12.504Z,1516722072.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:12.526Z,1516722072.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:15.612Z,1516722075.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:15.633Z,1516722075.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:15.744Z,1516722075.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:15.776Z,1516722075.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:16.112Z,1516722076.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:16.149Z,1516722076.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:16.482Z,1516722076.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:16.534Z,1516722076.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:16.881Z,1516722076.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:16.898Z,1516722076.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:17.281Z,1516722077.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:17.301Z,1516722077.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:17.700Z,1516722077.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:17.731Z,1516722077.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:18.104Z,1516722078.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:18.137Z,1516722078.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:18.500Z,1516722078.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:18.537Z,1516722078.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:18.891Z,1516722078.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:18.929Z,1516722078.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:19.287Z,1516722079.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:19.333Z,1516722079.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:19.682Z,1516722079.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:19.706Z,1516722079.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:20.086Z,1516722080.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:20.102Z,1516722080.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:20.482Z,1516722080.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:20.505Z,1516722080.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:20.889Z,1516722080.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:20.906Z,1516722080.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:21.291Z,1516722081.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:21.330Z,1516722081.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:21.694Z,1516722081.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:21.715Z,1516722081.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:22.080Z,1516722082.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:22.107Z,1516722082.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:22.485Z,1516722082.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:22.500Z,1516722082.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:22.880Z,1516722082.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:22.913Z,1516722082.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:23.288Z,1516722083.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:23.303Z,1516722083.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:23.696Z,1516722083.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:23.714Z,1516722083.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:24.098Z,1516722084.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:24.113Z,1516722084.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:24.494Z,1516722084.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:24.509Z,1516722084.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:24.883Z,1516722084.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:24.909Z,1516722084.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:25.284Z,1516722085.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:25.309Z,1516722085.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:25.679Z,1516722085.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:25.711Z,1516722085.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:26.086Z,1516722086.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:26.104Z,1516722086.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:26.488Z,1516722086.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:26.503Z,1516722086.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:26.894Z,1516722086.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:26.914Z,1516722086.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:27.298Z,1516722087.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:27.320Z,1516722087.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:27.695Z,1516722087.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:27.710Z,1516722087.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:28.076Z,1516722088.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:28.109Z,1516722088.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:28.489Z,1516722088.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:28.504Z,1516722088.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:28.889Z,1516722088.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:28.904Z,1516722088.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:29.276Z,1516722089.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:29.311Z,1516722089.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:29.696Z,1516722089.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:29.710Z,1516722089.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:30.099Z,1516722090.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:30.118Z,1516722090.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:30.495Z,1516722090.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:30.510Z,1516722090.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:30.876Z,1516722090.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:30.912Z,1516722090.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:31.276Z,1516722091.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:31.309Z,1516722091.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:31.676Z,1516722091.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:31.709Z,1516722091.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:32.077Z,1516722092.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:32.112Z,1516722092.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:32.476Z,1516722092.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:32.502Z,1516722092.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:32.894Z,1516722092.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:32.917Z,1516722092.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:33.299Z,1516722093.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:33.316Z,1516722093.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:33.703Z,1516722093.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:33.718Z,1516722093.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:34.077Z,1516722094.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:34.102Z,1516722094.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:34.476Z,1516722094.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:34.505Z,1516722094.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:34.877Z,1516722094.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:34.909Z,1516722094.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:35.280Z,1516722095.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:35.306Z,1516722095.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:35.694Z,1516722095.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:35.721Z,1516722095.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:36.099Z,1516722096.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:36.114Z,1516722096.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:36.495Z,1516722096.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:36.514Z,1516722096.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:36.876Z,1516722096.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:36.905Z,1516722096.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:37.276Z,1516722097.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:37.302Z,1516722097.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:37.676Z,1516722097.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:37.709Z,1516722097.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:38.077Z,1516722098.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:38.116Z,1516722098.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:38.480Z,1516722098.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:38.506Z,1516722098.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:38.894Z,1516722098.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:38.917Z,1516722098.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:39.299Z,1516722099.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:39.314Z,1516722099.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:39.695Z,1516722099.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:39.710Z,1516722099.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:40.076Z,1516722100.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:40.102Z,1516722100.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:40.476Z,1516722100.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:40.512Z,1516722100.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:40.877Z,1516722100.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:40.904Z,1516722100.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:41.276Z,1516722101.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:41.309Z,1516722101.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:41.694Z,1516722101.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:41.717Z,1516722101.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:42.099Z,1516722102.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:42.114Z,1516722102.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:42.495Z,1516722102.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:42.510Z,1516722102.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:42.876Z,1516722102.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:42.912Z,1516722102.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:43.278Z,1516722103.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:43.309Z,1516722103.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:43.677Z,1516722103.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:43.703Z,1516722103.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:44.077Z,1516722104.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:44.116Z,1516722104.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:44.480Z,1516722104.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:44.507Z,1516722104.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:44.896Z,1516722104.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:44.923Z,1516722104.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:45.300Z,1516722105.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:45.315Z,1516722105.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:45.695Z,1516722105.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:45.710Z,1516722105.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:46.076Z,1516722106.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:46.109Z,1516722106.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:46.476Z,1516722106.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:46.514Z,1516722106.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:46.881Z,1516722106.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:46.908Z,1516722106.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:47.275Z,1516722107.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:47.312Z,1516722107.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:47.686Z,1516722107.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:47.713Z,1516722107.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:48.097Z,1516722108.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:48.117Z,1516722108.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:48.491Z,1516722108.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:48.513Z,1516722108.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:48.875Z,1516722108.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:48.914Z,1516722108.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:49.280Z,1516722109.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:49.306Z,1516722109.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:49.678Z,1516722109.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:49.708Z,1516722109.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:50.077Z,1516722110.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:50.110Z,1516722110.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:50.476Z,1516722110.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:50.509Z,1516722110.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:50.887Z,1516722110.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:50.925Z,1516722110.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:51.299Z,1516722111.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:51.324Z,1516722111.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:51.695Z,1516722111.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:51.719Z,1516722111.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:52.088Z,1516722112.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:52.122Z,1516722112.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:52.488Z,1516722112.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:52.528Z,1516722112.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:52.885Z,1516722112.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:52.921Z,1516722112.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:53.285Z,1516722113.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:53.300Z,1516722113.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:53.695Z,1516722113.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:53.710Z,1516722113.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:54.100Z,1516722114.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:54.130Z,1516722114.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:54.491Z,1516722114.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:54.529Z,1516722114.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:54.887Z,1516722114.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:54.902Z,1516722114.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:55.287Z,1516722115.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:55.302Z,1516722115.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:55.692Z,1516722115.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:55.707Z,1516722115.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:56.088Z,1516722116.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:56.103Z,1516722116.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:56.484Z,1516722116.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:56.508Z,1516722116.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:56.896Z,1516722116.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:56.911Z,1516722116.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:57.296Z,1516722117.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:57.316Z,1516722117.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:57.699Z,1516722117.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:57.714Z,1516722117.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:58.087Z,1516722118.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:58.102Z,1516722118.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:58.480Z,1516722118.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:58.523Z,1516722118.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:58.892Z,1516722118.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:58.907Z,1516722118.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:59.276Z,1516722119.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:59.309Z,1516722119.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:41:59.697Z,1516722119.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:41:59.734Z,1516722119.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:00.097Z,1516722120.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:00.125Z,1516722120.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:00.508Z,1516722120.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:00.523Z,1516722120.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:00.888Z,1516722120.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:00.923Z,1516722120.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:01.284Z,1516722121.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:01.321Z,1516722121.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:01.712Z,1516722121.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:01.733Z,1516722121.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:02.082Z,1516722122.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:02.120Z,1516722122.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:02.477Z,1516722122.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:02.496Z,1516722122.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:02.891Z,1516722122.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:02.926Z,1516722122.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:03.295Z,1516722123.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:03.332Z,1516722123.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:03.696Z,1516722123.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:03.731Z,1516722123.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:04.082Z,1516722124.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:04.101Z,1516722124.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:04.481Z,1516722124.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:04.511Z,1516722124.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:04.881Z,1516722124.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:04.904Z,1516722124.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:05.280Z,1516722125.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:05.302Z,1516722125.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:05.696Z,1516722125.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:05.711Z,1516722125.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:06.094Z,1516722126.094 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:06.109Z,1516722126.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:06.494Z,1516722126.494 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:06.514Z,1516722126.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:06.886Z,1516722126.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:06.908Z,1516722126.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:07.274Z,1516722127.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:07.301Z,1516722127.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:07.680Z,1516722127.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:07.702Z,1516722127.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:08.077Z,1516722128.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:08.114Z,1516722128.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:08.476Z,1516722128.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:08.513Z,1516722128.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:08.899Z,1516722128.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:08.914Z,1516722128.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:09.299Z,1516722129.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:09.320Z,1516722129.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:09.695Z,1516722129.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:09.710Z,1516722129.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:10.075Z,1516722130.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:10.109Z,1516722130.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:10.475Z,1516722130.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:10.511Z,1516722130.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:10.877Z,1516722130.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:10.909Z,1516722130.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:11.276Z,1516722131.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:11.302Z,1516722131.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:11.693Z,1516722131.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:11.713Z,1516722131.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:12.093Z,1516722132.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:12.120Z,1516722132.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:12.499Z,1516722132.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:12.514Z,1516722132.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:12.877Z,1516722132.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:12.909Z,1516722132.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:15.977Z,1516722135.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:16.005Z,1516722136.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:16.109Z,1516722136.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:16.157Z,1516722136.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:16.463Z,1516722136.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:16.478Z,1516722136.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:16.875Z,1516722136.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:16.908Z,1516722136.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:17.264Z,1516722137.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:17.279Z,1516722137.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:17.656Z,1516722137.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:17.677Z,1516722137.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:18.058Z,1516722138.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:18.073Z,1516722138.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:18.456Z,1516722138.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:18.471Z,1516722138.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:18.862Z,1516722138.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:18.881Z,1516722138.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:19.263Z,1516722139.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:19.278Z,1516722139.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:19.664Z,1516722139.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:19.679Z,1516722139.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:20.056Z,1516722140.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:20.071Z,1516722140.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:20.457Z,1516722140.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:20.472Z,1516722140.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:20.857Z,1516722140.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:20.877Z,1516722140.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:21.256Z,1516722141.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:21.271Z,1516722141.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:21.663Z,1516722141.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:21.678Z,1516722141.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:22.067Z,1516722142.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:22.082Z,1516722142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:22.462Z,1516722142.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:22.485Z,1516722142.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:22.861Z,1516722142.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:22.876Z,1516722142.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:23.260Z,1516722143.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:23.281Z,1516722143.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:23.662Z,1516722143.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:23.685Z,1516722143.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:24.063Z,1516722144.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:24.078Z,1516722144.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:24.464Z,1516722144.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:24.479Z,1516722144.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:24.856Z,1516722144.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:24.875Z,1516722144.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:25.257Z,1516722145.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:25.272Z,1516722145.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:25.662Z,1516722145.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:25.685Z,1516722145.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:26.063Z,1516722146.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:26.078Z,1516722146.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:26.463Z,1516722146.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:26.484Z,1516722146.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:26.861Z,1516722146.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:26.876Z,1516722146.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:27.256Z,1516722147.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:27.271Z,1516722147.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:27.663Z,1516722147.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:27.679Z,1516722147.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:28.063Z,1516722148.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:28.078Z,1516722148.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:28.462Z,1516722148.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:28.477Z,1516722148.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:28.858Z,1516722148.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:28.873Z,1516722148.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:29.262Z,1516722149.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:29.277Z,1516722149.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:29.663Z,1516722149.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:29.679Z,1516722149.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:30.064Z,1516722150.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:30.084Z,1516722150.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:30.464Z,1516722150.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:30.479Z,1516722150.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:30.863Z,1516722150.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:30.878Z,1516722150.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:31.259Z,1516722151.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:31.274Z,1516722151.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:31.664Z,1516722151.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:31.679Z,1516722151.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:32.064Z,1516722152.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:32.085Z,1516722152.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:32.468Z,1516722152.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:32.488Z,1516722152.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:32.863Z,1516722152.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:32.879Z,1516722152.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:33.256Z,1516722153.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:33.276Z,1516722153.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:33.668Z,1516722153.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:33.683Z,1516722153.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:34.066Z,1516722154.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:34.081Z,1516722154.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:34.468Z,1516722154.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:34.483Z,1516722154.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:34.859Z,1516722154.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:34.885Z,1516722154.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:35.254Z,1516722155.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:35.277Z,1516722155.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:35.667Z,1516722155.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:35.688Z,1516722155.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:36.067Z,1516722156.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:36.082Z,1516722156.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:36.467Z,1516722156.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:36.482Z,1516722156.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:36.853Z,1516722156.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:36.877Z,1516722156.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:37.256Z,1516722157.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:37.281Z,1516722157.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:37.668Z,1516722157.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:37.684Z,1516722157.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:38.066Z,1516722158.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:38.081Z,1516722158.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:38.466Z,1516722158.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:38.482Z,1516722158.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:38.857Z,1516722158.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:38.872Z,1516722158.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:39.252Z,1516722159.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:39.275Z,1516722159.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:39.666Z,1516722159.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:39.689Z,1516722159.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:40.067Z,1516722160.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:40.082Z,1516722160.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:40.467Z,1516722160.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:40.482Z,1516722160.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:40.865Z,1516722160.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:40.879Z,1516722160.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:41.261Z,1516722161.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:41.276Z,1516722161.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:41.666Z,1516722161.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:41.681Z,1516722161.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:42.066Z,1516722162.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:42.081Z,1516722162.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:42.467Z,1516722162.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:42.482Z,1516722162.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:42.853Z,1516722162.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:42.875Z,1516722162.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:43.257Z,1516722163.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:43.271Z,1516722163.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:43.667Z,1516722163.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:43.682Z,1516722163.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:44.066Z,1516722164.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:44.085Z,1516722164.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:44.466Z,1516722164.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:44.481Z,1516722164.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:44.852Z,1516722164.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:44.879Z,1516722164.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:45.252Z,1516722165.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:45.275Z,1516722165.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:45.668Z,1516722165.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:45.682Z,1516722165.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:46.066Z,1516722166.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:46.082Z,1516722166.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:46.467Z,1516722166.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:46.482Z,1516722166.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:46.857Z,1516722166.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:46.893Z,1516722166.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:47.260Z,1516722167.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:47.279Z,1516722167.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:47.664Z,1516722167.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:47.685Z,1516722167.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:48.070Z,1516722168.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:48.089Z,1516722168.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:48.464Z,1516722168.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:48.485Z,1516722168.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:48.849Z,1516722168.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:48.881Z,1516722168.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:48.883Z,1516722168.883 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:48.884Z,1516722168.884 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 248 2018-01-23T15:42:48.884Z,1516722168.884 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:42:48.896Z,1516722168.896 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:42:49.248Z,1516722169.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:49.284Z,1516722169.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:49.296Z,1516722169.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:42:49.296Z,1516722169.296 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 248 2018-01-23T15:42:49.664Z,1516722169.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:49.687Z,1516722169.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:49.689Z,1516722169.689 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:42:49.689Z,1516722169.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:42:49.689Z,1516722169.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:42:50.071Z,1516722170.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:50.086Z,1516722170.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:50.462Z,1516722170.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:50.489Z,1516722170.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:50.849Z,1516722170.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:50.875Z,1516722170.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:51.249Z,1516722171.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:51.281Z,1516722171.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:51.649Z,1516722171.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:51.688Z,1516722171.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:52.064Z,1516722172.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:52.086Z,1516722172.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:52.471Z,1516722172.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:52.486Z,1516722172.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:52.862Z,1516722172.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:52.893Z,1516722172.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:53.248Z,1516722173.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:53.275Z,1516722173.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:53.649Z,1516722173.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:53.681Z,1516722173.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:54.049Z,1516722174.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:54.088Z,1516722174.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:54.448Z,1516722174.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:54.474Z,1516722174.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:54.866Z,1516722174.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:54.886Z,1516722174.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:55.272Z,1516722175.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:55.287Z,1516722175.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:55.664Z,1516722175.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:55.687Z,1516722175.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:56.048Z,1516722176.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:56.085Z,1516722176.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:56.448Z,1516722176.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:56.486Z,1516722176.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:56.846Z,1516722176.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:56.861Z,1516722176.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:57.249Z,1516722177.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:57.264Z,1516722177.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:57.649Z,1516722177.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:57.663Z,1516722177.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:58.063Z,1516722178.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:58.099Z,1516722178.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:58.475Z,1516722178.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:58.505Z,1516722178.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:58.871Z,1516722178.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:58.897Z,1516722178.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:59.256Z,1516722179.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:59.277Z,1516722179.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:42:59.655Z,1516722179.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:42:59.677Z,1516722179.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:00.058Z,1516722180.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:00.073Z,1516722180.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:00.454Z,1516722180.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:00.473Z,1516722180.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:00.867Z,1516722180.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:00.882Z,1516722180.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:01.263Z,1516722181.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:01.278Z,1516722181.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:01.660Z,1516722181.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:01.675Z,1516722181.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:02.056Z,1516722182.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:02.070Z,1516722182.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:02.071Z,1516722182.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 248 2018-01-23T15:43:02.071Z,1516722182.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:43:02.073Z,1516722182.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:02.073Z,1516722182.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 248 2018-01-23T15:43:02.073Z,1516722182.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:43:02.085Z,1516722182.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:43:02.086Z,1516722182.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:43:02.457Z,1516722182.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:02.482Z,1516722182.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:43:02.482Z,1516722182.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 248 2018-01-23T15:43:02.483Z,1516722182.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:43:02.483Z,1516722182.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 248 2018-01-23T15:43:02.852Z,1516722182.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:02.882Z,1516722182.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:43:02.882Z,1516722182.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:43:02.883Z,1516722182.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:43:02.883Z,1516722182.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:43:02.883Z,1516722182.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:43:02.884Z,1516722182.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:43:03.253Z,1516722183.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:03.280Z,1516722183.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:43:03.281Z,1516722183.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:03.661Z,1516722183.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:03.680Z,1516722183.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:43:03.681Z,1516722183.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:04.066Z,1516722184.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:04.081Z,1516722184.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:43:04.082Z,1516722184.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:04.470Z,1516722184.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:04.485Z,1516722184.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:43:04.486Z,1516722184.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:04.868Z,1516722184.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:04.882Z,1516722184.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:43:04.883Z,1516722184.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:05.252Z,1516722185.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:05.278Z,1516722185.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:43:05.284Z,1516722185.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:05.649Z,1516722185.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:05.674Z,1516722185.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:43:05.675Z,1516722185.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:06.049Z,1516722186.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:06.088Z,1516722186.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:43:06.089Z,1516722186.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:06.448Z,1516722186.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:06.474Z,1516722186.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:43:06.476Z,1516722186.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:06.864Z,1516722186.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:06.894Z,1516722186.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:43:06.895Z,1516722186.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:07.272Z,1516722187.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:07.286Z,1516722187.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:43:07.287Z,1516722187.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:07.668Z,1516722187.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:07.682Z,1516722187.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:43:07.683Z,1516722187.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:08.049Z,1516722188.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:08.081Z,1516722188.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:43:08.082Z,1516722188.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:08.449Z,1516722188.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:08.482Z,1516722188.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:43:08.483Z,1516722188.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:08.849Z,1516722188.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:08.884Z,1516722188.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:43:08.885Z,1516722188.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:09.249Z,1516722189.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:09.292Z,1516722189.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:43:09.293Z,1516722189.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:09.653Z,1516722189.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:09.686Z,1516722189.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:43:09.687Z,1516722189.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:10.060Z,1516722190.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:10.092Z,1516722190.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:43:10.093Z,1516722190.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:10.480Z,1516722190.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:10.495Z,1516722190.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:43:10.496Z,1516722190.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:10.859Z,1516722190.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:10.896Z,1516722190.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:43:10.897Z,1516722190.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:11.250Z,1516722191.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:11.277Z,1516722191.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:43:11.278Z,1516722191.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:11.649Z,1516722191.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:11.664Z,1516722191.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:43:11.665Z,1516722191.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:12.050Z,1516722192.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:12.064Z,1516722192.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:43:12.065Z,1516722192.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:12.451Z,1516722192.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:12.466Z,1516722192.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:43:12.467Z,1516722192.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:12.871Z,1516722192.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:12.896Z,1516722192.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:43:12.897Z,1516722192.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:13.271Z,1516722193.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:13.298Z,1516722193.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:43:13.299Z,1516722193.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:16.432Z,1516722196.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:16.447Z,1516722196.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:43:16.448Z,1516722196.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:16.559Z,1516722196.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:16.596Z,1516722196.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T15:43:16.597Z,1516722196.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:16.901Z,1516722196.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:16.924Z,1516722196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T15:43:16.925Z,1516722196.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:17.309Z,1516722197.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:17.323Z,1516722197.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T15:43:17.324Z,1516722197.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:17.676Z,1516722197.676 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T15:43:17.676Z,1516722197.676 [NAL9602] Data Fault, FailCount= 3 2018-01-23T15:43:17.676Z,1516722197.676 [NAL9602](ERROR): Data Fault 2018-01-23T15:43:17.696Z,1516722197.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:17.719Z,1516722197.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:43:17.720Z,1516722197.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:17.755Z,1516722197.755 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T15:43:18.076Z,1516722198.076 [NAL9602](INFO): Powering down 2018-01-23T15:43:18.095Z,1516722198.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:18.129Z,1516722198.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T15:43:18.130Z,1516722198.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:18.493Z,1516722198.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:18.522Z,1516722198.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T15:43:18.523Z,1516722198.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:18.892Z,1516722198.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:18.925Z,1516722198.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T15:43:18.926Z,1516722198.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:18.956Z,1516722198.956 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T15:43:18.956Z,1516722198.956 [NAL9602] No Fault, FailCount= 3 2018-01-23T15:43:19.292Z,1516722199.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:19.327Z,1516722199.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:43:19.328Z,1516722199.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:19.696Z,1516722199.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:19.739Z,1516722199.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T15:43:19.740Z,1516722199.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:20.096Z,1516722200.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:20.128Z,1516722200.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T15:43:20.129Z,1516722200.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:20.492Z,1516722200.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:20.513Z,1516722200.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:43:20.514Z,1516722200.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:20.900Z,1516722200.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:20.914Z,1516722200.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:43:20.916Z,1516722200.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:21.296Z,1516722201.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:21.311Z,1516722201.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:43:21.312Z,1516722201.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:21.697Z,1516722201.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:21.720Z,1516722201.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:43:21.721Z,1516722201.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:22.098Z,1516722202.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:22.113Z,1516722202.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:22.498Z,1516722202.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:22.513Z,1516722202.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:22.896Z,1516722202.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:22.923Z,1516722202.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:23.300Z,1516722203.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:23.315Z,1516722203.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:23.700Z,1516722203.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:23.715Z,1516722203.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:24.098Z,1516722204.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:24.118Z,1516722204.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:24.500Z,1516722204.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:24.515Z,1516722204.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:24.889Z,1516722204.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:24.917Z,1516722204.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:25.292Z,1516722205.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:25.324Z,1516722205.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:25.692Z,1516722205.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:25.719Z,1516722205.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:26.089Z,1516722206.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:26.125Z,1516722206.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:26.495Z,1516722206.495 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:26.522Z,1516722206.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:26.892Z,1516722206.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:26.927Z,1516722206.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:27.296Z,1516722207.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:27.322Z,1516722207.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:27.692Z,1516722207.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:27.718Z,1516722207.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:28.092Z,1516722208.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:28.127Z,1516722208.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:28.489Z,1516722208.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:28.529Z,1516722208.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:28.895Z,1516722208.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:28.921Z,1516722208.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:29.292Z,1516722209.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:29.318Z,1516722209.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:29.696Z,1516722209.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:29.722Z,1516722209.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:30.092Z,1516722210.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:30.119Z,1516722210.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:30.492Z,1516722210.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:30.527Z,1516722210.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:30.889Z,1516722210.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:30.913Z,1516722210.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:31.291Z,1516722211.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:31.322Z,1516722211.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:31.692Z,1516722211.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:31.729Z,1516722211.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:32.089Z,1516722212.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:32.105Z,1516722212.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:32.496Z,1516722212.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:32.533Z,1516722212.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:32.892Z,1516722212.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:32.937Z,1516722212.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:33.296Z,1516722213.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:33.327Z,1516722213.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:33.692Z,1516722213.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:33.709Z,1516722213.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:34.100Z,1516722214.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:34.115Z,1516722214.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:34.500Z,1516722214.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:34.515Z,1516722214.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:34.897Z,1516722214.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:34.917Z,1516722214.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:35.297Z,1516722215.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:35.312Z,1516722215.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:35.701Z,1516722215.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:35.716Z,1516722215.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:36.098Z,1516722216.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:36.117Z,1516722216.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:36.496Z,1516722216.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:36.524Z,1516722216.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:36.896Z,1516722216.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:36.911Z,1516722216.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:37.297Z,1516722217.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:37.317Z,1516722217.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:37.696Z,1516722217.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:37.723Z,1516722217.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:38.096Z,1516722218.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:38.111Z,1516722218.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:38.499Z,1516722218.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:38.514Z,1516722218.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:38.899Z,1516722218.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:38.913Z,1516722218.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:39.297Z,1516722219.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:39.312Z,1516722219.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:39.702Z,1516722219.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:39.721Z,1516722219.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:40.096Z,1516722220.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:40.123Z,1516722220.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:40.497Z,1516722220.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:40.512Z,1516722220.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:40.899Z,1516722220.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:40.914Z,1516722220.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:41.296Z,1516722221.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:41.322Z,1516722221.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:41.701Z,1516722221.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:41.716Z,1516722221.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:42.097Z,1516722222.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:42.120Z,1516722222.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:42.501Z,1516722222.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:42.516Z,1516722222.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:42.897Z,1516722222.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:42.913Z,1516722222.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:43.296Z,1516722223.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:43.323Z,1516722223.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:43.700Z,1516722223.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:43.715Z,1516722223.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:44.100Z,1516722224.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:44.115Z,1516722224.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:44.499Z,1516722224.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:44.521Z,1516722224.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:44.900Z,1516722224.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:44.915Z,1516722224.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:45.303Z,1516722225.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:45.318Z,1516722225.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:45.698Z,1516722225.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:45.722Z,1516722225.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:46.092Z,1516722226.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:46.119Z,1516722226.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:46.489Z,1516722226.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:46.525Z,1516722226.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:46.896Z,1516722226.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:46.922Z,1516722226.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:47.292Z,1516722227.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:47.328Z,1516722227.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:47.696Z,1516722227.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:47.722Z,1516722227.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:48.092Z,1516722228.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:48.129Z,1516722228.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:48.480Z,1516722228.480 [NAL9602](INFO): Powering up NAL9602 2018-01-23T15:43:48.497Z,1516722228.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:48.528Z,1516722228.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:48.889Z,1516722228.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:48.913Z,1516722228.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:49.292Z,1516722229.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:49.329Z,1516722229.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:49.696Z,1516722229.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:49.730Z,1516722229.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:50.100Z,1516722230.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:50.127Z,1516722230.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:50.493Z,1516722230.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:50.529Z,1516722230.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:50.893Z,1516722230.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:50.929Z,1516722230.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:51.297Z,1516722231.297 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:51.329Z,1516722231.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:51.705Z,1516722231.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:51.732Z,1516722231.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:52.093Z,1516722232.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:52.129Z,1516722232.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:52.489Z,1516722232.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:52.505Z,1516722232.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:52.891Z,1516722232.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:52.907Z,1516722232.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:53.292Z,1516722233.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:53.309Z,1516722233.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:53.700Z,1516722233.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:53.716Z,1516722233.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:54.100Z,1516722234.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:54.117Z,1516722234.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:54.501Z,1516722234.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:54.517Z,1516722234.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:54.898Z,1516722234.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:54.913Z,1516722234.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:55.308Z,1516722235.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:55.345Z,1516722235.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:55.706Z,1516722235.706 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:55.720Z,1516722235.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:56.100Z,1516722236.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:56.115Z,1516722236.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:56.501Z,1516722236.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:56.517Z,1516722236.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:56.901Z,1516722236.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:56.917Z,1516722236.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:57.303Z,1516722237.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:57.318Z,1516722237.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:57.697Z,1516722237.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:43:57.724Z,1516722237.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:58.119Z,1516722238.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:58.516Z,1516722238.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:58.921Z,1516722238.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:59.323Z,1516722239.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:43:59.680Z,1516722239.680 [NAL9602](INFO): NAL9602 initialized 2018-01-23T15:43:59.739Z,1516722239.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:00.116Z,1516722240.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:00.527Z,1516722240.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:00.927Z,1516722240.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:01.327Z,1516722241.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:01.701Z,1516722241.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:01.716Z,1516722241.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:02.096Z,1516722242.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:02.118Z,1516722242.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:02.497Z,1516722242.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:02.519Z,1516722242.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:02.901Z,1516722242.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:02.916Z,1516722242.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:03.311Z,1516722243.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:03.326Z,1516722243.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:03.708Z,1516722243.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:03.729Z,1516722243.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:04.110Z,1516722244.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:04.132Z,1516722244.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:04.497Z,1516722244.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:04.516Z,1516722244.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:04.896Z,1516722244.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:04.923Z,1516722244.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:05.300Z,1516722245.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:05.325Z,1516722245.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:05.691Z,1516722245.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:05.725Z,1516722245.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:06.096Z,1516722246.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:06.119Z,1516722246.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:06.512Z,1516722246.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:06.527Z,1516722246.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:06.914Z,1516722246.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:06.929Z,1516722246.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:07.311Z,1516722247.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:07.326Z,1516722247.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:07.699Z,1516722247.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:07.720Z,1516722247.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:08.090Z,1516722248.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:08.122Z,1516722248.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:08.505Z,1516722248.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:08.521Z,1516722248.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:08.892Z,1516722248.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:08.928Z,1516722248.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:09.312Z,1516722249.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:09.327Z,1516722249.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:09.715Z,1516722249.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:09.730Z,1516722249.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:10.109Z,1516722250.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:10.135Z,1516722250.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:10.490Z,1516722250.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:10.525Z,1516722250.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:10.908Z,1516722250.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:10.929Z,1516722250.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:11.293Z,1516722251.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:11.320Z,1516722251.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:11.693Z,1516722251.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:11.720Z,1516722251.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:11.723Z,1516722251.723 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:39:11.4Z 2018-01-23T15:44:11.723Z,1516722251.723 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:44:11.723Z,1516722251.723 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:44:12.091Z,1516722252.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:12.129Z,1516722252.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:12.631Z,1516722252.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:12.646Z,1516722252.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:12.915Z,1516722252.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:12.937Z,1516722252.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:16.012Z,1516722256.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:16.037Z,1516722256.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:16.115Z,1516722256.115 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0292.lzma 2018-01-23T15:44:16.144Z,1516722256.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:16.184Z,1516722256.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:16.488Z,1516722256.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:16.503Z,1516722256.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:16.862Z,1516722256.862 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0292.lzma.bak 2018-01-23T15:44:16.862Z,1516722256.862 [DataOverHttps](INFO): SBD MOMSN=7755805 2018-01-23T15:44:16.901Z,1516722256.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:16.916Z,1516722256.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:17.539Z,1516722257.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:17.555Z,1516722257.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:17.684Z,1516722257.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:17.717Z,1516722257.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:20.855Z,1516722260.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:20.871Z,1516722260.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:20.994Z,1516722260.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:21.034Z,1516722261.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:21.356Z,1516722261.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:21.371Z,1516722261.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:21.754Z,1516722261.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:21.768Z,1516722261.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:22.150Z,1516722262.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:22.165Z,1516722262.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:22.547Z,1516722262.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:22.568Z,1516722262.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:25.644Z,1516722265.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:25.665Z,1516722265.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:25.752Z,1516722265.752 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0293.lzma 2018-01-23T15:44:25.796Z,1516722265.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:25.829Z,1516722265.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:26.151Z,1516722266.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:26.166Z,1516722266.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:26.512Z,1516722266.512 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0293.lzma.bak 2018-01-23T15:44:26.513Z,1516722266.513 [DataOverHttps](INFO): SBD MOMSN=7755807 2018-01-23T15:44:26.562Z,1516722266.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:26.577Z,1516722266.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:27.172Z,1516722267.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:27.205Z,1516722267.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:27.210Z,1516722267.210 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:44:27.210Z,1516722267.210 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:44:27.211Z,1516722267.211 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:44:27.325Z,1516722267.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:27.361Z,1516722267.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:30.422Z,1516722270.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:30.454Z,1516722270.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:30.552Z,1516722270.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:30.585Z,1516722270.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:30.931Z,1516722270.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:30.957Z,1516722270.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:31.350Z,1516722271.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:31.365Z,1516722271.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:31.732Z,1516722271.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:31.757Z,1516722271.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:32.125Z,1516722272.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:32.161Z,1516722272.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:32.522Z,1516722272.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:32.537Z,1516722272.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:32.918Z,1516722272.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:32.934Z,1516722272.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:32.959Z,1516722272.959 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:44:33.328Z,1516722273.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:33.343Z,1516722273.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:33.728Z,1516722273.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:33.742Z,1516722273.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:34.124Z,1516722274.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:34.139Z,1516722274.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:34.520Z,1516722274.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:34.536Z,1516722274.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:34.922Z,1516722274.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:34.937Z,1516722274.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:35.318Z,1516722275.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:35.342Z,1516722275.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:35.727Z,1516722275.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:35.742Z,1516722275.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:36.124Z,1516722276.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:36.138Z,1516722276.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:36.528Z,1516722276.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:36.549Z,1516722276.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:36.935Z,1516722276.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:36.951Z,1516722276.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:37.333Z,1516722277.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:37.349Z,1516722277.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:37.717Z,1516722277.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:37.749Z,1516722277.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:38.117Z,1516722278.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:38.141Z,1516722278.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:38.524Z,1516722278.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:38.540Z,1516722278.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:38.916Z,1516722278.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:38.945Z,1516722278.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:39.332Z,1516722279.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:39.353Z,1516722279.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:39.738Z,1516722279.738 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:39.754Z,1516722279.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:40.131Z,1516722280.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:40.152Z,1516722280.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:40.528Z,1516722280.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:40.550Z,1516722280.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:40.913Z,1516722280.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:40.952Z,1516722280.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:41.313Z,1516722281.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:41.350Z,1516722281.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:41.717Z,1516722281.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:41.744Z,1516722281.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:42.111Z,1516722282.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:42.146Z,1516722282.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:42.530Z,1516722282.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:42.559Z,1516722282.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:42.939Z,1516722282.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:42.961Z,1516722282.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:43.331Z,1516722283.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:43.362Z,1516722283.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:43.712Z,1516722283.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:43.733Z,1516722283.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:44.120Z,1516722284.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:44.137Z,1516722284.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:44.517Z,1516722284.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:44.532Z,1516722284.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:44.917Z,1516722284.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:44.940Z,1516722284.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:45.326Z,1516722285.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:45.341Z,1516722285.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:45.726Z,1516722285.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:45.749Z,1516722285.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:46.126Z,1516722286.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:46.141Z,1516722286.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:46.517Z,1516722286.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:46.544Z,1516722286.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:46.925Z,1516722286.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:46.940Z,1516722286.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:47.323Z,1516722287.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:47.338Z,1516722287.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:47.717Z,1516722287.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:47.744Z,1516722287.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:48.125Z,1516722288.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:48.140Z,1516722288.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:48.530Z,1516722288.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:48.546Z,1516722288.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:48.934Z,1516722288.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:48.950Z,1516722288.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:49.332Z,1516722289.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:49.347Z,1516722289.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:49.716Z,1516722289.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:49.739Z,1516722289.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:50.115Z,1516722290.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:50.148Z,1516722290.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:50.530Z,1516722290.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:50.545Z,1516722290.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:50.910Z,1516722290.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:50.942Z,1516722290.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:51.335Z,1516722291.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:51.350Z,1516722291.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:51.736Z,1516722291.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:51.751Z,1516722291.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:52.128Z,1516722292.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:52.160Z,1516722292.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:52.524Z,1516722292.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:52.543Z,1516722292.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:52.912Z,1516722292.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:52.941Z,1516722292.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:53.324Z,1516722293.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:53.343Z,1516722293.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:53.713Z,1516722293.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:53.745Z,1516722293.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:54.111Z,1516722294.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:54.140Z,1516722294.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:54.528Z,1516722294.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:54.559Z,1516722294.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:54.935Z,1516722294.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:54.951Z,1516722294.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:55.329Z,1516722295.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:55.348Z,1516722295.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:55.712Z,1516722295.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:55.749Z,1516722295.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:56.112Z,1516722296.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:56.149Z,1516722296.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:56.516Z,1516722296.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:56.562Z,1516722296.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:56.916Z,1516722296.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:56.945Z,1516722296.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:57.327Z,1516722297.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:57.421Z,1516722297.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:57.731Z,1516722297.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:57.746Z,1516722297.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:58.126Z,1516722298.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:58.141Z,1516722298.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:58.512Z,1516722298.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:58.533Z,1516722298.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:58.914Z,1516722298.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:58.929Z,1516722298.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:59.310Z,1516722299.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:59.325Z,1516722299.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:44:59.714Z,1516722299.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:44:59.729Z,1516722299.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:00.114Z,1516722300.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:00.129Z,1516722300.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:00.527Z,1516722300.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:00.543Z,1516722300.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:00.927Z,1516722300.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:00.942Z,1516722300.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:01.324Z,1516722301.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:01.368Z,1516722301.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:01.716Z,1516722301.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:01.748Z,1516722301.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:02.116Z,1516722302.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:02.139Z,1516722302.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:02.522Z,1516722302.522 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:02.541Z,1516722302.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:02.910Z,1516722302.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:02.946Z,1516722302.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:03.331Z,1516722303.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:03.353Z,1516722303.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:03.736Z,1516722303.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:03.753Z,1516722303.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:04.128Z,1516722304.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:04.159Z,1516722304.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:04.512Z,1516722304.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:04.538Z,1516722304.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:04.912Z,1516722304.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:04.941Z,1516722304.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:05.312Z,1516722305.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:05.338Z,1516722305.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:05.713Z,1516722305.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:05.745Z,1516722305.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:06.112Z,1516722306.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:06.149Z,1516722306.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:06.530Z,1516722306.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:06.554Z,1516722306.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:06.934Z,1516722306.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:06.953Z,1516722306.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:07.322Z,1516722307.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:07.350Z,1516722307.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:07.712Z,1516722307.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:07.745Z,1516722307.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:08.111Z,1516722308.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:08.145Z,1516722308.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:08.517Z,1516722308.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:08.551Z,1516722308.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:08.910Z,1516722308.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:08.925Z,1516722308.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:09.340Z,1516722309.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:09.356Z,1516722309.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:09.727Z,1516722309.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:09.764Z,1516722309.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:10.127Z,1516722310.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:10.163Z,1516722310.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:10.513Z,1516722310.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:10.549Z,1516722310.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:10.913Z,1516722310.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:10.928Z,1516722310.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:11.314Z,1516722311.314 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:11.330Z,1516722311.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:11.723Z,1516722311.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:11.765Z,1516722311.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:12.122Z,1516722312.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:12.137Z,1516722312.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:12.523Z,1516722312.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:12.545Z,1516722312.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:12.940Z,1516722312.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:12.970Z,1516722312.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:13.340Z,1516722313.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:13.372Z,1516722313.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:13.723Z,1516722313.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:13.738Z,1516722313.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:14.118Z,1516722314.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:14.137Z,1516722314.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:14.523Z,1516722314.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:14.537Z,1516722314.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:14.924Z,1516722314.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:14.942Z,1516722314.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:15.331Z,1516722315.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:15.346Z,1516722315.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:15.731Z,1516722315.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:15.746Z,1516722315.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:16.126Z,1516722316.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:16.141Z,1516722316.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:16.530Z,1516722316.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:16.545Z,1516722316.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:16.926Z,1516722316.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:16.949Z,1516722316.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:17.326Z,1516722317.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:17.343Z,1516722317.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:17.714Z,1516722317.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:17.750Z,1516722317.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:18.130Z,1516722318.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:18.145Z,1516722318.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:18.532Z,1516722318.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:18.560Z,1516722318.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:18.935Z,1516722318.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:18.952Z,1516722318.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:19.322Z,1516722319.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:19.360Z,1516722319.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:19.720Z,1516722319.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:19.748Z,1516722319.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:20.120Z,1516722320.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:20.146Z,1516722320.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:20.514Z,1516722320.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:20.546Z,1516722320.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:20.910Z,1516722320.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:20.933Z,1516722320.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:21.335Z,1516722321.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:21.354Z,1516722321.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:21.743Z,1516722321.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:21.759Z,1516722321.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:22.123Z,1516722322.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:22.161Z,1516722322.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:22.520Z,1516722322.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:22.556Z,1516722322.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:22.925Z,1516722322.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:22.957Z,1516722322.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:23.324Z,1516722323.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:23.356Z,1516722323.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:23.729Z,1516722323.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:23.754Z,1516722323.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:24.117Z,1516722324.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:24.159Z,1516722324.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:24.524Z,1516722324.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:24.552Z,1516722324.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:24.950Z,1516722324.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:24.965Z,1516722324.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:25.343Z,1516722325.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:25.364Z,1516722325.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:25.720Z,1516722325.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:25.756Z,1516722325.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:26.126Z,1516722326.126 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:26.155Z,1516722326.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:26.521Z,1516722326.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:26.555Z,1516722326.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:26.919Z,1516722326.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:26.934Z,1516722326.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:27.331Z,1516722327.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:27.359Z,1516722327.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:27.750Z,1516722327.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:27.772Z,1516722327.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:30.859Z,1516722330.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:30.874Z,1516722330.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:30.973Z,1516722330.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:31.009Z,1516722331.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:31.340Z,1516722331.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:31.373Z,1516722331.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:31.737Z,1516722331.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:31.769Z,1516722331.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:32.133Z,1516722332.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:32.169Z,1516722332.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:32.561Z,1516722332.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:32.576Z,1516722332.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:32.961Z,1516722332.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:32.976Z,1516722332.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:33.357Z,1516722333.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:33.372Z,1516722333.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:33.732Z,1516722333.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:33.770Z,1516722333.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:34.135Z,1516722334.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:34.171Z,1516722334.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:34.541Z,1516722334.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:34.569Z,1516722334.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:34.931Z,1516722334.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:34.973Z,1516722334.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:35.348Z,1516722335.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:35.376Z,1516722335.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:35.748Z,1516722335.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:35.783Z,1516722335.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:36.164Z,1516722336.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:36.179Z,1516722336.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:36.549Z,1516722336.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:36.575Z,1516722336.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:36.930Z,1516722336.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:36.945Z,1516722336.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:37.335Z,1516722337.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:37.353Z,1516722337.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:37.741Z,1516722337.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:37.757Z,1516722337.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:38.132Z,1516722338.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:38.153Z,1516722338.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:38.552Z,1516722338.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:38.583Z,1516722338.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:38.955Z,1516722338.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:38.988Z,1516722338.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:39.352Z,1516722339.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:39.383Z,1516722339.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:39.745Z,1516722339.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:39.761Z,1516722339.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:40.145Z,1516722340.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:40.161Z,1516722340.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:40.544Z,1516722340.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:40.565Z,1516722340.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:40.941Z,1516722340.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:40.968Z,1516722340.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:41.351Z,1516722341.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:41.367Z,1516722341.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:41.756Z,1516722341.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:41.771Z,1516722341.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:42.154Z,1516722342.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:42.169Z,1516722342.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:42.543Z,1516722342.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:42.559Z,1516722342.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:42.942Z,1516722342.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:42.965Z,1516722342.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:43.350Z,1516722343.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:43.365Z,1516722343.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:43.744Z,1516722343.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:43.760Z,1516722343.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:44.138Z,1516722344.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:44.160Z,1516722344.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:44.550Z,1516722344.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:44.565Z,1516722344.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:44.952Z,1516722344.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:44.966Z,1516722344.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:45.354Z,1516722345.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:45.369Z,1516722345.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:45.744Z,1516722345.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:45.759Z,1516722345.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:46.143Z,1516722346.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:46.159Z,1516722346.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:46.548Z,1516722346.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:46.563Z,1516722346.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:46.936Z,1516722346.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:46.966Z,1516722346.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:47.358Z,1516722347.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:47.373Z,1516722347.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:47.755Z,1516722347.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:47.770Z,1516722347.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:48.156Z,1516722348.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:48.171Z,1516722348.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:48.539Z,1516722348.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:48.566Z,1516722348.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:48.939Z,1516722348.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:48.962Z,1516722348.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:49.351Z,1516722349.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:49.366Z,1516722349.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:49.751Z,1516722349.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:49.766Z,1516722349.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:49.768Z,1516722349.768 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:49.768Z,1516722349.768 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 249 2018-01-23T15:45:49.768Z,1516722349.768 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:45:49.810Z,1516722349.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:45:50.133Z,1516722350.133 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:50.173Z,1516722350.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:50.201Z,1516722350.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:45:50.201Z,1516722350.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 249 2018-01-23T15:45:50.555Z,1516722350.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:50.570Z,1516722350.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:50.571Z,1516722350.571 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:45:50.572Z,1516722350.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:45:50.572Z,1516722350.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:45:50.956Z,1516722350.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:50.971Z,1516722350.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:51.355Z,1516722351.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:51.375Z,1516722351.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:51.732Z,1516722351.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:51.780Z,1516722351.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:52.132Z,1516722352.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:52.154Z,1516722352.154 [PNI_TCM](ERROR): CRC does not match. Expected:0x61909 got:0x7618 2018-01-23T15:45:52.173Z,1516722352.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:52.544Z,1516722352.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:52.560Z,1516722352.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:52.943Z,1516722352.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:52.976Z,1516722352.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:53.360Z,1516722353.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:53.375Z,1516722353.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:53.760Z,1516722353.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:53.780Z,1516722353.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:54.156Z,1516722354.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:54.171Z,1516722354.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:54.546Z,1516722354.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:54.562Z,1516722354.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:54.933Z,1516722354.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:54.980Z,1516722354.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:55.360Z,1516722355.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:55.368Z,1516722355.368 [PNI_TCM](ERROR): CRC does not match. Expected:0x21458 got:0x25231 2018-01-23T15:45:55.404Z,1516722355.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:55.759Z,1516722355.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:55.774Z,1516722355.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:56.148Z,1516722356.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:56.171Z,1516722356.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:56.534Z,1516722356.534 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:56.577Z,1516722356.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:56.937Z,1516722356.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:56.964Z,1516722356.964 [PNI_TCM](ERROR): CRC does not match. Expected:0x17263 got:0x51190 2018-01-23T15:45:56.981Z,1516722356.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:57.363Z,1516722357.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:57.378Z,1516722357.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:57.754Z,1516722357.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:57.776Z,1516722357.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:58.149Z,1516722358.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:58.177Z,1516722358.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:58.533Z,1516722358.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:58.557Z,1516722358.557 [PNI_TCM](ERROR): CRC does not match. Expected:0x59100 got:0x15549 2018-01-23T15:45:58.577Z,1516722358.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:58.932Z,1516722358.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:58.965Z,1516722358.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:59.353Z,1516722359.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:59.381Z,1516722359.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:45:59.749Z,1516722359.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:45:59.795Z,1516722359.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:00.153Z,1516722360.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:00.165Z,1516722360.165 [PNI_TCM](ERROR): CRC does not match. Expected:0x25779 got:0x16840 2018-01-23T15:46:00.200Z,1516722360.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:00.533Z,1516722360.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:00.568Z,1516722360.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:00.932Z,1516722360.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:00.941Z,1516722360.941 [PNI_TCM](ERROR): CRC does not match. Expected:0x2662 got:0x7234 2018-01-23T15:46:00.966Z,1516722360.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:01.343Z,1516722361.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:01.388Z,1516722361.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:01.765Z,1516722361.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:01.772Z,1516722361.772 [PNI_TCM](ERROR): CRC does not match. Expected:0x2831 got:0x6210 2018-01-23T15:46:01.793Z,1516722361.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:02.145Z,1516722362.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:02.182Z,1516722362.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:02.539Z,1516722362.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:02.575Z,1516722362.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:02.940Z,1516722362.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:02.976Z,1516722362.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:02.976Z,1516722362.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 249 2018-01-23T15:46:02.976Z,1516722362.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:46:02.978Z,1516722362.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:02.978Z,1516722362.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 249 2018-01-23T15:46:02.978Z,1516722362.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:46:02.991Z,1516722362.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:46:02.991Z,1516722362.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:46:03.358Z,1516722363.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:03.396Z,1516722363.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:46:03.396Z,1516722363.396 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 249 2018-01-23T15:46:03.396Z,1516722363.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:46:03.396Z,1516722363.396 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 249 2018-01-23T15:46:03.760Z,1516722363.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:03.784Z,1516722363.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:46:03.785Z,1516722363.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:46:03.785Z,1516722363.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:46:03.785Z,1516722363.785 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:46:03.786Z,1516722363.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:46:03.786Z,1516722363.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:46:04.156Z,1516722364.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:04.180Z,1516722364.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:46:04.181Z,1516722364.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:04.542Z,1516722364.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:04.588Z,1516722364.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:46:04.589Z,1516722364.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:04.937Z,1516722364.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:04.962Z,1516722364.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:46:04.967Z,1516722364.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:05.343Z,1516722365.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:05.362Z,1516722365.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:46:05.363Z,1516722365.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:05.745Z,1516722365.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:05.761Z,1516722365.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:46:05.762Z,1516722365.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:06.143Z,1516722366.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:06.184Z,1516722366.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:46:06.185Z,1516722366.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:06.540Z,1516722366.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:06.555Z,1516722366.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:46:06.557Z,1516722366.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:06.938Z,1516722366.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:06.964Z,1516722366.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:46:06.964Z,1516722366.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:07.354Z,1516722367.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:07.376Z,1516722367.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:46:07.377Z,1516722367.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:07.755Z,1516722367.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:07.782Z,1516722367.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:46:07.799Z,1516722367.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:08.148Z,1516722368.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:08.180Z,1516722368.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:46:08.181Z,1516722368.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:08.533Z,1516722368.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:08.566Z,1516722368.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:46:08.567Z,1516722368.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:08.932Z,1516722368.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:08.973Z,1516722368.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:46:08.974Z,1516722368.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:09.352Z,1516722369.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:09.367Z,1516722369.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:46:09.368Z,1516722369.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:09.752Z,1516722369.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:09.785Z,1516722369.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:46:09.785Z,1516722369.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:10.158Z,1516722370.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:10.174Z,1516722370.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:46:10.175Z,1516722370.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:10.533Z,1516722370.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:10.561Z,1516722370.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:46:10.562Z,1516722370.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:10.932Z,1516722370.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:10.969Z,1516722370.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:46:10.970Z,1516722370.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:11.343Z,1516722371.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:11.382Z,1516722371.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:46:11.383Z,1516722371.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:11.748Z,1516722371.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:11.788Z,1516722371.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:46:11.789Z,1516722371.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:12.154Z,1516722372.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:12.178Z,1516722372.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:46:12.179Z,1516722372.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:12.538Z,1516722372.538 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:12.574Z,1516722372.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:46:12.575Z,1516722372.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:12.932Z,1516722372.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:12.955Z,1516722372.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:46:12.956Z,1516722372.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:13.343Z,1516722373.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:13.361Z,1516722373.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:46:13.363Z,1516722373.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:13.758Z,1516722373.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:13.792Z,1516722373.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:46:13.793Z,1516722373.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:14.145Z,1516722374.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:14.191Z,1516722374.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:46:14.192Z,1516722374.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:14.536Z,1516722374.536 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:14.569Z,1516722374.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:46:14.579Z,1516722374.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:14.945Z,1516722374.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:14.962Z,1516722374.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:46:14.964Z,1516722374.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:15.351Z,1516722375.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:15.369Z,1516722375.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:46:15.370Z,1516722375.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:15.749Z,1516722375.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:15.796Z,1516722375.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:46:15.797Z,1516722375.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:16.155Z,1516722376.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:16.180Z,1516722376.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:46:16.181Z,1516722376.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:16.539Z,1516722376.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:16.558Z,1516722376.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:46:16.559Z,1516722376.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:16.948Z,1516722376.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:16.966Z,1516722376.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:46:16.967Z,1516722376.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:17.352Z,1516722377.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:17.368Z,1516722377.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:46:17.369Z,1516722377.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:17.754Z,1516722377.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:17.769Z,1516722377.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:46:17.770Z,1516722377.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:18.151Z,1516722378.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:18.168Z,1516722378.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:46:18.170Z,1516722378.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:18.540Z,1516722378.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:18.567Z,1516722378.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:46:18.568Z,1516722378.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:18.930Z,1516722378.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:18.957Z,1516722378.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:46:18.958Z,1516722378.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:19.352Z,1516722379.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:19.367Z,1516722379.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:46:19.368Z,1516722379.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:19.759Z,1516722379.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:19.781Z,1516722379.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:46:19.782Z,1516722379.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:20.158Z,1516722380.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:20.205Z,1516722380.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:46:20.205Z,1516722380.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:20.539Z,1516722380.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:20.577Z,1516722380.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:46:20.578Z,1516722380.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:20.939Z,1516722380.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:20.974Z,1516722380.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:46:20.980Z,1516722380.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:21.350Z,1516722381.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:21.385Z,1516722381.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:46:21.386Z,1516722381.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:21.780Z,1516722381.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:21.801Z,1516722381.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:46:21.802Z,1516722381.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:22.163Z,1516722382.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:22.205Z,1516722382.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:46:22.206Z,1516722382.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:22.544Z,1516722382.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:22.597Z,1516722382.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:46:22.598Z,1516722382.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:22.959Z,1516722382.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:22.994Z,1516722382.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:23.376Z,1516722383.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:23.397Z,1516722383.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:23.748Z,1516722383.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:23.808Z,1516722383.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:24.143Z,1516722384.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:24.165Z,1516722384.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:24.540Z,1516722384.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:24.567Z,1516722384.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:24.944Z,1516722384.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:24.997Z,1516722384.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:25.363Z,1516722385.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:25.387Z,1516722385.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:25.780Z,1516722385.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:25.806Z,1516722385.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:26.158Z,1516722386.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:26.205Z,1516722386.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:26.550Z,1516722386.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:26.594Z,1516722386.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:26.949Z,1516722386.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:26.969Z,1516722386.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:27.348Z,1516722387.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:27.372Z,1516722387.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:27.750Z,1516722387.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:27.777Z,1516722387.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:34.108Z,1516722394.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:34.137Z,1516722394.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:34.270Z,1516722394.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:34.314Z,1516722394.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:34.653Z,1516722394.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:34.688Z,1516722394.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:35.053Z,1516722395.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:35.085Z,1516722395.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:35.447Z,1516722395.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:35.466Z,1516722395.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:35.847Z,1516722395.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:35.889Z,1516722395.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:36.258Z,1516722396.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:36.320Z,1516722396.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:36.657Z,1516722396.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:36.706Z,1516722396.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:37.056Z,1516722397.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:37.077Z,1516722397.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:37.455Z,1516722397.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:37.481Z,1516722397.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:37.865Z,1516722397.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:37.889Z,1516722397.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:38.270Z,1516722398.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:38.294Z,1516722398.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:38.655Z,1516722398.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:38.694Z,1516722398.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:39.055Z,1516722399.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:39.089Z,1516722399.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:39.457Z,1516722399.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:39.499Z,1516722399.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:39.850Z,1516722399.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:39.896Z,1516722399.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:40.250Z,1516722400.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:40.269Z,1516722400.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:40.647Z,1516722400.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:40.670Z,1516722400.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:41.043Z,1516722401.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:41.109Z,1516722401.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:41.459Z,1516722401.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:41.482Z,1516722401.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:41.843Z,1516722401.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:41.901Z,1516722401.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:42.238Z,1516722402.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:42.308Z,1516722402.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:42.670Z,1516722402.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:42.686Z,1516722402.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:43.064Z,1516722403.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:43.079Z,1516722403.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:43.447Z,1516722403.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:43.482Z,1516722403.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:43.841Z,1516722403.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:43.873Z,1516722403.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:44.241Z,1516722404.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:44.256Z,1516722404.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:44.648Z,1516722404.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:44.688Z,1516722404.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:45.042Z,1516722405.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:45.057Z,1516722405.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:45.456Z,1516722405.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:45.481Z,1516722405.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:45.851Z,1516722405.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:45.878Z,1516722405.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:46.245Z,1516722406.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:46.285Z,1516722406.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:46.645Z,1516722406.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:46.661Z,1516722406.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:47.046Z,1516722407.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:47.062Z,1516722407.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:47.446Z,1516722407.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:47.462Z,1516722407.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:47.840Z,1516722407.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:47.862Z,1516722407.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:48.244Z,1516722408.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:48.264Z,1516722408.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:48.645Z,1516722408.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:48.661Z,1516722408.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:49.060Z,1516722409.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:49.092Z,1516722409.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:49.448Z,1516722409.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:49.469Z,1516722409.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:49.848Z,1516722409.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:49.863Z,1516722409.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:50.240Z,1516722410.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:50.269Z,1516722410.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:50.649Z,1516722410.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:50.664Z,1516722410.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:51.038Z,1516722411.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:51.060Z,1516722411.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:51.452Z,1516722411.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:51.469Z,1516722411.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:51.851Z,1516722411.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:51.866Z,1516722411.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:52.247Z,1516722412.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:52.262Z,1516722412.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:52.638Z,1516722412.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:52.656Z,1516722412.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:53.036Z,1516722413.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:53.052Z,1516722413.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:53.444Z,1516722413.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:53.465Z,1516722413.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:53.851Z,1516722413.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:53.866Z,1516722413.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:54.248Z,1516722414.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:54.265Z,1516722414.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:54.637Z,1516722414.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:54.653Z,1516722414.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:55.036Z,1516722415.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:55.051Z,1516722415.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:55.447Z,1516722415.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:55.462Z,1516722415.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:55.844Z,1516722415.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:55.862Z,1516722415.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:56.245Z,1516722416.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:56.260Z,1516722416.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:56.637Z,1516722416.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:56.652Z,1516722416.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:57.040Z,1516722417.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:57.055Z,1516722417.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:57.449Z,1516722417.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:57.465Z,1516722417.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:57.850Z,1516722417.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:57.918Z,1516722417.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:58.246Z,1516722418.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:58.277Z,1516722418.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:58.638Z,1516722418.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:58.657Z,1516722418.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:59.036Z,1516722419.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:59.062Z,1516722419.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:59.449Z,1516722419.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:59.485Z,1516722419.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:46:59.855Z,1516722419.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:46:59.870Z,1516722419.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:00.244Z,1516722420.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:00.280Z,1516722420.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:00.640Z,1516722420.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:00.686Z,1516722420.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:01.038Z,1516722421.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:01.064Z,1516722421.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:01.454Z,1516722421.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:01.469Z,1516722421.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:01.851Z,1516722421.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:01.866Z,1516722421.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:02.250Z,1516722422.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:02.290Z,1516722422.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:02.644Z,1516722422.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:02.654Z,1516722422.654 [PNI_TCM](ERROR): CRC does not match. Expected:0x12289 got:0x49716 2018-01-23T15:47:02.673Z,1516722422.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:03.036Z,1516722423.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:03.060Z,1516722423.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:03.452Z,1516722423.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:03.467Z,1516722423.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:03.855Z,1516722423.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:03.873Z,1516722423.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:04.252Z,1516722424.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:04.269Z,1516722424.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:04.636Z,1516722424.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:04.665Z,1516722424.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:05.044Z,1516722425.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:05.059Z,1516722425.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:05.451Z,1516722425.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:05.498Z,1516722425.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:05.856Z,1516722425.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:05.864Z,1516722425.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x55695 got:0x6210 2018-01-23T15:47:05.899Z,1516722425.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:06.255Z,1516722426.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:06.269Z,1516722426.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:06.636Z,1516722426.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:06.673Z,1516722426.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:07.044Z,1516722427.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:07.081Z,1516722427.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:07.457Z,1516722427.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:07.473Z,1516722427.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:07.858Z,1516722427.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:07.880Z,1516722427.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:08.258Z,1516722428.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:08.273Z,1516722428.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:08.633Z,1516722428.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:08.732Z,1516722428.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:09.030Z,1516722429.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:09.067Z,1516722429.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:09.454Z,1516722429.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:09.469Z,1516722429.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:09.858Z,1516722429.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:09.873Z,1516722429.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:10.250Z,1516722430.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:10.285Z,1516722430.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:10.637Z,1516722430.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:10.667Z,1516722430.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:11.032Z,1516722431.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:11.072Z,1516722431.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:11.459Z,1516722431.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:11.474Z,1516722431.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:11.856Z,1516722431.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:11.889Z,1516722431.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:12.256Z,1516722432.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:12.274Z,1516722432.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:12.634Z,1516722432.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:12.674Z,1516722432.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:13.037Z,1516722433.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:13.067Z,1516722433.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:13.450Z,1516722433.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:13.480Z,1516722433.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:13.850Z,1516722433.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:13.883Z,1516722433.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:14.244Z,1516722434.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:14.280Z,1516722434.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:14.633Z,1516722434.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:14.674Z,1516722434.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:15.030Z,1516722435.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:15.083Z,1516722435.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:15.444Z,1516722435.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:15.474Z,1516722435.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:15.847Z,1516722435.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:15.886Z,1516722435.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:16.244Z,1516722436.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:16.277Z,1516722436.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:16.633Z,1516722436.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:16.684Z,1516722436.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:17.032Z,1516722437.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:17.052Z,1516722437.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:17.451Z,1516722437.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:17.482Z,1516722437.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:17.869Z,1516722437.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:17.889Z,1516722437.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:18.247Z,1516722438.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:18.285Z,1516722438.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:18.641Z,1516722438.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:18.656Z,1516722438.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:19.038Z,1516722439.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:19.053Z,1516722439.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:19.448Z,1516722439.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:19.479Z,1516722439.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:19.855Z,1516722439.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:19.892Z,1516722439.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:20.243Z,1516722440.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:20.258Z,1516722440.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:20.641Z,1516722440.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:20.656Z,1516722440.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:21.037Z,1516722441.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:21.067Z,1516722441.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:21.459Z,1516722441.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:21.474Z,1516722441.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:21.851Z,1516722441.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:21.866Z,1516722441.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:22.253Z,1516722442.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:22.271Z,1516722442.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:22.637Z,1516722442.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:22.670Z,1516722442.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:23.047Z,1516722443.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:23.061Z,1516722443.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:23.454Z,1516722443.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:23.479Z,1516722443.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:23.861Z,1516722443.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:23.880Z,1516722443.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:24.258Z,1516722444.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:24.280Z,1516722444.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:24.631Z,1516722444.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:24.669Z,1516722444.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:25.034Z,1516722445.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:25.065Z,1516722445.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:25.437Z,1516722445.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:25.466Z,1516722445.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:25.857Z,1516722445.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:25.876Z,1516722445.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:26.251Z,1516722446.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:26.301Z,1516722446.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:26.652Z,1516722446.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:26.673Z,1516722446.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:27.030Z,1516722447.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:27.054Z,1516722447.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:27.433Z,1516722447.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:27.468Z,1516722447.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:27.834Z,1516722447.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:27.849Z,1516722447.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:30.930Z,1516722450.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:30.953Z,1516722450.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:31.074Z,1516722451.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:31.121Z,1516722451.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:31.443Z,1516722451.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:31.458Z,1516722451.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:31.850Z,1516722451.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:31.892Z,1516722451.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:32.236Z,1516722452.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:32.251Z,1516722452.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:32.632Z,1516722452.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:32.646Z,1516722452.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:33.031Z,1516722453.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:33.046Z,1516722453.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:33.428Z,1516722453.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:33.457Z,1516722453.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:33.837Z,1516722453.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:33.856Z,1516722453.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:34.238Z,1516722454.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:34.253Z,1516722454.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:34.638Z,1516722454.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:34.657Z,1516722454.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:35.032Z,1516722455.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:35.047Z,1516722455.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:35.433Z,1516722455.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:35.448Z,1516722455.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:35.828Z,1516722455.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:35.851Z,1516722455.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:36.224Z,1516722456.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:36.256Z,1516722456.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:36.644Z,1516722456.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:36.659Z,1516722456.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:37.046Z,1516722457.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:37.061Z,1516722457.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:37.441Z,1516722457.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:37.467Z,1516722457.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:37.825Z,1516722457.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:37.852Z,1516722457.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:38.224Z,1516722458.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:38.259Z,1516722458.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:38.623Z,1516722458.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:38.657Z,1516722458.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:39.025Z,1516722459.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:39.053Z,1516722459.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:39.424Z,1516722459.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:39.456Z,1516722459.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:39.846Z,1516722459.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:39.861Z,1516722459.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:40.247Z,1516722460.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:40.262Z,1516722460.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:40.643Z,1516722460.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:40.658Z,1516722460.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:41.024Z,1516722461.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:41.057Z,1516722461.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:41.424Z,1516722461.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:41.452Z,1516722461.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:41.825Z,1516722461.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:41.857Z,1516722461.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:42.224Z,1516722462.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:42.251Z,1516722462.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:42.642Z,1516722462.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:42.662Z,1516722462.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:43.047Z,1516722463.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:43.062Z,1516722463.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:43.442Z,1516722463.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:43.457Z,1516722463.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:43.822Z,1516722463.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:43.857Z,1516722463.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:44.224Z,1516722464.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:44.257Z,1516722464.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:44.624Z,1516722464.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:44.651Z,1516722464.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:45.025Z,1516722465.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:45.052Z,1516722465.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:45.424Z,1516722465.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:45.457Z,1516722465.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:45.846Z,1516722465.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:45.861Z,1516722465.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:46.244Z,1516722466.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:46.259Z,1516722466.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:46.640Z,1516722466.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:46.667Z,1516722466.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:47.028Z,1516722467.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:47.060Z,1516722467.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:47.428Z,1516722467.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:47.455Z,1516722467.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:47.825Z,1516722467.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:47.856Z,1516722467.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:48.224Z,1516722468.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:48.258Z,1516722468.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:48.644Z,1516722468.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:48.659Z,1516722468.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:49.052Z,1516722469.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:49.073Z,1516722469.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:49.447Z,1516722469.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:49.468Z,1516722469.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:49.825Z,1516722469.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:49.861Z,1516722469.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:50.224Z,1516722470.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:50.251Z,1516722470.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:50.623Z,1516722470.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:50.666Z,1516722470.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:51.023Z,1516722471.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:51.046Z,1516722471.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:51.425Z,1516722471.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:51.461Z,1516722471.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:51.835Z,1516722471.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:51.875Z,1516722471.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:52.235Z,1516722472.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:52.263Z,1516722472.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:52.635Z,1516722472.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:52.669Z,1516722472.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:53.025Z,1516722473.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:53.062Z,1516722473.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:53.424Z,1516722473.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:53.465Z,1516722473.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:53.829Z,1516722473.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:53.861Z,1516722473.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:54.224Z,1516722474.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:54.241Z,1516722474.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:54.640Z,1516722474.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:54.667Z,1516722474.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:55.052Z,1516722475.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:55.081Z,1516722475.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:55.448Z,1516722475.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:55.474Z,1516722475.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:55.836Z,1516722475.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:55.852Z,1516722475.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:56.229Z,1516722476.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:56.245Z,1516722476.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:56.631Z,1516722476.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:56.647Z,1516722476.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:57.037Z,1516722477.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:57.052Z,1516722477.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:57.429Z,1516722477.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:57.452Z,1516722477.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:57.836Z,1516722477.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:57.851Z,1516722477.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:58.239Z,1516722478.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:58.254Z,1516722478.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:58.635Z,1516722478.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:58.650Z,1516722478.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:59.032Z,1516722479.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:59.047Z,1516722479.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:59.432Z,1516722479.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:59.448Z,1516722479.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:47:59.830Z,1516722479.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:47:59.857Z,1516722479.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:00.237Z,1516722480.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:00.253Z,1516722480.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:00.639Z,1516722480.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:00.655Z,1516722480.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:01.039Z,1516722481.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:01.054Z,1516722481.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:01.440Z,1516722481.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:01.455Z,1516722481.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:01.835Z,1516722481.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:01.850Z,1516722481.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:02.235Z,1516722482.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:02.250Z,1516722482.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:02.633Z,1516722482.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:02.649Z,1516722482.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:03.034Z,1516722483.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:03.050Z,1516722483.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:03.429Z,1516722483.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:03.460Z,1516722483.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:03.843Z,1516722483.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:03.859Z,1516722483.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:04.243Z,1516722484.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:04.259Z,1516722484.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:04.644Z,1516722484.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:04.661Z,1516722484.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:05.033Z,1516722485.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:05.049Z,1516722485.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:05.434Z,1516722485.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:05.449Z,1516722485.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:05.829Z,1516722485.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:05.856Z,1516722485.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:06.236Z,1516722486.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:06.252Z,1516722486.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:06.645Z,1516722486.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:06.660Z,1516722486.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:07.046Z,1516722487.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:07.061Z,1516722487.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:07.443Z,1516722487.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:07.458Z,1516722487.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:07.834Z,1516722487.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:07.849Z,1516722487.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:08.231Z,1516722488.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:08.251Z,1516722488.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:08.633Z,1516722488.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:08.652Z,1516722488.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:09.034Z,1516722489.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:09.049Z,1516722489.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:09.431Z,1516722489.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:09.451Z,1516722489.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:09.843Z,1516722489.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:09.858Z,1516722489.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:10.246Z,1516722490.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:10.262Z,1516722490.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:10.642Z,1516722490.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:10.658Z,1516722490.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:11.032Z,1516722491.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:11.047Z,1516722491.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:11.433Z,1516722491.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:11.448Z,1516722491.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:11.827Z,1516722491.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:11.860Z,1516722491.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:12.232Z,1516722492.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:12.247Z,1516722492.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:12.644Z,1516722492.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:12.659Z,1516722492.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:13.046Z,1516722493.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:13.065Z,1516722493.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:13.446Z,1516722493.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:13.461Z,1516722493.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:13.837Z,1516722493.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:13.852Z,1516722493.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:14.228Z,1516722494.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:14.259Z,1516722494.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:14.632Z,1516722494.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:14.647Z,1516722494.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:15.025Z,1516722495.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:15.065Z,1516722495.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:15.428Z,1516722495.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:15.464Z,1516722495.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:15.835Z,1516722495.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:15.869Z,1516722495.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:16.253Z,1516722496.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:16.268Z,1516722496.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:16.635Z,1516722496.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:16.661Z,1516722496.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:17.024Z,1516722497.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:17.068Z,1516722497.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:17.428Z,1516722497.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:17.460Z,1516722497.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:17.829Z,1516722497.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:17.844Z,1516722497.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:18.232Z,1516722498.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:18.247Z,1516722498.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:18.643Z,1516722498.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:18.670Z,1516722498.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:19.059Z,1516722499.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:19.074Z,1516722499.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:19.439Z,1516722499.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:19.474Z,1516722499.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:19.832Z,1516722499.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:19.848Z,1516722499.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:20.236Z,1516722500.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:20.277Z,1516722500.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:20.631Z,1516722500.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:20.645Z,1516722500.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:21.032Z,1516722501.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:21.047Z,1516722501.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:21.432Z,1516722501.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:21.446Z,1516722501.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:21.835Z,1516722501.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:21.850Z,1516722501.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:22.247Z,1516722502.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:22.262Z,1516722502.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:22.638Z,1516722502.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:22.657Z,1516722502.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:23.032Z,1516722503.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:23.046Z,1516722503.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:23.433Z,1516722503.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:23.449Z,1516722503.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:23.832Z,1516722503.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:23.851Z,1516722503.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:24.232Z,1516722504.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:24.252Z,1516722504.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:24.638Z,1516722504.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:24.654Z,1516722504.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:25.039Z,1516722505.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:25.054Z,1516722505.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:25.437Z,1516722505.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:25.452Z,1516722505.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:25.833Z,1516722505.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:25.848Z,1516722505.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:26.236Z,1516722506.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:26.255Z,1516722506.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:26.624Z,1516722506.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:26.659Z,1516722506.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:27.042Z,1516722507.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:27.058Z,1516722507.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:27.425Z,1516722507.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:27.457Z,1516722507.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:27.843Z,1516722507.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:27.858Z,1516722507.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:28.252Z,1516722508.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:28.267Z,1516722508.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:31.339Z,1516722511.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:31.355Z,1516722511.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:31.454Z,1516722511.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:31.500Z,1516722511.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:31.805Z,1516722511.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:31.821Z,1516722511.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:32.205Z,1516722512.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:32.220Z,1516722512.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:32.611Z,1516722512.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:32.627Z,1516722512.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:33.011Z,1516722513.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:33.026Z,1516722513.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:33.407Z,1516722513.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:33.422Z,1516722513.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:33.802Z,1516722513.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:33.825Z,1516722513.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:34.209Z,1516722514.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:34.224Z,1516722514.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:34.611Z,1516722514.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:34.626Z,1516722514.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:35.010Z,1516722515.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:35.025Z,1516722515.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:35.423Z,1516722515.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:35.438Z,1516722515.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:35.806Z,1516722515.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:35.821Z,1516722515.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:36.208Z,1516722516.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:36.223Z,1516722516.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:36.604Z,1516722516.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:36.624Z,1516722516.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:37.003Z,1516722517.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:37.026Z,1516722517.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:37.402Z,1516722517.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:37.425Z,1516722517.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:37.811Z,1516722517.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:37.826Z,1516722517.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:38.212Z,1516722518.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:38.227Z,1516722518.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:38.613Z,1516722518.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:38.633Z,1516722518.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:39.011Z,1516722519.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:39.026Z,1516722519.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:39.407Z,1516722519.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:39.422Z,1516722519.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:39.805Z,1516722519.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:39.829Z,1516722519.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:40.210Z,1516722520.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:40.226Z,1516722520.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:40.616Z,1516722520.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:40.632Z,1516722520.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:41.016Z,1516722521.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:41.034Z,1516722521.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:41.412Z,1516722521.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:41.441Z,1516722521.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:41.811Z,1516722521.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:41.826Z,1516722521.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:42.194Z,1516722522.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:42.230Z,1516722522.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:42.616Z,1516722522.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:42.631Z,1516722522.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:43.020Z,1516722523.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:43.040Z,1516722523.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:43.416Z,1516722523.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:43.432Z,1516722523.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:43.797Z,1516722523.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:43.830Z,1516722523.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:44.196Z,1516722524.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:44.231Z,1516722524.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:44.616Z,1516722524.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:44.632Z,1516722524.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:45.019Z,1516722525.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:45.041Z,1516722525.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:45.417Z,1516722525.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:45.445Z,1516722525.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:45.798Z,1516722525.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:45.813Z,1516722525.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:46.197Z,1516722526.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:46.217Z,1516722526.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:46.615Z,1516722526.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:46.641Z,1516722526.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:47.012Z,1516722527.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:47.043Z,1516722527.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:47.416Z,1516722527.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:47.447Z,1516722527.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:47.809Z,1516722527.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:47.824Z,1516722527.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:48.198Z,1516722528.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:48.213Z,1516722528.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:48.619Z,1516722528.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:48.643Z,1516722528.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:49.023Z,1516722529.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:49.049Z,1516722529.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:49.416Z,1516722529.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:49.451Z,1516722529.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:49.805Z,1516722529.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:49.825Z,1516722529.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:50.204Z,1516722530.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:50.219Z,1516722530.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:50.616Z,1516722530.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:50.644Z,1516722530.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:50.646Z,1516722530.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:50.646Z,1516722530.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 250 2018-01-23T15:48:50.646Z,1516722530.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:48:50.678Z,1516722530.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:48:51.011Z,1516722531.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:51.026Z,1516722531.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:51.059Z,1516722531.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:48:51.059Z,1516722531.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 250 2018-01-23T15:48:51.411Z,1516722531.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:51.426Z,1516722531.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:51.427Z,1516722531.427 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:48:51.428Z,1516722531.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:48:51.428Z,1516722531.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:48:51.801Z,1516722531.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:51.829Z,1516722531.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:52.204Z,1516722532.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:52.223Z,1516722532.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:52.614Z,1516722532.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:52.636Z,1516722532.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:53.015Z,1516722533.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:53.030Z,1516722533.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:53.415Z,1516722533.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:53.430Z,1516722533.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:53.805Z,1516722533.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:53.842Z,1516722533.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:54.194Z,1516722534.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:54.226Z,1516722534.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:54.619Z,1516722534.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:54.634Z,1516722534.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:55.026Z,1516722535.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:55.041Z,1516722535.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:55.419Z,1516722535.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:55.434Z,1516722535.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:55.797Z,1516722535.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:55.825Z,1516722535.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:56.200Z,1516722536.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:56.268Z,1516722536.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:56.612Z,1516722536.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:56.634Z,1516722536.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:57.019Z,1516722537.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:57.034Z,1516722537.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:57.417Z,1516722537.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:57.432Z,1516722537.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:57.797Z,1516722537.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:57.828Z,1516722537.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:58.196Z,1516722538.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:58.233Z,1516722538.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:58.611Z,1516722538.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:58.635Z,1516722538.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:59.019Z,1516722539.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:59.034Z,1516722539.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:59.411Z,1516722539.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:59.434Z,1516722539.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:48:59.797Z,1516722539.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:48:59.834Z,1516722539.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:00.194Z,1516722540.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:00.217Z,1516722540.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:00.608Z,1516722540.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:00.645Z,1516722540.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:01.024Z,1516722541.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:01.049Z,1516722541.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:01.408Z,1516722541.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:01.433Z,1516722541.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:01.797Z,1516722541.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:01.833Z,1516722541.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:02.201Z,1516722542.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:02.245Z,1516722542.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:02.608Z,1516722542.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:02.643Z,1516722542.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:03.019Z,1516722543.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:03.049Z,1516722543.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:03.419Z,1516722543.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:03.446Z,1516722543.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:03.805Z,1516722543.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:03.821Z,1516722543.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:03.821Z,1516722543.821 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 250 2018-01-23T15:49:03.821Z,1516722543.821 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:49:03.839Z,1516722543.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:03.839Z,1516722543.839 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 250 2018-01-23T15:49:03.839Z,1516722543.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:49:03.860Z,1516722543.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:49:03.860Z,1516722543.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:49:04.208Z,1516722544.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:04.250Z,1516722544.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:49:04.250Z,1516722544.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 250 2018-01-23T15:49:04.267Z,1516722544.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:49:04.267Z,1516722544.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 250 2018-01-23T15:49:04.619Z,1516722544.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:04.645Z,1516722544.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:49:04.646Z,1516722544.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:49:04.646Z,1516722544.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:49:04.659Z,1516722544.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:49:04.659Z,1516722544.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:49:04.659Z,1516722544.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:49:05.014Z,1516722545.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:05.029Z,1516722545.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:49:05.030Z,1516722545.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:05.412Z,1516722545.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:05.433Z,1516722545.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:49:05.434Z,1516722545.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:05.798Z,1516722545.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:05.834Z,1516722545.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:49:05.835Z,1516722545.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:06.194Z,1516722546.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:06.221Z,1516722546.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:49:06.222Z,1516722546.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:06.615Z,1516722546.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:06.630Z,1516722546.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:49:06.631Z,1516722546.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:07.026Z,1516722547.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:07.041Z,1516722547.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:49:07.042Z,1516722547.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:07.416Z,1516722547.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:07.430Z,1516722547.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:49:07.432Z,1516722547.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:07.798Z,1516722547.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:07.833Z,1516722547.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:49:07.833Z,1516722547.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:08.201Z,1516722548.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:08.234Z,1516722548.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:49:08.236Z,1516722548.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:08.620Z,1516722548.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:08.635Z,1516722548.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:49:08.636Z,1516722548.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:09.018Z,1516722549.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:09.041Z,1516722549.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:49:09.041Z,1516722549.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:09.414Z,1516722549.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:09.438Z,1516722549.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:49:09.439Z,1516722549.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:09.797Z,1516722549.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:09.824Z,1516722549.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:49:09.825Z,1516722549.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:10.196Z,1516722550.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:10.229Z,1516722550.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:49:10.230Z,1516722550.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:10.614Z,1516722550.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:10.636Z,1516722550.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:49:10.637Z,1516722550.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:11.020Z,1516722551.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:11.034Z,1516722551.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:49:11.035Z,1516722551.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:11.416Z,1516722551.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:11.431Z,1516722551.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:49:11.432Z,1516722551.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:11.798Z,1516722551.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:11.829Z,1516722551.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:49:11.830Z,1516722551.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:12.196Z,1516722552.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:12.228Z,1516722552.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:49:12.229Z,1516722552.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:12.615Z,1516722552.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:12.630Z,1516722552.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:49:12.631Z,1516722552.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:13.018Z,1516722553.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:13.041Z,1516722553.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:49:13.042Z,1516722553.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:13.416Z,1516722553.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:13.430Z,1516722553.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:49:13.431Z,1516722553.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:13.796Z,1516722553.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:13.832Z,1516722553.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:49:13.833Z,1516722553.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:14.197Z,1516722554.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:14.232Z,1516722554.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:49:14.233Z,1516722554.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:14.600Z,1516722554.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:14.632Z,1516722554.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:49:14.633Z,1516722554.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:15.024Z,1516722555.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:15.039Z,1516722555.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:49:15.040Z,1516722555.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:15.419Z,1516722555.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:15.442Z,1516722555.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:49:15.447Z,1516722555.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:15.812Z,1516722555.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:15.844Z,1516722555.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:49:15.845Z,1516722555.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:16.205Z,1516722556.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:16.242Z,1516722556.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:49:16.243Z,1516722556.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:16.598Z,1516722556.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:16.613Z,1516722556.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:49:16.614Z,1516722556.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:17.002Z,1516722557.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:17.017Z,1516722557.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:49:17.018Z,1516722557.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:17.401Z,1516722557.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:17.429Z,1516722557.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:49:17.430Z,1516722557.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:17.816Z,1516722557.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:17.838Z,1516722557.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:49:17.839Z,1516722557.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:18.216Z,1516722558.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:18.249Z,1516722558.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:49:18.249Z,1516722558.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:18.620Z,1516722558.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:18.648Z,1516722558.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:49:18.649Z,1516722558.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:18.996Z,1516722558.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:19.028Z,1516722559.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:49:19.029Z,1516722559.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:19.400Z,1516722559.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:19.437Z,1516722559.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:49:19.438Z,1516722559.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:19.800Z,1516722559.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:19.841Z,1516722559.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:49:19.842Z,1516722559.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:20.203Z,1516722560.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:20.217Z,1516722560.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:49:20.218Z,1516722560.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:20.608Z,1516722560.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:20.645Z,1516722560.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:49:20.646Z,1516722560.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:21.011Z,1516722561.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:21.026Z,1516722561.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:49:21.028Z,1516722561.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:21.411Z,1516722561.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:21.426Z,1516722561.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:49:21.427Z,1516722561.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:21.810Z,1516722561.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:21.825Z,1516722561.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:49:21.826Z,1516722561.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:22.205Z,1516722562.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:22.219Z,1516722562.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:49:22.220Z,1516722562.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:22.605Z,1516722562.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:22.619Z,1516722562.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:49:22.620Z,1516722562.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:23.004Z,1516722563.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:23.023Z,1516722563.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:49:23.024Z,1516722563.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:23.400Z,1516722563.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:23.429Z,1516722563.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:49:23.430Z,1516722563.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:23.811Z,1516722563.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:23.826Z,1516722563.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:24.211Z,1516722564.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:24.227Z,1516722564.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:24.610Z,1516722564.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:24.625Z,1516722564.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:25.010Z,1516722565.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:25.024Z,1516722565.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:25.408Z,1516722565.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:25.424Z,1516722565.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:25.801Z,1516722565.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:25.822Z,1516722565.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:26.206Z,1516722566.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:26.221Z,1516722566.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:26.605Z,1516722566.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:26.620Z,1516722566.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:27.010Z,1516722567.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:27.033Z,1516722567.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:27.415Z,1516722567.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:27.430Z,1516722567.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:27.433Z,1516722567.433 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:49:27.433Z,1516722567.433 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:49:27.433Z,1516722567.433 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:49:27.433Z,1516722567.433 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:49:27.814Z,1516722567.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:27.830Z,1516722567.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:27.833Z,1516722567.833 [Default:CheckIn:D] Stopped 2018-01-23T15:49:27.833Z,1516722567.833 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:49:28.205Z,1516722568.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:28.220Z,1516722568.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:28.223Z,1516722568.223 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 751.596224 min 2018-01-23T15:49:28.223Z,1516722568.223 [Default:CheckIn:E] Stopped 2018-01-23T15:49:28.223Z,1516722568.223 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn] Stopped 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn](INFO): Running loop #74 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn] Running Loop=74 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:49:28.224Z,1516722568.224 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:49:28.606Z,1516722568.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:28.629Z,1516722568.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:31.694Z,1516722571.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:31.717Z,1516722571.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:31.814Z,1516722571.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:31.861Z,1516722571.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:32.171Z,1516722572.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:32.186Z,1516722572.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:32.591Z,1516722572.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:32.615Z,1516722572.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:32.972Z,1516722572.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:32.986Z,1516722572.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:33.369Z,1516722573.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:33.384Z,1516722573.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:33.770Z,1516722573.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:33.788Z,1516722573.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:34.168Z,1516722574.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:34.183Z,1516722574.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:34.568Z,1516722574.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:34.583Z,1516722574.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:34.972Z,1516722574.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:34.987Z,1516722574.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:35.375Z,1516722575.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:35.390Z,1516722575.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:35.783Z,1516722575.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:35.814Z,1516722575.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:36.162Z,1516722576.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:36.201Z,1516722576.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:36.570Z,1516722576.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:36.585Z,1516722576.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:36.968Z,1516722576.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:36.987Z,1516722576.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:37.371Z,1516722577.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:37.386Z,1516722577.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:37.783Z,1516722577.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:37.814Z,1516722577.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:38.175Z,1516722578.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:38.190Z,1516722578.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:38.572Z,1516722578.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:38.587Z,1516722578.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:38.968Z,1516722578.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:38.986Z,1516722578.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:39.368Z,1516722579.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:39.387Z,1516722579.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:39.765Z,1516722579.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:39.797Z,1516722579.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:40.168Z,1516722580.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:40.183Z,1516722580.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:40.563Z,1516722580.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:40.596Z,1516722580.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:40.978Z,1516722580.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:41.001Z,1516722581.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:41.383Z,1516722581.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:41.398Z,1516722581.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:41.779Z,1516722581.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:41.794Z,1516722581.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:42.175Z,1516722582.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:42.190Z,1516722582.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:42.564Z,1516722582.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:42.596Z,1516722582.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:42.973Z,1516722582.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:42.988Z,1516722582.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:43.369Z,1516722583.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:43.397Z,1516722583.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:43.787Z,1516722583.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:43.802Z,1516722583.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:44.184Z,1516722584.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:44.199Z,1516722584.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:44.576Z,1516722584.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:44.607Z,1516722584.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:44.961Z,1516722584.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:44.989Z,1516722584.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:45.365Z,1516722585.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:45.392Z,1516722585.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:45.761Z,1516722585.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:45.793Z,1516722585.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:46.166Z,1516722586.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:46.197Z,1516722586.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:46.561Z,1516722586.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:46.598Z,1516722586.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:46.971Z,1516722586.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:47.009Z,1516722587.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:47.390Z,1516722587.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:47.412Z,1516722587.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:47.771Z,1516722587.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:47.799Z,1516722587.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:48.161Z,1516722588.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:48.201Z,1516722588.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:48.565Z,1516722588.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:48.605Z,1516722588.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:48.964Z,1516722588.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:48.985Z,1516722588.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:49.365Z,1516722589.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:49.381Z,1516722589.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:49.779Z,1516722589.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:49.807Z,1516722589.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:50.183Z,1516722590.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:50.198Z,1516722590.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:50.580Z,1516722590.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:50.595Z,1516722590.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:50.966Z,1516722590.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:50.997Z,1516722590.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:51.375Z,1516722591.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:51.397Z,1516722591.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:51.774Z,1516722591.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:51.790Z,1516722591.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:52.167Z,1516722592.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:52.190Z,1516722592.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:52.568Z,1516722592.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:52.596Z,1516722592.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:52.980Z,1516722592.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:53.001Z,1516722593.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:53.382Z,1516722593.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:53.397Z,1516722593.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:53.781Z,1516722593.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:53.801Z,1516722593.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:54.170Z,1516722594.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:54.186Z,1516722594.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:54.564Z,1516722594.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:54.597Z,1516722594.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:54.968Z,1516722594.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:54.990Z,1516722594.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:55.370Z,1516722595.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:55.385Z,1516722595.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:55.779Z,1516722595.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:55.795Z,1516722595.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:56.183Z,1516722596.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:56.199Z,1516722596.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:56.580Z,1516722596.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:56.594Z,1516722596.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:56.965Z,1516722596.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:56.987Z,1516722596.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:57.373Z,1516722597.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:57.388Z,1516722597.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:57.770Z,1516722597.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:57.785Z,1516722597.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:58.168Z,1516722598.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:58.195Z,1516722598.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:58.573Z,1516722598.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:58.588Z,1516722598.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:58.980Z,1516722598.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:58.995Z,1516722598.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:59.382Z,1516722599.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:59.397Z,1516722599.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:49:59.780Z,1516722599.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:49:59.795Z,1516722599.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:00.174Z,1516722600.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:00.196Z,1516722600.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:00.573Z,1516722600.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:00.588Z,1516722600.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:00.962Z,1516722600.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:00.997Z,1516722600.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:01.361Z,1516722601.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:01.394Z,1516722601.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:01.786Z,1516722601.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:01.801Z,1516722601.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:02.183Z,1516722602.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:02.198Z,1516722602.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:02.580Z,1516722602.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:02.595Z,1516722602.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:02.961Z,1516722602.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:02.988Z,1516722602.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:03.365Z,1516722603.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:03.392Z,1516722603.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:03.761Z,1516722603.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:03.797Z,1516722603.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:04.162Z,1516722604.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:04.188Z,1516722604.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:04.561Z,1516722604.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:04.593Z,1516722604.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:04.988Z,1516722604.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:05.003Z,1516722605.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:05.387Z,1516722605.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:05.402Z,1516722605.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:05.780Z,1516722605.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:05.795Z,1516722605.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:06.161Z,1516722606.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:06.197Z,1516722606.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:06.566Z,1516722606.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:06.592Z,1516722606.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:06.982Z,1516722606.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:06.997Z,1516722606.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:07.381Z,1516722607.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:07.396Z,1516722607.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:07.787Z,1516722607.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:07.802Z,1516722607.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:08.180Z,1516722608.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:08.211Z,1516722608.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:08.588Z,1516722608.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:08.603Z,1516722608.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:08.961Z,1516722608.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:08.992Z,1516722608.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:09.365Z,1516722609.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:09.397Z,1516722609.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:09.764Z,1516722609.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:09.798Z,1516722609.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:10.166Z,1516722610.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:10.205Z,1516722610.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:10.565Z,1516722610.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:10.597Z,1516722610.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:10.971Z,1516722610.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:11.005Z,1516722611.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:11.383Z,1516722611.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:11.399Z,1516722611.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:11.792Z,1516722611.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:11.807Z,1516722611.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:12.165Z,1516722612.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:12.198Z,1516722612.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:12.565Z,1516722612.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:12.597Z,1516722612.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:12.964Z,1516722612.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:12.997Z,1516722612.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:13.364Z,1516722613.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:13.399Z,1516722613.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:13.788Z,1516722613.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:13.802Z,1516722613.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:14.183Z,1516722614.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:14.202Z,1516722614.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:14.572Z,1516722614.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:14.606Z,1516722614.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:14.964Z,1516722614.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:14.999Z,1516722614.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:15.365Z,1516722615.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:15.401Z,1516722615.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:15.761Z,1516722615.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:15.806Z,1516722615.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:16.168Z,1516722616.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:16.202Z,1516722616.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:16.564Z,1516722616.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:16.595Z,1516722616.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:16.979Z,1516722616.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:17.007Z,1516722617.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:17.379Z,1516722617.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:17.406Z,1516722617.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:17.773Z,1516722617.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:17.805Z,1516722617.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:18.168Z,1516722618.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:18.182Z,1516722618.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:18.566Z,1516722618.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:18.581Z,1516722618.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:18.973Z,1516722618.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:18.988Z,1516722618.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:19.373Z,1516722619.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:19.388Z,1516722619.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:19.787Z,1516722619.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:19.810Z,1516722619.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:20.191Z,1516722620.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:20.221Z,1516722620.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:20.582Z,1516722620.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:20.619Z,1516722620.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:20.973Z,1516722620.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:20.992Z,1516722620.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:21.374Z,1516722621.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:21.389Z,1516722621.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:21.772Z,1516722621.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:21.787Z,1516722621.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:22.177Z,1516722622.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:22.193Z,1516722622.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:22.569Z,1516722622.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:22.590Z,1516722622.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:22.979Z,1516722622.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:22.994Z,1516722622.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:23.376Z,1516722623.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:23.391Z,1516722623.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:23.787Z,1516722623.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:23.802Z,1516722623.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:24.173Z,1516722624.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:24.189Z,1516722624.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:24.568Z,1516722624.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:24.592Z,1516722624.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:24.971Z,1516722624.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:24.994Z,1516722624.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:25.375Z,1516722625.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:25.390Z,1516722625.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:25.785Z,1516722625.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:25.800Z,1516722625.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:26.181Z,1516722626.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:26.208Z,1516722626.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:26.588Z,1516722626.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:26.603Z,1516722626.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:26.976Z,1516722626.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:26.992Z,1516722626.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:27.365Z,1516722627.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:27.399Z,1516722627.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:27.789Z,1516722627.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:27.805Z,1516722627.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:28.187Z,1516722628.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:28.202Z,1516722628.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:28.584Z,1516722628.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:28.599Z,1516722628.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:28.963Z,1516722628.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:28.996Z,1516722628.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:32.082Z,1516722632.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:32.105Z,1516722632.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:32.215Z,1516722632.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:32.248Z,1516722632.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:32.607Z,1516722632.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:32.641Z,1516722632.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:32.996Z,1516722632.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:33.011Z,1516722633.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:33.390Z,1516722633.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:33.406Z,1516722633.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:33.791Z,1516722633.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:33.806Z,1516722633.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:34.195Z,1516722634.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:34.210Z,1516722634.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:34.592Z,1516722634.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:34.613Z,1516722634.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:34.996Z,1516722634.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:35.011Z,1516722635.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:35.397Z,1516722635.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:35.417Z,1516722635.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:35.803Z,1516722635.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:35.818Z,1516722635.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:36.194Z,1516722636.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:36.209Z,1516722636.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:36.590Z,1516722636.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:36.606Z,1516722636.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:36.996Z,1516722636.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:37.012Z,1516722637.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:37.392Z,1516722637.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:37.409Z,1516722637.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:37.790Z,1516722637.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:37.824Z,1516722637.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:38.198Z,1516722638.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:38.214Z,1516722638.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:38.598Z,1516722638.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:38.613Z,1516722638.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:38.984Z,1516722638.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:39.009Z,1516722639.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:39.392Z,1516722639.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:39.407Z,1516722639.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:39.799Z,1516722639.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:39.814Z,1516722639.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:40.197Z,1516722640.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:40.221Z,1516722640.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:40.603Z,1516722640.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:40.618Z,1516722640.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:40.993Z,1516722640.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:41.007Z,1516722641.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:41.391Z,1516722641.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:41.406Z,1516722641.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:41.804Z,1516722641.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:41.819Z,1516722641.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:42.206Z,1516722642.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:42.221Z,1516722642.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:42.589Z,1516722642.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:42.611Z,1516722642.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:42.995Z,1516722642.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:43.010Z,1516722643.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:43.376Z,1516722643.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:43.417Z,1516722643.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:43.801Z,1516722643.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:43.809Z,1516722643.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x39948 got:0x36377 2018-01-23T15:50:43.848Z,1516722643.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:44.204Z,1516722644.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:44.225Z,1516722644.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:44.600Z,1516722644.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:44.615Z,1516722644.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:44.977Z,1516722644.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:45.017Z,1516722645.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:45.396Z,1516722645.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:45.411Z,1516722645.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:45.806Z,1516722645.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:45.829Z,1516722645.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:46.189Z,1516722646.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:46.212Z,1516722646.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:46.604Z,1516722646.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:46.621Z,1516722646.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:46.981Z,1516722646.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:47.013Z,1516722647.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:47.374Z,1516722647.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:47.407Z,1516722647.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:47.803Z,1516722647.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:47.811Z,1516722647.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x53650 got:0x33286 2018-01-23T15:50:47.850Z,1516722647.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:48.207Z,1516722648.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:48.224Z,1516722648.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:48.592Z,1516722648.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:48.617Z,1516722648.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:48.981Z,1516722648.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:49.011Z,1516722649.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:49.378Z,1516722649.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:49.416Z,1516722649.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:49.796Z,1516722649.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:49.829Z,1516722649.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:50.196Z,1516722650.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:50.214Z,1516722650.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:50.592Z,1516722650.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:50.626Z,1516722650.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:50.978Z,1516722650.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:51.018Z,1516722651.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:51.381Z,1516722651.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:51.425Z,1516722651.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:51.801Z,1516722651.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:51.819Z,1516722651.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:52.194Z,1516722652.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:52.218Z,1516722652.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:52.602Z,1516722652.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:52.618Z,1516722652.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:52.981Z,1516722652.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:53.023Z,1516722653.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:53.370Z,1516722653.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:53.393Z,1516722653.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:53.803Z,1516722653.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:53.818Z,1516722653.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:54.207Z,1516722654.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:54.222Z,1516722654.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:54.600Z,1516722654.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:54.633Z,1516722654.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:54.981Z,1516722654.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:55.012Z,1516722655.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:55.384Z,1516722655.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:55.416Z,1516722655.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:55.803Z,1516722655.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:55.818Z,1516722655.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:56.207Z,1516722656.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:56.246Z,1516722656.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:56.597Z,1516722656.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:56.621Z,1516722656.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:56.977Z,1516722656.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:57.010Z,1516722657.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:57.380Z,1516722657.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:57.419Z,1516722657.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:57.787Z,1516722657.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:57.828Z,1516722657.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:58.187Z,1516722658.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:58.226Z,1516722658.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:58.591Z,1516722658.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:58.621Z,1516722658.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:58.977Z,1516722658.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:59.015Z,1516722659.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:59.376Z,1516722659.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:59.413Z,1516722659.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:50:59.791Z,1516722659.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:50:59.821Z,1516722659.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:00.191Z,1516722660.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:00.223Z,1516722660.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:00.592Z,1516722660.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:00.621Z,1516722660.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:00.985Z,1516722660.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:01.020Z,1516722661.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:01.376Z,1516722661.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:01.391Z,1516722661.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:01.796Z,1516722661.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:01.822Z,1516722661.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:02.196Z,1516722662.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:02.223Z,1516722662.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:02.598Z,1516722662.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:02.636Z,1516722662.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:02.979Z,1516722662.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:02.994Z,1516722662.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:03.384Z,1516722663.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:03.421Z,1516722663.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:03.795Z,1516722663.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:03.826Z,1516722663.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:04.191Z,1516722664.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:04.206Z,1516722664.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:04.595Z,1516722664.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:04.610Z,1516722664.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:04.986Z,1516722664.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:05.001Z,1516722665.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:05.383Z,1516722665.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:05.412Z,1516722665.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:05.802Z,1516722665.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:05.818Z,1516722665.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:06.201Z,1516722666.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:06.216Z,1516722666.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:06.592Z,1516722666.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:06.622Z,1516722666.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:06.981Z,1516722666.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:07.013Z,1516722667.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:07.375Z,1516722667.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:07.411Z,1516722667.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:07.800Z,1516722667.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:07.821Z,1516722667.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:08.203Z,1516722668.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:08.223Z,1516722668.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:08.596Z,1516722668.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:08.616Z,1516722668.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:08.974Z,1516722668.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:08.998Z,1516722668.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:09.377Z,1516722669.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:09.408Z,1516722669.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:09.775Z,1516722669.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:09.790Z,1516722669.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:10.191Z,1516722670.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:10.225Z,1516722670.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:10.602Z,1516722670.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:10.617Z,1516722670.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:10.991Z,1516722670.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:11.017Z,1516722671.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:11.384Z,1516722671.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:11.407Z,1516722671.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:11.784Z,1516722671.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:11.821Z,1516722671.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:12.182Z,1516722672.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:12.197Z,1516722672.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:12.583Z,1516722672.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:12.605Z,1516722672.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:12.999Z,1516722672.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:13.035Z,1516722673.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:13.392Z,1516722673.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:13.436Z,1516722673.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:13.800Z,1516722673.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:13.833Z,1516722673.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:14.188Z,1516722674.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:14.203Z,1516722674.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:14.585Z,1516722674.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:14.608Z,1516722674.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:14.980Z,1516722674.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:15.011Z,1516722675.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:15.390Z,1516722675.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:15.406Z,1516722675.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:15.785Z,1516722675.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:15.802Z,1516722675.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:16.194Z,1516722676.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:16.225Z,1516722676.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:16.604Z,1516722676.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:16.628Z,1516722676.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:16.000Z,1516722677.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:17.016Z,1516722677.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:17.377Z,1516722677.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:17.403Z,1516722677.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:17.793Z,1516722677.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:17.813Z,1516722677.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:18.177Z,1516722678.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:18.210Z,1516722678.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:18.574Z,1516722678.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:18.601Z,1516722678.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:19.004Z,1516722679.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:19.019Z,1516722679.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:19.400Z,1516722679.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:19.415Z,1516722679.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:19.796Z,1516722679.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:19.811Z,1516722679.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:20.184Z,1516722680.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:20.211Z,1516722680.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:20.576Z,1516722680.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:20.610Z,1516722680.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:20.974Z,1516722680.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:20.998Z,1516722680.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:21.385Z,1516722681.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:21.412Z,1516722681.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:21.776Z,1516722681.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:21.814Z,1516722681.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:22.187Z,1516722682.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:22.223Z,1516722682.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:22.604Z,1516722682.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:22.619Z,1516722682.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:22.987Z,1516722682.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:23.020Z,1516722683.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:23.380Z,1516722683.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:23.413Z,1516722683.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:23.784Z,1516722683.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:23.811Z,1516722683.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:24.185Z,1516722684.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:24.213Z,1516722684.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:24.580Z,1516722684.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:24.613Z,1516722684.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:25.004Z,1516722685.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:25.019Z,1516722685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:25.401Z,1516722685.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:25.416Z,1516722685.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:25.787Z,1516722685.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:25.824Z,1516722685.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:26.184Z,1516722686.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:26.211Z,1516722686.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:26.576Z,1516722686.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:26.614Z,1516722686.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:26.974Z,1516722686.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:26.990Z,1516722686.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:27.381Z,1516722687.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:27.412Z,1516722687.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:27.776Z,1516722687.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:27.796Z,1516722687.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:28.191Z,1516722688.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:28.227Z,1516722688.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:28.596Z,1516722688.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:28.626Z,1516722688.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:28.996Z,1516722688.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:29.030Z,1516722689.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:32.077Z,1516722692.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:32.097Z,1516722692.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:32.190Z,1516722692.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:32.229Z,1516722692.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:32.579Z,1516722692.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:32.594Z,1516722692.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:32.983Z,1516722692.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:32.998Z,1516722692.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:33.380Z,1516722693.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:33.395Z,1516722693.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:33.768Z,1516722693.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:33.789Z,1516722693.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:34.171Z,1516722694.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:34.186Z,1516722694.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:34.563Z,1516722694.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:34.596Z,1516722694.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:34.977Z,1516722694.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:34.998Z,1516722694.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:35.383Z,1516722695.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:35.398Z,1516722695.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:35.779Z,1516722695.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:35.794Z,1516722695.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:36.165Z,1516722696.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:36.189Z,1516722696.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:36.570Z,1516722696.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:36.585Z,1516722696.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:36.965Z,1516722696.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:36.988Z,1516722696.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:37.372Z,1516722697.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:37.394Z,1516722697.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:37.771Z,1516722697.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:37.786Z,1516722697.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:38.182Z,1516722698.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:38.197Z,1516722698.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:38.582Z,1516722698.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:38.598Z,1516722698.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:38.981Z,1516722698.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:38.996Z,1516722698.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:39.365Z,1516722699.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:39.388Z,1516722699.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:39.765Z,1516722699.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:39.797Z,1516722699.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:40.175Z,1516722700.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:40.191Z,1516722700.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:40.561Z,1516722700.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:40.592Z,1516722700.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:40.988Z,1516722700.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:41.004Z,1516722701.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:41.384Z,1516722701.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:41.400Z,1516722701.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:41.775Z,1516722701.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:41.798Z,1516722701.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:42.161Z,1516722702.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:42.197Z,1516722702.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:42.566Z,1516722702.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:42.601Z,1516722702.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:42.966Z,1516722702.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:42.997Z,1516722702.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:43.362Z,1516722703.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:43.378Z,1516722703.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:43.765Z,1516722703.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:43.781Z,1516722703.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:44.184Z,1516722704.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:44.209Z,1516722704.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:44.588Z,1516722704.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:44.614Z,1516722704.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:44.982Z,1516722704.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:45.010Z,1516722705.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:45.372Z,1516722705.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:45.388Z,1516722705.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:45.768Z,1516722705.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:45.787Z,1516722705.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:46.171Z,1516722706.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:46.186Z,1516722706.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:46.569Z,1516722706.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:46.592Z,1516722706.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:46.979Z,1516722706.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:46.995Z,1516722706.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:47.380Z,1516722707.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:47.395Z,1516722707.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:47.780Z,1516722707.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:47.801Z,1516722707.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:48.171Z,1516722708.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:48.186Z,1516722708.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:48.571Z,1516722708.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:48.586Z,1516722708.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:48.966Z,1516722708.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:48.000Z,1516722709.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:49.369Z,1516722709.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:49.392Z,1516722709.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:49.768Z,1516722709.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:49.790Z,1516722709.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:50.179Z,1516722710.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:50.199Z,1516722710.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:50.588Z,1516722710.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:50.603Z,1516722710.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:50.980Z,1516722710.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:51.007Z,1516722711.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:51.361Z,1516722711.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:51.396Z,1516722711.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:51.765Z,1516722711.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:51.794Z,1516722711.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:51.796Z,1516722711.796 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:51.796Z,1516722711.796 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 251 2018-01-23T15:51:51.796Z,1516722711.796 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:51:51.808Z,1516722711.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:51:52.162Z,1516722712.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:52.198Z,1516722712.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:52.222Z,1516722712.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:51:52.222Z,1516722712.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 251 2018-01-23T15:51:52.561Z,1516722712.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:52.576Z,1516722712.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:52.577Z,1516722712.577 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:51:52.578Z,1516722712.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:51:52.578Z,1516722712.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:51:52.975Z,1516722712.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:53.006Z,1516722713.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:53.379Z,1516722713.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:53.410Z,1516722713.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:53.783Z,1516722713.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:53.811Z,1516722713.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:54.172Z,1516722714.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:54.187Z,1516722714.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:54.571Z,1516722714.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:54.586Z,1516722714.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:54.968Z,1516722714.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:54.995Z,1516722714.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:55.374Z,1516722715.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:55.388Z,1516722715.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:55.770Z,1516722715.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:55.785Z,1516722715.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:56.179Z,1516722716.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:56.194Z,1516722716.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:56.578Z,1516722716.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:56.596Z,1516722716.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:56.979Z,1516722716.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:56.994Z,1516722716.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:57.374Z,1516722717.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:57.389Z,1516722717.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:57.769Z,1516722717.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:57.784Z,1516722717.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:58.168Z,1516722718.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:58.189Z,1516722718.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:58.565Z,1516722718.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:58.587Z,1516722718.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:58.978Z,1516722718.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:58.993Z,1516722718.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:59.379Z,1516722719.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:59.394Z,1516722719.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:51:59.779Z,1516722719.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:51:59.801Z,1516722719.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:00.173Z,1516722720.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:00.188Z,1516722720.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:00.574Z,1516722720.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:00.589Z,1516722720.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:00.968Z,1516722720.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:00.988Z,1516722720.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:01.370Z,1516722721.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:01.384Z,1516722721.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:01.774Z,1516722721.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:01.789Z,1516722721.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:02.179Z,1516722722.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:02.194Z,1516722722.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:02.578Z,1516722722.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:02.600Z,1516722722.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:02.979Z,1516722722.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:02.994Z,1516722722.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:03.368Z,1516722723.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:03.387Z,1516722723.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:03.769Z,1516722723.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:03.784Z,1516722723.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:04.171Z,1516722724.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:04.186Z,1516722724.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:04.564Z,1516722724.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:04.587Z,1516722724.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:04.977Z,1516722724.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:04.998Z,1516722724.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:04.998Z,1516722724.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 251 2018-01-23T15:52:04.998Z,1516722724.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:52:04.000Z,1516722725.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:04.000Z,1516722725.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 251 2018-01-23T15:52:04.000Z,1516722725.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:52:05.028Z,1516722725.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:52:05.029Z,1516722725.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:52:05.384Z,1516722725.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:05.410Z,1516722725.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:52:05.410Z,1516722725.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 251 2018-01-23T15:52:05.411Z,1516722725.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:52:05.411Z,1516722725.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 251 2018-01-23T15:52:05.780Z,1516722725.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:05.794Z,1516722725.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:52:05.794Z,1516722725.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:52:05.794Z,1516722725.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:52:05.795Z,1516722725.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:52:05.795Z,1516722725.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:52:05.796Z,1516722725.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:52:06.160Z,1516722726.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:06.196Z,1516722726.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:52:06.196Z,1516722726.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:06.561Z,1516722726.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:06.597Z,1516722726.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:52:06.598Z,1516722726.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:06.965Z,1516722726.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:06.991Z,1516722726.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:52:06.992Z,1516722726.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:07.377Z,1516722727.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:07.392Z,1516722727.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:52:07.393Z,1516722727.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:07.761Z,1516722727.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:07.788Z,1516722727.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:52:07.789Z,1516722727.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:08.176Z,1516722728.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:08.206Z,1516722728.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:52:08.207Z,1516722728.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:08.583Z,1516722728.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:08.597Z,1516722728.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:52:08.598Z,1516722728.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:08.980Z,1516722728.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:08.995Z,1516722728.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:52:08.996Z,1516722728.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:09.361Z,1516722729.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:09.393Z,1516722729.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:52:09.394Z,1516722729.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:09.760Z,1516722729.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:09.795Z,1516722729.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:52:09.796Z,1516722729.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:10.166Z,1516722730.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:10.193Z,1516722730.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:52:10.194Z,1516722730.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:10.561Z,1516722730.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:10.593Z,1516722730.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:52:10.594Z,1516722730.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:10.978Z,1516722730.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:11.001Z,1516722731.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:52:11.002Z,1516722731.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:11.388Z,1516722731.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:11.403Z,1516722731.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:52:11.404Z,1516722731.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:11.780Z,1516722731.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:11.794Z,1516722731.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:52:11.795Z,1516722731.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:12.161Z,1516722732.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:12.195Z,1516722732.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:52:12.196Z,1516722732.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:12.561Z,1516722732.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:12.598Z,1516722732.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:52:12.599Z,1516722732.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:12.972Z,1516722732.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:12.994Z,1516722732.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:52:12.996Z,1516722732.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:13.361Z,1516722733.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:13.392Z,1516722733.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:52:13.393Z,1516722733.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:13.765Z,1516722733.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:13.792Z,1516722733.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:52:13.793Z,1516722733.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:14.178Z,1516722734.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:14.201Z,1516722734.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:52:14.201Z,1516722734.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:14.587Z,1516722734.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:14.602Z,1516722734.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:52:14.603Z,1516722734.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:14.988Z,1516722734.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:15.003Z,1516722735.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:52:15.004Z,1516722735.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:15.361Z,1516722735.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:15.393Z,1516722735.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:52:15.394Z,1516722735.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:15.761Z,1516722735.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:15.796Z,1516722735.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:52:15.797Z,1516722735.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:16.162Z,1516722736.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:16.193Z,1516722736.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:52:16.194Z,1516722736.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:16.561Z,1516722736.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:16.592Z,1516722736.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:52:16.593Z,1516722736.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:16.984Z,1516722736.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:16.999Z,1516722736.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:52:16.000Z,1516722737.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:17.388Z,1516722737.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:17.403Z,1516722737.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:52:17.404Z,1516722737.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:17.771Z,1516722737.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:17.805Z,1516722737.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:52:17.806Z,1516722737.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:18.160Z,1516722738.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:18.196Z,1516722738.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:52:18.197Z,1516722738.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:18.561Z,1516722738.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:18.588Z,1516722738.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:52:18.589Z,1516722738.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:18.961Z,1516722738.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:18.996Z,1516722738.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:52:18.997Z,1516722738.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:19.365Z,1516722739.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:19.380Z,1516722739.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:52:19.381Z,1516722739.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:19.765Z,1516722739.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:19.780Z,1516722739.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:52:19.781Z,1516722739.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:20.179Z,1516722740.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:20.212Z,1516722740.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:52:20.213Z,1516722740.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:20.579Z,1516722740.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:20.614Z,1516722740.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:52:20.615Z,1516722740.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:20.979Z,1516722740.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:21.010Z,1516722741.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:52:21.011Z,1516722741.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:21.368Z,1516722741.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:21.386Z,1516722741.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:52:21.388Z,1516722741.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:21.766Z,1516722741.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:21.791Z,1516722741.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:52:21.792Z,1516722741.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:22.167Z,1516722742.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:22.186Z,1516722742.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:52:22.191Z,1516722742.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:22.565Z,1516722742.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:22.588Z,1516722742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:52:22.588Z,1516722742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:22.974Z,1516722742.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:22.989Z,1516722742.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:52:22.990Z,1516722742.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:23.376Z,1516722743.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:23.391Z,1516722743.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:52:23.392Z,1516722743.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:23.774Z,1516722743.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:23.789Z,1516722743.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:52:23.790Z,1516722743.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:24.169Z,1516722744.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:24.184Z,1516722744.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:52:24.185Z,1516722744.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:24.568Z,1516722744.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:24.590Z,1516722744.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:52:24.596Z,1516722744.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:24.975Z,1516722744.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:24.990Z,1516722744.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T15:52:24.991Z,1516722744.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:25.371Z,1516722745.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:25.386Z,1516722745.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:25.768Z,1516722745.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:25.789Z,1516722745.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:26.180Z,1516722746.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:26.195Z,1516722746.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:26.579Z,1516722746.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:26.600Z,1516722746.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:26.980Z,1516722746.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:26.996Z,1516722746.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:27.376Z,1516722747.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:27.391Z,1516722747.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:27.772Z,1516722747.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:27.787Z,1516722747.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:28.169Z,1516722748.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:28.192Z,1516722748.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:28.568Z,1516722748.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:28.589Z,1516722748.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:28.979Z,1516722748.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:28.995Z,1516722748.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:29.381Z,1516722749.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:29.396Z,1516722749.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:32.487Z,1516722752.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:32.503Z,1516722752.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:32.623Z,1516722752.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:32.657Z,1516722752.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:32.973Z,1516722752.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:32.989Z,1516722752.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:33.379Z,1516722753.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:33.393Z,1516722753.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:33.774Z,1516722753.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:33.789Z,1516722753.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:34.182Z,1516722754.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:34.197Z,1516722754.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:34.583Z,1516722754.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:34.597Z,1516722754.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:34.979Z,1516722754.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:34.998Z,1516722754.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:35.369Z,1516722755.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:35.392Z,1516722755.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:35.777Z,1516722755.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:35.792Z,1516722755.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:36.174Z,1516722756.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:36.197Z,1516722756.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:36.581Z,1516722756.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:36.596Z,1516722756.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:36.987Z,1516722756.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:37.002Z,1516722757.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:37.391Z,1516722757.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:37.406Z,1516722757.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:37.787Z,1516722757.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:37.809Z,1516722757.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:38.164Z,1516722758.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:38.192Z,1516722758.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:38.565Z,1516722758.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:38.597Z,1516722758.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:38.987Z,1516722758.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:39.002Z,1516722759.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:39.388Z,1516722759.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:39.402Z,1516722759.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:39.787Z,1516722759.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:39.802Z,1516722759.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:40.166Z,1516722760.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:40.202Z,1516722760.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:40.565Z,1516722760.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:40.601Z,1516722760.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:40.980Z,1516722760.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:41.007Z,1516722761.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:41.388Z,1516722761.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:41.403Z,1516722761.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:41.785Z,1516722761.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:41.812Z,1516722761.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:42.166Z,1516722762.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:42.192Z,1516722762.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:42.568Z,1516722762.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:42.601Z,1516722762.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:42.988Z,1516722762.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:43.003Z,1516722763.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:43.388Z,1516722763.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:43.403Z,1516722763.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:43.784Z,1516722763.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:43.805Z,1516722763.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:44.166Z,1516722764.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:44.194Z,1516722764.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:44.565Z,1516722764.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:44.592Z,1516722764.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:44.988Z,1516722764.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:45.003Z,1516722765.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:45.388Z,1516722765.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:45.408Z,1516722765.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:45.788Z,1516722765.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:45.803Z,1516722765.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:46.186Z,1516722766.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:46.201Z,1516722766.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:46.565Z,1516722766.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:46.604Z,1516722766.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:46.980Z,1516722766.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:47.011Z,1516722767.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:47.394Z,1516722767.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:47.409Z,1516722767.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:47.785Z,1516722767.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:47.812Z,1516722767.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:48.166Z,1516722768.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:48.192Z,1516722768.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:48.565Z,1516722768.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:48.591Z,1516722768.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:48.988Z,1516722768.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:49.003Z,1516722769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:49.388Z,1516722769.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:49.403Z,1516722769.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:49.788Z,1516722769.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:49.803Z,1516722769.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:50.169Z,1516722770.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:50.205Z,1516722770.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:50.565Z,1516722770.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:50.597Z,1516722770.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:50.984Z,1516722770.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:51.011Z,1516722771.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:51.389Z,1516722771.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:51.408Z,1516722771.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:51.775Z,1516722771.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:51.809Z,1516722771.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:52.166Z,1516722772.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:52.201Z,1516722772.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:52.565Z,1516722772.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:52.604Z,1516722772.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:52.975Z,1516722772.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:53.002Z,1516722773.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:53.379Z,1516722773.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:53.417Z,1516722773.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:53.783Z,1516722773.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:53.810Z,1516722773.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:54.173Z,1516722774.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:54.188Z,1516722774.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:54.570Z,1516722774.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:54.585Z,1516722774.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:54.983Z,1516722774.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:55.024Z,1516722775.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:55.387Z,1516722775.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:55.412Z,1516722775.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:55.787Z,1516722775.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:55.812Z,1516722775.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:56.178Z,1516722776.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:56.193Z,1516722776.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:56.571Z,1516722776.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:56.586Z,1516722776.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:56.983Z,1516722776.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:57.011Z,1516722777.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:57.391Z,1516722777.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:57.427Z,1516722777.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:57.783Z,1516722777.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:57.798Z,1516722777.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:58.172Z,1516722778.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:58.199Z,1516722778.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:58.565Z,1516722778.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:58.601Z,1516722778.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:58.988Z,1516722778.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:59.003Z,1516722779.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:59.384Z,1516722779.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:59.407Z,1516722779.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:52:59.793Z,1516722779.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:52:59.808Z,1516722779.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:00.166Z,1516722780.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:00.194Z,1516722780.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:00.565Z,1516722780.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:00.601Z,1516722780.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:00.987Z,1516722780.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:01.009Z,1516722781.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:01.384Z,1516722781.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:01.407Z,1516722781.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:01.783Z,1516722781.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:01.809Z,1516722781.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:02.166Z,1516722782.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:02.194Z,1516722782.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:02.565Z,1516722782.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:02.581Z,1516722782.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:02.984Z,1516722782.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:03.011Z,1516722783.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:03.379Z,1516722783.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:03.419Z,1516722783.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:03.779Z,1516722783.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:03.819Z,1516722783.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:04.173Z,1516722784.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:04.188Z,1516722784.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:04.576Z,1516722784.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:04.620Z,1516722784.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:04.983Z,1516722784.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:05.015Z,1516722785.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:05.391Z,1516722785.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:05.415Z,1516722785.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:05.787Z,1516722785.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:05.823Z,1516722785.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:06.172Z,1516722786.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:06.199Z,1516722786.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:06.584Z,1516722786.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:06.599Z,1516722786.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:06.993Z,1516722786.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:07.013Z,1516722787.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:07.395Z,1516722787.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:07.417Z,1516722787.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:07.788Z,1516722787.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:07.815Z,1516722787.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:08.166Z,1516722788.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:08.198Z,1516722788.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:08.565Z,1516722788.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:08.589Z,1516722788.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:08.980Z,1516722788.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:09.017Z,1516722789.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:09.384Z,1516722789.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:09.412Z,1516722789.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:09.784Z,1516722789.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:09.810Z,1516722789.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:10.177Z,1516722790.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:10.217Z,1516722790.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:10.570Z,1516722790.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:10.585Z,1516722790.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:10.983Z,1516722790.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:11.015Z,1516722791.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:11.383Z,1516722791.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:11.406Z,1516722791.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:11.783Z,1516722791.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:11.798Z,1516722791.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:12.170Z,1516722792.170 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:12.193Z,1516722792.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:12.574Z,1516722792.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:12.589Z,1516722792.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:12.974Z,1516722792.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:12.989Z,1516722792.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:13.379Z,1516722793.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:13.395Z,1516722793.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:13.779Z,1516722793.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:13.794Z,1516722793.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:14.179Z,1516722794.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:14.200Z,1516722794.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:14.573Z,1516722794.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:14.589Z,1516722794.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:14.982Z,1516722794.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:14.997Z,1516722794.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:15.373Z,1516722795.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:15.410Z,1516722795.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:15.765Z,1516722795.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:15.792Z,1516722795.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:16.186Z,1516722796.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:16.202Z,1516722796.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:16.591Z,1516722796.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:16.606Z,1516722796.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:16.987Z,1516722796.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:17.002Z,1516722797.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:17.385Z,1516722797.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:17.405Z,1516722797.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:17.765Z,1516722797.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:17.801Z,1516722797.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:18.165Z,1516722798.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:18.197Z,1516722798.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:18.566Z,1516722798.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:18.597Z,1516722798.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:18.977Z,1516722798.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:18.992Z,1516722798.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:19.387Z,1516722799.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:19.402Z,1516722799.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:19.786Z,1516722799.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:19.801Z,1516722799.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:20.188Z,1516722800.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:20.208Z,1516722800.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:20.565Z,1516722800.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:20.592Z,1516722800.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:20.972Z,1516722800.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:20.995Z,1516722800.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:21.378Z,1516722801.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:21.393Z,1516722801.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:21.765Z,1516722801.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:21.791Z,1516722801.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:22.187Z,1516722802.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:22.202Z,1516722802.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:22.588Z,1516722802.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:22.603Z,1516722802.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:22.987Z,1516722802.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:23.002Z,1516722803.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:23.365Z,1516722803.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:23.397Z,1516722803.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:23.777Z,1516722803.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:23.792Z,1516722803.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:24.165Z,1516722804.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:24.192Z,1516722804.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:24.566Z,1516722804.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:24.601Z,1516722804.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:24.965Z,1516722804.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:25.001Z,1516722805.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:25.387Z,1516722805.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:25.402Z,1516722805.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:25.787Z,1516722805.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:25.802Z,1516722805.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:26.188Z,1516722806.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:26.208Z,1516722806.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:26.565Z,1516722806.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:26.600Z,1516722806.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:26.965Z,1516722806.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:26.992Z,1516722806.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:27.387Z,1516722807.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:27.411Z,1516722807.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:27.766Z,1516722807.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:27.793Z,1516722807.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:28.187Z,1516722808.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:28.202Z,1516722808.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:28.588Z,1516722808.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:28.603Z,1516722808.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:28.986Z,1516722808.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:29.002Z,1516722809.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:29.366Z,1516722809.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:29.397Z,1516722809.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:32.531Z,1516722812.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:32.548Z,1516722812.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:32.646Z,1516722812.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:32.692Z,1516722812.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:33.011Z,1516722813.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:33.036Z,1516722813.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:33.415Z,1516722813.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:33.441Z,1516722813.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:33.807Z,1516722813.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:33.839Z,1516722813.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:34.194Z,1516722814.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:34.217Z,1516722814.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:34.598Z,1516722814.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:34.613Z,1516722814.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:34.996Z,1516722814.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:35.012Z,1516722815.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:35.415Z,1516722815.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:35.447Z,1516722815.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:35.807Z,1516722815.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:35.822Z,1516722815.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:36.206Z,1516722816.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:36.221Z,1516722816.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:36.597Z,1516722816.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:36.612Z,1516722816.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:36.997Z,1516722816.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:37.012Z,1516722817.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:37.393Z,1516722817.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:37.416Z,1516722817.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:37.797Z,1516722817.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:37.812Z,1516722817.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:38.208Z,1516722818.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:38.223Z,1516722818.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:38.606Z,1516722818.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:38.621Z,1516722818.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:39.007Z,1516722819.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:39.022Z,1516722819.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:39.398Z,1516722819.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:39.413Z,1516722819.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:39.797Z,1516722819.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:39.812Z,1516722819.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:40.206Z,1516722820.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:40.221Z,1516722820.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:40.599Z,1516722820.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:40.614Z,1516722820.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:40.993Z,1516722820.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:41.016Z,1516722821.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:41.408Z,1516722821.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:41.423Z,1516722821.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:41.812Z,1516722821.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:41.826Z,1516722821.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:42.207Z,1516722822.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:42.228Z,1516722822.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:42.592Z,1516722822.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:42.623Z,1516722822.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:42.988Z,1516722822.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:43.025Z,1516722823.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:43.402Z,1516722823.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:43.417Z,1516722823.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:43.788Z,1516722823.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:43.822Z,1516722823.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:44.205Z,1516722824.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:44.228Z,1516722824.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:44.612Z,1516722824.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:44.627Z,1516722824.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:45.015Z,1516722825.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:45.030Z,1516722825.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:45.389Z,1516722825.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:45.422Z,1516722825.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:45.789Z,1516722825.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:45.825Z,1516722825.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:46.192Z,1516722826.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:46.219Z,1516722826.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:46.589Z,1516722826.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:46.623Z,1516722826.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:46.990Z,1516722826.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:47.018Z,1516722827.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:47.417Z,1516722827.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:47.433Z,1516722827.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:47.813Z,1516722827.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:47.828Z,1516722827.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:48.208Z,1516722828.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:48.227Z,1516722828.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:48.590Z,1516722828.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:48.628Z,1516722828.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:48.990Z,1516722828.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:49.029Z,1516722829.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:49.395Z,1516722829.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:49.426Z,1516722829.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:49.788Z,1516722829.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:49.829Z,1516722829.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:50.209Z,1516722830.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:50.237Z,1516722830.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:50.604Z,1516722830.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:50.636Z,1516722830.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:51.013Z,1516722831.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:51.045Z,1516722831.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:51.394Z,1516722831.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:51.414Z,1516722831.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:51.796Z,1516722831.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:51.840Z,1516722831.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:52.193Z,1516722832.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:52.209Z,1516722832.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:52.594Z,1516722832.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:52.609Z,1516722832.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:52.990Z,1516722832.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:53.014Z,1516722833.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:53.399Z,1516722833.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:53.415Z,1516722833.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:53.803Z,1516722833.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:53.824Z,1516722833.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:54.199Z,1516722834.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:54.214Z,1516722834.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:54.594Z,1516722834.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:54.617Z,1516722834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:55.002Z,1516722835.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:55.016Z,1516722835.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:55.393Z,1516722835.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:55.416Z,1516722835.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:55.792Z,1516722835.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:55.814Z,1516722835.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:56.207Z,1516722836.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:56.222Z,1516722836.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:56.606Z,1516722836.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:56.621Z,1516722836.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:57.007Z,1516722837.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:57.029Z,1516722837.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:57.402Z,1516722837.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:57.416Z,1516722837.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:57.796Z,1516722837.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:57.811Z,1516722837.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:58.192Z,1516722838.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:58.217Z,1516722838.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:58.598Z,1516722838.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:58.613Z,1516722838.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:58.988Z,1516722838.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:59.021Z,1516722839.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:59.404Z,1516722839.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:59.431Z,1516722839.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:53:59.811Z,1516722839.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:53:59.826Z,1516722839.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:00.204Z,1516722840.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:00.234Z,1516722840.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:00.588Z,1516722840.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:00.614Z,1516722840.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:00.987Z,1516722840.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:01.023Z,1516722841.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:01.393Z,1516722841.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:01.420Z,1516722841.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:01.788Z,1516722841.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:01.814Z,1516722841.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:02.172Z,1516722842.172 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T15:54:02.172Z,1516722842.172 [NAL9602] Data Fault, FailCount= 4 2018-01-23T15:54:02.172Z,1516722842.172 [NAL9602](ERROR): Data Fault 2018-01-23T15:54:02.189Z,1516722842.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:02.223Z,1516722842.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:02.249Z,1516722842.249 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T15:54:02.572Z,1516722842.572 [NAL9602](INFO): Powering down 2018-01-23T15:54:02.589Z,1516722842.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:02.616Z,1516722842.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:02.988Z,1516722842.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:03.025Z,1516722843.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:03.388Z,1516722843.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:03.403Z,1516722843.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:03.444Z,1516722843.444 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T15:54:03.444Z,1516722843.444 [NAL9602] No Fault, FailCount= 4 2018-01-23T15:54:03.793Z,1516722843.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:03.808Z,1516722843.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:04.193Z,1516722844.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:04.208Z,1516722844.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:04.588Z,1516722844.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:04.623Z,1516722844.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:04.985Z,1516722844.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:05.012Z,1516722845.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:05.388Z,1516722845.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:05.421Z,1516722845.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:05.788Z,1516722845.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:05.825Z,1516722845.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:06.185Z,1516722846.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:06.209Z,1516722846.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:06.588Z,1516722846.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:06.621Z,1516722846.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:06.992Z,1516722846.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:07.032Z,1516722847.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:07.392Z,1516722847.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:07.427Z,1516722847.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:07.788Z,1516722847.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:07.809Z,1516722847.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:08.196Z,1516722848.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:08.211Z,1516722848.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:08.596Z,1516722848.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:08.611Z,1516722848.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:08.996Z,1516722848.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:09.017Z,1516722849.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:09.395Z,1516722849.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:09.410Z,1516722849.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:09.793Z,1516722849.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:09.809Z,1516722849.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:10.193Z,1516722850.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:10.212Z,1516722850.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:10.595Z,1516722850.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:10.610Z,1516722850.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:10.994Z,1516722850.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:11.009Z,1516722851.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:11.392Z,1516722851.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:11.419Z,1516722851.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:11.799Z,1516722851.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:11.814Z,1516722851.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:12.194Z,1516722852.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:12.209Z,1516722852.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:12.590Z,1516722852.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:12.613Z,1516722852.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:12.996Z,1516722852.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:13.011Z,1516722853.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:13.394Z,1516722853.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:13.409Z,1516722853.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:13.790Z,1516722853.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:13.817Z,1516722853.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:14.200Z,1516722854.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:14.215Z,1516722854.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:14.588Z,1516722854.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:14.615Z,1516722854.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:14.988Z,1516722854.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:15.024Z,1516722855.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:15.400Z,1516722855.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:15.415Z,1516722855.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:15.800Z,1516722855.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:15.816Z,1516722855.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:16.188Z,1516722856.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:16.224Z,1516722856.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:16.588Z,1516722856.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:16.615Z,1516722856.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:16.985Z,1516722856.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:17.021Z,1516722857.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:17.392Z,1516722857.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:17.419Z,1516722857.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:17.788Z,1516722857.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:17.817Z,1516722857.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:18.185Z,1516722858.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:18.220Z,1516722858.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:18.596Z,1516722858.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:18.623Z,1516722858.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:18.988Z,1516722858.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:19.022Z,1516722859.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:19.392Z,1516722859.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:19.420Z,1516722859.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:19.789Z,1516722859.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:19.825Z,1516722859.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:20.188Z,1516722860.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:20.226Z,1516722860.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:20.592Z,1516722860.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:20.620Z,1516722860.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:20.987Z,1516722860.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:21.019Z,1516722861.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:21.388Z,1516722861.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:21.427Z,1516722861.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:21.785Z,1516722861.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:21.800Z,1516722861.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:22.188Z,1516722862.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:22.209Z,1516722862.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:22.594Z,1516722862.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:22.609Z,1516722862.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:22.991Z,1516722862.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:23.006Z,1516722863.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:23.400Z,1516722863.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:23.421Z,1516722863.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:23.796Z,1516722863.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:23.811Z,1516722863.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:24.195Z,1516722864.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:24.210Z,1516722864.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:24.596Z,1516722864.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:24.615Z,1516722864.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:24.996Z,1516722864.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:25.013Z,1516722865.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:25.397Z,1516722865.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:25.412Z,1516722865.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:25.794Z,1516722865.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:25.814Z,1516722865.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:26.197Z,1516722866.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:26.212Z,1516722866.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:26.599Z,1516722866.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:26.614Z,1516722866.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:26.993Z,1516722866.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:27.016Z,1516722867.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:27.402Z,1516722867.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:27.416Z,1516722867.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:27.800Z,1516722867.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:27.815Z,1516722867.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:28.194Z,1516722868.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:28.217Z,1516722868.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:28.598Z,1516722868.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:28.613Z,1516722868.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:28.616Z,1516722868.616 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:49:28.2Z 2018-01-23T15:54:28.616Z,1516722868.616 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T15:54:28.617Z,1516722868.617 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T15:54:28.998Z,1516722868.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:29.013Z,1516722869.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:29.527Z,1516722869.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:29.552Z,1516722869.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:32.482Z,1516722872.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:32.505Z,1516722872.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:32.588Z,1516722872.588 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0296.lzma 2018-01-23T15:54:32.592Z,1516722872.592 [NAL9602](INFO): Powering up NAL9602 2018-01-23T15:54:32.609Z,1516722872.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:32.625Z,1516722872.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:32.956Z,1516722872.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:32.983Z,1516722872.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:33.008Z,1516722873.008 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T15:54:33.330Z,1516722873.330 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0296.lzma.bak 2018-01-23T15:54:33.330Z,1516722873.330 [DataOverHttps](INFO): SBD MOMSN=7755817 2018-01-23T15:54:33.371Z,1516722873.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:33.386Z,1516722873.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:34.003Z,1516722874.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:34.018Z,1516722874.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:34.153Z,1516722874.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:34.188Z,1516722874.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:37.348Z,1516722877.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:37.367Z,1516722877.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:37.460Z,1516722877.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:37.476Z,1516722877.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:37.813Z,1516722877.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:37.836Z,1516722877.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:38.219Z,1516722878.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:38.234Z,1516722878.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:38.614Z,1516722878.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:38.630Z,1516722878.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:39.015Z,1516722879.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:39.030Z,1516722879.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:42.134Z,1516722882.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:42.163Z,1516722882.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:42.239Z,1516722882.239 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0297.lzma 2018-01-23T15:54:42.270Z,1516722882.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:42.285Z,1516722882.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:42.612Z,1516722882.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:42.639Z,1516722882.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:42.990Z,1516722882.990 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0297.lzma.bak 2018-01-23T15:54:42.990Z,1516722882.990 [DataOverHttps](INFO): SBD MOMSN=7755819 2018-01-23T15:54:43.029Z,1516722883.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:43.044Z,1516722883.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:43.672Z,1516722883.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:43.693Z,1516722883.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:43.696Z,1516722883.696 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T15:54:43.696Z,1516722883.696 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T15:54:43.696Z,1516722883.696 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T15:54:43.792Z,1516722883.792 [NAL9602](INFO): NAL9602 initialized 2018-01-23T15:54:43.819Z,1516722883.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:43.840Z,1516722883.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:46.963Z,1516722886.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:46.983Z,1516722886.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:47.087Z,1516722887.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:47.119Z,1516722887.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:47.444Z,1516722887.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:47.475Z,1516722887.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:47.848Z,1516722887.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:47.878Z,1516722887.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:48.226Z,1516722888.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:48.250Z,1516722888.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:48.630Z,1516722888.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:48.649Z,1516722888.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:49.032Z,1516722889.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:49.047Z,1516722889.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:49.444Z,1516722889.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:49.475Z,1516722889.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:49.839Z,1516722889.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:49.861Z,1516722889.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:50.239Z,1516722890.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:50.260Z,1516722890.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:50.630Z,1516722890.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:50.646Z,1516722890.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:51.028Z,1516722891.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:51.057Z,1516722891.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:51.431Z,1516722891.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:51.456Z,1516722891.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:51.832Z,1516722891.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:51.851Z,1516722891.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:52.232Z,1516722892.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:52.248Z,1516722892.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:52.639Z,1516722892.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:52.660Z,1516722892.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:52.663Z,1516722892.663 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:52.663Z,1516722892.663 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 252 2018-01-23T15:54:52.663Z,1516722892.663 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:54:52.715Z,1516722892.715 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:54:53.042Z,1516722893.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:53.058Z,1516722893.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:53.082Z,1516722893.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:54:53.082Z,1516722893.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 252 2018-01-23T15:54:53.443Z,1516722893.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:53.458Z,1516722893.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:53.459Z,1516722893.459 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:54:53.460Z,1516722893.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:54:53.460Z,1516722893.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:54:53.833Z,1516722893.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:53.853Z,1516722893.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:54.229Z,1516722894.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:54.249Z,1516722894.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:54.628Z,1516722894.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:54.655Z,1516722894.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:55.028Z,1516722895.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:55.055Z,1516722895.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:55.444Z,1516722895.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:55.459Z,1516722895.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:55.847Z,1516722895.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:55.862Z,1516722895.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:56.251Z,1516722896.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:56.272Z,1516722896.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:56.622Z,1516722896.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:56.661Z,1516722896.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:57.028Z,1516722897.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:57.054Z,1516722897.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:57.425Z,1516722897.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:57.460Z,1516722897.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:57.823Z,1516722897.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:57.838Z,1516722897.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:58.232Z,1516722898.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:58.269Z,1516722898.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:58.635Z,1516722898.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:58.667Z,1516722898.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:59.039Z,1516722899.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:59.071Z,1516722899.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:59.447Z,1516722899.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:59.472Z,1516722899.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:54:59.834Z,1516722899.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:54:59.849Z,1516722899.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:00.230Z,1516722900.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:00.245Z,1516722900.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:00.630Z,1516722900.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:00.649Z,1516722900.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:01.034Z,1516722901.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:01.049Z,1516722901.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:01.447Z,1516722901.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:01.462Z,1516722901.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:01.851Z,1516722901.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:01.866Z,1516722901.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:02.243Z,1516722902.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:02.259Z,1516722902.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:02.633Z,1516722902.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:02.648Z,1516722902.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:03.042Z,1516722903.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:03.057Z,1516722903.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:03.433Z,1516722903.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:03.449Z,1516722903.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:03.828Z,1516722903.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:03.855Z,1516722903.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:04.228Z,1516722904.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:04.251Z,1516722904.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:04.649Z,1516722904.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:04.689Z,1516722904.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:05.046Z,1516722905.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:05.061Z,1516722905.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:05.443Z,1516722905.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:05.458Z,1516722905.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:05.833Z,1516722905.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:05.853Z,1516722905.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:05.853Z,1516722905.853 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 252 2018-01-23T15:55:05.853Z,1516722905.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:55:05.855Z,1516722905.855 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:05.855Z,1516722905.855 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 252 2018-01-23T15:55:05.855Z,1516722905.855 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:55:05.868Z,1516722905.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:55:05.868Z,1516722905.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:55:06.232Z,1516722906.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:06.283Z,1516722906.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:55:06.283Z,1516722906.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 252 2018-01-23T15:55:06.283Z,1516722906.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:55:06.284Z,1516722906.284 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 252 2018-01-23T15:55:06.645Z,1516722906.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:06.660Z,1516722906.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:55:06.660Z,1516722906.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:55:06.660Z,1516722906.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:55:06.661Z,1516722906.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:55:06.661Z,1516722906.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:55:06.661Z,1516722906.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:55:07.025Z,1516722907.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:07.060Z,1516722907.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:55:07.061Z,1516722907.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:07.448Z,1516722907.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:07.462Z,1516722907.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:55:07.463Z,1516722907.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:07.845Z,1516722907.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:07.874Z,1516722907.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:55:07.875Z,1516722907.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:08.252Z,1516722908.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:08.272Z,1516722908.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:55:08.273Z,1516722908.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:08.624Z,1516722908.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:08.657Z,1516722908.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:55:08.658Z,1516722908.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:09.024Z,1516722909.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:09.060Z,1516722909.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:55:09.061Z,1516722909.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:09.434Z,1516722909.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:09.462Z,1516722909.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:55:09.463Z,1516722909.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:09.830Z,1516722909.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:09.861Z,1516722909.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:55:09.862Z,1516722909.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:10.233Z,1516722910.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:10.266Z,1516722910.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:55:10.267Z,1516722910.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:10.635Z,1516722910.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:10.673Z,1516722910.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:55:10.673Z,1516722910.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:11.040Z,1516722911.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:11.066Z,1516722911.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:55:11.068Z,1516722911.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:11.461Z,1516722911.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:11.476Z,1516722911.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:55:11.477Z,1516722911.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:11.829Z,1516722911.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:11.845Z,1516722911.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:55:11.846Z,1516722911.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:12.233Z,1516722912.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:12.273Z,1516722912.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:55:12.274Z,1516722912.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:12.640Z,1516722912.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:12.675Z,1516722912.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:55:12.676Z,1516722912.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:13.033Z,1516722913.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:13.049Z,1516722913.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:55:13.050Z,1516722913.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:13.444Z,1516722913.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:13.480Z,1516722913.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:55:13.481Z,1516722913.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:13.844Z,1516722913.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:13.871Z,1516722913.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:55:13.872Z,1516722913.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:14.238Z,1516722914.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:14.253Z,1516722914.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:55:14.254Z,1516722914.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:14.630Z,1516722914.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:14.661Z,1516722914.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:55:14.662Z,1516722914.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:15.037Z,1516722915.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:15.052Z,1516722915.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:55:15.053Z,1516722915.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:15.433Z,1516722915.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:15.448Z,1516722915.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:55:15.449Z,1516722915.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:15.842Z,1516722915.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:15.860Z,1516722915.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:55:15.861Z,1516722915.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:16.235Z,1516722916.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:16.250Z,1516722916.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:55:16.251Z,1516722916.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:16.642Z,1516722916.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:16.657Z,1516722916.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:55:16.658Z,1516722916.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:17.041Z,1516722917.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:17.060Z,1516722917.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:55:17.061Z,1516722917.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:17.445Z,1516722917.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:17.460Z,1516722917.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:55:17.461Z,1516722917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:17.835Z,1516722917.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:17.850Z,1516722917.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:55:17.851Z,1516722917.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:18.237Z,1516722918.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:18.256Z,1516722918.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:55:18.257Z,1516722918.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:18.644Z,1516722918.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:18.659Z,1516722918.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:55:18.660Z,1516722918.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:19.037Z,1516722919.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:19.051Z,1516722919.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:55:19.052Z,1516722919.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:19.440Z,1516722919.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:19.467Z,1516722919.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:55:19.468Z,1516722919.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:19.847Z,1516722919.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:19.861Z,1516722919.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:55:19.862Z,1516722919.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:20.251Z,1516722920.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:20.265Z,1516722920.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:55:20.266Z,1516722920.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:20.640Z,1516722920.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:20.654Z,1516722920.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:55:20.655Z,1516722920.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:21.027Z,1516722921.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:21.061Z,1516722921.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:55:21.062Z,1516722921.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:21.436Z,1516722921.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:21.451Z,1516722921.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:55:21.452Z,1516722921.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:21.836Z,1516722921.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:21.855Z,1516722921.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:55:21.856Z,1516722921.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:22.224Z,1516722922.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:22.260Z,1516722922.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:55:22.261Z,1516722922.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:22.645Z,1516722922.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:22.660Z,1516722922.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:55:22.661Z,1516722922.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:23.047Z,1516722923.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:23.062Z,1516722923.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:55:23.063Z,1516722923.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:23.454Z,1516722923.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:23.469Z,1516722923.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:55:23.470Z,1516722923.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:23.824Z,1516722923.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:23.860Z,1516722923.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:55:23.861Z,1516722923.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:24.226Z,1516722924.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:24.264Z,1516722924.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:55:24.265Z,1516722924.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:24.629Z,1516722924.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:24.664Z,1516722924.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:55:24.665Z,1516722924.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:25.029Z,1516722925.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:25.061Z,1516722925.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:55:25.062Z,1516722925.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:25.450Z,1516722925.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:25.465Z,1516722925.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:55:25.466Z,1516722925.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:25.845Z,1516722925.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:25.867Z,1516722925.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:26.236Z,1516722926.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:26.265Z,1516722926.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:26.627Z,1516722926.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:26.654Z,1516722926.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:27.024Z,1516722927.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:27.072Z,1516722927.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:27.426Z,1516722927.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:27.466Z,1516722927.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:27.831Z,1516722927.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:27.862Z,1516722927.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:28.234Z,1516722928.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:28.363Z,1516722928.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:28.641Z,1516722928.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:28.671Z,1516722928.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:29.045Z,1516722929.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:29.071Z,1516722929.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:29.437Z,1516722929.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:29.468Z,1516722929.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:29.827Z,1516722929.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:29.842Z,1516722929.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:30.228Z,1516722930.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:30.272Z,1516722930.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:30.640Z,1516722930.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:30.675Z,1516722930.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:31.035Z,1516722931.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:31.050Z,1516722931.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:31.443Z,1516722931.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:31.475Z,1516722931.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:31.839Z,1516722931.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:31.884Z,1516722931.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:32.236Z,1516722932.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:32.246Z,1516722932.246 [PNI_TCM](ERROR): CRC does not match. Expected:0x42825 got:0x60364 2018-01-23T15:55:32.279Z,1516722932.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:32.636Z,1516722932.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:32.657Z,1516722932.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:33.035Z,1516722933.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:33.050Z,1516722933.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:33.433Z,1516722933.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:33.461Z,1516722933.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:33.832Z,1516722933.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:33.854Z,1516722933.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:34.239Z,1516722934.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:34.254Z,1516722934.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:34.643Z,1516722934.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:34.658Z,1516722934.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:35.040Z,1516722935.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:35.076Z,1516722935.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:35.438Z,1516722935.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:35.451Z,1516722935.451 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T15:55:35.483Z,1516722935.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:35.836Z,1516722935.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:35.851Z,1516722935.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:36.236Z,1516722936.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:36.251Z,1516722936.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:36.634Z,1516722936.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:36.674Z,1516722936.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:37.033Z,1516722937.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:37.052Z,1516722937.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:37.440Z,1516722937.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:37.461Z,1516722937.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:37.844Z,1516722937.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:37.865Z,1516722937.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:38.243Z,1516722938.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:38.269Z,1516722938.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:38.637Z,1516722938.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:38.656Z,1516722938.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:39.042Z,1516722939.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:39.057Z,1516722939.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:39.437Z,1516722939.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:39.452Z,1516722939.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:39.833Z,1516722939.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:39.869Z,1516722939.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:40.226Z,1516722940.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:40.256Z,1516722940.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:40.650Z,1516722940.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:40.665Z,1516722940.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:41.049Z,1516722941.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:41.069Z,1516722941.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:41.444Z,1516722941.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:41.488Z,1516722941.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:41.824Z,1516722941.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:41.857Z,1516722941.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:42.224Z,1516722942.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:42.261Z,1516722942.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:42.625Z,1516722942.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:42.658Z,1516722942.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:43.024Z,1516722943.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:43.063Z,1516722943.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:43.443Z,1516722943.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:43.463Z,1516722943.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:43.852Z,1516722943.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:43.873Z,1516722943.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:44.251Z,1516722944.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:44.266Z,1516722944.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:47.325Z,1516722947.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:47.353Z,1516722947.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:47.452Z,1516722947.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:47.467Z,1516722947.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:47.823Z,1516722947.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:47.849Z,1516722947.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:48.219Z,1516722948.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:48.255Z,1516722948.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:48.624Z,1516722948.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:48.659Z,1516722948.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:49.011Z,1516722949.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:49.026Z,1516722949.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:49.406Z,1516722949.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:49.422Z,1516722949.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:49.802Z,1516722949.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:49.833Z,1516722949.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:50.205Z,1516722950.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:50.221Z,1516722950.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:50.616Z,1516722950.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:50.632Z,1516722950.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:51.015Z,1516722951.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:51.031Z,1516722951.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:51.412Z,1516722951.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:51.438Z,1516722951.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:51.809Z,1516722951.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:51.825Z,1516722951.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:52.209Z,1516722952.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:52.225Z,1516722952.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:52.610Z,1516722952.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:52.633Z,1516722952.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:53.009Z,1516722953.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:53.024Z,1516722953.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:53.415Z,1516722953.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:53.430Z,1516722953.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:53.818Z,1516722953.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:53.833Z,1516722953.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:54.216Z,1516722954.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:54.233Z,1516722954.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:54.601Z,1516722954.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:54.623Z,1516722954.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:55.003Z,1516722955.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:55.018Z,1516722955.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:55.406Z,1516722955.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:55.428Z,1516722955.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:55.804Z,1516722955.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:55.824Z,1516722955.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:56.203Z,1516722956.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:56.226Z,1516722956.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:56.614Z,1516722956.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:56.635Z,1516722956.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:57.019Z,1516722957.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:57.034Z,1516722957.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:57.412Z,1516722957.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:57.442Z,1516722957.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:57.796Z,1516722957.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:57.825Z,1516722957.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:58.197Z,1516722958.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:58.223Z,1516722958.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:58.597Z,1516722958.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:58.629Z,1516722958.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:58.996Z,1516722958.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:59.030Z,1516722959.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:59.419Z,1516722959.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:59.434Z,1516722959.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:55:59.816Z,1516722959.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:55:59.843Z,1516722959.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:00.219Z,1516722960.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:00.234Z,1516722960.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:00.597Z,1516722960.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:00.633Z,1516722960.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:00.996Z,1516722960.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:01.032Z,1516722961.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:01.406Z,1516722961.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:01.450Z,1516722961.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:01.823Z,1516722961.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:01.838Z,1516722961.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:02.207Z,1516722962.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:02.241Z,1516722962.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:02.597Z,1516722962.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:02.634Z,1516722962.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:03.001Z,1516722963.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:03.032Z,1516722963.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:03.407Z,1516722963.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:03.444Z,1516722963.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:03.819Z,1516722963.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:03.843Z,1516722963.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:04.207Z,1516722964.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:04.242Z,1516722964.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:04.597Z,1516722964.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:04.632Z,1516722964.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:04.996Z,1516722964.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:05.034Z,1516722965.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:05.419Z,1516722965.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:05.434Z,1516722965.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:05.819Z,1516722965.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:05.837Z,1516722965.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:06.207Z,1516722966.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:06.237Z,1516722966.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:06.598Z,1516722966.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:06.632Z,1516722966.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:06.996Z,1516722966.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:07.033Z,1516722967.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:07.411Z,1516722967.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:07.439Z,1516722967.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:07.815Z,1516722967.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:07.842Z,1516722967.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:08.207Z,1516722968.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:08.234Z,1516722968.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:08.605Z,1516722968.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:08.620Z,1516722968.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:09.005Z,1516722969.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:09.041Z,1516722969.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:09.415Z,1516722969.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:09.446Z,1516722969.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:09.815Z,1516722969.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:09.830Z,1516722969.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:10.208Z,1516722970.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:10.223Z,1516722970.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:10.604Z,1516722970.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:10.619Z,1516722970.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:11.004Z,1516722971.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:11.030Z,1516722971.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:11.419Z,1516722971.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:11.451Z,1516722971.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:11.823Z,1516722971.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:11.838Z,1516722971.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:12.215Z,1516722972.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:12.230Z,1516722972.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:12.610Z,1516722972.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:12.626Z,1516722972.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:12.998Z,1516722972.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:13.029Z,1516722973.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:13.419Z,1516722973.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:13.434Z,1516722973.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:13.822Z,1516722973.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:13.837Z,1516722973.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:14.216Z,1516722974.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:14.231Z,1516722974.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:14.597Z,1516722974.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:14.634Z,1516722974.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:14.997Z,1516722974.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:15.032Z,1516722975.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:15.423Z,1516722975.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:15.438Z,1516722975.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:15.823Z,1516722975.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:15.837Z,1516722975.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:16.219Z,1516722976.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:16.234Z,1516722976.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:16.598Z,1516722976.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:16.624Z,1516722976.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:16.997Z,1516722976.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:17.030Z,1516722977.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:17.412Z,1516722977.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:17.434Z,1516722977.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:17.820Z,1516722977.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:17.835Z,1516722977.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:18.216Z,1516722978.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:18.231Z,1516722978.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:18.598Z,1516722978.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:18.625Z,1516722978.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:19.004Z,1516722979.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:19.036Z,1516722979.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:19.416Z,1516722979.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:19.436Z,1516722979.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:19.822Z,1516722979.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:19.837Z,1516722979.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:20.215Z,1516722980.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:20.231Z,1516722980.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:20.608Z,1516722980.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:20.670Z,1516722980.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:21.021Z,1516722981.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:21.036Z,1516722981.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:21.420Z,1516722981.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:21.444Z,1516722981.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:21.826Z,1516722981.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:21.845Z,1516722981.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:22.231Z,1516722982.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:22.254Z,1516722982.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:22.603Z,1516722982.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:22.641Z,1516722982.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:23.006Z,1516722983.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:23.029Z,1516722983.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:23.435Z,1516722983.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:23.483Z,1516722983.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:23.824Z,1516722983.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:23.845Z,1516722983.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:24.207Z,1516722984.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:24.241Z,1516722984.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:24.602Z,1516722984.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:24.632Z,1516722984.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:24.997Z,1516722984.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:25.029Z,1516722985.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:25.408Z,1516722985.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:25.443Z,1516722985.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:25.812Z,1516722985.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:25.865Z,1516722985.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:26.243Z,1516722986.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:26.265Z,1516722986.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:26.602Z,1516722986.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:26.618Z,1516722986.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:27.012Z,1516722987.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:27.055Z,1516722987.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:27.436Z,1516722987.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:27.464Z,1516722987.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:27.826Z,1516722987.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:27.852Z,1516722987.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:28.218Z,1516722988.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:28.270Z,1516722988.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:28.640Z,1516722988.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:28.675Z,1516722988.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:29.007Z,1516722989.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:29.039Z,1516722989.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:29.426Z,1516722989.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:29.497Z,1516722989.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:29.822Z,1516722989.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:29.861Z,1516722989.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:30.226Z,1516722990.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:30.272Z,1516722990.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:30.606Z,1516722990.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:30.661Z,1516722990.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:31.010Z,1516722991.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:31.038Z,1516722991.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:31.427Z,1516722991.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:31.486Z,1516722991.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:31.825Z,1516722991.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:31.889Z,1516722991.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:32.222Z,1516722992.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:32.254Z,1516722992.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:32.603Z,1516722992.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:32.680Z,1516722992.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:33.002Z,1516722993.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:33.038Z,1516722993.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:33.434Z,1516722993.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:33.453Z,1516722993.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:33.825Z,1516722993.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:33.880Z,1516722993.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:34.209Z,1516722994.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:34.259Z,1516722994.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:34.608Z,1516722994.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:34.629Z,1516722994.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:35.007Z,1516722995.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:35.062Z,1516722995.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:35.416Z,1516722995.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:35.437Z,1516722995.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:35.837Z,1516722995.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:35.872Z,1516722995.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:36.218Z,1516722996.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:36.248Z,1516722996.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:36.598Z,1516722996.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:36.633Z,1516722996.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:37.030Z,1516722997.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:37.054Z,1516722997.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:37.402Z,1516722997.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:37.450Z,1516722997.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:37.825Z,1516722997.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:37.853Z,1516722997.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:38.225Z,1516722998.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:38.254Z,1516722998.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:38.613Z,1516722998.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:38.656Z,1516722998.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:39.007Z,1516722999.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:39.031Z,1516722999.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:39.411Z,1516722999.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:39.430Z,1516722999.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:39.808Z,1516722999.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:39.836Z,1516722999.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:40.204Z,1516723000.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:40.235Z,1516723000.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:40.621Z,1516723000.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:40.649Z,1516723000.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:41.025Z,1516723001.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:41.092Z,1516723001.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:41.414Z,1516723001.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:41.448Z,1516723001.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:41.827Z,1516723001.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:41.861Z,1516723001.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:42.207Z,1516723002.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:42.258Z,1516723002.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:42.605Z,1516723002.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:42.625Z,1516723002.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:43.004Z,1516723003.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:43.031Z,1516723003.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:43.410Z,1516723003.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:43.425Z,1516723003.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:43.812Z,1516723003.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:43.835Z,1516723003.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:44.219Z,1516723004.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:44.234Z,1516723004.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:44.616Z,1516723004.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:44.631Z,1516723004.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:47.717Z,1516723007.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:47.741Z,1516723007.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:47.840Z,1516723007.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:47.885Z,1516723007.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:48.231Z,1516723008.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:48.263Z,1516723008.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:48.624Z,1516723008.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:48.639Z,1516723008.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:49.031Z,1516723009.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:49.062Z,1516723009.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:49.416Z,1516723009.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:49.443Z,1516723009.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:49.813Z,1516723009.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:49.835Z,1516723009.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:50.212Z,1516723010.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:50.239Z,1516723010.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:50.628Z,1516723010.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:50.643Z,1516723010.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:51.031Z,1516723011.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:51.046Z,1516723011.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:51.427Z,1516723011.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:51.449Z,1516723011.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:51.822Z,1516723011.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:51.840Z,1516723011.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:52.206Z,1516723012.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:52.233Z,1516723012.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:52.621Z,1516723012.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:52.641Z,1516723012.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:53.018Z,1516723013.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:53.033Z,1516723013.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:53.416Z,1516723013.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:53.436Z,1516723013.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:53.827Z,1516723013.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:53.842Z,1516723013.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:54.243Z,1516723014.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:54.314Z,1516723014.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:54.626Z,1516723014.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:54.648Z,1516723014.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:55.012Z,1516723015.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:55.041Z,1516723015.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:55.408Z,1516723015.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:55.444Z,1516723015.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:55.823Z,1516723015.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:55.838Z,1516723015.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:56.208Z,1516723016.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:56.236Z,1516723016.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:56.626Z,1516723016.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:56.648Z,1516723016.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:57.032Z,1516723017.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:57.080Z,1516723017.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:57.424Z,1516723017.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:57.452Z,1516723017.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:57.808Z,1516723017.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:57.843Z,1516723017.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:58.206Z,1516723018.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:58.229Z,1516723018.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:58.608Z,1516723018.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:58.641Z,1516723018.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:59.013Z,1516723019.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:59.054Z,1516723019.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:59.412Z,1516723019.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:59.448Z,1516723019.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:56:59.820Z,1516723019.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:56:59.845Z,1516723019.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:00.240Z,1516723020.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:00.254Z,1516723020.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:00.620Z,1516723020.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:00.645Z,1516723020.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:01.009Z,1516723021.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:01.025Z,1516723021.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:01.408Z,1516723021.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:01.429Z,1516723021.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:01.813Z,1516723021.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:01.829Z,1516723021.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:02.216Z,1516723022.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:02.253Z,1516723022.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:02.627Z,1516723022.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:02.662Z,1516723022.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:03.024Z,1516723023.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:03.038Z,1516723023.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:03.432Z,1516723023.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:03.462Z,1516723023.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:03.814Z,1516723023.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:03.850Z,1516723023.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:04.214Z,1516723024.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:04.241Z,1516723024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:04.622Z,1516723024.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:04.638Z,1516723024.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:05.020Z,1516723025.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:05.035Z,1516723025.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:05.418Z,1516723025.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:05.441Z,1516723025.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:05.822Z,1516723025.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:05.845Z,1516723025.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:06.227Z,1516723026.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:06.243Z,1516723026.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:06.624Z,1516723026.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:06.640Z,1516723026.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:07.016Z,1516723027.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:07.035Z,1516723027.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:07.418Z,1516723027.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:07.433Z,1516723027.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:07.820Z,1516723027.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:07.835Z,1516723027.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:08.216Z,1516723028.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:08.232Z,1516723028.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:08.623Z,1516723028.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:08.638Z,1516723028.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:09.023Z,1516723029.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:09.038Z,1516723029.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:09.422Z,1516723029.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:09.437Z,1516723029.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:09.821Z,1516723029.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:09.837Z,1516723029.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:10.212Z,1516723030.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:10.233Z,1516723030.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:10.616Z,1516723030.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:10.632Z,1516723030.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:11.018Z,1516723031.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:11.033Z,1516723031.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:11.416Z,1516723031.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:11.432Z,1516723031.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:11.821Z,1516723031.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:11.837Z,1516723031.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:12.223Z,1516723032.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:12.238Z,1516723032.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:12.624Z,1516723032.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:12.639Z,1516723032.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:13.016Z,1516723033.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:13.031Z,1516723033.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:13.417Z,1516723033.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:13.432Z,1516723033.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:13.816Z,1516723033.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:13.835Z,1516723033.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:14.216Z,1516723034.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:14.237Z,1516723034.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:14.622Z,1516723034.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:14.638Z,1516723034.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:15.021Z,1516723035.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:15.037Z,1516723035.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:15.422Z,1516723035.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:15.437Z,1516723035.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:15.817Z,1516723035.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:15.832Z,1516723035.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:16.212Z,1516723036.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:16.232Z,1516723036.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:16.612Z,1516723036.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:16.641Z,1516723036.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:17.018Z,1516723037.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:17.033Z,1516723037.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:17.416Z,1516723037.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:17.440Z,1516723037.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:17.822Z,1516723037.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:17.837Z,1516723037.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:18.222Z,1516723038.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:18.237Z,1516723038.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:18.622Z,1516723038.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:18.637Z,1516723038.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:19.016Z,1516723039.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:19.031Z,1516723039.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:19.417Z,1516723039.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:19.432Z,1516723039.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:19.829Z,1516723039.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:19.845Z,1516723039.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:20.208Z,1516723040.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:20.241Z,1516723040.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:20.628Z,1516723040.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:20.643Z,1516723040.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:21.031Z,1516723041.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:21.046Z,1516723041.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:21.428Z,1516723041.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:21.449Z,1516723041.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:21.821Z,1516723041.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:21.836Z,1516723041.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:22.206Z,1516723042.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:22.234Z,1516723042.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:22.612Z,1516723042.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:22.639Z,1516723042.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:23.009Z,1516723043.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:23.037Z,1516723043.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:23.408Z,1516723043.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:23.434Z,1516723043.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:23.826Z,1516723043.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:23.846Z,1516723043.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:24.236Z,1516723044.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:24.250Z,1516723044.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:24.623Z,1516723044.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:24.657Z,1516723044.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:25.012Z,1516723045.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:25.038Z,1516723045.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:25.408Z,1516723045.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:25.442Z,1516723045.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:25.813Z,1516723045.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:25.840Z,1516723045.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:26.208Z,1516723046.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:26.237Z,1516723046.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:26.619Z,1516723046.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:26.653Z,1516723046.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:27.019Z,1516723047.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:27.053Z,1516723047.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:27.431Z,1516723047.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:27.446Z,1516723047.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:27.809Z,1516723047.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:27.846Z,1516723047.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:28.206Z,1516723048.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:28.221Z,1516723048.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:28.608Z,1516723048.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:28.645Z,1516723048.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:29.009Z,1516723049.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:29.024Z,1516723049.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:29.414Z,1516723049.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:29.429Z,1516723049.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:29.831Z,1516723049.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:29.861Z,1516723049.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:30.231Z,1516723050.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:30.257Z,1516723050.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:30.624Z,1516723050.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:30.657Z,1516723050.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:31.017Z,1516723051.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:31.032Z,1516723051.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:31.425Z,1516723051.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:31.440Z,1516723051.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:31.817Z,1516723051.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:31.836Z,1516723051.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:32.213Z,1516723052.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:32.235Z,1516723052.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:32.624Z,1516723052.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:32.640Z,1516723052.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:33.028Z,1516723053.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:33.057Z,1516723053.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:33.432Z,1516723053.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:33.447Z,1516723053.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:33.809Z,1516723053.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:33.847Z,1516723053.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:34.206Z,1516723054.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:34.234Z,1516723054.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:34.608Z,1516723054.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:34.635Z,1516723054.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:35.009Z,1516723055.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:35.045Z,1516723055.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:35.412Z,1516723055.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:35.439Z,1516723055.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:35.827Z,1516723055.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:35.843Z,1516723055.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:36.230Z,1516723056.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:36.247Z,1516723056.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:36.627Z,1516723056.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:36.642Z,1516723056.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:37.008Z,1516723057.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:37.045Z,1516723057.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:37.409Z,1516723057.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:37.445Z,1516723057.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:37.809Z,1516723057.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:37.841Z,1516723057.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:38.212Z,1516723058.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:38.249Z,1516723058.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:38.619Z,1516723058.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:38.655Z,1516723058.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:39.019Z,1516723059.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:39.046Z,1516723059.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:39.431Z,1516723059.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:39.461Z,1516723059.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:39.821Z,1516723059.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:39.856Z,1516723059.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:40.214Z,1516723060.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:40.229Z,1516723060.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:40.621Z,1516723060.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:40.661Z,1516723060.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:41.019Z,1516723061.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:41.035Z,1516723061.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:41.416Z,1516723061.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:41.431Z,1516723061.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:41.820Z,1516723061.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:41.835Z,1516723061.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:42.223Z,1516723062.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:42.239Z,1516723062.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:42.620Z,1516723062.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:42.636Z,1516723062.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:43.015Z,1516723063.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:43.036Z,1516723063.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:43.417Z,1516723063.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:43.440Z,1516723063.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:43.816Z,1516723063.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:43.836Z,1516723063.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:44.208Z,1516723064.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:44.245Z,1516723064.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:44.633Z,1516723064.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:44.648Z,1516723064.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:47.727Z,1516723067.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:47.749Z,1516723067.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:47.856Z,1516723067.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:47.897Z,1516723067.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:48.238Z,1516723068.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:48.254Z,1516723068.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:48.638Z,1516723068.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:48.661Z,1516723068.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:49.037Z,1516723069.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:49.057Z,1516723069.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:49.443Z,1516723069.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:49.458Z,1516723069.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:49.844Z,1516723069.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:49.859Z,1516723069.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:50.244Z,1516723070.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:50.265Z,1516723070.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:50.644Z,1516723070.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:50.660Z,1516723070.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:51.037Z,1516723071.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:51.052Z,1516723071.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:51.436Z,1516723071.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:51.452Z,1516723071.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:51.837Z,1516723071.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:51.854Z,1516723071.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:52.236Z,1516723072.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:52.252Z,1516723072.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:52.641Z,1516723072.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:52.665Z,1516723072.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:53.047Z,1516723073.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:53.063Z,1516723073.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:53.447Z,1516723073.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:53.462Z,1516723073.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:53.465Z,1516723073.465 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:53.465Z,1516723073.465 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 253 2018-01-23T15:57:53.465Z,1516723073.465 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T15:57:53.489Z,1516723073.489 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T15:57:53.840Z,1516723073.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:53.861Z,1516723073.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:53.874Z,1516723073.874 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T15:57:53.874Z,1516723073.874 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 253 2018-01-23T15:57:54.237Z,1516723074.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:54.256Z,1516723074.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:54.258Z,1516723074.258 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T15:57:54.258Z,1516723074.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:57:54.258Z,1516723074.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:57:54.631Z,1516723074.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:54.664Z,1516723074.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:55.033Z,1516723075.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:55.056Z,1516723075.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:55.438Z,1516723075.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:55.453Z,1516723075.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:55.847Z,1516723075.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:55.862Z,1516723075.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:56.250Z,1516723076.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:56.266Z,1516723076.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:56.648Z,1516723076.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:56.668Z,1516723076.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:57.032Z,1516723077.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:57.055Z,1516723077.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:57.431Z,1516723077.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:57.463Z,1516723077.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:57.838Z,1516723077.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:57.853Z,1516723077.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:58.236Z,1516723078.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:58.257Z,1516723078.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:58.650Z,1516723078.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:58.665Z,1516723078.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:59.050Z,1516723079.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:59.065Z,1516723079.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:59.447Z,1516723079.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:59.462Z,1516723079.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:57:59.836Z,1516723079.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:57:59.855Z,1516723079.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:00.237Z,1516723080.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:00.256Z,1516723080.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:00.640Z,1516723080.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:00.657Z,1516723080.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:01.033Z,1516723081.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:01.056Z,1516723081.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:01.438Z,1516723081.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:01.453Z,1516723081.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:01.847Z,1516723081.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:01.862Z,1516723081.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:02.251Z,1516723082.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:02.266Z,1516723082.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:02.648Z,1516723082.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:02.668Z,1516723082.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:03.040Z,1516723083.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:03.061Z,1516723083.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:03.432Z,1516723083.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:03.455Z,1516723083.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:03.837Z,1516723083.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:03.852Z,1516723083.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:04.232Z,1516723084.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:04.255Z,1516723084.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:04.647Z,1516723084.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:04.662Z,1516723084.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:05.050Z,1516723085.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:05.065Z,1516723085.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:05.447Z,1516723085.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:05.462Z,1516723085.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:05.831Z,1516723085.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:05.858Z,1516723085.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:06.228Z,1516723086.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:06.256Z,1516723086.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:06.628Z,1516723086.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:06.665Z,1516723086.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:06.665Z,1516723086.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 253 2018-01-23T15:58:06.665Z,1516723086.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T15:58:06.671Z,1516723086.671 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:06.671Z,1516723086.671 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 253 2018-01-23T15:58:06.671Z,1516723086.671 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T15:58:06.688Z,1516723086.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T15:58:06.688Z,1516723086.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T15:58:07.029Z,1516723087.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:07.076Z,1516723087.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T15:58:07.076Z,1516723087.076 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 253 2018-01-23T15:58:07.076Z,1516723087.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T15:58:07.076Z,1516723087.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 253 2018-01-23T15:58:07.427Z,1516723087.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:07.465Z,1516723087.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T15:58:07.465Z,1516723087.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:58:07.466Z,1516723087.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:58:07.466Z,1516723087.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T15:58:07.466Z,1516723087.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T15:58:07.467Z,1516723087.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T15:58:07.839Z,1516723087.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:07.874Z,1516723087.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T15:58:07.875Z,1516723087.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:08.252Z,1516723088.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:08.267Z,1516723088.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T15:58:08.268Z,1516723088.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:08.655Z,1516723088.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:08.669Z,1516723088.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T15:58:08.670Z,1516723088.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:09.033Z,1516723089.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:09.064Z,1516723089.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T15:58:09.065Z,1516723089.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:09.428Z,1516723089.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:09.465Z,1516723089.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T15:58:09.466Z,1516723089.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:09.829Z,1516723089.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:09.865Z,1516723089.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T15:58:09.866Z,1516723089.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:10.228Z,1516723090.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:10.264Z,1516723090.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T15:58:10.265Z,1516723090.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:10.639Z,1516723090.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:10.676Z,1516723090.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T15:58:10.677Z,1516723090.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:11.057Z,1516723091.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:11.071Z,1516723091.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T15:58:11.072Z,1516723091.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:11.443Z,1516723091.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:11.469Z,1516723091.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T15:58:11.470Z,1516723091.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:11.828Z,1516723091.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:11.868Z,1516723091.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T15:58:11.869Z,1516723091.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:12.232Z,1516723092.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:12.247Z,1516723092.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T15:58:12.248Z,1516723092.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:12.636Z,1516723092.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:12.673Z,1516723092.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T15:58:12.674Z,1516723092.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:13.030Z,1516723093.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:13.068Z,1516723093.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T15:58:13.069Z,1516723093.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:13.434Z,1516723093.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:13.448Z,1516723093.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T15:58:13.449Z,1516723093.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:13.847Z,1516723093.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:13.878Z,1516723093.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T15:58:13.883Z,1516723093.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:14.244Z,1516723094.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:14.282Z,1516723094.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T15:58:14.283Z,1516723094.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:14.639Z,1516723094.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:14.660Z,1516723094.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T15:58:14.661Z,1516723094.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:15.038Z,1516723095.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:15.060Z,1516723095.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T15:58:15.061Z,1516723095.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:15.434Z,1516723095.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:15.454Z,1516723095.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T15:58:15.459Z,1516723095.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:15.838Z,1516723095.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:15.853Z,1516723095.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T15:58:15.854Z,1516723095.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:16.232Z,1516723096.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:16.254Z,1516723096.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T15:58:16.255Z,1516723096.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:16.645Z,1516723096.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:16.661Z,1516723096.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T15:58:16.662Z,1516723096.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:17.046Z,1516723097.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:17.061Z,1516723097.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T15:58:17.062Z,1516723097.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:17.447Z,1516723097.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:17.462Z,1516723097.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T15:58:17.463Z,1516723097.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:17.845Z,1516723097.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:17.860Z,1516723097.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T15:58:17.861Z,1516723097.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:18.237Z,1516723098.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:18.251Z,1516723098.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T15:58:18.252Z,1516723098.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:18.644Z,1516723098.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:18.664Z,1516723098.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T15:58:18.665Z,1516723098.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:19.036Z,1516723099.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:19.055Z,1516723099.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T15:58:19.056Z,1516723099.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:19.435Z,1516723099.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:19.463Z,1516723099.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T15:58:19.464Z,1516723099.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:19.847Z,1516723099.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:19.862Z,1516723099.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T15:58:19.863Z,1516723099.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:20.246Z,1516723100.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:20.261Z,1516723100.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T15:58:20.262Z,1516723100.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:20.647Z,1516723100.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:20.662Z,1516723100.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T15:58:20.663Z,1516723100.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:21.045Z,1516723101.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:21.059Z,1516723101.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T15:58:21.060Z,1516723101.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:21.445Z,1516723101.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:21.460Z,1516723101.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T15:58:21.460Z,1516723101.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:21.840Z,1516723101.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:21.854Z,1516723101.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T15:58:21.855Z,1516723101.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:22.238Z,1516723102.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:22.253Z,1516723102.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T15:58:22.254Z,1516723102.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:22.642Z,1516723102.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:22.680Z,1516723102.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T15:58:22.681Z,1516723102.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:23.053Z,1516723103.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:23.067Z,1516723103.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T15:58:23.068Z,1516723103.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:23.448Z,1516723103.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:23.462Z,1516723103.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T15:58:23.463Z,1516723103.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:23.831Z,1516723103.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:23.864Z,1516723103.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T15:58:23.865Z,1516723103.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:24.242Z,1516723104.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:24.257Z,1516723104.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T15:58:24.259Z,1516723104.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:24.627Z,1516723104.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:24.654Z,1516723104.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T15:58:24.659Z,1516723104.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:25.030Z,1516723105.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:25.056Z,1516723105.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T15:58:25.057Z,1516723105.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:25.429Z,1516723105.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:25.473Z,1516723105.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T15:58:25.474Z,1516723105.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:25.848Z,1516723105.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:25.864Z,1516723105.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T15:58:25.865Z,1516723105.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:26.250Z,1516723106.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:26.275Z,1516723106.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T15:58:26.276Z,1516723106.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:26.650Z,1516723106.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:26.665Z,1516723106.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:27.026Z,1516723107.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:27.050Z,1516723107.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:27.428Z,1516723107.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:27.465Z,1516723107.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:27.829Z,1516723107.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:27.862Z,1516723107.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:28.230Z,1516723108.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:28.246Z,1516723108.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:28.652Z,1516723108.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:28.677Z,1516723108.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:29.064Z,1516723109.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:29.079Z,1516723109.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:29.448Z,1516723109.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:29.473Z,1516723109.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:29.841Z,1516723109.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:29.876Z,1516723109.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:30.233Z,1516723110.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:30.253Z,1516723110.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:30.629Z,1516723110.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:30.649Z,1516723110.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:31.034Z,1516723111.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:31.053Z,1516723111.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:31.436Z,1516723111.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:31.451Z,1516723111.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:31.843Z,1516723111.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:31.859Z,1516723111.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:32.243Z,1516723112.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:32.258Z,1516723112.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:32.639Z,1516723112.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:32.660Z,1516723112.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:33.033Z,1516723113.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:33.048Z,1516723113.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:33.435Z,1516723113.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:33.450Z,1516723113.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:33.837Z,1516723113.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:33.852Z,1516723113.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:34.232Z,1516723114.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:34.251Z,1516723114.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:34.639Z,1516723114.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:34.655Z,1516723114.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:35.043Z,1516723115.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:35.058Z,1516723115.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:35.442Z,1516723115.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:35.461Z,1516723115.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:35.836Z,1516723115.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:35.854Z,1516723115.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:36.237Z,1516723116.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:36.252Z,1516723116.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:36.642Z,1516723116.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:36.661Z,1516723116.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:37.043Z,1516723117.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:37.058Z,1516723117.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:37.442Z,1516723117.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:37.465Z,1516723117.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:37.840Z,1516723117.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:37.855Z,1516723117.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:38.233Z,1516723118.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:38.260Z,1516723118.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:38.646Z,1516723118.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:38.662Z,1516723118.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:39.046Z,1516723119.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:39.061Z,1516723119.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:39.446Z,1516723119.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:39.465Z,1516723119.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:39.838Z,1516723119.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:39.853Z,1516723119.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:40.233Z,1516723120.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:40.252Z,1516723120.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:40.642Z,1516723120.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:40.678Z,1516723120.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:41.050Z,1516723121.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:41.065Z,1516723121.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:41.450Z,1516723121.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:41.465Z,1516723121.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:41.833Z,1516723121.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:41.855Z,1516723121.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:42.236Z,1516723122.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:42.256Z,1516723122.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:42.646Z,1516723122.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:42.662Z,1516723122.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:43.050Z,1516723123.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:43.069Z,1516723123.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:43.451Z,1516723123.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:43.466Z,1516723123.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:43.841Z,1516723123.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:43.857Z,1516723123.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:44.233Z,1516723124.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:44.255Z,1516723124.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:44.649Z,1516723124.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:44.669Z,1516723124.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:47.750Z,1516723127.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:47.766Z,1516723127.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:47.889Z,1516723127.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:47.925Z,1516723127.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:48.240Z,1516723128.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:48.255Z,1516723128.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:48.641Z,1516723128.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:48.656Z,1516723128.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:49.033Z,1516723129.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:49.056Z,1516723129.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:49.431Z,1516723129.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:49.464Z,1516723129.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:49.848Z,1516723129.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:49.869Z,1516723129.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:50.250Z,1516723130.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:50.269Z,1516723130.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:50.647Z,1516723130.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:50.662Z,1516723130.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:51.038Z,1516723131.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:51.060Z,1516723131.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:51.441Z,1516723131.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:51.461Z,1516723131.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:51.846Z,1516723131.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:51.861Z,1516723131.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:52.238Z,1516723132.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:52.252Z,1516723132.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:52.647Z,1516723132.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:52.662Z,1516723132.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:53.051Z,1516723133.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:53.066Z,1516723133.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:53.448Z,1516723133.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:53.463Z,1516723133.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:53.837Z,1516723133.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:53.853Z,1516723133.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:54.231Z,1516723134.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:54.263Z,1516723134.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:54.651Z,1516723134.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:54.667Z,1516723134.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:55.050Z,1516723135.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:55.066Z,1516723135.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:55.446Z,1516723135.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:55.462Z,1516723135.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:55.838Z,1516723135.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:55.861Z,1516723135.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:56.240Z,1516723136.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:56.255Z,1516723136.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:56.646Z,1516723136.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:56.661Z,1516723136.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:57.051Z,1516723137.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:57.066Z,1516723137.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:57.447Z,1516723137.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:57.462Z,1516723137.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:57.833Z,1516723137.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:57.855Z,1516723137.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:58.235Z,1516723138.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:58.265Z,1516723138.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:58.651Z,1516723138.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:58.666Z,1516723138.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:59.050Z,1516723139.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:59.066Z,1516723139.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:59.448Z,1516723139.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:59.463Z,1516723139.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:58:59.838Z,1516723139.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:58:59.853Z,1516723139.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:00.245Z,1516723140.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:00.260Z,1516723140.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:00.648Z,1516723140.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:00.663Z,1516723140.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:01.050Z,1516723141.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:01.066Z,1516723141.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:01.444Z,1516723141.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:01.471Z,1516723141.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:01.830Z,1516723141.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:01.857Z,1516723141.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:02.228Z,1516723142.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:02.265Z,1516723142.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:02.652Z,1516723142.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:02.668Z,1516723142.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:03.054Z,1516723143.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:03.069Z,1516723143.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:03.447Z,1516723143.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:03.467Z,1516723143.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:03.829Z,1516723143.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:03.865Z,1516723143.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:04.232Z,1516723144.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:04.262Z,1516723144.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:04.643Z,1516723144.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:04.676Z,1516723144.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:05.049Z,1516723145.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:05.071Z,1516723145.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:05.450Z,1516723145.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:05.469Z,1516723145.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:05.827Z,1516723145.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:05.850Z,1516723145.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:06.230Z,1516723146.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:06.261Z,1516723146.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:06.629Z,1516723146.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:06.676Z,1516723146.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:07.040Z,1516723147.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:07.067Z,1516723147.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:07.444Z,1516723147.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:07.479Z,1516723147.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:07.840Z,1516723147.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:07.876Z,1516723147.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:08.226Z,1516723148.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:08.242Z,1516723148.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:08.628Z,1516723148.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:08.645Z,1516723148.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:09.037Z,1516723149.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:09.053Z,1516723149.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:09.436Z,1516723149.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:09.481Z,1516723149.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:09.851Z,1516723149.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:09.875Z,1516723149.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:10.247Z,1516723150.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:10.280Z,1516723150.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:10.647Z,1516723150.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:10.678Z,1516723150.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:11.034Z,1516723151.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:11.053Z,1516723151.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:11.433Z,1516723151.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:11.460Z,1516723151.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:11.830Z,1516723151.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:11.854Z,1516723151.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:12.238Z,1516723152.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:12.253Z,1516723152.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:12.636Z,1516723152.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:12.651Z,1516723152.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:13.039Z,1516723153.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:13.055Z,1516723153.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:13.443Z,1516723153.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:13.458Z,1516723153.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:13.839Z,1516723153.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:13.860Z,1516723153.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:14.234Z,1516723154.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:14.257Z,1516723154.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:14.634Z,1516723154.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:14.658Z,1516723154.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:15.041Z,1516723155.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:15.056Z,1516723155.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:15.440Z,1516723155.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:15.456Z,1516723155.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:15.841Z,1516723155.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:15.861Z,1516723155.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:16.243Z,1516723156.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:16.258Z,1516723156.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:16.642Z,1516723156.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:16.661Z,1516723156.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:17.036Z,1516723157.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:17.051Z,1516723157.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:17.437Z,1516723157.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:17.452Z,1516723157.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:17.832Z,1516723157.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:17.855Z,1516723157.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:18.236Z,1516723158.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:18.255Z,1516723158.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:18.637Z,1516723158.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:18.652Z,1516723158.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:19.046Z,1516723159.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:19.062Z,1516723159.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:19.447Z,1516723159.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:19.462Z,1516723159.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:19.846Z,1516723159.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:19.861Z,1516723159.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:20.232Z,1516723160.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:20.254Z,1516723160.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:20.632Z,1516723160.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:20.654Z,1516723160.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:21.046Z,1516723161.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:21.061Z,1516723161.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:21.440Z,1516723161.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:21.455Z,1516723161.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:21.846Z,1516723161.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:21.862Z,1516723161.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:22.251Z,1516723162.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:22.266Z,1516723162.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:22.650Z,1516723162.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:22.666Z,1516723162.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:23.044Z,1516723163.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:23.065Z,1516723163.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:23.437Z,1516723163.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:23.452Z,1516723163.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:23.832Z,1516723163.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:23.855Z,1516723163.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:24.247Z,1516723164.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:24.262Z,1516723164.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:24.645Z,1516723164.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:24.660Z,1516723164.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:25.046Z,1516723165.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:25.062Z,1516723165.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:25.450Z,1516723165.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:25.469Z,1516723165.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:25.850Z,1516723165.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:25.865Z,1516723165.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:26.237Z,1516723166.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:26.256Z,1516723166.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:26.632Z,1516723166.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:26.664Z,1516723166.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:27.038Z,1516723167.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:27.053Z,1516723167.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:27.434Z,1516723167.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:27.462Z,1516723167.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:27.855Z,1516723167.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:27.870Z,1516723167.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:28.252Z,1516723168.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:28.269Z,1516723168.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:28.644Z,1516723168.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:28.675Z,1516723168.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:29.031Z,1516723169.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:29.058Z,1516723169.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:29.432Z,1516723169.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:29.469Z,1516723169.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:29.829Z,1516723169.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:29.865Z,1516723169.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:30.233Z,1516723170.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:30.260Z,1516723170.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:30.632Z,1516723170.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:30.668Z,1516723170.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:31.052Z,1516723171.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:31.067Z,1516723171.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:31.456Z,1516723171.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:31.471Z,1516723171.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:31.848Z,1516723171.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:31.863Z,1516723171.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:32.236Z,1516723172.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:32.262Z,1516723172.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:32.633Z,1516723172.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:32.660Z,1516723172.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:33.033Z,1516723173.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:33.065Z,1516723173.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:33.428Z,1516723173.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:33.465Z,1516723173.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:33.852Z,1516723173.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:33.867Z,1516723173.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:34.252Z,1516723174.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:34.268Z,1516723174.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:34.651Z,1516723174.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:34.667Z,1516723174.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:35.028Z,1516723175.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:35.078Z,1516723175.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:35.435Z,1516723175.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:35.464Z,1516723175.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:35.834Z,1516723175.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:35.864Z,1516723175.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:36.241Z,1516723176.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:36.268Z,1516723176.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:36.629Z,1516723176.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:36.666Z,1516723176.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:37.041Z,1516723177.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:37.073Z,1516723177.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:37.455Z,1516723177.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:37.470Z,1516723177.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:37.851Z,1516723177.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:37.876Z,1516723177.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:38.230Z,1516723178.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:38.253Z,1516723178.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:38.630Z,1516723178.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:38.669Z,1516723178.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:39.031Z,1516723179.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:39.046Z,1516723179.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:39.433Z,1516723179.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:39.473Z,1516723179.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:39.851Z,1516723179.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:39.885Z,1516723179.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:40.265Z,1516723180.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:40.280Z,1516723180.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:40.644Z,1516723180.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:40.689Z,1516723180.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:41.040Z,1516723181.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:41.080Z,1516723181.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:41.438Z,1516723181.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:41.453Z,1516723181.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:41.842Z,1516723181.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:41.857Z,1516723181.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:42.239Z,1516723182.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:42.254Z,1516723182.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:42.641Z,1516723182.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:42.656Z,1516723182.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:43.044Z,1516723183.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:43.060Z,1516723183.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:43.445Z,1516723183.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:43.460Z,1516723183.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:43.848Z,1516723183.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:43.862Z,1516723183.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:43.865Z,1516723183.865 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T15:59:43.865Z,1516723183.865 [Default:CheckIn:C.Wait] Stopped 2018-01-23T15:59:43.865Z,1516723183.865 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T15:59:43.866Z,1516723183.866 [Default:CheckIn:D] Running Loop=1 2018-01-23T15:59:44.232Z,1516723184.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:44.265Z,1516723184.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:44.272Z,1516723184.272 [Default:CheckIn:D] Stopped 2018-01-23T15:59:44.272Z,1516723184.272 [Default:CheckIn:E] Running Loop=1 2018-01-23T15:59:44.644Z,1516723184.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:44.660Z,1516723184.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:44.663Z,1516723184.663 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 761.870182 min 2018-01-23T15:59:44.663Z,1516723184.663 [Default:CheckIn:E] Stopped 2018-01-23T15:59:44.663Z,1516723184.663 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn] Stopped 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn](INFO): Running loop #75 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn] Running Loop=75 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T15:59:44.664Z,1516723184.664 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T15:59:45.045Z,1516723185.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:45.082Z,1516723185.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:48.151Z,1516723188.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:48.173Z,1516723188.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:48.283Z,1516723188.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:48.310Z,1516723188.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:48.654Z,1516723188.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:48.670Z,1516723188.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:49.037Z,1516723189.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:49.073Z,1516723189.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:49.428Z,1516723189.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:49.443Z,1516723189.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:49.823Z,1516723189.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:49.861Z,1516723189.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:50.226Z,1516723190.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:50.245Z,1516723190.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:50.625Z,1516723190.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:50.643Z,1516723190.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:51.031Z,1516723191.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:51.052Z,1516723191.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:51.435Z,1516723191.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:51.473Z,1516723191.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:51.830Z,1516723191.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:51.848Z,1516723191.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:52.224Z,1516723192.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:52.243Z,1516723192.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:52.627Z,1516723192.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:52.646Z,1516723192.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:53.020Z,1516723193.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:53.071Z,1516723193.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:53.428Z,1516723193.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:53.447Z,1516723193.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:53.832Z,1516723193.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:53.849Z,1516723193.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:54.233Z,1516723194.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:54.253Z,1516723194.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:54.633Z,1516723194.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:54.679Z,1516723194.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:55.022Z,1516723195.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:55.038Z,1516723195.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:55.428Z,1516723195.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:55.447Z,1516723195.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:55.825Z,1516723195.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:55.842Z,1516723195.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:56.223Z,1516723196.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:56.260Z,1516723196.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:56.624Z,1516723196.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:56.639Z,1516723196.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:57.034Z,1516723197.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:57.052Z,1516723197.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:57.437Z,1516723197.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:57.453Z,1516723197.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:57.834Z,1516723197.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:57.875Z,1516723197.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:58.224Z,1516723198.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:58.245Z,1516723198.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:58.625Z,1516723198.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:58.645Z,1516723198.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:59.021Z,1516723199.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:59.053Z,1516723199.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:59.428Z,1516723199.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:59.453Z,1516723199.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T15:59:59.836Z,1516723199.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T15:59:59.854Z,1516723199.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:00.239Z,1516723200.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:00.257Z,1516723200.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:00.637Z,1516723200.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:00.656Z,1516723200.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:01.014Z,1516723201.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:01.057Z,1516723201.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:01.428Z,1516723201.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:01.449Z,1516723201.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:01.824Z,1516723201.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:01.839Z,1516723201.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:02.226Z,1516723202.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:02.245Z,1516723202.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:02.619Z,1516723202.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:02.650Z,1516723202.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:03.037Z,1516723203.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:03.060Z,1516723203.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:03.438Z,1516723203.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:03.457Z,1516723203.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:03.835Z,1516723203.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:03.853Z,1516723203.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:04.224Z,1516723204.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:04.249Z,1516723204.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:04.623Z,1516723204.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:04.647Z,1516723204.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:05.024Z,1516723205.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:05.044Z,1516723205.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:05.425Z,1516723205.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:05.448Z,1516723205.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:05.839Z,1516723205.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:05.854Z,1516723205.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:06.239Z,1516723206.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:06.254Z,1516723206.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:06.635Z,1516723206.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:06.660Z,1516723206.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:07.014Z,1516723207.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:07.052Z,1516723207.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:07.428Z,1516723207.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:07.447Z,1516723207.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:07.824Z,1516723207.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:07.855Z,1516723207.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:08.218Z,1516723208.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:08.245Z,1516723208.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:08.617Z,1516723208.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:08.655Z,1516723208.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:09.036Z,1516723209.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:09.051Z,1516723209.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:09.440Z,1516723209.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:09.455Z,1516723209.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:09.836Z,1516723209.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:09.851Z,1516723209.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:10.216Z,1516723210.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:10.255Z,1516723210.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:10.616Z,1516723210.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:10.645Z,1516723210.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:11.017Z,1516723211.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:11.049Z,1516723211.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:11.416Z,1516723211.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:11.453Z,1516723211.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:11.827Z,1516723211.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:11.858Z,1516723211.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:12.231Z,1516723212.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:12.258Z,1516723212.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:12.627Z,1516723212.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:12.655Z,1516723212.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:13.017Z,1516723213.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:13.032Z,1516723213.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:13.416Z,1516723213.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:13.437Z,1516723213.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:13.824Z,1516723213.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:13.861Z,1516723213.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:14.225Z,1516723214.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:14.240Z,1516723214.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:14.628Z,1516723214.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:14.649Z,1516723214.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:15.027Z,1516723215.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:15.043Z,1516723215.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:15.431Z,1516723215.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:15.446Z,1516723215.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:15.830Z,1516723215.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:15.845Z,1516723215.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:16.224Z,1516723216.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:16.245Z,1516723216.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:16.626Z,1516723216.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:16.681Z,1516723216.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:17.021Z,1516723217.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:17.066Z,1516723217.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:17.425Z,1516723217.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:17.440Z,1516723217.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:17.831Z,1516723217.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:17.846Z,1516723217.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:18.231Z,1516723218.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:18.246Z,1516723218.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:18.630Z,1516723218.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:18.645Z,1516723218.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:19.026Z,1516723219.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:19.042Z,1516723219.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:19.422Z,1516723219.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:19.443Z,1516723219.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:19.824Z,1516723219.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:19.856Z,1516723219.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:20.231Z,1516723220.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:20.246Z,1516723220.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:20.619Z,1516723220.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:20.655Z,1516723220.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:21.034Z,1516723221.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:21.050Z,1516723221.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:21.440Z,1516723221.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:21.455Z,1516723221.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:21.836Z,1516723221.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:21.851Z,1516723221.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:22.220Z,1516723222.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:22.252Z,1516723222.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:22.625Z,1516723222.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:22.648Z,1516723222.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:23.017Z,1516723223.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:23.053Z,1516723223.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:23.420Z,1516723223.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:23.453Z,1516723223.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:23.840Z,1516723223.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:23.856Z,1516723223.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:24.244Z,1516723224.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:24.260Z,1516723224.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:24.634Z,1516723224.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:24.657Z,1516723224.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:25.018Z,1516723225.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:25.057Z,1516723225.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:25.421Z,1516723225.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:25.453Z,1516723225.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:25.832Z,1516723225.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:25.857Z,1516723225.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:26.241Z,1516723226.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:26.256Z,1516723226.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:26.635Z,1516723226.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:26.656Z,1516723226.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:27.016Z,1516723227.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:27.058Z,1516723227.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:27.417Z,1516723227.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:27.444Z,1516723227.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:27.816Z,1516723227.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:27.855Z,1516723227.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:28.217Z,1516723228.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:28.254Z,1516723228.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:28.616Z,1516723228.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:28.644Z,1516723228.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:29.027Z,1516723229.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:29.054Z,1516723229.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:29.431Z,1516723229.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:29.468Z,1516723229.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:29.827Z,1516723229.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:29.867Z,1516723229.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:30.216Z,1516723230.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:30.253Z,1516723230.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:30.616Z,1516723230.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:30.631Z,1516723230.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:31.021Z,1516723231.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:31.036Z,1516723231.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:31.428Z,1516723231.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:31.465Z,1516723231.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:31.831Z,1516723231.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:31.846Z,1516723231.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:32.239Z,1516723232.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:32.254Z,1516723232.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:32.630Z,1516723232.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:32.649Z,1516723232.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:33.025Z,1516723233.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:33.039Z,1516723233.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:33.425Z,1516723233.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:33.440Z,1516723233.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:33.835Z,1516723233.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:33.851Z,1516723233.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:34.233Z,1516723234.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:34.252Z,1516723234.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:34.635Z,1516723234.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:34.651Z,1516723234.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:35.024Z,1516723235.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:35.044Z,1516723235.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:35.425Z,1516723235.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:35.445Z,1516723235.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:35.839Z,1516723235.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:35.854Z,1516723235.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:36.238Z,1516723236.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:36.253Z,1516723236.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:36.635Z,1516723236.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:36.650Z,1516723236.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:37.026Z,1516723237.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:37.041Z,1516723237.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:37.419Z,1516723237.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:37.451Z,1516723237.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:37.835Z,1516723237.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:37.850Z,1516723237.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:38.238Z,1516723238.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:38.253Z,1516723238.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:38.634Z,1516723238.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:38.649Z,1516723238.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:39.025Z,1516723239.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:39.044Z,1516723239.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:39.429Z,1516723239.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:39.444Z,1516723239.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:39.834Z,1516723239.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:39.850Z,1516723239.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:40.237Z,1516723240.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:40.256Z,1516723240.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:40.636Z,1516723240.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:40.651Z,1516723240.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:41.021Z,1516723241.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:41.044Z,1516723241.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:41.424Z,1516723241.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:41.439Z,1516723241.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:41.836Z,1516723241.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:41.851Z,1516723241.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:42.238Z,1516723242.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:42.257Z,1516723242.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:42.635Z,1516723242.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:42.650Z,1516723242.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:43.027Z,1516723243.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:43.043Z,1516723243.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:43.423Z,1516723243.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:43.438Z,1516723243.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:43.833Z,1516723243.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:43.848Z,1516723243.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:44.238Z,1516723244.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:44.253Z,1516723244.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:44.634Z,1516723244.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:44.657Z,1516723244.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:45.029Z,1516723245.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:45.043Z,1516723245.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:45.427Z,1516723245.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:45.442Z,1516723245.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:48.543Z,1516723248.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:48.565Z,1516723248.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:48.687Z,1516723248.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:48.727Z,1516723248.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:49.055Z,1516723249.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:49.089Z,1516723249.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:49.441Z,1516723249.441 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:49.457Z,1516723249.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:49.839Z,1516723249.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:49.854Z,1516723249.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:50.238Z,1516723250.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:50.269Z,1516723250.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:50.643Z,1516723250.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:50.658Z,1516723250.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:51.044Z,1516723251.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:51.059Z,1516723251.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:51.448Z,1516723251.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:51.463Z,1516723251.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:51.856Z,1516723251.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:51.891Z,1516723251.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:52.243Z,1516723252.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:52.259Z,1516723252.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:52.641Z,1516723252.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:52.657Z,1516723252.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:53.040Z,1516723253.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:53.067Z,1516723253.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:53.444Z,1516723253.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:53.459Z,1516723253.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:53.851Z,1516723253.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:53.866Z,1516723253.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:54.250Z,1516723254.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:54.269Z,1516723254.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:54.272Z,1516723254.272 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:54.272Z,1516723254.272 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 254 2018-01-23T16:00:54.272Z,1516723254.272 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:00:54.300Z,1516723254.300 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:00:54.650Z,1516723254.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:54.672Z,1516723254.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:54.710Z,1516723254.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:00:54.710Z,1516723254.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 254 2018-01-23T16:00:55.033Z,1516723255.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:55.061Z,1516723255.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:55.062Z,1516723255.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:00:55.062Z,1516723255.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:00:55.063Z,1516723255.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:00:55.432Z,1516723255.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:55.469Z,1516723255.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:55.855Z,1516723255.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:55.871Z,1516723255.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:56.253Z,1516723256.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:56.280Z,1516723256.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:56.655Z,1516723256.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:56.670Z,1516723256.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:57.033Z,1516723257.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:57.060Z,1516723257.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:57.433Z,1516723257.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:57.469Z,1516723257.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:57.843Z,1516723257.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:57.879Z,1516723257.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:58.255Z,1516723258.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:58.281Z,1516723258.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:58.655Z,1516723258.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:58.689Z,1516723258.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:59.038Z,1516723259.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:59.053Z,1516723259.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:59.445Z,1516723259.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:59.460Z,1516723259.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:00:59.847Z,1516723259.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:00:59.862Z,1516723259.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:00.255Z,1516723260.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:00.270Z,1516723260.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:00.647Z,1516723260.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:00.662Z,1516723260.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:01.037Z,1516723261.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:01.064Z,1516723261.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:01.440Z,1516723261.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:01.456Z,1516723261.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:01.850Z,1516723261.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:01.866Z,1516723261.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:02.250Z,1516723262.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:02.273Z,1516723262.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:02.651Z,1516723262.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:02.666Z,1516723262.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:03.048Z,1516723263.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:03.064Z,1516723263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:03.442Z,1516723263.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:03.457Z,1516723263.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:03.848Z,1516723263.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:03.873Z,1516723263.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:04.255Z,1516723264.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:04.270Z,1516723264.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:04.652Z,1516723264.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:04.667Z,1516723264.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:05.042Z,1516723265.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:05.061Z,1516723265.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:05.442Z,1516723265.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:05.458Z,1516723265.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:05.850Z,1516723265.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:05.874Z,1516723265.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:06.258Z,1516723266.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:06.277Z,1516723266.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:06.653Z,1516723266.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:06.668Z,1516723266.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:07.033Z,1516723267.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:07.069Z,1516723267.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:07.455Z,1516723267.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:07.470Z,1516723267.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:07.470Z,1516723267.470 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 254 2018-01-23T16:01:07.470Z,1516723267.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:01:07.473Z,1516723267.473 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:07.473Z,1516723267.473 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 254 2018-01-23T16:01:07.473Z,1516723267.473 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:01:07.485Z,1516723267.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:01:07.486Z,1516723267.486 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:01:07.852Z,1516723267.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:07.883Z,1516723267.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:01:07.883Z,1516723267.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 254 2018-01-23T16:01:07.883Z,1516723267.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:01:07.883Z,1516723267.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 254 2018-01-23T16:01:08.256Z,1516723268.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:08.274Z,1516723268.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:01:08.274Z,1516723268.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:01:08.274Z,1516723268.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:01:08.275Z,1516723268.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:01:08.275Z,1516723268.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:01:08.276Z,1516723268.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:01:08.643Z,1516723268.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:08.680Z,1516723268.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:01:08.681Z,1516723268.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:09.033Z,1516723269.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:09.064Z,1516723269.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:01:09.065Z,1516723269.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:09.432Z,1516723269.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:09.476Z,1516723269.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:01:09.477Z,1516723269.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:09.847Z,1516723269.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:09.874Z,1516723269.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:01:09.876Z,1516723269.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:10.247Z,1516723270.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:10.273Z,1516723270.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:01:10.274Z,1516723270.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:10.642Z,1516723270.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:10.676Z,1516723270.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:01:10.677Z,1516723270.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:11.033Z,1516723271.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:11.052Z,1516723271.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:01:11.053Z,1516723271.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:11.436Z,1516723271.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:11.451Z,1516723271.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:01:11.452Z,1516723271.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:11.855Z,1516723271.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:11.880Z,1516723271.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:01:11.881Z,1516723271.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:12.259Z,1516723272.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:12.292Z,1516723272.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:01:12.293Z,1516723272.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:12.654Z,1516723272.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:12.682Z,1516723272.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:01:12.683Z,1516723272.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:13.041Z,1516723273.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:13.055Z,1516723273.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:01:13.056Z,1516723273.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:13.442Z,1516723273.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:13.456Z,1516723273.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:01:13.457Z,1516723273.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:13.843Z,1516723273.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:13.858Z,1516723273.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:01:13.859Z,1516723273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:14.247Z,1516723274.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:14.261Z,1516723274.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:01:14.262Z,1516723274.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:14.643Z,1516723274.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:14.658Z,1516723274.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:01:14.659Z,1516723274.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:15.040Z,1516723275.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:15.054Z,1516723275.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:01:15.055Z,1516723275.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:15.440Z,1516723275.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:15.460Z,1516723275.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:01:15.461Z,1516723275.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:15.843Z,1516723275.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:15.858Z,1516723275.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:01:15.859Z,1516723275.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:16.247Z,1516723276.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:16.261Z,1516723276.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:01:16.262Z,1516723276.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:16.643Z,1516723276.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:16.664Z,1516723276.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:01:16.665Z,1516723276.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:17.042Z,1516723277.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:17.057Z,1516723277.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:01:17.058Z,1516723277.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:17.439Z,1516723277.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:17.454Z,1516723277.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:01:17.455Z,1516723277.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:17.843Z,1516723277.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:17.857Z,1516723277.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:01:17.858Z,1516723277.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:18.247Z,1516723278.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:18.262Z,1516723278.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:01:18.263Z,1516723278.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:18.647Z,1516723278.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:18.669Z,1516723278.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:01:18.670Z,1516723278.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:19.045Z,1516723279.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:19.059Z,1516723279.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:01:19.060Z,1516723279.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:19.440Z,1516723279.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:19.455Z,1516723279.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:01:19.456Z,1516723279.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:19.846Z,1516723279.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:19.868Z,1516723279.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:01:19.869Z,1516723279.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:20.250Z,1516723280.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:20.264Z,1516723280.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:01:20.265Z,1516723280.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:20.650Z,1516723280.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:20.664Z,1516723280.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:01:20.665Z,1516723280.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:21.040Z,1516723281.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:21.060Z,1516723281.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:01:21.061Z,1516723281.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:21.442Z,1516723281.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:21.456Z,1516723281.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:01:21.457Z,1516723281.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:21.836Z,1516723281.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:21.867Z,1516723281.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:01:21.868Z,1516723281.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:22.255Z,1516723282.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:22.278Z,1516723282.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:01:22.303Z,1516723282.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:22.661Z,1516723282.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:22.676Z,1516723282.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:01:22.677Z,1516723282.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:23.057Z,1516723283.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:23.080Z,1516723283.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:01:23.081Z,1516723283.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:23.438Z,1516723283.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:23.469Z,1516723283.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:01:23.470Z,1516723283.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:23.839Z,1516723283.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:23.909Z,1516723283.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:01:23.910Z,1516723283.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:24.239Z,1516723284.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:24.285Z,1516723284.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:01:24.286Z,1516723284.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:24.642Z,1516723284.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:24.695Z,1516723284.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:01:24.696Z,1516723284.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:25.054Z,1516723285.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:25.106Z,1516723285.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:01:25.107Z,1516723285.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:25.451Z,1516723285.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:25.466Z,1516723285.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:01:25.467Z,1516723285.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:25.862Z,1516723285.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:25.880Z,1516723285.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:01:25.881Z,1516723285.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:26.233Z,1516723286.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:26.259Z,1516723286.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:01:26.260Z,1516723286.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:26.636Z,1516723286.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:26.664Z,1516723286.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:01:26.665Z,1516723286.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:27.038Z,1516723287.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:27.068Z,1516723287.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:01:27.069Z,1516723287.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:27.439Z,1516723287.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:27.508Z,1516723287.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:27.846Z,1516723287.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:27.881Z,1516723287.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:28.245Z,1516723288.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:28.284Z,1516723288.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:28.670Z,1516723288.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:28.733Z,1516723288.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:29.049Z,1516723289.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:29.094Z,1516723289.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:29.444Z,1516723289.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:29.493Z,1516723289.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:29.843Z,1516723289.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:29.904Z,1516723289.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:30.245Z,1516723290.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:30.284Z,1516723290.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:30.645Z,1516723290.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:30.689Z,1516723290.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:31.065Z,1516723291.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:31.108Z,1516723291.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:31.454Z,1516723291.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:31.474Z,1516723291.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:31.854Z,1516723291.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:31.881Z,1516723291.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:32.260Z,1516723292.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:32.320Z,1516723292.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:32.644Z,1516723292.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:32.674Z,1516723292.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:33.038Z,1516723293.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:33.069Z,1516723293.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:33.439Z,1516723293.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:33.481Z,1516723293.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:33.838Z,1516723293.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:33.874Z,1516723293.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:34.253Z,1516723294.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:34.296Z,1516723294.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:34.661Z,1516723294.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:34.709Z,1516723294.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:35.057Z,1516723295.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:35.096Z,1516723295.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:35.443Z,1516723295.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:35.458Z,1516723295.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:35.846Z,1516723295.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:35.908Z,1516723295.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:36.247Z,1516723296.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:36.296Z,1516723296.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:36.646Z,1516723296.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:36.661Z,1516723296.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:37.057Z,1516723297.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:37.084Z,1516723297.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:37.473Z,1516723297.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:37.521Z,1516723297.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:37.858Z,1516723297.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:37.882Z,1516723297.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:38.239Z,1516723298.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:38.311Z,1516723298.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:38.664Z,1516723298.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:38.692Z,1516723298.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:39.038Z,1516723299.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:39.086Z,1516723299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:39.439Z,1516723299.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:39.482Z,1516723299.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:39.836Z,1516723299.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:39.853Z,1516723299.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:40.256Z,1516723300.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:40.281Z,1516723300.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:40.657Z,1516723300.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:40.683Z,1516723300.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:41.051Z,1516723301.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:41.087Z,1516723301.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:41.439Z,1516723301.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:41.454Z,1516723301.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:41.837Z,1516723301.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:41.864Z,1516723301.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:42.240Z,1516723302.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:42.255Z,1516723302.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:42.645Z,1516723302.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:42.661Z,1516723302.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:43.044Z,1516723303.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:43.059Z,1516723303.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:43.448Z,1516723303.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:43.463Z,1516723303.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:43.843Z,1516723303.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:43.858Z,1516723303.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:44.240Z,1516723304.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:44.267Z,1516723304.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:44.639Z,1516723304.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:44.658Z,1516723304.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:45.041Z,1516723305.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:45.056Z,1516723305.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:45.444Z,1516723305.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:45.458Z,1516723305.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:48.687Z,1516723308.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:48.702Z,1516723308.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:48.832Z,1516723308.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:48.847Z,1516723308.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:49.171Z,1516723309.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:49.218Z,1516723309.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:49.568Z,1516723309.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:49.595Z,1516723309.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:49.957Z,1516723309.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:49.997Z,1516723309.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:50.362Z,1516723310.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:50.377Z,1516723310.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:50.752Z,1516723310.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:50.775Z,1516723310.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:51.162Z,1516723311.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:51.225Z,1516723311.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:51.572Z,1516723311.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:51.603Z,1516723311.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:51.959Z,1516723311.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:51.983Z,1516723311.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:52.350Z,1516723312.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:52.381Z,1516723312.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:52.757Z,1516723312.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:52.772Z,1516723312.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:53.154Z,1516723313.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:53.173Z,1516723313.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:53.549Z,1516723313.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:53.572Z,1516723313.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:53.963Z,1516723313.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:53.978Z,1516723313.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:54.363Z,1516723314.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:54.378Z,1516723314.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:54.763Z,1516723314.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:54.778Z,1516723314.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:55.150Z,1516723315.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:55.181Z,1516723315.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:55.558Z,1516723315.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:55.573Z,1516723315.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:55.963Z,1516723315.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:55.988Z,1516723315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:56.368Z,1516723316.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:56.383Z,1516723316.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:56.761Z,1516723316.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:56.781Z,1516723316.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:57.146Z,1516723317.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:57.177Z,1516723317.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:57.545Z,1516723317.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:57.583Z,1516723317.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:57.955Z,1516723317.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:57.995Z,1516723317.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:58.367Z,1516723318.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:58.386Z,1516723318.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:58.755Z,1516723318.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:58.789Z,1516723318.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:59.145Z,1516723319.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:59.176Z,1516723319.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:59.544Z,1516723319.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:59.581Z,1516723319.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:01:59.959Z,1516723319.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:01:59.985Z,1516723319.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:00.359Z,1516723320.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:00.394Z,1516723320.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:00.755Z,1516723320.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:00.787Z,1516723320.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:01.157Z,1516723321.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:01.188Z,1516723321.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:01.552Z,1516723321.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:01.567Z,1516723321.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:01.967Z,1516723321.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:01.998Z,1516723321.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:02.363Z,1516723322.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:02.378Z,1516723322.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:02.755Z,1516723322.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:02.776Z,1516723322.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:03.154Z,1516723323.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:03.169Z,1516723323.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:03.550Z,1516723323.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:03.574Z,1516723323.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:03.959Z,1516723323.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:03.974Z,1516723323.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:04.359Z,1516723324.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:04.374Z,1516723324.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:04.758Z,1516723324.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:04.777Z,1516723324.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:05.157Z,1516723325.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:05.172Z,1516723325.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:05.552Z,1516723325.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:05.567Z,1516723325.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:05.958Z,1516723325.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:05.977Z,1516723325.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:06.358Z,1516723326.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:06.373Z,1516723326.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:06.771Z,1516723326.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:06.786Z,1516723326.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:07.152Z,1516723327.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:07.179Z,1516723327.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:07.557Z,1516723327.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:07.572Z,1516723327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:07.966Z,1516723327.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:07.981Z,1516723327.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:08.366Z,1516723328.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:08.389Z,1516723328.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:08.761Z,1516723328.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:08.792Z,1516723328.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:09.145Z,1516723329.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:09.177Z,1516723329.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:09.544Z,1516723329.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:09.580Z,1516723329.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:09.955Z,1516723329.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:09.989Z,1516723329.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:10.367Z,1516723330.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:10.385Z,1516723330.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:10.755Z,1516723330.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:10.793Z,1516723330.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:11.149Z,1516723331.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:11.189Z,1516723331.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:11.548Z,1516723331.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:11.584Z,1516723331.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:11.955Z,1516723331.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:11.981Z,1516723331.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:12.359Z,1516723332.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:12.395Z,1516723332.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:12.755Z,1516723332.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:12.781Z,1516723332.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:13.145Z,1516723333.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:13.160Z,1516723333.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:13.543Z,1516723333.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:13.558Z,1516723333.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:13.967Z,1516723333.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:13.997Z,1516723333.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:14.378Z,1516723334.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:14.400Z,1516723334.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:14.763Z,1516723334.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:14.789Z,1516723334.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:15.157Z,1516723335.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:15.188Z,1516723335.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:15.552Z,1516723335.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:15.573Z,1516723335.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:15.967Z,1516723335.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:15.999Z,1516723335.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:16.367Z,1516723336.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:16.398Z,1516723336.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:16.760Z,1516723336.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:16.775Z,1516723336.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:17.153Z,1516723337.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:17.168Z,1516723337.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:17.558Z,1516723337.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:17.573Z,1516723337.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:17.955Z,1516723337.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:17.971Z,1516723337.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:18.359Z,1516723338.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:18.400Z,1516723338.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:18.767Z,1516723338.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:18.799Z,1516723338.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:19.150Z,1516723339.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:19.177Z,1516723339.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:19.554Z,1516723339.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:19.568Z,1516723339.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:19.958Z,1516723339.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:19.973Z,1516723339.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:20.360Z,1516723340.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:20.375Z,1516723340.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:20.758Z,1516723340.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:20.774Z,1516723340.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:21.149Z,1516723341.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:21.178Z,1516723341.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:21.553Z,1516723341.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:21.568Z,1516723341.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:21.959Z,1516723341.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:21.974Z,1516723341.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:22.360Z,1516723342.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:22.381Z,1516723342.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:22.762Z,1516723342.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:22.777Z,1516723342.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:23.154Z,1516723343.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:23.169Z,1516723343.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:23.552Z,1516723343.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:23.566Z,1516723343.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:23.963Z,1516723343.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:23.979Z,1516723343.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:24.363Z,1516723344.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:24.377Z,1516723344.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:24.763Z,1516723344.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:24.778Z,1516723344.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:25.162Z,1516723345.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:25.177Z,1516723345.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:25.554Z,1516723345.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:25.569Z,1516723345.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:25.963Z,1516723345.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:25.978Z,1516723345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:26.362Z,1516723346.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:26.377Z,1516723346.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:26.764Z,1516723346.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:26.778Z,1516723346.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:27.149Z,1516723347.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:27.172Z,1516723347.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:27.552Z,1516723347.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:27.581Z,1516723347.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:27.967Z,1516723347.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:27.983Z,1516723347.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:28.366Z,1516723348.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:28.382Z,1516723348.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:28.762Z,1516723348.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:28.777Z,1516723348.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:29.154Z,1516723349.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:29.169Z,1516723349.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:29.548Z,1516723349.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:29.571Z,1516723349.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:29.962Z,1516723349.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:29.978Z,1516723349.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:30.367Z,1516723350.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:30.382Z,1516723350.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:30.763Z,1516723350.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:30.778Z,1516723350.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:31.148Z,1516723351.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:31.171Z,1516723351.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:31.555Z,1516723351.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:31.570Z,1516723351.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:31.948Z,1516723351.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:31.973Z,1516723351.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:32.363Z,1516723352.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:32.378Z,1516723352.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:32.768Z,1516723352.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:32.788Z,1516723352.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:33.162Z,1516723353.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:33.178Z,1516723353.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:33.549Z,1516723353.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:33.571Z,1516723353.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:33.955Z,1516723353.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:33.970Z,1516723353.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:34.352Z,1516723354.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:34.373Z,1516723354.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:34.748Z,1516723354.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:34.780Z,1516723354.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:35.166Z,1516723355.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:35.181Z,1516723355.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:35.567Z,1516723355.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:35.582Z,1516723355.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:35.963Z,1516723355.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:35.978Z,1516723355.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:36.351Z,1516723356.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:36.382Z,1516723356.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:36.742Z,1516723356.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:36.770Z,1516723356.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:37.157Z,1516723357.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:37.173Z,1516723357.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:37.545Z,1516723357.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:37.581Z,1516723357.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:37.948Z,1516723357.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:37.986Z,1516723357.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:38.355Z,1516723358.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:38.381Z,1516723358.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:38.759Z,1516723358.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:38.789Z,1516723358.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:39.155Z,1516723359.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:39.192Z,1516723359.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:39.544Z,1516723359.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:39.581Z,1516723359.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:39.944Z,1516723359.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:39.959Z,1516723359.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:40.353Z,1516723360.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:40.368Z,1516723360.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:40.752Z,1516723360.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:40.773Z,1516723360.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:41.163Z,1516723361.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:41.197Z,1516723361.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:41.567Z,1516723361.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:41.591Z,1516723361.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:41.967Z,1516723361.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:41.991Z,1516723361.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:42.357Z,1516723362.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:42.371Z,1516723362.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:42.745Z,1516723362.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:42.760Z,1516723362.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:43.156Z,1516723363.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:43.193Z,1516723363.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:43.552Z,1516723363.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:43.567Z,1516723363.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:43.949Z,1516723363.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:43.972Z,1516723363.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:44.356Z,1516723364.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:44.371Z,1516723364.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:44.759Z,1516723364.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:44.774Z,1516723364.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:45.156Z,1516723365.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:45.171Z,1516723365.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:45.548Z,1516723365.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:45.575Z,1516723365.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:48.653Z,1516723368.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:48.668Z,1516723368.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:48.765Z,1516723368.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:48.808Z,1516723368.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:49.131Z,1516723369.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:49.161Z,1516723369.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:49.543Z,1516723369.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:49.564Z,1516723369.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:49.927Z,1516723369.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:49.950Z,1516723369.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:50.320Z,1516723370.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:50.354Z,1516723370.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:50.720Z,1516723370.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:50.761Z,1516723370.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:51.110Z,1516723371.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:51.125Z,1516723371.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:51.515Z,1516723371.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:51.530Z,1516723371.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:51.913Z,1516723371.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:51.928Z,1516723371.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:52.323Z,1516723372.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:52.359Z,1516723372.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:52.727Z,1516723372.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:52.742Z,1516723372.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:53.131Z,1516723373.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:53.146Z,1516723373.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:53.517Z,1516723373.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:53.537Z,1516723373.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:53.915Z,1516723373.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:53.935Z,1516723373.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:54.317Z,1516723374.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:54.340Z,1516723374.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:54.712Z,1516723374.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:54.740Z,1516723374.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:55.136Z,1516723375.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:55.166Z,1516723375.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:55.523Z,1516723375.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:55.538Z,1516723375.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:55.922Z,1516723375.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:55.937Z,1516723375.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:56.317Z,1516723376.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:56.332Z,1516723376.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:56.717Z,1516723376.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:56.732Z,1516723376.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:57.112Z,1516723377.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:57.132Z,1516723377.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:57.516Z,1516723377.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:57.539Z,1516723377.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:57.914Z,1516723377.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:57.945Z,1516723377.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:58.323Z,1516723378.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:58.344Z,1516723378.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:58.726Z,1516723378.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:58.749Z,1516723378.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:59.131Z,1516723379.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:59.146Z,1516723379.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:59.518Z,1516723379.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:59.533Z,1516723379.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:02:59.911Z,1516723379.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:02:59.939Z,1516723379.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:00.310Z,1516723380.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:00.343Z,1516723380.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:00.707Z,1516723380.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:00.734Z,1516723380.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:01.124Z,1516723381.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:01.151Z,1516723381.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:01.532Z,1516723381.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:01.547Z,1516723381.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:01.926Z,1516723381.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:01.949Z,1516723381.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:02.312Z,1516723382.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:02.345Z,1516723382.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:02.708Z,1516723382.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:02.754Z,1516723382.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:03.106Z,1516723383.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:03.138Z,1516723383.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:03.509Z,1516723383.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:03.545Z,1516723383.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:03.908Z,1516723383.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:03.947Z,1516723383.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:04.320Z,1516723384.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:04.357Z,1516723384.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:04.727Z,1516723384.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:04.761Z,1516723384.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:05.119Z,1516723385.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:05.155Z,1516723385.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:05.508Z,1516723385.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:05.529Z,1516723385.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:05.916Z,1516723385.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:05.957Z,1516723385.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:06.317Z,1516723386.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:06.332Z,1516723386.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:06.710Z,1516723386.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:06.725Z,1516723386.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:07.131Z,1516723387.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:07.161Z,1516723387.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:07.542Z,1516723387.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:07.557Z,1516723387.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:07.927Z,1516723387.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:07.953Z,1516723387.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:08.317Z,1516723388.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:08.332Z,1516723388.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:08.713Z,1516723388.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:08.728Z,1516723388.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:09.114Z,1516723389.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:09.129Z,1516723389.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:09.517Z,1516723389.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:09.532Z,1516723389.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:09.913Z,1516723389.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:09.948Z,1516723389.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:10.320Z,1516723390.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:10.336Z,1516723390.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:10.728Z,1516723390.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:10.755Z,1516723390.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:11.119Z,1516723391.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:11.140Z,1516723391.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:11.518Z,1516723391.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:11.534Z,1516723391.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:11.915Z,1516723391.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:11.930Z,1516723391.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:12.317Z,1516723392.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:12.336Z,1516723392.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:12.714Z,1516723392.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:12.729Z,1516723392.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:13.119Z,1516723393.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:13.135Z,1516723393.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:13.523Z,1516723393.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:13.544Z,1516723393.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:13.924Z,1516723393.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:13.939Z,1516723393.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:14.316Z,1516723394.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:14.331Z,1516723394.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:14.717Z,1516723394.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:14.732Z,1516723394.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:15.112Z,1516723395.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:15.139Z,1516723395.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:15.516Z,1516723395.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:15.534Z,1516723395.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:15.917Z,1516723395.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:15.936Z,1516723395.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:16.321Z,1516723396.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:16.341Z,1516723396.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:16.723Z,1516723396.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:16.738Z,1516723396.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:17.122Z,1516723397.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:17.137Z,1516723397.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:17.516Z,1516723397.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:17.531Z,1516723397.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:17.916Z,1516723397.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:17.931Z,1516723397.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:18.318Z,1516723398.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:18.340Z,1516723398.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:18.712Z,1516723398.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:18.732Z,1516723398.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:19.121Z,1516723399.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:19.141Z,1516723399.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:19.523Z,1516723399.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:19.538Z,1516723399.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:19.924Z,1516723399.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:19.939Z,1516723399.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:20.316Z,1516723400.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:20.331Z,1516723400.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:20.717Z,1516723400.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:20.732Z,1516723400.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:21.112Z,1516723401.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:21.132Z,1516723401.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:21.513Z,1516723401.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:21.534Z,1516723401.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:21.917Z,1516723401.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:21.936Z,1516723401.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:22.321Z,1516723402.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:22.341Z,1516723402.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:22.727Z,1516723402.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:22.742Z,1516723402.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:23.122Z,1516723403.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:23.137Z,1516723403.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:23.520Z,1516723403.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:23.536Z,1516723403.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:23.916Z,1516723403.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:23.937Z,1516723403.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:24.318Z,1516723404.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:24.333Z,1516723404.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:24.712Z,1516723404.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:24.732Z,1516723404.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:25.122Z,1516723405.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:25.141Z,1516723405.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:25.527Z,1516723405.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:25.542Z,1516723405.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:25.922Z,1516723405.922 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:25.941Z,1516723405.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:26.316Z,1516723406.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:26.331Z,1516723406.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:26.717Z,1516723406.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:26.732Z,1516723406.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:27.112Z,1516723407.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:27.132Z,1516723407.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:27.513Z,1516723407.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:27.535Z,1516723407.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:27.917Z,1516723407.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:27.932Z,1516723407.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:28.322Z,1516723408.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:28.345Z,1516723408.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:28.727Z,1516723408.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:28.742Z,1516723408.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:29.123Z,1516723409.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:29.144Z,1516723409.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:29.519Z,1516723409.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:29.534Z,1516723409.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:29.917Z,1516723409.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:29.932Z,1516723409.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:30.323Z,1516723410.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:30.338Z,1516723410.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:30.712Z,1516723410.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:30.733Z,1516723410.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:31.123Z,1516723411.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:31.138Z,1516723411.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:31.524Z,1516723411.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:31.545Z,1516723411.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:31.924Z,1516723411.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:31.939Z,1516723411.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:32.322Z,1516723412.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:32.337Z,1516723412.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:32.718Z,1516723412.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:32.733Z,1516723412.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:33.116Z,1516723413.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:33.132Z,1516723413.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:33.516Z,1516723413.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:33.535Z,1516723413.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:33.917Z,1516723413.917 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:33.933Z,1516723413.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:34.321Z,1516723414.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:34.337Z,1516723414.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:34.723Z,1516723414.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:34.738Z,1516723414.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:35.122Z,1516723415.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:35.138Z,1516723415.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:35.512Z,1516723415.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:35.541Z,1516723415.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:35.921Z,1516723415.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:35.936Z,1516723415.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:36.316Z,1516723416.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:36.343Z,1516723416.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:36.713Z,1516723416.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:36.736Z,1516723416.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:37.127Z,1516723417.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:37.142Z,1516723417.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:37.531Z,1516723417.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:37.546Z,1516723417.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:37.927Z,1516723417.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:37.942Z,1516723417.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:38.315Z,1516723418.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:38.336Z,1516723418.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:38.730Z,1516723418.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:38.745Z,1516723418.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:39.127Z,1516723419.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:39.142Z,1516723419.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:39.531Z,1516723419.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:39.546Z,1516723419.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:39.924Z,1516723419.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:39.951Z,1516723419.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:40.309Z,1516723420.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:40.342Z,1516723420.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:40.707Z,1516723420.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:40.741Z,1516723420.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:41.127Z,1516723421.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:41.149Z,1516723421.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:41.528Z,1516723421.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:41.559Z,1516723421.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:41.928Z,1516723421.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:41.943Z,1516723421.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:42.317Z,1516723422.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:42.348Z,1516723422.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:42.709Z,1516723422.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:42.746Z,1516723422.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:43.123Z,1516723423.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:43.146Z,1516723423.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:43.532Z,1516723423.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:43.548Z,1516723423.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:43.923Z,1516723423.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:43.946Z,1516723423.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:44.309Z,1516723424.309 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:44.355Z,1516723424.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:44.709Z,1516723424.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:44.746Z,1516723424.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:45.119Z,1516723425.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:45.153Z,1516723425.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:45.531Z,1516723425.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:45.551Z,1516723425.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:45.919Z,1516723425.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:45.957Z,1516723425.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:49.011Z,1516723429.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:49.042Z,1516723429.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:49.130Z,1516723429.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:49.169Z,1516723429.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:49.507Z,1516723429.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:49.522Z,1516723429.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:49.903Z,1516723429.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:49.918Z,1516723429.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:50.298Z,1516723430.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:50.317Z,1516723430.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:50.696Z,1516723430.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:50.711Z,1516723430.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:51.093Z,1516723431.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:51.108Z,1516723431.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:51.492Z,1516723431.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:51.511Z,1516723431.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:51.892Z,1516723431.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:51.907Z,1516723431.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:52.298Z,1516723432.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:52.321Z,1516723432.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:52.698Z,1516723432.698 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:52.717Z,1516723432.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:53.098Z,1516723433.098 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:53.117Z,1516723433.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:53.493Z,1516723433.493 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:53.508Z,1516723433.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:53.892Z,1516723433.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:53.913Z,1516723433.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:54.292Z,1516723434.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:54.310Z,1516723434.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:54.693Z,1516723434.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:54.708Z,1516723434.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:55.097Z,1516723435.097 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:55.117Z,1516723435.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:55.119Z,1516723435.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:55.119Z,1516723435.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 255 2018-01-23T16:03:55.119Z,1516723435.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:03:55.151Z,1516723435.151 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:03:55.501Z,1516723435.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:55.521Z,1516723435.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:55.549Z,1516723435.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:03:55.549Z,1516723435.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 255 2018-01-23T16:03:55.904Z,1516723435.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:55.918Z,1516723435.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:55.920Z,1516723435.920 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:03:55.920Z,1516723435.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:03:55.921Z,1516723435.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:03:56.293Z,1516723436.293 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:56.308Z,1516723436.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:56.688Z,1516723436.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:56.711Z,1516723436.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:57.100Z,1516723437.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:57.129Z,1516723437.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:57.507Z,1516723437.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:57.522Z,1516723437.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:57.903Z,1516723437.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:57.918Z,1516723437.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:58.285Z,1516723438.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:58.321Z,1516723438.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:58.696Z,1516723438.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:58.715Z,1516723438.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:59.100Z,1516723439.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:59.127Z,1516723439.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:59.512Z,1516723439.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:59.526Z,1516723439.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:03:59.907Z,1516723439.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:03:59.922Z,1516723439.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:00.285Z,1516723440.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:00.316Z,1516723440.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:00.684Z,1516723440.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:00.718Z,1516723440.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:01.100Z,1516723441.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:01.130Z,1516723441.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:01.507Z,1516723441.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:01.522Z,1516723441.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:01.898Z,1516723441.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:01.931Z,1516723441.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:02.282Z,1516723442.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:02.314Z,1516723442.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:02.693Z,1516723442.693 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:02.719Z,1516723442.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:03.084Z,1516723443.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:03.122Z,1516723443.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:03.508Z,1516723443.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:03.523Z,1516723443.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:03.905Z,1516723443.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:03.932Z,1516723443.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:04.298Z,1516723444.298 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:04.324Z,1516723444.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:04.682Z,1516723444.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:04.697Z,1516723444.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:05.083Z,1516723445.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:05.121Z,1516723445.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:05.489Z,1516723445.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:05.504Z,1516723445.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:05.888Z,1516723445.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:05.925Z,1516723445.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:06.303Z,1516723446.303 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:06.329Z,1516723446.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:06.703Z,1516723446.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:06.738Z,1516723446.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:07.099Z,1516723447.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:07.126Z,1516723447.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:07.491Z,1516723447.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:07.513Z,1516723447.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:07.894Z,1516723447.894 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:07.910Z,1516723447.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:08.290Z,1516723448.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:08.305Z,1516723448.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:08.305Z,1516723448.305 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 255 2018-01-23T16:04:08.305Z,1516723448.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:04:08.307Z,1516723448.307 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:08.307Z,1516723448.307 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 255 2018-01-23T16:04:08.307Z,1516723448.307 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:04:08.336Z,1516723448.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:04:08.336Z,1516723448.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:04:08.699Z,1516723448.699 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:08.760Z,1516723448.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:04:08.760Z,1516723448.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 255 2018-01-23T16:04:08.760Z,1516723448.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:04:08.760Z,1516723448.760 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 255 2018-01-23T16:04:09.092Z,1516723449.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:09.118Z,1516723449.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:04:09.119Z,1516723449.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:04:09.119Z,1516723449.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:04:09.119Z,1516723449.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:04:09.120Z,1516723449.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:04:09.120Z,1516723449.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:04:09.504Z,1516723449.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:09.518Z,1516723449.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:04:09.519Z,1516723449.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:09.908Z,1516723449.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:09.928Z,1516723449.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:04:09.929Z,1516723449.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:10.304Z,1516723450.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:10.319Z,1516723450.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:04:10.320Z,1516723450.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:10.688Z,1516723450.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:10.711Z,1516723450.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:04:10.712Z,1516723450.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:11.087Z,1516723451.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:11.110Z,1516723451.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:04:11.111Z,1516723451.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:11.488Z,1516723451.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:11.524Z,1516723451.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:04:11.525Z,1516723451.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:11.884Z,1516723451.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:11.921Z,1516723451.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:04:11.922Z,1516723451.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:12.307Z,1516723452.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:12.322Z,1516723452.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:04:12.323Z,1516723452.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:12.710Z,1516723452.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:12.733Z,1516723452.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:04:12.734Z,1516723452.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:13.103Z,1516723453.103 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:13.118Z,1516723453.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:04:13.119Z,1516723453.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:13.484Z,1516723453.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:13.516Z,1516723453.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:04:13.517Z,1516723453.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:13.889Z,1516723453.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:13.911Z,1516723453.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:04:13.912Z,1516723453.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:14.286Z,1516723454.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:14.301Z,1516723454.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:04:14.302Z,1516723454.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:14.685Z,1516723454.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:14.700Z,1516723454.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:04:14.701Z,1516723454.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:15.092Z,1516723455.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:15.128Z,1516723455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:04:15.129Z,1516723455.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:15.507Z,1516723455.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:15.531Z,1516723455.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:04:15.532Z,1516723455.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:15.907Z,1516723455.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:15.931Z,1516723455.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:04:15.932Z,1516723455.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:16.311Z,1516723456.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:16.338Z,1516723456.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:04:16.339Z,1516723456.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:16.686Z,1516723456.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:16.704Z,1516723456.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:04:16.705Z,1516723456.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:17.090Z,1516723457.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:17.109Z,1516723457.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:04:17.110Z,1516723457.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:17.502Z,1516723457.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:17.517Z,1516723457.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:04:17.518Z,1516723457.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:17.893Z,1516723457.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:17.909Z,1516723457.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:04:17.910Z,1516723457.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:18.295Z,1516723458.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:18.311Z,1516723458.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:04:18.312Z,1516723458.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:18.708Z,1516723458.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:18.739Z,1516723458.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:04:18.740Z,1516723458.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:19.112Z,1516723459.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:19.143Z,1516723459.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:04:19.144Z,1516723459.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:19.500Z,1516723459.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:19.517Z,1516723459.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:04:19.518Z,1516723459.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:19.893Z,1516723459.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:19.908Z,1516723459.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:04:19.909Z,1516723459.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:20.288Z,1516723460.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:20.315Z,1516723460.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:04:20.316Z,1516723460.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:20.703Z,1516723460.703 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:20.718Z,1516723460.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:04:20.719Z,1516723460.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:21.106Z,1516723461.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:21.129Z,1516723461.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:04:21.130Z,1516723461.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:21.504Z,1516723461.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:21.524Z,1516723461.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:04:21.525Z,1516723461.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:21.908Z,1516723461.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:21.923Z,1516723461.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:04:21.924Z,1516723461.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:22.308Z,1516723462.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:22.322Z,1516723462.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:04:22.324Z,1516723462.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:22.696Z,1516723462.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:22.715Z,1516723462.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:04:22.716Z,1516723462.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:23.085Z,1516723463.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:23.122Z,1516723463.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:04:23.123Z,1516723463.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:23.500Z,1516723463.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:23.514Z,1516723463.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:04:23.515Z,1516723463.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:23.891Z,1516723463.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:23.914Z,1516723463.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:04:23.915Z,1516723463.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:24.310Z,1516723464.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:24.325Z,1516723464.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:04:24.326Z,1516723464.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:24.709Z,1516723464.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:24.726Z,1516723464.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:04:24.728Z,1516723464.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:25.104Z,1516723465.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:25.118Z,1516723465.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:04:25.119Z,1516723465.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:25.486Z,1516723465.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:25.517Z,1516723465.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:04:25.518Z,1516723465.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:25.901Z,1516723465.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:25.916Z,1516723465.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:04:25.917Z,1516723465.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:26.288Z,1516723466.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:26.321Z,1516723466.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:04:26.323Z,1516723466.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:26.685Z,1516723466.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:26.717Z,1516723466.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:04:26.718Z,1516723466.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:27.087Z,1516723467.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:27.123Z,1516723467.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:04:27.124Z,1516723467.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:27.511Z,1516723467.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:27.526Z,1516723467.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:04:27.527Z,1516723467.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:27.914Z,1516723467.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:27.933Z,1516723467.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:04:27.934Z,1516723467.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:28.307Z,1516723468.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:28.322Z,1516723468.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:28.686Z,1516723468.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:28.721Z,1516723468.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:29.100Z,1516723469.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:29.118Z,1516723469.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:29.489Z,1516723469.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:29.517Z,1516723469.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:29.885Z,1516723469.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:29.910Z,1516723469.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:30.301Z,1516723470.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:30.328Z,1516723470.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:30.711Z,1516723470.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:30.726Z,1516723470.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:31.111Z,1516723471.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:31.126Z,1516723471.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:31.484Z,1516723471.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:31.517Z,1516723471.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:31.886Z,1516723471.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:31.917Z,1516723471.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:32.287Z,1516723472.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:32.320Z,1516723472.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:32.705Z,1516723472.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:32.720Z,1516723472.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:33.088Z,1516723473.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:33.124Z,1516723473.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:33.137Z,1516723473.137 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:04:33.509Z,1516723473.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:33.524Z,1516723473.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:33.904Z,1516723473.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:33.925Z,1516723473.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:34.310Z,1516723474.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:34.340Z,1516723474.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:34.692Z,1516723474.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:34.719Z,1516723474.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:35.084Z,1516723475.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:35.113Z,1516723475.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:35.487Z,1516723475.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:35.507Z,1516723475.507 [PNI_TCM](ERROR): CRC does not match. Expected:0x49846 got:0x82 2018-01-23T16:04:35.525Z,1516723475.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:35.887Z,1516723475.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:35.914Z,1516723475.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:36.315Z,1516723476.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:36.330Z,1516723476.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:36.710Z,1516723476.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:36.725Z,1516723476.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:37.105Z,1516723477.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:37.125Z,1516723477.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:37.487Z,1516723477.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:37.521Z,1516723477.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:37.888Z,1516723477.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:37.922Z,1516723477.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:38.284Z,1516723478.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:38.321Z,1516723478.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:38.704Z,1516723478.704 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:38.711Z,1516723478.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x37028 got:0x37288 2018-01-23T16:04:38.737Z,1516723478.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:39.091Z,1516723479.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:39.118Z,1516723479.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:39.511Z,1516723479.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:39.526Z,1516723479.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:39.904Z,1516723479.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:39.928Z,1516723479.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:40.304Z,1516723480.304 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:40.331Z,1516723480.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:40.691Z,1516723480.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:40.717Z,1516723480.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:41.086Z,1516723481.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:41.121Z,1516723481.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:41.485Z,1516723481.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:41.521Z,1516723481.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:41.890Z,1516723481.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:41.918Z,1516723481.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:42.300Z,1516723482.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:42.322Z,1516723482.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:42.707Z,1516723482.707 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:42.722Z,1516723482.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:43.104Z,1516723483.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:43.125Z,1516723483.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:43.484Z,1516723483.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:43.513Z,1516723483.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:43.887Z,1516723483.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:43.907Z,1516723483.907 [PNI_TCM](ERROR): CRC does not match. Expected:0x21971 got:0x15601 2018-01-23T16:04:43.925Z,1516723483.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:44.287Z,1516723484.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:44.313Z,1516723484.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:44.685Z,1516723484.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:44.719Z,1516723484.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:44.722Z,1516723484.722 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T15:59:44.7Z 2018-01-23T16:04:44.722Z,1516723484.722 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:04:44.722Z,1516723484.722 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:04:45.084Z,1516723485.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:45.124Z,1516723485.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:45.627Z,1516723485.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:45.643Z,1516723485.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:45.907Z,1516723485.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:45.922Z,1516723485.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:48.991Z,1516723488.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:49.018Z,1516723489.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:49.103Z,1516723489.103 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0300.lzma 2018-01-23T16:04:49.123Z,1516723489.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:49.139Z,1516723489.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:49.465Z,1516723489.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:49.505Z,1516723489.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:49.842Z,1516723489.842 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0300.lzma.bak 2018-01-23T16:04:49.842Z,1516723489.842 [DataOverHttps](INFO): SBD MOMSN=7755830 2018-01-23T16:04:49.885Z,1516723489.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:49.904Z,1516723489.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:50.496Z,1516723490.496 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:04:50.496Z,1516723490.496 [NAL9602] Data Fault, FailCount= 5 2018-01-23T16:04:50.496Z,1516723490.496 [NAL9602](ERROR): Data Fault 2018-01-23T16:04:50.514Z,1516723490.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:50.549Z,1516723490.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:50.562Z,1516723490.562 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:04:50.563Z,1516723490.563 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T16:04:50.644Z,1516723490.644 [NAL9602](INFO): Powering down 2018-01-23T16:04:50.662Z,1516723490.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:50.705Z,1516723490.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:50.729Z,1516723490.729 [CBIT](INFO): Critical error at 20180123T160450 2018-01-23T16:04:53.756Z,1516723493.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:53.763Z,1516723493.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.763Z,1516723493.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.764Z,1516723493.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.764Z,1516723493.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.765Z,1516723493.765 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.765Z,1516723493.765 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.765Z,1516723493.765 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:04:53.812Z,1516723493.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:53.904Z,1516723493.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:53.919Z,1516723493.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:54.265Z,1516723494.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:54.304Z,1516723494.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:54.690Z,1516723494.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:54.718Z,1516723494.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:55.077Z,1516723495.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:55.092Z,1516723495.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:55.471Z,1516723495.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:55.501Z,1516723495.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:04:58.745Z,1516723498.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:04:58.774Z,1516723498.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:01.088Z,1516723501.088 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0301.lzma 2018-01-23T16:05:01.118Z,1516723501.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:01.142Z,1516723501.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:01.230Z,1516723501.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:01.273Z,1516723501.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:01.979Z,1516723501.979 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0301.lzma.bak 2018-01-23T16:05:01.979Z,1516723501.979 [DataOverHttps](INFO): SBD MOMSN=7755832 2018-01-23T16:05:02.030Z,1516723502.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:02.052Z,1516723502.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:02.421Z,1516723502.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:02.441Z,1516723502.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:02.444Z,1516723502.444 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:05:02.444Z,1516723502.444 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:05:02.444Z,1516723502.444 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:05:02.549Z,1516723502.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:02.593Z,1516723502.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:05.599Z,1516723505.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:05.624Z,1516723505.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:05.723Z,1516723505.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:05.768Z,1516723505.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:06.068Z,1516723506.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:06.093Z,1516723506.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:06.479Z,1516723506.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:06.494Z,1516723506.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:06.869Z,1516723506.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:06.885Z,1516723506.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:07.279Z,1516723507.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:07.294Z,1516723507.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:07.668Z,1516723507.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:07.703Z,1516723507.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:08.061Z,1516723508.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:08.085Z,1516723508.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:08.464Z,1516723508.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:08.495Z,1516723508.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:08.864Z,1516723508.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:08.879Z,1516723508.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:09.264Z,1516723509.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:09.279Z,1516723509.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:09.676Z,1516723509.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:09.707Z,1516723509.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:10.072Z,1516723510.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:10.087Z,1516723510.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:10.470Z,1516723510.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:10.486Z,1516723510.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:10.870Z,1516723510.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:10.885Z,1516723510.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:11.268Z,1516723511.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:11.305Z,1516723511.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:11.690Z,1516723511.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:11.714Z,1516723511.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:12.074Z,1516723512.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:12.089Z,1516723512.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:12.468Z,1516723512.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:12.496Z,1516723512.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:12.869Z,1516723512.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:12.884Z,1516723512.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:13.270Z,1516723513.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:13.285Z,1516723513.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:13.669Z,1516723513.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:13.694Z,1516723513.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:14.069Z,1516723514.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:14.085Z,1516723514.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:14.471Z,1516723514.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:14.494Z,1516723514.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:14.874Z,1516723514.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:14.889Z,1516723514.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:15.272Z,1516723515.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:15.288Z,1516723515.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:15.678Z,1516723515.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:15.694Z,1516723515.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:16.071Z,1516723516.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:16.086Z,1516723516.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:16.474Z,1516723516.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:16.490Z,1516723516.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:16.868Z,1516723516.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:16.897Z,1516723516.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:17.275Z,1516723517.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:17.290Z,1516723517.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:17.684Z,1516723517.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:17.700Z,1516723517.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:18.064Z,1516723518.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:18.089Z,1516723518.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:18.464Z,1516723518.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:18.500Z,1516723518.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:18.861Z,1516723518.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:18.901Z,1516723518.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:19.268Z,1516723519.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:19.295Z,1516723519.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:19.664Z,1516723519.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:19.697Z,1516723519.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:20.061Z,1516723520.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:20.085Z,1516723520.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:20.464Z,1516723520.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:20.478Z,1516723520.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:20.864Z,1516723520.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:20.908Z,1516723520.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:21.261Z,1516723521.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:21.277Z,1516723521.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:21.668Z,1516723521.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:21.682Z,1516723521.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:22.068Z,1516723522.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:22.083Z,1516723522.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:22.463Z,1516723522.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:22.478Z,1516723522.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:22.876Z,1516723522.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:22.890Z,1516723522.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:23.276Z,1516723523.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:23.290Z,1516723523.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:23.668Z,1516723523.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:23.683Z,1516723523.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:24.076Z,1516723524.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:24.090Z,1516723524.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:24.472Z,1516723524.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:24.487Z,1516723524.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:24.868Z,1516723524.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:24.883Z,1516723524.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:25.268Z,1516723525.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:25.296Z,1516723525.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:25.676Z,1516723525.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:25.691Z,1516723525.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:26.068Z,1516723526.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:26.083Z,1516723526.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:26.466Z,1516723526.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:26.496Z,1516723526.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:26.870Z,1516723526.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:26.885Z,1516723526.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:27.268Z,1516723527.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:27.284Z,1516723527.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:27.670Z,1516723527.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:27.685Z,1516723527.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:28.070Z,1516723528.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:28.085Z,1516723528.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:28.470Z,1516723528.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:28.485Z,1516723528.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:28.868Z,1516723528.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:28.894Z,1516723528.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:29.270Z,1516723529.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:29.285Z,1516723529.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:29.673Z,1516723529.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:29.688Z,1516723529.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:30.070Z,1516723530.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:30.092Z,1516723530.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:30.472Z,1516723530.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:30.487Z,1516723530.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:30.868Z,1516723530.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:30.884Z,1516723530.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:31.277Z,1516723531.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:31.291Z,1516723531.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:31.670Z,1516723531.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:31.685Z,1516723531.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:32.070Z,1516723532.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:32.086Z,1516723532.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:32.472Z,1516723532.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:32.486Z,1516723532.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:32.871Z,1516723532.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:32.886Z,1516723532.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:33.268Z,1516723533.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:33.286Z,1516723533.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:33.676Z,1516723533.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:33.691Z,1516723533.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:34.074Z,1516723534.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:34.089Z,1516723534.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:34.471Z,1516723534.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:34.486Z,1516723534.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:34.871Z,1516723534.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:34.892Z,1516723534.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:35.274Z,1516723535.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:35.289Z,1516723535.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:35.677Z,1516723535.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:35.692Z,1516723535.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:36.070Z,1516723536.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:36.097Z,1516723536.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:36.474Z,1516723536.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:36.489Z,1516723536.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:36.870Z,1516723536.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:36.890Z,1516723536.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:37.271Z,1516723537.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:37.286Z,1516723537.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:37.675Z,1516723537.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:37.696Z,1516723537.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:38.069Z,1516723538.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:38.084Z,1516723538.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:38.475Z,1516723538.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:38.496Z,1516723538.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:38.875Z,1516723538.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:38.890Z,1516723538.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:39.269Z,1516723539.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:39.306Z,1516723539.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:39.678Z,1516723539.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:39.693Z,1516723539.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:40.076Z,1516723540.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:40.091Z,1516723540.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:40.471Z,1516723540.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:40.486Z,1516723540.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:40.871Z,1516723540.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:40.892Z,1516723540.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:41.281Z,1516723541.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:41.296Z,1516723541.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:41.680Z,1516723541.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:41.695Z,1516723541.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:42.071Z,1516723542.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:42.092Z,1516723542.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:42.472Z,1516723542.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:42.491Z,1516723542.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:42.861Z,1516723542.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:42.893Z,1516723542.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:43.264Z,1516723543.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:43.289Z,1516723543.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:43.680Z,1516723543.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:43.695Z,1516723543.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:44.061Z,1516723544.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:44.104Z,1516723544.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:44.468Z,1516723544.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:44.494Z,1516723544.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:44.868Z,1516723544.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:44.901Z,1516723544.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:45.264Z,1516723545.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:45.296Z,1516723545.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:45.672Z,1516723545.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:45.698Z,1516723545.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:46.069Z,1516723546.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:46.108Z,1516723546.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:46.461Z,1516723546.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:46.477Z,1516723546.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:46.864Z,1516723546.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:46.881Z,1516723546.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:47.276Z,1516723547.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:47.315Z,1516723547.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:47.676Z,1516723547.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:47.708Z,1516723547.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:48.072Z,1516723548.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:48.086Z,1516723548.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:48.473Z,1516723548.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:48.489Z,1516723548.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:48.870Z,1516723548.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:48.886Z,1516723548.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:49.268Z,1516723549.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:49.294Z,1516723549.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:49.673Z,1516723549.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:49.693Z,1516723549.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:50.071Z,1516723550.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:50.086Z,1516723550.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:50.471Z,1516723550.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:50.485Z,1516723550.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:50.872Z,1516723550.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:50.887Z,1516723550.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:51.271Z,1516723551.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:51.286Z,1516723551.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:51.671Z,1516723551.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:51.685Z,1516723551.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:52.074Z,1516723552.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:52.089Z,1516723552.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:52.472Z,1516723552.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:52.487Z,1516723552.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:52.874Z,1516723552.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:52.888Z,1516723552.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:53.270Z,1516723553.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:53.294Z,1516723553.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:53.678Z,1516723553.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:53.694Z,1516723553.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:54.074Z,1516723554.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:54.089Z,1516723554.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:54.479Z,1516723554.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:54.494Z,1516723554.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:54.872Z,1516723554.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:54.888Z,1516723554.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:55.268Z,1516723555.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:55.301Z,1516723555.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:55.678Z,1516723555.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:55.694Z,1516723555.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:56.072Z,1516723556.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:56.089Z,1516723556.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:56.473Z,1516723556.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:56.489Z,1516723556.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:56.866Z,1516723556.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:56.898Z,1516723556.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:57.272Z,1516723557.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:57.287Z,1516723557.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:57.677Z,1516723557.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:57.692Z,1516723557.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:58.069Z,1516723558.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:58.084Z,1516723558.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:58.472Z,1516723558.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:58.493Z,1516723558.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:58.870Z,1516723558.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:58.892Z,1516723558.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:59.268Z,1516723559.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:59.284Z,1516723559.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:05:59.675Z,1516723559.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:05:59.691Z,1516723559.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:00.066Z,1516723560.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:00.097Z,1516723560.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:00.471Z,1516723560.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:00.486Z,1516723560.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:00.871Z,1516723560.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:00.886Z,1516723560.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:01.270Z,1516723561.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:01.292Z,1516723561.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:01.678Z,1516723561.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:01.693Z,1516723561.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:02.071Z,1516723562.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:02.086Z,1516723562.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:02.471Z,1516723562.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:02.492Z,1516723562.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:02.872Z,1516723562.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:02.887Z,1516723562.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:05.978Z,1516723565.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:05.993Z,1516723565.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:06.090Z,1516723566.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:06.106Z,1516723566.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:06.460Z,1516723566.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:06.485Z,1516723566.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:06.864Z,1516723566.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:06.890Z,1516723566.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:07.253Z,1516723567.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:07.276Z,1516723567.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:07.656Z,1516723567.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:07.670Z,1516723567.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:08.064Z,1516723568.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:08.098Z,1516723568.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:08.460Z,1516723568.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:08.491Z,1516723568.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:08.856Z,1516723568.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:08.870Z,1516723568.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:09.260Z,1516723569.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:09.275Z,1516723569.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:09.660Z,1516723569.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:09.675Z,1516723569.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:10.068Z,1516723570.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:10.082Z,1516723570.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:10.464Z,1516723570.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:10.478Z,1516723570.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:10.855Z,1516723570.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:10.870Z,1516723570.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:11.265Z,1516723571.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:11.279Z,1516723571.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:11.670Z,1516723571.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:11.685Z,1516723571.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:12.057Z,1516723572.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:12.073Z,1516723572.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:12.468Z,1516723572.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:12.482Z,1516723572.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:12.861Z,1516723572.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:12.876Z,1516723572.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:13.260Z,1516723573.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:13.275Z,1516723573.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:13.668Z,1516723573.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:13.682Z,1516723573.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:14.064Z,1516723574.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:14.079Z,1516723574.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:14.466Z,1516723574.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:14.482Z,1516723574.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:14.868Z,1516723574.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:14.882Z,1516723574.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:15.259Z,1516723575.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:15.280Z,1516723575.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:15.660Z,1516723575.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:15.676Z,1516723575.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:16.065Z,1516723576.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:16.080Z,1516723576.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:16.468Z,1516723576.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:16.483Z,1516723576.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:16.859Z,1516723576.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:16.875Z,1516723576.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:17.260Z,1516723577.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:17.296Z,1516723577.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:17.663Z,1516723577.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:17.684Z,1516723577.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:18.064Z,1516723578.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:18.079Z,1516723578.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:18.472Z,1516723578.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:18.486Z,1516723578.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:18.865Z,1516723578.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:18.881Z,1516723578.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:19.263Z,1516723579.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:19.278Z,1516723579.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:19.661Z,1516723579.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:19.696Z,1516723579.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:20.068Z,1516723580.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:20.083Z,1516723580.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:20.460Z,1516723580.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:20.479Z,1516723580.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:20.867Z,1516723580.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:20.882Z,1516723580.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:21.267Z,1516723581.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:21.283Z,1516723581.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:21.664Z,1516723581.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:21.680Z,1516723581.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:22.070Z,1516723582.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:22.084Z,1516723582.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:22.468Z,1516723582.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:22.483Z,1516723582.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:22.866Z,1516723582.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:22.882Z,1516723582.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:23.269Z,1516723583.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:23.284Z,1516723583.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:23.669Z,1516723583.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:23.684Z,1516723583.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:24.065Z,1516723584.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:24.080Z,1516723584.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:24.461Z,1516723584.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:24.492Z,1516723584.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:24.869Z,1516723584.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:24.885Z,1516723584.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:25.268Z,1516723585.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:25.284Z,1516723585.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:25.665Z,1516723585.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:25.680Z,1516723585.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:26.062Z,1516723586.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:26.086Z,1516723586.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:26.465Z,1516723586.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:26.480Z,1516723586.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:26.869Z,1516723586.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:26.884Z,1516723586.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:27.264Z,1516723587.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:27.285Z,1516723587.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:27.667Z,1516723587.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:27.682Z,1516723587.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:28.067Z,1516723588.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:28.081Z,1516723588.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:28.472Z,1516723588.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:28.487Z,1516723588.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:28.866Z,1516723588.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:28.882Z,1516723588.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:29.269Z,1516723589.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:29.285Z,1516723589.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:29.668Z,1516723589.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:29.683Z,1516723589.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:30.069Z,1516723590.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:30.084Z,1516723590.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:30.467Z,1516723590.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:30.483Z,1516723590.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:30.866Z,1516723590.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:30.893Z,1516723590.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:31.267Z,1516723591.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:31.282Z,1516723591.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:31.679Z,1516723591.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:31.693Z,1516723591.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:32.060Z,1516723592.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:32.084Z,1516723592.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:32.457Z,1516723592.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:32.487Z,1516723592.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:32.859Z,1516723592.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:32.889Z,1516723592.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:33.255Z,1516723593.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:33.287Z,1516723593.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:33.656Z,1516723593.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:33.700Z,1516723593.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:34.061Z,1516723594.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:34.082Z,1516723594.082 [PNI_TCM](ERROR): CRC does not match. Expected:0x58381 got:0x13514 2018-01-23T16:06:34.102Z,1516723594.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:34.458Z,1516723594.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:34.485Z,1516723594.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:34.858Z,1516723594.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:34.893Z,1516723594.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:35.256Z,1516723595.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:35.285Z,1516723595.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:35.660Z,1516723595.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:35.690Z,1516723595.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:36.057Z,1516723596.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:36.086Z,1516723596.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:36.458Z,1516723596.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:36.491Z,1516723596.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:36.856Z,1516723596.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:36.886Z,1516723596.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:37.256Z,1516723597.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:37.294Z,1516723597.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:37.657Z,1516723597.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:37.684Z,1516723597.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:38.055Z,1516723598.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:38.082Z,1516723598.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:38.456Z,1516723598.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:38.497Z,1516723598.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:38.856Z,1516723598.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:38.893Z,1516723598.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:39.253Z,1516723599.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:39.283Z,1516723599.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:39.661Z,1516723599.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:39.704Z,1516723599.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:40.071Z,1516723600.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:40.117Z,1516723600.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:40.458Z,1516723600.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:40.499Z,1516723600.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:40.857Z,1516723600.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:40.899Z,1516723600.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:41.283Z,1516723601.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:41.309Z,1516723601.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:41.662Z,1516723601.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:41.700Z,1516723601.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:42.067Z,1516723602.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:42.121Z,1516723602.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:42.484Z,1516723602.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:42.555Z,1516723602.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:42.864Z,1516723602.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:42.879Z,1516723602.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:43.264Z,1516723603.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:43.311Z,1516723603.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:43.668Z,1516723603.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:43.687Z,1516723603.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:44.089Z,1516723604.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:44.121Z,1516723604.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:44.469Z,1516723604.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:44.500Z,1516723604.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:44.860Z,1516723604.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:44.908Z,1516723604.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:45.257Z,1516723605.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:45.350Z,1516723605.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:45.658Z,1516723605.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:45.700Z,1516723605.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:46.088Z,1516723606.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:46.102Z,1516723606.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:46.462Z,1516723606.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:46.510Z,1516723606.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:46.862Z,1516723606.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:46.906Z,1516723606.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:47.261Z,1516723607.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:47.334Z,1516723607.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:47.661Z,1516723607.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:47.710Z,1516723607.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:48.062Z,1516723608.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:48.106Z,1516723608.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:48.461Z,1516723608.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:48.508Z,1516723608.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:48.861Z,1516723608.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:48.928Z,1516723608.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:49.261Z,1516723609.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:49.310Z,1516723609.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:49.673Z,1516723609.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:49.710Z,1516723609.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:50.073Z,1516723610.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:50.111Z,1516723610.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:50.462Z,1516723610.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:50.509Z,1516723610.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:50.559Z,1516723610.559 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T16:06:50.559Z,1516723610.559 [NAL9602] No Fault, FailCount= 5 2018-01-23T16:06:50.844Z,1516723610.844 [NAL9602](INFO): Powering up NAL9602 2018-01-23T16:06:50.863Z,1516723610.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:50.923Z,1516723610.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:51.274Z,1516723611.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:51.311Z,1516723611.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:51.666Z,1516723611.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:51.717Z,1516723611.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:52.065Z,1516723612.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:52.124Z,1516723612.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:52.470Z,1516723612.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:52.515Z,1516723612.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:52.869Z,1516723612.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:52.917Z,1516723612.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:53.287Z,1516723613.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:53.361Z,1516723613.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:53.669Z,1516723613.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:53.728Z,1516723613.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:54.069Z,1516723614.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:54.092Z,1516723614.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:54.469Z,1516723614.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:54.530Z,1516723614.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:54.865Z,1516723614.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:54.922Z,1516723614.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:55.271Z,1516723615.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:55.300Z,1516723615.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:55.670Z,1516723615.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:55.696Z,1516723615.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:56.065Z,1516723616.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:56.125Z,1516723616.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:56.127Z,1516723616.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:56.127Z,1516723616.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 256 2018-01-23T16:06:56.127Z,1516723616.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:06:56.202Z,1516723616.202 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:06:56.482Z,1516723616.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:56.536Z,1516723616.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:56.590Z,1516723616.590 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:06:56.590Z,1516723616.590 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 256 2018-01-23T16:06:56.868Z,1516723616.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:56.900Z,1516723616.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:56.901Z,1516723616.901 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:06:56.902Z,1516723616.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:06:56.902Z,1516723616.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:06:57.256Z,1516723617.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:57.293Z,1516723617.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:57.657Z,1516723617.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:57.688Z,1516723617.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:58.056Z,1516723618.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:58.092Z,1516723618.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:58.460Z,1516723618.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:58.487Z,1516723618.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:58.860Z,1516723618.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:58.891Z,1516723618.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:59.283Z,1516723619.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:59.314Z,1516723619.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:06:59.660Z,1516723619.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:06:59.694Z,1516723619.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:00.057Z,1516723620.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:00.092Z,1516723620.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:00.472Z,1516723620.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:00.491Z,1516723620.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:00.854Z,1516723620.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:00.881Z,1516723620.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:01.274Z,1516723621.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:01.289Z,1516723621.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:01.676Z,1516723621.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:01.702Z,1516723621.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:02.040Z,1516723622.040 [NAL9602](INFO): NAL9602 initialized 2018-01-23T16:07:02.057Z,1516723622.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:02.104Z,1516723622.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:02.456Z,1516723622.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:02.484Z,1516723622.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:02.889Z,1516723622.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:02.913Z,1516723622.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:03.284Z,1516723623.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:03.304Z,1516723623.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:06.387Z,1516723626.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:06.403Z,1516723626.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:06.514Z,1516723626.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:06.544Z,1516723626.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:06.854Z,1516723626.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:06.900Z,1516723626.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:07.250Z,1516723627.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:07.277Z,1516723627.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:07.648Z,1516723627.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:07.671Z,1516723627.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:08.048Z,1516723628.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:08.076Z,1516723628.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:08.452Z,1516723628.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:08.478Z,1516723628.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:08.862Z,1516723628.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:08.878Z,1516723628.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:09.265Z,1516723629.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:09.292Z,1516723629.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:09.293Z,1516723629.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 256 2018-01-23T16:07:09.293Z,1516723629.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:07:09.294Z,1516723629.294 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:09.299Z,1516723629.299 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 256 2018-01-23T16:07:09.299Z,1516723629.299 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:07:09.327Z,1516723629.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:07:09.327Z,1516723629.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:07:09.658Z,1516723629.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:09.720Z,1516723629.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:07:09.720Z,1516723629.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 256 2018-01-23T16:07:09.720Z,1516723629.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:07:09.720Z,1516723629.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 256 2018-01-23T16:07:10.044Z,1516723630.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:10.071Z,1516723630.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:07:10.071Z,1516723630.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:07:10.071Z,1516723630.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:07:10.072Z,1516723630.072 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:07:10.072Z,1516723630.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:07:10.073Z,1516723630.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:07:10.464Z,1516723630.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:10.484Z,1516723630.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:07:10.485Z,1516723630.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:10.845Z,1516723630.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:10.882Z,1516723630.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:07:10.883Z,1516723630.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:11.244Z,1516723631.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:11.271Z,1516723631.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:07:11.272Z,1516723631.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:11.656Z,1516723631.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:11.682Z,1516723631.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:07:11.684Z,1516723631.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:12.068Z,1516723632.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:12.083Z,1516723632.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:07:12.084Z,1516723632.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:12.455Z,1516723632.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:12.490Z,1516723632.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:07:12.492Z,1516723632.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:12.844Z,1516723632.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:12.880Z,1516723632.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:07:12.881Z,1516723632.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:13.244Z,1516723633.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:13.281Z,1516723633.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:07:13.282Z,1516723633.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:13.648Z,1516723633.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:13.681Z,1516723633.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:07:13.682Z,1516723633.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:14.045Z,1516723634.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:14.080Z,1516723634.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:07:14.081Z,1516723634.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:14.444Z,1516723634.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:14.481Z,1516723634.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:07:14.482Z,1516723634.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:14.867Z,1516723634.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:14.882Z,1516723634.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:07:14.883Z,1516723634.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:15.263Z,1516723635.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:15.285Z,1516723635.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:07:15.286Z,1516723635.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:15.655Z,1516723635.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:15.685Z,1516723635.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:07:15.685Z,1516723635.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:16.044Z,1516723636.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:16.080Z,1516723636.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:07:16.081Z,1516723636.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:16.444Z,1516723636.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:16.480Z,1516723636.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:07:16.481Z,1516723636.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:16.845Z,1516723636.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:16.881Z,1516723636.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:07:16.882Z,1516723636.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:17.248Z,1516723637.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:17.280Z,1516723637.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:07:17.281Z,1516723637.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:17.656Z,1516723637.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:17.688Z,1516723637.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:07:17.689Z,1516723637.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:18.068Z,1516723638.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:18.083Z,1516723638.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:07:18.084Z,1516723638.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:18.455Z,1516723638.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:18.488Z,1516723638.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:07:18.489Z,1516723638.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:18.844Z,1516723638.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:18.880Z,1516723638.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:07:18.881Z,1516723638.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:19.252Z,1516723639.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:19.279Z,1516723639.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:07:19.280Z,1516723639.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:19.645Z,1516723639.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:19.680Z,1516723639.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:07:19.681Z,1516723639.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:20.049Z,1516723640.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:20.080Z,1516723640.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:07:20.081Z,1516723640.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:20.444Z,1516723640.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:20.481Z,1516723640.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:07:20.482Z,1516723640.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:20.855Z,1516723640.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:20.881Z,1516723640.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:07:20.882Z,1516723640.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:21.267Z,1516723641.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:21.285Z,1516723641.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:07:21.286Z,1516723641.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:21.655Z,1516723641.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:21.691Z,1516723641.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:07:21.692Z,1516723641.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:22.044Z,1516723642.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:22.080Z,1516723642.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:07:22.081Z,1516723642.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:22.444Z,1516723642.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:22.480Z,1516723642.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:07:22.481Z,1516723642.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:22.845Z,1516723642.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:22.881Z,1516723642.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:07:22.882Z,1516723642.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:23.248Z,1516723643.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:23.280Z,1516723643.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:07:23.281Z,1516723643.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:23.656Z,1516723643.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:23.688Z,1516723643.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:07:23.689Z,1516723643.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:24.072Z,1516723644.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:24.086Z,1516723644.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:07:24.087Z,1516723644.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:24.455Z,1516723644.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:24.492Z,1516723644.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:07:24.493Z,1516723644.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:24.847Z,1516723644.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:24.884Z,1516723644.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:07:24.885Z,1516723644.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:25.244Z,1516723645.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:25.289Z,1516723645.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:07:25.290Z,1516723645.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:25.649Z,1516723645.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:25.684Z,1516723645.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:07:25.685Z,1516723645.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:26.049Z,1516723646.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:26.084Z,1516723646.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:07:26.085Z,1516723646.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:26.443Z,1516723646.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:26.488Z,1516723646.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:07:26.489Z,1516723646.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:26.859Z,1516723646.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:26.885Z,1516723646.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:07:26.886Z,1516723646.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:27.259Z,1516723647.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:27.292Z,1516723647.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:07:27.293Z,1516723647.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:27.655Z,1516723647.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:27.682Z,1516723647.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:07:27.683Z,1516723647.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:28.045Z,1516723648.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:28.080Z,1516723648.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:07:28.081Z,1516723648.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:28.452Z,1516723648.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:28.488Z,1516723648.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:07:28.489Z,1516723648.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:28.845Z,1516723648.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:28.864Z,1516723648.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:07:28.865Z,1516723648.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:29.249Z,1516723649.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:29.284Z,1516723649.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:07:29.285Z,1516723649.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:29.667Z,1516723649.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:29.697Z,1516723649.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:30.063Z,1516723650.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:30.089Z,1516723650.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:30.468Z,1516723650.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:30.497Z,1516723650.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:30.856Z,1516723650.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:30.891Z,1516723650.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:31.249Z,1516723651.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:31.268Z,1516723651.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:31.653Z,1516723651.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:31.689Z,1516723651.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:32.053Z,1516723652.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:32.068Z,1516723652.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:32.452Z,1516723652.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:32.467Z,1516723652.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:32.859Z,1516723652.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:32.875Z,1516723652.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:33.259Z,1516723653.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:33.274Z,1516723653.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:33.655Z,1516723653.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:33.670Z,1516723653.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:34.050Z,1516723654.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:34.073Z,1516723654.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:34.451Z,1516723654.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:34.466Z,1516723654.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:34.853Z,1516723654.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:34.868Z,1516723654.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:35.252Z,1516723655.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:35.267Z,1516723655.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:35.656Z,1516723655.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:35.671Z,1516723655.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:36.059Z,1516723656.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:36.074Z,1516723656.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:36.467Z,1516723656.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:36.498Z,1516723656.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:36.850Z,1516723656.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:36.873Z,1516723656.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:37.257Z,1516723657.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:37.272Z,1516723657.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:37.655Z,1516723657.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:37.676Z,1516723657.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:38.049Z,1516723658.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:38.076Z,1516723658.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:38.456Z,1516723658.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:38.470Z,1516723658.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:38.863Z,1516723658.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:38.878Z,1516723658.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:39.264Z,1516723659.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:39.291Z,1516723659.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:39.668Z,1516723659.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:39.683Z,1516723659.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:40.048Z,1516723660.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:40.079Z,1516723660.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:40.448Z,1516723660.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:40.476Z,1516723660.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:40.845Z,1516723660.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:40.880Z,1516723660.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:41.248Z,1516723661.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:41.282Z,1516723661.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:41.656Z,1516723661.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:41.694Z,1516723661.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:42.071Z,1516723662.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:42.086Z,1516723662.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:42.455Z,1516723662.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:42.489Z,1516723662.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:42.845Z,1516723662.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:42.882Z,1516723662.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:43.245Z,1516723663.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:43.284Z,1516723663.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:43.652Z,1516723663.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:43.683Z,1516723663.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:44.054Z,1516723664.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:44.089Z,1516723664.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:44.445Z,1516723664.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:44.485Z,1516723664.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:44.856Z,1516723664.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:44.888Z,1516723664.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:45.264Z,1516723665.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:45.289Z,1516723665.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:45.656Z,1516723665.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:45.689Z,1516723665.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:46.043Z,1516723666.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:46.071Z,1516723666.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:46.452Z,1516723666.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:46.467Z,1516723666.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:46.853Z,1516723666.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:46.872Z,1516723666.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:47.249Z,1516723667.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:47.265Z,1516723667.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:47.656Z,1516723667.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:47.672Z,1516723667.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:48.059Z,1516723668.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:48.074Z,1516723668.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:48.455Z,1516723668.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:48.470Z,1516723668.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:48.852Z,1516723668.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:48.866Z,1516723668.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:49.253Z,1516723669.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:49.267Z,1516723669.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:49.651Z,1516723669.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:49.672Z,1516723669.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:50.052Z,1516723670.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:50.066Z,1516723670.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:50.452Z,1516723670.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:50.467Z,1516723670.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:50.856Z,1516723670.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:50.871Z,1516723670.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:51.259Z,1516723671.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:51.274Z,1516723671.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:51.655Z,1516723671.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:51.676Z,1516723671.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:52.048Z,1516723672.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:52.068Z,1516723672.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:52.448Z,1516723672.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:52.477Z,1516723672.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:52.854Z,1516723672.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:52.869Z,1516723672.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:53.252Z,1516723673.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:53.267Z,1516723673.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:53.658Z,1516723673.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:53.677Z,1516723673.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:54.059Z,1516723674.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:54.074Z,1516723674.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:54.458Z,1516723674.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:54.477Z,1516723674.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:54.852Z,1516723674.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:54.867Z,1516723674.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:55.253Z,1516723675.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:55.267Z,1516723675.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:55.657Z,1516723675.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:55.672Z,1516723675.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:56.052Z,1516723676.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:56.070Z,1516723676.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:56.453Z,1516723676.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:56.468Z,1516723676.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:56.857Z,1516723676.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:56.877Z,1516723676.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:57.263Z,1516723677.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:57.278Z,1516723677.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:57.659Z,1516723677.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:57.673Z,1516723677.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:58.045Z,1516723678.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:58.072Z,1516723678.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:58.452Z,1516723678.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:58.470Z,1516723678.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:58.854Z,1516723678.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:58.876Z,1516723678.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:59.249Z,1516723679.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:59.268Z,1516723679.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:07:59.658Z,1516723679.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:07:59.685Z,1516723679.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:00.066Z,1516723680.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:00.081Z,1516723680.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:00.463Z,1516723680.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:00.478Z,1516723680.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:00.848Z,1516723680.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:00.870Z,1516723680.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:01.254Z,1516723681.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:01.276Z,1516723681.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:01.648Z,1516723681.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:01.670Z,1516723681.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:02.049Z,1516723682.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:02.071Z,1516723682.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:02.453Z,1516723682.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:02.472Z,1516723682.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:02.862Z,1516723682.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:02.877Z,1516723682.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:03.266Z,1516723683.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:03.285Z,1516723683.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:03.667Z,1516723683.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:03.688Z,1516723683.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:06.767Z,1516723686.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:06.782Z,1516723686.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:06.889Z,1516723686.889 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:06.933Z,1516723686.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:07.266Z,1516723687.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:07.285Z,1516723687.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:07.671Z,1516723687.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:07.686Z,1516723687.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:08.065Z,1516723688.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:08.084Z,1516723688.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:08.463Z,1516723688.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:08.478Z,1516723688.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:08.858Z,1516723688.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:08.873Z,1516723688.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:09.256Z,1516723689.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:09.271Z,1516723689.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:09.664Z,1516723689.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:09.691Z,1516723689.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:10.070Z,1516723690.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:10.085Z,1516723690.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:10.470Z,1516723690.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:10.485Z,1516723690.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:10.860Z,1516723690.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:10.881Z,1516723690.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:11.257Z,1516723691.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:11.272Z,1516723691.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:11.653Z,1516723691.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:11.675Z,1516723691.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:12.053Z,1516723692.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:12.075Z,1516723692.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:12.457Z,1516723692.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:12.476Z,1516723692.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:12.870Z,1516723692.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:12.885Z,1516723692.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:13.270Z,1516723693.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:13.293Z,1516723693.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:13.671Z,1516723693.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:13.692Z,1516723693.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:14.060Z,1516723694.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:14.081Z,1516723694.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:14.452Z,1516723694.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:14.474Z,1516723694.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:14.858Z,1516723694.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:14.876Z,1516723694.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:15.260Z,1516723695.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:15.275Z,1516723695.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:15.666Z,1516723695.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:15.681Z,1516723695.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:16.071Z,1516723696.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:16.085Z,1516723696.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:16.471Z,1516723696.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:16.486Z,1516723696.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:16.856Z,1516723696.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:16.876Z,1516723696.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:17.258Z,1516723697.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:17.273Z,1516723697.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:17.667Z,1516723697.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:17.682Z,1516723697.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:18.071Z,1516723698.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:18.086Z,1516723698.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:18.471Z,1516723698.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:18.485Z,1516723698.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:18.849Z,1516723698.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:18.881Z,1516723698.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:19.249Z,1516723699.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:19.285Z,1516723699.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:19.649Z,1516723699.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:19.684Z,1516723699.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:20.054Z,1516723700.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:20.081Z,1516723700.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:20.448Z,1516723700.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:20.485Z,1516723700.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:20.870Z,1516723700.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:20.885Z,1516723700.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:21.272Z,1516723701.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:21.287Z,1516723701.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:21.663Z,1516723701.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:21.697Z,1516723701.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:22.051Z,1516723702.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:22.081Z,1516723702.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:22.449Z,1516723702.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:22.481Z,1516723702.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:22.853Z,1516723702.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:22.886Z,1516723702.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:23.249Z,1516723703.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:23.288Z,1516723703.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:23.672Z,1516723703.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:23.693Z,1516723703.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:24.068Z,1516723704.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:24.090Z,1516723704.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:24.460Z,1516723704.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:24.496Z,1516723704.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:24.850Z,1516723704.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:24.878Z,1516723704.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:25.249Z,1516723705.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:25.265Z,1516723705.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:25.660Z,1516723705.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:25.700Z,1516723705.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:26.060Z,1516723706.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:26.088Z,1516723706.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:26.468Z,1516723706.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:26.501Z,1516723706.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:26.853Z,1516723706.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:26.869Z,1516723706.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:27.253Z,1516723707.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:27.269Z,1516723707.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:27.663Z,1516723707.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:27.701Z,1516723707.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:28.072Z,1516723708.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:28.086Z,1516723708.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:28.464Z,1516723708.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:28.479Z,1516723708.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:28.856Z,1516723708.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:28.874Z,1516723708.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:29.257Z,1516723709.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:29.272Z,1516723709.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:29.662Z,1516723709.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:29.677Z,1516723709.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:30.063Z,1516723710.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:30.085Z,1516723710.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:30.467Z,1516723710.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:30.481Z,1516723710.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:30.856Z,1516723710.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:30.875Z,1516723710.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:31.252Z,1516723711.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:31.270Z,1516723711.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:31.667Z,1516723711.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:31.682Z,1516723711.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:32.066Z,1516723712.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:32.081Z,1516723712.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:32.466Z,1516723712.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:32.481Z,1516723712.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:32.858Z,1516723712.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:32.876Z,1516723712.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:33.246Z,1516723713.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:33.277Z,1516723713.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:33.671Z,1516723713.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:33.686Z,1516723713.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:34.072Z,1516723714.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:34.086Z,1516723714.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:34.467Z,1516723714.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:34.482Z,1516723714.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:34.849Z,1516723714.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:34.875Z,1516723714.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:35.248Z,1516723715.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:35.284Z,1516723715.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:35.669Z,1516723715.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:35.684Z,1516723715.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:36.070Z,1516723716.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:36.085Z,1516723716.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:36.465Z,1516723716.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:36.492Z,1516723716.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:36.861Z,1516723716.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:36.876Z,1516723716.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:37.248Z,1516723717.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:37.280Z,1516723717.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:37.671Z,1516723717.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:37.686Z,1516723717.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:38.067Z,1516723718.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:38.082Z,1516723718.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:38.467Z,1516723718.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:38.482Z,1516723718.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:38.849Z,1516723718.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:38.876Z,1516723718.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:39.246Z,1516723719.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:39.277Z,1516723719.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:39.671Z,1516723719.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:39.686Z,1516723719.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:40.071Z,1516723720.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:40.093Z,1516723720.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:40.467Z,1516723720.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:40.482Z,1516723720.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:40.849Z,1516723720.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:40.881Z,1516723720.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:41.248Z,1516723721.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:41.284Z,1516723721.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:41.667Z,1516723721.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:41.691Z,1516723721.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:42.069Z,1516723722.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:42.089Z,1516723722.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:42.458Z,1516723722.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:42.484Z,1516723722.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:42.849Z,1516723722.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:42.877Z,1516723722.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:43.248Z,1516723723.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:43.284Z,1516723723.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:43.659Z,1516723723.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:43.694Z,1516723723.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:44.059Z,1516723724.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:44.092Z,1516723724.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:44.459Z,1516723724.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:44.485Z,1516723724.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:44.849Z,1516723724.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:44.886Z,1516723724.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:45.246Z,1516723725.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:45.261Z,1516723725.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:45.659Z,1516723725.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:45.685Z,1516723725.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:46.063Z,1516723726.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:46.093Z,1516723726.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:46.463Z,1516723726.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:46.489Z,1516723726.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:46.849Z,1516723726.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:46.864Z,1516723726.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:47.252Z,1516723727.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:47.267Z,1516723727.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:47.664Z,1516723727.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:47.695Z,1516723727.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:48.075Z,1516723728.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:48.105Z,1516723728.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:48.470Z,1516723728.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:48.500Z,1516723728.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:48.850Z,1516723728.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:48.869Z,1516723728.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:49.260Z,1516723729.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:49.301Z,1516723729.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:49.666Z,1516723729.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:49.681Z,1516723729.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:50.059Z,1516723730.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:50.074Z,1516723730.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:50.463Z,1516723730.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:50.478Z,1516723730.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:50.857Z,1516723730.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:50.872Z,1516723730.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:51.253Z,1516723731.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:51.268Z,1516723731.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:51.659Z,1516723731.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:51.674Z,1516723731.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:52.063Z,1516723732.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:52.078Z,1516723732.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:52.471Z,1516723732.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:52.502Z,1516723732.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:52.856Z,1516723732.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:52.870Z,1516723732.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:53.257Z,1516723733.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:53.271Z,1516723733.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:53.652Z,1516723733.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:53.675Z,1516723733.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:54.062Z,1516723734.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:54.081Z,1516723734.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:54.463Z,1516723734.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:54.478Z,1516723734.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:54.862Z,1516723734.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:54.877Z,1516723734.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:55.257Z,1516723735.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:55.272Z,1516723735.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:55.652Z,1516723735.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:55.686Z,1516723735.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:56.056Z,1516723736.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:56.075Z,1516723736.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:56.462Z,1516723736.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:56.481Z,1516723736.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:56.863Z,1516723736.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:56.878Z,1516723736.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:57.262Z,1516723737.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:57.277Z,1516723737.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:57.675Z,1516723737.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:57.690Z,1516723737.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:58.062Z,1516723738.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:58.077Z,1516723738.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:58.458Z,1516723738.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:58.473Z,1516723738.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:58.857Z,1516723738.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:58.876Z,1516723738.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:59.259Z,1516723739.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:59.273Z,1516723739.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:08:59.659Z,1516723739.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:08:59.674Z,1516723739.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:00.062Z,1516723740.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:00.094Z,1516723740.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:00.467Z,1516723740.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:00.482Z,1516723740.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:00.864Z,1516723740.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:00.892Z,1516723740.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:01.261Z,1516723741.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:01.276Z,1516723741.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:01.662Z,1516723741.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:01.684Z,1516723741.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:02.054Z,1516723742.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:02.078Z,1516723742.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:02.449Z,1516723742.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:02.485Z,1516723742.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:02.872Z,1516723742.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:02.888Z,1516723742.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:03.264Z,1516723743.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:03.288Z,1516723743.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:03.664Z,1516723743.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:03.696Z,1516723743.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:06.764Z,1516723746.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:06.779Z,1516723746.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:06.880Z,1516723746.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:06.925Z,1516723746.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:07.231Z,1516723747.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:07.246Z,1516723747.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:07.647Z,1516723747.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:07.677Z,1516723747.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:08.032Z,1516723748.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:08.046Z,1516723748.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:08.428Z,1516723748.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:08.442Z,1516723748.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:08.826Z,1516723748.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:08.853Z,1516723748.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:09.227Z,1516723749.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:09.242Z,1516723749.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:09.626Z,1516723749.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:09.649Z,1516723749.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:10.031Z,1516723750.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:10.046Z,1516723750.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:10.435Z,1516723750.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:10.450Z,1516723750.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:10.832Z,1516723750.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:10.846Z,1516723750.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:11.229Z,1516723751.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:11.244Z,1516723751.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:11.628Z,1516723751.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:11.675Z,1516723751.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:12.031Z,1516723752.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:12.046Z,1516723752.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:12.429Z,1516723752.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:12.443Z,1516723752.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:12.833Z,1516723752.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:12.853Z,1516723752.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:13.235Z,1516723753.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:13.250Z,1516723753.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:13.634Z,1516723753.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:13.650Z,1516723753.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:14.024Z,1516723754.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:14.044Z,1516723754.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:14.432Z,1516723754.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:14.453Z,1516723754.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:14.829Z,1516723754.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:14.844Z,1516723754.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:15.229Z,1516723755.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:15.244Z,1516723755.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:15.628Z,1516723755.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:15.643Z,1516723755.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:16.034Z,1516723756.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:16.056Z,1516723756.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:16.439Z,1516723756.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:16.455Z,1516723756.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:16.834Z,1516723756.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:16.853Z,1516723756.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:17.229Z,1516723757.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:17.244Z,1516723757.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:17.631Z,1516723757.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:17.647Z,1516723757.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:18.028Z,1516723758.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:18.046Z,1516723758.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:18.429Z,1516723758.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:18.444Z,1516723758.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:18.833Z,1516723758.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:18.853Z,1516723758.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:19.237Z,1516723759.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:19.257Z,1516723759.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:19.639Z,1516723759.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:19.654Z,1516723759.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:20.025Z,1516723760.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:20.045Z,1516723760.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:20.424Z,1516723760.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:20.451Z,1516723760.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:20.830Z,1516723760.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:20.848Z,1516723760.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:21.229Z,1516723761.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:21.245Z,1516723761.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:21.623Z,1516723761.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:21.654Z,1516723761.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:22.040Z,1516723762.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:22.055Z,1516723762.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:22.442Z,1516723762.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:22.461Z,1516723762.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:22.842Z,1516723762.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:22.857Z,1516723762.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:23.230Z,1516723763.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:23.249Z,1516723763.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:23.632Z,1516723763.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:23.653Z,1516723763.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:24.037Z,1516723764.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:24.052Z,1516723764.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:24.429Z,1516723764.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:24.460Z,1516723764.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:24.836Z,1516723764.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:24.857Z,1516723764.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:25.243Z,1516723765.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:25.258Z,1516723765.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:25.638Z,1516723765.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:25.661Z,1516723765.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:26.018Z,1516723766.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:26.053Z,1516723766.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:26.421Z,1516723766.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:26.453Z,1516723766.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:26.821Z,1516723766.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:26.857Z,1516723766.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:27.219Z,1516723767.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:27.234Z,1516723767.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:27.621Z,1516723767.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:27.641Z,1516723767.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:28.039Z,1516723768.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:28.067Z,1516723768.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:28.439Z,1516723768.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:28.465Z,1516723768.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:28.843Z,1516723768.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:28.869Z,1516723768.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:29.233Z,1516723769.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:29.264Z,1516723769.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:29.625Z,1516723769.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:29.661Z,1516723769.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:30.028Z,1516723770.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:30.043Z,1516723770.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:30.425Z,1516723770.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:30.449Z,1516723770.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:30.832Z,1516723770.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:30.847Z,1516723770.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:31.235Z,1516723771.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:31.250Z,1516723771.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:31.644Z,1516723771.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:31.679Z,1516723771.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:32.025Z,1516723772.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:32.044Z,1516723772.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:32.426Z,1516723772.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:32.449Z,1516723772.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:32.830Z,1516723772.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:32.846Z,1516723772.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:33.228Z,1516723773.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:33.243Z,1516723773.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:33.626Z,1516723773.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:33.650Z,1516723773.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:34.036Z,1516723774.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:34.057Z,1516723774.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:34.438Z,1516723774.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:34.453Z,1516723774.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:34.839Z,1516723774.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:34.854Z,1516723774.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:35.231Z,1516723775.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:35.246Z,1516723775.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:35.630Z,1516723775.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:35.656Z,1516723775.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:36.028Z,1516723776.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:36.049Z,1516723776.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:36.425Z,1516723776.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:36.449Z,1516723776.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:36.840Z,1516723776.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:36.854Z,1516723776.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:37.243Z,1516723777.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:37.264Z,1516723777.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:37.641Z,1516723777.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:37.661Z,1516723777.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:38.033Z,1516723778.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:38.053Z,1516723778.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:38.439Z,1516723778.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:38.461Z,1516723778.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:38.828Z,1516723778.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:38.855Z,1516723778.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:39.222Z,1516723779.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:39.249Z,1516723779.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:39.621Z,1516723779.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:39.660Z,1516723779.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:40.042Z,1516723780.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:40.066Z,1516723780.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:40.445Z,1516723780.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:40.460Z,1516723780.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:40.842Z,1516723780.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:40.857Z,1516723780.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:41.222Z,1516723781.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:41.253Z,1516723781.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:41.621Z,1516723781.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:41.662Z,1516723781.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:42.021Z,1516723782.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:42.037Z,1516723782.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:42.425Z,1516723782.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:42.441Z,1516723782.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:42.840Z,1516723782.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:42.864Z,1516723782.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:43.255Z,1516723783.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:43.277Z,1516723783.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:43.640Z,1516723783.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:43.665Z,1516723783.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:44.037Z,1516723784.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:44.068Z,1516723784.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:44.433Z,1516723784.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:44.464Z,1516723784.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:44.829Z,1516723784.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:44.843Z,1516723784.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:45.231Z,1516723785.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:45.246Z,1516723785.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:45.626Z,1516723785.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:45.646Z,1516723785.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:46.040Z,1516723786.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:46.055Z,1516723786.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:46.442Z,1516723786.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:46.465Z,1516723786.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:46.840Z,1516723786.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:46.854Z,1516723786.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:47.221Z,1516723787.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:47.249Z,1516723787.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:47.621Z,1516723787.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:47.648Z,1516723787.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:48.021Z,1516723788.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:48.048Z,1516723788.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:48.424Z,1516723788.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:48.465Z,1516723788.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:48.836Z,1516723788.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:48.862Z,1516723788.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:49.235Z,1516723789.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:49.269Z,1516723789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:49.631Z,1516723789.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:49.659Z,1516723789.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:50.025Z,1516723790.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:50.060Z,1516723790.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:50.421Z,1516723790.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:50.435Z,1516723790.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:50.821Z,1516723790.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:50.840Z,1516723790.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:51.225Z,1516723791.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:51.241Z,1516723791.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:51.629Z,1516723791.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:51.644Z,1516723791.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:52.038Z,1516723792.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:52.075Z,1516723792.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:52.443Z,1516723792.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:52.467Z,1516723792.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:52.843Z,1516723792.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:52.867Z,1516723792.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:53.232Z,1516723793.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:53.247Z,1516723793.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:53.629Z,1516723793.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:53.649Z,1516723793.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:54.030Z,1516723794.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:54.045Z,1516723794.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:54.428Z,1516723794.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:54.443Z,1516723794.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:54.836Z,1516723794.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:54.874Z,1516723794.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:55.239Z,1516723795.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:55.254Z,1516723795.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:55.631Z,1516723795.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:55.647Z,1516723795.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:56.027Z,1516723796.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:56.049Z,1516723796.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:56.428Z,1516723796.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:56.443Z,1516723796.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:56.826Z,1516723796.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:56.853Z,1516723796.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:57.230Z,1516723797.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:57.245Z,1516723797.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:57.248Z,1516723797.248 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:57.248Z,1516723797.248 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 257 2018-01-23T16:09:57.248Z,1516723797.248 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:09:57.280Z,1516723797.280 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:09:57.628Z,1516723797.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:57.643Z,1516723797.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:57.655Z,1516723797.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:09:57.655Z,1516723797.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 257 2018-01-23T16:09:58.034Z,1516723798.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:58.056Z,1516723798.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:58.058Z,1516723798.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:09:58.058Z,1516723798.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:09:58.058Z,1516723798.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:09:58.439Z,1516723798.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:58.454Z,1516723798.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:58.840Z,1516723798.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:58.854Z,1516723798.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:59.230Z,1516723799.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:59.244Z,1516723799.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:09:59.628Z,1516723799.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:09:59.644Z,1516723799.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:00.024Z,1516723800.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:00.055Z,1516723800.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:00.437Z,1516723800.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:00.452Z,1516723800.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:00.840Z,1516723800.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:00.855Z,1516723800.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:01.240Z,1516723801.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:01.271Z,1516723801.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:01.641Z,1516723801.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:01.660Z,1516723801.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:02.029Z,1516723802.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:02.055Z,1516723802.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:02.420Z,1516723802.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:02.456Z,1516723802.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:02.820Z,1516723802.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:02.854Z,1516723802.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:02.857Z,1516723802.857 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T16:10:02.857Z,1516723802.857 [Default:CheckIn:C.Wait] Stopped 2018-01-23T16:10:02.857Z,1516723802.857 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T16:10:02.857Z,1516723802.857 [Default:CheckIn:D] Running Loop=1 2018-01-23T16:10:03.221Z,1516723803.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:03.253Z,1516723803.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:03.260Z,1516723803.260 [Default:CheckIn:D] Stopped 2018-01-23T16:10:03.260Z,1516723803.260 [Default:CheckIn:E] Running Loop=1 2018-01-23T16:10:03.627Z,1516723803.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:03.655Z,1516723803.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:03.658Z,1516723803.658 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.186654 min 2018-01-23T16:10:03.658Z,1516723803.658 [Default:CheckIn:E] Stopped 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn] Stopped 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn](INFO): Running loop #76 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn] Running Loop=76 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T16:10:03.659Z,1516723803.659 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T16:10:04.032Z,1516723804.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:04.068Z,1516723804.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:07.136Z,1516723807.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:07.165Z,1516723807.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:07.276Z,1516723807.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:07.303Z,1516723807.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:07.621Z,1516723807.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:07.637Z,1516723807.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:08.026Z,1516723808.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:08.041Z,1516723808.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:08.416Z,1516723808.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:08.435Z,1516723808.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:08.831Z,1516723808.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:08.846Z,1516723808.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:09.235Z,1516723809.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:09.251Z,1516723809.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:09.627Z,1516723809.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:09.642Z,1516723809.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:10.015Z,1516723810.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:10.045Z,1516723810.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:10.424Z,1516723810.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:10.451Z,1516723810.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:10.451Z,1516723810.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 257 2018-01-23T16:10:10.451Z,1516723810.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:10:10.453Z,1516723810.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:10.453Z,1516723810.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 257 2018-01-23T16:10:10.453Z,1516723810.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:10:10.474Z,1516723810.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:10:10.479Z,1516723810.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:10:10.831Z,1516723810.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:10.862Z,1516723810.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:10:10.862Z,1516723810.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 257 2018-01-23T16:10:10.863Z,1516723810.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:10:10.863Z,1516723810.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 257 2018-01-23T16:10:11.242Z,1516723811.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:11.256Z,1516723811.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:10:11.256Z,1516723811.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:10:11.257Z,1516723811.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:10:11.257Z,1516723811.257 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:10:11.257Z,1516723811.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:10:11.258Z,1516723811.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:10:11.621Z,1516723811.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:11.656Z,1516723811.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:10:11.657Z,1516723811.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:12.020Z,1516723812.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:12.050Z,1516723812.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:10:12.055Z,1516723812.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:12.420Z,1516723812.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:12.460Z,1516723812.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:10:12.461Z,1516723812.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:12.832Z,1516723812.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:12.864Z,1516723812.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:10:12.865Z,1516723812.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:13.229Z,1516723813.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:13.260Z,1516723813.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:10:13.261Z,1516723813.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:13.651Z,1516723813.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:13.679Z,1516723813.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:10:13.680Z,1516723813.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:14.017Z,1516723814.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:14.053Z,1516723814.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:10:14.053Z,1516723814.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:14.421Z,1516723814.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:14.436Z,1516723814.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:10:14.437Z,1516723814.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:14.826Z,1516723814.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:14.859Z,1516723814.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:10:14.860Z,1516723814.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:15.228Z,1516723815.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:15.260Z,1516723815.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:10:15.261Z,1516723815.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:15.632Z,1516723815.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:15.659Z,1516723815.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:10:15.660Z,1516723815.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:16.020Z,1516723816.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:16.036Z,1516723816.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:10:16.036Z,1516723816.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:16.415Z,1516723816.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:16.456Z,1516723816.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:10:16.457Z,1516723816.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:16.829Z,1516723816.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:16.845Z,1516723816.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:10:16.846Z,1516723816.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:17.227Z,1516723817.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:17.249Z,1516723817.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:10:17.250Z,1516723817.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:17.629Z,1516723817.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:17.644Z,1516723817.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:10:17.645Z,1516723817.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:18.016Z,1516723818.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:18.041Z,1516723818.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:10:18.042Z,1516723818.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:18.414Z,1516723818.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:18.441Z,1516723818.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:10:18.442Z,1516723818.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:18.829Z,1516723818.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:18.852Z,1516723818.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:10:18.853Z,1516723818.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:19.229Z,1516723819.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:19.252Z,1516723819.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:10:19.253Z,1516723819.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:19.633Z,1516723819.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:19.656Z,1516723819.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:10:19.657Z,1516723819.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:20.026Z,1516723820.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:20.041Z,1516723820.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:10:20.042Z,1516723820.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:20.410Z,1516723820.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:20.445Z,1516723820.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:10:20.446Z,1516723820.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:20.828Z,1516723820.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:20.860Z,1516723820.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:10:20.861Z,1516723820.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:21.239Z,1516723821.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:21.254Z,1516723821.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:10:21.256Z,1516723821.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:21.630Z,1516723821.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:21.645Z,1516723821.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:10:21.646Z,1516723821.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:22.012Z,1516723822.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:22.048Z,1516723822.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:10:22.049Z,1516723822.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:22.414Z,1516723822.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:22.442Z,1516723822.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:10:22.443Z,1516723822.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:22.824Z,1516723822.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:22.849Z,1516723822.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:10:22.850Z,1516723822.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:23.228Z,1516723823.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:23.260Z,1516723823.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:10:23.261Z,1516723823.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:23.630Z,1516723823.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:23.645Z,1516723823.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:10:23.646Z,1516723823.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:24.011Z,1516723824.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:24.037Z,1516723824.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:10:24.038Z,1516723824.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:24.408Z,1516723824.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:24.443Z,1516723824.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:10:24.444Z,1516723824.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:24.824Z,1516723824.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:24.850Z,1516723824.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:10:24.851Z,1516723824.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:25.229Z,1516723825.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:25.251Z,1516723825.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:10:25.252Z,1516723825.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:25.623Z,1516723825.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:25.663Z,1516723825.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:10:25.664Z,1516723825.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:26.009Z,1516723826.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:26.047Z,1516723826.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:10:26.048Z,1516723826.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:26.412Z,1516723826.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:26.452Z,1516723826.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:10:26.453Z,1516723826.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:26.821Z,1516723826.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:26.848Z,1516723826.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:10:26.849Z,1516723826.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:27.233Z,1516723827.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:27.252Z,1516723827.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:10:27.253Z,1516723827.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:27.619Z,1516723827.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:27.649Z,1516723827.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:10:27.650Z,1516723827.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:28.009Z,1516723828.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:28.050Z,1516723828.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:10:28.051Z,1516723828.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:28.408Z,1516723828.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:28.445Z,1516723828.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:10:28.446Z,1516723828.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:28.821Z,1516723828.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:28.852Z,1516723828.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:10:28.853Z,1516723828.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:29.231Z,1516723829.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:29.268Z,1516723829.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:10:29.269Z,1516723829.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:29.622Z,1516723829.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:29.645Z,1516723829.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x6060 got:0x1857 2018-01-23T16:10:29.664Z,1516723829.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:10:29.665Z,1516723829.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:30.013Z,1516723830.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:30.043Z,1516723830.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:10:30.044Z,1516723830.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:30.410Z,1516723830.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:30.444Z,1516723830.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:10:30.445Z,1516723830.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:30.823Z,1516723830.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:30.855Z,1516723830.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:31.236Z,1516723831.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:31.257Z,1516723831.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:31.620Z,1516723831.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:31.691Z,1516723831.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:32.015Z,1516723832.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:32.051Z,1516723832.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:32.412Z,1516723832.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:32.453Z,1516723832.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:32.819Z,1516723832.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:32.856Z,1516723832.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:33.224Z,1516723833.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:33.261Z,1516723833.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:33.622Z,1516723833.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:33.648Z,1516723833.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:34.009Z,1516723834.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:34.056Z,1516723834.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:34.407Z,1516723834.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:34.458Z,1516723834.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:34.824Z,1516723834.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:34.853Z,1516723834.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:35.225Z,1516723835.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:35.257Z,1516723835.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:35.619Z,1516723835.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:35.655Z,1516723835.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:36.017Z,1516723836.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:36.053Z,1516723836.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:36.412Z,1516723836.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:36.451Z,1516723836.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:36.821Z,1516723836.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:36.857Z,1516723836.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:37.223Z,1516723837.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:37.258Z,1516723837.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:37.619Z,1516723837.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:37.654Z,1516723837.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:38.017Z,1516723838.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:38.063Z,1516723838.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:38.414Z,1516723838.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:38.433Z,1516723838.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:38.827Z,1516723838.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:38.860Z,1516723838.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:39.227Z,1516723839.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:39.260Z,1516723839.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:39.619Z,1516723839.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:39.638Z,1516723839.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:40.014Z,1516723840.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:40.037Z,1516723840.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:40.417Z,1516723840.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:40.432Z,1516723840.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:40.816Z,1516723840.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:40.830Z,1516723840.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:41.219Z,1516723841.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:41.237Z,1516723841.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:41.624Z,1516723841.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:41.642Z,1516723841.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:42.023Z,1516723842.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:42.066Z,1516723842.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:42.416Z,1516723842.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:42.430Z,1516723842.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:42.817Z,1516723842.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:42.831Z,1516723842.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:43.216Z,1516723843.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:43.235Z,1516723843.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:43.614Z,1516723843.614 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:43.638Z,1516723843.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:44.019Z,1516723844.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:44.034Z,1516723844.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:44.423Z,1516723844.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:44.440Z,1516723844.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:44.824Z,1516723844.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:44.842Z,1516723844.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:45.221Z,1516723845.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:45.235Z,1516723845.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:45.616Z,1516723845.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:45.631Z,1516723845.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:46.013Z,1516723846.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:46.034Z,1516723846.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:46.418Z,1516723846.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:46.435Z,1516723846.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:46.816Z,1516723846.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:46.831Z,1516723846.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:47.221Z,1516723847.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:47.241Z,1516723847.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:47.623Z,1516723847.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:47.638Z,1516723847.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:48.024Z,1516723848.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:48.043Z,1516723848.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:48.417Z,1516723848.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:48.432Z,1516723848.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:48.817Z,1516723848.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:48.832Z,1516723848.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:49.213Z,1516723849.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:49.235Z,1516723849.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:49.616Z,1516723849.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:49.631Z,1516723849.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:50.023Z,1516723850.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:50.038Z,1516723850.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:50.423Z,1516723850.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:50.438Z,1516723850.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:50.835Z,1516723850.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:50.868Z,1516723850.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:51.222Z,1516723851.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:51.238Z,1516723851.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:51.622Z,1516723851.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:51.637Z,1516723851.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:52.025Z,1516723852.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:52.040Z,1516723852.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:52.420Z,1516723852.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:52.435Z,1516723852.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:52.816Z,1516723852.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:52.849Z,1516723852.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:53.228Z,1516723853.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:53.242Z,1516723853.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:53.629Z,1516723853.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:53.644Z,1516723853.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:54.027Z,1516723854.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:54.049Z,1516723854.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:54.418Z,1516723854.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:54.433Z,1516723854.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:54.820Z,1516723854.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:54.841Z,1516723854.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:55.217Z,1516723855.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:55.238Z,1516723855.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:55.612Z,1516723855.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:55.650Z,1516723855.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:56.035Z,1516723856.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:56.055Z,1516723856.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:56.431Z,1516723856.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:56.446Z,1516723856.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:56.825Z,1516723856.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:56.852Z,1516723856.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:57.212Z,1516723857.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:57.241Z,1516723857.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:57.612Z,1516723857.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:57.639Z,1516723857.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:58.008Z,1516723858.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:58.042Z,1516723858.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:58.409Z,1516723858.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:58.451Z,1516723858.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:58.806Z,1516723858.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:58.833Z,1516723858.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:59.227Z,1516723859.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:59.242Z,1516723859.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:10:59.631Z,1516723859.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:10:59.647Z,1516723859.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:00.023Z,1516723860.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:00.045Z,1516723860.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:00.408Z,1516723860.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:00.441Z,1516723860.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:00.808Z,1516723860.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:00.846Z,1516723860.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:01.213Z,1516723861.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:01.239Z,1516723861.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:01.612Z,1516723861.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:01.648Z,1516723861.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:02.018Z,1516723862.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:02.049Z,1516723862.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:02.435Z,1516723862.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:02.450Z,1516723862.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:02.827Z,1516723862.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:02.842Z,1516723862.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:03.208Z,1516723863.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:03.246Z,1516723863.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:03.608Z,1516723863.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:03.641Z,1516723863.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:04.009Z,1516723864.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:04.041Z,1516723864.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:04.409Z,1516723864.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:04.446Z,1516723864.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:07.527Z,1516723867.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:07.542Z,1516723867.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:07.660Z,1516723867.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:07.704Z,1516723867.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:08.003Z,1516723868.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:08.018Z,1516723868.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:08.411Z,1516723868.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:08.444Z,1516723868.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:08.793Z,1516723868.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:08.809Z,1516723868.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:09.194Z,1516723869.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:09.209Z,1516723869.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:09.592Z,1516723869.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:09.609Z,1516723869.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:09.996Z,1516723869.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:10.011Z,1516723870.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:10.399Z,1516723870.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:10.414Z,1516723870.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:10.795Z,1516723870.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:10.816Z,1516723870.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:11.193Z,1516723871.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:11.209Z,1516723871.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:11.590Z,1516723871.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:11.613Z,1516723871.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:11.997Z,1516723871.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:12.011Z,1516723872.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:12.398Z,1516723872.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:12.413Z,1516723872.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:12.792Z,1516723872.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:12.807Z,1516723872.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:13.198Z,1516723873.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:13.220Z,1516723873.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:13.599Z,1516723873.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:13.614Z,1516723873.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:13.997Z,1516723873.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:14.017Z,1516723874.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:14.393Z,1516723874.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:14.408Z,1516723874.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:14.792Z,1516723874.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:14.807Z,1516723874.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:15.188Z,1516723875.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:15.221Z,1516723875.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:15.597Z,1516723875.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:15.612Z,1516723875.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:16.002Z,1516723876.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:16.017Z,1516723876.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:16.401Z,1516723876.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:16.421Z,1516723876.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:16.802Z,1516723876.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:16.817Z,1516723876.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:17.193Z,1516723877.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:17.213Z,1516723877.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:17.596Z,1516723877.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:17.617Z,1516723877.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:17.997Z,1516723877.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:18.012Z,1516723878.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:18.397Z,1516723878.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:18.413Z,1516723878.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:18.786Z,1516723878.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:18.818Z,1516723878.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:19.203Z,1516723879.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:19.218Z,1516723879.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:19.604Z,1516723879.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:19.618Z,1516723879.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:20.002Z,1516723880.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:20.021Z,1516723880.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:20.397Z,1516723880.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:20.412Z,1516723880.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:20.793Z,1516723880.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:20.813Z,1516723880.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:21.192Z,1516723881.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:21.211Z,1516723881.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:21.593Z,1516723881.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:21.612Z,1516723881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:22.002Z,1516723882.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:22.025Z,1516723882.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:22.403Z,1516723882.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:22.418Z,1516723882.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:22.804Z,1516723882.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:22.864Z,1516723882.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:23.200Z,1516723883.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:23.223Z,1516723883.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:23.590Z,1516723883.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:23.641Z,1516723883.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:23.995Z,1516723883.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:24.042Z,1516723884.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:24.413Z,1516723884.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:24.449Z,1516723884.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:24.799Z,1516723884.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:24.814Z,1516723884.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:25.209Z,1516723885.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:25.257Z,1516723885.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:25.608Z,1516723885.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:25.629Z,1516723885.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:26.054Z,1516723886.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:26.069Z,1516723886.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:26.384Z,1516723886.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:26.416Z,1516723886.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:26.785Z,1516723886.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:26.817Z,1516723886.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:27.185Z,1516723887.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:27.221Z,1516723887.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:27.586Z,1516723887.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:27.658Z,1516723887.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:28.018Z,1516723888.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:28.038Z,1516723888.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:28.422Z,1516723888.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:28.446Z,1516723888.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:28.801Z,1516723888.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:28.847Z,1516723888.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:29.190Z,1516723889.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:29.210Z,1516723889.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:29.609Z,1516723889.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:29.661Z,1516723889.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:30.001Z,1516723890.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:30.063Z,1516723890.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:30.398Z,1516723890.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:30.453Z,1516723890.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:30.801Z,1516723890.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:30.825Z,1516723890.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:31.209Z,1516723891.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:31.236Z,1516723891.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:31.612Z,1516723891.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:31.633Z,1516723891.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:32.012Z,1516723892.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:32.035Z,1516723892.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:32.390Z,1516723892.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:32.464Z,1516723892.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:32.786Z,1516723892.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:32.825Z,1516723892.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:33.219Z,1516723893.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:33.271Z,1516723893.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:33.590Z,1516723893.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:33.642Z,1516723893.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:34.001Z,1516723894.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:34.033Z,1516723894.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:34.420Z,1516723894.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:34.445Z,1516723894.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:34.824Z,1516723894.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:34.886Z,1516723894.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:35.192Z,1516723895.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:35.232Z,1516723895.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:35.599Z,1516723895.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:35.648Z,1516723895.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:35.995Z,1516723895.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:36.046Z,1516723896.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:36.394Z,1516723896.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:36.418Z,1516723896.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:36.807Z,1516723896.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:36.855Z,1516723896.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:37.204Z,1516723897.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:37.248Z,1516723897.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:37.604Z,1516723897.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:37.623Z,1516723897.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:38.025Z,1516723898.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:38.067Z,1516723898.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:38.395Z,1516723898.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:38.446Z,1516723898.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:38.794Z,1516723898.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:38.818Z,1516723898.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:39.212Z,1516723899.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:39.251Z,1516723899.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:39.598Z,1516723899.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:39.664Z,1516723899.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:40.006Z,1516723900.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:40.070Z,1516723900.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:40.413Z,1516723900.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:40.437Z,1516723900.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:40.807Z,1516723900.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:40.822Z,1516723900.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:41.182Z,1516723901.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:41.205Z,1516723901.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:41.584Z,1516723901.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:41.616Z,1516723901.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:41.984Z,1516723901.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:42.018Z,1516723902.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:42.385Z,1516723902.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:42.420Z,1516723902.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:42.784Z,1516723902.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:42.817Z,1516723902.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:43.195Z,1516723903.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:43.239Z,1516723903.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:43.608Z,1516723903.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:43.623Z,1516723903.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:44.004Z,1516723904.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:44.031Z,1516723904.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:44.384Z,1516723904.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:44.418Z,1516723904.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:44.782Z,1516723904.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:44.805Z,1516723904.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:45.185Z,1516723905.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:45.216Z,1516723905.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:45.583Z,1516723905.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:45.598Z,1516723905.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:45.995Z,1516723905.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:46.031Z,1516723906.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:46.407Z,1516723906.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:46.437Z,1516723906.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:46.798Z,1516723906.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:46.836Z,1516723906.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:47.183Z,1516723907.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:47.250Z,1516723907.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:47.590Z,1516723907.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:47.609Z,1516723907.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:47.992Z,1516723907.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:48.006Z,1516723908.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:48.392Z,1516723908.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:48.411Z,1516723908.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:48.792Z,1516723908.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:48.807Z,1516723908.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:49.202Z,1516723909.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:49.217Z,1516723909.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:49.602Z,1516723909.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:49.621Z,1516723909.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:50.004Z,1516723910.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:50.060Z,1516723910.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:50.393Z,1516723910.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:50.408Z,1516723910.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:50.788Z,1516723910.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:50.808Z,1516723910.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:51.197Z,1516723911.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:51.217Z,1516723911.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:51.593Z,1516723911.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:51.607Z,1516723911.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:52.002Z,1516723912.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:52.017Z,1516723912.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:52.401Z,1516723912.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:52.421Z,1516723912.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:52.804Z,1516723912.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:52.917Z,1516723912.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:53.190Z,1516723913.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:53.205Z,1516723913.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:53.588Z,1516723913.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:53.610Z,1516723913.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:53.997Z,1516723913.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:54.012Z,1516723914.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:54.397Z,1516723914.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:54.412Z,1516723914.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:54.788Z,1516723914.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:54.810Z,1516723914.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:55.204Z,1516723915.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:55.219Z,1516723915.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:55.606Z,1516723915.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:55.621Z,1516723915.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:56.002Z,1516723916.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:56.017Z,1516723916.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:56.394Z,1516723916.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:56.409Z,1516723916.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:56.788Z,1516723916.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:56.810Z,1516723916.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:57.189Z,1516723917.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:57.211Z,1516723917.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:57.594Z,1516723917.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:57.612Z,1516723917.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:58.003Z,1516723918.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:58.018Z,1516723918.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:58.404Z,1516723918.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:58.431Z,1516723918.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:58.801Z,1516723918.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:58.827Z,1516723918.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:59.185Z,1516723919.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:59.212Z,1516723919.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:11:59.584Z,1516723919.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:11:59.616Z,1516723919.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:00.004Z,1516723920.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:00.018Z,1516723920.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:00.402Z,1516723920.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:00.417Z,1516723920.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:00.800Z,1516723920.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:00.827Z,1516723920.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:01.185Z,1516723921.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:01.220Z,1516723921.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:01.588Z,1516723921.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:01.615Z,1516723921.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:02.011Z,1516723922.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:02.038Z,1516723922.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:02.403Z,1516723922.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:02.424Z,1516723922.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:02.798Z,1516723922.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:02.813Z,1516723922.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:03.198Z,1516723923.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:03.213Z,1516723923.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:03.594Z,1516723923.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:03.609Z,1516723923.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:03.998Z,1516723923.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:04.021Z,1516723924.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:04.399Z,1516723924.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:04.414Z,1516723924.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:04.801Z,1516723924.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:04.816Z,1516723924.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:07.891Z,1516723927.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:07.906Z,1516723927.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:08.013Z,1516723928.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:08.049Z,1516723928.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:08.373Z,1516723928.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:08.398Z,1516723928.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:08.777Z,1516723928.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:08.804Z,1516723928.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:09.164Z,1516723929.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:09.199Z,1516723929.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:09.561Z,1516723929.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:09.578Z,1516723929.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:09.957Z,1516723929.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:09.972Z,1516723929.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:10.358Z,1516723930.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:10.373Z,1516723930.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:10.754Z,1516723930.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:10.777Z,1516723930.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:11.163Z,1516723931.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:11.178Z,1516723931.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:11.567Z,1516723931.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:11.582Z,1516723931.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:11.962Z,1516723931.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:11.977Z,1516723931.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:12.358Z,1516723932.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:12.373Z,1516723932.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:12.756Z,1516723932.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:12.771Z,1516723932.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:13.152Z,1516723933.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:13.181Z,1516723933.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:13.558Z,1516723933.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:13.573Z,1516723933.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:13.957Z,1516723933.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:13.977Z,1516723933.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:14.362Z,1516723934.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:14.381Z,1516723934.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:14.763Z,1516723934.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:14.778Z,1516723934.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:15.162Z,1516723935.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:15.181Z,1516723935.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:15.556Z,1516723935.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:15.577Z,1516723935.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:15.957Z,1516723935.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:15.972Z,1516723935.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:16.353Z,1516723936.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:16.375Z,1516723936.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:16.756Z,1516723936.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:16.771Z,1516723936.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:17.162Z,1516723937.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:17.184Z,1516723937.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:17.564Z,1516723937.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:17.579Z,1516723937.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:17.962Z,1516723937.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:17.981Z,1516723937.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:18.357Z,1516723938.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:18.372Z,1516723938.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:18.757Z,1516723938.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:18.777Z,1516723938.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:19.156Z,1516723939.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:19.177Z,1516723939.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:19.558Z,1516723939.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:19.580Z,1516723939.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:19.954Z,1516723939.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:19.969Z,1516723939.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:20.362Z,1516723940.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:20.381Z,1516723940.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:20.763Z,1516723940.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:20.778Z,1516723940.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:21.160Z,1516723941.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:21.183Z,1516723941.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:21.557Z,1516723941.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:21.572Z,1516723941.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:21.956Z,1516723941.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:21.977Z,1516723941.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:22.353Z,1516723942.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:22.376Z,1516723942.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:22.754Z,1516723942.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:22.781Z,1516723942.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:23.167Z,1516723943.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:23.182Z,1516723943.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:23.571Z,1516723943.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:23.586Z,1516723943.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:23.967Z,1516723943.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:23.981Z,1516723943.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:24.355Z,1516723944.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:24.381Z,1516723944.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:24.746Z,1516723944.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:24.777Z,1516723944.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:25.160Z,1516723945.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:25.179Z,1516723945.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:25.549Z,1516723945.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:25.582Z,1516723945.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:25.949Z,1516723945.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:25.985Z,1516723945.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:26.371Z,1516723946.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:26.386Z,1516723946.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:26.769Z,1516723946.769 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:26.806Z,1516723946.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:27.159Z,1516723947.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:27.193Z,1516723947.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:27.548Z,1516723947.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:27.585Z,1516723947.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:27.948Z,1516723947.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:27.963Z,1516723947.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:28.353Z,1516723948.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:28.369Z,1516723948.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:28.760Z,1516723948.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:28.797Z,1516723948.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:29.171Z,1516723949.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:29.203Z,1516723949.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:29.572Z,1516723949.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:29.602Z,1516723949.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:29.964Z,1516723949.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:29.978Z,1516723949.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:30.357Z,1516723950.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:30.372Z,1516723950.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:30.752Z,1516723950.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:30.779Z,1516723950.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:31.156Z,1516723951.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:31.177Z,1516723951.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:31.558Z,1516723951.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:31.573Z,1516723951.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:31.956Z,1516723951.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:31.977Z,1516723951.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:32.362Z,1516723952.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:32.385Z,1516723952.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:32.771Z,1516723952.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:32.792Z,1516723952.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:33.167Z,1516723953.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:33.182Z,1516723953.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:33.552Z,1516723953.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:33.575Z,1516723953.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:33.957Z,1516723953.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:33.976Z,1516723953.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:34.361Z,1516723954.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:34.377Z,1516723954.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:34.752Z,1516723954.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:34.783Z,1516723954.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:35.168Z,1516723955.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:35.182Z,1516723955.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:35.571Z,1516723955.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:35.586Z,1516723955.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:35.964Z,1516723955.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:35.991Z,1516723955.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:36.352Z,1516723956.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:36.380Z,1516723956.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:36.746Z,1516723956.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:36.774Z,1516723956.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:37.148Z,1516723957.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:37.181Z,1516723957.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:37.549Z,1516723957.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:37.586Z,1516723957.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:37.946Z,1516723957.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:37.969Z,1516723957.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:38.376Z,1516723958.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:38.391Z,1516723958.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:38.771Z,1516723958.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:38.797Z,1516723958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:39.159Z,1516723959.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:39.193Z,1516723959.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:39.549Z,1516723959.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:39.580Z,1516723959.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:39.950Z,1516723959.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:39.965Z,1516723959.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:40.350Z,1516723960.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:40.365Z,1516723960.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:40.757Z,1516723960.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:40.772Z,1516723960.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:41.168Z,1516723961.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:41.202Z,1516723961.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:41.568Z,1516723961.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:41.599Z,1516723961.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:41.972Z,1516723961.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:41.997Z,1516723961.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:42.361Z,1516723962.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:42.376Z,1516723962.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:42.750Z,1516723962.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:42.781Z,1516723962.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:43.157Z,1516723963.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:43.172Z,1516723963.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:43.559Z,1516723963.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:43.573Z,1516723963.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:43.953Z,1516723963.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:43.974Z,1516723963.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:44.363Z,1516723964.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:44.378Z,1516723964.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:44.763Z,1516723964.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:44.778Z,1516723964.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:45.164Z,1516723965.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:45.185Z,1516723965.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:45.556Z,1516723965.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:45.576Z,1516723965.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:45.958Z,1516723965.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:45.974Z,1516723965.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:46.356Z,1516723966.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:46.378Z,1516723966.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:46.752Z,1516723966.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:46.776Z,1516723966.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:47.166Z,1516723967.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:47.189Z,1516723967.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:47.568Z,1516723967.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:47.584Z,1516723967.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:47.967Z,1516723967.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:47.983Z,1516723967.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:48.357Z,1516723968.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:48.372Z,1516723968.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:48.752Z,1516723968.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:48.773Z,1516723968.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:49.152Z,1516723969.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:49.170Z,1516723969.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:49.566Z,1516723969.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:49.581Z,1516723969.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:49.961Z,1516723969.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:49.976Z,1516723969.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:50.366Z,1516723970.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:50.382Z,1516723970.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:50.771Z,1516723970.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:50.793Z,1516723970.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:51.167Z,1516723971.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:51.182Z,1516723971.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:51.552Z,1516723971.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:51.574Z,1516723971.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:51.959Z,1516723971.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:51.981Z,1516723971.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:52.362Z,1516723972.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:52.377Z,1516723972.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:52.751Z,1516723972.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:52.783Z,1516723972.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:53.171Z,1516723973.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:53.186Z,1516723973.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:53.569Z,1516723973.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:53.589Z,1516723973.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:53.967Z,1516723973.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:53.981Z,1516723973.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:54.358Z,1516723974.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:54.380Z,1516723974.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:54.746Z,1516723974.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:54.777Z,1516723974.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:55.160Z,1516723975.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:55.178Z,1516723975.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:55.549Z,1516723975.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:55.577Z,1516723975.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:55.946Z,1516723975.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:55.977Z,1516723975.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:56.367Z,1516723976.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:56.382Z,1516723976.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:56.771Z,1516723976.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:56.793Z,1516723976.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:57.164Z,1516723977.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:57.185Z,1516723977.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:57.548Z,1516723977.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:57.574Z,1516723977.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:57.947Z,1516723977.947 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:57.983Z,1516723977.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:58.353Z,1516723978.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:58.380Z,1516723978.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:58.382Z,1516723978.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:58.382Z,1516723978.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 258 2018-01-23T16:12:58.382Z,1516723978.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:12:58.394Z,1516723978.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:12:58.748Z,1516723978.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:58.781Z,1516723978.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:58.793Z,1516723978.793 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:12:58.793Z,1516723978.793 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 258 2018-01-23T16:12:59.165Z,1516723979.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:59.185Z,1516723979.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:59.187Z,1516723979.187 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:12:59.187Z,1516723979.187 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:12:59.188Z,1516723979.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:12:59.577Z,1516723979.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:59.593Z,1516723979.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:12:59.971Z,1516723979.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:12:59.986Z,1516723979.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:00.348Z,1516723980.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:00.377Z,1516723980.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:00.746Z,1516723980.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:00.769Z,1516723980.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:01.148Z,1516723981.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:01.181Z,1516723981.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:01.553Z,1516723981.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:01.586Z,1516723981.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:01.946Z,1516723981.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:01.961Z,1516723981.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:02.360Z,1516723982.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:02.386Z,1516723982.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:02.763Z,1516723982.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:02.799Z,1516723982.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:03.159Z,1516723983.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:03.185Z,1516723983.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:03.548Z,1516723983.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:03.589Z,1516723983.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:03.952Z,1516723983.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:03.967Z,1516723983.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:04.357Z,1516723984.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:04.389Z,1516723984.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:04.756Z,1516723984.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:04.797Z,1516723984.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:05.167Z,1516723985.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:05.201Z,1516723985.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:08.272Z,1516723988.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:08.298Z,1516723988.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:08.411Z,1516723988.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:08.445Z,1516723988.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:08.747Z,1516723988.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:08.762Z,1516723988.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:09.157Z,1516723989.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:09.171Z,1516723989.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:09.552Z,1516723989.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:09.573Z,1516723989.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:09.948Z,1516723989.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:09.963Z,1516723989.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:10.354Z,1516723990.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:10.376Z,1516723990.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:10.760Z,1516723990.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:10.774Z,1516723990.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:11.152Z,1516723991.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:11.169Z,1516723991.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:11.549Z,1516723991.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:11.564Z,1516723991.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:11.564Z,1516723991.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 258 2018-01-23T16:13:11.564Z,1516723991.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:13:11.566Z,1516723991.566 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:11.566Z,1516723991.566 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 258 2018-01-23T16:13:11.566Z,1516723991.566 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:13:11.579Z,1516723991.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:13:11.579Z,1516723991.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:13:11.944Z,1516723991.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:11.990Z,1516723991.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:13:11.990Z,1516723991.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 258 2018-01-23T16:13:11.995Z,1516723991.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:13:11.995Z,1516723991.995 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 258 2018-01-23T16:13:12.348Z,1516723992.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:12.367Z,1516723992.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:13:12.367Z,1516723992.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:13:12.368Z,1516723992.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:13:12.368Z,1516723992.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:13:12.368Z,1516723992.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:13:12.369Z,1516723992.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:13:12.750Z,1516723992.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:12.772Z,1516723992.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:13:12.773Z,1516723992.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:13.159Z,1516723993.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:13.173Z,1516723993.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:13:13.174Z,1516723993.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:13.562Z,1516723993.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:13.580Z,1516723993.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:13:13.581Z,1516723993.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:13.960Z,1516723993.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:13.974Z,1516723993.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:13:13.975Z,1516723993.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:14.338Z,1516723994.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:14.369Z,1516723994.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:13:14.370Z,1516723994.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:14.740Z,1516723994.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:14.776Z,1516723994.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:13:14.777Z,1516723994.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:15.140Z,1516723995.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:15.167Z,1516723995.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:13:15.168Z,1516723995.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:15.541Z,1516723995.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:15.573Z,1516723995.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:13:15.573Z,1516723995.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:15.940Z,1516723995.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:15.966Z,1516723995.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:13:15.967Z,1516723995.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:16.358Z,1516723996.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:16.384Z,1516723996.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:13:16.385Z,1516723996.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:16.757Z,1516723996.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:16.784Z,1516723996.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:13:16.785Z,1516723996.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:17.164Z,1516723997.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:17.178Z,1516723997.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:13:17.179Z,1516723997.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:17.541Z,1516723997.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:17.574Z,1516723997.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:13:17.575Z,1516723997.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:17.945Z,1516723997.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:17.971Z,1516723997.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:13:17.972Z,1516723997.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:18.342Z,1516723998.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:18.372Z,1516723998.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:13:18.373Z,1516723998.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:18.743Z,1516723998.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:18.781Z,1516723998.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:13:18.782Z,1516723998.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:19.152Z,1516723999.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:19.179Z,1516723999.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:13:19.180Z,1516723999.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:19.556Z,1516723999.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:19.582Z,1516723999.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:13:19.583Z,1516723999.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:19.951Z,1516723999.951 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:19.986Z,1516723999.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:13:19.987Z,1516723999.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:20.340Z,1516724000.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:20.357Z,1516724000.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:13:20.358Z,1516724000.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:20.752Z,1516724000.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:20.784Z,1516724000.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:13:20.785Z,1516724000.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:21.146Z,1516724001.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:21.160Z,1516724001.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:13:21.161Z,1516724001.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:21.549Z,1516724001.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:21.565Z,1516724001.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:13:21.566Z,1516724001.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:21.952Z,1516724001.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:21.973Z,1516724001.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:13:21.974Z,1516724001.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:22.353Z,1516724002.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:22.373Z,1516724002.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:13:22.373Z,1516724002.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:22.755Z,1516724002.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:22.770Z,1516724002.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:13:22.771Z,1516724002.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:23.155Z,1516724003.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:23.169Z,1516724003.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:13:23.170Z,1516724003.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:23.550Z,1516724003.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:23.564Z,1516724003.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:13:23.565Z,1516724003.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:23.945Z,1516724003.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:23.976Z,1516724003.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:13:23.977Z,1516724003.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:24.349Z,1516724004.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:24.369Z,1516724004.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:13:24.369Z,1516724004.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:24.750Z,1516724004.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:24.765Z,1516724004.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:13:24.766Z,1516724004.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:25.156Z,1516724005.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:25.184Z,1516724005.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:13:25.185Z,1516724005.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:25.567Z,1516724005.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:25.581Z,1516724005.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:13:25.582Z,1516724005.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:25.959Z,1516724005.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:25.984Z,1516724005.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:13:25.985Z,1516724005.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:26.341Z,1516724006.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:26.379Z,1516724006.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:13:26.380Z,1516724006.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:26.740Z,1516724006.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:26.766Z,1516724006.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:13:26.768Z,1516724006.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:27.153Z,1516724007.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:27.169Z,1516724007.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:13:27.169Z,1516724007.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:27.541Z,1516724007.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:27.568Z,1516724007.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:13:27.569Z,1516724007.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:27.940Z,1516724007.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:27.973Z,1516724007.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:13:27.974Z,1516724007.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:28.364Z,1516724008.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:28.379Z,1516724008.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:13:28.380Z,1516724008.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:28.763Z,1516724008.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:28.777Z,1516724008.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:13:28.778Z,1516724008.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:29.159Z,1516724009.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:29.174Z,1516724009.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:13:29.175Z,1516724009.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:29.540Z,1516724009.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:29.572Z,1516724009.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:13:29.573Z,1516724009.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:29.940Z,1516724009.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:29.975Z,1516724009.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:13:29.976Z,1516724009.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:30.357Z,1516724010.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:30.372Z,1516724010.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:13:30.373Z,1516724010.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:30.740Z,1516724010.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:30.777Z,1516724010.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:13:30.778Z,1516724010.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:31.156Z,1516724011.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:31.183Z,1516724011.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:13:31.184Z,1516724011.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:31.563Z,1516724011.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:31.578Z,1516724011.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:31.962Z,1516724011.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:31.990Z,1516724011.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:32.345Z,1516724012.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:32.377Z,1516724012.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:32.740Z,1516724012.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:32.773Z,1516724012.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:33.140Z,1516724013.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:33.176Z,1516724013.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:33.557Z,1516724013.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:33.572Z,1516724013.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:33.960Z,1516724013.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:33.975Z,1516724013.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:34.358Z,1516724014.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:34.381Z,1516724014.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:34.757Z,1516724014.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:34.784Z,1516724014.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:35.167Z,1516724015.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:35.182Z,1516724015.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:35.544Z,1516724015.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:35.573Z,1516724015.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:35.940Z,1516724015.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:35.972Z,1516724015.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:36.341Z,1516724016.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:36.376Z,1516724016.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:36.743Z,1516724016.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:36.778Z,1516724016.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:37.164Z,1516724017.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:37.178Z,1516724017.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:37.567Z,1516724017.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:37.582Z,1516724017.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:37.950Z,1516724017.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:37.976Z,1516724017.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:38.348Z,1516724018.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:38.374Z,1516724018.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:38.761Z,1516724018.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:38.776Z,1516724018.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:39.162Z,1516724019.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:39.189Z,1516724019.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:39.561Z,1516724019.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:39.586Z,1516724019.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:39.956Z,1516724019.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:39.978Z,1516724019.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:40.343Z,1516724020.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:40.378Z,1516724020.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:40.742Z,1516724020.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:40.765Z,1516724020.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:41.151Z,1516724021.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:41.177Z,1516724021.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:41.564Z,1516724021.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:41.579Z,1516724021.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:41.963Z,1516724021.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:41.978Z,1516724021.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:42.353Z,1516724022.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:42.379Z,1516724022.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:42.739Z,1516724022.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:42.778Z,1516724022.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:43.153Z,1516724023.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:43.185Z,1516724023.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:43.564Z,1516724023.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:43.578Z,1516724023.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:43.954Z,1516724023.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:43.988Z,1516724023.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:44.349Z,1516724024.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:44.375Z,1516724024.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:44.742Z,1516724024.742 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:44.777Z,1516724024.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:45.169Z,1516724025.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:45.183Z,1516724025.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:45.571Z,1516724025.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:45.586Z,1516724025.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:45.971Z,1516724025.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:45.986Z,1516724025.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:46.342Z,1516724026.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:46.382Z,1516724026.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:46.740Z,1516724026.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:46.755Z,1516724026.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:47.155Z,1516724027.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:47.181Z,1516724027.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:47.576Z,1516724027.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:47.591Z,1516724027.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:47.954Z,1516724027.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:47.985Z,1516724027.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:48.352Z,1516724028.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:48.383Z,1516724028.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:48.749Z,1516724028.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:48.769Z,1516724028.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:49.155Z,1516724029.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:49.191Z,1516724029.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:49.564Z,1516724029.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:49.593Z,1516724029.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:49.967Z,1516724029.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:49.995Z,1516724029.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:50.351Z,1516724030.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:50.366Z,1516724030.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:50.749Z,1516724030.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:50.764Z,1516724030.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:51.157Z,1516724031.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:51.173Z,1516724031.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:51.557Z,1516724031.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:51.577Z,1516724031.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:51.960Z,1516724031.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:51.974Z,1516724031.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:52.348Z,1516724032.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:52.363Z,1516724032.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:52.740Z,1516724032.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:52.781Z,1516724032.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:53.166Z,1516724033.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:53.173Z,1516724033.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x53139 got:0x49716 2018-01-23T16:13:53.208Z,1516724033.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:53.560Z,1516724033.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:53.587Z,1516724033.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:53.963Z,1516724033.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:53.978Z,1516724033.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:54.341Z,1516724034.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:54.376Z,1516724034.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:54.741Z,1516724034.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:54.774Z,1516724034.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:55.164Z,1516724035.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:55.179Z,1516724035.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:55.562Z,1516724035.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:55.585Z,1516724035.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:55.960Z,1516724035.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:55.983Z,1516724035.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:56.341Z,1516724036.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:56.379Z,1516724036.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:56.747Z,1516724036.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:56.775Z,1516724036.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:57.176Z,1516724037.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:57.197Z,1516724037.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:57.568Z,1516724037.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:57.583Z,1516724037.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:57.953Z,1516724037.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:57.994Z,1516724037.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:58.348Z,1516724038.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:58.377Z,1516724038.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:58.743Z,1516724038.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:58.770Z,1516724038.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:59.152Z,1516724039.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:59.188Z,1516724039.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:59.557Z,1516724039.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:59.589Z,1516724039.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:13:59.961Z,1516724039.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:13:59.986Z,1516724039.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:00.356Z,1516724040.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:00.379Z,1516724040.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:00.746Z,1516724040.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:00.796Z,1516724040.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:01.166Z,1516724041.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:01.197Z,1516724041.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:01.564Z,1516724041.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:01.590Z,1516724041.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:01.963Z,1516724041.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:01.993Z,1516724041.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:02.355Z,1516724042.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:02.393Z,1516724042.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:02.753Z,1516724042.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:02.792Z,1516724042.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:03.158Z,1516724043.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:03.173Z,1516724043.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:03.558Z,1516724043.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:03.573Z,1516724043.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:03.954Z,1516724043.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:03.997Z,1516724043.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:04.351Z,1516724044.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:04.371Z,1516724044.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:04.750Z,1516724044.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:04.768Z,1516724044.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:05.156Z,1516724045.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:05.173Z,1516724045.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:05.556Z,1516724045.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:05.597Z,1516724045.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:08.652Z,1516724048.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:08.667Z,1516724048.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:08.774Z,1516724048.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:08.811Z,1516724048.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:09.119Z,1516724049.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:09.157Z,1516724049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:09.521Z,1516724049.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:09.563Z,1516724049.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:09.916Z,1516724049.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:09.954Z,1516724049.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:10.327Z,1516724050.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:10.358Z,1516724050.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:10.731Z,1516724050.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:10.764Z,1516724050.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:11.120Z,1516724051.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:11.134Z,1516724051.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:11.515Z,1516724051.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:11.534Z,1516724051.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:11.921Z,1516724051.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:11.936Z,1516724051.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:12.312Z,1516724052.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:12.333Z,1516724052.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:12.713Z,1516724052.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:12.740Z,1516724052.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:13.117Z,1516724053.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:13.132Z,1516724053.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:13.524Z,1516724053.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:13.547Z,1516724053.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:13.930Z,1516724053.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:13.945Z,1516724053.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:14.327Z,1516724054.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:14.342Z,1516724054.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:14.709Z,1516724054.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:14.741Z,1516724054.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:15.109Z,1516724055.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:15.140Z,1516724055.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:15.509Z,1516724055.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:15.545Z,1516724055.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:15.909Z,1516724055.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:15.935Z,1516724055.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:16.324Z,1516724056.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:16.351Z,1516724056.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:16.732Z,1516724056.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:16.746Z,1516724056.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:17.123Z,1516724057.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:17.145Z,1516724057.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:17.508Z,1516724057.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:17.540Z,1516724057.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:17.908Z,1516724057.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:17.945Z,1516724057.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:18.306Z,1516724058.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:18.330Z,1516724058.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:18.713Z,1516724058.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:18.745Z,1516724058.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:19.108Z,1516724059.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:19.146Z,1516724059.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:19.531Z,1516724059.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:19.546Z,1516724059.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:19.931Z,1516724059.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:19.947Z,1516724059.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:20.319Z,1516724060.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:20.349Z,1516724060.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:20.709Z,1516724060.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:20.744Z,1516724060.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:21.108Z,1516724061.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:21.144Z,1516724061.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:21.510Z,1516724061.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:21.546Z,1516724061.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:21.909Z,1516724061.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:21.944Z,1516724061.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:22.319Z,1516724062.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:22.353Z,1516724062.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:22.722Z,1516724062.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:22.752Z,1516724062.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:23.119Z,1516724063.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:23.153Z,1516724063.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:23.513Z,1516724063.513 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:23.544Z,1516724063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:23.909Z,1516724063.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:23.953Z,1516724063.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:24.306Z,1516724064.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:24.321Z,1516724064.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:24.710Z,1516724064.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:24.724Z,1516724064.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:25.109Z,1516724065.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:25.129Z,1516724065.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:25.528Z,1516724065.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:25.553Z,1516724065.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:25.943Z,1516724065.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:25.958Z,1516724065.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:26.332Z,1516724066.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:26.365Z,1516724066.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:26.717Z,1516724066.717 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:26.761Z,1516724066.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:27.117Z,1516724067.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:27.132Z,1516724067.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:27.521Z,1516724067.521 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:27.557Z,1516724067.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:27.918Z,1516724067.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:27.933Z,1516724067.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:28.323Z,1516724068.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:28.338Z,1516724068.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:28.723Z,1516724068.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:28.738Z,1516724068.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:29.120Z,1516724069.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:29.141Z,1516724069.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:29.515Z,1516724069.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:29.537Z,1516724069.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:29.918Z,1516724069.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:29.933Z,1516724069.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:30.312Z,1516724070.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:30.332Z,1516724070.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:30.713Z,1516724070.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:30.736Z,1516724070.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:31.112Z,1516724071.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:31.141Z,1516724071.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:31.524Z,1516724071.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:31.557Z,1516724071.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:31.935Z,1516724071.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:31.957Z,1516724071.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:32.327Z,1516724072.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:32.348Z,1516724072.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:32.709Z,1516724072.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:32.745Z,1516724072.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:33.129Z,1516724073.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:33.144Z,1516724073.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:33.157Z,1516724073.157 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:14:33.518Z,1516724073.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:33.545Z,1516724073.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:33.909Z,1516724073.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:33.945Z,1516724073.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:34.324Z,1516724074.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:34.346Z,1516724074.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:34.728Z,1516724074.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:34.759Z,1516724074.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:35.120Z,1516724075.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:35.153Z,1516724075.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:35.508Z,1516724075.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:35.525Z,1516724075.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:35.909Z,1516724075.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:35.929Z,1516724075.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:36.317Z,1516724076.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:36.333Z,1516724076.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:36.721Z,1516724076.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:36.737Z,1516724076.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:37.116Z,1516724077.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:37.136Z,1516724077.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:37.520Z,1516724077.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:37.541Z,1516724077.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:37.931Z,1516724077.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:37.963Z,1516724077.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:38.324Z,1516724078.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:38.340Z,1516724078.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:38.713Z,1516724078.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:38.745Z,1516724078.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:39.116Z,1516724079.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:39.144Z,1516724079.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:39.517Z,1516724079.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:39.540Z,1516724079.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:39.916Z,1516724079.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:39.932Z,1516724079.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:40.324Z,1516724080.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:40.353Z,1516724080.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:40.732Z,1516724080.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:40.749Z,1516724080.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:41.127Z,1516724081.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:41.144Z,1516724081.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:41.509Z,1516724081.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:41.541Z,1516724081.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:41.909Z,1516724081.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:41.945Z,1516724081.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:42.319Z,1516724082.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:42.338Z,1516724082.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:42.709Z,1516724082.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:42.736Z,1516724082.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:43.109Z,1516724083.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:43.137Z,1516724083.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:43.527Z,1516724083.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:43.542Z,1516724083.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:43.930Z,1516724083.930 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:43.945Z,1516724083.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:44.327Z,1516724084.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:44.342Z,1516724084.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:44.709Z,1516724084.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:44.741Z,1516724084.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:45.108Z,1516724085.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:45.149Z,1516724085.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:45.509Z,1516724085.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:45.537Z,1516724085.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:45.909Z,1516724085.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:45.934Z,1516724085.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:46.323Z,1516724086.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:46.342Z,1516724086.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:46.732Z,1516724086.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:46.746Z,1516724086.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:47.127Z,1516724087.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:47.142Z,1516724087.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:47.508Z,1516724087.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:47.544Z,1516724087.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:47.909Z,1516724087.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:47.942Z,1516724087.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:48.313Z,1516724088.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:48.338Z,1516724088.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:48.710Z,1516724088.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:48.741Z,1516724088.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:49.112Z,1516724089.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:49.147Z,1516724089.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:49.531Z,1516724089.531 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:49.546Z,1516724089.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:49.931Z,1516724089.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:49.946Z,1516724089.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:50.319Z,1516724090.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:50.349Z,1516724090.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:50.713Z,1516724090.713 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:50.744Z,1516724090.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:51.108Z,1516724091.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:51.144Z,1516724091.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:51.510Z,1516724091.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:51.546Z,1516724091.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:51.913Z,1516724091.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:51.944Z,1516724091.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:52.320Z,1516724092.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:52.353Z,1516724092.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:52.732Z,1516724092.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:52.747Z,1516724092.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:53.119Z,1516724093.119 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:53.153Z,1516724093.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:53.508Z,1516724093.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:53.544Z,1516724093.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:53.909Z,1516724093.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:53.946Z,1516724093.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:54.313Z,1516724094.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:54.344Z,1516724094.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:54.710Z,1516724094.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:54.740Z,1516724094.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:55.108Z,1516724095.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:55.123Z,1516724095.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:55.520Z,1516724095.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:55.551Z,1516724095.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:55.931Z,1516724095.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:55.965Z,1516724095.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:56.323Z,1516724096.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:56.362Z,1516724096.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:56.714Z,1516724096.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:56.729Z,1516724096.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:57.113Z,1516724097.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:57.133Z,1516724097.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:57.514Z,1516724097.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:57.529Z,1516724097.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:57.913Z,1516724097.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:57.937Z,1516724097.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:58.320Z,1516724098.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:58.335Z,1516724098.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:58.723Z,1516724098.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:58.738Z,1516724098.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:59.131Z,1516724099.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:59.162Z,1516724099.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:59.514Z,1516724099.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:59.537Z,1516724099.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:14:59.921Z,1516724099.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:14:59.936Z,1516724099.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:00.316Z,1516724100.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:00.331Z,1516724100.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:00.712Z,1516724100.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:00.739Z,1516724100.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:01.114Z,1516724101.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:01.141Z,1516724101.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:01.528Z,1516724101.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:01.543Z,1516724101.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:01.926Z,1516724101.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:01.945Z,1516724101.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:02.327Z,1516724102.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:02.342Z,1516724102.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:02.720Z,1516724102.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:02.734Z,1516724102.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:03.112Z,1516724103.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:03.134Z,1516724103.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:03.517Z,1516724103.517 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:03.542Z,1516724103.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:03.914Z,1516724103.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:03.937Z,1516724103.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:03.941Z,1516724103.941 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T16:10:03.7Z 2018-01-23T16:15:03.941Z,1516724103.941 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:15:03.941Z,1516724103.941 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:15:04.326Z,1516724104.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:04.341Z,1516724104.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:04.843Z,1516724104.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:04.858Z,1516724104.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:05.132Z,1516724105.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:05.146Z,1516724105.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:08.282Z,1516724108.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:08.297Z,1516724108.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:08.371Z,1516724108.371 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0304.lzma 2018-01-23T16:15:08.391Z,1516724108.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:08.437Z,1516724108.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:08.778Z,1516724108.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:08.801Z,1516724108.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:09.146Z,1516724109.146 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0304.lzma.bak 2018-01-23T16:15:09.146Z,1516724109.146 [DataOverHttps](INFO): SBD MOMSN=7755840 2018-01-23T16:15:09.194Z,1516724109.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:09.209Z,1516724109.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:09.832Z,1516724109.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:09.853Z,1516724109.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:09.965Z,1516724109.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:10.005Z,1516724110.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:13.136Z,1516724113.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:13.151Z,1516724113.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:13.245Z,1516724113.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:13.292Z,1516724113.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:13.616Z,1516724113.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:13.642Z,1516724113.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:14.032Z,1516724114.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:14.056Z,1516724114.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:14.408Z,1516724114.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:14.444Z,1516724114.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:14.805Z,1516724114.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:14.840Z,1516724114.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:17.996Z,1516724117.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:18.012Z,1516724118.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:21.109Z,1516724121.109 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0305.lzma 2018-01-23T16:15:21.141Z,1516724121.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:21.158Z,1516724121.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:21.284Z,1516724121.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:21.300Z,1516724121.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:22.020Z,1516724122.020 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0305.lzma.bak 2018-01-23T16:15:22.021Z,1516724122.021 [DataOverHttps](INFO): SBD MOMSN=7755843 2018-01-23T16:15:22.084Z,1516724122.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:22.177Z,1516724122.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:22.628Z,1516724122.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:22.659Z,1516724122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:22.662Z,1516724122.662 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:15:22.662Z,1516724122.662 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:15:22.662Z,1516724122.662 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:15:22.753Z,1516724122.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:22.777Z,1516724122.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:25.813Z,1516724125.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:25.828Z,1516724125.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:25.925Z,1516724125.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:25.972Z,1516724125.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:26.283Z,1516724126.283 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:26.298Z,1516724126.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:26.695Z,1516724126.695 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:26.732Z,1516724126.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:27.091Z,1516724127.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:27.122Z,1516724127.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:27.474Z,1516724127.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:27.497Z,1516724127.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:27.877Z,1516724127.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:27.892Z,1516724127.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:28.280Z,1516724128.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:28.295Z,1516724128.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:28.683Z,1516724128.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:28.698Z,1516724128.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:29.079Z,1516724129.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:29.094Z,1516724129.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:29.478Z,1516724129.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:29.493Z,1516724129.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:29.877Z,1516724129.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:29.893Z,1516724129.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:30.291Z,1516724130.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:30.324Z,1516724130.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:30.683Z,1516724130.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:30.698Z,1516724130.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:31.091Z,1516724131.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:31.123Z,1516724131.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:31.477Z,1516724131.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:31.496Z,1516724131.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:31.877Z,1516724131.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:31.892Z,1516724131.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:32.280Z,1516724132.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:32.295Z,1516724132.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:32.683Z,1516724132.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:32.698Z,1516724132.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:33.080Z,1516724133.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:33.094Z,1516724133.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:33.482Z,1516724133.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:33.497Z,1516724133.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:33.877Z,1516724133.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:33.892Z,1516724133.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:34.279Z,1516724134.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:34.295Z,1516724134.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:34.683Z,1516724134.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:34.698Z,1516724134.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:35.091Z,1516724135.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:35.125Z,1516724135.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:35.478Z,1516724135.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:35.493Z,1516724135.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:35.874Z,1516724135.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:35.897Z,1516724135.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:36.279Z,1516724136.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:36.294Z,1516724136.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:36.683Z,1516724136.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:36.698Z,1516724136.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:37.091Z,1516724137.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:37.123Z,1516724137.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:37.476Z,1516724137.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:37.493Z,1516724137.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:37.874Z,1516724137.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:37.897Z,1516724137.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:38.279Z,1516724138.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:38.294Z,1516724138.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:38.682Z,1516724138.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:38.697Z,1516724138.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:39.083Z,1516724139.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:39.098Z,1516724139.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:39.481Z,1516724139.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:39.497Z,1516724139.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:39.877Z,1516724139.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:39.896Z,1516724139.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:40.276Z,1516724140.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:40.291Z,1516724140.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:40.676Z,1516724140.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:40.695Z,1516724140.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:41.077Z,1516724141.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:41.092Z,1516724141.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:41.482Z,1516724141.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:41.501Z,1516724141.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:41.883Z,1516724141.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:41.898Z,1516724141.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:42.282Z,1516724142.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:42.297Z,1516724142.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:42.676Z,1516724142.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:42.691Z,1516724142.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:43.072Z,1516724143.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:43.101Z,1516724143.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:43.477Z,1516724143.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:43.491Z,1516724143.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:43.873Z,1516724143.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:43.895Z,1516724143.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:44.276Z,1516724144.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:44.291Z,1516724144.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:44.683Z,1516724144.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:44.698Z,1516724144.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:45.087Z,1516724145.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:45.102Z,1516724145.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:45.482Z,1516724145.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:45.505Z,1516724145.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:45.878Z,1516724145.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:45.896Z,1516724145.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:46.277Z,1516724146.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:46.291Z,1516724146.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:46.682Z,1516724146.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:46.697Z,1516724146.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:47.079Z,1516724147.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:47.093Z,1516724147.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:47.483Z,1516724147.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:47.498Z,1516724147.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:47.884Z,1516724147.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:47.899Z,1516724147.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:48.285Z,1516724148.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:48.299Z,1516724148.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:48.678Z,1516724148.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:48.693Z,1516724148.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:49.077Z,1516724149.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:49.093Z,1516724149.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:49.479Z,1516724149.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:49.494Z,1516724149.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:49.876Z,1516724149.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:49.896Z,1516724149.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:50.282Z,1516724150.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:50.305Z,1516724150.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:50.688Z,1516724150.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:50.704Z,1516724150.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:51.086Z,1516724151.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:51.102Z,1516724151.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:51.488Z,1516724151.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:51.502Z,1516724151.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:51.880Z,1516724151.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:51.895Z,1516724151.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:52.272Z,1516724152.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:52.305Z,1516724152.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:52.683Z,1516724152.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:52.698Z,1516724152.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:53.079Z,1516724153.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:53.095Z,1516724153.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:53.489Z,1516724153.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:53.504Z,1516724153.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:53.890Z,1516724153.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:53.906Z,1516724153.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:54.288Z,1516724154.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:54.308Z,1516724154.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:54.676Z,1516724154.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:54.697Z,1516724154.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:55.072Z,1516724155.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:55.095Z,1516724155.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:55.477Z,1516724155.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:55.493Z,1516724155.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:55.881Z,1516724155.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:55.897Z,1516724155.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:56.271Z,1516724156.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:56.304Z,1516724156.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:56.688Z,1516724156.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:56.704Z,1516724156.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:57.086Z,1516724157.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:57.101Z,1516724157.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:57.487Z,1516724157.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:57.502Z,1516724157.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:57.875Z,1516724157.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:57.901Z,1516724157.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:58.266Z,1516724158.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:58.297Z,1516724158.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:58.681Z,1516724158.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:58.696Z,1516724158.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:59.067Z,1516724159.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:59.103Z,1516724159.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:59.487Z,1516724159.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:59.502Z,1516724159.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:59.504Z,1516724159.504 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:59.505Z,1516724159.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 259 2018-01-23T16:15:59.505Z,1516724159.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:15:59.517Z,1516724159.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:15:59.888Z,1516724159.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:15:59.908Z,1516724159.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:15:59.936Z,1516724159.936 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:15:59.936Z,1516724159.936 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 259 2018-01-23T16:16:00.288Z,1516724160.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:00.303Z,1516724160.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:00.304Z,1516724160.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:16:00.305Z,1516724160.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:16:00.305Z,1516724160.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:16:00.668Z,1516724160.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:00.701Z,1516724160.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:01.072Z,1516724161.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:01.105Z,1516724161.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:01.468Z,1516724161.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:01.615Z,1516724161.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:01.866Z,1516724161.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:01.881Z,1516724161.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:02.268Z,1516724162.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:02.305Z,1516724162.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:02.679Z,1516724162.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:02.714Z,1516724162.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:03.079Z,1516724163.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:03.106Z,1516724163.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:03.487Z,1516724163.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:03.513Z,1516724163.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:03.872Z,1516724163.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:03.887Z,1516724163.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:04.295Z,1516724164.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:04.346Z,1516724164.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:04.678Z,1516724164.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:04.693Z,1516724164.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:05.077Z,1516724165.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:05.092Z,1516724165.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:05.487Z,1516724165.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:05.518Z,1516724165.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:05.887Z,1516724165.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:05.914Z,1516724165.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:06.287Z,1516724166.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:06.302Z,1516724166.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:06.677Z,1516724166.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:06.692Z,1516724166.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:07.074Z,1516724167.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:07.115Z,1516724167.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:07.468Z,1516724167.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:07.502Z,1516724167.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:07.869Z,1516724167.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:07.904Z,1516724167.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:08.280Z,1516724168.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:08.317Z,1516724168.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:08.682Z,1516724168.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:08.697Z,1516724168.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:09.079Z,1516724169.079 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:09.094Z,1516724169.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:09.483Z,1516724169.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:09.498Z,1516724169.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:09.876Z,1516724169.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:09.896Z,1516724169.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:10.273Z,1516724170.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:10.288Z,1516724170.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:10.674Z,1516724170.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:10.697Z,1516724170.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:11.081Z,1516724171.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:11.095Z,1516724171.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:11.482Z,1516724171.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:11.501Z,1516724171.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:11.883Z,1516724171.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:11.898Z,1516724171.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:12.282Z,1516724172.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:12.297Z,1516724172.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:12.676Z,1516724172.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:12.691Z,1516724172.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:12.692Z,1516724172.692 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 259 2018-01-23T16:16:12.692Z,1516724172.692 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:16:12.693Z,1516724172.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:12.693Z,1516724172.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 259 2018-01-23T16:16:12.694Z,1516724172.694 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:16:12.706Z,1516724172.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:16:12.707Z,1516724172.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:16:13.072Z,1516724173.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:13.118Z,1516724173.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:16:13.118Z,1516724173.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 259 2018-01-23T16:16:13.118Z,1516724173.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:16:13.119Z,1516724173.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 259 2018-01-23T16:16:13.468Z,1516724173.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:13.503Z,1516724173.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:16:13.503Z,1516724173.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:16:13.504Z,1516724173.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:16:13.504Z,1516724173.504 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:16:13.504Z,1516724173.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:16:13.505Z,1516724173.505 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:16:13.869Z,1516724173.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:13.895Z,1516724173.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:16:13.896Z,1516724173.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:14.268Z,1516724174.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:14.300Z,1516724174.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:16:14.301Z,1516724174.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:14.692Z,1516724174.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:14.706Z,1516724174.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:16:14.707Z,1516724174.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:15.086Z,1516724175.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:15.101Z,1516724175.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:16:15.102Z,1516724175.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:15.486Z,1516724175.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:15.508Z,1516724175.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:16:15.509Z,1516724175.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:15.868Z,1516724175.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:15.895Z,1516724175.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:16:15.896Z,1516724175.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:16.266Z,1516724176.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:16.301Z,1516724176.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:16:16.302Z,1516724176.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:16.681Z,1516724176.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:16.696Z,1516724176.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:16:16.697Z,1516724176.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:17.068Z,1516724177.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:17.104Z,1516724177.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:16:17.105Z,1516724177.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:17.491Z,1516724177.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:17.505Z,1516724177.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:16:17.506Z,1516724177.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:17.890Z,1516724177.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:17.905Z,1516724177.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:16:17.906Z,1516724177.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:18.285Z,1516724178.285 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:18.311Z,1516724178.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:16:18.312Z,1516724178.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:18.668Z,1516724178.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:18.704Z,1516724178.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:16:18.705Z,1516724178.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:19.068Z,1516724179.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:19.094Z,1516724179.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:16:19.095Z,1516724179.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:19.467Z,1516724179.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:19.503Z,1516724179.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:16:19.504Z,1516724179.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:19.873Z,1516724179.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:19.899Z,1516724179.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:16:19.900Z,1516724179.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:20.268Z,1516724180.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:20.300Z,1516724180.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:16:20.301Z,1516724180.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:20.686Z,1516724180.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:20.706Z,1516724180.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:16:20.707Z,1516724180.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:21.085Z,1516724181.085 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:21.112Z,1516724181.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:16:21.113Z,1516724181.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:21.479Z,1516724181.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:21.505Z,1516724181.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:16:21.506Z,1516724181.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:21.868Z,1516724181.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:21.905Z,1516724181.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:16:21.906Z,1516724181.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:22.266Z,1516724182.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:22.281Z,1516724182.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:16:22.282Z,1516724182.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:22.669Z,1516724182.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:22.684Z,1516724182.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:16:22.685Z,1516724182.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:23.073Z,1516724183.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:23.087Z,1516724183.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:16:23.088Z,1516724183.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:27.189Z,1516724187.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:27.225Z,1516724187.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T16:16:27.226Z,1516724187.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:27.361Z,1516724187.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:27.397Z,1516724187.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T16:16:27.397Z,1516724187.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:27.737Z,1516724187.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:27.805Z,1516724187.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T16:16:27.806Z,1516724187.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:28.123Z,1516724188.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:28.179Z,1516724188.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T16:16:28.180Z,1516724188.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:28.543Z,1516724188.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:28.595Z,1516724188.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T16:16:28.596Z,1516724188.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:28.915Z,1516724188.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:28.998Z,1516724188.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T16:16:28.999Z,1516724188.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:29.308Z,1516724189.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:29.340Z,1516724189.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s. 2018-01-23T16:16:29.341Z,1516724189.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:29.731Z,1516724189.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:29.746Z,1516724189.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T16:16:29.748Z,1516724189.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:30.135Z,1516724190.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:30.150Z,1516724190.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T16:16:30.151Z,1516724190.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:30.526Z,1516724190.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:30.597Z,1516724190.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T16:16:30.598Z,1516724190.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:30.945Z,1516724190.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:30.966Z,1516724190.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T16:16:30.972Z,1516724190.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:31.326Z,1516724191.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:31.400Z,1516724191.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T16:16:31.402Z,1516724191.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:31.727Z,1516724191.727 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:31.762Z,1516724191.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T16:16:31.768Z,1516724191.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:32.156Z,1516724192.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:32.189Z,1516724192.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T16:16:32.190Z,1516724192.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:32.537Z,1516724192.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:32.660Z,1516724192.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T16:16:32.661Z,1516724192.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:32.934Z,1516724192.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:32.974Z,1516724192.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:33.366Z,1516724193.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:33.411Z,1516724193.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:33.718Z,1516724193.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:33.750Z,1516724193.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:34.110Z,1516724194.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:34.146Z,1516724194.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:34.514Z,1516724194.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:34.545Z,1516724194.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:34.911Z,1516724194.911 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:34.968Z,1516724194.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:35.310Z,1516724195.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:35.349Z,1516724195.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:35.725Z,1516724195.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:35.764Z,1516724195.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:36.129Z,1516724196.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:36.180Z,1516724196.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:36.527Z,1516724196.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:36.561Z,1516724196.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:36.918Z,1516724196.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:36.963Z,1516724196.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:37.319Z,1516724197.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:37.370Z,1516724197.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:37.728Z,1516724197.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:37.768Z,1516724197.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:38.131Z,1516724198.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:38.163Z,1516724198.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:38.533Z,1516724198.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:38.571Z,1516724198.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:38.925Z,1516724198.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:38.945Z,1516724198.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:39.328Z,1516724199.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:39.350Z,1516724199.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:39.724Z,1516724199.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:39.791Z,1516724199.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:40.110Z,1516724200.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:40.140Z,1516724200.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:40.539Z,1516724200.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:40.587Z,1516724200.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:40.915Z,1516724200.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:40.968Z,1516724200.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:41.310Z,1516724201.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:41.346Z,1516724201.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:41.749Z,1516724201.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:41.773Z,1516724201.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:42.129Z,1516724202.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:42.161Z,1516724202.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:42.526Z,1516724202.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:42.545Z,1516724202.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:42.914Z,1516724202.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:42.937Z,1516724202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:43.343Z,1516724203.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:43.418Z,1516724203.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:43.711Z,1516724203.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:43.739Z,1516724203.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:44.107Z,1516724204.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:44.129Z,1516724204.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:44.519Z,1516724204.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:44.535Z,1516724204.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:44.923Z,1516724204.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:44.938Z,1516724204.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:45.323Z,1516724205.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:45.338Z,1516724205.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:45.714Z,1516724205.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:45.730Z,1516724205.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:46.109Z,1516724206.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:46.129Z,1516724206.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:46.509Z,1516724206.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:46.529Z,1516724206.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:46.912Z,1516724206.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:46.927Z,1516724206.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:47.310Z,1516724207.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:47.329Z,1516724207.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:47.724Z,1516724207.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:47.750Z,1516724207.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:48.135Z,1516724208.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:48.169Z,1516724208.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:48.524Z,1516724208.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:48.548Z,1516724208.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:48.914Z,1516724208.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:48.933Z,1516724208.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:49.316Z,1516724209.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:49.333Z,1516724209.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:49.714Z,1516724209.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:49.733Z,1516724209.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:50.117Z,1516724210.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:50.132Z,1516724210.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:50.523Z,1516724210.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:50.545Z,1516724210.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:50.923Z,1516724210.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:50.939Z,1516724210.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:51.322Z,1516724211.322 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:51.337Z,1516724211.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:51.718Z,1516724211.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:51.733Z,1516724211.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:52.117Z,1516724212.117 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:52.131Z,1516724212.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:52.518Z,1516724212.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:52.533Z,1516724212.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:52.924Z,1516724212.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:52.939Z,1516724212.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:53.313Z,1516724213.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:53.340Z,1516724213.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:53.728Z,1516724213.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:53.743Z,1516724213.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:54.124Z,1516724214.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:54.151Z,1516724214.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:54.528Z,1516724214.528 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:54.549Z,1516724214.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:54.927Z,1516724214.927 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:54.942Z,1516724214.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:55.316Z,1516724215.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:55.336Z,1516724215.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:55.720Z,1516724215.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:55.742Z,1516724215.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:56.109Z,1516724216.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:56.148Z,1516724216.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:56.533Z,1516724216.533 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:56.549Z,1516724216.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:56.928Z,1516724216.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:56.951Z,1516724216.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:57.326Z,1516724217.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:57.354Z,1516724217.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:57.708Z,1516724217.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:57.746Z,1516724217.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:58.108Z,1516724218.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:58.145Z,1516724218.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:58.512Z,1516724218.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:58.547Z,1516724218.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:58.909Z,1516724218.909 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:58.949Z,1516724218.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:59.316Z,1516724219.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:59.352Z,1516724219.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:16:59.740Z,1516724219.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:16:59.755Z,1516724219.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:00.127Z,1516724220.127 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:00.160Z,1516724220.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:00.527Z,1516724220.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:00.553Z,1516724220.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:00.920Z,1516724220.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:00.952Z,1516724220.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:01.313Z,1516724221.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:01.356Z,1516724221.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:01.714Z,1516724221.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:01.729Z,1516724221.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:02.116Z,1516724222.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:02.153Z,1516724222.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:02.527Z,1516724222.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:02.562Z,1516724222.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:02.904Z,1516724222.904 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:17:02.904Z,1516724222.904 [NAL9602] Data Fault, FailCount= 1 2018-01-23T16:17:02.904Z,1516724222.904 [NAL9602](ERROR): Data Fault 2018-01-23T16:17:02.921Z,1516724222.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:02.961Z,1516724222.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:02.987Z,1516724222.987 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:17:03.296Z,1516724223.296 [NAL9602](INFO): Powering down 2018-01-23T16:17:03.313Z,1516724223.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:03.332Z,1516724223.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:03.715Z,1516724223.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:03.730Z,1516724223.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:04.115Z,1516724224.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:04.130Z,1516724224.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:04.143Z,1516724224.143 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T16:17:04.143Z,1516724224.143 [NAL9602] No Fault, FailCount= 1 2018-01-23T16:17:04.520Z,1516724224.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:04.534Z,1516724224.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:04.913Z,1516724224.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:04.928Z,1516724224.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:05.316Z,1516724225.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:05.331Z,1516724225.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:05.723Z,1516724225.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:05.737Z,1516724225.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:06.113Z,1516724226.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:06.128Z,1516724226.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:06.516Z,1516724226.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:06.535Z,1516724226.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:06.910Z,1516724226.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:06.941Z,1516724226.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:07.313Z,1516724227.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:07.328Z,1516724227.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:07.716Z,1516724227.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:07.731Z,1516724227.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:08.116Z,1516724228.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:08.130Z,1516724228.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:08.516Z,1516724228.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:08.530Z,1516724228.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:08.916Z,1516724228.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:08.931Z,1516724228.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:09.316Z,1516724229.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:09.330Z,1516724229.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:09.716Z,1516724229.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:09.730Z,1516724229.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:10.116Z,1516724230.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:10.131Z,1516724230.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:10.515Z,1516724230.515 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:10.530Z,1516724230.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:10.913Z,1516724230.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:10.928Z,1516724230.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:11.316Z,1516724231.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:11.331Z,1516724231.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:11.715Z,1516724231.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:11.736Z,1516724231.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:12.113Z,1516724232.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:12.128Z,1516724232.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:12.516Z,1516724232.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:12.531Z,1516724232.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:12.916Z,1516724232.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:12.930Z,1516724232.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:13.313Z,1516724233.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:13.328Z,1516724233.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:13.716Z,1516724233.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:13.731Z,1516724233.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:14.116Z,1516724234.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:14.136Z,1516724234.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:14.520Z,1516724234.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:14.534Z,1516724234.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:14.916Z,1516724234.916 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:14.931Z,1516724234.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:15.321Z,1516724235.321 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:15.335Z,1516724235.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:15.720Z,1516724235.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:15.735Z,1516724235.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:16.115Z,1516724236.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:16.130Z,1516724236.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:16.516Z,1516724236.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:16.530Z,1516724236.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:16.913Z,1516724236.913 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:16.928Z,1516724236.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:17.316Z,1516724237.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:17.331Z,1516724237.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:17.716Z,1516724237.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:17.730Z,1516724237.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:18.113Z,1516724238.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:18.128Z,1516724238.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:18.516Z,1516724238.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:18.531Z,1516724238.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:18.910Z,1516724238.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:18.946Z,1516724238.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:19.313Z,1516724239.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:19.328Z,1516724239.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:19.712Z,1516724239.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:19.734Z,1516724239.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:20.116Z,1516724240.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:20.130Z,1516724240.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:20.516Z,1516724240.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:20.531Z,1516724240.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:20.912Z,1516724240.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:20.934Z,1516724240.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:21.311Z,1516724241.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:21.333Z,1516724241.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:21.716Z,1516724241.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:21.731Z,1516724241.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:22.116Z,1516724242.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:22.131Z,1516724242.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:22.516Z,1516724242.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:22.530Z,1516724242.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:22.914Z,1516724242.914 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:22.929Z,1516724242.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:23.317Z,1516724243.317 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:23.332Z,1516724243.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:26.410Z,1516724246.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:26.425Z,1516724246.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:26.527Z,1516724246.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:26.571Z,1516724246.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:26.872Z,1516724246.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:26.899Z,1516724246.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:27.282Z,1516724247.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:27.296Z,1516724247.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:27.681Z,1516724247.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:27.696Z,1516724247.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:28.082Z,1516724248.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:28.097Z,1516724248.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:28.477Z,1516724248.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:28.491Z,1516724248.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:28.879Z,1516724248.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:28.894Z,1516724248.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:29.278Z,1516724249.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:29.293Z,1516724249.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:29.677Z,1516724249.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:29.692Z,1516724249.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:30.075Z,1516724250.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:30.090Z,1516724250.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:30.470Z,1516724250.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:30.506Z,1516724250.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:30.880Z,1516724250.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:30.895Z,1516724250.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:31.275Z,1516724251.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:31.291Z,1516724251.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:31.676Z,1516724251.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:31.695Z,1516724251.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:32.077Z,1516724252.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:32.092Z,1516724252.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:32.479Z,1516724252.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:32.494Z,1516724252.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:32.875Z,1516724252.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:32.896Z,1516724252.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:33.281Z,1516724253.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:33.296Z,1516724253.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:33.656Z,1516724253.656 [NAL9602](INFO): Powering up NAL9602 2018-01-23T16:17:33.685Z,1516724253.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:33.701Z,1516724253.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:34.076Z,1516724254.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:34.092Z,1516724254.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:34.476Z,1516724254.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:34.491Z,1516724254.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:34.873Z,1516724254.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:34.889Z,1516724254.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:35.275Z,1516724255.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:35.290Z,1516724255.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:35.674Z,1516724255.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:35.700Z,1516724255.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:36.076Z,1516724256.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:36.091Z,1516724256.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:36.476Z,1516724256.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:36.490Z,1516724256.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:36.874Z,1516724256.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:36.904Z,1516724256.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:37.273Z,1516724257.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:37.288Z,1516724257.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:37.678Z,1516724257.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:37.705Z,1516724257.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:38.080Z,1516724258.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:38.095Z,1516724258.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:38.480Z,1516724258.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:38.495Z,1516724258.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:38.874Z,1516724258.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:38.902Z,1516724258.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:39.276Z,1516724259.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:39.290Z,1516724259.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:39.676Z,1516724259.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:39.691Z,1516724259.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:40.074Z,1516724260.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:40.096Z,1516724260.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:40.476Z,1516724260.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:40.501Z,1516724260.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:40.876Z,1516724260.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:40.891Z,1516724260.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:41.274Z,1516724261.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:41.323Z,1516724261.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:41.680Z,1516724261.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:41.695Z,1516724261.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:42.073Z,1516724262.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:42.088Z,1516724262.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:42.474Z,1516724262.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:42.502Z,1516724262.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:42.880Z,1516724262.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:42.895Z,1516724262.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:43.273Z,1516724263.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:43.289Z,1516724263.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:43.674Z,1516724263.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:43.702Z,1516724263.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:44.076Z,1516724264.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:44.091Z,1516724264.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:44.486Z,1516724264.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:44.501Z,1516724264.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:44.852Z,1516724264.852 [NAL9602](INFO): NAL9602 initialized 2018-01-23T16:17:44.876Z,1516724264.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:44.909Z,1516724264.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:45.280Z,1516724265.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:45.295Z,1516724265.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:45.687Z,1516724265.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:45.702Z,1516724265.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:46.086Z,1516724266.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:46.101Z,1516724266.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:46.476Z,1516724266.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:46.491Z,1516724266.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:46.879Z,1516724266.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:46.894Z,1516724266.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:47.277Z,1516724267.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:47.292Z,1516724267.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:47.686Z,1516724267.686 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:47.704Z,1516724267.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:48.086Z,1516724268.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:48.101Z,1516724268.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:48.487Z,1516724268.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:48.502Z,1516724268.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:48.876Z,1516724268.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:48.891Z,1516724268.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:49.273Z,1516724269.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:49.296Z,1516724269.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:49.681Z,1516724269.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:49.697Z,1516724269.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:50.076Z,1516724270.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:50.102Z,1516724270.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:50.488Z,1516724270.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:50.503Z,1516724270.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:50.890Z,1516724270.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:50.904Z,1516724270.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:51.287Z,1516724271.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:51.308Z,1516724271.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:51.666Z,1516724271.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:51.693Z,1516724271.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:52.089Z,1516724272.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:52.109Z,1516724272.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:52.472Z,1516724272.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:52.511Z,1516724272.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:52.878Z,1516724272.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:52.893Z,1516724272.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:53.271Z,1516724273.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:53.298Z,1516724273.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:53.688Z,1516724273.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:53.708Z,1516724273.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:54.086Z,1516724274.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:54.106Z,1516724274.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:54.487Z,1516724274.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:54.502Z,1516724274.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:54.868Z,1516724274.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:54.905Z,1516724274.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:55.266Z,1516724275.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:55.297Z,1516724275.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:55.669Z,1516724275.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:55.701Z,1516724275.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:56.068Z,1516724276.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:56.096Z,1516724276.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:56.488Z,1516724276.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:56.503Z,1516724276.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:56.890Z,1516724276.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:56.905Z,1516724276.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:57.284Z,1516724277.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:57.315Z,1516724277.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:57.669Z,1516724277.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:57.705Z,1516724277.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:58.068Z,1516724278.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:58.101Z,1516724278.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:58.468Z,1516724278.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:58.506Z,1516724278.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:58.869Z,1516724278.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:58.901Z,1516724278.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:59.272Z,1516724279.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:59.298Z,1516724279.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:17:59.688Z,1516724279.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:17:59.703Z,1516724279.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:00.090Z,1516724280.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:00.113Z,1516724280.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:00.496Z,1516724280.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:00.511Z,1516724280.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:00.869Z,1516724280.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:00.892Z,1516724280.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:01.273Z,1516724281.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:01.304Z,1516724281.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:01.678Z,1516724281.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:01.709Z,1516724281.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:02.069Z,1516724282.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:02.105Z,1516724282.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:02.480Z,1516724282.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:02.507Z,1516724282.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:02.892Z,1516724282.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:02.918Z,1516724282.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:03.292Z,1516724283.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:03.325Z,1516724283.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:03.676Z,1516724283.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:03.692Z,1516724283.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:04.075Z,1516724284.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:04.093Z,1516724284.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:04.478Z,1516724284.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:04.494Z,1516724284.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:04.878Z,1516724284.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:04.892Z,1516724284.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:05.274Z,1516724285.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:05.302Z,1516724285.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:05.687Z,1516724285.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:05.702Z,1516724285.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:06.087Z,1516724286.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:06.102Z,1516724286.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:06.486Z,1516724286.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:06.512Z,1516724286.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:06.881Z,1516724286.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:06.896Z,1516724286.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:07.279Z,1516724287.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:07.294Z,1516724287.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:07.674Z,1516724287.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:07.705Z,1516724287.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:08.082Z,1516724288.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:08.097Z,1516724288.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:08.489Z,1516724288.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:08.509Z,1516724288.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:08.895Z,1516724288.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:08.910Z,1516724288.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:09.286Z,1516724289.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:09.314Z,1516724289.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:09.669Z,1516724289.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:09.707Z,1516724289.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:10.068Z,1516724290.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:10.101Z,1516724290.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:10.472Z,1516724290.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:10.501Z,1516724290.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:10.869Z,1516724290.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:10.902Z,1516724290.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:11.272Z,1516724291.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:11.308Z,1516724291.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:11.692Z,1516724291.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:11.709Z,1516724291.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:12.092Z,1516724292.092 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:12.109Z,1516724292.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:12.480Z,1516724292.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:12.517Z,1516724292.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:12.872Z,1516724292.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:12.915Z,1516724292.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:13.268Z,1516724293.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:13.283Z,1516724293.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:13.669Z,1516724293.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:13.684Z,1516724293.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:14.072Z,1516724294.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:14.087Z,1516724294.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:14.487Z,1516724294.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:14.514Z,1516724294.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:14.887Z,1516724294.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:14.902Z,1516724294.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:15.279Z,1516724295.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:15.300Z,1516724295.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:15.681Z,1516724295.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:15.696Z,1516724295.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:16.076Z,1516724296.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:16.091Z,1516724296.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:16.476Z,1516724296.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:16.496Z,1516724296.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:16.878Z,1516724296.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:16.893Z,1516724296.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:17.276Z,1516724297.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:17.291Z,1516724297.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:17.694Z,1516724297.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:17.727Z,1516724297.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:18.087Z,1516724298.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:18.102Z,1516724298.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:18.480Z,1516724298.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:18.501Z,1516724298.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:18.876Z,1516724298.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:18.896Z,1516724298.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:19.281Z,1516724299.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:19.296Z,1516724299.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:19.673Z,1516724299.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:19.694Z,1516724299.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:20.076Z,1516724300.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:20.096Z,1516724300.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:20.482Z,1516724300.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:20.498Z,1516724300.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:20.883Z,1516724300.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:20.898Z,1516724300.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:21.294Z,1516724301.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:21.309Z,1516724301.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:21.680Z,1516724301.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:21.695Z,1516724301.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:22.076Z,1516724302.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:22.091Z,1516724302.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:22.476Z,1516724302.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:22.491Z,1516724302.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:22.878Z,1516724302.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:22.893Z,1516724302.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:23.276Z,1516724303.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:23.291Z,1516724303.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:23.682Z,1516724303.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:23.704Z,1516724303.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:26.789Z,1516724306.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:26.804Z,1516724306.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:26.926Z,1516724306.926 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:26.961Z,1516724306.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:27.280Z,1516724307.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:27.301Z,1516724307.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:27.685Z,1516724307.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:27.700Z,1516724307.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:28.073Z,1516724308.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:28.092Z,1516724308.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:28.482Z,1516724308.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:28.509Z,1516724308.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:28.890Z,1516724308.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:28.913Z,1516724308.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:29.287Z,1516724309.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:29.301Z,1516724309.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:29.672Z,1516724309.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:29.697Z,1516724309.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:30.077Z,1516724310.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:30.096Z,1516724310.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:30.480Z,1516724310.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:30.495Z,1516724310.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:30.885Z,1516724310.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:30.900Z,1516724310.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:31.277Z,1516724311.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:31.297Z,1516724311.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:31.690Z,1516724311.690 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:31.709Z,1516724311.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:32.090Z,1516724312.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:32.113Z,1516724312.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:32.491Z,1516724312.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:32.513Z,1516724312.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:32.866Z,1516724312.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:32.893Z,1516724312.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:33.272Z,1516724313.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:33.294Z,1516724313.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:33.672Z,1516724313.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:33.709Z,1516724313.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:34.066Z,1516724314.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:34.089Z,1516724314.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:34.479Z,1516724314.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:34.514Z,1516724314.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:34.893Z,1516724314.893 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:34.908Z,1516724314.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:35.279Z,1516724315.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:35.313Z,1516724315.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:35.672Z,1516724315.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:35.704Z,1516724315.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:36.069Z,1516724316.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:36.100Z,1516724316.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:36.468Z,1516724316.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:36.505Z,1516724316.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:36.869Z,1516724316.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:36.884Z,1516724316.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:37.276Z,1516724317.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:37.313Z,1516724317.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:37.687Z,1516724317.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:37.718Z,1516724317.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:38.087Z,1516724318.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:38.102Z,1516724318.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:38.491Z,1516724318.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:38.506Z,1516724318.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:38.881Z,1516724318.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:38.896Z,1516724318.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:39.282Z,1516724319.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:39.297Z,1516724319.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:39.677Z,1516724319.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:39.700Z,1516724319.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:40.077Z,1516724320.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:40.092Z,1516724320.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:40.499Z,1516724320.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:40.530Z,1516724320.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:40.888Z,1516724320.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:40.903Z,1516724320.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:41.287Z,1516724321.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:41.302Z,1516724321.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:41.672Z,1516724321.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:41.705Z,1516724321.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:42.082Z,1516724322.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:42.097Z,1516724322.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:42.472Z,1516724322.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:42.503Z,1516724322.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:42.869Z,1516724322.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:42.905Z,1516724322.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:43.269Z,1516724323.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:43.305Z,1516724323.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:43.691Z,1516724323.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:43.713Z,1516724323.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:44.095Z,1516724324.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:44.113Z,1516724324.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:44.488Z,1516724324.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:44.504Z,1516724324.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:44.868Z,1516724324.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:44.894Z,1516724324.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:45.268Z,1516724325.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:45.305Z,1516724325.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:45.691Z,1516724325.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:45.706Z,1516724325.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:46.068Z,1516724326.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:46.105Z,1516724326.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:46.487Z,1516724326.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:46.508Z,1516724326.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:46.897Z,1516724326.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:46.912Z,1516724326.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:47.300Z,1516724327.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:47.315Z,1516724327.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:47.670Z,1516724327.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:47.702Z,1516724327.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:48.074Z,1516724328.074 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:48.111Z,1516724328.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:48.469Z,1516724328.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:48.501Z,1516724328.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:48.874Z,1516724328.874 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:48.906Z,1516724328.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:49.268Z,1516724329.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:49.284Z,1516724329.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:49.685Z,1516724329.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:49.717Z,1516724329.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:50.106Z,1516724330.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:50.129Z,1516724330.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:50.488Z,1516724330.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:50.517Z,1516724330.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:50.873Z,1516724330.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:50.890Z,1516724330.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:51.273Z,1516724331.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:51.289Z,1516724331.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:51.675Z,1516724331.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:51.704Z,1516724331.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:52.076Z,1516724332.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:52.091Z,1516724332.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:52.481Z,1516724332.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:52.501Z,1516724332.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:52.882Z,1516724332.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:52.897Z,1516724332.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:53.282Z,1516724333.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:53.300Z,1516724333.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:53.676Z,1516724333.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:53.691Z,1516724333.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:54.077Z,1516724334.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:54.091Z,1516724334.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:54.476Z,1516724334.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:54.491Z,1516724334.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:54.876Z,1516724334.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:54.894Z,1516724334.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:55.277Z,1516724335.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:55.292Z,1516724335.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:55.682Z,1516724335.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:55.701Z,1516724335.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:56.083Z,1516724336.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:56.098Z,1516724336.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:56.482Z,1516724336.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:56.497Z,1516724336.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:56.876Z,1516724336.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:56.891Z,1516724336.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:57.276Z,1516724337.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:57.291Z,1516724337.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:57.678Z,1516724337.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:57.700Z,1516724337.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:58.080Z,1516724338.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:58.095Z,1516724338.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:58.481Z,1516724338.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:58.501Z,1516724338.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:58.886Z,1516724338.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:58.909Z,1516724338.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:59.286Z,1516724339.286 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:59.301Z,1516724339.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:18:59.677Z,1516724339.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:18:59.692Z,1516724339.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:00.077Z,1516724340.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:00.092Z,1516724340.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:00.472Z,1516724340.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:00.494Z,1516724340.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:00.496Z,1516724340.496 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:00.496Z,1516724340.496 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 260 2018-01-23T16:19:00.496Z,1516724340.497 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:19:00.508Z,1516724340.508 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:19:00.876Z,1516724340.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:00.899Z,1516724340.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:00.924Z,1516724340.924 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:19:00.924Z,1516724340.924 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 260 2018-01-23T16:19:01.268Z,1516724341.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:01.301Z,1516724341.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:01.302Z,1516724341.302 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:19:01.302Z,1516724341.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:19:01.303Z,1516724341.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:19:01.688Z,1516724341.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:01.709Z,1516724341.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:02.091Z,1516724342.091 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:02.106Z,1516724342.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:02.486Z,1516724342.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:02.521Z,1516724342.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:02.872Z,1516724342.872 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:02.899Z,1516724342.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:03.268Z,1516724343.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:03.301Z,1516724343.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:03.676Z,1516724343.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:03.704Z,1516724343.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:04.072Z,1516724344.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:04.104Z,1516724344.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:04.479Z,1516724344.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:04.517Z,1516724344.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:04.896Z,1516724344.896 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:04.911Z,1516724344.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:05.295Z,1516724345.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:05.310Z,1516724345.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:05.668Z,1516724345.668 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:05.709Z,1516724345.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:06.072Z,1516724346.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:06.087Z,1516724346.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:06.476Z,1516724346.476 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:06.523Z,1516724346.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:06.881Z,1516724346.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:06.896Z,1516724346.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:07.273Z,1516724347.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:07.299Z,1516724347.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:07.691Z,1516724347.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:07.722Z,1516724347.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:08.095Z,1516724348.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:08.120Z,1516724348.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:08.490Z,1516724348.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:08.525Z,1516724348.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:08.878Z,1516724348.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:08.897Z,1516724348.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:09.274Z,1516724349.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:09.298Z,1516724349.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:09.681Z,1516724349.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:09.696Z,1516724349.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:10.082Z,1516724350.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:10.097Z,1516724350.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:10.482Z,1516724350.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:10.505Z,1516724350.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:10.890Z,1516724350.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:10.905Z,1516724350.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:11.287Z,1516724351.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:11.302Z,1516724351.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:11.688Z,1516724351.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:11.703Z,1516724351.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:12.081Z,1516724352.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:12.095Z,1516724352.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:12.487Z,1516724352.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:12.502Z,1516724352.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:12.890Z,1516724352.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:12.905Z,1516724352.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:13.290Z,1516724353.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:13.305Z,1516724353.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:13.688Z,1516724353.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:13.709Z,1516724353.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:13.709Z,1516724353.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 260 2018-01-23T16:19:13.709Z,1516724353.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:19:13.711Z,1516724353.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:13.711Z,1516724353.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 260 2018-01-23T16:19:13.711Z,1516724353.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:19:13.756Z,1516724353.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:19:13.756Z,1516724353.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:19:14.068Z,1516724354.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:14.105Z,1516724354.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:19:14.105Z,1516724354.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 260 2018-01-23T16:19:14.106Z,1516724354.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:19:14.106Z,1516724354.106 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 260 2018-01-23T16:19:14.488Z,1516724354.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:14.501Z,1516724354.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:19:14.502Z,1516724354.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:19:14.502Z,1516724354.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:19:14.503Z,1516724354.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:19:14.503Z,1516724354.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:19:14.503Z,1516724354.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:19:14.888Z,1516724354.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:14.910Z,1516724354.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:19:14.915Z,1516724354.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:15.295Z,1516724355.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:15.310Z,1516724355.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:19:15.311Z,1516724355.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:15.669Z,1516724355.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:15.712Z,1516724355.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:19:15.713Z,1516724355.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:16.072Z,1516724356.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:16.108Z,1516724356.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:19:16.109Z,1516724356.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:16.483Z,1516724356.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:16.517Z,1516724356.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:19:16.518Z,1516724356.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:16.900Z,1516724356.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:16.915Z,1516724356.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:19:16.916Z,1516724356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:17.296Z,1516724357.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:17.310Z,1516724357.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:19:17.311Z,1516724357.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:17.672Z,1516724357.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:17.686Z,1516724357.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:19:17.699Z,1516724357.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:18.073Z,1516724358.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:18.088Z,1516724358.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:19:18.089Z,1516724358.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:18.487Z,1516724358.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:18.514Z,1516724358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:19:18.515Z,1516724358.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:18.903Z,1516724358.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:18.918Z,1516724358.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:19:18.919Z,1516724358.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:19.279Z,1516724359.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:19.314Z,1516724359.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:19:19.315Z,1516724359.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:19.672Z,1516724359.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:19.687Z,1516724359.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:19:19.688Z,1516724359.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:20.076Z,1516724360.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:20.113Z,1516724360.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:19:20.114Z,1516724360.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:20.492Z,1516724360.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:20.518Z,1516724360.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:19:20.519Z,1516724360.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:20.892Z,1516724360.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:20.916Z,1516724360.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:19:20.917Z,1516724360.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:21.296Z,1516724361.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:21.324Z,1516724361.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:19:21.325Z,1516724361.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:21.681Z,1516724361.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:21.695Z,1516724361.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:19:21.696Z,1516724361.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:22.080Z,1516724362.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:22.100Z,1516724362.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:19:22.101Z,1516724362.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:22.479Z,1516724362.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:22.494Z,1516724362.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:19:22.495Z,1516724362.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:22.884Z,1516724362.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:22.904Z,1516724362.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:19:22.905Z,1516724362.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:23.295Z,1516724363.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:23.326Z,1516724363.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:19:23.327Z,1516724363.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:23.683Z,1516724363.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:23.698Z,1516724363.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:19:23.699Z,1516724363.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:26.765Z,1516724366.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:26.780Z,1516724366.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T16:19:26.781Z,1516724366.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:26.904Z,1516724366.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:26.918Z,1516724366.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:19:26.931Z,1516724366.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:27.248Z,1516724367.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:27.269Z,1516724367.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:19:27.270Z,1516724367.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:27.647Z,1516724367.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:27.690Z,1516724367.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:19:27.691Z,1516724367.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:28.022Z,1516724368.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:28.048Z,1516724368.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T16:19:28.049Z,1516724368.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:28.428Z,1516724368.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:28.451Z,1516724368.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T16:19:28.453Z,1516724368.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:28.834Z,1516724368.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:28.852Z,1516724368.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T16:19:28.853Z,1516724368.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:29.228Z,1516724369.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:29.250Z,1516724369.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T16:19:29.251Z,1516724369.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:29.643Z,1516724369.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:29.663Z,1516724369.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:19:29.665Z,1516724369.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:30.047Z,1516724370.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:30.065Z,1516724370.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:19:30.066Z,1516724370.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:30.440Z,1516724370.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:30.476Z,1516724370.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:19:30.477Z,1516724370.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:30.828Z,1516724370.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:30.872Z,1516724370.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:19:30.874Z,1516724370.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:31.228Z,1516724371.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:31.255Z,1516724371.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T16:19:31.256Z,1516724371.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:31.622Z,1516724371.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:31.646Z,1516724371.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T16:19:31.647Z,1516724371.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:32.025Z,1516724372.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:32.056Z,1516724372.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T16:19:32.057Z,1516724372.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:32.425Z,1516724372.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:32.439Z,1516724372.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T16:19:32.440Z,1516724372.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:32.835Z,1516724372.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:32.862Z,1516724372.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:19:32.868Z,1516724372.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:33.247Z,1516724373.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:33.274Z,1516724373.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:19:33.275Z,1516724373.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:33.648Z,1516724373.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:33.680Z,1516724373.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:19:33.681Z,1516724373.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:34.025Z,1516724374.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:34.066Z,1516724374.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:34.436Z,1516724374.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:34.474Z,1516724374.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:34.837Z,1516724374.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:34.880Z,1516724374.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:35.225Z,1516724375.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:35.240Z,1516724375.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:35.645Z,1516724375.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:35.676Z,1516724375.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:36.051Z,1516724376.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:36.081Z,1516724376.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:36.440Z,1516724376.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:36.454Z,1516724376.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:36.829Z,1516724376.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:36.853Z,1516724376.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:37.233Z,1516724377.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:37.248Z,1516724377.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:37.631Z,1516724377.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:37.653Z,1516724377.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:38.032Z,1516724378.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:38.047Z,1516724378.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:38.432Z,1516724378.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:38.447Z,1516724378.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:38.836Z,1516724378.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:38.857Z,1516724378.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:39.239Z,1516724379.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:39.254Z,1516724379.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:39.639Z,1516724379.639 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:39.654Z,1516724379.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:40.029Z,1516724380.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:40.048Z,1516724380.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:40.432Z,1516724380.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:40.453Z,1516724380.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:40.834Z,1516724380.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:40.849Z,1516724380.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:41.232Z,1516724381.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:41.247Z,1516724381.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:41.638Z,1516724381.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:41.685Z,1516724381.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:42.039Z,1516724382.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:42.060Z,1516724382.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:42.438Z,1516724382.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:42.453Z,1516724382.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:42.832Z,1516724382.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:42.847Z,1516724382.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:43.233Z,1516724383.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:43.248Z,1516724383.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:43.632Z,1516724383.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:43.647Z,1516724383.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:44.032Z,1516724384.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:44.051Z,1516724384.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:44.433Z,1516724384.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:44.447Z,1516724384.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:44.838Z,1516724384.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:44.857Z,1516724384.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:45.240Z,1516724385.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:45.261Z,1516724385.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:45.643Z,1516724385.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:45.658Z,1516724385.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:46.028Z,1516724386.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:46.048Z,1516724386.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:46.432Z,1516724386.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:46.461Z,1516724386.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:46.834Z,1516724386.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:46.856Z,1516724386.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:47.228Z,1516724387.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:47.249Z,1516724387.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:47.638Z,1516724387.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:47.672Z,1516724387.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:48.046Z,1516724388.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:48.061Z,1516724388.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:48.443Z,1516724388.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:48.458Z,1516724388.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:48.828Z,1516724388.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:48.853Z,1516724388.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:49.233Z,1516724389.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:49.249Z,1516724389.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:49.628Z,1516724389.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:49.660Z,1516724389.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:50.029Z,1516724390.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:50.052Z,1516724390.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:50.434Z,1516724390.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:50.449Z,1516724390.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:50.843Z,1516724390.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:50.858Z,1516724390.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:51.248Z,1516724391.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:51.262Z,1516724391.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:51.644Z,1516724391.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:51.659Z,1516724391.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:52.029Z,1516724392.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:52.052Z,1516724392.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:52.427Z,1516724392.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:52.460Z,1516724392.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:52.834Z,1516724392.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:52.849Z,1516724392.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:53.228Z,1516724393.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:53.253Z,1516724393.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:53.644Z,1516724393.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:53.659Z,1516724393.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:54.047Z,1516724394.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:54.068Z,1516724394.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:54.443Z,1516724394.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:54.458Z,1516724394.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:54.829Z,1516724394.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:54.851Z,1516724394.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:55.233Z,1516724395.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:55.253Z,1516724395.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:55.633Z,1516724395.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:55.653Z,1516724395.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:56.027Z,1516724396.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:56.061Z,1516724396.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:56.433Z,1516724396.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:56.448Z,1516724396.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:56.843Z,1516724396.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:56.858Z,1516724396.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:57.246Z,1516724397.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:57.261Z,1516724397.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:57.645Z,1516724397.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:57.659Z,1516724397.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:58.027Z,1516724398.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:58.061Z,1516724398.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:58.428Z,1516724398.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:58.451Z,1516724398.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:58.835Z,1516724398.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:58.849Z,1516724398.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:59.228Z,1516724399.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:59.253Z,1516724399.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:19:59.643Z,1516724399.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:19:59.658Z,1516724399.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:00.047Z,1516724400.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:00.061Z,1516724400.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:00.444Z,1516724400.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:00.459Z,1516724400.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:00.837Z,1516724400.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:00.857Z,1516724400.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:01.239Z,1516724401.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:01.254Z,1516724401.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:01.644Z,1516724401.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:01.665Z,1516724401.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:02.033Z,1516724402.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:02.054Z,1516724402.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:02.435Z,1516724402.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:02.450Z,1516724402.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:02.846Z,1516724402.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:02.861Z,1516724402.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:03.247Z,1516724403.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:03.268Z,1516724403.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:03.645Z,1516724403.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:03.660Z,1516724403.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:04.024Z,1516724404.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:04.054Z,1516724404.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:04.446Z,1516724404.446 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:04.469Z,1516724404.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:04.838Z,1516724404.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:04.854Z,1516724404.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:05.222Z,1516724405.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:05.254Z,1516724405.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:05.644Z,1516724405.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:05.660Z,1516724405.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:06.046Z,1516724406.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:06.077Z,1516724406.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:06.442Z,1516724406.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:06.467Z,1516724406.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:06.824Z,1516724406.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:06.857Z,1516724406.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:07.224Z,1516724407.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:07.260Z,1516724407.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:07.624Z,1516724407.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:07.651Z,1516724407.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:08.025Z,1516724408.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:08.057Z,1516724408.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:08.424Z,1516724408.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:08.452Z,1516724408.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:08.844Z,1516724408.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:08.859Z,1516724408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:09.244Z,1516724409.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:09.271Z,1516724409.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:09.634Z,1516724409.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:09.667Z,1516724409.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:10.024Z,1516724410.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:10.061Z,1516724410.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:10.424Z,1516724410.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:10.461Z,1516724410.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:10.825Z,1516724410.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:10.862Z,1516724410.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:11.222Z,1516724411.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:11.237Z,1516724411.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:11.635Z,1516724411.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:11.661Z,1516724411.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:12.039Z,1516724412.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:12.073Z,1516724412.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:12.435Z,1516724412.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:12.470Z,1516724412.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:12.828Z,1516724412.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:12.865Z,1516724412.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:13.224Z,1516724413.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:13.268Z,1516724413.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:13.628Z,1516724413.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:13.665Z,1516724413.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:14.033Z,1516724414.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:14.065Z,1516724414.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:14.424Z,1516724414.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:14.469Z,1516724414.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:14.836Z,1516724414.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:14.862Z,1516724414.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:15.239Z,1516724415.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:15.273Z,1516724415.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:15.635Z,1516724415.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:15.663Z,1516724415.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:16.022Z,1516724416.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:16.037Z,1516724416.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:16.424Z,1516724416.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:16.445Z,1516724416.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:16.833Z,1516724416.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:16.848Z,1516724416.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:17.226Z,1516724417.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:17.241Z,1516724417.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:17.648Z,1516724417.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:17.677Z,1516724417.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:18.059Z,1516724418.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:18.074Z,1516724418.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:18.439Z,1516724418.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:18.470Z,1516724418.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:18.832Z,1516724418.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:18.853Z,1516724418.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:19.233Z,1516724419.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:19.248Z,1516724419.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:19.628Z,1516724419.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:19.647Z,1516724419.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:20.030Z,1516724420.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:20.053Z,1516724420.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:20.433Z,1516724420.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:20.448Z,1516724420.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:20.836Z,1516724420.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:20.851Z,1516724420.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:21.239Z,1516724421.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:21.254Z,1516724421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:21.647Z,1516724421.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:21.678Z,1516724421.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:22.028Z,1516724422.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:22.055Z,1516724422.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:22.432Z,1516724422.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:22.447Z,1516724422.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:22.829Z,1516724422.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:22.852Z,1516724422.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:22.855Z,1516724422.855 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T16:20:22.855Z,1516724422.855 [Default:CheckIn:C.Wait] Stopped 2018-01-23T16:20:22.855Z,1516724422.855 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T16:20:22.855Z,1516724422.855 [Default:CheckIn:D] Running Loop=1 2018-01-23T16:20:23.232Z,1516724423.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:23.247Z,1516724423.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:23.250Z,1516724423.250 [Default:CheckIn:D] Stopped 2018-01-23T16:20:23.250Z,1516724423.250 [Default:CheckIn:E] Running Loop=1 2018-01-23T16:20:23.652Z,1516724423.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:23.682Z,1516724423.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:23.686Z,1516724423.686 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 782.519857 min 2018-01-23T16:20:23.686Z,1516724423.686 [Default:CheckIn:E] Stopped 2018-01-23T16:20:23.686Z,1516724423.686 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T16:20:23.686Z,1516724423.686 [Default:CheckIn] Stopped 2018-01-23T16:20:23.686Z,1516724423.686 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T16:20:23.687Z,1516724423.687 [Default:CheckIn](INFO): Running loop #77 2018-01-23T16:20:23.687Z,1516724423.687 [Default:CheckIn] Running Loop=77 2018-01-23T16:20:23.687Z,1516724423.687 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T16:20:23.687Z,1516724423.687 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T16:20:24.043Z,1516724424.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:24.058Z,1516724424.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:27.141Z,1516724427.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:27.156Z,1516724427.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:27.261Z,1516724427.261 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:27.293Z,1516724427.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:27.616Z,1516724427.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:27.643Z,1516724427.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:28.021Z,1516724428.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:28.057Z,1516724428.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:28.414Z,1516724428.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:28.437Z,1516724428.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:28.835Z,1516724428.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:28.854Z,1516724428.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:29.240Z,1516724429.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:29.255Z,1516724429.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:29.636Z,1516724429.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:29.651Z,1516724429.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:30.017Z,1516724430.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:30.053Z,1516724430.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:30.417Z,1516724430.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:30.450Z,1516724430.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:30.822Z,1516724430.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:30.848Z,1516724430.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:31.216Z,1516724431.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:31.253Z,1516724431.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:31.631Z,1516724431.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:31.660Z,1516724431.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:32.028Z,1516724432.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:32.054Z,1516724432.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:32.427Z,1516724432.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:32.465Z,1516724432.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:32.820Z,1516724432.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:32.862Z,1516724432.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:33.214Z,1516724433.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:33.229Z,1516724433.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:33.632Z,1516724433.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:33.657Z,1516724433.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:34.023Z,1516724434.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:34.037Z,1516724434.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:34.416Z,1516724434.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:34.445Z,1516724434.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:34.828Z,1516724434.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:34.843Z,1516724434.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:35.231Z,1516724435.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:35.246Z,1516724435.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:35.628Z,1516724435.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:35.643Z,1516724435.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:36.024Z,1516724436.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:36.039Z,1516724436.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:36.425Z,1516724436.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:36.444Z,1516724436.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:36.828Z,1516724436.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:36.843Z,1516724436.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:37.224Z,1516724437.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:37.239Z,1516724437.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:37.627Z,1516724437.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:37.643Z,1516724437.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:38.027Z,1516724438.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:38.042Z,1516724438.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:38.439Z,1516724438.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:38.475Z,1516724438.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:38.830Z,1516724438.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:38.844Z,1516724438.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:39.217Z,1516724439.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:39.244Z,1516724439.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:39.625Z,1516724439.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:39.645Z,1516724439.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:40.028Z,1516724440.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:40.043Z,1516724440.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:40.420Z,1516724440.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:40.451Z,1516724440.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:40.836Z,1516724440.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:40.851Z,1516724440.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:41.240Z,1516724441.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:41.255Z,1516724441.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:41.636Z,1516724441.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:41.652Z,1516724441.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:42.023Z,1516724442.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:42.056Z,1516724442.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:42.429Z,1516724442.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:42.445Z,1516724442.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:42.830Z,1516724442.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:42.847Z,1516724442.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:43.232Z,1516724443.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:43.253Z,1516724443.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:43.635Z,1516724443.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:43.652Z,1516724443.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:44.034Z,1516724444.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:44.050Z,1516724444.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:44.435Z,1516724444.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:44.449Z,1516724444.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:44.826Z,1516724444.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:44.841Z,1516724444.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:45.220Z,1516724445.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:45.243Z,1516724445.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:45.636Z,1516724445.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:45.664Z,1516724445.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:46.040Z,1516724446.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:46.054Z,1516724446.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:46.435Z,1516724446.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:46.450Z,1516724446.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:46.817Z,1516724446.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:46.849Z,1516724446.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:47.216Z,1516724447.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:47.250Z,1516724447.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:47.635Z,1516724447.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:47.651Z,1516724447.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:48.037Z,1516724448.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:48.056Z,1516724448.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:48.427Z,1516724448.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:48.454Z,1516724448.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:48.817Z,1516724448.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:48.848Z,1516724448.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:49.215Z,1516724449.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:49.253Z,1516724449.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:49.627Z,1516724449.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:49.663Z,1516724449.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:50.027Z,1516724450.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:50.054Z,1516724450.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:50.435Z,1516724450.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:50.459Z,1516724450.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:50.822Z,1516724450.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:50.840Z,1516724450.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:51.215Z,1516724451.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:51.249Z,1516724451.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:51.638Z,1516724451.638 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:51.653Z,1516724451.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:52.039Z,1516724452.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:52.054Z,1516724452.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:52.432Z,1516724452.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:52.459Z,1516724452.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:52.819Z,1516724452.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:52.846Z,1516724452.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:53.216Z,1516724453.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:53.254Z,1516724453.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:53.636Z,1516724453.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:53.651Z,1516724453.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:54.036Z,1516724454.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:54.054Z,1516724454.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:54.427Z,1516724454.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:54.454Z,1516724454.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:54.817Z,1516724454.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:54.849Z,1516724454.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:55.216Z,1516724455.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:55.253Z,1516724455.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:55.631Z,1516724455.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:55.659Z,1516724455.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:56.027Z,1516724456.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:56.058Z,1516724456.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:56.435Z,1516724456.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:56.459Z,1516724456.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:56.824Z,1516724456.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:56.862Z,1516724456.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:57.218Z,1516724457.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:57.233Z,1516724457.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:57.640Z,1516724457.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:57.669Z,1516724457.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:58.035Z,1516724458.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:58.061Z,1516724458.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:58.427Z,1516724458.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:58.442Z,1516724458.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:58.825Z,1516724458.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:58.840Z,1516724458.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:59.225Z,1516724459.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:59.240Z,1516724459.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:20:59.640Z,1516724459.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:20:59.670Z,1516724459.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:00.035Z,1516724460.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:00.050Z,1516724460.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:00.439Z,1516724460.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:00.454Z,1516724460.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:00.828Z,1516724460.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:00.849Z,1516724460.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:01.228Z,1516724461.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:01.249Z,1516724461.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:01.631Z,1516724461.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:01.657Z,1516724461.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:02.030Z,1516724462.030 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:02.049Z,1516724462.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:02.431Z,1516724462.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:02.446Z,1516724462.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:02.824Z,1516724462.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:02.843Z,1516724462.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:03.224Z,1516724463.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:03.239Z,1516724463.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:03.628Z,1516724463.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:03.667Z,1516724463.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:04.035Z,1516724464.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:04.050Z,1516724464.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:04.429Z,1516724464.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:04.445Z,1516724464.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:04.824Z,1516724464.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:04.842Z,1516724464.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:05.226Z,1516724465.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:05.249Z,1516724465.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:05.630Z,1516724465.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:05.653Z,1516724465.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:06.035Z,1516724466.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:06.050Z,1516724466.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:06.431Z,1516724466.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:06.446Z,1516724466.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:06.821Z,1516724466.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:06.848Z,1516724466.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:07.229Z,1516724467.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:07.244Z,1516724467.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:07.635Z,1516724467.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:07.661Z,1516724467.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:08.034Z,1516724468.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:08.049Z,1516724468.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:08.434Z,1516724468.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:08.449Z,1516724468.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:08.822Z,1516724468.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:08.853Z,1516724468.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:09.229Z,1516724469.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:09.244Z,1516724469.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:09.632Z,1516724469.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:09.656Z,1516724469.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:10.041Z,1516724470.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:10.056Z,1516724470.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:10.436Z,1516724470.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:10.451Z,1516724470.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:10.817Z,1516724470.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:10.844Z,1516724470.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:11.217Z,1516724471.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:11.253Z,1516724471.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:11.641Z,1516724471.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:11.656Z,1516724471.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:12.041Z,1516724472.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:12.064Z,1516724472.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:12.431Z,1516724472.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:12.465Z,1516724472.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:12.818Z,1516724472.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:12.832Z,1516724472.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:13.216Z,1516724473.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:13.237Z,1516724473.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:13.636Z,1516724473.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:13.673Z,1516724473.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:14.035Z,1516724474.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:14.058Z,1516724474.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:14.439Z,1516724474.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:14.462Z,1516724474.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:14.829Z,1516724474.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:14.865Z,1516724474.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:15.224Z,1516724475.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:15.245Z,1516724475.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:15.635Z,1516724475.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:15.666Z,1516724475.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:16.043Z,1516724476.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:16.070Z,1516724476.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:16.439Z,1516724476.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:16.463Z,1516724476.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:16.828Z,1516724476.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:16.843Z,1516724476.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:17.222Z,1516724477.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:17.245Z,1516724477.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:17.628Z,1516724477.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:17.643Z,1516724477.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:18.039Z,1516724478.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:18.054Z,1516724478.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:18.432Z,1516724478.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:18.447Z,1516724478.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:18.822Z,1516724478.822 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:18.844Z,1516724478.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:19.224Z,1516724479.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:19.246Z,1516724479.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:19.626Z,1516724479.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:19.674Z,1516724479.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:20.035Z,1516724480.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:20.050Z,1516724480.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:20.434Z,1516724480.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:20.450Z,1516724480.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:20.835Z,1516724480.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:20.857Z,1516724480.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:21.223Z,1516724481.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:21.245Z,1516724481.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:21.623Z,1516724481.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:21.645Z,1516724481.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:22.034Z,1516724482.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:22.049Z,1516724482.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:22.420Z,1516724482.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:22.443Z,1516724482.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:22.834Z,1516724482.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:22.850Z,1516724482.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:23.238Z,1516724483.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:23.257Z,1516724483.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:23.635Z,1516724483.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:23.650Z,1516724483.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:24.023Z,1516724484.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:24.044Z,1516724484.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:24.426Z,1516724484.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:24.449Z,1516724484.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:27.520Z,1516724487.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:27.536Z,1516724487.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:27.645Z,1516724487.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:27.689Z,1516724487.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:27.991Z,1516724487.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:28.006Z,1516724488.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:28.395Z,1516724488.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:28.416Z,1516724488.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:28.790Z,1516724488.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:28.805Z,1516724488.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:29.185Z,1516724489.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:29.200Z,1516724489.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:29.583Z,1516724489.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:29.609Z,1516724489.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:29.988Z,1516724489.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:30.009Z,1516724490.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:30.384Z,1516724490.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:30.399Z,1516724490.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:30.790Z,1516724490.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:30.812Z,1516724490.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:31.190Z,1516724491.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:31.209Z,1516724491.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:31.592Z,1516724491.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:31.607Z,1516724491.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:31.985Z,1516724491.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:31.000Z,1516724492.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:32.390Z,1516724492.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:32.405Z,1516724492.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:32.784Z,1516724492.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:32.799Z,1516724492.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:33.180Z,1516724493.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:33.215Z,1516724493.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:33.584Z,1516724493.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:33.599Z,1516724493.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:33.994Z,1516724493.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:34.013Z,1516724494.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:34.394Z,1516724494.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:34.416Z,1516724494.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:34.792Z,1516724494.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:34.815Z,1516724494.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:35.180Z,1516724495.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:35.202Z,1516724495.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:35.581Z,1516724495.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:35.617Z,1516724495.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:35.989Z,1516724495.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:36.005Z,1516724496.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:36.380Z,1516724496.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:36.402Z,1516724496.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:36.796Z,1516724496.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:36.810Z,1516724496.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:37.195Z,1516724497.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:37.210Z,1516724497.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:37.595Z,1516724497.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:37.610Z,1516724497.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:37.981Z,1516724497.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:38.013Z,1516724498.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:38.374Z,1516724498.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:38.406Z,1516724498.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:38.777Z,1516724498.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:38.802Z,1516724498.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:39.176Z,1516724499.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:39.213Z,1516724499.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:39.581Z,1516724499.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:39.607Z,1516724499.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:39.992Z,1516724499.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:40.014Z,1516724500.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:40.400Z,1516724500.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:40.415Z,1516724500.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:40.792Z,1516724500.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:40.814Z,1516724500.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:41.177Z,1516724501.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:41.209Z,1516724501.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:41.581Z,1516724501.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:41.614Z,1516724501.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:41.978Z,1516724501.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:42.005Z,1516724502.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:42.377Z,1516724502.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:42.413Z,1516724502.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:42.791Z,1516724502.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:42.820Z,1516724502.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:43.191Z,1516724503.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:43.217Z,1516724503.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:43.608Z,1516724503.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:43.623Z,1516724503.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:43.977Z,1516724503.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:43.997Z,1516724503.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:44.382Z,1516724504.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:44.397Z,1516724504.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:44.785Z,1516724504.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:44.805Z,1516724504.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:45.186Z,1516724505.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:45.205Z,1516724505.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:45.583Z,1516724505.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:45.603Z,1516724505.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:45.988Z,1516724505.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:46.003Z,1516724506.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:46.392Z,1516724506.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:46.407Z,1516724506.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:46.800Z,1516724506.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:46.835Z,1516724506.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:47.189Z,1516724507.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:47.204Z,1516724507.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:47.584Z,1516724507.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:47.605Z,1516724507.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:47.984Z,1516724507.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:48.003Z,1516724508.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:48.385Z,1516724508.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:48.400Z,1516724508.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:48.791Z,1516724508.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:48.806Z,1516724508.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:49.191Z,1516724509.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:49.206Z,1516724509.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:49.588Z,1516724509.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:49.607Z,1516724509.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:49.981Z,1516724509.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:50.013Z,1516724510.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:50.388Z,1516724510.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:50.407Z,1516724510.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:50.784Z,1516724510.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:50.811Z,1516724510.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:51.178Z,1516724511.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:51.209Z,1516724511.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:51.581Z,1516724511.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:51.608Z,1516724511.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:51.992Z,1516724511.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:52.023Z,1516724512.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:52.398Z,1516724512.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:52.422Z,1516724512.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:52.797Z,1516724512.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:52.812Z,1516724512.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:53.176Z,1516724513.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:53.213Z,1516724513.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:53.580Z,1516724513.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:53.615Z,1516724513.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:53.982Z,1516724513.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:54.017Z,1516724514.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:54.381Z,1516724514.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:54.397Z,1516724514.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:54.795Z,1516724514.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:54.821Z,1516724514.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:55.192Z,1516724515.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:55.219Z,1516724515.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:55.595Z,1516724515.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:55.626Z,1516724515.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:55.985Z,1516724515.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:55.000Z,1516724516.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:56.381Z,1516724516.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:56.409Z,1516724516.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:56.786Z,1516724516.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:56.801Z,1516724516.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:57.186Z,1516724517.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:57.201Z,1516724517.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:57.584Z,1516724517.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:57.600Z,1516724517.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:57.988Z,1516724517.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:58.027Z,1516724518.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:58.391Z,1516724518.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:58.407Z,1516724518.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:58.792Z,1516724518.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:58.808Z,1516724518.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:59.184Z,1516724519.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:59.199Z,1516724519.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:59.583Z,1516724519.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:21:59.609Z,1516724519.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:21:59.988Z,1516724519.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:00.009Z,1516724520.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:00.388Z,1516724520.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:00.403Z,1516724520.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:00.790Z,1516724520.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:00.805Z,1516724520.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:01.191Z,1516724521.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:01.206Z,1516724521.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:01.590Z,1516724521.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:01.609Z,1516724521.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:01.611Z,1516724521.611 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:01.611Z,1516724521.611 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 261 2018-01-23T16:22:01.611Z,1516724521.611 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:22:01.648Z,1516724521.648 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:22:01.983Z,1516724521.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:02.016Z,1516724522.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:02.041Z,1516724522.041 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:22:02.041Z,1516724522.041 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 261 2018-01-23T16:22:02.380Z,1516724522.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:02.403Z,1516724522.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:02.404Z,1516724522.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:22:02.405Z,1516724522.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:22:02.405Z,1516724522.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:22:02.779Z,1516724522.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:02.810Z,1516724522.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:03.186Z,1516724523.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:03.201Z,1516724523.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:03.580Z,1516724523.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:03.602Z,1516724523.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:03.995Z,1516724523.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:04.010Z,1516724524.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:04.398Z,1516724524.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:04.420Z,1516724524.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:04.795Z,1516724524.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:04.810Z,1516724524.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:05.183Z,1516724525.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:05.213Z,1516724525.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:05.589Z,1516724525.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:05.604Z,1516724525.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:05.990Z,1516724525.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:06.005Z,1516724526.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:06.379Z,1516724526.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:06.411Z,1516724526.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:06.796Z,1516724526.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:06.811Z,1516724526.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:07.198Z,1516724527.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:07.213Z,1516724527.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:07.595Z,1516724527.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:07.610Z,1516724527.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:07.986Z,1516724527.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:08.001Z,1516724528.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:08.380Z,1516724528.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:08.403Z,1516724528.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:08.779Z,1516724528.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:08.811Z,1516724528.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:09.186Z,1516724529.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:09.201Z,1516724529.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:09.580Z,1516724529.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:09.603Z,1516724529.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:09.995Z,1516724529.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:10.010Z,1516724530.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:10.399Z,1516724530.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:10.414Z,1516724530.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:10.795Z,1516724530.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:10.810Z,1516724530.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:11.180Z,1516724531.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:11.203Z,1516724531.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:11.586Z,1516724531.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:11.601Z,1516724531.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:11.981Z,1516724531.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:12.004Z,1516724532.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:12.384Z,1516724532.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:12.402Z,1516724532.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:12.796Z,1516724532.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:12.811Z,1516724532.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:13.199Z,1516724533.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:13.214Z,1516724533.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:13.595Z,1516724533.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:13.610Z,1516724533.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:13.976Z,1516724533.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:14.012Z,1516724534.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:14.388Z,1516724534.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:14.413Z,1516724534.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:14.776Z,1516724534.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:14.809Z,1516724534.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:14.809Z,1516724534.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 261 2018-01-23T16:22:14.809Z,1516724534.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:22:14.811Z,1516724534.811 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:14.811Z,1516724534.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 261 2018-01-23T16:22:14.811Z,1516724534.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:22:14.823Z,1516724534.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:22:14.824Z,1516724534.824 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:22:15.177Z,1516724535.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:15.224Z,1516724535.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:22:15.225Z,1516724535.225 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 261 2018-01-23T16:22:15.225Z,1516724535.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:22:15.225Z,1516724535.225 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 261 2018-01-23T16:22:15.576Z,1516724535.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:15.608Z,1516724535.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:22:15.608Z,1516724535.608 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:22:15.609Z,1516724535.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:22:15.609Z,1516724535.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:22:15.609Z,1516724535.609 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:22:15.610Z,1516724535.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:22:15.991Z,1516724535.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:16.014Z,1516724536.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:22:16.015Z,1516724536.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:16.400Z,1516724536.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:16.414Z,1516724536.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:22:16.415Z,1516724536.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:16.795Z,1516724536.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:16.816Z,1516724536.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:22:16.817Z,1516724536.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:17.176Z,1516724537.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:17.209Z,1516724537.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:22:17.210Z,1516724537.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:17.580Z,1516724537.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:17.614Z,1516724537.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:22:17.615Z,1516724537.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:17.981Z,1516724537.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:18.016Z,1516724538.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:22:18.017Z,1516724538.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:18.376Z,1516724538.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:18.413Z,1516724538.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:22:18.414Z,1516724538.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:18.787Z,1516724538.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:18.822Z,1516724538.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:22:18.823Z,1516724538.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:19.203Z,1516724539.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:19.218Z,1516724539.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:22:19.219Z,1516724539.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:19.588Z,1516724539.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:19.620Z,1516724539.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:22:19.621Z,1516724539.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:19.976Z,1516724539.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:20.014Z,1516724540.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:22:20.015Z,1516724540.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:20.380Z,1516724540.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:20.413Z,1516724540.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:22:20.414Z,1516724540.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:20.776Z,1516724540.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:20.812Z,1516724540.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:22:20.813Z,1516724540.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:21.177Z,1516724541.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:21.214Z,1516724541.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:22:21.215Z,1516724541.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:21.580Z,1516724541.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:21.613Z,1516724541.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:22:21.614Z,1516724541.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:22.004Z,1516724542.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:22.018Z,1516724542.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:22:22.019Z,1516724542.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:22.399Z,1516724542.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:22.424Z,1516724542.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:22:22.425Z,1516724542.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:22.788Z,1516724542.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:22.822Z,1516724542.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:22:22.824Z,1516724542.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:23.177Z,1516724543.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:23.213Z,1516724543.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:22:23.214Z,1516724543.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:23.577Z,1516724543.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:23.614Z,1516724543.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:22:23.615Z,1516724543.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:23.986Z,1516724543.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:24.012Z,1516724544.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:22:24.013Z,1516724544.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:24.376Z,1516724544.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:24.413Z,1516724544.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:22:24.413Z,1516724544.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:24.788Z,1516724544.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:24.822Z,1516724544.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:22:24.823Z,1516724544.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:27.887Z,1516724547.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:27.916Z,1516724547.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T16:22:27.917Z,1516724547.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:28.032Z,1516724548.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:28.056Z,1516724548.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:22:28.057Z,1516724548.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:28.377Z,1516724548.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:28.412Z,1516724548.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:22:28.413Z,1516724548.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:28.775Z,1516724548.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:28.816Z,1516724548.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:22:28.817Z,1516724548.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:29.174Z,1516724549.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:29.189Z,1516724549.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:22:29.190Z,1516724549.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:29.577Z,1516724549.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:29.591Z,1516724549.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:22:29.592Z,1516724549.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:29.976Z,1516724549.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:29.991Z,1516724549.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:22:29.992Z,1516724549.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:30.379Z,1516724550.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:30.394Z,1516724550.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:22:30.395Z,1516724550.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:30.784Z,1516724550.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:30.798Z,1516724550.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:22:30.799Z,1516724550.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:31.173Z,1516724551.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:31.196Z,1516724551.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:22:31.197Z,1516724551.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:31.580Z,1516724551.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:31.595Z,1516724551.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:22:31.596Z,1516724551.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:31.985Z,1516724551.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:31.000Z,1516724552.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:22:32.001Z,1516724552.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:32.381Z,1516724552.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:32.396Z,1516724552.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:22:32.397Z,1516724552.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:32.783Z,1516724552.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:32.799Z,1516724552.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:22:32.800Z,1516724552.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:33.183Z,1516724553.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:33.197Z,1516724553.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:22:33.198Z,1516724553.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:33.582Z,1516724553.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:33.597Z,1516724553.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:22:33.597Z,1516724553.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:33.976Z,1516724553.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:33.991Z,1516724553.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:22:33.992Z,1516724553.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:34.386Z,1516724554.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:34.401Z,1516724554.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:22:34.401Z,1516724554.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:34.783Z,1516724554.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:34.798Z,1516724554.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:22:34.799Z,1516724554.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:35.188Z,1516724555.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:35.203Z,1516724555.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:35.584Z,1516724555.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:35.598Z,1516724555.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:35.981Z,1516724555.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:35.997Z,1516724555.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:36.376Z,1516724556.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:36.392Z,1516724556.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:36.790Z,1516724556.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:36.806Z,1516724556.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:37.180Z,1516724557.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:37.203Z,1516724557.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:37.591Z,1516724557.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:37.607Z,1516724557.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:37.986Z,1516724557.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:38.001Z,1516724558.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:38.362Z,1516724558.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:38.400Z,1516724558.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:38.784Z,1516724558.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:38.800Z,1516724558.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:39.188Z,1516724559.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:39.205Z,1516724559.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:39.587Z,1516724559.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:39.603Z,1516724559.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:39.965Z,1516724559.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:40.001Z,1516724560.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:40.367Z,1516724560.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:40.395Z,1516724560.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:40.787Z,1516724560.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:40.803Z,1516724560.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:41.189Z,1516724561.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:41.208Z,1516724561.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:41.587Z,1516724561.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:41.605Z,1516724561.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:41.968Z,1516724561.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:41.000Z,1516724562.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:42.371Z,1516724562.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:42.398Z,1516724562.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:42.789Z,1516724562.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:42.803Z,1516724562.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:43.177Z,1516724563.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:43.205Z,1516724563.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:43.581Z,1516724563.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:43.608Z,1516724563.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:43.967Z,1516724563.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:44.005Z,1516724564.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:44.368Z,1516724564.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:44.405Z,1516724564.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:44.776Z,1516724564.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:44.805Z,1516724564.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:45.194Z,1516724565.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:45.209Z,1516724565.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:45.575Z,1516724565.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:45.603Z,1516724565.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:45.967Z,1516724565.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:45.982Z,1516724565.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:46.368Z,1516724566.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:46.405Z,1516724566.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:46.781Z,1516724566.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:46.808Z,1516724566.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:47.180Z,1516724567.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:47.213Z,1516724567.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:47.579Z,1516724567.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:47.613Z,1516724567.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:47.965Z,1516724567.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:48.016Z,1516724568.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:48.364Z,1516724568.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:48.383Z,1516724568.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:48.784Z,1516724568.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:48.810Z,1516724568.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:49.179Z,1516724569.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:49.210Z,1516724569.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:49.579Z,1516724569.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:49.620Z,1516724569.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:49.979Z,1516724569.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:49.987Z,1516724569.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x35250 got:0x62515 2018-01-23T16:22:50.015Z,1516724570.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:50.374Z,1516724570.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:50.389Z,1516724570.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:50.779Z,1516724570.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:50.794Z,1516724570.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:51.179Z,1516724571.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:51.213Z,1516724571.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:51.589Z,1516724571.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:51.597Z,1516724571.597 [PNI_TCM](ERROR): CRC does not match. Expected:0x37626 got:0x2212 2018-01-23T16:22:51.618Z,1516724571.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:51.972Z,1516724571.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:52.003Z,1516724572.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:52.376Z,1516724572.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:52.391Z,1516724572.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:52.788Z,1516724572.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:52.815Z,1516724572.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:53.181Z,1516724573.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:53.197Z,1516724573.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:53.578Z,1516724573.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:53.592Z,1516724573.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:53.969Z,1516724573.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:53.997Z,1516724573.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:54.376Z,1516724574.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:54.414Z,1516724574.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:54.773Z,1516724574.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:54.796Z,1516724574.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:55.180Z,1516724575.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:55.195Z,1516724575.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:55.581Z,1516724575.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:55.601Z,1516724575.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:55.980Z,1516724575.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:56.019Z,1516724576.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:56.370Z,1516724576.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:56.389Z,1516724576.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:56.772Z,1516724576.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:56.790Z,1516724576.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:57.173Z,1516724577.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:57.199Z,1516724577.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:57.564Z,1516724577.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:57.609Z,1516724577.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:57.987Z,1516724577.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:58.005Z,1516724578.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:58.391Z,1516724578.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:58.406Z,1516724578.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:58.786Z,1516724578.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:58.802Z,1516724578.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:59.164Z,1516724579.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:59.208Z,1516724579.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:59.579Z,1516724579.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:22:59.598Z,1516724579.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:22:59.962Z,1516724579.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:00.001Z,1516724580.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:00.365Z,1516724580.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:00.396Z,1516724580.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:00.765Z,1516724580.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:00.802Z,1516724580.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:01.175Z,1516724581.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:01.207Z,1516724581.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:01.588Z,1516724581.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:01.610Z,1516724581.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:01.978Z,1516724581.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:02.015Z,1516724582.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:02.362Z,1516724582.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:02.409Z,1516724582.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:02.764Z,1516724582.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:02.805Z,1516724582.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:03.165Z,1516724583.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:03.197Z,1516724583.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:03.564Z,1516724583.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:03.607Z,1516724583.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:03.975Z,1516724583.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:04.014Z,1516724584.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:04.388Z,1516724584.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:04.425Z,1516724584.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:04.783Z,1516724584.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:04.813Z,1516724584.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:05.174Z,1516724585.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:05.213Z,1516724585.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:05.577Z,1516724585.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:05.616Z,1516724585.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:05.973Z,1516724585.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:06.013Z,1516724586.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:06.373Z,1516724586.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:06.390Z,1516724586.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:06.774Z,1516724586.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:06.793Z,1516724586.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:07.188Z,1516724587.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:07.223Z,1516724587.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:07.579Z,1516724587.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:07.602Z,1516724587.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:07.983Z,1516724587.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:08.002Z,1516724588.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:08.375Z,1516724588.375 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:08.394Z,1516724588.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:08.772Z,1516724588.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:08.792Z,1516724588.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:09.169Z,1516724589.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:09.197Z,1516724589.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:09.568Z,1516724589.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:09.602Z,1516724589.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:09.991Z,1516724589.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:10.007Z,1516724590.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:10.390Z,1516724590.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:10.431Z,1516724590.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:10.788Z,1516724590.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:10.803Z,1516724590.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:11.165Z,1516724591.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:11.192Z,1516724591.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:11.565Z,1516724591.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:11.601Z,1516724591.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:11.965Z,1516724591.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:11.998Z,1516724591.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:12.374Z,1516724592.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:12.406Z,1516724592.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:12.765Z,1516724592.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:12.807Z,1516724592.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:13.184Z,1516724593.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:13.221Z,1516724593.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:13.580Z,1516724593.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:13.623Z,1516724593.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:13.978Z,1516724593.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:13.994Z,1516724593.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:14.372Z,1516724594.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:14.388Z,1516724594.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:14.772Z,1516724594.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:14.788Z,1516724594.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:15.172Z,1516724595.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:15.192Z,1516724595.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:15.572Z,1516724595.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:15.587Z,1516724595.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:15.982Z,1516724595.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:15.997Z,1516724595.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:16.383Z,1516724596.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:16.401Z,1516724596.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:16.782Z,1516724596.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:16.798Z,1516724596.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:17.172Z,1516724597.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:17.187Z,1516724597.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:17.568Z,1516724597.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:17.594Z,1516724597.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:17.964Z,1516724597.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:18.003Z,1516724598.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:18.369Z,1516724598.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:18.411Z,1516724598.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:18.765Z,1516724598.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:18.791Z,1516724598.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:19.180Z,1516724599.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:19.202Z,1516724599.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:19.587Z,1516724599.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:19.605Z,1516724599.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:19.984Z,1516724599.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:19.999Z,1516724599.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:20.364Z,1516724600.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:20.401Z,1516724600.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:20.768Z,1516724600.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:20.794Z,1516724600.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:21.165Z,1516724601.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:21.201Z,1516724601.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:21.564Z,1516724601.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:21.601Z,1516724601.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:21.975Z,1516724601.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:22.009Z,1516724602.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:22.396Z,1516724602.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:22.411Z,1516724602.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:22.775Z,1516724602.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:22.819Z,1516724602.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:23.169Z,1516724603.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:23.184Z,1516724603.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:23.573Z,1516724603.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:23.609Z,1516724603.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:23.973Z,1516724603.973 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:23.989Z,1516724603.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:24.371Z,1516724604.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:24.386Z,1516724604.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:24.773Z,1516724604.773 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:24.793Z,1516724604.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:25.188Z,1516724605.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:25.222Z,1516724605.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:28.275Z,1516724608.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:28.291Z,1516724608.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:28.418Z,1516724608.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:28.453Z,1516724608.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:28.752Z,1516724608.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:28.778Z,1516724608.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:29.153Z,1516724609.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:29.186Z,1516724609.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:29.552Z,1516724609.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:29.578Z,1516724609.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:29.967Z,1516724609.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:29.982Z,1516724609.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:30.372Z,1516724610.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:30.386Z,1516724610.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:30.767Z,1516724610.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:30.782Z,1516724610.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:31.147Z,1516724611.147 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:31.181Z,1516724611.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:31.548Z,1516724611.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:31.586Z,1516724611.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:31.952Z,1516724611.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:31.978Z,1516724611.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:32.350Z,1516724612.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:32.380Z,1516724612.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:32.748Z,1516724612.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:32.786Z,1516724612.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:33.172Z,1516724613.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:33.186Z,1516724613.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:33.569Z,1516724613.569 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:33.596Z,1516724613.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:33.959Z,1516724613.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:33.987Z,1516724613.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:34.356Z,1516724614.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:34.388Z,1516724614.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:34.748Z,1516724614.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:34.789Z,1516724614.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:35.153Z,1516724615.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:35.168Z,1516724615.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:35.552Z,1516724615.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:35.589Z,1516724615.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:35.968Z,1516724615.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:35.993Z,1516724615.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:36.367Z,1516724616.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:36.394Z,1516724616.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:36.771Z,1516724616.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:36.798Z,1516724616.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:37.160Z,1516724617.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:37.196Z,1516724617.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:37.552Z,1516724617.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:37.567Z,1516724617.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:37.960Z,1516724617.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:37.997Z,1516724617.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:38.354Z,1516724618.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:38.369Z,1516724618.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:38.757Z,1516724618.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:38.771Z,1516724618.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:39.163Z,1516724619.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:39.178Z,1516724619.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:39.571Z,1516724619.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:39.602Z,1516724619.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:39.960Z,1516724619.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:39.974Z,1516724619.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:40.355Z,1516724620.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:40.376Z,1516724620.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:40.756Z,1516724620.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:40.771Z,1516724620.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:41.157Z,1516724621.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:41.176Z,1516724621.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:41.554Z,1516724621.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:41.577Z,1516724621.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:41.963Z,1516724621.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:41.979Z,1516724621.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:42.363Z,1516724622.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:42.378Z,1516724622.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:42.762Z,1516724622.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:42.781Z,1516724622.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:43.157Z,1516724623.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:43.172Z,1516724623.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:43.558Z,1516724623.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:43.573Z,1516724623.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:43.962Z,1516724623.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:43.977Z,1516724623.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:44.352Z,1516724624.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:44.374Z,1516724624.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:44.757Z,1516724624.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:44.772Z,1516724624.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:45.167Z,1516724625.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:45.182Z,1516724625.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:45.571Z,1516724625.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:45.586Z,1516724625.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:45.969Z,1516724625.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:45.984Z,1516724625.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:46.351Z,1516724626.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:46.374Z,1516724626.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:46.753Z,1516724626.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:46.776Z,1516724626.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:47.159Z,1516724627.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:47.186Z,1516724627.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:47.562Z,1516724627.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:47.577Z,1516724627.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:47.970Z,1516724627.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:47.985Z,1516724627.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:48.371Z,1516724628.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:48.386Z,1516724628.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:48.768Z,1516724628.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:48.783Z,1516724628.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:49.158Z,1516724629.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:49.173Z,1516724629.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:49.555Z,1516724629.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:49.588Z,1516724629.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:49.946Z,1516724629.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:49.974Z,1516724629.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:50.351Z,1516724630.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:50.385Z,1516724630.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:50.757Z,1516724630.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:50.772Z,1516724630.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:51.167Z,1516724631.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:51.189Z,1516724631.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:51.570Z,1516724631.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:51.585Z,1516724631.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:51.968Z,1516724631.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:51.983Z,1516724631.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:52.351Z,1516724632.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:52.374Z,1516724632.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:52.751Z,1516724632.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:52.782Z,1516724632.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:53.158Z,1516724633.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:53.172Z,1516724633.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:53.552Z,1516724633.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:53.574Z,1516724633.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:53.970Z,1516724633.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:53.989Z,1516724633.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:54.370Z,1516724634.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:54.385Z,1516724634.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:54.767Z,1516724634.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:54.782Z,1516724634.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:55.155Z,1516724635.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:55.175Z,1516724635.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:55.558Z,1516724635.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:55.580Z,1516724635.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:55.952Z,1516724635.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:55.975Z,1516724635.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:56.353Z,1516724636.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:56.376Z,1516724636.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:56.757Z,1516724636.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:56.776Z,1516724636.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:57.166Z,1516724637.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:57.182Z,1516724637.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:57.570Z,1516724637.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:57.589Z,1516724637.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:57.971Z,1516724637.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:57.985Z,1516724637.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:58.346Z,1516724638.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:58.378Z,1516724638.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:58.759Z,1516724638.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:58.774Z,1516724638.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:59.149Z,1516724639.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:59.185Z,1516724639.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:59.547Z,1516724639.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:59.581Z,1516724639.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:23:59.968Z,1516724639.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:23:59.982Z,1516724639.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:00.372Z,1516724640.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:00.386Z,1516724640.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:00.767Z,1516724640.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:00.782Z,1516724640.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:01.148Z,1516724641.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:01.185Z,1516724641.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:01.548Z,1516724641.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:01.587Z,1516724641.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:01.948Z,1516724641.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:01.985Z,1516724641.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:02.350Z,1516724642.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:02.365Z,1516724642.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:02.751Z,1516724642.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:02.766Z,1516724642.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:03.163Z,1516724643.163 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:03.194Z,1516724643.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:03.571Z,1516724643.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:03.596Z,1516724643.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:03.971Z,1516724643.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:03.997Z,1516724643.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:04.349Z,1516724644.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:04.369Z,1516724644.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:04.753Z,1516724644.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:04.768Z,1516724644.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:05.161Z,1516724645.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:05.176Z,1516724645.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:05.556Z,1516724645.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:05.577Z,1516724645.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:05.971Z,1516724645.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:06.002Z,1516724646.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:06.367Z,1516724646.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:06.382Z,1516724646.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:06.771Z,1516724646.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:06.786Z,1516724646.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:07.160Z,1516724647.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:07.175Z,1516724647.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:07.557Z,1516724647.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:07.572Z,1516724647.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:07.952Z,1516724647.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:07.979Z,1516724647.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:08.355Z,1516724648.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:08.375Z,1516724648.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:08.758Z,1516724648.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:08.780Z,1516724648.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:09.166Z,1516724649.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:09.181Z,1516724649.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:09.570Z,1516724649.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:09.589Z,1516724649.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:09.967Z,1516724649.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:09.982Z,1516724649.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:10.346Z,1516724650.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:10.374Z,1516724650.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:10.760Z,1516724650.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:10.778Z,1516724650.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:11.149Z,1516724651.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:11.185Z,1516724651.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:11.548Z,1516724651.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:11.581Z,1516724651.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:11.964Z,1516724651.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:11.991Z,1516724651.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:12.372Z,1516724652.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:12.386Z,1516724652.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:12.767Z,1516724652.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:12.782Z,1516724652.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:13.149Z,1516724653.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:13.176Z,1516724653.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:13.552Z,1516724653.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:13.587Z,1516724653.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:13.959Z,1516724653.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:13.994Z,1516724653.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:14.371Z,1516724654.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:14.389Z,1516724654.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:14.759Z,1516724654.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:14.789Z,1516724654.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:15.153Z,1516724655.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:15.185Z,1516724655.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:15.547Z,1516724655.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:15.585Z,1516724655.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:15.959Z,1516724655.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:15.999Z,1516724655.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:16.359Z,1516724656.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:16.397Z,1516724656.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:16.763Z,1516724656.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:16.790Z,1516724656.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:17.150Z,1516724657.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:17.193Z,1516724657.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:17.553Z,1516724657.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:17.584Z,1516724657.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:17.960Z,1516724657.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:17.993Z,1516724657.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:18.363Z,1516724658.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:18.392Z,1516724658.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:18.760Z,1516724658.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:18.795Z,1516724658.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:19.154Z,1516724659.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:19.169Z,1516724659.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:19.561Z,1516724659.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:19.575Z,1516724659.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:19.968Z,1516724659.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:19.995Z,1516724659.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:20.363Z,1516724660.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:20.385Z,1516724660.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:20.763Z,1516724660.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:20.784Z,1516724660.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:21.159Z,1516724661.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:21.174Z,1516724661.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:21.556Z,1516724661.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:21.571Z,1516724661.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:21.962Z,1516724661.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:21.985Z,1516724661.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:22.360Z,1516724662.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:22.388Z,1516724662.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:22.766Z,1516724662.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:22.781Z,1516724662.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:23.158Z,1516724663.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:23.173Z,1516724663.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:23.552Z,1516724663.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:23.585Z,1516724663.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:23.971Z,1516724663.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:23.986Z,1516724663.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:24.371Z,1516724664.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:24.385Z,1516724664.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:24.772Z,1516724664.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:24.787Z,1516724664.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:25.166Z,1516724665.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:25.181Z,1516724665.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:25.559Z,1516724665.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:25.574Z,1516724665.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:28.684Z,1516724668.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:28.719Z,1516724668.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:28.824Z,1516724668.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:28.863Z,1516724668.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:29.191Z,1516724669.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:29.223Z,1516724669.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:29.594Z,1516724669.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:29.630Z,1516724669.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:29.993Z,1516724669.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:30.024Z,1516724670.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:30.394Z,1516724670.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:30.409Z,1516724670.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:30.786Z,1516724670.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:30.802Z,1516724670.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:31.200Z,1516724671.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:31.231Z,1516724671.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:31.600Z,1516724671.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:31.614Z,1516724671.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:31.992Z,1516724671.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:32.007Z,1516724672.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:32.391Z,1516724672.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:32.417Z,1516724672.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:32.793Z,1516724672.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:32.809Z,1516724672.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:33.193Z,1516724673.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:33.214Z,1516724673.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:33.251Z,1516724673.251 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:24:33.588Z,1516724673.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:33.609Z,1516724673.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:33.999Z,1516724673.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:34.014Z,1516724674.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:34.394Z,1516724674.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:34.413Z,1516724674.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:34.798Z,1516724674.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:34.821Z,1516724674.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:35.190Z,1516724675.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:35.205Z,1516724675.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:35.584Z,1516724675.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:35.615Z,1516724675.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:35.999Z,1516724675.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:36.014Z,1516724676.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:36.402Z,1516724676.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:36.417Z,1516724676.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:36.798Z,1516724676.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:36.814Z,1516724676.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:37.187Z,1516724677.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:37.207Z,1516724677.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:37.590Z,1516724677.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:37.612Z,1516724677.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:37.998Z,1516724677.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:38.014Z,1516724678.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:38.402Z,1516724678.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:38.417Z,1516724678.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:38.800Z,1516724678.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:38.814Z,1516724678.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:39.185Z,1516724679.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:39.208Z,1516724679.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:39.584Z,1516724679.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:39.606Z,1516724679.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:39.999Z,1516724679.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:40.014Z,1516724680.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:40.398Z,1516724680.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:40.413Z,1516724680.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:40.798Z,1516724680.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:40.813Z,1516724680.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:41.190Z,1516724681.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:41.205Z,1516724681.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:41.584Z,1516724681.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:41.606Z,1516724681.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:41.998Z,1516724681.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:42.013Z,1516724682.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:42.402Z,1516724682.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:42.417Z,1516724682.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:42.802Z,1516724682.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:42.817Z,1516724682.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:43.185Z,1516724683.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:43.207Z,1516724683.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:43.590Z,1516724683.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:43.612Z,1516724683.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:43.998Z,1516724683.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:44.014Z,1516724684.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:44.402Z,1516724684.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:44.421Z,1516724684.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:44.800Z,1516724684.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:44.814Z,1516724684.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:45.185Z,1516724685.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:45.208Z,1516724685.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:45.584Z,1516724685.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:45.606Z,1516724685.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:45.000Z,1516724686.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:46.015Z,1516724686.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:46.398Z,1516724686.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:46.413Z,1516724686.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:46.798Z,1516724686.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:46.813Z,1516724686.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:47.190Z,1516724687.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:47.208Z,1516724687.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:47.592Z,1516724687.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:47.613Z,1516724687.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:47.998Z,1516724687.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:48.013Z,1516724688.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:48.402Z,1516724688.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:48.425Z,1516724688.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:48.798Z,1516724688.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:48.813Z,1516724688.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:49.188Z,1516724689.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:49.207Z,1516724689.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:49.589Z,1516724689.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:49.608Z,1516724689.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:49.998Z,1516724689.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:50.014Z,1516724690.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:50.402Z,1516724690.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:50.421Z,1516724690.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:50.803Z,1516724690.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:50.825Z,1516724690.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:51.193Z,1516724691.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:51.208Z,1516724691.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:51.587Z,1516724691.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:51.608Z,1516724691.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:51.998Z,1516724691.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:52.020Z,1516724692.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:52.402Z,1516724692.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:52.417Z,1516724692.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:52.798Z,1516724692.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:52.813Z,1516724692.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:53.188Z,1516724693.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:53.209Z,1516724693.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:53.595Z,1516724693.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:53.610Z,1516724693.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:53.998Z,1516724693.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:54.013Z,1516724694.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:54.400Z,1516724694.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:54.427Z,1516724694.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:54.798Z,1516724694.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:54.814Z,1516724694.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:55.181Z,1516724695.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:55.216Z,1516724695.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:55.581Z,1516724695.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:55.617Z,1516724695.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:55.998Z,1516724695.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:56.021Z,1516724696.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:56.407Z,1516724696.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:56.422Z,1516724696.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:56.808Z,1516724696.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:56.823Z,1516724696.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:57.182Z,1516724697.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:57.208Z,1516724697.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:57.581Z,1516724697.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:57.613Z,1516724697.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:57.996Z,1516724697.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:58.028Z,1516724698.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:58.396Z,1516724698.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:58.426Z,1516724698.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:58.800Z,1516724698.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:58.815Z,1516724698.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:59.181Z,1516724699.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:59.217Z,1516724699.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:24:59.584Z,1516724699.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:24:59.611Z,1516724699.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:00.000Z,1516724700.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:00.015Z,1516724700.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:00.401Z,1516724700.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:00.425Z,1516724700.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:00.804Z,1516724700.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:00.819Z,1516724700.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:01.181Z,1516724701.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:01.209Z,1516724701.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:01.581Z,1516724701.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:01.621Z,1516724701.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:01.991Z,1516724701.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:02.027Z,1516724702.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:02.395Z,1516724702.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:02.423Z,1516724702.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:02.425Z,1516724702.425 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:02.425Z,1516724702.425 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 262 2018-01-23T16:25:02.425Z,1516724702.425 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:25:02.437Z,1516724702.437 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:25:02.791Z,1516724702.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:02.818Z,1516724702.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:02.843Z,1516724702.843 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:25:02.843Z,1516724702.843 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 262 2018-01-23T16:25:03.185Z,1516724703.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:03.201Z,1516724703.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:03.202Z,1516724703.202 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:25:03.202Z,1516724703.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:25:03.203Z,1516724703.203 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:25:03.589Z,1516724703.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:03.604Z,1516724703.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:03.996Z,1516724703.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:04.011Z,1516724704.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:04.396Z,1516724704.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:04.410Z,1516724704.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:04.791Z,1516724704.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:04.806Z,1516724704.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:05.188Z,1516724705.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:05.211Z,1516724705.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:05.588Z,1516724705.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:05.602Z,1516724705.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:05.995Z,1516724705.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:06.010Z,1516724706.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:06.395Z,1516724706.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:06.411Z,1516724706.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:06.794Z,1516724706.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:06.809Z,1516724706.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:07.196Z,1516724707.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:07.211Z,1516724707.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:07.588Z,1516724707.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:07.615Z,1516724707.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:07.999Z,1516724707.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:08.014Z,1516724708.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:08.400Z,1516724708.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:08.421Z,1516724708.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:08.800Z,1516724708.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:08.815Z,1516724708.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:09.190Z,1516724709.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:09.205Z,1516724709.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:09.589Z,1516724709.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:09.635Z,1516724709.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:09.998Z,1516724709.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:10.013Z,1516724710.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:10.398Z,1516724710.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:10.414Z,1516724710.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:10.798Z,1516724710.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:10.813Z,1516724710.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:11.199Z,1516724711.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:11.214Z,1516724711.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:11.584Z,1516724711.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:11.612Z,1516724711.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:11.984Z,1516724711.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:12.007Z,1516724712.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:12.391Z,1516724712.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:12.406Z,1516724712.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:12.784Z,1516724712.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:12.817Z,1516724712.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:13.203Z,1516724713.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:13.218Z,1516724713.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:13.604Z,1516724713.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:13.619Z,1516724713.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:13.999Z,1516724713.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:14.015Z,1516724714.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:14.380Z,1516724714.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:14.413Z,1516724714.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:14.780Z,1516724714.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:14.817Z,1516724714.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:15.193Z,1516724715.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:15.208Z,1516724715.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:15.580Z,1516724715.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:15.613Z,1516724715.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:15.613Z,1516724715.613 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 262 2018-01-23T16:25:15.613Z,1516724715.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:25:15.615Z,1516724715.615 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:15.615Z,1516724715.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 262 2018-01-23T16:25:15.615Z,1516724715.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:25:15.629Z,1516724715.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:25:15.629Z,1516724715.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:25:15.998Z,1516724715.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:16.033Z,1516724716.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:25:16.033Z,1516724716.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 262 2018-01-23T16:25:16.034Z,1516724716.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:25:16.034Z,1516724716.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 262 2018-01-23T16:25:16.403Z,1516724716.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:16.417Z,1516724716.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:25:16.417Z,1516724716.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:25:16.418Z,1516724716.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:25:16.418Z,1516724716.418 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:25:16.419Z,1516724716.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:25:16.419Z,1516724716.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:25:16.800Z,1516724716.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:16.829Z,1516724716.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:25:16.830Z,1516724716.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:17.181Z,1516724717.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:17.217Z,1516724717.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:25:17.218Z,1516724717.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:17.585Z,1516724717.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:17.611Z,1516724717.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:25:17.612Z,1516724717.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:17.980Z,1516724717.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:18.016Z,1516724718.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:25:18.017Z,1516724718.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:18.401Z,1516724718.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:18.415Z,1516724718.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:25:18.416Z,1516724718.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:18.801Z,1516724718.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:18.821Z,1516724718.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:25:18.822Z,1516724718.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:19.195Z,1516724719.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:19.217Z,1516724719.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:25:19.218Z,1516724719.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:19.580Z,1516724719.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:19.617Z,1516724719.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:25:19.618Z,1516724719.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:19.984Z,1516724719.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:20.010Z,1516724720.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:25:20.011Z,1516724720.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:20.381Z,1516724720.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:20.408Z,1516724720.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:25:20.409Z,1516724720.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:20.784Z,1516724720.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:20.818Z,1516724720.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:25:20.819Z,1516724720.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:21.203Z,1516724721.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:21.218Z,1516724721.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:25:21.219Z,1516724721.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:21.603Z,1516724721.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:21.621Z,1516724721.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:25:21.622Z,1516724721.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:21.991Z,1516724721.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:22.018Z,1516724722.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:25:22.019Z,1516724722.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:22.384Z,1516724722.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:22.416Z,1516724722.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:25:22.417Z,1516724722.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:22.781Z,1516724722.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:22.811Z,1516724722.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:25:22.812Z,1516724722.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:23.185Z,1516724723.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:23.225Z,1516724723.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:25:23.226Z,1516724723.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:23.585Z,1516724723.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:23.620Z,1516724723.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:25:23.621Z,1516724723.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:23.980Z,1516724723.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:23.996Z,1516724723.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:25:23.997Z,1516724723.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:24.001Z,1516724724.001 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T16:20:23.7Z 2018-01-23T16:25:24.001Z,1516724724.001 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:25:24.001Z,1516724724.001 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:25:24.395Z,1516724724.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:24.430Z,1516724724.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:25:24.431Z,1516724724.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:24.928Z,1516724724.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:24.949Z,1516724724.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T16:25:24.950Z,1516724724.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:25.199Z,1516724725.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:25.223Z,1516724725.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:25:25.224Z,1516724725.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:28.287Z,1516724728.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:28.303Z,1516724728.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T16:25:28.304Z,1516724728.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:28.379Z,1516724728.379 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0308.lzma 2018-01-23T16:25:28.399Z,1516724728.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:28.434Z,1516724728.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:25:28.435Z,1516724728.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:28.782Z,1516724728.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:28.813Z,1516724728.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:25:28.814Z,1516724728.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:29.150Z,1516724729.150 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0308.lzma.bak 2018-01-23T16:25:29.150Z,1516724729.150 [DataOverHttps](INFO): SBD MOMSN=7755878 2018-01-23T16:25:29.198Z,1516724729.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:29.213Z,1516724729.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:25:29.214Z,1516724729.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:29.838Z,1516724729.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:29.853Z,1516724729.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s. 2018-01-23T16:25:29.854Z,1516724729.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:29.969Z,1516724729.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:30.012Z,1516724730.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:25:30.013Z,1516724730.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:33.066Z,1516724733.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:33.091Z,1516724733.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T16:25:33.092Z,1516724733.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:33.196Z,1516724733.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:33.236Z,1516724733.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:25:33.237Z,1516724733.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:33.547Z,1516724733.547 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:33.562Z,1516724733.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T16:25:33.563Z,1516724733.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:33.959Z,1516724733.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:33.973Z,1516724733.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:25:33.974Z,1516724733.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:34.350Z,1516724734.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:34.365Z,1516724734.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:25:34.366Z,1516724734.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:34.746Z,1516724734.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:34.764Z,1516724734.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:25:34.765Z,1516724734.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:37.838Z,1516724737.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:37.857Z,1516724737.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:37.934Z,1516724737.934 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0309.lzma 2018-01-23T16:25:37.954Z,1516724737.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:37.969Z,1516724737.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:38.316Z,1516724738.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:38.343Z,1516724738.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:38.689Z,1516724738.689 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0309.lzma.bak 2018-01-23T16:25:38.689Z,1516724738.689 [DataOverHttps](INFO): SBD MOMSN=7755880 2018-01-23T16:25:38.724Z,1516724738.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:38.759Z,1516724738.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:39.368Z,1516724739.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:39.382Z,1516724739.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:39.385Z,1516724739.385 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:25:39.386Z,1516724739.386 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:25:39.386Z,1516724739.386 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:25:39.507Z,1516724739.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:39.527Z,1516724739.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:42.623Z,1516724742.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:42.638Z,1516724742.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:42.737Z,1516724742.737 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:42.772Z,1516724742.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:43.143Z,1516724743.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:43.169Z,1516724743.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:43.559Z,1516724743.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:43.574Z,1516724743.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:43.943Z,1516724743.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:43.969Z,1516724743.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:44.333Z,1516724744.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:44.349Z,1516724744.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:44.729Z,1516724744.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:44.743Z,1516724744.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:45.122Z,1516724745.122 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:45.151Z,1516724745.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:45.529Z,1516724745.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:45.544Z,1516724745.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:45.928Z,1516724745.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:45.944Z,1516724745.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:46.340Z,1516724746.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:46.367Z,1516724746.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:46.748Z,1516724746.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:46.778Z,1516724746.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:47.131Z,1516724747.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:47.147Z,1516724747.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:47.530Z,1516724747.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:47.553Z,1516724747.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:47.929Z,1516724747.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:47.943Z,1516724747.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:48.330Z,1516724748.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:48.344Z,1516724748.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:48.724Z,1516724748.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:48.755Z,1516724748.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:49.138Z,1516724749.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:49.153Z,1516724749.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:49.543Z,1516724749.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:49.564Z,1516724749.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:49.942Z,1516724749.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:49.957Z,1516724749.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:50.323Z,1516724750.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:50.350Z,1516724750.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:50.733Z,1516724750.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:50.748Z,1516724750.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:51.118Z,1516724751.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:51.165Z,1516724751.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:51.529Z,1516724751.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:51.565Z,1516724751.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:51.920Z,1516724751.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:51.958Z,1516724751.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:52.331Z,1516724752.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:52.365Z,1516724752.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:52.743Z,1516724752.743 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:52.761Z,1516724752.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:53.131Z,1516724753.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:53.165Z,1516724753.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:53.518Z,1516724753.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:53.533Z,1516724753.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:53.920Z,1516724753.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:53.957Z,1516724753.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:54.325Z,1516724754.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:54.340Z,1516724754.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:54.724Z,1516724754.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:54.761Z,1516724754.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:55.139Z,1516724755.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:55.166Z,1516724755.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:55.539Z,1516724755.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:55.569Z,1516724755.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:55.939Z,1516724755.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:55.973Z,1516724755.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:56.332Z,1516724756.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:56.370Z,1516724756.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:56.729Z,1516724756.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:56.744Z,1516724756.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:57.124Z,1516724757.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:57.140Z,1516724757.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:57.526Z,1516724757.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:57.549Z,1516724757.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:57.929Z,1516724757.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:57.944Z,1516724757.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:58.332Z,1516724758.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:58.347Z,1516724758.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:58.735Z,1516724758.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:58.750Z,1516724758.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:59.131Z,1516724759.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:59.149Z,1516724759.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:59.530Z,1516724759.530 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:59.545Z,1516724759.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:25:59.928Z,1516724759.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:25:59.943Z,1516724759.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:00.329Z,1516724760.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:00.349Z,1516724760.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:00.729Z,1516724760.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:00.745Z,1516724760.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:01.131Z,1516724761.131 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:01.147Z,1516724761.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:01.535Z,1516724761.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:01.550Z,1516724761.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:01.932Z,1516724761.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:01.947Z,1516724761.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:02.328Z,1516724762.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:02.342Z,1516724762.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:02.728Z,1516724762.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:02.749Z,1516724762.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:03.125Z,1516724763.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:03.140Z,1516724763.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:03.526Z,1516724763.526 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:03.557Z,1516724763.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:03.933Z,1516724763.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:03.948Z,1516724763.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:04.334Z,1516724764.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:04.349Z,1516724764.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:04.735Z,1516724764.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:04.750Z,1516724764.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:05.134Z,1516724765.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:05.156Z,1516724765.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:05.532Z,1516724765.532 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:05.548Z,1516724765.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:05.928Z,1516724765.928 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:05.949Z,1516724765.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:06.330Z,1516724766.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:06.345Z,1516724766.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:06.730Z,1516724766.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:06.753Z,1516724766.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:07.134Z,1516724767.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:07.149Z,1516724767.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:07.535Z,1516724767.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:07.550Z,1516724767.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:07.934Z,1516724767.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:07.949Z,1516724767.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:08.335Z,1516724768.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:08.351Z,1516724768.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:08.729Z,1516724768.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:08.744Z,1516724768.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:09.134Z,1516724769.134 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:09.149Z,1516724769.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:09.535Z,1516724769.535 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:09.550Z,1516724769.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:09.935Z,1516724769.935 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:09.956Z,1516724769.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:10.333Z,1516724770.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:10.349Z,1516724770.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:10.734Z,1516724770.734 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:10.749Z,1516724770.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:11.135Z,1516724771.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:11.150Z,1516724771.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:11.539Z,1516724771.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:11.561Z,1516724771.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:11.940Z,1516724771.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:11.955Z,1516724771.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:12.331Z,1516724772.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:12.346Z,1516724772.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:12.729Z,1516724772.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:12.744Z,1516724772.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:13.152Z,1516724773.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:13.187Z,1516724773.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:13.543Z,1516724773.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:13.558Z,1516724773.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:13.938Z,1516724773.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:13.954Z,1516724773.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:14.327Z,1516724774.327 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:14.348Z,1516724774.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:14.731Z,1516724774.731 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:14.746Z,1516724774.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:15.140Z,1516724775.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:15.169Z,1516724775.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:15.546Z,1516724775.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:15.561Z,1516724775.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:15.937Z,1516724775.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:15.964Z,1516724775.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:16.324Z,1516724776.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:16.351Z,1516724776.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:16.745Z,1516724776.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:16.760Z,1516724776.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:17.130Z,1516724777.130 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:17.164Z,1516724777.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:17.549Z,1516724777.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:17.564Z,1516724777.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:17.940Z,1516724777.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:17.972Z,1516724777.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:18.326Z,1516724778.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:18.354Z,1516724778.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:18.721Z,1516724778.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:18.758Z,1516724778.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:19.148Z,1516724779.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:19.169Z,1516724779.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:19.545Z,1516724779.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:19.559Z,1516724779.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:19.946Z,1516724779.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:19.961Z,1516724779.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:20.342Z,1516724780.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:20.358Z,1516724780.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:20.719Z,1516724780.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:20.759Z,1516724780.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:21.132Z,1516724781.132 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:21.161Z,1516724781.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:21.539Z,1516724781.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:21.575Z,1516724781.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:21.948Z,1516724781.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:21.964Z,1516724781.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:22.326Z,1516724782.326 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:22.358Z,1516724782.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:22.724Z,1516724782.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:22.757Z,1516724782.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:23.143Z,1516724783.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:23.164Z,1516724783.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:23.540Z,1516724783.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:23.570Z,1516724783.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:23.940Z,1516724783.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:23.965Z,1516724783.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:24.329Z,1516724784.329 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:24.363Z,1516724784.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:24.729Z,1516724784.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:24.761Z,1516724784.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:25.151Z,1516724785.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:25.166Z,1516724785.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:25.555Z,1516724785.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:25.576Z,1516724785.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:25.933Z,1516724785.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:25.961Z,1516724785.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:26.334Z,1516724786.334 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:26.365Z,1516724786.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:26.729Z,1516724786.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:26.764Z,1516724786.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:27.135Z,1516724787.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:27.157Z,1516724787.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:27.554Z,1516724787.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:27.577Z,1516724787.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:27.939Z,1516724787.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:27.965Z,1516724787.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:28.328Z,1516724788.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:28.361Z,1516724788.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:28.725Z,1516724788.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:28.740Z,1516724788.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:29.141Z,1516724789.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:29.172Z,1516724789.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:29.542Z,1516724789.542 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:29.577Z,1516724789.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:29.945Z,1516724789.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:29.977Z,1516724789.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:30.332Z,1516724790.332 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:30.384Z,1516724790.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:30.729Z,1516724790.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:30.750Z,1516724790.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:31.141Z,1516724791.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:31.185Z,1516724791.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:31.545Z,1516724791.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:31.565Z,1516724791.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:31.943Z,1516724791.943 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:31.999Z,1516724791.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:32.337Z,1516724792.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:32.361Z,1516724792.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:32.735Z,1516724792.735 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:32.757Z,1516724792.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:33.144Z,1516724793.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:33.159Z,1516724793.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:33.556Z,1516724793.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:33.593Z,1516724793.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:33.959Z,1516724793.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:34.056Z,1516724794.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:34.330Z,1516724794.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:34.368Z,1516724794.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:34.729Z,1516724794.729 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:34.764Z,1516724794.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:35.150Z,1516724795.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:35.205Z,1516724795.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:35.550Z,1516724795.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:35.611Z,1516724795.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:35.978Z,1516724795.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:36.017Z,1516724796.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:36.330Z,1516724796.330 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:36.380Z,1516724796.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:36.728Z,1516724796.728 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:36.765Z,1516724796.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:37.136Z,1516724797.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:37.165Z,1516724797.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:37.580Z,1516724797.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:37.644Z,1516724797.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:37.964Z,1516724797.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:38.029Z,1516724798.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:38.345Z,1516724798.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:38.381Z,1516724798.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:38.740Z,1516724798.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:38.817Z,1516724798.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:39.152Z,1516724799.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:39.201Z,1516724799.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:39.550Z,1516724799.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:39.577Z,1516724799.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:39.944Z,1516724799.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:39.961Z,1516724799.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:46.070Z,1516724806.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:46.105Z,1516724806.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:46.218Z,1516724806.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:46.273Z,1516724806.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:46.603Z,1516724806.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:46.656Z,1516724806.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:47.011Z,1516724807.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:47.037Z,1516724807.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:47.394Z,1516724807.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:47.437Z,1516724807.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:47.781Z,1516724807.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:47.832Z,1516724807.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:48.192Z,1516724808.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:48.219Z,1516724808.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:48.610Z,1516724808.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:48.629Z,1516724808.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:48.995Z,1516724808.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:49.048Z,1516724809.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:49.402Z,1516724809.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:49.422Z,1516724809.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:49.813Z,1516724809.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:49.860Z,1516724809.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:50.209Z,1516724810.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:50.261Z,1516724810.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:50.582Z,1516724810.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:50.613Z,1516724810.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:51.001Z,1516724811.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:51.032Z,1516724811.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:51.387Z,1516724811.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:51.459Z,1516724811.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:51.783Z,1516724811.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:51.822Z,1516724811.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:52.220Z,1516724812.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:52.252Z,1516724812.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:52.629Z,1516724812.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:52.715Z,1516724812.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:52.998Z,1516724812.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:53.033Z,1516724813.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:53.408Z,1516724813.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:53.451Z,1516724813.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:53.785Z,1516724813.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:53.799Z,1516724813.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:54.188Z,1516724814.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:54.202Z,1516724814.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:54.591Z,1516724814.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:54.606Z,1516724814.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:54.991Z,1516724814.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:55.012Z,1516724815.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:55.387Z,1516724815.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:55.402Z,1516724815.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:55.781Z,1516724815.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:55.808Z,1516724815.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:56.195Z,1516724816.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:56.210Z,1516724816.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:56.594Z,1516724816.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:56.617Z,1516724816.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:56.994Z,1516724816.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:57.009Z,1516724817.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:57.387Z,1516724817.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:57.401Z,1516724817.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:57.784Z,1516724817.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:57.803Z,1516724817.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:58.191Z,1516724818.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:58.214Z,1516724818.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:58.599Z,1516724818.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:58.613Z,1516724818.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:58.995Z,1516724818.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:59.010Z,1516724819.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:59.381Z,1516724819.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:59.405Z,1516724819.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:26:59.785Z,1516724819.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:26:59.804Z,1516724819.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:00.194Z,1516724820.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:00.210Z,1516724820.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:00.598Z,1516724820.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:00.613Z,1516724820.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:00.995Z,1516724820.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:01.010Z,1516724821.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:01.378Z,1516724821.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:01.412Z,1516724821.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:01.777Z,1516724821.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:01.813Z,1516724821.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:02.200Z,1516724822.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:02.215Z,1516724822.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:02.600Z,1516724822.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:02.615Z,1516724822.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:02.992Z,1516724822.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:03.022Z,1516724823.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:03.377Z,1516724823.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:03.423Z,1516724823.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:03.777Z,1516724823.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:03.804Z,1516724823.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:04.187Z,1516724824.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:04.214Z,1516724824.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:04.601Z,1516724824.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:04.620Z,1516724824.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:04.988Z,1516724824.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:05.021Z,1516724825.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:05.385Z,1516724825.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:05.412Z,1516724825.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:05.776Z,1516724825.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:05.814Z,1516724825.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:06.187Z,1516724826.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:06.274Z,1516724826.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:06.603Z,1516724826.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:06.618Z,1516724826.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:06.987Z,1516724826.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:07.022Z,1516724827.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:07.378Z,1516724827.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:07.405Z,1516724827.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:07.776Z,1516724827.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:07.813Z,1516724827.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:08.191Z,1516724828.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:08.219Z,1516724828.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:08.591Z,1516724828.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:08.617Z,1516724828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:08.987Z,1516724828.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:09.014Z,1516724829.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:09.385Z,1516724829.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:09.400Z,1516724829.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:09.784Z,1516724829.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:09.821Z,1516724829.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:10.195Z,1516724830.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:10.226Z,1516724830.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:10.599Z,1516724830.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:10.633Z,1516724830.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:10.988Z,1516724830.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:11.003Z,1516724831.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:11.382Z,1516724831.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:11.409Z,1516724831.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:11.782Z,1516724831.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:11.809Z,1516724831.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:12.188Z,1516724832.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:12.209Z,1516724832.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:12.607Z,1516724832.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:12.629Z,1516724832.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:12.991Z,1516724832.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:13.013Z,1516724833.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:13.382Z,1516724833.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:13.402Z,1516724833.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:13.785Z,1516724833.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:13.800Z,1516724833.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:14.193Z,1516724834.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:14.218Z,1516724834.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:14.594Z,1516724834.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:14.609Z,1516724834.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:14.994Z,1516724834.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:15.013Z,1516724835.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:15.386Z,1516724835.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:15.401Z,1516724835.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:15.781Z,1516724835.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:15.804Z,1516724835.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:16.190Z,1516724836.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:16.217Z,1516724836.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:16.599Z,1516724836.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:16.614Z,1516724836.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:16.996Z,1516724836.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:17.011Z,1516724837.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:17.381Z,1516724837.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:17.410Z,1516724837.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:17.776Z,1516724837.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:17.811Z,1516724837.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:18.197Z,1516724838.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:18.212Z,1516724838.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:18.596Z,1516724838.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:18.619Z,1516724838.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:18.986Z,1516724838.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:19.014Z,1516724839.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:19.374Z,1516724839.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:19.398Z,1516724839.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:19.777Z,1516724839.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:19.808Z,1516724839.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:20.185Z,1516724840.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:20.220Z,1516724840.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:20.592Z,1516724840.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:20.625Z,1516724840.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:20.992Z,1516724840.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:21.029Z,1516724841.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:21.395Z,1516724841.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:21.422Z,1516724841.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:21.786Z,1516724841.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:21.817Z,1516724841.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:22.185Z,1516724842.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:22.200Z,1516724842.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:22.583Z,1516724842.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:22.598Z,1516724842.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:22.978Z,1516724842.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:23.013Z,1516724843.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:23.400Z,1516724843.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:23.429Z,1516724843.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:23.792Z,1516724843.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:23.840Z,1516724843.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:24.188Z,1516724844.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:24.209Z,1516724844.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:24.586Z,1516724844.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:24.602Z,1516724844.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:24.986Z,1516724844.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:25.001Z,1516724845.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:25.381Z,1516724845.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:25.405Z,1516724845.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:25.784Z,1516724845.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:25.804Z,1516724845.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:26.187Z,1516724846.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:26.202Z,1516724846.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:26.591Z,1516724846.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:26.606Z,1516724846.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:26.992Z,1516724846.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:27.007Z,1516724847.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:27.392Z,1516724847.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:27.412Z,1516724847.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:27.789Z,1516724847.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:27.805Z,1516724847.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:28.185Z,1516724848.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:28.201Z,1516724848.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:28.586Z,1516724848.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:28.602Z,1516724848.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:28.980Z,1516724848.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:29.004Z,1516724849.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:29.395Z,1516724849.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:29.410Z,1516724849.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:29.807Z,1516724849.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:29.822Z,1516724849.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:30.192Z,1516724850.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:30.214Z,1516724850.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:30.576Z,1516724850.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:30.603Z,1516724850.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:30.976Z,1516724850.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:31.010Z,1516724851.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:31.374Z,1516724851.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:31.406Z,1516724851.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:31.777Z,1516724851.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:31.812Z,1516724851.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:32.180Z,1516724852.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:32.214Z,1516724852.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:32.587Z,1516724852.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:32.623Z,1516724852.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:32.000Z,1516724853.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:33.015Z,1516724853.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:33.386Z,1516724853.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:33.422Z,1516724853.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:33.776Z,1516724853.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:33.813Z,1516724853.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:34.176Z,1516724854.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:34.213Z,1516724854.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:34.577Z,1516724854.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:34.604Z,1516724854.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:34.976Z,1516724854.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:35.017Z,1516724855.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:35.388Z,1516724855.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:35.413Z,1516724855.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:35.795Z,1516724855.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:35.830Z,1516724855.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:36.192Z,1516724856.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:36.219Z,1516724856.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:36.588Z,1516724856.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:36.625Z,1516724856.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:36.986Z,1516724856.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:37.000Z,1516724857.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:37.380Z,1516724857.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:37.404Z,1516724857.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:37.784Z,1516724857.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:37.799Z,1516724857.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:38.184Z,1516724858.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:38.204Z,1516724858.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:38.588Z,1516724858.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:38.603Z,1516724858.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:38.999Z,1516724858.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:39.014Z,1516724859.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:39.391Z,1516724859.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:39.406Z,1516724859.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:39.785Z,1516724859.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:39.800Z,1516724859.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:40.185Z,1516724860.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:40.205Z,1516724860.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:43.281Z,1516724863.281 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:43.296Z,1516724863.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:43.391Z,1516724863.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:43.434Z,1516724863.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:43.764Z,1516724863.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:43.789Z,1516724863.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:44.175Z,1516724864.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:44.191Z,1516724864.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:44.560Z,1516724864.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:44.588Z,1516724864.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:44.953Z,1516724864.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:44.984Z,1516724864.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:45.349Z,1516724865.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:45.369Z,1516724865.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:45.751Z,1516724865.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:45.766Z,1516724865.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:46.146Z,1516724866.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:46.170Z,1516724866.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:46.524Z,1516724866.524 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:27:46.524Z,1516724866.524 [NAL9602] Data Fault, FailCount= 2 2018-01-23T16:27:46.524Z,1516724866.524 [NAL9602](ERROR): Data Fault 2018-01-23T16:27:46.548Z,1516724866.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:46.580Z,1516724866.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:46.605Z,1516724866.605 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:27:46.921Z,1516724866.921 [NAL9602](INFO): Powering down 2018-01-23T16:27:46.939Z,1516724866.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:46.974Z,1516724866.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:47.340Z,1516724867.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:47.367Z,1516724867.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:47.740Z,1516724867.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:47.777Z,1516724867.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:47.798Z,1516724867.798 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T16:27:47.798Z,1516724867.798 [NAL9602] No Fault, FailCount= 2 2018-01-23T16:27:48.137Z,1516724868.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:48.161Z,1516724868.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:48.540Z,1516724868.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:48.568Z,1516724868.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:48.944Z,1516724868.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:48.982Z,1516724868.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:49.340Z,1516724869.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:49.356Z,1516724869.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:49.740Z,1516724869.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:49.760Z,1516724869.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:50.144Z,1516724870.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:50.160Z,1516724870.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:50.548Z,1516724870.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:50.564Z,1516724870.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:50.952Z,1516724870.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:50.967Z,1516724870.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:51.346Z,1516724871.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:51.361Z,1516724871.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:51.745Z,1516724871.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:51.761Z,1516724871.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:52.146Z,1516724872.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:52.168Z,1516724872.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:52.546Z,1516724872.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:52.573Z,1516724872.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:52.949Z,1516724872.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:52.964Z,1516724872.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:53.350Z,1516724873.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:53.365Z,1516724873.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:53.753Z,1516724873.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:53.773Z,1516724873.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:54.149Z,1516724874.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:54.164Z,1516724874.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:54.550Z,1516724874.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:54.568Z,1516724874.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:54.948Z,1516724874.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:54.969Z,1516724874.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:55.349Z,1516724875.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:55.364Z,1516724875.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:55.750Z,1516724875.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:55.765Z,1516724875.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:56.149Z,1516724876.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:56.165Z,1516724876.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:56.553Z,1516724876.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:56.569Z,1516724876.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:56.955Z,1516724876.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:56.977Z,1516724876.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:57.345Z,1516724877.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:57.373Z,1516724877.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:57.754Z,1516724877.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:57.769Z,1516724877.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:58.151Z,1516724878.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:58.166Z,1516724878.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:58.548Z,1516724878.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:58.570Z,1516724878.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:58.950Z,1516724878.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:58.965Z,1516724878.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:59.357Z,1516724879.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:59.371Z,1516724879.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:27:59.753Z,1516724879.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:27:59.769Z,1516724879.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:00.149Z,1516724880.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:00.165Z,1516724880.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:00.549Z,1516724880.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:00.565Z,1516724880.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:00.946Z,1516724880.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:00.962Z,1516724880.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:01.349Z,1516724881.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:01.365Z,1516724881.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:01.750Z,1516724881.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:01.764Z,1516724881.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:02.149Z,1516724882.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:02.164Z,1516724882.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:02.549Z,1516724882.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:02.564Z,1516724882.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:02.948Z,1516724882.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:02.963Z,1516724882.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:03.348Z,1516724883.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:03.364Z,1516724883.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:03.366Z,1516724883.366 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:03.366Z,1516724883.366 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 263 2018-01-23T16:28:03.366Z,1516724883.366 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:28:03.377Z,1516724883.377 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:28:03.748Z,1516724883.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:03.768Z,1516724883.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:03.780Z,1516724883.780 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:28:03.780Z,1516724883.780 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 263 2018-01-23T16:28:04.148Z,1516724884.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:04.175Z,1516724884.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:04.177Z,1516724884.177 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:28:04.177Z,1516724884.177 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:28:04.177Z,1516724884.177 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:28:04.548Z,1516724884.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:04.573Z,1516724884.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:04.949Z,1516724884.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:04.964Z,1516724884.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:05.348Z,1516724885.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:05.373Z,1516724885.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:05.748Z,1516724885.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:05.763Z,1516724885.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:06.148Z,1516724886.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:06.164Z,1516724886.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:06.549Z,1516724886.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:06.568Z,1516724886.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:06.937Z,1516724886.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:06.973Z,1516724886.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:07.348Z,1516724887.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:07.368Z,1516724887.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:07.748Z,1516724887.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:07.773Z,1516724887.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:08.137Z,1516724888.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:08.173Z,1516724888.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:08.553Z,1516724888.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:08.568Z,1516724888.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:08.948Z,1516724888.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:08.973Z,1516724888.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:09.337Z,1516724889.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:09.373Z,1516724889.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:09.748Z,1516724889.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:09.764Z,1516724889.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:10.148Z,1516724890.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:10.173Z,1516724890.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:10.537Z,1516724890.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:10.573Z,1516724890.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:10.953Z,1516724890.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:10.968Z,1516724890.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:11.348Z,1516724891.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:11.373Z,1516724891.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:11.748Z,1516724891.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:11.763Z,1516724891.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:12.148Z,1516724892.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:12.164Z,1516724892.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:12.548Z,1516724892.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:12.573Z,1516724892.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:12.937Z,1516724892.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:12.973Z,1516724892.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:13.352Z,1516724893.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:13.367Z,1516724893.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:13.750Z,1516724893.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:13.765Z,1516724893.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:14.137Z,1516724894.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:14.174Z,1516724894.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:14.553Z,1516724894.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:14.568Z,1516724894.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:14.948Z,1516724894.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:14.968Z,1516724894.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:15.337Z,1516724895.337 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:15.373Z,1516724895.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:15.753Z,1516724895.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:15.768Z,1516724895.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:16.148Z,1516724896.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:16.173Z,1516724896.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:16.537Z,1516724896.537 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:16.573Z,1516724896.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:16.573Z,1516724896.573 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 263 2018-01-23T16:28:16.574Z,1516724896.574 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:28:16.575Z,1516724896.575 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:16.575Z,1516724896.575 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 263 2018-01-23T16:28:16.576Z,1516724896.576 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:28:16.588Z,1516724896.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:28:16.588Z,1516724896.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:28:16.924Z,1516724896.924 [NAL9602](INFO): Powering up NAL9602 2018-01-23T16:28:16.942Z,1516724896.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:16.996Z,1516724896.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:28:16.996Z,1516724896.996 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 263 2018-01-23T16:28:16.997Z,1516724896.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:28:16.997Z,1516724896.997 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 263 2018-01-23T16:28:17.340Z,1516724897.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:17.367Z,1516724897.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:28:17.367Z,1516724897.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:28:17.367Z,1516724897.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:28:17.368Z,1516724897.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:28:17.368Z,1516724897.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:28:17.369Z,1516724897.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:28:17.740Z,1516724897.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:17.777Z,1516724897.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:28:17.778Z,1516724897.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:18.144Z,1516724898.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:18.184Z,1516724898.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:28:18.185Z,1516724898.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:18.540Z,1516724898.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:18.577Z,1516724898.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:28:18.578Z,1516724898.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:18.937Z,1516724898.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:18.952Z,1516724898.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:28:18.953Z,1516724898.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:19.339Z,1516724899.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:19.354Z,1516724899.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:28:19.355Z,1516724899.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:19.740Z,1516724899.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:19.755Z,1516724899.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:28:19.756Z,1516724899.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:20.144Z,1516724900.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:20.159Z,1516724900.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:28:20.160Z,1516724900.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:20.545Z,1516724900.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:20.564Z,1516724900.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:28:20.565Z,1516724900.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:20.945Z,1516724900.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:20.960Z,1516724900.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:28:20.961Z,1516724900.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:21.345Z,1516724901.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:21.360Z,1516724901.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:28:21.360Z,1516724901.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:21.750Z,1516724901.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:21.765Z,1516724901.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:28:21.765Z,1516724901.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:22.145Z,1516724902.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:22.170Z,1516724902.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:28:22.171Z,1516724902.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:22.544Z,1516724902.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:22.571Z,1516724902.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:28:22.572Z,1516724902.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:22.945Z,1516724902.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:22.972Z,1516724902.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:28:22.973Z,1516724902.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:23.346Z,1516724903.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:23.370Z,1516724903.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:28:23.375Z,1516724903.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:23.748Z,1516724903.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:23.763Z,1516724903.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:28:23.764Z,1516724903.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:24.144Z,1516724904.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:24.176Z,1516724904.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:28:24.177Z,1516724904.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:24.552Z,1516724904.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:24.571Z,1516724904.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:28:24.572Z,1516724904.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:24.937Z,1516724904.937 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:24.980Z,1516724904.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:28:24.981Z,1516724904.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:25.340Z,1516724905.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:25.376Z,1516724905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:28:25.377Z,1516724905.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:25.739Z,1516724905.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:25.754Z,1516724905.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:28:25.771Z,1516724905.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:26.140Z,1516724906.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:26.155Z,1516724906.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:28:26.156Z,1516724906.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:26.553Z,1516724906.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:26.583Z,1516724906.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:28:26.584Z,1516724906.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:26.949Z,1516724906.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:26.984Z,1516724906.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:28:26.985Z,1516724906.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:27.356Z,1516724907.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:27.385Z,1516724907.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:28:27.386Z,1516724907.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:27.740Z,1516724907.740 [NAL9602](INFO): NAL9602 initialized 2018-01-23T16:28:27.757Z,1516724907.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:27.787Z,1516724907.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:28:27.788Z,1516724907.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:28.153Z,1516724908.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:28.185Z,1516724908.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:28:28.186Z,1516724908.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:28.556Z,1516724908.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:28.585Z,1516724908.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:28:28.586Z,1516724908.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:28.976Z,1516724908.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:28.990Z,1516724908.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:28:28.992Z,1516724908.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:29.373Z,1516724909.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:29.389Z,1516724909.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:28:29.389Z,1516724909.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:29.745Z,1516724909.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:29.780Z,1516724909.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:28:29.781Z,1516724909.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:30.150Z,1516724910.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:30.164Z,1516724910.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:28:30.165Z,1516724910.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:30.546Z,1516724910.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:30.561Z,1516724910.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:28:30.562Z,1516724910.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:30.964Z,1516724910.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:30.997Z,1516724910.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:28:30.998Z,1516724910.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:31.364Z,1516724911.364 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:31.391Z,1516724911.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:28:31.392Z,1516724911.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:31.764Z,1516724911.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:31.796Z,1516724911.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:28:31.797Z,1516724911.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:32.146Z,1516724912.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:32.170Z,1516724912.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:28:32.171Z,1516724912.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:32.551Z,1516724912.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:32.565Z,1516724912.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:28:32.566Z,1516724912.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:32.948Z,1516724912.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:32.976Z,1516724912.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:28:32.977Z,1516724912.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:33.350Z,1516724913.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:33.365Z,1516724913.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:28:33.366Z,1516724913.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:33.761Z,1516724913.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:33.775Z,1516724913.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:28:33.776Z,1516724913.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:34.164Z,1516724914.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:34.184Z,1516724914.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:28:34.185Z,1516724914.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:34.564Z,1516724914.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:34.584Z,1516724914.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:28:34.585Z,1516724914.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:34.941Z,1516724914.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:34.969Z,1516724914.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:28:34.970Z,1516724914.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:35.341Z,1516724915.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:35.372Z,1516724915.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:28:35.373Z,1516724915.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:35.750Z,1516724915.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:35.780Z,1516724915.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:28:35.780Z,1516724915.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:36.146Z,1516724916.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:36.186Z,1516724916.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:28:36.187Z,1516724916.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:36.544Z,1516724916.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:36.577Z,1516724916.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:36.963Z,1516724916.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:36.978Z,1516724916.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:37.368Z,1516724917.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:37.391Z,1516724917.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:37.771Z,1516724917.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:37.786Z,1516724917.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:38.141Z,1516724918.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:38.157Z,1516724918.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:38.541Z,1516724918.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:38.557Z,1516724918.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:38.955Z,1516724918.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:38.982Z,1516724918.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:39.354Z,1516724919.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:39.395Z,1516724919.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:39.764Z,1516724919.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:39.790Z,1516724919.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:40.167Z,1516724920.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:40.194Z,1516724920.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:40.568Z,1516724920.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:40.601Z,1516724920.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:43.651Z,1516724923.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:43.669Z,1516724923.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:43.766Z,1516724923.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:43.802Z,1516724923.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:44.160Z,1516724924.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:44.195Z,1516724924.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:44.560Z,1516724924.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:44.595Z,1516724924.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:44.952Z,1516724924.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:44.967Z,1516724924.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:45.351Z,1516724925.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:45.365Z,1516724925.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:45.753Z,1516724925.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:45.768Z,1516724925.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:46.155Z,1516724926.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:46.170Z,1516724926.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:46.548Z,1516724926.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:46.563Z,1516724926.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:46.954Z,1516724926.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:46.969Z,1516724926.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:47.356Z,1516724927.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:47.377Z,1516724927.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:47.767Z,1516724927.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:47.802Z,1516724927.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:48.148Z,1516724928.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:48.163Z,1516724928.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:48.545Z,1516724928.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:48.578Z,1516724928.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:48.956Z,1516724928.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:48.970Z,1516724928.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:49.353Z,1516724929.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:49.368Z,1516724929.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:49.767Z,1516724929.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:49.782Z,1516724929.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:50.166Z,1516724930.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:50.181Z,1516724930.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:50.562Z,1516724930.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:50.577Z,1516724930.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:50.953Z,1516724930.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:50.973Z,1516724930.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:51.353Z,1516724931.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:51.368Z,1516724931.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:51.741Z,1516724931.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:51.781Z,1516724931.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:52.144Z,1516724932.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:52.171Z,1516724932.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:52.543Z,1516724932.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:52.578Z,1516724932.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:52.964Z,1516724932.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:52.979Z,1516724932.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:53.360Z,1516724933.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:53.392Z,1516724933.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:53.766Z,1516724933.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:53.780Z,1516724933.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:54.140Z,1516724934.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:54.164Z,1516724934.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:54.553Z,1516724934.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:54.579Z,1516724934.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:54.941Z,1516724934.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:54.981Z,1516724934.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:55.339Z,1516724935.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:55.350Z,1516724935.350 [PNI_TCM](ERROR): CRC does not match. Expected:0x16566 got:0x17072 2018-01-23T16:28:55.389Z,1516724935.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:55.751Z,1516724935.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:55.778Z,1516724935.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:56.155Z,1516724936.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:56.188Z,1516724936.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:56.557Z,1516724936.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:56.595Z,1516724936.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:56.941Z,1516724936.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:56.976Z,1516724936.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:57.343Z,1516724937.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:57.358Z,1516724937.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:57.749Z,1516724937.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:57.765Z,1516724937.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:58.146Z,1516724938.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:58.192Z,1516724938.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:58.555Z,1516724938.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:58.563Z,1516724938.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x64065 got:0x32536 2018-01-23T16:28:58.592Z,1516724938.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:58.957Z,1516724938.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:58.992Z,1516724938.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:59.367Z,1516724939.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:59.397Z,1516724939.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:28:59.765Z,1516724939.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:28:59.797Z,1516724939.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:00.141Z,1516724940.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:00.188Z,1516724940.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:00.555Z,1516724940.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:00.563Z,1516724940.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x29250 got:0x40476 2018-01-23T16:29:00.596Z,1516724940.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:00.954Z,1516724940.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:00.969Z,1516724940.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:01.342Z,1516724941.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:01.386Z,1516724941.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:01.766Z,1516724941.766 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:01.790Z,1516724941.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:02.167Z,1516724942.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:02.192Z,1516724942.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:02.564Z,1516724942.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:02.589Z,1516724942.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:02.953Z,1516724942.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:02.996Z,1516724942.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:03.354Z,1516724943.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:03.364Z,1516724943.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T16:29:03.406Z,1516724943.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:03.751Z,1516724943.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:03.766Z,1516724943.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:04.151Z,1516724944.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:04.166Z,1516724944.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:04.544Z,1516724944.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:04.573Z,1516724944.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:04.952Z,1516724944.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:04.970Z,1516724944.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:05.368Z,1516724945.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:05.390Z,1516724945.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:05.754Z,1516724945.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:05.772Z,1516724945.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:06.148Z,1516724946.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:06.186Z,1516724946.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:06.548Z,1516724946.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:06.568Z,1516724946.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:06.950Z,1516724946.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:06.967Z,1516724946.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:07.350Z,1516724947.350 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:07.366Z,1516724947.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:07.752Z,1516724947.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:07.792Z,1516724947.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:08.155Z,1516724948.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:08.173Z,1516724948.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:08.557Z,1516724948.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:08.572Z,1516724948.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:08.955Z,1516724948.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:08.970Z,1516724948.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:09.352Z,1516724949.352 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:09.396Z,1516724949.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:09.754Z,1516724949.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:09.773Z,1516724949.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:10.155Z,1516724950.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:10.172Z,1516724950.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:10.551Z,1516724950.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:10.566Z,1516724950.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:10.957Z,1516724950.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:10.996Z,1516724950.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:11.356Z,1516724951.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:11.375Z,1516724951.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:11.756Z,1516724951.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:11.780Z,1516724951.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:12.150Z,1516724952.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:12.167Z,1516724952.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:12.550Z,1516724952.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:12.597Z,1516724952.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:12.950Z,1516724952.950 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:12.965Z,1516724952.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:13.348Z,1516724953.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:13.368Z,1516724953.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:13.757Z,1516724953.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:13.777Z,1516724953.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:14.159Z,1516724954.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:14.200Z,1516724954.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:14.564Z,1516724954.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:14.594Z,1516724954.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:14.948Z,1516724954.948 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:14.973Z,1516724954.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:15.353Z,1516724955.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:15.370Z,1516724955.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:15.749Z,1516724955.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:15.803Z,1516724955.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:16.148Z,1516724956.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:16.178Z,1516724956.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:16.540Z,1516724956.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:16.581Z,1516724956.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:16.960Z,1516724956.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:16.990Z,1516724956.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:17.366Z,1516724957.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:17.406Z,1516724957.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:17.764Z,1516724957.764 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:17.784Z,1516724957.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:18.141Z,1516724958.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:18.178Z,1516724958.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:18.541Z,1516724958.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:18.574Z,1516724958.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:18.942Z,1516724958.942 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:18.974Z,1516724958.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:19.338Z,1516724959.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:19.363Z,1516724959.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:19.753Z,1516724959.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:19.786Z,1516724959.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:20.173Z,1516724960.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:20.188Z,1516724960.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:20.552Z,1516724960.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:20.600Z,1516724960.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:20.944Z,1516724960.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:20.985Z,1516724960.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:21.339Z,1516724961.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:21.383Z,1516724961.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:21.741Z,1516724961.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:21.769Z,1516724961.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:22.141Z,1516724962.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:22.157Z,1516724962.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:22.540Z,1516724962.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:22.560Z,1516724962.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:22.955Z,1516724962.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:22.982Z,1516724962.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:23.369Z,1516724963.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:23.396Z,1516724963.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:23.763Z,1516724963.763 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:23.804Z,1516724963.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:24.141Z,1516724964.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:24.157Z,1516724964.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:24.550Z,1516724964.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:24.565Z,1516724964.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:24.945Z,1516724964.945 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:24.982Z,1516724964.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:25.347Z,1516724965.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:25.362Z,1516724965.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:25.752Z,1516724965.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:25.767Z,1516724965.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:26.156Z,1516724966.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:26.177Z,1516724966.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:26.564Z,1516724966.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:26.600Z,1516724966.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:26.954Z,1516724966.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:26.969Z,1516724966.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:27.349Z,1516724967.349 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:27.369Z,1516724967.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:27.750Z,1516724967.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:27.765Z,1516724967.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:28.145Z,1516724968.145 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:28.169Z,1516724968.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:28.548Z,1516724968.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:28.563Z,1516724968.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:28.959Z,1516724968.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:28.974Z,1516724968.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:29.358Z,1516724969.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:29.376Z,1516724969.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:29.758Z,1516724969.758 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:29.775Z,1516724969.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:30.146Z,1516724970.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:30.162Z,1516724970.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:30.546Z,1516724970.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:30.569Z,1516724970.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:30.949Z,1516724970.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:30.964Z,1516724970.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:31.346Z,1516724971.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:31.362Z,1516724971.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:31.754Z,1516724971.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:31.773Z,1516724971.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:32.162Z,1516724972.162 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:32.180Z,1516724972.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:32.561Z,1516724972.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:32.576Z,1516724972.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:32.940Z,1516724972.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:32.979Z,1516724972.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:33.340Z,1516724973.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:33.372Z,1516724973.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:33.754Z,1516724973.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:33.769Z,1516724973.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:34.141Z,1516724974.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:34.177Z,1516724974.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:34.540Z,1516724974.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:34.572Z,1516724974.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:34.961Z,1516724974.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:34.981Z,1516724974.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:35.367Z,1516724975.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:35.382Z,1516724975.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:35.760Z,1516724975.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:35.780Z,1516724975.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:36.138Z,1516724976.138 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:36.169Z,1516724976.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:36.540Z,1516724976.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:36.567Z,1516724976.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:36.941Z,1516724976.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:36.969Z,1516724976.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:37.340Z,1516724977.340 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:37.372Z,1516724977.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:37.760Z,1516724977.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:37.778Z,1516724977.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:38.160Z,1516724978.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:38.183Z,1516724978.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:38.561Z,1516724978.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:38.576Z,1516724978.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:38.940Z,1516724978.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:38.977Z,1516724978.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:39.339Z,1516724979.339 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:39.377Z,1516724979.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:39.740Z,1516724979.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:39.776Z,1516724979.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:40.141Z,1516724980.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:40.173Z,1516724980.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:40.541Z,1516724980.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:40.577Z,1516724980.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:40.953Z,1516724980.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:40.976Z,1516724980.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:44.087Z,1516724984.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:44.105Z,1516724984.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:44.214Z,1516724984.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:44.238Z,1516724984.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:44.590Z,1516724984.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:44.633Z,1516724984.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:44.989Z,1516724984.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:45.009Z,1516724985.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:45.385Z,1516724985.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:45.405Z,1516724985.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:45.791Z,1516724985.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:45.810Z,1516724985.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:46.190Z,1516724986.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:46.206Z,1516724986.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:46.607Z,1516724986.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:46.639Z,1516724986.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:46.986Z,1516724986.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:47.031Z,1516724987.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:47.376Z,1516724987.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:47.415Z,1516724987.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:47.780Z,1516724987.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:47.800Z,1516724987.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:48.191Z,1516724988.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:48.213Z,1516724988.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:48.585Z,1516724988.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:48.605Z,1516724988.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:48.994Z,1516724988.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:49.014Z,1516724989.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:49.395Z,1516724989.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:49.413Z,1516724989.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:49.795Z,1516724989.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:49.811Z,1516724989.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:50.186Z,1516724990.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:50.201Z,1516724990.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:50.591Z,1516724990.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:50.616Z,1516724990.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:50.987Z,1516724990.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:51.002Z,1516724991.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:51.389Z,1516724991.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:51.409Z,1516724991.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:51.800Z,1516724991.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:51.825Z,1516724991.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:52.196Z,1516724992.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:52.215Z,1516724992.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:52.596Z,1516724992.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:52.611Z,1516724992.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:52.991Z,1516724992.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:53.006Z,1516724993.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:53.376Z,1516724993.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:53.409Z,1516724993.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:53.776Z,1516724993.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:53.803Z,1516724993.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:54.177Z,1516724994.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:54.205Z,1516724994.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:54.576Z,1516724994.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:54.606Z,1516724994.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:54.996Z,1516724994.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:55.012Z,1516724995.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:55.401Z,1516724995.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:55.419Z,1516724995.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:55.793Z,1516724995.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:55.808Z,1516724995.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:56.190Z,1516724996.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:56.205Z,1516724996.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:56.591Z,1516724996.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:56.613Z,1516724996.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:56.992Z,1516724996.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:57.008Z,1516724997.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:57.372Z,1516724997.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:57.400Z,1516724997.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:57.803Z,1516724997.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:57.825Z,1516724997.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:58.202Z,1516724998.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:58.217Z,1516724998.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:58.595Z,1516724998.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:58.610Z,1516724998.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:58.977Z,1516724998.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:59.009Z,1516724999.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:59.376Z,1516724999.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:59.406Z,1516724999.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:29:59.776Z,1516724999.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:29:59.804Z,1516724999.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:00.177Z,1516725000.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:00.205Z,1516725000.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:00.580Z,1516725000.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:00.614Z,1516725000.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:00.000Z,1516725001.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:01.016Z,1516725001.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:01.405Z,1516725001.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:01.425Z,1516725001.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:01.796Z,1516725001.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:01.812Z,1516725001.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:02.177Z,1516725002.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:02.204Z,1516725002.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:02.577Z,1516725002.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:02.605Z,1516725002.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:02.982Z,1516725002.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:03.009Z,1516725003.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:03.380Z,1516725003.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:03.408Z,1516725003.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:03.798Z,1516725003.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:03.813Z,1516725003.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:04.205Z,1516725004.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:04.225Z,1516725004.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:04.586Z,1516725004.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:04.614Z,1516725004.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:04.977Z,1516725004.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:05.011Z,1516725005.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:05.380Z,1516725005.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:05.414Z,1516725005.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:05.776Z,1516725005.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:05.808Z,1516725005.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:06.174Z,1516725006.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:06.189Z,1516725006.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:06.576Z,1516725006.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:06.617Z,1516725006.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:06.991Z,1516725006.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:07.016Z,1516725007.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:07.391Z,1516725007.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:07.421Z,1516725007.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:07.791Z,1516725007.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:07.817Z,1516725007.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:08.180Z,1516725008.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:08.195Z,1516725008.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:08.578Z,1516725008.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:08.593Z,1516725008.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:08.978Z,1516725008.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:08.993Z,1516725008.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:09.377Z,1516725009.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:09.393Z,1516725009.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:09.791Z,1516725009.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:09.833Z,1516725009.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:10.191Z,1516725010.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:10.206Z,1516725010.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:10.583Z,1516725010.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:10.598Z,1516725010.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:10.983Z,1516725010.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:10.998Z,1516725010.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:11.382Z,1516725011.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:11.397Z,1516725011.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:11.795Z,1516725011.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:11.810Z,1516725011.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:12.187Z,1516725012.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:12.202Z,1516725012.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:12.588Z,1516725012.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:12.603Z,1516725012.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:12.984Z,1516725012.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:12.999Z,1516725012.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:13.386Z,1516725013.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:13.409Z,1516725013.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:13.790Z,1516725013.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:13.805Z,1516725013.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:14.191Z,1516725014.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:14.206Z,1516725014.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:14.591Z,1516725014.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:14.606Z,1516725014.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:14.986Z,1516725014.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:15.001Z,1516725015.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:15.384Z,1516725015.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:15.399Z,1516725015.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:15.795Z,1516725015.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:15.811Z,1516725015.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:16.194Z,1516725016.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:16.209Z,1516725016.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:16.594Z,1516725016.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:16.609Z,1516725016.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:16.986Z,1516725016.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:17.001Z,1516725017.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:17.376Z,1516725017.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:17.409Z,1516725017.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:17.791Z,1516725017.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:17.806Z,1516725017.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:18.199Z,1516725018.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:18.214Z,1516725018.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:18.595Z,1516725018.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:18.610Z,1516725018.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:18.985Z,1516725018.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:19.000Z,1516725019.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:19.390Z,1516725019.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:19.413Z,1516725019.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:19.795Z,1516725019.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:19.811Z,1516725019.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:20.198Z,1516725020.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:20.213Z,1516725020.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:20.596Z,1516725020.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:20.611Z,1516725020.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:20.977Z,1516725020.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:21.005Z,1516725021.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:21.388Z,1516725021.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:21.403Z,1516725021.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:21.796Z,1516725021.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:21.812Z,1516725021.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:22.199Z,1516725022.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:22.221Z,1516725022.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:22.594Z,1516725022.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:22.609Z,1516725022.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:22.991Z,1516725022.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:23.006Z,1516725023.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:23.376Z,1516725023.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:23.409Z,1516725023.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:23.795Z,1516725023.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:23.811Z,1516725023.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:24.200Z,1516725024.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:24.215Z,1516725024.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:24.599Z,1516725024.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:24.614Z,1516725024.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:24.977Z,1516725024.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:25.003Z,1516725025.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:25.377Z,1516725025.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:25.409Z,1516725025.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:25.796Z,1516725025.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:25.811Z,1516725025.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:26.202Z,1516725026.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:26.217Z,1516725026.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:26.597Z,1516725026.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:26.613Z,1516725026.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:26.990Z,1516725026.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:27.006Z,1516725027.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:27.373Z,1516725027.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:27.404Z,1516725027.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:27.793Z,1516725027.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:27.808Z,1516725027.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:28.200Z,1516725028.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:28.216Z,1516725028.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:28.596Z,1516725028.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:28.612Z,1516725028.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:28.978Z,1516725028.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:29.006Z,1516725029.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:29.381Z,1516725029.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:29.413Z,1516725029.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:29.797Z,1516725029.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:29.812Z,1516725029.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:30.201Z,1516725030.201 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:30.216Z,1516725030.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:30.596Z,1516725030.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:30.611Z,1516725030.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:30.977Z,1516725030.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:31.004Z,1516725031.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:31.376Z,1516725031.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:31.405Z,1516725031.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:31.796Z,1516725031.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:31.812Z,1516725031.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:32.200Z,1516725032.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:32.216Z,1516725032.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:32.597Z,1516725032.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:32.612Z,1516725032.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:32.989Z,1516725032.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:33.016Z,1516725033.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:33.377Z,1516725033.377 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:33.408Z,1516725033.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:33.787Z,1516725033.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:33.815Z,1516725033.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:34.187Z,1516725034.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:34.223Z,1516725034.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:34.584Z,1516725034.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:34.619Z,1516725034.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:34.980Z,1516725034.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:34.995Z,1516725034.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:35.381Z,1516725035.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:35.401Z,1516725035.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:35.792Z,1516725035.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:35.827Z,1516725035.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:36.192Z,1516725036.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:36.227Z,1516725036.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:36.584Z,1516725036.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:36.600Z,1516725036.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:36.983Z,1516725036.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:36.999Z,1516725036.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:37.381Z,1516725037.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:37.395Z,1516725037.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:37.795Z,1516725037.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:37.827Z,1516725037.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:38.191Z,1516725038.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:38.206Z,1516725038.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:38.591Z,1516725038.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:38.613Z,1516725038.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:38.986Z,1516725038.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:39.001Z,1516725039.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:39.382Z,1516725039.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:39.397Z,1516725039.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:39.795Z,1516725039.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:39.817Z,1516725039.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:39.843Z,1516725039.843 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T16:30:39.844Z,1516725039.844 [Default:CheckIn:C.Wait] Stopped 2018-01-23T16:30:39.844Z,1516725039.844 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T16:30:39.844Z,1516725039.844 [Default:CheckIn:D] Running Loop=1 2018-01-23T16:30:40.194Z,1516725040.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:40.210Z,1516725040.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:40.213Z,1516725040.213 [Default:CheckIn:D] Stopped 2018-01-23T16:30:40.213Z,1516725040.213 [Default:CheckIn:E] Running Loop=1 2018-01-23T16:30:40.595Z,1516725040.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:40.610Z,1516725040.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:40.613Z,1516725040.613 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 792.802539 min 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn:E] Stopped 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn] Stopped 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn](INFO): Running loop #78 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn] Running Loop=78 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T16:30:40.614Z,1516725040.614 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T16:30:40.992Z,1516725040.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:41.007Z,1516725041.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:44.083Z,1516725044.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:44.099Z,1516725044.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:44.208Z,1516725044.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:44.248Z,1516725044.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:44.556Z,1516725044.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:44.577Z,1516725044.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:44.956Z,1516725044.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:44.971Z,1516725044.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:45.345Z,1516725045.345 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:45.369Z,1516725045.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:45.751Z,1516725045.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:45.773Z,1516725045.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:46.154Z,1516725046.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:46.168Z,1516725046.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:46.549Z,1516725046.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:46.564Z,1516725046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:46.956Z,1516725046.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:46.984Z,1516725046.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:47.363Z,1516725047.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:47.378Z,1516725047.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:47.759Z,1516725047.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:47.774Z,1516725047.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:48.144Z,1516725048.144 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:48.173Z,1516725048.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:48.540Z,1516725048.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:48.569Z,1516725048.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:48.938Z,1516725048.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:48.970Z,1516725048.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:49.341Z,1516725049.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:49.368Z,1516725049.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:49.740Z,1516725049.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:49.775Z,1516725049.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:50.160Z,1516725050.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:50.175Z,1516725050.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:50.568Z,1516725050.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:50.582Z,1516725050.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:50.954Z,1516725050.954 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:50.988Z,1516725050.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:51.338Z,1516725051.338 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:51.365Z,1516725051.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:51.740Z,1516725051.740 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:51.773Z,1516725051.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:52.150Z,1516725052.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:52.177Z,1516725052.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:52.545Z,1516725052.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:52.572Z,1516725052.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:52.956Z,1516725052.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:52.978Z,1516725052.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:53.366Z,1516725053.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:53.380Z,1516725053.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:53.761Z,1516725053.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:53.776Z,1516725053.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:54.139Z,1516725054.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:54.173Z,1516725054.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:54.541Z,1516725054.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:54.576Z,1516725054.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:54.938Z,1516725054.938 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:54.962Z,1516725054.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:55.341Z,1516725055.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:55.369Z,1516725055.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:55.741Z,1516725055.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:55.756Z,1516725055.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:56.152Z,1516725056.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:56.179Z,1516725056.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:56.574Z,1516725056.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:56.589Z,1516725056.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:56.964Z,1516725056.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:56.990Z,1516725056.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:57.341Z,1516725057.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:57.364Z,1516725057.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:57.749Z,1516725057.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:57.769Z,1516725057.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:58.150Z,1516725058.150 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:58.165Z,1516725058.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:58.545Z,1516725058.545 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:58.565Z,1516725058.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:58.967Z,1516725058.967 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:58.998Z,1516725058.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:59.356Z,1516725059.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:59.371Z,1516725059.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:30:59.752Z,1516725059.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:30:59.767Z,1516725059.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:00.146Z,1516725060.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:00.170Z,1516725060.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:00.554Z,1516725060.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:00.569Z,1516725060.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:00.949Z,1516725060.949 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:00.964Z,1516725060.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:01.348Z,1516725061.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:01.368Z,1516725061.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:01.750Z,1516725061.750 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:01.766Z,1516725061.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:02.167Z,1516725062.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:02.182Z,1516725062.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:02.559Z,1516725062.559 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:02.573Z,1516725062.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:02.960Z,1516725062.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:02.975Z,1516725062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:03.348Z,1516725063.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:03.368Z,1516725063.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:03.745Z,1516725063.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:03.777Z,1516725063.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:04.156Z,1516725064.156 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:04.171Z,1516725064.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:04.550Z,1516725064.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:04.565Z,1516725064.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:04.567Z,1516725064.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:04.567Z,1516725064.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 264 2018-01-23T16:31:04.567Z,1516725064.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:31:04.579Z,1516725064.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:31:04.958Z,1516725064.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:04.978Z,1516725064.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:04.999Z,1516725064.999 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:31:04.999Z,1516725064.999 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 264 2018-01-23T16:31:05.361Z,1516725065.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:05.388Z,1516725065.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:05.389Z,1516725065.389 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:31:05.390Z,1516725065.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:31:05.390Z,1516725065.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:31:05.761Z,1516725065.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:05.776Z,1516725065.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:06.140Z,1516725066.140 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:06.173Z,1516725066.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:06.541Z,1516725066.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:06.577Z,1516725066.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:06.944Z,1516725066.944 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:06.977Z,1516725066.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:07.341Z,1516725067.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:07.377Z,1516725067.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:07.744Z,1516725067.744 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:07.784Z,1516725067.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:08.152Z,1516725068.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:08.188Z,1516725068.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:08.573Z,1516725068.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:08.593Z,1516725068.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:08.970Z,1516725068.970 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:08.989Z,1516725068.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:09.341Z,1516725069.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:09.377Z,1516725069.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:09.741Z,1516725069.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:09.776Z,1516725069.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:10.142Z,1516725070.142 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:10.158Z,1516725070.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:10.539Z,1516725070.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:10.561Z,1516725070.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:10.961Z,1516725070.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:10.987Z,1516725070.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:11.360Z,1516725071.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:11.386Z,1516725071.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:11.752Z,1516725071.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:11.776Z,1516725071.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:12.153Z,1516725072.153 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:12.169Z,1516725072.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:12.549Z,1516725072.549 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:12.564Z,1516725072.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:12.946Z,1516725072.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:12.971Z,1516725072.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:13.351Z,1516725073.351 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:13.366Z,1516725073.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:13.749Z,1516725073.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:13.763Z,1516725073.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:14.152Z,1516725074.152 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:14.167Z,1516725074.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:14.556Z,1516725074.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:14.571Z,1516725074.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:14.964Z,1516725074.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:14.978Z,1516725074.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:15.353Z,1516725075.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:15.369Z,1516725075.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:15.755Z,1516725075.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:15.770Z,1516725075.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:16.151Z,1516725076.151 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:16.166Z,1516725076.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:16.553Z,1516725076.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:16.568Z,1516725076.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:16.955Z,1516725076.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:16.970Z,1516725076.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:17.357Z,1516725077.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:17.376Z,1516725077.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:17.377Z,1516725077.377 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 264 2018-01-23T16:31:17.377Z,1516725077.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:31:17.378Z,1516725077.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:17.378Z,1516725077.378 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 264 2018-01-23T16:31:17.379Z,1516725077.379 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:31:17.440Z,1516725077.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:31:17.440Z,1516725077.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:31:17.760Z,1516725077.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:17.786Z,1516725077.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:31:17.786Z,1516725077.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 264 2018-01-23T16:31:17.786Z,1516725077.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:31:17.803Z,1516725077.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 264 2018-01-23T16:31:18.148Z,1516725078.148 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:18.168Z,1516725078.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:31:18.168Z,1516725078.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:31:18.168Z,1516725078.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:31:18.169Z,1516725078.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:31:18.169Z,1516725078.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:31:18.170Z,1516725078.170 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:31:18.548Z,1516725078.548 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:18.590Z,1516725078.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:31:18.591Z,1516725078.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:18.940Z,1516725078.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:18.968Z,1516725078.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:31:18.969Z,1516725078.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:19.341Z,1516725079.341 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:19.377Z,1516725079.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:31:19.378Z,1516725079.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:19.749Z,1516725079.749 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:19.777Z,1516725079.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:31:19.778Z,1516725079.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:20.169Z,1516725080.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:20.188Z,1516725080.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:31:20.189Z,1516725080.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:20.572Z,1516725080.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:20.592Z,1516725080.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:31:20.593Z,1516725080.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:20.964Z,1516725080.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:20.978Z,1516725080.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:31:20.979Z,1516725080.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:21.342Z,1516725081.342 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:21.369Z,1516725081.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:31:21.370Z,1516725081.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:21.741Z,1516725081.741 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:21.772Z,1516725081.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:31:21.773Z,1516725081.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:22.141Z,1516725082.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:22.178Z,1516725082.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:31:22.179Z,1516725082.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:22.541Z,1516725082.541 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:22.576Z,1516725082.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:31:22.577Z,1516725082.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:22.952Z,1516725082.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:22.978Z,1516725082.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:31:22.979Z,1516725082.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:23.369Z,1516725083.369 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:23.383Z,1516725083.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:31:23.384Z,1516725083.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:23.756Z,1516725083.756 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:23.782Z,1516725083.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:31:23.783Z,1516725083.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:24.141Z,1516725084.141 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:24.156Z,1516725084.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:31:24.157Z,1516725084.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:24.540Z,1516725084.540 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:24.555Z,1516725084.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:31:24.556Z,1516725084.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:24.946Z,1516725084.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:24.961Z,1516725084.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:31:24.962Z,1516725084.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:25.346Z,1516725085.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:25.361Z,1516725085.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:31:25.362Z,1516725085.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:25.745Z,1516725085.745 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:25.781Z,1516725085.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:31:25.782Z,1516725085.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:26.158Z,1516725086.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:26.181Z,1516725086.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:31:26.182Z,1516725086.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:26.566Z,1516725086.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:26.581Z,1516725086.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:31:26.581Z,1516725086.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:26.966Z,1516725086.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:26.988Z,1516725086.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:31:26.989Z,1516725086.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:27.357Z,1516725087.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:27.380Z,1516725087.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:31:27.381Z,1516725087.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:27.746Z,1516725087.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:27.815Z,1516725087.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:31:27.816Z,1516725087.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:28.143Z,1516725088.143 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:28.204Z,1516725088.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:31:28.205Z,1516725088.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:28.543Z,1516725088.543 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:28.591Z,1516725088.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:31:28.592Z,1516725088.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:28.969Z,1516725088.969 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:28.997Z,1516725088.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:31:28.998Z,1516725088.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:29.360Z,1516725089.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:29.381Z,1516725089.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:31:29.382Z,1516725089.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:29.789Z,1516725089.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:29.808Z,1516725089.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:31:29.809Z,1516725089.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:30.146Z,1516725090.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:30.173Z,1516725090.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:31:30.174Z,1516725090.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:30.550Z,1516725090.550 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:30.564Z,1516725090.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:31:30.565Z,1516725090.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:30.955Z,1516725090.955 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:30.998Z,1516725090.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:31:31.007Z,1516725091.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:31.357Z,1516725091.357 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:31.380Z,1516725091.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:31:31.381Z,1516725091.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:31.752Z,1516725091.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:31.810Z,1516725091.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:31:31.811Z,1516725091.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:32.159Z,1516725092.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:32.193Z,1516725092.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:31:32.193Z,1516725092.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:32.572Z,1516725092.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:32.590Z,1516725092.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:31:32.595Z,1516725092.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:32.958Z,1516725092.958 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:33.019Z,1516725093.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:31:33.020Z,1516725093.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:33.347Z,1516725093.347 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:33.378Z,1516725093.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:31:33.388Z,1516725093.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:33.759Z,1516725093.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:33.807Z,1516725093.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:31:33.808Z,1516725093.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:34.160Z,1516725094.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:34.245Z,1516725094.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T16:31:34.246Z,1516725094.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:34.551Z,1516725094.551 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:34.570Z,1516725094.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:31:34.595Z,1516725094.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:34.974Z,1516725094.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:35.005Z,1516725095.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:31:35.006Z,1516725095.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:35.365Z,1516725095.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:35.420Z,1516725095.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:31:35.421Z,1516725095.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:35.759Z,1516725095.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:35.801Z,1516725095.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:31:35.802Z,1516725095.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:36.146Z,1516725096.146 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:36.181Z,1516725096.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:31:36.182Z,1516725096.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:36.546Z,1516725096.546 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:36.618Z,1516725096.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:31:36.619Z,1516725096.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:36.946Z,1516725096.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:36.977Z,1516725096.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:31:36.978Z,1516725096.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:37.348Z,1516725097.348 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:37.391Z,1516725097.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:37.746Z,1516725097.746 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:37.808Z,1516725097.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:38.181Z,1516725098.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:38.205Z,1516725098.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:38.566Z,1516725098.566 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:38.601Z,1516725098.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:38.962Z,1516725098.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:39.009Z,1516725099.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:39.356Z,1516725099.356 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:39.399Z,1516725099.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:39.755Z,1516725099.755 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:39.801Z,1516725099.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:40.154Z,1516725100.154 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:40.209Z,1516725100.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:40.575Z,1516725100.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:40.615Z,1516725100.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:40.966Z,1516725100.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:40.990Z,1516725100.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:41.366Z,1516725101.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:41.427Z,1516725101.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:46.765Z,1516725106.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:46.785Z,1516725106.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:46.891Z,1516725106.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:46.922Z,1516725106.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:47.249Z,1516725107.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:47.276Z,1516725107.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:47.649Z,1516725107.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:47.686Z,1516725107.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:48.052Z,1516725108.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:48.079Z,1516725108.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:48.445Z,1516725108.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:48.481Z,1516725108.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:48.842Z,1516725108.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:48.858Z,1516725108.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:49.255Z,1516725109.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:49.295Z,1516725109.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:49.679Z,1516725109.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:49.701Z,1516725109.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:50.056Z,1516725110.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:50.082Z,1516725110.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:50.444Z,1516725110.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:50.459Z,1516725110.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:50.844Z,1516725110.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:50.864Z,1516725110.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:51.251Z,1516725111.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:51.266Z,1516725111.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:51.653Z,1516725111.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:51.689Z,1516725111.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:52.063Z,1516725112.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:52.095Z,1516725112.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:52.459Z,1516725112.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:52.474Z,1516725112.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:52.863Z,1516725112.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:52.895Z,1516725112.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:53.256Z,1516725113.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:53.271Z,1516725113.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:53.654Z,1516725113.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:53.669Z,1516725113.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:54.051Z,1516725114.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:54.066Z,1516725114.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:54.456Z,1516725114.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:54.471Z,1516725114.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:54.852Z,1516725114.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:54.879Z,1516725114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:55.259Z,1516725115.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:55.275Z,1516725115.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:55.659Z,1516725115.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:55.680Z,1516725115.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:56.059Z,1516725116.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:56.081Z,1516725116.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:56.457Z,1516725116.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:56.473Z,1516725116.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:56.857Z,1516725116.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:56.872Z,1516725116.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:57.252Z,1516725117.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:57.273Z,1516725117.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:57.647Z,1516725117.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:57.662Z,1516725117.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:58.063Z,1516725118.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:58.078Z,1516725118.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:58.456Z,1516725118.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:58.471Z,1516725118.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:58.859Z,1516725118.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:58.874Z,1516725118.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:59.248Z,1516725119.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:59.268Z,1516725119.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:31:59.647Z,1516725119.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:31:59.662Z,1516725119.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:00.050Z,1516725120.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:00.065Z,1516725120.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:00.458Z,1516725120.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:00.506Z,1516725120.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:00.844Z,1516725120.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:00.860Z,1516725120.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:01.259Z,1516725121.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:01.274Z,1516725121.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:01.667Z,1516725121.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:01.688Z,1516725121.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:02.055Z,1516725122.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:02.070Z,1516725122.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:02.451Z,1516725122.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:02.470Z,1516725122.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:02.847Z,1516725122.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:02.892Z,1516725122.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:03.249Z,1516725123.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:03.285Z,1516725123.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:03.653Z,1516725123.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:03.684Z,1516725123.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:04.057Z,1516725124.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:04.084Z,1516725124.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:04.456Z,1516725124.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:04.493Z,1516725124.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:04.860Z,1516725124.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:04.885Z,1516725124.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:05.257Z,1516725125.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:05.289Z,1516725125.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:05.643Z,1516725125.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:05.662Z,1516725125.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:06.055Z,1516725126.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:06.092Z,1516725126.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:06.458Z,1516725126.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:06.489Z,1516725126.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:06.849Z,1516725126.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:06.869Z,1516725126.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:07.262Z,1516725127.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:07.297Z,1516725127.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:07.660Z,1516725127.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:07.680Z,1516725127.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:08.056Z,1516725128.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:08.071Z,1516725128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:08.461Z,1516725128.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:08.481Z,1516725128.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:08.860Z,1516725128.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:08.875Z,1516725128.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:09.251Z,1516725129.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:09.275Z,1516725129.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:09.650Z,1516725129.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:09.673Z,1516725129.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:10.075Z,1516725130.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:10.107Z,1516725130.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:10.460Z,1516725130.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:10.481Z,1516725130.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:10.861Z,1516725130.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:10.876Z,1516725130.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:11.249Z,1516725131.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:11.281Z,1516725131.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:11.663Z,1516725131.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:11.679Z,1516725131.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:12.048Z,1516725132.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:12.081Z,1516725132.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:12.452Z,1516725132.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:12.480Z,1516725132.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:12.845Z,1516725132.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:12.877Z,1516725132.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:13.272Z,1516725133.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:13.287Z,1516725133.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:13.664Z,1516725133.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:13.695Z,1516725133.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:14.058Z,1516725134.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:14.085Z,1516725134.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:14.447Z,1516725134.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:14.462Z,1516725134.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:14.848Z,1516725134.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:14.885Z,1516725134.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:15.254Z,1516725135.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:15.297Z,1516725135.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:15.660Z,1516725135.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:15.667Z,1516725135.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x27423 got:0x7234 2018-01-23T16:32:15.699Z,1516725135.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:16.064Z,1516725136.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:16.096Z,1516725136.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:16.472Z,1516725136.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:16.502Z,1516725136.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:16.870Z,1516725136.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:16.901Z,1516725136.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:17.259Z,1516725137.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:17.291Z,1516725137.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:17.652Z,1516725137.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:17.680Z,1516725137.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:18.052Z,1516725138.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:18.075Z,1516725138.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:18.450Z,1516725138.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:18.478Z,1516725138.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:18.853Z,1516725138.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:18.878Z,1516725138.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:19.262Z,1516725139.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:19.277Z,1516725139.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:19.663Z,1516725139.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:19.678Z,1516725139.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:20.059Z,1516725140.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:20.102Z,1516725140.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:20.452Z,1516725140.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:20.462Z,1516725140.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x50483 got:0x6210 2018-01-23T16:32:20.507Z,1516725140.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:20.861Z,1516725140.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:20.869Z,1516725140.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x48175 got:0x16925 2018-01-23T16:32:20.912Z,1516725140.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:21.252Z,1516725141.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:21.272Z,1516725141.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:21.653Z,1516725141.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:21.689Z,1516725141.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:22.065Z,1516725142.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:22.082Z,1516725142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:22.465Z,1516725142.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:22.485Z,1516725142.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:22.869Z,1516725142.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:22.885Z,1516725142.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:23.253Z,1516725143.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:23.293Z,1516725143.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:23.647Z,1516725143.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:23.677Z,1516725143.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:24.064Z,1516725144.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:24.080Z,1516725144.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:24.447Z,1516725144.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:24.483Z,1516725144.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:24.844Z,1516725144.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:24.889Z,1516725144.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:25.269Z,1516725145.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:25.286Z,1516725145.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:25.665Z,1516725145.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:25.689Z,1516725145.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:26.057Z,1516725146.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:26.085Z,1516725146.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:26.448Z,1516725146.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:26.489Z,1516725146.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:26.845Z,1516725146.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:26.881Z,1516725146.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:27.245Z,1516725147.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:27.264Z,1516725147.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:27.655Z,1516725147.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:27.687Z,1516725147.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:28.063Z,1516725148.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:28.098Z,1516725148.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:28.472Z,1516725148.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:28.500Z,1516725148.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:28.865Z,1516725148.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:28.895Z,1516725148.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:29.259Z,1516725149.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:29.274Z,1516725149.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:29.651Z,1516725149.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:29.695Z,1516725149.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:30.049Z,1516725150.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:30.068Z,1516725150.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:30.452Z,1516725150.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:30.478Z,1516725150.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:30.852Z,1516725150.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:30.870Z,1516725150.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:31.258Z,1516725151.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:31.301Z,1516725151.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:31.659Z,1516725151.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:31.676Z,1516725151.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:32.058Z,1516725152.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:32.077Z,1516725152.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:32.452Z,1516725152.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:32.471Z,1516725152.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:32.853Z,1516725152.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:32.868Z,1516725152.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:33.249Z,1516725153.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:33.272Z,1516725153.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:33.657Z,1516725153.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:33.677Z,1516725153.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:34.059Z,1516725154.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:34.080Z,1516725154.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:34.464Z,1516725154.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:34.508Z,1516725154.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:34.858Z,1516725154.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:34.873Z,1516725154.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:35.252Z,1516725155.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:35.273Z,1516725155.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:35.649Z,1516725155.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:35.683Z,1516725155.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:36.056Z,1516725156.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:36.071Z,1516725156.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:36.448Z,1516725156.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:36.475Z,1516725156.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:36.847Z,1516725156.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:36.886Z,1516725156.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:37.269Z,1516725157.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:37.285Z,1516725157.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:37.667Z,1516725157.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:37.713Z,1516725157.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:38.063Z,1516725158.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:38.078Z,1516725158.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:38.444Z,1516725158.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:38.471Z,1516725158.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:38.845Z,1516725158.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:38.886Z,1516725158.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:39.245Z,1516725159.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:39.282Z,1516725159.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:39.645Z,1516725159.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:39.671Z,1516725159.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:40.060Z,1516725160.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:40.089Z,1516725160.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:40.468Z,1516725160.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:40.486Z,1516725160.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:40.863Z,1516725160.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:40.897Z,1516725160.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:41.249Z,1516725161.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:41.276Z,1516725161.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:41.645Z,1516725161.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:41.690Z,1516725161.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:44.762Z,1516725164.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:44.778Z,1516725164.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:44.878Z,1516725164.878 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:44.922Z,1516725164.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:45.231Z,1516725165.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:45.272Z,1516725165.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:45.647Z,1516725165.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:45.673Z,1516725165.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:46.043Z,1516725166.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:46.073Z,1516725166.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:46.428Z,1516725166.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:46.443Z,1516725166.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:46.828Z,1516725166.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:46.842Z,1516725166.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:47.226Z,1516725167.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:47.252Z,1516725167.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:47.628Z,1516725167.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:47.644Z,1516725167.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:48.035Z,1516725168.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:48.053Z,1516725168.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:48.435Z,1516725168.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:48.450Z,1516725168.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:48.834Z,1516725168.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:48.860Z,1516725168.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:49.234Z,1516725169.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:49.248Z,1516725169.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:49.633Z,1516725169.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:49.653Z,1516725169.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:50.028Z,1516725170.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:50.049Z,1516725170.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:50.430Z,1516725170.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:50.453Z,1516725170.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:50.837Z,1516725170.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:50.852Z,1516725170.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:51.238Z,1516725171.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:51.253Z,1516725171.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:51.643Z,1516725171.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:51.658Z,1516725171.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:52.040Z,1516725172.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:52.055Z,1516725172.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:52.437Z,1516725172.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:52.453Z,1516725172.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:52.828Z,1516725172.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:52.859Z,1516725172.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:53.228Z,1516725173.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:53.256Z,1516725173.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:53.632Z,1516725173.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:53.653Z,1516725173.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:54.040Z,1516725174.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:54.061Z,1516725174.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:54.444Z,1516725174.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:54.465Z,1516725174.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:54.840Z,1516725174.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:54.855Z,1516725174.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:55.222Z,1516725175.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:55.261Z,1516725175.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:55.621Z,1516725175.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:55.648Z,1516725175.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:56.032Z,1516725176.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:56.059Z,1516725176.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:56.436Z,1516725176.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:56.469Z,1516725176.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:56.836Z,1516725176.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:56.868Z,1516725176.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:57.228Z,1516725177.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:57.242Z,1516725177.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:57.626Z,1516725177.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:57.662Z,1516725177.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:58.031Z,1516725178.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:58.053Z,1516725178.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:58.436Z,1516725178.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:58.457Z,1516725178.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:58.838Z,1516725178.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:58.854Z,1516725178.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:59.228Z,1516725179.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:59.249Z,1516725179.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:32:59.624Z,1516725179.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:32:59.655Z,1516725179.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:00.041Z,1516725180.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:00.061Z,1516725180.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:00.436Z,1516725180.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:00.465Z,1516725180.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:00.839Z,1516725180.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:00.861Z,1516725180.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:01.238Z,1516725181.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:01.253Z,1516725181.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:01.621Z,1516725181.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:01.647Z,1516725181.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:02.036Z,1516725182.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:02.067Z,1516725182.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:02.443Z,1516725182.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:02.458Z,1516725182.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:02.839Z,1516725182.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:02.854Z,1516725182.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:03.221Z,1516725183.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:03.253Z,1516725183.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:03.620Z,1516725183.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:03.656Z,1516725183.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:04.036Z,1516725184.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:04.066Z,1516725184.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:04.443Z,1516725184.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:04.458Z,1516725184.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:04.839Z,1516725184.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:04.854Z,1516725184.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:05.221Z,1516725185.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:05.253Z,1516725185.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:05.620Z,1516725185.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:05.646Z,1516725185.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:06.038Z,1516725186.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:06.062Z,1516725186.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:06.437Z,1516725186.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:06.464Z,1516725186.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:06.847Z,1516725186.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:06.862Z,1516725186.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:07.221Z,1516725187.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:07.254Z,1516725187.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:07.624Z,1516725187.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:07.650Z,1516725187.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:08.039Z,1516725188.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:08.054Z,1516725188.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:08.444Z,1516725188.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:08.458Z,1516725188.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:08.835Z,1516725188.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:08.858Z,1516725188.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:09.221Z,1516725189.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:09.252Z,1516725189.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:09.620Z,1516725189.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:09.655Z,1516725189.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:10.031Z,1516725190.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:10.057Z,1516725190.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:10.435Z,1516725190.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:10.469Z,1516725190.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:10.838Z,1516725190.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:10.865Z,1516725190.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:11.225Z,1516725191.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:11.257Z,1516725191.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:11.621Z,1516725191.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:11.641Z,1516725191.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:12.039Z,1516725192.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:12.067Z,1516725192.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:12.435Z,1516725192.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:12.466Z,1516725192.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:12.839Z,1516725192.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:12.871Z,1516725192.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:13.233Z,1516725193.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:13.248Z,1516725193.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:13.621Z,1516725193.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:13.641Z,1516725193.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:14.043Z,1516725194.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:14.067Z,1516725194.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:14.443Z,1516725194.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:14.465Z,1516725194.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:14.832Z,1516725194.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:14.846Z,1516725194.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:15.230Z,1516725195.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:15.245Z,1516725195.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:15.629Z,1516725195.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:15.644Z,1516725195.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:16.031Z,1516725196.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:16.046Z,1516725196.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:16.439Z,1516725196.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:16.454Z,1516725196.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:16.842Z,1516725196.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:16.857Z,1516725196.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:17.230Z,1516725197.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:17.245Z,1516725197.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:17.627Z,1516725197.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:17.643Z,1516725197.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:18.031Z,1516725198.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:18.046Z,1516725198.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:18.431Z,1516725198.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:18.446Z,1516725198.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:18.831Z,1516725198.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:18.846Z,1516725198.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:19.229Z,1516725199.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:19.243Z,1516725199.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:19.626Z,1516725199.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:19.668Z,1516725199.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:20.035Z,1516725200.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:20.050Z,1516725200.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:20.447Z,1516725200.447 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:20.462Z,1516725200.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:20.833Z,1516725200.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:20.853Z,1516725200.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:21.228Z,1516725201.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:21.246Z,1516725201.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:21.629Z,1516725201.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:21.644Z,1516725201.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:22.034Z,1516725202.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:22.053Z,1516725202.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:22.439Z,1516725202.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:22.461Z,1516725202.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:22.839Z,1516725202.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:22.854Z,1516725202.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:23.228Z,1516725203.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:23.247Z,1516725203.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:23.624Z,1516725203.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:23.646Z,1516725203.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:24.038Z,1516725204.038 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:24.053Z,1516725204.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:24.435Z,1516725204.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:24.458Z,1516725204.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:24.838Z,1516725204.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:24.853Z,1516725204.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:25.229Z,1516725205.229 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:25.248Z,1516725205.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:25.629Z,1516725205.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:25.655Z,1516725205.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:26.024Z,1516725206.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:26.046Z,1516725206.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:26.439Z,1516725206.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:26.454Z,1516725206.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:26.838Z,1516725206.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:26.853Z,1516725206.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:27.238Z,1516725207.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:27.253Z,1516725207.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:27.630Z,1516725207.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:27.652Z,1516725207.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:28.018Z,1516725208.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:28.045Z,1516725208.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:28.425Z,1516725208.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:28.448Z,1516725208.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:28.830Z,1516725208.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:28.845Z,1516725208.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:29.238Z,1516725209.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:29.262Z,1516725209.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:29.646Z,1516725209.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:29.669Z,1516725209.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:30.044Z,1516725210.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:30.058Z,1516725210.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:30.419Z,1516725210.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:30.446Z,1516725210.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:30.821Z,1516725210.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:30.848Z,1516725210.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:31.221Z,1516725211.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:31.260Z,1516725211.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:31.622Z,1516725211.622 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:31.659Z,1516725211.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:32.025Z,1516725212.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:32.057Z,1516725212.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:32.445Z,1516725212.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:32.460Z,1516725212.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:32.845Z,1516725212.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:32.860Z,1516725212.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:33.239Z,1516725213.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:33.261Z,1516725213.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:33.621Z,1516725213.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:33.650Z,1516725213.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:34.021Z,1516725214.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:34.049Z,1516725214.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:34.421Z,1516725214.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:34.457Z,1516725214.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:34.820Z,1516725214.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:34.836Z,1516725214.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:35.232Z,1516725215.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:35.267Z,1516725215.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:35.640Z,1516725215.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:35.666Z,1516725215.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:36.044Z,1516725216.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:36.070Z,1516725216.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:36.422Z,1516725216.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:36.441Z,1516725216.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:36.832Z,1516725216.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:36.874Z,1516725216.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:37.231Z,1516725217.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:37.245Z,1516725217.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:37.627Z,1516725217.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:37.642Z,1516725217.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:38.026Z,1516725218.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:38.056Z,1516725218.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:38.442Z,1516725218.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:38.479Z,1516725218.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:38.832Z,1516725218.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:38.847Z,1516725218.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:39.232Z,1516725219.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:39.247Z,1516725219.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:39.628Z,1516725219.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:39.649Z,1516725219.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:40.026Z,1516725220.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:40.042Z,1516725220.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:40.426Z,1516725220.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:40.446Z,1516725220.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:40.829Z,1516725220.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:40.844Z,1516725220.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:41.233Z,1516725221.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:41.254Z,1516725221.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:41.643Z,1516725221.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:41.680Z,1516725221.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:42.035Z,1516725222.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:42.057Z,1516725222.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:45.121Z,1516725225.121 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:45.141Z,1516725225.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:45.237Z,1516725225.237 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:45.278Z,1516725225.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:45.607Z,1516725225.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:45.637Z,1516725225.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:46.019Z,1516725226.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:46.033Z,1516725226.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:46.399Z,1516725226.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:46.430Z,1516725226.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:46.792Z,1516725226.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:46.813Z,1516725226.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:47.193Z,1516725227.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:47.208Z,1516725227.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:47.590Z,1516725227.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:47.605Z,1516725227.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:47.993Z,1516725227.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:48.012Z,1516725228.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:48.399Z,1516725228.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:48.414Z,1516725228.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:48.799Z,1516725228.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:48.821Z,1516725228.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:49.198Z,1516725229.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:49.217Z,1516725229.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:49.597Z,1516725229.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:49.611Z,1516725229.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:49.988Z,1516725229.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:50.008Z,1516725230.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:50.388Z,1516725230.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:50.421Z,1516725230.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:50.797Z,1516725230.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:50.812Z,1516725230.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:51.200Z,1516725231.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:51.229Z,1516725231.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:51.606Z,1516725231.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:51.625Z,1516725231.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:52.007Z,1516725232.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:52.021Z,1516725232.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:52.391Z,1516725232.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:52.409Z,1516725232.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:52.787Z,1516725232.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:52.810Z,1516725232.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:53.193Z,1516725233.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:53.212Z,1516725233.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:53.592Z,1516725233.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:53.612Z,1516725233.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:53.992Z,1516725233.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:54.010Z,1516725234.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:54.404Z,1516725234.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:54.418Z,1516725234.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:54.807Z,1516725234.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:54.822Z,1516725234.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:55.200Z,1516725235.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:55.230Z,1516725235.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:55.585Z,1516725235.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:55.612Z,1516725235.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:55.985Z,1516725235.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:56.017Z,1516725236.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:56.401Z,1516725236.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:56.416Z,1516725236.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:56.785Z,1516725236.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:56.820Z,1516725236.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:57.200Z,1516725237.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:57.221Z,1516725237.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:57.607Z,1516725237.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:57.622Z,1516725237.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:58.002Z,1516725238.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:58.029Z,1516725238.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:58.382Z,1516725238.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:58.410Z,1516725238.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:58.789Z,1516725238.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:33:58.815Z,1516725238.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:59.217Z,1516725239.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:33:59.614Z,1516725239.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:00.015Z,1516725240.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:00.419Z,1516725240.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:00.823Z,1516725240.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:01.218Z,1516725241.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:01.613Z,1516725241.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:02.005Z,1516725242.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:02.419Z,1516725242.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:02.820Z,1516725242.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:03.225Z,1516725243.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:03.622Z,1516725243.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:04.028Z,1516725244.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:04.397Z,1516725244.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:04.799Z,1516725244.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:05.199Z,1516725245.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:05.604Z,1516725245.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:05.606Z,1516725245.606 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:05.606Z,1516725245.606 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 265 2018-01-23T16:34:05.607Z,1516725245.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:34:05.639Z,1516725245.639 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:34:06.013Z,1516725246.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:06.049Z,1516725246.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:34:06.049Z,1516725246.049 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 265 2018-01-23T16:34:06.442Z,1516725246.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:06.443Z,1516725246.443 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:34:06.444Z,1516725246.444 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:34:06.444Z,1516725246.444 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:34:06.818Z,1516725246.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:07.222Z,1516725247.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:07.609Z,1516725247.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:08.010Z,1516725248.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:08.421Z,1516725248.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:08.813Z,1516725248.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:09.220Z,1516725249.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:09.630Z,1516725249.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:10.022Z,1516725250.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:10.410Z,1516725250.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:10.820Z,1516725250.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:11.212Z,1516725251.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:11.614Z,1516725251.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:12.010Z,1516725252.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:12.419Z,1516725252.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:12.825Z,1516725252.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:13.217Z,1516725253.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:13.609Z,1516725253.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:14.019Z,1516725254.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:14.411Z,1516725254.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:14.818Z,1516725254.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:15.227Z,1516725255.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:15.622Z,1516725255.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:16.024Z,1516725256.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:16.417Z,1516725256.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:16.813Z,1516725256.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:17.222Z,1516725257.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:17.614Z,1516725257.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:18.017Z,1516725258.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:18.423Z,1516725258.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:18.423Z,1516725258.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 265 2018-01-23T16:34:18.423Z,1516725258.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:34:18.425Z,1516725258.425 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:18.425Z,1516725258.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 265 2018-01-23T16:34:18.425Z,1516725258.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:34:18.438Z,1516725258.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:34:18.438Z,1516725258.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:34:18.843Z,1516725258.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:34:18.843Z,1516725258.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 265 2018-01-23T16:34:18.844Z,1516725258.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:34:18.844Z,1516725258.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 265 2018-01-23T16:34:19.227Z,1516725259.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:34:19.228Z,1516725259.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:34:19.228Z,1516725259.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:34:19.228Z,1516725259.228 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:34:19.229Z,1516725259.229 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:34:19.229Z,1516725259.229 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:34:19.628Z,1516725259.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:34:19.629Z,1516725259.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:19.997Z,1516725259.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:34:19.998Z,1516725259.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:20.399Z,1516725260.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:34:20.400Z,1516725260.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:20.807Z,1516725260.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:34:20.807Z,1516725260.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:21.226Z,1516725261.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:34:21.231Z,1516725261.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:21.629Z,1516725261.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:34:21.630Z,1516725261.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:22.032Z,1516725262.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:34:22.032Z,1516725262.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:22.404Z,1516725262.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:34:22.405Z,1516725262.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:22.811Z,1516725262.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:34:22.812Z,1516725262.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:23.207Z,1516725263.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:34:23.208Z,1516725263.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:23.606Z,1516725263.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:34:23.607Z,1516725263.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:24.009Z,1516725264.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:34:24.010Z,1516725264.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:24.417Z,1516725264.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:34:24.418Z,1516725264.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:24.824Z,1516725264.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:34:24.825Z,1516725264.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:25.217Z,1516725265.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:34:25.218Z,1516725265.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:25.608Z,1516725265.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:34:25.608Z,1516725265.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:26.008Z,1516725266.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:34:26.009Z,1516725266.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:26.417Z,1516725266.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:34:26.418Z,1516725266.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:26.807Z,1516725266.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:34:26.808Z,1516725266.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:27.218Z,1516725267.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:34:27.219Z,1516725267.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:27.620Z,1516725267.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:34:27.621Z,1516725267.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:28.024Z,1516725268.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:34:28.025Z,1516725268.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:28.406Z,1516725268.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:34:28.408Z,1516725268.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:28.817Z,1516725268.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:34:28.818Z,1516725268.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:29.212Z,1516725269.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:34:29.213Z,1516725269.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:29.609Z,1516725269.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:34:29.610Z,1516725269.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:30.008Z,1516725270.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:34:30.009Z,1516725270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:30.417Z,1516725270.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:34:30.419Z,1516725270.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:30.824Z,1516725270.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:34:30.825Z,1516725270.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:31.217Z,1516725271.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:34:31.218Z,1516725271.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:31.612Z,1516725271.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:34:31.613Z,1516725271.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:32.016Z,1516725272.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:34:32.017Z,1516725272.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:32.416Z,1516725272.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:34:32.416Z,1516725272.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:32.825Z,1516725272.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:34:32.826Z,1516725272.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:33.227Z,1516725273.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:34:33.228Z,1516725273.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:33.257Z,1516725273.257 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:34:33.628Z,1516725273.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:34:33.629Z,1516725273.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:34.019Z,1516725274.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:34:34.020Z,1516725274.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:34.408Z,1516725274.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:34:34.409Z,1516725274.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:34.815Z,1516725274.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:34:34.816Z,1516725274.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:35.221Z,1516725275.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:34:35.222Z,1516725275.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:35.615Z,1516725275.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:34:35.616Z,1516725275.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:36.012Z,1516725276.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:34:36.013Z,1516725276.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:36.422Z,1516725276.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:34:36.427Z,1516725276.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:36.832Z,1516725276.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:34:36.833Z,1516725276.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:37.217Z,1516725277.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:34:37.218Z,1516725277.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:37.621Z,1516725277.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:34:37.622Z,1516725277.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:38.016Z,1516725278.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:34:38.017Z,1516725278.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:38.412Z,1516725278.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:34:38.413Z,1516725278.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:38.825Z,1516725278.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:39.224Z,1516725279.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:39.625Z,1516725279.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:40.022Z,1516725280.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:40.404Z,1516725280.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:40.807Z,1516725280.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:41.233Z,1516725281.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:41.633Z,1516725281.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:42.029Z,1516725282.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:42.411Z,1516725282.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:45.505Z,1516725285.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:45.641Z,1516725285.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:46.022Z,1516725286.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:46.415Z,1516725286.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:46.817Z,1516725286.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:47.222Z,1516725287.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:47.608Z,1516725287.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:48.009Z,1516725288.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:48.422Z,1516725288.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:48.829Z,1516725288.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:49.222Z,1516725289.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:49.620Z,1516725289.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:50.007Z,1516725290.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:50.421Z,1516725290.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:50.794Z,1516725290.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:51.222Z,1516725291.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:51.637Z,1516725291.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:52.032Z,1516725292.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:52.400Z,1516725292.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:52.805Z,1516725292.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:53.209Z,1516725293.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:53.610Z,1516725293.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:54.018Z,1516725294.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:54.407Z,1516725294.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:54.807Z,1516725294.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:55.213Z,1516725295.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:55.609Z,1516725295.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:56.009Z,1516725296.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:56.406Z,1516725296.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:56.808Z,1516725296.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:57.217Z,1516725297.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:57.614Z,1516725297.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:58.013Z,1516725298.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:58.405Z,1516725298.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:58.813Z,1516725298.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:59.220Z,1516725299.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:34:59.614Z,1516725299.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:00.017Z,1516725300.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:00.405Z,1516725300.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:00.809Z,1516725300.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:01.213Z,1516725301.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:01.613Z,1516725301.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:02.017Z,1516725302.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:02.411Z,1516725302.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:02.808Z,1516725302.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:03.217Z,1516725303.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:03.614Z,1516725303.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:04.013Z,1516725304.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:04.405Z,1516725304.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:04.806Z,1516725304.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:05.218Z,1516725305.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:05.617Z,1516725305.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:06.013Z,1516725306.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:06.408Z,1516725306.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:06.801Z,1516725306.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:07.210Z,1516725307.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:07.610Z,1516725307.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:08.006Z,1516725308.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:08.402Z,1516725308.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:08.802Z,1516725308.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:09.206Z,1516725309.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:09.610Z,1516725309.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:10.037Z,1516725310.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:10.405Z,1516725310.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:10.804Z,1516725310.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:11.206Z,1516725311.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:11.610Z,1516725311.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:12.010Z,1516725312.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:12.408Z,1516725312.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:12.805Z,1516725312.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:13.208Z,1516725313.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:13.609Z,1516725313.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:14.010Z,1516725314.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:14.413Z,1516725314.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:14.804Z,1516725314.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:15.203Z,1516725315.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:15.612Z,1516725315.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:16.008Z,1516725316.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:16.417Z,1516725316.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:16.814Z,1516725316.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:17.213Z,1516725317.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:17.609Z,1516725317.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:18.004Z,1516725318.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:18.404Z,1516725318.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:18.804Z,1516725318.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:19.206Z,1516725319.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:19.619Z,1516725319.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:20.017Z,1516725320.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:20.414Z,1516725320.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:20.813Z,1516725320.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:21.217Z,1516725321.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:21.611Z,1516725321.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:22.015Z,1516725322.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:22.429Z,1516725322.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:22.825Z,1516725322.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:23.223Z,1516725323.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:23.612Z,1516725323.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:24.012Z,1516725324.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:24.421Z,1516725324.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:24.813Z,1516725324.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:25.212Z,1516725325.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:25.620Z,1516725325.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:26.022Z,1516725326.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:26.426Z,1516725326.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:26.812Z,1516725326.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:27.217Z,1516725327.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:27.619Z,1516725327.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:28.015Z,1516725328.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:28.417Z,1516725328.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:28.821Z,1516725328.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:29.225Z,1516725329.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:29.612Z,1516725329.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:30.012Z,1516725330.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:30.423Z,1516725330.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:30.811Z,1516725330.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:31.215Z,1516725331.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:31.618Z,1516725331.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:32.017Z,1516725332.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:32.429Z,1516725332.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:32.816Z,1516725332.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:33.205Z,1516725333.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:33.615Z,1516725333.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:34.006Z,1516725334.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:34.427Z,1516725334.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:34.829Z,1516725334.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:35.221Z,1516725335.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:35.618Z,1516725335.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:36.023Z,1516725336.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:36.399Z,1516725336.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:36.800Z,1516725336.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:37.209Z,1516725337.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:37.636Z,1516725337.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:38.014Z,1516725338.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:38.438Z,1516725338.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:38.804Z,1516725338.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:39.206Z,1516725339.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:39.612Z,1516725339.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:40.008Z,1516725340.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:40.417Z,1516725340.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:40.814Z,1516725340.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:40.817Z,1516725340.817 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T16:30:40.6Z 2018-01-23T16:35:40.817Z,1516725340.817 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:35:40.817Z,1516725340.817 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:35:41.221Z,1516725341.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:41.845Z,1516725341.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:42.016Z,1516725342.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:45.109Z,1516725345.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:45.198Z,1516725345.198 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0312.lzma 2018-01-23T16:35:45.251Z,1516725345.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:45.599Z,1516725345.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:45.941Z,1516725345.941 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0312.lzma.bak 2018-01-23T16:35:45.941Z,1516725345.941 [DataOverHttps](INFO): SBD MOMSN=7755891 2018-01-23T16:35:46.016Z,1516725346.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:46.650Z,1516725346.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:46.804Z,1516725346.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:49.877Z,1516725349.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:50.017Z,1516725350.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:50.405Z,1516725350.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:50.798Z,1516725350.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:51.197Z,1516725351.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:51.604Z,1516725351.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:55.008Z,1516725355.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:56.202Z,1516725356.202 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0313.lzma 2018-01-23T16:35:56.250Z,1516725356.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:56.396Z,1516725356.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:57.149Z,1516725357.149 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0313.lzma.bak 2018-01-23T16:35:57.149Z,1516725357.149 [DataOverHttps](INFO): SBD MOMSN=7755893 2018-01-23T16:35:57.227Z,1516725357.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:57.609Z,1516725357.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:35:57.612Z,1516725357.612 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:35:57.612Z,1516725357.612 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:35:57.612Z,1516725357.612 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:35:57.752Z,1516725357.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:00.823Z,1516725360.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:00.960Z,1516725360.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:01.325Z,1516725361.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:01.758Z,1516725361.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:02.125Z,1516725362.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:02.525Z,1516725362.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:02.923Z,1516725362.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:03.325Z,1516725363.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:03.726Z,1516725363.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:04.125Z,1516725364.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:04.521Z,1516725364.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:04.919Z,1516725364.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:05.357Z,1516725365.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:05.754Z,1516725365.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:06.125Z,1516725366.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:06.570Z,1516725366.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:06.917Z,1516725366.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:07.325Z,1516725367.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:07.730Z,1516725367.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:08.133Z,1516725368.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:08.525Z,1516725368.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:08.920Z,1516725368.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:09.325Z,1516725369.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:09.726Z,1516725369.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:10.132Z,1516725370.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:10.526Z,1516725370.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:10.925Z,1516725370.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:11.330Z,1516725371.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:11.737Z,1516725371.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:12.134Z,1516725372.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:12.522Z,1516725372.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:12.918Z,1516725372.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:13.339Z,1516725373.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:13.736Z,1516725373.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:14.134Z,1516725374.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:14.524Z,1516725374.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:14.930Z,1516725374.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:15.343Z,1516725375.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:15.750Z,1516725375.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:16.137Z,1516725376.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:16.528Z,1516725376.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:16.923Z,1516725376.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:17.343Z,1516725377.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:17.741Z,1516725377.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:18.142Z,1516725378.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:18.535Z,1516725378.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:18.909Z,1516725378.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:19.334Z,1516725379.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:19.746Z,1516725379.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:20.138Z,1516725380.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:20.541Z,1516725380.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:20.945Z,1516725380.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:21.345Z,1516725381.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:21.752Z,1516725381.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:22.163Z,1516725382.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:22.527Z,1516725382.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:22.937Z,1516725382.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:23.373Z,1516725383.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:23.741Z,1516725383.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:24.141Z,1516725384.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:24.576Z,1516725384.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:24.924Z,1516725384.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:25.331Z,1516725385.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:25.734Z,1516725385.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:26.138Z,1516725386.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:26.528Z,1516725386.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:26.922Z,1516725386.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:27.332Z,1516725387.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:27.737Z,1516725387.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:28.129Z,1516725388.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:28.528Z,1516725388.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:28.921Z,1516725388.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:29.340Z,1516725389.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:29.730Z,1516725389.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:30.137Z,1516725390.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:30.536Z,1516725390.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:30.927Z,1516725390.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:31.328Z,1516725391.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:31.728Z,1516725391.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:32.125Z,1516725392.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:32.538Z,1516725392.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:32.938Z,1516725392.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:33.330Z,1516725393.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:33.729Z,1516725393.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:34.136Z,1516725394.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:34.533Z,1516725394.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:34.936Z,1516725394.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:35.316Z,1516725395.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:35.726Z,1516725395.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:36.190Z,1516725396.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:36.534Z,1516725396.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:36.925Z,1516725396.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:37.346Z,1516725397.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:37.732Z,1516725397.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:38.133Z,1516725398.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:38.535Z,1516725398.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:38.938Z,1516725398.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:39.339Z,1516725399.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:39.733Z,1516725399.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:40.134Z,1516725400.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:40.531Z,1516725400.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:40.928Z,1516725400.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:41.338Z,1516725401.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:41.733Z,1516725401.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:42.153Z,1516725402.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:42.548Z,1516725402.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:42.954Z,1516725402.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:43.360Z,1516725403.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:43.754Z,1516725403.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:44.136Z,1516725404.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:44.566Z,1516725404.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:44.977Z,1516725404.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:45.329Z,1516725405.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:45.731Z,1516725405.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:46.138Z,1516725406.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:46.533Z,1516725406.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:46.929Z,1516725406.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:47.352Z,1516725407.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:47.745Z,1516725407.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:48.139Z,1516725408.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:48.577Z,1516725408.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:48.934Z,1516725408.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:49.336Z,1516725409.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:49.750Z,1516725409.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:50.138Z,1516725410.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:50.565Z,1516725410.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:50.958Z,1516725410.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:51.358Z,1516725411.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:51.766Z,1516725411.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:52.168Z,1516725412.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:52.559Z,1516725412.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:52.957Z,1516725412.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:53.358Z,1516725413.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:53.767Z,1516725413.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:54.169Z,1516725414.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:54.577Z,1516725414.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:54.940Z,1516725414.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:55.330Z,1516725415.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:55.757Z,1516725415.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:56.132Z,1516725416.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:56.545Z,1516725416.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:56.950Z,1516725416.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:57.349Z,1516725417.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:57.756Z,1516725417.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:36:58.166Z,1516725418.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:04.179Z,1516725424.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:04.325Z,1516725424.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:04.681Z,1516725424.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:05.078Z,1516725425.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:05.480Z,1516725425.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:05.881Z,1516725425.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:06.275Z,1516725426.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:06.673Z,1516725426.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:06.676Z,1516725426.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:06.676Z,1516725426.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 266 2018-01-23T16:37:06.676Z,1516725426.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:37:06.704Z,1516725426.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:37:07.079Z,1516725427.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:07.104Z,1516725427.104 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:37:07.104Z,1516725427.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 266 2018-01-23T16:37:07.484Z,1516725427.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:07.486Z,1516725427.486 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:37:07.486Z,1516725427.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:37:07.486Z,1516725427.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:37:07.886Z,1516725427.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:08.281Z,1516725428.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:08.672Z,1516725428.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:09.077Z,1516725429.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:09.477Z,1516725429.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:09.877Z,1516725429.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:10.265Z,1516725430.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:10.684Z,1516725430.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:11.094Z,1516725431.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:11.487Z,1516725431.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:11.869Z,1516725431.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:12.260Z,1516725432.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:12.664Z,1516725432.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:13.061Z,1516725433.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:13.470Z,1516725433.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:13.874Z,1516725433.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:14.274Z,1516725434.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:14.661Z,1516725434.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:15.057Z,1516725435.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:15.469Z,1516725435.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:15.861Z,1516725435.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:16.257Z,1516725436.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:16.674Z,1516725436.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:17.078Z,1516725437.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:17.470Z,1516725437.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:17.899Z,1516725437.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:18.288Z,1516725438.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:18.668Z,1516725438.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:19.079Z,1516725439.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:19.477Z,1516725439.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:19.477Z,1516725439.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 266 2018-01-23T16:37:19.477Z,1516725439.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:37:19.479Z,1516725439.479 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:19.479Z,1516725439.479 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 266 2018-01-23T16:37:19.479Z,1516725439.479 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:37:19.513Z,1516725439.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:37:19.513Z,1516725439.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:37:19.893Z,1516725439.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:37:19.893Z,1516725439.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 266 2018-01-23T16:37:19.893Z,1516725439.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:37:19.893Z,1516725439.893 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 266 2018-01-23T16:37:20.276Z,1516725440.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:37:20.276Z,1516725440.276 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:37:20.277Z,1516725440.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:37:20.277Z,1516725440.277 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:37:20.277Z,1516725440.277 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:37:20.278Z,1516725440.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:37:20.679Z,1516725440.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:37:20.680Z,1516725440.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:21.075Z,1516725441.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:37:21.076Z,1516725441.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:21.475Z,1516725441.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:37:21.476Z,1516725441.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:21.880Z,1516725441.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:37:21.881Z,1516725441.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:22.276Z,1516725442.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:37:22.277Z,1516725442.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:22.688Z,1516725442.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:37:22.689Z,1516725442.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:23.082Z,1516725443.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:37:23.083Z,1516725443.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:23.484Z,1516725443.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:37:23.485Z,1516725443.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:23.876Z,1516725443.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:37:23.877Z,1516725443.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:24.278Z,1516725444.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:37:24.279Z,1516725444.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:24.675Z,1516725444.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:37:24.676Z,1516725444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:25.075Z,1516725445.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:37:25.076Z,1516725445.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:25.485Z,1516725445.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:37:25.486Z,1516725445.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:25.879Z,1516725445.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:37:25.880Z,1516725445.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:26.277Z,1516725446.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:37:26.278Z,1516725446.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:26.680Z,1516725446.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:37:26.681Z,1516725446.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:27.069Z,1516725447.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:37:27.070Z,1516725447.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:27.482Z,1516725447.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:37:27.483Z,1516725447.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:27.888Z,1516725447.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:37:27.889Z,1516725447.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:28.278Z,1516725448.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:37:28.279Z,1516725448.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:28.672Z,1516725448.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:37:28.673Z,1516725448.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:29.081Z,1516725449.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:37:29.082Z,1516725449.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:29.487Z,1516725449.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:37:29.488Z,1516725449.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:29.885Z,1516725449.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:37:29.886Z,1516725449.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:30.288Z,1516725450.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:37:30.289Z,1516725450.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:30.678Z,1516725450.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:37:30.680Z,1516725450.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:31.076Z,1516725451.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:37:31.077Z,1516725451.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:31.483Z,1516725451.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:37:31.483Z,1516725451.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:31.889Z,1516725451.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:37:31.889Z,1516725451.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:32.281Z,1516725452.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:37:32.282Z,1516725452.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:32.688Z,1516725452.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:37:32.689Z,1516725452.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:33.056Z,1516725453.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:37:33.057Z,1516725453.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:33.485Z,1516725453.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:37:33.486Z,1516725453.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:33.893Z,1516725453.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:37:33.894Z,1516725453.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:34.270Z,1516725454.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:37:34.283Z,1516725454.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:34.667Z,1516725454.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:37:34.668Z,1516725454.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:35.066Z,1516725455.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:37:35.067Z,1516725455.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:35.478Z,1516725455.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:37:35.495Z,1516725455.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:35.881Z,1516725455.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:37:35.882Z,1516725455.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:36.272Z,1516725456.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:37:36.273Z,1516725456.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:36.675Z,1516725456.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:37:36.676Z,1516725456.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:37.066Z,1516725457.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:37:37.067Z,1516725457.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:37.477Z,1516725457.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:37:37.478Z,1516725457.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:37.880Z,1516725457.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:37:37.881Z,1516725457.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:38.280Z,1516725458.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:37:38.281Z,1516725458.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:38.672Z,1516725458.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:37:38.673Z,1516725458.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:39.066Z,1516725459.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:37:39.067Z,1516725459.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:39.490Z,1516725459.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:39.881Z,1516725459.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:40.281Z,1516725460.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:40.675Z,1516725460.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:41.079Z,1516725461.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:41.481Z,1516725461.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:41.883Z,1516725461.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:42.293Z,1516725462.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:42.676Z,1516725462.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:43.076Z,1516725463.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:43.488Z,1516725463.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:43.891Z,1516725463.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:44.286Z,1516725464.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:44.682Z,1516725464.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:45.081Z,1516725465.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:45.492Z,1516725465.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:45.885Z,1516725465.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:46.294Z,1516725466.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:46.681Z,1516725466.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:47.084Z,1516725467.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:47.489Z,1516725467.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:47.889Z,1516725467.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:48.282Z,1516725468.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:48.680Z,1516725468.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:49.077Z,1516725469.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:49.489Z,1516725469.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:49.886Z,1516725469.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:50.297Z,1516725470.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:50.665Z,1516725470.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:51.069Z,1516725471.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:51.474Z,1516725471.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:51.873Z,1516725471.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:52.270Z,1516725472.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:52.672Z,1516725472.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:53.079Z,1516725473.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:53.470Z,1516725473.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:53.874Z,1516725473.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:54.280Z,1516725474.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:54.669Z,1516725474.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:55.067Z,1516725475.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:55.470Z,1516725475.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:55.882Z,1516725475.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:56.274Z,1516725476.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:56.668Z,1516725476.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:57.066Z,1516725477.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:57.474Z,1516725477.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:57.873Z,1516725477.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:37:58.281Z,1516725478.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:01.381Z,1516725481.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:01.504Z,1516725481.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:01.907Z,1516725481.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:02.310Z,1516725482.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:02.707Z,1516725482.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:03.078Z,1516725483.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:03.478Z,1516725483.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:03.880Z,1516725483.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:04.285Z,1516725484.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:04.685Z,1516725484.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:05.090Z,1516725485.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:05.489Z,1516725485.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:05.883Z,1516725485.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:06.283Z,1516725486.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:06.680Z,1516725486.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:07.083Z,1516725487.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:07.489Z,1516725487.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:07.886Z,1516725487.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:08.285Z,1516725488.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:08.681Z,1516725488.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:09.084Z,1516725489.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:09.485Z,1516725489.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:09.886Z,1516725489.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:10.289Z,1516725490.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:10.680Z,1516725490.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:11.083Z,1516725491.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:11.489Z,1516725491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:11.886Z,1516725491.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:12.289Z,1516725492.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:12.689Z,1516725492.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:13.080Z,1516725493.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:13.489Z,1516725493.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:13.886Z,1516725493.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:14.285Z,1516725494.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:14.685Z,1516725494.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:15.081Z,1516725495.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:15.480Z,1516725495.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:15.889Z,1516725495.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:16.290Z,1516725496.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:16.685Z,1516725496.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:17.083Z,1516725497.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:17.484Z,1516725497.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:17.885Z,1516725497.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:18.284Z,1516725498.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:18.688Z,1516725498.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:19.098Z,1516725499.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:19.487Z,1516725499.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:19.879Z,1516725499.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:20.280Z,1516725500.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:20.685Z,1516725500.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:21.081Z,1516725501.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:21.481Z,1516725501.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:21.885Z,1516725501.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:22.298Z,1516725502.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:22.691Z,1516725502.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:23.084Z,1516725503.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:23.483Z,1516725503.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:23.888Z,1516725503.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:24.281Z,1516725504.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:24.701Z,1516725504.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:25.096Z,1516725505.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:25.497Z,1516725505.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:25.890Z,1516725505.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:26.282Z,1516725506.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:26.683Z,1516725506.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:27.087Z,1516725507.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:27.485Z,1516725507.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:27.892Z,1516725507.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:28.296Z,1516725508.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:28.695Z,1516725508.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:29.085Z,1516725509.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:29.488Z,1516725509.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:29.884Z,1516725509.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:30.288Z,1516725510.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:30.648Z,1516725510.648 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:38:30.648Z,1516725510.648 [NAL9602] Data Fault, FailCount= 3 2018-01-23T16:38:30.648Z,1516725510.648 [NAL9602](ERROR): Data Fault 2018-01-23T16:38:30.704Z,1516725510.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:30.730Z,1516725510.730 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:38:31.040Z,1516725511.040 [NAL9602](INFO): Powering down 2018-01-23T16:38:31.094Z,1516725511.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:31.487Z,1516725511.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:31.882Z,1516725511.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:31.895Z,1516725511.895 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T16:38:31.895Z,1516725511.895 [NAL9602] No Fault, FailCount= 3 2018-01-23T16:38:32.294Z,1516725512.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:32.691Z,1516725512.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:33.081Z,1516725513.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:33.489Z,1516725513.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:33.887Z,1516725513.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:34.291Z,1516725514.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:34.699Z,1516725514.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:35.087Z,1516725515.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:35.487Z,1516725515.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:35.886Z,1516725515.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:36.276Z,1516725516.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:36.689Z,1516725516.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:37.092Z,1516725517.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:37.479Z,1516725517.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:37.893Z,1516725517.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:38.274Z,1516725518.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:38.680Z,1516725518.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:39.109Z,1516725519.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:39.482Z,1516725519.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:39.878Z,1516725519.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:40.285Z,1516725520.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:40.679Z,1516725520.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:41.078Z,1516725521.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:41.483Z,1516725521.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:41.881Z,1516725521.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:42.278Z,1516725522.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:42.709Z,1516725522.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:43.080Z,1516725523.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:43.478Z,1516725523.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:43.882Z,1516725523.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:44.281Z,1516725524.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:44.689Z,1516725524.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:45.082Z,1516725525.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:45.481Z,1516725525.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:45.881Z,1516725525.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:46.283Z,1516725526.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:46.680Z,1516725526.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:47.080Z,1516725527.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:47.481Z,1516725527.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:47.889Z,1516725527.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:48.272Z,1516725528.272 [PNI_TCM](ERROR): CRC does not match. Expected:0x62938 got:0x33908 2018-01-23T16:38:48.311Z,1516725528.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:48.689Z,1516725528.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:49.083Z,1516725529.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:49.508Z,1516725529.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:49.881Z,1516725529.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:50.282Z,1516725530.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:50.681Z,1516725530.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:51.107Z,1516725531.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:51.474Z,1516725531.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T16:38:51.493Z,1516725531.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:51.881Z,1516725531.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:52.283Z,1516725532.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:52.689Z,1516725532.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:53.083Z,1516725533.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:53.481Z,1516725533.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:53.882Z,1516725533.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:54.293Z,1516725534.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:54.686Z,1516725534.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:55.080Z,1516725535.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:55.480Z,1516725535.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:55.905Z,1516725535.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:56.282Z,1516725536.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:56.681Z,1516725536.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:57.087Z,1516725537.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:57.493Z,1516725537.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:57.885Z,1516725537.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:38:58.287Z,1516725538.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:01.331Z,1516725541.331 [NAL9602](INFO): Powering up NAL9602 2018-01-23T16:39:01.380Z,1516725541.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:01.491Z,1516725541.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:01.881Z,1516725541.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:02.289Z,1516725542.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:02.693Z,1516725542.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:03.083Z,1516725543.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:03.487Z,1516725543.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:03.887Z,1516725543.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:04.279Z,1516725544.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:04.687Z,1516725544.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:05.082Z,1516725545.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:05.477Z,1516725545.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:05.881Z,1516725545.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:06.268Z,1516725546.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:06.685Z,1516725546.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:07.085Z,1516725547.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:07.460Z,1516725547.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:07.893Z,1516725547.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:08.267Z,1516725548.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:08.671Z,1516725548.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:09.074Z,1516725549.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:09.467Z,1516725549.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:09.869Z,1516725549.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:10.269Z,1516725550.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:10.680Z,1516725550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:11.067Z,1516725551.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:11.479Z,1516725551.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:11.901Z,1516725551.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:12.241Z,1516725552.241 [NAL9602](INFO): NAL9602 initialized 2018-01-23T16:39:12.272Z,1516725552.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:12.677Z,1516725552.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:13.080Z,1516725553.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:13.481Z,1516725553.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:13.881Z,1516725553.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:14.272Z,1516725554.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:14.672Z,1516725554.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:15.070Z,1516725555.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:15.472Z,1516725555.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:15.872Z,1516725555.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:16.288Z,1516725556.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:16.680Z,1516725556.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:17.082Z,1516725557.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:17.473Z,1516725557.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:17.871Z,1516725557.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:18.273Z,1516725558.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:18.673Z,1516725558.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:19.088Z,1516725559.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:19.481Z,1516725559.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:19.889Z,1516725559.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:20.275Z,1516725560.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:20.684Z,1516725560.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:21.079Z,1516725561.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:21.484Z,1516725561.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:21.885Z,1516725561.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:22.286Z,1516725562.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:22.695Z,1516725562.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:23.083Z,1516725563.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:23.479Z,1516725563.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:23.883Z,1516725563.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:24.277Z,1516725564.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:24.677Z,1516725564.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:25.083Z,1516725565.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:25.483Z,1516725565.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:25.892Z,1516725565.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:26.284Z,1516725566.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:26.679Z,1516725566.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:27.079Z,1516725567.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:27.485Z,1516725567.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:27.887Z,1516725567.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:28.285Z,1516725568.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:28.705Z,1516725568.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:29.085Z,1516725569.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:29.485Z,1516725569.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:29.864Z,1516725569.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:30.268Z,1516725570.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:30.701Z,1516725570.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:31.097Z,1516725571.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:31.500Z,1516725571.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:31.895Z,1516725571.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:32.301Z,1516725572.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:32.670Z,1516725572.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:33.071Z,1516725573.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:33.477Z,1516725573.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:33.881Z,1516725573.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:34.288Z,1516725574.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:34.686Z,1516725574.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:35.081Z,1516725575.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:35.485Z,1516725575.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:35.877Z,1516725575.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:36.274Z,1516725576.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:36.677Z,1516725576.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:37.093Z,1516725577.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:37.493Z,1516725577.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:37.882Z,1516725577.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:38.286Z,1516725578.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:38.685Z,1516725578.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:39.086Z,1516725579.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:39.491Z,1516725579.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:39.887Z,1516725579.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:40.284Z,1516725580.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:40.687Z,1516725580.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:41.099Z,1516725581.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:41.496Z,1516725581.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:41.900Z,1516725581.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:42.285Z,1516725582.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:42.685Z,1516725582.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:43.100Z,1516725583.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:43.492Z,1516725583.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:43.893Z,1516725583.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:44.299Z,1516725584.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:44.674Z,1516725584.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:45.102Z,1516725585.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:45.503Z,1516725585.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:45.901Z,1516725585.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:46.276Z,1516725586.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:46.672Z,1516725586.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:47.075Z,1516725587.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:47.478Z,1516725587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:47.885Z,1516725587.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:48.281Z,1516725588.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:48.677Z,1516725588.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:49.081Z,1516725589.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:49.485Z,1516725589.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:49.885Z,1516725589.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:50.276Z,1516725590.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:50.675Z,1516725590.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:51.081Z,1516725591.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:51.485Z,1516725591.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:51.881Z,1516725591.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:52.274Z,1516725592.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:52.676Z,1516725592.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:53.085Z,1516725593.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:53.494Z,1516725593.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:53.881Z,1516725593.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:54.273Z,1516725594.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:54.679Z,1516725594.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:55.093Z,1516725595.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:55.486Z,1516725595.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:55.882Z,1516725595.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:56.280Z,1516725596.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:56.681Z,1516725596.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:57.082Z,1516725597.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:57.495Z,1516725597.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:57.886Z,1516725597.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:58.276Z,1516725598.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:39:58.685Z,1516725598.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:01.778Z,1516725601.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:01.929Z,1516725601.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:02.246Z,1516725602.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:02.668Z,1516725602.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:03.041Z,1516725603.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:03.442Z,1516725603.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:03.849Z,1516725603.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:04.253Z,1516725604.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:04.661Z,1516725604.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:05.054Z,1516725605.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:05.443Z,1516725605.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:05.852Z,1516725605.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:06.248Z,1516725606.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:06.645Z,1516725606.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:07.044Z,1516725607.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:07.461Z,1516725607.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:07.858Z,1516725607.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:07.860Z,1516725607.860 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:07.860Z,1516725607.860 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 267 2018-01-23T16:40:07.860Z,1516725607.860 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:40:07.872Z,1516725607.872 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:40:08.261Z,1516725608.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:08.273Z,1516725608.273 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:40:08.273Z,1516725608.273 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 267 2018-01-23T16:40:08.651Z,1516725608.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:08.653Z,1516725608.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:40:08.653Z,1516725608.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:40:08.653Z,1516725608.653 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:40:09.056Z,1516725609.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:09.455Z,1516725609.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:09.848Z,1516725609.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:10.256Z,1516725610.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:10.667Z,1516725610.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:11.058Z,1516725611.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:11.457Z,1516725611.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:11.841Z,1516725611.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:12.265Z,1516725612.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:12.641Z,1516725612.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:13.069Z,1516725613.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:13.474Z,1516725613.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:13.850Z,1516725613.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:14.246Z,1516725614.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:14.652Z,1516725614.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:15.045Z,1516725615.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:15.445Z,1516725615.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:15.845Z,1516725615.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:16.260Z,1516725616.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:16.665Z,1516725616.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:17.065Z,1516725617.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:17.449Z,1516725617.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:17.847Z,1516725617.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:18.256Z,1516725618.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:18.646Z,1516725618.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:19.060Z,1516725619.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:19.461Z,1516725619.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:19.859Z,1516725619.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:20.264Z,1516725620.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:20.648Z,1516725620.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:20.648Z,1516725620.648 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 267 2018-01-23T16:40:20.648Z,1516725620.648 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:40:20.649Z,1516725620.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:20.650Z,1516725620.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 267 2018-01-23T16:40:20.650Z,1516725620.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:40:20.662Z,1516725620.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:40:20.663Z,1516725620.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:40:21.073Z,1516725621.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:40:21.074Z,1516725621.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 267 2018-01-23T16:40:21.074Z,1516725621.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:40:21.074Z,1516725621.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 267 2018-01-23T16:40:21.453Z,1516725621.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:40:21.454Z,1516725621.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:40:21.454Z,1516725621.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:40:21.454Z,1516725621.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:40:21.459Z,1516725621.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:40:21.459Z,1516725621.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:40:21.865Z,1516725621.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:40:21.866Z,1516725621.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:22.264Z,1516725622.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:40:22.265Z,1516725622.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:22.666Z,1516725622.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:40:22.667Z,1516725622.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:23.055Z,1516725623.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:40:23.056Z,1516725623.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:23.449Z,1516725623.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:40:23.450Z,1516725623.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:23.855Z,1516725623.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:40:23.856Z,1516725623.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:24.248Z,1516725624.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:40:24.249Z,1516725624.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:24.651Z,1516725624.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:40:24.652Z,1516725624.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:25.051Z,1516725625.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:40:25.052Z,1516725625.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:25.456Z,1516725625.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:40:25.457Z,1516725625.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:25.856Z,1516725625.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:40:25.857Z,1516725625.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:26.253Z,1516725626.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:40:26.254Z,1516725626.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:26.655Z,1516725626.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:40:26.656Z,1516725626.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:27.048Z,1516725627.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:40:27.049Z,1516725627.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:27.454Z,1516725627.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:40:27.456Z,1516725627.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:27.859Z,1516725627.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:40:27.860Z,1516725627.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:28.261Z,1516725628.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:40:28.262Z,1516725628.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:28.661Z,1516725628.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:40:28.662Z,1516725628.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:29.070Z,1516725629.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:40:29.071Z,1516725629.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:29.452Z,1516725629.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:40:29.453Z,1516725629.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:29.848Z,1516725629.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:40:29.849Z,1516725629.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:30.246Z,1516725630.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:40:30.247Z,1516725630.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:30.651Z,1516725630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:40:30.652Z,1516725630.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:31.048Z,1516725631.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:40:31.049Z,1516725631.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:31.461Z,1516725631.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:40:31.462Z,1516725631.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:31.857Z,1516725631.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:40:31.858Z,1516725631.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:32.268Z,1516725632.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:40:32.269Z,1516725632.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:32.738Z,1516725632.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T16:40:32.739Z,1516725632.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:33.056Z,1516725633.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:40:33.057Z,1516725633.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:33.451Z,1516725633.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:40:33.452Z,1516725633.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:33.848Z,1516725633.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:40:33.849Z,1516725633.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:34.268Z,1516725634.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:40:34.269Z,1516725634.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:34.664Z,1516725634.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:40:34.665Z,1516725634.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:35.054Z,1516725635.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:40:35.055Z,1516725635.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:35.448Z,1516725635.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:40:35.449Z,1516725635.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:35.855Z,1516725635.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:40:35.856Z,1516725635.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:36.246Z,1516725636.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:40:36.247Z,1516725636.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:36.651Z,1516725636.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:40:36.652Z,1516725636.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:37.055Z,1516725637.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:40:37.056Z,1516725637.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:37.464Z,1516725637.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:40:37.465Z,1516725637.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:37.868Z,1516725637.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:40:37.869Z,1516725637.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:38.268Z,1516725638.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:40:38.269Z,1516725638.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:38.651Z,1516725638.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:40:38.652Z,1516725638.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:39.052Z,1516725639.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:40:39.053Z,1516725639.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:39.456Z,1516725639.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:40:39.457Z,1516725639.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:39.854Z,1516725639.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:40:39.855Z,1516725639.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:40.268Z,1516725640.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:40:40.269Z,1516725640.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:40.665Z,1516725640.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:41.062Z,1516725641.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:41.457Z,1516725641.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:41.853Z,1516725641.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:42.253Z,1516725642.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:42.653Z,1516725642.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:43.057Z,1516725643.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:43.468Z,1516725643.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:43.873Z,1516725643.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:44.265Z,1516725644.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:44.657Z,1516725644.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:45.057Z,1516725645.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:45.456Z,1516725645.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:45.862Z,1516725645.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:46.262Z,1516725646.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:46.662Z,1516725646.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:47.065Z,1516725647.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:47.459Z,1516725647.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:47.859Z,1516725647.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:48.265Z,1516725648.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:48.659Z,1516725648.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:49.059Z,1516725649.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:49.465Z,1516725649.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:49.866Z,1516725649.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:50.267Z,1516725650.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:50.621Z,1516725650.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:50.666Z,1516725650.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:51.024Z,1516725651.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:51.060Z,1516725651.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:51.425Z,1516725651.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:51.456Z,1516725651.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:51.825Z,1516725651.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:51.839Z,1516725651.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:52.236Z,1516725652.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:52.261Z,1516725652.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:52.635Z,1516725652.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:52.671Z,1516725652.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:53.031Z,1516725653.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:53.065Z,1516725653.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:53.425Z,1516725653.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:53.465Z,1516725653.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:53.824Z,1516725653.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:40:53.845Z,1516725653.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:54.242Z,1516725654.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:54.648Z,1516725654.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:55.049Z,1516725655.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:55.476Z,1516725655.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:55.874Z,1516725655.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:56.251Z,1516725656.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:56.647Z,1516725656.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:57.047Z,1516725657.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:57.448Z,1516725657.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:57.852Z,1516725657.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:57.855Z,1516725657.855 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T16:40:57.856Z,1516725657.856 [Default:CheckIn:C.Wait] Stopped 2018-01-23T16:40:57.856Z,1516725657.856 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T16:40:57.856Z,1516725657.856 [Default:CheckIn:D] Running Loop=1 2018-01-23T16:40:58.250Z,1516725658.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:58.253Z,1516725658.253 [Default:CheckIn:D] Stopped 2018-01-23T16:40:58.254Z,1516725658.254 [Default:CheckIn:E] Running Loop=1 2018-01-23T16:40:58.651Z,1516725658.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:40:58.654Z,1516725658.654 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 803.103255 min 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn:E] Stopped 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn] Stopped 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn](INFO): Running loop #79 2018-01-23T16:40:58.655Z,1516725658.655 [Default:CheckIn] Running Loop=79 2018-01-23T16:40:58.656Z,1516725658.656 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T16:40:58.656Z,1516725658.656 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T16:40:59.057Z,1516725659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:02.184Z,1516725662.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:02.336Z,1516725662.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:02.653Z,1516725662.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:03.043Z,1516725663.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:03.059Z,1516725663.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:03.442Z,1516725663.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:03.465Z,1516725663.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:03.832Z,1516725663.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:03.850Z,1516725663.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:04.233Z,1516725664.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:04.248Z,1516725664.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:04.632Z,1516725664.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:04.651Z,1516725664.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:05.032Z,1516725665.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:05.051Z,1516725665.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:05.442Z,1516725665.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:05.464Z,1516725665.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:05.846Z,1516725665.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:05.865Z,1516725665.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:06.243Z,1516725666.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:06.257Z,1516725666.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:06.637Z,1516725666.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:06.651Z,1516725666.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:07.029Z,1516725667.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:07.051Z,1516725667.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:07.429Z,1516725667.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:07.451Z,1516725667.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:07.834Z,1516725667.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:07.856Z,1516725667.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:08.246Z,1516725668.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:08.261Z,1516725668.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:08.646Z,1516725668.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:08.665Z,1516725668.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:09.043Z,1516725669.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:09.058Z,1516725669.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:09.425Z,1516725669.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:09.457Z,1516725669.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:09.825Z,1516725669.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:09.857Z,1516725669.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:10.224Z,1516725670.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:10.260Z,1516725670.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:10.637Z,1516725670.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:10.652Z,1516725670.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:11.025Z,1516725671.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:11.052Z,1516725671.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:11.448Z,1516725671.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:11.463Z,1516725671.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:11.846Z,1516725671.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:11.861Z,1516725671.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:12.239Z,1516725672.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:12.261Z,1516725672.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:12.624Z,1516725672.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:12.658Z,1516725672.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:13.029Z,1516725673.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:13.055Z,1516725673.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:13.426Z,1516725673.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:13.457Z,1516725673.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:13.824Z,1516725673.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:13.865Z,1516725673.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:14.247Z,1516725674.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:14.262Z,1516725674.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:14.644Z,1516725674.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:14.678Z,1516725674.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:15.049Z,1516725675.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:15.063Z,1516725675.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:15.429Z,1516725675.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:15.460Z,1516725675.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:15.825Z,1516725675.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:15.856Z,1516725675.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:16.224Z,1516725676.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:16.239Z,1516725676.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:16.626Z,1516725676.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:16.641Z,1516725676.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:17.029Z,1516725677.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:17.044Z,1516725677.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:17.443Z,1516725677.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:17.477Z,1516725677.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:17.843Z,1516725677.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:17.877Z,1516725677.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:18.247Z,1516725678.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:18.271Z,1516725678.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:18.651Z,1516725678.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:19.047Z,1516725679.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:19.448Z,1516725679.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:19.856Z,1516725679.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:20.254Z,1516725680.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:20.675Z,1516725680.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:21.061Z,1516725681.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:21.453Z,1516725681.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:21.848Z,1516725681.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:22.232Z,1516725682.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:22.252Z,1516725682.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:22.632Z,1516725682.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:22.647Z,1516725682.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:23.029Z,1516725683.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:23.056Z,1516725683.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:23.443Z,1516725683.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:23.458Z,1516725683.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:23.846Z,1516725683.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:23.865Z,1516725683.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:24.243Z,1516725684.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:24.257Z,1516725684.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:24.633Z,1516725684.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:24.652Z,1516725684.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:25.032Z,1516725685.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:25.051Z,1516725685.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:25.429Z,1516725685.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:25.452Z,1516725685.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:25.833Z,1516725685.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:25.852Z,1516725685.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:26.246Z,1516725686.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:26.261Z,1516725686.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:26.646Z,1516725686.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:26.661Z,1516725686.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:27.043Z,1516725687.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:27.058Z,1516725687.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:27.427Z,1516725687.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:27.451Z,1516725687.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:27.831Z,1516725687.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:27.846Z,1516725687.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:28.244Z,1516725688.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:28.258Z,1516725688.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:28.646Z,1516725688.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:28.665Z,1516725688.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:29.042Z,1516725689.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:29.057Z,1516725689.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:29.434Z,1516725689.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:29.449Z,1516725689.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:29.837Z,1516725689.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:29.857Z,1516725689.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:30.242Z,1516725690.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:30.257Z,1516725690.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:30.646Z,1516725690.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:30.661Z,1516725690.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:31.043Z,1516725691.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:31.058Z,1516725691.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:31.429Z,1516725691.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:31.452Z,1516725691.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:31.834Z,1516725691.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:31.857Z,1516725691.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:32.247Z,1516725692.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:32.262Z,1516725692.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:32.646Z,1516725692.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:32.661Z,1516725692.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:33.045Z,1516725693.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:33.060Z,1516725693.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:33.429Z,1516725693.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:33.452Z,1516725693.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:33.841Z,1516725693.841 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:33.856Z,1516725693.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:34.245Z,1516725694.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:34.260Z,1516725694.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:34.647Z,1516725694.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:34.662Z,1516725694.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:35.045Z,1516725695.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:35.060Z,1516725695.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:35.437Z,1516725695.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:35.452Z,1516725695.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:35.832Z,1516725695.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:35.854Z,1516725695.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:36.243Z,1516725696.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:36.263Z,1516725696.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:36.649Z,1516725696.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:36.663Z,1516725696.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:37.045Z,1516725697.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:37.065Z,1516725697.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:37.439Z,1516725697.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:37.455Z,1516725697.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:37.834Z,1516725697.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:37.864Z,1516725697.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:38.243Z,1516725698.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:38.266Z,1516725698.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:38.654Z,1516725698.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:38.670Z,1516725698.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:39.049Z,1516725699.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:39.064Z,1516725699.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:39.439Z,1516725699.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:39.454Z,1516725699.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:39.824Z,1516725699.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:39.857Z,1516725699.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:40.244Z,1516725700.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:40.259Z,1516725700.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:40.644Z,1516725700.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:40.666Z,1516725700.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:41.043Z,1516725701.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:41.065Z,1516725701.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:41.425Z,1516725701.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:41.453Z,1516725701.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:41.825Z,1516725701.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:41.851Z,1516725701.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:42.240Z,1516725702.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:42.271Z,1516725702.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:42.647Z,1516725702.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:42.668Z,1516725702.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:43.040Z,1516725703.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:43.062Z,1516725703.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:43.424Z,1516725703.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:43.457Z,1516725703.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:43.824Z,1516725703.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:43.859Z,1516725703.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:44.240Z,1516725704.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:44.270Z,1516725704.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:44.643Z,1516725704.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:44.674Z,1516725704.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:45.044Z,1516725705.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:45.064Z,1516725705.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:45.429Z,1516725705.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:45.456Z,1516725705.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:45.825Z,1516725705.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:45.850Z,1516725705.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:46.242Z,1516725706.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:46.257Z,1516725706.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:46.647Z,1516725706.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:46.662Z,1516725706.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:47.040Z,1516725707.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:47.061Z,1516725707.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:47.425Z,1516725707.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:47.460Z,1516725707.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:47.829Z,1516725707.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:47.855Z,1516725707.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:48.242Z,1516725708.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:48.265Z,1516725708.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:48.647Z,1516725708.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:48.662Z,1516725708.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:49.040Z,1516725709.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:49.070Z,1516725709.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:49.425Z,1516725709.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:49.457Z,1516725709.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:49.824Z,1516725709.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:49.860Z,1516725709.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:50.244Z,1516725710.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:50.259Z,1516725710.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:50.644Z,1516725710.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:50.670Z,1516725710.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:51.045Z,1516725711.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:51.064Z,1516725711.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:51.429Z,1516725711.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:51.456Z,1516725711.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:51.825Z,1516725711.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:51.857Z,1516725711.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:52.238Z,1516725712.238 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:52.266Z,1516725712.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:52.652Z,1516725712.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:52.667Z,1516725712.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:53.035Z,1516725713.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:53.070Z,1516725713.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:53.425Z,1516725713.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:53.469Z,1516725713.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:53.829Z,1516725713.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:53.856Z,1516725713.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:54.235Z,1516725714.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:54.266Z,1516725714.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:54.643Z,1516725714.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:54.667Z,1516725714.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:55.036Z,1516725715.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:55.050Z,1516725715.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:55.433Z,1516725715.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:55.448Z,1516725715.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:55.829Z,1516725715.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:55.844Z,1516725715.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:56.236Z,1516725716.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:56.251Z,1516725716.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:56.642Z,1516725716.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:56.675Z,1516725716.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:57.035Z,1516725717.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:57.056Z,1516725717.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:57.430Z,1516725717.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:57.445Z,1516725717.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:57.833Z,1516725717.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:57.853Z,1516725717.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:58.246Z,1516725718.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:58.281Z,1516725718.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:58.647Z,1516725718.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:58.678Z,1516725718.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:41:59.036Z,1516725719.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:41:59.051Z,1516725719.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:02.125Z,1516725722.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:02.140Z,1516725722.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:02.236Z,1516725722.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:02.251Z,1516725722.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:02.603Z,1516725722.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:02.629Z,1516725722.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:03.024Z,1516725723.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:03.044Z,1516725723.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:03.396Z,1516725723.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:03.433Z,1516725723.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:03.796Z,1516725723.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:03.832Z,1516725723.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:04.188Z,1516725724.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:04.203Z,1516725724.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:04.590Z,1516725724.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:04.605Z,1516725724.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:04.998Z,1516725724.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:05.013Z,1516725725.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:05.407Z,1516725725.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:05.438Z,1516725725.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:05.803Z,1516725725.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:05.818Z,1516725725.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:06.211Z,1516725726.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:06.243Z,1516725726.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:06.599Z,1516725726.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:06.613Z,1516725726.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:06.985Z,1516725726.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:07.005Z,1516725727.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:07.396Z,1516725727.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:07.429Z,1516725727.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:07.786Z,1516725727.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:07.801Z,1516725727.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:08.185Z,1516725728.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:08.201Z,1516725728.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:08.607Z,1516725728.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:08.634Z,1516725728.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:09.007Z,1516725729.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:09.035Z,1516725729.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:09.400Z,1516725729.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:09.435Z,1516725729.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:09.798Z,1516725729.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:09.833Z,1516725729.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:10.197Z,1516725730.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:10.213Z,1516725730.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:10.600Z,1516725730.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:10.621Z,1516725730.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:10.999Z,1516725730.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:11.015Z,1516725731.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:11.402Z,1516725731.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:11.418Z,1516725731.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:11.804Z,1516725731.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:11.819Z,1516725731.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:12.200Z,1516725732.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:12.222Z,1516725732.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:12.603Z,1516725732.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:12.618Z,1516725732.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:12.986Z,1516725732.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:13.020Z,1516725733.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:13.397Z,1516725733.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:13.417Z,1516725733.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:13.798Z,1516725733.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:13.813Z,1516725733.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:14.196Z,1516725734.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:14.211Z,1516725734.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:14.604Z,1516725734.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:14.644Z,1516725734.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:15.009Z,1516725735.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:15.024Z,1516725735.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:15.403Z,1516725735.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:15.431Z,1516725735.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:15.801Z,1516725735.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:15.821Z,1516725735.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:16.183Z,1516725736.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:16.217Z,1516725736.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:16.600Z,1516725736.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:16.608Z,1516725736.608 [PNI_TCM](ERROR): CRC does not match. Expected:0x4871 got:0x6210 2018-01-23T16:42:16.633Z,1516725736.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:16.986Z,1516725736.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:17.025Z,1516725737.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:17.412Z,1516725737.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:17.427Z,1516725737.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:17.814Z,1516725737.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:17.837Z,1516725737.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:18.205Z,1516725738.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:18.225Z,1516725738.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:18.587Z,1516725738.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:18.622Z,1516725738.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:18.985Z,1516725738.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:19.012Z,1516725739.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:19.384Z,1516725739.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:19.428Z,1516725739.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:19.791Z,1516725739.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:19.820Z,1516725739.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:20.184Z,1516725740.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:20.208Z,1516725740.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:20.599Z,1516725740.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:20.634Z,1516725740.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:21.000Z,1516725741.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:21.030Z,1516725741.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:21.397Z,1516725741.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:21.429Z,1516725741.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:21.786Z,1516725741.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:21.802Z,1516725741.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:22.187Z,1516725742.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:22.201Z,1516725742.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:22.593Z,1516725742.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:22.633Z,1516725742.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:22.999Z,1516725742.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:23.007Z,1516725743.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x26372 got:0x44312 2018-01-23T16:42:23.034Z,1516725743.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:23.404Z,1516725743.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:23.437Z,1516725743.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:23.807Z,1516725743.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:23.842Z,1516725743.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:24.208Z,1516725744.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:24.233Z,1516725744.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:24.598Z,1516725744.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:24.614Z,1516725744.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:24.989Z,1516725744.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:25.005Z,1516725745.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:25.398Z,1516725745.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:25.413Z,1516725745.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:25.793Z,1516725745.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:25.818Z,1516725745.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:26.188Z,1516725746.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:26.217Z,1516725746.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:26.608Z,1516725746.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:26.641Z,1516725746.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:26.000Z,1516725747.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:27.020Z,1516725747.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:27.396Z,1516725747.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:27.435Z,1516725747.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:27.792Z,1516725747.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:27.811Z,1516725747.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:28.194Z,1516725748.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:28.210Z,1516725748.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:28.594Z,1516725748.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:28.613Z,1516725748.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:28.990Z,1516725748.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:29.033Z,1516725749.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:29.409Z,1516725749.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:29.445Z,1516725749.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:29.809Z,1516725749.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:29.840Z,1516725749.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:30.197Z,1516725750.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:42:30.212Z,1516725750.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:30.621Z,1516725750.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:31.009Z,1516725751.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:31.410Z,1516725751.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:31.810Z,1516725751.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:32.232Z,1516725752.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:32.614Z,1516725752.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:33.017Z,1516725753.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:33.417Z,1516725753.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:33.836Z,1516725753.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:34.220Z,1516725754.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:34.613Z,1516725754.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:35.012Z,1516725755.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:35.437Z,1516725755.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:35.842Z,1516725755.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:36.214Z,1516725756.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:36.617Z,1516725756.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:37.021Z,1516725757.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:37.409Z,1516725757.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:37.814Z,1516725757.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:38.209Z,1516725758.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:38.610Z,1516725758.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:39.014Z,1516725759.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:39.417Z,1516725759.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:39.811Z,1516725759.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:40.213Z,1516725760.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:40.617Z,1516725760.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:41.014Z,1516725761.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:41.418Z,1516725761.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:41.842Z,1516725761.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:42.222Z,1516725762.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:42.621Z,1516725762.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:43.015Z,1516725763.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:43.416Z,1516725763.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:43.810Z,1516725763.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:44.224Z,1516725764.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:44.628Z,1516725764.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:45.058Z,1516725765.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:45.419Z,1516725765.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:45.810Z,1516725765.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:46.222Z,1516725766.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:46.620Z,1516725766.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:47.019Z,1516725767.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:47.441Z,1516725767.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:47.837Z,1516725767.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:48.229Z,1516725768.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:48.605Z,1516725768.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:49.035Z,1516725769.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:49.415Z,1516725769.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:49.816Z,1516725769.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:50.213Z,1516725770.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:50.645Z,1516725770.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:51.022Z,1516725771.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:51.418Z,1516725771.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:51.810Z,1516725771.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:52.219Z,1516725772.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:52.612Z,1516725772.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:53.018Z,1516725773.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:53.420Z,1516725773.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:53.823Z,1516725773.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:54.232Z,1516725774.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:54.616Z,1516725774.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:55.016Z,1516725775.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:55.413Z,1516725775.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:55.811Z,1516725775.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:56.215Z,1516725776.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:56.618Z,1516725776.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:57.028Z,1516725777.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:57.418Z,1516725777.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:57.813Z,1516725777.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:58.219Z,1516725778.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:58.616Z,1516725778.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:59.009Z,1516725779.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:42:59.422Z,1516725779.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:02.523Z,1516725782.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:02.672Z,1516725782.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:03.009Z,1516725783.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:03.387Z,1516725783.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:03.793Z,1516725783.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:04.189Z,1516725784.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:04.598Z,1516725784.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:04.990Z,1516725784.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:05.398Z,1516725785.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:05.787Z,1516725785.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:06.186Z,1516725786.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:06.589Z,1516725786.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:06.987Z,1516725786.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:07.390Z,1516725787.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:07.794Z,1516725787.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:08.200Z,1516725788.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:08.588Z,1516725788.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:08.987Z,1516725788.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:08.989Z,1516725788.989 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:08.989Z,1516725788.989 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 268 2018-01-23T16:43:08.989Z,1516725788.989 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:43:09.001Z,1516725789.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:43:09.394Z,1516725789.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:09.406Z,1516725789.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:43:09.406Z,1516725789.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 268 2018-01-23T16:43:09.794Z,1516725789.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:09.795Z,1516725789.795 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:43:09.796Z,1516725789.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:43:09.796Z,1516725789.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:43:10.201Z,1516725790.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:10.600Z,1516725790.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:10.985Z,1516725790.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:11.398Z,1516725791.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:11.800Z,1516725791.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:12.202Z,1516725792.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:12.589Z,1516725792.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:12.993Z,1516725792.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:13.397Z,1516725793.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:13.801Z,1516725793.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:14.202Z,1516725794.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:14.591Z,1516725794.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:14.997Z,1516725794.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:15.402Z,1516725795.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:15.801Z,1516725795.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:16.207Z,1516725796.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:16.593Z,1516725796.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:16.996Z,1516725796.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:17.405Z,1516725797.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:17.809Z,1516725797.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:18.202Z,1516725798.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:18.594Z,1516725798.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:19.005Z,1516725799.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:19.400Z,1516725799.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:19.805Z,1516725799.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:20.209Z,1516725800.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:20.597Z,1516725800.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:20.996Z,1516725800.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:21.404Z,1516725801.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:21.803Z,1516725801.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:21.803Z,1516725801.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 268 2018-01-23T16:43:21.803Z,1516725801.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:43:21.805Z,1516725801.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:21.805Z,1516725801.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 268 2018-01-23T16:43:21.805Z,1516725801.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:43:21.818Z,1516725801.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:43:21.818Z,1516725801.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:43:22.224Z,1516725802.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:43:22.224Z,1516725802.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 268 2018-01-23T16:43:22.224Z,1516725802.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:43:22.224Z,1516725802.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 268 2018-01-23T16:43:22.600Z,1516725802.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:43:22.601Z,1516725802.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:43:22.601Z,1516725802.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:43:22.602Z,1516725802.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:43:22.602Z,1516725802.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:43:22.602Z,1516725802.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:43:22.997Z,1516725802.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:43:22.997Z,1516725802.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:23.408Z,1516725803.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:43:23.409Z,1516725803.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:23.816Z,1516725803.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:43:23.817Z,1516725803.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:24.205Z,1516725804.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:43:24.206Z,1516725804.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:24.580Z,1516725804.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:43:24.581Z,1516725804.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:25.009Z,1516725805.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:43:25.010Z,1516725805.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:25.406Z,1516725805.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:43:25.408Z,1516725805.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:25.813Z,1516725805.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:43:25.814Z,1516725805.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:26.216Z,1516725806.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:43:26.217Z,1516725806.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:26.603Z,1516725806.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:43:26.604Z,1516725806.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:26.985Z,1516725806.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:43:26.986Z,1516725806.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:27.398Z,1516725807.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:43:27.412Z,1516725807.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:27.800Z,1516725807.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:43:27.801Z,1516725807.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:28.194Z,1516725808.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:43:28.195Z,1516725808.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:28.590Z,1516725808.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:43:28.591Z,1516725808.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:28.993Z,1516725808.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:43:28.994Z,1516725808.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:29.398Z,1516725809.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:43:29.399Z,1516725809.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:29.798Z,1516725809.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:43:29.799Z,1516725809.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:30.197Z,1516725810.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:43:30.198Z,1516725810.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:30.598Z,1516725810.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:43:30.599Z,1516725810.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:30.988Z,1516725810.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:43:30.989Z,1516725810.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:31.405Z,1516725811.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:43:31.406Z,1516725811.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:31.800Z,1516725811.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:43:31.801Z,1516725811.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:32.209Z,1516725812.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:43:32.210Z,1516725812.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:32.595Z,1516725812.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:43:32.596Z,1516725812.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:33.004Z,1516725813.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:43:33.005Z,1516725813.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:33.401Z,1516725813.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:43:33.402Z,1516725813.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:33.805Z,1516725813.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:43:33.806Z,1516725813.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:34.205Z,1516725814.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:43:34.206Z,1516725814.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:34.608Z,1516725814.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:43:34.609Z,1516725814.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:34.992Z,1516725814.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:43:34.993Z,1516725814.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:35.379Z,1516725815.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:43:35.380Z,1516725815.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:35.779Z,1516725815.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:43:35.780Z,1516725815.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:36.186Z,1516725816.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:43:36.187Z,1516725816.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:36.606Z,1516725816.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:43:36.607Z,1516725816.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:37.010Z,1516725817.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:43:37.011Z,1516725817.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:37.406Z,1516725817.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:43:37.407Z,1516725817.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:37.808Z,1516725817.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:43:37.809Z,1516725817.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:38.184Z,1516725818.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:43:38.185Z,1516725818.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:38.585Z,1516725818.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:43:38.586Z,1516725818.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:38.989Z,1516725818.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:43:38.990Z,1516725818.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:39.384Z,1516725819.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:43:39.385Z,1516725819.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:39.813Z,1516725819.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:43:39.814Z,1516725819.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:40.213Z,1516725820.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:43:40.214Z,1516725820.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:40.617Z,1516725820.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:43:40.618Z,1516725820.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:40.985Z,1516725820.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:43:40.986Z,1516725820.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:41.385Z,1516725821.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:43:41.386Z,1516725821.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:41.785Z,1516725821.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:43:41.786Z,1516725821.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:42.185Z,1516725822.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:42.611Z,1516725822.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:43.012Z,1516725823.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:43.413Z,1516725823.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:43.793Z,1516725823.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:44.184Z,1516725824.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:44.585Z,1516725824.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:44.986Z,1516725824.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:45.388Z,1516725825.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:45.798Z,1516725825.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:46.194Z,1516725826.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:46.600Z,1516725826.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:46.993Z,1516725826.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:47.387Z,1516725827.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:47.788Z,1516725827.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:48.187Z,1516725828.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:48.594Z,1516725828.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:48.993Z,1516725828.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:49.394Z,1516725829.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:49.787Z,1516725829.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:50.188Z,1516725830.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:50.589Z,1516725830.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:50.989Z,1516725830.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:51.388Z,1516725831.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:51.794Z,1516725831.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:52.194Z,1516725832.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:52.600Z,1516725832.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:52.987Z,1516725832.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:53.387Z,1516725833.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:53.788Z,1516725833.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:54.187Z,1516725834.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:54.594Z,1516725834.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:54.993Z,1516725834.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:55.394Z,1516725835.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:55.788Z,1516725835.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:56.187Z,1516725836.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:56.589Z,1516725836.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:56.989Z,1516725836.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:57.391Z,1516725837.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:57.794Z,1516725837.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:58.194Z,1516725838.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:58.600Z,1516725838.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:58.993Z,1516725838.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:59.389Z,1516725839.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:43:59.791Z,1516725839.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:02.891Z,1516725842.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:03.053Z,1516725843.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:03.399Z,1516725843.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:03.794Z,1516725843.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:04.182Z,1516725844.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:04.566Z,1516725844.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:04.969Z,1516725844.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:05.397Z,1516725845.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:05.801Z,1516725845.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:06.203Z,1516725846.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:06.596Z,1516725846.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:06.976Z,1516725846.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:07.372Z,1516725847.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:07.778Z,1516725847.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:08.171Z,1516725848.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:08.574Z,1516725848.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:08.985Z,1516725848.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:09.389Z,1516725849.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:09.773Z,1516725849.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:10.173Z,1516725850.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:10.573Z,1516725850.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:10.974Z,1516725850.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:11.377Z,1516725851.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:11.782Z,1516725851.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:12.182Z,1516725852.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:12.591Z,1516725852.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:12.974Z,1516725852.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:13.380Z,1516725853.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:13.777Z,1516725853.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:14.174Z,1516725854.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:14.582Z,1516725854.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:14.986Z,1516725854.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:15.382Z,1516725855.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:15.782Z,1516725855.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:16.174Z,1516725856.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:16.574Z,1516725856.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:16.980Z,1516725856.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:17.376Z,1516725857.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:17.782Z,1516725857.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:18.188Z,1516725858.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:18.582Z,1516725858.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:18.974Z,1516725858.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:19.373Z,1516725859.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:19.775Z,1516725859.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:20.182Z,1516725860.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:20.583Z,1516725860.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:20.986Z,1516725860.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:21.382Z,1516725861.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:21.782Z,1516725861.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:22.182Z,1516725862.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:22.574Z,1516725862.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:22.973Z,1516725862.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:23.374Z,1516725863.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:23.782Z,1516725863.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:24.185Z,1516725864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:24.583Z,1516725864.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:24.974Z,1516725864.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:25.382Z,1516725865.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:25.777Z,1516725865.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:26.182Z,1516725866.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:26.583Z,1516725866.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:26.993Z,1516725866.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:27.382Z,1516725867.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:27.781Z,1516725867.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:28.177Z,1516725868.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:28.581Z,1516725868.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:28.976Z,1516725868.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:29.373Z,1516725869.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:29.794Z,1516725869.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:30.187Z,1516725870.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:30.589Z,1516725870.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:30.973Z,1516725870.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:31.388Z,1516725871.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:31.784Z,1516725871.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:32.183Z,1516725872.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:32.593Z,1516725872.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:32.991Z,1516725872.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:33.392Z,1516725873.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:33.405Z,1516725873.405 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:44:33.784Z,1516725873.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:34.185Z,1516725874.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:34.584Z,1516725874.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:34.985Z,1516725874.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:35.385Z,1516725875.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:35.794Z,1516725875.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:36.192Z,1516725876.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:36.588Z,1516725876.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:36.984Z,1516725876.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:37.385Z,1516725877.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:37.784Z,1516725877.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:38.184Z,1516725878.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:38.591Z,1516725878.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:38.993Z,1516725878.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:39.385Z,1516725879.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:39.793Z,1516725879.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:40.176Z,1516725880.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:40.575Z,1516725880.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:40.974Z,1516725880.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:41.376Z,1516725881.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:41.801Z,1516725881.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:42.180Z,1516725882.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:42.576Z,1516725882.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:42.974Z,1516725882.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:43.384Z,1516725883.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:43.776Z,1516725883.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:44.174Z,1516725884.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:44.599Z,1516725884.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:44.982Z,1516725884.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:45.388Z,1516725885.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:45.785Z,1516725885.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:46.174Z,1516725886.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:46.585Z,1516725886.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:46.980Z,1516725886.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:47.374Z,1516725887.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:47.785Z,1516725887.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:48.187Z,1516725888.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:48.585Z,1516725888.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:48.980Z,1516725888.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:49.385Z,1516725889.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:49.784Z,1516725889.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:50.181Z,1516725890.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:50.588Z,1516725890.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:50.989Z,1516725890.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:51.385Z,1516725891.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:51.785Z,1516725891.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:52.161Z,1516725892.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:52.585Z,1516725892.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:52.998Z,1516725892.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:53.392Z,1516725893.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:53.789Z,1516725893.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:54.167Z,1516725894.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:54.591Z,1516725894.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:55.005Z,1516725895.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:55.393Z,1516725895.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:55.769Z,1516725895.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:56.173Z,1516725896.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:56.571Z,1516725896.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:56.973Z,1516725896.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:57.377Z,1516725897.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:57.796Z,1516725897.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:58.175Z,1516725898.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:58.581Z,1516725898.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:58.973Z,1516725898.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:59.373Z,1516725899.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:44:59.775Z,1516725899.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:00.173Z,1516725900.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:03.285Z,1516725903.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:03.441Z,1516725903.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:03.793Z,1516725903.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:04.176Z,1516725904.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:04.576Z,1516725904.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:04.977Z,1516725904.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:05.375Z,1516725905.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:05.787Z,1516725905.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:06.185Z,1516725906.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:06.593Z,1516725906.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:06.980Z,1516725906.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:07.385Z,1516725907.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:07.781Z,1516725907.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:08.180Z,1516725908.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:08.588Z,1516725908.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:08.990Z,1516725908.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:09.395Z,1516725909.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:09.789Z,1516725909.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:10.173Z,1516725910.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:10.597Z,1516725910.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:10.992Z,1516725910.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:11.396Z,1516725911.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:11.788Z,1516725911.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:12.189Z,1516725912.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:12.596Z,1516725912.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:12.994Z,1516725912.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:13.389Z,1516725913.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:13.788Z,1516725913.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:14.188Z,1516725914.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:14.598Z,1516725914.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:14.993Z,1516725914.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:15.396Z,1516725915.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:15.789Z,1516725915.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:16.165Z,1516725916.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:16.593Z,1516725916.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:16.998Z,1516725916.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:17.393Z,1516725917.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:17.792Z,1516725917.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:18.197Z,1516725918.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:18.589Z,1516725918.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:19.000Z,1516725919.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:19.391Z,1516725919.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:19.770Z,1516725919.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:20.169Z,1516725920.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:20.603Z,1516725920.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:20.997Z,1516725920.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:21.407Z,1516725921.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:21.774Z,1516725921.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:22.174Z,1516725922.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:22.584Z,1516725922.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:22.982Z,1516725922.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:23.385Z,1516725923.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:23.779Z,1516725923.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:24.177Z,1516725924.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:24.582Z,1516725924.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:24.986Z,1516725924.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:25.382Z,1516725925.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:25.778Z,1516725925.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:26.184Z,1516725926.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:26.585Z,1516725926.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:26.986Z,1516725926.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:27.391Z,1516725927.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:27.777Z,1516725927.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:28.178Z,1516725928.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:28.593Z,1516725928.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:28.991Z,1516725928.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:29.389Z,1516725929.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:29.783Z,1516725929.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:30.188Z,1516725930.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:30.597Z,1516725930.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:30.990Z,1516725930.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:31.392Z,1516725931.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:31.782Z,1516725931.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:32.183Z,1516725932.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:32.597Z,1516725932.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:32.996Z,1516725932.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:33.396Z,1516725933.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:33.789Z,1516725933.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:34.166Z,1516725934.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:34.567Z,1516725934.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:34.998Z,1516725934.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:35.395Z,1516725935.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:35.796Z,1516725935.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:36.172Z,1516725936.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:36.565Z,1516725936.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:36.995Z,1516725936.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:37.372Z,1516725937.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:37.796Z,1516725937.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:38.203Z,1516725938.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:38.604Z,1516725938.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:38.969Z,1516725938.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:39.377Z,1516725939.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:39.775Z,1516725939.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:40.177Z,1516725940.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:40.577Z,1516725940.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:40.000Z,1516725941.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:41.401Z,1516725941.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:41.782Z,1516725941.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:42.175Z,1516725942.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:42.573Z,1516725942.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:42.977Z,1516725942.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:43.386Z,1516725943.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:43.779Z,1516725943.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:44.182Z,1516725944.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:44.578Z,1516725944.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:44.975Z,1516725944.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:45.375Z,1516725945.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:45.783Z,1516725945.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:46.178Z,1516725946.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:46.577Z,1516725946.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:46.989Z,1516725946.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:47.382Z,1516725947.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:47.782Z,1516725947.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:48.177Z,1516725948.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:48.575Z,1516725948.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:48.977Z,1516725948.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:49.409Z,1516725949.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:49.782Z,1516725949.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:50.186Z,1516725950.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:50.583Z,1516725950.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:50.980Z,1516725950.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:51.376Z,1516725951.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:51.776Z,1516725951.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:52.178Z,1516725952.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:52.589Z,1516725952.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:52.993Z,1516725952.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:53.385Z,1516725953.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:53.786Z,1516725953.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:54.189Z,1516725954.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:54.585Z,1516725954.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:54.977Z,1516725954.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:55.381Z,1516725955.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:55.790Z,1516725955.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:56.190Z,1516725956.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:56.588Z,1516725956.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:56.980Z,1516725956.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:57.393Z,1516725957.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:57.788Z,1516725957.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:58.190Z,1516725958.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:58.587Z,1516725958.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:58.994Z,1516725958.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:58.997Z,1516725958.997 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T16:40:58.7Z 2018-01-23T16:45:58.997Z,1516725958.997 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:45:58.997Z,1516725958.997 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:45:59.405Z,1516725959.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:45:59.936Z,1516725959.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:00.194Z,1516725960.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:03.279Z,1516725963.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:03.364Z,1516725963.364 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0316.lzma 2018-01-23T16:46:03.405Z,1516725963.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:03.785Z,1516725963.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:04.107Z,1516725964.107 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0316.lzma.bak 2018-01-23T16:46:04.110Z,1516725964.110 [DataOverHttps](INFO): SBD MOMSN=7755953 2018-01-23T16:46:04.179Z,1516725964.179 [PNI_TCM](ERROR): CRC does not match. Expected:0x60850 got:0x7618 2018-01-23T16:46:04.197Z,1516725964.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:04.802Z,1516725964.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:04.949Z,1516725964.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:08.047Z,1516725968.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:08.161Z,1516725968.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:08.541Z,1516725968.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:08.937Z,1516725968.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:09.340Z,1516725969.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:09.714Z,1516725969.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:12.810Z,1516725972.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:12.812Z,1516725972.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:12.812Z,1516725972.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 269 2018-01-23T16:46:12.812Z,1516725972.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:46:12.856Z,1516725972.856 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:46:12.895Z,1516725972.895 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0317.lzma 2018-01-23T16:46:12.955Z,1516725972.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:12.968Z,1516725972.968 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:46:12.968Z,1516725972.968 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 269 2018-01-23T16:46:13.340Z,1516725973.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:13.341Z,1516725973.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:46:13.342Z,1516725973.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:46:13.342Z,1516725973.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:46:13.678Z,1516725973.678 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0317.lzma.bak 2018-01-23T16:46:13.678Z,1516725973.678 [DataOverHttps](INFO): SBD MOMSN=7755955 2018-01-23T16:46:13.743Z,1516725973.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:14.378Z,1516725974.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:14.397Z,1516725974.397 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:46:14.397Z,1516725974.397 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:46:14.397Z,1516725974.397 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:46:14.541Z,1516725974.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:17.619Z,1516725977.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:17.760Z,1516725977.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:18.114Z,1516725978.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:18.529Z,1516725978.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:18.914Z,1516725978.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:19.311Z,1516725979.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:19.713Z,1516725979.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:20.111Z,1516725980.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:20.511Z,1516725980.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:20.923Z,1516725980.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:21.328Z,1516725981.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:21.721Z,1516725981.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:22.115Z,1516725982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:22.515Z,1516725982.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:22.912Z,1516725982.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:22.912Z,1516725982.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 269 2018-01-23T16:46:22.912Z,1516725982.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:46:22.914Z,1516725982.914 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:22.914Z,1516725982.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 269 2018-01-23T16:46:22.914Z,1516725982.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:46:22.939Z,1516725982.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:46:22.939Z,1516725982.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:46:23.328Z,1516725983.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:46:23.328Z,1516725983.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 269 2018-01-23T16:46:23.328Z,1516725983.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:46:23.328Z,1516725983.328 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 269 2018-01-23T16:46:23.719Z,1516725983.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:46:23.720Z,1516725983.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:46:23.720Z,1516725983.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:46:23.720Z,1516725983.720 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:46:23.721Z,1516725983.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:46:23.721Z,1516725983.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:46:24.128Z,1516725984.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:46:24.129Z,1516725984.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:24.532Z,1516725984.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:46:24.533Z,1516725984.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:24.924Z,1516725984.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:46:24.925Z,1516725984.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:25.300Z,1516725985.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:46:25.301Z,1516725985.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:25.710Z,1516725985.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:46:25.723Z,1516725985.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:26.113Z,1516725986.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:46:26.114Z,1516725986.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:26.630Z,1516725986.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T16:46:26.633Z,1516725986.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:26.904Z,1516725986.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:46:26.905Z,1516725986.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:27.300Z,1516725987.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:46:27.301Z,1516725987.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:27.709Z,1516725987.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:46:27.710Z,1516725987.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:28.133Z,1516725988.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:46:28.134Z,1516725988.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:28.520Z,1516725988.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:46:28.521Z,1516725988.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:28.915Z,1516725988.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:46:28.916Z,1516725988.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:29.312Z,1516725989.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:46:29.313Z,1516725989.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:29.721Z,1516725989.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:46:29.722Z,1516725989.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:30.133Z,1516725990.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:46:30.134Z,1516725990.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:30.510Z,1516725990.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:46:30.512Z,1516725990.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:30.898Z,1516725990.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:46:30.899Z,1516725990.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:31.366Z,1516725991.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T16:46:31.376Z,1516725991.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:31.752Z,1516725991.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:46:31.753Z,1516725991.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:32.140Z,1516725992.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:46:32.141Z,1516725992.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:32.553Z,1516725992.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:46:32.554Z,1516725992.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:32.927Z,1516725992.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:46:32.928Z,1516725992.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:33.340Z,1516725993.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:46:33.341Z,1516725993.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:33.725Z,1516725993.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:46:33.731Z,1516725993.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:34.118Z,1516725994.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:46:34.123Z,1516725994.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:34.525Z,1516725994.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:46:34.526Z,1516725994.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:34.939Z,1516725994.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:46:34.940Z,1516725994.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:35.337Z,1516725995.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:46:35.337Z,1516725995.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:35.754Z,1516725995.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:46:35.759Z,1516725995.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:36.120Z,1516725996.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:46:36.121Z,1516725996.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:36.532Z,1516725996.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:46:36.533Z,1516725996.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:36.914Z,1516725996.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:46:36.935Z,1516725996.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:37.340Z,1516725997.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:46:37.341Z,1516725997.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:37.721Z,1516725997.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:46:37.722Z,1516725997.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:38.109Z,1516725998.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:46:38.110Z,1516725998.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:38.585Z,1516725998.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T16:46:38.586Z,1516725998.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:38.937Z,1516725998.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:46:38.937Z,1516725998.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:39.313Z,1516725999.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:46:39.314Z,1516725999.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:39.742Z,1516725999.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:46:39.768Z,1516725999.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:40.145Z,1516726000.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:46:40.146Z,1516726000.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:40.525Z,1516726000.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:46:40.526Z,1516726000.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:40.936Z,1516726000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:46:40.937Z,1516726000.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:41.316Z,1516726001.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:46:41.317Z,1516726001.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:41.740Z,1516726001.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:46:41.741Z,1516726001.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:42.126Z,1516726002.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:46:42.132Z,1516726002.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:42.541Z,1516726002.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:46:42.542Z,1516726002.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:42.922Z,1516726002.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:43.325Z,1516726003.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:43.766Z,1516726003.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:44.134Z,1516726004.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:44.546Z,1516726004.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:44.953Z,1516726004.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:45.334Z,1516726005.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:45.737Z,1516726005.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:46.139Z,1516726006.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:46.512Z,1516726006.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:46.949Z,1516726006.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:47.350Z,1516726007.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:47.730Z,1516726007.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:48.125Z,1516726008.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:48.577Z,1516726008.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:48.934Z,1516726008.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:49.336Z,1516726009.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:49.745Z,1516726009.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:50.185Z,1516726010.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:50.547Z,1516726010.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:50.937Z,1516726010.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:51.309Z,1516726011.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:51.710Z,1516726011.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:52.108Z,1516726012.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:52.513Z,1516726012.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:52.909Z,1516726012.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:53.303Z,1516726013.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:53.717Z,1516726013.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:54.117Z,1516726014.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:54.520Z,1516726014.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:54.908Z,1516726014.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:55.304Z,1516726015.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:55.713Z,1516726015.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:56.114Z,1516726016.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:56.513Z,1516726016.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:56.908Z,1516726016.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:57.308Z,1516726017.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:57.706Z,1516726017.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:58.113Z,1516726018.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:58.517Z,1516726018.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:58.914Z,1516726018.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:59.304Z,1516726019.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:46:59.702Z,1516726019.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:00.106Z,1516726020.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:00.504Z,1516726020.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:00.913Z,1516726020.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:01.321Z,1516726021.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:01.725Z,1516726021.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:02.113Z,1516726022.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:02.506Z,1516726022.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:02.908Z,1516726022.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:03.305Z,1516726023.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:03.705Z,1516726023.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:04.114Z,1516726024.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:04.521Z,1516726024.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:04.925Z,1516726024.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:05.308Z,1516726025.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:05.708Z,1516726025.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:06.106Z,1516726026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:06.519Z,1516726026.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:06.918Z,1516726026.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:07.317Z,1516726027.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:07.728Z,1516726027.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:08.101Z,1516726028.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:08.502Z,1516726028.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:08.902Z,1516726028.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:09.344Z,1516726029.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:09.709Z,1516726029.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:10.135Z,1516726030.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:10.530Z,1516726030.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:10.909Z,1516726030.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:11.305Z,1516726031.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:11.705Z,1516726031.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:12.131Z,1516726032.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:12.505Z,1516726032.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:12.907Z,1516726032.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:13.318Z,1516726033.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:13.717Z,1516726033.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:14.105Z,1516726034.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:14.506Z,1516726034.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:14.922Z,1516726034.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:18.011Z,1516726038.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:18.164Z,1516726038.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:18.506Z,1516726038.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:18.901Z,1516726038.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:19.278Z,1516726039.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:19.676Z,1516726039.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:20.075Z,1516726040.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:20.476Z,1516726040.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:20.878Z,1516726040.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:21.281Z,1516726041.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:21.678Z,1516726041.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:22.074Z,1516726042.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:22.476Z,1516726042.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:22.881Z,1516726042.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:23.277Z,1516726043.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:23.682Z,1516726043.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:24.085Z,1516726044.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:24.482Z,1516726044.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:24.881Z,1516726044.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:25.278Z,1516726045.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:25.675Z,1516726045.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:26.087Z,1516726046.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:26.474Z,1516726046.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:26.885Z,1516726046.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:27.285Z,1516726047.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:27.685Z,1516726047.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:28.074Z,1516726048.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:28.475Z,1516726048.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:28.875Z,1516726048.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:29.305Z,1516726049.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:29.678Z,1516726049.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:30.082Z,1516726050.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:30.482Z,1516726050.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:30.888Z,1516726050.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:31.285Z,1516726051.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:31.681Z,1516726051.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:32.084Z,1516726052.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:32.485Z,1516726052.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:32.885Z,1516726052.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:33.284Z,1516726053.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:33.682Z,1516726053.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:34.085Z,1516726054.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:34.475Z,1516726054.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:34.874Z,1516726054.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:35.280Z,1516726055.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:35.680Z,1516726055.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:36.085Z,1516726056.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:36.489Z,1516726056.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:36.885Z,1516726056.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:37.285Z,1516726057.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:37.685Z,1516726057.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:38.080Z,1516726058.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:38.476Z,1516726058.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:38.885Z,1516726058.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:39.285Z,1516726059.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:39.685Z,1516726059.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:40.089Z,1516726060.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:40.476Z,1516726060.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:40.876Z,1516726060.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:41.278Z,1516726061.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:41.693Z,1516726061.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:42.090Z,1516726062.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:42.489Z,1516726062.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:42.890Z,1516726062.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:43.278Z,1516726063.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:43.685Z,1516726063.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:44.085Z,1516726064.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:44.482Z,1516726064.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:44.901Z,1516726064.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:45.294Z,1516726065.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:45.690Z,1516726065.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:46.084Z,1516726066.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:46.488Z,1516726066.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:46.899Z,1516726066.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:47.269Z,1516726067.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:47.677Z,1516726067.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:48.100Z,1516726068.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:48.503Z,1516726068.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:48.902Z,1516726068.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:49.269Z,1516726069.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:49.680Z,1516726069.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:50.077Z,1516726070.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:50.477Z,1516726070.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:50.883Z,1516726070.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:51.290Z,1516726071.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:51.707Z,1516726071.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:52.081Z,1516726072.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:52.476Z,1516726072.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:52.875Z,1516726072.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:53.281Z,1516726073.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:53.680Z,1516726073.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:54.085Z,1516726074.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:54.486Z,1516726074.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:54.881Z,1516726074.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:55.274Z,1516726075.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:55.675Z,1516726075.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:56.076Z,1516726076.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:56.474Z,1516726076.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:56.885Z,1516726076.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:57.285Z,1516726077.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:57.685Z,1516726077.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:58.081Z,1516726078.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:58.479Z,1516726078.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:58.881Z,1516726078.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:59.285Z,1516726079.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:47:59.680Z,1516726079.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:00.085Z,1516726080.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:00.486Z,1516726080.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:00.881Z,1516726080.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:01.274Z,1516726081.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:01.682Z,1516726081.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:02.077Z,1516726082.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:02.476Z,1516726082.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:02.893Z,1516726082.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:03.289Z,1516726083.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:03.685Z,1516726083.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:04.077Z,1516726084.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:04.485Z,1516726084.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:04.877Z,1516726084.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:05.287Z,1516726085.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:05.680Z,1516726085.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:06.085Z,1516726086.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:06.489Z,1516726086.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:06.889Z,1516726086.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:07.275Z,1516726087.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:07.678Z,1516726087.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:08.080Z,1516726088.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:08.475Z,1516726088.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:08.885Z,1516726088.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:09.289Z,1516726089.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:09.685Z,1516726089.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:10.078Z,1516726090.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:10.484Z,1516726090.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:10.885Z,1516726090.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:11.293Z,1516726091.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:11.696Z,1516726091.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:12.078Z,1516726092.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:12.477Z,1516726092.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:12.889Z,1516726092.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:13.285Z,1516726093.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:13.685Z,1516726093.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:14.076Z,1516726094.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:14.480Z,1516726094.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:14.886Z,1516726094.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:15.289Z,1516726095.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:18.381Z,1516726098.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:18.520Z,1516726098.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:18.869Z,1516726098.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:19.248Z,1516726099.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:19.677Z,1516726099.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:20.071Z,1516726100.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:20.472Z,1516726100.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:20.876Z,1516726100.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:21.245Z,1516726101.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:21.646Z,1516726101.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:22.053Z,1516726102.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:22.450Z,1516726102.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:22.855Z,1516726102.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:23.256Z,1516726103.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:23.680Z,1516726103.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:24.054Z,1516726104.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:24.447Z,1516726104.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:24.851Z,1516726104.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:25.254Z,1516726105.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:25.651Z,1516726105.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:26.047Z,1516726106.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:26.447Z,1516726106.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:26.851Z,1516726106.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:27.254Z,1516726107.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:27.683Z,1516726107.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:28.101Z,1516726108.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:28.446Z,1516726108.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:28.846Z,1516726108.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:29.250Z,1516726109.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:29.654Z,1516726109.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:30.056Z,1516726110.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:30.445Z,1516726110.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:30.848Z,1516726110.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:31.248Z,1516726111.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:31.648Z,1516726111.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:32.050Z,1516726112.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:32.452Z,1516726112.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:32.862Z,1516726112.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:33.247Z,1516726113.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:33.648Z,1516726113.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:34.046Z,1516726114.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:34.449Z,1516726114.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:34.847Z,1516726114.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:35.257Z,1516726115.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:35.685Z,1516726115.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:36.053Z,1516726116.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:36.446Z,1516726116.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:36.850Z,1516726116.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:37.252Z,1516726117.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:37.657Z,1516726117.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:38.061Z,1516726118.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:38.457Z,1516726118.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:38.861Z,1516726118.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:39.257Z,1516726119.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:39.652Z,1516726119.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:40.045Z,1516726120.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:40.450Z,1516726120.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:40.850Z,1516726120.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:41.259Z,1516726121.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:41.665Z,1516726121.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:42.061Z,1516726122.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:42.457Z,1516726122.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:42.855Z,1516726122.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:43.261Z,1516726123.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:43.661Z,1516726123.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:44.062Z,1516726124.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:44.466Z,1516726124.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:44.862Z,1516726124.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:45.257Z,1516726125.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:45.658Z,1516726125.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:46.037Z,1516726126.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:46.440Z,1516726126.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:46.838Z,1516726126.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:47.262Z,1516726127.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:47.672Z,1516726127.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:48.062Z,1516726128.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:48.445Z,1516726128.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:48.869Z,1516726128.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:49.244Z,1516726129.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:49.649Z,1516726129.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:50.054Z,1516726130.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:50.480Z,1516726130.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:50.877Z,1516726130.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:51.248Z,1516726131.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:51.656Z,1516726131.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:52.049Z,1516726132.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:52.453Z,1516726132.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:52.847Z,1516726132.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:53.250Z,1516726133.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:53.654Z,1516726133.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:54.075Z,1516726134.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:54.445Z,1516726134.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:54.846Z,1516726134.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:55.251Z,1516726135.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:55.655Z,1516726135.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:56.058Z,1516726136.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:56.461Z,1516726136.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:56.854Z,1516726136.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:57.253Z,1516726137.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:57.653Z,1516726137.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:58.045Z,1516726138.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:58.453Z,1516726138.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:58.852Z,1516726138.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:59.256Z,1516726139.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:48:59.684Z,1516726139.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:00.077Z,1516726140.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:00.454Z,1516726140.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:00.858Z,1516726140.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:01.251Z,1516726141.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:01.665Z,1516726141.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:02.073Z,1516726142.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:02.466Z,1516726142.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:02.873Z,1516726142.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:03.257Z,1516726143.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:03.652Z,1516726143.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:04.053Z,1516726144.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:04.460Z,1516726144.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:04.861Z,1516726144.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:05.266Z,1516726145.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:05.662Z,1516726145.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:06.066Z,1516726146.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:06.452Z,1516726146.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:06.861Z,1516726146.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:07.258Z,1516726147.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:07.661Z,1516726147.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:08.071Z,1516726148.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:08.468Z,1516726148.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:08.866Z,1516726148.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:09.265Z,1516726149.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:09.664Z,1516726149.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:10.033Z,1516726150.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x43241 got:0x60741 2018-01-23T16:49:10.065Z,1516726150.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:10.454Z,1516726150.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:10.865Z,1516726150.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:11.263Z,1516726151.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:11.708Z,1516726151.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:12.062Z,1516726152.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:12.441Z,1516726152.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:12.864Z,1516726152.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:13.243Z,1516726153.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:13.669Z,1516726153.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:13.675Z,1516726153.675 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:13.675Z,1516726153.675 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 270 2018-01-23T16:49:13.675Z,1516726153.675 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:49:13.700Z,1516726153.700 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:49:14.017Z,1516726154.017 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:49:14.017Z,1516726154.017 [NAL9602] Data Fault, FailCount= 4 2018-01-23T16:49:14.017Z,1516726154.017 [NAL9602](ERROR): Data Fault 2018-01-23T16:49:14.053Z,1516726154.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:14.090Z,1516726154.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:49:14.090Z,1516726154.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 270 2018-01-23T16:49:14.090Z,1516726154.090 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:49:14.417Z,1516726154.417 [NAL9602](INFO): Powering down 2018-01-23T16:49:14.477Z,1516726154.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:14.478Z,1516726154.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:49:14.479Z,1516726154.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:49:14.479Z,1516726154.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:49:14.842Z,1516726154.842 [PNI_TCM](ERROR): CRC does not match. Expected:0x11944 got:0x49796 2018-01-23T16:49:14.876Z,1516726154.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:15.260Z,1516726155.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:15.293Z,1516726155.293 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T16:49:15.293Z,1516726155.293 [NAL9602] No Fault, FailCount= 4 2018-01-23T16:49:15.653Z,1516726155.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:18.759Z,1516726158.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:18.888Z,1516726158.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:19.278Z,1516726159.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:19.657Z,1516726159.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:20.052Z,1516726160.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:20.461Z,1516726160.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:20.862Z,1516726160.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:21.252Z,1516726161.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:21.656Z,1516726161.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:22.052Z,1516726162.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:22.480Z,1516726162.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:22.855Z,1516726162.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:23.252Z,1516726163.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:23.652Z,1516726163.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:24.077Z,1516726164.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:24.077Z,1516726164.077 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 270 2018-01-23T16:49:24.077Z,1516726164.077 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:49:24.079Z,1516726164.079 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:24.080Z,1516726164.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 270 2018-01-23T16:49:24.080Z,1516726164.080 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:49:24.092Z,1516726164.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:49:24.092Z,1516726164.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:49:24.465Z,1516726164.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:49:24.465Z,1516726164.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 270 2018-01-23T16:49:24.465Z,1516726164.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:49:24.465Z,1516726164.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 270 2018-01-23T16:49:24.853Z,1516726164.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:49:24.853Z,1516726164.853 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:49:24.854Z,1516726164.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:49:24.854Z,1516726164.854 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:49:24.855Z,1516726164.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:49:24.855Z,1516726164.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:49:25.260Z,1516726165.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:49:25.260Z,1516726165.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:25.669Z,1516726165.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:49:25.670Z,1516726165.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:26.049Z,1516726166.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:49:26.051Z,1516726166.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:26.452Z,1516726166.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:49:26.453Z,1516726166.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:26.852Z,1516726166.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:49:26.853Z,1516726166.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:27.268Z,1516726167.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:49:27.269Z,1516726167.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:27.658Z,1516726167.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:49:27.659Z,1516726167.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:28.053Z,1516726168.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:49:28.054Z,1516726168.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:28.450Z,1516726168.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:49:28.451Z,1516726168.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:28.882Z,1516726168.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:49:28.883Z,1516726168.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:29.258Z,1516726169.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:49:29.259Z,1516726169.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:29.654Z,1516726169.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:49:29.655Z,1516726169.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:30.055Z,1516726170.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:49:30.056Z,1516726170.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:30.460Z,1516726170.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:49:30.461Z,1516726170.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:30.850Z,1516726170.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:49:30.851Z,1516726170.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:31.264Z,1516726171.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:49:31.265Z,1516726171.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:31.657Z,1516726171.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:49:31.658Z,1516726171.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:32.064Z,1516726172.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:49:32.066Z,1516726172.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:32.454Z,1516726172.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:49:32.456Z,1516726172.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:32.853Z,1516726172.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:49:32.854Z,1516726172.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:33.257Z,1516726173.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:49:33.258Z,1516726173.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:33.661Z,1516726173.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:49:33.662Z,1516726173.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:34.052Z,1516726174.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:49:34.053Z,1516726174.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:34.459Z,1516726174.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:49:34.460Z,1516726174.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:34.860Z,1516726174.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:49:34.861Z,1516726174.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:35.260Z,1516726175.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:49:35.261Z,1516726175.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:35.648Z,1516726175.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:49:35.649Z,1516726175.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:36.063Z,1516726176.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:49:36.064Z,1516726176.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:36.463Z,1516726176.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:49:36.464Z,1516726176.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:36.842Z,1516726176.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:49:36.843Z,1516726176.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:37.276Z,1516726177.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:49:37.277Z,1516726177.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:37.662Z,1516726177.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:49:37.663Z,1516726177.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:38.056Z,1516726178.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:49:38.057Z,1516726178.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:38.455Z,1516726178.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:49:38.456Z,1516726178.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:38.860Z,1516726178.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:49:38.861Z,1516726178.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:39.251Z,1516726179.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:49:39.252Z,1516726179.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:39.664Z,1516726179.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:49:39.665Z,1516726179.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:40.052Z,1516726180.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:49:40.053Z,1516726180.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:40.458Z,1516726180.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:49:40.463Z,1516726180.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:40.855Z,1516726180.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:49:40.856Z,1516726180.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:41.267Z,1516726181.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:49:41.268Z,1516726181.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:41.656Z,1516726181.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:49:41.657Z,1516726181.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:42.062Z,1516726182.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:49:42.064Z,1516726182.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:42.452Z,1516726182.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:49:42.453Z,1516726182.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:42.852Z,1516726182.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:49:42.854Z,1516726182.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:43.259Z,1516726183.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:49:43.260Z,1516726183.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:43.664Z,1516726183.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:49:43.665Z,1516726183.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:44.058Z,1516726184.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:49:44.059Z,1516726184.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:44.451Z,1516726184.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:44.812Z,1516726184.812 [NAL9602](INFO): Powering up NAL9602 2018-01-23T16:49:44.863Z,1516726184.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:45.248Z,1516726185.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:45.663Z,1516726185.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:46.062Z,1516726186.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:46.457Z,1516726186.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:46.862Z,1516726186.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:47.261Z,1516726187.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:47.656Z,1516726187.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:48.057Z,1516726188.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:48.442Z,1516726188.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:48.843Z,1516726188.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:49.242Z,1516726189.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:49.647Z,1516726189.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:50.046Z,1516726190.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:50.449Z,1516726190.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:50.847Z,1516726190.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:51.243Z,1516726191.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:51.654Z,1516726191.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:52.043Z,1516726192.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:52.447Z,1516726192.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:52.854Z,1516726192.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:53.243Z,1516726193.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:53.647Z,1516726193.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:54.047Z,1516726194.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:54.446Z,1516726194.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:54.847Z,1516726194.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:55.268Z,1516726195.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:55.616Z,1516726195.616 [NAL9602](INFO): NAL9602 initialized 2018-01-23T16:49:55.665Z,1516726195.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:56.051Z,1516726196.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:56.462Z,1516726196.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:56.865Z,1516726196.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:57.261Z,1516726197.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:57.653Z,1516726197.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:58.054Z,1516726198.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:58.452Z,1516726198.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:58.863Z,1516726198.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:59.265Z,1516726199.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:49:59.669Z,1516726199.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:00.061Z,1516726200.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:00.454Z,1516726200.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:00.851Z,1516726200.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:01.260Z,1516726201.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:01.666Z,1516726201.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:02.065Z,1516726202.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:02.459Z,1516726202.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:02.853Z,1516726202.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:03.259Z,1516726203.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:03.665Z,1516726203.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:04.054Z,1516726204.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:04.459Z,1516726204.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:04.863Z,1516726204.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:05.269Z,1516726205.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:05.665Z,1516726205.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:06.059Z,1516726206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:06.460Z,1516726206.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:06.859Z,1516726206.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:07.260Z,1516726207.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:07.666Z,1516726207.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:08.069Z,1516726208.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:08.468Z,1516726208.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:08.864Z,1516726208.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:09.259Z,1516726209.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:09.671Z,1516726209.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:10.064Z,1516726210.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:10.443Z,1516726210.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:10.873Z,1516726210.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:11.273Z,1516726211.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:11.673Z,1516726211.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:12.073Z,1516726212.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:12.448Z,1516726212.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:12.852Z,1516726212.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:13.250Z,1516726213.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:13.678Z,1516726213.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:14.082Z,1516726214.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:14.480Z,1516726214.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:14.860Z,1516726214.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:15.253Z,1516726215.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:15.659Z,1516726215.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:18.757Z,1516726218.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:18.889Z,1516726218.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:19.265Z,1516726219.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:19.661Z,1516726219.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:20.055Z,1516726220.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:20.448Z,1516726220.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:20.853Z,1516726220.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:21.246Z,1516726221.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:21.655Z,1516726221.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:22.065Z,1516726222.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:22.455Z,1516726222.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:22.851Z,1516726222.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:23.247Z,1516726223.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:23.654Z,1516726223.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:24.045Z,1516726224.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:24.454Z,1516726224.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:24.854Z,1516726224.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:25.257Z,1516726225.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:25.656Z,1516726225.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:26.051Z,1516726226.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:26.457Z,1516726226.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:26.847Z,1516726226.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:27.251Z,1516726227.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:27.658Z,1516726227.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:28.058Z,1516726228.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:28.458Z,1516726228.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:28.849Z,1516726228.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:29.246Z,1516726229.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:29.649Z,1516726229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:30.051Z,1516726230.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:30.452Z,1516726230.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:30.858Z,1516726230.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:31.257Z,1516726231.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:31.665Z,1516726231.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:32.053Z,1516726232.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:32.449Z,1516726232.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:32.855Z,1516726232.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:33.249Z,1516726233.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:33.654Z,1516726233.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:34.064Z,1516726234.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:34.454Z,1516726234.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:34.853Z,1516726234.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:35.252Z,1516726235.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:35.657Z,1516726235.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:36.051Z,1516726236.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:36.451Z,1516726236.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:36.854Z,1516726236.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:37.258Z,1516726237.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:37.665Z,1516726237.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:38.053Z,1516726238.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:38.449Z,1516726238.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:38.853Z,1516726238.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:39.253Z,1516726239.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:39.654Z,1516726239.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:40.064Z,1516726240.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:40.454Z,1516726240.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:40.849Z,1516726240.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:41.246Z,1516726241.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:41.649Z,1516726241.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:42.053Z,1516726242.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:42.450Z,1516726242.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:42.858Z,1516726242.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:43.259Z,1516726243.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:43.660Z,1516726243.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:44.053Z,1516726244.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:44.453Z,1516726244.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:44.859Z,1516726244.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:45.255Z,1516726245.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:45.663Z,1516726245.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:46.059Z,1516726246.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:46.462Z,1516726246.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:46.855Z,1516726246.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:47.256Z,1516726247.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:47.647Z,1516726247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:48.045Z,1516726248.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:48.444Z,1516726248.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:48.853Z,1516726248.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:49.250Z,1516726249.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:49.649Z,1516726249.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:50.047Z,1516726250.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:50.442Z,1516726250.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:50.852Z,1516726250.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:51.245Z,1516726251.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:51.650Z,1516726251.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:52.053Z,1516726252.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:52.450Z,1516726252.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:52.844Z,1516726252.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:53.246Z,1516726253.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:53.644Z,1516726253.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:54.050Z,1516726254.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:54.446Z,1516726254.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:54.850Z,1516726254.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:55.250Z,1516726255.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:55.652Z,1516726255.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:56.048Z,1516726256.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:56.450Z,1516726256.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:56.852Z,1516726256.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:57.245Z,1516726257.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:57.650Z,1516726257.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:58.056Z,1516726258.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:58.450Z,1516726258.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:58.844Z,1516726258.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:59.252Z,1516726259.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:50:59.649Z,1516726259.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:00.046Z,1516726260.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:00.444Z,1516726260.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:00.854Z,1516726260.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:01.257Z,1516726261.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:01.655Z,1516726261.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:02.045Z,1516726262.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:02.446Z,1516726262.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:02.848Z,1516726262.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:03.249Z,1516726263.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:03.657Z,1516726263.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:04.058Z,1516726264.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:04.457Z,1516726264.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:04.849Z,1516726264.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:05.253Z,1516726265.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:05.653Z,1516726265.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:06.047Z,1516726266.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:06.455Z,1516726266.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:06.854Z,1516726266.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:07.257Z,1516726267.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:07.658Z,1516726267.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:08.041Z,1516726268.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:08.449Z,1516726268.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:08.855Z,1516726268.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:09.251Z,1516726269.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:09.670Z,1516726269.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:10.062Z,1516726270.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:10.455Z,1516726270.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:10.852Z,1516726270.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:11.254Z,1516726271.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:11.658Z,1516726271.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:12.058Z,1516726272.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:12.453Z,1516726272.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:12.849Z,1516726272.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:13.251Z,1516726273.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:13.657Z,1516726273.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:14.055Z,1516726274.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:14.464Z,1516726274.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:14.847Z,1516726274.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:14.850Z,1516726274.850 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T16:51:14.850Z,1516726274.850 [Default:CheckIn:C.Wait] Stopped 2018-01-23T16:51:14.850Z,1516726274.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T16:51:14.850Z,1516726274.850 [Default:CheckIn:D] Running Loop=1 2018-01-23T16:51:15.252Z,1516726275.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:15.255Z,1516726275.255 [Default:CheckIn:D] Stopped 2018-01-23T16:51:15.255Z,1516726275.255 [Default:CheckIn:E] Running Loop=1 2018-01-23T16:51:15.656Z,1516726275.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:15.659Z,1516726275.659 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 813.386589 min 2018-01-23T16:51:15.659Z,1516726275.659 [Default:CheckIn:E] Stopped 2018-01-23T16:51:15.659Z,1516726275.659 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T16:51:15.659Z,1516726275.659 [Default:CheckIn] Stopped 2018-01-23T16:51:15.660Z,1516726275.660 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T16:51:15.660Z,1516726275.660 [Default:CheckIn](INFO): Running loop #80 2018-01-23T16:51:15.660Z,1516726275.660 [Default:CheckIn] Running Loop=80 2018-01-23T16:51:15.660Z,1516726275.660 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T16:51:15.660Z,1516726275.660 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T16:51:16.064Z,1516726276.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:19.151Z,1516726279.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:19.293Z,1516726279.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:19.614Z,1516726279.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:20.024Z,1516726280.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:20.416Z,1516726280.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:20.818Z,1516726280.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:21.221Z,1516726281.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:21.618Z,1516726281.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:22.014Z,1516726282.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:22.416Z,1516726282.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:22.815Z,1516726282.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:23.224Z,1516726283.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:23.621Z,1516726283.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:24.034Z,1516726284.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:24.425Z,1516726284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:24.816Z,1516726284.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:25.225Z,1516726285.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:25.633Z,1516726285.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:26.025Z,1516726286.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:26.433Z,1516726286.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:26.829Z,1516726286.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:27.220Z,1516726287.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:27.625Z,1516726287.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:28.029Z,1516726288.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:28.426Z,1516726288.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:28.823Z,1516726288.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:29.224Z,1516726289.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:29.631Z,1516726289.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:30.029Z,1516726290.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:30.427Z,1516726290.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:30.824Z,1516726290.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:31.220Z,1516726291.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:31.625Z,1516726291.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:32.036Z,1516726292.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:32.430Z,1516726292.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:32.828Z,1516726292.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:33.219Z,1516726293.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:33.621Z,1516726293.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:34.029Z,1516726294.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:34.418Z,1516726294.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:34.835Z,1516726294.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:35.231Z,1516726295.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:35.629Z,1516726295.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:36.025Z,1516726296.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:36.424Z,1516726296.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:36.824Z,1516726296.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:37.218Z,1516726297.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:37.624Z,1516726297.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:38.031Z,1516726298.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:38.428Z,1516726298.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:38.828Z,1516726298.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:39.228Z,1516726299.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:39.623Z,1516726299.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:40.030Z,1516726300.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:40.421Z,1516726300.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:40.826Z,1516726300.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:41.229Z,1516726301.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:41.626Z,1516726301.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:42.024Z,1516726302.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:42.423Z,1516726302.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:42.819Z,1516726302.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:43.217Z,1516726303.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:43.623Z,1516726303.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:44.027Z,1516726304.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:44.429Z,1516726304.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:44.829Z,1516726304.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:45.219Z,1516726305.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:45.624Z,1516726305.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:46.027Z,1516726306.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:46.424Z,1516726306.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:46.830Z,1516726306.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:47.234Z,1516726307.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:47.630Z,1516726307.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:48.013Z,1516726308.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:48.427Z,1516726308.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:48.830Z,1516726308.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:49.206Z,1516726309.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:49.629Z,1516726309.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:50.038Z,1516726310.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:50.434Z,1516726310.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:50.835Z,1516726310.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:51.216Z,1516726311.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:51.611Z,1516726311.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:52.013Z,1516726312.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:52.415Z,1516726312.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:52.834Z,1516726312.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:53.240Z,1516726313.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:53.645Z,1516726313.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:54.013Z,1516726314.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:54.417Z,1516726314.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:54.815Z,1516726314.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:55.212Z,1516726315.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:55.612Z,1516726315.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:56.018Z,1516726316.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:56.418Z,1516726316.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:56.818Z,1516726316.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:57.216Z,1516726317.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:57.612Z,1516726317.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:58.016Z,1516726318.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:58.415Z,1516726318.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:58.818Z,1516726318.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:59.222Z,1516726319.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:51:59.646Z,1516726319.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:00.014Z,1516726320.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:00.417Z,1516726320.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:00.821Z,1516726320.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:01.223Z,1516726321.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:01.633Z,1516726321.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:02.026Z,1516726322.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:02.430Z,1516726322.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:02.828Z,1516726322.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:03.224Z,1516726323.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:03.613Z,1516726323.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:04.023Z,1516726324.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:04.430Z,1516726324.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:04.837Z,1516726324.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:05.230Z,1516726325.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:05.627Z,1516726325.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:06.013Z,1516726326.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:06.428Z,1516726326.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:06.829Z,1516726326.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:07.219Z,1516726327.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:07.629Z,1516726327.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:08.035Z,1516726328.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:08.435Z,1516726328.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:08.841Z,1516726328.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:09.212Z,1516726329.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:09.617Z,1516726329.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:10.017Z,1516726330.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:10.417Z,1516726330.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:10.851Z,1516726330.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:11.223Z,1516726331.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:11.625Z,1516726331.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:12.018Z,1516726332.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:12.434Z,1516726332.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:12.820Z,1516726332.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:13.217Z,1516726333.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:13.627Z,1516726333.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:14.026Z,1516726334.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:14.435Z,1516726334.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:14.833Z,1516726334.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:14.835Z,1516726334.835 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:14.835Z,1516726334.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 271 2018-01-23T16:52:14.835Z,1516726334.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:52:14.868Z,1516726334.868 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:52:15.218Z,1516726335.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:15.231Z,1516726335.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:52:15.231Z,1516726335.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 271 2018-01-23T16:52:15.624Z,1516726335.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:15.625Z,1516726335.625 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:52:15.626Z,1516726335.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:52:15.626Z,1516726335.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:52:16.024Z,1516726336.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:16.424Z,1516726336.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:19.533Z,1516726339.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:19.670Z,1516726339.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:20.025Z,1516726340.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:20.428Z,1516726340.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:20.797Z,1516726340.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:21.204Z,1516726341.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:21.601Z,1516726341.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:22.002Z,1516726342.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:22.427Z,1516726342.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:22.831Z,1516726342.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:23.195Z,1516726343.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:23.599Z,1516726343.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:23.982Z,1516726343.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:24.005Z,1516726344.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:24.384Z,1516726344.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:24.399Z,1516726344.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:24.790Z,1516726344.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:24.805Z,1516726344.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:25.190Z,1516726345.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:25.205Z,1516726345.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:25.205Z,1516726345.205 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 271 2018-01-23T16:52:25.205Z,1516726345.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:52:25.207Z,1516726345.207 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:25.207Z,1516726345.207 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 271 2018-01-23T16:52:25.207Z,1516726345.207 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:52:25.247Z,1516726345.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:52:25.248Z,1516726345.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:52:25.589Z,1516726345.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:25.616Z,1516726345.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:52:25.616Z,1516726345.616 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 271 2018-01-23T16:52:25.617Z,1516726345.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:52:25.617Z,1516726345.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 271 2018-01-23T16:52:25.980Z,1516726345.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:26.001Z,1516726346.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:52:26.001Z,1516726346.001 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:52:26.002Z,1516726346.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:52:26.002Z,1516726346.002 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:52:26.003Z,1516726346.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:52:26.003Z,1516726346.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:52:26.385Z,1516726346.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:26.399Z,1516726346.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:52:26.400Z,1516726346.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:26.784Z,1516726346.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:26.799Z,1516726346.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:52:26.800Z,1516726346.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:27.181Z,1516726347.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:27.208Z,1516726347.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:52:27.208Z,1516726347.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:27.585Z,1516726347.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:27.600Z,1516726347.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:52:27.601Z,1516726347.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:27.994Z,1516726347.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:28.009Z,1516726348.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:52:28.010Z,1516726348.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:28.398Z,1516726348.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:28.420Z,1516726348.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:52:28.421Z,1516726348.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:28.799Z,1516726348.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:28.813Z,1516726348.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:52:28.814Z,1516726348.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:29.180Z,1516726349.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:29.202Z,1516726349.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:52:29.203Z,1516726349.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:29.592Z,1516726349.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:29.612Z,1516726349.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:52:29.613Z,1516726349.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:29.986Z,1516726349.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:30.004Z,1516726350.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:52:30.005Z,1516726350.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:30.374Z,1516726350.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:30.405Z,1516726350.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:52:30.406Z,1516726350.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:30.799Z,1516726350.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:30.813Z,1516726350.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:52:30.814Z,1516726350.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:31.200Z,1516726351.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:31.214Z,1516726351.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:52:31.215Z,1516726351.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:31.598Z,1516726351.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:31.613Z,1516726351.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:52:31.614Z,1516726351.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:31.976Z,1516726351.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:32.008Z,1516726352.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:52:32.009Z,1516726352.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:32.393Z,1516726352.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:32.407Z,1516726352.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:52:32.408Z,1516726352.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:32.788Z,1516726352.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:32.806Z,1516726352.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:52:32.807Z,1516726352.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:33.197Z,1516726353.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:33.212Z,1516726353.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:52:33.213Z,1516726353.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:33.576Z,1516726353.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:33.603Z,1516726353.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:52:33.604Z,1516726353.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:33.995Z,1516726353.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:34.016Z,1516726354.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:52:34.017Z,1516726354.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:34.399Z,1516726354.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:34.413Z,1516726354.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:52:34.414Z,1516726354.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:34.803Z,1516726354.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:34.824Z,1516726354.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:52:34.825Z,1516726354.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:35.174Z,1516726355.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:35.201Z,1516726355.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:52:35.202Z,1516726355.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:35.576Z,1516726355.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:35.602Z,1516726355.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:52:35.603Z,1516726355.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:35.977Z,1516726355.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:36.016Z,1516726356.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:52:36.017Z,1516726356.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:36.379Z,1516726356.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:36.412Z,1516726356.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:52:36.413Z,1516726356.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:36.803Z,1516726356.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:36.817Z,1516726356.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:52:36.818Z,1516726356.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:37.199Z,1516726357.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:37.214Z,1516726357.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:52:37.215Z,1516726357.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:37.592Z,1516726357.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:37.622Z,1516726357.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:52:37.623Z,1516726357.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:37.992Z,1516726357.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:38.010Z,1516726358.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:52:38.011Z,1516726358.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:38.380Z,1516726358.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:38.409Z,1516726358.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:52:38.410Z,1516726358.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:38.780Z,1516726358.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:38.806Z,1516726358.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:52:38.807Z,1516726358.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:39.177Z,1516726359.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:39.208Z,1516726359.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:52:39.209Z,1516726359.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:39.582Z,1516726359.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:39.609Z,1516726359.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:52:39.610Z,1516726359.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:39.995Z,1516726359.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:40.030Z,1516726360.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:52:40.031Z,1516726360.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:40.407Z,1516726360.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:40.422Z,1516726360.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:52:40.423Z,1516726360.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:40.787Z,1516726360.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:40.820Z,1516726360.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:52:40.821Z,1516726360.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:41.176Z,1516726361.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:41.203Z,1516726361.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:52:41.204Z,1516726361.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:41.584Z,1516726361.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:41.616Z,1516726361.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:52:41.617Z,1516726361.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:41.977Z,1516726361.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:42.022Z,1516726362.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:52:42.023Z,1516726362.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:42.374Z,1516726362.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:42.389Z,1516726362.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:52:42.390Z,1516726362.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:42.787Z,1516726362.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:42.814Z,1516726362.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:52:42.819Z,1516726362.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:43.213Z,1516726363.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:43.227Z,1516726363.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:52:43.228Z,1516726363.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:43.588Z,1516726363.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:43.602Z,1516726363.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:52:43.611Z,1516726363.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:43.988Z,1516726363.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:44.028Z,1516726364.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:52:44.029Z,1516726364.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:44.391Z,1516726364.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:44.405Z,1516726364.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:52:44.406Z,1516726364.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:44.788Z,1516726364.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:44.802Z,1516726364.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:52:44.803Z,1516726364.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:45.187Z,1516726365.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:45.201Z,1516726365.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:52:45.202Z,1516726365.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:45.586Z,1516726365.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:45.605Z,1516726365.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:45.993Z,1516726365.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:46.025Z,1516726366.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:46.396Z,1516726366.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:46.411Z,1516726366.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:46.796Z,1516726366.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:46.810Z,1516726366.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:47.181Z,1516726367.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:47.208Z,1516726367.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:47.578Z,1516726367.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:47.610Z,1516726367.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:47.989Z,1516726367.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:48.005Z,1516726368.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:48.387Z,1516726368.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:48.415Z,1516726368.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:48.803Z,1516726368.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:48.819Z,1516726368.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:49.198Z,1516726369.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:49.218Z,1516726369.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:49.588Z,1516726369.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:49.625Z,1516726369.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:49.982Z,1516726369.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:49.997Z,1516726369.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:50.386Z,1516726370.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:50.400Z,1516726370.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:50.777Z,1516726370.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:50.801Z,1516726370.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:51.185Z,1516726371.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:51.201Z,1516726371.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:51.585Z,1516726371.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:51.600Z,1516726371.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:51.992Z,1516726371.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:52.009Z,1516726372.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:52.401Z,1516726372.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:52.429Z,1516726372.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:52.794Z,1516726372.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:52.816Z,1516726372.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:53.184Z,1516726373.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:53.200Z,1516726373.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:53.589Z,1516726373.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:53.604Z,1516726373.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:53.987Z,1516726373.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:54.002Z,1516726374.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:54.382Z,1516726374.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:54.413Z,1516726374.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:54.791Z,1516726374.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:54.806Z,1516726374.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:55.203Z,1516726375.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:55.218Z,1516726375.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:55.592Z,1516726375.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:55.607Z,1516726375.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:55.983Z,1516726375.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:56.006Z,1516726376.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:56.388Z,1516726376.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:56.402Z,1516726376.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:56.794Z,1516726376.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:56.813Z,1516726376.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:57.195Z,1516726377.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:57.210Z,1516726377.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:57.597Z,1516726377.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:57.616Z,1516726377.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:57.987Z,1516726377.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:58.002Z,1516726378.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:58.382Z,1516726378.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:58.412Z,1516726378.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:58.801Z,1516726378.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:58.816Z,1516726378.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:59.197Z,1516726379.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:59.220Z,1516726379.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:59.596Z,1516726379.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:52:59.611Z,1516726379.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:52:59.988Z,1516726379.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:00.003Z,1516726380.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:00.374Z,1516726380.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:00.405Z,1516726380.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:00.793Z,1516726380.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:00.820Z,1516726380.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:01.204Z,1516726381.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:01.218Z,1516726381.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:01.592Z,1516726381.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:01.613Z,1516726381.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:01.977Z,1516726381.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:02.024Z,1516726382.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:02.396Z,1516726382.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:02.404Z,1516726382.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x24724 got:0x14763 2018-01-23T16:53:02.421Z,1516726382.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:02.801Z,1516726382.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:02.821Z,1516726382.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:03.203Z,1516726383.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:03.218Z,1516726383.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:03.590Z,1516726383.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:03.617Z,1516726383.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:03.977Z,1516726383.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:03.997Z,1516726383.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x58666 got:0x14579 2018-01-23T16:53:04.025Z,1516726384.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:04.382Z,1516726384.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:04.409Z,1516726384.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:04.796Z,1516726384.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:04.815Z,1516726384.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:05.193Z,1516726385.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:05.217Z,1516726385.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:05.598Z,1516726385.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:05.613Z,1516726385.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:05.978Z,1516726385.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:06.016Z,1516726386.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:06.376Z,1516726386.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:06.408Z,1516726386.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:06.795Z,1516726386.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:06.833Z,1516726386.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:07.207Z,1516726387.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:07.214Z,1516726387.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x47137 got:0x58263 2018-01-23T16:53:07.233Z,1516726387.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:07.593Z,1516726387.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:07.616Z,1516726387.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:07.979Z,1516726387.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:08.005Z,1516726388.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:08.384Z,1516726388.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:08.425Z,1516726388.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:08.796Z,1516726388.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:08.810Z,1516726388.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x12676 got:0x39481 2018-01-23T16:53:08.837Z,1516726388.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:09.205Z,1516726389.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:09.220Z,1516726389.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:09.598Z,1516726389.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:09.613Z,1516726389.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:09.977Z,1516726389.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:10.012Z,1516726390.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:10.379Z,1516726390.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:10.416Z,1516726390.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:10.787Z,1516726390.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:10.824Z,1516726390.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:11.190Z,1516726391.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:11.224Z,1516726391.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:11.587Z,1516726391.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:11.633Z,1516726391.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:11.981Z,1516726391.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:12.020Z,1516726392.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:12.374Z,1516726392.374 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:12.392Z,1516726392.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:12.793Z,1516726392.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:12.819Z,1516726392.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:13.191Z,1516726393.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:13.224Z,1516726393.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:13.587Z,1516726393.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:13.619Z,1516726393.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:13.985Z,1516726393.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:14.020Z,1516726394.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:14.382Z,1516726394.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:14.400Z,1516726394.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:14.791Z,1516726394.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:14.833Z,1516726394.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:15.195Z,1516726395.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:15.230Z,1516726395.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:15.602Z,1516726395.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:15.638Z,1516726395.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:15.987Z,1516726395.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:16.004Z,1516726396.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:16.382Z,1516726396.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:16.429Z,1516726396.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:16.791Z,1516726396.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:16.809Z,1516726396.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:19.888Z,1516726399.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:19.909Z,1516726399.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:20.035Z,1516726400.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:20.051Z,1516726400.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:20.393Z,1516726400.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:20.421Z,1516726400.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:20.802Z,1516726400.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:20.809Z,1516726400.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x17045 got:0x45153 2018-01-23T16:53:20.845Z,1516726400.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:21.193Z,1516726401.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:21.233Z,1516726401.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:21.594Z,1516726401.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:21.628Z,1516726401.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:22.013Z,1516726402.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:22.045Z,1516726402.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:22.409Z,1516726402.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:22.425Z,1516726402.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:22.807Z,1516726402.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:22.852Z,1516726402.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:23.197Z,1516726403.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:23.212Z,1516726403.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:23.598Z,1516726403.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:23.617Z,1516726403.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:23.992Z,1516726403.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:24.021Z,1516726404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:24.389Z,1516726404.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:24.436Z,1516726404.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:24.812Z,1516726404.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:24.831Z,1516726404.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:25.216Z,1516726405.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:25.237Z,1516726405.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:25.612Z,1516726405.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:25.627Z,1516726405.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:25.989Z,1516726405.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:26.036Z,1516726406.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:26.402Z,1516726406.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:26.429Z,1516726406.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:26.808Z,1516726406.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:26.828Z,1516726406.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:27.214Z,1516726407.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:27.230Z,1516726407.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:27.609Z,1516726407.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:27.659Z,1516726407.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:27.989Z,1516726407.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:28.017Z,1516726408.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:28.406Z,1516726408.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:28.425Z,1516726408.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:28.818Z,1516726408.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:28.834Z,1516726408.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:29.212Z,1516726409.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:29.254Z,1516726409.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:29.610Z,1516726409.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:29.627Z,1516726409.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:29.990Z,1516726409.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:30.026Z,1516726410.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:30.389Z,1516726410.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:30.442Z,1516726410.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:30.814Z,1516726410.814 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:30.830Z,1516726410.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:31.214Z,1516726411.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:31.232Z,1516726411.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:31.608Z,1516726411.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:31.628Z,1516726411.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:31.989Z,1516726411.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:32.031Z,1516726412.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:32.388Z,1516726412.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:32.418Z,1516726412.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:32.804Z,1516726412.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:32.833Z,1516726412.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:33.215Z,1516726413.215 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:33.235Z,1516726413.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:33.606Z,1516726413.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:33.626Z,1516726413.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:33.989Z,1516726413.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:34.021Z,1516726414.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:34.387Z,1516726414.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:34.413Z,1516726414.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:34.806Z,1516726414.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:34.834Z,1516726414.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:35.211Z,1516726415.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:35.230Z,1516726415.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:35.604Z,1516726415.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:35.625Z,1516726415.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:35.993Z,1516726415.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:36.029Z,1516726416.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:36.388Z,1516726416.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:36.413Z,1516726416.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:36.804Z,1516726416.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:36.837Z,1516726416.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:37.211Z,1516726417.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:37.226Z,1516726417.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:37.607Z,1516726417.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:37.623Z,1516726417.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:37.989Z,1516726417.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:38.021Z,1516726418.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:38.388Z,1516726418.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:38.431Z,1516726418.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:38.807Z,1516726418.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:38.823Z,1516726418.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:39.209Z,1516726419.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:39.229Z,1516726419.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:39.608Z,1516726419.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:39.623Z,1516726419.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:39.989Z,1516726419.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:40.015Z,1516726420.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:40.389Z,1516726420.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:40.421Z,1516726420.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:40.788Z,1516726420.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:40.824Z,1516726420.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:41.210Z,1516726421.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:41.234Z,1516726421.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:41.615Z,1516726421.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:41.637Z,1516726421.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:42.008Z,1516726422.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:42.025Z,1516726422.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:42.388Z,1516726422.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:42.420Z,1516726422.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:42.788Z,1516726422.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:42.821Z,1516726422.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:43.189Z,1516726423.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:43.228Z,1516726423.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:43.592Z,1516726423.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:43.618Z,1516726423.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:44.007Z,1516726424.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:44.022Z,1516726424.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:44.412Z,1516726424.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:44.426Z,1516726424.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:44.807Z,1516726424.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:44.822Z,1516726424.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:45.188Z,1516726425.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:45.224Z,1516726425.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:45.588Z,1516726425.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:45.626Z,1516726425.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:45.993Z,1516726425.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:46.018Z,1516726426.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:46.389Z,1516726426.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:46.416Z,1516726426.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:46.788Z,1516726426.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:46.819Z,1516726426.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:47.199Z,1516726427.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:47.225Z,1516726427.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:47.603Z,1516726427.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:47.630Z,1516726427.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:48.006Z,1516726428.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:48.033Z,1516726428.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:48.393Z,1516726428.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:48.428Z,1516726428.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:48.788Z,1516726428.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:48.802Z,1516726428.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:49.189Z,1516726429.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:49.208Z,1516726429.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:49.592Z,1516726429.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:49.609Z,1516726429.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:50.007Z,1516726430.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:50.041Z,1516726430.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:50.407Z,1516726430.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:50.437Z,1516726430.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:50.807Z,1516726430.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:50.833Z,1516726430.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:51.200Z,1516726431.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:51.237Z,1516726431.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:51.592Z,1516726431.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:51.607Z,1516726431.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:52.000Z,1516726432.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:52.041Z,1516726432.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:52.401Z,1516726432.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:52.416Z,1516726432.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:52.797Z,1516726432.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:52.811Z,1516726432.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:53.199Z,1516726433.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:53.214Z,1516726433.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:53.603Z,1516726433.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:53.618Z,1516726433.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:54.007Z,1516726434.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:54.029Z,1516726434.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:54.400Z,1516726434.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:54.421Z,1516726434.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:54.800Z,1516726434.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:54.821Z,1516726434.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:55.198Z,1516726435.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:55.212Z,1516726435.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:55.592Z,1516726435.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:55.614Z,1516726435.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:56.007Z,1516726436.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:56.022Z,1516726436.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:56.406Z,1516726436.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:56.429Z,1516726436.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:56.806Z,1516726436.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:56.825Z,1516726436.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:57.196Z,1516726437.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:57.211Z,1516726437.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:57.597Z,1516726437.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:57.612Z,1516726437.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:57.993Z,1516726437.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:58.014Z,1516726438.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:58.392Z,1516726438.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:58.423Z,1516726438.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:58.797Z,1516726438.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:58.812Z,1516726438.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:59.207Z,1516726439.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:59.222Z,1516726439.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:53:59.611Z,1516726439.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:53:59.626Z,1516726439.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:00.008Z,1516726440.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:00.023Z,1516726440.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:00.396Z,1516726440.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:00.428Z,1516726440.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:00.788Z,1516726440.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:00.821Z,1516726440.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:01.189Z,1516726441.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:01.225Z,1516726441.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:01.605Z,1516726441.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:01.625Z,1516726441.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:02.004Z,1516726442.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:02.031Z,1516726442.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:02.412Z,1516726442.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:02.427Z,1516726442.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:02.808Z,1516726442.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:02.824Z,1516726442.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:03.189Z,1516726443.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:03.221Z,1516726443.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:03.588Z,1516726443.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:03.628Z,1516726443.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:03.992Z,1516726443.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:04.025Z,1516726444.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:04.389Z,1516726444.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:04.426Z,1516726444.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:04.788Z,1516726444.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:04.818Z,1516726444.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:05.207Z,1516726445.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:05.223Z,1516726445.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:05.608Z,1516726445.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:05.636Z,1516726445.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:05.998Z,1516726445.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:06.035Z,1516726446.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:06.392Z,1516726446.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:06.429Z,1516726446.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:06.796Z,1516726446.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:06.829Z,1516726446.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:07.189Z,1516726447.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:07.233Z,1516726447.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:07.586Z,1516726447.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:07.601Z,1516726447.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:08.008Z,1516726448.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:08.041Z,1516726448.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:08.407Z,1516726448.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:08.436Z,1516726448.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:08.803Z,1516726448.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:08.831Z,1516726448.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:09.189Z,1516726449.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:09.209Z,1516726449.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:09.598Z,1516726449.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:09.612Z,1516726449.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:09.990Z,1516726449.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:10.005Z,1516726450.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:10.402Z,1516726450.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:10.417Z,1516726450.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:10.797Z,1516726450.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:10.812Z,1516726450.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:11.200Z,1516726451.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:11.221Z,1516726451.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:11.612Z,1516726451.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:11.664Z,1516726451.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:12.012Z,1516726452.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:12.052Z,1516726452.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:12.392Z,1516726452.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:12.419Z,1516726452.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:12.796Z,1516726452.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:12.812Z,1516726452.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:13.198Z,1516726453.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:13.212Z,1516726453.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:13.592Z,1516726453.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:13.612Z,1516726453.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:14.002Z,1516726454.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:14.021Z,1516726454.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:14.407Z,1516726454.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:14.422Z,1516726454.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:14.804Z,1516726454.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:14.819Z,1516726454.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:15.196Z,1516726455.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:15.217Z,1516726455.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:15.601Z,1516726455.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:15.615Z,1516726455.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:15.996Z,1516726455.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:16.011Z,1516726456.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:16.402Z,1516726456.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:16.417Z,1516726456.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:16.798Z,1516726456.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:16.813Z,1516726456.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:19.904Z,1516726459.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:19.925Z,1516726459.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:20.039Z,1516726460.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:20.073Z,1516726460.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:20.423Z,1516726460.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:20.457Z,1516726460.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:20.813Z,1516726460.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:20.833Z,1516726460.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:21.214Z,1516726461.214 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:21.229Z,1516726461.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:21.612Z,1516726461.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:21.626Z,1516726461.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:22.023Z,1516726462.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:22.051Z,1516726462.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:22.427Z,1516726462.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:22.461Z,1516726462.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:22.815Z,1516726462.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:22.837Z,1516726462.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:23.209Z,1516726463.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:23.224Z,1516726463.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:23.611Z,1516726463.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:23.626Z,1516726463.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:24.012Z,1516726464.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:24.033Z,1516726464.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:24.409Z,1516726464.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:24.428Z,1516726464.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:24.810Z,1516726464.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:24.833Z,1516726464.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:25.237Z,1516726465.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:25.650Z,1516726465.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:26.038Z,1516726466.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:26.439Z,1516726466.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:26.837Z,1516726466.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:27.239Z,1516726467.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:27.639Z,1516726467.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:28.047Z,1516726468.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:28.452Z,1516726468.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:28.815Z,1516726468.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:28.851Z,1516726468.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:29.202Z,1516726469.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:29.217Z,1516726469.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:29.604Z,1516726469.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:29.625Z,1516726469.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:30.012Z,1516726470.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:30.027Z,1516726470.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:30.409Z,1516726470.409 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:30.425Z,1516726470.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:30.809Z,1516726470.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:30.829Z,1516726470.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:31.218Z,1516726471.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:31.233Z,1516726471.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:31.615Z,1516726471.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:31.630Z,1516726471.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:32.031Z,1516726472.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:32.058Z,1516726472.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:32.413Z,1516726472.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:32.428Z,1516726472.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:32.812Z,1516726472.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:32.827Z,1516726472.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:33.212Z,1516726473.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:33.230Z,1516726473.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:33.613Z,1516726473.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:33.628Z,1516726473.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:33.641Z,1516726473.641 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T16:54:34.018Z,1516726474.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:34.037Z,1516726474.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:34.419Z,1516726474.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:34.434Z,1516726474.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:34.818Z,1516726474.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:34.833Z,1516726474.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:35.208Z,1516726475.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:35.228Z,1516726475.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:35.612Z,1516726475.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:35.627Z,1516726475.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:36.013Z,1516726476.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:36.028Z,1516726476.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:36.412Z,1516726476.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:36.431Z,1516726476.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:36.812Z,1516726476.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:36.827Z,1516726476.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:37.218Z,1516726477.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:37.240Z,1516726477.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:37.617Z,1516726477.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:37.633Z,1516726477.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:38.022Z,1516726478.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:38.037Z,1516726478.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:38.413Z,1516726478.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:38.428Z,1516726478.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:38.812Z,1516726478.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:38.827Z,1516726478.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:39.209Z,1516726479.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:39.228Z,1516726479.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:39.617Z,1516726479.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:39.632Z,1516726479.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:40.023Z,1516726480.023 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:40.038Z,1516726480.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:40.427Z,1516726480.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:40.442Z,1516726480.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:40.824Z,1516726480.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:40.839Z,1516726480.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:41.202Z,1516726481.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:41.230Z,1516726481.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:41.604Z,1516726481.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:41.641Z,1516726481.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:42.022Z,1516726482.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:42.036Z,1516726482.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:42.405Z,1516726482.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:42.437Z,1516726482.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:42.808Z,1516726482.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:42.845Z,1516726482.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:43.232Z,1516726483.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:43.249Z,1516726483.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:43.620Z,1516726483.620 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:43.650Z,1516726483.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:44.024Z,1516726484.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:54:44.039Z,1516726484.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:44.441Z,1516726484.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:44.835Z,1516726484.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:45.236Z,1516726485.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:45.641Z,1516726485.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:46.049Z,1516726486.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:46.444Z,1516726486.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:46.849Z,1516726486.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:47.217Z,1516726487.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:47.645Z,1516726487.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:48.023Z,1516726488.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:48.421Z,1516726488.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:48.850Z,1516726488.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:49.253Z,1516726489.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:49.649Z,1516726489.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:50.057Z,1516726490.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:50.427Z,1516726490.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:50.849Z,1516726490.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:51.229Z,1516726491.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:51.627Z,1516726491.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:52.057Z,1516726492.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:52.454Z,1516726492.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:52.865Z,1516726492.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:53.225Z,1516726493.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:53.628Z,1516726493.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:54.026Z,1516726494.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:54.426Z,1516726494.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:54.828Z,1516726494.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:55.230Z,1516726495.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:55.634Z,1516726495.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:56.037Z,1516726496.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:56.428Z,1516726496.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:56.828Z,1516726496.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:57.229Z,1516726497.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:57.627Z,1516726497.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:58.037Z,1516726498.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:58.434Z,1516726498.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:58.833Z,1516726498.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:59.226Z,1516726499.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:54:59.633Z,1516726499.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:00.028Z,1516726500.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:00.428Z,1516726500.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:00.827Z,1516726500.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:01.234Z,1516726501.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:01.637Z,1516726501.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:02.037Z,1516726502.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:02.428Z,1516726502.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:02.826Z,1516726502.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:03.228Z,1516726503.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:03.627Z,1516726503.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:04.038Z,1516726504.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:04.438Z,1516726504.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:04.840Z,1516726504.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:05.229Z,1516726505.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:05.627Z,1516726505.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:06.031Z,1516726506.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:06.431Z,1516726506.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:06.827Z,1516726506.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:07.233Z,1516726507.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:07.637Z,1516726507.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:08.034Z,1516726508.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:08.428Z,1516726508.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:08.863Z,1516726508.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:09.228Z,1516726509.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:09.627Z,1516726509.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:10.037Z,1516726510.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:10.434Z,1516726510.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:10.840Z,1516726510.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:11.226Z,1516726511.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:11.627Z,1516726511.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:12.028Z,1516726512.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:12.429Z,1516726512.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:12.827Z,1516726512.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:13.240Z,1516726513.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:13.637Z,1516726513.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:14.034Z,1516726514.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:14.432Z,1516726514.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:14.827Z,1516726514.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:15.229Z,1516726515.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:15.635Z,1516726515.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:15.637Z,1516726515.637 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:15.637Z,1516726515.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 272 2018-01-23T16:55:15.637Z,1516726515.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:55:15.650Z,1516726515.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:55:16.039Z,1516726516.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:16.052Z,1516726516.052 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:55:16.052Z,1516726516.052 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 272 2018-01-23T16:55:16.441Z,1516726516.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:16.442Z,1516726516.442 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:55:16.443Z,1516726516.443 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:55:16.443Z,1516726516.443 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:55:16.841Z,1516726516.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:19.934Z,1516726519.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:20.076Z,1516726520.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:20.422Z,1516726520.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:20.828Z,1516726520.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:21.223Z,1516726521.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:21.600Z,1516726521.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:21.999Z,1516726521.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:22.401Z,1516726522.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:22.805Z,1516726522.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:23.202Z,1516726523.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:23.606Z,1516726523.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:24.002Z,1516726524.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:24.410Z,1516726524.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:24.805Z,1516726524.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:25.202Z,1516726525.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:25.608Z,1516726525.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:26.017Z,1516726526.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:26.017Z,1516726526.017 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 272 2018-01-23T16:55:26.017Z,1516726526.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:55:26.019Z,1516726526.019 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:26.019Z,1516726526.019 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 272 2018-01-23T16:55:26.019Z,1516726526.019 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:55:26.040Z,1516726526.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:55:26.040Z,1516726526.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:55:26.428Z,1516726526.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:55:26.428Z,1516726526.428 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 272 2018-01-23T16:55:26.429Z,1516726526.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:55:26.429Z,1516726526.429 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 272 2018-01-23T16:55:26.810Z,1516726526.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:55:26.811Z,1516726526.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:55:26.811Z,1516726526.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:55:26.811Z,1516726526.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:55:26.812Z,1516726526.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:55:26.812Z,1516726526.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:55:27.209Z,1516726527.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:55:27.210Z,1516726527.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:27.612Z,1516726527.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:55:27.613Z,1516726527.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:28.015Z,1516726528.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:55:28.016Z,1516726528.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:28.418Z,1516726528.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:55:28.423Z,1516726528.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:28.824Z,1516726528.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:55:28.825Z,1516726528.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:29.221Z,1516726529.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:55:29.222Z,1516726529.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:29.620Z,1516726529.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:55:29.621Z,1516726529.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:30.014Z,1516726530.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:55:30.015Z,1516726530.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:30.426Z,1516726530.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:55:30.427Z,1516726530.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:30.817Z,1516726530.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:55:30.818Z,1516726530.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:31.191Z,1516726531.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:55:31.192Z,1516726531.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:31.596Z,1516726531.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:55:31.597Z,1516726531.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:32.002Z,1516726532.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:55:32.019Z,1516726532.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:32.429Z,1516726532.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:55:32.430Z,1516726532.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:32.825Z,1516726532.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:55:32.825Z,1516726532.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:33.196Z,1516726533.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:55:33.197Z,1516726533.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:33.604Z,1516726533.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:55:33.605Z,1516726533.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:34.031Z,1516726534.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:55:34.032Z,1516726534.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:34.408Z,1516726534.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:55:34.409Z,1516726534.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:34.813Z,1516726534.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:55:34.814Z,1516726534.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:35.203Z,1516726535.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:55:35.204Z,1516726535.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:35.597Z,1516726535.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:55:35.598Z,1516726535.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:36.008Z,1516726536.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:55:36.009Z,1516726536.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:36.390Z,1516726536.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:36.404Z,1516726536.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:55:36.405Z,1516726536.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:36.790Z,1516726536.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:36.808Z,1516726536.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:55:36.809Z,1516726536.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:37.184Z,1516726537.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:37.202Z,1516726537.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T16:55:37.203Z,1516726537.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:37.585Z,1516726537.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:37.600Z,1516726537.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T16:55:37.600Z,1516726537.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:37.990Z,1516726537.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:38.012Z,1516726538.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T16:55:38.013Z,1516726538.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:38.393Z,1516726538.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:38.412Z,1516726538.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T16:55:38.413Z,1516726538.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:38.794Z,1516726538.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:38.809Z,1516726538.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T16:55:38.810Z,1516726538.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:39.181Z,1516726539.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:39.200Z,1516726539.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T16:55:39.201Z,1516726539.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:39.580Z,1516726539.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:39.602Z,1516726539.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T16:55:39.607Z,1516726539.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:39.986Z,1516726539.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:40.000Z,1516726540.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T16:55:40.001Z,1516726540.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:40.395Z,1516726540.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:40.409Z,1516726540.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:55:40.410Z,1516726540.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:40.798Z,1516726540.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:40.813Z,1516726540.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:55:40.814Z,1516726540.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:41.196Z,1516726541.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:41.216Z,1516726541.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:55:41.217Z,1516726541.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:41.574Z,1516726541.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:41.600Z,1516726541.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:55:41.601Z,1516726541.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:41.979Z,1516726541.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:42.011Z,1516726542.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:55:42.012Z,1516726542.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:42.386Z,1516726542.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:42.404Z,1516726542.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:55:42.405Z,1516726542.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:42.786Z,1516726542.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:42.801Z,1516726542.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:55:42.802Z,1516726542.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:43.194Z,1516726543.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:43.209Z,1516726543.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:55:43.210Z,1516726543.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:43.598Z,1516726543.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:43.612Z,1516726543.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:55:43.613Z,1516726543.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:43.995Z,1516726543.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:44.010Z,1516726544.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:55:44.011Z,1516726544.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:44.380Z,1516726544.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:44.402Z,1516726544.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:55:44.403Z,1516726544.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:44.785Z,1516726544.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:44.804Z,1516726544.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:55:44.805Z,1516726544.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:45.174Z,1516726545.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:45.205Z,1516726545.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:55:45.206Z,1516726545.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:45.577Z,1516726545.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:45.608Z,1516726545.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:55:45.609Z,1516726545.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:45.976Z,1516726545.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:46.012Z,1516726546.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T16:55:46.013Z,1516726546.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:46.392Z,1516726546.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:46.419Z,1516726546.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:46.803Z,1516726546.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:46.818Z,1516726546.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:47.190Z,1516726547.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:47.222Z,1516726547.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:47.574Z,1516726547.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:47.609Z,1516726547.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:47.976Z,1516726547.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:48.013Z,1516726548.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:48.381Z,1516726548.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:48.408Z,1516726548.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:48.780Z,1516726548.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:48.806Z,1516726548.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:49.195Z,1516726549.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:49.210Z,1516726549.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:49.599Z,1516726549.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:49.620Z,1516726549.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:49.995Z,1516726549.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:50.010Z,1516726550.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:50.376Z,1516726550.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:50.409Z,1516726550.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:50.777Z,1516726550.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:50.814Z,1516726550.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:51.174Z,1516726551.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:51.197Z,1516726551.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:51.577Z,1516726551.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:51.608Z,1516726551.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:51.980Z,1516726551.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:52.019Z,1516726552.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:52.387Z,1516726552.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:52.414Z,1516726552.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:52.791Z,1516726552.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:52.825Z,1516726552.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:53.191Z,1516726553.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:53.224Z,1516726553.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:53.574Z,1516726553.574 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:53.589Z,1516726553.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:53.980Z,1516726553.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:54.021Z,1516726554.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:54.385Z,1516726554.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:54.401Z,1516726554.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:54.781Z,1516726554.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:54.801Z,1516726554.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:55.199Z,1516726555.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:55.230Z,1516726555.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:55.595Z,1516726555.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:55.610Z,1516726555.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:55.988Z,1516726555.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:56.002Z,1516726556.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:56.384Z,1516726556.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:56.399Z,1516726556.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:56.790Z,1516726556.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:56.805Z,1516726556.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:57.183Z,1516726557.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:57.203Z,1516726557.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:57.583Z,1516726557.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:57.610Z,1516726557.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:57.990Z,1516726557.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:58.005Z,1516726558.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:58.391Z,1516726558.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:58.406Z,1516726558.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:58.792Z,1516726558.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:58.807Z,1516726558.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:59.190Z,1516726559.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:59.206Z,1516726559.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:59.584Z,1516726559.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:59.600Z,1516726559.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:55:59.984Z,1516726559.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:55:59.000Z,1516726560.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:00.384Z,1516726560.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:00.412Z,1516726560.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:00.788Z,1516726560.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:00.809Z,1516726560.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:01.194Z,1516726561.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:01.209Z,1516726561.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:01.595Z,1516726561.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:01.617Z,1516726561.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:01.994Z,1516726561.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:02.009Z,1516726562.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:02.384Z,1516726562.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:02.403Z,1516726562.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:02.780Z,1516726562.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:02.817Z,1516726562.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:03.189Z,1516726563.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:03.209Z,1516726563.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:03.583Z,1516726563.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:03.606Z,1516726563.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:03.994Z,1516726563.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:04.017Z,1516726564.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:04.399Z,1516726564.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:04.414Z,1516726564.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:04.800Z,1516726564.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:04.814Z,1516726564.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:05.192Z,1516726565.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:05.215Z,1516726565.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:05.577Z,1516726565.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:05.613Z,1516726565.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:05.981Z,1516726565.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:06.013Z,1516726566.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:06.378Z,1516726566.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:06.416Z,1516726566.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:06.781Z,1516726566.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:06.813Z,1516726566.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:07.187Z,1516726567.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:07.227Z,1516726567.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:07.602Z,1516726567.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:07.617Z,1516726567.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:07.988Z,1516726567.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:08.017Z,1516726568.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:08.376Z,1516726568.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:08.413Z,1516726568.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:08.776Z,1516726568.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:08.792Z,1516726568.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:09.176Z,1516726569.176 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:09.193Z,1516726569.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:09.586Z,1516726569.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:09.601Z,1516726569.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:09.981Z,1516726569.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:09.996Z,1516726569.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:10.391Z,1516726570.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:10.419Z,1516726570.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:10.795Z,1516726570.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:10.828Z,1516726570.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:11.198Z,1516726571.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:11.214Z,1516726571.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:11.588Z,1516726571.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:11.603Z,1516726571.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:11.989Z,1516726571.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:12.004Z,1516726572.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:12.386Z,1516726572.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:12.400Z,1516726572.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:12.784Z,1516726572.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:12.799Z,1516726572.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:13.190Z,1516726573.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:13.209Z,1516726573.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:13.591Z,1516726573.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:13.606Z,1516726573.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:13.990Z,1516726573.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:14.005Z,1516726574.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:14.384Z,1516726574.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:14.399Z,1516726574.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:14.785Z,1516726574.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:14.799Z,1516726574.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:15.184Z,1516726575.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:15.199Z,1516726575.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:15.580Z,1516726575.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:15.613Z,1516726575.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:15.989Z,1516726575.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:16.004Z,1516726576.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:16.007Z,1516726576.007 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T16:51:15.7Z 2018-01-23T16:56:16.007Z,1516726576.007 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T16:56:16.007Z,1516726576.007 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T16:56:16.394Z,1516726576.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:16.409Z,1516726576.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:16.931Z,1516726576.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:16.949Z,1516726576.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:17.195Z,1516726577.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:17.210Z,1516726577.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:20.290Z,1516726580.290 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:20.305Z,1516726580.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:20.379Z,1516726580.379 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0320.lzma 2018-01-23T16:56:20.399Z,1516726580.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:20.447Z,1516726580.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:20.777Z,1516726580.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:20.792Z,1516726580.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:21.137Z,1516726581.137 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0320.lzma.bak 2018-01-23T16:56:21.137Z,1516726581.137 [DataOverHttps](INFO): SBD MOMSN=7755994 2018-01-23T16:56:21.180Z,1516726581.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:21.268Z,1516726581.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:21.812Z,1516726581.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:21.844Z,1516726581.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:21.961Z,1516726581.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:21.990Z,1516726581.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:25.095Z,1516726585.095 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:25.110Z,1516726585.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:25.206Z,1516726585.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:25.248Z,1516726585.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:25.598Z,1516726585.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:25.617Z,1516726585.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:26.011Z,1516726586.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:26.026Z,1516726586.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:26.398Z,1516726586.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:26.422Z,1516726586.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:26.793Z,1516726586.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:26.808Z,1516726586.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:30.940Z,1516726590.940 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:30.961Z,1516726590.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:31.055Z,1516726591.055 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0321.lzma 2018-01-23T16:56:31.105Z,1516726591.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:31.144Z,1516726591.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:31.510Z,1516726591.510 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:31.540Z,1516726591.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:36.153Z,1516726596.153 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0321.lzma.bak 2018-01-23T16:56:36.153Z,1516726596.153 [DataOverHttps](INFO): SBD MOMSN=7755996 2018-01-23T16:56:36.208Z,1516726596.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:36.237Z,1516726596.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:36.866Z,1516726596.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:36.897Z,1516726596.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:36.904Z,1516726596.904 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T16:56:36.904Z,1516726596.904 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T16:56:36.904Z,1516726596.904 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T16:56:37.000Z,1516726597.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:37.038Z,1516726597.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:42.963Z,1516726602.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:42.983Z,1516726602.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:43.157Z,1516726603.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:43.198Z,1516726603.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:43.527Z,1516726603.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:43.553Z,1516726603.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:43.936Z,1516726603.936 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:43.964Z,1516726603.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:44.316Z,1516726604.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:44.353Z,1516726604.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:44.747Z,1516726604.747 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:44.774Z,1516726604.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:45.109Z,1516726605.109 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:45.154Z,1516726605.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:45.512Z,1516726605.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:45.537Z,1516726605.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:45.932Z,1516726605.932 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:45.971Z,1516726605.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:46.331Z,1516726606.331 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:46.373Z,1516726606.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:46.730Z,1516726606.730 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:46.745Z,1516726606.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T16:56:46.781Z,1516726606.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:47.135Z,1516726607.135 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:47.154Z,1516726607.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:47.501Z,1516726607.501 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:47.556Z,1516726607.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:47.903Z,1516726607.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:47.949Z,1516726607.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:48.315Z,1516726608.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:48.358Z,1516726608.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:48.718Z,1516726608.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:48.776Z,1516726608.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:49.139Z,1516726609.139 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:49.162Z,1516726609.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:49.529Z,1516726609.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:49.577Z,1516726609.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:49.921Z,1516726609.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:49.968Z,1516726609.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:50.318Z,1516726610.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:50.354Z,1516726610.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:50.726Z,1516726610.726 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:50.767Z,1516726610.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:51.116Z,1516726611.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:51.164Z,1516726611.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:51.519Z,1516726611.519 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:51.563Z,1516726611.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:51.939Z,1516726611.939 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:51.975Z,1516726611.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:52.312Z,1516726612.312 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:52.345Z,1516726612.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:52.711Z,1516726612.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:52.745Z,1516726612.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:53.137Z,1516726613.137 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:53.179Z,1516726613.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:53.524Z,1516726613.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:53.576Z,1516726613.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:53.923Z,1516726613.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:53.933Z,1516726613.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x21959 got:0x6466 2018-01-23T16:56:53.969Z,1516726613.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:54.325Z,1516726614.325 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:54.373Z,1516726614.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:54.702Z,1516726614.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:54.753Z,1516726614.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:55.128Z,1516726615.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:55.154Z,1516726615.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:55.539Z,1516726615.539 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:55.581Z,1516726615.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:55.934Z,1516726615.934 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:56.006Z,1516726616.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:56.324Z,1516726616.324 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:56.354Z,1516726616.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:56.721Z,1516726616.721 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:56.765Z,1516726616.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:57.116Z,1516726617.116 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:57.159Z,1516726617.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:57.527Z,1516726617.527 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:57.564Z,1516726617.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:57.918Z,1516726617.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:57.937Z,1516726617.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:58.310Z,1516726618.310 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:58.325Z,1516726618.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:58.708Z,1516726618.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:58.726Z,1516726618.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:59.118Z,1516726619.118 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:59.133Z,1516726619.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:59.518Z,1516726619.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:59.533Z,1516726619.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:56:59.919Z,1516726619.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:56:59.934Z,1516726619.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:00.308Z,1516726620.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:00.326Z,1516726620.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:00.710Z,1516726620.710 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:00.725Z,1516726620.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:01.108Z,1516726621.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:01.127Z,1516726621.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:01.514Z,1516726621.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:01.541Z,1516726621.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:01.923Z,1516726621.923 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:01.941Z,1516726621.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:02.323Z,1516726622.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:02.338Z,1516726622.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:02.708Z,1516726622.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:02.728Z,1516726622.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:03.110Z,1516726623.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:03.125Z,1516726623.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:03.514Z,1516726623.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:03.529Z,1516726623.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:03.905Z,1516726623.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:03.927Z,1516726623.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:04.320Z,1516726624.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:04.340Z,1516726624.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:04.723Z,1516726624.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:04.738Z,1516726624.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:05.120Z,1516726625.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:05.135Z,1516726625.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:05.508Z,1516726625.508 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:05.537Z,1516726625.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:05.908Z,1516726625.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:05.936Z,1516726625.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:06.313Z,1516726626.313 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:06.333Z,1516726626.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:06.701Z,1516726626.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:06.737Z,1516726626.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:07.101Z,1516726627.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:07.137Z,1516726627.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:07.520Z,1516726627.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:07.535Z,1516726627.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:07.921Z,1516726627.921 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:07.948Z,1516726627.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:08.319Z,1516726628.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:08.341Z,1516726628.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:08.701Z,1516726628.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:08.727Z,1516726628.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:09.100Z,1516726629.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:09.137Z,1516726629.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:09.502Z,1516726629.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:09.533Z,1516726629.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:09.900Z,1516726629.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:09.926Z,1516726629.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:10.318Z,1516726630.318 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:10.333Z,1516726630.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:10.722Z,1516726630.722 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:10.753Z,1516726630.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:11.123Z,1516726631.123 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:11.138Z,1516726631.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:11.500Z,1516726631.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:11.534Z,1516726631.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:11.901Z,1516726631.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:11.932Z,1516726631.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:12.301Z,1516726632.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:12.332Z,1516726632.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:12.701Z,1516726632.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:12.716Z,1516726632.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:13.101Z,1516726633.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:13.116Z,1516726633.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:13.523Z,1516726633.523 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:13.549Z,1516726633.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:13.919Z,1516726633.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:13.954Z,1516726633.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:14.319Z,1516726634.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:14.345Z,1516726634.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:14.708Z,1516726634.708 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:14.745Z,1516726634.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:15.108Z,1516726635.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:15.123Z,1516726635.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:15.512Z,1516726635.512 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:15.533Z,1516726635.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:15.907Z,1516726635.907 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:15.922Z,1516726635.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:16.319Z,1516726636.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:16.334Z,1516726636.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:16.723Z,1516726636.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:16.754Z,1516726636.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:17.113Z,1516726637.113 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:17.128Z,1516726637.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:17.511Z,1516726637.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:17.526Z,1516726637.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:17.908Z,1516726637.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:17.929Z,1516726637.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:18.306Z,1516726638.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:18.341Z,1516726638.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:18.714Z,1516726638.714 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:18.730Z,1516726638.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:19.104Z,1516726639.104 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:19.126Z,1516726639.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:19.518Z,1516726639.518 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:19.534Z,1516726639.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:19.918Z,1516726639.918 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:19.937Z,1516726639.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:20.333Z,1516726640.333 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:20.365Z,1516726640.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:20.711Z,1516726640.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:20.733Z,1516726640.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:21.099Z,1516726641.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:21.136Z,1516726641.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:21.502Z,1516726641.502 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:21.528Z,1516726641.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:21.900Z,1516726641.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:21.937Z,1516726641.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:22.320Z,1516726642.320 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:22.335Z,1516726642.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:22.723Z,1516726642.723 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:22.738Z,1516726642.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:23.114Z,1516726643.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:23.164Z,1516726643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:23.500Z,1516726643.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:23.534Z,1516726643.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:23.901Z,1516726643.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:23.933Z,1516726643.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:24.300Z,1516726644.300 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:24.336Z,1516726644.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:24.701Z,1516726644.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:24.738Z,1516726644.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:25.101Z,1516726645.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:25.136Z,1516726645.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:25.511Z,1516726645.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:25.545Z,1516726645.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:25.924Z,1516726645.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:25.939Z,1516726645.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:26.311Z,1516726646.311 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:26.345Z,1516726646.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:26.705Z,1516726646.705 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:26.736Z,1516726646.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:27.100Z,1516726647.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:27.138Z,1516726647.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:27.506Z,1516726647.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:27.537Z,1516726647.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:27.900Z,1516726647.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:27.933Z,1516726647.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:28.315Z,1516726648.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:28.343Z,1516726648.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:28.715Z,1516726648.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:28.750Z,1516726648.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:29.111Z,1516726649.111 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:29.137Z,1516726649.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:29.500Z,1516726649.500 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:29.544Z,1516726649.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:29.905Z,1516726649.905 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:29.940Z,1516726649.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:30.301Z,1516726650.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:30.316Z,1516726650.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:30.701Z,1516726650.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:30.720Z,1516726650.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:31.101Z,1516726651.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:31.121Z,1516726651.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:31.520Z,1516726651.520 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:31.551Z,1516726651.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:31.931Z,1516726651.931 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:31.960Z,1516726651.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:32.316Z,1516726652.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:32.355Z,1516726652.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:32.712Z,1516726652.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:32.726Z,1516726652.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:33.108Z,1516726653.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:33.123Z,1516726653.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:33.506Z,1516726653.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:33.533Z,1516726653.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:33.910Z,1516726653.910 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:33.929Z,1516726653.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:34.323Z,1516726654.323 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:34.338Z,1516726654.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:34.711Z,1516726654.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:34.726Z,1516726654.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:35.112Z,1516726655.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:35.126Z,1516726655.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:35.509Z,1516726655.509 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:35.524Z,1516726655.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:35.908Z,1516726655.908 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:35.923Z,1516726655.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:36.308Z,1516726656.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:36.323Z,1516726656.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:36.709Z,1516726656.709 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:36.728Z,1516726656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:37.105Z,1516726657.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:37.129Z,1516726657.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:37.516Z,1516726657.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:37.531Z,1516726657.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:40.612Z,1516726660.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:40.627Z,1516726660.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:40.736Z,1516726660.736 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:40.761Z,1516726660.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:41.100Z,1516726661.100 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:41.131Z,1516726661.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:41.514Z,1516726661.514 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:41.528Z,1516726661.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:41.900Z,1516726661.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:41.923Z,1516726661.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:42.316Z,1516726662.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:42.331Z,1516726662.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:42.715Z,1516726662.715 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:42.729Z,1516726662.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:43.114Z,1516726663.114 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:43.129Z,1516726663.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:43.504Z,1516726663.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:43.523Z,1516726663.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:43.906Z,1516726663.906 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:43.921Z,1516726663.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:44.301Z,1516726664.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:44.324Z,1516726664.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:44.700Z,1516726664.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:44.729Z,1516726664.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:45.110Z,1516726665.110 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:45.124Z,1516726665.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:45.516Z,1516726665.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:45.530Z,1516726665.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:45.919Z,1516726665.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:45.934Z,1516726665.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:46.315Z,1516726666.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:46.331Z,1516726666.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:46.700Z,1516726666.700 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:46.736Z,1516726666.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:47.108Z,1516726667.108 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:47.123Z,1516726667.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:47.506Z,1516726667.506 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:47.521Z,1516726667.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:47.904Z,1516726667.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:47.923Z,1516726667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:48.315Z,1516726668.315 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:48.330Z,1516726668.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:48.718Z,1516726668.718 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:48.740Z,1516726668.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:49.115Z,1516726669.115 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:49.130Z,1516726669.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:49.503Z,1516726669.503 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:49.523Z,1516726669.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:49.903Z,1516726669.903 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:49.929Z,1516726669.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:50.308Z,1516726670.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:50.323Z,1516726670.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:50.701Z,1516726670.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:50.724Z,1516726670.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:51.105Z,1516726671.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:51.120Z,1516726671.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:51.516Z,1516726671.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:51.531Z,1516726671.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:51.919Z,1516726671.919 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:51.934Z,1516726671.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:52.316Z,1516726672.316 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:52.336Z,1516726672.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:52.694Z,1516726672.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:52.725Z,1516726672.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:53.099Z,1516726673.099 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:53.132Z,1516726673.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:53.507Z,1516726673.507 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:53.522Z,1516726673.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:53.901Z,1516726673.901 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:53.925Z,1516726673.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:54.319Z,1516726674.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:54.334Z,1516726674.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:54.719Z,1516726674.719 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:54.734Z,1516726674.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:55.112Z,1516726675.112 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:55.135Z,1516726675.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:55.498Z,1516726675.498 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:55.525Z,1516726675.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:55.897Z,1516726675.897 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:55.926Z,1516726675.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:56.296Z,1516726676.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:56.337Z,1516726676.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:56.701Z,1516726676.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:56.730Z,1516726676.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:57.096Z,1516726677.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:57.132Z,1516726677.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:57.516Z,1516726677.516 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:57.537Z,1516726677.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:57.920Z,1516726677.920 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:57.939Z,1516726677.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:58.306Z,1516726678.306 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:58.345Z,1516726678.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:58.694Z,1516726678.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:58.717Z,1516726678.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:59.096Z,1516726679.096 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:59.134Z,1516726679.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:59.497Z,1516726679.497 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:59.534Z,1516726679.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:57:59.895Z,1516726679.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:57:59.932Z,1516726679.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:00.307Z,1516726680.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:00.337Z,1516726680.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:00.720Z,1516726680.720 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:00.736Z,1516726680.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:01.107Z,1516726681.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:01.141Z,1516726681.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:01.496Z,1516726681.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:01.533Z,1516726681.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:01.900Z,1516726681.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:01.941Z,1516726681.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:02.294Z,1516726682.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:02.309Z,1516726682.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:02.697Z,1516726682.697 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:02.712Z,1516726682.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:03.101Z,1516726683.101 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:03.120Z,1516726683.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:03.511Z,1516726683.511 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:03.526Z,1516726683.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:03.915Z,1516726683.915 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:03.930Z,1516726683.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:04.307Z,1516726684.307 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:04.329Z,1516726684.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:04.702Z,1516726684.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:04.717Z,1516726684.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:05.105Z,1516726685.105 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:05.121Z,1516726685.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:05.505Z,1516726685.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:05.520Z,1516726685.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:05.904Z,1516726685.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:05.919Z,1516726685.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:06.308Z,1516726686.308 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:06.323Z,1516726686.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:06.711Z,1516726686.711 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:06.733Z,1516726686.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:07.107Z,1516726687.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:07.122Z,1516726687.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:07.504Z,1516726687.504 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:07.518Z,1516726687.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:07.904Z,1516726687.904 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:07.924Z,1516726687.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:08.301Z,1516726688.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:08.316Z,1516726688.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:08.702Z,1516726688.702 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T16:58:08.729Z,1516726688.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:09.123Z,1516726689.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:09.529Z,1516726689.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:09.930Z,1516726689.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:10.325Z,1516726690.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:10.718Z,1516726690.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:11.119Z,1516726691.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:11.520Z,1516726691.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:11.919Z,1516726691.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:12.329Z,1516726692.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:12.724Z,1516726692.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:13.129Z,1516726693.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:13.523Z,1516726693.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:13.919Z,1516726693.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:14.318Z,1516726694.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:14.725Z,1516726694.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:15.123Z,1516726695.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:15.529Z,1516726695.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:15.930Z,1516726695.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:16.325Z,1516726696.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:16.718Z,1516726696.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:16.720Z,1516726696.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:16.720Z,1516726696.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 273 2018-01-23T16:58:16.720Z,1516726696.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T16:58:16.733Z,1516726696.733 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T16:58:17.121Z,1516726697.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:17.133Z,1516726697.133 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T16:58:17.133Z,1516726697.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 273 2018-01-23T16:58:17.525Z,1516726697.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:17.526Z,1516726697.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T16:58:17.526Z,1516726697.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:58:17.527Z,1516726697.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:58:17.922Z,1516726697.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:18.329Z,1516726698.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:18.740Z,1516726698.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:19.129Z,1516726699.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:19.521Z,1516726699.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:19.933Z,1516726699.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:20.323Z,1516726700.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:20.722Z,1516726700.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:21.133Z,1516726701.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:21.531Z,1516726701.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:21.934Z,1516726701.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:22.336Z,1516726702.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:22.722Z,1516726702.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:23.133Z,1516726703.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:23.532Z,1516726703.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:23.931Z,1516726703.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:24.341Z,1516726704.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:24.735Z,1516726704.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:25.130Z,1516726705.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:25.521Z,1516726705.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:25.934Z,1516726705.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:26.321Z,1516726706.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:26.721Z,1516726706.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:27.131Z,1516726707.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:27.131Z,1516726707.131 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 273 2018-01-23T16:58:27.131Z,1516726707.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T16:58:27.133Z,1516726707.133 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:27.133Z,1516726707.133 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 273 2018-01-23T16:58:27.133Z,1516726707.133 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T16:58:27.154Z,1516726707.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T16:58:27.154Z,1516726707.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T16:58:27.541Z,1516726707.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T16:58:27.541Z,1516726707.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 273 2018-01-23T16:58:27.542Z,1516726707.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T16:58:27.542Z,1516726707.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 273 2018-01-23T16:58:27.934Z,1516726707.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T16:58:27.934Z,1516726707.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:58:27.935Z,1516726707.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:58:27.935Z,1516726707.935 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T16:58:27.936Z,1516726707.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T16:58:27.936Z,1516726707.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T16:58:28.347Z,1516726708.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T16:58:28.348Z,1516726708.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:28.731Z,1516726708.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T16:58:28.732Z,1516726708.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:29.131Z,1516726709.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T16:58:29.132Z,1516726709.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:29.524Z,1516726709.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T16:58:29.525Z,1516726709.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:29.932Z,1516726709.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T16:58:29.933Z,1516726709.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:30.337Z,1516726710.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T16:58:30.338Z,1516726710.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:30.740Z,1516726710.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T16:58:30.741Z,1516726710.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:31.122Z,1516726711.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T16:58:31.135Z,1516726711.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:31.519Z,1516726711.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T16:58:31.520Z,1516726711.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:31.944Z,1516726711.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T16:58:31.945Z,1516726711.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:32.349Z,1516726712.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T16:58:32.350Z,1516726712.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:32.752Z,1516726712.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T16:58:32.753Z,1516726712.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:33.126Z,1516726713.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T16:58:33.127Z,1516726713.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:33.521Z,1516726713.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T16:58:33.522Z,1516726713.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:33.923Z,1516726713.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T16:58:33.924Z,1516726713.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:34.334Z,1516726714.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T16:58:34.355Z,1516726714.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:34.726Z,1516726714.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T16:58:34.728Z,1516726714.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:35.126Z,1516726715.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T16:58:35.128Z,1516726715.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:35.532Z,1516726715.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T16:58:35.533Z,1516726715.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:35.931Z,1516726715.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T16:58:35.932Z,1516726715.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:36.333Z,1516726716.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T16:58:36.334Z,1516726716.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:36.735Z,1516726716.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T16:58:36.736Z,1516726716.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:37.130Z,1516726717.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T16:58:37.131Z,1516726717.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:37.523Z,1516726717.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T16:58:37.524Z,1516726717.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:37.921Z,1516726717.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T16:58:37.922Z,1516726717.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:41.032Z,1516726721.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T16:58:41.033Z,1516726721.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:41.192Z,1516726721.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T16:58:41.193Z,1516726721.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:41.533Z,1516726721.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T16:58:41.533Z,1516726721.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:41.928Z,1516726721.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T16:58:41.929Z,1516726721.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:42.322Z,1516726722.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T16:58:42.323Z,1516726722.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:42.724Z,1516726722.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T16:58:42.725Z,1516726722.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:43.119Z,1516726723.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T16:58:43.120Z,1516726723.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:43.533Z,1516726723.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T16:58:43.534Z,1516726723.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:43.932Z,1516726723.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T16:58:43.933Z,1516726723.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:44.333Z,1516726724.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T16:58:44.334Z,1516726724.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:44.724Z,1516726724.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T16:58:44.725Z,1516726724.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:45.120Z,1516726725.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T16:58:45.121Z,1516726725.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:45.521Z,1516726725.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T16:58:45.522Z,1516726725.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:45.921Z,1516726725.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T16:58:45.922Z,1516726725.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:46.329Z,1516726726.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T16:58:46.330Z,1516726726.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:46.733Z,1516726726.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T16:58:46.734Z,1516726726.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:47.130Z,1516726727.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:47.524Z,1516726727.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:47.920Z,1516726727.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:48.329Z,1516726728.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:48.732Z,1516726728.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:49.131Z,1516726729.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:49.521Z,1516726729.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:49.924Z,1516726729.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:50.334Z,1516726730.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:50.733Z,1516726730.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:51.133Z,1516726731.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:51.525Z,1516726731.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:51.928Z,1516726731.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:52.333Z,1516726732.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:52.733Z,1516726732.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:53.133Z,1516726733.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:53.519Z,1516726733.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:53.924Z,1516726733.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:54.329Z,1516726734.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:54.733Z,1516726734.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:55.131Z,1516726735.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:55.521Z,1516726735.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:55.924Z,1516726735.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:56.334Z,1516726736.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:56.733Z,1516726736.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:57.130Z,1516726737.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:57.525Z,1516726737.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:57.918Z,1516726737.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:58.330Z,1516726738.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:58.734Z,1516726738.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:59.130Z,1516726739.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:59.519Z,1516726739.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:58:59.924Z,1516726739.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:00.333Z,1516726740.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:00.732Z,1516726740.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:01.134Z,1516726741.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:01.523Z,1516726741.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:01.924Z,1516726741.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:02.341Z,1516726742.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:02.733Z,1516726742.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:03.133Z,1516726743.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:03.530Z,1516726743.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:03.922Z,1516726743.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:04.331Z,1516726744.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:04.741Z,1516726744.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:05.134Z,1516726745.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:05.520Z,1516726745.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:05.921Z,1516726745.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:06.329Z,1516726746.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:06.737Z,1516726746.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:07.137Z,1516726747.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:07.528Z,1516726747.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:07.919Z,1516726747.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:08.330Z,1516726748.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:08.733Z,1516726748.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:09.129Z,1516726749.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:09.526Z,1516726749.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:09.921Z,1516726749.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:10.330Z,1516726750.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:10.734Z,1516726750.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:11.129Z,1516726751.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:11.524Z,1516726751.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:11.926Z,1516726751.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:12.322Z,1516726752.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:12.731Z,1516726752.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:13.137Z,1516726753.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:13.530Z,1516726753.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:13.933Z,1516726753.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:14.330Z,1516726754.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:14.725Z,1516726754.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:15.121Z,1516726755.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:15.540Z,1516726755.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:15.937Z,1516726755.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:16.332Z,1516726756.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:16.722Z,1516726756.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:17.125Z,1516726757.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:17.532Z,1516726757.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:17.921Z,1516726757.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:18.330Z,1516726758.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:18.730Z,1516726758.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:19.131Z,1516726759.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:19.537Z,1516726759.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:19.922Z,1516726759.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:20.324Z,1516726760.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:20.722Z,1516726760.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:21.124Z,1516726761.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:21.530Z,1516726761.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:21.937Z,1516726761.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:22.337Z,1516726762.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:22.719Z,1516726762.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:23.129Z,1516726763.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:23.522Z,1516726763.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:23.928Z,1516726763.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:24.321Z,1516726764.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:24.729Z,1516726764.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:25.130Z,1516726765.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:25.537Z,1516726765.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:25.924Z,1516726765.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:26.320Z,1516726766.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:26.723Z,1516726766.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:27.124Z,1516726767.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:27.530Z,1516726767.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:27.937Z,1516726767.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:28.333Z,1516726768.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:28.717Z,1516726768.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:29.129Z,1516726769.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:29.522Z,1516726769.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:29.928Z,1516726769.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:30.321Z,1516726770.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:30.733Z,1516726770.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:31.130Z,1516726771.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:31.529Z,1516726771.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:31.922Z,1516726771.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:32.329Z,1516726772.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:32.730Z,1516726772.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:33.122Z,1516726773.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:33.532Z,1516726773.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:33.933Z,1516726773.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:34.335Z,1516726774.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:34.711Z,1516726774.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:35.117Z,1516726775.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:35.519Z,1516726775.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:35.924Z,1516726775.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:36.318Z,1516726776.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:36.725Z,1516726776.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:37.130Z,1516726777.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:37.534Z,1516726777.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:37.923Z,1516726777.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:41.025Z,1516726781.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:41.141Z,1516726781.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:41.521Z,1516726781.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:41.923Z,1516726781.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:42.329Z,1516726782.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:42.720Z,1516726782.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:43.126Z,1516726783.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:43.520Z,1516726783.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:43.896Z,1516726783.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:44.295Z,1516726784.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:44.724Z,1516726784.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:45.130Z,1516726785.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:45.531Z,1516726785.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:45.925Z,1516726785.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:46.309Z,1516726786.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:46.706Z,1516726786.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:47.109Z,1516726787.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:47.506Z,1516726787.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:47.937Z,1516726787.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:48.334Z,1516726788.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:48.709Z,1516726788.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:49.105Z,1516726789.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:49.504Z,1516726789.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:49.906Z,1516726789.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:50.315Z,1516726790.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:50.707Z,1516726790.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:51.110Z,1516726791.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:51.508Z,1516726791.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:51.908Z,1516726791.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:52.303Z,1516726792.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:52.704Z,1516726792.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:53.102Z,1516726793.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:53.507Z,1516726793.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:53.910Z,1516726793.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:54.306Z,1516726794.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:54.702Z,1516726794.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:55.103Z,1516726795.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:55.500Z,1516726795.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:55.912Z,1516726795.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:56.304Z,1516726796.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:56.664Z,1516726796.664 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T16:59:56.664Z,1516726796.664 [NAL9602] Data Fault, FailCount= 5 2018-01-23T16:59:56.664Z,1516726796.664 [NAL9602](ERROR): Data Fault 2018-01-23T16:59:56.715Z,1516726796.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:56.737Z,1516726796.737 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T16:59:56.738Z,1516726796.738 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T16:59:57.064Z,1516726797.064 [NAL9602](INFO): Powering down 2018-01-23T16:59:57.121Z,1516726797.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:57.145Z,1516726797.145 [CBIT](INFO): Critical error at 20180123T165956 2018-01-23T16:59:57.506Z,1516726797.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:57.907Z,1516726797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:58.312Z,1516726798.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:58.708Z,1516726798.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:59.101Z,1516726799.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:59.512Z,1516726799.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T16:59:59.901Z,1516726799.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:00.308Z,1516726800.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:00.706Z,1516726800.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:01.113Z,1516726801.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:01.513Z,1516726801.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:01.910Z,1516726801.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:02.309Z,1516726802.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:02.708Z,1516726802.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:03.111Z,1516726803.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:03.494Z,1516726803.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:03.894Z,1516726803.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:04.294Z,1516726804.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:04.698Z,1516726804.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:05.096Z,1516726805.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:05.506Z,1516726805.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:05.902Z,1516726805.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:06.296Z,1516726806.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:06.702Z,1516726806.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:07.098Z,1516726807.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:07.495Z,1516726807.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:07.905Z,1516726807.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:08.303Z,1516726808.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:08.698Z,1516726808.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:09.107Z,1516726809.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:09.501Z,1516726809.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:09.907Z,1516726809.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:10.308Z,1516726810.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:10.701Z,1516726810.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:11.099Z,1516726811.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:11.509Z,1516726811.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:11.907Z,1516726811.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:12.298Z,1516726812.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:12.713Z,1516726812.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:13.107Z,1516726813.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:13.503Z,1516726813.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:13.906Z,1516726813.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:14.305Z,1516726814.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:14.702Z,1516726814.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:15.117Z,1516726815.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:15.506Z,1516726815.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:15.906Z,1516726815.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:16.314Z,1516726816.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:16.709Z,1516726816.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:17.104Z,1516726817.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:17.512Z,1516726817.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:17.905Z,1516726817.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:18.306Z,1516726818.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:18.712Z,1516726818.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:19.103Z,1516726819.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:19.506Z,1516726819.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:19.915Z,1516726819.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:20.305Z,1516726820.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:20.700Z,1516726820.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:21.112Z,1516726821.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:21.524Z,1516726821.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:21.906Z,1516726821.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:22.311Z,1516726822.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:22.717Z,1516726822.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:23.103Z,1516726823.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:23.514Z,1516726823.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:23.909Z,1516726823.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:24.305Z,1516726824.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:24.714Z,1516726824.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:25.109Z,1516726825.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:25.505Z,1516726825.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:25.909Z,1516726825.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:26.312Z,1516726826.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:26.707Z,1516726826.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:27.116Z,1516726827.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:27.516Z,1516726827.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:27.893Z,1516726827.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x15640 got:0x16838 2018-01-23T17:00:27.917Z,1516726827.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:28.317Z,1516726828.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:28.728Z,1516726828.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:29.123Z,1516726829.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:29.501Z,1516726829.501 [PNI_TCM](ERROR): CRC does not match. Expected:0x30453 got:0x33304 2018-01-23T17:00:29.529Z,1516726829.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:29.928Z,1516726829.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:30.298Z,1516726830.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:30.732Z,1516726830.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:31.094Z,1516726831.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x7826 got:0x7618 2018-01-23T17:00:31.131Z,1516726831.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:31.505Z,1516726831.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:31.908Z,1516726831.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:32.307Z,1516726832.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:32.703Z,1516726832.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:33.112Z,1516726833.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:33.505Z,1516726833.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:33.934Z,1516726833.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:34.296Z,1516726834.296 [PNI_TCM](ERROR): CRC does not match. Expected:0x25443 got:0x24159 2018-01-23T17:00:34.313Z,1516726834.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:34.705Z,1516726834.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:35.102Z,1516726835.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:35.533Z,1516726835.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:35.908Z,1516726835.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:36.301Z,1516726836.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:36.703Z,1516726836.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:37.113Z,1516726837.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:37.503Z,1516726837.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:37.905Z,1516726837.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:38.307Z,1516726838.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:41.413Z,1516726841.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:41.541Z,1516726841.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:41.915Z,1516726841.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:42.308Z,1516726842.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:42.699Z,1516726842.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:43.112Z,1516726843.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:43.519Z,1516726843.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:43.905Z,1516726843.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:44.311Z,1516726844.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:44.701Z,1516726844.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:45.116Z,1516726845.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:45.505Z,1516726845.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:45.905Z,1516726845.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:46.299Z,1516726846.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:46.714Z,1516726846.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:47.102Z,1516726847.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:47.498Z,1516726847.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:47.904Z,1516726847.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:48.302Z,1516726848.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:48.700Z,1516726848.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:49.104Z,1516726849.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:49.513Z,1516726849.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:49.907Z,1516726849.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:50.307Z,1516726850.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:50.712Z,1516726850.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:51.109Z,1516726851.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:51.504Z,1516726851.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:51.905Z,1516726851.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:52.300Z,1516726852.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:52.708Z,1516726852.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:53.108Z,1516726853.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:53.496Z,1516726853.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:53.890Z,1516726853.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:54.322Z,1516726854.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:54.688Z,1516726854.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:55.090Z,1516726855.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:55.498Z,1516726855.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:55.897Z,1516726855.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:56.303Z,1516726856.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:56.700Z,1516726856.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:57.094Z,1516726857.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:57.508Z,1516726857.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:57.899Z,1516726857.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:58.296Z,1516726858.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:58.702Z,1516726858.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:59.108Z,1516726859.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:59.496Z,1516726859.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:00:59.898Z,1516726859.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:00.305Z,1516726860.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:00.695Z,1516726860.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:01.097Z,1516726861.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:01.497Z,1516726861.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:01.897Z,1516726861.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:02.299Z,1516726862.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:02.704Z,1516726862.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:03.095Z,1516726863.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:03.508Z,1516726863.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:03.897Z,1516726863.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:04.295Z,1516726864.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:04.708Z,1516726864.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:05.097Z,1516726865.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:05.497Z,1516726865.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:05.900Z,1516726865.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:06.297Z,1516726866.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:06.735Z,1516726866.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:07.105Z,1516726867.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:07.508Z,1516726867.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:07.898Z,1516726867.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:08.312Z,1516726868.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:08.700Z,1516726868.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:09.099Z,1516726869.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:09.513Z,1516726869.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:09.902Z,1516726869.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:10.298Z,1516726870.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:10.698Z,1516726870.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:11.105Z,1516726871.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:11.498Z,1516726871.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:11.898Z,1516726871.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:12.298Z,1516726872.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:12.696Z,1516726872.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:13.097Z,1516726873.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:13.497Z,1516726873.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:13.897Z,1516726873.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:14.297Z,1516726874.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:14.736Z,1516726874.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:15.108Z,1516726875.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:15.501Z,1516726875.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:15.901Z,1516726875.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:16.300Z,1516726876.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:16.707Z,1516726876.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:17.105Z,1516726877.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:17.509Z,1516726877.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:17.903Z,1516726877.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:17.905Z,1516726877.905 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:17.905Z,1516726877.905 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 274 2018-01-23T17:01:17.905Z,1516726877.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:01:17.917Z,1516726877.917 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:01:18.309Z,1516726878.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:18.321Z,1516726878.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:01:18.321Z,1516726878.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 274 2018-01-23T17:01:18.696Z,1516726878.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:18.697Z,1516726878.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:01:18.698Z,1516726878.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:01:18.698Z,1516726878.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:01:19.110Z,1516726879.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:19.513Z,1516726879.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:19.910Z,1516726879.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:20.294Z,1516726880.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:20.694Z,1516726880.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:21.088Z,1516726881.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:21.496Z,1516726881.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:21.894Z,1516726881.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:22.294Z,1516726882.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:22.694Z,1516726882.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:23.098Z,1516726883.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:23.491Z,1516726883.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:23.902Z,1516726883.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:24.298Z,1516726884.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:24.692Z,1516726884.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:25.102Z,1516726885.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:25.498Z,1516726885.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:25.898Z,1516726885.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:26.294Z,1516726886.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:26.698Z,1516726886.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:27.095Z,1516726887.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:27.502Z,1516726887.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:27.898Z,1516726887.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:28.306Z,1516726888.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:28.306Z,1516726888.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 274 2018-01-23T17:01:28.306Z,1516726888.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:01:28.328Z,1516726888.328 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:28.328Z,1516726888.328 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 274 2018-01-23T17:01:28.328Z,1516726888.328 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:01:28.357Z,1516726888.357 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:01:28.358Z,1516726888.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:01:28.736Z,1516726888.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:01:28.736Z,1516726888.736 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 274 2018-01-23T17:01:28.736Z,1516726888.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:01:28.737Z,1516726888.737 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 274 2018-01-23T17:01:29.127Z,1516726889.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:01:29.127Z,1516726889.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:01:29.128Z,1516726889.128 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:01:29.128Z,1516726889.128 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:01:29.129Z,1516726889.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:01:29.129Z,1516726889.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:01:29.528Z,1516726889.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:01:29.529Z,1516726889.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:29.924Z,1516726889.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:01:29.925Z,1516726889.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:30.326Z,1516726890.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:01:30.327Z,1516726890.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:30.720Z,1516726890.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:01:30.721Z,1516726890.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:31.144Z,1516726891.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:01:31.145Z,1516726891.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:31.506Z,1516726891.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:01:31.508Z,1516726891.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:31.899Z,1516726891.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:01:31.900Z,1516726891.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:32.321Z,1516726892.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:01:32.322Z,1516726892.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:32.701Z,1516726892.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:01:32.702Z,1516726892.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:33.112Z,1516726893.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:01:33.113Z,1516726893.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:33.521Z,1516726893.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:01:33.522Z,1516726893.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:33.921Z,1516726893.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:01:33.921Z,1516726893.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:34.329Z,1516726894.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:01:34.330Z,1516726894.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:34.732Z,1516726894.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:01:34.733Z,1516726894.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:35.140Z,1516726895.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:01:35.141Z,1516726895.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:35.506Z,1516726895.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:01:35.527Z,1516726895.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:35.972Z,1516726895.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T17:01:35.973Z,1516726895.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:36.332Z,1516726896.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:01:36.333Z,1516726896.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:36.711Z,1516726896.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:01:36.712Z,1516726896.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:37.150Z,1516726897.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:01:37.151Z,1516726897.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:37.154Z,1516726897.154 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:01:37.154Z,1516726897.154 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:01:37.154Z,1516726897.154 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:01:37.154Z,1516726897.154 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:01:37.518Z,1516726897.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:01:37.527Z,1516726897.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:37.530Z,1516726897.530 [Default:CheckIn:D] Stopped 2018-01-23T17:01:37.530Z,1516726897.530 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:01:37.909Z,1516726897.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:01:37.910Z,1516726897.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:37.918Z,1516726897.918 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 823.757812 min 2018-01-23T17:01:37.918Z,1516726897.918 [Default:CheckIn:E] Stopped 2018-01-23T17:01:37.918Z,1516726897.918 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:01:37.918Z,1516726897.918 [Default:CheckIn] Stopped 2018-01-23T17:01:37.918Z,1516726897.918 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:01:37.943Z,1516726897.943 [Default:CheckIn](INFO): Running loop #81 2018-01-23T17:01:37.943Z,1516726897.943 [Default:CheckIn] Running Loop=81 2018-01-23T17:01:37.943Z,1516726897.943 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:01:37.943Z,1516726897.943 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:01:38.322Z,1516726898.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:01:38.323Z,1516726898.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:38.725Z,1516726898.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:01:38.726Z,1516726898.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:44.700Z,1516726904.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:01:44.701Z,1516726904.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:44.841Z,1516726904.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T17:01:44.842Z,1516726904.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:45.259Z,1516726905.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s. 2018-01-23T17:01:45.260Z,1516726905.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:45.634Z,1516726905.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T17:01:45.640Z,1516726905.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:46.038Z,1516726906.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T17:01:46.047Z,1516726906.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:46.440Z,1516726906.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T17:01:46.441Z,1516726906.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:46.833Z,1516726906.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T17:01:46.833Z,1516726906.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:47.232Z,1516726907.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T17:01:47.233Z,1516726907.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:47.630Z,1516726907.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T17:01:47.631Z,1516726907.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:48.018Z,1516726908.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T17:01:48.035Z,1516726908.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:48.417Z,1516726908.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:48.817Z,1516726908.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:49.250Z,1516726909.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:49.622Z,1516726909.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:50.017Z,1516726910.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:50.410Z,1516726910.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:50.825Z,1516726910.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:51.237Z,1516726911.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:51.625Z,1516726911.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:52.068Z,1516726912.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:52.426Z,1516726912.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:52.812Z,1516726912.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:53.229Z,1516726913.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:53.652Z,1516726913.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:54.045Z,1516726914.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:54.461Z,1516726914.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:54.849Z,1516726914.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:55.211Z,1516726915.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:55.641Z,1516726915.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:56.039Z,1516726916.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:56.413Z,1516726916.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:56.814Z,1516726916.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:56.856Z,1516726916.856 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:01:56.856Z,1516726916.856 [NAL9602] No Fault, FailCount= 5 2018-01-23T17:01:57.182Z,1516726917.182 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:01:57.244Z,1516726917.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:57.620Z,1516726917.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:58.033Z,1516726918.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:58.424Z,1516726918.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:58.851Z,1516726918.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:59.217Z,1516726919.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:01:59.619Z,1516726919.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:00.026Z,1516726920.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:00.436Z,1516726920.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:00.823Z,1516726920.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:01.217Z,1516726921.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:01.618Z,1516726921.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:02.037Z,1516726922.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:02.412Z,1516726922.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:02.822Z,1516726922.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:03.219Z,1516726923.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:03.629Z,1516726923.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:04.018Z,1516726924.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:04.417Z,1516726924.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:04.818Z,1516726924.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:05.214Z,1516726925.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:05.614Z,1516726925.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:06.015Z,1516726926.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:06.418Z,1516726926.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:06.814Z,1516726926.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:07.215Z,1516726927.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:07.614Z,1516726927.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:08.027Z,1516726928.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:08.376Z,1516726928.376 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:02:08.453Z,1516726928.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:08.814Z,1516726928.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:09.229Z,1516726929.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:09.632Z,1516726929.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:10.048Z,1516726930.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:10.422Z,1516726930.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:10.828Z,1516726930.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:11.226Z,1516726931.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:11.623Z,1516726931.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:12.030Z,1516726932.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:12.435Z,1516726932.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:12.831Z,1516726932.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:13.213Z,1516726933.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:13.627Z,1516726933.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:14.032Z,1516726934.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:14.405Z,1516726934.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:14.832Z,1516726934.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:15.241Z,1516726935.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:15.640Z,1516726935.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:16.040Z,1516726936.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:16.411Z,1516726936.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:16.841Z,1516726936.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:17.217Z,1516726937.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:17.623Z,1516726937.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:18.022Z,1516726938.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:18.429Z,1516726938.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:18.828Z,1516726938.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:19.213Z,1516726939.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:19.624Z,1516726939.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:20.020Z,1516726940.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:20.416Z,1516726940.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:20.821Z,1516726940.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:21.226Z,1516726941.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:21.625Z,1516726941.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:22.025Z,1516726942.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:22.429Z,1516726942.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:22.821Z,1516726942.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:23.222Z,1516726943.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:23.630Z,1516726943.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:24.031Z,1516726944.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:24.431Z,1516726944.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:24.832Z,1516726944.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:25.217Z,1516726945.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:25.624Z,1516726945.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:26.023Z,1516726946.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:26.416Z,1516726946.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:26.833Z,1516726946.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:27.240Z,1516726947.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:27.638Z,1516726947.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:28.051Z,1516726948.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:28.440Z,1516726948.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:28.812Z,1516726948.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:29.217Z,1516726949.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:29.635Z,1516726949.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:30.030Z,1516726950.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:30.426Z,1516726950.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:30.833Z,1516726950.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:31.225Z,1516726951.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:31.614Z,1516726951.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:32.022Z,1516726952.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:32.418Z,1516726952.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:32.816Z,1516726952.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:33.233Z,1516726953.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:33.630Z,1516726953.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:34.026Z,1516726954.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:34.433Z,1516726954.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:34.824Z,1516726954.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:35.225Z,1516726955.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:35.632Z,1516726955.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:36.035Z,1516726956.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:36.434Z,1516726956.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:36.840Z,1516726956.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:37.224Z,1516726957.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:37.629Z,1516726957.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:38.033Z,1516726958.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:38.409Z,1516726958.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:38.837Z,1516726958.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:41.937Z,1516726961.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:42.081Z,1516726962.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:42.434Z,1516726962.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:42.808Z,1516726962.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:43.204Z,1516726963.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:43.604Z,1516726963.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:44.006Z,1516726964.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:44.418Z,1516726964.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:44.813Z,1516726964.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:45.207Z,1516726965.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:45.607Z,1516726965.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:46.002Z,1516726966.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:46.404Z,1516726966.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:46.803Z,1516726966.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:47.213Z,1516726967.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:47.608Z,1516726967.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:48.014Z,1516726968.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:48.404Z,1516726968.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:48.813Z,1516726968.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:49.202Z,1516726969.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:49.605Z,1516726969.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:50.015Z,1516726970.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:50.421Z,1516726970.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:50.821Z,1516726970.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:51.207Z,1516726971.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:51.607Z,1516726971.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:52.005Z,1516726972.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:52.408Z,1516726972.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:52.805Z,1516726972.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:53.213Z,1516726973.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:53.624Z,1516726973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:54.013Z,1516726974.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:54.405Z,1516726974.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:54.808Z,1516726974.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:55.205Z,1516726975.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:55.605Z,1516726975.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:56.014Z,1516726976.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:56.421Z,1516726976.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:56.821Z,1516726976.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:57.204Z,1516726977.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:57.606Z,1516726977.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:58.013Z,1516726978.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:58.405Z,1516726978.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:58.805Z,1516726978.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:59.213Z,1516726979.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:02:59.617Z,1516726979.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:00.017Z,1516726980.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:00.417Z,1516726980.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:00.805Z,1516726980.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:01.207Z,1516726981.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:01.614Z,1516726981.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:02.015Z,1516726982.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:02.418Z,1516726982.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:02.814Z,1516726982.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:03.212Z,1516726983.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:03.613Z,1516726983.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:04.006Z,1516726984.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:04.409Z,1516726984.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:04.805Z,1516726984.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:05.214Z,1516726985.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:05.617Z,1516726985.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:06.013Z,1516726986.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:06.417Z,1516726986.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:06.813Z,1516726986.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:07.208Z,1516726987.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:07.606Z,1516726987.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:08.021Z,1516726988.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:08.417Z,1516726988.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:08.814Z,1516726988.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:09.216Z,1516726989.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:09.613Z,1516726989.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:10.009Z,1516726990.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:10.408Z,1516726990.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:10.809Z,1516726990.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:11.214Z,1516726991.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:11.624Z,1516726991.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:12.014Z,1516726992.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:12.405Z,1516726992.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:12.819Z,1516726992.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:13.213Z,1516726993.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:13.612Z,1516726993.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:14.024Z,1516726994.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:14.420Z,1516726994.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:14.818Z,1516726994.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:15.210Z,1516726995.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:15.606Z,1516726995.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:16.014Z,1516726996.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:16.419Z,1516726996.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:16.816Z,1516726996.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:17.218Z,1516726997.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:17.633Z,1516726997.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:18.017Z,1516726998.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:18.412Z,1516726998.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:18.819Z,1516726998.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:19.210Z,1516726999.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:19.612Z,1516726999.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:20.016Z,1516727000.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:20.420Z,1516727000.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:20.814Z,1516727000.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:21.217Z,1516727001.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:21.601Z,1516727001.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:22.021Z,1516727002.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:22.419Z,1516727002.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:22.821Z,1516727002.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:23.215Z,1516727003.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:23.617Z,1516727003.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:24.018Z,1516727004.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:24.421Z,1516727004.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:24.820Z,1516727004.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:25.215Z,1516727005.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:25.617Z,1516727005.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:26.025Z,1516727006.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:26.423Z,1516727006.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:26.824Z,1516727006.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:27.217Z,1516727007.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:27.593Z,1516727007.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:28.017Z,1516727008.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:28.421Z,1516727008.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:28.825Z,1516727008.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:29.196Z,1516727009.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:29.599Z,1516727009.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:30.024Z,1516727010.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:30.430Z,1516727010.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:30.829Z,1516727010.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:31.204Z,1516727011.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:31.605Z,1516727011.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:32.009Z,1516727012.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:32.414Z,1516727012.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:32.806Z,1516727012.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:33.208Z,1516727013.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:33.601Z,1516727013.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:34.006Z,1516727014.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:34.409Z,1516727014.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:34.818Z,1516727014.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:35.205Z,1516727015.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:35.604Z,1516727015.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:36.013Z,1516727016.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:36.414Z,1516727016.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:36.810Z,1516727016.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:37.209Z,1516727017.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:37.603Z,1516727017.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:38.016Z,1516727018.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:38.409Z,1516727018.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:38.813Z,1516727018.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:39.210Z,1516727019.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:42.338Z,1516727022.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:42.485Z,1516727022.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:42.811Z,1516727022.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:43.216Z,1516727023.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:43.608Z,1516727023.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:44.004Z,1516727024.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:44.404Z,1516727024.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:44.803Z,1516727024.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:45.239Z,1516727025.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:45.621Z,1516727025.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:46.017Z,1516727026.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:46.413Z,1516727026.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:46.808Z,1516727026.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:47.208Z,1516727027.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:47.602Z,1516727027.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:48.021Z,1516727028.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:48.414Z,1516727028.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:48.817Z,1516727028.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:49.208Z,1516727029.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:49.612Z,1516727029.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:50.018Z,1516727030.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:50.423Z,1516727030.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:50.819Z,1516727030.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:51.212Z,1516727031.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:51.615Z,1516727031.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:52.015Z,1516727032.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:52.422Z,1516727032.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:52.820Z,1516727032.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:53.193Z,1516727033.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:53.620Z,1516727033.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:53.997Z,1516727033.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:54.425Z,1516727034.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:54.833Z,1516727034.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:55.232Z,1516727035.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:55.598Z,1516727035.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:56.026Z,1516727036.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:56.433Z,1516727036.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:56.805Z,1516727036.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:57.230Z,1516727037.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:57.634Z,1516727037.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:58.033Z,1516727038.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:58.433Z,1516727038.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:58.804Z,1516727038.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:59.201Z,1516727039.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:03:59.600Z,1516727039.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:00.002Z,1516727040.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:00.406Z,1516727040.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:00.810Z,1516727040.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:01.212Z,1516727041.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:01.600Z,1516727041.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:02.009Z,1516727042.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:02.404Z,1516727042.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:02.804Z,1516727042.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:03.206Z,1516727043.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:03.609Z,1516727043.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:04.006Z,1516727044.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:04.403Z,1516727044.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:04.804Z,1516727044.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:05.202Z,1516727045.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:05.602Z,1516727045.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:06.008Z,1516727046.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:06.413Z,1516727046.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:06.818Z,1516727046.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:07.209Z,1516727047.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:07.602Z,1516727047.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:08.003Z,1516727048.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:08.404Z,1516727048.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:08.803Z,1516727048.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:09.213Z,1516727049.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:09.609Z,1516727049.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:10.013Z,1516727050.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:10.409Z,1516727050.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:10.804Z,1516727050.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:11.203Z,1516727051.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:11.611Z,1516727051.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:12.004Z,1516727052.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:12.413Z,1516727052.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:12.821Z,1516727052.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:13.220Z,1516727053.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:13.601Z,1516727053.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:14.011Z,1516727054.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:14.381Z,1516727054.381 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:04:14.418Z,1516727054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:14.780Z,1516727054.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:04:14.817Z,1516727054.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:15.203Z,1516727055.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:04:15.218Z,1516727055.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:15.624Z,1516727055.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:16.014Z,1516727056.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:16.411Z,1516727056.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:16.816Z,1516727056.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:17.213Z,1516727057.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:17.612Z,1516727057.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:18.016Z,1516727058.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:18.416Z,1516727058.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:18.821Z,1516727058.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:18.823Z,1516727058.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:18.823Z,1516727058.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 275 2018-01-23T17:04:18.823Z,1516727058.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:04:18.835Z,1516727058.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:04:19.215Z,1516727059.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:19.227Z,1516727059.227 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:04:19.228Z,1516727059.228 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 275 2018-01-23T17:04:19.613Z,1516727059.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:19.614Z,1516727059.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:04:19.614Z,1516727059.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:04:19.619Z,1516727059.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:04:20.016Z,1516727060.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:20.425Z,1516727060.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:20.819Z,1516727060.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:21.225Z,1516727061.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:21.630Z,1516727061.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:22.025Z,1516727062.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:22.417Z,1516727062.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:22.795Z,1516727062.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:23.197Z,1516727063.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:23.624Z,1516727063.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:24.003Z,1516727064.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:24.406Z,1516727064.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:24.831Z,1516727064.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:25.235Z,1516727065.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:25.600Z,1516727065.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:26.008Z,1516727066.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:26.404Z,1516727066.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:26.808Z,1516727066.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:27.233Z,1516727067.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:27.609Z,1516727067.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:28.034Z,1516727068.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:28.405Z,1516727068.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:28.804Z,1516727068.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:29.203Z,1516727069.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:29.203Z,1516727069.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 275 2018-01-23T17:04:29.203Z,1516727069.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:04:29.205Z,1516727069.205 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:29.205Z,1516727069.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 275 2018-01-23T17:04:29.205Z,1516727069.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:04:29.218Z,1516727069.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:04:29.218Z,1516727069.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:04:29.643Z,1516727069.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:04:29.643Z,1516727069.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 275 2018-01-23T17:04:29.643Z,1516727069.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:04:29.643Z,1516727069.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 275 2018-01-23T17:04:30.006Z,1516727070.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:04:30.007Z,1516727070.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:04:30.007Z,1516727070.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:04:30.007Z,1516727070.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:04:30.008Z,1516727070.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:04:30.008Z,1516727070.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:04:30.416Z,1516727070.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:04:30.417Z,1516727070.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:30.818Z,1516727070.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:04:30.819Z,1516727070.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:31.215Z,1516727071.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:04:31.216Z,1516727071.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:31.606Z,1516727071.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:04:31.608Z,1516727071.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:32.020Z,1516727072.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:04:32.021Z,1516727072.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:32.414Z,1516727072.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:04:32.415Z,1516727072.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:32.812Z,1516727072.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:04:32.813Z,1516727072.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:33.217Z,1516727073.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:04:33.218Z,1516727073.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:33.620Z,1516727073.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:04:33.621Z,1516727073.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:34.021Z,1516727074.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:04:34.022Z,1516727074.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:34.043Z,1516727074.043 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:04:34.406Z,1516727074.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:04:34.407Z,1516727074.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:34.814Z,1516727074.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:04:34.815Z,1516727074.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:35.217Z,1516727075.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:04:35.218Z,1516727075.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:35.612Z,1516727075.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:04:35.613Z,1516727075.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:36.005Z,1516727076.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:04:36.006Z,1516727076.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:36.425Z,1516727076.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:04:36.426Z,1516727076.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:36.823Z,1516727076.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:04:36.824Z,1516727076.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:37.216Z,1516727077.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:04:37.217Z,1516727077.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:37.601Z,1516727077.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:04:37.602Z,1516727077.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:38.014Z,1516727078.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:04:38.016Z,1516727078.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:38.416Z,1516727078.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:04:38.417Z,1516727078.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:38.814Z,1516727078.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:04:38.816Z,1516727078.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:39.221Z,1516727079.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:04:39.222Z,1516727079.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:39.628Z,1516727079.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:04:39.629Z,1516727079.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:42.713Z,1516727082.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T17:04:42.714Z,1516727082.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:42.859Z,1516727082.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T17:04:42.860Z,1516727082.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:43.184Z,1516727083.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:04:43.185Z,1516727083.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:43.584Z,1516727083.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:04:43.585Z,1516727083.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:43.979Z,1516727083.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:04:43.980Z,1516727083.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:44.384Z,1516727084.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:04:44.385Z,1516727084.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:44.785Z,1516727084.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:04:44.786Z,1516727084.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:45.184Z,1516727085.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:04:45.185Z,1516727085.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:45.578Z,1516727085.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:04:45.579Z,1516727085.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:45.979Z,1516727085.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:04:45.980Z,1516727085.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:46.380Z,1516727086.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:04:46.381Z,1516727086.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:46.778Z,1516727086.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:04:46.780Z,1516727086.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:47.185Z,1516727087.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:04:47.186Z,1516727087.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:47.588Z,1516727087.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:04:47.589Z,1516727087.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:47.986Z,1516727087.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:04:47.987Z,1516727087.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:48.379Z,1516727088.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:04:48.380Z,1516727088.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:48.779Z,1516727088.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:04:48.780Z,1516727088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:49.187Z,1516727089.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:04:49.188Z,1516727089.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:49.580Z,1516727089.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:49.979Z,1516727089.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:50.389Z,1516727090.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:50.789Z,1516727090.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:51.189Z,1516727091.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:51.584Z,1516727091.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:51.980Z,1516727091.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:52.384Z,1516727092.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:52.789Z,1516727092.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:53.186Z,1516727093.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:53.593Z,1516727093.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:53.993Z,1516727093.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:54.384Z,1516727094.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:54.778Z,1516727094.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:55.189Z,1516727095.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:55.582Z,1516727095.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:55.980Z,1516727095.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:56.393Z,1516727096.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:56.786Z,1516727096.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:57.189Z,1516727097.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:57.585Z,1516727097.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:57.980Z,1516727097.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:58.381Z,1516727098.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:58.786Z,1516727098.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:59.186Z,1516727099.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:59.590Z,1516727099.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:04:59.989Z,1516727099.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:00.380Z,1516727100.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:00.779Z,1516727100.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:01.188Z,1516727101.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:01.583Z,1516727101.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:01.979Z,1516727101.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:02.393Z,1516727102.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:02.790Z,1516727102.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:03.189Z,1516727103.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:03.583Z,1516727103.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:03.980Z,1516727103.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:04.381Z,1516727104.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:04.779Z,1516727104.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:05.193Z,1516727105.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:05.586Z,1516727105.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:05.993Z,1516727105.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:06.384Z,1516727106.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:06.780Z,1516727106.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:07.181Z,1516727107.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:07.580Z,1516727107.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:07.981Z,1516727107.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:08.385Z,1516727108.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:08.797Z,1516727108.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:09.186Z,1516727109.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:09.593Z,1516727109.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:09.981Z,1516727109.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:10.385Z,1516727110.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:10.784Z,1516727110.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:11.191Z,1516727111.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:11.599Z,1516727111.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:11.990Z,1516727111.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:12.381Z,1516727112.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:12.782Z,1516727112.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:13.190Z,1516727113.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:13.593Z,1516727113.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:13.989Z,1516727113.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:14.388Z,1516727114.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:14.779Z,1516727114.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:15.189Z,1516727115.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:15.593Z,1516727115.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:16.000Z,1516727116.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:16.382Z,1516727116.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:16.789Z,1516727116.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:17.190Z,1516727117.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:17.601Z,1516727117.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:17.993Z,1516727117.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:18.380Z,1516727118.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:18.781Z,1516727118.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:19.205Z,1516727119.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:19.601Z,1516727119.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:19.994Z,1516727119.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:20.388Z,1516727120.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:20.787Z,1516727120.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:21.194Z,1516727121.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:21.596Z,1516727121.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:21.991Z,1516727121.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:22.388Z,1516727122.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:22.793Z,1516727122.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:23.191Z,1516727123.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:23.593Z,1516727123.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:23.993Z,1516727123.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:24.393Z,1516727124.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:24.781Z,1516727124.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:25.200Z,1516727125.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:25.595Z,1516727125.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:26.005Z,1516727126.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:26.389Z,1516727126.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:26.792Z,1516727126.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:27.199Z,1516727127.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:27.612Z,1516727127.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:27.995Z,1516727127.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:28.388Z,1516727128.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:28.797Z,1516727128.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:29.200Z,1516727129.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:29.603Z,1516727129.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:29.994Z,1516727129.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:30.381Z,1516727130.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:30.781Z,1516727130.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:31.201Z,1516727131.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:31.605Z,1516727131.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:32.002Z,1516727132.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:32.409Z,1516727132.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:32.809Z,1516727132.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:33.182Z,1516727133.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:33.602Z,1516727133.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:34.012Z,1516727134.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:34.381Z,1516727134.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:34.784Z,1516727134.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:35.185Z,1516727135.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:35.589Z,1516727135.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:36.012Z,1516727136.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:36.382Z,1516727136.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:36.785Z,1516727136.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:37.185Z,1516727137.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:37.587Z,1516727137.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:38.012Z,1516727138.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:38.383Z,1516727138.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:38.792Z,1516727138.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:39.187Z,1516727139.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:39.598Z,1516727139.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:39.997Z,1516727139.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:43.073Z,1516727143.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:43.193Z,1516727143.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:43.569Z,1516727143.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:43.967Z,1516727143.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:44.349Z,1516727144.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:44.742Z,1516727144.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:45.141Z,1516727145.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:45.540Z,1516727145.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:45.942Z,1516727145.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:46.356Z,1516727146.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:46.761Z,1516727146.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:47.151Z,1516727147.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:47.545Z,1516727147.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:47.944Z,1516727147.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:48.351Z,1516727148.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:48.762Z,1516727148.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:49.144Z,1516727149.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:49.550Z,1516727149.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:49.954Z,1516727149.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:50.351Z,1516727150.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:50.747Z,1516727150.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:51.143Z,1516727151.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:51.547Z,1516727151.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:51.949Z,1516727151.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:52.351Z,1516727152.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:52.753Z,1516727152.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:53.154Z,1516727153.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:53.547Z,1516727153.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:53.949Z,1516727153.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:54.347Z,1516727154.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:54.749Z,1516727154.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:55.137Z,1516727155.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:55.561Z,1516727155.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:55.958Z,1516727155.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:56.359Z,1516727156.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:56.757Z,1516727156.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:57.155Z,1516727157.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:57.552Z,1516727157.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:57.957Z,1516727157.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:58.362Z,1516727158.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:58.762Z,1516727158.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:59.166Z,1516727159.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:59.540Z,1516727159.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:05:59.948Z,1516727159.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:00.343Z,1516727160.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:00.745Z,1516727160.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:01.140Z,1516727161.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:01.551Z,1516727161.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:01.960Z,1516727161.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:02.349Z,1516727162.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:02.739Z,1516727162.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:03.144Z,1516727163.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:03.542Z,1516727163.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:03.941Z,1516727163.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:04.350Z,1516727164.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:04.749Z,1516727164.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:05.149Z,1516727165.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:05.544Z,1516727165.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:05.949Z,1516727165.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:06.353Z,1516727166.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:06.748Z,1516727166.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:07.149Z,1516727167.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:07.554Z,1516727167.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:07.968Z,1516727167.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:08.357Z,1516727168.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:08.753Z,1516727168.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:09.149Z,1516727169.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:09.552Z,1516727169.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:09.952Z,1516727169.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:10.366Z,1516727170.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:10.760Z,1516727170.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:11.161Z,1516727171.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:11.545Z,1516727171.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:11.932Z,1516727171.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:12.337Z,1516727172.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:12.762Z,1516727172.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:13.136Z,1516727173.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:13.546Z,1516727173.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:13.950Z,1516727173.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:14.342Z,1516727174.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:14.738Z,1516727174.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:15.149Z,1516727175.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:15.542Z,1516727175.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:15.949Z,1516727175.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:16.354Z,1516727176.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:16.753Z,1516727176.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:17.150Z,1516727177.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:17.553Z,1516727177.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:17.945Z,1516727177.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:18.341Z,1516727178.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:18.754Z,1516727178.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:19.147Z,1516727179.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:19.551Z,1516727179.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:19.955Z,1516727179.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:20.361Z,1516727180.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:20.742Z,1516727180.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:21.149Z,1516727181.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:21.552Z,1516727181.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:21.943Z,1516727181.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:22.369Z,1516727182.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:22.759Z,1516727182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:23.154Z,1516727183.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:23.558Z,1516727183.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:23.946Z,1516727183.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:24.352Z,1516727184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:24.744Z,1516727184.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:25.157Z,1516727185.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:25.560Z,1516727185.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:25.970Z,1516727185.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:26.361Z,1516727186.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:26.730Z,1516727186.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:27.139Z,1516727187.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:27.537Z,1516727187.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:27.939Z,1516727187.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:28.346Z,1516727188.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:28.754Z,1516727188.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:29.146Z,1516727189.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:29.540Z,1516727189.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:29.939Z,1516727189.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:30.347Z,1516727190.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:30.755Z,1516727190.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:31.171Z,1516727191.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:31.561Z,1516727191.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:31.999Z,1516727191.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:32.358Z,1516727192.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:32.780Z,1516727192.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:33.180Z,1516727193.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:33.571Z,1516727193.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:33.943Z,1516727193.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:34.367Z,1516727194.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:34.746Z,1516727194.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:35.188Z,1516727195.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:35.584Z,1516727195.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:35.955Z,1516727195.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:36.355Z,1516727196.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:36.757Z,1516727196.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:37.154Z,1516727197.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:37.565Z,1516727197.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:38.001Z,1516727198.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:38.005Z,1516727198.005 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:01:37.9Z 2018-01-23T17:06:38.005Z,1516727198.005 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:06:38.005Z,1516727198.005 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:06:38.377Z,1516727198.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:39.429Z,1516727199.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:39.621Z,1516727199.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:45.920Z,1516727205.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:46.007Z,1516727206.007 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0324.lzma 2018-01-23T17:06:46.111Z,1516727206.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:46.462Z,1516727206.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:46.782Z,1516727206.782 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0324.lzma.bak 2018-01-23T17:06:46.782Z,1516727206.782 [DataOverHttps](INFO): SBD MOMSN=7756036 2018-01-23T17:06:46.862Z,1516727206.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:47.736Z,1516727207.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:47.883Z,1516727207.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:53.958Z,1516727213.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:54.158Z,1516727214.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:54.496Z,1516727214.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:54.877Z,1516727214.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:55.287Z,1516727215.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:55.680Z,1516727215.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:58.992Z,1516727218.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:59.068Z,1516727219.068 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0325.lzma 2018-01-23T17:06:59.138Z,1516727219.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:59.477Z,1516727219.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:06:59.814Z,1516727219.814 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0325.lzma.bak 2018-01-23T17:06:59.814Z,1516727219.814 [DataOverHttps](INFO): SBD MOMSN=7756039 2018-01-23T17:06:59.886Z,1516727219.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:00.502Z,1516727220.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:00.505Z,1516727220.505 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:07:00.505Z,1516727220.505 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:07:00.505Z,1516727220.505 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:07:00.676Z,1516727220.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:03.803Z,1516727223.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:03.953Z,1516727223.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:04.309Z,1516727224.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:04.703Z,1516727224.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:05.095Z,1516727225.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:05.498Z,1516727225.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:05.900Z,1516727225.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:06.299Z,1516727226.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:06.705Z,1516727226.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:07.116Z,1516727227.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:07.506Z,1516727227.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:07.899Z,1516727227.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:08.300Z,1516727228.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:08.700Z,1516727228.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:09.097Z,1516727229.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:09.550Z,1516727229.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:09.909Z,1516727229.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:10.308Z,1516727230.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:10.707Z,1516727230.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:11.098Z,1516727231.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:11.503Z,1516727231.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:11.908Z,1516727231.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:12.305Z,1516727232.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:12.706Z,1516727232.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:13.108Z,1516727233.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:13.506Z,1516727233.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:13.905Z,1516727233.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:14.311Z,1516727234.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:14.708Z,1516727234.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:15.093Z,1516727235.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:15.519Z,1516727235.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:15.925Z,1516727235.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:16.325Z,1516727236.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:16.696Z,1516727236.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:17.093Z,1516727237.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:17.497Z,1516727237.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:17.896Z,1516727237.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:18.292Z,1516727238.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:18.702Z,1516727238.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:19.129Z,1516727239.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:19.506Z,1516727239.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:19.896Z,1516727239.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:19.898Z,1516727239.898 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:19.898Z,1516727239.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 276 2018-01-23T17:07:19.898Z,1516727239.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:07:19.910Z,1516727239.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:07:20.295Z,1516727240.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:20.307Z,1516727240.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:07:20.307Z,1516727240.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 276 2018-01-23T17:07:20.697Z,1516727240.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:20.699Z,1516727240.699 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:07:20.699Z,1516727240.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:07:20.700Z,1516727240.700 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:07:21.103Z,1516727241.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:21.506Z,1516727241.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:21.909Z,1516727241.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:22.305Z,1516727242.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:22.696Z,1516727242.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:23.101Z,1516727243.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:23.504Z,1516727243.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:23.897Z,1516727243.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:24.296Z,1516727244.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:24.706Z,1516727244.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:25.112Z,1516727245.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:25.513Z,1516727245.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:25.901Z,1516727245.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:26.297Z,1516727246.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:26.698Z,1516727246.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:27.103Z,1516727247.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:27.510Z,1516727247.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:27.910Z,1516727247.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:28.313Z,1516727248.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:28.704Z,1516727248.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:29.099Z,1516727249.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:29.506Z,1516727249.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:29.900Z,1516727249.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:30.305Z,1516727250.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:30.305Z,1516727250.305 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 276 2018-01-23T17:07:30.305Z,1516727250.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:07:30.307Z,1516727250.307 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:30.307Z,1516727250.307 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 276 2018-01-23T17:07:30.307Z,1516727250.307 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:07:30.320Z,1516727250.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:07:30.320Z,1516727250.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:07:30.718Z,1516727250.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:07:30.718Z,1516727250.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 276 2018-01-23T17:07:30.718Z,1516727250.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:07:30.719Z,1516727250.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 276 2018-01-23T17:07:31.111Z,1516727251.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:07:31.112Z,1516727251.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:07:31.112Z,1516727251.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:07:31.113Z,1516727251.113 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:07:31.113Z,1516727251.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:07:31.113Z,1516727251.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:07:31.509Z,1516727251.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:07:31.519Z,1516727251.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:31.892Z,1516727251.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:07:31.893Z,1516727251.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:32.288Z,1516727252.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:07:32.289Z,1516727252.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:32.688Z,1516727252.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:07:32.689Z,1516727252.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:33.088Z,1516727253.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:07:33.089Z,1516727253.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:33.497Z,1516727253.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:07:33.498Z,1516727253.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:33.901Z,1516727253.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:07:33.902Z,1516727253.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:34.313Z,1516727254.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:07:34.314Z,1516727254.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:34.688Z,1516727254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:07:34.689Z,1516727254.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:35.088Z,1516727255.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:07:35.089Z,1516727255.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:35.488Z,1516727255.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:07:35.489Z,1516727255.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:35.893Z,1516727255.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:07:35.894Z,1516727255.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:36.293Z,1516727256.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:07:36.294Z,1516727256.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:36.732Z,1516727256.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:07:36.733Z,1516727256.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:37.112Z,1516727257.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:07:37.113Z,1516727257.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:37.509Z,1516727257.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:07:37.510Z,1516727257.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:37.908Z,1516727257.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:07:37.909Z,1516727257.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:38.315Z,1516727258.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:07:38.316Z,1516727258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:38.703Z,1516727258.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:07:38.704Z,1516727258.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:39.108Z,1516727259.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:07:39.109Z,1516727259.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:39.513Z,1516727259.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:07:39.514Z,1516727259.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:39.912Z,1516727259.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:07:39.913Z,1516727259.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:40.317Z,1516727260.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:07:40.318Z,1516727260.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:40.707Z,1516727260.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:07:40.708Z,1516727260.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:41.092Z,1516727261.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:07:41.093Z,1516727261.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:41.506Z,1516727261.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:07:41.509Z,1516727261.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:41.908Z,1516727261.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:07:41.909Z,1516727261.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:42.284Z,1516727262.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:07:42.285Z,1516727262.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:42.721Z,1516727262.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:07:42.722Z,1516727262.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:43.121Z,1516727263.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:07:43.122Z,1516727263.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:43.518Z,1516727263.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:07:43.523Z,1516727263.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:43.894Z,1516727263.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:07:43.895Z,1516727263.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:44.312Z,1516727264.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:07:44.313Z,1516727264.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:44.694Z,1516727264.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:07:44.695Z,1516727264.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:45.094Z,1516727265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:07:45.095Z,1516727265.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:45.500Z,1516727265.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:07:45.501Z,1516727265.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:45.925Z,1516727265.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:07:45.926Z,1516727265.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:46.301Z,1516727266.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:07:46.302Z,1516727266.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:46.695Z,1516727266.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:07:46.696Z,1516727266.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:47.093Z,1516727267.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:07:47.093Z,1516727267.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:47.495Z,1516727267.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:07:47.496Z,1516727267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:47.900Z,1516727267.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:07:47.901Z,1516727267.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:48.292Z,1516727268.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:07:48.293Z,1516727268.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:48.698Z,1516727268.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:07:48.699Z,1516727268.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:49.129Z,1516727269.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:07:49.130Z,1516727269.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:49.504Z,1516727269.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:07:49.505Z,1516727269.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:49.894Z,1516727269.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:07:49.895Z,1516727269.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:50.295Z,1516727270.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:07:50.296Z,1516727270.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:50.701Z,1516727270.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:51.098Z,1516727271.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:51.501Z,1516727271.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:51.902Z,1516727271.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:52.301Z,1516727272.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:52.696Z,1516727272.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:53.095Z,1516727273.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:53.495Z,1516727273.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:53.896Z,1516727273.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:54.294Z,1516727274.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:54.726Z,1516727274.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:55.106Z,1516727275.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:55.505Z,1516727275.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:55.901Z,1516727275.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:56.296Z,1516727276.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:56.705Z,1516727276.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:57.095Z,1516727277.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:57.508Z,1516727277.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:57.906Z,1516727277.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:58.305Z,1516727278.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:58.696Z,1516727278.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:59.094Z,1516727279.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:59.500Z,1516727279.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:07:59.897Z,1516727279.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:00.294Z,1516727280.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:00.710Z,1516727280.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:01.105Z,1516727281.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:04.206Z,1516727284.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:04.337Z,1516727284.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:04.696Z,1516727284.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:05.097Z,1516727285.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:05.505Z,1516727285.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:05.913Z,1516727285.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:06.312Z,1516727286.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:06.694Z,1516727286.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:07.093Z,1516727287.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:07.497Z,1516727287.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:07.896Z,1516727287.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:08.293Z,1516727288.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:08.702Z,1516727288.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:09.106Z,1516727289.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:09.509Z,1516727289.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:09.895Z,1516727289.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:10.295Z,1516727290.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:10.694Z,1516727290.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:11.101Z,1516727291.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:11.505Z,1516727291.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:11.909Z,1516727291.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:12.306Z,1516727292.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:12.701Z,1516727292.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:13.094Z,1516727293.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:13.504Z,1516727293.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:13.894Z,1516727293.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:14.304Z,1516727294.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:14.704Z,1516727294.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:15.105Z,1516727295.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:15.505Z,1516727295.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:15.894Z,1516727295.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:16.297Z,1516727296.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:16.695Z,1516727296.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:17.094Z,1516727297.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:17.509Z,1516727297.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:17.905Z,1516727297.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:18.305Z,1516727298.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:18.697Z,1516727298.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:19.105Z,1516727299.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:19.508Z,1516727299.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:19.898Z,1516727299.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:20.300Z,1516727300.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:20.706Z,1516727300.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:21.103Z,1516727301.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:21.516Z,1516727301.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:21.895Z,1516727301.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:22.299Z,1516727302.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:22.699Z,1516727302.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:23.102Z,1516727303.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:23.503Z,1516727303.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:23.910Z,1516727303.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:24.305Z,1516727304.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:24.699Z,1516727304.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:25.099Z,1516727305.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:25.501Z,1516727305.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:25.900Z,1516727305.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:26.303Z,1516727306.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:26.713Z,1516727306.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:27.111Z,1516727307.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:27.511Z,1516727307.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:27.905Z,1516727307.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:28.281Z,1516727308.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:28.707Z,1516727308.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:29.113Z,1516727309.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:29.504Z,1516727309.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:29.915Z,1516727309.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:30.313Z,1516727310.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:30.704Z,1516727310.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:31.109Z,1516727311.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:31.515Z,1516727311.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:31.921Z,1516727311.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:32.321Z,1516727312.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:32.687Z,1516727312.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:33.117Z,1516727313.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:33.492Z,1516727313.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:33.891Z,1516727313.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:34.288Z,1516727314.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:34.719Z,1516727314.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:35.101Z,1516727315.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:35.494Z,1516727315.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:35.890Z,1516727315.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:36.296Z,1516727316.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:36.696Z,1516727316.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:37.092Z,1516727317.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:37.494Z,1516727317.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:37.906Z,1516727317.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:38.298Z,1516727318.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:38.693Z,1516727318.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:39.092Z,1516727319.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:39.510Z,1516727319.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:39.906Z,1516727319.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:40.301Z,1516727320.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:40.694Z,1516727320.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:41.097Z,1516727321.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:41.503Z,1516727321.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:41.909Z,1516727321.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:42.308Z,1516727322.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:42.695Z,1516727322.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:43.103Z,1516727323.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:43.503Z,1516727323.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:43.905Z,1516727323.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:44.305Z,1516727324.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:44.696Z,1516727324.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:45.093Z,1516727325.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:45.501Z,1516727325.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:45.913Z,1516727325.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:46.305Z,1516727326.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:46.700Z,1516727326.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:47.096Z,1516727327.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:47.512Z,1516727327.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:47.906Z,1516727327.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:48.305Z,1516727328.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:48.693Z,1516727328.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:49.095Z,1516727329.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:49.505Z,1516727329.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:49.909Z,1516727329.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:50.302Z,1516727330.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:50.696Z,1516727330.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:51.099Z,1516727331.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:51.513Z,1516727331.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:51.913Z,1516727331.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:52.307Z,1516727332.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:52.709Z,1516727332.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:53.100Z,1516727333.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:53.508Z,1516727333.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:53.912Z,1516727333.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:54.315Z,1516727334.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:54.743Z,1516727334.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:55.106Z,1516727335.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:55.512Z,1516727335.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:55.910Z,1516727335.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:56.308Z,1516727336.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:56.706Z,1516727336.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:57.106Z,1516727337.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:57.491Z,1516727337.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x16157 got:0x25977 2018-01-23T17:08:57.515Z,1516727337.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:57.907Z,1516727337.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:58.310Z,1516727338.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:58.697Z,1516727338.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:59.079Z,1516727339.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x58617 got:0x16909 2018-01-23T17:08:59.106Z,1516727339.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:59.514Z,1516727339.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:08:59.914Z,1516727339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:00.305Z,1516727340.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:00.697Z,1516727340.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:01.103Z,1516727341.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:01.512Z,1516727341.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:04.605Z,1516727344.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:04.742Z,1516727344.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:05.104Z,1516727345.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:05.476Z,1516727345.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:05.871Z,1516727345.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:06.275Z,1516727346.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:06.704Z,1516727346.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:07.074Z,1516727347.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:07.500Z,1516727347.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:07.881Z,1516727347.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:08.292Z,1516727348.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:08.672Z,1516727348.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:09.075Z,1516727349.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:09.473Z,1516727349.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:09.874Z,1516727349.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:10.277Z,1516727350.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:10.686Z,1516727350.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:11.079Z,1516727351.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:11.472Z,1516727351.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:11.873Z,1516727351.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:12.270Z,1516727352.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:12.681Z,1516727352.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:13.078Z,1516727353.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:13.481Z,1516727353.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:13.872Z,1516727353.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:14.273Z,1516727354.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:14.673Z,1516727354.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:15.073Z,1516727355.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:15.470Z,1516727355.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:15.882Z,1516727355.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:16.276Z,1516727356.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:16.682Z,1516727356.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:17.073Z,1516727357.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:17.473Z,1516727357.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:17.874Z,1516727357.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:18.274Z,1516727358.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:18.682Z,1516727358.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:19.089Z,1516727359.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:19.482Z,1516727359.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:19.885Z,1516727359.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:20.273Z,1516727360.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:20.685Z,1516727360.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:21.073Z,1516727361.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:21.474Z,1516727361.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:21.886Z,1516727361.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:22.291Z,1516727362.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:22.684Z,1516727362.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:23.082Z,1516727363.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:23.483Z,1516727363.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:23.874Z,1516727363.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:24.273Z,1516727364.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:24.682Z,1516727364.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:25.085Z,1516727365.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:25.496Z,1516727365.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:25.876Z,1516727365.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:26.280Z,1516727366.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:26.679Z,1516727366.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:27.080Z,1516727367.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:27.469Z,1516727367.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:27.892Z,1516727367.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:28.290Z,1516727368.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:28.686Z,1516727368.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:29.075Z,1516727369.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:29.463Z,1516727369.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:29.865Z,1516727369.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:30.297Z,1516727370.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:30.699Z,1516727370.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:31.094Z,1516727371.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:31.501Z,1516727371.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:31.872Z,1516727371.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:32.273Z,1516727372.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:32.673Z,1516727372.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:33.077Z,1516727373.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:33.473Z,1516727373.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:33.889Z,1516727373.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:34.300Z,1516727374.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:34.687Z,1516727374.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:35.089Z,1516727375.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:35.491Z,1516727375.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:35.888Z,1516727375.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:36.292Z,1516727376.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:36.702Z,1516727376.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:37.089Z,1516727377.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:37.497Z,1516727377.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:37.897Z,1516727377.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:38.262Z,1516727378.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:38.695Z,1516727378.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:39.068Z,1516727379.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:39.473Z,1516727379.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:39.878Z,1516727379.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:40.284Z,1516727380.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:40.674Z,1516727380.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:41.070Z,1516727381.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:41.471Z,1516727381.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:41.870Z,1516727381.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:42.281Z,1516727382.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:42.682Z,1516727382.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:43.085Z,1516727383.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:43.481Z,1516727383.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:43.872Z,1516727383.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:44.271Z,1516727384.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:44.684Z,1516727384.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:45.073Z,1516727385.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:45.471Z,1516727385.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:45.889Z,1516727385.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:46.285Z,1516727386.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:46.704Z,1516727386.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:47.081Z,1516727387.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:47.477Z,1516727387.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:47.874Z,1516727387.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:48.281Z,1516727388.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:48.688Z,1516727388.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:49.081Z,1516727389.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:49.482Z,1516727389.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:49.875Z,1516727389.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:50.279Z,1516727390.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:50.679Z,1516727390.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:51.085Z,1516727391.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:51.473Z,1516727391.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:51.882Z,1516727391.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:52.292Z,1516727392.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:52.684Z,1516727392.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:53.080Z,1516727393.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:53.480Z,1516727393.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:53.878Z,1516727393.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:54.280Z,1516727394.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:54.690Z,1516727394.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:55.089Z,1516727395.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:55.482Z,1516727395.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:55.888Z,1516727395.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:56.262Z,1516727396.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:56.664Z,1516727396.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:57.065Z,1516727397.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:57.469Z,1516727397.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:57.898Z,1516727397.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:58.302Z,1516727398.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:58.674Z,1516727398.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:59.071Z,1516727399.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:59.473Z,1516727399.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:09:59.872Z,1516727399.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:00.277Z,1516727400.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:00.678Z,1516727400.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:01.078Z,1516727401.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:01.481Z,1516727401.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:01.889Z,1516727401.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:04.966Z,1516727404.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:05.120Z,1516727405.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:05.446Z,1516727405.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:05.846Z,1516727405.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:06.241Z,1516727406.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:06.640Z,1516727406.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:07.042Z,1516727407.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:07.433Z,1516727407.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:07.846Z,1516727407.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:08.248Z,1516727408.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:08.647Z,1516727408.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:09.041Z,1516727409.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:09.444Z,1516727409.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:09.840Z,1516727409.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:10.241Z,1516727410.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:10.648Z,1516727410.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:11.051Z,1516727411.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:11.445Z,1516727411.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:11.841Z,1516727411.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:12.245Z,1516727412.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:12.649Z,1516727412.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:13.047Z,1516727413.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:13.452Z,1516727413.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:13.843Z,1516727413.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:14.245Z,1516727414.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:14.652Z,1516727414.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:15.049Z,1516727415.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:15.445Z,1516727415.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:15.843Z,1516727415.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:16.243Z,1516727416.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:16.652Z,1516727416.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:17.056Z,1516727417.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:17.445Z,1516727417.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:17.853Z,1516727417.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:18.221Z,1516727418.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:18.650Z,1516727418.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:19.056Z,1516727419.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:19.454Z,1516727419.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:19.832Z,1516727419.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:20.232Z,1516727420.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:20.654Z,1516727420.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:21.062Z,1516727421.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:21.065Z,1516727421.065 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:21.065Z,1516727421.065 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 277 2018-01-23T17:10:21.065Z,1516727421.065 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:10:21.077Z,1516727421.077 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:10:21.438Z,1516727421.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:21.478Z,1516727421.478 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:10:21.478Z,1516727421.478 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 277 2018-01-23T17:10:21.830Z,1516727421.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:21.832Z,1516727421.832 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:10:21.832Z,1516727421.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:10:21.833Z,1516727421.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:10:22.240Z,1516727422.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:22.646Z,1516727422.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:23.034Z,1516727423.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:23.434Z,1516727423.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:23.831Z,1516727423.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:24.229Z,1516727424.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:24.634Z,1516727424.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:25.037Z,1516727425.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:25.434Z,1516727425.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:25.830Z,1516727425.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:26.230Z,1516727426.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:26.634Z,1516727426.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:27.038Z,1516727427.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:27.445Z,1516727427.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:27.841Z,1516727427.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:28.233Z,1516727428.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:28.634Z,1516727428.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:29.046Z,1516727429.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:29.441Z,1516727429.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:29.849Z,1516727429.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:30.232Z,1516727430.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:30.637Z,1516727430.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:31.038Z,1516727431.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:31.445Z,1516727431.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:31.445Z,1516727431.445 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 277 2018-01-23T17:10:31.445Z,1516727431.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:10:31.447Z,1516727431.447 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:31.447Z,1516727431.447 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 277 2018-01-23T17:10:31.447Z,1516727431.447 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:10:31.480Z,1516727431.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:10:31.480Z,1516727431.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:10:31.854Z,1516727431.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:10:31.854Z,1516727431.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 277 2018-01-23T17:10:31.863Z,1516727431.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:10:31.863Z,1516727431.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 277 2018-01-23T17:10:32.240Z,1516727432.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:10:32.240Z,1516727432.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:10:32.241Z,1516727432.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:10:32.241Z,1516727432.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:10:32.241Z,1516727432.241 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:10:32.242Z,1516727432.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:10:32.643Z,1516727432.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:10:32.644Z,1516727432.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:33.055Z,1516727433.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:10:33.056Z,1516727433.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:33.448Z,1516727433.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:10:33.449Z,1516727433.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:33.840Z,1516727433.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:10:33.841Z,1516727433.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:34.244Z,1516727434.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:10:34.245Z,1516727434.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:34.656Z,1516727434.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:10:34.657Z,1516727434.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:35.047Z,1516727435.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:10:35.048Z,1516727435.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:35.452Z,1516727435.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:10:35.453Z,1516727435.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:35.836Z,1516727435.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:10:35.837Z,1516727435.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:36.244Z,1516727436.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:10:36.245Z,1516727436.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:36.650Z,1516727436.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:10:36.655Z,1516727436.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:37.052Z,1516727437.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:10:37.053Z,1516727437.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:37.454Z,1516727437.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:10:37.459Z,1516727437.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:37.835Z,1516727437.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:10:37.836Z,1516727437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:38.229Z,1516727438.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:10:38.230Z,1516727438.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:38.634Z,1516727438.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:10:38.635Z,1516727438.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:39.037Z,1516727439.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:10:39.038Z,1516727439.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:39.434Z,1516727439.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:10:39.435Z,1516727439.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:39.832Z,1516727439.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:10:39.832Z,1516727439.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:40.233Z,1516727440.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:10:40.234Z,1516727440.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:40.642Z,1516727440.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:10:40.643Z,1516727440.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:41.044Z,1516727441.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:10:41.045Z,1516727441.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:41.448Z,1516727441.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:10:41.449Z,1516727441.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:41.840Z,1516727441.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:10:41.841Z,1516727441.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:42.237Z,1516727442.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:10:42.238Z,1516727442.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:42.637Z,1516727442.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:10:42.638Z,1516727442.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:43.048Z,1516727443.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:10:43.049Z,1516727443.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:43.445Z,1516727443.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:10:43.446Z,1516727443.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:43.842Z,1516727443.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:10:43.843Z,1516727443.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:44.246Z,1516727444.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:10:44.247Z,1516727444.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:44.634Z,1516727444.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:10:44.635Z,1516727444.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:45.035Z,1516727445.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:10:45.036Z,1516727445.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:45.440Z,1516727445.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:10:45.441Z,1516727445.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:45.844Z,1516727445.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:10:45.845Z,1516727445.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:46.254Z,1516727446.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:10:46.255Z,1516727446.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:46.649Z,1516727446.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:10:46.650Z,1516727446.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:47.034Z,1516727447.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:10:47.035Z,1516727447.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:47.444Z,1516727447.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:10:47.445Z,1516727447.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:47.847Z,1516727447.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:10:47.848Z,1516727447.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:48.244Z,1516727448.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:10:48.245Z,1516727448.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:48.640Z,1516727448.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:10:48.641Z,1516727448.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:49.055Z,1516727449.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:10:49.056Z,1516727449.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:49.453Z,1516727449.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:10:49.454Z,1516727449.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:49.854Z,1516727449.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:10:49.856Z,1516727449.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:50.252Z,1516727450.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:10:50.253Z,1516727450.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:50.657Z,1516727450.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:10:50.658Z,1516727450.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:51.032Z,1516727451.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:10:51.033Z,1516727451.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:51.432Z,1516727451.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:10:51.433Z,1516727451.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:51.841Z,1516727451.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:52.242Z,1516727452.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:52.637Z,1516727452.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:53.037Z,1516727453.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:53.431Z,1516727453.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:53.836Z,1516727453.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:54.233Z,1516727454.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:54.631Z,1516727454.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:55.044Z,1516727455.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:55.438Z,1516727455.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:55.841Z,1516727455.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:56.235Z,1516727456.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:56.631Z,1516727456.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:57.040Z,1516727457.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:57.432Z,1516727457.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:57.843Z,1516727457.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:58.245Z,1516727458.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:58.641Z,1516727458.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:59.041Z,1516727459.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:59.430Z,1516727459.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:10:59.832Z,1516727459.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:00.233Z,1516727460.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:00.630Z,1516727460.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:01.048Z,1516727461.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:01.442Z,1516727461.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:01.840Z,1516727461.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:02.231Z,1516727462.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:05.344Z,1516727465.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:05.489Z,1516727465.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:05.854Z,1516727465.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:06.254Z,1516727466.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:06.646Z,1516727466.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:07.039Z,1516727467.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:07.444Z,1516727467.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:07.839Z,1516727467.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:08.239Z,1516727468.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:08.644Z,1516727468.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:09.049Z,1516727469.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:09.444Z,1516727469.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:09.845Z,1516727469.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:10.245Z,1516727470.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:10.649Z,1516727470.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:11.044Z,1516727471.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:11.440Z,1516727471.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:11.850Z,1516727471.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:12.257Z,1516727472.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:12.649Z,1516727472.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:13.039Z,1516727473.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:13.441Z,1516727473.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:13.839Z,1516727473.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:14.245Z,1516727474.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:14.645Z,1516727474.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:15.050Z,1516727475.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:15.448Z,1516727475.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:15.849Z,1516727475.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:16.245Z,1516727476.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:16.645Z,1516727476.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:17.045Z,1516727477.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:17.527Z,1516727477.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:17.849Z,1516727477.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:18.250Z,1516727478.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:18.657Z,1516727478.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:19.042Z,1516727479.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:19.448Z,1516727479.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:19.847Z,1516727479.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:20.251Z,1516727480.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:20.653Z,1516727480.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:21.054Z,1516727481.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:21.455Z,1516727481.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:21.861Z,1516727481.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:22.251Z,1516727482.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:22.653Z,1516727482.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:23.048Z,1516727483.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:23.453Z,1516727483.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:23.863Z,1516727483.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:24.269Z,1516727484.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:24.654Z,1516727484.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:25.039Z,1516727485.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:25.437Z,1516727485.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:25.837Z,1516727485.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:26.237Z,1516727486.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:26.633Z,1516727486.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:27.063Z,1516727487.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:27.469Z,1516727487.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:27.867Z,1516727487.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:28.236Z,1516727488.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:28.636Z,1516727488.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:29.037Z,1516727489.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:29.440Z,1516727489.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:29.846Z,1516727489.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:30.242Z,1516727490.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:30.667Z,1516727490.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:31.039Z,1516727491.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:31.437Z,1516727491.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:31.848Z,1516727491.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:32.238Z,1516727492.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:32.639Z,1516727492.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:33.042Z,1516727493.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:33.445Z,1516727493.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:33.842Z,1516727493.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:34.240Z,1516727494.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:34.638Z,1516727494.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:35.041Z,1516727495.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:35.440Z,1516727495.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:35.842Z,1516727495.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:36.242Z,1516727496.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:36.642Z,1516727496.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:37.037Z,1516727497.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:37.437Z,1516727497.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:37.840Z,1516727497.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:38.244Z,1516727498.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:38.637Z,1516727498.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:39.046Z,1516727499.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:39.445Z,1516727499.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:39.846Z,1516727499.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:40.245Z,1516727500.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:40.644Z,1516727500.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:41.044Z,1516727501.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:41.439Z,1516727501.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:41.848Z,1516727501.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:42.246Z,1516727502.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:42.649Z,1516727502.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:43.044Z,1516727503.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:43.437Z,1516727503.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:43.839Z,1516727503.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:44.239Z,1516727504.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:44.637Z,1516727504.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:45.050Z,1516727505.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:45.452Z,1516727505.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:45.856Z,1516727505.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:46.249Z,1516727506.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:46.640Z,1516727506.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:47.042Z,1516727507.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:47.447Z,1516727507.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:47.850Z,1516727507.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:48.251Z,1516727508.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:48.650Z,1516727508.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:49.044Z,1516727509.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:49.440Z,1516727509.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:49.838Z,1516727509.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:50.245Z,1516727510.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:50.662Z,1516727510.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:51.054Z,1516727511.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:51.453Z,1516727511.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:51.854Z,1516727511.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:52.269Z,1516727512.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:52.650Z,1516727512.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:53.046Z,1516727513.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:53.447Z,1516727513.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:53.857Z,1516727513.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:54.250Z,1516727514.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:54.657Z,1516727514.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:55.043Z,1516727515.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:55.437Z,1516727515.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:55.847Z,1516727515.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:56.248Z,1516727516.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:56.637Z,1516727516.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:57.057Z,1516727517.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:57.454Z,1516727517.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:57.860Z,1516727517.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:58.251Z,1516727518.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:58.652Z,1516727518.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:59.052Z,1516727519.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:59.451Z,1516727519.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:11:59.860Z,1516727519.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:00.261Z,1516727520.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:00.660Z,1516727520.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:01.052Z,1516727521.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:01.055Z,1516727521.055 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:12:01.055Z,1516727521.055 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:12:01.055Z,1516727521.055 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:12:01.055Z,1516727521.055 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:12:01.429Z,1516727521.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:01.440Z,1516727521.440 [Default:CheckIn:D] Stopped 2018-01-23T17:12:01.440Z,1516727521.440 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:12:01.853Z,1516727521.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:01.856Z,1516727521.856 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 834.156315 min 2018-01-23T17:12:01.856Z,1516727521.856 [Default:CheckIn:E] Stopped 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn] Stopped 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn](INFO): Running loop #82 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn] Running Loop=82 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:12:01.857Z,1516727521.857 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:12:02.255Z,1516727522.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:05.328Z,1516727525.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:05.473Z,1516727525.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:05.841Z,1516727525.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:06.226Z,1516727526.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:06.625Z,1516727526.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:07.020Z,1516727527.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:07.399Z,1516727527.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:07.825Z,1516727527.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:08.229Z,1516727528.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:08.632Z,1516727528.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:09.005Z,1516727529.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:09.431Z,1516727529.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:09.778Z,1516727529.778 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T17:12:09.778Z,1516727529.778 [NAL9602] Data Fault, FailCount= 1 2018-01-23T17:12:09.778Z,1516727529.778 [NAL9602](ERROR): Data Fault 2018-01-23T17:12:09.809Z,1516727529.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:09.851Z,1516727529.851 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T17:12:10.177Z,1516727530.177 [NAL9602](INFO): Powering down 2018-01-23T17:12:10.212Z,1516727530.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:10.607Z,1516727530.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:11.006Z,1516727531.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:11.036Z,1516727531.036 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:12:11.036Z,1516727531.036 [NAL9602] No Fault, FailCount= 1 2018-01-23T17:12:11.414Z,1516727531.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:11.808Z,1516727531.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:12.204Z,1516727532.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:12.617Z,1516727532.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:13.014Z,1516727533.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:13.409Z,1516727533.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:13.813Z,1516727533.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:14.214Z,1516727534.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:14.607Z,1516727534.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:15.015Z,1516727535.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:15.411Z,1516727535.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:15.814Z,1516727535.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:16.216Z,1516727536.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:16.614Z,1516727536.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:17.014Z,1516727537.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:17.420Z,1516727537.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:17.810Z,1516727537.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:18.207Z,1516727538.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:18.614Z,1516727538.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:19.011Z,1516727539.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:19.407Z,1516727539.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:19.809Z,1516727539.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:20.215Z,1516727540.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:20.608Z,1516727540.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:21.018Z,1516727541.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:21.412Z,1516727541.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:21.816Z,1516727541.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:22.217Z,1516727542.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:22.613Z,1516727542.613 [PNI_TCM](ERROR): CRC does not match. Expected:0x52461 got:0x7618 2018-01-23T17:12:22.649Z,1516727542.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:23.015Z,1516727543.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:23.419Z,1516727543.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:23.811Z,1516727543.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:24.212Z,1516727544.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:24.624Z,1516727544.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:25.025Z,1516727545.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:25.424Z,1516727545.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:25.824Z,1516727545.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:26.202Z,1516727546.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:26.601Z,1516727546.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:27.024Z,1516727547.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:27.402Z,1516727547.402 [PNI_TCM](ERROR): CRC does not match. Expected:0x1108 got:0x61721 2018-01-23T17:12:27.437Z,1516727547.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:27.809Z,1516727547.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:28.207Z,1516727548.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:28.636Z,1516727548.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:29.010Z,1516727549.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:29.416Z,1516727549.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:29.810Z,1516727549.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:30.230Z,1516727550.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:30.617Z,1516727550.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:31.011Z,1516727551.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:31.417Z,1516727551.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:31.818Z,1516727551.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:32.205Z,1516727552.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:32.610Z,1516727552.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:33.010Z,1516727553.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:33.429Z,1516727553.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:33.815Z,1516727553.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:34.216Z,1516727554.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:34.616Z,1516727554.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:35.025Z,1516727555.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:35.415Z,1516727555.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:35.819Z,1516727555.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:36.211Z,1516727556.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:36.626Z,1516727556.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:37.016Z,1516727557.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:37.415Z,1516727557.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:37.817Z,1516727557.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:38.227Z,1516727558.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:38.617Z,1516727558.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:39.013Z,1516727559.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:39.410Z,1516727559.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:39.813Z,1516727559.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:40.221Z,1516727560.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:40.568Z,1516727560.568 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:12:40.623Z,1516727560.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:41.023Z,1516727561.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:41.431Z,1516727561.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:41.806Z,1516727561.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:42.210Z,1516727562.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:42.616Z,1516727562.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:43.008Z,1516727563.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:43.406Z,1516727563.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:43.809Z,1516727563.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:44.209Z,1516727564.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:44.606Z,1516727564.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:45.015Z,1516727565.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:45.403Z,1516727565.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:45.810Z,1516727565.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:46.215Z,1516727566.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:46.603Z,1516727566.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:47.006Z,1516727567.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:47.422Z,1516727567.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:47.808Z,1516727567.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:48.206Z,1516727568.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:48.606Z,1516727568.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:49.010Z,1516727569.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:49.406Z,1516727569.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:49.814Z,1516727569.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:50.213Z,1516727570.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:50.610Z,1516727570.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:51.012Z,1516727571.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:51.418Z,1516727571.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:51.768Z,1516727571.768 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:12:51.813Z,1516727571.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:52.216Z,1516727572.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:52.623Z,1516727572.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:53.065Z,1516727573.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:53.440Z,1516727573.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:53.817Z,1516727573.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:54.209Z,1516727574.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:54.617Z,1516727574.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:55.017Z,1516727575.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:55.422Z,1516727575.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:55.828Z,1516727575.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:56.227Z,1516727576.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:56.613Z,1516727576.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:57.022Z,1516727577.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:57.421Z,1516727577.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:57.814Z,1516727577.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:58.219Z,1516727578.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:58.630Z,1516727578.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:59.025Z,1516727579.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:59.428Z,1516727579.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:12:59.825Z,1516727579.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:00.222Z,1516727580.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:00.632Z,1516727580.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:01.005Z,1516727581.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:01.440Z,1516727581.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:01.840Z,1516727581.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:02.231Z,1516727582.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:02.613Z,1516727582.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:05.738Z,1516727585.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:05.865Z,1516727585.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:06.206Z,1516727586.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:06.618Z,1516727586.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:07.013Z,1516727587.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:07.403Z,1516727587.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:07.805Z,1516727587.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:08.202Z,1516727588.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:08.617Z,1516727588.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:09.014Z,1516727589.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:09.421Z,1516727589.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:09.806Z,1516727589.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:10.213Z,1516727590.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:10.606Z,1516727590.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:11.012Z,1516727591.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:11.415Z,1516727591.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:11.824Z,1516727591.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:12.217Z,1516727592.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:12.609Z,1516727592.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:13.006Z,1516727593.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:13.406Z,1516727593.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:13.805Z,1516727593.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:14.213Z,1516727594.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:14.625Z,1516727594.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:15.022Z,1516727595.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:15.414Z,1516727595.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:15.813Z,1516727595.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:16.214Z,1516727596.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:16.609Z,1516727596.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:17.012Z,1516727597.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:17.420Z,1516727597.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:17.822Z,1516727597.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:18.224Z,1516727598.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:18.613Z,1516727598.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:19.014Z,1516727599.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:19.413Z,1516727599.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:19.819Z,1516727599.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:20.202Z,1516727600.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:20.628Z,1516727600.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:21.020Z,1516727601.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:21.425Z,1516727601.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:21.813Z,1516727601.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:22.226Z,1516727602.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:22.229Z,1516727602.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:22.229Z,1516727602.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 278 2018-01-23T17:13:22.229Z,1516727602.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:13:22.241Z,1516727602.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:13:22.596Z,1516727602.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:22.636Z,1516727602.636 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:13:22.636Z,1516727602.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 278 2018-01-23T17:13:23.001Z,1516727603.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:23.002Z,1516727603.002 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:13:23.002Z,1516727603.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:13:23.019Z,1516727603.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:13:23.429Z,1516727603.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:23.833Z,1516727603.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:24.229Z,1516727604.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:24.632Z,1516727604.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:25.025Z,1516727605.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:25.405Z,1516727605.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:25.804Z,1516727605.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:26.205Z,1516727606.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:26.634Z,1516727606.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:27.034Z,1516727607.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:27.414Z,1516727607.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:27.805Z,1516727607.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:28.204Z,1516727608.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:28.603Z,1516727608.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:29.002Z,1516727609.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:29.406Z,1516727609.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:29.818Z,1516727609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:30.210Z,1516727610.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:30.604Z,1516727610.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:31.004Z,1516727611.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:31.404Z,1516727611.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:31.805Z,1516727611.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:32.203Z,1516727612.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:32.609Z,1516727612.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:32.609Z,1516727612.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 278 2018-01-23T17:13:32.609Z,1516727612.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:13:32.611Z,1516727612.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:32.611Z,1516727612.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 278 2018-01-23T17:13:32.611Z,1516727612.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:13:32.636Z,1516727612.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:13:32.636Z,1516727612.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:13:33.055Z,1516727613.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:13:33.055Z,1516727613.055 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 278 2018-01-23T17:13:33.056Z,1516727613.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:13:33.056Z,1516727613.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 278 2018-01-23T17:13:33.412Z,1516727613.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:13:33.412Z,1516727613.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:13:33.413Z,1516727613.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:13:33.413Z,1516727613.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:13:33.414Z,1516727613.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:13:33.414Z,1516727613.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:13:33.811Z,1516727613.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:13:33.812Z,1516727613.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:34.214Z,1516727614.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:13:34.215Z,1516727614.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:34.608Z,1516727614.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:13:34.609Z,1516727614.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:35.011Z,1516727615.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:13:35.012Z,1516727615.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:35.414Z,1516727615.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:13:35.415Z,1516727615.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:35.817Z,1516727615.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:13:35.818Z,1516727615.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:36.218Z,1516727616.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:13:36.223Z,1516727616.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:36.607Z,1516727616.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:13:36.608Z,1516727616.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:37.012Z,1516727617.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:13:37.013Z,1516727617.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:37.412Z,1516727617.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:13:37.413Z,1516727617.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:37.808Z,1516727617.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:13:37.809Z,1516727617.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:38.212Z,1516727618.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:13:38.213Z,1516727618.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:38.614Z,1516727618.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:13:38.615Z,1516727618.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:39.023Z,1516727619.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:13:39.024Z,1516727619.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:39.417Z,1516727619.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:13:39.418Z,1516727619.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:39.813Z,1516727619.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:13:39.814Z,1516727619.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:40.213Z,1516727620.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:13:40.214Z,1516727620.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:40.613Z,1516727620.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:13:40.614Z,1516727620.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:41.016Z,1516727621.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:13:41.017Z,1516727621.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:41.428Z,1516727621.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:13:41.429Z,1516727621.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:41.821Z,1516727621.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:13:41.822Z,1516727621.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:42.225Z,1516727622.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:13:42.226Z,1516727622.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:42.612Z,1516727622.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:13:42.613Z,1516727622.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:43.021Z,1516727623.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:13:43.022Z,1516727623.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:43.421Z,1516727623.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:13:43.422Z,1516727623.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:43.828Z,1516727623.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:13:43.829Z,1516727623.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:44.204Z,1516727624.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:13:44.205Z,1516727624.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:44.613Z,1516727624.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:13:44.614Z,1516727624.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:45.010Z,1516727625.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:13:45.011Z,1516727625.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:45.406Z,1516727625.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:13:45.407Z,1516727625.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:45.802Z,1516727625.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:13:45.803Z,1516727625.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:46.206Z,1516727626.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:13:46.212Z,1516727626.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:46.605Z,1516727626.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:13:46.606Z,1516727626.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:47.005Z,1516727627.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:13:47.006Z,1516727627.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:47.414Z,1516727627.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:13:47.415Z,1516727627.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:47.817Z,1516727627.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:13:47.818Z,1516727627.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:48.213Z,1516727628.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:13:48.214Z,1516727628.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:48.609Z,1516727628.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:13:48.610Z,1516727628.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:49.005Z,1516727629.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:13:49.005Z,1516727629.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:49.413Z,1516727629.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:13:49.414Z,1516727629.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:49.809Z,1516727629.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:13:49.810Z,1516727629.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:50.211Z,1516727630.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:13:50.212Z,1516727630.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:50.613Z,1516727630.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:13:50.614Z,1516727630.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:51.023Z,1516727631.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:13:51.024Z,1516727631.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:51.420Z,1516727631.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:13:51.421Z,1516727631.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:51.813Z,1516727631.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:13:51.814Z,1516727631.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:52.213Z,1516727632.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:13:52.213Z,1516727632.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:52.605Z,1516727632.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:13:52.607Z,1516727632.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:53.013Z,1516727633.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:53.416Z,1516727633.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:53.822Z,1516727633.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:54.220Z,1516727634.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:54.612Z,1516727634.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:55.016Z,1516727635.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:55.414Z,1516727635.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:55.809Z,1516727635.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:56.216Z,1516727636.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:56.613Z,1516727636.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:57.011Z,1516727637.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:57.410Z,1516727637.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:57.810Z,1516727637.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:58.206Z,1516727638.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:58.608Z,1516727638.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:59.009Z,1516727639.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:59.416Z,1516727639.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:13:59.814Z,1516727639.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:00.214Z,1516727640.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:00.605Z,1516727640.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:01.011Z,1516727641.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:01.408Z,1516727641.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:01.809Z,1516727641.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:02.209Z,1516727642.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:02.618Z,1516727642.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:03.021Z,1516727643.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:06.108Z,1516727646.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:06.253Z,1516727646.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:06.585Z,1516727646.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:06.981Z,1516727646.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:07.382Z,1516727647.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:07.794Z,1516727647.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:08.185Z,1516727648.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:08.581Z,1516727648.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:08.978Z,1516727648.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:09.390Z,1516727649.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:09.797Z,1516727649.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:10.189Z,1516727650.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:10.581Z,1516727650.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:10.976Z,1516727650.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:11.387Z,1516727651.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:11.790Z,1516727651.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:12.189Z,1516727652.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:12.582Z,1516727652.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:12.981Z,1516727652.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:13.388Z,1516727653.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:13.794Z,1516727653.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:14.192Z,1516727654.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:14.588Z,1516727654.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:14.988Z,1516727654.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:15.396Z,1516727655.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:15.794Z,1516727655.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:16.193Z,1516727656.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:16.590Z,1516727656.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:16.989Z,1516727656.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:17.396Z,1516727657.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:17.800Z,1516727657.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:18.193Z,1516727658.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:18.569Z,1516727658.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:18.997Z,1516727658.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:19.401Z,1516727659.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:19.806Z,1516727659.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:20.183Z,1516727660.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:20.575Z,1516727660.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:20.981Z,1516727660.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:21.388Z,1516727661.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:21.787Z,1516727661.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:22.182Z,1516727662.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:22.581Z,1516727662.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:22.967Z,1516727662.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:23.396Z,1516727663.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:23.798Z,1516727663.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:24.194Z,1516727664.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:24.597Z,1516727664.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:24.996Z,1516727664.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:25.382Z,1516727665.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:25.786Z,1516727665.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:26.179Z,1516727666.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:26.585Z,1516727666.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:26.981Z,1516727666.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:27.389Z,1516727667.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:27.786Z,1516727667.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:28.197Z,1516727668.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:28.589Z,1516727668.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:28.982Z,1516727668.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:29.379Z,1516727669.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:29.793Z,1516727669.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:30.201Z,1516727670.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:30.591Z,1516727670.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:30.985Z,1516727670.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:31.383Z,1516727671.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:31.789Z,1516727671.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:32.190Z,1516727672.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:32.589Z,1516727672.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:33.004Z,1516727673.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:33.392Z,1516727673.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:33.778Z,1516727673.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:34.184Z,1516727674.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:34.198Z,1516727674.198 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:14:34.608Z,1516727674.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:34.983Z,1516727674.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:35.385Z,1516727675.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:35.798Z,1516727675.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:36.193Z,1516727676.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:36.596Z,1516727676.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:36.990Z,1516727676.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:37.388Z,1516727677.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:37.785Z,1516727677.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:38.168Z,1516727678.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:38.600Z,1516727678.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:39.001Z,1516727679.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:39.400Z,1516727679.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:39.767Z,1516727679.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:40.200Z,1516727680.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:40.572Z,1516727680.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:40.973Z,1516727680.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:41.377Z,1516727681.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:41.798Z,1516727681.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:42.186Z,1516727682.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:42.590Z,1516727682.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:42.980Z,1516727682.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:43.377Z,1516727683.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:43.778Z,1516727683.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:44.177Z,1516727684.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:44.582Z,1516727684.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:44.982Z,1516727684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:45.382Z,1516727685.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:45.776Z,1516727685.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:46.176Z,1516727686.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:46.577Z,1516727686.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:46.989Z,1516727686.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:47.381Z,1516727687.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:47.787Z,1516727687.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:48.185Z,1516727688.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:48.585Z,1516727688.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:48.981Z,1516727688.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:49.376Z,1516727689.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:49.784Z,1516727689.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:50.181Z,1516727690.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:50.587Z,1516727690.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:50.997Z,1516727690.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:51.390Z,1516727691.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:51.776Z,1516727691.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:52.178Z,1516727692.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:52.584Z,1516727692.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:52.981Z,1516727692.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:53.377Z,1516727693.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:53.787Z,1516727693.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:54.190Z,1516727694.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:54.593Z,1516727694.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:54.981Z,1516727694.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:55.383Z,1516727695.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:55.788Z,1516727695.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:56.185Z,1516727696.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:56.590Z,1516727696.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:56.993Z,1516727696.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:57.402Z,1516727697.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:57.783Z,1516727697.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:58.184Z,1516727698.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:58.597Z,1516727698.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:58.984Z,1516727698.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:59.378Z,1516727699.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:14:59.792Z,1516727699.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:00.197Z,1516727700.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:00.591Z,1516727700.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:00.990Z,1516727700.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:01.377Z,1516727701.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:01.784Z,1516727701.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:02.181Z,1516727702.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:02.591Z,1516727702.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:02.994Z,1516727702.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:03.390Z,1516727703.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:06.481Z,1516727706.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:06.613Z,1516727706.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:06.958Z,1516727706.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:07.360Z,1516727707.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:07.765Z,1516727707.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:08.153Z,1516727708.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:08.548Z,1516727708.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:08.950Z,1516727708.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:09.350Z,1516727709.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:09.759Z,1516727709.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:10.161Z,1516727710.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:10.565Z,1516727710.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:10.949Z,1516727710.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:11.353Z,1516727711.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:11.750Z,1516727711.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:12.153Z,1516727712.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:12.562Z,1516727712.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:12.961Z,1516727712.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:13.364Z,1516727713.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:13.753Z,1516727713.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:14.161Z,1516727714.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:14.549Z,1516727714.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:14.952Z,1516727714.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:15.353Z,1516727715.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:15.760Z,1516727715.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:16.169Z,1516727716.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:16.565Z,1516727716.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:16.948Z,1516727716.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:17.353Z,1516727717.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:17.750Z,1516727717.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:18.153Z,1516727718.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:18.561Z,1516727718.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:18.969Z,1516727718.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:19.376Z,1516727719.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:19.749Z,1516727719.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:20.156Z,1516727720.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:20.552Z,1516727720.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:20.949Z,1516727720.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:21.356Z,1516727721.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:21.762Z,1516727721.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:22.173Z,1516727722.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:22.562Z,1516727722.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:22.962Z,1516727722.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:23.363Z,1516727723.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:23.740Z,1516727723.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:24.144Z,1516727724.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:24.565Z,1516727724.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:24.969Z,1516727724.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:25.372Z,1516727725.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:25.743Z,1516727725.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:26.169Z,1516727726.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:26.544Z,1516727726.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:26.949Z,1516727726.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:27.348Z,1516727727.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:27.754Z,1516727727.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:28.154Z,1516727728.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:28.577Z,1516727728.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:28.947Z,1516727728.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:29.353Z,1516727729.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:29.750Z,1516727729.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:30.148Z,1516727730.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:30.551Z,1516727730.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:30.954Z,1516727730.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:31.350Z,1516727731.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:31.749Z,1516727731.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:32.153Z,1516727732.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:32.548Z,1516727732.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:32.950Z,1516727732.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:33.349Z,1516727733.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:33.751Z,1516727733.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:34.155Z,1516727734.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:34.580Z,1516727734.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:34.969Z,1516727734.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:35.350Z,1516727735.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:35.750Z,1516727735.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:36.164Z,1516727736.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:36.558Z,1516727736.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:36.973Z,1516727736.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:37.364Z,1516727737.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:37.765Z,1516727737.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:38.153Z,1516727738.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:38.553Z,1516727738.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:38.954Z,1516727738.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:39.365Z,1516727739.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:39.772Z,1516727739.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:40.173Z,1516727740.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:40.565Z,1516727740.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:40.958Z,1516727740.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:41.350Z,1516727741.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:41.753Z,1516727741.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:42.163Z,1516727742.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:42.563Z,1516727742.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:42.974Z,1516727742.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:43.365Z,1516727743.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:43.761Z,1516727743.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:44.160Z,1516727744.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:44.584Z,1516727744.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:44.974Z,1516727744.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:45.377Z,1516727745.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:45.749Z,1516727745.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:46.154Z,1516727746.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:46.549Z,1516727746.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:46.945Z,1516727746.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:47.354Z,1516727747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:47.787Z,1516727747.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:48.158Z,1516727748.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:48.565Z,1516727748.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:48.953Z,1516727748.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:49.353Z,1516727749.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:49.754Z,1516727749.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:50.153Z,1516727750.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:50.564Z,1516727750.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:50.963Z,1516727750.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:51.361Z,1516727751.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:51.750Z,1516727751.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:52.152Z,1516727752.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:52.562Z,1516727752.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:52.962Z,1516727752.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:53.371Z,1516727753.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:53.756Z,1516727753.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:54.152Z,1516727754.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:54.562Z,1516727754.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:54.973Z,1516727754.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:55.375Z,1516727755.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:55.755Z,1516727755.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:56.165Z,1516727756.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:56.571Z,1516727756.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:56.964Z,1516727756.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:57.365Z,1516727757.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:57.754Z,1516727757.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:58.156Z,1516727758.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:58.563Z,1516727758.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:58.963Z,1516727758.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:59.369Z,1516727759.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:15:59.757Z,1516727759.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:00.160Z,1516727760.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:00.562Z,1516727760.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:00.962Z,1516727760.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:01.363Z,1516727761.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:01.754Z,1516727761.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:02.134Z,1516727762.134 [PNI_TCM](ERROR): CRC does not match. Expected:0x7536 got:0x60886 2018-01-23T17:16:02.159Z,1516727762.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:02.571Z,1516727762.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:02.966Z,1516727762.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:03.365Z,1516727763.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:03.757Z,1516727763.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:06.853Z,1516727766.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:06.985Z,1516727766.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:07.370Z,1516727767.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:07.750Z,1516727767.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:08.133Z,1516727768.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:08.534Z,1516727768.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:08.937Z,1516727768.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:09.332Z,1516727769.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:09.733Z,1516727769.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:10.150Z,1516727770.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:10.537Z,1516727770.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:10.938Z,1516727770.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:11.341Z,1516727771.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:11.736Z,1516727771.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:12.113Z,1516727772.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:12.511Z,1516727772.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:12.945Z,1516727772.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:13.352Z,1516727773.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:13.742Z,1516727773.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:14.122Z,1516727774.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:14.518Z,1516727774.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:14.928Z,1516727774.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:15.325Z,1516727775.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:15.723Z,1516727775.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:16.125Z,1516727776.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:16.525Z,1516727776.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:16.918Z,1516727776.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:17.321Z,1516727777.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:17.721Z,1516727777.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:18.121Z,1516727778.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:18.522Z,1516727778.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:18.926Z,1516727778.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:19.333Z,1516727779.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:19.727Z,1516727779.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:20.120Z,1516727780.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:20.525Z,1516727780.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:20.932Z,1516727780.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:21.319Z,1516727781.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:21.726Z,1516727781.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:22.129Z,1516727782.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:22.529Z,1516727782.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:22.918Z,1516727782.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:23.319Z,1516727783.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:23.322Z,1516727783.322 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:23.322Z,1516727783.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 279 2018-01-23T17:16:23.322Z,1516727783.322 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:16:23.334Z,1516727783.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:16:23.721Z,1516727783.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:23.734Z,1516727783.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:16:23.734Z,1516727783.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 279 2018-01-23T17:16:24.130Z,1516727784.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:24.131Z,1516727784.131 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:16:24.132Z,1516727784.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:16:24.132Z,1516727784.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:16:24.520Z,1516727784.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:24.929Z,1516727784.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:25.334Z,1516727785.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:25.730Z,1516727785.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:26.121Z,1516727786.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:26.530Z,1516727786.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:26.928Z,1516727786.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:27.322Z,1516727787.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:27.729Z,1516727787.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:28.133Z,1516727788.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:28.530Z,1516727788.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:28.921Z,1516727788.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:29.333Z,1516727789.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:29.722Z,1516727789.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:30.189Z,1516727790.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:30.530Z,1516727790.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:30.977Z,1516727790.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:31.388Z,1516727791.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:31.782Z,1516727791.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:32.155Z,1516727792.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:32.556Z,1516727792.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:32.963Z,1516727792.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:33.317Z,1516727793.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:33.750Z,1516727793.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:33.750Z,1516727793.750 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 279 2018-01-23T17:16:33.750Z,1516727793.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:16:33.752Z,1516727793.752 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:33.752Z,1516727793.752 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 279 2018-01-23T17:16:33.752Z,1516727793.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:16:33.765Z,1516727793.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:16:33.765Z,1516727793.765 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:16:34.159Z,1516727794.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:16:34.160Z,1516727794.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 279 2018-01-23T17:16:34.160Z,1516727794.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:16:34.160Z,1516727794.160 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 279 2018-01-23T17:16:34.521Z,1516727794.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:16:34.522Z,1516727794.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:16:34.522Z,1516727794.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:16:34.522Z,1516727794.522 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:16:34.523Z,1516727794.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:16:34.523Z,1516727794.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:16:34.918Z,1516727794.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:16:34.923Z,1516727794.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:35.338Z,1516727795.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:16:35.347Z,1516727795.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:35.720Z,1516727795.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:16:35.721Z,1516727795.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:36.122Z,1516727796.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:16:36.127Z,1516727796.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:36.593Z,1516727796.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:16:36.594Z,1516727796.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:36.961Z,1516727796.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:16:36.961Z,1516727796.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:37.373Z,1516727797.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:16:37.374Z,1516727797.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:37.740Z,1516727797.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:16:37.741Z,1516727797.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:38.126Z,1516727798.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:16:38.131Z,1516727798.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:38.536Z,1516727798.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:16:38.537Z,1516727798.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:38.952Z,1516727798.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:16:38.953Z,1516727798.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:39.344Z,1516727799.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:16:39.345Z,1516727799.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:39.748Z,1516727799.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:16:39.749Z,1516727799.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:40.163Z,1516727800.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:16:40.164Z,1516727800.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:40.541Z,1516727800.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:16:40.542Z,1516727800.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:40.921Z,1516727800.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:16:40.922Z,1516727800.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:41.354Z,1516727801.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:16:41.355Z,1516727801.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:41.749Z,1516727801.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:16:41.750Z,1516727801.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:42.133Z,1516727802.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:16:42.134Z,1516727802.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:42.544Z,1516727802.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:16:42.545Z,1516727802.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:42.944Z,1516727802.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:16:42.945Z,1516727802.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:43.369Z,1516727803.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:16:43.370Z,1516727803.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:43.762Z,1516727803.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:16:43.763Z,1516727803.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:44.139Z,1516727804.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:16:44.140Z,1516727804.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:44.571Z,1516727804.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:16:44.573Z,1516727804.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:44.940Z,1516727804.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:16:44.941Z,1516727804.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:45.330Z,1516727805.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:16:45.336Z,1516727805.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:45.744Z,1516727805.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:16:45.744Z,1516727805.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:46.149Z,1516727806.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:16:46.150Z,1516727806.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:46.549Z,1516727806.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:16:46.550Z,1516727806.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:46.942Z,1516727806.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:16:46.951Z,1516727806.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:47.328Z,1516727807.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:16:47.329Z,1516727807.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:47.722Z,1516727807.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:16:47.727Z,1516727807.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:48.115Z,1516727808.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:16:48.116Z,1516727808.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:48.520Z,1516727808.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:16:48.521Z,1516727808.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:48.937Z,1516727808.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:16:48.938Z,1516727808.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:49.345Z,1516727809.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:16:49.346Z,1516727809.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:49.737Z,1516727809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:16:49.738Z,1516727809.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:50.121Z,1516727810.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:16:50.122Z,1516727810.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:50.533Z,1516727810.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:16:50.534Z,1516727810.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:50.949Z,1516727810.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:16:50.950Z,1516727810.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:51.325Z,1516727811.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:16:51.325Z,1516727811.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:51.732Z,1516727811.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:16:51.733Z,1516727811.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:52.150Z,1516727812.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:16:52.151Z,1516727812.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:52.542Z,1516727812.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:16:52.548Z,1516727812.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:53.001Z,1516727813.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T17:16:53.002Z,1516727813.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:53.340Z,1516727813.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:16:53.341Z,1516727813.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:53.719Z,1516727813.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:16:53.720Z,1516727813.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:54.141Z,1516727814.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:54.519Z,1516727814.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:54.940Z,1516727814.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:55.346Z,1516727815.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:55.746Z,1516727815.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:56.141Z,1516727816.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:56.517Z,1516727816.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:56.917Z,1516727816.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:57.317Z,1516727817.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:57.738Z,1516727817.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:58.145Z,1516727818.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:58.555Z,1516727818.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:58.933Z,1516727818.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:59.341Z,1516727819.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:16:59.737Z,1516727819.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:00.112Z,1516727820.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:00.515Z,1516727820.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:00.943Z,1516727820.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:01.347Z,1516727821.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:01.753Z,1516727821.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:02.142Z,1516727822.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:02.150Z,1516727822.150 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:12:01.9Z 2018-01-23T17:17:02.150Z,1516727822.150 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:17:02.150Z,1516727822.150 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:17:02.520Z,1516727822.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:03.055Z,1516727823.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:03.344Z,1516727823.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:06.479Z,1516727826.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:06.555Z,1516727826.555 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0328.lzma 2018-01-23T17:17:06.629Z,1516727826.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:06.982Z,1516727826.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:07.334Z,1516727827.334 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0328.lzma.bak 2018-01-23T17:17:07.334Z,1516727827.334 [DataOverHttps](INFO): SBD MOMSN=7756085 2018-01-23T17:17:07.388Z,1516727827.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:08.026Z,1516727828.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:08.208Z,1516727828.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:11.279Z,1516727831.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:11.423Z,1516727831.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:11.834Z,1516727831.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:12.168Z,1516727832.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:12.563Z,1516727832.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:12.963Z,1516727832.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:16.041Z,1516727836.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:16.119Z,1516727836.119 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0329.lzma 2018-01-23T17:17:16.203Z,1516727836.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:16.569Z,1516727836.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:16.905Z,1516727836.905 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0329.lzma.bak 2018-01-23T17:17:16.905Z,1516727836.905 [DataOverHttps](INFO): SBD MOMSN=7756087 2018-01-23T17:17:16.981Z,1516727836.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:17.613Z,1516727837.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:17.620Z,1516727837.620 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:17:17.620Z,1516727837.620 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:17:17.620Z,1516727837.620 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:17:17.760Z,1516727837.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:20.841Z,1516727840.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:20.965Z,1516727840.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:21.341Z,1516727841.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:21.746Z,1516727841.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:22.145Z,1516727842.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:22.531Z,1516727842.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:22.932Z,1516727842.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:23.333Z,1516727843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:23.741Z,1516727843.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:24.141Z,1516727844.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:24.541Z,1516727844.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:24.937Z,1516727844.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:25.344Z,1516727845.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:25.740Z,1516727845.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:26.134Z,1516727846.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:26.532Z,1516727846.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:26.942Z,1516727846.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:27.346Z,1516727847.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:27.741Z,1516727847.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:28.137Z,1516727848.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:28.541Z,1516727848.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:28.936Z,1516727848.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:29.341Z,1516727849.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:29.745Z,1516727849.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:30.141Z,1516727850.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:30.541Z,1516727850.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:30.937Z,1516727850.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:31.335Z,1516727851.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:31.733Z,1516727851.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:32.133Z,1516727852.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:32.533Z,1516727852.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:32.946Z,1516727852.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:33.349Z,1516727853.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:33.749Z,1516727853.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:34.137Z,1516727854.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:34.549Z,1516727854.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:34.928Z,1516727854.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:35.328Z,1516727855.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:35.738Z,1516727855.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:36.162Z,1516727856.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:36.536Z,1516727856.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:36.925Z,1516727856.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:37.324Z,1516727857.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:37.725Z,1516727857.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:38.155Z,1516727858.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:38.532Z,1516727858.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:38.941Z,1516727858.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:39.342Z,1516727859.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:39.745Z,1516727859.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:40.134Z,1516727860.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:40.531Z,1516727860.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:40.932Z,1516727860.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:41.330Z,1516727861.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:41.741Z,1516727861.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:42.136Z,1516727862.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:42.540Z,1516727862.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:42.933Z,1516727862.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:43.332Z,1516727863.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:43.741Z,1516727863.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:44.138Z,1516727864.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:44.537Z,1516727864.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:44.940Z,1516727864.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:45.335Z,1516727865.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:45.742Z,1516727865.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:46.141Z,1516727866.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:46.541Z,1516727866.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:46.933Z,1516727866.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:47.333Z,1516727867.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:47.742Z,1516727867.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:48.141Z,1516727868.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:48.546Z,1516727868.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:48.935Z,1516727868.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:49.334Z,1516727869.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:49.742Z,1516727869.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:50.146Z,1516727870.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:50.543Z,1516727870.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:50.935Z,1516727870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:51.342Z,1516727871.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:51.743Z,1516727871.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:52.146Z,1516727872.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:52.545Z,1516727872.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:52.940Z,1516727872.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:53.331Z,1516727873.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:53.741Z,1516727873.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:54.149Z,1516727874.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:54.543Z,1516727874.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:54.939Z,1516727874.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:55.335Z,1516727875.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:55.742Z,1516727875.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:56.145Z,1516727876.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:56.542Z,1516727876.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:56.934Z,1516727876.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:57.339Z,1516727877.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:57.747Z,1516727877.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:58.149Z,1516727878.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:58.542Z,1516727878.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:58.937Z,1516727878.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:59.373Z,1516727879.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:17:59.744Z,1516727879.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:00.146Z,1516727880.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:00.544Z,1516727880.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:00.940Z,1516727880.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:01.337Z,1516727881.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:01.743Z,1516727881.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:02.155Z,1516727882.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:02.548Z,1516727882.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:02.948Z,1516727882.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:03.341Z,1516727883.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:03.748Z,1516727883.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:04.150Z,1516727884.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:04.552Z,1516727884.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:04.947Z,1516727884.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:05.321Z,1516727885.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:05.765Z,1516727885.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:06.153Z,1516727886.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:06.555Z,1516727886.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:06.932Z,1516727886.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:07.331Z,1516727887.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:07.738Z,1516727887.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:08.138Z,1516727888.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:08.540Z,1516727888.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:08.933Z,1516727888.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:09.329Z,1516727889.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:09.737Z,1516727889.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:10.138Z,1516727890.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:10.541Z,1516727890.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:10.933Z,1516727890.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:11.331Z,1516727891.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:11.741Z,1516727891.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:12.141Z,1516727892.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:12.537Z,1516727892.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:12.934Z,1516727892.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:13.332Z,1516727893.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:13.745Z,1516727893.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:14.142Z,1516727894.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:14.545Z,1516727894.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:14.934Z,1516727894.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:15.332Z,1516727895.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:15.738Z,1516727895.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:16.145Z,1516727896.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:16.549Z,1516727896.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:16.937Z,1516727896.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:17.331Z,1516727897.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:17.741Z,1516727897.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:18.142Z,1516727898.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:21.245Z,1516727901.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:21.377Z,1516727901.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:21.737Z,1516727901.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:22.139Z,1516727902.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:22.539Z,1516727902.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:22.944Z,1516727902.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:23.346Z,1516727903.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:23.743Z,1516727903.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:24.141Z,1516727904.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:24.535Z,1516727904.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:24.940Z,1516727904.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:25.335Z,1516727905.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:25.746Z,1516727905.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:26.142Z,1516727906.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:26.555Z,1516727906.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:26.947Z,1516727906.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:27.335Z,1516727907.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:27.744Z,1516727907.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:28.133Z,1516727908.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:28.523Z,1516727908.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:28.953Z,1516727908.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:29.361Z,1516727909.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:29.753Z,1516727909.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:30.159Z,1516727910.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:30.533Z,1516727910.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:30.937Z,1516727910.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:31.337Z,1516727911.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:31.742Z,1516727911.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:32.146Z,1516727912.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:32.542Z,1516727912.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:32.941Z,1516727912.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:33.334Z,1516727913.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:33.732Z,1516727913.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:34.137Z,1516727914.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:34.532Z,1516727914.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:34.937Z,1516727914.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:35.338Z,1516727915.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:35.741Z,1516727915.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:36.132Z,1516727916.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:36.534Z,1516727916.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:36.937Z,1516727916.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:37.335Z,1516727917.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:37.735Z,1516727917.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:38.141Z,1516727918.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:38.546Z,1516727918.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:38.942Z,1516727918.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:39.331Z,1516727919.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:39.734Z,1516727919.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:40.136Z,1516727920.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:40.532Z,1516727920.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:40.944Z,1516727920.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:41.345Z,1516727921.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:41.742Z,1516727921.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:42.133Z,1516727922.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:42.544Z,1516727922.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:42.938Z,1516727922.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:43.336Z,1516727923.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:43.745Z,1516727923.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:44.148Z,1516727924.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:44.561Z,1516727924.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:44.949Z,1516727924.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:45.334Z,1516727925.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:45.749Z,1516727925.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:46.124Z,1516727926.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:46.523Z,1516727926.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:46.956Z,1516727926.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:47.355Z,1516727927.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:47.753Z,1516727927.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:48.137Z,1516727928.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:48.532Z,1516727928.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:48.930Z,1516727928.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:49.336Z,1516727929.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:49.738Z,1516727929.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:50.134Z,1516727930.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:50.538Z,1516727930.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:50.934Z,1516727930.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:51.331Z,1516727931.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:51.734Z,1516727931.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:52.136Z,1516727932.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:52.532Z,1516727932.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:52.942Z,1516727932.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:53.341Z,1516727933.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:53.749Z,1516727933.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:54.137Z,1516727934.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:54.545Z,1516727934.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:54.939Z,1516727934.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:55.341Z,1516727935.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:55.741Z,1516727935.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:56.146Z,1516727936.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:56.561Z,1516727936.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:56.948Z,1516727936.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:57.323Z,1516727937.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:57.728Z,1516727937.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:58.132Z,1516727938.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:58.535Z,1516727938.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:58.963Z,1516727938.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:59.342Z,1516727939.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:18:59.734Z,1516727939.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:00.133Z,1516727940.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:00.530Z,1516727940.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:00.930Z,1516727940.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:01.331Z,1516727941.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:01.737Z,1516727941.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:02.134Z,1516727942.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:02.545Z,1516727942.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:02.934Z,1516727942.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:03.330Z,1516727943.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:03.742Z,1516727943.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:04.136Z,1516727944.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:04.532Z,1516727944.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:04.953Z,1516727944.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:05.345Z,1516727945.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:05.802Z,1516727945.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:06.140Z,1516727946.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:06.539Z,1516727946.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:06.932Z,1516727946.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:07.336Z,1516727947.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:07.741Z,1516727947.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:08.142Z,1516727948.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:08.553Z,1516727948.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:08.945Z,1516727948.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:09.331Z,1516727949.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:09.736Z,1516727949.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:10.136Z,1516727950.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:10.532Z,1516727950.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:10.942Z,1516727950.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:11.349Z,1516727951.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:11.741Z,1516727951.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:12.139Z,1516727952.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:12.541Z,1516727952.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:12.939Z,1516727952.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:13.342Z,1516727953.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:13.741Z,1516727953.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:14.141Z,1516727954.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:14.553Z,1516727954.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:14.953Z,1516727954.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:15.335Z,1516727955.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:15.740Z,1516727955.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:16.136Z,1516727956.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:16.539Z,1516727956.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:16.942Z,1516727956.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:17.346Z,1516727957.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:17.743Z,1516727957.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:18.142Z,1516727958.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:18.537Z,1516727958.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:21.637Z,1516727961.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:21.748Z,1516727961.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:22.123Z,1516727962.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:22.537Z,1516727962.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:22.932Z,1516727962.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:23.303Z,1516727963.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:23.712Z,1516727963.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:24.104Z,1516727964.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:24.503Z,1516727964.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:24.505Z,1516727964.505 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:24.505Z,1516727964.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 280 2018-01-23T17:19:24.505Z,1516727964.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:19:24.525Z,1516727964.525 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:19:24.916Z,1516727964.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:24.965Z,1516727964.965 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:19:24.965Z,1516727964.965 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 280 2018-01-23T17:19:25.313Z,1516727965.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:25.314Z,1516727965.314 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:19:25.314Z,1516727965.314 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:19:25.315Z,1516727965.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:19:25.717Z,1516727965.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:26.104Z,1516727966.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:26.502Z,1516727966.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:26.912Z,1516727966.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:27.305Z,1516727967.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:27.704Z,1516727967.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:28.117Z,1516727968.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:28.512Z,1516727968.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:28.913Z,1516727968.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:29.303Z,1516727969.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:29.705Z,1516727969.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:30.110Z,1516727970.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:30.504Z,1516727970.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:30.920Z,1516727970.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:31.314Z,1516727971.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:31.726Z,1516727971.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:32.112Z,1516727972.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:32.505Z,1516727972.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:32.914Z,1516727972.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:33.309Z,1516727973.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:33.706Z,1516727973.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:34.115Z,1516727974.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:34.518Z,1516727974.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:34.917Z,1516727974.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:34.917Z,1516727974.917 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 280 2018-01-23T17:19:34.917Z,1516727974.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:19:34.919Z,1516727974.919 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:34.919Z,1516727974.919 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 280 2018-01-23T17:19:34.919Z,1516727974.919 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:19:34.957Z,1516727974.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:19:34.957Z,1516727974.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:19:35.332Z,1516727975.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:19:35.332Z,1516727975.332 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 280 2018-01-23T17:19:35.333Z,1516727975.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:19:35.333Z,1516727975.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 280 2018-01-23T17:19:35.706Z,1516727975.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:19:35.706Z,1516727975.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:19:35.707Z,1516727975.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:19:35.707Z,1516727975.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:19:35.707Z,1516727975.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:19:35.708Z,1516727975.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:19:36.111Z,1516727976.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:19:36.112Z,1516727976.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:36.521Z,1516727976.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:19:36.522Z,1516727976.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:36.922Z,1516727976.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:19:36.923Z,1516727976.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:37.315Z,1516727977.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:19:37.316Z,1516727977.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:37.716Z,1516727977.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:19:37.717Z,1516727977.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:38.118Z,1516727978.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:19:38.119Z,1516727978.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:38.508Z,1516727978.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:19:38.509Z,1516727978.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:38.928Z,1516727978.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:19:38.929Z,1516727978.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:39.318Z,1516727979.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:19:39.319Z,1516727979.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:39.727Z,1516727979.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:19:39.728Z,1516727979.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:40.114Z,1516727980.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:19:40.115Z,1516727980.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:40.512Z,1516727980.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:19:40.513Z,1516727980.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:40.918Z,1516727980.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:19:40.919Z,1516727980.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:41.329Z,1516727981.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:19:41.330Z,1516727981.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:41.719Z,1516727981.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:19:41.720Z,1516727981.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:42.114Z,1516727982.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:19:42.115Z,1516727982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:42.515Z,1516727982.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:19:42.516Z,1516727982.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:42.921Z,1516727982.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:19:42.922Z,1516727982.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:43.317Z,1516727983.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:19:43.318Z,1516727983.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:43.732Z,1516727983.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:19:43.733Z,1516727983.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:44.113Z,1516727984.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:19:44.114Z,1516727984.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:44.515Z,1516727984.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:19:44.516Z,1516727984.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:44.915Z,1516727984.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:19:44.916Z,1516727984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:45.328Z,1516727985.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:19:45.329Z,1516727985.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:45.717Z,1516727985.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:19:45.718Z,1516727985.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:46.115Z,1516727986.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:19:46.116Z,1516727986.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:46.517Z,1516727986.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:19:46.518Z,1516727986.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:46.921Z,1516727986.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:19:46.923Z,1516727986.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:47.332Z,1516727987.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:19:47.333Z,1516727987.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:47.724Z,1516727987.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:19:47.725Z,1516727987.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:48.115Z,1516727988.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:19:48.116Z,1516727988.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:48.509Z,1516727988.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:19:48.510Z,1516727988.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:48.922Z,1516727988.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:19:48.923Z,1516727988.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:49.326Z,1516727989.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:19:49.327Z,1516727989.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:49.723Z,1516727989.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:19:49.724Z,1516727989.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:50.121Z,1516727990.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:19:50.122Z,1516727990.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:50.516Z,1516727990.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:19:50.517Z,1516727990.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:50.926Z,1516727990.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:19:50.928Z,1516727990.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:51.324Z,1516727991.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:19:51.325Z,1516727991.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:51.725Z,1516727991.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:19:51.725Z,1516727991.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:52.113Z,1516727992.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:19:52.114Z,1516727992.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:52.518Z,1516727992.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:19:52.519Z,1516727992.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:52.908Z,1516727992.908 [PNI_TCM](ERROR): CRC does not match. Expected:0x62480 got:0x14200 2018-01-23T17:19:52.936Z,1516727992.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:19:52.937Z,1516727992.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:53.321Z,1516727993.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:19:53.322Z,1516727993.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:53.722Z,1516727993.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:19:53.723Z,1516727993.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:54.116Z,1516727994.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:19:54.117Z,1516727994.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:54.510Z,1516727994.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:19:54.511Z,1516727994.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:54.925Z,1516727994.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:55.322Z,1516727995.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:55.728Z,1516727995.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:56.128Z,1516727996.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:56.493Z,1516727996.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x36715 got:0x19463 2018-01-23T17:19:56.525Z,1516727996.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:56.926Z,1516727996.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:57.333Z,1516727997.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:57.724Z,1516727997.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:58.100Z,1516727998.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:58.526Z,1516727998.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:58.933Z,1516727998.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:59.323Z,1516727999.323 [PNI_TCM](ERROR): CRC does not match. Expected:0x51630 got:0x16838 2018-01-23T17:19:59.349Z,1516727999.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:19:59.732Z,1516727999.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:00.109Z,1516728000.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:00.527Z,1516728000.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:00.914Z,1516728000.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:01.313Z,1516728001.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:01.714Z,1516728001.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:02.127Z,1516728002.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:02.507Z,1516728002.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:02.917Z,1516728002.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:03.315Z,1516728003.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:03.736Z,1516728003.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:04.121Z,1516728004.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:04.514Z,1516728004.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:04.917Z,1516728004.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:05.344Z,1516728005.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:05.711Z,1516728005.711 [PNI_TCM](ERROR): CRC does not match. Expected:0x53432 got:0x25095 2018-01-23T17:20:05.751Z,1516728005.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:06.125Z,1516728006.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:06.504Z,1516728006.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x51856 got:0x4352 2018-01-23T17:20:06.529Z,1516728006.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:06.951Z,1516728006.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:07.312Z,1516728007.312 [PNI_TCM](ERROR): CRC does not match. Expected:0x16069 got:0x17072 2018-01-23T17:20:07.350Z,1516728007.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:07.718Z,1516728007.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:08.114Z,1516728008.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:08.524Z,1516728008.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:08.920Z,1516728008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:09.333Z,1516728009.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:09.727Z,1516728009.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:10.127Z,1516728010.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:10.516Z,1516728010.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:10.924Z,1516728010.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:11.322Z,1516728011.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:11.733Z,1516728011.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:12.111Z,1516728012.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:12.517Z,1516728012.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:12.921Z,1516728012.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:13.340Z,1516728013.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:13.722Z,1516728013.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:14.121Z,1516728014.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:14.506Z,1516728014.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:14.917Z,1516728014.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:15.330Z,1516728015.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:15.729Z,1516728015.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:16.127Z,1516728016.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:16.529Z,1516728016.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:16.909Z,1516728016.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:17.323Z,1516728017.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:17.709Z,1516728017.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:18.107Z,1516728018.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:18.510Z,1516728018.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:18.937Z,1516728018.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:22.005Z,1516728022.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:22.140Z,1516728022.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:22.534Z,1516728022.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:22.914Z,1516728022.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:23.309Z,1516728023.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:23.699Z,1516728023.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:24.101Z,1516728024.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:24.502Z,1516728024.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:24.904Z,1516728024.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:25.310Z,1516728025.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:25.720Z,1516728025.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:26.112Z,1516728026.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:26.509Z,1516728026.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:26.909Z,1516728026.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:27.299Z,1516728027.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:27.709Z,1516728027.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:28.109Z,1516728028.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:28.516Z,1516728028.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:28.924Z,1516728028.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:29.307Z,1516728029.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:29.709Z,1516728029.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:30.113Z,1516728030.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:30.508Z,1516728030.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:30.913Z,1516728030.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:31.315Z,1516728031.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:31.717Z,1516728031.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:32.122Z,1516728032.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:32.512Z,1516728032.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:32.911Z,1516728032.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:33.312Z,1516728033.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:33.712Z,1516728033.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:34.119Z,1516728034.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:34.520Z,1516728034.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:34.919Z,1516728034.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:35.313Z,1516728035.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:35.715Z,1516728035.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:36.112Z,1516728036.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:36.512Z,1516728036.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:36.912Z,1516728036.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:37.335Z,1516728037.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:37.731Z,1516728037.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:38.108Z,1516728038.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:38.505Z,1516728038.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:38.899Z,1516728038.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:39.300Z,1516728039.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:39.700Z,1516728039.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:40.110Z,1516728040.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:40.513Z,1516728040.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:40.909Z,1516728040.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:41.305Z,1516728041.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:41.703Z,1516728041.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:42.105Z,1516728042.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:42.502Z,1516728042.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:42.911Z,1516728042.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:43.310Z,1516728043.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:43.713Z,1516728043.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:44.116Z,1516728044.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:44.501Z,1516728044.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:44.910Z,1516728044.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:45.301Z,1516728045.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:45.702Z,1516728045.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:46.111Z,1516728046.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:46.514Z,1516728046.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:46.912Z,1516728046.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:47.306Z,1516728047.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:47.707Z,1516728047.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:48.112Z,1516728048.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:48.508Z,1516728048.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:48.919Z,1516728048.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:49.312Z,1516728049.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:49.713Z,1516728049.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:50.119Z,1516728050.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:50.509Z,1516728050.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:50.907Z,1516728050.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:51.311Z,1516728051.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:51.700Z,1516728051.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:52.111Z,1516728052.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:52.513Z,1516728052.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:52.912Z,1516728052.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:53.309Z,1516728053.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:53.708Z,1516728053.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:54.104Z,1516728054.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:54.508Z,1516728054.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:54.911Z,1516728054.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:55.312Z,1516728055.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:55.721Z,1516728055.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:56.120Z,1516728056.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:56.501Z,1516728056.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:56.909Z,1516728056.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:57.304Z,1516728057.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:57.706Z,1516728057.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:58.112Z,1516728058.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:58.533Z,1516728058.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:58.917Z,1516728058.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:59.312Z,1516728059.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:20:59.713Z,1516728059.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:00.112Z,1516728060.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:00.512Z,1516728060.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:00.895Z,1516728060.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:01.314Z,1516728061.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:01.726Z,1516728061.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:02.106Z,1516728062.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:02.499Z,1516728062.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:02.904Z,1516728062.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:03.304Z,1516728063.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:03.700Z,1516728063.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:04.102Z,1516728064.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:04.505Z,1516728064.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:04.902Z,1516728064.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:05.305Z,1516728065.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:05.697Z,1516728065.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:06.100Z,1516728066.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:06.501Z,1516728066.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:06.910Z,1516728066.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:07.312Z,1516728067.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:07.713Z,1516728067.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:08.109Z,1516728068.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:08.501Z,1516728068.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:08.905Z,1516728068.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:09.302Z,1516728069.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:09.705Z,1516728069.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:10.111Z,1516728070.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:10.513Z,1516728070.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:10.914Z,1516728070.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:11.301Z,1516728071.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:11.702Z,1516728071.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:12.108Z,1516728072.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:12.508Z,1516728072.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:12.906Z,1516728072.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:13.310Z,1516728073.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:13.725Z,1516728073.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:14.110Z,1516728074.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:14.498Z,1516728074.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:14.912Z,1516728074.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:15.309Z,1516728075.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:15.707Z,1516728075.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:16.112Z,1516728076.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:16.551Z,1516728076.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:16.912Z,1516728076.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:17.302Z,1516728077.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:17.713Z,1516728077.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:18.115Z,1516728078.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:18.517Z,1516728078.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:18.895Z,1516728078.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:19.322Z,1516728079.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:22.433Z,1516728082.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:22.593Z,1516728082.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:22.925Z,1516728082.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:23.309Z,1516728083.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:23.701Z,1516728083.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:24.103Z,1516728084.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:24.507Z,1516728084.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:24.903Z,1516728084.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:25.299Z,1516728085.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:25.699Z,1516728085.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:26.101Z,1516728086.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:26.500Z,1516728086.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:26.899Z,1516728086.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:27.302Z,1516728087.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:27.706Z,1516728087.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:28.105Z,1516728088.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:28.505Z,1516728088.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:28.899Z,1516728088.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:29.300Z,1516728089.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:29.705Z,1516728089.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:30.109Z,1516728090.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:30.504Z,1516728090.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:30.909Z,1516728090.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:31.299Z,1516728091.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:31.699Z,1516728091.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:32.099Z,1516728092.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:32.507Z,1516728092.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:32.900Z,1516728092.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:33.309Z,1516728093.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:33.713Z,1516728093.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:34.116Z,1516728094.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:34.501Z,1516728094.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:34.909Z,1516728094.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:35.301Z,1516728095.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:35.700Z,1516728095.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:36.111Z,1516728096.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:36.509Z,1516728096.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:36.909Z,1516728096.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:37.305Z,1516728097.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:37.701Z,1516728097.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:38.099Z,1516728098.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:38.502Z,1516728098.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:38.900Z,1516728098.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:39.309Z,1516728099.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:39.721Z,1516728099.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:40.121Z,1516728100.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:40.509Z,1516728100.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:40.900Z,1516728100.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:41.304Z,1516728101.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:41.709Z,1516728101.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:42.109Z,1516728102.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:42.516Z,1516728102.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:42.913Z,1516728102.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:43.302Z,1516728103.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:43.700Z,1516728103.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:44.109Z,1516728104.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:44.522Z,1516728104.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:44.910Z,1516728104.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:45.301Z,1516728105.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:45.713Z,1516728105.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:46.118Z,1516728106.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:46.525Z,1516728106.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:46.914Z,1516728106.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:47.312Z,1516728107.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:47.705Z,1516728107.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:48.110Z,1516728108.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:48.521Z,1516728108.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:48.910Z,1516728108.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:49.307Z,1516728109.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:49.703Z,1516728109.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:50.110Z,1516728110.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:50.515Z,1516728110.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:50.929Z,1516728110.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:51.310Z,1516728111.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:51.713Z,1516728111.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:52.122Z,1516728112.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:52.521Z,1516728112.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:52.929Z,1516728112.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:53.318Z,1516728113.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:53.717Z,1516728113.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:54.121Z,1516728114.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:54.521Z,1516728114.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:54.925Z,1516728114.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:55.317Z,1516728115.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:55.700Z,1516728115.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:56.121Z,1516728116.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:56.542Z,1516728116.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:56.927Z,1516728116.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:57.300Z,1516728117.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:57.696Z,1516728117.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:58.126Z,1516728118.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:58.523Z,1516728118.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:58.923Z,1516728118.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:59.300Z,1516728119.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:21:59.700Z,1516728119.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:00.106Z,1516728120.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:00.532Z,1516728120.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:00.929Z,1516728120.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:01.309Z,1516728121.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:01.702Z,1516728121.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:02.114Z,1516728122.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:02.506Z,1516728122.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:02.905Z,1516728122.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:03.308Z,1516728123.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:03.699Z,1516728123.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:04.110Z,1516728124.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:04.509Z,1516728124.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:04.917Z,1516728124.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:05.305Z,1516728125.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:05.704Z,1516728125.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:06.110Z,1516728126.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:06.517Z,1516728126.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:06.909Z,1516728126.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:07.302Z,1516728127.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:07.700Z,1516728127.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:08.109Z,1516728128.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:08.521Z,1516728128.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:08.920Z,1516728128.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:09.304Z,1516728129.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:09.705Z,1516728129.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:10.110Z,1516728130.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:10.510Z,1516728130.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:10.910Z,1516728130.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:11.313Z,1516728131.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:11.708Z,1516728131.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:12.114Z,1516728132.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:12.519Z,1516728132.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:12.912Z,1516728132.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:13.312Z,1516728133.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:13.705Z,1516728133.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:14.111Z,1516728134.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:14.517Z,1516728134.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:14.915Z,1516728134.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:15.298Z,1516728135.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:15.709Z,1516728135.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:16.115Z,1516728136.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:16.525Z,1516728136.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:16.914Z,1516728136.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:17.322Z,1516728137.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:17.716Z,1516728137.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:18.113Z,1516728138.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:18.116Z,1516728138.116 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:22:18.116Z,1516728138.116 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:22:18.116Z,1516728138.116 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:22:18.117Z,1516728138.117 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:22:18.527Z,1516728138.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:18.530Z,1516728138.530 [Default:CheckIn:D] Stopped 2018-01-23T17:22:18.530Z,1516728138.530 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:22:18.912Z,1516728138.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:18.915Z,1516728138.915 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 844.441146 min 2018-01-23T17:22:18.915Z,1516728138.915 [Default:CheckIn:E] Stopped 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn] Stopped 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn](INFO): Running loop #83 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn] Running Loop=83 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:22:18.916Z,1516728138.916 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:22:19.315Z,1516728139.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:19.717Z,1516728139.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:22.793Z,1516728142.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:22.937Z,1516728142.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:23.297Z,1516728143.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:23.690Z,1516728143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:24.092Z,1516728144.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:24.483Z,1516728144.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:24.884Z,1516728144.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:25.293Z,1516728145.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:25.693Z,1516728145.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:25.696Z,1516728145.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:25.696Z,1516728145.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 281 2018-01-23T17:22:25.696Z,1516728145.696 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:22:25.732Z,1516728145.732 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:22:26.093Z,1516728146.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:26.106Z,1516728146.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:22:26.106Z,1516728146.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 281 2018-01-23T17:22:26.492Z,1516728146.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:26.493Z,1516728146.493 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:22:26.493Z,1516728146.493 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:22:26.494Z,1516728146.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:22:26.886Z,1516728146.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:27.285Z,1516728147.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:27.688Z,1516728147.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:28.095Z,1516728148.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:28.496Z,1516728148.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:28.898Z,1516728148.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:29.305Z,1516728149.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:29.694Z,1516728149.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:30.092Z,1516728150.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:30.493Z,1516728150.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:30.882Z,1516728150.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:31.305Z,1516728151.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:31.698Z,1516728151.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:32.103Z,1516728152.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:32.476Z,1516728152.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:32.876Z,1516728152.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:33.274Z,1516728153.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:33.704Z,1516728153.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:34.079Z,1516728154.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:34.502Z,1516728154.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:34.910Z,1516728154.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:35.315Z,1516728155.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:35.691Z,1516728155.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:36.084Z,1516728156.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:36.084Z,1516728156.084 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 281 2018-01-23T17:22:36.084Z,1516728156.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:22:36.086Z,1516728156.086 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:36.086Z,1516728156.086 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 281 2018-01-23T17:22:36.086Z,1516728156.086 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:22:36.111Z,1516728156.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:22:36.111Z,1516728156.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:22:36.494Z,1516728156.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:22:36.494Z,1516728156.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 281 2018-01-23T17:22:36.495Z,1516728156.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:22:36.495Z,1516728156.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 281 2018-01-23T17:22:36.884Z,1516728156.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:22:36.885Z,1516728156.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:22:36.885Z,1516728156.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:22:36.885Z,1516728156.885 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:22:36.886Z,1516728156.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:22:36.886Z,1516728156.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:22:37.293Z,1516728157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:22:37.294Z,1516728157.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:37.696Z,1516728157.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:22:37.697Z,1516728157.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:38.094Z,1516728158.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:22:38.095Z,1516728158.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:38.487Z,1516728158.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:22:38.488Z,1516728158.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:38.883Z,1516728158.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:22:38.884Z,1516728158.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:39.286Z,1516728159.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:22:39.287Z,1516728159.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:39.686Z,1516728159.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:22:39.691Z,1516728159.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:40.086Z,1516728160.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:22:40.087Z,1516728160.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:40.499Z,1516728160.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:22:40.500Z,1516728160.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:40.898Z,1516728160.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:22:40.899Z,1516728160.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:41.293Z,1516728161.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:22:41.294Z,1516728161.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:41.686Z,1516728161.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:22:41.687Z,1516728161.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:42.093Z,1516728162.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:22:42.094Z,1516728162.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:42.495Z,1516728162.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:22:42.496Z,1516728162.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:42.892Z,1516728162.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:22:42.893Z,1516728162.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:43.296Z,1516728163.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:22:43.297Z,1516728163.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:43.692Z,1516728163.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:22:43.693Z,1516728163.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:44.093Z,1516728164.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:22:44.094Z,1516728164.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:44.484Z,1516728164.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:22:44.485Z,1516728164.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:44.882Z,1516728164.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:22:44.883Z,1516728164.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:45.281Z,1516728165.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:22:45.282Z,1516728165.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:45.686Z,1516728165.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:22:45.691Z,1516728165.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:46.082Z,1516728166.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:22:46.083Z,1516728166.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:46.494Z,1516728166.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:22:46.495Z,1516728166.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:46.904Z,1516728166.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:22:46.905Z,1516728166.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:47.300Z,1516728167.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:22:47.301Z,1516728167.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:47.684Z,1516728167.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:22:47.684Z,1516728167.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:48.084Z,1516728168.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:22:48.085Z,1516728168.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:48.488Z,1516728168.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:22:48.489Z,1516728168.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:48.888Z,1516728168.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:22:48.889Z,1516728168.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:49.293Z,1516728169.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:22:49.294Z,1516728169.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:49.696Z,1516728169.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:22:49.697Z,1516728169.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:50.105Z,1516728170.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:22:50.106Z,1516728170.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:50.491Z,1516728170.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:22:50.492Z,1516728170.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:50.878Z,1516728170.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:22:50.903Z,1516728170.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:51.273Z,1516728171.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:22:51.274Z,1516728171.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:51.676Z,1516728171.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:22:51.677Z,1516728171.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:52.083Z,1516728172.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:22:52.084Z,1516728172.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:52.498Z,1516728172.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:22:52.499Z,1516728172.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:52.852Z,1516728172.852 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T17:22:52.852Z,1516728172.852 [NAL9602] Data Fault, FailCount= 2 2018-01-23T17:22:52.852Z,1516728172.852 [NAL9602](ERROR): Data Fault 2018-01-23T17:22:52.884Z,1516728172.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:22:52.885Z,1516728172.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:52.923Z,1516728172.923 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T17:22:53.248Z,1516728173.248 [NAL9602](INFO): Powering down 2018-01-23T17:22:53.281Z,1516728173.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:22:53.282Z,1516728173.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:53.683Z,1516728173.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:22:53.684Z,1516728173.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:54.082Z,1516728174.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:22:54.083Z,1516728174.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:54.096Z,1516728174.096 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:22:54.096Z,1516728174.096 [NAL9602] No Fault, FailCount= 2 2018-01-23T17:22:54.483Z,1516728174.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:22:54.483Z,1516728174.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:54.882Z,1516728174.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:22:54.884Z,1516728174.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:55.285Z,1516728175.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:22:55.286Z,1516728175.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:55.686Z,1516728175.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:22:55.687Z,1516728175.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:56.087Z,1516728176.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:56.482Z,1516728176.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:56.883Z,1516728176.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:57.283Z,1516728177.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:57.688Z,1516728177.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:58.087Z,1516728178.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:58.487Z,1516728178.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:58.888Z,1516728178.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:59.286Z,1516728179.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:22:59.681Z,1516728179.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:00.084Z,1516728180.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:00.486Z,1516728180.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:00.891Z,1516728180.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:01.287Z,1516728181.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:01.690Z,1516728181.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:02.081Z,1516728182.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:02.494Z,1516728182.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:02.896Z,1516728182.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:03.273Z,1516728183.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:03.702Z,1516728183.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:04.101Z,1516728184.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:04.472Z,1516728184.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:04.874Z,1516728184.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:05.281Z,1516728185.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:05.676Z,1516728185.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:06.082Z,1516728186.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:06.505Z,1516728186.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:06.876Z,1516728186.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:07.282Z,1516728187.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:07.707Z,1516728187.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:08.083Z,1516728188.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:08.480Z,1516728188.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:08.884Z,1516728188.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:09.293Z,1516728189.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:09.684Z,1516728189.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:10.085Z,1516728190.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:10.483Z,1516728190.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:10.884Z,1516728190.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:11.285Z,1516728191.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:11.683Z,1516728191.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:12.097Z,1516728192.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:12.488Z,1516728192.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:12.882Z,1516728192.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:13.288Z,1516728193.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:13.687Z,1516728193.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:14.083Z,1516728194.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:14.488Z,1516728194.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:14.887Z,1516728194.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:15.283Z,1516728195.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:15.688Z,1516728195.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:16.093Z,1516728196.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:16.483Z,1516728196.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:16.887Z,1516728196.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:17.293Z,1516728197.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:17.684Z,1516728197.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:18.088Z,1516728198.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:18.485Z,1516728198.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:18.884Z,1516728198.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:19.294Z,1516728199.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:19.687Z,1516728199.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:20.085Z,1516728200.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:23.207Z,1516728203.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:23.283Z,1516728203.283 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:23:23.339Z,1516728203.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:23.733Z,1516728203.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:24.099Z,1516728204.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:24.496Z,1516728204.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:24.933Z,1516728204.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:25.304Z,1516728205.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:25.703Z,1516728205.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:26.099Z,1516728206.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:26.504Z,1516728206.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:26.899Z,1516728206.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:27.300Z,1516728207.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:27.704Z,1516728207.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:28.098Z,1516728208.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:28.500Z,1516728208.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:28.898Z,1516728208.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:29.299Z,1516728209.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:29.705Z,1516728209.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:30.100Z,1516728210.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:30.497Z,1516728210.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:30.905Z,1516728210.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:31.302Z,1516728211.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:31.702Z,1516728211.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:32.109Z,1516728212.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:32.499Z,1516728212.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:32.899Z,1516728212.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:33.316Z,1516728213.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:33.706Z,1516728213.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:34.114Z,1516728214.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:34.460Z,1516728214.460 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:23:34.513Z,1516728214.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:34.906Z,1516728214.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:35.312Z,1516728215.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:35.713Z,1516728215.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:36.112Z,1516728216.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:36.510Z,1516728216.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:36.903Z,1516728216.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:37.317Z,1516728217.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:37.718Z,1516728217.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:38.120Z,1516728218.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:38.519Z,1516728218.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:38.889Z,1516728218.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:39.292Z,1516728219.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:39.696Z,1516728219.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:40.118Z,1516728220.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:40.525Z,1516728220.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:40.928Z,1516728220.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:41.292Z,1516728221.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:41.721Z,1516728221.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:42.123Z,1516728222.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:42.493Z,1516728222.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:42.921Z,1516728222.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:43.328Z,1516728223.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:43.722Z,1516728223.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:44.119Z,1516728224.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:44.522Z,1516728224.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:44.896Z,1516728224.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:45.320Z,1516728225.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:45.703Z,1516728225.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:46.126Z,1516728226.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:46.533Z,1516728226.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:46.930Z,1516728226.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:47.297Z,1516728227.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:47.708Z,1516728227.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:48.104Z,1516728228.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:48.502Z,1516728228.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:48.906Z,1516728228.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:49.305Z,1516728229.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:49.718Z,1516728229.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:50.139Z,1516728230.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:50.511Z,1516728230.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:50.900Z,1516728230.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:51.304Z,1516728231.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:51.708Z,1516728231.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:52.121Z,1516728232.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:52.521Z,1516728232.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:52.920Z,1516728232.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:53.309Z,1516728233.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:53.708Z,1516728233.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:54.110Z,1516728234.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:54.505Z,1516728234.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:54.917Z,1516728234.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:55.317Z,1516728235.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:55.718Z,1516728235.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:56.110Z,1516728236.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:56.508Z,1516728236.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:56.916Z,1516728236.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:57.308Z,1516728237.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:57.705Z,1516728237.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:58.115Z,1516728238.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:58.525Z,1516728238.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:58.924Z,1516728238.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:59.313Z,1516728239.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:23:59.708Z,1516728239.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:00.107Z,1516728240.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:00.511Z,1516728240.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:00.909Z,1516728240.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:01.324Z,1516728241.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:01.722Z,1516728241.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:02.122Z,1516728242.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:02.511Z,1516728242.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:02.891Z,1516728242.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:03.321Z,1516728243.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:03.697Z,1516728243.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:04.122Z,1516728244.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:04.522Z,1516728244.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:04.932Z,1516728244.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:05.297Z,1516728245.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:05.703Z,1516728245.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:06.120Z,1516728246.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:06.509Z,1516728246.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:06.905Z,1516728246.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:07.305Z,1516728247.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:07.714Z,1516728247.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:08.107Z,1516728248.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:08.504Z,1516728248.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:08.903Z,1516728248.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:09.305Z,1516728249.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:09.703Z,1516728249.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:10.107Z,1516728250.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:10.509Z,1516728250.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:10.912Z,1516728250.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:11.302Z,1516728251.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:11.704Z,1516728251.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:12.112Z,1516728252.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:12.504Z,1516728252.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:12.902Z,1516728252.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:13.306Z,1516728253.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:13.712Z,1516728253.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:14.107Z,1516728254.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:14.499Z,1516728254.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:14.901Z,1516728254.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:15.317Z,1516728255.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:15.702Z,1516728255.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:16.107Z,1516728256.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:16.509Z,1516728256.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:16.931Z,1516728256.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:17.301Z,1516728257.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:17.701Z,1516728257.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:18.111Z,1516728258.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:18.531Z,1516728258.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:18.906Z,1516728258.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:19.312Z,1516728259.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:19.710Z,1516728259.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:20.129Z,1516728260.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:23.206Z,1516728263.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:23.344Z,1516728263.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:23.700Z,1516728263.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T17:24:23.721Z,1516728263.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:24.109Z,1516728264.109 [PNI_TCM](ERROR): CRC does not match. Expected:0x52734 got:0x24974 2018-01-23T17:24:24.144Z,1516728264.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:24.513Z,1516728264.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:24.922Z,1516728264.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:25.305Z,1516728265.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:25.705Z,1516728265.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:26.113Z,1516728266.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:26.521Z,1516728266.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:26.914Z,1516728266.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:27.304Z,1516728267.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:27.710Z,1516728267.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:28.113Z,1516728268.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:28.505Z,1516728268.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:28.910Z,1516728268.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:29.314Z,1516728269.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:29.742Z,1516728269.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:30.120Z,1516728270.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:30.497Z,1516728270.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:30.912Z,1516728270.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:31.316Z,1516728271.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:31.712Z,1516728271.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:32.121Z,1516728272.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:32.529Z,1516728272.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:32.933Z,1516728272.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:33.311Z,1516728273.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:33.708Z,1516728273.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:34.121Z,1516728274.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:34.492Z,1516728274.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:34.521Z,1516728274.521 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:24:34.938Z,1516728274.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:35.319Z,1516728275.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:35.729Z,1516728275.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:36.145Z,1516728276.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:36.526Z,1516728276.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:36.905Z,1516728276.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:37.306Z,1516728277.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:37.700Z,1516728277.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:38.109Z,1516728278.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:38.507Z,1516728278.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:38.908Z,1516728278.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:39.313Z,1516728279.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:39.701Z,1516728279.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:40.103Z,1516728280.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:40.519Z,1516728280.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:40.912Z,1516728280.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:41.317Z,1516728281.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:41.713Z,1516728281.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:42.119Z,1516728282.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:42.507Z,1516728282.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:42.907Z,1516728282.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:43.304Z,1516728283.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:43.707Z,1516728283.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:44.113Z,1516728284.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:44.514Z,1516728284.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:44.919Z,1516728284.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:45.307Z,1516728285.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:45.712Z,1516728285.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:46.116Z,1516728286.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:46.514Z,1516728286.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:46.926Z,1516728286.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:47.305Z,1516728287.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:47.710Z,1516728287.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:48.121Z,1516728288.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:48.521Z,1516728288.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:48.924Z,1516728288.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:49.313Z,1516728289.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:49.711Z,1516728289.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:50.122Z,1516728290.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:50.516Z,1516728290.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:50.914Z,1516728290.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:51.312Z,1516728291.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:51.714Z,1516728291.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:52.115Z,1516728292.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:52.518Z,1516728292.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:52.913Z,1516728292.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:53.308Z,1516728293.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:53.713Z,1516728293.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:54.118Z,1516728294.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:54.516Z,1516728294.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:54.916Z,1516728294.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:55.297Z,1516728295.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:55.697Z,1516728295.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:56.120Z,1516728296.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:56.523Z,1516728296.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:56.919Z,1516728296.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:57.320Z,1516728297.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:57.695Z,1516728297.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:58.106Z,1516728298.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:58.506Z,1516728298.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:58.908Z,1516728298.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:59.309Z,1516728299.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:24:59.705Z,1516728299.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:00.112Z,1516728300.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:00.506Z,1516728300.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:00.913Z,1516728300.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:01.301Z,1516728301.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:01.701Z,1516728301.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:02.117Z,1516728302.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:02.513Z,1516728302.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:02.913Z,1516728302.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:03.308Z,1516728303.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:03.701Z,1516728303.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:04.110Z,1516728304.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:04.513Z,1516728304.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:04.911Z,1516728304.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:05.303Z,1516728305.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:05.701Z,1516728305.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:06.111Z,1516728306.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:06.513Z,1516728306.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:06.910Z,1516728306.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:07.300Z,1516728307.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:07.701Z,1516728307.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:08.109Z,1516728308.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:08.513Z,1516728308.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:08.909Z,1516728308.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:09.308Z,1516728309.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:09.701Z,1516728309.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:10.109Z,1516728310.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:10.512Z,1516728310.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:10.911Z,1516728310.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:11.302Z,1516728311.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:11.703Z,1516728311.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:12.110Z,1516728312.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:12.513Z,1516728312.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:12.910Z,1516728312.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:13.301Z,1516728313.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:13.701Z,1516728313.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:14.109Z,1516728314.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:14.514Z,1516728314.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:14.917Z,1516728314.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:15.305Z,1516728315.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:15.703Z,1516728315.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:16.117Z,1516728316.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:16.521Z,1516728316.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:16.916Z,1516728316.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:17.301Z,1516728317.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:17.709Z,1516728317.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:18.112Z,1516728318.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:18.515Z,1516728318.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:18.914Z,1516728318.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:19.317Z,1516728319.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:19.706Z,1516728319.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:20.105Z,1516728320.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:20.516Z,1516728320.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:23.603Z,1516728323.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:23.752Z,1516728323.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:24.074Z,1516728324.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:24.501Z,1516728324.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:24.869Z,1516728324.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:25.268Z,1516728325.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:25.669Z,1516728325.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:26.073Z,1516728326.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:26.477Z,1516728326.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:26.874Z,1516728326.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:26.876Z,1516728326.876 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:26.876Z,1516728326.876 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 282 2018-01-23T17:25:26.876Z,1516728326.876 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:25:26.888Z,1516728326.888 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:25:27.289Z,1516728327.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:27.318Z,1516728327.318 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:25:27.318Z,1516728327.318 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 282 2018-01-23T17:25:27.669Z,1516728327.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:27.670Z,1516728327.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:25:27.671Z,1516728327.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:25:27.672Z,1516728327.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:25:28.080Z,1516728328.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:28.473Z,1516728328.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:28.873Z,1516728328.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:29.276Z,1516728329.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:29.689Z,1516728329.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:30.078Z,1516728330.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:30.477Z,1516728330.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:30.875Z,1516728330.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:31.277Z,1516728331.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:31.689Z,1516728331.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:32.083Z,1516728332.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:32.480Z,1516728332.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:32.886Z,1516728332.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:33.280Z,1516728333.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:33.659Z,1516728333.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:34.059Z,1516728334.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:34.469Z,1516728334.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:34.864Z,1516728334.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:35.289Z,1516728335.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:35.689Z,1516728335.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:36.089Z,1516728336.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:36.495Z,1516728336.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:36.889Z,1516728336.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:36.889Z,1516728336.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 282 2018-01-23T17:25:36.889Z,1516728336.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:25:36.895Z,1516728336.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:36.899Z,1516728336.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 282 2018-01-23T17:25:36.899Z,1516728336.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:25:36.912Z,1516728336.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:25:36.912Z,1516728336.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:25:37.292Z,1516728337.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:25:37.292Z,1516728337.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 282 2018-01-23T17:25:37.292Z,1516728337.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:25:37.292Z,1516728337.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 282 2018-01-23T17:25:37.687Z,1516728337.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:25:37.687Z,1516728337.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:25:37.688Z,1516728337.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:25:37.688Z,1516728337.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:25:37.689Z,1516728337.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:25:37.689Z,1516728337.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:25:38.076Z,1516728338.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:25:38.077Z,1516728338.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:38.470Z,1516728338.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:25:38.471Z,1516728338.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:38.879Z,1516728338.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:25:38.880Z,1516728338.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:39.276Z,1516728339.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:25:39.277Z,1516728339.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:39.667Z,1516728339.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:25:39.668Z,1516728339.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:40.068Z,1516728340.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:25:40.069Z,1516728340.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:40.475Z,1516728340.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:25:40.476Z,1516728340.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:40.870Z,1516728340.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:25:40.876Z,1516728340.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:41.279Z,1516728341.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:25:41.280Z,1516728341.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:41.681Z,1516728341.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:25:41.682Z,1516728341.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:42.084Z,1516728342.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:25:42.085Z,1516728342.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:42.451Z,1516728342.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:42.483Z,1516728342.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:25:42.484Z,1516728342.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:42.856Z,1516728342.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:42.871Z,1516728342.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:25:42.872Z,1516728342.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:43.251Z,1516728343.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:43.277Z,1516728343.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:25:43.278Z,1516728343.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:43.672Z,1516728343.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:25:43.672Z,1516728343.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:44.072Z,1516728344.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:25:44.073Z,1516728344.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:44.477Z,1516728344.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:25:44.478Z,1516728344.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:44.882Z,1516728344.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:25:44.883Z,1516728344.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:45.277Z,1516728345.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:25:45.278Z,1516728345.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:45.675Z,1516728345.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:25:45.676Z,1516728345.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:46.078Z,1516728346.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:25:46.079Z,1516728346.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:46.473Z,1516728346.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:25:46.474Z,1516728346.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:46.873Z,1516728346.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:25:46.874Z,1516728346.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:47.277Z,1516728347.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:25:47.278Z,1516728347.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:47.681Z,1516728347.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:25:47.682Z,1516728347.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:48.080Z,1516728348.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:25:48.081Z,1516728348.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:48.478Z,1516728348.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:25:48.479Z,1516728348.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:48.876Z,1516728348.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:25:48.877Z,1516728348.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:49.276Z,1516728349.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:25:49.277Z,1516728349.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:49.650Z,1516728349.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:49.683Z,1516728349.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:25:49.684Z,1516728349.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:50.048Z,1516728350.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:50.080Z,1516728350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:25:50.081Z,1516728350.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:50.455Z,1516728350.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:50.490Z,1516728350.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:25:50.491Z,1516728350.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:50.869Z,1516728350.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:50.884Z,1516728350.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:25:50.885Z,1516728350.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:51.255Z,1516728351.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:51.290Z,1516728351.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:25:51.291Z,1516728351.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:51.644Z,1516728351.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:51.681Z,1516728351.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:25:51.681Z,1516728351.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:52.045Z,1516728352.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:52.083Z,1516728352.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:25:52.084Z,1516728352.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:52.450Z,1516728352.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:52.480Z,1516728352.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:25:52.481Z,1516728352.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:52.845Z,1516728352.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:52.880Z,1516728352.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:25:52.881Z,1516728352.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:53.256Z,1516728353.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:53.297Z,1516728353.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:25:53.298Z,1516728353.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:53.656Z,1516728353.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:53.689Z,1516728353.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:25:53.690Z,1516728353.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:54.056Z,1516728354.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:54.092Z,1516728354.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:25:54.093Z,1516728354.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:54.444Z,1516728354.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:54.460Z,1516728354.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:25:54.461Z,1516728354.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:54.844Z,1516728354.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:54.861Z,1516728354.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:25:54.862Z,1516728354.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:55.256Z,1516728355.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:55.291Z,1516728355.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:25:55.292Z,1516728355.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:55.650Z,1516728355.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:55.665Z,1516728355.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:25:55.666Z,1516728355.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:56.056Z,1516728356.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:56.073Z,1516728356.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:25:56.074Z,1516728356.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:56.463Z,1516728356.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:56.478Z,1516728356.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:25:56.495Z,1516728356.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:56.859Z,1516728356.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:56.873Z,1516728356.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:25:56.874Z,1516728356.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:57.256Z,1516728357.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:57.270Z,1516728357.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:57.652Z,1516728357.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:57.667Z,1516728357.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:58.052Z,1516728358.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:58.072Z,1516728358.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:58.452Z,1516728358.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:58.467Z,1516728358.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:58.850Z,1516728358.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:58.869Z,1516728358.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:59.263Z,1516728359.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:59.278Z,1516728359.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:25:59.660Z,1516728359.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:25:59.687Z,1516728359.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:00.063Z,1516728360.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:00.078Z,1516728360.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:00.451Z,1516728360.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:00.477Z,1516728360.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:00.842Z,1516728360.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:00.874Z,1516728360.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:01.256Z,1516728361.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:01.275Z,1516728361.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:01.645Z,1516728361.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:01.682Z,1516728361.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:02.056Z,1516728362.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:02.075Z,1516728362.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:02.467Z,1516728362.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:02.482Z,1516728362.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:02.868Z,1516728362.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:02.883Z,1516728362.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:03.260Z,1516728363.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:03.282Z,1516728363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:03.645Z,1516728363.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:03.684Z,1516728363.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:04.045Z,1516728364.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:04.081Z,1516728364.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:04.445Z,1516728364.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:04.482Z,1516728364.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:04.844Z,1516728364.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:04.877Z,1516728364.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:05.264Z,1516728365.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:05.284Z,1516728365.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:05.662Z,1516728365.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:05.685Z,1516728365.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:06.055Z,1516728366.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:06.089Z,1516728366.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:06.452Z,1516728366.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:06.481Z,1516728366.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:06.842Z,1516728366.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:06.857Z,1516728366.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:07.246Z,1516728367.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:07.261Z,1516728367.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:07.657Z,1516728367.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:07.672Z,1516728367.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:08.052Z,1516728368.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:08.073Z,1516728368.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:08.467Z,1516728368.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:08.500Z,1516728368.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:08.863Z,1516728368.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:08.878Z,1516728368.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:09.255Z,1516728369.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:09.270Z,1516728369.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:09.652Z,1516728369.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:09.667Z,1516728369.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:10.052Z,1516728370.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:10.066Z,1516728370.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:10.452Z,1516728370.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:10.467Z,1516728370.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:10.850Z,1516728370.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:10.873Z,1516728370.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:11.263Z,1516728371.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:11.278Z,1516728371.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:11.661Z,1516728371.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:11.694Z,1516728371.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:12.060Z,1516728372.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:12.083Z,1516728372.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:12.454Z,1516728372.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:12.476Z,1516728372.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:12.842Z,1516728372.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:12.873Z,1516728372.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:13.248Z,1516728373.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:13.274Z,1516728373.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:13.645Z,1516728373.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:13.673Z,1516728373.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:14.044Z,1516728374.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:14.070Z,1516728374.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:14.463Z,1516728374.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:14.478Z,1516728374.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:14.867Z,1516728374.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:14.888Z,1516728374.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:15.260Z,1516728375.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:15.291Z,1516728375.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:15.661Z,1516728375.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:15.681Z,1516728375.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:16.045Z,1516728376.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:16.078Z,1516728376.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:16.449Z,1516728376.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:16.476Z,1516728376.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:16.845Z,1516728376.845 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:16.877Z,1516728376.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:17.272Z,1516728377.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:17.287Z,1516728377.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:17.660Z,1516728377.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:17.682Z,1516728377.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:18.059Z,1516728378.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:18.082Z,1516728378.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:18.445Z,1516728378.445 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:18.478Z,1516728378.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:18.842Z,1516728378.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:18.866Z,1516728378.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:19.244Z,1516728379.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:19.281Z,1516728379.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:19.645Z,1516728379.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:19.685Z,1516728379.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:20.048Z,1516728380.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:20.082Z,1516728380.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:20.455Z,1516728380.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:20.491Z,1516728380.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:20.870Z,1516728380.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:20.888Z,1516728380.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:23.974Z,1516728383.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:23.989Z,1516728383.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:24.093Z,1516728384.093 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:24.129Z,1516728384.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:24.440Z,1516728384.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:24.455Z,1516728384.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:24.859Z,1516728384.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:25.282Z,1516728385.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:25.666Z,1516728385.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:26.069Z,1516728386.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:26.455Z,1516728386.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:26.855Z,1516728386.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:27.257Z,1516728387.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:27.657Z,1516728387.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:28.055Z,1516728388.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:28.448Z,1516728388.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:28.468Z,1516728388.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:28.847Z,1516728388.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:28.862Z,1516728388.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:29.259Z,1516728389.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:29.274Z,1516728389.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:29.643Z,1516728389.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:29.658Z,1516728389.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:30.041Z,1516728390.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:30.056Z,1516728390.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:30.463Z,1516728390.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:30.500Z,1516728390.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:30.886Z,1516728390.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:30.917Z,1516728390.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:31.253Z,1516728391.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:31.280Z,1516728391.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:31.662Z,1516728391.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:26:31.690Z,1516728391.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:32.114Z,1516728392.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:32.489Z,1516728392.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:32.876Z,1516728392.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:33.364Z,1516728393.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:33.689Z,1516728393.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:34.102Z,1516728394.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:34.496Z,1516728394.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:34.861Z,1516728394.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:35.332Z,1516728395.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:35.720Z,1516728395.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:36.104Z,1516728396.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:36.477Z,1516728396.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:36.899Z,1516728396.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:37.277Z,1516728397.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:37.725Z,1516728397.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:38.109Z,1516728398.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:38.492Z,1516728398.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:38.913Z,1516728398.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:39.302Z,1516728399.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:39.717Z,1516728399.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:40.109Z,1516728400.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:40.522Z,1516728400.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:40.872Z,1516728400.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:41.280Z,1516728401.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:41.715Z,1516728401.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:42.085Z,1516728402.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:42.473Z,1516728402.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:42.900Z,1516728402.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:43.277Z,1516728403.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:43.685Z,1516728403.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:44.089Z,1516728404.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:44.474Z,1516728404.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:44.873Z,1516728404.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:45.314Z,1516728405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:45.685Z,1516728405.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:46.092Z,1516728406.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:46.484Z,1516728406.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:46.857Z,1516728406.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:47.288Z,1516728407.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:47.708Z,1516728407.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:48.091Z,1516728408.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:48.497Z,1516728408.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:48.869Z,1516728408.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:49.273Z,1516728409.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:49.715Z,1516728409.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:50.106Z,1516728410.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:50.509Z,1516728410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:50.876Z,1516728410.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:51.268Z,1516728411.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:51.670Z,1516728411.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:52.074Z,1516728412.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:52.514Z,1516728412.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:52.853Z,1516728412.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:53.288Z,1516728413.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:53.675Z,1516728413.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:54.077Z,1516728414.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:54.448Z,1516728414.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:54.848Z,1516728414.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:55.262Z,1516728415.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:55.662Z,1516728415.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:56.062Z,1516728416.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:56.446Z,1516728416.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:56.850Z,1516728416.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:57.276Z,1516728417.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:57.679Z,1516728417.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:58.083Z,1516728418.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:58.481Z,1516728418.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:58.853Z,1516728418.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:59.252Z,1516728419.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:26:59.652Z,1516728419.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:00.057Z,1516728420.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:00.462Z,1516728420.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:00.862Z,1516728420.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:01.258Z,1516728421.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:01.665Z,1516728421.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:02.056Z,1516728422.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:02.454Z,1516728422.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:02.856Z,1516728422.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:03.255Z,1516728423.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:03.659Z,1516728423.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:04.062Z,1516728424.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:04.465Z,1516728424.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:04.852Z,1516728424.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:05.254Z,1516728425.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:05.656Z,1516728425.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:06.065Z,1516728426.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:06.465Z,1516728426.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:06.865Z,1516728426.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:07.266Z,1516728427.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:07.654Z,1516728427.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:08.056Z,1516728428.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:08.456Z,1516728428.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:08.865Z,1516728428.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:09.256Z,1516728429.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:09.677Z,1516728429.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:10.077Z,1516728430.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:10.470Z,1516728430.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:10.857Z,1516728430.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:11.273Z,1516728431.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:11.662Z,1516728431.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:12.060Z,1516728432.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:12.466Z,1516728432.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:12.870Z,1516728432.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:13.274Z,1516728433.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:13.665Z,1516728433.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:14.061Z,1516728434.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:14.460Z,1516728434.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:14.859Z,1516728434.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:15.261Z,1516728435.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:15.666Z,1516728435.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:16.070Z,1516728436.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:16.474Z,1516728436.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:16.862Z,1516728436.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:17.260Z,1516728437.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:17.673Z,1516728437.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:18.067Z,1516728438.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:18.466Z,1516728438.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:18.871Z,1516728438.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:19.269Z,1516728439.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:19.272Z,1516728439.272 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:22:18.9Z 2018-01-23T17:27:19.273Z,1516728439.273 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:27:19.273Z,1516728439.273 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:27:19.664Z,1516728439.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:20.183Z,1516728440.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:20.472Z,1516728440.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:23.672Z,1516728443.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:23.732Z,1516728443.732 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0332.lzma 2018-01-23T17:27:23.797Z,1516728443.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:24.169Z,1516728444.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:24.498Z,1516728444.498 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0332.lzma.bak 2018-01-23T17:27:24.498Z,1516728444.498 [DataOverHttps](INFO): SBD MOMSN=7756185 2018-01-23T17:27:24.571Z,1516728444.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:25.213Z,1516728445.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:25.359Z,1516728445.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:28.438Z,1516728448.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:28.570Z,1516728448.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:28.945Z,1516728448.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:29.354Z,1516728449.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:29.742Z,1516728449.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:30.136Z,1516728450.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:33.237Z,1516728453.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:33.328Z,1516728453.328 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0333.lzma 2018-01-23T17:27:33.383Z,1516728453.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:33.727Z,1516728453.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:34.069Z,1516728454.069 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0333.lzma.bak 2018-01-23T17:27:34.069Z,1516728454.069 [DataOverHttps](INFO): SBD MOMSN=7756187 2018-01-23T17:27:34.141Z,1516728454.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:34.754Z,1516728454.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:34.757Z,1516728454.757 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:27:34.757Z,1516728454.757 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:27:34.757Z,1516728454.757 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:27:34.903Z,1516728454.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:38.048Z,1516728458.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:38.189Z,1516728458.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:38.541Z,1516728458.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:38.942Z,1516728458.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:39.338Z,1516728459.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:39.735Z,1516728459.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:40.123Z,1516728460.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:40.523Z,1516728460.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:40.924Z,1516728460.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:41.334Z,1516728461.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:41.758Z,1516728461.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:42.130Z,1516728462.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:42.526Z,1516728462.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:42.926Z,1516728462.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:43.337Z,1516728463.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:43.730Z,1516728463.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:44.137Z,1516728464.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:44.529Z,1516728464.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:44.925Z,1516728464.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:45.328Z,1516728465.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:45.733Z,1516728465.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:46.128Z,1516728466.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:46.530Z,1516728466.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:46.922Z,1516728466.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:47.323Z,1516728467.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:47.727Z,1516728467.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:48.126Z,1516728468.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:48.534Z,1516728468.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:48.941Z,1516728468.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:49.341Z,1516728469.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:49.727Z,1516728469.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:50.127Z,1516728470.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:50.526Z,1516728470.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:50.928Z,1516728470.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:51.327Z,1516728471.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:51.741Z,1516728471.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:52.138Z,1516728472.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:52.537Z,1516728472.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:52.925Z,1516728472.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:53.329Z,1516728473.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:53.730Z,1516728473.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:54.137Z,1516728474.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:54.539Z,1516728474.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:54.937Z,1516728474.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:55.333Z,1516728475.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:55.726Z,1516728475.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:56.126Z,1516728476.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:56.537Z,1516728476.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:56.925Z,1516728476.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:57.330Z,1516728477.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:57.735Z,1516728477.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:58.144Z,1516728478.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:58.536Z,1516728478.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:58.929Z,1516728478.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:59.334Z,1516728479.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:27:59.725Z,1516728479.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:00.132Z,1516728480.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:00.542Z,1516728480.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:00.938Z,1516728480.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:01.334Z,1516728481.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:01.736Z,1516728481.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:02.133Z,1516728482.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:02.541Z,1516728482.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:02.929Z,1516728482.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:03.332Z,1516728483.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:03.745Z,1516728483.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:04.138Z,1516728484.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:04.535Z,1516728484.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:04.933Z,1516728484.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:05.332Z,1516728485.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:05.731Z,1516728485.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:06.133Z,1516728486.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:06.540Z,1516728486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:06.944Z,1516728486.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:07.341Z,1516728487.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:07.731Z,1516728487.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:08.137Z,1516728488.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:08.541Z,1516728488.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:08.923Z,1516728488.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:09.321Z,1516728489.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:09.750Z,1516728489.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:10.157Z,1516728490.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:10.526Z,1516728490.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:10.923Z,1516728490.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:11.330Z,1516728491.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:11.724Z,1516728491.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:12.128Z,1516728492.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:12.556Z,1516728492.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:12.926Z,1516728492.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:13.402Z,1516728493.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:13.724Z,1516728493.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:14.121Z,1516728494.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:14.522Z,1516728494.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:14.923Z,1516728494.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:15.358Z,1516728495.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:15.751Z,1516728495.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:16.155Z,1516728496.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:16.526Z,1516728496.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:16.924Z,1516728496.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:17.328Z,1516728497.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:17.725Z,1516728497.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:18.125Z,1516728498.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:18.538Z,1516728498.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:18.930Z,1516728498.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:19.358Z,1516728499.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:19.728Z,1516728499.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:20.124Z,1516728500.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:20.533Z,1516728500.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:20.930Z,1516728500.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:21.323Z,1516728501.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:21.729Z,1516728501.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:22.142Z,1516728502.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:22.537Z,1516728502.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:22.929Z,1516728502.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:23.328Z,1516728503.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:23.726Z,1516728503.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:24.129Z,1516728504.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:24.530Z,1516728504.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:24.934Z,1516728504.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:25.330Z,1516728505.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:25.727Z,1516728505.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:26.127Z,1516728506.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:26.523Z,1516728506.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:26.932Z,1516728506.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:27.325Z,1516728507.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:27.742Z,1516728507.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:27.764Z,1516728507.764 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:27.765Z,1516728507.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 283 2018-01-23T17:28:27.765Z,1516728507.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:28:27.794Z,1516728507.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:28:28.137Z,1516728508.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:28.165Z,1516728508.165 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:28:28.165Z,1516728508.165 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 283 2018-01-23T17:28:28.535Z,1516728508.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:28.536Z,1516728508.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:28:28.537Z,1516728508.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:28:28.537Z,1516728508.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:28:28.936Z,1516728508.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:29.337Z,1516728509.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:29.728Z,1516728509.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:30.126Z,1516728510.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:30.538Z,1516728510.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:30.937Z,1516728510.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:31.336Z,1516728511.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:31.747Z,1516728511.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:32.131Z,1516728512.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:32.541Z,1516728512.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:32.929Z,1516728512.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:33.337Z,1516728513.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:33.738Z,1516728513.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:34.142Z,1516728514.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:34.542Z,1516728514.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:34.937Z,1516728514.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:35.339Z,1516728515.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:38.431Z,1516728518.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:38.431Z,1516728518.431 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 283 2018-01-23T17:28:38.431Z,1516728518.431 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:28:38.433Z,1516728518.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:38.433Z,1516728518.433 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 283 2018-01-23T17:28:38.433Z,1516728518.433 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:28:38.446Z,1516728518.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:28:38.447Z,1516728518.447 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:28:38.581Z,1516728518.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:28:38.581Z,1516728518.581 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 283 2018-01-23T17:28:38.581Z,1516728518.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:28:38.581Z,1516728518.581 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 283 2018-01-23T17:28:38.910Z,1516728518.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:28:38.910Z,1516728518.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:28:38.915Z,1516728518.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:28:38.915Z,1516728518.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:28:38.916Z,1516728518.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:28:38.916Z,1516728518.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:28:39.317Z,1516728519.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T17:28:39.318Z,1516728519.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:39.724Z,1516728519.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T17:28:39.725Z,1516728519.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:40.110Z,1516728520.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T17:28:40.111Z,1516728520.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:40.515Z,1516728520.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T17:28:40.516Z,1516728520.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:40.908Z,1516728520.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T17:28:40.909Z,1516728520.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:41.321Z,1516728521.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T17:28:41.322Z,1516728521.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:41.718Z,1516728521.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T17:28:41.719Z,1516728521.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:42.119Z,1516728522.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T17:28:42.120Z,1516728522.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:42.518Z,1516728522.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T17:28:42.519Z,1516728522.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:42.915Z,1516728522.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T17:28:42.917Z,1516728522.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:43.312Z,1516728523.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T17:28:43.313Z,1516728523.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:43.705Z,1516728523.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T17:28:43.706Z,1516728523.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:44.125Z,1516728524.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T17:28:44.126Z,1516728524.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:44.520Z,1516728524.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T17:28:44.521Z,1516728524.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:44.929Z,1516728524.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T17:28:44.930Z,1516728524.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:45.326Z,1516728525.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T17:28:45.327Z,1516728525.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:45.717Z,1516728525.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T17:28:45.718Z,1516728525.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:46.112Z,1516728526.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T17:28:46.113Z,1516728526.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:46.517Z,1516728526.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T17:28:46.518Z,1516728526.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:46.913Z,1516728526.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T17:28:46.914Z,1516728526.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:47.294Z,1516728527.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T17:28:47.311Z,1516728527.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:47.727Z,1516728527.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T17:28:47.728Z,1516728527.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:48.122Z,1516728528.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T17:28:48.124Z,1516728528.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:48.514Z,1516728528.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T17:28:48.519Z,1516728528.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:48.902Z,1516728528.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T17:28:48.929Z,1516728528.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:49.289Z,1516728529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T17:28:49.290Z,1516728529.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:49.700Z,1516728529.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T17:28:49.701Z,1516728529.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:50.121Z,1516728530.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T17:28:50.122Z,1516728530.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:50.509Z,1516728530.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T17:28:50.510Z,1516728530.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:50.934Z,1516728530.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T17:28:50.935Z,1516728530.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:51.308Z,1516728531.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T17:28:51.309Z,1516728531.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:51.715Z,1516728531.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T17:28:51.716Z,1516728531.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:52.106Z,1516728532.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T17:28:52.107Z,1516728532.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:52.499Z,1516728532.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T17:28:52.500Z,1516728532.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:52.901Z,1516728532.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T17:28:52.902Z,1516728532.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:53.311Z,1516728533.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T17:28:53.313Z,1516728533.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:53.713Z,1516728533.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T17:28:53.714Z,1516728533.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:54.112Z,1516728534.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T17:28:54.113Z,1516728534.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:54.510Z,1516728534.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T17:28:54.511Z,1516728534.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:54.904Z,1516728534.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T17:28:54.905Z,1516728534.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:55.308Z,1516728535.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T17:28:55.309Z,1516728535.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:55.702Z,1516728535.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T17:28:55.704Z,1516728535.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:56.101Z,1516728536.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T17:28:56.101Z,1516728536.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:56.512Z,1516728536.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T17:28:56.514Z,1516728536.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:56.916Z,1516728536.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T17:28:56.917Z,1516728536.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:57.310Z,1516728537.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T17:28:57.311Z,1516728537.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:57.702Z,1516728537.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T17:28:57.703Z,1516728537.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:58.106Z,1516728538.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T17:28:58.107Z,1516728538.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:58.501Z,1516728538.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:58.903Z,1516728538.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:59.310Z,1516728539.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:28:59.718Z,1516728539.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:00.113Z,1516728540.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:00.511Z,1516728540.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:00.900Z,1516728540.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:01.309Z,1516728541.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:01.707Z,1516728541.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:02.104Z,1516728542.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:02.515Z,1516728542.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:02.921Z,1516728542.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:03.316Z,1516728543.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:03.702Z,1516728543.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:04.107Z,1516728544.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:04.518Z,1516728544.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:04.925Z,1516728544.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:05.314Z,1516728545.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:05.712Z,1516728545.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:06.105Z,1516728546.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:06.512Z,1516728546.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:06.899Z,1516728546.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:06.914Z,1516728546.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:07.292Z,1516728547.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:07.323Z,1516728547.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:07.678Z,1516728547.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:07.709Z,1516728547.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:08.115Z,1516728548.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:08.519Z,1516728548.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:08.923Z,1516728548.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:09.317Z,1516728549.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:09.692Z,1516728549.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:10.097Z,1516728550.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:10.525Z,1516728550.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:10.922Z,1516728550.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:11.321Z,1516728551.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:11.715Z,1516728551.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:12.101Z,1516728552.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:12.503Z,1516728552.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:12.906Z,1516728552.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:13.306Z,1516728553.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:13.707Z,1516728553.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:14.104Z,1516728554.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:14.521Z,1516728554.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:14.921Z,1516728554.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:15.311Z,1516728555.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:15.708Z,1516728555.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:16.109Z,1516728556.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:16.529Z,1516728556.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:16.918Z,1516728556.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:17.314Z,1516728557.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:17.714Z,1516728557.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:18.113Z,1516728558.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:18.521Z,1516728558.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:18.915Z,1516728558.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:19.313Z,1516728559.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:19.711Z,1516728559.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:20.113Z,1516728560.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:20.515Z,1516728560.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:20.914Z,1516728560.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:21.296Z,1516728561.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:21.325Z,1516728561.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:21.682Z,1516728561.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:21.708Z,1516728561.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:22.076Z,1516728562.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:22.109Z,1516728562.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:22.496Z,1516728562.496 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:22.512Z,1516728562.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:22.891Z,1516728562.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:22.914Z,1516728562.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:23.291Z,1516728563.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:23.323Z,1516728563.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:23.677Z,1516728563.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:23.714Z,1516728563.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:24.077Z,1516728564.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:24.109Z,1516728564.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:24.491Z,1516728564.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:24.522Z,1516728564.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:24.900Z,1516728564.900 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:24.914Z,1516728564.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:25.291Z,1516728565.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:25.313Z,1516728565.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:25.677Z,1516728565.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:25.709Z,1516728565.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:26.076Z,1516728566.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:26.114Z,1516728566.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:26.491Z,1516728566.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:26.518Z,1516728566.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:26.898Z,1516728566.898 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:26.921Z,1516728566.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:27.296Z,1516728567.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:27.311Z,1516728567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:27.681Z,1516728567.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:27.701Z,1516728567.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:28.089Z,1516728568.089 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:28.103Z,1516728568.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:28.491Z,1516728568.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:28.506Z,1516728568.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:28.887Z,1516728568.887 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:28.902Z,1516728568.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:29.287Z,1516728569.287 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:29.302Z,1516728569.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:29.684Z,1516728569.684 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:29.699Z,1516728569.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:30.084Z,1516728570.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:30.099Z,1516728570.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:30.488Z,1516728570.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:30.503Z,1516728570.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:30.890Z,1516728570.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:30.905Z,1516728570.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:31.288Z,1516728571.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:31.309Z,1516728571.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:31.687Z,1516728571.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:31.701Z,1516728571.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:32.099Z,1516728572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:32.502Z,1516728572.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:32.906Z,1516728572.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:33.299Z,1516728573.299 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:33.314Z,1516728573.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:33.687Z,1516728573.687 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:33.702Z,1516728573.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:34.082Z,1516728574.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:34.105Z,1516728574.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:34.499Z,1516728574.499 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:34.534Z,1516728574.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:34.888Z,1516728574.888 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:34.902Z,1516728574.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:35.288Z,1516728575.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:35.309Z,1516728575.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:35.688Z,1516728575.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:35.714Z,1516728575.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:38.782Z,1516728578.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:38.805Z,1516728578.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:38.912Z,1516728578.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:38.960Z,1516728578.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:39.295Z,1516728579.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:39.310Z,1516728579.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:39.696Z,1516728579.696 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:39.711Z,1516728579.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:40.084Z,1516728580.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:40.102Z,1516728580.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:40.486Z,1516728580.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:40.501Z,1516728580.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:40.880Z,1516728580.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:40.905Z,1516728580.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:41.280Z,1516728581.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:29:41.302Z,1516728581.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:41.711Z,1516728581.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:42.113Z,1516728582.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:42.510Z,1516728582.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:42.904Z,1516728582.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:43.301Z,1516728583.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:43.701Z,1516728583.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:44.117Z,1516728584.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:44.509Z,1516728584.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:44.914Z,1516728584.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:45.319Z,1516728585.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:45.710Z,1516728585.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:46.107Z,1516728586.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:46.513Z,1516728586.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:46.908Z,1516728586.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:47.313Z,1516728587.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:47.729Z,1516728587.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:48.117Z,1516728588.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:48.519Z,1516728588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:48.897Z,1516728588.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:49.321Z,1516728589.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:49.701Z,1516728589.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:50.101Z,1516728590.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:50.505Z,1516728590.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:50.909Z,1516728590.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:51.314Z,1516728591.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:51.705Z,1516728591.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:52.100Z,1516728592.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:52.501Z,1516728592.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:52.902Z,1516728592.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:53.299Z,1516728593.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:53.713Z,1516728593.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:54.109Z,1516728594.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:54.510Z,1516728594.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:54.900Z,1516728594.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:55.308Z,1516728595.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:55.701Z,1516728595.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:56.101Z,1516728596.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:56.505Z,1516728596.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:56.909Z,1516728596.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:57.309Z,1516728597.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:57.713Z,1516728597.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:58.100Z,1516728598.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:58.501Z,1516728598.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:58.902Z,1516728598.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:59.301Z,1516728599.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:29:59.710Z,1516728599.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:00.116Z,1516728600.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:00.513Z,1516728600.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:00.900Z,1516728600.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:01.309Z,1516728601.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:01.700Z,1516728601.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:02.086Z,1516728602.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:30:02.101Z,1516728602.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:02.482Z,1516728602.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:30:02.505Z,1516728602.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:02.895Z,1516728602.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:30:02.910Z,1516728602.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:03.309Z,1516728603.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:03.709Z,1516728603.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:04.099Z,1516728604.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:04.509Z,1516728604.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:04.901Z,1516728604.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:05.305Z,1516728605.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:05.709Z,1516728605.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:06.109Z,1516728606.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:06.509Z,1516728606.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:06.904Z,1516728606.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:07.304Z,1516728607.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:07.704Z,1516728607.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:08.100Z,1516728608.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:08.509Z,1516728608.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:08.913Z,1516728608.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:09.317Z,1516728609.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:09.709Z,1516728609.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:10.107Z,1516728610.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:10.511Z,1516728610.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:10.904Z,1516728610.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:11.301Z,1516728611.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:11.711Z,1516728611.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:12.114Z,1516728612.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:12.514Z,1516728612.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:12.908Z,1516728612.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:13.305Z,1516728613.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:13.708Z,1516728613.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:14.117Z,1516728614.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:14.502Z,1516728614.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:14.925Z,1516728614.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:15.319Z,1516728615.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:15.714Z,1516728615.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:16.108Z,1516728616.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:16.511Z,1516728616.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:16.907Z,1516728616.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:17.308Z,1516728617.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:17.718Z,1516728617.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:18.119Z,1516728618.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:18.524Z,1516728618.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:18.921Z,1516728618.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:19.319Z,1516728619.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:19.717Z,1516728619.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:20.096Z,1516728620.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:20.497Z,1516728620.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:20.922Z,1516728620.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:21.322Z,1516728621.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:21.720Z,1516728621.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:22.104Z,1516728622.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:22.500Z,1516728622.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:22.901Z,1516728622.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:23.305Z,1516728623.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:23.706Z,1516728623.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:24.110Z,1516728624.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:24.506Z,1516728624.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:24.901Z,1516728624.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:25.301Z,1516728625.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:25.702Z,1516728625.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:26.102Z,1516728626.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:26.500Z,1516728626.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:26.913Z,1516728626.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:27.309Z,1516728627.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:27.706Z,1516728627.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:28.101Z,1516728628.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:28.502Z,1516728628.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:28.902Z,1516728628.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:29.300Z,1516728629.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:29.712Z,1516728629.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:30.107Z,1516728630.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:30.513Z,1516728630.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:30.905Z,1516728630.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:31.299Z,1516728631.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:31.708Z,1516728631.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:32.101Z,1516728632.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:32.498Z,1516728632.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:32.903Z,1516728632.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:33.306Z,1516728633.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:33.705Z,1516728633.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:34.099Z,1516728634.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:34.504Z,1516728634.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:34.901Z,1516728634.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:35.301Z,1516728635.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:35.706Z,1516728635.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:36.113Z,1516728636.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:39.214Z,1516728639.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:39.349Z,1516728639.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:39.729Z,1516728639.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:40.125Z,1516728640.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:40.519Z,1516728640.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:40.929Z,1516728640.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:41.326Z,1516728641.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:41.725Z,1516728641.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:42.118Z,1516728642.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:42.524Z,1516728642.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:42.924Z,1516728642.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:43.319Z,1516728643.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:43.736Z,1516728643.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:44.130Z,1516728644.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:44.529Z,1516728644.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:44.920Z,1516728644.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:45.319Z,1516728645.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:45.722Z,1516728645.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:46.121Z,1516728646.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:46.529Z,1516728646.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:46.929Z,1516728646.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:47.333Z,1516728647.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:47.732Z,1516728647.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:48.125Z,1516728648.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:48.525Z,1516728648.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:48.927Z,1516728648.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:49.327Z,1516728649.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:49.734Z,1516728649.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:50.134Z,1516728650.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:50.530Z,1516728650.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:50.927Z,1516728650.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:51.321Z,1516728651.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:51.729Z,1516728651.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:52.129Z,1516728652.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:52.517Z,1516728652.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:52.941Z,1516728652.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:53.344Z,1516728653.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:53.734Z,1516728653.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:54.131Z,1516728654.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:54.524Z,1516728654.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:54.935Z,1516728654.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:55.335Z,1516728655.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:55.749Z,1516728655.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:56.132Z,1516728656.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:56.541Z,1516728656.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:56.937Z,1516728656.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:57.310Z,1516728657.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:57.744Z,1516728657.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:58.141Z,1516728658.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:58.525Z,1516728658.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:58.941Z,1516728658.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:59.348Z,1516728659.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:30:59.749Z,1516728659.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:00.127Z,1516728660.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:00.525Z,1516728660.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:00.918Z,1516728660.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:01.320Z,1516728661.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:01.723Z,1516728661.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:02.126Z,1516728662.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:02.522Z,1516728662.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:02.921Z,1516728662.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:03.318Z,1516728663.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:03.718Z,1516728663.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:04.133Z,1516728664.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:04.525Z,1516728664.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:04.933Z,1516728664.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:05.330Z,1516728665.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:05.733Z,1516728665.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:06.129Z,1516728666.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:06.540Z,1516728666.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:06.922Z,1516728666.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:07.331Z,1516728667.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:07.731Z,1516728667.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:08.133Z,1516728668.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:08.534Z,1516728668.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:08.926Z,1516728668.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:09.322Z,1516728669.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:09.731Z,1516728669.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:10.132Z,1516728670.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:10.528Z,1516728670.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:10.936Z,1516728670.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:11.336Z,1516728671.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:11.730Z,1516728671.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:12.130Z,1516728672.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:12.524Z,1516728672.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:12.928Z,1516728672.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:13.327Z,1516728673.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:13.736Z,1516728673.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:14.133Z,1516728674.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:14.545Z,1516728674.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:14.925Z,1516728674.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:15.321Z,1516728675.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:15.731Z,1516728675.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:16.125Z,1516728676.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:16.522Z,1516728676.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:16.940Z,1516728676.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:17.335Z,1516728677.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:17.734Z,1516728677.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:18.129Z,1516728678.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:18.524Z,1516728678.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:18.922Z,1516728678.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:19.328Z,1516728679.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:19.731Z,1516728679.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:20.134Z,1516728680.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:20.530Z,1516728680.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:20.929Z,1516728680.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:21.325Z,1516728681.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:21.730Z,1516728681.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:22.134Z,1516728682.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:22.530Z,1516728682.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:22.927Z,1516728682.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:23.331Z,1516728683.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:23.733Z,1516728683.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:24.141Z,1516728684.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:24.534Z,1516728684.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:24.922Z,1516728684.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:25.328Z,1516728685.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:25.735Z,1516728685.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:26.134Z,1516728686.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:26.533Z,1516728686.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:26.924Z,1516728686.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:27.327Z,1516728687.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:27.730Z,1516728687.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:28.134Z,1516728688.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:28.530Z,1516728688.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:28.927Z,1516728688.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:28.929Z,1516728688.929 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:28.929Z,1516728688.929 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 284 2018-01-23T17:31:28.930Z,1516728688.930 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:31:28.942Z,1516728688.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:31:29.323Z,1516728689.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:29.335Z,1516728689.335 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:31:29.335Z,1516728689.335 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 284 2018-01-23T17:31:29.730Z,1516728689.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:29.732Z,1516728689.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:31:29.732Z,1516728689.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:31:29.732Z,1516728689.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:31:30.133Z,1516728690.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:30.528Z,1516728690.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:30.930Z,1516728690.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:31.337Z,1516728691.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:31.738Z,1516728691.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:32.161Z,1516728692.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:32.561Z,1516728692.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:32.953Z,1516728692.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:33.358Z,1516728693.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:33.754Z,1516728693.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:34.156Z,1516728694.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:34.526Z,1516728694.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:34.932Z,1516728694.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:35.341Z,1516728695.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:35.782Z,1516728695.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:36.149Z,1516728696.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:42.702Z,1516728702.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:42.702Z,1516728702.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 284 2018-01-23T17:31:42.702Z,1516728702.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:31:42.704Z,1516728702.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:42.704Z,1516728702.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 284 2018-01-23T17:31:42.704Z,1516728702.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:31:42.747Z,1516728702.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:31:42.748Z,1516728702.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:31:42.901Z,1516728702.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:31:42.901Z,1516728702.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 284 2018-01-23T17:31:42.901Z,1516728702.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:31:42.901Z,1516728702.901 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 284 2018-01-23T17:31:43.242Z,1516728703.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:31:43.242Z,1516728703.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:31:43.247Z,1516728703.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:31:43.248Z,1516728703.248 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:31:43.248Z,1516728703.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:31:43.248Z,1516728703.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:31:43.646Z,1516728703.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T17:31:43.647Z,1516728703.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:44.048Z,1516728704.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T17:31:44.049Z,1516728704.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:44.449Z,1516728704.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T17:31:44.450Z,1516728704.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:44.846Z,1516728704.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T17:31:44.847Z,1516728704.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:45.252Z,1516728705.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s. 2018-01-23T17:31:45.253Z,1516728705.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:45.648Z,1516728705.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T17:31:45.649Z,1516728705.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:46.056Z,1516728706.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s. 2018-01-23T17:31:46.057Z,1516728706.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:46.444Z,1516728706.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T17:31:46.445Z,1516728706.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:46.829Z,1516728706.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T17:31:46.830Z,1516728706.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:47.268Z,1516728707.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s. 2018-01-23T17:31:47.269Z,1516728707.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:47.629Z,1516728707.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T17:31:47.630Z,1516728707.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:48.029Z,1516728708.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T17:31:48.030Z,1516728708.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:48.476Z,1516728708.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s. 2018-01-23T17:31:48.477Z,1516728708.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:48.837Z,1516728708.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T17:31:48.838Z,1516728708.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:49.226Z,1516728709.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T17:31:49.231Z,1516728709.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:49.652Z,1516728709.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s. 2018-01-23T17:31:49.653Z,1516728709.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:50.035Z,1516728710.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T17:31:50.036Z,1516728710.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:50.462Z,1516728710.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s. 2018-01-23T17:31:50.479Z,1516728710.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:50.840Z,1516728710.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T17:31:50.841Z,1516728710.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:51.236Z,1516728711.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T17:31:51.237Z,1516728711.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:51.641Z,1516728711.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T17:31:51.642Z,1516728711.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:52.031Z,1516728712.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T17:31:52.032Z,1516728712.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:52.436Z,1516728712.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T17:31:52.437Z,1516728712.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:52.810Z,1516728712.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x34538 got:0x60351 2018-01-23T17:31:52.840Z,1516728712.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T17:31:52.841Z,1516728712.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:53.238Z,1516728713.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T17:31:53.239Z,1516728713.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:53.629Z,1516728713.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T17:31:53.630Z,1516728713.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:54.040Z,1516728714.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T17:31:54.041Z,1516728714.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:54.438Z,1516728714.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T17:31:54.439Z,1516728714.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:54.833Z,1516728714.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T17:31:54.834Z,1516728714.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:55.236Z,1516728715.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T17:31:55.237Z,1516728715.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:55.640Z,1516728715.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.404368 seconds old. 2018-01-23T17:31:55.641Z,1516728715.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T17:31:55.642Z,1516728715.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:55.643Z,1516728715.643 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.404651 seconds old. 2018-01-23T17:31:55.644Z,1516728715.644 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405098 seconds old. 2018-01-23T17:31:56.033Z,1516728716.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.796964 seconds old. 2018-01-23T17:31:56.034Z,1516728716.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T17:31:56.039Z,1516728716.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:56.040Z,1516728716.040 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.801532 seconds old. 2018-01-23T17:31:56.041Z,1516728716.041 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.801916 seconds old. 2018-01-23T17:31:56.413Z,1516728716.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.177384 seconds old. 2018-01-23T17:31:56.414Z,1516728716.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T17:31:56.415Z,1516728716.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:56.416Z,1516728716.416 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.177894 seconds old. 2018-01-23T17:31:56.417Z,1516728716.417 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.178251 seconds old. 2018-01-23T17:31:56.839Z,1516728716.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.603106 seconds old. 2018-01-23T17:31:56.840Z,1516728716.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T17:31:56.841Z,1516728716.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:56.841Z,1516728716.841 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.603398 seconds old. 2018-01-23T17:31:56.843Z,1516728716.843 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.603747 seconds old. 2018-01-23T17:31:57.244Z,1516728717.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T17:31:57.245Z,1516728717.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:57.619Z,1516728717.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T17:31:57.620Z,1516728717.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:58.022Z,1516728718.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T17:31:58.023Z,1516728718.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:58.426Z,1516728718.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T17:31:58.427Z,1516728718.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:58.818Z,1516728718.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T17:31:58.819Z,1516728718.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:59.215Z,1516728719.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T17:31:59.216Z,1516728719.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:31:59.614Z,1516728719.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T17:31:59.615Z,1516728719.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:00.040Z,1516728720.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T17:32:00.041Z,1516728720.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:00.425Z,1516728720.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T17:32:00.426Z,1516728720.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:00.825Z,1516728720.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T17:32:00.826Z,1516728720.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:01.214Z,1516728721.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T17:32:01.215Z,1516728721.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:01.630Z,1516728721.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T17:32:01.647Z,1516728721.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:02.022Z,1516728722.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T17:32:02.023Z,1516728722.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:02.497Z,1516728722.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s. 2018-01-23T17:32:02.497Z,1516728722.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:02.825Z,1516728722.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:03.248Z,1516728723.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:03.641Z,1516728723.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:04.020Z,1516728724.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:04.435Z,1516728724.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:04.833Z,1516728724.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:05.224Z,1516728725.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:05.628Z,1516728725.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:06.030Z,1516728726.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:06.444Z,1516728726.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:06.835Z,1516728726.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:07.228Z,1516728727.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:07.628Z,1516728727.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:08.022Z,1516728728.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:08.433Z,1516728728.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:08.839Z,1516728728.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:09.245Z,1516728729.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:09.653Z,1516728729.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:10.045Z,1516728730.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:10.403Z,1516728730.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:10.818Z,1516728730.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:11.211Z,1516728731.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:11.613Z,1516728731.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:12.015Z,1516728732.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:12.445Z,1516728732.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:12.834Z,1516728732.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:13.211Z,1516728733.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:13.612Z,1516728733.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:14.018Z,1516728734.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:14.411Z,1516728734.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:14.818Z,1516728734.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:15.218Z,1516728735.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:15.625Z,1516728735.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:16.015Z,1516728736.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:16.414Z,1516728736.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:16.811Z,1516728736.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:17.215Z,1516728737.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:17.611Z,1516728737.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:18.021Z,1516728738.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:18.417Z,1516728738.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:18.827Z,1516728738.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:19.217Z,1516728739.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:19.613Z,1516728739.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:20.014Z,1516728740.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:20.410Z,1516728740.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:20.829Z,1516728740.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:21.222Z,1516728741.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:21.622Z,1516728741.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:22.013Z,1516728742.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:22.413Z,1516728742.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:22.824Z,1516728742.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:23.213Z,1516728743.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:23.613Z,1516728743.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:24.023Z,1516728744.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:24.436Z,1516728744.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:24.822Z,1516728744.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:25.217Z,1516728745.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:25.615Z,1516728745.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:26.014Z,1516728746.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:26.419Z,1516728746.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:26.839Z,1516728746.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:27.225Z,1516728747.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:27.637Z,1516728747.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:28.015Z,1516728748.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:28.413Z,1516728748.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:28.822Z,1516728748.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:29.237Z,1516728749.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:29.622Z,1516728749.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:30.016Z,1516728750.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:30.423Z,1516728750.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:30.824Z,1516728750.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:31.235Z,1516728751.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:31.627Z,1516728751.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:32.024Z,1516728752.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:32.431Z,1516728752.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:32.835Z,1516728752.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:33.237Z,1516728753.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:33.630Z,1516728753.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:34.011Z,1516728754.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:34.409Z,1516728754.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:34.842Z,1516728754.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:35.236Z,1516728755.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:35.239Z,1516728755.239 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:32:35.239Z,1516728755.239 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:32:35.239Z,1516728755.239 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:32:35.239Z,1516728755.239 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:32:35.618Z,1516728755.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:35.637Z,1516728755.637 [Default:CheckIn:D] Stopped 2018-01-23T17:32:35.637Z,1516728755.637 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:32:36.016Z,1516728756.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:36.019Z,1516728756.019 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 854.726302 min 2018-01-23T17:32:36.019Z,1516728756.019 [Default:CheckIn:E] Stopped 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn] Stopped 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn](INFO): Running loop #84 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn] Running Loop=84 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:32:36.020Z,1516728756.020 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:32:36.429Z,1516728756.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:39.521Z,1516728759.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:39.677Z,1516728759.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:40.024Z,1516728760.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:40.392Z,1516728760.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:40.788Z,1516728760.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:41.193Z,1516728761.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:41.589Z,1516728761.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:41.998Z,1516728761.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:42.402Z,1516728762.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:42.798Z,1516728762.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:43.188Z,1516728763.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:43.593Z,1516728763.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:43.989Z,1516728763.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:44.387Z,1516728764.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:44.799Z,1516728764.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:45.197Z,1516728765.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:45.598Z,1516728765.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:46.002Z,1516728766.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:46.392Z,1516728766.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:46.797Z,1516728766.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:47.201Z,1516728767.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:47.597Z,1516728767.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:47.988Z,1516728767.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:48.390Z,1516728768.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:48.796Z,1516728768.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:49.199Z,1516728769.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:49.601Z,1516728769.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:49.997Z,1516728769.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:50.388Z,1516728770.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:50.797Z,1516728770.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:51.190Z,1516728771.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:51.588Z,1516728771.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:51.998Z,1516728771.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:52.401Z,1516728772.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:52.797Z,1516728772.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:53.193Z,1516728773.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:53.588Z,1516728773.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:53.987Z,1516728773.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:54.390Z,1516728774.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:54.789Z,1516728774.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:55.199Z,1516728775.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:55.603Z,1516728775.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:56.010Z,1516728776.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:56.389Z,1516728776.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:56.799Z,1516728776.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:57.201Z,1516728777.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:57.601Z,1516728777.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:58.009Z,1516728778.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:58.409Z,1516728778.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:58.800Z,1516728778.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:59.205Z,1516728779.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:59.583Z,1516728779.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:32:59.982Z,1516728779.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:00.409Z,1516728780.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:00.815Z,1516728780.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:01.207Z,1516728781.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:01.613Z,1516728781.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:02.012Z,1516728782.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:02.380Z,1516728782.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:02.789Z,1516728782.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:03.187Z,1516728783.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:03.585Z,1516728783.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:04.012Z,1516728784.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:04.405Z,1516728784.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:04.790Z,1516728784.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:05.193Z,1516728785.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:05.588Z,1516728785.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:05.985Z,1516728785.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:06.384Z,1516728786.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:06.792Z,1516728786.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:07.190Z,1516728787.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:07.594Z,1516728787.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:07.996Z,1516728787.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:08.384Z,1516728788.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:08.786Z,1516728788.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:09.187Z,1516728789.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:09.585Z,1516728789.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:09.990Z,1516728789.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:10.393Z,1516728790.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:10.790Z,1516728790.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:11.186Z,1516728791.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:11.586Z,1516728791.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:11.986Z,1516728791.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:12.389Z,1516728792.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:12.789Z,1516728792.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:13.190Z,1516728793.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:13.594Z,1516728793.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:14.019Z,1516728794.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:14.385Z,1516728794.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:14.786Z,1516728794.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:15.193Z,1516728795.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:15.587Z,1516728795.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:15.990Z,1516728795.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:16.394Z,1516728796.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:16.790Z,1516728796.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:17.189Z,1516728797.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:17.592Z,1516728797.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:17.993Z,1516728797.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:18.389Z,1516728798.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:18.788Z,1516728798.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:19.198Z,1516728799.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:19.601Z,1516728799.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:19.998Z,1516728799.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:20.397Z,1516728800.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:20.792Z,1516728800.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:21.205Z,1516728801.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:21.596Z,1516728801.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:22.009Z,1516728802.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:22.410Z,1516728802.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:22.799Z,1516728802.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:23.189Z,1516728803.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:23.602Z,1516728803.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:24.001Z,1516728804.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:24.397Z,1516728804.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:24.796Z,1516728804.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:25.200Z,1516728805.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:25.602Z,1516728805.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:26.016Z,1516728806.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:26.395Z,1516728806.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:26.795Z,1516728806.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:27.201Z,1516728807.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:27.599Z,1516728807.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:28.026Z,1516728808.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:28.406Z,1516728808.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:28.808Z,1516728808.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:29.200Z,1516728809.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:29.596Z,1516728809.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:29.000Z,1516728810.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:30.385Z,1516728810.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:30.788Z,1516728810.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:31.214Z,1516728811.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:31.615Z,1516728811.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:31.995Z,1516728811.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:32.389Z,1516728812.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:32.787Z,1516728812.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:33.188Z,1516728813.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:33.586Z,1516728813.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:34.021Z,1516728814.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:34.393Z,1516728814.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:34.790Z,1516728814.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:35.186Z,1516728815.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:35.588Z,1516728815.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:35.987Z,1516728815.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:36.387Z,1516728816.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:36.792Z,1516728816.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:39.845Z,1516728819.845 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T17:33:39.845Z,1516728819.845 [NAL9602] Data Fault, FailCount= 3 2018-01-23T17:33:39.845Z,1516728819.845 [NAL9602](ERROR): Data Fault 2018-01-23T17:33:40.002Z,1516728820.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:40.093Z,1516728820.093 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T17:33:40.121Z,1516728820.121 [NAL9602](INFO): Powering down 2018-01-23T17:33:40.185Z,1516728820.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:40.580Z,1516728820.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:40.983Z,1516728820.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:40.996Z,1516728820.996 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:33:40.996Z,1516728820.996 [NAL9602] No Fault, FailCount= 3 2018-01-23T17:33:41.348Z,1516728821.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:41.750Z,1516728821.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:42.150Z,1516728822.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:42.547Z,1516728822.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:42.954Z,1516728822.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:43.346Z,1516728823.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:43.753Z,1516728823.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:44.151Z,1516728824.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:44.547Z,1516728824.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:44.948Z,1516728824.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:45.350Z,1516728825.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:45.748Z,1516728825.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:46.149Z,1516728826.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:46.551Z,1516728826.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:46.948Z,1516728826.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:47.348Z,1516728827.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:47.748Z,1516728827.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:48.149Z,1516728828.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:48.548Z,1516728828.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:48.944Z,1516728828.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:49.348Z,1516728829.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:49.746Z,1516728829.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:50.146Z,1516728830.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:50.548Z,1516728830.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:50.949Z,1516728830.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:51.354Z,1516728831.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:51.752Z,1516728831.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:52.157Z,1516728832.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:52.547Z,1516728832.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:52.948Z,1516728832.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:53.357Z,1516728833.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:53.747Z,1516728833.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:54.148Z,1516728834.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:54.548Z,1516728834.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:54.953Z,1516728834.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:55.348Z,1516728835.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:55.753Z,1516728835.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:56.151Z,1516728836.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:56.548Z,1516728836.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:56.957Z,1516728836.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:57.348Z,1516728837.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:57.746Z,1516728837.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:58.149Z,1516728838.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:58.544Z,1516728838.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:58.946Z,1516728838.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:59.346Z,1516728839.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:33:59.753Z,1516728839.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:00.147Z,1516728840.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:00.553Z,1516728840.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:00.953Z,1516728840.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:01.348Z,1516728841.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:01.746Z,1516728841.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:02.146Z,1516728842.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:02.546Z,1516728842.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:02.956Z,1516728842.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:03.346Z,1516728843.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:03.746Z,1516728843.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:04.146Z,1516728844.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:04.553Z,1516728844.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:04.946Z,1516728844.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:05.353Z,1516728845.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:05.751Z,1516728845.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:06.153Z,1516728846.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:06.553Z,1516728846.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:06.950Z,1516728846.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:07.357Z,1516728847.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:07.757Z,1516728847.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:08.151Z,1516728848.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:08.552Z,1516728848.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:08.956Z,1516728848.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:09.351Z,1516728849.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:09.753Z,1516728849.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:10.149Z,1516728850.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:10.508Z,1516728850.508 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:34:10.556Z,1516728850.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:10.955Z,1516728850.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:11.356Z,1516728851.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:11.751Z,1516728851.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:12.156Z,1516728852.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:12.557Z,1516728852.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:12.951Z,1516728852.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:13.354Z,1516728853.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:13.757Z,1516728853.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:14.160Z,1516728854.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:14.553Z,1516728854.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:14.950Z,1516728854.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:15.360Z,1516728855.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:15.753Z,1516728855.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:16.152Z,1516728856.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:16.557Z,1516728856.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:16.955Z,1516728856.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:17.360Z,1516728857.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:17.724Z,1516728857.724 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:17.760Z,1516728857.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:18.128Z,1516728858.128 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:18.161Z,1516728858.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:18.524Z,1516728858.524 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:18.559Z,1516728858.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:18.963Z,1516728858.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:19.357Z,1516728859.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:19.757Z,1516728859.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:20.164Z,1516728860.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:20.553Z,1516728860.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:20.959Z,1516728860.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:21.309Z,1516728861.309 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:34:21.353Z,1516728861.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:21.752Z,1516728861.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:22.162Z,1516728862.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:22.576Z,1516728862.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:22.962Z,1516728862.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:23.369Z,1516728863.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:23.761Z,1516728863.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:24.140Z,1516728864.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:24.581Z,1516728864.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:24.981Z,1516728864.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:25.370Z,1516728865.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:25.744Z,1516728865.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:26.153Z,1516728866.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:26.544Z,1516728866.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:26.955Z,1516728866.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:27.356Z,1516728867.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:27.754Z,1516728867.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:28.161Z,1516728868.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:28.551Z,1516728868.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:28.946Z,1516728868.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:29.352Z,1516728869.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:29.732Z,1516728869.732 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:29.754Z,1516728869.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:29.756Z,1516728869.756 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:29.756Z,1516728869.756 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 285 2018-01-23T17:34:29.757Z,1516728869.757 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:34:29.769Z,1516728869.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:34:30.124Z,1516728870.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:30.158Z,1516728870.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:30.170Z,1516728870.170 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:34:30.170Z,1516728870.170 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 285 2018-01-23T17:34:30.552Z,1516728870.552 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:30.569Z,1516728870.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:30.570Z,1516728870.570 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:34:30.571Z,1516728870.571 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:34:30.571Z,1516728870.571 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:34:30.946Z,1516728870.946 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:30.962Z,1516728870.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:31.343Z,1516728871.343 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:31.365Z,1516728871.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:31.725Z,1516728871.725 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:31.754Z,1516728871.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:32.124Z,1516728872.124 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:32.161Z,1516728872.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:32.529Z,1516728872.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:32.556Z,1516728872.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:32.925Z,1516728872.925 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:32.960Z,1516728872.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:33.335Z,1516728873.335 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:33.369Z,1516728873.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:33.748Z,1516728873.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:33.767Z,1516728873.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:34.136Z,1516728874.136 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:34.173Z,1516728874.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:34.529Z,1516728874.529 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:34.567Z,1516728874.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:34.580Z,1516728874.580 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:34:34.924Z,1516728874.924 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:34.961Z,1516728874.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:35.328Z,1516728875.328 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:35.365Z,1516728875.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:35.733Z,1516728875.733 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:35.750Z,1516728875.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:36.129Z,1516728876.129 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:36.144Z,1516728876.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:36.544Z,1516728876.544 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:36.575Z,1516728876.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:36.964Z,1516728876.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:36.979Z,1516728876.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:40.076Z,1516728880.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:40.097Z,1516728880.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:40.202Z,1516728880.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:40.245Z,1516728880.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:40.573Z,1516728880.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:34:40.589Z,1516728880.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:40.989Z,1516728880.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:41.385Z,1516728881.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:41.786Z,1516728881.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:42.193Z,1516728882.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:42.594Z,1516728882.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:42.997Z,1516728882.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:43.394Z,1516728883.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:43.394Z,1516728883.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 285 2018-01-23T17:34:43.394Z,1516728883.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:34:43.396Z,1516728883.396 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:43.396Z,1516728883.396 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 285 2018-01-23T17:34:43.396Z,1516728883.396 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:34:43.436Z,1516728883.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:34:43.436Z,1516728883.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:34:43.797Z,1516728883.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:34:43.797Z,1516728883.797 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 285 2018-01-23T17:34:43.798Z,1516728883.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:34:43.798Z,1516728883.798 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 285 2018-01-23T17:34:44.193Z,1516728884.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:34:44.193Z,1516728884.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:34:44.194Z,1516728884.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:34:44.194Z,1516728884.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:34:44.195Z,1516728884.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:34:44.195Z,1516728884.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:34:44.593Z,1516728884.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:34:44.594Z,1516728884.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:44.985Z,1516728884.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:34:44.986Z,1516728884.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:45.398Z,1516728885.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:34:45.403Z,1516728885.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:45.798Z,1516728885.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:34:45.799Z,1516728885.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:46.200Z,1516728886.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:34:46.201Z,1516728886.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:46.612Z,1516728886.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:34:46.613Z,1516728886.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:46.992Z,1516728886.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:34:46.993Z,1516728886.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:47.391Z,1516728887.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:34:47.392Z,1516728887.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:47.791Z,1516728887.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:34:47.792Z,1516728887.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:48.195Z,1516728888.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:34:48.196Z,1516728888.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:48.596Z,1516728888.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:34:48.596Z,1516728888.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:48.998Z,1516728888.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:34:48.999Z,1516728888.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:49.414Z,1516728889.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:34:49.415Z,1516728889.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:49.790Z,1516728889.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:34:49.791Z,1516728889.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:50.187Z,1516728890.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:34:50.188Z,1516728890.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:50.596Z,1516728890.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:34:50.597Z,1516728890.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:50.975Z,1516728890.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:34:50.976Z,1516728890.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:51.401Z,1516728891.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:34:51.402Z,1516728891.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:51.807Z,1516728891.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:34:51.808Z,1516728891.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:52.205Z,1516728892.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:34:52.206Z,1516728892.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:52.604Z,1516728892.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:34:52.605Z,1516728892.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:52.979Z,1516728892.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:34:52.980Z,1516728892.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:53.408Z,1516728893.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:34:53.409Z,1516728893.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:53.784Z,1516728893.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:34:53.785Z,1516728893.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:54.188Z,1516728894.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:34:54.189Z,1516728894.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:54.586Z,1516728894.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:34:54.587Z,1516728894.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:54.990Z,1516728894.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:34:54.991Z,1516728894.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:55.392Z,1516728895.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:34:55.393Z,1516728895.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:55.785Z,1516728895.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:34:55.786Z,1516728895.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:56.189Z,1516728896.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:34:56.190Z,1516728896.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:56.588Z,1516728896.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:34:56.589Z,1516728896.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:56.992Z,1516728896.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:34:56.993Z,1516728896.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:57.390Z,1516728897.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:34:57.391Z,1516728897.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:57.796Z,1516728897.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:34:57.797Z,1516728897.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:58.200Z,1516728898.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:34:58.201Z,1516728898.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:58.592Z,1516728898.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:34:58.593Z,1516728898.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:58.985Z,1516728898.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:34:58.986Z,1516728898.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:59.386Z,1516728899.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:34:59.387Z,1516728899.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:34:59.786Z,1516728899.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:34:59.788Z,1516728899.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:00.184Z,1516728900.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:35:00.185Z,1516728900.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:00.594Z,1516728900.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:35:00.595Z,1516728900.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:01.004Z,1516728901.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:35:01.005Z,1516728901.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:01.395Z,1516728901.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:35:01.396Z,1516728901.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:01.789Z,1516728901.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:35:01.790Z,1516728901.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:02.194Z,1516728902.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:35:02.195Z,1516728902.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:02.587Z,1516728902.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:35:02.588Z,1516728902.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:02.986Z,1516728902.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:35:02.987Z,1516728902.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:03.398Z,1516728903.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:03.799Z,1516728903.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:04.203Z,1516728904.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:04.587Z,1516728904.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:04.995Z,1516728904.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:05.394Z,1516728905.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:05.787Z,1516728905.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:06.198Z,1516728906.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:06.599Z,1516728906.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:06.999Z,1516728906.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:07.412Z,1516728907.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:07.785Z,1516728907.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:08.192Z,1516728908.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:08.600Z,1516728908.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:08.986Z,1516728908.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:09.397Z,1516728909.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:09.805Z,1516728909.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:10.194Z,1516728910.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:10.591Z,1516728910.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:10.997Z,1516728910.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:11.382Z,1516728911.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:11.795Z,1516728911.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:12.197Z,1516728912.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:12.604Z,1516728912.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:12.998Z,1516728912.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:13.406Z,1516728913.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:13.792Z,1516728913.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:14.200Z,1516728914.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:14.605Z,1516728914.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:14.973Z,1516728914.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:15.405Z,1516728915.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:15.810Z,1516728915.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:16.198Z,1516728916.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:16.585Z,1516728916.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:16.980Z,1516728916.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:17.377Z,1516728917.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:17.808Z,1516728917.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:18.185Z,1516728918.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:18.593Z,1516728918.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:18.998Z,1516728918.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:19.400Z,1516728919.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:19.787Z,1516728919.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:20.188Z,1516728920.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:20.585Z,1516728920.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:20.983Z,1516728920.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:21.397Z,1516728921.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:21.794Z,1516728921.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:22.201Z,1516728922.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:22.584Z,1516728922.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:22.983Z,1516728922.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:23.383Z,1516728923.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:23.792Z,1516728923.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:24.192Z,1516728924.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:24.593Z,1516728924.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:24.997Z,1516728924.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:25.394Z,1516728925.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:25.786Z,1516728925.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:26.194Z,1516728926.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:26.585Z,1516728926.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:26.986Z,1516728926.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:27.401Z,1516728927.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:27.797Z,1516728927.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:28.205Z,1516728928.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:28.586Z,1516728928.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:28.988Z,1516728928.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:29.384Z,1516728929.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:29.787Z,1516728929.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:30.188Z,1516728930.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:30.593Z,1516728930.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:30.998Z,1516728930.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:31.395Z,1516728931.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:31.786Z,1516728931.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:32.185Z,1516728932.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:32.585Z,1516728932.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:32.986Z,1516728932.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:33.394Z,1516728933.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:33.797Z,1516728933.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:34.194Z,1516728934.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:34.586Z,1516728934.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:34.996Z,1516728934.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:35.385Z,1516728935.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:35.792Z,1516728935.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:36.196Z,1516728936.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:36.598Z,1516728936.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:36.000Z,1516728937.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:40.091Z,1516728940.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:40.236Z,1516728940.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:40.561Z,1516728940.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:40.961Z,1516728940.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:41.386Z,1516728941.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:41.763Z,1516728941.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:42.164Z,1516728942.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:42.554Z,1516728942.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:42.954Z,1516728942.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:43.361Z,1516728943.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:43.757Z,1516728943.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:44.157Z,1516728944.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:44.561Z,1516728944.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:44.962Z,1516728944.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:45.365Z,1516728945.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:45.760Z,1516728945.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:46.161Z,1516728946.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:46.561Z,1516728946.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:46.941Z,1516728946.941 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:35:46.957Z,1516728946.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:47.346Z,1516728947.346 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:35:47.362Z,1516728947.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:47.748Z,1516728947.748 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T17:35:47.763Z,1516728947.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:48.168Z,1516728948.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:48.565Z,1516728948.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:48.960Z,1516728948.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:49.362Z,1516728949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:49.763Z,1516728949.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:50.161Z,1516728950.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:50.558Z,1516728950.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:50.955Z,1516728950.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:51.391Z,1516728951.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:51.765Z,1516728951.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:52.165Z,1516728952.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:52.565Z,1516728952.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:52.960Z,1516728952.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:53.371Z,1516728953.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:53.771Z,1516728953.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:54.180Z,1516728954.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:54.565Z,1516728954.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:54.969Z,1516728954.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:55.377Z,1516728955.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:55.769Z,1516728955.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:56.173Z,1516728956.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:56.565Z,1516728956.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:56.964Z,1516728956.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:57.368Z,1516728957.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:57.771Z,1516728957.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:58.166Z,1516728958.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:58.564Z,1516728958.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:58.966Z,1516728958.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:59.371Z,1516728959.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:35:59.774Z,1516728959.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:00.177Z,1516728960.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:00.564Z,1516728960.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:00.964Z,1516728960.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:01.372Z,1516728961.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:01.770Z,1516728961.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:02.172Z,1516728962.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:02.566Z,1516728962.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:02.958Z,1516728962.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:03.371Z,1516728963.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:03.773Z,1516728963.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:04.168Z,1516728964.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:04.564Z,1516728964.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:04.969Z,1516728964.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:05.377Z,1516728965.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:05.780Z,1516728965.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:06.186Z,1516728966.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:06.568Z,1516728966.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:06.953Z,1516728966.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:07.385Z,1516728967.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:07.776Z,1516728967.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:08.185Z,1516728968.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:08.557Z,1516728968.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:08.952Z,1516728968.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:09.382Z,1516728969.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:09.782Z,1516728969.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:10.185Z,1516728970.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:10.557Z,1516728970.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:10.962Z,1516728970.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:11.359Z,1516728971.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:11.762Z,1516728971.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:12.160Z,1516728972.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:12.558Z,1516728972.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:12.958Z,1516728972.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:13.367Z,1516728973.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:13.770Z,1516728973.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:14.167Z,1516728974.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:14.568Z,1516728974.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:14.963Z,1516728974.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:15.367Z,1516728975.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:15.773Z,1516728975.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:16.170Z,1516728976.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:16.567Z,1516728976.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:16.971Z,1516728976.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:17.371Z,1516728977.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:17.774Z,1516728977.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:18.177Z,1516728978.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:18.565Z,1516728978.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:18.968Z,1516728978.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:19.379Z,1516728979.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:19.772Z,1516728979.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:20.170Z,1516728980.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:20.575Z,1516728980.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:20.969Z,1516728980.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:21.375Z,1516728981.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:21.785Z,1516728981.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:22.181Z,1516728982.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:22.576Z,1516728982.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:22.953Z,1516728982.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:23.377Z,1516728983.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:23.784Z,1516728983.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:24.183Z,1516728984.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:24.577Z,1516728984.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:24.961Z,1516728984.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:25.388Z,1516728985.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:25.766Z,1516728985.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:26.170Z,1516728986.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:26.560Z,1516728986.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:26.960Z,1516728986.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:27.363Z,1516728987.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:27.761Z,1516728987.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:28.161Z,1516728988.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:28.556Z,1516728988.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:28.958Z,1516728988.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:29.356Z,1516728989.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:29.791Z,1516728989.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:30.166Z,1516728990.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:30.566Z,1516728990.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:30.958Z,1516728990.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:31.367Z,1516728991.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:31.761Z,1516728991.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:32.173Z,1516728992.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:32.581Z,1516728992.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:32.976Z,1516728992.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:33.382Z,1516728993.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:33.831Z,1516728993.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:34.185Z,1516728994.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:34.589Z,1516728994.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:34.000Z,1516728995.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:35.368Z,1516728995.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:35.782Z,1516728995.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:36.194Z,1516728996.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:36.644Z,1516728996.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:36.996Z,1516728996.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:37.398Z,1516728997.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:44.906Z,1516729004.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:45.093Z,1516729005.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:45.485Z,1516729005.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:45.849Z,1516729005.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:46.284Z,1516729006.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:46.648Z,1516729006.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:47.057Z,1516729007.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:47.495Z,1516729007.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:47.903Z,1516729007.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:48.253Z,1516729008.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:48.646Z,1516729008.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:49.063Z,1516729009.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:49.453Z,1516729009.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:49.854Z,1516729009.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:50.268Z,1516729010.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:50.655Z,1516729010.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:51.041Z,1516729011.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:51.470Z,1516729011.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:51.849Z,1516729011.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:52.245Z,1516729012.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:52.653Z,1516729012.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:53.045Z,1516729013.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:53.489Z,1516729013.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:53.864Z,1516729013.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:54.246Z,1516729014.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:54.646Z,1516729014.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:55.030Z,1516729015.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:55.441Z,1516729015.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:55.838Z,1516729015.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:56.238Z,1516729016.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:56.630Z,1516729016.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:57.026Z,1516729017.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:57.436Z,1516729017.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:57.845Z,1516729017.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:58.245Z,1516729018.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:58.630Z,1516729018.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:59.025Z,1516729019.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:59.437Z,1516729019.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:36:59.838Z,1516729019.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:00.237Z,1516729020.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:00.626Z,1516729020.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:01.036Z,1516729021.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:01.435Z,1516729021.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:01.837Z,1516729021.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:02.243Z,1516729022.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:02.627Z,1516729022.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:03.032Z,1516729023.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:03.435Z,1516729023.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:03.839Z,1516729023.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:04.234Z,1516729024.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:04.638Z,1516729024.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:05.030Z,1516729025.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:05.445Z,1516729025.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:05.840Z,1516729025.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:06.238Z,1516729026.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:06.626Z,1516729026.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:07.034Z,1516729027.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:07.442Z,1516729027.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:07.845Z,1516729027.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:08.238Z,1516729028.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:08.613Z,1516729028.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:09.040Z,1516729029.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:09.446Z,1516729029.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:09.845Z,1516729029.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:10.248Z,1516729030.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:10.639Z,1516729030.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:11.037Z,1516729031.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:11.421Z,1516729031.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:11.820Z,1516729031.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:12.241Z,1516729032.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:12.658Z,1516729032.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:13.048Z,1516729033.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:13.446Z,1516729033.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:13.829Z,1516729033.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:14.225Z,1516729034.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:14.622Z,1516729034.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:15.022Z,1516729035.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:15.424Z,1516729035.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:15.834Z,1516729035.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:16.238Z,1516729036.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:16.636Z,1516729036.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:17.021Z,1516729037.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:17.424Z,1516729037.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:17.836Z,1516729037.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:18.232Z,1516729038.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:18.646Z,1516729038.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:19.039Z,1516729039.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:19.435Z,1516729039.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:19.833Z,1516729039.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:20.282Z,1516729040.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:20.617Z,1516729040.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:21.017Z,1516729041.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:21.419Z,1516729041.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:21.830Z,1516729041.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:22.233Z,1516729042.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:22.630Z,1516729042.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:23.045Z,1516729043.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:23.429Z,1516729043.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:23.824Z,1516729043.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:24.223Z,1516729044.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:24.626Z,1516729044.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:25.036Z,1516729045.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:25.426Z,1516729045.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:25.823Z,1516729045.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:26.236Z,1516729046.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:26.625Z,1516729046.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:27.025Z,1516729047.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:27.425Z,1516729047.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:27.834Z,1516729047.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:28.238Z,1516729048.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:28.641Z,1516729048.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:29.021Z,1516729049.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:29.429Z,1516729049.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:29.830Z,1516729049.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:30.223Z,1516729050.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:30.658Z,1516729050.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:30.663Z,1516729050.663 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:30.663Z,1516729050.663 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 286 2018-01-23T17:37:30.663Z,1516729050.663 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:37:30.684Z,1516729050.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:37:31.034Z,1516729051.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:31.046Z,1516729051.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:37:31.071Z,1516729051.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 286 2018-01-23T17:37:31.433Z,1516729051.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:31.435Z,1516729051.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:37:31.435Z,1516729051.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:37:31.436Z,1516729051.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:37:31.825Z,1516729051.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:32.225Z,1516729052.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:32.623Z,1516729052.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:33.026Z,1516729053.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:33.425Z,1516729053.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:33.840Z,1516729053.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:34.237Z,1516729054.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:34.645Z,1516729054.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:35.033Z,1516729055.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:35.426Z,1516729055.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:35.841Z,1516729055.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:36.228Z,1516729056.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:36.231Z,1516729056.231 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:32:36.0Z 2018-01-23T17:37:36.231Z,1516729056.231 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:37:36.232Z,1516729056.232 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:37:36.638Z,1516729056.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:37.181Z,1516729057.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:37.437Z,1516729057.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:40.533Z,1516729060.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:40.610Z,1516729060.610 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0336.lzma 2018-01-23T17:37:40.645Z,1516729060.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:41.019Z,1516729061.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:41.365Z,1516729061.365 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0336.lzma.bak 2018-01-23T17:37:41.365Z,1516729061.365 [DataOverHttps](INFO): SBD MOMSN=7756219 2018-01-23T17:37:41.440Z,1516729061.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:42.193Z,1516729062.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:42.328Z,1516729062.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:45.357Z,1516729065.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:45.357Z,1516729065.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 286 2018-01-23T17:37:45.357Z,1516729065.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:37:45.393Z,1516729065.393 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:45.394Z,1516729065.394 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 286 2018-01-23T17:37:45.394Z,1516729065.394 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:37:45.406Z,1516729065.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:37:45.406Z,1516729065.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:37:45.539Z,1516729065.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:37:45.539Z,1516729065.539 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 286 2018-01-23T17:37:45.540Z,1516729065.540 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:37:45.540Z,1516729065.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 286 2018-01-23T17:37:45.877Z,1516729065.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:37:45.878Z,1516729065.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:37:45.878Z,1516729065.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:37:45.879Z,1516729065.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:37:45.879Z,1516729065.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:37:45.879Z,1516729065.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:37:46.284Z,1516729066.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T17:37:46.285Z,1516729066.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:46.683Z,1516729066.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T17:37:46.684Z,1516729066.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:47.062Z,1516729067.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T17:37:47.063Z,1516729067.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:50.157Z,1516729070.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:37:50.158Z,1516729070.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:50.239Z,1516729070.239 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0337.lzma 2018-01-23T17:37:50.300Z,1516729070.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T17:37:50.301Z,1516729070.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:50.644Z,1516729070.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T17:37:50.645Z,1516729070.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:50.990Z,1516729070.990 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0337.lzma.bak 2018-01-23T17:37:50.990Z,1516729070.990 [DataOverHttps](INFO): SBD MOMSN=7756221 2018-01-23T17:37:51.064Z,1516729071.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T17:37:51.065Z,1516729071.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:51.689Z,1516729071.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s. 2018-01-23T17:37:51.690Z,1516729071.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:51.693Z,1516729071.693 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:37:51.693Z,1516729071.693 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:37:51.693Z,1516729071.693 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:37:51.841Z,1516729071.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T17:37:51.842Z,1516729071.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:54.949Z,1516729074.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:37:54.950Z,1516729074.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:55.068Z,1516729075.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T17:37:55.069Z,1516729075.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:55.418Z,1516729075.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T17:37:55.419Z,1516729075.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:55.845Z,1516729075.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T17:37:55.846Z,1516729075.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:56.245Z,1516729076.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T17:37:56.246Z,1516729076.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:56.624Z,1516729076.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T17:37:56.625Z,1516729076.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:57.017Z,1516729077.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T17:37:57.018Z,1516729077.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:57.420Z,1516729077.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T17:37:57.421Z,1516729077.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:57.834Z,1516729077.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T17:37:57.851Z,1516729077.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:58.225Z,1516729078.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T17:37:58.226Z,1516729078.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:58.630Z,1516729078.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T17:37:58.635Z,1516729078.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:59.018Z,1516729079.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T17:37:59.020Z,1516729079.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:59.420Z,1516729079.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T17:37:59.421Z,1516729079.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:37:59.817Z,1516729079.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T17:37:59.818Z,1516729079.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:00.218Z,1516729080.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T17:38:00.219Z,1516729080.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:00.629Z,1516729080.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T17:38:00.630Z,1516729080.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:01.036Z,1516729081.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T17:38:01.037Z,1516729081.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:01.428Z,1516729081.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T17:38:01.429Z,1516729081.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:01.828Z,1516729081.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T17:38:01.829Z,1516729081.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:02.211Z,1516729082.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T17:38:02.212Z,1516729082.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:02.629Z,1516729082.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T17:38:02.630Z,1516729082.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:03.013Z,1516729083.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T17:38:03.014Z,1516729083.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:03.427Z,1516729083.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T17:38:03.428Z,1516729083.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:03.821Z,1516729083.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T17:38:03.822Z,1516729083.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:04.225Z,1516729084.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T17:38:04.226Z,1516729084.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:04.618Z,1516729084.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T17:38:04.619Z,1516729084.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:05.008Z,1516729085.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T17:38:05.009Z,1516729085.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:05.413Z,1516729085.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:05.812Z,1516729085.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:06.269Z,1516729086.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:06.632Z,1516729086.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:07.026Z,1516729087.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:07.422Z,1516729087.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:07.820Z,1516729087.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:08.220Z,1516729088.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:08.678Z,1516729088.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:09.020Z,1516729089.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:09.417Z,1516729089.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:09.852Z,1516729089.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:10.228Z,1516729090.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:10.628Z,1516729090.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:11.017Z,1516729091.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:11.421Z,1516729091.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:11.825Z,1516729091.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:12.240Z,1516729092.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:12.626Z,1516729092.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:13.022Z,1516729093.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:13.426Z,1516729093.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:13.825Z,1516729093.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:14.222Z,1516729094.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:14.625Z,1516729094.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:15.029Z,1516729095.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:15.401Z,1516729095.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x14731 got:0x60179 2018-01-23T17:38:15.429Z,1516729095.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:15.846Z,1516729095.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:16.239Z,1516729096.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:16.633Z,1516729096.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:17.010Z,1516729097.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:17.416Z,1516729097.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:17.841Z,1516729097.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:18.220Z,1516729098.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:18.624Z,1516729098.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:19.022Z,1516729099.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:19.422Z,1516729099.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:19.840Z,1516729099.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:20.213Z,1516729100.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x31021 got:0x27671 2018-01-23T17:38:20.249Z,1516729100.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:20.625Z,1516729100.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:21.019Z,1516729101.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:21.442Z,1516729101.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:21.813Z,1516729101.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x51232 got:0x28708 2018-01-23T17:38:21.850Z,1516729101.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:22.228Z,1516729102.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:22.621Z,1516729102.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:23.042Z,1516729103.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:23.418Z,1516729103.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:23.817Z,1516729103.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:24.218Z,1516729104.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:24.647Z,1516729104.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:25.016Z,1516729105.016 [PNI_TCM](ERROR): CRC does not match. Expected:0x55279 got:0x13782 2018-01-23T17:38:25.048Z,1516729105.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:25.422Z,1516729105.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:25.819Z,1516729105.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:26.244Z,1516729106.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:26.619Z,1516729106.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:27.019Z,1516729107.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:27.417Z,1516729107.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:27.845Z,1516729107.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:28.225Z,1516729108.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:28.629Z,1516729108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:29.019Z,1516729109.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:29.450Z,1516729109.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:29.823Z,1516729109.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:30.219Z,1516729110.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:30.625Z,1516729110.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:31.045Z,1516729111.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:31.425Z,1516729111.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:31.823Z,1516729111.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:32.226Z,1516729112.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:32.636Z,1516729112.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:33.026Z,1516729113.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:33.418Z,1516729113.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:33.829Z,1516729113.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:34.241Z,1516729114.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:34.630Z,1516729114.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:35.029Z,1516729115.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:35.429Z,1516729115.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:35.837Z,1516729115.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:36.218Z,1516729116.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:36.630Z,1516729116.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:37.037Z,1516729117.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:37.449Z,1516729117.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:37.825Z,1516729117.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:38.225Z,1516729118.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:38.631Z,1516729118.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:39.045Z,1516729119.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:39.439Z,1516729119.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:39.820Z,1516729119.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:40.232Z,1516729120.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:40.626Z,1516729120.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:41.032Z,1516729121.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:41.433Z,1516729121.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:41.822Z,1516729121.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:42.223Z,1516729122.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:42.627Z,1516729122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:43.031Z,1516729123.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:43.429Z,1516729123.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:43.829Z,1516729123.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:44.225Z,1516729124.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:44.631Z,1516729124.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:45.034Z,1516729125.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:45.441Z,1516729125.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:45.821Z,1516729125.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:46.225Z,1516729126.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:46.630Z,1516729126.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:47.030Z,1516729127.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:47.427Z,1516729127.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:47.817Z,1516729127.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:48.227Z,1516729128.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:48.639Z,1516729128.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:49.027Z,1516729129.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:49.430Z,1516729129.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:49.828Z,1516729129.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:50.221Z,1516729130.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:50.628Z,1516729130.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:51.040Z,1516729131.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:51.432Z,1516729131.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:51.825Z,1516729131.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:52.231Z,1516729132.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:55.320Z,1516729135.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:55.467Z,1516729135.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:55.794Z,1516729135.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:56.190Z,1516729136.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:56.591Z,1516729136.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:56.993Z,1516729136.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:57.392Z,1516729137.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:57.795Z,1516729137.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:58.195Z,1516729138.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:58.594Z,1516729138.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:58.988Z,1516729138.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:59.391Z,1516729139.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:38:59.789Z,1516729139.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:00.188Z,1516729140.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:00.589Z,1516729140.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:00.994Z,1516729140.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:01.394Z,1516729141.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:01.794Z,1516729141.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:02.189Z,1516729142.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:02.587Z,1516729142.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:02.996Z,1516729142.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:03.389Z,1516729143.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:03.798Z,1516729143.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:04.205Z,1516729144.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:04.604Z,1516729144.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:04.996Z,1516729144.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:05.391Z,1516729145.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:05.805Z,1516729145.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:06.192Z,1516729146.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:06.594Z,1516729146.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:07.004Z,1516729147.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:07.409Z,1516729147.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:07.803Z,1516729147.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:08.208Z,1516729148.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:08.592Z,1516729148.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:08.993Z,1516729148.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:09.394Z,1516729149.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:09.814Z,1516729149.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:10.209Z,1516729150.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:10.609Z,1516729150.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:10.978Z,1516729150.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:11.380Z,1516729151.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:11.787Z,1516729151.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:12.188Z,1516729152.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:12.593Z,1516729152.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:12.998Z,1516729152.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:13.390Z,1516729153.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:13.798Z,1516729153.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:14.188Z,1516729154.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:14.587Z,1516729154.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:15.005Z,1516729155.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:15.393Z,1516729155.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:15.803Z,1516729155.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:16.206Z,1516729156.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:16.614Z,1516729156.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:16.989Z,1516729156.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:17.401Z,1516729157.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:17.804Z,1516729157.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:18.199Z,1516729158.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:18.597Z,1516729158.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:19.013Z,1516729159.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:19.405Z,1516729159.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:19.812Z,1516729159.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:20.180Z,1516729160.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:20.585Z,1516729160.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:20.988Z,1516729160.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:21.386Z,1516729161.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:21.813Z,1516729161.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:22.209Z,1516729162.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:22.615Z,1516729162.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:22.986Z,1516729162.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:23.393Z,1516729163.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:23.786Z,1516729163.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:24.189Z,1516729164.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:24.593Z,1516729164.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:24.998Z,1516729164.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:25.394Z,1516729165.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:25.794Z,1516729165.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:26.199Z,1516729166.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:26.589Z,1516729166.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:26.989Z,1516729166.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:27.394Z,1516729167.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:27.801Z,1516729167.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:28.206Z,1516729168.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:28.610Z,1516729168.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:29.001Z,1516729169.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:29.392Z,1516729169.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:29.795Z,1516729169.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:30.192Z,1516729170.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:30.591Z,1516729170.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:31.009Z,1516729171.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:31.408Z,1516729171.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:31.802Z,1516729171.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:32.195Z,1516729172.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:32.592Z,1516729172.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:32.997Z,1516729172.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:33.395Z,1516729173.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:33.802Z,1516729173.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:34.203Z,1516729174.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:34.604Z,1516729174.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:34.991Z,1516729174.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:35.395Z,1516729175.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:35.794Z,1516729175.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:36.201Z,1516729176.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:36.590Z,1516729176.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:37.009Z,1516729177.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:37.406Z,1516729177.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:37.808Z,1516729177.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:38.193Z,1516729178.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:38.596Z,1516729178.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:39.001Z,1516729179.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:39.401Z,1516729179.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:39.807Z,1516729179.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:40.206Z,1516729180.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:40.609Z,1516729180.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:40.996Z,1516729180.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:41.380Z,1516729181.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:41.780Z,1516729181.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:42.188Z,1516729182.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:42.591Z,1516729182.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:42.998Z,1516729182.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:43.398Z,1516729183.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:43.794Z,1516729183.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:44.188Z,1516729184.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:44.589Z,1516729184.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:44.990Z,1516729184.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:45.396Z,1516729185.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:45.801Z,1516729185.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:46.194Z,1516729186.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:46.595Z,1516729186.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:46.995Z,1516729186.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:47.396Z,1516729187.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:47.797Z,1516729187.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:48.190Z,1516729188.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:48.591Z,1516729188.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:48.998Z,1516729188.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:49.397Z,1516729189.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:49.801Z,1516729189.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:50.189Z,1516729190.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:50.589Z,1516729190.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:50.995Z,1516729190.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:51.389Z,1516729191.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:51.802Z,1516729191.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:52.201Z,1516729192.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:52.602Z,1516729192.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:55.689Z,1516729195.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:55.829Z,1516729195.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:56.179Z,1516729196.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:56.592Z,1516729196.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:56.979Z,1516729196.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:57.356Z,1516729197.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:57.761Z,1516729197.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:58.155Z,1516729198.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:58.557Z,1516729198.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:58.962Z,1516729198.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:59.366Z,1516729199.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:39:59.765Z,1516729199.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:00.157Z,1516729200.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:00.554Z,1516729200.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:00.958Z,1516729200.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:01.357Z,1516729201.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:01.761Z,1516729201.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:02.162Z,1516729202.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:02.569Z,1516729202.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:02.961Z,1516729202.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:03.355Z,1516729203.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:03.762Z,1516729203.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:04.159Z,1516729204.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:04.563Z,1516729204.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:04.966Z,1516729204.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:05.365Z,1516729205.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:05.767Z,1516729205.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:06.162Z,1516729206.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:06.565Z,1516729206.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:06.964Z,1516729206.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:07.373Z,1516729207.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:07.769Z,1516729207.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:08.171Z,1516729208.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:08.576Z,1516729208.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:08.962Z,1516729208.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:09.364Z,1516729209.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:09.774Z,1516729209.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:10.171Z,1516729210.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:10.578Z,1516729210.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:10.969Z,1516729210.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:11.362Z,1516729211.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:11.774Z,1516729211.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:12.171Z,1516729212.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:12.569Z,1516729212.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:12.969Z,1516729212.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:13.372Z,1516729213.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:13.774Z,1516729213.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:14.181Z,1516729214.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:14.580Z,1516729214.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:14.953Z,1516729214.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:15.358Z,1516729215.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:15.788Z,1516729215.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:16.184Z,1516729216.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:16.605Z,1516729216.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:16.954Z,1516729216.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:17.356Z,1516729217.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:17.756Z,1516729217.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:18.164Z,1516729218.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:18.565Z,1516729218.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:18.987Z,1516729218.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:19.361Z,1516729219.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:19.767Z,1516729219.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:20.156Z,1516729220.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:20.557Z,1516729220.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:20.959Z,1516729220.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:21.356Z,1516729221.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:21.762Z,1516729221.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:22.163Z,1516729222.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:22.561Z,1516729222.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:22.957Z,1516729222.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:23.361Z,1516729223.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:23.762Z,1516729223.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:24.162Z,1516729224.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:24.565Z,1516729224.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:24.958Z,1516729224.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:25.356Z,1516729225.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:25.769Z,1516729225.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:26.162Z,1516729226.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:26.596Z,1516729226.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:26.960Z,1516729226.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:27.361Z,1516729227.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:27.762Z,1516729227.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:28.162Z,1516729228.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:28.565Z,1516729228.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:28.960Z,1516729228.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:29.360Z,1516729229.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:29.765Z,1516729229.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:30.162Z,1516729230.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:30.563Z,1516729230.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:30.964Z,1516729230.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:31.360Z,1516729231.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:31.765Z,1516729231.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:31.767Z,1516729231.767 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:31.767Z,1516729231.767 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 287 2018-01-23T17:40:31.767Z,1516729231.767 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:40:31.792Z,1516729231.792 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:40:32.170Z,1516729232.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:32.182Z,1516729232.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:40:32.182Z,1516729232.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 287 2018-01-23T17:40:32.577Z,1516729232.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:32.578Z,1516729232.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:40:32.579Z,1516729232.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:40:32.579Z,1516729232.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:40:32.961Z,1516729232.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:33.364Z,1516729233.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:33.767Z,1516729233.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:34.170Z,1516729234.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:34.568Z,1516729234.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:34.969Z,1516729234.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:35.365Z,1516729235.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:35.767Z,1516729235.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:36.171Z,1516729236.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:36.573Z,1516729236.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:36.960Z,1516729236.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:37.361Z,1516729237.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:37.770Z,1516729237.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:38.170Z,1516729238.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:38.575Z,1516729238.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:38.961Z,1516729238.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:39.364Z,1516729239.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:39.767Z,1516729239.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:40.170Z,1516729240.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:40.568Z,1516729240.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:40.961Z,1516729240.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:41.362Z,1516729241.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:41.767Z,1516729241.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:42.171Z,1516729242.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:42.574Z,1516729242.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:42.965Z,1516729242.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:43.361Z,1516729243.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:43.773Z,1516729243.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:44.171Z,1516729244.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:44.568Z,1516729244.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:44.965Z,1516729244.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:45.359Z,1516729245.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:45.768Z,1516729245.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:46.171Z,1516729246.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:46.171Z,1516729246.171 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 287 2018-01-23T17:40:46.171Z,1516729246.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:40:46.173Z,1516729246.173 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:46.173Z,1516729246.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 287 2018-01-23T17:40:46.173Z,1516729246.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:40:46.206Z,1516729246.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:40:46.206Z,1516729246.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:40:46.585Z,1516729246.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:40:46.585Z,1516729246.585 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 287 2018-01-23T17:40:46.586Z,1516729246.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:40:46.586Z,1516729246.586 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 287 2018-01-23T17:40:46.976Z,1516729246.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:40:46.976Z,1516729246.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:40:46.977Z,1516729246.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:40:46.977Z,1516729246.977 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:40:46.977Z,1516729246.977 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:40:46.978Z,1516729246.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:40:47.358Z,1516729247.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:40:47.360Z,1516729247.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:47.764Z,1516729247.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:40:47.765Z,1516729247.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:48.164Z,1516729248.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:40:48.165Z,1516729248.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:48.557Z,1516729248.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:40:48.558Z,1516729248.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:48.971Z,1516729248.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:40:48.972Z,1516729248.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:49.370Z,1516729249.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:40:49.371Z,1516729249.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:49.767Z,1516729249.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:40:49.768Z,1516729249.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:50.164Z,1516729250.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:40:50.164Z,1516729250.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:50.561Z,1516729250.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:40:50.562Z,1516729250.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:50.964Z,1516729250.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:40:50.965Z,1516729250.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:51.364Z,1516729251.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:40:51.365Z,1516729251.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:51.762Z,1516729251.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:40:51.763Z,1516729251.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:52.172Z,1516729252.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:40:52.173Z,1516729252.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:52.577Z,1516729252.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:40:52.578Z,1516729252.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:52.969Z,1516729252.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:40:52.970Z,1516729252.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:56.064Z,1516729256.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T17:40:56.065Z,1516729256.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:56.212Z,1516729256.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:40:56.213Z,1516729256.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:56.535Z,1516729256.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:40:56.536Z,1516729256.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:56.946Z,1516729256.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:40:56.959Z,1516729256.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:57.340Z,1516729257.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:40:57.341Z,1516729257.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:57.731Z,1516729257.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:40:57.732Z,1516729257.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:58.132Z,1516729258.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:40:58.133Z,1516729258.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:58.531Z,1516729258.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:40:58.532Z,1516729258.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:58.941Z,1516729258.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:40:58.942Z,1516729258.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:59.344Z,1516729259.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:40:59.345Z,1516729259.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:40:59.745Z,1516729259.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:40:59.746Z,1516729259.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:00.130Z,1516729260.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:41:00.131Z,1516729260.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:00.531Z,1516729260.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:41:00.532Z,1516729260.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:00.930Z,1516729260.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:41:00.931Z,1516729260.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:01.344Z,1516729261.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:41:01.345Z,1516729261.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:01.738Z,1516729261.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:41:01.739Z,1516729261.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:02.140Z,1516729262.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:41:02.141Z,1516729262.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:02.544Z,1516729262.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:41:02.545Z,1516729262.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:02.949Z,1516729262.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:41:02.949Z,1516729262.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:03.336Z,1516729263.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:41:03.337Z,1516729263.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:03.734Z,1516729263.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:41:03.739Z,1516729263.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:04.139Z,1516729264.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:41:04.140Z,1516729264.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:04.534Z,1516729264.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:41:04.535Z,1516729264.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:04.941Z,1516729264.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:41:04.942Z,1516729264.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:05.352Z,1516729265.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:41:05.353Z,1516729265.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:05.749Z,1516729265.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:41:05.750Z,1516729265.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:06.140Z,1516729266.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:41:06.141Z,1516729266.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:06.533Z,1516729266.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:06.933Z,1516729266.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:07.333Z,1516729267.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:07.736Z,1516729267.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:08.145Z,1516729268.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:08.549Z,1516729268.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:08.945Z,1516729268.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:09.341Z,1516729269.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:09.732Z,1516729269.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:10.136Z,1516729270.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:10.535Z,1516729270.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:10.941Z,1516729270.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:11.345Z,1516729271.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:11.741Z,1516729271.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:12.133Z,1516729272.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:12.536Z,1516729272.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:12.945Z,1516729272.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:13.336Z,1516729273.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:13.731Z,1516729273.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:14.141Z,1516729274.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:14.550Z,1516729274.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:14.942Z,1516729274.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:15.330Z,1516729275.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:15.733Z,1516729275.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:16.137Z,1516729276.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:16.533Z,1516729276.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:16.941Z,1516729276.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:17.345Z,1516729277.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:17.749Z,1516729277.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:18.145Z,1516729278.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:18.536Z,1516729278.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:18.937Z,1516729278.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:19.349Z,1516729279.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:19.736Z,1516729279.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:20.153Z,1516729280.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:20.549Z,1516729280.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:20.953Z,1516729280.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:21.338Z,1516729281.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:21.737Z,1516729281.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:22.146Z,1516729282.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:22.545Z,1516729282.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:22.946Z,1516729282.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:23.346Z,1516729283.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:23.749Z,1516729283.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:24.138Z,1516729284.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:24.540Z,1516729284.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:24.945Z,1516729284.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:25.336Z,1516729285.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:25.735Z,1516729285.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:26.145Z,1516729286.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:26.553Z,1516729286.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:26.948Z,1516729286.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:27.337Z,1516729287.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:27.748Z,1516729287.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:28.142Z,1516729288.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:28.534Z,1516729288.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:28.945Z,1516729288.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:29.348Z,1516729289.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:29.748Z,1516729289.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:30.141Z,1516729290.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:30.543Z,1516729290.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:30.940Z,1516729290.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:31.344Z,1516729291.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:31.744Z,1516729291.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:32.153Z,1516729292.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:32.549Z,1516729292.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:32.959Z,1516729292.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:33.341Z,1516729293.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:33.737Z,1516729293.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:34.147Z,1516729294.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:34.537Z,1516729294.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:34.954Z,1516729294.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:35.350Z,1516729295.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:35.745Z,1516729295.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:36.145Z,1516729296.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:36.545Z,1516729296.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:36.948Z,1516729296.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:37.318Z,1516729297.318 [PNI_TCM](ERROR): CRC does not match. Expected:0x25307 got:0x53020 2018-01-23T17:41:37.345Z,1516729297.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:37.749Z,1516729297.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:38.151Z,1516729298.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:38.549Z,1516729298.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:38.965Z,1516729298.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:39.341Z,1516729299.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:39.749Z,1516729299.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:40.145Z,1516729300.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:40.517Z,1516729300.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x53706 got:0x17301 2018-01-23T17:41:40.552Z,1516729300.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:40.955Z,1516729300.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:41.353Z,1516729301.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:41.749Z,1516729301.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:42.143Z,1516729302.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:42.525Z,1516729302.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:42.924Z,1516729302.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:43.357Z,1516729303.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:43.730Z,1516729303.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:44.158Z,1516729304.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:44.563Z,1516729304.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:44.941Z,1516729304.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:45.335Z,1516729305.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:45.737Z,1516729305.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:46.135Z,1516729306.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:46.560Z,1516729306.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:46.937Z,1516729306.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:47.345Z,1516729307.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:47.766Z,1516729307.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:48.163Z,1516729308.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:48.535Z,1516729308.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:48.933Z,1516729308.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:49.336Z,1516729309.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:49.743Z,1516729309.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:50.141Z,1516729310.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:50.545Z,1516729310.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:50.949Z,1516729310.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:51.363Z,1516729311.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:51.740Z,1516729311.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:52.137Z,1516729312.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:52.541Z,1516729312.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:52.965Z,1516729312.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:53.342Z,1516729313.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:56.435Z,1516729316.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:56.574Z,1516729316.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:56.909Z,1516729316.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:57.297Z,1516729317.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:57.706Z,1516729317.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:58.105Z,1516729318.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:58.541Z,1516729318.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:58.907Z,1516729318.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:59.305Z,1516729319.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:41:59.702Z,1516729319.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:00.102Z,1516729320.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:00.506Z,1516729320.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:00.908Z,1516729320.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:01.306Z,1516729321.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:01.705Z,1516729321.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:02.112Z,1516729322.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:02.501Z,1516729322.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:02.905Z,1516729322.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:03.312Z,1516729323.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:03.717Z,1516729323.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:04.111Z,1516729324.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:04.505Z,1516729324.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:04.923Z,1516729324.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:05.318Z,1516729325.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:05.716Z,1516729325.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:06.108Z,1516729326.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:06.508Z,1516729326.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:06.914Z,1516729326.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:07.315Z,1516729327.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:07.721Z,1516729327.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:08.111Z,1516729328.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:08.497Z,1516729328.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:08.911Z,1516729328.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:09.323Z,1516729329.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:09.713Z,1516729329.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:10.105Z,1516729330.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:10.514Z,1516729330.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:10.920Z,1516729330.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:11.314Z,1516729331.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:11.723Z,1516729331.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:12.108Z,1516729332.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:12.515Z,1516729332.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:12.921Z,1516729332.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:13.321Z,1516729333.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:13.721Z,1516729333.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:14.092Z,1516729334.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:14.497Z,1516729334.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:14.921Z,1516729334.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:15.329Z,1516729335.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:15.720Z,1516729335.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:16.124Z,1516729336.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:16.499Z,1516729336.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:16.902Z,1516729336.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:17.327Z,1516729337.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:17.706Z,1516729337.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:18.098Z,1516729338.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:18.499Z,1516729338.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:18.904Z,1516729338.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:19.314Z,1516729339.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:19.710Z,1516729339.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:20.105Z,1516729340.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:20.498Z,1516729340.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:20.907Z,1516729340.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:21.300Z,1516729341.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:21.699Z,1516729341.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:22.109Z,1516729342.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:22.506Z,1516729342.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:22.909Z,1516729342.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:23.298Z,1516729343.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:23.709Z,1516729343.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:24.098Z,1516729344.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:24.504Z,1516729344.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:24.904Z,1516729344.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:25.308Z,1516729345.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:25.713Z,1516729345.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:26.109Z,1516729346.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:26.498Z,1516729346.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:26.899Z,1516729346.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:27.309Z,1516729347.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:27.704Z,1516729347.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:28.110Z,1516729348.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:28.516Z,1516729348.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:28.910Z,1516729348.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:29.309Z,1516729349.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:29.700Z,1516729349.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:30.099Z,1516729350.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:30.502Z,1516729350.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:30.907Z,1516729350.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:31.309Z,1516729351.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:31.712Z,1516729351.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:32.111Z,1516729352.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:32.501Z,1516729352.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:32.914Z,1516729352.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:33.309Z,1516729353.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:33.697Z,1516729353.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:34.120Z,1516729354.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:34.523Z,1516729354.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:34.920Z,1516729354.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:35.317Z,1516729355.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:35.714Z,1516729355.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:36.090Z,1516729356.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:36.493Z,1516729356.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:36.924Z,1516729356.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:37.319Z,1516729357.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:37.724Z,1516729357.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:38.124Z,1516729358.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:38.494Z,1516729358.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:38.897Z,1516729358.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:39.296Z,1516729359.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:39.704Z,1516729359.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:40.129Z,1516729360.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:40.504Z,1516729360.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:40.905Z,1516729360.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:41.298Z,1516729361.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:41.700Z,1516729361.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:42.105Z,1516729362.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:42.500Z,1516729362.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:42.900Z,1516729362.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:43.306Z,1516729363.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:43.713Z,1516729363.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:44.110Z,1516729364.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:44.499Z,1516729364.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:44.901Z,1516729364.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:45.301Z,1516729365.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:45.701Z,1516729365.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:46.113Z,1516729366.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:46.510Z,1516729366.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:46.910Z,1516729366.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:47.307Z,1516729367.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:47.713Z,1516729367.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:48.100Z,1516729368.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:48.512Z,1516729368.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:48.900Z,1516729368.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:49.309Z,1516729369.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:49.721Z,1516729369.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:50.110Z,1516729370.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:50.501Z,1516729370.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:50.901Z,1516729370.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:51.304Z,1516729371.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:51.707Z,1516729371.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:52.109Z,1516729372.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:52.112Z,1516729372.112 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:42:52.112Z,1516729372.112 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:42:52.112Z,1516729372.112 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:42:52.113Z,1516729372.113 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:42:52.521Z,1516729372.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:52.524Z,1516729372.524 [Default:CheckIn:D] Stopped 2018-01-23T17:42:52.524Z,1516729372.524 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:42:52.914Z,1516729372.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:52.922Z,1516729372.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 865.007747 min 2018-01-23T17:42:52.922Z,1516729372.922 [Default:CheckIn:E] Stopped 2018-01-23T17:42:52.922Z,1516729372.922 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:42:52.922Z,1516729372.922 [Default:CheckIn] Stopped 2018-01-23T17:42:52.927Z,1516729372.927 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:42:52.927Z,1516729372.927 [Default:CheckIn](INFO): Running loop #85 2018-01-23T17:42:52.927Z,1516729372.927 [Default:CheckIn] Running Loop=85 2018-01-23T17:42:52.927Z,1516729372.927 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:42:52.927Z,1516729372.927 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:42:53.305Z,1516729373.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:53.708Z,1516729373.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:56.800Z,1516729376.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:56.936Z,1516729376.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:57.300Z,1516729377.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:57.681Z,1516729377.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:58.077Z,1516729378.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:58.473Z,1516729378.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:58.868Z,1516729378.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:59.272Z,1516729379.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:42:59.667Z,1516729379.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:00.077Z,1516729380.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:00.485Z,1516729380.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:00.885Z,1516729380.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:01.275Z,1516729381.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:01.667Z,1516729381.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:02.069Z,1516729382.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:02.472Z,1516729382.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:02.873Z,1516729382.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:03.278Z,1516729383.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:03.688Z,1516729383.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:04.079Z,1516729384.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:04.477Z,1516729384.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:04.879Z,1516729384.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:05.272Z,1516729385.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:05.675Z,1516729385.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:06.080Z,1516729386.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:06.479Z,1516729386.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:06.879Z,1516729386.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:07.278Z,1516729387.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:07.669Z,1516729387.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:08.077Z,1516729388.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:08.471Z,1516729388.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:08.876Z,1516729388.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:09.288Z,1516729389.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:09.688Z,1516729389.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:10.080Z,1516729390.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:10.469Z,1516729390.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:10.876Z,1516729390.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:11.277Z,1516729391.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:11.676Z,1516729391.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:12.081Z,1516729392.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:12.483Z,1516729392.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:12.879Z,1516729392.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:13.280Z,1516729393.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:13.670Z,1516729393.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:14.074Z,1516729394.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:14.480Z,1516729394.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:14.869Z,1516729394.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:15.282Z,1516729395.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:15.688Z,1516729395.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:16.086Z,1516729396.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:16.460Z,1516729396.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:16.863Z,1516729396.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:17.265Z,1516729397.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:17.677Z,1516729397.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:18.082Z,1516729398.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:18.474Z,1516729398.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:18.873Z,1516729398.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:19.269Z,1516729399.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:19.680Z,1516729399.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:20.073Z,1516729400.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:20.470Z,1516729400.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:20.868Z,1516729400.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:21.279Z,1516729401.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:21.677Z,1516729401.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:22.089Z,1516729402.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:22.472Z,1516729402.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:22.872Z,1516729402.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:23.273Z,1516729403.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:23.679Z,1516729403.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:24.084Z,1516729404.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:24.479Z,1516729404.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:24.878Z,1516729404.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:25.270Z,1516729405.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:25.677Z,1516729405.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:26.077Z,1516729406.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:26.472Z,1516729406.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:26.869Z,1516729406.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:27.281Z,1516729407.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:27.688Z,1516729407.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:28.078Z,1516729408.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:28.469Z,1516729408.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:28.878Z,1516729408.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:29.275Z,1516729409.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:29.675Z,1516729409.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:30.081Z,1516729410.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:30.482Z,1516729410.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:30.879Z,1516729410.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:31.276Z,1516729411.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:31.675Z,1516729411.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:32.088Z,1516729412.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:32.482Z,1516729412.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:32.888Z,1516729412.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:32.890Z,1516729412.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:32.890Z,1516729412.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 288 2018-01-23T17:43:32.890Z,1516729412.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:43:32.910Z,1516729412.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:43:33.279Z,1516729413.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:33.292Z,1516729413.292 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:43:33.292Z,1516729413.292 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 288 2018-01-23T17:43:33.670Z,1516729413.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:33.672Z,1516729413.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:43:33.672Z,1516729413.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:43:33.673Z,1516729413.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:43:34.079Z,1516729414.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:34.481Z,1516729414.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:34.889Z,1516729414.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:35.274Z,1516729415.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:35.673Z,1516729415.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:36.081Z,1516729416.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:36.488Z,1516729416.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:36.877Z,1516729416.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:37.279Z,1516729417.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:37.669Z,1516729417.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:38.078Z,1516729418.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:38.488Z,1516729418.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:38.882Z,1516729418.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:39.275Z,1516729419.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:39.676Z,1516729419.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:40.078Z,1516729420.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:40.483Z,1516729420.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:40.889Z,1516729420.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:41.276Z,1516729421.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:41.679Z,1516729421.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:42.090Z,1516729422.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:42.481Z,1516729422.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:42.886Z,1516729422.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:43.281Z,1516729423.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:43.679Z,1516729423.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:44.087Z,1516729424.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:44.486Z,1516729424.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:44.882Z,1516729424.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:45.272Z,1516729425.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:45.685Z,1516729425.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:46.080Z,1516729426.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:46.492Z,1516729426.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:46.881Z,1516729426.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:47.285Z,1516729427.285 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:47.285Z,1516729427.285 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 288 2018-01-23T17:43:47.285Z,1516729427.285 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:43:47.291Z,1516729427.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:47.291Z,1516729427.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 288 2018-01-23T17:43:47.291Z,1516729427.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:43:47.313Z,1516729427.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:43:47.313Z,1516729427.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:43:47.702Z,1516729427.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:43:47.702Z,1516729427.702 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 288 2018-01-23T17:43:47.702Z,1516729427.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:43:47.703Z,1516729427.703 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 288 2018-01-23T17:43:48.093Z,1516729428.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:43:48.093Z,1516729428.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:43:48.093Z,1516729428.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:43:48.094Z,1516729428.094 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:43:48.094Z,1516729428.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:43:48.095Z,1516729428.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:43:48.496Z,1516729428.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:43:48.497Z,1516729428.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:48.889Z,1516729428.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:43:48.890Z,1516729428.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:49.290Z,1516729429.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:43:49.292Z,1516729429.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:49.686Z,1516729429.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:43:49.687Z,1516729429.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:50.092Z,1516729430.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:43:50.093Z,1516729430.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:50.493Z,1516729430.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:43:50.494Z,1516729430.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:50.893Z,1516729430.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:43:50.894Z,1516729430.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:51.270Z,1516729431.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:43:51.271Z,1516729431.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:51.666Z,1516729431.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:43:51.667Z,1516729431.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:52.078Z,1516729432.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:43:52.091Z,1516729432.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:52.481Z,1516729432.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:43:52.482Z,1516729432.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:52.880Z,1516729432.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:43:52.881Z,1516729432.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:53.274Z,1516729433.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:43:53.275Z,1516729433.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:53.672Z,1516729433.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:43:53.673Z,1516729433.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:54.084Z,1516729434.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:43:54.085Z,1516729434.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:57.184Z,1516729437.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T17:43:57.185Z,1516729437.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:57.332Z,1516729437.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:43:57.333Z,1516729437.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:57.678Z,1516729437.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:43:57.679Z,1516729437.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:58.084Z,1516729438.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:43:58.085Z,1516729438.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:58.482Z,1516729438.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:43:58.483Z,1516729438.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:58.877Z,1516729438.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:43:58.878Z,1516729438.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:59.291Z,1516729439.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:43:59.292Z,1516729439.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:43:59.693Z,1516729439.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:43:59.694Z,1516729439.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:00.088Z,1516729440.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:44:00.089Z,1516729440.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:00.484Z,1516729440.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:44:00.485Z,1516729440.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:00.884Z,1516729440.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:44:00.885Z,1516729440.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:01.288Z,1516729441.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:44:01.289Z,1516729441.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:01.677Z,1516729441.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:44:01.678Z,1516729441.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:02.089Z,1516729442.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:44:02.090Z,1516729442.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:02.490Z,1516729442.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:44:02.491Z,1516729442.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:02.897Z,1516729442.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:44:02.898Z,1516729442.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:03.284Z,1516729443.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:44:03.285Z,1516729443.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:03.687Z,1516729443.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:44:03.688Z,1516729443.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:04.087Z,1516729444.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:44:04.088Z,1516729444.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:04.494Z,1516729444.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:44:04.499Z,1516729444.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:04.892Z,1516729444.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:44:04.893Z,1516729444.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:05.283Z,1516729445.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:44:05.284Z,1516729445.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:05.684Z,1516729445.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:44:05.685Z,1516729445.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:06.089Z,1516729446.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:44:06.089Z,1516729446.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:06.489Z,1516729446.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:44:06.490Z,1516729446.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:06.888Z,1516729446.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:44:06.889Z,1516729446.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:07.288Z,1516729447.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:07.687Z,1516729447.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:08.095Z,1516729448.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:08.496Z,1516729448.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:08.890Z,1516729448.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:09.280Z,1516729449.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:09.696Z,1516729449.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:10.097Z,1516729450.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:10.499Z,1516729450.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:10.896Z,1516729450.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:11.268Z,1516729451.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:11.693Z,1516729451.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:12.101Z,1516729452.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:12.505Z,1516729452.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:12.898Z,1516729452.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:13.276Z,1516729453.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:13.673Z,1516729453.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:14.102Z,1516729454.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:14.507Z,1516729454.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:14.903Z,1516729454.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:15.276Z,1516729455.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:15.676Z,1516729455.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:16.081Z,1516729456.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:16.482Z,1516729456.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:16.881Z,1516729456.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:17.282Z,1516729457.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:17.675Z,1516729457.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:18.075Z,1516729458.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:18.477Z,1516729458.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:18.878Z,1516729458.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:19.281Z,1516729459.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:19.694Z,1516729459.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:20.089Z,1516729460.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:20.480Z,1516729460.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:20.885Z,1516729460.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:21.288Z,1516729461.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:21.676Z,1516729461.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:22.085Z,1516729462.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:22.440Z,1516729462.440 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T17:44:22.440Z,1516729462.440 [NAL9602] Data Fault, FailCount= 4 2018-01-23T17:44:22.440Z,1516729462.440 [NAL9602](ERROR): Data Fault 2018-01-23T17:44:22.491Z,1516729462.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:22.516Z,1516729462.516 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T17:44:22.844Z,1516729462.844 [NAL9602](INFO): Powering down 2018-01-23T17:44:22.888Z,1516729462.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:23.285Z,1516729463.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:23.680Z,1516729463.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:23.693Z,1516729463.693 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:44:23.693Z,1516729463.693 [NAL9602] No Fault, FailCount= 4 2018-01-23T17:44:24.082Z,1516729464.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:24.477Z,1516729464.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:24.877Z,1516729464.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:25.281Z,1516729465.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:25.678Z,1516729465.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:26.081Z,1516729466.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:26.484Z,1516729466.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:26.878Z,1516729466.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:27.266Z,1516729467.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:27.666Z,1516729467.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:28.073Z,1516729468.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:28.475Z,1516729468.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:28.870Z,1516729468.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:29.272Z,1516729469.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:29.701Z,1516729469.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:30.070Z,1516729470.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:30.475Z,1516729470.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:30.879Z,1516729470.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:31.272Z,1516729471.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:31.678Z,1516729471.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:32.081Z,1516729472.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:32.477Z,1516729472.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:32.881Z,1516729472.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:33.281Z,1516729473.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:33.678Z,1516729473.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:34.078Z,1516729474.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:34.478Z,1516729474.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:34.876Z,1516729474.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:34.908Z,1516729474.908 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:44:35.279Z,1516729475.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:35.685Z,1516729475.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:36.077Z,1516729476.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:36.475Z,1516729476.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:36.881Z,1516729476.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:37.275Z,1516729477.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:37.674Z,1516729477.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:38.089Z,1516729478.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:38.476Z,1516729478.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:38.876Z,1516729478.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:39.275Z,1516729479.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:39.674Z,1516729479.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:40.072Z,1516729480.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:40.481Z,1516729480.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:40.879Z,1516729480.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:41.279Z,1516729481.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:41.677Z,1516729481.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:42.074Z,1516729482.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:42.472Z,1516729482.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:42.877Z,1516729482.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:43.274Z,1516729483.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:43.672Z,1516729483.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:44.077Z,1516729484.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:44.474Z,1516729484.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:44.872Z,1516729484.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:45.288Z,1516729485.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:45.678Z,1516729485.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:46.072Z,1516729486.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:46.485Z,1516729486.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:46.874Z,1516729486.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:47.274Z,1516729487.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:47.676Z,1516729487.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:48.074Z,1516729488.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:48.472Z,1516729488.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:48.875Z,1516729488.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:49.274Z,1516729489.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:49.672Z,1516729489.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:50.075Z,1516729490.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:50.481Z,1516729490.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:50.872Z,1516729490.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:51.285Z,1516729491.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:51.678Z,1516729491.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:52.072Z,1516729492.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:52.477Z,1516729492.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:52.874Z,1516729492.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:53.236Z,1516729493.236 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:44:53.281Z,1516729493.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:53.677Z,1516729493.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:54.075Z,1516729494.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:57.168Z,1516729497.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:57.281Z,1516729497.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:57.634Z,1516729497.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:58.038Z,1516729498.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:58.445Z,1516729498.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:58.862Z,1516729498.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:59.230Z,1516729499.230 [PNI_TCM](ERROR): CRC does not match. Expected:0x21141 got:0x57115 2018-01-23T17:44:59.249Z,1516729499.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:44:59.638Z,1516729499.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:00.038Z,1516729500.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:00.445Z,1516729500.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:00.833Z,1516729500.833 [PNI_TCM](ERROR): CRC does not match. Expected:0x49283 got:0x45124 2018-01-23T17:45:00.872Z,1516729500.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:01.239Z,1516729501.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:01.637Z,1516729501.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:02.058Z,1516729502.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:02.430Z,1516729502.430 [PNI_TCM](ERROR): CRC does not match. Expected:0x4693 got:0x28798 2018-01-23T17:45:02.464Z,1516729502.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:02.840Z,1516729502.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:03.242Z,1516729503.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:03.664Z,1516729503.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:04.037Z,1516729504.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x1340 got:0x16881 2018-01-23T17:45:04.066Z,1516729504.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:04.396Z,1516729504.396 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:45:04.444Z,1516729504.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:04.838Z,1516729504.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:05.272Z,1516729505.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:05.641Z,1516729505.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x50934 got:0x16839 2018-01-23T17:45:05.680Z,1516729505.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:06.048Z,1516729506.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:06.443Z,1516729506.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:06.857Z,1516729506.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:07.241Z,1516729507.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:07.641Z,1516729507.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:08.049Z,1516729508.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:08.469Z,1516729508.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:08.843Z,1516729508.843 [PNI_TCM](ERROR): CRC does not match. Expected:0x4703 got:0x6210 2018-01-23T17:45:08.869Z,1516729508.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:09.249Z,1516729509.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:09.654Z,1516729509.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:10.057Z,1516729510.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:10.447Z,1516729510.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:10.846Z,1516729510.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:11.255Z,1516729511.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:11.682Z,1516729511.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:12.051Z,1516729512.051 [PNI_TCM](ERROR): CRC does not match. Expected:0x48411 got:0x6466 2018-01-23T17:45:12.085Z,1516729512.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:12.450Z,1516729512.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:12.853Z,1516729512.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:13.252Z,1516729513.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:13.652Z,1516729513.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:14.054Z,1516729514.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:14.454Z,1516729514.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:14.860Z,1516729514.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:15.242Z,1516729515.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:15.644Z,1516729515.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:16.056Z,1516729516.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:16.448Z,1516729516.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:16.833Z,1516729516.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:17.262Z,1516729517.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:17.665Z,1516729517.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:18.064Z,1516729518.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:18.431Z,1516729518.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:18.828Z,1516729518.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:19.237Z,1516729519.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:19.643Z,1516729519.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:20.038Z,1516729520.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:20.446Z,1516729520.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:20.872Z,1516729520.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:21.265Z,1516729521.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:21.634Z,1516729521.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:22.036Z,1516729522.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:22.437Z,1516729522.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:22.841Z,1516729522.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:23.242Z,1516729523.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:23.652Z,1516729523.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:24.048Z,1516729524.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:24.436Z,1516729524.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:24.836Z,1516729524.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:25.238Z,1516729525.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:25.644Z,1516729525.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:26.055Z,1516729526.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:26.453Z,1516729526.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:26.846Z,1516729526.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:27.248Z,1516729527.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:27.645Z,1516729527.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:28.043Z,1516729528.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:28.438Z,1516729528.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:28.837Z,1516729528.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:29.252Z,1516729529.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:29.649Z,1516729529.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:30.046Z,1516729530.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:30.435Z,1516729530.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:30.841Z,1516729530.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:31.237Z,1516729531.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:31.645Z,1516729531.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:32.053Z,1516729532.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:32.450Z,1516729532.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:32.852Z,1516729532.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:33.245Z,1516729533.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:33.643Z,1516729533.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:34.049Z,1516729534.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:34.447Z,1516729534.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:34.845Z,1516729534.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:35.259Z,1516729535.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:35.658Z,1516729535.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:36.062Z,1516729536.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:36.436Z,1516729536.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:36.841Z,1516729536.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:37.237Z,1516729537.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:37.635Z,1516729537.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:38.038Z,1516729538.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:38.442Z,1516729538.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:38.838Z,1516729538.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:39.234Z,1516729539.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:39.641Z,1516729539.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:40.036Z,1516729540.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:40.437Z,1516729540.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:40.834Z,1516729540.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:41.241Z,1516729541.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:41.654Z,1516729541.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:42.045Z,1516729542.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:42.436Z,1516729542.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:42.835Z,1516729542.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:43.244Z,1516729543.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:43.636Z,1516729543.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:44.041Z,1516729544.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:44.442Z,1516729544.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:44.877Z,1516729544.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:45.240Z,1516729545.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:45.641Z,1516729545.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:46.040Z,1516729546.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:46.439Z,1516729546.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:46.836Z,1516729546.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:47.252Z,1516729547.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:47.643Z,1516729547.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:48.049Z,1516729548.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:48.441Z,1516729548.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:48.847Z,1516729548.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:49.240Z,1516729549.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:49.645Z,1516729549.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:50.057Z,1516729550.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:50.457Z,1516729550.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:50.855Z,1516729550.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:51.250Z,1516729551.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:51.645Z,1516729551.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:52.049Z,1516729552.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:52.449Z,1516729552.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:52.845Z,1516729552.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:53.249Z,1516729553.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:53.652Z,1516729553.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:54.052Z,1516729554.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:54.446Z,1516729554.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:57.534Z,1516729557.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:57.690Z,1516729557.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:58.013Z,1516729558.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:58.413Z,1516729558.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:58.813Z,1516729558.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:59.209Z,1516729559.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:45:59.603Z,1516729559.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:00.010Z,1516729560.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:00.413Z,1516729560.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:00.820Z,1516729560.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:01.207Z,1516729561.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:01.607Z,1516729561.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:02.010Z,1516729562.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:02.421Z,1516729562.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:02.810Z,1516729562.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:03.209Z,1516729563.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:03.608Z,1516729563.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:04.010Z,1516729564.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:04.414Z,1516729564.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:04.810Z,1516729564.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:05.204Z,1516729565.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:05.611Z,1516729565.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:06.011Z,1516729566.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:06.413Z,1516729566.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:06.817Z,1516729566.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:07.202Z,1516729567.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:07.607Z,1516729567.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:08.010Z,1516729568.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:08.413Z,1516729568.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:08.810Z,1516729568.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:09.202Z,1516729569.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:09.608Z,1516729569.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:10.014Z,1516729570.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:10.422Z,1516729570.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:10.810Z,1516729570.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:11.205Z,1516729571.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:11.602Z,1516729571.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:12.010Z,1516729572.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:12.425Z,1516729572.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:12.809Z,1516729572.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:13.209Z,1516729573.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:13.608Z,1516729573.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:14.005Z,1516729574.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:14.414Z,1516729574.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:14.815Z,1516729574.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:15.216Z,1516729575.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:15.597Z,1516729575.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:16.011Z,1516729576.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:16.412Z,1516729576.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:16.848Z,1516729576.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:17.214Z,1516729577.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:17.615Z,1516729577.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:18.019Z,1516729578.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:18.411Z,1516729578.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:18.812Z,1516729578.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:19.211Z,1516729579.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:19.604Z,1516729579.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:19.991Z,1516729579.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:20.418Z,1516729580.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:20.829Z,1516729580.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:21.228Z,1516729581.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:21.592Z,1516729581.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:22.021Z,1516729582.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:22.404Z,1516729582.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:22.801Z,1516729582.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:23.207Z,1516729583.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:23.631Z,1516729583.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:24.003Z,1516729584.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:24.398Z,1516729584.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:24.804Z,1516729584.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:25.199Z,1516729585.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:25.600Z,1516729585.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:26.004Z,1516729586.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:26.402Z,1516729586.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:26.806Z,1516729586.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:27.202Z,1516729587.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:27.608Z,1516729587.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:28.006Z,1516729588.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:28.401Z,1516729588.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:28.801Z,1516729588.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:29.217Z,1516729589.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:29.614Z,1516729589.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:30.017Z,1516729590.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:30.401Z,1516729590.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:30.804Z,1516729590.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:31.202Z,1516729591.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:31.610Z,1516729591.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:31.000Z,1516729592.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:32.415Z,1516729592.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:32.813Z,1516729592.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:33.210Z,1516729593.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:33.601Z,1516729593.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:34.058Z,1516729594.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:34.061Z,1516729594.061 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:34.061Z,1516729594.061 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 289 2018-01-23T17:46:34.061Z,1516729594.061 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:46:34.081Z,1516729594.081 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:46:34.434Z,1516729594.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:34.483Z,1516729594.483 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:46:34.483Z,1516729594.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 289 2018-01-23T17:46:34.824Z,1516729594.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:34.826Z,1516729594.826 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:46:34.826Z,1516729594.826 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:46:34.831Z,1516729594.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:46:35.225Z,1516729595.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:35.688Z,1516729595.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:36.022Z,1516729596.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:36.421Z,1516729596.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:36.834Z,1516729596.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:37.200Z,1516729597.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:37.608Z,1516729597.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:38.020Z,1516729598.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:38.456Z,1516729598.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:38.821Z,1516729598.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:39.224Z,1516729599.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:39.615Z,1516729599.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:40.010Z,1516729600.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:40.437Z,1516729600.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:40.835Z,1516729600.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:41.276Z,1516729601.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:41.641Z,1516729601.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:42.029Z,1516729602.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:42.445Z,1516729602.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:42.871Z,1516729602.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:43.213Z,1516729603.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:43.610Z,1516729603.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:44.026Z,1516729604.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:44.417Z,1516729604.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:44.824Z,1516729604.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:45.258Z,1516729605.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:45.622Z,1516729605.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:46.021Z,1516729606.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:46.438Z,1516729606.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:46.808Z,1516729606.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:47.241Z,1516729607.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:47.638Z,1516729607.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:48.037Z,1516729608.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:48.447Z,1516729608.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:48.447Z,1516729608.447 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 289 2018-01-23T17:46:48.447Z,1516729608.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:46:48.449Z,1516729608.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:48.449Z,1516729608.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 289 2018-01-23T17:46:48.449Z,1516729608.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:46:48.474Z,1516729608.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:46:48.495Z,1516729608.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:46:48.873Z,1516729608.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:46:48.873Z,1516729608.873 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 289 2018-01-23T17:46:48.874Z,1516729608.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:46:48.874Z,1516729608.874 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 289 2018-01-23T17:46:49.205Z,1516729609.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:46:49.206Z,1516729609.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:46:49.206Z,1516729609.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:46:49.211Z,1516729609.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:46:49.212Z,1516729609.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:46:49.212Z,1516729609.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:46:49.617Z,1516729609.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:46:49.618Z,1516729609.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:50.028Z,1516729610.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:46:50.029Z,1516729610.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:50.426Z,1516729610.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:46:50.431Z,1516729610.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:50.828Z,1516729610.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:46:50.829Z,1516729610.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:51.261Z,1516729611.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:46:51.262Z,1516729611.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:51.601Z,1516729611.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:46:51.602Z,1516729611.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:52.041Z,1516729612.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:46:52.042Z,1516729612.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:52.402Z,1516729612.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:46:52.439Z,1516729612.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:52.829Z,1516729612.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:46:52.830Z,1516729612.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:53.238Z,1516729613.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:46:53.244Z,1516729613.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:53.643Z,1516729613.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:46:53.644Z,1516729613.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:54.052Z,1516729614.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:46:54.053Z,1516729614.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:54.430Z,1516729614.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:46:54.467Z,1516729614.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:54.829Z,1516729614.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:46:54.830Z,1516729614.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:57.923Z,1516729617.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T17:46:57.924Z,1516729617.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:58.068Z,1516729618.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:46:58.069Z,1516729618.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:58.450Z,1516729618.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:46:58.451Z,1516729618.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:58.846Z,1516729618.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:46:58.847Z,1516729618.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:59.229Z,1516729619.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:46:59.230Z,1516729619.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:46:59.621Z,1516729619.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:46:59.621Z,1516729619.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:00.020Z,1516729620.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:47:00.021Z,1516729620.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:00.418Z,1516729620.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:47:00.420Z,1516729620.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:00.830Z,1516729620.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:47:00.831Z,1516729620.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:01.222Z,1516729621.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:47:01.223Z,1516729621.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:01.625Z,1516729621.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:47:01.626Z,1516729621.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:02.022Z,1516729622.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:47:02.023Z,1516729622.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:02.420Z,1516729622.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:47:02.421Z,1516729622.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:02.822Z,1516729622.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:47:02.824Z,1516729622.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:03.218Z,1516729623.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:47:03.219Z,1516729623.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:03.620Z,1516729623.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:47:03.621Z,1516729623.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:04.024Z,1516729624.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:47:04.025Z,1516729624.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:04.425Z,1516729624.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:47:04.426Z,1516729624.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:04.826Z,1516729624.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:47:04.827Z,1516729624.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:05.226Z,1516729625.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:47:05.227Z,1516729625.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:05.620Z,1516729625.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:47:05.620Z,1516729625.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:06.020Z,1516729626.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:47:06.021Z,1516729626.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:06.426Z,1516729626.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:47:06.432Z,1516729626.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:06.823Z,1516729626.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:47:06.824Z,1516729626.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:07.230Z,1516729627.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:47:07.231Z,1516729627.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:07.636Z,1516729627.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:47:07.637Z,1516729627.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:08.030Z,1516729628.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:47:08.031Z,1516729628.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:08.422Z,1516729628.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T17:47:08.423Z,1516729628.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:08.833Z,1516729628.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:09.225Z,1516729629.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:09.624Z,1516729629.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:10.033Z,1516729630.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:10.434Z,1516729630.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:10.835Z,1516729630.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:11.244Z,1516729631.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:11.621Z,1516729631.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:12.028Z,1516729632.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:12.541Z,1516729632.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:12.820Z,1516729632.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:13.232Z,1516729633.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:13.634Z,1516729633.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:14.040Z,1516729634.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:14.431Z,1516729634.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:14.823Z,1516729634.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:15.224Z,1516729635.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:15.625Z,1516729635.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:16.021Z,1516729636.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:16.426Z,1516729636.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:16.830Z,1516729636.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:17.226Z,1516729637.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:17.623Z,1516729637.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:18.011Z,1516729638.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:18.412Z,1516729638.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:18.814Z,1516729638.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:19.238Z,1516729639.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:19.650Z,1516729639.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:20.043Z,1516729640.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:20.419Z,1516729640.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:20.817Z,1516729640.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:21.215Z,1516729641.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:21.620Z,1516729641.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:22.019Z,1516729642.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:22.425Z,1516729642.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:22.830Z,1516729642.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:23.222Z,1516729643.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:23.624Z,1516729643.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:24.024Z,1516729644.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:24.421Z,1516729644.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:24.819Z,1516729644.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:25.226Z,1516729645.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:25.626Z,1516729645.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:26.024Z,1516729646.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:26.424Z,1516729646.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:26.825Z,1516729646.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:27.224Z,1516729647.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:27.628Z,1516729647.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:28.019Z,1516729648.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:28.428Z,1516729648.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:28.830Z,1516729648.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:29.226Z,1516729649.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:29.629Z,1516729649.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:30.020Z,1516729650.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:30.421Z,1516729650.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:30.818Z,1516729650.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:31.225Z,1516729651.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:31.626Z,1516729651.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:32.024Z,1516729652.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:32.420Z,1516729652.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:32.827Z,1516729652.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:33.218Z,1516729653.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:33.622Z,1516729653.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:34.025Z,1516729654.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:34.426Z,1516729654.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:34.826Z,1516729654.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:35.229Z,1516729655.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:35.620Z,1516729655.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:36.029Z,1516729656.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:36.429Z,1516729656.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:36.821Z,1516729656.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:37.226Z,1516729657.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:37.630Z,1516729657.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:38.032Z,1516729658.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:38.424Z,1516729658.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:38.825Z,1516729658.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:39.218Z,1516729659.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:39.622Z,1516729659.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:40.025Z,1516729660.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:40.430Z,1516729660.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:40.830Z,1516729660.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:41.227Z,1516729661.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:41.619Z,1516729661.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:42.021Z,1516729662.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:42.422Z,1516729662.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:42.821Z,1516729662.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:43.227Z,1516729663.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:43.627Z,1516729663.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:44.033Z,1516729664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:44.424Z,1516729664.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:44.820Z,1516729664.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:45.220Z,1516729665.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:45.628Z,1516729665.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:46.023Z,1516729666.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:46.430Z,1516729666.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:46.834Z,1516729666.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:47.230Z,1516729667.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:47.621Z,1516729667.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:48.030Z,1516729668.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:48.426Z,1516729668.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:48.840Z,1516729668.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:49.235Z,1516729669.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:49.636Z,1516729669.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:50.034Z,1516729670.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:50.431Z,1516729670.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:50.833Z,1516729670.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:51.233Z,1516729671.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:51.633Z,1516729671.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:52.031Z,1516729672.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:52.441Z,1516729672.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:52.841Z,1516729672.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:53.239Z,1516729673.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:53.243Z,1516729673.243 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:42:52.9Z 2018-01-23T17:47:53.243Z,1516729673.243 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:47:53.243Z,1516729673.243 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:47:53.631Z,1516729673.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:54.147Z,1516729674.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:54.431Z,1516729674.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:57.533Z,1516729677.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:57.616Z,1516729677.616 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0340.lzma 2018-01-23T17:47:57.690Z,1516729677.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:58.006Z,1516729678.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:47:58.362Z,1516729678.362 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0340.lzma.bak 2018-01-23T17:47:58.362Z,1516729678.362 [DataOverHttps](INFO): SBD MOMSN=7756248 2018-01-23T17:47:58.436Z,1516729678.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:00.062Z,1516729680.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:00.209Z,1516729680.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:03.262Z,1516729683.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:03.417Z,1516729683.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:03.785Z,1516729683.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:04.191Z,1516729684.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:04.566Z,1516729684.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:04.965Z,1516729684.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:08.090Z,1516729688.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:08.178Z,1516729688.178 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0341.lzma 2018-01-23T17:48:08.246Z,1516729688.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:08.569Z,1516729688.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:08.914Z,1516729688.914 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0341.lzma.bak 2018-01-23T17:48:08.914Z,1516729688.914 [DataOverHttps](INFO): SBD MOMSN=7756250 2018-01-23T17:48:08.971Z,1516729688.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:09.607Z,1516729689.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:09.610Z,1516729689.610 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:48:09.610Z,1516729689.610 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:48:09.611Z,1516729689.611 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:48:09.786Z,1516729689.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:12.866Z,1516729692.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:13.017Z,1516729693.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:13.367Z,1516729693.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:13.765Z,1516729693.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:14.159Z,1516729694.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:14.567Z,1516729694.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:14.968Z,1516729694.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:15.371Z,1516729695.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:15.773Z,1516729695.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:16.170Z,1516729696.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:16.560Z,1516729696.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:16.962Z,1516729696.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:17.365Z,1516729697.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:17.763Z,1516729697.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:18.170Z,1516729698.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:18.576Z,1516729698.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:18.970Z,1516729698.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:19.373Z,1516729699.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:19.764Z,1516729699.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:20.160Z,1516729700.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:20.571Z,1516729700.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:20.960Z,1516729700.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:21.370Z,1516729701.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:21.774Z,1516729701.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:22.176Z,1516729702.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:22.562Z,1516729702.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:22.971Z,1516729702.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:23.365Z,1516729703.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:23.765Z,1516729703.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:24.170Z,1516729704.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:24.571Z,1516729704.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:24.970Z,1516729704.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:25.370Z,1516729705.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:25.769Z,1516729705.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:26.162Z,1516729706.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:26.572Z,1516729706.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:26.966Z,1516729706.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:27.372Z,1516729707.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:27.784Z,1516729707.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:28.172Z,1516729708.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:28.561Z,1516729708.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:28.965Z,1516729708.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:29.369Z,1516729709.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:29.772Z,1516729709.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:30.169Z,1516729710.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:30.585Z,1516729710.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:30.982Z,1516729710.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:31.382Z,1516729711.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:31.753Z,1516729711.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:32.153Z,1516729712.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:32.581Z,1516729712.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:32.989Z,1516729712.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:33.368Z,1516729713.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:33.789Z,1516729713.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:34.192Z,1516729714.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:34.561Z,1516729714.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:34.965Z,1516729714.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:35.374Z,1516729715.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:35.765Z,1516729715.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:36.165Z,1516729716.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:36.659Z,1516729716.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:36.971Z,1516729716.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:37.372Z,1516729717.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:37.765Z,1516729717.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:38.165Z,1516729718.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:38.562Z,1516729718.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:38.962Z,1516729718.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:39.418Z,1516729719.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:39.766Z,1516729719.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:40.171Z,1516729720.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:40.557Z,1516729720.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:40.954Z,1516729720.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:41.430Z,1516729721.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:41.762Z,1516729721.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:42.183Z,1516729722.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:42.587Z,1516729722.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:42.979Z,1516729722.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:43.389Z,1516729723.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:43.773Z,1516729723.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:44.181Z,1516729724.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:44.557Z,1516729724.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:44.970Z,1516729724.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:45.396Z,1516729725.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:45.767Z,1516729725.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:46.168Z,1516729726.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:46.565Z,1516729726.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:46.959Z,1516729726.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:47.360Z,1516729727.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:47.767Z,1516729727.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:48.165Z,1516729728.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:48.577Z,1516729728.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:48.981Z,1516729728.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:49.373Z,1516729729.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:49.761Z,1516729729.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:50.162Z,1516729730.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:50.562Z,1516729730.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:50.965Z,1516729730.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:51.370Z,1516729731.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:51.773Z,1516729731.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:52.170Z,1516729732.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:52.561Z,1516729732.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:52.970Z,1516729732.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:53.360Z,1516729733.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:53.765Z,1516729733.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:54.168Z,1516729734.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:54.570Z,1516729734.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:54.973Z,1516729734.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:55.370Z,1516729735.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:55.768Z,1516729735.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:56.169Z,1516729736.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:56.562Z,1516729736.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:56.965Z,1516729736.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:57.370Z,1516729737.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:57.773Z,1516729737.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:58.170Z,1516729738.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:58.561Z,1516729738.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:58.965Z,1516729738.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:59.364Z,1516729739.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:48:59.765Z,1516729739.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:00.169Z,1516729740.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:00.576Z,1516729740.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:00.981Z,1516729740.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:01.370Z,1516729741.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:01.769Z,1516729741.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:02.173Z,1516729742.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:02.566Z,1516729742.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:02.963Z,1516729742.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:03.377Z,1516729743.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:03.775Z,1516729743.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:04.182Z,1516729744.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:04.562Z,1516729744.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:04.961Z,1516729744.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:05.377Z,1516729745.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:05.753Z,1516729745.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:06.153Z,1516729746.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:06.582Z,1516729746.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:06.989Z,1516729746.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:07.393Z,1516729747.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:07.755Z,1516729747.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:08.161Z,1516729748.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:08.565Z,1516729748.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:08.961Z,1516729748.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:09.389Z,1516729749.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:09.770Z,1516729749.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:10.174Z,1516729750.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:13.295Z,1516729753.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:13.401Z,1516729753.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:13.796Z,1516729753.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:14.196Z,1516729754.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:14.601Z,1516729754.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:14.976Z,1516729754.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:15.377Z,1516729755.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:15.774Z,1516729755.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:16.173Z,1516729756.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:16.603Z,1516729756.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:17.003Z,1516729757.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:17.378Z,1516729757.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:17.773Z,1516729757.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:18.174Z,1516729758.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:18.575Z,1516729758.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:18.974Z,1516729758.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:19.377Z,1516729759.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:19.780Z,1516729759.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:20.177Z,1516729760.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:20.573Z,1516729760.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:20.978Z,1516729760.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:21.377Z,1516729761.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:21.776Z,1516729761.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:22.176Z,1516729762.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:22.585Z,1516729762.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:22.983Z,1516729762.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:23.378Z,1516729763.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:23.781Z,1516729763.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:24.187Z,1516729764.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:24.574Z,1516729764.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:24.968Z,1516729764.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:25.393Z,1516729765.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:25.787Z,1516729765.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:26.184Z,1516729766.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:26.579Z,1516729766.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:26.977Z,1516729766.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:27.377Z,1516729767.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:27.780Z,1516729767.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:28.176Z,1516729768.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:28.586Z,1516729768.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:28.987Z,1516729768.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:29.383Z,1516729769.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:29.773Z,1516729769.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:30.180Z,1516729770.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:30.584Z,1516729770.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:30.980Z,1516729770.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:31.393Z,1516729771.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:31.787Z,1516729771.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:32.193Z,1516729772.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:32.573Z,1516729772.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:32.984Z,1516729772.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:33.378Z,1516729773.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:33.781Z,1516729773.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:34.179Z,1516729774.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:34.585Z,1516729774.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:34.993Z,1516729774.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:34.995Z,1516729774.995 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:34.995Z,1516729774.995 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 290 2018-01-23T17:49:34.995Z,1516729774.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:49:35.023Z,1516729775.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:49:35.383Z,1516729775.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:35.395Z,1516729775.395 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:49:35.396Z,1516729775.396 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 290 2018-01-23T17:49:35.784Z,1516729775.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:35.785Z,1516729775.785 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:49:35.785Z,1516729775.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:49:35.786Z,1516729775.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:49:36.180Z,1516729776.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:36.588Z,1516729776.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:36.961Z,1516729776.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:37.386Z,1516729777.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:37.798Z,1516729777.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:38.192Z,1516729778.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:38.564Z,1516729778.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:38.967Z,1516729778.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:39.393Z,1516729779.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:39.796Z,1516729779.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:40.193Z,1516729780.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:40.564Z,1516729780.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:40.973Z,1516729780.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:41.402Z,1516729781.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:41.798Z,1516729781.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:42.195Z,1516729782.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:42.571Z,1516729782.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:42.970Z,1516729782.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:43.372Z,1516729783.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:43.789Z,1516729783.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:44.173Z,1516729784.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:44.578Z,1516729784.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:44.981Z,1516729784.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:45.375Z,1516729785.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:45.771Z,1516729785.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:46.182Z,1516729786.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:46.572Z,1516729786.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:46.973Z,1516729786.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:47.378Z,1516729787.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:47.785Z,1516729787.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:48.178Z,1516729788.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:48.574Z,1516729788.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:48.972Z,1516729788.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:49.379Z,1516729789.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:49.379Z,1516729789.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 290 2018-01-23T17:49:49.379Z,1516729789.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:49:49.381Z,1516729789.381 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:49.381Z,1516729789.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 290 2018-01-23T17:49:49.381Z,1516729789.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:49:49.410Z,1516729789.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:49:49.410Z,1516729789.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:49:49.823Z,1516729789.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:49:49.823Z,1516729789.823 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 290 2018-01-23T17:49:49.824Z,1516729789.824 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:49:49.824Z,1516729789.824 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 290 2018-01-23T17:49:50.181Z,1516729790.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:49:50.182Z,1516729790.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:49:50.182Z,1516729790.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:49:50.183Z,1516729790.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:49:50.183Z,1516729790.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:49:50.184Z,1516729790.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:49:50.585Z,1516729790.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:49:50.585Z,1516729790.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:50.984Z,1516729790.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:49:50.985Z,1516729790.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:51.392Z,1516729791.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:49:51.393Z,1516729791.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:51.787Z,1516729791.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:49:51.788Z,1516729791.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:52.191Z,1516729792.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:49:52.192Z,1516729792.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:52.575Z,1516729792.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:49:52.576Z,1516729792.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:52.988Z,1516729792.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:49:52.989Z,1516729792.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:53.384Z,1516729793.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:49:53.385Z,1516729793.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:53.795Z,1516729793.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:49:53.796Z,1516729793.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:54.187Z,1516729794.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:49:54.188Z,1516729794.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:54.576Z,1516729794.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:49:54.577Z,1516729794.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:54.980Z,1516729794.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:49:54.981Z,1516729794.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:55.395Z,1516729795.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:49:55.396Z,1516729795.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:55.790Z,1516729795.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:49:55.791Z,1516729795.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:56.184Z,1516729796.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:49:56.185Z,1516729796.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:56.575Z,1516729796.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:49:56.576Z,1516729796.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:56.983Z,1516729796.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:49:56.984Z,1516729796.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:57.389Z,1516729797.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:49:57.390Z,1516729797.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:57.790Z,1516729797.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:49:57.795Z,1516729797.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:58.188Z,1516729798.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:49:58.189Z,1516729798.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:58.576Z,1516729798.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:49:58.577Z,1516729798.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:58.982Z,1516729798.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:49:58.983Z,1516729798.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:59.402Z,1516729799.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:49:59.403Z,1516729799.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:49:59.794Z,1516729799.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:49:59.799Z,1516729799.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:00.186Z,1516729800.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:50:00.187Z,1516729800.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:00.589Z,1516729800.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:50:00.590Z,1516729800.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:00.965Z,1516729800.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:50:00.966Z,1516729800.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:01.396Z,1516729801.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:50:01.397Z,1516729801.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:01.800Z,1516729801.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:50:01.801Z,1516729801.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:02.198Z,1516729802.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:50:02.199Z,1516729802.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:02.589Z,1516729802.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:50:02.590Z,1516729802.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:02.968Z,1516729802.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:50:02.969Z,1516729802.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:03.404Z,1516729803.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:50:03.405Z,1516729803.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:03.808Z,1516729803.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:50:03.809Z,1516729803.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:04.204Z,1516729804.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:50:04.205Z,1516729804.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:04.576Z,1516729804.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:50:04.577Z,1516729804.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:04.972Z,1516729804.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:50:04.973Z,1516729804.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:05.377Z,1516729805.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:50:05.378Z,1516729805.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:05.784Z,1516729805.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:50:05.785Z,1516729805.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:06.180Z,1516729806.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:50:06.181Z,1516729806.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:06.575Z,1516729806.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:50:06.576Z,1516729806.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:06.970Z,1516729806.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:50:06.972Z,1516729806.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:07.379Z,1516729807.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:50:07.380Z,1516729807.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:07.784Z,1516729807.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:50:07.785Z,1516729807.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:08.180Z,1516729808.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:50:08.181Z,1516729808.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:08.573Z,1516729808.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:50:08.574Z,1516729808.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:08.972Z,1516729808.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:50:08.973Z,1516729808.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:09.385Z,1516729809.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:09.782Z,1516729809.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:10.178Z,1516729810.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:13.273Z,1516729813.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:13.393Z,1516729813.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:13.764Z,1516729813.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:14.164Z,1516729814.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:14.565Z,1516729814.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:14.941Z,1516729814.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:15.341Z,1516729815.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:15.744Z,1516729815.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:16.149Z,1516729816.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:16.549Z,1516729816.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:16.949Z,1516729816.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:17.372Z,1516729817.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:17.742Z,1516729817.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:18.141Z,1516729818.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:18.541Z,1516729818.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:18.948Z,1516729818.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:19.349Z,1516729819.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:19.753Z,1516729819.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:20.150Z,1516729820.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:20.553Z,1516729820.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:20.942Z,1516729820.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:21.352Z,1516729821.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:21.753Z,1516729821.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:22.143Z,1516729822.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:22.553Z,1516729822.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:22.956Z,1516729822.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:23.351Z,1516729823.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:23.749Z,1516729823.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:24.160Z,1516729824.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:24.539Z,1516729824.539 [PNI_TCM](ERROR): CRC does not match. Expected:0x58141 got:0x6466 2018-01-23T17:50:24.565Z,1516729824.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:24.947Z,1516729824.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:25.345Z,1516729825.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:25.765Z,1516729825.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:26.161Z,1516729826.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:26.561Z,1516729826.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:26.946Z,1516729826.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:27.357Z,1516729827.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:27.743Z,1516729827.743 [PNI_TCM](ERROR): CRC does not match. Expected:0x54708 got:0x49815 2018-01-23T17:50:27.769Z,1516729827.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:28.153Z,1516729828.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:28.553Z,1516729828.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:28.957Z,1516729828.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:29.358Z,1516729829.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:29.746Z,1516729829.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:30.153Z,1516729830.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:30.565Z,1516729830.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:30.943Z,1516729830.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287 2018-01-23T17:50:30.961Z,1516729830.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:31.348Z,1516729831.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:31.754Z,1516729831.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:32.159Z,1516729832.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:32.556Z,1516729832.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:32.953Z,1516729832.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:33.342Z,1516729833.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x5429 got:0x14875 2018-01-23T17:50:33.361Z,1516729833.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:33.765Z,1516729833.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:34.153Z,1516729834.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:34.561Z,1516729834.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:34.956Z,1516729834.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:35.358Z,1516729835.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:35.756Z,1516729835.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:36.140Z,1516729836.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:36.552Z,1516729836.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:36.958Z,1516729836.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:37.362Z,1516729837.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:37.758Z,1516729837.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:38.167Z,1516729838.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:38.562Z,1516729838.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:38.953Z,1516729838.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:39.332Z,1516729839.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:39.759Z,1516729839.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:40.168Z,1516729840.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:40.569Z,1516729840.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:40.970Z,1516729840.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:41.357Z,1516729841.357 [PNI_TCM](ERROR): CRC does not match. Expected:0x58695 got:0x4615 2018-01-23T17:50:41.385Z,1516729841.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:41.770Z,1516729841.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:42.137Z,1516729842.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:42.545Z,1516729842.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:42.937Z,1516729842.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:43.333Z,1516729843.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:43.761Z,1516729843.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:44.160Z,1516729844.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:44.569Z,1516729844.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:44.961Z,1516729844.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:45.365Z,1516729845.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:45.756Z,1516729845.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:46.160Z,1516729846.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:46.569Z,1516729846.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:46.967Z,1516729846.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:47.368Z,1516729847.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:47.771Z,1516729847.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:48.137Z,1516729848.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:48.540Z,1516729848.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:48.940Z,1516729848.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:49.338Z,1516729849.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:49.742Z,1516729849.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:50.145Z,1516729850.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:50.574Z,1516729850.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:50.948Z,1516729850.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:51.340Z,1516729851.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:51.741Z,1516729851.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:52.138Z,1516729852.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:52.549Z,1516729852.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:52.949Z,1516729852.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:53.349Z,1516729853.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:53.739Z,1516729853.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:54.138Z,1516729854.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:54.539Z,1516729854.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:54.944Z,1516729854.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:55.342Z,1516729855.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:55.752Z,1516729855.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:56.145Z,1516729856.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:56.546Z,1516729856.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:56.938Z,1516729856.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:57.339Z,1516729857.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:57.741Z,1516729857.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:58.138Z,1516729858.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:58.553Z,1516729858.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:58.949Z,1516729858.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:59.349Z,1516729859.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:50:59.740Z,1516729859.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:00.138Z,1516729860.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:00.549Z,1516729860.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:00.943Z,1516729860.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:01.339Z,1516729861.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:01.746Z,1516729861.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:02.146Z,1516729862.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:02.549Z,1516729862.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:02.939Z,1516729862.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:03.344Z,1516729863.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:03.742Z,1516729863.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:04.141Z,1516729864.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:04.551Z,1516729864.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:04.953Z,1516729864.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:05.349Z,1516729865.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:05.743Z,1516729865.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:06.142Z,1516729866.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:06.551Z,1516729866.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:06.953Z,1516729866.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:07.342Z,1516729867.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:07.750Z,1516729867.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:08.156Z,1516729868.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:08.553Z,1516729868.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:08.941Z,1516729868.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:09.346Z,1516729869.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:09.748Z,1516729869.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:10.148Z,1516729870.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:10.560Z,1516729870.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:13.659Z,1516729873.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:13.821Z,1516729873.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:14.122Z,1516729874.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:14.523Z,1516729874.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:14.924Z,1516729874.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:15.325Z,1516729875.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:15.730Z,1516729875.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:16.127Z,1516729876.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:16.527Z,1516729876.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:16.925Z,1516729876.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:17.326Z,1516729877.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:17.725Z,1516729877.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:18.130Z,1516729878.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:18.533Z,1516729878.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:18.937Z,1516729878.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:19.333Z,1516729879.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:19.725Z,1516729879.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:20.133Z,1516729880.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:20.533Z,1516729880.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:20.937Z,1516729880.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:21.338Z,1516729881.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:21.727Z,1516729881.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:22.121Z,1516729882.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:22.534Z,1516729882.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:22.938Z,1516729882.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:23.334Z,1516729883.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:23.728Z,1516729883.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:24.139Z,1516729884.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:24.543Z,1516729884.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:24.948Z,1516729884.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:25.345Z,1516729885.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:25.736Z,1516729885.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:26.121Z,1516729886.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:26.549Z,1516729886.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:26.946Z,1516729886.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:27.354Z,1516729887.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:27.728Z,1516729887.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:28.125Z,1516729888.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:28.544Z,1516729888.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:28.946Z,1516729888.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:29.334Z,1516729889.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:29.722Z,1516729889.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:30.132Z,1516729890.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:30.533Z,1516729890.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:30.930Z,1516729890.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:31.326Z,1516729891.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:31.722Z,1516729891.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:32.129Z,1516729892.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:32.526Z,1516729892.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:32.936Z,1516729892.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:33.339Z,1516729893.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:33.777Z,1516729893.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:34.133Z,1516729894.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:34.581Z,1516729894.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:34.960Z,1516729894.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:35.345Z,1516729895.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:35.755Z,1516729895.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:36.149Z,1516729896.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:36.541Z,1516729896.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:36.952Z,1516729896.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:37.362Z,1516729897.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:37.755Z,1516729897.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:38.160Z,1516729898.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:38.584Z,1516729898.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:38.964Z,1516729898.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:39.416Z,1516729899.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:39.734Z,1516729899.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:40.168Z,1516729900.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:40.560Z,1516729900.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:40.985Z,1516729900.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:41.337Z,1516729901.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:41.738Z,1516729901.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:42.175Z,1516729902.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:42.549Z,1516729902.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:42.973Z,1516729902.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:43.373Z,1516729903.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:43.730Z,1516729903.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:44.139Z,1516729904.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:44.551Z,1516729904.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:44.954Z,1516729904.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:45.356Z,1516729905.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:45.756Z,1516729905.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:46.134Z,1516729906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:46.581Z,1516729906.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:46.961Z,1516729906.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:47.338Z,1516729907.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:47.770Z,1516729907.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:48.139Z,1516729908.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:48.545Z,1516729908.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:48.954Z,1516729908.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:49.387Z,1516729909.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:49.745Z,1516729909.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:50.133Z,1516729910.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:50.568Z,1516729910.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:50.941Z,1516729910.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:51.428Z,1516729911.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:51.759Z,1516729911.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:52.128Z,1516729912.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:52.539Z,1516729912.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:52.945Z,1516729912.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:53.336Z,1516729913.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:53.726Z,1516729913.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:54.135Z,1516729914.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:54.527Z,1516729914.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:54.943Z,1516729914.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:55.341Z,1516729915.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:55.745Z,1516729915.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:56.133Z,1516729916.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:56.535Z,1516729916.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:56.932Z,1516729916.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:57.332Z,1516729917.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:57.737Z,1516729917.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:58.137Z,1516729918.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:58.589Z,1516729918.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:58.933Z,1516729918.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:59.325Z,1516729919.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:51:59.731Z,1516729919.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:00.135Z,1516729920.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:00.533Z,1516729920.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:00.944Z,1516729920.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:01.338Z,1516729921.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:01.740Z,1516729921.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:02.129Z,1516729922.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:02.532Z,1516729922.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:02.931Z,1516729922.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:03.337Z,1516729923.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:03.741Z,1516729923.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:04.142Z,1516729924.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:04.544Z,1516729924.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:04.935Z,1516729924.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:05.325Z,1516729925.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:05.725Z,1516729925.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:06.132Z,1516729926.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:06.525Z,1516729926.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:06.934Z,1516729926.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:07.344Z,1516729927.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:07.734Z,1516729927.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:08.125Z,1516729928.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:08.534Z,1516729928.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:08.930Z,1516729928.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:09.325Z,1516729929.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:09.737Z,1516729929.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:10.138Z,1516729930.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:10.534Z,1516729930.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:10.929Z,1516729930.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:14.028Z,1516729934.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:14.170Z,1516729934.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:14.498Z,1516729934.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:14.922Z,1516729934.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:15.326Z,1516729935.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:15.697Z,1516729935.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:16.101Z,1516729936.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:16.501Z,1516729936.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:16.913Z,1516729936.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:17.306Z,1516729937.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:17.713Z,1516729937.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:18.099Z,1516729938.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:18.504Z,1516729938.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:18.903Z,1516729938.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:19.303Z,1516729939.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:19.717Z,1516729939.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:20.113Z,1516729940.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:20.505Z,1516729940.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:20.898Z,1516729940.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:21.304Z,1516729941.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:21.698Z,1516729941.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:22.110Z,1516729942.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:22.498Z,1516729942.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:22.906Z,1516729942.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:23.317Z,1516729943.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:23.713Z,1516729943.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:24.099Z,1516729944.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:24.499Z,1516729944.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:24.906Z,1516729944.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:25.297Z,1516729945.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:25.706Z,1516729945.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:26.109Z,1516729946.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:26.506Z,1516729946.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:26.900Z,1516729946.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:27.298Z,1516729947.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:27.707Z,1516729947.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:28.106Z,1516729948.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:28.500Z,1516729948.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:28.911Z,1516729948.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:29.311Z,1516729949.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:29.706Z,1516729949.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:30.097Z,1516729950.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:30.507Z,1516729950.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:30.902Z,1516729950.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:31.305Z,1516729951.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:31.712Z,1516729951.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:32.110Z,1516729952.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:32.508Z,1516729952.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:32.908Z,1516729952.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:33.297Z,1516729953.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:33.705Z,1516729953.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:34.107Z,1516729954.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:34.503Z,1516729954.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:34.906Z,1516729954.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:35.310Z,1516729955.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:35.706Z,1516729955.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:36.105Z,1516729956.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:36.107Z,1516729956.107 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:36.107Z,1516729956.107 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 291 2018-01-23T17:52:36.107Z,1516729956.107 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:52:36.119Z,1516729956.119 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:52:36.506Z,1516729956.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:36.518Z,1516729956.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:52:36.519Z,1516729956.519 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 291 2018-01-23T17:52:36.903Z,1516729956.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:36.904Z,1516729956.904 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:52:36.905Z,1516729956.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:52:36.905Z,1516729956.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:52:37.303Z,1516729957.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:37.706Z,1516729957.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:38.109Z,1516729958.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:38.506Z,1516729958.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:38.906Z,1516729958.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:39.303Z,1516729959.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:39.696Z,1516729959.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:40.107Z,1516729960.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:40.509Z,1516729960.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:40.913Z,1516729960.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:41.316Z,1516729961.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:41.706Z,1516729961.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:42.101Z,1516729962.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:42.504Z,1516729962.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:42.902Z,1516729962.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:43.301Z,1516729963.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:43.708Z,1516729963.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:44.113Z,1516729964.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:44.507Z,1516729964.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:44.906Z,1516729964.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:45.301Z,1516729965.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:45.701Z,1516729965.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:46.099Z,1516729966.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:46.509Z,1516729966.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:46.906Z,1516729966.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:47.319Z,1516729967.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:47.710Z,1516729967.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:48.101Z,1516729968.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:48.498Z,1516729968.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:48.901Z,1516729968.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:49.301Z,1516729969.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:49.709Z,1516729969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:50.110Z,1516729970.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:50.506Z,1516729970.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:50.506Z,1516729970.506 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 291 2018-01-23T17:52:50.506Z,1516729970.506 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:52:50.508Z,1516729970.508 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:50.508Z,1516729970.508 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 291 2018-01-23T17:52:50.508Z,1516729970.508 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:52:50.520Z,1516729970.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:52:50.521Z,1516729970.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:52:50.918Z,1516729970.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:52:50.918Z,1516729970.918 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 291 2018-01-23T17:52:50.918Z,1516729970.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:52:50.918Z,1516729970.918 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 291 2018-01-23T17:52:51.304Z,1516729971.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:52:51.304Z,1516729971.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:52:51.304Z,1516729971.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:52:51.305Z,1516729971.305 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:52:51.305Z,1516729971.305 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:52:51.306Z,1516729971.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:52:51.706Z,1516729971.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:52:51.707Z,1516729971.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:52.108Z,1516729972.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:52:52.109Z,1516729972.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:52.506Z,1516729972.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:52:52.508Z,1516729972.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:52.915Z,1516729972.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:52:52.916Z,1516729972.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:53.316Z,1516729973.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:52:53.317Z,1516729973.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:53.712Z,1516729973.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:52:53.713Z,1516729973.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:54.106Z,1516729974.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:52:54.108Z,1516729974.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:54.508Z,1516729974.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:52:54.509Z,1516729974.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:54.906Z,1516729974.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:52:54.907Z,1516729974.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:55.306Z,1516729975.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:52:55.307Z,1516729975.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:55.725Z,1516729975.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:52:55.726Z,1516729975.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:56.110Z,1516729976.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:52:56.111Z,1516729976.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:56.515Z,1516729976.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:52:56.516Z,1516729976.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:56.908Z,1516729976.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:52:56.909Z,1516729976.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:57.306Z,1516729977.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:52:57.307Z,1516729977.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:57.706Z,1516729977.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:52:57.708Z,1516729977.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:58.108Z,1516729978.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:52:58.109Z,1516729978.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:58.507Z,1516729978.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:52:58.508Z,1516729978.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:58.914Z,1516729978.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:52:58.915Z,1516729978.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:59.314Z,1516729979.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:52:59.315Z,1516729979.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:52:59.714Z,1516729979.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:52:59.715Z,1516729979.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:00.107Z,1516729980.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:53:00.108Z,1516729980.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:00.508Z,1516729980.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:53:00.509Z,1516729980.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:00.907Z,1516729980.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:53:00.908Z,1516729980.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:01.307Z,1516729981.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:53:01.308Z,1516729981.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:01.722Z,1516729981.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:53:01.723Z,1516729981.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:02.115Z,1516729982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:53:02.116Z,1516729982.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:02.516Z,1516729982.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:53:02.517Z,1516729982.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:02.909Z,1516729982.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:53:02.910Z,1516729982.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:03.308Z,1516729983.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:53:03.309Z,1516729983.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:03.708Z,1516729983.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:53:03.709Z,1516729983.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:04.108Z,1516729984.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:53:04.109Z,1516729984.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:04.506Z,1516729984.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:53:04.508Z,1516729984.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:04.916Z,1516729984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:53:04.917Z,1516729984.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:05.317Z,1516729985.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:53:05.318Z,1516729985.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:05.720Z,1516729985.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:53:05.721Z,1516729985.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:06.114Z,1516729986.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:53:06.115Z,1516729986.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:06.520Z,1516729986.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:53:06.520Z,1516729986.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:06.893Z,1516729986.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:53:06.894Z,1516729986.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:07.316Z,1516729987.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:53:07.317Z,1516729987.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:07.726Z,1516729987.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:53:07.727Z,1516729987.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:08.101Z,1516729988.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:53:08.102Z,1516729988.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:08.502Z,1516729988.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:53:08.503Z,1516729988.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:08.896Z,1516729988.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:53:08.897Z,1516729988.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:09.298Z,1516729989.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:53:09.303Z,1516729989.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:09.706Z,1516729989.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:53:09.707Z,1516729989.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:10.110Z,1516729990.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:53:10.111Z,1516729990.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:10.114Z,1516729990.114 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T17:53:10.114Z,1516729990.114 [Default:CheckIn:C.Wait] Stopped 2018-01-23T17:53:10.114Z,1516729990.114 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T17:53:10.114Z,1516729990.114 [Default:CheckIn:D] Running Loop=1 2018-01-23T17:53:10.509Z,1516729990.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:10.512Z,1516729990.512 [Default:CheckIn:D] Stopped 2018-01-23T17:53:10.512Z,1516729990.512 [Default:CheckIn:E] Running Loop=1 2018-01-23T17:53:10.904Z,1516729990.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:10.907Z,1516729990.907 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 875.307552 min 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn:E] Stopped 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn] Stopped 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn](INFO): Running loop #86 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn] Running Loop=86 2018-01-23T17:53:10.908Z,1516729990.908 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T17:53:10.909Z,1516729990.909 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T17:53:11.312Z,1516729991.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:14.421Z,1516729994.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:14.581Z,1516729994.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:14.919Z,1516729994.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:15.310Z,1516729995.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:15.717Z,1516729995.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:16.108Z,1516729996.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:16.509Z,1516729996.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:16.917Z,1516729996.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:17.324Z,1516729997.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:17.721Z,1516729997.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:18.109Z,1516729998.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:18.512Z,1516729998.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:18.912Z,1516729998.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:19.309Z,1516729999.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:19.718Z,1516729999.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:20.121Z,1516730000.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:20.524Z,1516730000.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:20.908Z,1516730000.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:21.309Z,1516730001.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:21.717Z,1516730001.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:22.121Z,1516730002.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:22.525Z,1516730002.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:22.912Z,1516730002.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:23.307Z,1516730003.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:23.717Z,1516730003.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:24.125Z,1516730004.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:24.518Z,1516730004.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:24.910Z,1516730004.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:25.309Z,1516730005.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:25.718Z,1516730005.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:26.117Z,1516730006.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:26.525Z,1516730006.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:26.913Z,1516730006.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:27.317Z,1516730007.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:27.721Z,1516730007.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:28.121Z,1516730008.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:28.521Z,1516730008.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:28.912Z,1516730008.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:29.312Z,1516730009.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:29.729Z,1516730009.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:30.125Z,1516730010.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:30.521Z,1516730010.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:30.908Z,1516730010.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:31.309Z,1516730011.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:31.716Z,1516730011.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:32.117Z,1516730012.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:32.525Z,1516730012.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:32.912Z,1516730012.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:33.311Z,1516730013.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:33.717Z,1516730013.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:34.124Z,1516730014.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:34.517Z,1516730014.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:34.918Z,1516730014.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:35.306Z,1516730015.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:35.717Z,1516730015.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:36.125Z,1516730016.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:36.528Z,1516730016.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:36.912Z,1516730016.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:37.313Z,1516730017.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:37.718Z,1516730017.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:38.125Z,1516730018.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:38.521Z,1516730018.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:38.919Z,1516730018.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:39.316Z,1516730019.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:39.722Z,1516730019.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:40.126Z,1516730020.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:40.528Z,1516730020.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:40.911Z,1516730020.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:41.320Z,1516730021.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:41.721Z,1516730021.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:42.126Z,1516730022.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:42.519Z,1516730022.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:42.913Z,1516730022.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:43.318Z,1516730023.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:43.726Z,1516730023.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:44.128Z,1516730024.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:44.522Z,1516730024.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:44.928Z,1516730024.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:45.344Z,1516730025.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:45.727Z,1516730025.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:46.125Z,1516730026.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:46.529Z,1516730026.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:46.920Z,1516730026.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:47.299Z,1516730027.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:47.729Z,1516730027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:48.137Z,1516730028.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:48.537Z,1516730028.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:48.900Z,1516730028.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:49.333Z,1516730029.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:49.739Z,1516730029.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:50.111Z,1516730030.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:50.511Z,1516730030.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:50.908Z,1516730030.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:51.314Z,1516730031.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:51.725Z,1516730031.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:52.122Z,1516730032.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:52.518Z,1516730032.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:52.911Z,1516730032.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:53.308Z,1516730033.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:53.709Z,1516730033.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:54.122Z,1516730034.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:54.520Z,1516730034.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:54.917Z,1516730034.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:55.309Z,1516730035.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:55.711Z,1516730035.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:56.110Z,1516730036.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:56.509Z,1516730036.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:56.918Z,1516730036.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:57.322Z,1516730037.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:57.725Z,1516730037.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:58.115Z,1516730038.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:58.511Z,1516730038.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:58.925Z,1516730038.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:59.316Z,1516730039.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:53:59.729Z,1516730039.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:00.129Z,1516730040.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:00.533Z,1516730040.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:00.908Z,1516730040.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:01.315Z,1516730041.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:01.718Z,1516730041.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:02.119Z,1516730042.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:02.526Z,1516730042.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:02.926Z,1516730042.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:03.313Z,1516730043.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:03.717Z,1516730043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:04.116Z,1516730044.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:04.549Z,1516730044.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:04.918Z,1516730044.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:05.322Z,1516730045.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:05.726Z,1516730045.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:06.117Z,1516730046.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:06.516Z,1516730046.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:06.911Z,1516730046.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:07.318Z,1516730047.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:07.720Z,1516730047.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:08.127Z,1516730048.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:08.524Z,1516730048.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:08.933Z,1516730048.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:09.321Z,1516730049.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:09.719Z,1516730049.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:10.120Z,1516730050.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:10.519Z,1516730050.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:10.930Z,1516730050.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:11.333Z,1516730051.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:14.418Z,1516730054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:14.569Z,1516730054.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:14.909Z,1516730054.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:15.299Z,1516730055.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:15.694Z,1516730055.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:16.105Z,1516730056.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:16.505Z,1516730056.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:16.904Z,1516730056.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:17.297Z,1516730057.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:17.695Z,1516730057.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:18.105Z,1516730058.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:18.492Z,1516730058.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:18.904Z,1516730058.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:19.309Z,1516730059.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:19.728Z,1516730059.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:20.091Z,1516730060.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:20.490Z,1516730060.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:20.897Z,1516730060.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:21.305Z,1516730061.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:21.696Z,1516730061.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:22.101Z,1516730062.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:22.502Z,1516730062.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:22.912Z,1516730062.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:23.297Z,1516730063.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:23.703Z,1516730063.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:24.095Z,1516730064.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:24.514Z,1516730064.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:24.906Z,1516730064.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:25.305Z,1516730065.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:25.700Z,1516730065.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:26.096Z,1516730066.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:26.492Z,1516730066.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:26.898Z,1516730066.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:27.298Z,1516730067.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:27.673Z,1516730067.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:28.101Z,1516730068.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:28.511Z,1516730068.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:28.909Z,1516730068.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:29.316Z,1516730069.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:29.715Z,1516730069.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:30.084Z,1516730070.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:30.486Z,1516730070.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:30.925Z,1516730070.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:31.319Z,1516730071.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:31.695Z,1516730071.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:32.091Z,1516730072.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:32.483Z,1516730072.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:32.891Z,1516730072.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:33.284Z,1516730073.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:33.688Z,1516730073.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:34.097Z,1516730074.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:34.500Z,1516730074.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:34.894Z,1516730074.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:34.932Z,1516730074.932 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T17:54:35.285Z,1516730075.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:35.684Z,1516730075.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:36.085Z,1516730076.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:36.486Z,1516730076.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:36.902Z,1516730076.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:37.301Z,1516730077.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:37.701Z,1516730077.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:38.087Z,1516730078.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:38.487Z,1516730078.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:38.893Z,1516730078.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:39.288Z,1516730079.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:39.691Z,1516730079.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:40.093Z,1516730080.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:40.496Z,1516730080.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:40.893Z,1516730080.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:41.293Z,1516730081.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:41.687Z,1516730081.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:42.088Z,1516730082.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:42.485Z,1516730082.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:42.894Z,1516730082.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:43.303Z,1516730083.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:43.701Z,1516730083.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:44.091Z,1516730084.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:44.485Z,1516730084.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:44.893Z,1516730084.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:45.288Z,1516730085.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:45.693Z,1516730085.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:46.098Z,1516730086.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:46.498Z,1516730086.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:46.894Z,1516730086.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:47.291Z,1516730087.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:47.686Z,1516730087.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:48.085Z,1516730088.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:48.491Z,1516730088.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:48.897Z,1516730088.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:49.298Z,1516730089.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:49.704Z,1516730089.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:50.087Z,1516730090.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:50.489Z,1516730090.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:50.891Z,1516730090.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:51.293Z,1516730091.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:51.691Z,1516730091.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:52.095Z,1516730092.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:52.502Z,1516730092.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:52.897Z,1516730092.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:53.295Z,1516730093.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:53.693Z,1516730093.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:54.092Z,1516730094.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:54.497Z,1516730094.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:54.901Z,1516730094.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:55.300Z,1516730095.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:55.709Z,1516730095.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:56.105Z,1516730096.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:56.513Z,1516730096.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:56.881Z,1516730096.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:57.285Z,1516730097.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:57.689Z,1516730097.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:58.090Z,1516730098.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:58.494Z,1516730098.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:58.887Z,1516730098.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:59.283Z,1516730099.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:54:59.687Z,1516730099.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:00.086Z,1516730100.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:00.484Z,1516730100.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:00.897Z,1516730100.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:01.293Z,1516730101.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:01.695Z,1516730101.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:02.092Z,1516730102.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:02.488Z,1516730102.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:02.890Z,1516730102.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:03.291Z,1516730103.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:03.692Z,1516730103.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:04.109Z,1516730104.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:04.504Z,1516730104.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:04.897Z,1516730104.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:05.297Z,1516730105.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:05.696Z,1516730105.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:06.089Z,1516730106.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:06.501Z,1516730106.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:06.848Z,1516730106.848 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T17:55:06.848Z,1516730106.848 [NAL9602] Data Fault, FailCount= 5 2018-01-23T17:55:06.848Z,1516730106.848 [NAL9602](ERROR): Data Fault 2018-01-23T17:55:06.881Z,1516730106.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:06.926Z,1516730106.926 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T17:55:06.931Z,1516730106.931 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T17:55:07.248Z,1516730107.248 [NAL9602](INFO): Powering down 2018-01-23T17:55:07.280Z,1516730107.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:07.312Z,1516730107.312 [CBIT](INFO): Critical error at 20180123T175506 2018-01-23T17:55:07.687Z,1516730107.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:08.076Z,1516730108.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:08.486Z,1516730108.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:08.880Z,1516730108.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:09.289Z,1516730109.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:09.689Z,1516730109.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:10.081Z,1516730110.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:10.480Z,1516730110.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:10.883Z,1516730110.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:11.281Z,1516730111.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:11.681Z,1516730111.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:14.777Z,1516730114.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:14.912Z,1516730114.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:15.246Z,1516730115.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:15.638Z,1516730115.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:16.035Z,1516730116.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:16.438Z,1516730116.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:16.839Z,1516730116.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:17.239Z,1516730117.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:17.646Z,1516730117.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:18.042Z,1516730118.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:18.442Z,1516730118.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:18.846Z,1516730118.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:19.242Z,1516730119.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:19.635Z,1516730119.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:20.046Z,1516730120.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:20.442Z,1516730120.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:20.835Z,1516730120.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:21.237Z,1516730121.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:21.640Z,1516730121.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:22.035Z,1516730122.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:22.446Z,1516730122.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:22.847Z,1516730122.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:23.242Z,1516730123.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:23.638Z,1516730123.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:24.043Z,1516730124.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:24.441Z,1516730124.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:24.840Z,1516730124.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:25.242Z,1516730125.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:25.640Z,1516730125.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:26.048Z,1516730126.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:26.441Z,1516730126.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:26.845Z,1516730126.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:27.241Z,1516730127.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:27.641Z,1516730127.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:28.042Z,1516730128.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:28.448Z,1516730128.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:28.842Z,1516730128.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:29.242Z,1516730129.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:29.653Z,1516730129.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:30.045Z,1516730130.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:30.442Z,1516730130.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:30.846Z,1516730130.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:31.253Z,1516730131.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:31.643Z,1516730131.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:32.048Z,1516730132.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:32.446Z,1516730132.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:32.843Z,1516730132.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:33.249Z,1516730133.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:33.653Z,1516730133.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:34.046Z,1516730134.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:34.452Z,1516730134.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:34.853Z,1516730134.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:35.243Z,1516730135.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:35.644Z,1516730135.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:36.043Z,1516730136.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:36.443Z,1516730136.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:36.844Z,1516730136.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:37.251Z,1516730137.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:37.253Z,1516730137.253 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:37.253Z,1516730137.253 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 292 2018-01-23T17:55:37.253Z,1516730137.253 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:55:37.274Z,1516730137.274 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:55:37.644Z,1516730137.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:37.656Z,1516730137.656 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:55:37.656Z,1516730137.656 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 292 2018-01-23T17:55:38.047Z,1516730138.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:38.049Z,1516730138.049 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:55:38.049Z,1516730138.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:55:38.049Z,1516730138.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:55:38.444Z,1516730138.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:38.845Z,1516730138.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:39.248Z,1516730139.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:39.652Z,1516730139.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:40.044Z,1516730140.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:40.449Z,1516730140.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:40.842Z,1516730140.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:41.244Z,1516730141.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:41.649Z,1516730141.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:42.041Z,1516730142.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:42.444Z,1516730142.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:42.852Z,1516730142.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:43.244Z,1516730143.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:43.652Z,1516730143.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:44.051Z,1516730144.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:44.444Z,1516730144.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:44.851Z,1516730144.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:45.251Z,1516730145.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:45.640Z,1516730145.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:46.046Z,1516730146.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:46.434Z,1516730146.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:46.831Z,1516730146.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:47.234Z,1516730147.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:47.641Z,1516730147.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:48.031Z,1516730148.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:48.434Z,1516730148.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:48.863Z,1516730148.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:49.242Z,1516730149.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:49.642Z,1516730149.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:50.042Z,1516730150.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:50.439Z,1516730150.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:50.842Z,1516730150.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:51.242Z,1516730151.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:51.634Z,1516730151.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:51.634Z,1516730151.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 292 2018-01-23T17:55:51.635Z,1516730151.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:55:51.636Z,1516730151.636 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:51.636Z,1516730151.636 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 292 2018-01-23T17:55:51.636Z,1516730151.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:55:51.687Z,1516730151.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:55:51.687Z,1516730151.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:55:52.054Z,1516730152.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:55:52.054Z,1516730152.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 292 2018-01-23T17:55:52.067Z,1516730152.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:55:52.067Z,1516730152.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 292 2018-01-23T17:55:52.443Z,1516730152.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:55:52.444Z,1516730152.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:55:52.444Z,1516730152.444 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:55:52.445Z,1516730152.445 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:55:52.445Z,1516730152.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:55:52.445Z,1516730152.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:55:52.841Z,1516730152.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:55:52.842Z,1516730152.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:53.241Z,1516730153.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:55:53.242Z,1516730153.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:53.641Z,1516730153.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:55:53.642Z,1516730153.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:54.038Z,1516730154.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:55:54.039Z,1516730154.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:54.440Z,1516730154.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:55:54.441Z,1516730154.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:54.844Z,1516730154.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:55:54.845Z,1516730154.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:55.244Z,1516730155.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:55:55.245Z,1516730155.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:55.645Z,1516730155.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:55:55.646Z,1516730155.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:56.048Z,1516730156.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:55:56.049Z,1516730156.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:56.444Z,1516730156.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:55:56.445Z,1516730156.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:56.844Z,1516730156.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:55:56.845Z,1516730156.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:57.244Z,1516730157.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:55:57.245Z,1516730157.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:57.638Z,1516730157.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:55:57.639Z,1516730157.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:58.043Z,1516730158.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:55:58.044Z,1516730158.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:58.441Z,1516730158.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:55:58.442Z,1516730158.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:58.842Z,1516730158.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:55:58.843Z,1516730158.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:59.241Z,1516730159.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:55:59.243Z,1516730159.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:55:59.649Z,1516730159.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:55:59.650Z,1516730159.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:00.040Z,1516730160.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:56:00.041Z,1516730160.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:00.450Z,1516730160.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:56:00.451Z,1516730160.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:00.858Z,1516730160.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:56:00.859Z,1516730160.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:01.247Z,1516730161.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:56:01.248Z,1516730161.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:01.647Z,1516730161.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:56:01.648Z,1516730161.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:02.051Z,1516730162.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:56:02.052Z,1516730162.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:02.443Z,1516730162.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:56:02.444Z,1516730162.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:02.843Z,1516730162.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:56:02.844Z,1516730162.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:03.250Z,1516730163.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:56:03.252Z,1516730163.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:03.645Z,1516730163.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:56:03.646Z,1516730163.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:04.034Z,1516730164.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:56:04.051Z,1516730164.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:04.434Z,1516730164.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:56:04.435Z,1516730164.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:04.831Z,1516730164.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:56:04.832Z,1516730164.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:05.234Z,1516730165.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:56:05.235Z,1516730165.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:05.646Z,1516730165.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:56:05.667Z,1516730165.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:06.034Z,1516730166.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:56:06.035Z,1516730166.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:06.442Z,1516730166.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:56:06.443Z,1516730166.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:06.840Z,1516730166.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:56:06.841Z,1516730166.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:07.240Z,1516730167.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:56:07.241Z,1516730167.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:07.641Z,1516730167.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:56:07.642Z,1516730167.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:08.042Z,1516730168.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:56:08.043Z,1516730168.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:08.448Z,1516730168.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:56:08.449Z,1516730168.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:08.838Z,1516730168.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:56:08.843Z,1516730168.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:09.247Z,1516730169.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:56:09.248Z,1516730169.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:09.642Z,1516730169.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:56:09.643Z,1516730169.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:10.048Z,1516730170.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:56:10.049Z,1516730170.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:10.448Z,1516730170.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:56:10.449Z,1516730170.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:10.848Z,1516730170.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:56:10.849Z,1516730170.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:11.246Z,1516730171.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:56:11.247Z,1516730171.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:11.644Z,1516730171.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:12.045Z,1516730172.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:15.141Z,1516730175.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:15.285Z,1516730175.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:15.634Z,1516730175.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:16.002Z,1516730176.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:16.427Z,1516730176.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:16.810Z,1516730176.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:17.201Z,1516730177.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:17.603Z,1516730177.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:18.010Z,1516730178.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:18.406Z,1516730178.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:18.807Z,1516730178.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:19.207Z,1516730179.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:19.601Z,1516730179.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:20.010Z,1516730180.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:20.403Z,1516730180.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:20.800Z,1516730180.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:21.209Z,1516730181.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:21.603Z,1516730181.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:22.002Z,1516730182.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:22.403Z,1516730182.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:22.808Z,1516730182.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:23.202Z,1516730183.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:23.610Z,1516730183.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:24.003Z,1516730184.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:24.403Z,1516730184.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:24.803Z,1516730184.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:25.208Z,1516730185.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:25.602Z,1516730185.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:26.003Z,1516730186.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:26.403Z,1516730186.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:26.801Z,1516730186.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:27.209Z,1516730187.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:27.603Z,1516730187.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:28.002Z,1516730188.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:28.409Z,1516730188.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:28.803Z,1516730188.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:29.201Z,1516730189.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:29.603Z,1516730189.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:30.008Z,1516730190.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:30.420Z,1516730190.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:30.806Z,1516730190.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:31.213Z,1516730191.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:31.606Z,1516730191.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:32.006Z,1516730192.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:32.411Z,1516730192.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:32.803Z,1516730192.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:33.206Z,1516730193.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:33.629Z,1516730193.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:34.014Z,1516730194.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:34.421Z,1516730194.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:34.857Z,1516730194.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:35.263Z,1516730195.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:35.625Z,1516730195.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:36.058Z,1516730196.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:36.416Z,1516730196.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:36.812Z,1516730196.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:37.212Z,1516730197.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:37.598Z,1516730197.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:38.042Z,1516730198.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:38.430Z,1516730198.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:38.831Z,1516730198.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:39.235Z,1516730199.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:39.642Z,1516730199.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:40.056Z,1516730200.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:40.434Z,1516730200.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:40.891Z,1516730200.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:41.285Z,1516730201.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:41.648Z,1516730201.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:42.038Z,1516730202.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:42.444Z,1516730202.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:42.837Z,1516730202.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:43.221Z,1516730203.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:43.641Z,1516730203.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:44.021Z,1516730204.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:44.421Z,1516730204.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:44.836Z,1516730204.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:45.235Z,1516730205.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:45.663Z,1516730205.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:46.059Z,1516730206.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:46.425Z,1516730206.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:46.827Z,1516730206.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:47.233Z,1516730207.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:47.638Z,1516730207.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:48.030Z,1516730208.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:48.470Z,1516730208.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:48.834Z,1516730208.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:49.237Z,1516730209.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:49.644Z,1516730209.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:50.037Z,1516730210.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:50.437Z,1516730210.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:50.812Z,1516730210.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:51.217Z,1516730211.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:51.621Z,1516730211.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:52.026Z,1516730212.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:52.408Z,1516730212.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:52.815Z,1516730212.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:53.213Z,1516730213.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:53.615Z,1516730213.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:54.015Z,1516730214.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:54.413Z,1516730214.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:54.809Z,1516730214.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:55.213Z,1516730215.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:55.619Z,1516730215.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:56.012Z,1516730216.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:56.415Z,1516730216.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:56.798Z,1516730216.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:57.199Z,1516730217.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:57.599Z,1516730217.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:58.006Z,1516730218.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:58.404Z,1516730218.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:58.809Z,1516730218.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:59.212Z,1516730219.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:56:59.602Z,1516730219.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:00.012Z,1516730220.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:00.407Z,1516730220.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:00.802Z,1516730220.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:01.205Z,1516730221.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:01.613Z,1516730221.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:02.002Z,1516730222.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:02.406Z,1516730222.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:02.813Z,1516730222.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:03.202Z,1516730223.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:03.606Z,1516730223.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:04.005Z,1516730224.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:04.405Z,1516730224.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:04.805Z,1516730224.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:05.212Z,1516730225.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:05.603Z,1516730225.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:06.005Z,1516730226.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:06.411Z,1516730226.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:06.803Z,1516730226.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:07.209Z,1516730227.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:07.232Z,1516730227.232 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T17:57:07.232Z,1516730227.232 [NAL9602] No Fault, FailCount= 5 2018-01-23T17:57:07.568Z,1516730227.568 [NAL9602](INFO): Powering up NAL9602 2018-01-23T17:57:07.621Z,1516730227.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:08.008Z,1516730228.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:08.417Z,1516730228.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:08.806Z,1516730228.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:09.207Z,1516730229.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:09.616Z,1516730229.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:10.006Z,1516730230.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:10.411Z,1516730230.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:10.807Z,1516730230.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:11.210Z,1516730231.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:11.604Z,1516730231.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:12.009Z,1516730232.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:12.407Z,1516730232.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:15.503Z,1516730235.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:15.639Z,1516730235.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:15.985Z,1516730235.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:16.377Z,1516730236.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:16.775Z,1516730236.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:17.170Z,1516730237.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:17.571Z,1516730237.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:17.963Z,1516730237.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:18.387Z,1516730238.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:18.730Z,1516730238.730 [NAL9602](INFO): NAL9602 initialized 2018-01-23T17:57:18.763Z,1516730238.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:19.183Z,1516730239.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:19.574Z,1516730239.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:19.975Z,1516730239.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:20.373Z,1516730240.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:20.784Z,1516730240.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:21.161Z,1516730241.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:21.569Z,1516730241.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:21.965Z,1516730241.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:22.404Z,1516730242.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:22.788Z,1516730242.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:23.189Z,1516730243.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:23.580Z,1516730243.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:23.992Z,1516730243.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:24.380Z,1516730244.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:24.772Z,1516730244.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:25.172Z,1516730245.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:25.609Z,1516730245.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:25.988Z,1516730245.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:26.383Z,1516730246.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:26.786Z,1516730246.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:27.181Z,1516730247.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:27.571Z,1516730247.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:27.981Z,1516730247.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:28.384Z,1516730248.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:28.798Z,1516730248.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:29.186Z,1516730249.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:29.573Z,1516730249.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:29.973Z,1516730249.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:30.376Z,1516730250.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:30.776Z,1516730250.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:31.169Z,1516730251.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:31.593Z,1516730251.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:31.996Z,1516730251.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:32.392Z,1516730252.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:32.784Z,1516730252.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:33.185Z,1516730253.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:33.576Z,1516730253.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:33.979Z,1516730253.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:34.389Z,1516730254.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:34.791Z,1516730254.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:35.205Z,1516730255.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:35.562Z,1516730255.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:35.984Z,1516730255.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:36.385Z,1516730256.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:36.763Z,1516730256.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:37.160Z,1516730257.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:37.595Z,1516730257.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:37.993Z,1516730257.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:38.397Z,1516730258.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:38.794Z,1516730258.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:39.167Z,1516730259.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:39.568Z,1516730259.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:39.967Z,1516730259.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:40.373Z,1516730260.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:40.770Z,1516730260.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:41.170Z,1516730261.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:41.568Z,1516730261.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:41.965Z,1516730261.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:42.373Z,1516730262.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:42.772Z,1516730262.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:43.165Z,1516730263.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:43.570Z,1516730263.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:43.980Z,1516730263.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:44.403Z,1516730264.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:44.773Z,1516730264.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:45.172Z,1516730265.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:45.572Z,1516730265.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:45.967Z,1516730265.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:46.376Z,1516730266.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:46.773Z,1516730266.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:47.177Z,1516730267.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:47.566Z,1516730267.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:47.965Z,1516730267.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:48.375Z,1516730268.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:48.767Z,1516730268.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:49.165Z,1516730269.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:49.577Z,1516730269.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:49.973Z,1516730269.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:50.373Z,1516730270.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:50.766Z,1516730270.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:51.166Z,1516730271.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:51.569Z,1516730271.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:51.973Z,1516730271.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:52.373Z,1516730272.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:52.774Z,1516730272.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:53.171Z,1516730273.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:53.572Z,1516730273.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:53.965Z,1516730273.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:54.375Z,1516730274.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:54.767Z,1516730274.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:55.165Z,1516730275.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:55.577Z,1516730275.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:55.972Z,1516730275.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:56.373Z,1516730276.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:56.772Z,1516730276.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:57.167Z,1516730277.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:57.570Z,1516730277.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:57.968Z,1516730277.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:58.380Z,1516730278.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:58.779Z,1516730278.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:59.174Z,1516730279.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:59.572Z,1516730279.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:57:59.973Z,1516730279.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:00.371Z,1516730280.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:00.777Z,1516730280.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:01.171Z,1516730281.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:01.589Z,1516730281.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:01.988Z,1516730281.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:02.382Z,1516730282.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:02.770Z,1516730282.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:03.172Z,1516730283.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:03.620Z,1516730283.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:03.969Z,1516730283.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:04.377Z,1516730284.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:04.778Z,1516730284.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:05.177Z,1516730285.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:05.567Z,1516730285.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:05.972Z,1516730285.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:06.366Z,1516730286.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:06.781Z,1516730286.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:07.169Z,1516730287.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:07.577Z,1516730287.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:07.980Z,1516730287.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:08.378Z,1516730288.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:08.770Z,1516730288.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:09.177Z,1516730289.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:09.569Z,1516730289.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:09.979Z,1516730289.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:10.381Z,1516730290.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:10.778Z,1516730290.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:11.177Z,1516730291.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:11.181Z,1516730291.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T17:53:10.9Z 2018-01-23T17:58:11.181Z,1516730291.181 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T17:58:11.181Z,1516730291.181 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T17:58:11.573Z,1516730291.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:12.093Z,1516730292.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:12.397Z,1516730292.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:15.482Z,1516730295.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:15.559Z,1516730295.559 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0344.lzma 2018-01-23T17:58:15.623Z,1516730295.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:15.962Z,1516730295.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:16.313Z,1516730296.313 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0344.lzma.bak 2018-01-23T17:58:16.313Z,1516730296.313 [DataOverHttps](INFO): SBD MOMSN=7756283 2018-01-23T17:58:16.366Z,1516730296.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:16.998Z,1516730296.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:17.172Z,1516730297.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:20.275Z,1516730300.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:20.405Z,1516730300.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:20.749Z,1516730300.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:21.145Z,1516730301.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:21.547Z,1516730301.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:21.941Z,1516730301.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:25.045Z,1516730305.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:25.123Z,1516730305.123 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0345.lzma 2018-01-23T17:58:25.201Z,1516730305.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:25.546Z,1516730305.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:25.898Z,1516730305.898 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0345.lzma.bak 2018-01-23T17:58:25.898Z,1516730305.898 [DataOverHttps](INFO): SBD MOMSN=7756286 2018-01-23T17:58:25.953Z,1516730305.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:26.597Z,1516730306.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:26.600Z,1516730306.600 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T17:58:26.600Z,1516730306.600 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T17:58:26.600Z,1516730306.600 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T17:58:26.757Z,1516730306.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:29.880Z,1516730309.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:30.020Z,1516730310.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:30.346Z,1516730310.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:30.750Z,1516730310.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:31.149Z,1516730311.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:31.550Z,1516730311.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:31.951Z,1516730311.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:32.354Z,1516730312.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:32.758Z,1516730312.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:33.161Z,1516730313.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:33.550Z,1516730313.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:33.957Z,1516730313.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:34.354Z,1516730314.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:34.757Z,1516730314.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:35.156Z,1516730315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:35.548Z,1516730315.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:35.947Z,1516730315.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:36.353Z,1516730316.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:36.760Z,1516730316.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:37.158Z,1516730317.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:37.557Z,1516730317.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:37.949Z,1516730317.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:38.346Z,1516730318.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:38.353Z,1516730318.353 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:38.353Z,1516730318.353 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 293 2018-01-23T17:58:38.353Z,1516730318.353 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T17:58:38.377Z,1516730318.377 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T17:58:38.746Z,1516730318.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:38.759Z,1516730318.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T17:58:38.759Z,1516730318.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 293 2018-01-23T17:58:39.154Z,1516730319.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:39.155Z,1516730319.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T17:58:39.156Z,1516730319.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:58:39.156Z,1516730319.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:58:39.561Z,1516730319.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:39.958Z,1516730319.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:40.354Z,1516730320.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:40.749Z,1516730320.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:41.149Z,1516730321.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:41.644Z,1516730321.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:41.947Z,1516730321.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:42.352Z,1516730322.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:42.756Z,1516730322.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:43.158Z,1516730323.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:43.591Z,1516730323.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:43.952Z,1516730323.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:44.350Z,1516730324.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:44.756Z,1516730324.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:45.152Z,1516730325.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:45.555Z,1516730325.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:45.961Z,1516730325.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:46.356Z,1516730326.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:46.757Z,1516730326.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:47.153Z,1516730327.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:47.545Z,1516730327.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:47.949Z,1516730327.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:48.342Z,1516730328.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:48.749Z,1516730328.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:49.154Z,1516730329.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:49.553Z,1516730329.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:49.947Z,1516730329.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:50.353Z,1516730330.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:50.744Z,1516730330.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:51.143Z,1516730331.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:51.553Z,1516730331.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:51.954Z,1516730331.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:52.349Z,1516730332.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:52.743Z,1516730332.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:52.743Z,1516730332.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 293 2018-01-23T17:58:52.743Z,1516730332.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T17:58:52.745Z,1516730332.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:52.745Z,1516730332.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 293 2018-01-23T17:58:52.745Z,1516730332.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T17:58:52.757Z,1516730332.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T17:58:52.758Z,1516730332.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T17:58:53.165Z,1516730333.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T17:58:53.165Z,1516730333.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 293 2018-01-23T17:58:53.166Z,1516730333.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T17:58:53.166Z,1516730333.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 293 2018-01-23T17:58:53.551Z,1516730333.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T17:58:53.552Z,1516730333.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:58:53.552Z,1516730333.552 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:58:53.552Z,1516730333.552 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T17:58:53.553Z,1516730333.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T17:58:53.553Z,1516730333.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T17:58:53.951Z,1516730333.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T17:58:53.952Z,1516730333.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:54.352Z,1516730334.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T17:58:54.353Z,1516730334.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:54.753Z,1516730334.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T17:58:54.754Z,1516730334.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:55.158Z,1516730335.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T17:58:55.159Z,1516730335.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:55.554Z,1516730335.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T17:58:55.555Z,1516730335.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:55.950Z,1516730335.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T17:58:55.951Z,1516730335.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:56.349Z,1516730336.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T17:58:56.350Z,1516730336.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:56.751Z,1516730336.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T17:58:56.752Z,1516730336.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:57.152Z,1516730337.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T17:58:57.153Z,1516730337.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:57.558Z,1516730337.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T17:58:57.559Z,1516730337.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:57.957Z,1516730337.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T17:58:57.958Z,1516730337.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:58.372Z,1516730338.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T17:58:58.373Z,1516730338.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:58.756Z,1516730338.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T17:58:58.757Z,1516730338.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:59.148Z,1516730339.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T17:58:59.149Z,1516730339.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:59.552Z,1516730339.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T17:58:59.553Z,1516730339.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:58:59.949Z,1516730339.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T17:58:59.950Z,1516730339.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:00.351Z,1516730340.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T17:59:00.352Z,1516730340.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:00.756Z,1516730340.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T17:59:00.757Z,1516730340.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:01.161Z,1516730341.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T17:59:01.162Z,1516730341.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:01.559Z,1516730341.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T17:59:01.560Z,1516730341.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:01.952Z,1516730341.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T17:59:01.953Z,1516730341.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:02.353Z,1516730342.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T17:59:02.354Z,1516730342.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:02.752Z,1516730342.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T17:59:02.753Z,1516730342.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:03.156Z,1516730343.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T17:59:03.157Z,1516730343.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:03.558Z,1516730343.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T17:59:03.559Z,1516730343.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:03.960Z,1516730343.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T17:59:03.961Z,1516730343.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:04.356Z,1516730344.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T17:59:04.357Z,1516730344.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:04.754Z,1516730344.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T17:59:04.755Z,1516730344.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:05.154Z,1516730345.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T17:59:05.155Z,1516730345.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:05.556Z,1516730345.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T17:59:05.557Z,1516730345.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:05.954Z,1516730345.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T17:59:05.955Z,1516730345.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:06.354Z,1516730346.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T17:59:06.355Z,1516730346.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:06.780Z,1516730346.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T17:59:06.781Z,1516730346.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:07.158Z,1516730347.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T17:59:07.159Z,1516730347.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:07.563Z,1516730347.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T17:59:07.564Z,1516730347.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:07.955Z,1516730347.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T17:59:07.956Z,1516730347.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:08.356Z,1516730348.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T17:59:08.357Z,1516730348.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:08.736Z,1516730348.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T17:59:08.737Z,1516730348.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:09.141Z,1516730349.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T17:59:09.142Z,1516730349.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:09.570Z,1516730349.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T17:59:09.572Z,1516730349.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:09.969Z,1516730349.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T17:59:09.970Z,1516730349.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:10.372Z,1516730350.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T17:59:10.373Z,1516730350.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:10.748Z,1516730350.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T17:59:10.749Z,1516730350.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:11.149Z,1516730351.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T17:59:11.150Z,1516730351.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:11.543Z,1516730351.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T17:59:11.544Z,1516730351.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:11.942Z,1516730351.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T17:59:11.944Z,1516730351.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:12.352Z,1516730352.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T17:59:12.353Z,1516730352.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:12.748Z,1516730352.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:13.148Z,1516730353.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:13.548Z,1516730353.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:13.944Z,1516730353.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:14.344Z,1516730354.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:14.744Z,1516730354.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:15.150Z,1516730355.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:15.576Z,1516730355.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:15.975Z,1516730355.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:16.349Z,1516730356.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:16.742Z,1516730356.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:17.149Z,1516730357.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:17.544Z,1516730357.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:17.945Z,1516730357.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:18.349Z,1516730358.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:18.750Z,1516730358.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:19.150Z,1516730359.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:19.553Z,1516730359.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:19.948Z,1516730359.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:20.349Z,1516730360.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:20.746Z,1516730360.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:21.144Z,1516730361.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:21.560Z,1516730361.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:21.957Z,1516730361.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:22.355Z,1516730362.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:22.746Z,1516730362.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:23.154Z,1516730363.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:23.545Z,1516730363.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:23.947Z,1516730363.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:24.354Z,1516730364.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:24.755Z,1516730364.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:25.158Z,1516730365.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:25.561Z,1516730365.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:25.946Z,1516730365.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:26.345Z,1516730366.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:26.745Z,1516730366.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:27.153Z,1516730367.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:30.250Z,1516730370.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:30.393Z,1516730370.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:30.738Z,1516730370.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:31.142Z,1516730371.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:31.535Z,1516730371.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:31.917Z,1516730371.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:32.315Z,1516730372.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:32.745Z,1516730372.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:33.143Z,1516730373.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:33.546Z,1516730373.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:33.912Z,1516730373.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:34.320Z,1516730374.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:34.716Z,1516730374.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:35.116Z,1516730375.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:35.518Z,1516730375.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:35.921Z,1516730375.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:36.318Z,1516730376.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:36.714Z,1516730376.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:37.115Z,1516730377.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:37.514Z,1516730377.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:37.916Z,1516730377.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:38.320Z,1516730378.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:38.718Z,1516730378.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:39.122Z,1516730379.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:39.548Z,1516730379.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:39.915Z,1516730379.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:40.314Z,1516730380.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:40.716Z,1516730380.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:41.114Z,1516730381.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:41.521Z,1516730381.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:41.921Z,1516730381.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:42.318Z,1516730382.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:42.716Z,1516730382.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:43.115Z,1516730383.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:43.521Z,1516730383.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:43.918Z,1516730383.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:44.317Z,1516730384.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:44.718Z,1516730384.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:45.144Z,1516730385.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:45.524Z,1516730385.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:45.925Z,1516730385.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:46.321Z,1516730386.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:46.718Z,1516730386.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:47.114Z,1516730387.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:47.530Z,1516730387.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:47.922Z,1516730387.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:48.333Z,1516730388.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:48.721Z,1516730388.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:49.119Z,1516730389.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:49.529Z,1516730389.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:49.922Z,1516730389.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:50.316Z,1516730390.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:50.725Z,1516730390.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:51.129Z,1516730391.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:51.526Z,1516730391.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:51.915Z,1516730391.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:52.325Z,1516730392.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:52.716Z,1516730392.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:53.116Z,1516730393.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:53.526Z,1516730393.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:53.932Z,1516730393.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:54.325Z,1516730394.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:54.717Z,1516730394.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:55.120Z,1516730395.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:55.529Z,1516730395.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:55.926Z,1516730395.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:56.325Z,1516730396.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:56.717Z,1516730396.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:57.125Z,1516730397.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:57.525Z,1516730397.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:57.930Z,1516730397.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:58.329Z,1516730398.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:58.718Z,1516730398.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:59.118Z,1516730399.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:59.529Z,1516730399.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T17:59:59.936Z,1516730399.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:00.333Z,1516730400.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:00.720Z,1516730400.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:01.120Z,1516730401.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:01.537Z,1516730401.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:01.933Z,1516730401.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:02.330Z,1516730402.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:02.718Z,1516730402.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:03.127Z,1516730403.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:03.526Z,1516730403.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:03.925Z,1516730403.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:04.333Z,1516730404.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:04.720Z,1516730404.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:05.115Z,1516730405.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:05.525Z,1516730405.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:05.932Z,1516730405.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:06.333Z,1516730406.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:06.718Z,1516730406.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:07.120Z,1516730407.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:07.529Z,1516730407.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:07.933Z,1516730407.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:08.326Z,1516730408.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:08.720Z,1516730408.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:09.125Z,1516730409.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:09.529Z,1516730409.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:09.933Z,1516730409.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:10.325Z,1516730410.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:10.720Z,1516730410.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:11.114Z,1516730411.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:11.531Z,1516730411.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:11.932Z,1516730411.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:12.333Z,1516730412.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:12.720Z,1516730412.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:13.117Z,1516730413.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:13.529Z,1516730413.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:13.933Z,1516730413.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:14.326Z,1516730414.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:14.720Z,1516730414.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:15.125Z,1516730415.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:15.526Z,1516730415.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:15.933Z,1516730415.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:16.333Z,1516730416.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:16.717Z,1516730416.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:17.115Z,1516730417.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:17.525Z,1516730417.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:17.932Z,1516730417.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:18.329Z,1516730418.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:18.718Z,1516730418.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:19.120Z,1516730419.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:19.537Z,1516730419.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:19.933Z,1516730419.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:20.336Z,1516730420.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:20.718Z,1516730420.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:21.121Z,1516730421.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:21.527Z,1516730421.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:21.926Z,1516730421.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:22.326Z,1516730422.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:22.725Z,1516730422.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:23.116Z,1516730423.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:23.540Z,1516730423.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:23.930Z,1516730423.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:24.329Z,1516730424.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:24.728Z,1516730424.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:25.129Z,1516730425.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:25.528Z,1516730425.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:25.931Z,1516730425.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:26.326Z,1516730426.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:26.728Z,1516730426.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:27.122Z,1516730427.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:27.520Z,1516730427.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:30.633Z,1516730430.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:30.777Z,1516730430.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:31.139Z,1516730431.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:31.545Z,1516730431.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:31.931Z,1516730431.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:32.329Z,1516730432.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:32.738Z,1516730432.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:33.143Z,1516730433.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:33.538Z,1516730433.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:33.929Z,1516730433.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:34.329Z,1516730434.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:34.739Z,1516730434.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:35.127Z,1516730435.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:35.537Z,1516730435.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:35.940Z,1516730435.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:36.342Z,1516730436.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:36.730Z,1516730436.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:37.132Z,1516730437.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:37.527Z,1516730437.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:37.942Z,1516730437.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:38.341Z,1516730438.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:38.737Z,1516730438.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:39.129Z,1516730439.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:39.532Z,1516730439.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:39.937Z,1516730439.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:40.337Z,1516730440.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:40.743Z,1516730440.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:41.142Z,1516730441.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:41.549Z,1516730441.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:41.931Z,1516730441.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:42.333Z,1516730442.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:42.733Z,1516730442.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:43.136Z,1516730443.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:43.547Z,1516730443.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:43.938Z,1516730443.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:44.342Z,1516730444.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:44.741Z,1516730444.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:45.133Z,1516730445.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:45.538Z,1516730445.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:45.930Z,1516730445.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:46.345Z,1516730446.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:46.745Z,1516730446.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:47.138Z,1516730447.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:47.542Z,1516730447.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:47.932Z,1516730447.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:48.337Z,1516730448.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:48.733Z,1516730448.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:49.141Z,1516730449.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:49.534Z,1516730449.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:49.949Z,1516730449.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:50.357Z,1516730450.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:50.749Z,1516730450.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:51.134Z,1516730451.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:51.545Z,1516730451.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:51.934Z,1516730451.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:52.333Z,1516730452.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:52.749Z,1516730452.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:53.145Z,1516730453.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:53.557Z,1516730453.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:53.939Z,1516730453.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:54.343Z,1516730454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:54.721Z,1516730454.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:55.144Z,1516730455.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:55.529Z,1516730455.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:55.951Z,1516730455.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:56.353Z,1516730456.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:56.748Z,1516730456.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:57.153Z,1516730457.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:57.534Z,1516730457.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:57.930Z,1516730457.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:58.337Z,1516730458.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:58.761Z,1516730458.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:59.141Z,1516730459.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:59.538Z,1516730459.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:00:59.933Z,1516730459.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:00.331Z,1516730460.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:00.735Z,1516730460.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:01.135Z,1516730461.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:01.540Z,1516730461.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:01.945Z,1516730461.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:02.342Z,1516730462.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:02.748Z,1516730462.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:03.136Z,1516730463.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:03.536Z,1516730463.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:03.936Z,1516730463.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:04.340Z,1516730464.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:04.741Z,1516730464.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:05.145Z,1516730465.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:05.543Z,1516730465.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:05.936Z,1516730465.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:06.330Z,1516730466.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:06.741Z,1516730466.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:07.137Z,1516730467.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:07.542Z,1516730467.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:07.949Z,1516730467.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:08.349Z,1516730468.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:08.749Z,1516730468.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:09.136Z,1516730469.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:09.531Z,1516730469.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:09.945Z,1516730469.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:10.336Z,1516730470.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:10.749Z,1516730470.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:11.153Z,1516730471.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:11.550Z,1516730471.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:11.937Z,1516730471.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:12.337Z,1516730472.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:12.737Z,1516730472.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:13.144Z,1516730473.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:13.542Z,1516730473.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:13.941Z,1516730473.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:14.344Z,1516730474.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:14.764Z,1516730474.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:15.142Z,1516730475.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:15.539Z,1516730475.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:15.946Z,1516730475.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:16.348Z,1516730476.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:16.746Z,1516730476.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:17.144Z,1516730477.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:17.545Z,1516730477.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:17.936Z,1516730477.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:18.341Z,1516730478.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:18.737Z,1516730478.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:19.139Z,1516730479.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:19.555Z,1516730479.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:19.947Z,1516730479.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:20.346Z,1516730480.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:20.745Z,1516730480.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:21.145Z,1516730481.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:21.534Z,1516730481.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:21.938Z,1516730481.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:22.333Z,1516730482.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:22.741Z,1516730482.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:23.145Z,1516730483.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:23.542Z,1516730483.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:23.934Z,1516730483.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:24.333Z,1516730484.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:24.733Z,1516730484.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:25.131Z,1516730485.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:25.536Z,1516730485.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:25.938Z,1516730485.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:26.353Z,1516730486.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:26.746Z,1516730486.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:27.136Z,1516730487.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:27.531Z,1516730487.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:30.632Z,1516730490.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:30.788Z,1516730490.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:31.110Z,1516730491.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:31.531Z,1516730491.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:31.909Z,1516730491.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:32.295Z,1516730492.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:32.704Z,1516730492.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:33.098Z,1516730493.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:33.498Z,1516730493.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:33.947Z,1516730493.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:34.315Z,1516730494.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:34.717Z,1516730494.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:35.114Z,1516730495.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:35.524Z,1516730495.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:35.938Z,1516730495.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:36.304Z,1516730496.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:36.714Z,1516730496.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:37.121Z,1516730497.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:37.511Z,1516730497.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:37.913Z,1516730497.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:38.304Z,1516730498.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:38.704Z,1516730498.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:39.088Z,1516730499.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:39.496Z,1516730499.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:39.498Z,1516730499.498 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:39.498Z,1516730499.498 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 294 2018-01-23T18:01:39.498Z,1516730499.498 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:01:39.530Z,1516730499.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:01:39.951Z,1516730499.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:39.981Z,1516730499.981 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:01:39.981Z,1516730499.981 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 294 2018-01-23T18:01:40.382Z,1516730500.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:40.392Z,1516730500.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:01:40.392Z,1516730500.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:01:40.392Z,1516730500.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:01:40.734Z,1516730500.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:41.133Z,1516730501.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:41.506Z,1516730501.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:41.913Z,1516730501.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:42.317Z,1516730502.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:42.753Z,1516730502.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:43.182Z,1516730503.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:43.517Z,1516730503.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:43.914Z,1516730503.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:44.330Z,1516730504.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:44.729Z,1516730504.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:45.105Z,1516730505.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:45.509Z,1516730505.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:45.939Z,1516730505.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:46.317Z,1516730506.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:46.721Z,1516730506.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:47.103Z,1516730507.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:47.525Z,1516730507.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:47.910Z,1516730507.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:48.336Z,1516730508.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:48.717Z,1516730508.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:49.122Z,1516730509.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:49.526Z,1516730509.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:49.914Z,1516730509.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:50.306Z,1516730510.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:50.749Z,1516730510.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:51.141Z,1516730511.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:51.541Z,1516730511.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:51.916Z,1516730511.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:52.312Z,1516730512.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:52.725Z,1516730512.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:53.113Z,1516730513.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:53.517Z,1516730513.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:53.912Z,1516730513.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:53.912Z,1516730513.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 294 2018-01-23T18:01:53.912Z,1516730513.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:01:53.914Z,1516730513.914 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:53.914Z,1516730513.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 294 2018-01-23T18:01:53.914Z,1516730513.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:01:53.961Z,1516730513.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:01:53.961Z,1516730513.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:01:54.412Z,1516730514.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:01:54.412Z,1516730514.412 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 294 2018-01-23T18:01:54.412Z,1516730514.412 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:01:54.412Z,1516730514.412 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 294 2018-01-23T18:01:54.716Z,1516730514.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:01:54.716Z,1516730514.716 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:01:54.717Z,1516730514.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:01:54.717Z,1516730514.717 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:01:54.718Z,1516730514.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:01:54.718Z,1516730514.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:01:55.106Z,1516730515.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:01:55.107Z,1516730515.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:55.510Z,1516730515.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:01:55.511Z,1516730515.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:55.889Z,1516730515.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:01:55.890Z,1516730515.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:56.288Z,1516730516.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:01:56.289Z,1516730516.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:56.701Z,1516730516.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:01:56.702Z,1516730516.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:57.102Z,1516730517.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:01:57.103Z,1516730517.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:57.512Z,1516730517.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:01:57.513Z,1516730517.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:57.905Z,1516730517.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:01:57.906Z,1516730517.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:58.300Z,1516730518.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:01:58.301Z,1516730518.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:58.702Z,1516730518.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:01:58.703Z,1516730518.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:59.101Z,1516730519.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:01:59.102Z,1516730519.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:59.524Z,1516730519.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:01:59.525Z,1516730519.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:01:59.900Z,1516730519.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:01:59.901Z,1516730519.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:00.295Z,1516730520.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:02:00.296Z,1516730520.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:00.698Z,1516730520.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:02:00.699Z,1516730520.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:01.101Z,1516730521.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:02:01.102Z,1516730521.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:01.497Z,1516730521.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:02:01.498Z,1516730521.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:01.895Z,1516730521.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:02:01.896Z,1516730521.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:02.300Z,1516730522.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:02:02.301Z,1516730522.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:02.700Z,1516730522.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:02:02.701Z,1516730522.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:03.101Z,1516730523.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:02:03.102Z,1516730523.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:03.504Z,1516730523.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:02:03.505Z,1516730523.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:03.896Z,1516730523.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:02:03.897Z,1516730523.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:04.295Z,1516730524.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:02:04.296Z,1516730524.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:04.702Z,1516730524.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:02:04.703Z,1516730524.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:05.101Z,1516730525.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:02:05.102Z,1516730525.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:05.502Z,1516730525.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:02:05.503Z,1516730525.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:05.896Z,1516730525.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:02:05.897Z,1516730525.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:06.295Z,1516730526.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:02:06.296Z,1516730526.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:06.704Z,1516730526.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:02:06.705Z,1516730526.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:07.113Z,1516730527.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:02:07.114Z,1516730527.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:07.504Z,1516730527.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:02:07.505Z,1516730527.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:07.900Z,1516730527.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:02:07.901Z,1516730527.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:08.296Z,1516730528.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:02:08.297Z,1516730528.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:08.704Z,1516730528.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:02:08.705Z,1516730528.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:09.108Z,1516730529.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:02:09.109Z,1516730529.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:09.508Z,1516730529.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:02:09.509Z,1516730529.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:09.897Z,1516730529.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:02:09.897Z,1516730529.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:10.299Z,1516730530.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:02:10.300Z,1516730530.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:10.704Z,1516730530.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:02:10.705Z,1516730530.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:11.105Z,1516730531.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:02:11.106Z,1516730531.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:11.504Z,1516730531.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:02:11.505Z,1516730531.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:11.907Z,1516730531.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:02:11.908Z,1516730531.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:12.308Z,1516730532.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:02:12.309Z,1516730532.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:12.714Z,1516730532.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:02:12.715Z,1516730532.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:13.118Z,1516730533.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:02:13.119Z,1516730533.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:13.510Z,1516730533.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:02:13.511Z,1516730533.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:13.903Z,1516730533.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:02:13.904Z,1516730533.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:14.309Z,1516730534.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:14.714Z,1516730534.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:15.116Z,1516730535.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:15.515Z,1516730535.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:15.917Z,1516730535.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:16.312Z,1516730536.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:16.708Z,1516730536.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:17.113Z,1516730537.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:17.521Z,1516730537.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:17.909Z,1516730537.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:18.288Z,1516730538.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:18.698Z,1516730538.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:19.119Z,1516730539.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:19.521Z,1516730539.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:19.897Z,1516730539.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:20.297Z,1516730540.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:20.699Z,1516730540.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:21.099Z,1516730541.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:21.499Z,1516730541.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:21.895Z,1516730541.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:22.297Z,1516730542.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:22.705Z,1516730542.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:23.113Z,1516730543.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:23.505Z,1516730543.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:23.909Z,1516730543.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:24.300Z,1516730544.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:24.707Z,1516730544.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:25.114Z,1516730545.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:25.506Z,1516730545.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:25.903Z,1516730545.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:26.303Z,1516730546.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:26.705Z,1516730546.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:27.107Z,1516730547.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:27.509Z,1516730547.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:27.918Z,1516730547.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:31.005Z,1516730551.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:31.147Z,1516730551.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:31.475Z,1516730551.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:31.902Z,1516730551.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:32.295Z,1516730552.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:32.673Z,1516730552.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:33.068Z,1516730553.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:33.477Z,1516730553.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:33.903Z,1516730553.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:34.281Z,1516730554.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:34.674Z,1516730554.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:35.072Z,1516730555.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:35.470Z,1516730555.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:35.869Z,1516730555.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:36.273Z,1516730556.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:36.682Z,1516730556.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:37.081Z,1516730557.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:37.485Z,1516730557.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:37.881Z,1516730557.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:38.274Z,1516730558.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:38.677Z,1516730558.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:39.073Z,1516730559.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:39.481Z,1516730559.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:39.885Z,1516730559.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:40.280Z,1516730560.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:40.685Z,1516730560.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:41.081Z,1516730561.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:41.475Z,1516730561.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:41.881Z,1516730561.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:42.272Z,1516730562.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:42.672Z,1516730562.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:43.085Z,1516730563.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:43.482Z,1516730563.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:43.888Z,1516730563.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:44.274Z,1516730564.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:44.677Z,1516730564.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:45.072Z,1516730565.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:45.471Z,1516730565.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:45.887Z,1516730565.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:46.285Z,1516730566.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:46.685Z,1516730566.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:47.073Z,1516730567.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:47.476Z,1516730567.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:47.881Z,1516730567.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:48.274Z,1516730568.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:48.690Z,1516730568.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:49.085Z,1516730569.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:49.485Z,1516730569.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:49.882Z,1516730569.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:50.274Z,1516730570.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:50.674Z,1516730570.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:51.081Z,1516730571.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:51.474Z,1516730571.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:51.882Z,1516730571.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:52.287Z,1516730572.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:52.686Z,1516730572.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:53.077Z,1516730573.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:53.481Z,1516730573.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:53.881Z,1516730573.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:54.275Z,1516730574.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:54.674Z,1516730574.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:55.081Z,1516730575.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:55.485Z,1516730575.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:55.883Z,1516730575.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:56.274Z,1516730576.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:56.671Z,1516730576.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:57.094Z,1516730577.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:57.474Z,1516730577.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:57.891Z,1516730577.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:58.286Z,1516730578.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:58.693Z,1516730578.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:59.077Z,1516730579.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:59.474Z,1516730579.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:02:59.877Z,1516730579.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:00.279Z,1516730580.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:00.682Z,1516730580.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:01.083Z,1516730581.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:01.486Z,1516730581.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:01.882Z,1516730581.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:02.277Z,1516730582.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:02.675Z,1516730582.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:03.080Z,1516730583.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:03.510Z,1516730583.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:03.883Z,1516730583.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:04.292Z,1516730584.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:04.683Z,1516730584.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:05.079Z,1516730585.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:05.480Z,1516730585.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:05.877Z,1516730585.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:06.276Z,1516730586.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:06.681Z,1516730586.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:07.085Z,1516730587.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:07.485Z,1516730587.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:07.883Z,1516730587.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:08.288Z,1516730588.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:08.680Z,1516730588.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:09.081Z,1516730589.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:09.477Z,1516730589.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:09.884Z,1516730589.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:10.295Z,1516730590.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:10.692Z,1516730590.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:11.079Z,1516730591.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:11.485Z,1516730591.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:11.879Z,1516730591.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:12.279Z,1516730592.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:12.684Z,1516730592.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:13.082Z,1516730593.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:13.487Z,1516730593.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:13.883Z,1516730593.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:14.279Z,1516730594.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:14.681Z,1516730594.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:15.085Z,1516730595.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:15.483Z,1516730595.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:15.889Z,1516730595.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:16.287Z,1516730596.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:16.691Z,1516730596.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:17.083Z,1516730597.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:17.484Z,1516730597.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:17.883Z,1516730597.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:18.280Z,1516730598.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:18.692Z,1516730598.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:19.084Z,1516730599.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:19.495Z,1516730599.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:19.888Z,1516730599.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:20.287Z,1516730600.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:20.685Z,1516730600.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:21.067Z,1516730601.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:21.489Z,1516730601.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:21.892Z,1516730601.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:22.294Z,1516730602.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:22.694Z,1516730602.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:23.077Z,1516730603.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:23.471Z,1516730603.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:23.872Z,1516730603.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:24.277Z,1516730604.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:24.672Z,1516730604.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:25.074Z,1516730605.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:25.502Z,1516730605.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:25.902Z,1516730605.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:26.277Z,1516730606.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:26.673Z,1516730606.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:27.073Z,1516730607.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:27.075Z,1516730607.075 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:03:27.076Z,1516730607.076 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:03:27.076Z,1516730607.076 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:03:27.076Z,1516730607.076 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:03:27.480Z,1516730607.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:27.483Z,1516730607.483 [Default:CheckIn:D] Stopped 2018-01-23T18:03:27.483Z,1516730607.483 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:03:27.890Z,1516730607.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:27.913Z,1516730607.913 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 885.590365 min 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn:E] Stopped 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn] Stopped 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn](INFO): Running loop #87 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn] Running Loop=87 2018-01-23T18:03:27.914Z,1516730607.914 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:03:27.919Z,1516730607.919 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:03:28.285Z,1516730608.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:31.373Z,1516730611.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:31.520Z,1516730611.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:31.865Z,1516730611.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:32.244Z,1516730612.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:32.639Z,1516730612.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:33.072Z,1516730613.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:33.454Z,1516730613.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:33.853Z,1516730613.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:34.249Z,1516730614.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:34.644Z,1516730614.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:35.045Z,1516730615.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:35.439Z,1516730615.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:35.849Z,1516730615.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:36.249Z,1516730616.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:36.653Z,1516730616.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:37.044Z,1516730617.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:37.449Z,1516730617.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:37.853Z,1516730617.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:38.252Z,1516730618.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:38.649Z,1516730618.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:39.046Z,1516730619.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:39.440Z,1516730619.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:39.850Z,1516730619.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:40.253Z,1516730620.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:40.649Z,1516730620.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:41.048Z,1516730621.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:41.449Z,1516730621.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:41.850Z,1516730621.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:42.250Z,1516730622.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:42.654Z,1516730622.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:43.041Z,1516730623.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:43.442Z,1516730623.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:43.855Z,1516730623.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:44.260Z,1516730624.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:44.654Z,1516730624.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:45.046Z,1516730625.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:45.443Z,1516730625.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:45.855Z,1516730625.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:46.254Z,1516730626.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:46.661Z,1516730626.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:47.046Z,1516730627.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:47.448Z,1516730627.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:47.849Z,1516730627.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:48.254Z,1516730628.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:48.657Z,1516730628.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:49.054Z,1516730629.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:49.451Z,1516730629.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:49.859Z,1516730629.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:50.265Z,1516730630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:50.660Z,1516730630.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:51.044Z,1516730631.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:51.459Z,1516730631.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:51.861Z,1516730631.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:52.263Z,1516730632.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:52.660Z,1516730632.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:53.030Z,1516730633.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:53.457Z,1516730633.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:53.867Z,1516730633.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:54.242Z,1516730634.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:54.668Z,1516730634.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:55.043Z,1516730635.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:55.436Z,1516730635.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:55.863Z,1516730635.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:56.267Z,1516730636.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:56.662Z,1516730636.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:57.044Z,1516730637.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:57.439Z,1516730637.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:57.842Z,1516730637.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:58.270Z,1516730638.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:58.648Z,1516730638.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:59.038Z,1516730639.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:59.438Z,1516730639.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:03:59.840Z,1516730639.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:00.246Z,1516730640.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:00.669Z,1516730640.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:01.048Z,1516730641.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:01.449Z,1516730641.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:01.841Z,1516730641.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:02.239Z,1516730642.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:02.638Z,1516730642.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:03.046Z,1516730643.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:03.453Z,1516730643.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:03.854Z,1516730643.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:04.243Z,1516730644.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:04.643Z,1516730644.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:05.042Z,1516730645.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:05.448Z,1516730645.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:05.845Z,1516730645.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:06.255Z,1516730646.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:06.654Z,1516730646.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:07.054Z,1516730647.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:07.446Z,1516730647.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:07.857Z,1516730647.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:08.249Z,1516730648.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:08.644Z,1516730648.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:09.050Z,1516730649.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:09.454Z,1516730649.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:09.855Z,1516730649.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:10.249Z,1516730650.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:10.641Z,1516730650.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:11.045Z,1516730651.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:11.446Z,1516730651.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:11.853Z,1516730651.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:12.264Z,1516730652.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:12.661Z,1516730652.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:13.051Z,1516730653.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:13.445Z,1516730653.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:13.852Z,1516730653.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:14.255Z,1516730654.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:14.653Z,1516730654.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:15.058Z,1516730655.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:15.457Z,1516730655.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:15.852Z,1516730655.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:16.251Z,1516730656.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:16.659Z,1516730656.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:17.033Z,1516730657.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:17.464Z,1516730657.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:17.834Z,1516730657.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x46374 got:0x51008 2018-01-23T18:04:17.860Z,1516730657.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:18.258Z,1516730658.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:18.669Z,1516730658.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:19.064Z,1516730659.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:19.463Z,1516730659.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:19.841Z,1516730659.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:20.240Z,1516730660.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:20.644Z,1516730660.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:21.062Z,1516730661.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:21.461Z,1516730661.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:21.860Z,1516730661.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:22.246Z,1516730662.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:22.649Z,1516730662.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:23.039Z,1516730663.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:23.442Z,1516730663.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:23.849Z,1516730663.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:24.237Z,1516730664.237 [PNI_TCM](ERROR): CRC does not match. Expected:0x746 got:0x16952 2018-01-23T18:04:24.274Z,1516730664.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:24.667Z,1516730664.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:25.050Z,1516730665.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:25.468Z,1516730665.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:25.836Z,1516730665.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x38707 got:0x40015 2018-01-23T18:04:25.868Z,1516730665.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:26.261Z,1516730666.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:26.640Z,1516730666.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:27.065Z,1516730667.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:27.452Z,1516730667.452 [PNI_TCM](ERROR): CRC does not match. Expected:0x15138 got:0x6210 2018-01-23T18:04:27.473Z,1516730667.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:27.872Z,1516730667.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:28.252Z,1516730668.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:28.653Z,1516730668.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:31.747Z,1516730671.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:31.877Z,1516730671.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:32.271Z,1516730672.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:32.640Z,1516730672.640 [PNI_TCM](ERROR): CRC does not match. Expected:0x29915 got:0x16948 2018-01-23T18:04:32.657Z,1516730672.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:33.047Z,1516730673.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:33.455Z,1516730673.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:33.841Z,1516730673.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:34.241Z,1516730674.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:34.641Z,1516730674.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:35.059Z,1516730675.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:35.096Z,1516730675.096 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:04:35.446Z,1516730675.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:35.847Z,1516730675.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:36.248Z,1516730676.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:36.621Z,1516730676.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:37.051Z,1516730677.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:37.455Z,1516730677.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:37.846Z,1516730677.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:38.248Z,1516730678.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:38.659Z,1516730678.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:39.046Z,1516730679.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:39.455Z,1516730679.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:39.859Z,1516730679.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:40.232Z,1516730680.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:40.629Z,1516730680.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:40.631Z,1516730680.631 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:40.631Z,1516730680.631 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 295 2018-01-23T18:04:40.631Z,1516730680.631 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:04:40.661Z,1516730680.661 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:04:41.040Z,1516730681.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:41.075Z,1516730681.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:04:41.075Z,1516730681.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 295 2018-01-23T18:04:41.434Z,1516730681.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:41.435Z,1516730681.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:04:41.436Z,1516730681.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:04:41.436Z,1516730681.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:04:41.834Z,1516730681.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:42.237Z,1516730682.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:42.631Z,1516730682.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:43.032Z,1516730683.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:43.432Z,1516730683.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:43.841Z,1516730683.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:44.246Z,1516730684.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:44.642Z,1516730684.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:45.054Z,1516730685.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:45.438Z,1516730685.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:45.841Z,1516730685.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:46.240Z,1516730686.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:46.642Z,1516730686.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:47.056Z,1516730687.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:47.452Z,1516730687.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:47.845Z,1516730687.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:48.244Z,1516730688.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:48.634Z,1516730688.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:49.042Z,1516730689.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:49.444Z,1516730689.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:49.839Z,1516730689.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:50.243Z,1516730690.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:50.658Z,1516730690.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:51.043Z,1516730691.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:51.440Z,1516730691.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:51.846Z,1516730691.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:52.240Z,1516730692.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:52.643Z,1516730692.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:53.052Z,1516730693.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:53.450Z,1516730693.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:53.856Z,1516730693.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:54.243Z,1516730694.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:54.645Z,1516730694.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:55.029Z,1516730695.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:55.029Z,1516730695.029 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 295 2018-01-23T18:04:55.029Z,1516730695.029 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:04:55.051Z,1516730695.051 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:55.051Z,1516730695.051 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 295 2018-01-23T18:04:55.051Z,1516730695.051 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:04:55.083Z,1516730695.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:04:55.084Z,1516730695.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:04:55.477Z,1516730695.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:04:55.477Z,1516730695.477 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 295 2018-01-23T18:04:55.477Z,1516730695.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:04:55.478Z,1516730695.478 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 295 2018-01-23T18:04:55.823Z,1516730695.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:04:55.824Z,1516730695.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:04:55.824Z,1516730695.824 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:04:55.824Z,1516730695.824 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:04:55.825Z,1516730695.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:04:55.825Z,1516730695.825 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:04:56.261Z,1516730696.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:04:56.262Z,1516730696.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:56.641Z,1516730696.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:04:56.642Z,1516730696.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:57.034Z,1516730697.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:04:57.035Z,1516730697.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:57.436Z,1516730697.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:04:57.437Z,1516730697.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:57.831Z,1516730697.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:04:57.832Z,1516730697.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:58.237Z,1516730698.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:04:58.238Z,1516730698.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:58.636Z,1516730698.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:04:58.637Z,1516730698.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:59.038Z,1516730699.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:04:59.039Z,1516730699.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:59.444Z,1516730699.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:04:59.445Z,1516730699.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:04:59.838Z,1516730699.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:04:59.839Z,1516730699.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:00.231Z,1516730700.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:05:00.232Z,1516730700.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:00.630Z,1516730700.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:05:00.631Z,1516730700.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:01.036Z,1516730701.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:05:01.037Z,1516730701.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:01.433Z,1516730701.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:05:01.434Z,1516730701.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:01.839Z,1516730701.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:05:01.840Z,1516730701.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:02.244Z,1516730702.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:05:02.245Z,1516730702.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:02.645Z,1516730702.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:05:02.646Z,1516730702.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:03.041Z,1516730703.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:05:03.042Z,1516730703.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:03.433Z,1516730703.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:05:03.434Z,1516730703.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:03.836Z,1516730703.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:05:03.837Z,1516730703.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:04.236Z,1516730704.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:05:04.237Z,1516730704.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:04.633Z,1516730704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:05:04.634Z,1516730704.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:05.042Z,1516730705.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:05:05.043Z,1516730705.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:05.445Z,1516730705.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:05:05.446Z,1516730705.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:05.845Z,1516730705.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:05:05.846Z,1516730705.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:06.231Z,1516730706.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:05:06.232Z,1516730706.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:06.632Z,1516730706.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:05:06.633Z,1516730706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:07.041Z,1516730707.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:05:07.042Z,1516730707.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:07.434Z,1516730707.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:05:07.435Z,1516730707.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:07.836Z,1516730707.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:05:07.837Z,1516730707.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:08.242Z,1516730708.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:05:08.243Z,1516730708.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:08.652Z,1516730708.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:05:08.653Z,1516730708.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:09.043Z,1516730709.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:05:09.044Z,1516730709.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:09.443Z,1516730709.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:05:09.444Z,1516730709.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:09.840Z,1516730709.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:05:09.841Z,1516730709.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:10.239Z,1516730710.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:05:10.240Z,1516730710.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:10.636Z,1516730710.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:05:10.637Z,1516730710.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:11.045Z,1516730711.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:05:11.046Z,1516730711.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:11.444Z,1516730711.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:05:11.445Z,1516730711.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:11.843Z,1516730711.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:05:11.844Z,1516730711.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:12.235Z,1516730712.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:05:12.236Z,1516730712.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:12.636Z,1516730712.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:05:12.637Z,1516730712.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:13.036Z,1516730713.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:05:13.037Z,1516730713.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:13.445Z,1516730713.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:05:13.446Z,1516730713.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:13.840Z,1516730713.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:05:13.841Z,1516730713.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:14.242Z,1516730714.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:05:14.243Z,1516730714.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:14.653Z,1516730714.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:05:14.654Z,1516730714.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:15.052Z,1516730715.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:15.449Z,1516730715.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:15.817Z,1516730715.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:15.855Z,1516730715.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:16.210Z,1516730716.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:16.225Z,1516730716.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:16.621Z,1516730716.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:16.652Z,1516730716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:17.028Z,1516730717.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:17.059Z,1516730717.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:17.427Z,1516730717.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:17.442Z,1516730717.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:17.819Z,1516730717.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:17.834Z,1516730717.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:18.216Z,1516730718.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:18.239Z,1516730718.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:18.617Z,1516730718.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:18.632Z,1516730718.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:19.016Z,1516730719.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:19.035Z,1516730719.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:19.413Z,1516730719.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:19.440Z,1516730719.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:19.812Z,1516730719.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:19.835Z,1516730719.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:20.227Z,1516730720.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:20.242Z,1516730720.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:20.627Z,1516730720.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:20.649Z,1516730720.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:21.026Z,1516730721.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:21.041Z,1516730721.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:21.413Z,1516730721.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:21.435Z,1516730721.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:21.812Z,1516730721.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:21.839Z,1516730721.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:22.217Z,1516730722.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:22.237Z,1516730722.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:22.612Z,1516730722.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:22.668Z,1516730722.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:23.029Z,1516730723.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:23.044Z,1516730723.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:23.431Z,1516730723.431 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:23.446Z,1516730723.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:23.827Z,1516730723.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:23.846Z,1516730723.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:24.213Z,1516730724.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:24.240Z,1516730724.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:24.608Z,1516730724.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:24.644Z,1516730724.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:25.028Z,1516730725.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:25.049Z,1516730725.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:25.432Z,1516730725.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:25.453Z,1516730725.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:25.828Z,1516730725.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:25.844Z,1516730725.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:26.227Z,1516730726.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:26.242Z,1516730726.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:26.609Z,1516730726.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:26.644Z,1516730726.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:27.028Z,1516730727.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:27.043Z,1516730727.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:27.432Z,1516730727.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:27.447Z,1516730727.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:27.826Z,1516730727.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:27.846Z,1516730727.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:28.209Z,1516730728.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:28.245Z,1516730728.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:28.613Z,1516730728.613 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:28.659Z,1516730728.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:29.034Z,1516730729.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:29.050Z,1516730729.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:32.125Z,1516730732.125 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:32.145Z,1516730732.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:32.252Z,1516730732.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:32.324Z,1516730732.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:32.588Z,1516730732.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:32.625Z,1516730732.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:32.993Z,1516730732.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:33.026Z,1516730733.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:33.397Z,1516730733.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:33.423Z,1516730733.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:33.788Z,1516730733.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:33.824Z,1516730733.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:34.199Z,1516730734.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:34.234Z,1516730734.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:34.603Z,1516730734.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:34.629Z,1516730734.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:34.999Z,1516730734.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:35.033Z,1516730735.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:35.388Z,1516730735.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:35.433Z,1516730735.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:35.792Z,1516730735.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:35.828Z,1516730735.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:36.189Z,1516730736.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:36.204Z,1516730736.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:36.588Z,1516730736.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:36.608Z,1516730736.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:36.999Z,1516730736.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:37.030Z,1516730737.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:37.411Z,1516730737.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:37.438Z,1516730737.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:37.811Z,1516730737.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:37.839Z,1516730737.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:38.194Z,1516730738.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:38.213Z,1516730738.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:38.597Z,1516730738.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:38.617Z,1516730738.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:39.007Z,1516730739.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:39.042Z,1516730739.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:39.404Z,1516730739.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:39.439Z,1516730739.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:39.811Z,1516730739.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:39.836Z,1516730739.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:40.202Z,1516730740.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:40.216Z,1516730740.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:40.596Z,1516730740.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:40.617Z,1516730740.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:41.012Z,1516730741.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:41.042Z,1516730741.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:41.407Z,1516730741.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:41.422Z,1516730741.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:41.799Z,1516730741.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:41.815Z,1516730741.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:42.194Z,1516730742.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:42.217Z,1516730742.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:42.597Z,1516730742.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:42.611Z,1516730742.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:43.002Z,1516730743.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:43.017Z,1516730743.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:43.403Z,1516730743.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:43.418Z,1516730743.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:43.803Z,1516730743.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:43.817Z,1516730743.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:44.198Z,1516730744.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:44.213Z,1516730744.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:44.597Z,1516730744.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:44.612Z,1516730744.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:45.003Z,1516730745.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:45.018Z,1516730745.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:45.403Z,1516730745.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:45.418Z,1516730745.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:45.802Z,1516730745.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:45.825Z,1516730745.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:46.198Z,1516730746.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:46.213Z,1516730746.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:46.597Z,1516730746.597 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:46.612Z,1516730746.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:47.002Z,1516730747.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:47.025Z,1516730747.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:47.407Z,1516730747.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:47.428Z,1516730747.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:47.806Z,1516730747.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:47.821Z,1516730747.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:48.197Z,1516730748.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:48.212Z,1516730748.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:48.593Z,1516730748.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:48.627Z,1516730748.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:48.992Z,1516730748.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:49.013Z,1516730749.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:49.406Z,1516730749.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:49.421Z,1516730749.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:49.807Z,1516730749.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:49.829Z,1516730749.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:50.207Z,1516730750.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:50.221Z,1516730750.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:50.592Z,1516730750.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:50.614Z,1516730750.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:51.006Z,1516730751.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:51.021Z,1516730751.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:51.403Z,1516730751.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:51.418Z,1516730751.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:51.797Z,1516730751.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:51.811Z,1516730751.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:52.202Z,1516730752.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:52.225Z,1516730752.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:52.611Z,1516730752.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:52.626Z,1516730752.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:53.007Z,1516730753.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:53.022Z,1516730753.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:53.396Z,1516730753.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:53.419Z,1516730753.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:53.792Z,1516730753.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:53.818Z,1516730753.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:54.188Z,1516730754.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:54.214Z,1516730754.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:54.589Z,1516730754.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:54.625Z,1516730754.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:54.992Z,1516730754.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:55.019Z,1516730755.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:55.407Z,1516730755.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:55.426Z,1516730755.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:55.809Z,1516730755.809 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:55.836Z,1516730755.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:56.199Z,1516730756.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:56.233Z,1516730756.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:56.588Z,1516730756.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:56.625Z,1516730756.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:56.989Z,1516730756.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:57.016Z,1516730757.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:57.389Z,1516730757.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:57.404Z,1516730757.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:57.788Z,1516730757.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:57.809Z,1516730757.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:58.207Z,1516730758.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:58.235Z,1516730758.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:58.607Z,1516730758.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:58.634Z,1516730758.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:59.011Z,1516730759.011 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:59.038Z,1516730759.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:59.401Z,1516730759.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:59.438Z,1516730759.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:05:59.795Z,1516730759.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:05:59.810Z,1516730759.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:00.200Z,1516730760.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:00.237Z,1516730760.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:00.600Z,1516730760.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:00.616Z,1516730760.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:00.996Z,1516730760.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:01.016Z,1516730761.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:01.399Z,1516730761.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:01.415Z,1516730761.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:01.804Z,1516730761.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:01.820Z,1516730761.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:02.203Z,1516730762.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:02.218Z,1516730762.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:02.598Z,1516730762.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:02.614Z,1516730762.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:02.993Z,1516730762.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:03.025Z,1516730763.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:03.396Z,1516730763.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:03.417Z,1516730763.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:03.807Z,1516730763.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:03.823Z,1516730763.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:04.206Z,1516730764.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:04.221Z,1516730764.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:04.607Z,1516730764.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:04.622Z,1516730764.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:05.009Z,1516730765.009 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:05.024Z,1516730765.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:05.398Z,1516730765.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:05.414Z,1516730765.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:05.792Z,1516730765.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:05.819Z,1516730765.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:06.192Z,1516730766.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:06.217Z,1516730766.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:06.598Z,1516730766.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:06.614Z,1516730766.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:06.992Z,1516730766.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:07.016Z,1516730767.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:07.406Z,1516730767.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:07.422Z,1516730767.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:07.811Z,1516730767.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:07.833Z,1516730767.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:08.211Z,1516730768.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:08.226Z,1516730768.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:08.592Z,1516730768.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:08.617Z,1516730768.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:08.997Z,1516730768.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:09.016Z,1516730769.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:09.403Z,1516730769.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:09.418Z,1516730769.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:09.792Z,1516730769.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:09.817Z,1516730769.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:10.206Z,1516730770.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:10.229Z,1516730770.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:10.611Z,1516730770.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:10.625Z,1516730770.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:11.007Z,1516730771.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:11.029Z,1516730771.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:11.395Z,1516730771.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:11.425Z,1516730771.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:11.801Z,1516730771.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:11.816Z,1516730771.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:12.191Z,1516730772.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:12.224Z,1516730772.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:12.598Z,1516730772.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:12.613Z,1516730772.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:12.992Z,1516730772.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:13.015Z,1516730773.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:13.406Z,1516730773.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:13.422Z,1516730773.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:13.811Z,1516730773.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:13.825Z,1516730773.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:14.207Z,1516730774.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:14.222Z,1516730774.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:14.592Z,1516730774.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:14.617Z,1516730774.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:14.998Z,1516730774.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:15.013Z,1516730775.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:15.396Z,1516730775.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:15.416Z,1516730775.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:15.792Z,1516730775.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:15.814Z,1516730775.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:16.208Z,1516730776.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:16.228Z,1516730776.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:16.610Z,1516730776.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:16.625Z,1516730776.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:17.007Z,1516730777.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:17.022Z,1516730777.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:17.398Z,1516730777.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:17.413Z,1516730777.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:17.802Z,1516730777.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:17.817Z,1516730777.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:18.192Z,1516730778.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:18.225Z,1516730778.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:18.599Z,1516730778.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:18.614Z,1516730778.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:18.999Z,1516730778.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:19.014Z,1516730779.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:19.408Z,1516730779.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:19.429Z,1516730779.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:19.811Z,1516730779.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:19.826Z,1516730779.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:20.208Z,1516730780.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:20.223Z,1516730780.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:20.592Z,1516730780.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:20.623Z,1516730780.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:21.001Z,1516730781.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:21.017Z,1516730781.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:21.389Z,1516730781.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:21.425Z,1516730781.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:21.788Z,1516730781.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:21.825Z,1516730781.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:22.223Z,1516730782.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:22.626Z,1516730782.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:23.022Z,1516730783.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:23.424Z,1516730783.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:23.821Z,1516730783.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:24.220Z,1516730784.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:24.616Z,1516730784.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:25.025Z,1516730785.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:25.426Z,1516730785.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:25.832Z,1516730785.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:26.223Z,1516730786.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:26.619Z,1516730786.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:27.023Z,1516730787.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:27.414Z,1516730787.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:27.819Z,1516730787.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:28.226Z,1516730788.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:28.637Z,1516730788.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:29.026Z,1516730789.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:29.416Z,1516730789.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:32.514Z,1516730792.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:32.641Z,1516730792.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:32.986Z,1516730792.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:33.414Z,1516730793.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:33.786Z,1516730793.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:34.193Z,1516730794.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:34.597Z,1516730794.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:34.993Z,1516730794.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:35.401Z,1516730795.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:35.815Z,1516730795.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:36.211Z,1516730796.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:36.608Z,1516730796.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:36.994Z,1516730796.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:37.385Z,1516730797.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:37.797Z,1516730797.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:38.198Z,1516730798.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:38.650Z,1516730798.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:39.010Z,1516730799.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:39.392Z,1516730799.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:39.797Z,1516730799.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:40.206Z,1516730800.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:40.617Z,1516730800.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:41.017Z,1516730801.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:41.425Z,1516730801.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:41.833Z,1516730801.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:42.208Z,1516730802.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:42.610Z,1516730802.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:43.009Z,1516730803.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:43.408Z,1516730803.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:43.822Z,1516730803.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:44.217Z,1516730804.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:44.610Z,1516730804.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:45.022Z,1516730805.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:45.397Z,1516730805.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:45.793Z,1516730805.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:46.190Z,1516730806.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:46.628Z,1516730806.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:46.992Z,1516730806.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:47.434Z,1516730807.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:47.838Z,1516730807.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:48.205Z,1516730808.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:48.608Z,1516730808.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:49.008Z,1516730809.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:49.408Z,1516730809.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:49.808Z,1516730809.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:50.219Z,1516730810.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:50.609Z,1516730810.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:51.012Z,1516730811.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:51.417Z,1516730811.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:51.817Z,1516730811.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:52.186Z,1516730812.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:52.585Z,1516730812.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:52.993Z,1516730812.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:53.432Z,1516730813.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:53.798Z,1516730813.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:54.240Z,1516730814.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:54.588Z,1516730814.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:55.000Z,1516730815.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:55.383Z,1516730815.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:55.791Z,1516730815.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:56.231Z,1516730816.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:56.605Z,1516730816.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:57.001Z,1516730817.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:57.393Z,1516730817.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:57.788Z,1516730817.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:58.188Z,1516730818.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:58.594Z,1516730818.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:58.988Z,1516730818.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:59.394Z,1516730819.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:06:59.780Z,1516730819.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:06:59.795Z,1516730819.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:00.172Z,1516730820.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:00.194Z,1516730820.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:00.558Z,1516730820.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:00.593Z,1516730820.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:00.961Z,1516730820.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:00.994Z,1516730820.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:01.362Z,1516730821.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:01.393Z,1516730821.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:01.761Z,1516730821.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:01.792Z,1516730821.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:02.166Z,1516730822.166 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:02.201Z,1516730822.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:02.579Z,1516730822.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:02.606Z,1516730822.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:02.975Z,1516730822.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:03.002Z,1516730823.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:03.361Z,1516730823.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:03.380Z,1516730823.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:03.762Z,1516730823.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:03.782Z,1516730823.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:04.165Z,1516730824.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:04.181Z,1516730824.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:04.565Z,1516730824.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:04.580Z,1516730824.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:04.965Z,1516730824.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:04.980Z,1516730824.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:05.367Z,1516730825.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:05.382Z,1516730825.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:05.771Z,1516730825.771 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:05.786Z,1516730825.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:06.167Z,1516730826.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:06.182Z,1516730826.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:06.565Z,1516730826.565 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:06.580Z,1516730826.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:06.966Z,1516730826.966 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:06.980Z,1516730826.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:07.361Z,1516730827.361 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:07.384Z,1516730827.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:07.765Z,1516730827.765 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:07.780Z,1516730827.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:08.171Z,1516730828.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:08.186Z,1516730828.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:08.571Z,1516730828.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:08.586Z,1516730828.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:08.968Z,1516730828.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:08.996Z,1516730828.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:09.363Z,1516730829.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:09.401Z,1516730829.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:09.770Z,1516730829.770 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:09.785Z,1516730829.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:10.175Z,1516730830.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:10.190Z,1516730830.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:10.575Z,1516730830.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:10.590Z,1516730830.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:10.975Z,1516730830.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:10.990Z,1516730830.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:11.365Z,1516730831.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:11.384Z,1516730831.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:11.767Z,1516730831.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:11.781Z,1516730831.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:12.180Z,1516730832.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:12.195Z,1516730832.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:12.575Z,1516730832.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:12.590Z,1516730832.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:12.975Z,1516730832.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:12.997Z,1516730832.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:13.372Z,1516730833.372 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:13.387Z,1516730833.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:13.761Z,1516730833.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:13.789Z,1516730833.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:14.180Z,1516730834.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:14.195Z,1516730834.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:14.578Z,1516730834.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:14.593Z,1516730834.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:14.974Z,1516730834.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:14.990Z,1516730834.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:15.367Z,1516730835.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:15.382Z,1516730835.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:15.761Z,1516730835.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:15.784Z,1516730835.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:16.175Z,1516730836.175 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:16.191Z,1516730836.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:16.580Z,1516730836.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:16.596Z,1516730836.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:16.974Z,1516730836.974 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:16.998Z,1516730836.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:17.371Z,1516730837.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:17.386Z,1516730837.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:17.757Z,1516730837.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:17.794Z,1516730837.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:18.172Z,1516730838.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:18.199Z,1516730838.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:18.580Z,1516730838.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:18.595Z,1516730838.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:18.977Z,1516730838.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:18.993Z,1516730838.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:19.359Z,1516730839.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:19.390Z,1516730839.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:19.761Z,1516730839.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:07:19.797Z,1516730839.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:20.144Z,1516730840.144 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T18:07:20.144Z,1516730840.144 [NAL9602] Data Fault, FailCount= 1 2018-01-23T18:07:20.144Z,1516730840.144 [NAL9602](ERROR): Data Fault 2018-01-23T18:07:20.177Z,1516730840.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:20.232Z,1516730840.232 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T18:07:20.548Z,1516730840.548 [NAL9602](INFO): Powering down 2018-01-23T18:07:20.609Z,1516730840.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:20.981Z,1516730840.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:21.389Z,1516730841.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:21.414Z,1516730841.414 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T18:07:21.414Z,1516730841.414 [NAL9602] No Fault, FailCount= 1 2018-01-23T18:07:21.780Z,1516730841.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:22.180Z,1516730842.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:22.586Z,1516730842.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:22.977Z,1516730842.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:23.382Z,1516730843.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:23.779Z,1516730843.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:24.180Z,1516730844.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:24.589Z,1516730844.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:24.988Z,1516730844.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:25.380Z,1516730845.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:25.785Z,1516730845.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:26.184Z,1516730846.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:26.581Z,1516730846.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:26.991Z,1516730846.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:27.381Z,1516730847.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:27.781Z,1516730847.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:28.182Z,1516730848.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:28.585Z,1516730848.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:28.985Z,1516730848.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:29.391Z,1516730849.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:29.792Z,1516730849.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:32.893Z,1516730852.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:33.033Z,1516730853.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:33.359Z,1516730853.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:33.762Z,1516730853.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:34.159Z,1516730854.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:34.569Z,1516730854.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:34.957Z,1516730854.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:35.360Z,1516730855.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:35.765Z,1516730855.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:36.157Z,1516730856.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:36.568Z,1516730856.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:36.962Z,1516730856.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:37.356Z,1516730857.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:37.762Z,1516730857.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:38.161Z,1516730858.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:38.559Z,1516730858.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:38.964Z,1516730858.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:39.360Z,1516730859.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:39.759Z,1516730859.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:40.164Z,1516730860.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:40.560Z,1516730860.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:40.960Z,1516730860.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:41.369Z,1516730861.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:41.761Z,1516730861.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:41.763Z,1516730861.763 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:41.763Z,1516730861.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 296 2018-01-23T18:07:41.763Z,1516730861.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:07:41.815Z,1516730861.815 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:07:42.160Z,1516730862.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:42.172Z,1516730862.172 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:07:42.172Z,1516730862.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 296 2018-01-23T18:07:42.565Z,1516730862.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:42.566Z,1516730862.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:07:42.566Z,1516730862.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:07:42.567Z,1516730862.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:07:42.963Z,1516730862.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:43.361Z,1516730863.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:43.772Z,1516730863.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:44.167Z,1516730864.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:44.567Z,1516730864.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:45.046Z,1516730865.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:45.367Z,1516730865.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:45.768Z,1516730865.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:46.167Z,1516730866.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:46.569Z,1516730866.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:46.963Z,1516730866.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:47.367Z,1516730867.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:47.773Z,1516730867.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:48.171Z,1516730868.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:48.565Z,1516730868.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:48.977Z,1516730868.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:49.361Z,1516730869.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x40908 got:0x49815 2018-01-23T18:07:49.381Z,1516730869.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:49.777Z,1516730869.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:50.168Z,1516730870.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:50.569Z,1516730870.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:50.928Z,1516730870.928 [NAL9602](INFO): Powering up NAL9602 2018-01-23T18:07:50.978Z,1516730870.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:51.364Z,1516730871.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:51.774Z,1516730871.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:52.189Z,1516730872.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:52.566Z,1516730872.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:52.966Z,1516730872.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:53.364Z,1516730873.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:53.781Z,1516730873.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:54.160Z,1516730874.160 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T18:07:54.184Z,1516730874.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:54.569Z,1516730874.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:54.969Z,1516730874.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:55.373Z,1516730875.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:55.775Z,1516730875.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:56.168Z,1516730876.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:56.168Z,1516730876.168 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 296 2018-01-23T18:07:56.168Z,1516730876.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:07:56.172Z,1516730876.172 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:56.172Z,1516730876.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 296 2018-01-23T18:07:56.172Z,1516730876.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:07:56.197Z,1516730876.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:07:56.197Z,1516730876.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:07:56.589Z,1516730876.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:07:56.589Z,1516730876.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 296 2018-01-23T18:07:56.590Z,1516730876.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:07:56.590Z,1516730876.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 296 2018-01-23T18:07:56.981Z,1516730876.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:07:56.981Z,1516730876.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:07:56.981Z,1516730876.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:07:56.982Z,1516730876.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:07:56.982Z,1516730876.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:07:56.983Z,1516730876.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:07:57.376Z,1516730877.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:07:57.377Z,1516730877.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:57.755Z,1516730877.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:07:57.756Z,1516730877.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:58.156Z,1516730878.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:07:58.156Z,1516730878.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:58.592Z,1516730878.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:07:58.593Z,1516730878.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:58.990Z,1516730878.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:07:58.992Z,1516730878.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:59.363Z,1516730879.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:07:59.364Z,1516730879.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:07:59.761Z,1516730879.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:07:59.762Z,1516730879.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:00.189Z,1516730880.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:08:00.190Z,1516730880.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:00.558Z,1516730880.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:08:00.560Z,1516730880.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:00.962Z,1516730880.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:08:00.963Z,1516730880.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:01.360Z,1516730881.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:08:01.361Z,1516730881.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:01.792Z,1516730881.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:08:01.793Z,1516730881.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:02.124Z,1516730882.124 [NAL9602](INFO): NAL9602 initialized 2018-01-23T18:08:02.167Z,1516730882.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:08:02.168Z,1516730882.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:02.563Z,1516730882.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:08:02.564Z,1516730882.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:02.965Z,1516730882.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:08:02.966Z,1516730882.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:03.396Z,1516730883.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:08:03.397Z,1516730883.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:03.771Z,1516730883.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:08:03.772Z,1516730883.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:04.162Z,1516730884.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:08:04.163Z,1516730884.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:04.562Z,1516730884.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:08:04.563Z,1516730884.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:04.988Z,1516730884.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:08:04.989Z,1516730884.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:05.362Z,1516730885.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:08:05.364Z,1516730885.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:05.768Z,1516730885.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:08:05.769Z,1516730885.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:06.172Z,1516730886.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:08:06.173Z,1516730886.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:06.594Z,1516730886.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:08:06.595Z,1516730886.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:06.966Z,1516730886.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:08:06.968Z,1516730886.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:07.394Z,1516730887.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:08:07.395Z,1516730887.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:07.784Z,1516730887.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:08:07.785Z,1516730887.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:08.189Z,1516730888.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:08:08.190Z,1516730888.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:08.560Z,1516730888.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:08:08.561Z,1516730888.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:08.969Z,1516730888.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:08:08.969Z,1516730888.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:09.369Z,1516730889.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:08:09.370Z,1516730889.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:09.789Z,1516730889.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:08:09.790Z,1516730889.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:10.160Z,1516730890.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:08:10.161Z,1516730890.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:10.569Z,1516730890.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:08:10.570Z,1516730890.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:10.968Z,1516730890.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:08:10.969Z,1516730890.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:11.363Z,1516730891.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:08:11.364Z,1516730891.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:11.769Z,1516730891.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:08:11.770Z,1516730891.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:12.180Z,1516730892.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:08:12.181Z,1516730892.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:12.572Z,1516730892.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:08:12.573Z,1516730892.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:12.972Z,1516730892.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:08:12.973Z,1516730892.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:13.360Z,1516730893.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:08:13.361Z,1516730893.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:13.761Z,1516730893.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:08:13.762Z,1516730893.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:14.166Z,1516730894.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:08:14.168Z,1516730894.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:14.568Z,1516730894.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:08:14.569Z,1516730894.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:14.969Z,1516730894.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:08:14.970Z,1516730894.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:15.377Z,1516730895.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:08:15.378Z,1516730895.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:15.773Z,1516730895.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:08:15.774Z,1516730895.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:16.161Z,1516730896.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:08:16.162Z,1516730896.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:16.571Z,1516730896.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:16.961Z,1516730896.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:17.364Z,1516730897.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:17.770Z,1516730897.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:18.180Z,1516730898.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:18.575Z,1516730898.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:18.973Z,1516730898.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:19.363Z,1516730899.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:19.762Z,1516730899.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:20.168Z,1516730900.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:20.564Z,1516730900.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:20.970Z,1516730900.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:21.374Z,1516730901.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:21.777Z,1516730901.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:22.160Z,1516730902.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:22.569Z,1516730902.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:22.972Z,1516730902.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:23.373Z,1516730903.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:23.780Z,1516730903.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:24.175Z,1516730904.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:24.572Z,1516730904.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:24.962Z,1516730904.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:25.381Z,1516730905.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:25.752Z,1516730905.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:26.153Z,1516730906.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:26.556Z,1516730906.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:26.990Z,1516730906.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:27.393Z,1516730907.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:27.793Z,1516730907.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:28.154Z,1516730908.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:28.157Z,1516730908.157 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:03:27.9Z 2018-01-23T18:08:28.157Z,1516730908.157 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:08:28.158Z,1516730908.158 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:08:28.561Z,1516730908.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:29.096Z,1516730909.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:29.389Z,1516730909.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:32.474Z,1516730912.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:32.551Z,1516730912.551 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0348.lzma 2018-01-23T18:08:32.640Z,1516730912.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:32.992Z,1516730912.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:33.322Z,1516730913.322 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0348.lzma.bak 2018-01-23T18:08:33.322Z,1516730913.322 [DataOverHttps](INFO): SBD MOMSN=7756400 2018-01-23T18:08:33.389Z,1516730913.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:34.013Z,1516730914.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:34.190Z,1516730914.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:37.426Z,1516730917.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:37.556Z,1516730917.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:37.941Z,1516730917.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:38.320Z,1516730918.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:38.716Z,1516730918.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:39.117Z,1516730919.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:42.209Z,1516730922.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:42.323Z,1516730922.323 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0349.lzma 2018-01-23T18:08:42.393Z,1516730922.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:42.701Z,1516730922.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:43.041Z,1516730923.041 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0349.lzma.bak 2018-01-23T18:08:43.042Z,1516730923.042 [DataOverHttps](INFO): SBD MOMSN=7756402 2018-01-23T18:08:43.114Z,1516730923.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:43.723Z,1516730923.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:43.726Z,1516730923.726 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T18:08:43.726Z,1516730923.726 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T18:08:43.726Z,1516730923.726 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T18:08:43.877Z,1516730923.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:46.970Z,1516730926.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:47.112Z,1516730927.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:47.463Z,1516730927.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:47.865Z,1516730927.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:48.264Z,1516730928.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:48.663Z,1516730928.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:49.037Z,1516730929.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:49.436Z,1516730929.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:49.865Z,1516730929.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:50.262Z,1516730930.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:50.668Z,1516730930.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:51.037Z,1516730931.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:51.448Z,1516730931.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:51.845Z,1516730931.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:52.240Z,1516730932.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:52.638Z,1516730932.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:53.063Z,1516730933.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:53.446Z,1516730933.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:53.841Z,1516730933.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:54.269Z,1516730934.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:54.666Z,1516730934.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:55.036Z,1516730935.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:55.439Z,1516730935.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:55.845Z,1516730935.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:56.269Z,1516730936.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:56.644Z,1516730936.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:57.038Z,1516730937.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:57.439Z,1516730937.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:57.834Z,1516730937.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:58.244Z,1516730938.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:58.644Z,1516730938.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:59.048Z,1516730939.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:59.473Z,1516730939.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:08:59.845Z,1516730939.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:00.248Z,1516730940.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:00.639Z,1516730940.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:01.036Z,1516730941.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:01.436Z,1516730941.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:01.854Z,1516730941.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:02.252Z,1516730942.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:02.672Z,1516730942.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:03.049Z,1516730943.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:03.436Z,1516730943.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:03.846Z,1516730943.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:04.240Z,1516730944.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:04.643Z,1516730944.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:05.058Z,1516730945.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:05.452Z,1516730945.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:05.846Z,1516730945.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:06.237Z,1516730946.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:06.637Z,1516730946.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:07.043Z,1516730947.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:07.445Z,1516730947.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:07.845Z,1516730947.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:08.249Z,1516730948.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:08.679Z,1516730948.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:09.045Z,1516730949.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:09.445Z,1516730949.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:09.838Z,1516730949.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:10.245Z,1516730950.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:10.639Z,1516730950.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:11.047Z,1516730951.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:11.453Z,1516730951.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:11.858Z,1516730951.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:12.241Z,1516730952.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:12.649Z,1516730952.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:13.050Z,1516730953.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:13.440Z,1516730953.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:13.848Z,1516730953.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:14.251Z,1516730954.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:14.649Z,1516730954.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:15.044Z,1516730955.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:15.441Z,1516730955.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:15.842Z,1516730955.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:16.244Z,1516730956.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:16.647Z,1516730956.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:17.049Z,1516730957.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:17.449Z,1516730957.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:17.855Z,1516730957.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:18.244Z,1516730958.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:18.645Z,1516730958.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:19.050Z,1516730959.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:19.437Z,1516730959.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:19.849Z,1516730959.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:20.252Z,1516730960.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:20.646Z,1516730960.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:21.047Z,1516730961.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:21.450Z,1516730961.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:21.838Z,1516730961.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:22.245Z,1516730962.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:22.651Z,1516730962.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:23.045Z,1516730963.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:23.453Z,1516730963.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:23.842Z,1516730963.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:24.229Z,1516730964.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:24.629Z,1516730964.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:25.029Z,1516730965.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:25.437Z,1516730965.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:25.842Z,1516730965.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:26.253Z,1516730966.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:26.642Z,1516730966.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:27.066Z,1516730967.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:27.452Z,1516730967.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:27.850Z,1516730967.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:28.238Z,1516730968.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:28.652Z,1516730968.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:29.056Z,1516730969.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:29.460Z,1516730969.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:29.853Z,1516730969.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:30.225Z,1516730970.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:30.633Z,1516730970.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:31.035Z,1516730971.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:31.426Z,1516730971.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:31.861Z,1516730971.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:32.266Z,1516730972.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:32.658Z,1516730972.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:33.061Z,1516730973.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:33.436Z,1516730973.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:33.835Z,1516730973.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:34.235Z,1516730974.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:34.636Z,1516730974.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:35.046Z,1516730975.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:35.442Z,1516730975.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:35.850Z,1516730975.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:36.232Z,1516730976.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:36.634Z,1516730976.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:37.036Z,1516730977.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:37.435Z,1516730977.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:37.845Z,1516730977.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:38.245Z,1516730978.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:38.645Z,1516730978.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:39.035Z,1516730979.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:39.435Z,1516730979.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:39.843Z,1516730979.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:40.237Z,1516730980.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:40.635Z,1516730980.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:41.045Z,1516730981.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:41.446Z,1516730981.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:41.848Z,1516730981.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:42.233Z,1516730982.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:42.643Z,1516730982.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:43.036Z,1516730983.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:43.435Z,1516730983.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:43.845Z,1516730983.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:44.241Z,1516730984.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:47.343Z,1516730987.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:47.481Z,1516730987.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:47.833Z,1516730987.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:48.244Z,1516730988.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:48.635Z,1516730988.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:49.042Z,1516730989.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:49.445Z,1516730989.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:49.842Z,1516730989.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:50.233Z,1516730990.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:50.636Z,1516730990.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:51.045Z,1516730991.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:51.434Z,1516730991.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:51.843Z,1516730991.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:52.245Z,1516730992.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:52.649Z,1516730992.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:53.046Z,1516730993.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:53.436Z,1516730993.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:53.834Z,1516730993.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:54.233Z,1516730994.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:54.633Z,1516730994.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:55.042Z,1516730995.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:55.452Z,1516730995.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:55.846Z,1516730995.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:56.233Z,1516730996.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:56.640Z,1516730996.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:57.041Z,1516730997.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:57.433Z,1516730997.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:57.844Z,1516730997.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:58.245Z,1516730998.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:58.641Z,1516730998.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:59.034Z,1516730999.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:59.434Z,1516730999.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:09:59.840Z,1516730999.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:00.235Z,1516731000.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:00.637Z,1516731000.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:01.053Z,1516731001.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:01.449Z,1516731001.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:01.845Z,1516731001.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:02.240Z,1516731002.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:02.636Z,1516731002.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:03.040Z,1516731003.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:03.440Z,1516731003.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:03.844Z,1516731003.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:04.244Z,1516731004.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:04.642Z,1516731004.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:05.044Z,1516731005.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:05.436Z,1516731005.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:05.843Z,1516731005.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:06.247Z,1516731006.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:06.648Z,1516731006.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:07.040Z,1516731007.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:07.442Z,1516731007.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:07.843Z,1516731007.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:08.251Z,1516731008.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:08.643Z,1516731008.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:09.034Z,1516731009.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:09.441Z,1516731009.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:09.851Z,1516731009.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:10.244Z,1516731010.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:10.642Z,1516731010.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:11.044Z,1516731011.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:11.437Z,1516731011.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:11.843Z,1516731011.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:12.246Z,1516731012.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:12.652Z,1516731012.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:13.037Z,1516731013.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:13.443Z,1516731013.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:13.846Z,1516731013.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:14.249Z,1516731014.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:14.656Z,1516731014.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:15.039Z,1516731015.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:15.439Z,1516731015.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:15.853Z,1516731015.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:16.243Z,1516731016.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:16.652Z,1516731016.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:17.013Z,1516731017.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:17.042Z,1516731017.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:17.412Z,1516731017.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:17.438Z,1516731017.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:17.827Z,1516731017.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:17.842Z,1516731017.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:18.252Z,1516731018.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:18.642Z,1516731018.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:19.040Z,1516731019.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:19.435Z,1516731019.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:19.842Z,1516731019.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:20.246Z,1516731020.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:20.648Z,1516731020.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:21.036Z,1516731021.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:21.449Z,1516731021.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:21.856Z,1516731021.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:22.250Z,1516731022.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:22.653Z,1516731022.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:23.028Z,1516731023.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:23.433Z,1516731023.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:23.838Z,1516731023.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:24.241Z,1516731024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:24.634Z,1516731024.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:25.030Z,1516731025.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:25.431Z,1516731025.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:25.834Z,1516731025.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:26.238Z,1516731026.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:26.646Z,1516731026.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:27.041Z,1516731027.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:27.433Z,1516731027.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:27.834Z,1516731027.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:28.234Z,1516731028.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:28.634Z,1516731028.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:29.040Z,1516731029.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:29.436Z,1516731029.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:29.845Z,1516731029.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:30.242Z,1516731030.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:30.642Z,1516731030.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:31.034Z,1516731031.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:31.433Z,1516731031.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:31.841Z,1516731031.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:32.241Z,1516731032.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:32.648Z,1516731032.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:33.035Z,1516731033.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:33.433Z,1516731033.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:33.843Z,1516731033.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:34.246Z,1516731034.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:34.642Z,1516731034.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:35.036Z,1516731035.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:35.469Z,1516731035.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:35.845Z,1516731035.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:36.232Z,1516731036.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:36.246Z,1516731036.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:36.629Z,1516731036.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:36.649Z,1516731036.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:37.026Z,1516731037.026 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:37.041Z,1516731037.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:37.407Z,1516731037.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:37.443Z,1516731037.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:37.829Z,1516731037.829 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:37.844Z,1516731037.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:38.234Z,1516731038.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:38.249Z,1516731038.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:38.625Z,1516731038.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:38.652Z,1516731038.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:39.007Z,1516731039.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:39.034Z,1516731039.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:39.410Z,1516731039.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:39.437Z,1516731039.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:39.808Z,1516731039.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:39.843Z,1516731039.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:40.224Z,1516731040.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:40.255Z,1516731040.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:40.637Z,1516731040.637 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:40.657Z,1516731040.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:41.020Z,1516731041.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:41.053Z,1516731041.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:41.408Z,1516731041.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:41.447Z,1516731041.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:41.808Z,1516731041.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:41.846Z,1516731041.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:42.209Z,1516731042.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:42.247Z,1516731042.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:42.606Z,1516731042.606 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:42.621Z,1516731042.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:42.632Z,1516731042.632 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:42.632Z,1516731042.632 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 297 2018-01-23T18:10:42.632Z,1516731042.632 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:10:42.662Z,1516731042.662 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:10:43.019Z,1516731043.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:43.055Z,1516731043.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:43.068Z,1516731043.068 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:10:43.068Z,1516731043.068 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 297 2018-01-23T18:10:43.423Z,1516731043.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:43.453Z,1516731043.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:43.454Z,1516731043.454 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:10:43.455Z,1516731043.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:10:43.455Z,1516731043.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:10:43.819Z,1516731043.819 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:43.846Z,1516731043.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:44.209Z,1516731044.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:44.245Z,1516731044.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:44.610Z,1516731044.610 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:44.624Z,1516731044.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:47.712Z,1516731047.712 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:47.727Z,1516731047.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:47.821Z,1516731047.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:47.860Z,1516731047.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:48.211Z,1516731048.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:48.227Z,1516731048.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:48.611Z,1516731048.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:48.626Z,1516731048.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:49.010Z,1516731049.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:49.026Z,1516731049.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:49.396Z,1516731049.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:49.418Z,1516731049.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:49.802Z,1516731049.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:49.817Z,1516731049.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:50.197Z,1516731050.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:50.220Z,1516731050.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:50.596Z,1516731050.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:50.618Z,1516731050.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:51.012Z,1516731051.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:51.027Z,1516731051.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:51.414Z,1516731051.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:51.429Z,1516731051.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:51.810Z,1516731051.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:51.825Z,1516731051.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:52.202Z,1516731052.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:52.217Z,1516731052.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:52.600Z,1516731052.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:52.619Z,1516731052.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:52.995Z,1516731052.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:53.028Z,1516731053.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:53.402Z,1516731053.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:53.417Z,1516731053.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:53.796Z,1516731053.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:53.821Z,1516731053.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:54.210Z,1516731054.210 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:54.226Z,1516731054.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:54.615Z,1516731054.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:54.630Z,1516731054.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:55.010Z,1516731055.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:55.025Z,1516731055.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:55.396Z,1516731055.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:55.421Z,1516731055.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:55.802Z,1516731055.802 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:55.817Z,1516731055.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:56.206Z,1516731056.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:56.221Z,1516731056.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:56.595Z,1516731056.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:56.628Z,1516731056.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:57.012Z,1516731057.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:57.032Z,1516731057.032 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:57.032Z,1516731057.032 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 297 2018-01-23T18:10:57.033Z,1516731057.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:10:57.034Z,1516731057.034 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:57.034Z,1516731057.034 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 297 2018-01-23T18:10:57.035Z,1516731057.035 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:10:57.095Z,1516731057.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:10:57.095Z,1516731057.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:10:57.419Z,1516731057.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:57.445Z,1516731057.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:10:57.445Z,1516731057.445 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 297 2018-01-23T18:10:57.445Z,1516731057.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:10:57.445Z,1516731057.445 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 297 2018-01-23T18:10:57.808Z,1516731057.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:57.828Z,1516731057.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:10:57.828Z,1516731057.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:10:57.829Z,1516731057.829 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:10:57.829Z,1516731057.829 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:10:57.829Z,1516731057.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:10:57.830Z,1516731057.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:10:58.192Z,1516731058.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:58.229Z,1516731058.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:10:58.230Z,1516731058.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:58.592Z,1516731058.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:58.628Z,1516731058.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:10:58.629Z,1516731058.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:58.992Z,1516731058.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:59.021Z,1516731059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:10:59.021Z,1516731059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:59.393Z,1516731059.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:59.431Z,1516731059.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:10:59.432Z,1516731059.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:10:59.792Z,1516731059.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:10:59.828Z,1516731059.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:10:59.829Z,1516731059.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:00.203Z,1516731060.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:00.234Z,1516731060.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:11:00.239Z,1516731060.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:00.615Z,1516731060.615 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:00.640Z,1516731060.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:11:00.641Z,1516731060.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:01.007Z,1516731061.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:01.038Z,1516731061.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:11:01.043Z,1516731061.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:01.398Z,1516731061.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:01.417Z,1516731061.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:11:01.418Z,1516731061.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:01.800Z,1516731061.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:01.815Z,1516731061.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:11:01.816Z,1516731061.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:02.198Z,1516731062.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:02.221Z,1516731062.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:11:02.222Z,1516731062.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:02.601Z,1516731062.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:02.615Z,1516731062.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:11:02.616Z,1516731062.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:03.003Z,1516731063.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:03.018Z,1516731063.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:11:03.019Z,1516731063.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:03.407Z,1516731063.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:03.422Z,1516731063.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:11:03.423Z,1516731063.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:03.804Z,1516731063.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:03.818Z,1516731063.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:11:03.819Z,1516731063.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:04.200Z,1516731064.200 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:04.214Z,1516731064.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:11:04.215Z,1516731064.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:04.596Z,1516731064.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:04.619Z,1516731064.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:11:04.620Z,1516731064.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:04.996Z,1516731064.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:05.018Z,1516731065.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:11:05.023Z,1516731065.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:05.393Z,1516731065.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:05.426Z,1516731065.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:11:05.427Z,1516731065.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:05.792Z,1516731065.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:05.828Z,1516731065.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:11:05.829Z,1516731065.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:06.216Z,1516731066.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:06.230Z,1516731066.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:11:06.232Z,1516731066.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:06.616Z,1516731066.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:06.631Z,1516731066.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:11:06.631Z,1516731066.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:07.012Z,1516731067.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:07.034Z,1516731067.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:11:07.039Z,1516731067.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:07.400Z,1516731067.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:07.426Z,1516731067.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:11:07.427Z,1516731067.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:07.797Z,1516731067.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:07.830Z,1516731067.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:11:07.831Z,1516731067.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:08.198Z,1516731068.198 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:08.228Z,1516731068.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:11:08.229Z,1516731068.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:08.593Z,1516731068.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:08.629Z,1516731068.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:11:08.630Z,1516731068.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:09.043Z,1516731069.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:11:09.044Z,1516731069.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:09.440Z,1516731069.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:11:09.441Z,1516731069.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:09.835Z,1516731069.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:11:09.836Z,1516731069.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:10.229Z,1516731070.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:11:10.230Z,1516731070.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:10.605Z,1516731070.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:11:10.606Z,1516731070.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:11.029Z,1516731071.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:11:11.030Z,1516731071.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:11.407Z,1516731071.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:11:11.408Z,1516731071.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:11.813Z,1516731071.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:11:11.814Z,1516731071.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:12.242Z,1516731072.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:11:12.243Z,1516731072.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:12.644Z,1516731072.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:11:12.645Z,1516731072.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:13.021Z,1516731073.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:11:13.022Z,1516731073.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:13.415Z,1516731073.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:11:13.416Z,1516731073.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:13.815Z,1516731073.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:11:13.816Z,1516731073.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:14.216Z,1516731074.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:11:14.217Z,1516731074.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:14.624Z,1516731074.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:11:14.625Z,1516731074.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:15.018Z,1516731075.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:11:15.019Z,1516731075.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:15.422Z,1516731075.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:11:15.423Z,1516731075.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:15.818Z,1516731075.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:11:15.819Z,1516731075.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:16.220Z,1516731076.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:11:16.221Z,1516731076.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:16.617Z,1516731076.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:11:16.618Z,1516731076.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:17.016Z,1516731077.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:11:17.017Z,1516731077.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:17.416Z,1516731077.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:17.822Z,1516731077.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:18.229Z,1516731078.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:18.622Z,1516731078.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:19.029Z,1516731079.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:19.420Z,1516731079.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:19.817Z,1516731079.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:20.218Z,1516731080.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:20.616Z,1516731080.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:21.026Z,1516731081.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:21.433Z,1516731081.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:21.826Z,1516731081.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:22.217Z,1516731082.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:22.621Z,1516731082.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:23.017Z,1516731083.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:23.430Z,1516731083.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:23.818Z,1516731083.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:24.230Z,1516731084.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:24.630Z,1516731084.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:25.026Z,1516731085.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:25.418Z,1516731085.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:25.821Z,1516731085.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:26.218Z,1516731086.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:26.629Z,1516731086.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:27.026Z,1516731087.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:27.430Z,1516731087.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:27.825Z,1516731087.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:28.217Z,1516731088.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:28.617Z,1516731088.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:29.025Z,1516731089.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:29.417Z,1516731089.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:29.817Z,1516731089.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:30.230Z,1516731090.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:30.630Z,1516731090.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:31.027Z,1516731091.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:31.423Z,1516731091.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:31.827Z,1516731091.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:32.217Z,1516731092.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:32.623Z,1516731092.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:33.026Z,1516731093.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:33.437Z,1516731093.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:33.837Z,1516731093.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:34.193Z,1516731094.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:34.229Z,1516731094.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:34.592Z,1516731094.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:34.656Z,1516731094.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:34.992Z,1516731094.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:35.018Z,1516731095.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:35.393Z,1516731095.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:35.432Z,1516731095.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:35.792Z,1516731095.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:35.818Z,1516731095.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:36.222Z,1516731096.222 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:36.237Z,1516731096.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:36.616Z,1516731096.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:36.636Z,1516731096.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:37.008Z,1516731097.008 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:37.038Z,1516731097.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:37.392Z,1516731097.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:37.418Z,1516731097.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:37.793Z,1516731097.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:37.821Z,1516731097.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:38.197Z,1516731098.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:38.223Z,1516731098.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:38.592Z,1516731098.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:38.625Z,1516731098.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:39.012Z,1516731099.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:39.032Z,1516731099.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:39.415Z,1516731099.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:39.430Z,1516731099.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:39.808Z,1516731099.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:39.829Z,1516731099.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:40.193Z,1516731100.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:40.230Z,1516731100.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:40.596Z,1516731100.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:40.622Z,1516731100.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:40.992Z,1516731100.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:41.018Z,1516731101.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:41.393Z,1516731101.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:41.429Z,1516731101.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:41.796Z,1516731101.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:41.822Z,1516731101.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:42.211Z,1516731102.211 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:11:42.226Z,1516731102.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:42.632Z,1516731102.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:43.036Z,1516731103.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:43.427Z,1516731103.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:43.824Z,1516731103.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:44.228Z,1516731104.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:44.633Z,1516731104.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:45.045Z,1516731105.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:48.135Z,1516731108.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:48.281Z,1516731108.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:48.608Z,1516731108.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:49.005Z,1516731109.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:49.409Z,1516731109.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:49.805Z,1516731109.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:50.216Z,1516731110.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:50.621Z,1516731110.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:51.014Z,1516731111.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:51.409Z,1516731111.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:51.805Z,1516731111.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:52.203Z,1516731112.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:52.608Z,1516731112.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:53.017Z,1516731113.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:53.413Z,1516731113.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:53.812Z,1516731113.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:54.211Z,1516731114.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:54.608Z,1516731114.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:55.012Z,1516731115.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:55.415Z,1516731115.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:55.811Z,1516731115.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:56.205Z,1516731116.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:56.605Z,1516731116.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:57.012Z,1516731117.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:57.415Z,1516731117.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:57.811Z,1516731117.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:58.208Z,1516731118.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:58.613Z,1516731118.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:59.015Z,1516731119.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:59.414Z,1516731119.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:11:59.811Z,1516731119.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:00.212Z,1516731120.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:00.609Z,1516731120.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:01.018Z,1516731121.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:01.415Z,1516731121.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:01.816Z,1516731121.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:02.208Z,1516731122.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:02.605Z,1516731122.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:03.011Z,1516731123.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:03.420Z,1516731123.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:03.818Z,1516731123.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:04.208Z,1516731124.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:04.605Z,1516731124.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:05.021Z,1516731125.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:05.425Z,1516731125.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:05.815Z,1516731125.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:06.202Z,1516731126.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:06.605Z,1516731126.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:07.015Z,1516731127.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:07.414Z,1516731127.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:07.820Z,1516731127.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:08.203Z,1516731128.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:08.608Z,1516731128.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:09.010Z,1516731129.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:09.420Z,1516731129.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:09.814Z,1516731129.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:10.209Z,1516731130.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:10.615Z,1516731130.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:11.021Z,1516731131.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:11.417Z,1516731131.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:11.818Z,1516731131.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:12.206Z,1516731132.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:12.601Z,1516731132.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:13.014Z,1516731133.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:13.418Z,1516731133.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:13.818Z,1516731133.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:14.214Z,1516731134.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:14.608Z,1516731134.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:15.018Z,1516731135.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:15.428Z,1516731135.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:15.820Z,1516731135.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:16.204Z,1516731136.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:16.594Z,1516731136.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:17.016Z,1516731137.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:17.426Z,1516731137.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:17.814Z,1516731137.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:18.200Z,1516731138.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:18.602Z,1516731138.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:19.021Z,1516731139.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:19.414Z,1516731139.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:19.814Z,1516731139.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:20.180Z,1516731140.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:20.216Z,1516731140.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:20.585Z,1516731140.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:20.612Z,1516731140.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:20.987Z,1516731140.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:21.025Z,1516731141.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:21.421Z,1516731141.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:21.814Z,1516731141.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:22.214Z,1516731142.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:22.614Z,1516731142.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:23.020Z,1516731143.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:23.422Z,1516731143.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:23.818Z,1516731143.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:24.208Z,1516731144.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:24.614Z,1516731144.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:25.025Z,1516731145.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:25.428Z,1516731145.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:25.817Z,1516731145.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:26.218Z,1516731146.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:26.612Z,1516731146.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:27.024Z,1516731147.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:27.426Z,1516731147.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:27.828Z,1516731147.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:28.223Z,1516731148.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:28.602Z,1516731148.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:29.029Z,1516731149.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:29.425Z,1516731149.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:29.831Z,1516731149.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:30.215Z,1516731150.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:30.608Z,1516731150.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:31.017Z,1516731151.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:31.417Z,1516731151.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:31.813Z,1516731151.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:32.179Z,1516731152.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:32.217Z,1516731152.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:32.581Z,1516731152.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:32.613Z,1516731152.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:32.977Z,1516731152.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:33.019Z,1516731153.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:33.392Z,1516731153.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:33.429Z,1516731153.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:33.805Z,1516731153.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:33.820Z,1516731153.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:34.188Z,1516731154.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:34.229Z,1516731154.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:34.577Z,1516731154.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:34.618Z,1516731154.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:34.983Z,1516731154.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:34.990Z,1516731154.990 [PNI_TCM](ERROR): CRC does not match. Expected:0x1968 got:0x7618 2018-01-23T18:12:35.020Z,1516731155.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:35.379Z,1516731155.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:35.417Z,1516731155.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:35.777Z,1516731155.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:35.821Z,1516731155.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:36.190Z,1516731156.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:36.228Z,1516731156.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:36.593Z,1516731156.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:36.629Z,1516731156.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:36.995Z,1516731156.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:37.029Z,1516731157.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:37.382Z,1516731157.382 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:37.418Z,1516731157.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:37.782Z,1516731157.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:37.812Z,1516731157.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:38.189Z,1516731158.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:38.203Z,1516731158.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:38.591Z,1516731158.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:38.606Z,1516731158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:38.983Z,1516731158.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:39.026Z,1516731159.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:39.388Z,1516731159.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:39.407Z,1516731159.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:39.793Z,1516731159.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:39.809Z,1516731159.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:40.194Z,1516731160.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:40.210Z,1516731160.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:40.586Z,1516731160.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:40.614Z,1516731160.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:40.989Z,1516731160.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:41.007Z,1516731161.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:41.385Z,1516731161.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:41.407Z,1516731161.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:41.788Z,1516731161.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:41.803Z,1516731161.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:42.190Z,1516731162.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:42.231Z,1516731162.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:42.605Z,1516731162.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:42.636Z,1516731162.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:42.997Z,1516731162.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:43.012Z,1516731163.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:43.383Z,1516731163.383 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:43.406Z,1516731163.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:43.784Z,1516731163.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:43.821Z,1516731163.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:44.190Z,1516731164.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:44.208Z,1516731164.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:44.584Z,1516731164.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:44.608Z,1516731164.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:44.984Z,1516731164.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:45.007Z,1516731165.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:45.394Z,1516731165.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:45.424Z,1516731165.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:48.489Z,1516731168.489 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:48.509Z,1516731168.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:48.635Z,1516731168.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:48.657Z,1516731168.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:48.965Z,1516731168.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:49.008Z,1516731169.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:49.363Z,1516731169.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:49.377Z,1516731169.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:49.757Z,1516731169.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:49.777Z,1516731169.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:50.167Z,1516731170.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:50.182Z,1516731170.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:50.567Z,1516731170.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:50.589Z,1516731170.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:50.964Z,1516731170.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:50.985Z,1516731170.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:51.360Z,1516731171.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:51.379Z,1516731171.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:51.757Z,1516731171.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:51.781Z,1516731171.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:52.158Z,1516731172.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:52.179Z,1516731172.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:52.557Z,1516731172.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:52.580Z,1516731172.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:52.956Z,1516731172.956 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:52.988Z,1516731172.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:53.368Z,1516731173.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:53.383Z,1516731173.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:53.767Z,1516731173.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:53.782Z,1516731173.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:54.168Z,1516731174.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:54.183Z,1516731174.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:54.556Z,1516731174.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:54.589Z,1516731174.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:54.965Z,1516731174.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:54.985Z,1516731174.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:55.362Z,1516731175.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:55.386Z,1516731175.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:55.753Z,1516731175.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:55.784Z,1516731175.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:56.164Z,1516731176.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:56.190Z,1516731176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:56.567Z,1516731176.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:56.608Z,1516731176.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:56.964Z,1516731176.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:56.990Z,1516731176.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:57.353Z,1516731177.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:57.393Z,1516731177.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:57.757Z,1516731177.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:57.798Z,1516731177.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:58.155Z,1516731178.155 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:58.170Z,1516731178.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:58.564Z,1516731178.564 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:58.608Z,1516731178.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:58.965Z,1516731178.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:58.981Z,1516731178.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:59.368Z,1516731179.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:59.383Z,1516731179.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:12:59.767Z,1516731179.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:12:59.782Z,1516731179.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:00.168Z,1516731180.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:00.183Z,1516731180.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:00.557Z,1516731180.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:00.585Z,1516731180.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:00.963Z,1516731180.963 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:00.977Z,1516731180.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:01.368Z,1516731181.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:01.383Z,1516731181.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:01.760Z,1516731181.760 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:01.787Z,1516731181.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:02.169Z,1516731182.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:02.192Z,1516731182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:02.577Z,1516731182.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:02.597Z,1516731182.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:02.971Z,1516731182.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:02.991Z,1516731182.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:03.359Z,1516731183.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:03.390Z,1516731183.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:03.762Z,1516731183.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:03.785Z,1516731183.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:04.160Z,1516731184.160 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:04.180Z,1516731184.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:04.555Z,1516731184.555 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:04.590Z,1516731184.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:04.962Z,1516731184.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:04.978Z,1516731184.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:05.370Z,1516731185.370 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:05.399Z,1516731185.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:05.776Z,1516731185.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:05.792Z,1516731185.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:06.168Z,1516731186.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:06.200Z,1516731186.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:06.553Z,1516731186.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:06.584Z,1516731186.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:06.953Z,1516731186.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:06.989Z,1516731186.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:07.354Z,1516731187.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:07.369Z,1516731187.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:07.757Z,1516731187.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:07.777Z,1516731187.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:08.171Z,1516731188.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:08.206Z,1516731188.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:08.579Z,1516731188.579 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:08.613Z,1516731188.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:08.972Z,1516731188.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:09.005Z,1516731189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:09.366Z,1516731189.366 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:09.401Z,1516731189.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:09.761Z,1516731189.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:09.776Z,1516731189.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:10.158Z,1516731190.158 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:10.181Z,1516731190.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:10.563Z,1516731190.563 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:10.579Z,1516731190.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:10.960Z,1516731190.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:10.984Z,1516731190.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:11.368Z,1516731191.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:11.383Z,1516731191.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:11.768Z,1516731191.768 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:11.784Z,1516731191.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:12.168Z,1516731192.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:12.189Z,1516731192.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:12.556Z,1516731192.556 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:12.589Z,1516731192.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:12.961Z,1516731192.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:12.977Z,1516731192.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:13.362Z,1516731193.362 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:13.378Z,1516731193.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:13.761Z,1516731193.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:13.780Z,1516731193.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:14.172Z,1516731194.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:14.188Z,1516731194.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:14.575Z,1516731194.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:14.590Z,1516731194.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:14.968Z,1516731194.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:14.996Z,1516731194.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:15.365Z,1516731195.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:15.380Z,1516731195.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:15.752Z,1516731195.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:15.789Z,1516731195.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:16.165Z,1516731196.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:16.180Z,1516731196.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:16.554Z,1516731196.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:16.593Z,1516731196.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:16.952Z,1516731196.952 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:16.989Z,1516731196.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:17.368Z,1516731197.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:17.390Z,1516731197.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:17.775Z,1516731197.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:17.790Z,1516731197.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:18.171Z,1516731198.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:18.187Z,1516731198.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:18.553Z,1516731198.553 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:18.589Z,1516731198.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:18.957Z,1516731198.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:18.983Z,1516731198.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:19.354Z,1516731199.354 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:19.386Z,1516731199.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:19.753Z,1516731199.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:19.784Z,1516731199.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:20.180Z,1516731200.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:20.195Z,1516731200.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:20.577Z,1516731200.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:20.597Z,1516731200.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:20.976Z,1516731200.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:20.991Z,1516731200.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:21.353Z,1516731201.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:21.380Z,1516731201.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:21.757Z,1516731201.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:21.798Z,1516731201.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:22.157Z,1516731202.157 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:22.193Z,1516731202.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:22.554Z,1516731202.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:22.569Z,1516731202.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:22.953Z,1516731202.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:22.972Z,1516731202.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:23.371Z,1516731203.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:23.397Z,1516731203.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:23.785Z,1516731203.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:23.801Z,1516731203.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:24.171Z,1516731204.171 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:24.197Z,1516731204.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:24.561Z,1516731204.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:24.592Z,1516731204.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:24.961Z,1516731204.961 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:24.976Z,1516731204.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:25.358Z,1516731205.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:25.373Z,1516731205.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:25.761Z,1516731205.761 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:25.776Z,1516731205.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:26.167Z,1516731206.167 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:26.183Z,1516731206.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:26.567Z,1516731206.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:26.582Z,1516731206.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:26.964Z,1516731206.964 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:26.979Z,1516731206.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:27.360Z,1516731207.360 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:27.380Z,1516731207.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:27.762Z,1516731207.762 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:27.776Z,1516731207.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:28.159Z,1516731208.159 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:28.180Z,1516731208.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:28.558Z,1516731208.558 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:28.581Z,1516731208.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:28.962Z,1516731208.962 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:28.977Z,1516731208.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:29.367Z,1516731209.367 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:29.382Z,1516731209.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:29.767Z,1516731209.767 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:29.782Z,1516731209.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:30.168Z,1516731210.168 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:30.182Z,1516731210.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:30.561Z,1516731210.561 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:30.577Z,1516731210.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:30.960Z,1516731210.960 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:30.979Z,1516731210.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:31.363Z,1516731211.363 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:31.378Z,1516731211.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:31.757Z,1516731211.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:31.779Z,1516731211.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:32.165Z,1516731212.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:32.184Z,1516731212.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:32.571Z,1516731212.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:32.586Z,1516731212.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:32.971Z,1516731212.971 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:32.986Z,1516731212.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:33.359Z,1516731213.359 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:33.383Z,1516731213.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:33.752Z,1516731213.752 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:33.789Z,1516731213.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:34.165Z,1516731214.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:34.180Z,1516731214.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:34.554Z,1516731214.554 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:34.581Z,1516731214.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:34.957Z,1516731214.957 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:34.985Z,1516731214.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:35.376Z,1516731215.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:35.391Z,1516731215.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:35.776Z,1516731215.776 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:35.790Z,1516731215.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:36.173Z,1516731216.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:36.193Z,1516731216.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:36.557Z,1516731216.557 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:36.584Z,1516731216.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:36.953Z,1516731216.953 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:36.984Z,1516731216.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:37.358Z,1516731217.358 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:37.391Z,1516731217.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:37.753Z,1516731217.753 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:37.784Z,1516731217.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:38.164Z,1516731218.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:38.190Z,1516731218.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:38.567Z,1516731218.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:38.603Z,1516731218.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:38.980Z,1516731218.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:38.995Z,1516731218.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:39.353Z,1516731219.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:39.389Z,1516731219.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:39.757Z,1516731219.757 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:39.772Z,1516731219.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:40.161Z,1516731220.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:40.192Z,1516731220.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:40.562Z,1516731220.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:40.601Z,1516731220.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:40.965Z,1516731220.965 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:40.980Z,1516731220.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:41.371Z,1516731221.371 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:41.406Z,1516731221.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:41.775Z,1516731221.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:41.801Z,1516731221.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:42.179Z,1516731222.179 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:42.206Z,1516731222.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:42.562Z,1516731222.562 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:42.577Z,1516731222.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:42.959Z,1516731222.959 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:42.980Z,1516731222.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:43.365Z,1516731223.365 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:43.379Z,1516731223.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:43.759Z,1516731223.759 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:43.783Z,1516731223.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:43.785Z,1516731223.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:43.785Z,1516731223.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 298 2018-01-23T18:13:43.786Z,1516731223.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:13:43.810Z,1516731223.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:13:44.169Z,1516731224.169 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:44.193Z,1516731224.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:44.203Z,1516731224.203 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:13:44.203Z,1516731224.203 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:13:44.203Z,1516731224.203 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:13:44.203Z,1516731224.203 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:13:44.222Z,1516731224.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:13:44.222Z,1516731224.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 298 2018-01-23T18:13:44.578Z,1516731224.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:44.593Z,1516731224.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:44.594Z,1516731224.594 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:13:44.595Z,1516731224.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:13:44.595Z,1516731224.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:13:44.596Z,1516731224.596 [Default:CheckIn:D] Stopped 2018-01-23T18:13:44.596Z,1516731224.596 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:13:44.968Z,1516731224.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:44.995Z,1516731224.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:44.998Z,1516731224.998 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 895.875586 min 2018-01-23T18:13:44.998Z,1516731224.998 [Default:CheckIn:E] Stopped 2018-01-23T18:13:45.003Z,1516731225.003 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:13:45.006Z,1516731225.006 [Default:CheckIn] Stopped 2018-01-23T18:13:45.006Z,1516731225.006 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:13:45.006Z,1516731225.006 [Default:CheckIn](INFO): Running loop #88 2018-01-23T18:13:45.006Z,1516731225.006 [Default:CheckIn] Running Loop=88 2018-01-23T18:13:45.006Z,1516731225.006 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:13:45.011Z,1516731225.011 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:13:45.353Z,1516731225.353 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:45.380Z,1516731225.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:45.754Z,1516731225.754 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:45.796Z,1516731225.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:48.933Z,1516731228.933 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:48.950Z,1516731228.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:49.045Z,1516731229.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:49.089Z,1516731229.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:49.435Z,1516731229.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:49.456Z,1516731229.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:49.836Z,1516731229.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:49.857Z,1516731229.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:50.232Z,1516731230.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:50.246Z,1516731230.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:50.624Z,1516731230.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:50.640Z,1516731230.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:51.013Z,1516731231.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:51.049Z,1516731231.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:51.417Z,1516731231.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:51.444Z,1516731231.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:51.812Z,1516731231.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:51.852Z,1516731231.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:52.233Z,1516731232.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:52.249Z,1516731232.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:52.632Z,1516731232.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:52.659Z,1516731232.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:53.036Z,1516731233.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:53.051Z,1516731233.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:53.413Z,1516731233.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:53.448Z,1516731233.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:53.813Z,1516731233.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:53.844Z,1516731233.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:54.213Z,1516731234.213 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:54.228Z,1516731234.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:54.618Z,1516731234.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:54.633Z,1516731234.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:55.021Z,1516731235.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:55.036Z,1516731235.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:55.428Z,1516731235.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:55.467Z,1516731235.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:55.828Z,1516731235.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:55.859Z,1516731235.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:56.228Z,1516731236.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:56.243Z,1516731236.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:56.619Z,1516731236.619 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:56.649Z,1516731236.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:57.019Z,1516731237.019 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:57.034Z,1516731237.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:57.420Z,1516731237.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:57.440Z,1516731237.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:57.820Z,1516731237.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:57.840Z,1516731237.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:57.841Z,1516731237.841 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 298 2018-01-23T18:13:57.841Z,1516731237.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:13:57.842Z,1516731237.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:57.843Z,1516731237.843 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 298 2018-01-23T18:13:57.843Z,1516731237.843 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:13:57.884Z,1516731237.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:13:57.885Z,1516731237.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:13:58.226Z,1516731238.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:58.254Z,1516731238.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:13:58.254Z,1516731238.254 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 298 2018-01-23T18:13:58.267Z,1516731238.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:13:58.267Z,1516731238.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 298 2018-01-23T18:13:58.629Z,1516731238.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:58.648Z,1516731238.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:13:58.648Z,1516731238.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:13:58.648Z,1516731238.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:13:58.649Z,1516731238.649 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:13:58.649Z,1516731238.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:13:58.649Z,1516731238.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:13:59.031Z,1516731239.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:59.052Z,1516731239.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:13:59.053Z,1516731239.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:59.421Z,1516731239.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:59.436Z,1516731239.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:13:59.437Z,1516731239.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:13:59.815Z,1516731239.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:13:59.847Z,1516731239.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:13:59.848Z,1516731239.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:00.220Z,1516731240.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:00.240Z,1516731240.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:14:00.241Z,1516731240.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:00.611Z,1516731240.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:00.641Z,1516731240.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:14:00.642Z,1516731240.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:01.013Z,1516731241.013 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:01.048Z,1516731241.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:14:01.049Z,1516731241.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:01.430Z,1516731241.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:01.445Z,1516731241.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:14:01.445Z,1516731241.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:01.835Z,1516731241.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:01.850Z,1516731241.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:14:01.851Z,1516731241.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:02.228Z,1516731242.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:02.248Z,1516731242.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:14:02.249Z,1516731242.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:02.612Z,1516731242.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:02.638Z,1516731242.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:14:02.639Z,1516731242.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:03.010Z,1516731243.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:03.049Z,1516731243.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:14:03.051Z,1516731243.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:03.417Z,1516731243.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:03.443Z,1516731243.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:14:03.444Z,1516731243.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:03.812Z,1516731243.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:03.847Z,1516731243.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:14:03.848Z,1516731243.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:04.231Z,1516731244.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:04.246Z,1516731244.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:14:04.247Z,1516731244.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:04.632Z,1516731244.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:04.650Z,1516731244.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:14:04.655Z,1516731244.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:05.032Z,1516731245.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:05.046Z,1516731245.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:14:05.047Z,1516731245.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:05.413Z,1516731245.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:05.439Z,1516731245.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:14:05.440Z,1516731245.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:05.813Z,1516731245.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:05.848Z,1516731245.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:14:05.849Z,1516731245.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:06.212Z,1516731246.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:06.250Z,1516731246.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:14:06.251Z,1516731246.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:06.617Z,1516731246.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:06.667Z,1516731246.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:14:06.668Z,1516731246.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:07.017Z,1516731247.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:07.048Z,1516731247.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:14:07.049Z,1516731247.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:07.423Z,1516731247.423 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:07.456Z,1516731247.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:14:07.457Z,1516731247.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:07.840Z,1516731247.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:07.854Z,1516731247.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:14:07.855Z,1516731247.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:08.223Z,1516731248.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:08.260Z,1516731248.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:14:08.261Z,1516731248.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:08.612Z,1516731248.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:08.648Z,1516731248.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:14:08.649Z,1516731248.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:09.010Z,1516731249.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:09.025Z,1516731249.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:14:09.026Z,1516731249.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:09.414Z,1516731249.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:09.428Z,1516731249.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:14:09.429Z,1516731249.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:09.812Z,1516731249.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:09.832Z,1516731249.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:14:09.833Z,1516731249.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:10.223Z,1516731250.223 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:10.250Z,1516731250.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:14:10.255Z,1516731250.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:10.635Z,1516731250.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:10.668Z,1516731250.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:14:10.669Z,1516731250.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:11.027Z,1516731251.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:11.064Z,1516731251.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:14:11.065Z,1516731251.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:11.421Z,1516731251.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:11.435Z,1516731251.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:14:11.436Z,1516731251.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:11.821Z,1516731251.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:11.840Z,1516731251.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:14:11.841Z,1516731251.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:12.218Z,1516731252.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:12.242Z,1516731252.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:14:12.243Z,1516731252.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:12.618Z,1516731252.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:12.637Z,1516731252.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:14:12.638Z,1516731252.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:13.018Z,1516731253.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:13.041Z,1516731253.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:14:13.042Z,1516731253.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:13.430Z,1516731253.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:13.445Z,1516731253.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:14:13.446Z,1516731253.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:13.832Z,1516731253.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:13.846Z,1516731253.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:14:13.847Z,1516731253.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:14.228Z,1516731254.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:14.255Z,1516731254.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:14:14.256Z,1516731254.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:14.611Z,1516731254.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:14.637Z,1516731254.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:14:14.638Z,1516731254.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:15.010Z,1516731255.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:15.044Z,1516731255.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:14:15.045Z,1516731255.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:15.414Z,1516731255.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:15.439Z,1516731255.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:14:15.440Z,1516731255.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:15.812Z,1516731255.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:15.847Z,1516731255.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:14:15.848Z,1516731255.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:16.232Z,1516731256.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:16.246Z,1516731256.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:14:16.248Z,1516731256.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:16.632Z,1516731256.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:16.650Z,1516731256.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:14:16.655Z,1516731256.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:17.031Z,1516731257.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:17.052Z,1516731257.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:14:17.053Z,1516731257.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:17.417Z,1516731257.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:17.443Z,1516731257.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:14:17.444Z,1516731257.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:17.812Z,1516731257.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:17.848Z,1516731257.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:18.212Z,1516731258.212 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:18.249Z,1516731258.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:18.617Z,1516731258.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:18.644Z,1516731258.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:19.012Z,1516731259.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:19.045Z,1516731259.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:19.426Z,1516731259.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:19.451Z,1516731259.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:19.823Z,1516731259.823 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:19.850Z,1516731259.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:20.227Z,1516731260.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:20.253Z,1516731260.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:20.612Z,1516731260.612 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:20.632Z,1516731260.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:21.010Z,1516731261.010 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:21.025Z,1516731261.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:21.425Z,1516731261.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:21.455Z,1516731261.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:21.818Z,1516731261.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:21.856Z,1516731261.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:22.227Z,1516731262.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:22.253Z,1516731262.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:22.646Z,1516731262.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:22.661Z,1516731262.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:23.042Z,1516731263.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:23.057Z,1516731263.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:23.420Z,1516731263.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:23.452Z,1516731263.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:23.821Z,1516731263.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:23.836Z,1516731263.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:24.218Z,1516731264.218 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:24.232Z,1516731264.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:24.621Z,1516731264.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:24.636Z,1516731264.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:25.018Z,1516731265.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:25.037Z,1516731265.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:25.427Z,1516731265.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:25.442Z,1516731265.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:25.827Z,1516731265.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:25.842Z,1516731265.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:26.239Z,1516731266.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:26.261Z,1516731266.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:26.626Z,1516731266.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:26.641Z,1516731266.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:27.018Z,1516731267.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:27.042Z,1516731267.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:27.425Z,1516731267.425 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:27.445Z,1516731267.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:27.821Z,1516731267.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:27.836Z,1516731267.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:28.225Z,1516731268.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:28.252Z,1516731268.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:28.632Z,1516731268.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:28.653Z,1516731268.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:29.031Z,1516731269.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:29.046Z,1516731269.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:29.428Z,1516731269.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:29.443Z,1516731269.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:29.815Z,1516731269.815 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:29.842Z,1516731269.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:30.236Z,1516731270.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:30.251Z,1516731270.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:30.633Z,1516731270.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:30.649Z,1516731270.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:31.032Z,1516731271.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:31.048Z,1516731271.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:31.413Z,1516731271.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:31.449Z,1516731271.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:31.810Z,1516731271.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:31.849Z,1516731271.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:32.232Z,1516731272.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:32.247Z,1516731272.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:32.636Z,1516731272.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:32.650Z,1516731272.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:33.033Z,1516731273.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:33.048Z,1516731273.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:33.414Z,1516731273.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:33.453Z,1516731273.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:33.817Z,1516731273.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:33.850Z,1516731273.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:34.224Z,1516731274.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:34.255Z,1516731274.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:34.628Z,1516731274.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:34.665Z,1516731274.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:35.032Z,1516731275.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:35.057Z,1516731275.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:35.422Z,1516731275.422 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:35.458Z,1516731275.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:35.487Z,1516731275.487 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:14:35.821Z,1516731275.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:35.837Z,1516731275.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:36.232Z,1516731276.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:36.265Z,1516731276.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:36.627Z,1516731276.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:36.642Z,1516731276.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:37.028Z,1516731277.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:37.043Z,1516731277.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:37.420Z,1516731277.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:37.435Z,1516731277.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:37.817Z,1516731277.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:37.836Z,1516731277.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:38.224Z,1516731278.224 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:38.239Z,1516731278.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:38.627Z,1516731278.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:38.642Z,1516731278.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:39.024Z,1516731279.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:39.051Z,1516731279.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:39.417Z,1516731279.417 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:39.439Z,1516731279.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:39.827Z,1516731279.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:39.842Z,1516731279.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:40.230Z,1516731280.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:40.246Z,1516731280.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:40.630Z,1516731280.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:40.649Z,1516731280.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:41.028Z,1516731281.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:41.048Z,1516731281.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:41.426Z,1516731281.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:41.441Z,1516731281.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:41.816Z,1516731281.816 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:41.834Z,1516731281.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:42.230Z,1516731282.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:42.245Z,1516731282.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:42.634Z,1516731282.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:42.649Z,1516731282.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:43.031Z,1516731283.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:43.046Z,1516731283.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:43.421Z,1516731283.421 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:43.436Z,1516731283.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:43.821Z,1516731283.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:43.836Z,1516731283.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:44.228Z,1516731284.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:44.251Z,1516731284.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:44.635Z,1516731284.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:44.665Z,1516731284.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:45.032Z,1516731285.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:45.047Z,1516731285.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:45.413Z,1516731285.413 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:45.445Z,1516731285.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:45.813Z,1516731285.813 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:45.848Z,1516731285.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:48.929Z,1516731288.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:48.945Z,1516731288.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:49.073Z,1516731289.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:49.109Z,1516731289.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:49.408Z,1516731289.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:49.431Z,1516731289.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:49.801Z,1516731289.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:49.840Z,1516731289.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:50.190Z,1516731290.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:50.205Z,1516731290.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:50.601Z,1516731290.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:50.633Z,1516731290.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:50.996Z,1516731290.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:51.011Z,1516731291.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:51.412Z,1516731291.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:51.442Z,1516731291.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:51.807Z,1516731291.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:51.822Z,1516731291.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:52.199Z,1516731292.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:52.220Z,1516731292.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:52.598Z,1516731292.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:52.613Z,1516731292.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:52.994Z,1516731292.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:53.017Z,1516731293.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:53.397Z,1516731293.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:53.411Z,1516731293.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:53.796Z,1516731293.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:53.815Z,1516731293.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:54.195Z,1516731294.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:54.210Z,1516731294.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:54.603Z,1516731294.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:54.624Z,1516731294.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:55.002Z,1516731295.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:55.025Z,1516731295.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:55.402Z,1516731295.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:55.425Z,1516731295.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:55.798Z,1516731295.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:55.813Z,1516731295.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:56.197Z,1516731296.197 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:56.212Z,1516731296.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:56.593Z,1516731296.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:56.620Z,1516731296.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:57.002Z,1516731297.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:57.017Z,1516731297.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:57.406Z,1516731297.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:57.429Z,1516731297.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:57.811Z,1516731297.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:57.826Z,1516731297.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:58.207Z,1516731298.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:58.228Z,1516731298.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:58.601Z,1516731298.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:58.617Z,1516731298.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:58.996Z,1516731298.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:59.015Z,1516731299.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:59.398Z,1516731299.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:59.417Z,1516731299.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:14:59.796Z,1516731299.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:14:59.816Z,1516731299.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:00.192Z,1516731300.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:00.219Z,1516731300.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:00.609Z,1516731300.609 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:00.624Z,1516731300.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:01.012Z,1516731301.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:01.027Z,1516731301.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:01.406Z,1516731301.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:01.422Z,1516731301.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:01.788Z,1516731301.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:01.828Z,1516731301.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:02.186Z,1516731302.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:02.225Z,1516731302.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:02.593Z,1516731302.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:02.620Z,1516731302.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:02.989Z,1516731302.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:03.022Z,1516731303.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:03.419Z,1516731303.419 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:03.434Z,1516731303.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:03.812Z,1516731303.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:03.827Z,1516731303.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:04.203Z,1516731304.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:04.239Z,1516731304.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:04.586Z,1516731304.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:04.619Z,1516731304.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:04.988Z,1516731304.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:05.028Z,1516731305.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:05.392Z,1516731305.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:05.427Z,1516731305.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:05.793Z,1516731305.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:05.829Z,1516731305.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:06.192Z,1516731306.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:06.230Z,1516731306.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:06.603Z,1516731306.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:06.633Z,1516731306.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:06.999Z,1516731306.999 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:07.026Z,1516731307.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:07.412Z,1516731307.412 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:07.444Z,1516731307.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:07.793Z,1516731307.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:07.808Z,1516731307.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:08.191Z,1516731308.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:08.206Z,1516731308.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:08.602Z,1516731308.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:08.617Z,1516731308.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:08.997Z,1516731308.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:09.012Z,1516731309.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:09.404Z,1516731309.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:09.420Z,1516731309.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:09.804Z,1516731309.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:09.819Z,1516731309.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:10.203Z,1516731310.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:10.224Z,1516731310.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:10.602Z,1516731310.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:10.618Z,1516731310.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:11.002Z,1516731311.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:11.018Z,1516731311.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:11.399Z,1516731311.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:11.414Z,1516731311.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:11.797Z,1516731311.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:11.816Z,1516731311.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:12.195Z,1516731312.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:12.215Z,1516731312.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:12.604Z,1516731312.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:12.624Z,1516731312.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:13.003Z,1516731313.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:13.018Z,1516731313.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:13.403Z,1516731313.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:13.418Z,1516731313.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:13.798Z,1516731313.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:13.813Z,1516731313.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:14.192Z,1516731314.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:14.213Z,1516731314.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:14.593Z,1516731314.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:14.616Z,1516731314.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:14.997Z,1516731314.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:15.013Z,1516731315.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:15.402Z,1516731315.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:15.425Z,1516731315.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:15.806Z,1516731315.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:15.821Z,1516731315.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:16.207Z,1516731316.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:16.225Z,1516731316.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:16.601Z,1516731316.601 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:16.617Z,1516731316.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:16.996Z,1516731316.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:17.015Z,1516731317.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:17.403Z,1516731317.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:17.418Z,1516731317.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:17.796Z,1516731317.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:17.816Z,1516731317.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:18.192Z,1516731318.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:18.215Z,1516731318.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:18.607Z,1516731318.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:18.628Z,1516731318.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:19.007Z,1516731319.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:19.022Z,1516731319.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:19.407Z,1516731319.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:19.422Z,1516731319.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:19.797Z,1516731319.797 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:19.812Z,1516731319.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:20.192Z,1516731320.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:20.215Z,1516731320.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:20.596Z,1516731320.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:20.616Z,1516731320.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:20.998Z,1516731320.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:21.013Z,1516731321.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:21.407Z,1516731321.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:21.429Z,1516731321.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:21.810Z,1516731321.810 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:21.825Z,1516731321.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:22.208Z,1516731322.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:22.223Z,1516731322.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:22.592Z,1516731322.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:22.617Z,1516731322.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:22.992Z,1516731322.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:23.024Z,1516731323.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:23.401Z,1516731323.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:23.416Z,1516731323.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:23.798Z,1516731323.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:23.813Z,1516731323.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:24.191Z,1516731324.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:24.224Z,1516731324.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:24.608Z,1516731324.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:24.623Z,1516731324.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:25.006Z,1516731325.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:25.025Z,1516731325.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:25.407Z,1516731325.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:25.429Z,1516731325.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:25.801Z,1516731325.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:25.816Z,1516731325.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:26.186Z,1516731326.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:26.217Z,1516731326.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:26.602Z,1516731326.602 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:26.617Z,1516731326.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:27.005Z,1516731327.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:27.024Z,1516731327.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:27.411Z,1516731327.411 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:27.426Z,1516731327.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:27.811Z,1516731327.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:27.826Z,1516731327.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:28.205Z,1516731328.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:28.232Z,1516731328.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:28.587Z,1516731328.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:28.621Z,1516731328.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:28.988Z,1516731328.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:29.022Z,1516731329.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:29.389Z,1516731329.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:29.425Z,1516731329.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:29.789Z,1516731329.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:29.821Z,1516731329.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:30.192Z,1516731330.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:30.219Z,1516731330.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:30.608Z,1516731330.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:30.634Z,1516731330.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:31.005Z,1516731331.005 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:31.026Z,1516731331.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:31.404Z,1516731331.404 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:31.425Z,1516731331.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:31.789Z,1516731331.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:31.825Z,1516731331.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:32.190Z,1516731332.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:32.221Z,1516731332.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:32.589Z,1516731332.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:32.616Z,1516731332.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:32.992Z,1516731332.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:33.026Z,1516731333.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:33.399Z,1516731333.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:33.426Z,1516731333.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:33.811Z,1516731333.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:33.827Z,1516731333.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:34.199Z,1516731334.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:34.238Z,1516731334.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:34.588Z,1516731334.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:34.625Z,1516731334.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:34.988Z,1516731334.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:35.025Z,1516731335.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:35.389Z,1516731335.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:35.426Z,1516731335.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:35.789Z,1516731335.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:35.825Z,1516731335.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:36.187Z,1516731336.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:36.225Z,1516731336.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:36.617Z,1516731336.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:36.637Z,1516731336.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:37.015Z,1516731337.015 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:37.030Z,1516731337.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:37.399Z,1516731337.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:37.433Z,1516731337.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:37.789Z,1516731337.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:37.827Z,1516731337.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:38.188Z,1516731338.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:38.225Z,1516731338.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:38.589Z,1516731338.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:38.616Z,1516731338.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:38.993Z,1516731338.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:39.031Z,1516731339.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:39.399Z,1516731339.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:39.434Z,1516731339.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:39.803Z,1516731339.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:39.841Z,1516731339.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:40.203Z,1516731340.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:40.237Z,1516731340.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:40.588Z,1516731340.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:40.625Z,1516731340.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:40.992Z,1516731340.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:41.033Z,1516731341.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:41.397Z,1516731341.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:41.433Z,1516731341.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:41.796Z,1516731341.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:41.811Z,1516731341.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:42.194Z,1516731342.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:42.228Z,1516731342.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:42.611Z,1516731342.611 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:42.647Z,1516731342.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:43.004Z,1516731343.004 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:43.021Z,1516731343.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:43.405Z,1516731343.405 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:43.421Z,1516731343.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:43.799Z,1516731343.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:43.815Z,1516731343.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:44.192Z,1516731344.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:44.219Z,1516731344.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:44.589Z,1516731344.589 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:44.621Z,1516731344.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:44.989Z,1516731344.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:45.024Z,1516731345.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:45.406Z,1516731345.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:45.435Z,1516731345.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:45.812Z,1516731345.812 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:45.833Z,1516731345.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:46.204Z,1516731346.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:46.236Z,1516731346.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:49.288Z,1516731349.288 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:49.323Z,1516731349.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:49.418Z,1516731349.418 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:49.454Z,1516731349.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:49.799Z,1516731349.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:49.827Z,1516731349.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:50.203Z,1516731350.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:50.233Z,1516731350.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:50.599Z,1516731350.599 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:50.634Z,1516731350.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:50.989Z,1516731350.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:51.004Z,1516731351.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:51.387Z,1516731351.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:51.402Z,1516731351.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:51.784Z,1516731351.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:51.803Z,1516731351.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:52.185Z,1516731352.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:52.199Z,1516731352.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:52.588Z,1516731352.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:52.603Z,1516731352.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:52.992Z,1516731352.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:53.007Z,1516731353.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:53.387Z,1516731353.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:53.408Z,1516731353.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:53.784Z,1516731353.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:53.800Z,1516731353.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:54.184Z,1516731354.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:54.199Z,1516731354.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:54.585Z,1516731354.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:54.600Z,1516731354.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:54.984Z,1516731354.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:54.999Z,1516731354.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:55.387Z,1516731355.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:55.402Z,1516731355.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:55.791Z,1516731355.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:55.812Z,1516731355.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:56.199Z,1516731356.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:56.214Z,1516731356.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:56.585Z,1516731356.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:56.600Z,1516731356.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:56.983Z,1516731356.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:57.011Z,1516731357.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:57.385Z,1516731357.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:57.400Z,1516731357.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:57.785Z,1516731357.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:57.800Z,1516731357.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:58.185Z,1516731358.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:58.200Z,1516731358.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:58.590Z,1516731358.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:58.605Z,1516731358.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:58.991Z,1516731358.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:59.006Z,1516731359.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:59.391Z,1516731359.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:59.405Z,1516731359.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:15:59.784Z,1516731359.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:15:59.798Z,1516731359.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:00.181Z,1516731360.181 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:00.202Z,1516731360.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:00.586Z,1516731360.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:00.601Z,1516731360.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:00.985Z,1516731360.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:00.000Z,1516731361.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:01.390Z,1516731361.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:01.413Z,1516731361.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:01.791Z,1516731361.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:01.806Z,1516731361.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:02.192Z,1516731362.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:02.207Z,1516731362.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:02.584Z,1516731362.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:02.599Z,1516731362.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:02.985Z,1516731362.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:03.000Z,1516731363.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:03.385Z,1516731363.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:03.399Z,1516731363.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:03.780Z,1516731363.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:03.798Z,1516731363.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:04.185Z,1516731364.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:04.200Z,1516731364.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:04.595Z,1516731364.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:04.610Z,1516731364.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:04.994Z,1516731364.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:05.017Z,1516731365.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:05.395Z,1516731365.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:05.409Z,1516731365.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:05.789Z,1516731365.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:05.809Z,1516731365.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:06.184Z,1516731366.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:06.203Z,1516731366.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:06.586Z,1516731366.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:06.601Z,1516731366.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:06.985Z,1516731366.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:06.000Z,1516731367.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:07.394Z,1516731367.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:07.409Z,1516731367.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:07.795Z,1516731367.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:07.810Z,1516731367.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:08.194Z,1516731368.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:08.209Z,1516731368.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:08.583Z,1516731368.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:08.598Z,1516731368.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:08.985Z,1516731368.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:08.000Z,1516731369.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:09.385Z,1516731369.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:09.400Z,1516731369.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:09.781Z,1516731369.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:09.803Z,1516731369.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:10.185Z,1516731370.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:10.200Z,1516731370.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:10.594Z,1516731370.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:10.609Z,1516731370.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:10.994Z,1516731370.994 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:11.009Z,1516731371.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:11.395Z,1516731371.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:11.410Z,1516731371.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:11.785Z,1516731371.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:11.800Z,1516731371.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:12.180Z,1516731372.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:12.211Z,1516731372.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:12.590Z,1516731372.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:12.605Z,1516731372.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:12.989Z,1516731372.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:13.004Z,1516731373.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:13.394Z,1516731373.394 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:13.410Z,1516731373.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:13.799Z,1516731373.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:13.820Z,1516731373.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:14.199Z,1516731374.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:14.214Z,1516731374.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:14.584Z,1516731374.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:14.604Z,1516731374.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:14.984Z,1516731374.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:15.004Z,1516731375.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:15.399Z,1516731375.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:15.414Z,1516731375.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:15.799Z,1516731375.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:15.814Z,1516731375.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:16.194Z,1516731376.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:16.224Z,1516731376.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:16.590Z,1516731376.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:16.605Z,1516731376.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:16.976Z,1516731376.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:17.013Z,1516731377.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:17.401Z,1516731377.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:17.416Z,1516731377.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:17.804Z,1516731377.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:17.819Z,1516731377.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:18.204Z,1516731378.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:18.219Z,1516731378.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:18.578Z,1516731378.578 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:18.615Z,1516731378.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:18.977Z,1516731378.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:19.009Z,1516731379.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:19.400Z,1516731379.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:19.415Z,1516731379.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:19.801Z,1516731379.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:19.816Z,1516731379.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:20.204Z,1516731380.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:20.219Z,1516731380.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:20.577Z,1516731380.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:20.613Z,1516731380.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:20.980Z,1516731380.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:21.022Z,1516731381.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:21.392Z,1516731381.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:21.420Z,1516731381.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:21.804Z,1516731381.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:21.819Z,1516731381.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:22.187Z,1516731382.187 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:22.223Z,1516731382.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:22.577Z,1516731382.577 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:22.593Z,1516731382.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:22.976Z,1516731382.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:22.997Z,1516731382.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:23.399Z,1516731383.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:23.426Z,1516731383.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:23.795Z,1516731383.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:23.821Z,1516731383.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:24.199Z,1516731384.199 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:24.233Z,1516731384.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:24.582Z,1516731384.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:24.629Z,1516731384.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:24.983Z,1516731384.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:24.998Z,1516731384.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:25.395Z,1516731385.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:25.426Z,1516731385.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:25.799Z,1516731385.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:25.834Z,1516731385.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:26.188Z,1516731386.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:26.203Z,1516731386.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:26.590Z,1516731386.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:26.605Z,1516731386.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:26.986Z,1516731386.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:27.001Z,1516731387.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:27.387Z,1516731387.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:27.403Z,1516731387.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:27.791Z,1516731387.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:27.807Z,1516731387.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:28.202Z,1516731388.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:28.238Z,1516731388.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:28.587Z,1516731388.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:28.602Z,1516731388.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:28.982Z,1516731388.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:29.006Z,1516731389.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:29.391Z,1516731389.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:29.406Z,1516731389.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:29.799Z,1516731389.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:29.814Z,1516731389.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:30.203Z,1516731390.203 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:30.218Z,1516731390.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:30.591Z,1516731390.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:30.606Z,1516731390.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:30.981Z,1516731390.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:31.004Z,1516731391.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:31.399Z,1516731391.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:31.414Z,1516731391.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:31.799Z,1516731391.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:31.814Z,1516731391.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:32.196Z,1516731392.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:32.211Z,1516731392.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:32.593Z,1516731392.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:32.608Z,1516731392.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:32.987Z,1516731392.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:33.002Z,1516731393.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:33.398Z,1516731393.398 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:33.414Z,1516731393.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:33.798Z,1516731393.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:33.814Z,1516731393.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:34.196Z,1516731394.196 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:34.212Z,1516731394.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:34.586Z,1516731394.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:34.609Z,1516731394.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:34.984Z,1516731394.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:35.006Z,1516731395.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:35.407Z,1516731395.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:35.459Z,1516731395.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:35.801Z,1516731395.801 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:35.825Z,1516731395.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:36.209Z,1516731396.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:36.254Z,1516731396.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:36.583Z,1516731396.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:36.633Z,1516731396.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:36.983Z,1516731396.983 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:37.020Z,1516731397.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:37.410Z,1516731397.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:37.430Z,1516731397.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:37.806Z,1516731397.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:37.878Z,1516731397.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:38.206Z,1516731398.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:38.233Z,1516731398.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:38.587Z,1516731398.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:38.633Z,1516731398.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:38.997Z,1516731398.997 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:39.026Z,1516731399.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:39.415Z,1516731399.415 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:39.431Z,1516731399.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:39.811Z,1516731399.811 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:39.826Z,1516731399.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:40.193Z,1516731400.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:40.258Z,1516731400.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:40.583Z,1516731400.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:40.622Z,1516731400.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:40.982Z,1516731400.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:41.029Z,1516731401.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:41.400Z,1516731401.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:41.444Z,1516731401.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:41.796Z,1516731401.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:41.833Z,1516731401.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:42.202Z,1516731402.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:42.266Z,1516731402.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:42.585Z,1516731402.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:42.613Z,1516731402.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:42.985Z,1516731402.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:43.022Z,1516731403.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:43.406Z,1516731403.406 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:43.464Z,1516731403.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:43.806Z,1516731403.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:43.837Z,1516731403.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:44.208Z,1516731404.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:44.264Z,1516731404.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:44.586Z,1516731404.586 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:44.616Z,1516731404.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:44.623Z,1516731404.623 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:44.623Z,1516731404.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 299 2018-01-23T18:16:44.623Z,1516731404.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:16:44.660Z,1516731404.660 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:16:45.001Z,1516731405.001 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:45.056Z,1516731405.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:45.092Z,1516731405.092 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:16:45.093Z,1516731405.093 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 299 2018-01-23T18:16:45.401Z,1516731405.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:45.433Z,1516731405.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:45.434Z,1516731405.434 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:16:45.443Z,1516731405.443 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:16:45.443Z,1516731405.443 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:16:45.806Z,1516731405.806 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:45.854Z,1516731405.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:46.209Z,1516731406.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:46.241Z,1516731406.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:46.592Z,1516731406.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:46.630Z,1516731406.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:49.929Z,1516731409.929 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:49.944Z,1516731409.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:50.052Z,1516731410.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:50.093Z,1516731410.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:50.407Z,1516731410.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:50.430Z,1516731410.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:50.803Z,1516731410.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:50.824Z,1516731410.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:51.182Z,1516731411.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:51.262Z,1516731411.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:51.608Z,1516731411.608 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:51.636Z,1516731411.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:51.986Z,1516731411.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:52.032Z,1516731412.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:52.397Z,1516731412.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:52.441Z,1516731412.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:52.805Z,1516731412.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:52.837Z,1516731412.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:53.206Z,1516731413.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:53.268Z,1516731413.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:53.587Z,1516731413.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:53.618Z,1516731413.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:53.990Z,1516731413.990 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:54.025Z,1516731414.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:54.410Z,1516731414.410 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:54.437Z,1516731414.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:54.824Z,1516731414.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:54.849Z,1516731414.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:55.205Z,1516731415.205 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:55.241Z,1516731415.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:55.592Z,1516731415.592 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:55.641Z,1516731415.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:55.992Z,1516731415.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:56.031Z,1516731416.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:56.402Z,1516731416.402 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:56.421Z,1516731416.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:56.804Z,1516731416.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:56.853Z,1516731416.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:57.204Z,1516731417.204 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:57.249Z,1516731417.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:57.590Z,1516731417.590 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:57.624Z,1516731417.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:57.987Z,1516731417.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:58.058Z,1516731418.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:58.386Z,1516731418.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:58.418Z,1516731418.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:58.820Z,1516731418.820 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:58.844Z,1516731418.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:58.844Z,1516731418.844 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 299 2018-01-23T18:16:58.844Z,1516731418.844 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:16:58.846Z,1516731418.846 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:16:58.846Z,1516731418.846 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 299 2018-01-23T18:16:58.846Z,1516731418.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:16:58.908Z,1516731418.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:16:58.908Z,1516731418.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:16:59.209Z,1516731419.209 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:59.328Z,1516731419.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:16:59.328Z,1516731419.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 299 2018-01-23T18:16:59.329Z,1516731419.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:16:59.329Z,1516731419.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 299 2018-01-23T18:16:59.605Z,1516731419.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:16:59.628Z,1516731419.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:16:59.629Z,1516731419.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:16:59.629Z,1516731419.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:16:59.629Z,1516731419.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:16:59.630Z,1516731419.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:16:59.630Z,1516731419.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:16:59.998Z,1516731419.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:00.017Z,1516731420.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:17:00.018Z,1516731420.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:00.386Z,1516731420.386 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:00.454Z,1516731420.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:17:00.455Z,1516731420.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:00.787Z,1516731420.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:00.823Z,1516731420.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:17:00.824Z,1516731420.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:01.190Z,1516731421.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:01.228Z,1516731421.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:17:01.229Z,1516731421.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:01.623Z,1516731421.623 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:01.649Z,1516731421.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:17:01.650Z,1516731421.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:02.024Z,1516731422.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:02.089Z,1516731422.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:17:02.090Z,1516731422.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:02.414Z,1516731422.414 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:02.459Z,1516731422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:17:02.460Z,1516731422.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:02.798Z,1516731422.798 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:02.848Z,1516731422.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:17:02.849Z,1516731422.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:03.192Z,1516731423.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:03.207Z,1516731423.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:17:03.208Z,1516731423.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:03.588Z,1516731423.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:03.616Z,1516731423.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:17:03.617Z,1516731423.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:03.998Z,1516731423.998 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:04.012Z,1516731424.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:17:04.013Z,1516731424.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:04.392Z,1516731424.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:04.407Z,1516731424.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:17:04.408Z,1516731424.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:04.800Z,1516731424.800 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:04.828Z,1516731424.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:17:04.829Z,1516731424.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:05.207Z,1516731425.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:05.228Z,1516731425.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:17:05.229Z,1516731425.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:05.607Z,1516731425.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:05.621Z,1516731425.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:17:05.622Z,1516731425.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:05.984Z,1516731425.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:06.016Z,1516731426.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:17:06.017Z,1516731426.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:06.385Z,1516731426.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:06.418Z,1516731426.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:17:06.419Z,1516731426.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:06.785Z,1516731426.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:06.811Z,1516731426.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:17:06.812Z,1516731426.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:07.184Z,1516731427.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:07.216Z,1516731427.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:17:07.217Z,1516731427.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:07.600Z,1516731427.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:07.622Z,1516731427.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:17:07.623Z,1516731427.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:08.002Z,1516731428.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:08.017Z,1516731428.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:17:08.018Z,1516731428.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:08.400Z,1516731428.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:08.422Z,1516731428.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:17:08.427Z,1516731428.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:08.785Z,1516731428.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:08.818Z,1516731428.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:17:08.819Z,1516731428.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:09.182Z,1516731429.182 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:09.209Z,1516731429.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:17:09.210Z,1516731429.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:09.584Z,1516731429.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:09.616Z,1516731429.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:17:09.617Z,1516731429.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:09.985Z,1516731429.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:10.020Z,1516731430.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:17:10.021Z,1516731430.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:10.384Z,1516731430.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:10.416Z,1516731430.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:17:10.417Z,1516731430.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:10.799Z,1516731430.799 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:10.821Z,1516731430.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:17:10.822Z,1516731430.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:11.206Z,1516731431.206 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:11.229Z,1516731431.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:17:11.230Z,1516731431.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:11.603Z,1516731431.603 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:11.618Z,1516731431.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:17:11.619Z,1516731431.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:11.984Z,1516731431.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:12.020Z,1516731432.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:17:12.021Z,1516731432.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:12.389Z,1516731432.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:12.420Z,1516731432.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:17:12.421Z,1516731432.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:12.793Z,1516731432.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:12.819Z,1516731432.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:17:12.820Z,1516731432.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:13.183Z,1516731433.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:13.220Z,1516731433.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:17:13.221Z,1516731433.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:13.595Z,1516731433.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:13.632Z,1516731433.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:17:13.633Z,1516731433.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:13.995Z,1516731433.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:14.028Z,1516731434.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:17:14.029Z,1516731434.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:14.407Z,1516731434.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:14.422Z,1516731434.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:17:14.423Z,1516731434.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:14.785Z,1516731434.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:14.822Z,1516731434.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:17:14.823Z,1516731434.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:15.184Z,1516731435.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:15.211Z,1516731435.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:17:15.212Z,1516731435.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:15.584Z,1516731435.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:15.621Z,1516731435.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:17:15.621Z,1516731435.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:15.989Z,1516731435.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:16.004Z,1516731436.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:17:16.005Z,1516731436.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:16.396Z,1516731436.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:16.430Z,1516731436.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:17:16.431Z,1516731436.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:16.807Z,1516731436.807 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:16.836Z,1516731436.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:17:16.837Z,1516731436.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:17.219Z,1516731437.219 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:17.234Z,1516731437.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:17:17.235Z,1516731437.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:17.607Z,1516731437.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:17.636Z,1516731437.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:17:17.637Z,1516731437.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:17.996Z,1516731437.996 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:18.010Z,1516731438.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:17:18.023Z,1516731438.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:18.397Z,1516731438.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:18.432Z,1516731438.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:17:18.433Z,1516731438.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:18.792Z,1516731438.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:18.807Z,1516731438.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:17:18.808Z,1516731438.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:19.190Z,1516731439.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:19.209Z,1516731439.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:19.596Z,1516731439.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:19.612Z,1516731439.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:20.000Z,1516731440.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:20.021Z,1516731440.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:20.400Z,1516731440.400 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:20.415Z,1516731440.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:20.794Z,1516731440.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:20.810Z,1516731440.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:21.193Z,1516731441.193 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:21.217Z,1516731441.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:21.594Z,1516731441.594 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:21.610Z,1516731441.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:21.992Z,1516731441.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:22.025Z,1516731442.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:22.401Z,1516731442.401 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:22.417Z,1516731442.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:22.805Z,1516731442.805 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:22.821Z,1516731442.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:23.207Z,1516731443.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:23.223Z,1516731443.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:23.604Z,1516731443.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:23.620Z,1516731443.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:24.003Z,1516731444.003 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:24.018Z,1516731444.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:24.395Z,1516731444.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:24.410Z,1516731444.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:24.792Z,1516731444.792 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:24.820Z,1516731444.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:25.184Z,1516731445.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:25.222Z,1516731445.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:25.605Z,1516731445.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:25.620Z,1516731445.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:26.006Z,1516731446.006 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:26.022Z,1516731446.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:26.403Z,1516731446.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:26.419Z,1516731446.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:26.784Z,1516731446.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:26.812Z,1516731446.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:27.185Z,1516731447.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:27.217Z,1516731447.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:27.596Z,1516731447.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:27.615Z,1516731447.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:27.985Z,1516731447.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:28.018Z,1516731448.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:28.384Z,1516731448.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:28.421Z,1516731448.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:28.808Z,1516731448.808 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:28.823Z,1516731448.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:29.208Z,1516731449.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:29.228Z,1516731449.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:29.604Z,1516731449.604 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:29.619Z,1516731449.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:29.989Z,1516731449.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:30.021Z,1516731450.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:30.385Z,1516731450.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:30.418Z,1516731450.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:30.786Z,1516731450.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:30.813Z,1516731450.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:31.184Z,1516731451.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:31.221Z,1516731451.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:31.600Z,1516731451.600 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:31.624Z,1516731451.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:32.002Z,1516731452.002 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:32.029Z,1516731452.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:32.408Z,1516731452.408 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:32.424Z,1516731452.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:32.784Z,1516731452.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:32.823Z,1516731452.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:33.185Z,1516731453.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:33.221Z,1516731453.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:33.585Z,1516731453.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:33.621Z,1516731453.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:33.985Z,1516731453.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:34.022Z,1516731454.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:34.384Z,1516731454.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:34.420Z,1516731454.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:34.795Z,1516731454.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:34.829Z,1516731454.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:35.207Z,1516731455.207 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:35.233Z,1516731455.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:35.607Z,1516731455.607 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:35.622Z,1516731455.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:35.984Z,1516731455.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:36.033Z,1516731456.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:36.384Z,1516731456.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:36.422Z,1516731456.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:36.789Z,1516731456.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:36.821Z,1516731456.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:37.188Z,1516731457.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:37.221Z,1516731457.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:37.595Z,1516731457.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:37.635Z,1516731457.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:38.007Z,1516731458.007 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:38.023Z,1516731458.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:38.395Z,1516731458.395 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:38.429Z,1516731458.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:38.784Z,1516731458.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:38.822Z,1516731458.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:39.184Z,1516731459.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:39.220Z,1516731459.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:39.584Z,1516731459.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:39.620Z,1516731459.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:39.985Z,1516731459.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:40.022Z,1516731460.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:40.388Z,1516731460.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:40.421Z,1516731460.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:40.795Z,1516731460.795 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:40.830Z,1516731460.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:41.208Z,1516731461.208 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:41.223Z,1516731461.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:41.595Z,1516731461.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:41.630Z,1516731461.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:41.984Z,1516731461.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:42.021Z,1516731462.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:42.384Z,1516731462.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:42.422Z,1516731462.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:42.789Z,1516731462.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:42.820Z,1516731462.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:43.192Z,1516731463.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:43.218Z,1516731463.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:43.595Z,1516731463.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:43.630Z,1516731463.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:44.012Z,1516731464.012 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:44.027Z,1516731464.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:44.396Z,1516731464.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:44.421Z,1516731464.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:44.784Z,1516731464.784 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:44.828Z,1516731464.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:45.188Z,1516731465.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:45.224Z,1516731465.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:45.584Z,1516731465.584 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:45.625Z,1516731465.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:45.985Z,1516731465.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:45.000Z,1516731466.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:46.390Z,1516731466.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:46.405Z,1516731466.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:46.803Z,1516731466.803 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:46.834Z,1516731466.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:49.912Z,1516731469.912 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:49.937Z,1516731469.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:50.044Z,1516731470.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:50.083Z,1516731470.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:50.388Z,1516731470.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:50.409Z,1516731470.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:50.794Z,1516731470.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:50.809Z,1516731470.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:51.192Z,1516731471.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:51.208Z,1516731471.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:51.593Z,1516731471.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:51.613Z,1516731471.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:51.995Z,1516731471.995 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:52.010Z,1516731472.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:52.407Z,1516731472.407 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:52.438Z,1516731472.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:52.793Z,1516731472.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:52.809Z,1516731472.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:53.189Z,1516731473.189 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:53.204Z,1516731473.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:53.588Z,1516731473.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:53.607Z,1516731473.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:53.988Z,1516731473.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:54.007Z,1516731474.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:54.389Z,1516731474.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:54.404Z,1516731474.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:54.794Z,1516731474.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:54.817Z,1516731474.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:55.195Z,1516731475.195 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:55.210Z,1516731475.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:55.595Z,1516731475.595 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:55.610Z,1516731475.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:55.993Z,1516731475.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:56.008Z,1516731476.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:56.385Z,1516731476.385 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:56.412Z,1516731476.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:56.794Z,1516731476.794 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:56.809Z,1516731476.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:57.188Z,1516731477.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:57.208Z,1516731477.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:57.598Z,1516731477.598 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:57.613Z,1516731477.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:57.000Z,1516731478.000 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:58.020Z,1516731478.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:58.399Z,1516731478.399 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:58.414Z,1516731478.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:58.789Z,1516731478.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:58.804Z,1516731478.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:59.190Z,1516731479.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:59.206Z,1516731479.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:59.593Z,1516731479.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:17:59.617Z,1516731479.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:17:59.988Z,1516731479.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:00.009Z,1516731480.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:00.391Z,1516731480.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:00.407Z,1516731480.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:00.796Z,1516731480.796 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:00.824Z,1516731480.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:01.202Z,1516731481.202 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:01.225Z,1516731481.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:01.605Z,1516731481.605 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:01.620Z,1516731481.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:01.978Z,1516731481.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:02.006Z,1516731482.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:02.397Z,1516731482.397 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:02.412Z,1516731482.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:02.804Z,1516731482.804 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:02.819Z,1516731482.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:03.178Z,1516731483.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:03.210Z,1516731483.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:03.564Z,1516731483.564 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T18:18:03.564Z,1516731483.564 [NAL9602] Data Fault, FailCount= 2 2018-01-23T18:18:03.564Z,1516731483.564 [NAL9602](ERROR): Data Fault 2018-01-23T18:18:03.581Z,1516731483.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:03.624Z,1516731483.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:03.647Z,1516731483.647 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T18:18:03.964Z,1516731483.964 [NAL9602](INFO): Powering down 2018-01-23T18:18:03.981Z,1516731483.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:04.016Z,1516731484.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:04.380Z,1516731484.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:04.421Z,1516731484.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:04.780Z,1516731484.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:04.801Z,1516731484.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:04.842Z,1516731484.842 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T18:18:04.842Z,1516731484.842 [NAL9602] No Fault, FailCount= 2 2018-01-23T18:18:05.188Z,1516731485.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:05.203Z,1516731485.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:05.588Z,1516731485.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:05.603Z,1516731485.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:05.985Z,1516731485.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:06.008Z,1516731486.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:06.389Z,1516731486.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:06.404Z,1516731486.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:06.786Z,1516731486.786 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:06.801Z,1516731486.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:07.188Z,1516731487.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:07.203Z,1516731487.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:07.588Z,1516731487.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:07.602Z,1516731487.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:07.988Z,1516731487.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:08.003Z,1516731488.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:08.384Z,1516731488.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:08.412Z,1516731488.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:08.789Z,1516731488.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:08.804Z,1516731488.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:09.186Z,1516731489.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:09.201Z,1516731489.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:09.582Z,1516731489.582 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:09.617Z,1516731489.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:09.991Z,1516731489.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:10.006Z,1516731490.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:10.388Z,1516731490.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:10.404Z,1516731490.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:10.788Z,1516731490.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:10.803Z,1516731490.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:11.188Z,1516731491.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:11.202Z,1516731491.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:11.588Z,1516731491.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:11.603Z,1516731491.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:11.993Z,1516731491.993 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:12.008Z,1516731492.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:12.393Z,1516731492.393 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:12.407Z,1516731492.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:12.787Z,1516731492.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:12.803Z,1516731492.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:13.188Z,1516731493.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:13.203Z,1516731493.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:13.588Z,1516731493.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:13.603Z,1516731493.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:13.985Z,1516731493.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:14.000Z,1516731494.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:14.384Z,1516731494.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:14.413Z,1516731494.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:14.788Z,1516731494.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:14.803Z,1516731494.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:15.185Z,1516731495.185 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:15.200Z,1516731495.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:15.583Z,1516731495.583 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:15.613Z,1516731495.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:15.988Z,1516731495.988 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:16.002Z,1516731496.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:16.388Z,1516731496.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:16.403Z,1516731496.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:16.782Z,1516731496.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:16.815Z,1516731496.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:17.188Z,1516731497.188 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:17.203Z,1516731497.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:17.588Z,1516731497.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:17.603Z,1516731497.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:17.982Z,1516731497.982 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:18.015Z,1516731498.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:18.388Z,1516731498.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:18.403Z,1516731498.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:18.785Z,1516731498.785 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:18.800Z,1516731498.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:19.183Z,1516731499.183 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:19.205Z,1516731499.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:19.587Z,1516731499.587 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:19.602Z,1516731499.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:19.985Z,1516731499.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:20.000Z,1516731500.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:20.387Z,1516731500.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:20.402Z,1516731500.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:20.788Z,1516731500.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:20.803Z,1516731500.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:21.177Z,1516731501.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:21.201Z,1516731501.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:21.596Z,1516731501.596 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:21.611Z,1516731501.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:21.980Z,1516731501.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:22.015Z,1516731502.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:22.396Z,1516731502.396 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:22.411Z,1516731502.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:22.780Z,1516731502.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:22.813Z,1516731502.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:23.180Z,1516731503.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:23.206Z,1516731503.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:23.580Z,1516731503.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:23.613Z,1516731503.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:23.980Z,1516731503.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:24.013Z,1516731504.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:24.380Z,1516731504.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:24.415Z,1516731504.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:24.777Z,1516731504.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:24.813Z,1516731504.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:25.184Z,1516731505.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:25.210Z,1516731505.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:25.580Z,1516731505.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:25.612Z,1516731505.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:25.977Z,1516731505.977 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:26.005Z,1516731506.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:26.384Z,1516731506.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:26.410Z,1516731506.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:26.780Z,1516731506.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:26.813Z,1516731506.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:27.177Z,1516731507.177 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:27.201Z,1516731507.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:27.580Z,1516731507.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:27.617Z,1516731507.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:27.980Z,1516731507.980 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:28.017Z,1516731508.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:28.380Z,1516731508.380 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:28.407Z,1516731508.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:28.780Z,1516731508.780 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:28.817Z,1516731508.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:29.180Z,1516731509.180 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:29.195Z,1516731509.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:29.581Z,1516731509.581 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:29.597Z,1516731509.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:29.992Z,1516731509.992 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:30.023Z,1516731510.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:30.384Z,1516731510.384 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:30.399Z,1516731510.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:30.781Z,1516731510.781 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:30.796Z,1516731510.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:31.192Z,1516731511.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:31.229Z,1516731511.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:31.585Z,1516731511.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:31.600Z,1516731511.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:31.984Z,1516731511.984 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:32.003Z,1516731512.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:32.389Z,1516731512.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:32.405Z,1516731512.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:32.787Z,1516731512.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:32.802Z,1516731512.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:33.184Z,1516731513.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:33.200Z,1516731513.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:33.585Z,1516731513.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:33.600Z,1516731513.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:33.987Z,1516731513.987 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:34.002Z,1516731514.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:34.364Z,1516731514.364 [NAL9602](INFO): Powering up NAL9602 2018-01-23T18:18:34.391Z,1516731514.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:34.417Z,1516731514.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:34.793Z,1516731514.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:34.813Z,1516731514.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:35.191Z,1516731515.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:35.206Z,1516731515.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:35.591Z,1516731515.591 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:35.607Z,1516731515.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:35.985Z,1516731515.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:36.012Z,1516731516.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:36.392Z,1516731516.392 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:36.406Z,1516731516.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:36.790Z,1516731516.790 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:36.806Z,1516731516.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:37.190Z,1516731517.190 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:37.205Z,1516731517.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:37.588Z,1516731517.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:37.603Z,1516731517.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:37.991Z,1516731517.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:38.006Z,1516731518.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:38.388Z,1516731518.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:38.404Z,1516731518.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:38.788Z,1516731518.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:38.804Z,1516731518.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:39.186Z,1516731519.186 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:39.202Z,1516731519.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:39.593Z,1516731519.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:39.609Z,1516731519.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:39.989Z,1516731519.989 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:40.004Z,1516731520.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:40.390Z,1516731520.390 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:40.405Z,1516731520.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:40.789Z,1516731520.789 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:40.804Z,1516731520.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:41.192Z,1516731521.192 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:41.212Z,1516731521.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:41.593Z,1516731521.593 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:41.608Z,1516731521.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:41.985Z,1516731521.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:42.016Z,1516731522.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:42.388Z,1516731522.388 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:42.403Z,1516731522.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:42.791Z,1516731522.791 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:42.807Z,1516731522.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:43.191Z,1516731523.191 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:43.207Z,1516731523.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:43.588Z,1516731523.588 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:43.604Z,1516731523.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:43.985Z,1516731523.985 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:44.001Z,1516731524.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:44.391Z,1516731524.391 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:44.405Z,1516731524.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:44.793Z,1516731524.793 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:44.808Z,1516731524.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:45.194Z,1516731525.194 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:45.209Z,1516731525.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:45.212Z,1516731525.212 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:13:45.0Z 2018-01-23T18:18:45.212Z,1516731525.212 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:18:45.213Z,1516731525.213 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:18:45.565Z,1516731525.565 [NAL9602](INFO): NAL9602 initialized 2018-01-23T18:18:45.585Z,1516731525.585 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:45.616Z,1516731525.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:46.120Z,1516731526.120 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:46.153Z,1516731526.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:46.403Z,1516731526.403 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:46.425Z,1516731526.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:49.560Z,1516731529.560 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:49.578Z,1516731529.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:49.657Z,1516731529.657 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0352.lzma 2018-01-23T18:18:49.701Z,1516731529.701 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:49.743Z,1516731529.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:50.056Z,1516731530.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:50.071Z,1516731530.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:50.430Z,1516731530.430 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0352.lzma.bak 2018-01-23T18:18:50.430Z,1516731530.430 [DataOverHttps](INFO): SBD MOMSN=7756413 2018-01-23T18:18:50.471Z,1516731530.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:50.507Z,1516731530.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:51.106Z,1516731531.106 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:51.121Z,1516731531.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:51.260Z,1516731531.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:51.274Z,1516731531.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:54.368Z,1516731534.368 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:54.386Z,1516731534.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:54.505Z,1516731534.505 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:54.547Z,1516731534.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:54.858Z,1516731534.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:54.881Z,1516731534.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:55.266Z,1516731535.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:55.281Z,1516731535.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:55.662Z,1516731535.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:55.678Z,1516731535.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:56.067Z,1516731536.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:56.082Z,1516731536.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:59.164Z,1516731539.164 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:59.187Z,1516731539.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:59.263Z,1516731539.263 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0353.lzma 2018-01-23T18:18:59.301Z,1516731539.301 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:59.332Z,1516731539.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:18:59.669Z,1516731539.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:18:59.684Z,1516731539.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:00.038Z,1516731540.038 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0353.lzma.bak 2018-01-23T18:19:00.038Z,1516731540.038 [DataOverHttps](INFO): SBD MOMSN=7756415 2018-01-23T18:19:00.081Z,1516731540.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:00.096Z,1516731540.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:00.716Z,1516731540.716 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:00.731Z,1516731540.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:00.734Z,1516731540.734 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T18:19:00.734Z,1516731540.734 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T18:19:00.734Z,1516731540.734 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T18:19:00.858Z,1516731540.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:00.891Z,1516731540.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:03.972Z,1516731543.972 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:03.995Z,1516731543.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:04.107Z,1516731544.107 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:04.130Z,1516731544.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:04.484Z,1516731544.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:04.499Z,1516731544.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:04.881Z,1516731544.881 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:04.896Z,1516731544.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:05.280Z,1516731545.280 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:05.301Z,1516731545.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:05.676Z,1516731545.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:05.691Z,1516731545.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:06.083Z,1516731546.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:06.098Z,1516731546.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:06.487Z,1516731546.487 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:06.502Z,1516731546.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:06.884Z,1516731546.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:06.899Z,1516731546.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:07.278Z,1516731547.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:07.293Z,1516731547.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:07.676Z,1516731547.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:07.691Z,1516731547.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:08.080Z,1516731548.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:08.107Z,1516731548.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:08.483Z,1516731548.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:08.498Z,1516731548.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:08.884Z,1516731548.884 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:08.899Z,1516731548.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:09.273Z,1516731549.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:09.295Z,1516731549.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:09.677Z,1516731549.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:09.692Z,1516731549.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:10.084Z,1516731550.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:10.099Z,1516731550.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:10.483Z,1516731550.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:10.498Z,1516731550.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:10.882Z,1516731550.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:10.897Z,1516731550.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:11.276Z,1516731551.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:11.295Z,1516731551.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:11.672Z,1516731551.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:11.696Z,1516731551.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:12.087Z,1516731552.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:12.102Z,1516731552.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:12.486Z,1516731552.486 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:12.505Z,1516731552.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:12.886Z,1516731552.886 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:12.905Z,1516731552.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:13.278Z,1516731553.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:13.293Z,1516731553.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:13.676Z,1516731553.676 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:13.694Z,1516731553.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:14.082Z,1516731554.082 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:14.109Z,1516731554.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:14.490Z,1516731554.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:14.505Z,1516731554.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:14.890Z,1516731554.890 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:14.905Z,1516731554.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:15.276Z,1516731555.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:15.296Z,1516731555.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:15.677Z,1516731555.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:15.696Z,1516731555.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:16.090Z,1516731556.090 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:16.105Z,1516731556.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:16.490Z,1516731556.490 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:16.505Z,1516731556.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:16.879Z,1516731556.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:16.915Z,1516731556.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:17.273Z,1516731557.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:17.305Z,1516731557.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:17.674Z,1516731557.674 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:17.701Z,1516731557.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:18.083Z,1516731558.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:18.111Z,1516731558.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:18.483Z,1516731558.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:18.509Z,1516731558.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:18.879Z,1516731558.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:18.905Z,1516731558.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:19.269Z,1516731559.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:19.324Z,1516731559.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:19.670Z,1516731559.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:19.686Z,1516731559.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:20.083Z,1516731560.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:20.109Z,1516731560.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:20.483Z,1516731560.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:20.518Z,1516731560.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:20.879Z,1516731560.879 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:20.910Z,1516731560.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:21.275Z,1516731561.275 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:21.290Z,1516731561.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:21.673Z,1516731561.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:21.688Z,1516731561.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:22.087Z,1516731562.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:22.120Z,1516731562.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:22.491Z,1516731562.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:22.514Z,1516731562.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:22.891Z,1516731562.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:22.915Z,1516731562.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:23.278Z,1516731563.278 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:23.293Z,1516731563.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:23.680Z,1516731563.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:23.701Z,1516731563.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:24.081Z,1516731564.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:24.096Z,1516731564.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:24.483Z,1516731564.483 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:24.498Z,1516731564.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:24.880Z,1516731564.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:24.901Z,1516731564.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:25.282Z,1516731565.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:25.297Z,1516731565.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:25.682Z,1516731565.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:25.697Z,1516731565.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:26.083Z,1516731566.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:26.098Z,1516731566.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:26.485Z,1516731566.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:26.504Z,1516731566.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:26.882Z,1516731566.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:26.905Z,1516731566.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:27.276Z,1516731567.276 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:27.303Z,1516731567.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:27.669Z,1516731567.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:27.708Z,1516731567.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:28.084Z,1516731568.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:28.111Z,1516731568.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:28.492Z,1516731568.492 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:28.509Z,1516731568.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:28.882Z,1516731568.882 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:28.918Z,1516731568.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:29.266Z,1516731569.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:29.298Z,1516731569.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:29.670Z,1516731569.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:29.705Z,1516731569.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:30.068Z,1516731570.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:30.111Z,1516731570.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:30.480Z,1516731570.480 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:30.516Z,1516731570.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:30.899Z,1516731570.899 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:30.914Z,1516731570.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:31.279Z,1516731571.279 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:31.316Z,1516731571.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:31.673Z,1516731571.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:31.705Z,1516731571.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:32.069Z,1516731572.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:32.105Z,1516731572.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:32.473Z,1516731572.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:32.508Z,1516731572.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:32.866Z,1516731572.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:32.882Z,1516731572.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:33.296Z,1516731573.296 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:33.311Z,1516731573.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:33.683Z,1516731573.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:33.718Z,1516731573.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:34.083Z,1516731574.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:34.110Z,1516731574.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:34.469Z,1516731574.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:34.505Z,1516731574.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:34.877Z,1516731574.877 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:34.916Z,1516731574.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:35.269Z,1516731575.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:35.285Z,1516731575.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:35.682Z,1516731575.682 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:35.715Z,1516731575.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:36.073Z,1516731576.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:36.118Z,1516731576.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:36.488Z,1516731576.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:36.511Z,1516731576.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:36.902Z,1516731576.902 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:36.917Z,1516731576.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:37.292Z,1516731577.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:37.324Z,1516731577.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:37.681Z,1516731577.681 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:37.716Z,1516731577.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:38.081Z,1516731578.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:38.112Z,1516731578.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:38.477Z,1516731578.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:38.492Z,1516731578.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:38.875Z,1516731578.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:38.890Z,1516731578.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:39.291Z,1516731579.291 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:39.325Z,1516731579.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:39.691Z,1516731579.691 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:39.725Z,1516731579.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:40.080Z,1516731580.080 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:40.094Z,1516731580.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:40.478Z,1516731580.478 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:40.493Z,1516731580.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:40.880Z,1516731580.880 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:40.895Z,1516731580.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:41.272Z,1516731581.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:41.299Z,1516731581.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:41.680Z,1516731581.680 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:41.701Z,1516731581.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:42.081Z,1516731582.081 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:42.095Z,1516731582.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:42.484Z,1516731582.484 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:42.499Z,1516731582.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:42.883Z,1516731582.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:42.898Z,1516731582.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:43.282Z,1516731583.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:43.304Z,1516731583.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:43.683Z,1516731583.683 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:43.698Z,1516731583.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:44.084Z,1516731584.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:44.105Z,1516731584.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:44.485Z,1516731584.485 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:44.500Z,1516731584.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:44.875Z,1516731584.875 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:44.890Z,1516731584.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:45.282Z,1516731585.282 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:45.301Z,1516731585.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:45.692Z,1516731585.692 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:45.707Z,1516731585.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:45.709Z,1516731585.709 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:45.709Z,1516731585.709 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 300 2018-01-23T18:19:45.709Z,1516731585.709 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:19:45.721Z,1516731585.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:19:46.088Z,1516731586.088 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:46.109Z,1516731586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:46.122Z,1516731586.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:19:46.122Z,1516731586.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 300 2018-01-23T18:19:46.468Z,1516731586.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:46.499Z,1516731586.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:46.501Z,1516731586.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:19:46.501Z,1516731586.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:19:46.501Z,1516731586.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:19:46.870Z,1516731586.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:46.886Z,1516731586.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:47.269Z,1516731587.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:47.289Z,1516731587.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:47.739Z,1516731587.739 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:47.766Z,1516731587.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:48.073Z,1516731588.073 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:48.092Z,1516731588.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:48.488Z,1516731588.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:48.519Z,1516731588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:48.895Z,1516731588.895 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:48.925Z,1516731588.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:49.295Z,1516731589.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:49.328Z,1516731589.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:49.673Z,1516731589.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:49.693Z,1516731589.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:50.076Z,1516731590.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:50.101Z,1516731590.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:50.482Z,1516731590.482 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:50.496Z,1516731590.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:50.876Z,1516731590.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:50.892Z,1516731590.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:51.292Z,1516731591.292 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:51.323Z,1516731591.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:51.688Z,1516731591.688 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:51.703Z,1516731591.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:52.084Z,1516731592.084 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:52.101Z,1516731592.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:52.474Z,1516731592.474 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:52.494Z,1516731592.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:52.885Z,1516731592.885 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:52.900Z,1516731592.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:53.274Z,1516731593.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:53.303Z,1516731593.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:53.677Z,1516731593.677 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:53.700Z,1516731593.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:54.083Z,1516731594.083 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:54.098Z,1516731594.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:54.491Z,1516731594.491 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:54.506Z,1516731594.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:54.891Z,1516731594.891 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:54.912Z,1516731594.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:55.289Z,1516731595.289 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:55.305Z,1516731595.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:55.679Z,1516731595.679 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:55.697Z,1516731595.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:56.087Z,1516731596.087 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:56.102Z,1516731596.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:56.469Z,1516731596.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:56.501Z,1516731596.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:56.867Z,1516731596.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:56.884Z,1516731596.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x15595 got:0x47417 2018-01-23T18:19:56.901Z,1516731596.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:57.284Z,1516731597.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:57.316Z,1516731597.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:57.694Z,1516731597.694 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:57.709Z,1516731597.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:58.086Z,1516731598.086 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:58.113Z,1516731598.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:58.469Z,1516731598.469 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:58.498Z,1516731598.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:58.871Z,1516731598.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:58.905Z,1516731598.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:59.269Z,1516731599.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:59.296Z,1516731599.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:59.673Z,1516731599.673 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:19:59.703Z,1516731599.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:59.703Z,1516731599.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 300 2018-01-23T18:19:59.703Z,1516731599.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:19:59.705Z,1516731599.705 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:19:59.705Z,1516731599.705 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 300 2018-01-23T18:19:59.705Z,1516731599.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:19:59.718Z,1516731599.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:19:59.718Z,1516731599.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:20:00.068Z,1516731600.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:00.116Z,1516731600.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:20:00.116Z,1516731600.116 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 300 2018-01-23T18:20:00.117Z,1516731600.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:20:00.117Z,1516731600.117 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 300 2018-01-23T18:20:00.481Z,1516731600.481 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:00.497Z,1516731600.497 [PNI_TCM](ERROR): CRC does not match. Expected:0x31796 got:0x202 2018-01-23T18:20:00.524Z,1516731600.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:20:00.524Z,1516731600.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:20:00.524Z,1516731600.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:20:00.525Z,1516731600.525 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:20:00.525Z,1516731600.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:20:00.525Z,1516731600.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:20:00.883Z,1516731600.883 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:00.909Z,1516731600.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:20:00.910Z,1516731600.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:01.284Z,1516731601.284 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:01.323Z,1516731601.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:20:01.324Z,1516731601.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:04.355Z,1516731604.355 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:04.384Z,1516731604.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T18:20:04.385Z,1516731604.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:04.488Z,1516731604.488 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:04.505Z,1516731604.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:20:04.506Z,1516731604.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:04.852Z,1516731604.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:04.893Z,1516731604.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:20:04.894Z,1516731604.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:05.256Z,1516731605.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:05.284Z,1516731605.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:20:05.285Z,1516731605.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:05.640Z,1516731605.640 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:05.655Z,1516731605.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:20:05.656Z,1516731605.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:06.034Z,1516731606.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:06.057Z,1516731606.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:20:06.058Z,1516731606.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:06.437Z,1516731606.437 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:06.452Z,1516731606.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s. 2018-01-23T18:20:06.452Z,1516731606.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:06.837Z,1516731606.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:06.851Z,1516731606.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s. 2018-01-23T18:20:06.852Z,1516731606.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:07.239Z,1516731607.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:07.254Z,1516731607.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:20:07.255Z,1516731607.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:07.642Z,1516731607.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:07.664Z,1516731607.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:20:07.665Z,1516731607.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:08.042Z,1516731608.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:08.057Z,1516731608.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:20:08.058Z,1516731608.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:08.442Z,1516731608.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:08.456Z,1516731608.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:20:08.457Z,1516731608.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:08.838Z,1516731608.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:08.852Z,1516731608.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s. 2018-01-23T18:20:08.853Z,1516731608.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:09.233Z,1516731609.233 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:09.260Z,1516731609.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:20:09.261Z,1516731609.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:09.636Z,1516731609.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:09.656Z,1516731609.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:20:09.657Z,1516731609.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:10.037Z,1516731610.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:10.051Z,1516731610.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s. 2018-01-23T18:20:10.052Z,1516731610.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:10.448Z,1516731610.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:10.462Z,1516731610.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:20:10.463Z,1516731610.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:10.851Z,1516731610.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:10.866Z,1516731610.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:20:10.867Z,1516731610.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:11.248Z,1516731611.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:11.268Z,1516731611.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:20:11.269Z,1516731611.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:11.626Z,1516731611.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:11.658Z,1516731611.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:20:11.663Z,1516731611.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:12.032Z,1516731612.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:12.059Z,1516731612.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:20:12.060Z,1516731612.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:12.429Z,1516731612.429 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:12.466Z,1516731612.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:20:12.467Z,1516731612.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:12.826Z,1516731612.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:12.853Z,1516731612.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:20:12.854Z,1516731612.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:13.239Z,1516731613.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:13.274Z,1516731613.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:20:13.275Z,1516731613.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:13.652Z,1516731613.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:13.667Z,1516731613.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:20:13.668Z,1516731613.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:14.039Z,1516731614.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:14.073Z,1516731614.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:20:14.074Z,1516731614.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:14.428Z,1516731614.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:14.464Z,1516731614.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:20:14.465Z,1516731614.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:14.828Z,1516731614.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:14.865Z,1516731614.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:20:14.866Z,1516731614.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:15.226Z,1516731615.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:15.241Z,1516731615.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T18:20:15.242Z,1516731615.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:15.629Z,1516731615.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:15.644Z,1516731615.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T18:20:15.645Z,1516731615.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:16.027Z,1516731616.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:16.048Z,1516731616.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T18:20:16.049Z,1516731616.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:16.443Z,1516731616.443 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:16.469Z,1516731616.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:20:16.470Z,1516731616.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:16.843Z,1516731616.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:16.868Z,1516731616.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:20:16.869Z,1516731616.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:17.239Z,1516731617.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:17.273Z,1516731617.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:20:17.274Z,1516731617.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:17.626Z,1516731617.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:17.641Z,1516731617.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T18:20:17.642Z,1516731617.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:18.040Z,1516731618.040 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:18.076Z,1516731618.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:20:18.077Z,1516731618.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:18.433Z,1516731618.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:18.447Z,1516731618.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s. 2018-01-23T18:20:18.448Z,1516731618.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:18.833Z,1516731618.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:18.852Z,1516731618.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T18:20:18.853Z,1516731618.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:19.243Z,1516731619.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:19.258Z,1516731619.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:20:19.259Z,1516731619.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:19.643Z,1516731619.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:19.664Z,1516731619.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:20:19.665Z,1516731619.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:20.039Z,1516731620.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:20.054Z,1516731620.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:20.435Z,1516731620.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:20.450Z,1516731620.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:20.836Z,1516731620.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:20.856Z,1516731620.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:21.232Z,1516731621.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:21.259Z,1516731621.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:21.636Z,1516731621.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:21.655Z,1516731621.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:22.037Z,1516731622.037 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:22.052Z,1516731622.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:22.442Z,1516731622.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:22.465Z,1516731622.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:22.847Z,1516731622.847 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:22.862Z,1516731622.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:23.246Z,1516731623.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:23.261Z,1516731623.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:23.636Z,1516731623.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:23.651Z,1516731623.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:24.032Z,1516731624.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:24.059Z,1516731624.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:24.438Z,1516731624.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:24.452Z,1516731624.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:24.828Z,1516731624.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:24.861Z,1516731624.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:25.244Z,1516731625.244 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:25.271Z,1516731625.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:25.652Z,1516731625.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:25.667Z,1516731625.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:26.047Z,1516731626.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:26.062Z,1516731626.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:26.428Z,1516731626.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:26.461Z,1516731626.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:26.827Z,1516731626.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:26.866Z,1516731626.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:27.226Z,1516731627.226 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:27.249Z,1516731627.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:27.629Z,1516731627.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:27.661Z,1516731627.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:28.027Z,1516731628.027 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:28.042Z,1516731628.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:28.439Z,1516731628.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:28.475Z,1516731628.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:28.864Z,1516731628.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:28.878Z,1516731628.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:29.243Z,1516731629.243 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:29.279Z,1516731629.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:29.630Z,1516731629.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:29.673Z,1516731629.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:30.033Z,1516731630.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:30.048Z,1516731630.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:30.433Z,1516731630.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:30.448Z,1516731630.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:30.833Z,1516731630.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:30.848Z,1516731630.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:31.251Z,1516731631.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:31.275Z,1516731631.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:31.655Z,1516731631.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:31.681Z,1516731631.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:32.044Z,1516731632.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:32.075Z,1516731632.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:32.434Z,1516731632.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:32.453Z,1516731632.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:32.833Z,1516731632.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:32.860Z,1516731632.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:33.230Z,1516731633.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:33.258Z,1516731633.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:33.636Z,1516731633.636 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:33.651Z,1516731633.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:34.036Z,1516731634.036 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:34.051Z,1516731634.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:34.439Z,1516731634.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:34.455Z,1516731634.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:34.843Z,1516731634.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:34.858Z,1516731634.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:35.239Z,1516731635.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:35.260Z,1516731635.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:35.633Z,1516731635.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:35.666Z,1516731635.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:36.035Z,1516731636.035 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:36.050Z,1516731636.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:36.438Z,1516731636.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:36.453Z,1516731636.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:36.833Z,1516731636.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:36.860Z,1516731636.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:37.248Z,1516731637.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:37.263Z,1516731637.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:37.652Z,1516731637.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:37.672Z,1516731637.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:38.044Z,1516731638.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:38.067Z,1516731638.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:38.430Z,1516731638.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:38.465Z,1516731638.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:38.828Z,1516731638.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:38.863Z,1516731638.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:39.245Z,1516731639.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:39.264Z,1516731639.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:39.653Z,1516731639.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:39.668Z,1516731639.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:40.042Z,1516731640.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:40.076Z,1516731640.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:40.430Z,1516731640.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:40.469Z,1516731640.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:40.833Z,1516731640.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:40.869Z,1516731640.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:41.240Z,1516731641.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:41.286Z,1516731641.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:41.641Z,1516731641.641 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:41.676Z,1516731641.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:42.048Z,1516731642.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:42.077Z,1516731642.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:42.433Z,1516731642.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:42.453Z,1516731642.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:42.830Z,1516731642.830 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:42.846Z,1516731642.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:43.252Z,1516731643.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:43.277Z,1516731643.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:43.656Z,1516731643.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:43.682Z,1516731643.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:44.043Z,1516731644.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:44.075Z,1516731644.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:44.436Z,1516731644.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:44.457Z,1516731644.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:44.837Z,1516731644.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:44.852Z,1516731644.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:45.240Z,1516731645.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:45.255Z,1516731645.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:45.643Z,1516731645.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:45.658Z,1516731645.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:46.039Z,1516731646.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:46.060Z,1516731646.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:46.436Z,1516731646.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:46.455Z,1516731646.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:46.842Z,1516731646.842 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:46.857Z,1516731646.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:47.247Z,1516731647.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:47.262Z,1516731647.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:47.643Z,1516731647.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:47.658Z,1516731647.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:48.043Z,1516731648.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:48.058Z,1516731648.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:48.439Z,1516731648.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:48.453Z,1516731648.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:48.832Z,1516731648.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:48.853Z,1516731648.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:49.242Z,1516731649.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:49.257Z,1516731649.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:49.643Z,1516731649.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:49.658Z,1516731649.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:50.042Z,1516731650.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:50.057Z,1516731650.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:50.442Z,1516731650.442 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:50.458Z,1516731650.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:50.837Z,1516731650.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:50.852Z,1516731650.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:51.241Z,1516731651.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:51.261Z,1516731651.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:51.644Z,1516731651.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:51.659Z,1516731651.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:52.043Z,1516731652.043 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:52.058Z,1516731652.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:52.436Z,1516731652.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:52.455Z,1516731652.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:52.833Z,1516731652.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:52.854Z,1516731652.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:53.242Z,1516731653.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:53.257Z,1516731653.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:53.644Z,1516731653.644 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:53.659Z,1516731653.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:54.041Z,1516731654.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:54.061Z,1516731654.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:54.438Z,1516731654.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:54.453Z,1516731654.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:54.832Z,1516731654.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:54.852Z,1516731654.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:55.241Z,1516731655.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:55.261Z,1516731655.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:55.643Z,1516731655.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:55.658Z,1516731655.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:56.041Z,1516731656.041 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:56.061Z,1516731656.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:56.436Z,1516731656.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:56.454Z,1516731656.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:56.837Z,1516731656.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:56.852Z,1516731656.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:57.241Z,1516731657.241 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:57.261Z,1516731657.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:57.648Z,1516731657.648 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:57.662Z,1516731657.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:58.042Z,1516731658.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:58.057Z,1516731658.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:58.436Z,1516731658.436 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:58.455Z,1516731658.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:58.836Z,1516731658.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:58.851Z,1516731658.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:59.242Z,1516731659.242 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:59.264Z,1516731659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:20:59.647Z,1516731659.647 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:20:59.662Z,1516731659.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:00.048Z,1516731660.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:00.069Z,1516731660.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:00.438Z,1516731660.438 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:00.452Z,1516731660.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:00.826Z,1516731660.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:00.854Z,1516731660.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:01.251Z,1516731661.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:01.266Z,1516731661.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:01.653Z,1516731661.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:01.672Z,1516731661.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:04.751Z,1516731664.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:04.773Z,1516731664.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:04.873Z,1516731664.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:04.909Z,1516731664.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:05.252Z,1516731665.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:05.285Z,1516731665.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:05.665Z,1516731665.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:05.685Z,1516731665.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:06.059Z,1516731666.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:06.074Z,1516731666.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:06.467Z,1516731666.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:06.482Z,1516731666.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:06.862Z,1516731666.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:06.889Z,1516731666.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:07.267Z,1516731667.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:07.281Z,1516731667.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:07.658Z,1516731667.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:07.680Z,1516731667.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:08.046Z,1516731668.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:08.074Z,1516731668.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:08.461Z,1516731668.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:08.476Z,1516731668.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:08.849Z,1516731668.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:08.886Z,1516731668.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:09.264Z,1516731669.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:09.294Z,1516731669.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:09.671Z,1516731669.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:09.686Z,1516731669.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:10.064Z,1516731670.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:10.091Z,1516731670.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:10.453Z,1516731670.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:10.479Z,1516731670.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:10.864Z,1516731670.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:10.882Z,1516731670.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:11.268Z,1516731671.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:11.284Z,1516731671.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:11.670Z,1516731671.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:11.685Z,1516731671.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:12.064Z,1516731672.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:12.094Z,1516731672.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:12.450Z,1516731672.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:12.481Z,1516731672.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:12.846Z,1516731672.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:12.869Z,1516731672.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:13.259Z,1516731673.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:13.286Z,1516731673.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:13.671Z,1516731673.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:13.692Z,1516731673.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:14.059Z,1516731674.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:14.085Z,1516731674.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:14.449Z,1516731674.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:14.476Z,1516731674.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:14.852Z,1516731674.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:14.890Z,1516731674.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:15.259Z,1516731675.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:15.285Z,1516731675.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:15.663Z,1516731675.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:15.699Z,1516731675.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:16.059Z,1516731676.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:16.094Z,1516731676.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:16.449Z,1516731676.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:16.489Z,1516731676.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:16.848Z,1516731676.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:16.869Z,1516731676.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:17.267Z,1516731677.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:17.296Z,1516731677.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:17.667Z,1516731677.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:17.689Z,1516731677.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:18.071Z,1516731678.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:18.098Z,1516731678.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:18.462Z,1516731678.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:18.494Z,1516731678.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:18.855Z,1516731678.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:18.870Z,1516731678.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:19.264Z,1516731679.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:19.291Z,1516731679.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:19.672Z,1516731679.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:19.704Z,1516731679.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:20.064Z,1516731680.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:20.079Z,1516731680.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:20.456Z,1516731680.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:20.483Z,1516731680.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:20.858Z,1516731680.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:20.874Z,1516731680.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:21.260Z,1516731681.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:21.284Z,1516731681.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:21.671Z,1516731681.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:21.687Z,1516731681.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:22.068Z,1516731682.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:22.084Z,1516731682.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:22.454Z,1516731682.454 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:22.480Z,1516731682.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:22.856Z,1516731682.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:22.875Z,1516731682.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:23.269Z,1516731683.269 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:23.285Z,1516731683.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:23.672Z,1516731683.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:23.686Z,1516731683.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:24.067Z,1516731684.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:24.082Z,1516731684.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:24.462Z,1516731684.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:24.478Z,1516731684.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:24.848Z,1516731684.848 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:24.885Z,1516731684.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:25.272Z,1516731685.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:25.287Z,1516731685.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:25.672Z,1516731685.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:25.693Z,1516731685.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:26.068Z,1516731686.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:26.084Z,1516731686.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:26.449Z,1516731686.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:26.485Z,1516731686.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:26.862Z,1516731686.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:26.876Z,1516731686.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:27.264Z,1516731687.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:27.292Z,1516731687.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:27.678Z,1516731687.678 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:27.702Z,1516731687.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:28.058Z,1516731688.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:28.085Z,1516731688.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:28.449Z,1516731688.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:28.485Z,1516731688.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:28.850Z,1516731688.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:28.881Z,1516731688.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:29.249Z,1516731689.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:29.286Z,1516731689.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:29.672Z,1516731689.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:29.697Z,1516731689.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:30.071Z,1516731690.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:30.090Z,1516731690.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:30.460Z,1516731690.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:30.496Z,1516731690.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:30.849Z,1516731690.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:30.885Z,1516731690.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:31.248Z,1516731691.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:31.285Z,1516731691.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:31.649Z,1516731691.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:31.687Z,1516731691.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:32.052Z,1516731692.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:32.085Z,1516731692.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:32.459Z,1516731692.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:32.493Z,1516731692.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:32.876Z,1516731692.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:32.892Z,1516731692.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:33.263Z,1516731693.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:33.290Z,1516731693.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:33.649Z,1516731693.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:33.685Z,1516731693.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:34.048Z,1516731694.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:34.063Z,1516731694.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:34.456Z,1516731694.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:34.493Z,1516731694.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:34.857Z,1516731694.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:34.872Z,1516731694.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:35.256Z,1516731695.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:35.271Z,1516731695.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:35.665Z,1516731695.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:35.681Z,1516731695.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:36.071Z,1516731696.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:36.086Z,1516731696.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:36.463Z,1516731696.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:36.484Z,1516731696.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:36.860Z,1516731696.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:36.875Z,1516731696.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:37.256Z,1516731697.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:37.271Z,1516731697.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:37.652Z,1516731697.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:37.687Z,1516731697.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:38.060Z,1516731698.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:38.076Z,1516731698.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:38.462Z,1516731698.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:38.481Z,1516731698.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:38.867Z,1516731698.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:38.882Z,1516731698.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:39.264Z,1516731699.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:39.279Z,1516731699.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:39.662Z,1516731699.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:39.681Z,1516731699.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:40.057Z,1516731700.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:40.072Z,1516731700.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:40.453Z,1516731700.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:40.480Z,1516731700.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:40.856Z,1516731700.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:40.875Z,1516731700.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:41.257Z,1516731701.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:41.272Z,1516731701.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:41.662Z,1516731701.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:41.677Z,1516731701.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:42.063Z,1516731702.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:42.078Z,1516731702.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:42.462Z,1516731702.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:42.477Z,1516731702.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:42.856Z,1516731702.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:42.877Z,1516731702.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:43.260Z,1516731703.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:43.281Z,1516731703.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:43.661Z,1516731703.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:43.676Z,1516731703.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:44.056Z,1516731704.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:44.071Z,1516731704.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:44.460Z,1516731704.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:44.490Z,1516731704.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:44.867Z,1516731704.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:44.882Z,1516731704.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:45.264Z,1516731705.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:45.279Z,1516731705.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:45.657Z,1516731705.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:45.672Z,1516731705.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:46.057Z,1516731706.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:46.072Z,1516731706.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:46.457Z,1516731706.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:46.477Z,1516731706.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:46.856Z,1516731706.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:46.874Z,1516731706.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:47.257Z,1516731707.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:47.272Z,1516731707.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:47.662Z,1516731707.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:47.685Z,1516731707.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:48.065Z,1516731708.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:48.085Z,1516731708.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:48.466Z,1516731708.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:48.481Z,1516731708.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:48.857Z,1516731708.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:48.877Z,1516731708.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:49.256Z,1516731709.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:49.271Z,1516731709.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:49.666Z,1516731709.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:49.681Z,1516731709.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:50.060Z,1516731710.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:50.081Z,1516731710.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:50.466Z,1516731710.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:50.485Z,1516731710.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:50.866Z,1516731710.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:50.881Z,1516731710.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:51.266Z,1516731711.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:51.289Z,1516731711.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:51.660Z,1516731711.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:51.681Z,1516731711.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:52.057Z,1516731712.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:52.071Z,1516731712.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:52.456Z,1516731712.456 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:52.471Z,1516731712.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:52.852Z,1516731712.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:52.879Z,1516731712.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:53.256Z,1516731713.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:53.271Z,1516731713.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:53.667Z,1516731713.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:53.682Z,1516731713.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:54.067Z,1516731714.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:54.090Z,1516731714.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:54.472Z,1516731714.472 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:54.486Z,1516731714.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:54.860Z,1516731714.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:54.879Z,1516731714.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:55.248Z,1516731715.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:55.281Z,1516731715.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:55.649Z,1516731715.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:55.685Z,1516731715.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:56.060Z,1516731716.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:56.079Z,1516731716.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:56.475Z,1516731716.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:56.490Z,1516731716.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:56.873Z,1516731716.873 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:56.888Z,1516731716.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:57.268Z,1516731717.268 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:57.283Z,1516731717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:57.650Z,1516731717.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:57.685Z,1516731717.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:58.049Z,1516731718.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:58.085Z,1516731718.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:58.464Z,1516731718.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:58.484Z,1516731718.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:58.867Z,1516731718.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:58.882Z,1516731718.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:59.249Z,1516731719.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:59.287Z,1516731719.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:21:59.664Z,1516731719.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:21:59.707Z,1516731719.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:00.072Z,1516731720.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:00.093Z,1516731720.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:00.466Z,1516731720.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:00.497Z,1516731720.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:00.846Z,1516731720.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:00.879Z,1516731720.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:01.249Z,1516731721.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:01.281Z,1516731721.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:01.650Z,1516731721.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:01.688Z,1516731721.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:04.751Z,1516731724.751 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:04.774Z,1516731724.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:04.892Z,1516731724.892 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:04.929Z,1516731724.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:05.235Z,1516731725.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:05.250Z,1516731725.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:05.635Z,1516731725.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:05.656Z,1516731725.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:06.028Z,1516731726.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:06.043Z,1516731726.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:06.424Z,1516731726.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:06.439Z,1516731726.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:06.826Z,1516731726.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:06.841Z,1516731726.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:07.228Z,1516731727.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:07.244Z,1516731727.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:07.630Z,1516731727.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:07.646Z,1516731727.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:08.031Z,1516731728.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:08.046Z,1516731728.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:08.430Z,1516731728.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:08.446Z,1516731728.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:08.821Z,1516731728.821 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:08.842Z,1516731728.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:09.225Z,1516731729.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:09.240Z,1516731729.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:09.628Z,1516731729.628 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:09.649Z,1516731729.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:10.024Z,1516731730.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:10.039Z,1516731730.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:10.430Z,1516731730.430 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:10.452Z,1516731730.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:10.835Z,1516731730.835 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:10.850Z,1516731730.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:11.230Z,1516731731.230 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:11.245Z,1516731731.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:11.625Z,1516731731.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:11.640Z,1516731731.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:12.024Z,1516731732.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:12.039Z,1516731732.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:12.420Z,1516731732.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:12.449Z,1516731732.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:12.827Z,1516731732.827 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:12.841Z,1516731732.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:13.221Z,1516731733.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:13.242Z,1516731733.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:13.630Z,1516731733.630 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:13.653Z,1516731733.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:14.034Z,1516731734.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:14.049Z,1516731734.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:14.434Z,1516731734.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:14.457Z,1516731734.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:14.828Z,1516731734.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:14.849Z,1516731734.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:15.225Z,1516731735.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:15.240Z,1516731735.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:15.624Z,1516731735.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:15.644Z,1516731735.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:16.024Z,1516731736.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:16.039Z,1516731736.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:16.434Z,1516731736.434 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:16.449Z,1516731736.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:16.834Z,1516731736.834 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:16.853Z,1516731736.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:17.234Z,1516731737.234 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:17.249Z,1516731737.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:17.625Z,1516731737.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:17.641Z,1516731737.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:18.024Z,1516731738.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:18.043Z,1516731738.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:18.424Z,1516731738.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:18.439Z,1516731738.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:18.826Z,1516731738.826 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:18.844Z,1516731738.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:19.228Z,1516731739.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:19.249Z,1516731739.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:19.634Z,1516731739.634 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:19.649Z,1516731739.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:20.034Z,1516731740.034 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:20.049Z,1516731740.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:20.435Z,1516731740.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:20.450Z,1516731740.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:20.824Z,1516731740.824 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:20.843Z,1516731740.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:21.225Z,1516731741.225 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:21.240Z,1516731741.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:21.624Z,1516731741.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:21.644Z,1516731741.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:22.020Z,1516731742.020 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:22.043Z,1516731742.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:22.435Z,1516731742.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:22.450Z,1516731742.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:22.838Z,1516731742.838 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:22.853Z,1516731742.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:23.235Z,1516731743.235 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:23.249Z,1516731743.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:23.625Z,1516731743.625 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:23.645Z,1516731743.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:24.028Z,1516731744.028 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:24.049Z,1516731744.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:24.416Z,1516731744.416 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:24.451Z,1516731744.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:24.817Z,1516731744.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:24.845Z,1516731744.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:25.217Z,1516731745.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:25.244Z,1516731745.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:25.632Z,1516731745.632 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:25.659Z,1516731745.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:26.044Z,1516731746.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:26.059Z,1516731746.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:26.440Z,1516731746.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:26.455Z,1516731746.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:26.817Z,1516731746.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:26.849Z,1516731746.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:27.216Z,1516731747.216 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:27.245Z,1516731747.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:27.618Z,1516731747.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:27.649Z,1516731747.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:28.016Z,1516731748.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:28.048Z,1516731748.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:28.426Z,1516731748.426 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:28.453Z,1516731748.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:28.837Z,1516731748.837 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:28.868Z,1516731748.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:29.239Z,1516731749.239 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:29.254Z,1516731749.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:29.616Z,1516731749.616 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:29.669Z,1516731749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:30.018Z,1516731750.018 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:30.050Z,1516731750.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:30.420Z,1516731750.420 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:30.457Z,1516731750.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:30.817Z,1516731750.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:30.861Z,1516731750.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:31.221Z,1516731751.221 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:31.256Z,1516731751.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:31.627Z,1516731751.627 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:31.654Z,1516731751.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:32.031Z,1516731752.031 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:32.066Z,1516731752.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:32.427Z,1516731752.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:32.454Z,1516731752.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:32.818Z,1516731752.818 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:32.833Z,1516731752.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:33.217Z,1516731753.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:33.232Z,1516731753.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:33.626Z,1516731753.626 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:33.642Z,1516731753.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:34.025Z,1516731754.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:34.045Z,1516731754.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:34.440Z,1516731754.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:34.471Z,1516731754.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:34.836Z,1516731754.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:34.863Z,1516731754.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:35.240Z,1516731755.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:35.271Z,1516731755.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:35.631Z,1516731755.631 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:35.679Z,1516731755.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:36.021Z,1516731756.021 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:36.042Z,1516731756.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:36.424Z,1516731756.424 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:36.444Z,1516731756.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:36.825Z,1516731756.825 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:36.852Z,1516731756.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:37.220Z,1516731757.220 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:37.244Z,1516731757.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:37.635Z,1516731757.635 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:37.650Z,1516731757.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:38.039Z,1516731758.039 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:38.061Z,1516731758.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:38.439Z,1516731758.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:38.461Z,1516731758.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:38.817Z,1516731758.817 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:38.852Z,1516731758.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:39.217Z,1516731759.217 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:39.253Z,1516731759.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:39.618Z,1516731759.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:39.645Z,1516731759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:40.016Z,1516731760.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:40.049Z,1516731760.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:40.439Z,1516731760.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:40.455Z,1516731760.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:40.832Z,1516731760.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:40.856Z,1516731760.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:41.235Z,1516731761.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:41.250Z,1516731761.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:41.617Z,1516731761.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:41.654Z,1516731761.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:42.014Z,1516731762.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:42.042Z,1516731762.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:42.435Z,1516731762.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:42.451Z,1516731762.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:42.840Z,1516731762.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:42.860Z,1516731762.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:43.240Z,1516731763.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:43.255Z,1516731763.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:43.618Z,1516731763.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:43.649Z,1516731763.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:44.017Z,1516731764.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:44.056Z,1516731764.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:44.428Z,1516731764.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:44.454Z,1516731764.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:44.832Z,1516731764.832 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:44.865Z,1516731764.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:45.227Z,1516731765.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:45.255Z,1516731765.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:45.621Z,1516731765.621 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:45.653Z,1516731765.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:46.024Z,1516731766.024 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:46.061Z,1516731766.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:46.427Z,1516731766.427 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:46.463Z,1516731766.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:46.828Z,1516731766.828 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:46.859Z,1516731766.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:46.861Z,1516731766.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:46.862Z,1516731766.862 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 301 2018-01-23T18:22:46.862Z,1516731766.862 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:22:46.886Z,1516731766.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:22:47.236Z,1516731767.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:47.267Z,1516731767.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:47.280Z,1516731767.280 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:22:47.280Z,1516731767.280 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 301 2018-01-23T18:22:47.629Z,1516731767.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:47.645Z,1516731767.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:47.646Z,1516731767.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:22:47.676Z,1516731767.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:22:47.676Z,1516731767.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:22:48.017Z,1516731768.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:48.037Z,1516731768.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:48.435Z,1516731768.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:48.469Z,1516731768.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:48.843Z,1516731768.843 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:48.868Z,1516731768.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:49.231Z,1516731769.231 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:49.246Z,1516731769.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:49.624Z,1516731769.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:49.639Z,1516731769.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:50.025Z,1516731770.025 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:50.040Z,1516731770.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:50.432Z,1516731770.432 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:50.447Z,1516731770.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:50.831Z,1516731770.831 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:50.846Z,1516731770.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:51.227Z,1516731771.227 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:51.242Z,1516731771.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:51.624Z,1516731771.624 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:51.639Z,1516731771.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:52.022Z,1516731772.022 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:52.050Z,1516731772.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:52.435Z,1516731772.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:52.450Z,1516731772.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:52.836Z,1516731772.836 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:52.863Z,1516731772.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:53.236Z,1516731773.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:53.250Z,1516731773.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:53.617Z,1516731773.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:53.650Z,1516731773.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:54.014Z,1516731774.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:54.050Z,1516731774.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:54.435Z,1516731774.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:54.450Z,1516731774.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:54.840Z,1516731774.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:54.854Z,1516731774.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:55.236Z,1516731775.236 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:55.250Z,1516731775.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:55.633Z,1516731775.633 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:55.649Z,1516731775.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:56.016Z,1516731776.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:56.050Z,1516731776.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:56.439Z,1516731776.439 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:56.454Z,1516731776.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:56.839Z,1516731776.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:56.861Z,1516731776.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:57.240Z,1516731777.240 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:57.255Z,1516731777.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:57.629Z,1516731777.629 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:57.657Z,1516731777.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:58.016Z,1516731778.016 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:58.053Z,1516731778.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:58.440Z,1516731778.440 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:58.455Z,1516731778.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:58.839Z,1516731778.839 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:58.854Z,1516731778.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:59.232Z,1516731779.232 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:59.253Z,1516731779.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:22:59.617Z,1516731779.617 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:22:59.650Z,1516731779.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:00.014Z,1516731780.014 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:00.038Z,1516731780.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:00.428Z,1516731780.428 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:00.465Z,1516731780.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:00.840Z,1516731780.840 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:00.855Z,1516731780.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:00.855Z,1516731780.855 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 301 2018-01-23T18:23:00.855Z,1516731780.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:23:00.857Z,1516731780.857 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:00.857Z,1516731780.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 301 2018-01-23T18:23:00.857Z,1516731780.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:23:00.869Z,1516731780.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:23:00.870Z,1516731780.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:23:01.228Z,1516731781.228 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:01.273Z,1516731781.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:23:01.273Z,1516731781.273 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 301 2018-01-23T18:23:01.274Z,1516731781.274 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:23:01.274Z,1516731781.274 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 301 2018-01-23T18:23:01.618Z,1516731781.618 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:01.643Z,1516731781.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:23:01.644Z,1516731781.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:23:01.644Z,1516731781.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:23:01.645Z,1516731781.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:23:01.645Z,1516731781.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:23:01.645Z,1516731781.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:23:02.017Z,1516731782.017 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:02.060Z,1516731782.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:23:02.061Z,1516731782.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:05.149Z,1516731785.149 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:05.172Z,1516731785.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s. 2018-01-23T18:23:05.173Z,1516731785.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:05.294Z,1516731785.294 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:05.328Z,1516731785.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T18:23:05.329Z,1516731785.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:05.663Z,1516731785.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:05.678Z,1516731785.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:23:05.679Z,1516731785.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:06.053Z,1516731786.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:06.068Z,1516731786.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:23:06.069Z,1516731786.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:06.452Z,1516731786.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:06.470Z,1516731786.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:23:06.471Z,1516731786.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:06.854Z,1516731786.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:06.868Z,1516731786.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:23:06.869Z,1516731786.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:07.248Z,1516731787.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:07.268Z,1516731787.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:23:07.269Z,1516731787.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:07.662Z,1516731787.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:07.677Z,1516731787.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:23:07.678Z,1516731787.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:08.062Z,1516731788.062 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:08.077Z,1516731788.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:23:08.078Z,1516731788.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:08.462Z,1516731788.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:08.476Z,1516731788.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:23:08.477Z,1516731788.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:08.852Z,1516731788.852 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:08.867Z,1516731788.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:23:08.868Z,1516731788.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:09.253Z,1516731789.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:09.268Z,1516731789.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:23:09.269Z,1516731789.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:09.652Z,1516731789.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:09.671Z,1516731789.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:23:09.672Z,1516731789.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:10.052Z,1516731790.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:10.066Z,1516731790.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:23:10.068Z,1516731790.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:10.462Z,1516731790.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:10.477Z,1516731790.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:23:10.478Z,1516731790.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:10.859Z,1516731790.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:10.878Z,1516731790.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:23:10.883Z,1516731790.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:11.263Z,1516731791.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:11.277Z,1516731791.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:23:11.278Z,1516731791.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:11.652Z,1516731791.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:11.692Z,1516731791.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:23:11.693Z,1516731791.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:12.042Z,1516731792.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:12.069Z,1516731792.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:23:12.070Z,1516731792.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:12.463Z,1516731792.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:12.478Z,1516731792.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:23:12.479Z,1516731792.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:12.868Z,1516731792.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:12.882Z,1516731792.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:23:12.883Z,1516731792.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:13.259Z,1516731793.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:13.282Z,1516731793.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:23:13.283Z,1516731793.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:13.646Z,1516731793.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:13.680Z,1516731793.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:23:13.681Z,1516731793.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:14.044Z,1516731794.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:14.078Z,1516731794.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:23:14.079Z,1516731794.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:14.468Z,1516731794.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:14.482Z,1516731794.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:23:14.483Z,1516731794.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:14.865Z,1516731794.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:14.892Z,1516731794.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:23:14.893Z,1516731794.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:15.259Z,1516731795.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:15.292Z,1516731795.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:23:15.293Z,1516731795.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:15.651Z,1516731795.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:15.682Z,1516731795.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:23:15.687Z,1516731795.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:16.045Z,1516731796.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:16.060Z,1516731796.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:23:16.061Z,1516731796.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:16.464Z,1516731796.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:16.491Z,1516731796.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:23:16.492Z,1516731796.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:16.860Z,1516731796.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:16.891Z,1516731796.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:23:16.892Z,1516731796.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:17.264Z,1516731797.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:17.295Z,1516731797.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:23:17.296Z,1516731797.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:17.654Z,1516731797.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:17.669Z,1516731797.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:23:17.670Z,1516731797.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:18.056Z,1516731798.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:18.072Z,1516731798.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:23:18.072Z,1516731798.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:18.455Z,1516731798.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:18.471Z,1516731798.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:23:18.472Z,1516731798.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:18.864Z,1516731798.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:18.884Z,1516731798.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:23:18.885Z,1516731798.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:19.260Z,1516731799.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:19.276Z,1516731799.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:23:19.277Z,1516731799.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:19.652Z,1516731799.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:19.672Z,1516731799.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:23:19.673Z,1516731799.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:20.052Z,1516731800.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:20.081Z,1516731800.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:23:20.082Z,1516731800.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:20.466Z,1516731800.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:20.489Z,1516731800.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:23:20.490Z,1516731800.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:20.865Z,1516731800.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:20.885Z,1516731800.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:21.267Z,1516731801.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:21.282Z,1516731801.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:21.652Z,1516731801.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:21.673Z,1516731801.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:22.051Z,1516731802.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:22.075Z,1516731802.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:22.464Z,1516731802.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:22.479Z,1516731802.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:22.860Z,1516731802.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:22.884Z,1516731802.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:23.264Z,1516731803.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:23.279Z,1516731803.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:23.646Z,1516731803.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:23.691Z,1516731803.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:24.046Z,1516731804.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:24.061Z,1516731804.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:24.463Z,1516731804.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:24.490Z,1516731804.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:24.863Z,1516731804.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:24.898Z,1516731804.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:25.259Z,1516731805.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:25.291Z,1516731805.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:25.651Z,1516731805.651 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:25.673Z,1516731805.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:26.050Z,1516731806.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:26.089Z,1516731806.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:26.467Z,1516731806.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:26.498Z,1516731806.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:26.864Z,1516731806.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:26.891Z,1516731806.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:27.256Z,1516731807.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:27.276Z,1516731807.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:27.655Z,1516731807.655 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:27.670Z,1516731807.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:28.050Z,1516731808.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:28.070Z,1516731808.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:28.462Z,1516731808.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:28.478Z,1516731808.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:28.859Z,1516731808.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:28.887Z,1516731808.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:29.266Z,1516731809.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:29.281Z,1516731809.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:29.653Z,1516731809.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:29.686Z,1516731809.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:30.042Z,1516731810.042 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:30.070Z,1516731810.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:30.463Z,1516731810.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:30.478Z,1516731810.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:30.867Z,1516731810.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:30.888Z,1516731810.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:31.260Z,1516731811.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:31.281Z,1516731811.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:31.646Z,1516731811.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:31.672Z,1516731811.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:32.044Z,1516731812.044 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:32.080Z,1516731812.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:32.463Z,1516731812.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:32.478Z,1516731812.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:32.870Z,1516731812.870 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:32.885Z,1516731812.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:33.264Z,1516731813.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:33.279Z,1516731813.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:33.643Z,1516731813.643 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:33.670Z,1516731813.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:34.045Z,1516731814.045 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:34.076Z,1516731814.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:34.449Z,1516731814.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:34.477Z,1516731814.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:34.859Z,1516731814.859 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:34.882Z,1516731814.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:35.274Z,1516731815.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:35.289Z,1516731815.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:35.660Z,1516731815.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:35.687Z,1516731815.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:36.046Z,1516731816.046 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:36.062Z,1516731816.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:36.444Z,1516731816.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:36.465Z,1516731816.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:36.853Z,1516731816.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:36.868Z,1516731816.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:37.245Z,1516731817.245 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:37.265Z,1516731817.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:37.667Z,1516731817.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:37.691Z,1516731817.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:38.071Z,1516731818.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:38.097Z,1516731818.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:38.463Z,1516731818.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:38.496Z,1516731818.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:38.856Z,1516731818.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:38.893Z,1516731818.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:39.257Z,1516731819.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:39.276Z,1516731819.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:39.650Z,1516731819.650 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:39.665Z,1516731819.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:40.050Z,1516731820.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:40.069Z,1516731820.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:40.453Z,1516731820.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:40.468Z,1516731820.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:40.867Z,1516731820.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:40.891Z,1516731820.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:41.271Z,1516731821.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:41.286Z,1516731821.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:41.664Z,1516731821.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:41.685Z,1516731821.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:42.048Z,1516731822.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:42.068Z,1516731822.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:42.449Z,1516731822.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:42.480Z,1516731822.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:42.862Z,1516731822.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:42.884Z,1516731822.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:43.249Z,1516731823.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:43.269Z,1516731823.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:43.658Z,1516731823.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:43.685Z,1516731823.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:44.067Z,1516731824.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:44.082Z,1516731824.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:44.466Z,1516731824.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:44.481Z,1516731824.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:44.861Z,1516731824.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:44.876Z,1516731824.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:45.262Z,1516731825.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:45.277Z,1516731825.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:45.654Z,1516731825.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:45.673Z,1516731825.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:46.061Z,1516731826.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:46.077Z,1516731826.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:46.462Z,1516731826.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:46.485Z,1516731826.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:46.858Z,1516731826.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:46.890Z,1516731826.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:47.266Z,1516731827.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:47.289Z,1516731827.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:47.667Z,1516731827.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:47.682Z,1516731827.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:48.052Z,1516731828.052 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:48.072Z,1516731828.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:48.452Z,1516731828.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:48.483Z,1516731828.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:48.856Z,1516731828.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:48.877Z,1516731828.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:49.246Z,1516731829.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:49.277Z,1516731829.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:49.670Z,1516731829.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:49.689Z,1516731829.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:50.070Z,1516731830.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:50.086Z,1516731830.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:50.465Z,1516731830.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:50.480Z,1516731830.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:50.851Z,1516731830.851 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:50.874Z,1516731830.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:51.266Z,1516731831.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:51.281Z,1516731831.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:51.645Z,1516731831.645 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:51.677Z,1516731831.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:52.055Z,1516731832.055 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:52.074Z,1516731832.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:52.455Z,1516731832.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:52.476Z,1516731832.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:52.866Z,1516731832.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:52.882Z,1516731832.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:53.271Z,1516731833.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:53.286Z,1516731833.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:53.670Z,1516731833.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:53.690Z,1516731833.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:54.048Z,1516731834.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:54.079Z,1516731834.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:54.450Z,1516731834.450 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:54.477Z,1516731834.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:54.854Z,1516731834.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:54.882Z,1516731834.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:55.247Z,1516731835.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:55.276Z,1516731835.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:55.662Z,1516731835.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:55.694Z,1516731835.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:56.066Z,1516731836.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:56.090Z,1516731836.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:56.473Z,1516731836.473 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:56.488Z,1516731836.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:56.844Z,1516731836.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:56.882Z,1516731836.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:57.248Z,1516731837.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:57.256Z,1516731837.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x11464 got:0x27996 2018-01-23T18:23:57.285Z,1516731837.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:57.652Z,1516731837.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:57.687Z,1516731837.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:58.054Z,1516731838.054 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:58.089Z,1516731838.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:58.455Z,1516731838.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:58.492Z,1516731838.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:58.865Z,1516731838.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:58.897Z,1516731838.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:59.271Z,1516731839.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:59.296Z,1516731839.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:23:59.664Z,1516731839.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:23:59.691Z,1516731839.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:00.050Z,1516731840.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:00.075Z,1516731840.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:00.452Z,1516731840.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:00.475Z,1516731840.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:00.857Z,1516731840.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:00.873Z,1516731840.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:01.252Z,1516731841.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:01.272Z,1516731841.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:01.275Z,1516731841.275 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:24:01.276Z,1516731841.276 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:24:01.276Z,1516731841.276 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:24:01.276Z,1516731841.276 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:24:01.657Z,1516731841.657 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:01.674Z,1516731841.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:01.678Z,1516731841.678 [Default:CheckIn:D] Stopped 2018-01-23T18:24:01.678Z,1516731841.678 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:24:02.061Z,1516731842.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:02.076Z,1516731842.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:02.080Z,1516731842.080 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 906.160286 min 2018-01-23T18:24:02.080Z,1516731842.080 [Default:CheckIn:E] Stopped 2018-01-23T18:24:02.080Z,1516731842.080 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:24:02.080Z,1516731842.080 [Default:CheckIn] Stopped 2018-01-23T18:24:02.081Z,1516731842.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:24:02.081Z,1516731842.081 [Default:CheckIn](INFO): Running loop #89 2018-01-23T18:24:02.081Z,1516731842.081 [Default:CheckIn] Running Loop=89 2018-01-23T18:24:02.081Z,1516731842.081 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:24:02.081Z,1516731842.081 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:24:05.184Z,1516731845.184 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:05.206Z,1516731845.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:05.319Z,1516731845.319 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:05.342Z,1516731845.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:05.660Z,1516731845.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:05.675Z,1516731845.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:06.065Z,1516731846.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:06.080Z,1516731846.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:06.452Z,1516731846.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:06.481Z,1516731846.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:06.867Z,1516731846.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:06.889Z,1516731846.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:07.273Z,1516731847.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:07.288Z,1516731847.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:07.662Z,1516731847.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:07.703Z,1516731847.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:08.060Z,1516731848.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:08.109Z,1516731848.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:08.460Z,1516731848.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:08.469Z,1516731848.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x35397 got:0x37031 2018-01-23T18:24:08.489Z,1516731848.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:08.855Z,1516731848.855 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:08.879Z,1516731848.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:09.258Z,1516731849.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:09.273Z,1516731849.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:09.669Z,1516731849.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:09.687Z,1516731849.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:10.068Z,1516731850.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:10.084Z,1516731850.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:10.465Z,1516731850.465 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:10.493Z,1516731850.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:10.860Z,1516731850.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:10.875Z,1516731850.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:11.246Z,1516731851.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:11.285Z,1516731851.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:11.649Z,1516731851.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:11.678Z,1516731851.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:12.049Z,1516731852.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:12.086Z,1516731852.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:12.463Z,1516731852.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:12.478Z,1516731852.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:12.871Z,1516731852.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:12.889Z,1516731852.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:13.277Z,1516731853.277 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:13.291Z,1516731853.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:13.665Z,1516731853.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:13.688Z,1516731853.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:14.051Z,1516731854.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:14.089Z,1516731854.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:14.453Z,1516731854.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:14.489Z,1516731854.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:14.854Z,1516731854.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:14.884Z,1516731854.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:15.248Z,1516731855.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:15.282Z,1516731855.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:15.670Z,1516731855.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:15.678Z,1516731855.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x44404 got:0x28785 2018-01-23T18:24:15.704Z,1516731855.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:16.063Z,1516731856.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:16.090Z,1516731856.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:16.477Z,1516731856.477 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:16.492Z,1516731856.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:16.849Z,1516731856.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:16.888Z,1516731856.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:17.246Z,1516731857.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:17.281Z,1516731857.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:17.653Z,1516731857.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:17.689Z,1516731857.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:18.049Z,1516731858.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:18.089Z,1516731858.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:18.453Z,1516731858.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:18.491Z,1516731858.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:18.861Z,1516731858.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:18.893Z,1516731858.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:19.272Z,1516731859.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:19.297Z,1516731859.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:19.660Z,1516731859.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:19.699Z,1516731859.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:20.048Z,1516731860.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:20.088Z,1516731860.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:20.449Z,1516731860.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:20.486Z,1516731860.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:20.850Z,1516731860.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:20.885Z,1516731860.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:21.248Z,1516731861.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:21.285Z,1516731861.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:21.665Z,1516731861.665 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:21.696Z,1516731861.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:22.061Z,1516731862.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:22.090Z,1516731862.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:22.467Z,1516731862.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:22.501Z,1516731862.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:22.861Z,1516731862.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:22.902Z,1516731862.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:23.247Z,1516731863.247 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:23.262Z,1516731863.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:23.654Z,1516731863.654 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:23.672Z,1516731863.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:24.058Z,1516731864.058 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:24.073Z,1516731864.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:24.452Z,1516731864.452 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:24.471Z,1516731864.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:24.863Z,1516731864.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:24.882Z,1516731864.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:25.265Z,1516731865.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:25.282Z,1516731865.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:25.662Z,1516731865.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:25.706Z,1516731865.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:26.053Z,1516731866.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:26.076Z,1516731866.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:26.458Z,1516731866.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:26.474Z,1516731866.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:26.856Z,1516731866.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:26.879Z,1516731866.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:27.250Z,1516731867.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:27.273Z,1516731867.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:27.664Z,1516731867.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:27.690Z,1516731867.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:28.064Z,1516731868.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:28.089Z,1516731868.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:28.468Z,1516731868.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:28.486Z,1516731868.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:28.849Z,1516731868.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:28.889Z,1516731868.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:29.253Z,1516731869.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:29.279Z,1516731869.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:29.649Z,1516731869.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:29.675Z,1516731869.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:30.050Z,1516731870.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:30.085Z,1516731870.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:30.449Z,1516731870.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:30.480Z,1516731870.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:30.863Z,1516731870.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:30.898Z,1516731870.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:31.272Z,1516731871.272 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:31.291Z,1516731871.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:31.664Z,1516731871.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:31.697Z,1516731871.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:32.053Z,1516731872.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:32.084Z,1516731872.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:32.453Z,1516731872.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:32.491Z,1516731872.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:32.850Z,1516731872.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:32.865Z,1516731872.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:33.249Z,1516731873.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:33.264Z,1516731873.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:33.685Z,1516731873.685 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:33.700Z,1516731873.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:34.067Z,1516731874.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:34.094Z,1516731874.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:34.468Z,1516731874.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:34.497Z,1516731874.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:34.858Z,1516731874.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:34.873Z,1516731874.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:35.262Z,1516731875.262 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:35.277Z,1516731875.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:35.660Z,1516731875.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:35.676Z,1516731875.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:35.712Z,1516731875.712 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:24:36.056Z,1516731876.056 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:36.080Z,1516731876.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:36.453Z,1516731876.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:36.475Z,1516731876.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:36.876Z,1516731876.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:36.910Z,1516731876.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:37.263Z,1516731877.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:37.280Z,1516731877.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:37.664Z,1516731877.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:37.679Z,1516731877.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:38.057Z,1516731878.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:38.086Z,1516731878.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:38.458Z,1516731878.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:38.474Z,1516731878.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:38.853Z,1516731878.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:38.889Z,1516731878.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:39.256Z,1516731879.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:39.277Z,1516731879.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:39.667Z,1516731879.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:39.683Z,1516731879.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:40.066Z,1516731880.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:40.081Z,1516731880.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:40.470Z,1516731880.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:40.486Z,1516731880.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:40.849Z,1516731880.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:40.878Z,1516731880.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:41.249Z,1516731881.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:41.281Z,1516731881.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:41.649Z,1516731881.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:41.686Z,1516731881.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:42.049Z,1516731882.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:42.086Z,1516731882.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:42.449Z,1516731882.449 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:42.485Z,1516731882.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:42.876Z,1516731882.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:42.894Z,1516731882.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:43.273Z,1516731883.273 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:43.288Z,1516731883.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:43.660Z,1516731883.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:43.693Z,1516731883.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:44.049Z,1516731884.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:44.085Z,1516731884.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:44.455Z,1516731884.455 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:44.484Z,1516731884.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:44.850Z,1516731884.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:44.878Z,1516731884.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:45.248Z,1516731885.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:45.285Z,1516731885.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:45.666Z,1516731885.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:45.694Z,1516731885.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:46.064Z,1516731886.064 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:46.100Z,1516731886.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:46.459Z,1516731886.459 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:46.500Z,1516731886.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:46.853Z,1516731886.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:46.868Z,1516731886.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:47.257Z,1516731887.257 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:47.277Z,1516731887.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:47.658Z,1516731887.658 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:47.673Z,1516731887.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:48.057Z,1516731888.057 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:48.072Z,1516731888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:48.458Z,1516731888.458 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:48.477Z,1516731888.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:48.862Z,1516731888.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:48.881Z,1516731888.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:49.266Z,1516731889.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:49.281Z,1516731889.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:49.664Z,1516731889.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:49.683Z,1516731889.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:50.051Z,1516731890.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:50.077Z,1516731890.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:50.457Z,1516731890.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:50.476Z,1516731890.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:50.861Z,1516731890.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:50.877Z,1516731890.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:51.252Z,1516731891.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:51.283Z,1516731891.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:51.669Z,1516731891.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:51.689Z,1516731891.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:52.070Z,1516731892.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:52.085Z,1516731892.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:52.464Z,1516731892.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:52.491Z,1516731892.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:52.849Z,1516731892.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:52.885Z,1516731892.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:53.249Z,1516731893.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:53.285Z,1516731893.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:53.653Z,1516731893.653 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:53.679Z,1516731893.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:54.049Z,1516731894.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:54.088Z,1516731894.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:54.453Z,1516731894.453 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:54.479Z,1516731894.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:54.864Z,1516731894.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:54.885Z,1516731894.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:55.270Z,1516731895.270 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:55.297Z,1516731895.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:55.667Z,1516731895.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:55.689Z,1516731895.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:56.048Z,1516731896.048 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:56.081Z,1516731896.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:56.448Z,1516731896.448 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:56.484Z,1516731896.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:56.850Z,1516731896.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:56.876Z,1516731896.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:57.248Z,1516731897.248 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:57.281Z,1516731897.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:57.669Z,1516731897.669 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:57.684Z,1516731897.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:58.071Z,1516731898.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:58.086Z,1516731898.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:58.463Z,1516731898.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:58.494Z,1516731898.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:58.849Z,1516731898.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:58.876Z,1516731898.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:59.249Z,1516731899.249 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:59.280Z,1516731899.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:24:59.649Z,1516731899.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:24:59.685Z,1516731899.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:00.049Z,1516731900.049 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:00.064Z,1516731900.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:00.461Z,1516731900.461 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:00.496Z,1516731900.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:00.871Z,1516731900.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:00.898Z,1516731900.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:01.267Z,1516731901.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:01.302Z,1516731901.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:01.667Z,1516731901.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:01.693Z,1516731901.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:02.061Z,1516731902.061 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:02.096Z,1516731902.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:05.161Z,1516731905.161 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:05.193Z,1516731905.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:05.295Z,1516731905.295 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:05.347Z,1516731905.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:05.672Z,1516731905.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:05.696Z,1516731905.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:06.075Z,1516731906.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:06.101Z,1516731906.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:06.471Z,1516731906.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:06.496Z,1516731906.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:06.864Z,1516731906.864 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:06.899Z,1516731906.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:07.264Z,1516731907.264 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:07.304Z,1516731907.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:07.661Z,1516731907.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:07.676Z,1516731907.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:08.059Z,1516731908.059 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:08.074Z,1516731908.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:08.460Z,1516731908.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:08.475Z,1516731908.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:08.868Z,1516731908.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:08.891Z,1516731908.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:09.271Z,1516731909.271 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:09.286Z,1516731909.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:09.663Z,1516731909.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:09.678Z,1516731909.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:10.060Z,1516731910.060 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:10.075Z,1516731910.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:10.460Z,1516731910.460 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:10.475Z,1516731910.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:10.861Z,1516731910.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:10.876Z,1516731910.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:11.266Z,1516731911.266 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:11.281Z,1516731911.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:11.671Z,1516731911.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:11.687Z,1516731911.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:12.071Z,1516731912.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:12.086Z,1516731912.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:12.471Z,1516731912.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:12.486Z,1516731912.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:12.869Z,1516731912.869 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:12.884Z,1516731912.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:13.263Z,1516731913.263 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:13.278Z,1516731913.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:13.661Z,1516731913.661 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:13.677Z,1516731913.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:14.069Z,1516731914.069 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:14.089Z,1516731914.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:14.463Z,1516731914.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:14.479Z,1516731914.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:14.868Z,1516731914.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:14.896Z,1516731914.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:15.274Z,1516731915.274 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:15.290Z,1516731915.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:15.671Z,1516731915.671 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:15.689Z,1516731915.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:16.050Z,1516731916.050 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:16.082Z,1516731916.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:16.466Z,1516731916.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:16.489Z,1516731916.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:16.854Z,1516731916.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:16.889Z,1516731916.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:17.251Z,1516731917.251 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:17.278Z,1516731917.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:17.672Z,1516731917.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:17.687Z,1516731917.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:18.077Z,1516731918.077 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:18.091Z,1516731918.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:18.468Z,1516731918.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:18.495Z,1516731918.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:18.854Z,1516731918.854 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:18.886Z,1516731918.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:19.252Z,1516731919.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:19.292Z,1516731919.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:19.664Z,1516731919.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:19.691Z,1516731919.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:20.068Z,1516731920.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:20.101Z,1516731920.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:20.463Z,1516731920.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:20.500Z,1516731920.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:20.858Z,1516731920.858 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:20.893Z,1516731920.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:21.252Z,1516731921.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:21.273Z,1516731921.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:21.672Z,1516731921.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:21.702Z,1516731921.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:22.063Z,1516731922.063 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:22.078Z,1516731922.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:22.471Z,1516731922.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:22.505Z,1516731922.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:22.865Z,1516731922.865 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:22.880Z,1516731922.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:23.255Z,1516731923.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:23.278Z,1516731923.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:23.675Z,1516731923.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:23.707Z,1516731923.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:24.075Z,1516731924.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:24.109Z,1516731924.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:24.464Z,1516731924.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:24.485Z,1516731924.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:24.863Z,1516731924.863 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:24.878Z,1516731924.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:25.258Z,1516731925.258 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:25.289Z,1516731925.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:25.664Z,1516731925.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:25.685Z,1516731925.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:26.067Z,1516731926.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:26.089Z,1516731926.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:26.467Z,1516731926.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:26.482Z,1516731926.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:26.861Z,1516731926.861 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:26.877Z,1516731926.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:27.259Z,1516731927.259 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:27.281Z,1516731927.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:27.667Z,1516731927.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:27.689Z,1516731927.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:28.066Z,1516731928.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:28.081Z,1516731928.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:28.466Z,1516731928.466 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:28.485Z,1516731928.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:28.862Z,1516731928.862 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:28.877Z,1516731928.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:29.256Z,1516731929.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:29.276Z,1516731929.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:29.666Z,1516731929.666 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:29.689Z,1516731929.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:30.070Z,1516731930.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:30.085Z,1516731930.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:30.470Z,1516731930.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:30.485Z,1516731930.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:30.860Z,1516731930.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:30.879Z,1516731930.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:31.260Z,1516731931.260 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:31.285Z,1516731931.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:31.670Z,1516731931.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:31.693Z,1516731931.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:32.070Z,1516731932.070 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:32.089Z,1516731932.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:32.470Z,1516731932.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:32.485Z,1516731932.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:32.866Z,1516731932.866 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:32.881Z,1516731932.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:33.256Z,1516731933.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:33.283Z,1516731933.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:33.675Z,1516731933.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:33.690Z,1516731933.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:34.071Z,1516731934.071 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:34.086Z,1516731934.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:34.471Z,1516731934.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:34.486Z,1516731934.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:34.860Z,1516731934.860 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:34.897Z,1516731934.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:35.250Z,1516731935.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:35.278Z,1516731935.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:35.672Z,1516731935.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:35.687Z,1516731935.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:36.076Z,1516731936.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:36.096Z,1516731936.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:36.475Z,1516731936.475 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:36.497Z,1516731936.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:36.857Z,1516731936.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:36.883Z,1516731936.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:37.252Z,1516731937.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:37.286Z,1516731937.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:37.672Z,1516731937.672 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:37.687Z,1516731937.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:38.075Z,1516731938.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:38.090Z,1516731938.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:38.471Z,1516731938.471 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:38.486Z,1516731938.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:38.853Z,1516731938.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:38.880Z,1516731938.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:39.252Z,1516731939.252 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:39.285Z,1516731939.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:39.670Z,1516731939.670 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:39.704Z,1516731939.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:40.075Z,1516731940.075 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:40.090Z,1516731940.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:40.468Z,1516731940.468 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:40.489Z,1516731940.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:40.853Z,1516731940.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:40.886Z,1516731940.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:41.250Z,1516731941.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:41.278Z,1516731941.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:41.675Z,1516731941.675 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:41.690Z,1516731941.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:42.090Z,1516731942.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:42.490Z,1516731942.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:42.886Z,1516731942.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:43.285Z,1516731943.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:43.688Z,1516731943.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:44.097Z,1516731944.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:44.487Z,1516731944.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:44.883Z,1516731944.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:45.283Z,1516731945.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:45.740Z,1516731945.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:46.087Z,1516731946.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:46.488Z,1516731946.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:46.889Z,1516731946.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:47.320Z,1516731947.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:47.697Z,1516731947.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:47.699Z,1516731947.699 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:47.699Z,1516731947.699 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 302 2018-01-23T18:25:47.699Z,1516731947.699 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:25:47.727Z,1516731947.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:25:48.076Z,1516731948.076 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:48.092Z,1516731948.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:48.104Z,1516731948.104 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:25:48.104Z,1516731948.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 302 2018-01-23T18:25:48.463Z,1516731948.463 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:48.498Z,1516731948.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:48.500Z,1516731948.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:25:48.500Z,1516731948.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:25:48.500Z,1516731948.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:25:48.853Z,1516731948.853 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:48.884Z,1516731948.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:49.256Z,1516731949.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:49.297Z,1516731949.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:49.667Z,1516731949.667 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:49.694Z,1516731949.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:50.067Z,1516731950.067 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:50.104Z,1516731950.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:50.467Z,1516731950.467 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:50.495Z,1516731950.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:50.850Z,1516731950.850 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:50.865Z,1516731950.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:51.254Z,1516731951.254 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:51.269Z,1516731951.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:51.663Z,1516731951.663 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:51.678Z,1516731951.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:52.068Z,1516731952.068 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:52.103Z,1516731952.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:52.479Z,1516731952.479 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:52.509Z,1516731952.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:52.876Z,1516731952.876 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:52.902Z,1516731952.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:53.255Z,1516731953.255 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:53.271Z,1516731953.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:53.660Z,1516731953.660 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:53.681Z,1516731953.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:54.065Z,1516731954.065 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:54.081Z,1516731954.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:54.457Z,1516731954.457 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:54.477Z,1516731954.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:54.867Z,1516731954.867 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:54.883Z,1516731954.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:55.267Z,1516731955.267 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:55.282Z,1516731955.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:55.664Z,1516731955.664 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:55.679Z,1516731955.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:56.066Z,1516731956.066 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:56.081Z,1516731956.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:56.462Z,1516731956.462 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:56.477Z,1516731956.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:56.857Z,1516731956.857 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:56.888Z,1516731956.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:57.265Z,1516731957.265 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:57.280Z,1516731957.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:57.662Z,1516731957.662 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:57.676Z,1516731957.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:58.072Z,1516731958.072 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:58.087Z,1516731958.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:58.470Z,1516731958.470 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:58.485Z,1516731958.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:58.871Z,1516731958.871 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:58.886Z,1516731958.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:59.256Z,1516731959.256 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:59.279Z,1516731959.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:25:59.656Z,1516731959.656 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:25:59.683Z,1516731959.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:00.053Z,1516731960.053 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:00.089Z,1516731960.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:00.464Z,1516731960.464 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:00.483Z,1516731960.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:00.868Z,1516731960.868 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:00.895Z,1516731960.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:01.291Z,1516731961.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:01.687Z,1516731961.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:01.687Z,1516731961.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 302 2018-01-23T18:26:01.687Z,1516731961.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:26:01.689Z,1516731961.689 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:01.689Z,1516731961.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 302 2018-01-23T18:26:01.689Z,1516731961.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:26:01.703Z,1516731961.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:26:01.703Z,1516731961.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:26:02.099Z,1516731962.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:26:02.099Z,1516731962.099 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 302 2018-01-23T18:26:02.099Z,1516731962.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:26:02.100Z,1516731962.100 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 302 2018-01-23T18:26:02.488Z,1516731962.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:26:02.489Z,1516731962.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:26:02.489Z,1516731962.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:26:02.489Z,1516731962.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:26:02.490Z,1516731962.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:26:02.490Z,1516731962.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:26:05.566Z,1516731965.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T18:26:05.567Z,1516731965.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:05.716Z,1516731965.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:26:05.717Z,1516731965.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:06.068Z,1516731966.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:26:06.069Z,1516731966.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:06.464Z,1516731966.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:26:06.465Z,1516731966.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:06.865Z,1516731966.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:26:06.866Z,1516731966.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:07.256Z,1516731967.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:26:07.257Z,1516731967.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:07.669Z,1516731967.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:26:07.670Z,1516731967.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:08.060Z,1516731968.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:26:08.061Z,1516731968.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:08.454Z,1516731968.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:26:08.455Z,1516731968.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:08.865Z,1516731968.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:26:08.866Z,1516731968.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:09.268Z,1516731969.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:26:09.269Z,1516731969.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:09.668Z,1516731969.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:26:09.669Z,1516731969.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:10.055Z,1516731970.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:26:10.056Z,1516731970.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:10.454Z,1516731970.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:26:10.455Z,1516731970.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:10.858Z,1516731970.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:26:10.863Z,1516731970.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:11.256Z,1516731971.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:26:11.257Z,1516731971.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:11.668Z,1516731971.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:26:11.669Z,1516731971.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:12.065Z,1516731972.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:26:12.066Z,1516731972.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:12.476Z,1516731972.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:26:12.477Z,1516731972.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:12.865Z,1516731972.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:26:12.866Z,1516731972.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:13.256Z,1516731973.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:26:13.257Z,1516731973.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:13.660Z,1516731973.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:26:13.661Z,1516731973.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:14.060Z,1516731974.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:26:14.060Z,1516731974.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:14.469Z,1516731974.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:26:14.470Z,1516731974.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:14.866Z,1516731974.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:26:14.867Z,1516731974.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:15.269Z,1516731975.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:26:15.270Z,1516731975.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:15.666Z,1516731975.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:26:15.667Z,1516731975.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:16.066Z,1516731976.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:26:16.067Z,1516731976.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:16.463Z,1516731976.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:26:16.464Z,1516731976.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:16.863Z,1516731976.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:26:16.864Z,1516731976.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:17.258Z,1516731977.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:26:17.259Z,1516731977.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:17.663Z,1516731977.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:26:17.664Z,1516731977.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:18.066Z,1516731978.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:26:18.067Z,1516731978.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:18.469Z,1516731978.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:26:18.470Z,1516731978.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:18.870Z,1516731978.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:26:18.875Z,1516731978.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:19.260Z,1516731979.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:26:19.261Z,1516731979.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:19.668Z,1516731979.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:26:19.669Z,1516731979.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:20.060Z,1516731980.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:26:20.061Z,1516731980.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:20.468Z,1516731980.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:26:20.469Z,1516731980.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:20.878Z,1516731980.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:26:20.879Z,1516731980.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:21.273Z,1516731981.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:26:21.274Z,1516731981.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:21.673Z,1516731981.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:26:21.674Z,1516731981.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:22.056Z,1516731982.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:22.477Z,1516731982.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:22.861Z,1516731982.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:23.256Z,1516731983.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:23.657Z,1516731983.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:24.086Z,1516731984.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:24.465Z,1516731984.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:24.858Z,1516731984.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:25.254Z,1516731985.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:25.683Z,1516731985.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:26.065Z,1516731986.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:26.459Z,1516731986.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:26.861Z,1516731986.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:27.261Z,1516731987.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:27.661Z,1516731987.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:28.057Z,1516731988.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:28.457Z,1516731988.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:28.864Z,1516731988.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:29.246Z,1516731989.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:29.261Z,1516731989.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:29.646Z,1516731989.646 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:29.661Z,1516731989.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:30.051Z,1516731990.051 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:30.066Z,1516731990.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:30.451Z,1516731990.451 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:30.466Z,1516731990.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:30.849Z,1516731990.849 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:30.872Z,1516731990.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:31.250Z,1516731991.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:31.265Z,1516731991.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:31.642Z,1516731991.642 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:31.664Z,1516731991.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:32.047Z,1516731992.047 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:32.063Z,1516731992.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:32.435Z,1516731992.435 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:32.473Z,1516731992.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:32.856Z,1516731992.856 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:32.872Z,1516731992.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:33.250Z,1516731993.250 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:33.274Z,1516731993.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:33.652Z,1516731993.652 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:33.667Z,1516731993.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:34.033Z,1516731994.033 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:34.069Z,1516731994.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:34.433Z,1516731994.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:34.469Z,1516731994.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:34.833Z,1516731994.833 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:26:34.864Z,1516731994.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:35.269Z,1516731995.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:35.668Z,1516731995.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:36.093Z,1516731996.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:36.488Z,1516731996.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:36.884Z,1516731996.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:37.285Z,1516731997.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:37.727Z,1516731997.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:38.092Z,1516731998.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:38.468Z,1516731998.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:38.882Z,1516731998.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:39.290Z,1516731999.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:39.685Z,1516731999.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:40.089Z,1516732000.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:40.473Z,1516732000.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:40.885Z,1516732000.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:41.296Z,1516732001.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:41.672Z,1516732001.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:42.081Z,1516732002.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:42.484Z,1516732002.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:42.877Z,1516732002.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:43.328Z,1516732003.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:43.697Z,1516732003.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:44.082Z,1516732004.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:44.522Z,1516732004.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:44.940Z,1516732004.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:45.282Z,1516732005.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:45.699Z,1516732005.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:46.125Z,1516732006.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:46.494Z,1516732006.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:46.869Z,1516732006.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:47.276Z,1516732007.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:47.675Z,1516732007.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:48.081Z,1516732008.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:48.488Z,1516732008.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:48.878Z,1516732008.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:49.281Z,1516732009.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:49.679Z,1516732009.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:50.069Z,1516732010.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:50.466Z,1516732010.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:50.932Z,1516732010.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:51.281Z,1516732011.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:51.691Z,1516732011.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:52.089Z,1516732012.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:52.481Z,1516732012.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:52.897Z,1516732012.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:53.297Z,1516732013.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:53.686Z,1516732013.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:54.097Z,1516732014.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:54.516Z,1516732014.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:54.885Z,1516732014.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:55.286Z,1516732015.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:55.686Z,1516732015.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:56.062Z,1516732016.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:56.474Z,1516732016.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:56.921Z,1516732016.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:57.281Z,1516732017.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:57.718Z,1516732017.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:58.088Z,1516732018.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:58.474Z,1516732018.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:58.862Z,1516732018.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:59.350Z,1516732019.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:26:59.696Z,1516732019.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:00.145Z,1516732020.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:00.493Z,1516732020.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:00.858Z,1516732020.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:01.256Z,1516732021.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:01.656Z,1516732021.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:02.056Z,1516732022.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:02.455Z,1516732022.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:02.859Z,1516732022.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:05.985Z,1516732025.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:06.137Z,1516732026.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:06.452Z,1516732026.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:06.857Z,1516732026.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:07.258Z,1516732027.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:07.653Z,1516732027.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:08.059Z,1516732028.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:08.459Z,1516732028.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:08.858Z,1516732028.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:09.254Z,1516732029.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:09.669Z,1516732029.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:10.058Z,1516732030.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:10.453Z,1516732030.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:10.867Z,1516732030.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:11.273Z,1516732031.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:11.663Z,1516732031.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:12.053Z,1516732032.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:12.460Z,1516732032.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:12.846Z,1516732032.846 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:12.872Z,1516732032.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:13.246Z,1516732033.246 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:13.261Z,1516732033.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:13.659Z,1516732033.659 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:13.677Z,1516732033.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:14.032Z,1516732034.032 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:14.060Z,1516732034.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:14.433Z,1516732034.433 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:14.460Z,1516732034.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:14.844Z,1516732034.844 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:14.875Z,1516732034.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:15.252Z,1516732035.253 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:15.267Z,1516732035.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:15.649Z,1516732035.649 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:15.669Z,1516732035.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:16.029Z,1516732036.029 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:27:16.062Z,1516732036.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:16.461Z,1516732036.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:16.867Z,1516732036.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:17.266Z,1516732037.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:17.673Z,1516732037.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:18.060Z,1516732038.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:18.459Z,1516732038.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:18.870Z,1516732038.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:19.263Z,1516732039.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:19.664Z,1516732039.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:20.064Z,1516732040.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:20.461Z,1516732040.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:20.867Z,1516732040.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:21.272Z,1516732041.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:21.662Z,1516732041.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:22.059Z,1516732042.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:22.463Z,1516732042.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:22.864Z,1516732042.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:23.267Z,1516732043.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:23.673Z,1516732043.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:24.059Z,1516732044.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:24.457Z,1516732044.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:24.869Z,1516732044.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:25.261Z,1516732045.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:25.664Z,1516732045.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:26.060Z,1516732046.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:26.465Z,1516732046.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:26.862Z,1516732046.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:27.272Z,1516732047.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:27.671Z,1516732047.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:28.063Z,1516732048.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:28.464Z,1516732048.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:28.871Z,1516732048.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:29.268Z,1516732049.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:29.672Z,1516732049.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:30.056Z,1516732050.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:30.467Z,1516732050.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:30.873Z,1516732050.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:31.272Z,1516732051.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:31.663Z,1516732051.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:32.069Z,1516732052.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:32.449Z,1516732052.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:32.872Z,1516732052.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:33.284Z,1516732053.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:33.672Z,1516732053.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:34.072Z,1516732054.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:34.457Z,1516732054.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:34.858Z,1516732054.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:35.282Z,1516732055.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:35.662Z,1516732055.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:36.052Z,1516732056.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:36.450Z,1516732056.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:36.886Z,1516732056.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:37.258Z,1516732057.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:37.666Z,1516732057.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:38.057Z,1516732058.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:38.451Z,1516732058.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:38.857Z,1516732058.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:39.258Z,1516732059.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:39.661Z,1516732059.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:40.057Z,1516732060.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:40.452Z,1516732060.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:40.861Z,1516732060.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:41.270Z,1516732061.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:41.669Z,1516732061.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:42.056Z,1516732062.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:42.451Z,1516732062.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:42.891Z,1516732062.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:43.265Z,1516732063.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:43.662Z,1516732063.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:44.055Z,1516732064.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:44.458Z,1516732064.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:44.861Z,1516732064.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:45.271Z,1516732065.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:45.669Z,1516732065.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:46.077Z,1516732066.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:46.462Z,1516732066.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:46.861Z,1516732066.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:47.262Z,1516732067.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:47.662Z,1516732067.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:48.077Z,1516732068.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:48.477Z,1516732068.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:48.865Z,1516732068.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:49.266Z,1516732069.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:49.665Z,1516732069.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:50.064Z,1516732070.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:50.454Z,1516732070.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:50.872Z,1516732070.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:51.272Z,1516732071.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:51.676Z,1516732071.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:52.065Z,1516732072.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:52.469Z,1516732072.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:52.860Z,1516732072.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:53.271Z,1516732073.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:53.643Z,1516732073.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:54.081Z,1516732074.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:54.478Z,1516732074.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:54.879Z,1516732074.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:55.253Z,1516732075.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:55.654Z,1516732075.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:56.057Z,1516732076.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:56.465Z,1516732076.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:56.856Z,1516732076.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:57.265Z,1516732077.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:57.665Z,1516732077.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:58.062Z,1516732078.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:58.451Z,1516732078.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:58.855Z,1516732078.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:59.265Z,1516732079.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:27:59.659Z,1516732079.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:00.077Z,1516732080.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:00.469Z,1516732080.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:00.862Z,1516732080.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:01.265Z,1516732081.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:01.669Z,1516732081.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:02.064Z,1516732082.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:02.456Z,1516732082.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:02.861Z,1516732082.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:03.270Z,1516732083.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:06.369Z,1516732086.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:06.499Z,1516732086.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:06.861Z,1516732086.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:07.254Z,1516732087.254 [PNI_TCM](ERROR): CRC does not match. Expected:0x54792 got:0x17072 2018-01-23T18:28:07.273Z,1516732087.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:07.660Z,1516732087.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:08.073Z,1516732088.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:08.480Z,1516732088.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:08.866Z,1516732088.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:09.261Z,1516732089.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:09.665Z,1516732089.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:10.068Z,1516732090.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:10.463Z,1516732090.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:10.870Z,1516732090.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:11.264Z,1516732091.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:11.688Z,1516732091.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:12.072Z,1516732092.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:12.467Z,1516732092.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:12.867Z,1516732092.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:13.276Z,1516732093.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:13.671Z,1516732093.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:14.069Z,1516732094.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:14.470Z,1516732094.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:14.873Z,1516732094.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:15.247Z,1516732095.247 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T18:28:15.275Z,1516732095.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:15.647Z,1516732095.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:16.047Z,1516732096.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:16.477Z,1516732096.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:16.878Z,1516732096.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.402422 seconds old. 2018-01-23T18:28:16.884Z,1516732096.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:16.884Z,1516732096.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.407009 seconds old. 2018-01-23T18:28:16.885Z,1516732096.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.407379 seconds old. 2018-01-23T18:28:17.275Z,1516732097.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.782772 seconds old. 2018-01-23T18:28:17.276Z,1516732097.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:17.277Z,1516732097.277 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.799308 seconds old. 2018-01-23T18:28:17.278Z,1516732097.278 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799666 seconds old. 2018-01-23T18:28:17.676Z,1516732097.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.199565 seconds old. 2018-01-23T18:28:17.677Z,1516732097.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:17.677Z,1516732097.677 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.199901 seconds old. 2018-01-23T18:28:17.678Z,1516732097.678 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.200239 seconds old. 2018-01-23T18:28:18.078Z,1516732098.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.601678 seconds old. 2018-01-23T18:28:18.079Z,1516732098.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:18.080Z,1516732098.080 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602235 seconds old. 2018-01-23T18:28:18.081Z,1516732098.081 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602570 seconds old. 2018-01-23T18:28:18.455Z,1516732098.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:18.856Z,1516732098.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:19.259Z,1516732099.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:19.678Z,1516732099.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:20.058Z,1516732100.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:20.486Z,1516732100.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:20.861Z,1516732100.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:21.284Z,1516732101.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:21.664Z,1516732101.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:22.055Z,1516732102.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:22.462Z,1516732102.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:22.886Z,1516732102.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:23.265Z,1516732103.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:23.673Z,1516732103.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:24.077Z,1516732104.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:24.474Z,1516732104.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:24.862Z,1516732104.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:25.265Z,1516732105.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:25.663Z,1516732105.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:26.101Z,1516732106.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:26.462Z,1516732106.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x2069 got:0x16784 2018-01-23T18:28:26.481Z,1516732106.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:26.861Z,1516732106.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x19781 got:0x27997 2018-01-23T18:28:26.889Z,1516732106.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:27.258Z,1516732107.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:27.662Z,1516732107.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:28.062Z,1516732108.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:28.466Z,1516732108.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:28.857Z,1516732108.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:29.265Z,1516732109.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:29.682Z,1516732109.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:30.078Z,1516732110.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:30.466Z,1516732110.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:30.869Z,1516732110.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:31.249Z,1516732111.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:31.674Z,1516732111.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:32.077Z,1516732112.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:32.494Z,1516732112.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:32.875Z,1516732112.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:33.253Z,1516732113.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:33.655Z,1516732113.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:34.051Z,1516732114.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:34.459Z,1516732114.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:34.852Z,1516732114.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:35.262Z,1516732115.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:35.658Z,1516732115.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:36.057Z,1516732116.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:36.451Z,1516732116.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:36.864Z,1516732116.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:37.252Z,1516732117.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:37.651Z,1516732117.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:38.061Z,1516732118.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:38.461Z,1516732118.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:38.858Z,1516732118.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:39.251Z,1516732119.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:39.652Z,1516732119.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:40.056Z,1516732120.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:40.453Z,1516732120.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:40.851Z,1516732120.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:41.261Z,1516732121.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:41.658Z,1516732121.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:42.057Z,1516732122.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:42.455Z,1516732122.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:42.850Z,1516732122.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:43.252Z,1516732123.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:43.651Z,1516732123.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:44.070Z,1516732124.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:44.461Z,1516732124.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:44.861Z,1516732124.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:45.251Z,1516732125.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:45.652Z,1516732125.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:46.051Z,1516732126.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:46.454Z,1516732126.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:46.851Z,1516732126.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:47.212Z,1516732127.212 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T18:28:47.212Z,1516732127.212 [NAL9602] Data Fault, FailCount= 3 2018-01-23T18:28:47.212Z,1516732127.212 [NAL9602](ERROR): Data Fault 2018-01-23T18:28:47.264Z,1516732127.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:47.277Z,1516732127.277 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T18:28:47.612Z,1516732127.612 [NAL9602](INFO): Powering down 2018-01-23T18:28:47.672Z,1516732127.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:48.054Z,1516732128.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:48.461Z,1516732128.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:48.474Z,1516732128.474 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T18:28:48.474Z,1516732128.474 [NAL9602] No Fault, FailCount= 3 2018-01-23T18:28:48.859Z,1516732128.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:48.861Z,1516732128.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:48.861Z,1516732128.861 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 303 2018-01-23T18:28:48.861Z,1516732128.861 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:28:48.873Z,1516732128.873 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:28:49.259Z,1516732129.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:49.271Z,1516732129.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:28:49.272Z,1516732129.272 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 303 2018-01-23T18:28:49.656Z,1516732129.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:49.657Z,1516732129.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:28:49.658Z,1516732129.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:28:49.658Z,1516732129.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:28:50.059Z,1516732130.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:50.458Z,1516732130.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:50.859Z,1516732130.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:51.252Z,1516732131.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:51.658Z,1516732131.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:52.058Z,1516732132.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:52.459Z,1516732132.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:52.853Z,1516732132.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:53.263Z,1516732133.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:53.663Z,1516732133.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:54.067Z,1516732134.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:54.465Z,1516732134.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:54.863Z,1516732134.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:55.255Z,1516732135.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:55.642Z,1516732135.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:56.074Z,1516732136.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:56.450Z,1516732136.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:56.867Z,1516732136.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:57.271Z,1516732137.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:57.655Z,1516732137.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:58.055Z,1516732138.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:58.452Z,1516732138.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:58.851Z,1516732138.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:59.261Z,1516732139.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:28:59.661Z,1516732139.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:00.056Z,1516732140.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:00.461Z,1516732140.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:00.861Z,1516732140.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:01.255Z,1516732141.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:01.653Z,1516732141.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:02.054Z,1516732142.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:02.462Z,1516732142.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:02.466Z,1516732142.466 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:24:02.1Z 2018-01-23T18:29:02.466Z,1516732142.466 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:29:02.466Z,1516732142.466 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:29:02.853Z,1516732142.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:02.854Z,1516732142.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 303 2018-01-23T18:29:02.854Z,1516732142.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:29:02.856Z,1516732142.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:02.856Z,1516732142.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 303 2018-01-23T18:29:02.856Z,1516732142.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:29:02.868Z,1516732142.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:29:02.868Z,1516732142.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:29:03.416Z,1516732143.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:29:03.416Z,1516732143.416 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 303 2018-01-23T18:29:03.416Z,1516732143.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:29:03.416Z,1516732143.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 303 2018-01-23T18:29:03.672Z,1516732143.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:29:03.672Z,1516732143.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:29:03.672Z,1516732143.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:29:03.673Z,1516732143.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:29:03.673Z,1516732143.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:29:03.674Z,1516732143.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:29:06.786Z,1516732146.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T18:29:06.804Z,1516732146.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:06.860Z,1516732146.860 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0356.lzma 2018-01-23T18:29:06.922Z,1516732146.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T18:29:06.927Z,1516732146.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:07.312Z,1516732147.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T18:29:07.313Z,1516732147.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:07.662Z,1516732147.662 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0356.lzma.bak 2018-01-23T18:29:07.662Z,1516732147.662 [DataOverHttps](INFO): SBD MOMSN=7756425 2018-01-23T18:29:07.724Z,1516732147.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T18:29:07.725Z,1516732147.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:08.364Z,1516732148.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s. 2018-01-23T18:29:08.365Z,1516732148.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:08.522Z,1516732148.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T18:29:08.523Z,1516732148.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:11.593Z,1516732151.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T18:29:11.594Z,1516732151.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:11.721Z,1516732151.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T18:29:11.722Z,1516732151.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:12.109Z,1516732152.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T18:29:12.110Z,1516732152.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:12.496Z,1516732152.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:29:12.496Z,1516732152.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:12.891Z,1516732152.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:29:12.892Z,1516732152.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:13.311Z,1516732153.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T18:29:13.312Z,1516732153.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:16.394Z,1516732156.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s. 2018-01-23T18:29:16.395Z,1516732156.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:16.482Z,1516732156.482 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0357.lzma 2018-01-23T18:29:16.556Z,1516732156.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T18:29:16.557Z,1516732156.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:16.860Z,1516732156.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:29:16.861Z,1516732156.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:17.218Z,1516732157.218 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0357.lzma.bak 2018-01-23T18:29:17.218Z,1516732157.218 [DataOverHttps](INFO): SBD MOMSN=7756427 2018-01-23T18:29:17.281Z,1516732157.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:29:17.282Z,1516732157.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:17.875Z,1516732157.875 [NAL9602](INFO): Powering up NAL9602 2018-01-23T18:29:17.924Z,1516732157.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T18:29:17.925Z,1516732157.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:17.928Z,1516732157.928 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T18:29:17.929Z,1516732157.929 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T18:29:17.929Z,1516732157.929 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T18:29:18.076Z,1516732158.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:29:18.077Z,1516732158.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:21.162Z,1516732161.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T18:29:21.163Z,1516732161.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:21.300Z,1516732161.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:29:21.301Z,1516732161.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:21.633Z,1516732161.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:29:21.633Z,1516732161.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:22.026Z,1516732162.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:29:22.028Z,1516732162.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:22.453Z,1516732162.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:29:22.454Z,1516732162.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:22.830Z,1516732162.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:29:22.831Z,1516732162.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:23.223Z,1516732163.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:23.635Z,1516732163.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:24.027Z,1516732164.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:24.424Z,1516732164.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:24.826Z,1516732164.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:25.236Z,1516732165.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:25.626Z,1516732165.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:26.026Z,1516732166.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:26.426Z,1516732166.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:26.824Z,1516732166.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:27.233Z,1516732167.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:27.626Z,1516732167.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:28.036Z,1516732168.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:28.441Z,1516732168.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:28.788Z,1516732168.788 [NAL9602](INFO): NAL9602 initialized 2018-01-23T18:29:28.831Z,1516732168.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:29.227Z,1516732169.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:29.642Z,1516732169.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:30.046Z,1516732170.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:30.437Z,1516732170.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:30.841Z,1516732170.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:31.235Z,1516732171.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:31.642Z,1516732171.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:32.035Z,1516732172.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:32.433Z,1516732172.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:32.850Z,1516732172.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:33.247Z,1516732173.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:33.642Z,1516732173.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:34.048Z,1516732174.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:34.419Z,1516732174.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:34.820Z,1516732174.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:35.244Z,1516732175.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:35.634Z,1516732175.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:36.034Z,1516732176.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:36.437Z,1516732176.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:36.821Z,1516732176.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:37.240Z,1516732177.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:37.641Z,1516732177.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:38.041Z,1516732178.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:38.440Z,1516732178.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:38.852Z,1516732178.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:39.246Z,1516732179.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:39.648Z,1516732179.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:40.041Z,1516732180.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:40.440Z,1516732180.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:40.832Z,1516732180.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:41.224Z,1516732181.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:41.635Z,1516732181.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:42.057Z,1516732182.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:42.443Z,1516732182.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:42.826Z,1516732182.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:43.236Z,1516732183.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:43.620Z,1516732183.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:44.021Z,1516732184.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:44.429Z,1516732184.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:44.857Z,1516732184.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:45.234Z,1516732185.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:45.651Z,1516732185.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:46.029Z,1516732186.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:46.427Z,1516732186.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:46.833Z,1516732186.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:47.226Z,1516732187.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:47.630Z,1516732187.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:48.034Z,1516732188.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:48.437Z,1516732188.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:48.826Z,1516732188.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:49.233Z,1516732189.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:49.626Z,1516732189.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:50.029Z,1516732190.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:50.427Z,1516732190.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:50.832Z,1516732190.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:51.233Z,1516732191.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:51.637Z,1516732191.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:52.027Z,1516732192.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:52.432Z,1516732192.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:52.836Z,1516732192.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:53.231Z,1516732193.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:53.638Z,1516732193.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:54.041Z,1516732194.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:54.437Z,1516732194.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:54.828Z,1516732194.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:55.228Z,1516732195.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:55.641Z,1516732195.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:56.037Z,1516732196.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:56.437Z,1516732196.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:56.832Z,1516732196.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:57.225Z,1516732197.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:57.645Z,1516732197.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:58.040Z,1516732198.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:58.442Z,1516732198.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:58.830Z,1516732198.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:59.227Z,1516732199.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:29:59.639Z,1516732199.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:00.041Z,1516732200.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:00.437Z,1516732200.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:00.829Z,1516732200.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:01.238Z,1516732201.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:01.637Z,1516732201.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:02.038Z,1516732202.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:02.437Z,1516732202.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:02.832Z,1516732202.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:03.225Z,1516732203.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:03.639Z,1516732203.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:04.042Z,1516732204.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:04.440Z,1516732204.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:04.829Z,1516732204.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:05.239Z,1516732205.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:05.639Z,1516732205.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:06.050Z,1516732206.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:06.438Z,1516732206.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:06.836Z,1516732206.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:07.233Z,1516732207.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:07.638Z,1516732207.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:08.038Z,1516732208.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:08.439Z,1516732208.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:08.839Z,1516732208.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:09.236Z,1516732209.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:09.638Z,1516732209.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:10.041Z,1516732210.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:10.440Z,1516732210.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:10.836Z,1516732210.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:11.241Z,1516732211.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:11.644Z,1516732211.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:12.042Z,1516732212.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:12.448Z,1516732212.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:12.832Z,1516732212.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:13.245Z,1516732213.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:13.651Z,1516732213.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:14.038Z,1516732214.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:14.449Z,1516732214.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:14.823Z,1516732214.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:15.223Z,1516732215.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:15.651Z,1516732215.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:16.055Z,1516732216.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:16.454Z,1516732216.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:16.828Z,1516732216.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:17.232Z,1516732217.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:17.637Z,1516732217.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:18.041Z,1516732218.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:18.436Z,1516732218.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:21.538Z,1516732221.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:21.685Z,1516732221.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:22.038Z,1516732222.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:22.442Z,1516732222.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:22.838Z,1516732222.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:23.228Z,1516732223.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:23.629Z,1516732223.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:24.041Z,1516732224.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:24.432Z,1516732224.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:24.839Z,1516732224.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:25.244Z,1516732225.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:25.643Z,1516732225.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:26.029Z,1516732226.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:26.438Z,1516732226.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:26.832Z,1516732226.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:27.228Z,1516732227.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:27.645Z,1516732227.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:28.040Z,1516732228.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:28.442Z,1516732228.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:28.830Z,1516732228.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:29.232Z,1516732229.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:29.642Z,1516732229.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:30.045Z,1516732230.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:30.445Z,1516732230.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:30.833Z,1516732230.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:31.232Z,1516732231.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:31.639Z,1516732231.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:32.040Z,1516732232.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:32.449Z,1516732232.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:32.841Z,1516732232.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:33.236Z,1516732233.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:33.637Z,1516732233.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:34.031Z,1516732234.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:34.432Z,1516732234.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:34.838Z,1516732234.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:35.241Z,1516732235.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:35.640Z,1516732235.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:36.035Z,1516732236.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:36.438Z,1516732236.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:36.836Z,1516732236.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:37.232Z,1516732237.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:37.630Z,1516732237.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:38.040Z,1516732238.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:38.449Z,1516732238.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:38.849Z,1516732238.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:39.236Z,1516732239.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:39.633Z,1516732239.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:40.031Z,1516732240.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:40.432Z,1516732240.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:40.849Z,1516732240.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:41.244Z,1516732241.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:41.642Z,1516732241.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:42.045Z,1516732242.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:42.456Z,1516732242.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:42.818Z,1516732242.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:43.224Z,1516732243.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:43.628Z,1516732243.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:44.030Z,1516732244.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:44.438Z,1516732244.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:44.861Z,1516732244.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:45.225Z,1516732245.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:45.628Z,1516732245.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:46.027Z,1516732246.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:46.428Z,1516732246.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:46.830Z,1516732246.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:47.234Z,1516732247.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:47.637Z,1516732247.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:48.033Z,1516732248.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:48.433Z,1516732248.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:48.825Z,1516732248.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:49.229Z,1516732249.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:49.633Z,1516732249.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:50.034Z,1516732250.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:50.446Z,1516732250.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:50.841Z,1516732250.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:51.228Z,1516732251.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:51.628Z,1516732251.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:52.034Z,1516732252.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:52.428Z,1516732252.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:52.837Z,1516732252.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:53.241Z,1516732253.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:53.642Z,1516732253.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:54.030Z,1516732254.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:54.440Z,1516732254.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:54.830Z,1516732254.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:55.230Z,1516732255.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:55.636Z,1516732255.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:56.039Z,1516732256.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:56.441Z,1516732256.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:56.847Z,1516732256.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:57.231Z,1516732257.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:57.642Z,1516732257.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:58.041Z,1516732258.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:58.435Z,1516732258.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:58.839Z,1516732258.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:59.247Z,1516732259.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:30:59.648Z,1516732259.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:00.039Z,1516732260.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:00.432Z,1516732260.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:00.832Z,1516732260.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:01.221Z,1516732261.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:01.632Z,1516732261.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:02.034Z,1516732262.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:02.464Z,1516732262.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:02.833Z,1516732262.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:03.230Z,1516732263.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:03.630Z,1516732263.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:04.029Z,1516732264.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:04.429Z,1516732264.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:04.833Z,1516732264.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:05.233Z,1516732265.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:05.634Z,1516732265.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:06.028Z,1516732266.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:06.433Z,1516732266.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:06.832Z,1516732266.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:07.229Z,1516732267.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:07.632Z,1516732267.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:08.033Z,1516732268.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:08.434Z,1516732268.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:08.832Z,1516732268.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:09.232Z,1516732269.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:09.632Z,1516732269.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:10.028Z,1516732270.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:10.428Z,1516732270.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:10.837Z,1516732270.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:11.238Z,1516732271.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:11.634Z,1516732271.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:12.033Z,1516732272.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:12.430Z,1516732272.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:12.832Z,1516732272.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:13.229Z,1516732273.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:13.626Z,1516732273.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:14.034Z,1516732274.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:14.434Z,1516732274.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:14.840Z,1516732274.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:15.230Z,1516732275.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:15.627Z,1516732275.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:16.027Z,1516732276.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:16.428Z,1516732276.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:16.837Z,1516732276.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:17.237Z,1516732277.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:17.634Z,1516732277.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:18.027Z,1516732278.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:18.426Z,1516732278.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:18.833Z,1516732278.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:21.967Z,1516732281.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:22.104Z,1516732282.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:22.434Z,1516732282.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:22.846Z,1516732282.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:23.241Z,1516732283.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:23.635Z,1516732283.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:24.033Z,1516732284.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:24.435Z,1516732284.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:24.841Z,1516732284.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:25.241Z,1516732285.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:25.638Z,1516732285.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:26.037Z,1516732286.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:26.432Z,1516732286.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:26.831Z,1516732286.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:27.240Z,1516732287.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:27.632Z,1516732287.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:28.041Z,1516732288.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:28.442Z,1516732288.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:28.837Z,1516732288.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:29.230Z,1516732289.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:29.640Z,1516732289.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:30.040Z,1516732290.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:30.434Z,1516732290.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:30.837Z,1516732290.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:31.245Z,1516732291.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:31.638Z,1516732291.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:32.031Z,1516732292.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:32.432Z,1516732292.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:32.830Z,1516732292.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:33.240Z,1516732293.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:33.636Z,1516732293.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:34.037Z,1516732294.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:34.438Z,1516732294.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:34.837Z,1516732294.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:35.230Z,1516732295.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:35.637Z,1516732295.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:36.034Z,1516732296.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:36.449Z,1516732296.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:36.842Z,1516732296.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:37.280Z,1516732297.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:37.653Z,1516732297.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:38.085Z,1516732298.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:38.496Z,1516732298.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:38.898Z,1516732298.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:39.263Z,1516732299.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:39.651Z,1516732299.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:40.055Z,1516732300.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:40.474Z,1516732300.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:40.857Z,1516732300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:41.294Z,1516732301.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:41.653Z,1516732301.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:42.052Z,1516732302.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:42.469Z,1516732302.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:42.853Z,1516732302.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:43.285Z,1516732303.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:43.650Z,1516732303.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:44.102Z,1516732304.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:44.531Z,1516732304.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:44.846Z,1516732304.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:45.264Z,1516732305.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:45.665Z,1516732305.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:46.093Z,1516732306.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:46.465Z,1516732306.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:46.876Z,1516732306.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:47.253Z,1516732307.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:47.633Z,1516732307.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:48.034Z,1516732308.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:48.441Z,1516732308.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:48.869Z,1516732308.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:49.276Z,1516732309.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:49.669Z,1516732309.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:49.676Z,1516732309.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:49.676Z,1516732309.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 304 2018-01-23T18:31:49.676Z,1516732309.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:31:49.722Z,1516732309.722 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:31:50.076Z,1516732310.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:50.097Z,1516732310.097 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:31:50.097Z,1516732310.097 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 304 2018-01-23T18:31:50.494Z,1516732310.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:50.495Z,1516732310.495 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:31:50.495Z,1516732310.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:31:50.496Z,1516732310.496 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:31:50.847Z,1516732310.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:51.251Z,1516732311.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:51.682Z,1516732311.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:52.053Z,1516732312.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:52.491Z,1516732312.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:52.895Z,1516732312.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:53.257Z,1516732313.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:53.666Z,1516732313.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:54.070Z,1516732314.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:54.441Z,1516732314.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:54.884Z,1516732314.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:55.297Z,1516732315.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:55.653Z,1516732315.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:56.064Z,1516732316.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:56.486Z,1516732316.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:56.848Z,1516732316.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:57.241Z,1516732317.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:57.645Z,1516732317.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:58.049Z,1516732318.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:58.449Z,1516732318.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:58.845Z,1516732318.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:59.231Z,1516732319.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:31:59.648Z,1516732319.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:00.049Z,1516732320.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:00.447Z,1516732320.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:00.849Z,1516732320.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:01.249Z,1516732321.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:01.650Z,1516732321.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:02.045Z,1516732322.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:02.454Z,1516732322.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:02.829Z,1516732322.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:03.229Z,1516732323.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:03.656Z,1516732323.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:04.054Z,1516732324.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:04.054Z,1516732324.054 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 304 2018-01-23T18:32:04.054Z,1516732324.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:32:04.056Z,1516732324.056 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:04.056Z,1516732324.056 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 304 2018-01-23T18:32:04.056Z,1516732324.056 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:32:04.069Z,1516732324.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:32:04.069Z,1516732324.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:32:04.472Z,1516732324.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:32:04.472Z,1516732324.472 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 304 2018-01-23T18:32:04.473Z,1516732324.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:32:04.473Z,1516732324.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 304 2018-01-23T18:32:04.863Z,1516732324.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:32:04.864Z,1516732324.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:32:04.864Z,1516732324.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:32:04.865Z,1516732324.865 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:32:04.865Z,1516732324.865 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:32:04.865Z,1516732324.865 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:32:05.233Z,1516732325.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:32:05.233Z,1516732325.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:05.636Z,1516732325.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:32:05.637Z,1516732325.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:06.044Z,1516732326.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:32:06.045Z,1516732326.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:06.439Z,1516732326.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:32:06.440Z,1516732326.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:06.854Z,1516732326.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:32:06.871Z,1516732326.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:07.255Z,1516732327.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:32:07.256Z,1516732327.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:07.644Z,1516732327.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:32:07.645Z,1516732327.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:08.037Z,1516732328.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:32:08.038Z,1516732328.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:08.448Z,1516732328.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:32:08.449Z,1516732328.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:08.846Z,1516732328.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:32:08.851Z,1516732328.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:09.247Z,1516732329.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:32:09.248Z,1516732329.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:09.651Z,1516732329.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:32:09.652Z,1516732329.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:10.041Z,1516732330.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:32:10.042Z,1516732330.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:10.430Z,1516732330.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:32:10.431Z,1516732330.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:10.861Z,1516732330.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:32:10.862Z,1516732330.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:11.257Z,1516732331.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:32:11.258Z,1516732331.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:11.662Z,1516732331.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:32:11.664Z,1516732331.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:12.040Z,1516732332.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:32:12.041Z,1516732332.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:12.439Z,1516732332.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:32:12.440Z,1516732332.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:12.844Z,1516732332.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:32:12.845Z,1516732332.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:13.246Z,1516732333.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:32:13.247Z,1516732333.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:13.643Z,1516732333.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:32:13.644Z,1516732333.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:14.048Z,1516732334.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:32:14.049Z,1516732334.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:14.448Z,1516732334.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:32:14.449Z,1516732334.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:14.857Z,1516732334.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:32:14.858Z,1516732334.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:15.249Z,1516732335.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:32:15.249Z,1516732335.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:15.682Z,1516732335.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:32:15.695Z,1516732335.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:16.036Z,1516732336.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:32:16.037Z,1516732336.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:16.443Z,1516732336.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:32:16.444Z,1516732336.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:16.842Z,1516732336.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:32:16.843Z,1516732336.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:17.267Z,1516732337.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:32:17.268Z,1516732337.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:17.641Z,1516732337.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:32:17.642Z,1516732337.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:18.038Z,1516732338.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:32:18.043Z,1516732338.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:18.441Z,1516732338.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:32:18.442Z,1516732338.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:18.847Z,1516732338.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:32:18.848Z,1516732338.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:19.252Z,1516732339.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:32:19.253Z,1516732339.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:19.646Z,1516732339.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:32:19.652Z,1516732339.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:20.046Z,1516732340.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:32:20.047Z,1516732340.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:20.448Z,1516732340.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:32:20.449Z,1516732340.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:20.845Z,1516732340.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:32:20.846Z,1516732340.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:21.250Z,1516732341.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:32:21.251Z,1516732341.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:21.664Z,1516732341.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:32:21.665Z,1516732341.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:22.045Z,1516732342.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:32:22.046Z,1516732342.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:22.443Z,1516732342.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:32:22.444Z,1516732342.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:22.859Z,1516732342.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:32:22.860Z,1516732342.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:23.264Z,1516732343.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:32:23.265Z,1516732343.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:23.656Z,1516732343.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:32:23.657Z,1516732343.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:24.052Z,1516732344.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:32:24.052Z,1516732344.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:24.430Z,1516732344.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:24.873Z,1516732344.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:25.260Z,1516732345.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:25.651Z,1516732345.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:26.055Z,1516732346.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:26.457Z,1516732346.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:26.857Z,1516732346.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:27.259Z,1516732347.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:27.657Z,1516732347.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:30.727Z,1516732350.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:30.859Z,1516732350.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:31.237Z,1516732351.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:31.630Z,1516732351.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:32.018Z,1516732352.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:32.413Z,1516732352.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:32.817Z,1516732352.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:33.216Z,1516732353.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:33.619Z,1516732353.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:34.024Z,1516732354.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:34.422Z,1516732354.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:34.826Z,1516732354.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:35.221Z,1516732355.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:35.597Z,1516732355.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:36.021Z,1516732356.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:36.400Z,1516732356.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:36.797Z,1516732356.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:37.236Z,1516732357.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:37.635Z,1516732357.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:38.030Z,1516732358.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:38.404Z,1516732358.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:38.811Z,1516732358.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:39.209Z,1516732359.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:39.609Z,1516732359.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:40.018Z,1516732360.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:40.421Z,1516732360.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:40.832Z,1516732360.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:41.227Z,1516732361.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:41.625Z,1516732361.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:42.025Z,1516732362.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:42.428Z,1516732362.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:42.805Z,1516732362.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:43.227Z,1516732363.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:43.635Z,1516732363.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:44.010Z,1516732364.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:44.404Z,1516732364.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:44.805Z,1516732364.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:45.208Z,1516732365.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:45.616Z,1516732365.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:46.011Z,1516732366.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:46.414Z,1516732366.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:46.810Z,1516732366.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:47.211Z,1516732367.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:47.607Z,1516732367.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:48.016Z,1516732368.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:48.420Z,1516732368.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:48.805Z,1516732368.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:49.225Z,1516732369.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:49.622Z,1516732369.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:50.022Z,1516732370.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:50.410Z,1516732370.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:50.821Z,1516732370.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:51.214Z,1516732371.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:51.617Z,1516732371.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:52.025Z,1516732372.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:52.431Z,1516732372.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:52.819Z,1516732372.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:53.217Z,1516732373.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:53.620Z,1516732373.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:54.021Z,1516732374.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:54.422Z,1516732374.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:54.819Z,1516732374.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:55.229Z,1516732375.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:55.624Z,1516732375.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:56.020Z,1516732376.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:56.418Z,1516732376.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:56.812Z,1516732376.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:57.201Z,1516732377.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:57.625Z,1516732377.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:58.032Z,1516732378.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:58.435Z,1516732378.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:58.833Z,1516732378.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:59.209Z,1516732379.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:32:59.614Z,1516732379.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:00.021Z,1516732380.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:00.413Z,1516732380.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:00.809Z,1516732380.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:01.213Z,1516732381.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:01.613Z,1516732381.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:02.017Z,1516732382.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:02.412Z,1516732382.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:02.808Z,1516732382.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:03.215Z,1516732383.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:03.613Z,1516732383.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:04.017Z,1516732384.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:04.421Z,1516732384.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:04.817Z,1516732384.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:05.217Z,1516732385.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:05.607Z,1516732385.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:06.010Z,1516732386.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:06.412Z,1516732386.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:06.821Z,1516732386.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:07.218Z,1516732387.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:07.628Z,1516732387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:08.021Z,1516732388.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:08.415Z,1516732388.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:08.810Z,1516732388.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:09.210Z,1516732389.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:09.618Z,1516732389.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:10.018Z,1516732390.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:10.422Z,1516732390.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:10.819Z,1516732390.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:11.217Z,1516732391.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:11.621Z,1516732391.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:12.015Z,1516732392.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:12.419Z,1516732392.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:12.817Z,1516732392.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:13.218Z,1516732393.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:13.625Z,1516732393.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:14.021Z,1516732394.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:14.415Z,1516732394.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:14.816Z,1516732394.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:15.212Z,1516732395.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:15.615Z,1516732395.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:16.019Z,1516732396.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:16.422Z,1516732396.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:16.818Z,1516732396.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:17.219Z,1516732397.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:17.617Z,1516732397.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:18.015Z,1516732398.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:18.417Z,1516732398.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:18.815Z,1516732398.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:19.227Z,1516732399.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:22.305Z,1516732402.305 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:22.322Z,1516732402.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:22.444Z,1516732402.444 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:22.485Z,1516732402.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:22.774Z,1516732402.774 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:22.789Z,1516732402.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:23.173Z,1516732403.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:23.192Z,1516732403.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:23.570Z,1516732403.570 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:23.593Z,1516732403.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:23.975Z,1516732403.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:23.991Z,1516732403.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:24.379Z,1516732404.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:24.419Z,1516732404.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:24.787Z,1516732404.787 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:24.819Z,1516732404.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:25.172Z,1516732405.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:25.187Z,1516732405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:25.573Z,1516732405.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:25.588Z,1516732405.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:25.968Z,1516732405.968 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:25.996Z,1516732405.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:26.378Z,1516732406.378 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:26.397Z,1516732406.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:26.778Z,1516732406.778 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:26.793Z,1516732406.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:27.178Z,1516732407.178 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:27.194Z,1516732407.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:27.580Z,1516732407.580 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:27.595Z,1516732407.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:27.979Z,1516732407.979 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:27.994Z,1516732407.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:28.373Z,1516732408.373 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:28.393Z,1516732408.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:28.772Z,1516732408.772 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:28.788Z,1516732408.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:29.174Z,1516732409.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:29.189Z,1516732409.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:29.576Z,1516732409.576 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:29.591Z,1516732409.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:29.976Z,1516732409.976 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:33:29.997Z,1516732409.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:30.397Z,1516732410.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:30.794Z,1516732410.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:31.197Z,1516732411.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:31.593Z,1516732411.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:31.992Z,1516732411.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:32.388Z,1516732412.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:32.789Z,1516732412.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:33.201Z,1516732413.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:33.598Z,1516732413.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:34.005Z,1516732414.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:34.388Z,1516732414.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:34.797Z,1516732414.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:35.192Z,1516732415.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:35.597Z,1516732415.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:36.003Z,1516732416.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:36.404Z,1516732416.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:36.801Z,1516732416.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:37.197Z,1516732417.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:37.602Z,1516732417.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:37.997Z,1516732417.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:38.396Z,1516732418.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:38.790Z,1516732418.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:39.200Z,1516732419.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:39.602Z,1516732419.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:40.010Z,1516732420.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:40.395Z,1516732420.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:40.795Z,1516732420.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:41.201Z,1516732421.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:41.601Z,1516732421.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:41.000Z,1516732422.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:42.405Z,1516732422.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:42.809Z,1516732422.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:43.197Z,1516732423.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:43.591Z,1516732423.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:43.989Z,1516732423.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:44.393Z,1516732424.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:44.801Z,1516732424.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:45.198Z,1516732425.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:45.601Z,1516732425.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:45.999Z,1516732425.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:46.385Z,1516732426.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:46.799Z,1516732426.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:47.200Z,1516732427.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:47.599Z,1516732427.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:48.008Z,1516732428.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:48.406Z,1516732428.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:48.807Z,1516732428.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:49.199Z,1516732429.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:49.602Z,1516732429.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:50.007Z,1516732430.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:50.417Z,1516732430.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:50.802Z,1516732430.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:51.199Z,1516732431.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:51.599Z,1516732431.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:52.016Z,1516732432.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:52.405Z,1516732432.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:52.801Z,1516732432.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:53.209Z,1516732433.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:53.603Z,1516732433.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:54.001Z,1516732434.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:54.405Z,1516732434.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:54.807Z,1516732434.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:55.205Z,1516732435.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:55.608Z,1516732435.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:56.006Z,1516732436.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:56.417Z,1516732436.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:56.809Z,1516732436.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:57.208Z,1516732437.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:57.609Z,1516732437.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:58.017Z,1516732438.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:58.394Z,1516732438.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:58.818Z,1516732438.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:59.195Z,1516732439.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:33:59.587Z,1516732439.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:00.020Z,1516732440.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:00.398Z,1516732440.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:00.790Z,1516732440.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:01.197Z,1516732441.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:01.588Z,1516732441.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:01.993Z,1516732441.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:02.394Z,1516732442.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:02.793Z,1516732442.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:03.190Z,1516732443.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:03.588Z,1516732443.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:03.994Z,1516732443.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:04.401Z,1516732444.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:04.795Z,1516732444.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:05.174Z,1516732445.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:05.189Z,1516732445.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:05.572Z,1516732445.572 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:05.588Z,1516732445.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:05.978Z,1516732445.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:05.994Z,1516732445.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:06.379Z,1516732446.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:06.397Z,1516732446.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:06.777Z,1516732446.777 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:06.797Z,1516732446.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:07.172Z,1516732447.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:07.190Z,1516732447.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:07.573Z,1516732447.573 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:07.588Z,1516732447.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:07.978Z,1516732447.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:07.993Z,1516732447.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:08.379Z,1516732448.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:08.394Z,1516732448.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:08.779Z,1516732448.779 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:08.794Z,1516732448.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:09.172Z,1516732449.172 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:09.191Z,1516732449.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:09.571Z,1516732449.571 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:09.586Z,1516732449.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:09.991Z,1516732449.991 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:10.006Z,1516732450.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:10.376Z,1516732450.376 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:10.404Z,1516732450.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:10.782Z,1516732450.782 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:10.801Z,1516732450.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:11.174Z,1516732451.174 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:11.189Z,1516732451.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:11.575Z,1516732451.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:11.590Z,1516732451.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:11.978Z,1516732451.978 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:12.005Z,1516732452.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:12.387Z,1516732452.387 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:12.402Z,1516732452.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:12.788Z,1516732452.788 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:12.803Z,1516732452.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:13.173Z,1516732453.173 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:13.194Z,1516732453.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:13.575Z,1516732453.575 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:13.590Z,1516732453.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:13.981Z,1516732453.981 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:14.012Z,1516732454.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:14.389Z,1516732454.389 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:14.404Z,1516732454.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:14.783Z,1516732454.783 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:14.809Z,1516732454.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:15.165Z,1516732455.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:15.201Z,1516732455.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:15.568Z,1516732455.568 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:15.596Z,1516732455.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:15.986Z,1516732455.986 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:16.001Z,1516732456.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:16.379Z,1516732456.379 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:16.409Z,1516732456.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:16.775Z,1516732456.775 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:16.812Z,1516732456.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:17.165Z,1516732457.165 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:17.205Z,1516732457.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:17.567Z,1516732457.567 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:17.608Z,1516732457.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:17.975Z,1516732457.975 [DAT](DEBUG): LCB error: Software Overcurrent. 2018-01-23T18:34:18.002Z,1516732458.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:18.407Z,1516732458.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:18.409Z,1516732458.409 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:34:18.409Z,1516732458.409 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:34:18.410Z,1516732458.410 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:34:18.410Z,1516732458.410 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:34:18.800Z,1516732458.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:18.803Z,1516732458.803 [Default:CheckIn:D] Stopped 2018-01-23T18:34:18.803Z,1516732458.803 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:34:19.205Z,1516732459.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:19.213Z,1516732459.213 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 916.445703 min 2018-01-23T18:34:19.213Z,1516732459.213 [Default:CheckIn:E] Stopped 2018-01-23T18:34:19.213Z,1516732459.213 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn] Stopped 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn](INFO): Running loop #90 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn] Running Loop=90 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:34:19.214Z,1516732459.214 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:34:19.584Z,1516732459.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:22.709Z,1516732462.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:22.857Z,1516732462.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:23.189Z,1516732463.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:23.582Z,1516732463.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:23.975Z,1516732463.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:24.377Z,1516732464.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:24.775Z,1516732464.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:25.186Z,1516732465.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:25.586Z,1516732465.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:25.985Z,1516732465.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:26.374Z,1516732466.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:26.776Z,1516732466.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:27.180Z,1516732467.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:27.577Z,1516732467.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:27.975Z,1516732467.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:28.385Z,1516732468.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:28.793Z,1516732468.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:29.185Z,1516732469.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:29.576Z,1516732469.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:29.977Z,1516732469.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:30.377Z,1516732470.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:30.777Z,1516732470.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:31.185Z,1516732471.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:31.593Z,1516732471.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:31.997Z,1516732471.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:32.377Z,1516732472.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:32.777Z,1516732472.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:33.180Z,1516732473.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:33.587Z,1516732473.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:33.977Z,1516732473.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:34.386Z,1516732474.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:34.785Z,1516732474.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:35.185Z,1516732475.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:35.583Z,1516732475.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:35.977Z,1516732475.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:35.990Z,1516732475.990 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:34:36.377Z,1516732476.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:36.780Z,1516732476.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:37.185Z,1516732477.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:37.597Z,1516732477.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:37.990Z,1516732477.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:38.375Z,1516732478.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:38.788Z,1516732478.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:39.180Z,1516732479.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:39.581Z,1516732479.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:39.984Z,1516732479.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:40.390Z,1516732480.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:40.785Z,1516732480.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:41.185Z,1516732481.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:41.577Z,1516732481.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:41.978Z,1516732481.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:42.388Z,1516732482.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:42.780Z,1516732482.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:43.186Z,1516732483.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:43.590Z,1516732483.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:43.987Z,1516732483.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:44.377Z,1516732484.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:44.777Z,1516732484.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:45.185Z,1516732485.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:45.578Z,1516732485.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:45.980Z,1516732485.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:46.387Z,1516732486.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:46.785Z,1516732486.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:47.185Z,1516732487.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:47.577Z,1516732487.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:47.981Z,1516732487.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:48.383Z,1516732488.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:48.784Z,1516732488.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:49.193Z,1516732489.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:49.590Z,1516732489.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:49.991Z,1516732489.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:50.386Z,1516732490.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:50.784Z,1516732490.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:50.786Z,1516732490.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:50.786Z,1516732490.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 305 2018-01-23T18:34:50.786Z,1516732490.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:34:50.799Z,1516732490.799 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:34:51.190Z,1516732491.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:51.202Z,1516732491.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:34:51.202Z,1516732491.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 305 2018-01-23T18:34:51.583Z,1516732491.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:51.584Z,1516732491.584 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:34:51.585Z,1516732491.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:34:51.585Z,1516732491.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:34:51.985Z,1516732491.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:52.392Z,1516732492.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:52.801Z,1516732492.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:53.191Z,1516732493.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:53.587Z,1516732493.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:53.977Z,1516732493.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:54.384Z,1516732494.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:54.783Z,1516732494.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:55.190Z,1516732495.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:55.605Z,1516732495.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:55.992Z,1516732495.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:56.389Z,1516732496.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:56.773Z,1516732496.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:57.175Z,1516732497.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:57.577Z,1516732497.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:57.985Z,1516732497.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:58.378Z,1516732498.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:58.782Z,1516732498.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:59.178Z,1516732499.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:59.575Z,1516732499.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:34:59.976Z,1516732499.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:00.376Z,1516732500.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:00.774Z,1516732500.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:01.178Z,1516732501.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:01.582Z,1516732501.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:01.990Z,1516732501.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:02.373Z,1516732502.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:02.776Z,1516732502.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:03.180Z,1516732503.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:03.574Z,1516732503.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:03.981Z,1516732503.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:04.378Z,1516732504.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:04.778Z,1516732504.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:05.178Z,1516732505.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:05.178Z,1516732505.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 305 2018-01-23T18:35:05.178Z,1516732505.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:35:05.180Z,1516732505.180 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:05.180Z,1516732505.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 305 2018-01-23T18:35:05.180Z,1516732505.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:35:05.209Z,1516732505.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:35:05.209Z,1516732505.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:35:05.586Z,1516732505.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:35:05.586Z,1516732505.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 305 2018-01-23T18:35:05.587Z,1516732505.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:35:05.587Z,1516732505.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 305 2018-01-23T18:35:05.984Z,1516732505.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:35:05.984Z,1516732505.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:35:05.985Z,1516732505.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:35:05.985Z,1516732505.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:35:05.986Z,1516732505.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:35:05.986Z,1516732505.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:35:06.377Z,1516732506.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:35:06.377Z,1516732506.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:06.775Z,1516732506.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:35:06.776Z,1516732506.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:07.189Z,1516732507.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:35:07.189Z,1516732507.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:07.588Z,1516732507.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:35:07.589Z,1516732507.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:07.985Z,1516732507.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:35:07.985Z,1516732507.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:08.374Z,1516732508.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:35:08.375Z,1516732508.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:08.784Z,1516732508.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:35:08.785Z,1516732508.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:09.175Z,1516732509.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:35:09.176Z,1516732509.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:09.575Z,1516732509.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:35:09.576Z,1516732509.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:09.977Z,1516732509.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:35:09.978Z,1516732509.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:10.387Z,1516732510.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:35:10.388Z,1516732510.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:10.796Z,1516732510.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:35:10.797Z,1516732510.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:11.192Z,1516732511.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:35:11.193Z,1516732511.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:11.584Z,1516732511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:35:11.584Z,1516732511.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:11.981Z,1516732511.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:35:11.982Z,1516732511.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:12.379Z,1516732512.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:35:12.380Z,1516732512.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:12.787Z,1516732512.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:35:12.788Z,1516732512.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:13.190Z,1516732513.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:35:13.195Z,1516732513.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:13.589Z,1516732513.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:35:13.590Z,1516732513.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:14.006Z,1516732514.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:35:14.007Z,1516732514.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:14.373Z,1516732514.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:35:14.374Z,1516732514.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:14.786Z,1516732514.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:35:14.788Z,1516732514.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:15.189Z,1516732515.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:35:15.190Z,1516732515.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:15.584Z,1516732515.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:35:15.585Z,1516732515.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:15.990Z,1516732515.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:35:15.991Z,1516732515.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:16.392Z,1516732516.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:35:16.393Z,1516732516.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:16.788Z,1516732516.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:35:16.789Z,1516732516.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:17.193Z,1516732517.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:35:17.194Z,1516732517.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:17.592Z,1516732517.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:35:17.593Z,1516732517.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:17.976Z,1516732517.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:35:17.977Z,1516732517.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:18.384Z,1516732518.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:35:18.385Z,1516732518.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:18.777Z,1516732518.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:35:18.778Z,1516732518.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:19.204Z,1516732519.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:35:19.205Z,1516732519.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:19.591Z,1516732519.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:35:19.592Z,1516732519.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:19.991Z,1516732519.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:35:19.992Z,1516732519.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:23.078Z,1516732523.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T18:35:23.079Z,1516732523.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:23.200Z,1516732523.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:35:23.201Z,1516732523.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:23.562Z,1516732523.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:35:23.583Z,1516732523.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:23.953Z,1516732523.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:35:23.954Z,1516732523.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:24.364Z,1516732524.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:35:24.365Z,1516732524.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:24.746Z,1516732524.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:35:24.747Z,1516732524.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:25.152Z,1516732525.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:35:25.153Z,1516732525.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:25.548Z,1516732525.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:25.949Z,1516732525.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:26.368Z,1516732526.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:26.761Z,1516732526.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:27.173Z,1516732527.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:27.556Z,1516732527.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:27.954Z,1516732527.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:28.354Z,1516732528.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:28.762Z,1516732528.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:29.170Z,1516732529.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:29.569Z,1516732529.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:29.974Z,1516732529.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:30.353Z,1516732530.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:30.766Z,1516732530.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:31.153Z,1516732531.153 [PNI_TCM](ERROR): CRC does not match. Expected:0x10259 got:0x26101 2018-01-23T18:35:31.173Z,1516732531.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:31.569Z,1516732531.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:31.962Z,1516732531.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:32.360Z,1516732532.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:32.756Z,1516732532.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:33.165Z,1516732533.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:33.567Z,1516732533.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:33.961Z,1516732533.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:34.350Z,1516732534.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:34.754Z,1516732534.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:35.160Z,1516732535.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:35.565Z,1516732535.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:35.969Z,1516732535.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:36.350Z,1516732536.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:36.774Z,1516732536.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:37.165Z,1516732537.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:37.558Z,1516732537.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:37.968Z,1516732537.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:38.365Z,1516732538.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:38.764Z,1516732538.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:39.164Z,1516732539.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:39.572Z,1516732539.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:39.964Z,1516732539.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:40.365Z,1516732540.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:40.755Z,1516732540.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.378748 seconds old. 2018-01-23T18:35:40.756Z,1516732540.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:40.757Z,1516732540.757 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.391219 seconds old. 2018-01-23T18:35:40.758Z,1516732540.758 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.391581 seconds old. 2018-01-23T18:35:41.163Z,1516732541.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.799455 seconds old. 2018-01-23T18:35:41.164Z,1516732541.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:41.165Z,1516732541.165 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.799776 seconds old. 2018-01-23T18:35:41.166Z,1516732541.166 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.800119 seconds old. 2018-01-23T18:35:41.564Z,1516732541.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.200117 seconds old. 2018-01-23T18:35:41.565Z,1516732541.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:41.566Z,1516732541.566 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.200444 seconds old. 2018-01-23T18:35:41.567Z,1516732541.567 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.200988 seconds old. 2018-01-23T18:35:41.975Z,1516732541.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.611154 seconds old. 2018-01-23T18:35:41.976Z,1516732541.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:41.977Z,1516732541.977 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.611492 seconds old. 2018-01-23T18:35:41.978Z,1516732541.978 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.611832 seconds old. 2018-01-23T18:35:42.346Z,1516732542.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.982334 seconds old. 2018-01-23T18:35:42.368Z,1516732542.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:42.368Z,1516732542.368 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.002968 seconds old. 2018-01-23T18:35:42.369Z,1516732542.369 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.003333 seconds old. 2018-01-23T18:35:42.744Z,1516732542.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.380338 seconds old. 2018-01-23T18:35:42.745Z,1516732542.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:42.746Z,1516732542.746 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.380667 seconds old. 2018-01-23T18:35:42.747Z,1516732542.747 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.381206 seconds old. 2018-01-23T18:35:43.175Z,1516732543.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.810879 seconds old. 2018-01-23T18:35:43.176Z,1516732543.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:43.177Z,1516732543.177 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.811224 seconds old. 2018-01-23T18:35:43.178Z,1516732543.178 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.811564 seconds old. 2018-01-23T18:35:43.571Z,1516732543.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.207410 seconds old. 2018-01-23T18:35:43.572Z,1516732543.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:43.573Z,1516732543.573 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.207762 seconds old. 2018-01-23T18:35:43.574Z,1516732543.574 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.208101 seconds old. 2018-01-23T18:35:43.972Z,1516732543.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.607994 seconds old. 2018-01-23T18:35:43.973Z,1516732543.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:43.974Z,1516732543.974 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.608337 seconds old. 2018-01-23T18:35:43.975Z,1516732543.975 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.608874 seconds old. 2018-01-23T18:35:44.345Z,1516732544.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.981285 seconds old. 2018-01-23T18:35:44.346Z,1516732544.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:44.347Z,1516732544.347 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.981678 seconds old. 2018-01-23T18:35:44.348Z,1516732544.348 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.982024 seconds old. 2018-01-23T18:35:44.740Z,1516732544.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.376383 seconds old. 2018-01-23T18:35:44.741Z,1516732544.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:44.742Z,1516732544.742 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.376713 seconds old. 2018-01-23T18:35:44.743Z,1516732544.743 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.377281 seconds old. 2018-01-23T18:35:45.171Z,1516732545.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.807467 seconds old. 2018-01-23T18:35:45.172Z,1516732545.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:45.173Z,1516732545.173 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.807808 seconds old. 2018-01-23T18:35:45.174Z,1516732545.174 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.808144 seconds old. 2018-01-23T18:35:45.569Z,1516732545.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:45.975Z,1516732545.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:46.346Z,1516732546.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:46.761Z,1516732546.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:47.157Z,1516732547.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:47.557Z,1516732547.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:47.952Z,1516732547.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:48.376Z,1516732548.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:48.754Z,1516732548.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:49.160Z,1516732549.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:49.561Z,1516732549.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:49.977Z,1516732549.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:50.348Z,1516732550.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:50.747Z,1516732550.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:51.161Z,1516732551.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:51.583Z,1516732551.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:51.957Z,1516732551.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:52.352Z,1516732552.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:52.753Z,1516732552.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:53.170Z,1516732553.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:53.565Z,1516732553.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:53.966Z,1516732553.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:54.349Z,1516732554.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:54.753Z,1516732554.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:55.162Z,1516732555.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:55.573Z,1516732555.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:55.963Z,1516732555.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:56.369Z,1516732556.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:56.736Z,1516732556.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:57.165Z,1516732557.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:57.581Z,1516732557.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:57.985Z,1516732557.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:58.345Z,1516732558.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:58.767Z,1516732558.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:59.167Z,1516732559.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:59.579Z,1516732559.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:35:59.948Z,1516732559.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:00.343Z,1516732560.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:00.746Z,1516732560.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:01.147Z,1516732561.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:01.550Z,1516732561.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:01.980Z,1516732561.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:02.355Z,1516732562.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:02.745Z,1516732562.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:03.155Z,1516732563.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:03.580Z,1516732563.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:03.957Z,1516732563.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:04.353Z,1516732564.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:04.745Z,1516732564.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:05.160Z,1516732565.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:05.562Z,1516732565.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:05.965Z,1516732565.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:06.352Z,1516732566.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:06.753Z,1516732566.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:07.152Z,1516732567.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:07.561Z,1516732567.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:07.970Z,1516732567.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:08.357Z,1516732568.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:08.753Z,1516732568.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:09.153Z,1516732569.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:09.557Z,1516732569.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:09.952Z,1516732569.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:10.365Z,1516732570.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:10.759Z,1516732570.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:11.165Z,1516732571.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:11.549Z,1516732571.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:11.947Z,1516732571.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:12.345Z,1516732572.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:12.751Z,1516732572.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:13.156Z,1516732573.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:13.564Z,1516732573.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:13.958Z,1516732573.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:14.360Z,1516732574.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:14.745Z,1516732574.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:15.145Z,1516732575.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:15.556Z,1516732575.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:15.949Z,1516732575.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:16.355Z,1516732576.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:16.758Z,1516732576.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:17.154Z,1516732577.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:17.551Z,1516732577.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:17.955Z,1516732577.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:18.345Z,1516732578.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:18.751Z,1516732578.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:19.156Z,1516732579.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:19.554Z,1516732579.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:19.958Z,1516732579.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:20.355Z,1516732580.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:20.757Z,1516732580.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:21.149Z,1516732581.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:21.549Z,1516732581.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:21.949Z,1516732581.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:22.356Z,1516732582.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:22.758Z,1516732582.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:23.154Z,1516732583.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:23.557Z,1516732583.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:23.947Z,1516732583.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:24.345Z,1516732584.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:24.753Z,1516732584.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:25.151Z,1516732585.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:25.558Z,1516732585.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:25.959Z,1516732585.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:26.360Z,1516732586.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:26.750Z,1516732586.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:27.151Z,1516732587.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:27.557Z,1516732587.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:27.953Z,1516732587.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:28.365Z,1516732588.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:28.762Z,1516732588.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:29.156Z,1516732589.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:32.261Z,1516732592.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:32.381Z,1516732592.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:32.730Z,1516732592.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:33.155Z,1516732593.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:33.557Z,1516732593.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:33.929Z,1516732593.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:34.329Z,1516732594.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:34.733Z,1516732594.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:35.129Z,1516732595.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:35.531Z,1516732595.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:35.937Z,1516732595.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:36.359Z,1516732596.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:36.733Z,1516732596.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:37.128Z,1516732597.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:37.537Z,1516732597.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:37.928Z,1516732597.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:38.333Z,1516732598.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:38.741Z,1516732598.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:39.140Z,1516732599.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:39.576Z,1516732599.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:39.938Z,1516732599.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:40.343Z,1516732600.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:40.737Z,1516732600.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:41.146Z,1516732601.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:41.565Z,1516732601.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:41.957Z,1516732601.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:42.363Z,1516732602.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:42.756Z,1516732602.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:43.162Z,1516732603.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:43.561Z,1516732603.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:43.934Z,1516732603.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:44.349Z,1516732604.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:44.752Z,1516732604.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:45.182Z,1516732605.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:45.538Z,1516732605.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:45.952Z,1516732605.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:46.358Z,1516732606.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:46.750Z,1516732606.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:47.194Z,1516732607.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:47.596Z,1516732607.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:47.969Z,1516732607.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:48.384Z,1516732608.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:48.783Z,1516732608.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:49.158Z,1516732609.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:49.581Z,1516732609.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:49.975Z,1516732609.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:50.345Z,1516732610.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:50.757Z,1516732610.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:51.187Z,1516732611.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:51.553Z,1516732611.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:51.952Z,1516732611.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:52.357Z,1516732612.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:52.758Z,1516732612.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:53.153Z,1516732613.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:53.598Z,1516732613.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:53.967Z,1516732613.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:54.365Z,1516732614.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:54.776Z,1516732614.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:55.132Z,1516732615.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:55.547Z,1516732615.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:55.971Z,1516732615.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:56.345Z,1516732616.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:56.757Z,1516732616.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:57.186Z,1516732617.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:57.552Z,1516732617.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:57.966Z,1516732617.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:58.351Z,1516732618.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:58.769Z,1516732618.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:59.145Z,1516732619.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:59.571Z,1516732619.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:36:59.949Z,1516732619.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:00.356Z,1516732620.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:00.731Z,1516732620.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:01.135Z,1516732621.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:01.540Z,1516732621.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:01.931Z,1516732621.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:02.341Z,1516732622.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:02.749Z,1516732622.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:03.142Z,1516732623.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:03.533Z,1516732623.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:03.936Z,1516732623.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:04.337Z,1516732624.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:04.734Z,1516732624.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:05.133Z,1516732625.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:05.547Z,1516732625.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:05.946Z,1516732625.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:06.338Z,1516732626.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:06.736Z,1516732626.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:07.135Z,1516732627.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:07.535Z,1516732627.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:07.932Z,1516732627.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:08.344Z,1516732628.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:08.746Z,1516732628.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:09.143Z,1516732629.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:09.539Z,1516732629.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:09.937Z,1516732629.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:10.340Z,1516732630.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:10.721Z,1516732630.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:11.124Z,1516732631.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:11.561Z,1516732631.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:11.951Z,1516732631.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:12.350Z,1516732632.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:12.753Z,1516732632.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:13.126Z,1516732633.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:13.527Z,1516732633.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:13.928Z,1516732633.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:14.331Z,1516732634.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:14.735Z,1516732634.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:15.131Z,1516732635.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:15.526Z,1516732635.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:15.926Z,1516732635.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:16.335Z,1516732636.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:16.728Z,1516732636.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:17.126Z,1516732637.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:17.556Z,1516732637.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:17.938Z,1516732637.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:18.363Z,1516732638.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:18.730Z,1516732638.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:19.130Z,1516732639.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:19.532Z,1516732639.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:19.936Z,1516732639.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:20.339Z,1516732640.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:20.741Z,1516732640.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:23.867Z,1516732643.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:24.012Z,1516732644.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:24.332Z,1516732644.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:24.738Z,1516732644.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:25.131Z,1516732645.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:25.542Z,1516732645.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:25.938Z,1516732645.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:26.341Z,1516732646.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:26.731Z,1516732646.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:27.132Z,1516732647.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:27.533Z,1516732647.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:27.936Z,1516732647.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:28.337Z,1516732648.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:28.742Z,1516732648.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:29.138Z,1516732649.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:29.532Z,1516732649.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:29.934Z,1516732649.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:30.341Z,1516732650.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:30.737Z,1516732650.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:31.141Z,1516732651.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:31.541Z,1516732651.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:31.941Z,1516732651.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:32.341Z,1516732652.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:32.730Z,1516732652.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:33.131Z,1516732653.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:33.533Z,1516732653.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:33.930Z,1516732653.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:34.341Z,1516732654.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:34.741Z,1516732654.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:35.141Z,1516732655.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:35.532Z,1516732655.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:35.930Z,1516732655.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:36.349Z,1516732656.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:36.745Z,1516732656.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:37.145Z,1516732657.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:37.540Z,1516732657.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:37.940Z,1516732657.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:38.342Z,1516732658.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:38.745Z,1516732658.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:39.148Z,1516732659.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:39.536Z,1516732659.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:39.933Z,1516732659.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:40.343Z,1516732660.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:40.749Z,1516732660.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:41.145Z,1516732661.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:41.537Z,1516732661.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:41.935Z,1516732661.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:42.341Z,1516732662.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:42.746Z,1516732662.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:43.141Z,1516732663.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:43.533Z,1516732663.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:43.941Z,1516732663.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:44.341Z,1516732664.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:44.749Z,1516732664.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:45.152Z,1516732665.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:45.534Z,1516732665.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:45.932Z,1516732665.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:46.343Z,1516732666.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:46.745Z,1516732666.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:47.149Z,1516732667.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:47.533Z,1516732667.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:47.937Z,1516732667.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:48.342Z,1516732668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:48.746Z,1516732668.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:49.153Z,1516732669.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:49.537Z,1516732669.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:49.933Z,1516732669.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:50.345Z,1516732670.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:50.745Z,1516732670.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:51.148Z,1516732671.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:51.602Z,1516732671.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:51.637Z,1516732671.637 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:51.637Z,1516732671.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 306 2018-01-23T18:37:51.637Z,1516732671.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:37:51.679Z,1516732671.679 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:37:51.933Z,1516732671.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:51.945Z,1516732671.945 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:37:51.945Z,1516732671.945 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 306 2018-01-23T18:37:52.344Z,1516732672.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:52.345Z,1516732672.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:37:52.345Z,1516732672.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:37:52.346Z,1516732672.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:37:52.747Z,1516732672.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:53.142Z,1516732673.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:53.533Z,1516732673.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:53.933Z,1516732673.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:54.342Z,1516732674.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:54.746Z,1516732674.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:55.153Z,1516732675.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:55.532Z,1516732675.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:55.937Z,1516732675.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:56.353Z,1516732676.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:56.745Z,1516732676.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:57.144Z,1516732677.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:57.535Z,1516732677.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:57.940Z,1516732677.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:58.345Z,1516732678.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:58.753Z,1516732678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:59.145Z,1516732679.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:59.544Z,1516732679.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:37:59.933Z,1516732679.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:00.346Z,1516732680.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:00.752Z,1516732680.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:01.146Z,1516732681.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:01.546Z,1516732681.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:01.943Z,1516732681.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:02.345Z,1516732682.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:02.749Z,1516732682.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:03.157Z,1516732683.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:03.536Z,1516732683.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:03.945Z,1516732683.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:04.354Z,1516732684.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:04.749Z,1516732684.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:05.145Z,1516732685.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:05.553Z,1516732685.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:05.947Z,1516732685.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:06.345Z,1516732686.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:06.345Z,1516732686.345 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 306 2018-01-23T18:38:06.345Z,1516732686.345 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:38:06.347Z,1516732686.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:06.347Z,1516732686.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 306 2018-01-23T18:38:06.347Z,1516732686.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:38:06.360Z,1516732686.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:38:06.360Z,1516732686.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:38:06.772Z,1516732686.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:38:06.772Z,1516732686.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 306 2018-01-23T18:38:06.772Z,1516732686.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:38:06.772Z,1516732686.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 306 2018-01-23T18:38:07.152Z,1516732687.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:38:07.152Z,1516732687.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:38:07.152Z,1516732687.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:38:07.153Z,1516732687.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:38:07.153Z,1516732687.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:38:07.154Z,1516732687.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:38:07.552Z,1516732687.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:38:07.553Z,1516732687.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:07.931Z,1516732687.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:38:07.931Z,1516732687.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:08.334Z,1516732688.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:38:08.335Z,1516732688.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:08.741Z,1516732688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:38:08.742Z,1516732688.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:09.140Z,1516732689.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:38:09.141Z,1516732689.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:09.533Z,1516732689.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:38:09.533Z,1516732689.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:09.929Z,1516732689.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:38:09.929Z,1516732689.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:10.341Z,1516732690.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:38:10.342Z,1516732690.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:10.744Z,1516732690.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:38:10.745Z,1516732690.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:11.144Z,1516732691.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:38:11.145Z,1516732691.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:11.540Z,1516732691.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:38:11.541Z,1516732691.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:11.936Z,1516732691.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:38:11.936Z,1516732691.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:12.334Z,1516732692.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:38:12.339Z,1516732692.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:12.745Z,1516732692.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:38:12.747Z,1516732692.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:13.141Z,1516732693.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:38:13.141Z,1516732693.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:13.541Z,1516732693.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:38:13.541Z,1516732693.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:13.936Z,1516732693.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:38:13.937Z,1516732693.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:14.331Z,1516732694.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:38:14.332Z,1516732694.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:14.741Z,1516732694.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:38:14.742Z,1516732694.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:15.140Z,1516732695.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:38:15.141Z,1516732695.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:15.541Z,1516732695.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:38:15.542Z,1516732695.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:15.945Z,1516732695.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:38:15.946Z,1516732695.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:16.348Z,1516732696.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:38:16.349Z,1516732696.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:16.734Z,1516732696.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:38:16.735Z,1516732696.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:17.141Z,1516732697.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:38:17.142Z,1516732697.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:17.541Z,1516732697.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:38:17.542Z,1516732697.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:17.940Z,1516732697.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:38:17.941Z,1516732697.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:18.343Z,1516732698.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:38:18.344Z,1516732698.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:18.745Z,1516732698.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:38:18.746Z,1516732698.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:19.156Z,1516732699.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:38:19.157Z,1516732699.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:19.544Z,1516732699.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:38:19.545Z,1516732699.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:19.952Z,1516732699.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:38:19.953Z,1516732699.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:20.321Z,1516732700.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:38:20.322Z,1516732700.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:20.752Z,1516732700.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:38:20.753Z,1516732700.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:23.859Z,1516732703.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T18:38:23.860Z,1516732703.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:23.995Z,1516732703.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T18:38:23.996Z,1516732703.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:24.333Z,1516732704.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:38:24.334Z,1516732704.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:24.757Z,1516732704.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:38:24.758Z,1516732704.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:25.122Z,1516732705.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:38:25.123Z,1516732705.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:25.524Z,1516732705.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:38:25.525Z,1516732705.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:25.933Z,1516732705.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:38:25.934Z,1516732705.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:26.322Z,1516732706.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:38:26.323Z,1516732706.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:26.738Z,1516732706.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:27.134Z,1516732707.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:27.530Z,1516732707.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:27.925Z,1516732707.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:28.324Z,1516732708.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:28.735Z,1516732708.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:29.128Z,1516732709.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:29.536Z,1516732709.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:29.935Z,1516732709.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:30.331Z,1516732710.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:30.724Z,1516732710.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:31.122Z,1516732711.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:31.532Z,1516732711.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:31.927Z,1516732711.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:32.326Z,1516732712.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:32.733Z,1516732712.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:33.134Z,1516732713.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:33.529Z,1516732713.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:33.929Z,1516732713.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:34.325Z,1516732714.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:34.726Z,1516732714.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:35.123Z,1516732715.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:35.530Z,1516732715.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:35.934Z,1516732715.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:36.330Z,1516732716.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:36.725Z,1516732716.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:37.125Z,1516732717.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:37.524Z,1516732717.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:37.926Z,1516732717.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:38.324Z,1516732718.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:38.729Z,1516732718.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:39.130Z,1516732719.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:39.530Z,1516732719.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:39.925Z,1516732719.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:40.325Z,1516732720.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:40.728Z,1516732720.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:41.124Z,1516732721.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:41.536Z,1516732721.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:41.931Z,1516732721.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:42.333Z,1516732722.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:42.732Z,1516732722.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:43.122Z,1516732723.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:43.522Z,1516732723.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:43.929Z,1516732723.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:44.322Z,1516732724.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:44.735Z,1516732724.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:45.133Z,1516732725.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:45.537Z,1516732725.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:45.929Z,1516732725.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:46.324Z,1516732726.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:46.725Z,1516732726.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:47.124Z,1516732727.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:47.540Z,1516732727.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:47.934Z,1516732727.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:48.337Z,1516732728.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:48.728Z,1516732728.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:49.121Z,1516732729.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:49.526Z,1516732729.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:49.932Z,1516732729.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:50.328Z,1516732730.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:50.733Z,1516732730.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:51.137Z,1516732731.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:51.617Z,1516732731.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:51.933Z,1516732731.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:52.332Z,1516732732.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:52.725Z,1516732732.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:53.125Z,1516732733.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:53.534Z,1516732733.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:53.941Z,1516732733.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:54.341Z,1516732734.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:54.728Z,1516732734.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:55.131Z,1516732735.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:55.527Z,1516732735.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:55.929Z,1516732735.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:56.323Z,1516732736.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:56.733Z,1516732736.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:57.144Z,1516732737.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:57.537Z,1516732737.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:57.927Z,1516732737.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:58.324Z,1516732738.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:58.725Z,1516732738.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:59.123Z,1516732739.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:59.529Z,1516732739.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:38:59.933Z,1516732739.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:00.330Z,1516732740.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:00.728Z,1516732740.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:01.123Z,1516732741.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:01.533Z,1516732741.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:01.932Z,1516732741.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:02.322Z,1516732742.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:02.733Z,1516732742.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:03.134Z,1516732743.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:03.530Z,1516732743.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:03.924Z,1516732743.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:04.328Z,1516732744.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:04.726Z,1516732744.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:05.126Z,1516732745.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:05.531Z,1516732745.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:05.930Z,1516732745.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:06.337Z,1516732746.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:06.729Z,1516732746.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:07.127Z,1516732747.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:07.529Z,1516732747.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:07.930Z,1516732747.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:08.324Z,1516732748.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:08.734Z,1516732748.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:09.134Z,1516732749.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:09.537Z,1516732749.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:09.923Z,1516732749.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:10.331Z,1516732750.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:10.726Z,1516732750.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:11.133Z,1516732751.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:11.535Z,1516732751.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:11.937Z,1516732751.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:12.333Z,1516732752.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:12.729Z,1516732752.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:13.125Z,1516732753.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:13.535Z,1516732753.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:13.926Z,1516732753.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:14.334Z,1516732754.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:14.745Z,1516732754.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:15.142Z,1516732755.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:15.535Z,1516732755.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:15.936Z,1516732755.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:16.337Z,1516732756.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:16.733Z,1516732756.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:17.125Z,1516732757.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:17.548Z,1516732757.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:17.938Z,1516732757.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:18.346Z,1516732758.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:18.736Z,1516732758.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:19.129Z,1516732759.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:19.536Z,1516732759.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:19.540Z,1516732759.540 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:34:19.2Z 2018-01-23T18:39:19.540Z,1516732759.540 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:39:19.540Z,1516732759.540 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:39:19.933Z,1516732759.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:20.448Z,1516732760.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:20.745Z,1516732760.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:23.902Z,1516732763.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:23.983Z,1516732763.983 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0360.lzma 2018-01-23T18:39:24.061Z,1516732764.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:24.386Z,1516732764.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:24.726Z,1516732764.726 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0360.lzma.bak 2018-01-23T18:39:24.726Z,1516732764.726 [DataOverHttps](INFO): SBD MOMSN=7756437 2018-01-23T18:39:24.786Z,1516732764.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:25.417Z,1516732765.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:25.588Z,1516732765.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:28.691Z,1516732768.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:28.844Z,1516732768.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:29.155Z,1516732769.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:29.560Z,1516732769.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:29.957Z,1516732769.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:30.389Z,1516732770.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:33.421Z,1516732773.421 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T18:39:33.421Z,1516732773.421 [NAL9602] Data Fault, FailCount= 4 2018-01-23T18:39:33.421Z,1516732773.421 [NAL9602](ERROR): Data Fault 2018-01-23T18:39:33.469Z,1516732773.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:33.513Z,1516732773.513 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T18:39:33.555Z,1516732773.555 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180123T031358/Express0361.lzma 2018-01-23T18:39:33.559Z,1516732773.559 [NAL9602](INFO): Powering down 2018-01-23T18:39:33.617Z,1516732773.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:33.969Z,1516732773.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:34.329Z,1516732774.329 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0361.lzma.bak 2018-01-23T18:39:34.329Z,1516732774.329 [DataOverHttps](INFO): SBD MOMSN=7756439 2018-01-23T18:39:34.364Z,1516732774.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:34.406Z,1516732774.406 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T18:39:34.406Z,1516732774.406 [NAL9602] No Fault, FailCount= 4 2018-01-23T18:39:35.013Z,1516732775.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:35.017Z,1516732775.017 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T18:39:35.017Z,1516732775.017 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T18:39:35.017Z,1516732775.017 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T18:39:35.173Z,1516732775.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:38.349Z,1516732778.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:38.496Z,1516732778.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:38.816Z,1516732778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:39.218Z,1516732779.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:39.615Z,1516732779.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:40.017Z,1516732780.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:40.412Z,1516732780.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:40.818Z,1516732780.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:41.214Z,1516732781.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:41.614Z,1516732781.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:42.014Z,1516732782.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:42.417Z,1516732782.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:42.812Z,1516732782.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:43.217Z,1516732783.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:43.614Z,1516732783.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:44.015Z,1516732784.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:44.419Z,1516732784.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:44.814Z,1516732784.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:45.223Z,1516732785.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:45.615Z,1516732785.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:46.020Z,1516732786.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:46.424Z,1516732786.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:46.816Z,1516732786.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:47.220Z,1516732787.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:47.619Z,1516732787.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:48.015Z,1516732788.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:48.421Z,1516732788.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:48.824Z,1516732788.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:49.219Z,1516732789.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:49.620Z,1516732789.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:50.023Z,1516732790.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:50.420Z,1516732790.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:50.820Z,1516732790.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:51.224Z,1516732791.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:51.617Z,1516732791.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:52.017Z,1516732792.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:52.424Z,1516732792.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:52.824Z,1516732792.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:53.218Z,1516732793.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:53.615Z,1516732793.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:54.021Z,1516732794.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:54.418Z,1516732794.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:54.816Z,1516732794.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:55.218Z,1516732795.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:55.626Z,1516732795.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:56.024Z,1516732796.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:56.420Z,1516732796.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:56.818Z,1516732796.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:57.228Z,1516732797.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:57.621Z,1516732797.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:58.014Z,1516732798.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:58.416Z,1516732798.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:58.817Z,1516732798.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:59.224Z,1516732799.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:39:59.620Z,1516732799.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:00.017Z,1516732800.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:00.417Z,1516732800.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:00.817Z,1516732800.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:01.217Z,1516732801.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:01.628Z,1516732801.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:02.015Z,1516732802.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:02.418Z,1516732802.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:02.818Z,1516732802.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:03.221Z,1516732803.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:03.580Z,1516732803.580 [NAL9602](INFO): Powering up NAL9602 2018-01-23T18:40:03.625Z,1516732803.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:04.018Z,1516732804.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:04.424Z,1516732804.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:04.814Z,1516732804.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:05.226Z,1516732805.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:05.616Z,1516732805.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:06.020Z,1516732806.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:06.429Z,1516732806.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:06.817Z,1516732806.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:07.225Z,1516732807.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:07.625Z,1516732807.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:08.028Z,1516732808.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:08.417Z,1516732808.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:08.824Z,1516732808.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:09.228Z,1516732809.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:09.617Z,1516732809.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:10.024Z,1516732810.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:10.419Z,1516732810.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:10.820Z,1516732810.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:11.224Z,1516732811.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:11.626Z,1516732811.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:12.025Z,1516732812.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:12.425Z,1516732812.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:12.822Z,1516732812.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:13.224Z,1516732813.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:13.620Z,1516732813.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:14.024Z,1516732814.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:14.432Z,1516732814.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:14.776Z,1516732814.776 [NAL9602](INFO): NAL9602 initialized 2018-01-23T18:40:14.829Z,1516732814.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:15.230Z,1516732815.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:15.633Z,1516732815.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:16.038Z,1516732816.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:16.436Z,1516732816.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:16.827Z,1516732816.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:17.227Z,1516732817.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:17.633Z,1516732817.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:18.005Z,1516732818.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:18.428Z,1516732818.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:18.821Z,1516732818.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:19.322Z,1516732819.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:19.613Z,1516732819.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:20.008Z,1516732820.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:20.405Z,1516732820.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:20.812Z,1516732820.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:21.212Z,1516732821.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:21.627Z,1516732821.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:22.038Z,1516732822.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:22.430Z,1516732822.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:22.827Z,1516732822.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:23.221Z,1516732823.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:23.624Z,1516732823.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:24.019Z,1516732824.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:24.434Z,1516732824.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:24.846Z,1516732824.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:25.230Z,1516732825.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:25.617Z,1516732825.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:26.015Z,1516732826.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:26.417Z,1516732826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:26.815Z,1516732826.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:27.226Z,1516732827.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:27.629Z,1516732827.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:28.030Z,1516732828.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:28.433Z,1516732828.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:28.818Z,1516732828.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:29.224Z,1516732829.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:29.625Z,1516732829.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:30.013Z,1516732830.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:30.428Z,1516732830.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:30.831Z,1516732830.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:31.230Z,1516732831.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:31.633Z,1516732831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:32.021Z,1516732832.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:32.423Z,1516732832.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:32.829Z,1516732832.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:33.224Z,1516732833.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:33.641Z,1516732833.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:34.037Z,1516732834.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:34.434Z,1516732834.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:34.820Z,1516732834.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:35.237Z,1516732835.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:35.620Z,1516732835.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:38.719Z,1516732838.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:38.869Z,1516732838.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:39.213Z,1516732839.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:39.589Z,1516732839.589 [PNI_TCM](ERROR): CRC does not match. Expected:0x35239 got:0x6466 2018-01-23T18:40:39.611Z,1516732839.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:40.014Z,1516732840.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:40.383Z,1516732840.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:40.788Z,1516732840.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:41.189Z,1516732841.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:41.586Z,1516732841.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:41.990Z,1516732841.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:42.388Z,1516732842.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:42.787Z,1516732842.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:43.185Z,1516732843.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:43.584Z,1516732843.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:43.996Z,1516732843.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:44.395Z,1516732844.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:44.789Z,1516732844.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:45.189Z,1516732845.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:45.585Z,1516732845.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:45.985Z,1516732845.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:46.382Z,1516732846.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:46.793Z,1516732846.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:47.182Z,1516732847.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:47.595Z,1516732847.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:47.992Z,1516732847.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:48.392Z,1516732848.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:48.783Z,1516732848.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:49.184Z,1516732849.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:49.585Z,1516732849.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:49.983Z,1516732849.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:50.396Z,1516732850.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:50.796Z,1516732850.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:51.190Z,1516732851.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:51.584Z,1516732851.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:51.982Z,1516732851.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:52.393Z,1516732852.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:52.397Z,1516732852.397 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:52.397Z,1516732852.397 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 307 2018-01-23T18:40:52.397Z,1516732852.397 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:40:52.418Z,1516732852.418 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:40:52.784Z,1516732852.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:52.796Z,1516732852.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:40:52.797Z,1516732852.797 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 307 2018-01-23T18:40:53.193Z,1516732853.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:53.195Z,1516732853.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:40:53.195Z,1516732853.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:40:53.196Z,1516732853.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:40:53.594Z,1516732853.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:54.003Z,1516732854.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:54.398Z,1516732854.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:54.797Z,1516732854.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:55.188Z,1516732855.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:55.590Z,1516732855.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:55.985Z,1516732855.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:56.405Z,1516732856.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:56.795Z,1516732856.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:57.194Z,1516732857.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:57.592Z,1516732857.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:57.985Z,1516732857.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:58.391Z,1516732858.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:58.797Z,1516732858.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:59.229Z,1516732859.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:40:59.594Z,1516732859.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:00.009Z,1516732860.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:00.394Z,1516732860.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:00.791Z,1516732860.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:01.193Z,1516732861.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:01.591Z,1516732861.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:01.991Z,1516732861.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:02.398Z,1516732862.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:02.799Z,1516732862.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:03.202Z,1516732863.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:03.597Z,1516732863.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:03.997Z,1516732863.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:04.405Z,1516732864.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:04.784Z,1516732864.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:05.174Z,1516732865.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:05.606Z,1516732865.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:06.010Z,1516732866.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:06.405Z,1516732866.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:06.785Z,1516732866.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:07.180Z,1516732867.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:07.180Z,1516732867.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 307 2018-01-23T18:41:07.180Z,1516732867.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:41:07.182Z,1516732867.182 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:07.182Z,1516732867.182 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 307 2018-01-23T18:41:07.182Z,1516732867.182 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:41:07.218Z,1516732867.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:41:07.219Z,1516732867.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:41:07.609Z,1516732867.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:41:07.609Z,1516732867.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 307 2018-01-23T18:41:07.610Z,1516732867.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:41:07.610Z,1516732867.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 307 2018-01-23T18:41:07.987Z,1516732867.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:41:07.988Z,1516732867.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:41:07.988Z,1516732867.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:41:07.989Z,1516732867.989 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:41:07.989Z,1516732867.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:41:07.989Z,1516732867.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:41:08.400Z,1516732868.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:41:08.401Z,1516732868.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:08.804Z,1516732868.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:41:08.805Z,1516732868.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:09.198Z,1516732869.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:41:09.199Z,1516732869.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:09.596Z,1516732869.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:41:09.597Z,1516732869.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:09.992Z,1516732869.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:41:09.993Z,1516732869.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:10.392Z,1516732870.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:41:10.393Z,1516732870.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:10.795Z,1516732870.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:41:10.796Z,1516732870.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:11.190Z,1516732871.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:41:11.195Z,1516732871.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:11.606Z,1516732871.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:41:11.607Z,1516732871.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:11.999Z,1516732871.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:41:11.000Z,1516732872.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:12.401Z,1516732872.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:41:12.402Z,1516732872.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:12.785Z,1516732872.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:41:12.786Z,1516732872.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:13.192Z,1516732873.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:41:13.193Z,1516732873.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:13.586Z,1516732873.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:41:13.587Z,1516732873.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:13.992Z,1516732873.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:41:13.993Z,1516732873.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:14.399Z,1516732874.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:41:14.400Z,1516732874.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:14.804Z,1516732874.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:41:14.805Z,1516732874.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:15.198Z,1516732875.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:41:15.199Z,1516732875.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:15.598Z,1516732875.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:41:15.599Z,1516732875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:15.980Z,1516732875.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:41:15.981Z,1516732875.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:16.405Z,1516732876.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:41:16.406Z,1516732876.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:16.804Z,1516732876.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:41:16.805Z,1516732876.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:17.203Z,1516732877.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:41:17.204Z,1516732877.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:17.591Z,1516732877.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:41:17.592Z,1516732877.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:18.004Z,1516732878.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:41:18.005Z,1516732878.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:18.396Z,1516732878.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:41:18.397Z,1516732878.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:18.807Z,1516732878.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:41:18.808Z,1516732878.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:19.198Z,1516732879.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:41:19.199Z,1516732879.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:19.576Z,1516732879.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:41:19.577Z,1516732879.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:20.003Z,1516732880.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:41:20.004Z,1516732880.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:20.410Z,1516732880.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:41:20.411Z,1516732880.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:20.802Z,1516732880.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:41:20.803Z,1516732880.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:21.198Z,1516732881.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:41:21.203Z,1516732881.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:21.580Z,1516732881.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:41:21.581Z,1516732881.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:21.980Z,1516732881.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:41:21.981Z,1516732881.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:22.403Z,1516732882.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:41:22.404Z,1516732882.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:22.815Z,1516732882.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:41:22.816Z,1516732882.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:23.187Z,1516732883.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:41:23.188Z,1516732883.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:23.584Z,1516732883.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:41:23.585Z,1516732883.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:23.984Z,1516732883.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:41:23.985Z,1516732883.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:24.387Z,1516732884.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:41:24.388Z,1516732884.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:24.790Z,1516732884.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:41:24.791Z,1516732884.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:25.193Z,1516732885.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:41:25.194Z,1516732885.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:25.584Z,1516732885.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:41:25.585Z,1516732885.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:25.981Z,1516732885.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:41:25.981Z,1516732885.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:26.393Z,1516732886.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:41:26.394Z,1516732886.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:26.794Z,1516732886.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:41:26.795Z,1516732886.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:27.201Z,1516732887.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:27.589Z,1516732887.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:27.982Z,1516732887.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:28.393Z,1516732888.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:28.797Z,1516732888.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:29.193Z,1516732889.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:29.585Z,1516732889.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:29.993Z,1516732889.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:30.395Z,1516732890.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:30.801Z,1516732890.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:31.211Z,1516732891.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:31.591Z,1516732891.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:31.989Z,1516732891.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:32.395Z,1516732892.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:32.795Z,1516732892.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:33.205Z,1516732893.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:33.588Z,1516732893.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:33.985Z,1516732893.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:34.398Z,1516732894.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:34.798Z,1516732894.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:35.197Z,1516732895.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:35.595Z,1516732895.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:35.993Z,1516732895.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:39.094Z,1516732899.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:39.237Z,1516732899.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:39.590Z,1516732899.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:39.964Z,1516732899.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:40.358Z,1516732900.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:40.759Z,1516732900.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:41.159Z,1516732901.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:41.562Z,1516732901.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:41.966Z,1516732901.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:42.374Z,1516732902.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:42.758Z,1516732902.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:43.168Z,1516732903.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:43.569Z,1516732903.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:43.962Z,1516732903.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:44.361Z,1516732904.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:44.778Z,1516732904.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:45.181Z,1516732905.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:45.575Z,1516732905.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:45.965Z,1516732905.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:46.362Z,1516732906.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:46.768Z,1516732906.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:47.165Z,1516732907.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:47.577Z,1516732907.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:47.981Z,1516732907.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:48.380Z,1516732908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:48.768Z,1516732908.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:49.168Z,1516732909.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:49.570Z,1516732909.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:49.962Z,1516732909.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:50.373Z,1516732910.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:50.775Z,1516732910.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:51.173Z,1516732911.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:51.589Z,1516732911.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:51.970Z,1516732911.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:52.357Z,1516732912.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:52.768Z,1516732912.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:53.151Z,1516732913.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:53.578Z,1516732913.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:53.981Z,1516732913.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:54.384Z,1516732914.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:54.753Z,1516732914.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:55.156Z,1516732915.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:55.559Z,1516732915.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:55.960Z,1516732915.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:56.359Z,1516732916.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:56.787Z,1516732916.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:57.162Z,1516732917.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:57.566Z,1516732917.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:57.963Z,1516732917.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:58.357Z,1516732918.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:58.765Z,1516732918.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:59.170Z,1516732919.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:59.570Z,1516732919.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:41:59.973Z,1516732919.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:00.371Z,1516732920.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:00.761Z,1516732920.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:01.169Z,1516732921.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:01.568Z,1516732921.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:01.964Z,1516732921.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:02.370Z,1516732922.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:02.770Z,1516732922.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:03.169Z,1516732923.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:03.569Z,1516732923.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:03.968Z,1516732923.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:04.359Z,1516732924.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:04.770Z,1516732924.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:05.160Z,1516732925.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:05.569Z,1516732925.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:05.981Z,1516732925.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:06.380Z,1516732926.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:06.761Z,1516732926.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:07.169Z,1516732927.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:07.568Z,1516732927.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:07.962Z,1516732927.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:08.365Z,1516732928.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:08.770Z,1516732928.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:09.169Z,1516732929.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:09.569Z,1516732929.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:09.965Z,1516732929.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:10.359Z,1516732930.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:10.761Z,1516732930.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:11.161Z,1516732931.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:11.577Z,1516732931.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:11.977Z,1516732931.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:12.380Z,1516732932.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:12.761Z,1516732932.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:13.168Z,1516732933.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:13.563Z,1516732933.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:13.964Z,1516732933.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:14.369Z,1516732934.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:14.771Z,1516732934.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:15.169Z,1516732935.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:15.576Z,1516732935.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:15.963Z,1516732935.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:16.365Z,1516732936.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:16.762Z,1516732936.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:17.171Z,1516732937.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:17.570Z,1516732937.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:17.981Z,1516732937.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:18.379Z,1516732938.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:18.773Z,1516732938.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:19.169Z,1516732939.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:19.564Z,1516732939.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:19.967Z,1516732939.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:20.365Z,1516732940.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:20.771Z,1516732940.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:21.172Z,1516732941.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:21.577Z,1516732941.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:21.970Z,1516732941.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:22.365Z,1516732942.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:22.772Z,1516732942.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:23.177Z,1516732943.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:23.581Z,1516732943.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:23.985Z,1516732943.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:24.377Z,1516732944.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:24.773Z,1516732944.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:25.157Z,1516732945.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:25.585Z,1516732945.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:25.965Z,1516732945.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:26.359Z,1516732946.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:26.767Z,1516732946.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:27.192Z,1516732947.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:27.591Z,1516732947.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:27.965Z,1516732947.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:28.360Z,1516732948.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:28.767Z,1516732948.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:29.161Z,1516732949.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:29.581Z,1516732949.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:29.977Z,1516732949.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:30.381Z,1516732950.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:30.773Z,1516732950.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:31.167Z,1516732951.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:31.568Z,1516732951.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:31.967Z,1516732951.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:32.368Z,1516732952.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:32.777Z,1516732952.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:33.174Z,1516732953.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:33.573Z,1516732953.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:33.968Z,1516732953.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:34.371Z,1516732954.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:34.771Z,1516732954.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:35.177Z,1516732955.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:35.572Z,1516732955.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:35.984Z,1516732955.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:36.380Z,1516732956.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:39.471Z,1516732959.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:39.614Z,1516732959.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:39.945Z,1516732959.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:40.354Z,1516732960.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:40.742Z,1516732960.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:41.134Z,1516732961.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:41.545Z,1516732961.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:41.937Z,1516732961.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:42.334Z,1516732962.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:42.741Z,1516732962.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:43.145Z,1516732963.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:43.545Z,1516732963.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:43.939Z,1516732963.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:44.334Z,1516732964.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:44.744Z,1516732964.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:45.136Z,1516732965.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:45.549Z,1516732965.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:45.949Z,1516732965.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:46.352Z,1516732966.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:46.745Z,1516732966.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:47.137Z,1516732967.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:47.536Z,1516732967.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:47.937Z,1516732967.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:48.336Z,1516732968.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:48.746Z,1516732968.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:49.145Z,1516732969.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:49.545Z,1516732969.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:49.936Z,1516732969.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:50.334Z,1516732970.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:50.748Z,1516732970.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:51.140Z,1516732971.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:51.580Z,1516732971.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:51.950Z,1516732971.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:52.346Z,1516732972.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:52.738Z,1516732972.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:53.134Z,1516732973.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:53.546Z,1516732973.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:53.949Z,1516732973.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:54.346Z,1516732974.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:54.745Z,1516732974.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:55.136Z,1516732975.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:55.546Z,1516732975.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:55.972Z,1516732975.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:56.347Z,1516732976.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:56.744Z,1516732976.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:57.140Z,1516732977.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:57.547Z,1516732977.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:57.950Z,1516732977.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:58.353Z,1516732978.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:58.739Z,1516732978.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:59.144Z,1516732979.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:59.548Z,1516732979.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:42:59.950Z,1516732979.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:00.348Z,1516732980.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:00.749Z,1516732980.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:01.138Z,1516732981.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:01.561Z,1516732981.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:01.957Z,1516732981.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:02.360Z,1516732982.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:02.740Z,1516732982.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:03.151Z,1516732983.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:03.550Z,1516732983.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:03.954Z,1516732983.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:04.353Z,1516732984.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:04.747Z,1516732984.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:05.145Z,1516732985.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:05.561Z,1516732985.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:05.953Z,1516732985.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:06.356Z,1516732986.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:06.745Z,1516732986.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:07.152Z,1516732987.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:07.548Z,1516732987.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:07.966Z,1516732987.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:08.347Z,1516732988.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:08.728Z,1516732988.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:09.153Z,1516732989.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:09.554Z,1516732989.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:09.957Z,1516732989.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:10.369Z,1516732990.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:10.733Z,1516732990.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:11.135Z,1516732991.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:11.566Z,1516732991.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:11.966Z,1516732991.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:12.342Z,1516732992.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:12.739Z,1516732992.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:13.136Z,1516732993.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:13.564Z,1516732993.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:13.965Z,1516732993.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:14.339Z,1516732994.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:14.745Z,1516732994.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:15.140Z,1516732995.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:15.541Z,1516732995.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:15.949Z,1516732995.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:16.343Z,1516732996.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:16.737Z,1516732996.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:17.134Z,1516732997.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:17.549Z,1516732997.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:17.946Z,1516732997.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:18.345Z,1516732998.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:18.737Z,1516732998.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:19.141Z,1516732999.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:19.549Z,1516732999.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:19.945Z,1516732999.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:20.349Z,1516733000.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:20.736Z,1516733000.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:21.146Z,1516733001.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:21.553Z,1516733001.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:21.946Z,1516733001.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:22.346Z,1516733002.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:22.737Z,1516733002.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:23.136Z,1516733003.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:23.552Z,1516733003.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:23.949Z,1516733003.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:24.343Z,1516733004.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:24.737Z,1516733004.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:25.137Z,1516733005.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:25.545Z,1516733005.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:25.945Z,1516733005.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:26.344Z,1516733006.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:26.736Z,1516733006.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:27.144Z,1516733007.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:27.549Z,1516733007.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:27.949Z,1516733007.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:28.352Z,1516733008.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:28.741Z,1516733008.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:29.136Z,1516733009.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:29.552Z,1516733009.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:29.949Z,1516733009.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:30.358Z,1516733010.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:30.744Z,1516733010.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:31.140Z,1516733011.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:31.556Z,1516733011.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:31.947Z,1516733011.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:32.353Z,1516733012.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:32.745Z,1516733012.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:33.144Z,1516733013.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:33.540Z,1516733013.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:33.938Z,1516733013.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:34.341Z,1516733014.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:34.746Z,1516733014.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:35.150Z,1516733015.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:35.547Z,1516733015.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:35.937Z,1516733015.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:36.338Z,1516733016.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:36.744Z,1516733016.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:39.833Z,1516733019.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:39.950Z,1516733019.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:40.304Z,1516733020.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:40.738Z,1516733020.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:41.105Z,1516733021.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:41.509Z,1516733021.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:41.908Z,1516733021.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:42.304Z,1516733022.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:42.707Z,1516733022.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:43.113Z,1516733023.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:43.517Z,1516733023.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:43.902Z,1516733023.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:44.309Z,1516733024.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:44.697Z,1516733024.697 [PNI_TCM](ERROR): CRC does not match. Expected:0x41784 got:0x43027 2018-01-23T18:43:44.738Z,1516733024.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:45.103Z,1516733025.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:45.509Z,1516733025.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:45.912Z,1516733025.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:46.317Z,1516733026.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:46.714Z,1516733026.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:47.104Z,1516733027.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:47.517Z,1516733027.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:47.913Z,1516733027.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:48.311Z,1516733028.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:48.719Z,1516733028.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:49.118Z,1516733029.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:49.521Z,1516733029.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:49.907Z,1516733029.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:50.307Z,1516733030.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:50.714Z,1516733030.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:51.108Z,1516733031.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:51.509Z,1516733031.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:51.920Z,1516733031.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:52.325Z,1516733032.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:52.727Z,1516733032.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:53.095Z,1516733033.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:53.501Z,1516733033.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:53.524Z,1516733033.524 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:53.524Z,1516733033.524 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 308 2018-01-23T18:43:53.524Z,1516733033.524 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:43:53.549Z,1516733033.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:43:53.926Z,1516733033.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:53.938Z,1516733033.938 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:43:53.938Z,1516733033.938 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 308 2018-01-23T18:43:54.304Z,1516733034.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:54.306Z,1516733034.306 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:43:54.306Z,1516733034.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:43:54.319Z,1516733034.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:43:54.708Z,1516733034.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:55.107Z,1516733035.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:55.525Z,1516733035.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:55.902Z,1516733035.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:56.302Z,1516733036.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:56.701Z,1516733036.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:57.127Z,1516733037.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:57.500Z,1516733037.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:57.906Z,1516733037.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:58.340Z,1516733038.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:58.735Z,1516733038.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:59.108Z,1516733039.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:59.506Z,1516733039.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:43:59.904Z,1516733039.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:00.333Z,1516733040.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:00.739Z,1516733040.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:01.133Z,1516733041.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:01.501Z,1516733041.501 [PNI_TCM](ERROR): CRC does not match. Expected:0x13516 got:0x27992 2018-01-23T18:44:01.544Z,1516733041.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:01.933Z,1516733041.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:02.300Z,1516733042.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:02.708Z,1516733042.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:03.106Z,1516733043.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:03.513Z,1516733043.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:03.910Z,1516733043.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:04.313Z,1516733044.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:04.710Z,1516733044.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:05.134Z,1516733045.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:05.502Z,1516733045.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:05.908Z,1516733045.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:06.303Z,1516733046.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:06.714Z,1516733046.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:06.964Z,1516733046.964 [CommandLine](IMPORTANT): got command configSet list 2018-01-23T18:44:06.965Z,1516733046.965 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-01-23T18:44:06.970Z,1516733046.970 [CommandLine](IMPORTANT): BPC1.loadAtStartup=0 bool; 2018-01-23T18:44:06.999Z,1516733046.999 [CommandLine](IMPORTANT): DropWeight.loadAtStartup=0 bool; 2018-01-23T18:44:06.999Z,1516733046.999 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=0 bool; 2018-01-23T18:44:07.109Z,1516733047.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:07.517Z,1516733047.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:07.906Z,1516733047.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:08.305Z,1516733048.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:08.305Z,1516733048.305 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 308 2018-01-23T18:44:08.305Z,1516733048.305 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:44:08.307Z,1516733048.307 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:08.307Z,1516733048.307 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 308 2018-01-23T18:44:08.307Z,1516733048.307 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:44:08.319Z,1516733048.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:44:08.319Z,1516733048.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:44:08.712Z,1516733048.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:44:08.712Z,1516733048.712 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 308 2018-01-23T18:44:08.712Z,1516733048.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:44:08.712Z,1516733048.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 308 2018-01-23T18:44:09.108Z,1516733049.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:44:09.109Z,1516733049.109 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:44:09.109Z,1516733049.109 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:44:09.110Z,1516733049.110 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:44:09.110Z,1516733049.110 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:44:09.111Z,1516733049.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:44:09.514Z,1516733049.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:44:09.515Z,1516733049.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:09.917Z,1516733049.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:44:09.918Z,1516733049.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:10.313Z,1516733050.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:44:10.314Z,1516733050.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:10.712Z,1516733050.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:44:10.714Z,1516733050.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:11.112Z,1516733051.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:44:11.113Z,1516733051.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:11.505Z,1516733051.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:44:11.506Z,1516733051.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:11.909Z,1516733051.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:44:11.910Z,1516733051.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:12.305Z,1516733052.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:44:12.306Z,1516733052.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:12.608Z,1516733052.608 [CommandLine](IMPORTANT): got command configSet list 2018-01-23T18:44:12.609Z,1516733052.609 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-01-23T18:44:12.609Z,1516733052.609 [CommandLine](IMPORTANT): BPC1.loadAtStartup=0 bool; 2018-01-23T18:44:12.610Z,1516733052.610 [CommandLine](IMPORTANT): DropWeight.loadAtStartup=0 bool; 2018-01-23T18:44:12.610Z,1516733052.610 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=0 bool; 2018-01-23T18:44:12.735Z,1516733052.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:44:12.736Z,1516733052.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:13.124Z,1516733053.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:44:13.125Z,1516733053.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:13.518Z,1516733053.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:44:13.519Z,1516733053.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:13.903Z,1516733053.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:44:13.904Z,1516733053.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:14.324Z,1516733054.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:44:14.325Z,1516733054.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:14.716Z,1516733054.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:44:14.716Z,1516733054.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:15.116Z,1516733055.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:44:15.117Z,1516733055.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:15.496Z,1516733055.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:44:15.497Z,1516733055.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:15.925Z,1516733055.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:44:15.926Z,1516733055.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:16.347Z,1516733056.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:44:16.348Z,1516733056.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:16.723Z,1516733056.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:44:16.724Z,1516733056.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:17.128Z,1516733057.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:44:17.129Z,1516733057.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:17.521Z,1516733057.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:44:17.522Z,1516733057.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:17.896Z,1516733057.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:44:17.897Z,1516733057.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:18.300Z,1516733058.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:44:18.301Z,1516733058.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:18.735Z,1516733058.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:44:18.736Z,1516733058.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:19.110Z,1516733059.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:44:19.111Z,1516733059.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:19.509Z,1516733059.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:44:19.510Z,1516733059.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:19.900Z,1516733059.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:44:19.901Z,1516733059.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:20.303Z,1516733060.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:44:20.304Z,1516733060.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:20.702Z,1516733060.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:44:20.703Z,1516733060.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:21.102Z,1516733061.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:44:21.107Z,1516733061.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:21.500Z,1516733061.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:44:21.501Z,1516733061.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:21.910Z,1516733061.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:44:21.911Z,1516733061.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:22.313Z,1516733062.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:44:22.313Z,1516733062.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:22.710Z,1516733062.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:44:22.711Z,1516733062.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:23.102Z,1516733063.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:44:23.103Z,1516733063.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:23.506Z,1516733063.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:44:23.511Z,1516733063.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:23.903Z,1516733063.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:44:23.904Z,1516733063.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:24.304Z,1516733064.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:44:24.305Z,1516733064.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:24.710Z,1516733064.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:44:24.711Z,1516733064.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:25.116Z,1516733065.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:44:25.117Z,1516733065.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:25.514Z,1516733065.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:44:25.519Z,1516733065.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:25.912Z,1516733065.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:44:25.913Z,1516733065.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:26.310Z,1516733066.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:44:26.311Z,1516733066.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:26.702Z,1516733066.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:44:26.703Z,1516733066.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:27.102Z,1516733067.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:44:27.103Z,1516733067.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:27.518Z,1516733067.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:44:27.519Z,1516733067.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:27.911Z,1516733067.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:44:27.912Z,1516733067.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:28.313Z,1516733068.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:28.728Z,1516733068.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:29.098Z,1516733069.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:29.517Z,1516733069.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:29.916Z,1516733069.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:30.312Z,1516733070.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:30.725Z,1516733070.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:31.122Z,1516733071.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:31.523Z,1516733071.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:31.913Z,1516733071.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:32.291Z,1516733072.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:32.701Z,1516733072.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:33.100Z,1516733073.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:33.508Z,1516733073.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:33.929Z,1516733073.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:34.310Z,1516733074.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:34.712Z,1516733074.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:35.097Z,1516733075.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:35.498Z,1516733075.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:35.501Z,1516733075.501 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:44:35.501Z,1516733075.501 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:44:35.501Z,1516733075.501 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:44:35.501Z,1516733075.501 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:44:35.904Z,1516733075.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:35.907Z,1516733075.907 [Default:CheckIn:D] Stopped 2018-01-23T18:44:35.908Z,1516733075.908 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:44:36.299Z,1516733076.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:36.302Z,1516733076.302 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 926.730794 min 2018-01-23T18:44:36.302Z,1516733076.302 [Default:CheckIn:E] Stopped 2018-01-23T18:44:36.302Z,1516733076.302 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:44:36.302Z,1516733076.302 [Default:CheckIn] Stopped 2018-01-23T18:44:36.302Z,1516733076.302 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:44:36.303Z,1516733076.303 [Default:CheckIn](INFO): Running loop #91 2018-01-23T18:44:36.303Z,1516733076.303 [Default:CheckIn] Running Loop=91 2018-01-23T18:44:36.303Z,1516733076.303 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:44:36.303Z,1516733076.303 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:44:36.313Z,1516733076.313 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:44:36.717Z,1516733076.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:37.113Z,1516733077.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:40.217Z,1516733080.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:40.353Z,1516733080.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:40.708Z,1516733080.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:41.125Z,1516733081.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:41.507Z,1516733081.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:41.917Z,1516733081.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:42.329Z,1516733082.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:42.719Z,1516733082.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:43.112Z,1516733083.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:43.514Z,1516733083.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:43.909Z,1516733083.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:44.317Z,1516733084.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:44.722Z,1516733084.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:45.122Z,1516733085.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:45.518Z,1516733085.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:45.912Z,1516733085.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:46.315Z,1516733086.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:46.718Z,1516733086.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:47.118Z,1516733087.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:47.518Z,1516733087.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:47.919Z,1516733087.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:48.321Z,1516733088.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:48.722Z,1516733088.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:49.128Z,1516733089.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:49.518Z,1516733089.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:49.922Z,1516733089.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:50.320Z,1516733090.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:50.723Z,1516733090.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:51.122Z,1516733091.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:51.525Z,1516733091.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:51.917Z,1516733091.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:52.321Z,1516733092.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:52.733Z,1516733092.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:53.168Z,1516733093.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:53.536Z,1516733093.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:53.930Z,1516733093.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:54.303Z,1516733094.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:54.731Z,1516733094.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:55.141Z,1516733095.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:55.532Z,1516733095.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:55.910Z,1516733095.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:56.324Z,1516733096.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:56.738Z,1516733096.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:57.117Z,1516733097.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:57.545Z,1516733097.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:57.909Z,1516733097.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:58.306Z,1516733098.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:58.710Z,1516733098.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:59.114Z,1516733099.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:59.522Z,1516733099.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:44:59.910Z,1516733099.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:00.307Z,1516733100.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:00.726Z,1516733100.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:01.125Z,1516733101.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:01.525Z,1516733101.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:01.910Z,1516733101.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:02.310Z,1516733102.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:02.745Z,1516733102.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:03.122Z,1516733103.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:03.519Z,1516733103.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:03.917Z,1516733103.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:04.315Z,1516733104.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:04.720Z,1516733104.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:05.121Z,1516733105.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:05.528Z,1516733105.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:05.915Z,1516733105.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:06.321Z,1516733106.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:06.723Z,1516733106.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:07.131Z,1516733107.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:07.523Z,1516733107.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:07.929Z,1516733107.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:08.308Z,1516733108.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:08.732Z,1516733108.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:09.131Z,1516733109.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:09.539Z,1516733109.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:09.915Z,1516733109.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:10.317Z,1516733110.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:10.715Z,1516733110.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:11.115Z,1516733111.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:11.513Z,1516733111.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:11.910Z,1516733111.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:12.307Z,1516733112.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:12.712Z,1516733112.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:13.114Z,1516733113.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:13.517Z,1516733113.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:13.908Z,1516733113.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:14.317Z,1516733114.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:14.717Z,1516733114.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:15.118Z,1516733115.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:15.521Z,1516733115.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:15.911Z,1516733115.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:16.306Z,1516733116.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:16.717Z,1516733116.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:17.121Z,1516733117.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:17.516Z,1516733117.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:17.916Z,1516733117.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:18.317Z,1516733118.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:18.721Z,1516733118.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:19.118Z,1516733119.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:19.521Z,1516733119.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:19.907Z,1516733119.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:20.310Z,1516733120.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:20.711Z,1516733120.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:21.118Z,1516733121.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:21.525Z,1516733121.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:21.927Z,1516733121.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:22.311Z,1516733122.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:22.720Z,1516733122.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:23.112Z,1516733123.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:23.499Z,1516733123.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:23.926Z,1516733123.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:24.333Z,1516733124.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:24.726Z,1516733124.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:25.104Z,1516733125.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:25.533Z,1516733125.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:25.908Z,1516733125.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:26.308Z,1516733126.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:26.709Z,1516733126.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:27.113Z,1516733127.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:27.518Z,1516733127.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:27.922Z,1516733127.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:28.307Z,1516733128.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:28.713Z,1516733128.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:29.109Z,1516733129.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:29.513Z,1516733129.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:29.914Z,1516733129.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:30.318Z,1516733130.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:30.714Z,1516733130.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:31.109Z,1516733131.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:31.513Z,1516733131.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:31.908Z,1516733131.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:32.316Z,1516733132.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:32.717Z,1516733132.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:33.117Z,1516733133.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:33.517Z,1516733133.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:33.918Z,1516733133.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:34.308Z,1516733134.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:34.715Z,1516733134.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:35.113Z,1516733135.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:35.510Z,1516733135.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:35.922Z,1516733135.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:36.321Z,1516733136.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:36.718Z,1516733136.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:37.111Z,1516733137.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:40.212Z,1516733140.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:40.353Z,1516733140.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:40.700Z,1516733140.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:41.105Z,1516733141.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:41.502Z,1516733141.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:41.881Z,1516733141.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:42.280Z,1516733142.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:42.684Z,1516733142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:43.082Z,1516733143.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:43.486Z,1516733143.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:43.894Z,1516733143.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:44.283Z,1516733144.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:44.681Z,1516733144.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:45.083Z,1516733145.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:45.481Z,1516733145.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:45.887Z,1516733145.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:46.287Z,1516733146.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:46.691Z,1516733146.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:47.088Z,1516733147.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:47.478Z,1516733147.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:47.889Z,1516733147.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:48.284Z,1516733148.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:48.686Z,1516733148.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:49.086Z,1516733149.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:49.486Z,1516733149.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:49.886Z,1516733149.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:50.278Z,1516733150.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:50.680Z,1516733150.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:51.081Z,1516733151.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:51.480Z,1516733151.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:51.892Z,1516733151.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:52.289Z,1516733152.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:52.689Z,1516733152.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:53.080Z,1516733153.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:53.478Z,1516733153.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:53.880Z,1516733153.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:54.288Z,1516733154.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:54.681Z,1516733154.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:55.089Z,1516733155.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:55.490Z,1516733155.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:55.886Z,1516733155.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:56.278Z,1516733156.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:56.680Z,1516733156.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:57.089Z,1516733157.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:57.479Z,1516733157.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:57.892Z,1516733157.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:58.289Z,1516733158.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:58.689Z,1516733158.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:59.083Z,1516733159.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:59.478Z,1516733159.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:45:59.882Z,1516733159.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:00.281Z,1516733160.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:00.680Z,1516733160.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:01.093Z,1516733161.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:01.488Z,1516733161.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:01.893Z,1516733161.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:02.279Z,1516733162.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:02.679Z,1516733162.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:03.081Z,1516733163.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:03.485Z,1516733163.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:03.890Z,1516733163.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:04.290Z,1516733164.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:04.697Z,1516733164.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:05.092Z,1516733165.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:05.479Z,1516733165.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:05.881Z,1516733165.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:06.296Z,1516733166.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:06.681Z,1516733166.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:07.102Z,1516733167.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:07.500Z,1516733167.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:07.894Z,1516733167.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:08.282Z,1516733168.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:08.694Z,1516733168.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:09.083Z,1516733169.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:09.491Z,1516733169.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:09.895Z,1516733169.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:10.298Z,1516733170.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:10.698Z,1516733170.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:11.092Z,1516733171.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:11.483Z,1516733171.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:11.887Z,1516733171.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:12.299Z,1516733172.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:12.688Z,1516733172.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:13.092Z,1516733173.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:13.504Z,1516733173.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:13.895Z,1516733173.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:14.288Z,1516733174.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:14.695Z,1516733174.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:15.092Z,1516733175.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:15.492Z,1516733175.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:15.898Z,1516733175.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:16.294Z,1516733176.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:16.698Z,1516733176.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:17.094Z,1516733177.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:17.487Z,1516733177.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:17.891Z,1516733177.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:18.294Z,1516733178.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:18.687Z,1516733178.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:19.093Z,1516733179.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:19.509Z,1516733179.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:19.905Z,1516733179.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:20.299Z,1516733180.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:20.702Z,1516733180.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:21.077Z,1516733181.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:21.479Z,1516733181.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:21.905Z,1516733181.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:22.305Z,1516733182.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:22.702Z,1516733182.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:23.105Z,1516733183.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:23.479Z,1516733183.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:23.885Z,1516733183.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:24.282Z,1516733184.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:24.678Z,1516733184.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:25.087Z,1516733185.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:25.511Z,1516733185.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:25.889Z,1516733185.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:26.281Z,1516733186.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:26.681Z,1516733186.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:27.080Z,1516733187.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:27.484Z,1516733187.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:27.882Z,1516733187.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:28.286Z,1516733188.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:28.682Z,1516733188.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:29.079Z,1516733189.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:29.478Z,1516733189.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:29.878Z,1516733189.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:30.279Z,1516733190.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:30.681Z,1516733190.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:31.090Z,1516733191.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:31.493Z,1516733191.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:31.897Z,1516733191.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:32.289Z,1516733192.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:32.690Z,1516733192.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:33.087Z,1516733193.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:33.487Z,1516733193.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:33.905Z,1516733193.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:34.305Z,1516733194.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:34.705Z,1516733194.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:35.116Z,1516733195.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:35.493Z,1516733195.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:35.906Z,1516733195.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:36.296Z,1516733196.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:36.699Z,1516733196.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:37.100Z,1516733197.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:37.484Z,1516733197.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:41.759Z,1516733201.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:41.889Z,1516733201.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:42.315Z,1516733202.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:42.692Z,1516733202.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:43.083Z,1516733203.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:43.492Z,1516733203.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:43.885Z,1516733203.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:44.274Z,1516733204.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:44.658Z,1516733204.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:45.061Z,1516733205.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:45.457Z,1516733205.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:45.862Z,1516733205.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:46.284Z,1516733206.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:46.711Z,1516733206.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:47.143Z,1516733207.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:47.466Z,1516733207.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:47.873Z,1516733207.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:48.309Z,1516733208.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:48.674Z,1516733208.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:49.073Z,1516733209.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:49.481Z,1516733209.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:49.882Z,1516733209.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:50.298Z,1516733210.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:50.742Z,1516733210.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:51.054Z,1516733211.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:51.490Z,1516733211.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:51.905Z,1516733211.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:52.326Z,1516733212.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:52.706Z,1516733212.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:53.092Z,1516733213.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:53.453Z,1516733213.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:53.886Z,1516733213.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:54.313Z,1516733214.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:54.317Z,1516733214.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:54.318Z,1516733214.318 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 309 2018-01-23T18:46:54.318Z,1516733214.318 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:46:54.366Z,1516733214.366 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:46:54.701Z,1516733214.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:54.738Z,1516733214.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:46:54.738Z,1516733214.738 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 309 2018-01-23T18:46:55.101Z,1516733215.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:55.102Z,1516733215.102 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:46:55.107Z,1516733215.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:46:55.107Z,1516733215.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:46:55.468Z,1516733215.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:55.905Z,1516733215.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:56.301Z,1516733216.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:56.716Z,1516733216.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:57.072Z,1516733217.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:57.479Z,1516733217.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:57.874Z,1516733217.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:58.279Z,1516733218.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:58.693Z,1516733218.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:59.126Z,1516733219.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:59.473Z,1516733219.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:46:59.882Z,1516733219.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:00.250Z,1516733220.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:00.684Z,1516733220.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:01.085Z,1516733221.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:01.527Z,1516733221.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:01.885Z,1516733221.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:02.291Z,1516733222.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:02.691Z,1516733222.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:03.062Z,1516733223.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:03.478Z,1516733223.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:03.911Z,1516733223.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:04.273Z,1516733224.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:04.705Z,1516733224.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:05.112Z,1516733225.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:05.476Z,1516733225.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:05.923Z,1516733225.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:06.279Z,1516733226.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:06.648Z,1516733226.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:07.077Z,1516733227.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:07.477Z,1516733227.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:07.873Z,1516733227.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:08.253Z,1516733228.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:08.648Z,1516733228.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:09.053Z,1516733229.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:09.456Z,1516733229.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:09.456Z,1516733229.456 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 309 2018-01-23T18:47:09.456Z,1516733229.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:47:09.458Z,1516733229.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:09.458Z,1516733229.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 309 2018-01-23T18:47:09.458Z,1516733229.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:47:09.503Z,1516733229.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:47:09.504Z,1516733229.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:47:09.898Z,1516733229.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:47:09.898Z,1516733229.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 309 2018-01-23T18:47:09.899Z,1516733229.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:47:09.899Z,1516733229.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 309 2018-01-23T18:47:10.260Z,1516733230.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:47:10.260Z,1516733230.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:47:10.260Z,1516733230.260 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:47:10.261Z,1516733230.261 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:47:10.261Z,1516733230.261 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:47:10.262Z,1516733230.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:47:10.657Z,1516733230.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:47:10.658Z,1516733230.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:11.064Z,1516733231.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:47:11.065Z,1516733231.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:11.450Z,1516733231.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:47:11.451Z,1516733231.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:11.860Z,1516733231.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:47:11.861Z,1516733231.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:12.252Z,1516733232.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:47:12.253Z,1516733232.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:12.654Z,1516733232.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:47:12.655Z,1516733232.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:13.059Z,1516733233.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:47:13.060Z,1516733233.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:13.456Z,1516733233.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:47:13.457Z,1516733233.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:13.860Z,1516733233.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:47:13.861Z,1516733233.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:14.256Z,1516733234.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:47:14.257Z,1516733234.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:14.656Z,1516733234.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:47:14.657Z,1516733234.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:15.056Z,1516733235.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:47:15.057Z,1516733235.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:15.452Z,1516733235.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:47:15.453Z,1516733235.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:15.854Z,1516733235.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:47:15.855Z,1516733235.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:16.258Z,1516733236.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:47:16.259Z,1516733236.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:16.669Z,1516733236.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:47:16.670Z,1516733236.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:17.061Z,1516733237.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:47:17.062Z,1516733237.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:17.453Z,1516733237.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:47:17.454Z,1516733237.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:17.852Z,1516733237.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:47:17.853Z,1516733237.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:18.260Z,1516733238.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:47:18.261Z,1516733238.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:18.655Z,1516733238.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:47:18.656Z,1516733238.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:19.076Z,1516733239.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:47:19.077Z,1516733239.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:19.466Z,1516733239.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:47:19.467Z,1516733239.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:19.869Z,1516733239.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:47:19.870Z,1516733239.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:20.259Z,1516733240.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:47:20.260Z,1516733240.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:20.667Z,1516733240.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:47:20.668Z,1516733240.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:21.060Z,1516733241.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:47:21.060Z,1516733241.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:21.456Z,1516733241.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:47:21.457Z,1516733241.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:21.864Z,1516733241.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:47:21.865Z,1516733241.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:22.267Z,1516733242.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:47:22.268Z,1516733242.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:22.674Z,1516733242.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:47:22.675Z,1516733242.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:23.071Z,1516733243.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:47:23.072Z,1516733243.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:23.482Z,1516733243.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:47:23.484Z,1516733243.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:23.861Z,1516733243.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:47:23.862Z,1516733243.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:24.266Z,1516733244.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:47:24.267Z,1516733244.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:24.656Z,1516733244.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:47:24.657Z,1516733244.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:25.082Z,1516733245.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:47:25.083Z,1516733245.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:25.484Z,1516733245.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:47:25.485Z,1516733245.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:25.881Z,1516733245.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:47:25.882Z,1516733245.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:26.258Z,1516733246.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:47:26.259Z,1516733246.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:26.652Z,1516733246.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:47:26.653Z,1516733246.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:27.100Z,1516733247.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:47:27.101Z,1516733247.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:27.454Z,1516733247.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:47:27.456Z,1516733247.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:27.872Z,1516733247.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:47:27.873Z,1516733247.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:28.281Z,1516733248.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:47:28.282Z,1516733248.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:28.660Z,1516733248.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:47:28.661Z,1516733248.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:29.060Z,1516733249.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:47:29.061Z,1516733249.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:29.460Z,1516733249.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:29.854Z,1516733249.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:30.255Z,1516733250.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:30.658Z,1516733250.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:31.060Z,1516733251.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:31.464Z,1516733251.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:31.861Z,1516733251.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:32.253Z,1516733252.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:32.656Z,1516733252.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:33.061Z,1516733253.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:33.475Z,1516733253.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:33.848Z,1516733253.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x22737 got:0x49815 2018-01-23T18:47:33.865Z,1516733253.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:34.272Z,1516733254.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:34.663Z,1516733254.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:35.079Z,1516733255.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:35.447Z,1516733255.447 [PNI_TCM](ERROR): CRC does not match. Expected:0x62321 got:0x16837 2018-01-23T18:47:35.479Z,1516733255.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:35.856Z,1516733255.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:36.256Z,1516733256.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:36.674Z,1516733256.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:37.083Z,1516733257.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:37.488Z,1516733257.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:37.862Z,1516733257.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:40.989Z,1516733260.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:41.106Z,1516733261.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:41.483Z,1516733261.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:41.883Z,1516733261.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:42.261Z,1516733262.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:42.663Z,1516733262.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:43.073Z,1516733263.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:43.461Z,1516733263.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:43.860Z,1516733263.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:44.264Z,1516733264.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:44.685Z,1516733264.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:45.064Z,1516733265.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:45.459Z,1516733265.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:45.857Z,1516733265.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:46.286Z,1516733266.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:46.674Z,1516733266.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:47.092Z,1516733267.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:47.508Z,1516733267.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:47.904Z,1516733267.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:48.277Z,1516733268.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:48.663Z,1516733268.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:49.065Z,1516733269.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:49.479Z,1516733269.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:49.861Z,1516733269.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:50.270Z,1516733270.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:50.681Z,1516733270.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:51.093Z,1516733271.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:51.460Z,1516733271.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:51.865Z,1516733271.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:52.261Z,1516733272.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:52.664Z,1516733272.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:53.150Z,1516733273.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:53.475Z,1516733273.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:53.868Z,1516733273.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:54.273Z,1516733274.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:54.665Z,1516733274.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:55.061Z,1516733275.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:55.464Z,1516733275.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:55.863Z,1516733275.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:56.267Z,1516733276.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:56.673Z,1516733276.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:57.072Z,1516733277.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:57.469Z,1516733277.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:57.863Z,1516733277.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:58.258Z,1516733278.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:58.670Z,1516733278.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:59.066Z,1516733279.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:59.480Z,1516733279.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:47:59.875Z,1516733279.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:00.263Z,1516733280.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:00.658Z,1516733280.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:01.066Z,1516733281.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:01.500Z,1516733281.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:01.864Z,1516733281.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:02.271Z,1516733282.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:02.673Z,1516733282.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:03.077Z,1516733283.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:03.462Z,1516733283.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:03.861Z,1516733283.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:04.265Z,1516733284.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:04.665Z,1516733284.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:05.072Z,1516733285.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:05.471Z,1516733285.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:05.879Z,1516733285.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:06.257Z,1516733286.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:06.661Z,1516733286.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:07.059Z,1516733287.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:07.463Z,1516733287.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:07.863Z,1516733287.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:08.266Z,1516733288.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:08.670Z,1516733288.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:09.073Z,1516733289.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:09.459Z,1516733289.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:09.865Z,1516733289.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:10.265Z,1516733290.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:10.666Z,1516733290.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:11.071Z,1516733291.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:11.472Z,1516733291.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:11.872Z,1516733291.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:12.263Z,1516733292.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:12.667Z,1516733292.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:13.065Z,1516733293.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:13.467Z,1516733293.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:13.863Z,1516733293.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:14.267Z,1516733294.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:14.670Z,1516733294.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:15.068Z,1516733295.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:15.470Z,1516733295.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:15.869Z,1516733295.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:16.264Z,1516733296.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:16.671Z,1516733296.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:17.077Z,1516733297.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:17.480Z,1516733297.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:17.888Z,1516733297.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:18.250Z,1516733298.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:18.650Z,1516733298.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:19.052Z,1516733299.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:19.461Z,1516733299.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:19.869Z,1516733299.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:20.267Z,1516733300.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:20.665Z,1516733300.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:21.066Z,1516733301.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:21.469Z,1516733301.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:21.861Z,1516733301.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:22.260Z,1516733302.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:22.664Z,1516733302.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:23.067Z,1516733303.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:23.469Z,1516733303.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:23.866Z,1516733303.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:24.257Z,1516733304.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:24.660Z,1516733304.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:25.068Z,1516733305.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:25.458Z,1516733305.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:25.857Z,1516733305.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:26.266Z,1516733306.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:26.673Z,1516733306.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:27.067Z,1516733307.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:27.460Z,1516733307.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:27.863Z,1516733307.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:28.264Z,1516733308.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:28.665Z,1516733308.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:29.075Z,1516733309.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:29.481Z,1516733309.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:29.870Z,1516733309.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:30.260Z,1516733310.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:30.669Z,1516733310.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:31.070Z,1516733311.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:31.477Z,1516733311.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:31.862Z,1516733311.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:32.257Z,1516733312.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:32.663Z,1516733312.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:33.061Z,1516733313.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:33.462Z,1516733313.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:33.862Z,1516733313.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:34.257Z,1516733314.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:34.656Z,1516733314.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:35.061Z,1516733315.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:35.494Z,1516733315.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:35.868Z,1516733315.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:36.259Z,1516733316.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:36.658Z,1516733316.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:37.061Z,1516733317.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:37.462Z,1516733317.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:37.862Z,1516733317.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:38.263Z,1516733318.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:41.410Z,1516733321.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:41.548Z,1516733321.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:41.939Z,1516733321.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:42.319Z,1516733322.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:42.701Z,1516733322.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:43.101Z,1516733323.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:43.502Z,1516733323.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:43.900Z,1516733323.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:44.309Z,1516733324.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:44.711Z,1516733324.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:45.111Z,1516733325.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:45.497Z,1516733325.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:45.885Z,1516733325.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:46.286Z,1516733326.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:46.714Z,1516733326.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:47.119Z,1516733327.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:47.512Z,1516733327.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:47.918Z,1516733327.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:48.294Z,1516733328.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:48.688Z,1516733328.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:49.088Z,1516733329.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:49.496Z,1516733329.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:49.917Z,1516733329.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:50.323Z,1516733330.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:50.702Z,1516733330.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:51.094Z,1516733331.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:51.503Z,1516733331.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:51.892Z,1516733331.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:52.306Z,1516733332.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:52.696Z,1516733332.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:53.109Z,1516733333.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:53.512Z,1516733333.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:53.911Z,1516733333.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:54.303Z,1516733334.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:54.702Z,1516733334.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:55.098Z,1516733335.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:55.504Z,1516733335.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:55.900Z,1516733335.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:56.313Z,1516733336.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:56.706Z,1516733336.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:57.106Z,1516733337.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:57.501Z,1516733337.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:57.906Z,1516733337.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:58.303Z,1516733338.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:58.703Z,1516733338.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:59.115Z,1516733339.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:59.506Z,1516733339.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:48:59.910Z,1516733339.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:00.306Z,1516733340.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:00.704Z,1516733340.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:01.112Z,1516733341.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:01.509Z,1516733341.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:01.913Z,1516733341.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:02.297Z,1516733342.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:02.712Z,1516733342.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:03.113Z,1516733343.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:03.517Z,1516733343.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:03.923Z,1516733343.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:04.288Z,1516733344.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:04.693Z,1516733344.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:05.123Z,1516733345.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:05.498Z,1516733345.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:05.923Z,1516733345.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:06.299Z,1516733346.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:06.697Z,1516733346.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:07.101Z,1516733347.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:07.510Z,1516733347.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:07.897Z,1516733347.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:08.301Z,1516733348.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:08.696Z,1516733348.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:09.101Z,1516733349.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:09.502Z,1516733349.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:09.897Z,1516733349.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:10.293Z,1516733350.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:10.690Z,1516733350.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:11.104Z,1516733351.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:11.502Z,1516733351.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:11.902Z,1516733351.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:12.292Z,1516733352.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:12.699Z,1516733352.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:13.110Z,1516733353.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:13.514Z,1516733353.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:13.906Z,1516733353.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:14.296Z,1516733354.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:14.713Z,1516733354.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:15.104Z,1516733355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:15.515Z,1516733355.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:15.909Z,1516733355.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:16.284Z,1516733356.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:16.711Z,1516733356.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:17.114Z,1516733357.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:17.506Z,1516733357.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:17.910Z,1516733357.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:18.317Z,1516733358.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:18.713Z,1516733358.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:19.118Z,1516733359.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:19.520Z,1516733359.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:19.918Z,1516733359.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:20.296Z,1516733360.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:20.693Z,1516733360.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:21.094Z,1516733361.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:21.522Z,1516733361.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:21.922Z,1516733361.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:22.290Z,1516733362.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:22.697Z,1516733362.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:23.106Z,1516733363.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:23.494Z,1516733363.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:23.906Z,1516733363.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:24.298Z,1516733364.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:24.697Z,1516733364.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:25.099Z,1516733365.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:25.499Z,1516733365.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:25.898Z,1516733365.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:26.297Z,1516733366.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:26.693Z,1516733366.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:27.113Z,1516733367.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:27.505Z,1516733367.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:27.904Z,1516733367.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:28.301Z,1516733368.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:28.696Z,1516733368.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:29.101Z,1516733369.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:29.502Z,1516733369.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:29.904Z,1516733369.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:30.303Z,1516733370.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:30.701Z,1516733370.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:31.105Z,1516733371.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:31.500Z,1516733371.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:31.905Z,1516733371.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:32.304Z,1516733372.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:32.706Z,1516733372.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:33.104Z,1516733373.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:33.499Z,1516733373.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:33.905Z,1516733373.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:34.293Z,1516733374.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:34.696Z,1516733374.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:35.083Z,1516733375.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:35.510Z,1516733375.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:35.921Z,1516733375.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:36.320Z,1516733376.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:36.324Z,1516733376.324 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:44:36.3Z 2018-01-23T18:49:36.324Z,1516733376.324 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:49:36.324Z,1516733376.324 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:49:36.713Z,1516733376.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:37.233Z,1516733377.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:37.497Z,1516733377.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:40.587Z,1516733380.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:40.667Z,1516733380.667 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0364.lzma 2018-01-23T18:49:40.745Z,1516733380.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:41.073Z,1516733381.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:41.417Z,1516733381.417 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0364.lzma.bak 2018-01-23T18:49:41.417Z,1516733381.417 [DataOverHttps](INFO): SBD MOMSN=7756449 2018-01-23T18:49:41.482Z,1516733381.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:42.183Z,1516733382.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:42.321Z,1516733382.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:45.347Z,1516733385.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:45.480Z,1516733385.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:45.855Z,1516733385.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:46.260Z,1516733386.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:46.653Z,1516733386.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:47.055Z,1516733387.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:50.135Z,1516733390.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:50.221Z,1516733390.221 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20180123T031358/Express0365.lzma 2018-01-23T18:49:50.288Z,1516733390.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:50.606Z,1516733390.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:50.958Z,1516733390.958 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0365.lzma.bak 2018-01-23T18:49:50.958Z,1516733390.958 [DataOverHttps](INFO): SBD MOMSN=7756451 2018-01-23T18:49:51.040Z,1516733391.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:51.659Z,1516733391.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:51.662Z,1516733391.662 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T18:49:51.662Z,1516733391.662 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T18:49:51.662Z,1516733391.662 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T18:49:51.807Z,1516733391.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:54.901Z,1516733394.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:55.037Z,1516733395.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:55.397Z,1516733395.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:55.399Z,1516733395.399 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:55.400Z,1516733395.400 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 310 2018-01-23T18:49:55.400Z,1516733395.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:49:55.412Z,1516733395.412 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:49:55.793Z,1516733395.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:55.806Z,1516733395.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:49:55.806Z,1516733395.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 310 2018-01-23T18:49:56.171Z,1516733396.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:56.172Z,1516733396.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:49:56.173Z,1516733396.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:49:56.173Z,1516733396.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:49:56.672Z,1516733396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:56.968Z,1516733396.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:57.370Z,1516733397.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:57.767Z,1516733397.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:58.171Z,1516733398.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:58.571Z,1516733398.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:58.971Z,1516733398.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:59.368Z,1516733399.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:49:59.771Z,1516733399.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:00.171Z,1516733400.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:00.574Z,1516733400.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:00.970Z,1516733400.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:01.384Z,1516733401.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:01.773Z,1516733401.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:02.184Z,1516733402.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:02.581Z,1516733402.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:02.979Z,1516733402.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:03.372Z,1516733403.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:03.773Z,1516733403.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:04.178Z,1516733404.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:04.587Z,1516733404.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:04.979Z,1516733404.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:05.373Z,1516733405.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:05.775Z,1516733405.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:06.180Z,1516733406.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:06.582Z,1516733406.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:06.985Z,1516733406.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:07.379Z,1516733407.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:07.773Z,1516733407.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:08.182Z,1516733408.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:08.583Z,1516733408.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:08.979Z,1516733408.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:09.381Z,1516733409.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:09.774Z,1516733409.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:10.183Z,1516733410.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:10.581Z,1516733410.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:10.581Z,1516733410.581 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 310 2018-01-23T18:50:10.581Z,1516733410.581 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:50:10.583Z,1516733410.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:10.584Z,1516733410.584 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 310 2018-01-23T18:50:10.584Z,1516733410.584 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:50:10.596Z,1516733410.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:50:10.596Z,1516733410.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:50:11.006Z,1516733411.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:50:11.006Z,1516733411.006 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 310 2018-01-23T18:50:11.015Z,1516733411.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:50:11.015Z,1516733411.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 310 2018-01-23T18:50:11.380Z,1516733411.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:50:11.381Z,1516733411.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:50:11.381Z,1516733411.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:50:11.382Z,1516733411.382 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:50:11.382Z,1516733411.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:50:11.382Z,1516733411.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:50:11.779Z,1516733411.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:50:11.780Z,1516733411.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:12.180Z,1516733412.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:50:12.181Z,1516733412.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:12.583Z,1516733412.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:50:12.584Z,1516733412.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:12.980Z,1516733412.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:50:12.981Z,1516733412.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:13.376Z,1516733413.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:50:13.377Z,1516733413.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:13.781Z,1516733413.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:50:13.782Z,1516733413.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:14.187Z,1516733414.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:50:14.188Z,1516733414.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:14.585Z,1516733414.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:50:14.585Z,1516733414.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:14.990Z,1516733414.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:50:14.991Z,1516733414.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:15.357Z,1516733415.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:50:15.358Z,1516733415.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:15.780Z,1516733415.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:50:15.781Z,1516733415.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:16.163Z,1516733416.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:50:16.164Z,1516733416.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:16.529Z,1516733416.529 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T18:50:16.530Z,1516733416.530 [NAL9602] Data Fault, FailCount= 5 2018-01-23T18:50:16.530Z,1516733416.530 [NAL9602](ERROR): Data Fault 2018-01-23T18:50:16.568Z,1516733416.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:50:16.569Z,1516733416.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:16.623Z,1516733416.623 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T18:50:16.623Z,1516733416.623 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T18:50:16.940Z,1516733416.940 [NAL9602](INFO): Powering down 2018-01-23T18:50:16.972Z,1516733416.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:50:16.973Z,1516733416.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:17.009Z,1516733417.009 [CBIT](INFO): Critical error at 20180123T185016 2018-01-23T18:50:17.366Z,1516733417.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:50:17.367Z,1516733417.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:17.767Z,1516733417.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:50:17.768Z,1516733417.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:18.164Z,1516733418.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:50:18.165Z,1516733418.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:18.567Z,1516733418.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:50:18.568Z,1516733418.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:18.962Z,1516733418.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:50:18.963Z,1516733418.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:19.370Z,1516733419.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:50:19.371Z,1516733419.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:19.764Z,1516733419.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:50:19.765Z,1516733419.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:20.164Z,1516733420.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:50:20.165Z,1516733420.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:20.572Z,1516733420.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:50:20.573Z,1516733420.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:20.967Z,1516733420.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:50:20.968Z,1516733420.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:21.362Z,1516733421.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:50:21.363Z,1516733421.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:21.772Z,1516733421.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:50:21.773Z,1516733421.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:22.165Z,1516733422.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:50:22.166Z,1516733422.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:22.562Z,1516733422.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:50:22.563Z,1516733422.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:22.972Z,1516733422.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:50:22.973Z,1516733422.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:23.365Z,1516733423.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:50:23.366Z,1516733423.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:23.765Z,1516733423.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:50:23.766Z,1516733423.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:24.172Z,1516733424.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:50:24.173Z,1516733424.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:24.568Z,1516733424.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:50:24.569Z,1516733424.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:24.963Z,1516733424.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:50:24.964Z,1516733424.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:25.372Z,1516733425.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:50:25.373Z,1516733425.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:25.772Z,1516733425.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:50:25.773Z,1516733425.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:26.164Z,1516733426.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:50:26.165Z,1516733426.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:26.568Z,1516733426.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:50:26.569Z,1516733426.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:26.968Z,1516733426.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:50:26.969Z,1516733426.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:27.365Z,1516733427.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:50:27.366Z,1516733427.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:27.772Z,1516733427.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:50:27.773Z,1516733427.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:28.169Z,1516733428.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:50:28.170Z,1516733428.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:28.564Z,1516733428.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:50:28.565Z,1516733428.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:28.972Z,1516733428.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:50:28.973Z,1516733428.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:29.370Z,1516733429.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:50:29.371Z,1516733429.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:29.769Z,1516733429.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:50:29.770Z,1516733429.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:30.167Z,1516733430.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:50:30.168Z,1516733430.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:30.566Z,1516733430.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:50:30.568Z,1516733430.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:30.965Z,1516733430.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:31.376Z,1516733431.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:31.782Z,1516733431.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:32.167Z,1516733432.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:32.566Z,1516733432.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:32.977Z,1516733432.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:33.364Z,1516733433.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:33.766Z,1516733433.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:34.170Z,1516733434.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:34.568Z,1516733434.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:34.971Z,1516733434.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:35.369Z,1516733435.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:35.766Z,1516733435.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:36.176Z,1516733436.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:36.577Z,1516733436.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:36.969Z,1516733436.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:37.372Z,1516733437.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:37.773Z,1516733437.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:38.172Z,1516733438.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:38.565Z,1516733438.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:38.974Z,1516733438.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:39.370Z,1516733439.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:39.775Z,1516733439.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:40.174Z,1516733440.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:40.566Z,1516733440.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:40.979Z,1516733440.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:41.377Z,1516733441.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:41.774Z,1516733441.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:42.167Z,1516733442.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:42.574Z,1516733442.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:42.970Z,1516733442.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:43.377Z,1516733443.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:43.775Z,1516733443.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:44.172Z,1516733444.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:44.576Z,1516733444.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:44.977Z,1516733444.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:45.380Z,1516733445.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:45.773Z,1516733445.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:46.172Z,1516733446.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:46.578Z,1516733446.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:46.981Z,1516733446.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:47.385Z,1516733447.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:47.779Z,1516733447.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:48.177Z,1516733448.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:48.573Z,1516733448.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:48.988Z,1516733448.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:49.354Z,1516733449.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x4589 got:0x125 2018-01-23T18:50:49.388Z,1516733449.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:49.761Z,1516733449.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:50.184Z,1516733450.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:50.570Z,1516733450.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:50.963Z,1516733450.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:51.367Z,1516733451.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:51.768Z,1516733451.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:52.169Z,1516733452.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:55.260Z,1516733455.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:55.378Z,1516733455.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:55.729Z,1516733455.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:56.127Z,1516733456.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:56.522Z,1516733456.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:56.928Z,1516733456.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:57.324Z,1516733457.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:57.721Z,1516733457.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:58.128Z,1516733458.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:58.524Z,1516733458.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:58.921Z,1516733458.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:59.321Z,1516733459.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:50:59.725Z,1516733459.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:00.121Z,1516733460.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:00.528Z,1516733460.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:00.923Z,1516733460.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:01.322Z,1516733461.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:01.722Z,1516733461.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:02.122Z,1516733462.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:02.521Z,1516733462.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:02.928Z,1516733462.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:03.329Z,1516733463.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:03.723Z,1516733463.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:04.130Z,1516733464.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:04.528Z,1516733464.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:04.922Z,1516733464.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:05.327Z,1516733465.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:05.727Z,1516733465.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:06.122Z,1516733466.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:06.525Z,1516733466.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:06.926Z,1516733466.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:07.322Z,1516733467.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:07.728Z,1516733467.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:08.127Z,1516733468.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:08.523Z,1516733468.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:08.928Z,1516733468.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:09.326Z,1516733469.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:09.722Z,1516733469.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:10.128Z,1516733470.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:10.526Z,1516733470.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:10.922Z,1516733470.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:11.328Z,1516733471.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:11.726Z,1516733471.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:12.122Z,1516733472.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:12.534Z,1516733472.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:12.926Z,1516733472.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:13.323Z,1516733473.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:13.729Z,1516733473.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:14.126Z,1516733474.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:14.523Z,1516733474.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:14.928Z,1516733474.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:15.327Z,1516733475.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:15.723Z,1516733475.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:16.128Z,1516733476.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:16.527Z,1516733476.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:16.921Z,1516733476.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:17.329Z,1516733477.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:17.729Z,1516733477.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:18.122Z,1516733478.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:18.531Z,1516733478.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:18.929Z,1516733478.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:19.322Z,1516733479.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:19.730Z,1516733479.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:20.124Z,1516733480.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:20.523Z,1516733480.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:20.942Z,1516733480.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:21.333Z,1516733481.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:21.731Z,1516733481.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:22.124Z,1516733482.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:22.526Z,1516733482.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:22.935Z,1516733482.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:23.331Z,1516733483.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:23.729Z,1516733483.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:24.132Z,1516733484.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:24.530Z,1516733484.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:24.932Z,1516733484.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:25.323Z,1516733485.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:25.714Z,1516733485.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:26.112Z,1516733486.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:26.519Z,1516733486.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:26.926Z,1516733486.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:27.315Z,1516733487.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:27.719Z,1516733487.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:28.118Z,1516733488.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:28.515Z,1516733488.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:28.926Z,1516733488.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:29.324Z,1516733489.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:29.718Z,1516733489.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:30.122Z,1516733490.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:30.519Z,1516733490.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:30.919Z,1516733490.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:31.321Z,1516733491.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:31.720Z,1516733491.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:32.119Z,1516733492.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:32.527Z,1516733492.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:32.920Z,1516733492.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:33.319Z,1516733493.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:33.721Z,1516733493.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:34.121Z,1516733494.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:34.519Z,1516733494.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:34.921Z,1516733494.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:35.325Z,1516733495.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:35.723Z,1516733495.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:36.121Z,1516733496.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:36.527Z,1516733496.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:36.925Z,1516733496.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:37.321Z,1516733497.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:37.723Z,1516733497.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:38.120Z,1516733498.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:38.522Z,1516733498.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:38.956Z,1516733498.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:39.322Z,1516733499.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:39.734Z,1516733499.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:40.140Z,1516733500.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:40.583Z,1516733500.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:40.933Z,1516733500.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:41.368Z,1516733501.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:41.740Z,1516733501.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:42.133Z,1516733502.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:42.575Z,1516733502.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:42.975Z,1516733502.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:43.367Z,1516733503.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:43.741Z,1516733503.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:44.177Z,1516733504.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:44.586Z,1516733504.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:44.941Z,1516733504.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:45.396Z,1516733505.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:45.750Z,1516733505.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:46.137Z,1516733506.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:46.539Z,1516733506.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:46.984Z,1516733506.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:47.334Z,1516733507.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:47.760Z,1516733507.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:48.152Z,1516733508.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:48.572Z,1516733508.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:48.970Z,1516733508.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:49.341Z,1516733509.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:49.734Z,1516733509.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:50.144Z,1516733510.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:50.534Z,1516733510.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:50.934Z,1516733510.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:51.328Z,1516733511.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:51.770Z,1516733511.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:52.166Z,1516733512.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:52.540Z,1516733512.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:58.691Z,1516733518.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:58.849Z,1516733518.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:59.217Z,1516733519.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:59.592Z,1516733519.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:51:59.997Z,1516733519.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:00.387Z,1516733520.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:00.788Z,1516733520.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:01.194Z,1516733521.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:01.588Z,1516733521.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:01.985Z,1516733521.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:02.391Z,1516733522.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:02.789Z,1516733522.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:03.184Z,1516733523.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:03.586Z,1516733523.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:03.990Z,1516733523.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:04.385Z,1516733524.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:04.787Z,1516733524.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:05.188Z,1516733525.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:05.597Z,1516733525.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:05.987Z,1516733525.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:06.396Z,1516733526.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:06.802Z,1516733526.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:07.196Z,1516733527.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:07.600Z,1516733527.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:08.003Z,1516733528.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:08.404Z,1516733528.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:08.806Z,1516733528.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:09.182Z,1516733529.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:09.586Z,1516733529.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:09.984Z,1516733529.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:10.376Z,1516733530.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:10.778Z,1516733530.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:11.179Z,1516733531.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:11.584Z,1516733531.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:11.986Z,1516733531.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:12.389Z,1516733532.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:12.784Z,1516733532.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:13.184Z,1516733533.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:13.593Z,1516733533.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:13.982Z,1516733533.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:14.390Z,1516733534.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:14.789Z,1516733534.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:15.186Z,1516733535.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:15.585Z,1516733535.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:15.986Z,1516733535.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:16.385Z,1516733536.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:16.797Z,1516733536.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:16.827Z,1516733536.827 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T18:52:16.827Z,1516733536.827 [NAL9602] No Fault, FailCount= 5 2018-01-23T18:52:17.157Z,1516733537.157 [NAL9602](INFO): Powering up NAL9602 2018-01-23T18:52:17.189Z,1516733537.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:17.586Z,1516733537.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:17.992Z,1516733537.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:18.390Z,1516733538.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:18.788Z,1516733538.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:19.184Z,1516733539.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:19.587Z,1516733539.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:19.986Z,1516733539.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:20.392Z,1516733540.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:20.802Z,1516733540.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:21.196Z,1516733541.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:21.592Z,1516733541.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:21.993Z,1516733541.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:22.389Z,1516733542.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:22.795Z,1516733542.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:23.201Z,1516733543.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:23.587Z,1516733543.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:23.998Z,1516733543.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:24.395Z,1516733544.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:24.790Z,1516733544.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:25.198Z,1516733545.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:25.589Z,1516733545.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:25.989Z,1516733545.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:26.389Z,1516733546.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:26.792Z,1516733546.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:27.189Z,1516733547.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:27.597Z,1516733547.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:27.998Z,1516733547.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:28.348Z,1516733548.348 [NAL9602](INFO): NAL9602 initialized 2018-01-23T18:52:28.394Z,1516733548.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:28.799Z,1516733548.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:29.200Z,1516733549.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:29.602Z,1516733549.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:29.998Z,1516733549.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:30.398Z,1516733550.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:30.789Z,1516733550.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:31.190Z,1516733551.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:31.690Z,1516733551.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:31.998Z,1516733551.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:32.401Z,1516733552.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:32.799Z,1516733552.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:33.189Z,1516733553.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:33.589Z,1516733553.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:33.996Z,1516733553.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:34.393Z,1516733554.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:34.789Z,1516733554.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:35.199Z,1516733555.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:35.605Z,1516733555.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:35.997Z,1516733555.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:36.396Z,1516733556.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:36.792Z,1516733556.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:37.190Z,1516733557.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:37.596Z,1516733557.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:38.002Z,1516733558.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:38.401Z,1516733558.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:38.799Z,1516733558.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:39.191Z,1516733559.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:39.598Z,1516733559.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:39.989Z,1516733559.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:40.391Z,1516733560.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:40.790Z,1516733560.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:41.199Z,1516733561.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:41.609Z,1516733561.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:41.999Z,1516733561.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:42.401Z,1516733562.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:42.790Z,1516733562.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:43.198Z,1516733563.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:43.590Z,1516733563.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:44.002Z,1516733564.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:44.403Z,1516733564.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:44.814Z,1516733564.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:45.192Z,1516733565.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:45.594Z,1516733565.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:45.998Z,1516733565.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:46.396Z,1516733566.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:46.799Z,1516733566.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:47.200Z,1516733567.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:47.610Z,1516733567.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:48.009Z,1516733568.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:48.396Z,1516733568.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:48.796Z,1516733568.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:49.201Z,1516733569.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:49.605Z,1516733569.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:49.999Z,1516733569.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:50.405Z,1516733570.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:50.802Z,1516733570.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:51.195Z,1516733571.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:51.595Z,1516733571.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:52.001Z,1516733572.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:52.394Z,1516733572.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:52.793Z,1516733572.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:55.921Z,1516733575.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:56.054Z,1516733576.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:56.424Z,1516733576.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:56.426Z,1516733576.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:56.431Z,1516733576.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 311 2018-01-23T18:52:56.431Z,1516733576.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:52:56.455Z,1516733576.455 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:52:56.816Z,1516733576.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:56.828Z,1516733576.828 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:52:56.828Z,1516733576.828 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 311 2018-01-23T18:52:57.214Z,1516733577.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:57.215Z,1516733577.215 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:52:57.216Z,1516733577.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:52:57.216Z,1516733577.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:52:57.621Z,1516733577.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:58.022Z,1516733578.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:58.425Z,1516733578.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:58.821Z,1516733578.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:59.220Z,1516733579.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:52:59.621Z,1516733579.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:00.013Z,1516733580.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:00.420Z,1516733580.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:00.813Z,1516733580.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:01.221Z,1516733581.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:01.636Z,1516733581.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:02.025Z,1516733582.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:02.424Z,1516733582.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:02.819Z,1516733582.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:03.220Z,1516733583.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:03.624Z,1516733583.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:04.037Z,1516733584.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:04.437Z,1516733584.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:04.838Z,1516733584.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:05.223Z,1516733585.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:05.629Z,1516733585.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:06.017Z,1516733586.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:06.423Z,1516733586.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:06.821Z,1516733586.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:07.233Z,1516733587.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:07.631Z,1516733587.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:08.024Z,1516733588.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:08.424Z,1516733588.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:08.822Z,1516733588.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:09.221Z,1516733589.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:09.623Z,1516733589.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:10.032Z,1516733590.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:10.429Z,1516733590.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:10.827Z,1516733590.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:11.227Z,1516733591.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:11.621Z,1516733591.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:11.621Z,1516733591.621 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 311 2018-01-23T18:53:11.622Z,1516733591.622 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:53:11.624Z,1516733591.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:11.624Z,1516733591.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 311 2018-01-23T18:53:11.624Z,1516733591.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:53:11.636Z,1516733591.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:53:11.637Z,1516733591.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:53:12.035Z,1516733592.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:53:12.035Z,1516733592.035 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 311 2018-01-23T18:53:12.035Z,1516733592.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:53:12.036Z,1516733592.036 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 311 2018-01-23T18:53:12.425Z,1516733592.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:53:12.425Z,1516733592.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:53:12.426Z,1516733592.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:53:12.426Z,1516733592.426 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:53:12.426Z,1516733592.426 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:53:12.427Z,1516733592.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:53:12.822Z,1516733592.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:53:12.823Z,1516733592.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:13.226Z,1516733593.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:53:13.227Z,1516733593.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:13.630Z,1516733593.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:53:13.631Z,1516733593.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:14.032Z,1516733594.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:53:14.033Z,1516733594.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:14.424Z,1516733594.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:53:14.425Z,1516733594.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:14.825Z,1516733594.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:53:14.825Z,1516733594.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:15.221Z,1516733595.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:53:15.222Z,1516733595.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:15.623Z,1516733595.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:53:15.624Z,1516733595.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:16.036Z,1516733596.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:53:16.037Z,1516733596.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:16.435Z,1516733596.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:53:16.436Z,1516733596.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:16.836Z,1516733596.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:53:16.837Z,1516733596.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:17.228Z,1516733597.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:53:17.229Z,1516733597.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:17.629Z,1516733597.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:53:17.630Z,1516733597.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:18.021Z,1516733598.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:53:18.022Z,1516733598.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:18.430Z,1516733598.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:53:18.431Z,1516733598.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:18.831Z,1516733598.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:53:18.832Z,1516733598.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:19.238Z,1516733599.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:53:19.239Z,1516733599.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:19.648Z,1516733599.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:53:19.649Z,1516733599.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:20.044Z,1516733600.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:53:20.045Z,1516733600.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:20.440Z,1516733600.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:53:20.441Z,1516733600.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:20.816Z,1516733600.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:53:20.817Z,1516733600.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:21.223Z,1516733601.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:53:21.224Z,1516733601.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:21.616Z,1516733601.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:53:21.617Z,1516733601.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:22.021Z,1516733602.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:53:22.022Z,1516733602.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:22.422Z,1516733602.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:53:22.423Z,1516733602.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:22.829Z,1516733602.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:53:22.830Z,1516733602.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:23.215Z,1516733603.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:53:23.216Z,1516733603.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:23.617Z,1516733603.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:53:23.618Z,1516733603.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:24.028Z,1516733604.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:53:24.029Z,1516733604.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:24.416Z,1516733604.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:53:24.417Z,1516733604.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:24.819Z,1516733604.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:53:24.820Z,1516733604.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:25.226Z,1516733605.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:53:25.227Z,1516733605.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:25.626Z,1516733605.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:53:25.627Z,1516733605.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:26.036Z,1516733606.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:53:26.037Z,1516733606.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:26.429Z,1516733606.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:53:26.430Z,1516733606.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:26.827Z,1516733606.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:53:26.828Z,1516733606.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:27.221Z,1516733607.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:53:27.222Z,1516733607.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:27.628Z,1516733607.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:53:27.629Z,1516733607.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:28.017Z,1516733608.017 [PNI_TCM](ERROR): CRC does not match. Expected:0x24040 got:0x47133 2018-01-23T18:53:28.036Z,1516733608.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:53:28.037Z,1516733608.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:28.433Z,1516733608.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:53:28.434Z,1516733608.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:28.836Z,1516733608.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:53:28.837Z,1516733608.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:29.223Z,1516733609.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:53:29.224Z,1516733609.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:29.612Z,1516733609.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:53:29.613Z,1516733609.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:30.005Z,1516733610.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:53:30.006Z,1516733610.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:30.438Z,1516733610.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:53:30.439Z,1516733610.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:30.836Z,1516733610.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:53:30.837Z,1516733610.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:31.208Z,1516733611.208 [PNI_TCM](ERROR): CRC does not match. Expected:0x29039 got:0x54743 2018-01-23T18:53:31.235Z,1516733611.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:53:31.236Z,1516733611.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:31.636Z,1516733611.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:32.030Z,1516733612.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:32.440Z,1516733612.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:32.803Z,1516733612.803 [PNI_TCM](ERROR): CRC does not match. Expected:0x59862 got:0x7618 2018-01-23T18:53:32.834Z,1516733612.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:33.225Z,1516733613.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:33.614Z,1516733613.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:34.040Z,1516733614.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:34.409Z,1516733614.409 [PNI_TCM](ERROR): CRC does not match. Expected:0x5065 got:0x29447 2018-01-23T18:53:34.448Z,1516733614.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:34.817Z,1516733614.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:35.215Z,1516733615.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:35.635Z,1516733615.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:36.014Z,1516733616.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:36.414Z,1516733616.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:36.816Z,1516733616.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:37.229Z,1516733617.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:37.624Z,1516733617.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:38.027Z,1516733618.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:38.415Z,1516733618.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:38.833Z,1516733618.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:39.224Z,1516733619.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:39.619Z,1516733619.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:40.024Z,1516733620.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:40.451Z,1516733620.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:40.816Z,1516733620.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x48028 got:0x34570 2018-01-23T18:53:40.853Z,1516733620.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:41.216Z,1516733621.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:41.614Z,1516733621.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:42.026Z,1516733622.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:42.424Z,1516733622.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:42.818Z,1516733622.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:43.228Z,1516733623.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:43.641Z,1516733623.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:44.019Z,1516733624.019 [PNI_TCM](ERROR): CRC does not match. Expected:0x56979 got:0x49815 2018-01-23T18:53:44.060Z,1516733624.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:44.421Z,1516733624.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:44.827Z,1516733624.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:45.237Z,1516733625.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:45.620Z,1516733625.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:46.030Z,1516733626.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:46.436Z,1516733626.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:46.837Z,1516733626.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:47.227Z,1516733627.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:47.621Z,1516733627.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:48.025Z,1516733628.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:48.427Z,1516733628.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:48.816Z,1516733628.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:49.232Z,1516733629.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:49.634Z,1516733629.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:50.041Z,1516733630.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:50.425Z,1516733630.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:50.820Z,1516733630.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:51.226Z,1516733631.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:51.631Z,1516733631.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:52.031Z,1516733632.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:52.441Z,1516733632.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:52.828Z,1516733632.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:55.915Z,1516733635.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:56.028Z,1516733636.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:56.417Z,1516733636.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:56.814Z,1516733636.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:57.182Z,1516733637.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:57.586Z,1516733637.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:57.982Z,1516733637.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:58.393Z,1516733638.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:58.791Z,1516733638.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:59.190Z,1516733639.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:53:59.594Z,1516733639.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:00.001Z,1516733640.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:00.385Z,1516733640.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:00.789Z,1516733640.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:01.190Z,1516733641.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:01.595Z,1516733641.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:02.001Z,1516733642.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:02.394Z,1516733642.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:02.788Z,1516733642.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:03.188Z,1516733643.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:03.588Z,1516733643.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:03.998Z,1516733643.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:04.393Z,1516733644.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:04.791Z,1516733644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:05.194Z,1516733645.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:05.577Z,1516733645.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:05.993Z,1516733645.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:06.405Z,1516733646.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:06.797Z,1516733646.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:07.194Z,1516733647.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:07.584Z,1516733647.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:07.991Z,1516733647.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:08.403Z,1516733648.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:08.794Z,1516733648.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:09.195Z,1516733649.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:09.593Z,1516733649.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:09.999Z,1516733649.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:10.398Z,1516733650.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:10.802Z,1516733650.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:11.201Z,1516733651.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:11.577Z,1516733651.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:12.010Z,1516733652.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:12.405Z,1516733652.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:12.803Z,1516733652.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:13.182Z,1516733653.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:13.585Z,1516733653.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:13.993Z,1516733653.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:14.398Z,1516733654.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:14.791Z,1516733654.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:15.191Z,1516733655.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:15.598Z,1516733655.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:15.994Z,1516733655.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:16.394Z,1516733656.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:16.789Z,1516733656.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:17.185Z,1516733657.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:17.590Z,1516733657.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:17.983Z,1516733657.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:18.397Z,1516733658.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:18.794Z,1516733658.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:19.190Z,1516733659.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:19.593Z,1516733659.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:19.993Z,1516733659.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:20.388Z,1516733660.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:20.793Z,1516733660.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:21.195Z,1516733661.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:21.603Z,1516733661.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:21.999Z,1516733661.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:22.391Z,1516733662.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:22.784Z,1516733662.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:23.198Z,1516733663.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:23.585Z,1516733663.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:23.996Z,1516733663.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:24.403Z,1516733664.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:24.801Z,1516733664.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:25.202Z,1516733665.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:25.577Z,1516733665.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:25.981Z,1516733665.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:26.377Z,1516733666.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:26.784Z,1516733666.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:27.182Z,1516733667.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:27.599Z,1516733667.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:28.000Z,1516733668.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:28.393Z,1516733668.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:28.801Z,1516733668.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:29.176Z,1516733669.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:29.580Z,1516733669.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:29.979Z,1516733669.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:30.386Z,1516733670.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:30.790Z,1516733670.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:31.212Z,1516733671.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:31.581Z,1516733671.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:31.979Z,1516733671.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:32.379Z,1516733672.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:32.780Z,1516733672.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:33.182Z,1516733673.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:33.586Z,1516733673.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:33.993Z,1516733673.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:34.381Z,1516733674.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:34.779Z,1516733674.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:35.183Z,1516733675.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:35.585Z,1516733675.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:35.981Z,1516733675.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:36.383Z,1516733676.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:36.423Z,1516733676.423 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T18:54:36.787Z,1516733676.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:37.183Z,1516733677.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:37.579Z,1516733677.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:37.979Z,1516733677.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:38.378Z,1516733678.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:38.784Z,1516733678.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:39.186Z,1516733679.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:39.586Z,1516733679.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:39.982Z,1516733679.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:40.391Z,1516733680.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:40.782Z,1516733680.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:41.189Z,1516733681.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:41.584Z,1516733681.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:41.981Z,1516733681.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:42.391Z,1516733682.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:42.794Z,1516733682.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:43.190Z,1516733683.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:43.589Z,1516733683.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:43.989Z,1516733683.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:44.383Z,1516733684.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:44.788Z,1516733684.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:45.197Z,1516733685.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:45.597Z,1516733685.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:46.000Z,1516733686.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:46.381Z,1516733686.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:46.788Z,1516733686.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:47.180Z,1516733687.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:47.585Z,1516733687.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:47.985Z,1516733687.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:48.390Z,1516733688.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:48.794Z,1516733688.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:49.189Z,1516733689.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:49.588Z,1516733689.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:49.982Z,1516733689.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:50.382Z,1516733690.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:50.789Z,1516733690.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:51.189Z,1516733691.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:51.597Z,1516733691.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:52.000Z,1516733692.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:52.003Z,1516733692.003 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T18:54:52.003Z,1516733692.003 [Default:CheckIn:C.Wait] Stopped 2018-01-23T18:54:52.004Z,1516733692.004 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T18:54:52.004Z,1516733692.004 [Default:CheckIn:D] Running Loop=1 2018-01-23T18:54:52.389Z,1516733692.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:52.392Z,1516733692.392 [Default:CheckIn:D] Stopped 2018-01-23T18:54:52.392Z,1516733692.392 [Default:CheckIn:E] Running Loop=1 2018-01-23T18:54:52.787Z,1516733692.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:52.790Z,1516733692.790 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 937.005534 min 2018-01-23T18:54:52.790Z,1516733692.790 [Default:CheckIn:E] Stopped 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn] Stopped 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn](INFO): Running loop #92 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn] Running Loop=92 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T18:54:52.791Z,1516733692.791 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T18:54:53.193Z,1516733693.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:56.449Z,1516733696.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:56.585Z,1516733696.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:56.953Z,1516733696.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:57.357Z,1516733697.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:57.749Z,1516733697.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:58.145Z,1516733698.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:58.532Z,1516733698.532 [PNI_TCM](ERROR): CRC does not match. Expected:0x19361 got:0x7233 2018-01-23T18:54:58.553Z,1516733698.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:58.960Z,1516733698.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:59.353Z,1516733699.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:54:59.750Z,1516733699.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:00.156Z,1516733700.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:00.560Z,1516733700.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:00.943Z,1516733700.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:01.341Z,1516733701.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:01.736Z,1516733701.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:02.151Z,1516733702.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:02.550Z,1516733702.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:02.948Z,1516733702.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:03.340Z,1516733703.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:03.742Z,1516733703.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:04.148Z,1516733704.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:04.550Z,1516733704.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:04.943Z,1516733704.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:05.353Z,1516733705.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:05.769Z,1516733705.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:06.160Z,1516733706.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:06.528Z,1516733706.528 [PNI_TCM](ERROR): CRC does not match. Expected:0x4539 got:0x53217 2018-01-23T18:55:06.564Z,1516733706.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:06.964Z,1516733706.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:07.328Z,1516733707.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:07.745Z,1516733707.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:08.154Z,1516733708.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:08.577Z,1516733708.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:08.955Z,1516733708.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:09.350Z,1516733709.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:09.746Z,1516733709.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:10.163Z,1516733710.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:10.542Z,1516733710.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:10.951Z,1516733710.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:11.353Z,1516733711.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:11.766Z,1516733711.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:12.162Z,1516733712.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:12.547Z,1516733712.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:12.941Z,1516733712.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:13.324Z,1516733713.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:13.725Z,1516733713.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:14.169Z,1516733714.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:14.565Z,1516733714.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:14.977Z,1516733714.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:15.358Z,1516733715.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:15.729Z,1516733715.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:16.128Z,1516733716.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:16.541Z,1516733716.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:16.938Z,1516733716.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:17.339Z,1516733717.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:17.743Z,1516733717.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:18.142Z,1516733718.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:18.542Z,1516733718.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:18.934Z,1516733718.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:19.336Z,1516733719.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:19.735Z,1516733719.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:20.150Z,1516733720.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:20.546Z,1516733720.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:20.946Z,1516733720.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:21.334Z,1516733721.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:21.743Z,1516733721.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:22.143Z,1516733722.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:22.554Z,1516733722.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:22.946Z,1516733722.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:23.339Z,1516733723.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:23.749Z,1516733723.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:24.143Z,1516733724.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:24.553Z,1516733724.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:24.951Z,1516733724.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:25.339Z,1516733725.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:25.746Z,1516733725.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:26.143Z,1516733726.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:26.546Z,1516733726.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:26.946Z,1516733726.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:27.344Z,1516733727.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:27.735Z,1516733727.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:28.153Z,1516733728.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:28.547Z,1516733728.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:28.949Z,1516733728.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:29.339Z,1516733729.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:29.745Z,1516733729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:30.146Z,1516733730.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:30.558Z,1516733730.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:30.948Z,1516733730.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:31.335Z,1516733731.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:31.741Z,1516733731.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:32.149Z,1516733732.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:32.553Z,1516733732.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:32.945Z,1516733732.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:33.346Z,1516733733.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:33.734Z,1516733733.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:34.154Z,1516733734.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:34.548Z,1516733734.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:34.945Z,1516733734.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:35.340Z,1516733735.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:35.752Z,1516733735.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:36.148Z,1516733736.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:36.553Z,1516733736.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:36.953Z,1516733736.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:37.345Z,1516733737.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:37.744Z,1516733737.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:38.157Z,1516733738.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:38.551Z,1516733738.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:38.953Z,1516733738.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:39.357Z,1516733739.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:39.728Z,1516733739.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:40.152Z,1516733740.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:40.555Z,1516733740.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:40.952Z,1516733740.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:41.356Z,1516733741.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:41.728Z,1516733741.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:42.138Z,1516733742.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:42.564Z,1516733742.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:42.941Z,1516733742.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:43.335Z,1516733743.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:43.732Z,1516733743.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:44.134Z,1516733744.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:44.545Z,1516733744.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:44.938Z,1516733744.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:45.333Z,1516733745.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:45.733Z,1516733745.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:46.141Z,1516733746.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:46.542Z,1516733746.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:46.949Z,1516733746.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:47.332Z,1516733747.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:47.745Z,1516733747.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:48.141Z,1516733748.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:48.549Z,1516733748.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:48.942Z,1516733748.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:49.338Z,1516733749.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:49.748Z,1516733749.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:50.158Z,1516733750.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:50.556Z,1516733750.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:50.948Z,1516733750.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:51.350Z,1516733751.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:51.744Z,1516733751.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:52.145Z,1516733752.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:52.551Z,1516733752.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:52.953Z,1516733752.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:53.349Z,1516733753.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:56.453Z,1516733756.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:56.588Z,1516733756.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:56.930Z,1516733756.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:57.357Z,1516733757.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:57.359Z,1516733757.359 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:57.359Z,1516733757.359 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 312 2018-01-23T18:55:57.359Z,1516733757.359 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:55:57.371Z,1516733757.371 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:55:57.721Z,1516733757.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:57.734Z,1516733757.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:55:57.734Z,1516733757.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 312 2018-01-23T18:55:58.119Z,1516733758.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:58.120Z,1516733758.120 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:55:58.120Z,1516733758.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:55:58.121Z,1516733758.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:55:58.521Z,1516733758.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:58.925Z,1516733758.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:59.327Z,1516733759.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:55:59.731Z,1516733759.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:00.125Z,1516733760.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:00.519Z,1516733760.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:00.920Z,1516733760.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:01.318Z,1516733761.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:01.720Z,1516733761.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:02.120Z,1516733762.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:02.529Z,1516733762.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:02.930Z,1516733762.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:03.360Z,1516733763.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:03.718Z,1516733763.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:04.130Z,1516733764.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:04.530Z,1516733764.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:04.920Z,1516733764.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:05.359Z,1516733765.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:05.730Z,1516733765.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:06.132Z,1516733766.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:06.532Z,1516733766.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:06.925Z,1516733766.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:07.332Z,1516733767.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:07.730Z,1516733767.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:08.121Z,1516733768.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:08.533Z,1516733768.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:08.934Z,1516733768.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:09.332Z,1516733769.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:09.722Z,1516733769.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:10.131Z,1516733770.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:10.522Z,1516733770.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:10.929Z,1516733770.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:11.341Z,1516733771.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:11.736Z,1516733771.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:12.130Z,1516733772.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:12.533Z,1516733772.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:12.533Z,1516733772.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 312 2018-01-23T18:56:12.533Z,1516733772.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:56:12.539Z,1516733772.539 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:12.539Z,1516733772.539 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 312 2018-01-23T18:56:12.539Z,1516733772.539 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:56:12.569Z,1516733772.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:56:12.569Z,1516733772.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:56:12.945Z,1516733772.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:56:12.945Z,1516733772.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 312 2018-01-23T18:56:12.946Z,1516733772.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:56:12.946Z,1516733772.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 312 2018-01-23T18:56:13.328Z,1516733773.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:56:13.328Z,1516733773.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:56:13.329Z,1516733773.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:56:13.329Z,1516733773.329 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:56:13.329Z,1516733773.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:56:13.330Z,1516733773.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:56:13.743Z,1516733773.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:56:13.744Z,1516733773.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:14.145Z,1516733774.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:56:14.146Z,1516733774.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:14.522Z,1516733774.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:56:14.539Z,1516733774.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:14.946Z,1516733774.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:56:14.947Z,1516733774.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:15.330Z,1516733775.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:56:15.347Z,1516733775.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:15.718Z,1516733775.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:56:15.720Z,1516733775.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:16.121Z,1516733776.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:56:16.122Z,1516733776.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:16.521Z,1516733776.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:56:16.522Z,1516733776.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:16.929Z,1516733776.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:56:16.930Z,1516733776.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:17.337Z,1516733777.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:56:17.338Z,1516733777.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:17.732Z,1516733777.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:56:17.733Z,1516733777.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:18.129Z,1516733778.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:56:18.130Z,1516733778.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:18.520Z,1516733778.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:56:18.521Z,1516733778.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:18.920Z,1516733778.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:56:18.921Z,1516733778.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:19.326Z,1516733779.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:56:19.327Z,1516733779.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:19.723Z,1516733779.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:56:19.724Z,1516733779.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:20.120Z,1516733780.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:56:20.121Z,1516733780.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:20.529Z,1516733780.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:56:20.530Z,1516733780.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:20.936Z,1516733780.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:56:20.937Z,1516733780.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:21.330Z,1516733781.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:56:21.331Z,1516733781.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:21.721Z,1516733781.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:56:21.722Z,1516733781.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:22.120Z,1516733782.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:56:22.121Z,1516733782.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:22.524Z,1516733782.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:56:22.525Z,1516733782.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:22.922Z,1516733782.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:56:22.923Z,1516733782.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:23.329Z,1516733783.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:56:23.330Z,1516733783.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:23.740Z,1516733783.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:56:23.741Z,1516733783.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:24.129Z,1516733784.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:56:24.130Z,1516733784.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:24.532Z,1516733784.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:56:24.533Z,1516733784.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:24.928Z,1516733784.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:56:24.929Z,1516733784.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:25.318Z,1516733785.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:56:25.319Z,1516733785.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:25.737Z,1516733785.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:56:25.738Z,1516733785.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:26.132Z,1516733786.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:56:26.133Z,1516733786.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:26.540Z,1516733786.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:56:26.541Z,1516733786.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:26.934Z,1516733786.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:56:26.935Z,1516733786.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:27.351Z,1516733787.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:56:27.352Z,1516733787.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:27.724Z,1516733787.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:56:27.725Z,1516733787.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:28.125Z,1516733788.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:56:28.126Z,1516733788.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:28.532Z,1516733788.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:56:28.533Z,1516733788.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:28.924Z,1516733788.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:56:28.925Z,1516733788.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:29.334Z,1516733789.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:56:29.339Z,1516733789.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:29.738Z,1516733789.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:56:29.739Z,1516733789.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:30.131Z,1516733790.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:56:30.132Z,1516733790.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:30.524Z,1516733790.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:56:30.525Z,1516733790.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:30.923Z,1516733790.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:56:30.923Z,1516733790.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:31.321Z,1516733791.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:56:31.322Z,1516733791.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:31.726Z,1516733791.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:56:31.728Z,1516733791.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:32.134Z,1516733792.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:56:32.135Z,1516733792.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:32.534Z,1516733792.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:32.934Z,1516733792.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:33.332Z,1516733793.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:33.726Z,1516733793.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:34.137Z,1516733794.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:34.529Z,1516733794.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:34.930Z,1516733794.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:35.334Z,1516733795.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:35.748Z,1516733795.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:36.143Z,1516733796.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:36.528Z,1516733796.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:36.933Z,1516733796.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:37.318Z,1516733797.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:37.729Z,1516733797.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:38.145Z,1516733798.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:38.541Z,1516733798.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:38.945Z,1516733798.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:39.385Z,1516733799.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:39.713Z,1516733799.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:40.156Z,1516733800.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:40.564Z,1516733800.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:40.950Z,1516733800.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:41.371Z,1516733801.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:41.802Z,1516733801.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:42.154Z,1516733802.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:42.552Z,1516733802.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:42.932Z,1516733802.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:43.341Z,1516733803.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:43.722Z,1516733803.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:44.140Z,1516733804.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:44.563Z,1516733804.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:44.994Z,1516733804.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:45.381Z,1516733805.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:45.764Z,1516733805.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:46.148Z,1516733806.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:46.606Z,1516733806.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:46.973Z,1516733806.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:47.380Z,1516733807.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:47.777Z,1516733807.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:48.153Z,1516733808.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:48.542Z,1516733808.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:48.956Z,1516733808.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:49.349Z,1516733809.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:49.748Z,1516733809.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:50.168Z,1516733810.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:50.557Z,1516733810.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:50.959Z,1516733810.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:51.403Z,1516733811.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:51.732Z,1516733811.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:52.126Z,1516733812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:52.533Z,1516733812.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:52.930Z,1516733812.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:53.350Z,1516733813.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:53.754Z,1516733813.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:59.637Z,1516733819.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:56:59.777Z,1516733819.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:00.125Z,1516733820.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:00.506Z,1516733820.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:00.909Z,1516733820.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:01.329Z,1516733821.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:01.713Z,1516733821.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:02.118Z,1516733822.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:02.514Z,1516733822.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:02.910Z,1516733822.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:03.382Z,1516733823.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:03.712Z,1516733823.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:04.104Z,1516733824.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:04.513Z,1516733824.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:04.910Z,1516733824.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:05.342Z,1516733825.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:05.707Z,1516733825.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:06.200Z,1516733826.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:06.504Z,1516733826.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:06.903Z,1516733826.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:07.313Z,1516733827.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:07.709Z,1516733827.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:08.113Z,1516733828.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:08.507Z,1516733828.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:08.915Z,1516733828.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:09.315Z,1516733829.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:09.717Z,1516733829.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:10.120Z,1516733830.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:10.505Z,1516733830.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:10.904Z,1516733830.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:11.305Z,1516733831.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:11.717Z,1516733831.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:12.112Z,1516733832.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:12.515Z,1516733832.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:12.913Z,1516733832.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:13.321Z,1516733833.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:13.706Z,1516733833.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:14.110Z,1516733834.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:14.511Z,1516733834.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:14.905Z,1516733834.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:15.316Z,1516733835.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:15.723Z,1516733835.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:16.125Z,1516733836.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:16.509Z,1516733836.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:16.904Z,1516733836.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:17.314Z,1516733837.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:17.721Z,1516733837.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:18.113Z,1516733838.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:18.508Z,1516733838.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:18.911Z,1516733838.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:19.313Z,1516733839.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:19.717Z,1516733839.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:20.113Z,1516733840.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:20.512Z,1516733840.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:20.912Z,1516733840.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:21.313Z,1516733841.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:21.718Z,1516733841.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:22.120Z,1516733842.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:22.508Z,1516733842.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:22.905Z,1516733842.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:23.315Z,1516733843.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:23.713Z,1516733843.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:24.113Z,1516733844.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:24.505Z,1516733844.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:24.905Z,1516733844.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:25.317Z,1516733845.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:25.717Z,1516733845.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:26.114Z,1516733846.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:26.507Z,1516733846.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:26.905Z,1516733846.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:27.316Z,1516733847.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:27.717Z,1516733847.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:28.120Z,1516733848.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:28.510Z,1516733848.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:28.915Z,1516733848.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:29.316Z,1516733849.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:29.718Z,1516733849.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:30.117Z,1516733850.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:30.513Z,1516733850.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:30.913Z,1516733850.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:31.315Z,1516733851.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:31.718Z,1516733851.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:32.115Z,1516733852.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:32.512Z,1516733852.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:32.914Z,1516733852.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:33.315Z,1516733853.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:33.717Z,1516733853.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:34.122Z,1516733854.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:34.512Z,1516733854.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:34.909Z,1516733854.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:35.317Z,1516733855.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:35.722Z,1516733855.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:36.118Z,1516733856.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:36.508Z,1516733856.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:36.909Z,1516733856.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:37.314Z,1516733857.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:37.724Z,1516733857.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:38.115Z,1516733858.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:38.512Z,1516733858.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:38.915Z,1516733858.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:39.315Z,1516733859.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:39.729Z,1516733859.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:40.118Z,1516733860.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:40.511Z,1516733860.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:40.913Z,1516733860.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:41.323Z,1516733861.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:41.734Z,1516733861.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:42.118Z,1516733862.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:42.522Z,1516733862.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:42.911Z,1516733862.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:43.321Z,1516733863.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:43.740Z,1516733863.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:44.127Z,1516733864.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:44.511Z,1516733864.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:44.913Z,1516733864.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:45.315Z,1516733865.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:45.719Z,1516733865.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:46.120Z,1516733866.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:46.501Z,1516733866.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:46.912Z,1516733866.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:47.294Z,1516733867.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:47.722Z,1516733867.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:48.133Z,1516733868.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:48.533Z,1516733868.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:48.925Z,1516733868.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:49.309Z,1516733869.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:49.706Z,1516733869.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:50.107Z,1516733870.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:50.507Z,1516733870.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:50.910Z,1516733870.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:51.307Z,1516733871.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:51.703Z,1516733871.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:52.108Z,1516733872.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:52.502Z,1516733872.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:52.902Z,1516733872.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:53.309Z,1516733873.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:53.733Z,1516733873.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:54.133Z,1516733874.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:57.352Z,1516733877.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:57.492Z,1516733877.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:57.843Z,1516733877.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:58.250Z,1516733878.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:58.645Z,1516733878.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:59.043Z,1516733879.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:59.456Z,1516733879.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:57:59.851Z,1516733879.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:00.256Z,1516733880.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:00.641Z,1516733880.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:01.045Z,1516733881.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:01.444Z,1516733881.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:01.852Z,1516733881.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:02.238Z,1516733882.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:02.647Z,1516733882.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:03.051Z,1516733883.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:03.450Z,1516733883.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:03.845Z,1516733883.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:04.251Z,1516733884.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:04.630Z,1516733884.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:05.030Z,1516733885.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:05.453Z,1516733885.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:05.869Z,1516733885.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:06.259Z,1516733886.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:06.660Z,1516733886.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:07.041Z,1516733887.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:07.445Z,1516733887.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:07.837Z,1516733887.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:08.233Z,1516733888.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:08.638Z,1516733888.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:09.041Z,1516733889.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:09.438Z,1516733889.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:09.837Z,1516733889.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:10.240Z,1516733890.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:10.636Z,1516733890.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:11.038Z,1516733891.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:11.446Z,1516733891.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:11.853Z,1516733891.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:12.250Z,1516733892.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:12.644Z,1516733892.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:13.041Z,1516733893.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:13.441Z,1516733893.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:13.840Z,1516733893.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:14.241Z,1516733894.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:14.653Z,1516733894.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:15.050Z,1516733895.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:15.456Z,1516733895.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:15.841Z,1516733895.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:16.241Z,1516733896.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:16.644Z,1516733896.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:17.041Z,1516733897.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:17.461Z,1516733897.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:17.854Z,1516733897.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:18.250Z,1516733898.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:18.646Z,1516733898.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:19.045Z,1516733899.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:19.445Z,1516733899.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:19.851Z,1516733899.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:20.242Z,1516733900.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:20.652Z,1516733900.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:21.052Z,1516733901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:21.450Z,1516733901.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:21.845Z,1516733901.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:22.251Z,1516733902.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:22.649Z,1516733902.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:23.047Z,1516733903.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:23.461Z,1516733903.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:23.851Z,1516733903.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:24.256Z,1516733904.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:24.650Z,1516733904.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:25.025Z,1516733905.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:25.449Z,1516733905.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:25.833Z,1516733905.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:26.225Z,1516733906.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:26.680Z,1516733906.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:27.061Z,1516733907.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:27.450Z,1516733907.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:27.853Z,1516733907.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:28.256Z,1516733908.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:28.652Z,1516733908.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:29.057Z,1516733909.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:29.464Z,1516733909.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:29.864Z,1516733909.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:30.260Z,1516733910.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:30.665Z,1516733910.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:31.033Z,1516733911.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:31.435Z,1516733911.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:31.837Z,1516733911.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:32.237Z,1516733912.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:32.645Z,1516733912.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:33.045Z,1516733913.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:33.446Z,1516733913.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:33.835Z,1516733913.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:34.244Z,1516733914.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:34.648Z,1516733914.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:35.045Z,1516733915.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:35.451Z,1516733915.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:35.853Z,1516733915.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:36.260Z,1516733916.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:36.652Z,1516733916.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:37.047Z,1516733917.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:37.452Z,1516733917.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:37.860Z,1516733917.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:38.247Z,1516733918.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:38.630Z,1516733918.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:39.053Z,1516733919.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:39.458Z,1516733919.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:39.862Z,1516733919.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:40.261Z,1516733920.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:40.641Z,1516733920.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:41.037Z,1516733921.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:41.443Z,1516733921.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:41.843Z,1516733921.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:42.239Z,1516733922.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:42.637Z,1516733922.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:43.035Z,1516733923.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:43.439Z,1516733923.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:43.843Z,1516733923.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:44.238Z,1516733924.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:44.636Z,1516733924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:45.037Z,1516733925.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:45.440Z,1516733925.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:45.842Z,1516733925.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:46.250Z,1516733926.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:46.636Z,1516733926.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:47.035Z,1516733927.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:47.448Z,1516733927.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:47.849Z,1516733927.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:48.249Z,1516733928.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:48.636Z,1516733928.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:49.036Z,1516733929.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:49.445Z,1516733929.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:49.845Z,1516733929.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:50.249Z,1516733930.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:50.645Z,1516733930.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:51.040Z,1516733931.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:51.446Z,1516733931.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:51.850Z,1516733931.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:52.252Z,1516733932.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:52.646Z,1516733932.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:53.041Z,1516733933.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:53.448Z,1516733933.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:53.857Z,1516733933.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:54.258Z,1516733934.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:57.384Z,1516733937.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:57.512Z,1516733937.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:57.888Z,1516733937.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:58.291Z,1516733938.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:58.293Z,1516733938.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:58.293Z,1516733938.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 313 2018-01-23T18:58:58.293Z,1516733938.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T18:58:58.305Z,1516733938.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T18:58:58.674Z,1516733938.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:58.707Z,1516733938.707 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T18:58:58.707Z,1516733938.707 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 313 2018-01-23T18:58:59.070Z,1516733939.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:59.072Z,1516733939.072 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T18:58:59.072Z,1516733939.072 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:58:59.072Z,1516733939.072 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:58:59.469Z,1516733939.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:58:59.881Z,1516733939.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:00.275Z,1516733940.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:00.684Z,1516733940.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:01.082Z,1516733941.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:01.486Z,1516733941.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:01.873Z,1516733941.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:02.277Z,1516733942.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:02.671Z,1516733942.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:03.068Z,1516733943.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:03.485Z,1516733943.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:03.885Z,1516733943.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:04.282Z,1516733944.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:04.685Z,1516733944.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:05.075Z,1516733945.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:05.479Z,1516733945.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:05.889Z,1516733945.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:06.281Z,1516733946.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:06.672Z,1516733946.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:07.077Z,1516733947.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:07.487Z,1516733947.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:07.896Z,1516733947.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:08.281Z,1516733948.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:08.675Z,1516733948.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:09.079Z,1516733949.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:09.477Z,1516733949.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:09.885Z,1516733949.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:10.290Z,1516733950.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:10.670Z,1516733950.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:11.075Z,1516733951.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:11.485Z,1516733951.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:11.881Z,1516733951.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:12.279Z,1516733952.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:12.685Z,1516733952.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:13.081Z,1516733953.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:13.493Z,1516733953.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:13.493Z,1516733953.493 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 313 2018-01-23T18:59:13.493Z,1516733953.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T18:59:13.495Z,1516733953.495 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:13.495Z,1516733953.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 313 2018-01-23T18:59:13.495Z,1516733953.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T18:59:13.532Z,1516733953.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T18:59:13.532Z,1516733953.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T18:59:13.893Z,1516733953.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T18:59:13.893Z,1516733953.893 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 313 2018-01-23T18:59:13.893Z,1516733953.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T18:59:13.894Z,1516733953.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 313 2018-01-23T18:59:14.279Z,1516733954.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T18:59:14.279Z,1516733954.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:59:14.280Z,1516733954.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:59:14.280Z,1516733954.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T18:59:14.281Z,1516733954.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T18:59:14.281Z,1516733954.281 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T18:59:14.680Z,1516733954.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T18:59:14.680Z,1516733954.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:15.088Z,1516733955.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T18:59:15.089Z,1516733955.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:15.484Z,1516733955.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T18:59:15.485Z,1516733955.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:15.891Z,1516733955.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T18:59:15.892Z,1516733955.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:16.284Z,1516733956.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T18:59:16.285Z,1516733956.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:16.680Z,1516733956.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T18:59:16.681Z,1516733956.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:17.088Z,1516733957.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T18:59:17.089Z,1516733957.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:17.490Z,1516733957.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T18:59:17.491Z,1516733957.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:17.896Z,1516733957.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T18:59:17.897Z,1516733957.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:18.296Z,1516733958.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T18:59:18.297Z,1516733958.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:18.663Z,1516733958.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T18:59:18.664Z,1516733958.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:19.068Z,1516733959.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T18:59:19.069Z,1516733959.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:19.478Z,1516733959.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T18:59:19.495Z,1516733959.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:19.873Z,1516733959.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T18:59:19.874Z,1516733959.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:20.270Z,1516733960.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T18:59:20.271Z,1516733960.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:20.668Z,1516733960.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T18:59:20.669Z,1516733960.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:21.072Z,1516733961.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T18:59:21.073Z,1516733961.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:21.499Z,1516733961.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T18:59:21.500Z,1516733961.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:21.874Z,1516733961.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T18:59:21.875Z,1516733961.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:22.276Z,1516733962.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T18:59:22.277Z,1516733962.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:22.669Z,1516733962.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T18:59:22.670Z,1516733962.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:23.072Z,1516733963.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T18:59:23.073Z,1516733963.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:23.470Z,1516733963.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T18:59:23.471Z,1516733963.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:23.899Z,1516733963.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T18:59:23.900Z,1516733963.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:24.270Z,1516733964.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T18:59:24.271Z,1516733964.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:24.668Z,1516733964.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T18:59:24.669Z,1516733964.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:25.064Z,1516733965.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T18:59:25.065Z,1516733965.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:25.473Z,1516733965.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T18:59:25.474Z,1516733965.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:25.873Z,1516733965.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T18:59:25.874Z,1516733965.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:26.274Z,1516733966.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T18:59:26.276Z,1516733966.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:26.673Z,1516733966.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T18:59:26.674Z,1516733966.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:27.067Z,1516733967.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T18:59:27.068Z,1516733967.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:27.476Z,1516733967.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T18:59:27.477Z,1516733967.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:27.874Z,1516733967.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T18:59:27.875Z,1516733967.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:28.276Z,1516733968.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T18:59:28.277Z,1516733968.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:28.666Z,1516733968.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T18:59:28.667Z,1516733968.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:29.075Z,1516733969.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T18:59:29.076Z,1516733969.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:29.467Z,1516733969.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T18:59:29.468Z,1516733969.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:29.877Z,1516733969.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T18:59:29.877Z,1516733969.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:30.277Z,1516733970.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T18:59:30.277Z,1516733970.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:30.684Z,1516733970.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T18:59:30.685Z,1516733970.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:31.066Z,1516733971.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T18:59:31.067Z,1516733971.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:31.473Z,1516733971.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T18:59:31.474Z,1516733971.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:31.872Z,1516733971.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T18:59:31.873Z,1516733971.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:32.273Z,1516733972.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T18:59:32.274Z,1516733972.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:32.670Z,1516733972.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T18:59:32.671Z,1516733972.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:33.075Z,1516733973.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T18:59:33.076Z,1516733973.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:33.477Z,1516733973.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T18:59:33.479Z,1516733973.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:33.873Z,1516733973.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:34.273Z,1516733974.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:34.674Z,1516733974.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:35.073Z,1516733975.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:35.477Z,1516733975.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:35.875Z,1516733975.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:36.274Z,1516733976.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:36.703Z,1516733976.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:37.066Z,1516733977.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:37.476Z,1516733977.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:37.870Z,1516733977.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:38.268Z,1516733978.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:38.680Z,1516733978.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:39.079Z,1516733979.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:39.482Z,1516733979.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:39.868Z,1516733979.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:40.270Z,1516733980.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:40.670Z,1516733980.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:41.078Z,1516733981.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:41.468Z,1516733981.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:41.878Z,1516733981.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:42.277Z,1516733982.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:42.690Z,1516733982.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:43.073Z,1516733983.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:43.473Z,1516733983.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:43.872Z,1516733983.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:44.276Z,1516733984.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:44.680Z,1516733984.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:45.088Z,1516733985.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:45.480Z,1516733985.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:45.873Z,1516733985.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:46.275Z,1516733986.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:46.678Z,1516733986.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:47.078Z,1516733987.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:47.482Z,1516733987.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:47.889Z,1516733987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:48.282Z,1516733988.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:48.694Z,1516733988.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:49.074Z,1516733989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:49.473Z,1516733989.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:49.875Z,1516733989.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:50.278Z,1516733990.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:50.688Z,1516733990.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:51.092Z,1516733991.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:51.478Z,1516733991.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:51.869Z,1516733991.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:52.273Z,1516733992.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:52.711Z,1516733992.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:53.073Z,1516733993.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:53.077Z,1516733993.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T18:54:52.8Z 2018-01-23T18:59:53.077Z,1516733993.077 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T18:59:53.077Z,1516733993.077 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T18:59:53.479Z,1516733993.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:54.025Z,1516733994.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:54.282Z,1516733994.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:57.444Z,1516733997.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:57.531Z,1516733997.531 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0368.lzma 2018-01-23T18:59:57.598Z,1516733997.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:57.940Z,1516733997.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:58.298Z,1516733998.298 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0368.lzma.bak 2018-01-23T18:59:58.298Z,1516733998.298 [DataOverHttps](INFO): SBD MOMSN=7756470 2018-01-23T18:59:58.373Z,1516733998.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:58.985Z,1516733998.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T18:59:59.145Z,1516733999.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:02.276Z,1516734002.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:02.401Z,1516734002.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:02.743Z,1516734002.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:03.145Z,1516734003.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:03.542Z,1516734003.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:03.941Z,1516734003.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:07.035Z,1516734007.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:07.115Z,1516734007.115 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0369.lzma 2018-01-23T19:00:07.193Z,1516734007.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:07.519Z,1516734007.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:12.185Z,1516734012.185 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0369.lzma.bak 2018-01-23T19:00:12.185Z,1516734012.185 [DataOverHttps](INFO): SBD MOMSN=7756473 2018-01-23T19:00:12.253Z,1516734012.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:12.629Z,1516734012.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:12.632Z,1516734012.632 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:00:12.632Z,1516734012.632 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:00:12.632Z,1516734012.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:00:12.773Z,1516734012.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:15.846Z,1516734015.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:16.005Z,1516734016.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:16.350Z,1516734016.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:16.757Z,1516734016.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:17.137Z,1516734017.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:17.559Z,1516734017.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:17.944Z,1516734017.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:18.347Z,1516734018.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:18.751Z,1516734018.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:19.154Z,1516734019.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:19.551Z,1516734019.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:19.947Z,1516734019.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:20.351Z,1516734020.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:20.746Z,1516734020.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:21.141Z,1516734021.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:21.548Z,1516734021.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:21.953Z,1516734021.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:22.353Z,1516734022.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:22.752Z,1516734022.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:23.137Z,1516734023.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:23.550Z,1516734023.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:23.958Z,1516734023.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:24.330Z,1516734024.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:24.757Z,1516734024.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:25.166Z,1516734025.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:25.559Z,1516734025.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:25.964Z,1516734025.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:26.369Z,1516734026.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:26.741Z,1516734026.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:27.141Z,1516734027.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:27.546Z,1516734027.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:27.943Z,1516734027.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:28.376Z,1516734028.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:28.746Z,1516734028.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:29.146Z,1516734029.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:29.541Z,1516734029.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:29.944Z,1516734029.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:30.339Z,1516734030.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:30.775Z,1516734030.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:31.157Z,1516734031.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:31.557Z,1516734031.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:31.943Z,1516734031.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:32.348Z,1516734032.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:32.743Z,1516734032.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:33.150Z,1516734033.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:33.548Z,1516734033.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:33.961Z,1516734033.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:34.357Z,1516734034.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:34.754Z,1516734034.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:35.141Z,1516734035.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:35.549Z,1516734035.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:35.952Z,1516734035.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:36.356Z,1516734036.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:36.752Z,1516734036.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:37.154Z,1516734037.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:37.557Z,1516734037.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:37.949Z,1516734037.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:38.351Z,1516734038.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:38.742Z,1516734038.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:39.148Z,1516734039.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:39.543Z,1516734039.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:39.954Z,1516734039.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:40.353Z,1516734040.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:40.748Z,1516734040.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:41.147Z,1516734041.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:41.542Z,1516734041.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:41.944Z,1516734041.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:42.341Z,1516734042.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:42.764Z,1516734042.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:43.168Z,1516734043.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:43.554Z,1516734043.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:43.955Z,1516734043.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:44.357Z,1516734044.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:44.753Z,1516734044.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:45.145Z,1516734045.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:45.531Z,1516734045.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:45.959Z,1516734045.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:46.369Z,1516734046.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:46.755Z,1516734046.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:47.159Z,1516734047.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:47.540Z,1516734047.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:47.940Z,1516734047.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:48.361Z,1516734048.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:48.746Z,1516734048.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:49.145Z,1516734049.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:49.561Z,1516734049.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:49.942Z,1516734049.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:50.353Z,1516734050.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:50.747Z,1516734050.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:51.262Z,1516734051.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:51.547Z,1516734051.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:51.947Z,1516734051.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:52.369Z,1516734052.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:52.759Z,1516734052.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:53.150Z,1516734053.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:53.556Z,1516734053.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:53.961Z,1516734053.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:54.329Z,1516734054.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:54.762Z,1516734054.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:55.165Z,1516734055.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:55.554Z,1516734055.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:55.961Z,1516734055.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:56.343Z,1516734056.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:56.736Z,1516734056.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:57.145Z,1516734057.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:57.557Z,1516734057.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:57.961Z,1516734057.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:58.362Z,1516734058.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:58.762Z,1516734058.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:59.138Z,1516734059.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:59.545Z,1516734059.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:00:59.944Z,1516734059.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:00.339Z,1516734060.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:00.742Z,1516734060.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:01.167Z,1516734061.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:01.543Z,1516734061.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:01.945Z,1516734061.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:02.342Z,1516734062.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:02.744Z,1516734062.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:03.147Z,1516734063.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:03.540Z,1516734063.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:03.947Z,1516734063.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:04.369Z,1516734064.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:04.768Z,1516734064.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:05.144Z,1516734065.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:05.546Z,1516734065.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:05.944Z,1516734065.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:06.342Z,1516734066.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:06.774Z,1516734066.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:07.153Z,1516734067.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:07.545Z,1516734067.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:07.953Z,1516734067.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:08.344Z,1516734068.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:08.739Z,1516734068.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:09.153Z,1516734069.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:09.545Z,1516734069.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:09.957Z,1516734069.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:10.354Z,1516734070.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:10.754Z,1516734070.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:11.143Z,1516734071.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:11.561Z,1516734071.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:11.950Z,1516734071.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:12.342Z,1516734072.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:12.755Z,1516734072.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:13.168Z,1516734073.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:16.257Z,1516734076.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:16.394Z,1516734076.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:16.741Z,1516734076.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:17.154Z,1516734077.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:17.528Z,1516734077.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:17.953Z,1516734077.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:18.333Z,1516734078.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:18.749Z,1516734078.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:19.135Z,1516734079.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:19.526Z,1516734079.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:19.927Z,1516734079.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:20.354Z,1516734080.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:20.730Z,1516734080.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:21.133Z,1516734081.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:21.529Z,1516734081.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:21.937Z,1516734081.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:22.328Z,1516734082.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:22.730Z,1516734082.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:23.131Z,1516734083.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:23.548Z,1516734083.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:23.936Z,1516734083.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:24.333Z,1516734084.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:24.736Z,1516734084.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:25.161Z,1516734085.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:25.528Z,1516734085.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:25.946Z,1516734085.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:26.338Z,1516734086.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:26.747Z,1516734086.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:27.144Z,1516734087.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:27.538Z,1516734087.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:27.932Z,1516734087.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:28.343Z,1516734088.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:28.729Z,1516734088.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:29.140Z,1516734089.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:29.532Z,1516734089.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:29.938Z,1516734089.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:30.355Z,1516734090.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:30.739Z,1516734090.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:31.145Z,1516734091.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:31.541Z,1516734091.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:31.932Z,1516734091.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:32.328Z,1516734092.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:32.745Z,1516734092.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:33.172Z,1516734093.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:33.536Z,1516734093.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:33.930Z,1516734093.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:34.325Z,1516734094.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:34.731Z,1516734094.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:35.138Z,1516734095.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:35.521Z,1516734095.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:35.942Z,1516734095.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:36.350Z,1516734096.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:36.743Z,1516734096.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:37.138Z,1516734097.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:37.541Z,1516734097.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:37.932Z,1516734097.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:38.340Z,1516734098.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:38.758Z,1516734098.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:39.166Z,1516734099.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:39.598Z,1516734099.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:39.960Z,1516734099.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:40.350Z,1516734100.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:40.762Z,1516734100.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:41.160Z,1516734101.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:41.568Z,1516734101.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:41.992Z,1516734101.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:42.395Z,1516734102.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:42.785Z,1516734102.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:43.140Z,1516734103.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:43.556Z,1516734103.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:43.916Z,1516734103.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:44.354Z,1516734104.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:44.768Z,1516734104.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:45.174Z,1516734105.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:45.602Z,1516734105.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:46.001Z,1516734106.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:46.376Z,1516734106.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:46.730Z,1516734106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:47.183Z,1516734107.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:47.530Z,1516734107.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:47.949Z,1516734107.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:48.379Z,1516734108.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:48.752Z,1516734108.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:49.151Z,1516734109.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:49.552Z,1516734109.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:49.956Z,1516734109.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:50.329Z,1516734110.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:50.758Z,1516734110.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:51.137Z,1516734111.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:51.565Z,1516734111.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:51.937Z,1516734111.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:52.330Z,1516734112.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:52.745Z,1516734112.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:53.189Z,1516734113.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:53.545Z,1516734113.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:53.945Z,1516734113.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:54.349Z,1516734114.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:54.746Z,1516734114.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:55.160Z,1516734115.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:55.558Z,1516734115.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:55.939Z,1516734115.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:56.374Z,1516734116.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:56.745Z,1516734116.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:57.147Z,1516734117.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:57.545Z,1516734117.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:57.937Z,1516734117.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:58.333Z,1516734118.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:58.738Z,1516734118.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:59.143Z,1516734119.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:59.145Z,1516734119.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:59.145Z,1516734119.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 314 2018-01-23T19:01:59.145Z,1516734119.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:01:59.157Z,1516734119.157 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:01:59.542Z,1516734119.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:59.554Z,1516734119.554 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:01:59.555Z,1516734119.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 314 2018-01-23T19:01:59.937Z,1516734119.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:01:59.938Z,1516734119.938 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:01:59.939Z,1516734119.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:01:59.939Z,1516734119.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:02:00.330Z,1516734120.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:00.744Z,1516734120.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:01.147Z,1516734121.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:01.550Z,1516734121.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:01.928Z,1516734121.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:02.324Z,1516734122.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:02.751Z,1516734122.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:03.130Z,1516734123.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:03.533Z,1516734123.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:03.926Z,1516734123.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:04.323Z,1516734124.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:04.733Z,1516734124.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:05.131Z,1516734125.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:05.529Z,1516734125.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:05.926Z,1516734125.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:06.328Z,1516734126.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:06.733Z,1516734126.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:07.140Z,1516734127.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:07.532Z,1516734127.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:07.918Z,1516734127.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:08.325Z,1516734128.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:08.730Z,1516734128.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:09.130Z,1516734129.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:09.530Z,1516734129.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:09.917Z,1516734129.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:10.321Z,1516734130.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:10.737Z,1516734130.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:11.136Z,1516734131.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:11.537Z,1516734131.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:11.924Z,1516734131.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:12.320Z,1516734132.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:12.737Z,1516734132.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:13.145Z,1516734133.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:13.539Z,1516734133.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:13.945Z,1516734133.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:14.329Z,1516734134.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:14.329Z,1516734134.329 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 314 2018-01-23T19:02:14.329Z,1516734134.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:02:14.347Z,1516734134.347 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:14.347Z,1516734134.347 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 314 2018-01-23T19:02:14.347Z,1516734134.347 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:02:14.364Z,1516734134.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:02:14.364Z,1516734134.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:02:14.777Z,1516734134.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:02:14.777Z,1516734134.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 314 2018-01-23T19:02:14.777Z,1516734134.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:02:14.777Z,1516734134.777 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 314 2018-01-23T19:02:15.133Z,1516734135.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:02:15.134Z,1516734135.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:02:15.134Z,1516734135.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:02:15.134Z,1516734135.134 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:02:15.135Z,1516734135.135 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:02:15.135Z,1516734135.135 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:02:15.538Z,1516734135.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:02:15.539Z,1516734135.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:15.925Z,1516734135.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:02:15.925Z,1516734135.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:16.325Z,1516734136.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:02:16.326Z,1516734136.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:16.737Z,1516734136.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:02:16.738Z,1516734136.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:17.137Z,1516734137.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:02:17.138Z,1516734137.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:17.534Z,1516734137.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:02:17.535Z,1516734137.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:17.924Z,1516734137.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:02:17.925Z,1516734137.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:18.328Z,1516734138.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:02:18.329Z,1516734138.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:18.740Z,1516734138.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:02:18.741Z,1516734138.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:19.139Z,1516734139.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:02:19.140Z,1516734139.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:19.538Z,1516734139.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:02:19.539Z,1516734139.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:19.946Z,1516734139.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:02:19.947Z,1516734139.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:20.338Z,1516734140.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:02:20.340Z,1516734140.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:20.729Z,1516734140.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:02:20.730Z,1516734140.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:21.137Z,1516734141.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:02:21.138Z,1516734141.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:21.538Z,1516734141.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:02:21.539Z,1516734141.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:21.935Z,1516734141.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:02:21.936Z,1516734141.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:22.348Z,1516734142.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:02:22.349Z,1516734142.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:25.439Z,1516734145.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T19:02:25.440Z,1516734145.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:25.627Z,1516734145.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T19:02:25.628Z,1516734145.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:25.911Z,1516734145.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:02:25.912Z,1516734145.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:26.312Z,1516734146.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:02:26.313Z,1516734146.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:26.701Z,1516734146.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:02:26.702Z,1516734146.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:27.124Z,1516734147.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:02:27.125Z,1516734147.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:27.526Z,1516734147.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:02:27.527Z,1516734147.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:27.922Z,1516734147.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:02:27.923Z,1516734147.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:28.308Z,1516734148.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:02:28.309Z,1516734148.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:28.695Z,1516734148.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:02:28.696Z,1516734148.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:29.096Z,1516734149.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:02:29.097Z,1516734149.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:29.528Z,1516734149.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:02:29.529Z,1516734149.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:29.869Z,1516734149.869 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:02:29.869Z,1516734149.869 [NAL9602] Data Fault, FailCount= 1 2018-01-23T19:02:29.869Z,1516734149.869 [NAL9602](ERROR): Data Fault 2018-01-23T19:02:29.904Z,1516734149.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:02:29.905Z,1516734149.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:29.950Z,1516734149.950 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:02:30.261Z,1516734150.261 [NAL9602](INFO): Powering down 2018-01-23T19:02:30.306Z,1516734150.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:02:30.307Z,1516734150.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:30.702Z,1516734150.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:02:30.704Z,1516734150.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:31.120Z,1516734151.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:02:31.121Z,1516734151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:31.141Z,1516734151.141 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:02:31.142Z,1516734151.142 [NAL9602] No Fault, FailCount= 1 2018-01-23T19:02:31.498Z,1516734151.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:02:31.499Z,1516734151.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:31.908Z,1516734151.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:02:31.908Z,1516734151.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:32.301Z,1516734152.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:02:32.302Z,1516734152.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:32.700Z,1516734152.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:02:32.701Z,1516734152.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:33.103Z,1516734153.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:02:33.104Z,1516734153.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:33.506Z,1516734153.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:02:33.507Z,1516734153.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:33.901Z,1516734153.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:02:33.902Z,1516734153.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:34.317Z,1516734154.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:02:34.318Z,1516734154.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:34.713Z,1516734154.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:35.105Z,1516734155.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:35.506Z,1516734155.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:35.905Z,1516734155.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:36.312Z,1516734156.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:36.708Z,1516734156.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:37.112Z,1516734157.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:37.509Z,1516734157.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:37.915Z,1516734157.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:38.303Z,1516734158.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:38.702Z,1516734158.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:39.117Z,1516734159.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:39.521Z,1516734159.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:39.910Z,1516734159.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:40.305Z,1516734160.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:40.715Z,1516734160.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:41.101Z,1516734161.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:41.513Z,1516734161.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:41.917Z,1516734161.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:42.293Z,1516734162.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:42.721Z,1516734162.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:43.101Z,1516734163.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:43.529Z,1516734163.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:43.902Z,1516734163.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:44.307Z,1516734164.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:44.695Z,1516734164.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:45.106Z,1516734165.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:45.503Z,1516734165.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:45.904Z,1516734165.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:46.301Z,1516734166.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:46.710Z,1516734166.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:47.099Z,1516734167.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:47.501Z,1516734167.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:47.901Z,1516734167.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:48.299Z,1516734168.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:48.701Z,1516734168.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:49.110Z,1516734169.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:49.502Z,1516734169.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:49.901Z,1516734169.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:50.313Z,1516734170.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:50.707Z,1516734170.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:51.108Z,1516734171.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:51.504Z,1516734171.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:51.900Z,1516734171.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:52.301Z,1516734172.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:52.704Z,1516734172.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:53.100Z,1516734173.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:53.502Z,1516734173.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:53.911Z,1516734173.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:54.300Z,1516734174.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:54.712Z,1516734174.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:55.104Z,1516734175.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:55.501Z,1516734175.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:55.913Z,1516734175.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:56.304Z,1516734176.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:56.708Z,1516734176.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:57.102Z,1516734177.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:57.504Z,1516734177.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:57.905Z,1516734177.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:58.304Z,1516734178.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:58.703Z,1516734178.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:59.101Z,1516734179.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:59.506Z,1516734179.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:02:59.907Z,1516734179.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:00.308Z,1516734180.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:00.668Z,1516734180.668 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:03:00.712Z,1516734180.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:01.113Z,1516734181.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:01.504Z,1516734181.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:01.904Z,1516734181.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:02.319Z,1516734182.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:02.707Z,1516734182.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:03.112Z,1516734183.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:03.511Z,1516734183.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:03.909Z,1516734183.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:04.305Z,1516734184.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:04.712Z,1516734184.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:05.100Z,1516734185.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:05.512Z,1516734185.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:05.911Z,1516734185.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:06.311Z,1516734186.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:06.694Z,1516734186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:07.120Z,1516734187.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:07.500Z,1516734187.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:07.906Z,1516734187.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:08.305Z,1516734188.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:08.700Z,1516734188.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:09.099Z,1516734189.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:09.505Z,1516734189.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:09.901Z,1516734189.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:10.301Z,1516734190.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:10.705Z,1516734190.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:11.110Z,1516734191.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:11.464Z,1516734191.464 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:03:11.509Z,1516734191.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:11.917Z,1516734191.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:12.325Z,1516734192.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:12.727Z,1516734192.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:13.118Z,1516734193.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:13.517Z,1516734193.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:13.901Z,1516734193.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:17.179Z,1516734197.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:17.332Z,1516734197.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:17.680Z,1516734197.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:18.085Z,1516734198.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:18.446Z,1516734198.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:18.844Z,1516734198.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:19.243Z,1516734199.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:19.647Z,1516734199.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:20.050Z,1516734200.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:20.447Z,1516734200.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:20.842Z,1516734200.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:21.249Z,1516734201.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:21.649Z,1516734201.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:22.043Z,1516734202.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:22.453Z,1516734202.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:22.854Z,1516734202.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:23.253Z,1516734203.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:23.646Z,1516734203.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:24.048Z,1516734204.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:24.454Z,1516734204.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:24.846Z,1516734204.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:25.254Z,1516734205.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:25.659Z,1516734205.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:26.058Z,1516734206.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:26.459Z,1516734206.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:26.849Z,1516734206.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:27.251Z,1516734207.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:27.657Z,1516734207.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:28.053Z,1516734208.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:28.454Z,1516734208.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:28.859Z,1516734208.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:29.258Z,1516734209.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:29.695Z,1516734209.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:30.066Z,1516734210.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:30.453Z,1516734210.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:30.856Z,1516734210.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:31.250Z,1516734211.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:31.664Z,1516734211.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:32.071Z,1516734212.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:32.475Z,1516734212.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:32.862Z,1516734212.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:33.267Z,1516734213.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:33.637Z,1516734213.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:34.041Z,1516734214.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:34.470Z,1516734214.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:34.866Z,1516734214.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:35.269Z,1516734215.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:35.649Z,1516734215.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:36.044Z,1516734216.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:36.444Z,1516734216.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:36.845Z,1516734216.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:37.253Z,1516734217.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:37.676Z,1516734217.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:38.050Z,1516734218.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:38.446Z,1516734218.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:38.842Z,1516734218.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:39.246Z,1516734219.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:39.648Z,1516734219.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:40.044Z,1516734220.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:40.458Z,1516734220.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:40.854Z,1516734220.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:41.250Z,1516734221.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:41.643Z,1516734221.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:42.048Z,1516734222.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:42.447Z,1516734222.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:42.845Z,1516734222.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:43.244Z,1516734223.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:43.661Z,1516734223.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:44.057Z,1516734224.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:44.455Z,1516734224.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:44.845Z,1516734224.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:45.245Z,1516734225.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:45.657Z,1516734225.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:46.053Z,1516734226.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:46.456Z,1516734226.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:46.858Z,1516734226.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:47.265Z,1516734227.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:47.649Z,1516734227.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:48.052Z,1516734228.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:48.450Z,1516734228.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:48.853Z,1516734228.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:49.249Z,1516734229.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:49.666Z,1516734229.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:50.059Z,1516734230.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:50.456Z,1516734230.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:50.851Z,1516734230.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:51.257Z,1516734231.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:51.658Z,1516734231.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:52.052Z,1516734232.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:52.456Z,1516734232.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:52.861Z,1516734232.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:53.258Z,1516734233.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:53.652Z,1516734233.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:54.052Z,1516734234.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:54.458Z,1516734234.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:54.858Z,1516734234.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:55.259Z,1516734235.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:55.646Z,1516734235.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:56.051Z,1516734236.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:56.453Z,1516734236.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:56.858Z,1516734236.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:57.254Z,1516734237.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:57.652Z,1516734237.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:58.053Z,1516734238.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:58.465Z,1516734238.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:58.858Z,1516734238.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:59.254Z,1516734239.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:03:59.651Z,1516734239.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:00.056Z,1516734240.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:00.458Z,1516734240.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:00.858Z,1516734240.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:01.262Z,1516734241.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:01.650Z,1516734241.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:02.049Z,1516734242.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:02.465Z,1516734242.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:02.858Z,1516734242.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:03.261Z,1516734243.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:03.652Z,1516734243.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:04.053Z,1516734244.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:04.456Z,1516734244.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:04.858Z,1516734244.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:05.257Z,1516734245.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:05.651Z,1516734245.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:06.057Z,1516734246.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:06.458Z,1516734246.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:06.858Z,1516734246.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:07.260Z,1516734247.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:07.650Z,1516734247.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:08.053Z,1516734248.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:08.459Z,1516734248.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:08.862Z,1516734248.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:09.263Z,1516734249.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:09.675Z,1516734249.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:10.055Z,1516734250.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:10.463Z,1516734250.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:10.861Z,1516734250.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:11.264Z,1516734251.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:11.654Z,1516734251.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:12.058Z,1516734252.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:12.459Z,1516734252.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:12.858Z,1516734252.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:13.269Z,1516734253.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:13.653Z,1516734253.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:14.059Z,1516734254.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:17.169Z,1516734257.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:17.309Z,1516734257.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:17.665Z,1516734257.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:18.062Z,1516734258.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:18.429Z,1516734258.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:18.836Z,1516734258.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:19.236Z,1516734259.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:19.639Z,1516734259.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:20.046Z,1516734260.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:20.438Z,1516734260.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:20.835Z,1516734260.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:21.237Z,1516734261.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:21.642Z,1516734261.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:22.036Z,1516734262.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:22.448Z,1516734262.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:22.850Z,1516734262.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:23.255Z,1516734263.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:23.679Z,1516734263.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:24.042Z,1516734264.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:24.449Z,1516734264.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:24.857Z,1516734264.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:25.251Z,1516734265.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:25.637Z,1516734265.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:26.042Z,1516734266.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:26.446Z,1516734266.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:26.846Z,1516734266.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:27.261Z,1516734267.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:27.651Z,1516734267.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:28.033Z,1516734268.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:28.443Z,1516734268.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:28.849Z,1516734268.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:29.269Z,1516734269.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:29.660Z,1516734269.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:30.051Z,1516734270.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:30.457Z,1516734270.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:30.845Z,1516734270.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:31.245Z,1516734271.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:31.633Z,1516734271.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:32.044Z,1516734272.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:32.427Z,1516734272.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:32.850Z,1516734272.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:33.265Z,1516734273.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:33.661Z,1516734273.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:34.041Z,1516734274.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:34.436Z,1516734274.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:34.844Z,1516734274.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:35.237Z,1516734275.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:35.665Z,1516734275.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:36.045Z,1516734276.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:36.438Z,1516734276.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:36.463Z,1516734276.463 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:04:36.840Z,1516734276.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:37.241Z,1516734277.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:37.643Z,1516734277.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:38.034Z,1516734278.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:38.449Z,1516734278.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:38.845Z,1516734278.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:39.249Z,1516734279.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:39.647Z,1516734279.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:40.037Z,1516734280.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:40.446Z,1516734280.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:40.836Z,1516734280.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:41.241Z,1516734281.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:41.650Z,1516734281.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:42.050Z,1516734282.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:42.447Z,1516734282.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:42.843Z,1516734282.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:43.247Z,1516734283.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:43.662Z,1516734283.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:44.037Z,1516734284.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:44.447Z,1516734284.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:44.850Z,1516734284.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:45.250Z,1516734285.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:45.650Z,1516734285.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:46.041Z,1516734286.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:46.441Z,1516734286.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:46.840Z,1516734286.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:47.261Z,1516734287.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:47.650Z,1516734287.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:48.059Z,1516734288.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:48.457Z,1516734288.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:48.849Z,1516734288.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:49.243Z,1516734289.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:49.638Z,1516734289.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:50.044Z,1516734290.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:50.444Z,1516734290.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:50.855Z,1516734290.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:51.250Z,1516734291.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:51.651Z,1516734291.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:52.039Z,1516734292.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:52.450Z,1516734292.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:52.846Z,1516734292.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:53.237Z,1516734293.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:53.652Z,1516734293.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:54.057Z,1516734294.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:54.458Z,1516734294.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:54.843Z,1516734294.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:55.244Z,1516734295.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:55.649Z,1516734295.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:56.032Z,1516734296.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:56.435Z,1516734296.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:56.865Z,1516734296.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:57.262Z,1516734297.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:57.664Z,1516734297.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:58.029Z,1516734298.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:58.465Z,1516734298.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:58.836Z,1516734298.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:59.231Z,1516734299.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:04:59.659Z,1516734299.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:00.064Z,1516734300.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:00.066Z,1516734300.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:00.067Z,1516734300.067 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 315 2018-01-23T19:05:00.067Z,1516734300.067 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:05:00.078Z,1516734300.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:05:00.463Z,1516734300.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:00.487Z,1516734300.487 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:05:00.487Z,1516734300.487 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 315 2018-01-23T19:05:00.838Z,1516734300.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:00.839Z,1516734300.839 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:05:00.839Z,1516734300.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:05:00.840Z,1516734300.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:05:01.240Z,1516734301.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:01.635Z,1516734301.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:02.037Z,1516734302.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:02.436Z,1516734302.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:02.838Z,1516734302.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:03.249Z,1516734303.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:03.647Z,1516734303.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:04.045Z,1516734304.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:04.438Z,1516734304.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:04.838Z,1516734304.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:05.234Z,1516734305.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:05.642Z,1516734305.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:06.041Z,1516734306.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:06.445Z,1516734306.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:06.839Z,1516734306.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:07.236Z,1516734307.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:07.634Z,1516734307.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:08.044Z,1516734308.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:08.439Z,1516734308.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:08.854Z,1516734308.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:09.243Z,1516734309.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:09.645Z,1516734309.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:10.040Z,1516734310.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:10.436Z,1516734310.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:10.850Z,1516734310.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:11.238Z,1516734311.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:11.654Z,1516734311.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:12.054Z,1516734312.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:12.449Z,1516734312.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:12.847Z,1516734312.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:12.850Z,1516734312.850 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:05:12.850Z,1516734312.850 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:05:12.850Z,1516734312.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:05:12.850Z,1516734312.850 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:05:13.252Z,1516734313.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:13.255Z,1516734313.255 [Default:CheckIn:D] Stopped 2018-01-23T19:05:13.255Z,1516734313.255 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:05:13.625Z,1516734313.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:13.636Z,1516734313.636 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 947.353255 min 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn:E] Stopped 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn] Stopped 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn](INFO): Running loop #93 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn] Running Loop=93 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:05:13.637Z,1516734313.637 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:05:14.054Z,1516734314.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:14.453Z,1516734314.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:17.558Z,1516734317.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:17.558Z,1516734317.558 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 315 2018-01-23T19:05:17.558Z,1516734317.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:05:17.560Z,1516734317.560 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:17.560Z,1516734317.560 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 315 2018-01-23T19:05:17.561Z,1516734317.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:05:17.573Z,1516734317.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:05:17.573Z,1516734317.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:05:17.718Z,1516734317.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:05:17.718Z,1516734317.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 315 2018-01-23T19:05:17.719Z,1516734317.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:05:17.719Z,1516734317.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 315 2018-01-23T19:05:18.036Z,1516734318.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:05:18.036Z,1516734318.036 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:05:18.037Z,1516734318.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:05:18.037Z,1516734318.037 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:05:18.037Z,1516734318.037 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:05:18.038Z,1516734318.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:05:18.431Z,1516734318.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T19:05:18.432Z,1516734318.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:18.829Z,1516734318.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T19:05:18.830Z,1516734318.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:19.226Z,1516734319.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T19:05:19.226Z,1516734319.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:19.638Z,1516734319.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T19:05:19.639Z,1516734319.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:20.044Z,1516734320.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T19:05:20.045Z,1516734320.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:20.437Z,1516734320.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T19:05:20.438Z,1516734320.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:20.835Z,1516734320.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T19:05:20.836Z,1516734320.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:21.228Z,1516734321.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T19:05:21.229Z,1516734321.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:21.625Z,1516734321.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T19:05:21.626Z,1516734321.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:22.029Z,1516734322.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T19:05:22.030Z,1516734322.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:22.433Z,1516734322.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T19:05:22.434Z,1516734322.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:22.841Z,1516734322.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T19:05:22.842Z,1516734322.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:23.242Z,1516734323.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T19:05:23.243Z,1516734323.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:23.645Z,1516734323.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T19:05:23.645Z,1516734323.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:24.037Z,1516734324.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T19:05:24.038Z,1516734324.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:24.436Z,1516734324.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T19:05:24.437Z,1516734324.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:24.831Z,1516734324.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T19:05:24.832Z,1516734324.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:25.235Z,1516734325.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T19:05:25.236Z,1516734325.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:25.643Z,1516734325.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T19:05:25.644Z,1516734325.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:26.042Z,1516734326.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T19:05:26.043Z,1516734326.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:26.438Z,1516734326.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T19:05:26.439Z,1516734326.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:26.832Z,1516734326.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T19:05:26.833Z,1516734326.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:27.230Z,1516734327.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T19:05:27.235Z,1516734327.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:27.639Z,1516734327.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T19:05:27.640Z,1516734327.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:28.037Z,1516734328.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T19:05:28.038Z,1516734328.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:28.437Z,1516734328.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T19:05:28.438Z,1516734328.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:28.840Z,1516734328.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T19:05:28.841Z,1516734328.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:29.251Z,1516734329.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T19:05:29.251Z,1516734329.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:29.650Z,1516734329.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T19:05:29.655Z,1516734329.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:30.040Z,1516734330.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T19:05:30.041Z,1516734330.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:30.424Z,1516734330.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T19:05:30.425Z,1516734330.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:30.823Z,1516734330.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T19:05:30.824Z,1516734330.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:31.252Z,1516734331.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T19:05:31.253Z,1516734331.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:31.669Z,1516734331.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T19:05:31.671Z,1516734331.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:32.034Z,1516734332.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T19:05:32.052Z,1516734332.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:32.434Z,1516734332.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T19:05:32.435Z,1516734332.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:32.828Z,1516734332.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T19:05:32.829Z,1516734332.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:33.232Z,1516734333.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T19:05:33.233Z,1516734333.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:33.628Z,1516734333.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T19:05:33.629Z,1516734333.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:34.027Z,1516734334.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T19:05:34.028Z,1516734334.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:34.425Z,1516734334.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T19:05:34.426Z,1516734334.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:34.830Z,1516734334.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T19:05:34.831Z,1516734334.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:35.233Z,1516734335.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T19:05:35.234Z,1516734335.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:35.630Z,1516734335.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T19:05:35.631Z,1516734335.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:36.043Z,1516734336.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T19:05:36.044Z,1516734336.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:36.449Z,1516734336.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T19:05:36.449Z,1516734336.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:36.840Z,1516734336.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T19:05:36.841Z,1516734336.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:37.224Z,1516734337.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T19:05:37.225Z,1516734337.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:37.651Z,1516734337.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:38.053Z,1516734338.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:38.453Z,1516734338.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:38.832Z,1516734338.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:39.222Z,1516734339.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:39.653Z,1516734339.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:40.026Z,1516734340.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:40.429Z,1516734340.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:40.859Z,1516734340.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:41.242Z,1516734341.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:41.631Z,1516734341.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:42.033Z,1516734342.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:42.432Z,1516734342.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:42.830Z,1516734342.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:43.233Z,1516734343.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:43.634Z,1516734343.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:44.038Z,1516734344.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:44.437Z,1516734344.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:44.831Z,1516734344.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:45.226Z,1516734345.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:45.627Z,1516734345.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:46.028Z,1516734346.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:46.426Z,1516734346.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:46.837Z,1516734346.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:47.238Z,1516734347.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:47.637Z,1516734347.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:48.027Z,1516734348.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:48.427Z,1516734348.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:48.829Z,1516734348.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:49.227Z,1516734349.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:49.641Z,1516734349.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:50.038Z,1516734350.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:50.434Z,1516734350.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:50.837Z,1516734350.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:51.226Z,1516734351.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:51.628Z,1516734351.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:52.032Z,1516734352.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:52.426Z,1516734352.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:52.837Z,1516734352.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:53.238Z,1516734353.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:53.637Z,1516734353.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:54.031Z,1516734354.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:54.439Z,1516734354.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:54.829Z,1516734354.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:55.227Z,1516734355.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:55.634Z,1516734355.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:56.034Z,1516734356.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:56.437Z,1516734356.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:56.832Z,1516734356.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:57.227Z,1516734357.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:57.637Z,1516734357.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:58.038Z,1516734358.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:58.434Z,1516734358.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:58.830Z,1516734358.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:59.228Z,1516734359.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:05:59.637Z,1516734359.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:00.041Z,1516734360.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:00.439Z,1516734360.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:00.829Z,1516734360.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:01.230Z,1516734361.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:01.638Z,1516734361.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:02.045Z,1516734362.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:02.449Z,1516734362.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:02.835Z,1516734362.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:03.233Z,1516734363.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:03.647Z,1516734363.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:04.049Z,1516734364.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:04.442Z,1516734364.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:04.836Z,1516734364.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:05.241Z,1516734365.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:05.648Z,1516734365.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:06.044Z,1516734366.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:06.447Z,1516734366.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:06.837Z,1516734366.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:07.245Z,1516734367.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:07.651Z,1516734367.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:08.061Z,1516734368.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:08.457Z,1516734368.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:08.828Z,1516734368.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:09.233Z,1516734369.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:09.657Z,1516734369.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:10.038Z,1516734370.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:10.461Z,1516734370.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:10.829Z,1516734370.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:11.227Z,1516734371.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:11.630Z,1516734371.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:12.062Z,1516734372.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:12.436Z,1516734372.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:12.837Z,1516734372.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:13.237Z,1516734373.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:13.646Z,1516734373.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:14.038Z,1516734374.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:14.434Z,1516734374.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:14.830Z,1516734374.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:17.923Z,1516734377.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:18.063Z,1516734378.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:18.421Z,1516734378.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:18.791Z,1516734378.791 [PNI_TCM](ERROR): CRC does not match. Expected:0x13815 got:0x27991 2018-01-23T19:06:18.819Z,1516734378.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:19.201Z,1516734379.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:19.596Z,1516734379.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:20.015Z,1516734380.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:20.391Z,1516734380.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:20.795Z,1516734380.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:21.196Z,1516734381.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:21.617Z,1516734381.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:21.991Z,1516734381.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:22.391Z,1516734382.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:22.797Z,1516734382.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:23.213Z,1516734383.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:23.591Z,1516734383.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:23.996Z,1516734383.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:24.401Z,1516734384.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:24.823Z,1516734384.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:25.187Z,1516734385.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:25.590Z,1516734385.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:25.995Z,1516734385.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:26.408Z,1516734386.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:26.801Z,1516734386.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:27.201Z,1516734387.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:27.601Z,1516734387.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:28.001Z,1516734388.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:28.403Z,1516734388.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:28.788Z,1516734388.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:29.197Z,1516734389.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:29.600Z,1516734389.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:30.001Z,1516734390.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:30.404Z,1516734390.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:30.800Z,1516734390.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:31.201Z,1516734391.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:31.591Z,1516734391.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:32.002Z,1516734392.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:32.393Z,1516734392.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:32.802Z,1516734392.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:33.211Z,1516734393.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:33.610Z,1516734393.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:33.993Z,1516734393.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:34.392Z,1516734394.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:34.795Z,1516734394.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:35.189Z,1516734395.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:35.601Z,1516734395.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:36.002Z,1516734396.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:36.402Z,1516734396.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:36.811Z,1516734396.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:37.201Z,1516734397.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:37.597Z,1516734397.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:38.005Z,1516734398.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:38.406Z,1516734398.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:38.808Z,1516734398.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:39.215Z,1516734399.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:39.624Z,1516734399.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:39.986Z,1516734399.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:40.398Z,1516734400.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:40.802Z,1516734400.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:41.205Z,1516734401.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:41.631Z,1516734401.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:42.010Z,1516734402.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:42.444Z,1516734402.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:42.824Z,1516734402.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:43.202Z,1516734403.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:43.620Z,1516734403.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:44.021Z,1516734404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:44.415Z,1516734404.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:44.826Z,1516734404.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:45.225Z,1516734405.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:45.605Z,1516734405.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:46.037Z,1516734406.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:46.445Z,1516734406.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:46.810Z,1516734406.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:47.223Z,1516734407.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:47.638Z,1516734407.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:48.009Z,1516734408.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:48.418Z,1516734408.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:48.855Z,1516734408.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:49.205Z,1516734409.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:49.630Z,1516734409.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:50.032Z,1516734410.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:50.419Z,1516734410.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:50.809Z,1516734410.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:51.244Z,1516734411.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:51.625Z,1516734411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:52.030Z,1516734412.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:52.428Z,1516734412.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:52.798Z,1516734412.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:53.208Z,1516734413.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:53.628Z,1516734413.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:54.001Z,1516734414.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:54.417Z,1516734414.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:54.840Z,1516734414.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:55.201Z,1516734415.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:55.620Z,1516734415.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:56.043Z,1516734416.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:56.406Z,1516734416.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:56.815Z,1516734416.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:57.238Z,1516734417.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:57.613Z,1516734417.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:58.035Z,1516734418.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:58.406Z,1516734418.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:58.789Z,1516734418.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:59.190Z,1516734419.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:06:59.593Z,1516734419.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:00.005Z,1516734420.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:00.405Z,1516734420.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:00.799Z,1516734420.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:01.193Z,1516734421.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:01.598Z,1516734421.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:01.992Z,1516734421.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:02.390Z,1516734422.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:02.797Z,1516734422.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:03.208Z,1516734423.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:03.609Z,1516734423.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:03.995Z,1516734423.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:04.399Z,1516734424.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:04.797Z,1516734424.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:05.200Z,1516734425.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:05.590Z,1516734425.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:06.005Z,1516734426.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:06.402Z,1516734426.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:06.809Z,1516734426.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:07.195Z,1516734427.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:07.595Z,1516734427.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:08.000Z,1516734428.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:08.401Z,1516734428.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:08.802Z,1516734428.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:09.202Z,1516734429.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:09.601Z,1516734429.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:09.999Z,1516734429.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:10.397Z,1516734430.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:10.795Z,1516734430.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:11.192Z,1516734431.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:11.605Z,1516734431.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:12.002Z,1516734432.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:12.456Z,1516734432.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:12.813Z,1516734432.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:13.189Z,1516734433.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:13.584Z,1516734433.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:13.984Z,1516734433.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:14.398Z,1516734434.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:14.805Z,1516734434.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:15.195Z,1516734435.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:18.676Z,1516734438.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:18.793Z,1516734438.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:19.145Z,1516734439.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:19.544Z,1516734439.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:19.944Z,1516734439.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:20.353Z,1516734440.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:20.778Z,1516734440.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:21.150Z,1516734441.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:21.546Z,1516734441.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:21.949Z,1516734441.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:22.343Z,1516734442.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:22.781Z,1516734442.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:23.151Z,1516734443.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:23.547Z,1516734443.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:23.944Z,1516734443.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:24.351Z,1516734444.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:24.747Z,1516734444.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:25.153Z,1516734445.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:25.575Z,1516734445.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:25.946Z,1516734445.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:26.348Z,1516734446.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:26.751Z,1516734446.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:27.150Z,1516734447.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:27.556Z,1516734447.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:27.953Z,1516734447.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:28.346Z,1516734448.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:28.749Z,1516734448.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:29.154Z,1516734449.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:29.553Z,1516734449.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:29.945Z,1516734449.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:30.344Z,1516734450.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:30.753Z,1516734450.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:31.156Z,1516734451.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:31.554Z,1516734451.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:31.944Z,1516734451.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:32.352Z,1516734452.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:32.754Z,1516734452.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:33.153Z,1516734453.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:33.560Z,1516734453.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:33.949Z,1516734453.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:34.343Z,1516734454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:34.757Z,1516734454.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:35.154Z,1516734455.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:35.553Z,1516734455.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:35.952Z,1516734455.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:36.353Z,1516734456.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:36.753Z,1516734456.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:37.160Z,1516734457.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:37.557Z,1516734457.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:37.944Z,1516734457.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:38.348Z,1516734458.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:38.753Z,1516734458.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:39.152Z,1516734459.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:39.556Z,1516734459.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:39.957Z,1516734459.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:40.347Z,1516734460.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:40.760Z,1516734460.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:41.154Z,1516734461.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:41.557Z,1516734461.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:41.951Z,1516734461.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:42.353Z,1516734462.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:42.753Z,1516734462.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:43.153Z,1516734463.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:43.554Z,1516734463.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:43.943Z,1516734463.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:44.344Z,1516734464.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:44.746Z,1516734464.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:45.152Z,1516734465.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:45.556Z,1516734465.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:45.955Z,1516734465.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:46.343Z,1516734466.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:46.752Z,1516734466.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:47.149Z,1516734467.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:47.543Z,1516734467.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:47.956Z,1516734467.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:48.354Z,1516734468.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:48.753Z,1516734468.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:49.152Z,1516734469.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:49.545Z,1516734469.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:49.942Z,1516734469.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:50.344Z,1516734470.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:50.746Z,1516734470.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:51.152Z,1516734471.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:51.556Z,1516734471.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:51.953Z,1516734471.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:52.345Z,1516734472.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:52.752Z,1516734472.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:53.149Z,1516734473.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:53.543Z,1516734473.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:53.954Z,1516734473.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:54.353Z,1516734474.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:54.753Z,1516734474.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:55.149Z,1516734475.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:55.545Z,1516734475.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:55.944Z,1516734475.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:56.346Z,1516734476.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:56.752Z,1516734476.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:57.161Z,1516734477.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:57.564Z,1516734477.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:57.958Z,1516734477.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:58.344Z,1516734478.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:58.755Z,1516734478.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:59.149Z,1516734479.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:59.543Z,1516734479.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:07:59.955Z,1516734479.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:00.353Z,1516734480.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:00.754Z,1516734480.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:01.152Z,1516734481.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:01.155Z,1516734481.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:01.155Z,1516734481.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 316 2018-01-23T19:08:01.155Z,1516734481.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:08:01.203Z,1516734481.203 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:08:01.554Z,1516734481.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:01.568Z,1516734481.568 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:08:01.568Z,1516734481.568 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 316 2018-01-23T19:08:01.944Z,1516734481.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:01.945Z,1516734481.945 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:08:01.946Z,1516734481.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:08:01.946Z,1516734481.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:08:02.354Z,1516734482.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:02.747Z,1516734482.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:03.154Z,1516734483.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:03.564Z,1516734483.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:03.965Z,1516734483.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:04.348Z,1516734484.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:04.752Z,1516734484.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:05.148Z,1516734485.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:05.545Z,1516734485.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:05.954Z,1516734485.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:06.366Z,1516734486.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:06.758Z,1516734486.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:07.161Z,1516734487.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:07.556Z,1516734487.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:07.949Z,1516734487.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:08.352Z,1516734488.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:08.742Z,1516734488.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:09.164Z,1516734489.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:09.564Z,1516734489.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:09.959Z,1516734489.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:10.356Z,1516734490.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:10.756Z,1516734490.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:11.158Z,1516734491.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:11.548Z,1516734491.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:11.960Z,1516734491.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:12.358Z,1516734492.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:12.769Z,1516734492.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:13.159Z,1516734493.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:13.533Z,1516734493.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:13.935Z,1516734493.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:14.339Z,1516734494.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:14.745Z,1516734494.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:15.174Z,1516734495.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:15.569Z,1516734495.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:18.671Z,1516734498.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:18.671Z,1516734498.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 316 2018-01-23T19:08:18.671Z,1516734498.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:08:18.673Z,1516734498.673 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:18.673Z,1516734498.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 316 2018-01-23T19:08:18.673Z,1516734498.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:08:18.686Z,1516734498.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:08:18.686Z,1516734498.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:08:18.841Z,1516734498.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:08:18.841Z,1516734498.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 316 2018-01-23T19:08:18.842Z,1516734498.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:08:18.842Z,1516734498.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 316 2018-01-23T19:08:19.140Z,1516734499.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:08:19.141Z,1516734499.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:08:19.141Z,1516734499.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:08:19.142Z,1516734499.142 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:08:19.142Z,1516734499.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:08:19.142Z,1516734499.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:08:19.555Z,1516734499.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T19:08:19.556Z,1516734499.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:19.960Z,1516734499.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T19:08:19.961Z,1516734499.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:20.357Z,1516734500.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T19:08:20.358Z,1516734500.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:20.750Z,1516734500.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T19:08:20.751Z,1516734500.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:21.144Z,1516734501.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T19:08:21.145Z,1516734501.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:21.547Z,1516734501.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T19:08:21.548Z,1516734501.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:21.948Z,1516734501.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T19:08:21.949Z,1516734501.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:22.345Z,1516734502.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T19:08:22.346Z,1516734502.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:22.744Z,1516734502.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T19:08:22.745Z,1516734502.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:23.157Z,1516734503.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T19:08:23.158Z,1516734503.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:23.557Z,1516734503.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T19:08:23.558Z,1516734503.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:23.949Z,1516734503.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T19:08:23.950Z,1516734503.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:24.348Z,1516734504.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T19:08:24.349Z,1516734504.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:24.736Z,1516734504.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T19:08:24.737Z,1516734504.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:25.133Z,1516734505.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T19:08:25.134Z,1516734505.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:25.539Z,1516734505.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T19:08:25.540Z,1516734505.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:25.952Z,1516734505.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T19:08:25.953Z,1516734505.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:26.349Z,1516734506.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T19:08:26.350Z,1516734506.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:26.749Z,1516734506.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T19:08:26.750Z,1516734506.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:27.144Z,1516734507.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T19:08:27.145Z,1516734507.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:27.538Z,1516734507.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T19:08:27.539Z,1516734507.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:27.940Z,1516734507.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T19:08:27.940Z,1516734507.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:28.341Z,1516734508.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T19:08:28.342Z,1516734508.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:28.739Z,1516734508.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T19:08:28.740Z,1516734508.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:29.149Z,1516734509.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T19:08:29.150Z,1516734509.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:29.550Z,1516734509.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T19:08:29.551Z,1516734509.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:29.952Z,1516734509.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T19:08:29.953Z,1516734509.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:30.345Z,1516734510.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T19:08:30.346Z,1516734510.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:30.743Z,1516734510.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T19:08:30.744Z,1516734510.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:31.141Z,1516734511.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T19:08:31.142Z,1516734511.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:31.543Z,1516734511.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T19:08:31.544Z,1516734511.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:31.949Z,1516734511.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T19:08:31.950Z,1516734511.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:32.353Z,1516734512.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T19:08:32.354Z,1516734512.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:32.750Z,1516734512.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T19:08:32.751Z,1516734512.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:33.139Z,1516734513.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T19:08:33.140Z,1516734513.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:33.541Z,1516734513.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T19:08:33.542Z,1516734513.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:33.940Z,1516734513.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T19:08:33.941Z,1516734513.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:34.340Z,1516734514.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T19:08:34.341Z,1516734514.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:34.739Z,1516734514.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T19:08:34.740Z,1516734514.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:35.156Z,1516734515.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T19:08:35.157Z,1516734515.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:35.550Z,1516734515.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T19:08:35.551Z,1516734515.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:35.949Z,1516734515.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T19:08:35.950Z,1516734515.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:36.341Z,1516734516.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T19:08:36.342Z,1516734516.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:36.742Z,1516734516.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T19:08:36.743Z,1516734516.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:37.142Z,1516734517.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T19:08:37.147Z,1516734517.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:37.541Z,1516734517.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T19:08:37.542Z,1516734517.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:37.960Z,1516734517.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T19:08:37.961Z,1516734517.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:38.353Z,1516734518.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T19:08:38.354Z,1516734518.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:38.751Z,1516734518.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:39.142Z,1516734519.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:39.550Z,1516734519.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:39.944Z,1516734519.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:40.341Z,1516734520.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:40.751Z,1516734520.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:41.152Z,1516734521.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:41.553Z,1516734521.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:41.957Z,1516734521.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:42.340Z,1516734522.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:42.749Z,1516734522.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:43.144Z,1516734523.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:43.551Z,1516734523.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:43.954Z,1516734523.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:44.370Z,1516734524.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:44.766Z,1516734524.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:45.132Z,1516734525.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:45.565Z,1516734525.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:45.941Z,1516734525.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:46.338Z,1516734526.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:46.740Z,1516734526.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:47.146Z,1516734527.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:47.549Z,1516734527.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:47.954Z,1516734527.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:48.340Z,1516734528.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:48.741Z,1516734528.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:49.142Z,1516734529.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:49.540Z,1516734529.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:49.950Z,1516734529.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:50.353Z,1516734530.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:50.750Z,1516734530.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:51.138Z,1516734531.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:51.545Z,1516734531.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:51.944Z,1516734531.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:52.344Z,1516734532.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:52.740Z,1516734532.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:53.156Z,1516734533.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:53.549Z,1516734533.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:53.949Z,1516734533.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:54.340Z,1516734534.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:54.738Z,1516734534.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:55.142Z,1516734535.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:55.543Z,1516734535.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:55.961Z,1516734535.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:56.357Z,1516734536.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:56.751Z,1516734536.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:57.146Z,1516734537.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:57.549Z,1516734537.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:57.941Z,1516734537.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:58.340Z,1516734538.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:58.750Z,1516734538.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:59.151Z,1516734539.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:59.553Z,1516734539.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:08:59.957Z,1516734539.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:00.343Z,1516734540.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:00.739Z,1516734540.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:01.142Z,1516734541.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:01.553Z,1516734541.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:01.949Z,1516734541.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:02.354Z,1516734542.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:02.751Z,1516734542.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:03.143Z,1516734543.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:03.540Z,1516734543.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:03.948Z,1516734543.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:04.344Z,1516734544.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:04.741Z,1516734544.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:05.150Z,1516734545.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:05.549Z,1516734545.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:05.949Z,1516734545.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:06.344Z,1516734546.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:06.739Z,1516734546.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:07.150Z,1516734547.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:07.540Z,1516734547.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:07.949Z,1516734547.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:08.353Z,1516734548.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:08.751Z,1516734548.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:09.145Z,1516734549.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:09.545Z,1516734549.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:09.943Z,1516734549.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:10.346Z,1516734550.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:10.754Z,1516734550.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:11.151Z,1516734551.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:11.554Z,1516734551.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:11.954Z,1516734551.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:12.345Z,1516734552.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:12.749Z,1516734552.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:13.151Z,1516734553.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:13.552Z,1516734553.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:13.956Z,1516734553.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:14.358Z,1516734554.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:14.750Z,1516734554.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:15.144Z,1516734555.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:15.548Z,1516734555.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:15.956Z,1516734555.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:19.059Z,1516734559.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:19.213Z,1516734559.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:19.541Z,1516734559.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:19.939Z,1516734559.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:20.340Z,1516734560.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:20.725Z,1516734560.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:21.154Z,1516734561.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:21.530Z,1516734561.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:21.930Z,1516734561.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:22.324Z,1516734562.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:22.725Z,1516734562.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:23.125Z,1516734563.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:23.528Z,1516734563.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:23.930Z,1516734563.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:24.349Z,1516734564.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:24.729Z,1516734564.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:25.126Z,1516734565.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:25.526Z,1516734565.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:25.938Z,1516734565.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:26.337Z,1516734566.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:26.734Z,1516734566.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:27.129Z,1516734567.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:27.529Z,1516734567.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:27.941Z,1516734567.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:28.339Z,1516734568.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:28.742Z,1516734568.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:29.137Z,1516734569.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:29.531Z,1516734569.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:29.934Z,1516734569.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:30.338Z,1516734570.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:30.747Z,1516734570.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:31.132Z,1516734571.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:31.544Z,1516734571.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:31.938Z,1516734571.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:32.338Z,1516734572.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:32.741Z,1516734572.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:33.133Z,1516734573.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:33.525Z,1516734573.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:33.938Z,1516734573.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:34.338Z,1516734574.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:34.738Z,1516734574.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:35.132Z,1516734575.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:35.535Z,1516734575.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:35.949Z,1516734575.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:36.345Z,1516734576.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:36.740Z,1516734576.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:37.119Z,1516734577.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:37.547Z,1516734577.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:37.952Z,1516734577.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:38.346Z,1516734578.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:38.749Z,1516734578.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:39.129Z,1516734579.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:39.524Z,1516734579.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:39.946Z,1516734579.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:40.352Z,1516734580.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:40.730Z,1516734580.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:41.129Z,1516734581.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:41.533Z,1516734581.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:41.951Z,1516734581.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:42.331Z,1516734582.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:42.754Z,1516734582.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:43.132Z,1516734583.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:43.527Z,1516734583.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:43.927Z,1516734583.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:44.333Z,1516734584.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:44.758Z,1516734584.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:45.129Z,1516734585.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:45.525Z,1516734585.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:45.926Z,1516734585.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:46.329Z,1516734586.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:46.727Z,1516734586.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:47.137Z,1516734587.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:47.534Z,1516734587.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:47.934Z,1516734587.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:48.331Z,1516734588.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:48.727Z,1516734588.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:49.128Z,1516734589.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:49.535Z,1516734589.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:49.933Z,1516734589.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:50.341Z,1516734590.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:50.744Z,1516734590.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:51.135Z,1516734591.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:51.530Z,1516734591.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:51.929Z,1516734591.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:52.329Z,1516734592.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:52.729Z,1516734592.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:53.156Z,1516734593.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:53.528Z,1516734593.528 [PNI_TCM](ERROR): CRC does not match. Expected:0x52209 got:0x183 2018-01-23T19:09:53.563Z,1516734593.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:53.941Z,1516734593.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:54.335Z,1516734594.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:54.737Z,1516734594.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:55.127Z,1516734595.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:55.533Z,1516734595.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:55.931Z,1516734595.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:56.341Z,1516734596.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:56.742Z,1516734596.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:57.139Z,1516734597.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:57.529Z,1516734597.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:57.936Z,1516734597.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:58.338Z,1516734598.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:58.728Z,1516734598.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:59.147Z,1516734599.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:59.553Z,1516734599.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:09:59.929Z,1516734599.929 [PNI_TCM](ERROR): CRC does not match. Expected:0x35208 got:0x49815 2018-01-23T19:09:59.957Z,1516734599.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:00.341Z,1516734600.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:00.712Z,1516734600.712 [PNI_TCM](ERROR): CRC does not match. Expected:0x48479 got:0x45130 2018-01-23T19:10:00.742Z,1516734600.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:01.141Z,1516734601.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:01.539Z,1516734601.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:01.940Z,1516734601.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:02.347Z,1516734602.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:02.753Z,1516734602.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:03.143Z,1516734603.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:03.541Z,1516734603.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:03.935Z,1516734603.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:04.316Z,1516734604.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:04.713Z,1516734604.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:05.151Z,1516734605.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:05.549Z,1516734605.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:05.953Z,1516734605.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:06.351Z,1516734606.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:06.751Z,1516734606.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:07.121Z,1516734607.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:07.528Z,1516734607.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:07.924Z,1516734607.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:08.330Z,1516734608.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:08.733Z,1516734608.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:09.157Z,1516734609.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:09.520Z,1516734609.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:09.935Z,1516734609.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:10.336Z,1516734610.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:10.720Z,1516734610.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:11.126Z,1516734611.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:11.555Z,1516734611.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:11.957Z,1516734611.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:12.360Z,1516734612.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:12.729Z,1516734612.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:13.129Z,1516734613.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:13.531Z,1516734613.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:13.929Z,1516734613.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:13.932Z,1516734613.932 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:05:13.6Z 2018-01-23T19:10:13.932Z,1516734613.932 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T19:10:13.932Z,1516734613.932 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T19:10:14.341Z,1516734614.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:14.871Z,1516734614.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:15.141Z,1516734615.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:15.541Z,1516734615.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:15.928Z,1516734615.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:16.328Z,1516734616.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:16.735Z,1516734616.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:17.134Z,1516734617.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:17.545Z,1516734617.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:17.938Z,1516734617.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:21.039Z,1516734621.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:21.119Z,1516734621.119 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0372.lzma 2018-01-23T19:10:21.188Z,1516734621.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:21.533Z,1516734621.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:21.870Z,1516734621.870 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0372.lzma.bak 2018-01-23T19:10:21.870Z,1516734621.870 [DataOverHttps](INFO): SBD MOMSN=7756483 2018-01-23T19:10:21.938Z,1516734621.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:22.574Z,1516734622.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:22.732Z,1516734622.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:25.800Z,1516734625.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:25.936Z,1516734625.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:26.327Z,1516734626.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:26.729Z,1516734626.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:27.128Z,1516734627.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:27.501Z,1516734627.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:30.594Z,1516734630.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:30.672Z,1516734630.672 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180123T031358/Express0373.lzma 2018-01-23T19:10:30.736Z,1516734630.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:31.089Z,1516734631.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:31.425Z,1516734631.425 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0373.lzma.bak 2018-01-23T19:10:31.426Z,1516734631.426 [DataOverHttps](INFO): SBD MOMSN=7756485 2018-01-23T19:10:31.504Z,1516734631.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:32.133Z,1516734632.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:32.136Z,1516734632.136 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:10:32.136Z,1516734632.136 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:10:32.136Z,1516734632.136 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:10:32.288Z,1516734632.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:35.381Z,1516734635.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:35.514Z,1516734635.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:35.852Z,1516734635.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:36.258Z,1516734636.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:36.661Z,1516734636.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:37.057Z,1516734637.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:37.452Z,1516734637.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:37.852Z,1516734637.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:38.257Z,1516734638.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:38.654Z,1516734638.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:39.054Z,1516734639.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:39.448Z,1516734639.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:39.848Z,1516734639.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:40.248Z,1516734640.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:40.653Z,1516734640.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:41.058Z,1516734641.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:41.459Z,1516734641.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:41.857Z,1516734641.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:42.249Z,1516734642.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:42.648Z,1516734642.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:43.065Z,1516734643.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:43.461Z,1516734643.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:43.865Z,1516734643.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:44.250Z,1516734644.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:44.652Z,1516734644.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:45.057Z,1516734645.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:45.461Z,1516734645.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:45.858Z,1516734645.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:46.250Z,1516734646.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:46.649Z,1516734646.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:47.058Z,1516734647.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:47.457Z,1516734647.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:47.857Z,1516734647.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:48.249Z,1516734648.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:48.653Z,1516734648.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:49.057Z,1516734649.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:49.461Z,1516734649.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:49.869Z,1516734649.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:50.252Z,1516734650.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:50.652Z,1516734650.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:51.061Z,1516734651.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:51.465Z,1516734651.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:51.866Z,1516734651.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:52.255Z,1516734652.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:52.656Z,1516734652.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:53.059Z,1516734653.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:53.478Z,1516734653.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:53.858Z,1516734653.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:54.244Z,1516734654.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:54.637Z,1516734654.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:55.054Z,1516734655.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:55.458Z,1516734655.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:55.854Z,1516734655.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:56.299Z,1516734656.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:56.669Z,1516734656.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:57.073Z,1516734657.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:57.471Z,1516734657.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:57.867Z,1516734657.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:58.265Z,1516734658.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:58.715Z,1516734658.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:59.070Z,1516734659.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:59.470Z,1516734659.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:10:59.876Z,1516734659.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:00.248Z,1516734660.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:00.649Z,1516734660.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:01.078Z,1516734661.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:01.458Z,1516734661.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:01.850Z,1516734661.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:02.257Z,1516734662.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:02.263Z,1516734662.263 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:02.263Z,1516734662.263 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 317 2018-01-23T19:11:02.263Z,1516734662.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:11:02.291Z,1516734662.291 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:11:02.650Z,1516734662.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:02.662Z,1516734662.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:11:02.662Z,1516734662.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 317 2018-01-23T19:11:03.049Z,1516734663.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:03.051Z,1516734663.051 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:11:03.051Z,1516734663.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:11:03.052Z,1516734663.052 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:11:03.459Z,1516734663.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:03.858Z,1516734663.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:04.264Z,1516734664.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:04.664Z,1516734664.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:05.053Z,1516734665.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:05.454Z,1516734665.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:05.850Z,1516734665.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:06.259Z,1516734666.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:06.667Z,1516734666.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:07.062Z,1516734667.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:07.453Z,1516734667.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:07.857Z,1516734667.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:08.256Z,1516734668.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:08.653Z,1516734668.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:09.057Z,1516734669.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:09.459Z,1516734669.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:09.862Z,1516734669.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:10.259Z,1516734670.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:10.694Z,1516734670.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:11.074Z,1516734671.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:11.446Z,1516734671.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:11.847Z,1516734671.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:12.277Z,1516734672.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:12.654Z,1516734672.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:13.078Z,1516734673.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:13.448Z,1516734673.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:13.853Z,1516734673.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:14.249Z,1516734674.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:14.648Z,1516734674.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:15.047Z,1516734675.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:15.451Z,1516734675.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:15.854Z,1516734675.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:16.251Z,1516734676.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:16.658Z,1516734676.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:17.047Z,1516734677.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:17.447Z,1516734677.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:17.853Z,1516734677.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:18.254Z,1516734678.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:18.657Z,1516734678.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:19.057Z,1516734679.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:19.451Z,1516734679.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:19.452Z,1516734679.452 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 317 2018-01-23T19:11:19.452Z,1516734679.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:11:19.453Z,1516734679.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:19.454Z,1516734679.454 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 317 2018-01-23T19:11:19.454Z,1516734679.454 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:11:19.466Z,1516734679.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:11:19.466Z,1516734679.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:11:19.877Z,1516734679.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:11:19.878Z,1516734679.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 317 2018-01-23T19:11:19.878Z,1516734679.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:11:19.878Z,1516734679.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 317 2018-01-23T19:11:20.249Z,1516734680.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:11:20.250Z,1516734680.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:11:20.250Z,1516734680.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:11:20.250Z,1516734680.250 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:11:20.251Z,1516734680.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:11:20.251Z,1516734680.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:11:20.660Z,1516734680.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:11:20.661Z,1516734680.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:21.060Z,1516734681.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:11:21.061Z,1516734681.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:21.468Z,1516734681.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:11:21.469Z,1516734681.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:21.868Z,1516734681.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:11:21.869Z,1516734681.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:22.259Z,1516734682.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:11:22.260Z,1516734682.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:22.655Z,1516734682.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:11:22.656Z,1516734682.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:23.064Z,1516734683.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:11:23.065Z,1516734683.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:23.451Z,1516734683.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:11:23.452Z,1516734683.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:23.855Z,1516734683.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:11:23.856Z,1516734683.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:24.262Z,1516734684.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:11:24.263Z,1516734684.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:24.659Z,1516734684.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:11:24.660Z,1516734684.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:25.068Z,1516734685.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:11:25.069Z,1516734685.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:25.452Z,1516734685.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:11:25.453Z,1516734685.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:25.852Z,1516734685.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:11:25.853Z,1516734685.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:26.252Z,1516734686.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:11:26.253Z,1516734686.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:26.651Z,1516734686.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:11:26.652Z,1516734686.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:27.056Z,1516734687.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:11:27.057Z,1516734687.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:27.458Z,1516734687.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:11:27.459Z,1516734687.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:27.866Z,1516734687.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:11:27.867Z,1516734687.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:28.258Z,1516734688.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:11:28.259Z,1516734688.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:28.655Z,1516734688.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:11:28.656Z,1516734688.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:29.051Z,1516734689.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:11:29.052Z,1516734689.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:29.455Z,1516734689.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:11:29.456Z,1516734689.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:29.855Z,1516734689.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:11:29.856Z,1516734689.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:30.270Z,1516734690.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:11:30.272Z,1516734690.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:30.661Z,1516734690.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:11:30.662Z,1516734690.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:31.059Z,1516734691.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:11:31.060Z,1516734691.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:31.462Z,1516734691.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:11:31.463Z,1516734691.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:31.852Z,1516734691.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:11:31.853Z,1516734691.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:32.252Z,1516734692.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:11:32.253Z,1516734692.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:32.653Z,1516734692.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:11:32.659Z,1516734692.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:35.750Z,1516734695.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T19:11:35.751Z,1516734695.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:35.904Z,1516734695.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T19:11:35.905Z,1516734695.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:36.225Z,1516734696.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:11:36.226Z,1516734696.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:36.626Z,1516734696.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:11:36.627Z,1516734696.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:37.025Z,1516734697.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:11:37.025Z,1516734697.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:37.428Z,1516734697.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:11:37.429Z,1516734697.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:37.824Z,1516734697.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:11:37.825Z,1516734697.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:38.227Z,1516734698.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:11:38.228Z,1516734698.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:38.629Z,1516734698.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:11:38.629Z,1516734698.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:39.028Z,1516734699.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:11:39.029Z,1516734699.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:39.413Z,1516734699.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:11:39.414Z,1516734699.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:39.818Z,1516734699.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:40.220Z,1516734700.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:40.616Z,1516734700.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:41.029Z,1516734701.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:41.429Z,1516734701.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:41.837Z,1516734701.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:42.230Z,1516734702.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:42.629Z,1516734702.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:43.018Z,1516734703.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:43.425Z,1516734703.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:43.830Z,1516734703.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:44.236Z,1516734704.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:44.633Z,1516734704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:45.029Z,1516734705.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:45.413Z,1516734705.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:45.828Z,1516734705.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:46.230Z,1516734706.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:46.606Z,1516734706.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:47.031Z,1516734707.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:47.438Z,1516734707.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:47.837Z,1516734707.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:48.241Z,1516734708.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:48.638Z,1516734708.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:49.032Z,1516734709.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:49.433Z,1516734709.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:49.813Z,1516734709.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:50.239Z,1516734710.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:50.639Z,1516734710.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:51.019Z,1516734711.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:51.429Z,1516734711.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:51.817Z,1516734711.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:52.216Z,1516734712.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:52.617Z,1516734712.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:53.016Z,1516734713.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:53.422Z,1516734713.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:53.822Z,1516734713.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:54.225Z,1516734714.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:54.620Z,1516734714.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:55.016Z,1516734715.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:55.424Z,1516734715.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:55.816Z,1516734715.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:56.226Z,1516734716.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:56.629Z,1516734716.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:57.029Z,1516734717.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:57.415Z,1516734717.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:57.818Z,1516734717.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:58.225Z,1516734718.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:58.621Z,1516734718.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:59.016Z,1516734719.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:59.441Z,1516734719.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:11:59.837Z,1516734719.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:00.226Z,1516734720.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:00.626Z,1516734720.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:01.023Z,1516734721.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:01.424Z,1516734721.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:01.828Z,1516734721.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:02.226Z,1516734722.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:02.630Z,1516734722.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:03.027Z,1516734723.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:03.423Z,1516734723.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:03.823Z,1516734723.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:04.229Z,1516734724.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:04.621Z,1516734724.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:05.025Z,1516734725.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:05.432Z,1516734725.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:05.833Z,1516734725.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:06.235Z,1516734726.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:06.641Z,1516734726.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:07.027Z,1516734727.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:07.420Z,1516734727.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:07.834Z,1516734727.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:08.228Z,1516734728.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:08.639Z,1516734728.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:09.031Z,1516734729.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:09.433Z,1516734729.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:09.833Z,1516734729.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:10.239Z,1516734730.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:10.633Z,1516734730.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:11.037Z,1516734731.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:11.436Z,1516734731.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:11.813Z,1516734731.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:12.213Z,1516734732.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:12.621Z,1516734732.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:13.014Z,1516734733.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:13.422Z,1516734733.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:13.848Z,1516734733.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:14.226Z,1516734734.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:14.624Z,1516734734.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:15.018Z,1516734735.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:15.423Z,1516734735.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:15.820Z,1516734735.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:16.223Z,1516734736.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:16.623Z,1516734736.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:17.021Z,1516734737.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:17.418Z,1516734737.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:17.816Z,1516734737.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:18.248Z,1516734738.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:18.626Z,1516734738.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:19.025Z,1516734739.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:19.419Z,1516734739.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:19.817Z,1516734739.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:20.226Z,1516734740.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:20.630Z,1516734740.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:21.037Z,1516734741.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:21.418Z,1516734741.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:21.818Z,1516734741.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:22.228Z,1516734742.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:22.637Z,1516734742.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:23.026Z,1516734743.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:23.424Z,1516734743.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:23.825Z,1516734743.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:24.226Z,1516734744.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:24.637Z,1516734744.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:25.037Z,1516734745.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:25.426Z,1516734745.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:25.824Z,1516734745.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:26.230Z,1516734746.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:26.630Z,1516734746.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:27.027Z,1516734747.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:27.419Z,1516734747.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:27.818Z,1516734747.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:28.227Z,1516734748.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:28.629Z,1516734748.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:29.026Z,1516734749.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:29.424Z,1516734749.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:29.818Z,1516734749.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:30.231Z,1516734750.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:30.630Z,1516734750.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:31.030Z,1516734751.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:31.418Z,1516734751.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:31.820Z,1516734751.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:32.226Z,1516734752.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:32.632Z,1516734752.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:33.033Z,1516734753.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:36.112Z,1516734756.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:36.237Z,1516734756.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:36.593Z,1516734756.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:37.001Z,1516734757.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:37.397Z,1516734757.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:37.783Z,1516734757.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:38.197Z,1516734758.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:38.587Z,1516734758.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:38.990Z,1516734758.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:39.390Z,1516734759.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:39.816Z,1516734759.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:40.182Z,1516734760.182 [PNI_TCM](ERROR): CRC does not match. Expected:0x2448 got:0x16903 2018-01-23T19:12:40.224Z,1516734760.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:40.586Z,1516734760.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:40.981Z,1516734760.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:41.386Z,1516734761.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:41.786Z,1516734761.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:42.186Z,1516734762.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:42.596Z,1516734762.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:43.026Z,1516734763.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:43.405Z,1516734763.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:43.794Z,1516734763.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:44.192Z,1516734764.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:44.596Z,1516734764.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:44.968Z,1516734764.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:45.402Z,1516734765.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:45.805Z,1516734765.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:46.201Z,1516734766.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:46.573Z,1516734766.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:46.978Z,1516734766.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:47.399Z,1516734767.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:47.805Z,1516734767.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:48.187Z,1516734768.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:48.605Z,1516734768.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:48.985Z,1516734768.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:49.406Z,1516734769.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:49.788Z,1516734769.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:50.181Z,1516734770.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:50.588Z,1516734770.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:50.978Z,1516734770.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:51.390Z,1516734771.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:51.790Z,1516734771.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:52.189Z,1516734772.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:52.593Z,1516734772.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:52.976Z,1516734772.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:53.390Z,1516734773.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:53.793Z,1516734773.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:54.181Z,1516734774.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:54.600Z,1516734774.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:54.994Z,1516734774.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:55.397Z,1516734775.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:55.797Z,1516734775.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:56.182Z,1516734776.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:56.581Z,1516734776.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:56.981Z,1516734776.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:57.389Z,1516734777.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:57.790Z,1516734777.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:58.190Z,1516734778.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:58.586Z,1516734778.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:58.985Z,1516734778.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:59.385Z,1516734779.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:12:59.781Z,1516734779.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:00.189Z,1516734780.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:00.590Z,1516734780.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:00.991Z,1516734780.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:01.390Z,1516734781.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:01.781Z,1516734781.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:02.189Z,1516734782.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:02.582Z,1516734782.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:02.984Z,1516734782.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:03.396Z,1516734783.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:03.793Z,1516734783.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:04.187Z,1516734784.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:04.581Z,1516734784.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:04.984Z,1516734784.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:05.380Z,1516734785.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:05.785Z,1516734785.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:06.181Z,1516734786.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:06.597Z,1516734786.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:06.995Z,1516734786.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:07.390Z,1516734787.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:07.778Z,1516734787.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:08.188Z,1516734788.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:08.583Z,1516734788.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:08.977Z,1516734788.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:09.397Z,1516734789.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:09.795Z,1516734789.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:10.190Z,1516734790.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:10.592Z,1516734790.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:10.978Z,1516734790.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:11.385Z,1516734791.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:11.785Z,1516734791.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:12.178Z,1516734792.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:12.536Z,1516734792.536 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:13:12.536Z,1516734792.536 [NAL9602] Data Fault, FailCount= 2 2018-01-23T19:13:12.536Z,1516734792.536 [NAL9602](ERROR): Data Fault 2018-01-23T19:13:12.589Z,1516734792.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:12.620Z,1516734792.620 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:13:12.936Z,1516734792.936 [NAL9602](INFO): Powering down 2018-01-23T19:13:12.985Z,1516734792.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:13.387Z,1516734793.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:13.787Z,1516734793.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:13.800Z,1516734793.800 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:13:13.800Z,1516734793.800 [NAL9602] No Fault, FailCount= 2 2018-01-23T19:13:14.179Z,1516734794.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:14.591Z,1516734794.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:14.989Z,1516734794.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:15.365Z,1516734795.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:15.773Z,1516734795.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:16.197Z,1516734796.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:16.568Z,1516734796.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:16.977Z,1516734796.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:17.376Z,1516734797.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:17.774Z,1516734797.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:18.177Z,1516734798.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:18.578Z,1516734798.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:18.976Z,1516734798.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:19.376Z,1516734799.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:19.776Z,1516734799.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:20.176Z,1516734800.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:20.585Z,1516734800.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:20.976Z,1516734800.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:21.375Z,1516734801.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:21.776Z,1516734801.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:22.176Z,1516734802.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:22.577Z,1516734802.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:22.976Z,1516734802.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:23.376Z,1516734803.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:23.777Z,1516734803.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:24.181Z,1516734804.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:24.581Z,1516734804.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:24.977Z,1516734804.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:25.379Z,1516734805.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:25.781Z,1516734805.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:26.178Z,1516734806.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:26.576Z,1516734806.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:26.977Z,1516734806.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:27.378Z,1516734807.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:27.777Z,1516734807.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:28.177Z,1516734808.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:28.577Z,1516734808.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:28.977Z,1516734808.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:29.377Z,1516734809.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:29.777Z,1516734809.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:30.174Z,1516734810.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:30.581Z,1516734810.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:30.976Z,1516734810.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:31.373Z,1516734811.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:31.781Z,1516734811.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:32.179Z,1516734812.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:32.576Z,1516734812.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:32.984Z,1516734812.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:33.382Z,1516734813.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:36.472Z,1516734816.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:36.616Z,1516734816.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:36.940Z,1516734816.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:37.335Z,1516734817.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:37.736Z,1516734817.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:38.143Z,1516734818.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:38.534Z,1516734818.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:38.937Z,1516734818.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:39.345Z,1516734819.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:39.735Z,1516734819.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:40.137Z,1516734820.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:40.544Z,1516734820.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:40.937Z,1516734820.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:41.337Z,1516734821.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:41.737Z,1516734821.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:42.137Z,1516734822.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:42.543Z,1516734822.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:42.937Z,1516734822.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:43.297Z,1516734823.297 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:13:43.361Z,1516734823.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:43.738Z,1516734823.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:44.138Z,1516734824.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:44.536Z,1516734824.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:44.939Z,1516734824.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:45.345Z,1516734825.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:45.741Z,1516734825.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:46.142Z,1516734826.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:46.542Z,1516734826.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:46.938Z,1516734826.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:47.338Z,1516734827.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:47.745Z,1516734827.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:48.136Z,1516734828.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:48.538Z,1516734828.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:48.940Z,1516734828.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:49.338Z,1516734829.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:49.738Z,1516734829.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:50.139Z,1516734830.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:50.538Z,1516734830.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:50.938Z,1516734830.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:51.338Z,1516734831.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:51.738Z,1516734831.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:52.145Z,1516734832.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:52.540Z,1516734832.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:52.936Z,1516734832.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:53.340Z,1516734833.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:53.749Z,1516734833.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:54.100Z,1516734834.100 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:13:54.144Z,1516734834.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:54.545Z,1516734834.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:54.953Z,1516734834.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:55.349Z,1516734835.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:55.749Z,1516734835.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:56.144Z,1516734836.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:56.543Z,1516734836.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:56.939Z,1516734836.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:57.354Z,1516734837.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:57.751Z,1516734837.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:58.149Z,1516734838.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:58.544Z,1516734838.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:58.941Z,1516734838.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:59.342Z,1516734839.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:13:59.745Z,1516734839.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:00.146Z,1516734840.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:00.546Z,1516734840.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:00.945Z,1516734840.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:01.345Z,1516734841.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:01.741Z,1516734841.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:02.141Z,1516734842.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:02.545Z,1516734842.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:02.940Z,1516734842.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:03.351Z,1516734843.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:03.354Z,1516734843.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:03.354Z,1516734843.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 318 2018-01-23T19:14:03.354Z,1516734843.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:14:03.374Z,1516734843.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:14:03.760Z,1516734843.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:03.785Z,1516734843.785 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:14:03.785Z,1516734843.785 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 318 2018-01-23T19:14:04.154Z,1516734844.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:04.156Z,1516734844.156 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:14:04.156Z,1516734844.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:14:04.156Z,1516734844.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:14:04.543Z,1516734844.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:04.956Z,1516734844.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:05.342Z,1516734845.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:05.749Z,1516734845.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:06.156Z,1516734846.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:06.555Z,1516734846.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:06.951Z,1516734846.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:07.350Z,1516734847.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:07.748Z,1516734847.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:08.153Z,1516734848.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:08.549Z,1516734848.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:08.948Z,1516734848.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:09.365Z,1516734849.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:09.765Z,1516734849.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:10.159Z,1516734850.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:10.546Z,1516734850.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:10.944Z,1516734850.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:11.352Z,1516734851.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:11.753Z,1516734851.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:12.156Z,1516734852.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:12.556Z,1516734852.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:12.963Z,1516734852.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:13.354Z,1516734853.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:13.732Z,1516734853.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:14.132Z,1516734854.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:14.565Z,1516734854.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:14.940Z,1516734854.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:15.346Z,1516734855.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:15.748Z,1516734855.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:16.145Z,1516734856.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:16.545Z,1516734856.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:16.944Z,1516734856.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:17.340Z,1516734857.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:17.740Z,1516734857.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:18.150Z,1516734858.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:18.551Z,1516734858.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:18.945Z,1516734858.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:19.345Z,1516734859.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:19.739Z,1516734859.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:20.149Z,1516734860.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:20.543Z,1516734860.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:20.544Z,1516734860.544 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 318 2018-01-23T19:14:20.544Z,1516734860.544 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:14:20.545Z,1516734860.545 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:20.546Z,1516734860.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 318 2018-01-23T19:14:20.546Z,1516734860.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:14:20.576Z,1516734860.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:14:20.576Z,1516734860.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:14:20.950Z,1516734860.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:14:20.950Z,1516734860.950 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 318 2018-01-23T19:14:20.951Z,1516734860.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:14:20.951Z,1516734860.951 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 318 2018-01-23T19:14:21.363Z,1516734861.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:14:21.364Z,1516734861.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:14:21.364Z,1516734861.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:14:21.365Z,1516734861.365 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:14:21.365Z,1516734861.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:14:21.365Z,1516734861.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:14:21.746Z,1516734861.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:14:21.747Z,1516734861.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:22.145Z,1516734862.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:14:22.146Z,1516734862.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:22.543Z,1516734862.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:14:22.544Z,1516734862.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:22.936Z,1516734862.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:14:22.937Z,1516734862.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:23.339Z,1516734863.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:14:23.340Z,1516734863.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:23.744Z,1516734863.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:14:23.745Z,1516734863.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:24.170Z,1516734864.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:14:24.171Z,1516734864.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:24.550Z,1516734864.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:14:24.559Z,1516734864.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:24.942Z,1516734864.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:14:24.943Z,1516734864.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:25.338Z,1516734865.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:14:25.339Z,1516734865.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:25.737Z,1516734865.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:14:25.739Z,1516734865.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:26.145Z,1516734866.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:14:26.146Z,1516734866.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:26.543Z,1516734866.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:14:26.544Z,1516734866.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:26.938Z,1516734866.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:14:26.939Z,1516734866.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:27.346Z,1516734867.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:14:27.347Z,1516734867.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:27.746Z,1516734867.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:14:27.748Z,1516734867.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:28.144Z,1516734868.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:14:28.145Z,1516734868.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:28.539Z,1516734868.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:14:28.540Z,1516734868.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:28.939Z,1516734868.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:14:28.940Z,1516734868.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:29.339Z,1516734869.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:14:29.340Z,1516734869.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:29.739Z,1516734869.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:14:29.740Z,1516734869.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:30.149Z,1516734870.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:14:30.150Z,1516734870.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:30.545Z,1516734870.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:14:30.546Z,1516734870.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:30.945Z,1516734870.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:14:30.946Z,1516734870.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:31.339Z,1516734871.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:14:31.340Z,1516734871.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:31.738Z,1516734871.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:14:31.739Z,1516734871.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:32.149Z,1516734872.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:14:32.150Z,1516734872.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:32.543Z,1516734872.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:14:32.544Z,1516734872.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:32.944Z,1516734872.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:14:32.945Z,1516734872.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:33.345Z,1516734873.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:14:33.346Z,1516734873.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:33.746Z,1516734873.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:14:33.748Z,1516734873.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:36.843Z,1516734876.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T19:14:36.844Z,1516734876.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:36.858Z,1516734876.858 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:14:36.988Z,1516734876.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:14:36.989Z,1516734876.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:37.329Z,1516734877.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:14:37.330Z,1516734877.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:37.735Z,1516734877.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:14:37.736Z,1516734877.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:38.138Z,1516734878.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:14:38.139Z,1516734878.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:38.546Z,1516734878.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:14:38.551Z,1516734878.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:38.943Z,1516734878.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:14:38.944Z,1516734878.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:39.335Z,1516734879.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:14:39.336Z,1516734879.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:39.737Z,1516734879.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:14:39.738Z,1516734879.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:40.146Z,1516734880.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:14:40.153Z,1516734880.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:40.526Z,1516734880.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:14:40.531Z,1516734880.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:40.939Z,1516734880.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:41.351Z,1516734881.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:41.752Z,1516734881.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:42.153Z,1516734882.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:42.551Z,1516734882.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:42.948Z,1516734882.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:43.348Z,1516734883.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:43.756Z,1516734883.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:44.153Z,1516734884.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:44.554Z,1516734884.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:44.954Z,1516734884.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:45.321Z,1516734885.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:45.749Z,1516734885.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:46.127Z,1516734886.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:46.537Z,1516734886.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:46.929Z,1516734886.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:47.330Z,1516734887.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:47.742Z,1516734887.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:48.134Z,1516734888.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:48.529Z,1516734888.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:48.930Z,1516734888.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:49.330Z,1516734889.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:49.729Z,1516734889.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:50.134Z,1516734890.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:50.541Z,1516734890.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:50.935Z,1516734890.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:51.328Z,1516734891.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:51.731Z,1516734891.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:52.130Z,1516734892.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:52.531Z,1516734892.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:52.928Z,1516734892.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:53.335Z,1516734893.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:53.736Z,1516734893.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:54.137Z,1516734894.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:54.532Z,1516734894.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:54.932Z,1516734894.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:55.329Z,1516734895.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:55.728Z,1516734895.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:56.137Z,1516734896.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:56.534Z,1516734896.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:56.940Z,1516734896.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:57.325Z,1516734897.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:57.735Z,1516734897.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:58.128Z,1516734898.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:58.537Z,1516734898.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:58.927Z,1516734898.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:59.340Z,1516734899.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:14:59.738Z,1516734899.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:00.137Z,1516734900.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:00.528Z,1516734900.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:00.932Z,1516734900.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:01.329Z,1516734901.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:01.728Z,1516734901.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:02.137Z,1516734902.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:02.538Z,1516734902.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:02.933Z,1516734902.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:03.326Z,1516734903.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:03.726Z,1516734903.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:04.128Z,1516734904.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:04.529Z,1516734904.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:04.927Z,1516734904.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:05.334Z,1516734905.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:05.737Z,1516734905.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:06.134Z,1516734906.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:06.528Z,1516734906.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:06.927Z,1516734906.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:07.336Z,1516734907.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:07.732Z,1516734907.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:08.141Z,1516734908.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:08.538Z,1516734908.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:08.937Z,1516734908.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:09.326Z,1516734909.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:09.730Z,1516734909.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:10.128Z,1516734910.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:10.529Z,1516734910.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:10.941Z,1516734910.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:11.339Z,1516734911.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:11.742Z,1516734911.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:12.137Z,1516734912.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:12.536Z,1516734912.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:12.927Z,1516734912.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:13.329Z,1516734913.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:13.729Z,1516734913.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:14.137Z,1516734914.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:14.545Z,1516734914.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:14.941Z,1516734914.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:15.332Z,1516734915.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:15.729Z,1516734915.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:16.138Z,1516734916.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:16.541Z,1516734916.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:16.938Z,1516734916.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:17.332Z,1516734917.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:17.730Z,1516734917.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:18.150Z,1516734918.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:18.549Z,1516734918.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:18.941Z,1516734918.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:19.330Z,1516734919.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:19.733Z,1516734919.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:20.140Z,1516734920.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:20.546Z,1516734920.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:20.944Z,1516734920.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:21.336Z,1516734921.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:21.740Z,1516734921.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:22.151Z,1516734922.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:22.549Z,1516734922.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:22.949Z,1516734922.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:23.342Z,1516734923.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:23.777Z,1516734923.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:24.142Z,1516734924.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:24.549Z,1516734924.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:24.942Z,1516734924.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:25.332Z,1516734925.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:25.749Z,1516734925.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:26.140Z,1516734926.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:26.552Z,1516734926.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:26.950Z,1516734926.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:27.320Z,1516734927.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:27.748Z,1516734927.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:28.149Z,1516734928.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:28.546Z,1516734928.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:28.949Z,1516734928.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:29.326Z,1516734929.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:29.733Z,1516734929.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:30.157Z,1516734930.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:30.559Z,1516734930.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:30.931Z,1516734930.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:31.330Z,1516734931.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:31.733Z,1516734931.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:32.161Z,1516734932.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:32.534Z,1516734932.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:32.538Z,1516734932.538 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:15:32.538Z,1516734932.538 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:15:32.538Z,1516734932.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:15:32.538Z,1516734932.538 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:15:32.933Z,1516734932.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:32.936Z,1516734932.936 [Default:CheckIn:D] Stopped 2018-01-23T19:15:32.937Z,1516734932.937 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:15:33.332Z,1516734933.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:33.340Z,1516734933.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 957.681250 min 2018-01-23T19:15:33.340Z,1516734933.340 [Default:CheckIn:E] Stopped 2018-01-23T19:15:33.340Z,1516734933.340 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:15:33.340Z,1516734933.340 [Default:CheckIn] Stopped 2018-01-23T19:15:33.340Z,1516734933.340 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:15:33.341Z,1516734933.341 [Default:CheckIn](INFO): Running loop #94 2018-01-23T19:15:33.341Z,1516734933.341 [Default:CheckIn] Running Loop=94 2018-01-23T19:15:33.341Z,1516734933.341 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:15:33.341Z,1516734933.341 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:15:33.730Z,1516734933.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:34.149Z,1516734934.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:37.236Z,1516734937.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:37.376Z,1516734937.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:37.709Z,1516734937.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:38.107Z,1516734938.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:38.501Z,1516734938.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:38.898Z,1516734938.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:39.312Z,1516734939.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:39.714Z,1516734939.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:40.106Z,1516734940.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:40.500Z,1516734940.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:40.902Z,1516734940.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:41.308Z,1516734941.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:41.703Z,1516734941.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:42.109Z,1516734942.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:42.506Z,1516734942.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:42.918Z,1516734942.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:43.309Z,1516734943.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:43.709Z,1516734943.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:44.106Z,1516734944.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:44.505Z,1516734944.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:44.909Z,1516734944.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:45.312Z,1516734945.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:45.713Z,1516734945.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:46.113Z,1516734946.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:46.504Z,1516734946.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:46.898Z,1516734946.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:47.307Z,1516734947.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:47.702Z,1516734947.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:48.107Z,1516734948.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:48.509Z,1516734948.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:48.910Z,1516734948.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:49.306Z,1516734949.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:49.709Z,1516734949.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:50.113Z,1516734950.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:50.508Z,1516734950.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:50.908Z,1516734950.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:51.318Z,1516734951.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:51.706Z,1516734951.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:52.113Z,1516734952.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:52.504Z,1516734952.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:52.909Z,1516734952.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:53.304Z,1516734953.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:53.704Z,1516734953.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:54.106Z,1516734954.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:54.510Z,1516734954.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:54.913Z,1516734954.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:55.318Z,1516734955.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:55.706Z,1516734955.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:56.103Z,1516734956.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:56.509Z,1516734956.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:56.911Z,1516734956.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:57.314Z,1516734957.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:57.714Z,1516734957.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:58.114Z,1516734958.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:58.513Z,1516734958.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:58.897Z,1516734958.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x24757 got:0x28017 2018-01-23T19:15:58.939Z,1516734958.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:59.301Z,1516734959.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:15:59.703Z,1516734959.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:00.105Z,1516734960.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:00.513Z,1516734960.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:00.914Z,1516734960.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:01.309Z,1516734961.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:01.706Z,1516734961.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:02.113Z,1516734962.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:02.506Z,1516734962.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:02.907Z,1516734962.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:03.320Z,1516734963.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:03.718Z,1516734963.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:04.117Z,1516734964.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:04.507Z,1516734964.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:04.921Z,1516734964.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:05.301Z,1516734965.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T19:16:05.344Z,1516734965.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:05.714Z,1516734965.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:06.105Z,1516734966.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:06.525Z,1516734966.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:06.924Z,1516734966.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:07.324Z,1516734967.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:07.706Z,1516734967.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:08.109Z,1516734968.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:08.511Z,1516734968.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:08.905Z,1516734968.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:09.318Z,1516734969.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:09.744Z,1516734969.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:10.109Z,1516734970.109 [PNI_TCM](ERROR): CRC does not match. Expected:0x17680 got:0x7618 2018-01-23T19:16:10.152Z,1516734970.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:10.512Z,1516734970.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:10.901Z,1516734970.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797 2018-01-23T19:16:10.929Z,1516734970.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:11.325Z,1516734971.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:11.712Z,1516734971.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:12.113Z,1516734972.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:12.518Z,1516734972.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:12.929Z,1516734972.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:13.317Z,1516734973.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:13.717Z,1516734973.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:14.117Z,1516734974.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:14.520Z,1516734974.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:14.913Z,1516734974.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:15.322Z,1516734975.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:15.718Z,1516734975.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:16.137Z,1516734976.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:16.532Z,1516734976.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:16.918Z,1516734976.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:17.299Z,1516734977.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:17.697Z,1516734977.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:18.097Z,1516734978.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:18.510Z,1516734978.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:18.934Z,1516734978.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:19.329Z,1516734979.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:19.710Z,1516734979.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:20.109Z,1516734980.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:20.505Z,1516734980.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:20.899Z,1516734980.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:21.327Z,1516734981.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:21.716Z,1516734981.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:22.120Z,1516734982.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:22.543Z,1516734982.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:22.901Z,1516734982.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:23.301Z,1516734983.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:23.714Z,1516734983.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:24.107Z,1516734984.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:24.510Z,1516734984.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:24.922Z,1516734984.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:25.314Z,1516734985.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:25.713Z,1516734985.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:26.113Z,1516734986.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:26.509Z,1516734986.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:26.909Z,1516734986.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:27.315Z,1516734987.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:27.727Z,1516734987.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:28.116Z,1516734988.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:28.519Z,1516734988.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:28.907Z,1516734988.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:29.313Z,1516734989.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:29.693Z,1516734989.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:30.096Z,1516734990.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:30.523Z,1516734990.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:30.936Z,1516734990.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:31.326Z,1516734991.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:31.703Z,1516734991.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:32.106Z,1516734992.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:32.499Z,1516734992.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:32.909Z,1516734992.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:33.305Z,1516734993.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:33.713Z,1516734993.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:34.117Z,1516734994.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:34.502Z,1516734994.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:37.611Z,1516734997.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:37.753Z,1516734997.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:38.113Z,1516734998.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:38.519Z,1516734998.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:38.908Z,1516734998.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:39.299Z,1516734999.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:39.709Z,1516734999.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:40.107Z,1516735000.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:40.516Z,1516735000.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:40.915Z,1516735000.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:41.317Z,1516735001.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:41.700Z,1516735001.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:42.088Z,1516735002.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:42.489Z,1516735002.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:42.916Z,1516735002.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:43.338Z,1516735003.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:43.729Z,1516735003.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:44.129Z,1516735004.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:44.537Z,1516735004.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:44.906Z,1516735004.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:45.337Z,1516735005.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:45.742Z,1516735005.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:46.125Z,1516735006.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:46.525Z,1516735006.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:46.957Z,1516735006.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:47.324Z,1516735007.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:47.729Z,1516735007.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:48.128Z,1516735008.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:48.505Z,1516735008.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:48.902Z,1516735008.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:49.326Z,1516735009.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:49.723Z,1516735009.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:50.134Z,1516735010.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:50.538Z,1516735010.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:50.933Z,1516735010.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:51.345Z,1516735011.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:51.783Z,1516735011.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:52.120Z,1516735012.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:52.537Z,1516735012.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:52.989Z,1516735012.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:53.325Z,1516735013.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:53.702Z,1516735013.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:54.128Z,1516735014.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:54.535Z,1516735014.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:54.906Z,1516735014.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:55.317Z,1516735015.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:55.713Z,1516735015.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:56.125Z,1516735016.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:56.521Z,1516735016.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:56.906Z,1516735016.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:57.311Z,1516735017.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:57.715Z,1516735017.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:58.126Z,1516735018.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:58.530Z,1516735018.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:58.948Z,1516735018.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:59.329Z,1516735019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:16:59.705Z,1516735019.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:00.102Z,1516735020.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:00.494Z,1516735020.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:00.922Z,1516735020.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:01.313Z,1516735021.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:01.713Z,1516735021.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:02.113Z,1516735022.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:02.533Z,1516735022.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:02.909Z,1516735022.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:03.320Z,1516735023.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:03.729Z,1516735023.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:04.114Z,1516735024.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:04.542Z,1516735024.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:04.556Z,1516735024.556 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:04.556Z,1516735024.556 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 319 2018-01-23T19:17:04.556Z,1516735024.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:17:04.586Z,1516735024.586 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:17:04.929Z,1516735024.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:04.979Z,1516735024.979 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:17:04.979Z,1516735024.979 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 319 2018-01-23T19:17:05.350Z,1516735025.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:05.351Z,1516735025.351 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:17:05.352Z,1516735025.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:17:05.352Z,1516735025.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:17:05.713Z,1516735025.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:06.106Z,1516735026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:06.498Z,1516735026.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:06.896Z,1516735026.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:07.316Z,1516735027.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:07.710Z,1516735027.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:08.121Z,1516735028.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:08.510Z,1516735028.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:08.906Z,1516735028.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:09.317Z,1516735029.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:09.717Z,1516735029.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:10.113Z,1516735030.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:10.500Z,1516735030.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:10.905Z,1516735030.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:11.321Z,1516735031.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:11.715Z,1516735031.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:12.118Z,1516735032.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:12.513Z,1516735032.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:12.917Z,1516735032.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:13.317Z,1516735033.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:13.725Z,1516735033.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:14.125Z,1516735034.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:14.496Z,1516735034.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:14.901Z,1516735034.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:15.323Z,1516735035.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:15.706Z,1516735035.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:16.127Z,1516735036.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:16.495Z,1516735036.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:16.895Z,1516735036.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:17.298Z,1516735037.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:17.702Z,1516735037.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:18.105Z,1516735038.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:18.497Z,1516735038.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:18.896Z,1516735038.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:19.305Z,1516735039.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:19.727Z,1516735039.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:20.098Z,1516735040.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:20.496Z,1516735040.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:20.895Z,1516735040.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:21.298Z,1516735041.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:21.702Z,1516735041.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:21.702Z,1516735041.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 319 2018-01-23T19:17:21.702Z,1516735041.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:17:21.704Z,1516735041.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:21.704Z,1516735041.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 319 2018-01-23T19:17:21.704Z,1516735041.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:17:21.745Z,1516735041.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:17:21.745Z,1516735041.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:17:22.112Z,1516735042.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:17:22.112Z,1516735042.112 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 319 2018-01-23T19:17:22.113Z,1516735042.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:17:22.113Z,1516735042.113 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 319 2018-01-23T19:17:22.503Z,1516735042.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:17:22.504Z,1516735042.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:17:22.504Z,1516735042.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:17:22.504Z,1516735042.504 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:17:22.505Z,1516735042.505 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:17:22.505Z,1516735042.505 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:17:22.896Z,1516735042.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:17:22.897Z,1516735042.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:23.312Z,1516735043.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:17:23.313Z,1516735043.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:23.716Z,1516735043.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:17:23.717Z,1516735043.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:24.107Z,1516735044.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:17:24.108Z,1516735044.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:24.505Z,1516735044.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:17:24.506Z,1516735044.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:24.904Z,1516735044.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:17:24.905Z,1516735044.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:25.312Z,1516735045.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:17:25.313Z,1516735045.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:25.713Z,1516735045.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:17:25.714Z,1516735045.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:26.106Z,1516735046.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:17:26.107Z,1516735046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:26.501Z,1516735046.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:17:26.502Z,1516735046.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:26.900Z,1516735046.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:17:26.900Z,1516735046.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:27.310Z,1516735047.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:17:27.315Z,1516735047.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:27.715Z,1516735047.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:17:27.716Z,1516735047.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:28.106Z,1516735048.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:17:28.107Z,1516735048.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:28.504Z,1516735048.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:17:28.505Z,1516735048.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:28.905Z,1516735048.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:17:28.906Z,1516735048.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:29.316Z,1516735049.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:17:29.317Z,1516735049.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:29.709Z,1516735049.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:17:29.710Z,1516735049.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:30.121Z,1516735050.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:17:30.122Z,1516735050.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:30.488Z,1516735050.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:17:30.489Z,1516735050.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:30.892Z,1516735050.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:17:30.893Z,1516735050.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:31.318Z,1516735051.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:17:31.319Z,1516735051.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:31.723Z,1516735051.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:17:31.724Z,1516735051.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:32.124Z,1516735052.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:17:32.125Z,1516735052.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:32.524Z,1516735052.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:17:32.525Z,1516735052.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:32.920Z,1516735052.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:17:32.921Z,1516735052.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:33.322Z,1516735053.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:17:33.323Z,1516735053.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:33.723Z,1516735053.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:17:33.724Z,1516735053.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:34.122Z,1516735054.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:17:34.123Z,1516735054.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:34.500Z,1516735054.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:17:34.501Z,1516735054.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:34.895Z,1516735054.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:17:34.896Z,1516735054.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:38.072Z,1516735058.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:17:38.073Z,1516735058.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:38.221Z,1516735058.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T19:17:38.222Z,1516735058.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:38.549Z,1516735058.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:17:38.550Z,1516735058.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:38.949Z,1516735058.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:17:38.950Z,1516735058.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:39.338Z,1516735059.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:17:39.339Z,1516735059.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:39.748Z,1516735059.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:17:39.748Z,1516735059.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:40.149Z,1516735060.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:17:40.150Z,1516735060.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:40.550Z,1516735060.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:17:40.551Z,1516735060.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:40.953Z,1516735060.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T19:17:40.954Z,1516735060.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:41.351Z,1516735061.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:17:41.352Z,1516735061.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:41.741Z,1516735061.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:42.141Z,1516735062.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:42.557Z,1516735062.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:42.945Z,1516735062.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:43.354Z,1516735063.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:43.763Z,1516735063.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:44.151Z,1516735064.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:44.549Z,1516735064.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:44.957Z,1516735064.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:45.361Z,1516735065.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:45.757Z,1516735065.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:46.167Z,1516735066.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:46.557Z,1516735066.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:46.935Z,1516735066.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:47.364Z,1516735067.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:47.762Z,1516735067.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:48.162Z,1516735068.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:48.565Z,1516735068.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:48.941Z,1516735068.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:49.346Z,1516735069.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:49.746Z,1516735069.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:50.154Z,1516735070.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:50.548Z,1516735070.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:50.944Z,1516735070.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:51.346Z,1516735071.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:51.746Z,1516735071.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:52.146Z,1516735072.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:52.542Z,1516735072.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:52.940Z,1516735072.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:53.347Z,1516735073.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:53.747Z,1516735073.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:54.146Z,1516735074.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:54.541Z,1516735074.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:54.939Z,1516735074.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:55.346Z,1516735075.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:55.746Z,1516735075.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:56.149Z,1516735076.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:56.549Z,1516735076.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:56.940Z,1516735076.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:57.349Z,1516735077.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:57.746Z,1516735077.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:58.145Z,1516735078.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:58.541Z,1516735078.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:58.939Z,1516735078.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:59.346Z,1516735079.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:17:59.751Z,1516735079.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:00.145Z,1516735080.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:00.541Z,1516735080.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:00.940Z,1516735080.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:01.353Z,1516735081.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:01.746Z,1516735081.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:02.153Z,1516735082.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:02.545Z,1516735082.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:02.940Z,1516735082.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:03.353Z,1516735083.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:03.751Z,1516735083.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:04.145Z,1516735084.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:04.544Z,1516735084.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:04.940Z,1516735084.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:05.353Z,1516735085.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:05.752Z,1516735085.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:06.153Z,1516735086.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:06.541Z,1516735086.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:06.945Z,1516735086.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:07.341Z,1516735087.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:07.746Z,1516735087.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:08.146Z,1516735088.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:08.547Z,1516735088.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:08.940Z,1516735088.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:09.341Z,1516735089.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:09.742Z,1516735089.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:10.140Z,1516735090.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:10.545Z,1516735090.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:10.953Z,1516735090.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:11.353Z,1516735091.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:11.742Z,1516735091.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:12.142Z,1516735092.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:12.544Z,1516735092.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:12.942Z,1516735092.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:13.340Z,1516735093.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:13.750Z,1516735093.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:14.154Z,1516735094.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:14.553Z,1516735094.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:14.940Z,1516735094.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:15.343Z,1516735095.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:15.742Z,1516735095.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:16.140Z,1516735096.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:16.563Z,1516735096.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:16.954Z,1516735096.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:17.363Z,1516735097.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:17.753Z,1516735097.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:18.153Z,1516735098.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:18.550Z,1516735098.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:18.942Z,1516735098.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:19.348Z,1516735099.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:19.754Z,1516735099.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:20.154Z,1516735100.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:20.551Z,1516735100.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:20.953Z,1516735100.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:21.348Z,1516735101.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:21.748Z,1516735101.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:22.152Z,1516735102.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:22.554Z,1516735102.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:22.954Z,1516735102.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:23.358Z,1516735103.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:23.749Z,1516735103.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:24.148Z,1516735104.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:24.545Z,1516735104.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:24.944Z,1516735104.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:25.348Z,1516735105.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:25.751Z,1516735105.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:26.154Z,1516735106.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:26.550Z,1516735106.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:26.943Z,1516735106.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:27.349Z,1516735107.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:27.744Z,1516735107.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:28.149Z,1516735108.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:28.555Z,1516735108.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:28.956Z,1516735108.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:29.355Z,1516735109.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:29.749Z,1516735109.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:30.152Z,1516735110.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:30.562Z,1516735110.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:30.952Z,1516735110.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:31.352Z,1516735111.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:31.770Z,1516735111.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:32.158Z,1516735112.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:32.561Z,1516735112.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:32.957Z,1516735112.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:33.329Z,1516735113.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:33.732Z,1516735113.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:34.135Z,1516735114.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:34.546Z,1516735114.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:34.970Z,1516735114.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:38.039Z,1516735118.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:38.173Z,1516735118.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:38.541Z,1516735118.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:38.941Z,1516735118.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:39.335Z,1516735119.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:39.745Z,1516735119.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:40.146Z,1516735120.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:40.545Z,1516735120.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:40.945Z,1516735120.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:41.337Z,1516735121.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:41.741Z,1516735121.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:42.137Z,1516735122.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:42.554Z,1516735122.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:42.953Z,1516735122.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:43.353Z,1516735123.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:43.741Z,1516735123.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:44.145Z,1516735124.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:44.548Z,1516735124.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:44.941Z,1516735124.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:45.379Z,1516735125.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:45.761Z,1516735125.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:46.154Z,1516735126.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:46.547Z,1516735126.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:46.949Z,1516735126.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:47.340Z,1516735127.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:47.741Z,1516735127.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:48.144Z,1516735128.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:48.549Z,1516735128.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:48.949Z,1516735128.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:49.346Z,1516735129.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:49.746Z,1516735129.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:50.148Z,1516735130.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:50.548Z,1516735130.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:50.950Z,1516735130.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:51.325Z,1516735131.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:51.749Z,1516735131.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:52.154Z,1516735132.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:52.548Z,1516735132.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:52.927Z,1516735132.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:53.327Z,1516735133.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:53.736Z,1516735133.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:54.137Z,1516735134.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:54.541Z,1516735134.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:54.942Z,1516735134.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:55.338Z,1516735135.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:55.734Z,1516735135.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:56.134Z,1516735136.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:56.534Z,1516735136.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:56.936Z,1516735136.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:57.334Z,1516735137.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:57.745Z,1516735137.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:58.141Z,1516735138.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:58.545Z,1516735138.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:58.935Z,1516735138.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:59.336Z,1516735139.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:18:59.737Z,1516735139.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:00.134Z,1516735140.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:00.549Z,1516735140.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:00.946Z,1516735140.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:01.345Z,1516735141.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:01.736Z,1516735141.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:02.141Z,1516735142.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:02.534Z,1516735142.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:02.936Z,1516735142.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:03.334Z,1516735143.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:03.741Z,1516735143.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:04.142Z,1516735144.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:04.545Z,1516735144.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:04.939Z,1516735144.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:05.336Z,1516735145.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:05.738Z,1516735145.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:06.135Z,1516735146.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:06.549Z,1516735146.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:06.942Z,1516735146.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:07.345Z,1516735147.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:07.740Z,1516735147.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:08.141Z,1516735148.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:08.545Z,1516735148.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:08.937Z,1516735148.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:09.336Z,1516735149.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:09.748Z,1516735149.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:10.146Z,1516735150.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:10.548Z,1516735150.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:10.935Z,1516735150.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:11.336Z,1516735151.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:11.743Z,1516735151.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:12.136Z,1516735152.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:12.553Z,1516735152.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:12.948Z,1516735152.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:13.348Z,1516735153.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:13.736Z,1516735153.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:14.135Z,1516735154.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:14.535Z,1516735154.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:14.936Z,1516735154.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:15.337Z,1516735155.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:15.746Z,1516735155.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:16.145Z,1516735156.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:16.551Z,1516735156.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:16.936Z,1516735156.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:17.337Z,1516735157.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:17.741Z,1516735157.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:18.144Z,1516735158.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:18.547Z,1516735158.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:18.950Z,1516735158.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:19.348Z,1516735159.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:19.744Z,1516735159.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:20.145Z,1516735160.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:20.538Z,1516735160.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:20.937Z,1516735160.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:21.338Z,1516735161.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:21.751Z,1516735161.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:22.151Z,1516735162.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:22.549Z,1516735162.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:22.944Z,1516735162.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:23.349Z,1516735163.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:23.744Z,1516735163.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:24.144Z,1516735164.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:24.551Z,1516735164.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:24.950Z,1516735164.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:25.354Z,1516735165.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:25.740Z,1516735165.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:26.149Z,1516735166.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:26.542Z,1516735166.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:26.946Z,1516735166.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:27.356Z,1516735167.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:27.746Z,1516735167.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:28.153Z,1516735168.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:28.558Z,1516735168.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:28.937Z,1516735168.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:29.339Z,1516735169.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:29.737Z,1516735169.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:30.144Z,1516735170.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:30.557Z,1516735170.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:30.951Z,1516735170.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:31.361Z,1516735171.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:31.743Z,1516735171.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:32.145Z,1516735172.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:32.541Z,1516735172.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:32.950Z,1516735172.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:33.337Z,1516735173.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:33.746Z,1516735173.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:34.159Z,1516735174.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:34.550Z,1516735174.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:34.944Z,1516735174.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:35.355Z,1516735175.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:38.445Z,1516735178.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:38.548Z,1516735178.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:38.918Z,1516735178.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:39.336Z,1516735179.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:39.714Z,1516735179.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:40.112Z,1516735180.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:40.510Z,1516735180.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:40.913Z,1516735180.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:41.311Z,1516735181.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:41.718Z,1516735181.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:42.118Z,1516735182.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:42.521Z,1516735182.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:42.912Z,1516735182.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:43.312Z,1516735183.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:43.721Z,1516735183.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:44.112Z,1516735184.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:44.518Z,1516735184.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:44.918Z,1516735184.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:45.324Z,1516735185.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:45.716Z,1516735185.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:46.112Z,1516735186.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:46.524Z,1516735186.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:46.919Z,1516735186.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:47.325Z,1516735187.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:47.713Z,1516735187.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:48.112Z,1516735188.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:48.521Z,1516735188.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:48.918Z,1516735188.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:49.321Z,1516735189.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:49.713Z,1516735189.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:50.112Z,1516735190.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:50.525Z,1516735190.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:50.925Z,1516735190.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:51.325Z,1516735191.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:51.712Z,1516735191.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:52.111Z,1516735192.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:52.528Z,1516735192.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:52.922Z,1516735192.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:53.329Z,1516735193.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:53.713Z,1516735193.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:54.114Z,1516735194.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:54.522Z,1516735194.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:54.921Z,1516735194.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:55.327Z,1516735195.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:55.714Z,1516735195.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:56.134Z,1516735196.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:56.514Z,1516735196.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:56.927Z,1516735196.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:57.331Z,1516735197.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:57.725Z,1516735197.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:58.117Z,1516735198.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:58.523Z,1516735198.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:58.921Z,1516735198.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:59.320Z,1516735199.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:19:59.729Z,1516735199.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:00.130Z,1516735200.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:00.529Z,1516735200.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:00.916Z,1516735200.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:01.320Z,1516735201.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:01.720Z,1516735201.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:02.126Z,1516735202.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:02.510Z,1516735202.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:02.923Z,1516735202.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:03.327Z,1516735203.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:03.728Z,1516735203.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:04.129Z,1516735204.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:04.520Z,1516735204.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:04.918Z,1516735204.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:05.320Z,1516735205.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:05.735Z,1516735205.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:05.737Z,1516735205.737 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:05.737Z,1516735205.737 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 320 2018-01-23T19:20:05.737Z,1516735205.737 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:20:05.757Z,1516735205.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:20:06.126Z,1516735206.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:06.139Z,1516735206.139 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:20:06.139Z,1516735206.139 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 320 2018-01-23T19:20:06.528Z,1516735206.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:06.530Z,1516735206.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:20:06.530Z,1516735206.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:20:06.530Z,1516735206.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:20:06.924Z,1516735206.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:07.323Z,1516735207.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:07.719Z,1516735207.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:08.126Z,1516735208.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:08.515Z,1516735208.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:08.930Z,1516735208.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:09.334Z,1516735209.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:09.729Z,1516735209.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:10.121Z,1516735210.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:10.527Z,1516735210.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:10.917Z,1516735210.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:11.321Z,1516735211.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:11.724Z,1516735211.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:12.125Z,1516735212.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:12.529Z,1516735212.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:12.925Z,1516735212.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:13.314Z,1516735213.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:13.723Z,1516735213.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:14.121Z,1516735214.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:14.513Z,1516735214.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:14.931Z,1516735214.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:15.326Z,1516735215.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:15.726Z,1516735215.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:16.125Z,1516735216.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:16.522Z,1516735216.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:16.914Z,1516735216.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:17.323Z,1516735217.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:17.737Z,1516735217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:18.131Z,1516735218.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:18.533Z,1516735218.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:18.919Z,1516735218.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:19.317Z,1516735219.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:19.725Z,1516735219.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:20.130Z,1516735220.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:20.516Z,1516735220.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:20.933Z,1516735220.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:21.334Z,1516735221.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:21.726Z,1516735221.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:22.120Z,1516735222.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:22.526Z,1516735222.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:22.526Z,1516735222.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 320 2018-01-23T19:20:22.526Z,1516735222.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:20:22.528Z,1516735222.528 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:22.528Z,1516735222.528 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 320 2018-01-23T19:20:22.528Z,1516735222.528 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:20:22.541Z,1516735222.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:20:22.541Z,1516735222.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:20:22.928Z,1516735222.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:20:22.928Z,1516735222.928 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 320 2018-01-23T19:20:22.929Z,1516735222.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:20:22.929Z,1516735222.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 320 2018-01-23T19:20:23.298Z,1516735223.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x54625 got:0x17072 2018-01-23T19:20:23.332Z,1516735223.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:20:23.332Z,1516735223.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:20:23.332Z,1516735223.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:20:23.333Z,1516735223.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:20:23.333Z,1516735223.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:20:23.333Z,1516735223.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:20:23.731Z,1516735223.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:20:23.732Z,1516735223.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:24.131Z,1516735224.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:20:24.132Z,1516735224.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:24.536Z,1516735224.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:20:24.537Z,1516735224.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:24.919Z,1516735224.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:20:24.920Z,1516735224.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:25.306Z,1516735225.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:20:25.307Z,1516735225.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:25.711Z,1516735225.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:20:25.712Z,1516735225.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:26.144Z,1516735226.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:20:26.145Z,1516735226.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:26.510Z,1516735226.510 [PNI_TCM](ERROR): CRC does not match. Expected:0x18224 got:0x24031 2018-01-23T19:20:26.540Z,1516735226.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:20:26.541Z,1516735226.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:26.935Z,1516735226.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:20:26.936Z,1516735226.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:27.344Z,1516735227.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:20:27.345Z,1516735227.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:27.744Z,1516735227.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:20:27.745Z,1516735227.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:28.117Z,1516735228.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:20:28.118Z,1516735228.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:28.527Z,1516735228.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:20:28.528Z,1516735228.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:28.915Z,1516735228.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:20:28.916Z,1516735228.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:29.336Z,1516735229.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:20:29.337Z,1516735229.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:29.720Z,1516735229.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:20:29.721Z,1516735229.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:30.124Z,1516735230.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:20:30.125Z,1516735230.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:30.520Z,1516735230.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:20:30.521Z,1516735230.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:30.924Z,1516735230.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:20:30.925Z,1516735230.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:31.318Z,1516735231.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:20:31.319Z,1516735231.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:31.718Z,1516735231.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:20:31.719Z,1516735231.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:32.116Z,1516735232.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:20:32.117Z,1516735232.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:32.528Z,1516735232.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:20:32.529Z,1516735232.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:32.924Z,1516735232.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:20:32.925Z,1516735232.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:33.324Z,1516735233.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:20:33.325Z,1516735233.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:33.728Z,1516735233.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:20:33.728Z,1516735233.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:33.732Z,1516735233.732 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:15:33.3Z 2018-01-23T19:20:33.732Z,1516735233.732 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T19:20:33.732Z,1516735233.732 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T19:20:34.126Z,1516735234.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:20:34.126Z,1516735234.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:34.640Z,1516735234.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T19:20:34.641Z,1516735234.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:34.919Z,1516735234.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:20:34.920Z,1516735234.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:38.013Z,1516735238.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T19:20:38.014Z,1516735238.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:38.098Z,1516735238.098 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0376.lzma 2018-01-23T19:20:38.211Z,1516735238.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T19:20:38.212Z,1516735238.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:38.512Z,1516735238.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:20:38.513Z,1516735238.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:38.838Z,1516735238.838 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0376.lzma.bak 2018-01-23T19:20:38.838Z,1516735238.838 [DataOverHttps](INFO): SBD MOMSN=7756496 2018-01-23T19:20:38.907Z,1516735238.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:20:38.908Z,1516735238.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:39.532Z,1516735239.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s. 2018-01-23T19:20:39.533Z,1516735239.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:39.696Z,1516735239.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:20:39.697Z,1516735239.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:42.783Z,1516735242.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:42.924Z,1516735242.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:43.270Z,1516735243.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:43.674Z,1516735243.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:44.073Z,1516735244.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:44.472Z,1516735244.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:47.767Z,1516735247.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:50.496Z,1516735250.496 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0377.lzma 2018-01-23T19:20:50.536Z,1516735250.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:50.650Z,1516735250.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:51.458Z,1516735251.458 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0377.lzma.bak 2018-01-23T19:20:51.458Z,1516735251.458 [DataOverHttps](INFO): SBD MOMSN=7756498 2018-01-23T19:20:51.556Z,1516735251.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:52.068Z,1516735252.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:52.071Z,1516735252.071 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:20:52.071Z,1516735252.071 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:20:52.071Z,1516735252.071 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:20:52.186Z,1516735252.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:55.241Z,1516735255.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:55.374Z,1516735255.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:55.765Z,1516735255.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:56.136Z,1516735256.136 [PNI_TCM](ERROR): CRC does not match. Expected:0x55038 got:0x7233 2018-01-23T19:20:56.171Z,1516735256.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:56.566Z,1516735256.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:56.929Z,1516735256.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:57.340Z,1516735257.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:57.734Z,1516735257.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:58.136Z,1516735258.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:58.536Z,1516735258.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:58.944Z,1516735258.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:59.344Z,1516735259.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:20:59.750Z,1516735259.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:00.137Z,1516735260.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:00.529Z,1516735260.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:00.935Z,1516735260.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:01.337Z,1516735261.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:01.745Z,1516735261.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:02.146Z,1516735262.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:02.545Z,1516735262.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:02.941Z,1516735262.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:03.333Z,1516735263.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:03.731Z,1516735263.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:04.131Z,1516735264.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:04.530Z,1516735264.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:04.938Z,1516735264.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:05.342Z,1516735265.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:05.744Z,1516735265.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:06.130Z,1516735266.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:06.541Z,1516735266.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:06.929Z,1516735266.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:07.333Z,1516735267.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:07.739Z,1516735267.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:08.158Z,1516735268.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:08.538Z,1516735268.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:08.933Z,1516735268.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:09.331Z,1516735269.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:09.733Z,1516735269.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:10.135Z,1516735270.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:10.536Z,1516735270.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:10.942Z,1516735270.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:11.342Z,1516735271.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:11.738Z,1516735271.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:12.130Z,1516735272.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:12.536Z,1516735272.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:12.937Z,1516735272.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:13.330Z,1516735273.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:13.741Z,1516735273.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:14.144Z,1516735274.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:14.541Z,1516735274.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:14.936Z,1516735274.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:15.338Z,1516735275.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:15.736Z,1516735275.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:16.129Z,1516735276.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:16.539Z,1516735276.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:16.943Z,1516735276.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:17.346Z,1516735277.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:17.757Z,1516735277.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:18.117Z,1516735278.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:18.541Z,1516735278.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:18.925Z,1516735278.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:19.321Z,1516735279.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:19.752Z,1516735279.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:20.159Z,1516735280.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:20.534Z,1516735280.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:20.927Z,1516735280.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:21.336Z,1516735281.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:21.726Z,1516735281.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:22.128Z,1516735282.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:22.527Z,1516735282.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:22.935Z,1516735282.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:23.334Z,1516735283.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:23.740Z,1516735283.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:24.132Z,1516735284.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:24.527Z,1516735284.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:24.928Z,1516735284.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:25.326Z,1516735285.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:25.737Z,1516735285.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:26.137Z,1516735286.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:26.537Z,1516735286.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:26.929Z,1516735286.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:27.328Z,1516735287.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:27.727Z,1516735287.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:28.130Z,1516735288.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:28.527Z,1516735288.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:28.937Z,1516735288.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:29.341Z,1516735289.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:29.744Z,1516735289.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:30.128Z,1516735290.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:30.529Z,1516735290.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:30.932Z,1516735290.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:31.325Z,1516735291.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:31.745Z,1516735291.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:32.145Z,1516735292.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:32.569Z,1516735292.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:32.928Z,1516735292.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:33.339Z,1516735293.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:33.735Z,1516735293.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:34.135Z,1516735294.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:34.536Z,1516735294.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:34.941Z,1516735294.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:35.342Z,1516735295.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:35.748Z,1516735295.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:36.139Z,1516735296.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:36.541Z,1516735296.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:36.932Z,1516735296.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:37.329Z,1516735297.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:37.738Z,1516735297.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:38.142Z,1516735298.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:38.539Z,1516735298.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:38.935Z,1516735298.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:39.339Z,1516735299.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:39.738Z,1516735299.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:40.187Z,1516735300.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:40.553Z,1516735300.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:40.937Z,1516735300.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:41.350Z,1516735301.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:41.755Z,1516735301.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:42.162Z,1516735302.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:42.561Z,1516735302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:42.997Z,1516735302.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:43.340Z,1516735303.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:43.769Z,1516735303.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:44.172Z,1516735304.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:44.567Z,1516735304.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:44.981Z,1516735304.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:45.388Z,1516735305.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:45.761Z,1516735305.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:46.173Z,1516735306.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:46.607Z,1516735306.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:46.936Z,1516735306.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:47.380Z,1516735307.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:47.796Z,1516735307.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:48.139Z,1516735308.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:48.551Z,1516735308.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:48.961Z,1516735308.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:49.353Z,1516735309.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:49.761Z,1516735309.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:50.162Z,1516735310.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:50.555Z,1516735310.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:50.941Z,1516735310.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:51.364Z,1516735311.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:51.756Z,1516735311.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:52.165Z,1516735312.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:52.587Z,1516735312.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:58.500Z,1516735318.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:58.660Z,1516735318.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:59.064Z,1516735319.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:59.434Z,1516735319.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:21:59.842Z,1516735319.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:00.238Z,1516735320.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:00.633Z,1516735320.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:01.026Z,1516735321.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:01.408Z,1516735321.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:01.832Z,1516735321.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:02.207Z,1516735322.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:02.602Z,1516735322.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:02.999Z,1516735322.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:03.402Z,1516735323.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:03.804Z,1516735323.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:04.202Z,1516735324.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:04.599Z,1516735324.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:05.012Z,1516735325.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:05.411Z,1516735325.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:05.810Z,1516735325.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:06.201Z,1516735326.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:06.602Z,1516735326.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:07.003Z,1516735327.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:07.405Z,1516735327.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:07.812Z,1516735327.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:08.209Z,1516735328.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:08.610Z,1516735328.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:08.000Z,1516735329.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:09.408Z,1516735329.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:09.805Z,1516735329.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:10.202Z,1516735330.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:10.599Z,1516735330.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:11.011Z,1516735331.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:11.413Z,1516735331.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:11.813Z,1516735331.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:12.200Z,1516735332.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:12.598Z,1516735332.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:13.002Z,1516735333.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:13.400Z,1516735333.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:13.817Z,1516735333.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:14.221Z,1516735334.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:14.611Z,1516735334.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:15.001Z,1516735335.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:15.402Z,1516735335.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:15.805Z,1516735335.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:16.202Z,1516735336.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:16.605Z,1516735336.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:17.011Z,1516735337.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:17.414Z,1516735337.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:17.811Z,1516735337.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:18.214Z,1516735338.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:18.597Z,1516735338.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:19.010Z,1516735339.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:19.413Z,1516735339.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:19.820Z,1516735339.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:20.217Z,1516735340.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:20.621Z,1516735340.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:21.013Z,1516735341.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:21.397Z,1516735341.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:21.796Z,1516735341.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:22.198Z,1516735342.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:22.625Z,1516735342.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:23.067Z,1516735343.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:23.418Z,1516735343.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:23.810Z,1516735343.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:24.209Z,1516735344.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:24.609Z,1516735344.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:25.006Z,1516735345.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:25.410Z,1516735345.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:25.816Z,1516735345.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:26.229Z,1516735346.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:26.619Z,1516735346.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:27.007Z,1516735347.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:27.417Z,1516735347.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:27.809Z,1516735347.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:28.209Z,1516735348.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:28.612Z,1516735348.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:29.022Z,1516735349.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:29.423Z,1516735349.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:29.815Z,1516735349.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:30.213Z,1516735350.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:30.589Z,1516735350.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:30.992Z,1516735350.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:31.391Z,1516735351.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:31.820Z,1516735351.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:32.226Z,1516735352.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:32.632Z,1516735352.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:32.000Z,1516735353.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:33.397Z,1516735353.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:33.830Z,1516735353.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:34.206Z,1516735354.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:34.606Z,1516735354.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:35.000Z,1516735355.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:35.400Z,1516735355.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:35.802Z,1516735355.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:36.205Z,1516735356.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:36.602Z,1516735356.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:37.003Z,1516735357.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:37.401Z,1516735357.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:37.803Z,1516735357.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:38.206Z,1516735358.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:38.606Z,1516735358.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:39.002Z,1516735359.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:39.399Z,1516735359.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:39.806Z,1516735359.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:40.207Z,1516735360.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:40.607Z,1516735360.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:41.002Z,1516735361.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:41.399Z,1516735361.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:41.813Z,1516735361.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:42.209Z,1516735362.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:42.605Z,1516735362.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:43.001Z,1516735363.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:43.400Z,1516735363.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:43.813Z,1516735363.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:44.210Z,1516735364.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:44.606Z,1516735364.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:45.002Z,1516735365.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:45.400Z,1516735365.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:45.807Z,1516735365.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:46.213Z,1516735366.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:46.605Z,1516735366.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:47.014Z,1516735367.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:47.404Z,1516735367.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:47.813Z,1516735367.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:48.220Z,1516735368.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:48.617Z,1516735368.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:49.006Z,1516735369.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:49.403Z,1516735369.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:49.817Z,1516735369.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:50.216Z,1516735370.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:50.611Z,1516735370.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:51.007Z,1516735371.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:51.407Z,1516735371.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:51.823Z,1516735371.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:52.213Z,1516735372.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:52.613Z,1516735372.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:55.709Z,1516735375.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:55.833Z,1516735375.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:56.206Z,1516735376.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:56.603Z,1516735376.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:56.978Z,1516735376.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:57.381Z,1516735377.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:57.782Z,1516735377.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:58.189Z,1516735378.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:58.589Z,1516735378.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:58.987Z,1516735378.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:59.386Z,1516735379.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:22:59.787Z,1516735379.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:00.186Z,1516735380.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:00.576Z,1516735380.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:00.980Z,1516735380.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:01.385Z,1516735381.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:01.785Z,1516735381.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:02.192Z,1516735382.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:02.605Z,1516735382.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:02.987Z,1516735382.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:03.380Z,1516735383.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:03.797Z,1516735383.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:04.184Z,1516735384.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:04.594Z,1516735384.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:04.999Z,1516735384.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:05.395Z,1516735385.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:05.802Z,1516735385.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:06.191Z,1516735386.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:06.588Z,1516735386.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:06.590Z,1516735386.590 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:06.591Z,1516735386.591 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 321 2018-01-23T19:23:06.591Z,1516735386.591 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:23:06.603Z,1516735386.603 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:23:06.984Z,1516735386.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:07.009Z,1516735387.009 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:23:07.009Z,1516735387.009 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 321 2018-01-23T19:23:07.369Z,1516735387.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:07.370Z,1516735387.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:23:07.391Z,1516735387.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:23:07.391Z,1516735387.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:23:07.776Z,1516735387.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:08.204Z,1516735388.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:08.605Z,1516735388.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:09.005Z,1516735389.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:09.380Z,1516735389.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:09.810Z,1516735389.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:10.181Z,1516735390.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:10.577Z,1516735390.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:10.984Z,1516735390.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:11.390Z,1516735391.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:11.794Z,1516735391.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:12.178Z,1516735392.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:12.579Z,1516735392.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:12.978Z,1516735392.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:13.379Z,1516735393.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:13.781Z,1516735393.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:14.191Z,1516735394.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:14.592Z,1516735394.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:14.991Z,1516735394.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:15.385Z,1516735395.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:15.781Z,1516735395.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:16.182Z,1516735396.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:16.584Z,1516735396.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:16.988Z,1516735396.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:17.399Z,1516735397.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:17.790Z,1516735397.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:18.181Z,1516735398.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:18.577Z,1516735398.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:18.984Z,1516735398.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:19.381Z,1516735399.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:19.777Z,1516735399.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:20.197Z,1516735400.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:20.595Z,1516735400.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:20.991Z,1516735400.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:21.379Z,1516735401.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:21.792Z,1516735401.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:22.182Z,1516735402.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:22.582Z,1516735402.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:22.992Z,1516735402.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:23.391Z,1516735403.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:23.392Z,1516735403.392 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 321 2018-01-23T19:23:23.392Z,1516735403.392 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:23:23.393Z,1516735403.393 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:23.394Z,1516735403.394 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 321 2018-01-23T19:23:23.394Z,1516735403.394 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:23:23.406Z,1516735403.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:23:23.407Z,1516735403.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:23:23.809Z,1516735403.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:23:23.809Z,1516735403.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 321 2018-01-23T19:23:23.809Z,1516735403.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:23:23.809Z,1516735403.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 321 2018-01-23T19:23:24.185Z,1516735404.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:23:24.185Z,1516735404.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:23:24.186Z,1516735404.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:23:24.186Z,1516735404.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:23:24.187Z,1516735404.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:23:24.187Z,1516735404.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:23:24.592Z,1516735404.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:23:24.593Z,1516735404.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:24.992Z,1516735404.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:23:24.993Z,1516735404.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:25.394Z,1516735405.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:23:25.395Z,1516735405.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:25.789Z,1516735405.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:23:25.790Z,1516735405.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:26.192Z,1516735406.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:23:26.193Z,1516735406.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:26.594Z,1516735406.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:23:26.596Z,1516735406.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:26.995Z,1516735406.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:23:26.996Z,1516735406.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:27.372Z,1516735407.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:23:27.373Z,1516735407.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:27.775Z,1516735407.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:23:27.776Z,1516735407.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:28.174Z,1516735408.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:23:28.175Z,1516735408.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:28.572Z,1516735408.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:23:28.573Z,1516735408.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:28.981Z,1516735408.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:23:28.982Z,1516735408.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:29.401Z,1516735409.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:23:29.402Z,1516735409.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:29.782Z,1516735409.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:23:29.791Z,1516735409.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:30.175Z,1516735410.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:23:30.176Z,1516735410.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:30.576Z,1516735410.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:23:30.577Z,1516735410.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:30.977Z,1516735410.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:23:30.978Z,1516735410.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:31.377Z,1516735411.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:23:31.378Z,1516735411.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:31.788Z,1516735411.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:23:31.789Z,1516735411.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:32.189Z,1516735412.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:23:32.190Z,1516735412.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:32.589Z,1516735412.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:23:32.590Z,1516735412.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:32.986Z,1516735412.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:23:32.988Z,1516735412.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:33.377Z,1516735413.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:23:33.379Z,1516735413.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:33.780Z,1516735413.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:23:33.781Z,1516735413.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:34.181Z,1516735414.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:23:34.182Z,1516735414.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:34.574Z,1516735414.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:23:34.575Z,1516735414.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:34.993Z,1516735414.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:23:34.994Z,1516735414.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:35.392Z,1516735415.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:23:35.393Z,1516735415.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:35.786Z,1516735415.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:23:35.787Z,1516735415.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:36.176Z,1516735416.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:23:36.177Z,1516735416.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:36.576Z,1516735416.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:23:36.577Z,1516735416.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:36.985Z,1516735416.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:23:36.986Z,1516735416.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:37.382Z,1516735417.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:23:37.383Z,1516735417.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:37.780Z,1516735417.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:23:37.781Z,1516735417.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:38.186Z,1516735418.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:23:38.191Z,1516735418.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:38.590Z,1516735418.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:23:38.591Z,1516735418.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:38.986Z,1516735418.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:23:38.987Z,1516735418.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:39.383Z,1516735419.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:23:39.384Z,1516735419.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:39.788Z,1516735419.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:23:39.789Z,1516735419.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:40.187Z,1516735420.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:23:40.188Z,1516735420.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:40.577Z,1516735420.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:23:40.578Z,1516735420.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:40.996Z,1516735420.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:23:40.997Z,1516735420.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:41.400Z,1516735421.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:23:41.401Z,1516735421.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:41.792Z,1516735421.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:23:41.793Z,1516735421.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:42.191Z,1516735422.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:23:42.192Z,1516735422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:42.574Z,1516735422.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:23:42.579Z,1516735422.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:42.984Z,1516735422.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:23:42.985Z,1516735422.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:43.393Z,1516735423.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:43.788Z,1516735423.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:44.196Z,1516735424.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:44.593Z,1516735424.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:44.996Z,1516735424.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:45.384Z,1516735425.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:45.768Z,1516735425.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:46.169Z,1516735426.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:46.600Z,1516735426.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:47.007Z,1516735427.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:47.405Z,1516735427.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:47.805Z,1516735427.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:48.180Z,1516735428.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:48.569Z,1516735428.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:48.980Z,1516735428.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:49.374Z,1516735429.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:49.778Z,1516735429.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:50.182Z,1516735430.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:50.607Z,1516735430.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:51.006Z,1516735431.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:51.378Z,1516735431.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:51.777Z,1516735431.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:52.185Z,1516735432.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:52.577Z,1516735432.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:52.988Z,1516735432.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:56.046Z,1516735436.046 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:23:56.046Z,1516735436.046 [NAL9602] Data Fault, FailCount= 3 2018-01-23T19:23:56.046Z,1516735436.046 [NAL9602](ERROR): Data Fault 2018-01-23T19:23:56.079Z,1516735436.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:56.113Z,1516735436.113 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:23:56.171Z,1516735436.171 [NAL9602](INFO): Powering down 2018-01-23T19:23:56.237Z,1516735436.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:56.577Z,1516735436.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:56.972Z,1516735436.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:56.984Z,1516735436.984 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:23:56.985Z,1516735436.985 [NAL9602] No Fault, FailCount= 3 2018-01-23T19:23:57.370Z,1516735437.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:57.778Z,1516735437.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:58.172Z,1516735438.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:58.573Z,1516735438.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:58.978Z,1516735438.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:59.369Z,1516735439.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:23:59.776Z,1516735439.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:00.178Z,1516735440.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:00.573Z,1516735440.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:00.970Z,1516735440.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:01.369Z,1516735441.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:01.772Z,1516735441.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:02.173Z,1516735442.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:02.576Z,1516735442.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:02.972Z,1516735442.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:03.376Z,1516735443.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:03.776Z,1516735443.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:04.172Z,1516735444.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:04.573Z,1516735444.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:04.977Z,1516735444.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:05.376Z,1516735445.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:05.770Z,1516735445.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:06.172Z,1516735446.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:06.581Z,1516735446.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:06.970Z,1516735446.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:07.380Z,1516735447.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:07.772Z,1516735447.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:08.173Z,1516735448.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:08.569Z,1516735448.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:08.967Z,1516735448.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:09.369Z,1516735449.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:09.769Z,1516735449.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:10.173Z,1516735450.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:10.573Z,1516735450.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:10.969Z,1516735450.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:11.368Z,1516735451.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:11.770Z,1516735451.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:12.170Z,1516735452.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:12.573Z,1516735452.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:12.972Z,1516735452.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:13.376Z,1516735453.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:13.775Z,1516735453.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:14.172Z,1516735454.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:14.569Z,1516735454.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:14.973Z,1516735454.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:15.369Z,1516735455.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:15.769Z,1516735455.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:16.173Z,1516735456.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:16.569Z,1516735456.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:16.969Z,1516735456.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:17.377Z,1516735457.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:17.769Z,1516735457.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:18.169Z,1516735458.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:18.573Z,1516735458.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:18.970Z,1516735458.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:19.370Z,1516735459.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:19.773Z,1516735459.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:20.172Z,1516735460.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:20.576Z,1516735460.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:20.969Z,1516735460.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:21.369Z,1516735461.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:21.779Z,1516735461.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:22.170Z,1516735462.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:22.577Z,1516735462.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:22.977Z,1516735462.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:23.382Z,1516735463.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:23.773Z,1516735463.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:24.177Z,1516735464.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:24.580Z,1516735464.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:24.977Z,1516735464.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:25.377Z,1516735465.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:25.777Z,1516735465.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:26.172Z,1516735466.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:26.524Z,1516735466.524 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:24:26.576Z,1516735466.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:26.978Z,1516735466.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:27.369Z,1516735467.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:27.785Z,1516735467.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:28.173Z,1516735468.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:28.554Z,1516735468.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:28.961Z,1516735468.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:29.360Z,1516735469.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:29.765Z,1516735469.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:30.169Z,1516735470.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:30.567Z,1516735470.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:30.976Z,1516735470.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:31.377Z,1516735471.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:31.769Z,1516735471.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:32.169Z,1516735472.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:32.573Z,1516735472.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:32.968Z,1516735472.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:33.365Z,1516735473.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:33.771Z,1516735473.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:34.172Z,1516735474.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:34.564Z,1516735474.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:34.967Z,1516735474.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:35.372Z,1516735475.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:35.769Z,1516735475.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:36.174Z,1516735476.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:36.567Z,1516735476.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:36.973Z,1516735476.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:37.003Z,1516735477.003 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:24:37.328Z,1516735477.328 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:24:37.381Z,1516735477.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:37.768Z,1516735477.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:38.178Z,1516735478.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:38.578Z,1516735478.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:38.976Z,1516735478.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:39.372Z,1516735479.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:39.771Z,1516735479.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:40.176Z,1516735480.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:40.580Z,1516735480.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:40.987Z,1516735480.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:41.379Z,1516735481.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:41.772Z,1516735481.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:42.189Z,1516735482.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:42.573Z,1516735482.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:42.974Z,1516735482.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:43.383Z,1516735483.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:43.788Z,1516735483.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:44.180Z,1516735484.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:44.577Z,1516735484.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:44.971Z,1516735484.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:45.373Z,1516735485.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:45.775Z,1516735485.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:46.179Z,1516735486.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:46.588Z,1516735486.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:46.989Z,1516735486.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:47.379Z,1516735487.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:47.780Z,1516735487.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:48.180Z,1516735488.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:48.581Z,1516735488.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:48.971Z,1516735488.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:49.387Z,1516735489.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:49.799Z,1516735489.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:50.196Z,1516735490.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:50.576Z,1516735490.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:50.972Z,1516735490.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:51.366Z,1516735491.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:51.769Z,1516735491.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:52.170Z,1516735492.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:52.571Z,1516735492.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:52.974Z,1516735492.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:53.401Z,1516735493.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:56.467Z,1516735496.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:56.606Z,1516735496.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:56.965Z,1516735496.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:57.363Z,1516735497.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:57.759Z,1516735497.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:58.133Z,1516735498.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:58.559Z,1516735498.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:58.928Z,1516735498.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x14037 got:0x13929 2018-01-23T19:24:58.961Z,1516735498.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:59.360Z,1516735499.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:24:59.742Z,1516735499.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:00.165Z,1516735500.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:00.538Z,1516735500.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:00.936Z,1516735500.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:01.333Z,1516735501.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:01.765Z,1516735501.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:02.136Z,1516735502.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:02.545Z,1516735502.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:02.949Z,1516735502.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:03.353Z,1516735503.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:03.730Z,1516735503.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x26170 got:0x6268 2018-01-23T19:25:03.776Z,1516735503.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:04.137Z,1516735504.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:04.537Z,1516735504.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:04.949Z,1516735504.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:05.349Z,1516735505.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:05.750Z,1516735505.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:06.149Z,1516735506.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:06.548Z,1516735506.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:06.941Z,1516735506.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:07.335Z,1516735507.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:07.749Z,1516735507.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:08.149Z,1516735508.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:08.557Z,1516735508.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:08.953Z,1516735508.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:09.349Z,1516735509.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:09.755Z,1516735509.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:10.142Z,1516735510.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:10.544Z,1516735510.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:10.946Z,1516735510.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:11.361Z,1516735511.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:11.753Z,1516735511.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:12.145Z,1516735512.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:12.549Z,1516735512.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:12.946Z,1516735512.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:13.333Z,1516735513.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:13.746Z,1516735513.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:14.140Z,1516735514.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:14.561Z,1516735514.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:14.953Z,1516735514.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:15.350Z,1516735515.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:15.738Z,1516735515.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:16.140Z,1516735516.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:16.548Z,1516735516.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:16.953Z,1516735516.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:17.338Z,1516735517.338 [PNI_TCM](ERROR): CRC does not match. Expected:0x21559 got:0x6466 2018-01-23T19:25:17.380Z,1516735517.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:17.776Z,1516735517.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:18.141Z,1516735518.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:18.546Z,1516735518.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:18.943Z,1516735518.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:19.349Z,1516735519.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:19.736Z,1516735519.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:20.150Z,1516735520.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:20.553Z,1516735520.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:20.979Z,1516735520.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:21.341Z,1516735521.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:21.737Z,1516735521.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:22.140Z,1516735522.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:22.540Z,1516735522.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:22.939Z,1516735522.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:23.344Z,1516735523.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:23.753Z,1516735523.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:24.161Z,1516735524.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:24.541Z,1516735524.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:24.935Z,1516735524.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:25.343Z,1516735525.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:25.739Z,1516735525.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:26.143Z,1516735526.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:26.543Z,1516735526.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:26.950Z,1516735526.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:27.342Z,1516735527.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:27.737Z,1516735527.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:28.137Z,1516735528.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:28.542Z,1516735528.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:28.937Z,1516735528.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:29.352Z,1516735529.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:29.746Z,1516735529.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:30.153Z,1516735530.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:30.537Z,1516735530.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:30.943Z,1516735530.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:31.329Z,1516735531.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:31.740Z,1516735531.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:32.146Z,1516735532.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:32.552Z,1516735532.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:32.950Z,1516735532.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:33.346Z,1516735533.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:33.743Z,1516735533.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:34.143Z,1516735534.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:34.545Z,1516735534.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:34.944Z,1516735534.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:35.351Z,1516735535.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:35.748Z,1516735535.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:36.153Z,1516735536.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:36.537Z,1516735536.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:36.925Z,1516735536.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:37.346Z,1516735537.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:37.758Z,1516735537.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:38.149Z,1516735538.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:38.545Z,1516735538.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:38.956Z,1516735538.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:39.355Z,1516735539.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:39.752Z,1516735539.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:40.150Z,1516735540.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:40.528Z,1516735540.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:40.957Z,1516735540.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:41.338Z,1516735541.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:41.737Z,1516735541.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:42.134Z,1516735542.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:42.545Z,1516735542.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:42.936Z,1516735542.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:43.345Z,1516735543.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:43.741Z,1516735543.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:44.141Z,1516735544.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:44.534Z,1516735544.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:44.937Z,1516735544.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:45.342Z,1516735545.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:45.749Z,1516735545.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:46.153Z,1516735546.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:46.537Z,1516735546.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:46.942Z,1516735546.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:47.348Z,1516735547.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:47.746Z,1516735547.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:48.142Z,1516735548.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:48.539Z,1516735548.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:48.943Z,1516735548.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:49.343Z,1516735549.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:49.745Z,1516735549.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:50.161Z,1516735550.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:50.533Z,1516735550.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:50.939Z,1516735550.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:51.353Z,1516735551.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:51.750Z,1516735551.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:52.142Z,1516735552.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:52.544Z,1516735552.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:52.548Z,1516735552.548 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:25:52.548Z,1516735552.548 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:25:52.548Z,1516735552.548 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:25:52.548Z,1516735552.548 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:25:52.933Z,1516735552.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:52.936Z,1516735552.936 [Default:CheckIn:D] Stopped 2018-01-23T19:25:52.937Z,1516735552.937 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:25:53.345Z,1516735553.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:53.348Z,1516735553.348 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 968.014583 min 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn:E] Stopped 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn] Stopped 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn](INFO): Running loop #95 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn] Running Loop=95 2018-01-23T19:25:53.349Z,1516735553.349 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:25:53.350Z,1516735553.350 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:25:53.748Z,1516735553.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:56.837Z,1516735556.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:56.969Z,1516735556.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:57.313Z,1516735557.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:57.709Z,1516735557.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:58.113Z,1516735558.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:58.510Z,1516735558.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:58.910Z,1516735558.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:59.313Z,1516735559.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:25:59.713Z,1516735559.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:00.104Z,1516735560.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:00.502Z,1516735560.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:00.912Z,1516735560.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:01.304Z,1516735561.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:01.713Z,1516735561.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:02.110Z,1516735562.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:02.509Z,1516735562.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:02.902Z,1516735562.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:03.303Z,1516735563.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:03.707Z,1516735563.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:04.106Z,1516735564.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:04.508Z,1516735564.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:04.916Z,1516735564.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:05.309Z,1516735565.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:05.709Z,1516735565.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:06.104Z,1516735566.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:06.502Z,1516735566.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:06.912Z,1516735566.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:07.308Z,1516735567.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:07.717Z,1516735567.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:07.719Z,1516735567.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:07.719Z,1516735567.719 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 322 2018-01-23T19:26:07.719Z,1516735567.719 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:26:07.751Z,1516735567.751 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:26:08.122Z,1516735568.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:08.147Z,1516735568.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:26:08.147Z,1516735568.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 322 2018-01-23T19:26:08.514Z,1516735568.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:08.515Z,1516735568.515 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:26:08.516Z,1516735568.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:26:08.516Z,1516735568.516 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:26:08.911Z,1516735568.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:09.311Z,1516735569.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:09.716Z,1516735569.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:10.117Z,1516735570.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:10.514Z,1516735570.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:10.928Z,1516735570.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:11.317Z,1516735571.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:11.712Z,1516735571.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:12.109Z,1516735572.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:12.513Z,1516735572.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:12.916Z,1516735572.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:13.313Z,1516735573.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:13.716Z,1516735573.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:14.122Z,1516735574.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:14.519Z,1516735574.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:14.901Z,1516735574.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:15.316Z,1516735575.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:15.718Z,1516735575.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:16.116Z,1516735576.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:16.533Z,1516735576.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:16.921Z,1516735576.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:17.323Z,1516735577.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:17.721Z,1516735577.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:18.099Z,1516735578.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:18.497Z,1516735578.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:18.908Z,1516735578.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:19.301Z,1516735579.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:19.714Z,1516735579.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:20.110Z,1516735580.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:20.507Z,1516735580.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:20.906Z,1516735580.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:21.303Z,1516735581.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:21.705Z,1516735581.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:22.103Z,1516735582.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:22.536Z,1516735582.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:22.916Z,1516735582.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:23.309Z,1516735583.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:23.702Z,1516735583.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:24.105Z,1516735584.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:24.502Z,1516735584.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:24.502Z,1516735584.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 322 2018-01-23T19:26:24.502Z,1516735584.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:26:24.504Z,1516735584.504 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:24.504Z,1516735584.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 322 2018-01-23T19:26:24.504Z,1516735584.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:26:24.518Z,1516735584.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:26:24.518Z,1516735584.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:26:24.933Z,1516735584.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:26:24.933Z,1516735584.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 322 2018-01-23T19:26:24.934Z,1516735584.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:26:24.934Z,1516735584.934 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 322 2018-01-23T19:26:25.302Z,1516735585.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:26:25.303Z,1516735585.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:26:25.303Z,1516735585.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:26:25.304Z,1516735585.304 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:26:25.304Z,1516735585.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:26:25.304Z,1516735585.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:26:25.713Z,1516735585.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:26:25.714Z,1516735585.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:26.116Z,1516735586.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:26:26.117Z,1516735586.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:26.516Z,1516735586.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:26:26.517Z,1516735586.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:26.902Z,1516735586.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:26:26.903Z,1516735586.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:27.306Z,1516735587.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:26:27.311Z,1516735587.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:27.707Z,1516735587.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:26:27.708Z,1516735587.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:28.097Z,1516735588.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:26:28.097Z,1516735588.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:28.509Z,1516735588.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:26:28.510Z,1516735588.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:28.924Z,1516735588.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:26:28.924Z,1516735588.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:29.322Z,1516735589.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:26:29.327Z,1516735589.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:29.703Z,1516735589.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:26:29.704Z,1516735589.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:30.107Z,1516735590.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:26:30.107Z,1516735590.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:30.501Z,1516735590.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:26:30.502Z,1516735590.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:30.908Z,1516735590.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:26:30.909Z,1516735590.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:31.304Z,1516735591.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:26:31.305Z,1516735591.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:31.710Z,1516735591.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:26:31.711Z,1516735591.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:32.117Z,1516735592.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:26:32.118Z,1516735592.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:32.516Z,1516735592.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:26:32.517Z,1516735592.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:32.901Z,1516735592.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:26:32.902Z,1516735592.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:33.312Z,1516735593.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:26:33.313Z,1516735593.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:33.709Z,1516735593.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:26:33.710Z,1516735593.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:34.103Z,1516735594.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:26:34.104Z,1516735594.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:34.520Z,1516735594.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:26:34.521Z,1516735594.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:34.924Z,1516735594.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:26:34.925Z,1516735594.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:35.313Z,1516735595.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:26:35.314Z,1516735595.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:35.705Z,1516735595.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:26:35.706Z,1516735595.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:36.107Z,1516735596.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:26:36.108Z,1516735596.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:36.509Z,1516735596.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:26:36.510Z,1516735596.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:36.908Z,1516735596.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:26:36.909Z,1516735596.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:37.316Z,1516735597.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:26:37.317Z,1516735597.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:37.714Z,1516735597.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:26:37.715Z,1516735597.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:38.117Z,1516735598.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:26:38.118Z,1516735598.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:38.515Z,1516735598.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:26:38.516Z,1516735598.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:38.912Z,1516735598.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:26:38.913Z,1516735598.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:39.311Z,1516735599.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:26:39.312Z,1516735599.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:39.709Z,1516735599.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:26:39.710Z,1516735599.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:40.111Z,1516735600.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:26:40.112Z,1516735600.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:40.514Z,1516735600.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:26:40.515Z,1516735600.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:40.925Z,1516735600.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:26:40.926Z,1516735600.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:41.320Z,1516735601.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:26:41.321Z,1516735601.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:41.712Z,1516735601.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:26:41.713Z,1516735601.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:42.135Z,1516735602.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:26:42.136Z,1516735602.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:42.519Z,1516735602.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:26:42.520Z,1516735602.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:42.921Z,1516735602.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:26:42.922Z,1516735602.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:43.333Z,1516735603.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:26:43.334Z,1516735603.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:43.737Z,1516735603.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:26:43.738Z,1516735603.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:44.141Z,1516735604.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:26:44.142Z,1516735604.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:44.537Z,1516735604.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:44.906Z,1516735604.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:45.317Z,1516735605.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:45.715Z,1516735605.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:46.126Z,1516735606.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:46.521Z,1516735606.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:46.918Z,1516735606.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:47.313Z,1516735607.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:47.705Z,1516735607.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:48.108Z,1516735608.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:48.529Z,1516735608.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:48.917Z,1516735608.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:49.367Z,1516735609.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:49.741Z,1516735609.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:50.174Z,1516735610.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:50.553Z,1516735610.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:50.929Z,1516735610.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:51.334Z,1516735611.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:51.733Z,1516735611.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:52.126Z,1516735612.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:52.533Z,1516735612.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:52.930Z,1516735612.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:53.335Z,1516735613.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:53.709Z,1516735613.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:26:54.149Z,1516735614.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:00.112Z,1516735620.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:00.249Z,1516735620.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:00.649Z,1516735620.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:01.050Z,1516735621.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:01.475Z,1516735621.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:01.851Z,1516735621.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:02.244Z,1516735622.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:02.649Z,1516735622.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:03.056Z,1516735623.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:03.449Z,1516735623.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:03.853Z,1516735623.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:04.227Z,1516735624.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:04.650Z,1516735624.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:05.049Z,1516735625.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:05.429Z,1516735625.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:05.830Z,1516735625.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:06.241Z,1516735626.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:06.620Z,1516735626.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:07.024Z,1516735627.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:07.428Z,1516735627.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:07.842Z,1516735627.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:08.231Z,1516735628.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:08.624Z,1516735628.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:09.029Z,1516735629.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:09.437Z,1516735629.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:09.831Z,1516735629.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:10.227Z,1516735630.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:10.625Z,1516735630.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:11.018Z,1516735631.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:11.426Z,1516735631.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:11.830Z,1516735631.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:12.241Z,1516735632.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:12.631Z,1516735632.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:13.024Z,1516735633.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:13.424Z,1516735633.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:13.829Z,1516735633.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:14.227Z,1516735634.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:14.636Z,1516735634.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:15.031Z,1516735635.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:15.435Z,1516735635.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:15.827Z,1516735635.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:16.227Z,1516735636.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:16.624Z,1516735636.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:17.032Z,1516735637.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:17.406Z,1516735637.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:17.818Z,1516735637.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:18.222Z,1516735638.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:18.625Z,1516735638.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:19.021Z,1516735639.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:19.460Z,1516735639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:19.816Z,1516735639.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:20.209Z,1516735640.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:20.626Z,1516735640.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:21.029Z,1516735641.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:21.429Z,1516735641.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:21.817Z,1516735641.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:22.212Z,1516735642.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:22.609Z,1516735642.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:23.013Z,1516735643.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:23.413Z,1516735643.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:23.843Z,1516735643.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:24.249Z,1516735644.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:24.645Z,1516735644.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:25.021Z,1516735645.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:25.417Z,1516735645.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:25.833Z,1516735645.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:26.225Z,1516735646.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:26.627Z,1516735646.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:27.038Z,1516735647.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:27.435Z,1516735647.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:27.827Z,1516735647.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:28.224Z,1516735648.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:28.605Z,1516735648.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:29.008Z,1516735649.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:29.441Z,1516735649.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:29.839Z,1516735649.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:30.249Z,1516735650.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:30.641Z,1516735650.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:31.041Z,1516735651.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:31.414Z,1516735651.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:31.817Z,1516735651.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:32.215Z,1516735652.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:32.622Z,1516735652.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:33.048Z,1516735653.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:33.422Z,1516735653.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:33.817Z,1516735653.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:34.217Z,1516735654.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:34.616Z,1516735654.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:35.021Z,1516735655.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:35.419Z,1516735655.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:35.821Z,1516735655.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:36.222Z,1516735656.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:36.622Z,1516735656.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:37.017Z,1516735657.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:37.418Z,1516735657.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:37.821Z,1516735657.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:38.217Z,1516735658.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:38.627Z,1516735658.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:39.026Z,1516735659.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:39.426Z,1516735659.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:39.819Z,1516735659.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:40.217Z,1516735660.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:40.618Z,1516735660.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:41.020Z,1516735661.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:41.417Z,1516735661.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:41.826Z,1516735661.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:42.233Z,1516735662.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:42.632Z,1516735662.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:43.017Z,1516735663.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:43.421Z,1516735663.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:43.824Z,1516735663.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:44.220Z,1516735664.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:44.638Z,1516735664.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:45.030Z,1516735665.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:45.426Z,1516735665.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:45.821Z,1516735665.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:46.224Z,1516735666.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:46.625Z,1516735666.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:47.029Z,1516735667.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:47.417Z,1516735667.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:47.827Z,1516735667.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:48.230Z,1516735668.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:48.628Z,1516735668.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:49.024Z,1516735669.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:49.429Z,1516735669.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:49.823Z,1516735669.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:50.225Z,1516735670.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:50.626Z,1516735670.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:51.037Z,1516735671.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:51.426Z,1516735671.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:51.821Z,1516735671.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:52.219Z,1516735672.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:52.625Z,1516735672.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:53.024Z,1516735673.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:53.425Z,1516735673.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:53.830Z,1516735673.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:54.232Z,1516735674.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:57.324Z,1516735677.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:57.463Z,1516735677.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:57.820Z,1516735677.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:58.196Z,1516735678.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:58.620Z,1516735678.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:59.021Z,1516735679.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:59.424Z,1516735679.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:27:59.793Z,1516735679.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:00.193Z,1516735680.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:00.592Z,1516735680.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:00.993Z,1516735680.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:01.393Z,1516735681.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:01.820Z,1516735681.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:02.222Z,1516735682.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:02.606Z,1516735682.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:02.995Z,1516735682.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:03.395Z,1516735683.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:03.805Z,1516735683.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:04.200Z,1516735684.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:04.601Z,1516735684.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:05.006Z,1516735685.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:05.409Z,1516735685.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:05.801Z,1516735685.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:06.199Z,1516735686.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:06.600Z,1516735686.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:07.001Z,1516735687.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:07.399Z,1516735687.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:07.802Z,1516735687.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:08.202Z,1516735688.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:08.602Z,1516735688.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:09.000Z,1516735689.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:09.399Z,1516735689.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:09.805Z,1516735689.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:10.200Z,1516735690.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:10.601Z,1516735690.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:11.006Z,1516735691.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:11.408Z,1516735691.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:11.801Z,1516735691.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:12.196Z,1516735692.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:12.601Z,1516735692.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:13.000Z,1516735693.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:13.405Z,1516735693.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:13.803Z,1516735693.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:14.209Z,1516735694.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:14.602Z,1516735694.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:15.001Z,1516735695.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:15.401Z,1516735695.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:15.805Z,1516735695.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:16.200Z,1516735696.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:16.602Z,1516735696.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:17.006Z,1516735697.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:17.402Z,1516735697.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:17.800Z,1516735697.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:18.200Z,1516735698.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:18.601Z,1516735698.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:18.997Z,1516735698.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:19.405Z,1516735699.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:19.802Z,1516735699.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:20.209Z,1516735700.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:20.602Z,1516735700.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:20.999Z,1516735700.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:21.392Z,1516735701.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:21.802Z,1516735701.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:22.200Z,1516735702.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:22.613Z,1516735702.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:23.010Z,1516735703.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:23.408Z,1516735703.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:23.798Z,1516735703.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:24.205Z,1516735704.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:24.601Z,1516735704.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:24.997Z,1516735704.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:25.400Z,1516735705.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:25.811Z,1516735705.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:26.209Z,1516735706.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:26.605Z,1516735706.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:26.000Z,1516735707.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:27.394Z,1516735707.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:27.809Z,1516735707.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:28.196Z,1516735708.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:28.603Z,1516735708.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:29.010Z,1516735709.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:29.410Z,1516735709.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:29.797Z,1516735709.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:30.205Z,1516735710.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:30.610Z,1516735710.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:31.013Z,1516735711.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:31.405Z,1516735711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:31.801Z,1516735711.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:32.196Z,1516735712.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:32.609Z,1516735712.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:33.009Z,1516735713.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:33.406Z,1516735713.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:33.802Z,1516735713.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:34.204Z,1516735714.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:34.605Z,1516735714.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:35.021Z,1516735715.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:35.407Z,1516735715.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:35.799Z,1516735715.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:36.202Z,1516735716.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:36.612Z,1516735716.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:37.011Z,1516735717.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:37.417Z,1516735717.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:37.805Z,1516735717.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:38.197Z,1516735718.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:38.611Z,1516735718.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:39.014Z,1516735719.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:39.406Z,1516735719.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:39.802Z,1516735719.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:40.203Z,1516735720.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:40.603Z,1516735720.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:41.021Z,1516735721.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:41.407Z,1516735721.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:41.798Z,1516735721.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:42.201Z,1516735722.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:42.615Z,1516735722.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:43.010Z,1516735723.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:43.421Z,1516735723.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:43.810Z,1516735723.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:44.207Z,1516735724.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:44.610Z,1516735724.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:45.015Z,1516735725.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:45.405Z,1516735725.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:45.806Z,1516735725.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:46.210Z,1516735726.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:46.604Z,1516735726.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:47.018Z,1516735727.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:47.412Z,1516735727.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:47.808Z,1516735727.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:48.213Z,1516735728.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:48.612Z,1516735728.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:49.011Z,1516735729.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:49.410Z,1516735729.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:49.809Z,1516735729.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:50.205Z,1516735730.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:50.609Z,1516735730.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:51.016Z,1516735731.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:51.410Z,1516735731.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:51.792Z,1516735731.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:52.188Z,1516735732.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:52.598Z,1516735732.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:53.018Z,1516735733.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:53.424Z,1516735733.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:53.794Z,1516735733.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:54.201Z,1516735734.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:54.629Z,1516735734.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:57.694Z,1516735737.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:57.833Z,1516735737.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:58.188Z,1516735738.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:58.597Z,1516735738.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:58.984Z,1516735738.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:59.384Z,1516735739.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:28:59.792Z,1516735739.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:00.194Z,1516735740.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:00.591Z,1516735740.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:00.989Z,1516735740.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:01.366Z,1516735741.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:01.768Z,1516735741.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:02.172Z,1516735742.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:02.570Z,1516735742.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:03.009Z,1516735743.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:03.404Z,1516735743.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:03.782Z,1516735743.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:04.174Z,1516735744.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:04.584Z,1516735744.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:04.975Z,1516735744.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:05.380Z,1516735745.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:05.778Z,1516735745.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:06.206Z,1516735746.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:06.582Z,1516735746.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:06.985Z,1516735746.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:07.375Z,1516735747.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:07.780Z,1516735747.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:08.177Z,1516735748.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:08.578Z,1516735748.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:08.580Z,1516735748.580 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:08.580Z,1516735748.580 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 323 2018-01-23T19:29:08.580Z,1516735748.580 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:29:08.592Z,1516735748.592 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:29:08.985Z,1516735748.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:08.998Z,1516735748.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:29:08.998Z,1516735748.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 323 2018-01-23T19:29:09.390Z,1516735749.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:09.391Z,1516735749.391 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:29:09.391Z,1516735749.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:29:09.392Z,1516735749.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:29:09.793Z,1516735749.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:10.179Z,1516735750.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:10.589Z,1516735750.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:10.982Z,1516735750.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:11.385Z,1516735751.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:11.788Z,1516735751.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:12.190Z,1516735752.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:12.588Z,1516735752.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:12.981Z,1516735752.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:13.386Z,1516735753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:13.779Z,1516735753.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:14.190Z,1516735754.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:14.585Z,1516735754.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:14.994Z,1516735754.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:15.394Z,1516735755.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:15.790Z,1516735755.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:16.184Z,1516735756.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:16.585Z,1516735756.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:16.981Z,1516735756.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:17.378Z,1516735757.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:17.786Z,1516735757.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:18.193Z,1516735758.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:18.593Z,1516735758.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:18.980Z,1516735758.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:19.385Z,1516735759.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:19.784Z,1516735759.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:20.182Z,1516735760.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:20.619Z,1516735760.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:20.990Z,1516735760.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:21.395Z,1516735761.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:21.791Z,1516735761.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:22.178Z,1516735762.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:22.581Z,1516735762.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:22.981Z,1516735762.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:23.388Z,1516735763.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:23.791Z,1516735763.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:24.190Z,1516735764.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:24.590Z,1516735764.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:24.984Z,1516735764.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:25.377Z,1516735765.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:25.377Z,1516735765.377 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 323 2018-01-23T19:29:25.377Z,1516735765.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:29:25.379Z,1516735765.379 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:25.379Z,1516735765.379 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 323 2018-01-23T19:29:25.380Z,1516735765.380 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:29:25.392Z,1516735765.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:29:25.392Z,1516735765.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:29:25.799Z,1516735765.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:29:25.799Z,1516735765.799 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 323 2018-01-23T19:29:25.799Z,1516735765.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:29:25.800Z,1516735765.800 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 323 2018-01-23T19:29:26.190Z,1516735766.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:29:26.191Z,1516735766.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:29:26.191Z,1516735766.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:29:26.191Z,1516735766.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:29:26.192Z,1516735766.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:29:26.192Z,1516735766.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:29:26.588Z,1516735766.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:29:26.589Z,1516735766.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:27.000Z,1516735767.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:29:27.001Z,1516735767.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:27.391Z,1516735767.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:29:27.392Z,1516735767.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:27.787Z,1516735767.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:29:27.788Z,1516735767.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:28.192Z,1516735768.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:29:28.193Z,1516735768.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:28.584Z,1516735768.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:29:28.585Z,1516735768.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:28.982Z,1516735768.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:29:28.983Z,1516735768.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:29.387Z,1516735769.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:29:29.388Z,1516735769.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:29.790Z,1516735769.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:29:29.791Z,1516735769.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:30.198Z,1516735770.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:29:30.199Z,1516735770.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:30.588Z,1516735770.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:29:30.589Z,1516735770.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:30.988Z,1516735770.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:29:30.989Z,1516735770.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:31.389Z,1516735771.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:29:31.390Z,1516735771.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:31.788Z,1516735771.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:29:31.789Z,1516735771.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:32.192Z,1516735772.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:29:32.193Z,1516735772.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:32.581Z,1516735772.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:29:32.582Z,1516735772.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:32.989Z,1516735772.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:29:32.990Z,1516735772.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:33.400Z,1516735773.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:29:33.401Z,1516735773.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:33.804Z,1516735773.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:29:33.805Z,1516735773.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:34.192Z,1516735774.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:29:34.193Z,1516735774.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:34.591Z,1516735774.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:29:34.592Z,1516735774.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:34.990Z,1516735774.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:29:34.995Z,1516735774.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:35.388Z,1516735775.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:29:35.389Z,1516735775.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:35.801Z,1516735775.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:29:35.802Z,1516735775.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:36.205Z,1516735776.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:29:36.206Z,1516735776.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:36.602Z,1516735776.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:29:36.607Z,1516735776.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:37.003Z,1516735777.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:29:37.004Z,1516735777.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:37.396Z,1516735777.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:29:37.397Z,1516735777.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:37.762Z,1516735777.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x46478 got:0x37141 2018-01-23T19:29:37.800Z,1516735777.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:29:37.801Z,1516735777.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:38.172Z,1516735778.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:29:38.173Z,1516735778.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:38.581Z,1516735778.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:29:38.582Z,1516735778.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:38.985Z,1516735778.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:29:38.986Z,1516735778.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:39.386Z,1516735779.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:29:39.387Z,1516735779.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:39.786Z,1516735779.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:29:39.788Z,1516735779.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:40.184Z,1516735780.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:29:40.185Z,1516735780.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:40.580Z,1516735780.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:29:40.580Z,1516735780.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:40.985Z,1516735780.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:29:40.986Z,1516735780.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:41.378Z,1516735781.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:29:41.379Z,1516735781.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:41.790Z,1516735781.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:29:41.791Z,1516735781.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:42.192Z,1516735782.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:29:42.193Z,1516735782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:42.599Z,1516735782.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:29:42.600Z,1516735782.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:42.990Z,1516735782.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:29:42.991Z,1516735782.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:43.383Z,1516735783.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:29:43.384Z,1516735783.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:43.788Z,1516735783.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:29:43.789Z,1516735783.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:44.190Z,1516735784.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:29:44.191Z,1516735784.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:44.575Z,1516735784.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:29:44.576Z,1516735784.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:44.990Z,1516735784.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:29:44.991Z,1516735784.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:45.405Z,1516735785.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:45.791Z,1516735785.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:46.182Z,1516735786.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:46.595Z,1516735786.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:47.000Z,1516735787.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:47.388Z,1516735787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:47.797Z,1516735787.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:48.193Z,1516735788.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:48.601Z,1516735788.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:49.001Z,1516735789.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:49.369Z,1516735789.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:49.798Z,1516735789.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:50.202Z,1516735790.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:50.572Z,1516735790.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:51.005Z,1516735791.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:51.405Z,1516735791.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:51.800Z,1516735791.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:52.176Z,1516735792.176 [PNI_TCM](ERROR): CRC does not match. Expected:0x36021 got:0x11545 2018-01-23T19:29:52.212Z,1516735792.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:52.575Z,1516735792.575 [PNI_TCM](ERROR): CRC does not match. Expected:0x31319 got:0x0 2018-01-23T19:29:52.604Z,1516735792.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:52.979Z,1516735792.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:53.395Z,1516735793.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:53.786Z,1516735793.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:54.209Z,1516735794.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:54.585Z,1516735794.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:55.007Z,1516735795.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:58.112Z,1516735798.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:58.224Z,1516735798.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:58.605Z,1516735798.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:58.989Z,1516735798.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:59.386Z,1516735799.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:29:59.804Z,1516735799.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:00.177Z,1516735800.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:00.586Z,1516735800.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:00.993Z,1516735800.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:01.412Z,1516735801.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:01.795Z,1516735801.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:02.180Z,1516735802.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:02.584Z,1516735802.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:02.981Z,1516735802.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:03.380Z,1516735803.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:03.790Z,1516735803.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:04.197Z,1516735804.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:04.614Z,1516735804.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:04.980Z,1516735804.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:05.379Z,1516735805.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:05.787Z,1516735805.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:06.189Z,1516735806.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:06.578Z,1516735806.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:06.997Z,1516735806.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:07.393Z,1516735807.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:07.816Z,1516735807.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:08.185Z,1516735808.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:08.581Z,1516735808.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:08.983Z,1516735808.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:09.378Z,1516735809.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:09.792Z,1516735809.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:10.198Z,1516735810.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:10.593Z,1516735810.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:10.981Z,1516735810.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:11.392Z,1516735811.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:11.789Z,1516735811.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:12.183Z,1516735812.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:12.586Z,1516735812.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:12.993Z,1516735812.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:13.392Z,1516735813.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:13.797Z,1516735813.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:14.180Z,1516735814.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:14.596Z,1516735814.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:14.987Z,1516735814.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:15.373Z,1516735815.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:15.804Z,1516735815.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:16.212Z,1516735816.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:16.610Z,1516735816.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:16.977Z,1516735816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:17.369Z,1516735817.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:17.776Z,1516735817.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:18.186Z,1516735818.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:18.576Z,1516735818.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:18.994Z,1516735818.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:19.389Z,1516735819.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:19.795Z,1516735819.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:20.184Z,1516735820.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:20.581Z,1516735820.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:20.981Z,1516735820.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:21.383Z,1516735821.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:21.791Z,1516735821.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:22.190Z,1516735822.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:22.597Z,1516735822.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:22.989Z,1516735822.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:23.374Z,1516735823.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:23.789Z,1516735823.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:24.201Z,1516735824.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:24.588Z,1516735824.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:24.996Z,1516735824.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:25.396Z,1516735825.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:25.794Z,1516735825.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:26.205Z,1516735826.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:26.597Z,1516735826.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:26.992Z,1516735826.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:27.376Z,1516735827.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:27.780Z,1516735827.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:28.181Z,1516735828.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:28.580Z,1516735828.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:28.984Z,1516735828.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:29.379Z,1516735829.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:29.785Z,1516735829.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:30.182Z,1516735830.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:30.578Z,1516735830.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:30.981Z,1516735830.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:31.378Z,1516735831.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:31.793Z,1516735831.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:32.186Z,1516735832.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:32.592Z,1516735832.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:32.979Z,1516735832.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:33.379Z,1516735833.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:33.793Z,1516735833.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:34.189Z,1516735834.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:34.587Z,1516735834.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:34.985Z,1516735834.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:35.384Z,1516735835.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:35.789Z,1516735835.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:36.200Z,1516735836.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:36.590Z,1516735836.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:36.984Z,1516735836.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:37.394Z,1516735837.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:37.793Z,1516735837.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:38.190Z,1516735838.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:38.595Z,1516735838.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:38.989Z,1516735838.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:39.392Z,1516735839.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:39.799Z,1516735839.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:40.204Z,1516735840.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:40.609Z,1516735840.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:40.981Z,1516735840.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:41.381Z,1516735841.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:41.806Z,1516735841.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:42.182Z,1516735842.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:42.579Z,1516735842.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:42.975Z,1516735842.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:43.384Z,1516735843.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:43.786Z,1516735843.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:44.185Z,1516735844.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:44.592Z,1516735844.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:44.977Z,1516735844.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:45.381Z,1516735845.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:45.791Z,1516735845.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:46.190Z,1516735846.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:46.596Z,1516735846.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:46.977Z,1516735846.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:47.370Z,1516735847.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:47.797Z,1516735847.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:48.205Z,1516735848.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:48.609Z,1516735848.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:49.001Z,1516735849.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:49.381Z,1516735849.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:49.780Z,1516735849.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:50.182Z,1516735850.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:50.584Z,1516735850.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:50.980Z,1516735850.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:51.385Z,1516735851.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:51.780Z,1516735851.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:52.184Z,1516735852.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:52.580Z,1516735852.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:52.978Z,1516735852.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:53.376Z,1516735853.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:53.380Z,1516735853.380 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:25:53.3Z 2018-01-23T19:30:53.380Z,1516735853.380 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T19:30:53.380Z,1516735853.380 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T19:30:53.785Z,1516735853.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:54.325Z,1516735854.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:54.613Z,1516735854.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:57.677Z,1516735857.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:57.751Z,1516735857.751 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0380.lzma 2018-01-23T19:30:57.818Z,1516735857.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:58.167Z,1516735858.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:58.511Z,1516735858.511 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0380.lzma.bak 2018-01-23T19:30:58.514Z,1516735858.514 [DataOverHttps](INFO): SBD MOMSN=7756521 2018-01-23T19:30:58.586Z,1516735858.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:59.221Z,1516735859.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:30:59.372Z,1516735859.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:02.441Z,1516735862.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:02.565Z,1516735862.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:02.964Z,1516735862.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:03.365Z,1516735863.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:03.762Z,1516735863.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:04.145Z,1516735864.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:07.269Z,1516735867.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:07.330Z,1516735867.330 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0381.lzma 2018-01-23T19:31:07.393Z,1516735867.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:07.768Z,1516735867.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:08.094Z,1516735868.094 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0381.lzma.bak 2018-01-23T19:31:08.094Z,1516735868.094 [DataOverHttps](INFO): SBD MOMSN=7756523 2018-01-23T19:31:08.159Z,1516735868.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:08.798Z,1516735868.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:08.817Z,1516735868.817 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:31:08.817Z,1516735868.817 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:31:08.817Z,1516735868.817 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:31:08.964Z,1516735868.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:12.069Z,1516735872.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:12.201Z,1516735872.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:12.542Z,1516735872.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:12.970Z,1516735872.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:13.345Z,1516735873.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:13.738Z,1516735873.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:14.136Z,1516735874.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:14.534Z,1516735874.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:14.945Z,1516735874.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:15.345Z,1516735875.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:15.742Z,1516735875.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:16.135Z,1516735876.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:16.536Z,1516735876.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:16.934Z,1516735876.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:17.337Z,1516735877.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:17.736Z,1516735877.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:18.145Z,1516735878.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:18.546Z,1516735878.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:18.941Z,1516735878.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:19.334Z,1516735879.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:19.735Z,1516735879.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:20.136Z,1516735880.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:20.534Z,1516735880.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:20.945Z,1516735880.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:21.345Z,1516735881.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:21.742Z,1516735881.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:22.141Z,1516735882.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:22.540Z,1516735882.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:22.937Z,1516735882.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:23.339Z,1516735883.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:23.741Z,1516735883.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:24.152Z,1516735884.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:24.550Z,1516735884.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:24.950Z,1516735884.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:25.341Z,1516735885.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:25.748Z,1516735885.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:26.142Z,1516735886.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:26.545Z,1516735886.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:26.955Z,1516735886.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:27.353Z,1516735887.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:27.751Z,1516735887.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:28.145Z,1516735888.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:28.552Z,1516735888.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:28.926Z,1516735888.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:29.328Z,1516735889.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:29.727Z,1516735889.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:30.167Z,1516735890.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:30.566Z,1516735890.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:30.975Z,1516735890.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:31.333Z,1516735891.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:31.736Z,1516735891.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:32.135Z,1516735892.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:32.533Z,1516735892.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:32.938Z,1516735892.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:33.342Z,1516735893.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:33.738Z,1516735893.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:34.134Z,1516735894.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:34.534Z,1516735894.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:34.933Z,1516735894.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:35.336Z,1516735895.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:35.740Z,1516735895.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:36.171Z,1516735896.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:36.618Z,1516735896.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:36.949Z,1516735896.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:37.333Z,1516735897.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:37.739Z,1516735897.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:38.137Z,1516735898.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:38.542Z,1516735898.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:38.945Z,1516735898.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:39.341Z,1516735899.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:39.757Z,1516735899.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:40.142Z,1516735900.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:40.553Z,1516735900.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:40.944Z,1516735900.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:41.344Z,1516735901.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:41.742Z,1516735901.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:42.149Z,1516735902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:42.599Z,1516735902.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:43.004Z,1516735903.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:43.348Z,1516735903.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:43.751Z,1516735903.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:44.170Z,1516735904.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:44.558Z,1516735904.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:44.982Z,1516735904.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:45.369Z,1516735905.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:45.782Z,1516735905.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:46.136Z,1516735906.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:46.571Z,1516735906.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:46.978Z,1516735906.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:47.375Z,1516735907.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:47.776Z,1516735907.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:48.157Z,1516735908.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:48.608Z,1516735908.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:49.013Z,1516735909.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:49.361Z,1516735909.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:49.767Z,1516735909.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:50.174Z,1516735910.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:50.549Z,1516735910.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:50.981Z,1516735910.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:51.381Z,1516735911.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:51.758Z,1516735911.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:52.154Z,1516735912.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:52.587Z,1516735912.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:52.952Z,1516735912.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:53.359Z,1516735913.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:53.763Z,1516735913.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:54.177Z,1516735914.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:54.569Z,1516735914.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:54.973Z,1516735914.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:55.345Z,1516735915.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:55.785Z,1516735915.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:56.180Z,1516735916.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:56.551Z,1516735916.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:56.985Z,1516735916.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:57.390Z,1516735917.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:57.757Z,1516735917.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:58.167Z,1516735918.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:58.560Z,1516735918.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:58.957Z,1516735918.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:59.367Z,1516735919.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:31:59.766Z,1516735919.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:00.165Z,1516735920.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:00.573Z,1516735920.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:00.985Z,1516735920.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:01.346Z,1516735921.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:01.759Z,1516735921.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:02.155Z,1516735922.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:02.544Z,1516735922.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:02.957Z,1516735922.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:03.367Z,1516735923.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:03.753Z,1516735923.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:04.145Z,1516735924.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:04.549Z,1516735924.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:04.929Z,1516735924.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:05.338Z,1516735925.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:05.733Z,1516735925.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:06.144Z,1516735926.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:06.549Z,1516735926.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:06.943Z,1516735926.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:07.337Z,1516735927.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:07.739Z,1516735927.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:08.141Z,1516735928.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:08.536Z,1516735928.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:08.945Z,1516735928.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:09.346Z,1516735929.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:12.449Z,1516735932.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:12.451Z,1516735932.451 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:12.451Z,1516735932.451 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 324 2018-01-23T19:32:12.451Z,1516735932.451 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:32:12.491Z,1516735932.491 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:32:12.586Z,1516735932.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:12.600Z,1516735932.600 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:32:12.600Z,1516735932.600 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 324 2018-01-23T19:32:12.952Z,1516735932.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:12.953Z,1516735932.953 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:32:12.953Z,1516735932.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:32:12.954Z,1516735932.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:32:13.349Z,1516735933.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:13.749Z,1516735933.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:14.154Z,1516735934.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:14.557Z,1516735934.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:14.954Z,1516735934.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:15.343Z,1516735935.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:15.748Z,1516735935.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:16.143Z,1516735936.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:16.549Z,1516735936.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:16.959Z,1516735936.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:17.357Z,1516735937.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:17.760Z,1516735937.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:18.150Z,1516735938.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:18.544Z,1516735938.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:18.964Z,1516735938.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:19.357Z,1516735939.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:19.754Z,1516735939.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:20.153Z,1516735940.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:20.549Z,1516735940.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:20.965Z,1516735940.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:21.364Z,1516735941.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:21.765Z,1516735941.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:22.148Z,1516735942.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:22.553Z,1516735942.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:22.965Z,1516735942.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:23.369Z,1516735943.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:23.765Z,1516735943.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:24.138Z,1516735944.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:24.539Z,1516735944.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:24.950Z,1516735944.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:25.350Z,1516735945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:25.750Z,1516735945.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:26.137Z,1516735946.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:26.545Z,1516735946.545 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:26.545Z,1516735946.545 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 324 2018-01-23T19:32:26.545Z,1516735946.545 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:32:26.547Z,1516735946.547 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:26.548Z,1516735946.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 324 2018-01-23T19:32:26.548Z,1516735946.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:32:26.560Z,1516735946.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:32:26.560Z,1516735946.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:32:26.962Z,1516735946.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:32:26.962Z,1516735946.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 324 2018-01-23T19:32:26.962Z,1516735946.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:32:26.962Z,1516735946.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 324 2018-01-23T19:32:27.367Z,1516735947.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:32:27.367Z,1516735947.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:32:27.368Z,1516735947.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:32:27.368Z,1516735947.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:32:27.368Z,1516735947.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:32:27.369Z,1516735947.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:32:27.760Z,1516735947.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:32:27.761Z,1516735947.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:28.148Z,1516735948.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:32:28.148Z,1516735948.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:28.549Z,1516735948.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:32:28.550Z,1516735948.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:28.951Z,1516735948.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:32:28.952Z,1516735948.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:29.350Z,1516735949.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:32:29.351Z,1516735949.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:29.752Z,1516735949.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:32:29.753Z,1516735949.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:30.153Z,1516735950.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:32:30.154Z,1516735950.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:30.542Z,1516735950.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:32:30.543Z,1516735950.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:30.953Z,1516735950.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:32:30.953Z,1516735950.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:31.355Z,1516735951.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:32:31.356Z,1516735951.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:31.753Z,1516735951.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:32:31.753Z,1516735951.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:32.144Z,1516735952.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:32:32.145Z,1516735952.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:32.546Z,1516735952.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:32:32.548Z,1516735952.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:32.953Z,1516735952.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:32:32.954Z,1516735952.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:33.360Z,1516735953.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:32:33.361Z,1516735953.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:33.760Z,1516735953.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:32:33.761Z,1516735953.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:34.148Z,1516735954.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:32:34.149Z,1516735954.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:34.548Z,1516735954.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:32:34.549Z,1516735954.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:34.954Z,1516735954.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:32:34.956Z,1516735954.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:35.364Z,1516735955.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:32:35.365Z,1516735955.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:35.763Z,1516735955.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:32:35.764Z,1516735955.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:36.153Z,1516735956.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:32:36.154Z,1516735956.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:36.551Z,1516735956.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:32:36.552Z,1516735956.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:36.964Z,1516735956.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:32:36.965Z,1516735956.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:37.364Z,1516735957.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:32:37.365Z,1516735957.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:37.754Z,1516735957.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:32:37.755Z,1516735957.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:38.161Z,1516735958.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:32:38.163Z,1516735958.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:38.546Z,1516735958.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:32:38.548Z,1516735958.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:38.953Z,1516735958.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:32:38.954Z,1516735958.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:39.364Z,1516735959.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:32:39.365Z,1516735959.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:39.764Z,1516735959.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:32:39.765Z,1516735959.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:40.152Z,1516735960.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:32:40.153Z,1516735960.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:40.552Z,1516735960.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:32:40.552Z,1516735960.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:40.964Z,1516735960.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:32:40.965Z,1516735960.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:41.358Z,1516735961.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:32:41.359Z,1516735961.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:41.760Z,1516735961.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:32:41.761Z,1516735961.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:42.153Z,1516735962.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:32:42.154Z,1516735962.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:42.542Z,1516735962.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:32:42.555Z,1516735962.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:42.956Z,1516735962.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:32:42.957Z,1516735962.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:43.370Z,1516735963.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:32:43.371Z,1516735963.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:43.761Z,1516735963.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:32:43.762Z,1516735963.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:44.164Z,1516735964.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:32:44.165Z,1516735964.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:44.533Z,1516735964.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:32:44.534Z,1516735964.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:44.958Z,1516735964.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:32:44.959Z,1516735964.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:45.371Z,1516735965.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:32:45.372Z,1516735965.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:45.770Z,1516735965.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:32:45.771Z,1516735965.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:46.137Z,1516735966.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:32:46.138Z,1516735966.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:46.536Z,1516735966.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:32:46.537Z,1516735966.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:46.969Z,1516735966.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:47.371Z,1516735967.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:47.776Z,1516735967.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:48.145Z,1516735968.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:48.542Z,1516735968.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:48.957Z,1516735968.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:49.364Z,1516735969.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:49.757Z,1516735969.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:50.153Z,1516735970.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:50.548Z,1516735970.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:50.954Z,1516735970.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:51.364Z,1516735971.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:51.765Z,1516735971.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:52.157Z,1516735972.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:52.550Z,1516735972.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:52.946Z,1516735972.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:53.355Z,1516735973.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:53.764Z,1516735973.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:54.155Z,1516735974.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:54.551Z,1516735974.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:54.956Z,1516735974.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:55.352Z,1516735975.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:55.751Z,1516735975.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:56.159Z,1516735976.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:56.559Z,1516735976.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:56.955Z,1516735976.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:57.353Z,1516735977.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:57.752Z,1516735977.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:58.153Z,1516735978.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:58.557Z,1516735978.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:58.934Z,1516735978.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:59.358Z,1516735979.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:32:59.772Z,1516735979.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:00.163Z,1516735980.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:00.535Z,1516735980.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:00.968Z,1516735980.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:01.341Z,1516735981.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:01.744Z,1516735981.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:02.171Z,1516735982.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:02.571Z,1516735982.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:02.968Z,1516735982.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:03.373Z,1516735983.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:03.741Z,1516735983.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:04.149Z,1516735984.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:04.544Z,1516735984.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:04.945Z,1516735984.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:05.357Z,1516735985.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:05.760Z,1516735985.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:06.151Z,1516735986.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:06.543Z,1516735986.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:06.949Z,1516735986.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:07.354Z,1516735987.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:07.742Z,1516735987.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:08.153Z,1516735988.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:08.553Z,1516735988.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:08.979Z,1516735988.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:09.353Z,1516735989.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:12.438Z,1516735992.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:12.556Z,1516735992.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:12.908Z,1516735992.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:13.317Z,1516735993.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:13.741Z,1516735993.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:14.110Z,1516735994.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:14.507Z,1516735994.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:14.907Z,1516735994.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:15.317Z,1516735995.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:15.725Z,1516735995.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:16.116Z,1516735996.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:16.506Z,1516735996.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:16.917Z,1516735996.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:17.303Z,1516735997.303 [PNI_TCM](ERROR): CRC does not match. Expected:0x22299 got:0x7106 2018-01-23T19:33:17.340Z,1516735997.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:17.715Z,1516735997.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:18.116Z,1516735998.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:18.517Z,1516735998.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:18.917Z,1516735998.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:19.319Z,1516735999.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:19.715Z,1516735999.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:20.143Z,1516736000.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:20.507Z,1516736000.507 [PNI_TCM](ERROR): CRC does not match. Expected:0x12764 got:0x27991 2018-01-23T19:33:20.525Z,1516736000.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:20.914Z,1516736000.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:21.319Z,1516736001.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:21.722Z,1516736001.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:22.118Z,1516736002.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:22.510Z,1516736002.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:22.922Z,1516736002.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:23.324Z,1516736003.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:23.711Z,1516736003.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:24.118Z,1516736004.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:24.525Z,1516736004.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:24.942Z,1516736004.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:25.321Z,1516736005.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:25.698Z,1516736005.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x26044 got:0x18457 2018-01-23T19:33:25.724Z,1516736005.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:26.110Z,1516736006.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:26.515Z,1516736006.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:26.908Z,1516736006.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:27.317Z,1516736007.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:27.726Z,1516736007.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:28.149Z,1516736008.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:28.513Z,1516736008.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:28.920Z,1516736008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:29.314Z,1516736009.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:29.727Z,1516736009.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:30.123Z,1516736010.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:30.519Z,1516736010.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:30.918Z,1516736010.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:31.317Z,1516736011.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:31.717Z,1516736011.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:32.113Z,1516736012.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:32.518Z,1516736012.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:32.917Z,1516736012.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:33.327Z,1516736013.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:33.733Z,1516736013.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:34.128Z,1516736014.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:34.527Z,1516736014.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:34.899Z,1516736014.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:35.301Z,1516736015.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:35.708Z,1516736015.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:36.110Z,1516736016.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:36.506Z,1516736016.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:36.936Z,1516736016.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:37.313Z,1516736017.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:37.703Z,1516736017.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:38.113Z,1516736018.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:38.505Z,1516736018.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:38.905Z,1516736018.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:39.313Z,1516736019.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:39.709Z,1516736019.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:40.115Z,1516736020.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:40.504Z,1516736020.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:40.903Z,1516736020.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:41.305Z,1516736021.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:41.705Z,1516736021.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:42.117Z,1516736022.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:42.517Z,1516736022.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:42.923Z,1516736022.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:43.319Z,1516736023.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:43.719Z,1516736023.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:44.115Z,1516736024.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:44.517Z,1516736024.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:44.893Z,1516736024.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:45.322Z,1516736025.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:45.730Z,1516736025.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:46.116Z,1516736026.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:46.522Z,1516736026.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:46.895Z,1516736026.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:47.300Z,1516736027.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:47.729Z,1516736027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:48.139Z,1516736028.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:48.506Z,1516736028.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:48.906Z,1516736028.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:49.308Z,1516736029.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:49.704Z,1516736029.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:50.105Z,1516736030.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:50.504Z,1516736030.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:50.902Z,1516736030.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:51.321Z,1516736031.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:51.717Z,1516736031.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:52.117Z,1516736032.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:52.505Z,1516736032.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:52.912Z,1516736032.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:53.305Z,1516736033.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:53.706Z,1516736033.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:54.114Z,1516736034.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:54.513Z,1516736034.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:54.913Z,1516736034.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:55.305Z,1516736035.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:55.706Z,1516736035.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:56.106Z,1516736036.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:56.513Z,1516736036.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:56.913Z,1516736036.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:57.318Z,1516736037.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:57.719Z,1516736037.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:58.117Z,1516736038.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:58.506Z,1516736038.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:58.916Z,1516736038.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:59.309Z,1516736039.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:33:59.713Z,1516736039.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:00.119Z,1516736040.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:00.531Z,1516736040.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:00.921Z,1516736040.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:01.319Z,1516736041.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:01.712Z,1516736041.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:02.118Z,1516736042.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:02.520Z,1516736042.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:02.915Z,1516736042.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:03.312Z,1516736043.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:03.718Z,1516736043.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:04.119Z,1516736044.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:04.537Z,1516736044.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:04.920Z,1516736044.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:05.312Z,1516736045.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:05.701Z,1516736045.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:06.128Z,1516736046.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:06.510Z,1516736046.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:06.910Z,1516736046.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:07.308Z,1516736047.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:07.709Z,1516736047.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:08.113Z,1516736048.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:08.508Z,1516736048.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:08.913Z,1516736048.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:09.309Z,1516736049.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:09.705Z,1516736049.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:12.815Z,1516736052.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:12.992Z,1516736052.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:13.317Z,1516736053.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:13.705Z,1516736053.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:14.105Z,1516736054.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:14.502Z,1516736054.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:14.902Z,1516736054.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:15.317Z,1516736055.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:15.714Z,1516736055.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:16.111Z,1516736056.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:16.502Z,1516736056.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:16.909Z,1516736056.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:17.305Z,1516736057.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:17.703Z,1516736057.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:18.109Z,1516736058.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:18.513Z,1516736058.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:18.909Z,1516736058.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:19.301Z,1516736059.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:19.700Z,1516736059.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:20.109Z,1516736060.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:20.517Z,1516736060.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:20.910Z,1516736060.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:21.301Z,1516736061.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:21.701Z,1516736061.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:22.110Z,1516736062.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:22.509Z,1516736062.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:22.917Z,1516736062.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:23.302Z,1516736063.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:23.705Z,1516736063.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:24.113Z,1516736064.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:24.517Z,1516736064.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:24.922Z,1516736064.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:25.307Z,1516736065.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:25.711Z,1516736065.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:26.114Z,1516736066.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:26.513Z,1516736066.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:26.908Z,1516736066.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:27.307Z,1516736067.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:27.708Z,1516736067.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:28.115Z,1516736068.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:28.512Z,1516736068.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:28.923Z,1516736068.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:29.321Z,1516736069.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:29.690Z,1516736069.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:30.097Z,1516736070.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:30.496Z,1516736070.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:30.897Z,1516736070.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:31.326Z,1516736071.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:31.709Z,1516736071.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:32.102Z,1516736072.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:32.498Z,1516736072.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:32.904Z,1516736072.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:33.301Z,1516736073.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:33.701Z,1516736073.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:34.104Z,1516736074.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:34.519Z,1516736074.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:34.913Z,1516736074.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:35.314Z,1516736075.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:35.704Z,1516736075.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:36.112Z,1516736076.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:36.506Z,1516736076.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:36.909Z,1516736076.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:37.319Z,1516736077.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:37.340Z,1516736077.340 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:34:37.714Z,1516736077.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:38.116Z,1516736078.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:38.513Z,1516736078.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:38.914Z,1516736078.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:39.313Z,1516736079.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:39.708Z,1516736079.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:40.105Z,1516736080.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:40.457Z,1516736080.457 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:34:40.458Z,1516736080.458 [NAL9602] Data Fault, FailCount= 4 2018-01-23T19:34:40.458Z,1516736080.458 [NAL9602](ERROR): Data Fault 2018-01-23T19:34:40.506Z,1516736080.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:40.535Z,1516736080.535 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:34:40.860Z,1516736080.860 [NAL9602](INFO): Powering down 2018-01-23T19:34:40.909Z,1516736080.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:41.312Z,1516736081.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:41.692Z,1516736081.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:41.726Z,1516736081.726 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:34:41.726Z,1516736081.726 [NAL9602] No Fault, FailCount= 4 2018-01-23T19:34:42.097Z,1516736082.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:42.498Z,1516736082.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:42.888Z,1516736082.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:43.300Z,1516736083.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:43.695Z,1516736083.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:44.099Z,1516736084.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:44.503Z,1516736084.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:44.904Z,1516736084.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:45.299Z,1516736085.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:45.698Z,1516736085.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:46.097Z,1516736086.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:46.496Z,1516736086.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:46.897Z,1516736086.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:47.299Z,1516736087.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:47.700Z,1516736087.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:48.104Z,1516736088.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:48.498Z,1516736088.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:48.896Z,1516736088.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:49.297Z,1516736089.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:49.698Z,1516736089.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:50.098Z,1516736090.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:50.497Z,1516736090.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:50.904Z,1516736090.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:51.300Z,1516736091.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:51.698Z,1516736091.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:52.092Z,1516736092.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:52.489Z,1516736092.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:52.892Z,1516736092.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:53.332Z,1516736093.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:53.704Z,1516736093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:54.103Z,1516736094.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:54.499Z,1516736094.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:54.899Z,1516736094.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:55.298Z,1516736095.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:55.703Z,1516736095.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:56.103Z,1516736096.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:56.498Z,1516736096.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:56.902Z,1516736096.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:57.296Z,1516736097.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:57.698Z,1516736097.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:58.102Z,1516736098.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:58.496Z,1516736098.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:58.898Z,1516736098.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:59.304Z,1516736099.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:34:59.699Z,1516736099.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:00.098Z,1516736100.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:00.503Z,1516736100.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:00.896Z,1516736100.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:01.305Z,1516736101.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:01.703Z,1516736101.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:02.098Z,1516736102.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:02.504Z,1516736102.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:02.903Z,1516736102.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:03.296Z,1516736103.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:03.698Z,1516736103.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:04.103Z,1516736104.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:04.498Z,1516736104.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:04.898Z,1516736104.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:05.298Z,1516736105.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:05.698Z,1516736105.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:06.100Z,1516736106.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:06.499Z,1516736106.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:06.898Z,1516736106.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:07.298Z,1516736107.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:07.699Z,1516736107.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:08.098Z,1516736108.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:08.498Z,1516736108.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:08.903Z,1516736108.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:09.298Z,1516736109.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:09.704Z,1516736109.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:10.104Z,1516736110.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:13.155Z,1516736113.155 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:35:13.197Z,1516736113.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:13.199Z,1516736113.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:13.200Z,1516736113.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 325 2018-01-23T19:35:13.200Z,1516736113.200 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:35:13.211Z,1516736113.211 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:35:13.345Z,1516736113.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:13.358Z,1516736113.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:35:13.358Z,1516736113.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 325 2018-01-23T19:35:13.665Z,1516736113.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:13.666Z,1516736113.666 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:35:13.666Z,1516736113.666 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:35:13.667Z,1516736113.667 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:35:14.065Z,1516736114.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:14.467Z,1516736114.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:14.868Z,1516736114.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:15.267Z,1516736115.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:15.661Z,1516736115.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:16.069Z,1516736116.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:16.465Z,1516736116.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:16.861Z,1516736116.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:17.263Z,1516736117.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:17.669Z,1516736117.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:18.066Z,1516736118.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:18.468Z,1516736118.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:18.862Z,1516736118.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:19.262Z,1516736119.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:19.668Z,1516736119.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:20.063Z,1516736120.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:20.460Z,1516736120.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:20.862Z,1516736120.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:21.262Z,1516736121.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:21.665Z,1516736121.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:22.072Z,1516736122.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:22.466Z,1516736122.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:22.860Z,1516736122.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:23.271Z,1516736123.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:23.678Z,1516736123.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:24.028Z,1516736124.028 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:35:24.073Z,1516736124.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:24.467Z,1516736124.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:24.878Z,1516736124.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:25.281Z,1516736125.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:25.684Z,1516736125.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:26.077Z,1516736126.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:26.454Z,1516736126.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:26.882Z,1516736126.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:27.290Z,1516736127.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:27.684Z,1516736127.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:27.684Z,1516736127.684 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 325 2018-01-23T19:35:27.684Z,1516736127.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:35:27.686Z,1516736127.686 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:27.686Z,1516736127.686 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 325 2018-01-23T19:35:27.686Z,1516736127.686 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:35:27.699Z,1516736127.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:35:27.699Z,1516736127.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:35:28.092Z,1516736128.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:35:28.092Z,1516736128.092 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 325 2018-01-23T19:35:28.093Z,1516736128.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:35:28.093Z,1516736128.093 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 325 2018-01-23T19:35:28.462Z,1516736128.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:35:28.463Z,1516736128.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:35:28.463Z,1516736128.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:35:28.464Z,1516736128.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:35:28.464Z,1516736128.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:35:28.464Z,1516736128.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:35:28.889Z,1516736128.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:35:28.890Z,1516736128.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:29.286Z,1516736129.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:35:29.287Z,1516736129.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:29.696Z,1516736129.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:35:29.697Z,1516736129.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:30.064Z,1516736130.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:35:30.065Z,1516736130.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:30.463Z,1516736130.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:35:30.464Z,1516736130.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:30.870Z,1516736130.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:35:30.871Z,1516736130.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:31.295Z,1516736131.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:35:31.296Z,1516736131.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:31.666Z,1516736131.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:35:31.667Z,1516736131.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:32.068Z,1516736132.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:35:32.069Z,1516736132.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:32.464Z,1516736132.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:35:32.465Z,1516736132.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:32.866Z,1516736132.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:35:32.867Z,1516736132.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:33.269Z,1516736133.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:35:33.270Z,1516736133.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:33.672Z,1516736133.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:35:33.673Z,1516736133.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:34.072Z,1516736134.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:35:34.073Z,1516736134.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:34.468Z,1516736134.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:35:34.469Z,1516736134.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:34.872Z,1516736134.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:35:34.873Z,1516736134.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:35.269Z,1516736135.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:35:35.270Z,1516736135.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:35.670Z,1516736135.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:35:35.671Z,1516736135.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:36.064Z,1516736136.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:35:36.065Z,1516736136.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:36.462Z,1516736136.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:35:36.463Z,1516736136.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:36.869Z,1516736136.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:35:36.870Z,1516736136.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:37.269Z,1516736137.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:35:37.270Z,1516736137.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:37.672Z,1516736137.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:35:37.673Z,1516736137.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:38.068Z,1516736138.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:35:38.069Z,1516736138.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:38.464Z,1516736138.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:35:38.464Z,1516736138.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:38.881Z,1516736138.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:35:38.882Z,1516736138.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:39.274Z,1516736139.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:35:39.275Z,1516736139.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:39.675Z,1516736139.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:35:39.676Z,1516736139.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:40.065Z,1516736140.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:35:40.066Z,1516736140.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:40.475Z,1516736140.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:35:40.476Z,1516736140.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:40.878Z,1516736140.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:35:40.883Z,1516736140.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:41.288Z,1516736141.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:35:41.289Z,1516736141.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:41.675Z,1516736141.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:35:41.676Z,1516736141.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:42.070Z,1516736142.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:35:42.071Z,1516736142.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:42.471Z,1516736142.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:35:42.472Z,1516736142.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:42.887Z,1516736142.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:35:42.888Z,1516736142.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:43.279Z,1516736143.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:35:43.280Z,1516736143.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:43.684Z,1516736143.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:35:43.685Z,1516736143.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:44.073Z,1516736144.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:35:44.074Z,1516736144.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:44.471Z,1516736144.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:35:44.472Z,1516736144.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:44.884Z,1516736144.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:35:44.885Z,1516736144.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:45.282Z,1516736145.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:35:45.283Z,1516736145.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:45.675Z,1516736145.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:35:45.676Z,1516736145.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:46.071Z,1516736146.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:35:46.072Z,1516736146.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:46.477Z,1516736146.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:35:46.478Z,1516736146.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:46.877Z,1516736146.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:35:46.878Z,1516736146.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:47.280Z,1516736147.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:35:47.281Z,1516736147.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:47.681Z,1516736147.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:35:47.682Z,1516736147.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:48.071Z,1516736148.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:48.475Z,1516736148.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:48.885Z,1516736148.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:49.287Z,1516736149.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:49.685Z,1516736149.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:50.082Z,1516736150.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:50.456Z,1516736150.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:50.878Z,1516736150.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:51.297Z,1516736151.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:51.689Z,1516736151.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:52.069Z,1516736152.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:52.465Z,1516736152.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:52.871Z,1516736152.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:53.294Z,1516736153.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:53.668Z,1516736153.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:54.069Z,1516736154.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:54.468Z,1516736154.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:54.867Z,1516736154.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:55.271Z,1516736155.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:55.695Z,1516736155.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:56.065Z,1516736156.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:56.464Z,1516736156.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:56.866Z,1516736156.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:57.280Z,1516736157.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:57.678Z,1516736157.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:58.081Z,1516736158.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:58.468Z,1516736158.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:58.867Z,1516736158.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:59.266Z,1516736159.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:35:59.676Z,1516736159.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:00.074Z,1516736160.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:00.481Z,1516736160.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:00.880Z,1516736160.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:01.273Z,1516736161.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:01.668Z,1516736161.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:02.068Z,1516736162.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:02.473Z,1516736162.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:02.873Z,1516736162.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:03.279Z,1516736163.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:03.685Z,1516736163.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:04.081Z,1516736164.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:04.468Z,1516736164.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:04.866Z,1516736164.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:05.271Z,1516736165.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:05.669Z,1516736165.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:06.075Z,1516736166.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:06.479Z,1516736166.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:06.878Z,1516736166.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:07.273Z,1516736167.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:07.672Z,1516736167.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:08.076Z,1516736168.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:08.472Z,1516736168.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:08.872Z,1516736168.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:09.275Z,1516736169.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:09.278Z,1516736169.278 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:36:09.278Z,1516736169.278 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:36:09.278Z,1516736169.278 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:36:09.278Z,1516736169.278 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:36:09.679Z,1516736169.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:09.682Z,1516736169.682 [Default:CheckIn:D] Stopped 2018-01-23T19:36:09.682Z,1516736169.682 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:36:10.076Z,1516736170.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 978.293685 min 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn:E] Stopped 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn] Stopped 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn](INFO): Running loop #96 2018-01-23T19:36:10.080Z,1516736170.080 [Default:CheckIn] Running Loop=96 2018-01-23T19:36:10.081Z,1516736170.081 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:36:10.081Z,1516736170.081 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:36:10.477Z,1516736170.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:13.637Z,1516736173.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:13.776Z,1516736173.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:14.130Z,1516736174.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:14.539Z,1516736174.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:14.932Z,1516736174.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:15.325Z,1516736175.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:15.723Z,1516736175.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:16.121Z,1516736176.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:16.527Z,1516736176.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:16.938Z,1516736176.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:17.334Z,1516736177.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:17.730Z,1516736177.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:18.124Z,1516736178.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:18.527Z,1516736178.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:18.940Z,1516736178.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:19.349Z,1516736179.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:19.733Z,1516736179.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:20.128Z,1516736180.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:20.529Z,1516736180.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:20.930Z,1516736180.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:21.341Z,1516736181.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:21.743Z,1516736181.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:22.120Z,1516736182.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:22.521Z,1516736182.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:22.926Z,1516736182.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:23.326Z,1516736183.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:23.722Z,1516736183.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:24.132Z,1516736184.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:24.517Z,1516736184.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:24.922Z,1516736184.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:25.326Z,1516736185.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:25.722Z,1516736185.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:26.118Z,1516736186.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:26.521Z,1516736186.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:26.933Z,1516736186.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:27.330Z,1516736187.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:27.730Z,1516736187.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:28.121Z,1516736188.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:28.521Z,1516736188.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:28.937Z,1516736188.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:29.337Z,1516736189.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:29.737Z,1516736189.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:30.130Z,1516736190.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:30.520Z,1516736190.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:30.929Z,1516736190.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:31.334Z,1516736191.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:31.729Z,1516736191.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:32.123Z,1516736192.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:32.533Z,1516736192.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:32.930Z,1516736192.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:33.341Z,1516736193.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:33.741Z,1516736193.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:34.133Z,1516736194.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:34.527Z,1516736194.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:34.932Z,1516736194.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:35.339Z,1516736195.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:35.743Z,1516736195.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:36.140Z,1516736196.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:36.528Z,1516736196.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:36.933Z,1516736196.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:37.334Z,1516736197.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:37.713Z,1516736197.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:38.153Z,1516736198.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:38.548Z,1516736198.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:38.946Z,1516736198.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:39.321Z,1516736199.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:39.730Z,1516736199.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:40.120Z,1516736200.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:40.518Z,1516736200.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:40.924Z,1516736200.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:41.334Z,1516736201.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:41.730Z,1516736201.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:42.137Z,1516736202.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:42.522Z,1516736202.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:42.918Z,1516736202.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:43.370Z,1516736203.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:43.725Z,1516736203.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:44.146Z,1516736204.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:44.549Z,1516736204.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:44.956Z,1516736204.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:45.352Z,1516736205.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:45.764Z,1516736205.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:46.154Z,1516736206.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:46.565Z,1516736206.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:46.924Z,1516736206.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:47.329Z,1516736207.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:47.740Z,1516736207.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:48.183Z,1516736208.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:48.541Z,1516736208.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:48.953Z,1516736208.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:49.355Z,1516736209.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:49.757Z,1516736209.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:50.177Z,1516736210.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:50.603Z,1516736210.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:50.957Z,1516736210.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:51.360Z,1516736211.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:51.785Z,1516736211.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:52.133Z,1516736212.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:52.545Z,1516736212.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:52.971Z,1516736212.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:53.337Z,1516736213.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:53.754Z,1516736213.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:54.145Z,1516736214.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:54.517Z,1516736214.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:54.955Z,1516736214.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:55.365Z,1516736215.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:55.729Z,1516736215.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:56.157Z,1516736216.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:56.560Z,1516736216.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:56.937Z,1516736216.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:57.333Z,1516736217.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:57.775Z,1516736217.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:58.137Z,1516736218.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:58.571Z,1516736218.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:58.948Z,1516736218.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:59.345Z,1516736219.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:36:59.781Z,1516736219.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:00.153Z,1516736220.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:00.546Z,1516736220.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:00.946Z,1516736220.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:01.349Z,1516736221.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:01.741Z,1516736221.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:02.149Z,1516736222.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:02.591Z,1516736222.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:02.954Z,1516736222.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:03.349Z,1516736223.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:03.724Z,1516736223.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:04.129Z,1516736224.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:04.519Z,1516736224.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:04.919Z,1516736224.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:05.333Z,1516736225.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:05.733Z,1516736225.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:06.129Z,1516736226.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:06.529Z,1516736226.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:06.918Z,1516736226.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:07.320Z,1516736227.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:07.720Z,1516736227.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:08.136Z,1516736228.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:08.533Z,1516736228.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:08.941Z,1516736228.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:09.325Z,1516736229.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:09.731Z,1516736229.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:10.125Z,1516736230.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:10.527Z,1516736230.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:13.615Z,1516736233.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:13.746Z,1516736233.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:14.101Z,1516736234.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:14.498Z,1516736234.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:14.881Z,1516736234.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:15.293Z,1516736235.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:15.684Z,1516736235.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:16.097Z,1516736236.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:16.493Z,1516736236.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:16.900Z,1516736236.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:17.286Z,1516736237.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:17.685Z,1516736237.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:18.083Z,1516736238.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:18.485Z,1516736238.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:18.885Z,1516736238.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:19.293Z,1516736239.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:19.695Z,1516736239.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:20.091Z,1516736240.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:20.488Z,1516736240.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:20.897Z,1516736240.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:21.293Z,1516736241.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:21.684Z,1516736241.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:22.097Z,1516736242.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:22.505Z,1516736242.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:22.894Z,1516736242.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:23.283Z,1516736243.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:23.701Z,1516736243.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:24.088Z,1516736244.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:24.493Z,1516736244.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:24.886Z,1516736244.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:25.299Z,1516736245.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:25.696Z,1516736245.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:26.093Z,1516736246.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:26.495Z,1516736246.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:26.891Z,1516736246.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:27.302Z,1516736247.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:27.686Z,1516736247.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:28.105Z,1516736248.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:28.510Z,1516736248.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:28.897Z,1516736248.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:29.289Z,1516736249.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:29.676Z,1516736249.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:30.110Z,1516736250.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:30.473Z,1516736250.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:30.877Z,1516736250.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:31.288Z,1516736251.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:31.702Z,1516736251.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:32.094Z,1516736252.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:32.496Z,1516736252.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:32.889Z,1516736252.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:33.300Z,1516736253.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:33.692Z,1516736253.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:34.105Z,1516736254.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:34.504Z,1516736254.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:34.905Z,1516736254.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:35.281Z,1516736255.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:35.685Z,1516736255.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:36.093Z,1516736256.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:36.489Z,1516736256.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:36.881Z,1516736256.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:37.305Z,1516736257.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:37.693Z,1516736257.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:38.124Z,1516736258.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:38.487Z,1516736258.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:38.882Z,1516736258.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:39.289Z,1516736259.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:39.692Z,1516736259.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:40.104Z,1516736260.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:40.501Z,1516736260.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:40.896Z,1516736260.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:41.296Z,1516736261.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:41.691Z,1516736261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:42.099Z,1516736262.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:42.500Z,1516736262.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:42.897Z,1516736262.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:43.292Z,1516736263.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:43.669Z,1516736263.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:44.109Z,1516736264.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:44.504Z,1516736264.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:44.898Z,1516736264.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:45.280Z,1516736265.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:45.685Z,1516736265.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:46.086Z,1516736266.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:46.494Z,1516736266.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:46.893Z,1516736266.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:47.286Z,1516736267.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:47.680Z,1516736267.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:48.086Z,1516736268.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:48.486Z,1516736268.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:48.914Z,1516736268.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:49.297Z,1516736269.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:49.685Z,1516736269.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:50.082Z,1516736270.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:50.482Z,1516736270.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:50.885Z,1516736270.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:51.297Z,1516736271.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:51.689Z,1516736271.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:52.091Z,1516736272.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:52.487Z,1516736272.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:52.881Z,1516736272.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:53.282Z,1516736273.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:53.685Z,1516736273.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:54.095Z,1516736274.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:54.490Z,1516736274.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:54.889Z,1516736274.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:55.281Z,1516736275.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:55.685Z,1516736275.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:56.097Z,1516736276.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:56.494Z,1516736276.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:56.892Z,1516736276.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:57.287Z,1516736277.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:57.683Z,1516736277.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:58.090Z,1516736278.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:58.498Z,1516736278.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:58.894Z,1516736278.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:59.287Z,1516736279.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:37:59.687Z,1516736279.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:00.092Z,1516736280.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:00.496Z,1516736280.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:00.897Z,1516736280.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:01.290Z,1516736281.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:01.681Z,1516736281.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:02.095Z,1516736282.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:02.496Z,1516736282.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:02.901Z,1516736282.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:03.289Z,1516736283.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:03.701Z,1516736283.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:04.105Z,1516736284.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:04.504Z,1516736284.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:04.897Z,1516736284.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:05.272Z,1516736285.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:05.701Z,1516736285.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:06.102Z,1516736286.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:06.502Z,1516736286.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:06.906Z,1516736286.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:07.280Z,1516736287.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:07.676Z,1516736287.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:08.086Z,1516736288.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:08.514Z,1516736288.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:08.882Z,1516736288.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:09.278Z,1516736289.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:09.679Z,1516736289.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:10.082Z,1516736290.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:10.486Z,1516736290.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:10.883Z,1516736290.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:13.975Z,1516736293.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:13.977Z,1516736293.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:13.977Z,1516736293.977 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 326 2018-01-23T19:38:13.977Z,1516736293.977 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:38:13.990Z,1516736293.990 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:38:14.117Z,1516736294.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:14.129Z,1516736294.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:38:14.129Z,1516736294.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 326 2018-01-23T19:38:14.467Z,1516736294.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:14.468Z,1516736294.468 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:38:14.469Z,1516736294.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:38:14.469Z,1516736294.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:38:14.873Z,1516736294.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:15.266Z,1516736295.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:15.644Z,1516736295.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:16.042Z,1516736296.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:16.444Z,1516736296.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:16.847Z,1516736296.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:17.246Z,1516736297.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:17.650Z,1516736297.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:18.078Z,1516736298.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:18.448Z,1516736298.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:18.845Z,1516736298.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:19.247Z,1516736299.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:19.644Z,1516736299.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:20.046Z,1516736300.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:20.446Z,1516736300.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:20.849Z,1516736300.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:21.246Z,1516736301.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:21.643Z,1516736301.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:22.044Z,1516736302.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:22.457Z,1516736302.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:22.844Z,1516736302.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:23.260Z,1516736303.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:23.657Z,1516736303.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:24.053Z,1516736304.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:24.445Z,1516736304.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:24.844Z,1516736304.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:25.249Z,1516736305.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:25.646Z,1516736305.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:26.045Z,1516736306.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:26.465Z,1516736306.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:26.858Z,1516736306.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:27.254Z,1516736307.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:27.646Z,1516736307.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:28.048Z,1516736308.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:28.449Z,1516736308.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:28.846Z,1516736308.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:28.846Z,1516736308.846 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 326 2018-01-23T19:38:28.846Z,1516736308.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:38:28.848Z,1516736308.848 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:28.848Z,1516736308.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 326 2018-01-23T19:38:28.849Z,1516736308.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:38:28.861Z,1516736308.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:38:28.861Z,1516736308.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:38:29.266Z,1516736309.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:38:29.266Z,1516736309.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 326 2018-01-23T19:38:29.266Z,1516736309.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:38:29.266Z,1516736309.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 326 2018-01-23T19:38:29.657Z,1516736309.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:38:29.657Z,1516736309.657 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:38:29.658Z,1516736309.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:38:29.658Z,1516736309.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:38:29.659Z,1516736309.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:38:29.659Z,1516736309.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:38:30.065Z,1516736310.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:38:30.066Z,1516736310.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:30.447Z,1516736310.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:38:30.448Z,1516736310.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:30.848Z,1516736310.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:38:30.849Z,1516736310.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:31.248Z,1516736311.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:38:31.249Z,1516736311.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:31.657Z,1516736311.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:38:31.658Z,1516736311.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:32.054Z,1516736312.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:38:32.055Z,1516736312.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:32.453Z,1516736312.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:38:32.454Z,1516736312.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:32.866Z,1516736312.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:38:32.867Z,1516736312.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:33.254Z,1516736313.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:38:33.255Z,1516736313.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:33.647Z,1516736313.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:38:33.648Z,1516736313.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:34.057Z,1516736314.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:38:34.058Z,1516736314.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:34.448Z,1516736314.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:38:34.449Z,1516736314.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:34.856Z,1516736314.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:38:34.857Z,1516736314.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:35.267Z,1516736315.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:38:35.268Z,1516736315.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:35.662Z,1516736315.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:38:35.667Z,1516736315.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:36.065Z,1516736316.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:38:36.066Z,1516736316.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:36.444Z,1516736316.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:38:36.445Z,1516736316.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:36.834Z,1516736316.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:38:36.835Z,1516736316.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:37.264Z,1516736317.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:38:37.265Z,1516736317.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:37.641Z,1516736317.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:38:37.641Z,1516736317.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:38.044Z,1516736318.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:38:38.045Z,1516736318.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:38.450Z,1516736318.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:38:38.451Z,1516736318.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:38.875Z,1516736318.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:38:38.876Z,1516736318.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:39.273Z,1516736319.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:38:39.274Z,1516736319.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:39.649Z,1516736319.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:38:39.650Z,1516736319.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:40.052Z,1516736320.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:38:40.053Z,1516736320.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:40.451Z,1516736320.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:38:40.452Z,1516736320.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:40.847Z,1516736320.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:38:40.848Z,1516736320.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:41.255Z,1516736321.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:38:41.256Z,1516736321.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:41.658Z,1516736321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:38:41.659Z,1516736321.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:42.053Z,1516736322.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:38:42.054Z,1516736322.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:42.448Z,1516736322.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:38:42.449Z,1516736322.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:42.844Z,1516736322.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:38:42.845Z,1516736322.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:43.253Z,1516736323.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:38:43.254Z,1516736323.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:43.648Z,1516736323.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:38:43.649Z,1516736323.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:44.044Z,1516736324.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:38:44.045Z,1516736324.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:44.453Z,1516736324.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:38:44.454Z,1516736324.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:44.858Z,1516736324.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:38:44.859Z,1516736324.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:45.253Z,1516736325.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:38:45.253Z,1516736325.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:45.645Z,1516736325.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:38:45.646Z,1516736325.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:46.048Z,1516736326.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:38:46.049Z,1516736326.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:46.448Z,1516736326.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:38:46.449Z,1516736326.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:46.852Z,1516736326.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:38:46.853Z,1516736326.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:47.258Z,1516736327.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:38:47.259Z,1516736327.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:47.653Z,1516736327.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:38:47.654Z,1516736327.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:48.053Z,1516736328.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:38:48.053Z,1516736328.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:48.448Z,1516736328.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:38:48.449Z,1516736328.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:48.850Z,1516736328.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:49.253Z,1516736329.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:49.656Z,1516736329.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:50.053Z,1516736330.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:50.456Z,1516736330.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:50.873Z,1516736330.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:51.256Z,1516736331.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:51.666Z,1516736331.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:52.061Z,1516736332.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:52.452Z,1516736332.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:52.861Z,1516736332.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:53.265Z,1516736333.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:53.665Z,1516736333.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:54.061Z,1516736334.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:54.464Z,1516736334.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:54.841Z,1516736334.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:55.265Z,1516736335.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:55.649Z,1516736335.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:56.042Z,1516736336.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:56.450Z,1516736336.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:56.854Z,1516736336.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:57.246Z,1516736337.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:57.647Z,1516736337.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:58.045Z,1516736338.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:58.446Z,1516736338.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:58.846Z,1516736338.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:59.254Z,1516736339.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:38:59.653Z,1516736339.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:00.056Z,1516736340.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:00.445Z,1516736340.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:00.852Z,1516736340.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:01.246Z,1516736341.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:01.645Z,1516736341.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:02.045Z,1516736342.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:02.453Z,1516736342.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:02.853Z,1516736342.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:03.261Z,1516736343.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:03.649Z,1516736343.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:04.045Z,1516736344.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:04.446Z,1516736344.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:04.851Z,1516736344.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:05.264Z,1516736345.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:05.657Z,1516736345.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:06.054Z,1516736346.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:06.456Z,1516736346.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:06.853Z,1516736346.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:07.254Z,1516736347.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:07.650Z,1516736347.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:08.049Z,1516736348.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:08.458Z,1516736348.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:08.858Z,1516736348.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:09.257Z,1516736349.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:09.664Z,1516736349.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:10.051Z,1516736350.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:10.450Z,1516736350.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:10.851Z,1516736350.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:11.261Z,1516736351.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:14.351Z,1516736354.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:14.517Z,1516736354.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:14.817Z,1516736354.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:15.220Z,1516736355.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:15.621Z,1516736355.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:16.016Z,1516736356.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:16.419Z,1516736356.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:16.818Z,1516736356.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:17.218Z,1516736357.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:17.617Z,1516736357.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:18.016Z,1516736358.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:18.414Z,1516736358.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:18.815Z,1516736358.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:19.251Z,1516736359.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:19.622Z,1516736359.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:20.018Z,1516736360.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:20.416Z,1516736360.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:20.817Z,1516736360.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:21.227Z,1516736361.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:21.629Z,1516736361.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:22.029Z,1516736362.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:22.425Z,1516736362.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:22.815Z,1516736362.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:23.225Z,1516736363.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:23.625Z,1516736363.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:24.025Z,1516736364.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:24.417Z,1516736364.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:24.819Z,1516736364.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:25.225Z,1516736365.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:25.633Z,1516736365.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:26.026Z,1516736366.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:26.417Z,1516736366.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:26.825Z,1516736366.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:27.230Z,1516736367.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:27.633Z,1516736367.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:28.033Z,1516736368.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:28.423Z,1516736368.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:28.829Z,1516736368.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:29.226Z,1516736369.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:29.633Z,1516736369.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:30.026Z,1516736370.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:30.423Z,1516736370.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:30.826Z,1516736370.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:31.227Z,1516736371.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:31.636Z,1516736371.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:32.030Z,1516736372.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:32.424Z,1516736372.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:32.824Z,1516736372.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:33.244Z,1516736373.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:33.630Z,1516736373.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:34.027Z,1516736374.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:34.434Z,1516736374.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:34.824Z,1516736374.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:35.228Z,1516736375.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:35.632Z,1516736375.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:36.030Z,1516736376.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:36.425Z,1516736376.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:36.820Z,1516736376.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:37.226Z,1516736377.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:37.637Z,1516736377.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:38.028Z,1516736378.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:38.424Z,1516736378.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:38.824Z,1516736378.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:39.231Z,1516736379.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:39.630Z,1516736379.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:40.027Z,1516736380.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:40.421Z,1516736380.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:40.828Z,1516736380.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:41.225Z,1516736381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:41.636Z,1516736381.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:42.032Z,1516736382.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:42.436Z,1516736382.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:42.834Z,1516736382.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:43.228Z,1516736383.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:43.624Z,1516736383.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:44.038Z,1516736384.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:44.433Z,1516736384.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:44.834Z,1516736384.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:45.238Z,1516736385.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:45.629Z,1516736385.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:46.013Z,1516736386.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:46.416Z,1516736386.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:46.837Z,1516736386.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:47.242Z,1516736387.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:47.625Z,1516736387.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:48.018Z,1516736388.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:48.421Z,1516736388.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:48.816Z,1516736388.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:49.215Z,1516736389.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:49.618Z,1516736389.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:50.022Z,1516736390.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:50.418Z,1516736390.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:50.814Z,1516736390.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:51.215Z,1516736391.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:51.615Z,1516736391.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:52.025Z,1516736392.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:52.430Z,1516736392.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:52.826Z,1516736392.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:53.222Z,1516736393.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:53.616Z,1516736393.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:54.028Z,1516736394.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:54.421Z,1516736394.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:54.817Z,1516736394.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:55.215Z,1516736395.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:55.621Z,1516736395.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:56.032Z,1516736396.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:56.429Z,1516736396.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:56.825Z,1516736396.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:57.215Z,1516736397.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:57.623Z,1516736397.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:58.015Z,1516736398.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:58.425Z,1516736398.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:58.829Z,1516736398.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:59.229Z,1516736399.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:39:59.616Z,1516736399.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:00.016Z,1516736400.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:00.416Z,1516736400.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:00.825Z,1516736400.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:01.225Z,1516736401.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:01.629Z,1516736401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:02.024Z,1516736402.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:02.433Z,1516736402.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:02.825Z,1516736402.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:03.215Z,1516736403.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:03.620Z,1516736403.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:04.014Z,1516736404.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:04.432Z,1516736404.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:04.826Z,1516736404.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:05.229Z,1516736405.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:05.620Z,1516736405.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:06.018Z,1516736406.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:06.424Z,1516736406.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:06.816Z,1516736406.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:07.215Z,1516736407.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:07.633Z,1516736407.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:08.036Z,1516736408.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:08.433Z,1516736408.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:08.821Z,1516736408.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:09.221Z,1516736409.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:09.621Z,1516736409.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:10.016Z,1516736410.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:10.428Z,1516736410.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:10.825Z,1516736410.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:11.226Z,1516736411.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:11.625Z,1516736411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:14.710Z,1516736414.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:14.833Z,1516736414.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:15.213Z,1516736415.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:15.618Z,1516736415.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:15.990Z,1516736415.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:16.384Z,1516736416.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:16.788Z,1516736416.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:17.184Z,1516736417.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:17.612Z,1516736417.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:17.992Z,1516736417.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:18.388Z,1516736418.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:18.783Z,1516736418.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:19.184Z,1516736419.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:19.581Z,1516736419.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:19.982Z,1516736419.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:20.393Z,1516736420.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:20.790Z,1516736420.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:21.198Z,1516736421.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:21.588Z,1516736421.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:21.986Z,1516736421.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:22.393Z,1516736422.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:22.787Z,1516736422.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:23.193Z,1516736423.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:23.590Z,1516736423.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:23.989Z,1516736423.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:24.390Z,1516736424.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:24.790Z,1516736424.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:25.183Z,1516736425.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:25.584Z,1516736425.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:25.988Z,1516736425.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:26.392Z,1516736426.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:26.794Z,1516736426.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:27.189Z,1516736427.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:27.588Z,1516736427.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:27.983Z,1516736427.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:28.393Z,1516736428.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:28.788Z,1516736428.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:29.193Z,1516736429.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:29.592Z,1516736429.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:29.997Z,1516736429.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:30.390Z,1516736430.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:30.785Z,1516736430.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:31.193Z,1516736431.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:31.578Z,1516736431.578 [PNI_TCM](ERROR): CRC does not match. Expected:0x65174 got:0x64846 2018-01-23T19:40:31.605Z,1516736431.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:31.986Z,1516736431.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:32.401Z,1516736432.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:32.795Z,1516736432.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:33.192Z,1516736433.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:33.583Z,1516736433.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:33.981Z,1516736433.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:34.419Z,1516736434.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:34.784Z,1516736434.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:35.182Z,1516736435.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:35.599Z,1516736435.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:35.997Z,1516736435.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:36.394Z,1516736436.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:36.786Z,1516736436.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:37.189Z,1516736437.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:37.605Z,1516736437.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:37.981Z,1516736437.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T19:40:38.009Z,1516736438.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:38.404Z,1516736438.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:38.794Z,1516736438.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:39.205Z,1516736439.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:39.591Z,1516736439.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:39.989Z,1516736439.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:40.389Z,1516736440.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:40.795Z,1516736440.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:41.188Z,1516736441.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:41.595Z,1516736441.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:41.996Z,1516736441.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:42.405Z,1516736442.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:42.794Z,1516736442.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:43.195Z,1516736443.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:43.589Z,1516736443.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:43.999Z,1516736443.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:44.408Z,1516736444.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:44.801Z,1516736444.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:45.200Z,1516736445.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:45.598Z,1516736445.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:45.980Z,1516736445.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:46.394Z,1516736446.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:46.776Z,1516736446.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:47.202Z,1516736447.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:47.607Z,1516736447.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:48.009Z,1516736448.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:48.405Z,1516736448.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:48.812Z,1516736448.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:49.194Z,1516736449.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:49.587Z,1516736449.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:49.993Z,1516736449.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:50.391Z,1516736450.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:50.799Z,1516736450.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:51.193Z,1516736451.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:51.595Z,1516736451.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:51.977Z,1516736451.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:52.389Z,1516736452.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:52.796Z,1516736452.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:53.194Z,1516736453.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:53.607Z,1516736453.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:54.010Z,1516736454.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:54.407Z,1516736454.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:54.772Z,1516736454.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:55.176Z,1516736455.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:55.577Z,1516736455.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:55.985Z,1516736455.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:56.390Z,1516736456.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:56.787Z,1516736456.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:57.193Z,1516736457.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:57.584Z,1516736457.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:57.978Z,1516736457.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:58.385Z,1516736458.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:58.786Z,1516736458.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:59.189Z,1516736459.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:59.593Z,1516736459.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:40:59.983Z,1516736459.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:00.389Z,1516736460.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:00.786Z,1516736460.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:01.187Z,1516736461.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:01.584Z,1516736461.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:01.988Z,1516736461.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:02.386Z,1516736462.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:02.786Z,1516736462.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:03.189Z,1516736463.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:03.585Z,1516736463.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:03.989Z,1516736463.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:04.396Z,1516736464.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:04.790Z,1516736464.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:05.189Z,1516736465.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:05.583Z,1516736465.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:05.988Z,1516736465.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:06.396Z,1516736466.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:06.794Z,1516736466.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:07.191Z,1516736467.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:07.580Z,1516736467.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:07.985Z,1516736467.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:08.391Z,1516736468.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:08.795Z,1516736468.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:09.189Z,1516736469.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:09.580Z,1516736469.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:09.981Z,1516736469.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:10.393Z,1516736470.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:10.396Z,1516736470.396 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:36:10.1Z 2018-01-23T19:41:10.396Z,1516736470.396 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T19:41:10.396Z,1516736470.396 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T19:41:10.802Z,1516736470.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:11.321Z,1516736471.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:11.601Z,1516736471.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:14.734Z,1516736474.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:14.736Z,1516736474.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:14.736Z,1516736474.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 327 2018-01-23T19:41:14.736Z,1516736474.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:41:14.748Z,1516736474.748 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:41:14.823Z,1516736474.823 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0384.lzma 2018-01-23T19:41:14.877Z,1516736474.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:14.898Z,1516736474.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:41:14.898Z,1516736474.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 327 2018-01-23T19:41:15.233Z,1516736475.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:15.234Z,1516736475.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:41:15.234Z,1516736475.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:41:15.235Z,1516736475.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:41:15.558Z,1516736475.558 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0384.lzma.bak 2018-01-23T19:41:15.558Z,1516736475.558 [DataOverHttps](INFO): SBD MOMSN=7756533 2018-01-23T19:41:15.633Z,1516736475.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:16.259Z,1516736476.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:16.424Z,1516736476.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:19.499Z,1516736479.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:19.640Z,1516736479.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:19.986Z,1516736479.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:20.390Z,1516736480.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:20.782Z,1516736480.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:21.165Z,1516736481.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:24.256Z,1516736484.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:24.336Z,1516736484.336 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0385.lzma 2018-01-23T19:41:24.401Z,1516736484.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:24.741Z,1516736484.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:25.085Z,1516736485.085 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0385.lzma.bak 2018-01-23T19:41:25.086Z,1516736485.086 [DataOverHttps](INFO): SBD MOMSN=7756535 2018-01-23T19:41:25.158Z,1516736485.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:25.787Z,1516736485.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:25.790Z,1516736485.790 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:41:25.790Z,1516736485.790 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:41:25.790Z,1516736485.790 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:41:25.941Z,1516736485.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.051Z,1516736489.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.188Z,1516736489.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.541Z,1516736489.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.942Z,1516736489.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.942Z,1516736489.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 327 2018-01-23T19:41:29.942Z,1516736489.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:41:29.944Z,1516736489.944 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:29.944Z,1516736489.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 327 2018-01-23T19:41:29.944Z,1516736489.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:41:29.956Z,1516736489.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:41:29.957Z,1516736489.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:41:30.364Z,1516736490.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:41:30.364Z,1516736490.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 327 2018-01-23T19:41:30.364Z,1516736490.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:41:30.364Z,1516736490.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 327 2018-01-23T19:41:30.719Z,1516736490.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:41:30.720Z,1516736490.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:41:30.720Z,1516736490.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:41:30.720Z,1516736490.720 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:41:30.721Z,1516736490.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:41:30.721Z,1516736490.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:41:31.120Z,1516736491.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:41:31.121Z,1516736491.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:31.514Z,1516736491.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:41:31.543Z,1516736491.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:31.916Z,1516736491.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:41:31.917Z,1516736491.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:32.316Z,1516736492.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:41:32.317Z,1516736492.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:32.725Z,1516736492.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:41:32.726Z,1516736492.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:33.121Z,1516736493.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:41:33.122Z,1516736493.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:33.520Z,1516736493.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:41:33.521Z,1516736493.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:33.914Z,1516736493.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:41:33.915Z,1516736493.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:34.314Z,1516736494.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:41:34.315Z,1516736494.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:34.716Z,1516736494.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:41:34.717Z,1516736494.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:35.116Z,1516736495.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:41:35.117Z,1516736495.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:35.520Z,1516736495.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:41:35.521Z,1516736495.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:35.927Z,1516736495.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:41:35.928Z,1516736495.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:36.328Z,1516736496.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:41:36.329Z,1516736496.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:36.715Z,1516736496.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:41:36.716Z,1516736496.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:37.116Z,1516736497.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:41:37.117Z,1516736497.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:37.515Z,1516736497.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:41:37.516Z,1516736497.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:37.918Z,1516736497.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:41:37.919Z,1516736497.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:38.316Z,1516736498.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:41:38.317Z,1516736498.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:38.732Z,1516736498.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:41:38.733Z,1516736498.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:39.129Z,1516736499.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:41:39.130Z,1516736499.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:39.526Z,1516736499.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:41:39.527Z,1516736499.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:39.917Z,1516736499.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:41:39.918Z,1516736499.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:40.326Z,1516736500.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:41:40.327Z,1516736500.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:40.717Z,1516736500.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:41:40.718Z,1516736500.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:41.127Z,1516736501.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:41:41.128Z,1516736501.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:41.526Z,1516736501.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:41:41.527Z,1516736501.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:41.930Z,1516736501.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:41:41.931Z,1516736501.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:42.325Z,1516736502.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:41:42.326Z,1516736502.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:42.716Z,1516736502.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:41:42.717Z,1516736502.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:43.120Z,1516736503.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:41:43.121Z,1516736503.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:43.515Z,1516736503.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:41:43.516Z,1516736503.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:43.923Z,1516736503.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:41:43.924Z,1516736503.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:44.332Z,1516736504.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:41:44.333Z,1516736504.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:44.726Z,1516736504.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:41:44.727Z,1516736504.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:45.128Z,1516736505.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:41:45.129Z,1516736505.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:45.527Z,1516736505.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:41:45.528Z,1516736505.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:45.923Z,1516736505.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:41:45.924Z,1516736505.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:46.324Z,1516736506.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:41:46.324Z,1516736506.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:46.732Z,1516736506.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:41:46.733Z,1516736506.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:47.123Z,1516736507.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:41:47.124Z,1516736507.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:47.529Z,1516736507.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:41:47.530Z,1516736507.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:47.930Z,1516736507.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:41:47.931Z,1516736507.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:48.325Z,1516736508.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:41:48.326Z,1516736508.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:48.722Z,1516736508.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:41:48.724Z,1516736508.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:49.129Z,1516736509.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:41:49.130Z,1516736509.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:49.526Z,1516736509.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:41:49.527Z,1516736509.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:49.925Z,1516736509.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:41:49.926Z,1516736509.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:50.325Z,1516736510.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:50.737Z,1516736510.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:51.130Z,1516736511.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:51.581Z,1516736511.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:51.905Z,1516736511.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:52.307Z,1516736512.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:52.733Z,1516736512.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:53.137Z,1516736513.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:53.542Z,1516736513.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:53.946Z,1516736513.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:54.318Z,1516736514.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:54.721Z,1516736514.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:55.117Z,1516736515.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:55.518Z,1516736515.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:55.918Z,1516736515.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:56.321Z,1516736516.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:56.733Z,1516736516.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:57.137Z,1516736517.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:57.531Z,1516736517.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:57.924Z,1516736517.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:58.325Z,1516736518.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:58.721Z,1516736518.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:59.118Z,1516736519.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:59.537Z,1516736519.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:41:59.932Z,1516736519.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:00.341Z,1516736520.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:00.729Z,1516736520.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:01.125Z,1516736521.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:01.529Z,1516736521.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:01.924Z,1516736521.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:02.307Z,1516736522.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:02.736Z,1516736522.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:03.131Z,1516736523.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:03.530Z,1516736523.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:03.928Z,1516736523.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:04.327Z,1516736524.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:04.729Z,1516736524.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:05.127Z,1516736525.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:05.535Z,1516736525.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:05.941Z,1516736525.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:06.333Z,1516736526.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:06.727Z,1516736526.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:07.130Z,1516736527.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:07.528Z,1516736527.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:07.931Z,1516736527.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:08.330Z,1516736528.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:08.731Z,1516736528.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:09.133Z,1516736529.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:09.535Z,1516736529.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:09.932Z,1516736529.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:10.332Z,1516736530.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:10.738Z,1516736530.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:11.133Z,1516736531.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:11.537Z,1516736531.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:11.938Z,1516736531.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:12.334Z,1516736532.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:12.733Z,1516736532.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:13.137Z,1516736533.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:13.533Z,1516736533.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:13.933Z,1516736533.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:14.337Z,1516736534.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:14.734Z,1516736534.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:15.139Z,1516736535.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:15.537Z,1516736535.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:15.933Z,1516736535.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:16.333Z,1516736536.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:16.726Z,1516736536.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:17.117Z,1516736537.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:17.522Z,1516736537.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:17.925Z,1516736537.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:18.319Z,1516736538.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:18.725Z,1516736538.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:19.115Z,1516736539.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:19.518Z,1516736539.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:19.918Z,1516736539.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:20.316Z,1516736540.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:20.729Z,1516736540.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:21.133Z,1516736541.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:21.537Z,1516736541.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:21.925Z,1516736541.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:22.325Z,1516736542.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:22.717Z,1516736542.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:23.122Z,1516736543.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:23.530Z,1516736543.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:23.939Z,1516736543.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:24.330Z,1516736544.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:24.724Z,1516736544.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:25.130Z,1516736545.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:25.530Z,1516736545.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:25.930Z,1516736545.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:26.330Z,1516736546.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:29.429Z,1516736549.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:29.576Z,1516736549.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:29.902Z,1516736549.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:30.322Z,1516736550.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:30.710Z,1516736550.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:31.096Z,1516736551.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:31.500Z,1516736551.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:31.905Z,1516736551.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:32.301Z,1516736552.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:32.703Z,1516736552.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:33.102Z,1516736553.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:33.509Z,1516736553.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:33.900Z,1516736553.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:34.300Z,1516736554.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:34.702Z,1516736554.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:35.101Z,1516736555.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:35.511Z,1516736555.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:35.911Z,1516736555.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:36.316Z,1516736556.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:36.704Z,1516736556.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:37.102Z,1516736557.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:37.507Z,1516736557.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:37.910Z,1516736557.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:38.307Z,1516736558.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:38.709Z,1516736558.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:39.097Z,1516736559.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:39.507Z,1516736559.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:39.910Z,1516736559.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:40.315Z,1516736560.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:40.703Z,1516736560.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:41.106Z,1516736561.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:41.510Z,1516736561.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:41.920Z,1516736561.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:42.307Z,1516736562.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:42.713Z,1516736562.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:43.109Z,1516736563.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:43.511Z,1516736563.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:43.914Z,1516736563.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:44.306Z,1516736564.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:44.709Z,1516736564.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:45.098Z,1516736565.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:45.517Z,1516736565.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:45.916Z,1516736565.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:46.307Z,1516736566.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:46.698Z,1516736566.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:47.110Z,1516736567.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:47.501Z,1516736567.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:47.913Z,1516736567.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:48.310Z,1516736568.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:48.707Z,1516736568.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:49.103Z,1516736569.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:49.508Z,1516736569.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:49.902Z,1516736569.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:50.303Z,1516736570.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:50.713Z,1516736570.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:51.109Z,1516736571.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:51.507Z,1516736571.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:51.905Z,1516736571.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:52.297Z,1516736572.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:52.704Z,1516736572.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:53.109Z,1516736573.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:53.501Z,1516736573.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:53.921Z,1516736573.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:54.315Z,1516736574.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:54.711Z,1516736574.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:55.104Z,1516736575.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:55.505Z,1516736575.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:55.904Z,1516736575.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:56.304Z,1516736576.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:56.708Z,1516736576.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:57.114Z,1516736577.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:57.512Z,1516736577.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:57.900Z,1516736577.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:58.301Z,1516736578.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:58.704Z,1516736578.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:59.109Z,1516736579.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:59.505Z,1516736579.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:42:59.917Z,1516736579.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:00.310Z,1516736580.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:00.712Z,1516736580.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:01.105Z,1516736581.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:01.507Z,1516736581.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:01.898Z,1516736581.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:02.303Z,1516736582.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:02.713Z,1516736582.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:03.109Z,1516736583.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:03.506Z,1516736583.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:03.905Z,1516736583.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:04.297Z,1516736584.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:04.705Z,1516736584.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:05.105Z,1516736585.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:05.505Z,1516736585.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:05.906Z,1516736585.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:06.308Z,1516736586.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:06.713Z,1516736586.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:07.105Z,1516736587.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:07.510Z,1516736587.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:07.907Z,1516736587.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:08.307Z,1516736588.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:08.717Z,1516736588.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:09.111Z,1516736589.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:09.515Z,1516736589.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:09.909Z,1516736589.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:10.307Z,1516736590.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:10.707Z,1516736590.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:11.111Z,1516736591.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:11.507Z,1516736591.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:11.913Z,1516736591.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:12.313Z,1516736592.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:12.716Z,1516736592.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:13.108Z,1516736593.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:13.511Z,1516736593.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:13.908Z,1516736593.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:14.309Z,1516736594.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:14.716Z,1516736594.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:15.125Z,1516736595.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:15.521Z,1516736595.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:15.892Z,1516736595.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:16.301Z,1516736596.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:16.693Z,1516736596.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:17.097Z,1516736597.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:17.493Z,1516736597.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:17.902Z,1516736597.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:18.302Z,1516736598.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:18.698Z,1516736598.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:19.095Z,1516736599.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:19.497Z,1516736599.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:19.895Z,1516736599.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:20.301Z,1516736600.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:20.702Z,1516736600.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:21.098Z,1516736601.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:21.525Z,1516736601.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:21.905Z,1516736601.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:22.295Z,1516736602.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:22.695Z,1516736602.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:23.097Z,1516736603.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:23.495Z,1516736603.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:23.899Z,1516736603.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:24.303Z,1516736604.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:24.699Z,1516736604.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:25.094Z,1516736605.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:25.496Z,1516736605.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:25.899Z,1516736605.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:26.295Z,1516736606.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:26.699Z,1516736606.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:29.845Z,1516736609.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:29.997Z,1516736609.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:30.339Z,1516736610.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:30.739Z,1516736610.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:31.136Z,1516736611.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:31.541Z,1516736611.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:31.950Z,1516736611.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:32.353Z,1516736612.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:32.742Z,1516736612.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:33.127Z,1516736613.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:33.529Z,1516736613.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:33.926Z,1516736613.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:34.336Z,1516736614.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:34.757Z,1516736614.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:35.158Z,1516736615.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:35.541Z,1516736615.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:35.929Z,1516736615.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:36.334Z,1516736616.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:36.732Z,1516736616.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:37.133Z,1516736617.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:37.530Z,1516736617.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:37.939Z,1516736617.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:38.342Z,1516736618.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:38.742Z,1516736618.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:39.135Z,1516736619.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:39.537Z,1516736619.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:39.935Z,1516736619.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:40.333Z,1516736620.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:40.738Z,1516736620.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:41.146Z,1516736621.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:41.539Z,1516736621.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:41.935Z,1516736621.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:42.335Z,1516736622.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:42.739Z,1516736622.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:43.139Z,1516736623.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:43.540Z,1516736623.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:43.941Z,1516736623.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:44.342Z,1516736624.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:44.748Z,1516736624.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:45.139Z,1516736625.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:45.539Z,1516736625.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:45.932Z,1516736625.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:46.319Z,1516736626.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:46.744Z,1516736626.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:47.151Z,1516736627.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:47.553Z,1516736627.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:47.925Z,1516736627.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:48.349Z,1516736628.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:48.727Z,1516736628.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:49.127Z,1516736629.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:49.527Z,1516736629.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:49.956Z,1516736629.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:50.350Z,1516736630.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:50.758Z,1516736630.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:51.127Z,1516736631.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:51.556Z,1516736631.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:51.932Z,1516736631.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:52.328Z,1516736632.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:52.734Z,1516736632.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:53.158Z,1516736633.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:53.561Z,1516736633.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:53.933Z,1516736633.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:54.333Z,1516736634.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:54.733Z,1516736634.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:55.141Z,1516736635.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:55.528Z,1516736635.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:55.933Z,1516736635.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:56.339Z,1516736636.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:56.764Z,1516736636.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:57.128Z,1516736637.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:57.527Z,1516736637.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:57.941Z,1516736637.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:58.333Z,1516736638.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:58.737Z,1516736638.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:59.134Z,1516736639.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:59.540Z,1516736639.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:43:59.932Z,1516736639.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:00.337Z,1516736640.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:00.728Z,1516736640.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:01.141Z,1516736641.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:01.537Z,1516736641.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:01.946Z,1516736641.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:02.362Z,1516736642.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:02.745Z,1516736642.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:03.131Z,1516736643.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:03.529Z,1516736643.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:03.933Z,1516736643.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:04.332Z,1516736644.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:04.737Z,1516736644.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:05.150Z,1516736645.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:05.542Z,1516736645.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:05.935Z,1516736645.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:06.332Z,1516736646.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:06.733Z,1516736646.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:07.131Z,1516736647.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:07.533Z,1516736647.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:07.940Z,1516736647.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:08.337Z,1516736648.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:08.749Z,1516736648.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:09.135Z,1516736649.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:09.528Z,1516736649.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:09.932Z,1516736649.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:10.342Z,1516736650.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:10.742Z,1516736650.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:11.143Z,1516736651.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:11.539Z,1516736651.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:11.942Z,1516736651.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:12.341Z,1516736652.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:12.738Z,1516736652.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:13.141Z,1516736653.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:13.541Z,1516736653.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:13.946Z,1516736653.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:14.348Z,1516736654.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:14.742Z,1516736654.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:15.137Z,1516736655.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:15.541Z,1516736655.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:15.543Z,1516736655.543 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:15.544Z,1516736655.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 328 2018-01-23T19:44:15.544Z,1516736655.544 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:44:15.556Z,1516736655.556 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:44:15.940Z,1516736655.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:15.952Z,1516736655.952 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:44:15.952Z,1516736655.952 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 328 2018-01-23T19:44:16.337Z,1516736656.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:16.338Z,1516736656.338 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:44:16.338Z,1516736656.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:44:16.339Z,1516736656.339 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:44:16.743Z,1516736656.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:17.149Z,1516736657.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:17.545Z,1516736657.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:17.941Z,1516736657.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:18.325Z,1516736658.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:18.750Z,1516736658.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:19.151Z,1516736659.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:19.529Z,1516736659.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:19.956Z,1516736659.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:20.356Z,1516736660.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:20.737Z,1516736660.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:21.130Z,1516736661.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:21.529Z,1516736661.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:21.950Z,1516736661.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:22.335Z,1516736662.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:22.741Z,1516736662.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:23.139Z,1516736663.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:23.561Z,1516736663.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:23.926Z,1516736663.926 [PNI_TCM](ERROR): CRC does not match. Expected:0x28576 got:0x19924 2018-01-23T19:44:23.960Z,1516736663.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:24.321Z,1516736664.321 [PNI_TCM](ERROR): CRC does not match. Expected:0x59616 got:0x1857 2018-01-23T19:44:24.360Z,1516736664.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:24.731Z,1516736664.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:25.156Z,1516736665.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:25.533Z,1516736665.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:25.945Z,1516736665.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:26.340Z,1516736666.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:26.760Z,1516736666.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:29.821Z,1516736669.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:29.968Z,1516736669.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:30.294Z,1516736670.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:30.725Z,1516736670.725 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:30.725Z,1516736670.725 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 328 2018-01-23T19:44:30.725Z,1516736670.725 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:44:30.728Z,1516736670.728 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:30.728Z,1516736670.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 328 2018-01-23T19:44:30.728Z,1516736670.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:44:30.741Z,1516736670.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:44:30.741Z,1516736670.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:44:31.104Z,1516736671.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:44:31.104Z,1516736671.104 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 328 2018-01-23T19:44:31.105Z,1516736671.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:44:31.105Z,1516736671.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 328 2018-01-23T19:44:31.489Z,1516736671.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:44:31.489Z,1516736671.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:44:31.490Z,1516736671.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:44:31.490Z,1516736671.490 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:44:31.495Z,1516736671.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:44:31.495Z,1516736671.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:44:31.900Z,1516736671.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:44:31.901Z,1516736671.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:32.289Z,1516736672.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:44:32.290Z,1516736672.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:32.713Z,1516736672.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:44:32.719Z,1516736672.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:33.111Z,1516736673.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:44:33.111Z,1516736673.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:33.505Z,1516736673.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:44:33.506Z,1516736673.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:33.900Z,1516736673.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:44:33.901Z,1516736673.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:34.300Z,1516736674.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:44:34.301Z,1516736674.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:34.702Z,1516736674.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:44:34.703Z,1516736674.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:35.103Z,1516736675.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:44:35.104Z,1516736675.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:35.499Z,1516736675.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:44:35.500Z,1516736675.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:35.897Z,1516736675.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:44:35.898Z,1516736675.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:36.296Z,1516736676.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:44:36.297Z,1516736676.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:36.712Z,1516736676.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:44:36.713Z,1516736676.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:37.109Z,1516736677.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:44:37.110Z,1516736677.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:37.506Z,1516736677.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:44:37.507Z,1516736677.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:37.520Z,1516736677.520 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:44:37.902Z,1516736677.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:44:37.903Z,1516736677.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:38.295Z,1516736678.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:44:38.296Z,1516736678.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:38.702Z,1516736678.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:44:38.703Z,1516736678.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:39.103Z,1516736679.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:44:39.104Z,1516736679.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:39.501Z,1516736679.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:44:39.502Z,1516736679.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:39.898Z,1516736679.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:44:39.899Z,1516736679.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:40.298Z,1516736680.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:44:40.299Z,1516736680.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:40.700Z,1516736680.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:44:40.701Z,1516736680.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:41.113Z,1516736681.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:44:41.113Z,1516736681.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:41.508Z,1516736681.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:44:41.509Z,1516736681.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:41.894Z,1516736681.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:44:41.895Z,1516736681.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:42.294Z,1516736682.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:44:42.296Z,1516736682.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:42.716Z,1516736682.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:44:42.717Z,1516736682.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:43.102Z,1516736683.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:44:43.104Z,1516736683.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:43.508Z,1516736683.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:44:43.509Z,1516736683.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:43.900Z,1516736683.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:44:43.901Z,1516736683.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:44.299Z,1516736684.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:44:44.300Z,1516736684.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:44.707Z,1516736684.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:44:44.708Z,1516736684.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:45.103Z,1516736685.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:44:45.104Z,1516736685.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:45.508Z,1516736685.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:44:45.509Z,1516736685.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:45.892Z,1516736685.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:44:45.893Z,1516736685.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:46.309Z,1516736686.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:44:46.310Z,1516736686.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:46.700Z,1516736686.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:44:46.701Z,1516736686.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:47.111Z,1516736687.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:44:47.112Z,1516736687.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:47.509Z,1516736687.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:44:47.510Z,1516736687.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:47.900Z,1516736687.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:44:47.901Z,1516736687.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:48.283Z,1516736688.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:44:48.284Z,1516736688.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:48.722Z,1516736688.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:44:48.723Z,1516736688.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:49.109Z,1516736689.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:44:49.110Z,1516736689.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:49.516Z,1516736689.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:44:49.517Z,1516736689.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:49.917Z,1516736689.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:44:49.918Z,1516736689.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:50.287Z,1516736690.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:44:50.288Z,1516736690.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:50.714Z,1516736690.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:44:50.719Z,1516736690.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:51.098Z,1516736691.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:51.491Z,1516736691.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:51.886Z,1516736691.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:52.298Z,1516736692.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:52.687Z,1516736692.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:53.091Z,1516736693.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:53.495Z,1516736693.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:53.890Z,1516736693.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:54.286Z,1516736694.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:54.689Z,1516736694.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:55.086Z,1516736695.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:55.492Z,1516736695.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:55.894Z,1516736695.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:56.297Z,1516736696.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:56.697Z,1516736696.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:57.089Z,1516736697.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:57.486Z,1516736697.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:57.897Z,1516736697.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:58.289Z,1516736698.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:58.697Z,1516736698.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:59.098Z,1516736699.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:59.494Z,1516736699.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:44:59.887Z,1516736699.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:00.296Z,1516736700.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:00.692Z,1516736700.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:01.097Z,1516736701.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:01.501Z,1516736701.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:01.902Z,1516736701.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:02.295Z,1516736702.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:02.695Z,1516736702.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:03.101Z,1516736703.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:03.497Z,1516736703.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:03.902Z,1516736703.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:04.307Z,1516736704.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:04.699Z,1516736704.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:05.090Z,1516736705.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:05.500Z,1516736705.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:05.893Z,1516736705.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:06.299Z,1516736706.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:06.707Z,1516736706.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:07.103Z,1516736707.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:07.517Z,1516736707.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:07.904Z,1516736707.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:08.300Z,1516736708.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:08.700Z,1516736708.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:09.093Z,1516736709.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:09.501Z,1516736709.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:09.913Z,1516736709.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:10.317Z,1516736710.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:10.709Z,1516736710.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:11.113Z,1516736711.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:11.483Z,1516736711.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:11.891Z,1516736711.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:12.293Z,1516736712.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:12.688Z,1516736712.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:13.090Z,1516736713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:13.494Z,1516736713.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:13.890Z,1516736713.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:14.289Z,1516736714.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:14.686Z,1516736714.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:15.088Z,1516736715.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:15.487Z,1516736715.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:15.890Z,1516736715.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:16.320Z,1516736716.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:16.717Z,1516736716.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:17.093Z,1516736717.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:17.488Z,1516736717.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:17.888Z,1516736717.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:18.296Z,1516736718.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:18.689Z,1516736718.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:19.116Z,1516736719.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:19.495Z,1516736719.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:19.891Z,1516736719.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:20.287Z,1516736720.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:20.697Z,1516736720.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:21.093Z,1516736721.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:21.497Z,1516736721.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:21.897Z,1516736721.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:22.298Z,1516736722.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:22.701Z,1516736722.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:23.087Z,1516736723.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:23.492Z,1516736723.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:23.897Z,1516736723.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:24.290Z,1516736724.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:24.687Z,1516736724.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:25.052Z,1516736725.052 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:45:25.052Z,1516736725.052 [NAL9602] Data Fault, FailCount= 5 2018-01-23T19:45:25.052Z,1516736725.052 [NAL9602](ERROR): Data Fault 2018-01-23T19:45:25.105Z,1516736725.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:25.139Z,1516736725.139 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:45:25.139Z,1516736725.139 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T19:45:25.448Z,1516736725.448 [NAL9602](INFO): Powering down 2018-01-23T19:45:25.505Z,1516736725.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:25.525Z,1516736725.525 [CBIT](INFO): Critical error at 20180123T194525 2018-01-23T19:45:25.898Z,1516736725.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:26.296Z,1516736726.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:26.694Z,1516736726.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:27.091Z,1516736727.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:30.182Z,1516736730.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:30.327Z,1516736730.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:30.645Z,1516736730.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:31.057Z,1516736731.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:31.443Z,1516736731.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:31.845Z,1516736731.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:32.249Z,1516736732.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:32.645Z,1516736732.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:33.052Z,1516736733.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:33.450Z,1516736733.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:33.845Z,1516736733.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:34.245Z,1516736734.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:34.650Z,1516736734.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:35.046Z,1516736735.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:35.445Z,1516736735.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:35.853Z,1516736735.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:36.246Z,1516736736.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:36.653Z,1516736736.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:37.047Z,1516736737.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:37.446Z,1516736737.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:37.847Z,1516736737.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:38.250Z,1516736738.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:38.646Z,1516736738.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:39.047Z,1516736739.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:39.457Z,1516736739.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:39.850Z,1516736739.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:40.247Z,1516736740.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:40.656Z,1516736740.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:41.047Z,1516736741.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:41.452Z,1516736741.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:41.851Z,1516736741.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:42.248Z,1516736742.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:42.659Z,1516736742.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:43.057Z,1516736743.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:43.456Z,1516736743.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:43.860Z,1516736743.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:44.250Z,1516736744.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:44.656Z,1516736744.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:45.060Z,1516736745.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:45.436Z,1516736745.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:45.838Z,1516736745.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:46.238Z,1516736746.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:46.640Z,1516736746.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:47.050Z,1516736747.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:47.446Z,1516736747.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:47.843Z,1516736747.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:48.246Z,1516736748.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:48.642Z,1516736748.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:49.039Z,1516736749.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:49.443Z,1516736749.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:49.850Z,1516736749.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:50.246Z,1516736750.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:50.646Z,1516736750.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:51.043Z,1516736751.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:51.439Z,1516736751.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:51.850Z,1516736751.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:52.245Z,1516736752.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:52.642Z,1516736752.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:53.045Z,1516736753.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:53.450Z,1516736753.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:53.848Z,1516736753.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:54.248Z,1516736754.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:54.643Z,1516736754.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:55.043Z,1516736755.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:55.445Z,1516736755.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:55.852Z,1516736755.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:56.255Z,1516736756.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:56.645Z,1516736756.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:57.052Z,1516736757.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:57.442Z,1516736757.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:57.845Z,1516736757.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:58.244Z,1516736758.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:58.643Z,1516736758.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:59.047Z,1516736759.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:59.452Z,1516736759.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:45:59.844Z,1516736759.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:00.245Z,1516736760.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:00.652Z,1516736760.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:01.044Z,1516736761.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:01.445Z,1516736761.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:01.844Z,1516736761.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:02.256Z,1516736762.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:02.644Z,1516736762.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:03.044Z,1516736763.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:03.442Z,1516736763.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:03.848Z,1516736763.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:04.250Z,1516736764.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:04.643Z,1516736764.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:05.047Z,1516736765.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:05.453Z,1516736765.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:05.845Z,1516736765.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:06.248Z,1516736766.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:06.649Z,1516736766.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:07.043Z,1516736767.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:07.448Z,1516736767.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:07.847Z,1516736767.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:08.246Z,1516736768.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:08.647Z,1516736768.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:09.048Z,1516736769.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:09.443Z,1516736769.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:09.847Z,1516736769.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:10.247Z,1516736770.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:10.643Z,1516736770.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:11.049Z,1516736771.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:11.453Z,1516736771.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:11.843Z,1516736771.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:12.248Z,1516736772.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:12.650Z,1516736772.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:13.055Z,1516736773.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:13.454Z,1516736773.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:13.856Z,1516736773.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:14.245Z,1516736774.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:14.650Z,1516736774.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:15.049Z,1516736775.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:15.453Z,1516736775.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:15.850Z,1516736775.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:16.249Z,1516736776.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:16.652Z,1516736776.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:17.050Z,1516736777.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:17.449Z,1516736777.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:17.852Z,1516736777.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:18.250Z,1516736778.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:18.660Z,1516736778.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:19.051Z,1516736779.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:19.451Z,1516736779.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:19.848Z,1516736779.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:20.260Z,1516736780.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:20.649Z,1516736780.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:21.055Z,1516736781.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:21.459Z,1516736781.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:21.852Z,1516736781.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:22.257Z,1516736782.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:22.658Z,1516736782.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:23.044Z,1516736783.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:23.457Z,1516736783.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:23.862Z,1516736783.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:24.238Z,1516736784.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:24.639Z,1516736784.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:25.038Z,1516736785.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:25.442Z,1516736785.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:25.850Z,1516736785.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:26.247Z,1516736786.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:26.250Z,1516736786.250 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:46:26.250Z,1516736786.250 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:46:26.250Z,1516736786.250 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:46:26.250Z,1516736786.250 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:46:26.645Z,1516736786.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:26.649Z,1516736786.649 [Default:CheckIn:D] Stopped 2018-01-23T19:46:26.649Z,1516736786.649 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:46:27.047Z,1516736787.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:27.050Z,1516736787.050 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 988.576497 min 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn:E] Stopped 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn] Stopped 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn](INFO): Running loop #97 2018-01-23T19:46:27.051Z,1516736787.051 [Default:CheckIn] Running Loop=97 2018-01-23T19:46:27.052Z,1516736787.052 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:46:27.052Z,1516736787.052 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:46:27.446Z,1516736787.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:30.541Z,1516736790.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:30.688Z,1516736790.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:31.012Z,1516736791.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:31.406Z,1516736791.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:31.805Z,1516736791.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:32.206Z,1516736792.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:32.603Z,1516736792.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:33.005Z,1516736793.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:33.405Z,1516736793.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:33.805Z,1516736793.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:34.205Z,1516736794.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:34.605Z,1516736794.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:35.003Z,1516736795.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:35.406Z,1516736795.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:35.814Z,1516736795.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:36.204Z,1516736796.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:36.606Z,1516736796.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:37.014Z,1516736797.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:37.404Z,1516736797.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:37.808Z,1516736797.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:38.207Z,1516736798.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:38.604Z,1516736798.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:39.017Z,1516736799.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:39.444Z,1516736799.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:39.852Z,1516736799.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:40.252Z,1516736800.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:40.643Z,1516736800.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:41.055Z,1516736801.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:41.421Z,1516736801.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:41.817Z,1516736801.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:42.214Z,1516736802.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:42.613Z,1516736802.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:43.015Z,1516736803.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:43.396Z,1516736803.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:43.825Z,1516736803.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:44.246Z,1516736804.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:44.615Z,1516736804.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:45.021Z,1516736805.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:45.425Z,1516736805.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:45.858Z,1516736805.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:46.221Z,1516736806.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:46.628Z,1516736806.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:47.024Z,1516736807.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:47.436Z,1516736807.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:47.837Z,1516736807.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:48.228Z,1516736808.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:48.629Z,1516736808.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:49.035Z,1516736809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:49.438Z,1516736809.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:49.813Z,1516736809.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:50.216Z,1516736810.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:50.620Z,1516736810.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:51.029Z,1516736811.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:51.453Z,1516736811.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:51.872Z,1516736811.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:52.244Z,1516736812.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:52.631Z,1516736812.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:53.058Z,1516736813.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:53.431Z,1516736813.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:53.916Z,1516736813.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:54.234Z,1516736814.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:54.625Z,1516736814.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:55.038Z,1516736815.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:55.425Z,1516736815.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:55.819Z,1516736815.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:56.217Z,1516736816.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:56.650Z,1516736816.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:57.023Z,1516736817.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:57.455Z,1516736817.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:57.868Z,1516736817.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:58.227Z,1516736818.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:58.618Z,1516736818.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:59.025Z,1516736819.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:59.429Z,1516736819.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:46:59.833Z,1516736819.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:00.249Z,1516736820.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:00.632Z,1516736820.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:01.038Z,1516736821.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:01.447Z,1516736821.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:01.816Z,1516736821.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:02.229Z,1516736822.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:02.625Z,1516736822.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:03.032Z,1516736823.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:03.433Z,1516736823.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:03.836Z,1516736823.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:04.238Z,1516736824.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:04.640Z,1516736824.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:05.039Z,1516736825.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:05.464Z,1516736825.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:05.839Z,1516736825.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:06.246Z,1516736826.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:06.617Z,1516736826.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:07.014Z,1516736827.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:07.411Z,1516736827.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:07.811Z,1516736827.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:08.215Z,1516736828.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:08.622Z,1516736828.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:09.011Z,1516736829.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:09.410Z,1516736829.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:09.813Z,1516736829.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:10.218Z,1516736830.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:10.615Z,1516736830.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:11.011Z,1516736831.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:11.412Z,1516736831.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:11.819Z,1516736831.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:12.220Z,1516736832.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:12.614Z,1516736832.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:13.016Z,1516736833.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:13.418Z,1516736833.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:13.808Z,1516736833.808 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T19:47:13.833Z,1516736833.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:14.214Z,1516736834.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:14.617Z,1516736834.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:15.021Z,1516736835.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:15.420Z,1516736835.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:15.821Z,1516736835.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:16.214Z,1516736836.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:16.620Z,1516736836.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:16.622Z,1516736836.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:16.622Z,1516736836.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 329 2018-01-23T19:47:16.622Z,1516736836.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:47:16.634Z,1516736836.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:47:17.021Z,1516736837.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:17.033Z,1516736837.033 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:47:17.034Z,1516736837.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 329 2018-01-23T19:47:17.408Z,1516736837.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:17.409Z,1516736837.409 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:47:17.410Z,1516736837.410 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:47:17.410Z,1516736837.410 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:47:17.817Z,1516736837.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:18.223Z,1516736838.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:18.609Z,1516736838.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:19.002Z,1516736839.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:19.400Z,1516736839.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:19.832Z,1516736839.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:20.230Z,1516736840.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:20.605Z,1516736840.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:21.006Z,1516736841.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:21.428Z,1516736841.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:21.808Z,1516736841.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:22.210Z,1516736842.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:22.619Z,1516736842.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:23.018Z,1516736843.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:23.415Z,1516736843.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:23.820Z,1516736843.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:24.224Z,1516736844.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:24.621Z,1516736844.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:25.019Z,1516736845.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:25.094Z,1516736845.094 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:47:25.094Z,1516736845.094 [NAL9602] No Fault, FailCount= 5 2018-01-23T19:47:25.368Z,1516736845.368 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:47:25.428Z,1516736845.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:25.814Z,1516736845.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:26.223Z,1516736846.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:26.615Z,1516736846.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:27.012Z,1516736847.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:27.419Z,1516736847.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:27.825Z,1516736847.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:30.909Z,1516736850.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:31.056Z,1516736851.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:31.377Z,1516736851.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:31.781Z,1516736851.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:31.781Z,1516736851.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 329 2018-01-23T19:47:31.781Z,1516736851.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:47:31.783Z,1516736851.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:31.783Z,1516736851.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 329 2018-01-23T19:47:31.783Z,1516736851.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:47:31.835Z,1516736851.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:47:31.835Z,1516736851.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:47:32.188Z,1516736852.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:47:32.188Z,1516736852.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 329 2018-01-23T19:47:32.188Z,1516736852.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:47:32.188Z,1516736852.188 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 329 2018-01-23T19:47:32.592Z,1516736852.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:47:32.592Z,1516736852.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:47:32.592Z,1516736852.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:47:32.593Z,1516736852.593 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:47:32.593Z,1516736852.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:47:32.594Z,1516736852.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:47:32.981Z,1516736852.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:47:32.982Z,1516736852.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:33.384Z,1516736853.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:47:33.385Z,1516736853.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:33.784Z,1516736853.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:47:33.785Z,1516736853.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:34.179Z,1516736854.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:47:34.180Z,1516736854.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:34.576Z,1516736854.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:47:34.577Z,1516736854.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:34.985Z,1516736854.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:47:34.986Z,1516736854.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:35.380Z,1516736855.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:47:35.381Z,1516736855.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:35.792Z,1516736855.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:47:35.793Z,1516736855.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:36.196Z,1516736856.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:47:36.197Z,1516736856.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:36.536Z,1516736856.536 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:47:36.589Z,1516736856.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:47:36.590Z,1516736856.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:36.971Z,1516736856.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:47:36.972Z,1516736856.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:37.409Z,1516736857.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:47:37.410Z,1516736857.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:37.801Z,1516736857.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:47:37.802Z,1516736857.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:38.200Z,1516736858.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:47:38.201Z,1516736858.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:38.596Z,1516736858.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:47:38.597Z,1516736858.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:38.976Z,1516736858.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:47:38.977Z,1516736858.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:39.381Z,1516736859.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:47:39.382Z,1516736859.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:39.777Z,1516736859.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:47:39.778Z,1516736859.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:40.184Z,1516736860.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:47:40.185Z,1516736860.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:40.582Z,1516736860.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:47:40.583Z,1516736860.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:40.987Z,1516736860.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:47:40.988Z,1516736860.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:41.385Z,1516736861.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:47:41.386Z,1516736861.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:41.775Z,1516736861.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:47:41.776Z,1516736861.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:42.178Z,1516736862.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:47:42.183Z,1516736862.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:42.582Z,1516736862.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:47:42.587Z,1516736862.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:42.977Z,1516736862.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:47:42.978Z,1516736862.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:43.390Z,1516736863.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:47:43.395Z,1516736863.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:43.790Z,1516736863.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:47:43.791Z,1516736863.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:44.185Z,1516736864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:47:44.186Z,1516736864.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:44.584Z,1516736864.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:47:44.585Z,1516736864.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:44.989Z,1516736864.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:47:44.990Z,1516736864.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:45.383Z,1516736865.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:47:45.384Z,1516736865.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:45.784Z,1516736865.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:47:45.785Z,1516736865.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:46.198Z,1516736866.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:47:46.199Z,1516736866.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:46.590Z,1516736866.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:47:46.592Z,1516736866.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:46.993Z,1516736866.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:47:46.994Z,1516736866.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:47.379Z,1516736867.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:47:47.380Z,1516736867.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:47.783Z,1516736867.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:47:47.784Z,1516736867.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:48.184Z,1516736868.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:47:48.185Z,1516736868.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:48.580Z,1516736868.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:47:48.581Z,1516736868.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:48.983Z,1516736868.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:47:48.984Z,1516736868.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:49.391Z,1516736869.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:47:49.392Z,1516736869.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:49.794Z,1516736869.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:47:49.795Z,1516736869.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:50.195Z,1516736870.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:47:50.196Z,1516736870.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:50.588Z,1516736870.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:47:50.589Z,1516736870.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:50.992Z,1516736870.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:47:50.993Z,1516736870.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:51.368Z,1516736871.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:47:51.369Z,1516736871.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:51.772Z,1516736871.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:47:51.773Z,1516736871.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:52.199Z,1516736872.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:52.604Z,1516736872.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:53.009Z,1516736873.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:53.381Z,1516736873.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:53.774Z,1516736873.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:54.177Z,1516736874.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:54.582Z,1516736874.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:54.979Z,1516736874.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:55.379Z,1516736875.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:55.782Z,1516736875.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:56.178Z,1516736876.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:56.579Z,1516736876.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:56.975Z,1516736876.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:57.375Z,1516736877.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:57.785Z,1516736877.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:58.190Z,1516736878.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:58.586Z,1516736878.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:58.982Z,1516736878.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:59.376Z,1516736879.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:47:59.776Z,1516736879.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:00.185Z,1516736880.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:00.580Z,1516736880.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:00.976Z,1516736880.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:01.393Z,1516736881.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:01.786Z,1516736881.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:02.189Z,1516736882.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:02.578Z,1516736882.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:02.983Z,1516736882.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:03.377Z,1516736883.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:03.779Z,1516736883.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:04.191Z,1516736884.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:04.590Z,1516736884.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:04.988Z,1516736884.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:05.380Z,1516736885.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:05.778Z,1516736885.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:06.184Z,1516736886.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:06.579Z,1516736886.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:06.984Z,1516736886.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:07.390Z,1516736887.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:07.790Z,1516736887.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:08.190Z,1516736888.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:08.585Z,1516736888.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:08.980Z,1516736888.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:09.384Z,1516736889.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:09.796Z,1516736889.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:10.197Z,1516736890.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:10.593Z,1516736890.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:10.998Z,1516736890.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:11.374Z,1516736891.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:11.775Z,1516736891.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:12.201Z,1516736892.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:12.578Z,1516736892.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:12.975Z,1516736892.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:13.382Z,1516736893.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:13.783Z,1516736893.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:14.178Z,1516736894.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:14.585Z,1516736894.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:14.978Z,1516736894.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:15.376Z,1516736895.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:15.777Z,1516736895.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:16.179Z,1516736896.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:16.581Z,1516736896.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:16.984Z,1516736896.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:17.378Z,1516736897.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:17.776Z,1516736897.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:18.184Z,1516736898.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:18.585Z,1516736898.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:18.976Z,1516736898.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:19.388Z,1516736899.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:19.787Z,1516736899.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:20.189Z,1516736900.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:20.580Z,1516736900.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:20.981Z,1516736900.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:21.377Z,1516736901.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:21.783Z,1516736901.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:22.182Z,1516736902.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:22.581Z,1516736902.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:22.982Z,1516736902.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:23.379Z,1516736903.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:23.776Z,1516736903.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:24.184Z,1516736904.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:24.581Z,1516736904.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:24.976Z,1516736904.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:25.382Z,1516736905.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:25.782Z,1516736905.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:26.181Z,1516736906.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:26.576Z,1516736906.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:26.981Z,1516736906.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:27.378Z,1516736907.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:27.784Z,1516736907.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:28.184Z,1516736908.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:31.279Z,1516736911.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:31.441Z,1516736911.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:31.743Z,1516736911.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:32.143Z,1516736912.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:32.544Z,1516736912.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:32.943Z,1516736912.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:33.351Z,1516736913.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:33.776Z,1516736913.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:34.146Z,1516736914.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:34.549Z,1516736914.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:34.940Z,1516736914.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:35.342Z,1516736915.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:35.743Z,1516736915.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:36.146Z,1516736916.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:36.551Z,1516736916.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:36.946Z,1516736916.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:37.345Z,1516736917.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:37.749Z,1516736917.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:38.151Z,1516736918.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:38.553Z,1516736918.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:38.953Z,1516736918.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:39.345Z,1516736919.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:39.742Z,1516736919.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:40.153Z,1516736920.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:40.554Z,1516736920.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:40.960Z,1516736920.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:41.349Z,1516736921.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:41.744Z,1516736921.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:42.158Z,1516736922.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:42.565Z,1516736922.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:42.964Z,1516736922.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:43.353Z,1516736923.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:43.757Z,1516736923.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:44.160Z,1516736924.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:44.558Z,1516736924.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:44.966Z,1516736924.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:45.358Z,1516736925.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:45.734Z,1516736925.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:46.158Z,1516736926.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:46.569Z,1516736926.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:46.969Z,1516736926.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:47.361Z,1516736927.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:47.766Z,1516736927.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:48.169Z,1516736928.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:48.568Z,1516736928.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:48.963Z,1516736928.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:49.356Z,1516736929.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:49.763Z,1516736929.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:50.168Z,1516736930.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:50.562Z,1516736930.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:50.977Z,1516736930.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:51.345Z,1516736931.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:51.745Z,1516736931.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:52.153Z,1516736932.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:52.582Z,1516736932.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:52.949Z,1516736932.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:53.343Z,1516736933.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:53.744Z,1516736933.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:54.144Z,1516736934.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:54.546Z,1516736934.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:54.950Z,1516736934.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:55.377Z,1516736935.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:55.742Z,1516736935.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:56.143Z,1516736936.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:56.552Z,1516736936.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:56.944Z,1516736936.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:57.346Z,1516736937.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:57.776Z,1516736937.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:58.146Z,1516736938.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:58.549Z,1516736938.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:58.941Z,1516736938.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:59.344Z,1516736939.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:48:59.749Z,1516736939.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:00.141Z,1516736940.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:00.577Z,1516736940.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:00.950Z,1516736940.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:01.376Z,1516736941.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:01.742Z,1516736941.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:02.149Z,1516736942.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:02.549Z,1516736942.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:02.945Z,1516736942.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:03.354Z,1516736943.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:03.755Z,1516736943.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:04.153Z,1516736944.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:04.544Z,1516736944.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:04.942Z,1516736944.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:05.352Z,1516736945.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:05.746Z,1516736945.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:06.144Z,1516736946.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:06.565Z,1516736946.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:06.964Z,1516736946.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:07.365Z,1516736947.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:07.746Z,1516736947.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:08.150Z,1516736948.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:08.546Z,1516736948.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:08.945Z,1516736948.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:09.362Z,1516736949.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:09.754Z,1516736949.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:10.154Z,1516736950.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:10.553Z,1516736950.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:10.945Z,1516736950.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:11.345Z,1516736951.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:11.765Z,1516736951.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:12.145Z,1516736952.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:12.564Z,1516736952.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:12.961Z,1516736952.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:13.354Z,1516736953.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:13.749Z,1516736953.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:14.150Z,1516736954.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:14.552Z,1516736954.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:14.952Z,1516736954.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:15.369Z,1516736955.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:15.769Z,1516736955.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:16.165Z,1516736956.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:16.550Z,1516736956.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:16.954Z,1516736956.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:17.352Z,1516736957.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:17.750Z,1516736957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:18.152Z,1516736958.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:18.555Z,1516736958.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:18.966Z,1516736958.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:19.365Z,1516736959.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:19.753Z,1516736959.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:20.144Z,1516736960.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:20.549Z,1516736960.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:20.957Z,1516736960.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:21.362Z,1516736961.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:21.777Z,1516736961.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:22.173Z,1516736962.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:22.571Z,1516736962.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:22.965Z,1516736962.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:23.340Z,1516736963.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:23.741Z,1516736963.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:24.153Z,1516736964.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:24.577Z,1516736964.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:24.951Z,1516736964.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:25.347Z,1516736965.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:25.743Z,1516736965.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:26.146Z,1516736966.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:26.556Z,1516736966.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:26.943Z,1516736966.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:27.358Z,1516736967.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:27.753Z,1516736967.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:28.154Z,1516736968.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:28.545Z,1516736968.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:31.648Z,1516736971.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:31.788Z,1516736971.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:32.139Z,1516736972.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:32.540Z,1516736972.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:32.933Z,1516736972.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:33.337Z,1516736973.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:33.737Z,1516736973.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:34.135Z,1516736974.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:34.538Z,1516736974.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:34.942Z,1516736974.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:35.341Z,1516736975.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:35.735Z,1516736975.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:36.138Z,1516736976.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:36.532Z,1516736976.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:36.939Z,1516736976.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:37.342Z,1516736977.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:37.737Z,1516736977.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:38.145Z,1516736978.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:38.511Z,1516736978.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:38.917Z,1516736978.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:39.317Z,1516736979.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:39.716Z,1516736979.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:40.115Z,1516736980.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:40.522Z,1516736980.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:40.921Z,1516736980.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:41.345Z,1516736981.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:41.721Z,1516736981.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:42.117Z,1516736982.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:42.515Z,1516736982.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:42.920Z,1516736982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:43.346Z,1516736983.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:43.796Z,1516736983.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:44.119Z,1516736984.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:44.516Z,1516736984.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:44.916Z,1516736984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:45.316Z,1516736985.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:45.725Z,1516736985.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:46.115Z,1516736986.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:46.525Z,1516736986.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:46.926Z,1516736986.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:47.322Z,1516736987.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:47.715Z,1516736987.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:48.124Z,1516736988.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:48.520Z,1516736988.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:48.916Z,1516736988.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:49.330Z,1516736989.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:49.731Z,1516736989.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:50.126Z,1516736990.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:50.523Z,1516736990.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:50.927Z,1516736990.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:51.327Z,1516736991.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:51.730Z,1516736991.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:52.127Z,1516736992.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:52.526Z,1516736992.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:52.945Z,1516736992.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:53.333Z,1516736993.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:53.727Z,1516736993.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:54.130Z,1516736994.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:54.527Z,1516736994.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:54.927Z,1516736994.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:55.339Z,1516736995.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:55.730Z,1516736995.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:56.135Z,1516736996.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:56.537Z,1516736996.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:56.927Z,1516736996.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:57.329Z,1516736997.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:57.730Z,1516736997.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:58.127Z,1516736998.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:58.538Z,1516736998.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:58.935Z,1516736998.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:59.331Z,1516736999.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:49:59.730Z,1516736999.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:00.124Z,1516737000.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:00.509Z,1516737000.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:00.913Z,1516737000.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:01.339Z,1516737001.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:01.737Z,1516737001.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:02.149Z,1516737002.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:02.516Z,1516737002.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:02.921Z,1516737002.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:03.325Z,1516737003.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:03.717Z,1516737003.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:04.114Z,1516737004.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:04.518Z,1516737004.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:04.921Z,1516737004.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:05.318Z,1516737005.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:05.714Z,1516737005.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:06.120Z,1516737006.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:06.529Z,1516737006.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:06.929Z,1516737006.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:07.330Z,1516737007.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:07.722Z,1516737007.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:08.134Z,1516737008.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:08.521Z,1516737008.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:08.920Z,1516737008.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:09.317Z,1516737009.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:09.730Z,1516737009.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:10.116Z,1516737010.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:10.527Z,1516737010.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:10.925Z,1516737010.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:11.327Z,1516737011.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:11.720Z,1516737011.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:12.115Z,1516737012.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:12.517Z,1516737012.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:12.929Z,1516737012.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:13.325Z,1516737013.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:13.729Z,1516737013.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:14.129Z,1516737014.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:14.518Z,1516737014.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:14.929Z,1516737014.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:15.326Z,1516737015.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:15.732Z,1516737015.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:16.129Z,1516737016.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:16.522Z,1516737016.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:16.916Z,1516737016.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:17.326Z,1516737017.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:17.729Z,1516737017.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:17.731Z,1516737017.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:17.731Z,1516737017.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 330 2018-01-23T19:50:17.731Z,1516737017.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:50:17.763Z,1516737017.763 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:50:18.129Z,1516737018.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:18.141Z,1516737018.141 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:50:18.141Z,1516737018.141 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 330 2018-01-23T19:50:18.522Z,1516737018.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:18.524Z,1516737018.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:50:18.524Z,1516737018.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:50:18.524Z,1516737018.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:50:18.924Z,1516737018.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:19.334Z,1516737019.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:19.733Z,1516737019.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:20.133Z,1516737020.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:20.521Z,1516737020.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:20.921Z,1516737020.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:21.329Z,1516737021.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:21.733Z,1516737021.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:22.137Z,1516737022.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:22.523Z,1516737022.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:22.921Z,1516737022.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:23.333Z,1516737023.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:23.737Z,1516737023.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:24.131Z,1516737024.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:24.525Z,1516737024.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:24.929Z,1516737024.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:25.334Z,1516737025.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:25.734Z,1516737025.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:26.133Z,1516737026.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:26.542Z,1516737026.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:26.925Z,1516737026.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:27.333Z,1516737027.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:27.730Z,1516737027.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:28.129Z,1516737028.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:28.524Z,1516737028.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:28.924Z,1516737028.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.037Z,1516737032.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.181Z,1516737032.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.546Z,1516737032.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.936Z,1516737032.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.936Z,1516737032.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 330 2018-01-23T19:50:32.936Z,1516737032.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:50:32.938Z,1516737032.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:32.938Z,1516737032.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 330 2018-01-23T19:50:32.938Z,1516737032.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:50:32.952Z,1516737032.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:50:32.952Z,1516737032.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:50:33.351Z,1516737033.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:50:33.351Z,1516737033.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 330 2018-01-23T19:50:33.351Z,1516737033.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:50:33.351Z,1516737033.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 330 2018-01-23T19:50:33.741Z,1516737033.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:50:33.742Z,1516737033.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:50:33.742Z,1516737033.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:50:33.742Z,1516737033.742 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:50:33.743Z,1516737033.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:50:33.743Z,1516737033.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:50:34.139Z,1516737034.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:50:34.140Z,1516737034.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:34.545Z,1516737034.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:50:34.546Z,1516737034.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:34.949Z,1516737034.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:50:34.950Z,1516737034.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:35.344Z,1516737035.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:50:35.345Z,1516737035.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:35.737Z,1516737035.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:50:35.737Z,1516737035.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:36.133Z,1516737036.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:50:36.134Z,1516737036.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:36.535Z,1516737036.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:50:36.536Z,1516737036.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:36.937Z,1516737036.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:50:36.937Z,1516737036.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:37.339Z,1516737037.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:50:37.340Z,1516737037.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:37.753Z,1516737037.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:50:37.754Z,1516737037.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:38.153Z,1516737038.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:50:38.154Z,1516737038.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:38.544Z,1516737038.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:50:38.545Z,1516737038.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:38.940Z,1516737038.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:50:38.941Z,1516737038.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:39.340Z,1516737039.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:50:39.341Z,1516737039.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:39.748Z,1516737039.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:50:39.749Z,1516737039.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:40.153Z,1516737040.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:50:40.154Z,1516737040.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:40.534Z,1516737040.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:50:40.535Z,1516737040.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:40.944Z,1516737040.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:50:40.945Z,1516737040.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:41.345Z,1516737041.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:50:41.346Z,1516737041.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:41.745Z,1516737041.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:50:41.746Z,1516737041.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:42.143Z,1516737042.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:50:42.144Z,1516737042.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:42.540Z,1516737042.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:50:42.541Z,1516737042.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:42.937Z,1516737042.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T19:50:42.938Z,1516737042.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:43.346Z,1516737043.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T19:50:43.348Z,1516737043.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:43.744Z,1516737043.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T19:50:43.745Z,1516737043.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:44.144Z,1516737044.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T19:50:44.145Z,1516737044.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:44.535Z,1516737044.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T19:50:44.536Z,1516737044.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:44.948Z,1516737044.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T19:50:44.949Z,1516737044.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:45.338Z,1516737045.338 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T19:50:45.380Z,1516737045.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T19:50:45.381Z,1516737045.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:45.749Z,1516737045.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:50:45.750Z,1516737045.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:46.145Z,1516737046.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:50:46.146Z,1516737046.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:46.549Z,1516737046.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:50:46.550Z,1516737046.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:46.928Z,1516737046.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x29196 got:0x17263 2018-01-23T19:50:46.944Z,1516737046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:50:46.945Z,1516737046.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:47.345Z,1516737047.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:50:47.346Z,1516737047.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:47.745Z,1516737047.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:50:47.746Z,1516737047.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:48.142Z,1516737048.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:50:48.143Z,1516737048.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:48.549Z,1516737048.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:50:48.550Z,1516737048.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:48.922Z,1516737048.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x37193 got:0x28018 2018-01-23T19:50:48.941Z,1516737048.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:50:48.942Z,1516737048.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:49.344Z,1516737049.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:50:49.345Z,1516737049.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:49.746Z,1516737049.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:50:49.748Z,1516737049.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:50.142Z,1516737050.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:50:50.143Z,1516737050.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:50.549Z,1516737050.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:50:50.550Z,1516737050.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:50.936Z,1516737050.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:50:50.937Z,1516737050.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:51.345Z,1516737051.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:50:51.346Z,1516737051.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:51.745Z,1516737051.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:50:51.746Z,1516737051.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:52.141Z,1516737052.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:50:52.142Z,1516737052.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:52.532Z,1516737052.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:50:52.533Z,1516737052.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:52.950Z,1516737052.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:53.334Z,1516737053.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:53.742Z,1516737053.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:54.145Z,1516737054.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:54.561Z,1516737054.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:54.936Z,1516737054.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:55.341Z,1516737055.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:55.733Z,1516737055.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:56.148Z,1516737056.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:56.546Z,1516737056.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:56.943Z,1516737056.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:57.342Z,1516737057.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:57.743Z,1516737057.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:58.130Z,1516737058.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:58.538Z,1516737058.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:58.945Z,1516737058.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:59.353Z,1516737059.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:50:59.746Z,1516737059.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:00.146Z,1516737060.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:00.553Z,1516737060.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:00.953Z,1516737060.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:01.338Z,1516737061.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:01.738Z,1516737061.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:02.137Z,1516737062.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:02.544Z,1516737062.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:02.955Z,1516737062.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:03.343Z,1516737063.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:03.745Z,1516737063.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:04.139Z,1516737064.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:04.540Z,1516737064.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:04.945Z,1516737064.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:05.342Z,1516737065.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:05.748Z,1516737065.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:06.151Z,1516737066.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:06.545Z,1516737066.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:06.933Z,1516737066.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:07.320Z,1516737067.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:07.737Z,1516737067.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:08.138Z,1516737068.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:08.544Z,1516737068.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:08.977Z,1516737068.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:09.338Z,1516737069.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:09.736Z,1516737069.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:10.140Z,1516737070.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:10.533Z,1516737070.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:10.940Z,1516737070.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:11.333Z,1516737071.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:11.742Z,1516737071.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:12.149Z,1516737072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:12.538Z,1516737072.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:12.933Z,1516737072.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:13.331Z,1516737073.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:13.735Z,1516737073.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:14.133Z,1516737074.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:14.548Z,1516737074.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:14.942Z,1516737074.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:15.338Z,1516737075.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:15.736Z,1516737075.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:16.133Z,1516737076.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:16.544Z,1516737076.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:16.932Z,1516737076.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:17.330Z,1516737077.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:17.756Z,1516737077.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:18.144Z,1516737078.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:18.541Z,1516737078.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:18.938Z,1516737078.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:19.341Z,1516737079.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:19.736Z,1516737079.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:20.130Z,1516737080.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:20.545Z,1516737080.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:20.942Z,1516737080.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:21.345Z,1516737081.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:21.732Z,1516737081.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:22.133Z,1516737082.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:22.529Z,1516737082.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:22.940Z,1516737082.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:23.333Z,1516737083.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:23.738Z,1516737083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:24.149Z,1516737084.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:24.549Z,1516737084.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:24.933Z,1516737084.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:25.333Z,1516737085.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:25.737Z,1516737085.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:26.135Z,1516737086.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:26.543Z,1516737086.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:26.942Z,1516737086.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:27.349Z,1516737087.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:27.353Z,1516737087.353 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:46:27.1Z 2018-01-23T19:51:27.353Z,1516737087.353 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T19:51:27.353Z,1516737087.353 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T19:51:27.736Z,1516737087.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:28.259Z,1516737088.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:28.541Z,1516737088.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:31.640Z,1516737091.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:31.718Z,1516737091.718 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0388.lzma 2018-01-23T19:51:31.792Z,1516737091.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:32.141Z,1516737092.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:32.478Z,1516737092.478 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0388.lzma.bak 2018-01-23T19:51:32.478Z,1516737092.478 [DataOverHttps](INFO): SBD MOMSN=7756546 2018-01-23T19:51:32.554Z,1516737092.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:33.183Z,1516737093.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:33.337Z,1516737093.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:36.412Z,1516737096.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:36.529Z,1516737096.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:36.932Z,1516737096.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:37.336Z,1516737097.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:37.732Z,1516737097.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:38.102Z,1516737098.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:41.208Z,1516737101.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:41.283Z,1516737101.283 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0389.lzma 2018-01-23T19:51:41.350Z,1516737101.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:41.710Z,1516737101.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:42.062Z,1516737102.062 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0389.lzma.bak 2018-01-23T19:51:42.062Z,1516737102.062 [DataOverHttps](INFO): SBD MOMSN=7756549 2018-01-23T19:51:42.138Z,1516737102.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:42.764Z,1516737102.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:42.767Z,1516737102.767 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T19:51:42.767Z,1516737102.767 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T19:51:42.767Z,1516737102.767 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T19:51:42.921Z,1516737102.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:46.052Z,1516737106.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:46.189Z,1516737106.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:46.529Z,1516737106.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:46.957Z,1516737106.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:47.325Z,1516737107.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:47.721Z,1516737107.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:48.121Z,1516737108.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:48.513Z,1516737108.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:48.916Z,1516737108.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:49.329Z,1516737109.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:49.726Z,1516737109.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:50.187Z,1516737110.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:50.526Z,1516737110.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:50.921Z,1516737110.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:51.309Z,1516737111.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:51.717Z,1516737111.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:52.164Z,1516737112.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:52.537Z,1516737112.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:52.939Z,1516737112.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:53.335Z,1516737113.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:53.727Z,1516737113.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:54.124Z,1516737114.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:54.531Z,1516737114.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:54.928Z,1516737114.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:55.338Z,1516737115.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:55.741Z,1516737115.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:56.140Z,1516737116.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:56.539Z,1516737116.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:56.916Z,1516737116.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:57.313Z,1516737117.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:57.714Z,1516737117.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:58.117Z,1516737118.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:58.540Z,1516737118.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:58.935Z,1516737118.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:59.319Z,1516737119.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:51:59.714Z,1516737119.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:00.120Z,1516737120.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:00.514Z,1516737120.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:00.920Z,1516737120.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:01.316Z,1516737121.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:01.725Z,1516737121.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:02.129Z,1516737122.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:02.525Z,1516737122.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:02.917Z,1516737122.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:03.317Z,1516737123.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:03.758Z,1516737123.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:04.117Z,1516737124.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:04.533Z,1516737124.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:04.929Z,1516737124.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:05.329Z,1516737125.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:05.718Z,1516737125.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:06.124Z,1516737126.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:06.518Z,1516737126.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:06.919Z,1516737126.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:07.329Z,1516737127.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:07.726Z,1516737127.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:08.133Z,1516737128.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:08.527Z,1516737128.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:08.918Z,1516737128.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:09.317Z,1516737129.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:09.720Z,1516737129.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:10.125Z,1516737130.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:10.533Z,1516737130.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:10.929Z,1516737130.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:11.325Z,1516737131.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:11.718Z,1516737131.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:12.120Z,1516737132.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:12.517Z,1516737132.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:12.917Z,1516737132.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:13.320Z,1516737133.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:13.737Z,1516737133.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:14.137Z,1516737134.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:14.531Z,1516737134.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:14.923Z,1516737134.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:15.317Z,1516737135.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:15.728Z,1516737135.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:16.124Z,1516737136.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:16.534Z,1516737136.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:16.934Z,1516737136.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:17.337Z,1516737137.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:17.721Z,1516737137.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:18.132Z,1516737138.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:18.527Z,1516737138.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:18.930Z,1516737138.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:19.335Z,1516737139.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:19.728Z,1516737139.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:20.120Z,1516737140.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:20.532Z,1516737140.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:20.937Z,1516737140.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:21.330Z,1516737141.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:21.720Z,1516737141.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:22.125Z,1516737142.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:22.526Z,1516737142.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:22.930Z,1516737142.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:23.326Z,1516737143.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:23.723Z,1516737143.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:24.128Z,1516737144.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:24.529Z,1516737144.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:24.929Z,1516737144.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:25.326Z,1516737145.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:25.718Z,1516737145.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:26.125Z,1516737146.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:26.528Z,1516737146.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:26.929Z,1516737146.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:27.326Z,1516737147.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:27.729Z,1516737147.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:28.129Z,1516737148.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:28.530Z,1516737148.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:28.930Z,1516737148.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:29.326Z,1516737149.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:29.723Z,1516737149.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:30.128Z,1516737150.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:30.530Z,1516737150.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:30.930Z,1516737150.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:31.326Z,1516737151.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:31.723Z,1516737151.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:32.124Z,1516737152.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:32.536Z,1516737152.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:32.930Z,1516737152.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:33.326Z,1516737153.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:33.732Z,1516737153.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:34.124Z,1516737154.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:34.534Z,1516737154.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:34.936Z,1516737154.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:35.331Z,1516737155.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:35.728Z,1516737155.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:36.132Z,1516737156.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:36.536Z,1516737156.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:36.935Z,1516737156.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:37.328Z,1516737157.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:37.718Z,1516737157.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:38.121Z,1516737158.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:38.537Z,1516737158.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:38.928Z,1516737158.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:39.326Z,1516737159.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:39.728Z,1516737159.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:40.121Z,1516737160.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:40.527Z,1516737160.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:40.936Z,1516737160.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:41.330Z,1516737161.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:41.724Z,1516737161.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:42.123Z,1516737162.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:42.529Z,1516737162.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:42.930Z,1516737162.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:43.330Z,1516737163.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:46.425Z,1516737166.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:46.564Z,1516737166.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:46.898Z,1516737166.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:47.314Z,1516737167.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:47.694Z,1516737167.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:48.090Z,1516737168.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:48.491Z,1516737168.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:48.892Z,1516737168.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:49.293Z,1516737169.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:49.702Z,1516737169.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:50.101Z,1516737170.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:50.502Z,1516737170.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:50.892Z,1516737170.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:51.290Z,1516737171.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:51.693Z,1516737171.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:52.093Z,1516737172.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:52.492Z,1516737172.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:52.902Z,1516737172.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:53.301Z,1516737173.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:53.703Z,1516737173.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:54.092Z,1516737174.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:54.492Z,1516737174.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:54.895Z,1516737174.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:55.299Z,1516737175.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:55.703Z,1516737175.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:56.113Z,1516737176.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:56.501Z,1516737176.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:56.896Z,1516737176.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:57.293Z,1516737177.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:57.701Z,1516737177.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:58.096Z,1516737178.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:58.493Z,1516737178.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:58.901Z,1516737178.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:59.312Z,1516737179.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:52:59.709Z,1516737179.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:00.093Z,1516737180.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:00.492Z,1516737180.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:00.894Z,1516737180.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:01.306Z,1516737181.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:01.706Z,1516737181.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:02.110Z,1516737182.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:02.513Z,1516737182.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:02.903Z,1516737182.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:03.297Z,1516737183.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:03.699Z,1516737183.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:04.101Z,1516737184.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:04.499Z,1516737184.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:04.902Z,1516737184.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:05.306Z,1516737185.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:05.702Z,1516737185.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:06.099Z,1516737186.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:06.501Z,1516737186.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:06.899Z,1516737186.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:07.299Z,1516737187.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:07.706Z,1516737187.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:08.110Z,1516737188.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:08.502Z,1516737188.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:08.901Z,1516737188.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:09.301Z,1516737189.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:09.699Z,1516737189.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:10.102Z,1516737190.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:10.500Z,1516737190.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:10.902Z,1516737190.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:11.307Z,1516737191.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:11.703Z,1516737191.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:12.100Z,1516737192.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:12.507Z,1516737192.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:12.899Z,1516737192.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:13.309Z,1516737193.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:13.708Z,1516737193.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:14.112Z,1516737194.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:14.509Z,1516737194.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:14.904Z,1516737194.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:15.298Z,1516737195.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:15.701Z,1516737195.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:16.107Z,1516737196.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:16.481Z,1516737196.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:16.905Z,1516737196.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:17.317Z,1516737197.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:17.713Z,1516737197.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:18.105Z,1516737198.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:18.487Z,1516737198.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:18.888Z,1516737198.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:18.890Z,1516737198.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:18.890Z,1516737198.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 331 2018-01-23T19:53:18.890Z,1516737198.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:53:18.927Z,1516737198.927 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:53:19.320Z,1516737199.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:19.333Z,1516737199.333 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:53:19.334Z,1516737199.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 331 2018-01-23T19:53:19.717Z,1516737199.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:19.718Z,1516737199.718 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:53:19.719Z,1516737199.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:53:19.719Z,1516737199.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:53:20.098Z,1516737200.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:20.502Z,1516737200.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:20.892Z,1516737200.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:21.302Z,1516737201.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:21.693Z,1516737201.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:22.092Z,1516737202.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:22.493Z,1516737202.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:22.927Z,1516737202.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:23.304Z,1516737203.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:23.723Z,1516737203.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:24.096Z,1516737204.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:24.492Z,1516737204.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:24.892Z,1516737204.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:25.290Z,1516737205.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:25.698Z,1516737205.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:26.098Z,1516737206.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:26.501Z,1516737206.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:26.892Z,1516737206.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:27.291Z,1516737207.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:27.691Z,1516737207.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:28.093Z,1516737208.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:28.490Z,1516737208.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:28.901Z,1516737208.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:29.301Z,1516737209.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:29.698Z,1516737209.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:30.097Z,1516737210.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:30.493Z,1516737210.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:30.896Z,1516737210.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:31.292Z,1516737211.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:31.699Z,1516737211.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:32.105Z,1516737212.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:32.501Z,1516737212.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:32.894Z,1516737212.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:33.297Z,1516737213.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:33.697Z,1516737213.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:34.093Z,1516737214.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:34.093Z,1516737214.093 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 331 2018-01-23T19:53:34.093Z,1516737214.093 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:53:34.095Z,1516737214.095 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:34.095Z,1516737214.095 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 331 2018-01-23T19:53:34.095Z,1516737214.095 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:53:34.107Z,1516737214.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:53:34.108Z,1516737214.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:53:34.514Z,1516737214.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:53:34.514Z,1516737214.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 331 2018-01-23T19:53:34.519Z,1516737214.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:53:34.519Z,1516737214.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 331 2018-01-23T19:53:34.908Z,1516737214.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:53:34.908Z,1516737214.908 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:53:34.909Z,1516737214.909 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:53:34.909Z,1516737214.909 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:53:34.909Z,1516737214.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:53:34.910Z,1516737214.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:53:35.306Z,1516737215.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:53:35.307Z,1516737215.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:35.701Z,1516737215.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:53:35.702Z,1516737215.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:36.092Z,1516737216.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:53:36.093Z,1516737216.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:36.503Z,1516737216.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:53:36.504Z,1516737216.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:36.895Z,1516737216.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:53:36.896Z,1516737216.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:37.298Z,1516737217.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:53:37.300Z,1516737217.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:37.706Z,1516737217.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:53:37.707Z,1516737217.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:38.102Z,1516737218.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:53:38.103Z,1516737218.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:38.505Z,1516737218.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:53:38.506Z,1516737218.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:38.903Z,1516737218.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:53:38.904Z,1516737218.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:39.296Z,1516737219.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:53:39.297Z,1516737219.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:39.699Z,1516737219.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:53:39.700Z,1516737219.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:40.103Z,1516737220.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:53:40.104Z,1516737220.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:40.500Z,1516737220.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:53:40.501Z,1516737220.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:40.912Z,1516737220.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:53:40.913Z,1516737220.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:41.306Z,1516737221.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:53:41.307Z,1516737221.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:41.701Z,1516737221.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:53:41.702Z,1516737221.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:42.101Z,1516737222.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:53:42.102Z,1516737222.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:42.495Z,1516737222.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:53:42.496Z,1516737222.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:42.897Z,1516737222.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:53:42.898Z,1516737222.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:43.296Z,1516737223.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:53:43.297Z,1516737223.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:43.706Z,1516737223.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:53:43.707Z,1516737223.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:46.805Z,1516737226.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s. 2018-01-23T19:53:46.806Z,1516737226.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:46.952Z,1516737226.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T19:53:46.953Z,1516737226.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:47.275Z,1516737227.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:53:47.276Z,1516737227.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:47.673Z,1516737227.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:53:47.674Z,1516737227.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:48.073Z,1516737228.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:53:48.074Z,1516737228.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:48.476Z,1516737228.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:53:48.477Z,1516737228.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:48.877Z,1516737228.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:53:48.878Z,1516737228.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:49.285Z,1516737229.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:53:49.286Z,1516737229.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:49.677Z,1516737229.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:53:49.678Z,1516737229.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:50.073Z,1516737230.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:53:50.074Z,1516737230.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:50.470Z,1516737230.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:53:50.472Z,1516737230.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:50.877Z,1516737230.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:53:50.878Z,1516737230.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:51.272Z,1516737231.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:53:51.273Z,1516737231.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:51.684Z,1516737231.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:53:51.685Z,1516737231.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:52.082Z,1516737232.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:53:52.083Z,1516737232.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:52.482Z,1516737232.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:53:52.483Z,1516737232.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:52.870Z,1516737232.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:53:52.871Z,1516737232.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:53.270Z,1516737233.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:53:53.271Z,1516737233.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:53.672Z,1516737233.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:53:53.672Z,1516737233.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:54.076Z,1516737234.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:53:54.077Z,1516737234.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:54.470Z,1516737234.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:54.881Z,1516737234.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:55.285Z,1516737235.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:55.682Z,1516737235.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:56.073Z,1516737236.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:56.480Z,1516737236.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:56.874Z,1516737236.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:57.280Z,1516737237.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:57.677Z,1516737237.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:58.086Z,1516737238.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:58.483Z,1516737238.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:58.878Z,1516737238.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:59.285Z,1516737239.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:53:59.686Z,1516737239.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:00.089Z,1516737240.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:00.485Z,1516737240.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:00.880Z,1516737240.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:01.281Z,1516737241.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:01.675Z,1516737241.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:02.082Z,1516737242.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:02.472Z,1516737242.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:02.881Z,1516737242.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:03.292Z,1516737243.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:03.681Z,1516737243.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:04.079Z,1516737244.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:04.473Z,1516737244.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:04.874Z,1516737244.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:05.278Z,1516737245.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:05.690Z,1516737245.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:06.086Z,1516737246.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:06.487Z,1516737246.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:06.885Z,1516737246.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:07.286Z,1516737247.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:07.697Z,1516737247.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:08.090Z,1516737248.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:08.486Z,1516737248.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:08.886Z,1516737248.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:09.288Z,1516737249.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:09.685Z,1516737249.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:10.089Z,1516737250.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:10.489Z,1516737250.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:10.882Z,1516737250.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:11.281Z,1516737251.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:11.696Z,1516737251.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:12.085Z,1516737252.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:12.494Z,1516737252.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:12.892Z,1516737252.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:13.289Z,1516737253.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:13.692Z,1516737253.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:14.093Z,1516737254.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:14.488Z,1516737254.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:14.867Z,1516737254.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:15.273Z,1516737255.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:15.694Z,1516737255.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:16.097Z,1516737256.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:16.504Z,1516737256.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:16.874Z,1516737256.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:17.275Z,1516737257.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:17.686Z,1516737257.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:18.115Z,1516737258.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:18.514Z,1516737258.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:18.875Z,1516737258.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:19.286Z,1516737259.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:19.692Z,1516737259.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:20.087Z,1516737260.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:20.488Z,1516737260.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:20.890Z,1516737260.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:21.282Z,1516737261.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:21.691Z,1516737261.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:22.085Z,1516737262.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:22.489Z,1516737262.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:22.880Z,1516737262.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:23.278Z,1516737263.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:23.688Z,1516737263.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:24.082Z,1516737264.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:24.484Z,1516737264.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:24.884Z,1516737264.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:25.279Z,1516737265.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:25.685Z,1516737265.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:26.089Z,1516737266.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:26.515Z,1516737266.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:26.878Z,1516737266.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:27.284Z,1516737267.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:27.695Z,1516737267.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:28.101Z,1516737268.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:28.510Z,1516737268.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:28.888Z,1516737268.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:29.289Z,1516737269.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:29.695Z,1516737269.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:30.122Z,1516737270.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:30.495Z,1516737270.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:30.893Z,1516737270.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:31.289Z,1516737271.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:31.686Z,1516737271.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:32.100Z,1516737272.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:32.501Z,1516737272.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:32.882Z,1516737272.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:33.285Z,1516737273.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:33.691Z,1516737273.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:34.093Z,1516737274.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:34.478Z,1516737274.478 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T19:54:34.497Z,1516737274.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:34.888Z,1516737274.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:35.283Z,1516737275.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:35.688Z,1516737275.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:36.097Z,1516737276.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:36.501Z,1516737276.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:36.901Z,1516737276.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:37.293Z,1516737277.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:37.696Z,1516737277.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:37.717Z,1516737277.717 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T19:54:38.101Z,1516737278.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:38.466Z,1516737278.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:38.907Z,1516737278.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:39.301Z,1516737279.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:39.698Z,1516737279.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:40.076Z,1516737280.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:40.481Z,1516737280.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:40.870Z,1516737280.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:41.274Z,1516737281.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:41.696Z,1516737281.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:42.101Z,1516737282.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:42.504Z,1516737282.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:42.882Z,1516737282.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:43.276Z,1516737283.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:43.677Z,1516737283.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:44.074Z,1516737284.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:47.166Z,1516737287.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:47.314Z,1516737287.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:47.654Z,1516737287.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:48.059Z,1516737288.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:48.428Z,1516737288.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:48.826Z,1516737288.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:49.240Z,1516737289.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:49.697Z,1516737289.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:50.057Z,1516737290.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:50.438Z,1516737290.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:50.841Z,1516737290.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:51.230Z,1516737291.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:51.631Z,1516737291.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:52.033Z,1516737292.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:52.430Z,1516737292.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:52.844Z,1516737292.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:53.242Z,1516737293.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:53.641Z,1516737293.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:54.032Z,1516737294.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:54.430Z,1516737294.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:54.834Z,1516737294.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:55.232Z,1516737295.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:55.631Z,1516737295.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:56.046Z,1516737296.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:56.452Z,1516737296.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:56.841Z,1516737296.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:57.237Z,1516737297.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:57.644Z,1516737297.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:58.033Z,1516737298.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:58.432Z,1516737298.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:58.842Z,1516737298.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:59.249Z,1516737299.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:54:59.675Z,1516737299.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:00.035Z,1516737300.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:00.441Z,1516737300.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:00.840Z,1516737300.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:01.248Z,1516737301.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:01.641Z,1516737301.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:02.046Z,1516737302.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:02.446Z,1516737302.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:02.850Z,1516737302.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:03.234Z,1516737303.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:03.644Z,1516737303.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:04.037Z,1516737304.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:04.438Z,1516737304.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:04.847Z,1516737304.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:05.250Z,1516737305.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:05.653Z,1516737305.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:06.042Z,1516737306.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:06.429Z,1516737306.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:06.844Z,1516737306.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:07.246Z,1516737307.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:07.644Z,1516737307.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:08.050Z,1516737308.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:08.457Z,1516737308.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:08.852Z,1516737308.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:09.244Z,1516737309.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:09.646Z,1516737309.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:10.044Z,1516737310.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:10.444Z,1516737310.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:10.859Z,1516737310.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:11.250Z,1516737311.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:11.652Z,1516737311.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:12.046Z,1516737312.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:12.422Z,1516737312.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:12.845Z,1516737312.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:13.228Z,1516737313.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:13.625Z,1516737313.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:14.061Z,1516737314.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:14.458Z,1516737314.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:14.859Z,1516737314.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:15.237Z,1516737315.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:15.632Z,1516737315.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:16.033Z,1516737316.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:16.430Z,1516737316.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:16.838Z,1516737316.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:17.238Z,1516737317.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:17.661Z,1516737317.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:18.032Z,1516737318.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:18.430Z,1516737318.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:18.830Z,1516737318.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:19.232Z,1516737319.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:19.633Z,1516737319.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:20.035Z,1516737320.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:20.438Z,1516737320.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:20.861Z,1516737320.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:21.237Z,1516737321.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:21.641Z,1516737321.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:22.034Z,1516737322.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:22.441Z,1516737322.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:22.843Z,1516737322.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:23.249Z,1516737323.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:23.652Z,1516737323.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:24.048Z,1516737324.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:24.437Z,1516737324.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:24.837Z,1516737324.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:25.244Z,1516737325.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:25.639Z,1516737325.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:26.043Z,1516737326.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:26.446Z,1516737326.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:26.842Z,1516737326.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:27.234Z,1516737327.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:27.646Z,1516737327.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:28.036Z,1516737328.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:28.439Z,1516737328.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:28.843Z,1516737328.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:29.245Z,1516737329.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:29.642Z,1516737329.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:30.045Z,1516737330.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:30.439Z,1516737330.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:30.839Z,1516737330.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:31.245Z,1516737331.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:31.629Z,1516737331.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:32.049Z,1516737332.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:32.453Z,1516737332.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:32.851Z,1516737332.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:33.243Z,1516737333.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:33.649Z,1516737333.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:34.036Z,1516737334.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:34.447Z,1516737334.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:34.847Z,1516737334.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:35.255Z,1516737335.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:35.645Z,1516737335.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:36.045Z,1516737336.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:36.449Z,1516737336.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:36.853Z,1516737336.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:37.233Z,1516737337.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:37.637Z,1516737337.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:38.038Z,1516737338.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:38.462Z,1516737338.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:38.846Z,1516737338.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:39.236Z,1516737339.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:39.633Z,1516737339.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:40.033Z,1516737340.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:40.432Z,1516737340.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:40.838Z,1516737340.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:41.238Z,1516737341.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:41.638Z,1516737341.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:42.034Z,1516737342.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:42.432Z,1516737342.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:42.845Z,1516737342.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:43.238Z,1516737343.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:43.669Z,1516737343.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:44.037Z,1516737344.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:44.441Z,1516737344.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:47.521Z,1516737347.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:47.664Z,1516737347.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:47.991Z,1516737347.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:48.419Z,1516737348.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:48.791Z,1516737348.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:49.188Z,1516737349.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:49.587Z,1516737349.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:49.988Z,1516737349.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:50.387Z,1516737350.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:50.788Z,1516737350.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:51.190Z,1516737351.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:51.594Z,1516737351.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:52.019Z,1516737352.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:52.397Z,1516737352.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:52.787Z,1516737352.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:53.188Z,1516737353.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:53.586Z,1516737353.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:53.991Z,1516737353.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:54.394Z,1516737354.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:54.791Z,1516737354.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:55.188Z,1516737355.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:55.589Z,1516737355.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:55.993Z,1516737355.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:56.387Z,1516737356.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:56.792Z,1516737356.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:57.219Z,1516737357.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:57.594Z,1516737357.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:57.993Z,1516737357.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:58.387Z,1516737358.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:58.788Z,1516737358.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:59.202Z,1516737359.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:59.586Z,1516737359.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:55:59.997Z,1516737359.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:00.394Z,1516737360.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:00.797Z,1516737360.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:01.189Z,1516737361.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:01.589Z,1516737361.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:01.996Z,1516737361.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:02.394Z,1516737362.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:02.796Z,1516737362.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:03.198Z,1516737363.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:03.603Z,1516737363.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:04.003Z,1516737364.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:04.397Z,1516737364.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:04.795Z,1516737364.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:05.201Z,1516737365.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:05.591Z,1516737365.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:06.001Z,1516737366.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:06.418Z,1516737366.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:06.808Z,1516737366.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:07.179Z,1516737367.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:07.580Z,1516737367.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:07.989Z,1516737367.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:08.385Z,1516737368.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:08.785Z,1516737368.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:09.214Z,1516737369.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:09.598Z,1516737369.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:09.990Z,1516737369.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:10.388Z,1516737370.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:10.793Z,1516737370.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:11.189Z,1516737371.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:11.588Z,1516737371.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:11.997Z,1516737371.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:12.398Z,1516737372.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:12.798Z,1516737372.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:13.190Z,1516737373.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:13.591Z,1516737373.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:13.989Z,1516737373.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:14.399Z,1516737374.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:14.793Z,1516737374.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:15.201Z,1516737375.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:15.602Z,1516737375.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:15.000Z,1516737376.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:16.390Z,1516737376.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:16.791Z,1516737376.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:17.200Z,1516737377.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:17.590Z,1516737377.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:18.002Z,1516737378.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:18.402Z,1516737378.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:18.798Z,1516737378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:19.195Z,1516737379.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:19.597Z,1516737379.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:19.989Z,1516737379.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:19.991Z,1516737379.991 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:19.991Z,1516737379.991 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 332 2018-01-23T19:56:19.991Z,1516737379.991 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:56:20.004Z,1516737380.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:56:20.405Z,1516737380.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:20.438Z,1516737380.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:56:20.438Z,1516737380.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 332 2018-01-23T19:56:20.791Z,1516737380.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:20.793Z,1516737380.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:56:20.793Z,1516737380.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:56:20.793Z,1516737380.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:56:21.198Z,1516737381.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:21.605Z,1516737381.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:22.007Z,1516737382.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:22.389Z,1516737382.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:22.798Z,1516737382.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:23.193Z,1516737383.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:23.592Z,1516737383.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:24.001Z,1516737384.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:24.402Z,1516737384.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:24.798Z,1516737384.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:25.190Z,1516737385.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:25.601Z,1516737385.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:25.996Z,1516737385.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:26.391Z,1516737386.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:26.801Z,1516737386.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:27.199Z,1516737387.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:27.602Z,1516737387.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:28.007Z,1516737388.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:28.396Z,1516737388.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:28.796Z,1516737388.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:29.193Z,1516737389.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:29.591Z,1516737389.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:29.999Z,1516737389.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:30.402Z,1516737390.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:30.805Z,1516737390.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:31.196Z,1516737391.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:31.592Z,1516737391.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:31.990Z,1516737391.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:32.397Z,1516737392.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:32.792Z,1516737392.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:33.199Z,1516737393.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:33.611Z,1516737393.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:34.000Z,1516737394.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:34.400Z,1516737394.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:34.800Z,1516737394.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:35.202Z,1516737395.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:35.202Z,1516737395.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 332 2018-01-23T19:56:35.202Z,1516737395.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:56:35.204Z,1516737395.204 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:35.204Z,1516737395.204 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 332 2018-01-23T19:56:35.204Z,1516737395.204 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:56:35.217Z,1516737395.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:56:35.217Z,1516737395.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:56:35.607Z,1516737395.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:56:35.607Z,1516737395.607 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 332 2018-01-23T19:56:35.608Z,1516737395.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:56:35.608Z,1516737395.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 332 2018-01-23T19:56:36.007Z,1516737396.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:56:36.008Z,1516737396.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:56:36.008Z,1516737396.008 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:56:36.009Z,1516737396.009 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:56:36.009Z,1516737396.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:56:36.009Z,1516737396.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:56:36.413Z,1516737396.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:56:36.414Z,1516737396.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:36.809Z,1516737396.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:56:36.810Z,1516737396.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:37.192Z,1516737397.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:56:37.193Z,1516737397.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:37.594Z,1516737397.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:56:37.595Z,1516737397.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:37.992Z,1516737397.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:56:37.993Z,1516737397.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:38.387Z,1516737398.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:56:38.388Z,1516737398.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:38.788Z,1516737398.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:56:38.789Z,1516737398.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:39.221Z,1516737399.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:56:39.222Z,1516737399.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:39.593Z,1516737399.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:56:39.594Z,1516737399.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:39.989Z,1516737399.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:56:39.990Z,1516737399.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:40.391Z,1516737400.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:56:40.392Z,1516737400.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:40.793Z,1516737400.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:56:40.794Z,1516737400.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:41.191Z,1516737401.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:56:41.192Z,1516737401.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:41.591Z,1516737401.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:56:41.592Z,1516737401.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:41.996Z,1516737401.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:56:41.997Z,1516737401.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:42.393Z,1516737402.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:56:42.394Z,1516737402.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:42.796Z,1516737402.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:56:42.797Z,1516737402.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:43.196Z,1516737403.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:56:43.197Z,1516737403.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:43.200Z,1516737403.200 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T19:56:43.200Z,1516737403.200 [Default:CheckIn:C.Wait] Stopped 2018-01-23T19:56:43.201Z,1516737403.201 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T19:56:43.201Z,1516737403.201 [Default:CheckIn:D] Running Loop=1 2018-01-23T19:56:43.587Z,1516737403.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:56:43.588Z,1516737403.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:43.591Z,1516737403.591 [Default:CheckIn:D] Stopped 2018-01-23T19:56:43.591Z,1516737403.591 [Default:CheckIn:E] Running Loop=1 2018-01-23T19:56:43.988Z,1516737403.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:56:43.989Z,1516737403.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:43.992Z,1516737403.992 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 998.858854 min 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn:E] Stopped 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn] Stopped 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn](INFO): Running loop #98 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn] Running Loop=98 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T19:56:43.993Z,1516737403.993 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T19:56:44.394Z,1516737404.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:56:44.396Z,1516737404.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:44.796Z,1516737404.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T19:56:44.797Z,1516737404.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:50.350Z,1516737410.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T19:56:50.351Z,1516737410.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:50.508Z,1516737410.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T19:56:50.509Z,1516737410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:50.860Z,1516737410.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T19:56:50.861Z,1516737410.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:51.257Z,1516737411.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T19:56:51.258Z,1516737411.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:51.649Z,1516737411.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:56:51.650Z,1516737411.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:52.048Z,1516737412.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:56:52.049Z,1516737412.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:52.445Z,1516737412.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:56:52.446Z,1516737412.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:52.847Z,1516737412.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:56:52.848Z,1516737412.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:53.249Z,1516737413.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:56:53.250Z,1516737413.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:53.671Z,1516737413.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T19:56:53.672Z,1516737413.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:54.064Z,1516737414.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T19:56:54.065Z,1516737414.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:54.501Z,1516737414.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T19:56:54.502Z,1516737414.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:54.821Z,1516737414.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:56:54.822Z,1516737414.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:55.235Z,1516737415.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:55.630Z,1516737415.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:56.045Z,1516737416.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:56.490Z,1516737416.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:56.883Z,1516737416.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:57.250Z,1516737417.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:57.654Z,1516737417.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:58.051Z,1516737418.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:58.425Z,1516737418.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:58.859Z,1516737418.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:59.274Z,1516737419.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:56:59.641Z,1516737419.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:00.041Z,1516737420.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:00.440Z,1516737420.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:00.841Z,1516737420.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:01.246Z,1516737421.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:01.648Z,1516737421.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:02.046Z,1516737422.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:02.444Z,1516737422.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:02.859Z,1516737422.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:03.225Z,1516737423.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:03.664Z,1516737423.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:04.060Z,1516737424.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:04.435Z,1516737424.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:04.825Z,1516737424.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:05.242Z,1516737425.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:05.638Z,1516737425.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:06.045Z,1516737426.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:06.472Z,1516737426.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:06.833Z,1516737426.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:07.230Z,1516737427.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:07.660Z,1516737427.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:08.042Z,1516737428.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:08.465Z,1516737428.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:08.860Z,1516737428.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:09.226Z,1516737429.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:09.699Z,1516737429.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:10.065Z,1516737430.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:10.415Z,1516737430.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:10.813Z,1516737430.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:11.222Z,1516737431.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:11.622Z,1516737431.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:12.029Z,1516737432.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:12.421Z,1516737432.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:12.816Z,1516737432.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:13.219Z,1516737433.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:13.625Z,1516737433.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:14.026Z,1516737434.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:14.430Z,1516737434.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:14.827Z,1516737434.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:15.217Z,1516737435.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:15.617Z,1516737435.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:16.020Z,1516737436.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:16.418Z,1516737436.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:16.825Z,1516737436.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:17.230Z,1516737437.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:17.633Z,1516737437.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:18.033Z,1516737438.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:18.416Z,1516737438.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:18.817Z,1516737438.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:19.218Z,1516737439.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:19.619Z,1516737439.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:20.018Z,1516737440.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:20.444Z,1516737440.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:20.846Z,1516737440.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:21.270Z,1516737441.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:21.616Z,1516737441.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:22.014Z,1516737442.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:22.413Z,1516737442.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:22.815Z,1516737442.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:23.226Z,1516737443.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:23.618Z,1516737443.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:24.018Z,1516737444.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:24.416Z,1516737444.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:24.813Z,1516737444.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:25.216Z,1516737445.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:25.620Z,1516737445.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:26.018Z,1516737446.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:26.422Z,1516737446.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:26.834Z,1516737446.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:27.218Z,1516737447.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:27.621Z,1516737447.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:28.016Z,1516737448.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:28.418Z,1516737448.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:28.821Z,1516737448.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:29.221Z,1516737449.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:29.622Z,1516737449.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:30.025Z,1516737450.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:30.419Z,1516737450.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:30.813Z,1516737450.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:31.224Z,1516737451.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:31.616Z,1516737451.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:32.022Z,1516737452.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:32.434Z,1516737452.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:32.825Z,1516737452.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:33.216Z,1516737453.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:33.621Z,1516737453.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:34.016Z,1516737454.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:34.421Z,1516737454.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:34.818Z,1516737454.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:35.232Z,1516737455.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:35.626Z,1516737455.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:36.031Z,1516737456.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:36.418Z,1516737456.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:36.817Z,1516737456.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:37.219Z,1516737457.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:37.620Z,1516737457.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:37.973Z,1516737457.973 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T19:57:37.974Z,1516737457.974 [NAL9602] Data Fault, FailCount= 1 2018-01-23T19:57:37.974Z,1516737457.974 [NAL9602](ERROR): Data Fault 2018-01-23T19:57:38.026Z,1516737458.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:38.052Z,1516737458.052 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T19:57:38.384Z,1516737458.384 [NAL9602](INFO): Powering down 2018-01-23T19:57:38.431Z,1516737458.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:38.818Z,1516737458.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:39.224Z,1516737459.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:39.237Z,1516737459.237 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T19:57:39.238Z,1516737459.238 [NAL9602] No Fault, FailCount= 1 2018-01-23T19:57:39.615Z,1516737459.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:40.018Z,1516737460.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:40.417Z,1516737460.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:40.820Z,1516737460.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:41.218Z,1516737461.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:41.618Z,1516737461.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:42.024Z,1516737462.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:42.419Z,1516737462.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:42.817Z,1516737462.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:43.220Z,1516737463.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:43.623Z,1516737463.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:44.022Z,1516737464.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:44.438Z,1516737464.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:44.828Z,1516737464.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:47.916Z,1516737467.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:48.031Z,1516737468.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:48.389Z,1516737468.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:48.790Z,1516737468.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:49.186Z,1516737469.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:49.610Z,1516737469.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:49.983Z,1516737469.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:50.382Z,1516737470.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:50.784Z,1516737470.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:51.197Z,1516737471.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:51.580Z,1516737471.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:51.984Z,1516737471.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:52.382Z,1516737472.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:52.797Z,1516737472.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:53.183Z,1516737473.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:53.582Z,1516737473.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:53.981Z,1516737473.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:54.398Z,1516737474.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:54.787Z,1516737474.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:55.186Z,1516737475.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:55.584Z,1516737475.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:55.991Z,1516737475.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:56.380Z,1516737476.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:56.792Z,1516737476.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:57.182Z,1516737477.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:57.595Z,1516737477.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:57.992Z,1516737477.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:58.383Z,1516737478.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:58.780Z,1516737478.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:59.200Z,1516737479.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:59.578Z,1516737479.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:57:59.983Z,1516737479.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:00.385Z,1516737480.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:00.782Z,1516737480.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:01.178Z,1516737481.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:01.586Z,1516737481.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:01.983Z,1516737481.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:02.381Z,1516737482.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:02.785Z,1516737482.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:03.185Z,1516737483.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:03.591Z,1516737483.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:03.985Z,1516737483.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:04.382Z,1516737484.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:04.781Z,1516737484.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:05.190Z,1516737485.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:05.595Z,1516737485.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:05.968Z,1516737485.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:06.405Z,1516737486.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:06.781Z,1516737486.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:07.177Z,1516737487.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:07.579Z,1516737487.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:07.976Z,1516737487.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:08.394Z,1516737488.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:08.749Z,1516737488.749 [NAL9602](INFO): Powering up NAL9602 2018-01-23T19:58:08.781Z,1516737488.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:09.178Z,1516737489.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:09.578Z,1516737489.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:09.978Z,1516737489.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:10.379Z,1516737490.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:10.778Z,1516737490.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:11.178Z,1516737491.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:11.577Z,1516737491.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:11.980Z,1516737491.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:12.386Z,1516737492.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:12.777Z,1516737492.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:13.179Z,1516737493.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:13.579Z,1516737493.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:13.978Z,1516737493.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:14.378Z,1516737494.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:14.784Z,1516737494.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:15.178Z,1516737495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:15.576Z,1516737495.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:15.984Z,1516737495.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:16.378Z,1516737496.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:16.778Z,1516737496.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:17.178Z,1516737497.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:17.578Z,1516737497.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:17.978Z,1516737497.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:18.388Z,1516737498.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:18.780Z,1516737498.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:19.179Z,1516737499.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:19.581Z,1516737499.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:19.940Z,1516737499.940 [NAL9602](INFO): NAL9602 initialized 2018-01-23T19:58:19.990Z,1516737499.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:20.383Z,1516737500.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:20.792Z,1516737500.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:21.191Z,1516737501.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:21.585Z,1516737501.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:21.981Z,1516737501.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:22.383Z,1516737502.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:22.780Z,1516737502.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:23.185Z,1516737503.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:23.588Z,1516737503.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:23.986Z,1516737503.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:24.385Z,1516737504.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:24.783Z,1516737504.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:25.180Z,1516737505.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:25.581Z,1516737505.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:25.984Z,1516737505.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:26.379Z,1516737506.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:26.792Z,1516737506.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:27.191Z,1516737507.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:27.589Z,1516737507.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:27.984Z,1516737507.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:28.389Z,1516737508.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:28.780Z,1516737508.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:29.185Z,1516737509.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:29.590Z,1516737509.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:29.988Z,1516737509.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:30.389Z,1516737510.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:30.779Z,1516737510.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:31.180Z,1516737511.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:31.588Z,1516737511.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:31.984Z,1516737511.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:32.381Z,1516737512.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:32.790Z,1516737512.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:33.190Z,1516737513.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:33.588Z,1516737513.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:33.984Z,1516737513.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:34.389Z,1516737514.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:34.780Z,1516737514.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:35.184Z,1516737515.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:35.589Z,1516737515.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:35.988Z,1516737515.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:36.396Z,1516737516.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:36.789Z,1516737516.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:37.179Z,1516737517.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:37.588Z,1516737517.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:37.983Z,1516737517.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:38.380Z,1516737518.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:38.792Z,1516737518.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:39.190Z,1516737519.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:39.588Z,1516737519.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:39.984Z,1516737519.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:40.389Z,1516737520.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:40.780Z,1516737520.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:41.184Z,1516737521.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:41.597Z,1516737521.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:41.992Z,1516737521.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:42.396Z,1516737522.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:42.793Z,1516737522.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:43.185Z,1516737523.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:43.585Z,1516737523.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:43.989Z,1516737523.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:44.387Z,1516737524.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:44.791Z,1516737524.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:45.194Z,1516737525.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:48.286Z,1516737528.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:48.432Z,1516737528.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:48.753Z,1516737528.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:49.156Z,1516737529.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:49.561Z,1516737529.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:49.987Z,1516737529.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:50.365Z,1516737530.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:50.750Z,1516737530.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:51.157Z,1516737531.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:51.555Z,1516737531.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:51.953Z,1516737531.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:52.351Z,1516737532.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:52.758Z,1516737532.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:53.158Z,1516737533.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:53.561Z,1516737533.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:53.956Z,1516737533.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:54.351Z,1516737534.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:54.765Z,1516737534.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:55.156Z,1516737535.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:55.569Z,1516737535.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:55.962Z,1516737535.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:56.362Z,1516737536.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:56.766Z,1516737536.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:57.154Z,1516737537.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:57.560Z,1516737537.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:57.957Z,1516737537.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:58.354Z,1516737538.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:58.764Z,1516737538.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:59.162Z,1516737539.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:59.570Z,1516737539.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:58:59.952Z,1516737539.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:00.353Z,1516737540.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:00.761Z,1516737540.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:01.152Z,1516737541.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:01.566Z,1516737541.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:01.967Z,1516737541.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:02.378Z,1516737542.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:02.759Z,1516737542.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:03.161Z,1516737543.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:03.564Z,1516737543.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:03.964Z,1516737543.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:04.364Z,1516737544.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:04.774Z,1516737544.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:05.173Z,1516737545.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:05.572Z,1516737545.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:05.963Z,1516737545.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:06.365Z,1516737546.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:06.748Z,1516737546.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:07.180Z,1516737547.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:07.554Z,1516737547.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:07.978Z,1516737547.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:08.383Z,1516737548.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:08.749Z,1516737548.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:09.151Z,1516737549.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:09.561Z,1516737549.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:09.953Z,1516737549.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:10.351Z,1516737550.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:10.759Z,1516737550.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:11.161Z,1516737551.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:11.566Z,1516737551.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:11.956Z,1516737551.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:12.351Z,1516737552.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:12.752Z,1516737552.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:13.153Z,1516737553.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:13.561Z,1516737553.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:13.962Z,1516737553.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:14.357Z,1516737554.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:14.751Z,1516737554.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:15.151Z,1516737555.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:15.552Z,1516737555.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:15.953Z,1516737555.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:16.350Z,1516737556.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:16.757Z,1516737556.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:17.158Z,1516737557.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:17.561Z,1516737557.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:17.952Z,1516737557.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:18.351Z,1516737558.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:18.753Z,1516737558.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:19.152Z,1516737559.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:19.570Z,1516737559.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:19.965Z,1516737559.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:20.362Z,1516737560.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:20.765Z,1516737560.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:21.161Z,1516737561.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:21.163Z,1516737561.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:21.163Z,1516737561.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 333 2018-01-23T19:59:21.163Z,1516737561.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T19:59:21.175Z,1516737561.175 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T19:59:21.569Z,1516737561.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:21.595Z,1516737561.595 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T19:59:21.595Z,1516737561.595 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 333 2018-01-23T19:59:21.966Z,1516737561.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:21.968Z,1516737561.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T19:59:21.968Z,1516737561.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:59:21.969Z,1516737561.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:59:22.374Z,1516737562.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:22.764Z,1516737562.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:23.157Z,1516737563.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:23.569Z,1516737563.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:23.979Z,1516737563.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:24.364Z,1516737564.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:24.764Z,1516737564.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:25.165Z,1516737565.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:25.577Z,1516737565.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:25.974Z,1516737565.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:26.375Z,1516737566.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:26.745Z,1516737566.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:27.176Z,1516737567.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:27.575Z,1516737567.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:27.979Z,1516737567.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:28.377Z,1516737568.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:28.748Z,1516737568.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:29.181Z,1516737569.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:29.582Z,1516737569.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:29.965Z,1516737569.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:30.358Z,1516737570.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:30.760Z,1516737570.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:31.157Z,1516737571.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:31.573Z,1516737571.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:31.969Z,1516737571.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:32.363Z,1516737572.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:32.755Z,1516737572.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:33.154Z,1516737573.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:33.563Z,1516737573.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:33.973Z,1516737573.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:34.373Z,1516737574.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:34.757Z,1516737574.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:35.160Z,1516737575.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:35.573Z,1516737575.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:35.971Z,1516737575.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:36.373Z,1516737576.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:36.373Z,1516737576.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 333 2018-01-23T19:59:36.373Z,1516737576.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T19:59:36.375Z,1516737576.375 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:36.375Z,1516737576.375 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 333 2018-01-23T19:59:36.375Z,1516737576.375 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T19:59:36.404Z,1516737576.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T19:59:36.404Z,1516737576.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T19:59:36.771Z,1516737576.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T19:59:36.771Z,1516737576.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 333 2018-01-23T19:59:36.772Z,1516737576.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T19:59:36.772Z,1516737576.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 333 2018-01-23T19:59:37.160Z,1516737577.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T19:59:37.161Z,1516737577.161 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:59:37.161Z,1516737577.161 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:59:37.161Z,1516737577.161 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T19:59:37.162Z,1516737577.162 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T19:59:37.162Z,1516737577.162 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T19:59:37.562Z,1516737577.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T19:59:37.563Z,1516737577.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:37.966Z,1516737577.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T19:59:37.967Z,1516737577.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:38.373Z,1516737578.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T19:59:38.374Z,1516737578.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:38.757Z,1516737578.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T19:59:38.758Z,1516737578.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:39.161Z,1516737579.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T19:59:39.161Z,1516737579.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:39.576Z,1516737579.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T19:59:39.577Z,1516737579.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:39.966Z,1516737579.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T19:59:39.967Z,1516737579.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:40.365Z,1516737580.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T19:59:40.365Z,1516737580.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:40.765Z,1516737580.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T19:59:40.766Z,1516737580.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:41.157Z,1516737581.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T19:59:41.158Z,1516737581.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:41.564Z,1516737581.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T19:59:41.565Z,1516737581.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:41.972Z,1516737581.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T19:59:41.973Z,1516737581.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:42.366Z,1516737582.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T19:59:42.368Z,1516737582.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:42.763Z,1516737582.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T19:59:42.764Z,1516737582.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:43.166Z,1516737583.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T19:59:43.167Z,1516737583.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:43.568Z,1516737583.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T19:59:43.569Z,1516737583.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:43.969Z,1516737583.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T19:59:43.970Z,1516737583.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:44.374Z,1516737584.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T19:59:44.375Z,1516737584.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:44.756Z,1516737584.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T19:59:44.757Z,1516737584.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:45.164Z,1516737585.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T19:59:45.165Z,1516737585.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:45.574Z,1516737585.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T19:59:45.575Z,1516737585.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:48.670Z,1516737588.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T19:59:48.672Z,1516737588.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:48.824Z,1516737588.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T19:59:48.825Z,1516737588.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:49.134Z,1516737589.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T19:59:49.135Z,1516737589.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:49.541Z,1516737589.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T19:59:49.542Z,1516737589.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:49.934Z,1516737589.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T19:59:49.939Z,1516737589.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:50.334Z,1516737590.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T19:59:50.335Z,1516737590.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:50.755Z,1516737590.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T19:59:50.756Z,1516737590.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:51.145Z,1516737591.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T19:59:51.145Z,1516737591.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:51.545Z,1516737591.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T19:59:51.546Z,1516737591.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:51.939Z,1516737591.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T19:59:51.940Z,1516737591.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:52.345Z,1516737592.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T19:59:52.346Z,1516737592.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:52.737Z,1516737592.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T19:59:52.738Z,1516737592.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:53.152Z,1516737593.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T19:59:53.153Z,1516737593.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:53.540Z,1516737593.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T19:59:53.541Z,1516737593.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:53.946Z,1516737593.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T19:59:53.947Z,1516737593.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:54.353Z,1516737594.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T19:59:54.354Z,1516737594.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:54.756Z,1516737594.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T19:59:54.757Z,1516737594.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:55.144Z,1516737595.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T19:59:55.145Z,1516737595.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:55.544Z,1516737595.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T19:59:55.545Z,1516737595.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:55.934Z,1516737595.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T19:59:55.935Z,1516737595.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:56.340Z,1516737596.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T19:59:56.341Z,1516737596.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:56.753Z,1516737596.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:57.153Z,1516737597.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:57.553Z,1516737597.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:57.940Z,1516737597.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:58.347Z,1516737598.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:58.737Z,1516737598.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:59.153Z,1516737599.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:59.541Z,1516737599.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T19:59:59.949Z,1516737599.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:00.351Z,1516737600.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:00.757Z,1516737600.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:01.149Z,1516737601.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:01.553Z,1516737601.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:01.945Z,1516737601.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:02.348Z,1516737602.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:02.761Z,1516737602.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:03.155Z,1516737603.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:03.549Z,1516737603.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:03.949Z,1516737603.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:04.329Z,1516737604.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:04.758Z,1516737604.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:05.134Z,1516737605.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:05.541Z,1516737605.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:05.963Z,1516737605.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:06.341Z,1516737606.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:06.738Z,1516737606.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:07.136Z,1516737607.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:07.535Z,1516737607.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:07.945Z,1516737607.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:08.335Z,1516737608.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:08.742Z,1516737608.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:09.146Z,1516737609.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:09.542Z,1516737609.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:09.937Z,1516737609.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:10.336Z,1516737610.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:10.735Z,1516737610.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:11.137Z,1516737611.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:11.536Z,1516737611.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:11.949Z,1516737611.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:12.346Z,1516737612.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:12.745Z,1516737612.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:13.139Z,1516737613.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:13.536Z,1516737613.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:13.937Z,1516737613.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:14.335Z,1516737614.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:14.742Z,1516737614.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:15.142Z,1516737615.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:15.541Z,1516737615.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:15.936Z,1516737615.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:16.335Z,1516737616.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:16.744Z,1516737616.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:17.137Z,1516737617.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:17.536Z,1516737617.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:17.941Z,1516737617.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:18.342Z,1516737618.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:18.749Z,1516737618.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:19.140Z,1516737619.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:19.536Z,1516737619.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:19.938Z,1516737619.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:20.338Z,1516737620.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:20.747Z,1516737620.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:21.157Z,1516737621.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:21.549Z,1516737621.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:21.945Z,1516737621.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:22.345Z,1516737622.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:22.737Z,1516737622.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:23.140Z,1516737623.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:23.545Z,1516737623.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:23.945Z,1516737623.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:24.349Z,1516737624.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:24.745Z,1516737624.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:25.145Z,1516737625.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:25.544Z,1516737625.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:25.938Z,1516737625.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:26.346Z,1516737626.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:26.749Z,1516737626.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:27.153Z,1516737627.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:27.553Z,1516737627.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:27.944Z,1516737627.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:28.338Z,1516737628.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:28.745Z,1516737628.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:29.144Z,1516737629.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:29.545Z,1516737629.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:29.945Z,1516737629.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:30.356Z,1516737630.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:30.753Z,1516737630.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:31.145Z,1516737631.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:31.550Z,1516737631.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:31.940Z,1516737631.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:32.345Z,1516737632.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:32.746Z,1516737632.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:33.149Z,1516737633.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:33.553Z,1516737633.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:33.944Z,1516737633.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:34.339Z,1516737634.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:34.745Z,1516737634.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:35.144Z,1516737635.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:35.539Z,1516737635.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:35.945Z,1516737635.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:36.348Z,1516737636.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:36.753Z,1516737636.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:37.137Z,1516737637.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:37.540Z,1516737637.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:37.942Z,1516737637.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:38.341Z,1516737638.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:38.747Z,1516737638.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:39.153Z,1516737639.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:39.546Z,1516737639.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:39.949Z,1516737639.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:40.349Z,1516737640.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:40.745Z,1516737640.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:41.146Z,1516737641.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:41.534Z,1516737641.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:41.957Z,1516737641.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:42.356Z,1516737642.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:42.756Z,1516737642.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:43.147Z,1516737643.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:43.550Z,1516737643.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:43.941Z,1516737643.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:44.355Z,1516737644.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:44.760Z,1516737644.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:45.153Z,1516737645.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:45.556Z,1516737645.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:45.959Z,1516737645.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:49.027Z,1516737649.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:49.154Z,1516737649.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:49.556Z,1516737649.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:49.951Z,1516737649.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:50.351Z,1516737650.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:50.731Z,1516737650.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:51.129Z,1516737651.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:51.529Z,1516737651.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:51.934Z,1516737651.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:52.334Z,1516737652.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:52.752Z,1516737652.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:53.127Z,1516737653.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:53.525Z,1516737653.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:53.932Z,1516737653.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:54.327Z,1516737654.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:54.730Z,1516737654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:55.134Z,1516737655.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:55.530Z,1516737655.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:55.921Z,1516737655.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:56.329Z,1516737656.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:56.728Z,1516737656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:57.132Z,1516737657.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:57.536Z,1516737657.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:57.939Z,1516737657.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:58.341Z,1516737658.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:58.739Z,1516737658.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:59.129Z,1516737659.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:59.527Z,1516737659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:00:59.929Z,1516737659.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:00.332Z,1516737660.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:00.737Z,1516737660.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:01.141Z,1516737661.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:01.537Z,1516737661.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:01.935Z,1516737661.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:02.329Z,1516737662.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:02.729Z,1516737662.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:03.129Z,1516737663.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:03.538Z,1516737663.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:03.941Z,1516737663.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:04.345Z,1516737664.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:04.745Z,1516737664.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:05.136Z,1516737665.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:05.530Z,1516737665.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:05.930Z,1516737665.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:06.329Z,1516737666.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:06.747Z,1516737666.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:07.145Z,1516737667.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:07.542Z,1516737667.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:07.933Z,1516737667.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:08.333Z,1516737668.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:08.736Z,1516737668.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:09.133Z,1516737669.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:09.533Z,1516737669.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:09.942Z,1516737669.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:10.353Z,1516737670.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:10.753Z,1516737670.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:11.135Z,1516737671.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:11.535Z,1516737671.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:11.937Z,1516737671.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:12.335Z,1516737672.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:12.738Z,1516737672.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:13.152Z,1516737673.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:13.542Z,1516737673.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:13.939Z,1516737673.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:14.339Z,1516737674.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:14.743Z,1516737674.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:15.141Z,1516737675.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:15.557Z,1516737675.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:15.939Z,1516737675.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:16.341Z,1516737676.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:16.741Z,1516737676.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:17.135Z,1516737677.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:17.529Z,1516737677.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:17.948Z,1516737677.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:18.343Z,1516737678.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:18.753Z,1516737678.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:19.138Z,1516737679.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:19.542Z,1516737679.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:19.940Z,1516737679.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:20.333Z,1516737680.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:20.747Z,1516737680.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:21.152Z,1516737681.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:21.548Z,1516737681.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:21.946Z,1516737681.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:22.346Z,1516737682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:22.753Z,1516737682.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:23.150Z,1516737683.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:23.538Z,1516737683.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:23.929Z,1516737683.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:24.330Z,1516737684.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:24.753Z,1516737684.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:25.154Z,1516737685.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:25.556Z,1516737685.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:25.932Z,1516737685.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:26.330Z,1516737686.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:26.747Z,1516737686.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:27.154Z,1516737687.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:27.552Z,1516737687.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:27.945Z,1516737687.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:28.342Z,1516737688.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:28.757Z,1516737688.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:29.155Z,1516737689.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:29.549Z,1516737689.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:29.930Z,1516737689.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:30.328Z,1516737690.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:30.746Z,1516737690.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:31.132Z,1516737691.132 [PNI_TCM](ERROR): CRC does not match. Expected:0x25779 got:0x49773 2018-01-23T20:01:31.153Z,1516737691.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:31.545Z,1516737691.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:31.930Z,1516737691.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:32.357Z,1516737692.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:32.729Z,1516737692.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x4866 got:0x39338 2018-01-23T20:01:32.761Z,1516737692.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:33.137Z,1516737693.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:33.542Z,1516737693.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:33.945Z,1516737693.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:34.319Z,1516737694.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T20:01:34.345Z,1516737694.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:34.731Z,1516737694.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x9501 got:0x16951 2018-01-23T20:01:34.768Z,1516737694.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:35.141Z,1516737695.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:35.564Z,1516737695.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:35.925Z,1516737695.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x382 got:0x45134 2018-01-23T20:01:35.958Z,1516737695.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:36.329Z,1516737696.329 [PNI_TCM](ERROR): CRC does not match. Expected:0x65311 got:0x49773 2018-01-23T20:01:36.361Z,1516737696.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:36.748Z,1516737696.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:37.225Z,1516737697.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:37.542Z,1516737697.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:37.934Z,1516737697.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:38.332Z,1516737698.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:38.749Z,1516737698.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:39.141Z,1516737699.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:39.539Z,1516737699.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:39.942Z,1516737699.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:40.354Z,1516737700.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:40.753Z,1516737700.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:41.168Z,1516737701.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:41.549Z,1516737701.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:41.957Z,1516737701.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:42.369Z,1516737702.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:42.757Z,1516737702.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:43.157Z,1516737703.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:43.568Z,1516737703.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:43.945Z,1516737703.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:44.346Z,1516737704.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:44.354Z,1516737704.354 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T19:56:43.0Z 2018-01-23T20:01:44.354Z,1516737704.354 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:01:44.354Z,1516737704.354 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:01:44.771Z,1516737704.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:45.302Z,1516737705.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:45.566Z,1516737705.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:52.199Z,1516737712.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:52.269Z,1516737712.269 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0392.lzma 2018-01-23T20:01:52.362Z,1516737712.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:52.715Z,1516737712.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:53.026Z,1516737713.026 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0392.lzma.bak 2018-01-23T20:01:53.026Z,1516737713.026 [DataOverHttps](INFO): SBD MOMSN=7756559 2018-01-23T20:01:53.133Z,1516737713.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:54.003Z,1516737714.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:01:54.166Z,1516737714.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:00.144Z,1516737720.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:00.277Z,1516737720.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:00.677Z,1516737720.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:01.100Z,1516737721.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:01.480Z,1516737721.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:01.849Z,1516737721.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:07.658Z,1516737727.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:11.174Z,1516737731.174 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0393.lzma 2018-01-23T20:02:11.214Z,1516737731.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:11.381Z,1516737731.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:11.988Z,1516737731.988 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0393.lzma.bak 2018-01-23T20:02:11.988Z,1516737731.988 [DataOverHttps](INFO): SBD MOMSN=7756561 2018-01-23T20:02:12.101Z,1516737732.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:12.461Z,1516737732.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:12.464Z,1516737732.464 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:02:12.464Z,1516737732.464 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:02:12.464Z,1516737732.464 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:02:12.589Z,1516737732.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:15.696Z,1516737735.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:15.813Z,1516737735.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:16.189Z,1516737736.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:16.596Z,1516737736.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:16.962Z,1516737736.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:17.361Z,1516737737.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:17.768Z,1516737737.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:18.169Z,1516737738.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:18.565Z,1516737738.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:18.966Z,1516737738.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:19.366Z,1516737739.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:19.765Z,1516737739.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:20.161Z,1516737740.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:20.561Z,1516737740.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:20.968Z,1516737740.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:21.361Z,1516737741.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:21.765Z,1516737741.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:22.165Z,1516737742.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:22.168Z,1516737742.168 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:22.168Z,1516737742.168 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 334 2018-01-23T20:02:22.168Z,1516737742.168 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:02:22.196Z,1516737742.196 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:02:22.581Z,1516737742.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:22.623Z,1516737742.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:02:22.624Z,1516737742.624 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 334 2018-01-23T20:02:22.981Z,1516737742.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:22.991Z,1516737742.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:02:22.991Z,1516737742.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:02:22.992Z,1516737742.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:02:23.373Z,1516737743.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:23.773Z,1516737743.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:24.163Z,1516737744.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:24.573Z,1516737744.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:24.976Z,1516737744.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:25.380Z,1516737745.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:25.774Z,1516737745.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:26.170Z,1516737746.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:26.561Z,1516737746.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:26.964Z,1516737746.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:27.354Z,1516737747.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:27.753Z,1516737747.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:28.185Z,1516737748.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:28.586Z,1516737748.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:28.980Z,1516737748.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:29.365Z,1516737749.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:29.761Z,1516737749.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:30.160Z,1516737750.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:30.565Z,1516737750.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:30.991Z,1516737750.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:31.388Z,1516737751.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:31.763Z,1516737751.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:32.159Z,1516737752.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:32.565Z,1516737752.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:32.961Z,1516737752.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:33.360Z,1516737753.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:33.759Z,1516737753.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:34.163Z,1516737754.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:34.566Z,1516737754.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:34.963Z,1516737754.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:35.359Z,1516737755.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:35.764Z,1516737755.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:36.169Z,1516737756.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:36.561Z,1516737756.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:36.972Z,1516737756.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:37.371Z,1516737757.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:37.371Z,1516737757.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 334 2018-01-23T20:02:37.371Z,1516737757.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:02:37.373Z,1516737757.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:37.373Z,1516737757.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 334 2018-01-23T20:02:37.373Z,1516737757.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:02:37.406Z,1516737757.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:02:37.411Z,1516737757.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:02:37.796Z,1516737757.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:02:37.796Z,1516737757.796 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 334 2018-01-23T20:02:37.797Z,1516737757.797 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:02:37.797Z,1516737757.797 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 334 2018-01-23T20:02:38.167Z,1516737758.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:02:38.168Z,1516737758.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:02:38.168Z,1516737758.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:02:38.169Z,1516737758.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:02:38.169Z,1516737758.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:02:38.169Z,1516737758.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:02:38.570Z,1516737758.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:02:38.571Z,1516737758.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:38.968Z,1516737758.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:02:38.969Z,1516737758.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:39.366Z,1516737759.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:02:39.367Z,1516737759.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:39.761Z,1516737759.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:02:39.762Z,1516737759.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:40.179Z,1516737760.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:02:40.180Z,1516737760.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:40.584Z,1516737760.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:02:40.585Z,1516737760.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:40.980Z,1516737760.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:02:40.981Z,1516737760.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:41.365Z,1516737761.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:02:41.366Z,1516737761.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:41.770Z,1516737761.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:02:41.771Z,1516737761.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:42.168Z,1516737762.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:02:42.169Z,1516737762.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:42.571Z,1516737762.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:02:42.572Z,1516737762.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:42.988Z,1516737762.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:02:42.989Z,1516737762.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:43.381Z,1516737763.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:02:43.382Z,1516737763.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:43.789Z,1516737763.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:02:43.790Z,1516737763.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:44.180Z,1516737764.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:02:44.181Z,1516737764.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:44.553Z,1516737764.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:02:44.554Z,1516737764.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:44.976Z,1516737764.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:02:44.977Z,1516737764.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:45.366Z,1516737765.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:02:45.367Z,1516737765.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:45.764Z,1516737765.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:02:45.765Z,1516737765.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:46.169Z,1516737766.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:02:46.170Z,1516737766.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:46.598Z,1516737766.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:02:46.603Z,1516737766.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:46.969Z,1516737766.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:02:46.970Z,1516737766.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:47.362Z,1516737767.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:02:47.363Z,1516737767.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:47.775Z,1516737767.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:02:47.776Z,1516737767.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:48.164Z,1516737768.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:02:48.165Z,1516737768.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:48.570Z,1516737768.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:02:48.571Z,1516737768.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:48.970Z,1516737768.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:02:48.971Z,1516737768.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:49.373Z,1516737769.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:02:49.374Z,1516737769.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:49.769Z,1516737769.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:02:49.770Z,1516737769.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:50.161Z,1516737770.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:02:50.162Z,1516737770.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:50.570Z,1516737770.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:02:50.571Z,1516737770.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:50.963Z,1516737770.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:02:50.964Z,1516737770.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:51.368Z,1516737771.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:02:51.368Z,1516737771.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:51.765Z,1516737771.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:02:51.766Z,1516737771.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:52.166Z,1516737772.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:02:52.167Z,1516737772.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:52.574Z,1516737772.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:02:52.575Z,1516737772.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:52.966Z,1516737772.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:02:52.967Z,1516737772.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:53.425Z,1516737773.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T20:02:53.426Z,1516737773.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:53.754Z,1516737773.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:02:53.755Z,1516737773.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:54.154Z,1516737774.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:02:54.155Z,1516737774.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:54.553Z,1516737774.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:02:54.554Z,1516737774.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:54.967Z,1516737774.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:02:54.968Z,1516737774.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:55.370Z,1516737775.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:02:55.371Z,1516737775.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:55.770Z,1516737775.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:02:55.771Z,1516737775.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:56.160Z,1516737776.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:02:56.161Z,1516737776.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:56.552Z,1516737776.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:02:56.553Z,1516737776.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:56.954Z,1516737776.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:02:56.955Z,1516737776.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:57.362Z,1516737777.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:02:57.367Z,1516737777.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:57.760Z,1516737777.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:58.178Z,1516737778.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:58.577Z,1516737778.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:58.973Z,1516737778.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:59.354Z,1516737779.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:02:59.752Z,1516737779.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:00.158Z,1516737780.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:00.557Z,1516737780.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:00.987Z,1516737780.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:01.393Z,1516737781.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:01.783Z,1516737781.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:02.162Z,1516737782.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:02.561Z,1516737782.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:02.964Z,1516737782.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:03.361Z,1516737783.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:03.773Z,1516737783.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:04.167Z,1516737784.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:04.565Z,1516737784.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:04.967Z,1516737784.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:05.367Z,1516737785.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:05.762Z,1516737785.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:06.164Z,1516737786.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:06.576Z,1516737786.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:06.971Z,1516737786.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:07.375Z,1516737787.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:07.769Z,1516737787.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:08.165Z,1516737788.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:08.570Z,1516737788.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:08.962Z,1516737788.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:09.361Z,1516737789.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:09.761Z,1516737789.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:10.170Z,1516737790.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:10.573Z,1516737790.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:10.970Z,1516737790.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:11.366Z,1516737791.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:11.764Z,1516737791.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:12.165Z,1516737792.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:12.569Z,1516737792.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:12.970Z,1516737792.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:16.073Z,1516737796.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:16.229Z,1516737796.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:16.580Z,1516737796.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:16.974Z,1516737796.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:17.376Z,1516737797.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:17.769Z,1516737797.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:18.178Z,1516737798.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:18.579Z,1516737798.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:18.978Z,1516737798.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:19.368Z,1516737799.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:19.777Z,1516737799.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:20.170Z,1516737800.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:20.570Z,1516737800.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:20.985Z,1516737800.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:21.378Z,1516737801.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:21.778Z,1516737801.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:22.177Z,1516737802.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:22.569Z,1516737802.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:22.969Z,1516737802.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:23.370Z,1516737803.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:23.780Z,1516737803.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:24.179Z,1516737804.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:24.583Z,1516737804.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:24.979Z,1516737804.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:25.376Z,1516737805.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:25.781Z,1516737805.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:26.172Z,1516737806.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:26.576Z,1516737806.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:26.989Z,1516737806.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:27.384Z,1516737807.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:27.783Z,1516737807.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:28.177Z,1516737808.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:28.581Z,1516737808.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:28.980Z,1516737808.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:29.379Z,1516737809.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:29.781Z,1516737809.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:30.185Z,1516737810.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:30.585Z,1516737810.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:30.985Z,1516737810.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:31.379Z,1516737811.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:31.779Z,1516737811.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:32.182Z,1516737812.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:32.577Z,1516737812.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:32.988Z,1516737812.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:33.383Z,1516737813.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:33.793Z,1516737813.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:34.185Z,1516737814.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:34.586Z,1516737814.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:34.985Z,1516737814.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:35.385Z,1516737815.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:35.789Z,1516737815.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:36.187Z,1516737816.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:36.593Z,1516737816.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:37.000Z,1516737817.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:37.365Z,1516737817.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:37.773Z,1516737817.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:38.170Z,1516737818.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:38.570Z,1516737818.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:38.998Z,1516737818.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:39.406Z,1516737819.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:39.803Z,1516737819.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:40.173Z,1516737820.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:40.574Z,1516737820.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:40.971Z,1516737820.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:41.370Z,1516737821.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:41.768Z,1516737821.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:42.173Z,1516737822.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:42.586Z,1516737822.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:42.978Z,1516737822.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:43.372Z,1516737823.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:43.772Z,1516737823.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:44.175Z,1516737824.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:44.571Z,1516737824.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:44.981Z,1516737824.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:45.383Z,1516737825.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:45.784Z,1516737825.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:46.181Z,1516737826.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:46.581Z,1516737826.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:46.971Z,1516737826.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:47.389Z,1516737827.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:47.777Z,1516737827.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:48.180Z,1516737828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:48.585Z,1516737828.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:48.982Z,1516737828.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:49.376Z,1516737829.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:49.781Z,1516737829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:50.172Z,1516737830.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:50.570Z,1516737830.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:50.982Z,1516737830.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:51.382Z,1516737831.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:51.789Z,1516737831.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:52.174Z,1516737832.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:52.572Z,1516737832.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:52.985Z,1516737832.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:53.393Z,1516737833.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:53.790Z,1516737833.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:54.200Z,1516737834.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:54.577Z,1516737834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:54.986Z,1516737834.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:55.384Z,1516737835.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:55.785Z,1516737835.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:56.180Z,1516737836.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:56.573Z,1516737836.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:56.975Z,1516737836.975 [PNI_TCM](ERROR): CRC does not match. Expected:0x63676 got:0x61981 2018-01-23T20:03:57.001Z,1516737837.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:57.389Z,1516737837.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:57.785Z,1516737837.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:58.175Z,1516737838.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:58.577Z,1516737838.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:58.994Z,1516737838.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:59.393Z,1516737839.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:03:59.783Z,1516737839.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:00.174Z,1516737840.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:00.580Z,1516737840.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:00.988Z,1516737840.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:01.393Z,1516737841.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:01.790Z,1516737841.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:02.177Z,1516737842.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:02.572Z,1516737842.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:02.984Z,1516737842.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:03.389Z,1516737843.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:03.782Z,1516737843.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:04.175Z,1516737844.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:04.588Z,1516737844.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:04.992Z,1516737844.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:05.392Z,1516737845.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:05.793Z,1516737845.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:06.192Z,1516737846.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:06.585Z,1516737846.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:06.992Z,1516737846.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:07.401Z,1516737847.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:07.794Z,1516737847.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:08.194Z,1516737848.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:08.554Z,1516737848.554 [PNI_TCM](ERROR): CRC does not match. Expected:0x9182 got:0x59931 2018-01-23T20:04:08.595Z,1516737848.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:08.987Z,1516737848.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x16734 got:0x107 2018-01-23T20:04:09.013Z,1516737849.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:09.398Z,1516737849.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:09.790Z,1516737849.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:10.192Z,1516737850.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:10.596Z,1516737850.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:11.000Z,1516737851.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:11.401Z,1516737851.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:11.793Z,1516737851.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:12.197Z,1516737852.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:12.592Z,1516737852.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:12.996Z,1516737852.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:16.092Z,1516737856.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:16.242Z,1516737856.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:16.585Z,1516737856.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:16.969Z,1516737856.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:17.393Z,1516737857.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:17.765Z,1516737857.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:18.171Z,1516737858.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:18.571Z,1516737858.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:18.994Z,1516737858.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:19.361Z,1516737859.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:19.768Z,1516737859.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:20.176Z,1516737860.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:20.565Z,1516737860.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:20.965Z,1516737860.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:21.375Z,1516737861.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:21.774Z,1516737861.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:22.189Z,1516737862.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:22.565Z,1516737862.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:22.961Z,1516737862.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:23.368Z,1516737863.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:23.762Z,1516737863.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:24.176Z,1516737864.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:24.570Z,1516737864.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:24.973Z,1516737864.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:25.361Z,1516737865.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:25.765Z,1516737865.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:26.165Z,1516737866.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:26.566Z,1516737866.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:26.959Z,1516737866.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:27.365Z,1516737867.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:27.785Z,1516737867.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:28.174Z,1516737868.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:28.562Z,1516737868.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:28.964Z,1516737868.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:29.373Z,1516737869.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:29.762Z,1516737869.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:30.182Z,1516737870.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:30.574Z,1516737870.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:30.974Z,1516737870.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:31.364Z,1516737871.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:31.768Z,1516737871.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:32.162Z,1516737872.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:32.573Z,1516737872.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:32.965Z,1516737872.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:33.376Z,1516737873.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:33.775Z,1516737873.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:34.183Z,1516737874.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:34.566Z,1516737874.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:34.970Z,1516737874.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:35.368Z,1516737875.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:35.768Z,1516737875.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:36.183Z,1516737876.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:36.579Z,1516737876.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:36.977Z,1516737876.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:37.375Z,1516737877.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:37.766Z,1516737877.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:37.780Z,1516737877.780 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:04:38.169Z,1516737878.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:38.568Z,1516737878.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:38.953Z,1516737878.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:39.381Z,1516737879.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:39.784Z,1516737879.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:40.188Z,1516737880.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:40.590Z,1516737880.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:40.977Z,1516737880.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:41.360Z,1516737881.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:41.773Z,1516737881.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:42.162Z,1516737882.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:42.592Z,1516737882.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:42.963Z,1516737882.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:43.359Z,1516737883.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:43.759Z,1516737883.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:44.159Z,1516737884.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:44.564Z,1516737884.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:44.956Z,1516737884.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:45.362Z,1516737885.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:45.766Z,1516737885.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:46.163Z,1516737886.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:46.561Z,1516737886.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:46.960Z,1516737886.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:47.360Z,1516737887.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:47.774Z,1516737887.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:48.199Z,1516737888.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:48.567Z,1516737888.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:48.982Z,1516737888.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:49.377Z,1516737889.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:49.763Z,1516737889.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:50.174Z,1516737890.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:50.573Z,1516737890.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:50.974Z,1516737890.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:51.374Z,1516737891.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:51.780Z,1516737891.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:52.181Z,1516737892.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:52.561Z,1516737892.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:52.980Z,1516737892.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:53.368Z,1516737893.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:53.771Z,1516737893.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:54.182Z,1516737894.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:54.576Z,1516737894.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:54.983Z,1516737894.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:55.372Z,1516737895.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:55.765Z,1516737895.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:56.152Z,1516737896.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:56.585Z,1516737896.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:56.950Z,1516737896.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:57.385Z,1516737897.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:57.790Z,1516737897.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:58.183Z,1516737898.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:58.580Z,1516737898.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:58.957Z,1516737898.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:59.362Z,1516737899.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:04:59.761Z,1516737899.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:00.195Z,1516737900.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:00.563Z,1516737900.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:00.967Z,1516737900.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:01.361Z,1516737901.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:01.760Z,1516737901.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:02.160Z,1516737902.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:02.561Z,1516737902.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:02.957Z,1516737902.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:03.364Z,1516737903.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:03.769Z,1516737903.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:04.165Z,1516737904.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:04.566Z,1516737904.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:04.969Z,1516737904.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:05.369Z,1516737905.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:05.765Z,1516737905.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:06.166Z,1516737906.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:06.596Z,1516737906.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:06.973Z,1516737906.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:07.368Z,1516737907.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:07.769Z,1516737907.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:08.169Z,1516737908.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:08.561Z,1516737908.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:08.960Z,1516737908.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:09.398Z,1516737909.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:09.776Z,1516737909.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:10.170Z,1516737910.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:10.568Z,1516737910.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:10.977Z,1516737910.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:11.365Z,1516737911.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:11.768Z,1516737911.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:12.177Z,1516737912.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:12.579Z,1516737912.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:12.981Z,1516737912.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:13.365Z,1516737913.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:16.512Z,1516737916.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:16.649Z,1516737916.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:16.987Z,1516737916.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:17.393Z,1516737917.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:17.796Z,1516737917.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:18.191Z,1516737918.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:18.581Z,1516737918.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:18.986Z,1516737918.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:19.396Z,1516737919.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:19.790Z,1516737919.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:20.201Z,1516737920.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:20.577Z,1516737920.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:20.981Z,1516737920.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:21.378Z,1516737921.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:21.784Z,1516737921.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:22.202Z,1516737922.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:22.590Z,1516737922.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:22.986Z,1516737922.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:23.388Z,1516737923.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:23.390Z,1516737923.390 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:23.390Z,1516737923.390 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 335 2018-01-23T20:05:23.391Z,1516737923.391 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:05:23.402Z,1516737923.402 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:05:23.777Z,1516737923.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:23.790Z,1516737923.790 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:05:23.790Z,1516737923.790 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 335 2018-01-23T20:05:24.184Z,1516737924.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:24.185Z,1516737924.185 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:05:24.185Z,1516737924.185 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:05:24.186Z,1516737924.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:05:24.592Z,1516737924.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:24.974Z,1516737924.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:25.388Z,1516737925.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:25.793Z,1516737925.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:26.188Z,1516737926.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:26.583Z,1516737926.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:26.990Z,1516737926.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:27.387Z,1516737927.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:27.788Z,1516737927.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:28.204Z,1516737928.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:28.593Z,1516737928.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:29.005Z,1516737929.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:29.398Z,1516737929.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:29.796Z,1516737929.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:30.177Z,1516737930.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:30.576Z,1516737930.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:30.974Z,1516737930.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:31.382Z,1516737931.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:31.786Z,1516737931.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:32.179Z,1516737932.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:32.575Z,1516737932.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:32.977Z,1516737932.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:33.378Z,1516737933.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:33.781Z,1516737933.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:34.178Z,1516737934.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:34.582Z,1516737934.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:34.978Z,1516737934.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:35.386Z,1516737935.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:35.779Z,1516737935.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:36.185Z,1516737936.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:36.578Z,1516737936.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:36.978Z,1516737936.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:37.392Z,1516737937.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:37.790Z,1516737937.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:38.207Z,1516737938.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:38.207Z,1516737938.207 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 335 2018-01-23T20:05:38.207Z,1516737938.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:05:38.209Z,1516737938.209 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:38.209Z,1516737938.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 335 2018-01-23T20:05:38.209Z,1516737938.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:05:38.230Z,1516737938.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:05:38.236Z,1516737938.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:05:38.608Z,1516737938.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:05:38.608Z,1516737938.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 335 2018-01-23T20:05:38.609Z,1516737938.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:05:38.609Z,1516737938.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 335 2018-01-23T20:05:38.988Z,1516737938.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:05:38.988Z,1516737938.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:05:38.988Z,1516737938.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:05:38.989Z,1516737938.989 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:05:38.989Z,1516737938.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:05:38.989Z,1516737938.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:05:39.388Z,1516737939.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:05:39.389Z,1516737939.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:39.785Z,1516737939.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:05:39.786Z,1516737939.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:40.195Z,1516737940.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:05:40.196Z,1516737940.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:40.596Z,1516737940.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:05:40.597Z,1516737940.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:41.002Z,1516737941.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:05:41.003Z,1516737941.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:41.368Z,1516737941.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:05:41.369Z,1516737941.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:41.768Z,1516737941.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:05:41.769Z,1516737941.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:42.198Z,1516737942.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:05:42.200Z,1516737942.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:42.573Z,1516737942.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:05:42.574Z,1516737942.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:42.976Z,1516737942.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:05:42.977Z,1516737942.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:43.383Z,1516737943.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:05:43.384Z,1516737943.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:43.811Z,1516737943.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:05:43.812Z,1516737943.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:44.184Z,1516737944.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:05:44.185Z,1516737944.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:44.576Z,1516737944.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:05:44.577Z,1516737944.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:44.977Z,1516737944.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:05:44.978Z,1516737944.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:45.377Z,1516737945.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:05:45.378Z,1516737945.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:45.784Z,1516737945.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:05:45.785Z,1516737945.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:46.186Z,1516737946.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:05:46.188Z,1516737946.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:46.585Z,1516737946.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:05:46.586Z,1516737946.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:46.985Z,1516737946.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:05:46.986Z,1516737946.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:47.377Z,1516737947.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:05:47.378Z,1516737947.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:47.779Z,1516737947.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:05:47.780Z,1516737947.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:48.183Z,1516737948.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:05:48.184Z,1516737948.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:48.577Z,1516737948.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:05:48.578Z,1516737948.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:48.975Z,1516737948.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:05:48.976Z,1516737948.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:49.386Z,1516737949.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:05:49.387Z,1516737949.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:49.785Z,1516737949.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:05:49.786Z,1516737949.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:50.192Z,1516737950.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:05:50.193Z,1516737950.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:50.588Z,1516737950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:05:50.589Z,1516737950.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:50.984Z,1516737950.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:05:50.985Z,1516737950.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:51.382Z,1516737951.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:05:51.383Z,1516737951.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:51.783Z,1516737951.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:05:51.784Z,1516737951.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:52.197Z,1516737952.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:05:52.198Z,1516737952.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:52.590Z,1516737952.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:05:52.591Z,1516737952.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:52.996Z,1516737952.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:05:52.997Z,1516737952.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:53.391Z,1516737953.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:05:53.392Z,1516737953.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:53.787Z,1516737953.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:05:53.788Z,1516737953.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:54.185Z,1516737954.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:05:54.186Z,1516737954.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:54.589Z,1516737954.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:05:54.590Z,1516737954.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:54.987Z,1516737954.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:05:54.988Z,1516737954.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:55.396Z,1516737955.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:05:55.397Z,1516737955.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:55.791Z,1516737955.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:05:55.792Z,1516737955.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:56.196Z,1516737956.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:05:56.197Z,1516737956.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:56.584Z,1516737956.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:05:56.585Z,1516737956.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:56.994Z,1516737956.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:05:56.995Z,1516737956.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:57.389Z,1516737957.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:05:57.390Z,1516737957.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:57.767Z,1516737957.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:05:57.768Z,1516737957.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:58.197Z,1516737958.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:05:58.198Z,1516737958.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:58.598Z,1516737958.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:59.005Z,1516737959.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:59.380Z,1516737959.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:05:59.785Z,1516737959.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:00.177Z,1516737960.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:00.580Z,1516737960.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:00.976Z,1516737960.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:01.382Z,1516737961.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:01.782Z,1516737961.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:02.185Z,1516737962.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:02.597Z,1516737962.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:02.976Z,1516737962.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:03.381Z,1516737963.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:03.776Z,1516737963.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:04.183Z,1516737964.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:04.582Z,1516737964.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:04.978Z,1516737964.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:05.377Z,1516737965.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:05.777Z,1516737965.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:06.191Z,1516737966.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:06.590Z,1516737966.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:07.000Z,1516737967.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:07.381Z,1516737967.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:07.789Z,1516737967.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:08.190Z,1516737968.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:08.590Z,1516737968.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:09.001Z,1516737969.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:09.381Z,1516737969.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:09.786Z,1516737969.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:10.195Z,1516737970.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:10.590Z,1516737970.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:10.989Z,1516737970.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:11.394Z,1516737971.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:11.777Z,1516737971.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:12.190Z,1516737972.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:12.596Z,1516737972.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:12.988Z,1516737972.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:13.388Z,1516737973.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:16.484Z,1516737976.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:16.629Z,1516737976.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:16.981Z,1516737976.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:17.383Z,1516737977.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:17.760Z,1516737977.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:18.158Z,1516737978.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:18.553Z,1516737978.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:18.953Z,1516737978.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:19.365Z,1516737979.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:19.763Z,1516737979.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:20.162Z,1516737980.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:20.561Z,1516737980.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:20.957Z,1516737980.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:21.356Z,1516737981.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:21.754Z,1516737981.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:22.164Z,1516737982.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:22.567Z,1516737982.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:22.962Z,1516737982.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:23.353Z,1516737983.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:23.757Z,1516737983.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:24.153Z,1516737984.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:24.563Z,1516737984.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:24.966Z,1516737984.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:25.361Z,1516737985.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:25.753Z,1516737985.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:26.153Z,1516737986.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:26.554Z,1516737986.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:26.953Z,1516737986.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:27.366Z,1516737987.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:27.765Z,1516737987.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:28.163Z,1516737988.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:28.554Z,1516737988.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:28.954Z,1516737988.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:29.353Z,1516737989.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:29.755Z,1516737989.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:30.153Z,1516737990.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:30.573Z,1516737990.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:30.973Z,1516737990.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:31.365Z,1516737991.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:31.753Z,1516737991.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:32.158Z,1516737992.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:32.555Z,1516737992.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:32.953Z,1516737992.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:33.366Z,1516737993.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:33.765Z,1516737993.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:34.163Z,1516737994.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:34.553Z,1516737994.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:34.954Z,1516737994.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:35.364Z,1516737995.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:35.754Z,1516737995.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:36.152Z,1516737996.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:36.563Z,1516737996.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:36.965Z,1516737996.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:37.365Z,1516737997.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:37.753Z,1516737997.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:38.154Z,1516737998.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:38.554Z,1516737998.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:38.960Z,1516737998.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:39.373Z,1516737999.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:39.769Z,1516737999.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:40.166Z,1516738000.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:40.553Z,1516738000.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:40.954Z,1516738000.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:41.353Z,1516738001.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:41.757Z,1516738001.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:42.153Z,1516738002.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:42.563Z,1516738002.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:42.965Z,1516738002.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:43.361Z,1516738003.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:43.757Z,1516738003.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:44.156Z,1516738004.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:44.579Z,1516738004.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:44.956Z,1516738004.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:45.362Z,1516738005.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:45.766Z,1516738005.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:46.171Z,1516738006.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:46.556Z,1516738006.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:46.962Z,1516738006.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:47.376Z,1516738007.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:47.769Z,1516738007.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:48.173Z,1516738008.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:48.622Z,1516738008.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:48.986Z,1516738008.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:49.381Z,1516738009.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:49.778Z,1516738009.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:50.186Z,1516738010.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:50.558Z,1516738010.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:50.953Z,1516738010.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:51.380Z,1516738011.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:51.785Z,1516738011.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:52.160Z,1516738012.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:52.553Z,1516738012.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:52.951Z,1516738012.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:53.422Z,1516738013.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:53.769Z,1516738013.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:54.169Z,1516738014.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:54.602Z,1516738014.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:54.978Z,1516738014.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:55.378Z,1516738015.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:55.806Z,1516738015.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:56.178Z,1516738016.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:56.590Z,1516738016.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:57.005Z,1516738017.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:57.394Z,1516738017.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:57.840Z,1516738017.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:58.232Z,1516738018.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:58.585Z,1516738018.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:58.983Z,1516738018.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:59.358Z,1516738019.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:06:59.779Z,1516738019.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:00.189Z,1516738020.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:00.600Z,1516738020.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:00.973Z,1516738020.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:01.374Z,1516738021.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:01.802Z,1516738021.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:02.166Z,1516738022.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:02.583Z,1516738022.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:02.982Z,1516738022.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:03.385Z,1516738023.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:03.784Z,1516738023.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:04.202Z,1516738024.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:04.584Z,1516738024.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:04.985Z,1516738024.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:05.361Z,1516738025.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:05.756Z,1516738025.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:06.173Z,1516738026.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:06.624Z,1516738026.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:06.970Z,1516738026.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:07.381Z,1516738027.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:07.796Z,1516738027.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:08.174Z,1516738028.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:08.583Z,1516738028.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:08.954Z,1516738028.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:09.392Z,1516738029.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:09.794Z,1516738029.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:10.165Z,1516738030.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:10.556Z,1516738030.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:10.951Z,1516738030.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:11.352Z,1516738031.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:11.753Z,1516738031.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:12.151Z,1516738032.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:12.558Z,1516738032.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:12.961Z,1516738032.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:12.964Z,1516738032.964 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:07:12.964Z,1516738032.964 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:07:12.964Z,1516738032.964 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:07:12.964Z,1516738032.964 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:07:13.361Z,1516738033.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:13.364Z,1516738033.364 [Default:CheckIn:D] Stopped 2018-01-23T20:07:13.364Z,1516738033.364 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:07:13.752Z,1516738033.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:13.755Z,1516738033.755 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1009.355078 min 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn:E] Stopped 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn] Stopped 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn](INFO): Running loop #99 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn] Running Loop=99 2018-01-23T20:07:13.756Z,1516738033.756 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:07:13.757Z,1516738033.757 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:07:16.891Z,1516738036.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:17.017Z,1516738037.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:17.396Z,1516738037.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:17.778Z,1516738037.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:18.173Z,1516738038.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:18.566Z,1516738038.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:18.962Z,1516738038.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:19.375Z,1516738039.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:19.766Z,1516738039.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:20.162Z,1516738040.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:20.573Z,1516738040.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:20.970Z,1516738040.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:21.371Z,1516738041.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:21.773Z,1516738041.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:22.168Z,1516738042.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:22.565Z,1516738042.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:22.965Z,1516738042.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:23.404Z,1516738043.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:23.774Z,1516738043.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:24.169Z,1516738044.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:24.569Z,1516738044.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:24.965Z,1516738044.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:25.369Z,1516738045.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:25.764Z,1516738045.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:26.165Z,1516738046.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:26.577Z,1516738046.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:26.980Z,1516738046.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:27.374Z,1516738047.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:27.769Z,1516738047.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:28.169Z,1516738048.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:28.570Z,1516738048.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:28.976Z,1516738048.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:29.380Z,1516738049.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:29.774Z,1516738049.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:30.181Z,1516738050.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:30.568Z,1516738050.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:30.963Z,1516738050.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:31.373Z,1516738051.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:31.769Z,1516738051.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:32.169Z,1516738052.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:32.579Z,1516738052.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:32.977Z,1516738052.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:33.380Z,1516738053.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:33.766Z,1516738053.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:34.184Z,1516738054.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:34.577Z,1516738054.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:34.976Z,1516738054.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:35.386Z,1516738055.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:35.782Z,1516738055.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:36.184Z,1516738056.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:36.560Z,1516738056.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:36.953Z,1516738056.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:37.385Z,1516738057.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:37.764Z,1516738057.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:38.157Z,1516738058.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:38.593Z,1516738058.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:38.993Z,1516738058.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:39.392Z,1516738059.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:39.765Z,1516738059.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:40.162Z,1516738060.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:40.566Z,1516738060.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:40.963Z,1516738060.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:41.367Z,1516738061.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:41.771Z,1516738061.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:42.167Z,1516738062.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:42.568Z,1516738062.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:42.962Z,1516738062.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:43.368Z,1516738063.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:43.768Z,1516738063.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:44.162Z,1516738064.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:44.567Z,1516738064.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:44.970Z,1516738064.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:45.366Z,1516738065.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:45.795Z,1516738065.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:46.163Z,1516738066.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:46.565Z,1516738066.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:46.965Z,1516738066.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:47.373Z,1516738067.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:47.778Z,1516738067.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:48.169Z,1516738068.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:48.568Z,1516738068.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:48.966Z,1516738068.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:49.369Z,1516738069.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:49.764Z,1516738069.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:50.165Z,1516738070.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:50.600Z,1516738070.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:50.977Z,1516738070.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:51.370Z,1516738071.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:51.763Z,1516738071.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:52.173Z,1516738072.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:52.573Z,1516738072.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:52.973Z,1516738072.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:53.374Z,1516738073.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:53.777Z,1516738073.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:54.177Z,1516738074.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:54.577Z,1516738074.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:54.969Z,1516738074.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:55.373Z,1516738075.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:55.773Z,1516738075.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:56.167Z,1516738076.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:56.574Z,1516738076.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:56.985Z,1516738076.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:57.378Z,1516738077.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:57.766Z,1516738077.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:58.179Z,1516738078.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:58.568Z,1516738078.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:58.977Z,1516738078.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:59.378Z,1516738079.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:07:59.776Z,1516738079.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:00.178Z,1516738080.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:00.577Z,1516738080.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:00.973Z,1516738080.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:01.373Z,1516738081.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:01.771Z,1516738081.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:02.171Z,1516738082.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:02.589Z,1516738082.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:02.989Z,1516738082.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:03.377Z,1516738083.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:03.767Z,1516738083.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:04.170Z,1516738084.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:04.573Z,1516738084.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:04.974Z,1516738084.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:05.389Z,1516738085.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:05.786Z,1516738085.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:06.189Z,1516738086.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:06.576Z,1516738086.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:06.977Z,1516738086.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:07.389Z,1516738087.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:07.789Z,1516738087.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:08.185Z,1516738088.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:08.579Z,1516738088.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:08.989Z,1516738088.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:09.391Z,1516738089.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:09.793Z,1516738089.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:10.195Z,1516738090.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:10.586Z,1516738090.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:10.967Z,1516738090.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:11.369Z,1516738091.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:11.771Z,1516738091.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:12.172Z,1516738092.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:12.568Z,1516738092.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:12.967Z,1516738092.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:13.370Z,1516738093.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:13.772Z,1516738093.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:16.898Z,1516738096.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:17.016Z,1516738097.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:17.370Z,1516738097.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:17.773Z,1516738097.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:18.167Z,1516738098.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:18.570Z,1516738098.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:18.970Z,1516738098.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:19.396Z,1516738099.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:19.759Z,1516738099.759 [PNI_TCM](ERROR): CRC does not match. Expected:0x13154 got:0x1857 2018-01-23T20:08:19.794Z,1516738099.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:20.173Z,1516738100.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:20.570Z,1516738100.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:20.986Z,1516738100.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:21.324Z,1516738101.324 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T20:08:21.324Z,1516738101.324 [NAL9602] Data Fault, FailCount= 2 2018-01-23T20:08:21.324Z,1516738101.324 [NAL9602](ERROR): Data Fault 2018-01-23T20:08:21.392Z,1516738101.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:21.405Z,1516738101.405 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T20:08:21.724Z,1516738101.724 [NAL9602](INFO): Powering down 2018-01-23T20:08:21.775Z,1516738101.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:22.165Z,1516738102.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:22.581Z,1516738102.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:22.611Z,1516738102.611 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T20:08:22.612Z,1516738102.612 [NAL9602] No Fault, FailCount= 2 2018-01-23T20:08:22.956Z,1516738102.956 [PNI_TCM](ERROR): CRC does not match. Expected:0x32030 got:0x17072 2018-01-23T20:08:22.981Z,1516738102.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:23.363Z,1516738103.363 [PNI_TCM](ERROR): CRC does not match. Expected:0x44364 got:0x49773 2018-01-23T20:08:23.382Z,1516738103.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:23.773Z,1516738103.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:24.197Z,1516738104.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:24.199Z,1516738104.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:24.199Z,1516738104.199 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 336 2018-01-23T20:08:24.199Z,1516738104.199 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:08:24.211Z,1516738104.211 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:08:24.578Z,1516738104.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:24.614Z,1516738104.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:08:24.614Z,1516738104.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 336 2018-01-23T20:08:24.967Z,1516738104.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:24.968Z,1516738104.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:08:24.969Z,1516738104.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:08:24.969Z,1516738104.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:08:25.367Z,1516738105.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:25.776Z,1516738105.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:26.167Z,1516738106.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:26.567Z,1516738106.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:26.967Z,1516738106.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:27.377Z,1516738107.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:27.769Z,1516738107.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:28.166Z,1516738108.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:28.572Z,1516738108.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:28.982Z,1516738108.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:29.371Z,1516738109.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:29.771Z,1516738109.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:30.164Z,1516738110.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:30.575Z,1516738110.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:30.972Z,1516738110.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:31.371Z,1516738111.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:31.773Z,1516738111.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:32.181Z,1516738112.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:32.561Z,1516738112.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:32.968Z,1516738112.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:33.369Z,1516738113.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:33.796Z,1516738113.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:34.163Z,1516738114.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:34.568Z,1516738114.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:34.964Z,1516738114.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:35.362Z,1516738115.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:35.763Z,1516738115.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:36.162Z,1516738116.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:36.574Z,1516738116.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:36.999Z,1516738116.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:37.368Z,1516738117.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:37.772Z,1516738117.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:38.166Z,1516738118.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:38.563Z,1516738118.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:38.968Z,1516738118.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:39.376Z,1516738119.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:39.376Z,1516738119.376 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 336 2018-01-23T20:08:39.376Z,1516738119.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:08:39.378Z,1516738119.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:39.378Z,1516738119.378 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 336 2018-01-23T20:08:39.378Z,1516738119.378 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:08:39.415Z,1516738119.415 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:08:39.415Z,1516738119.415 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:08:39.778Z,1516738119.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:08:39.778Z,1516738119.778 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 336 2018-01-23T20:08:39.779Z,1516738119.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:08:39.779Z,1516738119.779 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 336 2018-01-23T20:08:40.161Z,1516738120.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:08:40.162Z,1516738120.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:08:40.162Z,1516738120.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:08:40.162Z,1516738120.162 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:08:40.163Z,1516738120.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:08:40.163Z,1516738120.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:08:40.577Z,1516738120.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:08:40.583Z,1516738120.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:40.960Z,1516738120.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:08:40.961Z,1516738120.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:41.368Z,1516738121.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:08:41.369Z,1516738121.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:41.772Z,1516738121.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:08:41.773Z,1516738121.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:42.172Z,1516738122.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:08:42.173Z,1516738122.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:42.568Z,1516738122.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:08:42.569Z,1516738122.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:42.975Z,1516738122.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:08:42.976Z,1516738122.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:43.366Z,1516738123.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:08:43.371Z,1516738123.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:43.771Z,1516738123.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:08:43.772Z,1516738123.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:44.180Z,1516738124.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:08:44.182Z,1516738124.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:44.568Z,1516738124.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:08:44.569Z,1516738124.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:44.968Z,1516738124.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:08:44.969Z,1516738124.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:45.387Z,1516738125.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:08:45.389Z,1516738125.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:45.766Z,1516738125.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:08:45.767Z,1516738125.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:46.173Z,1516738126.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:08:46.175Z,1516738126.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:46.563Z,1516738126.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:08:46.564Z,1516738126.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:46.963Z,1516738126.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:08:46.964Z,1516738126.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:47.362Z,1516738127.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:08:47.363Z,1516738127.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:47.763Z,1516738127.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:08:47.764Z,1516738127.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:48.163Z,1516738128.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:08:48.164Z,1516738128.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:48.568Z,1516738128.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:08:48.569Z,1516738128.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:48.967Z,1516738128.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:08:48.968Z,1516738128.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:49.364Z,1516738129.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:08:49.365Z,1516738129.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:49.764Z,1516738129.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:08:49.765Z,1516738129.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:50.171Z,1516738130.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:08:50.176Z,1516738130.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:50.566Z,1516738130.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:08:50.567Z,1516738130.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:50.972Z,1516738130.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:08:50.974Z,1516738130.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:51.368Z,1516738131.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:08:51.369Z,1516738131.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:51.766Z,1516738131.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:08:51.767Z,1516738131.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:52.124Z,1516738132.124 [NAL9602](INFO): Powering up NAL9602 2018-01-23T20:08:52.180Z,1516738132.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:08:52.181Z,1516738132.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:52.567Z,1516738132.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:08:52.568Z,1516738132.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:52.965Z,1516738132.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:08:52.966Z,1516738132.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:53.364Z,1516738133.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:08:53.365Z,1516738133.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:53.767Z,1516738133.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:08:53.768Z,1516738133.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:54.172Z,1516738134.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:08:54.172Z,1516738134.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:54.565Z,1516738134.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:08:54.566Z,1516738134.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:54.976Z,1516738134.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:08:54.977Z,1516738134.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:55.375Z,1516738135.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:08:55.376Z,1516738135.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:55.754Z,1516738135.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:08:55.775Z,1516738135.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:56.152Z,1516738136.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:08:56.153Z,1516738136.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:56.555Z,1516738136.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:08:56.556Z,1516738136.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:56.984Z,1516738136.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:08:56.985Z,1516738136.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:57.364Z,1516738137.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:08:57.365Z,1516738137.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:57.761Z,1516738137.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:08:57.762Z,1516738137.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:58.167Z,1516738138.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:08:58.168Z,1516738138.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:58.563Z,1516738138.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:08:58.564Z,1516738138.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:58.963Z,1516738138.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:08:58.964Z,1516738138.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:59.360Z,1516738139.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:08:59.361Z,1516738139.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:08:59.764Z,1516738139.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:00.164Z,1516738140.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:00.564Z,1516738140.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:00.963Z,1516738140.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:01.368Z,1516738141.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:01.773Z,1516738141.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:02.163Z,1516738142.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:02.564Z,1516738142.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:02.969Z,1516738142.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:03.324Z,1516738143.324 [NAL9602](INFO): NAL9602 initialized 2018-01-23T20:09:03.368Z,1516738143.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:03.765Z,1516738143.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:04.169Z,1516738144.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:04.583Z,1516738144.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:04.974Z,1516738144.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:05.373Z,1516738145.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:05.763Z,1516738145.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:06.166Z,1516738146.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:06.573Z,1516738146.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:06.981Z,1516738146.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:07.375Z,1516738147.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:07.773Z,1516738147.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:08.163Z,1516738148.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:08.564Z,1516738148.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:08.972Z,1516738148.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:09.368Z,1516738149.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:09.767Z,1516738149.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:10.183Z,1516738150.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:10.583Z,1516738150.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:10.981Z,1516738150.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:11.365Z,1516738151.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:11.772Z,1516738151.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:12.171Z,1516738152.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:12.574Z,1516738152.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:12.973Z,1516738152.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:13.382Z,1516738153.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:13.786Z,1516738153.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:14.176Z,1516738154.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:17.282Z,1516738157.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:17.438Z,1516738157.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:17.751Z,1516738157.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:18.175Z,1516738158.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:18.551Z,1516738158.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:18.949Z,1516738158.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:19.352Z,1516738159.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:19.748Z,1516738159.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:20.177Z,1516738160.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:20.554Z,1516738160.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:20.977Z,1516738160.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:21.349Z,1516738161.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:21.756Z,1516738161.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:22.150Z,1516738162.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:22.548Z,1516738162.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:22.955Z,1516738162.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:23.354Z,1516738163.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:23.761Z,1516738163.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:24.152Z,1516738164.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:24.548Z,1516738164.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:24.949Z,1516738164.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:25.360Z,1516738165.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:25.752Z,1516738165.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:26.165Z,1516738166.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:26.559Z,1516738166.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:26.961Z,1516738166.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:27.354Z,1516738167.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:27.753Z,1516738167.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:28.156Z,1516738168.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:28.558Z,1516738168.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:28.965Z,1516738168.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:29.369Z,1516738169.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:29.773Z,1516738169.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:30.152Z,1516738170.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:30.556Z,1516738170.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:30.956Z,1516738170.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:31.361Z,1516738171.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:31.756Z,1516738171.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:32.165Z,1516738172.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:32.562Z,1516738172.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:32.965Z,1516738172.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:33.355Z,1516738173.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:33.761Z,1516738173.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:34.151Z,1516738174.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:34.561Z,1516738174.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:34.959Z,1516738174.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:35.394Z,1516738175.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:35.765Z,1516738175.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:36.153Z,1516738176.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:36.554Z,1516738176.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:36.957Z,1516738176.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:37.362Z,1516738177.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:37.757Z,1516738177.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:38.169Z,1516738178.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:38.568Z,1516738178.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:38.969Z,1516738178.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:39.361Z,1516738179.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:39.758Z,1516738179.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:40.151Z,1516738180.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:40.553Z,1516738180.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:40.960Z,1516738180.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:41.373Z,1516738181.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:41.765Z,1516738181.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:42.158Z,1516738182.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:42.561Z,1516738182.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:42.953Z,1516738182.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:43.370Z,1516738183.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:43.765Z,1516738183.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:44.166Z,1516738184.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:44.575Z,1516738184.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:44.966Z,1516738184.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:45.369Z,1516738185.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:45.743Z,1516738185.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:46.149Z,1516738186.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:46.548Z,1516738186.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:46.954Z,1516738186.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:47.355Z,1516738187.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:47.750Z,1516738187.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:48.146Z,1516738188.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:48.548Z,1516738188.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:48.953Z,1516738188.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:49.353Z,1516738189.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:49.748Z,1516738189.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:50.151Z,1516738190.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:50.554Z,1516738190.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:50.951Z,1516738190.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:51.346Z,1516738191.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:51.746Z,1516738191.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:52.148Z,1516738192.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:52.553Z,1516738192.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:52.954Z,1516738192.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:53.365Z,1516738193.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:53.757Z,1516738193.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:54.148Z,1516738194.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:54.553Z,1516738194.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:54.949Z,1516738194.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:55.348Z,1516738195.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:55.749Z,1516738195.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:56.165Z,1516738196.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:56.561Z,1516738196.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:56.965Z,1516738196.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:57.352Z,1516738197.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:57.748Z,1516738197.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:58.157Z,1516738198.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:58.550Z,1516738198.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:58.957Z,1516738198.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:59.373Z,1516738199.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:09:59.762Z,1516738199.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:00.152Z,1516738200.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:00.553Z,1516738200.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:00.953Z,1516738200.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:01.352Z,1516738201.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:01.753Z,1516738201.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:02.159Z,1516738202.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:02.579Z,1516738202.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:02.961Z,1516738202.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:03.365Z,1516738203.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:03.738Z,1516738203.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:04.146Z,1516738204.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:04.544Z,1516738204.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:04.978Z,1516738204.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:05.371Z,1516738205.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:05.771Z,1516738205.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:06.152Z,1516738206.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:06.541Z,1516738206.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:06.953Z,1516738206.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:07.348Z,1516738207.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:07.741Z,1516738207.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:08.151Z,1516738208.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:08.554Z,1516738208.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:08.951Z,1516738208.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:09.347Z,1516738209.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:09.753Z,1516738209.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:10.153Z,1516738210.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:10.549Z,1516738210.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:10.958Z,1516738210.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:11.357Z,1516738211.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:11.758Z,1516738211.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:12.153Z,1516738212.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:12.552Z,1516738212.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:12.956Z,1516738212.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:13.350Z,1516738213.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:13.750Z,1516738213.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:14.161Z,1516738214.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:14.563Z,1516738214.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:17.656Z,1516738217.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:17.800Z,1516738217.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:18.145Z,1516738218.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:18.521Z,1516738218.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:18.943Z,1516738218.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:19.326Z,1516738219.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:19.728Z,1516738219.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:20.121Z,1516738220.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:20.521Z,1516738220.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:20.922Z,1516738220.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:21.326Z,1516738221.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:21.722Z,1516738221.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:22.124Z,1516738222.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:22.520Z,1516738222.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:22.922Z,1516738222.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:23.325Z,1516738223.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:23.722Z,1516738223.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:24.118Z,1516738224.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:24.518Z,1516738224.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:24.922Z,1516738224.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:25.326Z,1516738225.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:25.722Z,1516738225.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:26.121Z,1516738226.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:26.522Z,1516738226.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:26.922Z,1516738226.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:27.349Z,1516738227.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:27.740Z,1516738227.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:28.137Z,1516738228.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:28.537Z,1516738228.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:28.945Z,1516738228.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:29.341Z,1516738229.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:29.740Z,1516738229.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:30.137Z,1516738230.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:30.541Z,1516738230.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:30.938Z,1516738230.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:31.343Z,1516738231.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:31.741Z,1516738231.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:32.137Z,1516738232.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:32.538Z,1516738232.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:32.938Z,1516738232.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:33.344Z,1516738233.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:33.740Z,1516738233.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:34.137Z,1516738234.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:34.516Z,1516738234.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:34.942Z,1516738234.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:35.341Z,1516738235.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:35.738Z,1516738235.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:36.140Z,1516738236.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:36.518Z,1516738236.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:36.930Z,1516738236.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:37.333Z,1516738237.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:37.723Z,1516738237.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:38.119Z,1516738238.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:38.519Z,1516738238.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:38.917Z,1516738238.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:39.325Z,1516738239.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:39.738Z,1516738239.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:40.136Z,1516738240.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:40.556Z,1516738240.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:40.922Z,1516738240.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:41.321Z,1516738241.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:41.721Z,1516738241.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:42.129Z,1516738242.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:42.540Z,1516738242.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:42.932Z,1516738242.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:43.327Z,1516738243.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:43.729Z,1516738243.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:44.125Z,1516738244.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:44.527Z,1516738244.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:44.930Z,1516738244.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:45.336Z,1516738245.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:45.737Z,1516738245.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:46.130Z,1516738246.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:46.523Z,1516738246.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:46.927Z,1516738246.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:47.329Z,1516738247.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:47.729Z,1516738247.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:48.130Z,1516738248.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:48.539Z,1516738248.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:48.932Z,1516738248.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:49.327Z,1516738249.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:49.725Z,1516738249.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:50.132Z,1516738250.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:50.525Z,1516738250.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:50.911Z,1516738250.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:51.343Z,1516738251.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:51.745Z,1516738251.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:52.145Z,1516738252.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:52.541Z,1516738252.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:52.917Z,1516738252.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:53.317Z,1516738253.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:53.720Z,1516738253.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:54.139Z,1516738254.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:54.553Z,1516738254.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:54.922Z,1516738254.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:55.329Z,1516738255.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:55.721Z,1516738255.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:56.119Z,1516738256.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:56.533Z,1516738256.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:56.925Z,1516738256.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:57.330Z,1516738257.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:57.733Z,1516738257.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:58.136Z,1516738258.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:58.525Z,1516738258.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:58.919Z,1516738258.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:59.321Z,1516738259.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:10:59.719Z,1516738259.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:00.133Z,1516738260.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:00.533Z,1516738260.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:00.933Z,1516738260.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:01.321Z,1516738261.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:01.728Z,1516738261.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:02.124Z,1516738262.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:02.521Z,1516738262.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:02.924Z,1516738262.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:03.329Z,1516738263.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:03.737Z,1516738263.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:04.130Z,1516738264.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:04.521Z,1516738264.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:04.920Z,1516738264.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:05.324Z,1516738265.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:05.723Z,1516738265.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:06.129Z,1516738266.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:06.537Z,1516738266.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:06.929Z,1516738266.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:07.321Z,1516738267.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:07.729Z,1516738267.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:08.121Z,1516738268.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:08.525Z,1516738268.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:08.923Z,1516738268.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:09.330Z,1516738269.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:09.734Z,1516738269.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:10.142Z,1516738270.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:10.525Z,1516738270.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:10.925Z,1516738270.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:11.324Z,1516738271.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:11.721Z,1516738271.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:12.140Z,1516738272.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:12.534Z,1516738272.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:12.941Z,1516738272.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:13.333Z,1516738273.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:13.725Z,1516738273.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:14.128Z,1516738274.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:14.522Z,1516738274.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:14.936Z,1516738274.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:18.027Z,1516738278.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:18.174Z,1516738278.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:18.522Z,1516738278.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:18.899Z,1516738278.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:19.293Z,1516738279.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:19.704Z,1516738279.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:20.101Z,1516738280.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:20.502Z,1516738280.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:20.902Z,1516738280.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:21.292Z,1516738281.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:21.692Z,1516738281.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:22.100Z,1516738282.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:22.492Z,1516738282.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:22.894Z,1516738282.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:23.302Z,1516738283.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:23.701Z,1516738283.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:24.105Z,1516738284.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:24.499Z,1516738284.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:24.900Z,1516738284.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:25.305Z,1516738285.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:25.307Z,1516738285.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:25.307Z,1516738285.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 337 2018-01-23T20:11:25.307Z,1516738285.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:11:25.339Z,1516738285.339 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:11:25.700Z,1516738285.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:25.712Z,1516738285.712 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:11:25.712Z,1516738285.712 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 337 2018-01-23T20:11:26.106Z,1516738286.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:26.107Z,1516738286.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:11:26.107Z,1516738286.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:11:26.108Z,1516738286.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:11:26.505Z,1516738286.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:26.910Z,1516738286.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:27.297Z,1516738287.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:27.698Z,1516738287.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:28.100Z,1516738288.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:28.501Z,1516738288.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:28.896Z,1516738288.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:29.304Z,1516738289.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:29.707Z,1516738289.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:30.106Z,1516738290.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:30.499Z,1516738290.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:30.904Z,1516738290.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:31.297Z,1516738291.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:31.699Z,1516738291.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:32.110Z,1516738292.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:32.513Z,1516738292.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:32.905Z,1516738292.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:33.295Z,1516738293.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:33.700Z,1516738293.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:34.099Z,1516738294.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:34.505Z,1516738294.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:34.900Z,1516738294.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:35.310Z,1516738295.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:35.709Z,1516738295.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:36.103Z,1516738296.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:36.509Z,1516738296.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:36.901Z,1516738296.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:37.302Z,1516738297.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:37.707Z,1516738297.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:38.117Z,1516738298.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:38.517Z,1516738298.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:38.915Z,1516738298.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:39.298Z,1516738299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:39.697Z,1516738299.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:40.101Z,1516738300.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:40.495Z,1516738300.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:40.496Z,1516738300.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 337 2018-01-23T20:11:40.496Z,1516738300.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:11:40.497Z,1516738300.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:40.497Z,1516738300.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 337 2018-01-23T20:11:40.498Z,1516738300.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:11:40.530Z,1516738300.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:11:40.530Z,1516738300.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:11:40.907Z,1516738300.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:11:40.907Z,1516738300.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 337 2018-01-23T20:11:40.908Z,1516738300.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:11:40.908Z,1516738300.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 337 2018-01-23T20:11:41.304Z,1516738301.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:11:41.304Z,1516738301.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:11:41.304Z,1516738301.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:11:41.305Z,1516738301.305 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:11:41.305Z,1516738301.305 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:11:41.306Z,1516738301.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:11:41.708Z,1516738301.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:11:41.709Z,1516738301.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:42.101Z,1516738302.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:11:42.102Z,1516738302.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:42.498Z,1516738302.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:11:42.499Z,1516738302.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:42.894Z,1516738302.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:11:42.895Z,1516738302.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:43.295Z,1516738303.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:11:43.296Z,1516738303.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:43.699Z,1516738303.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:11:43.700Z,1516738303.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:44.105Z,1516738304.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:11:44.106Z,1516738304.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:44.507Z,1516738304.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:11:44.508Z,1516738304.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:44.906Z,1516738304.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:11:44.912Z,1516738304.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:45.299Z,1516738305.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:11:45.300Z,1516738305.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:45.698Z,1516738305.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:11:45.699Z,1516738305.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:46.115Z,1516738306.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:11:46.116Z,1516738306.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:46.510Z,1516738306.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:11:46.511Z,1516738306.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:46.906Z,1516738306.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:11:46.911Z,1516738306.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:47.308Z,1516738307.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:11:47.309Z,1516738307.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:47.702Z,1516738307.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:11:47.703Z,1516738307.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:48.105Z,1516738308.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:11:48.106Z,1516738308.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:48.514Z,1516738308.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:11:48.519Z,1516738308.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:48.912Z,1516738308.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:11:48.913Z,1516738308.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:49.301Z,1516738309.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:11:49.302Z,1516738309.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:49.679Z,1516738309.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x60990 got:0x18977 2018-01-23T20:11:49.703Z,1516738309.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:11:49.704Z,1516738309.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:50.120Z,1516738310.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:11:50.121Z,1516738310.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:50.511Z,1516738310.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:11:50.512Z,1516738310.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:50.911Z,1516738310.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:11:50.912Z,1516738310.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:51.308Z,1516738311.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:11:51.309Z,1516738311.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:51.694Z,1516738311.694 [PNI_TCM](ERROR): CRC does not match. Expected:0x5540 got:0x27975 2018-01-23T20:11:51.720Z,1516738311.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:11:51.721Z,1516738311.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:52.110Z,1516738312.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:11:52.111Z,1516738312.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:52.522Z,1516738312.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:11:52.523Z,1516738312.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:52.917Z,1516738312.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:11:52.918Z,1516738312.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:53.301Z,1516738313.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:11:53.302Z,1516738313.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:53.705Z,1516738313.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:11:53.706Z,1516738313.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:54.120Z,1516738314.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:11:54.121Z,1516738314.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:54.527Z,1516738314.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:11:54.528Z,1516738314.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:54.914Z,1516738314.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:11:54.915Z,1516738314.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:55.294Z,1516738315.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:11:55.311Z,1516738315.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:55.713Z,1516738315.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:11:55.714Z,1516738315.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:56.119Z,1516738316.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:11:56.119Z,1516738316.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:56.514Z,1516738316.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:11:56.516Z,1516738316.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:56.914Z,1516738316.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:11:56.915Z,1516738316.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:57.316Z,1516738317.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:11:57.317Z,1516738317.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:57.695Z,1516738317.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:11:57.696Z,1516738317.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:58.100Z,1516738318.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:11:58.101Z,1516738318.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:58.504Z,1516738318.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:11:58.505Z,1516738318.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:58.917Z,1516738318.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:11:58.918Z,1516738318.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:59.296Z,1516738319.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:11:59.297Z,1516738319.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:11:59.695Z,1516738319.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:11:59.696Z,1516738319.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:00.104Z,1516738320.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:12:00.105Z,1516738320.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:00.529Z,1516738320.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:00.913Z,1516738320.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:01.300Z,1516738321.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:01.696Z,1516738321.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:02.127Z,1516738322.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:02.505Z,1516738322.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:02.903Z,1516738322.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:03.305Z,1516738323.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:03.712Z,1516738323.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:04.105Z,1516738324.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:04.505Z,1516738324.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:04.905Z,1516738324.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:05.325Z,1516738325.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:05.705Z,1516738325.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:06.106Z,1516738326.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:06.509Z,1516738326.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:06.917Z,1516738326.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:07.304Z,1516738327.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:07.706Z,1516738327.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:08.117Z,1516738328.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:08.525Z,1516738328.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:08.917Z,1516738328.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:09.304Z,1516738329.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:09.700Z,1516738329.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:10.124Z,1516738330.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:10.515Z,1516738330.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:10.908Z,1516738330.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:11.304Z,1516738331.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:11.709Z,1516738331.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:12.112Z,1516738332.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:12.510Z,1516738332.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:12.913Z,1516738332.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:13.305Z,1516738333.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:13.705Z,1516738333.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:14.111Z,1516738334.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:14.114Z,1516738334.114 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:07:13.8Z 2018-01-23T20:12:14.115Z,1516738334.115 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:12:14.115Z,1516738334.115 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:12:14.521Z,1516738334.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:15.052Z,1516738335.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:15.320Z,1516738335.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:18.402Z,1516738338.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:18.482Z,1516738338.482 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0396.lzma 2018-01-23T20:12:18.549Z,1516738338.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:18.870Z,1516738338.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:19.227Z,1516738339.227 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0396.lzma.bak 2018-01-23T20:12:19.227Z,1516738339.227 [DataOverHttps](INFO): SBD MOMSN=7756571 2018-01-23T20:12:19.318Z,1516738339.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:19.927Z,1516738339.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:20.103Z,1516738340.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:23.170Z,1516738343.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:23.305Z,1516738343.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:23.665Z,1516738343.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:24.068Z,1516738344.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:24.455Z,1516738344.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:24.858Z,1516738344.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:27.932Z,1516738347.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:28.007Z,1516738348.007 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0397.lzma 2018-01-23T20:12:28.072Z,1516738348.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:28.459Z,1516738348.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:28.786Z,1516738348.786 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0397.lzma.bak 2018-01-23T20:12:28.786Z,1516738348.786 [DataOverHttps](INFO): SBD MOMSN=7756573 2018-01-23T20:12:28.863Z,1516738348.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:29.486Z,1516738349.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:29.489Z,1516738349.489 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:12:29.489Z,1516738349.489 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:12:29.490Z,1516738349.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:12:29.645Z,1516738349.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:32.727Z,1516738352.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:32.861Z,1516738352.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:33.221Z,1516738353.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:33.624Z,1516738353.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:33.995Z,1516738353.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:34.392Z,1516738354.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:34.799Z,1516738354.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:35.197Z,1516738355.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:35.594Z,1516738355.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:35.999Z,1516738355.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:36.399Z,1516738356.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:36.799Z,1516738356.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:37.198Z,1516738357.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:37.592Z,1516738357.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:37.997Z,1516738357.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:38.396Z,1516738358.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:38.790Z,1516738358.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:39.201Z,1516738359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:39.602Z,1516738359.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:40.001Z,1516738360.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:40.395Z,1516738360.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:40.792Z,1516738360.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:41.191Z,1516738361.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:41.594Z,1516738361.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:42.001Z,1516738362.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:42.399Z,1516738362.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:42.799Z,1516738362.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:43.201Z,1516738363.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:43.596Z,1516738363.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:43.990Z,1516738363.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:44.399Z,1516738364.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:44.797Z,1516738364.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:45.209Z,1516738365.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:45.610Z,1516738365.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:46.002Z,1516738366.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:46.392Z,1516738366.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:46.796Z,1516738366.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:47.199Z,1516738367.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:47.599Z,1516738367.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:48.006Z,1516738368.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:48.402Z,1516738368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:48.813Z,1516738368.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:49.206Z,1516738369.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:49.599Z,1516738369.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:49.999Z,1516738369.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:50.406Z,1516738370.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:50.801Z,1516738370.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:51.202Z,1516738371.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:51.613Z,1516738371.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:52.002Z,1516738372.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:52.461Z,1516738372.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:52.797Z,1516738372.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:53.202Z,1516738373.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:53.613Z,1516738373.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:54.006Z,1516738374.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:54.399Z,1516738374.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:54.799Z,1516738374.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:55.203Z,1516738375.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:55.613Z,1516738375.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:56.013Z,1516738376.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:56.397Z,1516738376.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:56.801Z,1516738376.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:57.223Z,1516738377.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:57.611Z,1516738377.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:58.003Z,1516738378.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:58.409Z,1516738378.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:58.817Z,1516738378.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:59.219Z,1516738379.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:12:59.617Z,1516738379.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:00.109Z,1516738380.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:00.417Z,1516738380.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:00.801Z,1516738380.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:01.223Z,1516738381.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:01.599Z,1516738381.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:02.029Z,1516738382.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:02.393Z,1516738382.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:02.792Z,1516738382.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:03.196Z,1516738383.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:03.592Z,1516738383.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:03.997Z,1516738383.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:04.401Z,1516738384.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:04.796Z,1516738384.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:05.201Z,1516738385.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:05.597Z,1516738385.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:05.992Z,1516738385.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:06.393Z,1516738386.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:06.791Z,1516738386.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:07.205Z,1516738387.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:07.602Z,1516738387.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:08.005Z,1516738388.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:08.396Z,1516738388.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:08.797Z,1516738388.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:09.205Z,1516738389.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:09.601Z,1516738389.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:10.005Z,1516738390.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:10.396Z,1516738390.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:10.796Z,1516738390.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:11.201Z,1516738391.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:11.606Z,1516738391.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:12.002Z,1516738392.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:12.393Z,1516738392.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:12.805Z,1516738392.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:13.202Z,1516738393.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:13.602Z,1516738393.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:14.002Z,1516738394.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:14.393Z,1516738394.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:14.793Z,1516738394.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:15.203Z,1516738395.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:15.602Z,1516738395.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:16.002Z,1516738396.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:16.394Z,1516738396.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:16.792Z,1516738396.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:17.202Z,1516738397.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:17.605Z,1516738397.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:18.019Z,1516738398.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:18.400Z,1516738398.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:18.800Z,1516738398.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:19.207Z,1516738399.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:19.606Z,1516738399.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:20.004Z,1516738400.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:20.409Z,1516738400.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:20.797Z,1516738400.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:21.203Z,1516738401.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:21.615Z,1516738401.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:22.003Z,1516738402.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:22.394Z,1516738402.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:22.811Z,1516738402.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:23.213Z,1516738403.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:23.617Z,1516738403.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:24.005Z,1516738404.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:24.402Z,1516738404.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:24.801Z,1516738404.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:25.208Z,1516738405.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:25.617Z,1516738405.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:26.012Z,1516738406.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:26.405Z,1516738406.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:26.803Z,1516738406.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:27.213Z,1516738407.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:27.607Z,1516738407.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:28.005Z,1516738408.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:28.403Z,1516738408.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:28.805Z,1516738408.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:29.203Z,1516738409.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:29.612Z,1516738409.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:30.007Z,1516738410.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:33.118Z,1516738413.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:33.253Z,1516738413.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:33.605Z,1516738413.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:34.017Z,1516738414.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:34.411Z,1516738414.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:34.809Z,1516738414.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:35.214Z,1516738415.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:35.619Z,1516738415.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:36.024Z,1516738416.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:36.416Z,1516738416.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:36.811Z,1516738416.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:37.211Z,1516738417.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:37.609Z,1516738417.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:38.015Z,1516738418.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:38.414Z,1516738418.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:38.830Z,1516738418.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:39.221Z,1516738419.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:39.592Z,1516738419.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:39.992Z,1516738419.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:40.400Z,1516738420.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:40.797Z,1516738420.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:41.209Z,1516738421.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:41.603Z,1516738421.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:42.006Z,1516738422.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:42.411Z,1516738422.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:42.799Z,1516738422.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:43.200Z,1516738423.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:43.600Z,1516738423.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:44.008Z,1516738424.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:44.435Z,1516738424.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:44.809Z,1516738424.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:45.209Z,1516738425.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:45.599Z,1516738425.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:45.000Z,1516738426.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:46.399Z,1516738426.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:46.801Z,1516738426.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:47.199Z,1516738427.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:47.610Z,1516738427.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:48.013Z,1516738428.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:48.409Z,1516738428.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:48.799Z,1516738428.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:49.201Z,1516738429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:49.600Z,1516738429.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:50.001Z,1516738430.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:50.410Z,1516738430.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:50.809Z,1516738430.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:51.217Z,1516738431.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:51.603Z,1516738431.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:52.001Z,1516738432.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:52.405Z,1516738432.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:52.802Z,1516738432.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:53.210Z,1516738433.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:53.609Z,1516738433.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:54.015Z,1516738434.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:54.410Z,1516738434.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:54.801Z,1516738434.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:55.202Z,1516738435.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:55.601Z,1516738435.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:56.003Z,1516738436.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:56.410Z,1516738436.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:56.809Z,1516738436.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:57.217Z,1516738437.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:57.604Z,1516738437.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:58.002Z,1516738438.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:58.402Z,1516738438.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:58.816Z,1516738438.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:59.200Z,1516738439.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:13:59.610Z,1516738439.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:00.017Z,1516738440.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:00.421Z,1516738440.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:00.809Z,1516738440.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:01.202Z,1516738441.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:01.604Z,1516738441.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:02.003Z,1516738442.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:02.440Z,1516738442.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:02.821Z,1516738442.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:03.217Z,1516738443.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:03.609Z,1516738443.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:03.000Z,1516738444.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:04.405Z,1516738444.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:04.801Z,1516738444.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:05.201Z,1516738445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:05.617Z,1516738445.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:06.013Z,1516738446.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:06.421Z,1516738446.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:06.809Z,1516738446.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:07.209Z,1516738447.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:07.600Z,1516738447.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:08.003Z,1516738448.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:08.409Z,1516738448.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:08.813Z,1516738448.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:09.209Z,1516738449.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:09.601Z,1516738449.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:10.019Z,1516738450.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:10.409Z,1516738450.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:10.802Z,1516738450.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:11.200Z,1516738451.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:11.617Z,1516738451.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:12.017Z,1516738452.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:12.413Z,1516738452.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:12.809Z,1516738452.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:13.205Z,1516738453.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:13.604Z,1516738453.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:13.999Z,1516738453.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:14.409Z,1516738454.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:14.821Z,1516738454.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:15.221Z,1516738455.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:15.609Z,1516738455.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:16.013Z,1516738456.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:16.403Z,1516738456.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:16.801Z,1516738456.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:17.204Z,1516738457.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:17.613Z,1516738457.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:18.014Z,1516738458.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:18.411Z,1516738458.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:18.802Z,1516738458.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:19.210Z,1516738459.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:19.602Z,1516738459.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:20.002Z,1516738460.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:20.410Z,1516738460.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:20.821Z,1516738460.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:21.221Z,1516738461.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:21.609Z,1516738461.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:22.005Z,1516738462.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:22.409Z,1516738462.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:22.808Z,1516738462.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:23.204Z,1516738463.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:23.618Z,1516738463.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:24.013Z,1516738464.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:24.410Z,1516738464.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:24.801Z,1516738464.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:25.201Z,1516738465.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:25.604Z,1516738465.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:26.007Z,1516738466.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:26.410Z,1516738466.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:26.412Z,1516738466.412 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:26.412Z,1516738466.412 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 338 2018-01-23T20:14:26.412Z,1516738466.412 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:14:26.425Z,1516738466.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:14:26.821Z,1516738466.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:26.833Z,1516738466.833 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:14:26.833Z,1516738466.833 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 338 2018-01-23T20:14:27.211Z,1516738467.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:27.212Z,1516738467.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:14:27.213Z,1516738467.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:14:27.213Z,1516738467.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:14:27.612Z,1516738467.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:28.011Z,1516738468.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:28.397Z,1516738468.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:28.807Z,1516738468.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:29.209Z,1516738469.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:29.613Z,1516738469.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:30.029Z,1516738470.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:33.123Z,1516738473.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:33.260Z,1516738473.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:33.633Z,1516738473.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:34.028Z,1516738474.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:34.437Z,1516738474.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:34.834Z,1516738474.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:35.232Z,1516738475.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:35.622Z,1516738475.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:36.022Z,1516738476.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:36.421Z,1516738476.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:36.822Z,1516738476.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:37.233Z,1516738477.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:37.631Z,1516738477.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:38.034Z,1516738478.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:38.064Z,1516738478.064 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:14:38.441Z,1516738478.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:38.825Z,1516738478.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:39.225Z,1516738479.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:39.626Z,1516738479.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:40.033Z,1516738480.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:40.434Z,1516738480.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:40.833Z,1516738480.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:41.242Z,1516738481.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:41.667Z,1516738481.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:41.667Z,1516738481.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 338 2018-01-23T20:14:41.667Z,1516738481.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:14:41.669Z,1516738481.669 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:41.669Z,1516738481.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 338 2018-01-23T20:14:41.669Z,1516738481.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:14:41.682Z,1516738481.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:14:41.682Z,1516738481.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:14:42.043Z,1516738482.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:14:42.043Z,1516738482.043 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 338 2018-01-23T20:14:42.043Z,1516738482.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:14:42.043Z,1516738482.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 338 2018-01-23T20:14:42.433Z,1516738482.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:14:42.433Z,1516738482.433 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:14:42.434Z,1516738482.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:14:42.434Z,1516738482.434 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:14:42.434Z,1516738482.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:14:42.435Z,1516738482.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:14:42.820Z,1516738482.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:14:42.821Z,1516738482.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:43.235Z,1516738483.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:14:43.236Z,1516738483.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:43.641Z,1516738483.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:14:43.642Z,1516738483.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:44.032Z,1516738484.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:14:44.033Z,1516738484.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:44.439Z,1516738484.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:14:44.440Z,1516738484.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:44.840Z,1516738484.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:14:44.841Z,1516738484.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:45.208Z,1516738485.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s. 2018-01-23T20:14:45.209Z,1516738485.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:45.611Z,1516738485.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s. 2018-01-23T20:14:45.612Z,1516738485.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:46.020Z,1516738486.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:14:46.021Z,1516738486.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:46.422Z,1516738486.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:14:46.439Z,1516738486.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:46.843Z,1516738486.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:14:46.844Z,1516738486.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:47.243Z,1516738487.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:14:47.244Z,1516738487.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:47.620Z,1516738487.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:14:47.621Z,1516738487.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:48.018Z,1516738488.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:14:48.019Z,1516738488.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:48.426Z,1516738488.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:14:48.427Z,1516738488.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:48.816Z,1516738488.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:14:48.817Z,1516738488.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:49.218Z,1516738489.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:14:49.219Z,1516738489.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:49.625Z,1516738489.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:14:49.626Z,1516738489.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:50.021Z,1516738490.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:14:50.022Z,1516738490.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:50.421Z,1516738490.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:14:50.422Z,1516738490.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:50.818Z,1516738490.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:14:50.819Z,1516738490.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:51.224Z,1516738491.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:14:51.225Z,1516738491.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:51.618Z,1516738491.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:14:51.619Z,1516738491.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:52.039Z,1516738492.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:14:52.040Z,1516738492.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:52.422Z,1516738492.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:14:52.423Z,1516738492.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:52.833Z,1516738492.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:14:52.834Z,1516738492.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:53.232Z,1516738493.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:14:53.233Z,1516738493.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:53.618Z,1516738493.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:14:53.619Z,1516738493.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:54.027Z,1516738494.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:14:54.028Z,1516738494.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:54.423Z,1516738494.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:14:54.424Z,1516738494.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:54.820Z,1516738494.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:14:54.821Z,1516738494.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:55.224Z,1516738495.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:14:55.225Z,1516738495.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:55.625Z,1516738495.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:14:55.626Z,1516738495.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:56.025Z,1516738496.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:14:56.026Z,1516738496.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:56.428Z,1516738496.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:14:56.429Z,1516738496.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:56.824Z,1516738496.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:14:56.825Z,1516738496.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:57.219Z,1516738497.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:14:57.220Z,1516738497.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:57.628Z,1516738497.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:14:57.629Z,1516738497.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:58.019Z,1516738498.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:14:58.020Z,1516738498.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:58.438Z,1516738498.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:14:58.459Z,1516738498.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:58.833Z,1516738498.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:14:58.834Z,1516738498.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:59.229Z,1516738499.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:14:59.230Z,1516738499.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:14:59.621Z,1516738499.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:14:59.622Z,1516738499.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:00.029Z,1516738500.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:15:00.030Z,1516738500.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:00.427Z,1516738500.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:15:00.428Z,1516738500.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:00.826Z,1516738500.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:15:00.827Z,1516738500.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:01.219Z,1516738501.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:15:01.220Z,1516738501.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:01.630Z,1516738501.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:15:01.631Z,1516738501.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:02.029Z,1516738502.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:02.431Z,1516738502.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:02.820Z,1516738502.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:03.225Z,1516738503.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:03.629Z,1516738503.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:04.020Z,1516738504.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:04.433Z,1516738504.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:04.834Z,1516738504.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:05.233Z,1516738505.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:05.628Z,1516738505.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:06.021Z,1516738506.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:06.428Z,1516738506.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:06.828Z,1516738506.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:07.227Z,1516738507.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:07.631Z,1516738507.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:08.049Z,1516738508.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:08.442Z,1516738508.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:08.821Z,1516738508.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:09.221Z,1516738509.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:09.622Z,1516738509.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:10.023Z,1516738510.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:10.447Z,1516738510.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:10.851Z,1516738510.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:11.225Z,1516738511.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:11.624Z,1516738511.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:12.033Z,1516738512.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:12.427Z,1516738512.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:12.828Z,1516738512.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:13.222Z,1516738513.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:13.637Z,1516738513.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:14.030Z,1516738514.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:14.430Z,1516738514.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:14.823Z,1516738514.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:15.222Z,1516738515.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:15.625Z,1516738515.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:16.024Z,1516738516.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:16.439Z,1516738516.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:16.834Z,1516738516.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:17.238Z,1516738517.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:17.623Z,1516738517.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:18.033Z,1516738518.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:18.426Z,1516738518.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:18.827Z,1516738518.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:19.229Z,1516738519.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:19.629Z,1516738519.629 [PNI_TCM](ERROR): CRC does not match. Expected:0x17244 got:0x49773 2018-01-23T20:15:19.649Z,1516738519.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:20.045Z,1516738520.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:20.438Z,1516738520.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:20.832Z,1516738520.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:21.232Z,1516738521.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:21.631Z,1516738521.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:22.037Z,1516738522.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:22.436Z,1516738522.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:22.836Z,1516738522.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:23.236Z,1516738523.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:23.633Z,1516738523.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:24.029Z,1516738524.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:24.444Z,1516738524.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:24.844Z,1516738524.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:25.238Z,1516738525.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:25.640Z,1516738525.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:26.024Z,1516738526.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:26.437Z,1516738526.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:26.850Z,1516738526.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:27.238Z,1516738527.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:27.637Z,1516738527.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:28.027Z,1516738528.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:28.439Z,1516738528.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:28.842Z,1516738528.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:29.240Z,1516738529.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:29.615Z,1516738529.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:30.043Z,1516738530.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:33.144Z,1516738533.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:33.284Z,1516738533.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:33.637Z,1516738533.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:34.020Z,1516738534.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:34.414Z,1516738534.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:34.817Z,1516738534.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:35.245Z,1516738535.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:35.618Z,1516738535.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:36.022Z,1516738536.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:36.421Z,1516738536.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:36.840Z,1516738536.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:37.216Z,1516738537.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:37.616Z,1516738537.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:38.014Z,1516738538.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:38.420Z,1516738538.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:38.822Z,1516738538.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:39.220Z,1516738539.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:39.617Z,1516738539.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:40.007Z,1516738540.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:40.419Z,1516738540.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:40.829Z,1516738540.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:41.227Z,1516738541.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:41.625Z,1516738541.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:42.013Z,1516738542.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:42.418Z,1516738542.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:42.825Z,1516738542.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:43.229Z,1516738543.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:43.612Z,1516738543.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:44.016Z,1516738544.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:44.423Z,1516738544.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:44.822Z,1516738544.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:45.222Z,1516738545.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:45.613Z,1516738545.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:46.025Z,1516738546.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:46.425Z,1516738546.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:46.822Z,1516738546.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:47.230Z,1516738547.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:47.613Z,1516738547.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:48.016Z,1516738548.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:48.424Z,1516738548.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:48.822Z,1516738548.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:49.219Z,1516738549.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:49.612Z,1516738549.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:50.016Z,1516738550.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:50.425Z,1516738550.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:50.827Z,1516738550.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:51.222Z,1516738551.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:51.616Z,1516738551.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:52.017Z,1516738552.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:52.425Z,1516738552.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:52.829Z,1516738552.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:53.219Z,1516738553.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:53.637Z,1516738553.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:54.014Z,1516738554.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:54.413Z,1516738554.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:54.819Z,1516738554.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:55.230Z,1516738555.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:55.624Z,1516738555.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:56.017Z,1516738556.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:56.419Z,1516738556.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:56.822Z,1516738556.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:57.217Z,1516738557.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:57.629Z,1516738557.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:58.023Z,1516738558.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:58.425Z,1516738558.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:58.815Z,1516738558.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:59.221Z,1516738559.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:15:59.617Z,1516738559.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:00.015Z,1516738560.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:00.423Z,1516738560.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:00.822Z,1516738560.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:01.222Z,1516738561.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:01.629Z,1516738561.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:02.015Z,1516738562.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:02.419Z,1516738562.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:02.817Z,1516738562.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:03.215Z,1516738563.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:03.618Z,1516738563.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:04.023Z,1516738564.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:04.425Z,1516738564.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:04.815Z,1516738564.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:05.217Z,1516738565.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:05.619Z,1516738565.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:06.019Z,1516738566.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:06.421Z,1516738566.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:06.825Z,1516738566.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:07.222Z,1516738567.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:07.624Z,1516738567.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:08.019Z,1516738568.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:08.417Z,1516738568.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:08.821Z,1516738568.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:09.219Z,1516738569.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:09.626Z,1516738569.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:10.023Z,1516738570.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:10.427Z,1516738570.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:10.819Z,1516738570.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:11.221Z,1516738571.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:11.620Z,1516738571.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:12.012Z,1516738572.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:12.399Z,1516738572.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:12.824Z,1516738572.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:13.229Z,1516738573.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:13.629Z,1516738573.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:14.009Z,1516738574.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:14.413Z,1516738574.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:14.810Z,1516738574.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:15.208Z,1516738575.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:15.611Z,1516738575.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:16.014Z,1516738576.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:16.437Z,1516738576.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:16.813Z,1516738576.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:17.212Z,1516738577.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:17.608Z,1516738577.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:18.015Z,1516738578.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:18.408Z,1516738578.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:18.818Z,1516738578.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:19.222Z,1516738579.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:19.625Z,1516738579.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:20.006Z,1516738580.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:20.417Z,1516738580.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:20.809Z,1516738580.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:21.207Z,1516738581.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:21.618Z,1516738581.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:22.017Z,1516738582.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:22.417Z,1516738582.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:22.816Z,1516738582.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:23.209Z,1516738583.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:23.608Z,1516738583.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:24.025Z,1516738584.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:24.412Z,1516738584.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:24.818Z,1516738584.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:25.229Z,1516738585.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:25.628Z,1516738585.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:26.016Z,1516738586.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:26.417Z,1516738586.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:26.812Z,1516738586.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:27.207Z,1516738587.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:27.617Z,1516738587.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:28.028Z,1516738588.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:28.425Z,1516738588.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:28.817Z,1516738588.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:29.216Z,1516738589.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:29.613Z,1516738589.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:30.010Z,1516738590.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:30.409Z,1516738590.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:33.522Z,1516738593.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:33.681Z,1516738593.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:34.018Z,1516738594.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:34.411Z,1516738594.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:34.812Z,1516738594.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:35.215Z,1516738595.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:35.626Z,1516738595.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:36.025Z,1516738596.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:36.417Z,1516738596.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:36.825Z,1516738596.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:37.219Z,1516738597.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:37.617Z,1516738597.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:37.000Z,1516738598.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:38.421Z,1516738598.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:38.825Z,1516738598.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:39.227Z,1516738599.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:39.624Z,1516738599.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:40.027Z,1516738600.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:40.399Z,1516738600.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:40.801Z,1516738600.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:41.205Z,1516738601.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:41.627Z,1516738601.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:42.025Z,1516738602.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:42.427Z,1516738602.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:42.804Z,1516738602.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:43.203Z,1516738603.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:43.603Z,1516738603.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:44.021Z,1516738604.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:44.401Z,1516738604.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:44.810Z,1516738604.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:45.237Z,1516738605.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:45.633Z,1516738605.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:46.004Z,1516738606.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:46.403Z,1516738606.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:46.837Z,1516738606.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:47.217Z,1516738607.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:47.619Z,1516738607.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:48.036Z,1516738608.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:48.453Z,1516738608.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:48.846Z,1516738608.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:49.225Z,1516738609.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:49.618Z,1516738609.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:50.018Z,1516738610.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:50.425Z,1516738610.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:50.819Z,1516738610.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:51.247Z,1516738611.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:51.614Z,1516738611.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:52.017Z,1516738612.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:52.458Z,1516738612.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:52.821Z,1516738612.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:53.237Z,1516738613.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:53.666Z,1516738613.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:54.030Z,1516738614.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:54.429Z,1516738614.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:54.848Z,1516738614.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:55.240Z,1516738615.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:55.653Z,1516738615.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:56.033Z,1516738616.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:56.420Z,1516738616.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:56.828Z,1516738616.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:57.271Z,1516738617.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:57.640Z,1516738617.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:58.063Z,1516738618.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:58.409Z,1516738618.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:58.829Z,1516738618.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:59.259Z,1516738619.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:16:59.634Z,1516738619.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:00.034Z,1516738620.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:00.428Z,1516738620.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:00.821Z,1516738620.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:01.213Z,1516738621.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:01.626Z,1516738621.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:02.049Z,1516738622.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:02.414Z,1516738622.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:02.856Z,1516738622.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:03.232Z,1516738623.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:03.629Z,1516738623.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:04.025Z,1516738624.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:04.444Z,1516738624.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:04.806Z,1516738624.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:05.235Z,1516738625.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:05.666Z,1516738625.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:06.030Z,1516738626.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:06.442Z,1516738626.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:06.839Z,1516738626.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:07.209Z,1516738627.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:07.636Z,1516738627.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:08.025Z,1516738628.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:08.417Z,1516738628.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:08.829Z,1516738628.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:09.237Z,1516738629.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:09.621Z,1516738629.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:10.035Z,1516738630.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:10.444Z,1516738630.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:10.838Z,1516738630.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:11.237Z,1516738631.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:11.645Z,1516738631.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:12.010Z,1516738632.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:12.410Z,1516738632.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:12.802Z,1516738632.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:13.200Z,1516738633.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:13.608Z,1516738633.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:14.004Z,1516738634.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:14.404Z,1516738634.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:14.806Z,1516738634.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:15.209Z,1516738635.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:15.633Z,1516738635.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:16.013Z,1516738636.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:16.407Z,1516738636.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:16.805Z,1516738636.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:17.205Z,1516738637.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:17.615Z,1516738637.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:18.013Z,1516738638.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:18.421Z,1516738638.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:18.795Z,1516738638.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:19.201Z,1516738639.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:19.610Z,1516738639.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:20.064Z,1516738640.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:20.410Z,1516738640.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:20.797Z,1516738640.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:21.199Z,1516738641.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:21.610Z,1516738641.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:22.025Z,1516738642.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:22.428Z,1516738642.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:22.812Z,1516738642.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:23.219Z,1516738643.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:23.625Z,1516738643.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:24.027Z,1516738644.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:24.416Z,1516738644.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:24.819Z,1516738644.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:25.193Z,1516738645.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:25.622Z,1516738645.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:26.029Z,1516738646.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:26.423Z,1516738646.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:26.824Z,1516738646.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:27.200Z,1516738647.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:27.631Z,1516738647.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:27.633Z,1516738647.633 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:27.633Z,1516738647.633 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 339 2018-01-23T20:17:27.633Z,1516738647.633 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:17:27.646Z,1516738647.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:17:28.025Z,1516738648.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:28.038Z,1516738648.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:17:28.038Z,1516738648.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 339 2018-01-23T20:17:28.429Z,1516738648.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:28.430Z,1516738648.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:17:28.431Z,1516738648.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:17:28.431Z,1516738648.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:17:28.809Z,1516738648.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:29.200Z,1516738649.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:29.629Z,1516738649.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:30.010Z,1516738650.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:30.029Z,1516738650.029 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:17:30.029Z,1516738650.029 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:17:30.029Z,1516738650.029 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:17:30.029Z,1516738650.029 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:17:30.414Z,1516738650.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:30.433Z,1516738650.433 [Default:CheckIn:D] Stopped 2018-01-23T20:17:30.433Z,1516738650.433 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:17:30.806Z,1516738650.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1019.639583 min 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn:E] Stopped 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn] Stopped 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn](INFO): Running loop #100 2018-01-23T20:17:30.810Z,1516738650.810 [Default:CheckIn] Running Loop=100 2018-01-23T20:17:30.811Z,1516738650.811 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:17:30.811Z,1516738650.811 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:17:34.018Z,1516738654.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:34.188Z,1516738654.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:34.517Z,1516738654.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:34.913Z,1516738654.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:35.313Z,1516738655.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:35.713Z,1516738655.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:36.104Z,1516738656.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:36.503Z,1516738656.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:36.921Z,1516738656.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:37.324Z,1516738657.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:37.717Z,1516738657.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:38.105Z,1516738658.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:38.504Z,1516738658.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:38.906Z,1516738658.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:39.305Z,1516738659.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:39.718Z,1516738659.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:40.117Z,1516738660.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:40.514Z,1516738660.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:40.906Z,1516738660.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:41.313Z,1516738661.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:41.710Z,1516738661.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:42.110Z,1516738662.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:42.512Z,1516738662.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:42.512Z,1516738662.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 339 2018-01-23T20:17:42.512Z,1516738662.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:17:42.514Z,1516738662.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:42.514Z,1516738662.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 339 2018-01-23T20:17:42.514Z,1516738662.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:17:42.527Z,1516738662.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:17:42.527Z,1516738662.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:17:42.936Z,1516738662.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:17:42.936Z,1516738662.936 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 339 2018-01-23T20:17:42.937Z,1516738662.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:17:42.937Z,1516738662.937 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 339 2018-01-23T20:17:43.338Z,1516738663.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:17:43.339Z,1516738663.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:17:43.339Z,1516738663.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:17:43.339Z,1516738663.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:17:43.340Z,1516738663.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:17:43.340Z,1516738663.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:17:43.718Z,1516738663.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:17:43.719Z,1516738663.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:44.116Z,1516738664.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:17:44.117Z,1516738664.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:44.519Z,1516738664.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:17:44.520Z,1516738664.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:44.915Z,1516738664.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:17:44.916Z,1516738664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:45.315Z,1516738665.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:17:45.316Z,1516738665.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:45.726Z,1516738665.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:17:45.727Z,1516738665.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:46.125Z,1516738666.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:17:46.126Z,1516738666.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:46.523Z,1516738666.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:17:46.524Z,1516738666.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:46.917Z,1516738666.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:17:46.918Z,1516738666.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:47.293Z,1516738667.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:17:47.294Z,1516738667.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:47.717Z,1516738667.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:17:47.718Z,1516738667.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:48.101Z,1516738668.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:17:48.102Z,1516738668.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:48.492Z,1516738668.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:17:48.493Z,1516738668.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:48.925Z,1516738668.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:17:48.926Z,1516738668.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:49.329Z,1516738669.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:17:49.330Z,1516738669.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:49.725Z,1516738669.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:17:49.725Z,1516738669.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:50.128Z,1516738670.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:17:50.129Z,1516738670.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:50.530Z,1516738670.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:17:50.531Z,1516738670.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:50.903Z,1516738670.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:17:50.904Z,1516738670.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:51.308Z,1516738671.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:17:51.309Z,1516738671.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:51.737Z,1516738671.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:17:51.738Z,1516738671.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:52.105Z,1516738672.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:17:52.106Z,1516738672.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:52.509Z,1516738672.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:17:52.510Z,1516738672.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:52.903Z,1516738672.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:17:52.904Z,1516738672.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:53.302Z,1516738673.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:17:53.303Z,1516738673.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:53.698Z,1516738673.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:17:53.703Z,1516738673.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:54.112Z,1516738674.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:17:54.113Z,1516738674.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:54.512Z,1516738674.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:17:54.513Z,1516738674.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:54.912Z,1516738674.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:17:54.913Z,1516738674.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:55.308Z,1516738675.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:17:55.309Z,1516738675.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:55.710Z,1516738675.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:17:55.711Z,1516738675.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:56.103Z,1516738676.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:17:56.104Z,1516738676.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:56.504Z,1516738676.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:17:56.505Z,1516738676.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:56.904Z,1516738676.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:17:56.905Z,1516738676.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:57.303Z,1516738677.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:17:57.304Z,1516738677.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:57.716Z,1516738677.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:17:57.717Z,1516738677.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:58.108Z,1516738678.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:17:58.109Z,1516738678.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:58.510Z,1516738678.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:17:58.511Z,1516738678.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:58.904Z,1516738678.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:17:58.905Z,1516738678.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:59.305Z,1516738679.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:17:59.306Z,1516738679.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:17:59.702Z,1516738679.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:17:59.704Z,1516738679.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:00.104Z,1516738680.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:18:00.105Z,1516738680.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:00.502Z,1516738680.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:18:00.503Z,1516738680.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:00.921Z,1516738680.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:18:00.921Z,1516738680.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:01.316Z,1516738681.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:18:01.317Z,1516738681.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:01.713Z,1516738681.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:18:01.714Z,1516738681.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:02.104Z,1516738682.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:18:02.105Z,1516738682.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:02.508Z,1516738682.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:18:02.509Z,1516738682.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:02.904Z,1516738682.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:03.314Z,1516738683.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:03.714Z,1516738683.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:04.117Z,1516738684.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:04.521Z,1516738684.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:04.912Z,1516738684.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:05.305Z,1516738685.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:05.713Z,1516738685.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:06.107Z,1516738686.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:06.508Z,1516738686.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:06.914Z,1516738686.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:07.321Z,1516738687.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:07.714Z,1516738687.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:08.117Z,1516738688.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:08.508Z,1516738688.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:08.908Z,1516738688.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:09.311Z,1516738689.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:09.714Z,1516738689.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:10.115Z,1516738690.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:10.514Z,1516738690.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:10.915Z,1516738690.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:11.301Z,1516738691.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:11.711Z,1516738691.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:12.113Z,1516738692.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:12.511Z,1516738692.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:12.914Z,1516738692.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:13.318Z,1516738693.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:13.714Z,1516738693.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:14.111Z,1516738694.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:14.517Z,1516738694.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:14.909Z,1516738694.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:15.311Z,1516738695.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:15.715Z,1516738695.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:16.117Z,1516738696.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:16.514Z,1516738696.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:16.917Z,1516738696.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:17.301Z,1516738697.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:17.711Z,1516738697.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:18.125Z,1516738698.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:18.496Z,1516738698.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:18.922Z,1516738698.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:19.328Z,1516738699.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:19.725Z,1516738699.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:20.124Z,1516738700.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:20.503Z,1516738700.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:20.905Z,1516738700.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:21.304Z,1516738701.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:21.714Z,1516738701.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:22.107Z,1516738702.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:22.510Z,1516738702.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:22.910Z,1516738702.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:23.302Z,1516738703.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:23.712Z,1516738703.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:24.108Z,1516738704.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:24.505Z,1516738704.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:24.909Z,1516738704.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:25.309Z,1516738705.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:25.717Z,1516738705.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:26.113Z,1516738706.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:26.509Z,1516738706.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:26.909Z,1516738706.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:27.311Z,1516738707.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:27.720Z,1516738707.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:28.120Z,1516738708.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:28.514Z,1516738708.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:28.908Z,1516738708.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:29.303Z,1516738709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:29.713Z,1516738709.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:30.117Z,1516738710.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:30.513Z,1516738710.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:30.906Z,1516738710.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:34.030Z,1516738714.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:34.177Z,1516738714.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:34.550Z,1516738714.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:34.929Z,1516738714.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:35.318Z,1516738715.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:35.718Z,1516738715.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:36.120Z,1516738716.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:36.528Z,1516738716.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:36.926Z,1516738716.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:37.326Z,1516738717.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:37.725Z,1516738717.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:38.125Z,1516738718.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:38.523Z,1516738718.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:38.922Z,1516738718.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:39.321Z,1516738719.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:39.727Z,1516738719.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:40.129Z,1516738720.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:40.526Z,1516738720.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:40.928Z,1516738720.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:41.325Z,1516738721.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:41.734Z,1516738721.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:42.135Z,1516738722.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:42.530Z,1516738722.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:42.925Z,1516738722.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:43.323Z,1516738723.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:43.741Z,1516738723.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:44.133Z,1516738724.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:44.536Z,1516738724.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:44.925Z,1516738724.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:45.327Z,1516738725.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:45.734Z,1516738725.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:46.134Z,1516738726.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:46.530Z,1516738726.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:46.929Z,1516738726.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:47.361Z,1516738727.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:47.745Z,1516738727.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:48.138Z,1516738728.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:48.532Z,1516738728.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:48.928Z,1516738728.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:49.334Z,1516738729.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:49.737Z,1516738729.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:50.137Z,1516738730.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:50.545Z,1516738730.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:50.937Z,1516738730.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:51.341Z,1516738731.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:51.746Z,1516738731.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:52.122Z,1516738732.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:52.526Z,1516738732.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:52.929Z,1516738732.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:53.325Z,1516738733.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:53.722Z,1516738733.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:54.126Z,1516738734.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:54.534Z,1516738734.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:54.923Z,1516738734.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:55.320Z,1516738735.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:55.729Z,1516738735.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:56.126Z,1516738736.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:56.533Z,1516738736.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:56.929Z,1516738736.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:57.325Z,1516738737.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:57.731Z,1516738737.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:58.130Z,1516738738.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:58.530Z,1516738738.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:58.926Z,1516738738.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:59.321Z,1516738739.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:18:59.730Z,1516738739.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:00.130Z,1516738740.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:00.533Z,1516738740.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:00.926Z,1516738740.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:01.326Z,1516738741.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:01.737Z,1516738741.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:02.131Z,1516738742.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:02.537Z,1516738742.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:02.925Z,1516738742.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:03.322Z,1516738743.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:03.732Z,1516738743.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:04.133Z,1516738744.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:04.537Z,1516738744.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:04.926Z,1516738744.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:05.325Z,1516738745.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:05.680Z,1516738745.680 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T20:19:05.680Z,1516738745.680 [NAL9602] Data Fault, FailCount= 3 2018-01-23T20:19:05.680Z,1516738745.680 [NAL9602](ERROR): Data Fault 2018-01-23T20:19:05.741Z,1516738745.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:05.770Z,1516738745.770 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T20:19:06.080Z,1516738746.080 [NAL9602](INFO): Powering down 2018-01-23T20:19:06.127Z,1516738746.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:06.521Z,1516738746.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:06.929Z,1516738746.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:06.941Z,1516738746.941 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T20:19:06.941Z,1516738746.941 [NAL9602] No Fault, FailCount= 3 2018-01-23T20:19:07.319Z,1516738747.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:07.721Z,1516738747.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:08.121Z,1516738748.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:08.518Z,1516738748.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:08.919Z,1516738748.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:09.324Z,1516738749.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:09.728Z,1516738749.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:10.118Z,1516738750.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:10.524Z,1516738750.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:10.927Z,1516738750.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:11.319Z,1516738751.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:11.728Z,1516738751.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:12.140Z,1516738752.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:12.518Z,1516738752.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:12.928Z,1516738752.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:13.324Z,1516738753.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:13.720Z,1516738753.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:14.119Z,1516738754.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:14.519Z,1516738754.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:14.920Z,1516738754.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:15.329Z,1516738755.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:15.723Z,1516738755.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:16.123Z,1516738756.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:16.521Z,1516738756.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:16.920Z,1516738756.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:17.318Z,1516738757.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:17.726Z,1516738757.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:18.117Z,1516738758.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:18.527Z,1516738758.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:18.931Z,1516738758.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:19.308Z,1516738759.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:19.731Z,1516738759.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:20.110Z,1516738760.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:20.515Z,1516738760.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:20.915Z,1516738760.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:21.322Z,1516738761.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:21.711Z,1516738761.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:22.119Z,1516738762.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:22.523Z,1516738762.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:22.915Z,1516738762.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:23.318Z,1516738763.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:23.723Z,1516738763.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:24.115Z,1516738764.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:24.517Z,1516738764.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:24.925Z,1516738764.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:25.315Z,1516738765.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:25.718Z,1516738765.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:26.123Z,1516738766.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:26.517Z,1516738766.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:26.924Z,1516738766.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:27.320Z,1516738767.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:27.717Z,1516738767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:28.127Z,1516738768.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:28.525Z,1516738768.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:28.928Z,1516738768.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:29.329Z,1516738769.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:29.710Z,1516738769.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:30.108Z,1516738770.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:30.517Z,1516738770.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:30.920Z,1516738770.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:34.014Z,1516738774.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:34.121Z,1516738774.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:34.521Z,1516738774.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:34.918Z,1516738774.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:35.314Z,1516738775.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:35.725Z,1516738775.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:36.117Z,1516738776.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:36.480Z,1516738776.480 [NAL9602](INFO): Powering up NAL9602 2018-01-23T20:19:36.524Z,1516738776.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:36.921Z,1516738776.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:37.317Z,1516738777.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:37.721Z,1516738777.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:38.121Z,1516738778.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:38.516Z,1516738778.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:38.912Z,1516738778.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:39.324Z,1516738779.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:39.716Z,1516738779.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:40.112Z,1516738780.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:40.521Z,1516738780.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:40.914Z,1516738780.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:41.312Z,1516738781.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:41.718Z,1516738781.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:42.115Z,1516738782.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:42.515Z,1516738782.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:42.925Z,1516738782.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:43.315Z,1516738783.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:43.716Z,1516738783.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:44.126Z,1516738784.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:44.520Z,1516738784.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:44.924Z,1516738784.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:45.320Z,1516738785.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:45.716Z,1516738785.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:46.116Z,1516738786.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:46.535Z,1516738786.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:46.915Z,1516738786.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:47.326Z,1516738787.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:47.676Z,1516738787.676 [NAL9602](INFO): NAL9602 initialized 2018-01-23T20:19:47.721Z,1516738787.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:48.121Z,1516738788.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:48.528Z,1516738788.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:48.930Z,1516738788.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:49.333Z,1516738789.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:49.715Z,1516738789.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:50.126Z,1516738790.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:50.516Z,1516738790.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:50.924Z,1516738790.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:51.325Z,1516738791.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:51.728Z,1516738791.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:52.125Z,1516738792.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:52.529Z,1516738792.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:52.915Z,1516738792.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:53.317Z,1516738793.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:53.727Z,1516738793.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:54.116Z,1516738794.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:54.526Z,1516738794.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:54.933Z,1516738794.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:55.336Z,1516738795.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:55.721Z,1516738795.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:56.114Z,1516738796.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:56.521Z,1516738796.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:56.924Z,1516738796.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:57.325Z,1516738797.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:57.728Z,1516738797.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:58.125Z,1516738798.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:58.517Z,1516738798.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:58.914Z,1516738798.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:59.317Z,1516738799.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:19:59.717Z,1516738799.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:00.120Z,1516738800.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:00.527Z,1516738800.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:00.928Z,1516738800.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:01.332Z,1516738801.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:01.720Z,1516738801.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:02.114Z,1516738802.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:02.520Z,1516738802.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:02.920Z,1516738802.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:03.325Z,1516738803.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:03.732Z,1516738803.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:04.125Z,1516738804.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:04.517Z,1516738804.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:04.920Z,1516738804.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:05.316Z,1516738805.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:05.717Z,1516738805.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:06.117Z,1516738806.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:06.527Z,1516738806.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:06.933Z,1516738806.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:07.325Z,1516738807.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:07.720Z,1516738807.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:08.126Z,1516738808.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:08.515Z,1516738808.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:08.924Z,1516738808.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:09.325Z,1516738809.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:09.728Z,1516738809.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:10.126Z,1516738810.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:10.514Z,1516738810.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:10.920Z,1516738810.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:11.317Z,1516738811.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:11.724Z,1516738811.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:12.127Z,1516738812.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:12.541Z,1516738812.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:12.929Z,1516738812.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:13.334Z,1516738813.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:13.729Z,1516738813.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:14.124Z,1516738814.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:14.525Z,1516738814.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:14.927Z,1516738814.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:15.327Z,1516738815.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:15.734Z,1516738815.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:16.127Z,1516738816.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:16.525Z,1516738816.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:16.926Z,1516738816.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:17.321Z,1516738817.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:17.720Z,1516738817.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:18.131Z,1516738818.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:18.530Z,1516738818.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:18.941Z,1516738818.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:19.336Z,1516738819.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:19.708Z,1516738819.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:20.117Z,1516738820.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:20.519Z,1516738820.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:20.913Z,1516738820.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:21.339Z,1516738821.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:21.749Z,1516738821.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:22.142Z,1516738822.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:22.517Z,1516738822.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:22.924Z,1516738822.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:23.313Z,1516738823.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:23.721Z,1516738823.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:24.118Z,1516738824.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:24.519Z,1516738824.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:24.923Z,1516738824.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:25.353Z,1516738825.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:25.717Z,1516738825.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:26.117Z,1516738826.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:26.514Z,1516738826.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:26.920Z,1516738826.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:27.322Z,1516738827.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:27.751Z,1516738827.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:28.125Z,1516738828.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:28.521Z,1516738828.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:28.523Z,1516738828.523 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:28.523Z,1516738828.523 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 340 2018-01-23T20:20:28.523Z,1516738828.523 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:20:28.548Z,1516738828.548 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:20:28.917Z,1516738828.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:28.929Z,1516738828.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:20:28.929Z,1516738828.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 340 2018-01-23T20:20:29.318Z,1516738829.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:29.319Z,1516738829.319 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:20:29.320Z,1516738829.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:20:29.320Z,1516738829.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:20:29.724Z,1516738829.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:30.118Z,1516738830.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:30.530Z,1516738830.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:30.934Z,1516738830.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:31.336Z,1516738831.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:34.427Z,1516738834.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:34.563Z,1516738834.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:34.921Z,1516738834.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:35.320Z,1516738835.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:35.715Z,1516738835.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:36.115Z,1516738836.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:36.517Z,1516738836.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:36.885Z,1516738836.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:37.317Z,1516738837.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:37.720Z,1516738837.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:38.119Z,1516738838.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:38.518Z,1516738838.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:38.898Z,1516738838.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:39.313Z,1516738839.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:39.721Z,1516738839.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:40.098Z,1516738840.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:40.517Z,1516738840.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:40.921Z,1516738840.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:41.324Z,1516738841.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:41.715Z,1516738841.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:42.091Z,1516738842.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:42.494Z,1516738842.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:42.914Z,1516738842.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:43.300Z,1516738843.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:43.701Z,1516738843.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:43.701Z,1516738843.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 340 2018-01-23T20:20:43.702Z,1516738843.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:20:43.703Z,1516738843.703 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:43.703Z,1516738843.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 340 2018-01-23T20:20:43.704Z,1516738843.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:20:43.755Z,1516738843.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:20:43.755Z,1516738843.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:20:44.110Z,1516738844.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:20:44.110Z,1516738844.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 340 2018-01-23T20:20:44.119Z,1516738844.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:20:44.119Z,1516738844.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 340 2018-01-23T20:20:44.504Z,1516738844.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:20:44.504Z,1516738844.504 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:20:44.505Z,1516738844.505 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:20:44.505Z,1516738844.505 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:20:44.505Z,1516738844.505 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:20:44.506Z,1516738844.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:20:44.896Z,1516738844.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:20:44.897Z,1516738844.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:45.293Z,1516738845.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:20:45.295Z,1516738845.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:45.697Z,1516738845.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:20:45.698Z,1516738845.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:46.092Z,1516738846.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:20:46.093Z,1516738846.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:46.504Z,1516738846.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:20:46.505Z,1516738846.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:46.904Z,1516738846.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:20:46.905Z,1516738846.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:47.312Z,1516738847.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:20:47.313Z,1516738847.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:47.729Z,1516738847.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:20:47.730Z,1516738847.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:48.132Z,1516738848.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:20:48.132Z,1516738848.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:48.493Z,1516738848.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:20:48.494Z,1516738848.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:48.902Z,1516738848.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:20:48.907Z,1516738848.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:49.302Z,1516738849.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:20:49.304Z,1516738849.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:49.707Z,1516738849.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:20:49.709Z,1516738849.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:50.109Z,1516738850.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:20:50.110Z,1516738850.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:50.506Z,1516738850.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:20:50.508Z,1516738850.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:50.912Z,1516738850.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:20:50.913Z,1516738850.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:51.320Z,1516738851.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:20:51.321Z,1516738851.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:51.711Z,1516738851.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:20:51.712Z,1516738851.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:52.119Z,1516738852.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:20:52.120Z,1516738852.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:52.508Z,1516738852.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:20:52.509Z,1516738852.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:52.907Z,1516738852.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:20:52.908Z,1516738852.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:53.315Z,1516738853.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:20:53.316Z,1516738853.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:53.706Z,1516738853.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:20:53.711Z,1516738853.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:54.114Z,1516738854.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:20:54.115Z,1516738854.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:54.492Z,1516738854.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:20:54.493Z,1516738854.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:54.885Z,1516738854.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:20:54.886Z,1516738854.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:55.318Z,1516738855.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:20:55.324Z,1516738855.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:55.742Z,1516738855.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:20:55.743Z,1516738855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:56.090Z,1516738856.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:20:56.091Z,1516738856.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:56.494Z,1516738856.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:20:56.495Z,1516738856.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:56.926Z,1516738856.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:20:56.927Z,1516738856.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:57.300Z,1516738857.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:20:57.301Z,1516738857.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:57.691Z,1516738857.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:20:57.692Z,1516738857.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:58.092Z,1516738858.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:20:58.093Z,1516738858.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:58.494Z,1516738858.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:20:58.495Z,1516738858.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:58.896Z,1516738858.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:20:58.897Z,1516738858.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:59.297Z,1516738859.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:20:59.298Z,1516738859.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:20:59.698Z,1516738859.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:20:59.699Z,1516738859.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:00.097Z,1516738860.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:21:00.098Z,1516738860.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:00.493Z,1516738860.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:21:00.494Z,1516738860.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:00.891Z,1516738860.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:21:00.892Z,1516738860.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:01.331Z,1516738861.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:21:01.332Z,1516738861.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:01.704Z,1516738861.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:21:01.706Z,1516738861.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:02.097Z,1516738862.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:21:02.098Z,1516738862.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:02.493Z,1516738862.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:21:02.494Z,1516738862.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:02.891Z,1516738862.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:21:02.892Z,1516738862.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:03.301Z,1516738863.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:21:03.302Z,1516738863.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:03.706Z,1516738863.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:04.109Z,1516738864.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:04.496Z,1516738864.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:04.905Z,1516738864.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:05.309Z,1516738865.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:05.705Z,1516738865.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:06.105Z,1516738866.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:06.493Z,1516738866.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:06.894Z,1516738866.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:07.302Z,1516738867.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:07.718Z,1516738867.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:08.110Z,1516738868.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:08.489Z,1516738868.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:08.888Z,1516738868.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:09.295Z,1516738869.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:09.698Z,1516738869.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:10.104Z,1516738870.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:10.495Z,1516738870.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:10.901Z,1516738870.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:11.304Z,1516738871.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:11.709Z,1516738871.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:12.102Z,1516738872.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:12.505Z,1516738872.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:12.893Z,1516738872.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:13.301Z,1516738873.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:13.709Z,1516738873.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:14.101Z,1516738874.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:14.506Z,1516738874.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:14.903Z,1516738874.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:15.301Z,1516738875.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:15.705Z,1516738875.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:16.102Z,1516738876.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:16.494Z,1516738876.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:16.902Z,1516738876.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:17.302Z,1516738877.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:17.712Z,1516738877.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:18.102Z,1516738878.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:18.504Z,1516738878.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:18.899Z,1516738878.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:19.302Z,1516738879.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:19.713Z,1516738879.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:20.102Z,1516738880.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:20.505Z,1516738880.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:20.909Z,1516738880.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:21.305Z,1516738881.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:21.705Z,1516738881.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:22.109Z,1516738882.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:22.494Z,1516738882.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:22.901Z,1516738882.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:23.306Z,1516738883.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:23.705Z,1516738883.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:24.102Z,1516738884.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:24.497Z,1516738884.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:24.902Z,1516738884.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:25.306Z,1516738885.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:25.718Z,1516738885.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:26.106Z,1516738886.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:26.501Z,1516738886.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:26.905Z,1516738886.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:27.301Z,1516738887.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:27.711Z,1516738887.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:28.113Z,1516738888.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:28.506Z,1516738888.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:28.895Z,1516738888.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:29.303Z,1516738889.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:29.708Z,1516738889.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:30.105Z,1516738890.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:30.508Z,1516738890.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:30.908Z,1516738890.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:31.306Z,1516738891.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:31.698Z,1516738891.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:34.792Z,1516738894.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:34.933Z,1516738894.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:35.262Z,1516738895.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:35.691Z,1516738895.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:36.063Z,1516738896.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:36.459Z,1516738896.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:36.860Z,1516738896.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:37.260Z,1516738897.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:37.663Z,1516738897.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:38.066Z,1516738898.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:38.495Z,1516738898.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:38.865Z,1516738898.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:39.263Z,1516738899.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:39.663Z,1516738899.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:40.064Z,1516738900.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:40.466Z,1516738900.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:40.866Z,1516738900.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:41.269Z,1516738901.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:41.664Z,1516738901.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:42.058Z,1516738902.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:42.468Z,1516738902.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:42.861Z,1516738902.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:43.262Z,1516738903.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:43.699Z,1516738903.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:44.065Z,1516738904.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:44.473Z,1516738904.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:44.862Z,1516738904.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:45.264Z,1516738905.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:45.669Z,1516738905.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:46.063Z,1516738906.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:46.466Z,1516738906.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:46.873Z,1516738906.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:47.267Z,1516738907.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:47.665Z,1516738907.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:48.058Z,1516738908.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:48.464Z,1516738908.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:48.870Z,1516738908.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:49.258Z,1516738909.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:49.670Z,1516738909.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:50.069Z,1516738910.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:50.469Z,1516738910.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:50.859Z,1516738910.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:51.263Z,1516738911.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:51.662Z,1516738911.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:52.061Z,1516738912.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:52.478Z,1516738912.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:52.871Z,1516738912.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:53.271Z,1516738913.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:53.673Z,1516738913.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:54.067Z,1516738914.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:54.460Z,1516738914.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:54.874Z,1516738914.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:55.269Z,1516738915.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:55.671Z,1516738915.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:56.077Z,1516738916.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:56.477Z,1516738916.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:56.871Z,1516738916.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:57.268Z,1516738917.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:57.652Z,1516738917.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:58.079Z,1516738918.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:58.478Z,1516738918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:58.881Z,1516738918.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:59.289Z,1516738919.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:21:59.685Z,1516738919.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:00.061Z,1516738920.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:00.465Z,1516738920.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:00.862Z,1516738920.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:01.258Z,1516738921.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:01.666Z,1516738921.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:02.090Z,1516738922.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:02.474Z,1516738922.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:02.864Z,1516738922.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:03.261Z,1516738923.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:03.673Z,1516738923.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:04.069Z,1516738924.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:04.477Z,1516738924.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:04.870Z,1516738924.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:05.270Z,1516738925.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:05.672Z,1516738925.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:06.066Z,1516738926.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:06.469Z,1516738926.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:06.869Z,1516738926.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:07.272Z,1516738927.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:07.685Z,1516738927.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:08.076Z,1516738928.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:08.473Z,1516738928.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:08.868Z,1516738928.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:09.274Z,1516738929.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:09.668Z,1516738929.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:10.071Z,1516738930.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:10.478Z,1516738930.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:10.881Z,1516738930.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:11.273Z,1516738931.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:11.680Z,1516738931.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:12.075Z,1516738932.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:12.473Z,1516738932.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:12.856Z,1516738932.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:13.257Z,1516738933.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:13.685Z,1516738933.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:14.088Z,1516738934.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:14.480Z,1516738934.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:14.860Z,1516738934.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:15.256Z,1516738935.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:15.661Z,1516738935.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:16.076Z,1516738936.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:16.484Z,1516738936.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:16.881Z,1516738936.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:17.279Z,1516738937.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:17.661Z,1516738937.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:18.056Z,1516738938.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:18.460Z,1516738938.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:18.873Z,1516738938.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:19.265Z,1516738939.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:19.677Z,1516738939.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:20.083Z,1516738940.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:20.470Z,1516738940.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:20.865Z,1516738940.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:21.265Z,1516738941.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:21.668Z,1516738941.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:22.073Z,1516738942.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:22.471Z,1516738942.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:22.875Z,1516738942.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:23.273Z,1516738943.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:23.677Z,1516738943.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:24.069Z,1516738944.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:24.461Z,1516738944.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:24.876Z,1516738944.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:25.265Z,1516738945.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:25.670Z,1516738945.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:26.080Z,1516738946.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:26.470Z,1516738946.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:26.865Z,1516738946.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:27.263Z,1516738947.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:27.669Z,1516738947.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:28.065Z,1516738948.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:28.478Z,1516738948.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:28.877Z,1516738948.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:29.271Z,1516738949.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:29.674Z,1516738949.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:30.071Z,1516738950.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:30.471Z,1516738950.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:30.873Z,1516738950.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:30.876Z,1516738950.876 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:17:30.8Z 2018-01-23T20:22:30.876Z,1516738950.876 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:22:30.876Z,1516738950.876 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:22:31.271Z,1516738951.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:31.822Z,1516738951.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:32.074Z,1516738952.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:35.177Z,1516738955.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:35.296Z,1516738955.296 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0400.lzma 2018-01-23T20:22:35.373Z,1516738955.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:35.644Z,1516738955.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:36.002Z,1516738956.002 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0400.lzma.bak 2018-01-23T20:22:36.002Z,1516738956.002 [DataOverHttps](INFO): SBD MOMSN=7756583 2018-01-23T20:22:36.057Z,1516738956.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:36.702Z,1516738956.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:36.881Z,1516738956.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:39.956Z,1516738959.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:40.081Z,1516738960.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:40.456Z,1516738960.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:40.881Z,1516738960.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:41.261Z,1516738961.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:41.666Z,1516738961.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:44.758Z,1516738964.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:44.840Z,1516738964.840 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0401.lzma 2018-01-23T20:22:44.913Z,1516738964.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:45.221Z,1516738965.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:45.585Z,1516738965.585 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0401.lzma.bak 2018-01-23T20:22:45.586Z,1516738965.586 [DataOverHttps](INFO): SBD MOMSN=7756585 2018-01-23T20:22:45.624Z,1516738965.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:46.297Z,1516738966.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:46.303Z,1516738966.303 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:22:46.303Z,1516738966.303 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:22:46.303Z,1516738966.303 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:22:46.439Z,1516738966.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:49.532Z,1516738969.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:49.681Z,1516738969.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:50.021Z,1516738970.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:50.425Z,1516738970.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:50.826Z,1516738970.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:51.229Z,1516738971.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:51.630Z,1516738971.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:52.037Z,1516738972.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:52.442Z,1516738972.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:52.825Z,1516738972.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:53.228Z,1516738973.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:53.629Z,1516738973.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:54.026Z,1516738974.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:54.424Z,1516738974.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:54.835Z,1516738974.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:55.237Z,1516738975.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:55.633Z,1516738975.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:56.025Z,1516738976.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:56.428Z,1516738976.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:56.831Z,1516738976.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:57.229Z,1516738977.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:57.655Z,1516738977.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:58.045Z,1516738978.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:58.434Z,1516738978.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:58.825Z,1516738978.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:59.224Z,1516738979.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:22:59.637Z,1516738979.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:00.025Z,1516738980.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:00.429Z,1516738980.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:00.834Z,1516738980.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:01.244Z,1516738981.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:01.677Z,1516738981.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:02.026Z,1516738982.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:02.432Z,1516738982.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:02.828Z,1516738982.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:03.229Z,1516738983.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:03.634Z,1516738983.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:04.116Z,1516738984.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:04.441Z,1516738984.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:04.827Z,1516738984.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:05.237Z,1516738985.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:05.617Z,1516738985.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:06.060Z,1516738986.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:06.425Z,1516738986.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:06.833Z,1516738986.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:07.237Z,1516738987.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:07.637Z,1516738987.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:08.029Z,1516738988.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:08.428Z,1516738988.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:08.828Z,1516738988.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:09.225Z,1516738989.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:09.634Z,1516738989.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:10.041Z,1516738990.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:10.441Z,1516738990.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:10.824Z,1516738990.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:11.229Z,1516738991.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:11.625Z,1516738991.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:12.028Z,1516738992.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:12.427Z,1516738992.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:12.833Z,1516738992.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:13.244Z,1516738993.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:13.637Z,1516738993.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:14.025Z,1516738994.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:14.428Z,1516738994.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:14.828Z,1516738994.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:15.225Z,1516738995.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:15.634Z,1516738995.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:16.041Z,1516738996.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:16.433Z,1516738996.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:16.826Z,1516738996.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:17.225Z,1516738997.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:17.630Z,1516738997.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:18.026Z,1516738998.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:18.429Z,1516738998.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:18.841Z,1516738998.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:19.238Z,1516738999.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:19.637Z,1516738999.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:20.027Z,1516739000.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:20.426Z,1516739000.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:20.827Z,1516739000.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:21.225Z,1516739001.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:21.636Z,1516739001.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:22.043Z,1516739002.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:22.445Z,1516739002.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:22.832Z,1516739002.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:23.225Z,1516739003.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:23.637Z,1516739003.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:24.033Z,1516739004.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:24.435Z,1516739004.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:24.834Z,1516739004.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:25.244Z,1516739005.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:25.645Z,1516739005.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:26.031Z,1516739006.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:26.433Z,1516739006.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:26.828Z,1516739006.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:27.235Z,1516739007.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:27.645Z,1516739007.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:28.044Z,1516739008.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:28.438Z,1516739008.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:28.836Z,1516739008.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:29.214Z,1516739009.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:29.636Z,1516739009.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:29.638Z,1516739009.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:29.638Z,1516739009.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 341 2018-01-23T20:23:29.638Z,1516739009.638 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:23:29.675Z,1516739009.675 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:23:30.024Z,1516739010.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:30.067Z,1516739010.067 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:23:30.067Z,1516739010.067 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 341 2018-01-23T20:23:30.424Z,1516739010.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:30.425Z,1516739010.425 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:23:30.426Z,1516739010.426 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:23:30.426Z,1516739010.426 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:23:30.847Z,1516739010.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:31.248Z,1516739011.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:31.650Z,1516739011.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:32.028Z,1516739012.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:32.425Z,1516739012.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:32.829Z,1516739012.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:33.226Z,1516739013.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:33.626Z,1516739013.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:34.026Z,1516739014.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:34.451Z,1516739014.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:34.834Z,1516739014.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:35.225Z,1516739015.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:35.629Z,1516739015.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:36.029Z,1516739016.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:36.439Z,1516739016.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:36.843Z,1516739016.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:37.245Z,1516739017.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:37.649Z,1516739017.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:38.039Z,1516739018.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:38.415Z,1516739018.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:38.817Z,1516739018.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:39.245Z,1516739019.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:39.649Z,1516739019.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:40.047Z,1516739020.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:40.452Z,1516739020.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:40.833Z,1516739020.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:41.227Z,1516739021.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:41.625Z,1516739021.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:42.024Z,1516739022.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:42.425Z,1516739022.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:42.846Z,1516739022.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:43.238Z,1516739023.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:43.645Z,1516739023.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:44.030Z,1516739024.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:44.428Z,1516739024.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:44.832Z,1516739024.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:44.833Z,1516739024.833 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 341 2018-01-23T20:23:44.833Z,1516739024.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:23:44.834Z,1516739024.834 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:44.835Z,1516739024.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 341 2018-01-23T20:23:44.835Z,1516739024.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:23:44.847Z,1516739024.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:23:44.848Z,1516739024.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:23:45.242Z,1516739025.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:23:45.242Z,1516739025.242 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 341 2018-01-23T20:23:45.243Z,1516739025.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:23:45.243Z,1516739025.243 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 341 2018-01-23T20:23:45.640Z,1516739025.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:23:45.640Z,1516739025.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:23:45.640Z,1516739025.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:23:45.641Z,1516739025.641 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:23:45.641Z,1516739025.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:23:45.642Z,1516739025.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:23:46.035Z,1516739026.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:23:46.036Z,1516739026.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:46.444Z,1516739026.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:23:46.445Z,1516739026.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:46.828Z,1516739026.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:23:46.829Z,1516739026.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:50.077Z,1516739030.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:23:50.078Z,1516739030.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:50.216Z,1516739030.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s. 2018-01-23T20:23:50.217Z,1516739030.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:50.546Z,1516739030.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T20:23:50.548Z,1516739030.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:50.979Z,1516739030.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T20:23:50.980Z,1516739030.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:51.376Z,1516739031.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T20:23:51.377Z,1516739031.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:51.752Z,1516739031.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T20:23:51.753Z,1516739031.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:52.148Z,1516739032.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T20:23:52.149Z,1516739032.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:52.551Z,1516739032.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T20:23:52.552Z,1516739032.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:52.950Z,1516739032.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T20:23:52.951Z,1516739032.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:53.349Z,1516739033.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T20:23:53.350Z,1516739033.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:53.744Z,1516739033.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T20:23:53.745Z,1516739033.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:54.142Z,1516739034.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T20:23:54.143Z,1516739034.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:54.549Z,1516739034.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T20:23:54.550Z,1516739034.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:54.950Z,1516739034.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T20:23:54.951Z,1516739034.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:55.353Z,1516739035.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T20:23:55.354Z,1516739035.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:55.754Z,1516739035.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T20:23:55.755Z,1516739035.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:56.149Z,1516739036.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T20:23:56.150Z,1516739036.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:56.554Z,1516739036.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T20:23:56.555Z,1516739036.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:56.960Z,1516739036.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T20:23:56.961Z,1516739036.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:57.353Z,1516739037.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T20:23:57.354Z,1516739037.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:57.745Z,1516739037.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T20:23:57.746Z,1516739037.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:58.154Z,1516739038.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T20:23:58.155Z,1516739038.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:58.554Z,1516739038.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T20:23:58.555Z,1516739038.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:58.953Z,1516739038.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T20:23:58.954Z,1516739038.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:59.353Z,1516739039.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T20:23:59.354Z,1516739039.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:23:59.745Z,1516739039.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T20:23:59.746Z,1516739039.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:00.146Z,1516739040.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T20:24:00.151Z,1516739040.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:00.555Z,1516739040.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T20:24:00.556Z,1516739040.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:00.957Z,1516739040.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T20:24:00.958Z,1516739040.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:01.353Z,1516739041.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T20:24:01.354Z,1516739041.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:01.753Z,1516739041.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T20:24:01.754Z,1516739041.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:02.153Z,1516739042.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T20:24:02.154Z,1516739042.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:02.553Z,1516739042.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T20:24:02.554Z,1516739042.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:02.957Z,1516739042.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T20:24:02.958Z,1516739042.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:03.357Z,1516739043.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T20:24:03.358Z,1516739043.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:03.745Z,1516739043.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T20:24:03.746Z,1516739043.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:04.153Z,1516739044.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T20:24:04.154Z,1516739044.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:04.564Z,1516739044.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T20:24:04.565Z,1516739044.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:04.957Z,1516739044.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:05.355Z,1516739045.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:05.746Z,1516739045.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:06.153Z,1516739046.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:06.556Z,1516739046.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:06.962Z,1516739046.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:07.365Z,1516739047.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:07.754Z,1516739047.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:08.150Z,1516739048.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:08.569Z,1516739048.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:08.960Z,1516739048.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:09.368Z,1516739049.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:09.747Z,1516739049.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:10.161Z,1516739050.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:10.564Z,1516739050.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:10.961Z,1516739050.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:11.365Z,1516739051.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:11.757Z,1516739051.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:12.136Z,1516739052.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:12.544Z,1516739052.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:12.963Z,1516739052.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:13.370Z,1516739053.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:13.771Z,1516739053.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:14.141Z,1516739054.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:14.540Z,1516739054.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:14.940Z,1516739054.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:15.353Z,1516739055.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:15.776Z,1516739055.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:16.150Z,1516739056.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:16.549Z,1516739056.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:16.944Z,1516739056.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:17.348Z,1516739057.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:17.745Z,1516739057.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:18.143Z,1516739058.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:18.542Z,1516739058.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:18.953Z,1516739058.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:19.376Z,1516739059.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:19.753Z,1516739059.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:20.144Z,1516739060.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:20.544Z,1516739060.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:20.946Z,1516739060.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:21.344Z,1516739061.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:21.751Z,1516739061.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:22.153Z,1516739062.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:22.551Z,1516739062.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:22.944Z,1516739062.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:23.345Z,1516739063.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:23.745Z,1516739063.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:24.152Z,1516739064.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:24.550Z,1516739064.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:24.965Z,1516739064.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:25.358Z,1516739065.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:25.756Z,1516739065.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:26.145Z,1516739066.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:26.555Z,1516739066.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:26.949Z,1516739066.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:27.385Z,1516739067.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:27.755Z,1516739067.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:28.164Z,1516739068.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:28.557Z,1516739068.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:28.960Z,1516739068.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:29.347Z,1516739069.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:29.745Z,1516739069.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:30.152Z,1516739070.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:30.563Z,1516739070.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:30.958Z,1516739070.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:31.362Z,1516739071.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:31.760Z,1516739071.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:32.141Z,1516739072.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:32.556Z,1516739072.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:32.958Z,1516739072.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:33.333Z,1516739073.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:33.758Z,1516739073.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:34.165Z,1516739074.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:34.557Z,1516739074.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:34.961Z,1516739074.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:35.339Z,1516739075.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:35.769Z,1516739075.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:36.144Z,1516739076.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:36.543Z,1516739076.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:36.967Z,1516739076.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:37.376Z,1516739077.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:37.753Z,1516739077.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:38.145Z,1516739078.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:38.175Z,1516739078.175 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:24:38.553Z,1516739078.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:38.949Z,1516739078.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:39.342Z,1516739079.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:39.761Z,1516739079.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:40.158Z,1516739080.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:40.557Z,1516739080.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:40.945Z,1516739080.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:41.353Z,1516739081.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:41.747Z,1516739081.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:42.145Z,1516739082.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:42.549Z,1516739082.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:42.954Z,1516739082.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:43.357Z,1516739083.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:43.764Z,1516739083.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:44.143Z,1516739084.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:44.545Z,1516739084.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:44.949Z,1516739084.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:45.345Z,1516739085.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:45.765Z,1516739085.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:46.159Z,1516739086.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:46.557Z,1516739086.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:46.952Z,1516739086.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:50.055Z,1516739090.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:50.173Z,1516739090.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:50.554Z,1516739090.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:50.955Z,1516739090.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:51.328Z,1516739091.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:51.722Z,1516739091.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:52.123Z,1516739092.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:52.532Z,1516739092.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:52.928Z,1516739092.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:53.328Z,1516739093.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:53.730Z,1516739093.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:54.124Z,1516739094.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:54.522Z,1516739094.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:54.924Z,1516739094.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:55.322Z,1516739095.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:55.726Z,1516739095.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:56.128Z,1516739096.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:56.537Z,1516739096.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:56.928Z,1516739096.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:57.322Z,1516739097.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:57.729Z,1516739097.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:58.125Z,1516739098.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:58.522Z,1516739098.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:58.961Z,1516739098.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:59.332Z,1516739099.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:24:59.734Z,1516739099.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:00.124Z,1516739100.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:00.522Z,1516739100.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:00.927Z,1516739100.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:01.325Z,1516739101.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:01.732Z,1516739101.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:02.130Z,1516739102.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:02.533Z,1516739102.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:02.924Z,1516739102.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:03.331Z,1516739103.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:03.724Z,1516739103.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:04.133Z,1516739104.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:04.517Z,1516739104.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x47686 got:0x49815 2018-01-23T20:25:04.545Z,1516739104.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:04.941Z,1516739104.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:05.338Z,1516739105.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:05.733Z,1516739105.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:06.131Z,1516739106.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:06.528Z,1516739106.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:06.927Z,1516739106.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:07.336Z,1516739107.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:07.733Z,1516739107.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:08.135Z,1516739108.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:08.530Z,1516739108.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:08.933Z,1516739108.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:09.334Z,1516739109.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:09.724Z,1516739109.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:10.135Z,1516739110.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:10.545Z,1516739110.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:10.935Z,1516739110.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:11.337Z,1516739111.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:11.733Z,1516739111.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:12.141Z,1516739112.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:12.531Z,1516739112.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:12.929Z,1516739112.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:13.324Z,1516739113.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:13.749Z,1516739113.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:14.137Z,1516739114.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:14.533Z,1516739114.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:14.930Z,1516739114.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:15.321Z,1516739115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:15.731Z,1516739115.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:16.130Z,1516739116.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:16.531Z,1516739116.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:16.949Z,1516739116.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:17.342Z,1516739117.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:17.736Z,1516739117.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:18.128Z,1516739118.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:18.530Z,1516739118.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:18.930Z,1516739118.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:19.333Z,1516739119.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:19.738Z,1516739119.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:20.153Z,1516739120.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:20.541Z,1516739120.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:20.933Z,1516739120.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:21.335Z,1516739121.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:21.742Z,1516739121.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:22.117Z,1516739122.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:22.520Z,1516739122.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:22.948Z,1516739122.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:23.353Z,1516739123.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:23.726Z,1516739123.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:24.121Z,1516739124.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:24.528Z,1516739124.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:24.929Z,1516739124.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:25.325Z,1516739125.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:25.736Z,1516739125.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:26.137Z,1516739126.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:26.530Z,1516739126.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:26.922Z,1516739126.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:27.331Z,1516739127.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:27.731Z,1516739127.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:28.121Z,1516739128.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:28.522Z,1516739128.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:28.933Z,1516739128.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:29.339Z,1516739129.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:29.749Z,1516739129.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:30.129Z,1516739130.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:30.529Z,1516739130.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:30.932Z,1516739130.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:31.325Z,1516739131.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:31.741Z,1516739131.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:32.140Z,1516739132.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:32.535Z,1516739132.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:32.924Z,1516739132.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:33.325Z,1516739133.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:33.730Z,1516739133.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:34.138Z,1516739134.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:34.537Z,1516739134.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:34.921Z,1516739134.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:35.332Z,1516739135.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:35.732Z,1516739135.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:36.134Z,1516739136.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:36.530Z,1516739136.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:36.922Z,1516739136.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:37.330Z,1516739137.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:37.730Z,1516739137.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:38.138Z,1516739138.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:38.533Z,1516739138.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:38.934Z,1516739138.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:39.326Z,1516739139.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:39.733Z,1516739139.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:40.135Z,1516739140.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:40.531Z,1516739140.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:40.925Z,1516739140.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:41.331Z,1516739141.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:41.737Z,1516739141.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:42.149Z,1516739142.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:42.539Z,1516739142.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:42.933Z,1516739142.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:43.317Z,1516739143.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:43.745Z,1516739143.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:44.150Z,1516739144.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:44.540Z,1516739144.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:44.917Z,1516739144.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:45.317Z,1516739145.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:45.727Z,1516739145.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:46.129Z,1516739146.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:46.533Z,1516739146.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:46.924Z,1516739146.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:47.320Z,1516739147.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:50.427Z,1516739150.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:50.593Z,1516739150.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:50.911Z,1516739150.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:51.316Z,1516739151.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:51.688Z,1516739151.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:52.092Z,1516739152.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:52.492Z,1516739152.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:52.902Z,1516739152.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:53.306Z,1516739153.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:53.705Z,1516739153.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:54.097Z,1516739154.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:54.491Z,1516739154.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:54.900Z,1516739154.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:55.293Z,1516739155.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:55.697Z,1516739155.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:56.102Z,1516739156.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:56.505Z,1516739156.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:56.909Z,1516739156.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:57.297Z,1516739157.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:57.692Z,1516739157.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:58.094Z,1516739158.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:58.495Z,1516739158.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:58.902Z,1516739158.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:59.306Z,1516739159.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:25:59.706Z,1516739159.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:00.094Z,1516739160.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:00.495Z,1516739160.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:00.904Z,1516739160.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:01.295Z,1516739161.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:01.703Z,1516739161.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:02.104Z,1516739162.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:02.509Z,1516739162.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:02.903Z,1516739162.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:03.309Z,1516739163.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:03.703Z,1516739163.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:04.084Z,1516739164.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:04.483Z,1516739164.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:04.909Z,1516739164.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:05.314Z,1516739165.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:05.718Z,1516739165.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:06.088Z,1516739166.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:06.513Z,1516739166.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:06.891Z,1516739166.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:07.293Z,1516739167.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:07.688Z,1516739167.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:08.124Z,1516739168.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:08.498Z,1516739168.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:08.922Z,1516739168.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:09.293Z,1516739169.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:09.690Z,1516739169.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:10.090Z,1516739170.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:10.495Z,1516739170.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:10.905Z,1516739170.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:11.298Z,1516739171.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:11.698Z,1516739171.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:12.096Z,1516739172.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:12.493Z,1516739172.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:12.893Z,1516739172.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:13.299Z,1516739173.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:13.696Z,1516739173.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:14.098Z,1516739174.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:14.502Z,1516739174.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:14.899Z,1516739174.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:15.292Z,1516739175.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:15.698Z,1516739175.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:16.104Z,1516739176.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:16.493Z,1516739176.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:16.898Z,1516739176.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:17.305Z,1516739177.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:17.698Z,1516739177.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:18.098Z,1516739178.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:18.497Z,1516739178.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:18.892Z,1516739178.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:19.294Z,1516739179.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:19.697Z,1516739179.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:20.104Z,1516739180.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:20.509Z,1516739180.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:20.901Z,1516739180.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:21.293Z,1516739181.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:21.691Z,1516739181.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:22.100Z,1516739182.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:22.496Z,1516739182.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:22.909Z,1516739182.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:23.305Z,1516739183.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:23.702Z,1516739183.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:24.094Z,1516739184.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:24.494Z,1516739184.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:24.896Z,1516739184.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:25.296Z,1516739185.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:25.699Z,1516739185.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:26.103Z,1516739186.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:26.505Z,1516739186.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:26.903Z,1516739186.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:27.303Z,1516739187.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:27.705Z,1516739187.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:28.100Z,1516739188.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:28.499Z,1516739188.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:28.906Z,1516739188.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:29.313Z,1516739189.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:29.703Z,1516739189.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:30.101Z,1516739190.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:30.499Z,1516739190.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:30.501Z,1516739190.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:30.501Z,1516739190.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 342 2018-01-23T20:26:30.501Z,1516739190.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:26:30.514Z,1516739190.514 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:26:30.905Z,1516739190.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:30.918Z,1516739190.918 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:26:30.918Z,1516739190.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 342 2018-01-23T20:26:31.298Z,1516739191.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:31.299Z,1516739191.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:26:31.300Z,1516739191.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:26:31.300Z,1516739191.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:26:31.699Z,1516739191.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:32.103Z,1516739192.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:32.508Z,1516739192.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:32.906Z,1516739192.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:33.299Z,1516739193.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:33.709Z,1516739193.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:34.103Z,1516739194.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:34.505Z,1516739194.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:34.913Z,1516739194.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:35.313Z,1516739195.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:35.707Z,1516739195.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:36.103Z,1516739196.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:36.503Z,1516739196.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:36.905Z,1516739196.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:37.296Z,1516739197.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:37.707Z,1516739197.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:38.114Z,1516739198.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:38.506Z,1516739198.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:38.914Z,1516739198.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:39.314Z,1516739199.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:39.682Z,1516739199.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:40.108Z,1516739200.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:40.492Z,1516739200.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:40.911Z,1516739200.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:41.319Z,1516739201.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:41.724Z,1516739201.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:42.089Z,1516739202.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:42.489Z,1516739202.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:42.890Z,1516739202.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:43.289Z,1516739203.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:43.696Z,1516739203.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:44.126Z,1516739204.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:44.522Z,1516739204.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:44.894Z,1516739204.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:45.291Z,1516739205.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:45.690Z,1516739205.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:45.690Z,1516739205.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 342 2018-01-23T20:26:45.690Z,1516739205.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:26:45.692Z,1516739205.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:45.692Z,1516739205.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 342 2018-01-23T20:26:45.693Z,1516739205.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:26:45.705Z,1516739205.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:26:45.706Z,1516739205.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:26:46.119Z,1516739206.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:26:46.119Z,1516739206.119 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 342 2018-01-23T20:26:46.120Z,1516739206.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:26:46.120Z,1516739206.120 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 342 2018-01-23T20:26:46.490Z,1516739206.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:26:46.491Z,1516739206.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:26:46.491Z,1516739206.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:26:46.492Z,1516739206.492 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:26:46.492Z,1516739206.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:26:46.492Z,1516739206.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:26:46.908Z,1516739206.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:26:46.909Z,1516739206.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:47.304Z,1516739207.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:26:47.305Z,1516739207.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:47.701Z,1516739207.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:26:47.702Z,1516739207.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:53.142Z,1516739213.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s. 2018-01-23T20:26:53.143Z,1516739213.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:53.297Z,1516739213.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:26:53.298Z,1516739213.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:53.641Z,1516739213.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:26:53.642Z,1516739213.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:54.036Z,1516739214.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s. 2018-01-23T20:26:54.037Z,1516739214.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:54.422Z,1516739214.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s. 2018-01-23T20:26:54.423Z,1516739214.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:54.845Z,1516739214.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:26:54.846Z,1516739214.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:55.252Z,1516739215.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:26:55.253Z,1516739215.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:55.632Z,1516739215.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T20:26:55.633Z,1516739215.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:56.049Z,1516739216.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:26:56.050Z,1516739216.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:56.445Z,1516739216.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:26:56.446Z,1516739216.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:56.832Z,1516739216.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T20:26:56.833Z,1516739216.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:57.248Z,1516739217.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:26:57.249Z,1516739217.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:57.644Z,1516739217.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:26:57.645Z,1516739217.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:58.045Z,1516739218.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:26:58.046Z,1516739218.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:58.516Z,1516739218.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:26:58.517Z,1516739218.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:58.853Z,1516739218.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:26:58.854Z,1516739218.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:59.267Z,1516739219.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:26:59.268Z,1516739219.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:26:59.645Z,1516739219.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:26:59.645Z,1516739219.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:00.042Z,1516739220.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:27:00.043Z,1516739220.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:00.449Z,1516739220.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:27:00.450Z,1516739220.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:00.848Z,1516739220.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:27:00.849Z,1516739220.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:01.247Z,1516739221.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:27:01.248Z,1516739221.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:01.622Z,1516739221.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T20:27:01.644Z,1516739221.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:02.060Z,1516739222.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:27:02.061Z,1516739222.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:02.453Z,1516739222.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:27:02.455Z,1516739222.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:02.833Z,1516739222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s. 2018-01-23T20:27:02.833Z,1516739222.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:03.233Z,1516739223.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T20:27:03.234Z,1516739223.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:03.644Z,1516739223.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:27:03.645Z,1516739223.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:04.068Z,1516739224.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:27:04.069Z,1516739224.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:04.445Z,1516739224.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:27:04.446Z,1516739224.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:04.876Z,1516739224.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:27:04.877Z,1516739224.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:05.236Z,1516739225.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T20:27:05.237Z,1516739225.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:05.628Z,1516739225.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T20:27:05.629Z,1516739225.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:06.052Z,1516739226.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:06.443Z,1516739226.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:06.833Z,1516739226.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:07.260Z,1516739227.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:07.641Z,1516739227.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:08.037Z,1516739228.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:08.424Z,1516739228.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:08.823Z,1516739228.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:09.222Z,1516739229.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:09.644Z,1516739229.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:10.039Z,1516739230.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:10.449Z,1516739230.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:10.852Z,1516739230.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:11.216Z,1516739231.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:11.648Z,1516739231.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:12.052Z,1516739232.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:12.421Z,1516739232.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:12.837Z,1516739232.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:13.268Z,1516739233.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:13.622Z,1516739233.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:14.018Z,1516739234.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:14.416Z,1516739234.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:14.815Z,1516739234.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:15.215Z,1516739235.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:15.620Z,1516739235.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:16.022Z,1516739236.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:16.422Z,1516739236.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:16.834Z,1516739236.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:17.216Z,1516739237.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:17.615Z,1516739237.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:18.018Z,1516739238.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:18.414Z,1516739238.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:18.821Z,1516739238.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:19.219Z,1516739239.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:19.622Z,1516739239.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:20.021Z,1516739240.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:20.421Z,1516739240.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:20.805Z,1516739240.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:21.216Z,1516739241.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:21.629Z,1516739241.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:22.020Z,1516739242.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:22.425Z,1516739242.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:22.830Z,1516739242.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:23.197Z,1516739243.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:23.600Z,1516739243.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:24.033Z,1516739244.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:24.402Z,1516739244.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:24.805Z,1516739244.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:25.237Z,1516739245.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:25.630Z,1516739245.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:26.031Z,1516739246.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:26.439Z,1516739246.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:26.800Z,1516739246.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:27.238Z,1516739247.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:27.601Z,1516739247.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:28.014Z,1516739248.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:28.414Z,1516739248.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:28.814Z,1516739248.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:29.198Z,1516739249.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:29.601Z,1516739249.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:30.070Z,1516739250.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:30.397Z,1516739250.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:30.801Z,1516739250.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:31.213Z,1516739251.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:31.614Z,1516739251.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:32.018Z,1516739252.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:32.407Z,1516739252.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:32.835Z,1516739252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:33.209Z,1516739253.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:33.607Z,1516739253.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:34.019Z,1516739254.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:34.431Z,1516739254.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:34.833Z,1516739254.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:35.211Z,1516739255.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:35.606Z,1516739255.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:36.006Z,1516739256.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:36.406Z,1516739256.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:36.811Z,1516739256.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:37.210Z,1516739257.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:37.633Z,1516739257.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:38.018Z,1516739258.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:38.412Z,1516739258.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:38.806Z,1516739258.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:39.216Z,1516739259.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:39.616Z,1516739259.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:40.017Z,1516739260.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:40.425Z,1516739260.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:40.821Z,1516739260.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:41.253Z,1516739261.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:41.610Z,1516739261.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:42.012Z,1516739262.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:42.420Z,1516739262.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:42.821Z,1516739262.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:43.226Z,1516739263.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:43.629Z,1516739263.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:44.025Z,1516739264.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:44.413Z,1516739264.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:44.821Z,1516739264.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:45.213Z,1516739265.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:45.613Z,1516739265.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:46.025Z,1516739266.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:46.426Z,1516739266.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:46.827Z,1516739266.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:46.830Z,1516739266.830 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:27:46.830Z,1516739266.830 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:27:46.831Z,1516739266.831 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:27:46.831Z,1516739266.831 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:27:47.212Z,1516739267.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:47.215Z,1516739267.215 [Default:CheckIn:D] Stopped 2018-01-23T20:27:47.215Z,1516739267.215 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:27:47.624Z,1516739267.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1029.919271 min 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn:E] Stopped 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn] Stopped 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn](INFO): Running loop #101 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn] Running Loop=101 2018-01-23T20:27:47.628Z,1516739267.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:27:47.629Z,1516739267.629 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:27:48.025Z,1516739268.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:51.238Z,1516739271.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:51.385Z,1516739271.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:51.741Z,1516739271.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:52.141Z,1516739272.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:52.537Z,1516739272.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:52.927Z,1516739272.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:53.329Z,1516739273.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:53.733Z,1516739273.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:54.145Z,1516739274.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:54.538Z,1516739274.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:54.941Z,1516739274.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:55.335Z,1516739275.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:55.729Z,1516739275.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:56.140Z,1516739276.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:56.530Z,1516739276.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:56.945Z,1516739276.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:57.350Z,1516739277.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:57.739Z,1516739277.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:58.149Z,1516739278.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:58.525Z,1516739278.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:58.946Z,1516739278.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:59.355Z,1516739279.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:27:59.748Z,1516739279.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:00.148Z,1516739280.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:00.523Z,1516739280.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:00.930Z,1516739280.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:01.360Z,1516739281.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:01.734Z,1516739281.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:02.128Z,1516739282.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:02.533Z,1516739282.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:02.934Z,1516739282.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:03.337Z,1516739283.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:03.737Z,1516739283.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:04.129Z,1516739284.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:04.527Z,1516739284.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:04.939Z,1516739284.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:05.338Z,1516739285.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:05.741Z,1516739285.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:06.132Z,1516739286.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:06.528Z,1516739286.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:06.937Z,1516739286.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:07.341Z,1516739287.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:07.737Z,1516739287.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:08.129Z,1516739288.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:08.527Z,1516739288.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:08.937Z,1516739288.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:09.343Z,1516739289.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:09.741Z,1516739289.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:10.129Z,1516739290.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:10.528Z,1516739290.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:10.937Z,1516739290.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:11.337Z,1516739291.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:11.745Z,1516739291.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:12.130Z,1516739292.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:12.541Z,1516739292.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:12.941Z,1516739292.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:13.343Z,1516739293.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:13.747Z,1516739293.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:14.134Z,1516739294.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:14.539Z,1516739294.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:14.944Z,1516739294.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:15.348Z,1516739295.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:15.749Z,1516739295.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:16.142Z,1516739296.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:16.601Z,1516739296.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:16.953Z,1516739296.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:17.349Z,1516739297.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:17.739Z,1516739297.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:18.155Z,1516739298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:18.532Z,1516739298.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:18.956Z,1516739298.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:19.357Z,1516739299.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:19.752Z,1516739299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:20.128Z,1516739300.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:20.527Z,1516739300.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:20.929Z,1516739300.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:21.338Z,1516739301.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:21.741Z,1516739301.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:22.138Z,1516739302.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:22.533Z,1516739302.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:22.937Z,1516739302.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:23.336Z,1516739303.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:23.737Z,1516739303.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:24.138Z,1516739304.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:24.542Z,1516739304.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:24.949Z,1516739304.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:25.337Z,1516739305.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:25.736Z,1516739305.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:26.135Z,1516739306.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:26.530Z,1516739306.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:26.939Z,1516739306.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:27.349Z,1516739307.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:27.745Z,1516739307.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:28.142Z,1516739308.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:28.533Z,1516739308.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:28.933Z,1516739308.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:29.336Z,1516739309.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:29.737Z,1516739309.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:30.138Z,1516739310.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:30.549Z,1516739310.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:30.939Z,1516739310.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:31.333Z,1516739311.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:31.731Z,1516739311.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:32.133Z,1516739312.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:32.533Z,1516739312.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:32.941Z,1516739312.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:33.349Z,1516739313.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:33.742Z,1516739313.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:34.150Z,1516739314.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:34.536Z,1516739314.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:34.939Z,1516739314.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:35.341Z,1516739315.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:35.718Z,1516739315.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:36.141Z,1516739316.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:36.549Z,1516739316.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:36.953Z,1516739316.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:37.321Z,1516739317.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:37.720Z,1516739317.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:38.121Z,1516739318.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:38.532Z,1516739318.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:38.926Z,1516739318.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:39.330Z,1516739319.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:39.738Z,1516739319.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:40.142Z,1516739320.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:40.528Z,1516739320.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:40.928Z,1516739320.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:41.332Z,1516739321.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:41.728Z,1516739321.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:42.130Z,1516739322.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:42.534Z,1516739322.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:42.930Z,1516739322.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:43.326Z,1516739323.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:43.727Z,1516739323.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:44.126Z,1516739324.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:44.526Z,1516739324.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:44.926Z,1516739324.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:45.330Z,1516739325.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:45.734Z,1516739325.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:46.163Z,1516739326.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:46.532Z,1516739326.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:46.928Z,1516739326.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:47.332Z,1516739327.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:47.728Z,1516739327.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:48.131Z,1516739328.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:51.226Z,1516739331.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:51.372Z,1516739331.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:51.725Z,1516739331.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:52.141Z,1516739332.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:52.525Z,1516739332.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:52.933Z,1516739332.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:53.334Z,1516739333.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:53.741Z,1516739333.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:54.134Z,1516739334.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:54.532Z,1516739334.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:54.927Z,1516739334.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:55.331Z,1516739335.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:55.725Z,1516739335.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:56.143Z,1516739336.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:56.541Z,1516739336.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:56.945Z,1516739336.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:57.325Z,1516739337.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:57.725Z,1516739337.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:58.145Z,1516739338.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:58.530Z,1516739338.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:58.929Z,1516739338.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:59.336Z,1516739339.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:28:59.745Z,1516739339.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:00.137Z,1516739340.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:00.528Z,1516739340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:00.925Z,1516739340.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:01.333Z,1516739341.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:01.736Z,1516739341.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:02.134Z,1516739342.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:02.537Z,1516739342.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:02.952Z,1516739342.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:03.335Z,1516739343.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:03.733Z,1516739343.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:04.138Z,1516739344.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:04.530Z,1516739344.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:04.939Z,1516739344.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:05.338Z,1516739345.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:05.748Z,1516739345.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:06.145Z,1516739346.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:06.545Z,1516739346.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:06.939Z,1516739346.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:07.316Z,1516739347.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:07.718Z,1516739347.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:08.144Z,1516739348.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:08.553Z,1516739348.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:08.949Z,1516739348.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:09.321Z,1516739349.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:09.729Z,1516739349.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:10.133Z,1516739350.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:10.533Z,1516739350.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:10.937Z,1516739350.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:11.335Z,1516739351.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:11.738Z,1516739351.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:12.134Z,1516739352.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:12.536Z,1516739352.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:12.933Z,1516739352.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:13.330Z,1516739353.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:13.733Z,1516739353.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:14.141Z,1516739354.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:14.539Z,1516739354.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:14.945Z,1516739354.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:15.337Z,1516739355.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:15.739Z,1516739355.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:16.129Z,1516739356.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:16.530Z,1516739356.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:16.932Z,1516739356.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:17.339Z,1516739357.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:17.739Z,1516739357.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:18.141Z,1516739358.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:18.531Z,1516739358.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:18.941Z,1516739358.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:19.331Z,1516739359.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:19.727Z,1516739359.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:20.141Z,1516739360.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:20.549Z,1516739360.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:20.938Z,1516739360.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:21.333Z,1516739361.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:21.735Z,1516739361.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:22.135Z,1516739362.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:22.531Z,1516739362.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:22.939Z,1516739362.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:23.341Z,1516739363.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:23.740Z,1516739363.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:24.137Z,1516739364.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:24.528Z,1516739364.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:24.933Z,1516739364.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:25.353Z,1516739365.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:25.728Z,1516739365.728 [PNI_TCM](ERROR): CRC does not match. Expected:0x5184 got:0x50368 2018-01-23T20:29:25.745Z,1516739365.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:26.145Z,1516739366.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:26.542Z,1516739366.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:26.938Z,1516739366.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:27.335Z,1516739367.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:27.728Z,1516739367.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:28.138Z,1516739368.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:28.545Z,1516739368.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:28.937Z,1516739368.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:29.341Z,1516739369.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:29.739Z,1516739369.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:30.153Z,1516739370.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:30.525Z,1516739370.525 [PNI_TCM](ERROR): CRC does not match. Expected:0x49136 got:0x50202 2018-01-23T20:29:30.545Z,1516739370.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:30.933Z,1516739370.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:31.336Z,1516739371.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:31.338Z,1516739371.338 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:31.338Z,1516739371.338 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 343 2018-01-23T20:29:31.338Z,1516739371.338 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:29:31.351Z,1516739371.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:29:31.739Z,1516739371.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:31.751Z,1516739371.751 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:29:31.752Z,1516739371.752 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 343 2018-01-23T20:29:32.139Z,1516739372.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:32.140Z,1516739372.140 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:29:32.141Z,1516739372.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:29:32.141Z,1516739372.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:29:32.544Z,1516739372.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:32.953Z,1516739372.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:33.349Z,1516739373.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:33.734Z,1516739373.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:34.139Z,1516739374.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:34.530Z,1516739374.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:34.936Z,1516739374.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:35.344Z,1516739375.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:35.746Z,1516739375.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:36.142Z,1516739376.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:36.540Z,1516739376.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:36.933Z,1516739376.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:37.330Z,1516739377.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:37.734Z,1516739377.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:38.141Z,1516739378.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:38.550Z,1516739378.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:38.949Z,1516739378.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:39.341Z,1516739379.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:39.742Z,1516739379.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:40.141Z,1516739380.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:40.540Z,1516739380.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:40.938Z,1516739380.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:41.352Z,1516739381.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:41.749Z,1516739381.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:42.149Z,1516739382.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:42.549Z,1516739382.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:42.941Z,1516739382.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:43.324Z,1516739383.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:43.719Z,1516739383.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:44.150Z,1516739384.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:44.557Z,1516739384.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:44.930Z,1516739384.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:45.325Z,1516739385.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:45.731Z,1516739385.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:46.123Z,1516739386.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:46.540Z,1516739386.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:46.540Z,1516739386.540 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 343 2018-01-23T20:29:46.540Z,1516739386.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:29:46.559Z,1516739386.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:46.559Z,1516739386.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 343 2018-01-23T20:29:46.559Z,1516739386.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:29:46.593Z,1516739386.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:29:46.593Z,1516739386.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:29:46.946Z,1516739386.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:29:46.946Z,1516739386.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 343 2018-01-23T20:29:46.947Z,1516739386.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:29:46.948Z,1516739386.948 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 343 2018-01-23T20:29:47.343Z,1516739387.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:29:47.343Z,1516739387.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:29:47.344Z,1516739387.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:29:47.344Z,1516739387.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:29:47.344Z,1516739387.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:29:47.345Z,1516739387.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:29:47.767Z,1516739387.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:29:47.768Z,1516739387.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:48.134Z,1516739388.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:29:48.135Z,1516739388.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:51.222Z,1516739391.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T20:29:51.223Z,1516739391.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:51.366Z,1516739391.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:29:51.367Z,1516739391.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:51.652Z,1516739391.652 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T20:29:51.652Z,1516739391.652 [NAL9602] Data Fault, FailCount= 4 2018-01-23T20:29:51.652Z,1516739391.652 [NAL9602](ERROR): Data Fault 2018-01-23T20:29:51.704Z,1516739391.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:29:51.705Z,1516739391.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:51.735Z,1516739391.735 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T20:29:52.052Z,1516739392.052 [NAL9602](INFO): Powering down 2018-01-23T20:29:52.095Z,1516739392.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:29:52.096Z,1516739392.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:52.496Z,1516739392.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:29:52.497Z,1516739392.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:52.895Z,1516739392.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:29:52.896Z,1516739392.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:52.910Z,1516739392.910 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T20:29:52.910Z,1516739392.910 [NAL9602] No Fault, FailCount= 4 2018-01-23T20:29:53.298Z,1516739393.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:29:53.299Z,1516739393.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:53.694Z,1516739393.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:29:53.695Z,1516739393.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:54.095Z,1516739394.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:29:54.096Z,1516739394.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:54.498Z,1516739394.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:29:54.499Z,1516739394.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:54.892Z,1516739394.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:29:54.892Z,1516739394.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:55.296Z,1516739395.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:29:55.297Z,1516739395.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:55.702Z,1516739395.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:29:55.703Z,1516739395.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:56.084Z,1516739396.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s. 2018-01-23T20:29:56.085Z,1516739396.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:56.499Z,1516739396.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:29:56.500Z,1516739396.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:56.900Z,1516739396.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:29:56.901Z,1516739396.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:57.276Z,1516739397.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T20:29:57.277Z,1516739397.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:57.681Z,1516739397.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s. 2018-01-23T20:29:57.682Z,1516739397.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:58.078Z,1516739398.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s. 2018-01-23T20:29:58.079Z,1516739398.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:58.486Z,1516739398.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T20:29:58.487Z,1516739398.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:58.916Z,1516739398.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:29:58.917Z,1516739398.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:59.290Z,1516739399.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:29:59.291Z,1516739399.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:29:59.682Z,1516739399.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s. 2018-01-23T20:29:59.684Z,1516739399.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:00.112Z,1516739400.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:30:00.113Z,1516739400.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:00.485Z,1516739400.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T20:30:00.486Z,1516739400.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:00.884Z,1516739400.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T20:30:00.885Z,1516739400.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:01.291Z,1516739401.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:30:01.292Z,1516739401.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:01.689Z,1516739401.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:30:01.690Z,1516739401.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:02.086Z,1516739402.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T20:30:02.087Z,1516739402.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:02.486Z,1516739402.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s. 2018-01-23T20:30:02.491Z,1516739402.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:02.886Z,1516739402.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s. 2018-01-23T20:30:02.887Z,1516739402.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:03.284Z,1516739403.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s. 2018-01-23T20:30:03.285Z,1516739403.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:03.690Z,1516739403.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:30:03.695Z,1516739403.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:04.086Z,1516739404.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T20:30:04.087Z,1516739404.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:04.487Z,1516739404.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T20:30:04.488Z,1516739404.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:04.889Z,1516739404.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:30:04.890Z,1516739404.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:05.289Z,1516739405.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:30:05.290Z,1516739405.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:05.692Z,1516739405.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:30:05.693Z,1516739405.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:06.094Z,1516739406.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:30:06.099Z,1516739406.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:06.492Z,1516739406.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:30:06.493Z,1516739406.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:06.901Z,1516739406.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:07.294Z,1516739407.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:07.708Z,1516739407.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:08.085Z,1516739408.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:08.496Z,1516739408.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:08.879Z,1516739408.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:09.277Z,1516739409.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:09.706Z,1516739409.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:10.109Z,1516739410.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:10.503Z,1516739410.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:10.886Z,1516739410.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:11.291Z,1516739411.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:11.691Z,1516739411.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:12.087Z,1516739412.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:12.492Z,1516739412.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:12.884Z,1516739412.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:13.290Z,1516739413.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:13.691Z,1516739413.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:14.084Z,1516739414.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:14.498Z,1516739414.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:14.886Z,1516739414.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:15.284Z,1516739415.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:15.692Z,1516739415.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:16.086Z,1516739416.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:16.486Z,1516739416.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:16.893Z,1516739416.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:17.290Z,1516739417.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:17.693Z,1516739417.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:18.096Z,1516739418.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:18.486Z,1516739418.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:18.884Z,1516739418.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:19.286Z,1516739419.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:19.690Z,1516739419.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:20.084Z,1516739420.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:20.497Z,1516739420.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:20.886Z,1516739420.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:21.286Z,1516739421.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:21.708Z,1516739421.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:22.090Z,1516739422.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:22.452Z,1516739422.452 [NAL9602](INFO): Powering up NAL9602 2018-01-23T20:30:22.496Z,1516739422.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:22.889Z,1516739422.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:23.292Z,1516739423.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:23.696Z,1516739423.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:24.090Z,1516739424.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:24.493Z,1516739424.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:24.888Z,1516739424.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:25.293Z,1516739425.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:25.694Z,1516739425.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:26.097Z,1516739426.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:26.493Z,1516739426.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:26.896Z,1516739426.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:27.297Z,1516739427.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:27.694Z,1516739427.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:28.099Z,1516739428.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:28.494Z,1516739428.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:28.897Z,1516739428.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:29.295Z,1516739429.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:29.698Z,1516739429.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:30.096Z,1516739430.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:30.501Z,1516739430.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:30.884Z,1516739430.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:31.299Z,1516739431.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:31.701Z,1516739431.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:32.076Z,1516739432.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:32.504Z,1516739432.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:32.909Z,1516739432.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:33.252Z,1516739433.252 [NAL9602](INFO): NAL9602 initialized 2018-01-23T20:30:33.299Z,1516739433.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:33.705Z,1516739433.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:34.110Z,1516739434.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:34.513Z,1516739434.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:34.913Z,1516739434.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:35.283Z,1516739435.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:35.715Z,1516739435.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:36.117Z,1516739436.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:36.513Z,1516739436.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:36.894Z,1516739436.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:37.318Z,1516739437.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:37.688Z,1516739437.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:38.084Z,1516739438.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:38.484Z,1516739438.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:38.887Z,1516739438.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:39.290Z,1516739439.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:39.713Z,1516739439.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:40.096Z,1516739440.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:40.489Z,1516739440.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:40.893Z,1516739440.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:41.289Z,1516739441.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:41.714Z,1516739441.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:42.093Z,1516739442.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:42.494Z,1516739442.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:42.893Z,1516739442.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:43.306Z,1516739443.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:43.694Z,1516739443.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:44.090Z,1516739444.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:44.494Z,1516739444.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:44.896Z,1516739444.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:45.303Z,1516739445.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:45.707Z,1516739445.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:46.099Z,1516739446.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:46.491Z,1516739446.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:46.890Z,1516739446.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:47.305Z,1516739447.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:47.697Z,1516739447.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:48.097Z,1516739448.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:48.505Z,1516739448.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:51.601Z,1516739451.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:51.741Z,1516739451.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:52.089Z,1516739452.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:52.495Z,1516739452.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:52.865Z,1516739452.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:53.287Z,1516739453.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:53.693Z,1516739453.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:54.092Z,1516739454.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:54.489Z,1516739454.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:54.896Z,1516739454.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:55.265Z,1516739455.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:55.665Z,1516739455.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:56.063Z,1516739456.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:56.487Z,1516739456.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:56.892Z,1516739456.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:57.283Z,1516739457.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:57.677Z,1516739457.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:58.067Z,1516739458.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:58.468Z,1516739458.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:58.866Z,1516739458.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:59.277Z,1516739459.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:30:59.673Z,1516739459.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:00.074Z,1516739460.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:00.469Z,1516739460.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:00.868Z,1516739460.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:01.268Z,1516739461.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:01.670Z,1516739461.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:02.068Z,1516739462.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:02.474Z,1516739462.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:02.886Z,1516739462.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:03.284Z,1516739463.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:03.673Z,1516739463.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:04.069Z,1516739464.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:04.479Z,1516739464.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:04.875Z,1516739464.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:05.285Z,1516739465.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:05.678Z,1516739465.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:06.089Z,1516739466.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:06.473Z,1516739466.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:06.873Z,1516739466.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:07.266Z,1516739467.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:07.670Z,1516739467.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:08.072Z,1516739468.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:08.477Z,1516739468.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:08.885Z,1516739468.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:09.288Z,1516739469.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:09.667Z,1516739469.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:10.077Z,1516739470.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:10.468Z,1516739470.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:10.877Z,1516739470.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:11.289Z,1516739471.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:11.688Z,1516739471.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:12.077Z,1516739472.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:12.469Z,1516739472.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:12.872Z,1516739472.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:13.273Z,1516739473.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:13.675Z,1516739473.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:14.070Z,1516739474.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:14.478Z,1516739474.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:14.882Z,1516739474.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:15.278Z,1516739475.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:15.673Z,1516739475.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:16.075Z,1516739476.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:16.480Z,1516739476.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:16.873Z,1516739476.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:17.280Z,1516739477.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:17.682Z,1516739477.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:18.088Z,1516739478.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:18.473Z,1516739478.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:18.876Z,1516739478.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:19.273Z,1516739479.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:19.674Z,1516739479.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:20.078Z,1516739480.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:20.487Z,1516739480.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:20.887Z,1516739480.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:21.293Z,1516739481.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:21.675Z,1516739481.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:22.080Z,1516739482.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:22.482Z,1516739482.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:22.866Z,1516739482.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:23.294Z,1516739483.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:23.692Z,1516739483.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:24.082Z,1516739484.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:24.481Z,1516739484.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:24.884Z,1516739484.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:25.257Z,1516739485.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:25.660Z,1516739485.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:26.064Z,1516739486.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:26.490Z,1516739486.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:26.897Z,1516739486.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:27.301Z,1516739487.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:27.661Z,1516739487.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:28.069Z,1516739488.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:28.468Z,1516739488.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:28.864Z,1516739488.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:29.274Z,1516739489.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:29.699Z,1516739489.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:30.070Z,1516739490.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:30.466Z,1516739490.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:30.884Z,1516739490.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:31.265Z,1516739491.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:31.669Z,1516739491.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:32.068Z,1516739492.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:32.477Z,1516739492.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:32.885Z,1516739492.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:33.289Z,1516739493.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:33.669Z,1516739493.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:34.073Z,1516739494.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:34.480Z,1516739494.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:34.877Z,1516739494.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:35.281Z,1516739495.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:35.689Z,1516739495.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:36.078Z,1516739496.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:36.477Z,1516739496.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:36.881Z,1516739496.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:37.279Z,1516739497.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:37.672Z,1516739497.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:38.081Z,1516739498.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:38.486Z,1516739498.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:38.887Z,1516739498.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:39.301Z,1516739499.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:39.669Z,1516739499.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:40.069Z,1516739500.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:40.469Z,1516739500.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:40.873Z,1516739500.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:41.297Z,1516739501.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:41.678Z,1516739501.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:42.070Z,1516739502.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:42.473Z,1516739502.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:42.869Z,1516739502.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:43.271Z,1516739503.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:43.675Z,1516739503.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:44.071Z,1516739504.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:44.467Z,1516739504.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:44.874Z,1516739504.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:45.275Z,1516739505.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:45.675Z,1516739505.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:46.077Z,1516739506.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:46.471Z,1516739506.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:46.875Z,1516739506.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:47.277Z,1516739507.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:47.705Z,1516739507.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:48.076Z,1516739508.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:48.484Z,1516739508.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:48.916Z,1516739508.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:54.115Z,1516739514.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:54.306Z,1516739514.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:54.674Z,1516739514.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:55.062Z,1516739515.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:55.465Z,1516739515.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:55.876Z,1516739515.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:56.269Z,1516739516.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:56.680Z,1516739516.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:57.078Z,1516739517.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:57.449Z,1516739517.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:57.847Z,1516739517.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:58.282Z,1516739518.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:58.650Z,1516739518.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:59.058Z,1516739519.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:59.464Z,1516739519.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:31:59.853Z,1516739519.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:00.254Z,1516739520.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:00.697Z,1516739520.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:01.066Z,1516739521.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:01.473Z,1516739521.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:01.873Z,1516739521.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:02.245Z,1516739522.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:02.645Z,1516739522.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:03.076Z,1516739523.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:03.442Z,1516739523.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:03.851Z,1516739523.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:04.274Z,1516739524.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:04.661Z,1516739524.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:05.094Z,1516739525.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:05.497Z,1516739525.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:05.850Z,1516739525.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:06.253Z,1516739526.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:06.684Z,1516739526.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:07.074Z,1516739527.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:07.461Z,1516739527.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:07.862Z,1516739527.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:08.234Z,1516739528.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:08.631Z,1516739528.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:09.036Z,1516739529.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:09.441Z,1516739529.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:09.841Z,1516739529.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:10.235Z,1516739530.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:10.638Z,1516739530.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:11.038Z,1516739531.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:11.444Z,1516739531.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:11.834Z,1516739531.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:12.241Z,1516739532.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:12.640Z,1516739532.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:13.039Z,1516739533.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:13.452Z,1516739533.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:13.846Z,1516739533.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:14.253Z,1516739534.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:14.633Z,1516739534.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:15.049Z,1516739535.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:15.441Z,1516739535.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:15.840Z,1516739535.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:16.250Z,1516739536.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:16.646Z,1516739536.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:17.061Z,1516739537.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:17.492Z,1516739537.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:17.839Z,1516739537.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:18.240Z,1516739538.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:18.644Z,1516739538.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:19.034Z,1516739539.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:19.453Z,1516739539.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:19.847Z,1516739539.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:20.242Z,1516739540.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:20.639Z,1516739540.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:21.042Z,1516739541.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:21.433Z,1516739541.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:21.836Z,1516739541.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:22.223Z,1516739542.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:22.669Z,1516739542.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:23.053Z,1516739543.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:23.460Z,1516739543.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:23.853Z,1516739543.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:24.233Z,1516739544.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:24.633Z,1516739544.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:25.037Z,1516739545.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:25.434Z,1516739545.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:25.846Z,1516739545.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:26.234Z,1516739546.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:26.630Z,1516739546.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:27.036Z,1516739547.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:27.433Z,1516739547.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:27.830Z,1516739547.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:28.230Z,1516739548.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:28.634Z,1516739548.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:29.038Z,1516739549.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:29.434Z,1516739549.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:29.828Z,1516739549.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:30.237Z,1516739550.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:30.635Z,1516739550.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:31.030Z,1516739551.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:31.441Z,1516739551.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:31.840Z,1516739551.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:32.252Z,1516739552.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:32.262Z,1516739552.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:32.262Z,1516739552.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 344 2018-01-23T20:32:32.263Z,1516739552.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:32:32.286Z,1516739552.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:32:32.643Z,1516739552.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:32.656Z,1516739552.656 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:32:32.656Z,1516739552.656 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 344 2018-01-23T20:32:33.045Z,1516739553.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:33.047Z,1516739553.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:32:33.047Z,1516739553.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:32:33.047Z,1516739553.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:32:33.421Z,1516739553.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:33.824Z,1516739553.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:34.223Z,1516739554.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:34.638Z,1516739554.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:35.081Z,1516739555.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:35.445Z,1516739555.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:35.822Z,1516739555.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:36.228Z,1516739556.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:36.626Z,1516739556.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:37.025Z,1516739557.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:37.442Z,1516739557.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:37.846Z,1516739557.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:38.237Z,1516739558.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:38.640Z,1516739558.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:39.043Z,1516739559.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:39.441Z,1516739559.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:39.835Z,1516739559.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:40.244Z,1516739560.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:40.646Z,1516739560.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:41.046Z,1516739561.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:41.451Z,1516739561.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:41.833Z,1516739561.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:42.237Z,1516739562.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:42.636Z,1516739562.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:43.072Z,1516739563.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:43.443Z,1516739563.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:43.852Z,1516739563.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:44.252Z,1516739564.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:44.637Z,1516739564.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:45.035Z,1516739565.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:45.433Z,1516739565.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:45.837Z,1516739565.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:46.241Z,1516739566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:46.644Z,1516739566.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:47.056Z,1516739567.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:47.448Z,1516739567.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:47.449Z,1516739567.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 344 2018-01-23T20:32:47.449Z,1516739567.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:32:47.450Z,1516739567.450 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:47.451Z,1516739567.451 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 344 2018-01-23T20:32:47.451Z,1516739567.451 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:32:47.463Z,1516739567.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:32:47.463Z,1516739567.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:32:47.842Z,1516739567.842 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:27:47.6Z 2018-01-23T20:32:47.842Z,1516739567.842 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:32:47.842Z,1516739567.842 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:32:47.860Z,1516739567.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:32:47.860Z,1516739567.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 344 2018-01-23T20:32:47.860Z,1516739567.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:32:47.860Z,1516739567.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 344 2018-01-23T20:32:48.242Z,1516739568.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:32:48.242Z,1516739568.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:32:48.243Z,1516739568.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:32:48.243Z,1516739568.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:32:48.244Z,1516739568.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:32:48.244Z,1516739568.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:32:48.763Z,1516739568.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T20:32:48.764Z,1516739568.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:49.032Z,1516739569.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:32:49.033Z,1516739569.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:52.142Z,1516739572.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s. 2018-01-23T20:32:52.168Z,1516739572.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:52.227Z,1516739572.227 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0404.lzma 2018-01-23T20:32:52.304Z,1516739572.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T20:32:52.305Z,1516739572.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:52.659Z,1516739572.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:32:52.660Z,1516739572.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:53.002Z,1516739573.002 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0404.lzma.bak 2018-01-23T20:32:53.002Z,1516739573.002 [DataOverHttps](INFO): SBD MOMSN=7756599 2018-01-23T20:32:53.071Z,1516739573.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:32:53.072Z,1516739573.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:53.876Z,1516739573.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:32:53.877Z,1516739573.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:54.018Z,1516739574.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s. 2018-01-23T20:32:54.019Z,1516739574.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:57.050Z,1516739577.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:32:57.051Z,1516739577.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:57.204Z,1516739577.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T20:32:57.205Z,1516739577.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:57.572Z,1516739577.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T20:32:57.573Z,1516739577.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:57.956Z,1516739577.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T20:32:57.957Z,1516739577.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:58.352Z,1516739578.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T20:32:58.353Z,1516739578.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:32:58.756Z,1516739578.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T20:32:58.757Z,1516739578.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:01.885Z,1516739581.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:33:01.885Z,1516739581.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:01.966Z,1516739581.966 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0405.lzma 2018-01-23T20:33:02.033Z,1516739582.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s. 2018-01-23T20:33:02.034Z,1516739582.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:02.380Z,1516739582.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T20:33:02.381Z,1516739582.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:02.710Z,1516739582.710 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0405.lzma.bak 2018-01-23T20:33:02.710Z,1516739582.710 [DataOverHttps](INFO): SBD MOMSN=7756601 2018-01-23T20:33:02.786Z,1516739582.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T20:33:02.787Z,1516739582.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:03.402Z,1516739583.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:33:03.403Z,1516739583.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:03.406Z,1516739583.406 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:33:03.406Z,1516739583.406 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:33:03.406Z,1516739583.406 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:33:03.574Z,1516739583.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T20:33:03.575Z,1516739583.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:06.664Z,1516739586.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:33:06.665Z,1516739586.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:06.824Z,1516739586.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s. 2018-01-23T20:33:06.825Z,1516739586.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:07.200Z,1516739587.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s. 2018-01-23T20:33:07.201Z,1516739587.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:07.596Z,1516739587.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:07.993Z,1516739587.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:08.397Z,1516739588.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:08.776Z,1516739588.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:09.173Z,1516739589.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:09.579Z,1516739589.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:09.977Z,1516739589.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:10.375Z,1516739590.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:10.771Z,1516739590.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:11.173Z,1516739591.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:11.577Z,1516739591.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:11.973Z,1516739591.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:12.376Z,1516739592.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:12.785Z,1516739592.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:13.179Z,1516739593.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:13.591Z,1516739593.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:13.980Z,1516739593.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:14.386Z,1516739594.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:14.786Z,1516739594.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:15.183Z,1516739595.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:15.579Z,1516739595.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:15.975Z,1516739595.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:16.382Z,1516739596.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:16.793Z,1516739596.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:17.186Z,1516739597.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:17.673Z,1516739597.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:17.977Z,1516739597.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:18.389Z,1516739598.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:18.786Z,1516739598.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:19.183Z,1516739599.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:19.588Z,1516739599.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:19.981Z,1516739599.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:20.382Z,1516739600.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:20.792Z,1516739600.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:21.186Z,1516739601.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:21.582Z,1516739601.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:21.981Z,1516739601.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:22.389Z,1516739602.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:22.787Z,1516739602.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:23.192Z,1516739603.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:23.582Z,1516739603.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:23.979Z,1516739603.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:24.386Z,1516739604.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:24.789Z,1516739604.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:25.182Z,1516739605.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:25.580Z,1516739605.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:25.983Z,1516739605.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:26.383Z,1516739606.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:26.794Z,1516739606.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:27.195Z,1516739607.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:27.594Z,1516739607.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:27.967Z,1516739607.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:28.365Z,1516739608.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:28.772Z,1516739608.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:29.175Z,1516739609.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:29.574Z,1516739609.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:29.997Z,1516739609.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:30.404Z,1516739610.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:30.769Z,1516739610.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:31.173Z,1516739611.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:31.585Z,1516739611.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:31.972Z,1516739611.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:32.381Z,1516739612.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:32.810Z,1516739612.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:33.175Z,1516739613.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:33.574Z,1516739613.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:33.972Z,1516739613.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:34.369Z,1516739614.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:34.770Z,1516739614.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:35.170Z,1516739615.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:35.574Z,1516739615.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:35.978Z,1516739615.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:36.377Z,1516739616.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:36.769Z,1516739616.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:37.172Z,1516739617.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:37.571Z,1516739617.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:37.970Z,1516739617.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:38.377Z,1516739618.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:38.778Z,1516739618.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:39.177Z,1516739619.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:39.577Z,1516739619.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:39.972Z,1516739619.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:40.370Z,1516739620.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:40.780Z,1516739620.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:41.176Z,1516739621.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:41.585Z,1516739621.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:41.989Z,1516739621.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:42.382Z,1516739622.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:42.771Z,1516739622.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:43.174Z,1516739623.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:43.576Z,1516739623.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:43.975Z,1516739623.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:44.389Z,1516739624.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:44.786Z,1516739624.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:45.186Z,1516739625.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:45.589Z,1516739625.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:45.977Z,1516739625.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:46.376Z,1516739626.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:46.789Z,1516739626.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:47.174Z,1516739627.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:47.586Z,1516739627.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:47.986Z,1516739627.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:48.383Z,1516739628.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:48.775Z,1516739628.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:49.186Z,1516739629.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:49.577Z,1516739629.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:49.975Z,1516739629.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:50.382Z,1516739630.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:50.784Z,1516739630.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:51.193Z,1516739631.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:51.585Z,1516739631.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:51.976Z,1516739631.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:52.378Z,1516739632.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:52.781Z,1516739632.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:53.185Z,1516739633.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:53.586Z,1516739633.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:53.993Z,1516739633.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:54.383Z,1516739634.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:54.780Z,1516739634.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:55.183Z,1516739635.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:55.585Z,1516739635.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:55.970Z,1516739635.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:56.383Z,1516739636.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:56.794Z,1516739636.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:57.193Z,1516739637.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:57.585Z,1516739637.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:57.993Z,1516739637.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:58.361Z,1516739638.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:58.764Z,1516739638.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:59.167Z,1516739639.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:59.595Z,1516739639.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:33:59.997Z,1516739639.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:00.400Z,1516739640.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:00.764Z,1516739640.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:01.177Z,1516739641.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:01.568Z,1516739641.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:01.972Z,1516739641.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:02.371Z,1516739642.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:02.777Z,1516739642.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:03.174Z,1516739643.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:03.578Z,1516739643.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:03.972Z,1516739643.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:07.066Z,1516739647.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:07.212Z,1516739647.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:07.561Z,1516739647.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:07.958Z,1516739647.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:08.358Z,1516739648.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:08.757Z,1516739648.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:09.161Z,1516739649.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:09.557Z,1516739649.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:09.932Z,1516739649.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:10.332Z,1516739650.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:10.738Z,1516739650.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:11.162Z,1516739651.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:11.546Z,1516739651.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:11.937Z,1516739651.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:12.337Z,1516739652.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:12.732Z,1516739652.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:13.130Z,1516739653.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:13.534Z,1516739653.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:13.937Z,1516739653.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:14.334Z,1516739654.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:14.732Z,1516739654.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:15.136Z,1516739655.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:15.537Z,1516739655.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:15.931Z,1516739655.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:16.330Z,1516739656.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:16.734Z,1516739656.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:17.138Z,1516739657.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:17.540Z,1516739657.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:17.937Z,1516739657.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:18.333Z,1516739658.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:18.732Z,1516739658.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:19.131Z,1516739659.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:19.546Z,1516739659.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:19.942Z,1516739659.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:20.339Z,1516739660.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:20.740Z,1516739660.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:21.137Z,1516739661.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:21.536Z,1516739661.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:21.949Z,1516739661.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:22.337Z,1516739662.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:22.753Z,1516739662.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:23.145Z,1516739663.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:23.543Z,1516739663.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:23.934Z,1516739663.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:24.334Z,1516739664.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:24.733Z,1516739664.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:25.136Z,1516739665.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:25.542Z,1516739665.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:25.952Z,1516739665.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:26.344Z,1516739666.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:26.739Z,1516739666.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:27.135Z,1516739667.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:27.545Z,1516739667.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:27.945Z,1516739667.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:28.342Z,1516739668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:28.739Z,1516739668.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:29.139Z,1516739669.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:29.542Z,1516739669.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:29.946Z,1516739669.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:30.342Z,1516739670.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:30.745Z,1516739670.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:31.133Z,1516739671.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:31.543Z,1516739671.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:31.946Z,1516739671.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:32.342Z,1516739672.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:32.734Z,1516739672.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:33.143Z,1516739673.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:33.543Z,1516739673.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:33.945Z,1516739673.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:34.351Z,1516739674.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:34.734Z,1516739674.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:35.141Z,1516739675.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:35.547Z,1516739675.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:35.953Z,1516739675.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:36.342Z,1516739676.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:36.736Z,1516739676.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:37.139Z,1516739677.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:37.543Z,1516739677.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:37.946Z,1516739677.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:38.342Z,1516739678.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:38.355Z,1516739678.355 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:34:38.739Z,1516739678.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:39.144Z,1516739679.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:39.545Z,1516739679.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:39.945Z,1516739679.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:40.351Z,1516739680.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:40.736Z,1516739680.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:41.143Z,1516739681.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:41.542Z,1516739681.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:41.948Z,1516739681.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:42.346Z,1516739682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:42.732Z,1516739682.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:43.125Z,1516739683.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:43.553Z,1516739683.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:43.956Z,1516739683.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:44.354Z,1516739684.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:44.729Z,1516739684.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:45.128Z,1516739685.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:45.555Z,1516739685.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:45.961Z,1516739685.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:46.363Z,1516739686.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:46.730Z,1516739686.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:47.136Z,1516739687.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:47.563Z,1516739687.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:47.962Z,1516739687.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:48.334Z,1516739688.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:48.732Z,1516739688.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:49.130Z,1516739689.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:49.534Z,1516739689.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:49.964Z,1516739689.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:50.341Z,1516739690.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:50.733Z,1516739690.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:51.140Z,1516739691.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:51.541Z,1516739691.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:51.938Z,1516739691.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:52.334Z,1516739692.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:52.730Z,1516739692.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:53.137Z,1516739693.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:53.546Z,1516739693.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:53.946Z,1516739693.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:54.338Z,1516739694.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:54.733Z,1516739694.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:55.131Z,1516739695.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:55.550Z,1516739695.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:55.942Z,1516739695.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:56.347Z,1516739696.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:56.735Z,1516739696.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:57.133Z,1516739697.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:57.546Z,1516739697.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:57.945Z,1516739697.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:58.346Z,1516739698.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:58.737Z,1516739698.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:59.134Z,1516739699.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:59.548Z,1516739699.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:34:59.946Z,1516739699.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:00.346Z,1516739700.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:00.735Z,1516739700.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:01.135Z,1516739701.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:01.557Z,1516739701.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:01.950Z,1516739701.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:02.346Z,1516739702.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:02.743Z,1516739702.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:03.147Z,1516739703.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:03.546Z,1516739703.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:03.958Z,1516739703.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:04.348Z,1516739704.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:07.436Z,1516739707.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:07.546Z,1516739707.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:07.940Z,1516739707.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:08.342Z,1516739708.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:08.738Z,1516739708.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:09.141Z,1516739709.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:09.514Z,1516739709.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:09.916Z,1516739709.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:10.317Z,1516739710.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:10.726Z,1516739710.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:11.129Z,1516739711.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:11.533Z,1516739711.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:11.915Z,1516739711.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:12.318Z,1516739712.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:12.725Z,1516739712.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:13.118Z,1516739713.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:13.525Z,1516739713.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:13.931Z,1516739713.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:14.333Z,1516739714.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:14.736Z,1516739714.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:15.121Z,1516739715.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:15.517Z,1516739715.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:15.918Z,1516739715.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:16.329Z,1516739716.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:16.726Z,1516739716.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:17.130Z,1516739717.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:17.527Z,1516739717.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:17.924Z,1516739717.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:18.325Z,1516739718.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:18.717Z,1516739718.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:19.118Z,1516739719.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:19.525Z,1516739719.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:19.927Z,1516739719.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:20.329Z,1516739720.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:20.728Z,1516739720.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:21.126Z,1516739721.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:21.524Z,1516739721.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:21.920Z,1516739721.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:22.318Z,1516739722.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:22.730Z,1516739722.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:23.157Z,1516739723.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:23.531Z,1516739723.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:23.917Z,1516739723.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:24.319Z,1516739724.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:24.731Z,1516739724.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:25.118Z,1516739725.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:25.516Z,1516739725.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:25.930Z,1516739725.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:26.333Z,1516739726.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:26.733Z,1516739726.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:27.124Z,1516739727.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:27.521Z,1516739727.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:27.933Z,1516739727.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:28.324Z,1516739728.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:28.737Z,1516739728.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:29.133Z,1516739729.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:29.529Z,1516739729.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:29.929Z,1516739729.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:30.318Z,1516739730.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:30.718Z,1516739730.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:31.119Z,1516739731.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:31.527Z,1516739731.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:31.926Z,1516739731.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:32.329Z,1516739732.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:32.727Z,1516739732.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:33.120Z,1516739733.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:33.122Z,1516739733.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:33.122Z,1516739733.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 345 2018-01-23T20:35:33.122Z,1516739733.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:35:33.134Z,1516739733.134 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:35:33.529Z,1516739733.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:33.541Z,1516739733.541 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:35:33.541Z,1516739733.541 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 345 2018-01-23T20:35:33.922Z,1516739733.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:33.927Z,1516739733.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:35:33.927Z,1516739733.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:35:33.928Z,1516739733.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:35:34.321Z,1516739734.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:34.734Z,1516739734.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:35.137Z,1516739735.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:35.546Z,1516739735.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:35.925Z,1516739735.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:36.332Z,1516739736.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:36.735Z,1516739736.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:37.113Z,1516739737.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:37.515Z,1516739737.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:37.949Z,1516739737.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:38.349Z,1516739738.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:38.745Z,1516739738.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:39.148Z,1516739739.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:39.541Z,1516739739.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:39.921Z,1516739739.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:40.320Z,1516739740.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:40.729Z,1516739740.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:41.128Z,1516739741.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:41.556Z,1516739741.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:41.922Z,1516739741.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:42.325Z,1516739742.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:42.721Z,1516739742.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:43.118Z,1516739743.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:43.548Z,1516739743.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:43.916Z,1516739743.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x12316 got:0x36615 2018-01-23T20:35:43.952Z,1516739743.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:44.326Z,1516739744.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:44.729Z,1516739744.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:45.129Z,1516739745.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:45.514Z,1516739745.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x18529 got:0x6941 2018-01-23T20:35:45.548Z,1516739745.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:45.920Z,1516739745.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:46.318Z,1516739746.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:46.728Z,1516739746.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:47.133Z,1516739747.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:47.529Z,1516739747.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:47.929Z,1516739747.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:48.337Z,1516739748.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:48.337Z,1516739748.337 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 345 2018-01-23T20:35:48.337Z,1516739748.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:35:48.362Z,1516739748.362 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:48.362Z,1516739748.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 345 2018-01-23T20:35:48.362Z,1516739748.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:35:48.375Z,1516739748.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:35:48.375Z,1516739748.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:35:48.712Z,1516739748.712 [PNI_TCM](ERROR): CRC does not match. Expected:0x54491 got:0x6210 2018-01-23T20:35:48.752Z,1516739748.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:35:48.752Z,1516739748.752 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 345 2018-01-23T20:35:48.752Z,1516739748.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:35:48.752Z,1516739748.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 345 2018-01-23T20:35:49.132Z,1516739749.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:35:49.132Z,1516739749.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:35:49.132Z,1516739749.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:35:49.133Z,1516739749.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:35:49.133Z,1516739749.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:35:49.134Z,1516739749.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:35:49.518Z,1516739749.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:35:49.519Z,1516739749.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:49.932Z,1516739749.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:35:49.933Z,1516739749.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:50.334Z,1516739750.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:35:50.335Z,1516739750.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:50.733Z,1516739750.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:35:50.734Z,1516739750.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:51.128Z,1516739751.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:35:51.129Z,1516739751.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:51.526Z,1516739751.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:35:51.528Z,1516739751.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:51.920Z,1516739751.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:35:51.921Z,1516739751.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:52.310Z,1516739752.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:35:52.335Z,1516739752.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:52.734Z,1516739752.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:35:52.735Z,1516739752.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:53.144Z,1516739753.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:35:53.145Z,1516739753.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:53.544Z,1516739753.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:35:53.545Z,1516739753.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:53.918Z,1516739753.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:35:53.935Z,1516739753.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:54.320Z,1516739754.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:35:54.321Z,1516739754.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:54.740Z,1516739754.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:35:54.741Z,1516739754.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:55.125Z,1516739755.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:35:55.126Z,1516739755.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:55.519Z,1516739755.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:35:55.520Z,1516739755.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:55.920Z,1516739755.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:35:55.921Z,1516739755.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:56.348Z,1516739756.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:35:56.349Z,1516739756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:56.741Z,1516739756.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:35:56.742Z,1516739756.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:57.129Z,1516739757.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:35:57.130Z,1516739757.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:57.530Z,1516739757.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:35:57.531Z,1516739757.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:57.937Z,1516739757.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:35:57.938Z,1516739757.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:58.325Z,1516739758.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:35:58.326Z,1516739758.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:58.736Z,1516739758.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:35:58.737Z,1516739758.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:59.133Z,1516739759.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:35:59.134Z,1516739759.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:59.539Z,1516739759.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:35:59.540Z,1516739759.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:35:59.928Z,1516739759.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:35:59.929Z,1516739759.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:00.328Z,1516739760.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:36:00.329Z,1516739760.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:00.742Z,1516739760.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:36:00.743Z,1516739760.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:01.124Z,1516739761.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:36:01.125Z,1516739761.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:01.529Z,1516739761.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:36:01.530Z,1516739761.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:01.944Z,1516739761.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:36:01.945Z,1516739761.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:02.344Z,1516739762.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:36:02.345Z,1516739762.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:02.745Z,1516739762.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:36:02.746Z,1516739762.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:03.124Z,1516739763.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:36:03.126Z,1516739763.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:03.524Z,1516739763.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:36:03.525Z,1516739763.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:03.924Z,1516739763.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:36:03.925Z,1516739763.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:04.327Z,1516739764.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:36:04.328Z,1516739764.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:04.732Z,1516739764.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:36:04.733Z,1516739764.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:07.832Z,1516739767.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T20:36:07.833Z,1516739767.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:07.984Z,1516739767.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:36:07.984Z,1516739767.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:08.321Z,1516739768.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:36:08.323Z,1516739768.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:08.709Z,1516739768.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:09.098Z,1516739769.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:09.499Z,1516739769.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:09.902Z,1516739769.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:10.302Z,1516739770.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:10.702Z,1516739770.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:11.104Z,1516739771.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:11.505Z,1516739771.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:11.901Z,1516739771.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:12.299Z,1516739772.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:12.702Z,1516739772.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:13.106Z,1516739773.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:13.502Z,1516739773.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:13.901Z,1516739773.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:14.301Z,1516739774.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:14.701Z,1516739774.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:15.109Z,1516739775.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:15.503Z,1516739775.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:15.912Z,1516739775.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:16.313Z,1516739776.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:16.708Z,1516739776.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:17.096Z,1516739777.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:17.509Z,1516739777.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:17.909Z,1516739777.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:18.315Z,1516739778.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:18.716Z,1516739778.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:19.116Z,1516739779.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:19.517Z,1516739779.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:19.906Z,1516739779.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:20.309Z,1516739780.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:20.715Z,1516739780.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:21.115Z,1516739781.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:21.519Z,1516739781.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:21.916Z,1516739781.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:22.289Z,1516739782.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:22.717Z,1516739782.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:23.135Z,1516739783.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:23.517Z,1516739783.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:23.917Z,1516739783.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:24.317Z,1516739784.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:24.706Z,1516739784.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:25.130Z,1516739785.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:25.506Z,1516739785.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:25.899Z,1516739785.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:26.299Z,1516739786.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:26.703Z,1516739786.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:27.106Z,1516739787.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:27.514Z,1516739787.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:27.901Z,1516739787.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:28.299Z,1516739788.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:28.709Z,1516739788.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:29.106Z,1516739789.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:29.509Z,1516739789.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:29.901Z,1516739789.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:30.300Z,1516739790.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:30.709Z,1516739790.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:31.106Z,1516739791.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:31.506Z,1516739791.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:31.908Z,1516739791.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:32.302Z,1516739792.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:32.710Z,1516739792.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:33.113Z,1516739793.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:33.510Z,1516739793.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:33.905Z,1516739793.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:34.301Z,1516739794.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:34.717Z,1516739794.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:35.114Z,1516739795.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:35.509Z,1516739795.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:35.909Z,1516739795.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:36.305Z,1516739796.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:36.710Z,1516739796.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:37.114Z,1516739797.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:37.515Z,1516739797.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:37.903Z,1516739797.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:38.314Z,1516739798.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:38.715Z,1516739798.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:39.113Z,1516739799.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:39.510Z,1516739799.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:39.901Z,1516739799.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:40.309Z,1516739800.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:40.710Z,1516739800.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:41.117Z,1516739801.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:41.509Z,1516739801.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:41.902Z,1516739801.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:42.300Z,1516739802.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:42.709Z,1516739802.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:43.117Z,1516739803.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:43.510Z,1516739803.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:43.904Z,1516739803.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:44.308Z,1516739804.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:44.714Z,1516739804.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:45.117Z,1516739805.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:45.517Z,1516739805.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:45.900Z,1516739805.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:46.300Z,1516739806.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:46.709Z,1516739806.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:47.121Z,1516739807.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:47.517Z,1516739807.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:47.901Z,1516739807.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:48.304Z,1516739808.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:48.718Z,1516739808.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:49.127Z,1516739809.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:49.520Z,1516739809.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:49.926Z,1516739809.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:50.321Z,1516739810.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:50.787Z,1516739810.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:51.133Z,1516739811.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:51.543Z,1516739811.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:51.904Z,1516739811.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:52.336Z,1516739812.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:52.718Z,1516739812.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:53.139Z,1516739813.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:53.526Z,1516739813.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:53.960Z,1516739813.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:54.369Z,1516739814.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:54.727Z,1516739814.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:55.134Z,1516739815.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:55.559Z,1516739815.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:55.934Z,1516739815.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:56.325Z,1516739816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:56.767Z,1516739816.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:57.136Z,1516739817.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:57.530Z,1516739817.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:57.941Z,1516739817.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:58.333Z,1516739818.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:58.736Z,1516739818.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:59.141Z,1516739819.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:59.533Z,1516739819.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:36:59.918Z,1516739819.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:00.345Z,1516739820.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:00.715Z,1516739820.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:01.129Z,1516739821.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:01.565Z,1516739821.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:01.920Z,1516739821.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:02.334Z,1516739822.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:02.726Z,1516739822.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:03.122Z,1516739823.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:03.536Z,1516739823.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:03.941Z,1516739823.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:04.336Z,1516739824.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:04.712Z,1516739824.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:05.120Z,1516739825.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:10.588Z,1516739830.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:10.711Z,1516739830.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:11.092Z,1516739831.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:11.498Z,1516739831.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:11.893Z,1516739831.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:12.282Z,1516739832.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:12.689Z,1516739832.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:13.085Z,1516739833.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:13.491Z,1516739833.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:13.889Z,1516739833.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:14.293Z,1516739834.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:14.696Z,1516739834.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:15.079Z,1516739835.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:15.484Z,1516739835.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:15.885Z,1516739835.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:16.280Z,1516739836.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:16.685Z,1516739836.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:17.090Z,1516739837.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:17.496Z,1516739837.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:17.897Z,1516739837.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:18.288Z,1516739838.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:18.683Z,1516739838.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:19.090Z,1516739839.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:19.479Z,1516739839.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:19.889Z,1516739839.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:20.297Z,1516739840.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:20.700Z,1516739840.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:21.089Z,1516739841.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:21.483Z,1516739841.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:21.884Z,1516739841.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:22.281Z,1516739842.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:22.689Z,1516739842.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:23.091Z,1516739843.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:23.497Z,1516739843.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:23.897Z,1516739843.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:24.288Z,1516739844.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:24.681Z,1516739844.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:25.082Z,1516739845.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:25.481Z,1516739845.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:25.893Z,1516739845.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:26.294Z,1516739846.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:26.690Z,1516739846.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:27.085Z,1516739847.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:27.482Z,1516739847.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:27.881Z,1516739847.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:28.286Z,1516739848.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:28.692Z,1516739848.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:29.096Z,1516739849.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:29.501Z,1516739849.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:29.891Z,1516739849.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:30.296Z,1516739850.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:30.693Z,1516739850.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:31.096Z,1516739851.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:31.498Z,1516739851.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:31.895Z,1516739851.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:32.303Z,1516739852.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:32.696Z,1516739852.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:33.077Z,1516739853.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:33.492Z,1516739853.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:33.895Z,1516739853.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:34.284Z,1516739854.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:34.697Z,1516739854.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:35.100Z,1516739855.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:35.497Z,1516739855.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:35.898Z,1516739855.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:36.279Z,1516739856.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:36.685Z,1516739856.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:37.081Z,1516739857.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:37.479Z,1516739857.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:37.890Z,1516739857.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:38.286Z,1516739858.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:38.689Z,1516739858.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:39.081Z,1516739859.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:39.480Z,1516739859.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:39.882Z,1516739859.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:40.277Z,1516739860.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:40.684Z,1516739860.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:41.111Z,1516739861.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:41.510Z,1516739861.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:41.894Z,1516739861.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:42.283Z,1516739862.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:42.679Z,1516739862.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:43.088Z,1516739863.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:43.480Z,1516739863.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:43.893Z,1516739863.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:44.290Z,1516739864.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:44.690Z,1516739864.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:45.087Z,1516739865.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:45.481Z,1516739865.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:45.889Z,1516739865.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:46.286Z,1516739866.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:46.681Z,1516739866.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:47.090Z,1516739867.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:47.497Z,1516739867.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:47.897Z,1516739867.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:48.280Z,1516739868.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:48.684Z,1516739868.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:49.082Z,1516739869.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:49.484Z,1516739869.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:49.894Z,1516739869.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:50.294Z,1516739870.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:50.690Z,1516739870.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:51.081Z,1516739871.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:51.481Z,1516739871.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:51.882Z,1516739871.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:52.286Z,1516739872.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:52.692Z,1516739872.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:53.094Z,1516739873.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:53.501Z,1516739873.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:53.897Z,1516739873.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:54.284Z,1516739874.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:54.681Z,1516739874.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:55.081Z,1516739875.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:55.491Z,1516739875.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:55.896Z,1516739875.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:56.297Z,1516739876.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:56.690Z,1516739876.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:57.081Z,1516739877.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:57.489Z,1516739877.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:57.883Z,1516739877.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:58.281Z,1516739878.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:58.692Z,1516739878.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:59.090Z,1516739879.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:59.493Z,1516739879.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:37:59.889Z,1516739879.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:00.288Z,1516739880.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:00.681Z,1516739880.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:01.081Z,1516739881.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:01.481Z,1516739881.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:01.889Z,1516739881.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:02.293Z,1516739882.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:02.690Z,1516739882.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:03.081Z,1516739883.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:03.489Z,1516739883.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:03.888Z,1516739883.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:03.891Z,1516739883.891 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:38:03.892Z,1516739883.892 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:38:03.892Z,1516739883.892 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:38:03.892Z,1516739883.892 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:38:04.285Z,1516739884.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:04.289Z,1516739884.289 [Default:CheckIn:D] Stopped 2018-01-23T20:38:04.289Z,1516739884.289 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:38:04.705Z,1516739884.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:04.708Z,1516739884.708 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1040.203841 min 2018-01-23T20:38:04.708Z,1516739884.708 [Default:CheckIn:E] Stopped 2018-01-23T20:38:04.708Z,1516739884.708 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn] Stopped 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn](INFO): Running loop #102 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn] Running Loop=102 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:38:04.709Z,1516739884.709 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:38:05.085Z,1516739885.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:05.490Z,1516739885.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:08.587Z,1516739888.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:08.724Z,1516739888.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:09.078Z,1516739889.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:09.481Z,1516739889.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:09.887Z,1516739889.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:10.289Z,1516739890.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:10.691Z,1516739890.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:11.081Z,1516739891.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:11.478Z,1516739891.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:11.876Z,1516739891.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:12.281Z,1516739892.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:12.673Z,1516739892.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:13.083Z,1516739893.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:13.489Z,1516739893.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:13.889Z,1516739893.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:14.276Z,1516739894.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:14.681Z,1516739894.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:15.074Z,1516739895.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:15.483Z,1516739895.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:15.885Z,1516739895.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:16.285Z,1516739896.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:16.691Z,1516739896.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:17.076Z,1516739897.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:17.485Z,1516739897.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:17.895Z,1516739897.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:18.289Z,1516739898.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:18.686Z,1516739898.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:19.072Z,1516739899.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:19.493Z,1516739899.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:19.898Z,1516739899.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:20.281Z,1516739900.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:20.674Z,1516739900.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:21.070Z,1516739901.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:21.481Z,1516739901.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:21.874Z,1516739901.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:22.278Z,1516739902.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:22.674Z,1516739902.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:23.073Z,1516739903.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:23.473Z,1516739903.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:23.875Z,1516739903.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:24.278Z,1516739904.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:24.686Z,1516739904.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:25.074Z,1516739905.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:25.471Z,1516739905.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:25.890Z,1516739905.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:26.283Z,1516739906.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:26.681Z,1516739906.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:27.074Z,1516739907.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:27.494Z,1516739907.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:27.893Z,1516739907.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:28.287Z,1516739908.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:28.692Z,1516739908.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:29.081Z,1516739909.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:29.480Z,1516739909.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:29.893Z,1516739909.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:30.293Z,1516739910.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:30.683Z,1516739910.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:31.082Z,1516739911.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:31.473Z,1516739911.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:31.886Z,1516739911.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:32.292Z,1516739912.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:32.686Z,1516739912.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:33.081Z,1516739913.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:33.481Z,1516739913.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:33.884Z,1516739913.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:34.288Z,1516739914.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:34.290Z,1516739914.290 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:34.290Z,1516739914.290 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 346 2018-01-23T20:38:34.290Z,1516739914.290 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:38:34.302Z,1516739914.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:38:34.693Z,1516739914.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:34.705Z,1516739914.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:38:34.705Z,1516739914.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 346 2018-01-23T20:38:35.080Z,1516739915.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:35.081Z,1516739915.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:38:35.082Z,1516739915.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:38:35.082Z,1516739915.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:38:35.483Z,1516739915.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:35.894Z,1516739915.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:36.285Z,1516739916.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:36.692Z,1516739916.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:37.065Z,1516739917.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:37.461Z,1516739917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:37.892Z,1516739917.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:38.288Z,1516739918.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:38.690Z,1516739918.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:39.089Z,1516739919.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:39.491Z,1516739919.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:39.890Z,1516739919.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:40.292Z,1516739920.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:40.696Z,1516739920.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:41.088Z,1516739921.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:41.489Z,1516739921.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:41.893Z,1516739921.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:42.287Z,1516739922.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:42.692Z,1516739922.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:43.069Z,1516739923.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:43.465Z,1516739923.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:43.901Z,1516739923.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:44.295Z,1516739924.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:44.697Z,1516739924.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:45.092Z,1516739925.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:45.472Z,1516739925.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:45.898Z,1516739925.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:46.302Z,1516739926.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:46.678Z,1516739926.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:47.072Z,1516739927.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:47.473Z,1516739927.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:47.875Z,1516739927.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:48.275Z,1516739928.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:48.675Z,1516739928.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:49.071Z,1516739929.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:49.472Z,1516739929.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:49.473Z,1516739929.473 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 346 2018-01-23T20:38:49.473Z,1516739929.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:38:49.474Z,1516739929.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:49.474Z,1516739929.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 346 2018-01-23T20:38:49.475Z,1516739929.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:38:49.504Z,1516739929.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:38:49.504Z,1516739929.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:38:49.904Z,1516739929.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:38:49.904Z,1516739929.904 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 346 2018-01-23T20:38:49.905Z,1516739929.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:38:49.905Z,1516739929.905 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 346 2018-01-23T20:38:50.277Z,1516739930.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:38:50.278Z,1516739930.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:38:50.278Z,1516739930.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:38:50.278Z,1516739930.278 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:38:50.279Z,1516739930.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:38:50.279Z,1516739930.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:38:50.681Z,1516739930.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:38:50.682Z,1516739930.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:51.081Z,1516739931.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:38:51.082Z,1516739931.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:51.472Z,1516739931.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:38:51.473Z,1516739931.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:51.870Z,1516739931.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:38:51.872Z,1516739931.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:52.278Z,1516739932.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:38:52.279Z,1516739932.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:52.671Z,1516739932.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:38:52.672Z,1516739932.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:53.080Z,1516739933.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:38:53.081Z,1516739933.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:53.484Z,1516739933.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:38:53.485Z,1516739933.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:53.888Z,1516739933.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:38:53.889Z,1516739933.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:54.270Z,1516739934.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:38:54.271Z,1516739934.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:54.672Z,1516739934.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:38:54.673Z,1516739934.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:55.083Z,1516739935.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:38:55.084Z,1516739935.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:55.471Z,1516739935.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:38:55.472Z,1516739935.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:55.877Z,1516739935.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:38:55.878Z,1516739935.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:56.282Z,1516739936.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:38:56.283Z,1516739936.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:56.688Z,1516739936.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:38:56.689Z,1516739936.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:57.088Z,1516739937.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:38:57.089Z,1516739937.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:57.475Z,1516739937.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:38:57.476Z,1516739937.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:57.870Z,1516739937.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:38:57.871Z,1516739937.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:58.282Z,1516739938.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:38:58.283Z,1516739938.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:58.671Z,1516739938.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:38:58.672Z,1516739938.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:59.081Z,1516739939.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:38:59.082Z,1516739939.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:59.488Z,1516739939.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:38:59.489Z,1516739939.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:38:59.882Z,1516739939.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:38:59.883Z,1516739939.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:00.269Z,1516739940.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:39:00.270Z,1516739940.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:00.676Z,1516739940.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:39:00.677Z,1516739940.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:01.082Z,1516739941.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:39:01.083Z,1516739941.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:01.477Z,1516739941.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:39:01.478Z,1516739941.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:01.875Z,1516739941.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:39:01.876Z,1516739941.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:02.289Z,1516739942.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:39:02.290Z,1516739942.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:02.693Z,1516739942.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:39:02.694Z,1516739942.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:03.089Z,1516739943.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:39:03.090Z,1516739943.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:03.481Z,1516739943.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:39:03.482Z,1516739943.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:03.880Z,1516739943.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:39:03.881Z,1516739943.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:04.274Z,1516739944.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:39:04.275Z,1516739944.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:04.684Z,1516739944.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:39:04.685Z,1516739944.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:05.094Z,1516739945.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:39:05.095Z,1516739945.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:05.496Z,1516739945.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:39:05.497Z,1516739945.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:05.888Z,1516739945.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:39:05.889Z,1516739945.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:08.972Z,1516739948.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T20:39:08.973Z,1516739948.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:09.087Z,1516739949.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:39:09.088Z,1516739949.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:09.450Z,1516739949.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:39:09.451Z,1516739949.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:09.881Z,1516739949.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:10.253Z,1516739950.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:10.671Z,1516739950.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:11.047Z,1516739951.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:11.451Z,1516739951.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:11.876Z,1516739951.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:12.245Z,1516739952.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x50402 got:0x49152 2018-01-23T20:39:12.279Z,1516739952.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:12.650Z,1516739952.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:13.053Z,1516739953.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:13.447Z,1516739953.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:13.845Z,1516739953.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:14.253Z,1516739954.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:14.642Z,1516739954.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:15.057Z,1516739955.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:15.461Z,1516739955.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:15.855Z,1516739955.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:16.242Z,1516739956.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:16.653Z,1516739956.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:17.047Z,1516739957.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:17.445Z,1516739957.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:17.843Z,1516739957.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:18.254Z,1516739958.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:18.655Z,1516739958.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:19.061Z,1516739959.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:19.446Z,1516739959.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:19.861Z,1516739959.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:20.248Z,1516739960.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:20.653Z,1516739960.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:21.053Z,1516739961.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:21.480Z,1516739961.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:21.846Z,1516739961.846 [PNI_TCM](ERROR): CRC does not match. Expected:0x9691 got:0x86 2018-01-23T20:39:21.865Z,1516739961.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:22.258Z,1516739962.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:22.647Z,1516739962.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:23.057Z,1516739963.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:23.446Z,1516739963.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:23.852Z,1516739963.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:24.261Z,1516739964.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:24.692Z,1516739964.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:25.057Z,1516739965.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:25.453Z,1516739965.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:25.857Z,1516739965.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:26.245Z,1516739966.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:26.656Z,1516739966.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:27.061Z,1516739967.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:27.461Z,1516739967.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:27.865Z,1516739967.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:28.229Z,1516739968.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:28.667Z,1516739968.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:29.060Z,1516739969.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:29.430Z,1516739969.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:29.837Z,1516739969.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:30.266Z,1516739970.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:30.665Z,1516739970.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:31.069Z,1516739971.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:31.443Z,1516739971.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:31.864Z,1516739971.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:32.240Z,1516739972.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:32.638Z,1516739972.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:33.060Z,1516739973.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:33.450Z,1516739973.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:33.848Z,1516739973.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:34.270Z,1516739974.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:34.638Z,1516739974.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:35.041Z,1516739975.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:35.446Z,1516739975.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:35.839Z,1516739975.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:36.246Z,1516739976.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:36.649Z,1516739976.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:37.049Z,1516739977.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:37.444Z,1516739977.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:37.840Z,1516739977.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:38.245Z,1516739978.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:38.644Z,1516739978.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:39.046Z,1516739979.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:39.446Z,1516739979.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:39.845Z,1516739979.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:40.242Z,1516739980.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:40.641Z,1516739980.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:41.040Z,1516739981.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:41.443Z,1516739981.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:41.840Z,1516739981.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:42.246Z,1516739982.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:42.673Z,1516739982.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:43.049Z,1516739983.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:43.440Z,1516739983.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:43.839Z,1516739983.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:44.241Z,1516739984.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:44.640Z,1516739984.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:45.051Z,1516739985.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:45.450Z,1516739985.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:45.849Z,1516739985.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:46.240Z,1516739986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:46.640Z,1516739986.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:47.040Z,1516739987.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:47.441Z,1516739987.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:47.840Z,1516739987.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:48.280Z,1516739988.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:48.649Z,1516739988.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:49.049Z,1516739989.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:49.440Z,1516739989.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:49.839Z,1516739989.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:50.241Z,1516739990.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:50.661Z,1516739990.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:51.050Z,1516739991.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:51.454Z,1516739991.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:51.859Z,1516739991.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:52.247Z,1516739992.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:52.647Z,1516739992.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:53.053Z,1516739993.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:53.442Z,1516739993.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:53.851Z,1516739993.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:54.257Z,1516739994.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:54.654Z,1516739994.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:55.060Z,1516739995.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:55.447Z,1516739995.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:55.853Z,1516739995.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:56.236Z,1516739996.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:56.639Z,1516739996.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:57.042Z,1516739997.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:57.466Z,1516739997.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:57.876Z,1516739997.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:58.236Z,1516739998.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:58.644Z,1516739998.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:59.040Z,1516739999.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:59.440Z,1516739999.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:39:59.845Z,1516739999.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:00.242Z,1516740000.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:00.669Z,1516740000.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:01.054Z,1516740001.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:01.445Z,1516740001.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:01.847Z,1516740001.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:02.248Z,1516740002.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:02.641Z,1516740002.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:03.051Z,1516740003.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:03.477Z,1516740003.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:03.853Z,1516740003.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:04.245Z,1516740004.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:04.641Z,1516740004.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:05.060Z,1516740005.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:05.457Z,1516740005.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:05.850Z,1516740005.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:06.249Z,1516740006.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:09.335Z,1516740009.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:09.484Z,1516740009.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:09.806Z,1516740009.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:10.236Z,1516740010.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:10.603Z,1516740010.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:11.008Z,1516740011.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:11.401Z,1516740011.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:11.805Z,1516740011.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:12.206Z,1516740012.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:12.606Z,1516740012.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:13.007Z,1516740013.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:13.400Z,1516740013.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:13.804Z,1516740013.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:14.201Z,1516740014.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:14.602Z,1516740014.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:15.003Z,1516740015.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:15.406Z,1516740015.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:15.806Z,1516740015.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:16.212Z,1516740016.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:16.605Z,1516740016.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:17.009Z,1516740017.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:17.409Z,1516740017.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:17.805Z,1516740017.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:18.210Z,1516740018.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:18.610Z,1516740018.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:19.011Z,1516740019.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:19.400Z,1516740019.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:19.800Z,1516740019.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:20.199Z,1516740020.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:20.602Z,1516740020.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:21.008Z,1516740021.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:21.409Z,1516740021.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:21.813Z,1516740021.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:22.216Z,1516740022.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:22.605Z,1516740022.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:23.002Z,1516740023.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:23.401Z,1516740023.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:23.805Z,1516740023.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:24.209Z,1516740024.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:24.615Z,1516740024.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:25.010Z,1516740025.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:25.408Z,1516740025.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:25.812Z,1516740025.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:26.208Z,1516740026.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:26.608Z,1516740026.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:27.012Z,1516740027.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:27.415Z,1516740027.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:27.814Z,1516740027.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:28.210Z,1516740028.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:28.601Z,1516740028.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:29.012Z,1516740029.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:29.414Z,1516740029.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:29.807Z,1516740029.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:30.213Z,1516740030.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:30.621Z,1516740030.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:31.012Z,1516740031.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:31.417Z,1516740031.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:31.791Z,1516740031.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:32.194Z,1516740032.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:32.608Z,1516740032.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:33.005Z,1516740033.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:33.411Z,1516740033.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:33.814Z,1516740033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:34.216Z,1516740034.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:34.605Z,1516740034.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:35.005Z,1516740035.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:35.403Z,1516740035.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:35.800Z,1516740035.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:36.160Z,1516740036.160 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T20:40:36.160Z,1516740036.160 [NAL9602] Data Fault, FailCount= 5 2018-01-23T20:40:36.160Z,1516740036.160 [NAL9602](ERROR): Data Fault 2018-01-23T20:40:36.209Z,1516740036.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:36.242Z,1516740036.242 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T20:40:36.242Z,1516740036.242 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-01-23T20:40:36.560Z,1516740036.560 [NAL9602](INFO): Powering down 2018-01-23T20:40:36.609Z,1516740036.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:36.620Z,1516740036.620 [CBIT](INFO): Critical error at 20180123T204036 2018-01-23T20:40:37.001Z,1516740037.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:37.407Z,1516740037.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:37.803Z,1516740037.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:38.205Z,1516740038.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:38.600Z,1516740038.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:39.007Z,1516740039.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:39.407Z,1516740039.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:39.809Z,1516740039.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:40.204Z,1516740040.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:40.608Z,1516740040.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:41.001Z,1516740041.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:41.404Z,1516740041.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:41.808Z,1516740041.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:42.208Z,1516740042.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:42.604Z,1516740042.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:43.009Z,1516740043.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:43.408Z,1516740043.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:43.804Z,1516740043.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:44.209Z,1516740044.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:44.608Z,1516740044.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:45.008Z,1516740045.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:45.404Z,1516740045.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:45.806Z,1516740045.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:46.206Z,1516740046.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:46.631Z,1516740046.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:47.008Z,1516740047.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:47.411Z,1516740047.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:47.803Z,1516740047.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:48.211Z,1516740048.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:48.611Z,1516740048.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:48.990Z,1516740048.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:49.390Z,1516740049.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:49.795Z,1516740049.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:50.196Z,1516740050.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:50.597Z,1516740050.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:50.999Z,1516740050.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:51.396Z,1516740051.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:51.796Z,1516740051.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:52.199Z,1516740052.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:52.600Z,1516740052.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:53.000Z,1516740053.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:53.400Z,1516740053.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:53.798Z,1516740053.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:54.205Z,1516740054.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:54.601Z,1516740054.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:54.999Z,1516740054.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:55.401Z,1516740055.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:55.799Z,1516740055.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:56.198Z,1516740056.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:56.598Z,1516740056.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:57.003Z,1516740057.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:57.404Z,1516740057.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:57.799Z,1516740057.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:58.209Z,1516740058.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:58.598Z,1516740058.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:59.005Z,1516740059.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:59.405Z,1516740059.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:40:59.798Z,1516740059.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:00.198Z,1516740060.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:00.598Z,1516740060.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:00.998Z,1516740060.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:01.405Z,1516740061.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:01.798Z,1516740061.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:02.198Z,1516740062.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:02.598Z,1516740062.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:03.005Z,1516740063.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:03.398Z,1516740063.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:03.804Z,1516740063.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:04.195Z,1516740064.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:04.598Z,1516740064.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:04.998Z,1516740064.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:05.405Z,1516740065.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:05.798Z,1516740065.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:06.198Z,1516740066.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:06.603Z,1516740066.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:09.692Z,1516740069.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:09.828Z,1516740069.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:10.155Z,1516740070.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:10.561Z,1516740070.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:10.953Z,1516740070.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:11.363Z,1516740071.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:11.757Z,1516740071.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:12.153Z,1516740072.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:12.560Z,1516740072.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:12.957Z,1516740072.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:13.353Z,1516740073.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:13.755Z,1516740073.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:14.158Z,1516740074.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:14.554Z,1516740074.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:14.954Z,1516740074.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:15.365Z,1516740075.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:15.754Z,1516740075.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:16.154Z,1516740076.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:16.557Z,1516740076.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:16.954Z,1516740076.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:17.373Z,1516740077.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:17.760Z,1516740077.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:18.169Z,1516740078.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:18.560Z,1516740078.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:18.963Z,1516740078.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:19.358Z,1516740079.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:19.764Z,1516740079.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:20.171Z,1516740080.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:20.546Z,1516740080.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:20.953Z,1516740080.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:21.352Z,1516740081.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:21.751Z,1516740081.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:22.158Z,1516740082.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:22.553Z,1516740082.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:22.959Z,1516740082.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:23.364Z,1516740083.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:23.754Z,1516740083.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:24.159Z,1516740084.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:24.554Z,1516740084.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:24.964Z,1516740084.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:25.358Z,1516740085.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:25.755Z,1516740085.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:26.160Z,1516740086.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:26.555Z,1516740086.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:26.961Z,1516740086.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:27.354Z,1516740087.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:27.755Z,1516740087.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:28.156Z,1516740088.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:28.555Z,1516740088.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:28.954Z,1516740088.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:29.360Z,1516740089.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:29.756Z,1516740089.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:30.155Z,1516740090.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:30.555Z,1516740090.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:30.951Z,1516740090.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:31.354Z,1516740091.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:31.754Z,1516740091.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:32.151Z,1516740092.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:32.554Z,1516740092.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:32.954Z,1516740092.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:33.351Z,1516740093.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:33.753Z,1516740093.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:34.154Z,1516740094.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:34.553Z,1516740094.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:34.954Z,1516740094.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:35.353Z,1516740095.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:35.356Z,1516740095.356 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:35.356Z,1516740095.356 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 347 2018-01-23T20:41:35.356Z,1516740095.356 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:41:35.367Z,1516740095.367 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:41:35.760Z,1516740095.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:35.772Z,1516740095.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:41:35.772Z,1516740095.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 347 2018-01-23T20:41:36.154Z,1516740096.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:36.155Z,1516740096.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:41:36.156Z,1516740096.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:41:36.156Z,1516740096.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:41:36.558Z,1516740096.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:36.951Z,1516740096.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:37.354Z,1516740097.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:37.760Z,1516740097.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:38.151Z,1516740098.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:38.553Z,1516740098.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:38.959Z,1516740098.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:39.352Z,1516740099.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:39.754Z,1516740099.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:40.154Z,1516740100.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:40.557Z,1516740100.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:40.958Z,1516740100.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:41.360Z,1516740101.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:41.757Z,1516740101.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:42.157Z,1516740102.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:42.554Z,1516740102.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:42.951Z,1516740102.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:43.354Z,1516740103.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:43.754Z,1516740103.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:44.152Z,1516740104.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:44.555Z,1516740104.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:44.954Z,1516740104.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:45.352Z,1516740105.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:45.754Z,1516740105.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:46.154Z,1516740106.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:46.555Z,1516740106.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:46.954Z,1516740106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:47.357Z,1516740107.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:47.758Z,1516740107.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:48.158Z,1516740108.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:48.560Z,1516740108.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:48.952Z,1516740108.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:49.355Z,1516740109.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:49.754Z,1516740109.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:50.152Z,1516740110.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:50.557Z,1516740110.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:50.557Z,1516740110.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 347 2018-01-23T20:41:50.557Z,1516740110.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:41:50.559Z,1516740110.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:50.559Z,1516740110.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 347 2018-01-23T20:41:50.559Z,1516740110.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:41:50.572Z,1516740110.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:41:50.572Z,1516740110.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:41:50.972Z,1516740110.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:41:50.972Z,1516740110.972 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 347 2018-01-23T20:41:50.972Z,1516740110.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:41:50.972Z,1516740110.972 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 347 2018-01-23T20:41:51.351Z,1516740111.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:41:51.351Z,1516740111.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:41:51.352Z,1516740111.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:41:51.352Z,1516740111.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:41:51.352Z,1516740111.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:41:51.353Z,1516740111.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:41:51.757Z,1516740111.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:41:51.758Z,1516740111.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:52.160Z,1516740112.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:41:52.161Z,1516740112.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:52.554Z,1516740112.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:41:52.555Z,1516740112.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:52.963Z,1516740112.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:41:52.964Z,1516740112.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:53.358Z,1516740113.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:41:53.360Z,1516740113.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:53.759Z,1516740113.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:41:53.760Z,1516740113.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:54.160Z,1516740114.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:41:54.161Z,1516740114.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:54.566Z,1516740114.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:41:54.567Z,1516740114.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:54.956Z,1516740114.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:41:54.957Z,1516740114.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:55.358Z,1516740115.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:41:55.359Z,1516740115.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:55.762Z,1516740115.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:41:55.767Z,1516740115.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:56.163Z,1516740116.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:41:56.164Z,1516740116.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:56.557Z,1516740116.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:41:56.558Z,1516740116.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:56.969Z,1516740116.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:41:56.970Z,1516740116.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:57.364Z,1516740117.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:41:57.365Z,1516740117.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:57.759Z,1516740117.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:41:57.760Z,1516740117.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:58.163Z,1516740118.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:41:58.164Z,1516740118.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:58.557Z,1516740118.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:41:58.558Z,1516740118.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:58.962Z,1516740118.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:41:58.963Z,1516740118.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:59.363Z,1516740119.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:41:59.364Z,1516740119.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:41:59.757Z,1516740119.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:41:59.758Z,1516740119.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:00.163Z,1516740120.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:42:00.164Z,1516740120.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:00.562Z,1516740120.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:42:00.563Z,1516740120.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:00.946Z,1516740120.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:42:00.971Z,1516740120.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:01.346Z,1516740121.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:42:01.348Z,1516740121.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:01.746Z,1516740121.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:42:01.748Z,1516740121.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:02.152Z,1516740122.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:42:02.153Z,1516740122.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:02.559Z,1516740122.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:42:02.560Z,1516740122.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:02.953Z,1516740122.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:42:02.954Z,1516740122.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:03.363Z,1516740123.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:42:03.364Z,1516740123.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:03.756Z,1516740123.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:42:03.757Z,1516740123.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:04.153Z,1516740124.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:42:04.154Z,1516740124.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:04.564Z,1516740124.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:42:04.565Z,1516740124.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:04.956Z,1516740124.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:42:04.957Z,1516740124.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:05.353Z,1516740125.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:42:05.354Z,1516740125.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:05.754Z,1516740125.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:42:05.755Z,1516740125.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:06.153Z,1516740126.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:42:06.154Z,1516740126.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:06.559Z,1516740126.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:42:06.560Z,1516740126.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:06.956Z,1516740126.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:42:06.957Z,1516740126.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:10.051Z,1516740130.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T20:42:10.052Z,1516740130.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:10.161Z,1516740130.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:42:10.162Z,1516740130.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:10.524Z,1516740130.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:42:10.525Z,1516740130.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:10.923Z,1516740130.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:11.322Z,1516740131.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:11.729Z,1516740131.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:12.137Z,1516740132.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:12.526Z,1516740132.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:12.936Z,1516740132.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:13.310Z,1516740133.310 [PNI_TCM](ERROR): CRC does not match. Expected:0x38200 got:0x7618 2018-01-23T20:42:13.329Z,1516740133.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:13.720Z,1516740133.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:14.124Z,1516740134.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:14.525Z,1516740134.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:14.925Z,1516740134.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:15.324Z,1516740135.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:15.723Z,1516740135.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:16.141Z,1516740136.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:16.518Z,1516740136.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x59795 got:0x7233 2018-01-23T20:42:16.537Z,1516740136.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:16.921Z,1516740136.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:17.320Z,1516740137.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:17.736Z,1516740137.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:18.129Z,1516740138.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:18.522Z,1516740138.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:18.925Z,1516740138.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:19.320Z,1516740139.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:19.722Z,1516740139.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:20.122Z,1516740140.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:20.521Z,1516740140.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:20.937Z,1516740140.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:21.326Z,1516740141.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:21.723Z,1516740141.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:22.122Z,1516740142.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:22.536Z,1516740142.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:22.923Z,1516740142.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:23.322Z,1516740143.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:23.721Z,1516740143.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:24.118Z,1516740144.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:24.524Z,1516740144.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:24.923Z,1516740144.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:25.322Z,1516740145.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:25.740Z,1516740145.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:26.126Z,1516740146.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:26.526Z,1516740146.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:26.927Z,1516740146.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:27.325Z,1516740147.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:27.719Z,1516740147.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:28.132Z,1516740148.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:28.522Z,1516740148.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:28.929Z,1516740148.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:29.331Z,1516740149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:29.726Z,1516740149.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:30.129Z,1516740150.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:30.521Z,1516740150.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:30.921Z,1516740150.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:31.329Z,1516740151.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:31.727Z,1516740151.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:32.133Z,1516740152.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:32.523Z,1516740152.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:32.928Z,1516740152.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:33.328Z,1516740153.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:33.721Z,1516740153.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:34.127Z,1516740154.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:34.532Z,1516740154.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:34.932Z,1516740154.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:35.326Z,1516740155.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:35.720Z,1516740155.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:36.134Z,1516740156.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:36.526Z,1516740156.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:36.551Z,1516740156.551 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T20:42:36.551Z,1516740156.551 [NAL9602] No Fault, FailCount= 5 2018-01-23T20:42:36.880Z,1516740156.880 [NAL9602](INFO): Powering up NAL9602 2018-01-23T20:42:36.933Z,1516740156.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:37.335Z,1516740157.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:37.737Z,1516740157.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:38.138Z,1516740158.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:38.519Z,1516740158.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:38.916Z,1516740158.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:39.320Z,1516740159.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:39.721Z,1516740159.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:40.122Z,1516740160.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:40.525Z,1516740160.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:40.920Z,1516740160.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:41.336Z,1516740161.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:41.725Z,1516740161.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:42.124Z,1516740162.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:42.527Z,1516740162.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:42.920Z,1516740162.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:43.321Z,1516740163.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:43.721Z,1516740163.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:44.122Z,1516740164.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:44.526Z,1516740164.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:44.925Z,1516740164.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:45.322Z,1516740165.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:45.725Z,1516740165.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:46.121Z,1516740166.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:46.532Z,1516740166.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:46.932Z,1516740166.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:47.325Z,1516740167.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:47.739Z,1516740167.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:48.080Z,1516740168.080 [NAL9602](INFO): NAL9602 initialized 2018-01-23T20:42:48.127Z,1516740168.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:48.527Z,1516740168.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:48.943Z,1516740168.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:49.337Z,1516740169.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:49.730Z,1516740169.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:50.128Z,1516740170.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:50.523Z,1516740170.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:50.927Z,1516740170.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:51.322Z,1516740171.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:51.734Z,1516740171.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:52.133Z,1516740172.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:52.544Z,1516740172.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:52.923Z,1516740172.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:53.327Z,1516740173.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:53.722Z,1516740173.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:54.129Z,1516740174.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:54.527Z,1516740174.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:54.941Z,1516740174.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:55.334Z,1516740175.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:55.730Z,1516740175.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:56.122Z,1516740176.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:56.533Z,1516740176.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:56.925Z,1516740176.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:57.332Z,1516740177.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:57.737Z,1516740177.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:58.134Z,1516740178.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:58.540Z,1516740178.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:58.927Z,1516740178.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:59.327Z,1516740179.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:42:59.733Z,1516740179.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:00.124Z,1516740180.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:00.511Z,1516740180.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:00.941Z,1516740180.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:01.353Z,1516740181.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:01.740Z,1516740181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:02.140Z,1516740182.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:02.521Z,1516740182.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:02.921Z,1516740182.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:03.329Z,1516740183.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:03.737Z,1516740183.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:04.135Z,1516740184.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:04.537Z,1516740184.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:04.926Z,1516740184.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:04.929Z,1516740184.929 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:38:04.7Z 2018-01-23T20:43:04.929Z,1516740184.929 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:43:04.929Z,1516740184.929 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:43:05.320Z,1516740185.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:05.869Z,1516740185.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:06.127Z,1516740186.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:09.237Z,1516740189.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:09.327Z,1516740189.327 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180123T031358/Courier0408.lzma 2018-01-23T20:43:09.405Z,1516740189.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:09.731Z,1516740189.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:10.069Z,1516740190.069 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0408.lzma.bak 2018-01-23T20:43:10.069Z,1516740190.069 [DataOverHttps](INFO): SBD MOMSN=7756618 2018-01-23T20:43:10.144Z,1516740190.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:10.875Z,1516740190.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:11.001Z,1516740191.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:14.081Z,1516740194.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:14.213Z,1516740194.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:14.590Z,1516740194.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:14.965Z,1516740194.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:15.362Z,1516740195.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:15.763Z,1516740195.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:18.856Z,1516740198.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:18.943Z,1516740198.943 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180123T031358/Express0409.lzma 2018-01-23T20:43:19.013Z,1516740199.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:19.351Z,1516740199.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:19.698Z,1516740199.698 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0409.lzma.bak 2018-01-23T20:43:19.698Z,1516740199.698 [DataOverHttps](INFO): SBD MOMSN=7756621 2018-01-23T20:43:19.766Z,1516740199.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:20.410Z,1516740200.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:20.413Z,1516740200.413 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:43:20.413Z,1516740200.413 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:43:20.413Z,1516740200.413 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:43:20.560Z,1516740200.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:23.659Z,1516740203.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:23.797Z,1516740203.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:24.151Z,1516740204.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:24.553Z,1516740204.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:24.951Z,1516740204.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:25.325Z,1516740205.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:25.725Z,1516740205.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:26.123Z,1516740206.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:26.524Z,1516740206.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:26.927Z,1516740206.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:27.326Z,1516740207.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:27.726Z,1516740207.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:28.128Z,1516740208.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:28.522Z,1516740208.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:28.922Z,1516740208.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:29.322Z,1516740209.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:29.726Z,1516740209.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:30.130Z,1516740210.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:30.532Z,1516740210.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:30.920Z,1516740210.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:31.323Z,1516740211.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:31.724Z,1516740211.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:32.124Z,1516740212.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:32.522Z,1516740212.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:32.929Z,1516740212.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:33.333Z,1516740213.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:33.730Z,1516740213.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:34.124Z,1516740214.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:34.523Z,1516740214.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:34.925Z,1516740214.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:35.324Z,1516740215.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:35.729Z,1516740215.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:36.134Z,1516740216.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:36.530Z,1516740216.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:36.922Z,1516740216.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:37.323Z,1516740217.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:37.723Z,1516740217.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:38.125Z,1516740218.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:38.523Z,1516740218.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:38.930Z,1516740218.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:39.329Z,1516740219.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:39.758Z,1516740219.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:40.128Z,1516740220.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:40.524Z,1516740220.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:40.925Z,1516740220.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:41.324Z,1516740221.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:41.733Z,1516740221.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:42.134Z,1516740222.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:42.529Z,1516740222.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:42.922Z,1516740222.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:43.329Z,1516740223.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:43.724Z,1516740223.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:44.125Z,1516740224.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:44.523Z,1516740224.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:44.937Z,1516740224.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:45.329Z,1516740225.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:45.733Z,1516740225.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:46.128Z,1516740226.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:46.614Z,1516740226.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:46.933Z,1516740226.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:47.328Z,1516740227.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:47.733Z,1516740227.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:48.142Z,1516740228.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:48.533Z,1516740228.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:48.924Z,1516740228.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:49.385Z,1516740229.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:49.729Z,1516740229.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:50.129Z,1516740230.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:50.525Z,1516740230.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:50.941Z,1516740230.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:51.334Z,1516740231.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:51.734Z,1516740231.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:52.125Z,1516740232.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:52.525Z,1516740232.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:52.925Z,1516740232.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:53.336Z,1516740233.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:53.733Z,1516740233.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:54.142Z,1516740234.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:54.538Z,1516740234.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:54.929Z,1516740234.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:55.329Z,1516740235.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:55.727Z,1516740235.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:56.125Z,1516740236.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:56.532Z,1516740236.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:56.939Z,1516740236.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:57.333Z,1516740237.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:57.734Z,1516740237.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:58.127Z,1516740238.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:58.537Z,1516740238.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:58.937Z,1516740238.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:59.333Z,1516740239.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:43:59.739Z,1516740239.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:00.139Z,1516740240.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:00.541Z,1516740240.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:00.930Z,1516740240.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:01.328Z,1516740241.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:01.715Z,1516740241.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:02.117Z,1516740242.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:02.544Z,1516740242.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:02.955Z,1516740242.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:03.347Z,1516740243.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:03.752Z,1516740243.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:04.123Z,1516740244.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:04.528Z,1516740244.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:04.922Z,1516740244.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:05.329Z,1516740245.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:05.755Z,1516740245.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:06.130Z,1516740246.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:06.532Z,1516740246.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:06.920Z,1516740246.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:07.323Z,1516740247.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:07.728Z,1516740247.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:08.122Z,1516740248.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:08.523Z,1516740248.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:08.926Z,1516740248.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:09.326Z,1516740249.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:09.726Z,1516740249.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:10.122Z,1516740250.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:10.522Z,1516740250.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:10.929Z,1516740250.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:11.324Z,1516740251.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:11.726Z,1516740251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:12.130Z,1516740252.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:12.532Z,1516740252.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:12.925Z,1516740252.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:13.323Z,1516740253.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:13.726Z,1516740253.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:14.126Z,1516740254.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:14.526Z,1516740254.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:14.924Z,1516740254.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:15.324Z,1516740255.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:15.726Z,1516740255.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:16.129Z,1516740256.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:16.551Z,1516740256.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:16.933Z,1516740256.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:17.324Z,1516740257.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:17.733Z,1516740257.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:18.134Z,1516740258.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:18.536Z,1516740258.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:18.933Z,1516740258.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:19.327Z,1516740259.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:19.730Z,1516740259.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:20.130Z,1516740260.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:20.533Z,1516740260.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:20.929Z,1516740260.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:24.025Z,1516740264.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:24.185Z,1516740264.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:24.526Z,1516740264.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:24.923Z,1516740264.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:25.315Z,1516740265.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:25.716Z,1516740265.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:26.121Z,1516740266.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:26.516Z,1516740266.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:26.923Z,1516740266.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:27.320Z,1516740267.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:27.721Z,1516740267.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:28.121Z,1516740268.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:28.515Z,1516740268.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:28.900Z,1516740268.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:29.305Z,1516740269.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:29.731Z,1516740269.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:30.136Z,1516740270.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:30.541Z,1516740270.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:30.904Z,1516740270.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:31.304Z,1516740271.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:31.732Z,1516740271.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:32.132Z,1516740272.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:32.531Z,1516740272.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:32.913Z,1516740272.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:33.307Z,1516740273.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:33.714Z,1516740273.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:34.114Z,1516740274.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:34.513Z,1516740274.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:34.910Z,1516740274.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:35.307Z,1516740275.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:35.714Z,1516740275.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:36.114Z,1516740276.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:36.521Z,1516740276.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:36.539Z,1516740276.539 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:36.539Z,1516740276.539 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 348 2018-01-23T20:44:36.539Z,1516740276.539 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:44:36.564Z,1516740276.564 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:44:36.917Z,1516740276.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:36.945Z,1516740276.945 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:44:36.945Z,1516740276.945 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 348 2018-01-23T20:44:37.308Z,1516740277.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:37.309Z,1516740277.309 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:44:37.309Z,1516740277.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:44:37.310Z,1516740277.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:44:37.713Z,1516740277.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:38.114Z,1516740278.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:38.514Z,1516740278.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:38.543Z,1516740278.543 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:44:38.908Z,1516740278.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:39.309Z,1516740279.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:39.708Z,1516740279.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:40.113Z,1516740280.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:40.514Z,1516740280.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:40.921Z,1516740280.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:41.307Z,1516740281.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:41.714Z,1516740281.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:42.110Z,1516740282.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:42.506Z,1516740282.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:42.925Z,1516740282.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:43.318Z,1516740283.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:43.767Z,1516740283.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:44.108Z,1516740284.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:44.513Z,1516740284.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:44.918Z,1516740284.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:45.309Z,1516740285.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:45.710Z,1516740285.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:46.121Z,1516740286.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:46.524Z,1516740286.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:46.925Z,1516740286.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:47.311Z,1516740287.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:47.712Z,1516740287.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:48.109Z,1516740288.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:48.512Z,1516740288.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:48.922Z,1516740288.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:49.325Z,1516740289.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:49.720Z,1516740289.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:50.111Z,1516740290.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:50.509Z,1516740290.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:50.913Z,1516740290.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:51.316Z,1516740291.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:51.709Z,1516740291.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:51.709Z,1516740291.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 348 2018-01-23T20:44:51.710Z,1516740291.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:44:51.712Z,1516740291.712 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:51.712Z,1516740291.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 348 2018-01-23T20:44:51.712Z,1516740291.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:44:51.724Z,1516740291.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:44:51.725Z,1516740291.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:44:52.128Z,1516740292.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:44:52.128Z,1516740292.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 348 2018-01-23T20:44:52.128Z,1516740292.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:44:52.128Z,1516740292.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 348 2018-01-23T20:44:52.520Z,1516740292.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:44:52.520Z,1516740292.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:44:52.521Z,1516740292.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:44:52.521Z,1516740292.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:44:52.521Z,1516740292.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:44:52.522Z,1516740292.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:44:52.922Z,1516740292.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:44:52.927Z,1516740292.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:53.309Z,1516740293.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:44:53.310Z,1516740293.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:53.715Z,1516740293.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:44:53.716Z,1516740293.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:54.114Z,1516740294.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:44:54.116Z,1516740294.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:54.516Z,1516740294.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:44:54.517Z,1516740294.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:54.920Z,1516740294.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:44:54.920Z,1516740294.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:55.323Z,1516740295.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:44:55.324Z,1516740295.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:55.718Z,1516740295.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:44:55.719Z,1516740295.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:56.115Z,1516740296.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:44:56.116Z,1516740296.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:56.519Z,1516740296.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:44:56.520Z,1516740296.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:56.924Z,1516740296.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:44:56.925Z,1516740296.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:57.315Z,1516740297.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:44:57.316Z,1516740297.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:57.720Z,1516740297.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:44:57.721Z,1516740297.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:58.122Z,1516740298.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:44:58.123Z,1516740298.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:58.523Z,1516740298.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:44:58.524Z,1516740298.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:58.928Z,1516740298.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:44:58.929Z,1516740298.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:59.298Z,1516740299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:44:59.326Z,1516740299.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:44:59.720Z,1516740299.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:44:59.721Z,1516740299.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:00.115Z,1516740300.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:45:00.116Z,1516740300.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:00.502Z,1516740300.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:45:00.531Z,1516740300.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:00.925Z,1516740300.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:45:00.926Z,1516740300.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:01.332Z,1516740301.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:45:01.333Z,1516740301.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:01.724Z,1516740301.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:45:01.725Z,1516740301.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:02.123Z,1516740302.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:45:02.124Z,1516740302.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:02.500Z,1516740302.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:45:02.501Z,1516740302.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:02.898Z,1516740302.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:45:02.899Z,1516740302.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:03.328Z,1516740303.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:45:03.329Z,1516740303.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:03.708Z,1516740303.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:45:03.709Z,1516740303.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:04.113Z,1516740304.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:45:04.114Z,1516740304.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:04.521Z,1516740304.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:45:04.522Z,1516740304.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:04.913Z,1516740304.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:45:04.914Z,1516740304.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:05.307Z,1516740305.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:45:05.308Z,1516740305.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:05.709Z,1516740305.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:45:05.710Z,1516740305.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:06.115Z,1516740306.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:45:06.116Z,1516740306.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:06.511Z,1516740306.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:45:06.512Z,1516740306.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:06.915Z,1516740306.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:45:06.916Z,1516740306.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:07.314Z,1516740307.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:45:07.315Z,1516740307.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:07.729Z,1516740307.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:45:07.730Z,1516740307.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:08.117Z,1516740308.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:45:08.118Z,1516740308.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:08.516Z,1516740308.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:45:08.517Z,1516740308.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:08.921Z,1516740308.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:45:08.922Z,1516740308.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:09.316Z,1516740309.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:45:09.317Z,1516740309.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:09.719Z,1516740309.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:45:09.720Z,1516740309.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:10.132Z,1516740310.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:45:10.133Z,1516740310.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:10.531Z,1516740310.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:45:10.532Z,1516740310.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:10.928Z,1516740310.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:45:10.929Z,1516740310.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:11.298Z,1516740311.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:45:11.323Z,1516740311.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:11.721Z,1516740311.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:12.100Z,1516740312.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:12.503Z,1516740312.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:12.934Z,1516740312.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:13.338Z,1516740313.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:13.716Z,1516740313.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:14.109Z,1516740314.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:14.505Z,1516740314.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:14.911Z,1516740314.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:15.317Z,1516740315.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:15.707Z,1516740315.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:16.120Z,1516740316.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:16.518Z,1516740316.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:16.914Z,1516740316.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:17.309Z,1516740317.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:17.710Z,1516740317.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:18.110Z,1516740318.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:18.516Z,1516740318.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:18.921Z,1516740318.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:19.314Z,1516740319.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:19.720Z,1516740319.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:20.106Z,1516740320.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:20.517Z,1516740320.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:20.911Z,1516740320.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:21.309Z,1516740321.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:24.417Z,1516740324.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:24.573Z,1516740324.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:24.921Z,1516740324.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:25.317Z,1516740325.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:25.707Z,1516740325.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:26.114Z,1516740326.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:26.504Z,1516740326.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:26.913Z,1516740326.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:27.321Z,1516740327.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:27.714Z,1516740327.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:28.105Z,1516740328.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:28.514Z,1516740328.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:28.904Z,1516740328.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:29.305Z,1516740329.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:29.705Z,1516740329.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:30.117Z,1516740330.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:30.513Z,1516740330.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:30.913Z,1516740330.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:31.312Z,1516740331.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:31.713Z,1516740331.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:32.105Z,1516740332.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:32.508Z,1516740332.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:32.913Z,1516740332.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:33.318Z,1516740333.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:33.715Z,1516740333.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:34.105Z,1516740334.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:34.517Z,1516740334.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:34.913Z,1516740334.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:35.305Z,1516740335.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:35.714Z,1516740335.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:36.115Z,1516740336.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:36.531Z,1516740336.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:36.925Z,1516740336.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:37.317Z,1516740337.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:37.715Z,1516740337.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:38.108Z,1516740338.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:38.522Z,1516740338.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:38.917Z,1516740338.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:39.328Z,1516740339.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:39.726Z,1516740339.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:40.093Z,1516740340.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:40.501Z,1516740340.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:40.904Z,1516740340.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:41.304Z,1516740341.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:41.713Z,1516740341.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:42.135Z,1516740342.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:42.506Z,1516740342.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:42.935Z,1516740342.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:43.300Z,1516740343.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:43.702Z,1516740343.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:44.113Z,1516740344.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:44.509Z,1516740344.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:44.910Z,1516740344.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:45.317Z,1516740345.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:45.715Z,1516740345.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:46.116Z,1516740346.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:46.513Z,1516740346.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:46.917Z,1516740346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:47.306Z,1516740347.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:47.705Z,1516740347.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:48.121Z,1516740348.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:48.518Z,1516740348.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:48.922Z,1516740348.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:49.317Z,1516740349.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:49.713Z,1516740349.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:50.115Z,1516740350.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:50.521Z,1516740350.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:50.925Z,1516740350.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:51.327Z,1516740351.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:51.721Z,1516740351.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:52.121Z,1516740352.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:52.523Z,1516740352.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:52.896Z,1516740352.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:53.300Z,1516740353.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:53.729Z,1516740353.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:54.134Z,1516740354.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:54.518Z,1516740354.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:54.917Z,1516740354.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:55.309Z,1516740355.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:55.713Z,1516740355.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:56.108Z,1516740356.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:56.508Z,1516740356.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:56.914Z,1516740356.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:57.318Z,1516740357.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:57.715Z,1516740357.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:58.103Z,1516740358.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:58.506Z,1516740358.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:58.913Z,1516740358.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:59.310Z,1516740359.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:45:59.717Z,1516740359.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:00.116Z,1516740360.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:00.518Z,1516740360.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:00.919Z,1516740360.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:01.312Z,1516740361.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:01.705Z,1516740361.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:02.107Z,1516740362.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:02.512Z,1516740362.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:02.913Z,1516740362.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:03.325Z,1516740363.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:03.717Z,1516740363.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:04.117Z,1516740364.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:04.517Z,1516740364.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:04.907Z,1516740364.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:05.310Z,1516740365.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:05.714Z,1516740365.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:06.124Z,1516740366.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:06.521Z,1516740366.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:06.918Z,1516740366.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:07.312Z,1516740367.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:07.717Z,1516740367.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:08.105Z,1516740368.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:08.514Z,1516740368.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:08.918Z,1516740368.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:09.329Z,1516740369.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:09.718Z,1516740369.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:10.108Z,1516740370.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:10.516Z,1516740370.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:10.918Z,1516740370.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:11.318Z,1516740371.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:11.721Z,1516740371.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:12.111Z,1516740372.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:12.513Z,1516740372.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:12.918Z,1516740372.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:13.322Z,1516740373.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:13.715Z,1516740373.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:14.120Z,1516740374.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:14.512Z,1516740374.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:14.917Z,1516740374.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:15.319Z,1516740375.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:15.727Z,1516740375.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:16.115Z,1516740376.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:16.532Z,1516740376.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:16.914Z,1516740376.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x35242 got:0x49773 2018-01-23T20:46:16.933Z,1516740376.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:17.320Z,1516740377.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:17.727Z,1516740377.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:18.118Z,1516740378.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:18.494Z,1516740378.494 [PNI_TCM](ERROR): CRC does not match. Expected:0x8792 got:0x7106 2018-01-23T20:46:18.519Z,1516740378.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:18.922Z,1516740378.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:19.323Z,1516740379.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:19.729Z,1516740379.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:20.118Z,1516740380.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:20.530Z,1516740380.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:20.929Z,1516740380.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:21.322Z,1516740381.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:21.729Z,1516740381.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:24.794Z,1516740384.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:24.923Z,1516740384.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:25.297Z,1516740385.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:25.701Z,1516740385.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:26.124Z,1516740386.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:26.491Z,1516740386.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:26.892Z,1516740386.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:27.293Z,1516740387.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:27.697Z,1516740387.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:28.098Z,1516740388.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:28.501Z,1516740388.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:28.905Z,1516740388.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:29.301Z,1516740389.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:29.687Z,1516740389.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:30.099Z,1516740390.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:30.492Z,1516740390.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:30.895Z,1516740390.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:31.301Z,1516740391.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:31.700Z,1516740391.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:32.098Z,1516740392.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:32.493Z,1516740392.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:32.897Z,1516740392.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:33.306Z,1516740393.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:33.714Z,1516740393.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:34.097Z,1516740394.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:34.501Z,1516740394.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:34.879Z,1516740394.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:35.274Z,1516740395.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:35.684Z,1516740395.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:36.115Z,1516740396.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:36.487Z,1516740396.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:36.912Z,1516740396.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:37.302Z,1516740397.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:37.684Z,1516740397.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:38.082Z,1516740398.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:38.484Z,1516740398.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:38.881Z,1516740398.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:39.286Z,1516740399.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:39.688Z,1516740399.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:40.086Z,1516740400.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:40.493Z,1516740400.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:40.883Z,1516740400.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:41.285Z,1516740401.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:41.694Z,1516740401.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:42.093Z,1516740402.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:42.494Z,1516740402.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:42.894Z,1516740402.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:43.283Z,1516740403.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:43.684Z,1516740403.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:44.108Z,1516740404.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:44.530Z,1516740404.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:44.894Z,1516740404.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:45.305Z,1516740405.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:45.722Z,1516740405.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:46.111Z,1516740406.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:46.524Z,1516740406.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:46.950Z,1516740406.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:47.306Z,1516740407.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:47.714Z,1516740407.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:48.128Z,1516740408.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:48.521Z,1516740408.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:48.926Z,1516740408.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:49.328Z,1516740409.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:49.694Z,1516740409.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:50.090Z,1516740410.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:50.487Z,1516740410.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:50.910Z,1516740410.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:51.341Z,1516740411.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:51.703Z,1516740411.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:52.101Z,1516740412.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:52.502Z,1516740412.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:52.924Z,1516740412.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:53.314Z,1516740413.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:53.686Z,1516740413.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:54.144Z,1516740414.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:54.490Z,1516740414.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:54.893Z,1516740414.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:55.301Z,1516740415.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:55.689Z,1516740415.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:56.088Z,1516740416.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:56.486Z,1516740416.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:56.884Z,1516740416.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:57.338Z,1516740417.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:57.709Z,1516740417.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:58.102Z,1516740418.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:58.501Z,1516740418.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:58.952Z,1516740418.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:59.306Z,1516740419.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:46:59.764Z,1516740419.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:00.176Z,1516740420.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:00.513Z,1516740420.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:00.939Z,1516740420.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:01.337Z,1516740421.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:01.689Z,1516740421.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:02.115Z,1516740422.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:02.549Z,1516740422.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:02.914Z,1516740422.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:03.305Z,1516740423.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:03.725Z,1516740423.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:04.124Z,1516740424.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:04.497Z,1516740424.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:04.931Z,1516740424.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:05.297Z,1516740425.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:05.713Z,1516740425.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:06.139Z,1516740426.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:06.517Z,1516740426.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:06.909Z,1516740426.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:07.304Z,1516740427.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:07.704Z,1516740427.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:08.112Z,1516740428.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:08.524Z,1516740428.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:08.924Z,1516740428.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:09.328Z,1516740429.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:09.740Z,1516740429.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:10.109Z,1516740430.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:10.498Z,1516740430.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:10.927Z,1516740430.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:11.298Z,1516740431.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:11.710Z,1516740431.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:12.139Z,1516740432.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:12.513Z,1516740432.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:12.925Z,1516740432.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:13.336Z,1516740433.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:13.717Z,1516740433.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:14.117Z,1516740434.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:14.540Z,1516740434.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:14.923Z,1516740434.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:15.301Z,1516740435.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:15.740Z,1516740435.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:16.097Z,1516740436.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:16.491Z,1516740436.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:16.896Z,1516740436.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:17.290Z,1516740437.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:17.695Z,1516740437.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:18.100Z,1516740438.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:18.496Z,1516740438.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:18.897Z,1516740438.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:19.296Z,1516740439.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:19.690Z,1516740439.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:20.093Z,1516740440.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:20.496Z,1516740440.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:20.873Z,1516740440.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:21.298Z,1516740441.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:21.703Z,1516740441.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:22.095Z,1516740442.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:25.207Z,1516740445.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:25.309Z,1516740445.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:25.690Z,1516740445.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:26.116Z,1516740446.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:26.494Z,1516740446.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:26.883Z,1516740446.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:27.280Z,1516740447.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:27.679Z,1516740447.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:28.089Z,1516740448.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:28.484Z,1516740448.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:28.889Z,1516740448.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:29.283Z,1516740449.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:29.681Z,1516740449.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:30.079Z,1516740450.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:30.488Z,1516740450.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:30.881Z,1516740450.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:31.290Z,1516740451.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:31.697Z,1516740451.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:32.094Z,1516740452.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:32.545Z,1516740452.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:32.881Z,1516740452.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:33.293Z,1516740453.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:33.688Z,1516740453.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:34.097Z,1516740454.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:34.494Z,1516740454.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:34.894Z,1516740454.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:35.345Z,1516740455.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:35.684Z,1516740455.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:36.093Z,1516740456.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:36.481Z,1516740456.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:36.888Z,1516740456.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:37.294Z,1516740457.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:37.694Z,1516740457.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:37.696Z,1516740457.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:37.696Z,1516740457.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 349 2018-01-23T20:47:37.696Z,1516740457.696 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:47:37.720Z,1516740457.720 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:47:38.104Z,1516740458.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:38.136Z,1516740458.136 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:47:38.136Z,1516740458.136 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 349 2018-01-23T20:47:38.489Z,1516740458.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:38.490Z,1516740458.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:47:38.490Z,1516740458.490 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:47:38.491Z,1516740458.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:47:38.888Z,1516740458.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:39.284Z,1516740459.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:39.690Z,1516740459.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:40.091Z,1516740460.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:40.497Z,1516740460.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:40.891Z,1516740460.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:41.285Z,1516740461.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:41.683Z,1516740461.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:42.089Z,1516740462.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:42.488Z,1516740462.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:42.888Z,1516740462.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:43.294Z,1516740463.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:43.704Z,1516740463.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:44.092Z,1516740464.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:44.487Z,1516740464.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:44.891Z,1516740464.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:45.293Z,1516740465.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:45.756Z,1516740465.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:46.094Z,1516740466.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:46.494Z,1516740466.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:46.890Z,1516740466.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:47.289Z,1516740467.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:47.693Z,1516740467.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:48.091Z,1516740468.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:48.484Z,1516740468.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:48.902Z,1516740468.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:49.293Z,1516740469.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:49.709Z,1516740469.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:50.096Z,1516740470.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:50.493Z,1516740470.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:50.877Z,1516740470.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:51.280Z,1516740471.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:51.681Z,1516740471.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:52.107Z,1516740472.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:52.510Z,1516740472.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:52.886Z,1516740472.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:52.903Z,1516740472.903 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 349 2018-01-23T20:47:52.903Z,1516740472.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:47:52.905Z,1516740472.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:52.905Z,1516740472.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 349 2018-01-23T20:47:52.905Z,1516740472.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:47:52.930Z,1516740472.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:47:52.930Z,1516740472.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:47:53.291Z,1516740473.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:47:53.291Z,1516740473.291 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 349 2018-01-23T20:47:53.292Z,1516740473.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:47:53.292Z,1516740473.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 349 2018-01-23T20:47:53.677Z,1516740473.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:47:53.677Z,1516740473.677 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:47:53.677Z,1516740473.677 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:47:53.678Z,1516740473.678 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:47:53.678Z,1516740473.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:47:53.679Z,1516740473.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:47:54.078Z,1516740474.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:47:54.079Z,1516740474.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:54.481Z,1516740474.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:47:54.482Z,1516740474.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:54.879Z,1516740474.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:47:54.880Z,1516740474.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:55.288Z,1516740475.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:47:55.289Z,1516740475.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:55.685Z,1516740475.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:47:55.686Z,1516740475.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:56.084Z,1516740476.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:47:56.085Z,1516740476.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:56.478Z,1516740476.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:47:56.479Z,1516740476.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:56.884Z,1516740476.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:47:56.885Z,1516740476.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:57.280Z,1516740477.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:47:57.281Z,1516740477.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:57.679Z,1516740477.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:47:57.680Z,1516740477.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:58.089Z,1516740478.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:47:58.090Z,1516740478.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:58.496Z,1516740478.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:47:58.497Z,1516740478.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:58.889Z,1516740478.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:47:58.890Z,1516740478.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:59.278Z,1516740479.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:47:59.279Z,1516740479.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:47:59.679Z,1516740479.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:47:59.680Z,1516740479.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:00.078Z,1516740480.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:48:00.079Z,1516740480.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:00.487Z,1516740480.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:48:00.488Z,1516740480.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:00.883Z,1516740480.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:48:00.884Z,1516740480.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:01.289Z,1516740481.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:48:01.290Z,1516740481.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:01.696Z,1516740481.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:48:01.697Z,1516740481.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:02.100Z,1516740482.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:48:02.101Z,1516740482.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:02.478Z,1516740482.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:48:02.479Z,1516740482.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:02.889Z,1516740482.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:48:02.890Z,1516740482.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:03.280Z,1516740483.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:48:03.281Z,1516740483.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:03.680Z,1516740483.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:48:03.681Z,1516740483.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:04.089Z,1516740484.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:48:04.090Z,1516740484.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:04.500Z,1516740484.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:48:04.501Z,1516740484.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:04.890Z,1516740484.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:48:04.891Z,1516740484.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:05.286Z,1516740485.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:48:05.287Z,1516740485.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:05.691Z,1516740485.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:48:05.692Z,1516740485.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:06.090Z,1516740486.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:48:06.092Z,1516740486.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:06.493Z,1516740486.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:48:06.494Z,1516740486.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:06.887Z,1516740486.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:48:06.888Z,1516740486.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:07.281Z,1516740487.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:48:07.282Z,1516740487.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:07.687Z,1516740487.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:48:07.688Z,1516740487.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:08.100Z,1516740488.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:48:08.101Z,1516740488.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:08.488Z,1516740488.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:48:08.489Z,1516740488.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:08.900Z,1516740488.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:48:08.901Z,1516740488.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:09.288Z,1516740489.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:48:09.289Z,1516740489.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:09.687Z,1516740489.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:48:09.688Z,1516740489.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:10.100Z,1516740490.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:48:10.101Z,1516740490.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:10.485Z,1516740490.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:48:10.487Z,1516740490.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:10.898Z,1516740490.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:48:10.903Z,1516740490.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:11.292Z,1516740491.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:48:11.293Z,1516740491.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:11.680Z,1516740491.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:48:11.681Z,1516740491.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:12.083Z,1516740492.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:48:12.084Z,1516740492.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:12.508Z,1516740492.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:48:12.509Z,1516740492.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:12.894Z,1516740492.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:13.289Z,1516740493.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:13.681Z,1516740493.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:14.088Z,1516740494.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:14.489Z,1516740494.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:14.893Z,1516740494.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:15.284Z,1516740495.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:15.693Z,1516740495.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:16.089Z,1516740496.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:16.490Z,1516740496.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:16.885Z,1516740496.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:17.281Z,1516740497.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:17.680Z,1516740497.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:18.089Z,1516740498.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:18.486Z,1516740498.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:18.885Z,1516740498.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:19.281Z,1516740499.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:19.684Z,1516740499.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:20.092Z,1516740500.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:20.489Z,1516740500.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:20.889Z,1516740500.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:20.892Z,1516740500.892 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:48:20.892Z,1516740500.892 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:48:20.892Z,1516740500.892 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:48:20.892Z,1516740500.892 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:48:21.280Z,1516740501.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:21.283Z,1516740501.283 [Default:CheckIn:D] Stopped 2018-01-23T20:48:21.284Z,1516740501.284 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:48:21.690Z,1516740501.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:21.693Z,1516740501.693 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1050.487044 min 2018-01-23T20:48:21.693Z,1516740501.693 [Default:CheckIn:E] Stopped 2018-01-23T20:48:21.693Z,1516740501.693 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:48:21.693Z,1516740501.693 [Default:CheckIn] Stopped 2018-01-23T20:48:21.693Z,1516740501.693 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:48:21.694Z,1516740501.694 [Default:CheckIn](INFO): Running loop #103 2018-01-23T20:48:21.694Z,1516740501.694 [Default:CheckIn] Running Loop=103 2018-01-23T20:48:21.694Z,1516740501.694 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:48:21.694Z,1516740501.694 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:48:22.089Z,1516740502.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:22.500Z,1516740502.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:25.579Z,1516740505.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:25.732Z,1516740505.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:26.049Z,1516740506.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:26.450Z,1516740506.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:26.845Z,1516740506.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:27.265Z,1516740507.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:27.665Z,1516740507.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:28.054Z,1516740508.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:28.443Z,1516740508.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:28.848Z,1516740508.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:29.245Z,1516740509.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:29.648Z,1516740509.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:30.055Z,1516740510.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:30.455Z,1516740510.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:30.857Z,1516740510.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:31.263Z,1516740511.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:31.652Z,1516740511.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:32.051Z,1516740512.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:32.448Z,1516740512.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:32.851Z,1516740512.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:33.255Z,1516740513.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:33.658Z,1516740513.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:34.055Z,1516740514.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:34.453Z,1516740514.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:34.855Z,1516740514.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:35.252Z,1516740515.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:35.651Z,1516740515.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:36.054Z,1516740516.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:36.455Z,1516740516.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:36.865Z,1516740516.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:37.258Z,1516740517.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:37.649Z,1516740517.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:38.051Z,1516740518.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:38.456Z,1516740518.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:38.853Z,1516740518.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:39.260Z,1516740519.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:39.659Z,1516740519.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:40.055Z,1516740520.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:40.451Z,1516740520.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:40.847Z,1516740520.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:41.252Z,1516740521.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:41.652Z,1516740521.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:42.054Z,1516740522.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:42.458Z,1516740522.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:42.862Z,1516740522.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:43.260Z,1516740523.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:43.645Z,1516740523.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:44.049Z,1516740524.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:44.454Z,1516740524.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:44.852Z,1516740524.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:45.258Z,1516740525.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:45.670Z,1516740525.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:46.063Z,1516740526.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:46.441Z,1516740526.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:46.843Z,1516740526.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:47.237Z,1516740527.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:47.645Z,1516740527.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:48.041Z,1516740528.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:48.467Z,1516740528.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:48.872Z,1516740528.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:49.275Z,1516740529.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:49.645Z,1516740529.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:50.053Z,1516740530.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:50.445Z,1516740530.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:50.845Z,1516740530.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:51.247Z,1516740531.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:51.651Z,1516740531.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:52.046Z,1516740532.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:52.442Z,1516740532.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:52.845Z,1516740532.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:53.244Z,1516740533.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:53.643Z,1516740533.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:54.053Z,1516740534.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:54.453Z,1516740534.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:54.850Z,1516740534.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:55.246Z,1516740535.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:55.645Z,1516740535.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:56.049Z,1516740536.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:56.443Z,1516740536.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:56.849Z,1516740536.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:57.246Z,1516740537.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:57.679Z,1516740537.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:58.049Z,1516740538.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:58.442Z,1516740538.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:58.844Z,1516740538.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:59.246Z,1516740539.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:48:59.653Z,1516740539.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:00.043Z,1516740540.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:00.449Z,1516740540.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:00.850Z,1516740540.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:01.249Z,1516740541.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:01.646Z,1516740541.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:02.049Z,1516740542.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:02.449Z,1516740542.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:02.846Z,1516740542.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:03.249Z,1516740543.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:03.678Z,1516740543.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:04.049Z,1516740544.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:04.443Z,1516740544.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:04.848Z,1516740544.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:05.243Z,1516740545.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:05.646Z,1516740545.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:06.044Z,1516740546.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:06.453Z,1516740546.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:06.855Z,1516740546.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:07.250Z,1516740547.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:07.653Z,1516740547.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:08.053Z,1516740548.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:08.447Z,1516740548.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:08.853Z,1516740548.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:09.250Z,1516740549.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:09.650Z,1516740549.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:10.053Z,1516740550.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:10.447Z,1516740550.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:10.853Z,1516740550.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:11.244Z,1516740551.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:11.646Z,1516740551.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:12.048Z,1516740552.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:12.453Z,1516740552.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:12.856Z,1516740552.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:13.254Z,1516740553.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:13.653Z,1516740553.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:14.049Z,1516740554.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:14.453Z,1516740554.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:14.843Z,1516740554.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:15.253Z,1516740555.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:15.664Z,1516740555.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:16.053Z,1516740556.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:16.449Z,1516740556.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:16.848Z,1516740556.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:17.249Z,1516740557.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:17.648Z,1516740557.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:18.047Z,1516740558.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:18.455Z,1516740558.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:18.857Z,1516740558.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:19.265Z,1516740559.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:19.657Z,1516740559.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:20.053Z,1516740560.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:20.453Z,1516740560.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:20.845Z,1516740560.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:21.259Z,1516740561.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:21.666Z,1516740561.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:22.055Z,1516740562.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:22.461Z,1516740562.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:22.854Z,1516740562.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:25.930Z,1516740565.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:26.058Z,1516740566.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:26.452Z,1516740566.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:26.856Z,1516740566.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:27.251Z,1516740567.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:27.653Z,1516740567.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:28.025Z,1516740568.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:28.428Z,1516740568.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:28.838Z,1516740568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:29.238Z,1516740569.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:29.637Z,1516740569.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:30.037Z,1516740570.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:30.430Z,1516740570.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:30.836Z,1516740570.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:31.227Z,1516740571.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:31.628Z,1516740571.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:32.030Z,1516740572.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:32.450Z,1516740572.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:32.841Z,1516740572.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:33.245Z,1516740573.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:33.636Z,1516740573.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:34.036Z,1516740574.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:34.433Z,1516740574.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:34.830Z,1516740574.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:35.238Z,1516740575.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:35.652Z,1516740575.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:36.049Z,1516740576.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:36.430Z,1516740576.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:36.839Z,1516740576.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:37.238Z,1516740577.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:37.638Z,1516740577.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:38.039Z,1516740578.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:38.443Z,1516740578.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:38.842Z,1516740578.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:39.251Z,1516740579.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:39.637Z,1516740579.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:40.040Z,1516740580.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:40.445Z,1516740580.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:40.843Z,1516740580.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:41.261Z,1516740581.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:41.649Z,1516740581.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:42.043Z,1516740582.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:42.445Z,1516740582.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:42.843Z,1516740582.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:43.250Z,1516740583.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:43.646Z,1516740583.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:44.053Z,1516740584.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:44.445Z,1516740584.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:44.830Z,1516740584.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:45.255Z,1516740585.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:45.655Z,1516740585.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:46.055Z,1516740586.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:46.430Z,1516740586.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:46.827Z,1516740586.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:47.238Z,1516740587.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:47.662Z,1516740587.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:48.033Z,1516740588.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:48.429Z,1516740588.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:48.830Z,1516740588.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:49.238Z,1516740589.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:49.652Z,1516740589.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:50.034Z,1516740590.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:50.431Z,1516740590.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:50.830Z,1516740590.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:51.236Z,1516740591.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:51.641Z,1516740591.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:52.037Z,1516740592.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:52.434Z,1516740592.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:52.845Z,1516740592.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:53.229Z,1516740593.229 [PNI_TCM](ERROR): CRC does not match. Expected:0x19141 got:0x48415 2018-01-23T20:49:53.268Z,1516740593.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:53.641Z,1516740593.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:54.038Z,1516740594.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:54.456Z,1516740594.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:54.822Z,1516740594.822 [PNI_TCM](ERROR): CRC does not match. Expected:0x41697 got:0x50592 2018-01-23T20:49:54.863Z,1516740594.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:55.234Z,1516740595.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:55.636Z,1516740595.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:56.060Z,1516740596.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:56.424Z,1516740596.424 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T20:49:56.441Z,1516740596.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:56.830Z,1516740596.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:57.239Z,1516740597.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:57.659Z,1516740597.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:58.033Z,1516740598.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x52438 got:0x49815 2018-01-23T20:49:58.069Z,1516740598.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:58.433Z,1516740598.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:58.830Z,1516740598.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:59.264Z,1516740599.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:49:59.632Z,1516740599.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x60226 got:0x49689 2018-01-23T20:49:59.668Z,1516740599.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:00.039Z,1516740600.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:00.434Z,1516740600.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:00.845Z,1516740600.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:01.245Z,1516740601.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:01.640Z,1516740601.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:02.042Z,1516740602.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:02.461Z,1516740602.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:02.835Z,1516740602.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:03.246Z,1516740603.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:03.645Z,1516740603.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:04.068Z,1516740604.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:04.440Z,1516740604.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.372412 seconds old. 2018-01-23T20:50:04.441Z,1516740604.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:04.442Z,1516740604.442 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.372741 seconds old. 2018-01-23T20:50:04.443Z,1516740604.443 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.373092 seconds old. 2018-01-23T20:50:04.837Z,1516740604.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.769341 seconds old. 2018-01-23T20:50:04.838Z,1516740604.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:04.839Z,1516740604.839 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.769676 seconds old. 2018-01-23T20:50:04.840Z,1516740604.840 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.770654 seconds old. 2018-01-23T20:50:05.244Z,1516740605.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.177041 seconds old. 2018-01-23T20:50:05.245Z,1516740605.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:05.246Z,1516740605.246 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.177361 seconds old. 2018-01-23T20:50:05.248Z,1516740605.248 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.177927 seconds old. 2018-01-23T20:50:05.663Z,1516740605.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.595236 seconds old. 2018-01-23T20:50:05.664Z,1516740605.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:05.665Z,1516740605.665 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595798 seconds old. 2018-01-23T20:50:05.666Z,1516740605.666 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.596133 seconds old. 2018-01-23T20:50:06.044Z,1516740606.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:06.438Z,1516740606.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:06.833Z,1516740606.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:07.252Z,1516740607.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:07.646Z,1516740607.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:08.041Z,1516740608.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:08.432Z,1516740608.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:08.867Z,1516740608.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:09.247Z,1516740609.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:09.645Z,1516740609.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:10.045Z,1516740610.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:10.446Z,1516740610.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:10.830Z,1516740610.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:11.248Z,1516740611.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:11.644Z,1516740611.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:12.045Z,1516740612.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:12.431Z,1516740612.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:12.841Z,1516740612.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:13.241Z,1516740613.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:13.670Z,1516740613.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:14.038Z,1516740614.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:14.441Z,1516740614.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:14.837Z,1516740614.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:15.235Z,1516740615.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:15.637Z,1516740615.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:16.046Z,1516740616.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:16.445Z,1516740616.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:16.841Z,1516740616.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:17.236Z,1516740617.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:17.635Z,1516740617.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:18.034Z,1516740618.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:18.440Z,1516740618.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:18.850Z,1516740618.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:19.246Z,1516740619.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:19.641Z,1516740619.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:20.041Z,1516740620.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:20.441Z,1516740620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:20.840Z,1516740620.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:21.248Z,1516740621.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:21.651Z,1516740621.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:22.041Z,1516740622.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:22.453Z,1516740622.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:22.838Z,1516740622.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:23.236Z,1516740623.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:26.341Z,1516740626.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:26.482Z,1516740626.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:26.830Z,1516740626.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:27.233Z,1516740627.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:27.626Z,1516740627.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:28.029Z,1516740628.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:28.435Z,1516740628.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:28.808Z,1516740628.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:29.233Z,1516740629.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:29.613Z,1516740629.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:30.014Z,1516740630.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:30.410Z,1516740630.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:30.806Z,1516740630.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:31.208Z,1516740631.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:31.606Z,1516740631.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:32.008Z,1516740632.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:32.441Z,1516740632.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:32.814Z,1516740632.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:33.216Z,1516740633.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:33.609Z,1516740633.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:34.008Z,1516740634.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:34.408Z,1516740634.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:34.808Z,1516740634.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:35.208Z,1516740635.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:35.618Z,1516740635.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:36.023Z,1516740636.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:36.418Z,1516740636.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:36.820Z,1516740636.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:37.206Z,1516740637.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:37.617Z,1516740637.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:38.023Z,1516740638.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:38.429Z,1516740638.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:38.832Z,1516740638.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:38.835Z,1516740638.835 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:38.835Z,1516740638.835 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 350 2018-01-23T20:50:38.835Z,1516740638.835 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:50:38.847Z,1516740638.847 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:50:39.225Z,1516740639.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:39.237Z,1516740639.237 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:50:39.237Z,1516740639.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 350 2018-01-23T20:50:39.624Z,1516740639.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:39.625Z,1516740639.625 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:50:39.625Z,1516740639.625 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:50:39.626Z,1516740639.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:50:40.025Z,1516740640.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:40.433Z,1516740640.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:40.813Z,1516740640.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:41.209Z,1516740641.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:41.641Z,1516740641.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:42.010Z,1516740642.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:42.438Z,1516740642.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:42.808Z,1516740642.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:43.213Z,1516740643.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:43.613Z,1516740643.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:44.013Z,1516740644.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:44.411Z,1516740644.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:44.815Z,1516740644.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:45.211Z,1516740645.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:45.607Z,1516740645.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:46.006Z,1516740646.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:46.407Z,1516740646.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:46.810Z,1516740646.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:47.207Z,1516740647.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:47.621Z,1516740647.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:48.025Z,1516740648.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:48.425Z,1516740648.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:48.813Z,1516740648.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:49.218Z,1516740649.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:49.617Z,1516740649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:50.021Z,1516740650.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:50.421Z,1516740650.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:50.821Z,1516740650.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:51.219Z,1516740651.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:51.617Z,1516740651.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:52.015Z,1516740652.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:52.416Z,1516740652.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:52.815Z,1516740652.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:53.215Z,1516740653.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:53.624Z,1516740653.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:54.022Z,1516740654.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:54.022Z,1516740654.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 350 2018-01-23T20:50:54.022Z,1516740654.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:50:54.024Z,1516740654.024 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:54.024Z,1516740654.024 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 350 2018-01-23T20:50:54.024Z,1516740654.024 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:50:54.037Z,1516740654.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:50:54.037Z,1516740654.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:50:54.433Z,1516740654.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:50:54.433Z,1516740654.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 350 2018-01-23T20:50:54.433Z,1516740654.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:50:54.433Z,1516740654.433 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 350 2018-01-23T20:50:54.810Z,1516740654.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:50:54.813Z,1516740654.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:50:54.814Z,1516740654.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:50:54.815Z,1516740654.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:50:54.815Z,1516740654.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:50:54.816Z,1516740654.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:50:55.218Z,1516740655.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:50:55.219Z,1516740655.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:55.611Z,1516740655.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:50:55.612Z,1516740655.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:56.020Z,1516740656.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:50:56.021Z,1516740656.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:56.426Z,1516740656.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:50:56.427Z,1516740656.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:56.836Z,1516740656.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:50:56.837Z,1516740656.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:57.240Z,1516740657.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:50:57.241Z,1516740657.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:57.628Z,1516740657.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:50:57.629Z,1516740657.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:58.007Z,1516740658.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:50:58.008Z,1516740658.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:58.407Z,1516740658.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:50:58.408Z,1516740658.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:58.813Z,1516740658.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:50:58.814Z,1516740658.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:59.213Z,1516740659.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:50:59.214Z,1516740659.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:50:59.610Z,1516740659.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:50:59.612Z,1516740659.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:00.034Z,1516740660.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:51:00.039Z,1516740660.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:00.422Z,1516740660.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:51:00.444Z,1516740660.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:00.812Z,1516740660.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:51:00.813Z,1516740660.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:01.207Z,1516740661.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:51:01.208Z,1516740661.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:01.609Z,1516740661.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:51:01.610Z,1516740661.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:02.007Z,1516740662.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:51:02.008Z,1516740662.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:02.416Z,1516740662.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:51:02.417Z,1516740662.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:02.813Z,1516740662.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:51:02.814Z,1516740662.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:03.212Z,1516740663.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:51:03.213Z,1516740663.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:03.606Z,1516740663.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:51:03.607Z,1516740663.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:04.006Z,1516740664.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:51:04.007Z,1516740664.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:04.407Z,1516740664.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:51:04.408Z,1516740664.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:04.808Z,1516740664.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:51:04.809Z,1516740664.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:05.206Z,1516740665.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:51:05.207Z,1516740665.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:05.620Z,1516740665.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:51:05.621Z,1516740665.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:06.020Z,1516740666.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:51:06.021Z,1516740666.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:06.416Z,1516740666.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:51:06.417Z,1516740666.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:06.807Z,1516740666.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:51:06.808Z,1516740666.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:07.208Z,1516740667.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:51:07.209Z,1516740667.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:07.615Z,1516740667.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:51:07.616Z,1516740667.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:08.011Z,1516740668.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:51:08.012Z,1516740668.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:08.420Z,1516740668.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:51:08.421Z,1516740668.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:08.824Z,1516740668.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:51:08.825Z,1516740668.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:09.228Z,1516740669.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:51:09.229Z,1516740669.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:09.616Z,1516740669.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:51:09.617Z,1516740669.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:10.016Z,1516740670.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:51:10.017Z,1516740670.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:10.411Z,1516740670.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:51:10.412Z,1516740670.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:10.809Z,1516740670.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:51:10.810Z,1516740670.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:11.208Z,1516740671.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:51:11.209Z,1516740671.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:11.618Z,1516740671.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:51:11.619Z,1516740671.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:12.021Z,1516740672.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:51:12.022Z,1516740672.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:12.424Z,1516740672.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:51:12.425Z,1516740672.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:12.809Z,1516740672.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:51:12.809Z,1516740672.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:13.209Z,1516740673.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:51:13.209Z,1516740673.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:13.609Z,1516740673.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:51:13.610Z,1516740673.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:14.008Z,1516740674.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T20:51:14.009Z,1516740674.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:14.418Z,1516740674.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:14.825Z,1516740674.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:15.221Z,1516740675.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:15.612Z,1516740675.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:16.009Z,1516740676.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:16.408Z,1516740676.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:16.809Z,1516740676.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:17.218Z,1516740677.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:17.619Z,1516740677.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:18.021Z,1516740678.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:18.417Z,1516740678.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:18.817Z,1516740678.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:19.210Z,1516740679.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:19.617Z,1516740679.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:20.009Z,1516740680.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:20.418Z,1516740680.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:20.820Z,1516740680.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:21.224Z,1516740681.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:21.613Z,1516740681.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:22.010Z,1516740682.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:22.408Z,1516740682.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:22.811Z,1516740682.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:23.218Z,1516740683.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:23.620Z,1516740683.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:26.715Z,1516740686.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:26.865Z,1516740686.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:27.181Z,1516740687.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:27.585Z,1516740687.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:27.985Z,1516740687.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:28.382Z,1516740688.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:28.786Z,1516740688.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:29.182Z,1516740689.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:29.579Z,1516740689.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:29.986Z,1516740689.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:30.386Z,1516740690.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:30.786Z,1516740690.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:31.186Z,1516740691.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:31.580Z,1516740691.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:31.982Z,1516740691.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:32.395Z,1516740692.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:32.794Z,1516740692.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:33.198Z,1516740693.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:33.598Z,1516740693.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:33.982Z,1516740693.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:34.393Z,1516740694.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:34.802Z,1516740694.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:35.193Z,1516740695.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:35.585Z,1516740695.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:35.996Z,1516740695.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:36.401Z,1516740696.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:36.806Z,1516740696.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:37.204Z,1516740697.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:37.588Z,1516740697.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:37.977Z,1516740697.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:38.404Z,1516740698.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:38.801Z,1516740698.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:39.206Z,1516740699.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:39.608Z,1516740699.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:39.981Z,1516740699.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:40.410Z,1516740700.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:40.789Z,1516740700.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:41.182Z,1516740701.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:41.581Z,1516740701.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:41.989Z,1516740701.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:42.394Z,1516740702.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:42.790Z,1516740702.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:43.185Z,1516740703.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:43.581Z,1516740703.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:43.980Z,1516740703.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:44.392Z,1516740704.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:44.786Z,1516740704.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:45.189Z,1516740705.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:45.581Z,1516740705.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:45.978Z,1516740705.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:46.389Z,1516740706.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:46.786Z,1516740706.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:47.186Z,1516740707.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:47.581Z,1516740707.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:47.980Z,1516740707.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:48.387Z,1516740708.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:48.786Z,1516740708.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:49.185Z,1516740709.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:49.581Z,1516740709.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:49.979Z,1516740709.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:50.386Z,1516740710.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:50.790Z,1516740710.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:51.193Z,1516740711.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:51.581Z,1516740711.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:51.982Z,1516740711.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:52.381Z,1516740712.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:52.785Z,1516740712.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:53.193Z,1516740713.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:53.593Z,1516740713.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:53.981Z,1516740713.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:54.379Z,1516740714.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:54.781Z,1516740714.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:55.180Z,1516740715.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:55.589Z,1516740715.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:55.986Z,1516740715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:56.386Z,1516740716.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:56.784Z,1516740716.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:57.188Z,1516740717.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:57.581Z,1516740717.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:57.980Z,1516740717.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:58.380Z,1516740718.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:58.790Z,1516740718.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:59.190Z,1516740719.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:59.594Z,1516740719.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:51:59.981Z,1516740719.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:00.379Z,1516740720.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:00.782Z,1516740720.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:01.190Z,1516740721.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:01.589Z,1516740721.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:01.997Z,1516740721.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:02.390Z,1516740722.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:02.785Z,1516740722.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:03.180Z,1516740723.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:03.589Z,1516740723.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:03.984Z,1516740723.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:04.380Z,1516740724.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:04.789Z,1516740724.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:05.193Z,1516740725.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:05.590Z,1516740725.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:05.980Z,1516740725.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:06.380Z,1516740726.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:06.790Z,1516740726.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:07.188Z,1516740727.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:07.589Z,1516740727.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:07.993Z,1516740727.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:08.390Z,1516740728.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:08.789Z,1516740728.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:09.189Z,1516740729.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:09.588Z,1516740729.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:09.984Z,1516740729.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:10.393Z,1516740730.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:10.791Z,1516740730.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:11.189Z,1516740731.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:11.590Z,1516740731.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:11.981Z,1516740731.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:12.381Z,1516740732.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:12.787Z,1516740732.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:13.190Z,1516740733.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:13.590Z,1516740733.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:13.991Z,1516740733.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:14.396Z,1516740734.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:14.781Z,1516740734.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:15.193Z,1516740735.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:15.581Z,1516740735.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:15.980Z,1516740735.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:16.381Z,1516740736.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:16.790Z,1516740736.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:17.190Z,1516740737.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:17.588Z,1516740737.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:17.980Z,1516740737.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:18.378Z,1516740738.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:18.788Z,1516740738.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:19.183Z,1516740739.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:19.589Z,1516740739.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:19.992Z,1516740739.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:20.390Z,1516740740.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:20.781Z,1516740740.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:21.189Z,1516740741.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:21.584Z,1516740741.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:21.983Z,1516740741.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:22.390Z,1516740742.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:22.790Z,1516740742.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:23.189Z,1516740743.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:23.590Z,1516740743.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:23.981Z,1516740743.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:27.084Z,1516740747.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:27.221Z,1516740747.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:27.571Z,1516740747.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:27.973Z,1516740747.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:28.375Z,1516740748.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:28.777Z,1516740748.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:29.151Z,1516740749.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:29.553Z,1516740749.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:29.949Z,1516740749.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:30.346Z,1516740750.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:30.754Z,1516740750.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:31.154Z,1516740751.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:31.577Z,1516740751.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:31.948Z,1516740751.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:32.346Z,1516740752.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:32.748Z,1516740752.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:33.150Z,1516740753.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:33.550Z,1516740753.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:33.954Z,1516740753.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:34.362Z,1516740754.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:34.749Z,1516740754.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:35.149Z,1516740755.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:35.548Z,1516740755.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:35.950Z,1516740755.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:36.349Z,1516740756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:36.761Z,1516740756.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:37.155Z,1516740757.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:37.554Z,1516740757.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:37.948Z,1516740757.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:38.347Z,1516740758.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:38.749Z,1516740758.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:39.147Z,1516740759.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:39.558Z,1516740759.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:39.957Z,1516740759.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:40.357Z,1516740760.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:40.753Z,1516740760.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:41.151Z,1516740761.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:41.547Z,1516740761.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:41.956Z,1516740761.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:42.347Z,1516740762.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:42.757Z,1516740762.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:43.154Z,1516740763.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:43.553Z,1516740763.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:43.957Z,1516740763.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:44.352Z,1516740764.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:44.749Z,1516740764.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:45.147Z,1516740765.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:45.557Z,1516740765.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:45.954Z,1516740765.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:46.357Z,1516740766.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:46.751Z,1516740766.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:47.149Z,1516740767.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:47.553Z,1516740767.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:47.949Z,1516740767.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:48.349Z,1516740768.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:48.754Z,1516740768.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:49.121Z,1516740769.121 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T20:52:49.121Z,1516740769.121 [NAL9602] Data Fault, FailCount= 1 2018-01-23T20:52:49.122Z,1516740769.122 [NAL9602](ERROR): Data Fault 2018-01-23T20:52:49.157Z,1516740769.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:49.190Z,1516740769.190 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T20:52:49.508Z,1516740769.508 [NAL9602](INFO): Powering down 2018-01-23T20:52:49.555Z,1516740769.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:49.949Z,1516740769.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:50.349Z,1516740770.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:50.362Z,1516740770.362 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T20:52:50.362Z,1516740770.362 [NAL9602] No Fault, FailCount= 1 2018-01-23T20:52:50.762Z,1516740770.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:51.157Z,1516740771.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:51.549Z,1516740771.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:51.952Z,1516740771.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:52.349Z,1516740772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:52.757Z,1516740772.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:53.152Z,1516740773.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:53.544Z,1516740773.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:53.956Z,1516740773.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:54.353Z,1516740774.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:54.747Z,1516740774.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:55.157Z,1516740775.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:55.553Z,1516740775.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:55.953Z,1516740775.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:56.345Z,1516740776.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:56.746Z,1516740776.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:57.146Z,1516740777.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:57.557Z,1516740777.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:57.950Z,1516740777.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:58.346Z,1516740778.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:58.750Z,1516740778.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:59.150Z,1516740779.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:59.548Z,1516740779.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:52:59.956Z,1516740779.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:00.356Z,1516740780.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:00.755Z,1516740780.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:01.159Z,1516740781.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:01.559Z,1516740781.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:01.951Z,1516740781.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:02.365Z,1516740782.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:02.752Z,1516740782.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:03.144Z,1516740783.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:03.557Z,1516740783.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:03.955Z,1516740783.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:04.347Z,1516740784.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:04.751Z,1516740784.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:05.141Z,1516740785.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:05.539Z,1516740785.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:05.967Z,1516740785.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:06.343Z,1516740786.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:06.743Z,1516740786.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:07.148Z,1516740787.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:07.551Z,1516740787.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:07.948Z,1516740787.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:08.350Z,1516740788.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:08.765Z,1516740788.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:09.146Z,1516740789.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:09.575Z,1516740789.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:09.947Z,1516740789.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:10.345Z,1516740790.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:10.752Z,1516740790.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:11.152Z,1516740791.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:11.554Z,1516740791.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:11.951Z,1516740791.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:12.349Z,1516740792.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:12.752Z,1516740792.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:13.150Z,1516740793.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:13.548Z,1516740793.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:13.949Z,1516740793.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:14.353Z,1516740794.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:14.752Z,1516740794.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:15.148Z,1516740795.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:15.559Z,1516740795.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:15.951Z,1516740795.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:16.365Z,1516740796.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:16.742Z,1516740796.742 [PNI_TCM](ERROR): CRC does not match. Expected:0x53112 got:0x31772 2018-01-23T20:53:16.784Z,1516740796.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:17.150Z,1516740797.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:17.549Z,1516740797.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:17.978Z,1516740797.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:18.342Z,1516740798.342 [PNI_TCM](ERROR): CRC does not match. Expected:0x55625 got:0x16785 2018-01-23T20:53:18.361Z,1516740798.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:18.754Z,1516740798.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:19.150Z,1516740799.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:19.557Z,1516740799.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:19.908Z,1516740799.908 [NAL9602](INFO): Powering up NAL9602 2018-01-23T20:53:19.947Z,1516740799.947 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347 2018-01-23T20:53:19.981Z,1516740799.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:20.352Z,1516740800.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:20.756Z,1516740800.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:21.169Z,1516740801.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:21.548Z,1516740801.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501 2018-01-23T20:53:21.573Z,1516740801.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:21.953Z,1516740801.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:21.957Z,1516740801.957 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:48:21.7Z 2018-01-23T20:53:21.957Z,1516740801.957 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T20:53:21.957Z,1516740801.957 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T20:53:22.350Z,1516740802.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:22.902Z,1516740802.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:23.157Z,1516740803.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:26.310Z,1516740806.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:26.391Z,1516740806.391 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0412.lzma 2018-01-23T20:53:26.426Z,1516740806.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:26.785Z,1516740806.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:27.138Z,1516740807.138 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0412.lzma.bak 2018-01-23T20:53:27.138Z,1516740807.138 [DataOverHttps](INFO): SBD MOMSN=7756631 2018-01-23T20:53:27.189Z,1516740807.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:27.832Z,1516740807.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:27.981Z,1516740807.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:31.069Z,1516740811.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:31.210Z,1516740811.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:31.505Z,1516740811.505 [NAL9602](INFO): NAL9602 initialized 2018-01-23T20:53:31.572Z,1516740811.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:31.941Z,1516740811.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:32.371Z,1516740812.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:32.745Z,1516740812.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:35.832Z,1516740815.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:35.911Z,1516740815.911 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0413.lzma 2018-01-23T20:53:35.985Z,1516740815.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:36.325Z,1516740816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:36.666Z,1516740816.666 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0413.lzma.bak 2018-01-23T20:53:36.666Z,1516740816.666 [DataOverHttps](INFO): SBD MOMSN=7756633 2018-01-23T20:53:36.756Z,1516740816.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:37.645Z,1516740817.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:37.648Z,1516740817.648 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T20:53:37.648Z,1516740817.648 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T20:53:37.648Z,1516740817.648 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T20:53:37.773Z,1516740817.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:40.830Z,1516740820.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:40.832Z,1516740820.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:40.832Z,1516740820.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 351 2018-01-23T20:53:40.832Z,1516740820.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:53:40.844Z,1516740820.844 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:53:40.972Z,1516740820.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:40.997Z,1516740820.997 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:53:40.997Z,1516740820.997 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 351 2018-01-23T20:53:41.306Z,1516740821.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:41.307Z,1516740821.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:53:41.308Z,1516740821.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:53:41.308Z,1516740821.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:53:41.716Z,1516740821.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:42.106Z,1516740822.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:42.498Z,1516740822.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:42.904Z,1516740822.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:43.297Z,1516740823.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:43.705Z,1516740823.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:44.111Z,1516740824.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:44.506Z,1516740824.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:44.898Z,1516740824.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:45.302Z,1516740825.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:45.698Z,1516740825.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:46.099Z,1516740826.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:46.497Z,1516740826.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:46.906Z,1516740826.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:47.309Z,1516740827.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:47.707Z,1516740827.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:48.101Z,1516740828.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:48.509Z,1516740828.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:48.900Z,1516740828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:49.304Z,1516740829.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:49.707Z,1516740829.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:50.110Z,1516740830.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:50.507Z,1516740830.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:50.903Z,1516740830.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:51.307Z,1516740831.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:51.709Z,1516740831.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:52.103Z,1516740832.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:52.499Z,1516740832.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:52.906Z,1516740832.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:53.309Z,1516740833.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:53.715Z,1516740833.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:54.104Z,1516740834.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:54.505Z,1516740834.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:54.904Z,1516740834.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:54.905Z,1516740834.905 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 351 2018-01-23T20:53:54.905Z,1516740834.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:53:54.906Z,1516740834.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:54.907Z,1516740834.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 351 2018-01-23T20:53:54.907Z,1516740834.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:53:54.919Z,1516740834.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:53:54.919Z,1516740834.919 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:53:55.318Z,1516740835.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:53:55.318Z,1516740835.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 351 2018-01-23T20:53:55.319Z,1516740835.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:53:55.319Z,1516740835.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 351 2018-01-23T20:53:55.714Z,1516740835.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:53:55.715Z,1516740835.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:53:55.715Z,1516740835.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:53:55.715Z,1516740835.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:53:55.716Z,1516740835.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:53:55.716Z,1516740835.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:53:56.116Z,1516740836.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:53:56.117Z,1516740836.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:56.515Z,1516740836.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:53:56.516Z,1516740836.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:56.907Z,1516740836.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:53:56.908Z,1516740836.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:57.309Z,1516740837.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:53:57.310Z,1516740837.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:57.707Z,1516740837.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:53:57.708Z,1516740837.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:58.095Z,1516740838.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:53:58.096Z,1516740838.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:58.516Z,1516740838.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:53:58.517Z,1516740838.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:58.915Z,1516740838.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:53:58.916Z,1516740838.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:59.319Z,1516740839.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:53:59.320Z,1516740839.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:53:59.710Z,1516740839.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:53:59.711Z,1516740839.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:00.108Z,1516740840.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:54:00.109Z,1516740840.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:00.492Z,1516740840.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:54:00.493Z,1516740840.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:00.893Z,1516740840.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:54:00.894Z,1516740840.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:01.292Z,1516740841.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:54:01.293Z,1516740841.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:01.702Z,1516740841.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T20:54:01.715Z,1516740841.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:02.127Z,1516740842.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:54:02.128Z,1516740842.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:02.504Z,1516740842.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:54:02.505Z,1516740842.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:02.896Z,1516740842.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:54:02.897Z,1516740842.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:03.300Z,1516740843.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:54:03.301Z,1516740843.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:03.696Z,1516740843.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:54:03.697Z,1516740843.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:04.094Z,1516740844.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:54:04.095Z,1516740844.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:04.500Z,1516740844.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:54:04.501Z,1516740844.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:04.904Z,1516740844.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:54:04.905Z,1516740844.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:05.313Z,1516740845.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:54:05.331Z,1516740845.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:05.705Z,1516740845.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:54:05.706Z,1516740845.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:06.094Z,1516740846.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:54:06.096Z,1516740846.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:06.496Z,1516740846.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:54:06.497Z,1516740846.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:06.897Z,1516740846.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:54:06.898Z,1516740846.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:07.294Z,1516740847.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:54:07.295Z,1516740847.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:07.718Z,1516740847.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:54:07.735Z,1516740847.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:08.109Z,1516740848.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:54:08.110Z,1516740848.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:08.506Z,1516740848.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T20:54:08.511Z,1516740848.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:08.897Z,1516740848.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:54:08.898Z,1516740848.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:09.307Z,1516740849.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:54:09.308Z,1516740849.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:09.701Z,1516740849.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:54:09.702Z,1516740849.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:10.098Z,1516740850.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:54:10.099Z,1516740850.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:10.507Z,1516740850.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:54:10.508Z,1516740850.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:10.906Z,1516740850.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:54:10.907Z,1516740850.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:11.310Z,1516740851.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:54:11.311Z,1516740851.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:11.717Z,1516740851.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:54:11.718Z,1516740851.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:12.097Z,1516740852.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:54:12.098Z,1516740852.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:12.504Z,1516740852.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:54:12.505Z,1516740852.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:12.905Z,1516740852.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:54:12.906Z,1516740852.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:13.292Z,1516740853.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:54:13.293Z,1516740853.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:13.709Z,1516740853.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:54:13.711Z,1516740853.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:14.116Z,1516740854.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:54:14.117Z,1516740854.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:14.517Z,1516740854.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:54:14.518Z,1516740854.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:14.905Z,1516740854.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:15.317Z,1516740855.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:15.709Z,1516740855.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:16.088Z,1516740856.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:16.492Z,1516740856.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:16.902Z,1516740856.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:17.326Z,1516740857.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:17.702Z,1516740857.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:18.095Z,1516740858.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:18.494Z,1516740858.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:18.896Z,1516740858.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:19.297Z,1516740859.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:19.698Z,1516740859.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:20.101Z,1516740860.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:20.498Z,1516740860.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:20.894Z,1516740860.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:21.300Z,1516740861.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:21.702Z,1516740861.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:22.126Z,1516740862.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:22.583Z,1516740862.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:22.898Z,1516740862.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:23.298Z,1516740863.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:23.705Z,1516740863.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:24.109Z,1516740864.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:24.505Z,1516740864.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:24.897Z,1516740864.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:25.299Z,1516740865.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:25.712Z,1516740865.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:26.110Z,1516740866.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:26.508Z,1516740866.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:26.909Z,1516740866.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:27.299Z,1516740867.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:27.706Z,1516740867.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:28.109Z,1516740868.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:28.520Z,1516740868.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:28.900Z,1516740868.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:29.303Z,1516740869.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:29.709Z,1516740869.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:30.110Z,1516740870.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:30.517Z,1516740870.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:30.899Z,1516740870.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:31.297Z,1516740871.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:31.721Z,1516740871.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:32.117Z,1516740872.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:32.510Z,1516740872.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:32.903Z,1516740872.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:33.309Z,1516740873.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:33.721Z,1516740873.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:34.121Z,1516740874.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:34.505Z,1516740874.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:34.900Z,1516740874.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:35.307Z,1516740875.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:35.714Z,1516740875.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:36.109Z,1516740876.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:36.509Z,1516740876.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:36.905Z,1516740876.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:37.297Z,1516740877.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:37.729Z,1516740877.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:38.115Z,1516740878.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:41.204Z,1516740881.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:41.218Z,1516740881.218 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T20:54:41.330Z,1516740881.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:41.678Z,1516740881.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:42.083Z,1516740882.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:42.473Z,1516740882.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:42.909Z,1516740882.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:43.276Z,1516740883.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x4824 got:0x1857 2018-01-23T20:54:43.311Z,1516740883.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:43.684Z,1516740883.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:44.075Z,1516740884.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:44.485Z,1516740884.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:44.878Z,1516740884.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:45.278Z,1516740885.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:45.676Z,1516740885.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:46.098Z,1516740886.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:46.484Z,1516740886.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:46.884Z,1516740886.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:47.276Z,1516740887.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:47.679Z,1516740887.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:48.081Z,1516740888.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:48.474Z,1516740888.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:48.887Z,1516740888.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:49.297Z,1516740889.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:49.681Z,1516740889.681 [PNI_TCM](ERROR): CRC does not match. Expected:0x49201 got:0x6210 2018-01-23T20:54:49.718Z,1516740889.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:50.093Z,1516740890.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:50.472Z,1516740890.472 [PNI_TCM](ERROR): CRC does not match. Expected:0x64250 got:0x16784 2018-01-23T20:54:50.489Z,1516740890.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:50.892Z,1516740890.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:51.280Z,1516740891.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:51.686Z,1516740891.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:52.092Z,1516740892.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:52.516Z,1516740892.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:52.896Z,1516740892.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:53.285Z,1516740893.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:53.681Z,1516740893.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:54.085Z,1516740894.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:54.469Z,1516740894.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:54.887Z,1516740894.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:55.293Z,1516740895.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:55.702Z,1516740895.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:56.087Z,1516740896.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:56.489Z,1516740896.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:56.886Z,1516740896.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:57.276Z,1516740897.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:57.697Z,1516740897.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:58.095Z,1516740898.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:58.493Z,1516740898.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:58.889Z,1516740898.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:59.262Z,1516740899.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:54:59.669Z,1516740899.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:00.101Z,1516740900.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:00.469Z,1516740900.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:00.903Z,1516740900.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:01.304Z,1516740901.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:01.699Z,1516740901.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:02.093Z,1516740902.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:02.473Z,1516740902.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:02.870Z,1516740902.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:03.272Z,1516740903.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:03.673Z,1516740903.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:04.074Z,1516740904.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:04.478Z,1516740904.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:04.886Z,1516740904.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:05.269Z,1516740905.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:05.685Z,1516740905.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:06.072Z,1516740906.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:06.470Z,1516740906.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:06.889Z,1516740906.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:07.281Z,1516740907.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:07.681Z,1516740907.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:08.070Z,1516740908.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:08.471Z,1516740908.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:08.872Z,1516740908.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:09.274Z,1516740909.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:09.682Z,1516740909.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:10.081Z,1516740910.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:10.489Z,1516740910.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:10.894Z,1516740910.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:11.280Z,1516740911.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:11.677Z,1516740911.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:12.077Z,1516740912.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:12.476Z,1516740912.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:12.881Z,1516740912.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:13.292Z,1516740913.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:13.685Z,1516740913.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:14.085Z,1516740914.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:14.486Z,1516740914.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:14.883Z,1516740914.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:15.278Z,1516740915.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:15.686Z,1516740915.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:16.085Z,1516740916.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:16.486Z,1516740916.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:16.883Z,1516740916.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:17.283Z,1516740917.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:17.683Z,1516740917.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:18.080Z,1516740918.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:18.469Z,1516740918.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:18.891Z,1516740918.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:19.299Z,1516740919.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:19.693Z,1516740919.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:20.084Z,1516740920.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:20.484Z,1516740920.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:20.888Z,1516740920.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:21.264Z,1516740921.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:21.668Z,1516740921.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:22.078Z,1516740922.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:22.500Z,1516740922.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:22.902Z,1516740922.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:23.271Z,1516740923.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:23.677Z,1516740923.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:24.078Z,1516740924.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:24.474Z,1516740924.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:24.881Z,1516740924.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:25.282Z,1516740925.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:25.685Z,1516740925.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:26.076Z,1516740926.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:26.479Z,1516740926.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:26.882Z,1516740926.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:27.273Z,1516740927.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:27.685Z,1516740927.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:28.086Z,1516740928.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:28.494Z,1516740928.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:28.887Z,1516740928.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:29.279Z,1516740929.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:29.679Z,1516740929.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:30.081Z,1516740930.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:30.483Z,1516740930.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:30.891Z,1516740930.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:31.293Z,1516740931.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:31.684Z,1516740931.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:32.083Z,1516740932.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:32.486Z,1516740932.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:32.883Z,1516740932.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:33.276Z,1516740933.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:33.686Z,1516740933.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:34.086Z,1516740934.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:34.501Z,1516740934.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:34.905Z,1516740934.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:35.273Z,1516740935.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:35.673Z,1516740935.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:36.072Z,1516740936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:36.471Z,1516740936.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:36.902Z,1516740936.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:37.278Z,1516740937.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:37.675Z,1516740937.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:38.073Z,1516740938.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:38.484Z,1516740938.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:41.581Z,1516740941.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:41.720Z,1516740941.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:42.082Z,1516740942.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:42.514Z,1516740942.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:42.882Z,1516740942.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:43.277Z,1516740943.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:43.679Z,1516740943.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:44.078Z,1516740944.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:44.484Z,1516740944.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:44.894Z,1516740944.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:45.285Z,1516740945.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:45.692Z,1516740945.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:46.084Z,1516740946.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:46.478Z,1516740946.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:46.878Z,1516740946.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:47.281Z,1516740947.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:47.689Z,1516740947.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:48.088Z,1516740948.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:48.489Z,1516740948.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:48.888Z,1516740948.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:49.279Z,1516740949.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:49.680Z,1516740949.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:50.082Z,1516740950.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:50.479Z,1516740950.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:50.891Z,1516740950.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:51.293Z,1516740951.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:51.692Z,1516740951.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:52.081Z,1516740952.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:52.489Z,1516740952.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:52.879Z,1516740952.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:53.281Z,1516740953.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:53.690Z,1516740953.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:54.090Z,1516740954.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:54.493Z,1516740954.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:54.889Z,1516740954.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:55.279Z,1516740955.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:55.681Z,1516740955.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:56.082Z,1516740956.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:56.484Z,1516740956.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:56.894Z,1516740956.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:57.293Z,1516740957.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:57.690Z,1516740957.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:58.082Z,1516740958.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:58.489Z,1516740958.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:58.879Z,1516740958.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:59.282Z,1516740959.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:55:59.682Z,1516740959.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:00.091Z,1516740960.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:00.494Z,1516740960.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:00.889Z,1516740960.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:01.279Z,1516740961.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:01.693Z,1516740961.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:02.081Z,1516740962.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:02.484Z,1516740962.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:02.905Z,1516740962.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:03.295Z,1516740963.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:03.690Z,1516740963.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:04.088Z,1516740964.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:04.491Z,1516740964.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:04.893Z,1516740964.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:05.293Z,1516740965.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:05.692Z,1516740965.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:06.101Z,1516740966.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:06.505Z,1516740966.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:06.898Z,1516740966.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:07.292Z,1516740967.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:07.692Z,1516740967.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:08.089Z,1516740968.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:08.492Z,1516740968.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:08.895Z,1516740968.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:09.294Z,1516740969.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:09.698Z,1516740969.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:10.087Z,1516740970.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:10.493Z,1516740970.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:10.875Z,1516740970.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:11.276Z,1516740971.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:11.701Z,1516740971.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:12.109Z,1516740972.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:12.486Z,1516740972.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:12.886Z,1516740972.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:13.281Z,1516740973.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:13.689Z,1516740973.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:14.080Z,1516740974.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:14.479Z,1516740974.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:14.882Z,1516740974.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:15.286Z,1516740975.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:15.693Z,1516740975.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:16.081Z,1516740976.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:16.480Z,1516740976.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:16.888Z,1516740976.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:17.286Z,1516740977.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:17.685Z,1516740977.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:18.094Z,1516740978.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:18.492Z,1516740978.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:18.897Z,1516740978.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:19.285Z,1516740979.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:19.685Z,1516740979.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:20.083Z,1516740980.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:20.481Z,1516740980.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:20.894Z,1516740980.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:21.301Z,1516740981.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:21.693Z,1516740981.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:22.085Z,1516740982.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:22.481Z,1516740982.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:22.889Z,1516740982.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:23.290Z,1516740983.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:23.699Z,1516740983.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:24.082Z,1516740984.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:24.484Z,1516740984.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:24.890Z,1516740984.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:25.293Z,1516740985.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:25.692Z,1516740985.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:26.090Z,1516740986.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:26.491Z,1516740986.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:26.891Z,1516740986.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:27.293Z,1516740987.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:27.696Z,1516740987.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:28.085Z,1516740988.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:28.487Z,1516740988.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:28.892Z,1516740988.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:29.294Z,1516740989.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:29.701Z,1516740989.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:30.083Z,1516740990.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:30.484Z,1516740990.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:30.890Z,1516740990.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:31.296Z,1516740991.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:31.691Z,1516740991.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:32.088Z,1516740992.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:32.491Z,1516740992.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:32.892Z,1516740992.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:33.293Z,1516740993.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:33.699Z,1516740993.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:34.088Z,1516740994.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:34.481Z,1516740994.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:34.890Z,1516740994.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:35.295Z,1516740995.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:35.691Z,1516740995.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:36.083Z,1516740996.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:36.488Z,1516740996.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:36.896Z,1516740996.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:37.294Z,1516740997.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:37.697Z,1516740997.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:38.086Z,1516740998.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:38.493Z,1516740998.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:41.597Z,1516741001.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:41.599Z,1516741001.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:41.599Z,1516741001.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 352 2018-01-23T20:56:41.599Z,1516741001.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:56:41.611Z,1516741001.611 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:56:41.764Z,1516741001.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:41.793Z,1516741001.793 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:56:41.794Z,1516741001.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 352 2018-01-23T20:56:42.084Z,1516741002.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:42.085Z,1516741002.085 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:56:42.086Z,1516741002.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:56:42.086Z,1516741002.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:56:42.492Z,1516741002.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:42.885Z,1516741002.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:43.264Z,1516741003.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:43.663Z,1516741003.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:44.070Z,1516741004.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:44.470Z,1516741004.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:44.872Z,1516741004.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:45.269Z,1516741005.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:45.669Z,1516741005.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:46.068Z,1516741006.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:46.473Z,1516741006.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:46.873Z,1516741006.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:47.273Z,1516741007.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:47.681Z,1516741007.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:48.069Z,1516741008.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:48.464Z,1516741008.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:48.863Z,1516741008.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:49.273Z,1516741009.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:49.680Z,1516741009.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:50.073Z,1516741010.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:50.469Z,1516741010.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:50.902Z,1516741010.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:51.278Z,1516741011.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:51.709Z,1516741011.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:52.110Z,1516741012.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:52.509Z,1516741012.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:52.914Z,1516741012.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:53.324Z,1516741013.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:53.685Z,1516741013.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:54.094Z,1516741014.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:54.476Z,1516741014.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:54.872Z,1516741014.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:55.306Z,1516741015.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:55.704Z,1516741015.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:56.086Z,1516741016.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:56.086Z,1516741016.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 352 2018-01-23T20:56:56.086Z,1516741016.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:56:56.092Z,1516741016.092 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:56.093Z,1516741016.093 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 352 2018-01-23T20:56:56.093Z,1516741016.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:56:56.130Z,1516741016.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:56:56.130Z,1516741016.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:56:56.548Z,1516741016.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:56:56.548Z,1516741016.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 352 2018-01-23T20:56:56.549Z,1516741016.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:56:56.549Z,1516741016.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 352 2018-01-23T20:56:56.895Z,1516741016.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:56:56.896Z,1516741016.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:56:56.896Z,1516741016.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:56:56.897Z,1516741016.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:56:56.897Z,1516741016.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:56:56.897Z,1516741016.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:56:57.285Z,1516741017.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:56:57.286Z,1516741017.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:57.687Z,1516741017.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:56:57.688Z,1516741017.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:58.140Z,1516741018.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T20:56:58.141Z,1516741018.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:58.484Z,1516741018.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:56:58.485Z,1516741018.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:58.893Z,1516741018.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T20:56:58.893Z,1516741018.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:59.297Z,1516741019.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T20:56:59.298Z,1516741019.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:56:59.701Z,1516741019.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T20:56:59.702Z,1516741019.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:00.114Z,1516741020.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T20:57:00.123Z,1516741020.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:00.476Z,1516741020.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T20:57:00.477Z,1516741020.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:00.881Z,1516741020.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T20:57:00.882Z,1516741020.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:01.289Z,1516741021.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T20:57:01.290Z,1516741021.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:01.725Z,1516741021.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T20:57:01.726Z,1516741021.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:02.096Z,1516741022.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T20:57:02.097Z,1516741022.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:02.486Z,1516741022.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T20:57:02.492Z,1516741022.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:02.938Z,1516741022.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T20:57:02.939Z,1516741022.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:03.300Z,1516741023.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T20:57:03.301Z,1516741023.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:03.701Z,1516741023.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T20:57:03.702Z,1516741023.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:04.108Z,1516741024.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T20:57:04.108Z,1516741024.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:04.472Z,1516741024.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T20:57:04.473Z,1516741024.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:04.873Z,1516741024.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T20:57:04.874Z,1516741024.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:05.288Z,1516741025.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T20:57:05.289Z,1516741025.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:05.681Z,1516741025.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T20:57:05.681Z,1516741025.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:06.089Z,1516741026.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T20:57:06.090Z,1516741026.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:06.521Z,1516741026.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T20:57:06.522Z,1516741026.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:06.893Z,1516741026.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T20:57:06.894Z,1516741026.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:07.278Z,1516741027.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T20:57:07.284Z,1516741027.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:07.721Z,1516741027.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T20:57:07.722Z,1516741027.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:08.085Z,1516741028.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T20:57:08.086Z,1516741028.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:08.501Z,1516741028.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T20:57:08.502Z,1516741028.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:08.906Z,1516741028.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T20:57:08.907Z,1516741028.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:09.272Z,1516741029.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T20:57:09.273Z,1516741029.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:09.755Z,1516741029.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T20:57:09.756Z,1516741029.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:10.117Z,1516741030.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T20:57:10.118Z,1516741030.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:10.479Z,1516741030.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T20:57:10.480Z,1516741030.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:10.881Z,1516741030.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T20:57:10.882Z,1516741030.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:11.290Z,1516741031.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T20:57:11.291Z,1516741031.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:11.700Z,1516741031.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T20:57:11.701Z,1516741031.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:12.098Z,1516741032.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T20:57:12.103Z,1516741032.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:12.503Z,1516741032.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T20:57:12.504Z,1516741032.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:12.877Z,1516741032.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T20:57:12.878Z,1516741032.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:13.269Z,1516741033.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T20:57:13.270Z,1516741033.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:13.704Z,1516741033.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T20:57:13.704Z,1516741033.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:14.088Z,1516741034.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T20:57:14.089Z,1516741034.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:14.481Z,1516741034.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T20:57:14.481Z,1516741034.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:14.860Z,1516741034.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T20:57:14.861Z,1516741034.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:15.282Z,1516741035.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T20:57:15.287Z,1516741035.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:15.683Z,1516741035.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T20:57:15.684Z,1516741035.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:16.088Z,1516741036.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:16.465Z,1516741036.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:16.868Z,1516741036.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:17.265Z,1516741037.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:17.666Z,1516741037.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:18.098Z,1516741038.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:18.505Z,1516741038.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:18.869Z,1516741038.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:19.281Z,1516741039.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:19.677Z,1516741039.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:20.065Z,1516741040.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:20.474Z,1516741040.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:20.873Z,1516741040.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:21.274Z,1516741041.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:21.678Z,1516741041.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:22.074Z,1516741042.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:22.499Z,1516741042.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:22.865Z,1516741042.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:23.268Z,1516741043.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:23.672Z,1516741043.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:24.073Z,1516741044.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:24.484Z,1516741044.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:24.877Z,1516741044.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:25.307Z,1516741045.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:25.681Z,1516741045.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:26.073Z,1516741046.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:26.474Z,1516741046.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:26.877Z,1516741046.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:27.309Z,1516741047.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:27.689Z,1516741047.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:28.087Z,1516741048.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:28.466Z,1516741048.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:28.878Z,1516741048.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:29.277Z,1516741049.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:29.683Z,1516741049.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:30.085Z,1516741050.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:30.490Z,1516741050.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:30.885Z,1516741050.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:31.277Z,1516741051.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:31.659Z,1516741051.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:32.054Z,1516741052.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:32.481Z,1516741052.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:32.861Z,1516741052.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:33.289Z,1516741053.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:33.687Z,1516741053.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:34.096Z,1516741054.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:34.461Z,1516741054.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:34.893Z,1516741054.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:35.260Z,1516741055.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:35.666Z,1516741055.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:36.093Z,1516741056.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:36.493Z,1516741056.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:36.893Z,1516741056.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:37.264Z,1516741057.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:37.664Z,1516741057.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:38.061Z,1516741058.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:38.464Z,1516741058.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:38.868Z,1516741058.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:41.993Z,1516741061.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:42.141Z,1516741062.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:42.469Z,1516741062.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:42.868Z,1516741062.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:43.269Z,1516741063.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:43.669Z,1516741063.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:44.072Z,1516741064.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:44.469Z,1516741064.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:44.866Z,1516741064.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:45.260Z,1516741065.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:45.660Z,1516741065.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:46.059Z,1516741066.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:46.461Z,1516741066.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:46.860Z,1516741066.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:47.269Z,1516741067.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:47.666Z,1516741067.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:48.067Z,1516741068.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:48.464Z,1516741068.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:48.860Z,1516741068.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:49.260Z,1516741069.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:49.660Z,1516741069.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:50.066Z,1516741070.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:50.465Z,1516741070.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:50.865Z,1516741070.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:51.261Z,1516741071.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:51.660Z,1516741071.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:52.060Z,1516741072.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:52.461Z,1516741072.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:52.859Z,1516741072.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:53.295Z,1516741073.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:53.670Z,1516741073.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:54.070Z,1516741074.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:54.467Z,1516741074.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:54.868Z,1516741074.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:55.267Z,1516741075.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:55.673Z,1516741075.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:56.073Z,1516741076.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:56.479Z,1516741076.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:56.873Z,1516741076.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:57.270Z,1516741077.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:57.677Z,1516741077.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:58.065Z,1516741078.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:58.473Z,1516741078.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:58.871Z,1516741078.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:59.277Z,1516741079.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:57:59.682Z,1516741079.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:00.079Z,1516741080.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:00.471Z,1516741080.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:00.874Z,1516741080.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:01.271Z,1516741081.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:01.674Z,1516741081.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:02.086Z,1516741082.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:02.481Z,1516741082.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:02.880Z,1516741082.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:03.271Z,1516741083.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:03.669Z,1516741083.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:04.074Z,1516741084.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:04.470Z,1516741084.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:04.869Z,1516741084.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:05.282Z,1516741085.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:05.688Z,1516741085.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:06.080Z,1516741086.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:06.471Z,1516741086.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:06.873Z,1516741086.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:07.272Z,1516741087.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:07.672Z,1516741087.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:08.079Z,1516741088.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:08.481Z,1516741088.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:08.881Z,1516741088.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:09.274Z,1516741089.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:09.672Z,1516741089.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:10.072Z,1516741090.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:10.478Z,1516741090.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:10.871Z,1516741090.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:11.285Z,1516741091.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:11.676Z,1516741091.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:12.080Z,1516741092.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:12.472Z,1516741092.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:12.872Z,1516741092.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:13.270Z,1516741093.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:13.671Z,1516741093.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:14.082Z,1516741094.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:14.479Z,1516741094.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:14.877Z,1516741094.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:15.273Z,1516741095.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:15.671Z,1516741095.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:16.074Z,1516741096.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:16.488Z,1516741096.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:16.885Z,1516741096.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:17.269Z,1516741097.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:17.681Z,1516741097.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:18.086Z,1516741098.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:18.489Z,1516741098.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:18.885Z,1516741098.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:19.272Z,1516741099.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:19.682Z,1516741099.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:20.088Z,1516741100.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:20.478Z,1516741100.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:20.888Z,1516741100.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:21.251Z,1516741101.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:21.661Z,1516741101.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:22.061Z,1516741102.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:22.457Z,1516741102.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:22.857Z,1516741102.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:23.266Z,1516741103.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:23.670Z,1516741103.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:24.074Z,1516741104.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:24.465Z,1516741104.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:24.860Z,1516741104.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:25.261Z,1516741105.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:25.665Z,1516741105.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:26.078Z,1516741106.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:26.470Z,1516741106.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:26.866Z,1516741106.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:27.264Z,1516741107.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:27.665Z,1516741107.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:28.065Z,1516741108.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:28.465Z,1516741108.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:28.871Z,1516741108.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:29.265Z,1516741109.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:29.676Z,1516741109.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:30.079Z,1516741110.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:30.474Z,1516741110.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:30.877Z,1516741110.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:31.265Z,1516741111.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:31.662Z,1516741111.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:32.073Z,1516741112.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:32.478Z,1516741112.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:32.893Z,1516741112.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:33.268Z,1516741113.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:33.672Z,1516741113.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:34.076Z,1516741114.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:34.486Z,1516741114.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:34.875Z,1516741114.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:35.273Z,1516741115.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:35.676Z,1516741115.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:36.075Z,1516741116.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:36.474Z,1516741116.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:36.883Z,1516741116.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:37.265Z,1516741117.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:37.675Z,1516741117.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:38.089Z,1516741118.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:38.092Z,1516741118.092 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T20:58:38.093Z,1516741118.093 [Default:CheckIn:C.Wait] Stopped 2018-01-23T20:58:38.093Z,1516741118.093 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T20:58:38.093Z,1516741118.093 [Default:CheckIn:D] Running Loop=1 2018-01-23T20:58:38.483Z,1516741118.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:38.486Z,1516741118.486 [Default:CheckIn:D] Stopped 2018-01-23T20:58:38.487Z,1516741118.487 [Default:CheckIn:E] Running Loop=1 2018-01-23T20:58:38.879Z,1516741118.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1060.773763 min 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn:E] Stopped 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn] Stopped 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T20:58:38.883Z,1516741118.883 [Default:CheckIn](INFO): Running loop #104 2018-01-23T20:58:38.884Z,1516741118.884 [Default:CheckIn] Running Loop=104 2018-01-23T20:58:38.884Z,1516741118.884 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T20:58:38.884Z,1516741118.884 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T20:58:39.284Z,1516741119.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:42.378Z,1516741122.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:42.530Z,1516741122.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:42.851Z,1516741122.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:43.277Z,1516741123.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:43.666Z,1516741123.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:44.038Z,1516741124.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x54026 got:0x7618 2018-01-23T20:58:44.072Z,1516741124.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:44.448Z,1516741124.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:44.870Z,1516741124.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:45.276Z,1516741125.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:45.656Z,1516741125.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:46.053Z,1516741126.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:46.476Z,1516741126.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:46.848Z,1516741126.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:47.247Z,1516741127.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:47.649Z,1516741127.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:48.057Z,1516741128.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:48.453Z,1516741128.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:48.853Z,1516741128.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:49.257Z,1516741129.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:49.673Z,1516741129.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:50.045Z,1516741130.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:50.451Z,1516741130.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:50.845Z,1516741130.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:51.284Z,1516741131.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:51.677Z,1516741131.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:52.054Z,1516741132.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:52.446Z,1516741132.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:52.853Z,1516741132.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:53.241Z,1516741133.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:53.649Z,1516741133.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:54.047Z,1516741134.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:54.477Z,1516741134.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:54.852Z,1516741134.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:55.253Z,1516741135.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:55.647Z,1516741135.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:56.043Z,1516741136.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:56.445Z,1516741136.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:56.851Z,1516741136.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:57.251Z,1516741137.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:57.661Z,1516741137.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:58.054Z,1516741138.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:58.456Z,1516741138.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:58.851Z,1516741138.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:59.257Z,1516741139.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:58:59.655Z,1516741139.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:00.056Z,1516741140.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:00.461Z,1516741140.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:00.892Z,1516741140.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:01.269Z,1516741141.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:01.660Z,1516741141.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:02.052Z,1516741142.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:02.449Z,1516741142.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:02.853Z,1516741142.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:03.272Z,1516741143.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:03.673Z,1516741143.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:04.069Z,1516741144.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:04.449Z,1516741144.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:04.849Z,1516741144.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:05.254Z,1516741145.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:05.654Z,1516741145.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:06.053Z,1516741146.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:06.455Z,1516741146.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:06.865Z,1516741146.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:07.273Z,1516741147.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:07.649Z,1516741147.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:08.045Z,1516741148.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:08.460Z,1516741148.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:08.849Z,1516741148.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:09.262Z,1516741149.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:09.673Z,1516741149.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:10.070Z,1516741150.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:10.459Z,1516741150.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:10.857Z,1516741150.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:11.241Z,1516741151.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:11.645Z,1516741151.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:12.041Z,1516741152.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:12.467Z,1516741152.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:12.857Z,1516741152.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:13.251Z,1516741153.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:13.651Z,1516741153.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:14.044Z,1516741154.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:14.449Z,1516741154.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:14.845Z,1516741154.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:15.281Z,1516741155.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:15.658Z,1516741155.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:16.062Z,1516741156.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:16.458Z,1516741156.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:16.856Z,1516741156.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:17.249Z,1516741157.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:17.651Z,1516741157.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:18.058Z,1516741158.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:18.455Z,1516741158.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:18.859Z,1516741158.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:19.258Z,1516741159.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:19.645Z,1516741159.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:20.061Z,1516741160.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:20.449Z,1516741160.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:20.851Z,1516741160.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:21.264Z,1516741161.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:21.660Z,1516741161.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:22.054Z,1516741162.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:22.446Z,1516741162.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:22.859Z,1516741162.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:23.245Z,1516741163.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:23.653Z,1516741163.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:24.058Z,1516741164.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:24.454Z,1516741164.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:24.865Z,1516741164.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:25.261Z,1516741165.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:25.657Z,1516741165.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:26.056Z,1516741166.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:26.462Z,1516741166.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:26.853Z,1516741166.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:27.265Z,1516741167.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:27.673Z,1516741167.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:28.069Z,1516741168.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:28.462Z,1516741168.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:28.867Z,1516741168.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:29.261Z,1516741169.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:29.661Z,1516741169.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:30.065Z,1516741170.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:30.454Z,1516741170.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:30.873Z,1516741170.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:31.272Z,1516741171.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:31.645Z,1516741171.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:32.049Z,1516741172.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:32.444Z,1516741172.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:32.844Z,1516741172.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:33.246Z,1516741173.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:33.650Z,1516741173.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:34.046Z,1516741174.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:34.442Z,1516741174.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:34.844Z,1516741174.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:35.243Z,1516741175.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:35.652Z,1516741175.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:36.043Z,1516741176.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:36.453Z,1516741176.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:36.850Z,1516741176.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:37.249Z,1516741177.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:37.649Z,1516741177.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:38.043Z,1516741178.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:38.444Z,1516741178.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:38.847Z,1516741178.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:39.253Z,1516741179.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:39.653Z,1516741179.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:42.759Z,1516741182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:42.761Z,1516741182.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:42.761Z,1516741182.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 353 2018-01-23T20:59:42.762Z,1516741182.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T20:59:42.798Z,1516741182.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T20:59:42.909Z,1516741182.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:42.941Z,1516741182.941 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T20:59:42.941Z,1516741182.941 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 353 2018-01-23T20:59:43.258Z,1516741183.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:43.264Z,1516741183.264 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T20:59:43.264Z,1516741183.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:59:43.265Z,1516741183.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:59:43.662Z,1516741183.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:44.056Z,1516741184.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:44.468Z,1516741184.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:44.863Z,1516741184.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:45.261Z,1516741185.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:45.656Z,1516741185.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:46.061Z,1516741186.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:46.456Z,1516741186.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:46.856Z,1516741186.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:47.262Z,1516741187.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:47.662Z,1516741187.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:48.069Z,1516741188.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:48.460Z,1516741188.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:48.855Z,1516741188.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:49.260Z,1516741189.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:49.662Z,1516741189.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:50.056Z,1516741190.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:50.465Z,1516741190.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:50.869Z,1516741190.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:51.266Z,1516741191.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:51.662Z,1516741191.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:52.050Z,1516741192.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:52.450Z,1516741192.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:52.853Z,1516741192.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:53.285Z,1516741193.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:53.689Z,1516741193.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:54.081Z,1516741194.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:54.452Z,1516741194.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:54.859Z,1516741194.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:55.261Z,1516741195.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:55.656Z,1516741195.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:56.053Z,1516741196.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:56.460Z,1516741196.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:56.866Z,1516741196.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:57.265Z,1516741197.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:57.265Z,1516741197.265 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 353 2018-01-23T20:59:57.265Z,1516741197.265 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T20:59:57.267Z,1516741197.267 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:57.267Z,1516741197.267 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 353 2018-01-23T20:59:57.267Z,1516741197.267 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T20:59:57.310Z,1516741197.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T20:59:57.310Z,1516741197.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T20:59:57.671Z,1516741197.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T20:59:57.671Z,1516741197.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 353 2018-01-23T20:59:57.672Z,1516741197.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T20:59:57.672Z,1516741197.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 353 2018-01-23T20:59:58.060Z,1516741198.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T20:59:58.060Z,1516741198.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:59:58.060Z,1516741198.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:59:58.061Z,1516741198.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T20:59:58.061Z,1516741198.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T20:59:58.062Z,1516741198.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T20:59:58.447Z,1516741198.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T20:59:58.448Z,1516741198.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:58.847Z,1516741198.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T20:59:58.848Z,1516741198.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:59.294Z,1516741199.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T20:59:59.295Z,1516741199.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T20:59:59.664Z,1516741199.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T20:59:59.665Z,1516741199.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:00.084Z,1516741200.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:00:00.085Z,1516741200.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:00.455Z,1516741200.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:00:00.456Z,1516741200.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:00.855Z,1516741200.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:00:00.856Z,1516741200.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:01.256Z,1516741201.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:00:01.257Z,1516741201.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:01.660Z,1516741201.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:00:01.660Z,1516741201.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:02.054Z,1516741202.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:00:02.056Z,1516741202.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:02.472Z,1516741202.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:00:02.473Z,1516741202.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:02.866Z,1516741202.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:00:02.867Z,1516741202.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:03.268Z,1516741203.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:00:03.269Z,1516741203.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:03.686Z,1516741203.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:00:03.691Z,1516741203.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:04.058Z,1516741204.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:00:04.059Z,1516741204.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:04.456Z,1516741204.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:00:04.457Z,1516741204.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:04.864Z,1516741204.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:00:04.865Z,1516741204.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:05.267Z,1516741205.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T21:00:05.268Z,1516741205.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:05.668Z,1516741205.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T21:00:05.669Z,1516741205.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:06.072Z,1516741206.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T21:00:06.073Z,1516741206.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:06.457Z,1516741206.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T21:00:06.458Z,1516741206.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:06.856Z,1516741206.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T21:00:06.857Z,1516741206.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:07.266Z,1516741207.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T21:00:07.267Z,1516741207.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:07.660Z,1516741207.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T21:00:07.661Z,1516741207.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:08.054Z,1516741208.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:00:08.055Z,1516741208.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:08.465Z,1516741208.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:00:08.466Z,1516741208.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:08.877Z,1516741208.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:00:08.878Z,1516741208.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:09.268Z,1516741209.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T21:00:09.269Z,1516741209.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:09.666Z,1516741209.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T21:00:09.667Z,1516741209.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:10.057Z,1516741210.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:00:10.058Z,1516741210.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:10.457Z,1516741210.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:00:10.458Z,1516741210.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:10.865Z,1516741210.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:00:10.866Z,1516741210.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:11.275Z,1516741211.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T21:00:11.276Z,1516741211.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:11.669Z,1516741211.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T21:00:11.670Z,1516741211.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:12.072Z,1516741212.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T21:00:12.073Z,1516741212.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:12.457Z,1516741212.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T21:00:12.458Z,1516741212.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:12.862Z,1516741212.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T21:00:12.868Z,1516741212.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:13.268Z,1516741213.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:00:13.269Z,1516741213.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:13.668Z,1516741213.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:00:13.669Z,1516741213.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:14.046Z,1516741214.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:00:14.059Z,1516741214.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:14.477Z,1516741214.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:00:14.478Z,1516741214.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:14.878Z,1516741214.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T21:00:14.879Z,1516741214.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:15.260Z,1516741215.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T21:00:15.261Z,1516741215.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:15.726Z,1516741215.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T21:00:15.727Z,1516741215.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:16.052Z,1516741216.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:00:16.053Z,1516741216.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:16.455Z,1516741216.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T21:00:16.456Z,1516741216.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:16.858Z,1516741216.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:00:16.859Z,1516741216.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:17.258Z,1516741217.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T21:00:17.259Z,1516741217.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:17.666Z,1516741217.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:18.057Z,1516741218.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:18.465Z,1516741218.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:18.855Z,1516741218.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:19.269Z,1516741219.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:19.663Z,1516741219.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:20.065Z,1516741220.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:20.460Z,1516741220.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:20.856Z,1516741220.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:21.261Z,1516741221.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:21.661Z,1516741221.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:22.068Z,1516741222.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:22.457Z,1516741222.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:22.860Z,1516741222.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:23.269Z,1516741223.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:23.670Z,1516741223.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:24.066Z,1516741224.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:24.470Z,1516741224.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:24.857Z,1516741224.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:25.266Z,1516741225.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:25.670Z,1516741225.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:26.066Z,1516741226.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:26.458Z,1516741226.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:26.861Z,1516741226.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:27.266Z,1516741227.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:27.676Z,1516741227.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:28.069Z,1516741228.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:28.464Z,1516741228.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:28.866Z,1516741228.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:29.272Z,1516741229.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:29.671Z,1516741229.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:30.075Z,1516741230.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:30.464Z,1516741230.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:30.864Z,1516741230.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:31.278Z,1516741231.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:31.672Z,1516741231.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:32.073Z,1516741232.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:32.460Z,1516741232.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:32.864Z,1516741232.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:33.267Z,1516741233.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:33.672Z,1516741233.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:34.080Z,1516741234.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:34.457Z,1516741234.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:34.864Z,1516741234.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:35.280Z,1516741235.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:35.678Z,1516741235.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:36.066Z,1516741236.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:36.465Z,1516741236.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:36.867Z,1516741236.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:37.262Z,1516741237.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:37.674Z,1516741237.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:38.075Z,1516741238.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:38.460Z,1516741238.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:38.873Z,1516741238.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:39.272Z,1516741239.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:39.680Z,1516741239.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:42.775Z,1516741242.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:42.928Z,1516741242.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:43.242Z,1516741243.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:43.649Z,1516741243.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:44.046Z,1516741244.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:44.448Z,1516741244.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:44.849Z,1516741244.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:45.260Z,1516741245.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:45.646Z,1516741245.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:46.054Z,1516741246.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:46.442Z,1516741246.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:46.848Z,1516741246.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:47.258Z,1516741247.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:47.654Z,1516741247.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:48.051Z,1516741248.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:48.452Z,1516741248.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:48.847Z,1516741248.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:49.249Z,1516741249.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:49.651Z,1516741249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:50.049Z,1516741250.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:50.451Z,1516741250.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:50.851Z,1516741250.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:51.249Z,1516741251.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:51.647Z,1516741251.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:52.051Z,1516741252.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:52.451Z,1516741252.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:52.853Z,1516741252.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:53.259Z,1516741253.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:53.649Z,1516741253.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:54.045Z,1516741254.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:54.448Z,1516741254.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:54.845Z,1516741254.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:55.247Z,1516741255.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:55.661Z,1516741255.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:56.051Z,1516741256.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:56.460Z,1516741256.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:56.848Z,1516741256.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:57.249Z,1516741257.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:57.648Z,1516741257.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:58.045Z,1516741258.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:58.452Z,1516741258.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:58.864Z,1516741258.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:59.251Z,1516741259.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:00:59.642Z,1516741259.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:00.048Z,1516741260.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:00.450Z,1516741260.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:00.842Z,1516741260.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:01.248Z,1516741261.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:01.655Z,1516741261.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:02.052Z,1516741262.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:02.461Z,1516741262.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:02.843Z,1516741262.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:03.248Z,1516741263.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:03.648Z,1516741263.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:04.050Z,1516741264.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:04.452Z,1516741264.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:04.858Z,1516741264.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:05.259Z,1516741265.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:05.649Z,1516741265.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:06.051Z,1516741266.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:06.453Z,1516741266.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:06.853Z,1516741266.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:07.253Z,1516741267.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:07.663Z,1516741267.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:08.063Z,1516741268.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:08.463Z,1516741268.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:08.840Z,1516741268.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:09.237Z,1516741269.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:09.644Z,1516741269.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:10.040Z,1516741270.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:10.442Z,1516741270.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:10.850Z,1516741270.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:11.254Z,1516741271.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:11.641Z,1516741271.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:12.038Z,1516741272.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:12.444Z,1516741272.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:12.841Z,1516741272.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:13.245Z,1516741273.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:13.646Z,1516741273.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:14.049Z,1516741274.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:14.449Z,1516741274.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:14.840Z,1516741274.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:15.238Z,1516741275.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:15.648Z,1516741275.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:16.044Z,1516741276.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:16.450Z,1516741276.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:16.853Z,1516741276.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:17.249Z,1516741277.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:17.644Z,1516741277.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:18.043Z,1516741278.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:18.445Z,1516741278.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:18.845Z,1516741278.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:19.245Z,1516741279.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:19.650Z,1516741279.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:20.049Z,1516741280.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:20.457Z,1516741280.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:20.845Z,1516741280.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:21.245Z,1516741281.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:21.643Z,1516741281.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:22.041Z,1516741282.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:22.452Z,1516741282.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:22.854Z,1516741282.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:23.251Z,1516741283.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:23.643Z,1516741283.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:24.050Z,1516741284.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:24.442Z,1516741284.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:24.841Z,1516741284.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:25.241Z,1516741285.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:25.650Z,1516741285.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:26.049Z,1516741286.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:26.457Z,1516741286.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:26.843Z,1516741286.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:27.245Z,1516741287.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:27.644Z,1516741287.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:28.051Z,1516741288.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:28.451Z,1516741288.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:28.853Z,1516741288.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:29.259Z,1516741289.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:29.649Z,1516741289.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:30.045Z,1516741290.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:30.448Z,1516741290.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:30.846Z,1516741290.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:31.247Z,1516741291.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:31.653Z,1516741291.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:32.054Z,1516741292.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:32.450Z,1516741292.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:32.848Z,1516741292.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:33.237Z,1516741293.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:33.648Z,1516741293.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:34.055Z,1516741294.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:34.459Z,1516741294.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:34.863Z,1516741294.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:35.255Z,1516741295.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:35.653Z,1516741295.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:36.061Z,1516741296.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:36.437Z,1516741296.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:36.861Z,1516741296.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:37.240Z,1516741297.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:37.646Z,1516741297.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:38.042Z,1516741298.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:38.446Z,1516741298.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:38.848Z,1516741298.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:39.237Z,1516741299.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:39.647Z,1516741299.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:40.042Z,1516741300.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:43.141Z,1516741303.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:43.301Z,1516741303.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:43.638Z,1516741303.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:44.038Z,1516741304.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:44.422Z,1516741304.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:44.829Z,1516741304.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:45.217Z,1516741305.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:45.637Z,1516741305.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:46.048Z,1516741306.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:46.441Z,1516741306.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:46.815Z,1516741306.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:47.221Z,1516741307.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:47.624Z,1516741307.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:48.016Z,1516741308.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:48.448Z,1516741308.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:48.852Z,1516741308.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:49.230Z,1516741309.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:49.625Z,1516741309.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:50.062Z,1516741310.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:50.422Z,1516741310.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:50.865Z,1516741310.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:51.273Z,1516741311.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:51.640Z,1516741311.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:52.077Z,1516741312.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:52.485Z,1516741312.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:52.838Z,1516741312.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:53.237Z,1516741313.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:53.641Z,1516741313.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:54.033Z,1516741314.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:54.436Z,1516741314.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:54.858Z,1516741314.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:55.306Z,1516741315.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:55.645Z,1516741315.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:56.077Z,1516741316.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:56.446Z,1516741316.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:56.852Z,1516741316.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:57.281Z,1516741317.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:57.675Z,1516741317.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:58.075Z,1516741318.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:58.459Z,1516741318.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:58.855Z,1516741318.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:59.234Z,1516741319.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:01:59.662Z,1516741319.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:00.034Z,1516741320.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:00.465Z,1516741320.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:00.876Z,1516741320.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:01.278Z,1516741321.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:01.650Z,1516741321.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:02.083Z,1516741322.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:02.446Z,1516741322.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:02.841Z,1516741322.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:03.254Z,1516741323.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:03.645Z,1516741323.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:04.068Z,1516741324.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:04.491Z,1516741324.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:04.861Z,1516741324.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:05.257Z,1516741325.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:05.681Z,1516741325.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:06.055Z,1516741326.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:06.467Z,1516741326.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:06.864Z,1516741326.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:07.233Z,1516741327.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:07.633Z,1516741327.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:08.072Z,1516741328.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:08.429Z,1516741328.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:08.834Z,1516741328.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:09.266Z,1516741329.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:09.649Z,1516741329.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:10.051Z,1516741330.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:10.504Z,1516741330.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:10.854Z,1516741330.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:11.249Z,1516741331.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:11.637Z,1516741331.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:12.013Z,1516741332.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:12.436Z,1516741332.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:12.849Z,1516741332.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:13.243Z,1516741333.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:13.637Z,1516741333.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:14.019Z,1516741334.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:14.438Z,1516741334.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:14.845Z,1516741334.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:15.251Z,1516741335.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:15.653Z,1516741335.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:16.022Z,1516741336.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:16.449Z,1516741336.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:16.846Z,1516741336.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:17.243Z,1516741337.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:17.626Z,1516741337.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:18.025Z,1516741338.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:18.454Z,1516741338.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:18.838Z,1516741338.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:19.237Z,1516741339.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:19.629Z,1516741339.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:20.029Z,1516741340.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:20.430Z,1516741340.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:20.842Z,1516741340.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:21.234Z,1516741341.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:21.630Z,1516741341.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:22.025Z,1516741342.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:22.441Z,1516741342.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:22.841Z,1516741342.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:23.240Z,1516741343.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:23.634Z,1516741343.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:24.023Z,1516741344.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:24.441Z,1516741344.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:24.839Z,1516741344.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:25.234Z,1516741345.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:25.625Z,1516741345.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:26.039Z,1516741346.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:26.437Z,1516741346.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:26.838Z,1516741346.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:27.235Z,1516741347.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:27.627Z,1516741347.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:28.036Z,1516741348.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:28.442Z,1516741348.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:28.837Z,1516741348.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:29.234Z,1516741349.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:29.637Z,1516741349.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:30.031Z,1516741350.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:30.434Z,1516741350.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:30.851Z,1516741350.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:31.237Z,1516741351.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:31.632Z,1516741351.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:32.037Z,1516741352.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:32.439Z,1516741352.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:32.842Z,1516741352.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:33.246Z,1516741353.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:33.630Z,1516741353.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:34.037Z,1516741354.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:34.569Z,1516741354.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:34.845Z,1516741354.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:35.243Z,1516741355.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:35.631Z,1516741355.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:36.025Z,1516741356.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:36.450Z,1516741356.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:36.834Z,1516741356.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:37.278Z,1516741357.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:37.645Z,1516741357.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:38.026Z,1516741358.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:38.454Z,1516741358.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:38.857Z,1516741358.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:39.229Z,1516741359.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:39.629Z,1516741359.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:40.037Z,1516741360.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:40.431Z,1516741360.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:43.613Z,1516741363.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:43.617Z,1516741363.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:43.617Z,1516741363.617 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 354 2018-01-23T21:02:43.617Z,1516741363.617 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:02:43.632Z,1516741363.632 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:02:43.758Z,1516741363.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:43.782Z,1516741363.782 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:02:43.787Z,1516741363.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 354 2018-01-23T21:02:44.083Z,1516741364.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:44.084Z,1516741364.084 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:02:44.085Z,1516741364.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:02:44.085Z,1516741364.085 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:02:44.489Z,1516741364.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:44.886Z,1516741364.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:45.285Z,1516741365.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:45.687Z,1516741365.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:46.087Z,1516741366.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:46.487Z,1516741366.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:46.882Z,1516741366.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:47.281Z,1516741367.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:47.684Z,1516741367.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:48.082Z,1516741368.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:48.486Z,1516741368.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:48.890Z,1516741368.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:49.292Z,1516741369.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:49.685Z,1516741369.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:50.084Z,1516741370.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:50.492Z,1516741370.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:50.914Z,1516741370.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:51.286Z,1516741371.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:51.688Z,1516741371.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:52.080Z,1516741372.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:52.514Z,1516741372.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:52.889Z,1516741372.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:53.290Z,1516741373.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:53.685Z,1516741373.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:54.084Z,1516741374.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:54.486Z,1516741374.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:54.913Z,1516741374.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:55.292Z,1516741375.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:55.693Z,1516741375.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:56.089Z,1516741376.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:56.511Z,1516741376.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:56.886Z,1516741376.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:57.286Z,1516741377.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:57.684Z,1516741377.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:58.084Z,1516741378.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:58.085Z,1516741378.085 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 354 2018-01-23T21:02:58.085Z,1516741378.085 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:02:58.086Z,1516741378.086 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:58.087Z,1516741378.087 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 354 2018-01-23T21:02:58.087Z,1516741378.087 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:02:58.111Z,1516741378.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:02:58.111Z,1516741378.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:02:58.525Z,1516741378.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:02:58.525Z,1516741378.525 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 354 2018-01-23T21:02:58.526Z,1516741378.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:02:58.526Z,1516741378.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 354 2018-01-23T21:02:58.888Z,1516741378.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:02:58.889Z,1516741378.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:02:58.889Z,1516741378.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:02:58.890Z,1516741378.890 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:02:58.890Z,1516741378.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:02:58.890Z,1516741378.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:02:59.296Z,1516741379.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:02:59.297Z,1516741379.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:02:59.689Z,1516741379.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:02:59.690Z,1516741379.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:00.091Z,1516741380.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:03:00.092Z,1516741380.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:00.500Z,1516741380.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:03:00.501Z,1516741380.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:00.897Z,1516741380.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:03:00.898Z,1516741380.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:01.304Z,1516741381.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:03:01.305Z,1516741381.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:01.689Z,1516741381.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:03:01.690Z,1516741381.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:02.096Z,1516741382.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:03:02.097Z,1516741382.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:02.494Z,1516741382.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:03:02.495Z,1516741382.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:02.904Z,1516741382.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:03:02.905Z,1516741382.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:03.301Z,1516741383.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:03:03.302Z,1516741383.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:03.688Z,1516741383.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:03:03.689Z,1516741383.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:04.085Z,1516741384.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:03:04.086Z,1516741384.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:04.493Z,1516741384.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:03:04.493Z,1516741384.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:04.909Z,1516741384.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:03:04.910Z,1516741384.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:05.304Z,1516741385.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:03:05.305Z,1516741385.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:05.692Z,1516741385.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:03:05.693Z,1516741385.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:06.096Z,1516741386.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T21:03:06.097Z,1516741386.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:06.499Z,1516741386.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T21:03:06.500Z,1516741386.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:06.908Z,1516741386.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T21:03:06.909Z,1516741386.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:07.300Z,1516741387.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T21:03:07.301Z,1516741387.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:07.697Z,1516741387.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T21:03:07.698Z,1516741387.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:08.092Z,1516741388.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T21:03:08.093Z,1516741388.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:08.512Z,1516741388.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T21:03:08.513Z,1516741388.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:08.900Z,1516741388.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:03:08.901Z,1516741388.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:09.300Z,1516741389.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:03:09.301Z,1516741389.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:09.696Z,1516741389.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:03:09.697Z,1516741389.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:10.096Z,1516741390.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T21:03:10.097Z,1516741390.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:10.502Z,1516741390.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T21:03:10.503Z,1516741390.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:10.912Z,1516741390.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:03:10.913Z,1516741390.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:11.302Z,1516741391.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:03:11.304Z,1516741391.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:11.685Z,1516741391.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:03:11.686Z,1516741391.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:12.087Z,1516741392.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T21:03:12.088Z,1516741392.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:12.492Z,1516741392.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T21:03:12.493Z,1516741392.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:12.890Z,1516741392.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T21:03:12.891Z,1516741392.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:13.316Z,1516741393.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T21:03:13.317Z,1516741393.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:13.688Z,1516741393.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T21:03:13.689Z,1516741393.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:14.085Z,1516741394.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:03:14.086Z,1516741394.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:14.500Z,1516741394.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:03:14.501Z,1516741394.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:14.897Z,1516741394.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:03:14.898Z,1516741394.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:15.298Z,1516741395.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:03:15.299Z,1516741395.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:15.698Z,1516741395.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T21:03:15.699Z,1516741395.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:16.087Z,1516741396.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T21:03:16.088Z,1516741396.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:16.497Z,1516741396.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T21:03:16.498Z,1516741396.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:16.902Z,1516741396.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:03:16.903Z,1516741396.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:17.304Z,1516741397.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T21:03:17.305Z,1516741397.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:17.687Z,1516741397.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:03:17.688Z,1516741397.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:18.092Z,1516741398.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:18.497Z,1516741398.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:18.902Z,1516741398.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:19.297Z,1516741399.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:19.696Z,1516741399.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:20.093Z,1516741400.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:20.503Z,1516741400.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:20.908Z,1516741400.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:21.302Z,1516741401.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:21.697Z,1516741401.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:22.101Z,1516741402.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:22.491Z,1516741402.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41 2018-01-23T21:03:22.517Z,1516741402.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:22.914Z,1516741402.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:23.302Z,1516741403.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:23.706Z,1516741403.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:24.106Z,1516741404.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:24.498Z,1516741404.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:24.908Z,1516741404.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:25.305Z,1516741405.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:25.701Z,1516741405.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:26.078Z,1516741406.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.378213 seconds old. 2018-01-23T21:03:26.095Z,1516741406.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:26.096Z,1516741406.096 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394762 seconds old. 2018-01-23T21:03:26.097Z,1516741406.097 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395136 seconds old. 2018-01-23T21:03:26.481Z,1516741406.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.780813 seconds old. 2018-01-23T21:03:26.482Z,1516741406.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:26.503Z,1516741406.503 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.781142 seconds old. 2018-01-23T21:03:26.505Z,1516741406.505 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802472 seconds old. 2018-01-23T21:03:26.906Z,1516741406.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.205604 seconds old. 2018-01-23T21:03:26.907Z,1516741406.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:26.908Z,1516741406.908 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.206753 seconds old. 2018-01-23T21:03:26.909Z,1516741406.909 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207120 seconds old. 2018-01-23T21:03:27.316Z,1516741407.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.616250 seconds old. 2018-01-23T21:03:27.317Z,1516741407.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:27.318Z,1516741407.318 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.616590 seconds old. 2018-01-23T21:03:27.319Z,1516741407.319 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.617152 seconds old. 2018-01-23T21:03:27.709Z,1516741407.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.009050 seconds old. 2018-01-23T21:03:27.710Z,1516741407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:27.711Z,1516741407.711 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.009438 seconds old. 2018-01-23T21:03:27.712Z,1516741407.712 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.009806 seconds old. 2018-01-23T21:03:28.080Z,1516741408.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.379816 seconds old. 2018-01-23T21:03:28.081Z,1516741408.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:28.082Z,1516741408.082 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.380141 seconds old. 2018-01-23T21:03:28.083Z,1516741408.083 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.380480 seconds old. 2018-01-23T21:03:28.515Z,1516741408.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.814638 seconds old. 2018-01-23T21:03:28.516Z,1516741408.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:28.517Z,1516741408.517 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.815199 seconds old. 2018-01-23T21:03:28.518Z,1516741408.518 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.815550 seconds old. 2018-01-23T21:03:28.919Z,1516741408.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:29.309Z,1516741409.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:29.710Z,1516741409.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:30.115Z,1516741410.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:30.509Z,1516741410.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:30.889Z,1516741410.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:31.281Z,1516741411.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:31.712Z,1516741411.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:32.108Z,1516741412.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:32.488Z,1516741412.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:32.844Z,1516741412.844 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T21:03:32.844Z,1516741412.844 [NAL9602] Data Fault, FailCount= 2 2018-01-23T21:03:32.844Z,1516741412.844 [NAL9602](ERROR): Data Fault 2018-01-23T21:03:32.889Z,1516741412.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:32.914Z,1516741412.914 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T21:03:33.244Z,1516741413.244 [NAL9602](INFO): Powering down 2018-01-23T21:03:33.296Z,1516741413.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:33.690Z,1516741413.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:34.090Z,1516741414.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:34.119Z,1516741414.119 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T21:03:34.119Z,1516741414.119 [NAL9602] No Fault, FailCount= 2 2018-01-23T21:03:34.492Z,1516741414.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:34.901Z,1516741414.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:35.289Z,1516741415.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:35.686Z,1516741415.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:36.084Z,1516741416.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:36.516Z,1516741416.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:36.894Z,1516741416.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:37.284Z,1516741417.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:37.690Z,1516741417.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:38.093Z,1516741418.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:38.480Z,1516741418.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:38.887Z,1516741418.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:38.891Z,1516741418.891 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T20:58:38.9Z 2018-01-23T21:03:38.891Z,1516741418.891 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T21:03:38.891Z,1516741418.891 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T21:03:39.288Z,1516741419.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:39.811Z,1516741419.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:40.109Z,1516741420.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:43.182Z,1516741423.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:43.270Z,1516741423.270 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0416.lzma 2018-01-23T21:03:43.340Z,1516741423.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:43.665Z,1516741423.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:44.006Z,1516741424.006 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0416.lzma.bak 2018-01-23T21:03:44.006Z,1516741424.006 [DataOverHttps](INFO): SBD MOMSN=7756643 2018-01-23T21:03:44.058Z,1516741424.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:44.833Z,1516741424.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:44.950Z,1516741424.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:47.998Z,1516741427.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:48.140Z,1516741428.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:48.488Z,1516741428.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:48.896Z,1516741428.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:49.254Z,1516741429.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:49.688Z,1516741429.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:52.863Z,1516741432.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:52.941Z,1516741432.941 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180123T031358/Express0417.lzma 2018-01-23T21:03:52.995Z,1516741432.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:53.432Z,1516741433.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:57.108Z,1516741437.108 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0417.lzma.bak 2018-01-23T21:03:57.109Z,1516741437.109 [DataOverHttps](INFO): SBD MOMSN=7756645 2018-01-23T21:03:57.188Z,1516741437.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:57.541Z,1516741437.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:03:57.544Z,1516741437.544 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T21:03:57.544Z,1516741437.544 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T21:03:57.545Z,1516741437.545 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T21:03:57.688Z,1516741437.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:00.760Z,1516741440.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:00.888Z,1516741440.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:01.260Z,1516741441.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:01.655Z,1516741441.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:02.054Z,1516741442.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:02.454Z,1516741442.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:02.853Z,1516741442.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:03.253Z,1516741443.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:03.628Z,1516741443.628 [NAL9602](INFO): Powering up NAL9602 2018-01-23T21:04:03.660Z,1516741443.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:04.053Z,1516741444.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:04.454Z,1516741444.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:04.862Z,1516741444.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:05.260Z,1516741445.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:05.656Z,1516741445.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:06.062Z,1516741446.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:06.454Z,1516741446.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:06.855Z,1516741446.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:07.254Z,1516741447.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:07.655Z,1516741447.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:08.059Z,1516741448.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:08.461Z,1516741448.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:08.858Z,1516741448.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:09.259Z,1516741449.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:09.675Z,1516741449.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:10.052Z,1516741450.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:10.455Z,1516741450.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:10.855Z,1516741450.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:11.252Z,1516741451.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:11.656Z,1516741451.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:12.055Z,1516741452.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:12.456Z,1516741452.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:12.860Z,1516741452.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:13.260Z,1516741453.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:13.659Z,1516741453.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:14.058Z,1516741454.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:14.468Z,1516741454.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:14.820Z,1516741454.820 [NAL9602](INFO): NAL9602 initialized 2018-01-23T21:04:14.865Z,1516741454.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:15.256Z,1516741455.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:15.672Z,1516741455.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:16.070Z,1516741456.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:16.473Z,1516741456.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:16.860Z,1516741456.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:17.262Z,1516741457.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:17.658Z,1516741457.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:18.072Z,1516741458.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:18.469Z,1516741458.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:18.870Z,1516741458.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:19.274Z,1516741459.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:19.663Z,1516741459.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:20.063Z,1516741460.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:20.468Z,1516741460.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:20.860Z,1516741460.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:21.268Z,1516741461.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:21.678Z,1516741461.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:22.081Z,1516741462.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:22.474Z,1516741462.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:22.873Z,1516741462.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:23.246Z,1516741463.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:23.677Z,1516741463.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:24.056Z,1516741464.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:24.459Z,1516741464.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:24.879Z,1516741464.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:25.292Z,1516741465.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:25.658Z,1516741465.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:26.061Z,1516741466.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:26.456Z,1516741466.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:26.856Z,1516741466.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:27.255Z,1516741467.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:27.691Z,1516741467.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:28.075Z,1516741468.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:28.465Z,1516741468.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:28.858Z,1516741468.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:29.261Z,1516741469.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:29.666Z,1516741469.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:30.058Z,1516741470.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:30.465Z,1516741470.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:30.873Z,1516741470.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:31.266Z,1516741471.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:31.669Z,1516741471.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:32.065Z,1516741472.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:32.465Z,1516741472.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:32.869Z,1516741472.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:33.267Z,1516741473.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:33.675Z,1516741473.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:34.075Z,1516741474.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:34.471Z,1516741474.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:34.869Z,1516741474.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:35.271Z,1516741475.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:35.661Z,1516741475.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:36.069Z,1516741476.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:36.476Z,1516741476.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:36.869Z,1516741476.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:37.271Z,1516741477.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:37.668Z,1516741477.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:38.064Z,1516741478.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:38.465Z,1516741478.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:38.866Z,1516741478.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:39.263Z,1516741479.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:39.669Z,1516741479.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:40.076Z,1516741480.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:40.467Z,1516741480.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:40.855Z,1516741480.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:41.269Z,1516741481.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:41.299Z,1516741481.299 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T21:04:41.648Z,1516741481.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:42.070Z,1516741482.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:42.474Z,1516741482.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:42.874Z,1516741482.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:43.285Z,1516741483.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:43.653Z,1516741483.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:44.051Z,1516741484.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:44.481Z,1516741484.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:44.855Z,1516741484.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:45.254Z,1516741485.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:45.662Z,1516741485.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:46.086Z,1516741486.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:46.470Z,1516741486.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:46.865Z,1516741486.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:47.261Z,1516741487.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:47.657Z,1516741487.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:48.061Z,1516741488.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:48.462Z,1516741488.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:48.862Z,1516741488.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:49.262Z,1516741489.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:49.656Z,1516741489.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:50.055Z,1516741490.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:50.461Z,1516741490.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:50.856Z,1516741490.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:51.261Z,1516741491.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:51.662Z,1516741491.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:52.063Z,1516741492.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:52.461Z,1516741492.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:52.857Z,1516741492.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:53.260Z,1516741493.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:53.657Z,1516741493.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:54.056Z,1516741494.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:54.463Z,1516741494.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:54.862Z,1516741494.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:55.269Z,1516741495.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:55.660Z,1516741495.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:56.054Z,1516741496.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:56.458Z,1516741496.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:56.856Z,1516741496.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:57.256Z,1516741497.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:57.661Z,1516741497.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:04:58.062Z,1516741498.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:01.163Z,1516741501.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:01.293Z,1516741501.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:01.656Z,1516741501.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:02.058Z,1516741502.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:02.457Z,1516741502.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:02.861Z,1516741502.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:03.255Z,1516741503.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:03.652Z,1516741503.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:04.052Z,1516741504.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:04.459Z,1516741504.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:04.851Z,1516741504.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:05.261Z,1516741505.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:05.657Z,1516741505.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:06.069Z,1516741506.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:06.457Z,1516741506.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:06.853Z,1516741506.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:07.253Z,1516741507.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:07.656Z,1516741507.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:08.034Z,1516741508.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:08.456Z,1516741508.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:08.868Z,1516741508.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:09.261Z,1516741509.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:09.659Z,1516741509.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:10.057Z,1516741510.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:10.439Z,1516741510.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:10.844Z,1516741510.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:11.240Z,1516741511.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:11.668Z,1516741511.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:12.070Z,1516741512.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:12.474Z,1516741512.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:12.841Z,1516741512.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:13.241Z,1516741513.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:13.649Z,1516741513.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:14.044Z,1516741514.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:14.447Z,1516741514.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:14.873Z,1516741514.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:15.282Z,1516741515.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:15.649Z,1516741515.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:16.049Z,1516741516.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:16.448Z,1516741516.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:16.844Z,1516741516.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:17.249Z,1516741517.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:17.650Z,1516741517.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:18.053Z,1516741518.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:18.450Z,1516741518.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:18.844Z,1516741518.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:19.243Z,1516741519.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:19.652Z,1516741519.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:20.043Z,1516741520.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:20.461Z,1516741520.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:20.857Z,1516741520.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:21.253Z,1516741521.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:21.643Z,1516741521.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:22.046Z,1516741522.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:22.445Z,1516741522.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:22.846Z,1516741522.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:23.245Z,1516741523.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:23.654Z,1516741523.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:24.053Z,1516741524.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:24.461Z,1516741524.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:24.855Z,1516741524.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:25.253Z,1516741525.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:25.650Z,1516741525.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:26.049Z,1516741526.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:26.456Z,1516741526.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:26.862Z,1516741526.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:27.267Z,1516741527.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:27.647Z,1516741527.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:28.052Z,1516741528.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:28.458Z,1516741528.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:28.859Z,1516741528.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:29.255Z,1516741529.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:29.677Z,1516741529.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:30.049Z,1516741530.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:30.465Z,1516741530.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:30.859Z,1516741530.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:31.265Z,1516741531.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:31.652Z,1516741531.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:32.061Z,1516741532.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:32.459Z,1516741532.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:32.858Z,1516741532.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:33.265Z,1516741533.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:33.655Z,1516741533.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:34.055Z,1516741534.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:34.468Z,1516741534.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:34.870Z,1516741534.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:35.274Z,1516741535.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:35.656Z,1516741535.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:36.043Z,1516741536.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:36.453Z,1516741536.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:36.849Z,1516741536.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:37.253Z,1516741537.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:37.653Z,1516741537.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:38.048Z,1516741538.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:38.453Z,1516741538.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:38.854Z,1516741538.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:39.256Z,1516741539.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:39.649Z,1516741539.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:40.044Z,1516741540.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:40.456Z,1516741540.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:40.854Z,1516741540.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:41.251Z,1516741541.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:41.649Z,1516741541.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:42.042Z,1516741542.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:42.450Z,1516741542.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:42.850Z,1516741542.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:43.249Z,1516741543.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:43.646Z,1516741543.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:44.043Z,1516741544.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:44.453Z,1516741544.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:44.456Z,1516741544.456 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:44.456Z,1516741544.456 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 355 2018-01-23T21:05:44.456Z,1516741544.456 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:05:44.496Z,1516741544.496 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:05:44.857Z,1516741544.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:44.890Z,1516741544.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:05:44.890Z,1516741544.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 355 2018-01-23T21:05:45.254Z,1516741545.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:45.256Z,1516741545.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:05:45.256Z,1516741545.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:05:45.256Z,1516741545.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:05:45.646Z,1516741545.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:46.044Z,1516741546.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:46.454Z,1516741546.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:46.861Z,1516741546.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:47.261Z,1516741547.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:47.649Z,1516741547.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:48.043Z,1516741548.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:48.453Z,1516741548.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:48.856Z,1516741548.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:49.261Z,1516741549.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:49.648Z,1516741549.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:50.056Z,1516741550.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:50.458Z,1516741550.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:50.869Z,1516741550.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:51.258Z,1516741551.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:51.653Z,1516741551.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:52.050Z,1516741552.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:52.459Z,1516741552.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:52.869Z,1516741552.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:53.258Z,1516741553.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:53.649Z,1516741553.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:54.034Z,1516741554.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:54.456Z,1516741554.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:54.865Z,1516741554.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:55.258Z,1516741555.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:55.667Z,1516741555.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:56.040Z,1516741556.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:56.466Z,1516741556.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:56.868Z,1516741556.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:57.270Z,1516741557.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:57.644Z,1516741557.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:58.043Z,1516741558.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:05:58.451Z,1516741558.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:01.549Z,1516741561.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:01.549Z,1516741561.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 355 2018-01-23T21:06:01.549Z,1516741561.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:06:01.551Z,1516741561.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:01.551Z,1516741561.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 355 2018-01-23T21:06:01.551Z,1516741561.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:06:01.588Z,1516741561.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:06:01.588Z,1516741561.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:06:01.752Z,1516741561.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:06:01.752Z,1516741561.752 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 355 2018-01-23T21:06:01.752Z,1516741561.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:06:01.752Z,1516741561.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 355 2018-01-23T21:06:02.045Z,1516741562.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:06:02.045Z,1516741562.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:06:02.045Z,1516741562.045 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:06:02.046Z,1516741562.046 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:06:02.046Z,1516741562.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:06:02.046Z,1516741562.046 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:06:02.452Z,1516741562.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T21:06:02.453Z,1516741562.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:02.847Z,1516741562.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T21:06:02.848Z,1516741562.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:03.252Z,1516741563.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T21:06:03.253Z,1516741563.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:03.651Z,1516741563.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T21:06:03.652Z,1516741563.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:04.053Z,1516741564.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T21:06:04.054Z,1516741564.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:04.464Z,1516741564.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T21:06:04.465Z,1516741564.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:04.852Z,1516741564.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T21:06:04.853Z,1516741564.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:05.230Z,1516741565.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T21:06:05.247Z,1516741565.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:05.652Z,1516741565.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T21:06:05.653Z,1516741565.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:06.032Z,1516741566.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T21:06:06.033Z,1516741566.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:06.436Z,1516741566.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T21:06:06.437Z,1516741566.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:06.860Z,1516741566.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T21:06:06.861Z,1516741566.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:07.265Z,1516741567.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T21:06:07.266Z,1516741567.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:07.662Z,1516741567.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T21:06:07.663Z,1516741567.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:08.062Z,1516741568.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T21:06:08.063Z,1516741568.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:08.463Z,1516741568.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T21:06:08.464Z,1516741568.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:08.860Z,1516741568.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T21:06:08.861Z,1516741568.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:09.236Z,1516741569.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T21:06:09.237Z,1516741569.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:09.667Z,1516741569.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T21:06:09.668Z,1516741569.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:10.066Z,1516741570.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T21:06:10.067Z,1516741570.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:10.468Z,1516741570.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T21:06:10.469Z,1516741570.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:10.870Z,1516741570.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T21:06:10.871Z,1516741570.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:11.235Z,1516741571.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T21:06:11.236Z,1516741571.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:11.643Z,1516741571.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T21:06:11.644Z,1516741571.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:12.039Z,1516741572.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T21:06:12.040Z,1516741572.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:12.438Z,1516741572.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T21:06:12.439Z,1516741572.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:12.846Z,1516741572.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T21:06:12.847Z,1516741572.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:13.254Z,1516741573.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T21:06:13.271Z,1516741573.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:13.646Z,1516741573.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T21:06:13.647Z,1516741573.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:14.039Z,1516741574.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T21:06:14.040Z,1516741574.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:14.439Z,1516741574.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T21:06:14.440Z,1516741574.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:14.839Z,1516741574.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T21:06:14.840Z,1516741574.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:15.248Z,1516741575.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T21:06:15.249Z,1516741575.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:15.673Z,1516741575.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T21:06:15.674Z,1516741575.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:16.048Z,1516741576.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T21:06:16.049Z,1516741576.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:16.449Z,1516741576.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T21:06:16.450Z,1516741576.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:16.839Z,1516741576.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T21:06:16.840Z,1516741576.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:17.238Z,1516741577.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T21:06:17.240Z,1516741577.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:17.647Z,1516741577.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T21:06:17.648Z,1516741577.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:18.044Z,1516741578.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T21:06:18.045Z,1516741578.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:18.439Z,1516741578.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T21:06:18.440Z,1516741578.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:18.848Z,1516741578.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T21:06:18.849Z,1516741578.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:19.254Z,1516741579.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T21:06:19.255Z,1516741579.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:19.654Z,1516741579.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T21:06:19.659Z,1516741579.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:20.048Z,1516741580.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T21:06:20.048Z,1516741580.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:20.456Z,1516741580.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T21:06:20.457Z,1516741580.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:20.850Z,1516741580.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T21:06:20.852Z,1516741580.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:21.248Z,1516741581.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T21:06:21.249Z,1516741581.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:21.656Z,1516741581.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:22.056Z,1516741582.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:22.461Z,1516741582.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:22.854Z,1516741582.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:23.248Z,1516741583.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:23.657Z,1516741583.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:24.032Z,1516741584.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:24.431Z,1516741584.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:24.869Z,1516741584.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:25.261Z,1516741585.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:25.658Z,1516741585.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:26.062Z,1516741586.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:26.441Z,1516741586.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:26.836Z,1516741586.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:27.265Z,1516741587.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:27.647Z,1516741587.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:28.046Z,1516741588.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:28.442Z,1516741588.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:28.845Z,1516741588.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:29.240Z,1516741589.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:29.646Z,1516741589.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:30.044Z,1516741590.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:30.448Z,1516741590.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:30.858Z,1516741590.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:31.255Z,1516741591.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:31.651Z,1516741591.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:32.043Z,1516741592.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:32.453Z,1516741592.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:32.848Z,1516741592.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:33.252Z,1516741593.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:33.655Z,1516741593.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:34.055Z,1516741594.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:34.453Z,1516741594.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:34.850Z,1516741594.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:35.247Z,1516741595.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:35.630Z,1516741595.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:36.032Z,1516741596.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:36.431Z,1516741596.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:36.863Z,1516741596.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:37.258Z,1516741597.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:37.663Z,1516741597.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:38.061Z,1516741598.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:38.436Z,1516741598.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:38.844Z,1516741598.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:39.248Z,1516741599.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:39.670Z,1516741599.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:40.050Z,1516741600.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:40.448Z,1516741600.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:40.840Z,1516741600.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:41.239Z,1516741601.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:41.645Z,1516741601.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:42.044Z,1516741602.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:42.442Z,1516741602.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:42.852Z,1516741602.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:43.250Z,1516741603.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:43.649Z,1516741603.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:44.044Z,1516741604.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:44.443Z,1516741604.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:44.840Z,1516741604.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:45.244Z,1516741605.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:45.651Z,1516741605.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:46.046Z,1516741606.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:46.452Z,1516741606.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:46.844Z,1516741606.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:47.243Z,1516741607.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:47.644Z,1516741607.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:48.046Z,1516741608.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:48.439Z,1516741608.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:48.854Z,1516741608.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:49.255Z,1516741609.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:49.650Z,1516741609.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:50.044Z,1516741610.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:50.444Z,1516741610.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:50.847Z,1516741610.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:51.249Z,1516741611.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:51.693Z,1516741611.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:52.092Z,1516741612.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:52.456Z,1516741612.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:52.857Z,1516741612.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:53.260Z,1516741613.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:53.680Z,1516741613.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:54.069Z,1516741614.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:54.462Z,1516741614.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:54.877Z,1516741614.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:55.250Z,1516741615.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:55.673Z,1516741615.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:56.049Z,1516741616.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:56.445Z,1516741616.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:56.859Z,1516741616.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:57.284Z,1516741617.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:57.685Z,1516741617.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:58.069Z,1516741618.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:58.500Z,1516741618.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:06:58.899Z,1516741618.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:05.218Z,1516741625.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:05.358Z,1516741625.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:05.766Z,1516741625.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:06.175Z,1516741626.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:06.568Z,1516741626.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:06.970Z,1516741626.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:07.343Z,1516741627.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:07.755Z,1516741627.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:08.164Z,1516741628.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:08.537Z,1516741628.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:08.957Z,1516741628.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:09.368Z,1516741629.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:09.742Z,1516741629.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:10.157Z,1516741630.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:10.568Z,1516741630.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:10.946Z,1516741630.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:11.354Z,1516741631.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:11.768Z,1516741631.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:12.150Z,1516741632.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:12.558Z,1516741632.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:12.956Z,1516741632.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:13.358Z,1516741633.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:13.756Z,1516741633.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:14.180Z,1516741634.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:14.541Z,1516741634.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:14.963Z,1516741634.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:15.333Z,1516741635.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:15.729Z,1516741635.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:16.119Z,1516741636.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:16.522Z,1516741636.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:16.923Z,1516741636.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:17.322Z,1516741637.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:17.731Z,1516741637.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:18.135Z,1516741638.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:18.537Z,1516741638.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:18.929Z,1516741638.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:19.320Z,1516741639.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:19.721Z,1516741639.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:20.139Z,1516741640.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:20.520Z,1516741640.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:20.933Z,1516741640.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:21.344Z,1516741641.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:21.738Z,1516741641.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:22.137Z,1516741642.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:22.515Z,1516741642.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:23.128Z,1516741643.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:23.316Z,1516741643.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:23.749Z,1516741643.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:24.134Z,1516741644.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:24.551Z,1516741644.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:24.917Z,1516741644.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:25.316Z,1516741645.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:25.725Z,1516741645.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:26.118Z,1516741646.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:26.517Z,1516741646.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:26.922Z,1516741646.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:27.325Z,1516741647.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:27.722Z,1516741647.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:28.120Z,1516741648.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:28.519Z,1516741648.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:28.920Z,1516741648.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:29.325Z,1516741649.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:29.726Z,1516741649.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:30.125Z,1516741650.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:30.526Z,1516741650.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:30.928Z,1516741650.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:31.318Z,1516741651.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:31.725Z,1516741651.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:32.120Z,1516741652.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:32.521Z,1516741652.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:32.925Z,1516741652.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:33.326Z,1516741653.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:33.755Z,1516741653.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:34.121Z,1516741654.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:34.518Z,1516741654.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:34.920Z,1516741654.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:35.329Z,1516741655.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:35.733Z,1516741655.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:36.169Z,1516741656.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:36.529Z,1516741656.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:36.928Z,1516741656.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:37.317Z,1516741657.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:37.722Z,1516741657.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:38.122Z,1516741658.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:38.525Z,1516741658.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:38.934Z,1516741658.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:39.341Z,1516741659.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:39.731Z,1516741659.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:40.137Z,1516741660.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:40.537Z,1516741660.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:40.926Z,1516741660.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:41.325Z,1516741661.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:41.738Z,1516741661.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:42.134Z,1516741662.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:42.532Z,1516741662.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:42.922Z,1516741662.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:43.322Z,1516741663.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:43.737Z,1516741663.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:44.129Z,1516741664.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:44.517Z,1516741664.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:44.938Z,1516741664.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:45.338Z,1516741665.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:45.745Z,1516741665.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:46.136Z,1516741666.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:46.537Z,1516741666.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:46.937Z,1516741666.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:47.333Z,1516741667.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:47.741Z,1516741667.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:48.140Z,1516741668.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:48.541Z,1516741668.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:48.936Z,1516741668.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:49.313Z,1516741669.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:49.725Z,1516741669.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:50.121Z,1516741670.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:50.516Z,1516741670.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:50.926Z,1516741670.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:51.333Z,1516741671.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:51.734Z,1516741671.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:52.129Z,1516741672.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:52.533Z,1516741672.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:52.924Z,1516741672.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:53.331Z,1516741673.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:53.732Z,1516741673.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:54.133Z,1516741674.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:54.541Z,1516741674.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:54.932Z,1516741674.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:55.323Z,1516741675.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:55.735Z,1516741675.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:56.132Z,1516741676.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:56.523Z,1516741676.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:56.937Z,1516741676.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:57.336Z,1516741677.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:57.738Z,1516741677.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:58.126Z,1516741678.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:58.528Z,1516741678.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:07:58.935Z,1516741678.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:02.021Z,1516741682.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:02.144Z,1516741682.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:02.519Z,1516741682.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:02.923Z,1516741682.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:03.286Z,1516741683.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:03.696Z,1516741683.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:04.093Z,1516741684.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:04.489Z,1516741684.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:04.901Z,1516741684.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:05.301Z,1516741685.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:05.725Z,1516741685.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:06.089Z,1516741686.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:06.488Z,1516741686.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:06.895Z,1516741686.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:07.293Z,1516741687.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:07.698Z,1516741687.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:08.105Z,1516741688.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:08.501Z,1516741688.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:08.889Z,1516741688.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:09.288Z,1516741689.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:09.726Z,1516741689.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:10.126Z,1516741690.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:10.525Z,1516741690.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:10.889Z,1516741690.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:11.288Z,1516741691.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:11.702Z,1516741691.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:12.101Z,1516741692.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:12.497Z,1516741692.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:12.889Z,1516741692.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:13.300Z,1516741693.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:13.697Z,1516741693.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:14.101Z,1516741694.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:14.497Z,1516741694.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:14.888Z,1516741694.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:15.297Z,1516741695.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:15.698Z,1516741695.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:16.104Z,1516741696.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:16.503Z,1516741696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:16.888Z,1516741696.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:17.287Z,1516741697.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:17.704Z,1516741697.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:18.108Z,1516741698.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:18.498Z,1516741698.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:18.890Z,1516741698.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:19.301Z,1516741699.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:19.702Z,1516741699.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:20.101Z,1516741700.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:20.509Z,1516741700.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:20.892Z,1516741700.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:21.296Z,1516741701.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:21.702Z,1516741701.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:22.103Z,1516741702.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:22.505Z,1516741702.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:22.891Z,1516741702.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:23.301Z,1516741703.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:23.713Z,1516741703.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:24.101Z,1516741704.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:24.538Z,1516741704.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:24.894Z,1516741704.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:25.293Z,1516741705.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:25.703Z,1516741705.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:26.102Z,1516741706.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:26.500Z,1516741706.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:26.896Z,1516741706.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:27.293Z,1516741707.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:27.703Z,1516741707.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:28.108Z,1516741708.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:28.499Z,1516741708.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:28.896Z,1516741708.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:29.299Z,1516741709.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:29.705Z,1516741709.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:30.103Z,1516741710.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:30.504Z,1516741710.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:30.896Z,1516741710.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:31.296Z,1516741711.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:31.707Z,1516741711.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:32.102Z,1516741712.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:32.500Z,1516741712.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:32.902Z,1516741712.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:33.296Z,1516741713.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:33.713Z,1516741713.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:34.104Z,1516741714.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:34.500Z,1516741714.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:34.889Z,1516741714.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:35.308Z,1516741715.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:35.701Z,1516741715.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:36.108Z,1516741716.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:36.513Z,1516741716.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:36.904Z,1516741716.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:37.299Z,1516741717.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:37.702Z,1516741717.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:38.088Z,1516741718.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:38.501Z,1516741718.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:38.913Z,1516741718.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:39.306Z,1516741719.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:39.710Z,1516741719.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:40.091Z,1516741720.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:40.484Z,1516741720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:40.887Z,1516741720.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:41.303Z,1516741721.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:41.693Z,1516741721.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:42.094Z,1516741722.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:42.497Z,1516741722.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:42.902Z,1516741722.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:43.287Z,1516741723.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:43.702Z,1516741723.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:44.089Z,1516741724.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:44.496Z,1516741724.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:44.902Z,1516741724.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:45.298Z,1516741725.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:45.300Z,1516741725.300 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:45.300Z,1516741725.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 356 2018-01-23T21:08:45.300Z,1516741725.300 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:08:45.312Z,1516741725.312 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:08:45.703Z,1516741725.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:45.715Z,1516741725.715 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:08:45.715Z,1516741725.715 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 356 2018-01-23T21:08:46.093Z,1516741726.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:46.094Z,1516741726.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:08:46.095Z,1516741726.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:08:46.095Z,1516741726.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:08:46.493Z,1516741726.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:46.893Z,1516741726.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:47.296Z,1516741727.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:47.700Z,1516741727.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:48.105Z,1516741728.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:48.502Z,1516741728.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:48.899Z,1516741728.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:49.293Z,1516741729.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:49.699Z,1516741729.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:50.095Z,1516741730.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:50.496Z,1516741730.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:50.906Z,1516741730.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:51.302Z,1516741731.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:51.702Z,1516741731.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:52.091Z,1516741732.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:52.496Z,1516741732.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:52.895Z,1516741732.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:53.296Z,1516741733.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:53.697Z,1516741733.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:54.098Z,1516741734.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:54.508Z,1516741734.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:54.899Z,1516741734.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:55.295Z,1516741735.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:55.696Z,1516741735.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:56.094Z,1516741736.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:56.495Z,1516741736.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:56.901Z,1516741736.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:57.299Z,1516741737.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:57.702Z,1516741737.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:57.705Z,1516741737.705 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T21:08:57.705Z,1516741737.705 [Default:CheckIn:C.Wait] Stopped 2018-01-23T21:08:57.705Z,1516741737.705 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T21:08:57.705Z,1516741737.705 [Default:CheckIn:D] Running Loop=1 2018-01-23T21:08:58.096Z,1516741738.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:58.099Z,1516741738.099 [Default:CheckIn:D] Stopped 2018-01-23T21:08:58.100Z,1516741738.100 [Default:CheckIn:E] Running Loop=1 2018-01-23T21:08:58.496Z,1516741738.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:58.500Z,1516741738.500 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1071.100651 min 2018-01-23T21:08:58.500Z,1516741738.500 [Default:CheckIn:E] Stopped 2018-01-23T21:08:58.500Z,1516741738.500 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T21:08:58.500Z,1516741738.500 [Default:CheckIn] Stopped 2018-01-23T21:08:58.500Z,1516741738.500 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T21:08:58.501Z,1516741738.501 [Default:CheckIn](INFO): Running loop #105 2018-01-23T21:08:58.501Z,1516741738.501 [Default:CheckIn] Running Loop=105 2018-01-23T21:08:58.501Z,1516741738.501 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T21:08:58.501Z,1516741738.501 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T21:08:58.901Z,1516741738.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:08:59.297Z,1516741739.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:02.389Z,1516741742.389 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:02.389Z,1516741742.389 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 356 2018-01-23T21:09:02.389Z,1516741742.389 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:09:02.391Z,1516741742.391 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:02.391Z,1516741742.391 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 356 2018-01-23T21:09:02.391Z,1516741742.391 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:09:02.404Z,1516741742.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:09:02.404Z,1516741742.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:09:02.557Z,1516741742.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:09:02.557Z,1516741742.557 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 356 2018-01-23T21:09:02.557Z,1516741742.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:09:02.558Z,1516741742.558 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 356 2018-01-23T21:09:02.874Z,1516741742.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:09:02.874Z,1516741742.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:09:02.874Z,1516741742.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:09:02.879Z,1516741742.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:09:02.879Z,1516741742.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:09:02.880Z,1516741742.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:09:03.277Z,1516741743.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T21:09:03.278Z,1516741743.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:03.664Z,1516741743.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T21:09:03.665Z,1516741743.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:04.080Z,1516741744.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T21:09:04.081Z,1516741744.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:04.459Z,1516741744.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T21:09:04.460Z,1516741744.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:04.869Z,1516741744.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T21:09:04.870Z,1516741744.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:05.268Z,1516741745.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T21:09:05.269Z,1516741745.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:05.673Z,1516741745.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T21:09:05.674Z,1516741745.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:06.064Z,1516741746.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T21:09:06.065Z,1516741746.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:06.463Z,1516741746.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T21:09:06.464Z,1516741746.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:06.866Z,1516741746.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T21:09:06.867Z,1516741746.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:07.263Z,1516741747.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T21:09:07.264Z,1516741747.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:07.663Z,1516741747.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T21:09:07.664Z,1516741747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:08.067Z,1516741748.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T21:09:08.068Z,1516741748.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:08.467Z,1516741748.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T21:09:08.468Z,1516741748.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:08.876Z,1516741748.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T21:09:08.877Z,1516741748.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:09.261Z,1516741749.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T21:09:09.262Z,1516741749.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:09.668Z,1516741749.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T21:09:09.669Z,1516741749.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:10.062Z,1516741750.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s. 2018-01-23T21:09:10.063Z,1516741750.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:10.471Z,1516741750.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T21:09:10.472Z,1516741750.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:10.872Z,1516741750.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T21:09:10.873Z,1516741750.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:11.270Z,1516741751.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T21:09:11.271Z,1516741751.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:11.676Z,1516741751.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T21:09:11.677Z,1516741751.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:12.066Z,1516741752.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T21:09:12.067Z,1516741752.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:12.457Z,1516741752.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T21:09:12.458Z,1516741752.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:12.872Z,1516741752.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T21:09:12.873Z,1516741752.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:13.263Z,1516741753.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T21:09:13.264Z,1516741753.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:13.664Z,1516741753.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T21:09:13.665Z,1516741753.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:14.079Z,1516741754.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T21:09:14.080Z,1516741754.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:14.467Z,1516741754.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T21:09:14.468Z,1516741754.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:14.877Z,1516741754.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T21:09:14.878Z,1516741754.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:15.259Z,1516741755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T21:09:15.260Z,1516741755.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:15.668Z,1516741755.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T21:09:15.669Z,1516741755.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:16.063Z,1516741756.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T21:09:16.064Z,1516741756.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:16.467Z,1516741756.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T21:09:16.468Z,1516741756.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:16.867Z,1516741756.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T21:09:16.868Z,1516741756.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:17.277Z,1516741757.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T21:09:17.278Z,1516741757.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:17.667Z,1516741757.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T21:09:17.667Z,1516741757.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:18.053Z,1516741758.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T21:09:18.054Z,1516741758.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:18.464Z,1516741758.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T21:09:18.465Z,1516741758.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:18.871Z,1516741758.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T21:09:18.872Z,1516741758.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:19.248Z,1516741759.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T21:09:19.249Z,1516741759.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:19.672Z,1516741759.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T21:09:19.673Z,1516741759.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:20.076Z,1516741760.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T21:09:20.077Z,1516741760.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:20.478Z,1516741760.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T21:09:20.479Z,1516741760.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:20.884Z,1516741760.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T21:09:20.885Z,1516741760.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:21.256Z,1516741761.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T21:09:21.257Z,1516741761.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:21.661Z,1516741761.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T21:09:21.662Z,1516741761.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:22.054Z,1516741762.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T21:09:22.055Z,1516741762.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:22.464Z,1516741762.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:22.862Z,1516741762.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:23.262Z,1516741763.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:23.708Z,1516741763.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:24.057Z,1516741764.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:24.456Z,1516741764.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:24.854Z,1516741764.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:25.256Z,1516741765.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:25.654Z,1516741765.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:26.058Z,1516741766.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:26.458Z,1516741766.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:26.858Z,1516741766.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:27.255Z,1516741767.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:27.659Z,1516741767.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:28.054Z,1516741768.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:28.460Z,1516741768.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:28.885Z,1516741768.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:29.262Z,1516741769.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:29.688Z,1516741769.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:30.053Z,1516741770.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:30.461Z,1516741770.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:30.856Z,1516741770.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:31.257Z,1516741771.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:31.661Z,1516741771.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:32.065Z,1516741772.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:32.466Z,1516741772.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:32.873Z,1516741772.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:33.257Z,1516741773.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:33.658Z,1516741773.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:34.064Z,1516741774.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:34.457Z,1516741774.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:34.866Z,1516741774.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:35.265Z,1516741775.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:35.667Z,1516741775.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:36.057Z,1516741776.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:36.455Z,1516741776.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:36.856Z,1516741776.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:37.261Z,1516741777.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:37.657Z,1516741777.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:38.066Z,1516741778.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:38.465Z,1516741778.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:38.869Z,1516741778.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:39.256Z,1516741779.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:39.657Z,1516741779.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:40.057Z,1516741780.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:40.464Z,1516741780.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:40.873Z,1516741780.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:41.273Z,1516741781.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:41.670Z,1516741781.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:42.053Z,1516741782.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:42.463Z,1516741782.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:42.867Z,1516741782.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:43.258Z,1516741783.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:43.741Z,1516741783.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:44.062Z,1516741784.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:44.458Z,1516741784.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:44.858Z,1516741784.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:45.256Z,1516741785.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:45.663Z,1516741785.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:46.057Z,1516741786.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:46.456Z,1516741786.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:46.862Z,1516741786.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:47.266Z,1516741787.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:47.668Z,1516741787.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:48.061Z,1516741788.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:48.459Z,1516741788.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:48.862Z,1516741788.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:49.263Z,1516741789.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:49.665Z,1516741789.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:50.060Z,1516741790.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:50.455Z,1516741790.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:50.861Z,1516741790.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:51.262Z,1516741791.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:51.666Z,1516741791.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:52.058Z,1516741792.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:52.456Z,1516741792.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:52.865Z,1516741792.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:53.262Z,1516741793.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:53.662Z,1516741793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:54.065Z,1516741794.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:54.456Z,1516741794.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:54.862Z,1516741794.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:55.265Z,1516741795.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:55.665Z,1516741795.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:56.060Z,1516741796.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:56.454Z,1516741796.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:56.866Z,1516741796.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:57.265Z,1516741797.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:57.673Z,1516741797.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:58.065Z,1516741798.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:58.457Z,1516741798.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:58.866Z,1516741798.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:59.265Z,1516741799.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:09:59.667Z,1516741799.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:02.769Z,1516741802.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:02.905Z,1516741802.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:03.273Z,1516741803.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:03.674Z,1516741803.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:04.072Z,1516741804.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:04.462Z,1516741804.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:04.864Z,1516741804.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:05.265Z,1516741805.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:05.663Z,1516741805.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:06.073Z,1516741806.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:06.477Z,1516741806.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:06.872Z,1516741806.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:07.261Z,1516741807.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:07.663Z,1516741807.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:08.078Z,1516741808.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:08.461Z,1516741808.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:08.877Z,1516741808.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:09.276Z,1516741809.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:09.673Z,1516741809.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:10.064Z,1516741810.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:10.462Z,1516741810.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:10.881Z,1516741810.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:11.274Z,1516741811.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:11.681Z,1516741811.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:12.066Z,1516741812.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:12.465Z,1516741812.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:12.878Z,1516741812.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:13.277Z,1516741813.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:13.681Z,1516741813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:14.066Z,1516741814.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:14.467Z,1516741814.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:14.874Z,1516741814.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:15.285Z,1516741815.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:15.676Z,1516741815.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:16.069Z,1516741816.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:16.474Z,1516741816.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:16.875Z,1516741816.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:17.283Z,1516741817.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:17.685Z,1516741817.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:18.073Z,1516741818.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:18.473Z,1516741818.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:18.881Z,1516741818.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:19.282Z,1516741819.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:19.676Z,1516741819.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:20.076Z,1516741820.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:20.472Z,1516741820.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:20.878Z,1516741820.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:21.288Z,1516741821.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:21.681Z,1516741821.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:22.071Z,1516741822.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:22.473Z,1516741822.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:22.881Z,1516741822.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:23.293Z,1516741823.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:23.674Z,1516741823.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:24.072Z,1516741824.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:24.476Z,1516741824.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:24.885Z,1516741824.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:25.284Z,1516741825.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:25.689Z,1516741825.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:26.057Z,1516741826.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:26.456Z,1516741826.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:26.890Z,1516741826.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:27.288Z,1516741827.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:27.697Z,1516741827.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:28.069Z,1516741828.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:28.462Z,1516741828.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:28.871Z,1516741828.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:29.295Z,1516741829.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:29.669Z,1516741829.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:30.065Z,1516741830.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:30.464Z,1516741830.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:30.872Z,1516741830.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:31.278Z,1516741831.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:31.670Z,1516741831.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:32.062Z,1516741832.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:32.465Z,1516741832.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:32.863Z,1516741832.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:33.272Z,1516741833.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:33.673Z,1516741833.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:34.069Z,1516741834.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:34.500Z,1516741834.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:34.864Z,1516741834.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:35.272Z,1516741835.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:35.667Z,1516741835.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:36.075Z,1516741836.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:36.477Z,1516741836.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:36.873Z,1516741836.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:37.269Z,1516741837.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:37.666Z,1516741837.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:38.078Z,1516741838.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:38.469Z,1516741838.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:38.865Z,1516741838.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:39.274Z,1516741839.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:39.689Z,1516741839.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:40.074Z,1516741840.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:40.466Z,1516741840.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:40.873Z,1516741840.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:41.272Z,1516741841.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:41.673Z,1516741841.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:42.079Z,1516741842.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:42.481Z,1516741842.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:42.873Z,1516741842.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:43.272Z,1516741843.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:43.671Z,1516741843.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:44.076Z,1516741844.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:44.466Z,1516741844.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:44.869Z,1516741844.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:45.273Z,1516741845.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:45.678Z,1516741845.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:46.076Z,1516741846.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:46.474Z,1516741846.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:46.876Z,1516741846.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:47.271Z,1516741847.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:47.676Z,1516741847.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:48.078Z,1516741848.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:48.479Z,1516741848.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:48.875Z,1516741848.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:49.272Z,1516741849.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:49.673Z,1516741849.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:50.077Z,1516741850.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:50.468Z,1516741850.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:50.877Z,1516741850.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:51.286Z,1516741851.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:51.689Z,1516741851.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:52.070Z,1516741852.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:52.463Z,1516741852.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:52.866Z,1516741852.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:53.267Z,1516741853.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:53.664Z,1516741853.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:54.069Z,1516741854.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:54.471Z,1516741854.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:54.873Z,1516741854.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:55.265Z,1516741855.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:55.669Z,1516741855.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:56.064Z,1516741856.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:56.467Z,1516741856.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:56.865Z,1516741856.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:57.273Z,1516741857.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:57.674Z,1516741857.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:58.077Z,1516741858.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:58.466Z,1516741858.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:58.864Z,1516741858.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:59.266Z,1516741859.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:10:59.676Z,1516741859.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:02.770Z,1516741862.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:02.913Z,1516741862.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:03.276Z,1516741863.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:03.660Z,1516741863.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:04.059Z,1516741864.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:04.461Z,1516741864.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:04.858Z,1516741864.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:05.265Z,1516741865.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:05.686Z,1516741865.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:06.066Z,1516741866.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:06.470Z,1516741866.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:06.843Z,1516741866.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:07.249Z,1516741867.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:07.673Z,1516741867.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:08.058Z,1516741868.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:08.462Z,1516741868.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:08.854Z,1516741868.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:09.250Z,1516741869.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:09.651Z,1516741869.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:10.061Z,1516741870.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:10.451Z,1516741870.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:10.855Z,1516741870.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:11.261Z,1516741871.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:11.670Z,1516741871.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:12.058Z,1516741872.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:12.457Z,1516741872.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:12.862Z,1516741872.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:13.257Z,1516741873.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:13.657Z,1516741873.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:14.057Z,1516741874.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:14.457Z,1516741874.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:14.870Z,1516741874.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:15.256Z,1516741875.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:15.691Z,1516741875.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:16.051Z,1516741876.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:16.454Z,1516741876.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:16.861Z,1516741876.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:17.262Z,1516741877.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:17.661Z,1516741877.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:18.062Z,1516741878.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:18.460Z,1516741878.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:18.851Z,1516741878.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:19.253Z,1516741879.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:19.660Z,1516741879.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:20.065Z,1516741880.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:20.465Z,1516741880.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:20.861Z,1516741880.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:21.253Z,1516741881.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:21.661Z,1516741881.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:22.065Z,1516741882.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:22.456Z,1516741882.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:22.854Z,1516741882.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:23.270Z,1516741883.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:23.668Z,1516741883.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:24.062Z,1516741884.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:24.461Z,1516741884.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:24.859Z,1516741884.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:25.260Z,1516741885.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:25.659Z,1516741885.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:26.074Z,1516741886.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:26.462Z,1516741886.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:26.877Z,1516741886.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:27.264Z,1516741887.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:27.660Z,1516741887.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:28.063Z,1516741888.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:28.459Z,1516741888.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:28.860Z,1516741888.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:29.275Z,1516741889.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:29.670Z,1516741889.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:30.067Z,1516741890.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:30.471Z,1516741890.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:30.860Z,1516741890.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:31.259Z,1516741891.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:31.665Z,1516741891.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:32.072Z,1516741892.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:32.475Z,1516741892.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:32.879Z,1516741892.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:33.276Z,1516741893.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:33.672Z,1516741893.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:34.071Z,1516741894.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:34.450Z,1516741894.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:34.854Z,1516741894.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:35.279Z,1516741895.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:35.661Z,1516741895.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:36.056Z,1516741896.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:36.455Z,1516741896.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:36.852Z,1516741896.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:37.277Z,1516741897.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:37.654Z,1516741897.654 [PNI_TCM](ERROR): CRC does not match. Expected:0x48094 got:0x16784 2018-01-23T21:11:37.693Z,1516741897.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:38.060Z,1516741898.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:38.456Z,1516741898.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:38.877Z,1516741898.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:39.246Z,1516741899.246 [PNI_TCM](ERROR): CRC does not match. Expected:0x28734 got:0x7233 2018-01-23T21:11:39.282Z,1516741899.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:39.661Z,1516741899.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:40.058Z,1516741900.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:40.469Z,1516741900.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:40.852Z,1516741900.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x33216 got:0x38853 2018-01-23T21:11:40.888Z,1516741900.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:41.269Z,1516741901.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:41.668Z,1516741901.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:42.067Z,1516741902.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:42.457Z,1516741902.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:42.855Z,1516741902.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:43.258Z,1516741903.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:43.669Z,1516741903.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:44.064Z,1516741904.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:44.465Z,1516741904.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:44.864Z,1516741904.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:45.264Z,1516741905.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:45.661Z,1516741905.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:46.055Z,1516741906.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:46.455Z,1516741906.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:46.458Z,1516741906.458 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:46.458Z,1516741906.458 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 357 2018-01-23T21:11:46.458Z,1516741906.458 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:11:46.469Z,1516741906.469 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:11:46.869Z,1516741906.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:46.902Z,1516741906.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:11:46.902Z,1516741906.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 357 2018-01-23T21:11:47.265Z,1516741907.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:47.266Z,1516741907.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:11:47.267Z,1516741907.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:11:47.267Z,1516741907.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:11:47.676Z,1516741907.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:48.065Z,1516741908.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:48.470Z,1516741908.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:48.859Z,1516741908.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:49.260Z,1516741909.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:49.662Z,1516741909.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:50.093Z,1516741910.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:50.466Z,1516741910.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:50.865Z,1516741910.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:51.265Z,1516741911.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:51.672Z,1516741911.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:52.100Z,1516741912.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:52.477Z,1516741912.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:52.899Z,1516741912.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:53.282Z,1516741913.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:53.700Z,1516741913.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:54.089Z,1516741914.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:54.454Z,1516741914.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x11538 got:0x7618 2018-01-23T21:11:54.497Z,1516741914.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:54.896Z,1516741914.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:55.267Z,1516741915.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:55.685Z,1516741915.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:56.060Z,1516741916.060 [PNI_TCM](ERROR): CRC does not match. Expected:0x4230 got:0x28851 2018-01-23T21:11:56.103Z,1516741916.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:56.496Z,1516741916.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:56.901Z,1516741916.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:57.302Z,1516741917.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:57.675Z,1516741917.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:58.102Z,1516741918.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:58.478Z,1516741918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:58.889Z,1516741918.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:59.288Z,1516741919.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:11:59.721Z,1516741919.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:00.114Z,1516741920.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:06.216Z,1516741926.216 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:06.216Z,1516741926.216 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 357 2018-01-23T21:12:06.216Z,1516741926.216 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:12:06.218Z,1516741926.218 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:06.218Z,1516741926.218 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 357 2018-01-23T21:12:06.218Z,1516741926.218 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:12:06.275Z,1516741926.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:12:06.276Z,1516741926.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:12:06.414Z,1516741926.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:12:06.414Z,1516741926.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 357 2018-01-23T21:12:06.423Z,1516741926.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:12:06.423Z,1516741926.423 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 357 2018-01-23T21:12:06.753Z,1516741926.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:12:06.754Z,1516741926.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:12:06.754Z,1516741926.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:12:06.755Z,1516741926.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:12:06.755Z,1516741926.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:12:06.756Z,1516741926.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:12:07.148Z,1516741927.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s. 2018-01-23T21:12:07.149Z,1516741927.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:07.546Z,1516741927.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s. 2018-01-23T21:12:07.551Z,1516741927.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:07.930Z,1516741927.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s. 2018-01-23T21:12:07.930Z,1516741927.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:08.341Z,1516741928.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s. 2018-01-23T21:12:08.341Z,1516741928.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:08.745Z,1516741928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s. 2018-01-23T21:12:08.745Z,1516741928.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:09.149Z,1516741929.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T21:12:09.150Z,1516741929.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:09.526Z,1516741929.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s. 2018-01-23T21:12:09.531Z,1516741929.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:09.929Z,1516741929.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s. 2018-01-23T21:12:09.930Z,1516741929.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:10.333Z,1516741930.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s. 2018-01-23T21:12:10.334Z,1516741930.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:10.726Z,1516741930.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s. 2018-01-23T21:12:10.731Z,1516741930.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:11.137Z,1516741931.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s. 2018-01-23T21:12:11.138Z,1516741931.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:11.545Z,1516741931.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s. 2018-01-23T21:12:11.546Z,1516741931.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:11.941Z,1516741931.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s. 2018-01-23T21:12:11.942Z,1516741931.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:12.341Z,1516741932.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s. 2018-01-23T21:12:12.342Z,1516741932.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:12.736Z,1516741932.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s. 2018-01-23T21:12:12.737Z,1516741932.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:13.145Z,1516741933.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s. 2018-01-23T21:12:13.146Z,1516741933.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:13.537Z,1516741933.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s. 2018-01-23T21:12:13.538Z,1516741933.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:13.969Z,1516741933.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s. 2018-01-23T21:12:13.970Z,1516741933.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:14.353Z,1516741934.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s. 2018-01-23T21:12:14.354Z,1516741934.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:14.783Z,1516741934.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s. 2018-01-23T21:12:14.784Z,1516741934.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:15.157Z,1516741935.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s. 2018-01-23T21:12:15.157Z,1516741935.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:15.540Z,1516741935.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s. 2018-01-23T21:12:15.541Z,1516741935.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:15.919Z,1516741935.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s. 2018-01-23T21:12:15.920Z,1516741935.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:16.354Z,1516741936.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s. 2018-01-23T21:12:16.356Z,1516741936.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:16.727Z,1516741936.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s. 2018-01-23T21:12:16.728Z,1516741936.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:17.155Z,1516741937.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s. 2018-01-23T21:12:17.156Z,1516741937.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:17.560Z,1516741937.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s. 2018-01-23T21:12:17.561Z,1516741937.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:17.934Z,1516741937.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s. 2018-01-23T21:12:17.951Z,1516741937.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:18.325Z,1516741938.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s. 2018-01-23T21:12:18.326Z,1516741938.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:18.758Z,1516741938.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s. 2018-01-23T21:12:18.759Z,1516741938.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:19.132Z,1516741939.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s. 2018-01-23T21:12:19.133Z,1516741939.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:19.527Z,1516741939.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s. 2018-01-23T21:12:19.528Z,1516741939.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:19.928Z,1516741939.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s. 2018-01-23T21:12:19.929Z,1516741939.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:20.331Z,1516741940.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s. 2018-01-23T21:12:20.332Z,1516741940.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:20.733Z,1516741940.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s. 2018-01-23T21:12:20.734Z,1516741940.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:21.129Z,1516741941.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s. 2018-01-23T21:12:21.130Z,1516741941.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:21.532Z,1516741941.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s. 2018-01-23T21:12:21.533Z,1516741941.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:21.926Z,1516741941.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s. 2018-01-23T21:12:21.927Z,1516741941.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:22.336Z,1516741942.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s. 2018-01-23T21:12:22.337Z,1516741942.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:22.728Z,1516741942.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s. 2018-01-23T21:12:22.729Z,1516741942.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:23.130Z,1516741943.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s. 2018-01-23T21:12:23.131Z,1516741943.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:23.533Z,1516741943.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T21:12:23.534Z,1516741943.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:23.942Z,1516741943.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s. 2018-01-23T21:12:23.959Z,1516741943.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:24.326Z,1516741944.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s. 2018-01-23T21:12:24.327Z,1516741944.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:24.732Z,1516741944.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s. 2018-01-23T21:12:24.733Z,1516741944.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:25.136Z,1516741945.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s. 2018-01-23T21:12:25.137Z,1516741945.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:25.527Z,1516741945.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T21:12:25.528Z,1516741945.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:25.936Z,1516741945.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s. 2018-01-23T21:12:25.937Z,1516741945.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:26.335Z,1516741946.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:26.734Z,1516741946.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:27.136Z,1516741947.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:27.537Z,1516741947.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:27.930Z,1516741947.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:28.328Z,1516741948.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:28.727Z,1516741948.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:29.133Z,1516741949.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:29.540Z,1516741949.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:29.941Z,1516741949.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:30.331Z,1516741950.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:30.732Z,1516741950.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:31.137Z,1516741951.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:31.532Z,1516741951.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:31.932Z,1516741951.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:32.337Z,1516741952.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:32.741Z,1516741952.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:33.144Z,1516741953.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:33.537Z,1516741953.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:33.931Z,1516741953.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:34.328Z,1516741954.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:34.732Z,1516741954.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:35.137Z,1516741955.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:35.545Z,1516741955.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:35.945Z,1516741955.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:36.326Z,1516741956.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:36.732Z,1516741956.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:37.133Z,1516741957.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:37.532Z,1516741957.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:37.929Z,1516741957.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:38.345Z,1516741958.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:38.741Z,1516741958.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:39.144Z,1516741959.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:39.537Z,1516741959.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:39.930Z,1516741959.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:40.333Z,1516741960.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:40.737Z,1516741960.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:41.142Z,1516741961.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:41.543Z,1516741961.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:41.942Z,1516741961.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:42.328Z,1516741962.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:42.736Z,1516741962.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:43.138Z,1516741963.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:43.541Z,1516741963.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:43.944Z,1516741963.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:44.336Z,1516741964.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:44.730Z,1516741964.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:45.144Z,1516741965.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:45.546Z,1516741965.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:45.942Z,1516741965.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:46.339Z,1516741966.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:46.742Z,1516741966.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:47.148Z,1516741967.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:47.548Z,1516741967.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:47.949Z,1516741967.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:48.340Z,1516741968.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:48.741Z,1516741968.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:49.153Z,1516741969.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:49.547Z,1516741969.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:49.948Z,1516741969.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:50.342Z,1516741970.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:50.732Z,1516741970.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:51.144Z,1516741971.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:51.555Z,1516741971.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:51.941Z,1516741971.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:52.390Z,1516741972.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:52.745Z,1516741972.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:53.151Z,1516741973.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:53.548Z,1516741973.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:53.946Z,1516741973.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:54.320Z,1516741974.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:54.724Z,1516741974.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:55.146Z,1516741975.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:55.551Z,1516741975.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:55.956Z,1516741975.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:56.328Z,1516741976.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:56.723Z,1516741976.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:57.155Z,1516741977.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:57.556Z,1516741977.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:57.957Z,1516741977.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:58.333Z,1516741978.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:58.733Z,1516741978.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:59.134Z,1516741979.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:59.559Z,1516741979.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:12:59.931Z,1516741979.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:00.327Z,1516741980.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:03.424Z,1516741983.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:03.565Z,1516741983.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:03.912Z,1516741983.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:04.316Z,1516741984.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:04.709Z,1516741984.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:05.084Z,1516741985.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:05.491Z,1516741985.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:05.893Z,1516741985.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:06.298Z,1516741986.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:06.701Z,1516741986.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:07.090Z,1516741987.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:07.487Z,1516741987.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:07.888Z,1516741987.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:08.293Z,1516741988.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:08.691Z,1516741988.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:09.089Z,1516741989.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:09.501Z,1516741989.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:09.894Z,1516741989.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:10.294Z,1516741990.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:10.688Z,1516741990.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:11.096Z,1516741991.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:11.490Z,1516741991.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:11.888Z,1516741991.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:12.293Z,1516741992.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:12.694Z,1516741992.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:13.093Z,1516741993.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:13.488Z,1516741993.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:13.899Z,1516741993.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:14.286Z,1516741994.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:14.697Z,1516741994.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:15.088Z,1516741995.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:15.497Z,1516741995.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:15.894Z,1516741995.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:16.293Z,1516741996.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:16.687Z,1516741996.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:17.086Z,1516741997.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:17.489Z,1516741997.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:17.892Z,1516741997.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:18.297Z,1516741998.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:18.694Z,1516741998.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:19.094Z,1516741999.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:19.488Z,1516741999.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:19.889Z,1516741999.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:20.300Z,1516742000.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:20.693Z,1516742000.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:21.089Z,1516742001.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:21.494Z,1516742001.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:21.894Z,1516742001.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:22.293Z,1516742002.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:22.689Z,1516742002.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:23.087Z,1516742003.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:23.497Z,1516742003.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:23.887Z,1516742003.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:24.297Z,1516742004.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:24.694Z,1516742004.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:25.097Z,1516742005.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:25.497Z,1516742005.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:25.888Z,1516742005.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:26.286Z,1516742006.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:26.689Z,1516742006.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:27.088Z,1516742007.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:27.497Z,1516742007.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:27.894Z,1516742007.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:28.293Z,1516742008.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:28.687Z,1516742008.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:29.093Z,1516742009.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:29.489Z,1516742009.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:29.887Z,1516742009.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:30.297Z,1516742010.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:30.694Z,1516742010.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:31.093Z,1516742011.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:31.493Z,1516742011.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:31.889Z,1516742011.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:32.288Z,1516742012.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:32.693Z,1516742012.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:33.089Z,1516742013.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:33.505Z,1516742013.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:33.902Z,1516742013.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:34.299Z,1516742014.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:34.690Z,1516742014.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:35.094Z,1516742015.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:35.492Z,1516742015.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:35.897Z,1516742015.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:36.299Z,1516742016.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:36.705Z,1516742016.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:37.099Z,1516742017.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:37.495Z,1516742017.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:37.891Z,1516742017.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:38.296Z,1516742018.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:38.695Z,1516742018.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:39.100Z,1516742019.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:39.498Z,1516742019.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:39.902Z,1516742019.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:40.309Z,1516742020.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:40.699Z,1516742020.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:41.095Z,1516742021.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:41.500Z,1516742021.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:41.893Z,1516742021.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:42.309Z,1516742022.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:42.708Z,1516742022.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:43.098Z,1516742023.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:43.493Z,1516742023.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:43.901Z,1516742023.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:44.290Z,1516742024.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:44.695Z,1516742024.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:45.101Z,1516742025.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:45.501Z,1516742025.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:45.906Z,1516742025.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:46.299Z,1516742026.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:46.695Z,1516742026.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:47.099Z,1516742027.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:47.501Z,1516742027.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:47.893Z,1516742027.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:48.300Z,1516742028.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:48.711Z,1516742028.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:49.104Z,1516742029.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:49.492Z,1516742029.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:49.905Z,1516742029.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:50.280Z,1516742030.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:50.705Z,1516742030.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:51.113Z,1516742031.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:51.514Z,1516742031.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:51.917Z,1516742031.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:52.314Z,1516742032.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:52.693Z,1516742032.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:53.092Z,1516742033.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:53.496Z,1516742033.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:53.921Z,1516742033.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:54.318Z,1516742034.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:54.720Z,1516742034.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:55.097Z,1516742035.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:55.490Z,1516742035.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:55.897Z,1516742035.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:56.287Z,1516742036.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:56.697Z,1516742036.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:57.095Z,1516742037.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:57.498Z,1516742037.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:57.897Z,1516742037.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:58.305Z,1516742038.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:58.694Z,1516742038.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:58.698Z,1516742038.698 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T21:08:58.5Z 2018-01-23T21:13:58.698Z,1516742038.698 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T21:13:58.698Z,1516742038.698 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T21:13:59.101Z,1516742039.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:59.635Z,1516742039.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:13:59.894Z,1516742039.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:03.050Z,1516742043.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:03.135Z,1516742043.135 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0420.lzma 2018-01-23T21:14:03.201Z,1516742043.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:03.541Z,1516742043.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:03.881Z,1516742043.881 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0420.lzma.bak 2018-01-23T21:14:03.881Z,1516742043.881 [DataOverHttps](INFO): SBD MOMSN=7756655 2018-01-23T21:14:03.947Z,1516742043.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:04.569Z,1516742044.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:04.741Z,1516742044.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:07.823Z,1516742047.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:07.958Z,1516742047.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:08.344Z,1516742048.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:08.753Z,1516742048.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:09.113Z,1516742049.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:09.525Z,1516742049.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:12.614Z,1516742052.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:12.695Z,1516742052.695 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180123T031358/Express0421.lzma 2018-01-23T21:14:12.761Z,1516742052.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:13.104Z,1516742053.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:13.445Z,1516742053.445 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0421.lzma.bak 2018-01-23T21:14:13.445Z,1516742053.445 [DataOverHttps](INFO): SBD MOMSN=7756657 2018-01-23T21:14:13.518Z,1516742053.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:14.156Z,1516742054.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:14.163Z,1516742054.163 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T21:14:14.163Z,1516742054.163 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T21:14:14.163Z,1516742054.163 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T21:14:14.308Z,1516742054.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:17.408Z,1516742057.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:17.533Z,1516742057.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:17.836Z,1516742057.836 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T21:14:17.836Z,1516742057.836 [NAL9602] Data Fault, FailCount= 3 2018-01-23T21:14:17.836Z,1516742057.836 [NAL9602](ERROR): Data Fault 2018-01-23T21:14:17.904Z,1516742057.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:17.918Z,1516742057.918 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T21:14:18.252Z,1516742058.252 [NAL9602](INFO): Powering down 2018-01-23T21:14:18.288Z,1516742058.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:18.678Z,1516742058.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:19.094Z,1516742059.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:19.122Z,1516742059.122 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T21:14:19.122Z,1516742059.122 [NAL9602] No Fault, FailCount= 3 2018-01-23T21:14:19.475Z,1516742059.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:19.878Z,1516742059.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:20.280Z,1516742060.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:20.675Z,1516742060.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:21.072Z,1516742061.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:21.477Z,1516742061.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:21.879Z,1516742061.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:22.272Z,1516742062.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:22.690Z,1516742062.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:23.081Z,1516742063.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:23.483Z,1516742063.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:23.881Z,1516742063.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:24.275Z,1516742064.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:24.676Z,1516742064.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:25.083Z,1516742065.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:25.479Z,1516742065.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:25.882Z,1516742065.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:26.276Z,1516742066.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:26.679Z,1516742066.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:27.076Z,1516742067.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:27.489Z,1516742067.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:27.879Z,1516742067.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:28.277Z,1516742068.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:28.684Z,1516742068.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:29.088Z,1516742069.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:29.472Z,1516742069.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:29.866Z,1516742069.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:30.266Z,1516742070.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:30.667Z,1516742070.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:31.099Z,1516742071.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:31.475Z,1516742071.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:31.873Z,1516742071.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:32.279Z,1516742072.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:32.676Z,1516742072.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:33.074Z,1516742073.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:33.476Z,1516742073.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:33.874Z,1516742073.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:34.275Z,1516742074.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:34.679Z,1516742074.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:35.075Z,1516742075.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:35.476Z,1516742075.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:35.877Z,1516742075.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:36.282Z,1516742076.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:36.688Z,1516742076.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:37.076Z,1516742077.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:37.475Z,1516742077.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:37.877Z,1516742077.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:38.284Z,1516742078.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:38.676Z,1516742078.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:39.075Z,1516742079.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:39.475Z,1516742079.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:39.877Z,1516742079.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:40.281Z,1516742080.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:40.679Z,1516742080.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:41.087Z,1516742081.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:41.486Z,1516742081.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:41.515Z,1516742081.515 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T21:14:41.887Z,1516742081.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:42.288Z,1516742082.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:42.683Z,1516742082.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:43.070Z,1516742083.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:43.496Z,1516742083.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:43.891Z,1516742083.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:44.317Z,1516742084.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:44.670Z,1516742084.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:45.064Z,1516742085.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:45.498Z,1516742085.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:45.874Z,1516742085.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:46.266Z,1516742086.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:46.697Z,1516742086.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:47.072Z,1516742087.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:47.471Z,1516742087.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:47.473Z,1516742087.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:47.473Z,1516742087.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 358 2018-01-23T21:14:47.473Z,1516742087.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:14:47.486Z,1516742087.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:14:47.874Z,1516742087.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:47.887Z,1516742087.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:14:47.887Z,1516742087.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 358 2018-01-23T21:14:48.275Z,1516742088.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:48.276Z,1516742088.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:14:48.276Z,1516742088.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:14:48.277Z,1516742088.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:14:48.636Z,1516742088.636 [NAL9602](INFO): Powering up NAL9602 2018-01-23T21:14:48.680Z,1516742088.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:49.074Z,1516742089.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:49.479Z,1516742089.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:49.882Z,1516742089.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:50.275Z,1516742090.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:50.675Z,1516742090.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:51.073Z,1516742091.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:51.475Z,1516742091.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:51.876Z,1516742091.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:52.277Z,1516742092.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:52.678Z,1516742092.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:53.075Z,1516742093.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:53.475Z,1516742093.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:53.874Z,1516742093.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:54.274Z,1516742094.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:54.674Z,1516742094.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:55.080Z,1516742095.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:55.474Z,1516742095.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:55.874Z,1516742095.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:56.274Z,1516742096.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:56.683Z,1516742096.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:57.074Z,1516742097.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:57.474Z,1516742097.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:57.874Z,1516742097.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:58.272Z,1516742098.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:58.674Z,1516742098.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:59.078Z,1516742099.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:59.485Z,1516742099.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:14:59.836Z,1516742099.836 [NAL9602](INFO): NAL9602 initialized 2018-01-23T21:14:59.888Z,1516742099.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:00.279Z,1516742100.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:00.686Z,1516742100.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:01.097Z,1516742101.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:01.489Z,1516742101.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:01.877Z,1516742101.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:02.277Z,1516742102.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:02.689Z,1516742102.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:03.075Z,1516742103.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:03.485Z,1516742103.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:03.889Z,1516742103.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:04.287Z,1516742104.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:04.679Z,1516742104.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:05.088Z,1516742105.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:05.477Z,1516742105.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:05.882Z,1516742105.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:06.284Z,1516742106.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:06.690Z,1516742106.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:07.089Z,1516742107.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:07.089Z,1516742107.089 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 358 2018-01-23T21:15:07.089Z,1516742107.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:15:07.091Z,1516742107.091 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:07.091Z,1516742107.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 358 2018-01-23T21:15:07.091Z,1516742107.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:15:07.112Z,1516742107.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:15:07.112Z,1516742107.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:15:07.501Z,1516742107.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:15:07.501Z,1516742107.501 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 358 2018-01-23T21:15:07.501Z,1516742107.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:15:07.501Z,1516742107.501 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 358 2018-01-23T21:15:07.878Z,1516742107.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:15:07.878Z,1516742107.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:15:07.879Z,1516742107.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:15:07.879Z,1516742107.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:15:07.880Z,1516742107.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:15:07.880Z,1516742107.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:15:08.287Z,1516742108.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:15:08.288Z,1516742108.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:08.692Z,1516742108.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:15:08.693Z,1516742108.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:09.084Z,1516742109.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:15:09.085Z,1516742109.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:09.492Z,1516742109.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:15:09.493Z,1516742109.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:09.895Z,1516742109.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:15:09.896Z,1516742109.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:10.298Z,1516742110.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:15:10.299Z,1516742110.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:10.688Z,1516742110.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:15:10.689Z,1516742110.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:11.090Z,1516742111.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:15:11.091Z,1516742111.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:11.484Z,1516742111.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:15:11.485Z,1516742111.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:11.888Z,1516742111.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:15:11.889Z,1516742111.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:12.296Z,1516742112.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:15:12.297Z,1516742112.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:12.698Z,1516742112.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:15:12.699Z,1516742112.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:13.103Z,1516742113.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:15:13.104Z,1516742113.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:13.501Z,1516742113.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:15:13.502Z,1516742113.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:13.871Z,1516742113.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:15:13.872Z,1516742113.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:14.276Z,1516742114.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:15:14.277Z,1516742114.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:14.710Z,1516742114.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:15:14.711Z,1516742114.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:17.771Z,1516742117.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T21:15:17.772Z,1516742117.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:17.936Z,1516742117.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:15:17.937Z,1516742117.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:18.273Z,1516742118.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:15:18.274Z,1516742118.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:18.672Z,1516742118.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:15:18.673Z,1516742118.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:19.063Z,1516742119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T21:15:19.064Z,1516742119.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:19.463Z,1516742119.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T21:15:19.464Z,1516742119.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:19.855Z,1516742119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:15:19.856Z,1516742119.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:20.267Z,1516742120.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:15:20.268Z,1516742120.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:20.677Z,1516742120.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:15:20.678Z,1516742120.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:21.074Z,1516742121.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T21:15:21.075Z,1516742121.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:21.476Z,1516742121.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T21:15:21.477Z,1516742121.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:21.875Z,1516742121.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T21:15:21.876Z,1516742121.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:22.247Z,1516742122.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T21:15:22.248Z,1516742122.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:22.669Z,1516742122.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T21:15:22.670Z,1516742122.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:23.054Z,1516742123.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:15:23.055Z,1516742123.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:23.478Z,1516742123.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:15:23.483Z,1516742123.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:23.881Z,1516742123.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:15:23.882Z,1516742123.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:24.287Z,1516742124.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:15:24.288Z,1516742124.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:24.652Z,1516742124.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T21:15:24.653Z,1516742124.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:25.056Z,1516742125.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T21:15:25.057Z,1516742125.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:25.454Z,1516742125.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T21:15:25.455Z,1516742125.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:25.857Z,1516742125.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:15:25.858Z,1516742125.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:26.255Z,1516742126.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T21:15:26.256Z,1516742126.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:26.664Z,1516742126.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:15:26.665Z,1516742126.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:27.069Z,1516742127.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T21:15:27.070Z,1516742127.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:27.461Z,1516742127.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:27.858Z,1516742127.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:28.260Z,1516742128.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:28.668Z,1516742128.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:29.066Z,1516742129.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:29.462Z,1516742129.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:29.866Z,1516742129.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:30.269Z,1516742130.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:30.660Z,1516742130.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:31.055Z,1516742131.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:31.454Z,1516742131.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:31.856Z,1516742131.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:32.255Z,1516742132.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:32.664Z,1516742132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:33.066Z,1516742133.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:33.462Z,1516742133.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:33.854Z,1516742133.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:34.256Z,1516742134.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:34.656Z,1516742134.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:35.054Z,1516742135.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:35.461Z,1516742135.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:35.862Z,1516742135.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:36.268Z,1516742136.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:36.660Z,1516742136.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:37.055Z,1516742137.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:37.460Z,1516742137.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:37.858Z,1516742137.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:38.254Z,1516742138.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:38.664Z,1516742138.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:39.066Z,1516742139.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:39.462Z,1516742139.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:39.854Z,1516742139.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:40.260Z,1516742140.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:40.657Z,1516742140.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:41.060Z,1516742141.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:41.469Z,1516742141.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:41.866Z,1516742141.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:42.268Z,1516742142.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:42.660Z,1516742142.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:43.057Z,1516742143.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:43.462Z,1516742143.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:43.863Z,1516742143.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:44.264Z,1516742144.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:44.666Z,1516742144.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:45.066Z,1516742145.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:45.466Z,1516742145.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:45.856Z,1516742145.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:46.257Z,1516742146.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:46.661Z,1516742146.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:47.056Z,1516742147.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:47.467Z,1516742147.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:47.869Z,1516742147.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:48.266Z,1516742148.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:48.657Z,1516742148.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:49.067Z,1516742149.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:49.455Z,1516742149.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:49.859Z,1516742149.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:50.266Z,1516742150.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:50.667Z,1516742150.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:51.073Z,1516742151.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:51.477Z,1516742151.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:51.856Z,1516742151.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:52.261Z,1516742152.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:52.666Z,1516742152.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:53.064Z,1516742153.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:53.469Z,1516742153.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:53.877Z,1516742153.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:54.267Z,1516742154.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:54.665Z,1516742154.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:55.065Z,1516742155.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:55.464Z,1516742155.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:55.863Z,1516742155.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:55.877Z,1516742155.877 [CBIT](IMPORTANT): Beginning ground fault scan 2018-01-23T21:15:56.264Z,1516742156.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:56.679Z,1516742156.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:57.069Z,1516742157.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:57.488Z,1516742157.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:57.852Z,1516742157.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:58.248Z,1516742158.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:58.660Z,1516742158.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:59.052Z,1516742159.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:59.458Z,1516742159.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:15:59.866Z,1516742159.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:00.268Z,1516742160.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:00.654Z,1516742160.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:01.057Z,1516742161.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:01.462Z,1516742161.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:01.861Z,1516742161.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:02.258Z,1516742162.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:02.673Z,1516742162.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:03.071Z,1516742163.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:03.473Z,1516742163.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:03.865Z,1516742163.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:04.257Z,1516742164.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:04.662Z,1516742164.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:05.059Z,1516742165.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:05.467Z,1516742165.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:05.875Z,1516742165.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:06.267Z,1516742166.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:06.663Z,1516742166.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:06.680Z,1516742166.680 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.002570 CHAN A1 (24V): -0.005928 CHAN A2 (12V): -0.000031 CHAN A3 (5V): -0.001713 CHAN B0 (3.3V): -0.000127 CHAN B1 (3.15aV): 0.000492 CHAN B2 (3.15bV): -0.000160 CHAN B3 (GND): -0.000139 OPEN: 0.005279 Full Scale Calc: 4.765 mA, -1.589 mA 2018-01-23T21:16:07.073Z,1516742167.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:07.475Z,1516742167.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:07.877Z,1516742167.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:08.274Z,1516742168.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:08.658Z,1516742168.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:09.051Z,1516742169.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:09.480Z,1516742169.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:09.883Z,1516742169.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:10.262Z,1516742170.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:10.653Z,1516742170.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:11.061Z,1516742171.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:11.458Z,1516742171.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:11.866Z,1516742171.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:12.264Z,1516742172.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:12.660Z,1516742172.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:13.055Z,1516742173.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:13.460Z,1516742173.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:13.861Z,1516742173.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:14.265Z,1516742174.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:14.659Z,1516742174.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:15.055Z,1516742175.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:18.191Z,1516742178.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:18.337Z,1516742178.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:18.662Z,1516742178.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:19.061Z,1516742179.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:19.453Z,1516742179.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:19.865Z,1516742179.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:20.261Z,1516742180.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:20.661Z,1516742180.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:21.062Z,1516742181.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:21.462Z,1516742181.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:21.856Z,1516742181.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:22.255Z,1516742182.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:22.660Z,1516742182.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:23.055Z,1516742183.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:23.466Z,1516742183.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:23.862Z,1516742183.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:24.269Z,1516742184.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:24.668Z,1516742184.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:25.061Z,1516742185.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:25.461Z,1516742185.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:25.863Z,1516742185.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:26.262Z,1516742186.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:26.657Z,1516742186.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:27.056Z,1516742187.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:27.463Z,1516742187.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:27.862Z,1516742187.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:28.265Z,1516742188.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:28.661Z,1516742188.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:29.056Z,1516742189.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:29.465Z,1516742189.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:29.862Z,1516742189.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:30.261Z,1516742190.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:30.658Z,1516742190.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:31.061Z,1516742191.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:31.461Z,1516742191.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:31.862Z,1516742191.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:32.268Z,1516742192.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:32.656Z,1516742192.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:33.058Z,1516742193.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:33.470Z,1516742193.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:33.871Z,1516742193.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:34.268Z,1516742194.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:34.669Z,1516742194.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:35.061Z,1516742195.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:35.468Z,1516742195.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:35.888Z,1516742195.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:36.282Z,1516742196.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:36.678Z,1516742196.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:37.053Z,1516742197.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:37.481Z,1516742197.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:37.893Z,1516742197.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:38.308Z,1516742198.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:38.669Z,1516742198.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:39.071Z,1516742199.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:39.477Z,1516742199.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:39.888Z,1516742199.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:40.284Z,1516742200.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:40.700Z,1516742200.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:41.085Z,1516742201.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:41.497Z,1516742201.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:41.860Z,1516742201.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:42.265Z,1516742202.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:42.659Z,1516742202.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:43.057Z,1516742203.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:43.469Z,1516742203.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:43.866Z,1516742203.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:44.262Z,1516742204.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:44.662Z,1516742204.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:45.059Z,1516742205.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:45.456Z,1516742205.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:45.869Z,1516742205.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:46.266Z,1516742206.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:46.668Z,1516742206.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:47.059Z,1516742207.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:47.501Z,1516742207.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:47.866Z,1516742207.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:48.273Z,1516742208.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:48.675Z,1516742208.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:49.084Z,1516742209.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:49.484Z,1516742209.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:49.858Z,1516742209.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:50.257Z,1516742210.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:50.669Z,1516742210.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:51.069Z,1516742211.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:51.469Z,1516742211.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:51.875Z,1516742211.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:52.279Z,1516742212.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:52.719Z,1516742212.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:53.090Z,1516742213.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:53.526Z,1516742213.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:53.889Z,1516742213.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:54.305Z,1516742214.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:54.678Z,1516742214.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:55.114Z,1516742215.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:55.481Z,1516742215.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:55.878Z,1516742215.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:56.294Z,1516742216.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:56.700Z,1516742216.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:57.069Z,1516742217.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:57.462Z,1516742217.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:57.873Z,1516742217.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:58.274Z,1516742218.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:58.681Z,1516742218.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:59.075Z,1516742219.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:59.488Z,1516742219.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:16:59.869Z,1516742219.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:00.310Z,1516742220.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:00.714Z,1516742220.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:01.088Z,1516742221.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:01.501Z,1516742221.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:01.921Z,1516742221.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:02.305Z,1516742222.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:02.717Z,1516742222.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:03.101Z,1516742223.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:03.508Z,1516742223.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:03.886Z,1516742223.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:04.266Z,1516742224.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:04.676Z,1516742224.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:05.071Z,1516742225.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:05.482Z,1516742225.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:05.910Z,1516742225.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:06.289Z,1516742226.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:06.717Z,1516742226.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:07.106Z,1516742227.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:07.477Z,1516742227.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:07.889Z,1516742227.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:08.291Z,1516742228.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:08.682Z,1516742228.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:09.132Z,1516742229.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:09.505Z,1516742229.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:09.889Z,1516742229.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:10.291Z,1516742230.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:10.713Z,1516742230.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:11.061Z,1516742231.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:11.492Z,1516742231.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:11.896Z,1516742231.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:12.264Z,1516742232.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:12.674Z,1516742232.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:13.103Z,1516742233.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:13.470Z,1516742233.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:13.866Z,1516742233.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:14.276Z,1516742234.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:14.665Z,1516742234.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:15.073Z,1516742235.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:15.469Z,1516742235.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:19.506Z,1516742239.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:19.661Z,1516742239.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:20.035Z,1516742240.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:20.429Z,1516742240.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:20.833Z,1516742240.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:21.231Z,1516742241.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:21.597Z,1516742241.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:22.033Z,1516742242.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:22.401Z,1516742242.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:22.834Z,1516742242.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:23.214Z,1516742243.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:23.612Z,1516742243.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:24.001Z,1516742244.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:24.406Z,1516742244.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:24.804Z,1516742244.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:25.202Z,1516742245.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:25.606Z,1516742245.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:26.009Z,1516742246.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:26.414Z,1516742246.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:26.811Z,1516742246.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:27.207Z,1516742247.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:27.611Z,1516742247.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:28.009Z,1516742248.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:28.415Z,1516742248.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:28.825Z,1516742248.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:29.225Z,1516742249.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:29.624Z,1516742249.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:30.001Z,1516742250.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:30.411Z,1516742250.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:30.825Z,1516742250.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:31.196Z,1516742251.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:31.626Z,1516742251.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:32.029Z,1516742252.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:32.426Z,1516742252.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:32.809Z,1516742252.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:33.204Z,1516742253.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:33.600Z,1516742253.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:34.008Z,1516742254.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:34.413Z,1516742254.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:34.814Z,1516742254.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:35.217Z,1516742255.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:35.614Z,1516742255.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:36.005Z,1516742256.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:36.415Z,1516742256.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:36.806Z,1516742256.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:37.205Z,1516742257.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:37.619Z,1516742257.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:38.024Z,1516742258.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:38.417Z,1516742258.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:38.816Z,1516742258.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:39.218Z,1516742259.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:39.601Z,1516742259.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:40.015Z,1516742260.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:40.417Z,1516742260.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:40.821Z,1516742260.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:41.220Z,1516742261.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:41.629Z,1516742261.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:41.993Z,1516742261.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:42.416Z,1516742262.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:42.796Z,1516742262.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:43.201Z,1516742263.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:43.626Z,1516742263.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:44.036Z,1516742264.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:44.426Z,1516742264.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:44.801Z,1516742264.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:45.200Z,1516742265.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:45.610Z,1516742265.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:46.014Z,1516742266.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:46.418Z,1516742266.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:46.809Z,1516742266.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:47.209Z,1516742267.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:47.607Z,1516742267.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:48.005Z,1516742268.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:48.409Z,1516742268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:48.411Z,1516742268.411 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:48.411Z,1516742268.411 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 359 2018-01-23T21:17:48.411Z,1516742268.411 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:17:48.439Z,1516742268.439 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:17:48.825Z,1516742268.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:48.841Z,1516742268.841 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:17:48.842Z,1516742268.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 359 2018-01-23T21:17:49.213Z,1516742269.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:49.214Z,1516742269.214 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:17:49.215Z,1516742269.215 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:17:49.215Z,1516742269.215 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:17:49.616Z,1516742269.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:50.009Z,1516742270.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:50.405Z,1516742270.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:50.808Z,1516742270.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:51.208Z,1516742271.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:51.654Z,1516742271.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:52.017Z,1516742272.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:52.414Z,1516742272.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:52.805Z,1516742272.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:53.212Z,1516742273.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:53.619Z,1516742273.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:54.017Z,1516742274.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:54.413Z,1516742274.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:54.817Z,1516742274.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:55.213Z,1516742275.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:55.621Z,1516742275.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:56.019Z,1516742276.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:56.415Z,1516742276.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:56.815Z,1516742276.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:57.217Z,1516742277.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:57.625Z,1516742277.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:58.021Z,1516742278.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:58.421Z,1516742278.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:58.808Z,1516742278.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:59.217Z,1516742279.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:17:59.625Z,1516742279.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:00.025Z,1516742280.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:00.418Z,1516742280.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:00.813Z,1516742280.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:01.216Z,1516742281.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:01.622Z,1516742281.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:02.032Z,1516742282.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:02.424Z,1516742282.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:02.817Z,1516742282.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:03.221Z,1516742283.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:03.629Z,1516742283.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:04.029Z,1516742284.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:04.418Z,1516742284.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:04.796Z,1516742284.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:05.201Z,1516742285.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:05.624Z,1516742285.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:06.021Z,1516742286.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:06.425Z,1516742286.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:06.829Z,1516742286.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:07.200Z,1516742287.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:07.637Z,1516742287.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:08.027Z,1516742288.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:08.027Z,1516742288.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 359 2018-01-23T21:18:08.027Z,1516742288.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:18:08.029Z,1516742288.029 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:08.029Z,1516742288.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 359 2018-01-23T21:18:08.029Z,1516742288.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:18:08.042Z,1516742288.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:18:08.042Z,1516742288.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:18:08.495Z,1516742288.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:18:08.495Z,1516742288.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 359 2018-01-23T21:18:08.496Z,1516742288.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:18:08.496Z,1516742288.496 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 359 2018-01-23T21:18:08.803Z,1516742288.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:18:08.803Z,1516742288.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:18:08.803Z,1516742288.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:18:08.804Z,1516742288.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:18:08.804Z,1516742288.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:18:08.805Z,1516742288.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:18:09.202Z,1516742289.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:18:09.203Z,1516742289.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:09.606Z,1516742289.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:18:09.607Z,1516742289.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:10.010Z,1516742290.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:18:10.011Z,1516742290.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:10.406Z,1516742290.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:18:10.407Z,1516742290.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:10.804Z,1516742290.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:18:10.805Z,1516742290.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:11.201Z,1516742291.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:18:11.202Z,1516742291.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:11.621Z,1516742291.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:18:11.622Z,1516742291.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:12.013Z,1516742292.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:18:12.014Z,1516742292.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:12.412Z,1516742292.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:18:12.413Z,1516742292.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:12.805Z,1516742292.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:18:12.806Z,1516742292.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:13.203Z,1516742293.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:18:13.204Z,1516742293.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:13.608Z,1516742293.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:18:13.609Z,1516742293.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:14.009Z,1516742294.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:18:14.010Z,1516742294.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:14.410Z,1516742294.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:18:14.411Z,1516742294.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:14.809Z,1516742294.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:18:14.810Z,1516742294.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:15.205Z,1516742295.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:18:15.206Z,1516742295.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:15.618Z,1516742295.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:18:15.619Z,1516742295.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:18.710Z,1516742298.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T21:18:18.711Z,1516742298.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:18.852Z,1516742298.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:18:18.853Z,1516742298.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:19.193Z,1516742299.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:18:19.194Z,1516742299.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:19.596Z,1516742299.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:18:19.597Z,1516742299.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:19.975Z,1516742299.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s. 2018-01-23T21:18:19.976Z,1516742299.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:20.374Z,1516742300.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s. 2018-01-23T21:18:20.375Z,1516742300.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:20.781Z,1516742300.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:18:20.782Z,1516742300.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:21.181Z,1516742301.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:18:21.182Z,1516742301.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:21.607Z,1516742301.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:18:21.608Z,1516742301.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:21.975Z,1516742301.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s. 2018-01-23T21:18:21.976Z,1516742301.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:22.374Z,1516742302.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s. 2018-01-23T21:18:22.375Z,1516742302.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:22.774Z,1516742302.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s. 2018-01-23T21:18:22.776Z,1516742302.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:23.176Z,1516742303.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s. 2018-01-23T21:18:23.177Z,1516742303.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:23.573Z,1516742303.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s. 2018-01-23T21:18:23.574Z,1516742303.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:23.985Z,1516742303.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:18:23.985Z,1516742303.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:24.385Z,1516742304.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:18:24.386Z,1516742304.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:24.784Z,1516742304.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:18:24.785Z,1516742304.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:25.178Z,1516742305.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:18:25.179Z,1516742305.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:25.575Z,1516742305.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T21:18:25.576Z,1516742305.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:25.976Z,1516742305.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T21:18:25.976Z,1516742305.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:26.374Z,1516742306.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T21:18:26.375Z,1516742306.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:26.781Z,1516742306.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:18:26.782Z,1516742306.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:27.184Z,1516742307.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T21:18:27.185Z,1516742307.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:27.584Z,1516742307.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:18:27.585Z,1516742307.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:27.976Z,1516742307.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s. 2018-01-23T21:18:27.977Z,1516742307.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:28.381Z,1516742308.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:28.775Z,1516742308.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:29.177Z,1516742309.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:29.574Z,1516742309.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:29.985Z,1516742309.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:30.386Z,1516742310.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:30.785Z,1516742310.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:31.179Z,1516742311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:31.576Z,1516742311.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:31.977Z,1516742311.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:32.376Z,1516742312.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:32.789Z,1516742312.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:33.189Z,1516742313.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:33.583Z,1516742313.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:33.977Z,1516742313.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:34.376Z,1516742314.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:34.775Z,1516742314.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:35.177Z,1516742315.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:35.576Z,1516742315.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:36.011Z,1516742316.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:36.381Z,1516742316.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:36.788Z,1516742316.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:37.177Z,1516742317.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:37.577Z,1516742317.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:37.985Z,1516742317.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:38.381Z,1516742318.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:38.786Z,1516742318.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:39.212Z,1516742319.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:39.589Z,1516742319.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:39.976Z,1516742319.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:40.375Z,1516742320.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:40.778Z,1516742320.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:41.184Z,1516742321.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:41.579Z,1516742321.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:41.985Z,1516742321.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:42.389Z,1516742322.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:42.785Z,1516742322.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:43.177Z,1516742323.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:43.585Z,1516742323.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:43.978Z,1516742323.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:44.377Z,1516742324.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:44.786Z,1516742324.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:45.185Z,1516742325.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:45.589Z,1516742325.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:45.976Z,1516742325.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:46.381Z,1516742326.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:46.781Z,1516742326.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:47.180Z,1516742327.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:47.583Z,1516742327.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:47.987Z,1516742327.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:48.390Z,1516742328.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:48.786Z,1516742328.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:49.181Z,1516742329.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:49.588Z,1516742329.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:49.978Z,1516742329.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:50.384Z,1516742330.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:50.790Z,1516742330.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:51.197Z,1516742331.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:51.597Z,1516742331.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:51.980Z,1516742331.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:52.378Z,1516742332.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:52.784Z,1516742332.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:53.181Z,1516742333.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:53.584Z,1516742333.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:53.990Z,1516742333.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:54.395Z,1516742334.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:54.793Z,1516742334.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:55.177Z,1516742335.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:55.584Z,1516742335.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:55.982Z,1516742335.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:56.388Z,1516742336.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:56.795Z,1516742336.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:57.187Z,1516742337.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:57.588Z,1516742337.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:57.988Z,1516742337.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:58.381Z,1516742338.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:58.785Z,1516742338.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:59.198Z,1516742339.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:59.588Z,1516742339.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:18:59.986Z,1516742339.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:00.396Z,1516742340.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:00.786Z,1516742340.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:01.189Z,1516742341.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:01.589Z,1516742341.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:01.983Z,1516742341.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:02.387Z,1516742342.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:02.800Z,1516742342.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:03.191Z,1516742343.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:03.589Z,1516742343.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:03.985Z,1516742343.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:04.376Z,1516742344.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:04.791Z,1516742344.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:05.168Z,1516742345.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:05.565Z,1516742345.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:05.993Z,1516742345.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:06.403Z,1516742346.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:06.794Z,1516742346.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:07.201Z,1516742347.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:07.578Z,1516742347.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:07.977Z,1516742347.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:08.385Z,1516742348.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:08.810Z,1516742348.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:09.186Z,1516742349.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:09.590Z,1516742349.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:09.989Z,1516742349.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:10.385Z,1516742350.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:10.782Z,1516742350.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:11.196Z,1516742351.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:11.585Z,1516742351.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:11.986Z,1516742351.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:12.401Z,1516742352.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:12.791Z,1516742352.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:13.190Z,1516742353.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:13.584Z,1516742353.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:13.987Z,1516742353.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:14.386Z,1516742354.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:14.389Z,1516742354.389 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-01-23T21:19:14.390Z,1516742354.390 [Default:CheckIn:C.Wait] Stopped 2018-01-23T21:19:14.390Z,1516742354.390 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-01-23T21:19:14.390Z,1516742354.390 [Default:CheckIn:D] Running Loop=1 2018-01-23T21:19:14.800Z,1516742354.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:14.804Z,1516742354.804 [Default:CheckIn:D] Stopped 2018-01-23T21:19:14.804Z,1516742354.804 [Default:CheckIn:E] Running Loop=1 2018-01-23T21:19:15.198Z,1516742355.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:15.202Z,1516742355.202 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1081.379036 min 2018-01-23T21:19:15.202Z,1516742355.202 [Default:CheckIn:E] Stopped 2018-01-23T21:19:15.202Z,1516742355.202 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-01-23T21:19:15.202Z,1516742355.202 [Default:CheckIn] Stopped 2018-01-23T21:19:15.202Z,1516742355.202 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-01-23T21:19:15.204Z,1516742355.204 [Default:CheckIn](INFO): Running loop #106 2018-01-23T21:19:15.204Z,1516742355.204 [Default:CheckIn] Running Loop=106 2018-01-23T21:19:15.204Z,1516742355.204 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-01-23T21:19:15.204Z,1516742355.204 [Default:CheckIn:Read_GPS] Running Loop=1 2018-01-23T21:19:15.597Z,1516742355.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:15.988Z,1516742355.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:19.066Z,1516742359.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:19.196Z,1516742359.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:19.568Z,1516742359.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:19.969Z,1516742359.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:20.386Z,1516742360.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:20.760Z,1516742360.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:21.160Z,1516742361.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:21.565Z,1516742361.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:21.985Z,1516742361.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:22.395Z,1516742362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:22.773Z,1516742362.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:23.160Z,1516742363.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:23.567Z,1516742363.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:23.964Z,1516742363.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:24.358Z,1516742364.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:24.768Z,1516742364.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:25.189Z,1516742365.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:25.576Z,1516742365.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:25.965Z,1516742365.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:26.358Z,1516742366.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:26.793Z,1516742366.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:27.173Z,1516742367.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:27.577Z,1516742367.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:27.966Z,1516742367.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:28.365Z,1516742368.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:28.771Z,1516742368.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:29.173Z,1516742369.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:29.574Z,1516742369.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:29.980Z,1516742369.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:30.365Z,1516742370.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:30.771Z,1516742370.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:31.168Z,1516742371.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:31.592Z,1516742371.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:31.970Z,1516742371.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:32.367Z,1516742372.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:32.771Z,1516742372.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:33.195Z,1516742373.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:33.567Z,1516742373.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:33.967Z,1516742373.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:34.368Z,1516742374.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:34.777Z,1516742374.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:35.169Z,1516742375.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:35.574Z,1516742375.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:35.964Z,1516742375.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:36.363Z,1516742376.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:36.769Z,1516742376.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:37.180Z,1516742377.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:37.573Z,1516742377.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:37.977Z,1516742377.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:38.363Z,1516742378.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:38.780Z,1516742378.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:39.177Z,1516742379.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:39.581Z,1516742379.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:39.961Z,1516742379.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:40.369Z,1516742380.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:40.774Z,1516742380.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:41.170Z,1516742381.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:41.579Z,1516742381.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:41.963Z,1516742381.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:42.372Z,1516742382.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:42.771Z,1516742382.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:43.171Z,1516742383.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:43.567Z,1516742383.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:43.974Z,1516742383.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:44.365Z,1516742384.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:44.766Z,1516742384.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:45.188Z,1516742385.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:45.567Z,1516742385.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:45.966Z,1516742385.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:46.369Z,1516742386.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:46.770Z,1516742386.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:47.176Z,1516742387.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:47.582Z,1516742387.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:47.965Z,1516742387.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:48.349Z,1516742388.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:48.788Z,1516742388.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:49.185Z,1516742389.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:49.585Z,1516742389.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:49.977Z,1516742389.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:50.361Z,1516742390.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:50.786Z,1516742390.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:51.170Z,1516742391.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:51.581Z,1516742391.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:51.959Z,1516742391.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:52.360Z,1516742392.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:52.772Z,1516742392.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:53.177Z,1516742393.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:53.573Z,1516742393.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:53.964Z,1516742393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:54.364Z,1516742394.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:54.767Z,1516742394.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:55.169Z,1516742395.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:55.566Z,1516742395.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:55.959Z,1516742395.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:56.363Z,1516742396.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:56.767Z,1516742396.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:57.170Z,1516742397.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:57.567Z,1516742397.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:57.963Z,1516742397.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:58.367Z,1516742398.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:58.766Z,1516742398.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:59.169Z,1516742399.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:59.565Z,1516742399.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:19:59.963Z,1516742399.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:00.363Z,1516742400.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:00.765Z,1516742400.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:01.168Z,1516742401.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:01.578Z,1516742401.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:01.972Z,1516742401.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:02.365Z,1516742402.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:02.765Z,1516742402.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:03.170Z,1516742403.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:03.567Z,1516742403.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:03.975Z,1516742403.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:04.371Z,1516742404.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:04.773Z,1516742404.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:05.167Z,1516742405.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:05.569Z,1516742405.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:05.969Z,1516742405.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:06.348Z,1516742406.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:06.747Z,1516742406.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:07.176Z,1516742407.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:07.583Z,1516742407.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:07.984Z,1516742407.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:08.383Z,1516742408.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:08.777Z,1516742408.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:09.152Z,1516742409.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:09.557Z,1516742409.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:09.962Z,1516742409.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:10.361Z,1516742410.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:10.786Z,1516742410.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:11.154Z,1516742411.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:11.557Z,1516742411.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:11.955Z,1516742411.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:12.365Z,1516742412.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:12.759Z,1516742412.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:13.165Z,1516742413.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:13.562Z,1516742413.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:13.968Z,1516742413.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:14.356Z,1516742414.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:14.755Z,1516742414.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:15.156Z,1516742415.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:15.555Z,1516742415.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:15.965Z,1516742415.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:16.362Z,1516742416.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:19.465Z,1516742419.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:19.601Z,1516742419.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:19.964Z,1516742419.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:20.365Z,1516742420.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:20.762Z,1516742420.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:21.166Z,1516742421.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:21.570Z,1516742421.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:21.965Z,1516742421.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:22.357Z,1516742422.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:22.765Z,1516742422.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:23.156Z,1516742423.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:23.560Z,1516742423.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:23.969Z,1516742423.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:24.369Z,1516742424.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:24.800Z,1516742424.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:25.161Z,1516742425.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:25.556Z,1516742425.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:25.973Z,1516742425.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:26.369Z,1516742426.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:26.767Z,1516742426.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:27.169Z,1516742427.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:27.571Z,1516742427.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:27.976Z,1516742427.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:28.368Z,1516742428.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:28.769Z,1516742428.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:29.164Z,1516742429.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:29.576Z,1516742429.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:29.974Z,1516742429.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:30.380Z,1516742430.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:30.776Z,1516742430.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:31.146Z,1516742431.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:31.548Z,1516742431.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:31.955Z,1516742431.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:32.353Z,1516742432.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:32.754Z,1516742432.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:33.162Z,1516742433.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:33.565Z,1516742433.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:33.970Z,1516742433.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:34.360Z,1516742434.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:34.755Z,1516742434.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:35.155Z,1516742435.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:35.560Z,1516742435.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:35.963Z,1516742435.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:36.361Z,1516742436.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:36.764Z,1516742436.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:37.155Z,1516742437.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:37.554Z,1516742437.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:37.964Z,1516742437.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:38.357Z,1516742438.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:38.754Z,1516742438.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:39.161Z,1516742439.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:39.565Z,1516742439.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:39.969Z,1516742439.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:40.359Z,1516742440.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:40.756Z,1516742440.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:41.156Z,1516742441.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:41.561Z,1516742441.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:41.963Z,1516742441.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:42.361Z,1516742442.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:42.761Z,1516742442.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:43.157Z,1516742443.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:43.555Z,1516742443.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:43.964Z,1516742443.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:44.362Z,1516742444.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:44.759Z,1516742444.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:45.172Z,1516742445.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:45.566Z,1516742445.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:45.972Z,1516742445.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:46.361Z,1516742446.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:46.765Z,1516742446.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:47.159Z,1516742447.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:47.560Z,1516742447.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:47.969Z,1516742447.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:48.369Z,1516742448.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:48.772Z,1516742448.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:49.164Z,1516742449.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:49.559Z,1516742449.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:49.561Z,1516742449.561 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:49.561Z,1516742449.561 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 360 2018-01-23T21:20:49.561Z,1516742449.561 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:20:49.573Z,1516742449.573 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:20:49.965Z,1516742449.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:49.977Z,1516742449.977 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:20:49.977Z,1516742449.977 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 360 2018-01-23T21:20:50.356Z,1516742450.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:50.358Z,1516742450.358 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:20:50.358Z,1516742450.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:20:50.359Z,1516742450.359 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:20:50.761Z,1516742450.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:51.166Z,1516742451.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:51.589Z,1516742451.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:51.966Z,1516742451.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:52.364Z,1516742452.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:52.765Z,1516742452.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:53.164Z,1516742453.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:53.568Z,1516742453.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:53.970Z,1516742453.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:54.369Z,1516742454.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:54.766Z,1516742454.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:55.153Z,1516742455.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:55.567Z,1516742455.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:55.968Z,1516742455.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:56.346Z,1516742456.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:56.769Z,1516742456.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:57.180Z,1516742457.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:57.574Z,1516742457.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:57.976Z,1516742457.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:58.380Z,1516742458.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:58.757Z,1516742458.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:59.156Z,1516742459.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:59.555Z,1516742459.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:20:59.962Z,1516742459.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:00.366Z,1516742460.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:00.770Z,1516742460.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:01.156Z,1516742461.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:01.556Z,1516742461.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:01.961Z,1516742461.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:02.367Z,1516742462.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:02.757Z,1516742462.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:03.170Z,1516742463.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:03.569Z,1516742463.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:03.967Z,1516742463.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:04.359Z,1516742464.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:04.769Z,1516742464.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:05.163Z,1516742465.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:05.565Z,1516742465.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:05.972Z,1516742465.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:06.374Z,1516742466.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:06.769Z,1516742466.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:07.170Z,1516742467.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:07.568Z,1516742467.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:07.969Z,1516742467.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:08.364Z,1516742468.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:08.769Z,1516742468.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:09.181Z,1516742469.181 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:09.182Z,1516742469.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 360 2018-01-23T21:21:09.182Z,1516742469.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:21:09.184Z,1516742469.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:09.184Z,1516742469.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 360 2018-01-23T21:21:09.184Z,1516742469.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:21:09.197Z,1516742469.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:21:09.197Z,1516742469.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:21:09.586Z,1516742469.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:21:09.586Z,1516742469.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 360 2018-01-23T21:21:09.587Z,1516742469.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:21:09.587Z,1516742469.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 360 2018-01-23T21:21:09.976Z,1516742469.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:21:09.976Z,1516742469.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:21:09.976Z,1516742469.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:21:09.977Z,1516742469.977 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:21:09.977Z,1516742469.977 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:21:09.978Z,1516742469.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:21:10.375Z,1516742470.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:21:10.376Z,1516742470.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:10.760Z,1516742470.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:21:10.761Z,1516742470.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:11.154Z,1516742471.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:21:11.156Z,1516742471.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:11.565Z,1516742471.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:21:11.566Z,1516742471.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:11.959Z,1516742471.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:21:11.960Z,1516742471.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:12.362Z,1516742472.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:21:12.363Z,1516742472.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:12.758Z,1516742472.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:21:12.759Z,1516742472.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:13.154Z,1516742473.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:21:13.156Z,1516742473.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:13.554Z,1516742473.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:21:13.555Z,1516742473.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:13.957Z,1516742473.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:21:13.958Z,1516742473.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:14.355Z,1516742474.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:21:14.356Z,1516742474.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:14.753Z,1516742474.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:21:14.754Z,1516742474.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:15.157Z,1516742475.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:21:15.158Z,1516742475.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:15.562Z,1516742475.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:21:15.563Z,1516742475.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:15.960Z,1516742475.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:21:15.961Z,1516742475.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:16.355Z,1516742476.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:21:16.356Z,1516742476.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:16.761Z,1516742476.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:21:16.762Z,1516742476.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:19.860Z,1516742479.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s. 2018-01-23T21:21:19.861Z,1516742479.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:20.004Z,1516742480.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:21:20.005Z,1516742480.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:20.362Z,1516742480.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:21:20.363Z,1516742480.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:20.758Z,1516742480.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:21:20.760Z,1516742480.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:21.157Z,1516742481.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T21:21:21.158Z,1516742481.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:21.556Z,1516742481.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T21:21:21.557Z,1516742481.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:21.950Z,1516742481.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:21:21.951Z,1516742481.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:22.355Z,1516742482.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:21:22.356Z,1516742482.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:22.756Z,1516742482.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:21:22.757Z,1516742482.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:23.157Z,1516742483.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T21:21:23.158Z,1516742483.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:23.560Z,1516742483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T21:21:23.560Z,1516742483.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:23.955Z,1516742483.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T21:21:23.956Z,1516742483.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:24.341Z,1516742484.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T21:21:24.342Z,1516742484.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:24.755Z,1516742484.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T21:21:24.756Z,1516742484.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:25.157Z,1516742485.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:21:25.158Z,1516742485.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:25.532Z,1516742485.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:21:25.533Z,1516742485.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:25.962Z,1516742485.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:21:25.963Z,1516742485.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:26.369Z,1516742486.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:21:26.370Z,1516742486.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:26.757Z,1516742486.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T21:21:26.758Z,1516742486.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:27.136Z,1516742487.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T21:21:27.137Z,1516742487.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:27.534Z,1516742487.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T21:21:27.535Z,1516742487.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:27.962Z,1516742487.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:21:27.967Z,1516742487.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:28.369Z,1516742488.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s. 2018-01-23T21:21:28.370Z,1516742488.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:28.775Z,1516742488.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:21:28.776Z,1516742488.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:29.143Z,1516742489.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T21:21:29.144Z,1516742489.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:29.543Z,1516742489.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:29.949Z,1516742489.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:30.346Z,1516742490.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:30.750Z,1516742490.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:31.144Z,1516742491.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:31.541Z,1516742491.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:31.950Z,1516742491.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:32.373Z,1516742492.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:32.774Z,1516742492.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:33.183Z,1516742493.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:33.550Z,1516742493.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:33.952Z,1516742493.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:34.360Z,1516742494.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:34.805Z,1516742494.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:35.200Z,1516742495.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:35.565Z,1516742495.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:35.975Z,1516742495.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:36.371Z,1516742496.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:36.773Z,1516742496.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:37.142Z,1516742497.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:37.589Z,1516742497.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:37.977Z,1516742497.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:38.398Z,1516742498.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:38.807Z,1516742498.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:39.176Z,1516742499.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:39.590Z,1516742499.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:39.977Z,1516742499.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:40.374Z,1516742500.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:40.797Z,1516742500.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:41.157Z,1516742501.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:41.592Z,1516742501.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:41.985Z,1516742501.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:42.381Z,1516742502.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:42.859Z,1516742502.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:43.180Z,1516742503.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:43.555Z,1516742503.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:44.081Z,1516742504.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:44.423Z,1516742504.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:44.785Z,1516742504.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:45.195Z,1516742505.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:45.614Z,1516742505.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:45.985Z,1516742505.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:46.413Z,1516742506.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:46.790Z,1516742506.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:47.181Z,1516742507.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:47.618Z,1516742507.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:48.068Z,1516742508.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:48.381Z,1516742508.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:48.858Z,1516742508.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:49.196Z,1516742509.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:49.574Z,1516742509.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:49.984Z,1516742509.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:50.460Z,1516742510.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:50.788Z,1516742510.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:51.172Z,1516742511.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:51.634Z,1516742511.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:52.013Z,1516742512.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:52.393Z,1516742512.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:52.791Z,1516742512.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:53.191Z,1516742513.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:53.579Z,1516742513.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:53.980Z,1516742513.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:54.349Z,1516742514.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:54.753Z,1516742514.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:55.146Z,1516742515.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:55.588Z,1516742515.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:55.954Z,1516742515.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:56.356Z,1516742516.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:56.764Z,1516742516.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:57.155Z,1516742517.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:57.612Z,1516742517.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:57.962Z,1516742517.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:58.362Z,1516742518.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:58.772Z,1516742518.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:59.137Z,1516742519.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:21:59.673Z,1516742519.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:00.017Z,1516742520.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:00.413Z,1516742520.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:00.821Z,1516742520.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:01.178Z,1516742521.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:01.691Z,1516742521.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:01.965Z,1516742521.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:02.408Z,1516742522.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:02.868Z,1516742522.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:03.174Z,1516742523.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:03.607Z,1516742523.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:03.965Z,1516742523.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:04.409Z,1516742524.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:04.817Z,1516742524.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:05.213Z,1516742525.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:05.625Z,1516742525.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:06.033Z,1516742526.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:06.336Z,1516742526.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:06.771Z,1516742526.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:07.274Z,1516742527.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:07.585Z,1516742527.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:07.997Z,1516742527.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:08.398Z,1516742528.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:08.757Z,1516742528.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:09.161Z,1516742529.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:09.573Z,1516742529.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:09.964Z,1516742529.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:10.397Z,1516742530.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:10.813Z,1516742530.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:11.176Z,1516742531.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:11.570Z,1516742531.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:12.022Z,1516742532.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:12.397Z,1516742532.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:12.827Z,1516742532.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:13.196Z,1516742533.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:13.571Z,1516742533.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:13.969Z,1516742533.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:14.388Z,1516742534.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:14.778Z,1516742534.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:15.176Z,1516742535.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:15.590Z,1516742535.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:15.989Z,1516742535.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:16.366Z,1516742536.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:16.816Z,1516742536.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:17.171Z,1516742537.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:24.532Z,1516742544.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:24.747Z,1516742544.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:25.092Z,1516742545.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:25.523Z,1516742545.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:25.872Z,1516742545.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:26.376Z,1516742546.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:26.684Z,1516742546.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:27.041Z,1516742547.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x15309 got:0x38854 2018-01-23T21:22:27.077Z,1516742547.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:27.540Z,1516742547.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:27.889Z,1516742547.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:28.302Z,1516742548.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:28.684Z,1516742548.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:29.078Z,1516742549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:29.500Z,1516742549.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:29.893Z,1516742549.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:30.317Z,1516742550.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:30.719Z,1516742550.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:31.077Z,1516742551.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:31.552Z,1516742551.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:31.893Z,1516742551.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:32.285Z,1516742552.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:32.683Z,1516742552.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:33.115Z,1516742553.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:33.549Z,1516742553.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:33.893Z,1516742553.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:34.289Z,1516742554.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:34.689Z,1516742554.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:35.111Z,1516742555.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:35.477Z,1516742555.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:35.880Z,1516742555.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:36.316Z,1516742556.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:36.721Z,1516742556.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:37.125Z,1516742557.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:37.500Z,1516742557.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:37.881Z,1516742557.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:38.273Z,1516742558.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:38.676Z,1516742558.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:39.128Z,1516742559.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:39.525Z,1516742559.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:39.905Z,1516742559.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:40.269Z,1516742560.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:40.690Z,1516742560.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:41.145Z,1516742561.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:41.485Z,1516742561.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:41.924Z,1516742561.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:42.314Z,1516742562.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:42.673Z,1516742562.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:43.123Z,1516742563.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:43.478Z,1516742563.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:43.888Z,1516742563.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:44.362Z,1516742564.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:44.734Z,1516742564.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:45.096Z,1516742565.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:45.523Z,1516742565.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:45.877Z,1516742565.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:46.268Z,1516742566.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:46.740Z,1516742566.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:47.114Z,1516742567.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:47.577Z,1516742567.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:47.893Z,1516742567.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:48.332Z,1516742568.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:48.676Z,1516742568.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:49.056Z,1516742569.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:49.488Z,1516742569.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:49.898Z,1516742569.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:50.257Z,1516742570.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:50.658Z,1516742570.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:51.068Z,1516742571.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:51.465Z,1516742571.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:51.860Z,1516742571.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:52.252Z,1516742572.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:52.690Z,1516742572.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:53.074Z,1516742573.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:53.472Z,1516742573.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:53.867Z,1516742573.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:54.241Z,1516742574.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:54.721Z,1516742574.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:55.056Z,1516742575.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:55.462Z,1516742575.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:55.846Z,1516742575.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:56.280Z,1516742576.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:56.659Z,1516742576.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:57.068Z,1516742577.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:57.506Z,1516742577.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:57.855Z,1516742577.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:58.245Z,1516742578.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:58.653Z,1516742578.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:59.054Z,1516742579.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:59.457Z,1516742579.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:22:59.861Z,1516742579.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:00.257Z,1516742580.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:00.655Z,1516742580.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:01.061Z,1516742581.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:01.467Z,1516742581.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:01.858Z,1516742581.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:02.256Z,1516742582.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:02.634Z,1516742582.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:03.059Z,1516742583.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:03.469Z,1516742583.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:03.870Z,1516742583.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:04.272Z,1516742584.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:04.665Z,1516742584.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:05.074Z,1516742585.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:05.443Z,1516742585.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:05.849Z,1516742585.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:06.330Z,1516742586.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:06.727Z,1516742586.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:07.064Z,1516742587.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:07.456Z,1516742587.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:07.851Z,1516742587.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:08.265Z,1516742588.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:08.648Z,1516742588.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:09.051Z,1516742589.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:09.455Z,1516742589.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:09.862Z,1516742589.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:10.255Z,1516742590.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:10.651Z,1516742590.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:11.047Z,1516742591.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:11.451Z,1516742591.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:11.861Z,1516742591.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:12.274Z,1516742592.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:12.669Z,1516742592.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:13.129Z,1516742593.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:13.450Z,1516742593.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:13.857Z,1516742593.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:14.256Z,1516742594.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:14.658Z,1516742594.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:15.066Z,1516742595.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:15.479Z,1516742595.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:15.878Z,1516742595.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:16.277Z,1516742596.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:16.643Z,1516742596.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:17.044Z,1516742597.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:17.474Z,1516742597.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:20.881Z,1516742600.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:21.036Z,1516742601.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:21.358Z,1516742601.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:21.760Z,1516742601.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:22.150Z,1516742602.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:22.553Z,1516742602.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:22.953Z,1516742602.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:23.426Z,1516742603.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:23.761Z,1516742603.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:24.155Z,1516742604.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:24.537Z,1516742604.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:24.941Z,1516742604.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:25.397Z,1516742605.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:25.760Z,1516742605.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:26.161Z,1516742606.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:26.597Z,1516742606.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:26.961Z,1516742606.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:27.368Z,1516742607.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:27.773Z,1516742607.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:28.149Z,1516742608.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:28.557Z,1516742608.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:28.964Z,1516742608.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:29.358Z,1516742609.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:29.761Z,1516742609.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:30.159Z,1516742610.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:30.558Z,1516742610.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:30.988Z,1516742610.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:31.404Z,1516742611.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:31.775Z,1516742611.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:32.185Z,1516742612.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:32.580Z,1516742612.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:32.996Z,1516742612.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:33.396Z,1516742613.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:33.801Z,1516742613.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:34.177Z,1516742614.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:34.596Z,1516742614.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:34.948Z,1516742614.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:35.351Z,1516742615.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:35.754Z,1516742615.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:36.230Z,1516742616.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:36.545Z,1516742616.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:37.010Z,1516742617.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:37.354Z,1516742617.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:37.812Z,1516742617.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:38.171Z,1516742618.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:38.568Z,1516742618.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:39.007Z,1516742619.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:39.349Z,1516742619.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:39.770Z,1516742619.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:40.151Z,1516742620.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:40.554Z,1516742620.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:40.953Z,1516742620.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:41.383Z,1516742621.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:41.753Z,1516742621.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:42.155Z,1516742622.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:42.561Z,1516742622.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:42.953Z,1516742622.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:43.349Z,1516742623.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:43.817Z,1516742623.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:44.161Z,1516742624.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:44.558Z,1516742624.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:44.961Z,1516742624.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:45.350Z,1516742625.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:45.807Z,1516742625.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:46.158Z,1516742626.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:46.606Z,1516742626.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:47.000Z,1516742627.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:47.391Z,1516742627.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:47.761Z,1516742627.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:48.165Z,1516742628.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:48.559Z,1516742628.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:48.957Z,1516742628.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:49.349Z,1516742629.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:49.790Z,1516742629.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:50.161Z,1516742630.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:50.557Z,1516742630.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:50.559Z,1516742630.559 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:50.560Z,1516742630.560 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 361 2018-01-23T21:23:50.560Z,1516742630.560 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:23:50.591Z,1516742630.591 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:23:50.996Z,1516742630.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:51.026Z,1516742631.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:23:51.026Z,1516742631.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 361 2018-01-23T21:23:51.350Z,1516742631.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:51.352Z,1516742631.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:23:51.352Z,1516742631.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:23:51.352Z,1516742631.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:23:51.862Z,1516742631.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:52.192Z,1516742632.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:52.630Z,1516742632.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:52.964Z,1516742632.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:53.361Z,1516742633.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:53.765Z,1516742633.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:54.171Z,1516742634.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:54.632Z,1516742634.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:54.969Z,1516742634.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:55.352Z,1516742635.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:55.774Z,1516742635.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:56.154Z,1516742636.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:56.554Z,1516742636.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:56.951Z,1516742636.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:57.349Z,1516742637.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:57.753Z,1516742637.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:58.153Z,1516742638.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:58.562Z,1516742638.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:59.001Z,1516742639.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:59.368Z,1516742639.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:23:59.800Z,1516742639.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:00.233Z,1516742640.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:00.593Z,1516742640.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:01.016Z,1516742641.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:01.431Z,1516742641.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:01.802Z,1516742641.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:02.196Z,1516742642.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:02.644Z,1516742642.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:02.978Z,1516742642.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:03.370Z,1516742643.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:03.747Z,1516742643.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:04.171Z,1516742644.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:04.703Z,1516742644.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:04.966Z,1516742644.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:05.383Z,1516742645.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:05.773Z,1516742645.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:06.173Z,1516742646.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:06.570Z,1516742646.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:07.002Z,1516742647.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:07.354Z,1516742647.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:07.756Z,1516742647.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:08.163Z,1516742648.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:08.568Z,1516742648.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:08.969Z,1516742648.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:09.357Z,1516742649.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:09.765Z,1516742649.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:10.160Z,1516742650.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:10.161Z,1516742650.161 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 361 2018-01-23T21:24:10.161Z,1516742650.161 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:24:10.162Z,1516742650.162 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:10.163Z,1516742650.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 361 2018-01-23T21:24:10.163Z,1516742650.163 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:24:10.176Z,1516742650.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:24:10.176Z,1516742650.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:24:10.612Z,1516742650.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:24:10.612Z,1516742650.612 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 361 2018-01-23T21:24:10.613Z,1516742650.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:24:10.613Z,1516742650.613 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 361 2018-01-23T21:24:10.961Z,1516742650.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:24:10.961Z,1516742650.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:24:10.961Z,1516742650.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:24:10.962Z,1516742650.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:24:10.962Z,1516742650.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:24:10.963Z,1516742650.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:24:11.337Z,1516742651.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:24:11.338Z,1516742651.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:11.742Z,1516742651.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:24:11.756Z,1516742651.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:12.144Z,1516742652.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:24:12.145Z,1516742652.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:12.565Z,1516742652.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:24:12.566Z,1516742652.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:13.016Z,1516742653.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s. 2018-01-23T21:24:13.017Z,1516742653.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:13.379Z,1516742653.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:24:13.380Z,1516742653.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:13.773Z,1516742653.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:24:13.774Z,1516742653.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:14.194Z,1516742654.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:24:14.195Z,1516742654.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:14.592Z,1516742654.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:24:14.593Z,1516742654.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:14.974Z,1516742654.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:24:14.979Z,1516742654.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:15.376Z,1516742655.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:24:15.377Z,1516742655.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:15.380Z,1516742655.380 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-01-23T21:19:15.2Z 2018-01-23T21:24:15.381Z,1516742655.381 [Default:CheckIn:Read_GPS] Stopped 2018-01-23T21:24:15.381Z,1516742655.381 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-01-23T21:24:15.774Z,1516742655.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:24:15.775Z,1516742655.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:19.935Z,1516742659.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s. 2018-01-23T21:24:19.936Z,1516742659.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:20.070Z,1516742660.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s. 2018-01-23T21:24:20.079Z,1516742660.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:27.493Z,1516742667.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s. 2018-01-23T21:24:27.494Z,1516742667.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:27.571Z,1516742667.571 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180123T031358/Courier0424.lzma 2018-01-23T21:24:27.654Z,1516742667.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s. 2018-01-23T21:24:27.664Z,1516742667.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:28.057Z,1516742668.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s. 2018-01-23T21:24:28.058Z,1516742668.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:28.366Z,1516742668.366 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Courier0424.lzma.bak 2018-01-23T21:24:28.366Z,1516742668.366 [DataOverHttps](INFO): SBD MOMSN=7756668 2018-01-23T21:24:28.457Z,1516742668.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s. 2018-01-23T21:24:28.458Z,1516742668.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:29.448Z,1516742669.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s. 2018-01-23T21:24:29.449Z,1516742669.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:29.626Z,1516742669.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s. 2018-01-23T21:24:29.631Z,1516742669.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:36.940Z,1516742676.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:37.124Z,1516742677.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:37.489Z,1516742677.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:37.935Z,1516742677.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:38.276Z,1516742678.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:38.693Z,1516742678.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:45.599Z,1516742685.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:45.657Z,1516742685.657 [CBIT](DEBUG): EFC running - data check-sum false 2018-01-23T21:24:45.725Z,1516742685.725 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20180123T031358/Express0425.lzma 2018-01-23T21:24:45.860Z,1516742685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:46.150Z,1516742686.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:46.493Z,1516742686.493 [DataOverHttps](INFO): Moved sent file to Logs/20180123T031358/Express0425.lzma.bak 2018-01-23T21:24:46.493Z,1516742686.493 [DataOverHttps](INFO): SBD MOMSN=7756670 2018-01-23T21:24:46.575Z,1516742686.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:47.574Z,1516742687.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:47.581Z,1516742687.581 [Default:CheckIn:Read_Iridium] Stopped 2018-01-23T21:24:47.581Z,1516742687.581 [Default:CheckIn:C.Wait] Running Loop=1 2018-01-23T21:24:47.581Z,1516742687.581 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-01-23T21:24:47.752Z,1516742687.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:54.857Z,1516742694.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:55.043Z,1516742695.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:55.386Z,1516742695.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:55.819Z,1516742695.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:56.198Z,1516742696.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:56.607Z,1516742696.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:57.051Z,1516742697.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:57.374Z,1516742697.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:57.787Z,1516742697.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:58.193Z,1516742698.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:58.596Z,1516742698.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:59.015Z,1516742699.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:59.429Z,1516742699.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:24:59.797Z,1516742699.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:00.180Z,1516742700.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:00.653Z,1516742700.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:00.965Z,1516742700.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:01.333Z,1516742701.333 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-01-23T21:25:01.333Z,1516742701.333 [NAL9602] Data Fault, FailCount= 4 2018-01-23T21:25:01.333Z,1516742701.333 [NAL9602](ERROR): Data Fault 2018-01-23T21:25:01.369Z,1516742701.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:01.406Z,1516742701.406 [CBIT](ERROR): Data Fault in component: NAL9602 2018-01-23T21:25:01.728Z,1516742701.728 [NAL9602](INFO): Powering down 2018-01-23T21:25:01.760Z,1516742701.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:02.159Z,1516742702.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:02.560Z,1516742702.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:02.573Z,1516742702.573 [CBIT](INFO): Clearing failed state for component NAL9602 2018-01-23T21:25:02.573Z,1516742702.573 [NAL9602] No Fault, FailCount= 4 2018-01-23T21:25:02.968Z,1516742702.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:03.357Z,1516742703.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:03.760Z,1516742703.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:04.176Z,1516742704.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:04.575Z,1516742704.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:04.969Z,1516742704.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:05.382Z,1516742705.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:05.773Z,1516742705.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:06.167Z,1516742706.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:06.607Z,1516742706.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:06.972Z,1516742706.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:07.372Z,1516742707.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:07.777Z,1516742707.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:08.187Z,1516742708.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:08.622Z,1516742708.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:09.023Z,1516742709.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:09.381Z,1516742709.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:09.788Z,1516742709.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:10.186Z,1516742710.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:10.593Z,1516742710.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:11.033Z,1516742711.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:11.388Z,1516742711.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:11.793Z,1516742711.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:12.222Z,1516742712.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:12.607Z,1516742712.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:12.970Z,1516742712.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:13.401Z,1516742713.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:13.802Z,1516742713.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:14.181Z,1516742714.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:14.601Z,1516742714.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:14.000Z,1516742715.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:15.400Z,1516742715.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:15.804Z,1516742715.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:16.204Z,1516742716.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:16.592Z,1516742716.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:17.000Z,1516742717.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:17.400Z,1516742717.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:17.788Z,1516742717.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:18.196Z,1516742718.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:18.610Z,1516742718.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:19.011Z,1516742719.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:19.424Z,1516742719.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:19.812Z,1516742719.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:20.170Z,1516742720.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:20.595Z,1516742720.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:21.005Z,1516742721.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:21.377Z,1516742721.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:21.819Z,1516742721.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:22.216Z,1516742722.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:22.581Z,1516742722.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:23.001Z,1516742723.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:23.385Z,1516742723.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:23.789Z,1516742723.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:24.262Z,1516742724.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:24.656Z,1516742724.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:24.981Z,1516742724.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:25.419Z,1516742725.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:25.809Z,1516742725.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:26.180Z,1516742726.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:26.593Z,1516742726.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:27.028Z,1516742727.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:27.393Z,1516742727.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:27.793Z,1516742727.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:28.198Z,1516742728.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:28.596Z,1516742728.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:29.005Z,1516742729.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:29.401Z,1516742729.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:29.789Z,1516742729.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:30.185Z,1516742730.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:30.635Z,1516742730.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:31.054Z,1516742731.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:31.406Z,1516742731.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:31.736Z,1516742731.736 [NAL9602](INFO): Powering up NAL9602 2018-01-23T21:25:31.769Z,1516742731.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:32.223Z,1516742732.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:32.616Z,1516742732.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:33.018Z,1516742733.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:33.395Z,1516742733.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:33.796Z,1516742733.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:34.227Z,1516742734.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:34.602Z,1516742734.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:34.999Z,1516742734.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:35.385Z,1516742735.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:35.794Z,1516742735.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:36.203Z,1516742736.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:36.592Z,1516742736.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:36.989Z,1516742736.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:37.387Z,1516742737.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:37.808Z,1516742737.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:38.187Z,1516742738.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:38.638Z,1516742738.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:39.011Z,1516742739.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:39.396Z,1516742739.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:39.829Z,1516742739.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:40.197Z,1516742740.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:40.659Z,1516742740.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:40.978Z,1516742740.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:41.410Z,1516742741.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:41.814Z,1516742741.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:42.208Z,1516742742.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:42.608Z,1516742742.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:42.932Z,1516742742.932 [NAL9602](INFO): NAL9602 initialized 2018-01-23T21:25:42.997Z,1516742742.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:43.421Z,1516742743.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:43.813Z,1516742743.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:44.207Z,1516742744.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:44.582Z,1516742744.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:44.981Z,1516742744.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:45.382Z,1516742745.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:45.780Z,1516742745.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:46.183Z,1516742746.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:46.586Z,1516742746.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:46.992Z,1516742746.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:47.384Z,1516742747.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:47.802Z,1516742747.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:48.178Z,1516742748.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:51.643Z,1516742751.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:51.808Z,1516742751.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:52.181Z,1516742752.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:52.551Z,1516742752.551 [PNI_TCM](ERROR): CRC does not match. Expected:0x36642 got:0x50624 2018-01-23T21:25:52.588Z,1516742752.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:52.980Z,1516742752.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:53.346Z,1516742753.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:53.782Z,1516742753.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:54.165Z,1516742754.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:54.585Z,1516742754.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:54.973Z,1516742754.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:55.363Z,1516742755.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:55.761Z,1516742755.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:56.154Z,1516742756.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:56.553Z,1516742756.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:56.954Z,1516742756.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:57.473Z,1516742757.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:57.778Z,1516742757.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:58.164Z,1516742758.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:58.577Z,1516742758.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:58.968Z,1516742758.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:59.336Z,1516742759.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:25:59.740Z,1516742759.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:00.144Z,1516742760.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:00.616Z,1516742760.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:00.967Z,1516742760.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:01.353Z,1516742761.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:01.746Z,1516742761.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:02.144Z,1516742762.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:02.560Z,1516742762.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:02.961Z,1516742762.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:03.348Z,1516742763.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:03.835Z,1516742763.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:04.161Z,1516742764.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:04.561Z,1516742764.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:05.019Z,1516742765.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:05.409Z,1516742765.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:05.799Z,1516742765.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:06.159Z,1516742766.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:06.576Z,1516742766.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:07.015Z,1516742767.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:07.414Z,1516742767.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:07.802Z,1516742767.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:08.185Z,1516742768.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:08.588Z,1516742768.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:08.962Z,1516742768.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:09.353Z,1516742769.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:09.809Z,1516742769.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:10.182Z,1516742770.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:10.555Z,1516742770.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:10.945Z,1516742770.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:11.345Z,1516742771.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:11.753Z,1516742771.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:12.156Z,1516742772.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:12.557Z,1516742772.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:12.976Z,1516742772.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:13.365Z,1516742773.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:13.757Z,1516742773.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:14.165Z,1516742774.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:14.561Z,1516742774.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:14.965Z,1516742774.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:15.344Z,1516742775.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:15.747Z,1516742775.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:16.235Z,1516742776.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:16.577Z,1516742776.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:16.949Z,1516742776.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:17.343Z,1516742777.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:17.753Z,1516742777.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:18.153Z,1516742778.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:18.554Z,1516742778.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:18.954Z,1516742778.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:19.373Z,1516742779.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:19.743Z,1516742779.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:20.153Z,1516742780.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:20.541Z,1516742780.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:20.943Z,1516742780.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:21.351Z,1516742781.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:21.751Z,1516742781.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:22.151Z,1516742782.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:22.553Z,1516742782.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:22.949Z,1516742782.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:23.345Z,1516742783.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:23.749Z,1516742783.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:24.153Z,1516742784.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:24.598Z,1516742784.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:24.960Z,1516742784.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:25.355Z,1516742785.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:25.743Z,1516742785.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:26.144Z,1516742786.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:26.550Z,1516742786.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:26.945Z,1516742786.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:27.349Z,1516742787.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:27.753Z,1516742787.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:28.153Z,1516742788.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:28.560Z,1516742788.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:28.953Z,1516742788.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:29.349Z,1516742789.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:29.745Z,1516742789.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:30.143Z,1516742790.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:30.584Z,1516742790.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:30.955Z,1516742790.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:31.355Z,1516742791.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:31.747Z,1516742791.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:32.146Z,1516742792.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:32.553Z,1516742792.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:32.948Z,1516742792.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:33.348Z,1516742793.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:33.754Z,1516742793.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:34.154Z,1516742794.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:34.555Z,1516742794.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:34.944Z,1516742794.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:35.346Z,1516742795.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:35.747Z,1516742795.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:36.145Z,1516742796.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:36.592Z,1516742796.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:36.966Z,1516742796.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:37.360Z,1516742797.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:37.764Z,1516742797.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:38.165Z,1516742798.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:38.537Z,1516742798.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:38.944Z,1516742798.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:39.340Z,1516742799.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:39.747Z,1516742799.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:40.154Z,1516742800.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:40.558Z,1516742800.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:40.953Z,1516742800.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:41.357Z,1516742801.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:41.745Z,1516742801.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:42.145Z,1516742802.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:42.635Z,1516742802.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:42.959Z,1516742802.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:43.365Z,1516742803.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:43.749Z,1516742803.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:44.146Z,1516742804.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:44.563Z,1516742804.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:44.969Z,1516742804.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:45.368Z,1516742805.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:45.744Z,1516742805.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:46.140Z,1516742806.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:46.566Z,1516742806.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:46.973Z,1516742806.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:47.363Z,1516742807.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:47.745Z,1516742807.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:48.141Z,1516742808.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:48.553Z,1516742808.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:51.688Z,1516742811.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:51.691Z,1516742811.691 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:51.691Z,1516742811.691 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 362 2018-01-23T21:26:51.691Z,1516742811.691 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault 2018-01-23T21:26:51.702Z,1516742811.702 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor 2018-01-23T21:26:51.837Z,1516742811.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:51.850Z,1516742811.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor 2018-01-23T21:26:51.850Z,1516742811.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 362 2018-01-23T21:26:52.173Z,1516742812.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:52.174Z,1516742812.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component. 2018-01-23T21:26:52.179Z,1516742812.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:26:52.179Z,1516742812.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:26:52.562Z,1516742812.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:52.958Z,1516742812.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:53.361Z,1516742813.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:53.763Z,1516742813.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:54.165Z,1516742814.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:54.563Z,1516742814.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:54.964Z,1516742814.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:55.385Z,1516742815.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:55.788Z,1516742815.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:56.209Z,1516742816.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:56.585Z,1516742816.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:56.985Z,1516742816.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:57.396Z,1516742817.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:57.790Z,1516742817.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:58.190Z,1516742818.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:58.562Z,1516742818.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:58.996Z,1516742818.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:59.372Z,1516742819.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:26:59.776Z,1516742819.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:00.168Z,1516742820.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:00.567Z,1516742820.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:00.970Z,1516742820.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:01.376Z,1516742821.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:01.782Z,1516742821.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:02.169Z,1516742822.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:02.569Z,1516742822.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:02.993Z,1516742822.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:03.375Z,1516742823.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:03.775Z,1516742823.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:04.181Z,1516742824.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:04.627Z,1516742824.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:04.978Z,1516742824.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:05.389Z,1516742825.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:05.762Z,1516742825.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:06.207Z,1516742826.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:06.612Z,1516742826.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:07.004Z,1516742827.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:07.408Z,1516742827.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:07.827Z,1516742827.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:08.203Z,1516742828.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:08.578Z,1516742828.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:08.989Z,1516742828.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:09.428Z,1516742829.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:09.781Z,1516742829.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:10.170Z,1516742830.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:10.599Z,1516742830.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:11.001Z,1516742831.001 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:11.001Z,1516742831.001 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 362 2018-01-23T21:27:11.002Z,1516742831.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-01-23T21:27:11.012Z,1516742831.012 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:11.012Z,1516742831.012 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 362 2018-01-23T21:27:11.012Z,1516742831.012 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-01-23T21:27:11.065Z,1516742831.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-01-23T21:27:11.065Z,1516742831.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-01-23T21:27:11.428Z,1516742831.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-01-23T21:27:11.428Z,1516742831.428 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 362 2018-01-23T21:27:11.428Z,1516742831.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-01-23T21:27:11.428Z,1516742831.428 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 362 2018-01-23T21:27:11.798Z,1516742831.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-01-23T21:27:11.799Z,1516742831.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:27:11.799Z,1516742831.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:27:11.799Z,1516742831.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-01-23T21:27:11.800Z,1516742831.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-01-23T21:27:11.800Z,1516742831.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-01-23T21:27:12.189Z,1516742832.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s. 2018-01-23T21:27:12.190Z,1516742832.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:12.601Z,1516742832.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s. 2018-01-23T21:27:12.602Z,1516742832.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:12.973Z,1516742832.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s. 2018-01-23T21:27:12.974Z,1516742832.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:13.378Z,1516742833.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s. 2018-01-23T21:27:13.400Z,1516742833.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:13.804Z,1516742833.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s. 2018-01-23T21:27:13.805Z,1516742833.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:14.210Z,1516742834.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s. 2018-01-23T21:27:14.232Z,1516742834.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:14.588Z,1516742834.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s. 2018-01-23T21:27:14.589Z,1516742834.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:15.005Z,1516742835.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s. 2018-01-23T21:27:15.006Z,1516742835.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:15.426Z,1516742835.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s. 2018-01-23T21:27:15.427Z,1516742835.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:15.786Z,1516742835.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s. 2018-01-23T21:27:15.796Z,1516742835.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:16.166Z,1516742836.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s. 2018-01-23T21:27:16.171Z,1516742836.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:16.598Z,1516742836.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s. 2018-01-23T21:27:16.599Z,1516742836.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:16.985Z,1516742836.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s. 2018-01-23T21:27:16.986Z,1516742836.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:17.374Z,1516742837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s. 2018-01-23T21:27:17.379Z,1516742837.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:17.792Z,1516742837.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s. 2018-01-23T21:27:17.793Z,1516742837.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:18.180Z,1516742838.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s. 2018-01-23T21:27:18.181Z,1516742838.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:18.589Z,1516742838.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s. 2018-01-23T21:27:18.590Z,1516742838.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:18.987Z,1516742838.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s. 2018-01-23T21:27:18.988Z,1516742838.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:19.390Z,1516742839.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s. 2018-01-23T21:27:19.395Z,1516742839.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:19.773Z,1516742839.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s. 2018-01-23T21:27:19.773Z,1516742839.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:20.164Z,1516742840.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s. 2018-01-23T21:27:20.165Z,1516742840.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:20.594Z,1516742840.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s. 2018-01-23T21:27:20.600Z,1516742840.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:20.997Z,1516742840.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s. 2018-01-23T21:27:20.998Z,1516742840.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:21.372Z,1516742841.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s. 2018-01-23T21:27:21.373Z,1516742841.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:21.793Z,1516742841.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s. 2018-01-23T21:27:21.794Z,1516742841.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:22.166Z,1516742842.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s. 2018-01-23T21:27:22.171Z,1516742842.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:22.606Z,1516742842.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s. 2018-01-23T21:27:22.607Z,1516742842.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:23.009Z,1516742843.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s. 2018-01-23T21:27:23.015Z,1516742843.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:23.410Z,1516742843.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s. 2018-01-23T21:27:23.415Z,1516742843.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:23.776Z,1516742843.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s. 2018-01-23T21:27:23.777Z,1516742843.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:24.182Z,1516742844.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s. 2018-01-23T21:27:24.187Z,1516742844.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:24.598Z,1516742844.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s. 2018-01-23T21:27:24.622Z,1516742844.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:24.979Z,1516742844.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s. 2018-01-23T21:27:24.980Z,1516742844.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:25.378Z,1516742845.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s. 2018-01-23T21:27:25.380Z,1516742845.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:25.831Z,1516742845.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s. 2018-01-23T21:27:25.832Z,1516742845.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:26.194Z,1516742846.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s. 2018-01-23T21:27:26.195Z,1516742846.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:26.563Z,1516742846.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s. 2018-01-23T21:27:26.564Z,1516742846.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:26.962Z,1516742846.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s. 2018-01-23T21:27:26.963Z,1516742846.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:27.397Z,1516742847.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s. 2018-01-23T21:27:27.398Z,1516742847.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:27.764Z,1516742847.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s. 2018-01-23T21:27:27.765Z,1516742847.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:28.164Z,1516742848.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s. 2018-01-23T21:27:28.165Z,1516742848.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:28.572Z,1516742848.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s. 2018-01-23T21:27:28.573Z,1516742848.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:28.971Z,1516742848.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s. 2018-01-23T21:27:28.972Z,1516742848.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:29.414Z,1516742849.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s. 2018-01-23T21:27:29.423Z,1516742849.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:29.780Z,1516742849.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s. 2018-01-23T21:27:29.781Z,1516742849.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:30.145Z,1516742850.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s. 2018-01-23T21:27:30.145Z,1516742850.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:30.553Z,1516742850.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s. 2018-01-23T21:27:30.554Z,1516742850.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:30.957Z,1516742850.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s. 2018-01-23T21:27:30.958Z,1516742850.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:31.386Z,1516742851.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:31.785Z,1516742851.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:32.189Z,1516742852.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:32.627Z,1516742852.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:32.985Z,1516742852.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:33.403Z,1516742853.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:33.798Z,1516742853.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:34.204Z,1516742854.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:34.588Z,1516742854.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:34.987Z,1516742854.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:35.374Z,1516742855.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:35.767Z,1516742855.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:36.157Z,1516742856.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:36.563Z,1516742856.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:36.962Z,1516742856.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:37.365Z,1516742857.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:37.770Z,1516742857.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:38.171Z,1516742858.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:38.575Z,1516742858.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:38.961Z,1516742858.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:39.367Z,1516742859.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:39.758Z,1516742859.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:40.164Z,1516742860.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:40.571Z,1516742860.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:40.967Z,1516742860.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:41.374Z,1516742861.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:41.773Z,1516742861.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:42.158Z,1516742862.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:42.564Z,1516742862.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:42.973Z,1516742862.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:43.361Z,1516742863.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:43.767Z,1516742863.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:44.179Z,1516742864.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:44.571Z,1516742864.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:44.968Z,1516742864.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:45.364Z,1516742865.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:45.769Z,1516742865.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:46.152Z,1516742866.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:46.577Z,1516742866.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:46.979Z,1516742866.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:47.389Z,1516742867.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:47.783Z,1516742867.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:48.158Z,1516742868.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:48.562Z,1516742868.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:51.691Z,1516742871.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:51.839Z,1516742871.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:52.165Z,1516742872.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:52.566Z,1516742872.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:52.966Z,1516742872.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:53.358Z,1516742873.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:53.756Z,1516742873.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:54.159Z,1516742874.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:54.556Z,1516742874.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:54.966Z,1516742874.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:55.402Z,1516742875.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:55.782Z,1516742875.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:56.192Z,1516742876.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:56.573Z,1516742876.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:56.989Z,1516742876.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:57.391Z,1516742877.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:57.822Z,1516742877.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:58.225Z,1516742878.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:58.627Z,1516742878.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:58.986Z,1516742878.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:59.392Z,1516742879.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:27:59.774Z,1516742879.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:00.170Z,1516742880.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:00.628Z,1516742880.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:01.006Z,1516742881.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:01.382Z,1516742881.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:01.805Z,1516742881.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:02.185Z,1516742882.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:02.574Z,1516742882.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:02.968Z,1516742882.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:03.370Z,1516742883.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:03.884Z,1516742883.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:04.174Z,1516742884.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:04.578Z,1516742884.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:04.968Z,1516742884.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:05.368Z,1516742885.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:05.770Z,1516742885.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:06.168Z,1516742886.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:06.568Z,1516742886.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:06.986Z,1516742886.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:07.379Z,1516742887.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:07.780Z,1516742887.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:08.161Z,1516742888.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:08.569Z,1516742888.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:08.948Z,1516742888.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:09.351Z,1516742889.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:09.773Z,1516742889.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:10.174Z,1516742890.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:10.578Z,1516742890.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:10.968Z,1516742890.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:11.377Z,1516742891.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:11.784Z,1516742891.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:12.158Z,1516742892.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:12.592Z,1516742892.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:13.000Z,1516742893.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:13.402Z,1516742893.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:13.795Z,1516742893.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:14.166Z,1516742894.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:14.629Z,1516742894.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:14.959Z,1516742894.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:15.355Z,1516742895.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:15.797Z,1516742895.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:16.206Z,1516742896.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:16.588Z,1516742896.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:16.983Z,1516742896.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:17.409Z,1516742897.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:17.802Z,1516742897.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:18.173Z,1516742898.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:18.566Z,1516742898.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:19.018Z,1516742899.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:19.420Z,1516742899.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:19.783Z,1516742899.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:20.183Z,1516742900.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:20.591Z,1516742900.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:21.007Z,1516742901.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:21.583Z,1516742901.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:21.806Z,1516742901.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:22.199Z,1516742902.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:22.737Z,1516742902.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:23.321Z,1516742903.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:23.513Z,1516742903.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:23.884Z,1516742903.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:24.309Z,1516742904.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:24.718Z,1516742904.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:25.064Z,1516742905.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:25.522Z,1516742905.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2018-01-23T21:28:25.890Z,1516742905.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ =